diff options
168 files changed, 24208 insertions, 3171 deletions
@@ -312,6 +312,14 @@ LIST_coldfire=" \ LIST_avr32="atstk1002" +######################################################################### +## Blackfin Systems +######################################################################### + +LIST_blackfin=" \ + bf533-ezkit bf533-stamp bf537-stamp bf561-ezkit \ +" + #----------------------------------------------------------------------- #----- for now, just run PPC by default ----- @@ -345,6 +353,7 @@ do nios|nios2| \ x86|I486| \ coldfire| \ + blackfin| \ avr32) for target in `eval echo '$LIST_'${arg}` do @@ -146,7 +146,7 @@ ifeq ($(ARCH),microblaze) CROSS_COMPILE = mb- endif ifeq ($(ARCH),blackfin) -CROSS_COMPILE = bfin-elf- +CROSS_COMPILE = bfin-uclinux- endif ifeq ($(ARCH),avr32) CROSS_COMPILE = avr32- @@ -178,7 +178,15 @@ OBJS += cpu/$(CPU)/resetvec.o endif ifeq ($(CPU),bf533) OBJS += cpu/$(CPU)/start1.o cpu/$(CPU)/interrupt.o cpu/$(CPU)/cache.o -OBJS += cpu/$(CPU)/cplbhdlr.o cpu/$(CPU)/cplbmgr.o cpu/$(CPU)/flush.o +OBJS += cpu/$(CPU)/flush.o cpu/$(CPU)/init_sdram.o +endif +ifeq ($(CPU),bf537) +OBJS += cpu/$(CPU)/start1.o cpu/$(CPU)/interrupt.o cpu/$(CPU)/cache.o +OBJS += cpu/$(CPU)/flush.o cpu/$(CPU)/init_sdram.o +endif +ifeq ($(CPU),bf561) +OBJS += cpu/$(CPU)/start1.o cpu/$(CPU)/interrupt.o cpu/$(CPU)/cache.o +OBJS += cpu/$(CPU)/flush.o cpu/$(CPU)/init_sdram.o endif OBJS := $(addprefix $(obj),$(OBJS)) @@ -2353,14 +2361,17 @@ suzaku_config: unconfig ######################################################################### ## Blackfin ######################################################################### -ezkit533_config : unconfig - @$(MKCONFIG) $(@:_config=) blackfin bf533 ezkit533 +bf533-ezkit_config: unconfig + @$(MKCONFIG) $(@:_config=) blackfin bf533 bf533-ezkit + +bf533-stamp_config: unconfig + @$(MKCONFIG) $(@:_config=) blackfin bf533 bf533-stamp -stamp_config : unconfig - @$(MKCONFIG) $(@:_config=) blackfin bf533 stamp +bf537-stamp_config: unconfig + @$(MKCONFIG) $(@:_config=) blackfin bf537 bf537-stamp -dspstamp_config : unconfig - @$(MKCONFIG) $(@:_config=) blackfin bf533 dsp_stamp +bf561-ezkit_config: unconfig + @$(MKCONFIG) $(@:_config=) blackfin bf561 bf561-ezkit #======================================================================== # AVR32 @@ -2397,6 +2408,8 @@ clean: rm -f $(obj)board/netstar/*.srec $(obj)board/netstar/*.bin rm -f $(obj)board/trab/trab_fkt $(obj)board/voiceblue/eeprom rm -f $(obj)board/integratorap/u-boot.lds $(obj)board/integratorcp/u-boot.lds + rm -f $(obj)board/bf533-ezkit/u-boot.lds $(obj)board/bf533-stamp/u-boot.lds + rm -f $(obj)board/bf537-stamp/u-boot.lds $(obj)board/bf561-ezkit/u-boot.lds rm -f $(obj)include/bmp_logo.h rm -f $(obj)nand_spl/u-boot-spl $(obj)nand_spl/u-boot-spl.map diff --git a/blackfin_config.mk b/blackfin_config.mk index e2747aa..df324b7 100644 --- a/blackfin_config.mk +++ b/blackfin_config.mk @@ -21,4 +21,4 @@ # MA 02111-1307 USA # -PLATFORM_CPPFLAGS += -DCONFIG_BLACKFIN -D__blackfin__ +PLATFORM_CPPFLAGS += -DCONFIG_BLACKFIN diff --git a/board/stamp/Makefile b/board/bf533-ezkit/Makefile index ee52007..4fe7d78 100644 --- a/board/stamp/Makefile +++ b/board/bf533-ezkit/Makefile @@ -1,7 +1,7 @@ # # U-boot - Makefile # -# Copyright (c) 2005 blackfin.uclinux.org +# Copyright (c) 2007 Analog Device Inc. # # (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -25,41 +25,28 @@ # MA 02111-1307 USA # -# -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o stamp.o +COBJS := $(BOARD).o flash.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(obj).depend $(OBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(SOBJS) u-boot.lds + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +u-boot.lds: u-boot.lds.S + $(CPP) $(CPPFLAGS) -P -Ubfin $^ > $@.tmp + mv -f $@.tmp $@ + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend ######################################################################### diff --git a/board/ezkit533/ezkit533.c b/board/bf533-ezkit/bf533-ezkit.c index 8d6c8de..feaeb00 100644 --- a/board/ezkit533/ezkit533.c +++ b/board/bf533-ezkit/bf533-ezkit.c @@ -30,24 +30,28 @@ #include "psd4256.h" #endif -DECLARE_GLOBAL_DATA_PTR; - int checkboard(void) { +#if (BFIN_CPU == ADSP_BF531) + printf("CPU: ADSP BF531 Rev.: 0.%d\n", *pCHIPID >> 28); +#elif (BFIN_CPU == ADSP_BF532) + printf("CPU: ADSP BF532 Rev.: 0.%d\n", *pCHIPID >> 28); +#else printf("CPU: ADSP BF533 Rev.: 0.%d\n", *pCHIPID >> 28); +#endif printf("Board: ADI BF533 EZ-Kit Lite board\n"); printf(" Support: http://blackfin.uclinux.org/\n"); - printf(" Richard Klingler <richard@uclinux.net>\n"); return 0; } long int initdram(int board_type) { + DECLARE_GLOBAL_DATA_PTR; #ifdef DEBUG int brate; char *tmp = getenv("baudrate"); brate = simple_strtoul(tmp, NULL, 16); - printf("Serial Port initialized with Baud rate = %x\n",brate); + printf("Serial Port initialized with Baud rate = %x\n", brate); printf("SDRAM attributes:\n"); printf("tRCD %d SCLK Cycles,tRP %d SCLK Cycles,tRAS %d SCLK Cycles" "tWR %d SCLK Cycles,CAS Latency %d SCLK cycles \n", @@ -64,9 +68,13 @@ long int initdram(int board_type) /* miscellaneous platform dependent initialisations */ int misc_init_r(void) { - /* Set direction bits for Video en/decoder reset as output */ - *(volatile unsigned char *)(CFG_FLASH1_BASE + PSD_PORTA_DIR) = PSDA_VDEC_RST | PSDA_VENC_RST; - /* Deactivate Video en/decoder reset lines */ - *(volatile unsigned char *)(CFG_FLASH1_BASE + PSD_PORTA_DOUT) = PSDA_VDEC_RST | PSDA_VENC_RST; + /* Set direction bits for Video en/decoder reset as output */ + *(volatile unsigned char *)(CFG_FLASH1_BASE + PSD_PORTA_DIR) = + PSDA_VDEC_RST | PSDA_VENC_RST; + /* Deactivate Video en/decoder reset lines */ + *(volatile unsigned char *)(CFG_FLASH1_BASE + PSD_PORTA_DOUT) = + PSDA_VDEC_RST | PSDA_VENC_RST; + + return 0; } #endif diff --git a/board/ezkit533/config.mk b/board/bf533-ezkit/config.mk index 36c9f99..f39be5f 100644 --- a/board/ezkit533/config.mk +++ b/board/bf533-ezkit/config.mk @@ -20,6 +20,6 @@ # Foundation, Inc., 59 Temple Place, Suite 330, Boston, # MA 02111-1307 USA # - +# TEXT_BASE should be defined as the MAX_SDRAM Address - 256k bytes +# 256k is defined as CFG_MONITOR_LEN in ./include/configs/<board>.h TEXT_BASE = 0x01FC0000 -PLATFORM_CPPFLAGS += -I$(TOPDIR) diff --git a/board/ezkit533/flash-defines.h b/board/bf533-ezkit/flash-defines.h index 8f9dff5..e211918 100644 --- a/board/ezkit533/flash-defines.h +++ b/board/bf533-ezkit/flash-defines.h @@ -52,17 +52,13 @@ #define CFG_FLASH0_BASE 0x20000000 #define RESET_VAL 0xF0 - -asm("#define FLASH_START_L 0x0000"); -asm("#define FLASH_START_H 0x2000"); - flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; int get_codes(void); int poll_toggle_bit(long lOffset); void reset_flash(void); int erase_flash(void); -int erase_block_flash(int,unsigned long); +int erase_block_flash(int, unsigned long); void unlock_flash(long lOffset); int write_data(long lStart, long lCount, long lStride, int *pnData); int FillData(long lStart, long lCount, long lStride, int *pnData); diff --git a/board/ezkit533/flash.c b/board/bf533-ezkit/flash.c index b0a0796..067a260 100644 --- a/board/ezkit533/flash.c +++ b/board/bf533-ezkit/flash.c @@ -26,6 +26,7 @@ * MA 02111-1307 USA */ +#include <asm/io.h> #include "flash-defines.h" void flash_reset(void) @@ -33,14 +34,13 @@ void flash_reset(void) reset_flash(); } -unsigned long flash_get_size(ulong baseaddr, flash_info_t * info, - int bank_flag) +unsigned long flash_get_size(ulong baseaddr, flash_info_t * info, int bank_flag) { int id = 0, i = 0; static int FlagDev = 1; id = get_codes(); - if(FlagDev) { + if (FlagDev) { #ifdef DEBUG printf("Device ID of the Flash is %x\n", id); #endif @@ -100,10 +100,11 @@ unsigned long flash_init(void) if (flash_info[0].flash_id == FLASH_UNKNOWN || size_b0 == 0) { printf("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", - size_b0, size_b0 >> 20); + size_b0, size_b0 >> 20); } - (void)flash_protect(FLAG_PROTECT_SET,CFG_FLASH0_BASE,(flash_info[0].start[2] - 1),&flash_info[0]); + (void)flash_protect(FLAG_PROTECT_SET, CFG_FLASH0_BASE, + (flash_info[0].start[2] - 1), &flash_info[0]); return (size_b0 + size_b1 + size_b2); } @@ -122,15 +123,14 @@ void flash_print_info(flash_info_t * info) printf("ST Microelectronics "); break; default: - printf("Unknown Vendor "); + printf("Unknown Vendor: (0x%08X) ", info->flash_id); break; } for (i = 0; i < info->sector_count; ++i) { if ((i % 5) == 0) printf("\n "); printf(" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " "); + info->start[i], info->protect[i] ? " (RO)" : " "); } printf("\n"); return; @@ -138,8 +138,8 @@ void flash_print_info(flash_info_t * info) int flash_erase(flash_info_t * info, int s_first, int s_last) { - int cnt = 0,i; - int prot,sect; + int cnt = 0, i; + int prot, sect; prot = 0; for (sect = s_first; sect <= s_last; ++sect) { @@ -148,15 +148,16 @@ int flash_erase(flash_info_t * info, int s_first, int s_last) } if (prot) - printf ("- Warning: %d protected sectors will not be erased!\n", prot); + printf("- Warning: %d protected sectors will not be erased!\n", + prot); else - printf ("\n"); + printf("\n"); cnt = s_last - s_first + 1; if (cnt == FLASH_TOT_SECT) { printf("Erasing flash, Please Wait \n"); - if(erase_flash() < 0) { + if (erase_flash() < 0) { printf("Erasing flash failed \n"); return FLASH_FAIL; } @@ -164,7 +165,7 @@ int flash_erase(flash_info_t * info, int s_first, int s_last) printf("Erasing Flash locations, Please Wait\n"); for (i = s_first; i <= s_last; i++) { if (info->protect[i] == 0) { /* not protected */ - if(erase_block_flash(i, info->start[i]) < 0) { + if (erase_block_flash(i, info->start[i]) < 0) { printf("Error Sector erasing \n"); return FLASH_FAIL; } @@ -178,13 +179,12 @@ int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) { int ret; - ret = write_data(addr, cnt, 1, (int *) src); - if(ret == FLASH_FAIL) + ret = write_data(addr, cnt, 1, (int *)src); + if (ret == FLASH_FAIL) return ERR_NOT_ERASED; return FLASH_SUCCESS; } - int write_data(long lStart, long lCount, long lStride, int *pnData) { long i = 0; @@ -198,20 +198,23 @@ int write_data(long lStart, long lCount, long lStride, int *pnData) for (i = 0; (i < lCount / 4) && (i < BUFFER_SIZE); i++) { for (iShift = 0, j = 0; (j < iNumWords); - j++, ulOffset += (lStride * 2)) { + j++, ulOffset += (lStride * 2)) { if ((ulOffset >= INVALIDLOCNSTART) - && (ulOffset < INVALIDLOCNEND)) { - printf("Invalid locations, Try writing to another location \n"); + && (ulOffset < INVALIDLOCNEND)) { + printf + ("Invalid locations, Try writing to another location \n"); return FLASH_FAIL; } get_sector_number(ulOffset, &nSector); - read_flash(ulOffset,&d); - if(d != 0xffff) { - printf("Flash not erased at offset 0x%x Please erase to reprogram \n",ulOffset); + read_flash(ulOffset, &d); + if (d != 0xffff) { + printf + ("Flash not erased at offset 0x%x Please erase to reprogram \n", + ulOffset); return FLASH_FAIL; } unlock_flash(ulOffset); - if(write_flash(ulOffset, (pnData[i] >> iShift)) < 0) { + if (write_flash(ulOffset, (pnData[i] >> iShift)) < 0) { printf("Error programming the flash \n"); return FLASH_FAIL; } @@ -220,17 +223,18 @@ int write_data(long lStart, long lCount, long lStride, int *pnData) } if (nLeftover > 0) { if ((ulOffset >= INVALIDLOCNSTART) - && (ulOffset < INVALIDLOCNEND)) - return FLASH_FAIL; + && (ulOffset < INVALIDLOCNEND)) + return FLASH_FAIL; get_sector_number(ulOffset, &nSector); - read_flash(ulOffset,&d); - if(d != 0xffff) { - printf("Flash already programmed. Please erase to reprogram \n"); - printf("uloffset = 0x%x \t d = 0x%x\n",ulOffset,d); + read_flash(ulOffset, &d); + if (d != 0xffff) { + printf + ("Flash already programmed. Please erase to reprogram \n"); + printf("uloffset = 0x%x \t d = 0x%x\n", ulOffset, d); return FLASH_FAIL; } unlock_flash(ulOffset); - if(write_flash(ulOffset, pnData[i]) < 0) { + if (write_flash(ulOffset, pnData[i]) < 0) { printf("Error programming the flash \n"); return FLASH_FAIL; } @@ -252,8 +256,8 @@ int read_data(long ulStart, long lCount, long lStride, int *pnData) for (i = 0; (i < lCount / 4) && (i < BUFFER_SIZE); i++) { for (iShift = 0, j = 0; j < iNumWords; j += 2) { if ((ulOffset >= INVALIDLOCNSTART) - && (ulOffset < INVALIDLOCNEND)) - return FLASH_FAIL; + && (ulOffset < INVALIDLOCNEND)) + return FLASH_FAIL; get_sector_number(ulOffset, &nSector); read_flash(ulOffset, &nLow); @@ -265,8 +269,8 @@ int read_data(long ulStart, long lCount, long lStride, int *pnData) } if (nLeftover > 0) { if ((ulOffset >= INVALIDLOCNSTART) - && (ulOffset < INVALIDLOCNEND)) - return FLASH_FAIL; + && (ulOffset < INVALIDLOCNEND)) + return FLASH_FAIL; get_sector_number(ulOffset, &nSector); read_flash(ulOffset, &pnData[i]); @@ -279,10 +283,10 @@ int write_flash(long nOffset, int nValue) long addr; addr = (CFG_FLASH_BASE + nOffset); - asm("ssync;"); - *(unsigned volatile short *) addr = nValue; - asm("ssync;"); - if(poll_toggle_bit(nOffset) < 0) + sync(); + *(unsigned volatile short *)addr = nValue; + sync(); + if (poll_toggle_bit(nOffset) < 0) return FLASH_FAIL; return FLASH_SUCCESS; } @@ -294,29 +298,30 @@ int read_flash(long nOffset, int *pnValue) if (nOffset != 0x2) reset_flash(); - asm("ssync;"); - nValue = *(volatile unsigned short *) addr; - asm("ssync;"); + sync(); + nValue = *(volatile unsigned short *)addr; + sync(); *pnValue = nValue; return TRUE; } int poll_toggle_bit(long lOffset) { - unsigned int u1,u2; + unsigned int u1, u2; unsigned long timeout = 0xFFFFFFFF; - volatile unsigned long *FB = (volatile unsigned long *)(0x20000000 + lOffset); - while(1) { - if(timeout < 0) + volatile unsigned long *FB = + (volatile unsigned long *)(0x20000000 + lOffset); + while (1) { + if (timeout < 0) break; u1 = *(volatile unsigned short *)FB; u2 = *(volatile unsigned short *)FB; - if((u1 & 0x0040) == (u2 & 0x0040)) + if ((u1 & 0x0040) == (u2 & 0x0040)) return FLASH_SUCCESS; - if((u2 & 0x0020) == 0x0000) + if ((u2 & 0x0020) == 0x0000) continue; u1 = *(volatile unsigned short *)FB; - if((u2 & 0x0040) == (u1 & 0x0040)) + if ((u2 & 0x0040) == (u1 & 0x0040)) return FLASH_SUCCESS; else { reset_flash(); @@ -325,7 +330,8 @@ int poll_toggle_bit(long lOffset) timeout--; } printf("Time out occured \n"); - if(timeout <0) return FLASH_FAIL; + if (timeout < 0) + return FLASH_FAIL; } void reset_flash(void) @@ -344,7 +350,7 @@ int erase_flash(void) write_flash(WRITESEQ5, WRITEDATA5); write_flash(WRITESEQ6, WRITEDATA6); - if(poll_toggle_bit(0x0000) < 0) + if (poll_toggle_bit(0x0000) < 0) return FLASH_FAIL; write_flash(SecFlashAOff + WRITESEQ1, WRITEDATA1); @@ -354,7 +360,7 @@ int erase_flash(void) write_flash(SecFlashAOff + WRITESEQ5, WRITEDATA5); write_flash(SecFlashAOff + WRITESEQ6, WRITEDATA6); - if(poll_toggle_bit(SecFlashASec1Off) < 0) + if (poll_toggle_bit(SecFlashASec1Off) < 0) return FLASH_FAIL; write_flash(PriFlashBOff + WRITESEQ1, WRITEDATA1); @@ -364,7 +370,7 @@ int erase_flash(void) write_flash(PriFlashBOff + WRITESEQ5, WRITEDATA5); write_flash(PriFlashBOff + WRITESEQ6, WRITEDATA6); - if(poll_toggle_bit(PriFlashBOff) <0) + if (poll_toggle_bit(PriFlashBOff) < 0) return FLASH_FAIL; write_flash(SecFlashBOff + WRITESEQ1, WRITEDATA1); @@ -374,7 +380,7 @@ int erase_flash(void) write_flash(SecFlashBOff + WRITESEQ5, WRITEDATA5); write_flash(SecFlashBOff + WRITESEQ6, WRITEDATA6); - if(poll_toggle_bit(SecFlashBOff) < 0) + if (poll_toggle_bit(SecFlashBOff) < 0) return FLASH_FAIL; return FLASH_SUCCESS; @@ -397,7 +403,7 @@ int erase_block_flash(int nBlock, unsigned long address) write_flash(ulSectorOff, BlockEraseVal); - if(poll_toggle_bit(ulSectorOff) < 0) + if (poll_toggle_bit(ulSectorOff) < 0) return FLASH_FAIL; return FLASH_SUCCESS; @@ -435,34 +441,34 @@ void get_sector_number(long ulOffset, int *pnSector) if (ulOffset >= SecFlashAOff) { if ((ulOffset < SecFlashASec1Off) - && (ulOffset < SecFlashASec2Off)) { - nSector = SECT32; + && (ulOffset < SecFlashASec2Off)) { + nSector = SECT32; } else if ((ulOffset >= SecFlashASec2Off) - && (ulOffset < SecFlashASec3Off)) { - nSector = SECT33; + && (ulOffset < SecFlashASec3Off)) { + nSector = SECT33; } else if ((ulOffset >= SecFlashASec3Off) - && (ulOffset < SecFlashASec4Off)) { - nSector = SECT34; + && (ulOffset < SecFlashASec4Off)) { + nSector = SECT34; } else if ((ulOffset >= SecFlashASec4Off) - && (ulOffset < SecFlashAEndOff)) { - nSector = SECT35; + && (ulOffset < SecFlashAEndOff)) { + nSector = SECT35; } } else if (ulOffset >= SecFlashBOff) { if ((ulOffset < SecFlashBSec1Off) - && (ulOffset < SecFlashBSec2Off)) { - nSector = SECT36; + && (ulOffset < SecFlashBSec2Off)) { + nSector = SECT36; } if ((ulOffset < SecFlashBSec2Off) - && (ulOffset < SecFlashBSec3Off)) { - nSector = SECT37; + && (ulOffset < SecFlashBSec3Off)) { + nSector = SECT37; } if ((ulOffset < SecFlashBSec3Off) - && (ulOffset < SecFlashBSec4Off)) { - nSector = SECT38; + && (ulOffset < SecFlashBSec4Off)) { + nSector = SECT38; } if ((ulOffset < SecFlashBSec4Off) - && (ulOffset < SecFlashBEndOff)) { - nSector = SECT39; + && (ulOffset < SecFlashBEndOff)) { + nSector = SECT39; } } else if ((ulOffset >= PriFlashAOff) && (ulOffset < SecFlashAOff)) { nSector = ulOffset & 0xffff0000; diff --git a/board/ezkit533/psd4256.h b/board/bf533-ezkit/psd4256.h index 01f6566..9776516 100644 --- a/board/ezkit533/psd4256.h +++ b/board/bf533-ezkit/psd4256.h @@ -49,19 +49,19 @@ * Flash A Port A Bit definitions */ -#define PSDA_PPICLK1 0x20 /* PPI Clock select bit 1 */ -#define PSDA_PPICLK0 0x10 /* PPI Clock select bit 0 */ -#define PSDA_VDEC_RST 0x08 /* Video decoder reset, 0 = RESET */ -#define PSDA_VENC_RST 0x04 /* Video encoder reset, 0 = RESET */ -#define PSDA_CODEC_RST 0x01 /* Codec reset, 0 = RESET */ +#define PSDA_PPICLK1 0x20 /* PPI Clock select bit 1 */ +#define PSDA_PPICLK0 0x10 /* PPI Clock select bit 0 */ +#define PSDA_VDEC_RST 0x08 /* Video decoder reset, 0 = RESET */ +#define PSDA_VENC_RST 0x04 /* Video encoder reset, 0 = RESET */ +#define PSDA_CODEC_RST 0x01 /* Codec reset, 0 = RESET */ /* * Flash A Port B Bit definitions */ -#define PSDA_LED9 0x20 /* LED 9, 1 = LED ON */ -#define PSDA_LED8 0x10 /* LED 8, 1 = LED ON */ -#define PSDA_LED7 0x08 /* LED 7, 1 = LED ON */ -#define PSDA_LED6 0x04 /* LED 6, 1 = LED ON */ -#define PSDA_LED5 0x02 /* LED 5, 1 = LED ON */ -#define PSDA_LED4 0x01 /* LED 4, 1 = LED ON */ +#define PSDA_LED9 0x20 /* LED 9, 1 = LED ON */ +#define PSDA_LED8 0x10 /* LED 8, 1 = LED ON */ +#define PSDA_LED7 0x08 /* LED 7, 1 = LED ON */ +#define PSDA_LED6 0x04 /* LED 6, 1 = LED ON */ +#define PSDA_LED5 0x02 /* LED 5, 1 = LED ON */ +#define PSDA_LED4 0x01 /* LED 4, 1 = LED ON */ diff --git a/board/ezkit533/u-boot.lds b/board/bf533-ezkit/u-boot.lds.S index 10203ff..9742e02 100644 --- a/board/ezkit533/u-boot.lds +++ b/board/bf533-ezkit/u-boot.lds.S @@ -1,7 +1,7 @@ /* - * U-boot - u-boot.lds + * U-boot - u-boot.lds.S * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Device Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -25,6 +25,8 @@ * MA 02111-1307 USA */ +#include <config.h> + OUTPUT_ARCH(bfin) SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); /* Do we need any of these for elf? @@ -55,6 +57,7 @@ SECTIONS .rela.plt : { *(.rela.plt) } .init : { *(.init) } .plt : { *(.plt) } + . = CFG_MONITOR_BASE; .text : { /* WARNING - the following is hand-optimized to fit within */ @@ -68,10 +71,11 @@ SECTIONS cpu/bf533/interrupt.o (.text) cpu/bf533/serial.o (.text) common/dlmalloc.o (.text) - lib_generic/vsprintf.o (.text) +/* lib_blackfin/bf533_string.o (.text) */ +/* lib_generic/vsprintf.o (.text) */ lib_generic/crc32.o (.text) lib_generic/zlib.o (.text) - board/ezkit533/ezkit533.o (.text) + board/bf533-ezkit/bf533-ezkit.o (.text) . = DEFINED(env_offset) ? env_offset : .; common/environment.o (.text) @@ -119,9 +123,9 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; + ___u_boot_cmd_start = .; .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + ___u_boot_cmd_end = .; __start___ex_table = .; diff --git a/board/bf533-stamp/Makefile b/board/bf533-stamp/Makefile new file mode 100644 index 0000000..8223d59 --- /dev/null +++ b/board/bf533-stamp/Makefile @@ -0,0 +1,58 @@ +# +# U-boot - Makefile +# +# Copyright (c) 2007 Analog Device Inc. +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o spi.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) u-boot.lds + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +u-boot.lds: u-boot.lds.S + $(CPP) $(CPPFLAGS) -P -Ubfin $^ > $@.tmp + mv -f $@.tmp $@ + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/stamp/stamp.c b/board/bf533-stamp/bf533-stamp.c index 7e3af20..2f6e751 100644 --- a/board/stamp/stamp.c +++ b/board/bf533-stamp/bf533-stamp.c @@ -27,9 +27,8 @@ #include <common.h> #include <asm/mem_init.h> -#include "stamp.h" - -DECLARE_GLOBAL_DATA_PTR; +#include <asm/io.h> +#include "bf533-stamp.h" #define STATUS_LED_OFF 0 #define STATUS_LED_ON 1 @@ -40,42 +39,45 @@ DECLARE_GLOBAL_DATA_PTR; # define SHOW_BOOT_PROGRESS(arg) #endif -int checkboard (void) +int checkboard(void) { - printf ("CPU: ADSP BF533 Rev.: 0.%d\n", *pCHIPID >> 28); - printf ("Board: ADI BF533 Stamp board\n"); - printf (" Support: http://blackfin.uclinux.org/\n"); - printf (" Richard Klingler <richard@uclinux.net>\n"); +#if (BFIN_CPU == ADSP_BF531) + printf("CPU: ADSP BF531 Rev.: 0.%d\n", *pCHIPID >> 28); +#elif (BFIN_CPU == ADSP_BF532) + printf("CPU: ADSP BF532 Rev.: 0.%d\n", *pCHIPID >> 28); +#else + printf("CPU: ADSP BF533 Rev.: 0.%d\n", *pCHIPID >> 28); +#endif + printf("Board: ADI BF533 Stamp board\n"); + printf(" Support: http://blackfin.uclinux.org/\n"); return 0; } -long int initdram (int board_type) +long int initdram(int board_type) { + DECLARE_GLOBAL_DATA_PTR; #ifdef DEBUG - printf ("SDRAM attributes:\n"); - printf (" tRCD:%d Cycles; tRP:%d Cycles; tRAS:%d Cycles; tWR:%d Cycles; " - "CAS Latency:%d cycles\n", - (SDRAM_tRCD >> 15), - (SDRAM_tRP >> 11), - (SDRAM_tRAS >> 6), - (SDRAM_tWR >> 19), - (SDRAM_CL >> 2)); - printf ("SDRAM Begin: 0x%x\n", CFG_SDRAM_BASE); - printf ("Bank size = %d MB\n", 128); + printf("SDRAM attributes:\n"); + printf + (" tRCD:%d Cycles; tRP:%d Cycles; tRAS:%d Cycles; tWR:%d Cycles; " + "CAS Latency:%d cycles\n", (SDRAM_tRCD >> 15), (SDRAM_tRP >> 11), + (SDRAM_tRAS >> 6), (SDRAM_tWR >> 19), (SDRAM_CL >> 2)); + printf("SDRAM Begin: 0x%x\n", CFG_SDRAM_BASE); + printf("Bank size = %d MB\n", 128); #endif gd->bd->bi_memstart = CFG_SDRAM_BASE; gd->bd->bi_memsize = CFG_MAX_RAM_SIZE; return (gd->bd->bi_memsize); } -void swap_to (int device_id) +void swap_to(int device_id) { if (device_id == ETHERNET) { *pFIO_DIR = PF0; - asm ("ssync;"); + sync(); *pFIO_FLAG_S = PF0; - asm ("ssync;"); + sync(); } else if (device_id == FLASH) { *pFIO_DIR = (PF4 | PF3 | PF2 | PF1 | PF0); *pFIO_FLAG_S = (PF4 | PF3 | PF2); @@ -85,9 +87,9 @@ void swap_to (int device_id) *pFIO_EDGE = (PF8 | PF7 | PF6 | PF5); *pFIO_INEN = (PF8 | PF7 | PF6 | PF5); *pFIO_FLAG_D = (PF4 | PF3 | PF2); - asm ("ssync;"); + sync(); } else { - printf ("Unknown bank to switch\n"); + printf("Unknown bank to switch\n"); } return; @@ -95,7 +97,7 @@ void swap_to (int device_id) #if defined(CONFIG_MISC_INIT_R) /* miscellaneous platform dependent initialisations */ -int misc_init_r (void) +int misc_init_r(void) { int i; int cf_stat = 0; @@ -104,7 +106,7 @@ int misc_init_r (void) *pFIO_EDGE = FIO_EDGE_CF_BITS; *pFIO_POLAR = FIO_POLAR_CF_BITS; for (i = 0; i < 0x300; i++) - asm ("nop;"); + asm("nop;"); if ((*pFIO_FLAG_S) & CF_STAT_BITS) { cf_stat = 0; @@ -115,37 +117,36 @@ int misc_init_r (void) *pFIO_EDGE = FIO_EDGE_BITS; *pFIO_POLAR = FIO_POLAR_BITS; - if (cf_stat) { - printf ("Booting from COMPACT flash\n"); + printf("Booting from COMPACT flash\n"); /* Set cycle time for CF */ - *(volatile unsigned long *) ambctl1 = CF_AMBCTL1VAL; + *(volatile unsigned long *)ambctl1 = CF_AMBCTL1VAL; for (i = 0; i < 0x1000; i++) - asm ("nop;"); + asm("nop;"); for (i = 0; i < 0x1000; i++) - asm ("nop;"); + asm("nop;"); for (i = 0; i < 0x1000; i++) - asm ("nop;"); + asm("nop;"); - serial_setbrg (); - ide_init (); + serial_setbrg(); + ide_init(); - setenv ("bootargs", ""); - setenv ("bootcmd", - "fatload ide 0:1 0x1000000 uImage-stamp;bootm 0x1000000;bootm 0x20100000"); + setenv("bootargs", ""); + setenv("bootcmd", + "fatload ide 0:1 0x1000000 uImage-stamp;bootm 0x1000000;bootm 0x20100000"); } else { - printf ("Booting from FLASH\n"); + printf("Booting from FLASH\n"); } - return 1; + return 0; } #endif #ifdef CONFIG_STAMP_CF -void cf_outb (unsigned char val, volatile unsigned char *addr) +void cf_outb(unsigned char val, volatile unsigned char *addr) { /* * Set PF1 PF0 respectively to 0 1 to divert address @@ -153,70 +154,70 @@ void cf_outb (unsigned char val, volatile unsigned char *addr) */ *pFIO_FLAG_S = CF_PF0; *pFIO_FLAG_C = CF_PF1; - asm ("ssync;"); + sync(); *(addr) = val; - asm ("ssync;"); + sync(); /* Setback PF1 PF0 to 0 0 to address external * memory banks */ - *(volatile unsigned short *) pFIO_FLAG_C = CF_PF1_PF0; - asm ("ssync;"); + *(volatile unsigned short *)pFIO_FLAG_C = CF_PF1_PF0; + sync(); } -unsigned char cf_inb (volatile unsigned char *addr) +unsigned char cf_inb(volatile unsigned char *addr) { volatile unsigned char c; *pFIO_FLAG_S = CF_PF0; *pFIO_FLAG_C = CF_PF1; - asm ("ssync;"); + sync(); c = *(addr); - asm ("ssync;"); + sync(); *pFIO_FLAG_C = CF_PF1_PF0; - asm ("ssync;"); + sync(); return c; } -void cf_insw (unsigned short *sect_buf, unsigned short *addr, int words) +void cf_insw(unsigned short *sect_buf, unsigned short *addr, int words) { int i; *pFIO_FLAG_S = CF_PF0; *pFIO_FLAG_C = CF_PF1; - asm ("ssync;"); + sync(); for (i = 0; i < words; i++) { *(sect_buf + i) = *(addr); - asm ("ssync;"); + sync(); } *pFIO_FLAG_C = CF_PF1_PF0; - asm ("ssync;"); + sync(); } -void cf_outsw (unsigned short *addr, unsigned short *sect_buf, int words) +void cf_outsw(unsigned short *addr, unsigned short *sect_buf, int words) { int i; *pFIO_FLAG_S = CF_PF0; *pFIO_FLAG_C = CF_PF1; - asm ("ssync;"); + sync(); for (i = 0; i < words; i++) { *(addr) = *(sect_buf + i); - asm ("ssync;"); + sync(); } *pFIO_FLAG_C = CF_PF1_PF0; - asm ("ssync;"); + sync(); } #endif -void stamp_led_set (int LED1, int LED2, int LED3) +void stamp_led_set(int LED1, int LED2, int LED3) { *pFIO_INEN &= ~(PF2 | PF3 | PF4); *pFIO_DIR |= (PF2 | PF3 | PF4); @@ -233,31 +234,31 @@ void stamp_led_set (int LED1, int LED2, int LED3) *pFIO_FLAG_S = PF4; else *pFIO_FLAG_C = PF4; - asm ("ssync;"); + sync(); } -void show_boot_progress (int status) +void show_boot_progress(int status) { switch (status) { case 1: - stamp_led_set (STATUS_LED_OFF, STATUS_LED_OFF, STATUS_LED_ON); + stamp_led_set(STATUS_LED_OFF, STATUS_LED_OFF, STATUS_LED_ON); break; case 2: - stamp_led_set (STATUS_LED_OFF, STATUS_LED_ON, STATUS_LED_OFF); + stamp_led_set(STATUS_LED_OFF, STATUS_LED_ON, STATUS_LED_OFF); break; case 3: - stamp_led_set (STATUS_LED_OFF, STATUS_LED_ON, STATUS_LED_ON); + stamp_led_set(STATUS_LED_OFF, STATUS_LED_ON, STATUS_LED_ON); break; case 4: - stamp_led_set (STATUS_LED_ON, STATUS_LED_OFF, STATUS_LED_OFF); + stamp_led_set(STATUS_LED_ON, STATUS_LED_OFF, STATUS_LED_OFF); break; case 5: case 6: - stamp_led_set (STATUS_LED_ON, STATUS_LED_OFF, STATUS_LED_ON); + stamp_led_set(STATUS_LED_ON, STATUS_LED_OFF, STATUS_LED_ON); break; case 7: case 8: - stamp_led_set (STATUS_LED_ON, STATUS_LED_ON, STATUS_LED_OFF); + stamp_led_set(STATUS_LED_ON, STATUS_LED_ON, STATUS_LED_OFF); break; case 9: case 10: @@ -266,11 +267,10 @@ void show_boot_progress (int status) case 13: case 14: case 15: - stamp_led_set (STATUS_LED_OFF, STATUS_LED_OFF, - STATUS_LED_OFF); + stamp_led_set(STATUS_LED_OFF, STATUS_LED_OFF, STATUS_LED_OFF); break; default: - stamp_led_set (STATUS_LED_ON, STATUS_LED_ON, STATUS_LED_ON); + stamp_led_set(STATUS_LED_ON, STATUS_LED_ON, STATUS_LED_ON); break; } } diff --git a/board/stamp/stamp.h b/board/bf533-stamp/bf533-stamp.h index 7bc33b4..b2b51aa 100644 --- a/board/stamp/stamp.h +++ b/board/bf533-stamp/bf533-stamp.h @@ -36,7 +36,6 @@ extern volatile unsigned long *amgctl; extern unsigned long pll_div_fact; extern void serial_setbrg(void); -extern void pll_set(int vco, int crystal_frq, int pll_div); /* Definitions used in Compact Flash Boot support */ #define FIO_EDGE_CF_BITS 0x0000 diff --git a/board/stamp/config.mk b/board/bf533-stamp/config.mk index 0d00730..113438b 100644 --- a/board/stamp/config.mk +++ b/board/bf533-stamp/config.mk @@ -20,6 +20,6 @@ # Foundation, Inc., 59 Temple Place, Suite 330, Boston, # MA 02111-1307 USA # - +# TEXT_BASE should be defined as the MAX_SDRAM Address - 256k bytes +# 256k is defined as CFG_MONITOR_LEN in ./include/configs/<board>.h TEXT_BASE = 0x07FC0000 -PLATFORM_CPPFLAGS += -I$(TOPDIR) diff --git a/board/bf533-stamp/spi.c b/board/bf533-stamp/spi.c new file mode 100644 index 0000000..d30750f --- /dev/null +++ b/board/bf533-stamp/spi.c @@ -0,0 +1,473 @@ +/**************************************************************************** + * SPI flash driver for M25P64 + ****************************************************************************/ +#include <common.h> +#include <linux/ctype.h> +#include <asm/io.h> + +#if defined(CONFIG_SPI) + + /*Application definitions */ + +#define NUM_SECTORS 128 /* number of sectors */ +#define SECTOR_SIZE 0x10000 +#define NOP_NUM 1000 + +#define COMMON_SPI_SETTINGS (SPE|MSTR|CPHA|CPOL) /*Settings to the SPI_CTL */ +#define TIMOD01 (0x01) /*stes the SPI to work with core instructions */ + + /*Flash commands */ +#define SPI_WREN (0x06) /*Set Write Enable Latch */ +#define SPI_WRDI (0x04) /*Reset Write Enable Latch */ +#define SPI_RDSR (0x05) /*Read Status Register */ +#define SPI_WRSR (0x01) /*Write Status Register */ +#define SPI_READ (0x03) /*Read data from memory */ +#define SPI_PP (0x02) /*Program Data into memory */ +#define SPI_SE (0xD8) /*Erase one sector in memory */ +#define SPI_BE (0xC7) /*Erase all memory */ +#define WIP (0x1) /*Check the write in progress bit of the SPI status register */ +#define WEL (0x2) /*Check the write enable bit of the SPI status register */ + +#define TIMEOUT 350000000 + +typedef enum { + NO_ERR, + POLL_TIMEOUT, + INVALID_SECTOR, + INVALID_BLOCK, +} ERROR_CODE; + +void spi_init_f(void); +void spi_init_r(void); +ssize_t spi_read(uchar *, int, uchar *, int); +ssize_t spi_write(uchar *, int, uchar *, int); + +char ReadStatusRegister(void); +void Wait_For_SPIF(void); +void SetupSPI(const int spi_setting); +void SPI_OFF(void); +void SendSingleCommand(const int iCommand); + +ERROR_CODE GetSectorNumber(unsigned long ulOffset, int *pnSector); +ERROR_CODE EraseBlock(int nBlock); +ERROR_CODE ReadData(unsigned long ulStart, long lCount, int *pnData); +ERROR_CODE WriteData(unsigned long ulStart, long lCount, int *pnData); +ERROR_CODE Wait_For_Status(char Statusbit); +ERROR_CODE Wait_For_WEL(void); + +/* ------------------- + * Variables + * ------------------- */ + +/* ************************************************************************** + * + * Function: spi_init_f + * + * Description: Init SPI-Controller (ROM part) + * + * return: --- + * + * *********************************************************************** */ +void spi_init_f(void) +{ +} + +/* ************************************************************************** + * + * Function: spi_init_r + * + * Description: Init SPI-Controller (RAM part) - + * The malloc engine is ready and we can move our buffers to + * normal RAM + * + * return: --- + * + * *********************************************************************** */ +void spi_init_r(void) +{ + return; +} + +/**************************************************************************** + * Function: spi_write + **************************************************************************** */ +ssize_t spi_write(uchar * addr, int alen, uchar * buffer, int len) +{ + unsigned long offset; + int start_block, end_block; + int start_byte, end_byte; + ERROR_CODE result = NO_ERR; + uchar temp[SECTOR_SIZE]; + int i, num; + + offset = addr[0] << 16 | addr[1] << 8 | addr[2]; + /* Get the start block number */ + result = GetSectorNumber(offset, &start_block); + if (result == INVALID_SECTOR) { + printf("Invalid sector! "); + return 0; + } + /* Get the end block number */ + result = GetSectorNumber(offset + len - 1, &end_block); + if (result == INVALID_SECTOR) { + printf("Invalid sector! "); + return 0; + } + + for (num = start_block; num <= end_block; num++) { + ReadData(num * SECTOR_SIZE, SECTOR_SIZE, (int *)temp); + start_byte = num * SECTOR_SIZE; + end_byte = (num + 1) * SECTOR_SIZE - 1; + if (start_byte < offset) + start_byte = offset; + if (end_byte > (offset + len)) + end_byte = (offset + len - 1); + for (i = start_byte; i <= end_byte; i++) + temp[i - num * SECTOR_SIZE] = buffer[i - offset]; + EraseBlock(num); + result = WriteData(num * SECTOR_SIZE, SECTOR_SIZE, (int *)temp); + if (result != NO_ERR) + return 0; + printf("."); + } + return len; +} + +/**************************************************************************** + * Function: spi_read + **************************************************************************** */ +ssize_t spi_read(uchar * addr, int alen, uchar * buffer, int len) +{ + unsigned long offset; + offset = addr[0] << 16 | addr[1] << 8 | addr[2]; + ReadData(offset, len, (int *)buffer); + return len; +} + +void SendSingleCommand(const int iCommand) +{ + unsigned short dummy; + + /*turns on the SPI in single write mode */ + SetupSPI((COMMON_SPI_SETTINGS | TIMOD01)); + + /*sends the actual command to the SPI TX register */ + *pSPI_TDBR = iCommand; + sync(); + + /*The SPI status register will be polled to check the SPIF bit */ + Wait_For_SPIF(); + + dummy = *pSPI_RDBR; + + /*The SPI will be turned off */ + SPI_OFF(); + +} + +void SetupSPI(const int spi_setting) +{ + + if (icache_status() || dcache_status()) + udelay(CONFIG_CCLK_HZ / 50000000); + /*sets up the PF2 to be the slave select of the SPI */ + *pSPI_FLG = 0xFB04; + *pSPI_BAUD = CONFIG_SPI_BAUD; + *pSPI_CTL = spi_setting; + sync(); +} + +void SPI_OFF(void) +{ + + *pSPI_CTL = 0x0400; /* disable SPI */ + *pSPI_FLG = 0; + *pSPI_BAUD = 0; + sync(); + udelay(CONFIG_CCLK_HZ / 50000000); + +} + +void Wait_For_SPIF(void) +{ + unsigned short dummyread; + while ((*pSPI_STAT & TXS)) ; + while (!(*pSPI_STAT & SPIF)) ; + while (!(*pSPI_STAT & RXS)) ; + dummyread = *pSPI_RDBR; /* Read dummy to empty the receive register */ + +} + +ERROR_CODE Wait_For_WEL(void) +{ + int i; + char status_register = 0; + ERROR_CODE ErrorCode = NO_ERR; /* tells us if there was an error erasing flash */ + + for (i = 0; i < TIMEOUT; i++) { + status_register = ReadStatusRegister(); + if ((status_register & WEL)) { + ErrorCode = NO_ERR; /* tells us if there was an error erasing flash */ + break; + } + ErrorCode = POLL_TIMEOUT; /* Time out error */ + }; + + return ErrorCode; +} + +ERROR_CODE Wait_For_Status(char Statusbit) +{ + int i; + char status_register = 0xFF; + ERROR_CODE ErrorCode = NO_ERR; /* tells us if there was an error erasing flash */ + + for (i = 0; i < TIMEOUT; i++) { + status_register = ReadStatusRegister(); + if (!(status_register & Statusbit)) { + ErrorCode = NO_ERR; /* tells us if there was an error erasing flash */ + break; + } + ErrorCode = POLL_TIMEOUT; /* Time out error */ + }; + + return ErrorCode; +} + +char ReadStatusRegister(void) +{ + char status_register = 0; + + SetupSPI((COMMON_SPI_SETTINGS | TIMOD01)); /* Turn on the SPI */ + + *pSPI_TDBR = SPI_RDSR; /* send instruction to read status register */ + sync(); + Wait_For_SPIF(); /*wait until the instruction has been sent */ + *pSPI_TDBR = 0; /*send dummy to receive the status register */ + sync(); + Wait_For_SPIF(); /*wait until the data has been sent */ + status_register = *pSPI_RDBR; /*read the status register */ + + SPI_OFF(); /* Turn off the SPI */ + + return status_register; +} + +ERROR_CODE GetSectorNumber(unsigned long ulOffset, int *pnSector) +{ + int nSector = 0; + ERROR_CODE ErrorCode = NO_ERR; + + if (ulOffset > (NUM_SECTORS * 0x10000 - 1)) { + ErrorCode = INVALID_SECTOR; + return ErrorCode; + } + + nSector = (int)ulOffset / 0x10000; + *pnSector = nSector; + + /* ok */ + return ErrorCode; +} + +ERROR_CODE EraseBlock(int nBlock) +{ + unsigned long ulSectorOff = 0x0, ShiftValue; + ERROR_CODE ErrorCode = NO_ERR; + + /* if the block is invalid just return */ + if ((nBlock < 0) || (nBlock > NUM_SECTORS)) { + ErrorCode = INVALID_BLOCK; /* tells us if there was an error erasing flash */ + return ErrorCode; + } + /* figure out the offset of the block in flash */ + if ((nBlock >= 0) && (nBlock < NUM_SECTORS)) { + ulSectorOff = (nBlock * SECTOR_SIZE); + + } else { + ErrorCode = INVALID_BLOCK; /* tells us if there was an error erasing flash */ + return ErrorCode; + } + + /* A write enable instruction must previously have been executed */ + SendSingleCommand(SPI_WREN); + + /*The status register will be polled to check the write enable latch "WREN" */ + ErrorCode = Wait_For_WEL(); + + if (POLL_TIMEOUT == ErrorCode) { + printf("SPI Erase block error\n"); + return ErrorCode; + } else + /*Turn on the SPI to send single commands */ + SetupSPI((COMMON_SPI_SETTINGS | TIMOD01)); + + /* Send the erase block command to the flash followed by the 24 address */ + /* to point to the start of a sector. */ + *pSPI_TDBR = SPI_SE; + sync(); + Wait_For_SPIF(); + ShiftValue = (ulSectorOff >> 16); /* Send the highest byte of the 24 bit address at first */ + *pSPI_TDBR = ShiftValue; + sync(); + Wait_For_SPIF(); /* Wait until the instruction has been sent */ + ShiftValue = (ulSectorOff >> 8); /* Send the middle byte of the 24 bit address at second */ + *pSPI_TDBR = ShiftValue; + sync(); + Wait_For_SPIF(); /* Wait until the instruction has been sent */ + *pSPI_TDBR = ulSectorOff; /* Send the lowest byte of the 24 bit address finally */ + sync(); + Wait_For_SPIF(); /* Wait until the instruction has been sent */ + + /*Turns off the SPI */ + SPI_OFF(); + + /* Poll the status register to check the Write in Progress bit */ + /* Sector erase takes time */ + ErrorCode = Wait_For_Status(WIP); + + /* block erase should be complete */ + return ErrorCode; +} + +/***************************************************************************** +* ERROR_CODE ReadData() +* +* Read a value from flash for verify purpose +* +* Inputs: unsigned long ulStart - holds the SPI start address +* int pnData - pointer to store value read from flash +* long lCount - number of elements to read +***************************************************************************** */ +ERROR_CODE ReadData(unsigned long ulStart, long lCount, int *pnData) +{ + unsigned long ShiftValue; + char *cnData; + int i; + + cnData = (char *)pnData; /* Pointer cast to be able to increment byte wise */ + + /* Start SPI interface */ + SetupSPI((COMMON_SPI_SETTINGS | TIMOD01)); + + *pSPI_TDBR = SPI_READ; /* Send the read command to SPI device */ + sync(); + Wait_For_SPIF(); /* Wait until the instruction has been sent */ + ShiftValue = (ulStart >> 16); /* Send the highest byte of the 24 bit address at first */ + *pSPI_TDBR = ShiftValue; /* Send the byte to the SPI device */ + sync(); + Wait_For_SPIF(); /* Wait until the instruction has been sent */ + ShiftValue = (ulStart >> 8); /* Send the middle byte of the 24 bit address at second */ + *pSPI_TDBR = ShiftValue; /* Send the byte to the SPI device */ + sync(); + Wait_For_SPIF(); /* Wait until the instruction has been sent */ + *pSPI_TDBR = ulStart; /* Send the lowest byte of the 24 bit address finally */ + sync(); + Wait_For_SPIF(); /* Wait until the instruction has been sent */ + + /* After the SPI device address has been placed on the MOSI pin the data can be */ + /* received on the MISO pin. */ + for (i = 0; i < lCount; i++) { + *pSPI_TDBR = 0; /*send dummy */ + sync(); + while (!