diff options
61 files changed, 1050 insertions, 217 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 4aabcff..cd18732 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1112,6 +1112,7 @@ Wolfgang Wegner <w.wegner@astro-kom.de> Andreas Bießmann <andreas.devel@googlemail.com> grasshopper AT32AP7000 + atngw100mkii AT32AP7000 Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> diff --git a/arch/arm/include/asm/arch-exynos/mmc.h b/arch/arm/include/asm/arch-exynos/mmc.h index 0f701c9..afdfcf0 100644 --- a/arch/arm/include/asm/arch-exynos/mmc.h +++ b/arch/arm/include/asm/arch-exynos/mmc.h @@ -64,11 +64,11 @@ #define SDHCI_CTRL4_DRIVE_MASK(_x) ((_x) << 16) #define SDHCI_CTRL4_DRIVE_SHIFT (16) -int s5p_sdhci_init(u32 regbase, u32 max_clk, u32 min_clk, u32 quirks); +int s5p_sdhci_init(u32 regbase, int index, int bus_width); static inline unsigned int s5p_mmc_init(int index, int bus_width) { unsigned int base = samsung_get_base_mmc() + (0x10000 * index); - return s5p_sdhci_init(base, 52000000, 400000, index); + return s5p_sdhci_init(base, index, bus_width); } #endif diff --git a/arch/arm/include/asm/arch-omap4/cpu.h b/arch/arm/include/asm/arch-omap4/cpu.h index a8c4c60..3a0bfbf 100644 --- a/arch/arm/include/asm/arch-omap4/cpu.h +++ b/arch/arm/include/asm/arch-omap4/cpu.h @@ -138,6 +138,7 @@ struct watchdog { #define I2C_BASE1 (OMAP44XX_L4_PER_BASE + 0x70000) #define I2C_BASE2 (OMAP44XX_L4_PER_BASE + 0x72000) #define I2C_BASE3 (OMAP44XX_L4_PER_BASE + 0x60000) +#define I2C_BASE4 (OMAP44XX_L4_PER_BASE + 0x350000) /* MUSB base */ #define MUSB_BASE (OMAP44XX_L4_CORE_BASE + 0xAB000) diff --git a/arch/arm/include/asm/arch-omap4/i2c.h b/arch/arm/include/asm/arch-omap4/i2c.h index a91b4c2..02ee2f8 100644 --- a/arch/arm/include/asm/arch-omap4/i2c.h +++ b/arch/arm/include/asm/arch-omap4/i2c.h @@ -23,7 +23,7 @@ #ifndef _OMAP4_I2C_H_ #define _OMAP4_I2C_H_ -#define I2C_BUS_MAX 3 +#define I2C_BUS_MAX 4 #define I2C_DEFAULT_BASE I2C_BASE1 struct i2c { diff --git a/arch/arm/include/asm/arch-s5pc1xx/mmc.h b/arch/arm/include/asm/arch-s5pc1xx/mmc.h index 0f701c9..afdfcf0 100644 --- a/arch/arm/include/asm/arch-s5pc1xx/mmc.h +++ b/arch/arm/include/asm/arch-s5pc1xx/mmc.h @@ -64,11 +64,11 @@ #define SDHCI_CTRL4_DRIVE_MASK(_x) ((_x) << 16) #define SDHCI_CTRL4_DRIVE_SHIFT (16) -int s5p_sdhci_init(u32 regbase, u32 max_clk, u32 min_clk, u32 quirks); +int s5p_sdhci_init(u32 regbase, int index, int bus_width); static inline unsigned int s5p_mmc_init(int index, int bus_width) { unsigned int base = samsung_get_base_mmc() + (0x10000 * index); - return s5p_sdhci_init(base, 52000000, 400000, index); + return s5p_sdhci_init(base, index, bus_width); } #endif diff --git a/arch/microblaze/config.mk b/arch/microblaze/config.mk index aca79e2..b4935f0 100644 --- a/arch/microblaze/config.mk +++ b/arch/microblaze/config.mk @@ -31,3 +31,5 @@ CONFIG_STANDALONE_LOAD_ADDR ?= 0x80F00000 PLATFORM_CPPFLAGS += -ffixed-r31 -D__microblaze__ LDSCRIPT ?= $(SRCTREE)/$(CPUDIR)/u-boot.lds + +CONFIG_ARCH_DEVICE_TREE := microblaze diff --git a/arch/microblaze/cpu/interrupts.c b/arch/microblaze/cpu/interrupts.c index ee67082..7f2ee64 100644 --- a/arch/microblaze/cpu/interrupts.c +++ b/arch/microblaze/cpu/interrupts.c @@ -32,15 +32,12 @@ #undef DEBUG_INT -extern void microblaze_disable_interrupts (void); -extern void microblaze_enable_interrupts (void); - -void enable_interrupts (void) +void enable_interrupts(void) { MSRSET(0x2); } -int disable_interrupts (void) +int disable_interrupts(void) { unsigned int msr; @@ -58,20 +55,21 @@ microblaze_intc_t *intc; /* default handler */ static void def_hdlr(void) { - puts ("def_hdlr\n"); + puts("def_hdlr\n"); } static void enable_one_interrupt(int irq) { int mask; int offset = 1; + offset <<= irq; mask = intc->ier; intc->ier = (mask | offset); #ifdef DEBUG_INT - printf ("Enable one interrupt irq %x - mask %x,ier %x\n", offset, mask, + printf("Enable one interrupt irq %x - mask %x,ier %x\n", offset, mask, intc->ier); - printf ("INTC isr %x, ier %x, iar %x, mer %x\n", intc->isr, intc->ier, + printf("INTC isr %x, ier %x, iar %x, mer %x\n", intc->isr, intc->ier, intc->iar, intc->mer); #endif } @@ -80,25 +78,26 @@ static void disable_one_interrupt(int irq) { int mask; int offset = 1; + offset <<= irq; mask = intc->ier; intc->ier = (mask & ~offset); #ifdef DEBUG_INT - printf ("Disable one interrupt irq %x - mask %x,ier %x\n", irq, mask, + printf("Disable one interrupt irq %x - mask %x,ier %x\n", irq, mask, intc->ier); - printf ("INTC isr %x, ier %x, iar %x, mer %x\n", intc->isr, intc->ier, + printf("INTC isr %x, ier %x, iar %x, mer %x\n", intc->isr, intc->ier, intc->iar, intc->mer); #endif } -/* adding new handler for interrupt */ -void install_interrupt_handler (int irq, interrupt_handler_t * hdlr, void *arg) +int install_interrupt_handler(int irq, interrupt_handler_t *hdlr, void *arg) { struct irq_action *act; + /* irq out of range */ if ((irq < 0) || (irq > irq_no)) { - puts ("IRQ out of range\n"); - return; + puts("IRQ out of range\n"); + return -1; } act = &vecs[irq]; if (hdlr) { /* enable */ @@ -106,11 +105,14 @@ void install_interrupt_handler (int irq, interrupt_handler_t * hdlr, void *arg) act->arg = arg; act->count = 0; enable_one_interrupt (irq); - } else { /* disable */ - act->handler = (interrupt_handler_t *) def_hdlr; - act->arg = (void *)irq; - disable_one_interrupt (irq); + return 0; } + + /* Disable */ + act->handler = (interrupt_handler_t *) def_hdlr; + act->arg = (void *)irq; + disable_one_interrupt(irq); + return 1; } /* initialization interrupt controller - hardware */ @@ -122,7 +124,7 @@ static void intc_init(void) /* XIntc_Start - hw_interrupt enable and all interrupt enable */ intc->mer = 0x3; #ifdef DEBUG_INT - printf ("INTC isr %x, ier %x, iar %x, mer %x\n", intc->isr, intc->ier, + printf("INTC isr %x, ier %x, iar %x, mer %x\n", intc->isr, intc->ier, intc->iar, intc->mer); #endif } @@ -157,7 +159,7 @@ int interrupts_init(void) return 0; } -void interrupt_handler (void) +void interrupt_handler(void) { int irqs = intc->ivr; /* find active interrupt */ int mask = 1; diff --git a/arch/microblaze/cpu/start.S b/arch/microblaze/cpu/start.S index 8a2f634..8564c4e 100644 --- a/arch/microblaze/cpu/start.S +++ b/arch/microblaze/cpu/start.S @@ -149,7 +149,7 @@ clear_bss: cmp r6, r5, r4 /* check if we have reach the end */ bnei r6, 2b 3: /* jumping to board_init */ - brai board_init + brai board_init_f 1: bri 1b /* diff --git a/arch/microblaze/cpu/timer.c b/arch/microblaze/cpu/timer.c index cc6b897..1330401 100644 --- a/arch/microblaze/cpu/timer.c +++ b/arch/microblaze/cpu/timer.c @@ -27,42 +27,30 @@ #include <asm/microblaze_intc.h> volatile int timestamp = 0; +microblaze_timer_t *tmr; -#ifdef CONFIG_SYS_TIMER_0 ulong get_timer (ulong base) { - return (timestamp - base); + if (tmr) + return timestamp - base; + return timestamp++ - base; } -#else -ulong get_timer (ulong base) -{ - return (timestamp++ - base); -} -#endif -#ifdef CONFIG_SYS_TIMER_0 void __udelay(unsigned long usec) { - int i; + u32 i; - i = get_timer(0); - while ((get_timer(0) - i) < (usec / 1000)) - ; + if (tmr) { + i = get_timer(0); + while ((get_timer(0) - i) < (usec / 1000)) + ; + } else { + for (i = 0; i < (usec * XILINX_CLOCK_FREQ / 10000000); i++) + ; + } } -#else -void __udelay(unsigned long usec) -{ - unsigned int i; - for (i = 0; i < (usec * CONFIG_XILINX_CLOCK_FREQ / 10000000); i++) - ; -} -#endif - -#ifdef CONFIG_SYS_TIMER_0 -microblaze_timer_t *tmr = (microblaze_timer_t *) (CONFIG_SYS_TIMER_0_ADDR); - -void timer_isr (void *arg) +static void timer_isr(void *arg) { timestamp++; tmr->control = tmr->control | TIMER_INTERRUPT; @@ -70,15 +58,30 @@ void timer_isr (void *arg) int timer_init (void) { - tmr->loadreg = CONFIG_SYS_TIMER_0_PRELOAD; - tmr->control = TIMER_INTERRUPT | TIMER_RESET; - tmr->control = - TIMER_ENABLE | TIMER_ENABLE_INTR | TIMER_RELOAD | TIMER_DOWN_COUNT; - timestamp = 0; - install_interrupt_handler (CONFIG_SYS_TIMER_0_IRQ, timer_isr, (void *)tmr); + int irq = -1; + u32 preload = 0; + u32 ret = 0; + +#if defined(CONFIG_SYS_TIMER_0_ADDR) && defined(CONFIG_SYS_INTC_0_NUM) + preload = XILINX_CLOCK_FREQ / CONFIG_SYS_HZ; + irq = CONFIG_SYS_TIMER_0_IRQ; + tmr = (microblaze_timer_t *) (CONFIG_SYS_TIMER_0_ADDR); +#endif + + if (tmr && preload && irq >= 0) { + tmr->loadreg = preload; + tmr->control = TIMER_INTERRUPT | TIMER_RESET; + tmr->control = TIMER_ENABLE | TIMER_ENABLE_INTR |\ + TIMER_RELOAD | TIMER_DOWN_COUNT; + timestamp = 0; + ret = install_interrupt_handler (irq, timer_isr, (void *)tmr); + if (ret) + tmr = NULL; + } + + /* No problem if timer is not found/initialized */ return 0; } -#endif /* * This function is derived from PowerPC code (read timebase as long long). diff --git a/arch/microblaze/cpu/u-boot.lds b/arch/microblaze/cpu/u-boot.lds index ee41145..d033a28 100644 --- a/arch/microblaze/cpu/u-boot.lds +++ b/arch/microblaze/cpu/u-boot.lds @@ -45,6 +45,7 @@ SECTIONS .data ALIGN(0x4): { __data_start = .; + dts/libdts.o (.data) *(.data) __data_end = .; } diff --git a/arch/microblaze/include/asm/global_data.h b/arch/microblaze/include/asm/global_data.h index 0dc4ce9..de3b8db 100644 --- a/arch/microblaze/include/asm/global_data.h +++ b/arch/microblaze/include/asm/global_data.h @@ -41,6 +41,7 @@ typedef struct global_data { unsigned long precon_buf_idx; /* Pre-Console buffer index */ #endif unsigned long env_addr; /* Address of Environment struct */ + const void *fdt_blob; /* Our device tree, NULL if none */ unsigned long env_valid; /* Checksum of Environment valid? */ unsigned long fb_base; /* base address of frame buffer */ void **jt; /* jump table */ diff --git a/arch/microblaze/include/asm/microblaze_intc.h b/arch/microblaze/include/asm/microblaze_intc.h index 6142b9c..e9640f5 100644 --- a/arch/microblaze/include/asm/microblaze_intc.h +++ b/arch/microblaze/include/asm/microblaze_intc.h @@ -39,7 +39,16 @@ struct irq_action { int count; /* number of interrupt */ }; -void install_interrupt_handler (int irq, interrupt_handler_t * hdlr, +/** + * Register and unregister interrupt handler rutines + * + * @param irq IRQ number + * @param hdlr Interrupt handler rutine + * @param arg Pointer to argument which is passed to int. handler rutine + * @return 0 if registration pass, 1 if unregistration pass, + * or an error code < 0 otherwise + */ +int install_interrupt_handler(int irq, interrupt_handler_t *hdlr, void *arg); int interrupts_init(void); diff --git a/arch/microblaze/include/asm/microblaze_timer.h b/arch/microblaze/include/asm/microblaze_timer.h index 844c8db..28e8b02 100644 --- a/arch/microblaze/include/asm/microblaze_timer.h +++ b/arch/microblaze/include/asm/microblaze_timer.h @@ -39,3 +39,6 @@ typedef volatile struct microblaze_timer_t { int loadreg; /* load register TLR */ int counter; /* timer/counter register */ } microblaze_timer_t; + +int timer_init(void); + diff --git a/arch/microblaze/include/asm/processor.h b/arch/microblaze/include/asm/processor.h index 2295d0a..2c4d5ff 100644 --- a/arch/microblaze/include/asm/processor.h +++ b/arch/microblaze/include/asm/processor.h @@ -28,4 +28,7 @@ extern char __end[]; extern char __text_start[]; +/* Microblaze board initialization function */ +void board_init(void); + #endif /* __ASM_MICROBLAZE_PROCESSOR_H */ diff --git a/arch/microblaze/lib/board.c b/arch/microblaze/lib/board.c index b80250a..674b573 100644 --- a/arch/microblaze/lib/board.c +++ b/arch/microblaze/lib/board.c @@ -32,21 +32,13 @@ #include <stdio_dev.h> #include <serial.h> #include <net.h> +#include <linux/compiler.h> #include <asm/processor.h> #include <asm/microblaze_intc.h> +#include <fdtdec.h> DECLARE_GLOBAL_DATA_PTR; -#ifdef CONFIG_SYS_GPIO_0 -extern int gpio_init (void); -#endif -#ifdef CONFIG_SYS_TIMER_0 -extern int timer_init (void); -#endif -#ifdef CONFIG_SYS_FSL_2 -extern void fsl_init2 (void); -#endif - /* * All attempts to come up with a "common" initialization sequence * that works for all boards and architectures failed: some of the @@ -63,31 +55,26 @@ typedef int (init_fnc_t) (void); init_fnc_t *init_sequence[] = { env_init, +#ifdef CONFIG_OF_CONTROL + fdtdec_check_fdt, +#endif serial_init, console_init_f, -#ifdef CONFIG_SYS_GPIO_0 - gpio_init, -#endif interrupts_init, -#ifdef CONFIG_SYS_TIMER_0 timer_init, -#endif -#ifdef CONFIG_SYS_FSL_2 - fsl_init2, -#endif NULL, }; unsigned long monitor_flash_len; -void board_init (void) +void board_init_f(ulong not_used) { bd_t *bd; init_fnc_t **init_fnc_ptr; gd = (gd_t *) (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET); bd = (bd_t *) (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET \ - GENERATED_BD_INFO_SIZE); - char *s; + __maybe_unused char *s; #if defined(CONFIG_CMD_FLASH) ulong flash_size = 0; #endif @@ -103,6 +90,17 @@ void board_init (void) monitor_flash_len = __end - __text_start; +#ifdef CONFIG_OF_EMBED + /* Get a pointer to the FDT */ + gd->fdt_blob = _binary_dt_dtb_start; +#elif defined CONFIG_OF_SEPARATE + /* FDT is at end of image */ + gd->fdt_blob = (void *)__end; +#endif + /* Allow the early environment to override the fdt address */ + gd->fdt_blob = (void *)getenv_ulong("fdtcontroladdr", 16, + (uintptr_t)gd->fdt_blob); + /* * The Malloc area is immediately below the monitor copy in DRAM * aka CONFIG_SYS_MONITOR_BASE - Note there is no need for reloc_off @@ -121,6 +119,15 @@ void board_init (void) } } +#ifdef CONFIG_OF_CONTROL + /* For now, put this check after the console is ready */ + if (fdtdec_prepare_fdt()) { + panic("** CONFIG_OF_CONTROL defined but no FDT - please see " + "doc/README.fdt-control"); + } else + printf("DTB: 0x%x\n", (u32)gd->fdt_blob); +#endif + puts ("SDRAM :\n"); printf ("\t\tIcache:%s\n", icache_status() ? "ON" : "OFF"); printf ("\t\tDcache:%s\n", dcache_status() ? "ON" : "OFF"); @@ -129,9 +136,8 @@ void board_init (void) #if defined(CONFIG_CMD_FLASH) puts ("Flash: "); bd->bi_flashstart = CONFIG_SYS_FLASH_BASE; - if (0 < (flash_size = flash_init ())) { - bd->bi_flashsize = flash_size; - bd->bi_flashoffset = CONFIG_SYS_FLASH_BASE + flash_size; + flash_size = flash_init(); + if (bd->bi_flashstart && flash_size > 0) { # ifdef CONFIG_SYS_FLASH_CHECKSUM print_size (flash_size, ""); /* @@ -142,13 +148,16 @@ void board_init (void) s = getenv ("flashchecksum"); if (s && (*s == 'y')) { printf (" CRC: %08X", - crc32 (0, (const unsigned char *) CONFIG_SYS_FLASH_BASE, flash_size) + crc32(0, (const u8 *)bd->bi_flashstart, + flash_size) ); } putc ('\n'); # else /* !CONFIG_SYS_FLASH_CHECKSUM */ print_size (flash_size, "\n"); # endif /* CONFIG_SYS_FLASH_CHECKSUM */ + bd->bi_flashsize = flash_size; + bd->bi_flashoffset = bd->bi_flashstart + flash_size; } else { puts ("Flash init FAILED"); bd->bi_flashstart = 0; @@ -169,6 +178,8 @@ void board_init (void) /* Initialize the console (after the relocation and devices init) */ console_init_r(); + board_init(); + /* Initialize from environment */ load_addr = getenv_ulong("loadaddr", 16, load_addr); diff --git a/arch/mips/config.mk b/arch/mips/config.mk index 6ab8acd..de9140b 100644 --- a/arch/mips/config.mk +++ b/arch/mips/config.mk @@ -23,7 +23,21 @@ CROSS_COMPILE ?= mips_4KC- -CONFIG_STANDALONE_LOAD_ADDR ?= 0x80200000 -T mips.lds +# Handle special prefix in ELDK 4.0 toolchain +ifneq (,$(findstring 4KCle,$(CROSS_COMPILE))) +ENDIANNESS := -EL +endif + +ifdef CONFIG_SYS_LITTLE_ENDIAN +ENDIANNESS := -EL +endif + +ifdef CONFIG_SYS_BIG_ENDIAN +ENDIANNESS := -EB +endif + +# Default to EB if no endianess is configured +ENDIANNESS ?