summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--board/keymile/common/common.c13
-rw-r--r--board/keymile/common/ivm.c48
-rw-r--r--board/keymile/km82xx/km82xx.c8
-rw-r--r--board/keymile/km83xx/km83xx.c103
-rw-r--r--board/keymile/scripts/develop-common.txt5
-rw-r--r--board/keymile/scripts/ramfs-common.txt5
-rw-r--r--boards.cfg7
-rw-r--r--drivers/mtd/nand/kmeter1_nand.c4
-rw-r--r--include/configs/km/keymile-common.h12
-rw-r--r--include/configs/km/km8309-common.h4
-rw-r--r--include/configs/km/km8321-common.h2
-rw-r--r--include/configs/km/km83xx-common.h9
-rw-r--r--include/configs/km8360.h2
-rw-r--r--include/configs/suvd3.h37
-rw-r--r--include/configs/tuxx1.h46
15 files changed, 226 insertions, 79 deletions
diff --git a/board/keymile/common/common.c b/board/keymile/common/common.c
index 6f407b7..ef93ed3 100644
--- a/board/keymile/common/common.c
+++ b/board/keymile/common/common.c
@@ -38,9 +38,7 @@
#include "post.h"
#endif
#include "common.h"
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
#include <i2c.h>
-#endif
#if !defined(CONFIG_MPC83xx)
static void i2c_write_start_seq(void);
@@ -185,17 +183,6 @@ void i2c_init_board(void)
}
#endif
-
-#if !defined(MACH_TYPE_KM_KIRKWOOD)
-int ethernet_present(void)
-{
- struct km_bec_fpga *base =
- (struct km_bec_fpga *)CONFIG_SYS_KMBEC_FPGA_BASE;
-
- return in_8(&base->bprth) & PIGGY_PRESENT;
-}
-#endif
-
int board_eth_init(bd_t *bis)
{
if (ethernet_present())
diff --git a/board/keymile/common/ivm.c b/board/keymile/common/ivm.c
index eaa924f..22d5256 100644
--- a/board/keymile/common/ivm.c
+++ b/board/keymile/common/ivm.c
@@ -201,6 +201,22 @@ static int ivm_check_crc(unsigned char *buf, int block)
return 0;
}
+static int calculate_mac_offset(unsigned char *valbuf, unsigned char *buf,
+ int offset)
+{
+ unsigned long val = (buf[4] << 16) + (buf[5] << 8) + buf[6];
+
+ if (offset == 0)
+ return 0;
+
+ val += offset;
+ buf[4] = (val >> 16) & 0xff;
+ buf[5] = (val >> 8) & 0xff;
+ buf[6] = val & 0xff;
+ sprintf((char *)valbuf, "%pM", buf + 1);
+ return 0;
+}
+
static int ivm_analyze_block2(unsigned char *buf, int len)
{
unsigned char valbuf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN];
@@ -210,24 +226,20 @@ static int ivm_analyze_block2(unsigned char *buf, int len)
sprintf((char *)valbuf, "%pM", buf + 1);
ivm_set_value("IVM_MacAddress", (char *)valbuf);
/* if an offset is defined, add it */
-#if defined(CONFIG_PIGGY_MAC_ADRESS_OFFSET)
- if (CONFIG_PIGGY_MAC_ADRESS_OFFSET > 0) {
- unsigned long val = (buf[4] << 16) + (buf[5] << 8) + buf[6];
-
- val += CONFIG_PIGGY_MAC_ADRESS_OFFSET;
- buf[4] = (val >> 16) & 0xff;
- buf[5] = (val >> 8) & 0xff;
- buf[6] = val & 0xff;
- sprintf((char *)valbuf, "%pM", buf + 1);
- }
-#endif
+ calculate_mac_offset(buf, valbuf, CONFIG_PIGGY_MAC_ADRESS_OFFSET);
#ifdef MACH_TYPE_KM_KIRKWOOD