(*pSPI_STAT & RXS)) ; + *cnData++ = *pSPI_RDBR; /*read */ + + if ((i >= SECTOR_SIZE) && (i % SECTOR_SIZE == 0)) + printf("."); + } + + SPI_OFF(); /* Turn off the SPI */ + + return NO_ERR; +} + +ERROR_CODE WriteFlash(unsigned long ulStartAddr, long lTransferCount, + int *iDataSource, long *lWriteCount) +{ + + unsigned long ulWAddr; + long lWTransferCount = 0; + int i; + char iData; + char *temp = (char *)iDataSource; + ERROR_CODE ErrorCode = NO_ERR; /* tells us if there was an error erasing flash */ + + /* First, a Write Enable Command must be sent to the SPI. */ + SendSingleCommand(SPI_WREN); + + /* Second, the SPI Status Register will be tested whether the */ + /* Write Enable Bit has been set. */ + ErrorCode = Wait_For_WEL(); + if (POLL_TIMEOUT == ErrorCode) { + printf("SPI Write Time Out\n"); + return ErrorCode; + } else + /* Third, the 24 bit address will be shifted out the SPI MOSI bytewise. */ + SetupSPI((COMMON_SPI_SETTINGS | TIMOD01)); /* Turns the SPI on */ + *pSPI_TDBR = SPI_PP; + sync(); + Wait_For_SPIF(); /*wait until the instruction has been sent */ + ulWAddr = (ulStartAddr >> 16); + *pSPI_TDBR = ulWAddr; + sync(); + Wait_For_SPIF(); /*wait until the instruction has been sent */ + ulWAddr = (ulStartAddr >> 8); + *pSPI_TDBR = ulWAddr; + sync(); + Wait_For_SPIF(); /*wait until the instruction has been sent */ + ulWAddr = ulStartAddr; + *pSPI_TDBR = ulWAddr; + sync(); + Wait_For_SPIF(); /*wait until the instruction has been sent */ + /* Fourth, maximum number of 256 bytes will be taken from the Buffer */ + /* and sent to the SPI device. */ + for (i = 0; (i < lTransferCount) && (i < 256); i++, lWTransferCount++) { + iData = *temp; + *pSPI_TDBR = iData; + sync(); + Wait_For_SPIF(); /*wait until the instruction has been sent */ + temp++; + } + + SPI_OFF(); /* Turns the SPI off */ + + /* Sixth, the SPI Write in Progress Bit must be toggled to ensure the */ + /* programming is done before start of next transfer. */ + ErrorCode = Wait_For_Status(WIP); + + if (POLL_TIMEOUT == ErrorCode) { + printf("SPI Program Time out!\n"); + return ErrorCode; + } else + + *lWriteCount = lWTransferCount; + + return ErrorCode; +} + +ERROR_CODE WriteData(unsigned long ulStart, long lCount, int *pnData) +{ + + unsigned long ulWStart = ulStart; + long lWCount = lCount, lWriteCount; + long *pnWriteCount = &lWriteCount; + + ERROR_CODE ErrorCode = NO_ERR; + + while (lWCount != 0) { + ErrorCode = WriteFlash(ulWStart, lWCount, pnData, pnWriteCount); + + /* After each function call of WriteFlash the counter must be adjusted */ + lWCount -= *pnWriteCount; + + /* Also, both address pointers must be recalculated. */ + ulWStart += *pnWriteCount; + pnData += *pnWriteCount / 4; + } + + /* return the appropriate error code */ + return ErrorCode; +} + +#endif /* CONFIG_SPI */ diff --git a/board/stamp/u-boot.lds b/board/bf533-stamp/u-boot.lds.S index 9a22e50..03ef72b 100644 --- a/board/stamp/u-boot.lds +++ b/board/bf533-stamp/u-boot.lds.S @@ -1,7 +1,7 @@ /* - * U-boot - u-boot.lds + * U-boot - u-boot.lds.S * - * Copyright (c) 2005 blackfin.uclinux.org + * Copyright (c) 2005-2007 Analog Device Inc. * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -25,6 +25,8 @@ * MA 02111-1307 USA */ +#include <config.h> + OUTPUT_ARCH(bfin) SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); /* Do we need any of these for elf? @@ -55,6 +57,7 @@ SECTIONS .rela.plt : { *(.rela.plt) } .init : { *(.init) } .plt : { *(.plt) } + . = CFG_MONITOR_BASE; .text : { /* WARNING - the following is hand-optimized to fit within */ @@ -68,9 +71,11 @@ SECTIONS cpu/bf533/interrupt.o (.text) cpu/bf533/serial.o (.text) common/dlmalloc.o (.text) - lib_generic/vsprintf.o (.text) +/* lib_blackfin/bf533_string.o (.text) */ +/* lib_generic/vsprintf.o (.text) */ lib_generic/crc32.o (.text) - lib_generic/zlib.o (.text) +/* lib_generic/zlib.o (.text) */ +/* board/stamp/stamp.o (.text) */ . = DEFINED(env_offset) ? env_offset : .; common/environment.o (.text) @@ -118,9 +123,9 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; + ___u_boot_cmd_start = .; .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + ___u_boot_cmd_end = .; __start___ex_table = .; diff --git a/board/bf537-stamp/Makefile b/board/bf537-stamp/Makefile new file mode 100644 index 0000000..e488844 --- /dev/null +++ b/board/bf537-stamp/Makefile @@ -0,0 +1,58 @@ +# +# U-boot - Makefile +# +# Copyright (c) 2005-2007 Analog Device Inc. +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o flash.o ether_bf537.o post-memory.o stm_m25p64.o cmd_bf537led.o nand.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) u-boot.lds + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +u-boot.lds: u-boot.lds.S + $(CPP) $(CPPFLAGS) -P -Ubfin $^ > $@.tmp + mv -f $@.tmp $@ + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/bf537-stamp/bf537-stamp.c b/board/bf537-stamp/bf537-stamp.c new file mode 100644 index 0000000..cc4e998 --- /dev/null +++ b/board/bf537-stamp/bf537-stamp.c @@ -0,0 +1,437 @@ +/* + * U-boot - BF537.c + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <config.h> +#include <command.h> +#include <asm/blackfin.h> +#include <asm/io.h> +#include "ether_bf537.h" + +#define POST_WORD_ADDR 0xFF903FFC + +/* + * the bootldr command loads an address, checks to see if there + * is a Boot stream that the on-chip BOOTROM can understand, + * and loads it via the BOOTROM Callback. It is possible + * to also add booting from SPI, or TWI, but this function does + * not currently support that. + */ +int do_bootldr(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + ulong addr, entry; + ulong *data; + + /* Get the address */ + if (argc < 2) { + addr = load_addr; + } else { + addr = simple_strtoul(argv[1], NULL, 16); + } + + /* Check if it is a LDR file */ + data = (ulong *) addr; + if (*data == 0xFF800060 || *data == 0xFF800040 || *data == 0xFF800020) { + /* We want to boot from FLASH or SDRAM */ + entry = _BOOTROM_BOOT_DXE_FLASH; + printf("## Booting ldr image at 0x%08lx ...\n", addr); + if (icache_status()) + icache_disable(); + if (dcache_status()) + dcache_disable(); + + __asm__("R7=%[a];\n" "P0=%[b];\n" "JUMP (P0);\n": + :[a] "d"(addr),[b] "a"(entry) + :"R7", "P0"); + + } else { + printf("## No ldr image at address 0x%08lx\n", addr); + } + + return 0; +} + +U_BOOT_CMD(bootldr, 2, 0, do_bootldr, + "bootldr - boot ldr image from memory\n", + "[addr]\n - boot ldr image stored in memory\n"); + +int checkboard(void) +{ +#if (BFIN_CPU == ADSP_BF534) + printf("CPU: ADSP BF534 Rev.: 0.%d\n", *pCHIPID >> 28); +#elif (BFIN_CPU == ADSP_BF536) + printf("CPU: ADSP BF536 Rev.: 0.%d\n", *pCHIPID >> 28); +#else + printf("CPU: ADSP BF537 Rev.: 0.%d\n", *pCHIPID >> 28); +#endif + printf("Board: ADI BF537 stamp board\n"); + printf(" Support: http://blackfin.uclinux.org/\n"); + return 0; +} + +#if defined(CONFIG_BFIN_IDE) + +void cf_outb(unsigned char val, volatile unsigned char *addr) +{ + *(addr) = val; + sync(); +} + +unsigned char cf_inb(volatile unsigned char *addr) +{ + volatile unsigned char c; + + c = *(addr); + sync(); + + return c; +} + +void cf_insw(unsigned short *sect_buf, unsigned short *addr, int words) +{ + int i; + + for (i = 0; i < words; i++) + *(sect_buf + i) = *(addr); + sync(); +} + +void cf_outsw(unsigned short *addr, unsigned short *sect_buf, int words) +{ + int i; + + for (i = 0; i < words; i++) + *(addr) = *(sect_buf + i); + sync(); +} +#endif /* CONFIG_BFIN_IDE */ + +long int initdram(int board_type) +{ + DECLARE_GLOBAL_DATA_PTR; +#ifdef DEBUG + int brate; + char *tmp = getenv("baudrate"); + brate = simple_strtoul(tmp, NULL, 16); + printf("Serial Port initialized with Baud rate = %x\n", brate); + printf("SDRAM attributes:\n"); + printf("tRCD %d SCLK Cycles,tRP %d SCLK Cycles,tRAS %d SCLK Cycles" + "tWR %d SCLK Cycles,CAS Latency %d SCLK cycles \n", + 3, 3, 6, 2, 3); + printf("SDRAM Begin: 0x%x\n", CFG_SDRAM_BASE); + printf("Bank size = %d MB\n", CFG_MAX_RAM_SIZE >> 20); +#endif + gd->bd->bi_memstart = CFG_SDRAM_BASE; + gd->bd->bi_memsize = CFG_MAX_RAM_SIZE; + return CFG_MAX_RAM_SIZE; +} + +#if defined(CONFIG_MISC_INIT_R) +/* miscellaneous platform dependent initialisations */ +int misc_init_r(void) +{ +#if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT) + char nid[32]; + unsigned char *pMACaddr = (unsigned char *)0x203F0000; + u8 SrcAddr[6] = { 0x02, 0x80, 0xAD, 0x20, 0x31, 0xB8 }; + +#if (CONFIG_COMMANDS & CFG_CMD_NET) + /* The 0xFF check here is to make sure we don't use the address + * in flash if it's simply been erased (aka all 0xFF values) */ + if (getenv("ethaddr") == NULL && is_valid_ether_addr(pMACaddr)) { + sprintf(nid, "%02x:%02x:%02x:%02x:%02x:%02x", + pMACaddr[0], pMACaddr[1], + pMACaddr[2], pMACaddr[3], pMACaddr[4], pMACaddr[5]); + setenv("ethaddr", nid); + } + if (getenv("ethaddr")) { + SetupMacAddr(SrcAddr); + } +#endif /* CONFIG_COMMANDS & CFG_CMD_NET */ +#endif /* BFIN_BOOT_MODE == BF537_BYPASS_BOOT */ + +#if defined(CONFIG_BFIN_IDE) +#if defined(CONFIG_BFIN_TRUE_IDE) + /* Enable ATASEL when in True IDE mode */ + printf("Using CF True IDE Mode\n"); + cf_outb(0, (unsigned char *)CONFIG_CF_ATASEL_ENA); + udelay(1000); +#elif defined(CONFIG_BFIN_CF_IDE) + /* Disable ATASEL when we're in Common Memory Mode */ + printf("Using CF Common Memory Mode\n"); + cf_outb(0, (unsigned char *)CONFIG_CF_ATASEL_DIS); + udelay(1000); +#elif defined(CONFIG_BFIN_HDD_IDE) + printf("Using HDD IDE Mode\n"); +#endif + ide_init(); +#endif /* CONFIG_BFIN_IDE */ + return 0; +} +#endif /* CONFIG_MISC_INIT_R */ + +#ifdef CONFIG_POST +#if (BFIN_BOOT_MODE != BF537_BYPASS_BOOT) +/* Using sw10-PF5 as the hotkey */ +int post_hotkeys_pressed(void) +{ + return 0; +} +#else +/* Using sw10-PF5 as the hotkey */ +int post_hotkeys_pressed(void) +{ + int delay = 3; + int i; + unsigned short value; + + *pPORTF_FER &= ~PF5; + *pPORTFIO_DIR &= ~PF5; + *pPORTFIO_INEN |= PF5; + + printf("########Press SW10 to enter Memory POST########: %2d ", delay); + while (delay--) { + for (i = 0; i < 100; i++) { + value = *pPORTFIO & PF5; + if (value != 0) { + break; + } + udelay(10000); + } + printf("\b\b\b%2d ", delay); + } + printf("\b\b\b 0"); + printf("\n"); + if (value == 0) + return 0; + else { + printf("Hotkey has been pressed, Enter POST . . . . . .\n"); + return 1; + } +} +#endif +#endif + +#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER) +void post_word_store(ulong a) +{ + volatile ulong *save_addr = (volatile ulong *)POST_WORD_ADDR; + *save_addr = a; +} + +ulong post_word_load(void) +{ + volatile ulong *save_addr = (volatile ulong *)POST_WORD_ADDR; + return *save_addr; +} +#endif + +#ifdef CONFIG_POST +int uart_post_test(int flags) +{ + return 0; +} + +#define BLOCK_SIZE 0x10000 +#define VERIFY_ADDR 0x2000000 +extern int erase_block_flash(int); +extern int write_data(long lStart, long lCount, uchar * pnData); +int flash_post_test(int flags) +{ + unsigned short *pbuf, *temp; + int offset, n, i; + int value = 0; + int result = 0; + printf("\n"); + pbuf = (unsigned short *)VERIFY_ADDR; + temp = pbuf; + for (n = FLASH_START_POST_BLOCK; n < FLASH_END_POST_BLOCK; n++) { + offset = (n - 7) * BLOCK_SIZE; + printf("--------Erase block:%2d..", n); + erase_block_flash(n); + printf("OK\r"); + printf("--------Program block:%2d...", n); + write_data(CFG_FLASH_BASE + offset, BLOCK_SIZE, pbuf); + printf("OK\r"); + printf("--------Verify block:%2d...", n); + for (i = 0; i < BLOCK_SIZE; i += 2) { + if (*(unsigned short *)(CFG_FLASH_BASE + offset + i) != + *temp++) { + value = 1; + result = 1; + } + } + if (value) + printf("failed\n"); + else + printf("OK %3d%%\r", + (int)( + (n + 1 - + FLASH_START_POST_BLOCK) * + 100 / (FLASH_END_POST_BLOCK - + FLASH_START_POST_BLOCK))); + + temp = pbuf; + value = 0; + } + printf("\n"); + if (result) + return -1; + else + return 0; +} + +/**************************************************** + * LED1 ---- PF6 LED2 ---- PF7 * + * LED3 ---- PF8 LED4 ---- PF9 * + * LED5 ---- PF10 LED6 ---- PF11 * + ****************************************************/ +int led_post_test(int flags) +{ + *pPORTF_FER &= ~(PF6 | PF7 | PF8 | PF9 | PF10 | PF11); + *pPORTFIO_DIR |= PF6 | PF7 | PF8 | PF9 | PF10 | PF11; + *pPORTFIO_INEN &= ~(PF6 | PF7 | PF8 | PF9 | PF10 | PF11); + *pPORTFIO &= ~(PF6 | PF7 | PF8 | PF9 | PF10 | PF11); + udelay(1000000); + printf("LED1 on"); + *pPORTFIO |= PF6; + udelay(1000000); + printf("\b\b\b\b\b\b\b"); + printf("LED2 on"); + *pPORTFIO |= PF7; + udelay(1000000); + printf("\b\b\b\b\b\b\b"); + printf("LED3 on"); + *pPORTFIO |= PF8; + udelay(1000000); + printf("\b\b\b\b\b\b\b"); + printf("LED4 on"); + *pPORTFIO |= PF9; + udelay(1000000); + printf("\b\b\b\b\b\b\b"); + printf("LED5 on"); + *pPORTFIO |= PF10; + udelay(1000000); + printf("\b\b\b\b\b\b\b"); + printf("lED6 on"); + *pPORTFIO |= PF11; + printf("\b\b\b\b\b\b\b "); + return 0; +} + +/************************************************ + * SW10 ---- PF5 SW11 ---- PF4 * + * SW12 ---- PF3 SW13 ---- PF2 * + ************************************************/ +int button_post_test(int flags) +{ + int i, delay = 5; + unsigned short value = 0; + int result = 0; + + *pPORTF_FER &= ~(PF5 | PF4 | PF3 | PF2); + *pPORTFIO_DIR &= ~(PF5 | PF4 | PF3 | PF2); + *pPORTFIO_INEN |= (PF5 | PF4 | PF3 | PF2); + + printf("\n--------Press SW10: %2d ", delay); + while (delay--) { + for (i = 0; i < 100; i++) { + value = *pPORTFIO & PF5; + if (value != 0) { + break; + } + udelay(10000); + } + printf("\b\b\b%2d ", delay); + } + if (value != 0) + printf("\b\bOK"); + else { + result = -1; + printf("\b\bfailed"); + } + + delay = 5; + printf("\n--------Press SW11: %2d ", delay); + while (delay--) { + for (i = 0; i < 100; i++) { + value = *pPORTFIO & PF4; + if (value != 0) { + break; + } + udelay(10000); + } + printf("\b\b\b%2d ", delay); + } + if (value != 0) + printf("\b\bOK"); + else { + result = -1; + printf("\b\bfailed"); + } + + delay = 5; + printf("\n--------Press SW12: %2d ", delay); + while (delay--) { + for (i = 0; i < 100; i++) { + value = *pPORTFIO & PF3; + if (value != 0) { + break; + } + udelay(10000); + } + printf("\b\b\b%2d ", delay); + } + if (value != 0) + printf("\b\bOK"); + else { + result = -1; + printf("\b\bfailed"); + } + + delay = 5; + printf("\n--------Press SW13: %2d ", delay); + while (delay--) { + for (i = 0; i < 100; i++) { + value = *pPORTFIO & PF2; + if (value != 0) { + break; + } + udelay(10000); + } + printf("\b\b\b%2d ", delay); + } + if (value != 0) + printf("\b\bOK"); + else { + result = -1; + printf("\b\bfailed"); + } + printf("\n"); + return result; +} +#endif diff --git a/board/bf537-stamp/cmd_bf537led.c b/board/bf537-stamp/cmd_bf537led.c new file mode 100644 index 0000000..fa650f2 --- /dev/null +++ b/board/bf537-stamp/cmd_bf537led.c @@ -0,0 +1,201 @@ +/* + * U-boot - cmd_bf537led.c + * + * Copyright (C) 2006 Aaron Gage, Ocean Optics Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <config.h> +#include <command.h> +#include <asm/blackfin.h> +#include <asm-blackfin/string.h> +#ifdef CONFIG_BF537_STAMP_LEDCMD + +/* Define the command usage in a reusable way */ +#define USAGE_LONG \ + "led <number> <action>\n" \ + " <number> - Index (0-5) of LED to change, or \"all\"\n" \ + " <action> - Must be one of:\n" \ + " on off toggle\n" + +/* Number of LEDs supported by the board */ +#define NUMBER_LEDS 6 +/* The BF537 stamp has 6 LEDs. This mask indicates that all should be lit. */ +#define LED_ALL_MASK 0x003F + +void show_cmd_usage(void); +void set_led_state(int index, int state); +void configure_GPIO_to_output(int index); + +/* Map of LEDs according to their GPIO ports. This can be rearranged or + * otherwise changed to account for different GPIO configurations. + */ +int led_ports[] = { PF6, PF7, PF8, PF9, PF10, PF11 }; + +#define ACTION_TOGGLE -1 +#define ACTION_OFF 0 +#define ACTION_ON 1 + +#define LED_STATE_OFF 0 +#define LED_STATE_ON 1 + +/* This is a trivial atoi implementation since we don't have one available */ +int atoi(char *string) +{ + int length; + int retval = 0; + int i; + int sign = 1; + + length = strlen(string); + for (i = 0; i < length; i++) { + if (0 == i && string[0] == '-') { + sign = -1; + continue; + } + if (string[i] > '9' || string[i] < '0') { + break; + } + retval *= 10; + retval += string[i] - '0'; + } + retval *= sign; + return retval; +} + +int do_bf537led(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + int led_mask = 0; + int led_current_state = 0; + int action = ACTION_OFF; + int temp; + + if (3 != argc) { + /* Not enough arguments, so just show usage information */ + show_cmd_usage(); + return 1; + } + + if (strcmp(argv[1], "all") == 0) { + led_mask = LED_ALL_MASK; + } else { + temp = atoi(argv[1]); + if (temp < 0 || temp >= NUMBER_LEDS) { + printf("Invalid LED number [%s]\n", argv[1]); + show_cmd_usage(); + return 2; + } + led_mask |= (1 << temp); + } + + if (strcmp(argv[2], "off") == 0) { + action = ACTION_OFF; + } else if (strcmp(argv[2], "on") == 0) { + action = ACTION_ON; + } else if (strcmp(argv[2], "toggle") == 0) { + action = ACTION_TOGGLE; + } else { + printf("Invalid action [%s]\n", argv[2]); + show_cmd_usage(); + return 3; + } + + for (temp = 0; temp < NUMBER_LEDS; temp++) { + if ((led_mask & (1 << temp)) > 0) { + /* + * It is possible that the user has wired one of PF6-PF11 to + * something other than an LED, so this will only change a pin + * to output if the user has indicated a state change. This may + * happen a lot, but this way is safer than just setting all pins + * to output. + */ + configure_GPIO_to_output(temp); + + led_current_state = + ((*pPORTFIO & led_ports[temp]) > + 0) ? LED_STATE_ON : LED_STATE_OFF; + /* + printf("LED state for index %d (%x) is %d\n", temp, led_ports[temp], + led_current_state); + printf("*pPORTFIO is %x\n", *pPORTFIO); + */ + if (ACTION_ON == action + || (ACTION_TOGGLE == action + && 0 == led_current_state)) { + printf("Turning LED %d on\n", temp); + set_led_state(temp, LED_STATE_ON); + } else { + printf("Turning LED %d off\n", temp); + set_led_state(temp, LED_STATE_OFF); + } + } + } + + return 0; +} + +/* + * The GPIO pins that go to the LEDs on the BF537 stamp must be configured + * as output. This function simply configures them that way. This could + * be done to all of the GPIO lines at once, but if a user is using a + * custom board, this will try to be nice and only change the GPIO lines + * that the user specifically names. + */ +void configure_GPIO_to_output(int index) +{ + int port; + + port = led_ports[index]; + + /* Clear the Port F Function Enable Register */ + *pPORTF_FER &= ~port; + /* Set the Port F I/O direction register */ + *pPORTFIO_DIR |= port; + /* Clear the Port F I/O Input Enable Register */ + *pPORTFIO_INEN &= ~port; +} + +/* Enforce the given state on the GPIO line for the indicated LED */ +void set_led_state(int index, int state) +{ + int port; + + port = led_ports[index]; + + if (LED_STATE_OFF == state) { + /* Clear the bit to turn off the LED */ + *pPORTFIO &= ~port; + } else { + /* Set the bit to turn on the LED */ + *pPORTFIO |= port; + } +} + +/* Display usage information */ +void show_cmd_usage() +{ + printf("Usage:\n%s", USAGE_LONG); +} + +/* Register information for u-boot to find this command */ +U_BOOT_CMD(led, 3, 1, do_bf537led, + "led- Control BF537 stamp LEDs\n", USAGE_LONG); + +#endif diff --git a/board/bf537-stamp/config.mk b/board/bf537-stamp/config.mk new file mode 100644 index 0000000..a623c3d --- /dev/null +++ b/board/bf537-stamp/config.mk @@ -0,0 +1,25 @@ +# +# (C) Copyright 2001 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# TEXT_BASE should be defined as the MAX_SDRAM Address - 256k bytes +# 256k is defined as CFG_MONITOR_LEN in ./include/configs/<board>.h +TEXT_BASE = 0x03FC0000 diff --git a/board/bf537-stamp/ether_bf537.c b/board/bf537-stamp/ether_bf537.c new file mode 100644 index 0000000..f00837a --- /dev/null +++ b/board/bf537-stamp/ether_bf537.c @@ -0,0 +1,545 @@ +/* + * ADI Blackfin 537 MAC Ethernet + * + * Copyright (c) 2005 Analog Device, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <config.h> +#include <asm/blackfin.h> +#include <net.h> +#include <command.h> +#include <malloc.h> +#include "ether_bf537.h" + +#ifdef CONFIG_POST +#include <post.h> +#endif + +#undef DEBUG_ETHERNET + +#ifdef DEBUG_ETHERNET +#define DEBUGF(fmt,args...) printf(fmt,##args) +#else +#define DEBUGF(fmt,args...) +#endif + +#if (CONFIG_COMMANDS & CFG_CMD_NET) + +#define RXBUF_BASE_ADDR 0xFF900000 +#define TXBUF_BASE_ADDR 0xFF800000 +#define TX_BUF_CNT 1 + +#define TOUT_LOOP 1000000 + +ADI_ETHER_BUFFER *txbuf[TX_BUF_CNT]; +ADI_ETHER_BUFFER *rxbuf[PKTBUFSRX]; +static u16 txIdx; /* index of the current RX buffer */ +static u16 rxIdx; /* index of the current TX buffer */ + +u8 SrcAddr[6]; +u16 PHYregs[NO_PHY_REGS]; /* u16 PHYADDR; */ + +/* DMAx_CONFIG values at DMA Restart */ +const ADI_DMA_CONFIG_REG rxdmacfg = { 1, 1, 2, 0, 0, 0, 0, 5, 7 }; + +#if 0 + rxdmacfg.b_DMA_EN = 1; /* enabled */ + rxdmacfg.b_WNR = 1; /* write to memory */ + rxdmacfg.b_WDSIZE = 2; /* wordsize is 32 bits */ + rxdmacfg.b_DMA2D = 0; /* N/A */ + rxdmacfg.b_RESTART= 0; /* N/A */ + rxdmacfg.b_DI_SEL = 0; /* N/A */ + rxdmacfg.b_DI_EN = 0; /* no interrupt */ + rxdmacfg.b_NDSIZE = 5; /* 5 half words is desc size. */ + rxdmacfg.b_FLOW = 7; /* large desc flow */ +#endif + +const ADI_DMA_CONFIG_REG txdmacfg = { 1, 0, 2, 0, 0, 0, 0, 5, 7 }; + +#if 0 + txdmacfg.b_DMA_EN = 1; /* enabled */ + txdmacfg.b_WNR = 0; /* read from memory */ + txdmacfg.b_WDSIZE = 2; /* wordsize is 32 bits */ + txdmacfg.b_DMA2D = 0; /* N/A */ + txdmacfg.b_RESTART= 0; /* N/A */ + txdmacfg.b_DI_SEL = 0; /* N/A */ + txdmacfg.b_DI_EN = 0; /* no interrupt */ + txdmacfg.b_NDSIZE = 5; /* 5 half words is desc size. */ + txdmacfg.b_FLOW = 7; /* large desc flow */ +#endif + +ADI_ETHER_BUFFER *SetupRxBuffer(int no); +ADI_ETHER_BUFFER *SetupTxBuffer(int no); + +static int bfin_EMAC_init(struct eth_device *dev, bd_t * bd); +static void bfin_EMAC_halt(struct eth_device *dev); +static int bfin_EMAC_send(struct eth_device *dev, volatile void *packet, + int length); +static int bfin_EMAC_recv(struct eth_device *dev); + +int bfin_EMAC_initialize(bd_t * bis) +{ + struct eth_device *dev; + dev = (struct eth_device *)malloc(sizeof(*dev)); + if (dev == NULL) + hang(); + + memset(dev, 0, sizeof(*dev)); + sprintf(dev->name, "BF537 ETHERNET"); + + dev->iobase = 0; + dev->priv = 0; + dev->init = bfin_EMAC_init; + dev->halt = bfin_EMAC_halt; + dev->send = bfin_EMAC_send; + dev->recv = bfin_EMAC_recv; + + eth_register(dev); + + return 1; +} + +static int bfin_EMAC_send(struct eth_device *dev, volatile void *packet, + int length) +{ + int i; + int result = 0; + unsigned int *buf; + buf = (unsigned int *)packet; + + if (length <= 0) { + printf("Ethernet: bad packet size: %d\n", length); + goto out; + } + + if ((*pDMA2_IRQ_STATUS & DMA_ERR) != 0) { + printf("Ethernet: tx DMA error\n"); + goto out; + } + + for (i = 0; (*pDMA2_IRQ_STATUS & DMA_RUN) != 0; i++) { + if (i > TOUT_LOOP) { + puts("Ethernet: tx time out\n"); + goto out; + } + } + txbuf[txIdx]->FrmData->NoBytes = length; + memcpy(txbuf[txIdx]->FrmData->Dest, (void *)packet, length); + txbuf[txIdx]->Dma[0].START_ADDR = (u32) txbuf[txIdx]->FrmData; + *pDMA2_NEXT_DESC_PTR = &txbuf[txIdx]->Dma[0]; + *pDMA2_CONFIG = *(u16 *) (void *)(&txdmacfg); + *pEMAC_OPMODE |= TE; + + for (i = 0; (txbuf[txIdx]->StatusWord & TX_COMP) == 0; i++) { + if (i > TOUT_LOOP) { + puts("Ethernet: tx error\n"); + goto out; + } + } + result = txbuf[txIdx]->StatusWord; + txbuf[txIdx]->StatusWord = 0; + if ((txIdx + 1) >= TX_BUF_CNT) + txIdx = 0; + else + txIdx++; + out: + DEBUGF("BFIN EMAC send: length = %d\n", length); + return result; +} + +static int bfin_EMAC_recv(struct eth_device *dev) +{ + int length = 0; + + for (;;) { + if ((rxbuf[rxIdx]->StatusWord & RX_COMP) == 0) { + length = -1; + break; + } + if ((rxbuf[rxIdx]->StatusWord & RX_DMAO) != 0) { + printf("Ethernet: rx dma overrun\n"); + break; + } + if ((rxbuf[rxIdx]->StatusWord & RX_OK) == 0) { + printf("Ethernet: rx error\n"); + break; + } + length = rxbuf[rxIdx]->StatusWord & 0x000007FF; + if (length <= 4) { + printf("Ethernet: bad frame\n"); + break; + } + NetRxPackets[rxIdx] = + (volatile uchar *)(rxbuf[rxIdx]->FrmData->Dest); + NetReceive(NetRxPackets[rxIdx], length - 4); + *pDMA1_IRQ_STATUS |= DMA_DONE | DMA_ERR; + rxbuf[rxIdx]->StatusWord = 0x00000000; + if ((rxIdx + 1) >= PKTBUFSRX) + rxIdx = 0; + else + rxIdx++; + } + + return length; +} + +/************************************************************** + * + * Ethernet Initialization Routine + * + *************************************************************/ + +static int bfin_EMAC_init(struct eth_device *dev, bd_t * bd) +{ + u32 opmode; + int dat; + int i; + DEBUGF("Eth_init: ......\n"); + + txIdx = 0; + rxIdx = 0; + +/* Initialize System Register */ + if (SetupSystemRegs(&dat) < 0) + return -1; + +/* Initialize EMAC address */ + SetupMacAddr(SrcAddr); + +/* Initialize TX and RX buffer */ + for (i = 0; i < PKTBUFSRX; i++) { + rxbuf[i] = SetupRxBuffer(i); + if (i > 0) { + rxbuf[i - 1]->Dma[1].NEXT_DESC_PTR = + &(rxbuf[i]->Dma[0]); + if (i == (PKTBUFSRX - 1)) + rxbuf[i]->Dma[1].NEXT_DESC_PTR = + &(rxbuf[0]->Dma[0]); + } + } + for (i = 0; i < TX_BUF_CNT; i++) { + txbuf[i] = SetupTxBuffer(i); + if (i > 0) { + txbuf[i - 1]->Dma[1].NEXT_DESC_PTR = + &(txbuf[i]->Dma[0]); + if (i == (TX_BUF_CNT - 1)) + txbuf[i]->Dma[1].NEXT_DESC_PTR = + &(txbuf[0]->Dma[0]); + } + } + + /* Set RX DMA */ + *pDMA1_NEXT_DESC_PTR = &rxbuf[0]->Dma[0]; + *pDMA1_CONFIG = *((u16 *) (void *)&rxbuf[0]->Dma[0].CONFIG); + + /* Wait MII done */ + PollMdcDone(); + + /* We enable only RX here */ + /* ASTP : Enable Automatic Pad Stripping + PR : Promiscuous Mode for test + PSF : Receive frames with total length less than 64 bytes. + FDMODE : Full Duplex Mode + LB : Internal Loopback for test + RE : Receiver Enable */ + if (dat == FDMODE) + opmode = ASTP | FDMODE | PSF; + else + opmode = ASTP | PSF; + opmode |= RE; +#ifdef CONFIG_BFIN_MAC_RMII + opmode |= TE | RMII; +#endif + /* Turn on the EMAC */ + *pEMAC_OPMODE = opmode; + return 0; +} + +static void bfin_EMAC_halt(struct eth_device *dev) +{ + DEBUGF("Eth_halt: ......\n"); + /* Turn off the EMAC */ + *pEMAC_OPMODE = 0x00000000; + /* Turn off the EMAC RX DMA */ + *pDMA1_CONFIG = 0x0000; + *pDMA2_CONFIG = 0x0000; + +} + +void SetupMacAddr(u8 * MACaddr) +{ + char *tmp, *end; + int i; + /* this depends on a little-endian machine */ + tmp = getenv("ethaddr"); + if (tmp) { + for (i = 0; i < 6; i++) { + MACaddr[i] = tmp ? simple_strtoul(tmp, &end, 16) : 0; + if (tmp) + tmp = (*end) ? end + 1 : end; + } + +#ifndef CONFIG_NETCONSOLE + printf("Using MAC Address %02X:%02X:%02X:%02X:%02X:%02X\n", + MACaddr[0], MACaddr[1], + MACaddr[2], MACaddr[3], MACaddr[4], MACaddr[5]); +#endif + *pEMAC_ADDRLO = MACaddr[0] | MACaddr[1] << 8 | + MACaddr[2] << 16 | MACaddr[3] << 24; + *pEMAC_ADDRHI = MACaddr[4] | MACaddr[5] << 8; + } +} + +void PollMdcDone(void) +{ + /* poll the STABUSY bit */ + while (*pEMAC_STAADD & STABUSY) ; +} + +void WrPHYReg(u16 PHYAddr, u16 RegAddr, u16 Data) +{ + PollMdcDone(); + + *pEMAC_STADAT = Data; + + *pEMAC_STAADD = SET_PHYAD(PHYAddr) | SET_REGAD(RegAddr) | + STAOP | STAIE | STABUSY; +} + +/********************************************************************************* + * Read an off-chip register in a PHY through the MDC/MDIO port * + *********************************************************************************/ +u16 RdPHYReg(u16 PHYAddr, u16 RegAddr) +{ + u16 Data; + + PollMdcDone(); + + *pEMAC_STAADD = SET_PHYAD(PHYAddr) | SET_REGAD(RegAddr) | + STAIE | STABUSY; + + PollMdcDone(); + + Data = (u16) * pEMAC_STADAT; + + PHYregs[RegAddr] = Data; /* save shadow copy */ + + return Data; +} + +void SoftResetPHY(void) +{ + u16 phydat; + /* set the reset bit */ + WrPHYReg(PHYADDR, PHY_MODECTL, PHY_RESET); + /* and clear it again */ + WrPHYReg(PHYADDR, PHY_MODECTL, 0x0000); + do { + /* poll until reset is complete */ + phydat = RdPHYReg(PHYADDR, PHY_MODECTL); + } while ((phydat & PHY_RESET) != 0); +} + +int SetupSystemRegs(int *opmode) +{ + u16 sysctl, phydat; + int count = 0; + /* Enable PHY output */ + *pVR_CTL |= PHYCLKOE; + /* MDC = 2.5 MHz */ + sysctl = SET_MDCDIV(24); + /* Odd word alignment for Receive Frame DMA word */ + /* Configure checksum support and rcve frame word alignment */ + sysctl |= RXDWA | RXCKS; + *pEMAC_SYSCTL = sysctl; + /* auto negotiation on */ + /* full duplex */ + /* 100 Mbps */ + phydat = PHY_ANEG_EN | PHY_DUPLEX | PHY_SPD_SET; + WrPHYReg(PHYADDR, PHY_MODECTL, phydat); + do { + udelay(1000); + phydat = RdPHYReg(PHYADDR, PHY_MODESTAT); + if (count > 3000) { + printf + ("Link is down, please check your network connection\n"); + return -1; + } + count++; + } while (!(phydat & 0x0004)); + + phydat = RdPHYReg(PHYADDR, PHY_ANLPAR); + + if ((phydat & 0x0100) || (phydat & 0x0040)) + *opmode = FDMODE; + else + *opmode = 0; + + *pEMAC_MMC_CTL = RSTC | CROLL; + + /* Initialize the TX DMA channel registers */ + *pDMA2_X_COUNT = 0; + *pDMA2_X_MODIFY = 4; + *pDMA2_Y_COUNT = 0; + *pDMA2_Y_MODIFY = 0; + + /* Initialize the RX DMA channel registers */ + *pDMA1_X_COUNT = 0; + *pDMA1_X_MODIFY = 4; + *pDMA1_Y_COUNT = 0; + *pDMA1_Y_MODIFY = 0; + return 0; +} + +ADI_ETHER_BUFFER *SetupRxBuffer(int no) +{ + ADI_ETHER_FRAME_BUFFER *frmbuf; + ADI_ETHER_BUFFER *buf; + int nobytes_buffer = sizeof(ADI_ETHER_BUFFER[2]) / 2; /* ensure a multi. of 4 */ + int total_size = nobytes_buffer + RECV_BUFSIZE; + + buf = (ADI_ETHER_BUFFER *) (RXBUF_BASE_ADDR + no * total_size); + frmbuf = + (ADI_ETHER_FRAME_BUFFER *) (RXBUF_BASE_ADDR + no * total_size + + nobytes_buffer); + + memset(buf, 0x00, nobytes_buffer); + buf->FrmData = frmbuf; + memset(frmbuf, 0xfe, RECV_BUFSIZE); + + /* set up first desc to point to receive frame buffer */ + buf->Dma[0].NEXT_DESC_PTR = &(buf->Dma[1]); + buf->Dma[0].START_ADDR = (u32) buf->FrmData; + buf->Dma[0].CONFIG.b_DMA_EN = 1; /* enabled */ + buf->Dma[0].CONFIG.b_WNR = 1; /* Write to memory */ + buf->Dma[0].CONFIG.b_WDSIZE = 2; /* wordsize is 32 bits */ + buf->Dma[0].CONFIG.b_NDSIZE = 5; /* 5 half words is desc size. */ + buf->Dma[0].CONFIG.b_FLOW = 7; /* large desc flow */ + + /* set up second desc to point to status word */ + buf->Dma[1].NEXT_DESC_PTR = &(buf->Dma[0]); + buf->Dma[1].START_ADDR = (u32) & buf->IPHdrChksum; + buf->Dma[1].CONFIG.b_DMA_EN = 1; /* enabled */ + buf->Dma[1].CONFIG.b_WNR = 1; /* Write to memory */ + buf->Dma[1].CONFIG.b_WDSIZE = 2; /* wordsize is 32 bits */ + buf->Dma[1].CONFIG.b_DI_EN = 1; /* enable interrupt */ + buf->Dma[1].CONFIG.b_NDSIZE = 5; /* must be 0 when FLOW is 0 */ + buf->Dma[1].CONFIG.b_FLOW = 7; /* stop */ + + return buf; +} + +ADI_ETHER_BUFFER *SetupTxBuffer(int no) +{ + ADI_ETHER_FRAME_BUFFER *frmbuf; + ADI_ETHER_BUFFER *buf; + int nobytes_buffer = sizeof(ADI_ETHER_BUFFER[2]) / 2; /* ensure a multi. of 4 */ + int total_size = nobytes_buffer + RECV_BUFSIZE; + + buf = (ADI_ETHER_BUFFER *) (TXBUF_BASE_ADDR + no * total_size); + frmbuf = + (ADI_ETHER_FRAME_BUFFER *) (TXBUF_BASE_ADDR + no * total_size + + nobytes_buffer); + + memset(buf, 0x00, nobytes_buffer); + buf->FrmData = frmbuf; + memset(frmbuf, 0x00, RECV_BUFSIZE); + + /* set up first desc to point to receive frame buffer */ + buf->Dma[0].NEXT_DESC_PTR = &(buf->Dma[1]); + buf->Dma[0].START_ADDR = (u32) buf->FrmData; + buf->Dma[0].CONFIG.b_DMA_EN = 1; /* enabled */ + buf->Dma[0].CONFIG.b_WNR = 0; /* Read to memory */ + buf->Dma[0].CONFIG.b_WDSIZE = 2; /* wordsize is 32 bits */ + buf->Dma[0].CONFIG.b_NDSIZE = 5; /* 5 half words is desc size. */ + buf->Dma[0].CONFIG.b_FLOW = 7; /* large desc flow */ + + /* set up second desc to point to status word */ + buf->Dma[1].NEXT_DESC_PTR = &(buf->Dma[0]); + buf->Dma[1].START_ADDR = (u32) & buf->StatusWord; + buf->Dma[1].CONFIG.b_DMA_EN = 1; /* enabled */ + buf->Dma[1].CONFIG.b_WNR = 1; /* Write to memory */ + buf->Dma[1].CONFIG.b_WDSIZE = 2; /* wordsize is 32 bits */ + buf->Dma[1].CONFIG.b_DI_EN = 1; /* enable interrupt */ + buf->Dma[1].CONFIG.b_NDSIZE = 0; /* must be 0 when FLOW is 0 */ + buf->Dma[1].CONFIG.b_FLOW = 0; /* stop */ + + return buf; +} + +#if defined(CONFIG_POST) && defined(CFG_POST_ETHER) +int ether_post_test(int flags) +{ + uchar buf[64]; + int i, value = 0; + int length; + + printf("\n--------"); + bfin_EMAC_init(NULL, NULL); + /* construct the package */ + buf[0] = buf[6] = (unsigned char)(*pEMAC_ADDRLO & 0xFF); + buf[1] = buf[7] = (unsigned char)((*pEMAC_ADDRLO & 0xFF00) >> 8); + buf[2] = buf[8] = (unsigned char)((*pEMAC_ADDRLO & 0xFF0000) >> 16); + buf[3] = buf[9] = (unsigned char)((*pEMAC_ADDRLO & 0xFF000000) >> 24); + buf[4] = buf[10] = (unsigned char)(*pEMAC_ADDRHI & 0xFF); + buf[5] = buf[11] = (unsigned char)((*pEMAC_ADDRHI & 0xFF00) >> 8); + buf[12] = 0x08; /* Type: ARP */ + buf[13] = 0x06; + buf[14] = 0x00; /* Hardware type: Ethernet */ + buf[15] = 0x01; + buf[16] = 0x08; /* Protocal type: IP */ + buf[17] = 0x00; + buf[18] = 0x06; /* Hardware size */ + buf[19] = 0x04; /* Protocol size */ + buf[20] = 0x00; /* Opcode: request */ + buf[21] = 0x01; + + for (i = 0; i < 42; i++) + buf[i + 22] = i; + printf("--------Send 64 bytes......\n"); + bfin_EMAC_send(NULL, (volatile void *)buf, 64); + for (i = 0; i < 100; i++) { + udelay(10000); + if ((rxbuf[rxIdx]->StatusWord & RX_COMP) != 0) { + value = 1; + break; + } + } + if (value == 0) { + printf("--------EMAC can't receive any data\n"); + eth_halt(); + return -1; + } + length = rxbuf[rxIdx]->StatusWord & 0x000007FF - 4; + for (i = 0; i < length; i++) { + if (rxbuf[rxIdx]->FrmData->Dest[i] != buf[i]) { + printf("--------EMAC receive error data!\n"); + eth_halt(); + return -1; + } + } + printf("--------receive %d bytes, matched\n", length); + bfin_EMAC_halt(NULL); + return 0; +} +#endif +#endif /* CFG_CMD_NET */ diff --git a/board/bf537-stamp/ether_bf537.h b/board/bf537-stamp/ether_bf537.h new file mode 100644 index 0000000..64240ba --- /dev/null +++ b/board/bf537-stamp/ether_bf537.h @@ -0,0 +1,110 @@ +#define PHYADDR 0x01 +#define NO_PHY_REGS 0x20 + +#define DEFAULT_PHY_PHYID1 0x0007 +#define DEFAULT_PHY_PHYID2 0xC0A3 +#define PHY_MODECTL 0x00 +#define PHY_MODESTAT 0x01 +#define PHY_PHYID1 0x02 +#define PHY_PHYID2 0x03 +#define PHY_ANAR 0x04 +#define PHY_ANLPAR 0x05 +#define PHY_ANER 0x06 + +#define PHY_RESET 0x8000 +#define PHY_ANEG_EN 0x1000 +#define PHY_DUPLEX 0x0100 +#define PHY_SPD_SET 0x2000 + +#define RECV_BUFSIZE (0x614) + +typedef volatile u32 reg32; +typedef volatile u16 reg16; + +typedef struct ADI_DMA_CONFIG_REG { + u16 b_DMA_EN:1; /* 0 Enabled */ + u16 b_WNR:1; /* 1 Direction */ + u16 b_WDSIZE:2; /* 2:3 Transfer word size */ + u16 b_DMA2D:1; /* 4 DMA mode */ + u16 b_RESTART:1; /* 5 Retain FIFO */ + u16 b_DI_SEL:1; /* 6 Data interrupt timing select */ + u16 b_DI_EN:1; /* 7 Data interrupt enabled */ + u16 b_NDSIZE:4; /* 8:11 Flex descriptor size */ + u16 b_FLOW:3; /* 12:14Flow */ +} ADI_DMA_CONFIG_REG; + +typedef struct adi_ether_frame_buffer { + u16 NoBytes; /* the no. of following bytes */ + u8 Dest[6]; /* destination MAC address */ + u8 Srce[6]; /* source MAC address */ + u16 LTfield; /* length/type field */ + u8 Data[0]; /* payload bytes */ +} ADI_ETHER_FRAME_BUFFER; +/* 16 bytes/struct */ + +typedef struct dma_descriptor { + struct dma_descriptor *NEXT_DESC_PTR; + u32 START_ADDR; + ADI_DMA_CONFIG_REG CONFIG; +} DMA_DESCRIPTOR; +/* 10 bytes/struct in 12 bytes */ + +typedef struct adi_ether_buffer { + DMA_DESCRIPTOR Dma[2]; /* first for the frame, second for the status */ + ADI_ETHER_FRAME_BUFFER *FrmData;/* pointer to data */ + struct adi_ether_buffer *pNext; /* next buffer */ + struct adi_ether_buffer *pPrev; /* prev buffer */ + u16 IPHdrChksum; /* the IP header checksum */ + u16 IPPayloadChksum; /* the IP header and payload checksum */ + volatile u32 StatusWord; /* the frame status word */ +} ADI_ETHER_BUFFER; +/* 40 bytes/struct in 44 bytes */ + +void SetupMacAddr(u8 * MACaddr); + +void PollMdcDone(void); +void WrPHYReg(u16 PHYAddr, u16 RegAddr, u16 Data); +u16 RdPHYReg(u16 PHYAddr, u16 RegAddr); +void SoftResetPHY(void); +void DumpPHYRegs(void); + +int SetupSystemRegs(int *opmode); + +/** + * is_zero_ether_addr - Determine if give Ethernet address is all zeros. + * @addr: Pointer to a six-byte array containing the Ethernet address + * + * Return true if the address is all zeroes. + */ +static inline int is_zero_ether_addr(const u8 * addr) +{ + return !(addr[0] | addr[1] | addr[2] | addr[3] | addr[4] | addr[5]); +} + +/** + * is_multicast_ether_addr - Determine if the Ethernet address is a multicast. + * @addr: Pointer to a six-byte array containing the Ethernet address + * + * Return true if the address is a multicast address. + * By definition the broadcast address is also a multicast address. + */ +static inline int is_multicast_ether_addr(const u8 * addr) +{ + return (0x01 & addr[0]); +} + +/** + * is_valid_ether_addr - Determine if the given Ethernet address is valid + * @addr: Pointer to a six-byte array containing the Ethernet address + * + * Check that the Ethernet address (MAC) is not 00:00:00:00:00:00, is not + * a multicast address, and is not FF:FF:FF:FF:FF:FF. + * + * Return true if the address is valid. + */ +static inline int is_valid_ether_addr(const u8 * addr) +{ + /* FF:FF:FF:FF:FF:FF is a multicast address so we don't need to + * explicitly check for it here. */ + return !is_multicast_ether_addr(addr) && !is_zero_ether_addr(addr); +} diff --git a/board/bf537-stamp/flash-defines.h b/board/bf537-stamp/flash-defines.h new file mode 100644 index 0000000..f19e171 --- /dev/null +++ b/board/bf537-stamp/flash-defines.h @@ -0,0 +1,123 @@ +/* + * U-boot - flash-defines.