diff options
| -rw-r--r-- | arch/powerpc/cpu/mpc8xx/Kconfig | 4 | ||||
| -rw-r--r-- | board/flagadm/Kconfig | 11 | ||||
| -rw-r--r-- | board/flagadm/MAINTAINERS | 6 | ||||
| -rw-r--r-- | board/flagadm/Makefile | 8 | ||||
| -rw-r--r-- | board/flagadm/flagadm.c | 134 | ||||
| -rw-r--r-- | board/flagadm/flash.c | 687 | ||||
| -rw-r--r-- | board/flagadm/u-boot.lds | 82 | ||||
| -rw-r--r-- | board/flagadm/u-boot.lds.debug | 121 | ||||
| -rw-r--r-- | configs/FLAGADM_defconfig | 3 | ||||
| -rw-r--r-- | doc/README.scrapyard | 1 | ||||
| -rw-r--r-- | include/commproc.h | 21 | ||||
| -rw-r--r-- | include/configs/FLAGADM.h | 296 |
12 files changed, 1 insertions, 1373 deletions
diff --git a/arch/powerpc/cpu/mpc8xx/Kconfig b/arch/powerpc/cpu/mpc8xx/Kconfig index d5cec1f..2c39244 100644 --- a/arch/powerpc/cpu/mpc8xx/Kconfig +++ b/arch/powerpc/cpu/mpc8xx/Kconfig @@ -14,9 +14,6 @@ config TARGET_COGENT_MPC8XX config TARGET_ESTEEM192E bool "Support ESTEEM192E" -config TARGET_FLAGADM - bool "Support FLAGADM" - config TARGET_HERMES bool "Support hermes" @@ -127,7 +124,6 @@ source "board/cogent/Kconfig" source "board/eltec/mhpc/Kconfig" source "board/emk/top860/Kconfig" source "board/esteem192e/Kconfig" -source "board/flagadm/Kconfig" source "board/hermes/Kconfig" source "board/icu862/Kconfig" source "board/ip860/Kconfig" diff --git a/board/flagadm/Kconfig b/board/flagadm/Kconfig deleted file mode 100644 index bc0657e..0000000 --- a/board/flagadm/Kconfig +++ /dev/null @@ -1,11 +0,0 @@ -if TARGET_FLAGADM - -config SYS_BOARD - string - default "flagadm" - -config SYS_CONFIG_NAME - string - default "FLAGADM" - -endif diff --git a/board/flagadm/MAINTAINERS b/board/flagadm/MAINTAINERS deleted file mode 100644 index 606989c..0000000 --- a/board/flagadm/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -FLAGADM BOARD -M: Kári Davíðsson <kd@flaga.is> -S: Orphan (since 2014-06) -F: board/flagadm/ -F: include/configs/FLAGADM.h -F: configs/FLAGADM_defconfig diff --git a/board/flagadm/Makefile b/board/flagadm/Makefile deleted file mode 100644 index f2377c8..0000000 --- a/board/flagadm/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = flagadm.o flash.o diff --git a/board/flagadm/flagadm.c b/board/flagadm/flagadm.c deleted file mode 100644 index 343cb77..0000000 --- a/board/flagadm/flagadm.c +++ /dev/null @@ -1,134 +0,0 @@ -/* - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <mpc8xx.h> - -#define _NOT_USED_ 0xFFFFFFFF - -/*Orginal table, GPL4 disabled*/ -const uint sdram_table[] = -{ - /* single read (offset 0x00 in upm ram) */ - 0x1f07cc04, 0xeeaeec04, 0x11adcc04, 0xefbbac00, - 0x1ff74c47, - /* Precharge */ - 0x1FF74C05, - _NOT_USED_, - _NOT_USED_, - /* burst read (offset 0x08 in upm ram) */ - 0x1f07cc04, 0xeeaeec04, 0x00adcc04, 0x00afcc00, - 0x00afcc00, 0x01afcc00, 0x0fbb8c00, 0x1ff74c47, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* single write (offset 0x18 in upm ram) */ - 0x1f27cc04, 0xeeaeac00, 0x01b90c04, 0x1ff74c47, - /* Load moderegister */ - 0x1FF74C34, /*Precharge*/ - 0xEFEA8C34, /*NOP*/ - 0x1FB54C35, /*Load moderegister*/ - _NOT_USED_, - - /* burst write (offset 0x20 in upm ram) */ - 0x1f07cc04, 0xeeaeac00, 0x00ad4c00, 0x00afcc00, - 0x00afcc00, 0x01bb8c04, 0x1ff74c47, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* refresh (offset 0x30 in upm ram) */ - 0x1ff5cc84, 0xffffec04, 0xffffec04, 0xffffec04, - 0xffffec84, 0xffffec07, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* exception (offset 0x3C in upm ram) */ - 0x7fffec07, _NOT_USED_, _NOT_USED_, _NOT_USED_, -}; - -/* GPL5 driven every cycle */ -/* the display and the DSP */ -const uint dsp_disp_table[] = -{ - /* single