summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/Kconfig4
-rw-r--r--board/freescale/ls1021atwr/Kconfig23
-rw-r--r--board/freescale/ls1021atwr/MAINTAINERS6
-rw-r--r--board/freescale/ls1021atwr/Makefile7
-rw-r--r--board/freescale/ls1021atwr/README109
-rw-r--r--board/freescale/ls1021atwr/ls1021atwr.c482
-rw-r--r--configs/ls1021atwr_nor_defconfig2
-rw-r--r--include/configs/ls1021atwr.h273
8 files changed, 906 insertions, 0 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index d7ed3e2..11143a8 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -473,6 +473,9 @@ config TARGET_LS2085A_SIMU
config TARGET_LS1021AQDS
bool "Support ls1021aqds_nor"
+config TARGET_LS1021ATWR
+ bool "Support ls1021atwr_nor"
+
config TARGET_BALLOON3
bool "Support balloon3"
@@ -598,6 +601,7 @@ source "board/eukrea/cpuat91/Kconfig"
source "board/faraday/a320evb/Kconfig"
source "board/freescale/ls2085a/Kconfig"
source "board/freescale/ls1021aqds/Kconfig"
+source "board/freescale/ls1021atwr/Kconfig"
source "board/freescale/mx23evk/Kconfig"
source "board/freescale/mx25pdk/Kconfig"
source "board/freescale/mx28evk/Kconfig"
diff --git a/board/freescale/ls1021atwr/Kconfig b/board/freescale/ls1021atwr/Kconfig
new file mode 100644
index 0000000..057808d
--- /dev/null
+++ b/board/freescale/ls1021atwr/Kconfig
@@ -0,0 +1,23 @@
+if TARGET_LS1021ATWR
+
+config SYS_CPU
+ string
+ default "armv7"
+
+config SYS_BOARD
+ string
+ default "ls1021atwr"
+
+config SYS_VENDOR
+ string
+ default "freescale"
+
+config SYS_SOC
+ string
+ default "ls102xa"
+
+config SYS_CONFIG_NAME
+ string
+ default "ls1021atwr"
+
+endif
diff --git a/board/freescale/ls1021atwr/MAINTAINERS b/board/freescale/ls1021atwr/MAINTAINERS
new file mode 100644
index 0000000..4e5bc15
--- /dev/null
+++ b/board/freescale/ls1021atwr/MAINTAINERS
@@ -0,0 +1,6 @@
+LS1021ATWR BOARD
+M: Alison Wang <alison.wang@freescale.com>
+S: Maintained
+F: board/freescale/ls1021atwr/
+F: include/configs/ls1021atwr.h
+F: configs/ls1021atwr_nor_defconfig
diff --git a/board/freescale/ls1021atwr/Makefile b/board/freescale/ls1021atwr/Makefile
new file mode 100644
index 0000000..b5df668
--- /dev/null
+++ b/board/freescale/ls1021atwr/Makefile
@@ -0,0 +1,7 @@
+#
+# Copyright 2014 Freescale Semiconductor, Inc.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += ls1021atwr.o
diff --git a/board/freescale/ls1021atwr/README b/board/freescale/ls1021atwr/README
new file mode 100644
index 0000000..d2821cb
--- /dev/null
+++ b/board/freescale/ls1021atwr/README
@@ -0,0 +1,109 @@
+Overview
+--------
+The LS1021ATWR is a Freescale reference board that hosts the LS1021A SoC.
+
+LS1021A SoC Overview
+------------------
+The QorIQ LS1 family, which includes the LS1021A communications processor,
+is built on Layerscape architecture, the industry's first software-aware,
+core-agnostic networking architecture to offer unprecedented efficiency
+and scale.
+
+A member of the value-performance tier, the QorIQ LS1021A processor provides
+extensive integration and power efficiency for fanless, small form factor
+enterprise networking applications. Incorporating dual ARM Cortex-A7 cores
+running up to 1.0 GHz, the LS1021A processor delivers pre-silicon CoreMark
+performance of over 6,000, as well as virtualization support, advanced
+security features and the broadest array of high-speed interconnects and
+optimized peripheral features ever offered in a sub-3 W processor.