setenv((char *)"ethaddr", (char *)valbuf);
#else
if (getenv("ethaddr") == NULL)
setenv((char *)"ethaddr", (char *)valbuf);
#endif
-
+#ifdef CONFIG_KMVECT1
+/* KMVECT1 has two ethernet interfaces */
+ if (getenv("eth1addr") == NULL) {
+ calculate_mac_offset(buf, valbuf, 1);
+ setenv((char *)"eth1addr", (char *)valbuf);
+ }
+#endif
/* IVM_MacCount */
count = (buf[10] << 24) +
(buf[11] << 16) +
@@ -312,27 +324,15 @@ int ivm_read_eeprom(void)
#if defined(CONFIG_I2C_MUX)
/* First init the Bus, select the Bus */
-#if defined(CONFIG_SYS_I2C_IVM_BUS)
- dev = i2c_mux_ident_muxstring((uchar *)CONFIG_SYS_I2C_IVM_BUS);
-#else
buf = (unsigned char *) getenv("EEprom_ivm");
if (buf != NULL)
dev = i2c_mux_ident_muxstring(buf);
-#endif
if (dev == NULL) {
printf("Error couldnt add Bus for IVM\n");
return -1;
}
i2c_set_bus_num(dev->busid);
#endif
-
- buf = (unsigned char *) getenv("EEprom_ivm_addr");
- if (buf != NULL) {
- ret = strict_strtoul((char *)buf, 16, &dev_addr);
- if (ret != 0)
- return -3;
- }
-
/* add deblocking here */
i2c_make_abort();
diff --git a/board/keymile/km82xx/km82xx.c b/board/keymile/km82xx/km82xx.c
index 67b69f6..defc885 100644
--- a/board/keymile/km82xx/km82xx.c
+++ b/board/keymile/km82xx/km82xx.c
@@ -385,6 +385,14 @@ void handle_mgcoge3un_reset(void)
}
#endif
+int ethernet_present(void)
+{
+ struct km_bec_fpga *base =
+ (struct km_bec_fpga *)CONFIG_SYS_KMBEC_FPGA_BASE;
+
+ return in_8(&base->bprth) & PIGGY_PRESENT;
+}
+
/*
* Early board initalization.
*/
diff --git a/board/keymile/km83xx/km83xx.c b/board/keymile/km83xx/km83xx.c
index 83a8753..faaa39b 100644
--- a/board/keymile/km83xx/km83xx.c
+++ b/board/keymile/km83xx/km83xx.c
@@ -98,17 +98,13 @@ const qe_iop_conf_t qe_iop_conf_tab[] = {
static int board_init_i2c_busses(void)
{
I2C_MUX_DEVICE *dev = NULL;
- uchar *buf;
+ uchar *dtt_bus = (uchar *)"pca9547:70:a";
/* Set up the Bus for the DTTs */
- buf = (unsigned char *) getenv("dtt_bus");
- if (buf != NULL)
- dev = i2c_mux_ident_muxstring(buf);
- if (dev == NULL) {
+ dev = i2c_mux_ident_muxstring(dtt_bus);
+ if (dev == NULL)
printf("Error couldn't add Bus for DTT\n");
- printf("please setup dtt_bus to where your\n");
- printf("DTT is found.\n");
- }
+
return 0;
}
@@ -133,6 +129,28 @@ const uint upma_table[] = {
};
#endif
+static int piggy_present(void)
+{
+ struct km_bec_fpga __iomem *base =
+ (struct km_bec_fpga __iomem *)CONFIG_SYS_KMBEC_FPGA_BASE;
+
+ return in_8(&base->bprth) & PIGGY_PRESENT;
+}
+
+#if defined(CONFIG_KMVECT1)
+int ethernet_present(void)
+{
+ /* ethernet port connected to simple switch without piggy */
+ return 1;
+}
+#else
+int ethernet_present(void)
+{
+ return piggy_present();
+}
+#endif
+
+
int board_early_init_r(void)
{
struct km_bec_fpga *base =
@@ -193,8 +211,75 @@ int misc_init_r(void)
return 0;
}