read (offset 0x00 in upm ram) */ - 0xffffc80c, 0xffffc004, 0x0fffc004, 0x0fffd004, - 0x0fffc000, 0x0fffc004, 0x3fffc004, 0xffffcc05, - /* burst read (offset 0x08 in upm ram) */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* single write (offset 0x18 in upm ram) */ - 0xffffcc0c, 0xffffc004, 0x0fffc004, 0x0fffd004, - 0x0fffc000, 0x0fffc004, 0x7fffc004, 0xfffffc05, - /* burst write (offset 0x20 in upm ram) */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* refresh (offset 0x30 in upm ram) */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* exception (offset 0x3C in upm ram) */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, -}; - -int checkboard (void) -{ - puts ("Board: FlagaDM V3.0\n"); - return 0; -} - -phys_size_t initdram (int board_type) -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - long int size_b0; - - memctl->memc_or2 = CONFIG_SYS_OR2; - memctl->memc_br2 = CONFIG_SYS_BR2; - - udelay(100); - upmconfig(UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint)); - - memctl->memc_mptpr = MPTPR_PTP_DIV16; - memctl->memc_mamr = CONFIG_SYS_MAMR_48_SDR | MAMR_TLFA_1X; - - /*Do the initialization of the SDRAM*/ - /*Start with the precharge cycle*/ - memctl->memc_mcr = (MCR_OP_RUN | MCR_UPM_A | MCR_MB_CS2 | \ - MCR_MLCF(1) | MCR_MAD(0x5)); - - /*Then we need two refresh cycles*/ - memctl->memc_mamr = CONFIG_SYS_MAMR_48_SDR | MAMR_TLFA_2X; - memctl->memc_mcr = (MCR_OP_RUN | MCR_UPM_A | MCR_MB_CS2 | \ - MCR_MLCF(2) | MCR_MAD(0x30)); - - /*Mode register programming*/ - memctl->memc_mar = 0x00000088; /*CAS Latency = 2 and burst length = 4*/ - memctl->memc_mcr = (MCR_OP_RUN | MCR_UPM_A | MCR_MB_CS2 | \ - MCR_MLCF(1) | MCR_MAD(0x1C)); - - /* That should do it, just enable the periodic refresh in burst of 4*/ - memctl->memc_mamr = CONFIG_SYS_MAMR_48_SDR | MAMR_TLFA_4X; - memctl->memc_mamr |= (MAMR_PTAE | MAMR_GPL_A4DIS); - - size_b0 = 16*1024*1024; - - /* - * No bank 1 or 3 - * invalidate bank - */ - memctl->memc_br1 = 0; - memctl->memc_br3 = 0; - - upmconfig(UPMB, (uint *)dsp_disp_table, sizeof(dsp_disp_table)/sizeof(uint)); - - memctl->memc_mbmr = MBMR_GPL_B4DIS; - - memctl->memc_or4 = CONFIG_SYS_OR4; - memctl->memc_br4 = CONFIG_SYS_BR4; - - return (size_b0); -} diff --git a/board/flagadm/flash.c b/board/flagadm/flash.c deleted file mode 100644 index 46a2c9a..0000000 --- a/board/flagadm/flash.c +++ /dev/null @@ -1,687 +0,0 @@ -/* - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <mpc8xx.h> -#include <flash.h> - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/*----------------------------------------------------------------------- - * Functions - */ -ulong flash_recognize (vu_long *base); -int write_word (flash_info_t *info, ulong dest, ulong data); -void flash_get_geometry (vu_long *base, flash_info_t *info); -void flash_unprotect(flash_info_t *info); -int _flash_real_protect(flash_info_t *info, long idx, int on); - - -unsigned long flash_init (void) -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - int i; - int rec; - - for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) { - flash_info[i].flash_id = FLASH_UNKNOWN; - } - - *((vu_short*)CONFIG_SYS_FLASH_BASE) = 0xffff; - - flash_get_geometry ((vu_long*)CONFIG_SYS_FLASH_BASE, &flash_info[0]); - - /* Remap FLASH according to real size */ - memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-flash_info[0].size & 0xFFFF8000); - memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | - (memctl->memc_br0 & ~(BR_BA_MSK)); - - rec = flash_recognize((vu_long*)CONFIG_SYS_FLASH_BASE); - - if (rec == FLASH_UNKNOWN) { - printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", - flash_info[0].size, flash_info[0].size<<20); - } - -#if