summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Makefile2
-rw-r--r--arch/arm/cpu/arm1136/start.S254
-rw-r--r--arch/arm/cpu/arm1176/start.S198
-rw-r--r--arch/arm/cpu/arm720t/start.S229
-rw-r--r--arch/arm/cpu/arm720t/tegra-common/cpu.c10
-rw-r--r--arch/arm/cpu/arm720t/tegra30/cpu.c23
-rw-r--r--arch/arm/cpu/arm920t/ep93xx/u-boot.lds3
-rw-r--r--arch/arm/cpu/arm920t/start.S216
-rw-r--r--arch/arm/cpu/arm926ejs/mxs/start.S92
-rw-r--r--arch/arm/cpu/arm926ejs/spear/start.S27
-rw-r--r--arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds1
-rw-r--r--arch/arm/cpu/arm926ejs/start.S262
-rw-r--r--arch/arm/cpu/arm946es/cpu.c13
-rw-r--r--arch/arm/cpu/arm946es/start.S246
-rw-r--r--arch/arm/cpu/arm_intcm/start.S228
-rw-r--r--arch/arm/cpu/armv7/exynos/pinmux.c561
-rw-r--r--arch/arm/cpu/armv7/rmobile/Makefile4
-rw-r--r--arch/arm/cpu/armv7/rmobile/cpu_info-r8a7791.c29
-rw-r--r--arch/arm/cpu/armv7/rmobile/cpu_info-rcar.c (renamed from arch/arm/cpu/armv7/rmobile/cpu_info-r8a7790.c)12
-rw-r--r--arch/arm/cpu/armv7/rmobile/cpu_info.c49
-rw-r--r--arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S20
-rw-r--r--arch/arm/cpu/armv7/socfpga/lowlevel_init.S15
-rw-r--r--arch/arm/cpu/armv7/start.S253
-rw-r--r--arch/arm/cpu/armv7/zynq/u-boot.lds2
-rw-r--r--arch/arm/cpu/pxa/cpuinfo.c6
-rw-r--r--arch/arm/cpu/pxa/start.S253
-rw-r--r--arch/arm/cpu/sa1100/cpu.c14
-rw-r--r--arch/arm/cpu/sa1100/start.S225
-rw-r--r--arch/arm/cpu/tegra-common/pinmux-common.c19
-rw-r--r--arch/arm/cpu/u-boot-spl.lds1
-rw-r--r--arch/arm/cpu/u-boot.lds1
-rw-r--r--arch/arm/dts/exynos4210-origen.dts4
-rw-r--r--arch/arm/dts/exynos4210-trats.dts6
-rw-r--r--arch/arm/dts/exynos4210-universal_c210.dts4
-rw-r--r--arch/arm/dts/exynos4412-trats2.dts4
-rw-r--r--arch/arm/dts/imx6q-sabreauto.dts10
-rw-r--r--arch/arm/imx-common/Makefile1
-rw-r--r--arch/arm/imx-common/iomux-v3.c8
-rw-r--r--arch/arm/imx-common/video.c65
-rw-r--r--arch/arm/include/asm/arch-am33xx/clock.h2
-rw-r--r--arch/arm/include/asm/arch-exynos/cpu.h17
-rw-r--r--arch/arm/include/asm/arch-exynos/gpio.h1761
-rw-r--r--arch/arm/include/asm/arch-mx25/imx-regs.h175
-rw-r--r--arch/arm/include/asm/arch-mx6/mx6sl_pins.h4
-rw-r--r--arch/arm/include/asm/arch-omap5/clock.h3
-rw-r--r--arch/arm/include/asm/arch-omap5/omap.h1
-rw-r--r--arch/arm/include/asm/arch-rmobile/r8a7790.h609
-rw-r--r--arch/arm/include/asm/arch-rmobile/r8a7791.h626
-rw-r--r--arch/arm/include/asm/arch-rmobile/rcar-base.h637
-rw-r--r--arch/arm/include/asm/arch-rmobile/rmobile.h6
-rw-r--r--arch/arm/include/asm/arch-s5pc1xx/gpio.h948
-rw-r--r--arch/arm/include/asm/arch-tegra/gpio.h20
-rw-r--r--arch/arm/include/asm/arch-tegra/pinmux.h5
-rw-r--r--arch/arm/include/asm/arch-tegra/tegra_mmc.h2
-rw-r--r--arch/arm/include/asm/arch-tegra114/pinmux.h1
-rw-r--r--arch/arm/include/asm/arch-tegra124/pinmux.h1
-rw-r--r--arch/arm/include/asm/arch-tegra20/pinmux.h1
-rw-r--r--arch/arm/include/asm/arch-tegra30/pinmux.h1
-rw-r--r--arch/arm/include/asm/imx-common/iomux-v3.h5
-rw-r--r--arch/arm/include/asm/imx-common/video.h24
-rw-r--r--arch/arm/lib/Makefile2
-rw-r--r--arch/arm/lib/cache.c13
-rw-r--r--arch/arm/lib/vectors.S291
-rw-r--r--board/boundary/nitrogen6x/nitrogen6x.c69
-rw-r--r--board/compulab/cm_t335/u-boot.lds1
-rw-r--r--board/embest/mx6boards/Makefile9
-rw-r--r--board/embest/mx6boards/mx6boards.c601
-rw-r--r--board/freescale/mx31ads/u-boot.lds1
-rw-r--r--board/freescale/mx6sabresd/mx6sabresd.c67
-rw-r--r--board/freescale/mx6slevk/mx6slevk.c20
-rw-r--r--board/gateworks/gw_ventana/gw_ventana.c215
-rw-r--r--board/gateworks/gw_ventana/ventana_eeprom.h14
-rw-r--r--board/gumstix/pepper/Makefile13
-rw-r--r--board/gumstix/pepper/board.c226
-rw-r--r--board/gumstix/pepper/board.h19
-rw-r--r--board/gumstix/pepper/mux.c78
-rw-r--r--board/nvidia/jetson-tk1/jetson-tk1.c6
-rw-r--r--board/nvidia/jetson-tk1/pinmux-config-jetson-tk1.h256
-rw-r--r--board/nvidia/venice2/pinmux-config-venice2.h567
-rw-r--r--board/nvidia/venice2/venice2.c19
-rw-r--r--board/renesas/koelsch/koelsch.c194
-rw-r--r--board/renesas/koelsch/qos.c404
-rw-r--r--board/renesas/lager/lager.c196
-rw-r--r--board/renesas/lager/qos.c236
-rw-r--r--board/samsung/arndale/arndale.c11
-rw-r--r--board/samsung/common/misc.c130
-rw-r--r--board/samsung/goni/goni.c32
-rw-r--r--board/samsung/smdk5250/exynos5-dt.c20
-rw-r--r--board/samsung/smdk5250/smdk5250.c19
-rw-r--r--board/samsung/smdk5420/smdk5420.c15
-rw-r--r--board/samsung/smdkc100/smdkc100.c5
-rw-r--r--board/samsung/smdkv310/smdkv310.c19
-rw-r--r--board/samsung/trats/trats.c39
-rw-r--r--board/samsung/trats2/trats2.c74
-rw-r--r--board/samsung/universal_c210/universal.c51
-rw-r--r--board/siemens/common/board.c46
-rw-r--r--board/siemens/draco/Makefile (renamed from board/siemens/dxr2/Makefile)0
-rw-r--r--board/siemens/draco/board.c (renamed from board/siemens/dxr2/board.c)112
-rw-r--r--board/siemens/draco/board.h (renamed from board/siemens/dxr2/board.h)26
-rw-r--r--board/siemens/draco/mux.c (renamed from board/siemens/dxr2/mux.c)2
-rw-r--r--board/siemens/pxm2/board.c10
-rw-r--r--board/siemens/rut/board.c2
-rw-r--r--board/ti/am335x/u-boot.lds1
-rw-r--r--board/wandboard/wandboard.c146
-rw-r--r--boards.cfg9
-rw-r--r--common/spl/spl_nand.c2
-rw-r--r--drivers/gpio/s5p_gpio.c204
-rw-r--r--drivers/gpio/tegra_gpio.c20
-rw-r--r--drivers/mmc/tegra_mmc.c13
-rw-r--r--drivers/mtd/nand/omap_gpmc.c2
-rw-r--r--drivers/power/pmic/Makefile1
-rw-r--r--drivers/power/pmic/pmic_ltc3676.c32
-rw-r--r--drivers/power/pmic/pmic_pfuze100.c2
-rw-r--r--drivers/video/Makefile1
-rw-r--r--drivers/video/imx25lcdc.c121
-rw-r--r--include/configs/beaver.h3
-rw-r--r--include/configs/cardhu.h3
-rw-r--r--include/configs/da850evm.h1
-rw-r--r--include/configs/draco.h92
-rw-r--r--include/configs/dxr2.h4
-rw-r--r--include/configs/embestmx6boards.h336
-rw-r--r--include/configs/exynos5-dt.h2
-rw-r--r--include/configs/gw_ventana.h20
-rw-r--r--include/configs/hummingboard.h2
-rw-r--r--include/configs/k2hk_evm.h1
-rw-r--r--include/configs/koelsch.h36
-rw-r--r--include/configs/lager.h40
-rw-r--r--include/configs/m28evk.h1
-rw-r--r--include/configs/mx53ard.h2
-rw-r--r--include/configs/mx53evk.h2
-rw-r--r--include/configs/mx53loco.h2
-rw-r--r--include/configs/mx53smd.h2
-rw-r--r--include/configs/mx6sabre_common.h2
-rw-r--r--include/configs/mx6sabresd.h1
-rw-r--r--include/configs/mx6slevk.h12
-rw-r--r--include/configs/mxs.h1
-rw-r--r--include/configs/nitrogen6x.h2
-rw-r--r--include/configs/omap3_beagle.h10
-rw-r--r--include/configs/pepper.h99
-rw-r--r--include/configs/pxm2.h2
-rw-r--r--include/configs/s5p_goni.h4
-rw-r--r--include/configs/s5pc210_universal.h23
-rw-r--r--include/configs/siemens-am33x-common.h8
-rw-r--r--include/configs/smdk5250.h4
-rw-r--r--include/configs/smdk5420.h4
-rw-r--r--include/configs/smdkv310.h1
-rw-r--r--include/configs/snow.h4
-rw-r--r--include/configs/tegra-common.h7
-rw-r--r--include/configs/trats.h17
-rw-r--r--include/configs/trats2.h17
-rw-r--r--include/configs/udoo.h2
-rw-r--r--include/configs/wandboard.h38
-rw-r--r--include/palmas.h4
-rw-r--r--include/power/ltc3676_pmic.h51
-rw-r--r--include/power/pfuze100_pmic.h1
-rw-r--r--include/samsung/misc.h2
156 files changed, 7581 insertions, 6187 deletions
diff --git a/Makefile b/Makefile
index e82f616..176ce10 100644
--- a/Makefile
+++ b/Makefile
@@ -893,7 +893,7 @@ MKIMAGEFLAGS_u-boot-spl.ais = -s -n $(if $(CONFIG_AIS_CONFIG_FILE), \
spl/u-boot-spl.ais: spl/u-boot-spl.bin FORCE
$(call if_changed,mkimage)
-OBJCOPYFLAGS_u-boot.ais = -I binary -O binary --pad-to=$(CONFIG_SPL_MAX_SIZE)
+OBJCOPYFLAGS_u-boot.ais = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
u-boot.ais: spl/u-boot-spl.ais u-boot.img FORCE
$(call if_changed,pad_cat)
diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S
index 3e2358e..1cfcca9 100644
--- a/arch/arm/cpu/arm1136/start.S
+++ b/arch/arm/cpu/arm1136/start.S
@@ -15,48 +15,7 @@
#include <asm-offsets.h>
#include <config.h>
#include <version.h>
-.globl _start
-_start: b reset
-#ifdef CONFIG_SPL_BUILD
- ldr pc, _hang
- ldr pc, _hang
- ldr pc, _hang
- ldr pc, _hang
- ldr pc, _hang
- ldr pc, _hang
- ldr pc, _hang
-_hang:
- .word do_hang
- .word 0x12345678
- .word 0x12345678
- .word 0x12345678
- .word 0x12345678
- .word 0x12345678
- .word 0x12345678
- .word 0x12345678 /* now 16*4=64 */
-#else
- ldr pc, _undefined_instruction
- ldr pc, _software_interrupt
- ldr pc, _prefetch_abort
- ldr pc, _data_abort
- ldr pc, _not_used
- ldr pc, _irq
- ldr pc, _fiq
-
-_undefined_instruction: .word undefined_instruction
-_software_interrupt: .word software_interrupt
-_prefetch_abort: .word prefetch_abort
-_data_abort: .word data_abort
-_not_used: .word not_used
-_irq: .word irq
-_fiq: .word fiq
-_pad: .word 0x12345678 /* now 16*4=64 */
-#endif /* CONFIG_SPL_BUILD */
-.global _end_vect
-_end_vect:
-
- .balignl 16,0xdeadbeef
/*
*************************************************************************
*
@@ -70,26 +29,7 @@ _end_vect:
*************************************************************************
*/
-#ifdef CONFIG_USE_IRQ
-/* IRQ stack memory (calculated at run-time) */
-.globl IRQ_STACK_START
-IRQ_STACK_START:
- .word 0x0badc0de
-
-/* IRQ stack memory (calculated at run-time) */
-.globl FIQ_STACK_START
-FIQ_STACK_START:
- .word 0x0badc0de
-#endif
-
-/* IRQ stack memory (calculated at run-time) + 8 bytes */
-.globl IRQ_STACK_START_IN
-IRQ_STACK_START_IN:
- .word 0x0badc0de
-
-/*
- * the actual reset code
- */
+ .globl reset
reset:
/*
@@ -152,195 +92,3 @@ cpu_init_crit:
mov lr, ip /* restore link */
mov pc, lr /* back to my caller */
#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
-
-#ifndef CONFIG_SPL_BUILD
-/*
- *************************************************************************
- *
- * Interrupt handling
- *
- *************************************************************************
- */
-@
-@ IRQ stack frame.
-@
-#define S_FRAME_SIZE 72
-
-#define S_OLD_R0 68
-#define S_PSR 64
-#define S_PC 60
-#define S_LR 56
-#define S_SP 52
-
-#define S_IP 48
-#define S_FP 44
-#define S_R10 40
-#define S_R9 36
-#define S_R8 32
-#define S_R7 28
-#define S_R6 24
-#define S_R5 20
-#define S_R4 16
-#define S_R3 12
-#define S_R2 8
-#define S_R1 4
-#define S_R0 0
-
-#define MODE_SVC 0x13
-#define I_BIT 0x80
-
-/*
- * use bad_save_user_regs for abort/prefetch/undef/swi ...
- * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
- */
-
- .macro bad_save_user_regs
- sub sp, sp, #S_FRAME_SIZE @ carve out a frame on current user stack
- stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12
-
- ldr r2, IRQ_STACK_START_IN @ set base 2 words into abort stack
- ldmia r2, {r2 - r3} @ get values for "aborted" pc and cpsr (into parm regs)
- add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack
-
- add r5, sp, #S_SP
- mov r1, lr
- stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr
- mov r0, sp @ save current stack into r0 (param register)
- .endm
-
- .macro irq_save_user_regs
- sub sp, sp, #S_FRAME_SIZE
- stmia sp, {r0 - r12} @ Calling r0-r12
- add r8, sp, #S_PC @ !!!! R8 NEEDS to be saved !!!! a reserved stack spot would be good.
- stmdb r8, {sp, lr}^ @ Calling SP, LR
- str lr, [r8, #0] @ Save calling PC
- mrs r6, spsr
- str r6, [r8, #4] @ Save CPSR
- str r0, [r8, #8] @ Save OLD_R0
- mov r0, sp
- .endm
-
- .macro irq_restore_user_regs
- ldmia sp, {r0 - lr}^ @ Calling r0 - lr
- mov r0, r0
- ldr lr, [sp, #S_PC] @ Get PC
- add sp, sp, #S_FRAME_SIZE
- subs pc, lr, #4 @ return & move spsr_svc into cpsr
- .endm
-
- .macro get_bad_stack
- ldr r13, IRQ_STACK_START_IN @ setup our mode stack (enter in banked mode)
-
- str lr, [r13] @ save caller lr in position 0 of saved stack
- mrs lr, spsr @ get the spsr
- str lr, [r13, #4] @ save spsr in position 1 of saved stack
-
- mov r13, #MODE_SVC @ prepare SVC-Mode
- @ msr spsr_c, r13
- msr spsr, r13 @ switch modes, make sure moves will execute
- mov lr, pc @ capture return pc
- movs pc, lr @ jump to next instruction & switch modes.
- .endm
-
- .macro get_bad_stack_swi
- sub r13, r13, #4 @ space on current stack for scratch reg.
- str r0, [r13] @ save R0's value.
- ldr r0, IRQ_STACK_START_IN @ get data regions start
- str lr, [r0] @ save caller lr in position 0 of saved stack
- mrs lr, spsr @ get the spsr
- str lr, [r0, #4] @ save spsr in position 1 of saved stack
- ldr lr, [r0] @ restore lr
- ldr r0, [r13] @ restore r0
- add r13, r13, #4 @ pop stack entry
- .endm
-
- .macro get_irq_stack @ setup IRQ stack
- ldr sp, IRQ_STACK_START
- .endm
-
- .macro get_fiq_stack @ setup FIQ stack
- ldr sp, FIQ_STACK_START
- .endm
-#endif /* CONFIG_SPL_BUILD */
-
-/*
- * exception handlers
- */
-#ifdef CONFIG_SPL_BUILD
- .align 5
-do_hang:
- bl hang /* hang and never return */
-#else /* !CONFIG_SPL_BUILD */
- .align 5
-undefined_instruction:
- get_bad_stack
- bad_save_user_regs
- bl do_undefined_instruction
-
- .align 5
-software_interrupt:
- get_bad_stack_swi
- bad_save_user_regs
- bl do_software_interrupt
-
- .align 5
-prefetch_abort:
- get_bad_stack
- bad_save_user_regs
- bl do_prefetch_abort
-
- .align 5
-data_abort:
- get_bad_stack
- bad_save_user_regs
- bl do_data_abort
-
- .align 5
-not_used:
- get_bad_stack
- bad_save_user_regs
- bl do_not_used
-
-#ifdef CONFIG_USE_IRQ
-
- .align 5
-irq:
- get_irq_stack
- irq_save_user_regs
- bl do_irq
- irq_restore_user_regs
-
- .align 5
-fiq:
- get_fiq_stack
- /* someone ought to write a more effiction fiq_save_user_regs */
- irq_save_user_regs
- bl do_fiq
- irq_restore_user_regs
-
-#else
-
- .align 5
-irq:
- get_bad_stack
- bad_save_user_regs
- bl do_irq
-
- .align 5
-fiq:
- get_bad_stack
- bad_save_user_regs
- bl do_fiq
-
-#endif
- .align 5
-.global arm1136_cache_flush
-arm1136_cache_flush:
-#if !defined(CONFIG_SYS_ICACHE_OFF)
- mcr p15, 0, r1, c7, c5, 0 @ invalidate I cache
-#endif
-#if !defined(CONFIG_SYS_DCACHE_OFF)
- mcr p15, 0, r1, c7, c14, 0 @ invalidate D cache
-#endif
- mov pc, lr @ back to caller
-#endif /* CONFIG_SPL_BUILD */
diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S
index ce62011..0704bdd 100644
--- a/arch/arm/cpu/arm1176/start.S
+++ b/arch/arm/cpu/arm1176/start.S
@@ -25,48 +25,6 @@
/*
*************************************************************************
*
- * Jump vector table as in table 3.1 in [1]
- *
- *************************************************************************
- */
-
-.globl _start
-_start: b reset
-#ifndef CONFIG_SPL_BUILD
- ldr pc, _undefined_instruction
- ldr pc, _software_interrupt
- ldr pc, _prefetch_abort
- ldr pc, _data_abort
- ldr pc, _not_used
- ldr pc, _irq
- ldr pc, _fiq
-
-_undefined_instruction:
- .word undefined_instruction
-_software_interrupt:
- .word software_interrupt
-_prefetch_abort:
- .word prefetch_abort
-_data_abort:
- .word data_abort
-_not_used:
- .word not_used
-_irq:
- .word irq
-_fiq:
- .word fiq
-_pad:
- .word 0x12345678 /* now 16*4=64 */
-#else
- . = _start + 64
-#endif
-
-.global _end_vect
-_end_vect:
- .balignl 16,0xdeadbeef
-/*
- *************************************************************************
- *
* Startup Code (reset vector)
*
* do important init only if we don't start from memory!
@@ -77,14 +35,7 @@ _end_vect:
*************************************************************************
*/
-/* IRQ stack memory (calculated at run-time) + 8 bytes */
-.globl IRQ_STACK_START_IN
-IRQ_STACK_START_IN:
- .word 0x0badc0de
-
-/*
- * the actual reset code
- */
+ .globl reset
reset:
/*
@@ -182,150 +133,3 @@ skip_tcmdisable:
c_runtime_cpu_setup:
mov pc, lr
-
-#ifndef CONFIG_SPL_BUILD
-/*
- *************************************************************************
- *
- * Interrupt handling
- *
- *************************************************************************
- */
-@
-@ IRQ stack frame.
-@
-#define S_FRAME_SIZE 72
-
-#define S_OLD_R0 68
-#define S_PSR 64
-#define S_PC 60
-#define S_LR 56
-#define S_SP 52
-
-#define S_IP 48
-#define S_FP 44
-#define S_R10 40
-#define S_R9 36
-#define S_R8 32
-#define S_R7 28
-#define S_R6 24
-#define S_R5 20
-#define S_R4 16
-#define S_R3 12
-#define S_R2 8
-#define S_R1 4
-#define S_R0 0
-
-#define MODE_SVC 0x13
-#define I_BIT 0x80
-
-/*
- * use bad_save_user_regs for abort/prefetch/undef/swi ...
- */
-
- .macro bad_save_user_regs
- /* carve out a frame on current user stack */
- sub sp, sp, #S_FRAME_SIZE
- /* Save user registers (now in svc mode) r0-r12 */
- stmia sp, {r0 - r12}
-
- ldr r2, IRQ_STACK_START_IN
- /* get values for "aborted" pc and cpsr (into parm regs) */
- ldmia r2, {r2 - r3}
- /* grab pointer to old stack */
- add r0, sp, #S_FRAME_SIZE
-
- add r5, sp, #S_SP
- mov r1, lr
- /* save sp_SVC, lr_SVC, pc, cpsr */
- stmia r5, {r0 - r3}
- /* save current stack into r0 (param register) */
- mov r0, sp
- .endm
-
- .macro get_bad_stack
- ldr r13, IRQ_STACK_START_IN @ setup our mode stack
-
- /* save caller lr in position 0 of saved stack */
- str lr, [r13]
- /* get the spsr */
- mrs lr, spsr
- /* save spsr in position 1 of saved stack */
- str lr, [r13, #4]
-
- /* prepare SVC-Mode */
- mov r13, #MODE_SVC
- @ msr spsr_c, r13
- /* switch modes, make sure moves will execute */
- msr spsr, r13
- /* capture return pc */
- mov lr, pc
- /* jump to next instruction & switch modes. */
- movs pc, lr
- .endm
-
- .macro get_bad_stack_swi
- /* space on current stack for scratch reg. */
- sub r13, r13, #4
- /* save R0's value. */
- str r0, [r13]
- ldr r13, IRQ_STACK_START_IN @ setup our mode stack
- /* save caller lr in position 0 of saved stack */
- str lr, [r0]
- /* get the spsr */
- mrs lr, spsr
- /* save spsr in position 1 of saved stack */
- str lr, [r0, #4]
- /* restore lr */
- ldr lr, [r0]
- /* restore r0 */
- ldr r0, [r13]
- /* pop stack entry */
- add r13, r13, #4
- .endm
-
-/*
- * exception handlers
- */
- .align 5
-undefined_instruction:
- get_bad_stack
- bad_save_user_regs
- bl do_undefined_instruction
-
- .align 5
-software_interrupt:
- get_bad_stack_swi
- bad_save_user_regs
- bl do_software_interrupt
-
- .align 5
-prefetch_abort:
- get_bad_stack
- bad_save_user_regs
- bl do_prefetch_abort
-
- .align 5
-data_abort:
- get_bad_stack
- bad_save_user_regs
- bl do_data_abort
-
- .align 5
-not_used:
- get_bad_stack
- bad_save_user_regs
- bl do_not_used
-
- .align 5
-irq:
- get_bad_stack
- bad_save_user_regs
- bl do_irq
-
- .align 5
-fiq:
- get_bad_stack
- bad_save_user_regs
- bl do_fiq
-#endif /* CONFIG_SPL_BUILD */
diff --git a/arch/arm/cpu/arm720t/start.S b/arch/arm/cpu/arm720t/start.S
index 1a34842..01c85be 100644
--- a/arch/arm/cpu/arm720t/start.S
+++ b/arch/arm/cpu/arm720t/start.S
@@ -15,48 +15,6 @@
/*
*************************************************************************
*
- * Jump vector table as in table 3.1 in [1]
- *
- *************************************************************************
- */
-
-
-.globl _start
-_start: b reset
- ldr pc, _undefined_instruction
- ldr pc, _software_interrupt
- ldr pc, _prefetch_abort
- ldr pc, _data_abort
- ldr pc, _not_used
- ldr pc, _irq
- ldr pc, _fiq
-
-#ifdef CONFIG_SPL_BUILD
-_undefined_instruction: .word _undefined_instruction
-_software_interrupt: .word _software_interrupt
-_prefetch_abort: .word _prefetch_abort
-_data_abort: .word _data_abort
-_not_used: .word _not_used
-_irq: .word _irq
-_fiq: .word _fiq
-_pad: .word 0x12345678 /* now 16*4=64 */
-#else
-_undefined_instruction: .word undefined_instruction
-_software_interrupt: .word software_interrupt
-_prefetch_abort: .word prefetch_abort
-_data_abort: .word data_abort
-_not_used: .word not_used
-_irq: .word irq
-_fiq: .word fiq
-_pad: .word 0x12345678 /* now 16*4=64 */
-#endif /* CONFIG_SPL_BUILD */
-
- .balignl 16,0xdeadbeef
-
-
-/*
- *************************************************************************
- *
* Startup Code (reset vector)
*
* do important init only if we don't start from RAM!
@@ -67,26 +25,7 @@ _pad: .word 0x12345678 /* now 16*4=64 */
*************************************************************************
*/
-#ifdef CONFIG_USE_IRQ
-/* IRQ stack memory (calculated at run-time) */
-.globl IRQ_STACK_START
-IRQ_STACK_START:
- .word 0x0badc0de
-
-/* IRQ stack memory (calculated at run-time) */
-.globl FIQ_STACK_START
-FIQ_STACK_START:
- .word 0x0badc0de
-#endif
-
-/* IRQ stack memory (calculated at run-time) + 8 bytes */
-.globl IRQ_STACK_START_IN
-IRQ_STACK_START_IN:
- .word 0x0badc0de
-
-/*
- * the actual reset code
- */
+ .globl reset
reset:
/*
@@ -139,169 +78,3 @@ cpu_init_crit:
mov pc, lr
#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
-
-
-#ifndef CONFIG_SPL_BUILD
-/*
- *************************************************************************
- *
- * Interrupt handling
- *
- *************************************************************************
- */
-
-@
-@ IRQ stack frame.
-@
-#define S_FRAME_SIZE 72
-
-#define S_OLD_R0 68
-#define S_PSR 64
-#define S_PC 60
-#define S_LR 56
-#define S_SP 52
-
-#define S_IP 48
-#define S_FP 44
-#define S_R10 40
-#define S_R9 36
-#define S_R8 32
-#define S_R7 28
-#define S_R6 24
-#define S_R5 20
-#define S_R4 16
-#define S_R3 12
-#define S_R2 8
-#define S_R1 4
-#define S_R0 0
-
-#define MODE_SVC 0x13
-#define I_BIT 0x80
-
-/*
- * use bad_save_user_regs for abort/prefetch/undef/swi ...
- * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
- */
-
- .macro bad_save_user_regs
- sub sp, sp, #S_FRAME_SIZE
- stmia sp, {r0 - r12} @ Calling r0-r12
- add r8, sp, #S_PC
-
- ldr r2, IRQ_STACK_START_IN
- ldmia r2, {r2 - r4} @ get pc, cpsr, old_r0
- add r0, sp, #S_FRAME_SIZE @ restore sp_SVC
-
- add r5, sp, #S_SP
- mov r1, lr
- stmia r5, {r0 - r4} @ save sp_SVC, lr_SVC, pc, cpsr, old_r
- mov r0, sp
- .endm
-
- .macro irq_save_user_regs
- sub sp, sp, #S_FRAME_SIZE
- stmia sp, {r0 - r12} @ Calling r0-r12
- add r8, sp, #S_PC
- stmdb r8, {sp, lr}^ @ Calling SP, LR
- str lr, [r8, #0] @ Save calling PC
- mrs r6, spsr
- str r6, [r8, #4] @ Save CPSR
- str r0, [r8, #8] @ Save OLD_R0
- mov r0, sp
- .endm
-
- .macro irq_restore_user_regs
- ldmia sp, {r0 - lr}^ @ Calling r0 - lr
- mov r0, r0
- ldr lr, [sp, #S_PC] @ Get PC
- add sp, sp, #S_FRAME_SIZE
- subs pc, lr, #4 @ return & move spsr_svc into cpsr
- .endm
-
- .macro get_bad_stack
- ldr r13, IRQ_STACK_START_IN @ setup our mode stack
-
- str lr, [r13] @ save caller lr / spsr
- mrs lr, spsr
- str lr, [r13, #4]
-
- mov r13, #MODE_SVC @ prepare SVC-Mode
- msr spsr_c, r13
- mov lr, pc
- movs pc, lr
- .endm
-
- .macro get_irq_stack @ setup IRQ stack
- ldr sp, IRQ_STACK_START
- .endm
-
- .macro get_fiq_stack @ setup FIQ stack
- ldr sp, FIQ_STACK_START
- .endm
-
-/*
- * exception handlers
- */
- .align 5
-undefined_instruction:
- get_bad_stack
- bad_save_user_regs
- bl do_undefined_instruction
-
- .align 5
-software_interrupt:
- get_bad_stack
- bad_save_user_regs
- bl do_software_interrupt
-
- .align 5
-prefetch_abort:
- get_bad_stack
- bad_save_user_regs
- bl do_prefetch_abort
-
- .align 5
-data_abort:
- get_bad_stack
- bad_save_user_regs
- bl do_data_abort
-
- .align 5
-not_used:
- get_bad_stack
- bad_save_user_regs
- bl do_not_used
-
-#ifdef CONFIG_USE_IRQ
-
- .align 5
-irq:
- get_irq_stack
- irq_save_user_regs
- bl do_irq
- irq_restore_user_regs
-
- .align 5
-fiq:
- get_fiq_stack
- /* someone ought to write a more effiction fiq_save_user_regs */
- irq_save_user_regs
- bl do_fiq
- irq_restore_user_regs
-
-#else
-
- .align 5
-irq:
- get_bad_stack
- bad_save_user_regs
- bl do_irq
-
- .align 5
-fiq:
- get_bad_stack
- bad_save_user_regs
- bl do_fiq
-
-#endif
-#endif /* CONFIG_SPL_BUILD */
diff --git a/arch/arm/cpu/arm720t/tegra-common/cpu.c b/arch/arm/cpu/arm720t/tegra-common/cpu.c
index 168f525..c6f3b02 100644
--- a/arch/arm/cpu/arm720t/tegra-common/cpu.c
+++ b/arch/arm/cpu/arm720t/tegra-common/cpu.c
@@ -82,7 +82,7 @@ struct clk_pll_table tegra_pll_x_table[TEGRA_SOC_CNT][CLOCK_OSC_FREQ_COUNT] = {
{ .n = 600, .m = 13, .p = 0, .cpcon = 12 }, /* OSC: 26.0 MHz */
},
/*
- * T30: 1.4 GHz
+ * T30: 600 MHz
*
* Register Field Bits Width
* ------------------------------
@@ -92,10 +92,10 @@ struct clk_pll_table tegra_pll_x_table[TEGRA_SOC_CNT][CLOCK_OSC_FREQ_COUNT] = {
* PLLX_MISC cpcon 11: 8 4
*/
{
- { .n = 862, .m = 8, .p = 0, .cpcon = 8 }, /* OSC: 13.0 MHz */
- { .n = 583, .m = 8, .p = 0, .cpcon = 4 }, /* OSC: 19.2 MHz */
- { .n = 700, .m = 6, .p = 0, .cpcon = 8 }, /* OSC: 12.0 MHz */
- { .n = 700, .m = 13, .p = 0, .cpcon = 8 }, /* OSC: 26.0 MHz */
+ { .n = 600, .m = 13, .p = 0, .cpcon = 8 }, /* OSC: 13.0 MHz */
+ { .n = 500, .m = 16, .p = 0, .cpcon = 8 }, /* OSC: 19.2 MHz */
+ { .n = 600, .m = 12, .p = 0, .cpcon = 8 }, /* OSC: 12.0 MHz */
+ { .n = 600, .m = 26, .p = 0, .cpcon = 8 }, /* OSC: 26.0 MHz */
},
/*
* T114: 700 MHz
diff --git a/arch/arm/cpu/arm720t/tegra30/cpu.c b/arch/arm/cpu/arm720t/tegra30/cpu.c
index a806483..9003902 100644
--- a/arch/arm/cpu/arm720t/tegra30/cpu.c
+++ b/arch/arm/cpu/arm720t/tegra30/cpu.c
@@ -41,10 +41,18 @@ void tegra_i2c_ll_write_data(uint data, uint config)
writel(config, &reg->cnfg);
}
+#define TPS62366A_I2C_ADDR 0xC0
+#define TPS62366A_SET1_REG 0x01
+#define TPS62366A_SET1_DATA (0x4600 | TPS62366A_SET1_REG)
+
+#define TPS62361B_I2C_ADDR 0xC0
+#define TPS62361B_SET3_REG 0x03
+#define TPS62361B_SET3_DATA (0x4600 | TPS62361B_SET3_REG)
+
#define TPS65911_I2C_ADDR 0x5A
#define TPS65911_VDDCTRL_OP_REG 0x28
#define TPS65911_VDDCTRL_SR_REG 0x27
-#define TPS65911_VDDCTRL_OP_DATA (0x2300 | TPS65911_VDDCTRL_OP_REG)
+#define TPS65911_VDDCTRL_OP_DATA (0x2400 | TPS65911_VDDCTRL_OP_REG)
#define TPS65911_VDDCTRL_SR_DATA (0x0100 | TPS65911_VDDCTRL_SR_REG)
#define I2C_SEND_2_BYTES 0x0A02
@@ -58,9 +66,20 @@ static void enable_cpu_power_rail(void)
reg |= CPUPWRREQ_OE;
writel(reg, &pmc->pmc_cntrl);
+ /* Set VDD_CORE to 1.200V. */
+#ifdef CONFIG_TEGRA_VDD_CORE_TPS62366A_SET1
+ tegra_i2c_ll_write_addr(TPS62366A_I2C_ADDR, 2);
+ tegra_i2c_ll_write_data(TPS62366A_SET1_DATA, I2C_SEND_2_BYTES);
+#endif
+#ifdef CONFIG_TEGRA_VDD_CORE_TPS62361B_SET3
+ tegra_i2c_ll_write_addr(TPS62361B_I2C_ADDR, 2);
+ tegra_i2c_ll_write_data(TPS62361B_SET3_DATA, I2C_SEND_2_BYTES);
+#endif
+ udelay(1000);
+
/*
* Bring up CPU VDD via the TPS65911x PMIC on the DVC I2C bus.
- * First set VDD to 1.4V, then enable the VDD regulator.
+ * First set VDD to 1.0125V, then enable the VDD regulator.
*/
tegra_i2c_ll_write_addr(TPS65911_I2C_ADDR, 2);
tegra_i2c_ll_write_data(TPS65911_VDDCTRL_OP_DATA, I2C_SEND_2_BYTES);
diff --git a/arch/arm/cpu/arm920t/ep93xx/u-boot.lds b/arch/arm/cpu/arm920t/ep93xx/u-boot.lds
index 9699404..623a635 100644
--- a/arch/arm/cpu/arm920t/ep93xx/u-boot.lds
+++ b/arch/arm/cpu/arm920t/ep93xx/u-boot.lds
@@ -16,7 +16,8 @@ SECTIONS
.text :
{
*(.__image_copy_start)
- arch/arm/cpu/arm920t/start.o (.text*)
+ *(.vectors)
+ arch/arm/cpu/arm920t/start.o (.text*)
/* the EP93xx expects to find the pattern 'CRUS' at 0x1000 */
. = 0x1000;
LONG(0x53555243)
diff --git a/arch/arm/cpu/arm920t/start.S b/arch/arm/cpu/arm920t/start.S
index 7bf094a..0740450 100644
--- a/arch/arm/cpu/arm920t/start.S
+++ b/arch/arm/cpu/arm920t/start.S
@@ -15,36 +15,6 @@
/*
*************************************************************************
*
- * Jump vector table as in table 3.1 in [1]
- *
- *************************************************************************
- */
-
-
-.globl _start
-_start: b start_code
- ldr pc, _undefined_instruction
- ldr pc, _software_interrupt
- ldr pc, _prefetch_abort
- ldr pc, _data_abort
- ldr pc, _not_used
- ldr pc, _irq
- ldr pc, _fiq
-
-_undefined_instruction: .word undefined_instruction
-_software_interrupt: .word software_interrupt
-_prefetch_abort: .word prefetch_abort
-_data_abort: .word data_abort
-_not_used: .word not_used
-_irq: .word irq
-_fiq: .word fiq
-
- .balignl 16,0xdeadbeef
-
-
-/*
- *************************************************************************
- *
* Startup Code (called from the ARM reset exception vector)
*
* do important init only if we don't start from memory!
@@ -55,28 +25,9 @@ _fiq: .word fiq
*************************************************************************
*/
-#ifdef CONFIG_USE_IRQ
-/* IRQ stack memory (calculated at run-time) */
-.globl IRQ_STACK_START
-IRQ_STACK_START:
- .word 0x0badc0de
-
-/* IRQ stack memory (calculated at run-time) */
-.globl FIQ_STACK_START
-FIQ_STACK_START:
- .word 0x0badc0de
-#endif
-
-/* IRQ stack memory (calculated at run-time) + 8 bytes */
-.globl IRQ_STACK_START_IN
-IRQ_STACK_START_IN:
- .word 0x0badc0de
+ .globl reset
-/*
- * the actual start code
- */
-
-start_code:
+reset:
/*
* set the cpu to SVC32 mode
*/
@@ -196,166 +147,3 @@ cpu_init_crit:
mov lr, ip
mov pc, lr
#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
-
-/*
- *************************************************************************
- *
- * Interrupt handling
- *
- *************************************************************************
- */
-
-@
-@ IRQ stack frame.
-@
-#define S_FRAME_SIZE 72
-
-#define S_OLD_R0 68
-#define S_PSR 64
-#define S_PC 60
-#define S_LR 56
-#define S_SP 52
-
-#define S_IP 48
-#define S_FP 44
-#define S_R10 40
-#define S_R9 36
-#define S_R8 32
-#define S_R7 28
-#define S_R6 24
-#define S_R5 20
-#define S_R4 16
-#define S_R3 12
-#define S_R2 8
-#define S_R1 4
-#define S_R0 0
-
-#define MODE_SVC 0x13
-#define I_BIT 0x80
-
-/*
- * use bad_save_user_regs for abort/prefetch/undef/swi ...
- * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
- */
-
- .macro bad_save_user_regs
- sub sp, sp, #S_FRAME_SIZE
- stmia sp, {r0 - r12} @ Calling r0-r12
- ldr r2, IRQ_STACK_START_IN
- ldmia r2, {r2 - r3} @ get pc, cpsr
- add r0, sp, #S_FRAME_SIZE @ restore sp_SVC
-
- add r5, sp, #S_SP
- mov r1, lr
- stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr
- mov r0, sp
- .endm
-
- .macro irq_save_user_regs
- sub sp, sp, #S_FRAME_SIZE
- stmia sp, {r0 - r12} @ Calling r0-r12
- add r7, sp, #S_PC
- stmdb r7, {sp, lr}^ @ Calling SP, LR
- str lr, [r7, #0] @ Save calling PC
- mrs r6, spsr
- str r6, [r7, #4] @ Save CPSR
- str r0, [r7, #8] @ Save OLD_R0
- mov r0, sp
- .endm
-
- .macro irq_restore_user_regs
- ldmia sp, {r0 - lr}^ @ Calling r0 - lr
- mov r0, r0
- ldr lr, [sp, #S_PC] @ Get PC
- add sp, sp, #S_FRAME_SIZE
- /* return & move spsr_svc into cpsr */
- subs pc, lr, #4
- .endm
-
- .macro get_bad_stack
- ldr r13, IRQ_STACK_START_IN @ setup our mode stack
-
- str lr, [r13] @ save caller lr / spsr
- mrs lr, spsr
- str lr, [r13, #4]
-
- mov r13, #MODE_SVC @ prepare SVC-Mode
- @ msr spsr_c, r13
- msr spsr, r13
- mov lr, pc
- movs pc, lr
- .endm
-
- .macro get_irq_stack @ setup IRQ stack
- ldr sp, IRQ_STACK_START
- .endm
-
- .macro get_fiq_stack @ setup FIQ stack
- ldr sp, FIQ_STACK_START
- .endm
-
-/*
- * exception handlers
- */
- .align 5
-undefined_instruction:
- get_bad_stack
- bad_save_user_regs
- bl do_undefined_instruction
-
- .align 5
-software_interrupt:
- get_bad_stack
- bad_save_user_regs
- bl do_software_interrupt
-
- .align 5
-prefetch_abort:
- get_bad_stack
- bad_save_user_regs
- bl do_prefetch_abort
-
- .align 5
-data_abort:
- get_bad_stack
- bad_save_user_regs
- bl do_data_abort
-
- .align 5
-not_used:
- get_bad_stack
- bad_save_user_regs
- bl do_not_used
-
-#ifdef CONFIG_USE_IRQ
-
- .align 5
-irq:
- get_irq_stack
- irq_save_user_regs
- bl do_irq
- irq_restore_user_regs
-
- .align 5
-fiq:
- get_fiq_stack
- /* someone ought to write a more effiction fiq_save_user_regs */
- irq_save_user_regs
- bl do_fiq
- irq_restore_user_regs
-
-#else
-
- .align 5
-irq:
- get_bad_stack
- bad_save_user_regs
- bl do_irq
-
- .align 5
-fiq:
- get_bad_stack
- bad_save_user_regs
- bl do_fiq
-
-#endif
diff --git a/arch/arm/cpu/arm926ejs/mxs/start.S b/arch/arm/cpu/arm926ejs/mxs/start.S
index 34a0fcb..9b60436 100644
--- a/arch/arm/cpu/arm926ejs/mxs/start.S
+++ b/arch/arm/cpu/arm926ejs/mxs/start.S
@@ -27,70 +27,6 @@
/*
*************************************************************************
*
- * Jump vector table as in table 3.1 in [1]
- *
- *************************************************************************
- */
-
-
-.globl _start
-_start:
- b reset
- b undefined_instruction
- b software_interrupt
- b prefetch_abort
- b data_abort
- b not_used
- b irq
- b fiq
-
-/*
- * Vector table, located at address 0x20.
- * This table allows the code running AFTER SPL, the U-Boot, to install it's
- * interrupt handlers here. The problem is that the U-Boot is loaded into RAM,
- * including it's interrupt vectoring table and the table at 0x0 is still the
- * SPLs. So if interrupt happens in U-Boot, the SPLs interrupt vectoring table
- * is still used.
- */
-_vt_reset:
- .word _reset
-_vt_undefined_instruction:
- .word _hang
-_vt_software_interrupt:
- .word _hang
-_vt_prefetch_abort:
- .word _hang
-_vt_data_abort:
- .word _hang
-_vt_not_used:
- .word _reset
-_vt_irq:
- .word _hang
-_vt_fiq:
- .word _hang
-
-reset:
- ldr pc, _vt_reset
-undefined_instruction:
- ldr pc, _vt_undefined_instruction
-software_interrupt:
- ldr pc, _vt_software_interrupt
-prefetch_abort:
- ldr pc, _vt_prefetch_abort
-data_abort:
- ldr pc, _vt_data_abort
-not_used:
- ldr pc, _vt_not_used
-irq:
- ldr pc, _vt_irq
-fiq:
- ldr pc, _vt_fiq
-
- .balignl 16,0xdeadbeef
-
-/*
- *************************************************************************
- *
* Startup Code (reset vector)
*
* do important init only if we don't start from memory!
@@ -101,28 +37,8 @@ fiq:
*************************************************************************
*/
-#ifdef CONFIG_USE_IRQ
-/* IRQ stack memory (calculated at run-time) */
-.globl IRQ_STACK_START
-IRQ_STACK_START:
- .word 0x0badc0de
-
-/* IRQ stack memory (calculated at run-time) */
-.globl FIQ_STACK_START
-FIQ_STACK_START:
- .word 0x0badc0de
-#endif
-
-/* IRQ stack memory (calculated at run-time) + 8 bytes */
-.globl IRQ_STACK_START_IN
-IRQ_STACK_START_IN:
- .word 0x0badc0de
-
-/*
- * the actual reset code
- */
-
-_reset:
+ .globl reset
+reset:
/*
* If the CPU is configured in "Wait JTAG connection mode", the stack
* pointer is not configured and is zero. This will cause crash when
@@ -179,7 +95,3 @@ _reset:
mov r0, #0
bx lr
-
-_hang:
-1:
- bl 1b /* hang and never return */
diff --git a/arch/arm/cpu/arm926ejs/spear/start.S b/arch/arm/cpu/arm926ejs/spear/start.S
index 7dbd5db..290ac2e 100644
--- a/arch/arm/cpu/arm926ejs/spear/start.S
+++ b/arch/arm/cpu/arm926ejs/spear/start.S
@@ -17,29 +17,6 @@
#include <config.h>
-.globl _start
-_start:
- b reset
- ldr pc, _undefined_instruction
- ldr pc, _software_interrupt
- ldr pc, _prefetch_abort
- ldr pc, _data_abort
- ldr pc, _not_used
- ldr pc, _irq
- ldr pc, _fiq
-
-_undefined_instruction:
-_software_interrupt:
-_prefetch_abort:
-_data_abort:
-_not_used:
-_irq:
-_fiq:
- .word infinite_loop
-
-infinite_loop:
- b infinite_loop
-
/*
*************************************************************************
*
@@ -53,9 +30,7 @@ infinite_loop:
*************************************************************************
*/
-/*
- * the actual reset code
- */
+ .globl reset
reset:
/*
diff --git a/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds b/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
index b6d0f65..c7ee199 100644
--- a/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
+++ b/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
@@ -21,6 +21,7 @@ SECTIONS
. = ALIGN(4);
.text :
{
+ *(.vectors)
arch/arm/cpu/arm926ejs/spear/start.o (.text*)
*(.text*)
}
diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S
index 0717327..8eb2494 100644
--- a/arch/arm/cpu/arm926ejs/start.S
+++ b/arch/arm/cpu/arm926ejs/start.S
@@ -23,75 +23,6 @@
/*
*************************************************************************
*
- * Jump vector table as in table 3.1 in [1]
- *
- *************************************************************************
- */
-
-
-#ifdef CONFIG_SYS_DV_NOR_BOOT_CFG
-.globl _start
-_start:
-.globl _NOR_BOOT_CFG
-_NOR_BOOT_CFG:
- .word CONFIG_SYS_DV_NOR_BOOT_CFG
- b reset
-#else
-.globl _start
-_start:
- b reset
-#endif
-#ifdef CONFIG_SPL_BUILD
-/* No exception handlers in preloader */
- ldr pc, _hang
- ldr pc, _hang
- ldr pc, _hang
- ldr pc, _hang
- ldr pc, _hang
- ldr pc, _hang
- ldr pc, _hang
-
-_hang:
- .word do_hang
-/* pad to 64 byte boundary */
- .word 0x12345678
- .word 0x12345678
- .word 0x12345678
- .word 0x12345678
- .word 0x12345678
- .word 0x12345678
- .word 0x12345678
-#else
- ldr pc, _undefined_instruction
- ldr pc, _software_interrupt
- ldr pc, _prefetch_abort
- ldr pc, _data_abort
- ldr pc, _not_used
- ldr pc, _irq
- ldr pc, _fiq
-
-_undefined_instruction:
- .word undefined_instruction
-_software_interrupt:
- .word software_interrupt
-_prefetch_abort:
- .word prefetch_abort
-_data_abort:
- .word data_abort
-_not_used:
- .word not_used
-_irq:
- .word irq
-_fiq:
- .word fiq
-
-#endif /* CONFIG_SPL_BUILD */
- .balignl 16,0xdeadbeef
-
-
-/*
- *************************************************************************
- *
* Startup Code (reset vector)
*
* do important init only if we don't start from memory!
@@ -102,26 +33,7 @@ _fiq:
*************************************************************************
*/
-#ifdef CONFIG_USE_IRQ
-/* IRQ stack memory (calculated at run-time) */
-.globl IRQ_STACK_START
-IRQ_STACK_START:
- .word 0x0badc0de
-
-/* IRQ stack memory (calculated at run-time) */
-.globl FIQ_STACK_START
-FIQ_STACK_START:
- .word 0x0badc0de
-#endif
-
-/* IRQ stack memory (calculated at run-time) + 8 bytes */
-.globl IRQ_STACK_START_IN
-IRQ_STACK_START_IN:
- .word 0x0badc0de
-
-/*
- * the actual reset code
- */
+ .globl reset
reset:
/*
@@ -198,175 +110,3 @@ flush_dcache:
mov lr, ip /* restore link */
mov pc, lr /* back to my caller */
#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
-
-#ifndef CONFIG_SPL_BUILD
-/*
- *************************************************************************
- *
- * Interrupt handling
- *
- *************************************************************************
- */
-
-@
-@ IRQ stack frame.
-@
-#define S_FRAME_SIZE 72
-
-#define S_OLD_R0 68
-#define S_PSR 64
-#define S_PC 60
-#define S_LR 56
-#define S_SP 52
-
-#define S_IP 48
-#define S_FP 44
-#define S_R10 40
-#define S_R9 36
-#define S_R8 32
-#define S_R7 28
-#define S_R6 24
-#define S_R5 20
-#define S_R4 16
-#define S_R3 12
-#define S_R2 8
-#define S_R1 4
-#define S_R0 0
-
-#define MODE_SVC 0x13
-#define I_BIT 0x80
-
-/*
- * use bad_save_user_regs for abort/prefetch/undef/swi ...
- * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
- */
-
- .macro bad_save_user_regs
- @ carve out a frame on current user stack
- sub sp, sp, #S_FRAME_SIZE
- stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12
- ldr r2, IRQ_STACK_START_IN
- @ get values for "aborted" pc and cpsr (into parm regs)
- ldmia r2, {r2 - r3}
- add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack
- add r5, sp, #S_SP
- mov r1, lr
- stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr
- mov r0, sp @ save current stack into r0 (param register)
- .endm
-
- .macro irq_save_user_regs
- sub sp, sp, #S_FRAME_SIZE
- stmia sp, {r0 - r12} @ Calling r0-r12
- @ !!!! R8 NEEDS to be saved !!!! a reserved stack spot would be good.
- add r8, sp, #S_PC
- stmdb r8, {sp, lr}^ @ Calling SP, LR
- str lr, [r8, #0] @ Save calling PC
- mrs r6, spsr
- str r6, [r8, #4] @ Save CPSR
- str r0, [r8, #8] @ Save OLD_R0
- mov r0, sp
- .endm
-
- .macro irq_restore_user_regs
- ldmia sp, {r0 - lr}^ @ Calling r0 - lr
- mov r0, r0
- ldr lr, [sp, #S_PC] @ Get PC
- add sp, sp, #S_FRAME_SIZE
- subs pc, lr, #4 @ return & move spsr_svc into cpsr
- .endm
-
- .macro get_bad_stack
- ldr r13, IRQ_STACK_START_IN @ setup our mode stack
-
- str lr, [r13] @ save caller lr in position 0 of saved stack
- mrs lr, spsr @ get the spsr
- str lr, [r13, #4] @ save spsr in position 1 of saved stack
- mov r13, #MODE_SVC @ prepare SVC-Mode
- @ msr spsr_c, r13
- msr spsr, r13 @ switch modes, make sure moves will execute
- mov lr, pc @ capture return pc
- movs pc, lr @ jump to next instruction & switch modes.
- .endm
-
- .macro get_irq_stack @ setup IRQ stack
- ldr sp, IRQ_STACK_START
- .endm
-
- .macro get_fiq_stack @ setup FIQ stack
- ldr sp, FIQ_STACK_START
- .endm
-#endif /* CONFIG_SPL_BUILD */
-
-/*
- * exception handlers
- */
-#ifdef CONFIG_SPL_BUILD
- .align 5
-do_hang:
-1:
- bl 1b /* hang and never return */
-#else /* !CONFIG_SPL_BUILD */
- .align 5
-undefined_instruction:
- get_bad_stack
- bad_save_user_regs
- bl do_undefined_instruction
-
- .align 5
-software_interrupt:
- get_bad_stack
- bad_save_user_regs
- bl do_software_interrupt
-
- .align 5
-prefetch_abort:
- get_bad_stack
- bad_save_user_regs
- bl do_prefetch_abort
-
- .align 5
-data_abort:
- get_bad_stack
- bad_save_user_regs
- bl do_data_abort
-
- .align 5
-not_used:
- get_bad_stack
- bad_save_user_regs
- bl do_not_used
-
-#ifdef CONFIG_USE_IRQ
-
- .align 5
-irq:
- get_irq_stack
- irq_save_user_regs
- bl do_irq
- irq_restore_user_regs
-
- .align 5
-fiq:
- get_fiq_stack
- /* someone ought to write a more effiction fiq_save_user_regs */
- irq_save_user_regs
- bl do_fiq
- irq_restore_user_regs
-
-#else
-
- .align 5
-irq:
- get_bad_stack
- bad_save_user_regs
- bl do_irq
-
- .align 5
-fiq:
- get_bad_stack
- bad_save_user_regs
- bl do_fiq
-
-#endif
-#endif /* CONFIG_SPL_BUILD */
diff --git a/arch/arm/cpu/arm946es/cpu.c b/arch/arm/cpu/arm946es/cpu.c
index 0c8d92d..e20e5a8 100644
--- a/arch/arm/cpu/arm946es/cpu.c
+++ b/arch/arm/cpu/arm946es/cpu.c
@@ -16,6 +16,7 @@
#include <common.h>
#include <command.h>
#include <asm/system.h>
+#include <asm/io.h>
static void cache_flush(void);
@@ -51,3 +52,15 @@ static void cache_flush (void)
asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (i));
asm ("mcr p15, 0, %0, c7, c6, 0": :"r" (i));
}
+
+#ifndef CONFIG_INTEGRATOR
+
+__attribute__((noreturn)) void reset_cpu(ulong addr __attribute__((unused)))
+{
+ writew(0x0, 0xfffece10);
+ writew(0x8, 0xfffece10);
+ for (;;)
+ ;
+}
+
+#endif /* #ifdef CONFIG_INTEGRATOR */
diff --git a/arch/arm/cpu/arm946es/start.S b/arch/arm/cpu/arm946es/start.S
index 7d50145..4112371 100644
--- a/arch/arm/cpu/arm946es/start.S
+++ b/arch/arm/cpu/arm946es/start.S
@@ -22,45 +22,6 @@
/*
*************************************************************************
*
- * Jump vector table as in table 3.1 in [1]
- *
- *************************************************************************
- */
-
-
-.globl _start
-_start:
- b reset
- ldr pc, _undefined_instruction
- ldr pc, _software_interrupt
- ldr pc, _prefetch_abort
- ldr pc, _data_abort
- ldr pc, _not_used
- ldr pc, _irq
- ldr pc, _fiq
-
-_undefined_instruction:
- .word undefined_instruction
-_software_interrupt:
- .word software_interrupt
-_prefetch_abort:
- .word prefetch_abort
-_data_abort:
- .word data_abort
-_not_used:
- .word not_used
-_irq:
- .word irq
-_fiq:
- .word fiq
-
- .balignl 16,0xdeadbeef
-
-_vectors_end:
-
-/*
- *************************************************************************
- *
* Startup Code (reset vector)
*
* do important init only if we don't start from memory!
@@ -71,26 +32,7 @@ _vectors_end:
*************************************************************************
*/
-#ifdef CONFIG_USE_IRQ
-/* IRQ stack memory (calculated at run-time) */
-.globl IRQ_STACK_START
-IRQ_STACK_START:
- .word 0x0badc0de
-
-/* IRQ stack memory (calculated at run-time) */
-.globl FIQ_STACK_START
-FIQ_STACK_START:
- .word 0x0badc0de
-#endif
-
-/* IRQ stack memory (calculated at run-time) + 8 bytes */
-.globl IRQ_STACK_START_IN
-IRQ_STACK_START_IN:
- .word 0x0badc0de
-
-/*
- * the actual reset code
- */
+ .globl reset
reset:
/*
@@ -157,189 +99,3 @@ cpu_init_crit:
mov lr, ip /* restore link */
mov pc, lr /* back to my caller */
#endif
-/*
- *************************************************************************
- *
- * Interrupt handling
- *
- *************************************************************************
- */
-
-@
-@ IRQ stack frame.
-@
-#define S_FRAME_SIZE 72
-
-#define S_OLD_R0 68
-#define S_PSR 64
-#define S_PC 60
-#define S_LR 56
-#define S_SP 52
-
-#define S_IP 48
-#define S_FP 44
-#define S_R10 40
-#define S_R9 36
-#define S_R8 32
-#define S_R7 28
-#define S_R6 24
-#define S_R5 20
-#define S_R4 16
-#define S_R3 12
-#define S_R2 8
-#define S_R1 4
-#define S_R0 0
-
-#define MODE_SVC 0x13
-#define I_BIT 0x80
-
-/*
- * use bad_save_user_regs for abort/prefetch/undef/swi ...
- * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
- */
-
- .macro bad_save_user_regs
- @ carve out a frame on current user stack
- sub sp, sp, #S_FRAME_SIZE
- stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12
-
- ldr r2, IRQ_STACK_START_IN
- @ get values for "aborted" pc and cpsr (into parm regs)
- ldmia r2, {r2 - r3}
- add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack
- add r5, sp, #S_SP
- mov r1, lr
- stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr
- mov r0, sp @ save current stack into r0 (param register)
- .endm
-
- .macro irq_save_user_regs
- sub sp, sp, #S_FRAME_SIZE
- stmia sp, {r0 - r12} @ Calling r0-r12
- @ !!!! R8 NEEDS to be saved !!!! a reserved stack spot would be good.
- add r8, sp, #S_PC
- stmdb r8, {sp, lr}^ @ Calling SP, LR
- str lr, [r8, #0] @ Save calling PC
- mrs r6, spsr
- str r6, [r8, #4] @ Save CPSR
- str r0, [r8, #8] @ Save OLD_R0
- mov r0, sp
- .endm
-
- .macro irq_restore_user_regs
- ldmia sp, {r0 - lr}^ @ Calling r0 - lr
- mov r0, r0
- ldr lr, [sp, #S_PC] @ Get PC
- add sp, sp, #S_FRAME_SIZE
- subs pc, lr, #4 @ return & move spsr_svc into cpsr
- .endm
-
- .macro get_bad_stack
- ldr r13, IRQ_STACK_START_IN @ setup our mode stack
-
- str lr, [r13] @ save caller lr in position 0 of saved stack
- mrs lr, spsr @ get the spsr
- str lr, [r13, #4] @ save spsr in position 1 of saved stack
- mov r13, #MODE_SVC @ prepare SVC-Mode
- @ msr spsr_c, r13
- msr spsr, r13 @ switch modes, make sure moves will execute
- mov lr, pc @ capture return pc
- movs pc, lr @ jump to next instruction & switch modes.
- .endm
-
- .macro get_irq_stack @ setup IRQ stack
- ldr sp, IRQ_STACK_START
- .endm
-
- .macro get_fiq_stack @ setup FIQ stack
- ldr sp, FIQ_STACK_START
- .endm
-
-/*
- * exception handlers
- */
- .align 5
-undefined_instruction:
- get_bad_stack
- bad_save_user_regs
- bl do_undefined_instruction
-
- .align 5
-software_interrupt:
- get_bad_stack
- bad_save_user_regs
- bl do_software_interrupt
-
- .align 5
-prefetch_abort:
- get_bad_stack
- bad_save_user_regs
- bl do_prefetch_abort
-
- .align 5
-data_abort:
- get_bad_stack
- bad_save_user_regs
- bl do_data_abort
-
- .align 5
-not_used:
- get_bad_stack
- bad_save_user_regs
- bl do_not_used
-
-#ifdef CONFIG_USE_IRQ
-
- .align 5
-irq:
- get_irq_stack
- irq_save_user_regs
- bl do_irq
- irq_restore_user_regs
-
- .align 5
-fiq:
- get_fiq_stack
- /* someone ought to write a more effiction fiq_save_user_regs */
- irq_save_user_regs
- bl do_fiq
- irq_restore_user_regs
-
-#else
-
- .align 5
-irq:
- get_bad_stack
- bad_save_user_regs
- bl do_irq
-
- .align 5
-fiq:
- get_bad_stack
- bad_save_user_regs
- bl do_fiq
-
-#endif
-
-# ifdef CONFIG_INTEGRATOR
-
- /* Satisfied by general board level routine */
-
-#else
-
- .align 5
-.globl reset_cpu
-reset_cpu:
-
- ldr r1, rstctl1 /* get clkm1 reset ctl */
- mov r3, #0x0
- strh r3, [r1] /* clear it */
- mov r3, #0x8
- strh r3, [r1] /* force dsp+arm reset */
-_loop_forever:
- b _loop_forever
-
-rstctl1:
- .word 0xfffece10
-
-#endif /* #ifdef CONFIG_INTEGRATOR */
diff --git a/arch/arm/cpu/arm_intcm/start.S b/arch/arm/cpu/arm_intcm/start.S
index 7404ea7..c0c07b6 100644
--- a/arch/arm/cpu/arm_intcm/start.S
+++ b/arch/arm/cpu/arm_intcm/start.S
@@ -21,42 +21,6 @@
/*
*************************************************************************
*
- * Jump vector table
- *
- *************************************************************************
- */
-
-.globl _start
-_start:
- b reset
- ldr pc, _undefined_instruction
- ldr pc, _software_interrupt
- ldr pc, _prefetch_abort
- ldr pc, _data_abort
- ldr pc, _not_used
- ldr pc, _irq
- ldr pc, _fiq
-
-_undefined_instruction:
- .word undefined_instruction
-_software_interrupt:
- .word software_interrupt
-_prefetch_abort:
- .word prefetch_abort
-_data_abort:
- .word data_abort
-_not_used:
- .word not_used
-_irq:
- .word irq
-_fiq:
- .word fiq
-
- .balignl 16,0xdeadbeef
-
-/*
- *************************************************************************
- *
* Startup Code (reset vector)
*
* do important init only if we don't start from memory!
@@ -67,26 +31,7 @@ _fiq:
*************************************************************************
*/
-#ifdef CONFIG_USE_IRQ
-/* IRQ stack memory (calculated at run-time) */
-.globl IRQ_STACK_START
-IRQ_STACK_START:
- .word 0x0badc0de
-
-/* IRQ stack memory (calculated at run-time) */
-.globl FIQ_STACK_START
-FIQ_STACK_START:
- .word 0x0badc0de
-#endif
-
-/* IRQ stack memory (calculated at run-time) + 8 bytes */
-.globl IRQ_STACK_START_IN
-IRQ_STACK_START_IN:
- .word 0x0badc0de
-
-/*
- * the actual reset code
- */
+ .globl reset
reset:
/*
@@ -132,174 +77,3 @@ cpu_init_crit:
*/
mov pc, lr /* back to my caller */
#endif
-/*
- *************************************************************************
- *
- * Interrupt handling
- *
- *************************************************************************
- */
-
-@
-@ IRQ stack frame.
-@
-#define S_FRAME_SIZE 72
-
-#define S_OLD_R0 68
-#define S_PSR 64
-#define S_PC 60
-#define S_LR 56
-#define S_SP 52
-
-#define S_IP 48
-#define S_FP 44
-#define S_R10 40
-#define S_R9 36
-#define S_R8 32
-#define S_R7 28
-#define S_R6 24
-#define S_R5 20
-#define S_R4 16
-#define S_R3 12
-#define S_R2 8
-#define S_R1 4
-#define S_R0 0
-
-#define MODE_SVC 0x13
-#define I_BIT 0x80
-
-/*
- * use bad_save_user_regs for abort/prefetch/undef/swi ...
- * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
- */
-
- .macro bad_save_user_regs
- @ carve out a frame on current user stack
- sub sp, sp, #S_FRAME_SIZE
- stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12
-
- ldr r2, IRQ_STACK_START_IN
- @ get values for "aborted" pc and cpsr (into parm regs)
- ldmia r2, {r2 - r3}
- add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack
- add r5, sp, #S_SP
- mov r1, lr
- stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr
- mov r0, sp @ save current stack into r0 (param register)
- .endm
-
- .macro irq_save_user_regs
- sub sp, sp, #S_FRAME_SIZE
- stmia sp, {r0 - r12} @ Calling r0-r12
- @ !!!! R8 NEEDS to be saved !!!! a reserved stack spot would be good.
- add r8, sp, #S_PC
- stmdb r8, {sp, lr}^ @ Calling SP, LR
- str lr, [r8, #0] @ Save calling PC
- mrs r6, spsr
- str r6, [r8, #4] @ Save CPSR
- str r0, [r8, #8] @ Save OLD_R0
- mov r0, sp
- .endm
-
- .macro irq_restore_user_regs
- ldmia sp, {r0 - lr}^ @ Calling r0 - lr
- mov r0, r0
- ldr lr, [sp, #S_PC] @ Get PC
- add sp, sp, #S_FRAME_SIZE
- subs pc, lr, #4 @ return & move spsr_svc into cpsr
- .endm
-
- .macro get_bad_stack
- ldr r13, IRQ_STACK_START_IN @ setup our mode stack
-
- str lr, [r13] @ save caller lr in position 0 of saved stack
- mrs lr, spsr @ get the spsr
- str lr, [r13, #4] @ save spsr in position 1 of saved stack
- mov r13, #MODE_SVC @ prepare SVC-Mode
- @ msr spsr_c, r13
- msr spsr, r13 @ switch modes, make sure moves will execute
- mov lr, pc @ capture return pc
- movs pc, lr @ jump to next instruction & switch modes.
- .endm
-
- .macro get_irq_stack @ setup IRQ stack
- ldr sp, IRQ_STACK_START
- .endm
-
- .macro get_fiq_stack @ setup FIQ stack
- ldr sp, FIQ_STACK_START
- .endm
-
-/*
- * exception handlers
- */
- .align 5
-.globl undefined_instruction
-undefined_instruction:
- get_bad_stack
- bad_save_user_regs
- bl do_undefined_instruction
-
- .align 5
-.globl software_interrupt
-software_interrupt:
- get_bad_stack
- bad_save_user_regs
- bl do_software_interrupt
-
- .align 5
-.globl prefetch_abort
-prefetch_abort:
- get_bad_stack
- bad_save_user_regs
- bl do_prefetch_abort
-
- .align 5
-.globl data_abort
-data_abort:
- get_bad_stack
- bad_save_user_regs
- bl do_data_abort
-
- .align 5
-.globl not_used
-not_used:
- get_bad_stack
- bad_save_user_regs
- bl do_not_used
-
-#ifdef CONFIG_USE_IRQ
- .align 5
-.globl irq
-irq:
- get_irq_stack
- irq_save_user_regs
- bl do_irq
- irq_restore_user_regs
-
- .align 5
-.globl fiq
-fiq:
- get_fiq_stack
- /* someone ought to write a more effiction fiq_save_user_regs */
- irq_save_user_regs
- bl do_fiq
- irq_restore_user_regs
-
-#else
-
- .align 5
-.globl irq
-irq:
- get_bad_stack
- bad_save_user_regs
- bl do_irq
-
- .align 5
-.globl fiq
-fiq:
- get_bad_stack
- bad_save_user_regs
- bl do_fiq
-
-#endif
diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c
index 9edb475..ee7c2e5 100644
--- a/arch/arm/cpu/armv7/exynos/pinmux.c
+++ b/arch/arm/cpu/armv7/exynos/pinmux.c
@@ -13,30 +13,23 @@
static void exynos5_uart_config(int peripheral)
{
- struct exynos5_gpio_part1 *gpio1 =
- (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();
- struct s5p_gpio_bank *bank;
int i, start, count;
switch (peripheral) {
case PERIPH_ID_UART0:
- bank = &gpio1->a0;
- start = 0;
+ start = EXYNOS5_GPIO_A00;
count = 4;
break;
case PERIPH_ID_UART1:
- bank = &gpio1->d0;
- start = 0;
+ start = EXYNOS5_GPIO_D00;
count = 4;
break;
case PERIPH_ID_UART2:
- bank = &gpio1->a1;
- start = 0;
+ start = EXYNOS5_GPIO_A10;
count = 4;
break;
case PERIPH_ID_UART3:
- bank = &gpio1->a1;
- start = 4;
+ start = EXYNOS5_GPIO_A14;
count = 2;
break;
default:
@@ -44,37 +37,30 @@ static void exynos5_uart_config(int peripheral)
return;
}
for (i = start; i < start + count; i++) {
- s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE);
- s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
+ gpio_set_pull(i, S5P_GPIO_PULL_NONE);
+ gpio_cfg_pin(i, S5P_GPIO_FUNC(0x2));
}
}
static void exynos5420_uart_config(int peripheral)
{
- struct exynos5420_gpio_part1 *gpio1 =
- (struct exynos5420_gpio_part1 *)samsung_get_base_gpio_part1();
- struct s5p_gpio_bank *bank;
int i, start, count;
switch (peripheral) {
case PERIPH_ID_UART0:
- bank = &gpio1->a0;
- start = 0;
+ start = EXYNOS5420_GPIO_A00;
count = 4;
break;
case PERIPH_ID_UART1:
- bank = &gpio1->a0;
- start = 4;
+ start = EXYNOS5420_GPIO_A04;
count = 4;
break;
case PERIPH_ID_UART2:
- bank = &gpio1->a1;
- start = 0;
+ start = EXYNOS5420_GPIO_A10;
count = 4;
break;
case PERIPH_ID_UART3:
- bank = &gpio1->a1;
- start = 4;
+ start = EXYNOS5420_GPIO_A14;
count = 2;
break;
default:
@@ -83,64 +69,59 @@ static void exynos5420_uart_config(int peripheral)
}
for (i = start; i < start + count; i++) {
- s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE);
- s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
+ gpio_set_pull(i, S5P_GPIO_PULL_NONE);
+ gpio_cfg_pin(i, S5P_GPIO_FUNC(0x2));
}
}
static int exynos5_mmc_config(int peripheral, int flags)
{
- struct exynos5_gpio_part1 *gpio1 =
- (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();
- struct s5p_gpio_bank *bank, *bank_ext;
- int i, start = 0, gpio_func = 0;
+ int i, start, start_ext, gpio_func = 0;
switch (peripheral) {
case PERIPH_ID_SDMMC0:
- bank = &gpio1->c0;
- bank_ext = &gpio1->c1;
- start = 0;
- gpio_func = GPIO_FUNC(0x2);
+ start = EXYNOS5_GPIO_C00;
+ start_ext = EXYNOS5_GPIO_C10;
+ gpio_func = S5P_GPIO_FUNC(0x2);
break;
case PERIPH_ID_SDMMC1:
- bank = &gpio1->c2;
- bank_ext = NULL;
+ start = EXYNOS5_GPIO_C20;
+ start_ext = 0;
break;
case PERIPH_ID_SDMMC2:
- bank = &gpio1->c3;
- bank_ext = &gpio1->c4;
- start = 3;
- gpio_func = GPIO_FUNC(0x3);
+ start = EXYNOS5_GPIO_C30;
+ start_ext = EXYNOS5_GPIO_C43;
+ gpio_func = S5P_GPIO_FUNC(0x3);
break;
case PERIPH_ID_SDMMC3:
- bank = &gpio1->c4;
- bank_ext = NULL;
+ start = EXYNOS5_GPIO_C40;
+ start_ext = 0;
break;
default:
debug("%s: invalid peripheral %d", __func__, peripheral);
return -1;
}
- if ((flags & PINMUX_FLAG_8BIT_MODE) && !bank_ext) {
+ if ((flags & PINMUX_FLAG_8BIT_MODE) && !start_ext) {
debug("SDMMC device %d does not support 8bit mode",
peripheral);
return -1;
}
if (flags & PINMUX_FLAG_8BIT_MODE) {
- for (i = start; i <= (start + 3); i++) {
- s5p_gpio_cfg_pin(bank_ext, i, gpio_func);
- s5p_gpio_set_pull(bank_ext, i, GPIO_PULL_UP);
- s5p_gpio_set_drv(bank_ext, i, GPIO_DRV_4X);
+ for (i = start_ext; i <= (start_ext + 3); i++) {
+ gpio_cfg_pin(i, gpio_func);
+ gpio_set_pull(i, S5P_GPIO_PULL_UP);
+ gpio_set_drv(i, S5P_GPIO_DRV_4X);
}
}
- for (i = 0; i < 2; i++) {
- s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
- s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE);
- s5p_gpio_set_drv(bank, i, GPIO_DRV_4X);
+ for (i = start; i < (start + 2); i++) {
+ gpio_cfg_pin(i, S5P_GPIO_FUNC(0x2));
+ gpio_set_pull(i, S5P_GPIO_PULL_NONE);
+ gpio_set_drv(i, S5P_GPIO_DRV_4X);
}
- for (i = 3; i <= 6; i++) {
- s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
- s5p_gpio_set_pull(bank, i, GPIO_PULL_UP);
- s5p_gpio_set_drv(bank, i, GPIO_DRV_4X);
+ for (i = (start + 3); i <= (start + 6); i++) {
+ gpio_cfg_pin(i, S5P_GPIO_FUNC(0x2));
+ gpio_set_pull(i, S5P_GPIO_PULL_UP);
+ gpio_set_drv(i, S5P_GPIO_DRV_4X);
}
return 0;
@@ -148,26 +129,20 @@ static int exynos5_mmc_config(int peripheral, int flags)
static int exynos5420_mmc_config(int peripheral, int flags)
{
- struct exynos5420_gpio_part3 *gpio3 =
- (struct exynos5420_gpio_part3 *)samsung_get_base_gpio_part3();
- struct s5p_gpio_bank *bank = NULL, *bank_ext = NULL;
- int i, start;
+ int i, start = 0, start_ext = 0;
switch (peripheral) {
case PERIPH_ID_SDMMC0:
- bank = &gpio3->c0;
- bank_ext = &gpio3->c3;
- start = 0;
+ start = EXYNOS5420_GPIO_C00;
+ start_ext = EXYNOS5420_GPIO_C30;
break;
case PERIPH_ID_SDMMC1:
- bank = &gpio3->c1;
- bank_ext = &gpio3->d1;
- start = 4;
+ start = EXYNOS5420_GPIO_C10;
+ start_ext = EXYNOS5420_GPIO_D14;
break;
case PERIPH_ID_SDMMC2:
- bank = &gpio3->c2;
- bank_ext = NULL;
- start = 0;
+ start = EXYNOS5420_GPIO_C20;
+ start_ext = 0;
break;
default:
start = 0;
@@ -175,41 +150,41 @@ static int exynos5420_mmc_config(int peripheral, int flags)
return -1;
}
- if ((flags & PINMUX_FLAG_8BIT_MODE) && !bank_ext) {
+ if ((flags & PINMUX_FLAG_8BIT_MODE) && !start_ext) {
debug("SDMMC device %d does not support 8bit mode",
peripheral);
return -1;
}
if (flags & PINMUX_FLAG_8BIT_MODE) {
- for (i = start; i <= (start + 3); i++) {
- s5p_gpio_cfg_pin(bank_ext, i, GPIO_FUNC(0x2));
- s5p_gpio_set_pull(bank_ext, i, GPIO_PULL_UP);
- s5p_gpio_set_drv(bank_ext, i, GPIO_DRV_4X);
+ for (i = start_ext; i <= (start_ext + 3); i++) {
+ gpio_cfg_pin(i, S5P_GPIO_FUNC(0x2));
+ gpio_set_pull(i, S5P_GPIO_PULL_UP);
+ gpio_set_drv(i, S5P_GPIO_DRV_4X);
}
}
- for (i = 0; i < 3; i++) {
+ for (i = start; i < (start + 3); i++) {
/*
* MMC0 is intended to be used for eMMC. The
* card detect pin is used as a VDDEN signal to
* power on the eMMC. The 5420 iROM makes
* this same assumption.
