summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/serial/Makefile5
-rw-r--r--drivers/serial/serial_pl01x.c300
-rw-r--r--drivers/serial/serial_pl01x_internal.h (renamed from drivers/serial/serial_pl01x.h)0
-rw-r--r--include/serial_pl01x.h27
4 files changed, 192 insertions, 140 deletions
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index b4f299b..17c56ea 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -7,8 +7,11 @@
ifdef CONFIG_DM_SERIAL
obj-y += serial-uclass.o
+obj-$(CONFIG_PL01X_SERIAL) += serial_pl01x.o
else
obj-y += serial.o
+obj-$(CONFIG_PL010_SERIAL) += serial_pl01x.o
+obj-$(CONFIG_PL011_SERIAL) += serial_pl01x.o
obj-$(CONFIG_SYS_NS16550_SERIAL) += serial_ns16550.o
endif
@@ -25,8 +28,6 @@ obj-$(CONFIG_IMX_SERIAL) += serial_imx.o
obj-$(CONFIG_KS8695_SERIAL) += serial_ks8695.o
obj-$(CONFIG_MAX3100_SERIAL) += serial_max3100.o
obj-$(CONFIG_MXC_UART) += serial_mxc.o
-obj-$(CONFIG_PL010_SERIAL) += serial_pl01x.o
-obj-$(CONFIG_PL011_SERIAL) += serial_pl01x.o
obj-$(CONFIG_PXA_SERIAL) += serial_pxa.o
obj-$(CONFIG_SA1100_SERIAL) += serial_sa1100.o
obj-$(CONFIG_S3C24X0_SERIAL) += serial_s3c24x0.o
diff --git a/drivers/serial/serial_pl01x.c b/drivers/serial/serial_pl01x.c
index dfb610e..665a0e4 100644
--- a/drivers/serial/serial_pl01x.c
+++ b/drivers/serial/serial_pl01x.c
@@ -12,125 +12,86 @@
/* Simple U-Boot driver for the PrimeCell PL010/PL011 UARTs */
#include <common.h>
+#include <errno.h>
#include <watchdog.h>
#include <asm/io.h>
#include <serial.h>
+#include <serial_pl01x.h>
#include <linux/compiler.h>
-#include "serial_pl01x.h"
+#include "serial_pl01x_internal.h"
-/*
- * Integrator AP has two UARTs, we use the first one, at 38400-8-N-1
- * Integrator CP has two UARTs, use the first one, at 38400-8-N-1
- * Versatile PB has four UARTs.
- */
-#define CONSOLE_PORT CONFIG_CONS_INDEX
static volatile unsigned char *const port[] = CONFIG_PL01x_PORTS;
+static enum pl01x_type pl01x_type __attribute__ ((section(".data")));
+static struct pl01x_regs *base_regs __attribute__ ((section(".data")));
#define NUM_PORTS (sizeof(port)/sizeof(port[0]))
-static void pl01x_putc (int portnum, char c);
-static int pl01x_getc (int portnum);
-static int pl01x_tstc (int portnum);
-unsigned int baudrate = CONFIG_BAUDRATE;
DECLARE_GLOBAL_DATA_PTR;
-static struct pl01x_regs *pl01x_get_regs(int portnum)
+static int pl01x_putc(struct pl01x_regs *regs, char c)
{
- return (struct pl01x_regs *) port[portnum];
-}
-
-#ifdef CONFIG_PL010_SERIAL
-
-static int pl01x_serial_init(void)
-{
- struct pl01x_regs *regs = pl01x_get_regs(CONSOLE_PORT);
- unsigned int divisor;
-
- /* First, disable everything */
- writel(0, &regs->pl010_cr);
+ /* Wait until there is space in the FIFO */
+ if (readl(&regs->fr) & UART_PL01x_FR_TXFF)
+ return -EAGAIN;
- /* Set baud rate */