CONFIG_SYS_FLASH_PROTECTION - /*Unprotect all the flash memory*/ - flash_unprotect(&flash_info[0]); -#endif - - *((vu_short*)CONFIG_SYS_FLASH_BASE) = 0xffff; - - return (flash_info[0].size); - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE - /* monitor protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1, - &flash_info[0]); -#endif - -#ifdef CONFIG_ENV_IS_IN_FLASH - /* ENV protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_ENV_OFFSET, - CONFIG_ENV_OFFSET+CONFIG_ENV_SIZE-1, - &flash_info[0]); -#endif - return (flash_info[0].size); -} - - -int flash_get_protect_status(flash_info_t * info, long idx) -{ - vu_short * base; - ushort res; - -#ifdef DEBUG - printf("\n Attempting to set protection info with %d sectors\n", info->sector_count); -#endif - - - base = (vu_short*)info->start[idx]; - - *(base) = 0xffff; - - *(base + 0x55) = 0x0098; - res = base[0x2]; - - *(base) = 0xffff; - - if(res != 0) - res = 1; - else - res = 0; - - return res; -} - -void flash_get_geometry (vu_long *base, flash_info_t *info) -{ - int i,j; - ulong ner = 0; - vu_short * sb = (vu_short*)base; - ulong offset = (ulong)base; - - /* Read Device geometry */ - - *sb = 0xffff; - - *sb = 0x0090; - - info->flash_id = ((ulong)base[0x0]); -#ifdef DEBUG - printf("Id is %x\n", (uint)(ulong)info->flash_id); -#endif - - *sb = 0xffff; - - *(sb+0x55) = 0x0098; - - info->size = 1 << (sb[0x27]); /* Read flash size */ - -#ifdef DEBUG - printf("Size is %x\n", (uint)(ulong)info->size); -#endif - - *sb = 0xffff; - - *(sb + 0x55) = 0x0098; - ner = sb[0x2c] ; /*Number of erase regions*/ - -#ifdef DEBUG - printf("Number of erase regions %x\n", (uint)ner); -#endif - - info->sector_count = 0; - - for(i = 0; i < ner; i++) - { - uint s; - uint count; - uint t1,t2,t3,t4; - - *sb = 0xffff; - - *(sb + 0x55) = 0x0098; - - t1 = sb[0x2d + i*4]; - t2 = sb[0x2e + i*4]; - t3 = sb[0x2f + i*4]; - t4 = sb[0x30 + i*4]; - - count = ((t1 & 0x00ff) | (((t2 & 0x00ff) << 8) & 0xff00) )+ 1; /*sector count*/ - s = ((t3 & 0x00ff) | (((t4 & 0x00ff) << 8) & 0xff00)) * 256;; /*Sector size*/ - -#ifdef DEBUG - printf("count and size %x, %x\n", count, s); - printf("sector count for erase region %d is %d\n", i, count); -#endif - for(j = 0; j < count; j++) - { -#ifdef DEBUG - printf("%x, ", (uint)offset); -#endif - info->start[ info->sector_count + j] = offset; - offset += s; - } - info->sector_count += count; - } - - if ((offset - (ulong)base) != info->size) - printf("WARNING reported size %x does not match to calculted size %x.\n" - , (uint)info->size, (uint)(offset - (ulong)base) ); - - /* Next check if there are any sectors protected.*/ - - for(i = 0; i < info->sector_count; i++) - info->protect[i] = flash_get_protect_status(info, i); - - *sb = 0xffff; -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return ; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case INTEL_MANUFACT & FLASH_VENDMASK: - printf ("Intel "); - break; - default: - printf ("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case INTEL_ID_28F320C3B & FLASH_TYPEMASK: - printf ("28F320RC3(4 MB)\n"); - break; - case INTEL_ID_28F320J3A: - printf("28F320J3A (4 MB)\n"); - break; - default: - printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i=0; i<info->sector_count; ++i) { - if ((i % 4) == 0) - printf ("\n "); - printf (" %02d %08lX%s", - i, info->start[i], - info->protect[i]!