+
+The QorIQ LS1021A processor features an integrated LCD controller,
+CAN controller for implementing industrial protocols, DDR3L/4 running
+up to 1600 MHz, integrated security engine and QUICC Engine, and ECC
+protection on both L1 and L2 caches. The LS1021A processor is pin- and
+software-compatible with the QorIQ LS1020A and LS1022A processors.
+
+The LS1021A SoC includes the following function and features:
+
+ - ARM Cortex-A7 MPCore compliant with ARMv7-A architecture
+ - Dual high-preformance ARM Cortex-A7 cores, each core includes:
+ - 32 Kbyte L1 Instruction Cache and Data Cache for each core (ECC protection)
+ - 512 Kbyte shared coherent L2 Cache (with ECC protection)
+ - NEON Co-processor (per core)
+ - 40-bit physical addressing
+ - Vector floating-point support
+ - ARM Core-Link CCI-400 Cache Coherent Interconnect
+ - One DDR3L/DDR4 SDRAM memory controller with x8/x16/x32-bit configuration
+ supporting speeds up to 1600Mtps
+ - ECC and interleaving support
+ - VeTSEC Ethernet complex
+ - Up to 3x virtualized 10/100/1000 Ethernet controllers
+ - MII, RMII, RGMII, and SGMII support
+ - QoS, lossless flow control, and IEEE 1588 support
+ - 4-lane 6GHz SerDes
+ - High speed interconnect (4 SerDes lanes with are muxed for these protocol)
+ - Two PCI Express Gen2 controllers running at up to 5 GHz
+ - One Serial ATA 3.0 supporting 6 GT/s operation
+ - Two SGMII interfaces supporting 1000 Mbps
+ - Additional peripheral interfaces
+ - One high-speed USB 3.0 controller with integrated PHY and one high-speed
+ USB 2.00 controller with ULPI
+ - Integrated flash controller (IFC) with 16-bit interface
+ - Quad SPI NOR Flash
+ - One enhanced Secure digital host controller
+ - Display controller unit (DCU) 24-bit RGB (12-bit DDR pin interface)
+ - Ten UARTs comprised of two 16550 compliant DUARTs, and six low power
+ UARTs
+ - Three I2C controllers
+ - Eight FlexTimers four supporting PWM and four FlexCAN ports
+ - Four GPIO controllers supporting up to 109 general purpose I/O signals
+ - Integrated advanced audio block:
+ - Four synchronous audio interfaces (SAI)
+ - Sony/Philips Digital Interconnect Format (SPDIF)
+ - Asynchronous Sample Rate Converter (ASRC)
+ - Hardware based crypto offload engine
+ - IPSec forwarding at up to 1Gbps
+ - QorIQ Trust Architecture, Secure Boot, and ARM TrustZone supported
+ - Public key hardware accelerator
+ - True Random Number Generator (NIST Certified)
+ - Advanced Encryption Standard Accelerators (AESA)
+ - Data Encryption Standard Accelerators
+ - QUICC Engine ULite block
+ - Two universal communication controllers (TDM and HDLC) supporting 64
+ multichannels, each running at 64 Kbps
+ - Support for 256 channels of HDLC
+ - QorIQ TrustArchitecture with Secure Boot, as well as ARM TrustZone supported
+
+LS1021ATWR board Overview
+-------------------------
+ - DDR Controller
+ - Supports rates of up to 1600 MHz data-rate
+ - Supports one DDR3LP SDRAM.
+ - IFC/Local Bus
+ - NOR: 128MB 16-bit NOR Flash
+ - Ethernet
+ - Three on-board RGMII 10/100/1G ethernet ports.
+ - CPLD
+ - Clocks
+ - System and DDR clock (SYSCLK, DDRCLK)
+ - SERDES clocks
+ - Power Supplies
+ - SDHC
+ - SDHC/SDXC connector
+ - Other IO
+ - One Serial port
+ - Three I2C ports
+
+Memory map
+-----------
+The addresses in brackets are physical addresses.