- switch (baudrate) {
- case 9600:
- divisor = UART_PL010_BAUD_9600;
- break;
+ /* Send the character */
+ writel(c, &regs->dr);
- case 19200:
- divisor = UART_PL010_BAUD_9600;
- break;
+ return 0;
+}
- case 38400:
- divisor = UART_PL010_BAUD_38400;
- break;
+static int pl01x_getc(struct pl01x_regs *regs)
+{
+ unsigned int data;
- case 57600:
- divisor = UART_PL010_BAUD_57600;
- break;
+ /* Wait until there is data in the FIFO */
+ if (readl(&regs->fr) & UART_PL01x_FR_RXFE)
+ return -EAGAIN;
- case 115200:
- divisor = UART_PL010_BAUD_115200;
- break;
+ data = readl(&regs->dr);
- default:
- divisor = UART_PL010_BAUD_38400;
+ /* Check for an error flag */
+ if (data & 0xFFFFFF00) {
+ /* Clear the error */
+ writel(0xFFFFFFFF, &regs->ecr);
+ return -1;
}
- writel((divisor & 0xf00) >> 8, &regs->pl010_lcrm);
- writel(divisor & 0xff, &regs->pl010_lcrl);
-
- /* Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled */
- writel(UART_PL010_LCRH_WLEN_8 | UART_PL010_LCRH_FEN, &regs->pl010_lcrh);
-
- /* Finally, enable the UART */
- writel(UART_PL010_CR_UARTEN, &regs->pl010_cr);
-
- return 0;
+ return (int) data;
}
-#endif /* CONFIG_PL010_SERIAL */
-
-#ifdef CONFIG_PL011_SERIAL
+static int pl01x_tstc(struct pl01x_regs *regs)
+{
+ WATCHDOG_RESET();
+ return !(readl(&regs->fr) & UART_PL01x_FR_RXFE);
+}
-static int pl01x_serial_init(void)
+static int pl01x_generic_serial_init(struct pl01x_regs *regs,
+ enum pl01x_type type)
{
- struct pl01x_regs *regs = pl01x_get_regs(CONSOLE_PORT);
- unsigned int temp;
- unsigned int divider;
- unsigned int remainder;
- unsigned int fraction;
unsigned int lcr;
#ifdef CONFIG_PL011_SERIAL_FLUSH_ON_INIT
- /* Empty RX fifo if necessary */
- if (readl(&regs->pl011_cr) & UART_PL011_CR_UARTEN) {
- while (!(readl(&regs->fr) & UART_PL01x_FR_RXFE))
- readl(&regs->dr);
+ if (type == TYPE_PL011) {
+ /* Empty RX fifo if necessary */
+ if (readl(&regs->pl011_cr) & UART_PL011_CR_UARTEN) {
+ while (!(readl(&regs->fr) & UART_PL01x_FR_RXFE))
+ readl(&regs->dr);
+ }
}
#endif
/* First, disable everything */
- writel(0, &regs->pl011_cr);
-
- /*
- * Set baud rate
- *
- * IBRD = UART_CLK / (16 * BAUD_RATE)
- * FBRD = RND((64 * MOD(UART_CLK,(16 * BAUD_RATE))) / (16 * BAUD_RATE))
- */
- temp = 16 * baudrate;
- divider = CONFIG_PL011_CLOCK / temp;
- remainder = CONFIG_PL011_CLOCK % temp;
- temp = (8 * remainder) / baudrate;
- fraction = (temp >> 1) + (temp & 1);
-
- writel(divider, &regs->pl011_ibrd);
- writel(fraction, &regs->pl011_fbrd);
+ writel(0, &regs->pl010_cr);
/* Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled */
lcr = UART_PL011_LCRH_WLEN_8 | UART_PL011_LCRH_FEN;
writel(lcr, &regs->pl011_lcrh);
+ switch (type) {
+ case TYPE_PL010:
+ break;
+ case TYPE_PL011: {
#ifdef CONFIG_PL011_SERIAL_RLCR
- {
int i;
/*