=0 ? " (RO)" : " " - ); - } - printf ("\n"); - return ; -} - -ulong flash_recognize (vu_long *base) -{ - ulong id; - ulong res = FLASH_UNKNOWN; - vu_short * sb = (vu_short*)base; - - *sb = 0xffff; - - *sb = 0x0090; - id = base[0]; - - switch (id & 0x00FF0000) - { - case (MT_MANUFACT & 0x00FF0000): /* MT or => Intel */ - case (INTEL_ALT_MANU & 0x00FF0000): - res = FLASH_MAN_INTEL; - break; - default: - res = FLASH_UNKNOWN; - } - - *sb = 0xffff; - - return res; -} - -/*-----------------------------------------------------------------------*/ -#define INTEL_FLASH_STATUS_BLS 0x02 -#define INTEL_FLASH_STATUS_PSS 0x04 -#define INTEL_FLASH_STATUS_VPPS 0x08 -#define INTEL_FLASH_STATUS_PS 0x10 -#define INTEL_FLASH_STATUS_ES 0x20 -#define INTEL_FLASH_STATUS_ESS 0x40 -#define INTEL_FLASH_STATUS_WSMS 0x80 - -int flash_decode_status_bits(char status) -{ - int err = 0; - - if(!(status & INTEL_FLASH_STATUS_WSMS)) { - printf("Busy\n"); - err = -1; - } - - if(status & INTEL_FLASH_STATUS_ESS) { - printf("Erase suspended\n"); - err = -1; - } - - if(status & INTEL_FLASH_STATUS_ES) { - printf("Error in block erase\n"); - err = -1; - } - - if(status & INTEL_FLASH_STATUS_PS) { - printf("Error in programming\n"); - err = -1; - } - - if(status & INTEL_FLASH_STATUS_VPPS) { - printf("Vpp low, operation aborted\n"); - err = -1; - } - - if(status & INTEL_FLASH_STATUS_PSS) { - printf("Program is suspended\n"); - err = -1; - } - - if(status & INTEL_FLASH_STATUS_BLS) { - printf("Attempting to program/erase a locked sector\n"); - err = -1; - } - - if((status & INTEL_FLASH_STATUS_PS) && - (status & INTEL_FLASH_STATUS_ES) && - (status & INTEL_FLASH_STATUS_ESS)) { - printf("A command sequence error\n"); - return -1; - } - - return err; -} - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t *info, int s_first, int s_last) -{ - vu_short *addr; - int flag, prot, sect; - ulong start, now; - int rcode = 0; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - if ((info->flash_id & FLASH_VENDMASK) != (INTEL_MANUFACT & FLASH_VENDMASK)) { - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - start = get_timer (0); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last; sect++) { - char tmp; - - if (info->protect[sect] == 0) { /* not protected */ - addr = (vu_short *)(info->start[sect]); - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - /* Single Block Erase Command */ - *addr = 0x0020; - /* Confirm */ - *addr = 0x00D0; - /* Resume Command, as per errata update */ - *addr = 0x00D0; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - *addr = 0x70; /*Read status register command*/ - tmp = (short)*addr & 0x00FF; /* Read the status */ - while (!(tmp & INTEL_FLASH_STATUS_WSMS)) { - if ((now=get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - *addr = 0x0050; /* Reset the status register */ - *addr = 0xffff; - printf ("Timeout\n"); - return 1; - } - /* show that we're waiting */ - if ((now - start) > 1000) { /* every second */ - putc ('.'); - } - udelay(100000); /* 100 ms */ - *addr = 0x0070; /*Read status register command*/ - tmp = (short)*addr & 0x00FF; /* Read status */ - start = get_timer(0); - } - if( tmp & INTEL_FLASH_STATUS_ES ) - flash_decode_status_bits(tmp); - - *addr = 0x0050; /* Reset the status register */ - *addr = 0xffff; /* Reset to read mode */ - } - } - - - printf (" done\n"); - return rcode; -} - -void flash_unprotect (flash_info_t *info) -{ - /*We can only unprotect the whole flash at once*/ - /*Therefore we must prevent the _flash_real_protect()*/ - /*from re-protecting sectors, that ware protected before */ - /*we called flash_real_protect();*/ - - int i; - - for(i = 0; i < info->sector_count; i++) - info->protect[i] = 0; - -#ifdef CONFIG_SYS_FLASH_PROTECTION - _flash_real_protect(info, 0, 0); -#endif -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ - -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong cp, wp, data; - int