summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--board/linkstation/Makefile8
-rw-r--r--board/linkstation/avr.c280
-rw-r--r--board/linkstation/hwctl.c133
-rw-r--r--board/linkstation/ide.c85
-rw-r--r--board/linkstation/linkstation.c124
-rw-r--r--boards.cfg1
-rw-r--r--drivers/mtd/onenand/onenand_base.c8
-rw-r--r--include/configs/linkstation.h504
8 files changed, 7 insertions, 1136 deletions
diff --git a/board/linkstation/Makefile b/board/linkstation/Makefile
deleted file mode 100644
index 3eeba7d..0000000
--- a/board/linkstation/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y = linkstation.o ide.o hwctl.o avr.o
diff --git a/board/linkstation/avr.c b/board/linkstation/avr.c
deleted file mode 100644
index 62e586b..0000000
--- a/board/linkstation/avr.c
+++ /dev/null
@@ -1,280 +0,0 @@
-/*
- * avr.c
- *
- * AVR functions
- *
- * Copyright (C) 2006 Mihai Georgian <u-boot@linuxnotincluded.org.uk>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-#include <common.h>
-#include <ns16550.h>
-#include <stdio_dev.h>
-
-/* Button codes from the AVR */
-#define PWRR 0x20 /* Power button release */
-#define PWRP 0x21 /* Power button push */
-#define RESR 0x22 /* Reset button release */
-#define RESP 0x23 /* Reset button push */
-#define AVRINIT 0x33 /* Init complete */
-#define AVRRESET 0x31 /* Reset request */
-
-/* LED commands */
-#define PWRBLINKSTRT '[' /* Blink power LED */
-#define PWRBLINKSTOP 'Z' /* Solid power LED */
-#define HDDLEDON 'W' /* HDD LED on */
-#define HDDLEDOFF 'V' /* HDD LED off */
-#define HDDBLINKSTRT 'Y' /* HDD LED start blink */
-#define HDDBLINKSTOP 'X' /* HDD LED stop blink */
-
-/* Timings for LEDs blinking to show choice */
-#define PULSETIME 250 /* msecs */
-#define LONGPAUSE (5 * PULSETIME)
-
-/* Button press times */
-#define PUSHHOLD 1000 /* msecs */
-#define NOBUTTON (6 * (LONGPAUSE+PULSETIME))
-
-/* Boot and console choices */
-#define MAX_BOOT_CHOICE 3
-
-static char *consoles[] = {
- "serial",
-#if defined(CONFIG_NETCONSOLE)
- "nc",
-#endif
-};
-#define MAX_CONS_CHOICE (sizeof(consoles)/sizeof(char *))
-
-#if !defined(CONFIG_NETCONSOLE)
-#define DEF_CONS_CHOICE 0
-#else
-#define DEF_CONS_CHOICE 1
-#endif
-
-#define perror(fmt, args...) printf("%s: " fmt, __FUNCTION__ , ##args)
-
-extern void miconCntl_SendCmd(unsigned char dat);
-extern void miconCntl_DisWDT(void);
-
-static int boot_stop;
-
-static int boot_choice = 1;
-static int cons_choice = DEF_CONS_CHOICE;
-
-static char envbuffer[16];
-
-void init_AVR_DUART (void)
-{
- NS16550_t AVR_port = (NS16550_t) CONFIG_SYS_NS16550_COM2;
- int clock_divisor = CONFIG_SYS_NS16550_CLK / 16 / 9600;
-
- /*
- * AVR port init sequence taken from
- * the original Linkstation init code
- * Normal U-Boot serial reinit doesn't
- * work because the AVR uses even parity
- */
- AVR_port->lcr = 0x00;
- AVR_port->ier = 0x00;
- AVR_port->lcr = UART_LCR_BKSE;
- AVR_port->dll = clock_divisor & 0xff;
- AVR_port->dlm = (clock_divisor >> 8) & 0xff;
- AVR_port->lcr = UART_LCR_WLS_8 | UART_LCR_PEN | UART_LCR_EPS;
- AVR_port->mcr = 0x00;
- AVR_port->fcr = UART_FCR_FIFO_EN | UART_FCR_RXSR | UART_FCR_TXSR;
-
- miconCntl_DisWDT();
-
- boot_stop = 0;
- miconCntl_SendCmd(PWRBLINKSTRT);
-}
-
-static inline int avr_tstc(void)
-{
- return (NS16550_tstc((NS16550_t)CONFIG_SYS_NS16550_COM2));
-}
-
-static inline char avr_getc(void)
-{
- return (NS16550_getc((NS16550_t)CONFIG_SYS_NS16550_COM2));
-}
-
-static int push_timeout(char button_code)
-{
- ulong push_start = get_timer(0);
- while (get_timer(push_start) <= PUSHHOLD)
- if (avr_tstc() && avr_getc() == button_code)
- return 0;
- return 1;
-}
-
-static void next_boot_choice(void)
-{
- ulong return_start;
- ulong pulse_start;
- int on_times;
- int button_on;
- int led_state;
- char c;
-
- button_on = 0;
- return_start = get_timer(0);
-
- on_times = boot_choice;
- led_state = 0;
- miconCntl_SendCmd(HDDLEDOFF);
- pulse_start = get_timer(0);
-