*/
- if ((peripheral == PERIPH_ID_SDMMC0) && (i == 2)) {
- s5p_gpio_set_value(bank, i, 1);
- s5p_gpio_cfg_pin(bank, i, GPIO_OUTPUT);
+ if ((peripheral == PERIPH_ID_SDMMC0) && (i == (start + 2))) {
+ gpio_set_value(i, 1);
+ gpio_cfg_pin(i, S5P_GPIO_OUTPUT);
} else {
- s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
+ gpio_cfg_pin(i, S5P_GPIO_FUNC(0x2));
}
- s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE);
- s5p_gpio_set_drv(bank, i, GPIO_DRV_4X);
+ gpio_set_pull(i, S5P_GPIO_PULL_NONE);
+ gpio_set_drv(i, S5P_GPIO_DRV_4X);
}
- for (i = 3; i <= 6; i++) {
- s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
- s5p_gpio_set_pull(bank, i, GPIO_PULL_UP);
- s5p_gpio_set_drv(bank, i, GPIO_DRV_4X);
+ for (i = (start + 3); i <= (start + 6); i++) {
+ gpio_cfg_pin(i, S5P_GPIO_FUNC(0x2));
+ gpio_set_pull(i, S5P_GPIO_PULL_UP);
+ gpio_set_drv(i, S5P_GPIO_DRV_4X);
}
return 0;
@@ -217,8 +192,6 @@ static int exynos5420_mmc_config(int peripheral, int flags)
static void exynos5_sromc_config(int flags)
{
- struct exynos5_gpio_part1 *gpio1 =
- (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();
int i;
/*
@@ -236,13 +209,13 @@ static void exynos5_sromc_config(int flags)
* GPY1[2] SROM_WAIT(2)
* GPY1[3] EBI_DATA_RDn(2)
*/
- s5p_gpio_cfg_pin(&gpio1->y0, (flags & PINMUX_FLAG_BANK),
- GPIO_FUNC(2));
- s5p_gpio_cfg_pin(&gpio1->y0, 4, GPIO_FUNC(2));
- s5p_gpio_cfg_pin(&gpio1->y0, 5, GPIO_FUNC(2));
+ gpio_cfg_pin(EXYNOS5_GPIO_Y00 + (flags & PINMUX_FLAG_BANK),
+ S5P_GPIO_FUNC(2));
+ gpio_cfg_pin(EXYNOS5_GPIO_Y04, S5P_GPIO_FUNC(2));
+ gpio_cfg_pin(EXYNOS5_GPIO_Y05, S5P_GPIO_FUNC(2));
for (i = 0; i < 4; i++)
- s5p_gpio_cfg_pin(&gpio1->y1, i, GPIO_FUNC(2));
+ gpio_cfg_pin(EXYNOS5_GPIO_Y10 + i, S5P_GPIO_FUNC(2));
/*
* EBI: 8 Addrss Lines
@@ -277,108 +250,101 @@ static void exynos5_sromc_config(int flags)
* GPY6[7] EBI_DATA[15](2)
*/
for (i = 0; i < 8; i++) {
- s5p_gpio_cfg_pin(&gpio1->y3, i, GPIO_FUNC(2));
- s5p_gpio_set_pull(&gpio1->y3, i, GPIO_PULL_UP);
+ gpio_cfg_pin(EXYNOS5_GPIO_Y30 + i, S5P_GPIO_FUNC(2));
+ gpio_set_pull(EXYNOS5_GPIO_Y30 + i, S5P_GPIO_PULL_UP);
- s5p_gpio_cfg_pin(&gpio1->y5, i, GPIO_FUNC(2));
- s5p_gpio_set_pull(&gpio1->y5, i, GPIO_PULL_UP);
+ gpio_cfg_pin(EXYNOS5_GPIO_Y50 + i, S5P_GPIO_FUNC(2));
+ gpio_set_pull(EXYNOS5_GPIO_Y50 + i, S5P_GPIO_PULL_UP);
- s5p_gpio_cfg_pin(&gpio1->y6, i, GPIO_FUNC(2));
- s5p_gpio_set_pull(&gpio1->y6, i, GPIO_PULL_UP);
+ gpio_cfg_pin(EXYNOS5_GPIO_Y60 + i, S5P_GPIO_FUNC(2));
+ gpio_set_pull(EXYNOS5_GPIO_Y60 + i, S5P_GPIO_PULL_UP);
}
}
static void exynos5_i2c_config(int peripheral, int flags)
{
-
- struct exynos5_gpio_part1 *gpio1 =
- (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();
-
switch (peripheral) {
case PERIPH_ID_I2C0:
- s5p_gpio_cfg_pin(&gpio1->b3, 0, GPIO_FUNC(0x2));
- s5p_gpio_cfg_pin(&gpio1->b3, 1, GPIO_FUNC(0x2));
+ gpio_cfg_pin(EXYNOS5_GPIO_B30, S5P_GPIO_FUNC(0x2));
+ gpio_cfg_pin(EXYNOS5_GPIO_B31, S5P_GPIO_FUNC(0x2));
break;
case PERIPH_ID_I2C1:
- s5p_gpio_cfg_pin(&gpio1->b3, 2, GPIO_FUNC(0x2));
- s5p_gpio_cfg_pin(&gpio1->b3, 3, GPIO_FUNC(0x2));
+ gpio_cfg_pin(EXYNOS5_GPIO_B32, S5P_GPIO_FUNC(0x2));
+ gpio_cfg_pin(EXYNOS5_GPIO_B33, S5P_GPIO_FUNC(0x2));
break;
case PERIPH_ID_I2C2:
- s5p_gpio_cfg_pin(&gpio1->a0, 6, GPIO_FUNC(0x3));
- s5p_gpio_cfg_pin(&gpio1->a0, 7, GPIO_FUNC(0x3));
+ gpio_cfg_pin(EXYNOS5_GPIO_A06, S5P_GPIO_FUNC(0x3));
+ gpio_cfg_pin(EXYNOS5_GPIO_A07, S5P_GPIO_FUNC(0x3));
break;
case PERIPH_ID_I2C3:
- s5p_gpio_cfg_pin(&gpio1->a1, 2, GPIO_FUNC(0x3));
- s5p_gpio_cfg_pin(&gpio1->a1, 3, GPIO_FUNC(0x3));
+ gpio_cfg_pin(EXYNOS5_GPIO_A12, S5P_GPIO_FUNC(0x3));
+ gpio_cfg_pin(EXYNOS5_GPIO_A13, S5P_GPIO_FUNC(0x3));
break;
case PERIPH_ID_I2C4:
- s5p_gpio_cfg_pin(&gpio1->a2, 0, GPIO_FUNC(0x3));
- s5p_gpio_cfg_pin(&gpio1->a2, 1, GPIO_FUNC(0x3));
+ gpio_cfg_pin(EXYNOS5_GPIO_A20, S5P_GPIO_FUNC(0x3));
+ gpio_cfg_pin(EXYNOS5_GPIO_A21, S5P_GPIO_FUNC(0x3));
break;
case PERIPH_ID_I2C5:
- s5p_gpio_cfg_pin(&gpio1->a2, 2, GPIO_FUNC(0x3));
- s5p_gpio_cfg_pin(&gpio1->a2, 3, GPIO_FUNC(0x3));
+ gpio_cfg_pin(EXYNOS5_GPIO_A22, S5P_GPIO_FUNC(0x3));
+ gpio_cfg_pin(EXYNOS5_GPIO_A23, S5P_GPIO_FUNC(0x3));
break;
case PERIPH_ID_I2C6:
- s5p_gpio_cfg_pin(&gpio1->b1, 3, GPIO_FUNC(0x4));
- s5p_gpio_cfg_pin(&gpio1->b1, 4, GPIO_FUNC(0x4));
+ gpio_cfg_pin(EXYNOS5_GPIO_B13, S5P_GPIO_FUNC(0x4));
+ gpio_cfg_pin(EXYNOS5_GPIO_B14, S5P_GPIO_FUNC(0x4));
break;
case PERIPH_ID_I2C7:
- s5p_gpio_cfg_pin(&gpio1->b2, 2, GPIO_FUNC(0x3));
- s5p_gpio_cfg_pin(&gpio1->b2, 3, GPIO_FUNC(0x3));
+ gpio_cfg_pin(EXYNOS5_GPIO_B22, S5P_GPIO_FUNC(0x3));
+ gpio_cfg_pin(EXYNOS5_GPIO_B23, S5P_GPIO_FUNC(0x3));
break;
}
}
static void exynos5420_i2c_config(int peripheral)
{
- struct exynos5420_gpio_part1 *gpio1 =
- (struct exynos5420_gpio_part1 *)samsung_get_base_gpio_part1();
-
switch (peripheral) {
case PERIPH_ID_I2C0:
- s5p_gpio_cfg_pin(&gpio1->b3, 0, GPIO_FUNC(0x2));
- s5p_gpio_cfg_pin(&gpio1->b3, 1, GPIO_FUNC(0x2));
+ gpio_cfg_pin(EXYNOS5420_GPIO_B30, S5P_GPIO_FUNC(0x2));
+ gpio_cfg_pin(EXYNOS5420_GPIO_B31, S5P_GPIO_FUNC(0x2));
break;
case PERIPH_ID_I2C1:
- s5p_gpio_cfg_pin(&gpio1->b3, 2, GPIO_FUNC(0x2));
- s5p_gpio_cfg_pin(&gpio1->b3, 3, GPIO_FUNC(0x2));
+ gpio_cfg_pin(EXYNOS5420_GPIO_B32, S5P_GPIO_FUNC(0x2));
+ gpio_cfg_pin(EXYNOS5420_GPIO_B33, S5P_GPIO_FUNC(0x2));
break;
case PERIPH_ID_I2C2:
- s5p_gpio_cfg_pin(&gpio1->a0, 6, GPIO_FUNC(0x3));
- s5p_gpio_cfg_pin(&gpio1->a0, 7, GPIO_FUNC(0x3));
+ gpio_cfg_pin(EXYNOS5420_GPIO_A06, S5P_GPIO_FUNC(0x3));
+ gpio_cfg_pin(EXYNOS5420_GPIO_A07, S5P_GPIO_FUNC(0x3));
break;
case PERIPH_ID_I2C3:
- s5p_gpio_cfg_pin(&gpio1->a1, 2, GPIO_FUNC(0x3));
- s5p_gpio_cfg_pin(&gpio1->a1, 3, GPIO_FUNC(0x3));
+ gpio_cfg_pin(EXYNOS5420_GPIO_A12, S5P_GPIO_FUNC(0x3));
+ gpio_cfg_pin(EXYNOS5420_GPIO_A13, S5P_GPIO_FUNC(0x3));
break;
case PERIPH_ID_I2C4:
- s5p_gpio_cfg_pin(&gpio1->a2, 0, GPIO_FUNC(0x3));
- s5p_gpio_cfg_pin(&gpio1->a2, 1, GPIO_FUNC(0x3));
+ gpio_cfg_pin(EXYNOS5420_GPIO_A20, S5P_GPIO_FUNC(0x3));
+ gpio_cfg_pin(EXYNOS5420_GPIO_A21, S5P_GPIO_FUNC(0x3));
break;
case PERIPH_ID_I2C5:
- s5p_gpio_cfg_pin(&gpio1->a2, 2, GPIO_FUNC(0x3));
- s5p_gpio_cfg_pin(&gpio1->a2, 3, GPIO_FUNC(0x3));
+ gpio_cfg_pin(EXYNOS5420_GPIO_A22, S5P_GPIO_FUNC(0x3));
+ gpio_cfg_pin(EXYNOS5420_GPIO_A23, S5P_GPIO_FUNC(0x3));
break;
case PERIPH_ID_I2C6:
- s5p_gpio_cfg_pin(&gpio1->b1, 3, GPIO_FUNC(0x4));
- s5p_gpio_cfg_pin(&gpio1->b1, 4, GPIO_FUNC(0x4));
+ gpio_cfg_pin(EXYNOS5420_GPIO_B13, S5P_GPIO_FUNC(0x4));
+ gpio_cfg_pin(EXYNOS5420_GPIO_B14, S5P_GPIO_FUNC(0x4));
break;
case PERIPH_ID_I2C7:
- s5p_gpio_cfg_pin(&gpio1->b2, 2, GPIO_FUNC(0x3));
- s5p_gpio_cfg_pin(&gpio1->b2, 3, GPIO_FUNC(0x3));
+ gpio_cfg_pin(EXYNOS5420_GPIO_B22, S5P_GPIO_FUNC(0x3));
+ gpio_cfg_pin(EXYNOS5420_GPIO_B23, S5P_GPIO_FUNC(0x3));
break;
case PERIPH_ID_I2C8:
- s5p_gpio_cfg_pin(&gpio1->b3, 4, GPIO_FUNC(0x2));
- s5p_gpio_cfg_pin(&gpio1->b3, 5, GPIO_FUNC(0x2));
+ gpio_cfg_pin(EXYNOS5420_GPIO_B34, S5P_GPIO_FUNC(0x2));
+ gpio_cfg_pin(EXYNOS5420_GPIO_B35, S5P_GPIO_FUNC(0x2));
break;
case PERIPH_ID_I2C9:
- s5p_gpio_cfg_pin(&gpio1->b3, 6, GPIO_FUNC(0x2));
- s5p_gpio_cfg_pin(&gpio1->b3, 7, GPIO_FUNC(0x2));
+ gpio_cfg_pin(EXYNOS5420_GPIO_B36, S5P_GPIO_FUNC(0x2));
+ gpio_cfg_pin(EXYNOS5420_GPIO_B37, S5P_GPIO_FUNC(0x2));
break;
case PERIPH_ID_I2C10:
- s5p_gpio_cfg_pin(&gpio1->b4, 0, GPIO_FUNC(0x2));
- s5p_gpio_cfg_pin(&gpio1->b4, 1, GPIO_FUNC(0x2));
+ gpio_cfg_pin(EXYNOS5420_GPIO_B40, S5P_GPIO_FUNC(0x2));
+ gpio_cfg_pin(EXYNOS5420_GPIO_B41, S5P_GPIO_FUNC(0x2));
break;
}
}
@@ -386,19 +352,15 @@ static void exynos5420_i2c_config(int peripheral)
static void exynos5_i2s_config(int peripheral)
{
int i;
- struct exynos5_gpio_part1 *gpio1 =
- (struct exynos5_gpio_part1 *)samsung_get_base_gpio_part1();
- struct exynos5_gpio_part4 *gpio4 =
- (struct exynos5_gpio_part4 *)samsung_get_base_gpio_part4();
switch (peripheral) {
case PERIPH_ID_I2S0:
for (i = 0; i < 5; i++)
- s5p_gpio_cfg_pin(&gpio4->z, i, GPIO_FUNC(0x02));
+ gpio_cfg_pin(EXYNOS5_GPIO_Z0 + i, S5P_GPIO_FUNC(0x02));
break;
case PERIPH_ID_I2S1:
for (i = 0; i < 5; i++)
- s5p_gpio_cfg_pin(&gpio1->b0, i, GPIO_FUNC(0x02));
+ gpio_cfg_pin(EXYNOS5_GPIO_B00 + i, S5P_GPIO_FUNC(0x02));
break;
}
}
@@ -406,75 +368,57 @@ static void exynos5_i2s_config(int peripheral)
void exynos5_spi_config(int peripheral)
{
int cfg = 0, pin = 0, i;
- struct s5p_gpio_bank *bank = NULL;
- struct exynos5_gpio_part1 *gpio1 =
- (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();
- struct exynos5_gpio_part2 *gpio2 =
- (struct exynos5_gpio_part2 *) samsung_get_base_gpio_part2();
switch (peripheral) {
case PERIPH_ID_SPI0:
- bank = &gpio1->a2;
- cfg = GPIO_FUNC(0x2);
- pin = 0;
+ cfg = S5P_GPIO_FUNC(0x2);
+ pin = EXYNOS5_GPIO_A20;
break;
case PERIPH_ID_SPI1:
- bank = &gpio1->a2;
- cfg = GPIO_FUNC(0x2);
- pin = 4;
+ cfg = S5P_GPIO_FUNC(0x2);
+ pin = EXYNOS5_GPIO_A24;
break;
case PERIPH_ID_SPI2:
- bank = &gpio1->b1;
- cfg = GPIO_FUNC(0x5);
- pin = 1;
+ cfg = S5P_GPIO_FUNC(0x5);
+ pin = EXYNOS5_GPIO_B11;
break;
case PERIPH_ID_SPI3:
- bank = &gpio2->f1;
- cfg = GPIO_FUNC(0x2);
- pin = 0;
+ cfg = S5P_GPIO_FUNC(0x2);
+ pin = EXYNOS5_GPIO_F10;
break;
case PERIPH_ID_SPI4:
for (i = 0; i < 2; i++) {
- s5p_gpio_cfg_pin(&gpio2->f0, i + 2, GPIO_FUNC(0x4));
- s5p_gpio_cfg_pin(&gpio2->e0, i + 4, GPIO_FUNC(0x4));
+ gpio_cfg_pin(EXYNOS5_GPIO_F02 + i, S5P_GPIO_FUNC(0x4));
+ gpio_cfg_pin(EXYNOS5_GPIO_E04 + i, S5P_GPIO_FUNC(0x4));
}
break;
}
if (peripheral != PERIPH_ID_SPI4) {
for (i = pin; i < pin + 4; i++)
- s5p_gpio_cfg_pin(bank, i, cfg);
+ gpio_cfg_pin(i, cfg);
}
}
void exynos5420_spi_config(int peripheral)
{
int cfg, pin, i;
- struct s5p_gpio_bank *bank = NULL;
- struct exynos5420_gpio_part1 *gpio1 =
- (struct exynos5420_gpio_part1 *)samsung_get_base_gpio_part1();
- struct exynos5420_gpio_part4 *gpio4 =
- (struct exynos5420_gpio_part4 *)samsung_get_base_gpio_part4();
switch (peripheral) {
case PERIPH_ID_SPI0:
- bank = &gpio1->a2;
- cfg = GPIO_FUNC(0x2);
- pin = 0;
+ pin = EXYNOS5420_GPIO_A20;
+ cfg = S5P_GPIO_FUNC(0x2);
break;
case PERIPH_ID_SPI1:
- bank = &gpio1->a2;
- cfg = GPIO_FUNC(0x2);
- pin = 4;
+ pin = EXYNOS5420_GPIO_A24;
+ cfg = S5P_GPIO_FUNC(0x2);
break;
case PERIPH_ID_SPI2:
- bank = &gpio1->b1;
- cfg = GPIO_FUNC(0x5);
- pin = 1;
+ pin = EXYNOS5420_GPIO_B11;
+ cfg = S5P_GPIO_FUNC(0x5);
break;
case PERIPH_ID_SPI3:
- bank = &gpio4->f1;
- cfg = GPIO_FUNC(0x2);
- pin = 0;
+ pin = EXYNOS5420_GPIO_F10;
+ cfg = S5P_GPIO_FUNC(0x2);
break;
case PERIPH_ID_SPI4:
cfg = 0;
@@ -489,11 +433,13 @@ void exynos5420_spi_config(int peripheral)
if (peripheral != PERIPH_ID_SPI4) {
for (i = pin; i < pin + 4; i++)
- s5p_gpio_cfg_pin(bank, i, cfg);
+ gpio_cfg_pin(i, cfg);
} else {
for (i = 0; i < 2; i++) {
- s5p_gpio_cfg_pin(&gpio4->f0, i + 2, GPIO_FUNC(0x4));
- s5p_gpio_cfg_pin(&gpio4->e0, i + 4, GPIO_FUNC(0x4));
+ gpio_cfg_pin(EXYNOS5420_GPIO_F02 + i,
+ S5P_GPIO_FUNC(0x4));
+ gpio_cfg_pin(EXYNOS5420_GPIO_E04 + i,
+ S5P_GPIO_FUNC(0x4));
}
}
}
@@ -588,76 +534,70 @@ static int exynos5420_pinmux_config(int peripheral, int flags)
static void exynos4_i2c_config(int peripheral, int flags)
{
- struct exynos4_gpio_part1 *gpio1 =
- (struct exynos4_gpio_part1 *) samsung_get_base_gpio_part1();
-
switch (peripheral) {
case PERIPH_ID_I2C0:
- s5p_gpio_cfg_pin(&gpio1->d1, 0, GPIO_FUNC(0x2));
- s5p_gpio_cfg_pin(&gpio1->d1, 1, GPIO_FUNC(0x2));
+ gpio_cfg_pin(EXYNOS4_GPIO_D10, S5P_GPIO_FUNC(0x2));
+ gpio_cfg_pin(EXYNOS4_GPIO_D11, S5P_GPIO_FUNC(0x2));
break;
case PERIPH_ID_I2C1:
- s5p_gpio_cfg_pin(&gpio1->d1, 2, GPIO_FUNC(0x2));
- s5p_gpio_cfg_pin(&gpio1->d1, 3, GPIO_FUNC(0x2));
+ gpio_cfg_pin(EXYNOS4_GPIO_D12, S5P_GPIO_FUNC(0x2));
+ gpio_cfg_pin(EXYNOS4_GPIO_D13, S5P_GPIO_FUNC(0x2));
break;
case PERIPH_ID_I2C2:
- s5p_gpio_cfg_pin(&gpio1->a0, 6, GPIO_FUNC(0x3));
- s5p_gpio_cfg_pin(&gpio1->a0, 7, GPIO_FUNC(0x3));
+ gpio_cfg_pin(EXYNOS4_GPIO_A06, S5P_GPIO_FUNC(0x3));
+ gpio_cfg_pin(EXYNOS4_GPIO_A07, S5P_GPIO_FUNC(0x3));
break;
case PERIPH_ID_I2C3:
- s5p_gpio_cfg_pin(&gpio1->a1, 2, GPIO_FUNC(0x3));
- s5p_gpio_cfg_pin(&gpio1->a1, 3, GPIO_FUNC(0x3));
+ gpio_cfg_pin(EXYNOS4_GPIO_A12, S5P_GPIO_FUNC(0x3));
+ gpio_cfg_pin(EXYNOS4_GPIO_A13, S5P_GPIO_FUNC(0x3));
break;
case PERIPH_ID_I2C4:
- s5p_gpio_cfg_pin(&gpio1->b, 2, GPIO_FUNC(0x3));
- s5p_gpio_cfg_pin(&gpio1->b, 3, GPIO_FUNC(0x3));
+ gpio_cfg_pin(EXYNOS4_GPIO_B2, S5P_GPIO_FUNC(0x3));
+ gpio_cfg_pin(EXYNOS4_GPIO_B3, S5P_GPIO_FUNC(0x3));
break;
case PERIPH_ID_I2C5:
- s5p_gpio_cfg_pin(&gpio1->b, 6, GPIO_FUNC(0x3));
- s5p_gpio_cfg_pin(&gpio1->b, 7, GPIO_FUNC(0x3));
+ gpio_cfg_pin(EXYNOS4_GPIO_B6, S5P_GPIO_FUNC(0x3));
+ gpio_cfg_pin(EXYNOS4_GPIO_B7, S5P_GPIO_FUNC(0x3));
break;
case PERIPH_ID_I2C6:
- s5p_gpio_cfg_pin(&gpio1->c1, 3, GPIO_FUNC(0x4));
- s5p_gpio_cfg_pin(&gpio1->c1, 4, GPIO_FUNC(0x4));
+ gpio_cfg_pin(EXYNOS4_GPIO_C13, S5P_GPIO_FUNC(0x4));
+ gpio_cfg_pin(EXYNOS4_GPIO_C14, S5P_GPIO_FUNC(0x4));
break;
case PERIPH_ID_I2C7:
- s5p_gpio_cfg_pin(&gpio1->d0, 2, GPIO_FUNC(0x3));
- s5p_gpio_cfg_pin(&gpio1->d0, 3, GPIO_FUNC(0x3));
+ gpio_cfg_pin(EXYNOS4_GPIO_D02, S5P_GPIO_FUNC(0x3));
+ gpio_cfg_pin(EXYNOS4_GPIO_D03, S5P_GPIO_FUNC(0x3));
break;
}
}
static int exynos4_mmc_config(int peripheral, int flags)
{
- struct exynos4_gpio_part2 *gpio2 =
- (struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2();
- struct s5p_gpio_bank *bank, *bank_ext;
- int i;
+ int i, start = 0, start_ext = 0;
switch (peripheral) {
case PERIPH_ID_SDMMC0:
- bank = &gpio2->k0;
- bank_ext = &gpio2->k1;
+ start = EXYNOS4_GPIO_K00;
+ start_ext = EXYNOS4_GPIO_K13;
break;
case PERIPH_ID_SDMMC2:
- bank = &gpio2->k2;
- bank_ext = &gpio2->k3;
+ start = EXYNOS4_GPIO_K20;
+ start_ext = EXYNOS4_GPIO_K33;
break;
default:
return -1;
}
- for (i = 0; i < 7; i++) {
- if (i == 2)
+ for (i = start; i < (start + 7); i++) {
+ if (i == (start + 2))
continue;
- s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
- s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE);
- s5p_gpio_set_drv(bank, i, GPIO_DRV_4X);
+ gpio_cfg_pin(i, S5P_GPIO_FUNC(0x2));
+ gpio_set_pull(i, S5P_GPIO_PULL_NONE);
+ gpio_set_drv(i, S5P_GPIO_DRV_4X);
}
if (flags & PINMUX_FLAG_8BIT_MODE) {
- for (i = 3; i < 7; i++) {
- s5p_gpio_cfg_pin(bank_ext, i, GPIO_FUNC(0x3));
- s5p_gpio_set_pull(bank_ext, i, GPIO_PULL_NONE);
- s5p_gpio_set_drv(bank_ext, i, GPIO_DRV_4X);
+ for (i = start_ext; i < (start_ext + 4); i++) {
+ gpio_cfg_pin(i, S5P_GPIO_FUNC(0x3));
+ gpio_set_pull(i, S5P_GPIO_PULL_NONE);
+ gpio_set_drv(i, S5P_GPIO_DRV_4X);
}
}
@@ -666,41 +606,138 @@ static int exynos4_mmc_config(int peripheral, int flags)
static void exynos4_uart_config(int peripheral)
{
- struct exynos4_gpio_part1 *gpio1 =
- (struct exynos4_gpio_part1 *)samsung_get_base_gpio_part1();
- struct s5p_gpio_bank *bank;
int i, start, count;
switch (peripheral) {
case PERIPH_ID_UART0:
- bank = &gpio1->a0;
- start = 0;
+ start = EXYNOS4_GPIO_A00;
count = 4;
break;
case PERIPH_ID_UART1:
- bank = &gpio1->a0;
- start = 4;
+ start = EXYNOS4_GPIO_A04;
count = 4;
break;
case PERIPH_ID_UART2:
- bank = &gpio1->a1;
- start = 0;
+ start = EXYNOS4_GPIO_A10;
count = 4;
break;
case PERIPH_ID_UART3:
- bank = &gpio1->a1;
- start = 4;
+ start = EXYNOS4_GPIO_A14;
count = 2;
break;
default:
debug("%s: invalid peripheral %d", __func__, peripheral);
return;
}
- for (i = start; i < start + count; i++) {
- s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE);
- s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
+ for (i = start; i < (start + count); i++) {
+ gpio_set_pull(i, S5P_GPIO_PULL_NONE);
+ gpio_cfg_pin(i, S5P_GPIO_FUNC(0x2));
+ }
+}
+
+static void exynos4x12_i2c_config(int peripheral, int flags)
+{
+ switch (peripheral) {
+ case PERIPH_ID_I2C0:
+ gpio_cfg_pin(EXYNOS4X12_GPIO_D10, S5P_GPIO_FUNC(0x2));
+ gpio_cfg_pin(EXYNOS4X12_GPIO_D11, S5P_GPIO_FUNC(0x2));
+ break;
+ case PERIPH_ID_I2C1:
+ gpio_cfg_pin(EXYNOS4X12_GPIO_D12, S5P_GPIO_FUNC(0x2));
+ gpio_cfg_pin(EXYNOS4X12_GPIO_D13, S5P_GPIO_FUNC(0x2));
+ break;
+ case PERIPH_ID_I2C2:
+ gpio_cfg_pin(EXYNOS4X12_GPIO_A06, S5P_GPIO_FUNC(0x3));
+ gpio_cfg_pin(EXYNOS4X12_GPIO_A07, S5P_GPIO_FUNC(0x3));
+ break;
+ case PERIPH_ID_I2C3:
+ gpio_cfg_pin(EXYNOS4X12_GPIO_A12, S5P_GPIO_FUNC(0x3));
+ gpio_cfg_pin(EXYNOS4X12_GPIO_A13, S5P_GPIO_FUNC(0x3));
+ break;
+ case PERIPH_ID_I2C4:
+ gpio_cfg_pin(EXYNOS4X12_GPIO_B2, S5P_GPIO_FUNC(0x3));
+ gpio_cfg_pin(EXYNOS4X12_GPIO_B3, S5P_GPIO_FUNC(0x3));
+ break;
+ case PERIPH_ID_I2C5:
+ gpio_cfg_pin(EXYNOS4X12_GPIO_B6, S5P_GPIO_FUNC(0x3));
+ gpio_cfg_pin(EXYNOS4X12_GPIO_B7, S5P_GPIO_FUNC(0x3));
+ break;
+ case PERIPH_ID_I2C6:
+ gpio_cfg_pin(EXYNOS4X12_GPIO_C13, S5P_GPIO_FUNC(0x4));
+ gpio_cfg_pin(EXYNOS4X12_GPIO_C14, S5P_GPIO_FUNC(0x4));
+ break;
+ case PERIPH_ID_I2C7:
+ gpio_cfg_pin(EXYNOS4X12_GPIO_D02, S5P_GPIO_FUNC(0x3));
+ gpio_cfg_pin(EXYNOS4X12_GPIO_D03, S5P_GPIO_FUNC(0x3));
+ break;
+ }
+}
+
+static int exynos4x12_mmc_config(int peripheral, int flags)
+{
+ int i, start = 0, start_ext = 0;
+
+ switch (peripheral) {
+ case PERIPH_ID_SDMMC0:
+ start = EXYNOS4X12_GPIO_K00;
+ start_ext = EXYNOS4X12_GPIO_K13;
+ break;
+ case PERIPH_ID_SDMMC2:
+ start = EXYNOS4X12_GPIO_K20;
+ start_ext = EXYNOS4X12_GPIO_K33;
+ break;
+ default:
+ return -1;
}
+ for (i = start; i < (start + 7); i++) {
+ if (i == (start + 2))
+ continue;
+ gpio_cfg_pin(i, S5P_GPIO_FUNC(0x2));
+ gpio_set_pull(i, S5P_GPIO_PULL_NONE);
+ gpio_set_drv(i, S5P_GPIO_DRV_4X);
+ }
+ if (flags & PINMUX_FLAG_8BIT_MODE) {
+ for (i = start_ext; i < (start_ext + 4); i++) {
+ gpio_cfg_pin(i, S5P_GPIO_FUNC(0x3));
+ gpio_set_pull(i, S5P_GPIO_PULL_NONE);
+ gpio_set_drv(i, S5P_GPIO_DRV_4X);
+ }
+ }
+
+ return 0;
}
+
+static void exynos4x12_uart_config(int peripheral)
+{
+ int i, start, count;
+
+ switch (peripheral) {
+ case PERIPH_ID_UART0:
+ start = EXYNOS4X12_GPIO_A00;
+ count = 4;
+ break;
+ case PERIPH_ID_UART1:
+ start = EXYNOS4X12_GPIO_A04;
+ count = 4;
+ break;
+ case PERIPH_ID_UART2:
+ start = EXYNOS4X12_GPIO_A10;
+ count = 4;
+ break;
+ case PERIPH_ID_UART3:
+ start = EXYNOS4X12_GPIO_A14;
+ count = 2;
+ break;
+ default:
+ debug("%s: invalid peripheral %d", __func__, peripheral);
+ return;
+ }
+ for (i = start; i < (start + count); i++) {
+ gpio_set_pull(i, S5P_GPIO_PULL_NONE);
+ gpio_cfg_pin(i, S5P_GPIO_FUNC(0x2));
+ }
+}
+
static int exynos4_pinmux_config(int peripheral, int flags)
{
switch (peripheral) {
@@ -736,6 +773,41 @@ static int exynos4_pinmux_config(int peripheral, int flags)
return 0;
}
+static int exynos4x12_pinmux_config(int peripheral, int flags)
+{
+ switch (peripheral) {
+ case PERIPH_ID_UART0:
+ case PERIPH_ID_UART1:
+ case PERIPH_ID_UART2:
+ case PERIPH_ID_UART3:
+ exynos4x12_uart_config(peripheral);
+ break;
+ case PERIPH_ID_I2C0:
+ case PERIPH_ID_I2C1:
+ case PERIPH_ID_I2C2:
+ case PERIPH_ID_I2C3:
+ case PERIPH_ID_I2C4:
+ case PERIPH_ID_I2C5:
+ case PERIPH_ID_I2C6:
+ case PERIPH_ID_I2C7:
+ exynos4x12_i2c_config(peripheral, flags);
+ break;
+ case PERIPH_ID_SDMMC0:
+ case PERIPH_ID_SDMMC2:
+ return exynos4x12_mmc_config(peripheral, flags);
+ case PERIPH_ID_SDMMC1:
+ case PERIPH_ID_SDMMC3:
+ case PERIPH_ID_SDMMC4:
+ debug("SDMMC device %d not implemented\n", peripheral);
+ return -1;
+ default:
+ debug("%s: invalid peripheral %d", __func__, peripheral);
+ return -1;
+ }
+
+ return 0;
+}
+
int exynos_pinmux_config(int peripheral, int flags)
{
if (cpu_is_exynos5()) {
@@ -744,11 +816,14 @@ int exynos_pinmux_config(int peripheral, int flags)
else if (proid_is_exynos5250())
return exynos5_pinmux_config(peripheral, flags);
} else if (cpu_is_exynos4()) {
- return exynos4_pinmux_config(peripheral, flags);
- } else {
- debug("pinmux functionality not supported\n");
+ if (proid_is_exynos4412())
+ return exynos4x12_pinmux_config(peripheral, flags);
+ else
+ return exynos4_pinmux_config(peripheral, flags);
}
+ debug("pinmux functionality not supported\n");
+
return -1;
}
@@ -787,7 +862,7 @@ int pinmux_decode_periph_id(const void *blob, int node)
return exynos5_pinmux_decode_periph_id(blob, node);
else if (cpu_is_exynos4())
return exynos4_pinmux_decode_periph_id(blob, node);
- else
- return PERIPH_ID_NONE;
+
+ return PERIPH_ID_NONE;
}
#endif
diff --git a/arch/arm/cpu/armv7/rmobile/Makefile b/arch/arm/cpu/armv7/rmobile/Makefile
index 2221999..fad004c 100644
--- a/arch/arm/cpu/armv7/rmobile/Makefile
+++ b/arch/arm/cpu/armv7/rmobile/Makefile
@@ -11,7 +11,7 @@ obj-y += emac.o
obj-$(CONFIG_DISPLAY_BOARDINFO) += board.o
obj-$(CONFIG_GLOBAL_TIMER) += timer.o
obj-$(CONFIG_R8A7740) += lowlevel_init.o cpu_info-r8a7740.o pfc-r8a7740.o
-obj-$(CONFIG_R8A7790) += lowlevel_init_ca15.o cpu_info-r8a7790.o pfc-r8a7790.o
-obj-$(CONFIG_R8A7791) += lowlevel_init_ca15.o cpu_info-r8a7791.o pfc-r8a7791.o
+obj-$(CONFIG_R8A7790) += lowlevel_init_ca15.o cpu_info-rcar.o pfc-r8a7790.o
+obj-$(CONFIG_R8A7791) += lowlevel_init_ca15.o cpu_info-rcar.o pfc-r8a7791.o
obj-$(CONFIG_SH73A0) += lowlevel_init.o cpu_info-sh73a0.o pfc-sh73a0.o
obj-$(CONFIG_TMU_TIMER) += ../../../../sh/lib/time.o
diff --git a/arch/arm/cpu/armv7/rmobile/cpu_info-r8a7791.c b/arch/arm/cpu/armv7/rmobile/cpu_info-r8a7791.c
deleted file mode 100644
index 2de58ed..0000000
--- a/arch/arm/cpu/armv7/rmobile/cpu_info-r8a7791.c
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * arch/arm/cpu/armv7/rmobile/cpu_info-r8a7791.c
- *
- * Copyright (C) 2013 Renesas Electronics Corporation
- *
- * SPDX-License-Identifier: GPL-2.0
- */
-#include <common.h>
-#include <asm/io.h>
-
-#define PRR 0xFF000044
-
-u32 rmobile_get_cpu_type(void)
-{
- u32 product;
-
- product = readl(PRR);
-
- return (u32)((product & 0x00007F00) >> 8);
-}
-
-u32 rmobile_get_cpu_rev_integer(void)
-{
- u32 product;
-
- product = readl(PRR);
-
- return (u32)((product & 0x000000F0) >> 4);
-}
diff --git a/arch/arm/cpu/armv7/rmobile/cpu_info-r8a7790.c b/arch/arm/cpu/armv7/rmobile/cpu_info-rcar.c
index 7232e23..42ee30f 100644
--- a/arch/arm/cpu/armv7/rmobile/cpu_info-r8a7790.c
+++ b/arch/arm/cpu/armv7/rmobile/cpu_info-rcar.c
@@ -1,8 +1,7 @@
/*
- * arch/arm/cpu/armv7/rmobile/cpu_info-r8a7790.c
- * This file is r8a7790 processor support.
+ * arch/arm/cpu/armv7/rmobile/cpu_info-rcar.c
*
- * Copyright (C) 2013 Renesas Electronics Corporation
+ * Copyright (C) 2013,2014 Renesas Electronics Corporation
*
* SPDX-License-Identifier: GPL-2.0
*/
@@ -18,5 +17,10 @@ u32 rmobile_get_cpu_type(void)
u32 rmobile_get_cpu_rev_integer(void)
{
- return (readl(PRR) & 0x000000F0) >> 4;
+ return ((readl(PRR) & 0x000000F0) >> 4) + 1;
+}
+
+u32 rmobile_get_cpu_rev_fraction(void)
+{
+ return readl(PRR) & 0x0000000F;
}
diff --git a/arch/arm/cpu/armv7/rmobile/cpu_info.c b/arch/arm/cpu/armv7/rmobile/cpu_info.c
index 83d5282..7a7c97d 100644
--- a/arch/arm/cpu/armv7/rmobile/cpu_info.c
+++ b/arch/arm/cpu/armv7/rmobile/cpu_info.c
@@ -44,35 +44,30 @@ static u32 __rmobile_get_cpu_rev_fraction(void)
u32 rmobile_get_cpu_rev_fraction(void)
__attribute__((weak, alias("__rmobile_get_cpu_rev_fraction")));
+/* CPU infomation table */
+static const struct {
+ u16 cpu_type;
+ u8 cpu_name[10];
+} rmobile_cpuinfo[] = {
+ { 0x37, "SH73A0" },
+ { 0x40, "R8A7740" },
+ { 0x45, "R8A7790" },
+ { 0x47, "R8A7791" },
+ { 0x0, "CPU" },
+};
+
int print_cpuinfo(void)
{
- switch (rmobile_get_cpu_type()) {
- case 0x37:
- printf("CPU: Renesas Electronics SH73A0 rev %d.%d\n",
- rmobile_get_cpu_rev_integer(),
- rmobile_get_cpu_rev_fraction());
- break;
- case 0x40:
- printf("CPU: Renesas Electronics R8A7740 rev %d.%d\n",
- rmobile_get_cpu_rev_integer(),
- rmobile_get_cpu_rev_fraction());
- break;
-
- case 0x45:
- printf("CPU: Renesas Electronics R8A7790 rev %d\n",
- rmobile_get_cpu_rev_integer());
- break;
-
- case 0x47:
- printf("CPU: Renesas Electronics R8A7791 rev %d\n",
- rmobile_get_cpu_rev_integer());
- break;
-
- default:
- printf("CPU: Renesas Electronics CPU rev %d.%d\n",
- rmobile_get_cpu_rev_integer(),
- rmobile_get_cpu_rev_fraction());
- break;
+ int i = 0;
+ u32 cpu_type = rmobile_get_cpu_type();
+ for (; i < ARRAY_SIZE(rmobile_cpuinfo); i++) {
+ if (rmobile_cpuinfo[i].cpu_type == cpu_type) {
+ printf("CPU: Renesas Electronics %s rev %d.%d\n",
+ rmobile_cpuinfo[i].cpu_name,
+ rmobile_get_cpu_rev_integer(),
+ rmobile_get_cpu_rev_fraction());
+ break;
+ }
}
return 0;
}
diff --git a/arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S b/arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S
index e07cc80..287f8d7 100644
--- a/arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S
+++ b/arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S
@@ -2,7 +2,7 @@
* arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S
* This file is lager low level initialize.
*
- * Copyright (C) 2013 Renesas Electronics Corporation
+ * Copyright (C) 2013, 2014 Renesas Electronics Corporation
*
* SPDX-License-Identifier: GPL-2.0
*/
@@ -36,16 +36,32 @@ do_cpu_waiting:
.align 4
do_lowlevel_init:
/* surpress wfe if ca15 */
- tst r4, #4
+ tst r4, #4
mrceq p15, 0, r0, c1, c0, 1 /* actlr */
orreq r0, r0, #(1<<7)
mcreq p15, 0, r0, c1, c0, 1
+
/* and set l2 latency */
mrceq p15, 1, r0, c9, c0, 2 /* l2ctlr */
orreq r0, r0, #0x00000800
orreq r0, r0, #0x00000003
mcreq p15, 1, r0, c9, c0, 2
+ mrc p15, 0, r0, c0, c0, 5 /* r0 = MPIDR */
+ and r0, r0, #0xf00
+ lsr r0, r0, #8
+ tst r0, #1 /* only need for cluster 0 */
+ bne _exit_init_l2_a15
+
+ mrc p15, 1, r0, c9, c0, 2 /* r0 = L2CTLR */
+ and r1, r0, #7
+ cmp r1, #3 /* has already been set up */
+ bicne r0, r0, #0xe7
+ orrne r0, r0, #0x83 /* L2CTLR[7:6] + L2CTLR[2:0] */
+ orrne r0, r0, #0x20 /* L2CTLR[5] */
+ mcrne p15, 1, r0, c9, c0, 2
+
+_exit_init_l2_a15:
ldr r3, =(CONFIG_SYS_INIT_SP_ADDR)
sub sp, r3, #4
str lr, [sp]
diff --git a/arch/arm/cpu/armv7/socfpga/lowlevel_init.S b/arch/arm/cpu/armv7/socfpga/lowlevel_init.S
index 1caaa27..2f2e9fc 100644
--- a/arch/arm/cpu/armv7/socfpga/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/socfpga/lowlevel_init.S
@@ -10,20 +10,7 @@
/* Save the parameter pass in by previous boot loader */
.global save_boot_params
save_boot_params:
- /* save the parameter here */
-
- /*
- * Setup stack for exception, which is located
- * at the end of on-chip RAM. We don't expect exception prior to
- * relocation and if that happens, we won't worry -- it will overide
- * global data region as the code will goto reset. After relocation,
- * this region won't be used by other part of program.
- * Hence it is safe.
- */
- ldr r0, =(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE)
- ldr r1, =IRQ_STACK_START_IN
- str r0, [r1]
-
+ /* no parameter to save */
bx lr
diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S
index 27be451..fedd7c8 100644
--- a/arch/arm/cpu/armv7/start.S
+++ b/arch/arm/cpu/armv7/start.S
@@ -19,46 +19,6 @@
#include <asm/system.h>
#include <linux/linkage.h>
-.globl _start
-_start: b reset
- ldr pc, _undefined_instruction
- ldr pc, _software_interrupt
- ldr pc, _prefetch_abort
- ldr pc, _data_abort
- ldr pc, _not_used
- ldr pc, _irq
- ldr pc, _fiq
-#ifdef CONFIG_SPL_BUILD
-_undefined_instruction: .word _undefined_instruction
-_software_interrupt: .word _software_interrupt
-_prefetch_abort: .word _prefetch_abort
-_data_abort: .word _data_abort
-_not_used: .word _not_used
-_irq: .word _irq
-_fiq: .word _fiq
-_pad: .word 0x12345678 /* now 16*4=64 */
-#else
-.globl _undefined_instruction
-_undefined_instruction: .word undefined_instruction
-.globl _software_interrupt
-_software_interrupt: .word software_interrupt
-.globl _prefetch_abort
-_prefetch_abort: .word prefetch_abort
-.globl _data_abort
-_data_abort: .word data_abort
-.globl _not_used
-_not_used: .word not_used
-.globl _irq
-_irq: .word irq
-.globl _fiq
-_fiq: .word fiq
-_pad: .word 0x12345678 /* now 16*4=64 */
-#endif /* CONFIG_SPL_BUILD */
-
-.global _end_vect
-_end_vect:
-
- .balignl 16,0xdeadbeef
/*************************************************************************
*
* Startup Code (reset vector)
@@ -70,26 +30,7 @@ _end_vect:
*
*************************************************************************/
-#ifdef CONFIG_USE_IRQ
-/* IRQ stack memory (calculated at run-time) */
-.globl IRQ_STACK_START
-IRQ_STACK_START:
- .word 0x0badc0de
-
-/* IRQ stack memory (calculated at run-time) */
-.globl FIQ_STACK_START
-FIQ_STACK_START:
- .word 0x0badc0de
-#endif
-
-/* IRQ stack memory (calculated at run-time) + 8 bytes */
-.globl IRQ_STACK_START_IN
-IRQ_STACK_START_IN:
- .word 0x0badc0de
-
-/*
- * the actual reset code
- */
+ .globl reset
reset:
bl save_boot_params
@@ -250,195 +191,3 @@ ENTRY(cpu_init_crit)
b lowlevel_init @ go setup pll,mux,memory
ENDPROC(cpu_init_crit)
#endif
-
-#ifndef CONFIG_SPL_BUILD
-/*
- *************************************************************************
- *
- * Interrupt handling
- *
- *************************************************************************
- */
-@
-@ IRQ stack frame.
-@
-#define S_FRAME_SIZE 72
-
-#define S_OLD_R0 68
-#define S_PSR 64
-#define S_PC 60
-#define S_LR 56
-#define S_SP 52
-
-#define S_IP 48
-#define S_FP 44
-#define S_R10 40
-#define S_R9 36
-#define S_R8 32
-#define S_R7 28
-#define S_R6 24
-#define S_R5 20
-#define S_R4 16
-#define S_R3 12
-#define S_R2 8
-#define S_R1 4
-#define S_R0 0
-
-#define MODE_SVC 0x13
-#define I_BIT 0x80
-
-/*
- * use bad_save_user_regs for abort/prefetch/undef/swi ...
- * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
- */
-
- .macro bad_save_user_regs
- sub sp, sp, #S_FRAME_SIZE @ carve out a frame on current
- @ user stack
- stmia sp, {r0 - r12} @ Save user registers (now in
- @ svc mode) r0-r12
- ldr r2, IRQ_STACK_START_IN @ set base 2 words into abort
- @ stack
- ldmia r2, {r2 - r3} @ get values for "aborted" pc
- @ and cpsr (into parm regs)
- add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack
-
- add r5, sp, #S_SP
- mov r1, lr
- stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr
- mov r0, sp @ save current stack into r0
- @ (param register)
- .endm
-
- .macro irq_save_user_regs
- sub sp, sp, #S_FRAME_SIZE
- stmia sp, {r0 - r12} @ Calling r0-r12
- add r8, sp, #S_PC @ !! R8 NEEDS to be saved !!
- @ a reserved stack spot would
- @ be good.
- stmdb r8, {sp, lr}^ @ Calling SP, LR
- str lr, [r8, #0] @ Save calling PC
- mrs r6, spsr
- str r6, [r8, #4] @ Save CPSR
- str r0, [r8, #8] @ Save OLD_R0
- mov r0, sp
- .endm
-
- .macro irq_restore_user_regs
- ldmia sp, {r0 - lr}^ @ Calling r0 - lr
- mov r0, r0
- ldr lr, [sp, #S_PC] @ Get PC
- add sp, sp, #S_FRAME_SIZE
- subs pc, lr, #4 @ return & move spsr_svc into
- @ cpsr
- .endm
-
- .macro get_bad_stack
- ldr r13, IRQ_STACK_START_IN @ setup our mode stack (enter
- @ in banked mode)
-
- str lr, [r13] @ save caller lr in position 0
- @ of saved stack
- mrs lr, spsr @ get the spsr
- str lr, [r13, #4] @ save spsr in position 1 of
- @ saved stack
-
- mov r13, #MODE_SVC @ prepare SVC-Mode
- @ msr spsr_c, r13
- msr spsr, r13 @ switch modes, make sure
- @ moves will execute
- mov lr, pc @ capture return pc
- movs pc, lr @ jump to next instruction &
- @ switch modes.
- .endm
-
- .macro get_bad_stack_swi
- sub r13, r13, #4 @ space on current stack for
- @ scratch reg.
- str r0, [r13] @ save R0's value.
- ldr r0, IRQ_STACK_START_IN @ get data regions start
- @ spots for abort stack
- str lr, [r0] @ save caller lr in position 0
- @ of saved stack
- mrs lr, spsr @ get the spsr
- str lr, [r0, #4] @ save spsr in position 1 of
- @ saved stack
- ldr lr, [r0] @ restore lr
- ldr r0, [r13] @ restore r0
- add r13, r13, #4 @ pop stack entry
- .endm
-
- .macro get_irq_stack @ setup IRQ stack
- ldr sp, IRQ_STACK_START
- .endm
-
- .macro get_fiq_stack @ setup FIQ stack
- ldr sp, FIQ_STACK_START
- .endm
-
-/*
- * exception handlers
- */
- .align 5
-undefined_instruction:
- get_bad_stack
- bad_save_user_regs
- bl do_undefined_instruction
-
- .align 5
-software_interrupt:
- get_bad_stack_swi
- bad_save_user_regs
- bl do_software_interrupt
-
- .align 5
-prefetch_abort:
- get_bad_stack
- bad_save_user_regs
- bl do_prefetch_abort
-
- .align 5
-data_abort:
- get_bad_stack
- bad_save_user_regs
- bl do_data_abort
-
- .align 5
-not_used:
- get_bad_stack
- bad_save_user_regs
- bl do_not_used
-
-#ifdef CONFIG_USE_IRQ
-
- .align 5
-irq:
- get_irq_stack
- irq_save_user_regs
- bl do_irq
- irq_restore_user_regs
-
- .align 5
-fiq:
- get_fiq_stack
- /* someone ought to write a more effective fiq_save_user_regs */
- irq_save_user_regs
- bl do_fiq
- irq_restore_user_regs
-
-#else
-
- .align 5
-irq:
- get_bad_stack
- bad_save_user_regs
- bl do_irq
-
- .align 5
-fiq:
- get_bad_stack
- bad_save_user_regs
- bl do_fiq
-
-#endif /* CONFIG_USE_IRQ */
-#endif /* CONFIG_SPL_BUILD */
diff --git a/arch/arm/cpu/armv7/zynq/u-boot.lds b/arch/arm/cpu/armv7/zynq/u-boot.lds
index f2a5965..69500a6 100644
--- a/arch/arm/cpu/armv7/zynq/u-boot.lds
+++ b/arch/arm/cpu/armv7/zynq/u-boot.lds
@@ -88,7 +88,7 @@ SECTIONS
}
/*
- * Zynq needs to discard more sections because the user
+ * Zynq needs to discard these sections because the user
* is expected to pass this image on to tools for boot.bin
* generation that require them to be dropped.
*/
diff --git a/arch/arm/cpu/pxa/cpuinfo.c b/arch/arm/cpu/pxa/cpuinfo.c
index 9d16079..17d8be5 100644
--- a/arch/arm/cpu/pxa/cpuinfo.c
+++ b/arch/arm/cpu/pxa/cpuinfo.c
@@ -11,6 +11,12 @@
#include <errno.h>
#include <linux/compiler.h>
+#ifdef CONFIG_CPU_PXA25X
+#if ((CONFIG_SYS_INIT_SP_ADDR) != 0xfffff800)
+#error "Init SP address must be set to 0xfffff800 for PXA250"
+#endif
+#endif
+
#define CPU_MASK_PXA_PRODID 0x000003f0
#define CPU_MASK_PXA_REVID 0x0000000f
diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S
index ae0d13c..c77d51e 100644
--- a/arch/arm/cpu/pxa/start.S
+++ b/arch/arm/cpu/pxa/start.S
@@ -23,54 +23,6 @@
#include <config.h>
#include <version.h>
-#ifdef CONFIG_CPU_PXA25X
-#if ((CONFIG_SYS_INIT_SP_ADDR) != 0xfffff800)
-#error "Init SP address must be set to 0xfffff800 for PXA250"
-#endif
-#endif
-
-.globl _start
-_start: b reset
-#ifdef CONFIG_SPL_BUILD
- ldr pc, _hang
- ldr pc, _hang
- ldr pc, _hang
- ldr pc, _hang
- ldr pc, _hang
- ldr pc, _hang
- ldr pc, _hang
-
-_hang:
- .word do_hang
- .word 0x12345678
- .word 0x12345678
- .word 0x12345678
- .word 0x12345678
- .word 0x12345678
- .word 0x12345678
- .word 0x12345678 /* now 16*4=64 */
-#else
- ldr pc, _undefined_instruction
- ldr pc, _software_interrupt
- ldr pc, _prefetch_abort
- ldr pc, _data_abort
- ldr pc, _not_used
- ldr pc, _irq
- ldr pc, _fiq
-
-_undefined_instruction: .word undefined_instruction
-_software_interrupt: .word software_interrupt
-_prefetch_abort: .word prefetch_abort
-_data_abort: .word data_abort
-_not_used: .word not_used
-_irq: .word irq
-_fiq: .word fiq
-_pad: .word 0x12345678 /* now 16*4=64 */
-#endif /* CONFIG_SPL_BUILD */
-.global _end_vect
-_end_vect:
-
- .balignl 16,0xdeadbeef
/*
*************************************************************************
*
@@ -84,26 +36,7 @@ _end_vect:
*************************************************************************
*/
-#ifdef CONFIG_USE_IRQ
-/* IRQ stack memory (calculated at run-time) */
-.globl IRQ_STACK_START
-IRQ_STACK_START:
- .word 0x0badc0de
-
-/* IRQ stack memory (calculated at run-time) */
-.globl FIQ_STACK_START
-FIQ_STACK_START:
- .word 0x0badc0de
-#endif
-
-/* IRQ stack memory (calculated at run-time) + 8 bytes */
-.globl IRQ_STACK_START_IN
-IRQ_STACK_START_IN:
- .word 0x0badc0de
-
-/*
- * the actual reset code
- */
+ .globl reset
reset:
/*
@@ -174,190 +107,6 @@ cpu_init_crit:
mov pc, lr /* back to my caller */
#endif /* !CONFIG_SKIP_LOWLEVEL_INIT || CONFIG_CPU_PXA25X */
-#ifndef CONFIG_SPL_BUILD
-/*
- *************************************************************************
- *
- * Interrupt handling
- *
- *************************************************************************
- */
-@
-@ IRQ stack frame.
-@
-#define S_FRAME_SIZE 72
-
-#define S_OLD_R0 68
-#define S_PSR 64
-#define S_PC 60
-#define S_LR 56
-#define S_SP 52
-
-#define S_IP 48
-#define S_FP 44
-#define S_R10 40
-#define S_R9 36
-#define S_R8 32
-#define S_R7 28
-#define S_R6 24
-#define S_R5 20
-#define S_R4 16
-#define S_R3 12
-#define S_R2 8
-#define S_R1 4
-#define S_R0 0
-
-#define MODE_SVC 0x13
-#define I_BIT 0x80
-
-/*
- * use bad_save_user_regs for abort/prefetch/undef/swi ...
- * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
- */
-
- .macro bad_save_user_regs
- sub sp, sp, #S_FRAME_SIZE @ carve out a frame on current user stack
- stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12
-
- ldr r2, IRQ_STACK_START_IN @ set base 2 words into abort stack
- ldmia r2, {r2 - r3} @ get values for "aborted" pc and cpsr (into parm regs)
- add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack
-
- add r5, sp, #S_SP
- mov r1, lr
- stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr
- mov r0, sp @ save current stack into r0 (param register)
- .endm
-
- .macro irq_save_user_regs
- sub sp, sp, #S_FRAME_SIZE
- stmia sp, {r0 - r12} @ Calling r0-r12
- add r8, sp, #S_PC @ !!!! R8 NEEDS to be saved !!!! a reserved stack spot would be good.
- stmdb r8, {sp, lr}^ @ Calling SP, LR
- str lr, [r8, #0] @ Save calling PC
- mrs r6, spsr
- str r6, [r8, #4] @ Save CPSR
- str r0, [r8, #8] @ Save OLD_R0
- mov r0, sp
- .endm
-
- .macro irq_restore_user_regs
- ldmia sp, {r0 - lr}^ @ Calling r0 - lr
- mov r0, r0
- ldr lr, [sp, #S_PC] @ Get PC
- add sp, sp, #S_FRAME_SIZE
- subs pc, lr, #4 @ return & move spsr_svc into cpsr
- .endm
-
- .macro get_bad_stack
- ldr r13, IRQ_STACK_START_IN @ setup our mode stack (enter in banked mode)
-
- str lr, [r13] @ save caller lr in position 0 of saved stack
- mrs lr, spsr @ get the spsr
- str lr, [r13, #4] @ save spsr in position 1 of saved stack
-
- mov r13, #MODE_SVC @ prepare SVC-Mode
- @ msr spsr_c, r13
- msr spsr, r13 @ switch modes, make sure moves will execute
- mov lr, pc @ capture return pc
- movs pc, lr @ jump to next instruction & switch modes.
- .endm
-
- .macro get_bad_stack_swi
- sub r13, r13, #4 @ space on current stack for scratch reg.
- str r0, [r13] @ save R0's value.
- ldr r0, IRQ_STACK_START_IN @ get data regions start
- str lr, [r0] @ save caller lr in position 0 of saved stack
- mrs lr, spsr @ get the spsr
- str lr, [r0, #4] @ save spsr in position 1 of saved stack
- ldr lr, [r0] @ restore lr
- ldr r0, [r13] @ restore r0
- add r13, r13, #4 @ pop stack entry
- .endm
-
- .macro get_irq_stack @ setup IRQ stack
- ldr sp, IRQ_STACK_START
- .endm
-
- .macro get_fiq_stack @ setup FIQ stack
- ldr sp, FIQ_STACK_START
- .endm
-#endif /* CONFIG_SPL_BUILD */
-
-/*
- * exception handlers
- */
-#ifdef CONFIG_SPL_BUILD
- .align 5
-do_hang:
- bl hang /* hang and never return */
-#else /* !CONFIG_SPL_BUILD */
- .align 5
-undefined_instruction:
- get_bad_stack
- bad_save_user_regs
- bl do_undefined_instruction
-
- .align 5
-software_interrupt:
- get_bad_stack_swi
- bad_save_user_regs
- bl do_software_interrupt
-
- .align 5
-prefetch_abort:
- get_bad_stack
- bad_save_user_regs
- bl do_prefetch_abort
-
- .align 5
-data_abort:
- get_bad_stack
- bad_save_user_regs
- bl do_data_abort
-
- .align 5
-not_used:
- get_bad_stack
- bad_save_user_regs
- bl do_not_used
-
-#ifdef CONFIG_USE_IRQ
-
- .align 5
-irq:
- get_irq_stack
- irq_save_user_regs
- bl do_irq
- irq_restore_user_regs
-
- .align 5
-fiq:
- get_fiq_stack
- /* someone ought to write a more effiction fiq_save_user_regs */
- irq_save_user_regs
- bl do_fiq
- irq_restore_user_regs
-
-#else
-
- .align 5
-irq:
- get_bad_stack
- bad_save_user_regs
- bl do_irq
-
- .align 5
-fiq:
- get_bad_stack
- bad_save_user_regs
- bl do_fiq
-
-#endif
- .align 5
-#endif /* CONFIG_SPL_BUILD */
-
-
/*
* Enable MMU to use DCache as DRAM.
*
diff --git a/arch/arm/cpu/sa1100/cpu.c b/arch/arm/cpu/sa1100/cpu.c
index 6651898..4c9752a 100644
--- a/arch/arm/cpu/sa1100/cpu.c
+++ b/arch/arm/cpu/sa1100/cpu.c
@@ -17,6 +17,7 @@
#include <common.h>
#include <command.h>
#include <asm/system.h>
+#include <asm/io.h>
#ifdef CONFIG_USE_IRQ
DECLARE_GLOBAL_DATA_PTR;
@@ -52,3 +53,16 @@ static void cache_flush (void)
asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (i));
}
+
+#define RST_BASE 0x90030000
+#define RSRR 0x00
+#define RCSR 0x04
+
+__attribute__((noreturn)) void reset_cpu(ulong addr __attribute__((unused)))
+{
+ /* repeat endlessly */
+ while (1) {
+ writel(0, RST_BASE + RCSR);
+ writel(1, RST_BASE + RSRR);
+ }
+}
diff --git a/arch/arm/cpu/sa1100/start.S b/arch/arm/cpu/sa1100/start.S
index bf80937..78e0cb8 100644
--- a/arch/arm/cpu/sa1100/start.S
+++ b/arch/arm/cpu/sa1100/start.S
@@ -16,36 +16,6 @@
/*
*************************************************************************
*
- * Jump vector table as in table 3.1 in [1]
- *
- *************************************************************************
- */
-
-
-.globl _start
-_start: b reset
- ldr pc, _undefined_instruction
- ldr pc, _software_interrupt
- ldr pc, _prefetch_abort
- ldr pc, _data_abort
- ldr pc, _not_used
- ldr pc, _irq
- ldr pc, _fiq
-
-_undefined_instruction: .word undefined_instruction
-_software_interrupt: .word software_interrupt
-_prefetch_abort: .word prefetch_abort
-_data_abort: .word data_abort
-_not_used: .word not_used
-_irq: .word irq
-_fiq: .word fiq
-
- .balignl 16,0xdeadbeef
-
-
-/*
- *************************************************************************
- *
* Startup Code (reset vector)
*
* do important init only if we don't start from memory!
@@ -56,26 +26,7 @@ _fiq: .word fiq
*************************************************************************
*/
-#ifdef CONFIG_USE_IRQ
-/* IRQ stack memory (calculated at run-time) */
-.globl IRQ_STACK_START
-IRQ_STACK_START:
- .word 0x0badc0de
-
-/* IRQ stack memory (calculated at run-time) */
-.globl FIQ_STACK_START
-FIQ_STACK_START:
- .word 0x0badc0de
-#endif
-
-/* IRQ stack memory (calculated at run-time) + 8 bytes */
-.globl IRQ_STACK_START_IN
-IRQ_STACK_START_IN:
- .word 0x0badc0de
-
-/*
- * the actual reset code
- */
+ .globl reset
reset:
/*
@@ -173,177 +124,3 @@ cpu_init_crit:
mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */
mov pc, lr
-
-
-/*
- *************************************************************************
- *
- * Interrupt handling
- *
- *************************************************************************
- */
-
-@
-@ IRQ stack frame.
-@
-#define S_FRAME_SIZE 72
-
-#define S_OLD_R0 68
-#define S_PSR 64
-#define S_PC 60
-#define S_LR 56
-#define S_SP 52
-
-#define S_IP 48
-#define S_FP 44
-#define S_R10 40
-#define S_R9 36
-#define S_R8 32
-#define S_R7 28
-#define S_R6 24
-#define S_R5 20
-#define S_R4 16
-#define S_R3 12
-#define S_R2 8
-#define S_R1 4
-#define S_R0 0
-
-#define MODE_SVC 0x13
-#define I_BIT 0x80
-
-/*
- * use bad_save_user_regs for abort/prefetch/undef/swi ...
- * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
- */
-
- .macro bad_save_user_regs
- sub sp, sp, #S_FRAME_SIZE
- stmia sp, {r0 - r12} @ Calling r0-r12
- add r8, sp, #S_PC
-
- ldr r2, IRQ_STACK_START_IN
- ldmia r2, {r2 - r4} @ get pc, cpsr, old_r0
- add r0, sp, #S_FRAME_SIZE @ restore sp_SVC
-
- add r5, sp, #S_SP
- mov r1, lr
- stmia r5, {r0 - r4} @ save sp_SVC, lr_SVC, pc, cpsr, old_r
- mov r0, sp
- .endm
-
- .macro irq_save_user_regs
- sub sp, sp, #S_FRAME_SIZE
- stmia sp, {r0 - r12} @ Calling r0-r12
- add r8, sp, #S_PC
- stmdb r8, {sp, lr}^ @ Calling SP, LR
- str lr, [r8, #0] @ Save calling PC
- mrs r6, spsr
- str r6, [r8, #4] @ Save CPSR
- str r0, [r8, #8] @ Save OLD_R0
- mov r0, sp
- .endm
-
- .macro irq_restore_user_regs
- ldmia sp, {r0 - lr}^ @ Calling r0 - lr
- mov r0, r0
- ldr lr, [sp, #S_PC] @ Get PC
- add sp, sp, #S_FRAME_SIZE
- subs pc, lr, #4 @ return & move spsr_svc into cpsr
- .endm
-
- .macro get_bad_stack
- ldr r13, IRQ_STACK_START_IN @ setup our mode stack
-
- str lr, [r13] @ save caller lr / spsr
- mrs lr, spsr
- str lr, [r13, #4]
-
- mov r13, #MODE_SVC @ prepare SVC-Mode
- msr spsr_c, r13
- mov lr, pc
- movs pc, lr
- .endm
-
- .macro get_irq_stack @ setup IRQ stack
- ldr sp, IRQ_STACK_START
- .endm
-
- .macro get_fiq_stack @ setup FIQ stack
- ldr sp, FIQ_STACK_START
- .endm
-
-/*
- * exception handlers
- */
- .align 5
-undefined_instruction:
- get_bad_stack
- bad_save_user_regs
- bl do_undefined_instruction
-
- .align 5
-software_interrupt:
- get_bad_stack
- bad_save_user_regs
- bl do_software_interrupt
-
- .align 5
-prefetch_abort:
- get_bad_stack
- bad_save_user_regs
- bl do_prefetch_abort
-
- .align 5
-data_abort:
- get_bad_stack
- bad_save_user_regs
- bl do_data_abort
-
- .align 5
-not_used:
- get_bad_stack
- bad_save_user_regs
- bl do_not_used
-
-#ifdef CONFIG_USE_IRQ
-
- .align 5
-irq:
- get_irq_stack
- irq_save_user_regs
- bl do_irq
- irq_restore_user_regs
-
- .align 5
-fiq:
- get_fiq_stack
- /* someone ought to write a more effiction fiq_save_user_regs */
- irq_save_user_regs
- bl do_fiq
- irq_restore_user_regs
-
-#else
-
- .align 5
-irq:
- get_bad_stack
- bad_save_user_regs
- bl do_irq
-
- .align 5
-fiq:
- get_bad_stack
- bad_save_user_regs
- bl do_fiq
-
-#endif
-
- .align 5
-.globl reset_cpu
-reset_cpu:
- ldr r0, RST_BASE
- mov r1, #0x0 @ set bit 3-0 ...
- str r1, [r0, #RCSR] @ ... to clear in RCSR
- mov r1, #0x1
- str r1, [r0, #RSRR] @ and perform reset
- b reset_cpu @ silly, but repeat endlessly
diff --git a/arch/arm/cpu/tegra-common/pinmux-common.c b/arch/arm/cpu/tegra-common/pinmux-common.c
index d62618c..6e3ab0c 100644
--- a/arch/arm/cpu/tegra-common/pinmux-common.c
+++ b/arch/arm/cpu/tegra-common/pinmux-common.c
@@ -86,12 +86,31 @@
#define IO_RESET_SHIFT 8
#define RCV_SEL_SHIFT 9
+#if !defined(CONFIG_TEGRA20) && !defined(CONFIG_TEGRA30)
+/* This register/field only exists on Tegra114 and later */
+#define APB_MISC_PP_PINMUX_GLOBAL_0 0x40
+#define CLAMP_INPUTS_WHEN_TRISTATED 1
+
+void pinmux_set_tristate_input_clamping(void)
+{
+ u32 *reg = _R(APB_MISC_PP_PINMUX_GLOBAL_0);
+ u32 val;
+
+ val = readl(reg);
+ val |= CLAMP_INPUTS_WHEN_TRISTATED;
+ writel(val, reg);
+}
+#endif
+
void pinmux_set_func(enum pmux_pingrp pin, enum pmux_func func)
{
u32 *reg = MUX_REG(pin);
int i, mux = -1;
u32 val;
+ if (func == PMUX_FUNC_DEFAULT)
+ return;
+
/* Error check on pin and func */
assert(pmux_pingrp_isvalid(pin));
assert(pmux_func_isvalid(func));
diff --git a/arch/arm/cpu/u-boot-spl.lds b/arch/arm/cpu/u-boot-spl.lds
index 3e88668..4beddf0 100644
--- a/arch/arm/cpu/u-boot-spl.lds
+++ b/arch/arm/cpu/u-boot-spl.lds
@@ -18,6 +18,7 @@ SECTIONS
.text :
{
__image_copy_start = .;
+ *(.vectors)
CPUDIR/start.o (.text*)
*(.text*)
}
diff --git a/arch/arm/cpu/u-boot.lds b/arch/arm/cpu/u-boot.lds
index 33c1f99..a7728e0 100644
--- a/arch/arm/cpu/u-boot.lds
+++ b/arch/arm/cpu/u-boot.lds
@@ -18,6 +18,7 @@ SECTIONS
.text :
{
*(.__image_copy_start)
+ *(.vectors)
CPUDIR/start.o (.text*)
*(.text*)
}
diff --git a/arch/arm/dts/exynos4210-origen.dts b/arch/arm/dts/exynos4210-origen.dts
index 5c9d2ae..15059d2 100644
--- a/arch/arm/dts/exynos4210-origen.dts
+++ b/arch/arm/dts/exynos4210-origen.dts
@@ -36,10 +36,10 @@
sdhci@12530000 {
samsung,bus-width = <4>;
samsung,timing = <1 2 3>;
- cd-gpios = <&gpio 0x2008002 0>;
+ cd-gpios = <&gpio 0xA2 0>;
};
sdhci@12540000 {
status = "disabled";
};
-}; \ No newline at end of file
+};
diff --git a/arch/arm/dts/exynos4210-trats.dts b/arch/arm/dts/exynos4210-trats.dts
index 992e023..0ff6939 100644
--- a/arch/arm/dts/exynos4210-trats.dts
+++ b/arch/arm/dts/exynos4210-trats.dts
@@ -101,7 +101,7 @@
sdhci@12510000 {
samsung,bus-width = <8>;
samsung,timing = <1 3 3>;
- pwr-gpios = <&gpio 0x2008002 0>;
+ pwr-gpios = <&gpio 0xA2 0>;
};
sdhci@12520000 {
@@ -111,10 +111,10 @@
sdhci@12530000 {
samsung,bus-width = <4>;
samsung,timing = <1 2 3>;
- cd-gpios = <&gpio 0x20c6004 0>;
+ cd-gpios = <&gpio 0x39C 0>;
};
sdhci@12540000 {
status = "disabled";
};
-}; \ No newline at end of file
+};
diff --git a/arch/arm/dts/exynos4210-universal_c210.dts b/arch/arm/dts/exynos4210-universal_c210.dts
index 1cdd981..6941906 100644
--- a/arch/arm/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/dts/exynos4210-universal_c210.dts
@@ -24,7 +24,7 @@
sdhci@12510000 {
samsung,bus-width = <8>;
samsung,timing = <1 3 3>;
- pwr-gpios = <&gpio 0x2008002 0>;
+ pwr-gpios = <&gpio 0xA2 0>;
};
sdhci@12520000 {
@@ -34,7 +34,7 @@
sdhci@12530000 {
samsung,bus-width = <4>;
samsung,timing = <1 2 3>;
- cd-gpios = <&gpio 0x20c6004 0>;
+ cd-gpios = <&gpio 0x39C 0>;
};
sdhci@12540000 {
diff --git a/arch/arm/dts/exynos4412-trats2.dts b/arch/arm/dts/exynos4412-trats2.dts
index 7d32067..1596f83 100644
--- a/arch/arm/dts/exynos4412-trats2.dts
+++ b/arch/arm/dts/exynos4412-trats2.dts
@@ -415,7 +415,7 @@
sdhci@12510000 {
samsung,bus-width = <8>;
samsung,timing = <1 3 3>;
- pwr-gpios = <&gpio 0x2004002 0>;
+ pwr-gpios = <&gpio 0xB2 0>;
};
sdhci@12520000 {
@@ -425,7 +425,7 @@
sdhci@12530000 {
samsung,bus-width = <4>;
samsung,timing = <1 2 3>;
- cd-gpios = <&gpio 0x20C6004 0>;
+ cd-gpios = <&gpio 0x3BC 0>;
};
sdhci@12540000 {
diff --git a/arch/arm/dts/imx6q-sabreauto.dts b/arch/arm/dts/imx6q-sabreauto.dts
index a3c9c91..7af2a88 100644
--- a/arch/arm/dts/imx6q-sabreauto.dts
+++ b/arch/arm/dts/imx6q-sabreauto.dts
@@ -1,9 +1,9 @@
/*
- + * Copyright 2012 Freescale Semiconductor, Inc.
- + * Copyright 2011 Linaro Ltd.
- + *
- + * SPDX-License-Identifier: GPL-2.0+
- + */
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
/dts-v1/;
diff --git a/arch/arm/imx-common/Makefile b/arch/arm/imx-common/Makefile
index b04dfbb..0e71395 100644
--- a/arch/arm/imx-common/Makefile
+++ b/arch/arm/imx-common/Makefile
@@ -19,6 +19,7 @@ obj-y += misc.o
endif
ifeq ($(SOC),$(filter $(SOC),mx6))
obj-$(CONFIG_CMD_SATA) += sata.o
+obj-$(CONFIG_IMX_VIDEO_SKIP) += video.o
endif
obj-$(CONFIG_CMD_BMODE) += cmd_bmode.o
obj-$(CONFIG_CMD_HDMIDETECT) += cmd_hdmidet.o
diff --git a/arch/arm/imx-common/iomux-v3.c b/arch/arm/imx-common/iomux-v3.c
index b59b802..6e46ea8 100644
--- a/arch/arm/imx-common/iomux-v3.c
+++ b/arch/arm/imx-common/iomux-v3.c
@@ -30,6 +30,14 @@ void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad)
(pad & MUX_PAD_CTRL_OFS_MASK) >> MUX_PAD_CTRL_OFS_SHIFT;
u32 pad_ctrl = (pad & MUX_PAD_CTRL_MASK) >> MUX_PAD_CTRL_SHIFT;
+#if defined CONFIG_MX6SL
+ /* Check whether LVE bit needs to be set */
+ if (pad_ctrl & PAD_CTL_LVE) {
+ pad_ctrl &= ~PAD_CTL_LVE;
+ pad_ctrl |= PAD_CTL_LVE_BIT;
+ }
+#endif
+
if (mux_ctrl_ofs)
__raw_writel(mux_mode, base + mux_ctrl_ofs);
diff --git a/arch/arm/imx-common/video.c b/arch/arm/imx-common/video.c
new file mode 100644
index 0000000..0121cd7
--- /dev/null
+++ b/arch/arm/imx-common/video.c
@@ -0,0 +1,65 @@
+/*
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/errno.h>
+#include <asm/imx-common/video.h>
+
+extern struct display_info_t const displays[];
+extern size_t display_count;
+
+int board_video_skip(void)
+{
+ int i;
+ int ret;
+ char const *panel = getenv("panel");
+ if (!panel) {
+ for (i = 0; i < display_count; i++) {
+ struct display_info_t const *dev = displays+i;
+ if (dev->detect && dev->detect(dev)) {
+ panel = dev->mode.name;
+ printf("auto-detected panel %s\n", panel);
+ break;
+ }
+ }
+ if (!panel) {
+ panel = displays[0].mode.name;
+ printf("No panel detected: default to %s\n", panel);
+ i = 0;
+ }
+ } else {
+ for (i = 0; i < display_count; i++) {
+ if (!strcmp(panel, displays[i].mode.name))
+ break;
+ }
+ }
+ if (i < display_count) {
+ ret = ipuv3_fb_init(&displays[i].mode, 0,
+ displays[i].pixfmt);
+ if (!ret) {
+ displays[i].enable(displays+i);
+ printf("Display: %s (%ux%u)\n",
+ displays[i].mode.name,
+ displays[i].mode.xres,
+ displays[i].mode.yres);
+ } else
+ printf("LCD %s cannot be configured: %d\n",
+ displays[i].mode.name, ret);
+ } else {
+ printf("unsupported panel %s\n", panel);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_IMX_HDMI
+#include <asm/arch/mxc_hdmi.h>
+#include <asm/io.h>
+int detect_hdmi(struct display_info_t const *dev)
+{
+ struct hdmi_regs *hdmi = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR;
+ return readb(&hdmi->phy_stat0) & HDMI_DVI_STAT;
+}
+#endif
diff --git a/arch/arm/include/asm/arch-am33xx/clock.h b/arch/arm/include/asm/arch-am33xx/clock.h
index 7637457..f00fad3 100644
--- a/arch/arm/include/asm/arch-am33xx/clock.h
+++ b/arch/arm/include/asm/arch-am33xx/clock.h
@@ -42,6 +42,8 @@
#define MODULE_CLKCTRL_IDLEST_DISABLED 3
/* CM_CLKMODE_DPLL */
+#define CM_CLKMODE_DPLL_SSC_EN_SHIFT 12
+#define CM_CLKMODE_DPLL_SSC_EN_MASK (1 << 12)
#define CM_CLKMODE_DPLL_REGM4XEN_SHIFT 11
#define CM_CLKMODE_DPLL_REGM4XEN_MASK (1 << 11)
#define CM_CLKMODE_DPLL_LPMODE_EN_SHIFT 10
diff --git a/arch/arm/include/asm/arch-exynos/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h
index fdf73b5..ba71714 100644
--- a/arch/arm/include/asm/arch-exynos/cpu.h
+++ b/arch/arm/include/asm/arch-exynos/cpu.h
@@ -98,7 +98,7 @@
#define EXYNOS5_I2C_SPACING 0x10000
#define EXYNOS5_AUDIOSS_BASE 0x03810000
-#define EXYNOS5_GPIO_PART4_BASE 0x03860000
+#define EXYNOS5_GPIO_PART8_BASE 0x03860000
#define EXYNOS5_PRO_ID 0x10000000
#define EXYNOS5_CLOCK_BASE 0x10010000
#define EXYNOS5_POWER_BASE 0x10040000
@@ -108,9 +108,13 @@
#define EXYNOS5_WATCHDOG_BASE 0x101D0000
#define EXYNOS5_ACE_SFR_BASE 0x10830000
#define EXYNOS5_DMC_PHY_BASE 0x10C00000
-#define EXYNOS5_GPIO_PART3_BASE 0x10D10000
+#define EXYNOS5_GPIO_PART5_BASE 0x10D10000
+#define EXYNOS5_GPIO_PART6_BASE 0x10D10060
+#define EXYNOS5_GPIO_PART7_BASE 0x10D100C0
#define EXYNOS5_DMC_CTRL_BASE 0x10DD0000
#define EXYNOS5_GPIO_PART1_BASE 0x11400000
+#define EXYNOS5_GPIO_PART2_BASE 0x114002E0
+#define EXYNOS5_GPIO_PART3_BASE 0x11400C00
#define EXYNOS5_MIPI_DSIM_BASE 0x11D00000
#define EXYNOS5_USB_HOST_XHCI_BASE 0x12000000
#define EXYNOS5_USB3PHY_BASE 0x12100000
@@ -125,7 +129,7 @@
#define EXYNOS5_I2S_BASE 0x12D60000
#define EXYNOS5_PWMTIMER_BASE 0x12DD0000
#define EXYNOS5_SPI_ISP_BASE 0x131A0000
-#define EXYNOS5_GPIO_PART2_BASE 0x13400000
+#define EXYNOS5_GPIO_PART4_BASE 0x13400000
#define EXYNOS5_FIMD_BASE 0x14400000
#define EXYNOS5_DP_BASE 0x145B0000
@@ -135,7 +139,7 @@
/* EXYNOS5420 */
#define EXYNOS5420_AUDIOSS_BASE 0x03810000
-#define EXYNOS5420_GPIO_PART5_BASE 0x03860000
+#define EXYNOS5420_GPIO_PART6_BASE 0x03860000
#define EXYNOS5420_PRO_ID 0x10000000
#define EXYNOS5420_CLOCK_BASE 0x10010000
#define EXYNOS5420_POWER_BASE 0x10040000
@@ -158,8 +162,9 @@
#define EXYNOS5420_PWMTIMER_BASE 0x12DD0000
#define EXYNOS5420_SPI_ISP_BASE 0x131A0000
#define EXYNOS5420_GPIO_PART2_BASE 0x13400000
-#define EXYNOS5420_GPIO_PART3_BASE 0x13410000
-#define EXYNOS5420_GPIO_PART4_BASE 0x14000000
+#define EXYNOS5420_GPIO_PART3_BASE 0x13400C00
+#define EXYNOS5420_GPIO_PART4_BASE 0x13410000
+#define EXYNOS5420_GPIO_PART5_BASE 0x14000000
#define EXYNOS5420_GPIO_PART1_BASE 0x14010000
#define EXYNOS5420_MIPI_DSIM_BASE 0x14500000
#define EXYNOS5420_DP_BASE 0x145B0000
diff --git a/arch/arm/include/asm/arch-exynos/gpio.h b/arch/arm/include/asm/arch-exynos/gpio.h
index d6868fa..be5113f 100644
--- a/arch/arm/include/asm/arch-exynos/gpio.h
+++ b/arch/arm/include/asm/arch-exynos/gpio.h
@@ -19,328 +19,1515 @@ struct s5p_gpio_bank {
unsigned char res1[8];
};
-struct exynos4_gpio_part1 {
- struct s5p_gpio_bank a0;
- struct s5p_gpio_bank a1;
- struct s5p_gpio_bank b;
- struct s5p_gpio_bank c0;
- struct s5p_gpio_bank c1;
- struct s5p_gpio_bank d0;
- struct s5p_gpio_bank d1;
- struct s5p_gpio_bank e0;
- struct s5p_gpio_bank e1;
- struct s5p_gpio_bank e2;
- struct s5p_gpio_bank e3;
- struct s5p_gpio_bank e4;
- struct s5p_gpio_bank f0;
- struct s5p_gpio_bank f1;
- struct s5p_gpio_bank f2;
- struct s5p_gpio_bank f3;
-};
+/* GPIO pins per bank */
+#define GPIO_PER_BANK 8
-struct exynos4_gpio_part2 {
- struct s5p_gpio_bank j0;
- struct s5p_gpio_bank j1;
- struct s5p_gpio_bank k0;
- struct s5p_gpio_bank k1;
- struct s5p_gpio_bank k2;
- struct s5p_gpio_bank k3;
- struct s5p_gpio_bank l0;
- struct s5p_gpio_bank l1;
- struct s5p_gpio_bank l2;
- struct s5p_gpio_bank y0;
- struct s5p_gpio_bank y1;
- struct s5p_gpio_bank y2;
- struct s5p_gpio_bank y3;
- struct s5p_gpio_bank y4;
- struct s5p_gpio_bank y5;
- struct s5p_gpio_bank y6;
- struct s5p_gpio_bank res1[80];
- struct s5p_gpio_bank x0;
- struct s5p_gpio_bank x1;
- struct s5p_gpio_bank x2;
- struct s5p_gpio_bank x3;
-};
+/* A list of valid GPIO numbers for the asm-generic/gpio.h interface */
+enum exynos4_gpio_pin {
+ /* GPIO_PART1_STARTS */
+ EXYNOS4_GPIO_A00, /* 0 */
+ EXYNOS4_GPIO_A01,
+ EXYNOS4_GPIO_A02,
+ EXYNOS4_GPIO_A03,
+ EXYNOS4_GPIO_A04,
+ EXYNOS4_GPIO_A05,
+ EXYNOS4_GPIO_A06,
+ EXYNOS4_GPIO_A07,
+ EXYNOS4_GPIO_A10, /* 8 */
+ EXYNOS4_GPIO_A11,
+ EXYNOS4_GPIO_A12,
+ EXYNOS4_GPIO_A13,
+ EXYNOS4_GPIO_A14,
+ EXYNOS4_GPIO_A15,
+ EXYNOS4_GPIO_A16,
+ EXYNOS4_GPIO_A17,
+ EXYNOS4_GPIO_B0, /* 16 0x10 */
+ EXYNOS4_GPIO_B1,
+ EXYNOS4_GPIO_B2,
+ EXYNOS4_GPIO_B3,
+ EXYNOS4_GPIO_B4,
+ EXYNOS4_GPIO_B5,
+ EXYNOS4_GPIO_B6,
+ EXYNOS4_GPIO_B7,
+ EXYNOS4_GPIO_C00, /* 24 0x18 */
+ EXYNOS4_GPIO_C01,
+ EXYNOS4_GPIO_C02,
+ EXYNOS4_GPIO_C03,
+ EXYNOS4_GPIO_C04,
+ EXYNOS4_GPIO_C05,
+ EXYNOS4_GPIO_C06,
+ EXYNOS4_GPIO_C07,
+ EXYNOS4_GPIO_C10, /* 32 0x20*/
+ EXYNOS4_GPIO_C11,
+ EXYNOS4_GPIO_C12,
+ EXYNOS4_GPIO_C13,
+ EXYNOS4_GPIO_C14,
+ EXYNOS4_GPIO_C15,
+ EXYNOS4_GPIO_C16,
+ EXYNOS4_GPIO_C17,
+ EXYNOS4_GPIO_D00, /* 40 0x28 */
+ EXYNOS4_GPIO_D01,
+ EXYNOS4_GPIO_D02,
+ EXYNOS4_GPIO_D03,
+ EXYNOS4_GPIO_D04,
+ EXYNOS4_GPIO_D05,
+ EXYNOS4_GPIO_D06,
+ EXYNOS4_GPIO_D07,
+ EXYNOS4_GPIO_D10, /* 48 0x30 */
+ EXYNOS4_GPIO_D11,
+ EXYNOS4_GPIO_D12,
+ EXYNOS4_GPIO_D13,
+ EXYNOS4_GPIO_D14,
+ EXYNOS4_GPIO_D15,
+ EXYNOS4_GPIO_D16,
+ EXYNOS4_GPIO_D17,
+ EXYNOS4_GPIO_E00, /* 56 0x38 */
+ EXYNOS4_GPIO_E01,
+ EXYNOS4_GPIO_E02,
+ EXYNOS4_GPIO_E03,
+ EXYNOS4_GPIO_E04,
+ EXYNOS4_GPIO_E05,
+ EXYNOS4_GPIO_E06,
+ EXYNOS4_GPIO_E07,
+ EXYNOS4_GPIO_E10, /* 64 0x40 */
+ EXYNOS4_GPIO_E11,
+ EXYNOS4_GPIO_E12,
+ EXYNOS4_GPIO_E13,
+ EXYNOS4_GPIO_E14,
+ EXYNOS4_GPIO_E15,
+ EXYNOS4_GPIO_E16,
+ EXYNOS4_GPIO_E17,
+ EXYNOS4_GPIO_E20, /* 72 0x48 */
+ EXYNOS4_GPIO_E21,
+ EXYNOS4_GPIO_E22,
+ EXYNOS4_GPIO_E23,
+ EXYNOS4_GPIO_E24,
+ EXYNOS4_GPIO_E25,
+ EXYNOS4_GPIO_E26,
+ EXYNOS4_GPIO_E27,
+ EXYNOS4_GPIO_E30, /* 80 0x50 */
+ EXYNOS4_GPIO_E31,
+ EXYNOS4_GPIO_E32,
+ EXYNOS4_GPIO_E33,
+ EXYNOS4_GPIO_E34,
+ EXYNOS4_GPIO_E35,
+ EXYNOS4_GPIO_E36,
+ EXYNOS4_GPIO_E37,
+ EXYNOS4_GPIO_E40, /* 88 0x58 */
+ EXYNOS4_GPIO_E41,
+ EXYNOS4_GPIO_E42,
+ EXYNOS4_GPIO_E43,
+ EXYNOS4_GPIO_E44,
+ EXYNOS4_GPIO_E45,
+ EXYNOS4_GPIO_E46,
+ EXYNOS4_GPIO_E47,
+ EXYNOS4_GPIO_F00, /* 96 0x60 */
+ EXYNOS4_GPIO_F01,
+ EXYNOS4_GPIO_F02,
+ EXYNOS4_GPIO_F03,
+ EXYNOS4_GPIO_F04,
+ EXYNOS4_GPIO_F05,
+ EXYNOS4_GPIO_F06,
+ EXYNOS4_GPIO_F07,
+ EXYNOS4_GPIO_F10, /* 104 0x68 */
+ EXYNOS4_GPIO_F11,
+ EXYNOS4_GPIO_F12,
+ EXYNOS4_GPIO_F13,
+ EXYNOS4_GPIO_F14,
+ EXYNOS4_GPIO_F15,
+ EXYNOS4_GPIO_F16,
+ EXYNOS4_GPIO_F17,
+ EXYNOS4_GPIO_F20, /* 112 0x70 */
+ EXYNOS4_GPIO_F21,
+ EXYNOS4_GPIO_F22,
+ EXYNOS4_GPIO_F23,
+ EXYNOS4_GPIO_F24,
+ EXYNOS4_GPIO_F25,
+ EXYNOS4_GPIO_F26,
+ EXYNOS4_GPIO_F27,
+ EXYNOS4_GPIO_F30, /* 120 0x78 */
+ EXYNOS4_GPIO_F31,
+ EXYNOS4_GPIO_F32,
+ EXYNOS4_GPIO_F33,
+ EXYNOS4_GPIO_F34,
+ EXYNOS4_GPIO_F35,
+ EXYNOS4_GPIO_F36,
+ EXYNOS4_GPIO_F37,
-struct exynos4_gpio_part3 {
- struct s5p_gpio_bank z;
-};
+ /* GPIO_PART2_STARTS */
+ EXYNOS4_GPIO_MAX_PORT_PART_1, /* 128 0x80 */
+ EXYNOS4_GPIO_J00 = EXYNOS4_GPIO_MAX_PORT_PART_1,
+ EXYNOS4_GPIO_J01,
+ EXYNOS4_GPIO_J02,
+ EXYNOS4_GPIO_J03,
+ EXYNOS4_GPIO_J04,
+ EXYNOS4_GPIO_J05,
+ EXYNOS4_GPIO_J06,
+ EXYNOS4_GPIO_J07,
+ EXYNOS4_GPIO_J10, /* 136 0x88 */
+ EXYNOS4_GPIO_J11,
+ EXYNOS4_GPIO_J12,
+ EXYNOS4_GPIO_J13,
+ EXYNOS4_GPIO_J14,
+ EXYNOS4_GPIO_J15,
+ EXYNOS4_GPIO_J16,
+ EXYNOS4_GPIO_J17,
+ EXYNOS4_GPIO_K00, /* 144 0x90 */
+ EXYNOS4_GPIO_K01,
+ EXYNOS4_GPIO_K02,
+ EXYNOS4_GPIO_K03,
+ EXYNOS4_GPIO_K04,
+ EXYNOS4_GPIO_K05,
+ EXYNOS4_GPIO_K06,
+ EXYNOS4_GPIO_K07,
+ EXYNOS4_GPIO_K10, /* 152 0x98 */
+ EXYNOS4_GPIO_K11,
+ EXYNOS4_GPIO_K12,
+ EXYNOS4_GPIO_K13,
+ EXYNOS4_GPIO_K14,
+ EXYNOS4_GPIO_K15,
+ EXYNOS4_GPIO_K16,
+ EXYNOS4_GPIO_K17,
+ EXYNOS4_GPIO_K20, /* 160 0xA0 */
+ EXYNOS4_GPIO_K21,
+ EXYNOS4_GPIO_K22,
+ EXYNOS4_GPIO_K23,
+ EXYNOS4_GPIO_K24,
+ EXYNOS4_GPIO_K25,
+ EXYNOS4_GPIO_K26,
+ EXYNOS4_GPIO_K27,
+ EXYNOS4_GPIO_K30, /* 168 0xA8 */
+ EXYNOS4_GPIO_K31,
+ EXYNOS4_GPIO_K32,
+ EXYNOS4_GPIO_K33,
+ EXYNOS4_GPIO_K34,
+ EXYNOS4_GPIO_K35,
+ EXYNOS4_GPIO_K36,
+ EXYNOS4_GPIO_K37,
+ EXYNOS4_GPIO_L00, /* 176 0xB0 */
+ EXYNOS4_GPIO_L01,
+ EXYNOS4_GPIO_L02,
+ EXYNOS4_GPIO_L03,
+ EXYNOS4_GPIO_L04,
+ EXYNOS4_GPIO_L05,
+ EXYNOS4_GPIO_L06,
+ EXYNOS4_GPIO_L07,
+ EXYNOS4_GPIO_L10, /* 184 0xB8 */
+ EXYNOS4_GPIO_L11,
+ EXYNOS4_GPIO_L12,
+ EXYNOS4_GPIO_L13,
+ EXYNOS4_GPIO_L14,
+ EXYNOS4_GPIO_L15,
+ EXYNOS4_GPIO_L16,
+ EXYNOS4_GPIO_L17,
+ EXYNOS4_GPIO_L20, /* 192 0xC0 */
+ EXYNOS4_GPIO_L21,
+ EXYNOS4_GPIO_L22,
+ EXYNOS4_GPIO_L23,
+ EXYNOS4_GPIO_L24,
+ EXYNOS4_GPIO_L25,
+ EXYNOS4_GPIO_L26,
+ EXYNOS4_GPIO_L27,
+ EXYNOS4_GPIO_Y00, /* 200 0xC8 */
+ EXYNOS4_GPIO_Y01,
+ EXYNOS4_GPIO_Y02,
+ EXYNOS4_GPIO_Y03,
+ EXYNOS4_GPIO_Y04,
+ EXYNOS4_GPIO_Y05,
+ EXYNOS4_GPIO_Y06,
+ EXYNOS4_GPIO_Y07,
+ EXYNOS4_GPIO_Y10, /* 208 0xD0 */
+ EXYNOS4_GPIO_Y11,
+ EXYNOS4_GPIO_Y12,