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __FLASHDEFINES_H__ +#define __FLASHDEFINES_H__ + +#include <common.h> + +#define V_ULONG(a) (*(volatile unsigned long *)( a )) +#define V_BYTE(a) (*(volatile unsigned char *)( a )) +#define TRUE 0x1 +#define FALSE 0x0 +#define BUFFER_SIZE 0x80000 +#define NO_COMMAND 0 +#define GET_CODES 1 +#define RESET 2 +#define WRITE 3 +#define FILL 4 +#define ERASE_ALL 5 +#define ERASE_SECT 6 +#define READ 7 +#define GET_SECTNUM 8 +#define FLASH_START_L 0x0000 +#define FLASH_START_H 0x2000 +#define FLASH_MAN_ST 2 +#define RESET_VAL 0xF0 + +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; + +int get_codes(void); +int poll_toggle_bit(long lOffset); +void reset_flash(void); +int erase_flash(void); +int erase_block_flash(int); +void unlock_flash(long lOffset); +int write_data(long lStart, long lCount, uchar * pnData); +int read_flash(long nOffset, int *pnValue); +int write_flash(long nOffset, int nValue); +void get_sector_number(long lOffset, int *pnSector); +int GetSectorProtectionStatus(flash_info_t * info, int nSector); +int GetOffset(int nBlock); +int AFP_NumSectors = 71; +long AFP_SectorSize2 = 0x10000; +int AFP_SectorSize1 = 0x2000; + +#define NUM_SECTORS 71 + +#define WRITESEQ1 0x0AAA +#define WRITESEQ2 0x0554 +#define WRITESEQ3 0x0AAA +#define WRITESEQ4 0x0AAA +#define WRITESEQ5 0x0554 +#define WRITESEQ6 0x0AAA +#define WRITEDATA1 0xaa +#define WRITEDATA2 0x55 +#define WRITEDATA3 0x80 +#define WRITEDATA4 0xaa +#define WRITEDATA5 0x55 +#define WRITEDATA6 0x10 +#define PriFlashABegin 0 +#define SecFlashABegin 8 +#define SecFlashBBegin 36 +#define PriFlashAOff 0x0 +#define PriFlashBOff 0x100000 +#define SecFlashAOff 0x10000 +#define SecFlashBOff 0x280000 +#define INVALIDLOCNSTART 0x20270000 +#define INVALIDLOCNEND 0x20280000 +#define BlockEraseVal 0x30 +#define UNLOCKDATA1 0xaa +#define UNLOCKDATA2 0x55 +#define UNLOCKDATA3 0xa0 +#define GETCODEDATA1 0xaa +#define GETCODEDATA2 0x55 +#define GETCODEDATA3 0x90 +#define SecFlashASec1Off 0x200000 +#define SecFlashASec2Off 0x204000 +#define SecFlashASec3Off 0x206000 +#define SecFlashASec4Off 0x208000 +#define SecFlashAEndOff 0x210000 +#define SecFlashBSec1Off 0x280000 +#define SecFlashBSec2Off 0x284000 +#define SecFlashBSec3Off 0x286000 +#define SecFlashBSec4Off 0x288000 +#define SecFlashBEndOff 0x290000 + +#define SECT32 32 +#define SECT33 33 +#define SECT34 34 +#define SECT35 35 +#define SECT36 36 +#define SECT37 37 +#define SECT38 38 +#define SECT39 39 + +#define FLASH_SUCCESS 0 +#define FLASH_FAIL -1 + +#endif diff --git a/board/bf537-stamp/flash.c b/board/bf537-stamp/flash.c new file mode 100644 index 0000000..42dcf06 --- /dev/null +++ b/board/bf537-stamp/flash.c @@ -0,0 +1,403 @@ +/* + * U-boot - flash.c Flash driver for PSD4256GV + * + * Copyright (c) 2005 blackfin.uclinux.org + * This file is based on BF533EzFlash.c originally written by Analog Devices, Inc. + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <malloc.h> +#include <config.h> +#include <asm/io.h> +#include "flash-defines.h" + +void flash_reset(void) +{ + reset_flash(); +} + +unsigned long flash_get_size(ulong baseaddr, flash_info_t * info, int bank_flag) +{ + int id = 0, i = 0; + static int FlagDev = 1; + + id = get_codes(); + if (FlagDev) { + FlagDev = 0; + } + info->flash_id = id; + switch (bank_flag) { + case 0: + for (i = PriFlashABegin; i < SecFlashABegin; i++) + info->start[i] = (baseaddr + (i * AFP_SectorSize1)); + for (i = SecFlashABegin; i < NUM_SECTORS; i++) + info->start[i] = + (baseaddr + SecFlashAOff + + ((i - SecFlashABegin) * AFP_SectorSize2)); + info->size = 0x400000; + info->sector_count = NUM_SECTORS; + break; + case 1: + info->start[0] = baseaddr + SecFlashASec1Off; + info->start[1] = baseaddr + SecFlashASec2Off; + info->start[2] = baseaddr + SecFlashASec3Off; + info->start[3] = baseaddr + SecFlashASec4Off; + info->size = 0x10000; + info->sector_count = 4; + break; + case 2: + info->start[0] = baseaddr + SecFlashBSec1Off; + info->start[1] = baseaddr + SecFlashBSec2Off; + info->start[2] = baseaddr + SecFlashBSec3Off; + info->start[3] = baseaddr + SecFlashBSec4Off; + info->size = 0x10000; + info->sector_count = 4; + break; + } + return (info->size); +} + +unsigned long flash_init(void) +{ + unsigned long size_b; + int i; + + size_b = 0; + for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) { + flash_info[i].flash_id = FLASH_UNKNOWN; + } + + size_b = flash_get_size(CFG_FLASH_BASE, &flash_info[0], 0); + + if (flash_info[0].flash_id == FLASH_UNKNOWN || size_b == 0) { + printf("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", + size_b, size_b >> 20); + } + + /* flash_protect (int flag, ulong from, ulong to, flash_info_t *info) */ + (void)flash_protect(FLAG_PROTECT_SET, CFG_FLASH_BASE, + (flash_info[0].start[2] - 1), &flash_info[0]); +#if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT) + (void)flash_protect(FLAG_PROTECT_SET, 0x203F0000, 0x203FFFFF, + &flash_info[0]); +#endif + + return (size_b); +} + +void flash_print_info(flash_info_t * info) +{ + int i; + + if (info->flash_id == FLASH_UNKNOWN) { + printf("missing or unknown FLASH type\n"); + return; + } + + switch (info->flash_id) { + case (STM_ID_29W320EB & 0xFFFF): + case (STM_ID_29W320DB & 0xFFFF): + printf("ST Microelectronics "); + break; + default: + printf("Unknown Vendor: (0x%08X) ", info->flash_id); + break; + } + for (i = 0; i < info->sector_count; ++i) { + if ((i % 5) == 0) + printf("\n "); + printf(" %08lX%s", + info->start[i], info->protect[i] ? " (RO)" : " "); + } + printf("\n"); + return; +} + +int flash_erase(flash_info_t * info, int s_first, int s_last) +{ + int cnt = 0, i; + int prot, sect; + + prot = 0; + for (sect = s_first; sect <= s_last; ++sect) { + if (info->protect[sect]) + prot++; + } + if (prot) + printf("- Warning: %d protected sectors will not be erased!\n", + prot); + else + printf("\n"); + + cnt = s_last - s_first + 1; + +#if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT) + printf("Erasing Flash locations, Please Wait\n"); + for (i = s_first; i <= s_last; i++) { + if (info->protect[i] == 0) { /* not protected */ + if (erase_block_flash(i) < 0) { + printf("Error Sector erasing \n"); + return FLASH_FAIL; + } + } + } +#elif (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT) + if (cnt == FLASH_TOT_SECT) { + printf("Erasing flash, Please Wait \n"); + if (erase_flash() < 0) { + printf("Erasing flash failed \n"); + return FLASH_FAIL; + } + } else { + printf("Erasing Flash locations, Please Wait\n"); + for (i = s_first; i <= s_last; i++) { + if (info->protect[i] == 0) { /* not protected */ + if (erase_block_flash(i) < 0) { + printf("Error Sector erasing \n"); + return FLASH_FAIL; + } + } + } + } +#endif + printf("\n"); + return FLASH_SUCCESS; +} + +int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) +{ + int d; + if (addr % 2) { + read_flash(addr - 1 - CFG_FLASH_BASE, &d); + d = (int)((d & 0x00FF) | (*src++ << 8)); + write_data(addr - 1, 2, (uchar *) & d); + write_data(addr + 1, cnt - 1, src); + } else + write_data(addr, cnt, src); + return FLASH_SUCCESS; +} + +int write_data(long lStart, long lCount, uchar * pnData) +{ + long i = 0; + unsigned long ulOffset = lStart - CFG_FLASH_BASE; + int d; + int nSector = 0; + int flag = 0; + + if (lCount % 2) { + flag = 1; + lCount = lCount - 1; + } + + for (i = 0; i < lCount - 1; i += 2, ulOffset += 2) { + get_sector_number(ulOffset, &nSector); + read_flash(ulOffset, &d); + if (d != 0xffff) { + printf + ("Flash not erased at offset 0x%x Please erase to reprogram \n", + ulOffset); + return FLASH_FAIL; + } + unlock_flash(ulOffset); + d = (int)(pnData[i] | pnData[i + 1] << 8); + write_flash(ulOffset, d); + if (poll_toggle_bit(ulOffset) < 0) { + printf("Error programming the flash \n"); + return FLASH_FAIL; + } + if ((i > 0) && (!(i % AFP_SectorSize2))) + printf("."); + } + if (flag) { + get_sector_number(ulOffset, &nSector); + read_flash(ulOffset, &d); + if (d != 0xffff) { + printf + ("Flash not erased at offset 0x%x Please erase to reprogram \n", + ulOffset); + return FLASH_FAIL; + } + unlock_flash(ulOffset); + d = (int)(pnData[i] | (d & 0xFF00)); + write_flash(ulOffset, d); + if (poll_toggle_bit(ulOffset) < 0) { + printf("Error programming the flash \n"); + return FLASH_FAIL; + } + } + return FLASH_SUCCESS; +} + +int write_flash(long nOffset, int nValue) +{ + long addr; + + addr = (CFG_FLASH_BASE + nOffset); + *(unsigned volatile short *)addr = nValue; + sync(); +#if (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT) + if (icache_status()) + udelay(CONFIG_CCLK_HZ / 1000000); +#endif + return FLASH_SUCCESS; +} + +int read_flash(long nOffset, int *pnValue) +{ + unsigned short *pFlashAddr = + (unsigned short *)(CFG_FLASH_BASE + nOffset); + + *pnValue = *pFlashAddr; + + return TRUE; +} + +int poll_toggle_bit(long lOffset) +{ + unsigned int u1, u2; + volatile unsigned long *FB = + (volatile unsigned long *)(CFG_FLASH_BASE + lOffset); + while (1) { + u1 = *(volatile unsigned short *)FB; + u2 = *(volatile unsigned short *)FB; + u1 ^= u2; + if (!(u1 & 0x0040)) + break; + if (!(u2 & 0x0020)) + continue; + else { + u1 = *(volatile unsigned short *)FB; + u2 = *(volatile unsigned short *)FB; + u1 ^= u2; + if (!(u1 & 0x0040)) + break; + else { + reset_flash(); + return FLASH_FAIL; + } + } + } + return FLASH_SUCCESS; +} + +void reset_flash(void) +{ + write_flash(WRITESEQ1, RESET_VAL); + /* Wait for 10 micro seconds */ + udelay(10); +} + +int erase_flash(void) +{ + write_flash(WRITESEQ1, WRITEDATA1); + write_flash(WRITESEQ2, WRITEDATA2); + write_flash(WRITESEQ3, WRITEDATA3); + write_flash(WRITESEQ4, WRITEDATA4); + write_flash(WRITESEQ5, WRITEDATA5); + write_flash(WRITESEQ6, WRITEDATA6); + + if (poll_toggle_bit(0x0000) < 0) + return FLASH_FAIL; + + return FLASH_SUCCESS; +} + +int erase_block_flash(int nBlock) +{ + long ulSectorOff = 0x0; + + if ((nBlock < 0) || (nBlock > AFP_NumSectors)) + return FALSE; + + /* figure out the offset of the block in flash */ + if ((nBlock >= 0) && (nBlock < SecFlashABegin)) + ulSectorOff = nBlock * AFP_SectorSize1; + + else if ((nBlock >= SecFlashABegin) && (nBlock < NUM_SECTORS)) + ulSectorOff = + SecFlashAOff + (nBlock - SecFlashABegin) * AFP_SectorSize2; + /* no such sector */ + else + return FLASH_FAIL; + + write_flash((WRITESEQ1 | ulSectorOff), WRITEDATA1); + write_flash((WRITESEQ2 | ulSectorOff), WRITEDATA2); + write_flash((WRITESEQ3 | ulSectorOff), WRITEDATA3); + write_flash((WRITESEQ4 | ulSectorOff), WRITEDATA4); + write_flash((WRITESEQ5 | ulSectorOff), WRITEDATA5); + + write_flash(ulSectorOff, BlockEraseVal); + + if (poll_toggle_bit(ulSectorOff) < 0) + return FLASH_FAIL; + printf("."); + + return FLASH_SUCCESS; +} + +void unlock_flash(long ulOffset) +{ + unsigned long ulOffsetAddr = ulOffset; + ulOffsetAddr &= 0xFFFF0000; + + write_flash((WRITESEQ1 | ulOffsetAddr), UNLOCKDATA1); + write_flash((WRITESEQ2 | ulOffsetAddr), UNLOCKDATA2); + write_flash((WRITESEQ3 | ulOffsetAddr), UNLOCKDATA3); +} + +int get_codes() +{ + int dev_id = 0; + + write_flash(WRITESEQ1, GETCODEDATA1); + write_flash(WRITESEQ2, GETCODEDATA2); + write_flash(WRITESEQ3, GETCODEDATA3); + + read_flash(0x0402, &dev_id); + dev_id &= 0x0000FFFF; + + reset_flash(); + + return dev_id; +} + +void get_sector_number(long ulOffset, int *pnSector) +{ + int nSector = 0; + long lMainEnd = 0x400000; + long lBootEnd = 0x10000; + + /* sector numbers for the FLASH A boot sectors */ + if (ulOffset < lBootEnd) { + nSector = (int)ulOffset / AFP_SectorSize1; + } + /* sector numbers for the FLASH B boot sectors */ + else if ((ulOffset >= lBootEnd) && (ulOffset < lMainEnd)) { + nSector = ((ulOffset / (AFP_SectorSize2)) + 7); + } + /* if it is a valid sector, set it */ + if ((nSector >= 0) && (nSector < AFP_NumSectors)) + *pnSector = nSector; + +} diff --git a/board/bf537-stamp/nand.c b/board/bf537-stamp/nand.c new file mode 100644 index 0000000..4d6e776 --- /dev/null +++ b/board/bf537-stamp/nand.c @@ -0,0 +1,106 @@ +/* + * (C) Copyright 2006 Aubrey.Li, aubrey.li@analog.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> + +#if (CONFIG_COMMANDS & CFG_CMD_NAND) + +#include <nand.h> + +#define CONCAT(a,b,c,d) a ## b ## c ## d +#define PORT(a,b) CONCAT(pPORT,a,b,) + +#ifndef CONFIG_NAND_GPIO_PORT +#define CONFIG_NAND_GPIO_PORT F +#endif + +/* + * hardware specific access to control-lines + */ +static void bfin_hwcontrol(struct mtd_info *mtd, int cmd) +{ + register struct nand_chip *this = mtd->priv; + + switch (cmd) { + + case NAND_CTL_SETCLE: + this->IO_ADDR_W = CFG_NAND_BASE + BFIN_NAND_CLE; + break; + case NAND_CTL_CLRCLE: + this->IO_ADDR_W = CFG_NAND_BASE; + break; + + case NAND_CTL_SETALE: + this->IO_ADDR_W = CFG_NAND_BASE + BFIN_NAND_ALE; + break; + case NAND_CTL_CLRALE: + this->IO_ADDR_W = CFG_NAND_BASE; + break; + case NAND_CTL_SETNCE: + case NAND_CTL_CLRNCE: + break; + } + + this->IO_ADDR_R = this->IO_ADDR_W; + + /* Drain the writebuffer */ + sync(); +} + +int bfin_device_ready(struct mtd_info *mtd) +{ + int ret = (*PORT(CONFIG_NAND_GPIO_PORT, IO) & BFIN_NAND_READY) ? 1 : 0; + sync(); + return ret; +} + +/* + * Board-specific NAND initialization. The following members of the + * argument are board-specific (per include/linux/mtd/nand.h): + * - IO_ADDR_R?: address to read the 8 I/O lines of the flash device + * - IO_ADDR_W?: address to write the 8 I/O lines of the flash device + * - hwcontrol: hardwarespecific function for accesing control-lines + * - dev_ready: hardwarespecific function for accesing device ready/busy line + * - enable_hwecc?: function to enable (reset) hardware ecc generator. Must + * only be provided if a hardware ECC is available + * - eccmode: mode of ecc, see defines + * - chip_delay: chip dependent delay for transfering data from array to + * read regs (tR) + * - options: various chip options. They can partly be set to inform + * nand_scan about special functionality. See the defines for further + * explanation + * Members with a "?" were not set in the merged testing-NAND branch, + * so they are not set here either. + */ +void board_nand_init(struct nand_chip *nand) +{ + *PORT(CONFIG_NAND_GPIO_PORT, _FER) &= ~BFIN_NAND_READY; + *PORT(CONFIG_NAND_GPIO_PORT, IO_DIR) &= ~BFIN_NAND_READY; + *PORT(CONFIG_NAND_GPIO_PORT, IO_INEN) |= BFIN_NAND_READY; + + nand->hwcontrol = bfin_hwcontrol; + nand->eccmode = NAND_ECC_SOFT; + nand->dev_ready = bfin_device_ready; + nand->chip_delay = 30; +} +#endif /* (CONFIG_COMMANDS & CFG_CMD_NAND) */ diff --git a/board/bf537-stamp/post-memory.c b/board/bf537-stamp/post-memory.c new file mode 100644 index 0000000..6039350 --- /dev/null +++ b/board/bf537-stamp/post-memory.c @@ -0,0 +1,322 @@ +#include <common.h> +#include <asm/io.h> + +#ifdef CONFIG_POST + +#include <post.h> +#include <watchdog.h> + +#if CONFIG_POST & CFG_POST_MEMORY +#define CLKIN 25000000 +#define PATTERN1 0x5A5A5A5A +#define PATTERN2 0xAAAAAAAA + +#define CCLK_NUM 4 +#define SCLK_NUM 3 + +void post_out_buff(char *buff); +int post_key_pressed(void); +void post_init_pll(int mult, int div); +int post_init_sdram(int sclk); +void post_init_uart(int sclk); + +const int pll[CCLK_NUM][SCLK_NUM][2] = { + {{20, 4}, {20, 5}, {20, 10}}, /* CCLK = 500M */ + {{16, 4}, {16, 5}, {16, 8}}, /* CCLK = 400M */ + {{8, 2}, {8, 4}, {8, 5}}, /* CCLK = 200M */ + {{4, 1}, {4, 2}, {4, 4}} /* CCLK = 100M */ +}; +const char *const log[CCLK_NUM][SCLK_NUM] = { + {"CCLK-500Mhz SCLK-125Mhz: Writing...\0", + "CCLK-500Mhz SCLK-100Mhz: Writing...\0", + "CCLK-500Mhz SCLK- 50Mhz: Writing...\0",}, + {"CCLK-400Mhz SCLK-100Mhz: Writing...\0", + "CCLK-400Mhz SCLK- 80Mhz: Writing...\0", + "CCLK-400Mhz SCLK- 50Mhz: Writing...\0",}, + {"CCLK-200Mhz SCLK-100Mhz: Writing...\0", + "CCLK-200Mhz SCLK- 50Mhz: Writing...\0", + "CCLK-200Mhz SCLK- 40Mhz: Writing...\0",}, + {"CCLK-100Mhz SCLK-100Mhz: Writing...\0", + "CCLK-100Mhz SCLK- 50Mhz: Writing...\0", + "CCLK-100Mhz SCLK- 25Mhz: Writing...\0",}, +}; + +int memory_post_test(int flags) +{ + int addr; + int m, n; + int sclk, sclk_temp; + int ret = 1; + + sclk_temp = CLKIN / 1000000; + sclk_temp = sclk_temp * CONFIG_VCO_MULT; + for (sclk = 0; sclk_temp > 0; sclk++) + sclk_temp -= CONFIG_SCLK_DIV; + sclk = sclk * 1000000; + post_init_uart(sclk); + if (post_key_pressed() == 0) + return 0; + + for (m = 0; m < CCLK_NUM; m++) { + for (n = 0; n < SCLK_NUM; n++) { + /* Calculate the sclk */ + sclk_temp = CLKIN / 1000000; + sclk_temp = sclk_temp * pll[m][n][0]; + for (sclk = 0; sclk_temp > 0; sclk++) + sclk_temp -= pll[m][n][1]; + sclk = sclk * 1000000; + + post_init_pll(pll[m][n][0], pll[m][n][1]); + post_init_sdram(sclk); + post_init_uart(sclk); + post_out_buff("\n\r\0"); + post_out_buff(log[m][n]); + for (addr = 0x0; addr < CFG_MAX_RAM_SIZE; addr += 4) + *(unsigned long *)addr = PATTERN1; + post_out_buff("Reading...\0"); + for (addr = 0x0; addr < CFG_MAX_RAM_SIZE; addr += 4) { + if ((*(unsigned long *)addr) != PATTERN1) { + post_out_buff("Error\n\r\0"); + ret = 0; + } + } + post_out_buff("OK\n\r\0"); + } + } + if (ret) + post_out_buff("memory POST passed\n\r\0"); + else + post_out_buff("memory POST failed\n\r\0"); + + post_out_buff("\n\r\n\r\0"); + return 1; +} + +void post_init_uart(int sclk) +{ + int divisor; + + for (divisor = 0; sclk > 0; divisor++) + sclk -= 57600 * 16; + + *pPORTF_FER = 0x000F; + *pPORTH_FER = 0xFFFF; + + *pUART_GCTL = 0x00; + *pUART_LCR = 0x83; + sync(); + *pUART_DLL = (divisor & 0xFF); + sync(); + *pUART_DLH = ((divisor >> 8) & 0xFF); + sync(); + *pUART_LCR = 0x03; + sync(); + *pUART_GCTL = 0x01; + sync(); +} + +void post_out_buff(char *buff) +{ + + int i = 0; + for (i = 0; i < 0x80000; i++) ; + i = 0; + while ((buff[i] != '\0') && (i != 100)) { + while (!(*pUART_LSR & 0x20)) ; + *pUART_THR = buff[i]; + sync(); + i++; + } + for (i = 0; i < 0x80000; i++) ; +} + +/* Using sw10-PF5 as the hotkey */ +#define KEY_LOOP 0x80000 +#define KEY_DELAY 0x80 +int post_key_pressed(void) +{ + int i, n; + unsigned short value; + + *pPORTF_FER &= ~PF5; + *pPORTFIO_DIR &= ~PF5; + *pPORTFIO_INEN |= PF5; + sync(); + + post_out_buff("########Press SW10 to enter Memory POST########: 3\0"); + for (i = 0; i < KEY_LOOP; i++) { + value = *pPORTFIO & PF5; + if (*pUART0_RBR == 0x0D) { + value = 0; + goto key_pressed; + } + if (value != 0) { + goto key_pressed; + } + for (n = 0; n < KEY_DELAY; n++) + asm("nop"); + } + post_out_buff("\b2\0"); + + for (i = 0; i < KEY_LOOP; i++) { + value = *pPORTFIO & PF5; + if (*pUART0_RBR == 0x0D) { + value = 0; + goto key_pressed; + } + if (value != 0) { + goto key_pressed; + } + for (n = 0; n < KEY_DELAY; n++) + asm("nop"); + } + post_out_buff("\b1\0"); + + for (i = 0; i < KEY_LOOP; i++) { + value = *pPORTFIO & PF5; + if (*pUART0_RBR == 0x0D) { + value = 0; + goto key_pressed; + } + if (value != 0) { + goto key_pressed; + } + for (n = 0; n < KEY_DELAY; n++) + asm("nop"); + } + key_pressed: + post_out_buff("\b0"); + post_out_buff("\n\r\0"); + if (value == 0) + return 0; + post_out_buff("Hotkey has been pressed, Enter POST . . . . . .\n\r\0"); + return 1; +} + +void post_init_pll(int mult, int div) +{ + + *pSIC_IWR = 0x01; + *pPLL_CTL = (mult << 9); + *pPLL_DIV = div; + asm("CLI R2;"); + asm("IDLE;"); + asm("STI R2;"); + while (!(*pPLL_STAT & 0x20)) ; +} + +int post_init_sdram(int sclk) +{ + int SDRAM_tRP, SDRAM_tRP_num, SDRAM_tRAS, SDRAM_tRAS_num, SDRAM_tRCD, + SDRAM_tWR; + int SDRAM_Tref, SDRAM_NRA, SDRAM_CL, SDRAM_SIZE, SDRAM_WIDTH, + mem_SDGCTL, mem_SDBCTL, mem_SDRRC; + + if ((sclk > 119402985)) { + SDRAM_tRP = TRP_2; + SDRAM_tRP_num = 2; + SDRAM_tRAS = TRAS_7; + SDRAM_tRAS_num = 7; + SDRAM_tRCD = TRCD_2; + SDRAM_tWR = TWR_2; + } else if ((sclk > 104477612) && (sclk <= 119402985)) { + SDRAM_tRP = TRP_2; + SDRAM_tRP_num = 2; + SDRAM_tRAS = TRAS_6; + SDRAM_tRAS_num = 6; + SDRAM_tRCD = TRCD_2; + SDRAM_tWR = TWR_2; + } else if ((sclk > 89552239) && (sclk <= 104477612)) { + SDRAM_tRP = TRP_2; + SDRAM_tRP_num = 2; + SDRAM_tRAS = TRAS_5; + SDRAM_tRAS_num = 5; + SDRAM_tRCD = TRCD_2; + SDRAM_tWR = TWR_2; + } else if ((sclk > 74626866) && (sclk <= 89552239)) { + SDRAM_tRP = TRP_2; + SDRAM_tRP_num = 2; + SDRAM_tRAS = TRAS_4; + SDRAM_tRAS_num = 4; + SDRAM_tRCD = TRCD_2; + SDRAM_tWR = TWR_2; + } else if ((sclk > 66666667) && (sclk <= 74626866)) { + SDRAM_tRP = TRP_2; + SDRAM_tRP_num = 2; + SDRAM_tRAS = TRAS_3; + SDRAM_tRAS_num = 3; + SDRAM_tRCD = TRCD_2; + SDRAM_tWR = TWR_2; + } else if ((sclk > 59701493) && (sclk <= 66666667)) { + SDRAM_tRP = TRP_1; + SDRAM_tRP_num = 1; + SDRAM_tRAS = TRAS_4; + SDRAM_tRAS_num = 4; + SDRAM_tRCD = TRCD_1; + SDRAM_tWR = TWR_2; + } else if ((sclk > 44776119) && (sclk <= 59701493)) { + SDRAM_tRP = TRP_1; + SDRAM_tRP_num = 1; + SDRAM_tRAS = TRAS_3; + SDRAM_tRAS_num = 3; + SDRAM_tRCD = TRCD_1; + SDRAM_tWR = TWR_2; + } else if ((sclk > 29850746) && (sclk <= 44776119)) { + SDRAM_tRP = TRP_1; + SDRAM_tRP_num = 1; + SDRAM_tRAS = TRAS_2; + SDRAM_tRAS_num = 2; + SDRAM_tRCD = TRCD_1; + SDRAM_tWR = TWR_2; + } else if (sclk <= 29850746) { + SDRAM_tRP = TRP_1; + SDRAM_tRP_num = 1; + SDRAM_tRAS = TRAS_1; + SDRAM_tRAS_num = 1; + SDRAM_tRCD = TRCD_1; + SDRAM_tWR = TWR_2; + } else { + SDRAM_tRP = TRP_1; + SDRAM_tRP_num = 1; + SDRAM_tRAS = TRAS_1; + SDRAM_tRAS_num = 1; + SDRAM_tRCD = TRCD_1; + SDRAM_tWR = TWR_2; + } + /*SDRAM INFORMATION: */ + SDRAM_Tref = 64; /* Refresh period in milliseconds */ + SDRAM_NRA = 4096; /* Number of row addresses in SDRAM */ + SDRAM_CL = CL_3; /* 2 */ + + SDRAM_SIZE = EBSZ_64; + SDRAM_WIDTH = EBCAW_10; + + mem_SDBCTL = SDRAM_WIDTH | SDRAM_SIZE | EBE; + + /* Equation from section 17 (p17-46) of BF533 HRM */ + mem_SDRRC = + (((CONFIG_SCLK_HZ / 1000) * SDRAM_Tref) / SDRAM_NRA) - + (SDRAM_tRAS_num + SDRAM_tRP_num); + + /* Enable SCLK Out */ + mem_SDGCTL = + (SCTLE | SDRAM_CL | SDRAM_tRAS | SDRAM_tRP | SDRAM_tRCD | SDRAM_tWR + | PSS); + + sync(); + + *pEBIU_SDGCTL |= 0x1000000; + /* Set the SDRAM Refresh Rate control register based on SSCLK value */ + *pEBIU_SDRRC = mem_SDRRC; + + /* SDRAM Memory Bank Control Register */ + *pEBIU_SDBCTL = mem_SDBCTL; + + /* SDRAM Memory Global Control Register */ + *pEBIU_SDGCTL = mem_SDGCTL; + sync(); + return mem_SDRRC; +} + +#endif /* CONFIG_POST & CFG_POST_MEMORY */ +#endif /* CONFIG_POST */ diff --git a/board/bf537-stamp/stm_m25p64.c b/board/bf537-stamp/stm_m25p64.c new file mode 100644 index 0000000..7077e85 --- /dev/null +++ b/board/bf537-stamp/stm_m25p64.c @@ -0,0 +1,515 @@ +/**************************************************************************** + * SPI flash driver for M25P64 + ****************************************************************************/ +#include <common.h> +#include <linux/ctype.h> +#include <asm/io.h> + +#if defined(CONFIG_SPI) + +/* Application definitions */ + +#define NUM_SECTORS 128 /* number of sectors */ +#define SECTOR_SIZE 0x10000 +#define NOP_NUM 1000 + +#define COMMON_SPI_SETTINGS (SPE|MSTR|CPHA|CPOL) /* Settings to the SPI_CTL */ +#define TIMOD01 (0x01) /* stes the SPI to work with core instructions */ + +/* Flash commands */ +#define SPI_WREN (0x06) /*Set Write Enable Latch */ +#define SPI_WRDI (0x04) /*Reset Write Enable Latch */ +#define SPI_RDSR (0x05) /*Read Status Register */ +#define SPI_WRSR (0x01) /*Write Status Register */ +#define SPI_READ (0x03) /*Read data from memory */ +#define SPI_FAST_READ (0x0B) /*Read data from memory */ +#define SPI_PP (0x02) /*Program Data into memory */ +#define SPI_SE (0xD8) /*Erase one sector in memory */ +#define SPI_BE (0xC7) /*Erase all memory */ +#define WIP (0x1) /*Check the write in progress bit of the SPI status register */ +#define WEL (0x2) /*Check the write enable bit of the SPI status register */ + +#define TIMEOUT 350000000 + +typedef enum { + NO_ERR, + POLL_TIMEOUT, + INVALID_SECTOR, + INVALID_BLOCK, +} ERROR_CODE; + +void spi_init_f(void); +void spi_init_r(void); +ssize_t spi_read(uchar *, int, uchar *, int); +ssize_t spi_write(uchar *, int, uchar *, int); + +char ReadStatusRegister(void); +void Wait_For_SPIF(void); +void SetupSPI(const int spi_setting); +void SPI_OFF(void); +void SendSingleCommand(const int iCommand); + +ERROR_CODE GetSectorNumber(unsigned long ulOffset, int *pnSector); +ERROR_CODE EraseBlock(int nBlock); +ERROR_CODE ReadData(unsigned long ulStart, long lCount, int *pnData); +ERROR_CODE WriteData(unsigned long ulStart, long lCount, int *pnData); +ERROR_CODE Wait_For_Status(char Statusbit); +ERROR_CODE Wait_For_WEL(void); + +/* + * Function: spi_init_f + * Description: Init SPI-Controller (ROM part) + * return: --- + */ +void spi_init_f(void) +{ +} + +/* + * Function: spi_init_r + * Description: Init SPI-Controller (RAM part) - + * The malloc engine is ready and we can move our buffers to + * normal RAM + * return: --- + */ +void spi_init_r(void) +{ + return; +} + +/* + * Function: spi_write + */ +ssize_t spi_write(uchar * addr, int alen, uchar * buffer, int len) +{ + unsigned long offset; + int start_block, end_block; + int start_byte, end_byte; + ERROR_CODE result = NO_ERR; + uchar temp[SECTOR_SIZE]; + int i, num; + + offset = addr[0] << 16 | addr[1] << 8 | addr[2]; + /* Get the start block number */ + result = GetSectorNumber(offset, &start_block); + if (result == INVALID_SECTOR) { + printf("Invalid sector! "); + return 0; + } + /* Get the end block number */ + result = GetSectorNumber(offset + len - 1, &end_block); + if (result == INVALID_SECTOR) { + printf("Invalid sector! "); + return 0; + } + + for (num = start_block; num <= end_block; num++) { + ReadData(num * SECTOR_SIZE, SECTOR_SIZE, (int *)temp); + start_byte = num * SECTOR_SIZE; + end_byte = (num + 1) * SECTOR_SIZE - 1; + if (start_byte < offset) + start_byte = offset; + if (end_byte > (offset + len)) + end_byte = (offset + len - 1); + for (i = start_byte; i <= end_byte; i++) + temp[i - num * SECTOR_SIZE] = buffer[i - offset]; + EraseBlock(num); + result = WriteData(num * SECTOR_SIZE, SECTOR_SIZE, (int *)temp); + if (result != NO_ERR) + return 0; + printf("."); + } + return len; +} + +/* + * Function: spi_read + */ +ssize_t spi_read(uchar * addr, int alen, uchar * buffer, int len) +{ + unsigned long offset; + offset = addr[0] << 16 | addr[1] << 8 | addr[2]; + ReadData(offset, len, (int *)buffer); + return len; +} + +void SendSingleCommand(const int iCommand) +{ + unsigned short dummy; + + /* turns on the SPI in single write mode */ + SetupSPI((COMMON_SPI_SETTINGS | TIMOD01)); + + /* sends the actual command to the SPI TX register */ + *pSPI_TDBR = iCommand; + sync(); + + /* The SPI status register will be polled to check the SPIF bit */ + Wait_For_SPIF(); + + dummy = *pSPI_RDBR; + + /* The SPI will be turned off */ + SPI_OFF(); + +} + +void SetupSPI(const int spi_setting) +{ + + if (icache_status() || dcache_status()) + udelay(CONFIG_CCLK_HZ / 50000000); + /*sets up the PF10 to be the slave select of the SPI */ + *pPORTF_FER |= (PF10 | PF11 | PF12 | PF13); + *pSPI_FLG = 0xFF02; + *pSPI_BAUD = CONFIG_SPI_BAUD; + *pSPI_CTL = spi_setting; + sync(); + + *pSPI_FLG = 0xFD02; + sync(); +} + +void SPI_OFF(void) +{ + + *pSPI_CTL = 0x0400; /* disable SPI */ + *pSPI_FLG = 0; + *pSPI_BAUD = 0; + sync(); + udelay(CONFIG_CCLK_HZ / 50000000); + +} + +void Wait_For_SPIF(void) +{ + unsigned short dummyread; + while ((*pSPI_STAT & TXS)) ; + while (!(*pSPI_STAT & SPIF)) ; + while (!(*pSPI_STAT & RXS)) ; + /* Read dummy to empty the receive register */ + dummyread = *pSPI_RDBR; +} + +ERROR_CODE Wait_For_WEL(void) +{ + int i; + char status_register = 0; + ERROR_CODE ErrorCode = NO_ERR; + + for (i = 0; i < TIMEOUT; i++) { + status_register = ReadStatusRegister(); + if ((status_register & WEL)) { + ErrorCode = NO_ERR; + break; + } + ErrorCode = POLL_TIMEOUT; /* Time out error */ + }; + + return ErrorCode; +} + +ERROR_CODE Wait_For_Status(char Statusbit) +{ + int i; + char status_register = 0xFF; + ERROR_CODE ErrorCode = NO_ERR; + + for (i = 0; i < TIMEOUT; i++) { + status_register = ReadStatusRegister(); + if (!(status_register & Statusbit)) { + ErrorCode = NO_ERR; + break; + } + ErrorCode = POLL_TIMEOUT; /* Time out error */ + }; + + return ErrorCode; +} + +char ReadStatusRegister(void) +{ + char status_register = 0; + + SetupSPI((COMMON_SPI_SETTINGS | TIMOD01)); /* Turn on the SPI */ + + *pSPI_TDBR = SPI_RDSR; /* send instruction to read status register */ + sync(); + Wait_For_SPIF(); /*wait until the instruction has been sent */ + *pSPI_TDBR = 0; /*send dummy to receive the status register */ + sync(); + Wait_For_SPIF(); /*wait until the data has been sent */ + status_register = *pSPI_RDBR; /*read the status register */ + + SPI_OFF(); /* Turn off the SPI */ + + return status_register; +} + +ERROR_CODE GetSectorNumber(unsigned long ulOffset, int *pnSector) +{ + int nSector = 0; + ERROR_CODE ErrorCode = NO_ERR; + + if (ulOffset > (NUM_SECTORS * 0x10000 - 1)) { + ErrorCode = INVALID_SECTOR; + return ErrorCode; + } + + nSector = (int)ulOffset / 0x10000; + *pnSector = nSector; + + return ErrorCode; +} + +ERROR_CODE EraseBlock(int nBlock) +{ + unsigned long ulSectorOff = 0x0, ShiftValue; + ERROR_CODE ErrorCode = NO_ERR; + + /* if the block is invalid just return */ + if ((nBlock < 0) || (nBlock > NUM_SECTORS)) { + ErrorCode = INVALID_BLOCK; + return ErrorCode; + } + /* figure out the offset of the block in flash */ + if ((nBlock >= 0) && (nBlock < NUM_SECTORS)) { + ulSectorOff = (nBlock * SECTOR_SIZE); + + } else { + ErrorCode = INVALID_BLOCK; + return ErrorCode; + } + + /* A write enable instruction must previously have been executed */ + SendSingleCommand(SPI_WREN); + + /* The status register will be polled to check the write enable latch "WREN" */ + ErrorCode = Wait_For_WEL(); + + if (POLL_TIMEOUT == ErrorCode) { + printf("SPI Erase block error\n"); + return ErrorCode; + } else + + /* Turn on the SPI to send single commands */ + SetupSPI((COMMON_SPI_SETTINGS | TIMOD01)); + + /* + * Send the erase block command to the flash followed by the 24 address + * to point to the start of a sector + */ + *pSPI_TDBR = SPI_SE; + sync(); + Wait_For_SPIF(); + /* Send the highest byte of the 24 bit address at first */ + ShiftValue = (ulSectorOff >> 16); + *pSPI_TDBR = ShiftValue; + sync(); + /* Wait until the instruction has been sent */ + Wait_For_SPIF(); + /* Send the middle byte of the 24 bit address at second */ + ShiftValue = (ulSectorOff >> 8); + *pSPI_TDBR = ShiftValue; + sync(); + /* Wait until the instruction has been sent */ + Wait_For_SPIF(); + /* Send the lowest byte of the 24 bit address finally */ + *pSPI_TDBR = ulSectorOff; + sync(); + /* Wait until the instruction has been sent */ + Wait_For_SPIF(); + + /* Turns off the SPI */ + SPI_OFF(); + + /* Poll the status register to check the Write in Progress bit */ + /* Sector erase takes time */ + ErrorCode = Wait_For_Status(WIP); + + /* block erase should be complete */ + return ErrorCode; +} + +/* + * ERROR_CODE ReadData() + * Read a value from flash for verify purpose + * Inputs: unsigned long ulStart - holds the SPI start address + * int pnData - pointer to store value read from flash + * long lCount - number of elements to read + */ +ERROR_CODE ReadData(unsigned long ulStart, long lCount, int *pnData) +{ + unsigned long ShiftValue; + char *cnData; + int i; + + /* Pointer cast to be able to increment byte wise */ + + cnData = (char *)pnData; + /* Start SPI interface */ + SetupSPI((COMMON_SPI_SETTINGS | TIMOD01)); + +#ifdef CONFIG_SPI_FLASH_FAST_READ + /* Send the read command to SPI device */ + *pSPI_TDBR = SPI_FAST_READ; +#else + /* Send the read command to SPI device */ + *pSPI_TDBR = SPI_READ; +#endif + sync(); + /* Wait until the instruction has been sent */ + Wait_For_SPIF(); + /* Send the highest byte of the 24 bit address at first */ + ShiftValue = (ulStart >> 16); + /* Send the byte to the SPI device */ + *pSPI_TDBR = ShiftValue; + sync(); + /* Wait until the instruction has been sent */ + Wait_For_SPIF(); + /* Send the middle byte of the 24 bit address at second */ + ShiftValue = (ulStart >> 8); + /* Send the byte to the SPI device */ + *pSPI_TDBR = ShiftValue; + sync(); + /* Wait until the instruction has been sent */ + Wait_For_SPIF(); + /* Send the lowest byte of the 24 bit address finally */ + *pSPI_TDBR = ulStart; + sync(); + /* Wait until the instruction has been sent */ + Wait_For_SPIF(); + +#ifdef CONFIG_SPI_FLASH_FAST_READ + /* Send dummy for FAST_READ */ + *pSPI_TDBR = 0; + sync(); + /* Wait until the instruction has been sent */ + Wait_For_SPIF(); +#endif + + /* After the SPI device address has been placed on the MOSI pin the data can be */ + /* received on the MISO pin. */ + for (i = 0; i < lCount; i++) { + *pSPI_TDBR = 0; + sync(); + while (!(*pSPI_STAT & RXS)) ; + *cnData++ = *pSPI_RDBR; + + if ((i >= SECTOR_SIZE) && (i % SECTOR_SIZE == 0)) + printf("."); + } + + /* Turn off the SPI */ + SPI_OFF(); + + return NO_ERR; +} + +ERROR_CODE WriteFlash(unsigned long ulStartAddr, long lTransferCount, + int *iDataSource, long *lWriteCount) +{ + + unsigned long ulWAddr; + long lWTransferCount = 0; + int i; + char iData; + char *temp = (char *)iDataSource; + ERROR_CODE ErrorCode = NO_ERR; + + /* First, a Write Enable Command must be sent to the SPI. */ + SendSingleCommand(SPI_WREN); + + /* + * Second, the SPI Status Register will be tested whether the + * Write Enable Bit has been set + */ + ErrorCode = Wait_For_WEL(); + if (POLL_TIMEOUT == ErrorCode) { + printf("SPI Write Time Out\n"); + return ErrorCode; + } else + /* Third, the 24 bit address will be shifted out + * the SPI MOSI bytewise. + * Turns the SPI on + */ + SetupSPI((COMMON_SPI_SETTINGS | TIMOD01)); + *pSPI_TDBR = SPI_PP; + sync(); + /*wait until the instruction has been sent */ + Wait_For_SPIF(); + ulWAddr = (ulStartAddr >> 16); + *pSPI_TDBR = ulWAddr; + sync(); + /*wait until the instruction has been sent */ + Wait_For_SPIF(); + ulWAddr = (ulStartAddr >> 8); + *pSPI_TDBR = ulWAddr; + sync(); + /*wait until the instruction has been sent */ + Wait_For_SPIF(); + ulWAddr = ulStartAddr; + *pSPI_TDBR = ulWAddr; + sync(); + /*wait until the instruction has been sent */ + Wait_For_SPIF(); + /* + * Fourth, maximum number of 256 bytes will be taken from the Buffer + * and sent to the SPI device. + */ + for (i = 0; (i < lTransferCount) && (i < 256); i++, lWTransferCount++) { + iData = *temp; + *pSPI_TDBR = iData; + sync(); + /*wait until the instruction has been sent */ + Wait_For_SPIF(); + temp++; + } + + /* Turns the SPI off */ + SPI_OFF(); + + /* + * Sixth, the SPI Write in Progress Bit must be toggled to ensure the + * programming is done before start of next transfer + */ + ErrorCode = Wait_For_Status(WIP); + + if (POLL_TIMEOUT == ErrorCode) { + printf("SPI Program Time out!\n"); + return ErrorCode; + } else + + *lWriteCount = lWTransferCount; + + return ErrorCode; +} + +ERROR_CODE WriteData(unsigned long ulStart, long lCount, int *pnData) +{ + + unsigned long ulWStart = ulStart; + long lWCount = lCount, lWriteCount; + long *pnWriteCount = &lWriteCount; + + ERROR_CODE ErrorCode = NO_ERR; + + while (lWCount != 0) { + ErrorCode = WriteFlash(ulWStart, lWCount, pnData, pnWriteCount); + + /* + * After each function call of WriteFlash the counter + * must be adjusted + */ + lWCount -= *pnWriteCount; + + /* Also, both address pointers must be recalculated. */ + ulWStart += *pnWriteCount; + pnData += *pnWriteCount / 4; + } + + /* return the appropriate error code */ + return ErrorCode; +} + +#endif /* CONFIG_SPI */ diff --git a/board/bf537-stamp/u-boot.lds.S b/board/bf537-stamp/u-boot.lds.S new file mode 100644 index 0000000..3fb2d0c --- /dev/null +++ b/board/bf537-stamp/u-boot.lds.S @@ -0,0 +1,190 @@ +/* + * U-boot - u-boot.lds.S + * + * Copyright (c) 2005-2007 Analog Device Inc. + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> + +OUTPUT_ARCH(bfin) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +MEMORY + { + ram : ORIGIN = (CFG_MONITOR_BASE), LENGTH = (256 * 1024) + l1_code : ORIGIN = 0xFFA00000, LENGTH = 0xC000 + l1_data : ORIGIN = 0xFF900000, LENGTH = 0x4000 + } + +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; /*0x1000;*/ + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + . = CFG_MONITOR_BASE; + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector before the environment sector. If it throws */ + /* an error during compilation remove an object here to get */ + /* it linked after the configuration sector. */ + + cpu/bf537/start.o (.text) + cpu/bf537/start1.o (.text) + cpu/bf537/traps.o (.text) + cpu/bf537/interrupt.o (.text) + cpu/bf537/serial.o (.text) + common/dlmalloc.o (.text) +/* lib_blackfin/bf533_string.o (.text) */ +/* lib_generic/vsprintf.o (.text) */ + lib_generic/crc32.o (.text) +/* lib_generic/zlib.o (.text) */ +/* board/bf537-stamp/bf537-stamp.o (.text) */ + + . = DEFINED(env_offset) ? env_offset : .; + common/environment.o (.text) + + *(EXCLUDE_FILE (board/bf537-stamp/post-memory.o) .text) + *(.fixup) + *(.got1) + } > ram + _etext = .; + PROVIDE (etext = .); + .text_l1 : + { + . = ALIGN(4) ; + _text_l1 = .; + PROVIDE (text_l1 = .); + board/bf537-stamp/post-memory.o (.text) + . = ALIGN(4) ; + _etext_l1 = .; + PROVIDE (etext_l1 = .); + } > l1_code AT > ram + + .rodata : + { + . = ALIGN(4); + *(EXCLUDE_FILE (board/bf537-stamp/post-memory.o) .rodata) + *(EXCLUDE_FILE (board/bf537-stamp/post-memory.o) .rodata1) + *(EXCLUDE_FILE (board/bf537-stamp/post-memory.o) .rodata.str1.4) + *(.eh_frame) + . = ALIGN(4); + } > ram + + . = ALIGN(4); + _erodata = .; + PROVIDE (erodata = .); + .rodata_l1 : + { + . = ALIGN(4) ; + _rodata_l1 = .; + PROVIDE (rodata_l1 = .); + board/bf537-stamp/post-memory.o (.rodata) + board/bf537-stamp/post-memory.o (.rodata1) + board/bf537-stamp/post-memory.o (.rodata.str1.4) + . = ALIGN(4) ; + _erodata_l1 = .; + PROVIDE(erodata_l1 = .); + } > l1_data AT > ram + + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } > ram + _edata = .; + PROVIDE (edata = .); + + ___u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } > ram + ___u_boot_cmd_end = .; + + + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + .bss : + { + __bss_start = .; + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } > ram + _end = . ; + PROVIDE (end = .); +} diff --git a/board/ezkit533/Makefile b/board/bf561-ezkit/Makefile index 4f3c223..a3c2e5b 100644 --- a/board/ezkit533/Makefile +++ b/board/bf561-ezkit/Makefile @@ -1,7 +1,7 @@ # # U-boot - Makefile # -# Copyright (c) 2005 blackfin.uclinux.org +# Copyright (c) 2005-2007 Analog Device Inc. # # (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -29,14 +29,24 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o ezkit533.o +COBJS := $(BOARD).o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(obj).depend $(OBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(SOBJS) u-boot.lds + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +u-boot.lds: u-boot.lds.S + $(CPP) $(CPPFLAGS) -P -Ubfin $^ > $@.tmp + mv -f $@.tmp $@ + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend ######################################################################### diff --git a/board/bf561-ezkit/bf561-ezkit.c b/board/bf561-ezkit/bf561-ezkit.c new file mode 100644 index 0000000..71281c0 --- /dev/null +++ b/board/bf561-ezkit/bf561-ezkit.c @@ -0,0 +1,73 @@ +/* + * U-boot - ezkit561.c + * + * Copyright (c) 2005 Bas Vermeulen <bas@buyways.nl> + * Copyright (c) 2005 blackfin.uclinux.org + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> + +int checkboard(void) +{ + printf("CPU: ADSP BF561\n"); + printf("Board: ADI BF561 EZ-Kit Lite board\n"); + printf(" Support: http://blackfin.uclinux.org/\n"); + return 0; +} + +long int initdram(int board_type) +{ + DECLARE_GLOBAL_DATA_PTR; +#ifdef DEBUG + int brate; + char *tmp = getenv("baudrate"); + brate = simple_strtoul(tmp, NULL, 16); + printf("Serial Port initialized with Baud rate = %x\n", brate); + printf("SDRAM attributes:\n"); + printf("tRCD %d SCLK Cycles,tRP %d SCLK Cycles,tRAS %d SCLK Cycles" + "tWR %d SCLK Cycles,CAS Latency %d SCLK cycles \n", + 3, 3, 6, 2, 3); + printf("SDRAM Begin: 0x%x\n", CFG_SDRAM_BASE); + printf("Bank size = %d MB\n", CFG_MAX_RAM_SIZE >> 20); +#endif + gd->bd->bi_memstart = CFG_SDRAM_BASE; + gd->bd->bi_memsize = CFG_MAX_RAM_SIZE; + return CFG_MAX_RAM_SIZE; +} + +#if defined(CONFIG_MISC_INIT_R) +/* miscellaneous platform dependent initialisations */ +int misc_init_r(void) +{ + /* Keep PF12 low to be able to drive the USB-LAN Extender */ + *pFIO0_DIR = 0x0000; + *pFIO0_FLAG_C = 0x1000; /* Clear PF12 */ + sync(); + *pFIO0_POLAR = 0x0000; + sync(); + + return 0; +} +#endif diff --git a/board/bf561-ezkit/config.mk b/board/bf561-ezkit/config.mk new file mode 100644 index 0000000..a623c3d --- /dev/null +++ b/board/bf561-ezkit/config.mk @@ -0,0 +1,25 @@ +# +# (C) Copyright 2001 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# TEXT_BASE should be defined as the MAX_SDRAM Address - 256k bytes +# 256k is defined as CFG_MONITOR_LEN in ./include/configs/<board>.h +TEXT_BASE = 0x03FC0000 diff --git a/board/bf561-ezkit/u-boot.lds.S b/board/bf561-ezkit/u-boot.lds.S new file mode 100644 index 0000000..84df5fc --- /dev/null +++ b/board/bf561-ezkit/u-boot.lds.S @@ -0,0 +1,153 @@ +/* + * U-boot - u-boot.lds.S + * + * Copyright (c) 2005-2007 Analog Device Inc. + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> + +OUTPUT_ARCH(bfin) +OUTPUT_ARCH(bfin) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + . = CFG_MONITOR_BASE; + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector before the environment sector. If it throws */ + /* an error during compilation remove an object here to get */ + /* it linked after the configuration sector. */ + + cpu/bf561/start.o (.text) + cpu/bf561/start1.o (.text) + cpu/bf561/traps.o (.text) + cpu/bf561/interrupt.o (.text) + cpu/bf561/serial.o (.text) + common/dlmalloc.o (.text) +/* lib_blackfin/bf533_string.o (.text) */ +/* lib_generic/vsprintf.o (.text) */ + lib_generic/crc32.o (.text) + lib_generic/zlib.o (.text) + board/bf561-ezkit/bf561-ezkit.o (.text) + + . = DEFINED(env_offset) ? env_offset : .; + common/environment.