- while (get_timer(return_start) <= NOBUTTON || button_on) {
- if (avr_tstc()) {
- c = avr_getc();
- if (c == PWRP)
- button_on = 1;
- else if (c == PWRR) {
- button_on = 0;
- return_start = get_timer(0);
- if (++boot_choice > MAX_BOOT_CHOICE)
- boot_choice = 1;
- sprintf(envbuffer, "bootcmd%d", boot_choice);
- if (getenv(envbuffer)) {
- sprintf(envbuffer, "run bootcmd%d", boot_choice);
- setenv("bootcmd", envbuffer);
- }
- on_times = boot_choice;
- led_state = 1;
- miconCntl_SendCmd(HDDLEDON);
- pulse_start = get_timer(0);
- } else {
- perror("Unexpected code: 0x%02X\n", c);
- }
- }
- if (on_times && get_timer(pulse_start) > PULSETIME) {
- if (led_state == 1) {
- --on_times;
- led_state = 0;
- miconCntl_SendCmd(HDDLEDOFF);
- } else {
- led_state = 1;
- miconCntl_SendCmd(HDDLEDON);
- }
- pulse_start = get_timer(0);
- }
- if (!on_times && get_timer(pulse_start) > LONGPAUSE) {
- on_times = boot_choice;
- led_state = 1;
- miconCntl_SendCmd(HDDLEDON);
- pulse_start = get_timer(0);
- }
- }
- if (led_state)
- miconCntl_SendCmd(HDDLEDOFF);
-}
-
-void next_cons_choice(int console)
-{
- ulong return_start;
- ulong pulse_start;
- int on_times;
- int button_on;
- int led_state;
- char c;
-
- button_on = 0;
- cons_choice = console;
- return_start = get_timer(0);
-
- on_times = cons_choice+1;
- led_state = 1;
- miconCntl_SendCmd(HDDLEDON);
- pulse_start = get_timer(0);
-
- while (get_timer(return_start) <= NOBUTTON || button_on) {
- if (avr_tstc()) {
- c = avr_getc();
- if (c == RESP)
- button_on = 1;
- else if (c == RESR) {
- button_on = 0;
- return_start = get_timer(0);
- cons_choice = (cons_choice + 1) % MAX_CONS_CHOICE;
- console_assign(stdin, consoles[cons_choice]);
- console_assign(stdout, consoles[cons_choice]);
- console_assign(stderr, consoles[cons_choice]);
- on_times = cons_choice+1;
- led_state = 0;
- miconCntl_SendCmd(HDDLEDOFF);
- pulse_start = get_timer(0);
- } else {
- perror("Unexpected code: 0x%02X\n", c);
- }
- }
- if (on_times && get_timer(pulse_start) > PULSETIME) {
- if (led_state == 0) {
- --on_times;
- led_state = 1;
- miconCntl_SendCmd(HDDLEDON);
- } else {
- led_state = 0;
- miconCntl_SendCmd(HDDLEDOFF);
- }
- pulse_start = get_timer(0);
- }
- if (!on_times && get_timer(pulse_start) > LONGPAUSE) {
- on_times = cons_choice+1;
- led_state = 0;
- miconCntl_SendCmd(HDDLEDOFF);
- pulse_start = get_timer(0);
- }
- }
- if (led_state);
- miconCntl_SendCmd(HDDLEDOFF);
-}
-
-int avr_input(void)
-{
- char avr_button;
-
- if (!avr_tstc())
- return 0;
-
- avr_button = avr_getc();
- switch (avr_button) {
- case PWRP:
- if (push_timeout(PWRR)) {
- /* Timeout before power button release */
- boot_stop = ~boot_stop;
- if (boot_stop)
- miconCntl_SendCmd(PWRBLINKSTOP);
- else
- miconCntl_SendCmd(PWRBLINKSTRT);
- /* Wait for power button release */
- while (avr_getc() != PWRR)
- ;
- } else
- /* Power button released */
- next_boot_choice();
- break;
- case RESP:
- /* Wait for Reset button release */
- while (avr_getc() != RESR)
- ;
- next_cons_choice(cons_choice);
- break;
- case AVRINIT:
- return 0;
- default:
- perror("Unexpected code: 0x%02X\n", avr_button);
- return 0;
- }
- if (boot_stop)
- return (-3);
- else
- return (-2);
-}
-
-void avr_StopBoot(void)
-{
- boot_stop = ~0;
- miconCntl_SendCmd(PWRBLINKSTOP);
-}
diff --git a/board/linkstation/hwctl.c b/board/linkstation/hwctl.c
deleted file mode 100644
index d2090be..0000000
--- a/board/linkstation/hwctl.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * hwctl.c
- *
- * LinkStation HW Control Driver
- *
- * Copyright (C) 2001-2004 BUFFALO INC.
- *
- * This software may be used and distributed according to the terms of
- * the GNU General Public License (GPL), incorporated herein by reference.
- * Drivers based on or derived from this code fall under the GPL and must
- * retain the authorship, copyright and license notice. This file is not
- * a complete program and may only be used when the entire operating
- * system is licensed under the GPL.
