diff options
-rw-r--r-- | drivers/usb/host/ehci-hcd.c | 138 | ||||
-rw-r--r-- | drivers/usb/host/ehci.h | 49 |
2 files changed, 118 insertions, 69 deletions
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 2a00389..00a155b 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -163,7 +163,7 @@ static int ehci_reset(void) #ifdef CONFIG_USB_EHCI_TXFIFO_THRESH cmd = ehci_readl(&hcor->or_txfilltuning); - cmd &= ~TXFIFO_THRESH(0x3f); + cmd &= ~TXFIFO_THRESH_MASK; cmd |= TXFIFO_THRESH(CONFIG_USB_EHCI_TXFIFO_THRESH); ehci_writel(&hcor->or_txfilltuning, cmd); #endif @@ -186,7 +186,7 @@ static int ehci_td_buffer(struct qTD *td, void *buf, size_t sz) while (idx < QT_BUFFER_CNT) { td->qt_buffer[idx] = cpu_to_hc32(addr); td->qt_buffer_hi[idx] = 0; - next = (addr + 4096) & ~4095; + next = (addr + EHCI_PAGE_SIZE) & ~(EHCI_PAGE_SIZE - 1); delta = next - addr; if (delta >= sz) break; @@ -208,7 +208,8 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer, int length, struct devrequest *req) { ALLOC_ALIGN_BUFFER(struct QH, qh, 1, USB_DMA_MINALIGN); - ALLOC_ALIGN_BUFFER(struct qTD, qtd, 3, USB_DMA_MINALIGN); +#define QTD_COUNT 3 + ALLOC_ALIGN_BUFFER(struct qTD, qtd, QTD_COUNT, USB_DMA_MINALIGN); int qtd_counter = 0; volatile struct qTD *vtd; @@ -230,7 +231,7 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer, le16_to_cpu(req->index)); memset(qh, 0, sizeof(struct QH)); - memset(qtd, 0, 3 * sizeof(*qtd)); + memset(qtd, 0, QTD_COUNT * sizeof(*qtd)); toggle = usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe)); @@ -245,20 +246,17 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer, * - qh_overlay.qt_altnext */ qh->qh_link = cpu_to_hc32((uint32_t)qh_list | QH_LINK_TYPE_QH); - c = (usb_pipespeed(pipe) != USB_SPEED_HIGH && - usb_pipeendpoint(pipe) == 0) ? 1 : 0; - endpt = (8 << 28) | - (c << 27) | - (usb_maxpacket(dev, pipe) << 16) | - (0 << 15) | - (1 << 14) | - (usb_pipespeed(pipe) << 12) | - (usb_pipeendpoint(pipe) << 8) | - (0 << 7) | (usb_pipedevice(pipe) << 0); + c = usb_pipespeed(pipe) != USB_SPEED_HIGH && !usb_pipeendpoint(pipe); + endpt = QH_ENDPT1_RL(8) | QH_ENDPT1_C(c) | + QH_ENDPT1_MAXPKTLEN(usb_maxpacket(dev, pipe)) | QH_ENDPT1_H(0) | + QH_ENDPT1_DTC(QH_ENDPT1_DTC_DT_FROM_QTD) | + QH_ENDPT1_EPS(usb_pipespeed(pipe)) | + QH_ENDPT1_ENDPT(usb_pipeendpoint(pipe)) | QH_ENDPT1_I(0) | + QH_ENDPT1_DEVADDR(usb_pipedevice(pipe)); qh->qh_endpt1 = cpu_to_hc32(endpt); - endpt = (1 << 30) | - (dev->portnr << 23) | - (dev->parent->devnum << 16) | (0 << 8) | (0 << 0); + endpt = QH_ENDPT2_MULT(1) | QH_ENDPT2_PORTNUM(dev->portnr) | + QH_ENDPT2_HUBADDR(dev->parent->devnum) | + QH_ENDPT2_UFCMASK(0) | QH_ENDPT2_UFSMASK(0); qh->qh_endpt2 = cpu_to_hc32(endpt); qh->qh_overlay.qt_next = cpu_to_hc32(QT_NEXT_TERMINATE); @@ -276,12 +274,13 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer, */ qtd[qtd_counter].qt_next = cpu_to_hc32(QT_NEXT_TERMINATE); qtd[qtd_counter].qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE); - token = (0 << 31) | - (sizeof(*req) << 16) | - (0 << 15) | (0 << 12) | (3 << 10) | (2 << 8) | (0x80 << 0); + token = QT_TOKEN_DT(0) | QT_TOKEN_TOTALBYTES(sizeof(*req)) | + QT_TOKEN_IOC(0) | QT_TOKEN_CPAGE(0) | QT_TOKEN_CERR(3) | + QT_TOKEN_PID(QT_TOKEN_PID_SETUP) | + QT_TOKEN_STATUS(QT_TOKEN_STATUS_ACTIVE); qtd[qtd_counter].qt_token = cpu_to_hc32(token); - if (ehci_td_buffer(&qtd[qtd_counter], req, sizeof(*req)) != 0) { - printf("unable construct SETUP td\n"); + if (ehci_td_buffer(&qtd[qtd_counter], req, sizeof(*req))) { + printf("unable to construct SETUP TD\n"); goto fail; } /* Update previous qTD! */ @@ -302,15 +301,14 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer, */ qtd[qtd_counter].qt_next = cpu_to_hc32(QT_NEXT_TERMINATE); qtd[qtd_counter].qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE); - token = (toggle << 31) | - (length << 16) | - ((req == NULL ? 1 : 0) << 15) | - (0 << 12) | - (3 << 10) | - ((usb_pipein(pipe) ? 1 : 0) << 8) | (0x80 << 0); + token = QT_TOKEN_DT(toggle) | QT_TOKEN_TOTALBYTES(length) | + QT_TOKEN_IOC(req == NULL) | QT_TOKEN_CPAGE(0) | + QT_TOKEN_CERR(3) | QT_TOKEN_PID(usb_pipein(pipe) ? + QT_TOKEN_PID_IN : QT_TOKEN_PID_OUT) | + QT_TOKEN_STATUS(QT_TOKEN_STATUS_ACTIVE); qtd[qtd_counter].qt_token = cpu_to_hc32(token); - if (ehci_td_buffer(&qtd[qtd_counter], buffer, length) != 0) { - printf("unable construct DATA td\n"); + if (ehci_td_buffer(&qtd[qtd_counter], buffer, length)) { + printf("unable to construct DATA TD\n"); goto fail; } /* Update previous qTD! */ @@ -328,12 +326,11 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer, */ qtd[qtd_counter].qt_next = cpu_to_hc32(QT_NEXT_TERMINATE); qtd[qtd_counter].qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE); - token = (toggle << 31) | - (0 << 16) | - (1 << 15) | - (0 << 12) | - (3 << 10) | - ((usb_pipein(pipe) ? 0 : 1) << 8) | (0x80 << 0); + token = QT_TOKEN_DT(toggle) | QT_TOKEN_TOTALBYTES(0) | + QT_TOKEN_IOC(1) | QT_TOKEN_CPAGE(0) | QT_TOKEN_CERR(3) | + QT_TOKEN_PID(usb_pipein(pipe) ? + QT_TOKEN_PID_OUT : QT_TOKEN_PID_IN) | + QT_TOKEN_STATUS(QT_TOKEN_STATUS_ACTIVE); qtd[qtd_counter].qt_token = cpu_to_hc32(token); /* Update previous qTD! */ *tdp = cpu_to_hc32((uint32_t)&qtd[qtd_counter]); @@ -346,7 +343,8 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer, flush_dcache_range((uint32_t)qh_list, ALIGN_END_ADDR(struct QH, qh_list, 1)); flush_dcache_range((uint32_t)qh, ALIGN_END_ADDR(struct QH, qh, 1)); - flush_dcache_range((uint32_t)qtd, ALIGN_END_ADDR(struct qTD, qtd, 3)); + flush_dcache_range((uint32_t)qtd, + ALIGN_END_ADDR(struct qTD, qtd, QTD_COUNT)); /* Set async. queue head pointer. */ ehci_writel(&hcor->or_asynclistaddr, (uint32_t)qh_list); @@ -359,10 +357,10 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer, cmd |= CMD_ASE; ehci_writel(&hcor->or_usbcmd, cmd); - ret = handshake((uint32_t *)&hcor->or_usbsts, STD_ASS, STD_ASS, + ret = handshake((uint32_t *)&hcor->or_usbsts, STS_ASS, STS_ASS, 100 * 1000); if (ret < 0) { - printf("EHCI fail timeout STD_ASS set\n"); + printf("EHCI fail timeout STS_ASS set\n"); goto fail; } @@ -377,10 +375,10 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer, invalidate_dcache_range((uint32_t)qh, ALIGN_END_ADDR(struct QH, qh, 1)); invalidate_dcache_range((uint32_t)qtd, - ALIGN_END_ADDR(struct qTD, qtd, 3)); + ALIGN_END_ADDR(struct qTD, qtd, QTD_COUNT)); token = hc32_to_cpu(vtd->qt_token); - if (!(token & 0x80)) + if (!(QT_TOKEN_GET_STATUS(token) & QT_TOKEN_STATUS_ACTIVE)) break; WATCHDOG_RESET(); } while (get_timer(ts) < timeout); @@ -398,50 +396,50 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer, ALIGN((uint32_t)buffer + length, ARCH_DMA_MINALIGN)); /* Check that the TD processing happened */ - if (token & 0x80) { + if (QT_TOKEN_GET_STATUS(token) & QT_TOKEN_STATUS_ACTIVE) printf("EHCI timed out on TD - token=%#x\n", token); - } /* Disable async schedule. */ cmd = ehci_readl(&hcor->or_usbcmd); cmd &= ~CMD_ASE; ehci_writel(&hcor->or_usbcmd, cmd); - ret = handshake((uint32_t *)&hcor->or_usbsts, STD_ASS, 0, + ret = handshake((uint32_t *)&hcor->or_usbsts, STS_ASS, 0, 100 * 1000); if (ret < 0) { - printf("EHCI fail timeout STD_ASS reset\n"); + printf("EHCI fail timeout STS_ASS reset\n"); goto fail; } token = hc32_to_cpu(qh->qh_overlay.qt_token); - if (!(token & 0x80)) { + if (!(QT_TOKEN_GET_STATUS(token) & QT_TOKEN_STATUS_ACTIVE)) { debug("TOKEN=%#x\n", token); - switch (token & 0xfc) { + switch (QT_TOKEN_GET_STATUS(token) & + ~(QT_TOKEN_STATUS_SPLITXSTATE | QT_TOKEN_STATUS_PERR)) { case 0: - toggle = token >> 31; + toggle = QT_TOKEN_GET_DT(token); usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), toggle); dev->status = 0; break; - case 0x40: + case QT_TOKEN_STATUS_HALTED: dev->status = USB_ST_STALLED; break; - case 0xa0: - case 0x20: + case QT_TOKEN_STATUS_ACTIVE | QT_TOKEN_STATUS_DATBUFERR: + case QT_TOKEN_STATUS_DATBUFERR: dev->status = USB_ST_BUF_ERR; break; - case 0x50: - case 0x10: + case QT_TOKEN_STATUS_HALTED | QT_TOKEN_STATUS_BABBLEDET: + case QT_TOKEN_STATUS_BABBLEDET: dev->status = USB_ST_BABBLE_DET; break; default: dev->status = USB_ST_CRC_ERR; - if ((token & 0x40) == 0x40) + if (QT_TOKEN_GET_STATUS(token) & QT_TOKEN_STATUS_HALTED) dev->status |= USB_ST_STALLED; break; } - dev->act_len = length - ((token >> 16) & 0x7fff); + dev->act_len = length - QT_TOKEN_GET_TOTALBYTES(token); } else { dev->act_len = 0; debug("dev=%u, usbsts=%#x, p[1]=%#x, p[2]=%#x\n", @@ -499,12 +497,14 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer, case USB_DT_DEVICE: debug("USB_DT_DEVICE request\n"); srcptr = &descriptor.device; - srclen = 0x12; + srclen = descriptor.device.bLength; break; case USB_DT_CONFIG: debug("USB_DT_CONFIG config\n"); srcptr = &descriptor.config; - srclen = 0x19; + srclen = descriptor.config.bLength + + descriptor.interface.bLength + + descriptor.endpoint.bLength; break; case