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + ___u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + ___u_boot_cmd_end = .; + + + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index 7aae8a6..727b872 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -258,7 +258,7 @@ int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) if (hdr->ih_arch != IH_CPU_MICROBLAZE) #elif defined(__nios2__) if (hdr->ih_arch != IH_CPU_NIOS2) -#elif defined(__blackfin__) +#elif defined(__bfin__) if (hdr->ih_arch != IH_CPU_BLACKFIN) #elif defined(__avr32__) if (hdr->ih_arch != IH_CPU_AVR32) @@ -1367,6 +1367,7 @@ print_type (image_header_t *hdr) case IH_CPU_MICROBLAZE: arch = "Microblaze"; break; case IH_CPU_NIOS: arch = "Nios"; break; case IH_CPU_NIOS2: arch = "Nios-II"; break; + case IH_CPU_BLACKFIN: arch = "Blackfin"; break; default: arch = "Unknown Architecture"; break; } @@ -70,7 +70,7 @@ endif endif ifeq ($(ARCH),blackfin) -PLATFORM_CPPFLAGS+= -D__BLACKFIN__ -mno-underscore +PLATFORM_CPPFLAGS+= -D__BLACKFIN__ endif ifdef ARCH diff --git a/cpu/bf533/Makefile b/cpu/bf533/Makefile index 9f4a0d8..ee7842a 100644 --- a/cpu/bf533/Makefile +++ b/cpu/bf533/Makefile @@ -2,7 +2,7 @@ # # Copyright (c) 2005 blackfin.uclinux.org # -# (C) Copyright 2000-2006 +# (C) Copyright 2000-2004 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -28,14 +28,16 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(CPU).a -START = start.o start1.o interrupt.o cache.o cplbhdlr.o cplbmgr.o flush.o -COBJS = cpu.o traps.o ints.o serial.o interrupts.o +START = start.o start1.o interrupt.o cache.o flush.o init_sdram.o +COBJS = cpu.o traps.o ints.o serial.o interrupts.o video.o + +EXTRA = init_sdram_bootrom_initblock.o SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) START := $(addprefix $(obj),$(START)) -all: $(obj).depend $(START) $(LIB) +all: $(obj).depend $(START) $(LIB) $(obj).depend $(EXTRA) $(LIB): $(OBJS) $(AR) $(ARFLAGS) $@ $(OBJS) diff --git a/cpu/bf533/bf533_serial.h b/cpu/bf533/bf533_serial.h index d430e6c..0a04f3e 100644 --- a/cpu/bf533/bf533_serial.h +++ b/cpu/bf533/bf533_serial.h @@ -63,8 +63,7 @@ int serial_getc(void); void serial_puts(const char *s); static void local_put_char(char ch); -extern int get_clock(void); -int baud_table[5] = {9600, 19200, 38400, 57600, 115200}; +int baud_table[5] = { 9600, 19200, 38400, 57600, 115200 }; struct { unsigned char dl_high; diff --git a/cpu/bf533/cache.S b/cpu/bf533/cache.S index 8fac402..03aebe4 100644 --- a/cpu/bf533/cache.S +++ b/cpu/bf533/cache.S @@ -1,12 +1,11 @@ - - #define ASSEMBLY #include <asm/linkage.h> -#include <asm/cpu/def_LPBlackfin.h> +#include <config.h> +#include <asm/blackfin.h> .text .align 2 -ENTRY(blackfin_icache_flush_range) +ENTRY(_blackfin_icache_flush_range) R2 = -32; R2 = R0 & R2; P0 = R2; @@ -20,7 +19,7 @@ ENTRY(blackfin_icache_flush_range) SSYNC; RTS; -ENTRY(blackfin_dcache_flush_range) +ENTRY(_blackfin_dcache_flush_range) R2 = -32; R2 = R0 & R2; P0 = R2; @@ -35,19 +34,21 @@ ENTRY(blackfin_dcache_flush_range) RTS; ENTRY(_icache_invalidate) -ENTRY(invalidate_entire_icache) - [--SP] = ( R7:5); +ENTRY(_invalidate_entire_icache) + [--SP] = (R7:5); P0.L = (IMEM_CONTROL & 0xFFFF); P0.H = (IMEM_CONTROL >> 16); - R7 = [P0]; + R7 =[P0]; - /* Clear the IMC bit , All valid bits in the instruction + /* + * Clear the IMC bit , All valid bits in the instruction * cache are set to the invalid state */ - BITCLR(R7,IMC_P); + BITCLR(R7, IMC_P); CLI R6; - SSYNC; /* SSYNC required before invalidating cache. */ + /* SSYNC required before invalidating cache. */ + SSYNC; .align 8; [P0] = R7; SSYNC; @@ -58,54 +59,55 @@ ENTRY(invalidate_entire_icache) R7 = R7 | R6; CLI R6; - SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */ + SSYNC; .align 8; [P0] = R7; SSYNC; STI R6; - ( R7:5) = [SP++]; + (R7:5) =[SP++]; RTS; -/* Invalidate the Entire Data cache by +/* + * Invalidate the Entire Data cache by * clearing DMC[1:0] bits */ -ENTRY(invalidate_entire_dcache) +ENTRY(_invalidate_entire_dcache) ENTRY(_dcache_invalidate) - [--SP] = ( R7:6); + [--SP] = (R7:6); P0.L = (DMEM_CONTROL & 0xFFFF); P0.H = (DMEM_CONTROL >> 16); - R7 = [P0]; + R7 =[P0]; - /* Clear the DMC[1:0] bits, All valid bits in the data + /* + * Clear the DMC[1:0] bits, All valid bits in the data * cache are set to the invalid state */ - BITCLR(R7,DMC0_P); - BITCLR(R7,DMC1_P); + BITCLR(R7, DMC0_P); + BITCLR(R7, DMC1_P); CLI R6; - SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */ + SSYNC; .align 8; [P0] = R7; SSYNC; STI R6; - /* Configures the data cache again */ R6 = (ACACHE_BCACHE | ENDCPLB | PORT_PREF0); R7 = R7 | R6; CLI R6; - SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */ + SSYNC; .align 8; [P0] = R7; SSYNC; STI R6; - ( R7:6) = [SP++]; + (R7:6) =[SP++]; RTS; -ENTRY(blackfin_dcache_invalidate_range) +ENTRY(_blackfin_dcache_invalidate_range) R2 = -32; R2 = R0 & R2; P0 = R2; @@ -113,13 +115,14 @@ ENTRY(blackfin_dcache_invalidate_range) CSYNC; 1: FLUSHINV[P0++]; - CC = P0 < P1 (iu); - IF CC JUMP 1b (bp); + CC = P0 < P1(iu); + IF CC JUMP 1b(bp); - /* If the data crosses a cache line, then we'll be pointing to - ** the last cache line, but won't have flushed/invalidated it yet, so do - ** one more. - */ + /* + * If the data crosses a cache line, then we'll be pointing to + * the last cache line, but won't have flushed/invalidated it yet, so do + * one more. + */ FLUSHINV[P0]; SSYNC; RTS; diff --git a/cpu/bf533/config.mk b/cpu/bf533/config.mk index a9d529e..10817d9 100644 --- a/cpu/bf533/config.mk +++ b/cpu/bf533/config.mk @@ -24,4 +24,4 @@ # MA 02111-1307 USA # -PLATFORM_RELFLAGS += -ffixed-P5 +PLATFORM_RELFLAGS += -mcpu=bf533 -ffixed-P5 diff --git a/cpu/bf533/cplbhdlr.S b/cpu/bf533/cplbhdlr.S deleted file mode 100644 index 61be5bb..0000000 --- a/cpu/bf533/cplbhdlr.S +++ /dev/null @@ -1,193 +0,0 @@ -/* Copyright (C) 2003 Analog Devices, Inc. All Rights Reserved. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. - * - * Blackfin BF533/2.6 support : LG Soft India - */ - - -/* Include an exception handler to invoke the CPLB manager - */ - -#include <asm-blackfin/linkage.h> -#include <asm/cplb.h> -#include <asm/entry.h> - - -.text - -.globl _cplb_hdr; -.type _cplb_hdr, STT_FUNC; -.extern _cplb_mgr; -.type _cplb_mgr, STT_FUNC; -.extern __unknown_exception_occurred; -.type __unknown_exception_occurred, STT_FUNC; -.extern __cplb_miss_all_locked; -.type __cplb_miss_all_locked, STT_FUNC; -.extern __cplb_miss_without_replacement; -.type __cplb_miss_without_replacement, STT_FUNC; -.extern __cplb_protection_violation; -.type __cplb_protection_violation, STT_FUNC; -.extern panic_pv; - -.align 2; - -ENTRY(_cplb_hdr) - SSYNC; - [--SP] = ( R7:0, P5:0 ); - [--SP] = ASTAT; - [--SP] = SEQSTAT; - [--SP] = I0; - [--SP] = I1; - [--SP] = I2; - [--SP] = I3; - [--SP] = LT0; - [--SP] = LB0; - [--SP] = LC0; - [--SP] = LT1; - [--SP] = LB1; - [--SP] = LC1; - R2 = SEQSTAT; - - /*Mask the contents of SEQSTAT and leave only EXCAUSE in R2*/ - R2 <<= 26; - R2 >>= 26; - - R1 = 0x23; /* Data access CPLB protection violation */ - CC = R2 == R1; - IF !CC JUMP not_data_write; - R0 = 2; /* is a write to data space*/ - JUMP is_icplb_miss; - -not_data_write: - R1 = 0x2C; /* CPLB miss on an instruction fetch */ - CC = R2 == R1; - R0 = 0; /* is_data_miss == False*/ - IF CC JUMP is_icplb_miss; - - R1 = 0x26; - CC = R2 == R1; - IF !CC JUMP unknown; - - R0 = 1; /* is_data_miss == True*/ - -is_icplb_miss: - -#if ( defined (CONFIG_BLKFIN_CACHE) || defined (CONFIG_BLKFIN_DCACHE)) -#if ( defined (CONFIG_BLKFIN_CACHE) && !defined (CONFIG_BLKFIN_DCACHE)) - R1 = CPLB_ENABLE_ICACHE; -#endif -#if ( !defined (CONFIG_BLKFIN_CACHE) && defined (CONFIG_BLKFIN_DCACHE)) - R1 = CPLB_ENABLE_DCACHE; -#endif -#if ( defined (CONFIG_BLKFIN_CACHE) && defined (CONFIG_BLKFIN_DCACHE)) - R1 = CPLB_ENABLE_DCACHE | CPLB_ENABLE_ICACHE; -#endif -#else - R1 = 0; -#endif - - [--SP] = RETS; - CALL _cplb_mgr; - RETS = [SP++]; - CC = R0 == 0; - IF !CC JUMP not_replaced; - LC1 = [SP++]; - LB1 = [SP++]; - LT1 = [SP++]; - LC0 = [SP++]; - LB0 = [SP++]; - LT0 = [SP++]; - I3 = [SP++]; - I2 = [SP++]; - I1 = [SP++]; - I0 = [SP++]; - SEQSTAT = [SP++]; - ASTAT = [SP++]; - ( R7:0, P5:0 ) = [SP++]; - RTS; - -unknown: - [--SP] = RETS; - CALL __unknown_exception_occurred; - RETS = [SP++]; - JUMP unknown; -not_replaced: - CC = R0 == CPLB_NO_UNLOCKED; - IF !CC JUMP next_check; - [--SP] = RETS; - CALL __cplb_miss_all_locked; - RETS = [SP++]; -next_check: - CC = R0 == CPLB_NO_ADDR_MATCH; - IF !CC JUMP next_check2; - [--SP] = RETS; - CALL __cplb_miss_without_replacement; - RETS = [SP++]; - JUMP not_replaced; -next_check2: - CC = R0 == CPLB_PROT_VIOL; - IF !CC JUMP strange_return_from_cplb_mgr; - [--SP] = RETS; - CALL __cplb_protection_violation; - RETS = [SP++]; - JUMP not_replaced; -strange_return_from_cplb_mgr: - IDLE; - CSYNC; - JUMP strange_return_from_cplb_mgr; - -/************************************ - * Diagnostic exception handlers - */ - -__cplb_miss_all_locked: - sp += -12; - R0 = CPLB_NO_UNLOCKED; - call panic_bfin; - SP += 12; - RTS; - - __cplb_miss_without_replacement: - sp += -12; - R0 = CPLB_NO_ADDR_MATCH; - call panic_bfin; - SP += 12; - RTS; - -__cplb_protection_violation: - sp += -12; - R0 = CPLB_PROT_VIOL; - call panic_bfin; - SP += 12; - RTS; - -__unknown_exception_occurred: - - /* This function is invoked by the default exception - * handler, if it does not recognise the kind of - * exception that has occurred. In other words, the - * default handler only handles some of the system's - * exception types, and it does not expect any others - * to occur. If your application is going to be using - * other kinds of exceptions, you must replace the - * default handler with your own, that handles all the - * exceptions you will use. - * - * Since there's nothing we can do, we just loop here - * at what we hope is a suitably informative label. - */ - - IDLE; -do_not_know_what_to_do: - CSYNC; - JUMP __unknown_exception_occurred; - - RTS; -.__unknown_exception_occurred.end: -.global __unknown_exception_occurred; -.type __unknown_exception_occurred, STT_FUNC; - -panic_bfin: - RTS; diff --git a/cpu/bf533/cplbmgr.S b/cpu/bf533/cplbmgr.S deleted file mode 100644 index 7a0b048..0000000 --- a/cpu/bf533/cplbmgr.S +++ /dev/null @@ -1,601 +0,0 @@ -/*This file is subject to the terms and conditions of the GNU General Public - * License. - * - * Blackfin BF533/2.6 support : LG Soft India - * Modification: Dec 07 2004 - * 1. Correction in icheck_lock. Valid lock entries were - * geting victimized, for instruction cplb replacement. - * 2. Setup loop's are modified as now toolchain support's P Indexed - * addressing - * :LG Soft India - * - */ - -/* Usage: int _cplb_mgr(is_data_miss,int enable_cache) - * is_data_miss==2 => Mark as Dirty, write to the clean data page - * is_data_miss==1 => Replace a data CPLB. - * is_data_miss==0 => Replace an instruction CPLB. - * - * Returns: - * CPLB_RELOADED => Successfully updated CPLB table. - * CPLB_NO_UNLOCKED => All CPLBs are locked, so cannot be evicted.This indicates - * that the CPLBs in the configuration tablei are badly - * configured, as this should never occur. - * CPLB_NO_ADDR_MATCH => The address being accessed, that triggered the exception, - * is not covered by any of the CPLBs in the configuration - * table. The application isi presumably misbehaving. - * CPLB_PROT_VIOL => The address being accessed, that triggered thei exception, - * was not a first-write to a clean Write Back Data page, - * and so presumably is a genuine violation of the page's - * protection attributes. The application is misbehaving. - */ -#define ASSEMBLY - -#include <asm-blackfin/linkage.h> -#include <asm-blackfin/blackfin.h> -#include <asm-blackfin/cplbtab.h> -#include <asm-blackfin/cplb.h> - -.text - -.align 2; -ENTRY(_cplb_mgr) - - [--SP]=( R7:0,P5:0 ); - - CC = R0 == 2; - IF CC JUMP dcplb_write; - - CC = R0 == 0; - IF !CC JUMP dcplb_miss_compare; - - /* ICPLB Miss Exception. We need to choose one of the - * currently-installed CPLBs, and replace it with one - * from the configuration table. - */ - - P4.L = (ICPLB_FAULT_ADDR & 0xFFFF); - P4.H = (ICPLB_FAULT_ADDR >> 16); - - P1 = 16; - P5.L = page_size_table; - P5.H = page_size_table; - - P0.L = (ICPLB_DATA0 & 0xFFFF); - P0.H = (ICPLB_DATA0 >> 16); - R4 = [P4]; /* Get faulting address*/ - R6 = 64; /* Advance past the fault address, which*/ - R6 = R6 + R4; /* we'll use if we find a match*/ - R3 = ((16 << 8) | 2); /* Extract mask, bits 16 and 17.*/ - - R5 = 0; -isearch: - - R1 = [P0-0x100]; /* Address for this CPLB */ - - R0 = [P0++]; /* Info for this CPLB*/ - CC = BITTST(R0,0); /* Is the CPLB valid?*/ - IF !CC JUMP nomatch; /* Skip it, if not.*/ - CC = R4 < R1(IU); /* If fault address less than page start*/ - IF CC JUMP nomatch; /* then skip this one.*/ - R2 = EXTRACT(R0,R3.L) (Z); /* Get page size*/ - P1 = R2; - P1 = P5 + (P1<<2); /* index into page-size table*/ - R2 = [P1]; /* Get the page size*/ - R1 = R1 + R2; /* and add to page start, to get page end*/ - CC = R4 < R1(IU); /* and see whether fault addr is in page.*/ - IF !CC R4 = R6; /* If so, advance the address and finish loop.*/ - IF !CC JUMP isearch_done; -nomatch: - /* Go around again*/ - R5 += 1; - CC = BITTST(R5, 4); /* i.e CC = R5 >= 16*/ - IF !CC JUMP isearch; - -isearch_done: - I0 = R4; /* Fault address we'll search for*/ - - /* set up pointers */ - P0.L = (ICPLB_DATA0 & 0xFFFF); - P0.H = (ICPLB_DATA0 >> 16); - - /* The replacement procedure for ICPLBs */ - - P4.L = (IMEM_CONTROL & 0xFFFF); - P4.H = (IMEM_CONTROL >> 16); - - /* disable cplbs */ - R5 = [P4]; /* Control Register*/ - BITCLR(R5,ENICPLB_P); - CLI R1; - SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */ - .align 8; - [P4] = R5; - SSYNC; - STI R1; - - R1 = -1; /* end point comparison */ - R3 = 16; /* counter */ - - /* Search through CPLBs for first non-locked entry */ - /* Overwrite it by moving everyone else up by 1 */ -icheck_lock: - R0 = [P0++]; - R3 = R3 + R1; - CC = R3 == R1; - IF CC JUMP all_locked; - CC = BITTST(R0, 0); /* an invalid entry is good */ - IF !CC JUMP ifound_victim; - CC = BITTST(R0,1); /* but a locked entry isn't */ - IF CC JUMP icheck_lock; - -ifound_victim: -#ifdef CONFIG_CPLB_INFO - R7 = [P0 - 0x104]; - P2.L = ipdt_table; - P2.H = ipdt_table; - P3.L = ipdt_swapcount_table; - P3.H = ipdt_swapcount_table; - P3 += -4; -icount: - R2 = [P2]; /* address from config table */ - P2 += 8; - P3 += 8; - CC = R2==-1; - IF CC JUMP icount_done; - CC = R7==R2; - IF !CC JUMP icount; - R7 = [P3]; - R7 += 1; - [P3] = R7; - CSYNC; -icount_done: -#endif - LC0=R3; - LSETUP(is_move,ie_move) LC0; -is_move: - R0 = [P0]; - [P0 - 4] = R0; - R0 = [P0 - 0x100]; - [P0-0x104] = R0; -ie_move:P0+=4; - - /* We've made space in the ICPLB table, so that ICPLB15 - * is now free to be overwritten. Next, we have to determine - * which CPLB we need to install, from the configuration - * table. This is a matter of getting the start-of-page - * addresses and page-lengths from the config table, and - * determining whether the fault address falls within that - * range. - */ - - P2.L = ipdt_table; - P2.H = ipdt_table; -#ifdef CONFIG_CPLB_INFO - P3.L = ipdt_swapcount_table; - P3.H = ipdt_swapcount_table; - P3 += -8; -#endif - P0.L = page_size_table; - P0.H = page_size_table; - - /* Retrieve our fault address (which may have been advanced - * because the faulting instruction crossed a page boundary). - */ - - R0 = I0; - - /* An extraction pattern, to get the page-size bits from - * the CPLB data entry. Bits 16-17, so two bits at posn 16. - */ - - R1 = ((16<<8)|2); -inext: R4 = [P2++]; /* address from config table */ - R2 = [P2++]; /* data from config table */ -#ifdef CONFIG_CPLB_INFO - P3 += 8; -#endif - - CC = R4 == -1; /* End of config table*/ - IF CC JUMP no_page_in_table; - - /* See if failed address > start address */ - CC = R4 <= R0(IU); - IF !CC JUMP inext; - - /* extract page size (17:16)*/ - R3 = EXTRACT(R2, R1.L) (Z); - - /* add page size to addr to get range */ - - P5 = R3; - P5 = P0 + (P5 << 2); /* scaled, for int access*/ - R3 = [P5]; - R3 = R3 + R4; - - /* See if failed address < (start address + page size) */ - CC = R0 < R3(IU); - IF !CC JUMP inext; - - /* We've found a CPLB in the config table that covers - * the faulting address, so install this CPLB into the - * last entry of the table. - */ - - P1.L = (ICPLB_DATA15 & 0xFFFF); /*ICPLB_DATA15*/ - P1.H = (ICPLB_DATA15 >> 16); - [P1] = R2; - [P1-0x100] = R4; -#ifdef CONFIG_CPLB_INFO - R3 = [P3]; - R3 += 1; - [P3] = R3; -#endif - - /* P4 points to IMEM_CONTROL, and R5 contains its old - * value, after we disabled ICPLBS. Re-enable them. - */ - - BITSET(R5,ENICPLB_P); - CLI R2; - SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */ - .align 8; - [P4] = R5; - SSYNC; - STI R2; - - ( R7:0,P5:0 ) = [SP++]; - R0 = CPLB_RELOADED; - RTS; - -/* FAILED CASES*/ -no_page_in_table: - ( R7:0,P5:0 ) = [SP++]; - R0 = CPLB_NO_ADDR_MATCH; - RTS; -all_locked: - ( R7:0,P5:0 ) = [SP++]; - R0 = CPLB_NO_UNLOCKED; - RTS; -prot_violation: - ( R7:0,P5:0 ) = [SP++]; - R0 = CPLB_PROT_VIOL; - RTS; - -dcplb_write: - - /* if a DCPLB is marked as write-back (CPLB_WT==0), and - * it is clean (CPLB_DIRTY==0), then a write to the - * CPLB's page triggers a protection violation. We have to - * mark the CPLB as dirty, to indicate that there are - * pending writes associated with the CPLB. - */ - - P4.L = (DCPLB_STATUS & 0xFFFF); - P4.H = (DCPLB_STATUS >> 16); - P3.L = (DCPLB_DATA0 & 0xFFFF); - P3.H = (DCPLB_DATA0 >> 16); - R5 = [P4]; - - /* A protection violation can be caused by more than just writes - * to a clean WB page, so we have to ensure that: - * - It's a write - * - to a clean WB page - * - and is allowed in the mode the access occurred. - */ - - CC = BITTST(R5, 16); /* ensure it was a write*/ - IF !CC JUMP prot_violation; - - /* to check the rest, we have to retrieve the DCPLB.*/ - - /* The low half of DCPLB_STATUS is a bit mask*/ - - R2 = R5.L (Z); /* indicating which CPLB triggered the event.*/ - R3 = 30; /* so we can use this to determine the offset*/ - R2.L = SIGNBITS R2; - R2 = R2.L (Z); /* into the DCPLB table.*/ - R3 = R3 - R2; - P4 = R3; - P3 = P3 + (P4<<2); - R3 = [P3]; /* Retrieve the CPLB*/ - - /* Now we can check whether it's a clean WB page*/ - - CC = BITTST(R3, 14); /* 0==WB, 1==WT*/ - IF CC JUMP prot_violation; - CC = BITTST(R3, 7); /* 0 == clean, 1 == dirty*/ - IF CC JUMP prot_violation; - - /* Check whether the write is allowed in the mode that was active.*/ - - R2 = 1<<3; /* checking write in user mode*/ - CC = BITTST(R5, 17); /* 0==was user, 1==was super*/ - R5 = CC; - R2 <<= R5; /* if was super, check write in super mode*/ - R2 = R3 & R2; - CC = R2 == 0; - IF CC JUMP prot_violation; - - /* It's a genuine write-to-clean-page.*/ - - BITSET(R3, 7); /* mark as dirty*/ - [P3] = R3; /* and write back.*/ - CSYNC; - ( R7:0,P5:0 ) = [SP++]; - R0 = CPLB_RELOADED; - RTS; - -dcplb_miss_compare: - - /* Data CPLB Miss event. We need to choose a CPLB to - * evict, and then locate a new CPLB to install from the - * config table, that covers the faulting address. - */ - - P1.L = (DCPLB_DATA15 & 0xFFFF); - P1.H = (DCPLB_DATA15 >> 16); - - P4.L = (DCPLB_FAULT_ADDR & 0xFFFF); - P4.H = (DCPLB_FAULT_ADDR >> 16); - R4 = [P4]; - I0 = R4; - - /* The replacement procedure for DCPLBs*/ - - R6 = R1; /* Save for later*/ - - /* Turn off CPLBs while we work.*/ - P4.L = (DMEM_CONTROL & 0xFFFF); - P4.H = (DMEM_CONTROL >> 16); - R5 = [P4]; - BITCLR(R5,ENDCPLB_P); - CLI R0; - SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */ - .align 8; - [P4] = R5; - SSYNC; - STI R0; - - /* Start looking for a CPLB to evict. Our order of preference - * is: invalid CPLBs, clean CPLBs, dirty CPLBs. Locked CPLBs - * are no good. - */ - - I1.L = (DCPLB_DATA0 & 0xFFFF); - I1.H = (DCPLB_DATA0 >> 16); - P1 = 3; - P2 = 16; - I2.L = dcplb_preference; - I2.H = dcplb_preference; - LSETUP(sdsearch1, edsearch1) LC0 = P1; -sdsearch1: - R0 = [I2++]; /* Get the bits we're interested in*/ - P0 = I1; /* Go back to start of table*/ - LSETUP (sdsearch2, edsearch2) LC1 = P2; -sdsearch2: - R1 = [P0++]; /* Fetch each installed CPLB in turn*/ - R2 = R1 & R0; /* and test for interesting bits.*/ - CC = R2 == 0; /* If none are set, it'll do.*/ - IF !CC JUMP skip_stack_check; - - R2 = [P0 - 0x104]; /* R2 - PageStart */ - P3.L = page_size_table; /* retrive end address */ - P3.H = page_size_table; /* retrive end address */ - R3 = 0x2; /* 0th - position, 2 bits -length */ - nop; /*Anamoly 05000209*/ - R7 = EXTRACT(R1,R3.l); - R7 = R7 << 2; /* Page size index offset */ - P5 = R7; - P3 = P3 + P5; - R7 = [P3]; /* page size in 1K bytes */ - - R7 = R7 << 0xA; /* in bytes * 1024*/ - R7 = R2 + R7; /* R7 - PageEnd */ - R4 = SP; /* Test SP is in range */ - - CC = R7 < R4; /* if PageEnd < SP */ - IF CC JUMP dfound_victim; - R3 = 0x284; /* stack length from start of trap till the point */ - /* 20 stack locations for future modifications */ - R4 = R4 + R3; - CC = R4 < R2; /* if SP + stacklen < PageStart */ - IF CC JUMP dfound_victim; -skip_stack_check: - -edsearch2: NOP; -edsearch1: NOP; - - /* If we got here, we didn't find a DCPLB we considered - * replacable, which means all of them were locked. - */ - - JUMP all_locked; -dfound_victim: - -#ifdef CONFIG_CPLB_INFO - R1 = [P0 - 0x104]; - P2.L = dpdt_table; - P2.H = dpdt_table; - P3.L = dpdt_swapcount_table; - P3.H = dpdt_swapcount_table; - P3 += -4; -dicount: - R2 = [P2]; - P2 += 8; - P3 += 8; - CC = R2==-1; - IF CC JUMP dicount_done; - CC = R1==R2; - IF !CC JUMP dicount; - R1 = [P3]; - R1 += 1; - [P3] = R1; - CSYNC; -dicount_done: -#endif - - /* Clean down the hardware loops*/ - R2 = 0; - LC1 = R2; - LC0 = R2; - - /* There's a suitable victim in [P0-4] (because we've - * advanced already). If it's a valid dirty write-back - * CPLB, we need to flush the pending writes first. - */ - - CC = BITTST(R1, 0); /* Is it valid?*/ - IF !CC JUMP Ddoverwrite;/* nope.*/ - CC = BITTST(R1, 7); /* Is it dirty?*/ - IF !CC JUMP Ddoverwrite (BP); /* Nope.*/ - CC = BITTST(R1, 14); /* Is it Write-Through?*/ - IF CC JUMP Ddoverwrite; /* Yep*/ - - /* This is a dirty page, so we need to flush all writes - * that are pending on the page. - */ - - /* Retrieve the page start address*/ - R0 = [P0 - 0x104]; - [--sp] = rets; - CALL dcplb_flush; /* R0==CPLB addr, R1==CPLB data*/ - rets = [sp++]; -Ddoverwrite: - - /* [P0-4] is a suitable victim CPLB, so we want to - * overwrite it by moving all the following CPLBs - * one space closer to the start. - */ - - R1.L = ((DCPLB_DATA15+4) & 0xFFFF); /*DCPLB_DATA15+4*/ - R1.H = ((DCPLB_DATA15+4) >> 16); - R0 = P0; - - /* If the victim happens to be in DCPLB15, - * we don't need to move anything. - */ - - CC = R1 == R0; - IF CC JUMP de_moved; - R1 = R1 - R0; - R1 >>= 2; - P1 = R1; - LSETUP(ds_move, de_move) LC0=P1; -ds_move: - R0 = [P0++]; /* move data */ - [P0 - 8] = R0; - R0 = [P0-0x104] /* move address */ -de_move: [P0-0x108] = R0; - - /* We've now made space in DCPLB15 for the new CPLB to be - * installed. The next stage is to locate a CPLB in the - * config table that covers the faulting address. - */ - -de_moved:NOP; - R0 = I0; /* Our faulting address */ - - P2.L = dpdt_table; - P2.H = dpdt_table; -#ifdef CONFIG_CPLB_INFO - P3.L = dpdt_swapcount_table; - P3.H = dpdt_swapcount_table; - P3 += -8; -#endif - - P1.L = page_size_table; - P1.H = page_size_table; - - /* An extraction pattern, to retrieve bits 17:16.*/ - - R1 = (16<<8)|2; -dnext: R4 = [P2++]; /* address */ - R2 = [P2++]; /* data */ -#ifdef CONFIG_CPLB_INFO - P3 += 8; -#endif - - CC = R4 == -1; - IF CC JUMP no_page_in_table; - - /* See if failed address > start address */ - CC = R4 <= R0(IU); - IF !CC JUMP dnext; - - /* extract page size (17:16)*/ - R3 = EXTRACT(R2, R1.L) (Z); - - /* add page size to addr to get range */ - - P5 = R3; - P5 = P1 + (P5 << 2); - R3 = [P5]; - R3 = R3 + R4; - - /* See if failed address < (start address + page size) */ - CC = R0 < R3(IU); - IF !CC JUMP dnext; - - /* We've found the CPLB that should be installed, so - * write it into CPLB15, masking off any caching bits - * if necessary. - */ - - P1.L = (DCPLB_DATA15 & 0xFFFF); - P1.H = (DCPLB_DATA15 >> 16); - - /* If the DCPLB has cache bits set, but caching hasn't - * been enabled, then we want to mask off the cache-in-L1 - * bit before installing. Moreover, if caching is off, we - * also want to ensure that the DCPLB has WT mode set, rather - * than WB, since WB pages still trigger first-write exceptions - * even when not caching is off, and the page isn't marked as - * cachable. Finally, we could mark the page as clean, not dirty, - * but we choose to leave that decision to the user; if the user - * chooses to have a CPLB pre-defined as dirty, then they always - * pay the cost of flushing during eviction, but don't pay the - * cost of first-write exceptions to mark the page as dirty. - */ - -#ifdef CONFIG_BLKFIN_WT - BITSET(R6, 14); /* Set WT*/ -#endif - - [P1] = R2; - [P1-0x100] = R4; -#ifdef CONFIG_CPLB_INFO - R3 = [P3]; - R3 += 1; - [P3] = R3; -#endif - - /* We've installed the CPLB, so re-enable CPLBs. P4 - * points to DMEM_CONTROL, and R5 is the value we - * last wrote to it, when we were disabling CPLBs. - */ - - BITSET(R5,ENDCPLB_P); - CLI R2; - .align 8; - [P4] = R5; - SSYNC; - STI R2; - - ( R7:0,P5:0 ) = [SP++]; - R0 = CPLB_RELOADED; - RTS; - -.data -.align 4; -page_size_table: -.byte4 0x00000400; /* 1K */ -.byte4 0x00001000; /* 4K */ -.byte4 0x00100000; /* 1M */ -.byte4 0x00400000; /* 4M */ - -.align 4; -dcplb_preference: -.byte4 0x00000001; /* valid bit */ -.byte4 0x00000082; /* dirty+lock bits */ -.byte4 0x00000002; /* lock bit */ diff --git a/cpu/bf533/cpu.c b/cpu/bf533/cpu.c index 78e2b96..ac8ec51 100644 --- a/cpu/bf533/cpu.c +++ b/cpu/bf533/cpu.c @@ -29,72 +29,19 @@ #include <asm/blackfin.h> #include <command.h> #include <asm/entry.h> +#include <asm/cplb.h> +#include <asm/io.h> -#define SSYNC() asm("ssync;") #define CACHE_ON 1 #define CACHE_OFF 0 -/* Data Attibutes*/ - -#define SDRAM_IGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID) -#define SDRAM_IKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) -#define L1_IMEMORY (PAGE_SIZE_1MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) -#define SDRAM_INON_CHBL (PAGE_SIZE_4MB | CPLB_USER_RD | CPLB_VALID) - -#define ANOMALY_05000158 0x200 -#define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) -#define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) -#define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158) -#define L1_DMEMORY (PAGE_SIZE_4KB | CPLB_L1_CHBL | CPLB_L1_AOW | CPLB_WT | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) -#define SDRAM_EBIU (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158) - -static unsigned int icplb_table[16][2]={ - {0xFFA00000, L1_IMEMORY}, - {0x00000000, SDRAM_IKERNEL}, /*SDRAM_Page1*/ - {0x00400000, SDRAM_IKERNEL}, /*SDRAM_Page1*/ - {0x07C00000, SDRAM_IKERNEL}, /*SDRAM_Page14*/ - {0x00800000, SDRAM_IGENERIC}, /*SDRAM_Page2*/ - {0x00C00000, SDRAM_IGENERIC}, /*SDRAM_Page2*/ - {0x01000000, SDRAM_IGENERIC}, /*SDRAM_Page4*/ - {0x01400000, SDRAM_IGENERIC}, /*SDRAM_Page5*/ - {0x01800000, SDRAM_IGENERIC}, /*SDRAM_Page6*/ - {0x01C00000, SDRAM_IGENERIC}, /*SDRAM_Page7*/ - {0x02000000, SDRAM_IGENERIC}, /*SDRAM_Page8*/ - {0x02400000, SDRAM_IGENERIC}, /*SDRAM_Page9*/ - {0x02800000, SDRAM_IGENERIC}, /*SDRAM_Page10*/ - {0x02C00000, SDRAM_IGENERIC}, /*SDRAM_Page11*/ - {0x03000000, SDRAM_IGENERIC}, /*SDRAM_Page12*/ - {0x03400000, SDRAM_IGENERIC}, /*SDRAM_Page13*/ -}; - -static unsigned int dcplb_table[16][2]={ - {0xFFA00000,L1_DMEMORY}, - {0x00000000,SDRAM_DKERNEL}, /*SDRAM_Page1*/ - {0x00400000,SDRAM_DKERNEL}, /*SDRAM_Page1*/ - {0x07C00000,SDRAM_DKERNEL}, /*SDRAM_Page15*/ - {0x00800000,SDRAM_DGENERIC}, /*SDRAM_Page2*/ - {0x00C00000,SDRAM_DGENERIC}, /*SDRAM_Page3*/ - {0x01000000,SDRAM_DGENERIC}, /*SDRAM_Page4*/ - {0x01400000,SDRAM_DGENERIC}, /*SDRAM_Page5*/ - {0x01800000,SDRAM_DGENERIC}, /*SDRAM_Page6*/ - {0x01C00000,SDRAM_DGENERIC}, /*SDRAM_Page7*/ - {0x02000000,SDRAM_DGENERIC}, /*SDRAM_Page8*/ - {0x02400000,SDRAM_DGENERIC}, /*SDRAM_Page9*/ - {0x02800000,SDRAM_DGENERIC}, /*SDRAM_Page10*/ - {0x02C00000,SDRAM_DGENERIC}, /*SDRAM_Page11*/ - {0x03000000,SDRAM_DGENERIC}, /*SDRAM_Page12*/ - {0x20000000,SDRAM_EBIU}, /*For Network */ -}; - -int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +extern unsigned int icplb_table[page_descriptor_table_size][2]; +extern unsigned int dcplb_table[page_descriptor_table_size][2]; + +int do_reset(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) { - __asm__ __volatile__ - ("cli r3;" - "P0 = %0;" - "JUMP (P0);" - : - : "r" (L1_ISRAM) - ); + __asm__ __volatile__("cli r3;" "P0 = %0;" "JUMP (P0);"::"r"(L1_ISRAM) + ); return 0; } @@ -112,29 +59,62 @@ int cleanup_before_linux(void) void icache_enable(void) { - unsigned int *I0,*I1; - int i; + unsigned int *I0, *I1; + int i, j = 0; + /* Before enable icache, disable it first */ + icache_disable(); I0 = (unsigned int *)ICPLB_ADDR0; I1 = (unsigned int *)ICPLB_DATA0; - for(i=0;i<16;i++){ - *I0++ = icplb_table[i][0]; - *I1++ = icplb_table[i][1]; + /* make sure the locked ones go in first */ + for (i = 0; i < page_descriptor_table_size; i++) { + if (CPLB_LOCK & icplb_table[i][1]) { + debug("adding %02i %02i 0x%08x 0x%08x\n", i, j, + icplb_table[i][0], icplb_table[i][1]); + *I0++ = icplb_table[i][0]; + *I1++ = icplb_table[i][1]; + j++; + } + } + + for (i = 0; i < page_descriptor_table_size; i++) { + if (!(CPLB_LOCK & icplb_table[i][1])) { + debug("adding %02i %02i 0x%08x 0x%08x\n", i, j, + icplb_table[i][0], icplb_table[i][1]); + *I0++ = icplb_table[i][0]; + *I1++ = icplb_table[i][1]; + j++; + if (j == 16) { + break; + } + } + } + + /* Fill the rest with invalid entry */ + if (j <= 15) { + for (; j <= 16; j++) { + debug("filling %i with 0", j); + *I1++ = 0x0; } + + } + cli(); - SSYNC(); + sync(); + asm(" .align 8; "); *(unsigned int *)IMEM_CONTROL = IMC | ENICPLB; - SSYNC(); + sync(); sti(); } void icache_disable(void) { cli(); - SSYNC(); + sync(); + asm(" .align 8; "); *(unsigned int *)IMEM_CONTROL &= ~(IMC | ENICPLB); - SSYNC(); + sync(); sti(); } @@ -143,7 +123,7 @@ int icache_status(void) unsigned int value; value = *(unsigned int *)IMEM_CONTROL; - if( value & (IMC|ENICPLB) ) + if (value & (IMC | ENICPLB)) return CACHE_ON; else return CACHE_OFF; @@ -151,38 +131,90 @@ int icache_status(void) void dcache_enable(void) { - unsigned int *I0,*I1; + unsigned int *I0, *I1; unsigned int temp; - int i; + int i, j = 0; + + /* Before enable dcache, disable it first */ + dcache_disable(); I0 = (unsigned int *)DCPLB_ADDR0; I1 = (unsigned int *)DCPLB_DATA0; - for(i=0;i<16;i++){ - *I0++ = dcplb_table[i][0]; - *I1++ = dcplb_table[i][1]; + /* make sure the locked ones go in first */ + for (i = 0; i < page_descriptor_table_size; i++) { + if (CPLB_LOCK & dcplb_table[i][1]) { + debug("adding %02i %02i 0x%08x 0x%08x\n", i, j, + dcplb_table[i][0], dcplb_table[i][1]); + *I0++ = dcplb_table[i][0]; + *I1++ = dcplb_table[i][1]; + j++; + } else { + debug("skip %02i %02i 0x%08x 0x%08x\n", i, j, + dcplb_table[i][0], dcplb_table[i][1]); + } + } + + for (i = 0; i < page_descriptor_table_size; i++) { + if (!(CPLB_LOCK & dcplb_table[i][1])) { + debug("adding %02i %02i 0x%08x 0x%08x\n", i, j, + dcplb_table[i][0], dcplb_table[i][1]); + *I0++ = dcplb_table[i][0]; + *I1++ = dcplb_table[i][1]; + j++; + if (j == 16) { + break; + } } + } + + /* Fill the rest with invalid entry */ + if (j <= 15) { + for (; j <= 16; j++) { + debug("filling %i with 0", j); + *I1++ = 0x0; + } + } + cli(); temp = *(unsigned int *)DMEM_CONTROL; - SSYNC(); - *(unsigned int *)DMEM_CONTROL = ACACHE_BCACHE |ENDCPLB |PORT_PREF0|temp; - SSYNC(); + sync(); + asm(" .align 8; "); + *(unsigned int *)DMEM_CONTROL = + ACACHE_BCACHE | ENDCPLB | PORT_PREF0 | temp; + sync(); sti(); } void dcache_disable(void) { + unsigned int *I0, *I1; + int i; + cli(); - SSYNC(); - *(unsigned int *)DMEM_CONTROL &= ~(ACACHE_BCACHE |ENDCPLB |PORT_PREF0); - SSYNC(); + sync(); + asm(" .align 8; "); + *(unsigned int *)DMEM_CONTROL &= + ~(ACACHE_BCACHE | ENDCPLB | PORT_PREF0); + sync(); sti(); + + /* after disable dcache, + * clear it so we don't confuse the next application + */ + I0 = (unsigned int *)DCPLB_ADDR0; + I1 = (unsigned int *)DCPLB_DATA0; + + for (i = 0; i < 16; i++) { + *I0++ = 0x0; + *I1++ = 0x0; + } } int dcache_status(void) { unsigned int value; value = *(unsigned int *)DMEM_CONTROL; - if( value & (ENDCPLB)) + if (value & (ENDCPLB)) return CACHE_ON; else return CACHE_OFF; diff --git a/cpu/bf533/cpu.h b/cpu/bf533/cpu.h index 7ec3387..821363e 100644 --- a/cpu/bf533/cpu.h +++ b/cpu/bf533/cpu.h @@ -32,8 +32,8 @@ #define DEF_INTERRUPT_FLAGS 1 #define MAX_TIM_LOAD 0xFFFFFFFF -void blackfin_irq_panic(int reason, struct pt_regs * reg); -extern void dump(struct pt_regs * regs); +void blackfin_irq_panic(int reason, struct pt_regs *reg); +extern void dump(struct pt_regs *regs); void display_excp(void); asmlinkage void evt_nmi(void); asmlinkage void evt_exception(void); @@ -50,16 +50,17 @@ asmlinkage void evt_evt12(void); asmlinkage void evt_evt13(void); asmlinkage void evt_soft_int1(void); asmlinkage void evt_system_call(void); -void blackfin_irq_panic(int reason, struct pt_regs * regs); +void blackfin_irq_panic(int reason, struct pt_regs *regs); void blackfin_free_irq(unsigned int irq, void *dev_id); -void call_isr(int irq, struct pt_regs * fp); +void call_isr(int irq, struct pt_regs *fp); void blackfin_do_irq(int vec, struct pt_regs *fp); void blackfin_init_IRQ(void); void blackfin_enable_irq(unsigned int irq); void blackfin_disable_irq(unsigned int irq); -extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); +extern int do_reset(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]); int blackfin_request_irq(unsigned int irq, - void (*handler)(int, void *, struct pt_regs *), - unsigned long flags,const char *devname,void *dev_id); + void (*handler) (int, void *, struct pt_regs *), + unsigned long flags, const char *devname, + void *dev_id); void timer_init(void); #endif diff --git a/cpu/bf533/flush.S b/cpu/bf533/flush.S index 9fbdefc..0512f3b 100644 --- a/cpu/bf533/flush.S +++ b/cpu/bf533/flush.S @@ -3,13 +3,12 @@ * * This file is subject to the terms and conditions of the GNU General Public * License. - * - * Blackfin BF533/2.6 support : LG Soft India */ #define ASSEMBLY #include <asm/linkage.h> #include <asm/cplb.h> +#include <config.h> #include <asm/blackfin.h> .text @@ -20,7 +19,7 @@ * in the instruction cache. */ -ENTRY(flush_instruction_cache) +ENTRY(_flush_instruction_cache) [--SP] = ( R7:6, P5:4 ); LINK 12; SP += -12; @@ -33,7 +32,7 @@ ENTRY(flush_instruction_cache) inext: R0 = [P5++]; R1 = [P4++]; [--SP] = RETS; - CALL icplb_flush; /* R0 = page, R1 = data*/ + CALL _icplb_flush; /* R0 = page, R1 = data*/ RETS = [SP++]; iskip: R6 += -1; CC = R6; @@ -52,7 +51,7 @@ iskip: R6 += -1; */ .align 2 -ENTRY(icplb_flush) +ENTRY(_icplb_flush) [--SP] = ( R7:0, P5:0 ); [--SP] = LC0; [--SP] = LT0; @@ -86,16 +85,17 @@ ENTRY(icplb_flush) */ R3 = ((12<<8)|2); /* Extraction pattern */ - nop; /*Anamoly 05000209*/ - R4 = EXTRACT(R0, R3.L) (Z); /* Extract bits*/ - R3.H = R4.L << 0 ; /* Save in extraction pattern for later deposit.*/ + nop; /* Anamoly 05000209 */ + R4 = EXTRACT(R0, R3.L) (Z); /* Extract bits */ + /* Save in extraction pattern for later deposit. */ + R3.H = R4.L << 0; /* So: * R0 = Page start * R1 = Page length (actually, offset into size/prefix tables) * R3 = sub-bank deposit values - * + * * The cache has 2 Ways, and 64 sets, so we iterate through * the sets, accessing the tag for each Way, for our Bank and * sub-bank, looking for dirty, valid tags that match our @@ -180,8 +180,10 @@ iflush_whole_page: SSYNC; IFLUSH [P0++]; /* because CSYNC can't end loops.*/ LSETUP (isall, ieall) LC0 = P1; -isall:IFLUSH [P0++]; -ieall: NOP; +isall: + IFLUSH [P0++]; +ieall: + NOP; SSYNC; JUMP ifinished; @@ -191,7 +193,7 @@ ieall: NOP; * in the data cache. */ -ENTRY(flush_data_cache) +ENTRY(_flush_data_cache) [--SP] = ( R7:6, P5:4 ); LINK 12; SP += -12; @@ -209,7 +211,7 @@ next: R0 = [P5++]; CC = R2; IF !CC JUMP skip; /* If not, ignore it.*/ [--SP] = RETS; - CALL dcplb_flush; /* R0 = page, R1 = data*/ + CALL _dcplb_flush; /* R0 = page, R1 = data*/ RETS = [SP++]; skip: R6 += -1; CC = R6; @@ -228,7 +230,7 @@ skip: R6 += -1; */ .align 2 -ENTRY(dcplb_flush) +ENTRY(_dcplb_flush) [--SP] = ( R7:0, P5:0 ); [--SP] = LC0; [--SP] = LT0; @@ -290,14 +292,15 @@ bank_chosen: R3 = ((12<<8)|2); /* Extraction pattern */ nop; /*Anamoly 05000209*/ R4 = EXTRACT(R0, R3.L) (Z); /* Extract bits*/ - R3.H = R4.L << 0 ; /* Save in extraction pattern for later deposit.*/ + /* Save in extraction pattern for later deposit.