+
+Start Address End Address Description Size
+0x00_0000_0000 0x00_000F_FFFF Secure Boot ROM 1MB
+0x00_0100_0000 0x00_0FFF_FFFF CCSRBAR 240MB
+0x00_1000_0000 0x00_1000_FFFF OCRAM0 64KB
+0x00_1001_0000 0x00_1001_FFFF OCRAM1 64KB
+0x00_2000_0000 0x00_20FF_FFFF DCSR 16MB
+0x00_4000_0000 0x00_5FFF_FFFF QSPI 512MB
+0x00_6000_0000 0x00_67FF_FFFF IFC - NOR Flash 128MB
+0x00_8000_0000 0x00_FFFF_FFFF DRAM1 2GB
diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c
new file mode 100644
index 0000000..92ad8cd
--- /dev/null
+++ b/board/freescale/ls1021atwr/ls1021atwr.c
@@ -0,0 +1,482 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <asm/io.h>
+#include <asm/arch/immap_ls102xa.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/fsl_serdes.h>
+#include <mmc.h>
+#include <fsl_esdhc.h>
+#include <fsl_ifc.h>
+#include <netdev.h>
+#include <fsl_mdio.h>
+#include <tsec.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define VERSION_MASK 0x00FF
+#define BANK_MASK 0x0001
+#define CONFIG_RESET 0x1
+#define INIT_RESET 0x1
+
+#define CPLD_SET_MUX_SERDES 0x20
+#define CPLD_SET_BOOT_BANK 0x40
+
+#define BOOT_FROM_UPPER_BANK 0x0
+#define BOOT_FROM_LOWER_BANK 0x1
+
+#define LANEB_SATA (0x01)
+#define LANEB_SGMII1 (0x02)
+#define LANEC_SGMII1 (0x04)
+#define LANEC_PCIEX1 (0x08)
+#define LANED_PCIEX2 (0x10)
+#define LANED_SGMII2 (0x20)
+
+#define MASK_LANE_B 0x1
+#define MASK_LANE_C 0x2
+#define MASK_LANE_D 0x4
+#define MASK_SGMII 0x8
+
+#define KEEP_STATUS 0x0
+#define NEED_RESET 0x1
+
+struct cpld_data {
+ u8 cpld_ver; /* cpld revision */
+ u8 cpld_ver_sub; /* cpld sub revision */
+ u8 pcba_ver; /* pcb revision number */
+ u8 system_rst; /* reset system by cpld */
+ u8 soft_mux_on; /* CPLD override physical switches Enable */
+ u8 cfg_rcw_src1; /* Reset config word 1 */
+ u8 cfg_rcw_src2; /* Reset config word 2 */
+ u8 vbank; /* Flash bank selection Control */
+ u8 gpio; /* GPIO for TWR-ELEV */
+ u8 i2c3_ifc_mux;
+ u8 mux_spi2;
+ u8 can3_usb2_mux; /* CAN3 and USB2 Selection */
+ u8 qe_lcd_mux; /* QE and LCD Selection */
+ u8 serdes_mux; /* Multiplexed pins for SerDes Lanes */
+ u8 global_rst; /* reset with init CPLD reg to default */
+ u8 rev1; /* Reserved */
+ u8 rev2; /* Reserved */
+};
+
+static void convert_serdes_mux(int type, int need_reset);
+
+void cpld_show(void)
+{
+ struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
+
+ printf("CPLD: V%x.%x\nPCBA: V%x.0\nVBank: %d\n",
+ in_8(&cpld_data->cpld_ver) & VERSION_MASK,
+ in_8(&cpld_data->cpld_ver_sub) & VERSION_MASK,
+ in_8(&cpld_data->pcba_ver) & VERSION_MASK,
+ in_8(&cpld_data->vbank) & BANK_MASK);
+
+#ifdef CONFIG_DEBUG
+ printf("soft_mux_on =%x\n",
+ in_8(&cpld_data->soft_mux_on));
+ printf("cfg_rcw_src1 =%x\n",
+ in_8(&cpld_data->cfg_rcw_src1));
+ printf("cfg_rcw_src2 =%x\n",
+ in_8(&cpld_data->cfg_rcw_src2));
+ printf("vbank =%x\n",
+ in_8(&cpld_data->vbank));
+ printf("gpio =%x\n",
+ in_8(&cpld_data->gpio));
+ printf("i2c3_ifc_mux =%x\n",
+ in_8(&cpld_data->i2c3_ifc_mux));
+ printf("mux_spi2 =%x\n",
+ in_8(&cpld_data->mux_spi2));
+ printf("can3_usb2_mux =%x\n",
+ in_8(&cpld_data->can3_usb2_mux));
+ printf("qe_lcd_mux =%x\n",
+ in_8(&cpld_data->qe_lcd_mux));