= -EB PLATFORM_CPPFLAGS += -DCONFIG_MIPS -D__MIPS__ @@ -47,8 +61,8 @@ PLATFORM_CPPFLAGS += -DCONFIG_MIPS -D__MIPS__ # On the other hand, we want PIC in the U-Boot code to relocate it from ROM # to RAM. $28 is always used as gp. # -PLATFORM_CPPFLAGS += -G 0 -mabicalls -fpic +PLATFORM_CPPFLAGS += -G 0 -mabicalls -fpic $(ENDIANNESS) PLATFORM_CPPFLAGS += -msoft-float -PLATFORM_LDFLAGS += -G 0 -static -n -nostdlib +PLATFORM_LDFLAGS += -G 0 -static -n -nostdlib $(ENDIANNESS) PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections LDFLAGS_FINAL += --gc-sections diff --git a/arch/mips/cpu/mips32/config.mk b/arch/mips/cpu/mips32/config.mk index a1cd590..481e984 100644 --- a/arch/mips/cpu/mips32/config.mk +++ b/arch/mips/cpu/mips32/config.mk @@ -29,21 +29,6 @@ # MIPSFLAGS := -march=mips32r2 -# Handle special prefix in ELDK 4.0 toolchain -ifneq (,$(findstring 4KCle,$(CROSS_COMPILE))) -ENDIANNESS := -EL -endif +PLATFORM_CPPFLAGS += $(MIPSFLAGS) -ifdef CONFIG_SYS_LITTLE_ENDIAN -ENDIANNESS := -EL -endif - -ifdef CONFIG_SYS_BIG_ENDIAN -ENDIANNESS := -EB -endif - -# Default to EB if no endianess is configured -ENDIANNESS ?= -EB - -PLATFORM_CPPFLAGS += $(MIPSFLAGS) $(ENDIANNESS) -PLATFORM_LDFLAGS += $(ENDIANNESS) +CONFIG_STANDALONE_LOAD_ADDR ?= 0x80200000 -T mips.lds diff --git a/arch/mips/cpu/xburst/config.mk b/arch/mips/cpu/xburst/config.mk index bce0c1b..1536746 100644 --- a/arch/mips/cpu/xburst/config.mk +++ b/arch/mips/cpu/xburst/config.mk @@ -20,5 +20,6 @@ # MA 02111-1307 USA # -PLATFORM_CPPFLAGS += -march=mips32 -EL -PLATFORM_LDFLAGS += -EL +PLATFORM_CPPFLAGS += -march=mips32 + +CONFIG_STANDALONE_LOAD_ADDR ?= 0x80200000 -T mips.lds diff --git a/arch/mips/cpu/xburst/cpu.c b/arch/mips/cpu/xburst/cpu.c index e976341..ddcbfaa 100644 --- a/arch/mips/cpu/xburst/cpu.c +++ b/arch/mips/cpu/xburst/cpu.c @@ -62,7 +62,7 @@ void __attribute__((weak)) _machine_restart(void) writew(100, &wdt->tdr); /* wdt_set_data(100) */ writew(0, &wdt->tcnt); /* wdt_set_count(0); */ - writew(TCU_TSSR_WDTSC, &tcu->tscr); /* tcu_start_wdt_clock */ + writel(TCU_TSSR_WDTSC, &tcu->tscr); /* tcu_start_wdt_clock */ writeb(readb(&wdt->tcer) | WDT_TCER_TCEN, &wdt->tcer); /* wdt start */ while (1) diff --git a/arch/mips/cpu/xburst/timer.c b/arch/mips/cpu/xburst/timer.c index de6f5da..b6b3855 100644 --- a/arch/mips/cpu/xburst/timer.c +++ b/arch/mips/cpu/xburst/timer.c @@ -34,13 +34,13 @@ static struct jz4740_tcu *tcu = (struct jz4740_tcu *)JZ4740_TCU_BASE; void reset_timer_masked(void) { /* reset time */ - gd->lastinc = readw(&tcu->tcnt0); + gd->lastinc = readl(&tcu->tcnt0); gd->tbl = 0; } ulong get_timer_masked(void) { - ulong now = readw(&tcu->tcnt0); + ulong now = readl(&tcu->tcnt0); if (gd->lastinc <= now) gd->tbl += now - gd->lastinc; /* normal mode */ @@ -83,11 +83,11 @@ void udelay_masked(unsigned long usec) int timer_init(void) { - writew(TCU_TCSR_PRESCALE256 | TCU_TCSR_EXT_EN, &tcu->tcsr0); + writel(TCU_TCSR_PRESCALE256 | TCU_TCSR_EXT_EN, &tcu->tcsr0); - writew(0, &tcu->tcnt0); - writew(0, &tcu->tdhr0); - writew(TIMER_FDATA, &tcu->tdfr0); + writel(0, &tcu->tcnt0); + writel(0, &tcu->tdhr0); + writel(TIMER_FDATA, &tcu->tdfr0); /* mask irqs */ writel((1 << TIMER_CHAN) | (1 << (TIMER_CHAN + 16)), &tcu->tmsr); diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile index 9244f31..967e98a 100644 --- a/arch/mips/lib/Makefile +++ b/arch/mips/lib/Makefile @@ -25,6 +25,13 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(ARCH).o +## Build a couple of necessary functions into a private libgcc +LIBGCC = $(obj)libgcc.o +GLSOBJS += ashldi3.o +GLSOBJS += ashrdi3.o +GLSOBJS += lshrdi3.o +LGOBJS := $(addprefix $(obj),$(GLSOBJS)) + SOBJS-y += COBJS-y += board.o @@ -37,9 +44,22 @@ endif SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y)) +# Always build libmips.o +TARGETS := $(LIB) + +# Build private libgcc only when asked for +ifdef USE_PRIVATE_LIBGCC +TARGETS += $(LIBGCC) +endif + +all: $(TARGETS) + $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) +$(LIBGCC): $(obj).depend $(LGOBJS) + $(call cmd_link_o_target, $(LGOBJS)) + ######################################################################### # defines $(obj).depend target diff --git a/arch/mips/lib/ashldi3.c b/arch/mips/lib/ashldi3.c new file mode 100644 index 0000000..9b50d86 --- /dev/null +++ b/arch/mips/lib/ashldi3.c @@ -0,0 +1,25 @@ +#include "libgcc.h" + +long long __ashldi3(long long u, word_type b) +{ + DWunion uu, w; + word_type bm; + + if (b == 0) + return u; + + uu.ll = u; + bm = 32 - b; + + if (bm <= 0) { + w.s.low = 0; + w.s.high = (unsigned int) uu.s.low << -bm; + } else { + const unsigned int carries = (unsigned int) uu.s.low >> bm; + + w.s.low = (unsigned int) uu.s.low << b; + w.s.high = ((unsigned int) uu.s.high << b) | carries; + } + + return w.ll; +} diff --git a/arch/mips/lib/ashrdi3.c b/arch/mips/lib/ashrdi3.c new file mode 100644 index 0000000..f30359b --- /dev/null +++ b/arch/mips/lib/ashrdi3.c @@ -0,0 +1,27 @@ +#include "libgcc.h" + +long long __ashrdi3(long long u, word_type b) +{ + DWunion uu, w; + word_type bm; + + if (b == 0) + return u; + + uu.ll = u; + bm = 32 - b; + + if (bm <= 0) { + /* w.s.high = 1..1 or 0..0 */ + w.s.high = + uu.s.high >> 31; + w.s.low = uu.s.high >> -bm; + } else { + const unsigned int carries = (unsigned int) uu.s.high << bm; + + w.s.high = uu.s.high >> b; + w.s.low = ((unsigned int) uu.s.low >> b) | carries; + } + + return w.ll; +} diff --git a/arch/mips/lib/libgcc.h b/arch/mips/lib/libgcc.h new file mode 100644 index 0000000..05909d5 --- /dev/null +++ b/arch/mips/lib/libgcc.h @@ -0,0 +1,25 @@ +#ifndef __ASM_LIBGCC_H +#define __ASM_LIBGCC_H + +#include <asm/byteorder.h> + +typedef int word_type __attribute__ ((mode (__word__))); + +#ifdef __BIG_ENDIAN +struct DWstruct { + int high, low; +}; +#elif defined(__LITTLE_ENDIAN) +struct DWstruct { + int low, high; +}; +#else +#error I feel sick. +#endif + +typedef union { + struct DWstruct s; + long long ll; +} DWunion; + +#endif /* __ASM_LIBGCC_H */ diff --git a/arch/mips/lib/lshrdi3.c b/arch/mips/lib/lshrdi3.c new file mode 100644 index 0000000..bb340ac --- /dev/null +++ b/arch/mips/lib/lshrdi3.c @@ -0,0 +1,25 @@ +#include "libgcc.h" + +long long __lshrdi3(long long u, word_type b) +{ + DWunion uu, w; + word_type bm; + + if (b == 0) + return u; + + uu.ll = u; + bm = 32 - b; + + if (bm <= 0) { + w.s.high = 0; + w.s.low = (unsigned int) uu.s.high >> -bm; + } else { + const unsigned int carries = (unsigned int) uu.s.high << bm; + + w.s.high = (unsigned int) uu.s.high >> b; + w.s.low = ((unsigned int) uu.s.low >> b) | carries; + } + + return w.ll; +} diff --git a/board/atmel/atngw100mkii/Makefile b/board/atmel/atngw100mkii/Makefile new file mode 100644 index 0000000..7fbd20d --- /dev/null +++ b/board/atmel/atngw100mkii/Makefile @@ -0,0 +1,40 @@ +# +# Copyright (C) 2005-2006 Atmel Corporation +# +# See file CREDITS for list of people who contributed to this project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA + +include $(TOPDIR)/config.mk + +LIB := $(obj)lib$(BOARD).o + +COBJS := $(BOARD).o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/atmel/atngw100mkii/atngw100mkii.c b/board/atmel/atngw100mkii/atngw100mkii.c new file mode 100644 index 0000000..f4023b3 --- /dev/null +++ b/board/atmel/atngw100mkii/atngw100mkii.c @@ -0,0 +1,156 @@ +/* + * Copyright (C) 2010 Atmel Corporation + * + * Copyright (C) 2012 Andreas Bießmann <andreas.devel@googlemail.