i, l, rc; - - wp = (addr & ~3); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i=0, cp=wp; i<l; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - for (; i<4 && cnt>0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt==0 && i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - } - - /* - * handle word aligned part - */ - while (cnt >= 4) { - data = 0; - for (i=0; i<4; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - cnt -= 4; - } - - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - return (write_word(info, wp, data)); -} - -/*----------------------------------------------------------------------- - * Write a word to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -int write_word (flash_info_t *info, ulong dest, ulong da) -{ - vu_short *addr = (vu_short *)dest; - ulong start; - char csr; - int flag; - int i; - union { - u32 data32; - u16 data16[2]; - } data; - - data.data32 = da; - - /* Check if Flash is (sufficiently) erased */ - if (((*addr & data.data16[0]) != data.data16[0]) || - ((*(addr+1) & data.data16[1]) != data.data16[1])) { - return (2); - } - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - for(i = 0; i < 2; i++) - { - /* Write Command */ - *addr = 0x0010; - - /* Write Data */ - *addr = data.data16[i]; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* data polling for D7 */ - start = get_timer (0); - flag = 0; - *addr = 0x0070; /*Read statusregister command */ - while (((csr = *addr) & INTEL_FLASH_STATUS_WSMS)!=INTEL_FLASH_STATUS_WSMS) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - flag = 1; - break; - } - *addr = 0x0070; /*Read statusregister command */ - } - if (csr & INTEL_FLASH_STATUS_PSS) { - printf ("CSR indicates write error (%0x) at %08lx\n", - csr, (ulong)addr); - flag = 1; - } - - /* Clear Status Registers Command */ - *addr = 0x0050; - /* Reset to read array mode */ - *addr = 0xffff; - addr++; - } - - return (flag); -} - -int flash_real_protect(flash_info_t *info, long offset, int prot) -{ - int i, idx; - - for(idx = 0; idx < info->sector_count; idx++) - if(info->start[idx] == offset) - break; - - if(idx==info->sector_count) - return -1; - - if(prot == 0) { - /* Unprotect one sector, which means unprotect all flash - * and reprotect the other protected sectors. - */ - _flash_real_protect(info, 0, 0); /* Unprotects the whole flash*/ - info->protect[idx] = 0; - - for(i = 0; i < info->sector_count; i++) - if(info->protect[i]) - _flash_real_protect(info, i, 1); - } - else { - /* We can protect individual sectors */ - _flash_real_protect(info, idx, 1); - } - - for( i = 0; i < info->sector_count; i++) - info->protect[i] = flash_get_protect_status(info, i); - - return 0; -} - -int _flash_real_protect(flash_info_t *info, long idx, int prot) -{ - vu_short *addr; - int flag; - ushort cmd; - ushort tmp; - ulong now, start; - - if ((info->flash_id & FLASH_VENDMASK) != (INTEL_MANUFACT & FLASH_VENDMASK)) { - printf ("Can't change protection for unknown flash type %08lx - aborted\n", - info->flash_id); - return -1; - } - - if(prot == 0) { - /*Unlock the sector*/ - cmd = 0x00D0; - } - else { - /*Lock the sector*/ - cmd = 0x0001; - } - - addr = (vu_short *)(info->start[idx]); - - /* If chip is busy, wait for it */ - start = get_timer(0); - *addr = 0x0070; /*Read status register command*/ - tmp = ((ushort)(*addr))&0x00ff; /*Read the status*/ - while(!(tmp & INTEL_FLASH_STATUS_WSMS)) { - /*Write State Machine Busy*/ - /*Wait untill done or timeout.