+ printf("serdes_mux =%x\n",
+ in_8(&cpld_data->serdes_mux));
+#endif
+}
+
+int checkboard(void)
+{
+ puts("Board: LS1021ATWR\n");
+ cpld_show();
+
+ return 0;
+}
+
+void ddrmc_init(void)
+{
+ struct ccsr_ddr *ddr = (struct ccsr_ddr *)CONFIG_SYS_FSL_DDR_ADDR;
+
+ out_be32(&ddr->sdram_cfg, DDR_SDRAM_CFG);
+
+ out_be32(&ddr->cs0_bnds, DDR_CS0_BNDS);
+ out_be32(&ddr->cs0_config, DDR_CS0_CONFIG);
+
+ out_be32(&ddr->timing_cfg_0, DDR_TIMING_CFG_0);
+ out_be32(&ddr->timing_cfg_1, DDR_TIMING_CFG_1);
+ out_be32(&ddr->timing_cfg_2, DDR_TIMING_CFG_2);
+ out_be32(&ddr->timing_cfg_3, DDR_TIMING_CFG_3);
+ out_be32(&ddr->timing_cfg_4, DDR_TIMING_CFG_4);
+ out_be32(&ddr->timing_cfg_5, DDR_TIMING_CFG_5);
+
+ out_be32(&ddr->sdram_cfg_2, DDR_SDRAM_CFG_2);
+
+ out_be32(&ddr->sdram_mode, DDR_SDRAM_MODE);
+ out_be32(&ddr->sdram_mode_2, DDR_SDRAM_MODE_2);
+
+ out_be32(&ddr->sdram_interval, DDR_SDRAM_INTERVAL);
+
+ out_be32(&ddr->ddr_wrlvl_cntl, DDR_DDR_WRLVL_CNTL);
+
+ out_be32(&ddr->ddr_wrlvl_cntl_2, DDR_DDR_WRLVL_CNTL_2);
+ out_be32(&ddr->ddr_wrlvl_cntl_3, DDR_DDR_WRLVL_CNTL_3);
+
+ out_be32(&ddr->ddr_cdr1, DDR_DDR_CDR1);
+ out_be32(&ddr->ddr_cdr2, DDR_DDR_CDR2);
+
+ out_be32(&ddr->sdram_clk_cntl, DDR_SDRAM_CLK_CNTL);
+ out_be32(&ddr->ddr_zq_cntl, DDR_DDR_ZQ_CNTL);
+
+ out_be32(&ddr->cs0_config_2, DDR_CS0_CONFIG_2);
+ udelay(1);
+ out_be32(&ddr->sdram_cfg, DDR_SDRAM_CFG | DDR_SDRAM_CFG_MEM_EN);
+}
+
+int dram_init(void)
+{
+#if (!defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD))
+ ddrmc_init();
+#endif
+
+ gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
+ return 0;
+}
+
+#ifdef CONFIG_FSL_ESDHC
+struct fsl_esdhc_cfg esdhc_cfg[1] = {
+ {CONFIG_SYS_FSL_ESDHC_ADDR},
+};
+
+int board_mmc_init(bd_t *bis)
+{
+ esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+
+ return fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
+}
+#endif
+
+#ifdef CONFIG_TSEC_ENET
+int board_eth_init(bd_t *bis)
+{
+ struct fsl_pq_mdio_info mdio_info;
+ struct tsec_info_struct tsec_info[4];
+ int num = 0;
+
+#ifdef CONFIG_TSEC1
+ SET_STD_TSEC_INFO(tsec_info[num], 1);
+ if (is_serdes_configured(SGMII_TSEC1)) {
+ puts("eTSEC1 is in sgmii mode.\n");
+ tsec_info[num].flags |= TSEC_SGMII;
+ }
+ num++;
+#endif
+#ifdef CONFIG_TSEC2
+ SET_STD_TSEC_INFO(tsec_info[num], 2);
+ if (is_serdes_configured(SGMII_TSEC2)) {
+ puts("eTSEC2 is in sgmii mode.\n");
+ tsec_info[num].flags |= TSEC_SGMII;
+ }
+ num++;
+#endif
+#ifdef CONFIG_TSEC3
+ SET_STD_TSEC_INFO(tsec_info[num], 3);
+ num++;
+#endif
+ if (!num) {
+ printf("No TSECs initialized\n");
+ return 0;
+ }
+
+ mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
+ mdio_info.name = DEFAULT_MII_NAME;
+ fsl_pq_mdio_init(bis, &mdio_info);
+
+ tsec_eth_init(bis, tsec_info, num);
+
+ return pci_eth_init(bis);
+}
+#endif
+
+int config_serdes_mux(void)
+{
+ struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+ u32 protocol = in_be32(&gur->rcwsr[4]) & RCWSR4_SRDS1_PRTCL_MASK;
+
+ protocol >>= RCWSR4_SRDS1_PRTCL_SHIFT;
+ switch (protocol) {
+ case 0x10:
+ convert_serdes_mux(LANEB_SATA, KEEP_STATUS);
+ convert_serdes_mux(LANED_PCIEX2 |
+ LANEC_PCIEX1, KEEP_STATUS);
+ break;
+ case 0x20:
+ convert_serdes_mux(LANEB_SGMII1, KEEP_STATUS);