+#if defined(CONFIG_KMVECT1)
+#include <mv88e6352.h>
+/* Marvell MV88E6122 switch configuration */
+static struct mv88e_sw_reg extsw_conf[] = {
+ /* port 1, FRONT_MDI, autoneg */
+ { PORT(1), PORT_PHY, NO_SPEED_FOR },
+ { PORT(1), PORT_CTRL, FORWARDING | EGRS_FLD_ALL },
+ { PHY(1), PHY_1000_CTRL, NO_ADV },
+ { PHY(1), PHY_SPEC_CTRL, AUTO_MDIX_EN },
+ { PHY(1), PHY_CTRL, PHY_100_MBPS | AUTONEG_EN | AUTONEG_RST |
+ FULL_DUPLEX },
+ /* port 2, unused */
+ { PORT(2), PORT_CTRL, PORT_DIS },
+ { PHY(2), PHY_CTRL, PHY_PWR_DOWN },
+ { PHY(2), PHY_SPEC_CTRL, SPEC_PWR_DOWN },
+ /* port 3, BP_MII (CPU), PHY mode, 100BASE */
+ { PORT(3), PORT_CTRL, FORWARDING | EGRS_FLD_ALL },
+ /* port 4, ESTAR to slot 11, SerDes, 1000BASE-X */
+ { PORT(4), PORT_STATUS, NO_PHY_DETECT },
+ { PORT(4), PORT_PHY, SPEED_1000_FOR },
+ { PORT(4), PORT_CTRL, FORWARDING | EGRS_FLD_ALL },
+ /* port 5, ESTAR to slot 13, SerDes, 1000BASE-X */
+ { PORT(5), PORT_STATUS, NO_PHY_DETECT },
+ { PORT(5), PORT_PHY, SPEED_1000_FOR },
+ { PORT(5), PORT_CTRL, FORWARDING | EGRS_FLD_ALL },
+ /*
+ * Errata Fix: 1.9V Output from Internal 1.8V Regulator,
+ * acc . MV-S300889-00D.pdf , clause 4.5
+ */
+ { PORT(5), 0x1A, 0xADB1 },
+ /* port 6, unused, this port has no phy */
+ { PORT(6), PORT_CTRL, PORT_DIS },
+};
+#endif
+
int last_stage_init(void)
{
+#if defined(CONFIG_KMVECT1)
+ struct km_bec_fpga __iomem *base =
+ (struct km_bec_fpga __iomem *)CONFIG_SYS_KMBEC_FPGA_BASE;
+ u8 tmp_reg;
+
+ /* Release mv88e6122 from reset */
+ tmp_reg = in_8(&base->res1[0]) | 0x10; /* DIRECT3 register */
+ out_8(&base->res1[0], tmp_reg); /* GP28 as output */
+ tmp_reg = in_8(&base->gprt3) | 0x10; /* GP28 to high */
+ out_8(&base->gprt3, tmp_reg);
+
+ /* configure MV88E6122 switch */
+ char *name = "UEC2";
+
+ if (miiphy_set_current_dev(name))
+ return 0;
+
+ mv88e_sw_program(name, CONFIG_KM_MVEXTSW_ADDR, extsw_conf,
+ ARRAY_SIZE(extsw_conf));
+
+ mv88e_sw_reset(name, CONFIG_KM_MVEXTSW_ADDR);
+
+ if (piggy_present()) {
+ setenv("ethact", "UEC2");
+ setenv("netdev", "eth1");
+ puts("using PIGGY for network boot\n");
+ } else {
+ setenv("netdev", "eth0");
+ puts("using frontport for network boot\n");
+ }
+#endif
+
#if defined(CONFIG_KMCOGE5NE)
struct bfticu_iomap *base =
(struct bfticu_iomap *)CONFIG_SYS_BFTIC3_BASE;
@@ -280,7 +365,7 @@ int checkboard(void)
{
puts("Board: Keymile " CONFIG_KM_BOARD_NAME);
- if (ethernet_present())
+ if (piggy_present())
puts(" with PIGGY.");
puts("\n");
return 0;
diff --git a/board/keymile/scripts/develop-common.txt b/board/keymile/scripts/develop-common.txt
index aa3d659..a6bb1b1 100644
--- a/board/keymile/scripts/develop-common.txt
+++ b/board/keymile/scripts/develop-common.txt
@@ -1,8 +1,9 @@
altbootcmd=run ${subbootcmds}
bootcmd=run ${subbootcmds}
-configure=km_setboardid && saveenv && reset