+ EXYNOS4_GPIO_Y13,
+ EXYNOS4_GPIO_Y14,
+ EXYNOS4_GPIO_Y15,
+ EXYNOS4_GPIO_Y16,
+ EXYNOS4_GPIO_Y17,
+ EXYNOS4_GPIO_Y20, /* 216 0xD8 */
+ EXYNOS4_GPIO_Y21,
+ EXYNOS4_GPIO_Y22,
+ EXYNOS4_GPIO_Y23,
+ EXYNOS4_GPIO_Y24,
+ EXYNOS4_GPIO_Y25,
+ EXYNOS4_GPIO_Y26,
+ EXYNOS4_GPIO_Y27,
+ EXYNOS4_GPIO_Y30, /* 224 0xE0 */
+ EXYNOS4_GPIO_Y31,
+ EXYNOS4_GPIO_Y32,
+ EXYNOS4_GPIO_Y33,
+ EXYNOS4_GPIO_Y34,
+ EXYNOS4_GPIO_Y35,
+ EXYNOS4_GPIO_Y36,
+ EXYNOS4_GPIO_Y37,
+ EXYNOS4_GPIO_Y40, /* 232 0xE8 */
+ EXYNOS4_GPIO_Y41,
+ EXYNOS4_GPIO_Y42,
+ EXYNOS4_GPIO_Y43,
+ EXYNOS4_GPIO_Y44,
+ EXYNOS4_GPIO_Y45,
+ EXYNOS4_GPIO_Y46,
+ EXYNOS4_GPIO_Y47,
+ EXYNOS4_GPIO_Y50, /* 240 0xF0 */
+ EXYNOS4_GPIO_Y51,
+ EXYNOS4_GPIO_Y52,
+ EXYNOS4_GPIO_Y53,
+ EXYNOS4_GPIO_Y54,
+ EXYNOS4_GPIO_Y55,
+ EXYNOS4_GPIO_Y56,
+ EXYNOS4_GPIO_Y57,
+ EXYNOS4_GPIO_Y60, /* 248 0xF8 */
+ EXYNOS4_GPIO_Y61,
+ EXYNOS4_GPIO_Y62,
+ EXYNOS4_GPIO_Y63,
+ EXYNOS4_GPIO_Y64,
+ EXYNOS4_GPIO_Y65,
+ EXYNOS4_GPIO_Y66,
+ EXYNOS4_GPIO_Y67,
+ EXYNOS4_GPIO_X00 = 896, /* 896 0x380 */
+ EXYNOS4_GPIO_X01,
+ EXYNOS4_GPIO_X02,
+ EXYNOS4_GPIO_X03,
+ EXYNOS4_GPIO_X04,
+ EXYNOS4_GPIO_X05,
+ EXYNOS4_GPIO_X06,
+ EXYNOS4_GPIO_X07,
+ EXYNOS4_GPIO_X10, /* 904 0x388 */
+ EXYNOS4_GPIO_X11,
+ EXYNOS4_GPIO_X12,
+ EXYNOS4_GPIO_X13,
+ EXYNOS4_GPIO_X14,
+ EXYNOS4_GPIO_X15,
+ EXYNOS4_GPIO_X16,
+ EXYNOS4_GPIO_X17,
+ EXYNOS4_GPIO_X20, /* 912 0x390 */
+ EXYNOS4_GPIO_X21,
+ EXYNOS4_GPIO_X22,
+ EXYNOS4_GPIO_X23,
+ EXYNOS4_GPIO_X24,
+ EXYNOS4_GPIO_X25,
+ EXYNOS4_GPIO_X26,
+ EXYNOS4_GPIO_X27,
+ EXYNOS4_GPIO_X30, /* 920 0x398 */
+ EXYNOS4_GPIO_X31,
+ EXYNOS4_GPIO_X32,
+ EXYNOS4_GPIO_X33,
+ EXYNOS4_GPIO_X34,
+ EXYNOS4_GPIO_X35,
+ EXYNOS4_GPIO_X36,
+ EXYNOS4_GPIO_X37,
+
+ /* GPIO_PART3_STARTS */
+ EXYNOS4_GPIO_MAX_PORT_PART_2, /* 928 0x3A0 */
+ EXYNOS4_GPIO_Z0 = EXYNOS4_GPIO_MAX_PORT_PART_2,
+ EXYNOS4_GPIO_Z1,
+ EXYNOS4_GPIO_Z2,
+ EXYNOS4_GPIO_Z3,
+ EXYNOS4_GPIO_Z4,
+ EXYNOS4_GPIO_Z5,
+ EXYNOS4_GPIO_Z6,
+ EXYNOS4_GPIO_Z7,
-struct exynos4x12_gpio_part1 {
- struct s5p_gpio_bank a0;
- struct s5p_gpio_bank a1;
- struct s5p_gpio_bank b;
- struct s5p_gpio_bank c0;
- struct s5p_gpio_bank c1;
- struct s5p_gpio_bank d0;
- struct s5p_gpio_bank d1;
- struct s5p_gpio_bank res1[0x5];
- struct s5p_gpio_bank f0;
- struct s5p_gpio_bank f1;
- struct s5p_gpio_bank f2;
- struct s5p_gpio_bank f3;
- struct s5p_gpio_bank res2[0x2];
- struct s5p_gpio_bank j0;
- struct s5p_gpio_bank j1;
+ EXYNOS4_GPIO_MAX_PORT
};
-struct exynos4x12_gpio_part2 {
- struct s5p_gpio_bank res1[0x2];
- struct s5p_gpio_bank k0;
- struct s5p_gpio_bank k1;
- struct s5p_gpio_bank k2;
- struct s5p_gpio_bank k3;
- struct s5p_gpio_bank l0;
- struct s5p_gpio_bank l1;
- struct s5p_gpio_bank l2;
- struct s5p_gpio_bank y0;
- struct s5p_gpio_bank y1;
- struct s5p_gpio_bank y2;
- struct s5p_gpio_bank y3;
- struct s5p_gpio_bank y4;
- struct s5p_gpio_bank y5;
- struct s5p_gpio_bank y6;
- struct s5p_gpio_bank res2[0x3];
- struct s5p_gpio_bank m0;
- struct s5p_gpio_bank m1;
- struct s5p_gpio_bank m2;
- struct s5p_gpio_bank m3;
- struct s5p_gpio_bank m4;
- struct s5p_gpio_bank res3[0x48];
- struct s5p_gpio_bank x0;
- struct s5p_gpio_bank x1;
- struct s5p_gpio_bank x2;
- struct s5p_gpio_bank x3;
+enum exynos4X12_gpio_pin {
+ /* GPIO_PART1_STARTS */
+ EXYNOS4X12_GPIO_A00, /* 0 */
+ EXYNOS4X12_GPIO_A01,
+ EXYNOS4X12_GPIO_A02,
+ EXYNOS4X12_GPIO_A03,
+ EXYNOS4X12_GPIO_A04,
+ EXYNOS4X12_GPIO_A05,
+ EXYNOS4X12_GPIO_A06,
+ EXYNOS4X12_GPIO_A07,
+ EXYNOS4X12_GPIO_A10, /* 8 */
+ EXYNOS4X12_GPIO_A11,
+ EXYNOS4X12_GPIO_A12,
+ EXYNOS4X12_GPIO_A13,
+ EXYNOS4X12_GPIO_A14,
+ EXYNOS4X12_GPIO_A15,
+ EXYNOS4X12_GPIO_A16,
+ EXYNOS4X12_GPIO_A17,
+ EXYNOS4X12_GPIO_B0, /* 16 0x10 */
+ EXYNOS4X12_GPIO_B1,
+ EXYNOS4X12_GPIO_B2,
+ EXYNOS4X12_GPIO_B3,
+ EXYNOS4X12_GPIO_B4,
+ EXYNOS4X12_GPIO_B5,
+ EXYNOS4X12_GPIO_B6,
+ EXYNOS4X12_GPIO_B7,
+ EXYNOS4X12_GPIO_C00, /* 24 0x18 */
+ EXYNOS4X12_GPIO_C01,
+ EXYNOS4X12_GPIO_C02,
+ EXYNOS4X12_GPIO_C03,
+ EXYNOS4X12_GPIO_C04,
+ EXYNOS4X12_GPIO_C05,
+ EXYNOS4X12_GPIO_C06,
+ EXYNOS4X12_GPIO_C07,
+ EXYNOS4X12_GPIO_C10, /* 32 0x20 */
+ EXYNOS4X12_GPIO_C11,
+ EXYNOS4X12_GPIO_C12,
+ EXYNOS4X12_GPIO_C13,
+ EXYNOS4X12_GPIO_C14,
+ EXYNOS4X12_GPIO_C15,
+ EXYNOS4X12_GPIO_C16,
+ EXYNOS4X12_GPIO_C17,
+ EXYNOS4X12_GPIO_D00, /* 40 0x28 */
+ EXYNOS4X12_GPIO_D01,
+ EXYNOS4X12_GPIO_D02,
+ EXYNOS4X12_GPIO_D03,
+ EXYNOS4X12_GPIO_D04,
+ EXYNOS4X12_GPIO_D05,
+ EXYNOS4X12_GPIO_D06,
+ EXYNOS4X12_GPIO_D07,
+ EXYNOS4X12_GPIO_D10, /* 48 0x30 */
+ EXYNOS4X12_GPIO_D11,
+ EXYNOS4X12_GPIO_D12,
+ EXYNOS4X12_GPIO_D13,
+ EXYNOS4X12_GPIO_D14,
+ EXYNOS4X12_GPIO_D15,
+ EXYNOS4X12_GPIO_D16,
+ EXYNOS4X12_GPIO_D17,
+ EXYNOS4X12_GPIO_F00 = 96, /* 96 0x60 */
+ EXYNOS4X12_GPIO_F01,
+ EXYNOS4X12_GPIO_F02,
+ EXYNOS4X12_GPIO_F03,
+ EXYNOS4X12_GPIO_F04,
+ EXYNOS4X12_GPIO_F05,
+ EXYNOS4X12_GPIO_F06,
+ EXYNOS4X12_GPIO_F07,
+ EXYNOS4X12_GPIO_F10, /* 104 0x68 */
+ EXYNOS4X12_GPIO_F11,
+ EXYNOS4X12_GPIO_F12,
+ EXYNOS4X12_GPIO_F13,
+ EXYNOS4X12_GPIO_F14,
+ EXYNOS4X12_GPIO_F15,
+ EXYNOS4X12_GPIO_F16,
+ EXYNOS4X12_GPIO_F17,
+ EXYNOS4X12_GPIO_F20, /* 112 0x70 */
+ EXYNOS4X12_GPIO_F21,
+ EXYNOS4X12_GPIO_F22,
+ EXYNOS4X12_GPIO_F23,
+ EXYNOS4X12_GPIO_F24,
+ EXYNOS4X12_GPIO_F25,
+ EXYNOS4X12_GPIO_F26,
+ EXYNOS4X12_GPIO_F27,
+ EXYNOS4X12_GPIO_F30, /* 120 0x78 */
+ EXYNOS4X12_GPIO_F31,
+ EXYNOS4X12_GPIO_F32,
+ EXYNOS4X12_GPIO_F33,
+ EXYNOS4X12_GPIO_F34,
+ EXYNOS4X12_GPIO_F35,
+ EXYNOS4X12_GPIO_F36,
+ EXYNOS4X12_GPIO_F37,
+ EXYNOS4X12_GPIO_J00 = 144, /* 144 0x90 */
+ EXYNOS4X12_GPIO_J01,
+ EXYNOS4X12_GPIO_J02,
+ EXYNOS4X12_GPIO_J03,
+ EXYNOS4X12_GPIO_J04,
+ EXYNOS4X12_GPIO_J05,
+ EXYNOS4X12_GPIO_J06,
+ EXYNOS4X12_GPIO_J07,
+ EXYNOS4X12_GPIO_J10, /* 152 0x98 */
+ EXYNOS4X12_GPIO_J11,
+ EXYNOS4X12_GPIO_J12,
+ EXYNOS4X12_GPIO_J13,
+ EXYNOS4X12_GPIO_J14,
+ EXYNOS4X12_GPIO_J15,
+ EXYNOS4X12_GPIO_J16,
+ EXYNOS4X12_GPIO_J17,
+
+ /* GPIO_PART2_STARTS */
+ EXYNOS4X12_GPIO_MAX_PORT_PART_1,/* 160 0xA0 */
+ EXYNOS4X12_GPIO_K00 = 176, /* 176 0xB0 */
+ EXYNOS4X12_GPIO_K01,
+ EXYNOS4X12_GPIO_K02,
+ EXYNOS4X12_GPIO_K03,
+ EXYNOS4X12_GPIO_K04,
+ EXYNOS4X12_GPIO_K05,
+ EXYNOS4X12_GPIO_K06,
+ EXYNOS4X12_GPIO_K07,
+ EXYNOS4X12_GPIO_K10, /* 184 0xB8 */
+ EXYNOS4X12_GPIO_K11,
+ EXYNOS4X12_GPIO_K12,
+ EXYNOS4X12_GPIO_K13,
+ EXYNOS4X12_GPIO_K14,
+ EXYNOS4X12_GPIO_K15,
+ EXYNOS4X12_GPIO_K16,
+ EXYNOS4X12_GPIO_K17,
+ EXYNOS4X12_GPIO_K20, /* 192 0xC0 */
+ EXYNOS4X12_GPIO_K21,
+ EXYNOS4X12_GPIO_K22,
+ EXYNOS4X12_GPIO_K23,
+ EXYNOS4X12_GPIO_K24,
+ EXYNOS4X12_GPIO_K25,
+ EXYNOS4X12_GPIO_K26,
+ EXYNOS4X12_GPIO_K27,
+ EXYNOS4X12_GPIO_K30, /* 200 0xC8 */
+ EXYNOS4X12_GPIO_K31,
+ EXYNOS4X12_GPIO_K32,
+ EXYNOS4X12_GPIO_K33,
+ EXYNOS4X12_GPIO_K34,
+ EXYNOS4X12_GPIO_K35,
+ EXYNOS4X12_GPIO_K36,
+ EXYNOS4X12_GPIO_K37,
+ EXYNOS4X12_GPIO_L00, /* 208 0xD0 */
+ EXYNOS4X12_GPIO_L01,
+ EXYNOS4X12_GPIO_L02,
+ EXYNOS4X12_GPIO_L03,
+ EXYNOS4X12_GPIO_L04,
+ EXYNOS4X12_GPIO_L05,
+ EXYNOS4X12_GPIO_L06,
+ EXYNOS4X12_GPIO_L07,
+ EXYNOS4X12_GPIO_L10, /* 216 0xD8 */
+ EXYNOS4X12_GPIO_L11,
+ EXYNOS4X12_GPIO_L12,
+ EXYNOS4X12_GPIO_L13,
+ EXYNOS4X12_GPIO_L14,
+ EXYNOS4X12_GPIO_L15,
+ EXYNOS4X12_GPIO_L16,
+ EXYNOS4X12_GPIO_L17,
+ EXYNOS4X12_GPIO_L20, /* 224 0xE0 */
+ EXYNOS4X12_GPIO_L21,
+ EXYNOS4X12_GPIO_L22,
+ EXYNOS4X12_GPIO_L23,
+ EXYNOS4X12_GPIO_L24,
+ EXYNOS4X12_GPIO_L25,
+ EXYNOS4X12_GPIO_L26,
+ EXYNOS4X12_GPIO_L27,
+ EXYNOS4X12_GPIO_Y00, /* 232 0xE8 */
+ EXYNOS4X12_GPIO_Y01,
+ EXYNOS4X12_GPIO_Y02,
+ EXYNOS4X12_GPIO_Y03,
+ EXYNOS4X12_GPIO_Y04,
+ EXYNOS4X12_GPIO_Y05,
+ EXYNOS4X12_GPIO_Y06,
+ EXYNOS4X12_GPIO_Y07,
+ EXYNOS4X12_GPIO_Y10, /* 240 0xF0 */
+ EXYNOS4X12_GPIO_Y11,
+ EXYNOS4X12_GPIO_Y12,
+ EXYNOS4X12_GPIO_Y13,
+ EXYNOS4X12_GPIO_Y14,
+ EXYNOS4X12_GPIO_Y15,
+ EXYNOS4X12_GPIO_Y16,
+ EXYNOS4X12_GPIO_Y17,
+ EXYNOS4X12_GPIO_Y20, /* 248 0xF8 */
+ EXYNOS4X12_GPIO_Y21,
+ EXYNOS4X12_GPIO_Y22,
+ EXYNOS4X12_GPIO_Y23,
+ EXYNOS4X12_GPIO_Y24,
+ EXYNOS4X12_GPIO_Y25,
+ EXYNOS4X12_GPIO_Y26,
+ EXYNOS4X12_GPIO_Y27,
+ EXYNOS4X12_GPIO_Y30, /* 256 0x100 */
+ EXYNOS4X12_GPIO_Y31,
+ EXYNOS4X12_GPIO_Y32,
+ EXYNOS4X12_GPIO_Y33,
+ EXYNOS4X12_GPIO_Y34,
+ EXYNOS4X12_GPIO_Y35,
+ EXYNOS4X12_GPIO_Y36,
+ EXYNOS4X12_GPIO_Y37,
+ EXYNOS4X12_GPIO_Y40, /* 264 0x108 */
+ EXYNOS4X12_GPIO_Y41,
+ EXYNOS4X12_GPIO_Y42,
+ EXYNOS4X12_GPIO_Y43,
+ EXYNOS4X12_GPIO_Y44,
+ EXYNOS4X12_GPIO_Y45,
+ EXYNOS4X12_GPIO_Y46,
+ EXYNOS4X12_GPIO_Y47,
+ EXYNOS4X12_GPIO_Y50, /* 272 0x110 */
+ EXYNOS4X12_GPIO_Y51,
+ EXYNOS4X12_GPIO_Y52,
+ EXYNOS4X12_GPIO_Y53,
+ EXYNOS4X12_GPIO_Y54,
+ EXYNOS4X12_GPIO_Y55,
+ EXYNOS4X12_GPIO_Y56,
+ EXYNOS4X12_GPIO_Y57,
+ EXYNOS4X12_GPIO_Y60, /* 280 0x118 */
+ EXYNOS4X12_GPIO_Y61,
+ EXYNOS4X12_GPIO_Y62,
+ EXYNOS4X12_GPIO_Y63,
+ EXYNOS4X12_GPIO_Y64,
+ EXYNOS4X12_GPIO_Y65,
+ EXYNOS4X12_GPIO_Y66,
+ EXYNOS4X12_GPIO_Y67,
+ EXYNOS4X12_GPIO_M00 = 312, /* 312 0xF0 */
+ EXYNOS4X12_GPIO_M01,
+ EXYNOS4X12_GPIO_M02,
+ EXYNOS4X12_GPIO_M03,
+ EXYNOS4X12_GPIO_M04,
+ EXYNOS4X12_GPIO_M05,
+ EXYNOS4X12_GPIO_M06,
+ EXYNOS4X12_GPIO_M07,
+ EXYNOS4X12_GPIO_M10, /* 320 0xF8 */
+ EXYNOS4X12_GPIO_M11,
+ EXYNOS4X12_GPIO_M12,
+ EXYNOS4X12_GPIO_M13,
+ EXYNOS4X12_GPIO_M14,
+ EXYNOS4X12_GPIO_M15,
+ EXYNOS4X12_GPIO_M16,
+ EXYNOS4X12_GPIO_M17,
+ EXYNOS4X12_GPIO_M20, /* 328 0x100 */
+ EXYNOS4X12_GPIO_M21,
+ EXYNOS4X12_GPIO_M22,
+ EXYNOS4X12_GPIO_M23,
+ EXYNOS4X12_GPIO_M24,
+ EXYNOS4X12_GPIO_M25,
+ EXYNOS4X12_GPIO_M26,
+ EXYNOS4X12_GPIO_M27,
+ EXYNOS4X12_GPIO_M30, /* 336 0x108 */
+ EXYNOS4X12_GPIO_M31,
+ EXYNOS4X12_GPIO_M32,
+ EXYNOS4X12_GPIO_M33,
+ EXYNOS4X12_GPIO_M34,
+ EXYNOS4X12_GPIO_M35,
+ EXYNOS4X12_GPIO_M36,
+ EXYNOS4X12_GPIO_M37,
+ EXYNOS4X12_GPIO_M40, /* 344 0x110 */
+ EXYNOS4X12_GPIO_M41,
+ EXYNOS4X12_GPIO_M42,
+ EXYNOS4X12_GPIO_M43,
+ EXYNOS4X12_GPIO_M44,
+ EXYNOS4X12_GPIO_M45,
+ EXYNOS4X12_GPIO_M46,
+ EXYNOS4X12_GPIO_M47,
+ EXYNOS4X12_GPIO_X00 = 928, /* 928 0x3A0 */
+ EXYNOS4X12_GPIO_X01,
+ EXYNOS4X12_GPIO_X02,
+ EXYNOS4X12_GPIO_X03,
+ EXYNOS4X12_GPIO_X04,
+ EXYNOS4X12_GPIO_X05,
+ EXYNOS4X12_GPIO_X06,
+ EXYNOS4X12_GPIO_X07,
+ EXYNOS4X12_GPIO_X10, /* 936 0x3A8 */
+ EXYNOS4X12_GPIO_X11,
+ EXYNOS4X12_GPIO_X12,
+ EXYNOS4X12_GPIO_X13,
+ EXYNOS4X12_GPIO_X14,
+ EXYNOS4X12_GPIO_X15,
+ EXYNOS4X12_GPIO_X16,
+ EXYNOS4X12_GPIO_X17,
+ EXYNOS4X12_GPIO_X20, /* 944 0x3B0 */
+ EXYNOS4X12_GPIO_X21,
+ EXYNOS4X12_GPIO_X22,
+ EXYNOS4X12_GPIO_X23,
+ EXYNOS4X12_GPIO_X24,
+ EXYNOS4X12_GPIO_X25,
+ EXYNOS4X12_GPIO_X26,
+ EXYNOS4X12_GPIO_X27,
+ EXYNOS4X12_GPIO_X30, /* 952 0x3B8 */
+ EXYNOS4X12_GPIO_X31,
+ EXYNOS4X12_GPIO_X32,
+ EXYNOS4X12_GPIO_X33,
+ EXYNOS4X12_GPIO_X34,
+ EXYNOS4X12_GPIO_X35,
+ EXYNOS4X12_GPIO_X36,
+ EXYNOS4X12_GPIO_X37,
+
+ /* GPIO_PART3_STARTS */
+ EXYNOS4X12_GPIO_MAX_PORT_PART_2,/* 960 0x3C0 */
+ EXYNOS4X12_GPIO_Z0 = EXYNOS4X12_GPIO_MAX_PORT_PART_2,
+ EXYNOS4X12_GPIO_Z1,
+ EXYNOS4X12_GPIO_Z2,
+ EXYNOS4X12_GPIO_Z3,
+ EXYNOS4X12_GPIO_Z4,
+ EXYNOS4X12_GPIO_Z5,
+ EXYNOS4X12_GPIO_Z6,
+ EXYNOS4X12_GPIO_Z7,
+
+ /* GPIO_PART4_STARTS */
+ EXYNOS4X12_GPIO_MAX_PORT_PART_3,/* 968 0x3C8 */
+ EXYNOS4X12_GPIO_V00 = EXYNOS4X12_GPIO_MAX_PORT_PART_3,
+ EXYNOS4X12_GPIO_V01,
+ EXYNOS4X12_GPIO_V02,
+ EXYNOS4X12_GPIO_V03,
+ EXYNOS4X12_GPIO_V04,
+ EXYNOS4X12_GPIO_V05,
+ EXYNOS4X12_GPIO_V06,
+ EXYNOS4X12_GPIO_V07,
+ EXYNOS4X12_GPIO_V10, /* 976 0x3D0 */
+ EXYNOS4X12_GPIO_V11,
+ EXYNOS4X12_GPIO_V12,
+ EXYNOS4X12_GPIO_V13,
+ EXYNOS4X12_GPIO_V14,
+ EXYNOS4X12_GPIO_V15,
+ EXYNOS4X12_GPIO_V16,
+ EXYNOS4X12_GPIO_V17,
+ EXYNOS4X12_GPIO_V20 = 992, /* 992 0x3E0 */
+ EXYNOS4X12_GPIO_V21,
+ EXYNOS4X12_GPIO_V22,
+ EXYNOS4X12_GPIO_V23,
+ EXYNOS4X12_GPIO_V24,
+ EXYNOS4X12_GPIO_V25,
+ EXYNOS4X12_GPIO_V26,
+ EXYNOS4X12_GPIO_V27,
+ EXYNOS4X12_GPIO_V30 = 1000, /* 1000 0x3E8 */
+ EXYNOS4X12_GPIO_V31,
+ EXYNOS4X12_GPIO_V32,
+ EXYNOS4X12_GPIO_V33,
+ EXYNOS4X12_GPIO_V34,
+ EXYNOS4X12_GPIO_V35,
+ EXYNOS4X12_GPIO_V36,
+ EXYNOS4X12_GPIO_V37,
+ EXYNOS4X12_GPIO_V40 = 1016, /* 1016 0x3F8 */
+ EXYNOS4X12_GPIO_V41,
+ EXYNOS4X12_GPIO_V42,
+ EXYNOS4X12_GPIO_V43,
+ EXYNOS4X12_GPIO_V44,
+ EXYNOS4X12_GPIO_V45,
+ EXYNOS4X12_GPIO_V46,
+ EXYNOS4X12_GPIO_V47,
+
+ EXYNOS4X12_GPIO_MAX_PORT
};
-struct exynos4x12_gpio_part3 {
- struct s5p_gpio_bank z;
+enum exynos5_gpio_pin {
+ /* GPIO_PART1_STARTS */
+ EXYNOS5_GPIO_A00, /* 0 */
+ EXYNOS5_GPIO_A01,
+ EXYNOS5_GPIO_A02,
+ EXYNOS5_GPIO_A03,
+ EXYNOS5_GPIO_A04,
+ EXYNOS5_GPIO_A05,
+ EXYNOS5_GPIO_A06,
+ EXYNOS5_GPIO_A07,
+ EXYNOS5_GPIO_A10, /* 8 */
+ EXYNOS5_GPIO_A11,
+ EXYNOS5_GPIO_A12,
+ EXYNOS5_GPIO_A13,
+ EXYNOS5_GPIO_A14,
+ EXYNOS5_GPIO_A15,
+ EXYNOS5_GPIO_A16,
+ EXYNOS5_GPIO_A17,
+ EXYNOS5_GPIO_A20, /* 16 0x10 */
+ EXYNOS5_GPIO_A21,
+ EXYNOS5_GPIO_A22,
+ EXYNOS5_GPIO_A23,
+ EXYNOS5_GPIO_A24,
+ EXYNOS5_GPIO_A25,
+ EXYNOS5_GPIO_A26,
+ EXYNOS5_GPIO_A27,
+ EXYNOS5_GPIO_B00, /* 24 0x18 */
+ EXYNOS5_GPIO_B01,
+ EXYNOS5_GPIO_B02,
+ EXYNOS5_GPIO_B03,
+ EXYNOS5_GPIO_B04,
+ EXYNOS5_GPIO_B05,
+ EXYNOS5_GPIO_B06,
+ EXYNOS5_GPIO_B07,
+ EXYNOS5_GPIO_B10, /* 32 0x20 */
+ EXYNOS5_GPIO_B11,
+ EXYNOS5_GPIO_B12,
+ EXYNOS5_GPIO_B13,
+ EXYNOS5_GPIO_B14,
+ EXYNOS5_GPIO_B15,
+ EXYNOS5_GPIO_B16,
+ EXYNOS5_GPIO_B17,
+ EXYNOS5_GPIO_B20, /* 40 0x28 */
+ EXYNOS5_GPIO_B21,
+ EXYNOS5_GPIO_B22,
+ EXYNOS5_GPIO_B23,
+ EXYNOS5_GPIO_B24,
+ EXYNOS5_GPIO_B25,
+ EXYNOS5_GPIO_B26,
+ EXYNOS5_GPIO_B27,
+ EXYNOS5_GPIO_B30, /* 48 0x39 */
+ EXYNOS5_GPIO_B31,
+ EXYNOS5_GPIO_B32,
+ EXYNOS5_GPIO_B33,
+ EXYNOS5_GPIO_B34,
+ EXYNOS5_GPIO_B35,
+ EXYNOS5_GPIO_B36,
+ EXYNOS5_GPIO_B37,
+ EXYNOS5_GPIO_C00, /* 56 0x38 */
+ EXYNOS5_GPIO_C01,
+ EXYNOS5_GPIO_C02,
+ EXYNOS5_GPIO_C03,
+ EXYNOS5_GPIO_C04,
+ EXYNOS5_GPIO_C05,
+ EXYNOS5_GPIO_C06,
+ EXYNOS5_GPIO_C07,
+ EXYNOS5_GPIO_C10, /* 64 0x40 */
+ EXYNOS5_GPIO_C11,
+ EXYNOS5_GPIO_C12,
+ EXYNOS5_GPIO_C13,
+ EXYNOS5_GPIO_C14,
+ EXYNOS5_GPIO_C15,
+ EXYNOS5_GPIO_C16,
+ EXYNOS5_GPIO_C17,
+ EXYNOS5_GPIO_C20, /* 72 0x48 */
+ EXYNOS5_GPIO_C21,
+ EXYNOS5_GPIO_C22,
+ EXYNOS5_GPIO_C23,
+ EXYNOS5_GPIO_C24,
+ EXYNOS5_GPIO_C25,
+ EXYNOS5_GPIO_C26,
+ EXYNOS5_GPIO_C27,
+ EXYNOS5_GPIO_C30, /* 80 0x50 */
+ EXYNOS5_GPIO_C31,
+ EXYNOS5_GPIO_C32,
+ EXYNOS5_GPIO_C33,
+ EXYNOS5_GPIO_C34,
+ EXYNOS5_GPIO_C35,
+ EXYNOS5_GPIO_C36,
+ EXYNOS5_GPIO_C37,
+ EXYNOS5_GPIO_D00, /* 88 0x58 */
+ EXYNOS5_GPIO_D01,
+ EXYNOS5_GPIO_D02,
+ EXYNOS5_GPIO_D03,
+ EXYNOS5_GPIO_D04,
+ EXYNOS5_GPIO_D05,
+ EXYNOS5_GPIO_D06,
+ EXYNOS5_GPIO_D07,
+ EXYNOS5_GPIO_D10, /* 96 0x60 */
+ EXYNOS5_GPIO_D11,
+ EXYNOS5_GPIO_D12,
+ EXYNOS5_GPIO_D13,
+ EXYNOS5_GPIO_D14,
+ EXYNOS5_GPIO_D15,
+ EXYNOS5_GPIO_D16,
+ EXYNOS5_GPIO_D17,
+ EXYNOS5_GPIO_Y00, /* 104 0x68 */
+ EXYNOS5_GPIO_Y01,
+ EXYNOS5_GPIO_Y02,
+ EXYNOS5_GPIO_Y03,
+ EXYNOS5_GPIO_Y04,
+ EXYNOS5_GPIO_Y05,
+ EXYNOS5_GPIO_Y06,
+ EXYNOS5_GPIO_Y07,
+ EXYNOS5_GPIO_Y10, /* 112 0x70 */
+ EXYNOS5_GPIO_Y11,
+ EXYNOS5_GPIO_Y12,
+ EXYNOS5_GPIO_Y13,
+ EXYNOS5_GPIO_Y14,
+ EXYNOS5_GPIO_Y15,
+ EXYNOS5_GPIO_Y16,
+ EXYNOS5_GPIO_Y17,
+ EXYNOS5_GPIO_Y20, /* 120 0x78 */
+ EXYNOS5_GPIO_Y21,
+ EXYNOS5_GPIO_Y22,
+ EXYNOS5_GPIO_Y23,
+ EXYNOS5_GPIO_Y24,
+ EXYNOS5_GPIO_Y25,
+ EXYNOS5_GPIO_Y26,
+ EXYNOS5_GPIO_Y27,
+ EXYNOS5_GPIO_Y30, /* 128 0x80 */
+ EXYNOS5_GPIO_Y31,
+ EXYNOS5_GPIO_Y32,
+ EXYNOS5_GPIO_Y33,
+ EXYNOS5_GPIO_Y34,
+ EXYNOS5_GPIO_Y35,
+ EXYNOS5_GPIO_Y36,
+ EXYNOS5_GPIO_Y37,
+ EXYNOS5_GPIO_Y40, /* 136 0x88 */
+ EXYNOS5_GPIO_Y41,
+ EXYNOS5_GPIO_Y42,
+ EXYNOS5_GPIO_Y43,
+ EXYNOS5_GPIO_Y44,
+ EXYNOS5_GPIO_Y45,
+ EXYNOS5_GPIO_Y46,
+ EXYNOS5_GPIO_Y47,
+ EXYNOS5_GPIO_Y50, /* 144 0x90 */
+ EXYNOS5_GPIO_Y51,
+ EXYNOS5_GPIO_Y52,
+ EXYNOS5_GPIO_Y53,
+ EXYNOS5_GPIO_Y54,
+ EXYNOS5_GPIO_Y55,
+ EXYNOS5_GPIO_Y56,
+ EXYNOS5_GPIO_Y57,
+ EXYNOS5_GPIO_Y60, /* 152 0x98 */
+ EXYNOS5_GPIO_Y61,
+ EXYNOS5_GPIO_Y62,
+ EXYNOS5_GPIO_Y63,
+ EXYNOS5_GPIO_Y64,
+ EXYNOS5_GPIO_Y65,
+ EXYNOS5_GPIO_Y66,
+ EXYNOS5_GPIO_Y67,
+
+ /* GPIO_PART2_STARTS */
+ EXYNOS5_GPIO_MAX_PORT_PART_1, /* 160 0xa0 */
+ EXYNOS5_GPIO_C40 = EXYNOS5_GPIO_MAX_PORT_PART_1,
+ EXYNOS5_GPIO_C41,
+ EXYNOS5_GPIO_C42,
+ EXYNOS5_GPIO_C43,
+ EXYNOS5_GPIO_C44,
+ EXYNOS5_GPIO_C45,
+ EXYNOS5_GPIO_C46,
+ EXYNOS5_GPIO_C47,
+
+ /* GPIO_PART3_STARTS */
+ EXYNOS5_GPIO_MAX_PORT_PART_2, /* 168 0xa8 */
+ EXYNOS5_GPIO_X00 = EXYNOS5_GPIO_MAX_PORT_PART_2,
+ EXYNOS5_GPIO_X01,
+ EXYNOS5_GPIO_X02,
+ EXYNOS5_GPIO_X03,
+ EXYNOS5_GPIO_X04,
+ EXYNOS5_GPIO_X05,
+ EXYNOS5_GPIO_X06,
+ EXYNOS5_GPIO_X07,
+ EXYNOS5_GPIO_X10, /* 176 0xb0 */
+ EXYNOS5_GPIO_X11,
+ EXYNOS5_GPIO_X12,
+ EXYNOS5_GPIO_X13,
+ EXYNOS5_GPIO_X14,
+ EXYNOS5_GPIO_X15,
+ EXYNOS5_GPIO_X16,
+ EXYNOS5_GPIO_X17,
+ EXYNOS5_GPIO_X20, /* 184 0xb8 */
+ EXYNOS5_GPIO_X21,
+ EXYNOS5_GPIO_X22,
+ EXYNOS5_GPIO_X23,
+ EXYNOS5_GPIO_X24,
+ EXYNOS5_GPIO_X25,
+ EXYNOS5_GPIO_X26,
+ EXYNOS5_GPIO_X27,
+ EXYNOS5_GPIO_X30, /* 192 0xc0 */
+ EXYNOS5_GPIO_X31,
+ EXYNOS5_GPIO_X32,
+ EXYNOS5_GPIO_X33,
+ EXYNOS5_GPIO_X34,
+ EXYNOS5_GPIO_X35,
+ EXYNOS5_GPIO_X36,
+ EXYNOS5_GPIO_X37,
+
+ /* GPIO_PART4_STARTS */
+ EXYNOS5_GPIO_MAX_PORT_PART_3, /* 200 0xc8 */
+ EXYNOS5_GPIO_E00 = EXYNOS5_GPIO_MAX_PORT_PART_3,
+ EXYNOS5_GPIO_E01,
+ EXYNOS5_GPIO_E02,
+ EXYNOS5_GPIO_E03,
+ EXYNOS5_GPIO_E04,
+ EXYNOS5_GPIO_E05,
+ EXYNOS5_GPIO_E06,
+ EXYNOS5_GPIO_E07,
+ EXYNOS5_GPIO_E10, /* 208 0xd0 */
+ EXYNOS5_GPIO_E11,
+ EXYNOS5_GPIO_E12,
+ EXYNOS5_GPIO_E13,
+ EXYNOS5_GPIO_E14,
+ EXYNOS5_GPIO_E15,
+ EXYNOS5_GPIO_E16,
+ EXYNOS5_GPIO_E17,
+ EXYNOS5_GPIO_F00, /* 216 0xd8 */
+ EXYNOS5_GPIO_F01,
+ EXYNOS5_GPIO_F02,
+ EXYNOS5_GPIO_F03,
+ EXYNOS5_GPIO_F04,
+ EXYNOS5_GPIO_F05,
+ EXYNOS5_GPIO_F06,
+ EXYNOS5_GPIO_F07,
+ EXYNOS5_GPIO_F10, /* 224 0xe0 */
+ EXYNOS5_GPIO_F11,
+ EXYNOS5_GPIO_F12,
+ EXYNOS5_GPIO_F13,
+ EXYNOS5_GPIO_F14,
+ EXYNOS5_GPIO_F15,
+ EXYNOS5_GPIO_F16,
+ EXYNOS5_GPIO_F17,
+ EXYNOS5_GPIO_G00, /* 232 0xe8 */
+ EXYNOS5_GPIO_G01,
+ EXYNOS5_GPIO_G02,
+ EXYNOS5_GPIO_G03,
+ EXYNOS5_GPIO_G04,
+ EXYNOS5_GPIO_G05,
+ EXYNOS5_GPIO_G06,
+ EXYNOS5_GPIO_G07,
+ EXYNOS5_GPIO_G10, /* 240 0xf0 */
+ EXYNOS5_GPIO_G11,
+ EXYNOS5_GPIO_G12,
+ EXYNOS5_GPIO_G13,
+ EXYNOS5_GPIO_G14,
+ EXYNOS5_GPIO_G15,
+ EXYNOS5_GPIO_G16,
+ EXYNOS5_GPIO_G17,
+ EXYNOS5_GPIO_G20, /* 248 0xf8 */
+ EXYNOS5_GPIO_G21,
+ EXYNOS5_GPIO_G22,
+ EXYNOS5_GPIO_G23,
+ EXYNOS5_GPIO_G24,
+ EXYNOS5_GPIO_G25,
+ EXYNOS5_GPIO_G26,
+ EXYNOS5_GPIO_G27,
+ EXYNOS5_GPIO_H00, /* 256 0x100 */
+ EXYNOS5_GPIO_H01,
+ EXYNOS5_GPIO_H02,
+ EXYNOS5_GPIO_H03,
+ EXYNOS5_GPIO_H04,
+ EXYNOS5_GPIO_H05,
+ EXYNOS5_GPIO_H06,
+ EXYNOS5_GPIO_H07,
+ EXYNOS5_GPIO_H10, /* 264 0x108 */
+ EXYNOS5_GPIO_H11,
+ EXYNOS5_GPIO_H12,
+ EXYNOS5_GPIO_H13,
+ EXYNOS5_GPIO_H14,
+ EXYNOS5_GPIO_H15,
+ EXYNOS5_GPIO_H16,
+ EXYNOS5_GPIO_H17,
+
+ /* GPIO_PART4_STARTS */
+ EXYNOS5_GPIO_MAX_PORT_PART_4, /* 272 0x110 */
+ EXYNOS5_GPIO_V00 = EXYNOS5_GPIO_MAX_PORT_PART_4,
+ EXYNOS5_GPIO_V01,
+ EXYNOS5_GPIO_V02,
+ EXYNOS5_GPIO_V03,
+ EXYNOS5_GPIO_V04,
+ EXYNOS5_GPIO_V05,
+ EXYNOS5_GPIO_V06,
+ EXYNOS5_GPIO_V07,
+ EXYNOS5_GPIO_V10, /* 280 0x118 */
+ EXYNOS5_GPIO_V11,
+ EXYNOS5_GPIO_V12,
+ EXYNOS5_GPIO_V13,
+ EXYNOS5_GPIO_V14,
+ EXYNOS5_GPIO_V15,
+ EXYNOS5_GPIO_V16,
+ EXYNOS5_GPIO_V17,
+
+ /* GPIO_PART5_STARTS */
+ EXYNOS5_GPIO_MAX_PORT_PART_5, /* 288 0x120 */
+ EXYNOS5_GPIO_V20 = EXYNOS5_GPIO_MAX_PORT_PART_5,
+ EXYNOS5_GPIO_V21,
+ EXYNOS5_GPIO_V22,
+ EXYNOS5_GPIO_V23,
+ EXYNOS5_GPIO_V24,
+ EXYNOS5_GPIO_V25,
+ EXYNOS5_GPIO_V26,
+ EXYNOS5_GPIO_V27,
+ EXYNOS5_GPIO_V30, /* 296 0x128 */
+ EXYNOS5_GPIO_V31,
+ EXYNOS5_GPIO_V32,
+ EXYNOS5_GPIO_V33,
+ EXYNOS5_GPIO_V34,
+ EXYNOS5_GPIO_V35,
+ EXYNOS5_GPIO_V36,
+ EXYNOS5_GPIO_V37,
+
+ /* GPIO_PART6_STARTS */
+ EXYNOS5_GPIO_MAX_PORT_PART_6, /* 304 0x130 */
+ EXYNOS5_GPIO_V40 = EXYNOS5_GPIO_MAX_PORT_PART_6,
+ EXYNOS5_GPIO_V41,
+ EXYNOS5_GPIO_V42,
+ EXYNOS5_GPIO_V43,
+ EXYNOS5_GPIO_V44,
+ EXYNOS5_GPIO_V45,
+ EXYNOS5_GPIO_V46,
+ EXYNOS5_GPIO_V47,
+
+ /* GPIO_PART7_STARTS */ /* 312 0x138 */
+ EXYNOS5_GPIO_MAX_PORT_PART_7,
+ EXYNOS5_GPIO_Z0 = EXYNOS5_GPIO_MAX_PORT_PART_7,
+ EXYNOS5_GPIO_Z1,
+ EXYNOS5_GPIO_Z2,
+ EXYNOS5_GPIO_Z3,
+ EXYNOS5_GPIO_Z4,
+ EXYNOS5_GPIO_Z5,
+ EXYNOS5_GPIO_Z6,
+ EXYNOS5_GPIO_MAX_PORT
};
-struct exynos4x12_gpio_part4 {
- struct s5p_gpio_bank v0;
- struct s5p_gpio_bank v1;
- struct s5p_gpio_bank res1[0x1];
- struct s5p_gpio_bank v2;
- struct s5p_gpio_bank v3;
- struct s5p_gpio_bank res2[0x1];
- struct s5p_gpio_bank v4;
+enum exynos5420_gpio_pin {
+ /* GPIO_PART1_STARTS */
+ EXYNOS5420_GPIO_A00, /* 0 */
+ EXYNOS5420_GPIO_A01,
+ EXYNOS5420_GPIO_A02,
+ EXYNOS5420_GPIO_A03,
+ EXYNOS5420_GPIO_A04,
+ EXYNOS5420_GPIO_A05,
+ EXYNOS5420_GPIO_A06,
+ EXYNOS5420_GPIO_A07,
+ EXYNOS5420_GPIO_A10, /* 8 */
+ EXYNOS5420_GPIO_A11,
+ EXYNOS5420_GPIO_A12,
+ EXYNOS5420_GPIO_A13,
+ EXYNOS5420_GPIO_A14,
+ EXYNOS5420_GPIO_A15,
+ EXYNOS5420_GPIO_A16,
+ EXYNOS5420_GPIO_A17,
+ EXYNOS5420_GPIO_A20, /* 16 0x10 */
+ EXYNOS5420_GPIO_A21,
+ EXYNOS5420_GPIO_A22,
+ EXYNOS5420_GPIO_A23,
+ EXYNOS5420_GPIO_A24,
+ EXYNOS5420_GPIO_A25,
+ EXYNOS5420_GPIO_A26,
+ EXYNOS5420_GPIO_A27,
+ EXYNOS5420_GPIO_B00, /* 24 0x18 */
+ EXYNOS5420_GPIO_B01,
+ EXYNOS5420_GPIO_B02,
+ EXYNOS5420_GPIO_B03,
+ EXYNOS5420_GPIO_B04,
+ EXYNOS5420_GPIO_B05,
+ EXYNOS5420_GPIO_B06,
+ EXYNOS5420_GPIO_B07,
+ EXYNOS5420_GPIO_B10, /* 32 0x20 */
+ EXYNOS5420_GPIO_B11,
+ EXYNOS5420_GPIO_B12,
+ EXYNOS5420_GPIO_B13,
+ EXYNOS5420_GPIO_B14,
+ EXYNOS5420_GPIO_B15,
+ EXYNOS5420_GPIO_B16,
+ EXYNOS5420_GPIO_B17,
+ EXYNOS5420_GPIO_B20, /* 40 0x28 */
+ EXYNOS5420_GPIO_B21,
+ EXYNOS5420_GPIO_B22,
+ EXYNOS5420_GPIO_B23,
+ EXYNOS5420_GPIO_B24,
+ EXYNOS5420_GPIO_B25,
+ EXYNOS5420_GPIO_B26,
+ EXYNOS5420_GPIO_B27,
+ EXYNOS5420_GPIO_B30, /* 48 0x30 */
+ EXYNOS5420_GPIO_B31,
+ EXYNOS5420_GPIO_B32,
+ EXYNOS5420_GPIO_B33,
+ EXYNOS5420_GPIO_B34,
+ EXYNOS5420_GPIO_B35,
+ EXYNOS5420_GPIO_B36,
+ EXYNOS5420_GPIO_B37,
+ EXYNOS5420_GPIO_B40, /* 56 0x38 */
+ EXYNOS5420_GPIO_B41,
+ EXYNOS5420_GPIO_B42,
+ EXYNOS5420_GPIO_B43,
+ EXYNOS5420_GPIO_B44,
+ EXYNOS5420_GPIO_B45,
+ EXYNOS5420_GPIO_B46,
+ EXYNOS5420_GPIO_B47,
+ EXYNOS5420_GPIO_H00, /* 64 0x40 */
+ EXYNOS5420_GPIO_H01,
+ EXYNOS5420_GPIO_H02,
+ EXYNOS5420_GPIO_H03,
+ EXYNOS5420_GPIO_H04,
+ EXYNOS5420_GPIO_H05,
+ EXYNOS5420_GPIO_H06,
+ EXYNOS5420_GPIO_H07,
+
+ /* GPIO PART 2 STARTS*/
+ EXYNOS5420_GPIO_MAX_PORT_PART_1,/* 72 0x48 */
+ EXYNOS5420_GPIO_Y70 = EXYNOS5420_GPIO_MAX_PORT_PART_1,
+ EXYNOS5420_GPIO_Y71,
+ EXYNOS5420_GPIO_Y72,
+ EXYNOS5420_GPIO_Y73,
+ EXYNOS5420_GPIO_Y74,
+ EXYNOS5420_GPIO_Y75,
+ EXYNOS5420_GPIO_Y76,
+ EXYNOS5420_GPIO_Y77,
+
+ /* GPIO PART 3 STARTS*/
+ EXYNOS5420_GPIO_MAX_PORT_PART_2,/* 80 0x50 */
+ EXYNOS5420_GPIO_X00 = EXYNOS5420_GPIO_MAX_PORT_PART_2,
+ EXYNOS5420_GPIO_X01,
+ EXYNOS5420_GPIO_X02,
+ EXYNOS5420_GPIO_X03,
+ EXYNOS5420_GPIO_X04,
+ EXYNOS5420_GPIO_X05,
+ EXYNOS5420_GPIO_X06,
+ EXYNOS5420_GPIO_X07,
+ EXYNOS5420_GPIO_X10, /* 88 0x58 */
+ EXYNOS5420_GPIO_X11,
+ EXYNOS5420_GPIO_X12,
+ EXYNOS5420_GPIO_X13,
+ EXYNOS5420_GPIO_X14,
+ EXYNOS5420_GPIO_X15,
+ EXYNOS5420_GPIO_X16,
+ EXYNOS5420_GPIO_X17,
+ EXYNOS5420_GPIO_X20, /* 96 0x60 */
+ EXYNOS5420_GPIO_X21,
+ EXYNOS5420_GPIO_X22,
+ EXYNOS5420_GPIO_X23,
+ EXYNOS5420_GPIO_X24,
+ EXYNOS5420_GPIO_X25,
+ EXYNOS5420_GPIO_X26,
+ EXYNOS5420_GPIO_X27,
+ EXYNOS5420_GPIO_X30, /* 104 0x68 */
+ EXYNOS5420_GPIO_X31,
+ EXYNOS5420_GPIO_X32,
+ EXYNOS5420_GPIO_X33,
+ EXYNOS5420_GPIO_X34,
+ EXYNOS5420_GPIO_X35,
+ EXYNOS5420_GPIO_X36,
+ EXYNOS5420_GPIO_X37,
+
+ /* GPIO PART 4 STARTS*/
+ EXYNOS5420_GPIO_MAX_PORT_PART_3,/* 112 0x70 */
+ EXYNOS5420_GPIO_C00 = EXYNOS5420_GPIO_MAX_PORT_PART_3,
+ EXYNOS5420_GPIO_C01,
+ EXYNOS5420_GPIO_C02,
+ EXYNOS5420_GPIO_C03,
+ EXYNOS5420_GPIO_C04,
+ EXYNOS5420_GPIO_C05,
+ EXYNOS5420_GPIO_C06,
+ EXYNOS5420_GPIO_C07,
+ EXYNOS5420_GPIO_C10, /* 120 0x78 */
+ EXYNOS5420_GPIO_C11,
+ EXYNOS5420_GPIO_C12,
+ EXYNOS5420_GPIO_C13,
+ EXYNOS5420_GPIO_C14,
+ EXYNOS5420_GPIO_C15,
+ EXYNOS5420_GPIO_C16,
+ EXYNOS5420_GPIO_C17,
+ EXYNOS5420_GPIO_C20, /* 128 0x80 */
+ EXYNOS5420_GPIO_C21,
+ EXYNOS5420_GPIO_C22,
+ EXYNOS5420_GPIO_C23,
+ EXYNOS5420_GPIO_C24,
+ EXYNOS5420_GPIO_C25,
+ EXYNOS5420_GPIO_C26,
+ EXYNOS5420_GPIO_C27,
+ EXYNOS5420_GPIO_C30, /* 136 0x88 */
+ EXYNOS5420_GPIO_C31,
+ EXYNOS5420_GPIO_C32,
+ EXYNOS5420_GPIO_C33,
+ EXYNOS5420_GPIO_C34,
+ EXYNOS5420_GPIO_C35,
+ EXYNOS5420_GPIO_C36,
+ EXYNOS5420_GPIO_C37,
+ EXYNOS5420_GPIO_C40, /* 144 0x90 */
+ EXYNOS5420_GPIO_C41,
+ EXYNOS5420_GPIO_C42,
+ EXYNOS5420_GPIO_C43,
+ EXYNOS5420_GPIO_C44,
+ EXYNOS5420_GPIO_C45,
+ EXYNOS5420_GPIO_C46,
+ EXYNOS5420_GPIO_C47,
+ EXYNOS5420_GPIO_D10, /* 152 0x98 */
+ EXYNOS5420_GPIO_D11,
+ EXYNOS5420_GPIO_D12,
+ EXYNOS5420_GPIO_D13,
+ EXYNOS5420_GPIO_D14,
+ EXYNOS5420_GPIO_D15,
+ EXYNOS5420_GPIO_D16,
+ EXYNOS5420_GPIO_D17,
+ EXYNOS5420_GPIO_Y00, /* 160 0xa0 */
+ EXYNOS5420_GPIO_Y01,
+ EXYNOS5420_GPIO_Y02,
+ EXYNOS5420_GPIO_Y03,
+ EXYNOS5420_GPIO_Y04,
+ EXYNOS5420_GPIO_Y05,
+ EXYNOS5420_GPIO_Y06,
+ EXYNOS5420_GPIO_Y07,
+ EXYNOS5420_GPIO_Y10, /* 168 0xa8 */
+ EXYNOS5420_GPIO_Y11,
+ EXYNOS5420_GPIO_Y12,
+ EXYNOS5420_GPIO_Y13,
+ EXYNOS5420_GPIO_Y14,
+ EXYNOS5420_GPIO_Y15,
+ EXYNOS5420_GPIO_Y16,
+ EXYNOS5420_GPIO_Y17,
+ EXYNOS5420_GPIO_Y20, /* 176 0xb0 */
+ EXYNOS5420_GPIO_Y21,
+ EXYNOS5420_GPIO_Y22,
+ EXYNOS5420_GPIO_Y23,
+ EXYNOS5420_GPIO_Y24,
+ EXYNOS5420_GPIO_Y25,
+ EXYNOS5420_GPIO_Y26,
+ EXYNOS5420_GPIO_Y27,
+ EXYNOS5420_GPIO_Y30, /* 184 0xb8 */
+ EXYNOS5420_GPIO_Y31,
+ EXYNOS5420_GPIO_Y32,
+ EXYNOS5420_GPIO_Y33,
+ EXYNOS5420_GPIO_Y34,
+ EXYNOS5420_GPIO_Y35,
+ EXYNOS5420_GPIO_Y36,
+ EXYNOS5420_GPIO_Y37,
+ EXYNOS5420_GPIO_Y40, /* 192 0xc0 */
+ EXYNOS5420_GPIO_Y41,
+ EXYNOS5420_GPIO_Y42,
+ EXYNOS5420_GPIO_Y43,
+ EXYNOS5420_GPIO_Y44,
+ EXYNOS5420_GPIO_Y45,
+ EXYNOS5420_GPIO_Y46,
+ EXYNOS5420_GPIO_Y47,
+ EXYNOS5420_GPIO_Y50, /* 200 0xc8 */
+ EXYNOS5420_GPIO_Y51,
+ EXYNOS5420_GPIO_Y52,
+ EXYNOS5420_GPIO_Y53,
+ EXYNOS5420_GPIO_Y54,
+ EXYNOS5420_GPIO_Y55,
+ EXYNOS5420_GPIO_Y56,
+ EXYNOS5420_GPIO_Y57,
+ EXYNOS5420_GPIO_Y60, /* 208 0xd0 */
+ EXYNOS5420_GPIO_Y61,
+ EXYNOS5420_GPIO_Y62,
+ EXYNOS5420_GPIO_Y63,
+ EXYNOS5420_GPIO_Y64,
+ EXYNOS5420_GPIO_Y65,
+ EXYNOS5420_GPIO_Y66,
+ EXYNOS5420_GPIO_Y67,
+
+ /* GPIO_PART5_STARTS */
+ EXYNOS5420_GPIO_MAX_PORT_PART_4,/* 216 0xd8 */
+ EXYNOS5420_GPIO_E00 = EXYNOS5420_GPIO_MAX_PORT_PART_4,
+ EXYNOS5420_GPIO_E01,
+ EXYNOS5420_GPIO_E02,
+ EXYNOS5420_GPIO_E03,
+ EXYNOS5420_GPIO_E04,
+ EXYNOS5420_GPIO_E05,
+ EXYNOS5420_GPIO_E06,
+ EXYNOS5420_GPIO_E07,
+ EXYNOS5420_GPIO_E10, /* 224 0xe0 */
+ EXYNOS5420_GPIO_E11,
+ EXYNOS5420_GPIO_E12,
+ EXYNOS5420_GPIO_E13,
+ EXYNOS5420_GPIO_E14,
+ EXYNOS5420_GPIO_E15,
+ EXYNOS5420_GPIO_E16,
+ EXYNOS5420_GPIO_E17,
+ EXYNOS5420_GPIO_F00, /* 232 0xe8 */
+ EXYNOS5420_GPIO_F01,
+ EXYNOS5420_GPIO_F02,
+ EXYNOS5420_GPIO_F03,
+ EXYNOS5420_GPIO_F04,
+ EXYNOS5420_GPIO_F05,
+ EXYNOS5420_GPIO_F06,
+ EXYNOS5420_GPIO_F07,
+ EXYNOS5420_GPIO_F10, /* 240 0xf0 */
+ EXYNOS5420_GPIO_F11,
+ EXYNOS5420_GPIO_F12,
+ EXYNOS5420_GPIO_F13,
+ EXYNOS5420_GPIO_F14,
+ EXYNOS5420_GPIO_F15,
+ EXYNOS5420_GPIO_F16,
+ EXYNOS5420_GPIO_F17,
+ EXYNOS5420_GPIO_G00, /* 248 0xf8 */
+ EXYNOS5420_GPIO_G01,
+ EXYNOS5420_GPIO_G02,
+ EXYNOS5420_GPIO_G03,
+ EXYNOS5420_GPIO_G04,
+ EXYNOS5420_GPIO_G05,
+ EXYNOS5420_GPIO_G06,
+ EXYNOS5420_GPIO_G07,
+ EXYNOS5420_GPIO_G10, /* 256 0x100 */
+ EXYNOS5420_GPIO_G11,
+ EXYNOS5420_GPIO_G12,
+ EXYNOS5420_GPIO_G13,
+ EXYNOS5420_GPIO_G14,
+ EXYNOS5420_GPIO_G15,
+ EXYNOS5420_GPIO_G16,
+ EXYNOS5420_GPIO_G17,
+ EXYNOS5420_GPIO_G20, /* 264 0x108 */
+ EXYNOS5420_GPIO_G21,
+ EXYNOS5420_GPIO_G22,
+ EXYNOS5420_GPIO_G23,
+ EXYNOS5420_GPIO_G24,
+ EXYNOS5420_GPIO_G25,
+ EXYNOS5420_GPIO_G26,
+ EXYNOS5420_GPIO_G27,
+ EXYNOS5420_GPIO_J40, /* 272 0x110 */
+ EXYNOS5420_GPIO_J41,
+ EXYNOS5420_GPIO_J42,
+ EXYNOS5420_GPIO_J43,
+ EXYNOS5420_GPIO_J44,
+ EXYNOS5420_GPIO_J45,
+ EXYNOS5420_GPIO_J46,
+ EXYNOS5420_GPIO_J47,
+
+ /* GPIO_PART6_STARTS */
+ EXYNOS5420_GPIO_MAX_PORT_PART_5,/* 280 0x118 */
+ EXYNOS5420_GPIO_Z0 = EXYNOS5420_GPIO_MAX_PORT_PART_5,
+ EXYNOS5420_GPIO_Z1,
+ EXYNOS5420_GPIO_Z2,
+ EXYNOS5420_GPIO_Z3,
+ EXYNOS5420_GPIO_Z4,
+ EXYNOS5420_GPIO_Z5,
+ EXYNOS5420_GPIO_Z6,
+ EXYNOS5420_GPIO_MAX_PORT
};
-struct exynos5420_gpio_part1 {
- struct s5p_gpio_bank a0;
- struct s5p_gpio_bank a1;
- struct s5p_gpio_bank a2;
- struct s5p_gpio_bank b0;
- struct s5p_gpio_bank b1;
- struct s5p_gpio_bank b2;
- struct s5p_gpio_bank b3;
- struct s5p_gpio_bank b4;
- struct s5p_gpio_bank h0;
+struct gpio_info {
+ unsigned int reg_addr; /* Address of register for this part */
+ unsigned int max_gpio; /* Maximum GPIO in this part */
};
-struct exynos5420_gpio_part2 {
- struct s5p_gpio_bank y7; /* 0x1340_0000 */
- struct s5p_gpio_bank res[0x5f]; /* */
- struct s5p_gpio_bank x0; /* 0x1340_0C00 */
- struct s5p_gpio_bank x1; /* 0x1340_0C20 */
- struct s5p_gpio_bank x2; /* 0x1340_0C40 */
- struct s5p_gpio_bank x3; /* 0x1340_0C60 */
+#define EXYNOS4_GPIO_NUM_PARTS 3
+static struct gpio_info exynos4_gpio_data[EXYNOS4_GPIO_NUM_PARTS] = {
+ { EXYNOS4_GPIO_PART1_BASE, EXYNOS4_GPIO_MAX_PORT_PART_1 },
+ { EXYNOS4_GPIO_PART2_BASE, EXYNOS4_GPIO_MAX_PORT_PART_2 },
+ { EXYNOS4_GPIO_PART3_BASE, EXYNOS4_GPIO_MAX_PORT },
};
-struct exynos5420_gpio_part3 {
- struct s5p_gpio_bank c0;
- struct s5p_gpio_bank c1;
- struct s5p_gpio_bank c2;
- struct s5p_gpio_bank c3;
- struct s5p_gpio_bank c4;
- struct s5p_gpio_bank d1;
- struct s5p_gpio_bank y0;
- struct s5p_gpio_bank y1;
- struct s5p_gpio_bank y2;
- struct s5p_gpio_bank y3;
- struct s5p_gpio_bank y4;
- struct s5p_gpio_bank y5;
- struct s5p_gpio_bank y6;
+#define EXYNOS4X12_GPIO_NUM_PARTS 4
+static struct gpio_info exynos4x12_gpio_data[EXYNOS4X12_GPIO_NUM_PARTS] = {
+ { EXYNOS4X12_GPIO_PART1_BASE, EXYNOS4X12_GPIO_MAX_PORT_PART_1 },
+ { EXYNOS4X12_GPIO_PART2_BASE, EXYNOS4X12_GPIO_MAX_PORT_PART_2 },
+ { EXYNOS4X12_GPIO_PART3_BASE, EXYNOS4X12_GPIO_MAX_PORT_PART_3 },
+ { EXYNOS4X12_GPIO_PART4_BASE, EXYNOS4X12_GPIO_MAX_PORT },
};
-struct exynos5420_gpio_part4 {
- struct s5p_gpio_bank e0; /* 0x1400_0000 */
- struct s5p_gpio_bank e1; /* 0x1400_0020 */
- struct s5p_gpio_bank f0; /* 0x1400_0040 */
- struct s5p_gpio_bank f1; /* 0x1400_0060 */
- struct s5p_gpio_bank g0; /* 0x1400_0080 */
- struct s5p_gpio_bank g1; /* 0x1400_00A0 */
- struct s5p_gpio_bank g2; /* 0x1400_00C0 */
- struct s5p_gpio_bank j4; /* 0x1400_00E0 */
+#define EXYNOS5_GPIO_NUM_PARTS 8
+static struct gpio_info exynos5_gpio_data[EXYNOS5_GPIO_NUM_PARTS] = {
+ { EXYNOS5_GPIO_PART1_BASE, EXYNOS5_GPIO_MAX_PORT_PART_1 },
+ { EXYNOS5_GPIO_PART2_BASE, EXYNOS5_GPIO_MAX_PORT_PART_2 },
+ { EXYNOS5_GPIO_PART3_BASE, EXYNOS5_GPIO_MAX_PORT_PART_3 },
+ { EXYNOS5_GPIO_PART4_BASE, EXYNOS5_GPIO_MAX_PORT_PART_4 },
+ { EXYNOS5_GPIO_PART5_BASE, EXYNOS5_GPIO_MAX_PORT_PART_5 },
+ { EXYNOS5_GPIO_PART6_BASE, EXYNOS5_GPIO_MAX_PORT_PART_6 },
+ { EXYNOS5_GPIO_PART7_BASE, EXYNOS5_GPIO_MAX_PORT_PART_7 },
+ { EXYNOS5_GPIO_PART8_BASE, EXYNOS5_GPIO_MAX_PORT },
};
-struct exynos5420_gpio_part5 {
- struct s5p_gpio_bank z0; /* 0x0386_0000 */
+#define EXYNOS5420_GPIO_NUM_PARTS 6
+static struct gpio_info exynos5420_gpio_data[EXYNOS5420_GPIO_NUM_PARTS] = {
+ { EXYNOS5420_GPIO_PART1_BASE, EXYNOS5420_GPIO_MAX_PORT_PART_1 },
+ { EXYNOS5420_GPIO_PART2_BASE, EXYNOS5420_GPIO_MAX_PORT_PART_2 },
+ { EXYNOS5420_GPIO_PART3_BASE, EXYNOS5420_GPIO_MAX_PORT_PART_3 },
+ { EXYNOS5420_GPIO_PART4_BASE, EXYNOS5420_GPIO_MAX_PORT_PART_4 },
+ { EXYNOS5420_GPIO_PART5_BASE, EXYNOS5420_GPIO_MAX_PORT_PART_5 },
+ { EXYNOS5420_GPIO_PART6_BASE, EXYNOS5420_GPIO_MAX_PORT },
};
-struct exynos5_gpio_part1 {
- struct s5p_gpio_bank a0;
- struct s5p_gpio_bank a1;
- struct s5p_gpio_bank a2;
- struct s5p_gpio_bank b0;
- struct s5p_gpio_bank b1;
- struct s5p_gpio_bank b2;
- struct s5p_gpio_bank b3;
- struct s5p_gpio_bank c0;
- struct s5p_gpio_bank c1;
- struct s5p_gpio_bank c2;
- struct s5p_gpio_bank c3;
- struct s5p_gpio_bank d0;
- struct s5p_gpio_bank d1;
- struct s5p_gpio_bank y0;
- struct s5p_gpio_bank y1;
- struct s5p_gpio_bank y2;
- struct s5p_gpio_bank y3;
- struct s5p_gpio_bank y4;
- struct s5p_gpio_bank y5;
- struct s5p_gpio_bank y6;
- struct s5p_gpio_bank res1[0x3];
- struct s5p_gpio_bank c4;
- struct s5p_gpio_bank res2[0x48];
- struct s5p_gpio_bank x0;
- struct s5p_gpio_bank x1;
- struct s5p_gpio_bank x2;
- struct s5p_gpio_bank x3;
+static inline struct gpio_info *get_gpio_data(void)
+{
+ if (cpu_is_exynos5()) {
+ if (proid_is_exynos5420())
+ return exynos5420_gpio_data;
+ else
+ return exynos5_gpio_data;
+ } else if (cpu_is_exynos4()) {
+ if (proid_is_exynos4412())
+ return exynos4x12_gpio_data;
+ else
+ return exynos4_gpio_data;
+ }
+
+ return NULL;
+}
+
+static inline unsigned int get_bank_num(void)
+{
+ if (cpu_is_exynos5()) {
+ if (proid_is_exynos5420())
+ return EXYNOS5420_GPIO_NUM_PARTS;
+ else
+ return EXYNOS5_GPIO_NUM_PARTS;
+ } else if (cpu_is_exynos4()) {
+ if (proid_is_exynos4412())
+ return EXYNOS4X12_GPIO_NUM_PARTS;
+ else
+ return EXYNOS4_GPIO_NUM_PARTS;
+ }
+
+ return 0;
+}
+
+/*
+ * This structure helps mapping symbolic GPIO names into indices from
+ * exynos5_gpio_pin/exynos5420_gpio_pin enums.
+ *
+ * By convention, symbolic GPIO name is defined as follows:
+ *
+ * g[p]<bank><set><bit>, where
+ * p is optional
+ * <bank> - a single character bank name, as defined by the SOC
+ * <set> - a single digit set number
+ * <bit> - bit number within the set (in 0..7 range).
+ *
+ * <set><bit> essentially form an octal number of the GPIO pin within the bank
+ * space. On the 5420 architecture some banks' sets do not start not from zero
+ * ('d' starts from 1 and 'j' starts from 4). To compensate for that and
+ * maintain flat number space withoout holes, those banks use offsets to be
+ * deducted from the pin number.
+ */
+struct gpio_name_num_table {
+ char bank; /* bank name symbol */
+ unsigned int bank_size; /* total number of pins in the bank */
+ char bank_offset; /* offset of the first bank's pin */
+ unsigned int base; /* index of the first bank's pin in the enum */
};
-struct exynos5_gpio_part2 {
- struct s5p_gpio_bank e0;
- struct s5p_gpio_bank e1;
- struct s5p_gpio_bank f0;
- struct s5p_gpio_bank f1;
- struct s5p_gpio_bank g0;
- struct s5p_gpio_bank g1;
- struct s5p_gpio_bank g2;
- struct s5p_gpio_bank h0;
- struct s5p_gpio_bank h1;
+#define GPIO_ENTRY(name, base, top, offset) { name, top - base, offset, base }
+static const struct gpio_name_num_table exynos4_gpio_table[] = {
+ GPIO_ENTRY('a', EXYNOS4_GPIO_A00, EXYNOS4_GPIO_B0, 0),
+ GPIO_ENTRY('b', EXYNOS4_GPIO_B0, EXYNOS4_GPIO_C00, 0),
+ GPIO_ENTRY('c', EXYNOS4_GPIO_C00, EXYNOS4_GPIO_D00, 0),
+ GPIO_ENTRY('d', EXYNOS4_GPIO_D00, EXYNOS4_GPIO_E00, 0),
+ GPIO_ENTRY('e', EXYNOS4_GPIO_E00, EXYNOS4_GPIO_F00, 0),
+ GPIO_ENTRY('f', EXYNOS4_GPIO_F00, EXYNOS4_GPIO_J00, 0),
+ GPIO_ENTRY('j', EXYNOS4_GPIO_J00, EXYNOS4_GPIO_K00, 0),
+ GPIO_ENTRY('k', EXYNOS4_GPIO_K00, EXYNOS4_GPIO_L00, 0),
+ GPIO_ENTRY('l', EXYNOS4_GPIO_L00, EXYNOS4_GPIO_Y00, 0),
+ GPIO_ENTRY('y', EXYNOS4_GPIO_Y00, EXYNOS4_GPIO_X00, 0),
+ GPIO_ENTRY('x', EXYNOS4_GPIO_X00, EXYNOS4_GPIO_Z0, 0),
+ GPIO_ENTRY('z', EXYNOS4_GPIO_Z0, EXYNOS4_GPIO_MAX_PORT, 0),
+ { 0 }
};
-struct exynos5_gpio_part3 {
- struct s5p_gpio_bank v0;
- struct s5p_gpio_bank v1;
- struct s5p_gpio_bank res1[0x1];
- struct s5p_gpio_bank v2;
- struct s5p_gpio_bank v3;
- struct s5p_gpio_bank res2[0x1];
- struct s5p_gpio_bank v4;
+static const struct gpio_name_num_table exynos4x12_gpio_table[] = {
+ GPIO_ENTRY('a', EXYNOS4X12_GPIO_A00, EXYNOS4X12_GPIO_B0, 0),
+ GPIO_ENTRY('b', EXYNOS4X12_GPIO_B0, EXYNOS4X12_GPIO_C00, 0),
+ GPIO_ENTRY('c', EXYNOS4X12_GPIO_C00, EXYNOS4X12_GPIO_D00, 0),
+ GPIO_ENTRY('d', EXYNOS4X12_GPIO_D00, EXYNOS4X12_GPIO_F00, 0),
+ GPIO_ENTRY('f', EXYNOS4X12_GPIO_F00, EXYNOS4X12_GPIO_J00, 0),
+ GPIO_ENTRY('j', EXYNOS4X12_GPIO_J00, EXYNOS4X12_GPIO_K00, 0),
+ GPIO_ENTRY('k', EXYNOS4X12_GPIO_K00, EXYNOS4X12_GPIO_L00, 0),
+ GPIO_ENTRY('l', EXYNOS4X12_GPIO_L00, EXYNOS4X12_GPIO_Y00, 0),
+ GPIO_ENTRY('y', EXYNOS4X12_GPIO_Y00, EXYNOS4X12_GPIO_M00, 0),
+ GPIO_ENTRY('m', EXYNOS4X12_GPIO_M00, EXYNOS4X12_GPIO_X00, 0),
+ GPIO_ENTRY('x', EXYNOS4X12_GPIO_X00, EXYNOS4X12_GPIO_Z0, 0),
+ GPIO_ENTRY('z', EXYNOS4X12_GPIO_Z0, EXYNOS4X12_GPIO_V00, 0),
+ GPIO_ENTRY('v', EXYNOS4X12_GPIO_V00, EXYNOS4X12_GPIO_MAX_PORT, 0),
+ { 0 }
};
-struct exynos5_gpio_part4 {
- struct s5p_gpio_bank z;
+static const struct gpio_name_num_table exynos5_gpio_table[] = {
+ GPIO_ENTRY('a', EXYNOS5_GPIO_A00, EXYNOS5_GPIO_B00, 0),
+ GPIO_ENTRY('b', EXYNOS5_GPIO_B00, EXYNOS5_GPIO_C00, 0),
+ GPIO_ENTRY('c', EXYNOS5_GPIO_C00, EXYNOS5_GPIO_D00, 0),
+ GPIO_ENTRY('d', EXYNOS5_GPIO_D00, EXYNOS5_GPIO_Y00, 0),
+ GPIO_ENTRY('y', EXYNOS5_GPIO_Y00, EXYNOS5_GPIO_C40, 0),
+ GPIO_ENTRY('x', EXYNOS5_GPIO_X00, EXYNOS5_GPIO_E00, 0),
+ GPIO_ENTRY('e', EXYNOS5_GPIO_E00, EXYNOS5_GPIO_F00, 0),
+ GPIO_ENTRY('f', EXYNOS5_GPIO_F00, EXYNOS5_GPIO_G00, 0),
+ GPIO_ENTRY('g', EXYNOS5_GPIO_G00, EXYNOS5_GPIO_H00, 0),
+ GPIO_ENTRY('h', EXYNOS5_GPIO_H00, EXYNOS5_GPIO_V00, 0),
+ GPIO_ENTRY('v', EXYNOS5_GPIO_V00, EXYNOS5_GPIO_Z0, 0),
+ GPIO_ENTRY('z', EXYNOS5_GPIO_Z0, EXYNOS5_GPIO_MAX_PORT, 0),
+ { 0 }
};
-/* functions */
-void s5p_gpio_cfg_pin(struct s5p_gpio_bank *bank, int gpio, int cfg);
-void s5p_gpio_direction_output(struct s5p_gpio_bank *bank, int gpio, int en);
-void s5p_gpio_direction_input(struct s5p_gpio_bank *bank, int gpio);
-void s5p_gpio_set_value(struct s5p_gpio_bank *bank, int gpio, int en);
-unsigned int s5p_gpio_get_value(struct s5p_gpio_bank *bank, int gpio);
-void s5p_gpio_set_pull(struct s5p_gpio_bank *bank, int gpio, int mode);
-void s5p_gpio_set_drv(struct s5p_gpio_bank *bank, int gpio, int mode);
-void s5p_gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode);
+static const struct gpio_name_num_table exynos5420_gpio_table[] = {
+ GPIO_ENTRY('a', EXYNOS5420_GPIO_A00, EXYNOS5420_GPIO_B00, 0),
+ GPIO_ENTRY('b', EXYNOS5420_GPIO_B00, EXYNOS5420_GPIO_H00, 0),
+ GPIO_ENTRY('h', EXYNOS5420_GPIO_H00, EXYNOS5420_GPIO_Y70, 0),
+ GPIO_ENTRY('x', EXYNOS5420_GPIO_X00, EXYNOS5420_GPIO_C00, 0),
+ GPIO_ENTRY('c', EXYNOS5420_GPIO_C00, EXYNOS5420_GPIO_D10, 0),
+ GPIO_ENTRY('d', EXYNOS5420_GPIO_D10, EXYNOS5420_GPIO_Y00, 010),
+ GPIO_ENTRY('y', EXYNOS5420_GPIO_Y00, EXYNOS5420_GPIO_E00, 0),
+ GPIO_ENTRY('e', EXYNOS5420_GPIO_E00, EXYNOS5420_GPIO_F00, 0),
+ GPIO_ENTRY('f', EXYNOS5420_GPIO_F00, EXYNOS5420_GPIO_G00, 0),
+ GPIO_ENTRY('g', EXYNOS5420_GPIO_G00, EXYNOS5420_GPIO_J40, 0),
+ GPIO_ENTRY('j', EXYNOS5420_GPIO_J40, EXYNOS5420_GPIO_Z0, 040),
+ GPIO_ENTRY('z', EXYNOS5420_GPIO_Z0, EXYNOS5420_GPIO_MAX_PORT, 0),
+ { 0 }
+};
-/* GPIO pins per bank */
-#define GPIO_PER_BANK 8
-#define S5P_GPIO_PART_SHIFT (24)
-#define S5P_GPIO_PART_MASK (0xff)
-#define S5P_GPIO_BANK_SHIFT (8)
-#define S5P_GPIO_BANK_MASK (0xffff)
-#define S5P_GPIO_PIN_MASK (0xff)
-
-#define S5P_GPIO_SET_PART(x) \
- (((x) & S5P_GPIO_PART_MASK) << S5P_GPIO_PART_SHIFT)
-
-#define S5P_GPIO_GET_PART(x) \
- (((x) >> S5P_GPIO_PART_SHIFT) & S5P_GPIO_PART_MASK)
-
-#define S5P_GPIO_SET_PIN(x) \
- ((x) & S5P_GPIO_PIN_MASK)
-
-#define EXYNOS4_GPIO_SET_BANK(part, bank) \
- ((((unsigned)&(((struct exynos4_gpio_part##part *) \
- EXYNOS4_GPIO_PART##part##_BASE)->bank) \
- - EXYNOS4_GPIO_PART##part##_BASE) \
- & S5P_GPIO_BANK_MASK) << S5P_GPIO_BANK_SHIFT)
-
-#define EXYNOS4X12_GPIO_SET_BANK(part, bank) \
- ((((unsigned)&(((struct exynos4x12_gpio_part##part *) \
- EXYNOS4X12_GPIO_PART##part##_BASE)->bank) \
- - EXYNOS4X12_GPIO_PART##part##_BASE) \
- & S5P_GPIO_BANK_MASK) << S5P_GPIO_BANK_SHIFT)
-
-#define EXYNOS5_GPIO_SET_BANK(part, bank) \
- ((((unsigned)&(((struct exynos5420_gpio_part##part *) \
- EXYNOS5420_GPIO_PART##part##_BASE)->bank) \
- - EXYNOS5_GPIO_PART##part##_BASE) \
- & S5P_GPIO_BANK_MASK) << S5P_GPIO_BANK_SHIFT)
-
-#define EXYNOS5420_GPIO_SET_BANK(part, bank) \
- ((((unsigned)&(((struct exynos5420_gpio_part##part *) \
- EXYNOS5420_GPIO_PART##part##_BASE)->bank) \
- - EXYNOS5420_GPIO_PART##part##_BASE) \
- & S5P_GPIO_BANK_MASK) << S5P_GPIO_BANK_SHIFT)
-
-#define exynos4_gpio_get(part, bank, pin) \
- (S5P_GPIO_SET_PART(part) | \
- EXYNOS4_GPIO_SET_BANK(part, bank) | \
- S5P_GPIO_SET_PIN(pin))
-
-#define exynos4x12_gpio_get(part, bank, pin) \
- (S5P_GPIO_SET_PART(part) | \
- EXYNOS4X12_GPIO_SET_BANK(part, bank) | \
- S5P_GPIO_SET_PIN(pin))
-
-#define exynos5420_gpio_get(part, bank, pin) \
- (S5P_GPIO_SET_PART(part) | \
- EXYNOS5420_GPIO_SET_BANK(part, bank) | \
- S5P_GPIO_SET_PIN(pin))
-
-#define exynos5_gpio_get(part, bank, pin) \
- (S5P_GPIO_SET_PART(part) | \
- EXYNOS5_GPIO_SET_BANK(part, bank) | \
- S5P_GPIO_SET_PIN(pin))
-
-static inline unsigned int s5p_gpio_base(int gpio)
-{
- unsigned gpio_part = S5P_GPIO_GET_PART(gpio);
-
- switch (gpio_part) {
- case 1:
- return samsung_get_base_gpio_part1();
- case 2:
- return samsung_get_base_gpio_part2();
- case 3:
- return samsung_get_base_gpio_part3();
- case 4:
- return samsung_get_base_gpio_part4();
- default:
- return 0;
- }
-}
+void gpio_cfg_pin(int gpio, int cfg);
+void gpio_set_pull(int gpio, int mode);
+void gpio_set_drv(int gpio, int mode);
+int gpio_direction_output(unsigned gpio, int value);
+int gpio_set_value(unsigned gpio, int value);
+int gpio_get_value(unsigned gpio);
+void gpio_set_rate(int gpio, int mode);
+struct s5p_gpio_bank *s5p_gpio_get_bank(unsigned gpio);
+int s5p_gpio_get_pin(unsigned gpio);
#endif
/* Pin configurations */
-#define GPIO_INPUT 0x0
-#define GPIO_OUTPUT 0x1
-#define GPIO_IRQ 0xf
-#define GPIO_FUNC(x) (x)
+#define S5P_GPIO_INPUT 0x0
+#define S5P_GPIO_OUTPUT 0x1
+#define S5P_GPIO_IRQ 0xf
+#define S5P_GPIO_FUNC(x) (x)
/* Pull mode */
-#define GPIO_PULL_NONE 0x0
-#define GPIO_PULL_DOWN 0x1
-#define GPIO_PULL_UP 0x3
+#define S5P_GPIO_PULL_NONE 0x0
+#define S5P_GPIO_PULL_DOWN 0x1
+#define S5P_GPIO_PULL_UP 0x3
/* Drive Strength level */
-#define GPIO_DRV_1X 0x0
-#define GPIO_DRV_3X 0x1
-#define GPIO_DRV_2X 0x2
-#define GPIO_DRV_4X 0x3
-#define GPIO_DRV_FAST 0x0
-#define GPIO_DRV_SLOW 0x1
+#define S5P_GPIO_DRV_1X 0x0
+#define S5P_GPIO_DRV_3X 0x1
+#define S5P_GPIO_DRV_2X 0x2
+#define S5P_GPIO_DRV_4X 0x3
+#define S5P_GPIO_DRV_FAST 0x0
+#define S5P_GPIO_DRV_SLOW 0x1
#endif
diff --git a/arch/arm/include/asm/arch-mx25/imx-regs.h b/arch/arm/include/asm/arch-mx25/imx-regs.h
index a17f828..3dffa4a 100644
--- a/arch/arm/include/asm/arch-mx25/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx25/imx-regs.h
@@ -161,6 +161,126 @@ struct aips_regs {
u32 mpr_0_7;
u32 mpr_8_15;
};
+/* LCD controller registers */
+struct lcdc_regs {
+ u32 lssar; /* Screen Start Address */
+ u32 lsr; /* Size */
+ u32 lvpwr; /* Virtual Page Width */
+ u32 lcpr; /* Cursor Position */
+ u32 lcwhb; /* Cursor Width Height and Blink */
+ u32 lccmr; /* Color Cursor Mapping */
+ u32 lpcr; /* Panel Configuration */
+ u32 lhcr; /* Horizontal Configuration */
+ u32 lvcr; /* Vertical Configuration */
+ u32 lpor; /* Panning Offset */
+ u32 lscr; /* Sharp Configuration */
+ u32 lpccr; /* PWM Contrast Control */
+ u32 ldcr; /* DMA Control */
+ u32 lrmcr; /* Refresh Mode Control */
+ u32 licr; /* Interrupt Configuration */
+ u32 lier; /* Interrupt Enable */
+ u32 lisr; /* Interrupt Status */
+ u32 res0[3];
+ u32 lgwsar; /* Graphic Window Start Address */
+ u32 lgwsr; /* Graphic Window Size */
+ u32 lgwvpwr; /* Graphic Window Virtual Page Width Regist */
+ u32 lgwpor; /* Graphic Window Panning Offset */
+ u32 lgwpr; /* Graphic Window Position */
+ u32 lgwcr; /* Graphic Window Control */
+ u32 lgwdcr; /* Graphic Window DMA Control */
+ u32 res1[5];
+ u32 lauscr; /* AUS Mode Control */
+ u32 lausccr; /* AUS mode Cursor Control */
+ u32 res2[31 + 64*7];
+ u32 bglut; /* Background Lookup Table */
+ u32 gwlut; /* Graphic Window Lookup Table */
+};
+
+/* Wireless External Interface Module Registers */
+struct weim_regs {
+ u32 cscr0u; /* Chip Select 0 Upper Register */
+ u32 cscr0l; /* Chip Select 0 Lower Register */
+ u32 cscr0a; /* Chip Select 0 Addition Register */
+ u32 pad0;
+ u32 cscr1u; /* Chip Select 1 Upper Register */
+ u32 cscr1l; /* Chip Select 1 Lower Register */
+ u32 cscr1a; /* Chip Select 1 Addition Register */
+ u32 pad1;
+ u32 cscr2u; /* Chip Select 2 Upper Register */
+ u32 cscr2l; /* Chip Select 2 Lower Register */
+ u32 cscr2a; /* Chip Select 2 Addition Register */
+ u32 pad2;
+ u32 cscr3u; /* Chip Select 3 Upper Register */
+ u32 cscr3l; /* Chip Select 3 Lower Register */
+ u32 cscr3a; /* Chip Select 3 Addition Register */
+ u32 pad3;
+ u32 cscr4u; /* Chip Select 4 Upper Register */
+ u32 cscr4l; /* Chip Select 4 Lower Register */
+ u32 cscr4a; /* Chip Select 4 Addition Register */
+ u32 pad4;
+ u32 cscr5u; /* Chip Select 5 Upper Register */
+ u32 cscr5l; /* Chip Select 5 Lower Register */
+ u32 cscr5a; /* Chip Select 5 Addition Register */
+ u32 pad5;
+ u32 wcr; /* WEIM Configuration Register */
+};
+
+/* Multi-Master Memory Interface */
+struct m3if_regs {
+ u32 ctl; /* Control Register */
+ u32 wcfg0; /* Watermark Configuration Register 0 */
+ u32 wcfg1; /* Watermark Configuration Register1 */
+ u32 wcfg2; /* Watermark Configuration Register2 */
+ u32 wcfg3; /* Watermark Configuration Register 3 */
+ u32 wcfg4; /* Watermark Configuration Register 4 */
+ u32 wcfg5; /* Watermark Configuration Register 5 */
+ u32 wcfg6; /* Watermark Configuration Register 6 */
+ u32 wcfg7; /* Watermark Configuration Register 7 */
+ u32 wcsr; /* Watermark Control and Status Register */
+ u32 scfg0; /* Snooping Configuration Register 0 */
+ u32 scfg1; /* Snooping Configuration Register 1 */
+ u32 scfg2; /* Snooping Configuration Register 2 */
+ u32 ssr0; /* Snooping Status Register 0 */
+ u32 ssr1; /* Snooping Status Register 1 */
+ u32 res0;
+ u32 mlwe0; /* Master Lock WEIM CS0 Register */
+ u32 mlwe1; /* Master Lock WEIM CS1 Register */
+ u32 mlwe2; /* Master Lock WEIM CS2 Register */
+ u32 mlwe3; /* Master Lock WEIM CS3 Register */
+ u32 mlwe4; /* Master Lock WEIM CS4 Register */
+ u32 mlwe5; /* Master Lock WEIM CS5 Register */
+};
+
+/* Pulse width modulation */
+struct pwm_regs {
+ u32 cr; /* Control Register */
+ u32 sr; /* Status Register */
+ u32 ir; /* Interrupt Register */
+ u32 sar; /* Sample Register */
+ u32 pr; /* Period Register */
+ u32 cnr; /* Counter Register */
+};
+
+/* Enhanced Periodic Interrupt Timer */
+struct epit_regs {
+ u32 cr; /* Control register */
+ u32 sr; /* Status register */
+ u32 lr; /* Load register */
+ u32 cmpr; /* Compare register */
+ u32 cnr; /* Counter register */
+};
+
+/* CSPI registers */
+struct cspi_regs {
+ u32 rxdata;
+ u32 txdata;
+ u32 ctrl;
+ u32 intr;
+ u32 dma;
+ u32 stat;
+ u32 period;
+ u32 test;
+};
#endif
@@ -289,6 +409,8 @@ struct aips_regs {
#define CCM_PERCLK_MASK 0x3f
#define CCM_RCSR_NF_16BIT_SEL (1 << 14)
#define CCM_RCSR_NF_PS(v) ((v >> 26) & 3)
+#define CCM_CRDR_BT_UART_SRC_SHIFT 29
+#define CCM_CRDR_BT_UART_SRC_MASK 7
/* ESDRAM Controller register bitfields */
#define ESDCTL_PRCT(x) (((x) & 0x3f) << 0)
@@ -345,12 +467,65 @@ struct aips_regs {
#define WSR_UNLOCK1 0x5555
#define WSR_UNLOCK2 0xAAAA
+/* MAX bits */
+#define MAX_MGPCR_AULB(x) (((x) & 0x7) << 0)
+
+/* M3IF bits */
+#define M3IF_CTL_MRRP(x) (((x) & 0xff) << 0)
+
+/* WEIM bits */
+/* 13 fields of the upper CS control register */
+#define WEIM_CSCR_U(sp, wp, bcd, bcs, psz, pme, sync, dol, \
+ cnc, wsc, ew, wws, edc) \
+ ((sp) << 31 | (wp) << 30 | (bcd) << 28 | (bcs) << 24 | \
+ (psz) << 22 | (pme) << 21 | (sync) << 20 | (dol) << 16 | \
+ (cnc) << 14 | (wsc) << 8 | (ew) << 7 | (wws) << 4 | (edc) << 0)
+/* 12 fields of the lower CS control register */
+#define WEIM_CSCR_L(oea, oen, ebwa, ebwn, \
+ csa, ebc, dsz, csn, psr, cre, wrap, csen) \
+ ((oea) << 28 | (oen) << 24 | (ebwa) << 20 | (ebwn) << 16 |\
+ (csa) << 12 | (ebc) << 11 | (dsz) << 8 | (csn) << 4 |\
+ (psr) << 3 | (cre) << 2 | (wrap) << 1 | (csen) << 0)
+/* 14 fields of the additional CS control register */
+#define WEIM_CSCR_A(ebra, ebrn, rwa, rwn, mum, lah, lbn, lba, dww, dct, \
+ wwu, age, cnc2, fce) \
+ ((ebra) << 28 | (ebrn) << 24 | (rwa) << 20 | (rwn) << 16 |\
+ (mum) << 15 | (lah) << 13 | (lbn) << 10 | (lba) << 8 |\
+ (dww) << 6 | (dct) << 4 | (wwu) << 3 |\
+ (age) << 2 | (cnc2) << 1 | (fce) << 0)
+
/* Names used in GPIO driver */
#define GPIO1_BASE_ADDR IMX_GPIO1_BASE
#define GPIO2_BASE_ADDR IMX_GPIO2_BASE
#define GPIO3_BASE_ADDR IMX_GPIO3_BASE
#define GPIO4_BASE_ADDR IMX_GPIO4_BASE
+/*
+ * CSPI register definitions
+ */
+#define MXC_CSPI
+#define MXC_CSPICTRL_EN (1 << 0)
+#define MXC_CSPICTRL_MODE (1 << 1)
+#define MXC_CSPICTRL_XCH (1 << 2)
+#define MXC_CSPICTRL_SMC (1 << 3)
+#define MXC_CSPICTRL_POL (1 << 4)
+#define MXC_CSPICTRL_PHA (1 << 5)
+#define MXC_CSPICTRL_SSCTL (1 << 6)
+#define MXC_CSPICTRL_SSPOL (1 << 7)
+#define MXC_CSPICTRL_CHIPSELECT(x) (((x) & 0x3) << 12)
+#define MXC_CSPICTRL_BITCOUNT(x) (((x) & 0xfff) << 20)
+#define MXC_CSPICTRL_DATARATE(x) (((x) & 0x7) << 16)
+#define MXC_CSPICTRL_TC (1 << 7)
+#define MXC_CSPICTRL_RXOVF (1 << 6)
+#define MXC_CSPICTRL_MAXBITS 0xfff
+#define MXC_CSPIPERIOD_32KHZ (1 << 15)
+#define MAX_SPI_BYTES 4
+
+#define MXC_SPI_BASE_ADDRESSES \
+ IMX_CSPI1_BASE, \
+ IMX_CSPI2_BASE, \
+ IMX_CSPI3_BASE
+
#define CHIP_REV_1_0 0x10
#define CHIP_REV_1_1 0x11
#define CHIP_REV_1_2 0x12
diff --git a/arch/arm/include/asm/arch-mx6/mx6sl_pins.h b/arch/arm/include/asm/arch-mx6/mx6sl_pins.h
index 5f9c90a..045ccc4 100644
--- a/arch/arm/include/asm/arch-mx6/mx6sl_pins.h
+++ b/arch/arm/include/asm/arch-mx6/mx6sl_pins.h
@@ -10,6 +10,10 @@
#include <asm/imx-common/iomux-v3.h>
enum {
+ MX6_PAD_ECSPI1_MISO__ECSPI_MISO = IOMUX_PAD(0x0358, 0x0068, 0, 0x0684, 0, 0),
+ MX6_PAD_ECSPI1_MOSI__ECSPI_MOSI = IOMUX_PAD(0x035C, 0x006C, 0, 0x0688, 0, 0),
+ MX6_PAD_ECSPI1_SCLK__ECSPI_SCLK = IOMUX_PAD(0x0360, 0x0070, 0, 0x067C, 0, 0),
+ MX6_PAD_ECSPI1_SS0__GPIO4_IO11 = IOMUX_PAD(0x0364, 0x0074, 5, 0x0000, 0, 0),
MX6_PAD_SD2_CLK__USDHC2_CLK = IOMUX_PAD(0x055C, 0x0254, 0, 0x0000, 0, 0),
MX6_PAD_SD2_CMD__USDHC2_CMD = IOMUX_PAD(0x0560, 0x0258, 0, 0x0000, 0, 0),
MX6_PAD_SD2_DAT0__USDHC2_DAT0 = IOMUX_PAD(0x0564, 0x025C, 0, 0x0000, 0, 0),
diff --git a/arch/arm/include/asm/arch-omap5/clock.h b/arch/arm/include/asm/arch-omap5/clock.h
index 2dfe4ef..30d9de2 100644
--- a/arch/arm/include/asm/arch-omap5/clock.h
+++ b/arch/arm/include/asm/arch-omap5/clock.h
@@ -322,6 +322,9 @@
#define V_SCLK V_OSCK
+/* CKO buffer control */
+#define CKOBUFFER_CLK_ENABLE_MASK (1 << 28)
+
/* AUXCLKx reg fields */
#define AUXCLK_ENABLE_MASK (1 << 8)
#define AUXCLK_SRCSELECT_SHIFT 1
diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h
index 19fdece..e35a81a 100644
--- a/arch/arm/include/asm/arch-omap5/omap.h
+++ b/arch/arm/include/asm/arch-omap5/omap.h
@@ -50,6 +50,7 @@
#define UART1_BASE (OMAP54XX_L4_PER_BASE + 0x6a000)
#define UART2_BASE (OMAP54XX_L4_PER_BASE + 0x6c000)
#define UART3_BASE (OMAP54XX_L4_PER_BASE + 0x20000)
+#define UART4_BASE (OMAP54XX_L4_PER_BASE + 0x6e000)
/* General Purpose Timers */
#define GPT1_BASE (OMAP54XX_L4_WKUP_BASE + 0x18000)
diff --git a/arch/arm/include/asm/arch-rmobile/r8a7790.h b/arch/arm/include/asm/arch-rmobile/r8a7790.h
index d9ea71f..6ef665d 100644
--- a/arch/arm/include/asm/arch-rmobile/r8a7790.h
+++ b/arch/arm/include/asm/arch-rmobile/r8a7790.h
@@ -1,615 +1,18 @@
/*
* arch/arm/include/asm/arch-rmobile/r8a7790.h
*
- * Copyright (C) 2013 Renesas Electronics Corporation
+ * Copyright (C) 2013,2014 Renesas Electronics Corporation
*
* SPDX-License-Identifier: GPL-2.0
- */
+*/
#ifndef __ASM_ARCH_R8A7790_H
#define __ASM_ARCH_R8A7790_H
-/*
- * R8A7790 I/O Addresses
- */
-#define RWDT_BASE 0xE6020000
-#define SWDT_BASE 0xE6030000
-#define LBSC_BASE 0xFEC00200
-#define DBSC3_0_BASE 0xE6790000
-#define DBSC3_1_BASE 0xE67A0000
-#define TMU_BASE 0xE61E0000
-#define GPIO5_BASE 0xE6055000
-#define SH_QSPI_BASE 0xE6B10000
-
-#define S3C_BASE 0xE6784000
-#define S3C_INT_BASE 0xE6784A00
-#define S3C_MEDIA_BASE 0xE6784B00
-
-#define S3C_QOS_DCACHE_BASE 0xE6784BDC
-#define S3C_QOS_CCI0_BASE 0xE6784C00
-#define S3C_QOS_CCI1_BASE 0xE6784C24
-#define S3C_QOS_MXI_BASE 0xE6784C48
-#define S3C_QOS_AXI_BASE 0xE6784C6C
-
-#define DBSC3_0_QOS_R0_BASE 0xE6791000
-#define DBSC3_0_QOS_R1_BASE 0xE6791100
-#define DBSC3_0_QOS_R2_BASE 0xE6791200
-#define DBSC3_0_QOS_R3_BASE 0xE6791300
-#define DBSC3_0_QOS_R4_BASE 0xE6791400
-#define DBSC3_0_QOS_R5_BASE 0xE6791500
-#define DBSC3_0_QOS_R6_BASE 0xE6791600
-#define DBSC3_0_QOS_R7_BASE 0xE6791700
-#define DBSC3_0_QOS_R8_BASE 0xE6791800
-#define DBSC3_0_QOS_R9_BASE 0xE6791900
-#define DBSC3_0_QOS_R10_BASE 0xE6791A00
-#define DBSC3_0_QOS_R11_BASE 0xE6791B00
-#define DBSC3_0_QOS_R12_BASE 0xE6791C00
-#define DBSC3_0_QOS_R13_BASE 0xE6791D00
-#define DBSC3_0_QOS_R14_BASE 0xE6791E00
-#define DBSC3_0_QOS_R15_BASE 0xE6791F00
-#define DBSC3_0_QOS_W0_BASE 0xE6792000
-#define DBSC3_0_QOS_W1_BASE 0xE6792100
-#define DBSC3_0_QOS_W2_BASE 0xE6792200
-#define DBSC3_0_QOS_W3_BASE 0xE6792300
-#define DBSC3_0_QOS_W4_BASE 0xE6792400
-#define DBSC3_0_QOS_W5_BASE 0xE6792500
-#define DBSC3_0_QOS_W6_BASE 0xE6792600
-#define DBSC3_0_QOS_W7_BASE 0xE6792700
-#define DBSC3_0_QOS_W8_BASE 0xE6792800
-#define DBSC3_0_QOS_W9_BASE 0xE6792900
-#define DBSC3_0_QOS_W10_BASE 0xE6792A00
-#define DBSC3_0_QOS_W11_BASE 0xE6792B00
-#define DBSC3_0_QOS_W12_BASE 0xE6792C00
-#define DBSC3_0_QOS_W13_BASE 0xE6792D00
-#define DBSC3_0_QOS_W14_BASE 0xE6792E00
-#define DBSC3_0_QOS_W15_BASE 0xE6792F00
-
-#define DBSC3_0_DBADJ2 0xE67900C8
-
-#define CCI_400_MAXOT_1 0xF0091110
-#define CCI_400_MAXOT_2 0xF0092110
-#define CCI_400_QOSCNTL_1 0xF009110C
-#define CCI_400_QOSCNTL_2 0xF009210C
-
-#define MXI_BASE 0xFE960000
-#define MXI_QOS_BASE 0xFE960300
-
-#define SYS_AXI_SYX64TO128_BASE 0xFF800300
-#define SYS_AXI_AVB_BASE 0xFF800340
-#define SYS_AXI_G2D_BASE 0xFF800540
-#define SYS_AXI_IMP0_BASE 0xFF800580
-#define SYS_AXI_IMP1_BASE 0xFF8005C0
-#define SYS_AXI_IMUX0_BASE 0xFF800600
-#define SYS_AXI_IMUX1_BASE 0xFF800640
-#define SYS_AXI_IMUX2_BASE 0xFF800680
-#define SYS_AXI_LBS_BASE 0xFF8006C0
-#define SYS_AXI_MMUDS_BASE 0xFF800700
-#define SYS_AXI_MMUM_BASE 0xFF800740
-#define SYS_AXI_MMUR_BASE 0xFF800780
-#define SYS_AXI_MMUS0_BASE 0xFF8007C0
-#define SYS_AXI_MMUS1_BASE 0xFF800800
-#define SYS_AXI_MTSB0_BASE 0xFF800880
-#define SYS_AXI_MTSB1_BASE 0xFF8008C0
-#define SYS_AXI_PCI_BASE 0xFF800900
-#define SYS_AXI_RTX_BASE 0xFF800940
-#define SYS_AXI_SDS0_BASE 0xFF800A80
-#define SYS_AXI_SDS1_BASE 0xFF800AC0
-#define SYS_AXI_USB20_BASE 0xFF800C00
-#define SYS_AXI_USB21_BASE 0xFF800C40
-#define SYS_AXI_USB22_BASE 0xFF800C80
-#define SYS_AXI_USB30_BASE 0xFF800CC0
-
-#define RT_AXI_SHX_BASE 0xFF810100
-#define RT_AXI_RDS_BASE 0xFF8101C0
-#define RT_AXI_RTX64TO128_BASE 0xFF810200
-#define RT_AXI_STPRO_BASE 0xFF810240
-
-#define MP_AXI_ADSP_BASE 0xFF820100
-#define MP_AXI_ASDS0_BASE 0xFF8201C0
-#define MP_AXI_ASDS1_BASE 0xFF820200
-#define MP_AXI_MLP_BASE 0xFF820240
-#define MP_AXI_MMUMP_BASE 0xFF820280
-#define MP_AXI_SPU_BASE 0xFF8202C0
-#define MP_AXI_SPUC_BASE 0xFF820300
-
-#define SYS_AXI256_AXI128TO256_BASE 0xFF860100
-#define SYS_AXI256_SYX_BASE 0xFF860140
-#define SYS_AXI256_MPX_BASE 0xFF860180
-#define SYS_AXI256_MXI_BASE 0xFF8601C0
-
-#define CCI_AXI_MMUS0_BASE 0xFF880100
-#define CCI_AXI_SYX2_BASE 0xFF880140
-#define CCI_AXI_MMUR_BASE 0xFF880180
-#define CCI_AXI_MMUDS_BASE 0xFF8801C0
-#define CCI_AXI_MMUM_BASE 0xFF880200
-#define CCI_AXI_MXI_BASE 0xFF880240
-#define CCI_AXI_MMUS1_BASE 0xFF880280
-#define CCI_AXI_MMUMP_BASE 0xFF8802C0
-
-#define MEDIA_AXI_JPR_BASE 0xFE964100
-#define MEDIA_AXI_JPW_BASE 0xFE966100
-#define MEDIA_AXI_GCU0R_BASE 0xFE964140
-#define MEDIA_AXI_GCU0W_BASE 0xFE966140
-#define MEDIA_AXI_GCU1R_BASE 0xFE964180
-#define MEDIA_AXI_GCU1W_BASE 0xFE966180
-#define MEDIA_AXI_TDMR_BASE 0xFE964500
-#define MEDIA_AXI_TDMW_BASE 0xFE966500
-#define MEDIA_AXI_VSP0CR_BASE 0xFE964540
-#define MEDIA_AXI_VSP0CW_BASE 0xFE966540
-#define MEDIA_AXI_VSP1CR_BASE 0xFE964580
-#define MEDIA_AXI_VSP1CW_BASE 0xFE966580
-#define MEDIA_AXI_VSPDU0CR_BASE 0xFE9645C0
-#define MEDIA_AXI_VSPDU0CW_BASE 0xFE9665C0
-#define MEDIA_AXI_VSPDU1CR_BASE 0xFE964600
-#define MEDIA_AXI_VSPDU1CW_BASE 0xFE966600
-#define MEDIA_AXI_VIN0W_BASE 0xFE966900
-#define MEDIA_AXI_VSP0R_BASE 0xFE964D00
-#define MEDIA_AXI_VSP0W_BASE 0xFE966D00
-#define MEDIA_AXI_FDP0R_BASE 0xFE964D40
-#define MEDIA_AXI_FDP0W_BASE 0xFE966D40
-#define MEDIA_AXI_IMSR_BASE 0xFE964D80
-#define MEDIA_AXI_IMSW_BASE 0xFE966D80
-#define MEDIA_AXI_VSP1R_BASE 0xFE965100
-#define MEDIA_AXI_VSP1W_BASE 0xFE967100
-#define MEDIA_AXI_FDP1R_BASE 0xFE965140
-#define MEDIA_AXI_FDP1W_BASE 0xFE967140
-#define MEDIA_AXI_IMRR_BASE 0xFE965180
-#define MEDIA_AXI_IMRW_BASE 0xFE967180
-#define MEDIA_AXI_FDP2R_BASE 0xFE9651C0
-#define MEDIA_AXI_FDP2W_BASE 0xFE966DC0
-#define MEDIA_AXI_VSPD0R_BASE 0xFE965500
-#define MEDIA_AXI_VSPD0W_BASE 0xFE967500
-#define MEDIA_AXI_VSPD1R_BASE 0xFE965540
-#define MEDIA_AXI_VSPD1W_BASE 0xFE967540
-#define MEDIA_AXI_DU0R_BASE 0xFE965580
-#define MEDIA_AXI_DU0W_BASE 0xFE967580
-#define MEDIA_AXI_DU1R_BASE 0xFE9655C0
-#define MEDIA_AXI_DU1W_BASE 0xFE9675C0
-#define MEDIA_AXI_VCP0CR_BASE 0xFE965900
-#define MEDIA_AXI_VCP0CW_BASE 0xFE967900
-#define MEDIA_AXI_VCP0VR_BASE 0xFE965940
-#define MEDIA_AXI_VCP0VW_BASE 0xFE967940
-#define MEDIA_AXI_VPC0R_BASE 0xFE965980
-#define MEDIA_AXI_VCP1CR_BASE 0xFE965D00
-#define MEDIA_AXI_VCP1CW_BASE 0xFE967D00
-#define MEDIA_AXI_VCP1VR_BASE 0xFE965D40
-#define MEDIA_AXI_VCP1VW_BASE 0xFE967D40
-#define MEDIA_AXI_VPC1R_BASE 0xFE965D80
-
-#define SYS_AXI_AVBDMSCR 0xFF802000
-#define SYS_AXI_SYX2DMSCR 0xFF802004
-#define SYS_AXI_CC50DMSCR 0xFF802008
-#define SYS_AXI_CC51DMSCR 0xFF80200C
-#define SYS_AXI_CCIDMSCR 0xFF802010
-#define SYS_AXI_CSDMSCR 0xFF802014
-#define SYS_AXI_DDMDMSCR 0xFF802018
-#define SYS_AXI_ETHDMSCR 0xFF80201C
-#define SYS_AXI_G2DDMSCR 0xFF802020
-#define SYS_AXI_IMP0DMSCR 0xFF802024
-#define SYS_AXI_IMP1DMSCR 0xFF802028
-#define SYS_AXI_LBSDMSCR 0xFF80202C
-#define SYS_AXI_MMUDSDMSCR 0xFF802030
-#define SYS_AXI_MMUMXDMSCR 0xFF802034
-#define SYS_AXI_MMURDDMSCR 0xFF802038
-#define SYS_AXI_MMUS0DMSCR 0xFF80203C
-#define SYS_AXI_MMUS1DMSCR 0xFF802040
-#define SYS_AXI_MPXDMSCR 0xFF802044
-#define SYS_AXI_MTSB0DMSCR 0xFF802048
-#define SYS_AXI_MTSB1DMSCR 0xFF80204C
-#define SYS_AXI_PCIDMSCR 0xFF802050
-#define SYS_AXI_RTXDMSCR 0xFF802054
-#define SYS_AXI_SAT0DMSCR 0xFF802058
-#define SYS_AXI_SAT1DMSCR 0xFF80205C
-#define SYS_AXI_SDM0DMSCR 0xFF802060
-#define SYS_AXI_SDM1DMSCR 0xFF802064
-#define SYS_AXI_SDS0DMSCR 0xFF802068
-#define SYS_AXI_SDS1DMSCR 0xFF80206C
-#define SYS_AXI_ETRABDMSCR 0xFF802070
-#define SYS_AXI_ETRKFDMSCR 0xFF802074
-#define SYS_AXI_UDM0DMSCR 0xFF802078
-#define SYS_AXI_UDM1DMSCR 0xFF80207C
-#define SYS_AXI_USB20DMSCR 0xFF802080
-#define SYS_AXI_USB21DMSCR 0xFF802084
-#define SYS_AXI_USB22DMSCR 0xFF802088
-#define SYS_AXI_USB30DMSCR 0xFF80208C
-#define SYS_AXI_X128TO64SLVDMSCR 0xFF802100
-#define SYS_AXI_X64TO128SLVDMSCR 0xFF802104
-#define SYS_AXI_AVBSLVDMSCR 0xFF802108
-#define SYS_AXI_SYX2SLVDMSCR 0xFF80210C
-#define SYS_AXI_ETHSLVDMSCR 0xFF802110
-#define SYS_AXI_GICSLVDMSCR 0xFF802114
-#define SYS_AXI_IMPSLVDMSCR 0xFF802118
-#define SYS_AXI_IMX0SLVDMSCR 0xFF80211C
-#define SYS_AXI_IMX1SLVDMSCR 0xFF802120
-#define SYS_AXI_IMX2SLVDMSCR 0xFF802124
-#define SYS_AXI_LBSSLVDMSCR 0xFF802128
-#define SYS_AXI_MMC0SLVDMSCR 0xFF80212C
-#define SYS_AXI_MMC1SLVDMSCR 0xFF802130
-#define SYS_AXI_MPXSLVDMSCR 0xFF802134
-#define SYS_AXI_MTSB0SLVDMSCR 0xFF802138
-#define SYS_AXI_MTSB1SLVDMSCR 0xFF80213C
-#define SYS_AXI_MXTSLVDMSCR 0xFF802140
-#define SYS_AXI_PCISLVDMSCR 0xFF802144
-#define SYS_AXI_SYAPBSLVDMSCR 0xFF802148
-#define SYS_AXI_QSAPBSLVDMSCR 0xFF80214C
-#define SYS_AXI_RTXSLVDMSCR 0xFF802150
-#define SYS_AXI_SAT0SLVDMSCR 0xFF802168
-#define SYS_AXI_SAT1SLVDMSCR 0xFF80216C
-#define SYS_AXI_SDAP0SLVDMSCR 0xFF802170
-#define SYS_AXI_SDAP1SLVDMSCR 0xFF802174
-#define SYS_AXI_SDAP2SLVDMSCR 0xFF802178
-#define SYS_AXI_SDAP3SLVDMSCR 0xFF80217C
-#define SYS_AXI_SGXSLVDMSCR 0xFF802180
-#define SYS_AXI_STBSLVDMSCR 0xFF802188
-#define SYS_AXI_STMSLVDMSCR 0xFF80218C
-#define SYS_AXI_TSPL0SLVDMSCR 0xFF802194
-#define SYS_AXI_TSPL1SLVDMSCR 0xFF802198
-#define SYS_AXI_TSPL2SLVDMSCR 0xFF80219C
-#define SYS_AXI_USB20SLVDMSCR 0xFF8021A0
-#define SYS_AXI_USB21SLVDMSCR 0xFF8021A4
-#define SYS_AXI_USB22SLVDMSCR 0xFF8021A8
-#define SYS_AXI_USB30SLVDMSCR 0xFF8021AC
-
-#define RT_AXI_CBMDMSCR 0xFF812000
-#define RT_AXI_DBDMSCR 0xFF812004
-#define RT_AXI_RDMDMSCR 0xFF812008
-#define RT_AXI_RDSDMSCR 0xFF81200C
-#define RT_AXI_STRDMSCR 0xFF812010
-#define RT_AXI_SY2RTDMSCR 0xFF812014
-#define RT_AXI_CBSSLVDMSCR 0xFF812100
-#define RT_AXI_DBSSLVDMSCR 0xFF812104
-#define RT_AXI_RTAP1SLVDMSCR 0xFF812108
-#define RT_AXI_RTAP2SLVDMSCR 0xFF81210C
-#define RT_AXI_RTAP3SLVDMSCR 0xFF812110
-#define RT_AXI_RT2SYSLVDMSCR 0xFF812114
-#define RT_AXI_A128TO64SLVDMSCR 0xFF812118
-#define RT_AXI_A64TO128SLVDMSCR 0xFF81211C
-#define RT_AXI_A64TO128CSLVDMSCR 0xFF812120
-#define RT_AXI_UTLBRSLVDMSCR 0xFF812128
-
-#define MP_AXI_ADSPDMSCR 0xFF822000
-#define MP_AXI_ASDM0DMSCR 0xFF822004
-#define MP_AXI_ASDM1DMSCR 0xFF822008
-#define MP_AXI_ASDS0DMSCR 0xFF82200C
-#define MP_AXI_ASDS1DMSCR 0xFF822010
-#define MP_AXI_MLPDMSCR 0xFF822014
-#define MP_AXI_MMUMPDMSCR 0xFF822018
-#define MP_AXI_SPUDMSCR 0xFF82201C
-#define MP_AXI_SPUCDMSCR 0xFF822020
-#define MP_AXI_SY2MPDMSCR 0xFF822024