+ convert_serdes_mux(LANEC_PCIEX1, KEEP_STATUS);
+ convert_serdes_mux(LANED_SGMII2, KEEP_STATUS);
+ break;
+ case 0x30:
+ convert_serdes_mux(LANEB_SATA, KEEP_STATUS);
+ convert_serdes_mux(LANEC_SGMII1, KEEP_STATUS);
+ convert_serdes_mux(LANED_SGMII2, KEEP_STATUS);
+ break;
+ case 0x70:
+ convert_serdes_mux(LANEB_SATA, KEEP_STATUS);
+ convert_serdes_mux(LANEC_PCIEX1, KEEP_STATUS);
+ convert_serdes_mux(LANED_SGMII2, KEEP_STATUS);
+ break;
+ }
+
+ return 0;
+}
+
+int board_early_init_f(void)
+{
+ struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
+
+#ifdef CONFIG_TSEC_ENET
+ out_be32(&scfg->scfgrevcr, SCFG_SCFGREVCR_REV);
+ out_be32(&scfg->etsecdmamcr, SCFG_ETSECDMAMCR_LE_BD_FR);
+ out_be32(&scfg->etsecmcr, SCFG_ETSECCMCR_GE2_CLK125);
+ udelay(10);
+ out_be32(&scfg->scfgrevcr, SCFG_SCFGREVCR_NOREV);
+#endif
+
+#ifdef CONFIG_FSL_IFC
+ init_early_memctl_regs();
+#endif
+
+ return 0;
+}
+
+int board_init(void)
+{
+#ifndef CONFIG_SYS_FSL_NO_SERDES
+ fsl_serdes_init();
+ config_serdes_mux();
+#endif
+
+ return 0;
+}
+
+void ft_board_setup(void *blob, bd_t *bd)
+{
+ ft_cpu_setup(blob, bd);
+}
+
+u8 flash_read8(void *addr)
+{
+ return __raw_readb(addr + 1);
+}
+
+void flash_write16(u16 val, void *addr)
+{
+ u16 shftval = (((val >> 8) & 0xff) | ((val << 8) & 0xff00));
+
+ __raw_writew(shftval, addr);
+}
+
+u16 flash_read16(void *addr)
+{
+ u16 val = __raw_readw(addr);
+
+ return (((val) >> 8) & 0x00ff) | (((val) << 8) & 0xff00);
+}
+
+static void convert_flash_bank(char bank)
+{
+ struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
+
+ printf("Now switch to boot from flash bank %d.\n", bank);
+ cpld_data->soft_mux_on = CPLD_SET_BOOT_BANK;
+ cpld_data->vbank = bank;
+
+ printf("Reset board to enable configuration.\n");
+ cpld_data->system_rst = CONFIG_RESET;
+}
+
+static int flash_bank_cmd(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ if (argc != 2)
+ return CMD_RET_USAGE;
+ if (strcmp(argv[1], "0") == 0)
+ convert_flash_bank(BOOT_FROM_UPPER_BANK);
+ else if (strcmp(argv[1], "1") == 0)
+ convert_flash_bank(BOOT_FROM_LOWER_BANK);
+ else
+ return CMD_RET_USAGE;
+
+ return 0;
+}
+
+U_BOOT_CMD(
+ boot_bank, 2, 0, flash_bank_cmd,
+ "Flash bank Selection Control",
+ "bank[0-upper bank/1-lower bank] (e.g. boot_bank 0)"
+);
+
+static int cpld_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
+
+ if (argc > 2)
+ return CMD_RET_USAGE;
+ if ((argc == 1) || (strcmp(argv[1], "conf") == 0))
+ cpld_data->system_rst = CONFIG_RESET;
+ else if (strcmp(argv[1], "init") == 0)
+ cpld_data->global_rst = INIT_RESET;
+ else
+ return CMD_RET_USAGE;
+
+ return 0;
+}
+
+U_BOOT_CMD(
+ cpld_reset, 2, 0, cpld_reset_cmd,
+ "Reset via CPLD",
+ "conf\n"
+ " -reset with current CPLD configuration\n"
+ "init\n"
+ " -reset and initial CPLD configuration with default value"
+
+);
+
+static void convert_serdes_mux(int type, int need_reset)
+{
+ char current_serdes;
+ struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
+
+ current_serdes = cpld_data->serdes_mux;
+
+ switch (type) {
+ case LANEB_SATA:
+ current_serdes &= ~MASK_LANE_B;
+ break;
+ case LANEB_SGMII1:
+ current_serdes |= (MASK_LANE_B | MASK_SGMII | MASK_LANE_C);
+ break;