*/ + R3.H = R4.L << 0; /* So: * R0 = Page start * R1 = Page length (actually, offset into size/prefix tables) * R2 = Bank select mask * R3 = sub-bank deposit values - * + * * The cache has 2 Ways, and 64 sets, so we iterate through * the sets, accessing the tag for each Way, for our Bank and * sub-bank, looking for dirty, valid tags that match our @@ -386,7 +389,7 @@ dflush_whole_page: CC = BITTST(R1, 16); /* Whether 1K or 4K*/ IF CC P1 = P2; P1 += -1; /* Unroll one iteration*/ - SSYNC; + SSYNC; FLUSHINV [P0++]; /* because CSYNC can't end loops.*/ LSETUP (eall, eall) LC0 = P1; eall: FLUSHINV [P0++]; diff --git a/cpu/bf533/init_sdram.S b/cpu/bf533/init_sdram.S new file mode 100644 index 0000000..e1a8e2f --- /dev/null +++ b/cpu/bf533/init_sdram.S @@ -0,0 +1,179 @@ +#define ASSEMBLY + +#include <linux/config.h> +#include <config.h> +#include <asm/blackfin.h> +#include <asm/mem_init.h> +.global init_sdram; + +#if (CONFIG_CCLK_DIV == 1) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV1 +#endif +#if (CONFIG_CCLK_DIV == 2) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV2 +#endif +#if (CONFIG_CCLK_DIV == 4) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV4 +#endif +#if (CONFIG_CCLK_DIV == 8) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV8 +#endif +#ifndef CONFIG_CCLK_ACT_DIV +#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly +#endif + +init_sdram: + [--SP] = ASTAT; + [--SP] = RETS; + [--SP] = (R7:0); + [--SP] = (P5:0); + +#if (BFIN_BOOT_MODE == BF533_SPI_BOOT) + p0.h = hi(SPI_BAUD); + p0.l = lo(SPI_BAUD); + r0.l = CONFIG_SPI_BAUD; + w[p0] = r0.l; + SSYNC; +#endif + + /* + * PLL_LOCKCNT - how many SCLK Cycles to delay while PLL becomes stable + */ + p0.h = hi(PLL_LOCKCNT); + p0.l = lo(PLL_LOCKCNT); + r0 = 0x300(Z); + w[p0] = r0.l; + ssync; + + /* + * Put SDRAM in self-refresh, incase anything is running + */ + P2.H = hi(EBIU_SDGCTL); + P2.L = lo(EBIU_SDGCTL); + R0 = [P2]; + BITSET (R0, 24); + [P2] = R0; + SSYNC; + + /* + * Set PLL_CTL with the value that we calculate in R0 + * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors + * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK + * - [7] = output delay (add 200ps of delay to mem signals) + * - [6] = input delay (add 200ps of input delay to mem signals) + * - [5] = PDWN : 1=All Clocks off + * - [3] = STOPCK : 1=Core Clock off + * - [1] = PLL_OFF : 1=Disable Power to PLL + * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL + * all other bits set to zero + */ + + r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */ + r0 = r0 << 9; /* Shift it over, */ + r1 = CONFIG_CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/ + r0 = r1 | r0; + r1 = CONFIG_PLL_BYPASS; /* Bypass the PLL? */ + r1 = r1 << 8; /* Shift it over */ + r0 = r1 | r0; /* add them all together */ + + p0.h = hi(PLL_CTL); + p0.l = lo(PLL_CTL); /* Load the address */ + cli r2; /* Disable interrupts */ + ssync; + w[p0] = r0.l; /* Set the value */ + idle; /* Wait for the PLL to stablize */ + sti r2; /* Enable interrupts */ + +check_again: + p0.h = hi(PLL_STAT); + p0.l = lo(PLL_STAT); + R0 = W[P0](Z); + CC = BITTST(R0,5); + if ! CC jump check_again; + + /* Configure SCLK & CCLK Dividers */ + r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); + p0.h = hi(PLL_DIV); + p0.l = lo(PLL_DIV); + w[p0] = r0.l; + ssync; + + /* + * We now are running at speed, time to set the Async mem bank wait states + * This will speed up execution, since we are normally running from FLASH. + */ + + p2.h = (EBIU_AMBCTL1 >> 16); + p2.l = (EBIU_AMBCTL1 & 0xFFFF); + r0.h = (AMBCTL1VAL >> 16); + r0.l = (AMBCTL1VAL & 0xFFFF); + [p2] = r0; + ssync; + + p2.h = (EBIU_AMBCTL0 >> 16); + p2.l = (EBIU_AMBCTL0 & 0xFFFF); + r0.h = (AMBCTL0VAL >> 16); + r0.l = (AMBCTL0VAL & 0xFFFF); + [p2] = r0; + ssync; + + p2.h = (EBIU_AMGCTL >> 16); + p2.l = (EBIU_AMGCTL & 0xffff); + r0 = AMGCTLVAL; + w[p2] = r0; + ssync; + + /* + * Now, Initialize the SDRAM, + * start with the SDRAM Refresh Rate Control Register + */ + p0.l = lo(EBIU_SDRRC); + p0.h = hi(EBIU_SDRRC); + r0 = mem_SDRRC; + w[p0] = r0.l; + ssync; + + /* + * SDRAM Memory Bank Control Register - bank specific parameters + */ + p0.l = (EBIU_SDBCTL & 0xFFFF); + p0.h = (EBIU_SDBCTL >> 16); + r0 = mem_SDBCTL; + w[p0] = r0.l; + ssync; + + /* + * SDRAM Global Control Register - global programmable parameters + * Disable self-refresh + */ + P2.H = hi(EBIU_SDGCTL); + P2.L = lo(EBIU_SDGCTL); + R0 = [P2]; + BITCLR (R0, 24); + + /* + * Check if SDRAM is already powered up, if it is, enable self-refresh + */ + p0.h = hi(EBIU_SDSTAT); + p0.l = lo(EBIU_SDSTAT); + r2.l = w[p0]; + cc = bittst(r2,3); + if !cc jump skip; + NOP; + BITSET (R0, 23); +skip: + [P2] = R0; + SSYNC; + + /* Write in the new value in the register */ + R0.L = lo(mem_SDGCTL); + R0.H = hi(mem_SDGCTL); + [P2] = R0; + SSYNC; + nop; + + (P5:0) = [SP++]; + (R7:0) = [SP++]; + RETS = [SP++]; + ASTAT = [SP++]; + RTS; diff --git a/cpu/bf533/init_sdram_bootrom_initblock.S b/cpu/bf533/init_sdram_bootrom_initblock.S new file mode 100644 index 0000000..99ed920 --- /dev/null +++ b/cpu/bf533/init_sdram_bootrom_initblock.S @@ -0,0 +1,179 @@ +#define ASSEMBLY + +#include <linux/config.h> +#include <config.h> +#include <asm/blackfin.h> +#include <asm/mem_init.h> +.global init_sdram; + +#if (CONFIG_CCLK_DIV == 1) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV1 +#endif +#if (CONFIG_CCLK_DIV == 2) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV2 +#endif +#if (CONFIG_CCLK_DIV == 4) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV4 +#endif +#if (CONFIG_CCLK_DIV == 8) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV8 +#endif +#ifndef CONFIG_CCLK_ACT_DIV +#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly +#endif + +init_sdram: + [--SP] = ASTAT; + [--SP] = RETS; + [--SP] = (R7:0); + [--SP] = (P5:0); + +#if (BFIN_BOOT_MODE == BF533_SPI_BOOT) + p0.h = hi(SPI_BAUD); + p0.l = lo(SPI_BAUD); + r0.l = CONFIG_SPI_BAUD_INITBLOCK; + w[p0] = r0.l; + SSYNC; +#endif + + /* + * PLL_LOCKCNT - how many SCLK Cycles to delay while PLL becomes stable + */ + p0.h = hi(PLL_LOCKCNT); + p0.l = lo(PLL_LOCKCNT); + r0 = 0x300(Z); + w[p0] = r0.l; + ssync; + + /* + * Put SDRAM in self-refresh, incase anything is running + */ + P2.H = hi(EBIU_SDGCTL); + P2.L = lo(EBIU_SDGCTL); + R0 = [P2]; + BITSET (R0, 24); + [P2] = R0; + SSYNC; + + /* + * Set PLL_CTL with the value that we calculate in R0 + * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors + * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK + * - [7] = output delay (add 200ps of delay to mem signals) + * - [6] = input delay (add 200ps of input delay to mem signals) + * - [5] = PDWN : 1=All Clocks off + * - [3] = STOPCK : 1=Core Clock off + * - [1] = PLL_OFF : 1=Disable Power to PLL + * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL + * all other bits set to zero + */ + + r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */ + r0 = r0 << 9; /* Shift it over, */ + r1 = CONFIG_CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/ + r0 = r1 | r0; + r1 = CONFIG_PLL_BYPASS; /* Bypass the PLL? */ + r1 = r1 << 8; /* Shift it over */ + r0 = r1 | r0; /* add them all together */ + + p0.h = hi(PLL_CTL); + p0.l = lo(PLL_CTL); /* Load the address */ + cli r2; /* Disable interrupts */ + ssync; + w[p0] = r0.l; /* Set the value */ + idle; /* Wait for the PLL to stablize */ + sti r2; /* Enable interrupts */ + +check_again: + p0.h = hi(PLL_STAT); + p0.l = lo(PLL_STAT); + R0 = W[P0](Z); + CC = BITTST(R0,5); + if ! CC jump check_again; + + /* Configure SCLK & CCLK Dividers */ + r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); + p0.h = hi(PLL_DIV); + p0.l = lo(PLL_DIV); + w[p0] = r0.l; + ssync; + + /* + * We now are running at speed, time to set the Async mem bank wait states + * This will speed up execution, since we are normally running from FLASH. + */ + + p2.h = (EBIU_AMBCTL1 >> 16); + p2.l = (EBIU_AMBCTL1 & 0xFFFF); + r0.h = (AMBCTL1VAL >> 16); + r0.l = (AMBCTL1VAL & 0xFFFF); + [p2] = r0; + ssync; + + p2.h = (EBIU_AMBCTL0 >> 16); + p2.l = (EBIU_AMBCTL0 & 0xFFFF); + r0.h = (AMBCTL0VAL >> 16); + r0.l = (AMBCTL0VAL & 0xFFFF); + [p2] = r0; + ssync; + + p2.h = (EBIU_AMGCTL >> 16); + p2.l = (EBIU_AMGCTL & 0xffff); + r0 = AMGCTLVAL; + w[p2] = r0; + ssync; + + /* + * Now, Initialize the SDRAM, + * start with the SDRAM Refresh Rate Control Register + */ + p0.l = lo(EBIU_SDRRC); + p0.h = hi(EBIU_SDRRC); + r0 = mem_SDRRC; + w[p0] = r0.l; + ssync; + + /* + * SDRAM Memory Bank Control Register - bank specific parameters + */ + p0.l = (EBIU_SDBCTL & 0xFFFF); + p0.h = (EBIU_SDBCTL >> 16); + r0 = mem_SDBCTL; + w[p0] = r0.l; + ssync; + + /* + * SDRAM Global Control Register - global programmable parameters + * Disable self-refresh + */ + P2.H = hi(EBIU_SDGCTL); + P2.L = lo(EBIU_SDGCTL); + R0 = [P2]; + BITCLR (R0, 24); + + /* + * Check if SDRAM is already powered up, if it is, enable self-refresh + */ + p0.h = hi(EBIU_SDSTAT); + p0.l = lo(EBIU_SDSTAT); + r2.l = w[p0]; + cc = bittst(r2,3); + if !cc jump skip; + NOP; + BITSET (R0, 23); +skip: + [P2] = R0; + SSYNC; + + /* Write in the new value in the register */ + R0.L = lo(mem_SDGCTL); + R0.H = hi(mem_SDGCTL); + [P2] = R0; + SSYNC; + nop; + + (P5:0) = [SP++]; + (R7:0) = [SP++]; + RETS = [SP++]; + ASTAT = [SP++]; + RTS; diff --git a/cpu/bf533/interrupt.S b/cpu/bf533/interrupt.S index e780dc6..524da8f 100644 --- a/cpu/bf533/interrupt.S +++ b/cpu/bf533/interrupt.S @@ -40,203 +40,58 @@ */ #define ASSEMBLY - +#include <config.h> +#include <asm/blackfin.h> #include <asm/hw_irq.h> #include <asm/entry.h> #include <asm/blackfin_defs.h> -#include <asm/cpu/bf533_irq.h> -.global blackfin_irq_panic; +.global _blackfin_irq_panic; .text .align 2 #ifndef CONFIG_KGDB -.global evt_emulation -evt_emulation: +.global _evt_emulation +_evt_emulation: SAVE_CONTEXT r0 = IRQ_EMU; r1 = seqstat; sp += -12; - call blackfin_irq_panic; + call _blackfin_irq_panic; sp += 12; rte; #endif -.global evt_nmi -evt_nmi: +.global _evt_nmi +_evt_nmi: SAVE_CONTEXT r0 = IRQ_NMI; r1 = RETN; sp += -12; - call blackfin_irq_panic; + call _blackfin_irq_panic; sp += 12; _evt_nmi_exit: rtn; -.global trap -trap: - [--sp] = r0; - [--sp] = r1; - [--sp] = p0; - [--sp] = p1; - [--sp] = astat; - r0 = seqstat; - R0 <<= 26; - R0 >>= 26; - p0 = r0; - p1.l = EVTABLE; - p1.h = EVTABLE; - p0 = p1 + (p0 << 1); - r1 = W[p0] (Z); - p1 = r1; - jump (pc + p1); - -.global _EVENT1 -_EVENT1: - RAISE 14; - JUMP.S _EXIT; - -.global _EVENT2 -_EVENT2: - RAISE 14; - JUMP.S _EXIT; - -.global _EVENT3 -_EVENT3: - RAISE 14; - JUMP.S _EXIT; - -.global _EVENT4 -_EVENT4: - RAISE 14; - JUMP.S _EXIT; - -.global _EVENT5 -_EVENT5: - RAISE 14; - JUMP.S _EXIT; - -.global _EVENT6 -_EVENT6: - RAISE 14; - JUMP.S _EXIT; - -.global _EVENT7 -_EVENT7: - RAISE 15; - JUMP.S _EXIT; - -.global _EVENT8 -_EVENT8: - RAISE 14; - JUMP.S _EXIT; - -.global _EVENT9 -_EVENT9: - RAISE 14; - JUMP.S _EXIT; - -.global _EVENT10 -_EVENT10: - RAISE 14; - JUMP.S _EXIT; - -.global _EVENT11 -_EVENT11: - RAISE 14; - JUMP.S _EXIT; - -.global _EVENT12 -_EVENT12: - RAISE 14; - JUMP.S _EXIT; - -.global _EVENT13 -_EVENT13: - RAISE 14; - JUMP.S _EXIT; - -.global _EVENT14 -_EVENT14: -/* RAISE 14; */ - CALL _cplb_hdr; - JUMP.S _EXIT; - -.global _EVENT19 -_EVENT19: - RAISE 14; - JUMP.S _EXIT; - -.global _EVENT20 -_EVENT20: - RAISE 14; - JUMP.S _EXIT; - -.global _EVENT21 -_EVENT21: - RAISE 14; - JUMP.S _EXIT; - -.global _EXIT -_EXIT: - ASTAT = [sp++]; - p1 = [sp++]; - p0 = [sp++]; - r1 = [sp++]; - r0 = [sp++]; - RTX; - -EVTABLE: - .byte2 0x0000; - .byte2 0x0000; - .byte2 0x0000; - .byte2 0x0000; - .byte2 0x0000; - .byte2 0x0000; - .byte2 0x0000; - .byte2 0x0000; - .byte2 0x0000; - .byte2 0x0000; - .byte2 0x0000; - .byte2 0x0000; - .byte2 0x0000; - .byte2 0x0000; - .byte2 0x0000; - .byte2 0x0000; - .byte2 0x003E; - .byte2 0x0042; - .byte4 0x0000; - .byte4 0x0000; - .byte4 0x0000; - .byte4 0x0000; - .byte4 0x0000; - .byte4 0x0000; - .byte4 0x0000; - .byte2 0x0000; - .byte2 0x001E; - .byte2 0x0022; - .byte2 0x0032; - .byte2 0x002e; - .byte2 0x0002; - .byte2 0x0036; - .byte2 0x002A; - .byte2 0x001A; - .byte2 0x0016; - .byte2 0x000A; - .byte2 0x000E; - .byte2 0x0012; - .byte2 0x0006; - .byte2 0x0026; +.global _trap +_trap: + SAVE_ALL_SYS + r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */ + sp += -12; + call _trap_c + sp += 12; + RESTORE_ALL_SYS + rtx; -.global evt_rst -evt_rst: +.global _evt_rst +_evt_rst: SAVE_CONTEXT r0 = IRQ_RST; r1 = RETN; sp += -12; - call do_reset; + call _do_reset; sp += 12; _evt_rst_exit: @@ -246,19 +101,19 @@ irq_panic: r0 = IRQ_EVX; r1 = sp; sp += -12; - call blackfin_irq_panic; + call _blackfin_irq_panic; sp += 12; -.global evt_ivhw -evt_ivhw: +.global _evt_ivhw +_evt_ivhw: SAVE_CONTEXT RAISE 14; _evt_ivhw_exit: rti; -.global evt_timer -evt_timer: +.global _evt_timer +_evt_timer: SAVE_CONTEXT r0 = IRQ_CORETMR; sp += -12; @@ -269,91 +124,91 @@ evt_timer: rti; nop; -.global evt_evt7 -evt_evt7: +.global _evt_evt7 +_evt_evt7: SAVE_CONTEXT r0 = 7; sp += -12; - call process_int; + call _process_int; sp += 12; evt_evt7_exit: RESTORE_CONTEXT rti; -.global evt_evt8 -evt_evt8: +.global _evt_evt8 +_evt_evt8: SAVE_CONTEXT r0 = 8; sp += -12; - call process_int; + call _process_int; sp += 12; evt_evt8_exit: RESTORE_CONTEXT rti; -.global evt_evt9 -evt_evt9: +.global _evt_evt9 +_evt_evt9: SAVE_CONTEXT r0 = 9; sp += -12; - call process_int; + call _process_int; sp += 12; evt_evt9_exit: RESTORE_CONTEXT rti; -.global evt_evt10 -evt_evt10: +.global _evt_evt10 +_evt_evt10: SAVE_CONTEXT r0 = 10; sp += -12; - call process_int; + call _process_int; sp += 12; evt_evt10_exit: RESTORE_CONTEXT rti; -.global evt_evt11 -evt_evt11: +.global _evt_evt11 +_evt_evt11: SAVE_CONTEXT r0 = 11; sp += -12; - call process_int; + call _process_int; sp += 12; evt_evt11_exit: RESTORE_CONTEXT rti; -.global evt_evt12 -evt_evt12: +.global _evt_evt12 +_evt_evt12: SAVE_CONTEXT r0 = 12; sp += -12; - call process_int; + call _process_int; sp += 12; evt_evt12_exit: RESTORE_CONTEXT rti; -.global evt_evt13 -evt_evt13: +.global _evt_evt13 +_evt_evt13: SAVE_CONTEXT r0 = 13; sp += -12; - call process_int; + call _process_int; sp += 12; evt_evt13_exit: RESTORE_CONTEXT rti; -.global evt_system_call -evt_system_call: +.global _evt_system_call +_evt_system_call: [--sp] = r0; [--SP] = RETI; r0 = [sp++]; @@ -363,7 +218,7 @@ evt_system_call: r0 = [SP++]; SAVE_CONTEXT sp += -12; - call display_excp; + call _exception_handle; sp += 12; RESTORE_CONTEXT RTI; @@ -371,8 +226,8 @@ evt_system_call: evt_system_call_exit: rti; -.global evt_soft_int1 -evt_soft_int1: +.global _evt_soft_int1 +_evt_soft_int1: [--sp] = r0; [--SP] = RETI; r0 = [sp++]; @@ -382,7 +237,7 @@ evt_soft_int1: r0 = [SP++]; SAVE_CONTEXT sp += -12; - call display_excp; + call _exception_handle; sp += 12; RESTORE_CONTEXT RTI; diff --git a/cpu/bf533/interrupts.c b/cpu/bf533/interrupts.c index df1a25e..9317f26 100644 --- a/cpu/bf533/interrupts.c +++ b/cpu/bf533/interrupts.c @@ -10,7 +10,7 @@ * Copyright 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca> * Copyright 2003 Metrowerks/Motorola * Copyright 2003 Bas Vermeulen <bas@buyways.nl>, - * BuyWays B.V. (www.buyways.nl) + * BuyWays B.V. (www.buyways.nl) * * (C) Copyright 2000-2004 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. @@ -37,14 +37,15 @@ #include <common.h> #include <asm/machdep.h> #include <asm/irq.h> -#include <asm/cpu/defBF533.h> +#include <config.h> +#include <asm/blackfin.h> #include "cpu.h" static ulong timestamp; static ulong last_time; static int int_flag; -int irq_flags; /* needed by asm-blackfin/system.h */ +int irq_flags; /* needed by asm-blackfin/system.h */ /* Functions just to satisfy the linker */ @@ -61,7 +62,7 @@ unsigned long long get_ticks(void) * This function is derived from PowerPC code (timebase clock frequency). * On BF533 it returns the number of timer ticks per second. */ -ulong get_tbclk (void) +ulong get_tbclk(void) { ulong tbclk; @@ -91,22 +92,22 @@ void udelay(unsigned long usec) unsigned long cclk; cclk = (CONFIG_CCLK_HZ); - while ( usec > 1 ) { - /* - * how many clock ticks to delay? - * - request(in useconds) * clock_ticks(Hz) / useconds/second - */ + while (usec > 1) { + /* + * how many clock ticks to delay? + * - request(in useconds) * clock_ticks(Hz) / useconds/second + */ if (usec < 1000) { - delay = (usec * (cclk/244)) >> 12 ; + delay = (usec * (cclk / 244)) >> 12; usec = 0; } else { - delay = (1000 * (cclk/244)) >> 12 ; + delay = (1000 * (cclk / 244)) >> 12; usec -= 1000; } - asm volatile (" %0 = CYCLES;": "=g"(start)); + asm volatile (" %0 = CYCLES;":"=r" (start)); do { - asm volatile (" %0 = CYCLES; ": "=g"(stop)); + asm volatile (" %0 = CYCLES; ":"=r" (stop)); } while (stop - start < delay); } @@ -117,7 +118,7 @@ void timer_init(void) { *pTCNTL = 0x1; *pTSCALE = 0x0; - *pTCOUNT = MAX_TIM_LOAD; + *pTCOUNT = MAX_TIM_LOAD; *pTPERIOD = MAX_TIM_LOAD; *pTCNTL = 0x7; asm("CSYNC;"); @@ -146,20 +147,23 @@ ulong get_timer(ulong base) /* Number of clocks elapsed */ ulong clocks = (MAX_TIM_LOAD - (*pTCOUNT)); - /* Find if the TCOUNT is reset - timestamp gives the number of times - TCOUNT got reset */ - if(clocks < last_time) + /** + * Find if the TCOUNT is reset + * timestamp gives the number of times + * TCOUNT got reset + */ + if (clocks < last_time) timestamp++; last_time = clocks; /* Get the number of milliseconds */ - milisec = clocks/(CONFIG_CCLK_HZ / 1000); + milisec = clocks / (CONFIG_CCLK_HZ / 1000); - /* Find the number of millisonds - that got elapsed before this TCOUNT - cycle */ - milisec += timestamp * (MAX_TIM_LOAD/(CONFIG_CCLK_HZ / 1000)); + /** + * Find the number of millisonds + * that got elapsed before this TCOUNT cycle + */ + milisec += timestamp * (MAX_TIM_LOAD / (CONFIG_CCLK_HZ / 1000)); return (milisec - base); } diff --git a/cpu/bf533/ints.c b/cpu/bf533/ints.c index 859f4b2..f476f14 100644 --- a/cpu/bf533/ints.c +++ b/cpu/bf533/ints.c @@ -51,9 +51,9 @@ void blackfin_irq_panic(int reason, struct pt_regs *regs) { printf("\n\nException: IRQ 0x%x entered\n", reason); - printf("code=[0x%x], ", (unsigned int) (regs->seqstat & 0x3f)); - printf("stack frame=0x%x, ", (unsigned int) regs); - printf("bad PC=0x%04x\n", (unsigned int) regs->pc); + printf("code=[0x%x], ", (unsigned int)(regs->seqstat & 0x3f)); + printf("stack frame=0x%x, ", (unsigned int)regs); + printf("bad PC=0x%04x\n", (unsigned int)regs->pc); dump(regs); printf("Unhandled IRQ or exceptions!\n"); printf("Please reset the board \n"); @@ -61,46 +61,56 @@ void blackfin_irq_panic(int reason, struct pt_regs *regs) void blackfin_init_IRQ(void) { - *(unsigned volatile long *) (SIC_IMASK) = SIC_UNMASK_ALL; + *(unsigned volatile long *)(SIC_IMASK) = SIC_UNMASK_ALL; cli(); #ifndef CONFIG_KGDB - *(unsigned volatile long *) (EVT_EMULATION_ADDR) = 0x0; + *(unsigned volatile long *)(EVT_EMULATION_ADDR) = 0x0; #endif - *(unsigned volatile long *) (EVT_NMI_ADDR) = - (unsigned volatile long) evt_nmi; - *(unsigned volatile long *) (EVT_EXCEPTION_ADDR) = - (unsigned volatile long) trap; - *(unsigned volatile long *) (EVT_HARDWARE_ERROR_ADDR) = - (unsigned volatile long) evt_ivhw; - *(unsigned volatile long *) (EVT_RESET_ADDR) = - (unsigned volatile long) evt_rst; - *(unsigned volatile long *) (EVT_TIMER_ADDR) = - (unsigned volatile long) evt_timer; - *(unsigned volatile long *) (EVT_IVG7_ADDR) = - (unsigned volatile long) evt_evt7; - *(unsigned volatile long *) (EVT_IVG8_ADDR) = - (unsigned volatile long) evt_evt8; - *(unsigned volatile long *) (EVT_IVG9_ADDR) = - (unsigned volatile long) evt_evt9; - *(unsigned volatile long *) (EVT_IVG10_ADDR) = - (unsigned volatile long) evt_evt10; - *(unsigned volatile long *) (EVT_IVG11_ADDR) = - (unsigned volatile long) evt_evt11; - *(unsigned volatile long *) (EVT_IVG12_ADDR) = - (unsigned volatile long) evt_evt12; - *(unsigned volatile long *) (EVT_IVG13_ADDR) = - (unsigned volatile long) evt_evt13; - *(unsigned volatile long *) (EVT_IVG14_ADDR) = - (unsigned volatile long) evt_system_call; - *(unsigned volatile long *) (EVT_IVG15_ADDR) = - (unsigned volatile long) evt_soft_int1; - *(volatile unsigned long *) ILAT = 0; + *(unsigned volatile long *)(EVT_NMI_ADDR) = + (unsigned volatile long)evt_nmi; + *(unsigned volatile long *)(EVT_EXCEPTION_ADDR) = + (unsigned volatile long)trap; + *(unsigned volatile long *)(EVT_HARDWARE_ERROR_ADDR) = + (unsigned volatile long)evt_ivhw; + *(unsigned volatile long *)(EVT_RESET_ADDR) = + (unsigned volatile long)evt_rst; + *(unsigned volatile long *)(EVT_TIMER_ADDR) = + (unsigned volatile long)evt_timer; + *(unsigned volatile long *)(EVT_IVG7_ADDR) = + (unsigned volatile long)evt_evt7; + *(unsigned volatile long *)(EVT_IVG8_ADDR) = + (unsigned volatile long)evt_evt8; + *(unsigned volatile long *)(EVT_IVG9_ADDR) = + (unsigned volatile long)evt_evt9; + *(unsigned volatile long *)(EVT_IVG10_ADDR) = + (unsigned volatile long)evt_evt10; + *(unsigned volatile long *)(EVT_IVG11_ADDR) = + (unsigned volatile long)evt_evt11; + *(unsigned volatile long *)(EVT_IVG12_ADDR) = + (unsigned volatile long)evt_evt12; + *(unsigned volatile long *)(EVT_IVG13_ADDR) = + (unsigned volatile long)evt_evt13; + *(unsigned volatile long *)(EVT_IVG14_ADDR) = + (unsigned volatile long)evt_system_call; + *(unsigned volatile long *)(EVT_IVG15_ADDR) = + (unsigned volatile long)evt_soft_int1; + *(volatile unsigned long *)ILAT = 0; asm("csync;"); sti(); - *(volatile unsigned long *) IMASK = 0xffbf; + *(volatile unsigned long *)IMASK = 0xffbf; asm("csync;"); } +void exception_handle(void) +{ +#if defined (CONFIG_PANIC_HANG) + display_excp(); +#else + udelay(100000); /* allow messages to go out */ + do_reset(NULL, 0, 0, NULL); +#endif +} + void display_excp(void) { printf("Exception!\n"); diff --git a/cpu/bf533/serial.c b/cpu/bf533/serial.c index 7b43ffd..11a46be 100644 --- a/cpu/bf533/serial.c +++ b/cpu/bf533/serial.c @@ -49,6 +49,7 @@ #include <asm/bitops.h> #include <asm/delay.h> #include <asm/uaccess.h> +#include <asm/io.h> #include "bf533_serial.h" DECLARE_GLOBAL_DATA_PTR; @@ -58,15 +59,16 @@ unsigned long pll_div_fact; void calc_baud(void) { unsigned char i; - int temp; + int temp; + u_long sclk = get_sclk(); - for(i = 0; i < sizeof(baud_table)/sizeof(int); i++) { - temp = CONFIG_SCLK_HZ/(baud_table[i]*8); - if ( temp && 0x1 == 1 ) { + for (i = 0; i < sizeof(baud_table) / sizeof(int); i++) { + temp = sclk / (baud_table[i] * 8); + if ((temp & 0x1) == 1) { temp++; } - temp = temp/2; - hw_baud_table[i].dl_high = (temp >> 8)& 0xFF; + temp = temp / 2; + hw_baud_table[i].dl_high = (temp >> 8) & 0xFF; hw_baud_table[i].dl_low = (temp) & 0xFF; } } @@ -74,6 +76,7 @@ void calc_baud(void) void serial_setbrg(void) { int i; + DECLARE_GLOBAL_DATA_PTR; calc_baud(); @@ -84,29 +87,29 @@ void serial_setbrg(void) /* Enable UART */ *pUART_GCTL |= UART_GCTL_UCEN; - asm("ssync;"); + sync(); /* Set DLAB in LCR to Access DLL and DLH */ ACCESS_LATCH; - asm("ssync;"); + sync(); *pUART_DLL = hw_baud_table[i].dl_low; - asm("ssync;"); + sync(); *pUART_DLH = hw_baud_table[i].dl_high; - asm("ssync;"); + sync(); /* Clear DLAB in LCR to Access THR RBR IER */ ACCESS_PORT_IER; - asm("ssync;"); + sync(); /* Enable ERBFI and ELSI interrupts - * to poll SIC_ISR register*/ + * to poll SIC_ISR register*/ *pUART_IER = UART_IER_ELSI | UART_IER_ERBFI | UART_IER_ETBEI; - asm("ssync;"); + sync(); /* Set LCR to Word Lengh 8-bit word select */ *pUART_LCR = UART_LCR_WLS8; - asm("ssync;"); + sync(); return; } @@ -119,8 +122,7 @@ int serial_init(void) void serial_putc(const char c) { - if ((*pUART_LSR) & UART_LSR_TEMT) - { + if ((*pUART_LSR) & UART_LSR_TEMT) { if (c == '\n') serial_putc('\r'); @@ -148,17 +150,16 @@ int serial_getc(void) int ret; /* Poll for RX Interrupt */ - while (!((isr_val = *(volatile unsigned long *)SIC_ISR) & IRQ_UART_RX_BIT)); + while (!((isr_val = + *(volatile unsigned long *)SIC_ISR) & IRQ_UART_RX_BIT)) ; asm("csync;"); uart_lsr_val = *pUART_LSR; /* Clear status bit */ uart_rbr_val = *pUART_RBR; /* getc() */ if (isr_val & IRQ_UART_ERROR_BIT) { - ret = -1; - } - else - { + ret = -1; + } else { ret = uart_rbr_val & 0xff; } @@ -180,10 +181,10 @@ static void local_put_char(char ch) save_and_cli(flags); /* Poll for TX Interruput */ - while (!((isr_val = *pSIC_ISR) & IRQ_UART_TX_BIT)); + while (!((isr_val = *pSIC_ISR) & IRQ_UART_TX_BIT)) ; asm("csync;"); - *pUART_THR = ch; /* putc() */ + *pUART_THR = ch; /* putc() */ if (isr_val & IRQ_UART_ERROR_BIT) { printf("?"); @@ -191,5 +192,5 @@ static void local_put_char(char ch) restore_flags(flags); - return ; + return; } diff --git a/cpu/bf533/start.S b/cpu/bf533/start.S index 6d58575..94556d6 100644 --- a/cpu/bf533/start.S +++ b/cpu/bf533/start.S @@ -1,5 +1,5 @@ /* - * U-boot - start.S Startup file of u-boot for BF533 + * U-boot - start.S Startup file of u-boot for BF533/BF561 * * Copyright (c) 2005 blackfin.uclinux.org * @@ -38,9 +38,23 @@ #define ASSEMBLY #include <linux/config.h> -#include <asm/blackfin.h> #include <config.h> -#include <asm/mem_init.h> +#include <asm/blackfin.h> + +.global _stext; +.global __bss_start; +.global start; +.global _start; +.global _rambase; +.global _ramstart; +.global _ramend; +.global _bf533_data_dest; +.global _bf533_data_size; +.global edata; +.global _initialize; +.global _exit; +.global flashdataend; +.global init_sdram; #if (CONFIG_CCLK_DIV == 1) #define CONFIG_CCLK_ACT_DIV CCLK_DIV1 @@ -58,26 +72,12 @@ #define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly #endif -.global _stext; -.global __bss_start; -.global start; -.global _start; -.global _rambase; -.global _ramstart; -.global _ramend; -.global _bf533_data_dest; -.global _bf533_data_size; -.global edata; -.global _initialize; -.global _exit; -.global flashdataend; - .text _start: start: _stext: - R0 = 0x30; + R0 = 0x32; SYSCFG = R0; SSYNC; @@ -120,8 +120,9 @@ _stext: /* Set loop counters to zero, to make sure that * hw loops are disabled. */ - lc0 = 0; - lc1 = 0; + r0 = 0; + lc0 = r0; + lc1 = r0; SSYNC; @@ -150,105 +151,40 @@ no_soft_reset: LSETUP(4,4) lc0 = p1; [ p0 ++ ] = r1; - /* - * Set PLL_CTL - * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors - * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK - * - [7] = output delay (add 200ps of delay to mem signals) - * - [6] = input delay (add 200ps of input delay to mem signals) - * - [5] = PDWN : 1=All Clocks off - * - [3] = STOPCK : 1=Core Clock off - * - [1] = PLL_OFF : 1=Disable Power to PLL - * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL - * all other bits set to zero - */ - - r0 = CONFIG_VCO_MULT; /* Load the VCO multiplier */ - r0 = r0 << 9; /* Shift it over */ - r1 = CONFIG_CLKIN_HALF; /* Do we need to divide CLKIN by 2? */ - r0 = r1 | r0; - r1 = CONFIG_PLL_BYPASS; /* Bypass the PLL? */ - r1 = r1 << 8; /* Shift it over */ - r0 = r1 | r0; /* add them all together */ - - p0.h = (PLL_CTL >> 16); - p0.l = (PLL_CTL & 0xFFFF); /* Load the address */ - cli r2; /* Disable interrupts */ - w[p0] = r0; /* Set the value */ - idle; /* Wait for the PLL to stablize */ - sti r2; /* Enable interrupts */ - ssync; - - /* - * Turn on the CYCLES COUNTER - */ - r2 = SYSCFG; - BITSET (r2,1); - SYSCFG = r2; - - /* Configure SCLK & CCLK Dividers */ - r0 = CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV; - p0.h = (PLL_DIV >> 16); - p0.l = (PLL_DIV & 0xFFFF); - w[p0] = r0; - ssync; - -wait_for_pll_stab: - p0.h = (PLL_STAT >> 16); - p0.l = (PLL_STAT & 0xFFFF); - r0.l = w[p0]; - cc = bittst(r0,5); - if !cc jump wait_for_pll_stab; - - /* Configure SDRAM if SDRAM is already not enabled */ - p0.l = (EBIU_SDSTAT & 0xFFFF); - p0.h = (EBIU_SDSTAT >> 16); - r0.l = w[p0]; - cc = bittst(r0, 3); - if !cc jump skip_sdram_enable; - - /* SDRAM initialization */ - p0.l = (EBIU_SDGCTL & 0xFFFF); - p0.h = (EBIU_SDGCTL >> 16); /* SDRAM Memory Global Control Register */ - r0.h = (mem_SDGCTL >> 16); - r0.l = (mem_SDGCTL & 0xFFFF); - [p0] = r0; - ssync; - - p0.l = (EBIU_SDBCTL & 0xFFFF); - p0.h = (EBIU_SDBCTL >> 16); /* SDRAM Memory Bank Control Register */ - r0 = mem_SDBCTL; + p0.h = hi(SIC_IWR); + p0.l = lo(SIC_IWR); + r0.l = 0x1; w[p0] = r0.l; - ssync; + SSYNC; - p0.l = (EBIU_SDRRC & 0xFFFF); - p0.h = (EBIU_SDRRC >> 16); /* SDRAM Refresh Rate Control Register */ - r0 = mem_SDRRC; - w[p0] = r0.l; - ssync; + sp.l = (0xffb01000 & 0xFFFF); + sp.h = (0xffb01000 >> 16); -skip_sdram_enable: - nop; + call init_sdram; -#ifndef CFG_NO_FLASH /* relocate into to RAM */ - p1.l = (CFG_FLASH_BASE & 0xffff); - p1.h = (CFG_FLASH_BASE >> 16); + call get_pc; +offset: + r2.l = offset; + r2.h = offset; + r3.l = start; + r3.h = start; + r1 = r2 - r3; + + r0 = r0 - r1; + p1 = r0; + p2.l = (CFG_MONITOR_BASE & 0xffff); p2.h = (CFG_MONITOR_BASE >> 16); - r0.l = (CFG_MONITOR_LEN & 0xffff); - r0.h = (CFG_MONITOR_LEN >> 16); + + p3 = 0x04; + p4.l = ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) & 0xffff); + p4.h = ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) >> 16); loop1: - r1 = [p1]; - [p2] = r1; - p3=0x4; - p1=p1+p3; - p2=p2+p3; - r2=0x4; - r0=r0-r2; - cc=r0==0x0; + r1 = [p1 ++ p3]; + [p2 ++ p3] = r1; + cc=p2==p4; if !cc jump loop1; -#endif /* * configure STACK */ @@ -273,7 +209,8 @@ loop1: p0.l = (IMASK & 0xFFFF); p0.h = (IMASK >> 16); - r0 = IVG15_POS; + r0.l = LO(IVG15_POS); + r0.h = HI(IVG15_POS); [p0] = r0; raise 15; p0.l = WAIT_HERE; @@ -288,37 +225,10 @@ WAIT_HERE: _real_start: [ -- sp ] = reti; -#ifdef CONFIG_EZKIT533 - p0.l = (WDOG_CTL & 0xFFFF); - p0.h = (WDOG_CTL >> 16); - r0 = WATCHDOG_DISABLE(z); - w[p0] = r0; -#endif - - /* Code for initializing Async mem banks */ - p2.h = (EBIU_AMBCTL1 >> 16); - p2.l = (EBIU_AMBCTL1 & 0xFFFF); - r0.h = (AMBCTL1VAL >> 16); - r0.l = (AMBCTL1VAL & 0xFFFF); - [p2] = r0; - ssync; - - p2.h = (EBIU_AMBCTL0 >> 16); - p2.l = (EBIU_AMBCTL0 & 0xFFFF); - r0.h = (AMBCTL0VAL >> 16); - r0.l = (AMBCTL0VAL & 0xFFFF); - [p2] = r0; - ssync; - - p2.h = (EBIU_AMGCTL >> 16); - p2.l = (EBIU_AMGCTL & 0xffff); - r0 = AMGCTLVAL; - w[p2] = r0; - ssync; - /* DMA reset code to Hi of L1 SRAM */ copy: - P1.H = hi(SYSMMR_BASE); /* P1 Points to the beginning of SYSTEM MMR Space */ + /* P1 Points to the beginning of SYSTEM MMR Space */ + P1.H = hi(SYSMMR_BASE); P1.L = lo(SYSMMR_BASE); R0.H = reset_start; /* Source Address (high) */ @@ -329,7 +239,8 @@ copy: R1.H = hi(L1_ISRAM); /* Destination Address (high) */ R1.L = lo(L1_ISRAM); /* Destination Address (low) */ R3.L = DMAEN; /* Source DMAConfig Value (8-bit words) */ - R4.L = (DI_EN | WNR | DMAEN); /* Destination DMAConfig Value (8-bit words) */ + /* Destination DMAConfig Value (8-bit words) */ + R4.L = (DI_EN | WNR | DMAEN); DMA: R6 = 0x1 (Z); @@ -342,57 +253,24 @@ DMA: Memory Read, 8-Bit Transfers, 1-D DMA, Flow - Stop */ W[P1+OFFSET_(MDMA_S0_CONFIG)] = R3; - [P1+OFFSET_(MDMA_D0_START_ADDR)] = R1; /* Set Destination Base Address */ - W[P1+OFFSET_(MDMA_D0_X_COUNT)] = R2; /* Set Destination Count */ - /* Set Destination DMAConfig = DMA Enable, - Memory Write, 8-Bit Transfers, 1-D DMA, Flow - Stop, IOC */ - W[P1+OFFSET_(MDMA_D0_CONFIG)] = R4; - - IDLE; /* Wait for DMA to Complete */ - - R0 = 0x1; - W[P1+OFFSET_(MDMA_D0_IRQ_STATUS)] = R0; /* Write 1 to clear DMA interrupt */ - - /* DMA reset code to DATA BANK A which uses this port - * to avoid following problem - * " Data from a Data Cache fill can be corrupoted after or during - * instruction DMA if certain core stalls exist" - */ - -copy_as_data: - R0.H = reset_start; /* Source Address (high) */ - R0.L = reset_start; /* Source Address (low) */ - R1.H = reset_end; - R1.L = reset_end; - R2 = R1 - R0; /* Count */ - R1.H = hi(DATA_BANKA_SRAM); /* Destination Address (high) */ - R1.L = lo(DATA_BANKA_SRAM); /* Destination Address (low) */ - R3.L = DMAEN; /* Source DMAConfig Value (8-bit words) */ - R4.L = (DI_EN | WNR | DMAEN); /* Destination DMAConfig Value (8-bit words) */ - -DMA_DATA: - R6 = 0x1 (Z); - W[P1+OFFSET_(MDMA_S0_X_MODIFY)] = R6; /* Source Modify = 1 */ - W[P1+OFFSET_(MDMA_D0_X_MODIFY)] = R6; /* Destination Modify = 1 */ - - [P1+OFFSET_(MDMA_S0_START_ADDR)] = R0; /* Set Source Base Address */ - W[P1+OFFSET_(MDMA_S0_X_COUNT)] = R2; /* Set Source Count */ - /* Set Source DMAConfig = DMA Enable, - Memory Read, 8-Bit Transfers, 1-D DMA, Flow - Stop */ - W[P1+OFFSET_(MDMA_S0_CONFIG)] = R3; - - [P1+OFFSET_(MDMA_D0_START_ADDR)] = R1; /* Set Destination Base Address */ + /* Set Destination Base Address */ + [P1+OFFSET_(MDMA_D0_START_ADDR)] = R1; W[P1+OFFSET_(MDMA_D0_X_COUNT)] = R2; /* Set Destination Count */ /* Set Destination DMAConfig = DMA Enable, Memory Write, 8-Bit Transfers, 1-D DMA, Flow - Stop, IOC */ W[P1+OFFSET_(MDMA_D0_CONFIG)] = R4; - IDLE; /* Wait for DMA to Complete */ +WAIT_DMA_DONE: + p0.h = hi(MDMA_D0_IRQ_STATUS); + p0.l = lo(MDMA_D0_IRQ_STATUS); + R0 = W[P0](Z); + CC = BITTST(R0, 0); + if ! CC jump WAIT_DMA_DONE R0 = 0x1; - W[P1+OFFSET_(MDMA_D0_IRQ_STATUS)] = R0; /* Write 1 to clear DMA interrupt */ -copy_end: nop; + /* Write 1 to clear DMA interrupt */ + W[P1+OFFSET_(MDMA_D0_IRQ_STATUS)] = R0; /* Initialize BSS Section with 0 s */ p1.l = __bss_start; @@ -433,3 +311,6 @@ reset_end: nop; _exit: jump.s _exit; +get_pc: + r0 = rets; + rts; diff --git a/cpu/bf533/start1.S b/cpu/bf533/start1.S index 6f48124..72cfafb 100644 --- a/cpu/bf533/start1.S +++ b/cpu/bf533/start1.S @@ -24,8 +24,8 @@ #define ASSEMBLY #include <linux/config.h> -#include <asm/blackfin.h> #include <config.h> +#include <asm/blackfin.h> .global start1; .global _start1; @@ -34,5 +34,5 @@ _start1: start1: sp += -12; - call board_init_f; + call _board_init_f; sp += 12; diff --git a/cpu/bf533/traps.c b/cpu/bf533/traps.c index 37470d5..248e34f 100644 --- a/cpu/bf533/traps.c +++ b/cpu/bf533/traps.c @@ -42,6 +42,9 @@ #include <asm/page.h> #include <asm/machdep.h> #include "cpu.h" +#include <asm/arch/anomaly.h> +#include <asm/cplb.h> +#include <asm/io.h> void init_IRQ(void) { @@ -51,23 +54,187 @@ void init_IRQ(void) void process_int(unsigned long vec, struct pt_regs *fp) { + printf("interrupt\n"); return; } +extern unsigned int icplb_table[page_descriptor_table_size][2]; +extern unsigned int dcplb_table[page_descriptor_table_size][2]; + +unsigned long last_cplb_fault_retx; + +static unsigned int cplb_sizes[4] = + { 1024, 4 * 1024, 1024 * 1024, 4 * 1024 * 1024 }; + +void trap_c(struct pt_regs *regs) +{ + unsigned int addr; + unsigned long trapnr = (regs->seqstat) & SEQSTAT_EXCAUSE; + unsigned int i, j, size, *I0, *I1; + unsigned short data = 0; + + switch (trapnr) { + /* 0x26 - Data CPLB Miss */ + case VEC_CPLB_M: + +#ifdef ANOMALY_05000261 + /* + * Work around an anomaly: if we see a new DCPLB fault, + * return without doing anything. Then, + * if we get the same fault again, handle it. + */ + addr = last_cplb_fault_retx; + last_cplb_fault_retx = regs->retx; + printf("this time, curr = 0x%08x last = 0x%08x\n", + addr, last_cplb_fault_retx); + if (addr != last_cplb_fault_retx) + goto trap_c_return; +#endif + data = 1; + + case VEC_CPLB_I_M: + + if (data) { + addr = *(unsigned int *)pDCPLB_FAULT_ADDR; + } else { + addr = *(unsigned int *)pICPLB_FAULT_ADDR; + } + for (i = 0; i < page_descriptor_table_size; i++) { + if (data) { + size = cplb_sizes[dcplb_table[i][1] >> 16]; + j = dcplb_table[i][0]; + } else { + size = cplb_sizes[icplb_table[i][1] >> 16]; + j = icplb_table[i][0]; + } + if ((j <= addr) && ((j + size) > addr)) { + debug("found %i 0x%08x\n", i, j); + break; + } + } + if (i == page_descriptor_table_size) { + printf("something is really wrong\n"); + do_reset(NULL, 0, 0, NULL); + } + + /* Turn the cache off */ + if (data) { + sync(); + asm(" .align 8; "); + *(unsigned int *)DMEM_CONTROL &= + ~(ACACHE_BCACHE | ENDCPLB | PORT_PREF0); + sync(); + } else { + sync(); + asm(" .align 8; "); + *(unsigned int *)IMEM_CONTROL &= ~(IMC | ENICPLB); + sync(); + } + + if (data) { + I0 = (unsigned int *)DCPLB_ADDR0; + I1 = (unsigned int *)DCPLB_DATA0; + } else { + I0 = (unsigned int *)ICPLB_ADDR0; + I1 = (unsigned int *)ICPLB_DATA0; + } + + j = 0; + while (*I1 & CPLB_LOCK) { + debug("skipping %i %08p - %08x\n", j, I1, *I1); + *I0++; + *I1++; + j++; + } + + debug("remove %i 0x%08x 0x%08x\n", j, *I0, *I1); + + for (; j < 15; j++) { + debug("replace %i 0x%08x 0x%08x\n", j, I0, I0 + 1); + *I0++ = *(I0 + 1); + *I1++ = *(I1 + 1); + } + + if (data) { + *I0 = dcplb_table[i][0]; + *I1 = dcplb_table[i][1]; + I0 = (unsigned int *)DCPLB_ADDR0; + I1 = (unsigned int *)DCPLB_DATA0; + } else { + *I0 = icplb_table[i][0]; + *I1 = icplb_table[i][1]; + I0 = (unsigned int *)ICPLB_ADDR0; + I1 = (unsigned int *)ICPLB_DATA0; + } + + for (j = 0; j < 16; j++) { + debug("%i 0x%08x 0x%08x\n", j, *I0++, *I1++); + } + + /* Turn the cache back on */ + if (data) { + j = *(unsigned int *)DMEM_CONTROL; + sync(); + asm(" .align 8; "); + *(unsigned int *)DMEM_CONTROL = + ACACHE_BCACHE | ENDCPLB | PORT_PREF0 | j; + sync(); + } else { + sync(); + asm(" .align 8; "); + *(unsigned int *)IMEM_CONTROL = IMC | ENICPLB; + sync(); + } + + break; + default: + /* All traps come here */ + printf("code=[0x%x], ", (unsigned int)(regs->seqstat & 0x3f)); + printf("stack frame=0x%x, ", (unsigned int)regs); + printf("bad PC=0x%04x\n", (unsigned int)regs->pc); + dump(regs); + printf("\n\n"); + + printf("Unhandled IRQ or exceptions!\n"); + printf("Please reset the board \n"); + do_reset(NULL, 0, 0, NULL); + } + + return; + +} + void dump(struct pt_regs *fp) { - printf("PC: %08lx\n", fp->pc); - printf("SEQSTAT: %08lx SP: %08lx\n", (long) fp->seqstat, - (long) fp); - printf("R0: %08lx R1: %08lx R2: %08lx R3: %08lx\n", - fp->r0, fp->r1, fp->r2, fp->r3); - printf("R4: %08lx R5: %08lx R6: %08lx R7: %08lx\n", - fp->r4, fp->r5, fp->r6, fp->r7); - printf("P0: %08lx P1: %08lx P2: %08lx P3: %08lx\n", - fp->p0, fp->p1, fp->p2, fp->p3); - printf("P4: %08lx P5: %08lx FP: %08lx\n", fp->p4, fp->p5, - fp->fp); - printf("A0.w: %08lx A0.x: %08lx A1.w: %08lx A1.x: %08lx\n", - fp->a0w, fp->a0x, fp->a1w, fp->a1x); - printf("\n"); + debug("RETE: %08lx RETN: %08lx RETX: %08lx RETS: %08lx\n", + fp->rete, fp->retn, fp->retx, fp->rets); + debug("IPEND: %04lx SYSCFG: %04lx\n", fp->ipend, fp->syscfg); + debug("SEQSTAT: %08lx SP: %08lx\n", (long)fp->seqstat, (long)fp); + debug("R0: %08lx R1: %08lx R2: %08lx R3: %08lx\n", + fp->r0, fp->r1, fp->r2, fp->r3); + debug("R4: %08lx R5: %08lx R6: %08lx R7: %08lx\n", + fp->r4, fp->r5, fp->r6, fp->r7); + debug("P0: %08lx P1: %08lx P2: %08lx P3: %08lx\n", + fp->p0, fp->p1, fp->p2, fp->p3); + debug("P4: %08lx P5: %08lx FP: %08lx\n", + fp->p4, fp->p5, fp->fp); + debug("A0.w: %08lx A0.x: %08lx A1.w: %08lx A1.x: %08lx\n", + fp->a0w, fp->a0x, fp->a1w, fp->a1x); + + debug("LB0: %08lx LT0: %08lx LC0: %08lx\n", + fp->lb0, fp->lt0, fp->lc0); + debug("LB1: %08lx LT1: %08lx LC1: %08lx\n", + fp->lb1, fp->lt1, fp->lc1); + debug("B0: %08lx L0: %08lx M0: %08lx I0: %08lx\n", + fp->b0, fp->l0, fp->m0, fp->i0); + debug("B1: %08lx L1: %08lx M1: %08lx I1: %08lx\n", + fp->b1, fp->l1, fp->m1, fp->i1); + debug("B2: %08lx L2: %08lx M2: %08lx I2: %08lx\n", + fp->b2, fp->l2, fp->m2, fp->i2); + debug("B3: %08lx L3: %08lx M3: %08lx I3: %08lx\n", + fp->b3, fp->l3, fp->m3, fp->i3); + + debug("DCPLB_FAULT_ADDR=%p\n", *pDCPLB_FAULT_ADDR); + debug("ICPLB_FAULT_ADDR=%p\n", *pICPLB_FAULT_ADDR); + } diff --git a/cpu/bf533/video.c b/cpu/bf533/video.c new file mode 100644 index 0000000..3ff0151 --- /dev/null +++ b/cpu/bf533/video.c @@ -0,0 +1,194 @@ +/* + * (C) Copyright 2000 + * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it + * (C) Copyright 2002 + * Wolfgang Denk, wd@denx.de + * (C) Copyright 2006 + * Aubrey Li, aubrey.li@analog.