+configure=run set_uimage; km_setboardid && saveenv && reset
subbootcmds=tftpfdt tftpkernel nfsargs add_default boot
nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${toolchain}/${arch}
-tftpkernel=tftpboot ${load_addr_r} ${hostname}/uImage
+tftpkernel=tftpboot ${load_addr_r} ${hostname}/${uimage}
toolchain=/opt/eldk
rootfssize=0
+set_uimage=printenv uimage || setenv uimage uImage
diff --git a/board/keymile/scripts/ramfs-common.txt b/board/keymile/scripts/ramfs-common.txt
index c1b45ab..8a8d287 100644
--- a/board/keymile/scripts/ramfs-common.txt
+++ b/board/keymile/scripts/ramfs-common.txt
@@ -4,8 +4,9 @@ altbootcmd=run ${subbootcmds}
bootcmd=run ${subbootcmds}
subbootcmds=tftpfdt tftpkernel setrootfsaddr tftpramfs flashargs add_default addpanic addramfs boot
nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath}
-configure=km_setboardid && saveenv && reset
+configure=run set_uimage; km_setboardid && saveenv && reset
rootfsfile=${hostname}/rootfsImage
setrootfsaddr=setexpr value ${pnvramaddr} - ${rootfssize} && setenv rootfsaddr 0x${value}
-tftpkernel=tftpboot ${load_addr_r} ${hostname}/uImage
+tftpkernel=tftpboot ${load_addr_r} ${hostname}/${uimage}
tftpramfs=tftpboot ${rootfsaddr} ${hostname}/rootfsImage
+set_uimage=printenv uimage || setenv uimage uImage
diff --git a/boards.cfg b/boards.cfg
index b1319aa..7f772a0 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -705,9 +705,10 @@ SIMPC8313_SP powerpc mpc83xx simpc8313 sheldon
TQM834x powerpc mpc83xx tqm834x tqc
suvd3 powerpc mpc83xx km83xx keymile - suvd3:SUVD3
kmvect1 powerpc mpc83xx km83xx keymile - suvd3:KMVECT1
-tuge1 powerpc mpc83xx km83xx keymile - tuxx1:KM_DISABLE_APP2,TUGE1
-tuxx1 powerpc mpc83xx km83xx keymile
-kmsupx5 powerpc mpc83xx km83xx keymile - tuxx1:KM_DISABLE_APP2,KMSUPX5
+tuge1 powerpc mpc83xx km83xx keymile - tuxx1:TUGE1
+tuxx1 powerpc mpc83xx km83xx keymile - tuxx1:TUXX1
+kmopti2 powerpc mpc83xx km83xx keymile - tuxx1:KMOPTI2
+kmsupx5 powerpc mpc83xx km83xx keymile - tuxx1:KMSUPX5
sbc8548 powerpc mpc85xx sbc8548 - - sbc8548
sbc8548_PCI_33 powerpc mpc85xx sbc8548 - - sbc8548:PCI,33
sbc8548_PCI_33_PCIE powerpc mpc85xx sbc8548 - - sbc8548:PCI,33,PCIE
diff --git a/drivers/mtd/nand/kmeter1_nand.c b/drivers/mtd/nand/kmeter1_nand.c
index e8e5b7b..f044597 100644
--- a/drivers/mtd/nand/kmeter1_nand.c
+++ b/drivers/mtd/nand/kmeter1_nand.c
@@ -119,7 +119,11 @@ static int kpn_nand_dev_ready(struct mtd_info *mtd)
int board_nand_init(struct nand_chip *nand)
{
+#if defined(CONFIG_NAND_ECC_BCH)
+ nand->ecc.mode = NAND_ECC_SOFT_BCH;
+#else
nand->ecc.mode = NAND_ECC_SOFT;
+#endif
/* Reference hardware control function */
nand->cmd_ctrl = kpn_nand_hwcontrol;
diff --git a/include/configs/km/keymile-common.h b/include/configs/km/keymile-common.h
index f64748e..796f330 100644