- *
- */
-
-#include <config.h>
-#include <common.h>
-#include <command.h>
-#include <asm/io.h>
-
-#define AVR_PORT CONFIG_SYS_NS16550_COM2
-
-/* 2005.5.10 BUFFALO add */
-/*--------------------------------------------------------------*/
-static inline void miconCntl_SendUart(unsigned char dat)
-{
- out_8((unsigned char *)AVR_PORT, dat);
- mdelay(1);
-}
-
-/*--------------------------------------------------------------*/
-void miconCntl_SendCmd(unsigned char dat)
-{
- int i;
-
- for (i=0; i<4; i++){
- miconCntl_SendUart(dat);
- }
-}
-
-/*--------------------------------------------------------------*/
-void miconCntl_FanLow(void)
-{
-#ifdef CONFIG_HTGL
- miconCntl_SendCmd(0x5C);
-#endif
-}
-
-/*--------------------------------------------------------------*/
-void miconCntl_FanHigh(void)
-{
-#ifdef CONFIG_HTGL
- miconCntl_SendCmd(0x5D);
-#endif
-}
-
-/*--------------------------------------------------------------*/
-/* 1000Mbps */
-void miconCntl_Eth1000M(int up)
-{
-#ifdef CONFIG_HTGL
- if (up)
- miconCntl_SendCmd(0x93);
- else
- miconCntl_SendCmd(0x92);
-#else
- if (up)
- miconCntl_SendCmd(0x5D);
- else
- miconCntl_SendCmd(0x5C);
-#endif
-}
-
-/*--------------------------------------------------------------*/
-/* 100Mbps */
-void miconCntl_Eth100M(int up)
-{
-#ifdef CONFIG_HTGL
- if (up)
- miconCntl_SendCmd(0x91);
- else
- miconCntl_SendCmd(0x90);
-#else
- if (up)
- miconCntl_SendCmd(0x5C);
-#endif
-}
-
-/*--------------------------------------------------------------*/
-/* 10Mbps */
-void miconCntl_Eth10M(int up)
-{
-#ifdef CONFIG_HTGL
- if (up)
- miconCntl_SendCmd(0x8F);
- else
- miconCntl_SendCmd(0x8E);
-#else
- if (up)
- miconCntl_SendCmd(0x5C);
-#endif
-}
-
-/*--------------------------------------------------------------*/
-/* */
-void miconCntl_5f(void)
-{
- miconCntl_SendCmd(0x5F);
- mdelay(100);
-}
-
-/*--------------------------------------------------------------*/
-/* "reboot start" signal */
-void miconCntl_Reboot(void)
-{
- miconCntl_SendCmd(0x43);
-}
-
-/*--------------------------------------------------------------*/
-/* Disable watchdog timer */
-void miconCntl_DisWDT(void)
-{
- miconCntl_SendCmd(0x41); /* A */
- miconCntl_SendCmd(0x46); /* F */
- miconCntl_SendCmd(0x4A); /* J */
- miconCntl_SendCmd(0x3E); /* > */
- miconCntl_SendCmd(0x56); /* V */
- miconCntl_SendCmd(0x3E); /* > */
- miconCntl_SendCmd(0x5A); /* Z */
- miconCntl_SendCmd(0x56); /* V */
- miconCntl_SendCmd(0x4B); /* K */
-}
diff --git a/board/linkstation/ide.c b/board/linkstation/ide.c
deleted file mode 100644
index 7b3fe65..0000000
--- a/board/linkstation/ide.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-/* ide.c - ide support functions */
-
-
-#include <common.h>
-
-#ifdef CONFIG_CMD_IDE
-#include <ata.h>
-#include <ide.h>
-#include <pci.h>
-
-#define IT8212_PCI_CpuCONTROL 0x5e
-#define IT8212_PCI_PciModeCONTROL 0x50
-#define IT8212_PCI_IdeIoCONFIG 0x40
-#define IT8212_PCI_IdeBusSkewCONTROL 0x4c
-#define IT8212_PCI_IdeDrivingCURRENT 0x42
-
-extern struct pci_controller hose;
-
-int ide_preinit (void)
-{
- int status;
- pci_dev_t devbusfn;
- int l;
-
- status = 1;
- for (l = 0; l < CONFIG_SYS_IDE_MAXBUS; l++) {
- ide_bus_offset[l] = -ATA_STATUS;
- }
- devbusfn = pci_find_device(PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_680, 0);
- if (devbusfn == -1)
- devbusfn = pci_find_device(PCI_VENDOR_ID_ITE,PCI_DEVICE_ID_ITE_8212,0);
- if (devbusfn != -1) {
- u32 ide_bus_offset32;
-
- status = 0;
-
- pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_0,
- &ide_bus_offset32);
- ide_bus_offset[0] = ide_bus_offset32 & 0xfffffffe;
- ide_bus_offset[0] = pci_hose_bus_to_phys(&hose,
- ide_bus_offset[0] & 0xfffffffe,
- PCI_REGION_IO);
- if (CONFIG_SYS_IDE_MAXBUS > 1) {
- pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_2,
- (u32 *) &ide_bus_offset[1]);
- ide_bus_offset[1] &= 0xfffffffe;
- ide_bus_offset[1] = pci_hose_bus_to_phys(&hose,
- ide_bus_offset[1] & 0xfffffffe,
- PCI_REGION_IO);
- }
- }
-
- if (pci_find_device (PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8212, 0) != -1) {
- pci_write_config_byte(devbusfn, IT8212_PCI_CpuCONTROL, 0x01);
- pci_write_config_byte(devbusfn, IT8212_PCI_PciModeCONTROL, 0x00);