-#define MP_AXI_ADSPSLVDMSCR 0xFF822100
-#define MP_AXI_MLMSLVDMSCR 0xFF822104
-#define MP_AXI_MPAP4SLVDMSCR 0xFF822108
-#define MP_AXI_MPAP5SLVDMSCR 0xFF82210C
-#define MP_AXI_MPAP6SLVDMSCR 0xFF822110
-#define MP_AXI_MPAP7SLVDMSCR 0xFF822114
-#define MP_AXI_MP2SYSLVDMSCR 0xFF822118
-#define MP_AXI_MP2SY2SLVDMSCR 0xFF82211C
-#define MP_AXI_MPXAPSLVDMSCR 0xFF822124
-#define MP_AXI_SPUSLVDMSCR 0xFF822128
-#define MP_AXI_UTLBMPSLVDMSCR 0xFF82212C
-
-#define ADM_AXI_ASDM0DMSCR 0xFF842000
-#define ADM_AXI_ASDM1DMSCR 0xFF842004
-#define ADM_AXI_MPAP1SLVDMSCR 0xFF842104
-#define ADM_AXI_MPAP2SLVDMSCR 0xFF842108
-#define ADM_AXI_MPAP3SLVDMSCR 0xFF84210C
-
-#define DM_AXI_RDMDMSCR 0xFF852000
-#define DM_AXI_SDM0DMSCR 0xFF852004
-#define DM_AXI_SDM1DMSCR 0xFF852008
-#define DM_AXI_MMAP0SLVDMSCR 0xFF852100
-#define DM_AXI_MMAP1SLVDMSCR 0xFF852104
-#define DM_AXI_QSPAPSLVDMSCR 0xFF852108
-#define DM_AXI_RAP4SLVDMSCR 0xFF85210C
-#define DM_AXI_RAP5SLVDMSCR 0xFF852110
-#define DM_AXI_SAP4SLVDMSCR 0xFF852114
-#define DM_AXI_SAP5SLVDMSCR 0xFF852118
-#define DM_AXI_SAP6SLVDMSCR 0xFF85211C
-#define DM_AXI_SAP65SLVDMSCR 0xFF852120
-#define DM_AXI_SDAP0SLVDMSCR 0xFF852124
-#define DM_AXI_SDAP1SLVDMSCR 0xFF852128
-#define DM_AXI_SDAP2SLVDMSCR 0xFF85212C
-#define DM_AXI_SDAP3SLVDMSCR 0xFF852130
-
-#define SYS_AXI256_SYXDMSCR 0xFF862000
-#define SYS_AXI256_MPXDMSCR 0xFF862004
-#define SYS_AXI256_MXIDMSCR 0xFF862008
-#define SYS_AXI256_X128TO256SLVDMSCR 0xFF862100
-#define SYS_AXI256_X256TO128SLVDMSCR 0xFF862104
-#define SYS_AXI256_SYXSLVDMSCR 0xFF862108
-#define SYS_AXI256_CCXSLVDMSCR 0xFF86210C
-#define SYS_AXI256_S3CSLVDMSCR 0xFF862110
-
-#define MXT_SYXDMSCR 0xFF872000
-#define MXT_CMM0SLVDMSCR 0xFF872100
-#define MXT_CMM1SLVDMSCR 0xFF872104
-#define MXT_CMM2SLVDMSCR 0xFF872108
-#define MXT_FDPSLVDMSCR 0xFF87210C
-#define MXT_IMRSLVDMSCR 0xFF872110
-#define MXT_VINSLVDMSCR 0xFF872114
-#define MXT_VPC0SLVDMSCR 0xFF872118
-#define MXT_VPC1SLVDMSCR 0xFF87211C
-#define MXT_VSP0SLVDMSCR 0xFF872120
-#define MXT_VSP1SLVDMSCR 0xFF872124
-#define MXT_VSPD0SLVDMSCR 0xFF872128
-#define MXT_VSPD1SLVDMSCR 0xFF87212C
-#define MXT_MAP1SLVDMSCR 0xFF872130
-#define MXT_MAP2SLVDMSCR 0xFF872134
-
-#define CCI_AXI_MMUS0DMSCR 0xFF882000
-#define CCI_AXI_SYX2DMSCR 0xFF882004
-#define CCI_AXI_MMURDMSCR 0xFF882008
-#define CCI_AXI_MMUDSDMSCR 0xFF88200C
-#define CCI_AXI_MMUMDMSCR 0xFF882010
-#define CCI_AXI_MXIDMSCR 0xFF882014
-#define CCI_AXI_MMUS1DMSCR 0xFF882018
-#define CCI_AXI_MMUMPDMSCR 0xFF88201C
-#define CCI_AXI_DVMDMSCR 0xFF882020
-#define CCI_AXI_CCISLVDMSCR 0xFF882100
-
-#define CCI_AXI_IPMMUIDVMCR 0xFF880400
-#define CCI_AXI_IPMMURDVMCR 0xFF880404
-#define CCI_AXI_IPMMUS0DVMCR 0xFF880408
-#define CCI_AXI_IPMMUS1DVMCR 0xFF88040C
-#define CCI_AXI_IPMMUMPDVMCR 0xFF880410
-#define CCI_AXI_IPMMUDSDVMCR 0xFF880414
-#define CCI_AXI_AX2ADDRMASK 0xFF88041C
-
-#ifndef __ASSEMBLY__
-#include <asm/types.h>
-
-/* RWDT */
-struct r8a7790_rwdt {
- u32 rwtcnt; /* 0x00 */
- u32 rwtcsra; /* 0x04 */
- u16 rwtcsrb; /* 0x08 */
-};
-
-/* SWDT */
-struct r8a7790_swdt {
- u32 swtcnt; /* 0x00 */
- u32 swtcsra; /* 0x04 */
- u16 swtcsrb; /* 0x08 */
-};
-
-/* LBSC */
-struct r8a7790_lbsc {
- u32 cs0ctrl;
- u32 cs1ctrl;
- u32 ecs0ctrl;
- u32 ecs1ctrl;
- u32 ecs2ctrl;
- u32 ecs3ctrl;
- u32 ecs4ctrl;
- u32 ecs5ctrl;
- u32 dummy0[4]; /* 0x20 .. 0x2C */
- u32 cswcr0;
- u32 cswcr1;
- u32 ecswcr0;
- u32 ecswcr1;
- u32 ecswcr2;
- u32 ecswcr3;
- u32 ecswcr4;
- u32 ecswcr5;
- u32 exdmawcr0;
- u32 exdmawcr1;
- u32 exdmawcr2;
- u32 dummy1[9]; /* 0x5C .. 0x7C */
- u32 cspwcr0;
- u32 cspwcr1;
- u32 ecspwcr0;
- u32 ecspwcr1;
- u32 ecspwcr2;
- u32 ecspwcr3;
- u32 ecspwcr4;
- u32 ecspwcr5;
- u32 exwtsync;
- u32 dummy2[3]; /* 0xA4 .. 0xAC */
- u32 cs0bstctl;
- u32 cs0btph;
- u32 dummy3[2]; /* 0xB8 .. 0xBC */
- u32 cs1gdst;
- u32 ecs0gdst;
- u32 ecs1gdst;
- u32 ecs2gdst;
- u32 ecs3gdst;
- u32 ecs4gdst;
- u32 ecs5gdst;
- u32 dummy4[5]; /* 0xDC .. 0xEC */
- u32 exdmaset0;
- u32 exdmaset1;
- u32 exdmaset2;
- u32 dummy5[5]; /* 0xFC .. 0x10C */
- u32 exdmcr0;
- u32 exdmcr1;
- u32 exdmcr2;
- u32 dummy6[5]; /* 0x11C .. 0x12C */
- u32 bcintsr;
- u32 bcintcr;
- u32 bcintmr;
- u32 dummy7; /* 0x13C */
- u32 exbatlv;
- u32 exwtsts;
- u32 dummy8[14]; /* 0x148 .. 0x17C */
- u32 atacsctrl;
- u32 dummy9[15]; /* 0x184 .. 0x1BC */
- u32 exbct;
- u32 extct;
-};
-
-/* DBSC3 */
-struct r8a7790_dbsc3 {
- u32 dummy0[3]; /* 0x00 .. 0x08 */
- u32 dbstate1;
- u32 dbacen;
- u32 dbrfen;
- u32 dbcmd;
- u32 dbwait;
- u32 dbkind;
- u32 dbconf0;
- u32 dummy1[2]; /* 0x28 .. 0x2C */
- u32 dbphytype;
- u32 dummy2[3]; /* 0x34 .. 0x3C */
- u32 dbtr0;
- u32 dbtr1;
- u32 dbtr2;
- u32 dummy3; /* 0x4C */
- u32 dbtr3;
- u32 dbtr4;
- u32 dbtr5;
- u32 dbtr6;
- u32 dbtr7;
- u32 dbtr8;
- u32 dbtr9;
- u32 dbtr10;
- u32 dbtr11;
- u32 dbtr12;
- u32 dbtr13;
- u32 dbtr14;
- u32 dbtr15;
- u32 dbtr16;
- u32 dbtr17;
- u32 dbtr18;
- u32 dbtr19;
- u32 dummy4[7]; /* 0x94 .. 0xAC */
- u32 dbbl;
- u32 dummy5[3]; /* 0xB4 .. 0xBC */
- u32 dbadj0;
- u32 dummy6; /* 0xC4 */
- u32 dbadj2;
- u32 dummy7[5]; /* 0xCC .. 0xDC */
- u32 dbrfcnf0;
- u32 dbrfcnf1;
- u32 dbrfcnf2;
- u32 dummy8[2]; /* 0xEC .. 0xF0 */
- u32 dbcalcnf;
- u32 dbcaltr;
- u32 dummy9; /* 0xFC */
- u32 dbrnk0;
- u32 dummy10[31]; /* 0x104 .. 0x17C */
- u32 dbpdncnf;
- u32 dummy11[47]; /* 0x184 ..0x23C */
- u32 dbdfistat;
- u32 dbdficnt;
- u32 dummy12[14]; /* 0x248 .. 0x27C */
- u32 dbpdlck;
- u32 dummy13[3]; /* 0x284 .. 0x28C */
- u32 dbpdrga;
- u32 dummy14[3]; /* 0x294 .. 0x29C */
- u32 dbpdrgd;
- u32 dummy15[24]; /* 0x2A4 .. 0x300 */
- u32 dbbs0cnt1;
- u32 dummy16[30]; /* 0x308 .. 0x37C */
- u32 dbwt0cnf0;
- u32 dbwt0cnf1;
- u32 dbwt0cnf2;
- u32 dbwt0cnf3;
- u32 dbwt0cnf4;
-};
-
-/* GPIO */
-struct r8a7790_gpio {
- u32 iointsel;
- u32 inoutsel;
- u32 outdt;
- u32 indt;
- u32 intdt;
- u32 intclr;
- u32 intmsk;
- u32 posneg;
- u32 edglevel;
- u32 filonoff;
- u32 intmsks;
- u32 mskclrs;
- u32 outdtsel;
- u32 outdth;
- u32 outdtl;
- u32 bothedge;
-};
-
-/* S3C(QoS) */
-struct r8a7790_s3c {
- u32 s3cexcladdmsk;
- u32 s3cexclidmsk;
- u32 s3cadsplcr;
- u32 s3cmaar;
- u32 s3carcr11;
- u32 s3crorr;
- u32 s3cworr;
- u32 s3carcr22;
- u32 dummy1[2]; /* 0x20 .. 0x24 */
- u32 s3cmctr;
- u32 dummy2; /* 0x2C */
- u32 cconf0;
- u32 cconf1;
- u32 cconf2;
- u32 cconf3;
-};
-
-struct r8a7790_s3c_qos {
- u32 s3cqos0;
- u32 s3cqos1;
- u32 s3cqos2;
- u32 s3cqos3;
- u32 s3cqos4;
- u32 s3cqos5;
- u32 s3cqos6;
- u32 s3cqos7;
- u32 s3cqos8;
-};
-
-/* DBSC(QoS) */
-struct r8a7790_dbsc3_qos {
- u32 dblgcnt;
- u32 dbtmval0;
- u32 dbtmval1;
- u32 dbtmval2;
- u32 dbtmval3;
- u32 dbrqctr;
- u32 dbthres0;
- u32 dbthres1;
- u32 dbthres2;
- u32 dummy0; /* 0x24 */
- u32 dblgqon;
-};
-
-/* MXI(QoS) */
-struct r8a7790_mxi {
- u32 mxsaar0;
- u32 mxsaar1;
- u32 dummy0[7]; /* 0x08 .. 0x20 */
- u32 mxaxiracr;
- u32 mxs3cracr;
- u32 dummy1[2]; /* 0x2C .. 0x30 */
- u32 mxaxiwacr;
- u32 mxs3cwacr;
- u32 dummy2; /* 0x3C */
- u32 mxrtcr;
- u32 mxwtcr;
-};
-
-struct r8a7790_mxi_qos {
- u32 vspdu0;
- u32 vspdu1;
- u32 du0;
- u32 du1;
-};
-
-/* AXI(QoS) */
-struct r8a7790_axi_qos {
- u32 qosconf;
- u32 qosctset0;
- u32 qosctset1;
- u32 qosctset2;
- u32 qosctset3;
- u32 qosreqctr;
- u32 qosthres0;
- u32 qosthres1;
- u32 qosthres2;
- u32 qosqon;
-};
+#include "rcar-base.h"
-#endif
+#define R8A7790_CUT_ES2X 2
+#define IS_R8A7790_ES2() \
+ (rmobile_get_cpu_rev_integer() == R8A7790_CUT_ES2X)
#endif /* __ASM_ARCH_R8A7790_H */
diff --git a/arch/arm/include/asm/arch-rmobile/r8a7791.h b/arch/arm/include/asm/arch-rmobile/r8a7791.h
index ff30180..4791825 100644
--- a/arch/arm/include/asm/arch-rmobile/r8a7791.h
+++ b/arch/arm/include/asm/arch-rmobile/r8a7791.h
@@ -1,69 +1,18 @@
/*
* arch/arm/include/asm/arch-rmobile/r8a7791.h
*
- * Copyright (C) 2013 Renesas Electronics Corporation
+ * Copyright (C) 2013,2014 Renesas Electronics Corporation
*
* SPDX-License-Identifier: GPL-2.0
- */
+*/
#ifndef __ASM_ARCH_R8A7791_H
#define __ASM_ARCH_R8A7791_H
+#include "rcar-base.h"
/*
- * R8A7791 I/O Addresses
+ * R-Car (R8A7791) I/O Addresses
*/
-#define RWDT_BASE 0xE6020000
-#define SWDT_BASE 0xE6030000
-#define LBSC_BASE 0xFEC00200
-#define DBSC3_0_BASE 0xE6790000
-#define DBSC3_1_BASE 0xE67A0000
-#define TMU_BASE 0xE61E0000
-#define GPIO5_BASE 0xE6055000
-#define SH_QSPI_BASE 0xE6B10000
-
-#define S3C_BASE 0xE6784000
-#define S3C_INT_BASE 0xE6784A00
-#define S3C_MEDIA_BASE 0xE6784B00
-
-#define S3C_QOS_DCACHE_BASE 0xE6784BDC
-#define S3C_QOS_CCI0_BASE 0xE6784C00
-#define S3C_QOS_CCI1_BASE 0xE6784C24
-#define S3C_QOS_MXI_BASE 0xE6784C48
-#define S3C_QOS_AXI_BASE 0xE6784C6C
-
-#define DBSC3_0_QOS_R0_BASE 0xE6791000
-#define DBSC3_0_QOS_R1_BASE 0xE6791100
-#define DBSC3_0_QOS_R2_BASE 0xE6791200
-#define DBSC3_0_QOS_R3_BASE 0xE6791300
-#define DBSC3_0_QOS_R4_BASE 0xE6791400
-#define DBSC3_0_QOS_R5_BASE 0xE6791500
-#define DBSC3_0_QOS_R6_BASE 0xE6791600
-#define DBSC3_0_QOS_R7_BASE 0xE6791700
-#define DBSC3_0_QOS_R8_BASE 0xE6791800
-#define DBSC3_0_QOS_R9_BASE 0xE6791900
-#define DBSC3_0_QOS_R10_BASE 0xE6791A00
-#define DBSC3_0_QOS_R11_BASE 0xE6791B00
-#define DBSC3_0_QOS_R12_BASE 0xE6791C00
-#define DBSC3_0_QOS_R13_BASE 0xE6791D00
-#define DBSC3_0_QOS_R14_BASE 0xE6791E00
-#define DBSC3_0_QOS_R15_BASE 0xE6791F00
-#define DBSC3_0_QOS_W0_BASE 0xE6792000
-#define DBSC3_0_QOS_W1_BASE 0xE6792100
-#define DBSC3_0_QOS_W2_BASE 0xE6792200
-#define DBSC3_0_QOS_W3_BASE 0xE6792300
-#define DBSC3_0_QOS_W4_BASE 0xE6792400
-#define DBSC3_0_QOS_W5_BASE 0xE6792500
-#define DBSC3_0_QOS_W6_BASE 0xE6792600
-#define DBSC3_0_QOS_W7_BASE 0xE6792700
-#define DBSC3_0_QOS_W8_BASE 0xE6792800
-#define DBSC3_0_QOS_W9_BASE 0xE6792900
-#define DBSC3_0_QOS_W10_BASE 0xE6792A00
-#define DBSC3_0_QOS_W11_BASE 0xE6792B00
-#define DBSC3_0_QOS_W12_BASE 0xE6792C00
-#define DBSC3_0_QOS_W13_BASE 0xE6792D00
-#define DBSC3_0_QOS_W14_BASE 0xE6792E00
-#define DBSC3_0_QOS_W15_BASE 0xE6792F00
-
#define DBSC3_1_QOS_R0_BASE 0xE67A1000
#define DBSC3_1_QOS_R1_BASE 0xE67A1100
#define DBSC3_1_QOS_R2_BASE 0xE67A1200
@@ -97,569 +46,8 @@
#define DBSC3_1_QOS_W14_BASE 0xE67A2E00
#define DBSC3_1_QOS_W15_BASE 0xE67A2F00
-#define DBSC3_0_DBADJ2 0xE67900C8
-
-#define CCI_400_MAXOT_1 0xF0091110
-#define CCI_400_MAXOT_2 0xF0092110
-#define CCI_400_QOSCNTL_1 0xF009110C
-#define CCI_400_QOSCNTL_2 0xF009210C
-
-#define MXI_BASE 0xFE960000
-#define MXI_QOS_BASE 0xFE960300
-
-#define SYS_AXI_SYX64TO128_BASE 0xFF800300
-#define SYS_AXI_AVB_BASE 0xFF800340
-#define SYS_AXI_G2D_BASE 0xFF800540
-#define SYS_AXI_IMP0_BASE 0xFF800580
-#define SYS_AXI_IMP1_BASE 0xFF8005C0
-#define SYS_AXI_IMUX0_BASE 0xFF800600
-#define SYS_AXI_IMUX1_BASE 0xFF800640
-#define SYS_AXI_IMUX2_BASE 0xFF800680
-#define SYS_AXI_LBS_BASE 0xFF8006C0
-#define SYS_AXI_MMUDS_BASE 0xFF800700
-#define SYS_AXI_MMUM_BASE 0xFF800740
-#define SYS_AXI_MMUR_BASE 0xFF800780
-#define SYS_AXI_MMUS0_BASE 0xFF8007C0
-#define SYS_AXI_MMUS1_BASE 0xFF800800
-#define SYS_AXI_MTSB0_BASE 0xFF800880
-#define SYS_AXI_MTSB1_BASE 0xFF8008C0
-#define SYS_AXI_PCI_BASE 0xFF800900
-#define SYS_AXI_RTX_BASE 0xFF800940
-#define SYS_AXI_SDS0_BASE 0xFF800A80
-#define SYS_AXI_SDS1_BASE 0xFF800AC0
-#define SYS_AXI_USB20_BASE 0xFF800C00
-#define SYS_AXI_USB21_BASE 0xFF800C40
-#define SYS_AXI_USB22_BASE 0xFF800C80
-#define SYS_AXI_USB30_BASE 0xFF800CC0
-#define SYS_AXI_AX2M_BASE 0xFF800380
-#define SYS_AXI_CC50_BASE 0xFF8003C0
-#define SYS_AXI_CCI_BASE 0xFF800440
-#define SYS_AXI_CS_BASE 0xFF800480
-#define SYS_AXI_DDM_BASE 0xFF8004C0
-#define SYS_AXI_ETH_BASE 0xFF800500
-#define SYS_AXI_MPXM_BASE 0xFF800840
-#define SYS_AXI_SAT0_BASE 0xFF800980
-#define SYS_AXI_SAT1_BASE 0xFF8009C0
-#define SYS_AXI_SDM0_BASE 0xFF800A00
-#define SYS_AXI_SDM1_BASE 0xFF800A40
-#define SYS_AXI_TRAB_BASE 0xFF800B00
-#define SYS_AXI_UDM0_BASE 0xFF800B80
-#define SYS_AXI_UDM1_BASE 0xFF800BC0
-
-#define RT_AXI_SHX_BASE 0xFF810100
-#define RT_AXI_DBG_BASE 0xFF810140
-#define RT_AXI_RDM_BASE 0xFF810180
-#define RT_AXI_RDS_BASE 0xFF8101C0
-#define RT_AXI_RTX64TO128_BASE 0xFF810200
-#define RT_AXI_STPRO_BASE 0xFF810240
-#define RT_AXI_SY2RT_BASE 0xFF810280
-
-#define MP_AXI_ADSP_BASE 0xFF820100
-#define MP_AXI_ASDS0_BASE 0xFF8201C0
-#define MP_AXI_ASDS1_BASE 0xFF820200
-#define MP_AXI_MLP_BASE 0xFF820240
-#define MP_AXI_MMUMP_BASE 0xFF820280
-#define MP_AXI_SPU_BASE 0xFF8202C0
-#define MP_AXI_SPUC_BASE 0xFF820300
-
-#define SYS_AXI256_AXI128TO256_BASE 0xFF860100
-#define SYS_AXI256_SYX_BASE 0xFF860140
-#define SYS_AXI256_MPX_BASE 0xFF860180
-#define SYS_AXI256_MXI_BASE 0xFF8601C0
-
-#define CCI_AXI_MMUS0_BASE 0xFF880100
-#define CCI_AXI_SYX2_BASE 0xFF880140
-#define CCI_AXI_MMUR_BASE 0xFF880180
-#define CCI_AXI_MMUDS_BASE 0xFF8801C0
-#define CCI_AXI_MMUM_BASE 0xFF880200
-#define CCI_AXI_MXI_BASE 0xFF880240
-#define CCI_AXI_MMUS1_BASE 0xFF880280
-#define CCI_AXI_MMUMP_BASE 0xFF8802C0
-
-#define MEDIA_AXI_MXR_BASE 0xFE960080
-#define MEDIA_AXI_MXW_BASE 0xFE9600C0
-#define MEDIA_AXI_JPR_BASE 0xFE964100
-#define MEDIA_AXI_JPW_BASE 0xFE966100
-#define MEDIA_AXI_GCU0R_BASE 0xFE964140
-#define MEDIA_AXI_GCU0W_BASE 0xFE966140
-#define MEDIA_AXI_GCU1R_BASE 0xFE964180
-#define MEDIA_AXI_GCU1W_BASE 0xFE966180
-#define MEDIA_AXI_TDMR_BASE 0xFE964500
-#define MEDIA_AXI_TDMW_BASE 0xFE966500
-#define MEDIA_AXI_VSP0CR_BASE 0xFE964540
-#define MEDIA_AXI_VSP0CW_BASE 0xFE966540
-#define MEDIA_AXI_VSP1CR_BASE 0xFE964580
-#define MEDIA_AXI_VSP1CW_BASE 0xFE966580
-#define MEDIA_AXI_VSPDU0CR_BASE 0xFE9645C0
-#define MEDIA_AXI_VSPDU0CW_BASE 0xFE9665C0
-#define MEDIA_AXI_VSPDU1CR_BASE 0xFE964600
-#define MEDIA_AXI_VSPDU1CW_BASE 0xFE966600
-#define MEDIA_AXI_VIN0W_BASE 0xFE966900
-#define MEDIA_AXI_VSP0R_BASE 0xFE964D00
-#define MEDIA_AXI_VSP0W_BASE 0xFE966D00
-#define MEDIA_AXI_FDP0R_BASE 0xFE964D40
-#define MEDIA_AXI_FDP0W_BASE 0xFE966D40
-#define MEDIA_AXI_IMSR_BASE 0xFE964D80
-#define MEDIA_AXI_IMSW_BASE 0xFE966D80
-#define MEDIA_AXI_VSP1R_BASE 0xFE965100
-#define MEDIA_AXI_VSP1W_BASE 0xFE967100
-#define MEDIA_AXI_FDP1R_BASE 0xFE965140
-#define MEDIA_AXI_FDP1W_BASE 0xFE967140
-#define MEDIA_AXI_IMRR_BASE 0xFE965180
-#define MEDIA_AXI_IMRW_BASE 0xFE967180
-#define MEDIA_AXI_FDP2R_BASE 0xFE9651C0
-#define MEDIA_AXI_FDP2W_BASE 0xFE966DC0
-#define MEDIA_AXI_VSPD0R_BASE 0xFE965500
-#define MEDIA_AXI_VSPD0W_BASE 0xFE967500
-#define MEDIA_AXI_VSPD1R_BASE 0xFE965540
-#define MEDIA_AXI_VSPD1W_BASE 0xFE967540
-#define MEDIA_AXI_DU0R_BASE 0xFE965580
-#define MEDIA_AXI_DU0W_BASE 0xFE967580
-#define MEDIA_AXI_DU1R_BASE 0xFE9655C0
-#define MEDIA_AXI_DU1W_BASE 0xFE9675C0
-#define MEDIA_AXI_VCP0CR_BASE 0xFE965900
-#define MEDIA_AXI_VCP0CW_BASE 0xFE967900
-#define MEDIA_AXI_VCP0VR_BASE 0xFE965940
-#define MEDIA_AXI_VCP0VW_BASE 0xFE967940
-#define MEDIA_AXI_VPC0R_BASE 0xFE965980
-#define MEDIA_AXI_VCP1CR_BASE 0xFE965D00
-#define MEDIA_AXI_VCP1CW_BASE 0xFE967D00
-#define MEDIA_AXI_VCP1VR_BASE 0xFE965D40
-#define MEDIA_AXI_VCP1VW_BASE 0xFE967D40
-#define MEDIA_AXI_VPC1R_BASE 0xFE965D80
-
-#define SYS_AXI_AVBDMSCR 0xFF802000
-#define SYS_AXI_SYX2DMSCR 0xFF802004
-#define SYS_AXI_CC50DMSCR 0xFF802008
-#define SYS_AXI_CC51DMSCR 0xFF80200C
-#define SYS_AXI_CCIDMSCR 0xFF802010
-#define SYS_AXI_CSDMSCR 0xFF802014
-#define SYS_AXI_DDMDMSCR 0xFF802018
-#define SYS_AXI_ETHDMSCR 0xFF80201C
-#define SYS_AXI_G2DDMSCR 0xFF802020
-#define SYS_AXI_IMP0DMSCR 0xFF802024
-#define SYS_AXI_IMP1DMSCR 0xFF802028
-#define SYS_AXI_LBSDMSCR 0xFF80202C
-#define SYS_AXI_MMUDSDMSCR 0xFF802030
-#define SYS_AXI_MMUMXDMSCR 0xFF802034
-#define SYS_AXI_MMURDDMSCR 0xFF802038
-#define SYS_AXI_MMUS0DMSCR 0xFF80203C
-#define SYS_AXI_MMUS1DMSCR 0xFF802040
-#define SYS_AXI_MPXDMSCR 0xFF802044
-#define SYS_AXI_MTSB0DMSCR 0xFF802048
-#define SYS_AXI_MTSB1DMSCR 0xFF80204C
-#define SYS_AXI_PCIDMSCR 0xFF802050
-#define SYS_AXI_RTXDMSCR 0xFF802054
-#define SYS_AXI_SAT0DMSCR 0xFF802058
-#define SYS_AXI_SAT1DMSCR 0xFF80205C
-#define SYS_AXI_SDM0DMSCR 0xFF802060
-#define SYS_AXI_SDM1DMSCR 0xFF802064
-#define SYS_AXI_SDS0DMSCR 0xFF802068
-#define SYS_AXI_SDS1DMSCR 0xFF80206C
-#define SYS_AXI_ETRABDMSCR 0xFF802070
-#define SYS_AXI_ETRKFDMSCR 0xFF802074
-#define SYS_AXI_UDM0DMSCR 0xFF802078
-#define SYS_AXI_UDM1DMSCR 0xFF80207C
-#define SYS_AXI_USB20DMSCR 0xFF802080
-#define SYS_AXI_USB21DMSCR 0xFF802084
-#define SYS_AXI_USB22DMSCR 0xFF802088
-#define SYS_AXI_USB30DMSCR 0xFF80208C
-#define SYS_AXI_X128TO64SLVDMSCR 0xFF802100
-#define SYS_AXI_X64TO128SLVDMSCR 0xFF802104
-#define SYS_AXI_AVBSLVDMSCR 0xFF802108
-#define SYS_AXI_SYX2SLVDMSCR 0xFF80210C
-#define SYS_AXI_ETHSLVDMSCR 0xFF802110
-#define SYS_AXI_GICSLVDMSCR 0xFF802114
-#define SYS_AXI_IMPSLVDMSCR 0xFF802118
-#define SYS_AXI_IMX0SLVDMSCR 0xFF80211C
-#define SYS_AXI_IMX1SLVDMSCR 0xFF802120
-#define SYS_AXI_IMX2SLVDMSCR 0xFF802124
-#define SYS_AXI_LBSSLVDMSCR 0xFF802128
-#define SYS_AXI_MMC0SLVDMSCR 0xFF80212C
-#define SYS_AXI_MMC1SLVDMSCR 0xFF802130
-#define SYS_AXI_MPXSLVDMSCR 0xFF802134
-#define SYS_AXI_MTSB0SLVDMSCR 0xFF802138
-#define SYS_AXI_MTSB1SLVDMSCR 0xFF80213C
-#define SYS_AXI_MXTSLVDMSCR 0xFF802140
-#define SYS_AXI_PCISLVDMSCR 0xFF802144
-#define SYS_AXI_SYAPBSLVDMSCR 0xFF802148
-#define SYS_AXI_QSAPBSLVDMSCR 0xFF80214C
-#define SYS_AXI_RTXSLVDMSCR 0xFF802150
-#define SYS_AXI_SAT0SLVDMSCR 0xFF802168
-#define SYS_AXI_SAT1SLVDMSCR 0xFF80216C
-#define SYS_AXI_SDAP0SLVDMSCR 0xFF802170
-#define SYS_AXI_SDAP1SLVDMSCR 0xFF802174
-#define SYS_AXI_SDAP2SLVDMSCR 0xFF802178
-#define SYS_AXI_SDAP3SLVDMSCR 0xFF80217C
-#define SYS_AXI_SGXSLVDMSCR 0xFF802180
-#define SYS_AXI_STBSLVDMSCR 0xFF802188
-#define SYS_AXI_STMSLVDMSCR 0xFF80218C
-#define SYS_AXI_TSPL0SLVDMSCR 0xFF802194
-#define SYS_AXI_TSPL1SLVDMSCR 0xFF802198
-#define SYS_AXI_TSPL2SLVDMSCR 0xFF80219C
-#define SYS_AXI_USB20SLVDMSCR 0xFF8021A0
-#define SYS_AXI_USB21SLVDMSCR 0xFF8021A4
-#define SYS_AXI_USB22SLVDMSCR 0xFF8021A8
-#define SYS_AXI_USB30SLVDMSCR 0xFF8021AC
-
-#define RT_AXI_CBMDMSCR 0xFF812000
-#define RT_AXI_DBDMSCR 0xFF812004
-#define RT_AXI_RDMDMSCR 0xFF812008
-#define RT_AXI_RDSDMSCR 0xFF81200C
-#define RT_AXI_STRDMSCR 0xFF812010
-#define RT_AXI_SY2RTDMSCR 0xFF812014
-#define RT_AXI_CBSSLVDMSCR 0xFF812100
-#define RT_AXI_DBSSLVDMSCR 0xFF812104
-#define RT_AXI_RTAP1SLVDMSCR 0xFF812108
-#define RT_AXI_RTAP2SLVDMSCR 0xFF81210C
-#define RT_AXI_RTAP3SLVDMSCR 0xFF812110
-#define RT_AXI_RT2SYSLVDMSCR 0xFF812114
-#define RT_AXI_A128TO64SLVDMSCR 0xFF812118
-#define RT_AXI_A64TO128SLVDMSCR 0xFF81211C
-#define RT_AXI_A64TO128CSLVDMSCR 0xFF812120
-#define RT_AXI_UTLBRSLVDMSCR 0xFF812128
-
-#define MP_AXI_ADSPDMSCR 0xFF822000
-#define MP_AXI_ASDM0DMSCR 0xFF822004
-#define MP_AXI_ASDM1DMSCR 0xFF822008
-#define MP_AXI_ASDS0DMSCR 0xFF82200C
-#define MP_AXI_ASDS1DMSCR 0xFF822010
-#define MP_AXI_MLPDMSCR 0xFF822014
-#define MP_AXI_MMUMPDMSCR 0xFF822018
-#define MP_AXI_SPUDMSCR 0xFF82201C
-#define MP_AXI_SPUCDMSCR 0xFF822020
-#define MP_AXI_SY2MPDMSCR 0xFF822024
-#define MP_AXI_ADSPSLVDMSCR 0xFF822100
-#define MP_AXI_MLMSLVDMSCR 0xFF822104
-#define MP_AXI_MPAP4SLVDMSCR 0xFF822108
-#define MP_AXI_MPAP5SLVDMSCR 0xFF82210C
-#define MP_AXI_MPAP6SLVDMSCR 0xFF822110
-#define MP_AXI_MPAP7SLVDMSCR 0xFF822114
-#define MP_AXI_MP2SYSLVDMSCR 0xFF822118
-#define MP_AXI_MP2SY2SLVDMSCR 0xFF82211C
-#define MP_AXI_MPXAPSLVDMSCR 0xFF822124
-#define MP_AXI_SPUSLVDMSCR 0xFF822128
-#define MP_AXI_UTLBMPSLVDMSCR 0xFF82212C
-
-#define ADM_AXI_ASDM0DMSCR 0xFF842000
-#define ADM_AXI_ASDM1DMSCR 0xFF842004
-#define ADM_AXI_MPAP1SLVDMSCR 0xFF842104
-#define ADM_AXI_MPAP2SLVDMSCR 0xFF842108
-#define ADM_AXI_MPAP3SLVDMSCR 0xFF84210C
-
-#define DM_AXI_RDMDMSCR 0xFF852000
-#define DM_AXI_SDM0DMSCR 0xFF852004
-#define DM_AXI_SDM1DMSCR 0xFF852008
-#define DM_AXI_MMAP0SLVDMSCR 0xFF852100
-#define DM_AXI_MMAP1SLVDMSCR 0xFF852104
-#define DM_AXI_QSPAPSLVDMSCR 0xFF852108
-#define DM_AXI_RAP4SLVDMSCR 0xFF85210C
-#define DM_AXI_RAP5SLVDMSCR 0xFF852110
-#define DM_AXI_SAP4SLVDMSCR 0xFF852114
-#define DM_AXI_SAP5SLVDMSCR 0xFF852118
-#define DM_AXI_SAP6SLVDMSCR 0xFF85211C
-#define DM_AXI_SAP65SLVDMSCR 0xFF852120
-#define DM_AXI_SDAP0SLVDMSCR 0xFF852124
-#define DM_AXI_SDAP1SLVDMSCR 0xFF852128
-#define DM_AXI_SDAP2SLVDMSCR 0xFF85212C
-#define DM_AXI_SDAP3SLVDMSCR 0xFF852130
-
-#define SYS_AXI256_SYXDMSCR 0xFF862000
-#define SYS_AXI256_MPXDMSCR 0xFF862004
-#define SYS_AXI256_MXIDMSCR 0xFF862008
-#define SYS_AXI256_X128TO256SLVDMSCR 0xFF862100
-#define SYS_AXI256_X256TO128SLVDMSCR 0xFF862104
-#define SYS_AXI256_SYXSLVDMSCR 0xFF862108
-#define SYS_AXI256_CCXSLVDMSCR 0xFF86210C
-#define SYS_AXI256_S3CSLVDMSCR 0xFF862110
-
-#define MXT_SYXDMSCR 0xFF872000
-#define MXT_CMM0SLVDMSCR 0xFF872100
-#define MXT_CMM1SLVDMSCR 0xFF872104
-#define MXT_CMM2SLVDMSCR 0xFF872108
-#define MXT_FDPSLVDMSCR 0xFF87210C
-#define MXT_IMRSLVDMSCR 0xFF872110
-#define MXT_VINSLVDMSCR 0xFF872114
-#define MXT_VPC0SLVDMSCR 0xFF872118
-#define MXT_VPC1SLVDMSCR 0xFF87211C
-#define MXT_VSP0SLVDMSCR 0xFF872120
-#define MXT_VSP1SLVDMSCR 0xFF872124
-#define MXT_VSPD0SLVDMSCR 0xFF872128
-#define MXT_VSPD1SLVDMSCR 0xFF87212C
-#define MXT_MAP1SLVDMSCR 0xFF872130
-#define MXT_MAP2SLVDMSCR 0xFF872134
-
-#define CCI_AXI_MMUS0DMSCR 0xFF882000
-#define CCI_AXI_SYX2DMSCR 0xFF882004
-#define CCI_AXI_MMURDMSCR 0xFF882008
-#define CCI_AXI_MMUDSDMSCR 0xFF88200C
-#define CCI_AXI_MMUMDMSCR 0xFF882010
-#define CCI_AXI_MXIDMSCR 0xFF882014
-#define CCI_AXI_MMUS1DMSCR 0xFF882018
-#define CCI_AXI_MMUMPDMSCR 0xFF88201C
-#define CCI_AXI_DVMDMSCR 0xFF882020
-#define CCI_AXI_CCISLVDMSCR 0xFF882100
-
-#define CCI_AXI_IPMMUIDVMCR 0xFF880400
-#define CCI_AXI_IPMMURDVMCR 0xFF880404
-#define CCI_AXI_IPMMUS0DVMCR 0xFF880408
-#define CCI_AXI_IPMMUS1DVMCR 0xFF88040C
-#define CCI_AXI_IPMMUMPDVMCR 0xFF880410
-#define CCI_AXI_IPMMUDSDVMCR 0xFF880414
-#define CCI_AXI_AX2ADDRMASK 0xFF88041C
-
-#ifndef __ASSEMBLY__
-#include <asm/types.h>
-
-/* RWDT */
-struct r8a7791_rwdt {
- u32 rwtcnt; /* 0x00 */
- u32 rwtcsra; /* 0x04 */
- u16 rwtcsrb; /* 0x08 */
-};
-
-/* SWDT */
-struct r8a7791_swdt {
- u32 swtcnt; /* 0x00 */
- u32 swtcsra; /* 0x04 */
- u16 swtcsrb; /* 0x08 */
-};
-
-/* LBSC */
-struct r8a7791_lbsc {
- u32 cs0ctrl;
- u32 cs1ctrl;
- u32 ecs0ctrl;
- u32 ecs1ctrl;
- u32 ecs2ctrl;
- u32 ecs3ctrl;
- u32 ecs4ctrl;
- u32 ecs5ctrl;
- u32 dummy0[4]; /* 0x20 .. 0x2C */
- u32 cswcr0;
- u32 cswcr1;
- u32 ecswcr0;
- u32 ecswcr1;
- u32 ecswcr2;
- u32 ecswcr3;
- u32 ecswcr4;
- u32 ecswcr5;
- u32 exdmawcr0;
- u32 exdmawcr1;
- u32 exdmawcr2;
- u32 dummy1[9]; /* 0x5C .. 0x7C */
- u32 cspwcr0;
- u32 cspwcr1;
- u32 ecspwcr0;
- u32 ecspwcr1;
- u32 ecspwcr2;
- u32 ecspwcr3;
- u32 ecspwcr4;
- u32 ecspwcr5;
- u32 exwtsync;
- u32 dummy2[3]; /* 0xA4 .. 0xAC */
- u32 cs0bstctl;
- u32 cs0btph;
- u32 dummy3[2]; /* 0xB8 .. 0xBC */
- u32 cs1gdst;
- u32 ecs0gdst;
- u32 ecs1gdst;
- u32 ecs2gdst;
- u32 ecs3gdst;
- u32 ecs4gdst;
- u32 ecs5gdst;
- u32 dummy4[5]; /* 0xDC .. 0xEC */
- u32 exdmaset0;
- u32 exdmaset1;
- u32 exdmaset2;
- u32 dummy5[5]; /* 0xFC .. 0x10C */
- u32 exdmcr0;
- u32 exdmcr1;
- u32 exdmcr2;
- u32 dummy6[5]; /* 0x11C .. 0x12C */
- u32 bcintsr;
- u32 bcintcr;
- u32 bcintmr;
- u32 dummy7; /* 0x13C */
- u32 exbatlv;
- u32 exwtsts;
- u32 dummy8[14]; /* 0x148 .. 0x17C */
- u32 atacsctrl;
- u32 dummy9[15]; /* 0x184 .. 0x1BC */
- u32 exbct;
- u32 extct;
-};
-
-/* DBSC3 */
-struct r8a7791_dbsc3 {
- u32 dummy0[3]; /* 0x00 .. 0x08 */
- u32 dbstate1;
- u32 dbacen;
- u32 dbrfen;
- u32 dbcmd;
- u32 dbwait;
- u32 dbkind;
- u32 dbconf0;
- u32 dummy1[2]; /* 0x28 .. 0x2C */
- u32 dbphytype;
- u32 dummy2[3]; /* 0x34 .. 0x3C */
- u32 dbtr0;
- u32 dbtr1;
- u32 dbtr2;
- u32 dummy3; /* 0x4C */
- u32 dbtr3;
- u32 dbtr4;
- u32 dbtr5;
- u32 dbtr6;
- u32 dbtr7;
- u32 dbtr8;
- u32 dbtr9;
- u32 dbtr10;
- u32 dbtr11;
- u32 dbtr12;
- u32 dbtr13;
- u32 dbtr14;
- u32 dbtr15;
- u32 dbtr16;
- u32 dbtr17;
- u32 dbtr18;
- u32 dbtr19;
- u32 dummy4[7]; /* 0x94 .. 0xAC */
- u32 dbbl;
- u32 dummy5[3]; /* 0xB4 .. 0xBC */
- u32 dbadj0;
- u32 dummy6; /* 0xC4 */
- u32 dbadj2;
- u32 dummy7[5]; /* 0xCC .. 0xDC */
- u32 dbrfcnf0;
- u32 dbrfcnf1;
- u32 dbrfcnf2;
- u32 dummy8[2]; /* 0xEC .. 0xF0 */
- u32 dbcalcnf;
- u32 dbcaltr;
- u32 dummy9; /* 0xFC */
- u32 dbrnk0;
- u32 dummy10[31]; /* 0x104 .. 0x17C */
- u32 dbpdncnf;
- u32 dummy11[47]; /* 0x184 ..0x23C */
- u32 dbdfistat;
- u32 dbdficnt;
- u32 dummy12[14]; /* 0x248 .. 0x27C */
- u32 dbpdlck;
- u32 dummy13[3]; /* 0x284 .. 0x28C */
- u32 dbpdrga;
- u32 dummy14[3]; /* 0x294 .. 0x29C */
- u32 dbpdrgd;
- u32 dummy15[24]; /* 0x2A4 .. 0x300 */
- u32 dbbs0cnt1;
- u32 dummy16[30]; /* 0x308 .. 0x37C */
- u32 dbwt0cnf0;
- u32 dbwt0cnf1;
- u32 dbwt0cnf2;
- u32 dbwt0cnf3;
- u32 dbwt0cnf4;
-};
-
-/* GPIO */
-struct r8a7791_gpio {
- u32 iointsel;
- u32 inoutsel;
- u32 outdt;
- u32 indt;
- u32 intdt;
- u32 intclr;
- u32 intmsk;
- u32 posneg;
- u32 edglevel;
- u32 filonoff;
- u32 intmsks;
- u32 mskclrs;
- u32 outdtsel;
- u32 outdth;
- u32 outdtl;
- u32 bothedge;
-};
-
-/* S3C(QoS) */
-struct r8a7791_s3c {
- u32 s3cexcladdmsk;
- u32 s3cexclidmsk;
- u32 s3cadsplcr;
- u32 s3cmaar;
- u32 dummy0; /* 0x10 */
- u32 s3crorr;
- u32 s3cworr;
- u32 s3carcr22;
- u32 dummy1[2]; /* 0x20 .. 0x24 */
- u32 s3cmctr;
- u32 dummy2; /* 0x2C */
- u32 cconf0;
- u32 cconf1;
- u32 cconf2;
- u32 cconf3;
-};
-
-struct r8a7791_s3c_qos {
- u32 s3cqos0;
- u32 s3cqos1;
- u32 s3cqos2;
- u32 s3cqos3;
- u32 s3cqos4;
- u32 s3cqos5;
- u32 s3cqos6;
- u32 s3cqos7;
- u32 s3cqos8;
-};
-
-/* DBSC(QoS) */
-struct r8a7791_dbsc3_qos {
- u32 dblgcnt;
- u32 dbtmval0;
- u32 dbtmval1;
- u32 dbtmval2;
- u32 dbtmval3;
- u32 dbrqctr;
- u32 dbthres0;
- u32 dbthres1;
- u32 dbthres2;
- u32 dummy0; /* 0x24 */
- u32 dblgqon;
-};
-
-/* MXI(QoS) */
-struct r8a7791_mxi {
- u32 mxsaar0;
- u32 mxsaar1;
- u32 dummy0[8]; /* 0x08 .. 0x24 */
- u32 mxs3cracr;
- u32 dummy1[3]; /* 0x2C .. 0x34 */
- u32 mxs3cwacr;
- u32 dummy2; /* 0x3C */
- u32 mxrtcr;
- u32 mxwtcr;
-};
-
-struct r8a7791_mxi_qos {
- u32 vspdu0;
- u32 vspdu1;
- u32 du0;
- u32 du1;
-};
-
-/* AXI(QoS) */
-struct r8a7791_axi_qos {
- u32 qosconf;
- u32 qosctset0;
- u32 qosctset1;
- u32 qosctset2;
- u32 qosctset3;
- u32 qosreqctr;
- u32 qosthres0;
- u32 qosthres1;
- u32 qosthres2;
- u32 qosqon;
-};
-
-#endif
+#define R8A7791_CUT_ES2X 2
+#define IS_R8A7791_ES2() \
+ (rmobile_get_cpu_rev_integer() == R8A7791_CUT_ES2X)
#endif /* __ASM_ARCH_R8A7791_H */
diff --git a/arch/arm/include/asm/arch-rmobile/rcar-base.h b/arch/arm/include/asm/arch-rmobile/rcar-base.h
new file mode 100644
index 0000000..4331d31
--- /dev/null
+++ b/arch/arm/include/asm/arch-rmobile/rcar-base.h
@@ -0,0 +1,637 @@
+/*
+ * arch/arm/include/asm/arch-rmobile/rcar-base.h
+ *
+ * Copyright (C) 2013,2014 Renesas Electronics Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0
+*/
+
+#ifndef __ASM_ARCH_RCAR_BASE_H
+#define __ASM_ARCH_RCAR_BASE_H
+
+/*
+ * R-Car (R8A7790/R8A7791) I/O Addresses
+ */
+#define RWDT_BASE 0xE6020000
+#define SWDT_BASE 0xE6030000
+#define LBSC_BASE 0xFEC00200
+#define DBSC3_0_BASE 0xE6790000
+#define DBSC3_1_BASE 0xE67A0000
+#define TMU_BASE 0xE61E0000
+#define GPIO5_BASE 0xE6055000
+#define SH_QSPI_BASE 0xE6B10000
+
+#define S3C_BASE 0xE6784000
+#define S3C_INT_BASE 0xE6784A00
+#define S3C_MEDIA_BASE 0xE6784B00
+
+#define S3C_QOS_DCACHE_BASE 0xE6784BDC
+#define S3C_QOS_CCI0_BASE 0xE6784C00
+#define S3C_QOS_CCI1_BASE 0xE6784C24
+#define S3C_QOS_MXI_BASE 0xE6784C48
+#define S3C_QOS_AXI_BASE 0xE6784C6C
+
+#define DBSC3_0_QOS_R0_BASE 0xE6791000
+#define DBSC3_0_QOS_R1_BASE 0xE6791100
+#define DBSC3_0_QOS_R2_BASE 0xE6791200
+#define DBSC3_0_QOS_R3_BASE 0xE6791300
+#define DBSC3_0_QOS_R4_BASE 0xE6791400
+#define DBSC3_0_QOS_R5_BASE 0xE6791500
+#define DBSC3_0_QOS_R6_BASE 0xE6791600
+#define DBSC3_0_QOS_R7_BASE 0xE6791700
+#define DBSC3_0_QOS_R8_BASE 0xE6791800
+#define DBSC3_0_QOS_R9_BASE 0xE6791900
+#define DBSC3_0_QOS_R10_BASE 0xE6791A00
+#define DBSC3_0_QOS_R11_BASE 0xE6791B00
+#define DBSC3_0_QOS_R12_BASE 0xE6791C00
+#define DBSC3_0_QOS_R13_BASE 0xE6791D00
+#define DBSC3_0_QOS_R14_BASE 0xE6791E00
+#define DBSC3_0_QOS_R15_BASE 0xE6791F00
+#define DBSC3_0_QOS_W0_BASE 0xE6792000
+#define DBSC3_0_QOS_W1_BASE 0xE6792100
+#define DBSC3_0_QOS_W2_BASE 0xE6792200
+#define DBSC3_0_QOS_W3_BASE 0xE6792300
+#define DBSC3_0_QOS_W4_BASE 0xE6792400
+#define DBSC3_0_QOS_W5_BASE 0xE6792500
+#define DBSC3_0_QOS_W6_BASE 0xE6792600
+#define DBSC3_0_QOS_W7_BASE 0xE6792700
+#define DBSC3_0_QOS_W8_BASE 0xE6792800
+#define DBSC3_0_QOS_W9_BASE 0xE6792900
+#define DBSC3_0_QOS_W10_BASE 0xE6792A00
+#define DBSC3_0_QOS_W11_BASE 0xE6792B00
+#define DBSC3_0_QOS_W12_BASE 0xE6792C00
+#define DBSC3_0_QOS_W13_BASE 0xE6792D00
+#define DBSC3_0_QOS_W14_BASE 0xE6792E00
+#define DBSC3_0_QOS_W15_BASE 0xE6792F00
+#define DBSC3_0_DBADJ2 0xE67900C8
+
+#define CCI_400_MAXOT_1 0xF0091110
+#define CCI_400_MAXOT_2 0xF0092110
+#define CCI_400_QOSCNTL_1 0xF009110C
+#define CCI_400_QOSCNTL_2 0xF009210C
+
+#define MXI_BASE 0xFE960000
+#define MXI_QOS_BASE 0xFE960300
+
+#define SYS_AXI_SYX64TO128_BASE 0xFF800300
+#define SYS_AXI_AVB_BASE 0xFF800340
+#define SYS_AXI_G2D_BASE 0xFF800540
+#define SYS_AXI_IMP0_BASE 0xFF800580
+#define SYS_AXI_IMP1_BASE 0xFF8005C0
+#define SYS_AXI_IMUX0_BASE 0xFF800600
+#define SYS_AXI_IMUX1_BASE 0xFF800640
+#define SYS_AXI_IMUX2_BASE 0xFF800680
+#define SYS_AXI_LBS_BASE 0xFF8006C0
+#define SYS_AXI_MMUDS_BASE 0xFF800700
+#define SYS_AXI_MMUM_BASE 0xFF800740
+#define SYS_AXI_MMUR_BASE 0xFF800780
+#define SYS_AXI_MMUS0_BASE 0xFF8007C0
+#define SYS_AXI_MMUS1_BASE 0xFF800800
+#define SYS_AXI_MTSB0_BASE 0xFF800880
+#define SYS_AXI_MTSB1_BASE 0xFF8008C0
+#define SYS_AXI_PCI_BASE 0xFF800900
+#define SYS_AXI_RTX_BASE 0xFF800940
+#define SYS_AXI_SDS0_BASE 0xFF800A80
+#define SYS_AXI_SDS1_BASE 0xFF800AC0
+#define SYS_AXI_USB20_BASE 0xFF800C00
+#define SYS_AXI_USB21_BASE 0xFF800C40
+#define SYS_AXI_USB22_BASE 0xFF800C80
+#define SYS_AXI_USB30_BASE 0xFF800CC0
+#define SYS_AXI_AX2M_BASE 0xFF800380
+#define SYS_AXI_CC50_BASE 0xFF8003C0
+#define SYS_AXI_CCI_BASE 0xFF800440
+#define SYS_AXI_CS_BASE 0xFF800480
+#define SYS_AXI_DDM_BASE 0xFF8004C0
+#define SYS_AXI_ETH_BASE 0xFF800500
+#define SYS_AXI_MPXM_BASE 0xFF800840
+#define SYS_AXI_SAT0_BASE 0xFF800980
+#define SYS_AXI_SAT1_BASE 0xFF8009C0
+#define SYS_AXI_SDM0_BASE 0xFF800A00
+#define SYS_AXI_SDM1_BASE 0xFF800A40
+#define SYS_AXI_TRAB_BASE 0xFF800B00
+#define SYS_AXI_UDM0_BASE 0xFF800B80
+#define SYS_AXI_UDM1_BASE 0xFF800BC0
+
+#define RT_AXI_SHX_BASE 0xFF810100
+#define RT_AXI_DBG_BASE 0xFF810140 /* R8A7791 only */
+#define RT_AXI_RDM_BASE 0xFF810180 /* R8A7791 only */
+#define RT_AXI_RDS_BASE 0xFF8101C0
+#define RT_AXI_RTX64TO128_BASE 0xFF810200
+#define RT_AXI_STPRO_BASE 0xFF810240
+#define RT_AXI_SY2RT_BASE 0xFF810280 /* R8A7791 only */
+
+#define MP_AXI_ADSP_BASE 0xFF820100
+#define MP_AXI_ASDS0_BASE 0xFF8201C0
+#define MP_AXI_ASDS1_BASE 0xFF820200
+#define MP_AXI_MLP_BASE 0xFF820240
+#define MP_AXI_MMUMP_BASE 0xFF820280
+#define MP_AXI_SPU_BASE 0xFF8202C0
+#define MP_AXI_SPUC_BASE 0xFF820300
+
+#define SYS_AXI256_AXI128TO256_BASE 0xFF860100
+#define SYS_AXI256_SYX_BASE 0xFF860140
+#define SYS_AXI256_MPX_BASE 0xFF860180
+#define SYS_AXI256_MXI_BASE 0xFF8601C0
+
+#define CCI_AXI_MMUS0_BASE 0xFF880100
+#define CCI_AXI_SYX2_BASE 0xFF880140
+#define CCI_AXI_MMUR_BASE 0xFF880180
+#define CCI_AXI_MMUDS_BASE 0xFF8801C0
+#define CCI_AXI_MMUM_BASE 0xFF880200
+#define CCI_AXI_MXI_BASE 0xFF880240
+#define CCI_AXI_MMUS1_BASE 0xFF880280
+#define CCI_AXI_MMUMP_BASE 0xFF8802C0
+
+#define MEDIA_AXI_MXR_BASE 0xFE960080 /* R8A7791 only */
+#define MEDIA_AXI_MXW_BASE 0xFE9600C0 /* R8A7791 only */
+#define MEDIA_AXI_JPR_BASE 0xFE964100
+#define MEDIA_AXI_JPW_BASE 0xFE966100
+#define MEDIA_AXI_GCU0R_BASE 0xFE964140
+#define MEDIA_AXI_GCU0W_BASE 0xFE966140
+#define MEDIA_AXI_GCU1R_BASE 0xFE964180
+#define MEDIA_AXI_GCU1W_BASE 0xFE966180
+#define MEDIA_AXI_TDMR_BASE 0xFE964500
+#define MEDIA_AXI_TDMW_BASE 0xFE966500
+#define MEDIA_AXI_VSP0CR_BASE 0xFE964540
+#define MEDIA_AXI_VSP0CW_BASE 0xFE966540
+#define MEDIA_AXI_VSP1CR_BASE 0xFE964580
+#define MEDIA_AXI_VSP1CW_BASE 0xFE966580
+#define MEDIA_AXI_VSPDU0CR_BASE 0xFE9645C0
+#define MEDIA_AXI_VSPDU0CW_BASE 0xFE9665C0
+#define MEDIA_AXI_VSPDU1CR_BASE 0xFE964600
+#define MEDIA_AXI_VSPDU1CW_BASE 0xFE966600
+#define MEDIA_AXI_VIN0W_BASE 0xFE966900
+#define MEDIA_AXI_VSP0R_BASE 0xFE964D00
+#define MEDIA_AXI_VSP0W_BASE 0xFE966D00
+#define MEDIA_AXI_FDP0R_BASE 0xFE964D40
+#define MEDIA_AXI_FDP0W_BASE 0xFE966D40
+#define MEDIA_AXI_IMSR_BASE 0xFE964D80
+#define MEDIA_AXI_IMSW_BASE 0xFE966D80
+#define MEDIA_AXI_VSP1R_BASE 0xFE965100
+#define MEDIA_AXI_VSP1W_BASE 0xFE967100
+#define MEDIA_AXI_FDP1R_BASE 0xFE965140
+#define MEDIA_AXI_FDP1W_BASE 0xFE967140
+#define MEDIA_AXI_IMRR_BASE 0xFE965180
+#define MEDIA_AXI_IMRW_BASE 0xFE967180
+#define MEDIA_AXI_FDP2R_BASE 0xFE9651C0
+#define MEDIA_AXI_FDP2W_BASE 0xFE966DC0
+#define MEDIA_AXI_VSPD0R_BASE 0xFE965500
+#define MEDIA_AXI_VSPD0W_BASE 0xFE967500
+#define MEDIA_AXI_VSPD1R_BASE 0xFE965540
+#define MEDIA_AXI_VSPD1W_BASE 0xFE967540
+#define MEDIA_AXI_DU0R_BASE 0xFE965580
+#define MEDIA_AXI_DU0W_BASE 0xFE967580
+#define MEDIA_AXI_DU1R_BASE 0xFE9655C0
+#define MEDIA_AXI_DU1W_BASE 0xFE9675C0
+#define MEDIA_AXI_VCP0CR_BASE 0xFE965900
+#define MEDIA_AXI_VCP0CW_BASE 0xFE967900
+#define MEDIA_AXI_VCP0VR_BASE 0xFE965940
+#define MEDIA_AXI_VCP0VW_BASE 0xFE967940
+#define MEDIA_AXI_VPC0R_BASE 0xFE965980
+#define MEDIA_AXI_VCP1CR_BASE 0xFE965D00
+#define MEDIA_AXI_VCP1CW_BASE 0xFE967D00
+#define MEDIA_AXI_VCP1VR_BASE 0xFE965D40
+#define MEDIA_AXI_VCP1VW_BASE 0xFE967D40
+#define MEDIA_AXI_VPC1R_BASE 0xFE965D80
+
+#define SYS_AXI_AVBDMSCR 0xFF802000
+#define SYS_AXI_SYX2DMSCR 0xFF802004
+#define SYS_AXI_CC50DMSCR 0xFF802008
+#define SYS_AXI_CC51DMSCR 0xFF80200C
+#define SYS_AXI_CCIDMSCR 0xFF802010
+#define SYS_AXI_CSDMSCR 0xFF802014
+#define SYS_AXI_DDMDMSCR 0xFF802018
+#define SYS_AXI_ETHDMSCR 0xFF80201C
+#define SYS_AXI_G2DDMSCR 0xFF802020
+#define SYS_AXI_IMP0DMSCR 0xFF802024
+#define SYS_AXI_IMP1DMSCR 0xFF802028
+#define SYS_AXI_LBSDMSCR 0xFF80202C
+#define SYS_AXI_MMUDSDMSCR 0xFF802030
+#define SYS_AXI_MMUMXDMSCR 0xFF802034
+#define SYS_AXI_MMURDDMSCR 0xFF802038
+#define SYS_AXI_MMUS0DMSCR 0xFF80203C
+#define SYS_AXI_MMUS1DMSCR 0xFF802040
+#define SYS_AXI_MPXDMSCR 0xFF802044
+#define SYS_AXI_MTSB0DMSCR 0xFF802048
+#define SYS_AXI_MTSB1DMSCR 0xFF80204C
+#define SYS_AXI_PCIDMSCR 0xFF802050
+#define SYS_AXI_RTXDMSCR 0xFF802054
+#define SYS_AXI_SAT0DMSCR 0xFF802058
+#define SYS_AXI_SAT1DMSCR 0xFF80205C
+#define SYS_AXI_SDM0DMSCR 0xFF802060
+#define SYS_AXI_SDM1DMSCR 0xFF802064
+#define SYS_AXI_SDS0DMSCR 0xFF802068
+#define SYS_AXI_SDS1DMSCR 0xFF80206C
+#define SYS_AXI_ETRABDMSCR 0xFF802070
+#define SYS_AXI_ETRKFDMSCR 0xFF802074
+#define SYS_AXI_UDM0DMSCR 0xFF802078
+#define SYS_AXI_UDM1DMSCR 0xFF80207C
+#define SYS_AXI_USB20DMSCR 0xFF802080
+#define SYS_AXI_USB21DMSCR 0xFF802084
+#define SYS_AXI_USB22DMSCR 0xFF802088
+#define SYS_AXI_USB30DMSCR 0xFF80208C
+#define SYS_AXI_X128TO64SLVDMSCR 0xFF802100
+#define SYS_AXI_X64TO128SLVDMSCR 0xFF802104
+#define SYS_AXI_AVBSLVDMSCR 0xFF802108
+#define SYS_AXI_SYX2SLVDMSCR 0xFF80210C
+#define SYS_AXI_ETHSLVDMSCR 0xFF802110
+#define SYS_AXI_GICSLVDMSCR 0xFF802114
+#define SYS_AXI_IMPSLVDMSCR 0xFF802118
+#define SYS_AXI_IMX0SLVDMSCR 0xFF80211C
+#define SYS_AXI_IMX1SLVDMSCR 0xFF802120
+#define SYS_AXI_IMX2SLVDMSCR 0xFF802124
+#define SYS_AXI_LBSSLVDMSCR 0xFF802128
+#define SYS_AXI_MMC0SLVDMSCR 0xFF80212C
+#define SYS_AXI_MMC1SLVDMSCR 0xFF802130
+#define SYS_AXI_MPXSLVDMSCR 0xFF802134
+#define SYS_AXI_MTSB0SLVDMSCR 0xFF802138
+#define SYS_AXI_MTSB1SLVDMSCR 0xFF80213C
+#define SYS_AXI_MXTSLVDMSCR 0xFF802140
+#define SYS_AXI_PCISLVDMSCR 0xFF802144
+#define SYS_AXI_SYAPBSLVDMSCR 0xFF802148
+#define SYS_AXI_QSAPBSLVDMSCR 0xFF80214C
+#define SYS_AXI_RTXSLVDMSCR 0xFF802150
+#define SYS_AXI_SAT0SLVDMSCR 0xFF802168
+#define SYS_AXI_SAT1SLVDMSCR 0xFF80216C
+#define SYS_AXI_SDAP0SLVDMSCR 0xFF802170
+#define SYS_AXI_SDAP1SLVDMSCR 0xFF802174
+#define SYS_AXI_SDAP2SLVDMSCR 0xFF802178
+#define SYS_AXI_SDAP3SLVDMSCR 0xFF80217C
+#define SYS_AXI_SGXSLVDMSCR 0xFF802180
+#define SYS_AXI_STBSLVDMSCR 0xFF802188
+#define SYS_AXI_STMSLVDMSCR 0xFF80218C
+#define SYS_AXI_TSPL0SLVDMSCR 0xFF802194
+#define SYS_AXI_TSPL1SLVDMSCR 0xFF802198
+#define SYS_AXI_TSPL2SLVDMSCR 0xFF80219C
+#define SYS_AXI_USB20SLVDMSCR 0xFF8021A0
+#define SYS_AXI_USB21SLVDMSCR 0xFF8021A4
+#define SYS_AXI_USB22SLVDMSCR 0xFF8021A8
+#define SYS_AXI_USB30SLVDMSCR 0xFF8021AC
+
+#define RT_AXI_CBMDMSCR 0xFF812000
+#define RT_AXI_DBDMSCR 0xFF812004
+#define RT_AXI_RDMDMSCR 0xFF812008
+#define RT_AXI_RDSDMSCR 0xFF81200C
+#define RT_AXI_STRDMSCR 0xFF812010
+#define RT_AXI_SY2RTDMSCR 0xFF812014
+#define RT_AXI_CBSSLVDMSCR 0xFF812100
+#define RT_AXI_DBSSLVDMSCR 0xFF812104
+#define RT_AXI_RTAP1SLVDMSCR 0xFF812108
+#define RT_AXI_RTAP2SLVDMSCR 0xFF81210C
+#define RT_AXI_RTAP3SLVDMSCR 0xFF812110
+#define RT_AXI_RT2SYSLVDMSCR 0xFF812114
+#define RT_AXI_A128TO64SLVDMSCR 0xFF812118
+#define RT_AXI_A64TO128SLVDMSCR 0xFF81211C
+#define RT_AXI_A64TO128CSLVDMSCR 0xFF812120
+#define RT_AXI_UTLBRSLVDMSCR 0xFF812128
+
+#define MP_AXI_ADSPDMSCR 0xFF822000
+#define MP_AXI_ASDM0DMSCR 0xFF822004
+#define MP_AXI_ASDM1DMSCR 0xFF822008
+#define MP_AXI_ASDS0DMSCR 0xFF82200C
+#define MP_AXI_ASDS1DMSCR 0xFF822010
+#define MP_AXI_MLPDMSCR 0xFF822014
+#define MP_AXI_MMUMPDMSCR 0xFF822018
+#define MP_AXI_SPUDMSCR 0xFF82201C
+#define MP_AXI_SPUCDMSCR 0xFF822020
+#define MP_AXI_SY2MPDMSCR 0xFF822024
+#define MP_AXI_ADSPSLVDMSCR 0xFF822100
+#define MP_AXI_MLMSLVDMSCR 0xFF822104
+#define MP_AXI_MPAP4SLVDMSCR 0xFF822108
+#define MP_AXI_MPAP5SLVDMSCR 0xFF82210C
+#define MP_AXI_MPAP6SLVDMSCR 0xFF822110
+#define MP_AXI_MPAP7SLVDMSCR 0xFF822114
+#define MP_AXI_MP2SYSLVDMSCR 0xFF822118
+#define MP_AXI_MP2SY2SLVDMSCR 0xFF82211C
+#define MP_AXI_MPXAPSLVDMSCR 0xFF822124
+#define MP_AXI_SPUSLVDMSCR 0xFF822128
+#define MP_AXI_UTLBMPSLVDMSCR 0xFF82212C
+
+#define ADM_AXI_ASDM0DMSCR 0xFF842000
+#define ADM_AXI_ASDM1DMSCR 0xFF842004
+#define ADM_AXI_MPAP1SLVDMSCR 0xFF842104
+#define ADM_AXI_MPAP2SLVDMSCR 0xFF842108
+#define ADM_AXI_MPAP3SLVDMSCR 0xFF84210C
+
+#define DM_AXI_RDMDMSCR 0xFF852000
+#define DM_AXI_SDM0DMSCR 0xFF852004
+#define DM_AXI_SDM1DMSCR 0xFF852008
+#define DM_AXI_MMAP0SLVDMSCR 0xFF852100
+#define DM_AXI_MMAP1SLVDMSCR 0xFF852104
+#define DM_AXI_QSPAPSLVDMSCR 0xFF852108
+#define DM_AXI_RAP4SLVDMSCR 0xFF85210C
+#define DM_AXI_RAP5SLVDMSCR 0xFF852110
+#define DM_AXI_SAP4SLVDMSCR 0xFF852114
+#define DM_AXI_SAP5SLVDMSCR 0xFF852118
+#define DM_AXI_SAP6SLVDMSCR 0xFF85211C
+#define DM_AXI_SAP65SLVDMSCR 0xFF852120
+#define DM_AXI_SDAP0SLVDMSCR 0xFF852124
+#define DM_AXI_SDAP1SLVDMSCR 0xFF852128
+#define DM_AXI_SDAP2SLVDMSCR 0xFF85212C
+#define DM_AXI_SDAP3SLVDMSCR 0xFF852130
+
+#define SYS_AXI256_SYXDMSCR 0xFF862000
+#define SYS_AXI256_MPXDMSCR 0xFF862004
+#define SYS_AXI256_MXIDMSCR 0xFF862008
+#define SYS_AXI256_X128TO256SLVDMSCR 0xFF862100
+#define SYS_AXI256_X256TO128SLVDMSCR 0xFF862104
+#define SYS_AXI256_SYXSLVDMSCR 0xFF862108
+#define SYS_AXI256_CCXSLVDMSCR 0xFF86210C
+#define SYS_AXI256_S3CSLVDMSCR 0xFF862110
+
+#define MXT_SYXDMSCR 0xFF872000
+#define MXT_CMM0SLVDMSCR 0xFF872100
+#define MXT_CMM1SLVDMSCR 0xFF872104
+#define MXT_CMM2SLVDMSCR 0xFF872108
+#define MXT_FDPSLVDMSCR 0xFF87210C
+#define MXT_IMRSLVDMSCR 0xFF872110
+#define MXT_VINSLVDMSCR 0xFF872114
+#define MXT_VPC0SLVDMSCR 0xFF872118
+#define MXT_VPC1SLVDMSCR 0xFF87211C
+#define MXT_VSP0SLVDMSCR 0xFF872120
+#define MXT_VSP1SLVDMSCR 0xFF872124
+#define MXT_VSPD0SLVDMSCR 0xFF872128
+#define MXT_VSPD1SLVDMSCR 0xFF87212C
+#define MXT_MAP1SLVDMSCR 0xFF872130
+#define MXT_MAP2SLVDMSCR 0xFF872134
+
+#define CCI_AXI_MMUS0DMSCR 0xFF882000
+#define CCI_AXI_SYX2DMSCR 0xFF882004
+#define CCI_AXI_MMURDMSCR 0xFF882008
+#define CCI_AXI_MMUDSDMSCR 0xFF88200C
+#define CCI_AXI_MMUMDMSCR 0xFF882010
+#define CCI_AXI_MXIDMSCR 0xFF882014
+#define CCI_AXI_MMUS1DMSCR 0xFF882018
+#define CCI_AXI_MMUMPDMSCR 0xFF88201C
+#define CCI_AXI_DVMDMSCR 0xFF882020
+#define CCI_AXI_CCISLVDMSCR 0xFF882100
+
+#define CCI_AXI_IPMMUIDVMCR 0xFF880400
+#define CCI_AXI_IPMMURDVMCR 0xFF880404
+#define CCI_AXI_IPMMUS0DVMCR 0xFF880408
+#define CCI_AXI_IPMMUS1DVMCR 0xFF88040C
+#define CCI_AXI_IPMMUMPDVMCR 0xFF880410
+#define CCI_AXI_IPMMUDSDVMCR 0xFF880414
+#define CCI_AXI_AX2ADDRMASK 0xFF88041C
+
+#define PLL0CR 0xE61500D8
+#define PLL0_STC_MASK 0x7F000000
+#define PLL0_STC_BIT 24
+
+#ifndef __ASSEMBLY__
+#include <asm/types.h>
+
+/* RWDT */
+struct rcar_rwdt {
+ u32 rwtcnt; /* 0x00 */
+ u32 rwtcsra; /* 0x04 */
+ u16 rwtcsrb; /* 0x08 */
+};
+
+/* SWDT */
+struct rcar_swdt {
+ u32 swtcnt; /* 0x00 */
+ u32 swtcsra; /* 0x04 */
+ u16 swtcsrb; /* 0x08 */
+};
+
+/* LBSC */
+struct rcar_lbsc {
+ u32 cs0ctrl;
+ u32 cs1ctrl;
+ u32 ecs0ctrl;
+ u32 ecs1ctrl;
+ u32 ecs2ctrl;
+ u32 ecs3ctrl;
+ u32 ecs4ctrl;
+ u32 ecs5ctrl;
+ u32 dummy0[4]; /* 0x20 .. 0x2C */
+ u32 cswcr0;
+ u32 cswcr1;
+ u32 ecswcr0;
+ u32 ecswcr1;
+ u32 ecswcr2;
+ u32 ecswcr3;
+ u32 ecswcr4;
+ u32 ecswcr5;
+ u32 exdmawcr0;
+ u32 exdmawcr1;
+ u32 exdmawcr2;
+ u32 dummy1[9]; /* 0x5C .. 0x7C */
+ u32 cspwcr0;
+ u32 cspwcr1;
+ u32 ecspwcr0;
+ u32 ecspwcr1;
+ u32 ecspwcr2;
+ u32 ecspwcr3;
+ u32 ecspwcr4;
+ u32 ecspwcr5;
+ u32 exwtsync;
+ u32 dummy2[3]; /* 0xA4 .. 0xAC */
+ u32 cs0bstctl;
+ u32 cs0btph;
+ u32 dummy3[2]; /* 0xB8 .. 0xBC */
+ u32 cs1gdst;
+ u32 ecs0gdst;
+ u32 ecs1gdst;
+ u32 ecs2gdst;
+ u32 ecs3gdst;
+ u32 ecs4gdst;
+ u32 ecs5gdst;
+ u32 dummy4[5]; /* 0xDC .. 0xEC */
+ u32 exdmaset0;
+ u32 exdmaset1;
+ u32 exdmaset2;
+ u32 dummy5[5]; /* 0xFC .. 0x10C */
+ u32 exdmcr0;
+ u32 exdmcr1;
+ u32 exdmcr2;
+ u32 dummy6[5]; /* 0x11C .. 0x12C */
+ u32 bcintsr;
+ u32 bcintcr;
+ u32 bcintmr;
+ u32 dummy7; /* 0x13C */
+ u32 exbatlv;
+ u32 exwtsts;
+ u32 dummy8[14]; /* 0x148 .. 0x17C */
+ u32 atacsctrl;
+ u32 dummy9[15]; /* 0x184 .. 0x1BC */
+ u32 exbct;
+ u32 extct;
+};
+
+/* DBSC3 */
+struct rcar_dbsc3 {
+ u32 dummy0[3]; /* 0x00 .. 0x08 */
+ u32 dbstate1;
+ u32 dbacen;
+ u32 dbrfen;
+ u32 dbcmd;
+ u32 dbwait;
+ u32 dbkind;
+ u32 dbconf0;
+ u32 dummy1[2]; /* 0x28 .. 0x2C */
+ u32 dbphytype;
+ u32 dummy2[3]; /* 0x34 .. 0x3C */
+ u32 dbtr0;
+ u32 dbtr1;
+ u32 dbtr2;
+ u32 dummy3; /* 0x4C */
+ u32 dbtr3;
+ u32 dbtr4;
+ u32 dbtr5;
+ u32 dbtr6;
+ u32 dbtr7;
+ u32 dbtr8;
+ u32 dbtr9;
+ u32 dbtr10;
+ u32 dbtr11;
+ u32 dbtr12;
+ u32 dbtr13;
+ u32 dbtr14;
+ u32 dbtr15;
+ u32 dbtr16;
+ u32 dbtr17;
+ u32 dbtr18;
+ u32 dbtr19;
+ u32 dummy4[7]; /* 0x94 .. 0xAC */
+ u32 dbbl;
+ u32 dummy5[3]; /* 0xB4 .. 0xBC */
+ u32 dbadj0;
+ u32 dummy6; /* 0xC4 */
+ u32 dbadj2;
+ u32 dummy7[5]; /* 0xCC .. 0xDC */
+ u32 dbrfcnf0;
+ u32 dbrfcnf1;
+ u32 dbrfcnf2;
+ u32 dummy8[2]; /* 0xEC .. 0xF0 */
+ u32 dbcalcnf;
+ u32 dbcaltr;
+ u32 dummy9; /* 0xFC */
+ u32 dbrnk0;
+ u32 dummy10[31]; /* 0x104 .. 0x17C */
+ u32 dbpdncnf;
+ u32 dummy11[47]; /* 0x184 ..0x23C */
+ u32 dbdfistat;
+ u32 dbdficnt;
+ u32 dummy12[14]; /* 0x248 .. 0x27C */
+ u32 dbpdlck;
+ u32 dummy13[3]; /* 0x284 .. 0x28C */
+ u32 dbpdrga;
+ u32 dummy14[3]; /* 0x294 .. 0x29C */
+ u32 dbpdrgd;
+ u32 dummy15[24]; /* 0x2A4 .. 0x300 */
+ u32 dbbs0cnt1;
+ u32 dummy16[30]; /* 0x308 .. 0x37C */
+ u32 dbwt0cnf0;
+ u32 dbwt0cnf1;
+ u32 dbwt0cnf2;
+ u32 dbwt0cnf3;
+ u32 dbwt0cnf4;
+};
+
+/* GPIO */
+struct rcar_gpio {
+ u32 iointsel;
+ u32 inoutsel;
+ u32 outdt;
+ u32 indt;
+ u32 intdt;
+ u32 intclr;
+ u32 intmsk;
+ u32 posneg;
+ u32 edglevel;
+ u32 filonoff;
+ u32 intmsks;
+ u32 mskclrs;
+ u32 outdtsel;
+ u32 outdth;
+ u32 outdtl;
+ u32 bothedge;
+};
+
+/* S3C(QoS) */
+struct rcar_s3c {
+ u32 s3cexcladdmsk;
+ u32 s3cexclidmsk;
+ u32 s3cadsplcr;
+ u32 s3cmaar;
+ u32 s3carcr11;
+ u32 s3crorr;
+ u32 s3cworr;
+ u32 s3carcr22;
+ u32 dummy1[2]; /* 0x20 .. 0x24 */
+ u32 s3cmctr;
+ u32 dummy2; /* 0x2C */
+ u32 cconf0;
+ u32 cconf1;
+ u32 cconf2;
+ u32 cconf3;
+};
+
+struct rcar_s3c_qos {
+ u32 s3cqos0;
+ u32 s3cqos1;
+ u32 s3cqos2;
+ u32 s3cqos3;
+ u32 s3cqos4;
+ u32 s3cqos5;
+ u32 s3cqos6;
+ u32 s3cqos7;
+ u32 s3cqos8;
+};
+
+/* DBSC(QoS) */
+struct rcar_dbsc3_qos {
+ u32 dblgcnt;
+ u32 dbtmval0;
+ u32 dbtmval1;
+ u32 dbtmval2;
+ u32 dbtmval3;
+ u32 dbrqctr;
+ u32 dbthres0;
+ u32 dbthres1;
+ u32 dbthres2;
+ u32 dummy0; /* 0x24 */
+ u32 dblgqon;
+};
+
+/* MXI(QoS) */
+struct rcar_mxi {
+ u32 mxsaar0;
+ u32 mxsaar1;
+ u32 dummy0[7]; /* 0x08 .. 0x20 */
+ u32 mxaxiracr; /* R8a7790 only */
+ u32 mxs3cracr;
+ u32 dummy1[2]; /* 0x2C .. 0x30 */
+ u32 mxaxiwacr; /* R8a7790 only */
+ u32 mxs3cwacr;
+ u32 dummy2; /* 0x3C */
+ u32 mxrtcr;
+ u32 mxwtcr;
+};
+
+struct rcar_mxi_qos {
+ u32 vspdu0;
+ u32 vspdu1;
+ u32 du0;
+ u32 du1;
+};
+
+/* AXI(QoS) */
+struct rcar_axi_qos {
+ u32 qosconf;
+ u32 qosctset0;
+ u32 qosctset1;
+ u32 qosctset2;
+ u32 qosctset3;
+ u32 qosreqctr;
+ u32 qosthres0;
+ u32 qosthres1;
+ u32 qosthres2;
+ u32 qosqon;
+};
+
+#endif
+
+#endif /* __ASM_ARCH_RCAR_BASE_H */
diff --git a/arch/arm/include/asm/arch-rmobile/rmobile.h b/arch/arm/include/asm/arch-rmobile/rmobile.h
index 2382565..ebddd7a 100644
--- a/arch/arm/include/asm/arch-rmobile/rmobile.h
+++ b/arch/arm/include/asm/arch-rmobile/rmobile.h
@@ -15,4 +15,10 @@
#endif
#endif /* CONFIG_RMOBILE */
+#ifndef __ASSEMBLY__
+u32 rmobile_get_cpu_type(void);
+u32 rmobile_get_cpu_rev_integer(void);
+u32 rmobile_get_cpu_rev_fraction(void);
+#endif /* __ASSEMBLY__ */
+
#endif /* __ASM_ARCH_RMOBILE_H */
diff --git a/arch/arm/include/asm/arch-s5pc1xx/gpio.h b/arch/arm/include/asm/arch-s5pc1xx/gpio.h
index da8df74..d5dbc22 100644
--- a/arch/arm/include/asm/arch-s5pc1xx/gpio.h
+++ b/arch/arm/include/asm/arch-s5pc1xx/gpio.h
@@ -19,170 +19,830 @@ struct s5p_gpio_bank {
unsigned char res1[8];
};
-struct s5pc100_gpio {
- struct s5p_gpio_bank a0;
- struct s5p_gpio_bank a1;
- struct s5p_gpio_bank b;
- struct s5p_gpio_bank c;
- struct s5p_gpio_bank d;
- struct s5p_gpio_bank e0;
- struct s5p_gpio_bank e1;
- struct s5p_gpio_bank f0;
- struct s5p_gpio_bank f1;
- struct s5p_gpio_bank f2;
- struct s5p_gpio_bank f3;
- struct s5p_gpio_bank g0;
- struct s5p_gpio_bank g1;
- struct s5p_gpio_bank g2;
- struct s5p_gpio_bank g3;
- struct s5p_gpio_bank i;
- struct s5p_gpio_bank j0;
- struct s5p_gpio_bank j1;
- struct s5p_gpio_bank j2;
- struct s5p_gpio_bank j3;
- struct s5p_gpio_bank j4;
- struct s5p_gpio_bank k0;
- struct s5p_gpio_bank k1;
- struct s5p_gpio_bank k2;
- struct s5p_gpio_bank k3;
- struct s5p_gpio_bank l0;
- struct s5p_gpio_bank l1;
- struct s5p_gpio_bank l2;
- struct s5p_gpio_bank l3;
- struct s5p_gpio_bank l4;
- struct s5p_gpio_bank h0;
- struct s5p_gpio_bank h1;
- struct s5p_gpio_bank h2;
- struct s5p_gpio_bank h3;
+/* A list of valid GPIO numbers for the asm-generic/gpio.h interface */
+enum s5pc100_gpio_pin {
+ S5PC100_GPIO_A00,
+ S5PC100_GPIO_A01,
+ S5PC100_GPIO_A02,
+ S5PC100_GPIO_A03,
+ S5PC100_GPIO_A04,
+ S5PC100_GPIO_A05,
+ S5PC100_GPIO_A06,
+ S5PC100_GPIO_A07,
+ S5PC100_GPIO_A10,
+ S5PC100_GPIO_A11,
+ S5PC100_GPIO_A12,
+ S5PC100_GPIO_A13,
+ S5PC100_GPIO_A14,
+ S5PC100_GPIO_A15,
+ S5PC100_GPIO_A16,
+ S5PC100_GPIO_A17,
+ S5PC100_GPIO_B0,
+ S5PC100_GPIO_B1,
+ S5PC100_GPIO_B2,
+ S5PC100_GPIO_B3,
+ S5PC100_GPIO_B4,
+ S5PC100_GPIO_B5,
+ S5PC100_GPIO_B6,
+ S5PC100_GPIO_B7,
+ S5PC100_GPIO_C0,
+ S5PC100_GPIO_C1,
+ S5PC100_GPIO_C2,
+ S5PC100_GPIO_C3,
+ S5PC100_GPIO_C4,
+ S5PC100_GPIO_C5,
+ S5PC100_GPIO_C6,
+ S5PC100_GPIO_C7,
+ S5PC100_GPIO_D0,
+ S5PC100_GPIO_D1,
+ S5PC100_GPIO_D2,
+ S5PC100_GPIO_D3,
+ S5PC100_GPIO_D4,
+ S5PC100_GPIO_D5,
+ S5PC100_GPIO_D6,
+ S5PC100_GPIO_D7,
+ S5PC100_GPIO_E00,
+ S5PC100_GPIO_E01,
+ S5PC100_GPIO_E02,
+ S5PC100_GPIO_E03,
+ S5PC100_GPIO_E04,
+ S5PC100_GPIO_E05,
+ S5PC100_GPIO_E06,
+ S5PC100_GPIO_E07,
+ S5PC100_GPIO_E10,
+ S5PC100_GPIO_E11,
+ S5PC100_GPIO_E12,
+ S5PC100_GPIO_E13,
+ S5PC100_GPIO_E14,
+ S5PC100_GPIO_E15,
+ S5PC100_GPIO_E16,
+ S5PC100_GPIO_E17,
+ S5PC100_GPIO_F00,
+ S5PC100_GPIO_F01,
+ S5PC100_GPIO_F02,
+ S5PC100_GPIO_F03,
+ S5PC100_GPIO_F04,
+ S5PC100_GPIO_F05,
+ S5PC100_GPIO_F06,
+ S5PC100_GPIO_F07,
+ S5PC100_GPIO_F10,
+ S5PC100_GPIO_F11,
+ S5PC100_GPIO_F12,
+ S5PC100_GPIO_F13,
+ S5PC100_GPIO_F14,
+ S5PC100_GPIO_F15,
+ S5PC100_GPIO_F16,
+ S5PC100_GPIO_F17,
+ S5PC100_GPIO_F20,
+ S5PC100_GPIO_F21,
+ S5PC100_GPIO_F22,
+ S5PC100_GPIO_F23,
+ S5PC100_GPIO_F24,
+ S5PC100_GPIO_F25,
+ S5PC100_GPIO_F26,
+ S5PC100_GPIO_F27,
+ S5PC100_GPIO_F30,
+ S5PC100_GPIO_F31,
+ S5PC100_GPIO_F32,
+ S5PC100_GPIO_F33,
+ S5PC100_GPIO_F34,
+ S5PC100_GPIO_F35,
+ S5PC100_GPIO_F36,
+ S5PC100_GPIO_F37,
+ S5PC100_GPIO_G00,
+ S5PC100_GPIO_G01,
+ S5PC100_GPIO_G02,
+ S5PC100_GPIO_G03,
+ S5PC100_GPIO_G04,
+ S5PC100_GPIO_G05,
+ S5PC100_GPIO_G06,
+ S5PC100_GPIO_G07,
+ S5PC100_GPIO_G10,
+ S5PC100_GPIO_G11,
+ S5PC100_GPIO_G12,
+ S5PC100_GPIO_G13,
+ S5PC100_GPIO_G14,
+ S5PC100_GPIO_G15,
+ S5PC100_GPIO_G16,
+ S5PC100_GPIO_G17,
+ S5PC100_GPIO_G20,
+ S5PC100_GPIO_G21,
+ S5PC100_GPIO_G22,
+ S5PC100_GPIO_G23,
+ S5PC100_GPIO_G24,
+ S5PC100_GPIO_G25,
+ S5PC100_GPIO_G26,
+ S5PC100_GPIO_G27,
+ S5PC100_GPIO_G30,
+ S5PC100_GPIO_G31,
+ S5PC100_GPIO_G32,
+ S5PC100_GPIO_G33,
+ S5PC100_GPIO_G34,
+ S5PC100_GPIO_G35,
+ S5PC100_GPIO_G36,
+ S5PC100_GPIO_G37,
+ S5PC100_GPIO_I0,
+ S5PC100_GPIO_I1,
+ S5PC100_GPIO_I2,
+ S5PC100_GPIO_I3,
+ S5PC100_GPIO_I4,
+ S5PC100_GPIO_I5,
+ S5PC100_GPIO_I6,
+ S5PC100_GPIO_I7,
+ S5PC100_GPIO_J00,
+ S5PC100_GPIO_J01,
+ S5PC100_GPIO_J02,
+ S5PC100_GPIO_J03,
+ S5PC100_GPIO_J04,
+ S5PC100_GPIO_J05,
+ S5PC100_GPIO_J06,
+ S5PC100_GPIO_J07,
+ S5PC100_GPIO_J10,
+ S5PC100_GPIO_J11,
+ S5PC100_GPIO_J12,
+ S5PC100_GPIO_J13,
+ S5PC100_GPIO_J14,
+ S5PC100_GPIO_J15,
+ S5PC100_GPIO_J16,
+ S5PC100_GPIO_J17,
+ S5PC100_GPIO_J20,
+ S5PC100_GPIO_J21,
+ S5PC100_GPIO_J22,
+ S5PC100_GPIO_J23,
+ S5PC100_GPIO_J24,
+ S5PC100_GPIO_J25,
+ S5PC100_GPIO_J26,
+ S5PC100_GPIO_J27,
+ S5PC100_GPIO_J30,
+ S5PC100_GPIO_J31,
+ S5PC100_GPIO_J32,
+ S5PC100_GPIO_J33,
+ S5PC100_GPIO_J34,
+ S5PC100_GPIO_J35,
+ S5PC100_GPIO_J36,
+ S5PC100_GPIO_J37,
+ S5PC100_GPIO_J40,
+ S5PC100_GPIO_J41,
+ S5PC100_GPIO_J42,
+ S5PC100_GPIO_J43,
+ S5PC100_GPIO_J44,
+ S5PC100_GPIO_J45,
+ S5PC100_GPIO_J46,
+ S5PC100_GPIO_J47,
+ S5PC100_GPIO_K00,
+ S5PC100_GPIO_K01,
+ S5PC100_GPIO_K02,
+ S5PC100_GPIO_K03,
+ S5PC100_GPIO_K04,
+ S5PC100_GPIO_K05,
+ S5PC100_GPIO_K06,
+ S5PC100_GPIO_K07,
+ S5PC100_GPIO_K10,
+ S5PC100_GPIO_K11,
+ S5PC100_GPIO_K12,
+ S5PC100_GPIO_K13,
+ S5PC100_GPIO_K14,
+ S5PC100_GPIO_K15,
+ S5PC100_GPIO_K16,
+ S5PC100_GPIO_K17,
+ S5PC100_GPIO_K20,
+ S5PC100_GPIO_K21,
+ S5PC100_GPIO_K22,
+ S5PC100_GPIO_K23,
+ S5PC100_GPIO_K24,
+ S5PC100_GPIO_K25,
+ S5PC100_GPIO_K26,
+ S5PC100_GPIO_K27,
+ S5PC100_GPIO_K30,
+ S5PC100_GPIO_K31,
+ S5PC100_GPIO_K32,
+ S5PC100_GPIO_K33,
+ S5PC100_GPIO_K34,
+ S5PC100_GPIO_K35,
+ S5PC100_GPIO_K36,
+ S5PC100_GPIO_K37,
+ S5PC100_GPIO_L00,
+ S5PC100_GPIO_L01,
+ S5PC100_GPIO_L02,
+ S5PC100_GPIO_L03,
+ S5PC100_GPIO_L04,
+ S5PC100_GPIO_L05,
+ S5PC100_GPIO_L06,
+ S5PC100_GPIO_L07,
+ S5PC100_GPIO_L10,
+ S5PC100_GPIO_L11,
+ S5PC100_GPIO_L12,
+ S5PC100_GPIO_L13,
+ S5PC100_GPIO_L14,
+ S5PC100_GPIO_L15,
+ S5PC100_GPIO_L16,
+ S5PC100_GPIO_L17,
+ S5PC100_GPIO_L20,
+ S5PC100_GPIO_L21,
+ S5PC100_GPIO_L22,
+ S5PC100_GPIO_L23,
+ S5PC100_GPIO_L24,
+ S5PC100_GPIO_L25,
+ S5PC100_GPIO_L26,
+ S5PC100_GPIO_L27,
+ S5PC100_GPIO_L30,
+ S5PC100_GPIO_L31,
+ S5PC100_GPIO_L32,
+ S5PC100_GPIO_L33,
+ S5PC100_GPIO_L34,
+ S5PC100_GPIO_L35,
+ S5PC100_GPIO_L36,
+ S5PC100_GPIO_L37,
+ S5PC100_GPIO_L40,
+ S5PC100_GPIO_L41,
+ S5PC100_GPIO_L42,
+ S5PC100_GPIO_L43,
+ S5PC100_GPIO_L44,
+ S5PC100_GPIO_L45,
+ S5PC100_GPIO_L46,
+ S5PC100_GPIO_L47,
+ S5PC100_GPIO_H00,
+ S5PC100_GPIO_H01,
+ S5PC100_GPIO_H02,
+ S5PC100_GPIO_H03,
+ S5PC100_GPIO_H04,
+ S5PC100_GPIO_H05,
+ S5PC100_GPIO_H06,
+ S5PC100_GPIO_H07,
+ S5PC100_GPIO_H10,
+ S5PC100_GPIO_H11,
+ S5PC100_GPIO_H12,
+ S5PC100_GPIO_H13,
+ S5PC100_GPIO_H14,
+ S5PC100_GPIO_H15,
+ S5PC100_GPIO_H16,
+ S5PC100_GPIO_H17,
+ S5PC100_GPIO_H20,
+ S5PC100_GPIO_H21,
+ S5PC100_GPIO_H22,
+ S5PC100_GPIO_H23,
+ S5PC100_GPIO_H24,
+ S5PC100_GPIO_H25,
+ S5PC100_GPIO_H26,
+ S5PC100_GPIO_H27,
+ S5PC100_GPIO_H30,
+ S5PC100_GPIO_H31,
+ S5PC100_GPIO_H32,
+ S5PC100_GPIO_H33,
+ S5PC100_GPIO_H34,
+ S5PC100_GPIO_H35,
+ S5PC100_GPIO_H36,
+ S5PC100_GPIO_H37,
+
+ S5PC100_GPIO_MAX_PORT
};
-struct s5pc110_gpio {
- struct s5p_gpio_bank a0;
- struct s5p_gpio_bank a1;
- struct s5p_gpio_bank b;
- struct s5p_gpio_bank c0;
- struct s5p_gpio_bank c1;
- struct s5p_gpio_bank d0;
- struct s5p_gpio_bank d1;
- struct s5p_gpio_bank e0;
- struct s5p_gpio_bank e1;
- struct s5p_gpio_bank f0;
- struct s5p_gpio_bank f1;
- struct s5p_gpio_bank f2;
- struct s5p_gpio_bank f3;
- struct s5p_gpio_bank g0;
- struct s5p_gpio_bank g1;
- struct s5p_gpio_bank g2;
- struct s5p_gpio_bank g3;
- struct s5p_gpio_bank i;
- struct s5p_gpio_bank j0;
- struct s5p_gpio_bank j1;
- struct s5p_gpio_bank j2;
- struct s5p_gpio_bank j3;
- struct s5p_gpio_bank j4;
- struct s5p_gpio_bank mp0_1;
- struct s5p_gpio_bank mp0_2;
- struct s5p_gpio_bank mp0_3;
- struct s5p_gpio_bank mp0_4;
- struct s5p_gpio_bank mp0_5;
- struct s5p_gpio_bank mp0_6;
- struct s5p_gpio_bank mp0_7;
- struct s5p_gpio_bank mp1_0;
- struct s5p_gpio_bank mp1_1;
- struct s5p_gpio_bank mp1_2;
- struct s5p_gpio_bank mp1_3;
- struct s5p_gpio_bank mp1_4;
- struct s5p_gpio_bank mp1_5;
- struct s5p_gpio_bank mp1_6;
- struct s5p_gpio_bank mp1_7;
- struct s5p_gpio_bank mp1_8;
- struct s5p_gpio_bank mp2_0;
- struct s5p_gpio_bank mp2_1;
- struct s5p_gpio_bank mp2_2;
- struct s5p_gpio_bank mp2_3;
- struct s5p_gpio_bank mp2_4;
- struct s5p_gpio_bank mp2_5;
- struct s5p_gpio_bank mp2_6;
- struct s5p_gpio_bank mp2_7;
- struct s5p_gpio_bank mp2_8;
- struct s5p_gpio_bank res1[48];
- struct s5p_gpio_bank h0;
- struct s5p_gpio_bank h1;
- struct s5p_gpio_bank h2;
- struct s5p_gpio_bank h3;
+enum s5pc110_gpio_pin {
+ S5PC110_GPIO_A00,
+ S5PC110_GPIO_A01,
+ S5PC110_GPIO_A02,
+ S5PC110_GPIO_A03,
+ S5PC110_GPIO_A04,
+ S5PC110_GPIO_A05,
+ S5PC110_GPIO_A06,
+ S5PC110_GPIO_A07,
+ S5PC110_GPIO_A10,
+ S5PC110_GPIO_A11,
+ S5PC110_GPIO_A12,
+ S5PC110_GPIO_A13,
+ S5PC110_GPIO_A14,
+ S5PC110_GPIO_A15,
+ S5PC110_GPIO_A16,
+ S5PC110_GPIO_A17,
+ S5PC110_GPIO_B0,
+ S5PC110_GPIO_B1,
+ S5PC110_GPIO_B2,
+ S5PC110_GPIO_B3,
+ S5PC110_GPIO_B4,
+ S5PC110_GPIO_B5,
+ S5PC110_GPIO_B6,
+ S5PC110_GPIO_B7,
+ S5PC110_GPIO_C00,
+ S5PC110_GPIO_C01,
+ S5PC110_GPIO_C02,
+ S5PC110_GPIO_C03,
+ S5PC110_GPIO_C04,
+ S5PC110_GPIO_C05,
+ S5PC110_GPIO_C06,
+ S5PC110_GPIO_C07,
+ S5PC110_GPIO_C10,
+ S5PC110_GPIO_C11,
+ S5PC110_GPIO_C12,
+ S5PC110_GPIO_C13,
+ S5PC110_GPIO_C14,
+ S5PC110_GPIO_C15,
+ S5PC110_GPIO_C16,
+ S5PC110_GPIO_C17,
+ S5PC110_GPIO_D00,
+ S5PC110_GPIO_D01,
+ S5PC110_GPIO_D02,
+ S5PC110_GPIO_D03,
+ S5PC110_GPIO_D04,
+ S5PC110_GPIO_D05,
+ S5PC110_GPIO_D06,
+ S5PC110_GPIO_D07,
+ S5PC110_GPIO_D10,
+ S5PC110_GPIO_D11,
+ S5PC110_GPIO_D12,
+ S5PC110_GPIO_D13,
+ S5PC110_GPIO_D14,
+ S5PC110_GPIO_D15,
+ S5PC110_GPIO_D16,
+ S5PC110_GPIO_D17,
+ S5PC110_GPIO_E00,
+ S5PC110_GPIO_E01,
+ S5PC110_GPIO_E02,
+ S5PC110_GPIO_E03,
+ S5PC110_GPIO_E04,
+ S5PC110_GPIO_E05,
+ S5PC110_GPIO_E06,
+ S5PC110_GPIO_E07,
+ S5PC110_GPIO_E10,
+ S5PC110_GPIO_E11,
+ S5PC110_GPIO_E12,
+ S5PC110_GPIO_E13,
+ S5PC110_GPIO_E14,
+ S5PC110_GPIO_E15,
+ S5PC110_GPIO_E16,
+ S5PC110_GPIO_E17,
+ S5PC110_GPIO_F00,
+ S5PC110_GPIO_F01,
+ S5PC110_GPIO_F02,
+ S5PC110_GPIO_F03,
+ S5PC110_GPIO_F04,
+ S5PC110_GPIO_F05,
+ S5PC110_GPIO_F06,
+ S5PC110_GPIO_F07,
+ S5PC110_GPIO_F10,
+ S5PC110_GPIO_F11,
+ S5PC110_GPIO_F12,
+ S5PC110_GPIO_F13,
+ S5PC110_GPIO_F14,
+ S5PC110_GPIO_F15,
+ S5PC110_GPIO_F16,
+ S5PC110_GPIO_F17,
+ S5PC110_GPIO_F20,
+ S5PC110_GPIO_F21,
+ S5PC110_GPIO_F22,
+ S5PC110_GPIO_F23,
+ S5PC110_GPIO_F24,
+ S5PC110_GPIO_F25,
+ S5PC110_GPIO_F26,
+ S5PC110_GPIO_F27,
+ S5PC110_GPIO_F30,
+ S5PC110_GPIO_F31,
+ S5PC110_GPIO_F32,
+ S5PC110_GPIO_F33,
+ S5PC110_GPIO_F34,
+ S5PC110_GPIO_F35,
+ S5PC110_GPIO_F36,
+ S5PC110_GPIO_F37,
+ S5PC110_GPIO_G00,
+ S5PC110_GPIO_G01,
+ S5PC110_GPIO_G02,
+ S5PC110_GPIO_G03,
+ S5PC110_GPIO_G04,
+ S5PC110_GPIO_G05,
+ S5PC110_GPIO_G06,
+ S5PC110_GPIO_G07,
+ S5PC110_GPIO_G10,
+ S5PC110_GPIO_G11,
+ S5PC110_GPIO_G12,
+ S5PC110_GPIO_G13,
+ S5PC110_GPIO_G14,
+ S5PC110_GPIO_G15,
+ S5PC110_GPIO_G16,
+ S5PC110_GPIO_G17,
+ S5PC110_GPIO_G20,
+ S5PC110_GPIO_G21,
+ S5PC110_GPIO_G22,
+ S5PC110_GPIO_G23,
+ S5PC110_GPIO_G24,
+ S5PC110_GPIO_G25,
+ S5PC110_GPIO_G26,
+ S5PC110_GPIO_G27,
+ S5PC110_GPIO_G30,
+ S5PC110_GPIO_G31,
+ S5PC110_GPIO_G32,
+ S5PC110_GPIO_G33,
+ S5PC110_GPIO_G34,
+ S5PC110_GPIO_G35,
+ S5PC110_GPIO_G36,
+ S5PC110_GPIO_G37,
+ S5PC110_GPIO_I0,
+ S5PC110_GPIO_I1,
+ S5PC110_GPIO_I2,
+ S5PC110_GPIO_I3,
+ S5PC110_GPIO_I4,
+ S5PC110_GPIO_I5,
+ S5PC110_GPIO_I6,
+ S5PC110_GPIO_I7,
+ S5PC110_GPIO_J00,
+ S5PC110_GPIO_J01,
+ S5PC110_GPIO_J02,
+ S5PC110_GPIO_J03,
+ S5PC110_GPIO_J04,
+ S5PC110_GPIO_J05,
+ S5PC110_GPIO_J06,
+ S5PC110_GPIO_J07,
+ S5PC110_GPIO_J10,
+ S5PC110_GPIO_J11,
+ S5PC110_GPIO_J12,
+ S5PC110_GPIO_J13,
+ S5PC110_GPIO_J14,
+ S5PC110_GPIO_J15,
+ S5PC110_GPIO_J16,
+ S5PC110_GPIO_J17,
+ S5PC110_GPIO_J20,
+ S5PC110_GPIO_J21,
+ S5PC110_GPIO_J22,
+ S5PC110_GPIO_J23,
+ S5PC110_GPIO_J24,
+ S5PC110_GPIO_J25,
+ S5PC110_GPIO_J26,
+ S5PC110_GPIO_J27,
+ S5PC110_GPIO_J30,
+ S5PC110_GPIO_J31,
+ S5PC110_GPIO_J32,
+ S5PC110_GPIO_J33,
+ S5PC110_GPIO_J34,
+ S5PC110_GPIO_J35,
+ S5PC110_GPIO_J36,
+ S5PC110_GPIO_J37,
+ S5PC110_GPIO_J40,
+ S5PC110_GPIO_J41,
+ S5PC110_GPIO_J42,
+ S5PC110_GPIO_J43,
+ S5PC110_GPIO_J44,
+ S5PC110_GPIO_J45,
+ S5PC110_GPIO_J46,
+ S5PC110_GPIO_J47,
+ S5PC110_GPIO_MP010,
+ S5PC110_GPIO_MP011,
+ S5PC110_GPIO_MP012,
+ S5PC110_GPIO_MP013,
+ S5PC110_GPIO_MP014,
+ S5PC110_GPIO_MP015,
+ S5PC110_GPIO_MP016,
+ S5PC110_GPIO_MP017,
+ S5PC110_GPIO_MP020,
+ S5PC110_GPIO_MP021,
+ S5PC110_GPIO_MP022,
+ S5PC110_GPIO_MP023,
+ S5PC110_GPIO_MP024,
+ S5PC110_GPIO_MP025,
+ S5PC110_GPIO_MP026,
+ S5PC110_GPIO_MP027,
+ S5PC110_GPIO_MP030,
+ S5PC110_GPIO_MP031,
+ S5PC110_GPIO_MP032,
+ S5PC110_GPIO_MP033,
+ S5PC110_GPIO_MP034,
+ S5PC110_GPIO_MP035,
+ S5PC110_GPIO_MP036,
+ S5PC110_GPIO_MP037,
+ S5PC110_GPIO_MP040,
+ S5PC110_GPIO_MP041,
+ S5PC110_GPIO_MP042,
+ S5PC110_GPIO_MP043,
+ S5PC110_GPIO_MP044,
+ S5PC110_GPIO_MP045,
+ S5PC110_GPIO_MP046,
+ S5PC110_GPIO_MP047,
+ S5PC110_GPIO_MP050,
+ S5PC110_GPIO_MP051,
+ S5PC110_GPIO_MP052,
+ S5PC110_GPIO_MP053,
+ S5PC110_GPIO_MP054,
+ S5PC110_GPIO_MP055,
+ S5PC110_GPIO_MP056,
+ S5PC110_GPIO_MP057,
+ S5PC110_GPIO_MP060,
+ S5PC110_GPIO_MP061,
+ S5PC110_GPIO_MP062,
+ S5PC110_GPIO_MP063,
+ S5PC110_GPIO_MP064,
+ S5PC110_GPIO_MP065,
+ S5PC110_GPIO_MP066,
+ S5PC110_GPIO_MP067,
+ S5PC110_GPIO_MP070,
+ S5PC110_GPIO_MP071,
+ S5PC110_GPIO_MP072,
+ S5PC110_GPIO_MP073,
+ S5PC110_GPIO_MP074,
+ S5PC110_GPIO_MP075,
+ S5PC110_GPIO_MP076,
+ S5PC110_GPIO_MP077,
+ S5PC110_GPIO_MP100,
+ S5PC110_GPIO_MP101,
+ S5PC110_GPIO_MP102,
+ S5PC110_GPIO_MP103,
+ S5PC110_GPIO_MP104,
+ S5PC110_GPIO_MP105,
+ S5PC110_GPIO_MP106,
+ S5PC110_GPIO_MP107,
+ S5PC110_GPIO_MP110,
+ S5PC110_GPIO_MP111,
+ S5PC110_GPIO_MP112,
+ S5PC110_GPIO_MP113,
+ S5PC110_GPIO_MP114,
+ S5PC110_GPIO_MP115,
+ S5PC110_GPIO_MP116,
+ S5PC110_GPIO_MP117,
+ S5PC110_GPIO_MP120,
+ S5PC110_GPIO_MP121,
+ S5PC110_GPIO_MP122,
+ S5PC110_GPIO_MP123,
+ S5PC110_GPIO_MP124,
+ S5PC110_GPIO_MP125,
+ S5PC110_GPIO_MP126,
+ S5PC110_GPIO_MP127,
+ S5PC110_GPIO_MP130,
+ S5PC110_GPIO_MP131,
+ S5PC110_GPIO_MP132,
+ S5PC110_GPIO_MP133,
+ S5PC110_GPIO_MP134,
+ S5PC110_GPIO_MP135,
+ S5PC110_GPIO_MP136,
+ S5PC110_GPIO_MP137,
+ S5PC110_GPIO_MP140,
+ S5PC110_GPIO_MP141,
+ S5PC110_GPIO_MP142,
+ S5PC110_GPIO_MP143,
+ S5PC110_GPIO_MP144,
+ S5PC110_GPIO_MP145,
+ S5PC110_GPIO_MP146,
+ S5PC110_GPIO_MP147,
+ S5PC110_GPIO_MP150,
+ S5PC110_GPIO_MP151,
+ S5PC110_GPIO_MP152,
+ S5PC110_GPIO_MP153,
+ S5PC110_GPIO_MP154,
+ S5PC110_GPIO_MP155,
+ S5PC110_GPIO_MP156,
+ S5PC110_GPIO_MP157,
+ S5PC110_GPIO_MP160,
+ S5PC110_GPIO_MP161,
+ S5PC110_GPIO_MP162,
+ S5PC110_GPIO_MP163,
+ S5PC110_GPIO_MP164,
+ S5PC110_GPIO_MP165,
+ S5PC110_GPIO_MP166,
+ S5PC110_GPIO_MP167,
+ S5PC110_GPIO_MP170,
+ S5PC110_GPIO_MP171,
+ S5PC110_GPIO_MP172,
+ S5PC110_GPIO_MP173,
+ S5PC110_GPIO_MP174,
+ S5PC110_GPIO_MP175,
+ S5PC110_GPIO_MP176,
+ S5PC110_GPIO_MP177,
+ S5PC110_GPIO_MP180,
+ S5PC110_GPIO_MP181,
+ S5PC110_GPIO_MP182,
+ S5PC110_GPIO_MP183,
+ S5PC110_GPIO_MP184,
+ S5PC110_GPIO_MP185,
+ S5PC110_GPIO_MP186,
+ S5PC110_GPIO_MP187,
+ S5PC110_GPIO_MP200,
+ S5PC110_GPIO_MP201,
+ S5PC110_GPIO_MP202,
+ S5PC110_GPIO_MP203,
+ S5PC110_GPIO_MP204,
+ S5PC110_GPIO_MP205,
+ S5PC110_GPIO_MP206,
+ S5PC110_GPIO_MP207,
+ S5PC110_GPIO_MP210,
+ S5PC110_GPIO_MP211,
+ S5PC110_GPIO_MP212,
+ S5PC110_GPIO_MP213,
+ S5PC110_GPIO_MP214,
+ S5PC110_GPIO_MP215,
+ S5PC110_GPIO_MP216,
+ S5PC110_GPIO_MP217,
+ S5PC110_GPIO_MP220,
+ S5PC110_GPIO_MP221,
+ S5PC110_GPIO_MP222,
+ S5PC110_GPIO_MP223,
+ S5PC110_GPIO_MP224,
+ S5PC110_GPIO_MP225,
+ S5PC110_GPIO_MP226,
+ S5PC110_GPIO_MP227,
+ S5PC110_GPIO_MP230,
+ S5PC110_GPIO_MP231,