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <stdarg.h> +#include <common.h> +#include <config.h> +#include <asm/blackfin.h> +#include <i2c.h> +#include <linux/types.h> +#include <devices.h> + +#ifdef CONFIG_VIDEO +#define NTSC_FRAME_ADDR 0x06000000 +#include "video.h" + +/* NTSC OUTPUT SIZE 720 * 240 */ +#define VERTICAL 2 +#define HORIZONTAL 4 + +int is_vblank_line(const int line) +{ + /* + * This array contains a single bit for each line in + * an NTSC frame. + */ + if ((line <= 18) || (line >= 264 && line <= 281) || (line == 528)) + return true; + + return false; +} + +int NTSC_framebuffer_init(char *base_address) +{ + const int NTSC_frames = 1; + const int NTSC_lines = 525; + char *dest = base_address; + int frame_num, line_num; + + for (frame_num = 0; frame_num < NTSC_frames; ++frame_num) { + for (line_num = 1; line_num <= NTSC_lines; ++line_num) { + unsigned int code; + int offset = 0; + int i; + + if (is_vblank_line(line_num)) + offset++; + + if (line_num > 266 || line_num < 3) + offset += 2; + + /* Output EAV code */ + code = SystemCodeMap[offset].EAV; + write_dest_byte((char)(code >> 24) & 0xff); + write_dest_byte((char)(code >> 16) & 0xff); + write_dest_byte((char)(code >> 8) & 0xff); + write_dest_byte((char)(code) & 0xff); + + /* Output horizontal blanking */ + for (i = 0; i < 67 * 2; ++i) { + write_dest_byte(0x80); + write_dest_byte(0x10); + } + + /* Output SAV */ + code = SystemCodeMap[offset].SAV; + write_dest_byte((char)(code >> 24) & 0xff); + write_dest_byte((char)(code >> 16) & 0xff); + write_dest_byte((char)(code >> 8) & 0xff); + write_dest_byte((char)(code) & 0xff); + + /* Output empty horizontal data */ + for (i = 0; i < 360 * 2; ++i) { + write_dest_byte(0x80); + write_dest_byte(0x10); + } + } + } + + return dest - base_address; +} + +void fill_frame(char *Frame, int Value) +{ + int *OddPtr32; + int OddLine; + int *EvenPtr32; + int EvenLine; + int i; + int *data; + int m, n; + + /* fill odd and even frames */ + for (OddLine = 22, EvenLine = 285; OddLine < 263; OddLine++, EvenLine++) { + OddPtr32 = (int *)((Frame + (OddLine * 1716)) + 276); + EvenPtr32 = (int *)((Frame + (EvenLine * 1716)) + 276); + for (i = 0; i < 360; i++, OddPtr32++, EvenPtr32++) { + *OddPtr32 = Value; + *EvenPtr32 = Value; + } + } + + for (m = 0; m < VERTICAL; m++) { + data = (int *)u_boot_logo.data; + for (OddLine = (22 + m), EvenLine = (285 + m); + OddLine < (u_boot_logo.height * VERTICAL) + (22 + m); + OddLine += VERTICAL, EvenLine += VERTICAL) { + OddPtr32 = (int *)((Frame + ((OddLine) * 1716)) + 276); + EvenPtr32 = + (int *)((Frame + ((EvenLine) * 1716)) + 276); + for (i = 0; i < u_boot_logo.width / 2; i++) { + /* enlarge one pixel to m x n */ + for (n = 0; n < HORIZONTAL; n++) { + *OddPtr32++ = *data; + *EvenPtr32++ = *data; + } + data++; + } + } + } +} + +void video_putc(const char c) +{ +} + +void video_puts(const char *s) +{ +} + +static int video_init(void) +{ + char *NTSCFrame; + NTSCFrame = (char *)NTSC_FRAME_ADDR; + NTSC_framebuffer_init(NTSCFrame); + fill_frame(NTSCFrame, BLUE); + + *pPPI_CONTROL = 0x0082; + *pPPI_FRAME = 0x020D; + + *pDMA0_START_ADDR = NTSCFrame; + *pDMA0_X_COUNT = 0x035A; + *pDMA0_X_MODIFY = 0x0002; + *pDMA0_Y_COUNT = 0x020D; + *pDMA0_Y_MODIFY = 0x0002; + *pDMA0_CONFIG = 0x1015; + *pPPI_CONTROL = 0x0083; + return 0; +} + +int drv_video_init(void) +{ + int error, devices = 1; + + device_t videodev; + + video_init(); /* Video initialization */ + + memset(&videodev, 0, sizeof(videodev)); + + strcpy(videodev.name, "video"); + videodev.ext = DEV_EXT_VIDEO; /* Video extensions */ + videodev.flags = DEV_FLAGS_OUTPUT; /* Output only */ + videodev.putc = video_putc; /* 'putc' function */ + videodev.puts = video_puts; /* 'puts' function */ + + error = device_register(&videodev); + + return (error == 0) ? devices : error; +} +#endif diff --git a/cpu/bf533/video.h b/cpu/bf533/video.h new file mode 100644 index 0000000..d237f6a --- /dev/null +++ b/cpu/bf533/video.h @@ -0,0 +1,25 @@ +#include <video_logo.h> +#define write_dest_byte(val) {*dest++=val;} +#define BLACK (0x01800180) /* black pixel pattern */ +#define BLUE (0x296E29F0) /* blue pixel pattern */ +#define RED (0x51F0515A) /* red pixel pattern */ +#define MAGENTA (0x6ADE6ACA) /* magenta pixel pattern */ +#define GREEN (0x91229136) /* green pixel pattern */ +#define CYAN (0xAA10AAA6) /* cyan pixel pattern */ +#define YELLOW (0xD292D210) /* yellow pixel pattern */ +#define WHITE (0xFE80FE80) /* white pixel pattern */ + +#define true 1 +#define false 0 + +typedef struct { + unsigned int SAV; + unsigned int EAV; +} SystemCodeType; + +const SystemCodeType SystemCodeMap[4] = { + {0xFF000080, 0xFF00009D}, + {0xFF0000AB, 0xFF0000B6}, + {0xFF0000C7, 0xFF0000DA}, + {0xFF0000EC, 0xFF0000F1} +}; diff --git a/cpu/bf537/Makefile b/cpu/bf537/Makefile new file mode 100644 index 0000000..61c7338 --- /dev/null +++ b/cpu/bf537/Makefile @@ -0,0 +1,52 @@ +# U-boot - Makefile +# +# Copyright (c) 2005 blackfin.uclinux.org +# +# (C) Copyright 2000-2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(CPU).a + +START = start.o start1.o interrupt.o cache.o flush.o init_sdram.o +COBJS = cpu.o traps.o ints.o serial.o interrupts.o video.o i2c.o + +EXTRA = init_sdram_bootrom_initblock.o + +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) +START := $(addprefix $(obj),$(START)) + +all: $(obj).depend $(START) $(LIB) $(obj).depend $(EXTRA) + +$(LIB): $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/cpu/bf537/cache.S b/cpu/bf537/cache.S new file mode 100644 index 0000000..5bda5bf --- /dev/null +++ b/cpu/bf537/cache.S @@ -0,0 +1,128 @@ +#define ASSEMBLY +#include <asm/linkage.h> +#include <config.h> +#include <asm/blackfin.h> + +.text +.align 2 +ENTRY(_blackfin_icache_flush_range) + R2 = -32; + R2 = R0 & R2; + P0 = R2; + P1 = R1; + CSYNC; + 1: + IFLUSH[P0++]; + CC = P0 < P1(iu); + IF CC JUMP 1b(bp); + IFLUSH[P0]; + SSYNC; + RTS; + +ENTRY(_blackfin_dcache_flush_range) + R2 = -32; + R2 = R0 & R2; + P0 = R2; + P1 = R1; + CSYNC; +1: + FLUSH[P0++]; + CC = P0 < P1(iu); + IF CC JUMP 1b(bp); + FLUSH[P0]; + SSYNC; + RTS; + +ENTRY(_icache_invalidate) +ENTRY(_invalidate_entire_icache) + [--SP] = (R7:5); + + P0.L = (IMEM_CONTROL & 0xFFFF); + P0.H = (IMEM_CONTROL >> 16); + R7 =[P0]; + + /* + * Clear the IMC bit , All valid bits in the instruction + * cache are set to the invalid state + */ + BITCLR(R7, IMC_P); + CLI R6; + /* SSYNC required before invalidating cache. */ + SSYNC; + .align 8; + [P0] = R7; + SSYNC; + STI R6; + + /* Configures the instruction cache agian */ + R6 = (IMC | ENICPLB); + R7 = R7 | R6; + + CLI R6; + SSYNC; + .align 8; + [P0] = R7; + SSYNC; + STI R6; + + (R7:5) =[SP++]; + RTS; + +/* + * Invalidate the Entire Data cache by + * clearing DMC[1:0] bits + */ +ENTRY(_invalidate_entire_dcache) +ENTRY(_dcache_invalidate) + [--SP] = (R7:6); + + P0.L = (DMEM_CONTROL & 0xFFFF); + P0.H = (DMEM_CONTROL >> 16); + R7 =[P0]; + + /* + * Clear the DMC[1:0] bits, All valid bits in the data + * cache are set to the invalid state + */ + BITCLR(R7, DMC0_P); + BITCLR(R7, DMC1_P); + CLI R6; + SSYNC; + .align 8; + [P0] = R7; + SSYNC; + STI R6; + /* Configures the data cache again */ + + R6 = (ACACHE_BCACHE | ENDCPLB | PORT_PREF0); + R7 = R7 | R6; + + CLI R6; + SSYNC; + .align 8; + [P0] = R7; + SSYNC; + STI R6; + + (R7:6) =[SP++]; + RTS; + +ENTRY(_blackfin_dcache_invalidate_range) + R2 = -32; + R2 = R0 & R2; + P0 = R2; + P1 = R1; + CSYNC; +1: + FLUSHINV[P0++]; + CC = P0 < P1(iu); + IF CC JUMP 1b(bp); + + /* + * If the data crosses a cache line, then we'll be pointing to + * the last cache line, but won't have flushed/invalidated it yet, so do + * one more. + */ + FLUSHINV[P0]; + SSYNC; + RTS; diff --git a/cpu/bf537/config.mk b/cpu/bf537/config.mk new file mode 100644 index 0000000..4d57d9c --- /dev/null +++ b/cpu/bf537/config.mk @@ -0,0 +1,27 @@ +# U-boot - config.mk +# +# Copyright (c) 2005 blackfin.uclinux.org +# +# (C) Copyright 2000-2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +PLATFORM_RELFLAGS += -mcpu=bf537 -ffixed-P5 diff --git a/cpu/bf537/cpu.c b/cpu/bf537/cpu.c new file mode 100644 index 0000000..cb8dc3c --- /dev/null +++ b/cpu/bf537/cpu.c @@ -0,0 +1,227 @@ +/* + * U-boot - cpu.c CPU specific functions + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/blackfin.h> +#include <command.h> +#include <asm/entry.h> +#include <asm/cplb.h> +#include <asm/io.h> + +#define CACHE_ON 1 +#define CACHE_OFF 0 + +extern unsigned int icplb_table[page_descriptor_table_size][2]; +extern unsigned int dcplb_table[page_descriptor_table_size][2]; + +int do_reset(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + __asm__ __volatile__("cli r3;" "P0 = %0;" "JUMP (P0);"::"r"(L1_ISRAM) + ); + + return 0; +} + +/* These functions are just used to satisfy the linker */ +int cpu_init(void) +{ + return 0; +} + +int cleanup_before_linux(void) +{ + return 0; +} + +void icache_enable(void) +{ + unsigned int *I0, *I1; + int i, j = 0; + + if ((*pCHIPID >> 28) < 2) + return; + + /* Before enable icache, disable it first */ + icache_disable(); + I0 = (unsigned int *)ICPLB_ADDR0; + I1 = (unsigned int *)ICPLB_DATA0; + + /* make sure the locked ones go in first */ + for (i = 0; i < page_descriptor_table_size; i++) { + if (CPLB_LOCK & icplb_table[i][1]) { + debug("adding %02i %02i 0x%08x 0x%08x\n", i, j, + icplb_table[i][0], icplb_table[i][1]); + *I0++ = icplb_table[i][0]; + *I1++ = icplb_table[i][1]; + j++; + } + } + + for (i = 0; i < page_descriptor_table_size; i++) { + if (!(CPLB_LOCK & icplb_table[i][1])) { + debug("adding %02i %02i 0x%08x 0x%08x\n", i, j, + icplb_table[i][0], icplb_table[i][1]); + *I0++ = icplb_table[i][0]; + *I1++ = icplb_table[i][1]; + j++; + if (j == 16) { + break; + } + } + } + + /* Fill the rest with invalid entry */ + if (j <= 15) { + for (; j < 16; j++) { + debug("filling %i with 0", j); + *I1++ = 0x0; + } + + } + + cli(); + sync(); + asm(" .align 8; "); + *(unsigned int *)IMEM_CONTROL = IMC | ENICPLB; + sync(); + sti(); +} + +void icache_disable(void) +{ + if ((*pCHIPID >> 28) < 2) + return; + cli(); + sync(); + asm(" .align 8; "); + *(unsigned int *)IMEM_CONTROL &= ~(IMC | ENICPLB); + sync(); + sti(); +} + +int icache_status(void) +{ + unsigned int value; + value = *(unsigned int *)IMEM_CONTROL; + + if (value & (IMC | ENICPLB)) + return CACHE_ON; + else + return CACHE_OFF; +} + +void dcache_enable(void) +{ + unsigned int *I0, *I1; + unsigned int temp; + int i, j = 0; + + /* Before enable dcache, disable it first */ + dcache_disable(); + I0 = (unsigned int *)DCPLB_ADDR0; + I1 = (unsigned int *)DCPLB_DATA0; + + /* make sure the locked ones go in first */ + for (i = 0; i < page_descriptor_table_size; i++) { + if (CPLB_LOCK & dcplb_table[i][1]) { + debug("adding %02i %02i 0x%08x 0x%08x\n", i, j, + dcplb_table[i][0], dcplb_table[i][1]); + *I0++ = dcplb_table[i][0]; + *I1++ = dcplb_table[i][1]; + j++; + } else { + debug("skip %02i %02i 0x%08x 0x%08x\n", i, j, + dcplb_table[i][0], dcplb_table[i][1]); + } + } + + for (i = 0; i < page_descriptor_table_size; i++) { + if (!(CPLB_LOCK & dcplb_table[i][1])) { + debug("adding %02i %02i 0x%08x 0x%08x\n", i, j, + dcplb_table[i][0], dcplb_table[i][1]); + *I0++ = dcplb_table[i][0]; + *I1++ = dcplb_table[i][1]; + j++; + if (j == 16) { + break; + } + } + } + + /* Fill the rest with invalid entry */ + if (j <= 15) { + for (; j < 16; j++) { + debug("filling %i with 0", j); + *I1++ = 0x0; + } + } + + cli(); + temp = *(unsigned int *)DMEM_CONTROL; + sync(); + asm(" .align 8; "); + *(unsigned int *)DMEM_CONTROL = + ACACHE_BCACHE | ENDCPLB | PORT_PREF0 | temp; + sync(); + sti(); +} + +void dcache_disable(void) +{ + unsigned int *I0, *I1; + int i; + + cli(); + sync(); + asm(" .align 8; "); + *(unsigned int *)DMEM_CONTROL &= + ~(ACACHE_BCACHE | ENDCPLB | PORT_PREF0); + sync(); + sti(); + + /* after disable dcache, + * clear it so we don't confuse the next application + */ + I0 = (unsigned int *)DCPLB_ADDR0; + I1 = (unsigned int *)DCPLB_DATA0; + + for (i = 0; i < 16; i++) { + *I0++ = 0x0; + *I1++ = 0x0; + } +} + +int dcache_status(void) +{ + unsigned int value; + value = *(unsigned int *)DMEM_CONTROL; + + if (value & (ENDCPLB)) + return CACHE_ON; + else + return CACHE_OFF; +} diff --git a/cpu/bf537/cpu.h b/cpu/bf537/cpu.h new file mode 100644 index 0000000..821363e --- /dev/null +++ b/cpu/bf537/cpu.h @@ -0,0 +1,66 @@ +/* + * U-boot - cpu.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _CPU_H_ +#define _CPU_H_ + +#include <command.h> + +#define INTERNAL_IRQS (32) +#define NUM_IRQ_NODES 16 +#define DEF_INTERRUPT_FLAGS 1 +#define MAX_TIM_LOAD 0xFFFFFFFF + +void blackfin_irq_panic(int reason, struct pt_regs *reg); +extern void dump(struct pt_regs *regs); +void display_excp(void); +asmlinkage void evt_nmi(void); +asmlinkage void evt_exception(void); +asmlinkage void trap(void); +asmlinkage void evt_ivhw(void); +asmlinkage void evt_rst(void); +asmlinkage void evt_timer(void); +asmlinkage void evt_evt7(void); +asmlinkage void evt_evt8(void); +asmlinkage void evt_evt9(void); +asmlinkage void evt_evt10(void); +asmlinkage void evt_evt11(void); +asmlinkage void evt_evt12(void); +asmlinkage void evt_evt13(void); +asmlinkage void evt_soft_int1(void); +asmlinkage void evt_system_call(void); +void blackfin_irq_panic(int reason, struct pt_regs *regs); +void blackfin_free_irq(unsigned int irq, void *dev_id); +void call_isr(int irq, struct pt_regs *fp); +void blackfin_do_irq(int vec, struct pt_regs *fp); +void blackfin_init_IRQ(void); +void blackfin_enable_irq(unsigned int irq); +void blackfin_disable_irq(unsigned int irq); +extern int do_reset(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]); +int blackfin_request_irq(unsigned int irq, + void (*handler) (int, void *, struct pt_regs *), + unsigned long flags, const char *devname, + void *dev_id); +void timer_init(void); +#endif diff --git a/cpu/bf537/flush.S b/cpu/bf537/flush.S new file mode 100644 index 0000000..c260a8f --- /dev/null +++ b/cpu/bf537/flush.S @@ -0,0 +1,403 @@ +/* Copyright (C) 2003 Analog Devices, Inc. All Rights Reserved. + * Copyright (C) 2004 LG SOft India. All Rights Reserved. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. + */ +#define ASSEMBLY + +#include <asm/linkage.h> +#include <asm/cplb.h> +#include <config.h> +#include <asm/blackfin.h> + +.text + +/* This is an external function being called by the user + * application through __flush_cache_all. Currently this function + * serves the purpose of flushing all the pending writes in + * in the instruction cache. + */ + +ENTRY(_flush_instruction_cache) + [--SP] = ( R7:6, P5:4 ); + LINK 12; + SP += -12; + P5.H = (ICPLB_ADDR0 >> 16); + P5.L = (ICPLB_ADDR0 & 0xFFFF); + P4.H = (ICPLB_DATA0 >> 16); + P4.L = (ICPLB_DATA0 & 0xFFFF); + R7 = CPLB_VALID | CPLB_L1_CHBL; + R6 = 16; +inext: R0 = [P5++]; + R1 = [P4++]; + [--SP] = RETS; + CALL _icplb_flush; /* R0 = page, R1 = data*/ + RETS = [SP++]; +iskip: R6 += -1; + CC = R6; + IF CC JUMP inext; + SSYNC; + SP += 12; + UNLINK; + ( R7:6, P5:4 ) = [SP++]; + RTS; + +/* This is an internal function to flush all pending + * writes in the cache associated with a particular ICPLB. + * + * R0 - page's start address + * R1 - CPLB's data field. + */ + +.align 2 +ENTRY(_icplb_flush) + [--SP] = ( R7:0, P5:0 ); + [--SP] = LC0; + [--SP] = LT0; + [--SP] = LB0; + [--SP] = LC1; + [--SP] = LT1; + [--SP] = LB1; + + /* If it's a 1K or 4K page, then it's quickest to + * just systematically flush all the addresses in + * the page, regardless of whether they're in the + * cache, or dirty. If it's a 1M or 4M page, there + * are too many addresses, and we have to search the + * cache for lines corresponding to the page. + */ + + CC = BITTST(R1, 17); /* 1MB or 4MB */ + IF !CC JUMP iflush_whole_page; + + /* We're only interested in the page's size, so extract + * this from the CPLB (bits 17:16), and scale to give an + * offset into the page_size and page_prefix tables. + */ + + R1 <<= 14; + R1 >>= 30; + R1 <<= 2; + + /* We can also determine the sub-bank used, because this is + * taken from bits 13:12 of the address. + */ + + R3 = ((12<<8)|2); /* Extraction pattern */ + nop; /* Anamoly 05000209 */ + R4 = EXTRACT(R0, R3.L) (Z); /* Extract bits */ + + /* Save in extraction pattern for later deposit. */ + R3.H = R4.L << 0; + + /* So: + * R0 = Page start + * R1 = Page length (actually, offset into size/prefix tables) + * R3 = sub-bank deposit values + * + * The cache has 2 Ways, and 64 sets, so we iterate through + * the sets, accessing the tag for each Way, for our Bank and + * sub-bank, looking for dirty, valid tags that match our + * address prefix. + */ + + P5.L = (ITEST_COMMAND & 0xFFFF); + P5.H = (ITEST_COMMAND >> 16); + P4.L = (ITEST_DATA0 & 0xFFFF); + P4.H = (ITEST_DATA0 >> 16); + + P0.L = page_prefix_table; + P0.H = page_prefix_table; + P1 = R1; + R5 = 0; /* Set counter*/ + P0 = P1 + P0; + R4 = [P0]; /* This is the address prefix*/ + + /* We're reading (bit 1==0) the tag (bit 2==0), and we + * don't care about which double-word, since we're only + * fetching tags, so we only have to set Set, Bank, + * Sub-bank and Way. + */ + + P2 = 4; + LSETUP (ifs1, ife1) LC1 = P2; +ifs1: P0 = 32; /* iterate over all sets*/ + LSETUP (ifs0, ife0) LC0 = P0; +ifs0: R6 = R5 << 5; /* Combine set*/ + R6.H = R3.H << 0 ; /* and sub-bank*/ + [P5] = R6; /* Issue Command*/ + SSYNC; /* CSYNC will not work here :(*/ + R7 = [P4]; /* and read Tag.*/ + CC = BITTST(R7, 0); /* Check if valid*/ + IF !CC JUMP ifskip; /* and skip if not.*/ + + /* Compare against the page address. First, plant bits 13:12 + * into the tag, since those aren't part of the returned data. + */ + + R7 = DEPOSIT(R7, R3); /* set 13:12*/ + R1 = R7 & R4; /* Mask off lower bits*/ + CC = R1 == R0; /* Compare against page start.*/ + IF !CC JUMP ifskip; /* Skip it if it doesn't match.*/ + + /* Tag address matches against page, so this is an entry + * we must flush. + */ + + R7 >>= 10; /* Mask off the non-address bits*/ + R7 <<= 10; + P3 = R7; + IFLUSH [P3]; /* And flush the entry*/ +ifskip: +ife0: R5 += 1; /* Advance to next Set*/ +ife1: NOP; + +ifinished: + SSYNC; /* Ensure the data gets out to mem.*/ + + /*Finished. Restore context.*/ + LB1 = [SP++]; + LT1 = [SP++]; + LC1 = [SP++]; + LB0 = [SP++]; + LT0 = [SP++]; + LC0 = [SP++]; + ( R7:0, P5:0 ) = [SP++]; + RTS; + +iflush_whole_page: + /* It's a 1K or 4K page, so quicker to just flush the + * entire page. + */ + + P1 = 32; /* For 1K pages*/ + P2 = P1 << 2; /* For 4K pages*/ + P0 = R0; /* Start of page*/ + CC = BITTST(R1, 16); /* Whether 1K or 4K*/ + IF CC P1 = P2; + P1 += -1; /* Unroll one iteration*/ + SSYNC; + IFLUSH [P0++]; /* because CSYNC can't end loops.*/ + LSETUP (isall, ieall) LC0 = P1; +isall:IFLUSH [P0++]; +ieall: NOP; + SSYNC; + JUMP ifinished; + +/* This is an external function being called by the user + * application through __flush_cache_all. Currently this function + * serves the purpose of flushing all the pending writes in + * in the data cache. + */ + +ENTRY(_flush_data_cache) + [--SP] = ( R7:6, P5:4 ); + LINK 12; + SP += -12; + P5.H = (DCPLB_ADDR0 >> 16); + P5.L = (DCPLB_ADDR0 & 0xFFFF); + P4.H = (DCPLB_DATA0 >> 16); + P4.L = (DCPLB_DATA0 & 0xFFFF); + R7 = CPLB_VALID | CPLB_L1_CHBL | CPLB_DIRTY (Z); + R6 = 16; +next: R0 = [P5++]; + R1 = [P4++]; + CC = BITTST(R1, 14); /* Is it write-through?*/ + IF CC JUMP skip; /* If so, ignore it.*/ + R2 = R1 & R7; /* Is it a dirty, cached page?*/ + CC = R2; + IF !CC JUMP skip; /* If not, ignore it.*/ + [--SP] = RETS; + CALL _dcplb_flush; /* R0 = page, R1 = data*/ + RETS = [SP++]; +skip: R6 += -1; + CC = R6; + IF CC JUMP next; + SSYNC; + SP += 12; + UNLINK; + ( R7:6, P5:4 ) = [SP++]; + RTS; + +/* This is an internal function to flush all pending + * writes in the cache associated with a particular DCPLB. + * + * R0 - page's start address + * R1 - CPLB's data field. + */ + +.align 2 +ENTRY(_dcplb_flush) + [--SP] = ( R7:0, P5:0 ); + [--SP] = LC0; + [--SP] = LT0; + [--SP] = LB0; + [--SP] = LC1; + [--SP] = LT1; + [--SP] = LB1; + + /* If it's a 1K or 4K page, then it's quickest to + * just systematically flush all the addresses in + * the page, regardless of whether they're in the + * cache, or dirty. If it's a 1M or 4M page, there + * are too many addresses, and we have to search the + * cache for lines corresponding to the page. + */ + + CC = BITTST(R1, 17); /* 1MB or 4MB */ + IF !CC JUMP dflush_whole_page; + + /* We're only interested in the page's size, so extract + * this from the CPLB (bits 17:16), and scale to give an + * offset into the page_size and page_prefix tables. + */ + + R1 <<= 14; + R1 >>= 30; + R1 <<= 2; + + /* The page could be mapped into Bank A or Bank B, depending + * on (a) whether both banks are configured as cache, and + * (b) on whether address bit A[x] is set. x is determined + * by DCBS in DMEM_CONTROL + */ + + R2 = 0; /* Default to Bank A (Bank B would be 1)*/ + + P0.L = (DMEM_CONTROL & 0xFFFF); + P0.H = (DMEM_CONTROL >> 16); + + R3 = [P0]; /* If Bank B is not enabled as cache*/ + CC = BITTST(R3, 2); /* then Bank A is our only option.*/ + IF CC JUMP bank_chosen; + + R4 = 1<<14; /* If DCBS==0, use A[14].*/ + R5 = R4 << 7; /* If DCBS==1, use A[23];*/ + CC = BITTST(R3, 4); + IF CC R4 = R5; /* R4 now has either bit 14 or bit 23 set.*/ + R5 = R0 & R4; /* Use it to test the Page address*/ + CC = R5; /* and if that bit is set, we use Bank B,*/ + R2 = CC; /* else we use Bank A.*/ + R2 <<= 23; /* The Bank selection's at posn 23.*/ + +bank_chosen: + + /* We can also determine the sub-bank used, because this is + * taken from bits 13:12 of the address. + */ + + R3 = ((12<<8)|2); /* Extraction pattern */ + nop; /*Anamoly 05000209*/ + R4 = EXTRACT(R0, R3.L) (Z); /* Extract bits*/ + /* Save in extraction pattern for later deposit.*/ + R3.H = R4.L << 0; + + /* So: + * R0 = Page start + * R1 = Page length (actually, offset into size/prefix tables) + * R2 = Bank select mask + * R3 = sub-bank deposit values + * + * The cache has 2 Ways, and 64 sets, so we iterate through + * the sets, accessing the tag for each Way, for our Bank and + * sub-bank, looking for dirty, valid tags that match our + * address prefix. + */ + + P5.L = (DTEST_COMMAND & 0xFFFF); + P5.H = (DTEST_COMMAND >> 16); + P4.L = (DTEST_DATA0 & 0xFFFF); + P4.H = (DTEST_DATA0 >> 16); + + P0.L = page_prefix_table; + P0.H = page_prefix_table; + P1 = R1; + R5 = 0; /* Set counter*/ + P0 = P1 + P0; + R4 = [P0]; /* This is the address prefix*/ + + + /* We're reading (bit 1==0) the tag (bit 2==0), and we + * don't care about which double-word, since we're only + * fetching tags, so we only have to set Set, Bank, + * Sub-bank and Way. + */ + + P2 = 2; + LSETUP (fs1, fe1) LC1 = P2; +fs1: P0 = 64; /* iterate over all sets*/ + LSETUP (fs0, fe0) LC0 = P0; +fs0: R6 = R5 << 5; /* Combine set*/ + R6.H = R3.H << 0 ; /* and sub-bank*/ + R6 = R6 | R2; /* and Bank. Leave Way==0 at first.*/ + BITSET(R6,14); + [P5] = R6; /* Issue Command*/ + SSYNC; + R7 = [P4]; /* and read Tag.*/ + CC = BITTST(R7, 0); /* Check if valid*/ + IF !CC JUMP fskip; /* and skip if not.*/ + CC = BITTST(R7, 1); /* Check if dirty*/ + IF !CC JUMP fskip; /* and skip if not.*/ + + /* Compare against the page address. First, plant bits 13:12 + * into the tag, since those aren't part of the returned data. + */ + + R7 = DEPOSIT(R7, R3); /* set 13:12*/ + R1 = R7 & R4; /* Mask off lower bits*/ + CC = R1 == R0; /* Compare against page start.*/ + IF !CC JUMP fskip; /* Skip it if it doesn't match.*/ + + /* Tag address matches against page, so this is an entry + * we must flush. + */ + + R7 >>= 10; /* Mask off the non-address bits*/ + R7 <<= 10; + P3 = R7; + SSYNC; + FLUSHINV [P3]; /* And flush the entry*/ +fskip: +fe0: R5 += 1; /* Advance to next Set*/ +fe1: BITSET(R2, 26); /* Go to next Way.*/ + +dfinished: + SSYNC; /* Ensure the data gets out to mem.*/ + + /*Finished. Restore context.*/ + LB1 = [SP++]; + LT1 = [SP++]; + LC1 = [SP++]; + LB0 = [SP++]; + LT0 = [SP++]; + LC0 = [SP++]; + ( R7:0, P5:0 ) = [SP++]; + RTS; + +dflush_whole_page: + + /* It's a 1K or 4K page, so quicker to just flush the + * entire page. + */ + + P1 = 32; /* For 1K pages*/ + P2 = P1 << 2; /* For 4K pages*/ + P0 = R0; /* Start of page*/ + CC = BITTST(R1, 16); /* Whether 1K or 4K*/ + IF CC P1 = P2; + P1 += -1; /* Unroll one iteration*/ + SSYNC; + FLUSHINV [P0++]; /* because CSYNC can't end loops.*/ + LSETUP (eall, eall) LC0 = P1; +eall: FLUSHINV [P0++]; + SSYNC; + JUMP dfinished; + +.align 4; +page_prefix_table: +.byte4 0xFFFFFC00; /* 1K */ +.byte4 0xFFFFF000; /* 4K */ +.byte4 0xFFF00000; /* 1M */ +.byte4 0xFFC00000; /* 4M */ +.page_prefix_table.end: diff --git a/cpu/bf537/i2c.c b/cpu/bf537/i2c.c new file mode 100644 index 0000000..3b0d026 --- /dev/null +++ b/cpu/bf537/i2c.c @@ -0,0 +1,460 @@ +/**************************************************************** + * $ID: i2c.c 24 Oct 2006 12:00:00 +0800 $ * + * * + * Description: * + * * + * Maintainer: sonicz <sonic.zhang@analog.com> * + * * + * CopyRight (c) 2006 Analog Device * + * All rights reserved. * + * * + * This file is free software; * + * you are free to modify and/or redistribute it * + * under the terms of the GNU General Public Licence (GPL).* + * * + ****************************************************************/ + +#include <common.h> + +#ifdef CONFIG_HARD_I2C + +#include <asm/blackfin.h> +#include <i2c.h> +#include <asm/io.h> + +#define bfin_read16(addr) ({ unsigned __v; \ + __asm__ __volatile__ (\ + "%0 = w[%1] (z);\n\t"\ + : "=d"(__v) : "a"(addr)); (unsigned short)__v; }) + +#define bfin_write16(addr,val) ({\ + __asm__ __volatile__ (\ + "w[%0] = %1;\n\t"\ + : : "a"(addr) , "d"(val) : "memory");}) + +/* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */ +#define bfin_read_TWI_CLKDIV() bfin_read16(TWI_CLKDIV) +#define bfin_write_TWI_CLKDIV(val) bfin_write16(TWI_CLKDIV,val) +#define bfin_read_TWI_CONTROL() bfin_read16(TWI_CONTROL) +#define bfin_write_TWI_CONTROL(val) bfin_write16(TWI_CONTROL,val) +#define bfin_read_TWI_SLAVE_CTL() bfin_read16(TWI_SLAVE_CTL) +#define bfin_write_TWI_SLAVE_CTL(val) bfin_write16(TWI_SLAVE_CTL,val) +#define bfin_read_TWI_SLAVE_STAT() bfin_read16(TWI_SLAVE_STAT) +#define bfin_write_TWI_SLAVE_STAT(val) bfin_write16(TWI_SLAVE_STAT,val) +#define bfin_read_TWI_SLAVE_ADDR() bfin_read16(TWI_SLAVE_ADDR) +#define bfin_write_TWI_SLAVE_ADDR(val) bfin_write16(TWI_SLAVE_ADDR,val) +#define bfin_read_TWI_MASTER_CTL() bfin_read16(TWI_MASTER_CTL) +#define bfin_write_TWI_MASTER_CTL(val) bfin_write16(TWI_MASTER_CTL,val) +#define bfin_read_TWI_MASTER_STAT() bfin_read16(TWI_MASTER_STAT) +#define bfin_write_TWI_MASTER_STAT(val) bfin_write16(TWI_MASTER_STAT,val) +#define bfin_read_TWI_MASTER_ADDR() bfin_read16(TWI_MASTER_ADDR) +#define bfin_write_TWI_MASTER_ADDR(val) bfin_write16(TWI_MASTER_ADDR,val) +#define bfin_read_TWI_INT_STAT() bfin_read16(TWI_INT_STAT) +#define bfin_write_TWI_INT_STAT(val) bfin_write16(TWI_INT_STAT,val) +#define bfin_read_TWI_INT_MASK() bfin_read16(TWI_INT_MASK) +#define bfin_write_TWI_INT_MASK(val) bfin_write16(TWI_INT_MASK,val) +#define bfin_read_TWI_FIFO_CTL() bfin_read16(TWI_FIFO_CTL) +#define bfin_write_TWI_FIFO_CTL(val) bfin_write16(TWI_FIFO_CTL,val) +#define bfin_read_TWI_FIFO_STAT() bfin_read16(TWI_FIFO_STAT) +#define bfin_write_TWI_FIFO_STAT(val) bfin_write16(TWI_FIFO_STAT,val) +#define bfin_read_TWI_XMT_DATA8() bfin_read16(TWI_XMT_DATA8) +#define bfin_write_TWI_XMT_DATA8(val) bfin_write16(TWI_XMT_DATA8,val) +#define bfin_read_TWI_XMT_DATA16() bfin_read16(TWI_XMT_DATA16) +#define bfin_write_TWI_XMT_DATA16(val) bfin_write16(TWI_XMT_DATA16,val) +#define bfin_read_TWI_RCV_DATA8() bfin_read16(TWI_RCV_DATA8) +#define bfin_write_TWI_RCV_DATA8(val) bfin_write16(TWI_RCV_DATA8,val) +#define bfin_read_TWI_RCV_DATA16() bfin_read16(TWI_RCV_DATA16) +#define bfin_write_TWI_RCV_DATA16(val) bfin_write16(TWI_RCV_DATA16,val) + +#ifdef DEBUG_I2C +#define PRINTD(fmt,args...) do { \ + DECLARE_GLOBAL_DATA_PTR; \ + if (gd->have_console) \ + printf(fmt ,##args); \ + } while (0) +#else +#define PRINTD(fmt,args...) +#endif + +#ifndef CONFIG_TWICLK_KHZ +#define CONFIG_TWICLK_KHZ 50 +#endif + +/* All transfers are described by this data structure */ +struct i2c_msg { + u16 addr; /* slave address */ + u16 flags; +#define I2C_M_STOP 0x2 +#define I2C_M_RD 0x1 + u16 len; /* msg length */ + u8 *buf; /* pointer to msg data */ +}; + +/** + * i2c_reset: - reset the host controller + * + */ + +static void i2c_reset(void) +{ + /* Disable TWI */ + bfin_write_TWI_CONTROL(0); + sync(); + + /* Set TWI internal clock as 10MHz */ + bfin_write_TWI_CONTROL(((get_sclk() / 1024 / 1024 + 5) / 10) & 0x7F); + + /* Set Twi interface clock as specified */ + if (CONFIG_TWICLK_KHZ > 400) + bfin_write_TWI_CLKDIV(((5 * 1024 / 400) << 8) | ((5 * 1024 / + 400) & 0xFF)); + else + bfin_write_TWI_CLKDIV(((5 * 1024 / + CONFIG_TWICLK_KHZ) << 8) | ((5 * 1024 / + CONFIG_TWICLK_KHZ) + & 0xFF)); + + /* Enable TWI */ + bfin_write_TWI_CONTROL(bfin_read_TWI_CONTROL() | TWI_ENA); + sync(); +} + +int wait_for_completion(struct i2c_msg *msg, int timeout_count) +{ + unsigned short twi_int_stat; + unsigned short mast_stat; + int i; + + for (i = 0; i < timeout_count; i++) { + twi_int_stat = bfin_read_TWI_INT_STAT(); + mast_stat = bfin_read_TWI_MASTER_STAT(); + + if (XMTSERV & twi_int_stat) { + /* Transmit next data */ + if (msg->len > 0) { + bfin_write_TWI_XMT_DATA8(*(msg->buf++)); + msg->len--; + } else if (msg->flags & I2C_M_STOP) + bfin_write_TWI_MASTER_CTL + (bfin_read_TWI_MASTER_CTL() | STOP); + sync(); + /* Clear status */ + bfin_write_TWI_INT_STAT(XMTSERV); + sync(); + i = 0; + } + if (RCVSERV & twi_int_stat) { + if (msg->len > 0) { + /* Receive next data */ + *(msg->buf++) = bfin_read_TWI_RCV_DATA8(); + msg->len--; + } else if (msg->flags & I2C_M_STOP) { + bfin_write_TWI_MASTER_CTL + (bfin_read_TWI_MASTER_CTL() | STOP); + sync(); + } + /* Clear interrupt source */ + bfin_write_TWI_INT_STAT(RCVSERV); + sync(); + i = 0; + } + if (MERR & twi_int_stat) { + bfin_write_TWI_INT_STAT(MERR); + bfin_write_TWI_INT_MASK(0); + bfin_write_TWI_MASTER_STAT(0x3e); + bfin_write_TWI_MASTER_CTL(0); + sync(); + /* + * if both err and complete int stats are set, + * return proper results. + */ + if (MCOMP & twi_int_stat) { + bfin_write_TWI_INT_STAT(MCOMP); + bfin_write_TWI_INT_MASK(0); + bfin_write_TWI_MASTER_CTL(0); + sync(); + /* + * If it is a quick transfer, + * only address bug no data, not an err. + */ + if (msg->len == 0 && mast_stat & BUFRDERR) + return 0; + /* + * If address not acknowledged return -3, + * else return 0. + */ + else if (!(mast_stat & ANAK)) + return 0; + else + return -3; + } + return -1; + } + if (MCOMP & twi_int_stat) { + bfin_write_TWI_INT_STAT(MCOMP); + sync(); + bfin_write_TWI_INT_MASK(0); + bfin_write_TWI_MASTER_CTL(0); + sync(); + return 0; + } + } + if (msg->flags & I2C_M_RD) + return -4; + else + return -2; +} + +/** + * i2c_transfer: - Transfer one byte over the i2c bus + * + * This function can tranfer a byte over the i2c bus in both directions. + * It is used by the public API functions. + * + * @return: 0: transfer successful + * -1: transfer fail + * -2: transmit timeout + * -3: ACK missing + * -4: receive timeout + * -5: controller not ready + */ +int i2c_transfer(struct i2c_msg *msg) +{ + int ret = 0; + int timeout_count = 10000; + int len = msg->len; + + if (!(bfin_read_TWI_CONTROL() & TWI_ENA)) { + ret = -5; + goto transfer_error; + } + + while (bfin_read_TWI_MASTER_STAT() & BUSBUSY) ; + + /* Set Transmit device address */ + bfin_write_TWI_MASTER_ADDR(msg->addr); + + /* + * FIFO Initiation. + * Data in FIFO should be discarded before start a new operation. + */ + bfin_write_TWI_FIFO_CTL(0x3); + sync(); + bfin_write_TWI_FIFO_CTL(0); + sync(); + + if (!(msg->flags & I2C_M_RD)) { + /* Transmit first data */ + if (msg->len > 0) { + PRINTD("1 in i2c_transfer: buf=%d, len=%d\n", *msg->buf, + len); + bfin_write_TWI_XMT_DATA8(*(msg->buf++)); + msg->len--; + sync(); + } + } + + /* clear int stat */ + bfin_write_TWI_INT_STAT(MERR | MCOMP | XMTSERV | RCVSERV); + + /* Interrupt mask . Enable XMT, RCV interrupt */ + bfin_write_TWI_INT_MASK(MCOMP | MERR | + ((msg->flags & I2C_M_RD) ? RCVSERV : XMTSERV)); + sync(); + + if (len > 0 && len <= 255) + bfin_write_TWI_MASTER_CTL((len << 6)); + else if (msg->len > 255) { + bfin_write_TWI_MASTER_CTL((0xff << 6)); + msg->flags &= I2C_M_STOP; + } else + bfin_write_TWI_MASTER_CTL(0); + + /* Master enable */ + bfin_write_TWI_MASTER_CTL(bfin_read_TWI_MASTER_CTL() | MEN | + ((msg->flags & I2C_M_RD) + ? MDIR : 0) | ((CONFIG_TWICLK_KHZ > + 100) ? FAST : 0)); + sync(); + + ret = wait_for_completion(msg, timeout_count); + PRINTD("3 in i2c_transfer: ret=%d\n", ret); + +transfer_error: + switch (ret) { + case 1: + PRINTD(("i2c_transfer: error: transfer fail\n")); + break; + case 2: + PRINTD(("i2c_transfer: error: transmit timeout\n")); + break; + case 3: + PRINTD(("i2c_transfer: error: ACK missing\n")); + break; + case 4: + PRINTD(("i2c_transfer: error: receive timeout\n")); + break; + case 5: + PRINTD(("i2c_transfer: error: controller not ready\n")); + i2c_reset(); + break; + default: + break; + } + return ret; + +} + +/* ---------------------------------------------------------------------*/ +/* API Functions */ +/* ---------------------------------------------------------------------*/ + +void i2c_init(int speed, int slaveaddr) +{ + i2c_reset(); +} + +/** + * i2c_probe: - Test if a chip answers for a given i2c address + * + * @chip: address of the chip which is searched for + * @return: 0 if a chip was found, -1 otherwhise + */ + +int i2c_probe(uchar chip) +{ + struct i2c_msg msg; + u8 probebuf; + + i2c_reset(); + + probebuf = 0; + msg.addr = chip; + msg.flags = 0; + msg.len = 1; + msg.buf = &probebuf; + if (i2c_transfer(&msg)) + return -1; + + msg.addr = chip; + msg.flags = I2C_M_RD; + msg.len = 1; + msg.buf = &probebuf; + if (i2c_transfer(&msg)) + return -1; + + return 0; +} + +/** + * i2c_read: - Read multiple bytes from an i2c device + * + * chip: I2C chip address, range 0..127 + * addr: Memory (register) address within the chip + * alen: Number of bytes to use for addr (typically 1, 2 for larger + * memories, 0 for register type devices with only one + * register) + * buffer: Where to read/write the data + * len: How many bytes to read/write + * + * Returns: 0 on success, not 0 on failure + */ + +int i2c_read(uchar chip, uint addr, int alen, uchar * buffer, int len) +{ + struct i2c_msg msg; + u8 addr_bytes[3]; /* lowest...highest byte of data address */ + + PRINTD("i2c_read: chip=0x%x, addr=0x%x, alen=0x%x, len=0x%x\n", chip, + addr, alen, len); + + if (alen > 0) { + addr_bytes[0] = (u8) ((addr >> 0) & 0x000000FF); + addr_bytes[1] = (u8) ((addr >> 8) & 0x000000FF); + addr_bytes[2] = (u8) ((addr >> 16) & 0x000000FF); + msg.addr = chip; + msg.flags = 0; + msg.len = alen; + msg.buf = addr_bytes; + if (i2c_transfer(&msg)) + return -1; + } + + /* start read sequence */ + PRINTD(("i2c_read: start read sequence\n")); + msg.addr = chip; + msg.flags = I2C_M_RD; + msg.len = len; + msg.buf = buffer; + if (i2c_transfer(&msg)) + return -1; + + return 0; +} + +/** + * i2c_write: - Write multiple bytes to an i2c device + * + * chip: I2C chip address, range 0..127 + * addr: Memory (register) address within the chip + * alen: Number of bytes to use for addr (typically 1, 2 for larger + * memories, 0 for register type devices with only one + * register) + * buffer: Where to read/write the data + * len: How many bytes to read/write + * + * Returns: 0 on success, not 0 on failure + */ + +int i2c_write(uchar chip, uint addr, int alen, uchar * buffer, int len) +{ + struct i2c_msg msg; + u8 addr_bytes[3]; /* lowest...highest byte of data address */ + + PRINTD + ("i2c_write: chip=0x%x, addr=0x%x, alen=0x%x, len=0x%x, buf0=0x%x\n", + chip, addr, alen, len, buffer[0]); + + /* chip address write */ + if (alen > 0) { + addr_bytes[0] = (u8) ((addr >> 0) & 0x000000FF); + addr_bytes[1] = (u8) ((addr >> 8) & 0x000000FF); + addr_bytes[2] = (u8) ((addr >> 16) & 0x000000FF); + msg.addr = chip; + msg.flags = 0; + msg.len = alen; + msg.buf = addr_bytes; + if (i2c_transfer(&msg)) + return -1; + } + + /* start read sequence */ + PRINTD(("i2c_write: start write sequence\n")); + msg.addr = chip; + msg.flags = 0; + msg.len = len; + msg.buf = buffer; + if (i2c_transfer(&msg)) + return -1; + + return 0; + +} + +uchar i2c_reg_read(uchar chip, uchar reg) +{ + uchar buf; + + PRINTD("i2c_reg_read: chip=0x%02x, reg=0x%02x\n", chip, reg); + i2c_read(chip, reg, 0, &buf, 1); + return (buf); +} + +void i2c_reg_write(uchar chip, uchar reg, uchar val) +{ + PRINTD("i2c_reg_write: chip=0x%02x, reg=0x%02x, val=0x%02x\n", chip, + reg, val); + i2c_write(chip, reg, 0, &val, 1); +} + +#endif /* CONFIG_HARD_I2C */ diff --git a/cpu/bf537/init_sdram.S b/cpu/bf537/init_sdram.S new file mode 100644 index 0000000..897a589 --- /dev/null +++ b/cpu/bf537/init_sdram.S @@ -0,0 +1,174 @@ +#define ASSEMBLY + +#include <linux/config.h> +#include <config.h> +#include <asm/blackfin.h> +#include <asm/mem_init.h> +.global init_sdram; + +#if (BFIN_BOOT_MODE != BF537_UART_BOOT) +#if (CONFIG_CCLK_DIV == 1) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV1 +#endif +#if (CONFIG_CCLK_DIV == 2) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV2 +#endif +#if (CONFIG_CCLK_DIV == 4) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV4 +#endif +#if (CONFIG_CCLK_DIV == 8) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV8 +#endif +#ifndef CONFIG_CCLK_ACT_DIV +#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly +#endif +#endif + +init_sdram: + [--SP] = ASTAT; + [--SP] = RETS; + [--SP] = (R7:0); + [--SP] = (P5:0); + +#if (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT) + p0.h = hi(SIC_IWR); + p0.l = lo(SIC_IWR); + r0.l = 0x1; + w[p0] = r0.l; + SSYNC; + + p0.h = hi(SPI_BAUD); + p0.l = lo(SPI_BAUD); + r0.l = CONFIG_SPI_BAUD; + w[p0] = r0.l; + SSYNC; +#endif + +#if (BFIN_BOOT_MODE != BF537_UART_BOOT) + +#ifdef CONFIG_BF537 + /* Enable PHY CLK buffer output */ + p0.h = hi(VR_CTL); + p0.l = lo(VR_CTL); + r0.l = w[p0]; + bitset(r0, 14); + w[p0] = r0.l; + ssync; +#endif + /* + * PLL_LOCKCNT - how many SCLK Cycles to delay while PLL becomes stable + */ + p0.h = hi(PLL_LOCKCNT); + p0.l = lo(PLL_LOCKCNT); + r0 = 0x300(Z); + w[p0] = r0.l; + ssync; + + /* + * Put SDRAM in self-refresh, incase anything is running + */ + P2.H = hi(EBIU_SDGCTL); + P2.L = lo(EBIU_SDGCTL); + R0 = [P2]; + BITSET (R0, 24); + [P2] = R0; + SSYNC; + + /* + * Set PLL_CTL with the value that we calculate in R0 + * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors + * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK + * - [7] = output delay (add 200ps of delay to mem signals) + * - [6] = input delay (add 200ps of input delay to mem signals) + * - [5] = PDWN : 1=All Clocks off + * - [3] = STOPCK : 1=Core Clock off + * - [1] = PLL_OFF : 1=Disable