- pci_write_config_word(devbusfn, PCI_COMMAND, 0x0047);
-#ifdef CONFIG_IT8212_SECONDARY_ENABLE
- pci_write_config_word(devbusfn, IT8212_PCI_IdeIoCONFIG, 0xA0F3);
-#else
- pci_write_config_word(devbusfn, IT8212_PCI_IdeIoCONFIG, 0x8031);
-#endif
- pci_write_config_dword(devbusfn, IT8212_PCI_IdeBusSkewCONTROL, 0x02040204);
-/* __LS_COMMENT__ BUFFALO changed 2004.11.10 changed for EMI */
- pci_write_config_byte(devbusfn, IT8212_PCI_IdeDrivingCURRENT, 0x36); /* 10mA */
-/* pci_write_config_byte(dev, IT8212_PCI_IdeDrivingCURRENT, 0x09); */ /* 4mA */
-/* pci_write_config_byte(dev, IT8212_PCI_IdeDrivingCURRENT, 0x12); */ /* 6mA */
-/* pci_write_config_byte(dev, IT8212_PCI_IdeDrivingCURRENT, 0x24); */ /* 6mA,2mA */
-/* pci_write_config_byte(dev, IT8212_PCI_IdeDrivingCURRENT, 0x2D); */ /* 8mA,4mA */
- pci_write_config_byte(devbusfn, PCI_LATENCY_TIMER, 0x00);
- }
-
- return (status);
-}
-
-void ide_set_reset (int flag) {
- return;
-}
-
-#endif /* CONFIG_CMD_IDE */
diff --git a/board/linkstation/linkstation.c b/board/linkstation/linkstation.c
deleted file mode 100644
index 75cda86..0000000
--- a/board/linkstation/linkstation.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * linkstation.c
- *
- * Misc LinkStation specific functions
- *
- * Copyright (C) 2006 Mihai Georgian <u-boot@linuxnotincluded.org.uk>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <version.h>
-#include <mpc824x.h>
-#include <asm/io.h>
-#include <ns16550.h>
-#include <netdev.h>
-
-#ifdef CONFIG_PCI
-#include <pci.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern void init_AVR_DUART(void);
-
-int checkboard (void)
-{
- char *p;
- bd_t *bd = gd->bd;
-
- init_AVR_DUART();
-
- if ((p = getenv ("console_nr")) != NULL) {
- unsigned long con_nr = simple_strtoul (p, NULL, 10) & 3;
-
- bd->bi_baudrate &= ~3;
- bd->bi_baudrate |= con_nr & 3;
- }
- return 0;
-}
-
-phys_size_t initdram (int board_type)
-{
- return (get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM_SIZE));
-}
-
-/*
- * Initialize PCI Devices
- */
-#ifdef CONFIG_PCI
-
-#ifndef CONFIG_PCI_PNP
-
-static struct pci_config_table pci_linkstation_config_table[] = {
- /* vendor, device, class */
- /* bus, dev, func */
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- PCI_ANY_ID, 0x0b, 0, /* AN983B or RTL8110S */
- /* ethernet controller */
- pci_cfgfunc_config_device, { PCI_ETH_IOADDR,
- PCI_ETH_MEMADDR,
- PCI_COMMAND_IO |
- PCI_COMMAND_MEMORY |
- PCI_COMMAND_MASTER }},
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- PCI_ANY_ID, 0x0c, 0, /* SII680 or IT8211AF */
- /* ide controller */
- pci_cfgfunc_config_device, { PCI_IDE_IOADDR,
- PCI_IDE_MEMADDR,
- PCI_COMMAND_IO |
- PCI_COMMAND_MEMORY |
- PCI_COMMAND_MASTER }},
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- PCI_ANY_ID, 0x0e, 0, /* D720101 USB controller, 1st USB 1.1 */
- pci_cfgfunc_config_device, { PCI_USB0_IOADDR,
- PCI_USB0_MEMADDR,
- PCI_COMMAND_MEMORY |
- PCI_COMMAND_MASTER }},
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- PCI_ANY_ID, 0x0e, 1, /* D720101 USB controller, 2nd USB 1.1 */
- pci_cfgfunc_config_device, { PCI_USB1_IOADDR,
- PCI_USB1_MEMADDR,
- PCI_COMMAND_MEMORY |
- PCI_COMMAND_MASTER }},
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- PCI_ANY_ID, 0x0e, 2, /* D720101 USB controller, USB 2.0 */
- pci_cfgfunc_config_device, { PCI_USB2_IOADDR,
- PCI_USB2_MEMADDR,
- PCI_COMMAND_MEMORY |
- PCI_COMMAND_MASTER }},
- { }
-};
-#endif
-
-struct pci_controller hose = {
-#ifndef CONFIG_PCI_PNP
- config_table:pci_linkstation_config_table,
-#endif
-};
-
-void pci_init_board (void)
-{
- pci_mpc824x_init (&hose);
-
- /* Reset USB 1.1 */
- /* Haven't seen any change without these on a HG, maybe it is
- * needed on other models */
- out_le32((volatile unsigned*)(PCI_USB0_MEMADDR + 8), 1);
- out_le32((volatile unsigned*)(PCI_USB1_MEMADDR + 8), 1);
-}
-#endif /* CONFIG_PCI */
-
-#define UART_DCR 0x80004511
-int board_early_init_f (void)
-{
- /* set DUART mode */
- out_8((volatile u8*)UART_DCR, 1);
- return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
- return pci_eth_init(bis);
-}
diff --git a/boards.cfg b/boards.cfg
index 5d81e9f..18faf09 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -636,7 +636,6 @@ Active powerpc mpc824x - - cpc45