+ S5PC110_GPIO_MP232,
+ S5PC110_GPIO_MP233,
+ S5PC110_GPIO_MP234,
+ S5PC110_GPIO_MP235,
+ S5PC110_GPIO_MP236,
+ S5PC110_GPIO_MP237,
+ S5PC110_GPIO_MP240,
+ S5PC110_GPIO_MP241,
+ S5PC110_GPIO_MP242,
+ S5PC110_GPIO_MP243,
+ S5PC110_GPIO_MP244,
+ S5PC110_GPIO_MP245,
+ S5PC110_GPIO_MP246,
+ S5PC110_GPIO_MP247,
+ S5PC110_GPIO_MP250,
+ S5PC110_GPIO_MP251,
+ S5PC110_GPIO_MP252,
+ S5PC110_GPIO_MP253,
+ S5PC110_GPIO_MP254,
+ S5PC110_GPIO_MP255,
+ S5PC110_GPIO_MP256,
+ S5PC110_GPIO_MP257,
+ S5PC110_GPIO_MP260,
+ S5PC110_GPIO_MP261,
+ S5PC110_GPIO_MP262,
+ S5PC110_GPIO_MP263,
+ S5PC110_GPIO_MP264,
+ S5PC110_GPIO_MP265,
+ S5PC110_GPIO_MP266,
+ S5PC110_GPIO_MP267,
+ S5PC110_GPIO_MP270,
+ S5PC110_GPIO_MP271,
+ S5PC110_GPIO_MP272,
+ S5PC110_GPIO_MP273,
+ S5PC110_GPIO_MP274,
+ S5PC110_GPIO_MP275,
+ S5PC110_GPIO_MP276,
+ S5PC110_GPIO_MP277,
+ S5PC110_GPIO_MP280,
+ S5PC110_GPIO_MP281,
+ S5PC110_GPIO_MP282,
+ S5PC110_GPIO_MP283,
+ S5PC110_GPIO_MP284,
+ S5PC110_GPIO_MP285,
+ S5PC110_GPIO_MP286,
+ S5PC110_GPIO_MP287,
+ S5PC110_GPIO_RES,
+ S5PC110_GPIO_H00 = (S5PC110_GPIO_RES + (48 * 8)),
+ S5PC110_GPIO_H01,
+ S5PC110_GPIO_H02,
+ S5PC110_GPIO_H03,
+ S5PC110_GPIO_H04,
+ S5PC110_GPIO_H05,
+ S5PC110_GPIO_H06,
+ S5PC110_GPIO_H07,
+ S5PC110_GPIO_H10,
+ S5PC110_GPIO_H11,
+ S5PC110_GPIO_H12,
+ S5PC110_GPIO_H13,
+ S5PC110_GPIO_H14,
+ S5PC110_GPIO_H15,
+ S5PC110_GPIO_H16,
+ S5PC110_GPIO_H17,
+ S5PC110_GPIO_H20,
+ S5PC110_GPIO_H21,
+ S5PC110_GPIO_H22,
+ S5PC110_GPIO_H23,
+ S5PC110_GPIO_H24,
+ S5PC110_GPIO_H25,
+ S5PC110_GPIO_H26,
+ S5PC110_GPIO_H27,
+ S5PC110_GPIO_H30,
+ S5PC110_GPIO_H31,
+ S5PC110_GPIO_H32,
+ S5PC110_GPIO_H33,
+ S5PC110_GPIO_H34,
+ S5PC110_GPIO_H35,
+ S5PC110_GPIO_H36,
+ S5PC110_GPIO_H37,
+
+ S5PC110_GPIO_MAX_PORT
};
-/* functions */
-void s5p_gpio_cfg_pin(struct s5p_gpio_bank *bank, int gpio, int cfg);
-void s5p_gpio_direction_output(struct s5p_gpio_bank *bank, int gpio, int en);
-void s5p_gpio_direction_input(struct s5p_gpio_bank *bank, int gpio);
-void s5p_gpio_set_value(struct s5p_gpio_bank *bank, int gpio, int en);
-unsigned int s5p_gpio_get_value(struct s5p_gpio_bank *bank, int gpio);
-void s5p_gpio_set_pull(struct s5p_gpio_bank *bank, int gpio, int mode);
-void s5p_gpio_set_drv(struct s5p_gpio_bank *bank, int gpio, int mode);
-void s5p_gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode);
+struct gpio_info {
+ unsigned int reg_addr; /* Address of register for this part */
+ unsigned int max_gpio; /* Maximum GPIO in this part */
+};
-/* GPIO pins per bank */
-#define GPIO_PER_BANK 8
+#define S5PC100_GPIO_NUM_PARTS 1
+static struct gpio_info s5pc100_gpio_data[S5PC100_GPIO_NUM_PARTS] = {
+ { S5PC100_GPIO_BASE, S5PC100_GPIO_MAX_PORT },
+};
-#define S5P_GPIO_PART_SHIFT (24)
-#define S5P_GPIO_PART_MASK (0xff)
-#define S5P_GPIO_BANK_SHIFT (8)
-#define S5P_GPIO_BANK_MASK (0xffff)
-#define S5P_GPIO_PIN_MASK (0xff)
+#define S5PC110_GPIO_NUM_PARTS 1
+static struct gpio_info s5pc110_gpio_data[S5PC110_GPIO_NUM_PARTS] = {
+ { S5PC110_GPIO_BASE, S5PC110_GPIO_MAX_PORT },
+};
-#define S5P_GPIO_SET_PART(x) \
- (((x) & S5P_GPIO_PART_MASK) << S5P_GPIO_PART_SHIFT)
+static inline struct gpio_info *get_gpio_data(void)
+{
+ if (cpu_is_s5pc100())
+ return s5pc100_gpio_data;
+ else if (cpu_is_s5pc110())
+ return s5pc110_gpio_data;
-#define S5P_GPIO_GET_PART(x) \
- (((x) >> S5P_GPIO_PART_SHIFT) & S5P_GPIO_PART_MASK)
+ return NULL;
+}
-#define S5P_GPIO_SET_PIN(x) \
- ((x) & S5P_GPIO_PIN_MASK)
+static inline unsigned int get_bank_num(void)
+{
+ if (cpu_is_s5pc100())
+ return S5PC100_GPIO_NUM_PARTS;
+ else if (cpu_is_s5pc110())
+ return S5PC110_GPIO_NUM_PARTS;
-#define S5PC100_SET_BANK(bank) \
- (((unsigned)&(((struct s5pc100_gpio *) \
- S5PC100_GPIO_BASE)->bank) - S5PC100_GPIO_BASE) \
- & S5P_GPIO_BANK_MASK) << S5P_GPIO_BANK_SHIFT)
+ return 0;
+}
-#define S5PC110_SET_BANK(bank) \
- ((((unsigned)&(((struct s5pc110_gpio *) \
- S5PC110_GPIO_BASE)->bank) - S5PC110_GPIO_BASE) \
- & S5P_GPIO_BANK_MASK) << S5P_GPIO_BANK_SHIFT)
+/*
+ * This structure helps mapping symbolic GPIO names into indices from
+ * exynos5_gpio_pin/exynos5420_gpio_pin enums.
+ *
+ * By convention, symbolic GPIO name is defined as follows:
+ *
+ * g[p]<bank><set><bit>, where
+ * p is optional
+ * <bank> - a single character bank name, as defined by the SOC
+ * <set> - a single digit set number
+ * <bit> - bit number within the set (in 0..7 range).
+ *
+ * <set><bit> essentially form an octal number of the GPIO pin within the bank
+ * space. On the 5420 architecture some banks' sets do not start not from zero
+ * ('d' starts from 1 and 'j' starts from 4). To compensate for that and
+ * maintain flat number space withoout holes, those banks use offsets to be
+ * deducted from the pin number.
+ */
+struct gpio_name_num_table {
+ char bank; /* bank name symbol */
+ u8 bank_size; /* total number of pins in the bank */
+ char bank_offset; /* offset of the first bank's pin */
+ unsigned int base; /* index of the first bank's pin in the enum */
+};
-#define s5pc100_gpio_get(bank, pin) \
- (S5P_GPIO_SET_PART(0) | \
- S5PC100_SET_BANK(bank) | \
- S5P_GPIO_SET_PIN(pin))
+#define GPIO_PER_BANK 8
+#define GPIO_ENTRY(name, base, top, offset) { name, top - base, offset, base }
+static const struct gpio_name_num_table s5pc100_gpio_table[] = {
+ GPIO_ENTRY('a', S5PC100_GPIO_A00, S5PC100_GPIO_B0, 0),
+ GPIO_ENTRY('b', S5PC100_GPIO_B0, S5PC100_GPIO_C0, 0),
+ GPIO_ENTRY('c', S5PC100_GPIO_C0, S5PC100_GPIO_D0, 0),
+ GPIO_ENTRY('d', S5PC100_GPIO_D0, S5PC100_GPIO_E00, 0),
+ GPIO_ENTRY('e', S5PC100_GPIO_E00, S5PC100_GPIO_F00, 0),
+ GPIO_ENTRY('f', S5PC100_GPIO_F00, S5PC100_GPIO_G00, 0),
+ GPIO_ENTRY('g', S5PC100_GPIO_G00, S5PC100_GPIO_I0, 0),
+ GPIO_ENTRY('i', S5PC100_GPIO_I0, S5PC100_GPIO_J00, 0),
+ GPIO_ENTRY('j', S5PC100_GPIO_J00, S5PC100_GPIO_K00, 0),
+ GPIO_ENTRY('k', S5PC100_GPIO_K00, S5PC100_GPIO_L00, 0),
+ GPIO_ENTRY('l', S5PC100_GPIO_L00, S5PC100_GPIO_H00, 0),
+ GPIO_ENTRY('h', S5PC100_GPIO_H00, S5PC100_GPIO_MAX_PORT, 0),
+ { 0 }
+};
-#define s5pc110_gpio_get(bank, pin) \
- (S5P_GPIO_SET_PART(0) | \
- S5PC110_SET_BANK(bank) | \
- S5P_GPIO_SET_PIN(pin))
+static const struct gpio_name_num_table s5pc110_gpio_table[] = {
+ GPIO_ENTRY('a', S5PC110_GPIO_A00, S5PC110_GPIO_B0, 0),
+ GPIO_ENTRY('b', S5PC110_GPIO_B0, S5PC110_GPIO_C00, 0),
+ GPIO_ENTRY('c', S5PC110_GPIO_C00, S5PC110_GPIO_D00, 0),
+ GPIO_ENTRY('d', S5PC110_GPIO_D00, S5PC110_GPIO_E00, 0),
+ GPIO_ENTRY('e', S5PC110_GPIO_E00, S5PC110_GPIO_F00, 0),
+ GPIO_ENTRY('f', S5PC110_GPIO_F00, S5PC110_GPIO_G00, 0),
+ GPIO_ENTRY('g', S5PC110_GPIO_G00, S5PC110_GPIO_I0, 0),
+ GPIO_ENTRY('i', S5PC110_GPIO_I0, S5PC110_GPIO_J00, 0),
+ GPIO_ENTRY('j', S5PC110_GPIO_J00, S5PC110_GPIO_MP010, 0),
+ GPIO_ENTRY('h', S5PC110_GPIO_H00, S5PC110_GPIO_MAX_PORT, 0),
+ { 0 }
+};
-static inline unsigned int s5p_gpio_base(int nr)
-{
- return samsung_get_base_gpio();
-}
+/* functions */
+void gpio_cfg_pin(int gpio, int cfg);
+void gpio_set_pull(int gpio, int mode);
+void gpio_set_drv(int gpio, int mode);
+int gpio_direction_output(unsigned gpio, int value);
+int gpio_set_value(unsigned gpio, int value);
+int gpio_get_value(unsigned gpio);
+void gpio_set_rate(int gpio, int mode);
+struct s5p_gpio_bank *s5p_gpio_get_bank(unsigned gpio);
+int s5p_gpio_get_pin(unsigned gpio);
+
+/* GPIO pins per bank */
+#define GPIO_PER_BANK 8
#endif
/* Pin configurations */
-#define GPIO_INPUT 0x0
-#define GPIO_OUTPUT 0x1
-#define GPIO_IRQ 0xf
-#define GPIO_FUNC(x) (x)
+#define S5P_GPIO_INPUT 0x0
+#define S5P_GPIO_OUTPUT 0x1
+#define S5P_GPIO_IRQ 0xf
+#define S5P_GPIO_FUNC(x) (x)
/* Pull mode */
-#define GPIO_PULL_NONE 0x0
-#define GPIO_PULL_DOWN 0x1
-#define GPIO_PULL_UP 0x2
+#define S5P_GPIO_PULL_NONE 0x0
+#define S5P_GPIO_PULL_DOWN 0x1
+#define S5P_GPIO_PULL_UP 0x2
/* Drive Strength level */
-#define GPIO_DRV_1X 0x0
-#define GPIO_DRV_3X 0x1
-#define GPIO_DRV_2X 0x2
-#define GPIO_DRV_4X 0x3
-#define GPIO_DRV_FAST 0x0
-#define GPIO_DRV_SLOW 0x1
+#define S5P_GPIO_DRV_1X 0x0
+#define S5P_GPIO_DRV_3X 0x1
+#define S5P_GPIO_DRV_2X 0x2
+#define S5P_GPIO_DRV_4X 0x3
+#define S5P_GPIO_DRV_FAST 0x0
+#define S5P_GPIO_DRV_SLOW 0x1
#endif
diff --git a/arch/arm/include/asm/arch-tegra/gpio.h b/arch/arm/include/asm/arch-tegra/gpio.h
index d97190d..44cd455 100644
--- a/arch/arm/include/asm/arch-tegra/gpio.h
+++ b/arch/arm/include/asm/arch-tegra/gpio.h
@@ -14,11 +14,31 @@
#define GPIO_FULLPORT(x) ((x) >> 3)
#define GPIO_BIT(x) ((x) & 0x7)
+enum tegra_gpio_init {
+ TEGRA_GPIO_INIT_IN,
+ TEGRA_GPIO_INIT_OUT0,
+ TEGRA_GPIO_INIT_OUT1,
+};
+
+struct tegra_gpio_config {
+ u32 gpio:16;
+ u32 init:2;
+};
+
/*
* Tegra-specific GPIO API
*/
+/**
+ * Configure a list of GPIOs
+ *
+ * @param config List of GPIO configurations
+ * @param len Number of config items in list
+ */
+void gpio_config_table(const struct tegra_gpio_config *config, int len);
+
void gpio_info(void);
#define gpio_status() gpio_info()
+
#endif /* TEGRA_GPIO_H_ */
diff --git a/arch/arm/include/asm/arch-tegra/pinmux.h b/arch/arm/include/asm/arch-tegra/pinmux.h
index 035159d..da47769 100644
--- a/arch/arm/include/asm/arch-tegra/pinmux.h
+++ b/arch/arm/include/asm/arch-tegra/pinmux.h
@@ -80,6 +80,11 @@ struct pmux_pingrp_config {
#endif
};
+#if !defined(CONFIG_TEGRA20) && !defined(CONFIG_TEGRA30)
+/* Set the pinmux CLAMP_INPUTS_WHEN_TRISTATED bit */
+void pinmux_set_tristate_input_clamping(void);
+#endif
+
/* Set the mux function for a pin group */
void pinmux_set_func(enum pmux_pingrp pin, enum pmux_func func);
diff --git a/arch/arm/include/asm/arch-tegra/tegra_mmc.h b/arch/arm/include/asm/arch-tegra/tegra_mmc.h
index 310bbd7..84e7b55 100644
--- a/arch/arm/include/asm/arch-tegra/tegra_mmc.h
+++ b/arch/arm/include/asm/arch-tegra/tegra_mmc.h
@@ -14,8 +14,6 @@
/* for mmc_config definition */
#include <mmc.h>
-#define MAX_HOSTS 4 /* Max number of 'hosts'/controllers */
-
#ifndef __ASSEMBLY__
struct tegra_mmc {
unsigned int sysad; /* _SYSTEM_ADDRESS_0 */
diff --git a/arch/arm/include/asm/arch-tegra114/pinmux.h b/arch/arm/include/asm/arch-tegra114/pinmux.h
index c1cb3ef..b86562a 100644
--- a/arch/arm/include/asm/arch-tegra114/pinmux.h
+++ b/arch/arm/include/asm/arch-tegra114/pinmux.h
@@ -231,6 +231,7 @@ enum pmux_drvgrp {
};
enum pmux_func {
+ PMUX_FUNC_DEFAULT,
PMUX_FUNC_BLINK,
PMUX_FUNC_CEC,
PMUX_FUNC_CLDVFS,
diff --git a/arch/arm/include/asm/arch-tegra124/pinmux.h b/arch/arm/include/asm/arch-tegra124/pinmux.h
index c49801c..1884935 100644
--- a/arch/arm/include/asm/arch-tegra124/pinmux.h
+++ b/arch/arm/include/asm/arch-tegra124/pinmux.h
@@ -247,6 +247,7 @@ enum pmux_drvgrp {
};
enum pmux_func {
+ PMUX_FUNC_DEFAULT,
PMUX_FUNC_BLINK,
PMUX_FUNC_CCLA,
PMUX_FUNC_CEC,
diff --git a/arch/arm/include/asm/arch-tegra20/pinmux.h b/arch/arm/include/asm/arch-tegra20/pinmux.h
index 11c0104..f7bc97f 100644
--- a/arch/arm/include/asm/arch-tegra20/pinmux.h
+++ b/arch/arm/include/asm/arch-tegra20/pinmux.h
@@ -166,6 +166,7 @@ enum pmux_pingrp {
* purely a convenience. The translation is done through a table search.
*/
enum pmux_func {
+ PMUX_FUNC_DEFAULT,
PMUX_FUNC_AHB_CLK,
PMUX_FUNC_APB_CLK,
PMUX_FUNC_AUDIO_SYNC,
diff --git a/arch/arm/include/asm/arch-tegra30/pinmux.h b/arch/arm/include/asm/arch-tegra30/pinmux.h
index 6d83061..a42e009 100644
--- a/arch/arm/include/asm/arch-tegra30/pinmux.h
+++ b/arch/arm/include/asm/arch-tegra30/pinmux.h
@@ -306,6 +306,7 @@ enum pmux_drvgrp {
};
enum pmux_func {
+ PMUX_FUNC_DEFAULT,
PMUX_FUNC_BLINK,
PMUX_FUNC_CEC,
PMUX_FUNC_CLK_12M_OUT,
diff --git a/arch/arm/include/asm/imx-common/iomux-v3.h b/arch/arm/include/asm/imx-common/iomux-v3.h
index dec11a1..cca920b 100644
--- a/arch/arm/include/asm/imx-common/iomux-v3.h
+++ b/arch/arm/include/asm/imx-common/iomux-v3.h
@@ -111,6 +111,11 @@ typedef u64 iomux_v3_cfg_t;
#define PAD_CTL_DSE_40ohm (6 << 3)
#define PAD_CTL_DSE_34ohm (7 << 3)
+#if defined CONFIG_MX6SL
+#define PAD_CTL_LVE (1 << 1)
+#define PAD_CTL_LVE_BIT (1 << 22)
+#endif
+
#elif defined(CONFIG_VF610)
#define PAD_MUX_MODE_SHIFT 20
diff --git a/arch/arm/include/asm/imx-common/video.h b/arch/arm/include/asm/imx-common/video.h
new file mode 100644
index 0000000..2d94850
--- /dev/null
+++ b/arch/arm/include/asm/imx-common/video.h
@@ -0,0 +1,24 @@
+/*
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __IMX_VIDEO_H_
+#define __IMX_VIDEO_H_
+
+#include <linux/fb.h>
+#include <ipu_pixfmt.h>
+
+struct display_info_t {
+ int bus;
+ int addr;
+ int pixfmt;
+ int (*detect)(struct display_info_t const *dev);
+ void (*enable)(struct display_info_t const *dev);
+ struct fb_videomode mode;
+};
+
+#ifdef CONFIG_IMX_HDMI
+extern int detect_hdmi(struct display_info_t const *dev);
+#endif
+
+#endif
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index e035d6a..585f1f7 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -11,7 +11,7 @@ lib-$(CONFIG_USE_PRIVATE_LIBGCC) += _ashldi3.o _ashrdi3.o _divsi3.o \
ifdef CONFIG_ARM64
obj-y += crt0_64.o
else
-obj-y += crt0.o
+obj-y += vectors.o crt0.o
endif
ifndef CONFIG_SPL_BUILD
diff --git a/arch/arm/lib/cache.c b/arch/arm/lib/cache.c
index 6cc136a..4f6b9f0 100644
--- a/arch/arm/lib/cache.c
+++ b/arch/arm/lib/cache.c
@@ -12,16 +12,23 @@
void __flush_cache(unsigned long start, unsigned long size)
{
#if defined(CONFIG_ARM1136)
- void arm1136_cache_flush(void);
- arm1136_cache_flush();
+#if !defined(CONFIG_SYS_ICACHE_OFF)
+ asm("mcr p15, 0, r1, c7, c5, 0"); /* invalidate I cache */
#endif
+
+#if !defined(CONFIG_SYS_DCACHE_OFF)
+ asm("mcr p15, 0, r1, c7, c14, 0"); /* Clean+invalidate D cache */
+#endif
+
+#endif /* CONFIG_ARM1136 */
+
#ifdef CONFIG_ARM926EJS
/* test and clean, page 2-23 of arm926ejs manual */
asm("0: mrc p15, 0, r15, c7, c10, 3\n\t" "bne 0b\n" : : : "memory");
/* disable write buffer as well (page 2-22) */
asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (0));
-#endif
+#endif /* CONFIG_ARM926EJS */
return;
}
void flush_cache(unsigned long start, unsigned long size)
diff --git a/arch/arm/lib/vectors.S b/arch/arm/lib/vectors.S
new file mode 100644
index 0000000..d68cc47
--- /dev/null
+++ b/arch/arm/lib/vectors.S
@@ -0,0 +1,291 @@
+/*
+ * vectors - Generic ARM exception table code
+ *
+ * Copyright (c) 1998 Dan Malek <dmalek@jlc.net>
+ * Copyright (c) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
+ * Copyright (c) 2000 Wolfgang Denk <wd@denx.de>
+ * Copyright (c) 2001 Alex Züpke <azu@sysgo.de>
+ * Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
+ * Copyright (c) 2002 Alex Züpke <azu@sysgo.de>
+ * Copyright (c) 2002 Gary Jennejohn <garyj@denx.de>
+ * Copyright (c) 2002 Kyle Harris <kharris@nexus-tech.net>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/*
+ *************************************************************************
+ *
+ * Symbol _start is referenced elsewhere, so make it global
+ *
+ *************************************************************************
+ */
+
+.globl _start
+
+/*
+ *************************************************************************
+ *
+ * Vectors have their own section so linker script can map them easily
+ *
+ *************************************************************************
+ */
+
+ .section ".vectors", "x"
+
+/*
+ *************************************************************************
+ *
+ * Exception vectors as described in ARM reference manuals
+ *
+ * Uses indirect branch to allow reaching handlers anywhere in memory.
+ *
+ *************************************************************************
+ */
+
+_start:
+
+#ifdef CONFIG_SYS_DV_NOR_BOOT_CFG
+ .word CONFIG_SYS_DV_NOR_BOOT_CFG
+#endif
+
+_start:
+ ldr pc, _reset
+ ldr pc, _undefined_instruction
+ ldr pc, _software_interrupt
+ ldr pc, _prefetch_abort
+ ldr pc, _data_abort
+ ldr pc, _not_used
+ ldr pc, _irq
+ ldr pc, _fiq
+
+/*
+ *************************************************************************
+ *
+ * Indirect vectors table
+ *
+ * Symbols referenced here must be defined somewhere else
+ *
+ *************************************************************************
+ */
+
+ .globl _undefined_instruction
+ .globl _software_interrupt
+ .globl _prefetch_abort
+ .globl _data_abort
+ .globl _not_used
+ .globl _irq
+ .globl _fiq
+
+_reset: .word reset
+_undefined_instruction: .word undefined_instruction
+_software_interrupt: .word software_interrupt
+_prefetch_abort: .word prefetch_abort
+_data_abort: .word data_abort
+_not_used: .word not_used
+_irq: .word irq
+_fiq: .word fiq
+
+ .balignl 16,0xdeadbeef
+
+/*
+ *************************************************************************
+ *
+ * Interrupt handling
+ *
+ *************************************************************************
+ */
+
+/* SPL interrupt handling: just hang */
+
+#ifdef CONFIG_SPL_BUILD
+
+ .align 5
+undefined_instruction:
+software_interrupt:
+prefetch_abort:
+data_abort:
+not_used:
+irq:
+fiq:
+
+1:
+ bl 1b /* hang and never return */
+
+#else /* !CONFIG_SPL_BUILD */
+
+/* IRQ stack memory (calculated at run-time) + 8 bytes */
+.globl IRQ_STACK_START_IN
+IRQ_STACK_START_IN:
+ .word 0x0badc0de
+
+#ifdef CONFIG_USE_IRQ
+/* IRQ stack memory (calculated at run-time) */
+.globl IRQ_STACK_START
+IRQ_STACK_START:
+ .word 0x0badc0de
+
+/* IRQ stack memory (calculated at run-time) */
+.globl FIQ_STACK_START
+FIQ_STACK_START:
+ .word 0x0badc0de
+
+#endif /* CONFIG_USE_IRQ */
+
+@
+@ IRQ stack frame.
+@
+#define S_FRAME_SIZE 72
+
+#define S_OLD_R0 68
+#define S_PSR 64
+#define S_PC 60
+#define S_LR 56
+#define S_SP 52
+
+#define S_IP 48
+#define S_FP 44
+#define S_R10 40
+#define S_R9 36
+#define S_R8 32
+#define S_R7 28
+#define S_R6 24
+#define S_R5 20
+#define S_R4 16
+#define S_R3 12
+#define S_R2 8
+#define S_R1 4
+#define S_R0 0
+
+#define MODE_SVC 0x13
+#define I_BIT 0x80
+
+/*
+ * use bad_save_user_regs for abort/prefetch/undef/swi ...
+ * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
+ */
+
+ .macro bad_save_user_regs
+ @ carve out a frame on current user stack
+ sub sp, sp, #S_FRAME_SIZE
+ stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12
+ ldr r2, IRQ_STACK_START_IN
+ @ get values for "aborted" pc and cpsr (into parm regs)
+ ldmia r2, {r2 - r3}
+ add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack
+ add r5, sp, #S_SP
+ mov r1, lr
+ stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr
+ mov r0, sp @ save current stack into r0 (param register)
+ .endm
+
+ .macro irq_save_user_regs
+ sub sp, sp, #S_FRAME_SIZE
+ stmia sp, {r0 - r12} @ Calling r0-r12
+ @ !!!! R8 NEEDS to be saved !!!! a reserved stack spot would be good.
+ add r8, sp, #S_PC
+ stmdb r8, {sp, lr}^ @ Calling SP, LR
+ str lr, [r8, #0] @ Save calling PC
+ mrs r6, spsr
+ str r6, [r8, #4] @ Save CPSR
+ str r0, [r8, #8] @ Save OLD_R0
+ mov r0, sp
+ .endm
+
+ .macro irq_restore_user_regs
+ ldmia sp, {r0 - lr}^ @ Calling r0 - lr
+ mov r0, r0
+ ldr lr, [sp, #S_PC] @ Get PC
+ add sp, sp, #S_FRAME_SIZE
+ subs pc, lr, #4 @ return & move spsr_svc into cpsr
+ .endm
+
+ .macro get_bad_stack
+ ldr r13, IRQ_STACK_START_IN @ setup our mode stack
+
+ str lr, [r13] @ save caller lr in position 0 of saved stack
+ mrs lr, spsr @ get the spsr
+ str lr, [r13, #4] @ save spsr in position 1 of saved stack
+ mov r13, #MODE_SVC @ prepare SVC-Mode
+ @ msr spsr_c, r13
+ msr spsr, r13 @ switch modes, make sure moves will execute
+ mov lr, pc @ capture return pc
+ movs pc, lr @ jump to next instruction & switch modes.
+ .endm
+
+ .macro get_irq_stack @ setup IRQ stack
+ ldr sp, IRQ_STACK_START
+ .endm
+
+ .macro get_fiq_stack @ setup FIQ stack
+ ldr sp, FIQ_STACK_START
+ .endm
+
+/*
+ * exception handlers
+ */
+
+ .align 5
+undefined_instruction:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_undefined_instruction
+
+ .align 5
+software_interrupt:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_software_interrupt
+
+ .align 5
+prefetch_abort:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_prefetch_abort
+
+ .align 5
+data_abort:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_data_abort
+
+ .align 5
+not_used:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_not_used
+
+#ifdef CONFIG_USE_IRQ
+
+ .align 5
+irq:
+ get_irq_stack
+ irq_save_user_regs
+ bl do_irq
+ irq_restore_user_regs
+
+ .align 5
+fiq:
+ get_fiq_stack
+ /* someone ought to write a more effiction fiq_save_user_regs */
+ irq_save_user_regs
+ bl do_fiq
+ irq_restore_user_regs
+
+#else
+
+ .align 5
+irq:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_irq
+
+ .align 5
+fiq:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_fiq
+
+#endif /* CONFIG_USE_IRQ */
+
+#endif /* CONFIG_SPL_BUILD */
diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c
index d9c05b0..84294db 100644
--- a/board/boundary/nitrogen6x/nitrogen6x.c
+++ b/board/boundary/nitrogen6x/nitrogen6x.c
@@ -19,13 +19,12 @@
#include <asm/imx-common/mxc_i2c.h>
#include <asm/imx-common/sata.h>
#include <asm/imx-common/boot_mode.h>
+#include <asm/imx-common/video.h>
#include <mmc.h>
#include <fsl_esdhc.h>
#include <micrel.h>
#include <miiphy.h>
#include <netdev.h>
-#include <linux/fb.h>
-#include <ipu_pixfmt.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/mxc_hdmi.h>
#include <i2c.h>
@@ -331,7 +330,7 @@ int board_mmc_init(bd_t *bis)
#ifdef CONFIG_MXC_SPI
iomux_v3_cfg_t const ecspi1_pads[] = {
/* SS1 */
- MX6_PAD_EIM_D19__GPIO3_IO19 | MUX_PAD_CTRL(SPI_PAD_CTRL),
+ MX6_PAD_EIM_D19__GPIO3_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL),
MX6_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
MX6_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL),
MX6_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),
@@ -446,22 +445,6 @@ static iomux_v3_cfg_t const rgb_pads[] = {
MX6_PAD_DISP0_DAT23__IPU1_DISP0_DATA23,
};
-struct display_info_t {
- int bus;
- int addr;
- int pixfmt;
- int (*detect)(struct display_info_t const *dev);
- void (*enable)(struct display_info_t const *dev);
- struct fb_videomode mode;
-};
-
-
-static int detect_hdmi(struct display_info_t const *dev)
-{
- struct hdmi_regs *hdmi = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR;
- return readb(&hdmi->phy_stat0) & HDMI_DVI_STAT;
-}
-
static void do_enable_hdmi(struct display_info_t const *dev)
{
imx_enable_hdmi_phy();
@@ -492,7 +475,7 @@ static void enable_rgb(struct display_info_t const *dev)
gpio_direction_output(RGB_BACKLIGHT_GP, 1);
}
-static struct display_info_t const displays[] = {{
+struct display_info_t const displays[] = {{
.bus = -1,
.addr = 0,
.pixfmt = IPU_PIX_FMT_RGB24,
@@ -573,51 +556,7 @@ static struct display_info_t const displays[] = {{
.sync = 0,
.vmode = FB_VMODE_NONINTERLACED
} } };
-
-int board_video_skip(void)
-{
- int i;
- int ret;
- char const *panel = getenv("panel");
- if (!panel) {
- for (i = 0; i < ARRAY_SIZE(displays); i++) {
- struct display_info_t const *dev = displays+i;
- if (dev->detect(dev)) {
- panel = dev->mode.name;
- printf("auto-detected panel %s\n", panel);
- break;
- }
- }
- if (!panel) {
- panel = displays[0].mode.name;
- printf("No panel detected: default to %s\n", panel);
- i = 0;
- }
- } else {
- for (i = 0; i < ARRAY_SIZE(displays); i++) {
- if (!strcmp(panel, displays[i].mode.name))
- break;
- }
- }
- if (i < ARRAY_SIZE(displays)) {
- ret = ipuv3_fb_init(&displays[i].mode, 0,
- displays[i].pixfmt);
- if (!ret) {
- displays[i].enable(displays+i);
- printf("Display: %s (%ux%u)\n",
- displays[i].mode.name,
- displays[i].mode.xres,
- displays[i].mode.yres);
- } else {
- printf("LCD %s cannot be configured: %d\n",
- displays[i].mode.name, ret);
- }
- } else {
- printf("unsupported panel %s\n", panel);
- ret = -EINVAL;
- }
- return (0 != ret);
-}
+size_t display_count = ARRAY_SIZE(displays);
static void setup_display(void)
{
diff --git a/board/compulab/cm_t335/u-boot.lds b/board/compulab/cm_t335/u-boot.lds
index 0984dfe..c8ab716 100644
--- a/board/compulab/cm_t335/u-boot.lds
+++ b/board/compulab/cm_t335/u-boot.lds
@@ -18,6 +18,7 @@ SECTIONS
.text :
{
*(.__image_copy_start)
+ *(.vectors)
CPUDIR/start.o (.text*)
board/compulab/cm_t335/built-in.o (.text*)
*(.text*)
diff --git a/board/embest/mx6boards/Makefile b/board/embest/mx6boards/Makefile
new file mode 100644
index 0000000..467fb50
--- /dev/null
+++ b/board/embest/mx6boards/Makefile
@@ -0,0 +1,9 @@
+#
+# Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
+#
+# (C) Copyright 2011 Freescale Semiconductor, Inc.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y := mx6boards.o
diff --git a/board/embest/mx6boards/mx6boards.c b/board/embest/mx6boards/mx6boards.c
new file mode 100644
index 0000000..d06b57d
--- /dev/null
+++ b/board/embest/mx6boards/mx6boards.c
@@ -0,0 +1,601 @@
+/*
+ * Copyright (C) 2014 Eukréa Electromatique
+ * Author: Eric Bénard <eric@eukrea.com>
+ * Fabio Estevam <fabio.estevam@freescale.com>
+ * Jon Nettleton <jon.nettleton@gmail.com>
+ *
+ * based on sabresd.c which is :
+ * Copyright (C) 2012 Freescale Semiconductor, Inc.
+ * and on hummingboard.c which is :
+ * Copyright (C) 2013 SolidRun ltd.
+ * Copyright (C) 2013 Jon Nettleton <jon.nettleton@gmail.com>.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/errno.h>
+#include <asm/gpio.h>
+#include <asm/imx-common/iomux-v3.h>
+#include <asm/imx-common/boot_mode.h>
+#include <asm/imx-common/mxc_i2c.h>
+#include <asm/imx-common/video.h>
+#include <i2c.h>
+#include <mmc.h>
+#include <fsl_esdhc.h>
+#include <miiphy.h>
+#include <netdev.h>
+#include <asm/arch/mxc_hdmi.h>
+#include <asm/arch/crm_regs.h>
+#include <linux/fb.h>
+#include <ipu_pixfmt.h>
+#include <asm/io.h>
+#include <asm/arch/sys_proto.h>
+DECLARE_GLOBAL_DATA_PTR;
+
+#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
+ PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
+#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \
+ PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \
+ PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+
+#define USDHC_PAD_CLK_CTRL (PAD_CTL_SPEED_LOW | \
+ PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | \
+ PAD_CTL_HYS)
+
+#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
+
+#define ENET_PAD_CTRL_PD (PAD_CTL_PUS_100K_DOWN | \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
+
+#define ENET_PAD_CTRL_CLK ((PAD_CTL_PUS_100K_UP & ~PAD_CTL_PKE) | \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
+
+#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
+ PAD_CTL_ODE | PAD_CTL_SRE_FAST)
+
+#define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \
+ PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
+
+static int board_type = -1;
+#define BOARD_IS_MARSBOARD 0
+#define BOARD_IS_RIOTBOARD 1
+
+int dram_init(void)
+{
+ gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
+
+ return 0;
+}
+
+static iomux_v3_cfg_t const uart2_pads[] = {
+ MX6_PAD_EIM_D26__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
+ MX6_PAD_EIM_D27__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+static void setup_iomux_uart(void)
+{
+ imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads));
+}
+
+iomux_v3_cfg_t const enet_pads[] = {
+ MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ /* GPIO16 -> AR8035 25MHz */
+ MX6_PAD_GPIO_16__ENET_REF_CLK | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ /* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
+ MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL_CLK),
+ MX6_PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL_PD),
+ MX6_PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL_PD),
+ MX6_PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+ MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL_PD),
+ /* AR8035 PHY Reset */
+ MX6_PAD_EIM_D31__GPIO3_IO31 | MUX_PAD_CTRL(ENET_PAD_CTRL_PD),
+ /* AR8035 PHY Interrupt */
+ MX6_PAD_ENET_TX_EN__GPIO1_IO28 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+};
+
+static void setup_iomux_enet(void)
+{
+ imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads));
+
+ /* Reset AR8035 PHY */
+ gpio_direction_output(IMX_GPIO_NR(3, 31) , 0);
+ mdelay(2);
+ gpio_set_value(IMX_GPIO_NR(3, 31), 1);
+}
+
+int mx6_rgmii_rework(struct phy_device *phydev)
+{
+ /* from linux/arch/arm/mach-imx/mach-imx6q.c :
+ * Ar803x phy SmartEEE feature cause link status generates glitch,
+ * which cause ethernet link down/up issue, so disable SmartEEE
+ */
+ phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x7);
+ phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x805d);
+ phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x4003);
+
+ return 0;
+}
+
+int board_phy_config(struct phy_device *phydev)
+{
+ mx6_rgmii_rework(phydev);
+
+ if (phydev->drv->config)
+ phydev->drv->config(phydev);
+
+ return 0;
+}
+
+iomux_v3_cfg_t const usdhc2_pads[] = {
+ MX6_PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CLK_CTRL),
+ MX6_PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL), /* WP */
+ MX6_PAD_GPIO_4__GPIO1_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
+};
+
+iomux_v3_cfg_t const usdhc3_pads[] = {
+ MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CLK_CTRL),
+ MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+};
+
+iomux_v3_cfg_t const riotboard_usdhc3_pads[] = {
+ MX6_PAD_SD3_DAT4__GPIO7_IO01 | MUX_PAD_CTRL(NO_PAD_CTRL), /* WP */
+ MX6_PAD_SD3_DAT5__GPIO7_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
+};
+
+iomux_v3_cfg_t const usdhc4_pads[] = {
+ MX6_PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(USDHC_PAD_CLK_CTRL),
+ MX6_PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT1__SD4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT2__SD4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ MX6_PAD_SD4_DAT3__SD4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+ /* eMMC RST */
+ MX6_PAD_NANDF_ALE__GPIO6_IO08 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+#ifdef CONFIG_FSL_ESDHC
+struct fsl_esdhc_cfg usdhc_cfg[3] = {
+ {USDHC2_BASE_ADDR},
+ {USDHC3_BASE_ADDR},
+ {USDHC4_BASE_ADDR},
+};
+
+#define USDHC2_CD_GPIO IMX_GPIO_NR(1, 4)
+#define USDHC3_CD_GPIO IMX_GPIO_NR(7, 0)
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+ struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+ int ret = 0;
+
+ switch (cfg->esdhc_base) {
+ case USDHC2_BASE_ADDR:
+ ret = !gpio_get_value(USDHC2_CD_GPIO);
+ break;
+ case USDHC3_BASE_ADDR:
+ if (board_type == BOARD_IS_RIOTBOARD)
+ ret = !gpio_get_value(USDHC3_CD_GPIO);
+ else if (board_type == BOARD_IS_MARSBOARD)
+ ret = 1; /* eMMC/uSDHC3 is always present */
+ break;
+ case USDHC4_BASE_ADDR:
+ ret = 1; /* eMMC/uSDHC4 is always present */
+ break;
+ }
+
+ return ret;
+}
+
+int board_mmc_init(bd_t *bis)
+{
+ s32 status = 0;
+ int i;
+
+ /*
+ * According to the board_mmc_init() the following map is done:
+ * (U-boot device node) (Physical Port)
+ * ** RiOTboard :
+ * mmc0 SDCard slot (bottom)
+ * mmc1 uSDCard slot (top)
+ * mmc2 eMMC
+ * ** MarSBoard :
+ * mmc0 uSDCard slot (bottom)
+ * mmc1 eMMC
+ */
+ for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
+ switch (i) {
+ case 0:
+ imx_iomux_v3_setup_multiple_pads(
+ usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
+ gpio_direction_input(USDHC2_CD_GPIO);
+ usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+ usdhc_cfg[0].max_bus_width = 4;
+ break;
+ case 1:
+ imx_iomux_v3_setup_multiple_pads(
+ usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
+ if (board_type == BOARD_IS_RIOTBOARD) {
+ imx_iomux_v3_setup_multiple_pads(
+ riotboard_usdhc3_pads,
+ ARRAY_SIZE(riotboard_usdhc3_pads));
+ gpio_direction_input(USDHC3_CD_GPIO);
+ gpio_direction_output(IMX_GPIO_NR(7, 8) , 0);
+ udelay(250);
+ gpio_set_value(IMX_GPIO_NR(7, 8), 1);
+ }
+ usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
+ usdhc_cfg[1].max_bus_width = 4;
+ break;
+ case 2:
+ imx_iomux_v3_setup_multiple_pads(
+ usdhc4_pads, ARRAY_SIZE(usdhc4_pads));
+ usdhc_cfg[2].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
+ usdhc_cfg[2].max_bus_width = 4;
+ gpio_direction_output(IMX_GPIO_NR(6, 8) , 0);
+ udelay(250);
+ gpio_set_value(IMX_GPIO_NR(6, 8), 1);
+ break;
+ default:
+ printf("Warning: you configured more USDHC controllers"
+ "(%d) then supported by the board (%d)\n",
+ i + 1, CONFIG_SYS_FSL_USDHC_NUM);
+ return status;
+ }
+
+ status |= fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
+ }
+
+ return status;
+}
+#endif
+
+#ifdef CONFIG_MXC_SPI
+iomux_v3_cfg_t const ecspi1_pads[] = {
+ MX6_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),
+ MX6_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
+ MX6_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL),
+ MX6_PAD_EIM_EB2__GPIO2_IO30 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+static void setup_spi(void)
+{
+ imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads));
+}
+#endif
+
+struct i2c_pads_info i2c_pad_info1 = {
+ .scl = {
+ .i2c_mode = MX6_PAD_CSI0_DAT9__I2C1_SCL
+ | MUX_PAD_CTRL(I2C_PAD_CTRL),
+ .gpio_mode = MX6_PAD_CSI0_DAT9__GPIO5_IO27
+ | MUX_PAD_CTRL(I2C_PAD_CTRL),
+ .gp = IMX_GPIO_NR(5, 27)
+ },
+ .sda = {
+ .i2c_mode = MX6_PAD_CSI0_DAT8__I2C1_SDA
+ | MUX_PAD_CTRL(I2C_PAD_CTRL),
+ .gpio_mode = MX6_PAD_CSI0_DAT8__GPIO5_IO26
+ | MUX_PAD_CTRL(I2C_PAD_CTRL),
+ .gp = IMX_GPIO_NR(5, 26)
+ }
+};
+
+struct i2c_pads_info i2c_pad_info2 = {
+ .scl = {
+ .i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL
+ | MUX_PAD_CTRL(I2C_PAD_CTRL),
+ .gpio_mode = MX6_PAD_KEY_COL3__GPIO4_IO12
+ | MUX_PAD_CTRL(I2C_PAD_CTRL),
+ .gp = IMX_GPIO_NR(4, 12)
+ },
+ .sda = {
+ .i2c_mode = MX6_PAD_KEY_ROW3__I2C2_SDA
+ | MUX_PAD_CTRL(I2C_PAD_CTRL),
+ .gpio_mode = MX6_PAD_KEY_ROW3__GPIO4_IO13
+ | MUX_PAD_CTRL(I2C_PAD_CTRL),
+ .gp = IMX_GPIO_NR(4, 13)
+ }
+};
+
+struct i2c_pads_info i2c_pad_info3 = {
+ .scl = {
+ .i2c_mode = MX6_PAD_GPIO_5__I2C3_SCL
+ | MUX_PAD_CTRL(I2C_PAD_CTRL),
+ .gpio_mode = MX6_PAD_GPIO_5__GPIO1_IO05
+ | MUX_PAD_CTRL(I2C_PAD_CTRL),
+ .gp = IMX_GPIO_NR(1, 5)
+ },
+ .sda = {
+ .i2c_mode = MX6_PAD_GPIO_6__I2C3_SDA
+ | MUX_PAD_CTRL(I2C_PAD_CTRL),
+ .gpio_mode = MX6_PAD_GPIO_6__GPIO1_IO06
+ | MUX_PAD_CTRL(I2C_PAD_CTRL),
+ .gp = IMX_GPIO_NR(1, 6)
+ }
+};
+
+iomux_v3_cfg_t const tft_pads_riot[] = {
+ /* LCD_PWR_EN */
+ MX6_PAD_ENET_TXD1__GPIO1_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ /* TOUCH_INT */
+ MX6_PAD_NANDF_CS1__GPIO6_IO14 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ /* LED_PWR_EN */
+ MX6_PAD_NANDF_CS2__GPIO6_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ /* BL LEVEL */
+ MX6_PAD_SD1_CMD__GPIO1_IO18 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+iomux_v3_cfg_t const tft_pads_mars[] = {
+ /* LCD_PWR_EN */
+ MX6_PAD_ENET_TXD1__GPIO1_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ /* TOUCH_INT */
+ MX6_PAD_NANDF_CS1__GPIO6_IO14 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ /* LED_PWR_EN */
+ MX6_PAD_NANDF_CS2__GPIO6_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ /* BL LEVEL (PWM4) */
+ MX6_PAD_SD4_DAT2__GPIO2_IO10 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+#if defined(CONFIG_VIDEO_IPUV3)
+
+static void enable_lvds(struct display_info_t const *dev)
+{
+ struct iomuxc *iomux = (struct iomuxc *)
+ IOMUXC_BASE_ADDR;
+ setbits_le32(&iomux->gpr[2],
+ IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT);
+ /* set backlight level to ON */
+ if (board_type == BOARD_IS_RIOTBOARD)
+ gpio_direction_output(IMX_GPIO_NR(1, 18) , 1);
+ else if (board_type == BOARD_IS_MARSBOARD)
+ gpio_direction_output(IMX_GPIO_NR(2, 10) , 1);
+}
+
+static void disable_lvds(struct display_info_t const *dev)
+{
+ struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
+
+ /* set backlight level to OFF */
+ if (board_type == BOARD_IS_RIOTBOARD)
+ gpio_direction_output(IMX_GPIO_NR(1, 18) , 0);
+ else if (board_type == BOARD_IS_MARSBOARD)
+ gpio_direction_output(IMX_GPIO_NR(2, 10) , 0);
+
+ clrbits_le32(&iomux->gpr[2],
+ IOMUXC_GPR2_LVDS_CH0_MODE_MASK);
+}
+
+static void do_enable_hdmi(struct display_info_t const *dev)
+{
+ disable_lvds(dev);
+ imx_enable_hdmi_phy();
+}
+
+static int detect_i2c(struct display_info_t const *dev)
+{
+ return (0 == i2c_set_bus_num(dev->bus)) &&
+ (0 == i2c_probe(dev->addr));
+}
+
+struct display_info_t const displays[] = {{
+ .bus = -1,
+ .addr = 0,
+ .pixfmt = IPU_PIX_FMT_RGB24,
+ .detect = detect_hdmi,
+ .enable = do_enable_hdmi,
+ .mode = {
+ .name = "HDMI",
+ .refresh = 60,
+ .xres = 1024,
+ .yres = 768,
+ .pixclock = 15385,
+ .left_margin = 220,
+ .right_margin = 40,
+ .upper_margin = 21,
+ .lower_margin = 7,
+ .hsync_len = 60,
+ .vsync_len = 10,
+ .sync = FB_SYNC_EXT,
+ .vmode = FB_VMODE_NONINTERLACED
+} }, {
+ .bus = 2,
+ .addr = 0x1,
+ .pixfmt = IPU_PIX_FMT_LVDS666,
+ .detect = detect_i2c,
+ .enable = enable_lvds,
+ .mode = {
+ .name = "LCD8000-97C",
+ .refresh = 60,
+ .xres = 1024,
+ .yres = 768,
+ .pixclock = 15385,
+ .left_margin = 100,
+ .right_margin = 200,
+ .upper_margin = 10,
+ .lower_margin = 20,
+ .hsync_len = 20,
+ .vsync_len = 8,
+ .sync = FB_SYNC_EXT,
+ .vmode = FB_VMODE_NONINTERLACED
+} } };
+size_t display_count = ARRAY_SIZE(displays);
+
+static void setup_display(void)
+{
+ struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+ struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
+ int reg;
+
+ enable_ipu_clock();
+ imx_setup_hdmi();
+
+ /* Turn on LDB0, IPU,IPU DI0 clocks */
+ setbits_le32(&mxc_ccm->CCGR3,
+ MXC_CCM_CCGR3_LDB_DI0_MASK);
+
+ /* set LDB0 clk select to 011/011 */
+ clrsetbits_le32(&mxc_ccm->cs2cdr,
+ MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK,
+ (3 << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET));
+
+ setbits_le32(&mxc_ccm->cscmr2,
+ MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV);
+
+ setbits_le32(&mxc_ccm->chsccdr,
+ (CHSCCDR_CLK_SEL_LDB_DI0
+ << MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET));
+
+ reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES
+ | IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW
+ | IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG
+ | IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT
+ | IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG
+ | IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT
+ | IOMUXC_GPR2_LVDS_CH1_MODE_DISABLED
+ | IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0;
+ writel(reg, &iomux->gpr[2]);
+
+ clrsetbits_le32(&iomux->gpr[3],
+ IOMUXC_GPR3_LVDS0_MUX_CTL_MASK |
+ IOMUXC_GPR3_HDMI_MUX_CTL_MASK,
+ IOMUXC_GPR3_MUX_SRC_IPU1_DI0
+ << IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET);
+}
+#endif /* CONFIG_VIDEO_IPUV3 */
+
+/*
+ * Do not overwrite the console
+ * Use always serial for U-Boot console
+ */
+int overwrite_console(void)
+{
+ return 1;
+}
+
+int board_eth_init(bd_t *bis)
+{
+ setup_iomux_enet();
+
+ return cpu_eth_init(bis);
+}
+
+int board_early_init_f(void)
+{
+ u32 cputype = cpu_type(get_cpu_rev());
+
+ switch (cputype) {
+ case MXC_CPU_MX6SOLO:
+ board_type = BOARD_IS_RIOTBOARD;
+ break;
+ case MXC_CPU_MX6D:
+ board_type = BOARD_IS_MARSBOARD;
+ break;
+ }
+
+ setup_iomux_uart();
+
+ if (board_type == BOARD_IS_RIOTBOARD)
+ imx_iomux_v3_setup_multiple_pads(
+ tft_pads_riot, ARRAY_SIZE(tft_pads_riot));
+ else if (board_type == BOARD_IS_MARSBOARD)
+ imx_iomux_v3_setup_multiple_pads(
+ tft_pads_mars, ARRAY_SIZE(tft_pads_mars));
+#if defined(CONFIG_VIDEO_IPUV3)
+ /* power ON LCD */
+ gpio_direction_output(IMX_GPIO_NR(1, 29) , 1);
+ /* touch interrupt is an input */
+ gpio_direction_input(IMX_GPIO_NR(6, 14));
+ /* power ON backlight */
+ gpio_direction_output(IMX_GPIO_NR(6, 15) , 1);
+ /* set backlight level to off */
+ if (board_type == BOARD_IS_RIOTBOARD)
+ gpio_direction_output(IMX_GPIO_NR(1, 18) , 0);
+ else if (board_type == BOARD_IS_MARSBOARD)
+ gpio_direction_output(IMX_GPIO_NR(2, 10) , 0);
+ setup_display();
+#endif
+
+ return 0;
+}
+
+int board_init(void)
+{
+ /* address of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+ /* i2c1 : PMIC, Audio codec on RiOT, Expansion connector on MarS */
+ setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
+ /* i2c2 : HDMI EDID */
+ setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
+ /* i2c3 : LVDS, Expansion connector */
+ setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info3);
+#ifdef CONFIG_MXC_SPI
+ setup_spi();
+#endif
+ return 0;
+}
+
+#ifdef CONFIG_CMD_BMODE
+static const struct boot_mode riotboard_boot_modes[] = {
+ {"sd2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
+ {"sd3", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)},
+ {"emmc", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)},
+ {NULL, 0},
+};
+static const struct boot_mode marsboard_boot_modes[] = {
+ {"sd2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
+ {"emmc", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)},
+ {NULL, 0},
+};
+#endif
+
+int board_late_init(void)
+{
+#ifdef CONFIG_CMD_BMODE
+ if (board_type == BOARD_IS_RIOTBOARD)
+ add_board_boot_modes(riotboard_boot_modes);
+ else if (board_type == BOARD_IS_RIOTBOARD)
+ add_board_boot_modes(marsboard_boot_modes);
+#endif
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ puts("Board: ");
+ if (board_type == BOARD_IS_MARSBOARD)
+ puts("MarSBoard\n");
+ else if (board_type == BOARD_IS_RIOTBOARD)
+ puts("RIoTboard\n");
+ else
+ printf("unknown - cputype : %02x\n", cpu_type(get_cpu_rev()));
+
+ return 0;
+}
diff --git a/board/freescale/mx31ads/u-boot.lds b/board/freescale/mx31ads/u-boot.lds
index 6da1d4b..61b83bf 100644
--- a/board/freescale/mx31ads/u-boot.lds
+++ b/board/freescale/mx31ads/u-boot.lds
@@ -22,6 +22,7 @@ SECTIONS
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
+ * (.vectors)
arch/arm/cpu/arm1136/start.o (.text*)
board/freescale/mx31ads/built-in.o (.text*)
arch/arm/lib/built-in.o (.text*)
diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c
index d7d932e..3e314da 100644
--- a/board/freescale/mx6sabresd/mx6sabresd.c
+++ b/board/freescale/mx6sabresd/mx6sabresd.c
@@ -14,14 +14,13 @@
#include <asm/gpio.h>
#include <asm/imx-common/iomux-v3.h>
#include <asm/imx-common/boot_mode.h>
+#include <asm/imx-common/video.h>
#include <mmc.h>
#include <fsl_esdhc.h>
#include <miiphy.h>
#include <netdev.h>
#include <asm/arch/mxc_hdmi.h>
#include <asm/arch/crm_regs.h>
-#include <linux/fb.h>
-#include <ipu_pixfmt.h>
#include <asm/io.h>
#include <asm/arch/sys_proto.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -265,22 +264,6 @@ int board_phy_config(struct phy_device *phydev)
}
#if defined(CONFIG_VIDEO_IPUV3)
-struct display_info_t {
- int bus;
- int addr;
- int pixfmt;
- int (*detect)(struct display_info_t const *dev);
- void (*enable)(struct display_info_t const *dev);
- struct fb_videomode mode;
-};
-
-static int detect_hdmi(struct display_info_t const *dev)
-{
- struct hdmi_regs *hdmi = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR;
- return readb(&hdmi->phy_stat0) & HDMI_DVI_STAT;
-}
-
-
static void disable_lvds(struct display_info_t const *dev)
{
struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
@@ -309,7 +292,7 @@ static void enable_lvds(struct display_info_t const *dev)
writel(reg, &iomux->gpr[2]);
}
-static struct display_info_t const displays[] = {{
+struct display_info_t const displays[] = {{
.bus = -1,
.addr = 0,
.pixfmt = IPU_PIX_FMT_RGB666,
@@ -350,51 +333,7 @@ static struct display_info_t const displays[] = {{
.sync = FB_SYNC_EXT,
.vmode = FB_VMODE_NONINTERLACED
} } };
-
-int board_video_skip(void)
-{
- int i;
- int ret;
- char const *panel = getenv("panel");
- if (!panel) {
- for (i = 0; i < ARRAY_SIZE(displays); i++) {
- struct display_info_t const *dev = displays+i;
- if (dev->detect && dev->detect(dev)) {
- panel = dev->mode.name;
- printf("auto-detected panel %s\n", panel);
- break;
- }
- }
- if (!panel) {
- panel = displays[0].mode.name;
- printf("No panel detected: default to %s\n", panel);
- i = 0;
- }
- } else {
- for (i = 0; i < ARRAY_SIZE(displays); i++) {
- if (!strcmp(panel, displays[i].mode.name))
- break;
- }
- }
- if (i < ARRAY_SIZE(displays)) {
- ret = ipuv3_fb_init(&displays[i].mode, 0,
- displays[i].pixfmt);
- if (!ret) {
- displays[i].enable(displays+i);
- printf("Display: %s (%ux%u)\n",
- displays[i].mode.name,
- displays[i].mode.xres,
- displays[i].mode.yres);
- } else
- printf("LCD %s cannot be configured: %d\n",
- displays[i].mode.name, ret);
- } else {
- printf("unsupported panel %s\n", panel);
- return -EINVAL;
- }
-
- return 0;
-}
+size_t display_count = ARRAY_SIZE(displays);
static void setup_display(void)
{
diff --git a/board/freescale/mx6slevk/mx6slevk.c b/board/freescale/mx6slevk/mx6slevk.c
index aadad32..d2b64cc 100644
--- a/board/freescale/mx6slevk/mx6slevk.c
+++ b/board/freescale/mx6slevk/mx6slevk.c
@@ -34,6 +34,9 @@ DECLARE_GLOBAL_DATA_PTR;
PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
+#define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \
+ PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
+
#define ETH_PHY_RESET IMX_GPIO_NR(4, 21)
int dram_init(void)
@@ -71,6 +74,20 @@ static iomux_v3_cfg_t const fec_pads[] = {
MX6_PAD_FEC_TX_CLK__GPIO_4_21 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
+#ifdef CONFIG_MXC_SPI
+static iomux_v3_cfg_t ecspi1_pads[] = {
+ MX6_PAD_ECSPI1_MISO__ECSPI_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
+ MX6_PAD_ECSPI1_MOSI__ECSPI_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL),
+ MX6_PAD_ECSPI1_SCLK__ECSPI_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),
+ MX6_PAD_ECSPI1_SS0__GPIO4_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+static void setup_spi(void)
+{
+ imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads));
+}
+#endif
+
static void setup_iomux_uart(void)
{
imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
@@ -132,6 +149,9 @@ static int setup_fec(void)
int board_early_init_f(void)
{
setup_iomux_uart();
+#ifdef CONFIG_MXC_SPI
+ setup_spi();
+#endif
return 0;
}
diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c
index c130e2c..031367d 100644
--- a/board/gateworks/gw_ventana/gw_ventana.c
+++ b/board/gateworks/gw_ventana/gw_ventana.c
@@ -12,6 +12,7 @@
#include <asm/arch/imx-regs.h>
#include <asm/arch/iomux.h>
#include <asm/arch/mx6-pins.h>
+#include <asm/arch/mxc_hdmi.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/sys_proto.h>
#include <asm/gpio.h>
@@ -19,6 +20,7 @@
#include <asm/imx-common/mxc_i2c.h>
#include <asm/imx-common/boot_mode.h>
#include <asm/imx-common/sata.h>
+#include <asm/imx-common/video.h>
#include <jffs2/load_kernel.h>
#include <hwconfig.h>
#include <i2c.h>
@@ -30,8 +32,8 @@
#include <mtd_node.h>
#include <netdev.h>
#include <power/pmic.h>
+#include <power/ltc3676_pmic.h>
#include <power/pfuze100_pmic.h>
-#include <i2c.h>
#include <fdt_support.h>
#include <jffs2/load_kernel.h>
#include <spi_flash.h>
@@ -369,6 +371,134 @@ int board_eth_init(bd_t *bis)
return 0;
}
+#if defined(CONFIG_VIDEO_IPUV3)
+
+static void enable_hdmi(struct display_info_t const *dev)
+{
+ imx_enable_hdmi_phy();
+}
+
+static int detect_i2c(struct display_info_t const *dev)
+{
+ return i2c_set_bus_num(dev->bus) == 0 &&
+ i2c_probe(dev->addr) == 0;
+}
+
+static void enable_lvds(struct display_info_t const *dev)
+{
+ struct iomuxc *iomux = (struct iomuxc *)
+ IOMUXC_BASE_ADDR;
+
+ /* set CH0 data width to 24bit (IOMUXC_GPR2:5 0=18bit, 1=24bit) */
+ u32 reg = readl(&iomux->gpr[2]);
+ reg |= IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT;
+ writel(reg, &iomux->gpr[2]);
+
+ /* Enable Backlight */
+ imx_iomux_v3_setup_pad(MX6_PAD_SD1_CMD__GPIO1_IO18 |
+ MUX_PAD_CTRL(NO_PAD_CTRL));
+ gpio_direction_output(IMX_GPIO_NR(1, 18), 1);
+}
+
+struct display_info_t const displays[] = {{
+ /* HDMI Output */
+ .bus = -1,
+ .addr = 0,
+ .pixfmt = IPU_PIX_FMT_RGB24,
+ .detect = detect_hdmi,
+ .enable = enable_hdmi,
+ .mode = {
+ .name = "HDMI",
+ .refresh = 60,
+ .xres = 1024,
+ .yres = 768,
+ .pixclock = 15385,
+ .left_margin = 220,
+ .right_margin = 40,
+ .upper_margin = 21,
+ .lower_margin = 7,
+ .hsync_len = 60,
+ .vsync_len = 10,
+ .sync = FB_SYNC_EXT,
+ .vmode = FB_VMODE_NONINTERLACED
+} }, {
+ /* Freescale MXC-LVDS1: HannStar HSD100PXN1-A00 w/ egalx_ts cont */
+ .bus = 2,
+ .addr = 0x4,
+ .pixfmt = IPU_PIX_FMT_LVDS666,
+ .detect = detect_i2c,
+ .enable = enable_lvds,
+ .mode = {
+ .name = "Hannstar-XGA",
+ .refresh = 60,
+ .xres = 1024,
+ .yres = 768,
+ .pixclock = 15385,
+ .left_margin = 220,
+ .right_margin = 40,
+ .upper_margin = 21,
+ .lower_margin = 7,
+ .hsync_len = 60,
+ .vsync_len = 10,
+ .sync = FB_SYNC_EXT,
+ .vmode = FB_VMODE_NONINTERLACED
+} } };
+size_t display_count = ARRAY_SIZE(displays);
+
+static void setup_display(void)
+{
+ struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+ struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
+ int reg;
+
+ enable_ipu_clock();
+ imx_setup_hdmi();
+ /* Turn on LDB0,IPU,IPU DI0 clocks */
+ reg = __raw_readl(&mxc_ccm->CCGR3);
+ reg |= MXC_CCM_CCGR3_LDB_DI0_MASK;
+ writel(reg, &mxc_ccm->CCGR3);
+
+ /* set LDB0, LDB1 clk select to 011/011 */
+ reg = readl(&mxc_ccm->cs2cdr);
+ reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK
+ |MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK);
+ reg |= (3<<MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET)
+ |(3<<MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET);
+ writel(reg, &mxc_ccm->cs2cdr);
+
+ reg = readl(&mxc_ccm->cscmr2);
+ reg |= MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV;
+ writel(reg, &mxc_ccm->cscmr2);
+
+ reg = readl(&mxc_ccm->chsccdr);
+ reg |= (CHSCCDR_CLK_SEL_LDB_DI0
+ <<MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET);
+ writel(reg, &mxc_ccm->chsccdr);
+
+ reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES
+ |IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_HIGH
+ |IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW
+ |IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG
+ |IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT
+ |IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG
+ |IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT
+ |IOMUXC_GPR2_LVDS_CH1_MODE_DISABLED
+ |IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0;
+ writel(reg, &iomux->gpr[2]);
+
+ reg = readl(&iomux->gpr[3]);
+ reg = (reg & ~IOMUXC_GPR3_LVDS0_MUX_CTL_MASK)
+ | (IOMUXC_GPR3_MUX_SRC_IPU1_DI0
+ <<IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET);
+ writel(reg, &iomux->gpr[3]);
+
+ /* Backlight CABEN on LVDS connector */
+ imx_iomux_v3_setup_pad(MX6_PAD_SD2_CLK__GPIO1_IO10 |
+ MUX_PAD_CTRL(NO_PAD_CTRL));
+ gpio_direction_output(IMX_GPIO_NR(1, 10), 0);
+}
+#endif /* CONFIG_VIDEO_IPUV3 */
+
/* read ventana EEPROM, check for validity, and return baseboard type */
static int
read_eeprom(void)
@@ -733,6 +863,62 @@ struct ventana gpio_cfg[] = {
},
};
+/* setup board specific PMIC */
+int power_init_board(void)
+{
+ struct pmic *p;
+ u32 reg;
+
+ /* configure PFUZE100 PMIC */
+ if (board_type == GW54xx || board_type == GW54proto) {
+ power_pfuze100_init(I2C_PMIC);
+ p = pmic_get("PFUZE100_PMIC");
+ if (p && !pmic_probe(p)) {
+ pmic_reg_read(p, PFUZE100_DEVICEID, &reg);
+ printf("PMIC: PFUZE100 ID=0x%02x\n", reg);
+
+ /* Set VGEN1 to 1.5V and enable */
+ pmic_reg_read(p, PFUZE100_VGEN1VOL, &reg);
+ reg &= ~(LDO_VOL_MASK);
+ reg |= (LDOA_1_50V | LDO_EN);
+ pmic_reg_write(p, PFUZE100_VGEN1VOL, reg);
+
+ /* Set SWBST to 5.0V and enable */
+ pmic_reg_read(p, PFUZE100_SWBSTCON1, &reg);
+ reg &= ~(SWBST_MODE_MASK | SWBST_VOL_MASK);
+ reg |= (SWBST_5_00V | SWBST_MODE_AUTO);
+ pmic_reg_write(p, PFUZE100_SWBSTCON1, reg);
+ }
+ }
+
+ /* configure LTC3676 PMIC */
+ else {
+ power_ltc3676_init(I2C_PMIC);
+ p = pmic_get("LTC3676_PMIC");
+ if (p && !pmic_probe(p)) {
+ puts("PMIC: LTC3676\n");
+ /* set board-specific scalar to 1225mV for IMX6Q@1GHz */
+ if (is_cpu_type(MXC_CPU_MX6Q)) {
+ /* mask PGOOD during SW1 transition */
+ reg = 0x1d | LTC3676_PGOOD_MASK;
+ pmic_reg_write(p, LTC3676_DVB1B, reg);
+ /* set SW1 (VDD_SOC) to 1259mV */
+ reg = 0x1d;
+ pmic_reg_write(p, LTC3676_DVB1A, reg);
+
+ /* mask PGOOD during SW3 transition */
+ reg = 0x1d | LTC3676_PGOOD_MASK;
+ pmic_reg_write(p, LTC3676_DVB3B, reg);
+ /*set SW3 (VDD_ARM) to 1259mV */
+ reg = 0x1d;
+ pmic_reg_write(p, LTC3676_DVB3A, reg);
+ }
+ }
+ }
+
+ return 0;
+}
+
/* setup GPIO pinmux and default configuration per baseboard */
static void setup_board_gpio(int board)
{
@@ -888,6 +1074,9 @@ int board_early_init_f(void)
setup_iomux_uart();
gpio_direction_output(GP_USB_OTG_PWR, 0); /* OTG power off */
+#if defined(CONFIG_VIDEO_IPUV3)
+ setup_display();
+#endif
return 0;
}
@@ -1076,28 +1265,6 @@ int misc_init_r(void)
setenv("serial#", str);
}
- /* configure PFUZE100 PMIC (not used on all Ventana baseboards) */
- if ((board_type == GW54xx || board_type == GW54proto) &&
- !pmic_init(I2C_PMIC)) {
- struct pmic *p = pmic_get("PFUZE100_PMIC");
- u32 reg;
- if (p && !pmic_probe(p)) {
- pmic_reg_read(p, PFUZE100_DEVICEID, &reg);
- printf("PMIC: PFUZE100 ID=0x%02x\n", reg);
-
- /* Set VGEN1 to 1.5V and enable */
- pmic_reg_read(p, PFUZE100_VGEN1VOL, &reg);
- reg &= ~(LDO_VOL_MASK);
- reg |= (LDOA_1_50V | LDO_EN);
- pmic_reg_write(p, PFUZE100_VGEN1VOL, reg);
-
- /* Set SWBST to 5.0V and enable */
- pmic_reg_read(p, PFUZE100_SWBSTCON1, &reg);
- reg &= ~(SWBST_MODE_MASK | SWBST_VOL_MASK);
- reg |= (SWBST_5_00V | SWBST_MODE_AUTO);
- pmic_reg_write(p, PFUZE100_SWBSTCON1, reg);
- }
- }
/* setup baseboard specific GPIO pinmux and config */
setup_board_gpio(board_type);
@@ -1243,7 +1410,7 @@ void ft_board_setup(void *blob, bd_t *bd)
/* board serial number */
fdt_setprop(blob, 0, "system-serial", getenv("serial#"),
- strlen(getenv("serial#") + 1));
+ strlen(getenv("serial#")) + 1);
/* board (model contains model from device-tree) */
fdt_setprop(blob, 0, "board", info->model,
diff --git a/board/gateworks/gw_ventana/ventana_eeprom.h b/board/gateworks/gw_ventana/ventana_eeprom.h
index d310bfd..434b604 100644
--- a/board/gateworks/gw_ventana/ventana_eeprom.h
+++ b/board/gateworks/gw_ventana/ventana_eeprom.h
@@ -16,16 +16,16 @@ struct ventana_board_info {
u8 mfgdate[4]; /* 0x20: MFG date (read only) */
u8 res2[7]; /* 0x24 */
/* sdram config */
- u8 sdram_size; /* 0x2B: enum (512,1024,2048) MB */
- u8 sdram_speed; /* 0x2C: enum (100,133,166,200,267,333,400) MHz */
- u8 sdram_width; /* 0x2D: enum (32,64) bit */
+ u8 sdram_size; /* 0x2B: (16 << n) MB */
+ u8 sdram_speed; /* 0x2C: (33.333 * n) MHz */
+ u8 sdram_width; /* 0x2D: (8 << n) bit */
/* cpu config */
- u8 cpu_speed; /* 0x2E: enum (800,1000,1200) MHz */
- u8 cpu_type; /* 0x2F: enum (imx6q,imx6d,imx6dl,imx6s) */
+ u8 cpu_speed; /* 0x2E: (33.333 * n) MHz */
+ u8 cpu_type; /* 0x2F: 7=imx6q, 8=imx6dl */
u8 model[16]; /* 0x30: model string */
/* FLASH config */
- u8 nand_flash_size; /* 0x40: enum (4,8,16,32,64,128) MB */
- u8 spi_flash_size; /* 0x41: enum (4,8,16,32,64,128) MB */
+ u8 nand_flash_size; /* 0x40: (8 << (n-1)) MB */
+ u8 spi_flash_size; /* 0x41: (4 << (n-1)) MB */
/* Config1: SoC Peripherals */
u8 config[8]; /* 0x42: loading options */
diff --git a/board/gumstix/pepper/Makefile b/board/gumstix/pepper/Makefile
new file mode 100644
index 0000000..ecb1d61
--- /dev/null
+++ b/board/gumstix/pepper/Makefile
@@ -0,0 +1,13 @@
+#
+# Makefile
+#
+# Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+ifdef CONFIG_SPL_BUILD
+obj-y += mux.o
+endif
+
+obj-y += board.o
diff --git a/board/gumstix/pepper/board.c b/board/gumstix/pepper/board.c
new file mode 100644
index 0000000..75aac49
--- /dev/null
+++ b/board/gumstix/pepper/board.c
@@ -0,0 +1,226 @@
+/*
+ * Board functions for Gumstix Pepper and AM335x-based boards
+ *
+ * Copyright (C) 2014, Gumstix, Incorporated - http://www.gumstix.com/
+ * Based on board/ti/am335x/board.c from Texas Instruments, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <spl.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/omap.h>
+#include <asm/arch/ddr_defs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mmc_host_def.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/mem.h>
+#include <asm/io.h>
+#include <asm/emif.h>
+#include <asm/gpio.h>
+#include <i2c.h>
+#include <miiphy.h>
+#include <cpsw.h>
+#include <power/tps65217.h>
+#include <environment.h>
+#include <watchdog.h>
+#include "board.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_SPL_BUILD
+static const struct ddr_data ddr2_data = {
+ .datardsratio0 = ((MT47H128M16RT25E_RD_DQS<<30) |
+ (MT47H128M16RT25E_RD_DQS<<20) |
+ (MT47H128M16RT25E_RD_DQS<<10) |
+ (MT47H128M16RT25E_RD_DQS<<0)),
+ .datawdsratio0 = ((MT47H128M16RT25E_WR_DQS<<30) |
+ (MT47H128M16RT25E_WR_DQS<<20) |
+ (MT47H128M16RT25E_WR_DQS<<10) |
+ (MT47H128M16RT25E_WR_DQS<<0)),
+ .datawiratio0 = ((MT47H128M16RT25E_PHY_WRLVL<<30) |
+ (MT47H128M16RT25E_PHY_WRLVL<<20) |
+ (MT47H128M16RT25E_PHY_WRLVL<<10) |
+ (MT47H128M16RT25E_PHY_WRLVL<<0)),
+ .datagiratio0 = ((MT47H128M16RT25E_PHY_GATELVL<<30) |
+ (MT47H128M16RT25E_PHY_GATELVL<<20) |
+ (MT47H128M16RT25E_PHY_GATELVL<<10) |
+ (MT47H128M16RT25E_PHY_GATELVL<<0)),
+ .datafwsratio0 = ((MT47H128M16RT25E_PHY_FIFO_WE<<30) |
+ (MT47H128M16RT25E_PHY_FIFO_WE<<20) |
+ (MT47H128M16RT25E_PHY_FIFO_WE<<10) |
+ (MT47H128M16RT25E_PHY_FIFO_WE<<0)),
+ .datawrsratio0 = ((MT47H128M16RT25E_PHY_WR_DATA<<30) |
+ (MT47H128M16RT25E_PHY_WR_DATA<<20) |
+ (MT47H128M16RT25E_PHY_WR_DATA<<10) |
+ (MT47H128M16RT25E_PHY_WR_DATA<<0)),
+};
+
+static const struct cmd_control ddr2_cmd_ctrl_data = {
+ .cmd0csratio = MT47H128M16RT25E_RATIO,
+ .cmd0iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
+
+ .cmd1csratio = MT47H128M16RT25E_RATIO,
+ .cmd1iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
+
+ .cmd2csratio = MT47H128M16RT25E_RATIO,
+ .cmd2iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
+};
+
+static const struct emif_regs ddr2_emif_reg_data = {
+ .sdram_config = MT47H128M16RT25E_EMIF_SDCFG,
+ .ref_ctrl = MT47H128M16RT25E_EMIF_SDREF,
+ .sdram_tim1 = MT47H128M16RT25E_EMIF_TIM1,
+ .sdram_tim2 = MT47H128M16RT25E_EMIF_TIM2,
+ .sdram_tim3 = MT47H128M16RT25E_EMIF_TIM3,
+ .emif_ddr_phy_ctlr_1 = MT47H128M16RT25E_EMIF_READ_LATENCY,
+};
+
+#ifdef CONFIG_SPL_OS_BOOT
+int spl_start_uboot(void)
+{
+ /* break into full u-boot on 'c' */
+ return serial_tstc() && serial_getc() == 'c';
+}
+#endif
+
+#define OSC (V_OSCK/1000000)
+const struct dpll_params dpll_ddr = {266, OSC-1, 1, -1, -1, -1, -1};
+
+const struct dpll_params *get_dpll_ddr_params(void)
+{
+ return &dpll_ddr;
+}
+
+void set_uart_mux_conf(void)
+{
+ enable_uart0_pin_mux();
+}
+
+void set_mux_conf_regs(void)
+{
+ enable_board_pin_mux();
+}
+
+const struct ctrl_ioregs ioregs = {
+ .cm0ioctl = MT47H128M16RT25E_IOCTRL_VALUE,
+ .cm1ioctl = MT47H128M16RT25E_IOCTRL_VALUE,
+ .cm2ioctl = MT47H128M16RT25E_IOCTRL_VALUE,
+ .dt0ioctl = MT47H128M16RT25E_IOCTRL_VALUE,
+ .dt1ioctl = MT47H128M16RT25E_IOCTRL_VALUE,
+};
+
+void sdram_init(void)
+{
+ config_ddr(266, &ioregs, &ddr2_data,
+ &ddr2_cmd_ctrl_data, &ddr2_emif_reg_data, 0);
+}
+#endif
+
+int board_init(void)
+{
+#if defined(CONFIG_HW_WATCHDOG)
+ hw_watchdog_init();
+#endif
+
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+ gpmc_init();
+
+ return 0;
+}
+
+#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \
+ (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
+static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
+
+static void cpsw_control(int enabled)
+{
+ /* VTP can be added here */
+
+ return;
+}
+
+static struct cpsw_slave_data cpsw_slaves[] = {
+ {
+ .slave_reg_ofs = 0x208,
+ .sliver_reg_ofs = 0xd80,
+ .phy_addr = 0,
+ .phy_if = PHY_INTERFACE_MODE_RGMII,
+ },
+};
+
+static struct cpsw_platform_data cpsw_data = {
+ .mdio_base = CPSW_MDIO_BASE,
+ .cpsw_base = CPSW_BASE,
+ .mdio_div = 0xff,
+ .channels = 8,
+ .cpdma_reg_ofs = 0x800,
+ .slaves = 1,
+ .slave_data = cpsw_slaves,
+ .ale_reg_ofs = 0xd00,
+ .ale_entries = 1024,
+ .host_port_reg_ofs = 0x108,
+ .hw_stats_reg_ofs = 0x900,
+ .bd_ram_ofs = 0x2000,
+ .mac_control = (1 << 5),
+ .control = cpsw_control,
+ .host_port_num = 0,
+ .version = CPSW_CTRL_VERSION_2,
+};
+
+int board_eth_init(bd_t *bis)
+{
+ int rv, n = 0;
+ uint8_t mac_addr[6];
+ uint32_t mac_hi, mac_lo;
+ const char *devname;
+
+ if (!eth_getenv_enetaddr("ethaddr", mac_addr)) {
+ /* try reading mac address from efuse */
+ mac_lo = readl(&cdev->macid0l);
+ mac_hi = readl(&cdev->macid0h);
+ mac_addr[0] = mac_hi & 0xFF;
+ mac_addr[1] = (mac_hi & 0xFF00) >> 8;
+ mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
+ mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
+ mac_addr[4] = mac_lo & 0xFF;
+ mac_addr[5] = (mac_lo & 0xFF00) >> 8;
+ if (is_valid_ether_addr(mac_addr))
+ eth_setenv_enetaddr("ethaddr", mac_addr);
+ }
+
+ writel((RGMII_MODE_ENABLE | RGMII_INT_DELAY), &cdev->miisel);
+
+ rv = cpsw_register(&cpsw_data);
+ if (rv < 0)
+ printf("Error %d registering CPSW switch\n", rv);
+ else
+ n += rv;
+
+ /*
+ *
+ * CPSW RGMII Internal Delay Mode is not supported in all PVT
+ * operating points. So we must set the TX clock delay feature
+ * in the KSZ9021 PHY. Since we only support a single ethernet
+ * device in U-Boot, we only do this for the current instance.