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> + +#include <spi.h> +#include <netdev.h> + +#include <asm/io.h> +#include <asm/sdram.h> +#include <asm/arch/clk.h> +#include <asm/arch/gpio.h> +#include <asm/arch/hmatrix.h> +#include <asm/arch/mmu.h> +#include <asm/arch/portmux.h> + +DECLARE_GLOBAL_DATA_PTR; + +struct mmu_vm_range mmu_vmr_table[CONFIG_SYS_NR_VM_REGIONS] = { + { + /* Atmel AT49BV640D 8 MiB x16 NOR flash on NCS0 */ + .virt_pgno = CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT, + .nr_pages = CONFIG_SYS_FLASH_SIZE >> PAGE_SHIFT, + .phys = (CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT) + | MMU_VMR_CACHE_NONE, + }, { + /* Micron MT29F2G16AAD 256 MiB x16 NAND flash on NCS3 */ + .virt_pgno = EBI_SRAM_CS3_BASE >> PAGE_SHIFT, + .nr_pages = EBI_SRAM_CS3_SIZE >> PAGE_SHIFT, + .phys = (EBI_SRAM_CS3_BASE >> PAGE_SHIFT) + | MMU_VMR_CACHE_NONE, + }, { + /* 2x16-bit ISSI IS42S16320B 64 MiB SDRAM (128 MiB total) */ + .virt_pgno = CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT, + .nr_pages = EBI_SDRAM_SIZE >> PAGE_SHIFT, + .phys = (CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT) + | MMU_VMR_CACHE_WRBACK, + }, +}; + +static const struct sdram_config sdram_config = { + .data_bits = SDRAM_DATA_32BIT, + .row_bits = 13, + .col_bits = 10, + .bank_bits = 2, + .cas = 3, + .twr = 2, + .trc = 7, + .trp = 2, + .trcd = 2, + .tras = 5, + .txsr = 6, + /* 7.81 us */ + .refresh_period = (781 * (SDRAMC_BUS_HZ / 1000)) / 100000, +}; + +int board_early_init_f(void) +{ + /* Enable SDRAM in the EBI mux */ + hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE) + | HMATRIX_BIT(EBI_NAND_ENABLE)); + + portmux_enable_ebi(32, 23, PORTMUX_EBI_NAND, + PORTMUX_DRIVE_HIGH); + portmux_select_gpio(PORTMUX_PORT_E, 1 << 23, + PORTMUX_DIR_OUTPUT | PORTMUX_INIT_HIGH + | PORTMUX_DRIVE_MIN); + portmux_enable_usart1(PORTMUX_DRIVE_MIN); + +#if defined(CONFIG_MACB) + portmux_enable_macb0(PORTMUX_MACB_MII, PORTMUX_DRIVE_HIGH); + portmux_enable_macb1(PORTMUX_MACB_MII, PORTMUX_DRIVE_HIGH); +#endif +#if defined(CONFIG_MMC) + portmux_enable_mmci(0, PORTMUX_MMCI_4BIT, PORTMUX_DRIVE_LOW); +#endif +#if defined(CONFIG_ATMEL_SPI) + portmux_enable_spi0(1 << 0, PORTMUX_DRIVE_LOW); +#endif + + return 0; +} + +phys_size_t initdram(int board_type) +{ + unsigned long expected_size; + unsigned long actual_size; + void *sdram_base; + + sdram_base = uncached(EBI_SDRAM_BASE); + + expected_size = sdram_init(sdram_base, &sdram_config); + actual_size = get_ram_size(sdram_base, expected_size); + + if (expected_size != actual_size) + printf("Warning: Only %lu of %lu MiB SDRAM is working\n", + actual_size >> 20, expected_size >> 20); + + return actual_size; +} + +int board_early_init_r(void) +{ + gd->bd->bi_phy_id[0] = 0x01; + gd->bd->bi_phy_id[1] = 0x03; + return 0; +} + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bi) +{ + macb_eth_initialize(0, (void *)ATMEL_BASE_MACB0, bi->bi_phy_id[0]); + macb_eth_initialize(1, (void *)ATMEL_BASE_MACB1, bi->bi_phy_id[1]); + return 0; +} +#endif + +/* SPI chip select control */ +#ifdef CONFIG_ATMEL_SPI +#define ATNGW100_DATAFLASH_CS_PIN GPIO_PIN_PA(3) + +int spi_cs_is_valid(unsigned int bus, unsigned int cs) +{ + return bus == 0 && cs == 0; +} + +void spi_cs_activate(struct spi_slave *slave) +{ + gpio_set_value(ATNGW100_DATAFLASH_CS_PIN, 0); +} + +void spi_cs_deactivate(struct spi_slave *slave) +{ + gpio_set_value(ATNGW100_DATAFLASH_CS_PIN, 1); +} +#endif /* CONFIG_ATMEL_SPI */ diff --git a/board/qi/qi_lb60/qi_lb60.c b/board/qi/qi_lb60/qi_lb60.c index 3583d01..d975209 100644 --- a/board/qi/qi_lb60/qi_lb60.c +++ b/board/qi/qi_lb60/qi_lb60.c @@ -69,7 +69,7 @@ static void gpio_init(void) static void cpm_init(void) { struct jz4740_cpm *cpm = (struct jz4740_cpm *)JZ4740_CPM_BASE; - uint32_t reg = readw(&cpm->clkgr); + uint32_t reg = readl(&cpm->clkgr); reg |= CPM_CLKGR_IPU | CPM_CLKGR_CIM | @@ -81,7 +81,7 @@ static void cpm_init(void) CPM_CLKGR_UDC | CPM_CLKGR_AIC1; - writew(reg, &cpm->clkgr); + writel(reg, &cpm->clkgr); } int board_early_init_f(void) diff --git a/board/samsung/common/Makefile b/board/samsung/common/Makefile new file mode 100644 index 0000000..0bcd594 --- /dev/null +++ b/board/samsung/common/Makefile @@ -0,0 +1,43 @@ +# +# Copyright (C) 2012 Samsung Electronics +# Lukasz Majewski <l.majewski@samsung.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)libsamsung.o + +COBJS-$(CONFIG_SOFT_I2C_MULTI_BUS) += multi_i2c.o + +SRCS := $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/samsung/common/multi_i2c.c b/board/samsung/common/multi_i2c.c new file mode 100644 index 0000000..d6c3d37 --- /dev/null +++ b/board/samsung/common/multi_i2c.c @@ -0,0 +1,65 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * Lukasz Majewski <l.majewski@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <i2c.h> + +/* Handle multiple I2C buses instances */ +int get_multi_scl_pin(void) +{ + unsigned int bus = I2C_GET_BUS(); + + switch (bus) { + case I2C_0: /* I2C_0 definition - compatibility layer */ + case I2C_5: + return CONFIG_SOFT_I2C_I2C5_SCL; + case I2C_9: + return CONFIG_SOFT_I2C_I2C9_SCL; + default: + printf("I2C_%d not supported!\n", bus); + }; + + return 0; +} + +int get_multi_sda_pin(void) +{ + unsigned int bus = I2C_GET_BUS(); + + switch (bus) { + case I2C_0: /* I2C_0 definition - compatibility layer */ + case I2C_5: + return CONFIG_SOFT_I2C_I2C5_SDA; + case I2C_9: + return CONFIG_SOFT_I2C_I2C9_SDA; + default: + printf("I2C_%d not supported!\n", bus); + }; + + return 0; +} + +int multi_i2c_init(void) +{ + return 0; +} diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c index 4f9cb5a..e11a892 100644 --- a/board/samsung/trats/trats.c +++ b/board/samsung/trats/trats.c @@ -75,6 +75,21 @@ int board_init(void) return 0; } +void i2c_init_board(void) +{ + struct exynos4_gpio_part1 *gpio1 = + (struct exynos4_gpio_part1 *)samsung_get_base_gpio_part1(); + struct exynos4_gpio_part2 *gpio2 = + (struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2(); + + /* I2C_5 -> PMIC */ + s5p_gpio_direction_output(&gpio1->b, 7, 1); + s5p_gpio_direction_output(&gpio1->b, 6, 1); + /* I2C_9 -> FG */ + s5p_gpio_direction_output(&gpio2->y4, 0, 1); + s5p_gpio_direction_output(&gpio2->y4, 1, 1); +} + int dram_init(void) { gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE) + diff --git a/board/xilinx/microblaze-generic/microblaze-generic.c b/board/xilinx/microblaze-generic/microblaze-generic.c index a1e2bfe..b75e62c 100644 --- a/board/xilinx/microblaze-generic/microblaze-generic.c +++ b/board/xilinx/microblaze-generic/microblaze-generic.c @@ -28,6 +28,7 @@ #include <common.h> #include <config.h> #include <netdev.h> +#include <asm/processor.h> #include <asm/microblaze_intc.h> #include <asm/asm.h> @@ -69,6 +70,14 @@ int fsl_init2 (void) { } #endif +void board_init(void) +{ + gpio_init(); +#ifdef CONFIG_SYS_FSL_2 + fsl_init2(); +#endif +} + int board_eth_init(bd_t *bis) { int ret = 0; @@ -302,6 +302,7 @@ tec arm armv7:arm720t tec avionic paz00 arm armv7:arm720t paz00 compal tegra20 trimslice arm armv7:arm720t trimslice compulab tegra20 atngw100 avr32 at32ap - atmel at32ap700x +atngw100mkii avr32 at32ap - atmel at32ap700x atstk1002 avr32 at32ap atstk1000 atmel at32ap700x atstk1003 avr32 at32ap atstk1000 atmel at32ap700x atstk1004 avr32 at32ap atstk1000 atmel at32ap700x @@ -389,7 +390,8 @@ M5485FFE m68k mcf547x_8x m548xevb freescale - M5485GFE m68k mcf547x_8x m548xevb freescale - M5485EVB:SYS_BUSCLK=100000000,SYS_BOOTSZ=4,SYS_DRAMSZ=64 M5485HFE m68k mcf547x_8x m548xevb freescale - M5485EVB:SYS_BUSCLK=100000000,SYS_BOOTSZ=2,SYS_DRAMSZ=64,SYS_NOR1SZ=16,SYS_VIDEO microblaze-generic microblaze microblaze microblaze-generic xilinx -qemu_mips mips mips32 qemu-mips - - qemu-mips +qemu_mips mips mips32 qemu-mips - - qemu-mips:SYS_BIG_ENDIAN +qemu_mipsel mips mips32 qemu-mips - - qemu-mips:SYS_LITTLE_ENDIAN vct_platinum mips mips32 vct micronas - vct:VCT_PLATINUM vct_platinumavc mips mips32 vct micronas - vct:VCT_PLATINUMAVC vct_platinumavc_onenand mips mips32 vct micronas - vct:VCT_PLATINUMAVC,VCT_ONENAND diff --git a/common/cmd_fdt.c b/common/cmd_fdt.c index 9a5c53e..e2225c4 100644 --- a/common/cmd_fdt.c +++ b/common/cmd_fdt.c @@ -114,10 +114,21 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) } } + return CMD_RET_SUCCESS; + } + + if (!working_fdt) { + puts( + "No FDT memory address configured. Please configure\n" + "the FDT address via \"fdt addr <address>\" command.