Active powerpc mpc824x - - cu824 CU824 - Wolfgang Denk <wd@denx.de>
Active powerpc mpc824x - - eXalion eXalion - Torsten Demke <torsten.demke@fci.com>
Active powerpc mpc824x - - hidden_dragon HIDDEN_DRAGON - Yusdi Santoso <yusdi_santoso@adaptec.com>
-Active powerpc mpc824x - - linkstation linkstation_HGLAN linkstation:HGLAN=1 Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Active powerpc mpc824x - - musenki MUSENKI - Jim Thompson <jim@musenki.com>
Active powerpc mpc824x - - mvblue MVBLUE - -
Active powerpc mpc824x - - sandpoint Sandpoint8240 - Wolfgang Denk <wd@denx.de>
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index 979e4af..e33e8d3 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -91,7 +91,13 @@ static struct nand_ecclayout onenand_oob_32 = {
.oobfree = { {2, 3}, {14, 2}, {18, 3}, {30, 2} }
};
-static const unsigned char ffchars[] = {
+/*
+ * Warning! This array is used with the memcpy_16() function, thus
+ * it must be aligned to 2 bytes. GCC can make this array unaligned
+ * as the array is made of unsigned char, which memcpy16() doesn't
+ * like and will cause unaligned access.
+ */
+static const unsigned char __aligned(2) ffchars[] = {
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 16 */
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
diff --git a/include/configs/linkstation.h b/include/configs/linkstation.h
deleted file mode 100644
index fcd809d..0000000
--- a/include/configs/linkstation.h
+++ /dev/null
@@ -1,504 +0,0 @@
-/*
- * Copyright (C) 2006 Mihai Georgian <u-boot@linuxnotincluded.org.uk>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * Valid values for CONFIG_SYS_TEXT_BASE are:
- *
- * Standard configuration - all models
- * 0xFFF00000 boot from flash
- *
- * Test configuration (boot from RAM using uloader.o)
- * LinkStation HD-HLAN and KuroBox Standard
- * 0x03F00000 boot from RAM
- * LinkStation HD-HGLAN and KuroBox HG
- * 0x07F00000 boot from RAM
- */
-#ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE 0xFFF00000
-#endif
-
-#if 0
-#define DEBUG
-#endif
-
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
-
-/*-----------------------------------------------------------------------
- * User configurable settings:
- * Mandatory settings:
- * CONFIG_IPADDR_LS - the IP address of the LinkStation
- * CONFIG_SERVERIP_LS - the address of the server for NFS/TFTP/DHCP/BOOTP
- * Optional settins:
- * CONFIG_NCIP_LS - the adress of the computer running net console
- * if not configured, it will be set to
- * CONFIG_SERVERIP_LS
- */
-
-
-#define CONFIG_IPADDR_LS 192.168.11.150
-#define CONFIG_SERVERIP_LS 192.168.11.149
-
-#if !defined(CONFIG_IPADDR_LS) || !defined(CONFIG_SERVERIP_LS)
-#error Both CONFIG_IPADDR_LS and CONFIG_SERVERIP_LS must be defined
-#endif
-
-#if !defined(CONFIG_NCIP_LS)
-#define CONFIG_NCIP_LS CONFIG_SERVERIP_LS
-#endif
-
-/*----------------------------------------------------------------------
- * DO NOT CHANGE ANYTHING BELOW, UNLESS YOU KNOW WHAT YOU ARE DOING
- *---------------------------------------------------------------------*/
-
-#define CONFIG_MPC8245 1
-#define CONFIG_LINKSTATION 1
-
-/*---------------------------------------
- * Supported models
- *
- * LinkStation HDLAN /KuroBox Standard (CONFIG_HLAN)
- * LinkStation old model (CONFIG_LAN) - totally untested
- * LinkStation HGLAN / KuroBox HG (CONFIG_HGLAN)
- *
- * Models not supported yet
- * TeraStatin (CONFIG_HTGL)
- */
-
-#if defined(CONFIG_HLAN) || defined(CONFIG_LAN)
-#define CONFIG_IDENT_STRING " LinkStation / KuroBox"
-#elif defined(CONFIG_HGLAN)
-#define CONFIG_IDENT_STRING " LinkStation HG / KuroBox HG"
-#elif defined(CONFIG_HTGL)
-#define CONFIG_IDENT_STRING " TeraStation"
-#else
-#error No LinkStation model defined
-#endif
-
-#define CONFIG_BOOTDELAY 5
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-#undef CONFIG_BOOT_RETRY_TIME
-
-#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT \
- "Boot in %02d seconds ('s' to stop)...", bootdelay
-#define CONFIG_AUTOBOOT_STOP_STR "s"
-
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_EXT2
-
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_NISDOMAIN
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_DNS