+ */
+ devname = miiphy_get_current_dev();
+ /* max rx/tx clock delay, min rx/tx control delay */
+ miiphy_write(devname, 0x0, 0x0b, 0x8104);
+ miiphy_write(devname, 0x0, 0xc, 0xa0a0);
+
+ /* min rx data delay */
+ miiphy_write(devname, 0x0, 0x0b, 0x8105);
+ miiphy_write(devname, 0x0, 0x0c, 0x0000);
+
+ /* min tx data delay */
+ miiphy_write(devname, 0x0, 0x0b, 0x8106);
+ miiphy_write(devname, 0x0, 0x0c, 0x0000);
+
+ return n;
+}
+#endif
diff --git a/board/gumstix/pepper/board.h b/board/gumstix/pepper/board.h
new file mode 100644
index 0000000..0512735
--- /dev/null
+++ b/board/gumstix/pepper/board.h
@@ -0,0 +1,19 @@
+/*
+ * Gumstix Pepper and AM335x-based boards information header
+ *
+ * Copyright (C) 2014, Gumstix, Inc. - http://www.gumstix.com/
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+/*
+ * We must be able to enable uart0, for initial output. We then have a
+ * main pinmux function that can be overridden to enable all other pinmux that
+ * is required on the board.
+ */
+void enable_uart0_pin_mux(void);
+void enable_board_pin_mux(void);
+#endif
diff --git a/board/gumstix/pepper/mux.c b/board/gumstix/pepper/mux.c
new file mode 100644
index 0000000..50b1266
--- /dev/null
+++ b/board/gumstix/pepper/mux.c
@@ -0,0 +1,78 @@
+/*
+ * Muxing for Gumstix Pepper and AM335x-based boards
+ *
+ * Copyright (C) 2014, Gumstix, Incorporated - http://www.gumstix.com/
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <common.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/mux.h>
+#include <asm/io.h>
+#include <i2c.h>
+#include "board.h"
+
+static struct module_pin_mux uart0_pin_mux[] = {
+ {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */
+ {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */
+ {-1},
+};
+
+static struct module_pin_mux mmc0_pin_mux[] = {
+ {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */
+ {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */
+ {OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT1 */
+ {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */
+ {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */
+ {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */
+ {OFFSET(spi0_cs1), (MODE(5) | RXACTIVE | PULLUP_EN)}, /* MMC0_CD */
+ {-1},
+};
+
+static struct module_pin_mux i2c0_pin_mux[] = {
+ /* I2C_DATA */
+ {OFFSET(i2c0_sda), (MODE(0) | RXACTIVE | PULLUDEN | SLEWCTRL)},
+ /* I2C_SCLK */
+ {OFFSET(i2c0_scl), (MODE(0) | RXACTIVE | PULLUDEN | SLEWCTRL)},
+ {-1},
+};
+
+static struct module_pin_mux rgmii1_pin_mux[] = {
+ {OFFSET(mii1_txen), MODE(2)}, /* RGMII1_TCTL */
+ {OFFSET(mii1_rxdv), MODE(2) | RXACTIVE}, /* RGMII1_RCTL */
+ {OFFSET(mii1_txd3), MODE(2)}, /* RGMII1_TD3 */
+ {OFFSET(mii1_txd2), MODE(2)}, /* RGMII1_TD2 */
+ {OFFSET(mii1_txd1), MODE(2)}, /* RGMII1_TD1 */
+ {OFFSET(mii1_txd0), MODE(2)}, /* RGMII1_TD0 */
+ {OFFSET(mii1_txclk), MODE(2)}, /* RGMII1_TCLK */
+ {OFFSET(mii1_rxclk), MODE(2) | RXACTIVE}, /* RGMII1_RCLK */
+ {OFFSET(mii1_rxd3), MODE(2) | RXACTIVE}, /* RGMII1_RD3 */
+ {OFFSET(mii1_rxd2), MODE(2) | RXACTIVE}, /* RGMII1_RD2 */
+ {OFFSET(mii1_rxd1), MODE(2) | RXACTIVE}, /* RGMII1_RD1 */
+ {OFFSET(mii1_rxd0), MODE(2) | RXACTIVE}, /* RGMII1_RD0 */
+ {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN},/* MDIO_DATA */
+ {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */
+ {OFFSET(rmii1_refclk), MODE(7) | RXACTIVE}, /* ETH_INT */
+ {OFFSET(mii1_col), MODE(7) | PULLUP_EN}, /* PHY_NRESET */
+ {OFFSET(xdma_event_intr1), MODE(3)},
+ {-1},
+};
+
+void enable_uart0_pin_mux(void)
+{
+ configure_module_pin_mux(uart0_pin_mux);
+}
+
+/*
+ * Do board-specific muxes.
+ */
+void enable_board_pin_mux(void)
+{
+ /* I2C0 */
+ configure_module_pin_mux(i2c0_pin_mux);
+ /* SD Card */
+ configure_module_pin_mux(mmc0_pin_mux);
+ /* Ethernet pinmux. */
+ configure_module_pin_mux(rgmii1_pin_mux);
+}
diff --git a/board/nvidia/jetson-tk1/jetson-tk1.c b/board/nvidia/jetson-tk1/jetson-tk1.c
index f97aafa..5d37718 100644
--- a/board/nvidia/jetson-tk1/jetson-tk1.c
+++ b/board/nvidia/jetson-tk1/jetson-tk1.c
@@ -6,6 +6,7 @@
*/
#include <common.h>
+#include <asm/arch/gpio.h>
#include <asm/arch/pinmux.h>
#include "pinmux-config-jetson-tk1.h"
@@ -15,6 +16,11 @@
*/
void pinmux_init(void)
{
+ pinmux_set_tristate_input_clamping();
+
+ gpio_config_table(jetson_tk1_gpio_inits,
+ ARRAY_SIZE(jetson_tk1_gpio_inits));
+
pinmux_config_pingrp_table(jetson_tk1_pingrps,
ARRAY_SIZE(jetson_tk1_pingrps));
diff --git a/board/nvidia/jetson-tk1/pinmux-config-jetson-tk1.h b/board/nvidia/jetson-tk1/pinmux-config-jetson-tk1.h
index 1adcae4..d338818 100644
--- a/board/nvidia/jetson-tk1/pinmux-config-jetson-tk1.h
+++ b/board/nvidia/jetson-tk1/pinmux-config-jetson-tk1.h
@@ -7,6 +7,98 @@
#ifndef _PINMUX_CONFIG_JETSON_TK1_H_
#define _PINMUX_CONFIG_JETSON_TK1_H_
+#define GPIO_INIT(_gpio, _init) \
+ { \
+ .gpio = GPIO_P##_gpio, \
+ .init = TEGRA_GPIO_INIT_##_init, \
+ }
+
+static const struct tegra_gpio_config jetson_tk1_gpio_inits[] = {
+ /* gpio, init_val */
+ GPIO_INIT(C7, IN),
+ GPIO_INIT(G0, OUT0),
+ GPIO_INIT(G1, OUT0),
+ GPIO_INIT(G2, IN),
+ GPIO_INIT(G3, IN),
+ GPIO_INIT(H2, OUT0),
+ GPIO_INIT(H3, OUT0),
+ GPIO_INIT(H4, IN),
+ GPIO_INIT(H5, OUT0),
+ GPIO_INIT(H6, IN),
+ GPIO_INIT(H7, OUT0),
+ GPIO_INIT(I0, OUT0),
+ GPIO_INIT(I2, OUT0),
+ GPIO_INIT(I4, OUT0),
+ GPIO_INIT(I5, IN),
+ GPIO_INIT(I6, IN),
+ GPIO_INIT(J0, IN),
+ GPIO_INIT(J2, IN),
+ GPIO_INIT(K1, OUT0),
+ GPIO_INIT(K2, IN),
+ GPIO_INIT(K3, IN),
+ GPIO_INIT(K4, OUT0),
+ GPIO_INIT(K5, OUT0),
+ GPIO_INIT(K6, OUT0),
+ GPIO_INIT(N7, IN),
+ GPIO_INIT(O0, IN),
+ GPIO_INIT(O1, IN),
+ GPIO_INIT(O2, IN),
+ GPIO_INIT(O3, IN),
+ GPIO_INIT(O4, IN),
+ GPIO_INIT(O5, IN),
+ GPIO_INIT(O6, OUT0),
+ GPIO_INIT(O7, IN),
+ GPIO_INIT(P0, OUT0),
+ GPIO_INIT(P1, OUT0),
+ GPIO_INIT(P2, OUT0),
+ GPIO_INIT(Q0, IN),
+ GPIO_INIT(Q1, IN),
+ GPIO_INIT(Q2, IN),
+ GPIO_INIT(Q5, IN),
+ GPIO_INIT(Q6, IN),
+ GPIO_INIT(Q7, IN),
+ GPIO_INIT(R0, OUT0),
+ GPIO_INIT(R1, OUT0),
+ GPIO_INIT(R2, OUT0),
+ GPIO_INIT(R4, IN),
+ GPIO_INIT(R5, OUT0),
+ GPIO_INIT(R7, IN),
+ GPIO_INIT(S0, IN),
+ GPIO_INIT(S3, OUT0),
+ GPIO_INIT(S4, OUT0),
+ GPIO_INIT(S5, IN),
+ GPIO_INIT(S6, OUT0),
+ GPIO_INIT(T0, OUT0),
+ GPIO_INIT(T1, OUT0),
+ GPIO_INIT(U0, OUT0),
+ GPIO_INIT(U1, IN),
+ GPIO_INIT(U2, IN),
+ GPIO_INIT(U3, OUT0),
+ GPIO_INIT(U4, OUT0),
+ GPIO_INIT(U5, IN),
+ GPIO_INIT(U6, IN),
+ GPIO_INIT(V0, IN),
+ GPIO_INIT(V1, IN),
+ GPIO_INIT(W2, IN),
+ GPIO_INIT(W3, IN),
+ GPIO_INIT(X1, OUT0),
+ GPIO_INIT(X3, IN),
+ GPIO_INIT(X4, OUT0),
+ GPIO_INIT(X5, IN),
+ GPIO_INIT(X6, IN),
+ GPIO_INIT(X7, OUT0),
+ GPIO_INIT(BB3, OUT0),
+ GPIO_INIT(BB5, OUT0),
+ GPIO_INIT(BB6, OUT0),
+ GPIO_INIT(BB7, OUT0),
+ GPIO_INIT(CC1, IN),
+ GPIO_INIT(CC2, IN),
+ GPIO_INIT(CC5, OUT0),
+ GPIO_INIT(EE1, OUT0),
+ GPIO_INIT(FF1, OUT0),
+ GPIO_INIT(FF2, IN),
+};
+
#define PINCFG(_pingrp, _mux, _pull, _tri, _io, _od, _rcv_sel) \
{ \
.pingrp = PMUX_PINGRP_##_pingrp, \
@@ -41,43 +133,43 @@ static const struct pmux_pingrp_config jetson_tk1_pingrps[] = {
PINCFG(UART2_RXD_PC3, IRDA, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
PINCFG(GEN1_I2C_SCL_PC4, I2C1, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT),
PINCFG(GEN1_I2C_SDA_PC5, I2C1, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT),
- PINCFG(PC7, RSVD1, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
- PINCFG(PG0, RSVD1, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
- PINCFG(PG1, RSVD1, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
- PINCFG(PG2, RSVD1, DOWN, NORMAL, INPUT, DEFAULT, DEFAULT),
- PINCFG(PG3, RSVD1, DOWN, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PC7, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PG0, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PG1, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PG2, DEFAULT, DOWN, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PG3, DEFAULT, DOWN, NORMAL, INPUT, DEFAULT, DEFAULT),
PINCFG(PG4, SPI4, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
PINCFG(PG5, SPI4, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
PINCFG(PG6, SPI4, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
PINCFG(PG7, SPI4, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
PINCFG(PH0, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
PINCFG(PH1, PWM1, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
- PINCFG(PH2, GMI, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
- PINCFG(PH3, GMI, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
- PINCFG(PH4, RSVD2, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
- PINCFG(PH5, RSVD2, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
- PINCFG(PH6, GMI, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
- PINCFG(PH7, GMI, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
- PINCFG(PI0, RSVD1, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PH2, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PH3, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PH4, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PH5, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PH6, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PH7, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PI0, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
PINCFG(PI1, RSVD1, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
- PINCFG(PI2, RSVD4, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PI2, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
PINCFG(PI3, SPI4, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
- PINCFG(PI4, GMI, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
- PINCFG(PI5, RSVD2, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
- PINCFG(PI6, RSVD1, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PI4, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PI5, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PI6, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
PINCFG(PI7, RSVD1, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
- PINCFG(PJ0, RSVD1, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
- PINCFG(PJ2, RSVD1, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PJ0, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PJ2, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
PINCFG(UART2_CTS_N_PJ5, UARTB, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
PINCFG(UART2_RTS_N_PJ6, UARTB, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
PINCFG(PJ7, UARTD, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
PINCFG(PK0, SOC, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
- PINCFG(PK1, RSVD4, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
- PINCFG(PK2, RSVD1, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
- PINCFG(PK3, GMI, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
- PINCFG(PK4, RSVD2, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
- PINCFG(SPDIF_OUT_PK5, RSVD2, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
- PINCFG(SPDIF_IN_PK6, RSVD2, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PK1, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PK2, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PK3, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PK4, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(SPDIF_OUT_PK5, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(SPDIF_IN_PK6, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
PINCFG(PK7, UARTD, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
PINCFG(DAP1_FS_PN0, I2S0, DOWN, NORMAL, INPUT, DEFAULT, DEFAULT),
PINCFG(DAP1_DIN_PN1, I2S0, DOWN, NORMAL, INPUT, DEFAULT, DEFAULT),
@@ -85,79 +177,79 @@ static const struct pmux_pingrp_config jetson_tk1_pingrps[] = {
PINCFG(DAP1_SCLK_PN3, I2S0, DOWN, NORMAL, INPUT, DEFAULT, DEFAULT),
PINCFG(USB_VBUS_EN0_PN4, USB, UP, NORMAL, INPUT, ENABLE, DEFAULT),
PINCFG(USB_VBUS_EN1_PN5, USB, UP, NORMAL, INPUT, ENABLE, DEFAULT),
- PINCFG(HDMI_INT_PN7, RSVD1, DOWN, NORMAL, INPUT, DEFAULT, NORMAL),
- PINCFG(ULPI_DATA7_PO0, ULPI, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
- PINCFG(ULPI_DATA0_PO1, ULPI, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
- PINCFG(ULPI_DATA1_PO2, ULPI, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
- PINCFG(ULPI_DATA2_PO3, ULPI, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
- PINCFG(ULPI_DATA3_PO4, ULPI, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
- PINCFG(ULPI_DATA4_PO5, ULPI, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
- PINCFG(ULPI_DATA5_PO6, ULPI, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
- PINCFG(ULPI_DATA6_PO7, ULPI, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
- PINCFG(DAP3_FS_PP0, I2S2, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
- PINCFG(DAP3_DIN_PP1, I2S2, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
- PINCFG(DAP3_DOUT_PP2, RSVD4, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(HDMI_INT_PN7, DEFAULT, DOWN, NORMAL, INPUT, DEFAULT, NORMAL),
+ PINCFG(ULPI_DATA7_PO0, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(ULPI_DATA0_PO1, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(ULPI_DATA1_PO2, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(ULPI_DATA2_PO3, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(ULPI_DATA3_PO4, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(ULPI_DATA4_PO5, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(ULPI_DATA5_PO6, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(ULPI_DATA6_PO7, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP3_FS_PP0, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP3_DIN_PP1, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP3_DOUT_PP2, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
PINCFG(DAP3_SCLK_PP3, RSVD3, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
PINCFG(DAP4_FS_PP4, I2S3, DOWN, NORMAL, INPUT, DEFAULT, DEFAULT),
PINCFG(DAP4_DIN_PP5, I2S3, DOWN, NORMAL, INPUT, DEFAULT, DEFAULT),
PINCFG(DAP4_DOUT_PP6, I2S3, DOWN, NORMAL, INPUT, DEFAULT, DEFAULT),
PINCFG(DAP4_SCLK_PP7, I2S3, DOWN, NORMAL, INPUT, DEFAULT, DEFAULT),
- PINCFG(KB_COL0_PQ0, RSVD2, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
- PINCFG(KB_COL1_PQ1, RSVD2, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
- PINCFG(KB_COL2_PQ2, RSVD2, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_COL0_PQ0, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_COL1_PQ1, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_COL2_PQ2, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
PINCFG(KB_COL3_PQ3, KBC, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
PINCFG(KB_COL4_PQ4, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
- PINCFG(KB_COL5_PQ5, RSVD2, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
- PINCFG(KB_COL6_PQ6, RSVD2, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
- PINCFG(KB_COL7_PQ7, RSVD2, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
- PINCFG(KB_ROW0_PR0, RSVD2, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
- PINCFG(KB_ROW1_PR1, RSVD2, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
- PINCFG(KB_ROW2_PR2, RSVD2, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_COL5_PQ5, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_COL6_PQ6, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_COL7_PQ7, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW0_PR0, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW1_PR1, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW2_PR2, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
PINCFG(KB_ROW3_PR3, SYS, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
- PINCFG(KB_ROW4_PR4, RSVD3, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
- PINCFG(KB_ROW5_PR5, RSVD3, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW4_PR4, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW5_PR5, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
PINCFG(KB_ROW6_PR6, DISPLAYA_ALT, DOWN, NORMAL, INPUT, DEFAULT, DEFAULT),
- PINCFG(KB_ROW7_PR7, RSVD2, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
- PINCFG(KB_ROW8_PS0, RSVD2, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW7_PR7, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW8_PS0, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
PINCFG(KB_ROW9_PS1, RSVD2, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
PINCFG(KB_ROW10_PS2, RSVD2, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
- PINCFG(KB_ROW11_PS3, RSVD2, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
- PINCFG(KB_ROW12_PS4, RSVD2, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
- PINCFG(KB_ROW13_PS5, RSVD2, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
- PINCFG(KB_ROW14_PS6, RSVD2, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW11_PS3, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW12_PS4, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW13_PS5, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW14_PS6, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
PINCFG(KB_ROW15_PS7, SOC, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
- PINCFG(KB_ROW16_PT0, RSVD2, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
- PINCFG(KB_ROW17_PT1, RSVD2, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW16_PT0, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW17_PT1, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
PINCFG(GEN2_I2C_SCL_PT5, I2C2, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT),
PINCFG(GEN2_I2C_SDA_PT6, I2C2, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT),
PINCFG(SDMMC4_CMD_PT7, SDMMC4, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
- PINCFG(PU0, RSVD4, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
- PINCFG(PU1, RSVD1, DOWN, NORMAL, INPUT, DEFAULT, DEFAULT),
- PINCFG(PU2, RSVD1, DOWN, NORMAL, INPUT, DEFAULT, DEFAULT),
- PINCFG(PU3, GMI, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
- PINCFG(PU4, GMI, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
- PINCFG(PU5, GMI, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
- PINCFG(PU6, RSVD3, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
- PINCFG(PV0, RSVD1, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
- PINCFG(PV1, RSVD1, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PU0, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PU1, DEFAULT, DOWN, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PU2, DEFAULT, DOWN, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PU3, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PU4, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PU5, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PU6, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PV0, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PV1, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
PINCFG(SDMMC3_CD_N_PV2, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
PINCFG(SDMMC1_WP_N_PV3, SDMMC1, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
PINCFG(DDC_SCL_PV4, I2C4, NORMAL, NORMAL, INPUT, DEFAULT, NORMAL),
PINCFG(DDC_SDA_PV5, I2C4, NORMAL, NORMAL, INPUT, DEFAULT, NORMAL),
- PINCFG(GPIO_W2_AUD_PW2, RSVD2, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
- PINCFG(GPIO_W3_AUD_PW3, SPI6, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(GPIO_W2_AUD_PW2, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(GPIO_W3_AUD_PW3, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
PINCFG(DAP_MCLK1_PW4, EXTPERIPH1, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
PINCFG(CLK2_OUT_PW5, EXTPERIPH2, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
PINCFG(UART3_TXD_PW6, UARTC, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
PINCFG(UART3_RXD_PW7, UARTC, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
PINCFG(DVFS_PWM_PX0, CLDVFS, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
- PINCFG(GPIO_X1_AUD_PX1, RSVD2, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(GPIO_X1_AUD_PX1, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
PINCFG(DVFS_CLK_PX2, CLDVFS, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
- PINCFG(GPIO_X3_AUD_PX3, RSVD4, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
- PINCFG(GPIO_X4_AUD_PX4, GMI, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
- PINCFG(GPIO_X5_AUD_PX5, RSVD4, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
- PINCFG(GPIO_X6_AUD_PX6, GMI, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
- PINCFG(GPIO_X7_AUD_PX7, RSVD1, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(GPIO_X3_AUD_PX3, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(GPIO_X4_AUD_PX4, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(GPIO_X5_AUD_PX5, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(GPIO_X6_AUD_PX6, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(GPIO_X7_AUD_PX7, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
PINCFG(ULPI_CLK_PY0, SPI1, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
PINCFG(ULPI_DIR_PY1, SPI1, DOWN, NORMAL, INPUT, DEFAULT, DEFAULT),
PINCFG(ULPI_NXT_PY2, SPI1, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
@@ -181,25 +273,25 @@ static const struct pmux_pingrp_config jetson_tk1_pingrps[] = {
PINCFG(PBB0, VIMCLK2_ALT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
PINCFG(CAM_I2C_SCL_PBB1, I2C3, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT),
PINCFG(CAM_I2C_SDA_PBB2, I2C3, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT),
- PINCFG(PBB3, VGP3, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PBB3, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
PINCFG(PBB4, VGP4, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
- PINCFG(PBB5, RSVD3, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
- PINCFG(PBB6, RSVD2, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
- PINCFG(PBB7, RSVD2, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PBB5, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PBB6, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PBB7, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
PINCFG(CAM_MCLK_PCC0, VI_ALT3, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
- PINCFG(PCC1, RSVD2, DOWN, NORMAL, INPUT, DEFAULT, DEFAULT),
- PINCFG(PCC2, RSVD2, DOWN, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PCC1, DEFAULT, DOWN, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PCC2, DEFAULT, DOWN, NORMAL, INPUT, DEFAULT, DEFAULT),
PINCFG(SDMMC4_CLK_PCC4, SDMMC4, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
- PINCFG(CLK2_REQ_PCC5, RSVD2, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(CLK2_REQ_PCC5, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
PINCFG(CLK3_OUT_PEE0, EXTPERIPH3, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
- PINCFG(CLK3_REQ_PEE1, RSVD2, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(CLK3_REQ_PEE1, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
PINCFG(DAP_MCLK1_REQ_PEE2, SATA, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
PINCFG(HDMI_CEC_PEE3, CEC, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT),
PINCFG(SDMMC3_CLK_LB_OUT_PEE4, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
PINCFG(SDMMC3_CLK_LB_IN_PEE5, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
PINCFG(DP_HPD_PFF0, DP, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
- PINCFG(USB_VBUS_EN2_PFF1, RSVD2, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
- PINCFG(PFF2, RSVD2, UP, NORMAL, INPUT, DISABLE, DEFAULT),
+ PINCFG(USB_VBUS_EN2_PFF1, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(PFF2, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT),
PINCFG(CORE_PWR_REQ, PWRON, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
PINCFG(CPU_PWR_REQ, RSVD2, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
PINCFG(PWR_INT_N, PMI, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
diff --git a/board/nvidia/venice2/pinmux-config-venice2.h b/board/nvidia/venice2/pinmux-config-venice2.h
index 2f79ec7..bf8e3fd 100644
--- a/board/nvidia/venice2/pinmux-config-venice2.h
+++ b/board/nvidia/venice2/pinmux-config-venice2.h
@@ -1,76 +1,286 @@
/*
- * (C) Copyright 2013
- * NVIDIA Corporation <www.nvidia.com>
+ * Copyright (c) 2014, NVIDIA CORPORATION. All rights reserved.
*
- * SPDX-License-Identifier: GPL-2.0+
+ * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _PINMUX_CONFIG_VENICE2_H_
#define _PINMUX_CONFIG_VENICE2_H_
-#define DEFAULT_PINMUX(_pingrp, _mux, _pull, _tri, _io) \
- { \
- .pingrp = PMUX_PINGRP_##_pingrp, \
- .func = PMUX_FUNC_##_mux, \
- .pull = PMUX_PULL_##_pull, \
- .tristate = PMUX_TRI_##_tri, \
- .io = PMUX_PIN_##_io, \
- .lock = PMUX_PIN_LOCK_DEFAULT, \
- .od = PMUX_PIN_OD_DEFAULT, \
- .ioreset = PMUX_PIN_IO_RESET_DEFAULT, \
+#define GPIO_INIT(_gpio, _init) \
+ { \
+ .gpio = GPIO_P##_gpio, \
+ .init = TEGRA_GPIO_INIT_##_init, \
}
-#define I2C_PINMUX(_pingrp, _mux, _pull, _tri, _io, _lock, _od) \
- { \
- .pingrp = PMUX_PINGRP_##_pingrp, \
- .func = PMUX_FUNC_##_mux, \
- .pull = PMUX_PULL_##_pull, \
- .tristate = PMUX_TRI_##_tri, \
- .io = PMUX_PIN_##_io, \
- .lock = PMUX_PIN_LOCK_##_lock, \
- .od = PMUX_PIN_OD_##_od, \
- .ioreset = PMUX_PIN_IO_RESET_DEFAULT, \
- }
+static const struct tegra_gpio_config venice2_gpio_inits[] = {
+ /* gpio, init_val */
+ GPIO_INIT(A0, IN),
+ GPIO_INIT(C7, IN),
+ GPIO_INIT(G0, IN),
+ GPIO_INIT(G1, IN),
+ GPIO_INIT(G2, IN),
+ GPIO_INIT(G3, IN),
+ GPIO_INIT(H2, IN),
+ GPIO_INIT(H4, IN),
+ GPIO_INIT(H5, OUT0),
+ GPIO_INIT(H6, IN),
+ GPIO_INIT(H7, OUT1),
+ GPIO_INIT(I0, IN),
+ GPIO_INIT(I1, IN),
+ GPIO_INIT(I2, OUT0),
+ GPIO_INIT(I4, OUT0),
+ GPIO_INIT(I5, OUT1),
+ GPIO_INIT(I6, IN),
+ GPIO_INIT(J0, IN),
+ GPIO_INIT(J7, IN),
+ GPIO_INIT(K0, IN),
+ GPIO_INIT(K1, OUT0),
+ GPIO_INIT(K2, IN),
+ GPIO_INIT(K3, IN),
+ GPIO_INIT(K4, OUT0),
+ GPIO_INIT(K6, OUT0),
+ GPIO_INIT(K7, IN),
+ GPIO_INIT(N7, IN),
+ GPIO_INIT(O2, IN),
+ GPIO_INIT(O5, IN),
+ GPIO_INIT(O6, OUT0),
+ GPIO_INIT(O7, IN),
+ GPIO_INIT(P2, OUT0),
+ GPIO_INIT(Q0, IN),
+ GPIO_INIT(Q2, IN),
+ GPIO_INIT(Q3, IN),
+ GPIO_INIT(Q6, IN),
+ GPIO_INIT(Q7, IN),
+ GPIO_INIT(R0, OUT0),
+ GPIO_INIT(R1, IN),
+ GPIO_INIT(R4, IN),
+ GPIO_INIT(S0, IN),
+ GPIO_INIT(S3, OUT0),
+ GPIO_INIT(S4, OUT0),
+ GPIO_INIT(S7, IN),
+ GPIO_INIT(T1, IN),
+ GPIO_INIT(U4, IN),
+ GPIO_INIT(U5, IN),
+ GPIO_INIT(U6, IN),
+ GPIO_INIT(V0, IN),
+ GPIO_INIT(V1, IN),
+ GPIO_INIT(W3, IN),
+ GPIO_INIT(X1, IN),
+ GPIO_INIT(X3, IN),
+ GPIO_INIT(X4, IN),
+ GPIO_INIT(X7, OUT0),
+ GPIO_INIT(CC5, OUT0),
+};
-#define DDC_PINMUX(_pingrp, _mux, _pull, _tri, _io, _lock, _rcv_sel) \
+#define PINCFG(_pingrp, _mux, _pull, _tri, _io, _od, _rcv_sel) \
{ \
.pingrp = PMUX_PINGRP_##_pingrp, \
.func = PMUX_FUNC_##_mux, \
.pull = PMUX_PULL_##_pull, \
.tristate = PMUX_TRI_##_tri, \
.io = PMUX_PIN_##_io, \
- .lock = PMUX_PIN_LOCK_##_lock, \
+ .od = PMUX_PIN_OD_##_od, \
.rcv_sel = PMUX_PIN_RCV_SEL_##_rcv_sel, \
+ .lock = PMUX_PIN_LOCK_DEFAULT, \
.ioreset = PMUX_PIN_IO_RESET_DEFAULT, \
}
-#define VI_PINMUX(_pingrp, _mux, _pull, _tri, _io, _lock, _ioreset) \
- { \
- .pingrp = PMUX_PINGRP_##_pingrp, \
- .func = PMUX_FUNC_##_mux, \
- .pull = PMUX_PULL_##_pull, \
- .tristate = PMUX_TRI_##_tri, \
- .io = PMUX_PIN_##_io, \
- .lock = PMUX_PIN_LOCK_##_lock, \
- .od = PMUX_PIN_OD_DEFAULT, \
- .ioreset = PMUX_PIN_IO_RESET_##_ioreset \
- }
-
-#define CEC_PINMUX(_pingrp, _mux, _pull, _tri, _io, _lock, _od) \
- { \
- .pingrp = PMUX_PINGRP_##_pingrp, \
- .func = PMUX_FUNC_##_mux, \
- .pull = PMUX_PULL_##_pull, \
- .tristate = PMUX_TRI_##_tri, \
- .io = PMUX_PIN_##_io, \
- .lock = PMUX_PIN_LOCK_##_lock, \
- .od = PMUX_PIN_OD_##_od, \
- .ioreset = PMUX_PIN_IO_RESET_DEFAULT, \
- }
-
-#define USB_PINMUX CEC_PINMUX
+static const struct pmux_pingrp_config venice2_pingrps[] = {
+ /* pingrp, mux, pull, tri, e_input, od, rcv_sel */
+ PINCFG(CLK_32K_OUT_PA0, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(UART3_CTS_N_PA1, UARTC, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP2_FS_PA2, I2S1, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP2_SCLK_PA3, I2S1, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP2_DIN_PA4, I2S1, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP2_DOUT_PA5, I2S1, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC3_CLK_PA6, SDMMC3, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC3_CMD_PA7, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PB0, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PB1, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC3_DAT3_PB4, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC3_DAT2_PB5, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC3_DAT1_PB6, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC3_DAT0_PB7, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(UART3_RTS_N_PC0, UARTC, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(UART2_TXD_PC2, IRDA, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(UART2_RXD_PC3, IRDA, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(GEN1_I2C_SCL_PC4, I2C1, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT),
+ PINCFG(GEN1_I2C_SDA_PC5, I2C1, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT),
+ PINCFG(PC7, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PG0, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PG1, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PG2, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PG3, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PG4, SPI4, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PG5, SPI4, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PG6, SPI4, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PG7, SPI4, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PH0, PWM0, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PH1, PWM1, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PH2, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PH3, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PH4, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PH5, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PH6, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PH7, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PI0, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PI1, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PI2, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PI3, SPI4, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PI4, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PI5, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PI6, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PI7, RSVD1, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PJ0, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PJ2, RSVD1, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(UART2_CTS_N_PJ5, UARTB, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(UART2_RTS_N_PJ6, UARTB, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PJ7, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PK0, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PK1, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PK2, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PK3, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PK4, DEFAULT, UP, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(SPDIF_OUT_PK5, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(SPDIF_IN_PK6, DEFAULT, DOWN, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PK7, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP1_FS_PN0, I2S0, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP1_DIN_PN1, I2S0, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP1_DOUT_PN2, I2S0, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP1_SCLK_PN3, I2S0, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(USB_VBUS_EN0_PN4, USB, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT),
+ PINCFG(USB_VBUS_EN1_PN5, USB, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT),
+ PINCFG(HDMI_INT_PN7, DEFAULT, DOWN, NORMAL, INPUT, DEFAULT, NORMAL),
+ PINCFG(ULPI_DATA7_PO0, ULPI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(ULPI_DATA0_PO1, ULPI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(ULPI_DATA1_PO2, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(ULPI_DATA2_PO3, ULPI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(ULPI_DATA3_PO4, ULPI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(ULPI_DATA4_PO5, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(ULPI_DATA5_PO6, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(ULPI_DATA6_PO7, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP3_FS_PP0, I2S2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP3_DIN_PP1, I2S2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP3_DOUT_PP2, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP3_SCLK_PP3, RSVD3, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP4_FS_PP4, I2S3, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP4_DIN_PP5, I2S3, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP4_DOUT_PP6, I2S3, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP4_SCLK_PP7, I2S3, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_COL0_PQ0, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_COL1_PQ1, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_COL2_PQ2, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_COL3_PQ3, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_COL4_PQ4, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_COL5_PQ5, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_COL6_PQ6, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_COL7_PQ7, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW0_PR0, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW1_PR1, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW2_PR2, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW3_PR3, KBC, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW4_PR4, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW5_PR5, RSVD3, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW6_PR6, KBC, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW7_PR7, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW8_PS0, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW9_PS1, UARTA, DOWN, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW10_PS2, UARTA, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW11_PS3, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW12_PS4, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW13_PS5, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW14_PS6, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW15_PS7, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW16_PT0, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW17_PT1, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(GEN2_I2C_SCL_PT5, I2C2, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT),
+ PINCFG(GEN2_I2C_SDA_PT6, I2C2, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT),
+ PINCFG(SDMMC4_CMD_PT7, SDMMC4, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PU0, UARTA, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PU1, UARTA, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PU2, UARTA, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PU3, UARTA, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PU4, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PU5, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PU6, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PV0, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PV1, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC3_CD_N_PV2, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC1_WP_N_PV3, SDMMC1, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(DDC_SCL_PV4, I2C4, NORMAL, NORMAL, INPUT, DEFAULT, NORMAL),
+ PINCFG(DDC_SDA_PV5, I2C4, NORMAL, NORMAL, INPUT, DEFAULT, NORMAL),
+ PINCFG(GPIO_W2_AUD_PW2, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(GPIO_W3_AUD_PW3, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP_MCLK1_PW4, EXTPERIPH1, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(CLK2_OUT_PW5, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(UART3_TXD_PW6, UARTC, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(UART3_RXD_PW7, UARTC, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(DVFS_PWM_PX0, CLDVFS, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(GPIO_X1_AUD_PX1, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(DVFS_CLK_PX2, CLDVFS, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(GPIO_X3_AUD_PX3, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(GPIO_X4_AUD_PX4, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(GPIO_X5_AUD_PX5, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(GPIO_X6_AUD_PX6, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(GPIO_X7_AUD_PX7, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(ULPI_CLK_PY0, SPI1, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(ULPI_DIR_PY1, SPI1, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(ULPI_NXT_PY2, SPI1, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(ULPI_STP_PY3, SPI1, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC1_DAT3_PY4, SDMMC1, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC1_DAT2_PY5, SDMMC1, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC1_DAT1_PY6, SDMMC1, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC1_DAT0_PY7, SDMMC1, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC1_CLK_PZ0, SDMMC1, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC1_CMD_PZ1, SDMMC1, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PWR_I2C_SCL_PZ6, I2CPWR, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT),
+ PINCFG(PWR_I2C_SDA_PZ7, I2CPWR, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT),
+ PINCFG(SDMMC4_DAT0_PAA0, SDMMC4, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC4_DAT1_PAA1, SDMMC4, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC4_DAT2_PAA2, SDMMC4, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC4_DAT3_PAA3, SDMMC4, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC4_DAT4_PAA4, SDMMC4, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC4_DAT5_PAA5, SDMMC4, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC4_DAT6_PAA6, SDMMC4, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC4_DAT7_PAA7, SDMMC4, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PBB0, VGP6, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(CAM_I2C_SCL_PBB1, I2C3, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT),
+ PINCFG(CAM_I2C_SDA_PBB2, I2C3, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT),
+ PINCFG(PBB3, VGP3, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PBB4, VGP4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PBB5, RSVD3, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PBB6, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PBB7, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(CAM_MCLK_PCC0, VI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PCC1, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PCC2, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC4_CLK_PCC4, SDMMC4, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(CLK2_REQ_PCC5, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PEX_L0_RST_N_PDD1, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PEX_L0_CLKREQ_N_PDD2, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PEX_WAKE_N_PDD3, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PEX_L1_RST_N_PDD5, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PEX_L1_CLKREQ_N_PDD6, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(CLK3_OUT_PEE0, EXTPERIPH3, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(CLK3_REQ_PEE1, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP_MCLK1_REQ_PEE2, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(HDMI_CEC_PEE3, CEC, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT),
+ PINCFG(SDMMC3_CLK_LB_OUT_PEE4, SDMMC3, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC3_CLK_LB_IN_PEE5, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(DP_HPD_PFF0, DP, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(USB_VBUS_EN2_PFF1, RSVD2, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(PFF2, RSVD2, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(CORE_PWR_REQ, PWRON, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(CPU_PWR_REQ, CPU, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PWR_INT_N, PMI, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(RESET_OUT_N, RESET_OUT_N, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(OWR, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, NORMAL),
+ PINCFG(CLK_32K_IN, CLK, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(JTAG_RTCK, RTCK, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+};
-#define DEFAULT_PADCFG(_drvgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) \
+#define DRVCFG(_drvgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) \
{ \
.drvgrp = PMUX_DRVGRP_##_drvgrp, \
.slwf = _slwf, \
@@ -82,258 +292,7 @@
.hsm = PMUX_HSM_##_hsm, \
}
-static struct pmux_pingrp_config tegra124_pinmux_common[] = {
- /* EXTPERIPH1 pinmux */
- DEFAULT_PINMUX(DAP_MCLK1_PW4, EXTPERIPH1, NORMAL, NORMAL, OUTPUT),
-
- /* I2S0 pinmux */
- DEFAULT_PINMUX(DAP1_DIN_PN1, I2S0, NORMAL, TRISTATE, INPUT),
- DEFAULT_PINMUX(DAP1_DOUT_PN2, I2S0, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(DAP1_FS_PN0, I2S0, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(DAP1_SCLK_PN3, I2S0, NORMAL, NORMAL, INPUT),
-
- /* I2S1 pinmux */
- DEFAULT_PINMUX(DAP2_DIN_PA4, I2S1, NORMAL, TRISTATE, INPUT),
- DEFAULT_PINMUX(DAP2_DOUT_PA5, I2S1, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(DAP2_FS_PA2, I2S1, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(DAP2_SCLK_PA3, I2S1, NORMAL, NORMAL, INPUT),
-
- /* I2S3 pinmux */
- DEFAULT_PINMUX(DAP4_DIN_PP5, I2S3, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(DAP4_DOUT_PP6, I2S3, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(DAP4_FS_PP4, I2S3, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(DAP4_SCLK_PP7, I2S3, NORMAL, NORMAL, INPUT),
-
- /* CLDVFS pinmux */
- DEFAULT_PINMUX(DVFS_PWM_PX0, CLDVFS, NORMAL, NORMAL, OUTPUT),
- DEFAULT_PINMUX(DVFS_CLK_PX2, CLDVFS, NORMAL, NORMAL, OUTPUT),
-
- /* ULPI pinmux */
- DEFAULT_PINMUX(ULPI_DATA0_PO1, ULPI, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(ULPI_DATA1_PO2, ULPI, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(ULPI_DATA2_PO3, ULPI, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(ULPI_DATA3_PO4, ULPI, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(ULPI_DATA4_PO5, ULPI, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(ULPI_DATA5_PO6, ULPI, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(ULPI_DATA6_PO7, ULPI, NORMAL, NORMAL, INPUT),
-
- /* EC KBC/SPI */
- DEFAULT_PINMUX(ULPI_CLK_PY0, SPI1, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(ULPI_DIR_PY1, SPI1, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(ULPI_NXT_PY2, SPI1, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(ULPI_STP_PY3, SPI1, NORMAL, NORMAL, INPUT),
-
- /* I2C3 (TPM) pinmux */
- I2C_PINMUX(CAM_I2C_SCL_PBB1, I2C3, NORMAL, NORMAL, INPUT, DEFAULT, ENABLE),
- I2C_PINMUX(CAM_I2C_SDA_PBB2, I2C3, NORMAL, NORMAL, INPUT, DEFAULT, ENABLE),
-
- /* I2C2 pinmux */
- I2C_PINMUX(GEN2_I2C_SCL_PT5, I2C2, NORMAL, NORMAL, INPUT, DEFAULT, ENABLE),
- I2C_PINMUX(GEN2_I2C_SDA_PT6, I2C2, NORMAL, NORMAL, INPUT, DEFAULT, ENABLE),
-
- /* UARTD pinmux (UART4 on Servo board, unused) */
- DEFAULT_PINMUX(PJ7, UARTD, NORMAL, NORMAL, OUTPUT),
- DEFAULT_PINMUX(PB0, UARTD, NORMAL, TRISTATE, INPUT),
- DEFAULT_PINMUX(PB1, UARTD, NORMAL, TRISTATE, INPUT),
- DEFAULT_PINMUX(PK7, UARTD, NORMAL, NORMAL, OUTPUT),
-
- /* SPI4 (Winbond 'boot ROM') */
- DEFAULT_PINMUX(PG5, SPI4, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(PG6, SPI4, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(PG7, SPI4, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(PI3, SPI4, NORMAL, NORMAL, INPUT),
-
- /* Touch IRQ */
- DEFAULT_PINMUX(GPIO_W3_AUD_PW3, RSVD1, NORMAL, NORMAL, INPUT),
-
- /* PWM1 pinmux */
- DEFAULT_PINMUX(PH1, PWM1, NORMAL, NORMAL, OUTPUT),
-
- /* SDMMC1 pinmux */
- DEFAULT_PINMUX(SDMMC1_CLK_PZ0, SDMMC1, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(SDMMC1_CMD_PZ1, SDMMC1, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(SDMMC1_DAT0_PY7, SDMMC1, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(SDMMC1_DAT1_PY6, SDMMC1, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(SDMMC1_DAT2_PY5, SDMMC1, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(SDMMC1_DAT3_PY4, SDMMC1, UP, NORMAL, INPUT),
-
- /* SDMMC3 pinmux */
- DEFAULT_PINMUX(SDMMC3_CLK_PA6, SDMMC3, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(SDMMC3_CMD_PA7, SDMMC3, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(SDMMC3_DAT0_PB7, SDMMC3, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(SDMMC3_DAT1_PB6, SDMMC3, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(SDMMC3_DAT2_PB5, SDMMC3, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(SDMMC3_DAT3_PB4, SDMMC3, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(SDMMC3_CLK_LB_IN_PEE5, SDMMC3, UP, TRISTATE, INPUT),
- DEFAULT_PINMUX(SDMMC3_CLK_LB_OUT_PEE4, SDMMC3, DOWN, NORMAL, INPUT),
-
- /* SDMMC4 pinmux */
- DEFAULT_PINMUX(SDMMC4_CLK_PCC4, SDMMC4, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(SDMMC4_CMD_PT7, SDMMC4, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(SDMMC4_DAT0_PAA0, SDMMC4, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(SDMMC4_DAT1_PAA1, SDMMC4, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(SDMMC4_DAT2_PAA2, SDMMC4, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(SDMMC4_DAT3_PAA3, SDMMC4, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(SDMMC4_DAT4_PAA4, SDMMC4, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(SDMMC4_DAT5_PAA5, SDMMC4, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(SDMMC4_DAT6_PAA6, SDMMC4, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(SDMMC4_DAT7_PAA7, SDMMC4, UP, NORMAL, INPUT),
-
- /* BLINK pinmux */
- DEFAULT_PINMUX(CLK_32K_OUT_PA0, BLINK, NORMAL, NORMAL, OUTPUT),
-
- /* KBC pinmux */
- DEFAULT_PINMUX(KB_COL0_PQ0, KBC, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(KB_COL1_PQ1, KBC, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(KB_COL2_PQ2, KBC, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(KB_ROW0_PR0, KBC, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(KB_ROW1_PR1, KBC, UP, NORMAL, INPUT),
-
- /* Misc */
- DEFAULT_PINMUX(PV0, RSVD1, NORMAL, TRISTATE, OUTPUT),
- DEFAULT_PINMUX(KB_ROW7_PR7, RSVD1, UP, NORMAL, INPUT),
-
- /* UARTA pinmux (BR_UART_TXD/RXD on Servo board) */
- DEFAULT_PINMUX(KB_ROW9_PS1, UARTA, UP, NORMAL, OUTPUT),
- DEFAULT_PINMUX(KB_ROW10_PS2, UARTA, UP, TRISTATE, INPUT),
-
- /* I2CPWR pinmux (I2C5) */
- I2C_PINMUX(PWR_I2C_SCL_PZ6, I2CPWR, NORMAL, NORMAL, INPUT, DEFAULT, ENABLE),
- I2C_PINMUX(PWR_I2C_SDA_PZ7, I2CPWR, NORMAL, NORMAL, INPUT, DEFAULT, ENABLE),
-
- /* RTCK pinmux */
- DEFAULT_PINMUX(JTAG_RTCK, RTCK, NORMAL, NORMAL, INPUT),
-
- /* CLK pinmux */
- DEFAULT_PINMUX(CLK_32K_IN, CLK, NORMAL, TRISTATE, INPUT),
-
- /* PWRON pinmux */
- DEFAULT_PINMUX(CORE_PWR_REQ, PWRON, NORMAL, NORMAL, OUTPUT),
-
- /* CPU pinmux */
- DEFAULT_PINMUX(CPU_PWR_REQ, CPU, NORMAL, NORMAL, OUTPUT),
-
- /* PMI pinmux */
- DEFAULT_PINMUX(PWR_INT_N, PMI, NORMAL, TRISTATE, INPUT),
-
- /* RESET_OUT_N pinmux */
- DEFAULT_PINMUX(RESET_OUT_N, RESET_OUT_N, NORMAL, NORMAL, OUTPUT),
-
- /* EXTPERIPH3 pinmux */
- DEFAULT_PINMUX(CLK3_OUT_PEE0, EXTPERIPH3, NORMAL, NORMAL, OUTPUT),
-
- /* I2C1 pinmux */
- I2C_PINMUX(GEN1_I2C_SCL_PC4, I2C1, NORMAL, NORMAL, INPUT, DEFAULT, ENABLE),
- I2C_PINMUX(GEN1_I2C_SDA_PC5, I2C1, NORMAL, NORMAL, INPUT, DEFAULT, ENABLE),
-
- /* UARTB, GPS */
- DEFAULT_PINMUX(UART2_CTS_N_PJ5, UARTB, NORMAL, TRISTATE, INPUT),
- DEFAULT_PINMUX(UART2_RTS_N_PJ6, UARTB, NORMAL, NORMAL, OUTPUT),
- DEFAULT_PINMUX(UART2_RXD_PC3, IRDA, NORMAL, TRISTATE, INPUT),
- DEFAULT_PINMUX(UART2_TXD_PC2, IRDA, NORMAL, NORMAL, OUTPUT),
-
- /* UARTC (WIFI/BT) */
- DEFAULT_PINMUX(UART3_CTS_N_PA1, UARTC, NORMAL, TRISTATE, INPUT),
- DEFAULT_PINMUX(UART3_RTS_N_PC0, UARTC, NORMAL, NORMAL, OUTPUT),
- DEFAULT_PINMUX(UART3_RXD_PW7, UARTC, NORMAL, TRISTATE, INPUT),
- DEFAULT_PINMUX(UART3_TXD_PW6, UARTC, NORMAL, NORMAL, OUTPUT),
-
- /* CEC pinmux */
- CEC_PINMUX(HDMI_CEC_PEE3, CEC, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE),
-
- /* I2C4 (HDMI_DDC) pinmux */
- DDC_PINMUX(DDC_SCL_PV4, I2C4, NORMAL, NORMAL, INPUT, DEFAULT, HIGH),
- DDC_PINMUX(DDC_SDA_PV5, I2C4, NORMAL, NORMAL, INPUT, DEFAULT, HIGH),
-
- /* USB pinmux */
- USB_PINMUX(USB_VBUS_EN0_PN4, USB, NORMAL, NORMAL, INPUT, DEFAULT, ENABLE),
- USB_PINMUX(USB_VBUS_EN1_PN5, USB, NORMAL, NORMAL, INPUT, DEFAULT, ENABLE),
-
- /* Unused, marked SNN_ on schematic, TRISTATE 'em */
- DEFAULT_PINMUX(PBB0, RSVD3, NORMAL, TRISTATE, INPUT),
- DEFAULT_PINMUX(PBB3, RSVD3, NORMAL, TRISTATE, INPUT),
- DEFAULT_PINMUX(PBB4, RSVD3, NORMAL, TRISTATE, INPUT),
- DEFAULT_PINMUX(PBB5, RSVD2, NORMAL, TRISTATE, INPUT),
- DEFAULT_PINMUX(PBB6, RSVD1, NORMAL, TRISTATE, INPUT),
- DEFAULT_PINMUX(PBB7, RSVD1, NORMAL, TRISTATE, INPUT),
- DEFAULT_PINMUX(PCC1, RSVD1, NORMAL, TRISTATE, INPUT),
- DEFAULT_PINMUX(PCC2, RSVD1, NORMAL, TRISTATE, INPUT),
- DEFAULT_PINMUX(PH3, GMI, NORMAL, TRISTATE, INPUT),
- DEFAULT_PINMUX(PI7, GMI, NORMAL, TRISTATE, INPUT),
- DEFAULT_PINMUX(PJ2, RSVD1, NORMAL, TRISTATE, INPUT),
- DEFAULT_PINMUX(GPIO_X5_AUD_PX5, RSVD3, NORMAL, TRISTATE, INPUT),
- DEFAULT_PINMUX(GPIO_X6_AUD_PX6, GMI, NORMAL, TRISTATE, INPUT),
- DEFAULT_PINMUX(GPIO_W2_AUD_PW2, RSVD1, NORMAL, TRISTATE, INPUT),
- DEFAULT_PINMUX(PFF2, RSVD1, NORMAL, TRISTATE, INPUT),
- DEFAULT_PINMUX(USB_VBUS_EN2_PFF1, RSVD1, NORMAL, TRISTATE, INPUT),
- DEFAULT_PINMUX(KB_COL5_PQ5, RSVD1, NORMAL, TRISTATE, INPUT),
- DEFAULT_PINMUX(KB_ROW2_PR2, RSVD1, NORMAL, TRISTATE, INPUT),
- DEFAULT_PINMUX(KB_ROW3_PR3, KBC, NORMAL, TRISTATE, INPUT),
- DEFAULT_PINMUX(KB_ROW5_PR5, RSVD2, NORMAL, TRISTATE, INPUT),
- DEFAULT_PINMUX(KB_ROW6_PR6, KBC, NORMAL, TRISTATE, INPUT),
- DEFAULT_PINMUX(KB_ROW13_PS5, RSVD1, NORMAL, TRISTATE, INPUT),
- DEFAULT_PINMUX(KB_ROW14_PS6, RSVD1, NORMAL, TRISTATE, INPUT),
- DEFAULT_PINMUX(KB_ROW16_PT0, RSVD1, NORMAL, TRISTATE, INPUT),
- DEFAULT_PINMUX(OWR, RSVD1, NORMAL, TRISTATE, INPUT),
- DEFAULT_PINMUX(ULPI_DATA7_PO0, ULPI, NORMAL, TRISTATE, INPUT),
- DEFAULT_PINMUX(DAP3_DIN_PP1, RSVD1, NORMAL, TRISTATE, INPUT),
- DEFAULT_PINMUX(DAP3_FS_PP0, RSVD1, NORMAL, TRISTATE, INPUT),
- DEFAULT_PINMUX(DAP3_SCLK_PP3, RSVD2, NORMAL, TRISTATE, INPUT),
- DEFAULT_PINMUX(CLK2_OUT_PW5, RSVD1, NORMAL, TRISTATE, INPUT),
- DEFAULT_PINMUX(SDMMC1_WP_N_PV3, RSVD1, NORMAL, TRISTATE, INPUT),
- DEFAULT_PINMUX(CAM_MCLK_PCC0, RSVD1, NORMAL, TRISTATE, INPUT),
- DEFAULT_PINMUX(CLK3_REQ_PEE1, RSVD1, NORMAL, TRISTATE, INPUT),
- DEFAULT_PINMUX(SPDIF_OUT_PK5, RSVD1, NORMAL, TRISTATE, INPUT),
-};
-
-static struct pmux_pingrp_config unused_pins_lowpower[] = {
- DEFAULT_PINMUX(DAP_MCLK1_REQ_PEE2, RSVD3, DOWN, TRISTATE, OUTPUT),
-};
-
-/* Initially setting all used GPIO's to non-TRISTATE */
-static struct pmux_pingrp_config tegra124_pinmux_set_nontristate[] = {
- DEFAULT_PINMUX(GPIO_X4_AUD_PX4, RSVD1, DOWN, NORMAL, OUTPUT),
- DEFAULT_PINMUX(GPIO_X7_AUD_PX7, RSVD1, DOWN, NORMAL, OUTPUT),
- DEFAULT_PINMUX(GPIO_W2_AUD_PW2, RSVD1, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(GPIO_X3_AUD_PX3, RSVD3, UP, NORMAL, INPUT),
-
- /* EN_VDD_BL */
- DEFAULT_PINMUX(DAP3_DOUT_PP2, I2S2, DOWN, NORMAL, OUTPUT),
-
- /* MODEM */
- DEFAULT_PINMUX(PV0, RSVD3, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(PV1, RSVD1, NORMAL, NORMAL, INPUT),
-
- /* BOOT_SEL0-3 */
- DEFAULT_PINMUX(PG0, GMI, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(PG1, GMI, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(PG2, GMI, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(PG3, GMI, NORMAL, NORMAL, INPUT),
-
- DEFAULT_PINMUX(CLK2_REQ_PCC5, RSVD3, NORMAL, NORMAL, OUTPUT),
-
- DEFAULT_PINMUX(KB_COL3_PQ3, KBC, UP, NORMAL, OUTPUT),
- DEFAULT_PINMUX(KB_COL4_PQ4, SDMMC3, UP, NORMAL, INPUT),
- DEFAULT_PINMUX(KB_COL6_PQ6, KBC, UP, NORMAL, OUTPUT),
- DEFAULT_PINMUX(KB_COL7_PQ7, KBC, UP, NORMAL, OUTPUT),
- DEFAULT_PINMUX(KB_ROW4_PR4, KBC, DOWN, NORMAL, INPUT),
- DEFAULT_PINMUX(KB_ROW8_PS0, KBC, UP, NORMAL, INPUT),
-
- DEFAULT_PINMUX(PU4, RSVD3, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(PU5, RSVD3, NORMAL, NORMAL, OUTPUT),
- DEFAULT_PINMUX(PU6, RSVD3, NORMAL, NORMAL, INPUT),
-
- DEFAULT_PINMUX(HDMI_INT_PN7, RSVD1, DOWN, NORMAL, INPUT),
- DEFAULT_PINMUX(SPDIF_IN_PK6, RSVD2, NORMAL, NORMAL, INPUT),
- DEFAULT_PINMUX(SDMMC3_CD_N_PV2, SDMMC3, UP, NORMAL, INPUT),
-
- /* TS_SHDN_L */
- DEFAULT_PINMUX(PK1, GMI, NORMAL, NORMAL, OUTPUT),
+static const struct pmux_drvgrp_config venice2_drvgrps[] = {
};
-static struct pmux_drvgrp_config venice2_padctrl[] = {
- /* (_drvgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) */
- DEFAULT_PADCFG(SDIO3, SDIOCFG_DRVUP_SLWF, SDIOCFG_DRVDN_SLWR,
- SDIOCFG_DRVUP, SDIOCFG_DRVDN, NONE, NONE, NONE),
-};
#endif /* PINMUX_CONFIG_VENICE2_H */
diff --git a/board/nvidia/venice2/venice2.c b/board/nvidia/venice2/venice2.c
index 15082c4..c56ef12 100644
--- a/board/nvidia/venice2/venice2.c
+++ b/board/nvidia/venice2/venice2.c
@@ -6,12 +6,9 @@
*/
#include <common.h>
-#include <asm-generic/gpio.h>
#include <asm/arch/gpio.h>
-#include <asm/arch/gp_padctrl.h>
#include <asm/arch/pinmux.h>
#include "pinmux-config-venice2.h"
-#include <i2c.h>
/*
* Routine: pinmux_init
@@ -19,16 +16,14 @@
*/
void pinmux_init(void)
{
- pinmux_config_pingrp_table(tegra124_pinmux_set_nontristate,
- ARRAY_SIZE(tegra124_pinmux_set_nontristate));
+ pinmux_set_tristate_input_clamping();
- pinmux_config_pingrp_table(tegra124_pinmux_common,
- ARRAY_SIZE(tegra124_pinmux_common));
+ gpio_config_table(venice2_gpio_inits,
+ ARRAY_SIZE(venice2_gpio_inits));
- pinmux_config_pingrp_table(unused_pins_lowpower,
- ARRAY_SIZE(unused_pins_lowpower));
+ pinmux_config_pingrp_table(venice2_pingrps,
+ ARRAY_SIZE(venice2_pingrps));
- /* Initialize any non-default pad configs (APB_MISC_GP regs) */
- pinmux_config_drvgrp_table(venice2_padctrl,
- ARRAY_SIZE(venice2_padctrl));
+ pinmux_config_drvgrp_table(venice2_drvgrps,
+ ARRAY_SIZE(venice2_drvgrps));
}
diff --git a/board/renesas/koelsch/koelsch.c b/board/renesas/koelsch/koelsch.c
index 32d3b58..bfd0cc6 100644
--- a/board/renesas/koelsch/koelsch.c
+++ b/board/renesas/koelsch/koelsch.c
@@ -19,186 +19,28 @@
#include <netdev.h>
#include <miiphy.h>
#include <i2c.h>
+#include <div64.h>
#include "qos.h"
DECLARE_GLOBAL_DATA_PTR;
-#define s_init_wait(cnt) \
- ({ \
- u32 i = 0x10000 * cnt; \
- while (i > 0) \
- i--; \
- })
-
-
-#define dbpdrgd_check(bsc) \
- ({ \
- while ((readl(&bsc->dbpdrgd) & 0x1) != 0x1) \
- ; \
- })
-
-#if defined(CONFIG_NORFLASH)
-static void bsc_init(void)
-{
- struct r8a7791_lbsc *lbsc = (struct r8a7791_lbsc *)LBSC_BASE;
- struct r8a7791_dbsc3 *dbsc3_0 = (struct r8a7791_dbsc3 *)DBSC3_0_BASE;
-
- /* LBSC */
- writel(0x00000020, &lbsc->cs0ctrl);
- writel(0x00000020, &lbsc->cs1ctrl);
- writel(0x00002020, &lbsc->ecs0ctrl);
- writel(0x00002020, &lbsc->ecs1ctrl);
-
- writel(0x077F077F, &lbsc->cswcr0);
- writel(0x077F077F, &lbsc->cswcr1);
- writel(0x077F077F, &lbsc->ecswcr0);
- writel(0x077F077F, &lbsc->ecswcr1);
-
- /* DBSC3 */
- s_init_wait(10);
-
- writel(0x0000A55A, &dbsc3_0->dbpdlck);
- writel(0x00000001, &dbsc3_0->dbpdrga);
- writel(0x80000000, &dbsc3_0->dbpdrgd);
- writel(0x00000004, &dbsc3_0->dbpdrga);
- dbpdrgd_check(dbsc3_0);
-
- writel(0x00000006, &dbsc3_0->dbpdrga);
- writel(0x0001C000, &dbsc3_0->dbpdrgd);
-
- writel(0x00000023, &dbsc3_0->dbpdrga);
- writel(0x00FD2480, &dbsc3_0->dbpdrgd);
-
- writel(0x00000010, &dbsc3_0->dbpdrga);
- writel(0xF004649B, &dbsc3_0->dbpdrgd);
-
- writel(0x0000000F, &dbsc3_0->dbpdrga);
- writel(0x00181EE4, &dbsc3_0->dbpdrgd);
-
- writel(0x0000000E, &dbsc3_0->dbpdrga);
- writel(0x33C03812, &dbsc3_0->dbpdrgd);
-
- writel(0x00000003, &dbsc3_0->dbpdrga);
- writel(0x0300C481, &dbsc3_0->dbpdrgd);
-
- writel(0x00000007, &dbsc3_0->dbkind);
- writel(0x10030A02, &dbsc3_0->dbconf0);
- writel(0x00000001, &dbsc3_0->dbphytype);
- writel(0x00000000, &dbsc3_0->dbbl);
- writel(0x0000000B, &dbsc3_0->dbtr0);
- writel(0x00000008, &dbsc3_0->dbtr1);
- writel(0x00000000, &dbsc3_0->dbtr2);
- writel(0x0000000B, &dbsc3_0->dbtr3);
- writel(0x000C000B, &dbsc3_0->dbtr4);
- writel(0x00000027, &dbsc3_0->dbtr5);
- writel(0x0000001C, &dbsc3_0->dbtr6);
- writel(0x00000005, &dbsc3_0->dbtr7);
- writel(0x00000018, &dbsc3_0->dbtr8);
- writel(0x00000008, &dbsc3_0->dbtr9);
- writel(0x0000000C, &dbsc3_0->dbtr10);
- writel(0x00000009, &dbsc3_0->dbtr11);
- writel(0x00000012, &dbsc3_0->dbtr12);
- writel(0x000000D0, &dbsc3_0->dbtr13);
- writel(0x00140005, &dbsc3_0->dbtr14);
- writel(0x00050004, &dbsc3_0->dbtr15);
- writel(0x70233005, &dbsc3_0->dbtr16);
- writel(0x000C0000, &dbsc3_0->dbtr17);
- writel(0x00000300, &dbsc3_0->dbtr18);
- writel(0x00000040, &dbsc3_0->dbtr19);
- writel(0x00000001, &dbsc3_0->dbrnk0);
- writel(0x00020001, &dbsc3_0->dbadj0);
- writel(0x20082008, &dbsc3_0->dbadj2);
- writel(0x00020002, &dbsc3_0->dbwt0cnf0);
- writel(0x0000000F, &dbsc3_0->dbwt0cnf4);
-
- writel(0x00000015, &dbsc3_0->dbpdrga);
- writel(0x00000D70, &dbsc3_0->dbpdrgd);
-
- writel(0x00000016, &dbsc3_0->dbpdrga);
- writel(0x00000006, &dbsc3_0->dbpdrgd);
-
- writel(0x00000017, &dbsc3_0->dbpdrga);
- writel(0x00000018, &dbsc3_0->dbpdrgd);
-
- writel(0x00000012, &dbsc3_0->dbpdrga);
- writel(0x9D5CBB66, &dbsc3_0->dbpdrgd);
-
- writel(0x00000013, &dbsc3_0->dbpdrga);
- writel(0x1A868300, &dbsc3_0->dbpdrgd);
-
- writel(0x00000023, &dbsc3_0->dbpdrga);
- writel(0x00FDB6C0, &dbsc3_0->dbpdrgd);
-
- writel(0x00000014, &dbsc3_0->dbpdrga);
- writel(0x300214D8, &dbsc3_0->dbpdrgd);
-
- writel(0x0000001A, &dbsc3_0->dbpdrga);
- writel(0x930035C7, &dbsc3_0->dbpdrgd);
-
- writel(0x00000060, &dbsc3_0->dbpdrga);
- writel(0x330657B2, &dbsc3_0->dbpdrgd);
-
- writel(0x00000011, &dbsc3_0->dbpdrga);
- writel(0x1000040B, &dbsc3_0->dbpdrgd);
-
- writel(0x0000FA00, &dbsc3_0->dbcmd);
- writel(0x00000001, &dbsc3_0->dbpdrga);
- writel(0x00000071, &dbsc3_0->dbpdrgd);
-
- writel(0x00000004, &dbsc3_0->dbpdrga);
- dbpdrgd_check(dbsc3_0);
-
- writel(0x0000FA00, &dbsc3_0->dbcmd);
- writel(0x2100FA00, &dbsc3_0->dbcmd);
- writel(0x0000FA00, &dbsc3_0->dbcmd);
- writel(0x0000FA00, &dbsc3_0->dbcmd);
- writel(0x0000FA00, &dbsc3_0->dbcmd);
- writel(0x0000FA00, &dbsc3_0->dbcmd);
- writel(0x0000FA00, &dbsc3_0->dbcmd);
- writel(0x0000FA00, &dbsc3_0->dbcmd);
- writel(0x0000FA00, &dbsc3_0->dbcmd);
-
- writel(0x110000DB, &dbsc3_0->dbcmd);
-
- writel(0x00000001, &dbsc3_0->dbpdrga);
- writel(0x00000181, &dbsc3_0->dbpdrgd);
-
- writel(0x00000004, &dbsc3_0->dbpdrga);
- dbpdrgd_check(dbsc3_0);
-
- writel(0x00000001, &dbsc3_0->dbpdrga);
- writel(0x0000FE01, &dbsc3_0->dbpdrgd);
-
- writel(0x00000004, &dbsc3_0->dbpdrga);
- dbpdrgd_check(dbsc3_0);
-
- writel(0x00000000, &dbsc3_0->dbbs0cnt1);
- writel(0x01004C20, &dbsc3_0->dbcalcnf);
- writel(0x014000AA, &dbsc3_0->dbcaltr);
- writel(0x00000140, &dbsc3_0->dbrfcnf0);
- writel(0x00081860, &dbsc3_0->dbrfcnf1);
- writel(0x00010000, &dbsc3_0->dbrfcnf2);
- writel(0x00000001, &dbsc3_0->dbrfen);
- writel(0x00000001, &dbsc3_0->dbacen);
-}
-#else
-#define bsc_init() do {} while (0)
-#endif /* CONFIG_NORFLASH */
-
+#define CLK2MHZ(clk) (clk / 1000 / 1000)
void s_init(void)
{
- struct r8a7791_rwdt *rwdt = (struct r8a7791_rwdt *)RWDT_BASE;
- struct r8a7791_swdt *swdt = (struct r8a7791_swdt *)SWDT_BASE;
+ struct rcar_rwdt *rwdt = (struct rcar_rwdt *)RWDT_BASE;
+ struct rcar_swdt *swdt = (struct rcar_swdt *)SWDT_BASE;
+ u32 stc;
/* Watchdog init */
writel(0xA5A5A500, &rwdt->rwtcsra);
writel(0xA5A5A500, &swdt->swtcsra);
+ /* CPU frequency setting. Set to 1.5GHz */
+ stc = ((1500 / CLK2MHZ(CONFIG_SYS_CLK_FREQ)) - 1) << PLL0_STC_BIT;
+ clrsetbits_le32(PLL0CR, PLL0_STC_MASK, stc);
+
/* QoS */
qos_init();
-
- /* BSC */
- bsc_init();
}
#define MSTPSR1 0xE6150038
@@ -213,18 +55,6 @@ void s_init(void)
#define SMSTPCR8 0xE6150990
#define ETHER_MSTP813 (1 << 13)
-#define PMMR 0xE6060000
-#define GPSR4 0xE6060014
-#define IPSR14 0xE6060058
-
-#define set_guard_reg(addr, mask, value) \
-{ \
- u32 val; \
- val = (readl(addr) & ~(mask)) | (value); \
- writel(~val, PMMR); \
- writel(val, addr); \
-}
-
#define mstp_setbits(type, addr, saddr, set) \
out_##type((saddr), in_##type(addr) | (set))
#define mstp_clrbits(type, addr, saddr, clear) \
@@ -238,13 +68,7 @@ int board_early_init_f(void)
{
mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125);
-#if defined(CONFIG_NORFLASH)
/* SCIF0 */
- set_guard_reg(GPSR4, 0x34000000, 0x00000000);
- set_guard_reg(IPSR14, 0x00000FC7, 0x00000481);
- set_guard_reg(GPSR4, 0x00000000, 0x34000000);
-#endif
-
mstp_clrbits_le32(MSTPSR7, SMSTPCR7, SCIF0_MSTP721);
/* ETHER */
diff --git a/board/renesas/koelsch/qos.c b/board/renesas/koelsch/qos.c
index 7f88f7d..e6c5e48 100644
--- a/board/renesas/koelsch/qos.c
+++ b/board/renesas/koelsch/qos.c
@@ -1,7 +1,7 @@
/*
* board/renesas/koelsch/qos.c
*
- * Copyright (C) 2013 Renesas Electronics Corporation
+ * Copyright (C) 2013,2014 Renesas Electronics Corporation
*
* SPDX-License-Identifier: GPL-2.0
*
@@ -13,7 +13,7 @@
#include <asm/io.h>
#include <asm/arch/rmobile.h>
-/* QoS version 0.23 */
+/* QoS version 0.240 for ES1 and version 0.310 for ES2 */
enum {
DBSC3_00, DBSC3_01, DBSC3_02, DBSC3_03, DBSC3_04,
@@ -102,24 +102,30 @@ static u32 dbsc3_1_w_qos_addr[DBSC3_NR] = {
void qos_init(void)
{
int i;
- struct r8a7791_s3c *s3c;
- struct r8a7791_s3c_qos *s3c_qos;
- struct r8a7791_dbsc3_qos *qos_addr;
- struct r8a7791_mxi *mxi;
- struct r8a7791_mxi_qos *mxi_qos;
- struct r8a7791_axi_qos *axi_qos;
+ struct rcar_s3c *s3c;
+ struct rcar_s3c_qos *s3c_qos;
+ struct rcar_dbsc3_qos *qos_addr;
+ struct rcar_mxi *mxi;
+ struct rcar_mxi_qos *mxi_qos;
+ struct rcar_axi_qos *axi_qos;
/* DBSC DBADJ2 */
writel(0x20042004, DBSC3_0_DBADJ2);
/* S3C -QoS */
- s3c = (struct r8a7791_s3c *)S3C_BASE;
- writel(0x00FF1B1D, &s3c->s3cadsplcr);
- writel(0x1F0D0C0C, &s3c->s3crorr);
- writel(0x1F0D0C0A, &s3c->s3cworr);
-
+ s3c = (struct rcar_s3c *)S3C_BASE;
+ if (IS_R8A7791_ES2()) {
+ writel(0x00FF1B0D, &s3c->s3cadsplcr);
+ writel(0x1F0D0B0A, &s3c->s3crorr);
+ writel(0x1F0D0B09, &s3c->s3cworr);
+ writel(0x00200808, &s3c->s3carcr11);
+ } else {
+ writel(0x00FF1B1D, &s3c->s3cadsplcr);
+ writel(0x1F0D0C0C, &s3c->s3crorr);
+ writel(0x1F0D0C0A, &s3c->s3cworr);
+ }
/* QoS Control Registers */
- s3c_qos = (struct r8a7791_s3c_qos *)S3C_QOS_CCI0_BASE;
+ s3c_qos = (struct rcar_s3c_qos *)S3C_QOS_CCI0_BASE;
writel(0x00890089, &s3c_qos->s3cqos0);
writel(0x20960010, &s3c_qos->s3cqos1);
writel(0x20302030, &s3c_qos->s3cqos2);
@@ -130,7 +136,7 @@ void qos_init(void)
writel(0x20AA2200, &s3c_qos->s3cqos7);
writel(0x00002032, &s3c_qos->s3cqos8);
- s3c_qos = (struct r8a7791_s3c_qos *)S3C_QOS_CCI1_BASE;
+ s3c_qos = (struct rcar_s3c_qos *)S3C_QOS_CCI1_BASE;
writel(0x00890089, &s3c_qos->s3cqos0);
writel(0x20960010, &s3c_qos->s3cqos1);
writel(0x20302030, &s3c_qos->s3cqos2);
@@ -141,8 +147,11 @@ void qos_init(void)
writel(0x20AA2200, &s3c_qos->s3cqos7);
writel(0x00002032, &s3c_qos->s3cqos8);
- s3c_qos = (struct r8a7791_s3c_qos *)S3C_QOS_MXI_BASE;
- writel(0x00820082, &s3c_qos->s3cqos0);
+ s3c_qos = (struct rcar_s3c_qos *)S3C_QOS_MXI_BASE;
+ if (IS_R8A7791_ES2())
+ writel(0x80928092, &s3c_qos->s3cqos0);
+ else
+ writel(0x00820082, &s3c_qos->s3cqos0);
writel(0x20960020, &s3c_qos->s3cqos1);
writel(0x20302030, &s3c_qos->s3cqos2);
writel(0x20AA20DC, &s3c_qos->s3cqos3);
@@ -152,7 +161,7 @@ void qos_init(void)
writel(0x20AA20DC, &s3c_qos->s3cqos7);
writel(0x00002032, &s3c_qos->s3cqos8);
- s3c_qos = (struct r8a7791_s3c_qos *)S3C_QOS_AXI_BASE;
+ s3c_qos = (struct rcar_s3c_qos *)S3C_QOS_AXI_BASE;
writel(0x00820082, &s3c_qos->s3cqos0);
writel(0x20960020, &s3c_qos->s3cqos1);
writel(0x20302030, &s3c_qos->s3cqos2);
@@ -166,7 +175,7 @@ void qos_init(void)
/* DBSC -QoS */
/* DBSC0 - Read */
for (i = DBSC3_00; i < DBSC3_NR; i++) {
- qos_addr = (struct r8a7791_dbsc3_qos *)dbsc3_0_r_qos_addr[i];
+ qos_addr = (struct rcar_dbsc3_qos *)dbsc3_0_r_qos_addr[i];
writel(0x00000002, &qos_addr->dblgcnt);
writel(0x00002096, &qos_addr->dbtmval0);
writel(0x00002064, &qos_addr->dbtmval1);
@@ -181,7 +190,7 @@ void qos_init(void)
/* DBSC0 - Write */
for (i = DBSC3_00; i < DBSC3_NR; i++) {
- qos_addr = (struct r8a7791_dbsc3_qos *)dbsc3_0_w_qos_addr[i];
+ qos_addr = (struct rcar_dbsc3_qos *)dbsc3_0_w_qos_addr[i];
writel(0x00000002, &qos_addr->dblgcnt);
writel(0x000020EB, &qos_addr->dbtmval0);
writel(0x0000206E, &qos_addr->dbtmval1);
@@ -196,7 +205,7 @@ void qos_init(void)
/* DBSC1 - Read */
for (i = DBSC3_00; i < DBSC3_NR; i++) {
- qos_addr = (struct r8a7791_dbsc3_qos *)dbsc3_1_r_qos_addr[i];
+ qos_addr = (struct rcar_dbsc3_qos *)dbsc3_1_r_qos_addr[i];
writel(0x00000002, &qos_addr->dblgcnt);
writel(0x00002096, &qos_addr->dbtmval0);
writel(0x00002064, &qos_addr->dbtmval1);
@@ -211,7 +220,7 @@ void qos_init(void)
/* DBSC1 - Write */
for (i = DBSC3_00; i < DBSC3_NR; i++) {
- qos_addr = (struct r8a7791_dbsc3_qos *)dbsc3_1_w_qos_addr[i];
+ qos_addr = (struct rcar_dbsc3_qos *)dbsc3_1_w_qos_addr[i];
writel(0x00000002, &qos_addr->dblgcnt);
writel(0x000020EB, &qos_addr->dbtmval0);
writel(0x0000206E, &qos_addr->dbtmval1);
@@ -232,14 +241,14 @@ void qos_init(void)
/* MXI -QoS */
/* Transaction Control (MXI) */
- mxi = (struct r8a7791_mxi *)MXI_BASE;
+ mxi = (struct rcar_mxi *)MXI_BASE;
writel(0x00000013, &mxi->mxrtcr);
writel(0x00000013, &mxi->mxwtcr);
writel(0x00780080, &mxi->mxsaar0);
writel(0x02000800, &mxi->mxsaar1);
/* QoS Control (MXI) */
- mxi_qos = (struct r8a7791_mxi_qos *)MXI_QOS_BASE;
+ mxi_qos = (struct rcar_mxi_qos *)MXI_QOS_BASE;
writel(0x0000000C, &mxi_qos->vspdu0);
writel(0x0000000C, &mxi_qos->vspdu1);
writel(0x0000000D, &mxi_qos->du0);
@@ -247,7 +256,7 @@ void qos_init(void)
/* AXI -QoS */
/* Transaction Control (MXI) */
- axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_SYX64TO128_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_SYX64TO128_BASE;
writel(0x00000002, &axi_qos->qosconf);
writel(0x00002245, &axi_qos->qosctset0);
writel(0x00002096, &axi_qos->qosctset1);
@@ -259,7 +268,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_AVB_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_AVB_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x000020A6, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -268,7 +277,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_G2D_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_G2D_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x000020A6, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -277,7 +286,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_IMP0_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_IMP0_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x00002021, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -286,7 +295,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_IMP1_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_IMP1_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x00002037, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -295,7 +304,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_IMUX0_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_IMUX0_BASE;
writel(0x00000002, &axi_qos->qosconf);
writel(0x00002245, &axi_qos->qosctset0);
writel(0x00002096, &axi_qos->qosctset1);
@@ -307,7 +316,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_IMUX1_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_IMUX1_BASE;
writel(0x00000002, &axi_qos->qosconf);
writel(0x00002245, &axi_qos->qosctset0);
writel(0x00002096, &axi_qos->qosctset1);
@@ -319,7 +328,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_IMUX2_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_IMUX2_BASE;
writel(0x00000002, &axi_qos->qosconf);
writel(0x00002245, &axi_qos->qosctset0);
writel(0x00002096, &axi_qos->qosctset1);
@@ -331,7 +340,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_LBS_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_LBS_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x0000214C, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -340,7 +349,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_MMUDS_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUDS_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002004, &axi_qos->qosctset0);
writel(0x00002096, &axi_qos->qosctset1);
@@ -352,7 +361,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_MMUM_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUM_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002004, &axi_qos->qosctset0);
writel(0x00002096, &axi_qos->qosctset1);
@@ -364,7 +373,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_MMUR_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUR_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002004, &axi_qos->qosctset0);
writel(0x00002096, &axi_qos->qosctset1);
@@ -376,7 +385,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_MMUS0_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUS0_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002004, &axi_qos->qosctset0);
writel(0x00002096, &axi_qos->qosctset1);
@@ -388,7 +397,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_MMUS1_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUS1_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002004, &axi_qos->qosctset0);
writel(0x00002096, &axi_qos->qosctset1);
@@ -400,7 +409,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_MTSB0_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_MTSB0_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x00002021, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -409,7 +418,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_MTSB1_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_MTSB1_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x00002021, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -418,7 +427,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_PCI_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_PCI_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x0000214C, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -427,7 +436,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_RTX_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_RTX_BASE;
writel(0x00000002, &axi_qos->qosconf);
writel(0x00002245, &axi_qos->qosctset0);
writel(0x00002096, &axi_qos->qosctset1);
@@ -439,7 +448,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_SDS0_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_SDS0_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x000020A6, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -448,7 +457,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_SDS1_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_SDS1_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x000020A6, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -457,7 +466,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_USB20_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_USB20_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x00002053, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -466,7 +475,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_USB21_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_USB21_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x00002053, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -475,7 +484,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_USB22_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_USB22_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x00002053, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -484,7 +493,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_USB30_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_USB30_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x0000214C, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -493,7 +502,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_AX2M_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_AX2M_BASE;
writel(0x00000002, &axi_qos->qosconf);
writel(0x00002245, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -502,7 +511,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_CC50_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_CC50_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x00002029, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -511,7 +520,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_CCI_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_CCI_BASE;
writel(0x00000002, &axi_qos->qosconf);
writel(0x00002245, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -520,7 +529,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_CS_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_CS_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x00002053, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -529,7 +538,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_DDM_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_DDM_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x000020A6, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -538,7 +547,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_ETH_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_ETH_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x00002053, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -547,7 +556,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_MPXM_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_MPXM_BASE;
writel(0x00000002, &axi_qos->qosconf);
writel(0x00002245, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -556,7 +565,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_SAT0_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_SAT0_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x00002053, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -565,7 +574,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_SAT1_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_SAT1_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x00002053, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -574,7 +583,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_SDM0_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_SDM0_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x0000214C, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -583,7 +592,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_SDM1_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_SDM1_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x0000214C, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -592,7 +601,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_TRAB_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_TRAB_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x000020A6, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -601,7 +610,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_UDM0_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_UDM0_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x00002053, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -610,7 +619,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)SYS_AXI_UDM1_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_UDM1_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x00002053, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -620,7 +629,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosqon);
/* QoS Register (RT-AXI) */
- axi_qos = (struct r8a7791_axi_qos *)RT_AXI_SHX_BASE;
+ axi_qos = (struct rcar_axi_qos *)RT_AXI_SHX_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x00002053, &axi_qos->qosctset0);
writel(0x00002096, &axi_qos->qosctset1);
@@ -632,7 +641,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)RT_AXI_DBG_BASE;
+ axi_qos = (struct rcar_axi_qos *)RT_AXI_DBG_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x00002053, &axi_qos->qosctset0);
writel(0x00002096, &axi_qos->qosctset1);
@@ -644,7 +653,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)RT_AXI_RDM_BASE;
+ axi_qos = (struct rcar_axi_qos *)RT_AXI_RDM_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x00002299, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -653,7 +662,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)RT_AXI_RDS_BASE;
+ axi_qos = (struct rcar_axi_qos *)RT_AXI_RDS_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x00002029, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -662,7 +671,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)RT_AXI_RTX64TO128_BASE;
+ axi_qos = (struct rcar_axi_qos *)RT_AXI_RTX64TO128_BASE;
writel(0x00000002, &axi_qos->qosconf);
writel(0x00002245, &axi_qos->qosctset0);
writel(0x00002096, &axi_qos->qosctset1);
@@ -674,7 +683,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)RT_AXI_STPRO_BASE;
+ axi_qos = (struct rcar_axi_qos *)RT_AXI_STPRO_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x00002029, &axi_qos->qosctset0);
writel(0x00002096, &axi_qos->qosctset1);
@@ -686,12 +695,9 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)RT_AXI_SY2RT_BASE;
+ axi_qos = (struct rcar_axi_qos *)RT_AXI_SY2RT_BASE;
writel(0x00000002, &axi_qos->qosconf);
writel(0x00002245, &axi_qos->qosctset0);
- writel(0x00002096, &axi_qos->qosctset1);
- writel(0x00002030, &axi_qos->qosctset2);
- writel(0x00002030, &axi_qos->qosctset3);
writel(0x00000001, &axi_qos->qosreqctr);
writel(0x00002064, &axi_qos->qosthres0);
writel(0x00002004, &axi_qos->qosthres1);
@@ -699,7 +705,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosqon);
/* QoS Register (MP-AXI) */
- axi_qos = (struct r8a7791_axi_qos *)MP_AXI_ADSP_BASE;
+ axi_qos = (struct rcar_axi_qos *)MP_AXI_ADSP_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x00002037, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -708,34 +714,34 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)MP_AXI_ASDS0_BASE;
+ axi_qos = (struct rcar_axi_qos *)MP_AXI_ASDS0_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002014, &axi_qos->qosctset0);
- writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00000040, &axi_qos->qosreqctr);
writel(0x00002064, &axi_qos->qosthres0);
writel(0x00002004, &axi_qos->qosthres1);
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)MP_AXI_ASDS1_BASE;
+ axi_qos = (struct rcar_axi_qos *)MP_AXI_ASDS1_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002014, &axi_qos->qosctset0);
- writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00000040, &axi_qos->qosreqctr);
writel(0x00002064, &axi_qos->qosthres0);
writel(0x00002004, &axi_qos->qosthres1);
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)MP_AXI_MLP_BASE;
- writel(0x00000000, &axi_qos->qosconf);
- writel(0x00002014, &axi_qos->qosctset0);
- writel(0x00000001, &axi_qos->qosreqctr);
+ axi_qos = (struct rcar_axi_qos *)MP_AXI_MLP_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00001FF0, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
writel(0x00002064, &axi_qos->qosthres0);
writel(0x00002004, &axi_qos->qosthres1);
- writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00002001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)MP_AXI_MMUMP_BASE;
+ axi_qos = (struct rcar_axi_qos *)MP_AXI_MMUMP_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002004, &axi_qos->qosctset0);
writel(0x00002096, &axi_qos->qosctset1);
@@ -747,7 +753,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)MP_AXI_SPU_BASE;
+ axi_qos = (struct rcar_axi_qos *)MP_AXI_SPU_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x00002053, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -756,7 +762,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)MP_AXI_SPUC_BASE;
+ axi_qos = (struct rcar_axi_qos *)MP_AXI_SPUC_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x0000206E, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -766,9 +772,12 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosqon);
/* QoS Register (SYS-AXI256) */
- axi_qos = (struct r8a7791_axi_qos *)SYS_AXI256_AXI128TO256_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI256_AXI128TO256_BASE;
writel(0x00000002, &axi_qos->qosconf);
- writel(0x00002245, &axi_qos->qosctset0);
+ if (IS_R8A7791_ES2())
+ writel(0x000020EB, &axi_qos->qosctset0);
+ else
+ writel(0x00002245, &axi_qos->qosctset0);
writel(0x00002096, &axi_qos->qosctset1);
writel(0x00002030, &axi_qos->qosctset2);
writel(0x00002030, &axi_qos->qosctset3);
@@ -778,9 +787,12 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)SYS_AXI256_SYX_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI256_SYX_BASE;
writel(0x00000002, &axi_qos->qosconf);
- writel(0x00002245, &axi_qos->qosctset0);
+ if (IS_R8A7791_ES2())
+ writel(0x000020EB, &axi_qos->qosctset0);
+ else
+ writel(0x00002245, &axi_qos->qosctset0);
writel(0x00002096, &axi_qos->qosctset1);
writel(0x00002030, &axi_qos->qosctset2);
writel(0x00002030, &axi_qos->qosctset3);
@@ -790,9 +802,12 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)SYS_AXI256_MPX_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI256_MPX_BASE;
writel(0x00000002, &axi_qos->qosconf);
- writel(0x00002245, &axi_qos->qosctset0);
+ if (IS_R8A7791_ES2())
+ writel(0x000020EB, &axi_qos->qosctset0);
+ else
+ writel(0x00002245, &axi_qos->qosctset0);
writel(0x00002096, &axi_qos->qosctset1);
writel(0x00002030, &axi_qos->qosctset2);
writel(0x00002030, &axi_qos->qosctset3);
@@ -802,7 +817,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)SYS_AXI256_MXI_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI256_MXI_BASE;
writel(0x00000002, &axi_qos->qosconf);
writel(0x00002245, &axi_qos->qosctset0);
writel(0x00002096, &axi_qos->qosctset1);
@@ -815,7 +830,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosqon);
/* QoS Register (CCI-AXI) */
- axi_qos = (struct r8a7791_axi_qos *)CCI_AXI_MMUS0_BASE;
+ axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUS0_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002004, &axi_qos->qosctset0);
writel(0x00002096, &axi_qos->qosctset1);
@@ -827,7 +842,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)CCI_AXI_SYX2_BASE;
+ axi_qos = (struct rcar_axi_qos *)CCI_AXI_SYX2_BASE;
writel(0x00000002, &axi_qos->qosconf);
writel(0x00002245, &axi_qos->qosctset0);
writel(0x00002096, &axi_qos->qosctset1);
@@ -839,7 +854,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)CCI_AXI_MMUR_BASE;
+ axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUR_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002004, &axi_qos->qosctset0);
writel(0x00002096, &axi_qos->qosctset1);
@@ -851,7 +866,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)CCI_AXI_MMUDS_BASE;
+ axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUDS_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002004, &axi_qos->qosctset0);
writel(0x00002096, &axi_qos->qosctset1);
@@ -863,7 +878,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)CCI_AXI_MMUM_BASE;
+ axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUM_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002004, &axi_qos->qosctset0);
writel(0x00002096, &axi_qos->qosctset1);
@@ -875,7 +890,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)CCI_AXI_MXI_BASE;
+ axi_qos = (struct rcar_axi_qos *)CCI_AXI_MXI_BASE;
writel(0x00000002, &axi_qos->qosconf);
writel(0x00002245, &axi_qos->qosctset0);
writel(0x00002096, &axi_qos->qosctset1);
@@ -887,7 +902,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)CCI_AXI_MMUS1_BASE;
+ axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUS1_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002004, &axi_qos->qosctset0);
writel(0x00002096, &axi_qos->qosctset1);
@@ -899,7 +914,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)CCI_AXI_MMUMP_BASE;
+ axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUMP_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002004, &axi_qos->qosctset0);
writel(0x00002096, &axi_qos->qosctset1);
@@ -912,7 +927,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosqon);
/* QoS Register (Media-AXI) */
- axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_MXR_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_MXR_BASE;
writel(0x00000002, &axi_qos->qosconf);
writel(0x000020DC, &axi_qos->qosctset0);
writel(0x00002096, &axi_qos->qosctset1);
@@ -923,7 +938,7 @@ void qos_init(void)
writel(0x00002032, &axi_qos->qosthres1);
writel(0x00000001, &axi_qos->qosthres2);
- axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_MXW_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_MXW_BASE;
writel(0x00000002, &axi_qos->qosconf);
writel(0x000020DC, &axi_qos->qosctset0);
writel(0x00002096, &axi_qos->qosctset1);
@@ -934,7 +949,7 @@ void qos_init(void)
writel(0x00002032, &axi_qos->qosthres1);
writel(0x00000001, &axi_qos->qosthres2);
- axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_JPR_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_JPR_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002190, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -943,16 +958,21 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_JPW_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_JPW_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002190, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
- writel(0x00002064, &axi_qos->qosthres0);
- writel(0x00002004, &axi_qos->qosthres1);