\n" + "Aborting!\n"); + return CMD_RET_FAILURE; + } + /* * Move the working_fdt */ - } else if (strncmp(argv[1], "mo", 2) == 0) { + if (strncmp(argv[1], "mo", 2) == 0) { struct fdt_header *newaddr; int len; int err; diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c index 750509d..79a1088 100644 --- a/common/cmd_mmc.c +++ b/common/cmd_mmc.c @@ -144,8 +144,7 @@ int do_mmcinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) U_BOOT_CMD( mmcinfo, 1, 0, do_mmcinfo, "display MMC info", - " - device number of the device to dislay info of\n" - "" + "- dislay info of the current MMC device" ); int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) diff --git a/common/dlmalloc.c b/common/dlmalloc.c index c645d73..1d7e527 100644 --- a/common/dlmalloc.c +++ b/common/dlmalloc.c @@ -1487,11 +1487,11 @@ static mbinptr av_[NAV * 2 + 2] = { #ifdef CONFIG_NEEDS_MANUAL_RELOC void malloc_bin_reloc (void) { - unsigned long *p = (unsigned long *)(&av_[2]); - int i; - for (i=2; i<(sizeof(av_)/sizeof(mbinptr)); ++i) { - *p++ += gd->reloc_off; - } + mbinptr *p = &av_[2]; + size_t i; + + for (i = 2; i < ARRAY_SIZE(av_); ++i, ++p) + *p = (mbinptr)((ulong)*p + gd->reloc_off); } #endif diff --git a/common/env_mmc.c b/common/env_mmc.c index be2f2be..a2ff90b 100644 --- a/common/env_mmc.c +++ b/common/env_mmc.c @@ -75,9 +75,28 @@ static int init_mmc_for_env(struct mmc *mmc) return -1; } +#ifdef CONFIG_SYS_MMC_ENV_PART + if (CONFIG_SYS_MMC_ENV_PART != mmc->part_num) { + if (mmc_switch_part(CONFIG_SYS_MMC_ENV_DEV, + CONFIG_SYS_MMC_ENV_PART)) { + puts("MMC partition switch failed\n"); + return -1; + } + } +#endif + return 0; } +static void fini_mmc_for_env(struct mmc *mmc) +{ +#ifdef CONFIG_SYS_MMC_ENV_PART + if (CONFIG_SYS_MMC_ENV_PART != mmc->part_num) + mmc_switch_part(CONFIG_SYS_MMC_ENV_DEV, + mmc->part_num); +#endif +} + #ifdef CONFIG_CMD_SAVEENV static inline int write_env(struct mmc *mmc, unsigned long size, unsigned long offset, const void *buffer) @@ -100,26 +119,38 @@ int saveenv(void) char *res; struct mmc *mmc = find_mmc_device(CONFIG_SYS_MMC_ENV_DEV); u32 offset; + int ret; - if (init_mmc_for_env(mmc) || mmc_get_env_addr(mmc, &offset)) + if (init_mmc_for_env(mmc)) return 1; + if (mmc_get_env_addr(mmc, &offset)) { + ret = 1; + goto fini; + } + res = (char *)&env_new->data; len = hexport_r(&env_htab, '\0', &res, ENV_SIZE, 0, NULL); if (len < 0) { error("Cannot export environment: errno = %d\n", errno); - return 1; + ret = 1; + goto fini; } env_new->crc = crc32(0, &env_new->data[0], ENV_SIZE); printf("Writing to MMC(%d)... ", CONFIG_SYS_MMC_ENV_DEV); if (write_env(mmc, CONFIG_ENV_SIZE, offset, (u_char *)env_new)) { puts("failed\n"); - return 1; + ret = 1; + goto fini; } puts("done\n"); - return 0; + ret = 0; + +fini: + fini_mmc_for_env(mmc); + return ret; } #endif /* CONFIG_CMD_SAVEENV */ @@ -143,13 +174,30 @@ void env_relocate_spec(void) ALLOC_CACHE_ALIGN_BUFFER(char, buf, CONFIG_ENV_SIZE); struct mmc *mmc = find_mmc_device(CONFIG_SYS_MMC_ENV_DEV); u32 offset; + int ret; - if (init_mmc_for_env(mmc) || mmc_get_env_addr(mmc, &offset)) - return set_default_env(NULL); + if (init_mmc_for_env(mmc)) { + ret = 1; + goto err; + } - if (read_env(mmc, CONFIG_ENV_SIZE, offset, buf)) - return set_default_env(NULL); + if (mmc_get_env_addr(mmc, &offset)) { + ret = 1; + goto fini; + } + + if (read_env(mmc, CONFIG_ENV_SIZE, offset, buf)) { + ret = 1; + goto fini; + } env_import(buf, 1); + ret = 0; + +fini: + fini_mmc_for_env(mmc); +err: + if (ret) + set_default_env(NULL); #endif } diff --git a/drivers/block/systemace.c b/drivers/block/systemace.c index 58402b9..247cf06 100644 --- a/drivers/block/systemace.c +++ b/drivers/block/systemace.c @@ -51,24 +51,36 @@ * to be the base address for the chip, usually in the local * peripheral bus. */ -#if (CONFIG_SYS_SYSTEMACE_WIDTH == 8) + +static u32 base = CONFIG_SYS_SYSTEMACE_BASE; +static u32 width = CONFIG_SYS_SYSTEMACE_WIDTH; + +static void ace_writew(u16 val, unsigned off) +{ + if (width == 8) { #if !defined(__BIG_ENDIAN) -#define ace_readw(off) ((readb(CONFIG_SYS_SYSTEMACE_BASE+off)<<8) | \ - (readb(CONFIG_SYS_SYSTEMACE_BASE+off+1))) -#define ace_writew(val, off) {writeb(val>>8, CONFIG_SYS_SYSTEMACE_BASE+off); \ - writeb(val, CONFIG_SYS_SYSTEMACE_BASE+off+1);} + writeb(val >> 8, base + off); + writeb(val, base + off + 1); #else -#define ace_readw(off) ((readb(CONFIG_SYS_SYSTEMACE_BASE+off)) | \ - (readb(CONFIG_SYS_SYSTEMACE_BASE+off+1)<<8)) -#define ace_writew(val, off) {writeb(val, CONFIG_SYS_SYSTEMACE_BASE+off); \ - writeb(val>>8, CONFIG_SYS_SYSTEMACE_BASE+off+1);} + writeb(val, base + off); + writeb(val >> 8, base + off + 1); #endif + } + out16(base + off, val); +} + +static u16 ace_readw(unsigned off) +{ + if (width == 8) { +#if !defined(__BIG_ENDIAN) + return (readb(base + off) << 8) | readb(base + off + 1); #else -#define ace_readw(off) (in16(CONFIG_SYS_SYSTEMACE_BASE+off)) -#define ace_writew(val, off) (out16(CONFIG_SYS_SYSTEMACE_BASE+off,val)) + return readb(base + off) | (readb(base + off + 1) << 8); #endif + } -/* */ + return in16(base + off); +} static unsigned long systemace_read(int dev, unsigned long start, unsigned long blkcnt, void *buffer); @@ -121,7 +133,7 @@ block_dev_desc_t *systemace_get_dev(int dev) /* * Ensure the correct bus mode (8/16 bits) gets enabled */ - ace_writew(CONFIG_SYS_SYSTEMACE_WIDTH == 8 ? 0 : 0x0001, 0); + ace_writew(width == 8 ? 0 : 0x0001, 0); init_part(&systemace_dev); diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c index 978507b..094305f 100644 --- a/drivers/i2c/omap24xx_i2c.c +++ b/drivers/i2c/omap24xx_i2c.c @@ -442,6 +442,14 @@ int i2c_set_bus_num(unsigned int bus) return -1; } +#if I2C_BUS_MAX == 4 + if (bus == 3) + i2c_base = (struct i2c *)I2C_BASE4; + else + if (bus == 2) + i2c_base = (struct i2c *)I2C_BASE3; + else +#endif #if I2C_BUS_MAX == 3 if (bus == 2) i2c_base = (struct i2c *)I2C_BASE3; diff --git a/drivers/mmc/arm_pl180_mmci.c b/drivers/mmc/arm_pl180_mmci.c index db2c7ab..af1380a 100644 --- a/drivers/mmc/arm_pl180_mmci.c +++ b/drivers/mmc/arm_pl180_mmci.c @@ -52,7 +52,7 @@ static int wait_for_command_end(struct mmc *dev, struct mmc_cmd *cmd) debug("CMD%d time out\n", cmd->cmdidx); return TIMEOUT; } else if ((hoststatus & SDI_STA_CCRCFAIL) && - (cmd->flags & MMC_RSP_CRC)) { + (cmd->resp_type & MMC_RSP_CRC)) { printf("CMD%d CRC error\n", cmd->cmdidx); return -EILSEQ; } diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index fa673cf..a60cfe1 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -236,7 +236,7 @@ int mmc_send_status(struct mmc *mmc, int timeout) status = (cmd.response[0] & MMC_STATUS_CURR_STATE) >> 9; printf("CURR STATE:%d\n", status); #endif - if (!timeout) { + if (timeout <= 0) { printf("Timeout waiting card ready\n"); return TIMEOUT; } @@ -658,7 +658,7 @@ int mmc_send_op_cond(struct mmc *mmc) } -int mmc_send_ext_csd(struct mmc *mmc, char *ext_csd) +int mmc_send_ext_csd(struct mmc *mmc, u8 *ext_csd) { struct mmc_cmd cmd; struct mmc_data data; @@ -669,7 +669,7 @@ int mmc_send_ext_csd(struct mmc *mmc, char *ext_csd) cmd.resp_type = MMC_RSP_R1; cmd.cmdarg = 0; - data.dest = ext_csd; + data.dest = (char *)ext_csd; data.blocks = 1; data.blocksize = 512; data.flags = MMC_DATA_READ; @@ -704,7 +704,7 @@ int mmc_switch(struct mmc *mmc, u8 set, u8 index, u8 value) int mmc_change_freq(struct mmc *mmc) { - ALLOC_CACHE_ALIGN_BUFFER(char, ext_csd, 512); + ALLOC_CACHE_ALIGN_BUFFER(u8, ext_csd, 512); char cardtype; int err; @@ -963,8 +963,8 @@ int mmc_startup(struct mmc *mmc) uint mult, freq; u64 cmult, csize, capacity; struct mmc_cmd cmd; - ALLOC_CACHE_ALIGN_BUFFER(char, ext_csd, 512); - ALLOC_CACHE_ALIGN_BUFFER(char, test_csd, 512); + ALLOC_CACHE_ALIGN_BUFFER(u8, ext_csd, 512); + ALLOC_CACHE_ALIGN_BUFFER(u8, test_csd, 512); int timeout = 1000; #ifdef CONFIG_MMC_SPI_CRC_ON @@ -1137,7 +1137,8 @@ int mmc_startup(struct mmc *mmc) } /* store the partition info of emmc */ - if (ext_csd[EXT_CSD_PARTITIONING_SUPPORT] & PART_SUPPORT) + if ((ext_csd[EXT_CSD_PARTITIONING_SUPPORT] & PART_SUPPORT) || + ext_csd[EXT_CSD_BOOT_MULT]) mmc->part_config = ext_csd[EXT_CSD_PART_CONF]; } @@ -1232,7 +1233,9 @@ int mmc_startup(struct mmc *mmc) (mmc->cid[1] >> 8) & 0xff, mmc->cid[1] & 0xff); sprintf(mmc->block_dev.revision, "%d.%d", mmc->cid[2] >> 28, (mmc->cid[2] >> 24) & 0xf); +#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_LIBDISK_SUPPORT) init_part(&mmc->block_dev); +#endif return 0; } @@ -1283,10 +1286,9 @@ int mmc_register(struct mmc *mmc) block_dev_desc_t *mmc_get_dev(int dev) { struct mmc *mmc = find_mmc_device(dev); - if (!mmc) + if (!mmc || mmc_init(mmc)) return NULL; - mmc_init(mmc); return &mmc->block_dev; } #endif diff --git a/drivers/mmc/pxa_mmc_gen.c b/drivers/mmc/pxa_mmc_gen.c index 2c5bf17..b3ec441 100644 --- a/drivers/mmc/pxa_mmc_gen.c +++ b/drivers/mmc/pxa_mmc_gen.c @@ -118,7 +118,7 @@ static int pxa_mmc_start_cmd(struct mmc *mmc, struct mmc_cmd *cmd, int ret; /* The card can send a "busy" response */ - if (cmd->flags & MMC_RSP_BUSY) + if (cmd->resp_type & MMC_RSP_BUSY) cmdat |= MMC_CMDAT_BUSY; /* Inform the controller about response type */ @@ -181,9 +181,11 @@ static int pxa_mmc_cmd_done(struct mmc *mmc, struct mmc_cmd *cmd) /* The command response didn't arrive */ if (stat & MMC_STAT_TIME_OUT_RESPONSE) return -ETIMEDOUT; - else if (stat & MMC_STAT_RES_CRC_ERROR && cmd->flags & MMC_RSP_CRC) { + else if (stat & MMC_STAT_RES_CRC_ERROR + && cmd->resp_type & MMC_RSP_CRC) { #ifdef PXAMMC_CRC_SKIP - if (cmd->flags & MMC_RSP_136 && cmd->response[0] & (1 << 31)) + if (cmd->resp_type & MMC_RSP_136 + && cmd->response[0] & (1 << 31)) printf("Ignoring CRC, this may be dangerous!\n"); else #endif diff --git a/drivers/mmc/s5p_sdhci.c b/drivers/mmc/s5p_sdhci.c index 1d4481b..b978236 100644 --- a/drivers/mmc/s5p_sdhci.c +++ b/drivers/mmc/s5p_sdhci.c @@ -21,6 +21,7 @@ #include <malloc.h> #include <sdhci.h> #include <asm/arch/mmc.h> +#include <asm/arch/clk.h> static char *S5P_NAME = "SAMSUNG SDHCI"; static void s5p_sdhci_set_control_reg(struct sdhci_host *host) @@ -54,7 +55,7 @@ static void s5p_sdhci_set_control_reg(struct sdhci_host *host) * 00 = Delay3 (inverter delay) * 10 = Delay4 (inverter delay + 2ns) */ - val = SDHCI_CTRL3_FCSEL3 | SDHCI_CTRL3_FCSEL1; + val = SDHCI_CTRL3_FCSEL0 | SDHCI_CTRL3_FCSEL1; sdhci_writel(host, val, SDHCI_CONTROL3); /* @@ -69,7 +70,7 @@ static void s5p_sdhci_set_control_reg(struct sdhci_host *host) sdhci_writel(host, ctrl, SDHCI_CONTROL2); } -int s5p_sdhci_init(u32 regbase, u32 max_clk, u32 min_clk, u32 quirks) +int s5p_sdhci_init(u32 regbase, int index, int bus_width) { struct sdhci_host *host = NULL; host = (struct sdhci_host *)malloc(sizeof(struct sdhci_host)); @@ -80,19 +81,18 @@ int s5p_sdhci_init(u32 regbase, u32 max_clk, u32 min_clk, u32 quirks) host->name = S5P_NAME; host->ioaddr = (void *)regbase; - host->quirks = quirks; - host->quirks |= SDHCI_QUIRK_NO_HISPD_BIT | SDHCI_QUIRK_BROKEN_VOLTAGE; + host->quirks = SDHCI_QUIRK_NO_HISPD_BIT | SDHCI_QUIRK_BROKEN_VOLTAGE | + SDHCI_QUIRK_BROKEN_R1B | SDHCI_QUIRK_32BIT_DMA_ADDR; host->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; - if (quirks & SDHCI_QUIRK_REG32_RW) - host->version = sdhci_readl(host, SDHCI_HOST_VERSION - 2) >> 16; - else - host->version = sdhci_readw(host, SDHCI_HOST_VERSION); + host->version = sdhci_readw(host, SDHCI_HOST_VERSION); host->set_control_reg = &s5p_sdhci_set_control_reg; + host->set_clock = set_mmc_clk; + host->index = index; host->host_caps = MMC_MODE_HC; - add_sdhci(host, max_clk, min_clk); + add_sdhci(host, 52000000, 400000); return 0; } diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c index 1709643..2e3c408 100644 --- a/drivers/mmc/sdhci.c +++ b/drivers/mmc/sdhci.c @@ -260,7 +260,7 @@ static int sdhci_set_clock(struct mmc *mmc, unsigned int clock) if (clock == 0) return 0; - if (host->version >= SDHCI_SPEC_300) { + if ((host->version & SDHCI_SPEC_VER_MASK) >= SDHCI_SPEC_300) { /* Version 3.00 divisors must be a multiple of 2. */ if (mmc->f_max <= clock) div = 1; @@ -279,6 +279,9 @@ static int sdhci_set_clock(struct mmc *mmc, unsigned int clock) } div >>= 1; + if (host->set_clock) + host->set_clock(host->index, div); + clk = (div & SDHCI_DIV_MASK) << SDHCI_DIVIDER_SHIFT; clk |= ((div & SDHCI_DIV_HI_MASK) >> SDHCI_DIV_MASK_LEN) << SDHCI_DIVIDER_HI_SHIFT; @@ -347,10 +350,10 @@ void sdhci_set_ios(struct mmc *mmc) ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL); if (mmc->bus_width == 8) { ctrl &= ~SDHCI_CTRL_4BITBUS; - if (host->version >= SDHCI_SPEC_300) + if ((host->version & SDHCI_SPEC_VER_MASK) >= SDHCI_SPEC_300) ctrl |= SDHCI_CTRL_8BITBUS; } else { - if (host->version >= SDHCI_SPEC_300) + if ((host->version & SDHCI_SPEC_VER_MASK) >= SDHCI_SPEC_300) ctrl &= ~SDHCI_CTRL_8BITBUS; if (mmc->bus_width == 4) ctrl |= SDHCI_CTRL_4BITBUS; @@ -381,12 +384,25 @@ int sdhci_init(struct mmc *mmc) } } + sdhci_set_power(host, fls(mmc->voltages) - 1); + + if (host->quirks & SDHCI_QUIRK_NO_CD) { + unsigned int status; + + sdhci_writel(host, SDHCI_CTRL_CD_TEST_INS | SDHCI_CTRL_CD_TEST, + SDHCI_HOST_CONTROL); + + status = sdhci_readl(host, SDHCI_PRESENT_STATE); + while ((!(status & SDHCI_CARD_PRESENT)) || + (!(status & SDHCI_CARD_STATE_STABLE)) || + (!(status & SDHCI_CARD_DETECT_PIN_LEVEL))) + status = sdhci_readl(host, SDHCI_PRESENT_STATE); + } + /* Eable all state */ sdhci_writel(host, SDHCI_INT_ALL_MASK, SDHCI_INT_ENABLE); sdhci_writel(host, SDHCI_INT_ALL_MASK, SDHCI_SIGNAL_ENABLE); - sdhci_set_power(host, fls(mmc->voltages) - 1); - return 0; } @@ -421,7 +437,7 @@ int add_sdhci(struct sdhci_host *host, u32 max_clk, u32 min_clk) if (max_clk) mmc->f_max = max_clk; else { - if (host->version >= SDHCI_SPEC_300) + if ((host->version & SDHCI_SPEC_VER_MASK) >= SDHCI_SPEC_300) mmc->f_max = (caps & SDHCI_CLOCK_V3_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT; else @@ -436,7 +452,7 @@ int add_sdhci(struct sdhci_host *host, u32 max_clk, u32 min_clk) if (min_clk) mmc->f_min = min_clk; else { - if (host->version >= SDHCI_SPEC_300) + if ((host->version & SDHCI_SPEC_VER_MASK) >= SDHCI_SPEC_300) mmc->f_min = mmc->f_max / SDHCI_MAX_DIV_SPEC_300; else mmc->f_min = mmc->f_max / SDHCI_MAX_DIV_SPEC_200; diff --git a/drivers/mmc/sh_mmcif.c b/drivers/mmc/sh_mmcif.c index 2835e24..4588568 100644 --- a/drivers/mmc/sh_mmcif.c +++ b/drivers/mmc/sh_mmcif.c @@ -593,7 +593,7 @@ int mmcif_mmc_init(void) mmc->f_max = CLKDEV_EMMC_DATA; mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34; mmc->host_caps = MMC_MODE_HS | MMC_MODE_HS_52MHz | MMC_MODE_4BIT | - MMC_MODE_8BIT; + MMC_MODE_8BIT | MMC_MODE_HC; memcpy(mmc->name, DRIVER_NAME, sizeof(DRIVER_NAME)); mmc->send_cmd = sh_mmcif_request; mmc->set_ios = sh_mmcif_set_ios; diff --git a/drivers/serial/serial_xuartlite.c