USB_DT_STRING: debug("USB_DT_STRING config\n"); @@ -539,7 +539,7 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer, case USB_DT_HUB: debug("USB_DT_HUB config\n"); srcptr = &descriptor.hub; - srclen = 0x8; + srclen = descriptor.hub.bLength; break; default: debug("unknown value %x\n", le16_to_cpu(req->value)); @@ -577,13 +577,13 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer, tmpbuf[1] |= USB_PORT_STAT_POWER >> 8; if (ehci_is_TDI()) { - switch ((reg >> 26) & 3) { - case 0: + switch (PORTSC_PSPD(reg)) { + case PORTSC_PSPD_FS: break; - case 1: + case PORTSC_PSPD_LS: tmpbuf[1] |= USB_PORT_STAT_LOW_SPEED >> 8; break; - case 2: + case PORTSC_PSPD_HS: default: tmpbuf[1] |= USB_PORT_STAT_HIGH_SPEED >> 8; break; @@ -729,26 +729,28 @@ int usb_lowlevel_init(void) uint32_t reg; uint32_t cmd; - if (ehci_hcd_init() != 0) + if (ehci_hcd_init()) return -1; /* EHCI spec section 4.1 */ - if (ehci_reset() != 0) + if (ehci_reset()) return -1; #if defined(CONFIG_EHCI_HCD_INIT_AFTER_RESET) - if (ehci_hcd_init() != 0) + if (ehci_hcd_init()) return -1; #endif /* Set head of reclaim list */ memset(qh_list, 0, sizeof(*qh_list)); qh_list->qh_link = cpu_to_hc32((uint32_t)qh_list | QH_LINK_TYPE_QH); - qh_list->qh_endpt1 = cpu_to_hc32((1 << 15) | (USB_SPEED_HIGH << 12)); + qh_list->qh_endpt1 = cpu_to_hc32(QH_ENDPT1_H(1) | + QH_ENDPT1_EPS(USB_SPEED_HIGH)); qh_list->qh_curtd = cpu_to_hc32(QT_NEXT_TERMINATE); qh_list->qh_overlay.qt_next = cpu_to_hc32(QT_NEXT_TERMINATE); qh_list->qh_overlay.qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE); - qh_list->qh_overlay.qt_token = cpu_to_hc32(0x40); + qh_list->qh_overlay.qt_token = + cpu_to_hc32(QT_TOKEN_STATUS(QT_TOKEN_STATUS_HALTED)); reg = ehci_readl(&hccr->cr_hcsparams); descriptor.hub.bNbrPorts = HCS_N_PORTS(reg); @@ -808,7 +810,7 @@ submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer, } if (usb_pipedevice(pipe) == rootdev) { - if (rootdev == 0) + if (!rootdev) dev->speed = USB_SPEED_HIGH; return ehci_submit_root(dev, pipe, buffer, length, setup); } diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 7992983..39acdf9 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -68,7 +68,7 @@ struct ehci_hcor { #define CMD_RESET (1 << 1) /* reset HC not bus */ #define CMD_RUN (1 << 0) /* start/stop HC */ uint32_t or_usbsts; -#define STD_ASS (1 << 15) +#define STS_ASS (1 << 15) #define STS_HALT (1 << 12) uint32_t or_usbintr; #define INTR_UE (1 << 0) /* USB interrupt enable */ @@ -83,11 +83,16 @@ struct ehci_hcor { uint32_t _reserved_0_; uint32_t or_burstsize; uint32_t or_txfilltuning; +#define TXFIFO_THRESH_MASK (0x3f << 16) #define TXFIFO_THRESH(p) ((p & 0x3f) << 16) uint32_t _reserved_1_[6]; uint32_t or_configflag; #define FLAG_CF (1 << 0) /* true: we'll support "high speed" */ uint32_t or_portsc[CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS]; +#define PORTSC_PSPD(x) (((x) >> 26) & 0x3) +#define PORTSC_PSPD_FS 0x0 +#define