--- a/include/configs/km/keymile-common.h
+++ b/include/configs/km/keymile-common.h
@@ -148,6 +148,14 @@
"ubi part " CONFIG_KM_UBI_PARTITION_NAME_APP "; fi\0"
#endif /* CONFIG_KM_UBI_PARTITION_NAME_APP */
+#ifdef CONFIG_NAND_ECC_BCH
+#define CONFIG_KM_UIMAGE_NAME "ecc_bch_uImage\0"
+#define CONFIG_KM_ECC_MODE " eccmode=bch"
+#else
+#define CONFIG_KM_UIMAGE_NAME "uImage\0"
+#define CONFIG_KM_ECC_MODE
+#endif
+
/*
* boottargets
* - set 'subbootcmds'
@@ -184,6 +192,7 @@
":${hostname}:${netdev}:off3" \
" console=" CONFIG_KM_CONSOLE_TTY ",${baudrate}" \
" mem=${kernelmem} init=${init}" \
+ CONFIG_KM_ECC_MODE \
" phram.phram=phvar,${varaddr}," __stringify(CONFIG_KM_PHRAM)\
" " CONFIG_KM_UBI_LINUX_MTD " " \
CONFIG_KM_DEF_BOOT_ARGS_CPU \
@@ -210,9 +219,10 @@
*/
#define CONFIG_KM_DEF_ENV_FLASH_BOOT \
"cramfsaddr=" __stringify(CONFIG_KM_CRAMFS_ADDR) "\0" \
- "cramfsloadkernel=cramfsload ${load_addr_r} uImage\0" \
+ "cramfsloadkernel=cramfsload ${load_addr_r} ${uimage}\0" \
"ubicopy=ubi read "__stringify(CONFIG_KM_CRAMFS_ADDR) \
" bootfs${boot_bank}\0" \
+ "uimage=" CONFIG_KM_UIMAGE_NAME \
CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI
/*
diff --git a/include/configs/km/km8309-common.h b/include/configs/km/km8309-common.h
index b36e892..7f9cffa 100644
--- a/include/configs/km/km8309-common.h
+++ b/include/configs/km/km8309-common.h
@@ -22,7 +22,7 @@
#define CONFIG_MPC830x 1 /* MPC830x family */
#define CONFIG_MPC8309 1 /* MPC8309 CPU specific */
-#define CONFIG_KM_DEF_ARCH "arch=ppc_8xx\0"
+#define CONFIG_KM_DEF_ARCH "arch=ppc_82xx\0"
#define CONFIG_CMD_DIAG 1
/* include common defines/options for all 83xx Keymile boards */
@@ -33,8 +33,6 @@
/* at end of uboot partition, before env */
#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xF00B0000
-#define CONFIG_MISC_INIT_R
-
/*
* System IO Config
*/
diff --git a/include/configs/km/km8321-common.h b/include/configs/km/km8321-common.h
index 8ad6fc3..abb9081 100644
--- a/include/configs/km/km8321-common.h
+++ b/include/configs/km/km8321-common.h
@@ -38,8 +38,6 @@
/* include common defines/options for all 83xx Keymile boards */
#include "km83xx-common.h"
-#define CONFIG_MISC_INIT_R
-
/*
* System IO Config
*/
diff --git a/include/configs/km/km83xx-common.h b/include/configs/km/km83xx-common.h
index a9823d6..eb0e5b6 100644
--- a/include/configs/km/km83xx-common.h
+++ b/include/configs/km/km83xx-common.h
@@ -165,19 +165,15 @@
#define CONFIG_UEC_ETH
#define CONFIG_ETHPRIME "UEC0"
+#if !defined(CONFIG_MPC8309)
#define CONFIG_UEC_ETH1 /* GETH1 */
#define UEC_VERBOSE_DEBUG 1
+#endif
#ifdef CONFIG_UEC_ETH1
-#if defined(CONFIG_MPC8309)
-#define CONFIG_SYS_UEC1_UCC_NUM 2 /* UCC3 */
-#define CONFIG_SYS_UEC1_RX_CLK QE_CLK_NONE /* not used in RMII Mode */
-#define CONFIG_SYS_UEC1_TX_CLK QE_CLK12
-#else
#define CONFIG_SYS_UEC1_UCC_NUM 3 /* UCC4 */