*/ - if ((now=get_timer(start)) > CONFIG_SYS_FLASH_WRITE_TOUT) { - *addr = 0x0050; /* Reset the status register */ - *addr = 0xffff; /* Reset the chip */ - printf ("TTimeout\n"); - return 1; - } - *addr = 0x0070; - tmp = ((ushort)(*addr))&0x00ff; /*Read the status*/ - start = get_timer(0); - } - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - /* Unlock block*/ - *addr = 0x0060; - - *addr = cmd; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - start = get_timer(0); - *addr = 0x0070; /*Read status register command*/ - tmp = ((ushort)(*addr)) & 0x00FF; /* Read the status */ - while (!(tmp & INTEL_FLASH_STATUS_WSMS)) { - /* Write State Machine Busy */ - if ((now=get_timer(start)) > CONFIG_SYS_FLASH_WRITE_TOUT) { - *addr = 0x0050; /* Reset the status register */ - *addr = 0xffff; - printf ("Timeout\n"); - return 1; - } - /* show that we're waiting */ - if ((now - start) > 1000) { /* every second */ - putc ('.'); - } - udelay(100000); /* 100 ms */ - *addr = 0x70; /*Read status register command*/ - tmp = (short)*addr & 0x00FF; /* Read status */ - start = get_timer(0); - } - if( tmp & INTEL_FLASH_STATUS_PS ) - flash_decode_status_bits(tmp); - - *addr =0x0050; /*Clear status register*/ - - /* reset to read mode */ - *addr = 0xffff; - - return 0; -} diff --git a/board/flagadm/u-boot.lds b/board/flagadm/u-boot.lds deleted file mode 100644 index 7ae91ff..0000000 --- a/board/flagadm/u-boot.lds +++ /dev/null @@ -1,82 +0,0 @@ -/* - * (C) Copyright 2001-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) - -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .text : - { - arch/powerpc/cpu/mpc8xx/start.o (.text*) - arch/powerpc/cpu/mpc8xx/traps.o (.text*) - - *(.text*) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - KEEP(*(.got)) - PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/board/flagadm/u-boot.lds.debug b/board/flagadm/u-boot.lds.debug deleted file mode 100644 index b0091db..0000000 --- a/board/flagadm/u-boot.lds.debug +++ /dev/null @@ -1,121 +0,0 @@ -/* - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/mpc8xx/start.o (.text) - common/dlmalloc.o (.text) - lib/vsprintf.o (.text) - lib/crc32.o (.text) - - . = env_offset; - common/env_embedded.o(.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.rodata) - *(.rodata1) - *(.rodata.str1.4) - *(.eh_frame) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x0FFF) & 0xFFFFF000; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(4096); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(4096); - __init_end = .; - - __bss_start = .; - .bss : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/configs/FLAGADM_defconfig b/configs/FLAGADM_defconfig deleted file mode 100644 index 6113797..0000000 --- a/configs/FLAGADM_defconfig +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_PPC=y -CONFIG_8xx=y -CONFIG_TARGET_FLAGADM=y diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 4ae2a65..7ef5a22 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order. Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +flagadm powerpc mpc8xx - - Kári Davíðsson <kd@flaga.is> gen860t powerpc mpc8xx - - Keith Outwater <Keith_Outwater@mvis.com> sixnet powerpc mpc8xx - - Dave Ellis <DGE@sixnetio.com> svm_sc8xx powerpc mpc8xx - - John Zhan <zhanz@sinovee.com> diff --git a/include/commproc.h b/include/commproc.h index 76a62de..82a1a98 100644 --- a/include/commproc.h +++ b/include/commproc.h @@ -456,27 +456,6 @@ typedef struct scc_enet { #define SICR_ENET_CLKRT ((uint)0x00002c00) #endif /* CONFIG_BSEIP */ -/*** BSEIP **********************************************************/ - -#ifdef CONFIG_FLAGADM -/* Enet configuration for the FLAGADM */ -/* Enet on SCC2 */ - -#define PROFF_ENET PROFF_SCC2 -#define CPM_CR_ENET CPM_CR_CH_SCC2 -#define SCC_ENET 1 -#define PA_ENET_RXD ((ushort)0x0004) -#define PA_ENET_TXD ((ushort)0x0008) -#define