PORTSC_PSPD_LS 0x1 +#define PORTSC_PSPD_HS 0x2 uint32_t or_systune; } __attribute__ ((packed, aligned(4))); @@ -175,6 +180,27 @@ struct qTD { #define QT_NEXT_TERMINATE 1 uint32_t qt_altnext; /* see EHCI 3.5.2 */ uint32_t qt_token; /* see EHCI 3.5.3 */ +#define QT_TOKEN_DT(x) (((x) & 0x1) << 31) /* Data Toggle */ +#define QT_TOKEN_GET_DT(x) (((x) >> 31) & 0x1) +#define QT_TOKEN_TOTALBYTES(x) (((x) & 0x7fff) << 16) /* Total Bytes to Transfer */ +#define QT_TOKEN_GET_TOTALBYTES(x) (((x) >> 16) & 0x7fff) +#define QT_TOKEN_IOC(x) (((x) & 0x1) << 15) /* Interrupt On Complete */ +#define QT_TOKEN_CPAGE(x) (((x) & 0x7) << 12) /* Current Page */ +#define QT_TOKEN_CERR(x) (((x) & 0x3) << 10) /* Error Counter */ +#define QT_TOKEN_PID(x) (((x) & 0x3) << 8) /* PID Code */ +#define QT_TOKEN_PID_OUT 0x0 +#define QT_TOKEN_PID_IN 0x1 +#define QT_TOKEN_PID_SETUP 0x2 +#define QT_TOKEN_STATUS(x) (((x) & 0xff) << 0) /* Status */ +#define QT_TOKEN_GET_STATUS(x) (((x) >> 0) & 0xff) +#define QT_TOKEN_STATUS_ACTIVE 0x80 +#define QT_TOKEN_STATUS_HALTED 0x40 +#define QT_TOKEN_STATUS_DATBUFERR 0x20 +#define QT_TOKEN_STATUS_BABBLEDET 0x10 +#define QT_TOKEN_STATUS_XACTERR 0x08 +#define QT_TOKEN_STATUS_MISSEDUFRAME 0x04 +#define QT_TOKEN_STATUS_SPLITXSTATE 0x02 +#define QT_TOKEN_STATUS_PERR 0x01 #define QT_BUFFER_CNT 5 uint32_t qt_buffer[QT_BUFFER_CNT]; /* see EHCI 3.5.4 */ uint32_t qt_buffer_hi[QT_BUFFER_CNT]; /* Appendix B */ @@ -182,6 +208,8 @@ struct qTD { uint32_t unused[3]; }; +#define EHCI_PAGE_SIZE 4096 + /* Queue Head (QH). */ struct QH { uint32_t qh_link; @@ -191,7 +219,26 @@ struct QH { #define QH_LINK_TYPE_SITD 4 #define QH_LINK_TYPE_FSTN 6 uint32_t qh_endpt1; +#define QH_ENDPT1_RL(x) (((x) & 0xf) << 28) /* NAK Count Reload */ +#define QH_ENDPT1_C(x) (((x) & 0x1) << 27) /* Control Endpoint Flag */ +#define QH_ENDPT1_MAXPKTLEN(x) (((x) & 0x7ff) << 16) /* Maximum Packet Length */ +#define QH_ENDPT1_H(x) (((x) & 0x1) << 15) /* Head of Reclamation List Flag */ +#define QH_ENDPT1_DTC(x) (((x) & 0x1) << 14) /* Data Toggle Control */ +#define QH_ENDPT1_DTC_IGNORE_QTD_TD 0x0 +#define QH_ENDPT1_DTC_DT_FROM_QTD 0x1 +#define QH_ENDPT1_EPS(x) (((x) & 0x3) << 12) /* Endpoint Speed */ +#define QH_ENDPT1_EPS_FS 0x0 +#define QH_ENDPT1_EPS_LS 0x1 +#define QH_ENDPT1_EPS_HS 0x2 +#define QH_ENDPT1_ENDPT(x) (((x) & 0xf) << 8) /* Endpoint Number */ +#define QH_ENDPT1_I(x) (((x) & 0x1) << 7) /* Inactivate on Next Transaction */ +#define QH_ENDPT1_DEVADDR(x) (((x) & 0x7f) << 0) /* Device Address */ uint32_t qh_endpt2; +#define QH_ENDPT2_MULT(x) (((x) & 0x3) << 30) /* High-Bandwidth Pipe Multiplier */ +#define QH_ENDPT2_PORTNUM(x) (((x) & 0x7f) << 23) /* Port Number */ +#define QH_ENDPT2_HUBADDR(x) (((x) & 0x7f) << 16) /* Hub Address */ +#define QH_ENDPT2_UFCMASK(x) (((x) & 0xff) << 8) /* Split Completion Mask */ +#define QH_ENDPT2_UFSMASK(x) (((x) & 0xff) << 0) /* Interrupt Schedule Mask */ uint32_t qh_curtd; struct qTD qh_overlay; /* |