+ if (IS_R8A7791_ES2()) {
+ writel(0x00000001, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ } else {
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ }
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_TDMR_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_TDMR_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002190, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -961,7 +981,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_TDMW_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_TDMW_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002190, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -970,7 +990,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VSP1CR_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP1CR_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002190, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -979,16 +999,21 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VSP1CW_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP1CW_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002190, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
- writel(0x00002064, &axi_qos->qosthres0);
- writel(0x00002004, &axi_qos->qosthres1);
+ if (IS_R8A7791_ES2()) {
+ writel(0x00000001, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ } else {
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ }
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VSPDU0CR_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPDU0CR_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002190, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -997,16 +1022,21 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VSPDU0CW_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPDU0CW_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002190, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
- writel(0x00002064, &axi_qos->qosthres0);
- writel(0x00002004, &axi_qos->qosthres1);
+ if (IS_R8A7791_ES2()) {
+ writel(0x00000001, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ } else {
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ }
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VSPDU1CR_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPDU1CR_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002190, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -1015,25 +1045,36 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VSPDU1CW_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPDU1CW_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002190, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
- writel(0x00002064, &axi_qos->qosthres0);
- writel(0x00002004, &axi_qos->qosthres1);
+ if (IS_R8A7791_ES2()) {
+ writel(0x00000001, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ } else {
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ }
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VIN0W_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VIN0W_BASE;
writel(0x00000001, &axi_qos->qosconf);
- writel(0x000020C8, &axi_qos->qosctset0);
+ if (IS_R8A7791_ES2())
+ writel(0x00001FF0, &axi_qos->qosctset0);
+ else
+ writel(0x000020C8, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
writel(0x00002064, &axi_qos->qosthres0);
writel(0x00002004, &axi_qos->qosthres1);
- writel(0x00000001, &axi_qos->qosthres2);
+ if (IS_R8A7791_ES2())
+ writel(0x00002001, &axi_qos->qosthres2);
+ else
+ writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_FDP0R_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_FDP0R_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x000020C8, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -1042,16 +1083,21 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_FDP0W_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_FDP0W_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x000020C8, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
- writel(0x00002064, &axi_qos->qosthres0);
- writel(0x00002004, &axi_qos->qosthres1);
+ if (IS_R8A7791_ES2()) {
+ writel(0x00000001, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ } else {
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ }
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_IMSR_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_IMSR_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x000020C8, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -1060,7 +1106,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_IMSW_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_IMSW_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x000020C8, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -1069,7 +1115,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VSP1R_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP1R_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x000020C8, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -1078,16 +1124,21 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VSP1W_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP1W_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x000020C8, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
- writel(0x00002064, &axi_qos->qosthres0);
- writel(0x00002004, &axi_qos->qosthres1);
+ if (IS_R8A7791_ES2()) {
+ writel(0x00000001, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ } else {
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ }
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_FDP1R_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_FDP1R_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x000020C8, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -1096,16 +1147,21 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_FDP1W_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_FDP1W_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x000020C8, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
- writel(0x00002064, &axi_qos->qosthres0);
- writel(0x00002004, &axi_qos->qosthres1);
+ if (IS_R8A7791_ES2()) {
+ writel(0x00000001, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ } else {
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ }
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_IMRR_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_IMRR_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x000020C8, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -1114,7 +1170,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_IMRW_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_IMRW_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x000020C8, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -1123,40 +1179,55 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VSPD0R_BASE;
- writel(0x00000000, &axi_qos->qosconf);
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPD0R_BASE;
+ if (IS_R8A7791_ES2())
+ writel(0x00000003, &axi_qos->qosconf);
+ else
+ writel(0x00000000, &axi_qos->qosconf);
writel(0x000020C8, &axi_qos->qosctset0);
writel(0x00002064, &axi_qos->qosthres0);
writel(0x00002004, &axi_qos->qosthres1);
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VSPD0W_BASE;
- writel(0x00000000, &axi_qos->qosconf);
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPD0W_BASE;
+ if (IS_R8A7791_ES2())
+ writel(0x00000003, &axi_qos->qosconf);
+ else
+ writel(0x00000000, &axi_qos->qosconf);
writel(0x000020C8, &axi_qos->qosctset0);
writel(0x00002064, &axi_qos->qosthres0);
writel(0x00002004, &axi_qos->qosthres1);
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VSPD1R_BASE;
- writel(0x00000000, &axi_qos->qosconf);
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPD1R_BASE;
+ if (IS_R8A7791_ES2())
+ writel(0x00000003, &axi_qos->qosconf);
+ else
+ writel(0x00000000, &axi_qos->qosconf);
writel(0x000020C8, &axi_qos->qosctset0);
writel(0x00002064, &axi_qos->qosthres0);
writel(0x00002004, &axi_qos->qosthres1);
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VSPD1W_BASE;
- writel(0x00000000, &axi_qos->qosconf);
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPD1W_BASE;
+ if (IS_R8A7791_ES2())
+ writel(0x00000003, &axi_qos->qosconf);
+ else
+ writel(0x00000000, &axi_qos->qosconf);
writel(0x000020C8, &axi_qos->qosctset0);
writel(0x00002064, &axi_qos->qosthres0);
writel(0x00002004, &axi_qos->qosthres1);
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_DU0R_BASE;
- writel(0x00000000, &axi_qos->qosconf);
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_DU0R_BASE;
+ if (IS_R8A7791_ES2())
+ writel(0x00000003, &axi_qos->qosconf);
+ else
+ writel(0x00000000, &axi_qos->qosconf);
writel(0x00002063, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
writel(0x00002064, &axi_qos->qosthres0);
@@ -1164,8 +1235,11 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_DU0W_BASE;
- writel(0x00000000, &axi_qos->qosconf);
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_DU0W_BASE;
+ if (IS_R8A7791_ES2())
+ writel(0x00000000, &axi_qos->qosconf);
+ else
+ writel(0x00000000, &axi_qos->qosconf);
writel(0x00002063, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
writel(0x00002064, &axi_qos->qosthres0);
@@ -1173,7 +1247,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VCP0CR_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP0CR_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002073, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -1182,16 +1256,21 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VCP0CW_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP0CW_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002073, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
- writel(0x00002064, &axi_qos->qosthres0);
- writel(0x00002004, &axi_qos->qosthres1);
+ if (IS_R8A7791_ES2()) {
+ writel(0x00000001, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ } else {
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ }
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VCP0VR_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP0VR_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002073, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -1200,16 +1279,21 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VCP0VW_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP0VW_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002073, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
- writel(0x00002064, &axi_qos->qosthres0);
- writel(0x00002004, &axi_qos->qosthres1);
+ if (IS_R8A7791_ES2()) {
+ writel(0x00000001, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ } else {
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ }
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7791_axi_qos *)MEDIA_AXI_VPC0R_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VPC0R_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002073, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
diff --git a/board/renesas/lager/lager.c b/board/renesas/lager/lager.c
index ad5289a..a5a0474 100644
--- a/board/renesas/lager/lager.c
+++ b/board/renesas/lager/lager.c
@@ -24,181 +24,23 @@
DECLARE_GLOBAL_DATA_PTR;
-#define s_init_wait(cnt) \
- ({ \
- u32 i = 0x10000 * cnt; \
- while (i > 0) \
- i--; \
- })
-
-#define dbpdrgd_check(bsc) \
- ({ \
- while ((readl(&bsc->dbpdrgd) & 0x1) != 0x1) \
- ; \
- })
-
-#if defined(CONFIG_NORFLASH)
-static void bsc_init(void)
-{
- struct r8a7790_lbsc *lbsc = (struct r8a7790_lbsc *)LBSC_BASE;
- struct r8a7790_dbsc3 *dbsc3_0 = (struct r8a7790_dbsc3 *)DBSC3_0_BASE;
-
- /* LBSC */
- writel(0x00000020, &lbsc->cs0ctrl);
- writel(0x00000020, &lbsc->cs1ctrl);
- writel(0x00002020, &lbsc->ecs0ctrl);
- writel(0x00002020, &lbsc->ecs1ctrl);
-
- writel(0x077F077F, &lbsc->cswcr0);
- writel(0x077F077F, &lbsc->cswcr1);
- writel(0x077F077F, &lbsc->ecswcr0);
- writel(0x077F077F, &lbsc->ecswcr1);
-
- /* DBSC3 */
- s_init_wait(10);
-
- writel(0x0000A55A, &dbsc3_0->dbpdlck);
- writel(0x00000001, &dbsc3_0->dbpdrga);
- writel(0x80000000, &dbsc3_0->dbpdrgd);
- writel(0x00000004, &dbsc3_0->dbpdrga);
- dbpdrgd_check(dbsc3_0);
-
- writel(0x00000006, &dbsc3_0->dbpdrga);
- writel(0x0001C000, &dbsc3_0->dbpdrgd);
-
- writel(0x00000023, &dbsc3_0->dbpdrga);
- writel(0x00FD2480, &dbsc3_0->dbpdrgd);
-
- writel(0x00000010, &dbsc3_0->dbpdrga);
- writel(0xF004649B, &dbsc3_0->dbpdrgd);
-
- writel(0x0000000F, &dbsc3_0->dbpdrga);
- writel(0x00181EE4, &dbsc3_0->dbpdrgd);
-
- writel(0x0000000E, &dbsc3_0->dbpdrga);
- writel(0x33C03812, &dbsc3_0->dbpdrgd);
-
- writel(0x00000003, &dbsc3_0->dbpdrga);
- writel(0x0300C481, &dbsc3_0->dbpdrgd);
-
- writel(0x00000007, &dbsc3_0->dbkind);
- writel(0x10030A02, &dbsc3_0->dbconf0);
- writel(0x00000001, &dbsc3_0->dbphytype);
- writel(0x00000000, &dbsc3_0->dbbl);
- writel(0x0000000B, &dbsc3_0->dbtr0);
- writel(0x00000008, &dbsc3_0->dbtr1);
- writel(0x00000000, &dbsc3_0->dbtr2);
- writel(0x0000000B, &dbsc3_0->dbtr3);
- writel(0x000C000B, &dbsc3_0->dbtr4);
- writel(0x00000027, &dbsc3_0->dbtr5);
- writel(0x0000001C, &dbsc3_0->dbtr6);
- writel(0x00000005, &dbsc3_0->dbtr7);
- writel(0x00000018, &dbsc3_0->dbtr8);
- writel(0x00000008, &dbsc3_0->dbtr9);
- writel(0x0000000C, &dbsc3_0->dbtr10);
- writel(0x00000009, &dbsc3_0->dbtr11);
- writel(0x00000012, &dbsc3_0->dbtr12);
- writel(0x000000D0, &dbsc3_0->dbtr13);
- writel(0x00140005, &dbsc3_0->dbtr14);
- writel(0x00050004, &dbsc3_0->dbtr15);
- writel(0x70233005, &dbsc3_0->dbtr16);
- writel(0x000C0000, &dbsc3_0->dbtr17);
- writel(0x00000300, &dbsc3_0->dbtr18);
- writel(0x00000040, &dbsc3_0->dbtr19);
- writel(0x00000001, &dbsc3_0->dbrnk0);
- writel(0x00020001, &dbsc3_0->dbadj0);
- writel(0x20082008, &dbsc3_0->dbadj2);
- writel(0x00020002, &dbsc3_0->dbwt0cnf0);
- writel(0x0000000F, &dbsc3_0->dbwt0cnf4);
-
- writel(0x00000015, &dbsc3_0->dbpdrga);
- writel(0x00000D70, &dbsc3_0->dbpdrgd);
-
- writel(0x00000016, &dbsc3_0->dbpdrga);
- writel(0x00000006, &dbsc3_0->dbpdrgd);
-
- writel(0x00000017, &dbsc3_0->dbpdrga);
- writel(0x00000018, &dbsc3_0->dbpdrgd);
-
- writel(0x00000012, &dbsc3_0->dbpdrga);
- writel(0x9D5CBB66, &dbsc3_0->dbpdrgd);
-
- writel(0x00000013, &dbsc3_0->dbpdrga);
- writel(0x1A868300, &dbsc3_0->dbpdrgd);
-
- writel(0x00000023, &dbsc3_0->dbpdrga);
- writel(0x00FDB6C0, &dbsc3_0->dbpdrgd);
-
- writel(0x00000014, &dbsc3_0->dbpdrga);
- writel(0x300214D8, &dbsc3_0->dbpdrgd);
-
- writel(0x0000001A, &dbsc3_0->dbpdrga);
- writel(0x930035C7, &dbsc3_0->dbpdrgd);
-
- writel(0x00000060, &dbsc3_0->dbpdrga);
- writel(0x330657B2, &dbsc3_0->dbpdrgd);
-
- writel(0x00000011, &dbsc3_0->dbpdrga);
- writel(0x1000040B, &dbsc3_0->dbpdrgd);
-
- writel(0x0000FA00, &dbsc3_0->dbcmd);
- writel(0x00000001, &dbsc3_0->dbpdrga);
- writel(0x00000071, &dbsc3_0->dbpdrgd);
-
- writel(0x00000004, &dbsc3_0->dbpdrga);
- dbpdrgd_check(dbsc3_0);
-
- writel(0x0000FA00, &dbsc3_0->dbcmd);
- writel(0x2100FA00, &dbsc3_0->dbcmd);
- writel(0x0000FA00, &dbsc3_0->dbcmd);
- writel(0x0000FA00, &dbsc3_0->dbcmd);
- writel(0x0000FA00, &dbsc3_0->dbcmd);
- writel(0x0000FA00, &dbsc3_0->dbcmd);
- writel(0x0000FA00, &dbsc3_0->dbcmd);
- writel(0x0000FA00, &dbsc3_0->dbcmd);
- writel(0x0000FA00, &dbsc3_0->dbcmd);
-
- writel(0x110000DB, &dbsc3_0->dbcmd);
-
- writel(0x00000001, &dbsc3_0->dbpdrga);
- writel(0x00000181, &dbsc3_0->dbpdrgd);
-
- writel(0x00000004, &dbsc3_0->dbpdrga);
- dbpdrgd_check(dbsc3_0);
-
- writel(0x00000001, &dbsc3_0->dbpdrga);
- writel(0x0000FE01, &dbsc3_0->dbpdrgd);
-
- writel(0x00000004, &dbsc3_0->dbpdrga);
- dbpdrgd_check(dbsc3_0);
-
- writel(0x00000000, &dbsc3_0->dbbs0cnt1);
- writel(0x01004C20, &dbsc3_0->dbcalcnf);
- writel(0x014000AA, &dbsc3_0->dbcaltr);
- writel(0x00000140, &dbsc3_0->dbrfcnf0);
- writel(0x00081860, &dbsc3_0->dbrfcnf1);
- writel(0x00010000, &dbsc3_0->dbrfcnf2);
- writel(0x00000001, &dbsc3_0->dbrfen);
- writel(0x00000001, &dbsc3_0->dbacen);
-}
-#else
-#define bsc_init() do {} while (0)
-#endif /* CONFIG_NORFLASH */
-
+#define CLK2MHZ(clk) (clk / 1000 / 1000)
void s_init(void)
{
- struct r8a7790_rwdt *rwdt = (struct r8a7790_rwdt *)RWDT_BASE;
- struct r8a7790_swdt *swdt = (struct r8a7790_swdt *)SWDT_BASE;
+ struct rcar_rwdt *rwdt = (struct rcar_rwdt *)RWDT_BASE;
+ struct rcar_swdt *swdt = (struct rcar_swdt *)SWDT_BASE;
+ u32 stc;
/* Watchdog init */
writel(0xA5A5A500, &rwdt->rwtcsra);
writel(0xA5A5A500, &swdt->swtcsra);
+ /* CPU frequency setting. Set to 1.4GHz */
+ stc = ((1500 / CLK2MHZ(CONFIG_SYS_CLK_FREQ)) - 1) << PLL0_STC_BIT;
+ clrsetbits_le32(PLL0CR, PLL0_STC_MASK, stc);
+
/* QoS(Quality-of-Service) Init */
qos_init();
-
- /* BSC init */
- bsc_init();
}
#define MSTPSR1 0xE6150038
@@ -213,18 +55,6 @@ void s_init(void)
#define SMSTPCR8 0xE6150990
#define ETHER_MSTP813 (1 << 13)
-#define PMMR 0xE6060000
-#define GPSR4 0xE6060014
-#define IPSR14 0xE6060058
-
-#define set_guard_reg(addr, mask, value) \
-{ \
- u32 val; \
- val = (readl(addr) & ~(mask)) | (value); \
- writel(~val, PMMR); \
- writel(val, addr); \
-}
-
#define mstp_setbits(type, addr, saddr, set) \
out_##type((saddr), in_##type(addr) | (set))
#define mstp_clrbits(type, addr, saddr, clear) \
@@ -238,16 +68,8 @@ int board_early_init_f(void)
{
/* TMU0 */
mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125);
-
-#if defined(CONFIG_NORFLASH)
/* SCIF0 */
- set_guard_reg(GPSR4, 0x34000000, 0x00000000);
- set_guard_reg(IPSR14, 0x00000FC7, 0x00000481);
- set_guard_reg(GPSR4, 0x00000000, 0x34000000);
-#endif
-
mstp_clrbits_le32(MSTPSR7, SMSTPCR7, SCIF0_MSTP721);
-
/* ETHER */
mstp_clrbits_le32(MSTPSR8, SMSTPCR8, ETHER_MSTP813);
@@ -263,8 +85,6 @@ void arch_preboot_os(void)
DECLARE_GLOBAL_DATA_PTR;
int board_init(void)
{
- /* board id for linux */
- gd->bd->bi_arch_number = MACH_TYPE_LAGER;
/* adress of boot parameters */
gd->bd->bi_boot_params = LAGER_SDRAM_BASE + 0x100;
diff --git a/board/renesas/lager/qos.c b/board/renesas/lager/qos.c
index b88511a..3742757 100644
--- a/board/renesas/lager/qos.c
+++ b/board/renesas/lager/qos.c
@@ -1,7 +1,7 @@
/*
* board/renesas/lager/qos.c
*
- * Copyright (C) 2013 Renesas Electronics Corporation
+ * Copyright (C) 2013,2014 Renesas Electronics Corporation
*
* SPDX-License-Identifier: GPL-2.0
*/
@@ -12,7 +12,7 @@
#include <asm/io.h>
#include <asm/arch/rmobile.h>
-/* QoS version 0.954 */
+/* QoS version 0.955 */
enum {
DBSC3_R00, DBSC3_R01, DBSC3_R02, DBSC3_R03, DBSC3_R04,
@@ -64,24 +64,24 @@ static const u32 dbsc3_qos_addr[DBSC3_NR] = {
void qos_init(void)
{
int i;
- struct r8a7790_s3c *s3c;
- struct r8a7790_s3c_qos *s3c_qos;
- struct r8a7790_dbsc3_qos *qos_addr;
- struct r8a7790_mxi *mxi;
- struct r8a7790_mxi_qos *mxi_qos;
- struct r8a7790_axi_qos *axi_qos;
+ struct rcar_s3c *s3c;
+ struct rcar_s3c_qos *s3c_qos;
+ struct rcar_dbsc3_qos *qos_addr;
+ struct rcar_mxi *mxi;
+ struct rcar_mxi_qos *mxi_qos;
+ struct rcar_axi_qos *axi_qos;
/* DBSC DBADJ2 */
writel(0x20042004, DBSC3_0_DBADJ2);
/* S3C -QoS */
- s3c = (struct r8a7790_s3c *)S3C_BASE;
+ s3c = (struct rcar_s3c *)S3C_BASE;
writel(0x80FF1C1E, &s3c->s3cadsplcr);
writel(0x1F060505, &s3c->s3crorr);
writel(0x1F020100, &s3c->s3cworr);
/* QoS Control Registers */
- s3c_qos = (struct r8a7790_s3c_qos *)S3C_QOS_CCI0_BASE;
+ s3c_qos = (struct rcar_s3c_qos *)S3C_QOS_CCI0_BASE;
writel(0x00800080, &s3c_qos->s3cqos0);
writel(0x22000010, &s3c_qos->s3cqos1);
writel(0x22002200, &s3c_qos->s3cqos2);
@@ -92,7 +92,7 @@ void qos_init(void)
writel(0x2F002200, &s3c_qos->s3cqos7);
writel(0x2F002F00, &s3c_qos->s3cqos8);
- s3c_qos = (struct r8a7790_s3c_qos *)S3C_QOS_CCI1_BASE;
+ s3c_qos = (struct rcar_s3c_qos *)S3C_QOS_CCI1_BASE;
writel(0x00800080, &s3c_qos->s3cqos0);
writel(0x22000010, &s3c_qos->s3cqos1);
writel(0x22002200, &s3c_qos->s3cqos2);
@@ -103,7 +103,7 @@ void qos_init(void)
writel(0x2F002200, &s3c_qos->s3cqos7);
writel(0x2F002F00, &s3c_qos->s3cqos8);
- s3c_qos = (struct r8a7790_s3c_qos *)S3C_QOS_MXI_BASE;
+ s3c_qos = (struct rcar_s3c_qos *)S3C_QOS_MXI_BASE;
writel(0x80918099, &s3c_qos->s3cqos0);
writel(0x20410010, &s3c_qos->s3cqos1);
writel(0x200A2023, &s3c_qos->s3cqos2);
@@ -114,7 +114,7 @@ void qos_init(void)
writel(0x20502001, &s3c_qos->s3cqos7);
writel(0x20142032, &s3c_qos->s3cqos8);
- s3c_qos = (struct r8a7790_s3c_qos *)S3C_QOS_AXI_BASE;
+ s3c_qos = (struct rcar_s3c_qos *)S3C_QOS_AXI_BASE;
writel(0x00810089, &s3c_qos->s3cqos0);
writel(0x20410001, &s3c_qos->s3cqos1);
@@ -131,7 +131,7 @@ void qos_init(void)
/* DBSC -QoS */
/* DBSC0 - Read/Write */
for (i = DBSC3_R00; i < DBSC3_NR; i++) {
- qos_addr = (struct r8a7790_dbsc3_qos *)dbsc3_qos_addr[i];
+ qos_addr = (struct rcar_dbsc3_qos *)dbsc3_qos_addr[i];
writel(0x00000203, &qos_addr->dblgcnt);
writel(0x00002064, &qos_addr->dbtmval0);
writel(0x00002048, &qos_addr->dbtmval1);
@@ -151,7 +151,7 @@ void qos_init(void)
/* MXI -QoS */
/* Transaction Control (MXI) */
- mxi = (struct r8a7790_mxi *)MXI_BASE;
+ mxi = (struct rcar_mxi *)MXI_BASE;
writel(0x00000013, &mxi->mxrtcr);
writel(0x00000013, &mxi->mxwtcr);
writel(0x00B800C0, &mxi->mxsaar0);
@@ -162,7 +162,7 @@ void qos_init(void)
writel(0x00200000, &mxi->mxaxiwacr);
/* QoS Control (MXI) */
- mxi_qos = (struct r8a7790_mxi_qos *)MXI_QOS_BASE;
+ mxi_qos = (struct rcar_mxi_qos *)MXI_QOS_BASE;
writel(0x0000000C, &mxi_qos->vspdu0);
writel(0x0000000C, &mxi_qos->vspdu1);
writel(0x0000000D, &mxi_qos->du0);
@@ -170,7 +170,7 @@ void qos_init(void)
/* AXI -QoS */
/* Transaction Control (MXI) */
- axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_SYX64TO128_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_SYX64TO128_BASE;
writel(0x00000002, &axi_qos->qosconf);
writel(0x0000200F, &axi_qos->qosctset0);
writel(0x00002009, &axi_qos->qosctset1);
@@ -182,7 +182,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_AVB_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_AVB_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x0000200A, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -191,7 +191,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_G2D_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_G2D_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x0000200A, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -200,7 +200,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_IMP0_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_IMP0_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x00002002, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -209,7 +209,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_IMP1_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_IMP1_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x00002004, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -218,7 +218,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_IMUX0_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_IMUX0_BASE;
writel(0x00000002, &axi_qos->qosconf);
writel(0x0000200F, &axi_qos->qosctset0);
writel(0x00002009, &axi_qos->qosctset1);
@@ -230,7 +230,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_IMUX1_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_IMUX1_BASE;
writel(0x00000002, &axi_qos->qosconf);
writel(0x0000200F, &axi_qos->qosctset0);
writel(0x00002009, &axi_qos->qosctset1);
@@ -242,7 +242,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_IMUX2_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_IMUX2_BASE;
writel(0x00000002, &axi_qos->qosconf);
writel(0x0000200F, &axi_qos->qosctset0);
writel(0x00002009, &axi_qos->qosctset1);
@@ -254,7 +254,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_LBS_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_LBS_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x00002014, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -263,7 +263,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_MMUDS_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUDS_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002001, &axi_qos->qosctset0);
writel(0x00002009, &axi_qos->qosctset1);
@@ -275,7 +275,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_MMUM_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUM_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002001, &axi_qos->qosctset0);
writel(0x00002009, &axi_qos->qosctset1);
@@ -287,7 +287,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_MMUR_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUR_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002001, &axi_qos->qosctset0);
writel(0x00002009, &axi_qos->qosctset1);
@@ -299,7 +299,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_MMUS0_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUS0_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002001, &axi_qos->qosctset0);
writel(0x00002009, &axi_qos->qosctset1);
@@ -311,7 +311,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_MMUS1_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUS1_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002001, &axi_qos->qosctset0);
writel(0x00002009, &axi_qos->qosctset1);
@@ -323,7 +323,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_MTSB0_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_MTSB0_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x00002002, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -332,7 +332,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_MTSB1_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_MTSB1_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x00002002, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -341,7 +341,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_PCI_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_PCI_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x00002014, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -350,7 +350,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_RTX_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_RTX_BASE;
writel(0x00000002, &axi_qos->qosconf);
writel(0x0000200F, &axi_qos->qosctset0);
writel(0x00002009, &axi_qos->qosctset1);
@@ -362,7 +362,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_SDS0_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_SDS0_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x0000200A, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -371,7 +371,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_SDS1_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_SDS1_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x0000200A, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -380,7 +380,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_USB20_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_USB20_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x00002005, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -389,7 +389,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_USB21_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_USB21_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x00002005, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -398,7 +398,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_USB22_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_USB22_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x00002005, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -407,7 +407,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)SYS_AXI_USB30_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_USB30_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x00002014, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -417,7 +417,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosqon);
/* QoS Register (RT-AXI) */
- axi_qos = (struct r8a7790_axi_qos *)RT_AXI_SHX_BASE;
+ axi_qos = (struct rcar_axi_qos *)RT_AXI_SHX_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x00002005, &axi_qos->qosctset0);
writel(0x00002009, &axi_qos->qosctset1);
@@ -429,7 +429,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)RT_AXI_RDS_BASE;
+ axi_qos = (struct rcar_axi_qos *)RT_AXI_RDS_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x00002007, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -438,7 +438,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)RT_AXI_RTX64TO128_BASE;
+ axi_qos = (struct rcar_axi_qos *)RT_AXI_RTX64TO128_BASE;
writel(0x00000002, &axi_qos->qosconf);
writel(0x0000200F, &axi_qos->qosctset0);
writel(0x00002009, &axi_qos->qosctset1);
@@ -450,7 +450,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)RT_AXI_STPRO_BASE;
+ axi_qos = (struct rcar_axi_qos *)RT_AXI_STPRO_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x00002003, &axi_qos->qosctset0);
writel(0x00002009, &axi_qos->qosctset1);
@@ -463,7 +463,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosqon);
/* QoS Register (MP-AXI) */
- axi_qos = (struct r8a7790_axi_qos *)MP_AXI_ADSP_BASE;
+ axi_qos = (struct rcar_axi_qos *)MP_AXI_ADSP_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x00002007, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -472,34 +472,34 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MP_AXI_ASDS0_BASE;
+ axi_qos = (struct rcar_axi_qos *)MP_AXI_ASDS0_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002014, &axi_qos->qosctset0);
- writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00000040, &axi_qos->qosreqctr);
writel(0x00002006, &axi_qos->qosthres0);
writel(0x00002001, &axi_qos->qosthres1);
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MP_AXI_ASDS1_BASE;
+ axi_qos = (struct rcar_axi_qos *)MP_AXI_ASDS1_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002014, &axi_qos->qosctset0);
- writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00000040, &axi_qos->qosreqctr);
writel(0x00002006, &axi_qos->qosthres0);
writel(0x00002001, &axi_qos->qosthres1);
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MP_AXI_MLP_BASE;
- writel(0x00000000, &axi_qos->qosconf);
- writel(0x00002002, &axi_qos->qosctset0);
- writel(0x00000001, &axi_qos->qosreqctr);
+ axi_qos = (struct rcar_axi_qos *)MP_AXI_MLP_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00001FF0, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
writel(0x00002006, &axi_qos->qosthres0);
writel(0x00002001, &axi_qos->qosthres1);
- writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00002001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MP_AXI_MMUMP_BASE;
+ axi_qos = (struct rcar_axi_qos *)MP_AXI_MMUMP_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002001, &axi_qos->qosctset0);
writel(0x00002009, &axi_qos->qosctset1);
@@ -511,7 +511,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MP_AXI_SPU_BASE;
+ axi_qos = (struct rcar_axi_qos *)MP_AXI_SPU_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x00002018, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -520,7 +520,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MP_AXI_SPUC_BASE;
+ axi_qos = (struct rcar_axi_qos *)MP_AXI_SPUC_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x0000200D, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -530,7 +530,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosqon);
/* QoS Register (SYS-AXI256) */
- axi_qos = (struct r8a7790_axi_qos *)SYS_AXI256_AXI128TO256_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI256_AXI128TO256_BASE;
writel(0x00000002, &axi_qos->qosconf);
writel(0x0000200F, &axi_qos->qosctset0);
writel(0x00002009, &axi_qos->qosctset1);
@@ -542,7 +542,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)SYS_AXI256_SYX_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI256_SYX_BASE;
writel(0x00000002, &axi_qos->qosconf);
writel(0x0000200F, &axi_qos->qosctset0);
writel(0x00002009, &axi_qos->qosctset1);
@@ -554,7 +554,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)SYS_AXI256_MPX_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI256_MPX_BASE;
writel(0x00000002, &axi_qos->qosconf);
writel(0x0000200F, &axi_qos->qosctset0);
writel(0x00002009, &axi_qos->qosctset1);
@@ -566,7 +566,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)SYS_AXI256_MXI_BASE;
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI256_MXI_BASE;
writel(0x00000002, &axi_qos->qosconf);
writel(0x0000200F, &axi_qos->qosctset0);
writel(0x00002009, &axi_qos->qosctset1);
@@ -579,7 +579,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosqon);
/* QoS Register (CCI-AXI) */
- axi_qos = (struct r8a7790_axi_qos *)CCI_AXI_MMUS0_BASE;
+ axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUS0_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002001, &axi_qos->qosctset0);
writel(0x00002009, &axi_qos->qosctset1);
@@ -591,7 +591,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)CCI_AXI_SYX2_BASE;
+ axi_qos = (struct rcar_axi_qos *)CCI_AXI_SYX2_BASE;
writel(0x00000002, &axi_qos->qosconf);
writel(0x0000200F, &axi_qos->qosctset0);
writel(0x00002009, &axi_qos->qosctset1);
@@ -603,7 +603,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)CCI_AXI_MMUR_BASE;
+ axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUR_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002001, &axi_qos->qosctset0);
writel(0x00002009, &axi_qos->qosctset1);
@@ -615,7 +615,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)CCI_AXI_MMUDS_BASE;
+ axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUDS_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002001, &axi_qos->qosctset0);
writel(0x00002009, &axi_qos->qosctset1);
@@ -627,7 +627,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)CCI_AXI_MMUM_BASE;
+ axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUM_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002001, &axi_qos->qosctset0);
writel(0x00002009, &axi_qos->qosctset1);
@@ -639,7 +639,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)CCI_AXI_MXI_BASE;
+ axi_qos = (struct rcar_axi_qos *)CCI_AXI_MXI_BASE;
writel(0x00000002, &axi_qos->qosconf);
writel(0x0000200F, &axi_qos->qosctset0);
writel(0x00002009, &axi_qos->qosctset1);
@@ -651,7 +651,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)CCI_AXI_MMUS1_BASE;
+ axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUS1_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002001, &axi_qos->qosctset0);
writel(0x00002009, &axi_qos->qosctset1);
@@ -663,7 +663,7 @@ void qos_init(void)
writel(0x00000000, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)CCI_AXI_MMUMP_BASE;
+ axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUMP_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002001, &axi_qos->qosctset0);
writel(0x00002009, &axi_qos->qosctset1);
@@ -676,7 +676,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosqon);
/* QoS Register (Media-AXI) */
- axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_JPR_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_JPR_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002018, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -685,7 +685,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_JPW_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_JPW_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002018, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -694,7 +694,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_GCU0R_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_GCU0R_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002018, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -703,7 +703,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_GCU0W_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_GCU0W_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002018, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -712,7 +712,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_GCU1R_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_GCU1R_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002018, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -721,7 +721,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_GCU1W_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_GCU1W_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002018, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -730,7 +730,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_TDMR_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_TDMR_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002018, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -739,7 +739,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_TDMW_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_TDMW_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002018, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -748,7 +748,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSP0CR_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP0CR_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002018, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -757,7 +757,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSP0CW_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP0CW_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002018, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -766,7 +766,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSP1CR_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP1CR_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002018, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -775,7 +775,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSP1CW_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP1CW_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002018, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -784,7 +784,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSPDU0CR_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPDU0CR_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002018, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -793,7 +793,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSPDU0CW_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPDU0CW_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002018, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -802,7 +802,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSPDU1CR_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPDU1CR_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002018, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -811,7 +811,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSPDU1CW_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPDU1CW_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002018, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -820,7 +820,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VIN0W_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VIN0W_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x0000200C, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -829,7 +829,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSP0R_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP0R_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x0000200C, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -838,7 +838,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSP0W_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP0W_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x0000200C, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -847,7 +847,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_FDP0R_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_FDP0R_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x0000200C, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -856,7 +856,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_FDP0W_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_FDP0W_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x0000200C, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -865,7 +865,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_IMSR_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_IMSR_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x0000200C, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -874,7 +874,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_IMSW_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_IMSW_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x0000200C, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -883,7 +883,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSP1R_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP1R_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x0000200C, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -892,7 +892,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSP1W_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP1W_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x0000200C, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -901,7 +901,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_FDP1R_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_FDP1R_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x0000200C, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -910,7 +910,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_FDP1W_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_FDP1W_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x0000200C, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -919,7 +919,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_IMRR_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_IMRR_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x0000200C, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -928,7 +928,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_IMRW_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_IMRW_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x0000200C, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -937,7 +937,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_FDP2R_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_FDP2R_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x0000200C, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -946,7 +946,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_FDP2W_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_FDP2W_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x0000200C, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -955,7 +955,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSPD0R_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPD0R_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x0000200C, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -964,7 +964,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSPD0W_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPD0W_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x0000200C, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -973,7 +973,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSPD1R_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPD1R_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x0000200C, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -982,7 +982,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VSPD1W_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPD1W_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x0000200C, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -991,7 +991,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_DU0R_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_DU0R_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x0000200C, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -1000,7 +1000,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_DU0W_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_DU0W_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x0000200C, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -1009,7 +1009,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_DU1R_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_DU1R_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x0000200C, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -1018,7 +1018,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_DU1W_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_DU1W_BASE;
writel(0x00000000, &axi_qos->qosconf);
writel(0x0000200C, &axi_qos->qosctset0);
writel(0x00000001, &axi_qos->qosreqctr);
@@ -1027,7 +1027,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VCP0CR_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP0CR_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002007, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -1036,7 +1036,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VCP0CW_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP0CW_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002007, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -1045,7 +1045,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VCP0VR_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP0VR_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002007, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -1054,7 +1054,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VCP0VW_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP0VW_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002007, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -1063,7 +1063,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VPC0R_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VPC0R_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002007, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -1072,7 +1072,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VCP1CR_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP1CR_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002007, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -1081,7 +1081,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VCP1CW_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP1CW_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002007, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -1090,7 +1090,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VCP1VR_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP1VR_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002007, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -1099,7 +1099,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VCP1VW_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP1VW_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002007, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
@@ -1108,7 +1108,7 @@ void qos_init(void)
writel(0x00000001, &axi_qos->qosthres2);
writel(0x00000001, &axi_qos->qosqon);
- axi_qos = (struct r8a7790_axi_qos *)MEDIA_AXI_VPC1R_BASE;
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VPC1R_BASE;
writel(0x00000001, &axi_qos->qosconf);
writel(0x00002007, &axi_qos->qosctset0);
writel(0x00000020, &axi_qos->qosreqctr);
diff --git a/board/samsung/arndale/arndale.c b/board/samsung/arndale/arndale.c
index 9efc355..ef88314 100644
--- a/board/samsung/arndale/arndale.c
+++ b/board/samsung/arndale/arndale.c
@@ -16,17 +16,14 @@ DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_USB_EHCI_EXYNOS
int board_usb_init(int index, enum usb_init_type init)
{
- struct exynos5_gpio_part1 *gpio = (struct exynos5_gpio_part1 *)
- samsung_get_base_gpio_part1();
-
/* Configure gpios for usb 3503 hub:
* disconnect, toggle reset and connect
*/
- s5p_gpio_direction_output(&gpio->d1, 7, 0);
- s5p_gpio_direction_output(&gpio->x3, 5, 0);
+ gpio_direction_output(EXYNOS5_GPIO_D17, 0);
+ gpio_direction_output(EXYNOS5_GPIO_X35, 0);
- s5p_gpio_direction_output(&gpio->x3, 5, 1);
- s5p_gpio_direction_output(&gpio->d1, 7, 1);
+ gpio_direction_output(EXYNOS5_GPIO_X35, 1);
+ gpio_direction_output(EXYNOS5_GPIO_D17, 1);
return 0;
}
diff --git a/board/samsung/common/misc.c b/board/samsung/common/misc.c
index 3ff4289..03106fd 100644
--- a/board/samsung/common/misc.c
+++ b/board/samsung/common/misc.c
@@ -116,12 +116,14 @@ static int check_keys(void)
* 4 BOOT_MODE_EXIT
*/
static char *
-mode_name[BOOT_MODE_EXIT + 1] = {
- "DEVICE",
- "THOR",
- "UMS",
- "DFU",
- "EXIT"
+mode_name[BOOT_MODE_EXIT + 1][2] = {
+ {"DEVICE", ""},
+ {"THOR", "thor"},
+ {"UMS", "ums"},
+ {"DFU", "dfu"},
+ {"GPT", "gpt"},
+ {"ENV", "env"},
+ {"EXIT", ""},
};
static char *
@@ -130,18 +132,20 @@ mode_info[BOOT_MODE_EXIT + 1] = {
"downloader",
"mass storage",
"firmware update",
+ "restore",
+ "default",
"and run normal boot"
};
-#define MODE_CMD_ARGC 4
-
static char *
-mode_cmd[BOOT_MODE_EXIT + 1][MODE_CMD_ARGC] = {
- {"", "", "", ""},
- {"thor", "0", "mmc", "0"},
- {"ums", "0", "mmc", "0"},
- {"dfu", "0", "mmc", "0"},
- {"", "", "", ""},
+mode_cmd[BOOT_MODE_EXIT + 1] = {
+ "",
+ "thor 0 mmc 0",
+ "ums 0 mmc 0",
+ "dfu 0 mmc 0",
+ "gpt write mmc 0 $partitions",
+ "env default -a; saveenv",
+ "",
};
static void display_board_info(void)
@@ -182,11 +186,10 @@ static void display_board_info(void)
static int mode_leave_menu(int mode)
{
char *exit_option;
- char *exit_boot = "boot";
+ char *exit_reset = "reset";
char *exit_back = "back";
cmd_tbl_t *cmd;
int cmd_result;
- int cmd_repeatable;
int leave;
lcd_clear();
@@ -200,31 +203,29 @@ static int mode_leave_menu(int mode)
leave = 0;
break;
default:
- cmd = find_cmd(mode_cmd[mode][0]);
+ cmd = find_cmd(mode_name[mode][1]);
if (cmd) {
- printf("Enter: %s %s\n", mode_name[mode],
+ printf("Enter: %s %s\n", mode_name[mode][0],
mode_info[mode]);
- lcd_printf("\n\n\t%s %s\n", mode_name[mode],
+ lcd_printf("\n\n\t%s %s\n", mode_name[mode][0],
mode_info[mode]);
lcd_puts("\n\tDo not turn off device before finish!\n");
- cmd_result = cmd_process(0, MODE_CMD_ARGC,
- *(mode_cmd + mode),
- &cmd_repeatable, NULL);
+ cmd_result = run_command(mode_cmd[mode], 0);
if (cmd_result == CMD_RET_SUCCESS) {
printf("Command finished\n");
lcd_clear();
lcd_printf("\n\n\t%s finished\n",
- mode_name[mode]);
+ mode_name[mode][0]);
- exit_option = exit_boot;
+ exit_option = exit_reset;
leave = 1;
} else {
printf("Command error\n");
lcd_clear();
lcd_printf("\n\n\t%s command error\n",
- mode_name[mode]);
+ mode_name[mode][0]);
exit_option = exit_back;
leave = 0;
@@ -260,11 +261,11 @@ static void display_download_menu(int mode)
selection[mode] = "[=>]";
lcd_clear();
- lcd_printf("\n\t\tDownload Mode Menu\n");
+ lcd_printf("\n\n\t\tDownload Mode Menu\n\n");
for (i = 0; i <= BOOT_MODE_EXIT; i++)
lcd_printf("\t%s %s - %s\n\n", selection[i],
- mode_name[i],
+ mode_name[i][0],
mode_info[i]);
}
@@ -273,10 +274,38 @@ static void download_menu(void)
int mode = 0;
int last_mode = 0;
int run;
- int key;
+ int key = 0;
+ int timeout = 15; /* sec */
+ int i;
display_download_menu(mode);
+ lcd_puts("\n");
+
+ /* Start count if no key is pressed */
+ while (check_keys())
+ continue;
+
+ while (timeout--) {
+ lcd_printf("\r\tNormal boot will start in: %2.d seconds.",
+ timeout);
+
+ /* about 1000 ms in for loop */
+ for (i = 0; i < 10; i++) {
+ mdelay(100);
+ key = check_keys();
+ if (key)
+ break;
+ }
+ if (key)
+ break;
+ }
+
+ if (!key) {
+ lcd_clear();
+ return;
+ }
+
while (1) {
run = 0;
@@ -284,7 +313,7 @@ static void download_menu(void)
display_download_menu(mode);
last_mode = mode;
- mdelay(100);
+ mdelay(200);
key = check_keys();
switch (key) {
@@ -305,7 +334,7 @@ static void download_menu(void)
if (run) {
if (mode_leave_menu(mode))
- break;
+ run_command("reset", 0);
display_download_menu(mode);
}
@@ -314,45 +343,6 @@ static void download_menu(void)
lcd_clear();
}
-static void display_mode_info(void)
-{
- lcd_position_cursor(4, 4);
- lcd_printf("%s\n", U_BOOT_VERSION);
- lcd_puts("\nDownload Mode Menu\n");
-#ifdef CONFIG_SYS_BOARD
- lcd_printf("Board name: %s\n", CONFIG_SYS_BOARD);
-#endif
- lcd_printf("Press POWER KEY to display MENU options.");
-}
-
-static int boot_menu(void)
-{
- int key = 0;
- int timeout = 10;
-
- display_mode_info();
-
- while (timeout--) {
- lcd_printf("\rNormal boot will start in: %d seconds.", timeout);
- mdelay(1000);
-
- key = key_pressed(KEY_POWER);
- if (key)
- break;
- }
-
- lcd_clear();
-
- /* If PWR pressed - show download menu */
- if (key) {
- printf("Power pressed - go to download menu\n");
- download_menu();
- printf("Download mode exit.\n");
- }
-
- return 0;
-}
-
void check_boot_mode(void)
{
int pwr_key;
@@ -365,7 +355,7 @@ void check_boot_mode(void)
power_key_pressed(KEY_PWR_INTERRUPT_REG);
if (key_pressed(KEY_VOLUMEUP))
- boot_menu();
+ download_menu();
else if (key_pressed(KEY_VOLUMEDOWN))
mode_leave_menu(BOOT_MODE_THOR);
}
diff --git a/board/samsung/goni/goni.c b/board/samsung/goni/goni.c
index 61b9ece..4cea63b 100644
--- a/board/samsung/goni/goni.c
+++ b/board/samsung/goni/goni.c
@@ -17,8 +17,6 @@
DECLARE_GLOBAL_DATA_PTR;
-static struct s5pc110_gpio *s5pc110_gpio;
-
u32 get_board_rev(void)
{
return 0;
@@ -27,8 +25,6 @@ u32 get_board_rev(void)
int board_init(void)
{
/* Set Initial global variables */
- s5pc110_gpio = (struct s5pc110_gpio *)S5PC110_GPIO_BASE;
-
gd->bd->bi_arch_number = MACH_TYPE_GONI;
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
@@ -82,7 +78,7 @@ int board_mmc_init(bd_t *bis)
int i, ret, ret_sd = 0;
/* MASSMEMORY_EN: XMSMDATA7: GPJ2[7] output high */
- s5p_gpio_direction_output(&s5pc110_gpio->j2, 7, 1);
+ gpio_direction_output(S5PC110_GPIO_J27, 1);
/*
* MMC0 GPIO
@@ -91,15 +87,15 @@ int board_mmc_init(bd_t *bis)
* GPG0[2] SD_0_CDn -> Not used
* GPG0[3:6] SD_0_DATA[0:3]
*/
- for (i = 0; i < 7; i++) {
- if (i == 2)
+ for (i = S5PC110_GPIO_G00; i < S5PC110_GPIO_G07; i++) {
+ if (i == S5PC110_GPIO_G02)
continue;
/* GPG0[0:6] special function 2 */
- s5p_gpio_cfg_pin(&s5pc110_gpio->g0, i, 0x2);
+ gpio_cfg_pin(i, 0x2);
/* GPG0[0:6] pull disable */
- s5p_gpio_set_pull(&s5pc110_gpio->g0, i, GPIO_PULL_NONE);
+ gpio_set_pull(i, S5P_GPIO_PULL_NONE);
/* GPG0[0:6] drv 4x */
- s5p_gpio_set_drv(&s5pc110_gpio->g0, i, GPIO_DRV_4X);
+ gpio_set_drv(i, S5P_GPIO_DRV_4X);
}
ret = s5p_mmc_init(0, 4);
@@ -110,20 +106,20 @@ int board_mmc_init(bd_t *bis)
* SD card (T_FLASH) detect and init
* T_FLASH_DETECT: EINT28: GPH3[4] input mode
*/
- s5p_gpio_cfg_pin(&s5pc110_gpio->h3, 4, GPIO_INPUT);
- s5p_gpio_set_pull(&s5pc110_gpio->h3, 4, GPIO_PULL_UP);
+ gpio_cfg_pin(S5PC110_GPIO_H34, S5P_GPIO_INPUT);
+ gpio_set_pull(S5PC110_GPIO_H34, S5P_GPIO_PULL_UP);
- if (!s5p_gpio_get_value(&s5pc110_gpio->h3, 4)) {
- for (i = 0; i < 7; i++) {
- if (i == 2)
+ if (!gpio_get_value(S5PC110_GPIO_H34)) {
+ for (i = S5PC110_GPIO_G20; i < S5PC110_GPIO_G27; i++) {
+ if (i == S5PC110_GPIO_G22)
continue;
/* GPG2[0:6] special function 2 */
- s5p_gpio_cfg_pin(&s5pc110_gpio->g2, i, 0x2);
+ gpio_cfg_pin(i, 0x2);
/* GPG2[0:6] pull disable */
- s5p_gpio_set_pull(&s5pc110_gpio->g2, i, GPIO_PULL_NONE);
+ gpio_set_pull(i, S5P_GPIO_PULL_NONE);
/* GPG2[0:6] drv 4x */
- s5p_gpio_set_drv(&s5pc110_gpio->g2, i, GPIO_DRV_4X);
+ gpio_set_drv(i, S5P_GPIO_DRV_4X);
}
ret_sd = s5p_mmc_init(2, 4);
diff --git a/board/samsung/smdk5250/exynos5-dt.c b/board/samsung/smdk5250/exynos5-dt.c
index 379a45c..58821c4 100644
--- a/board/samsung/smdk5250/exynos5-dt.c
+++ b/board/samsung/smdk5250/exynos5-dt.c
@@ -27,12 +27,9 @@ DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_SOUND_MAX98095
static void board_enable_audio_codec(void)
{
- struct exynos5_gpio_part1 *gpio1 = (struct exynos5_gpio_part1 *)
- samsung_get_base_gpio_part1();
-
/* Enable MAX98095 Codec */
- s5p_gpio_direction_output(&gpio1->x1, 7, 1);
- s5p_gpio_set_pull(&gpio1->x1, 7, GPIO_PULL_NONE);
+ gpio_direction_output(EXYNOS5_GPIO_X17, 1);
+ gpio_set_pull(EXYNOS5_GPIO_X17, S5P_GPIO_PULL_NONE);
}
#endif
@@ -47,19 +44,16 @@ int exynos_init(void)
#ifdef CONFIG_LCD
void exynos_cfg_lcd_gpio(void)
{
- struct exynos5_gpio_part1 *gpio1 =
- (struct exynos5_gpio_part1 *)samsung_get_base_gpio_part1();
-
/* For Backlight */
- s5p_gpio_cfg_pin(&gpio1->b2, 0, GPIO_OUTPUT);
- s5p_gpio_set_value(&gpio1->b2, 0, 1);
+ gpio_cfg_pin(EXYNOS5_GPIO_B20, S5P_GPIO_OUTPUT);
+ gpio_set_value(EXYNOS5_GPIO_B20, 1);
/* LCD power on */
- s5p_gpio_cfg_pin(&gpio1->x1, 5, GPIO_OUTPUT);
- s5p_gpio_set_value(&gpio1->x1, 5, 1);
+ gpio_cfg_pin(EXYNOS5_GPIO_X15, S5P_GPIO_OUTPUT);
+ gpio_set_value(EXYNOS5_GPIO_X15, 1);
/* Set Hotplug detect for DP */
- s5p_gpio_cfg_pin(&gpio1->x0, 7, GPIO_FUNC(0x3));
+ gpio_cfg_pin(EXYNOS5_GPIO_X07, S5P_GPIO_FUNC(0x3));
}
void exynos_set_dp_phy(unsigned int onoff)
diff --git a/board/samsung/smdk5250/smdk5250.c b/board/samsung/smdk5250/smdk5250.c
index 28a6d9e..014b7bd 100644
--- a/board/samsung/smdk5250/smdk5250.c
+++ b/board/samsung/smdk5250/smdk5250.c
@@ -29,12 +29,9 @@ DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_SOUND_MAX98095
static void board_enable_audio_codec(void)
{
- struct exynos5_gpio_part1 *gpio1 = (struct exynos5_gpio_part1 *)
- samsung_get_base_gpio_part1();
-
/* Enable MAX98095 Codec */
- s5p_gpio_direction_output(&gpio1->x1, 7, 1);
- s5p_gpio_set_pull(&gpio1->x1, 7, GPIO_PULL_NONE);
+ gpio_direction_output(EXYNOS5_GPIO_X17, 1);
+ gpio_set_pull(EXYNOS5_GPIO_X17, S5P_GPIO_PULL_NONE);
}
#endif
@@ -275,19 +272,17 @@ int exynos_power_init(void)
#ifdef CONFIG_LCD
void exynos_cfg_lcd_gpio(void)
{
- struct exynos5_gpio_part1 *gpio1 =
- (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();
/* For Backlight */
- s5p_gpio_cfg_pin(&gpio1->b2, 0, GPIO_OUTPUT);
- s5p_gpio_set_value(&gpio1->b2, 0, 1);
+ gpio_cfg_pin(EXYNOS5_GPIO_B20, S5P_GPIO_OUTPUT);
+ gpio_set_value(EXYNOS5_GPIO_B20, 1);
/* LCD power on */
- s5p_gpio_cfg_pin(&gpio1->x1, 5, GPIO_OUTPUT);
- s5p_gpio_set_value(&gpio1->x1, 5, 1);
+ gpio_cfg_pin(EXYNOS5_GPIO_X15, S5P_GPIO_OUTPUT);
+ gpio_set_value(EXYNOS5_GPIO_X15, 1);
/* Set Hotplug detect for DP */
- s5p_gpio_cfg_pin(&gpio1->x0, 7, GPIO_FUNC(0x3));
+ gpio_cfg_pin(EXYNOS5_GPIO_X07, S5P_GPIO_FUNC(0x3));
}
void exynos_set_dp_phy(unsigned int onoff)
diff --git a/board/samsung/smdk5420/smdk5420.c b/board/samsung/smdk5420/smdk5420.c
index e4606ec..9207522 100644
--- a/board/samsung/smdk5420/smdk5420.c
+++ b/board/samsung/smdk5420/smdk5420.c
@@ -21,11 +21,8 @@ DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_USB_EHCI_EXYNOS
static int board_usb_vbus_init(void)
{
- struct exynos5_gpio_part1 *gpio1 = (struct exynos5_gpio_part1 *)
- samsung_get_base_gpio_part1();
-
/* Enable VBUS power switch */
- s5p_gpio_direction_output(&gpio1->x2, 6, 1);
+ gpio_direction_output(EXYNOS5420_GPIO_X26, 1);
/* VBUS turn ON time */
mdelay(3);
@@ -49,15 +46,15 @@ void cfg_lcd_gpio(void)
(struct exynos5_gpio_part1 *)samsung_get_base_gpio_part1();
/* For Backlight */
- s5p_gpio_cfg_pin(&gpio1->b2, 0, GPIO_OUTPUT);
- s5p_gpio_set_value(&gpio1->b2, 0, 1);
+ gpio_cfg_pin(EXYNOS5420_GPIO_B20, S5P_GPIO_OUTPUT);
+ gpio_set_value(EXYNOS5420_GPIO_B20, 1);
/* LCD power on */
- s5p_gpio_cfg_pin(&gpio1->x1, 5, GPIO_OUTPUT);
- s5p_gpio_set_value(&gpio1->x1, 5, 1);
+ gpio_cfg_pin(EXYNOS5420_GPIO_X15, S5P_GPIO_OUTPUT);
+ gpio_set_value(EXYNOS5420_GPIO_X15, 1);
/* Set Hotplug detect for DP */
- s5p_gpio_cfg_pin(&gpio1->x0, 7, GPIO_FUNC(0x3));
+ gpio_cfg_pin(EXYNOS5420_GPIO_X07, S5P_GPIO_FUNC(0x3));
}
vidinfo_t panel_info = {
diff --git a/board/samsung/smdkc100/smdkc100.c b/board/samsung/smdkc100/smdkc100.c
index 860c851..e009564 100644
--- a/board/samsung/smdkc100/smdkc100.c
+++ b/board/samsung/smdkc100/smdkc100.c
@@ -21,11 +21,8 @@ static void smc9115_pre_init(void)
{
u32 smc_bw_conf, smc_bc_conf;
- struct s5pc100_gpio *const gpio =
- (struct s5pc100_gpio *)samsung_get_base_gpio();
-
/* gpio configuration GPK0CON */
- s5p_gpio_cfg_pin(&gpio->k0, CONFIG_ENV_SROM_BANK, GPIO_FUNC(2));
+ gpio_cfg_pin(S5PC100_GPIO_K00 + CONFIG_ENV_SROM_BANK, S5P_GPIO_FUNC(2));
/* Ethernet needs bus width of 16 bits */
smc_bw_conf = SMC_DATA16_WIDTH(CONFIG_ENV_SROM_BANK);
diff --git a/board/samsung/smdkv310/smdkv310.c b/board/samsung/smdkv310/smdkv310.c
index 81a3060..8eca358 100644
--- a/board/samsung/smdkv310/smdkv310.c
+++ b/board/samsung/smdkv310/smdkv310.c
@@ -15,15 +15,13 @@
#include <asm/arch/sromc.h>
DECLARE_GLOBAL_DATA_PTR;
-struct exynos4_gpio_part1 *gpio1;
-struct exynos4_gpio_part2 *gpio2;
static void smc9115_pre_init(void)
{
u32 smc_bw_conf, smc_bc_conf;
/* gpio configuration GPK0CON */
- s5p_gpio_cfg_pin(&gpio2->y0, CONFIG_ENV_SROM_BANK, GPIO_FUNC(2));
+ gpio_cfg_pin(EXYNOS4_GPIO_Y00 + CONFIG_ENV_SROM_BANK, S5P_GPIO_FUNC(2));
/* Ethernet needs bus width of 16 bits */
smc_bw_conf = SROMC_DATA16_WIDTH(CONFIG_ENV_SROM_BANK);
@@ -38,9 +36,6 @@ static void smc9115_pre_init(void)
int board_init(void)
{
- gpio1 = (struct exynos4_gpio_part1 *) EXYNOS4_GPIO_PART1_BASE;
- gpio2 = (struct exynos4_gpio_part2 *) EXYNOS4_GPIO_PART2_BASE;
-
smc9115_pre_init();
gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL);
@@ -103,21 +98,21 @@ int board_mmc_init(bd_t *bis)
* GPK2[2] SD_2_CDn
* GPK2[3:6] SD_2_DATA[0:3](2)
*/
- for (i = 0; i < 7; i++) {
+ for (i = EXYNOS4_GPIO_K20; i < EXYNOS4_GPIO_K27; i++) {
/* GPK2[0:6] special function 2 */
- s5p_gpio_cfg_pin(&gpio2->k2, i, GPIO_FUNC(0x2));
+ gpio_cfg_pin(i, S5P_GPIO_FUNC(0x2));
/* GPK2[0:6] drv 4x */
- s5p_gpio_set_drv(&gpio2->k2, i, GPIO_DRV_4X);
+ gpio_set_drv(i, S5P_GPIO_DRV_4X);
/* GPK2[0:1] pull disable */
- if (i == 0 || i == 1) {
- s5p_gpio_set_pull(&gpio2->k2, i, GPIO_PULL_NONE);
+ if (i == EXYNOS4_GPIO_K20 || i == EXYNOS4_GPIO_K21) {
+ gpio_set_pull(i, S5P_GPIO_PULL_NONE);
continue;
}
/* GPK2[2:6] pull up */
- s5p_gpio_set_pull(&gpio2->k2, i, GPIO_PULL_UP);
+ gpio_set_pull(i, S5P_GPIO_PULL_UP);
}
err = s5p_mmc_init(2, 4);
return err;
diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c
index ab0ad1d..fec72d4 100644
--- a/board/samsung/trats/trats.c
+++ b/board/samsung/trats/trats.c
@@ -54,8 +54,6 @@ int exynos_init(void)
void i2c_init_board(void)
{
int err;
- struct exynos4_gpio_part2 *gpio2 =
- (struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2();
/* I2C_5 -> PMIC */
err = exynos_pinmux_config(PERIPH_ID_I2C5, PINMUX_FLAG_NONE);
@@ -65,8 +63,8 @@ void i2c_init_board(void)
}
/* I2C_8 -> FG */
- s5p_gpio_direction_output(&gpio2->y4, 0, 1);
- s5p_gpio_direction_output(&gpio2->y4, 1, 1);
+ gpio_direction_output(EXYNOS4_GPIO_Y40, 1);
+ gpio_direction_output(EXYNOS4_GPIO_Y41, 1);
}
static void trats_low_power_mode(void)
@@ -347,21 +345,19 @@ int exynos_power_init(void)
static unsigned int get_hw_revision(void)
{
- struct exynos4_gpio_part1 *gpio =
- (struct exynos4_gpio_part1 *)samsung_get_base_gpio_part1();
int hwrev = 0;
int i;
/* hw_rev[3:0] == GPE1[3:0] */
- for (i = 0; i < 4; i++) {
- s5p_gpio_cfg_pin(&gpio->e1, i, GPIO_INPUT);
- s5p_gpio_set_pull(&gpio->e1, i, GPIO_PULL_NONE);
+ for (i = EXYNOS4_GPIO_E10; i < EXYNOS4_GPIO_E14; i++) {
+ gpio_cfg_pin(i, S5P_GPIO_INPUT);
+ gpio_set_pull(i, S5P_GPIO_PULL_NONE);
}
udelay(1);
for (i = 0; i < 4; i++)
- hwrev |= (s5p_gpio_get_value(&gpio->e1, i) << i);
+ hwrev |= (gpio_get_value(EXYNOS4_GPIO_E10 + i) << i);
debug("hwrev 0x%x\n", hwrev);
@@ -442,11 +438,8 @@ int g_dnl_board_usb_cable_connected(void)
static void pmic_reset(void)
{
- struct exynos4_gpio_part2 *gpio =
- (struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2();
-
- s5p_gpio_direction_output(&gpio->x0, 7, 1);
- s5p_gpio_set_pull(&gpio->x2, 7, GPIO_PULL_NONE);
+ gpio_direction_output(EXYNOS4_GPIO_X07, 1);
+ gpio_set_pull(EXYNOS4_GPIO_X27, S5P_GPIO_PULL_NONE);
}
static void board_clock_init(void)
@@ -523,12 +516,9 @@ static void board_power_init(void)
static void exynos_uart_init(void)
{
- struct exynos4_gpio_part2 *gpio2 =
- (struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2();
-
/* UART_SEL GPY4[7] (part2) at EXYNOS4 */
- s5p_gpio_set_pull(&gpio2->y4, 7, GPIO_PULL_UP);
- s5p_gpio_direction_output(&gpio2->y4, 7, 1);
+ gpio_set_pull(EXYNOS4_GPIO_Y47, S5P_GPIO_PULL_UP);
+ gpio_direction_output(EXYNOS4_GPIO_Y47, 1);
}
int exynos_early_init_f(void)
@@ -544,14 +534,11 @@ int exynos_early_init_f(void)
void exynos_reset_lcd(void)
{
- struct exynos4_gpio_part2 *gpio2 =
- (struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2();
-
- s5p_gpio_direction_output(&gpio2->y4, 5, 1);
+ gpio_direction_output(EXYNOS4_GPIO_Y45, 1);
udelay(10000);
- s5p_gpio_direction_output(&gpio2->y4, 5, 0);
+ gpio_direction_output(EXYNOS4_GPIO_Y45, 0);
udelay(10000);
- s5p_gpio_direction_output(&gpio2->y4, 5, 1);
+ gpio_direction_output(EXYNOS4_GPIO_Y45, 1);
}
int lcd_power(void)
diff --git a/board/samsung/trats2/trats2.c b/board/samsung/trats2/trats2.c
index 4709525..e4987ce 100644
--- a/board/samsung/trats2/trats2.c
+++ b/board/samsung/trats2/trats2.c
@@ -25,9 +25,6 @@
DECLARE_GLOBAL_DATA_PTR;
-static struct exynos4x12_gpio_part1 *gpio1;
-static struct exynos4x12_gpio_part2 *gpio2;
-
static unsigned int board_rev = -1;
static inline u32 get_model_rev(void);
@@ -37,26 +34,24 @@ static void check_hw_revision(void)
int modelrev = 0;
int i;
- gpio2 = (struct exynos4x12_gpio_part2 *)samsung_get_base_gpio_part2();
-
/*
* GPM1[1:0]: MODEL_REV[1:0]
* Don't set as pull-none for these N/C pin.
* TRM say that it may cause unexcepted state and leakage current.
* and pull-none is only for output function.
*/
- for (i = 0; i < 2; i++)
- s5p_gpio_cfg_pin(&gpio2->m1, i, GPIO_INPUT);
+ for (i = EXYNOS4X12_GPIO_M10; i < EXYNOS4X12_GPIO_M12; i++)
+ gpio_cfg_pin(i, S5P_GPIO_INPUT);
/* GPM1[5:2]: HW_REV[3:0] */
- for (i = 2; i < 6; i++) {
- s5p_gpio_cfg_pin(&gpio2->m1, i, GPIO_INPUT);
- s5p_gpio_set_pull(&gpio2->m1, i, GPIO_PULL_NONE);
+ for (i = EXYNOS4X12_GPIO_M12; i < EXYNOS4X12_GPIO_M16; i++) {
+ gpio_cfg_pin(i, S5P_GPIO_INPUT);
+ gpio_set_pull(i, S5P_GPIO_PULL_NONE);
}
/* GPM1[1:0]: MODEL_REV[1:0] */
for (i = 0; i < 2; i++)
- modelrev |= (s5p_gpio_get_value(&gpio2->m1, i) << i);
+ modelrev |= (gpio_get_value(EXYNOS4X12_GPIO_M10 + i) << i);
/* board_rev[15:8] = model */
board_rev = modelrev << 8;
@@ -74,26 +69,24 @@ static inline u32 get_model_rev(void)
static void board_external_gpio_init(void)
{
- gpio2 = (struct exynos4x12_gpio_part2 *)samsung_get_base_gpio_part2();
-
/*
* some pins which in alive block are connected with external pull-up
* but it's default setting is pull-down.
* if that pin set as input then that floated
*/
- s5p_gpio_set_pull(&gpio2->x0, 2, GPIO_PULL_NONE); /* PS_ALS_INT */
- s5p_gpio_set_pull(&gpio2->x0, 4, GPIO_PULL_NONE); /* TSP_nINT */
- s5p_gpio_set_pull(&gpio2->x0, 7, GPIO_PULL_NONE); /* AP_PMIC_IRQ*/
- s5p_gpio_set_pull(&gpio2->x1, 5, GPIO_PULL_NONE); /* IF_PMIC_IRQ*/
- s5p_gpio_set_pull(&gpio2->x2, 0, GPIO_PULL_NONE); /* VOL_UP */
- s5p_gpio_set_pull(&gpio2->x2, 1, GPIO_PULL_NONE); /* VOL_DOWN */
- s5p_gpio_set_pull(&gpio2->x2, 3, GPIO_PULL_NONE); /* FUEL_ALERT */
- s5p_gpio_set_pull(&gpio2->x2, 4, GPIO_PULL_NONE); /* ADC_INT */
- s5p_gpio_set_pull(&gpio2->x2, 7, GPIO_PULL_NONE); /* nPOWER */
- s5p_gpio_set_pull(&gpio2->x3, 0, GPIO_PULL_NONE); /* WPC_INT */
- s5p_gpio_set_pull(&gpio2->x3, 5, GPIO_PULL_NONE); /* OK_KEY */
- s5p_gpio_set_pull(&gpio2->x3, 7, GPIO_PULL_NONE); /* HDMI_HPD */
+ gpio_set_pull(EXYNOS4X12_GPIO_X02, S5P_GPIO_PULL_NONE); /* PS_ALS_INT */
+ gpio_set_pull(EXYNOS4X12_GPIO_X04, S5P_GPIO_PULL_NONE); /* TSP_nINT */
+ gpio_set_pull(EXYNOS4X12_GPIO_X07, S5P_GPIO_PULL_NONE); /* AP_PMIC_IRQ*/
+ gpio_set_pull(EXYNOS4X12_GPIO_X15, S5P_GPIO_PULL_NONE); /* IF_PMIC_IRQ*/
+ gpio_set_pull(EXYNOS4X12_GPIO_X20, S5P_GPIO_PULL_NONE); /* VOL_UP */
+ gpio_set_pull(EXYNOS4X12_GPIO_X21, S5P_GPIO_PULL_NONE); /* VOL_DOWN */
+ gpio_set_pull(EXYNOS4X12_GPIO_X23, S5P_GPIO_PULL_NONE); /* FUEL_ALERT */
+ gpio_set_pull(EXYNOS4X12_GPIO_X24, S5P_GPIO_PULL_NONE); /* ADC_INT */
+ gpio_set_pull(EXYNOS4X12_GPIO_X27, S5P_GPIO_PULL_NONE); /* nPOWER */
+ gpio_set_pull(EXYNOS4X12_GPIO_X30, S5P_GPIO_PULL_NONE); /* WPC_INT */
+ gpio_set_pull(EXYNOS4X12_GPIO_X35, S5P_GPIO_PULL_NONE); /* OK_KEY */
+ gpio_set_pull(EXYNOS4X12_GPIO_X37, S5P_GPIO_PULL_NONE); /* HDMI_HPD */
}
#ifdef CONFIG_SYS_I2C_INIT_BOARD
@@ -101,9 +94,6 @@ static void board_init_i2c(void)
{
int err;
- gpio1 = (struct exynos4x12_gpio_part1 *)samsung_get_base_gpio_part1();
- gpio2 = (struct exynos4x12_gpio_part2 *)samsung_get_base_gpio_part2();
-
/* I2C_7 */
err = exynos_pinmux_config(PERIPH_ID_I2C7, PINMUX_FLAG_NONE);
if (err) {
@@ -112,12 +102,12 @@ static void board_init_i2c(void)
}
/* I2C_8 */
- s5p_gpio_direction_output(&gpio1->f1, 4, 1);
- s5p_gpio_direction_output(&gpio1->f1, 5, 1);
+ gpio_direction_output(EXYNOS4X12_GPIO_F14, 1);
+ gpio_direction_output(EXYNOS4X12_GPIO_F15, 1);
/* I2C_9 */
- s5p_gpio_direction_output(&gpio2->m2, 1, 1);
- s5p_gpio_direction_output(&gpio2->m2, 0, 1);
+ gpio_direction_output(EXYNOS4X12_GPIO_M21, 1);
+ gpio_direction_output(EXYNOS4X12_GPIO_M20, 1);
}
#endif
@@ -125,17 +115,17 @@ static void board_init_i2c(void)
int get_soft_i2c_scl_pin(void)
{
if (I2C_ADAP_HWNR)
- return exynos4x12_gpio_get(2, m2, 1); /* I2C9 */
+ return EXYNOS4X12_GPIO_M21; /* I2C9 */
else
- return exynos4x12_gpio_get(1, f1, 4); /* I2C8 */
+ return EXYNOS4X12_GPIO_F14; /* I2C8 */
}
int get_soft_i2c_sda_pin(void)
{
if (I2C_ADAP_HWNR)
- return exynos4x12_gpio_get(2, m2, 0); /* I2C9 */
+ return EXYNOS4X12_GPIO_M20; /* I2C9 */
else
- return exynos4x12_gpio_get(1, f1, 5); /* I2C8 */
+ return EXYNOS4X12_GPIO_F15; /* I2C8 */
}
#endif
@@ -396,11 +386,9 @@ void exynos_lcd_power_on(void)
{
struct pmic *p = pmic_get("MAX77686_PMIC");
- gpio1 = (struct exynos4x12_gpio_part1 *)samsung_get_base_gpio_part1();
-
/* LCD_2.2V_EN: GPC0[1] */
- s5p_gpio_set_pull(&gpio1->c0, 1, GPIO_PULL_UP);
- s5p_gpio_direction_output(&gpio1->c0, 1, 1);
+ gpio_set_pull(EXYNOS4X12_GPIO_C01, S5P_GPIO_PULL_UP);
+ gpio_direction_output(EXYNOS4X12_GPIO_C01, 1);
/* LDO25 VCC_3.1V_LCD */
pmic_probe(p);
@@ -410,12 +398,10 @@ void exynos_lcd_power_on(void)
void exynos_reset_lcd(void)
{
- gpio1 = (struct exynos4x12_gpio_part1 *)samsung_get_base_gpio_part1();
-
/* reset lcd */
- s5p_gpio_direction_output(&gpio1->f2, 1, 0);
+ gpio_direction_output(EXYNOS4X12_GPIO_F21, 0);
udelay(10);
- s5p_gpio_set_value(&gpio1->f2, 1, 1);
+ gpio_set_value(EXYNOS4X12_GPIO_F21, 1);
}
void exynos_lcd_misc_init(vidinfo_t *vid)
diff --git a/board/samsung/universal_c210/universal.c b/board/samsung/universal_c210/universal.c
index 8e49195..47e7f53 100644
--- a/board/samsung/universal_c210/universal.c
+++ b/board/samsung/universal_c210/universal.c
@@ -27,8 +27,6 @@
DECLARE_GLOBAL_DATA_PTR;
-struct exynos4_gpio_part1 *gpio1;
-struct exynos4_gpio_part2 *gpio2;
unsigned int board_rev;
u32 get_board_rev(void)
@@ -305,35 +303,35 @@ void exynos_cfg_lcd_gpio(void)
for (i = 0; i < 8; i++) {
/* set GPF0,1,2[0:7] for RGB Interface and Data lines (32bit) */
- s5p_gpio_cfg_pin(&gpio1->f0, i, GPIO_FUNC(2));
- s5p_gpio_cfg_pin(&gpio1->f1, i, GPIO_FUNC(2));
- s5p_gpio_cfg_pin(&gpio1->f2, i, GPIO_FUNC(2));
+ gpio_cfg_pin(EXYNOS4_GPIO_F00 + i, S5P_GPIO_FUNC(2));
+ gpio_cfg_pin(EXYNOS4_GPIO_F10 + i, S5P_GPIO_FUNC(2));
+ gpio_cfg_pin(EXYNOS4_GPIO_F20 + i, S5P_GPIO_FUNC(2));
/* pull-up/down disable */
- s5p_gpio_set_pull(&gpio1->f0, i, GPIO_PULL_NONE);
- s5p_gpio_set_pull(&gpio1->f1, i, GPIO_PULL_NONE);
- s5p_gpio_set_pull(&gpio1->f2, i, GPIO_PULL_NONE);
+ gpio_set_pull(EXYNOS4_GPIO_F00 + i, S5P_GPIO_PULL_NONE);
+ gpio_set_pull(EXYNOS4_GPIO_F10 + i, S5P_GPIO_PULL_NONE);
+ gpio_set_pull(EXYNOS4_GPIO_F20 + i, S5P_GPIO_PULL_NONE);
/* drive strength to max (24bit) */
- s5p_gpio_set_drv(&gpio1->f0, i, GPIO_DRV_4X);
- s5p_gpio_set_rate(&gpio1->f0, i, GPIO_DRV_SLOW);
- s5p_gpio_set_drv(&gpio1->f1, i, GPIO_DRV_4X);
- s5p_gpio_set_rate(&gpio1->f1, i, GPIO_DRV_SLOW);
- s5p_gpio_set_drv(&gpio1->f2, i, GPIO_DRV_4X);
- s5p_gpio_set_rate(&gpio1->f0, i, GPIO_DRV_SLOW);
+ gpio_set_drv(EXYNOS4_GPIO_F00 + i, S5P_GPIO_DRV_4X);
+ gpio_set_rate(EXYNOS4_GPIO_F00 + i, S5P_GPIO_DRV_SLOW);
+ gpio_set_drv(EXYNOS4_GPIO_F10 + i, S5P_GPIO_DRV_4X);
+ gpio_set_rate(EXYNOS4_GPIO_F10 + i, S5P_GPIO_DRV_SLOW);
+ gpio_set_drv(EXYNOS4_GPIO_F20 + i, S5P_GPIO_DRV_4X);
+ gpio_set_rate(EXYNOS4_GPIO_F00 + i, S5P_GPIO_DRV_SLOW);
}
- for (i = 0; i < f3_end; i++) {
+ for (i = EXYNOS4_GPIO_F30; i < (EXYNOS4_GPIO_F30 + f3_end); i++) {
/* set GPF3[0:3] for RGB Interface and Data lines (32bit) */
- s5p_gpio_cfg_pin(&gpio1->f3, i, GPIO_FUNC(2));
+ gpio_cfg_pin(i, S5P_GPIO_FUNC(2));
/* pull-up/down disable */
- s5p_gpio_set_pull(&gpio1->f3, i, GPIO_PULL_NONE);
+ gpio_set_pull(i, S5P_GPIO_PULL_NONE);
/* drive strength to max (24bit) */
- s5p_gpio_set_drv(&gpio1->f3, i, GPIO_DRV_4X);
- s5p_gpio_set_rate(&gpio1->f3, i, GPIO_DRV_SLOW);
+ gpio_set_drv(i, S5P_GPIO_DRV_4X);
+ gpio_set_rate(i, S5P_GPIO_DRV_SLOW);
}
/* gpio pad configuration for LCD reset. */
- s5p_gpio_cfg_pin(&gpio2->y4, 5, GPIO_OUTPUT);
+ gpio_cfg_pin(EXYNOS4_GPIO_Y45, S5P_GPIO_OUTPUT);
spi_init();
}
@@ -345,11 +343,11 @@ int mipi_power(void)
void exynos_reset_lcd(void)
{
- s5p_gpio_set_value(&gpio2->y4, 5, 1);
+ gpio_set_value(EXYNOS4_GPIO_Y45, 1);
udelay(10000);
- s5p_gpio_set_value(&gpio2->y4, 5, 0);
+ gpio_set_value(EXYNOS4_GPIO_Y45, 0);
udelay(10000);
- s5p_gpio_set_value(&gpio2->y4, 5, 1);
+ gpio_set_value(EXYNOS4_GPIO_Y45, 1);
udelay(100);
}
@@ -379,9 +377,6 @@ void exynos_enable_ldo(unsigned int onoff)
int exynos_init(void)
{
- gpio1 = (struct exynos4_gpio_part1 *) EXYNOS4_GPIO_PART1_BASE;
- gpio2 = (struct exynos4_gpio_part2 *) EXYNOS4_GPIO_PART2_BASE;
-
gd->bd->bi_arch_number = MACH_TYPE_UNIVERSAL_C210;
switch (get_hwrev()) {
@@ -392,7 +387,7 @@ int exynos_init(void)
* you should set it HIGH since it removes the inverter
*/
/* MASSMEMORY_EN: XMDMDATA_6: GPE3[6] */
- s5p_gpio_direction_output(&gpio1->e3, 6, 0);
+ gpio_direction_output(EXYNOS4_GPIO_E36, 0);
break;
default:
/*
@@ -400,7 +395,7 @@ int exynos_init(void)
* But set it as HIGH to ensure
*/
/* MASSMEMORY_EN: XMDMADDR_3: GPE1[3] */
- s5p_gpio_direction_output(&gpio1->e1, 3, 1);
+ gpio_direction_output(EXYNOS4_GPIO_E13, 1);
break;
}
diff --git a/board/siemens/common/board.c b/board/siemens/common/board.c
index 7e8731b..2782bcc 100644
--- a/board/siemens/common/board.c
+++ b/board/siemens/common/board.c
@@ -128,12 +128,6 @@ do_userbutton(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
button = 0;
gpio_free(gpio);
- if (!button) {
- /* LED0 - RED=1: GPIO2_0 2*32 = 64 */
- gpio_request(BOARD_DFU_BUTTON_LED, "");
- gpio_direction_output(BOARD_DFU_BUTTON_LED, 1);
- gpio_set_value(BOARD_DFU_BUTTON_LED, 1);
- }
return button;
}
@@ -144,6 +138,46 @@ U_BOOT_CMD(
""
);
#endif
+/*
+ * This command sets led
+ * Input - name of led
+ * value of led
+ * Returns - 1 if input does not match
+ * 0 if led was set
+ */
+static int
+do_setled(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ int gpio = 0;
+ if (argc != 3)
+ goto exit;
+#if defined(BOARD_STATUS_LED)
+ if (!strcmp(argv[1], "stat"))
+ gpio = BOARD_STATUS_LED;
+#endif
+#if defined(BOARD_DFU_BUTTON_LED)
+ if (!strcmp(argv[1], "dfu"))
+ gpio = BOARD_DFU_BUTTON_LED;
+#endif
+ /* If argument does not mach exit */
+ if (gpio == 0)
+ goto exit;
+ gpio_request(gpio, "");
+ gpio_direction_output(gpio, 1);
+ if (!strcmp(argv[2], "1"))
+ gpio_set_value(gpio, 1);
+ else
+ gpio_set_value(gpio, 0);
+ return 0;
+exit:
+ return 1;
+}
+
+U_BOOT_CMD(
+ led, CONFIG_SYS_MAXARGS, 2, do_setled,
+ "Set led on or off",
+ "dfu val - set dfu led\nled stat val - set status led"
+);
static int
do_usertestwdt(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
diff --git a/board/siemens/dxr2/Makefile b/board/siemens/draco/Makefile
index f159932..f159932 100644
--- a/board/siemens/dxr2/Makefile
+++ b/board/siemens/draco/Makefile
diff --git a/board/siemens/dxr2/board.c b/board/siemens/draco/board.c
index 38ac93d..9be2e34 100644
--- a/board/siemens/dxr2/board.c
+++ b/board/siemens/draco/board.c
@@ -1,5 +1,5 @@
/*
- * Board functions for TI AM335X based dxr2 board
+ * Board functions for TI AM335X based draco board
* (C) Copyright 2013 Siemens Schweiz AG
* (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
*
@@ -37,13 +37,27 @@
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_SPL_BUILD
-static struct dxr2_baseboard_id __attribute__((section(".data"))) settings;
-/* @303MHz-i0 */
+static struct draco_baseboard_id __attribute__((section(".data"))) settings;
+
+#if DDR_PLL_FREQ == 303
+/* Default@303MHz-i0 */
+const struct ddr3_data ddr3_default = {
+ 0x33524444, 0x56312e35, 0x0080, 0x0000, 0x003A, 0x003F, 0x009F,
+ 0x0079, 0x0888A39B, 0x26247FDA, 0x501F821F, 0x00100206, 0x61A44A32,
+ 0x0000093B, 0x0000014A,
+ "default name @303MHz \0",
+ "default marking \0",
+};
+#elif DDR_PLL_FREQ == 400
+/* Default@400MHz-i0 */
const struct ddr3_data ddr3_default = {
- 0x33524444, 0x56312e34, 0x0080, 0x0000, 0x0038, 0x003E, 0x00A4,
- 0x0075, 0x0888A39B, 0x26247FDA, 0x501F821F, 0x00100206, 0x61A44A32,
+ 0x33524444, 0x56312e35, 0x0080, 0x0000, 0x0039, 0x0046, 0x00ab,
+ 0x0080, 0x0AAAA4DB, 0x26307FDA, 0x501F821F, 0x00100207, 0x61A45232,
0x00000618, 0x0000014A,
+ "default name @400MHz \0",
+ "default marking \0",
};
+#endif
static void set_default_ddr3_timings(void)
{
@@ -53,8 +67,12 @@ static void set_default_ddr3_timings(void)
static void print_ddr3_timings(void)
{
- printf("\n\nDDR3 Timing parameters:\n");
- printf("Diff Eeprom Default\n");
+ printf("\nDDR3\n");
+ printf("clock:\t\t%d MHz\n", DDR_PLL_FREQ);
+ printf("device:\t\t%s\n", settings.ddr3.manu_name);
+ printf("marking:\t%s\n", settings.ddr3.manu_marking);
+ printf("timing parameters\n");
+ printf("diff\teeprom\tdefault\n");
PRINTARGS(magic);
PRINTARGS(version);
PRINTARGS(ddr3_sratio);
@@ -78,9 +96,9 @@ static void print_ddr3_timings(void)
static void print_chip_data(void)
{
- printf("\n");
- printf("Device: '%s'\n", settings.chip.sdevname);
- printf("HW version: '%s'\n", settings.chip.shwver);
+ printf("\nCPU BOARD\n");
+ printf("device: \t'%s'\n", settings.chip.sdevname);
+ printf("hw version: \t'%s'\n", settings.chip.shwver);
}
#endif /* CONFIG_SPL_BUILD */
@@ -112,20 +130,18 @@ static int read_eeprom(void)
printf("Using DDR3 settings from EEPROM\n");
} else {
if (ddr3_default.magic != settings.ddr3.magic)
- printf("Error: No valid DDR3 data in eeprom.\n");
+ printf("Warning: No valid DDR3 data in eeprom.\n");
if (ddr3_default.version != settings.ddr3.version)
- printf("Error: DDR3 data version does not match.\n");
+ printf("Warning: DDR3 data version does not match.\n");
printf("Using default settings\n");
set_default_ddr3_timings();
}
- if (MAGIC_CHIP == settings.chip.magic) {
- printf("Valid chip data in eeprom\n");
+ if (MAGIC_CHIP == settings.chip.magic)
print_chip_data();
- } else {
- printf("Error: No chip data in eeprom\n");
- }
+ else
+ printf("Warning: No chip data in eeprom\n");
print_ddr3_timings();
#endif
@@ -135,48 +151,48 @@ static int read_eeprom(void)
#ifdef CONFIG_SPL_BUILD
static void board_init_ddr(void)
{
-struct emif_regs dxr2_ddr3_emif_reg_data = {
+struct emif_regs draco_ddr3_emif_reg_data = {
.zq_config = 0x50074BE4,
};
-struct ddr_data dxr2_ddr3_data = {
+struct ddr_data draco_ddr3_data = {
};
-struct cmd_control dxr2_ddr3_cmd_ctrl_data = {
+struct cmd_control draco_ddr3_cmd_ctrl_data = {
};
-struct ctrl_ioregs dxr2_ddr3_ioregs = {
+struct ctrl_ioregs draco_ddr3_ioregs = {
};
/* pass values from eeprom */
- dxr2_ddr3_emif_reg_data.sdram_tim1 = settings.ddr3.sdram_tim1;
- dxr2_ddr3_emif_reg_data.sdram_tim2 = settings.ddr3.sdram_tim2;
- dxr2_ddr3_emif_reg_data.sdram_tim3 = settings.ddr3.sdram_tim3;
- dxr2_ddr3_emif_reg_data.emif_ddr_phy_ctlr_1 =
+ draco_ddr3_emif_reg_data.sdram_tim1 = settings.ddr3.sdram_tim1;
+ draco_ddr3_emif_reg_data.sdram_tim2 = settings.ddr3.sdram_tim2;
+ draco_ddr3_emif_reg_data.sdram_tim3 = settings.ddr3.sdram_tim3;
+ draco_ddr3_emif_reg_data.emif_ddr_phy_ctlr_1 =
settings.ddr3.emif_ddr_phy_ctlr_1;
- dxr2_ddr3_emif_reg_data.sdram_config = settings.ddr3.sdram_config;
- dxr2_ddr3_emif_reg_data.ref_ctrl = settings.ddr3.ref_ctrl;
-
- dxr2_ddr3_data.datardsratio0 = settings.ddr3.dt0rdsratio0;
- dxr2_ddr3_data.datawdsratio0 = settings.ddr3.dt0wdsratio0;
- dxr2_ddr3_data.datafwsratio0 = settings.ddr3.dt0fwsratio0;
- dxr2_ddr3_data.datawrsratio0 = settings.ddr3.dt0wrsratio0;
-
- dxr2_ddr3_cmd_ctrl_data.cmd0csratio = settings.ddr3.ddr3_sratio;
- dxr2_ddr3_cmd_ctrl_data.cmd0iclkout = settings.ddr3.iclkout;
- dxr2_ddr3_cmd_ctrl_data.cmd1csratio = settings.ddr3.ddr3_sratio;
- dxr2_ddr3_cmd_ctrl_data.cmd1iclkout = settings.ddr3.iclkout;
- dxr2_ddr3_cmd_ctrl_data.cmd2csratio = settings.ddr3.ddr3_sratio;
- dxr2_ddr3_cmd_ctrl_data.cmd2iclkout = settings.ddr3.iclkout;
-
- dxr2_ddr3_ioregs.cm0ioctl = settings.ddr3.ioctr_val,
- dxr2_ddr3_ioregs.cm1ioctl = settings.ddr3.ioctr_val,
- dxr2_ddr3_ioregs.cm2ioctl = settings.ddr3.ioctr_val,
- dxr2_ddr3_ioregs.dt0ioctl = settings.ddr3.ioctr_val,
- dxr2_ddr3_ioregs.dt1ioctl = settings.ddr3.ioctr_val,
-
- config_ddr(DDR_PLL_FREQ, &dxr2_ddr3_ioregs, &dxr2_ddr3_data,
- &dxr2_ddr3_cmd_ctrl_data, &dxr2_ddr3_emif_reg_data, 0);
+ draco_ddr3_emif_reg_data.sdram_config = settings.ddr3.sdram_config;
+ draco_ddr3_emif_reg_data.ref_ctrl = settings.ddr3.ref_ctrl;
+
+ draco_ddr3_data.datardsratio0 = settings.ddr3.dt0rdsratio0;
+ draco_ddr3_data.datawdsratio0 = settings.ddr3.dt0wdsratio0;
+ draco_ddr3_data.datafwsratio0 = settings.ddr3.dt0fwsratio0;
+ draco_ddr3_data.datawrsratio0 = settings.ddr3.dt0wrsratio0;
+
+ draco_ddr3_cmd_ctrl_data.cmd0csratio = settings.ddr3.ddr3_sratio;
+ draco_ddr3_cmd_ctrl_data.cmd0iclkout = settings.ddr3.iclkout;
+ draco_ddr3_cmd_ctrl_data.cmd1csratio = settings.ddr3.ddr3_sratio;
+ draco_ddr3_cmd_ctrl_data.cmd1iclkout = settings.ddr3.iclkout;
+ draco_ddr3_cmd_ctrl_data.cmd2csratio = settings.ddr3.ddr3_sratio;
+ draco_ddr3_cmd_ctrl_data.cmd2iclkout = settings.ddr3.iclkout;
+
+ draco_ddr3_ioregs.cm0ioctl = settings.ddr3.ioctr_val,
+ draco_ddr3_ioregs.cm1ioctl = settings.ddr3.ioctr_val,
+ draco_ddr3_ioregs.cm2ioctl = settings.ddr3.ioctr_val,
+ draco_ddr3_ioregs.dt0ioctl = settings.ddr3.ioctr_val,
+ draco_ddr3_ioregs.dt1ioctl = settings.ddr3.ioctr_val,
+
+ config_ddr(DDR_PLL_FREQ, &draco_ddr3_ioregs, &draco_ddr3_data,
+ &draco_ddr3_cmd_ctrl_data, &draco_ddr3_emif_reg_data, 0);
}
static void spl_siemens_board_init(void)
diff --git a/board/siemens/dxr2/board.h b/board/siemens/draco/board.h
index abf5432..ff8ab76 100644
--- a/board/siemens/dxr2/board.h
+++ b/board/siemens/draco/board.h
@@ -22,24 +22,26 @@
#define MAGIC_CHIP 0x50494843
/* Automatic generated definition */
-/* Wed, 18 Sep 2013 18:58:27 +0200 */
-/* From file: draco/ddr3-data-micron-v2.txt */
+/* Wed, 16 Apr 2014 16:50:41 +0200 */
+/* From file: draco/ddr3-data-universal-default@303MHz-i0-ES3.txt */
struct ddr3_data {
unsigned int magic; /* 0x33524444 */
- unsigned int version; /* 0x56312e34 */
- unsigned short int ddr3_sratio; /* 0x0100 */
- unsigned short int iclkout; /* 0x0001 */
+ unsigned int version; /* 0x56312e35 */
+ unsigned short int ddr3_sratio; /* 0x0080 */
+ unsigned short int iclkout; /* 0x0000 */
unsigned short int dt0rdsratio0; /* 0x003A */
- unsigned short int dt0wdsratio0; /* 0x008A */
- unsigned short int dt0fwsratio0; /* 0x010B */
- unsigned short int dt0wrsratio0; /* 0x00C4 */
+ unsigned short int dt0wdsratio0; /* 0x003F */
+ unsigned short int dt0fwsratio0; /* 0x009F */
+ unsigned short int dt0wrsratio0; /* 0x0079 */
unsigned int sdram_tim1; /* 0x0888A39B */
unsigned int sdram_tim2; /* 0x26247FDA */
unsigned int sdram_tim3; /* 0x501F821F */
unsigned int emif_ddr_phy_ctlr_1; /* 0x00100206 */
- unsigned int sdram_config; /* 0x61C04AB2 */
- unsigned int ref_ctrl; /* 0x00000618 */
- unsigned int ioctr_val; /* 0x0000018B */
+ unsigned int sdram_config; /* 0x61A44A32 */
+ unsigned int ref_ctrl; /* 0x0000093B */
+ unsigned int ioctr_val; /* 0x0000014A */
+ char manu_name[32]; /* "default@303MHz \0" */
+ char manu_marking[32]; /* "default \0" */
};
struct chip_data {
@@ -48,7 +50,7 @@ struct chip_data {
char shwver[7];
};
-struct dxr2_baseboard_id {
+struct draco_baseboard_id {
struct ddr3_data ddr3;
struct chip_data chip;
};
diff --git a/board/siemens/dxr2/mux.c b/board/siemens/draco/mux.c
index f2314b5..eaa3c70 100644
--- a/board/siemens/dxr2/mux.c
+++ b/board/siemens/draco/mux.c
@@ -1,5 +1,5 @@
/*
- * pinmux setup for siemens dxr2 board
+ * pinmux setup for siemens draco board
*
* (C) Copyright 2013 Siemens Schweiz AG
* (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
diff --git a/board/siemens/pxm2/board.c b/board/siemens/pxm2/board.c
index 98083d5..64e69dc 100644
--- a/board/siemens/pxm2/board.c
+++ b/board/siemens/pxm2/board.c
@@ -70,11 +70,11 @@ struct cmd_control pxm2_ddr3_cmd_ctrl_data = {
};
const struct ctrl_ioregs ioregs = {
- .cm0ioctl = DXR2_IOCTRL_VAL,
- .cm1ioctl = DXR2_IOCTRL_VAL,
- .cm2ioctl = DXR2_IOCTRL_VAL,
- .dt0ioctl = DXR2_IOCTRL_VAL,
- .dt1ioctl = DXR2_IOCTRL_VAL,
+ .cm0ioctl = DDR_IOCTRL_VAL,
+ .cm1ioctl = DDR_IOCTRL_VAL,
+ .cm2ioctl = DDR_IOCTRL_VAL,
+ .dt0ioctl = DDR_IOCTRL_VAL,
+ .dt1ioctl = DDR_IOCTRL_VAL,
};
config_ddr(DDR_PLL_FREQ, &ioregs, &pxm2_ddr3_data,
diff --git a/board/siemens/rut/board.c b/board/siemens/rut/board.c
index e0ada3f..1752df2 100644
--- a/board/siemens/rut/board.c
+++ b/board/siemens/rut/board.c
@@ -400,7 +400,7 @@ static int conf_disp_pll(int m, int n)
#if defined(DISPL_PLL_SPREAD_SPECTRUM)
writel(0x64, &cmwkup->resv6[3]); /* 0x50 */
writel(0x800, &cmwkup->resv6[2]); /* 0x4c */
- writel(readl(&cmwkup->clkmoddplldisp) | (1 << 12),
+ writel(readl(&cmwkup->clkmoddplldisp) | CM_CLKMODE_DPLL_SSC_EN_MASK,
&cmwkup->clkmoddplldisp); /* 0x98 */
#endif
return 0;
diff --git a/board/ti/am335x/u-boot.lds b/board/ti/am335x/u-boot.lds
index a9e3d34..2c5a0f8 100644
--- a/board/ti/am335x/u-boot.lds
+++ b/board/ti/am335x/u-boot.lds
@@ -34,6 +34,7 @@ SECTIONS
.text :
{
*(.__image_copy_start)
+ *(.vectors)
CPUDIR/start.o (.text*)
board/ti/am335x/built-in.o (.text*)
*(.text*)
diff --git a/board/wandboard/wandboard.c b/board/wandboard/wandboard.c
index f1951dc..3c8b7a5 100644
--- a/board/wandboard/wandboard.c
+++ b/board/wandboard/wandboard.c
@@ -1,5 +1,6 @@
/*
* Copyright (C) 2013 Freescale Semiconductor, Inc.