Power to PLL + * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL + * all other bits set to zero + */ + + r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */ + r0 = r0 << 9; /* Shift it over */ + r1 = CONFIG_CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/ + r0 = r1 | r0; + r1 = CONFIG_PLL_BYPASS; /* Bypass the PLL? */ + r1 = r1 << 8; /* Shift it over */ + r0 = r1 | r0; /* add them all together */ + + p0.h = hi(PLL_CTL); + p0.l = lo(PLL_CTL); /* Load the address */ + cli r2; /* Disable interrupts */ + ssync; + w[p0] = r0.l; /* Set the value */ + idle; /* Wait for the PLL to stablize */ + sti r2; /* Enable interrupts */ + +check_again: + p0.h = hi(PLL_STAT); + p0.l = lo(PLL_STAT); + R0 = W[P0](Z); + CC = BITTST(R0,5); + if ! CC jump check_again; + + /* Configure SCLK & CCLK Dividers */ + r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); + p0.h = hi(PLL_DIV); + p0.l = lo(PLL_DIV); + w[p0] = r0.l; + ssync; +#endif + + /* + * Now, Initialize the SDRAM, + * start with the SDRAM Refresh Rate Control Register + */ + p0.l = lo(EBIU_SDRRC); + p0.h = hi(EBIU_SDRRC); + r0 = mem_SDRRC; + w[p0] = r0.l; + ssync; + + /* + * SDRAM Memory Bank Control Register - bank specific parameters + */ + p0.l = (EBIU_SDBCTL & 0xFFFF); + p0.h = (EBIU_SDBCTL >> 16); + r0 = mem_SDBCTL; + w[p0] = r0.l; + ssync; + + /* + * SDRAM Global Control Register - global programmable parameters + * Disable self-refresh + */ + P2.H = hi(EBIU_SDGCTL); + P2.L = lo(EBIU_SDGCTL); + R0 = [P2]; + BITCLR (R0, 24); + + /* + * Check if SDRAM is already powered up, if it is, enable self-refresh + */ + p0.h = hi(EBIU_SDSTAT); + p0.l = lo(EBIU_SDSTAT); + r2.l = w[p0]; + cc = bittst(r2,3); + if !cc jump skip; + NOP; + BITSET (R0, 23); +skip: + [P2] = R0; + SSYNC; + + /* Write in the new value in the register */ + R0.L = lo(mem_SDGCTL); + R0.H = hi(mem_SDGCTL); + [P2] = R0; + SSYNC; + nop; + + (P5:0) = [SP++]; + (R7:0) = [SP++]; + RETS = [SP++]; + ASTAT = [SP++]; + RTS; diff --git a/cpu/bf537/init_sdram_bootrom_initblock.S b/cpu/bf537/init_sdram_bootrom_initblock.S new file mode 100644 index 0000000..f9adbb9 --- /dev/null +++ b/cpu/bf537/init_sdram_bootrom_initblock.S @@ -0,0 +1,199 @@ +#define ASSEMBLY + +#include <linux/config.h> +#include <config.h> +#include <asm/blackfin.h> +#include <asm/mem_init.h> +.global init_sdram; + +#if (BFIN_BOOT_MODE != BF537_UART_BOOT) +#if (CONFIG_CCLK_DIV == 1) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV1 +#endif +#if (CONFIG_CCLK_DIV == 2) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV2 +#endif +#if (CONFIG_CCLK_DIV == 4) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV4 +#endif +#if (CONFIG_CCLK_DIV == 8) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV8 +#endif +#ifndef CONFIG_CCLK_ACT_DIV +#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly +#endif +#endif + +init_sdram: + [--SP] = ASTAT; + [--SP] = RETS; + [--SP] = (R7:0); + [--SP] = (P5:0); + +#if (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT) + p0.h = hi(SIC_IWR); + p0.l = lo(SIC_IWR); + r0.l = 0x1; + w[p0] = r0.l; + SSYNC; + + p0.h = hi(SPI_BAUD); + p0.l = lo(SPI_BAUD); + r0.l = CONFIG_SPI_BAUD_INITBLOCK; + w[p0] = r0.l; + SSYNC; +#endif + +#if (BFIN_BOOT_MODE != BF537_UART_BOOT) + +#ifdef CONFIG_BF537 + /* Enable PHY CLK buffer output */ + p0.h = hi(VR_CTL); + p0.l = lo(VR_CTL); + r0.l = w[p0]; + bitset(r0, 14); + w[p0] = r0.l; + ssync; +#endif + /* + * PLL_LOCKCNT - how many SCLK Cycles to delay while PLL becomes stable + */ + p0.h = hi(PLL_LOCKCNT); + p0.l = lo(PLL_LOCKCNT); + r0 = 0x300(Z); + w[p0] = r0.l; + ssync; + + /* + * Put SDRAM in self-refresh, incase anything is running + */ + P2.H = hi(EBIU_SDGCTL); + P2.L = lo(EBIU_SDGCTL); + R0 = [P2]; + BITSET (R0, 24); + [P2] = R0; + SSYNC; + + /* + * Set PLL_CTL with the value that we calculate in R0 + * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors + * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK + * - [7] = output delay (add 200ps of delay to mem signals) + * - [6] = input delay (add 200ps of input delay to mem signals) + * - [5] = PDWN : 1=All Clocks off + * - [3] = STOPCK : 1=Core Clock off + * - [1] = PLL_OFF : 1=Disable Power to PLL + * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL + * all other bits set to zero + */ + + r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */ + r0 = r0 << 9; /* Shift it over */ + r1 = CONFIG_CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/ + r0 = r1 | r0; + r1 = CONFIG_PLL_BYPASS; /* Bypass the PLL? */ + r1 = r1 << 8; /* Shift it over */ + r0 = r1 | r0; /* add them all together */ + + p0.h = hi(PLL_CTL); + p0.l = lo(PLL_CTL); /* Load the address */ + cli r2; /* Disable interrupts */ + ssync; + w[p0] = r0.l; /* Set the value */ + idle; /* Wait for the PLL to stablize */ + sti r2; /* Enable interrupts */ + +check_again: + p0.h = hi(PLL_STAT); + p0.l = lo(PLL_STAT); + R0 = W[P0](Z); + CC = BITTST(R0,5); + if ! CC jump check_again; + + /* Configure SCLK & CCLK Dividers */ + r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); + p0.h = hi(PLL_DIV); + p0.l = lo(PLL_DIV); + w[p0] = r0.l; + ssync; +#endif + + /* + * We now are running at speed, time to set the Async mem bank wait states + * This will speed up execution, since we are normally running from FLASH. + */ + + p2.h = (EBIU_AMBCTL1 >> 16); + p2.l = (EBIU_AMBCTL1 & 0xFFFF); + r0.h = (AMBCTL1VAL >> 16); + r0.l = (AMBCTL1VAL & 0xFFFF); + [p2] = r0; + ssync; + + p2.h = (EBIU_AMBCTL0 >> 16); + p2.l = (EBIU_AMBCTL0 & 0xFFFF); + r0.h = (AMBCTL0VAL >> 16); + r0.l = (AMBCTL0VAL & 0xFFFF); + [p2] = r0; + ssync; + + p2.h = (EBIU_AMGCTL >> 16); + p2.l = (EBIU_AMGCTL & 0xffff); + r0 = AMGCTLVAL; + w[p2] = r0; + ssync; + + /* + * Now, Initialize the SDRAM, + * start with the SDRAM Refresh Rate Control Register + */ + p0.l = lo(EBIU_SDRRC); + p0.h = hi(EBIU_SDRRC); + r0 = mem_SDRRC; + w[p0] = r0.l; + ssync; + + /* + * SDRAM Memory Bank Control Register - bank specific parameters + */ + p0.l = (EBIU_SDBCTL & 0xFFFF); + p0.h = (EBIU_SDBCTL >> 16); + r0 = mem_SDBCTL; + w[p0] = r0.l; + ssync; + + /* + * SDRAM Global Control Register - global programmable parameters + * Disable self-refresh + */ + P2.H = hi(EBIU_SDGCTL); + P2.L = lo(EBIU_SDGCTL); + R0 = [P2]; + BITCLR (R0, 24); + + /* + * Check if SDRAM is already powered up, if it is, enable self-refresh + */ + p0.h = hi(EBIU_SDSTAT); + p0.l = lo(EBIU_SDSTAT); + r2.l = w[p0]; + cc = bittst(r2,3); + if !cc jump skip; + NOP; + BITSET (R0, 23); +skip: + [P2] = R0; + SSYNC; + + /* Write in the new value in the register */ + R0.L = lo(mem_SDGCTL); + R0.H = hi(mem_SDGCTL); + [P2] = R0; + SSYNC; + nop; + + (P5:0) = [SP++]; + (R7:0) = [SP++]; + RETS = [SP++]; + ASTAT = [SP++]; + RTS; diff --git a/cpu/bf537/interrupt.S b/cpu/bf537/interrupt.S new file mode 100644 index 0000000..a8be34f --- /dev/null +++ b/cpu/bf537/interrupt.S @@ -0,0 +1,246 @@ +/* + * U-boot - interrupt.S Processing of interrupts and exception handling + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * This file is based on interrupt.S + * + * Copyright (C) 2003 Metrowerks, Inc. <mwaddel@metrowerks.com> + * Copyright (C) 2002 Arcturus Networks Ltd. Ted Ma <mated@sympatico.ca> + * Copyright (C) 1998 D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>, + * Kenneth Albanowski <kjahds@kjahds.com>, + * The Silver Hammer Group, Ltd. + * + * (c) 1995, Dionne & Associates + * (c) 1995, DKG Display Tech. + * + * This file is also based on exception.asm + * (C) Copyright 2001-2005 - Analog Devices, Inc. All rights reserved. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#define ASSEMBLY +#include <config.h> +#include <asm/blackfin.h> +#include <asm/hw_irq.h> +#include <asm/entry.h> +#include <asm/blackfin_defs.h> + +.global _blackfin_irq_panic; + +.text +.align 2 + +#ifndef CONFIG_KGDB +.global _evt_emulation +_evt_emulation: + SAVE_CONTEXT + r0 = IRQ_EMU; + r1 = seqstat; + sp += -12; + call _blackfin_irq_panic; + sp += 12; + rte; +#endif + +.global _evt_nmi +_evt_nmi: + SAVE_CONTEXT + r0 = IRQ_NMI; + r1 = RETN; + sp += -12; + call _blackfin_irq_panic; + sp += 12; + +_evt_nmi_exit: + rtn; + +.global _trap +_trap: + SAVE_ALL_SYS + r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */ + sp += -12; + call _trap_c + sp += 12; + RESTORE_ALL_SYS + rtx; + +.global _evt_rst +_evt_rst: + SAVE_CONTEXT + r0 = IRQ_RST; + r1 = RETN; + sp += -12; + call _do_reset; + sp += 12; + +_evt_rst_exit: + rtn; + +irq_panic: + r0 = IRQ_EVX; + r1 = sp; + sp += -12; + call _blackfin_irq_panic; + sp += 12; + +.global _evt_ivhw +_evt_ivhw: + SAVE_CONTEXT + RAISE 14; + +_evt_ivhw_exit: + rti; + +.global _evt_timer +_evt_timer: + SAVE_CONTEXT + r0 = IRQ_CORETMR; + sp += -12; + /* Polling method used now. */ + /* call timer_int; */ + sp += 12; + RESTORE_CONTEXT + rti; + nop; + +.global _evt_evt7 +_evt_evt7: + SAVE_CONTEXT + r0 = 7; + sp += -12; + call _process_int; + sp += 12; + +evt_evt7_exit: + RESTORE_CONTEXT + rti; + +.global _evt_evt8 +_evt_evt8: + SAVE_CONTEXT + r0 = 8; + sp += -12; + call _process_int; + sp += 12; + +evt_evt8_exit: + RESTORE_CONTEXT + rti; + +.global _evt_evt9 +_evt_evt9: + SAVE_CONTEXT + r0 = 9; + sp += -12; + call _process_int; + sp += 12; + +evt_evt9_exit: + RESTORE_CONTEXT + rti; + +.global _evt_evt10 +_evt_evt10: + SAVE_CONTEXT + r0 = 10; + sp += -12; + call _process_int; + sp += 12; + +evt_evt10_exit: + RESTORE_CONTEXT + rti; + +.global _evt_evt11 +_evt_evt11: + SAVE_CONTEXT + r0 = 11; + sp += -12; + call _process_int; + sp += 12; + +evt_evt11_exit: + RESTORE_CONTEXT + rti; + +.global _evt_evt12 +_evt_evt12: + SAVE_CONTEXT + r0 = 12; + sp += -12; + call _process_int; + sp += 12; +evt_evt12_exit: + RESTORE_CONTEXT + rti; + +.global _evt_evt13 +_evt_evt13: + SAVE_CONTEXT + r0 = 13; + sp += -12; + call _process_int; + sp += 12; + +evt_evt13_exit: + RESTORE_CONTEXT + rti; + +.global _evt_system_call +_evt_system_call: + [--sp] = r0; + [--SP] = RETI; + r0 = [sp++]; + r0 += 2; + [--sp] = r0; + RETI = [SP++]; + r0 = [SP++]; + SAVE_CONTEXT + sp += -12; + call _exception_handle; + sp += 12; + RESTORE_CONTEXT + RTI; + +evt_system_call_exit: + rti; + +.global _evt_soft_int1 +_evt_soft_int1: + [--sp] = r0; + [--SP] = RETI; + r0 = [sp++]; + r0 += 2; + [--sp] = r0; + RETI = [SP++]; + r0 = [SP++]; + SAVE_CONTEXT + sp += -12; + call _exception_handle; + sp += 12; + RESTORE_CONTEXT + RTI; + +evt_soft_int1_exit: + rti; diff --git a/cpu/bf537/interrupts.c b/cpu/bf537/interrupts.c new file mode 100644 index 0000000..2ca76ec --- /dev/null +++ b/cpu/bf537/interrupts.c @@ -0,0 +1,174 @@ +/* + * U-boot - interrupts.c Interrupt related routines + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * This file is based on interrupts.c + * Copyright 1996 Roman Zippel + * Copyright 1999 D. Jeff Dionne <jeff@uclinux.org> + * Copyright 2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca> + * Copyright 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca> + * Copyright 2003 Metrowerks/Motorola + * Copyright 2003 Bas Vermeulen <bas@buyways.nl>, + * BuyWays B.V. (www.buyways.nl) + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/machdep.h> +#include <asm/irq.h> +#include <config.h> +#include <asm/blackfin.h> +#include "cpu.h" + +static ulong timestamp; +static ulong last_time; +static int int_flag; + +int irq_flags; /* needed by asm-blackfin/system.h */ + +/* Functions just to satisfy the linker */ + +/* + * This function is derived from PowerPC code (read timebase as long long). + * On BF533 it just returns the timer value. + */ +unsigned long long get_ticks(void) +{ + return get_timer(0); +} + +/* + * This function is derived from PowerPC code (timebase clock frequency). + * On BF533 it returns the number of timer ticks per second. + */ +ulong get_tbclk (void) +{ + ulong tbclk; + + tbclk = CFG_HZ; + return tbclk; +} + +void enable_interrupts(void) +{ + restore_flags(int_flag); +} + +int disable_interrupts(void) +{ + save_and_cli(int_flag); + return 1; +} + +int interrupt_init(void) +{ + return (0); +} + +void udelay(unsigned long usec) +{ + unsigned long delay, start, stop; + unsigned long cclk; + cclk = (CONFIG_CCLK_HZ); + + while (usec > 1) { + /* + * how many clock ticks to delay? + * - request(in useconds) * clock_ticks(Hz) / useconds/second + */ + if (usec < 1000) { + delay = (usec * (cclk / 244)) >> 12; + usec = 0; + } else { + delay = (1000 * (cclk / 244)) >> 12; + usec -= 1000; + } + + asm volatile (" %0 = CYCLES;":"=r" (start)); + do { + asm volatile (" %0 = CYCLES; ":"=r" (stop)); + } while (stop - start < delay); + } + + return; +} + +void timer_init(void) +{ + *pTCNTL = 0x1; + *pTSCALE = 0x0; + *pTCOUNT = MAX_TIM_LOAD; + *pTPERIOD = MAX_TIM_LOAD; + *pTCNTL = 0x7; + asm("CSYNC;"); + + timestamp = 0; + last_time = 0; +} + +/* Any network command or flash + * command is started get_timer shall + * be called before TCOUNT gets reset, + * to implement the accurate timeouts. + * + * How ever milliconds doesn't return + * the number that has been elapsed from + * the last reset. + * + * As get_timer is used in the u-boot + * only for timeouts this should be + * sufficient + */ +ulong get_timer(ulong base) +{ + ulong milisec; + + /* Number of clocks elapsed */ + ulong clocks = (MAX_TIM_LOAD - (*pTCOUNT)); + + /** + * Find if the TCOUNT is reset + * timestamp gives the number of times + * TCOUNT got reset + */ + if (clocks < last_time) + timestamp++; + last_time = clocks; + + /* Get the number of milliseconds */ + milisec = clocks / (CONFIG_CCLK_HZ / 1000); + + /** + * Find the number of millisonds + * that got elapsed before this TCOUNT cycle + */ + milisec += timestamp * (MAX_TIM_LOAD / (CONFIG_CCLK_HZ / 1000)); + + return (milisec - base); +} + +void reset_timer (void) +{ + timestamp = 0; +} diff --git a/cpu/bf537/ints.c b/cpu/bf537/ints.c new file mode 100644 index 0000000..f476f14 --- /dev/null +++ b/cpu/bf537/ints.c @@ -0,0 +1,117 @@ +/* + * U-boot - ints.c Interrupt related routines + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * This file is based on ints.c + * + * Apr18 2003, Changed by HuTao to support interrupt cascading for Blackfin + * drivers + * + * Copyright 1996 Roman Zippel + * Copyright 1999 D. Jeff Dionne <jeff@uclinux.org> + * Copyright 2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca> + * Copyright 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca> + * Copyright 2003 Metrowerks/Motorola + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <linux/stddef.h> +#include <asm/system.h> +#include <asm/irq.h> +#include <asm/traps.h> +#include <asm/io.h> +#include <asm/errno.h> +#include <asm/machdep.h> +#include <asm/setup.h> +#include <asm/blackfin.h> +#include "cpu.h" + +void blackfin_irq_panic(int reason, struct pt_regs *regs) +{ + printf("\n\nException: IRQ 0x%x entered\n", reason); + printf("code=[0x%x], ", (unsigned int)(regs->seqstat & 0x3f)); + printf("stack frame=0x%x, ", (unsigned int)regs); + printf("bad PC=0x%04x\n", (unsigned int)regs->pc); + dump(regs); + printf("Unhandled IRQ or exceptions!\n"); + printf("Please reset the board \n"); +} + +void blackfin_init_IRQ(void) +{ + *(unsigned volatile long *)(SIC_IMASK) = SIC_UNMASK_ALL; + cli(); +#ifndef CONFIG_KGDB + *(unsigned volatile long *)(EVT_EMULATION_ADDR) = 0x0; +#endif + *(unsigned volatile long *)(EVT_NMI_ADDR) = + (unsigned volatile long)evt_nmi; + *(unsigned volatile long *)(EVT_EXCEPTION_ADDR) = + (unsigned volatile long)trap; + *(unsigned volatile long *)(EVT_HARDWARE_ERROR_ADDR) = + (unsigned volatile long)evt_ivhw; + *(unsigned volatile long *)(EVT_RESET_ADDR) = + (unsigned volatile long)evt_rst; + *(unsigned volatile long *)(EVT_TIMER_ADDR) = + (unsigned volatile long)evt_timer; + *(unsigned volatile long *)(EVT_IVG7_ADDR) = + (unsigned volatile long)evt_evt7; + *(unsigned volatile long *)(EVT_IVG8_ADDR) = + (unsigned volatile long)evt_evt8; + *(unsigned volatile long *)(EVT_IVG9_ADDR) = + (unsigned volatile long)evt_evt9; + *(unsigned volatile long *)(EVT_IVG10_ADDR) = + (unsigned volatile long)evt_evt10; + *(unsigned volatile long *)(EVT_IVG11_ADDR) = + (unsigned volatile long)evt_evt11; + *(unsigned volatile long *)(EVT_IVG12_ADDR) = + (unsigned volatile long)evt_evt12; + *(unsigned volatile long *)(EVT_IVG13_ADDR) = + (unsigned volatile long)evt_evt13; + *(unsigned volatile long *)(EVT_IVG14_ADDR) = + (unsigned volatile long)evt_system_call; + *(unsigned volatile long *)(EVT_IVG15_ADDR) = + (unsigned volatile long)evt_soft_int1; + *(volatile unsigned long *)ILAT = 0; + asm("csync;"); + sti(); + *(volatile unsigned long *)IMASK = 0xffbf; + asm("csync;"); +} + +void exception_handle(void) +{ +#if defined (CONFIG_PANIC_HANG) + display_excp(); +#else + udelay(100000); /* allow messages to go out */ + do_reset(NULL, 0, 0, NULL); +#endif +} + +void display_excp(void) +{ + printf("Exception!\n"); +} diff --git a/cpu/bf537/serial.c b/cpu/bf537/serial.c new file mode 100644 index 0000000..dd4f916 --- /dev/null +++ b/cpu/bf537/serial.c @@ -0,0 +1,194 @@ +/* + * U-boot - serial.c Serial driver for BF537 + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * This file is based on + * bf537_serial.c: Serial driver for BlackFin BF537 internal UART. + * Copyright (c) 2003 Bas Vermeulen <bas@buyways.nl>, + * BuyWays B.V. (www.buyways.nl) + * + * Based heavily on blkfinserial.c + * blkfinserial.c: Serial driver for BlackFin DSP internal USRTs. + * Copyright(c) 2003 Metrowerks <mwaddel@metrowerks.com> + * Copyright(c) 2001 Tony Z. Kou <tonyko@arcturusnetworks.com> + * Copyright(c) 2001-2002 Arcturus Networks Inc. <www.arcturusnetworks.com> + * + * Based on code from 68328 version serial driver imlpementation which was: + * Copyright (C) 1995 David S. Miller <davem@caip.rutgers.edu> + * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com> + * Copyright (C) 1998, 1999 D. Jeff Dionne <jeff@uclinux.org> + * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com> + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/irq.h> +#include <asm/system.h> +#include <asm/segment.h> +#include <asm/bitops.h> +#include <asm/delay.h> +#include <asm/uaccess.h> +#include <asm/io.h> +#include "serial.h" + +unsigned long pll_div_fact; + +void calc_baud(void) +{ + unsigned char i; + int temp; + u_long sclk = get_sclk(); + + for (i = 0; i < sizeof(baud_table) / sizeof(int); i++) { + temp = sclk / (baud_table[i] * 8); + if ((temp & 0x1) == 1) { + temp++; + } + temp = temp / 2; + hw_baud_table[i].dl_high = (temp >> 8) & 0xFF; + hw_baud_table[i].dl_low = (temp) & 0xFF; + } +} + +void serial_setbrg(void) +{ + int i; + DECLARE_GLOBAL_DATA_PTR; + + calc_baud(); + + for (i = 0; i < sizeof(baud_table) / sizeof(int); i++) { + if (gd->baudrate == baud_table[i]) + break; + } + + /* Enable UART */ + *pUART_GCTL |= UART_GCTL_UCEN; + sync(); + + /* Set DLAB in LCR to Access DLL and DLH */ + ACCESS_LATCH; + sync(); + + *pUART_DLL = hw_baud_table[i].dl_low; + sync(); + *pUART_DLH = hw_baud_table[i].dl_high; + sync(); + + /* Clear DLAB in LCR to Access THR RBR IER */ + ACCESS_PORT_IER; + sync(); + + /* Enable ERBFI and ELSI interrupts + * to poll SIC_ISR register*/ + *pUART_IER = UART_IER_ELSI | UART_IER_ERBFI | UART_IER_ETBEI; + sync(); + + /* Set LCR to Word Lengh 8-bit word select */ + *pUART_LCR = UART_LCR_WLS8; + sync(); + + return; +} + +int serial_init(void) +{ + serial_setbrg(); + return (0); +} + +void serial_putc(const char c) +{ + if ((*pUART_LSR) & UART_LSR_TEMT) { + if (c == '\n') + serial_putc('\r'); + + local_put_char(c); + } + + while (!((*pUART_LSR) & UART_LSR_TEMT)) + SYNC_ALL; + + return; +} + +int serial_tstc(void) +{ + if (*pUART_LSR & UART_LSR_DR) + return 1; + else + return 0; +} + +int serial_getc(void) +{ + unsigned short uart_lsr_val, uart_rbr_val; + unsigned long isr_val; + int ret; + + /* Poll for RX Interrupt */ + while (!((isr_val = + *(volatile unsigned long *)SIC_ISR) & IRQ_UART_RX_BIT)) ; + asm("csync;"); + + uart_lsr_val = *pUART_LSR; /* Clear status bit */ + uart_rbr_val = *pUART_RBR; /* getc() */ + + if (isr_val & IRQ_UART_ERROR_BIT) { + ret = -1; + } else { + ret = uart_rbr_val & 0xff; + } + + return ret; +} + +void serial_puts(const char *s) +{ + while (*s) { + serial_putc(*s++); + } +} + +static void local_put_char(char ch) +{ + int flags = 0; + unsigned long isr_val; + + save_and_cli(flags); + + /* Poll for TX Interruput */ + while (!((isr_val = *pSIC_ISR) & IRQ_UART_TX_BIT)) ; + asm("csync;"); + + *pUART_THR = ch; /* putc() */ + + if (isr_val & IRQ_UART_ERROR_BIT) { + printf("?"); + } + + restore_flags(flags); + + return; +} diff --git a/cpu/bf537/serial.h b/cpu/bf537/serial.h new file mode 100644 index 0000000..c9ee3dc --- /dev/null +++ b/cpu/bf537/serial.h @@ -0,0 +1,77 @@ +/* + * U-boot - bf537_serial.h Serial Driver defines + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * This file is based on + * bf533_serial.h: Definitions for the BlackFin BF533 DSP serial driver. + * Copyright (C) 2003 Bas Vermeulen <bas@buyways.nl> + * BuyWays B.V. (www.buyways.nl) + * + * Based heavily on: + * blkfinserial.h: Definitions for the BlackFin DSP serial driver. + * + * Copyright (C) 2001 Tony Z. Kou tonyko@arcturusnetworks.com + * Copyright (C) 2001 Arcturus Networks Inc. <www.arcturusnetworks.com> + * + * Based on code from 68328serial.c which was: + * Copyright (C) 1995 David S. Miller <davem@caip.rutgers.edu> + * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com> + * Copyright (C) 1998, 1999 D. Jeff Dionne <jeff@uclinux.org> + * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com> + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _Bf537_SERIAL_H +#define _Bf537_SERIAL_H + +#include <linux/config.h> +#include <asm/blackfin.h> + +#define SYNC_ALL __asm__ __volatile__ ("ssync;\n") +#define ACCESS_LATCH *pUART_LCR |= UART_LCR_DLAB; +#define ACCESS_PORT_IER *pUART_LCR &= (~UART_LCR_DLAB); + +void serial_setbrg(void); +static void local_put_char(char ch); +void calc_baud(void); +void serial_setbrg(void); +int serial_init(void); +void serial_putc(const char c); +int serial_tstc(void); +int serial_getc(void); +void serial_puts(const char *s); +static void local_put_char(char ch); + +int baud_table[5] = { 9600, 19200, 38400, 57600, 115200 }; + +struct { + unsigned char dl_high; + unsigned char dl_low; +} hw_baud_table[5]; + +#ifdef CONFIG_STAMP +extern unsigned long pll_div_fact; +#endif + +#endif diff --git a/cpu/bf537/start.S b/cpu/bf537/start.S new file mode 100644 index 0000000..264e9b6 --- /dev/null +++ b/cpu/bf537/start.S @@ -0,0 +1,579 @@ +/* + * U-boot - start.S Startup file of u-boot for BF537 + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * This file is based on head.S + * Copyright (c) 2003 Metrowerks/Motorola + * Copyright (C) 1998 D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>, + * Kenneth Albanowski <kjahds@kjahds.com>, + * The Silver Hammer Group, Ltd. + * (c) 1995, Dionne & Associates + * (c) 1995, DKG Display Tech. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Note: A change in this file subsequently requires a change in + * board/$(board_name)/config.mk for a valid u-boot.bin + */ + +#define ASSEMBLY + +#include <linux/config.h> +#include <config.h> +#include <asm/blackfin.h> + +.global _stext; +.global __bss_start; +.global start; +.global _start; +.global _rambase; +.global _ramstart; +.global _ramend; +.global _bf533_data_dest; +.global _bf533_data_size; +.global edata; +.global _initialize; +.global _exit; +.global flashdataend; +.global init_sdram; +.global _icache_enable; +.global _dcache_enable; +#if defined(CONFIG_BF537)&&defined(CONFIG_POST) +.global _memory_post_test; +.global _post_flag; +#endif + +#if (BFIN_BOOT_MODE == BF537_UART_BOOT) +#if (CONFIG_CCLK_DIV == 1) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV1 +#endif +#if (CONFIG_CCLK_DIV == 2) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV2 +#endif +#if (CONFIG_CCLK_DIV == 4) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV4 +#endif +#if (CONFIG_CCLK_DIV == 8) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV8 +#endif +#ifndef CONFIG_CCLK_ACT_DIV +#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly +#endif +#endif + +.text +_start: +start: +_stext: + + R0 = 0x32; + SYSCFG = R0; + SSYNC; + + /* As per HW reference manual DAG registers, + * DATA and Address resgister shall be zero'd + * in initialization, after a reset state + */ + r1 = 0; /* Data registers zero'd */ + r2 = 0; + r3 = 0; + r4 = 0; + r5 = 0; + r6 = 0; + r7 = 0; + + p0 = 0; /* Address registers zero'd */ + p1 = 0; + p2 = 0; + p3 = 0; + p4 = 0; + p5 = 0; + + i0 = 0; /* DAG Registers zero'd */ + i1 = 0; + i2 = 0; + i3 = 0; + m0 = 0; + m1 = 0; + m3 = 0; + m3 = 0; + l0 = 0; + l1 = 0; + l2 = 0; + l3 = 0; + b0 = 0; + b1 = 0; + b2 = 0; + b3 = 0; + + /* Set loop counters to zero, to make sure that + * hw loops are disabled. + */ + r0 = 0; + lc0 = r0; + lc1 = r0; + + SSYNC; + + /* Check soft reset status */ + p0.h = SWRST >> 16; + p0.l = SWRST & 0xFFFF; + r0.l = w[p0]; + + cc = bittst(r0, 15); + if !cc jump no_soft_reset; + + /* Clear Soft reset */ + r0 = 0x0000; + w[p0] = r0; + ssync; + +no_soft_reset: + nop; + + /* Clear EVT registers */ + p0.h = (EVT_EMULATION_ADDR >> 16); + p0.l = (EVT_EMULATION_ADDR & 0xFFFF); + p0 += 8; + p1 = 14; + r1 = 0; + LSETUP(4,4) lc0 = p1; + [ p0 ++ ] = r1; + +#if (BFIN_BOOT_MODE != BF537_SPI_MASTER_BOOT) + p0.h = hi(SIC_IWR); + p0.l = lo(SIC_IWR); + r0.l = 0x1; + w[p0] = r0.l; + SSYNC; +#endif + +#if (BFIN_BOOT_MODE == BF537_UART_BOOT) + + p0.h = hi(SIC_IWR); + p0.l = lo(SIC_IWR); + r0.l = 0x1; + w[p0] = r0.l; + SSYNC; + + /* + * PLL_LOCKCNT - how many SCLK Cycles to delay while PLL becomes stable + */ + p0.h = hi(PLL_LOCKCNT); + p0.l = lo(PLL_LOCKCNT); + r0 = 0x300(Z); + w[p0] = r0.l; + ssync; + + /* + * Put SDRAM in self-refresh, incase anything is running + */ + P2.H = hi(EBIU_SDGCTL); + P2.L = lo(EBIU_SDGCTL); + R0 = [P2]; + BITSET (R0, 24); + [P2] = R0; + SSYNC; + + /* + * Set PLL_CTL with the value that we calculate in R0 + * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors + * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK + * - [7] = output delay (add 200ps of delay to mem signals) + * - [6] = input delay (add 200ps of input delay to mem signals) + * - [5] = PDWN : 1=All Clocks off + * - [3] = STOPCK : 1=Core Clock off + * - [1] = PLL_OFF : 1=Disable Power to PLL + * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL + * all other bits set to zero + */ + + r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */ + r0 = r0 << 9; /* Shift it over, */ + r1 = CONFIG_CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/ + r0 = r1 | r0; + r1 = CONFIG_PLL_BYPASS; /* Bypass the PLL? */ + r1 = r1 << 8; /* Shift it over */ + r0 = r1 | r0; /* add them all together */ + + p0.h = hi(PLL_CTL); + p0.l = lo(PLL_CTL); /* Load the address */ + cli r2; /* Disable interrupts */ + ssync; + w[p0] = r0.l; /* Set the value */ + idle; /* Wait for the PLL to stablize */ + sti r2; /* Enable interrupts */ + +check_again: + p0.h = hi(PLL_STAT); + p0.l = lo(PLL_STAT); + R0 = W[P0](Z); + CC = BITTST(R0,5); + if ! CC jump check_again; + + /* Configure SCLK & CCLK Dividers */ + r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); + p0.h = hi(PLL_DIV); + p0.l = lo(PLL_DIV); + w[p0] = r0.l; + ssync; +#endif + + /* + * We now are running at speed, time to set the Async mem bank wait states + * This will speed up execution, since we are normally running from FLASH. + * we need to read MAC address from FLASH + */ + p2.h = (EBIU_AMBCTL1 >> 16); + p2.l = (EBIU_AMBCTL1 & 0xFFFF); + r0.h = (AMBCTL1VAL >> 16); + r0.l = (AMBCTL1VAL & 0xFFFF); + [p2] = r0; + ssync; + + p2.h = (EBIU_AMBCTL0 >> 16); + p2.l = (EBIU_AMBCTL0 & 0xFFFF); + r0.h = (AMBCTL0VAL >> 16); + r0.l = (AMBCTL0VAL & 0xFFFF); + [p2] = r0; + ssync; + + p2.h = (EBIU_AMGCTL >> 16); + p2.l = (EBIU_AMGCTL & 0xffff); + r0 = AMGCTLVAL; + w[p2] = r0; + ssync; + +#if ((BFIN_BOOT_MODE != BF537_SPI_MASTER_BOOT) && (BFIN_BOOT_MODE != BF537_UART_BOOT)) + sp.l = (0xffb01000 & 0xFFFF); + sp.h = (0xffb01000 >> 16); + + call init_sdram; +#endif + + +#if defined(CONFIG_BF537)&&defined(CONFIG_POST) + /* DMA POST code to Hi of L1 SRAM */ +postcopy: + /* P1 Points to the beginning of SYSTEM MMR Space */ + P1.H = hi(SYSMMR_BASE); + P1.L = lo(SYSMMR_BASE); + + R0.H = _text_l1; + R0.L = _text_l1; + R1.H = _etext_l1; + R1.L = _etext_l1; + R2 = R1 - R0; /* Count */ + R0.H = _etext; + R0.L = _etext; + R1.H = (CFG_MONITOR_BASE >> 16); + R1.L = (CFG_MONITOR_BASE & 0xFFFF); + R0 = R0 - R1; + R1.H = (CFG_FLASH_BASE >> 16); + R1.L = (CFG_FLASH_BASE & 0xFFFF); + R0 = R0 + R1; /* Source Address */ + R1.H = hi(L1_ISRAM); /* Destination Address (high) */ + R1.L = lo(L1_ISRAM); /* Destination Address (low) */ + R3.L = DMAEN; /* Source DMAConfig Value (8-bit words) */ + /* Destination DMAConfig Value (8-bit words) */ + R4.L = (DI_EN | WNR | DMAEN); + + R6 = 0x1 (Z); + W[P1+OFFSET_(MDMA_S0_X_MODIFY)] = R6; /* Source Modify = 1 */ + W[P1+OFFSET_(MDMA_D0_X_MODIFY)] = R6; /* Destination Modify = 1 */ + + [P1+OFFSET_(MDMA_S0_START_ADDR)] = R0; /* Set Source Base Address */ + W[P1+OFFSET_(MDMA_S0_X_COUNT)] = R2; /* Set Source Count */ + /* Set Source DMAConfig = DMA Enable, + Memory Read, 8-Bit Transfers, 1-D DMA, Flow - Stop */ + W[P1+OFFSET_(MDMA_S0_CONFIG)] = R3; + + [P1+OFFSET_(MDMA_D0_START_ADDR)] = R1; /* Set Destination Base Address */ + W[P1+OFFSET_(MDMA_D0_X_COUNT)] = R2; /* Set Destination Count */ + /* Set Destination DMAConfig = DMA Enable, + Memory Write, 8-Bit Transfers, 1-D DMA, Flow - Stop, IOC */ + W[P1+OFFSET_(MDMA_D0_CONFIG)] = R4; + +POST_DMA_DONE: + p0.h = hi(MDMA_D0_IRQ_STATUS); + p0.l = lo(MDMA_D0_IRQ_STATUS); + R0 = W[P0](Z); + CC = BITTST(R0, 0); + if ! CC jump POST_DMA_DONE + + R0 = 0x1; + W[P1+OFFSET_(MDMA_D0_IRQ_STATUS)] = R0; /* Write 1 to clear DMA interrupt */ + + /* DMA POST data to Hi of L1 SRAM */ + R0.H = _rodata_l1; + R0.L = _rodata_l1; + R1.H = _erodata_l1; + R1.L = _erodata_l1; + R2 = R1 - R0; /* Count */ + R0.H = _erodata; + R0.L = _erodata; + R1.H = (CFG_MONITOR_BASE >> 16); + R1.L = (CFG_MONITOR_BASE & 0xFFFF); + R0 = R0 - R1; + R1.H = (CFG_FLASH_BASE >> 16); + R1.L = (CFG_FLASH_BASE & 0xFFFF); + R0 = R0 + R1; /* Source Address */ + R1.H = hi(DATA_BANKB_SRAM); /* Destination Address (high) */ + R1.L = lo(DATA_BANKB_SRAM); /* Destination Address (low) */ + R3.L = DMAEN; /* Source DMAConfig Value (8-bit words) */ + R4.L = (DI_EN | WNR | DMAEN); /* Destination DMAConfig Value (8-bit words) */ + + R6 = 0x1 (Z); + W[P1+OFFSET_(MDMA_S0_X_MODIFY)] = R6; /* Source Modify = 1 */ + W[P1+OFFSET_(MDMA_D0_X_MODIFY)] = R6; /* Destination Modify = 1 */ + + [P1+OFFSET_(MDMA_S0_START_ADDR)] = R0; /* Set Source Base Address */ + W[P1+OFFSET_(MDMA_S0_X_COUNT)] = R2; /* Set Source Count */ + /* Set Source DMAConfig = DMA Enable, + Memory Read, 8-Bit Transfers, 1-D DMA, Flow - Stop */ + W[P1+OFFSET_(MDMA_S0_CONFIG)] = R3; + + [P1+OFFSET_(MDMA_D0_START_ADDR)] = R1; /* Set Destination Base Address */ + W[P1+OFFSET_(MDMA_D0_X_COUNT)] = R2; /* Set Destination Count */ + /* Set Destination DMAConfig = DMA Enable, + Memory Write, 8-Bit Transfers, 1-D DMA, Flow - Stop, IOC */ + W[P1+OFFSET_(MDMA_D0_CONFIG)] = R4; + +POST_DATA_DMA_DONE: + p0.h = hi(MDMA_D0_IRQ_STATUS); + p0.l = lo(MDMA_D0_IRQ_STATUS); + R0 = W[P0](Z); + CC = BITTST(R0, 0); + if ! CC jump POST_DATA_DMA_DONE + + R0 = 0x1; + W[P1+OFFSET_(MDMA_D0_IRQ_STATUS)] = R0; /* Write 1 to clear DMA interrupt */ + + p0.l = _memory_post_test; + p0.h = _memory_post_test; + r0 = 0x0; + call (p0); + r7 = r0; /* save return value */ + + call init_sdram; +#endif + + /* relocate into to RAM */ + call get_pc; +offset: + r2.l = offset; + r2.h = offset; + r3.l = start; + r3.h = start; + r1 = r2 - r3; + + r0 = r0 - r1; + p1 = r0; + + p2.l = (CFG_MONITOR_BASE & 0xffff); + p2.h = (CFG_MONITOR_BASE >> 16); + + p3 = 0x04; + p4.l = ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) & 0xffff); + p4.h = ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) >> 16); +loop1: + r1 = [p1 ++ p3]; + [p2 ++ p3] = r1; + cc=p2==p4; + if !cc jump loop1; + /* + * configure STACK + */ + r0.h = (CONFIG_STACKBASE >> 16); + r0.l = (CONFIG_STACKBASE & 0xFFFF); + sp = r0; + fp = sp; + + /* + * This next section keeps the processor in supervisor mode + * during kernel boot. Switches to user mode at end of boot. + * See page 3-9 of Hardware Reference manual for documentation. + */ + + /* To keep ourselves in the supervisor mode */ + p0.l = (EVT_IVG15_ADDR & 0xFFFF); + p0.h = (EVT_IVG15_ADDR >> 16); + + p1.l = _real_start; + p1.h = _real_start; + [p0] = p1; + + p0.l = (IMASK & 0xFFFF); + p0.h = (IMASK >> 16); + r0.l = LO(IVG15_POS); + r0.h = HI(IVG15_POS); + [p0] = r0; + raise 15; + p0.l = WAIT_HERE; + p0.h = WAIT_HERE; + reti = p0; + rti; + +WAIT_HERE: + jump WAIT_HERE; + +.global _real_start; +_real_start: + [ -- sp ] = reti; + +#ifdef CONFIG_BF537 +/* Initialise General-Purpose I/O Modules on BF537 + * Rev 0.0 Anomaly 05000212 - PORTx_FER, + * PORT_MUX Registers Do Not accept "writes" correctly + */ + p0.h = hi(PORTF_FER); + p0.l = lo(PORTF_FER); + R0.L = W[P0]; /* Read */ + nop; + nop; + nop; + ssync; + R0 = 0x000F(Z); + W[P0] = R0.L; /* Write */ + nop; + nop; + nop; + ssync; + W[P0] = R0.L; /* Enable peripheral function of PORTF for UART0 and UART1 */ + nop; + nop; + nop; + ssync; + + p0.h = hi(PORTH_FER); + p0.l = lo(PORTH_FER); + R0.L = W[P0]; /* Read */ + nop; + nop; + nop; + ssync; + R0 = 0xFFFF(Z); + W[P0] = R0.L; /* Write */ + nop; + nop; + nop; + ssync; + W[P0] = R0.L; /* Enable peripheral function of PORTH for MAC */ + nop; + nop; + nop; + ssync; + +#endif + + /* DMA reset code to Hi of L1 SRAM */ +copy: + P1.H = hi(SYSMMR_BASE); /* P1 Points to the beginning of SYSTEM MMR Space */ + P1.L = lo(SYSMMR_BASE); + + R0.H = reset_start; /* Source Address (high) */ + R0.L = reset_start; /* Source Address (low) */ + R1.H = reset_end; + R1.L = reset_end; + R2 = R1 - R0; /* Count */ + R1.H = hi(L1_ISRAM); /* Destination Address (high) */ + R1.L = lo(L1_ISRAM); /* Destination Address (low) */ + R3.L = DMAEN; /* Source DMAConfig Value (8-bit words) */ + R4.L = (DI_EN | WNR | DMAEN); /* Destination DMAConfig Value (8-bit words) */ + +DMA: + R6 = 0x1 (Z); + W[P1+OFFSET_(MDMA_S0_X_MODIFY)] = R6; /* Source Modify = 1 */ + W[P1+OFFSET_(MDMA_D0_X_MODIFY)] = R6; /* Destination Modify = 1 */ + + [P1+OFFSET_(MDMA_S0_START_ADDR)] = R0; /* Set Source Base Address */ + W[P1+OFFSET_(MDMA_S0_X_COUNT)] = R2; /* Set Source Count */ + /* Set Source DMAConfig = DMA Enable, + Memory Read, 8-Bit Transfers, 1-D DMA, Flow - Stop */ + W[P1+OFFSET_(MDMA_S0_CONFIG)] = R3; + + [P1+OFFSET_(MDMA_D0_START_ADDR)] = R1; /* Set Destination Base Address */ + W[P1+OFFSET_(MDMA_D0_X_COUNT)] = R2; /* Set Destination Count */ + /* Set Destination DMAConfig = DMA Enable, + Memory Write, 8-Bit Transfers, 1-D DMA, Flow - Stop, IOC */ + W[P1+OFFSET_(MDMA_D0_CONFIG)] = R4; + +WAIT_DMA_DONE: + p0.h = hi(MDMA_D0_IRQ_STATUS); + p0.l = lo(MDMA_D0_IRQ_STATUS); + R0 = W[P0](Z); + CC = BITTST(R0, 0); + if ! CC jump WAIT_DMA_DONE + + R0 = 0x1; + W[P1+OFFSET_(MDMA_D0_IRQ_STATUS)] = R0; /* Write 1 to clear DMA interrupt */ + + /* Initialize BSS Section with 0 s */ + p1.l = __bss_start; + p1.h = __bss_start; + p2.l = _end; + p2.h = _end; + r1 = p1; + r2 = p2; + r3 = r2 - r1; + r3 = r3 >> 2; + p3 = r3; + lsetup (_clear_bss, _clear_bss_end ) lc1 = p3; + CC = p2<=p1; + if CC jump _clear_bss_skip; + r0 = 0; +_clear_bss: +_clear_bss_end: + [p1++] = r0; +_clear_bss_skip: + +#if defined(CONFIG_BF537)&&defined(CONFIG_POST) + p0.l = _post_flag; + p0.h = _post_flag; + r0 = r7; + [p0] = r0; +#endif + + p0.l = _start1; + p0.h = _start1; + jump (p0); + +reset_start: + p0.h = WDOG_CNT >> 16; + p0.l = WDOG_CNT & 0xffff; + r0 = 0x0010; + w[p0] = r0; + p0.h = WDOG_CTL >> 16; + p0.l = WDOG_CTL & 0xffff; + r0 = 0x0000; + w[p0] = r0; +reset_wait: + jump reset_wait; + +reset_end: + nop; + +_exit: + jump.s _exit; +get_pc: + r0 = rets; + rts; diff --git a/cpu/bf537/start1.S b/cpu/bf537/start1.S new file mode 100644 index 0000000..72cfafb --- /dev/null +++ b/cpu/bf537/start1.S @@ -0,0 +1,38 @@ +/* + * U-boot - start1.S Code running out of RAM after relocation + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#define ASSEMBLY +#include <linux/config.h> +#include <config.h> +#include <asm/blackfin.h> + +.global start1; +.global _start1; + +.text +_start1: +start1: + sp += -12; + call _board_init_f; + sp += 12; diff --git a/cpu/bf537/traps.c b/cpu/bf537/traps.c new file mode 100644 index 0000000..994ece8 --- /dev/null +++ b/cpu/bf537/traps.c @@ -0,0 +1,241 @@ +/* + * U-boot - traps.c Routines related to interrupts and exceptions + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * This file is based on + * No original Copyright holder listed, + * Probabily original (C) Roman Zippel (assigned DJD, 1999) + * + * Copyright 2003 Metrowerks - for Blackfin + * Copyright 2000-2001 Lineo, Inc. D. Jeff Dionne <jeff@lineo.ca> + * Copyright 1999-2000 D. Jeff Dionne, <jeff@uclinux.org> + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <linux/types.h> +#include <asm/errno.h> +#include <asm/irq.h> +#include <asm/system.h> +#include <asm/traps.h> +#include <asm/page.h> +#include <asm/machdep.h> +#include "cpu.h" +#include <asm/arch/anomaly.h> +#include <asm/cplb.h> +#include <asm/io.h> + +void init_IRQ(void) +{ + blackfin_init_IRQ(); + return; +} + +void process_int(unsigned long vec, struct pt_regs *fp) +{ + printf("interrupt\n"); + return; +} + +extern unsigned int icplb_table[page_descriptor_table_size][2]; +extern unsigned int dcplb_table[page_descriptor_table_size][2]; + +unsigned long last_cplb_fault_retx; + +static unsigned int cplb_sizes[4] = + { 1024, 4 * 1024, 1024 * 1024, 4 * 1024 * 1024 }; + +void trap_c(struct pt_regs *regs) +{ + unsigned int addr; + unsigned long trapnr = (regs->seqstat) & SEQSTAT_EXCAUSE; + unsigned int i, j, size, *I0, *I1; + unsigned short data = 0; + + switch (trapnr) { + /* 0x26 - Data CPLB Miss */ + case VEC_CPLB_M: + +#ifdef ANOMALY_05000261 + /* + * Work around an anomaly: if we see a new DCPLB fault, + * return without doing anything. Then, + * if we get the same fault again, handle it. + */ + addr = last_cplb_fault_retx; + last_cplb_fault_retx = regs->retx; + printf("this time, curr = 0x%08x last = 0x%08x\n", + addr, last_cplb_fault_retx); + if (addr != last_cplb_fault_retx) + goto trap_c_return; +#endif + data = 1; + + case VEC_CPLB_I_M: + + if (data) { + addr = *pDCPLB_FAULT_ADDR; + } else { + addr = *pICPLB_FAULT_ADDR; + } + for (i = 0; i < page_descriptor_table_size; i++) { + if (data) { + size = cplb_sizes[dcplb_table[i][1] >> 16]; + j = dcplb_table[i][0]; + } else { + size = cplb_sizes[icplb_table[i][1] >> 16]; + j = icplb_table[i][0]; + } + if ((j <= addr) && ((j + size) > addr)) { + debug("found %i 0x%08x\n", i, j); + break; + } + } + if (i == page_descriptor_table_size) { + printf("something is really wrong\n"); + do_reset(NULL, 0, 0, NULL); + } + + /* Turn the cache off */ + if (data) { + sync(); + asm(" .align 8; "); + *(unsigned int *)DMEM_CONTROL &= + ~(ACACHE_BCACHE | ENDCPLB | PORT_PREF0); + sync(); + } else { + sync(); + asm(" .align 8; "); + *(unsigned int *)IMEM_CONTROL &= ~(IMC | ENICPLB); + sync(); + } + + if (data) { + I0 = (unsigned int *)DCPLB_ADDR0; + I1 = (unsigned int *)DCPLB_DATA0; + } else { + I0 = (unsigned int *)ICPLB_ADDR0; + I1 = (unsigned int *)ICPLB_DATA0; + } + + j = 0; + while (*I1 & CPLB_LOCK) { + debug("skipping %i %08p - %08x\n", j, I1, *I1); + *I0++; + *I1++; + j++; + } + + debug("remove %i 0x%08x 0x%08x\n", j, *I0, *I1); + + for (; j < 15; j++) { + debug("replace %i 0x%08x 0x%08x\n", j, I0, I0 + 1); + *I0++ = *(I0 + 1); + *I1++ = *(I1 + 1); + } + + if (data) { + *I0 = dcplb_table[i][0]; + *I1 = dcplb_table[i][1]; + I0 = (unsigned int *)DCPLB_ADDR0; + I1 = (unsigned int *)DCPLB_DATA0; + } else { + *I0 = icplb_table[i][0]; + *I1 = icplb_table[i][1]; + I0 = (unsigned int *)ICPLB_ADDR0; + I1 = (unsigned int *)ICPLB_DATA0; + } + + for (j = 0; j < 16; j++) { + debug("%i 0x%08x 0x%08x\n", j, *I0++, *I1++); + } + + /* Turn the cache back on */ + if (data) { + j = *(unsigned int *)DMEM_CONTROL; + sync(); + asm(" .align 8; "); + *(unsigned int *)DMEM_CONTROL = + ACACHE_BCACHE | ENDCPLB | PORT_PREF0 | j; + sync(); + } else { + sync(); + asm(" .align 8; "); + *(unsigned int *)IMEM_CONTROL = IMC | ENICPLB; + sync(); + } + + break; + default: + /* All traps come here */ + printf("code=[0x%x], ", (unsigned int)(regs->seqstat & 0x3f)); + printf("stack frame=0x%x, ", (unsigned int)regs); + printf("bad PC=0x%04x\n", (unsigned int)regs->pc); + dump(regs); + printf("\n\n"); + + printf("Unhandled IRQ or exceptions!