#define CONFIG_SYS_UEC1_RX_CLK QE_CLK_NONE /* not used in RMII Mode */
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK17
-#endif
#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR 0
#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
@@ -316,7 +312,6 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
CONFIG_KM_DEF_ENV \
CONFIG_KM_DEF_ARCH \
- "dtt_bus=pca9547:70:a\0" \
"EEprom_ivm=pca9547:70:9\0" \
"newenv=" \
"prot off 0xF00C0000 +0x40000 && " \
diff --git a/include/configs/km8360.h b/include/configs/km8360.h
index 7631ab6..5b191bc 100644
--- a/include/configs/km8360.h
+++ b/include/configs/km8360.h
@@ -25,6 +25,8 @@
#define CONFIG_KM_BOARD_NAME "kmcoge5ne"
#define CONFIG_KM_DEF_NETDEV "netdev=eth1\0"
#define CONFIG_CMD_NAND
+#define CONFIG_NAND_ECC_BCH
+#define CONFIG_BCH
#define CONFIG_NAND_KMETER1
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define NAND_MAX_CHIPS 1
diff --git a/include/configs/suvd3.h b/include/configs/suvd3.h
index c50832c..bbf9da5 100644
--- a/include/configs/suvd3.h
+++ b/include/configs/suvd3.h
@@ -110,4 +110,41 @@
BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U
+/*
+ * QE UEC ethernet configuration
+ */
+#if defined(CONFIG_KMVECT1)
+#define CONFIG_MV88E6352_SWITCH
+#define CONFIG_KM_MVEXTSW_ADDR 0x10
+
+/* ethernet port connected to simple switch 88e6122 (UEC0) */
+#define CONFIG_UEC_ETH1
+#define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */
+#define CONFIG_SYS_UEC1_RX_CLK QE_CLK9
+#define CONFIG_SYS_UEC1_TX_CLK QE_CLK10
+
+#define CONFIG_FIXED_PHY 0xFFFFFFFF
+#define CONFIG_SYS_FIXED_PHY_ADDR 0x1E /* unused address */
+#define CONFIG_SYS_FIXED_PHY_PORT(devnum, speed, duplex) \
+ {devnum, speed, duplex}
+#define CONFIG_SYS_FIXED_PHY_PORTS \
+ CONFIG_SYS_FIXED_PHY_PORT("UEC0", SPEED_100, DUPLEX_FULL)
+
+#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH
+#define CONFIG_SYS_UEC1_PHY_ADDR CONFIG_SYS_FIXED_PHY_ADDR
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_MII
+#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
+
+/* ethernet port connected to piggy (UEC2) */
+#define CONFIG_HAS_ETH1
+#define CONFIG_UEC_ETH2
+#define CONFIG_SYS_UEC2_UCC_NUM 2 /* UCC3 */
+#define CONFIG_SYS_UEC2_RX_CLK QE_CLK_NONE /* not used in RMII Mode */
+#define CONFIG_SYS_UEC2_TX_CLK QE_CLK12
+#define CONFIG_SYS_UEC2_ETH_TYPE FAST_ETH
+#define CONFIG_SYS_UEC2_PHY_ADDR 0
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
+#define CONFIG_SYS_UEC2_INTERFACE_SPEED 100
+#endif /* CONFIG_KMVECT1 */
+
#endif /* __CONFIG_H */
diff --git a/include/configs/tuxx1.h b/include/configs/tuxx1.h
index 90d2e61..6caf23a 100644
--- a/include/configs/tuxx1.h
+++ b/include/configs/tuxx1.h
@@ -11,7 +11,7 @@
* (C) Copyright 2008
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
*
- * (C) Copyright 2010-2012