+ case LANEC_SGMII1:
+ current_serdes &= ~(MASK_LANE_B | MASK_SGMII | MASK_LANE_C);
+ break;
+ case LANED_SGMII2:
+ current_serdes |= MASK_LANE_D;
+ break;
+ case LANEC_PCIEX1:
+ current_serdes |= MASK_LANE_C;
+ break;
+ case (LANED_PCIEX2 | LANEC_PCIEX1):
+ current_serdes |= MASK_LANE_C;
+ current_serdes &= ~MASK_LANE_D;
+ break;
+ default:
+ printf("CPLD serdes MUX: unsupported MUX type 0x%x\n", type);
+ return;
+ }
+
+ cpld_data->soft_mux_on |= CPLD_SET_MUX_SERDES;
+ cpld_data->serdes_mux = current_serdes;
+
+ if (need_reset == 1) {
+ printf("Reset board to enable configuration\n");
+ cpld_data->system_rst = CONFIG_RESET;
+ }
+}
+
+void print_serdes_mux(void)
+{
+ char current_serdes;
+ struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
+
+ current_serdes = cpld_data->serdes_mux;
+
+ printf("Serdes Lane B: ");
+ if ((current_serdes & MASK_LANE_B) == 0)
+ printf("SATA,\n");
+ else
+ printf("SGMII 1,\n");
+
+ printf("Serdes Lane C: ");
+ if ((current_serdes & MASK_LANE_C) == 0)
+ printf("SGMII 1,\n");
+ else
+ printf("PCIe,\n");
+
+ printf("Serdes Lane D: ");
+ if ((current_serdes & MASK_LANE_D) == 0)
+ printf("PCIe,\n");
+ else
+ printf("SGMII 2,\n");
+
+ printf("SGMII 1 is on lane ");
+ if ((current_serdes & MASK_SGMII) == 0)
+ printf("C.\n");
+ else
+ printf("B.\n");
+}
+
+static int serdes_mux_cmd(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ if (argc != 2)
+ return CMD_RET_USAGE;
+ if (strcmp(argv[1], "sata") == 0) {
+ printf("Set serdes lane B to SATA.\n");
+ convert_serdes_mux(LANEB_SATA, NEED_RESET);
+ } else if (strcmp(argv[1], "sgmii1b") == 0) {
+ printf("Set serdes lane B to SGMII 1.\n");
+ convert_serdes_mux(LANEB_SGMII1, NEED_RESET);
+ } else if (strcmp(argv[1], "sgmii1c") == 0) {
+ printf("Set serdes lane C to SGMII 1.\n");
+ convert_serdes_mux(LANEC_SGMII1, NEED_RESET);
+ } else if (strcmp(argv[1], "sgmii2") == 0) {
+ printf("Set serdes lane D to SGMII 2.\n");
+ convert_serdes_mux(LANED_SGMII2, NEED_RESET);
+ } else if (strcmp(argv[1], "pciex1") == 0) {
+ printf("Set serdes lane C to PCIe X1.\n");
+ convert_serdes_mux(LANEC_PCIEX1, NEED_RESET);
+ } else if (strcmp(argv[1], "pciex2") == 0) {
+ printf("Set serdes lane C & lane D to PCIe X2.\n");
+ convert_serdes_mux((LANED_PCIEX2 | LANEC_PCIEX1), NEED_RESET);
+ } else if (strcmp(argv[1], "show") == 0) {
+ print_serdes_mux();
+ } else {
+ return CMD_RET_USAGE;
+ }
+
+ return 0;
+}
+
+U_BOOT_CMD(
+ lane_bank, 2, 0, serdes_mux_cmd,
+ "Multiplexed function setting for SerDes Lanes",
+ "sata\n"
+ " -change lane B to sata\n"
+ "lane_bank sgmii1b\n"
+ " -change lane B to SGMII1\n"
+ "lane_bank sgmii1c\n"
+ " -change lane C to SGMII1\n"
+ "lane_bank sgmii2\n"
+ " -change lane D to SGMII2\n"
+ "lane_bank pciex1\n"
+ " -change lane C to PCIeX1\n"
+ "lane_bank pciex2\n"
+ " -change lane C & lane D to PCIeX2\n"
+ "\nWARNING: If you aren't familiar with the setting of serdes, don't try to change anything!\n"
+);
diff --git a/configs/ls1021atwr_nor_defconfig b/configs/ls1021atwr_nor_defconfig
new file mode 100644
index 0000000..5f465d3
--- /dev/null
+++ b/configs/ls1021atwr_nor_defconfig
@@ -0,0 +1,2 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1021ATWR=y