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_BOOTP_NTPSERVER
-#define CONFIG_BOOTP_TIMEOFFSET
-
-#define CONFIG_OF_LIBFDT 1
-
-#define OF_STDOUT_PATH "/soc10x/serial@80004600"
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <config_cmd_default.h>
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS 16 /* Max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* Default load address: 8 MB */
-
-#define CONFIG_BOOTCOMMAND "run bootcmd1"
-#define CONFIG_BOOTARGS "root=/dev/sda1 console=ttyS1,57600 netconsole=@192.168.1.7/eth0,@192.168.1.1/00:50:BF:A4:59:71 rtc-rs5c372.probe=0,0x32 debug"
-#define CONFIG_NFSBOOTCOMMAND "bootp;run nfsargs;bootm"
-
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-
-#if defined(CONFIG_HLAN) || defined(CONFIG_LAN)
-#define UBFILE "share/u-boot/u-boot-hd.flash.bin"
-#elif defined(CONFIG_HGLAN)
-#define UBFILE "share/u-boot/u-boot-hg.flash.bin"
-#elif defined(CONFIG_HTGL)
-#define UBFILE "share/u-boot/u-boot-ht.flash.bin"
-#else
-#error No LinkStation model defined
-#endif
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "autoload=no\0" \
- "stdin=nc\0" \
- "stdout=nc\0" \
- "stderr=nc\0" \
- "ipaddr="__stringify(CONFIG_IPADDR_LS)"\0" \
- "netmask=255.255.255.0\0" \
- "serverip="__stringify(CONFIG_SERVERIP_LS)"\0" \
- "ncip="__stringify(CONFIG_NCIP_LS)"\0" \
- "netretry=no\0" \
- "nc=setenv stdin nc;setenv stdout nc;setenv stderr nc\0" \
- "ser=setenv stdin serial;setenv stdout serial;setenv stderr serial\0" \
- "ldaddr=800000\0" \
- "hdpart=0:1\0" \
- "hdfile=boot/uImage\0" \
- "hdload=echo Loading ${hdpart}:${hdfile};ext2load ide ${hdpart} ${ldaddr} ${hdfile};ext2load ide ${hdpart} 7f0000 boot/kuroboxHG.dtb\0" \
- "boothd=setenv bootargs " CONFIG_BOOTARGS ";bootm ${ldaddr} - 7f0000\0" \
- "hdboot=run hdload;run boothd\0" \
- "flboot=setenv bootargs root=/dev/hda1;bootm ffc00000\0" \
- "emboot=setenv bootargs root=/dev/ram0;bootm ffc00000\0" \
- "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off\0" \
- "bootretry=30\0" \
- "bootcmd1=run hdboot;run flboot\0" \
- "bootcmd2=run flboot\0" \
- "bootcmd3=run emboot\0" \
- "writeng=protect off fff70000 fff7ffff;era fff70000 fff7ffff;mw.l 800000 4e474e47 1;cp.b 800000 fff70000 4\0" \
- "writeok=protect off fff70000 fff7ffff;era fff70000 fff7ffff;mw.l 800000 4f4b4f4b 1;cp.b 800000 fff70000 4\0" \
- "ubpart=0:3\0" \
- "ubfile="UBFILE"\0" \
- "ubload=echo Loading ${ubpart}:${ubfile};ext2load ide ${ubpart} ${ldaddr} ${ubfile}\0" \
- "ubsaddr=fff00000\0" \
- "ubeaddr=fff2ffff\0" \
- "ubflash=protect off ${ubsaddr} ${ubeaddr};era ${ubsaddr} ${ubeaddr};cp.b ${ldaddr} ${ubsaddr} ${filesize};cmp.b ${ldaddr} ${ubsaddr} ${filesize}\0" \
- "upgrade=run ubload ubflash\0"
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- */
-#define CONFIG_PCI
-#define CONFIG_PCI_INDIRECT_BRIDGE
-/* Verified: CONFIG_PCI_PNP doesn't work */
-#undef CONFIG_PCI_PNP
-#define CONFIG_PCI_SCAN_SHOW
-
-#ifndef CONFIG_PCI_PNP
-/* Keep the following defines in sync with the BAT mappings */
-
-#define PCI_ETH_IOADDR 0xbfff00
-#define PCI_ETH_MEMADDR 0xbffffc00
-#define PCI_IDE_IOADDR 0xbffed0
-#define PCI_IDE_MEMADDR 0xbffffb00
-#define PCI_USB0_IOADDR 0
-#define PCI_USB0_MEMADDR 0xbfffe000
-#define PCI_USB1_IOADDR 0
-#define PCI_USB1_MEMADDR 0xbfffd000
-#define PCI_USB2_IOADDR 0
-#define PCI_USB2_MEMADDR 0xbfffcf00
-
-#endif
-
-/*-----------------------------------------------------------------------
- * Ethernet stuff
- */
-
-#if defined(CONFIG_LAN) || defined(CONFIG_HLAN)
-#define CONFIG_TULIP
-#define CONFIG_TULIP_USE_IO
-#elif defined(CONFIG_HGLAN) || defined(CONFIG_HTGL)
-#define CONFIG_RTL8169
-#endif
-
-#define CONFIG_NET_RETRY_COUNT 5
-
-#define CONFIG_NETCONSOLE
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-
-#define CONFIG_SYS_FLASH_BASE 0xFFC00000
-#define CONFIG_SYS_FLASH_SIZE 0x00400000
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-
-#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100
-#define CONFIG_SYS_EUMB_ADDR 0x80000000
-#define CONFIG_SYS_PCI_MEM_ADDR 0xB0000000
-#define CONFIG_SYS_MISC_REGION_ADDR 0xFE000000
-
-#define CONFIG_SYS_MONITOR_LEN 0x00040000 /* 256 kB */
-#define CONFIG_SYS_MALLOC_LEN (512 << 10) /* Reserve some kB for malloc() */