PA_ENET_TCLK ((ushort)0x0100) -#define PA_ENET_RCLK ((ushort)0x0400) -#define PB_ENET_TENA ((uint)0x00002000) -#define PC_ENET_CLSN ((ushort)0x0040) -#define PC_ENET_RENA ((ushort)0x0080) - -#define SICR_ENET_MASK ((uint)0x0000ff00) -#define SICR_ENET_CLKRT ((uint)0x00003400) -#endif /* CONFIG_FLAGADM */ - /*** ELPT860 *********************************************************/ #ifdef CONFIG_ELPT860 diff --git a/include/configs/FLAGADM.h b/include/configs/FLAGADM.h deleted file mode 100644 index d93223f..0000000 --- a/include/configs/FLAGADM.h +++ /dev/null @@ -1,296 +0,0 @@ -/* - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC823 1 /* This is a MPC823 CPU */ -#define CONFIG_FLAGADM 1 /* ...on a FLAGA DM */ -#define CONFIG_8xx_GCLK_FREQ 48000000 /*48MHz*/ - -#define CONFIG_SYS_TEXT_BASE 0x40000000 - -#undef CONFIG_8xx_CONS_SMC1 /* Console is on SMC1 */ -#define CONFIG_8xx_CONS_SMC2 1 -#undef CONFIG_8xx_CONS_NONE - -#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */ -#define CONFIG_BOOTDELAY 3 /* autoboot after 5 seconds */ - -#undef CONFIG_CLOCKS_IN_MHZ - -#if 0 -#define CONFIG_BOOTARGS "root=/dev/nfs rw ip=bootp" -#define CONFIG_BOOTCOMMAND \ - "setenv bootargs root=/dev/ram ip=off panic=1;" \ - "bootm 40040000 400e0000" -#else -#define CONFIG_BOOTARGS "root=/dev/nfs rw ip=bootp panic=1" -#define CONFIG_BOOTCOMMAND "bootp 0x400000; bootm 0x400000" -#endif /* 0|1*/ - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ - -/*#define CONFIG_WATCHDOG*/ /* watchdog enabled */ -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - - -/* - * Command line configuration. - */ - -#define CONFIG_CMD_BDI -#define CONFIG_CMD_IMI -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_LOADB -#define CONFIG_CMD_LOADS -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_IMMAP -#define CONFIG_CMD_NET - - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "EEG> " /* Monitor Command Prompt */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0f00000 /* 1 ... 15 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x40040000 /* default load address */ - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xFF000000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0x40000000 -#define CONFIG_SYS_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 71 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 8000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -/* This is a litlebit wasteful, but one sector is 128kb and we have to - * assigne a whole sector for the environment, so that we can safely - * erase and write it without disturbing the boot sector - */ -#define CONFIG_ENV_OFFSET 0x20000 /* Offset of Environment Sector */ -#define CONFIG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */ - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#endif -#define CONFIG_SYS_DELAYED_ICACHE 1 /* enable ICache not before - * running in RAM. - */ - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 11-9 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze - */ -#ifdef CONFIG_WATCHDOG -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_SWF | SYPCR_SWE | SYPCR_SWRI | SYPCR_SWP) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF) -#endif - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 11-6 - *----------------------------------------------------------------------- - * PCMCIA config., multi-function pin tri-state - */ -#define CONFIG_SYS_PRE_SIUMCR (SIUMCR_DBGC11 | SIUMCR_MPRE | \ - SIUMCR_MLRC01 | SIUMCR_GB5E) -#define CONFIG_SYS_SIUMCR (CONFIG_SYS_PRE_SIUMCR | SIUMCR_DLK) - -/*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 11-26 - *----------------------------------------------------------------------- - * Clear Reference Interrupt Status, Timebase freezing enabled - */ -#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) - -/*----------------------------------------------------------------------- - * RTCSC - Real-Time Clock Status and Control Register 11-27 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 11-31 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled - */ -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) - -/*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 - *----------------------------------------------------------------------- - * Reset PLL lock status sticky bit, timer expired status bit and timer - * interrupt status bit miltiplier of 0x00b i.e. operation clock is - * 4MHz * (0x00b+1) = 4MHz * 12 = 48MHz - */ -#define CONFIG_SYS_PLPRCR (0x00b00000 | PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST) - -/*----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register 15-27 - *----------------------------------------------------------------------- - * Set clock output, timebase and RTC source and divider, - * power management and some other internal clocks - */ -#define SCCR_MASK SCCR_EBDF11 -#define CONFIG_SYS_SCCR ( SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ - SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \ - SCCR_DFALCD00) - -#define CONFIG_SYS_DER 0 - -/* - * In the Flaga DM we have: - * Flash on BR0/OR0/CS0a at 0x40000000 - * Display on BR1/OR1/CS1 at 0x20000000 - * SDRAM on BR2/OR2/CS2 at 0x00000000 - * Free BR3/OR3/CS3 - * DSP1 on BR4/OR4/CS4 at 0x80000000 - * DSP2 on BR5/OR5/CS5 at 0xa0000000 - * - * For now we just configure the Flash and the SDRAM and leave the others - * untouched. -*/ - -#define CONFIG_SYS_FLASH_PROTECTION 0 - -#define FLASH_BASE0 0x40000000 /* FLASH bank #0 */ - -/* used to re-map FLASH both when starting from SRAM or FLASH: - * restrict access enough to keep SRAM working (if any) - * but not too much to meddle with FLASH accesses - */ -#define CONFIG_SYS_OR_AM 0xff000000 /* OR addr mask */ -#define CONFIG_SYS_OR_ATM 0x00006000 - -/* FLASH timing: ACS = 10, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 1 */ -#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | \ - OR_SCY_3_CLK | OR_TRLX | OR_EHTR ) - -#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_OR_AM | CONFIG_SYS_OR_ATM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0 & BR_BA_MSK) | BR_PS_16 | BR_V ) - -/* - * BR2 and OR2 (SDRAM) - * - */ -#define SDRAM_BASE2 0x00000000 /* SDRAM bank #0 */ -#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */ - -/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */ -#define CONFIG_SYS_OR_TIMING_SDRAM ( 0x00000800 ) - -#define CONFIG_SYS_OR2_PRELIM (CONFIG_SYS_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM) -#define CONFIG_SYS_BR2_PRELIM ((SDRAM_BASE2 & BR_BA_MSK) | BR_MS_UPMA | BR_V ) - -#define CONFIG_SYS_BR2 CONFIG_SYS_BR2_PRELIM -#define CONFIG_SYS_OR2 CONFIG_SYS_OR2_PRELIM - -/* - * MAMR settings for SDRAM - */ -#define CONFIG_SYS_MAMR_48_SDR (CONFIG_SYS_MAMR_PTA | MAMR_WLFA_1X | MAMR_RLFA_1X \ - | MAMR_G0CLA_A11) - -/* - * Memory Periodic Timer Prescaler - */ - -/* periodic timer for refresh */ -#define CONFIG_SYS_MAMR_PTA 0x0F000000 - -/* - * BR4 and OR4 (DSP1) - * - * We do not wan't preliminary setup of the DSP, anyway we need the - * UPMB setup correctly before we can access the DSP. - * -*/ -#define DSP_BASE 0x80000000 - -#define CONFIG_SYS_OR4 ( OR_AM_MSK | OR_CSNT_SAM | OR_BI | OR_G5LS) -#define CONFIG_SYS_BR4 ( (DSP_BASE & BR_BA_MSK) | BR_PS_16 | BR_MS_UPMB | BR_V ) - -#endif /* __CONFIG_H */ |