@@ -144,90 +105,151 @@ static int pl01x_serial_init(void)
writel(lcr, &regs->pl011_rlcr);
/* lcrh needs to be set again for change to be effective */
writel(lcr, &regs->pl011_lcrh);
- }
#endif
- /* Finally, enable the UART */
- writel(UART_PL011_CR_UARTEN | UART_PL011_CR_TXE | UART_PL011_CR_RXE |
- UART_PL011_CR_RTS, &regs->pl011_cr);
+ break;
+ }
+ default:
+ return -EINVAL;
+ }
return 0;
}
-#endif /* CONFIG_PL011_SERIAL */
-
-static void pl01x_serial_putc(const char c)
+static int pl01x_generic_setbrg(struct pl01x_regs *regs, enum pl01x_type type,
+ int clock, int baudrate)
{
- if (c == '\n')
- pl01x_putc (CONSOLE_PORT, '\r');
+ switch (type) {
+ case TYPE_PL010: {
+ unsigned int divisor;
+
+ switch (baudrate) {
+ case 9600:
+ divisor = UART_PL010_BAUD_9600;
+ break;
+ case 19200:
+ divisor = UART_PL010_BAUD_9600;
+ break;
+ case 38400:
+ divisor = UART_PL010_BAUD_38400;
+ break;
+ case 57600:
+ divisor = UART_PL010_BAUD_57600;
+ break;
+ case 115200:
+ divisor = UART_PL010_BAUD_115200;
+ break;
+ default:
+ divisor = UART_PL010_BAUD_38400;
+ }
+
+ writel((divisor & 0xf00) >> 8, &regs->pl010_lcrm);
+ writel(divisor & 0xff, &regs->pl010_lcrl);
+
+ /* Finally, enable the UART */
+ writel(UART_PL010_CR_UARTEN, &regs->pl010_cr);
+ break;
+ }
+ case TYPE_PL011: {
+ unsigned int temp;
+ unsigned int divider;
+ unsigned int remainder;
+ unsigned int fraction;
- pl01x_putc (CONSOLE_PORT, c);
-}
+ /*
+ * Set baud rate
+ *
+ * IBRD = UART_CLK / (16 * BAUD_RATE)
+ * FBRD = RND((64 * MOD(UART_CLK,(16 * BAUD_RATE)))
+ * / (16 * BAUD_RATE))
+ */
+ temp = 16 * baudrate;
+ divider = clock / temp;
+ remainder = clock % temp;
+ temp = (8 * remainder) / baudrate;
+ fraction = (temp >> 1) + (temp & 1);
+
+ writel(divider, &regs->pl011_ibrd);
+ writel(fraction, &regs->pl011_fbrd);
+
+ /* Finally, enable the UART */
+ writel(UART_PL011_CR_UARTEN | UART_PL011_CR_TXE |
+ UART_PL011_CR_RXE | UART_PL011_CR_RTS, &regs->pl011_cr);
+ break;
+ }
+ default:
+ return -EINVAL;
+ }
-static int pl01x_serial_getc(void)
-{
- return pl01x_getc (CONSOLE_PORT);
+ return 0;
}
-static int pl01x_serial_tstc(void)
+#ifndef CONFIG_DM_SERIAL
+static void pl01x_serial_init_baud(int baudrate)
{
- return pl01x_tstc (CONSOLE_PORT);
+ int clock = 0;
+
+#if defined(CONFIG_PL010_SERIAL)
+ pl01x_type = TYPE_PL010;
+#elif defined(CONFIG_PL011_SERIAL)
+ pl01x_type = TYPE_PL011;
+ clock = CONFIG_PL011_CLOCK;
+#endif
+ base_regs = (struct pl01x_regs *)port[CONFIG_CONS_INDEX];
+
+ pl01x_generic_serial_init(base_regs, pl01x_type);
+ pl01x_generic_setbrg(base_regs, TYPE_PL010, clock, baudrate);
}
-static void pl01x_serial_setbrg(void)
+/*
+ * Integrator AP has two UARTs, we use the first one, at 38400-8-N-1
+ * Integrator CP has two UARTs, use the first one, at 38400-8-N-1
+ * Versatile PB has four UARTs.