b/drivers/serial/serial_xuartlite.c index 3a38f9e..2bdb68b 100644 --- a/drivers/serial/serial_xuartlite.c +++ b/drivers/serial/serial_xuartlite.c @@ -89,11 +89,17 @@ int uartlite_serial_tstc(const int port) return in_be32(®s->status) & SR_RX_FIFO_VALID_DATA; } +static int uartlite_serial_init(const int port) +{ + if (userial_ports[port]) + return 0; + return -1; +} + #if !defined(CONFIG_SERIAL_MULTI) int serial_init(void) { - /* FIXME: Nothing for now. We should initialize fifo, etc */ - return 0; + return uartlite_serial_init(0); } void serial_setbrg(void) @@ -126,7 +132,7 @@ int serial_tstc(void) /* Multi serial device functions */ #define DECLARE_ESERIAL_FUNCTIONS(port) \ int userial##port##_init(void) \ - { return(0); } \ + { return uartlite_serial_init(port); } \ void userial##port##_setbrg(void) {} \ int userial##port##_getc(void) \ { return uartlite_serial_getc(port); } \ @@ -163,17 +169,15 @@ struct serial_device uartlite_serial3_device = __weak struct serial_device *default_serial_console(void) { -# ifdef XILINX_UARTLITE_BASEADDR - return &uartlite_serial0_device; -# endif /* XILINX_UARTLITE_BASEADDR */ -# ifdef XILINX_UARTLITE_BASEADDR1 - return &uartlite_serial1_device; -# endif /* XILINX_UARTLITE_BASEADDR1 */ -# ifdef XILINX_UARTLITE_BASEADDR2 - return &uartlite_serial2_device; -# endif /* XILINX_UARTLITE_BASEADDR2 */ -# ifdef XILINX_UARTLITE_BASEADDR3 - return &uartlite_serial3_device; -# endif /* XILINX_UARTLITE_BASEADDR3 */ + if (userial_ports[0]) + return &uartlite_serial0_device; + if (userial_ports[1]) + return &uartlite_serial1_device; + if (userial_ports[2]) + return &uartlite_serial2_device; + if (userial_ports[3]) + return &uartlite_serial3_device; + + return NULL; } #endif /* CONFIG_SERIAL_MULTI */ diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c index e563c19..52a4134 100644 --- a/drivers/spi/xilinx_spi.c +++ b/drivers/spi/xilinx_spi.c @@ -78,7 +78,6 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, unsigned int max_hz, unsigned int mode) { struct xilinx_spi_slave *xilspi; - struct xilinx_spi_reg *regs; if (!spi_cs_is_valid(bus, cs)) { printf("XILSPI error: %s: unsupported bus %d / cs %d\n", diff --git a/fs/ubifs/ubifs.c b/fs/ubifs/ubifs.c index c68802b..44be3f5 100644 --- a/fs/ubifs/ubifs.c +++ b/fs/ubifs/ubifs.c @@ -37,8 +37,8 @@ DECLARE_GLOBAL_DATA_PTR; static int gzip_decompress(const unsigned char *in, size_t in_len, unsigned char *out, size_t *out_len) { - unsigned long len = in_len; - return zunzip(out, *out_len, (unsigned char *)in, &len, 0, 0); + return zunzip(out, *out_len, (unsigned char *)in, + (unsigned long *)out_len, 0, 0); } /* Fake description object for the "none" compressor */ diff --git a/include/configs/atngw100mkii.h b/include/configs/atngw100mkii.h new file mode 100644 index 0000000..f85374f --- /dev/null +++ b/include/configs/atngw100mkii.h @@ -0,0 +1,209 @@ +/* + * Copyright (C) 2006 Atmel Corporation + * + * Copyright (C) 2012 Andreas Bießmann <andreas.devel@googlemail.com> + * + * Configuration settings for the AVR32 Network Gateway + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/arch/hardware.h> + +#define CONFIG_AVR32 +#define CONFIG_AT32AP +#define CONFIG_AT32AP7000 +#define CONFIG_ATNGW100MKII + +/* + * Timer clock frequency. We're using the CPU-internal COUNT register + * for this, so this is equivalent to the CPU core clock frequency + */ +#define CONFIG_SYS_HZ 1000 + +/* + * Set up the PLL to run at 140 MHz, the CPU to run at the PLL + * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency + * and the PBA bus to run at 1/4 the PLL frequency. + */ +#define CONFIG_PLL +#define CONFIG_SYS_POWER_MANAGER +#define CONFIG_SYS_OSC0_HZ 20000000 +#define CONFIG_SYS_PLL0_DIV 1 +#define CONFIG_SYS_PLL0_MUL 7 +#define CONFIG_SYS_PLL0_SUPPRESS_CYCLES 16 +/* + * Set the CPU running at: + * PLL / (2^CONFIG_SYS_CLKDIV_CPU) = CPU MHz + */ +#define CONFIG_SYS_CLKDIV_CPU 0 +/* + * Set the HSB running at: + * PLL / (2^CONFIG_SYS_CLKDIV_HSB) = HSB MHz + */ +#define CONFIG_SYS_CLKDIV_HSB 1 +/* + * Set the PBA running at: + * PLL / (2^CONFIG_SYS_CLKDIV_PBA) = PBA MHz + */ +#define CONFIG_SYS_CLKDIV_PBA 2 +/* + * Set the PBB running at: + * PLL / (2^CONFIG_SYS_CLKDIV_PBB) = PBB MHz + */ +#define CONFIG_SYS_CLKDIV_PBB 1 + +/* Reserve VM regions for NOR flash, NAND flash and SDRAM */ +#define CONFIG_SYS_NR_VM_REGIONS 3 + +/* + * The PLLOPT register controls the PLL like this: + * icp = PLLOPT<2> + * ivco = PLLOPT<1:0> + * + * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz). + */ +#define CONFIG_SYS_PLL0_OPT 0x04 + +#define CONFIG_USART_BASE ATMEL_BASE_USART1 +#define CONFIG_USART_ID 1 + +/* User serviceable stuff */ +#define CONFIG_DOS_PARTITION + +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG + +#define CONFIG_STACKSIZE (2048) + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_BOOTARGS \ + "root=mtd:main rootfstype=jffs2" +#define CONFIG_BOOTCOMMAND \ + "fsload 0x10400000 /uImage; bootm" + +/* + * Only interrupt autoboot if <space> is pressed. Otherwise, garbage + * data on the serial line may interrupt the boot sequence. + */ +#define CONFIG_BOOTDELAY 1 +#define CONFIG_AUTOBOOT +#define CONFIG_AUTOBOOT_KEYED +#define CONFIG_AUTOBOOT_PROMPT \ + "Press SPACE to abort autoboot in %d seconds\n", bootdelay +#define CONFIG_AUTOBOOT_DELAY_STR "d" +#define CONFIG_AUTOBOOT_STOP_STR " " + +/* + * After booting the board for the first time, new ethernet addresses + * should be generated and assigned to the environment variables + * "ethaddr" and "eth1addr". This is normally done during production. + */ +#define CONFIG_OVERWRITE_ETHADDR_ONCE +#define CONFIG_NET_MULTI + +/* + * BOOTP/DHCP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MMC +#define CONFIG_CMD_SF +#define CONFIG_CMD_SPI +#define CONFIG_CMD_MII + +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_SETGETDCR +#undef CONFIG_CMD_XIMG + +#define CONFIG_ATMEL_USART +#define CONFIG_MACB +#define CONFIG_PORTMUX_PIO +#define CONFIG_SYS_NR_PIOS 5 +#define CONFIG_SYS_HSDRAMC +#define CONFIG_MMC +#define CONFIG_GENERIC_ATMEL_MCI +#define CONFIG_GENERIC_MMC +#define CONFIG_SYS_MMC_MAX_BLK_COUNT 1 +#define CONFIG_ATMEL_SPI + +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_ATMEL + +#define CONFIG_SYS_DCACHE_LINESZ 32 +#define CONFIG_SYS_ICACHE_LINESZ 32 + +#define CONFIG_NR_DRAM_BANKS 1 + +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_PROTECTION + +#define CONFIG_SYS_FLASH_BASE 0x00000000 +#define CONFIG_SYS_FLASH_SIZE 0x800000 +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_MAX_FLASH_SECT 135 + +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE + +#define CONFIG_SYS_INTRAM_BASE INTERNAL_SRAM_BASE +#define CONFIG_SYS_INTRAM_SIZE INTERNAL_SRAM_SIZE +#define CONFIG_SYS_SDRAM_BASE EBI_SDRAM_BASE + +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_SIZE 65536 +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE - CONFIG_ENV_SIZE) + +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE) + +#define CONFIG_SYS_MALLOC_LEN (256*1024) +#define CONFIG_SYS_DMA_ALLOC_LEN (16384) + +/* Allow 4MB for the kernel run-time image */ +#define CONFIG_SYS_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000) +#define CONFIG_SYS_BOOTPARAMS_LEN (16 * 1024) + +/* Other configuration settings that shouldn't have to change all that often */ +#define CONFIG_SYS_PROMPT "U-Boot> " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_LONGHELP + +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x1f00000) + +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS + +#endif /* __CONFIG_H */ diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index 1266cf7..721cd90 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -115,19 +115,11 @@ #endif /* timer */ -#ifdef XILINX_TIMER_BASEADDR -# if (XILINX_TIMER_IRQ != -1) -# define CONFIG_SYS_TIMER_0 1 +#if defined(XILINX_TIMER_BASEADDR) && defined(XILINX_TIMER_IRQ) # define CONFIG_SYS_TIMER_0_ADDR XILINX_TIMER_BASEADDR # define CONFIG_SYS_TIMER_0_IRQ XILINX_TIMER_IRQ -# define FREQUENCE XILINX_CLOCK_FREQ -# define CONFIG_SYS_TIMER_0_PRELOAD ( FREQUENCE/1000 ) -# endif -#elif XILINX_CLOCK_FREQ -# define CONFIG_XILINX_CLOCK_FREQ XILINX_CLOCK_FREQ -#else -# error BAD CLOCK FREQ #endif + /* FSL */ /* #define CONFIG_SYS_FSL_2 */ /* #define FSL_INTR_2 1 */ diff --git a/include/configs/paz00.h b/include/configs/paz00.h index 0eb9f3b..99b8753 100644 --- a/include/configs/paz00.h +++ b/include/configs/paz00.h @@ -51,8 +51,9 @@ /* Environment in eMMC, at the end of 2nd "boot sector" */ #define CONFIG_ENV_IS_IN_MMC -#define CONFIG_ENV_OFFSET ((2 * 1024 * 1024) - CONFIG_ENV_SIZE) +#define CONFIG_ENV_OFFSET ((1024 * 1024) - CONFIG_ENV_SIZE) #define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_SYS_MMC_ENV_PART 2 /* USB Host support */ #define CONFIG_USB_EHCI diff --git a/include/configs/qemu-mips.h b/include/configs/qemu-mips.h index 306c173..b8b9705 100644 --- a/include/configs/qemu-mips.h +++ b/include/configs/qemu-mips.h @@ -100,7 +100,12 @@ */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "qemu-mips # " /* Monitor Command Prompt */ +/* Monitor Command Prompt */ +#if defined(CONFIG_SYS_LITTLE_ENDIAN) +#define CONFIG_SYS_PROMPT "qemu-mipsel # " +#else +#define CONFIG_SYS_PROMPT "qemu-mips # " +#endif #define CONFIG_AUTO_COMPLETE #define CONFIG_CMDLINE_EDITING diff --git a/include/configs/qi_lb60.h b/include/configs/qi_lb60.h index a3fc465..4bb5bbc 100644 --- a/include/configs/qi_lb60.h +++ b/include/configs/qi_lb60.h @@ -11,6 +11,7 @@ #define __CONFIG_QI_LB60_H #define CONFIG_MIPS32 /* MIPS32 CPU core */ +#define CONFIG_SYS_LITTLE_ENDIAN #define CONFIG_JZSOC /* Jz SoC */ #define CONFIG_JZ4740 /* Jz4740 SoC */ #define CONFIG_NAND_JZ4740 diff --git a/include/configs/seaboard.h b/include/configs/seaboard.h index afc4a85..8dc6d4b 100644 --- a/include/configs/seaboard.h +++ b/include/configs/seaboard.h @@ -77,8 +77,9 @@ /* Environment in eMMC, at the end of 2nd "boot sector" */ #define CONFIG_ENV_IS_IN_MMC -#define CONFIG_ENV_OFFSET ((2 * 512 * 1024) - CONFIG_ENV_SIZE) +#define CONFIG_ENV_OFFSET ((512 * 1024) - CONFIG_ENV_SIZE) #define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_SYS_MMC_ENV_PART 2 /* USB Host support */ #define CONFIG_USB_EHCI diff --git a/include/configs/trats.h b/include/configs/trats.h index f8da9c01..b3b5a3d 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -78,6 +78,7 @@ #define CONFIG_MMC #define CONFIG_S5P_SDHCI #define CONFIG_SDHCI +#define CONFIG_MMC_SDMA /* PWM */ #define CONFIG_PWM @@ -211,18 +212,28 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_CACHELINE_SIZE 32 -#include <asm/arch/gpio.h> -/* - * I2C Settings - */ -#define CONFIG_SOFT_I2C_GPIO_SCL exynos4_gpio_part1_get_nr(b, 7) -#define CONFIG_SOFT_I2C_GPIO_SDA exynos4_gpio_part1_get_nr(b, 6) #define CONFIG_SOFT_I2C #define CONFIG_SOFT_I2C_READ_REPEATED_START +#define CONFIG_SYS_I2C_INIT_BOARD #define CONFIG_SYS_I2C_SPEED 50000 #define CONFIG_I2C_MULTI_BUS -#define CONFIG_SYS_MAX_I2C_BUS 7 +#define CONFIG_SOFT_I2C_MULTI_BUS +#define CONFIG_SYS_MAX_I2C_BUS 15 + +#include <asm/arch/gpio.h> + +/* I2C PMIC */ +#define CONFIG_SOFT_I2C_I2C5_SCL exynos4_gpio_part1_get_nr(b, 7) +#define CONFIG_SOFT_I2C_I2C5_SDA exynos4_gpio_part1_get_nr(b, 6) + +/* I2C FG */ +#define CONFIG_SOFT_I2C_I2C9_SCL exynos4_gpio_part2_get_nr(y4, 1) +#define CONFIG_SOFT_I2C_I2C9_SDA exynos4_gpio_part2_get_nr(y4, 0) + +#define CONFIG_SOFT_I2C_GPIO_SCL get_multi_scl_pin() +#define CONFIG_SOFT_I2C_GPIO_SDA get_multi_sda_pin() +#define I2C_INIT multi_i2c_init() #define CONFIG_PMIC #define CONFIG_PMIC_I2C diff --git a/include/configs/ventana.h b/include/configs/ventana.h index 25ec2eb..f5e1bf8 100644 --- a/include/configs/ventana.h +++ b/include/configs/ventana.h @@ -58,8 +58,9 @@ /* Environment in eMMC, at the end of 2nd "boot sector" */ #define CONFIG_ENV_IS_IN_MMC -#define CONFIG_ENV_OFFSET ((2 * 1024 * 1024) - CONFIG_ENV_SIZE) +#define CONFIG_ENV_OFFSET ((1024 * 1024) - CONFIG_ENV_SIZE) #define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_SYS_MMC_ENV_PART 2 /* USB Host support */ #define CONFIG_USB_EHCI diff --git a/include/configs/whistler.h b/include/configs/whistler.h index b747d0e..3235718 100644 --- a/include/configs/whistler.h +++ b/include/configs/whistler.h @@ -72,8 +72,9 @@ * particular card is standard practice as far as I know. */ #define CONFIG_ENV_IS_IN_MMC -#define CONFIG_ENV_OFFSET ((2 * 512 * 1024) - CONFIG_ENV_SIZE) +#define CONFIG_ENV_OFFSET ((512 * 1024) - CONFIG_ENV_SIZE) #define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_SYS_MMC_ENV_PART 2 /* USB Host support */ #define CONFIG_USB_EHCI diff --git a/include/i2c.h b/include/i2c.h index 1f35acf..16f099d 100644 --- a/include/i2c.h +++ b/include/i2c.h @@ -250,4 +250,16 @@ static inline void I2C_SET_BUS(unsigned int bus) i2c_set_bus_num(bus); } +/* Multi I2C definitions */ +enum { + I2C_0, I2C_1, I2C_2, I2C_3, I2C_4, I2C_5, I2C_6, I2C_7, + I2C_8, I2C_9, I2C_10, +}; + +/* Multi I2C busses handling */ +#ifdef CONFIG_SOFT_I2C_MULTI_BUS +extern int get_multi_scl_pin(void); +extern int get_multi_sda_pin(void); +extern int multi_i2c_init(void); +#endif #endif /* _I2C_H_ */ diff --git a/include/mmc.h b/include/mmc.h index 7b094a4..a13e2bd 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -160,6 +160,7 @@ #define EXT_CSD_CARD_TYPE 196 /* RO */ #define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */ #define EXT_CSD_HC_ERASE_GRP_SIZE 224 /* RO */ +#define EXT_CSD_BOOT_MULT 226 /* RO */ /* * EXT_CSD field definitions diff --git a/include/sdhci.h b/include/sdhci.h index 9d37183..c0345ed 100644 --- a/include/sdhci.h +++ b/include/sdhci.h @@ -76,6 +76,8 @@ #define SDHCI_SPACE_AVAILABLE 0x00000400 #define SDHCI_DATA_AVAILABLE 0x00000800 #define SDHCI_CARD_PRESENT 0x00010000 +#define SDHCI_CARD_STATE_STABLE 0x00020000 +#define SDHCI_CARD_DETECT_PIN_LEVEL 0x00040000 #define SDHCI_WRITE_PROTECT 0x00080000 #define SDHCI_HOST_CONTROL 0x28 @@ -87,7 +89,9 @@ #define SDHCI_CTRL_ADMA1 0x08 #define SDHCI_CTRL_ADMA32 0x10 #define SDHCI_CTRL_ADMA64 0x18 -#define SDHCI_CTRL_8BITBUS 0x20 +#define SDHCI_CTRL_8BITBUS 0x20 +#define SDHCI_CTRL_CD_TEST_INS 0x40 +#define SDHCI_CTRL_CD_TEST 0x80 #define SDHCI_POWER_CONTROL 0x29 #define SDHCI_POWER_ON 0x01 @@ -219,6 +223,7 @@ #define SDHCI_QUIRK_BROKEN_R1B (1 << 2) #define SDHCI_QUIRK_NO_HISPD_BIT (1 << 3) #define SDHCI_QUIRK_BROKEN_VOLTAGE (1 << 4) +#define SDHCI_QUIRK_NO_CD (1 << 5) /* to make gcc happy */ struct sdhci_host; @@ -248,8 +253,10 @@ struct sdhci_host { unsigned int clock; struct mmc *mmc; const struct sdhci_ops *ops; + int index; void (*set_control_reg)(struct sdhci_host *host); + void (*set_clock)(int dev_index, unsigned int div); uint voltages; }; diff --git a/include/serial.h b/include/serial.h index cbdf8a9..d76d6df 100644 --- a/include/serial.h +++ b/include/serial.h @@ -31,7 +31,8 @@ extern struct serial_device *default_serial_console(void); defined(CONFIG_MB86R0x) || defined(CONFIG_MPC5xxx) || \ defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) || \ defined(CONFIG_MPC86xx) || defined(CONFIG_SYS_SC520) || \ - defined(CONFIG_TEGRA20) || defined(CONFIG_SYS_COREBOOT) + defined(CONFIG_TEGRA20) || defined(CONFIG_SYS_COREBOOT) || \ + defined(CONFIG_MICROBLAZE) extern struct serial_device serial0_device; extern struct serial_device serial1_device; #if defined(CONFIG_SYS_NS16550_SERIAL) |