+ * Copyright (C) 2014 O.S. Systems Software LTDA.
*
* Author: Fabio Estevam <fabio.estevam@freescale.com>
*
@@ -15,18 +16,19 @@
#include <asm/arch/sys_proto.h>
#include <asm/gpio.h>
#include <asm/imx-common/iomux-v3.h>
+#include <asm/imx-common/mxc_i2c.h>
#include <asm/imx-common/boot_mode.h>
+#include <asm/imx-common/video.h>
#include <asm/io.h>
#include <linux/sizes.h>
#include <common.h>
#include <fsl_esdhc.h>
-#include <ipu_pixfmt.h>
#include <mmc.h>
#include <miiphy.h>
#include <netdev.h>
-#include <linux/fb.h>
#include <phy.h>
#include <input.h>
+#include <i2c.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -41,6 +43,10 @@ DECLARE_GLOBAL_DATA_PTR;
#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
+#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
+ PAD_CTL_ODE | PAD_CTL_SRE_FAST)
+
#define USDHC1_CD_GPIO IMX_GPIO_NR(1, 2)
#define USDHC3_CD_GPIO IMX_GPIO_NR(3, 9)
#define ETH_PHY_RESET IMX_GPIO_NR(3, 29)
@@ -210,38 +216,120 @@ int board_phy_config(struct phy_device *phydev)
}
#if defined(CONFIG_VIDEO_IPUV3)
-static struct fb_videomode const hdmi = {
- .name = "HDMI",
- .refresh = 60,
- .xres = 1024,
- .yres = 768,
- .pixclock = 15385,
- .left_margin = 220,
- .right_margin = 40,
- .upper_margin = 21,
- .lower_margin = 7,
- .hsync_len = 60,
- .vsync_len = 10,
- .sync = FB_SYNC_EXT,
- .vmode = FB_VMODE_NONINTERLACED
+struct i2c_pads_info i2c2_pad_info = {
+ .scl = {
+ .i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL
+ | MUX_PAD_CTRL(I2C_PAD_CTRL),
+ .gpio_mode = MX6_PAD_KEY_COL3__GPIO4_IO12
+ | MUX_PAD_CTRL(I2C_PAD_CTRL),
+ .gp = IMX_GPIO_NR(4, 12)
+ },
+ .sda = {
+ .i2c_mode = MX6_PAD_KEY_ROW3__I2C2_SDA
+ | MUX_PAD_CTRL(I2C_PAD_CTRL),
+ .gpio_mode = MX6_PAD_KEY_ROW3__GPIO4_IO13
+ | MUX_PAD_CTRL(I2C_PAD_CTRL),
+ .gp = IMX_GPIO_NR(4, 13)
+ }
};
-int board_video_skip(void)
-{
- int ret;
+static iomux_v3_cfg_t const fwadapt_7wvga_pads[] = {
+ MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK,
+ MX6_PAD_DI0_PIN2__IPU1_DI0_PIN02, /* HSync */
+ MX6_PAD_DI0_PIN3__IPU1_DI0_PIN03, /* VSync */
+ MX6_PAD_DI0_PIN4__IPU1_DI0_PIN04
+ | MUX_PAD_CTRL(PAD_CTL_DSE_120ohm), /* Contrast */
+ MX6_PAD_DI0_PIN15__IPU1_DI0_PIN15, /* DISP0_DRDY */
+
+ MX6_PAD_DISP0_DAT0__IPU1_DISP0_DATA00,
+ MX6_PAD_DISP0_DAT1__IPU1_DISP0_DATA01,
+ MX6_PAD_DISP0_DAT2__IPU1_DISP0_DATA02,
+ MX6_PAD_DISP0_DAT3__IPU1_DISP0_DATA03,
+ MX6_PAD_DISP0_DAT4__IPU1_DISP0_DATA04,
+ MX6_PAD_DISP0_DAT5__IPU1_DISP0_DATA05,
+ MX6_PAD_DISP0_DAT6__IPU1_DISP0_DATA06,
+ MX6_PAD_DISP0_DAT7__IPU1_DISP0_DATA07,
+ MX6_PAD_DISP0_DAT8__IPU1_DISP0_DATA08,
+ MX6_PAD_DISP0_DAT9__IPU1_DISP0_DATA09,
+ MX6_PAD_DISP0_DAT10__IPU1_DISP0_DATA10,
+ MX6_PAD_DISP0_DAT11__IPU1_DISP0_DATA11,
+ MX6_PAD_DISP0_DAT12__IPU1_DISP0_DATA12,
+ MX6_PAD_DISP0_DAT13__IPU1_DISP0_DATA13,
+ MX6_PAD_DISP0_DAT14__IPU1_DISP0_DATA14,
+ MX6_PAD_DISP0_DAT15__IPU1_DISP0_DATA15,
+ MX6_PAD_DISP0_DAT16__IPU1_DISP0_DATA16,
+ MX6_PAD_DISP0_DAT17__IPU1_DISP0_DATA17,
+
+ MX6_PAD_SD4_DAT2__GPIO2_IO10
+ | MUX_PAD_CTRL(NO_PAD_CTRL), /* DISP0_BKLEN */
+ MX6_PAD_SD4_DAT3__GPIO2_IO11
+ | MUX_PAD_CTRL(NO_PAD_CTRL), /* DISP0_VDDEN */
+};
- ret = ipuv3_fb_init(&hdmi, 0, IPU_PIX_FMT_RGB24);
+static void do_enable_hdmi(struct display_info_t const *dev)
+{
+ imx_enable_hdmi_phy();
+}
- if (ret) {
- printf("HDMI cannot be configured: %d\n", ret);
- return ret;
- }
+static int detect_i2c(struct display_info_t const *dev)
+{
+ return (0 == i2c_set_bus_num(dev->bus)) &&
+ (0 == i2c_probe(dev->addr));
+}
- imx_enable_hdmi_phy();
+static void enable_fwadapt_7wvga(struct display_info_t const *dev)
+{
+ imx_iomux_v3_setup_multiple_pads(
+ fwadapt_7wvga_pads,
+ ARRAY_SIZE(fwadapt_7wvga_pads));
- return ret;
+ gpio_direction_output(IMX_GPIO_NR(2, 10), 1);
+ gpio_direction_output(IMX_GPIO_NR(2, 11), 1);
}
+struct display_info_t const displays[] = {{
+ .bus = -1,
+ .addr = 0,
+ .pixfmt = IPU_PIX_FMT_RGB24,
+ .detect = detect_hdmi,
+ .enable = do_enable_hdmi,
+ .mode = {
+ .name = "HDMI",
+ .refresh = 60,
+ .xres = 1024,
+ .yres = 768,
+ .pixclock = 15385,
+ .left_margin = 220,
+ .right_margin = 40,
+ .upper_margin = 21,
+ .lower_margin = 7,
+ .hsync_len = 60,
+ .vsync_len = 10,
+ .sync = FB_SYNC_EXT,
+ .vmode = FB_VMODE_NONINTERLACED
+} }, {
+ .bus = 1,
+ .addr = 0x10,
+ .pixfmt = IPU_PIX_FMT_RGB666,
+ .detect = detect_i2c,
+ .enable = enable_fwadapt_7wvga,
+ .mode = {
+ .name = "FWBADAPT-LCD-F07A-0102",
+ .refresh = 60,
+ .xres = 800,
+ .yres = 480,
+ .pixclock = 33260,
+ .left_margin = 128,
+ .right_margin = 128,
+ .upper_margin = 22,
+ .lower_margin = 22,
+ .hsync_len = 1,
+ .vsync_len = 1,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED
+} } };
+size_t display_count = ARRAY_SIZE(displays);
+
static void setup_display(void)
{
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
@@ -254,6 +342,10 @@ static void setup_display(void)
reg |= (CHSCCDR_CLK_SEL_LDB_DI0
<< MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET);
writel(reg, &mxc_ccm->chsccdr);
+
+ /* Disable LCD backlight */
+ imx_iomux_v3_setup_pad(MX6_PAD_DI0_PIN4__GPIO4_IO20);
+ gpio_direction_input(IMX_GPIO_NR(4, 20));
}
#endif /* CONFIG_VIDEO_IPUV3 */
@@ -305,6 +397,8 @@ int board_init(void)
/* address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+ setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c2_pad_info);
+
return 0;
}
diff --git a/boards.cfg b/boards.cfg
index 0497a91..d31bdba 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -257,10 +257,12 @@ Active arm armv7 am33xx BuR tseries
Active arm armv7 am33xx BuR tseries tseries_nand tseries:SERIAL1,CONS_INDEX=1,NAND Hannes Petermaier <hannes.petermaier@br-automation.com>
Active arm armv7 am33xx BuR tseries tseries_spi tseries:SERIAL1,CONS_INDEX=1,SPI_BOOT,EMMC_BOOT Hannes Petermaier <hannes.petermaier@br-automation.com>
Active arm armv7 am33xx compulab cm_t335 cm_t335 - Igor Grinberg <grinberg@compulab.co.il>
+Active arm armv7 am33xx gumstix pepper pepper - Ash Charles <ash@gumstix.com>
Active arm armv7 am33xx isee igep0033 am335x_igep0033 - Enric Balletbo i Serra <eballetbo@iseebcn.com>
Active arm armv7 am33xx phytec pcm051 pcm051_rev1 pcm051:REV1 Lars Poeschel <poeschel@lemonage.de>
Active arm armv7 am33xx phytec pcm051 pcm051_rev3 pcm051:REV3 Lars Poeschel <poeschel@lemonage.de>
-Active arm armv7 am33xx siemens dxr2 dxr2 - Roger Meier <r.meier@siemens.com>
+Active arm armv7 am33xx siemens draco draco - Roger Meier <r.meier@siemens.com>
+Active arm armv7 am33xx siemens draco dxr2 - Roger Meier <r.meier@siemens.com>
Active arm armv7 am33xx siemens pxm2 pxm2 - Roger Meier <r.meier@siemens.com>
Active arm armv7 am33xx siemens rut rut - Roger Meier <r.meier@siemens.com>
Active arm armv7 am33xx silica pengwyn pengwyn - Lothar Felten <lothar.felten@gmail.com>
@@ -318,6 +320,8 @@ Active arm armv7 mx6 boundary nitrogen6x
Active arm armv7 mx6 boundary nitrogen6x nitrogen6s nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s.cfg,MX6S,DDR_MB=512 Eric Nelson <eric.nelson@boundarydevices.com>
Active arm armv7 mx6 boundary nitrogen6x nitrogen6s1g nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s1g.cfg,MX6S,DDR_MB=1024 Eric Nelson <eric.nelson@boundarydevices.com>
Active arm armv7 mx6 congatec cgtqmx6eval cgtqmx6qeval cgtqmx6eval:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg,MX6Q Leo Sartre <lsartre@adeneo-embedded.com>
+Active arm armv7 mx6 embest mx6boards marsboard embestmx6boards:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q.cfg,MX6Q,DDR_MB=1024,ENV_IS_IN_SPI_FLASH Eric Bénard <eric@eukrea.com>
+Active arm armv7 mx6 embest mx6boards riotboard embestmx6boards:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s1g.cfg,MX6S,DDR_MB=1024,ENV_IS_IN_MMC Eric Bénard <eric@eukrea.com>
Active arm armv7 mx6 freescale mx6qarm2 mx6qarm2 mx6qarm2:IMX_CONFIG=board/freescale/mx6qarm2/imximage.cfg Jason Liu <r64343@freescale.com>
Active arm armv7 mx6 freescale mx6qsabreauto mx6qsabreauto mx6qsabreauto:IMX_CONFIG=board/freescale/mx6qsabreauto/imximage.cfg,MX6Q Fabio Estevam <fabio.estevam@freescale.com>
Active arm armv7 mx6 freescale mx6sabresd mx6dlsabresd mx6sabresd:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl.cfg,MX6DL Fabio Estevam <fabio.estevam@freescale.com>
@@ -370,7 +374,7 @@ Active arm armv7 rmobile renesas koelsch
Active arm armv7 rmobile renesas koelsch koelsch_nor koelsch:NORFLASH Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Active arm armv7 rmobile renesas lager lager - Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Active arm armv7 rmobile renesas lager lager_nor lager:NORFLASH Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
-Active arm armv7 s5pc1xx samsung goni s5p_goni - Mateusz Zalega <m.zalega@samsung.com>
+Active arm armv7 s5pc1xx samsung goni s5p_goni - Przemyslaw Marczak <p.marczak@samsung.com>
Active arm armv7 s5pc1xx samsung smdkc100 smdkc100 - Minkyu Kang <mk7.kang@samsung.com>
Active arm armv7 socfpga altera socfpga socfpga_cyclone5 - -
Active arm armv7 u8500 st-ericsson snowball snowball - Mathieu Poirier <mathieu.poirier@linaro.org>
@@ -652,6 +656,7 @@ Active powerpc mpc8260 - - cpu86
Active powerpc mpc8260 - - cpu86 CPU86_ROMBOOT CPU86:BOOT_ROM Wolfgang Denk <wd@denx.de>
Active powerpc mpc8260 - - cpu87 CPU87 - -
Active powerpc mpc8260 - - cpu87 CPU87_ROMBOOT CPU87:BOOT_ROM -
+Active powerpc mpc8260 - - ep8248 ep8248 - Yuli Barcohen <yuli@arabellasw.com>
Active powerpc mpc8260 - - iphase4539 IPHASE4539 - Wolfgang Grandegger <wg@denx.de>
Active powerpc mpc8260 - - muas3001 muas3001 - Heiko Schocher <hs@denx.de>
Active powerpc mpc8260 - - muas3001 muas3001_dev muas3001:MUAS_DEV_BOARD Heiko Schocher <hs@denx.de>
diff --git a/common/spl/spl_nand.c b/common/spl/spl_nand.c
index 9da0218..062461b 100644
--- a/common/spl/spl_nand.c
+++ b/common/spl/spl_nand.c
@@ -76,7 +76,7 @@ void spl_nand_load_image(void)
#endif
/* Load u-boot */
nand_spl_load_image(CONFIG_SYS_NAND_U_BOOT_OFFS,
- CONFIG_SYS_NAND_PAGE_SIZE, (void *)header);
+ sizeof(*header), (void *)header);
spl_parse_image_header(header);
nand_spl_load_image(CONFIG_SYS_NAND_U_BOOT_OFFS,
spl_image.size, (void *)spl_image.load_addr);
diff --git a/drivers/gpio/s5p_gpio.c b/drivers/gpio/s5p_gpio.c
index 11a0472..db7b673 100644
--- a/drivers/gpio/s5p_gpio.c
+++ b/drivers/gpio/s5p_gpio.c
@@ -8,11 +8,9 @@
#include <common.h>
#include <asm/io.h>
#include <asm/gpio.h>
+#include <asm/arch/gpio.h>
-#define S5P_GPIO_GET_BANK(x) ((x >> S5P_GPIO_BANK_SHIFT) \
- & S5P_GPIO_BANK_MASK)
-
-#define S5P_GPIO_GET_PIN(x) (x & S5P_GPIO_PIN_MASK)
+#define S5P_GPIO_GET_PIN(x) (x % GPIO_PER_BANK)
#define CON_MASK(x) (0xf << ((x) << 2))
#define CON_SFR(x, v) ((v) << ((x) << 2))
@@ -28,7 +26,103 @@
#define RATE_MASK(x) (0x1 << (x + 16))
#define RATE_SET(x) (0x1 << (x + 16))
-void s5p_gpio_cfg_pin(struct s5p_gpio_bank *bank, int gpio, int cfg)
+#define name_to_gpio(n) s5p_name_to_gpio(n)
+static inline int s5p_name_to_gpio(const char *name)
+{
+ unsigned num, irregular_set_number, irregular_bank_base;
+ const struct gpio_name_num_table *tabp;
+ char this_bank, bank_name, irregular_bank_name;
+ char *endp;
+
+ /*
+ * The gpio name starts with either 'g' or 'gp' followed by the bank
+ * name character. Skip one or two characters depending on the prefix.
+ */
+ if (name[0] == 'g' && name[1] == 'p')
+ name += 2;
+ else if (name[0] == 'g')
+ name++;
+ else
+ return -1; /* Name must start with 'g' */
+
+ bank_name = *name++;
+ if (!*name)
+ return -1; /* At least one digit is required/expected. */
+
+ /*
+ * On both exynos5 and exynos5420 architectures there is a bank of
+ * GPIOs which does not fall into the regular address pattern. Those
+ * banks are c4 on Exynos5 and y7 on Exynos5420. The rest of the below
+ * assignments help to handle these irregularities.
+ */
+#if defined(CONFIG_EXYNOS4) || defined(CONFIG_EXYNOS5)
+ if (cpu_is_exynos5()) {
+ if (proid_is_exynos5420()) {
+ tabp = exynos5420_gpio_table;
+ irregular_bank_name = 'y';
+ irregular_set_number = '7';
+ irregular_bank_base = EXYNOS5420_GPIO_Y70;
+ } else {
+ tabp = exynos5_gpio_table;
+ irregular_bank_name = 'c';
+ irregular_set_number = '4';
+ irregular_bank_base = EXYNOS5_GPIO_C40;
+ }
+ } else {
+ if (proid_is_exynos4412())
+ tabp = exynos4x12_gpio_table;
+ else
+ tabp = exynos4_gpio_table;
+ irregular_bank_name = 0;
+ irregular_set_number = 0;
+ irregular_bank_base = 0;
+ }
+#else
+ if (cpu_is_s5pc110())
+ tabp = s5pc110_gpio_table;
+ else
+ tabp = s5pc100_gpio_table;
+ irregular_bank_name = 0;
+ irregular_set_number = 0;
+ irregular_bank_base = 0;
+#endif
+
+ this_bank = tabp->bank;
+ do {
+ if (bank_name == this_bank) {
+ unsigned pin_index; /* pin number within the bank */
+ if ((bank_name == irregular_bank_name) &&
+ (name[0] == irregular_set_number)) {
+ pin_index = name[1] - '0';
+ /* Irregular sets have 8 pins. */
+ if (pin_index >= GPIO_PER_BANK)
+ return -1;
+ num = irregular_bank_base + pin_index;
+ } else {
+ pin_index = simple_strtoul(name, &endp, 8);
+ pin_index -= tabp->bank_offset;
+ /*
+ * Sanity check: bunk 'z' has no set number,
+ * for all other banks there must be exactly
+ * two octal digits, and the resulting number
+ * should not exceed the number of pins in the
+ * bank.
+ */
+ if (((bank_name != 'z') && !name[1]) ||
+ *endp ||
+ (pin_index >= tabp->bank_size))
+ return -1;
+ num = tabp->base + pin_index;
+ }
+ return num;
+ }
+ this_bank = (++tabp)->bank;
+ } while (this_bank);
+
+ return -1;
+}
+
+static void s5p_gpio_cfg_pin(struct s5p_gpio_bank *bank, int gpio, int cfg)
{
unsigned int value;
@@ -38,18 +132,7 @@ void s5p_gpio_cfg_pin(struct s5p_gpio_bank *bank, int gpio, int cfg)
writel(value, &bank->con);
}
-void s5p_gpio_direction_output(struct s5p_gpio_bank *bank, int gpio, int en)
-{
- s5p_gpio_cfg_pin(bank, gpio, GPIO_OUTPUT);
- s5p_gpio_set_value(bank, gpio, en);
-}
-
-void s5p_gpio_direction_input(struct s5p_gpio_bank *bank, int gpio)
-{
- s5p_gpio_cfg_pin(bank, gpio, GPIO_INPUT);
-}
-
-void s5p_gpio_set_value(struct s5p_gpio_bank *bank, int gpio, int en)
+static void s5p_gpio_set_value(struct s5p_gpio_bank *bank, int gpio, int en)
{
unsigned int value;
@@ -60,7 +143,19 @@ void s5p_gpio_set_value(struct s5p_gpio_bank *bank, int gpio, int en)
writel(value, &bank->dat);
}
-unsigned int s5p_gpio_get_value(struct s5p_gpio_bank *bank, int gpio)
+static void s5p_gpio_direction_output(struct s5p_gpio_bank *bank,
+ int gpio, int en)
+{
+ s5p_gpio_cfg_pin(bank, gpio, S5P_GPIO_OUTPUT);
+ s5p_gpio_set_value(bank, gpio, en);
+}
+
+static void s5p_gpio_direction_input(struct s5p_gpio_bank *bank, int gpio)
+{
+ s5p_gpio_cfg_pin(bank, gpio, S5P_GPIO_INPUT);
+}
+
+static unsigned int s5p_gpio_get_value(struct s5p_gpio_bank *bank, int gpio)
{
unsigned int value;
@@ -68,7 +163,7 @@ unsigned int s5p_gpio_get_value(struct s5p_gpio_bank *bank, int gpio)
return !!(value & DAT_MASK(gpio));
}
-void s5p_gpio_set_pull(struct s5p_gpio_bank *bank, int gpio, int mode)
+static void s5p_gpio_set_pull(struct s5p_gpio_bank *bank, int gpio, int mode)
{
unsigned int value;
@@ -76,8 +171,8 @@ void s5p_gpio_set_pull(struct s5p_gpio_bank *bank, int gpio, int mode)
value &= ~PULL_MASK(gpio);
switch (mode) {
- case GPIO_PULL_DOWN:
- case GPIO_PULL_UP:
+ case S5P_GPIO_PULL_DOWN:
+ case S5P_GPIO_PULL_UP:
value |= PULL_MODE(gpio, mode);
break;
default:
@@ -87,7 +182,7 @@ void s5p_gpio_set_pull(struct s5p_gpio_bank *bank, int gpio, int mode)
writel(value, &bank->pull);
}
-void s5p_gpio_set_drv(struct s5p_gpio_bank *bank, int gpio, int mode)
+static void s5p_gpio_set_drv(struct s5p_gpio_bank *bank, int gpio, int mode)
{
unsigned int value;
@@ -95,10 +190,10 @@ void s5p_gpio_set_drv(struct s5p_gpio_bank *bank, int gpio, int mode)
value &= ~DRV_MASK(gpio);
switch (mode) {
- case GPIO_DRV_1X:
- case GPIO_DRV_2X:
- case GPIO_DRV_3X:
- case GPIO_DRV_4X:
+ case S5P_GPIO_DRV_1X:
+ case S5P_GPIO_DRV_2X:
+ case S5P_GPIO_DRV_3X:
+ case S5P_GPIO_DRV_4X:
value |= DRV_SET(gpio, mode);
break;
default:
@@ -108,7 +203,7 @@ void s5p_gpio_set_drv(struct s5p_gpio_bank *bank, int gpio, int mode)
writel(value, &bank->drv);
}
-void s5p_gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode)
+static void s5p_gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode)
{
unsigned int value;
@@ -116,8 +211,8 @@ void s5p_gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode)
value &= ~RATE_MASK(gpio);
switch (mode) {
- case GPIO_DRV_FAST:
- case GPIO_DRV_SLOW:
+ case S5P_GPIO_DRV_FAST:
+ case S5P_GPIO_DRV_SLOW:
value |= RATE_SET(gpio);
break;
default:
@@ -127,12 +222,31 @@ void s5p_gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode)
writel(value, &bank->drv);
}
-struct s5p_gpio_bank *s5p_gpio_get_bank(unsigned gpio)
+struct s5p_gpio_bank *s5p_gpio_get_bank(unsigned int gpio)
{
- unsigned bank = S5P_GPIO_GET_BANK(gpio);
- unsigned base = s5p_gpio_base(gpio);
+ const struct gpio_info *data;
+ unsigned int upto;
+ int i, count;
+
+ data = get_gpio_data();
+ count = get_bank_num();
+ upto = 0;
+
+ for (i = 0; i < count; i++) {
+ debug("i=%d, upto=%d\n", i, upto);
+ if (gpio < data->max_gpio) {
+ struct s5p_gpio_bank *bank;
+ bank = (struct s5p_gpio_bank *)data->reg_addr;
+ bank += (gpio - upto) / GPIO_PER_BANK;
+ debug("gpio=%d, bank=%p\n", gpio, bank);
+ return bank;
+ }
+
+ upto = data->max_gpio;
+ data++;
+ }
- return (struct s5p_gpio_bank *)(base + bank);
+ return NULL;
}
int s5p_gpio_get_pin(unsigned gpio)
@@ -179,3 +293,27 @@ int gpio_set_value(unsigned gpio, int value)
return 0;
}
+
+void gpio_set_pull(int gpio, int mode)
+{
+ s5p_gpio_set_pull(s5p_gpio_get_bank(gpio),
+ s5p_gpio_get_pin(gpio), mode);
+}
+
+void gpio_set_drv(int gpio, int mode)
+{
+ s5p_gpio_set_drv(s5p_gpio_get_bank(gpio),
+ s5p_gpio_get_pin(gpio), mode);
+}
+
+void gpio_cfg_pin(int gpio, int cfg)
+{
+ s5p_gpio_cfg_pin(s5p_gpio_get_bank(gpio),
+ s5p_gpio_get_pin(gpio), cfg);
+}
+
+void gpio_set_rate(int gpio, int mode)
+{
+ s5p_gpio_set_rate(s5p_gpio_get_bank(gpio),
+ s5p_gpio_get_pin(gpio), mode);
+}
diff --git a/drivers/gpio/tegra_gpio.c b/drivers/gpio/tegra_gpio.c
index 82b30d5..fea9d17 100644
--- a/drivers/gpio/tegra_gpio.c
+++ b/drivers/gpio/tegra_gpio.c
@@ -221,6 +221,26 @@ int gpio_set_value(unsigned gpio, int value)
return 0;
}
+void gpio_config_table(const struct tegra_gpio_config *config, int len)
+{
+ int i;
+
+ for (i = 0; i < len; i++) {
+ switch (config[i].init) {
+ case TEGRA_GPIO_INIT_IN:
+ gpio_direction_input(config[i].gpio);
+ break;
+ case TEGRA_GPIO_INIT_OUT0:
+ gpio_direction_output(config[i].gpio, 0);
+ break;
+ case TEGRA_GPIO_INIT_OUT1:
+ gpio_direction_output(config[i].gpio, 1);
+ break;
+ }
+ set_config(config[i].gpio, 1);
+ }
+}
+
/*
* Display Tegra GPIO information
*/
diff --git a/drivers/mmc/tegra_mmc.c b/drivers/mmc/tegra_mmc.c
index ed67eec..ca9c4aa 100644
--- a/drivers/mmc/tegra_mmc.c
+++ b/drivers/mmc/tegra_mmc.c
@@ -18,7 +18,7 @@
DECLARE_GLOBAL_DATA_PTR;
-struct mmc_host mmc_host[MAX_HOSTS];
+struct mmc_host mmc_host[CONFIG_SYS_MMC_MAX_DEVICE];
#ifndef CONFIG_OF_CONTROL
#error "Please enable device tree support to use this driver"
@@ -669,13 +669,14 @@ static int process_nodes(const void *blob, int node_list[], int count)
void tegra_mmc_init(void)
{
- int node_list[MAX_HOSTS], count;
+ int node_list[CONFIG_SYS_MMC_MAX_DEVICE], count;
const void *blob = gd->fdt_blob;
debug("%s entry\n", __func__);
/* See if any Tegra124 MMC controllers are present */
count = fdtdec_find_aliases_for_id(blob, "sdhci",
- COMPAT_NVIDIA_TEGRA124_SDMMC, node_list, MAX_HOSTS);
+ COMPAT_NVIDIA_TEGRA124_SDMMC, node_list,
+ CONFIG_SYS_MMC_MAX_DEVICE);
debug("%s: count of Tegra124 sdhci nodes is %d\n", __func__, count);
if (process_nodes(blob, node_list, count)) {
printf("%s: Error processing T30 mmc node(s)!\n", __func__);
@@ -684,7 +685,8 @@ void tegra_mmc_init(void)
/* See if any Tegra30 MMC controllers are present */
count = fdtdec_find_aliases_for_id(blob, "sdhci",
- COMPAT_NVIDIA_TEGRA30_SDMMC, node_list, MAX_HOSTS);
+ COMPAT_NVIDIA_TEGRA30_SDMMC, node_list,
+ CONFIG_SYS_MMC_MAX_DEVICE);
debug("%s: count of T30 sdhci nodes is %d\n", __func__, count);
if (process_nodes(blob, node_list, count)) {
printf("%s: Error processing T30 mmc node(s)!\n", __func__);
@@ -693,7 +695,8 @@ void tegra_mmc_init(void)
/* Now look for any Tegra20 MMC controllers */
count = fdtdec_find_aliases_for_id(blob, "sdhci",
- COMPAT_NVIDIA_TEGRA20_SDMMC, node_list, MAX_HOSTS);
+ COMPAT_NVIDIA_TEGRA20_SDMMC, node_list,
+ CONFIG_SYS_MMC_MAX_DEVICE);
debug("%s: count of T20 sdhci nodes is %d\n", __func__, count);
if (process_nodes(blob, node_list, count)) {
printf("%s: Error processing T20 mmc node(s)!\n", __func__);
diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c
index 881a636..bf99b8e 100644
--- a/drivers/mtd/nand/omap_gpmc.c
+++ b/drivers/mtd/nand/omap_gpmc.c
@@ -403,7 +403,7 @@ static int omap_correct_data_bch(struct mtd_info *mtd, uint8_t *dat,
dat[byte_pos] ^= 1 << bit_pos;
printf("nand: bit-flip corrected @data=%d\n", byte_pos);
} else if (byte_pos < error_max) {
- read_ecc[byte_pos - SECTOR_BYTES] = 1 << bit_pos;
+ read_ecc[byte_pos - SECTOR_BYTES] ^= 1 << bit_pos;
printf("nand: bit-flip corrected @oob=%d\n", byte_pos -
SECTOR_BYTES);
} else {
diff --git a/drivers/power/pmic/Makefile b/drivers/power/pmic/Makefile
index 4129bda..920bbdc 100644
--- a/drivers/power/pmic/Makefile
+++ b/drivers/power/pmic/Makefile
@@ -5,6 +5,7 @@
# SPDX-License-Identifier: GPL-2.0+
#
+obj-$(CONFIG_POWER_LTC3676) += pmic_ltc3676.o
obj-$(CONFIG_POWER_MAX8998) += pmic_max8998.o
obj-$(CONFIG_POWER_MAX8997) += pmic_max8997.o
obj-$(CONFIG_POWER_MUIC_MAX8997) += muic_max8997.o
diff --git a/drivers/power/pmic/pmic_ltc3676.c b/drivers/power/pmic/pmic_ltc3676.c
new file mode 100644
index 0000000..9b874cb
--- /dev/null
+++ b/drivers/power/pmic/pmic_ltc3676.c
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2014 Gateworks Corporation
+ * Tim Harvey <tharvey@gateworks.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <i2c.h>
+#include <power/pmic.h>
+#include <power/ltc3676_pmic.h>
+
+int power_ltc3676_init(unsigned char bus)
+{
+ static const char name[] = "LTC3676_PMIC";
+ struct pmic *p = pmic_alloc();
+
+ if (!p) {
+ printf("%s: POWER allocation error!\n", __func__);
+ return -ENOMEM;
+ }
+
+ p->name = name;
+ p->interface = PMIC_I2C;
+ p->number_of_regs = LTC3676_NUM_OF_REGS;
+ p->hw.i2c.addr = CONFIG_POWER_LTC3676_I2C_ADDR;
+ p->hw.i2c.tx_num = 1;
+ p->bus = bus;
+
+ return 0;
+}
diff --git a/drivers/power/pmic/pmic_pfuze100.c b/drivers/power/pmic/pmic_pfuze100.c
index 22c1f15..21f12d2 100644
--- a/drivers/power/pmic/pmic_pfuze100.c
+++ b/drivers/power/pmic/pmic_pfuze100.c
@@ -11,7 +11,7 @@
#include <power/pmic.h>
#include <power/pfuze100_pmic.h>
-int pmic_init(unsigned char bus)
+int power_pfuze100_init(unsigned char bus)
{
static const char name[] = "PFUZE100_PMIC";
struct pmic *p = pmic_alloc();
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index c527029..945f35d 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_VIDEO_BCM2835) += bcm2835.o
obj-$(CONFIG_VIDEO_COREBOOT) += coreboot_fb.o
obj-$(CONFIG_VIDEO_CT69000) += ct69000.o videomodes.o
obj-$(CONFIG_VIDEO_DA8XX) += da8xx-fb.o videomodes.o
+obj-$(CONFIG_VIDEO_IMX25LCDC) += imx25lcdc.o videomodes.o
obj-$(CONFIG_VIDEO_MB862xx) += mb862xx.o videomodes.o
obj-$(CONFIG_VIDEO_MB86R0xGDC) += mb86r0xgdc.o videomodes.o
obj-$(CONFIG_VIDEO_MX3) += mx3fb.o videomodes.o
diff --git a/drivers/video/imx25lcdc.c b/drivers/video/imx25lcdc.c
new file mode 100644
index 0000000..ef5767b
--- /dev/null
+++ b/drivers/video/imx25lcdc.c
@@ -0,0 +1,121 @@
+/*
+ * (C) Copyright 2011
+ * Matthias Weisser <weisserm@arcor.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * imx25lcdc.c - Graphic interface for i.MX25 lcd controller
+ */
+
+#include <common.h>
+
+#include <malloc.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <video_fb.h>
+#include "videomodes.h"
+
+/*
+ * 4MB (at the end of system RAM)
+ */
+#define VIDEO_MEM_SIZE 0x400000
+
+#define FB_SYNC_CLK_INV (1<<16) /* pixel clock inverted */
+
+/*
+ * Graphic Device
+ */
+static GraphicDevice imx25fb;
+
+void *video_hw_init(void)
+{
+ struct lcdc_regs *lcdc = (struct lcdc_regs *)IMX_LCDC_BASE;
+ struct ccm_regs *ccm = (struct ccm_regs *)IMX_CCM_BASE;
+ GraphicDevice *pGD = &imx25fb;
+ char *s;
+ u32 *videomem;
+
+ memset(pGD, 0, sizeof(GraphicDevice));
+
+ pGD->gdfIndex = GDF_16BIT_565RGB;
+ pGD->gdfBytesPP = 2;
+ pGD->memSize = VIDEO_MEM_SIZE;
+ pGD->frameAdrs = PHYS_SDRAM + PHYS_SDRAM_SIZE - VIDEO_MEM_SIZE;
+
+ videomem = (u32 *)pGD->frameAdrs;
+
+ s = getenv("videomode");
+ if (s != NULL) {
+ struct ctfb_res_modes var_mode;
+ u32 lsr, lpcr, lhcr, lvcr;
+ unsigned long div;
+ int bpp;
+
+ /* Disable all clocks of the LCDC */
+ writel(readl(&ccm->cgr0) & ~((1<<7) | (1<<24)), &ccm->cgr0);
+ writel(readl(&ccm->cgr1) & ~(1<<29), &ccm->cgr1);
+
+ bpp = video_get_params(&var_mode, s);
+
+ if (bpp == 0) {
+ var_mode.xres = 320;
+ var_mode.yres = 240;
+ var_mode.pixclock = 154000;
+ var_mode.left_margin = 68;
+ var_mode.right_margin = 20;
+ var_mode.upper_margin = 4;
+ var_mode.lower_margin = 18;
+ var_mode.hsync_len = 40;
+ var_mode.vsync_len = 6;
+ var_mode.sync = 0;
+ var_mode.vmode = 0;
+ }
+
+ /* Fill memory with white */
+ memset(videomem, 0xFF, var_mode.xres * var_mode.yres * 2);
+
+ imx25fb.winSizeX = var_mode.xres;
+ imx25fb.winSizeY = var_mode.yres;
+
+ /* LCD base clock is 66.6MHZ. We do calculations in kHz */
+ div = 66000 / (1000000000L / var_mode.pixclock);
+ if (div > 63)
+ div = 63;
+ if (0 == div)
+ div = 1;
+
+ lsr = ((var_mode.xres / 16) << 20) |
+ var_mode.yres;
+ lpcr = (1 << 31) |
+ (1 << 30) |
+ (5 << 25) |
+ (1 << 23) |
+ (1 << 22) |
+ (1 << 19) |
+ (1 << 7) |
+ div;
+ lhcr = (var_mode.right_margin << 0) |
+ (var_mode.left_margin << 8) |
+ (var_mode.hsync_len << 26);
+
+ lvcr = (var_mode.lower_margin << 0) |
+ (var_mode.upper_margin << 8) |
+ (var_mode.vsync_len << 26);
+
+ writel((uint32_t)videomem, &lcdc->lssar);
+ writel(lsr, &lcdc->lsr);
+ writel(var_mode.xres * 2 / 4, &lcdc->lvpwr);
+ writel(lpcr, &lcdc->lpcr);
+ writel(lhcr, &lcdc->lhcr);
+ writel(lvcr, &lcdc->lvcr);
+ writel(0x00040060, &lcdc->ldcr);
+
+ writel(0xA90300, &lcdc->lpccr);
+
+ /* Ensable all clocks of the LCDC */
+ writel(readl(&ccm->cgr0) | ((1<<7) | (1<<24)), &ccm->cgr0);
+ writel(readl(&ccm->cgr1) | (1<<29), &ccm->cgr1);
+ }
+
+ return pGD;
+}
diff --git a/include/configs/beaver.h b/include/configs/beaver.h
index df9a98b..9ff089e 100644
--- a/include/configs/beaver.h
+++ b/include/configs/beaver.h
@@ -21,6 +21,9 @@
#include "tegra30-common.h"
+/* VDD core PMIC */
+#define CONFIG_TEGRA_VDD_CORE_TPS62366A_SET1
+
/* Enable fdt support for Beaver. Flash the image in u-boot-dtb.bin */
#define CONFIG_DEFAULT_DEVICE_TREE tegra30-beaver
#define CONFIG_OF_CONTROL
diff --git a/include/configs/cardhu.h b/include/configs/cardhu.h
index e15b527..59f429c 100644
--- a/include/configs/cardhu.h
+++ b/include/configs/cardhu.h
@@ -21,6 +21,9 @@
#include "tegra30-common.h"
+/* VDD core PMIC */
+#define CONFIG_TEGRA_VDD_CORE_TPS62361B_SET3
+
/* Enable fdt support for Cardhu. Flash the image in u-boot-dtb.bin */
#define CONFIG_DEFAULT_DEVICE_TREE tegra30-cardhu
#define CONFIG_OF_CONTROL
diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
index 860a11d..b279409 100644
--- a/include/configs/da850evm.h
+++ b/include/configs/da850evm.h
@@ -386,6 +386,7 @@
#define CONFIG_SPL_STACK 0x8001ff00
#define CONFIG_SPL_TEXT_BASE 0x80000000
#define CONFIG_SPL_MAX_FOOTPRINT 32768
+#define CONFIG_SPL_PAD_TO 32768
#endif
/* Load U-Boot Image From MMC */
diff --git a/include/configs/draco.h b/include/configs/draco.h
new file mode 100644
index 0000000..a2438d8
--- /dev/null
+++ b/include/configs/draco.h
@@ -0,0 +1,92 @@
+/*
+ * (C) Copyright 2013 Siemens Schweiz AG
+ * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * Based on:
+ * U-Boot file:/include/configs/am335x_evm.h
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_DRACO_H
+#define __CONFIG_DRACO_H
+
+#define CONFIG_SIEMENS_DRACO
+#define MACH_TYPE_DRACO 4314
+#define CONFIG_SIEMENS_MACH_TYPE MACH_TYPE_DRACO
+
+#include "siemens-am33x-common.h"
+
+#define CONFIG_SYS_MPUCLK 275
+#define DDR_PLL_FREQ 303
+#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
+
+#define BOARD_DFU_BUTTON_GPIO 27
+#define BOARD_DFU_BUTTON_LED 64 /* red LED */
+#define BOARD_STATUS_LED 103 /* green LED */
+#define GPIO_LAN9303_NRST 88 /* GPIO2_24 = gpio88 */
+
+#undef CONFIG_DOS_PARTITION
+#undef CONFIG_CMD_FAT
+
+
+ /* Physical Memory Map */
+#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */
+
+/* I2C Configuration */
+#define CONFIG_SYS_I2C_SPEED 100000
+
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
+#define EEPROM_ADDR_DDR3 0x90
+#define EEPROM_ADDR_CHIP 0x120
+
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x300
+
+#undef CONFIG_SPL_NET_SUPPORT
+#undef CONFIG_SPL_NET_VCI_STRING
+#undef CONFIG_SPL_ETH_SUPPORT
+
+#undef CONFIG_MII
+#undef CONFIG_PHY_GIGE
+#define CONFIG_PHY_SMSC
+
+#define CONFIG_FACTORYSET
+
+/* Watchdog */
+#define CONFIG_OMAP_WATCHDOG
+
+#ifndef CONFIG_SPL_BUILD
+
+/* Default env settings */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "nand_img_size=0x400000\0" \
+ "optargs=\0" \
+ CONFIG_COMMON_ENV_SETTINGS
+
+#ifndef CONFIG_RESTORE_FLASH
+/* set to negative value for no autoboot */
+#define CONFIG_BOOTDELAY 3
+
+#define CONFIG_BOOTCOMMAND \
+"if dfubutton; then " \
+ "run dfu_start; " \
+ "reset; " \
+"fi;" \
+"run nand_boot;" \
+"reset;"
+
+
+#else
+#define CONFIG_BOOTDELAY 0
+
+#define CONFIG_BOOTCOMMAND \
+ "setenv autoload no; " \
+ "dhcp; " \
+ "if tftp 80000000 debrick.scr; then " \
+ "source 80000000; " \
+ "fi"
+#endif
+#endif /* CONFIG_SPL_BUILD */
+#endif /* ! __CONFIG_DRACO_H */
diff --git a/include/configs/dxr2.h b/include/configs/dxr2.h
index 75f7812..76e6cac 100644
--- a/include/configs/dxr2.h
+++ b/include/configs/dxr2.h
@@ -20,12 +20,12 @@
#include "siemens-am33x-common.h"
#define CONFIG_SYS_MPUCLK 275
-#define DXR2_IOCTRL_VAL 0x18b
#define DDR_PLL_FREQ 303
#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
#define BOARD_DFU_BUTTON_GPIO 27
-#define BOARD_DFU_BUTTON_LED 64
+#define BOARD_DFU_BUTTON_LED 64 /* red LED */
+#define BOARD_STATUS_LED 103 /* green LED */
#define GPIO_LAN9303_NRST 88 /* GPIO2_24 = gpio88 */
#undef CONFIG_DOS_PARTITION
diff --git a/include/configs/embestmx6boards.h b/include/configs/embestmx6boards.h
new file mode 100644
index 0000000..eb91c44
--- /dev/null
+++ b/include/configs/embestmx6boards.h
@@ -0,0 +1,336 @@
+/*
+ * Copyright (C) 2014 Eukréa Electromatique
+ * Author: Eric Bénard <eric@eukrea.com>
+ *
+ * Configuration settings for the Embest RIoTboard
+ *
+ * based on mx6*sabre*.h which are :
+ * Copyright (C) 2012 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __RIOTBOARD_CONFIG_H
+#define __RIOTBOARD_CONFIG_H
+
+#include <asm/arch/imx-regs.h>
+#include <asm/imx-common/gpio.h>
+
+#include "mx6_common.h"
+#include <linux/sizes.h>
+
+#define CONFIG_MXC_UART_BASE UART2_BASE
+#define CONFIG_CONSOLE_DEV "ttymxc0"
+#define CONFIG_MMCROOT "/dev/mmcblk1p2"
+
+#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024)
+
+#define CONFIG_MX6
+
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
+
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_MXC_GPIO
+
+#define CONFIG_MXC_UART
+
+#define CONFIG_CMD_FUSE
+#ifdef CONFIG_CMD_FUSE
+#define CONFIG_MXC_OCOTP
+#endif
+
+/* I2C Configs */
+#define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_SPEED 100000
+
+/* USB Configs */
+#define CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MX6
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
+#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS 0
+
+/* MMC Configs */
+#define CONFIG_FSL_ESDHC
+#define CONFIG_FSL_USDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR 0
+
+#define CONFIG_MMC
+#define CONFIG_CMD_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_BOUNCE_BUFFER
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_FEC_MXC
+#define CONFIG_MII
+#define IMX_FEC_BASE ENET_BASE_ADDR
+#define CONFIG_FEC_XCV_TYPE RGMII
+#define CONFIG_ETHPRIME "FEC"
+#define CONFIG_FEC_MXC_PHYADDR 4
+
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_ATHEROS
+
+#define CONFIG_CMD_SF
+#ifdef CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_SST
+#define CONFIG_MXC_SPI
+#define CONFIG_SF_DEFAULT_BUS 0
+#define CONFIG_SF_DEFAULT_CS (0 | (IMX_GPIO_NR(2, 30) << 8))
+#define CONFIG_SF_DEFAULT_SPEED 20000000
+#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
+#endif
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 115200
+
+/* Command definition */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BMODE
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_CMD_SETEXPR
+#undef CONFIG_CMD_IMLS
+
+#define CONFIG_BOOTDELAY 1
+
+#define CONFIG_LOADADDR 0x12000000
+#define CONFIG_SYS_TEXT_BASE 0x17800000
+
+#ifdef CONFIG_SUPPORT_EMMC_BOOT
+#define EMMC_ENV \
+ "emmcdev=2\0" \
+ "update_emmc_firmware=" \
+ "if test ${ip_dyn} = yes; then " \
+ "setenv get_cmd dhcp; " \
+ "else " \
+ "setenv get_cmd tftp; " \
+ "fi; " \
+ "if ${get_cmd} ${update_sd_firmware_filename}; then " \
+ "if mmc dev ${emmcdev}; then " \
+ "setexpr fw_sz ${filesize} / 0x200; " \
+ "setexpr fw_sz ${fw_sz} + 1; " \
+ "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
+ "fi; " \
+ "fi\0"
+#else
+#define EMMC_ENV ""
+#endif
+
+#ifdef CONFIG_CMD_SF
+#define SF_ENV \
+ "update_spi_firmware=" \
+ "if test ${ip_dyn} = yes; then " \
+ "setenv get_cmd dhcp; " \
+ "else " \
+ "setenv get_cmd tftp; " \
+ "fi; " \
+ "if ${get_cmd} ${update_spi_firmware_filename}; then " \
+ "if sf probe; then " \
+ "sf erase 0 0xc0000; " \
+ "sf write ${loadaddr} 0x400 ${filesize}; " \
+ "fi; " \
+ "fi\0"
+#else
+#define SF_ENV ""
+#endif
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "script=boot.scr\0" \
+ "image=zImage\0" \
+ "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
+ "fdt_addr=0x18000000\0" \
+ "boot_fdt=try\0" \
+ "ip_dyn=yes\0" \
+ "console=" CONFIG_CONSOLE_DEV "\0" \
+ "fdt_high=0xffffffff\0" \
+ "initrd_high=0xffffffff\0" \
+ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
+ "mmcpart=1\0" \
+ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
+ "update_sd_firmware=" \
+ "if test ${ip_dyn} = yes; then " \
+ "setenv get_cmd dhcp; " \
+ "else " \
+ "setenv get_cmd tftp; " \
+ "fi; " \
+ "if mmc dev ${mmcdev}; then " \
+ "if ${get_cmd} ${update_sd_firmware_filename}; then " \
+ "setexpr fw_sz ${filesize} / 0x200; " \
+ "setexpr fw_sz ${fw_sz} + 1; " \
+ "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
+ "fi; " \
+ "fi\0" \
+ EMMC_ENV \
+ SF_ENV \
+ "mmcargs=setenv bootargs console=${console},${baudrate} " \
+ "root=${mmcroot}\0" \
+ "loadbootscript=" \
+ "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+ "bootscript=echo Running bootscript from mmc ...; " \
+ "source\0" \
+ "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
+ "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+ "mmcboot=echo Booting from mmc ...; " \
+ "run mmcargs; " \
+ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+ "if run loadfdt; then " \
+ "bootz ${loadaddr} - ${fdt_addr}; " \
+ "else " \
+ "if test ${boot_fdt} = try; then " \
+ "bootz; " \
+ "else " \
+ "echo WARN: Cannot load the DT; " \
+ "fi; " \
+ "fi; " \
+ "else " \
+ "bootz; " \
+ "fi;\0" \
+ "netargs=setenv bootargs console=${console},${baudrate} " \
+ "root=/dev/nfs " \
+ "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
+ "netboot=echo Booting from net ...; " \
+ "run netargs; " \
+ "if test ${ip_dyn} = yes; then " \
+ "setenv get_cmd dhcp; " \
+ "else " \
+ "setenv get_cmd tftp; " \
+ "fi; " \
+ "${get_cmd} ${image}; " \
+ "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+ "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
+ "bootz ${loadaddr} - ${fdt_addr}; " \
+ "else " \
+ "if test ${boot_fdt} = try; then " \
+ "bootz; " \
+ "else " \
+ "echo WARN: Cannot load the DT; " \
+ "fi; " \
+ "fi; " \
+ "else " \
+ "bootz; " \
+ "fi;\0"
+
+#define CONFIG_BOOTCOMMAND \
+ "mmc dev ${mmcdev};" \
+ "if mmc rescan; then " \
+ "if run loadbootscript; then " \
+ "run bootscript; " \
+ "else " \
+ "if run loadimage; then " \
+ "run mmcboot; " \
+ "else run netboot; " \
+ "fi; " \
+ "fi; " \
+ "else run netboot; fi"
+
+#define CONFIG_ARP_TIMEOUT 200UL
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_CBSIZE 256
+
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+#define CONFIG_SYS_MEMTEST_START 0x10000000
+#define CONFIG_SYS_MEMTEST_END 0x10010000
+#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
+
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_STACKSIZE (128 * 1024)
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
+
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+/* FLASH and environment organization */
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_ENV_SIZE (8 * 1024)
+
+#if defined(CONFIG_ENV_IS_IN_MMC)
+/* RiOTboard */
+#define CONFIG_DEFAULT_FDT_FILE "imx6s-riotboard.dtb"
+#define CONFIG_SYS_FSL_USDHC_NUM 3
+#define CONFIG_SYS_MMC_ENV_DEV 2 /* SDHC4 */
+#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
+#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
+#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
+/* MarSBoard */
+#define CONFIG_DEFAULT_FDT_FILE "imx6q-marsboard.dtb"
+#define CONFIG_SYS_FSL_USDHC_NUM 2
+#define CONFIG_ENV_OFFSET (768 * 1024)
+#define CONFIG_ENV_SECT_SIZE (8 * 1024)
+#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
+#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
+#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
+#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
+#endif
+
+#define CONFIG_OF_LIBFDT
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+#define CONFIG_CMD_CACHE
+#endif
+
+/* Framebuffer */
+#define CONFIG_VIDEO
+#define CONFIG_VIDEO_IPUV3
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
+#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_SPLASH_SCREEN_ALIGN
+#define CONFIG_BMP_16BPP
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_BMP_LOGO
+#define CONFIG_IPUV3_CLK 260000000
+#define CONFIG_IMX_HDMI
+#define CONFIG_IMX_VIDEO_SKIP
+
+#endif /* __RIOTBOARD_CONFIG_H */
diff --git a/include/configs/exynos5-dt.h b/include/configs/exynos5-dt.h
index 414db42..5a9b1b4 100644
--- a/include/configs/exynos5-dt.h
+++ b/include/configs/exynos5-dt.h
@@ -288,4 +288,6 @@
#define CONFIG_CMD_BOOTZ
+#define CONFIG_CMD_GPIO
+
#endif /* __CONFIG_H */
diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h
index 3398390..cd55495 100644
--- a/include/configs/gw_ventana.h
+++ b/include/configs/gw_ventana.h
@@ -24,6 +24,8 @@
#define CONFIG_SERIAL_TAG
#define CONFIG_REVISION_TAG
+#define CONFIG_SYS_GENERIC_BOARD
+
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
@@ -136,6 +138,8 @@
#define CONFIG_POWER_I2C
#define CONFIG_POWER_PFUZE100
#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
+#define CONFIG_POWER_LTC3676
+#define CONFIG_POWER_LTC3676_I2C_ADDR 0x3c
/* Various command support */
#include <config_cmd_default.h>
@@ -190,6 +194,22 @@
#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
#define CONFIG_USB_HUB_MIN_POWER_ON_DELAY 1200
+/* Framebuffer and LCD */
+#define CONFIG_VIDEO
+#define CONFIG_VIDEO_IPUV3
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_BMP_16BPP
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_IPUV3_CLK 260000000
+#define CONFIG_CMD_HDMIDETECT
+#define CONFIG_CONSOLE_MUX
+#define CONFIG_IMX_HDMI
+#define CONFIG_IMX_VIDEO_SKIP
+
/* serial console (ttymxc1,115200) */
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
diff --git a/include/configs/hummingboard.h b/include/configs/hummingboard.h
index 2895523..34dbdce 100644
--- a/include/configs/hummingboard.h
+++ b/include/configs/hummingboard.h
@@ -27,6 +27,8 @@
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG
+#define CONFIG_SYS_GENERIC_BOARD
+
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (2 * SZ_1M)
diff --git a/include/configs/k2hk_evm.h b/include/configs/k2hk_evm.h
index 9bb8f34..dde7329 100644
--- a/include/configs/k2hk_evm.h
+++ b/include/configs/k2hk_evm.h
@@ -165,6 +165,7 @@
#define CONFIG_CMD_EEPROM
/* U-Boot general configuration */
+#define CONFIG_SYS_GENERIC_BOARD
#define CONFIG_SYS_PROMPT "K2HK EVM # "
#define CONFIG_SYS_CBSIZE 1024
#define CONFIG_SYS_PBSIZE 2048
diff --git a/include/configs/koelsch.h b/include/configs/koelsch.h
index 90e2d7a..1a93d17 100644
--- a/include/configs/koelsch.h
+++ b/include/configs/koelsch.h
@@ -32,15 +32,9 @@
#define CONFIG_CMD_NFS
#define CONFIG_CMD_BOOTZ
-#if defined(CONFIG_SYS_USE_BOOT_NORFLASH)
-#define CONFIG_CMD_FLASH
-#define CONFIG_SYS_TEXT_BASE 0x00000000
-#else
-/* SPI flash boot is default. */
#define CONFIG_CMD_SF
#define CONFIG_CMD_SPI
#define CONFIG_SYS_TEXT_BASE 0xE6304000
-#endif
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
@@ -109,29 +103,6 @@
#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024)
/* FLASH */
-#if defined(CONFIG_SYS_USE_BOOT_NORFLASH)
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
-#define CONFIG_FLASH_SHOW_PROGRESS 45
-#define CONFIG_SYS_FLASH_BASE 0x00000000
-#define CONFIG_SYS_FLASH_SIZE 0x04000000 /* 64 MB */
-#define CONFIG_SYS_MAX_FLASH_SECT 1024
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_FLASH_BANKS_LIST { (CONFIG_SYS_FLASH_BASE) }
-#define CONFIG_SYS_FLASH_BANKS_SIZES { (CONFIG_SYS_FLASH_SIZE) }
-#define CONFIG_SYS_FLASH_ERASE_TOUT 3000
-#define CONFIG_SYS_FLASH_WRITE_TOUT 3000
-#define CONFIG_SYS_FLASH_LOCK_TOUT 3000
-#define CONFIG_SYS_FLASH_UNLOCK_TOUT 3000
-/* ENV setting */
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + \
- CONFIG_SYS_MONITOR_LEN)
-
-#else /* CONFIG_SYS_USE_BOOT_NORFLASH */
-
#define CONFIG_SYS_NO_FLASH
#define CONFIG_SPI
#define CONFIG_SH_QSPI
@@ -142,8 +113,6 @@
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_ADDR 0xC0000
-#endif /* CONFIG_SYS_USE_BOOT_NORFLASH */
-
/* Common ENV setting */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_ENV_SECT_SIZE (256 * 1024)
@@ -166,8 +135,9 @@
#define CONFIG_SH_ETHER_ALIGNE_SIZE 64
/* Board Clock */
-#define CONFIG_SYS_CLK_FREQ 10000000
-#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
+#define RMOBILE_XTAL_CLK 20000000u
+#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK
+#define CONFIG_SH_TMU_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2)
#define CONFIG_SH_SCIF_CLK_FREQ 14745600
#define CONFIG_SYS_TMU_CLK_DIV 4
diff --git a/include/configs/lager.h b/include/configs/lager.h
index b420e45..ac31128 100644
--- a/include/configs/lager.h
+++ b/include/configs/lager.h
@@ -16,8 +16,6 @@
#define CONFIG_RMOBILE
#define CONFIG_RMOBILE_BOARD_STRING "Lager"
#define CONFIG_SH_GPIO_PFC
-#define MACH_TYPE_LAGER 4538
-#define CONFIG_MACH_TYPE MACH_TYPE_LAGER
#include <asm/arch/rmobile.h>
@@ -35,14 +33,9 @@
#define CONFIG_CMD_NFS
#define CONFIG_CMD_BOOTZ
-#if defined(CONFIG_SYS_USE_BOOT_NORFLASH)
-#define CONFIG_CMD_FLASH
-#define CONFIG_SYS_TEXT_BASE 0x00000000
-#else
#define CONFIG_CMD_SF
#define CONFIG_CMD_SPI
#define CONFIG_SYS_TEXT_BASE 0xE8080000
-#endif
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
@@ -111,31 +104,6 @@
#define CONFIG_SYS_MALLOC_LEN (1 * 1024 * 1024)
#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024)
-#if defined(CONFIG_SYS_USE_BOOT_NORFLASH)
-/* USE NOR FLASH */
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
-#define CONFIG_FLASH_SHOW_PROGRESS 45
-#define CONFIG_SYS_FLASH_BASE 0x00000000
-#define CONFIG_SYS_FLASH_SIZE 0x04000000 /* 64 MB */
-#define CONFIG_SYS_MAX_FLASH_SECT 1024
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_FLASH_BANKS_LIST { (CONFIG_SYS_FLASH_BASE) }
-#define CONFIG_SYS_FLASH_BANKS_SIZES { (CONFIG_SYS_FLASH_SIZE) }
-#define CONFIG_SYS_FLASH_ERASE_TOUT 3000
-#define CONFIG_SYS_FLASH_WRITE_TOUT 3000
-#define CONFIG_SYS_FLASH_LOCK_TOUT 3000
-#define CONFIG_SYS_FLASH_UNLOCK_TOUT 3000
-
-/* ENV setting */
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + \
- CONFIG_SYS_MONITOR_LEN)
-
-#else /* CONFIG_SYS_USE_BOOT_NORFLASH */
-
/* USE SPI */
#define CONFIG_SPI
#define CONFIG_SPI_FLASH_BAR
@@ -147,7 +115,6 @@
/* ENV setting */
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_ADDR 0xC0000
-#endif
/* Common ENV setting */
#define CONFIG_ENV_OVERWRITE
@@ -186,9 +153,10 @@
#define CONFIG_SYS_I2C_POWERIC_ADDR 0x58 /* da9063 */
/* Board Clock */
-#define CONFIG_BASE_CLK_FREQ 20000000u
-#define CONFIG_SH_TMU_CLK_FREQ (CONFIG_BASE_CLK_FREQ / 2) /* EXT / 2 */
-#define CONFIG_PLL1_CLK_FREQ (CONFIG_BASE_CLK_FREQ * 156 / 2)
+#define RMOBILE_XTAL_CLK 20000000u
+#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK
+#define CONFIG_SH_TMU_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2) /* EXT / 2 */
+#define CONFIG_PLL1_CLK_FREQ (CONFIG_SYS_CLK_FREQ * 156 / 2)
#define CONFIG_PLL1_DIV2_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 2)
#define CONFIG_MP_CLK_FREQ (CONFIG_PLL1_DIV2_CLK_FREQ / 15)
#define CONFIG_HP_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 12)
diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
index bb1fa44..3e387c4 100644
--- a/include/configs/m28evk.h
+++ b/include/configs/m28evk.h
@@ -7,7 +7,6 @@
#ifndef __CONFIGS_M28EVK_H__
#define __CONFIGS_M28EVK_H__
-
/* System configurations */
#define CONFIG_MX28 /* i.MX28 SoC */
#define MACH_TYPE_M28EVK 3613
diff --git a/include/configs/mx53ard.h b/include/configs/mx53ard.h
index 797a637..134d680 100644
--- a/include/configs/mx53ard.h
+++ b/include/configs/mx53ard.h
@@ -23,6 +23,8 @@
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG
+#define CONFIG_SYS_GENERIC_BOARD
+
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h
index 3f0d80a..5bbae8c 100644
--- a/include/configs/mx53evk.h
+++ b/include/configs/mx53evk.h
@@ -23,6 +23,8 @@
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG
+#define CONFIG_SYS_GENERIC_BOARD
+
#define CONFIG_OF_LIBFDT
/* Size of malloc() pool */
diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
index 5859f36..12d79b4 100644
--- a/include/configs/mx53loco.h
+++ b/include/configs/mx53loco.h
@@ -22,6 +22,8 @@
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
+#define CONFIG_SYS_GENERIC_BOARD
+
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
diff --git a/include/configs/mx53smd.h b/include/configs/mx53smd.h
index a04e7c7..3da0ef4 100644
--- a/include/configs/mx53smd.h
+++ b/include/configs/mx53smd.h
@@ -23,6 +23,8 @@
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG
+#define CONFIG_SYS_GENERIC_BOARD
+
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h
index 7a2c172..e59a3b4 100644
--- a/include/configs/mx6sabre_common.h
+++ b/include/configs/mx6sabre_common.h
@@ -25,6 +25,8 @@
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG
+#define CONFIG_SYS_GENERIC_BOARD
+
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h
index 5d02d23..0fa6573 100644
--- a/include/configs/mx6sabresd.h
+++ b/include/configs/mx6sabresd.h
@@ -47,6 +47,7 @@
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_IPUV3_CLK 260000000
#define CONFIG_IMX_HDMI
+#define CONFIG_IMX_VIDEO_SKIP
#define CONFIG_CMD_PCI
#ifdef CONFIG_CMD_PCI
diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h
index 1876dbf..3d05a64 100644
--- a/include/configs/mx6slevk.h
+++ b/include/configs/mx6slevk.h
@@ -10,6 +10,7 @@
#define __CONFIG_H
#include <asm/arch/imx-regs.h>
+#include <asm/imx-common/gpio.h>
#include <linux/sizes.h>
#include "mx6_common.h"
@@ -196,4 +197,15 @@
#define CONFIG_CMD_CACHE
#endif
+#define CONFIG_CMD_SF
+#ifdef CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_MXC_SPI
+#define CONFIG_SF_DEFAULT_BUS 0
+#define CONFIG_SF_DEFAULT_CS (0 | (IMX_GPIO_NR(4, 11) << 8))
+#define CONFIG_SF_DEFAULT_SPEED 20000000
+#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
+#endif
+
#endif /* __CONFIG_H */
diff --git a/include/configs/mxs.h b/include/configs/mxs.h
index ba55177..8bce28f 100644
--- a/include/configs/mxs.h
+++ b/include/configs/mxs.h
@@ -40,6 +40,7 @@
/*
* CPU specifics
*/
+#define CONFIG_SYS_GENERIC_BOARD
/* MXS uses FDT */
#define CONFIG_OF_LIBFDT
diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h
index f7e7315..b2b17ce 100644
--- a/include/configs/nitrogen6x.h
+++ b/include/configs/nitrogen6x.h
@@ -24,6 +24,7 @@
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG
+#define CONFIG_SYS_GENERIC_BOARD
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
@@ -141,6 +142,7 @@
#define CONFIG_CMD_HDMIDETECT
#define CONFIG_CONSOLE_MUX
#define CONFIG_IMX_HDMI
+#define CONFIG_IMX_VIDEO_SKIP
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index fae0e6f..d07e52d 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -170,11 +170,17 @@
"if test $beaglerev = C4; then " \
"setenv fdtfile omap3-beagle.dtb; fi; " \
"if test $beaglerev = xMAB; then " \
- "setenv fdtfile omap3-beagle-xm.dtb; fi; " \
+ "setenv fdtfile omap3-beagle-xm-ab.dtb; fi; " \
"if test $beaglerev = xMC; then " \
"setenv fdtfile omap3-beagle-xm.dtb; fi; " \
"if test $fdtfile = undefined; then " \
"echo WARNING: Could not determine device tree to use; fi; \0" \
+ "validatefdt=" \
+ "if test $beaglerev = xMAB; then " \
+ "if test ! -e mmc ${bootpart} ${bootdir}/${fdtfile}; then " \
+ "setenv fdtfile omap3-beagle-xm.dtb; " \
+ "fi; " \
+ "fi; \0" \
"bootenv=uEnv.txt\0" \
"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
"importbootenv=echo Importing environment from mmc ...; " \
@@ -190,7 +196,7 @@
"rootfstype=${ramrootfstype}\0" \
"loadramdisk=load mmc ${bootpart} ${rdaddr} ${bootdir}/${ramdisk}\0" \
"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
- "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
+ "loadfdt=run validatefdt; load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs; " \
"bootm ${loadaddr}\0" \
diff --git a/include/configs/pepper.h b/include/configs/pepper.h
new file mode 100644
index 0000000..cc153ab
--- /dev/null
+++ b/include/configs/pepper.h
@@ -0,0 +1,99 @@
+/*
+ * Copyright (C) 2013 Gumstix, Inc. - http://www.gumstix.com/
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_PEPPER_H
+#define __CONFIG_PEPPER_H
+
+#define CONFIG_MMC
+#include <configs/ti_am335x_common.h>
+
+#undef CONFIG_BOARD_LATE_INIT
+#undef CONFIG_SPL_OS_BOOT
+
+/* Clock defines */
+#define V_OSCK 24000000 /* Clock output from T2 */
+#define V_SCLK (V_OSCK)
+
+#undef CONFIG_SYS_PROMPT
+#define CONFIG_SYS_PROMPT "pepper# "
+
+/* Mach type */
+#define MACH_TYPE_PEPPER 4207 /* Until the next sync */
+#define CONFIG_MACH_TYPE MACH_TYPE_PEPPER
+
+#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
+#define CONFIG_ENV_IS_NOWHERE
+/* Display cpuinfo */
+#define CONFIG_DISPLAY_CPUINFO
+
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ DEFAULT_LINUX_BOOT_ENV \
+ "bootdir=/boot\0" \
+ "bootfile=zImage\0" \
+ "fdtfile=am335x-pepper.dtb\0" \
+ "console=ttyO0,115200n8\0" \
+ "optargs=\0" \
+ "mmcdev=0\0" \
+ "mmcroot=/dev/mmcblk0p2 rw\0" \
+ "mmcrootfstype=ext3 rootwait\0" \
+ "mmcargs=setenv bootargs console=${console} " \
+ "${optargs} " \
+ "root=${mmcroot} " \
+ "rootfstype=${mmcrootfstype}\0" \
+ "bootenv=uEnv.txt\0" \
+ "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
+ "importbootenv=echo Importing environment from mmc ...; " \
+ "env import -t ${loadaddr} ${filesize}\0" \
+ "mmcload=load mmc ${mmcdev}:2 ${loadaddr} ${bootdir}/${bootfile}; " \
+ "load mmc ${mmcdev}:2 ${fdtaddr} ${bootdir}/${fdtfile}\0" \
+ "loaduimage=fatload mmc ${mmcdev}:1 ${loadaddr} uImage\0" \
+ "uimageboot=echo Booting from mmc${mmcdev} ...; " \
+ "run mmcargs; " \
+ "bootm ${loadaddr}\0" \
+ "mmcboot=echo Booting from mmc ...; " \
+ "run mmcargs; " \
+ "bootz ${loadaddr} - ${fdtaddr}\0" \
+ "ubiboot=echo Booting from nand (ubifs) ...; " \
+ "run ubiargs; run ubiload; " \
+ "bootz ${loadaddr} - ${fdtaddr}\0" \
+
+#define CONFIG_BOOTCOMMAND \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
+ "echo SD/MMC found on device ${mmcdev};" \
+ "if run loadbootenv; then " \
+ "echo Loaded environment from ${bootenv};" \
+ "run importbootenv;" \
+ "fi;" \
+ "if test -n $uenvcmd; then " \
+ "echo Running uenvcmd ...;" \
+ "run uenvcmd;" \
+ "fi;" \
+ "if run mmcload; then " \
+ "run mmcboot;" \
+ "fi;" \
+ "if run loaduimage; then " \
+ "run uimageboot;" \
+ "fi;" \
+ "fi;" \
+
+/* Serial console configuration */
+#define CONFIG_CONS_INDEX 1 /* UART0 */
+#define CONFIG_SERIAL1 1
+#define CONFIG_SYS_NS16550_COM1 0x44e09000
+
+/* Ethernet support */
+#define CONFIG_PHY_GIGE
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_ADDR 0
+#define CONFIG_PHY_MICREL
+#define CONFIG_PHY_MICREL_KSZ9021
+#define CONFIG_PHY_RESET_DELAY 1000
+
+/* SPL */
+#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"
+
+#endif /* __CONFIG_PEPPER_H */
diff --git a/include/configs/pxm2.h b/include/configs/pxm2.h
index 6276d43..d75d562 100644
--- a/include/configs/pxm2.h
+++ b/include/configs/pxm2.h
@@ -21,7 +21,7 @@
#include "siemens-am33x-common.h"
#define CONFIG_SYS_MPUCLK 720
-#define DXR2_IOCTRL_VAL 0x18b
+#define DDR_IOCTRL_VAL 0x18b
#define DDR_PLL_FREQ 266
#define BOARD_DFU_BUTTON_GPIO 59
diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h
index 991c43e..799d4fe 100644
--- a/include/configs/s5p_goni.h
+++ b/include/configs/s5p_goni.h
@@ -214,8 +214,8 @@
/*
* I2C Settings
*/
-#define CONFIG_SOFT_I2C_GPIO_SCL s5pc110_gpio_get(j4, 3)
-#define CONFIG_SOFT_I2C_GPIO_SDA s5pc110_gpio_get(j4, 0)
+#define CONFIG_SOFT_I2C_GPIO_SCL S5PC110_GPIO_J43
+#define CONFIG_SOFT_I2C_GPIO_SDA S5PC110_GPIO_J40
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h
index 2da8871..eb046cd 100644
--- a/include/configs/s5pc210_universal.h
+++ b/include/configs/s5pc210_universal.h
@@ -111,12 +111,9 @@
"onenand write 0x41008000 0xc00000 0x500000\0" \
"bootk=" \
"run loaduimage; bootm 0x40007FC0\0" \
- "updatemmc=" \
- "mmc boot 0 1 1 1; mmc write 0 0x42008000 0 0x200;" \
- "mmc boot 0 1 1 0\0" \
"updatebackup=" \
- "mmc boot 0 1 1 2; mmc write 0 0x42100000 0 0x200;" \
- "mmc boot 0 1 1 0\0" \
+ "mmc dev 0 2; mmc write 0 0x42100000 0 0x200;" \
+ "mmc dev 0 0\0" \
"updatebootb=" \
"mmc read 0 0x42100000 0x80 0x200; run updatebackup\0" \
"lpj=lpj=3981312\0" \
@@ -170,8 +167,8 @@
/*
* I2C Settings
*/
-#define CONFIG_SOFT_I2C_GPIO_SCL exynos4_gpio_get(1, b, 7)
-#define CONFIG_SOFT_I2C_GPIO_SDA exynos4_gpio_get(1, b, 6)
+#define CONFIG_SOFT_I2C_GPIO_SCL EXYNOS4_GPIO_B7
+#define CONFIG_SOFT_I2C_GPIO_SDA EXYNOS4_GPIO_B6
#define CONFIG_CMD_I2C
@@ -196,10 +193,10 @@
*/
#define CONFIG_SOFT_SPI
#define CONFIG_SOFT_SPI_MODE SPI_MODE_3
-#define CONFIG_SOFT_SPI_GPIO_SCLK exynos4_gpio_get(2, y3, 1)
-#define CONFIG_SOFT_SPI_GPIO_MOSI exynos4_gpio_get(2, y3, 3)
-#define CONFIG_SOFT_SPI_GPIO_MISO exynos4_gpio_get(2, y3, 0)
-#define CONFIG_SOFT_SPI_GPIO_CS exynos4_gpio_get(2, y4, 3)
+#define CONFIG_SOFT_SPI_GPIO_SCLK EXYNOS4_GPIO_Y31
+#define CONFIG_SOFT_SPI_GPIO_MOSI EXYNOS4_GPIO_Y33
+#define CONFIG_SOFT_SPI_GPIO_MISO EXYNOS4_GPIO_Y30
+#define CONFIG_SOFT_SPI_GPIO_CS EXYNOS4_GPIO_Y43
#define SPI_DELAY udelay(1)
#undef SPI_INIT
@@ -231,8 +228,8 @@ int universal_spi_read(void);
#define KEY_PWR_INTERRUPT_REG MAX8998_REG_IRQ1
#define KEY_PWR_INTERRUPT_MASK (1 << 7)
-#define KEY_VOL_UP_GPIO exynos4_gpio_get(2, x2, 0)
-#define KEY_VOL_DOWN_GPIO exynos4_gpio_get(2, x2, 1)
+#define KEY_VOL_UP_GPIO EXYNOS4_GPIO_X20
+#define KEY_VOL_DOWN_GPIO EXYNOS4_GPIO_X21
#endif /* __ASSEMBLY__ */
/* LCD console */
diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h
index 721c4e6..73a123d 100644
--- a/include/configs/siemens-am33x-common.h
+++ b/include/configs/siemens-am33x-common.h
@@ -358,7 +358,7 @@
#define CONFIG_COMMON_ENV_SETTINGS \
"verify=no \0" \
- "project_dir=systemone\0" \
+ "project_dir=targetdir\0" \
"upgrade_available=0\0" \
"altbootcmd=run bootcmd\0" \
"bootlimit=3\0" \
@@ -402,7 +402,11 @@
"dfu_args=run bootargs_defaults;" \
"setenv bootargs ${bootargs} ;" \
"mtdparts default; " \
- "dfu 0 nand 0; \0" \
+ "led dfu 1;" \
+ "led stat 0;" \
+ "dfu 0 nand 0;" \
+ "led dfu 0;" \
+ "led stat 1;\0" \
"dfu_alt_info=" DFU_ALT_INFO_NAND "\0" \
"net_args=run bootargs_defaults;" \
"mtdparts default;" \
diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h
index 183aae7..66fa179 100644
--- a/include/configs/smdk5250.h
+++ b/include/configs/smdk5250.h
@@ -14,4 +14,8 @@
#undef CONFIG_DEFAULT_DEVICE_TREE
#define CONFIG_DEFAULT_DEVICE_TREE exynos5250-smdk5250
+/* Enable FIT support and comparison */
+#define CONFIG_FIT
+#define CONFIG_FIT_BEST_MATCH
+
#endif /* __CONFIG_SMDK_H */
diff --git a/include/configs/smdk5420.h b/include/configs/smdk5420.h
index b96eea8..58f706a 100644
--- a/include/configs/smdk5420.h
+++ b/include/configs/smdk5420.h
@@ -51,4 +51,8 @@
#define CONFIG_MAX_I2C_NUM 11
+/* Enable FIT support and comparison */
+#define CONFIG_FIT
+#define CONFIG_FIT_BEST_MATCH
+
#endif /* __CONFIG_5420_H */
diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h
index 1388f49..34adfaf 100644
--- a/include/configs/smdkv310.h
+++ b/include/configs/smdkv310.h
@@ -12,6 +12,7 @@
/* High Level Configuration Options */
#define CONFIG_SAMSUNG 1 /* in a SAMSUNG core */
#define CONFIG_S5P 1 /* S5P Family */
+#define CONFIG_EXYNOS4 /* EXYNOS4 Family */
#define CONFIG_EXYNOS4210 1 /* which is a EXYNOS4210 SoC */
#define CONFIG_SMDKV310 1 /* working with SMDKV310*/
diff --git a/include/configs/snow.h b/include/configs/snow.h
index ed5c0b6..673fa14 100644
--- a/include/configs/snow.h
+++ b/include/configs/snow.h
@@ -14,4 +14,8 @@
#undef CONFIG_DEFAULT_DEVICE_TREE
#define CONFIG_DEFAULT_DEVICE_TREE exynos5250-snow
+/* Enable FIT support and comparison */
+#define CONFIG_FIT
+#define CONFIG_FIT_BEST_MATCH
+
#endif /* __CONFIG_SNOW_H */
diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h
index ae786cf..129acf2 100644
--- a/include/configs/tegra-common.h
+++ b/include/configs/tegra-common.h
@@ -48,6 +48,13 @@
#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
/*
+ * Common HW configuration.
+ * If this varies between SoCs later, move to tegraNN-common.h
+ * Note: This is number of devices, not max device ID.
+ */
+#define CONFIG_SYS_MMC_MAX_DEVICE 4
+
+/*
* select serial console configuration
*/
#define CONFIG_CONS_INDEX 1
diff --git a/include/configs/trats.h b/include/configs/trats.h
index c4afecf..90f1962 100644
--- a/include/configs/trats.h
+++ b/include/configs/trats.h
@@ -59,7 +59,7 @@
#define CONFIG_BOOTARGS "Please use defined boot"
#define CONFIG_BOOTCOMMAND "run mmcboot"
-#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
+#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
- GENERATED_GBL_DATA_SIZE)
@@ -121,12 +121,9 @@
"bootm 0x40007FC0 - ${fdtaddr};" \
"fi;" \
"bootm 0x40007FC0;\0" \
- "updatemmc=" \
- "mmc boot 0 1 1 1; mmc write 0 0x42008000 0 0x200;" \
- "mmc boot 0 1 1 0\0" \
"updatebackup=" \
- "mmc boot 0 1 1 2; mmc write 0 0x42100000 0 0x200;" \
- "mmc boot 0 1 1 0\0" \
+ "mmc dev 0 2; mmc write 0 0x42100000 0 0x200;" \
+ "mmc dev 0 0\0" \
"updatebootb=" \
"mmc read 0 0x42100000 0x80 0x200; run updatebackup\0" \
"lpj=lpj=3981312\0" \
@@ -207,8 +204,8 @@
#define CONFIG_SYS_I2C_INIT_BOARD
/* I2C FG */
-#define CONFIG_SOFT_I2C_GPIO_SCL exynos4_gpio_get(2, y4, 1)
-#define CONFIG_SOFT_I2C_GPIO_SDA exynos4_gpio_get(2, y4, 0)
+#define CONFIG_SOFT_I2C_GPIO_SCL EXYNOS4_GPIO_Y41
+#define CONFIG_SOFT_I2C_GPIO_SDA EXYNOS4_GPIO_Y40
/* POWER */
#define CONFIG_POWER
@@ -245,8 +242,8 @@
#define KEY_PWR_INTERRUPT_REG MAX8997_REG_INT1
#define KEY_PWR_INTERRUPT_MASK (1 << 0)
-#define KEY_VOL_UP_GPIO exynos4_gpio_get(2, x2, 0)
-#define KEY_VOL_DOWN_GPIO exynos4_gpio_get(2, x2, 1)
+#define KEY_VOL_UP_GPIO EXYNOS4_GPIO_X20
+#define KEY_VOL_DOWN_GPIO EXYNOS4_GPIO_X21
#endif /* __ASSEMBLY__ */
/* LCD console */
diff --git a/include/configs/trats2.h b/include/configs/trats2.h
index 14def7d..206975b 100644
--- a/include/configs/trats2.h
+++ b/include/configs/trats2.h
@@ -52,7 +52,7 @@
#define CONFIG_BOOTARGS "Please use defined boot"
#define CONFIG_BOOTCOMMAND "run mmcboot"
-#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"
+#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
- GENERATED_GBL_DATA_SIZE)
@@ -111,16 +111,11 @@
"bootm 0x40007FC0 - ${fdtaddr};" \
"fi;" \
"bootm 0x40007FC0;\0" \
- "updatemmc=" \
- "mmc boot 0 1 1 1; mmc write 0x42008000 0 0x200;" \
- "mmc boot 0 1 1 0\0" \
"updatebackup=" \
- "mmc boot 0 1 1 2; mmc write 0x42100000 0 0x200;" \
- " mmc boot 0 1 1 0\0" \
+ "mmc dev 0 2; mmc write 0x51000000 0 0x800;" \
+ " mmc dev 0 0\0" \
"updatebootb=" \
- "mmc read 0x51000000 0x80 0x200; run updatebackup\0" \
- "updateuboot=" \
- "mmc write 0x50000000 0x80 0x400\0" \
+ "mmc read 0x51000000 0x80 0x800; run updatebackup\0" \
"mmcboot=" \
"setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
"${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
@@ -227,8 +222,8 @@ int get_soft_i2c_sda_pin(void);
#define KEY_PWR_INTERRUPT_REG MAX77686_REG_PMIC_INT1
#define KEY_PWR_INTERRUPT_MASK (1 << 1)
-#define KEY_VOL_UP_GPIO exynos4x12_gpio_get(2, x2, 2)
-#define KEY_VOL_DOWN_GPIO exynos4x12_gpio_get(2, x3, 3)
+#define KEY_VOL_UP_GPIO EXYNOS4X12_GPIO_X22
+#define KEY_VOL_DOWN_GPIO EXYNOS4X12_GPIO_X33
#endif /* __ASSEMBLY__ */
/* LCD console */
diff --git a/include/configs/udoo.h b/include/configs/udoo.h
index a0306de..700e9c1 100644
--- a/include/configs/udoo.h
+++ b/include/configs/udoo.h
@@ -26,6 +26,8 @@
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG
+#define CONFIG_SYS_GENERIC_BOARD
+
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (2 * SZ_1M)
diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h
index 6c74c72..7d96908 100644
--- a/include/configs/wandboard.h
+++ b/include/configs/wandboard.h
@@ -26,6 +26,8 @@
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG
+#define CONFIG_SYS_GENERIC_BOARD
+
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
@@ -56,6 +58,12 @@
#define CONFIG_LOADADDR 0x12000000
#define CONFIG_SYS_TEXT_BASE 0x17800000
+/* I2C Configs */
+#define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_SPEED 100000
+
/* MMC Configuration */
#define CONFIG_FSL_ESDHC
#define CONFIG_FSL_USDHC
@@ -98,7 +106,9 @@
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_IPUV3_CLK 260000000
+#define CONFIG_CMD_HDMIDETECT
#define CONFIG_IMX_HDMI
+#define CONFIG_IMX_VIDEO_SKIP
#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
#define CONFIG_DEFAULT_FDT_FILE "imx6dl-wandboard.dtb"
@@ -135,7 +145,33 @@
"fi; " \
"fi\0" \
"mmcargs=setenv bootargs console=${console},${baudrate} " \
- "root=${mmcroot}\0" \
+ "root=${mmcroot}; run videoargs\0" \
+ "videoargs=" \
+ "setenv nextcon 0; " \
+ "if hdmidet; then " \
+ "setenv bootargs ${bootargs} " \
+ "video=mxcfb${nextcon}:dev=hdmi,1280x720M@60," \
+ "if=RGB24; " \
+ "setenv fbmen fbmem=28M; " \
+ "setexpr nextcon ${nextcon} + 1; " \
+ "else " \
+ "echo - no HDMI monitor;" \
+ "fi; " \
+ "i2c dev 1; " \
+ "if i2c probe 0x10; then " \
+ "setenv bootargs ${bootargs} " \
+ "video=mxcfb${nextcon}:dev=lcd,800x480@60," \
+ "if=RGB666; " \
+ "if test 0 -eq ${nextcon}; then " \
+ "setenv fbmem fbmem=10M; " \
+ "else " \
+ "setenv fbmem ${fbmem},10M; " \
+ "fi; " \
+ "setexpr nextcon ${nextcon} + 1; " \
+ "else " \
+ "echo '- no FWBADAPT-7WVGA-LCD-F07A-0102 display';" \
+ "fi; " \
+ "setenv bootargs ${bootargs} ${fbmem}\0" \
"loadbootscript=" \
"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
"bootscript=echo Running bootscript from mmc ...; " \
diff --git a/include/palmas.h b/include/palmas.h
index eaf3670..cca3f9a 100644
--- a/include/palmas.h
+++ b/include/palmas.h
@@ -24,6 +24,10 @@
#define LDO1_CTRL 0x50
#define LDO1_VOLTAGE 0x51
+/* LDO2 control/voltage */
+#define LDO2_CTRL 0x52
+#define LDO2_VOLTAGE 0x53
+
/* LDO9 control/voltage */
#define LDO9_CTRL 0x60
#define LDO9_VOLTAGE 0x61
diff --git a/include/power/ltc3676_pmic.h b/include/power/ltc3676_pmic.h
new file mode 100644
index 0000000..dcaa985
--- /dev/null
+++ b/include/power/ltc3676_pmic.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2014 Gateworks Corporation
+ * Tim Harvey <tharvey@gateworks.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __LTC3676_PMIC_H_
+#define __LTC3676_PMIC_H_
+
+/* LTC3676 registers */
+enum {
+ LTC3676_BUCK1 = 0x01,
+ LTC3676_BUCK2 = 0x02,
+ LTC3676_BUCK3 = 0x03,
+ LTC3676_BUCK4 = 0x04,
+ LTC3676_LDOA = 0x05,
+ LTC3676_LDOB = 0x06,
+ LTC3676_SQD1 = 0x07,
+ LTC3676_SQD2 = 0x08,
+ LTC3676_CNTRL = 0x09,
+ LTC3676_DVB1A = 0x0A,
+ LTC3676_DVB1B = 0x0B,
+ LTC3676_DVB2A = 0x0C,
+ LTC3676_DVB2B = 0x0D,
+ LTC3676_DVB3A = 0x0E,
+ LTC3676_DVB3B = 0x0F,
+ LTC3676_DVB4A = 0x10,
+ LTC3676_DVB4B = 0x11,
+ LTC3676_MSKIRQ = 0x12,
+ LTC3676_MSKPG = 0x13,
+ LTC3676_USER = 0x14,
+ LTC3676_HRST = 0x1E,
+ LTC3676_CLIRQ = 0x1F,
+ LTC3676_IRQSTAT = 0x15,
+ LTC3676_PGSTATL = 0x16,
+ LTC3676_PGSTATR = 0x17,
+ LTC3676_NUM_OF_REGS = 0x20,
+};
+
+/*
+ * SW Configuration
+ */
+
+#define LTC3676_DVB_MASK 0x1f
+#define LTC3676_PGOOD_MASK (1<<5)
+#define LTC3676_REF_SELA (0<<5)
+#define LTC3676_REF_SELB (1<<5)
+
+int power_ltc3676_init(unsigned char bus);
+#endif
diff --git a/include/power/pfuze100_pmic.h b/include/power/pfuze100_pmic.h
index 2a9032a..444aba6 100644
--- a/include/power/pfuze100_pmic.h
+++ b/include/power/pfuze100_pmic.h
@@ -93,4 +93,5 @@ enum {
#define SWBST_MODE_AUTO (2 << 2)
#define SWBST_MODE_APS (2 << 3)
+int power_pfuze100_init(unsigned char bus);
#endif
diff --git a/include/samsung/misc.h b/include/samsung/misc.h
index ede6c15..10653a1 100644
--- a/include/samsung/misc.h
+++ b/include/samsung/misc.h
@@ -15,6 +15,8 @@ enum {
BOOT_MODE_THOR,
BOOT_MODE_UMS,
BOOT_MODE_DFU,
+ BOOT_MODE_GPT,
+ BOOT_MODE_ENV,
BOOT_MODE_EXIT,
};