+ */
+int pl01x_serial_init(void)
{
- struct pl01x_regs *regs = pl01x_get_regs(CONSOLE_PORT);
+ pl01x_serial_init_baud(CONFIG_BAUDRATE);
- baudrate = gd->baudrate;
- /*
- * Flush FIFO and wait for non-busy before changing baudrate to avoid
- * crap in console
- */
- while (!(readl(&regs->fr) & UART_PL01x_FR_TXFE))
- WATCHDOG_RESET();
- while (readl(&regs->fr) & UART_PL01x_FR_BUSY)
- WATCHDOG_RESET();
- serial_init();
+ return 0;
}
-static void pl01x_putc (int portnum, char c)
+static void pl01x_serial_putc(const char c)
{
- struct pl01x_regs *regs = pl01x_get_regs(portnum);
-
- /* Wait until there is space in the FIFO */
- while (readl(&regs->fr) & UART_PL01x_FR_TXFF)
- WATCHDOG_RESET();
+ if (c == '\n')
+ while (pl01x_putc(base_regs, '\r') == -EAGAIN);
- /* Send the character */
- writel(c, &regs->dr);
+ while (pl01x_putc(base_regs, c) == -EAGAIN);
}
-static int pl01x_getc (int portnum)
+static int pl01x_serial_getc(void)
{
- struct pl01x_regs *regs = pl01x_get_regs(portnum);
- unsigned int data;
+ while (1) {
+ int ch = pl01x_getc(base_regs);
- /* Wait until there is data in the FIFO */
- while (readl(&regs->fr) & UART_PL01x_FR_RXFE)
- WATCHDOG_RESET();
+ if (ch == -EAGAIN) {
+ WATCHDOG_RESET();
+ continue;
+ }
- data = readl(&regs->dr);
-
- /* Check for an error flag */
- if (data & 0xFFFFFF00) {
- /* Clear the error */
- writel(0xFFFFFFFF, &regs->ecr);
- return -1;
+ return ch;
}
-
- return (int) data;
}
-static int pl01x_tstc (int portnum)
+static int pl01x_serial_tstc(void)
{
- struct pl01x_regs *regs = pl01x_get_regs(portnum);
+ return pl01x_tstc(base_regs);
+}
- WATCHDOG_RESET();
- return !(readl(&regs->fr) & UART_PL01x_FR_RXFE);
+static void pl01x_serial_setbrg(void)
+{
+ /*
+ * Flush FIFO and wait for non-busy before changing baudrate to avoid
+ * crap in console
+ */
+ while (!(readl(&base_regs->fr) & UART_PL01x_FR_TXFE))
+ WATCHDOG_RESET();
+ while (readl(&base_regs->fr) & UART_PL01x_FR_BUSY)
+ WATCHDOG_RESET();
+ pl01x_serial_init_baud(gd->baudrate);
}
static struct serial_device pl01x_serial_drv = {
@@ -250,3 +272,5 @@ __weak struct serial_device *default_serial_console(void)
{
return &pl01x_serial_drv;
}
+
+#endif /* nCONFIG_DM_SERIAL */
diff --git a/drivers/serial/serial_pl01x.h b/drivers/serial/serial_pl01x_internal.h
index 288a4f1..288a4f1 100644
--- a/drivers/serial/serial_pl01x.h
+++ b/drivers/serial/serial_pl01x_internal.h
diff --git a/include/serial_pl01x.h b/include/serial_pl01x.h
new file mode 100644
index 0000000..5e068f3
--- /dev/null
+++ b/include/serial_pl01x.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (c) 2014 Google, Inc
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __serial_pl01x_h
+#define __serial_pl01x_h
+
+enum pl01x_type {
+ TYPE_PL010,
+ TYPE_PL011,
+};
+
+/*
+ *Information about a serial port
+ *
+ * @base: Register base address
+ * @type: Port type
+ * @clock: Input clock rate, used for calculating the baud rate divisor
+ */
+struct pl01x_serial_platdata {
+ unsigned long base;
+ enum pl01x_type type;
+ unsigned int clock;
+};
+
+#endif