-
-#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x00800000 /* 1M ... 8M in DRAM */
-
-/* Maximum amount of RAM */
-#if defined(CONFIG_HLAN) || defined(CONFIG_LAN)
-#define CONFIG_SYS_MAX_RAM_SIZE 0x04000000 /* 64MB of SDRAM */
-#elif defined(CONFIG_HGLAN) || defined(CONFIG_HTGL)
-#define CONFIG_SYS_MAX_RAM_SIZE 0x08000000 /* 128MB of SDRAM */
-#else
-#error Unknown LinkStation type
-#endif
-
-/*-----------------------------------------------------------------------
- * Change CONFIG_SYS_TEXT_BASE in bord/linkstation/config.mk to get a RAM build
- *
- * RAM based builds are for testing purposes. A Linux module, uloader.o,
- * exists to load U-Boot and pass control to it
- *
- * Always do "make clean" after changing the build type
- */
-#if CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_RAMBOOT
-#endif
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area
- */
-#if 1 /* RAM is available when the first C function is called */
-#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_MAX_RAM_SIZE - 0x1000)
-#else
-#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
-#endif
-#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-
-/*----------------------------------------------------------------------
- * Serial configuration
- */
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 57600
-
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-
-#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
-
-#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_EUMB_ADDR + 0x4600) /* Console port */
-#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_EUMB_ADDR + 0x4500) /* AVR port */
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- * For the detail description refer to the MPC8245 user's manual.
- *
- * Unless indicated otherwise, the values are
- * taken from the orignal Linkstation boot code
- *
- * Most of the low level configuration setttings are normally used
- * in arch/powerpc/cpu/mpc824x/cpu_init.c which is NOT used by this implementation.
- * Low level initialisation is done in board/linkstation/early_init.S
- * The values below are included for reference purpose only
- */
-
-/* FIXME: 32.768 MHz is the crystal frequency but */
-/* the real frequency is lower by about 0.75% */
-#define CONFIG_SYS_CLK_FREQ 32768000
-
-/* Bit-field values for MCCR1. */
-#define CONFIG_SYS_ROMNAL 0
-#define CONFIG_SYS_ROMFAL 11
-
-#define CONFIG_SYS_BANK0_ROW 2 /* Only bank 0 used: 13 x n x 4 */
-#define CONFIG_SYS_BANK1_ROW 0
-#define CONFIG_SYS_BANK2_ROW 0
-#define CONFIG_SYS_BANK3_ROW 0
-#define CONFIG_SYS_BANK4_ROW 0
-#define CONFIG_SYS_BANK5_ROW 0
-#define CONFIG_SYS_BANK6_ROW 0
-#define CONFIG_SYS_BANK7_ROW 0
-
-/* Bit-field values for MCCR2. */
-#define CONFIG_SYS_TSWAIT 0
-#if defined(CONFIG_LAN) || defined(CONFIG_HLAN)
-#define CONFIG_SYS_REFINT 0x15e0
-#elif defined(CONFIG_HGLAN) || defined(CONFIG_HTGL)
-#define CONFIG_SYS_REFINT 0x1580
-#endif
-
-/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4. */
-#define CONFIG_SYS_BSTOPRE 0x91c
-
-/* Bit-field values for MCCR3. */
-#define CONFIG_SYS_REFREC 7
-
-/* Bit-field values for MCCR4. */
-#define CONFIG_SYS_PRETOACT 2
-#define CONFIG_SYS_ACTTOPRE 2 /* Original value was 2 */
-#define CONFIG_SYS_ACTORW 2
-#if defined(CONFIG_LAN) || defined(CONFIG_HLAN)
-#define CONFIG_SYS_SDMODE_CAS_LAT 2 /* For 100MHz bus */
-/*#define CONFIG_SYS_SDMODE_BURSTLEN 3*/
-#elif defined(CONFIG_HGLAN) || defined(CONFIG_HTGL)
-#define CONFIG_SYS_SDMODE_CAS_LAT 3 /* For 133MHz bus */
-/*#define CONFIG_SYS_SDMODE_BURSTLEN 2*/
-#endif
-#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
-#define CONFIG_SYS_EXTROM 1 /* Original setting but there is no EXTROM */
-#define CONFIG_SYS_REGDIMM 0
-#define CONFIG_SYS_DBUS_SIZE2 1
-#define CONFIG_SYS_SDMODE_WRAP 0
-
-#define CONFIG_SYS_PGMAX 0x32 /* All boards use this setting. Original 0x92 */
-#define CONFIG_SYS_SDRAM_DSCD 0x30
-
-/* Memory bank settings.
- * Only bits 20-29 are actually used from these vales to set the
- * start/end addresses. The upper two bits will always be 0, and the lower
- * 20 bits will be 0x00000 for a start address, or 0xfffff for an end
- * address. Refer to the MPC8240 book.