+ * (C) Copyright 2010-2013
* Lukas Roggli, KEYMILE Ltd, lukas.roggli@keymile.com
* Holger Brunck, Keymile GmbH, holger.bruncl@keymile.com
*
@@ -27,16 +27,20 @@
/*
* High Level Configuration Options
*/
-#ifdef CONFIG_KMSUPX5
+#if defined(CONFIG_KMSUPX5)
#define CONFIG_KM_BOARD_NAME "kmsupx5"
#define CONFIG_HOSTNAME kmsupx5
-#elif defined CONFIG_TUGE1
+#elif defined(CONFIG_TUGE1)
#define CONFIG_KM_BOARD_NAME "tuge1"
#define CONFIG_HOSTNAME tuge1
-#else
-#define CONFIG_TUXXX /* TUXX1 board (tuxa1/tuda1) specific */
+#elif defined(CONFIG_TUXX1) /* TUXX1 board (tuxa1/tuda1) specific */
#define CONFIG_KM_BOARD_NAME "tuxx1"
#define CONFIG_HOSTNAME tuxx1
+#elif defined(CONFIG_KMOPTI2)
+#define CONFIG_KM_BOARD_NAME "kmopti2"
+#define CONFIG_HOSTNAME kmopti2
+#else
+#error ("Board not supported")
#endif
#define CONFIG_SYS_TEXT_BASE 0xF0000000
@@ -46,18 +50,18 @@
#define CONFIG_SYS_APP1_BASE 0xA0000000 /* PAXG */
#define CONFIG_SYS_APP1_SIZE 256 /* Megabytes */
-#ifndef CONFIG_KM_DISABLE_APP2
+#if defined(CONFIG_TUXX1) || defined(CONFIG_KMOPTI2)
#define CONFIG_SYS_APP2_BASE 0xB0000000 /* PINC3 */
#define CONFIG_SYS_APP2_SIZE 256 /* Megabytes */
#endif
/*
* Init Local Bus Memory Controller:
- *
- * Bank Bus Machine PortSz Size Device on TUDA1 TUXA1 TUGE1 KMSUPX4
- * ---- --- ------- ------ ----- ---------------------------------------
- * 2 Local GPCM 8 bit 256MB PAXG LPXF PAXI LPXF
- * 3 Local GPCM 8 bit 256MB PINC3 PINC2 unused unused
+ * Device on
+ * Bank Bus Machine PortSz Size TUDA1 TUXA1 TUGE1 KMSUPX4 KMOPTI2
+ * ---- --- ------- ------ ----- ---------------------------------------
+ * 2 Local GPCM 8 bit 256MB PAXG LPXF PAXI LPXF PAXE
+ * 3 Local GPCM 8 bit 256MB PINC3 PINC2 unused unused OPI2(16 bit)
*
*/
@@ -81,7 +85,7 @@
OR_GPCM_TRLX_SET | \
OR_GPCM_EHTR_CLEAR | \
OR_GPCM_EAD)
-#ifndef CONFIG_KM_DISABLE_APP2
+#if defined(CONFIG_TUXX1)
/*
* Configuration for C3 on the local bus
*/
@@ -107,6 +111,22 @@
MxMR_WLFx_2X)
#endif
+#if defined(CONFIG_KMOPTI2)
+/*
+ * Configuration for C3 on the local bus
+ */
+#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_APP2_BASE
+#define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_256MB)
+#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_APP2_BASE | \
+ BR_PS_16 | \
+ BR_MS_GPCM | \
+ BR_V)
+#define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_APP2_SIZE) | \
+ OR_GPCM_SCY_4 | \
+ OR_GPCM_TRLX_CLEAR | \
+ OR_GPCM_EHTR_CLEAR)
+#endif
+
/*
* MMU Setup
*/
@@ -125,7 +145,7 @@
BATL_GUARDEDSTORAGE)
#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
-#ifdef CONFIG_KM_DISABLE_APP2
+#if defined(CONFIG_TUGE1) || defined(CONFIG_KMSUPX5)
#define CONFIG_SYS_IBAT6L (0)
#define CONFIG_SYS_IBAT6U (0)
#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L
generated by cgit v1.1 at 2024-11-24 07:26:18 +0000