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
new file mode 100644
index 0000000..cb6b400
--- /dev/null
+++ b/include/configs/ls1021atwr.h
@@ -0,0 +1,273 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <config_cmd_default.h>
+
+#define CONFIG_LS102XA
+
+#define CONFIG_SYS_GENERIC_BOARD
+
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_BOARD_EARLY_INIT_F
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 16 * 1024 * 1024)
+
+#define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE
+
+/*
+ * Generic Timer Definitions
+ */
+#define GENERIC_TIMER_CLK 12500000
+
+#define CONFIG_SYS_CLK_FREQ 100000000
+#define CONFIG_DDR_CLK_FREQ 100000000
+
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE 0x67f80000
+#endif
+
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM 0x80000000
+#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024)
+
+#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL
+#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
+
+#define CONFIG_SYS_HAS_SERDES
+
+/*
+ * IFC Definitions
+ */
+#define CONFIG_FSL_IFC
+#define CONFIG_SYS_FLASH_BASE 0x60000000
+#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
+
+#define CONFIG_SYS_NOR0_CSPR_EXT (0x0)
+#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
+ CSPR_PORT_SIZE_16 | \
+ CSPR_MSEL_NOR | \
+ CSPR_V)
+#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128 * 1024 * 1024)
+
+/* NOR Flash Timing Params */
+#define CONFIG_SYS_NOR_CSOR (CSOR_NOR_ADM_SHIFT(4) | \
+ CSOR_NOR_TRHZ_80)
+#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \
+ FTIM0_NOR_TEADC(0x5) | \
+ FTIM0_NOR_TAVDS(0x0) | \
+ FTIM0_NOR_TEAHC(0x5))
+#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \
+ FTIM1_NOR_TRAD_NOR(0x1A) | \
+ FTIM1_NOR_TSEQRAD_NOR(0x13))
+#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \
+ FTIM2_NOR_TCH(0x4) | \
+ FTIM2_NOR_TWP(0x1c) | \
+ FTIM2_NOR_TWPH(0x0e))
+#define CONFIG_SYS_NOR_FTIM3 0
+
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#define CONFIG_SYS_FLASH_QUIET_TEST
+#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
+
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */
+#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
+
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS }
+
+#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
+
+/* CPLD */
+
+#define CONFIG_SYS_CPLD_BASE 0x7fb00000
+#define CPLD_BASE_PHYS CONFIG_SYS_CPLD_BASE
+
+#define CONFIG_SYS_FPGA_CSPR_EXT (0x0)
+#define CONFIG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(CPLD_BASE_PHYS) | \
+ CSPR_PORT_SIZE_8 | \
+ CSPR_MSEL_GPCM | \
+ CSPR_V)
+#define CONFIG_SYS_FPGA_AMASK IFC_AMASK(64 * 1024)
+#define CONFIG_SYS_FPGA_CSOR (CSOR_NOR_ADM_SHIFT(4) | \
+ CSOR_NOR_NOR_MODE_AVD_NOR | \
+ CSOR_NOR_TRHZ_80)
+
+/* CPLD Timing parameters for IFC GPCM */
+#define CONFIG_SYS_FPGA_FTIM0 (FTIM0_GPCM_TACSE(0xf) | \
+ FTIM0_GPCM_TEADC(0xf) | \
+ FTIM0_GPCM_TEAHC(0xf))
+#define CONFIG_SYS_FPGA_FTIM1 (FTIM1_GPCM_TACO(0xff) | \
+ FTIM1_GPCM_TRAD(0x3f))
+#define CONFIG_SYS_FPGA_FTIM2 (FTIM2_GPCM_TCS(0xf) | \
+ FTIM2_GPCM_TCH(0xf) | \
+ FTIM2_GPCM_TWP(0xff))
+#define CONFIG_SYS_FPGA_FTIM3 0x0
+#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT
+#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR
+#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK
+#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR
+#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0
+#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1
+#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2
+#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3
+#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_FPGA_CSPR_EXT
+#define CONFIG_SYS_CSPR1 CONFIG_SYS_FPGA_CSPR
+#define CONFIG_SYS_AMASK1 CONFIG_SYS_FPGA_AMASK
+#define CONFIG_SYS_CSOR1 CONFIG_SYS_FPGA_CSOR
+#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_FPGA_FTIM0
+#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_FPGA_FTIM1
+#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_FPGA_FTIM2
+#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_FPGA_FTIM3
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE 1
+#define CONFIG_SYS_NS16550_CLK get_serial_clock()
+
+#define CONFIG_BAUDRATE 115200
+
+/*
+ * I2C
+ */
+#define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+
+/*
+ * MMC
+ */
+#define CONFIG_MMC
+#define CONFIG_CMD_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_GENERIC_MMC
+
+/*
+ * eTSEC
+ */
+#define CONFIG_TSEC_ENET
+
+#ifdef CONFIG_TSEC_ENET
+#define CONFIG_MII
+#define CONFIG_MII_DEFAULT_TSEC 1
+#define CONFIG_TSEC1 1
+#define CONFIG_TSEC1_NAME "eTSEC1"
+#define CONFIG_TSEC2 1
+#define CONFIG_TSEC2_NAME "eTSEC2"
+#define CONFIG_TSEC3 1
+#define CONFIG_TSEC3_NAME "eTSEC3"
+
+#define TSEC1_PHY_ADDR 2
+#define TSEC2_PHY_ADDR 0
+#define TSEC3_PHY_ADDR 1
+
+#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
+#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
+#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
+
+#define TSEC1_PHYIDX 0
+#define TSEC2_PHYIDX 0
+#define TSEC3_PHYIDX 0
+
+#define CONFIG_ETHPRIME "eTSEC1"
+
+#define CONFIG_PHY_GIGE
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_ATHEROS
+
+#define CONFIG_HAS_ETH0
+#define CONFIG_HAS_ETH1
+#define CONFIG_HAS_ETH2
+#endif
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_CMD_IMLS
+
+#define CONFIG_HWCONFIG
+#define HWCONFIG_BUFFER_SIZE 128
+
+#define CONFIG_BOOTDELAY 3
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \
+ "initrd_high=0xcfffffff\0" \
+ "fdt_high=0xcfffffff\0"
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_PROMPT "=> "
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE \
+ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+#define CONFIG_CMD_ENV_EXISTS
+#define CONFIG_CMD_GREPENV
+#define CONFIG_CMD_MEMINFO
+#define CONFIG_CMD_MEMTEST
+#define CONFIG_SYS_MEMTEST_START 0x80000000
+#define CONFIG_SYS_MEMTEST_END 0x9fffffff
+
+#define CONFIG_SYS_LOAD_ADDR 0x82000000
+#define CONFIG_SYS_HZ 1000
+
+/*
+ * Stack sizes
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE (30 * 1024)
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
+
+/*
+ * Environment
+ */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE 0x20000
+#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
+
+#define CONFIG_OF_LIBFDT
+#define CONFIG_OF_BOARD_SETUP
+#define CONFIG_CMD_BOOTZ
+
+#endif