- */
-
-#define CONFIG_SYS_BANK0_START 0x00000000
-#define CONFIG_SYS_BANK0_END (CONFIG_SYS_MAX_RAM_SIZE - 1)
-#define CONFIG_SYS_BANK0_ENABLE 1
-#define CONFIG_SYS_BANK1_START 0x3ff00000
-#define CONFIG_SYS_BANK1_END 0x3fffffff
-#define CONFIG_SYS_BANK1_ENABLE 0
-#define CONFIG_SYS_BANK2_START 0x3ff00000
-#define CONFIG_SYS_BANK2_END 0x3fffffff
-#define CONFIG_SYS_BANK2_ENABLE 0
-#define CONFIG_SYS_BANK3_START 0x3ff00000
-#define CONFIG_SYS_BANK3_END 0x3fffffff
-#define CONFIG_SYS_BANK3_ENABLE 0
-#define CONFIG_SYS_BANK4_START 0x3ff00000
-#define CONFIG_SYS_BANK4_END 0x3fffffff
-#define CONFIG_SYS_BANK4_ENABLE 0
-#define CONFIG_SYS_BANK5_START 0x3ff00000
-#define CONFIG_SYS_BANK5_END 0x3fffffff
-#define CONFIG_SYS_BANK5_ENABLE 0
-#define CONFIG_SYS_BANK6_START 0x3ff00000
-#define CONFIG_SYS_BANK6_END 0x3fffffff
-#define CONFIG_SYS_BANK6_ENABLE 0
-#define CONFIG_SYS_BANK7_START 0x3ff00000
-#define CONFIG_SYS_BANK7_END 0x3fffffff
-#define CONFIG_SYS_BANK7_ENABLE 0
-
-#define CONFIG_SYS_ODCR 0x15
-
-/*----------------------------------------------------------------------
- * Initial BAT mappings
- */
-
-/* NOTES:
- * 1) GUARDED and WRITETHROUGH not allowed in IBATS
- * 2) CACHEINHIBIT and WRITETHROUGH not allowed together in same BAT
- */
-
-/* SDRAM */
-#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_128M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
-#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
-
-/* EUMB: 1MB of address space */
-#define CONFIG_SYS_IBAT1L (CONFIG_SYS_EUMB_ADDR | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT1U (CONFIG_SYS_EUMB_ADDR | BATU_BL_1M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_DBAT1L (CONFIG_SYS_IBAT1L | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
-
-/* PCI Mem: 256MB of address space */
-#define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI_MEM_ADDR | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI_MEM_ADDR | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_DBAT2L (CONFIG_SYS_IBAT2L | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
-
-/* PCI and local ROM/Flash: last 32MB of address space */
-#define CONFIG_SYS_IBAT3L (CONFIG_SYS_MISC_REGION_ADDR | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT3U (CONFIG_SYS_MISC_REGION_ADDR | BATU_BL_32M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_DBAT3L (CONFIG_SYS_IBAT3L | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- *
- * FIXME: This doesn't appear to be true for the newer kernels
- * which map more that 8 MB
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
-#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
-
-#undef CONFIG_SYS_FLASH_PROTECTION
-#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max number of flash banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 72 /* Max number of sectors per flash */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 12000
-#define CONFIG_SYS_FLASH_WRITE_TOUT 1000
-
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
-#define CONFIG_SYS_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */
-
-#define CONFIG_ENV_IS_IN_FLASH
-/*
- * The original LinkStation flash organisation uses
- * 448 kB (0xFFF00000 - 0xFFF6FFFF) for the boot loader
- * We use the last sector of this area to store the environment
- * which leaves max. 384 kB for the U-Boot itself
- */
-#define CONFIG_ENV_ADDR 0xFFF60000
-#define CONFIG_ENV_SIZE 0x00010000
-#define CONFIG_ENV_SECT_SIZE 0x00010000
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 32
-#ifdef CONFIG_CMD_KGDB
-#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * IDE/ATA definitions
- */
-#undef CONFIG_IDE_LED /* No IDE LED */
-#define CONFIG_IDE_RESET /* no reset for ide supported */
-#define CONFIG_IDE_PREINIT /* check for units */
-#define CONFIG_LBA48 /* 48 bit LBA supported */
-
-#if defined(CONFIG_LAN) || defined(CONFIG_HLAN) || defined(CONFIG_HGLAN)
-#define CONFIG_SYS_IDE_MAXBUS 1 /* Scan only 1 IDE bus */
-#define CONFIG_SYS_IDE_MAXDEVICE 1 /* Only 1 drive per IDE bus */
-#elif defined(CONFIG_HGTL)
-#define CONFIG_SYS_IDE_MAXBUS 2 /* Max. 2 IDE busses */
-#define CONFIG_SYS_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */
-#else
-#error Config IDE: Unknown LinkStation type
-#endif
-
-#define CONFIG_SYS_ATA_BASE_ADDR 0
-
-#define CONFIG_SYS_ATA_DATA_OFFSET 0 /* Offset for data I/O */
-#define CONFIG_SYS_ATA_REG_OFFSET 0 /* Offset for normal registers */
-#define CONFIG_SYS_ATA_ALT_OFFSET 0 /* Offset for alternate registers */
-
-/*-----------------------------------------------------------------------
- * Partitions and file system
- */
-#define CONFIG_DOS_PARTITION
-
-#endif /* __CONFIG_H */
generated by cgit v1.1 at 2024-11-09 10:39:16 +0000