\n"); + printf("Please reset the board \n"); + do_reset(NULL, 0, 0, NULL); + } + +trap_c_return: + return; + +} + +void dump(struct pt_regs *fp) +{ + debug("RETE: %08lx RETN: %08lx RETX: %08lx RETS: %08lx\n", + fp->rete, fp->retn, fp->retx, fp->rets); + debug("IPEND: %04lx SYSCFG: %04lx\n", fp->ipend, fp->syscfg); + debug("SEQSTAT: %08lx SP: %08lx\n", (long)fp->seqstat, (long)fp); + debug("R0: %08lx R1: %08lx R2: %08lx R3: %08lx\n", + fp->r0, fp->r1, fp->r2, fp->r3); + debug("R4: %08lx R5: %08lx R6: %08lx R7: %08lx\n", + fp->r4, fp->r5, fp->r6, fp->r7); + debug("P0: %08lx P1: %08lx P2: %08lx P3: %08lx\n", + fp->p0, fp->p1, fp->p2, fp->p3); + debug("P4: %08lx P5: %08lx FP: %08lx\n", + fp->p4, fp->p5, fp->fp); + debug("A0.w: %08lx A0.x: %08lx A1.w: %08lx A1.x: %08lx\n", + fp->a0w, fp->a0x, fp->a1w, fp->a1x); + + debug("LB0: %08lx LT0: %08lx LC0: %08lx\n", + fp->lb0, fp->lt0, fp->lc0); + debug("LB1: %08lx LT1: %08lx LC1: %08lx\n", + fp->lb1, fp->lt1, fp->lc1); + debug("B0: %08lx L0: %08lx M0: %08lx I0: %08lx\n", + fp->b0, fp->l0, fp->m0, fp->i0); + debug("B1: %08lx L1: %08lx M1: %08lx I1: %08lx\n", + fp->b1, fp->l1, fp->m1, fp->i1); + debug("B2: %08lx L2: %08lx M2: %08lx I2: %08lx\n", + fp->b2, fp->l2, fp->m2, fp->i2); + debug("B3: %08lx L3: %08lx M3: %08lx I3: %08lx\n", + fp->b3, fp->l3, fp->m3, fp->i3); + + debug("DCPLB_FAULT_ADDR=%p\n", *pDCPLB_FAULT_ADDR); + debug("ICPLB_FAULT_ADDR=%p\n", *pICPLB_FAULT_ADDR); + +} diff --git a/cpu/bf537/video.c b/cpu/bf537/video.c new file mode 100644 index 0000000..3ff0151 --- /dev/null +++ b/cpu/bf537/video.c @@ -0,0 +1,194 @@ +/* + * (C) Copyright 2000 + * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it + * (C) Copyright 2002 + * Wolfgang Denk, wd@denx.de + * (C) Copyright 2006 + * Aubrey Li, aubrey.li@analog.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <stdarg.h> +#include <common.h> +#include <config.h> +#include <asm/blackfin.h> +#include <i2c.h> +#include <linux/types.h> +#include <devices.h> + +#ifdef CONFIG_VIDEO +#define NTSC_FRAME_ADDR 0x06000000 +#include "video.h" + +/* NTSC OUTPUT SIZE 720 * 240 */ +#define VERTICAL 2 +#define HORIZONTAL 4 + +int is_vblank_line(const int line) +{ + /* + * This array contains a single bit for each line in + * an NTSC frame. + */ + if ((line <= 18) || (line >= 264 && line <= 281) || (line == 528)) + return true; + + return false; +} + +int NTSC_framebuffer_init(char *base_address) +{ + const int NTSC_frames = 1; + const int NTSC_lines = 525; + char *dest = base_address; + int frame_num, line_num; + + for (frame_num = 0; frame_num < NTSC_frames; ++frame_num) { + for (line_num = 1; line_num <= NTSC_lines; ++line_num) { + unsigned int code; + int offset = 0; + int i; + + if (is_vblank_line(line_num)) + offset++; + + if (line_num > 266 || line_num < 3) + offset += 2; + + /* Output EAV code */ + code = SystemCodeMap[offset].EAV; + write_dest_byte((char)(code >> 24) & 0xff); + write_dest_byte((char)(code >> 16) & 0xff); + write_dest_byte((char)(code >> 8) & 0xff); + write_dest_byte((char)(code) & 0xff); + + /* Output horizontal blanking */ + for (i = 0; i < 67 * 2; ++i) { + write_dest_byte(0x80); + write_dest_byte(0x10); + } + + /* Output SAV */ + code = SystemCodeMap[offset].SAV; + write_dest_byte((char)(code >> 24) & 0xff); + write_dest_byte((char)(code >> 16) & 0xff); + write_dest_byte((char)(code >> 8) & 0xff); + write_dest_byte((char)(code) & 0xff); + + /* Output empty horizontal data */ + for (i = 0; i < 360 * 2; ++i) { + write_dest_byte(0x80); + write_dest_byte(0x10); + } + } + } + + return dest - base_address; +} + +void fill_frame(char *Frame, int Value) +{ + int *OddPtr32; + int OddLine; + int *EvenPtr32; + int EvenLine; + int i; + int *data; + int m, n; + + /* fill odd and even frames */ + for (OddLine = 22, EvenLine = 285; OddLine < 263; OddLine++, EvenLine++) { + OddPtr32 = (int *)((Frame + (OddLine * 1716)) + 276); + EvenPtr32 = (int *)((Frame + (EvenLine * 1716)) + 276); + for (i = 0; i < 360; i++, OddPtr32++, EvenPtr32++) { + *OddPtr32 = Value; + *EvenPtr32 = Value; + } + } + + for (m = 0; m < VERTICAL; m++) { + data = (int *)u_boot_logo.data; + for (OddLine = (22 + m), EvenLine = (285 + m); + OddLine < (u_boot_logo.height * VERTICAL) + (22 + m); + OddLine += VERTICAL, EvenLine += VERTICAL) { + OddPtr32 = (int *)((Frame + ((OddLine) * 1716)) + 276); + EvenPtr32 = + (int *)((Frame + ((EvenLine) * 1716)) + 276); + for (i = 0; i < u_boot_logo.width / 2; i++) { + /* enlarge one pixel to m x n */ + for (n = 0; n < HORIZONTAL; n++) { + *OddPtr32++ = *data; + *EvenPtr32++ = *data; + } + data++; + } + } + } +} + +void video_putc(const char c) +{ +} + +void video_puts(const char *s) +{ +} + +static int video_init(void) +{ + char *NTSCFrame; + NTSCFrame = (char *)NTSC_FRAME_ADDR; + NTSC_framebuffer_init(NTSCFrame); + fill_frame(NTSCFrame, BLUE); + + *pPPI_CONTROL = 0x0082; + *pPPI_FRAME = 0x020D; + + *pDMA0_START_ADDR = NTSCFrame; + *pDMA0_X_COUNT = 0x035A; + *pDMA0_X_MODIFY = 0x0002; + *pDMA0_Y_COUNT = 0x020D; + *pDMA0_Y_MODIFY = 0x0002; + *pDMA0_CONFIG = 0x1015; + *pPPI_CONTROL = 0x0083; + return 0; +} + +int drv_video_init(void) +{ + int error, devices = 1; + + device_t videodev; + + video_init(); /* Video initialization */ + + memset(&videodev, 0, sizeof(videodev)); + + strcpy(videodev.name, "video"); + videodev.ext = DEV_EXT_VIDEO; /* Video extensions */ + videodev.flags = DEV_FLAGS_OUTPUT; /* Output only */ + videodev.putc = video_putc; /* 'putc' function */ + videodev.puts = video_puts; /* 'puts' function */ + + error = device_register(&videodev); + + return (error == 0) ? devices : error; +} +#endif diff --git a/cpu/bf537/video.h b/cpu/bf537/video.h new file mode 100644 index 0000000..a43553f --- /dev/null +++ b/cpu/bf537/video.h @@ -0,0 +1,25 @@ +#include <video_logo.h> +#define write_dest_byte(val) {*dest++=val;} +#define BLACK (0x01800180) /* black pixel pattern */ +#define BLUE (0x296E29F0) /* blue pixel pattern */ +#define RED (0x51F0515A) /* red pixel pattern */ +#define MAGENTA (0x6ADE6ACA) /* magenta pixel pattern*/ +#define GREEN (0x91229136) /* green pixel pattern */ +#define CYAN (0xAA10AAA6) /* cyan pixel pattern */ +#define YELLOW (0xD292D210) /* yellow pixel pattern */ +#define WHITE (0xFE80FE80) /* white pixel pattern */ + +#define true 1 +#define false 0 + +typedef struct { + unsigned int SAV; + unsigned int EAV; +} SystemCodeType; + +const SystemCodeType SystemCodeMap[4] = { + {0xFF000080, 0xFF00009D}, + {0xFF0000AB, 0xFF0000B6}, + {0xFF0000C7, 0xFF0000DA}, + {0xFF0000EC, 0xFF0000F1} +}; diff --git a/cpu/bf561/Makefile b/cpu/bf561/Makefile new file mode 100644 index 0000000..ee7842a --- /dev/null +++ b/cpu/bf561/Makefile @@ -0,0 +1,52 @@ +# U-boot - Makefile +# +# Copyright (c) 2005 blackfin.uclinux.org +# +# (C) Copyright 2000-2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(CPU).a + +START = start.o start1.o interrupt.o cache.o flush.o init_sdram.o +COBJS = cpu.o traps.o ints.o serial.o interrupts.o video.o + +EXTRA = init_sdram_bootrom_initblock.o + +SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) +START := $(addprefix $(obj),$(START)) + +all: $(obj).depend $(START) $(LIB) $(obj).depend $(EXTRA) + +$(LIB): $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/cpu/bf561/cache.S b/cpu/bf561/cache.S new file mode 100644 index 0000000..5bda5bf --- /dev/null +++ b/cpu/bf561/cache.S @@ -0,0 +1,128 @@ +#define ASSEMBLY +#include <asm/linkage.h> +#include <config.h> +#include <asm/blackfin.h> + +.text +.align 2 +ENTRY(_blackfin_icache_flush_range) + R2 = -32; + R2 = R0 & R2; + P0 = R2; + P1 = R1; + CSYNC; + 1: + IFLUSH[P0++]; + CC = P0 < P1(iu); + IF CC JUMP 1b(bp); + IFLUSH[P0]; + SSYNC; + RTS; + +ENTRY(_blackfin_dcache_flush_range) + R2 = -32; + R2 = R0 & R2; + P0 = R2; + P1 = R1; + CSYNC; +1: + FLUSH[P0++]; + CC = P0 < P1(iu); + IF CC JUMP 1b(bp); + FLUSH[P0]; + SSYNC; + RTS; + +ENTRY(_icache_invalidate) +ENTRY(_invalidate_entire_icache) + [--SP] = (R7:5); + + P0.L = (IMEM_CONTROL & 0xFFFF); + P0.H = (IMEM_CONTROL >> 16); + R7 =[P0]; + + /* + * Clear the IMC bit , All valid bits in the instruction + * cache are set to the invalid state + */ + BITCLR(R7, IMC_P); + CLI R6; + /* SSYNC required before invalidating cache. */ + SSYNC; + .align 8; + [P0] = R7; + SSYNC; + STI R6; + + /* Configures the instruction cache agian */ + R6 = (IMC | ENICPLB); + R7 = R7 | R6; + + CLI R6; + SSYNC; + .align 8; + [P0] = R7; + SSYNC; + STI R6; + + (R7:5) =[SP++]; + RTS; + +/* + * Invalidate the Entire Data cache by + * clearing DMC[1:0] bits + */ +ENTRY(_invalidate_entire_dcache) +ENTRY(_dcache_invalidate) + [--SP] = (R7:6); + + P0.L = (DMEM_CONTROL & 0xFFFF); + P0.H = (DMEM_CONTROL >> 16); + R7 =[P0]; + + /* + * Clear the DMC[1:0] bits, All valid bits in the data + * cache are set to the invalid state + */ + BITCLR(R7, DMC0_P); + BITCLR(R7, DMC1_P); + CLI R6; + SSYNC; + .align 8; + [P0] = R7; + SSYNC; + STI R6; + /* Configures the data cache again */ + + R6 = (ACACHE_BCACHE | ENDCPLB | PORT_PREF0); + R7 = R7 | R6; + + CLI R6; + SSYNC; + .align 8; + [P0] = R7; + SSYNC; + STI R6; + + (R7:6) =[SP++]; + RTS; + +ENTRY(_blackfin_dcache_invalidate_range) + R2 = -32; + R2 = R0 & R2; + P0 = R2; + P1 = R1; + CSYNC; +1: + FLUSHINV[P0++]; + CC = P0 < P1(iu); + IF CC JUMP 1b(bp); + + /* + * If the data crosses a cache line, then we'll be pointing to + * the last cache line, but won't have flushed/invalidated it yet, so do + * one more. + */ + FLUSHINV[P0]; + SSYNC; + RTS; diff --git a/cpu/bf561/config.mk b/cpu/bf561/config.mk new file mode 100644 index 0000000..c49a0ba --- /dev/null +++ b/cpu/bf561/config.mk @@ -0,0 +1,27 @@ +# U-boot - config.mk +# +# Copyright (c) 2005 blackfin.uclinux.org +# +# (C) Copyright 2000-2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +PLATFORM_RELFLAGS += -mcpu=bf561 -ffixed-P5 diff --git a/cpu/bf561/cpu.c b/cpu/bf561/cpu.c new file mode 100644 index 0000000..a7b53d8 --- /dev/null +++ b/cpu/bf561/cpu.c @@ -0,0 +1,220 @@ +/* + * U-boot - cpu.c CPU specific functions + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/blackfin.h> +#include <command.h> +#include <asm/entry.h> +#include <asm/cplb.h> +#include <asm/io.h> + +#define CACHE_ON 1 +#define CACHE_OFF 0 + +extern unsigned int icplb_table[page_descriptor_table_size][2]; +extern unsigned int dcplb_table[page_descriptor_table_size][2]; + +int do_reset(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + __asm__ __volatile__("cli r3;" "P0 = %0;" "JUMP (P0);"::"r"(L1_ISRAM) + ); + + return 0; +} + +/* These functions are just used to satisfy the linker */ +int cpu_init(void) +{ + return 0; +} + +int cleanup_before_linux(void) +{ + return 0; +} + +void icache_enable(void) +{ + unsigned int *I0, *I1; + int i, j = 0; + + /* Before enable icache, disable it first */ + icache_disable(); + I0 = (unsigned int *)ICPLB_ADDR0; + I1 = (unsigned int *)ICPLB_DATA0; + + /* make sure the locked ones go in first */ + for (i = 0; i < page_descriptor_table_size; i++) { + if (CPLB_LOCK & icplb_table[i][1]) { + debug("adding %02i %02i 0x%08x 0x%08x\n", i, j, + icplb_table[i][0], icplb_table[i][1]); + *I0++ = icplb_table[i][0]; + *I1++ = icplb_table[i][1]; + j++; + } + } + + for (i = 0; i < page_descriptor_table_size; i++) { + if (!(CPLB_LOCK & icplb_table[i][1])) { + debug("adding %02i %02i 0x%08x 0x%08x\n", i, j, + icplb_table[i][0], icplb_table[i][1]); + *I0++ = icplb_table[i][0]; + *I1++ = icplb_table[i][1]; + j++; + if (j == 16) { + break; + } + } + } + + /* Fill the rest with invalid entry */ + if (j <= 15) { + for (; j < 16; j++) { + debug("filling %i with 0", j); + *I1++ = 0x0; + } + + } + + cli(); + sync(); + asm(" .align 8; "); + *(unsigned int *)IMEM_CONTROL = IMC | ENICPLB; + sync(); + sti(); +} + +void icache_disable(void) +{ + cli(); + sync(); + asm(" .align 8; "); + *(unsigned int *)IMEM_CONTROL &= ~(IMC | ENICPLB); + sync(); + sti(); +} + +int icache_status(void) +{ + unsigned int value; + value = *(unsigned int *)IMEM_CONTROL; + + if (value & (IMC | ENICPLB)) + return CACHE_ON; + else + return CACHE_OFF; +} + +void dcache_enable(void) +{ + unsigned int *I0, *I1; + unsigned int temp; + int i, j = 0; + + /* Before enable dcache, disable it first */ + dcache_disable(); + I0 = (unsigned int *)DCPLB_ADDR0; + I1 = (unsigned int *)DCPLB_DATA0; + + /* make sure the locked ones go in first */ + for (i = 0; i < page_descriptor_table_size; i++) { + if (CPLB_LOCK & dcplb_table[i][1]) { + debug("adding %02i %02i 0x%08x 0x%08x\n", i, j, + dcplb_table[i][0], dcplb_table[i][1]); + *I0++ = dcplb_table[i][0]; + *I1++ = dcplb_table[i][1]; + j++; + } else { + debug("skip %02i %02i 0x%08x 0x%08x\n", i, j, + dcplb_table[i][0], dcplb_table[i][1]); + } + } + + for (i = 0; i < page_descriptor_table_size; i++) { + if (!(CPLB_LOCK & dcplb_table[i][1])) { + debug("adding %02i %02i 0x%08x 0x%08x\n", i, j, + dcplb_table[i][0], dcplb_table[i][1]); + *I0++ = dcplb_table[i][0]; + *I1++ = dcplb_table[i][1]; + j++; + if (j == 16) { + break; + } + } + } + + /* Fill the rest with invalid entry */ + if (j <= 15) { + for (; j < 16; j++) { + debug("filling %i with 0", j); + *I1++ = 0x0; + } + } + + cli(); + temp = *(unsigned int *)DMEM_CONTROL; + sync(); + asm(" .align 8; "); + *(unsigned int *)DMEM_CONTROL = + ACACHE_BCACHE | ENDCPLB | PORT_PREF0 | temp; + sync(); + sti(); +} + +void dcache_disable(void) +{ + + unsigned int *I0, *I1; + int i; + + cli(); + sync(); + asm(" .align 8; "); + *(unsigned int *)DMEM_CONTROL &= + ~(ACACHE_BCACHE | ENDCPLB | PORT_PREF0); + sync(); + sti(); + + /* after disable dcache, clear it so we don't confuse the next application */ + I0 = (unsigned int *)DCPLB_ADDR0; + I1 = (unsigned int *)DCPLB_DATA0; + + for (i = 0; i < 16; i++) { + *I0++ = 0x0; + *I1++ = 0x0; + } +} + +int dcache_status(void) +{ + unsigned int value; + value = *(unsigned int *)DMEM_CONTROL; + if (value & (ENDCPLB)) + return CACHE_ON; + else + return CACHE_OFF; +} diff --git a/cpu/bf561/cpu.h b/cpu/bf561/cpu.h new file mode 100644 index 0000000..821363e --- /dev/null +++ b/cpu/bf561/cpu.h @@ -0,0 +1,66 @@ +/* + * U-boot - cpu.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _CPU_H_ +#define _CPU_H_ + +#include <command.h> + +#define INTERNAL_IRQS (32) +#define NUM_IRQ_NODES 16 +#define DEF_INTERRUPT_FLAGS 1 +#define MAX_TIM_LOAD 0xFFFFFFFF + +void blackfin_irq_panic(int reason, struct pt_regs *reg); +extern void dump(struct pt_regs *regs); +void display_excp(void); +asmlinkage void evt_nmi(void); +asmlinkage void evt_exception(void); +asmlinkage void trap(void); +asmlinkage void evt_ivhw(void); +asmlinkage void evt_rst(void); +asmlinkage void evt_timer(void); +asmlinkage void evt_evt7(void); +asmlinkage void evt_evt8(void); +asmlinkage void evt_evt9(void); +asmlinkage void evt_evt10(void); +asmlinkage void evt_evt11(void); +asmlinkage void evt_evt12(void); +asmlinkage void evt_evt13(void); +asmlinkage void evt_soft_int1(void); +asmlinkage void evt_system_call(void); +void blackfin_irq_panic(int reason, struct pt_regs *regs); +void blackfin_free_irq(unsigned int irq, void *dev_id); +void call_isr(int irq, struct pt_regs *fp); +void blackfin_do_irq(int vec, struct pt_regs *fp); +void blackfin_init_IRQ(void); +void blackfin_enable_irq(unsigned int irq); +void blackfin_disable_irq(unsigned int irq); +extern int do_reset(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]); +int blackfin_request_irq(unsigned int irq, + void (*handler) (int, void *, struct pt_regs *), + unsigned long flags, const char *devname, + void *dev_id); +void timer_init(void); +#endif diff --git a/cpu/bf561/flush.S b/cpu/bf561/flush.S new file mode 100644 index 0000000..7e12c83 --- /dev/null +++ b/cpu/bf561/flush.S @@ -0,0 +1,402 @@ +/* Copyright (C) 2003 Analog Devices, Inc. All Rights Reserved. + * Copyright (C) 2004 LG SOft India. All Rights Reserved. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. + */ +#define ASSEMBLY + +#include <asm/linkage.h> +#include <asm/cplb.h> +#include <config.h> +#include <asm/blackfin.h> + +.text + +/* This is an external function being called by the user + * application through __flush_cache_all. Currently this function + * serves the purpose of flushing all the pending writes in + * in the instruction cache. + */ + +ENTRY(_flush_instruction_cache) + [--SP] = ( R7:6, P5:4 ); + LINK 12; + SP += -12; + P5.H = (ICPLB_ADDR0 >> 16); + P5.L = (ICPLB_ADDR0 & 0xFFFF); + P4.H = (ICPLB_DATA0 >> 16); + P4.L = (ICPLB_DATA0 & 0xFFFF); + R7 = CPLB_VALID | CPLB_L1_CHBL; + R6 = 16; +inext: R0 = [P5++]; + R1 = [P4++]; + [--SP] = RETS; + CALL _icplb_flush; /* R0 = page, R1 = data*/ + RETS = [SP++]; +iskip: R6 += -1; + CC = R6; + IF CC JUMP inext; + SSYNC; + SP += 12; + UNLINK; + ( R7:6, P5:4 ) = [SP++]; + RTS; + +/* This is an internal function to flush all pending + * writes in the cache associated with a particular ICPLB. + * + * R0 - page's start address + * R1 - CPLB's data field. + */ + +.align 2 +ENTRY(_icplb_flush) + [--SP] = ( R7:0, P5:0 ); + [--SP] = LC0; + [--SP] = LT0; + [--SP] = LB0; + [--SP] = LC1; + [--SP] = LT1; + [--SP] = LB1; + + /* If it's a 1K or 4K page, then it's quickest to + * just systematically flush all the addresses in + * the page, regardless of whether they're in the + * cache, or dirty. If it's a 1M or 4M page, there + * are too many addresses, and we have to search the + * cache for lines corresponding to the page. + */ + + CC = BITTST(R1, 17); /* 1MB or 4MB */ + IF !CC JUMP iflush_whole_page; + + /* We're only interested in the page's size, so extract + * this from the CPLB (bits 17:16), and scale to give an + * offset into the page_size and page_prefix tables. + */ + + R1 <<= 14; + R1 >>= 30; + R1 <<= 2; + + /* We can also determine the sub-bank used, because this is + * taken from bits 13:12 of the address. + */ + + R3 = ((12<<8)|2); /* Extraction pattern */ + nop; /*Anamoly 05000209*/ + R4 = EXTRACT(R0, R3.L) (Z); /* Extract bits*/ + R3.H = R4.L << 0 ; /* Save in extraction pattern for later deposit.*/ + + + /* So: + * R0 = Page start + * R1 = Page length (actually, offset into size/prefix tables) + * R3 = sub-bank deposit values + * + * The cache has 2 Ways, and 64 sets, so we iterate through + * the sets, accessing the tag for each Way, for our Bank and + * sub-bank, looking for dirty, valid tags that match our + * address prefix. + */ + + P5.L = (ITEST_COMMAND & 0xFFFF); + P5.H = (ITEST_COMMAND >> 16); + P4.L = (ITEST_DATA0 & 0xFFFF); + P4.H = (ITEST_DATA0 >> 16); + + P0.L = page_prefix_table; + P0.H = page_prefix_table; + P1 = R1; + R5 = 0; /* Set counter*/ + P0 = P1 + P0; + R4 = [P0]; /* This is the address prefix*/ + + /* We're reading (bit 1==0) the tag (bit 2==0), and we + * don't care about which double-word, since we're only + * fetching tags, so we only have to set Set, Bank, + * Sub-bank and Way. + */ + + P2 = 4; + LSETUP (ifs1, ife1) LC1 = P2; +ifs1: P0 = 32; /* iterate over all sets*/ + LSETUP (ifs0, ife0) LC0 = P0; +ifs0: R6 = R5 << 5; /* Combine set*/ + R6.H = R3.H << 0 ; /* and sub-bank*/ + [P5] = R6; /* Issue Command*/ + SSYNC; /* CSYNC will not work here :(*/ + R7 = [P4]; /* and read Tag.*/ + CC = BITTST(R7, 0); /* Check if valid*/ + IF !CC JUMP ifskip; /* and skip if not.*/ + + /* Compare against the page address. First, plant bits 13:12 + * into the tag, since those aren't part of the returned data. + */ + + R7 = DEPOSIT(R7, R3); /* set 13:12*/ + R1 = R7 & R4; /* Mask off lower bits*/ + CC = R1 == R0; /* Compare against page start.*/ + IF !CC JUMP ifskip; /* Skip it if it doesn't match.*/ + + /* Tag address matches against page, so this is an entry + * we must flush. + */ + + R7 >>= 10; /* Mask off the non-address bits*/ + R7 <<= 10; + P3 = R7; + IFLUSH [P3]; /* And flush the entry*/ +ifskip: +ife0: R5 += 1; /* Advance to next Set*/ +ife1: NOP; + +ifinished: + SSYNC; /* Ensure the data gets out to mem.*/ + + /*Finished. Restore context.*/ + LB1 = [SP++]; + LT1 = [SP++]; + LC1 = [SP++]; + LB0 = [SP++]; + LT0 = [SP++]; + LC0 = [SP++]; + ( R7:0, P5:0 ) = [SP++]; + RTS; + +iflush_whole_page: + /* It's a 1K or 4K page, so quicker to just flush the + * entire page. + */ + + P1 = 32; /* For 1K pages*/ + P2 = P1 << 2; /* For 4K pages*/ + P0 = R0; /* Start of page*/ + CC = BITTST(R1, 16); /* Whether 1K or 4K*/ + IF CC P1 = P2; + P1 += -1; /* Unroll one iteration*/ + SSYNC; + IFLUSH [P0++]; /* because CSYNC can't end loops.*/ + LSETUP (isall, ieall) LC0 = P1; +isall:IFLUSH [P0++]; +ieall: NOP; + SSYNC; + JUMP ifinished; + +/* This is an external function being called by the user + * application through __flush_cache_all. Currently this function + * serves the purpose of flushing all the pending writes in + * in the data cache. + */ + +ENTRY(_flush_data_cache) + [--SP] = ( R7:6, P5:4 ); + LINK 12; + SP += -12; + P5.H = (DCPLB_ADDR0 >> 16); + P5.L = (DCPLB_ADDR0 & 0xFFFF); + P4.H = (DCPLB_DATA0 >> 16); + P4.L = (DCPLB_DATA0 & 0xFFFF); + R7 = CPLB_VALID | CPLB_L1_CHBL | CPLB_DIRTY (Z); + R6 = 16; +next: R0 = [P5++]; + R1 = [P4++]; + CC = BITTST(R1, 14); /* Is it write-through?*/ + IF CC JUMP skip; /* If so, ignore it.*/ + R2 = R1 & R7; /* Is it a dirty, cached page?*/ + CC = R2; + IF !CC JUMP skip; /* If not, ignore it.*/ + [--SP] = RETS; + CALL _dcplb_flush; /* R0 = page, R1 = data*/ + RETS = [SP++]; +skip: R6 += -1; + CC = R6; + IF CC JUMP next; + SSYNC; + SP += 12; + UNLINK; + ( R7:6, P5:4 ) = [SP++]; + RTS; + +/* This is an internal function to flush all pending + * writes in the cache associated with a particular DCPLB. + * + * R0 - page's start address + * R1 - CPLB's data field. + */ + +.align 2 +ENTRY(_dcplb_flush) + [--SP] = ( R7:0, P5:0 ); + [--SP] = LC0; + [--SP] = LT0; + [--SP] = LB0; + [--SP] = LC1; + [--SP] = LT1; + [--SP] = LB1; + + /* If it's a 1K or 4K page, then it's quickest to + * just systematically flush all the addresses in + * the page, regardless of whether they're in the + * cache, or dirty. If it's a 1M or 4M page, there + * are too many addresses, and we have to search the + * cache for lines corresponding to the page. + */ + + CC = BITTST(R1, 17); /* 1MB or 4MB */ + IF !CC JUMP dflush_whole_page; + + /* We're only interested in the page's size, so extract + * this from the CPLB (bits 17:16), and scale to give an + * offset into the page_size and page_prefix tables. + */ + + R1 <<= 14; + R1 >>= 30; + R1 <<= 2; + + /* The page could be mapped into Bank A or Bank B, depending + * on (a) whether both banks are configured as cache, and + * (b) on whether address bit A[x] is set. x is determined + * by DCBS in DMEM_CONTROL + */ + + R2 = 0; /* Default to Bank A (Bank B would be 1)*/ + + P0.L = (DMEM_CONTROL & 0xFFFF); + P0.H = (DMEM_CONTROL >> 16); + + R3 = [P0]; /* If Bank B is not enabled as cache*/ + CC = BITTST(R3, 2); /* then Bank A is our only option.*/ + IF CC JUMP bank_chosen; + + R4 = 1<<14; /* If DCBS==0, use A[14].*/ + R5 = R4 << 7; /* If DCBS==1, use A[23];*/ + CC = BITTST(R3, 4); + IF CC R4 = R5; /* R4 now has either bit 14 or bit 23 set.*/ + R5 = R0 & R4; /* Use it to test the Page address*/ + CC = R5; /* and if that bit is set, we use Bank B,*/ + R2 = CC; /* else we use Bank A.*/ + R2 <<= 23; /* The Bank selection's at posn 23.*/ + +bank_chosen: + + /* We can also determine the sub-bank used, because this is + * taken from bits 13:12 of the address. + */ + + R3 = ((12<<8)|2); /* Extraction pattern */ + nop; /*Anamoly 05000209*/ + R4 = EXTRACT(R0, R3.L) (Z); /* Extract bits*/ + /* Save in extraction pattern for later deposit.*/ + R3.H = R4.L << 0; + + /* So: + * R0 = Page start + * R1 = Page length (actually, offset into size/prefix tables) + * R2 = Bank select mask + * R3 = sub-bank deposit values + * + * The cache has 2 Ways, and 64 sets, so we iterate through + * the sets, accessing the tag for each Way, for our Bank and + * sub-bank, looking for dirty, valid tags that match our + * address prefix. + */ + + P5.L = (DTEST_COMMAND & 0xFFFF); + P5.H = (DTEST_COMMAND >> 16); + P4.L = (DTEST_DATA0 & 0xFFFF); + P4.H = (DTEST_DATA0 >> 16); + + P0.L = page_prefix_table; + P0.H = page_prefix_table; + P1 = R1; + R5 = 0; /* Set counter*/ + P0 = P1 + P0; + R4 = [P0]; /* This is the address prefix*/ + + + /* We're reading (bit 1==0) the tag (bit 2==0), and we + * don't care about which double-word, since we're only + * fetching tags, so we only have to set Set, Bank, + * Sub-bank and Way. + */ + + P2 = 2; + LSETUP (fs1, fe1) LC1 = P2; +fs1: P0 = 64; /* iterate over all sets*/ + LSETUP (fs0, fe0) LC0 = P0; +fs0: R6 = R5 << 5; /* Combine set*/ + R6.H = R3.H << 0 ; /* and sub-bank*/ + R6 = R6 | R2; /* and Bank. Leave Way==0 at first.*/ + BITSET(R6,14); + [P5] = R6; /* Issue Command*/ + SSYNC; + R7 = [P4]; /* and read Tag.*/ + CC = BITTST(R7, 0); /* Check if valid*/ + IF !CC JUMP fskip; /* and skip if not.*/ + CC = BITTST(R7, 1); /* Check if dirty*/ + IF !CC JUMP fskip; /* and skip if not.*/ + + /* Compare against the page address. First, plant bits 13:12 + * into the tag, since those aren't part of the returned data. + */ + + R7 = DEPOSIT(R7, R3); /* set 13:12*/ + R1 = R7 & R4; /* Mask off lower bits*/ + CC = R1 == R0; /* Compare against page start.*/ + IF !CC JUMP fskip; /* Skip it if it doesn't match.*/ + + /* Tag address matches against page, so this is an entry + * we must flush. + */ + + R7 >>= 10; /* Mask off the non-address bits*/ + R7 <<= 10; + P3 = R7; + SSYNC; + FLUSHINV [P3]; /* And flush the entry*/ +fskip: +fe0: R5 += 1; /* Advance to next Set*/ +fe1: BITSET(R2, 26); /* Go to next Way.*/ + +dfinished: + SSYNC; /* Ensure the data gets out to mem.*/ + + /*Finished. Restore context.*/ + LB1 = [SP++]; + LT1 = [SP++]; + LC1 = [SP++]; + LB0 = [SP++]; + LT0 = [SP++]; + LC0 = [SP++]; + ( R7:0, P5:0 ) = [SP++]; + RTS; + +dflush_whole_page: + + /* It's a 1K or 4K page, so quicker to just flush the + * entire page. + */ + + P1 = 32; /* For 1K pages*/ + P2 = P1 << 2; /* For 4K pages*/ + P0 = R0; /* Start of page*/ + CC = BITTST(R1, 16); /* Whether 1K or 4K*/ + IF CC P1 = P2; + P1 += -1; /* Unroll one iteration*/ + SSYNC; + FLUSHINV [P0++]; /* because CSYNC can't end loops.*/ + LSETUP (eall, eall) LC0 = P1; +eall: FLUSHINV [P0++]; + SSYNC; + JUMP dfinished; + +.align 4; +page_prefix_table: +.byte4 0xFFFFFC00; /* 1K */ +.byte4 0xFFFFF000; /* 4K */ +.byte4 0xFFF00000; /* 1M */ +.byte4 0xFFC00000; /* 4M */ +.page_prefix_table.end: diff --git a/cpu/bf561/init_sdram.S b/cpu/bf561/init_sdram.S new file mode 100644 index 0000000..d763f27 --- /dev/null +++ b/cpu/bf561/init_sdram.S @@ -0,0 +1,171 @@ +#define ASSEMBLY + +#include <linux/config.h> +#include <config.h> +#include <asm/blackfin.h> +#include <asm/mem_init.h> +.global init_sdram; + +#if (CONFIG_CCLK_DIV == 1) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV1 +#endif +#if (CONFIG_CCLK_DIV == 2) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV2 +#endif +#if (CONFIG_CCLK_DIV == 4) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV4 +#endif +#if (CONFIG_CCLK_DIV == 8) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV8 +#endif +#ifndef CONFIG_CCLK_ACT_DIV +#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly +#endif + +init_sdram: + [--SP] = ASTAT; + [--SP] = RETS; + [--SP] = (R7:0); + [--SP] = (P5:0); + + /* + * PLL_LOCKCNT - how many SCLK Cycles to delay while PLL becomes stable + */ + p0.h = hi(PLL_LOCKCNT); + p0.l = lo(PLL_LOCKCNT); + r0 = 0x300(Z); + w[p0] = r0.l; + ssync; + + /* + * Put SDRAM in self-refresh, incase anything is running + */ + P2.H = hi(EBIU_SDGCTL); + P2.L = lo(EBIU_SDGCTL); + R0 = [P2]; + BITSET (R0, 24); + [P2] = R0; + SSYNC; + + /* + * Set PLL_CTL with the value that we calculate in R0 + * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors + * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK + * - [7] = output delay (add 200ps of delay to mem signals) + * - [6] = input delay (add 200ps of input delay to mem signals) + * - [5] = PDWN : 1=All Clocks off + * - [3] = STOPCK : 1=Core Clock off + * - [1] = PLL_OFF : 1=Disable Power to PLL + * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL + * all other bits set to zero + */ + + r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */ + r0 = r0 << 9; /* Shift it over, */ + r1 = CONFIG_CLKIN_HALF; /* Do we need to divide CLKIN by 2? */ + r0 = r1 | r0; + r1 = CONFIG_PLL_BYPASS; /* Bypass the PLL? */ + r1 = r1 << 8; /* Shift it over */ + r0 = r1 | r0; /* add them all together */ + + p0.h = hi(PLL_CTL); + p0.l = lo(PLL_CTL); /* Load the address */ + cli r2; /* Disable interrupts */ + ssync; + w[p0] = r0.l; /* Set the value */ + idle; /* Wait for the PLL to stablize */ + sti r2; /* Enable interrupts */ + +check_again: + p0.h = hi(PLL_STAT); + p0.l = lo(PLL_STAT); + R0 = W[P0](Z); + CC = BITTST(R0,5); + if ! CC jump check_again; + + /* Configure SCLK & CCLK Dividers */ + r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); + p0.h = hi(PLL_DIV); + p0.l = lo(PLL_DIV); + w[p0] = r0.l; + ssync; + + /* + * We now are running at speed, time to set the Async mem bank wait states + * This will speed up execution, since we are normally running from FLASH. + */ + + p2.h = (EBIU_AMBCTL1 >> 16); + p2.l = (EBIU_AMBCTL1 & 0xFFFF); + r0.h = (AMBCTL1VAL >> 16); + r0.l = (AMBCTL1VAL & 0xFFFF); + [p2] = r0; + ssync; + + p2.h = (EBIU_AMBCTL0 >> 16); + p2.l = (EBIU_AMBCTL0 & 0xFFFF); + r0.h = (AMBCTL0VAL >> 16); + r0.l = (AMBCTL0VAL & 0xFFFF); + [p2] = r0; + ssync; + + p2.h = (EBIU_AMGCTL >> 16); + p2.l = (EBIU_AMGCTL & 0xffff); + r0 = AMGCTLVAL; + w[p2] = r0; + ssync; + + /* + * Now, Initialize the SDRAM, + * start with the SDRAM Refresh Rate Control Register + */ + p0.l = lo(EBIU_SDRRC); + p0.h = hi(EBIU_SDRRC); + r0 = mem_SDRRC; + w[p0] = r0.l; + ssync; + + /* + * SDRAM Memory Bank Control Register - bank specific parameters + */ + p0.l = (EBIU_SDBCTL & 0xFFFF); + p0.h = (EBIU_SDBCTL >> 16); + r0 = mem_SDBCTL; + w[p0] = r0.l; + ssync; + + /* + * SDRAM Global Control Register - global programmable parameters + * Disable self-refresh + */ + P2.H = hi(EBIU_SDGCTL); + P2.L = lo(EBIU_SDGCTL); + R0 = [P2]; + BITCLR (R0, 24); + + /* + * Check if SDRAM is already powered up, if it is, enable self-refresh + */ + p0.h = hi(EBIU_SDSTAT); + p0.l = lo(EBIU_SDSTAT); + r2.l = w[p0]; + cc = bittst(r2,3); + if !cc jump skip; + NOP; + BITSET (R0, 23); +skip: + [P2] = R0; + SSYNC; + + /* Write in the new value in the register */ + R0.L = lo(mem_SDGCTL); + R0.H = hi(mem_SDGCTL); + [P2] = R0; + SSYNC; + nop; + + (P5:0) = [SP++]; + (R7:0) = [SP++]; + RETS = [SP++]; + ASTAT = [SP++]; + RTS; diff --git a/cpu/bf561/init_sdram_bootrom_initblock.S b/cpu/bf561/init_sdram_bootrom_initblock.S new file mode 100644 index 0000000..5e3c88a --- /dev/null +++ b/cpu/bf561/init_sdram_bootrom_initblock.S @@ -0,0 +1,185 @@ +#define ASSEMBLY + +#include <linux/config.h> +#include <config.h> +#include <asm/blackfin.h> +#include <asm/mem_init.h> +.global init_sdram; + +#if (CONFIG_CCLK_DIV == 1) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV1 +#endif +#if (CONFIG_CCLK_DIV == 2) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV2 +#endif +#if (CONFIG_CCLK_DIV == 4) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV4 +#endif +#if (CONFIG_CCLK_DIV == 8) +#define CONFIG_CCLK_ACT_DIV CCLK_DIV8 +#endif +#ifndef CONFIG_CCLK_ACT_DIV +#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly +#endif + +init_sdram: + [--SP] = ASTAT; + [--SP] = RETS; + [--SP] = (R7:0); + [--SP] = (P5:0); + + + p0.h = hi(SICA_IWR0); + p0.l = lo(SICA_IWR0); + r0.l = 0x1; + w[p0] = r0.l; + SSYNC; + + p0.h = hi(SPI_BAUD); + p0.l = lo(SPI_BAUD); + r0.l = CONFIG_SPI_BAUD_INITBLOCK; + w[p0] = r0.l; + SSYNC; + + /* + * PLL_LOCKCNT - how many SCLK Cycles to delay while PLL becomes stable + */ + p0.h = hi(PLL_LOCKCNT); + p0.l = lo(PLL_LOCKCNT); + r0 = 0x300(Z); + w[p0] = r0.l; + ssync; + + /* + * Put SDRAM in self-refresh, incase anything is running + */ + P2.H = hi(EBIU_SDGCTL); + P2.L = lo(EBIU_SDGCTL); + R0 = [P2]; + BITSET (R0, 24); + [P2] = R0; + SSYNC; + + /* + * Set PLL_CTL with the value that we calculate in R0 + * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors + * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK + * - [7] = output delay (add 200ps of delay to mem signals) + * - [6] = input delay (add 200ps of input delay to mem signals) + * - [5] = PDWN : 1=All Clocks off + * - [3] = STOPCK : 1=Core Clock off + * - [1] = PLL_OFF : 1=Disable Power to PLL + * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL + * all other bits set to zero + */ + + r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */ + r0 = r0 << 9; /* Shift it over, */ + r1 = CONFIG_CLKIN_HALF; /* Do we need to divide CLKIN by 2? */ + r0 = r1 | r0; + r1 = CONFIG_PLL_BYPASS; /* Bypass the PLL? */ + r1 = r1 << 8; /* Shift it over */ + r0 = r1 | r0; /* add them all together */ + + p0.h = hi(PLL_CTL); + p0.l = lo(PLL_CTL); /* Load the address */ + cli r2; /* Disable interrupts */ + ssync; + w[p0] = r0.l; /* Set the value */ + idle; /* Wait for the PLL to stablize */ + sti r2; /* Enable interrupts */ + +check_again: + p0.h = hi(PLL_STAT); + p0.l = lo(PLL_STAT); + R0 = W[P0](Z); + CC = BITTST(R0,5); + if ! CC jump check_again; + + /* Configure SCLK & CCLK Dividers */ + r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); + p0.h = hi(PLL_DIV); + p0.l = lo(PLL_DIV); + w[p0] = r0.l; + ssync; + + /* + * We now are running at speed, time to set the Async mem bank wait states + * This will speed up execution, since we are normally running from FLASH. + */ + + p2.h = (EBIU_AMBCTL1 >> 16); + p2.l = (EBIU_AMBCTL1 & 0xFFFF); + r0.h = (AMBCTL1VAL >> 16); + r0.l = (AMBCTL1VAL & 0xFFFF); + [p2] = r0; + ssync; + + p2.h = (EBIU_AMBCTL0 >> 16); + p2.l = (EBIU_AMBCTL0 & 0xFFFF); + r0.h = (AMBCTL0VAL >> 16); + r0.l = (AMBCTL0VAL & 0xFFFF); + [p2] = r0; + ssync; + + p2.h = (EBIU_AMGCTL >> 16); + p2.l = (EBIU_AMGCTL & 0xffff); + r0 = AMGCTLVAL; + w[p2] = r0; + ssync; + + /* + * Now, Initialize the SDRAM, + * start with the SDRAM Refresh Rate Control Register + */ + p0.l = lo(EBIU_SDRRC); + p0.h = hi(EBIU_SDRRC); + r0 = mem_SDRRC; + w[p0] = r0.l; + ssync; + + /* + * SDRAM Memory Bank Control Register - bank specific parameters + */ + p0.l = (EBIU_SDBCTL & 0xFFFF); + p0.h = (EBIU_SDBCTL >> 16); + r0 = mem_SDBCTL; + w[p0] = r0.l; + ssync; + + /* + * SDRAM Global Control Register - global programmable parameters + * Disable self-refresh + */ + P2.H = hi(EBIU_SDGCTL); + P2.L = lo(EBIU_SDGCTL); + R0 = [P2]; + BITCLR (R0, 24); + + /* + * Check if SDRAM is already powered up, if it is, enable self-refresh + */ + p0.h = hi(EBIU_SDSTAT); + p0.l = lo(EBIU_SDSTAT); + r2.l = w[p0]; + cc = bittst(r2,3); + if !cc jump skip; + NOP; + BITSET (R0, 23); +skip: + [P2] = R0; + SSYNC; + + /* Write in the new value in the register */ + R0.L = lo(mem_SDGCTL); + R0.H = hi(mem_SDGCTL); + [P2] = R0; + SSYNC; + nop; + + + (P5:0) = [SP++]; + (R7:0) = [SP++]; + RETS = [SP++]; + ASTAT = [SP++]; + RTS; diff --git a/cpu/bf561/interrupt.S b/cpu/bf561/interrupt.S new file mode 100644 index 0000000..f82fd9b --- /dev/null +++ b/cpu/bf561/interrupt.S @@ -0,0 +1,246 @@ +/* + * U-boot - interrupt.S Processing of interrupts and exception handling + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * This file is based on interrupt.S + * + * Copyright (C) 2003 Metrowerks, Inc. <mwaddel@metrowerks.com> + * Copyright (C) 2002 Arcturus Networks Ltd. Ted Ma <mated@sympatico.ca> + * Copyright (C) 1998 D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>, + * Kenneth Albanowski <kjahds@kjahds.com>, + * The Silver Hammer Group, Ltd. + * + * (c) 1995, Dionne & Associates + * (c) 1995, DKG Display Tech. + * + * This file is also based on exception.asm + * (C) Copyright 2001-2005 - Analog Devices, Inc. All rights reserved. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#define ASSEMBLY +#include <config.h> +#include <asm/blackfin.h> +#include <asm/hw_irq.h> +#include <asm/entry.h> +#include <asm/blackfin_defs.h> + +.global _blackfin_irq_panic; + +.text +.align 2 + +#ifndef CONFIG_KGDB +.global _evt_emulation +_evt_emulation: + SAVE_CONTEXT + r0 = IRQ_EMU; + r1 = seqstat; + sp += -12; + call _blackfin_irq_panic; + sp += 12; + rte; +#endif + +.global _evt_nmi +_evt_nmi: + SAVE_CONTEXT + r0 = IRQ_NMI; + r1 = RETN; + sp += -12; + call _blackfin_irq_panic; + sp += 12; + +_evt_nmi_exit: + rtn; + +.global _trap +_trap: + SAVE_ALL_SYS + r0 = sp; /* stack frame pt_regs pointer argument ==> r0 */ + sp += -12; + call _trap_c + sp += 12; + RESTORE_ALL_SYS + rtx; + +.global _evt_rst +_evt_rst: + SAVE_CONTEXT + r0 = IRQ_RST; + r1 = RETN; + sp += -12; + call _do_reset; + sp += 12; + +_evt_rst_exit: + rtn; + +irq_panic: + r0 = IRQ_EVX; + r1 = sp; + sp += -12; + call _blackfin_irq_panic; + sp += 12; + +.global _evt_ivhw +_evt_ivhw: + SAVE_CONTEXT + RAISE 14; + +_evt_ivhw_exit: + rti; + +.global _evt_timer +_evt_timer: + SAVE_CONTEXT + r0 = IRQ_CORETMR; + sp += -12; + /* Polling method used now. */ + /* call timer_int; */ + sp += 12; + RESTORE_CONTEXT + rti; + nop; + +.global _evt_evt7 +_evt_evt7: + SAVE_CONTEXT + r0 = 7; + sp += -12; + call _process_int; + sp += 12; + +evt_evt7_exit: + RESTORE_CONTEXT + rti; + +.global _evt_evt8 +_evt_evt8: + SAVE_CONTEXT + r0 = 8; + sp += -12; + call _process_int; + sp += 12; + +evt_evt8_exit: + RESTORE_CONTEXT + rti; + +.global _evt_evt9 +_evt_evt9: + SAVE_CONTEXT + r0 = 9; + sp += -12; + call _process_int; + sp += 12; + +evt_evt9_exit: + RESTORE_CONTEXT + rti; + +.global _evt_evt10 +_evt_evt10: + SAVE_CONTEXT + r0 = 10; + sp += -12; + call _process_int; + sp += 12; + +evt_evt10_exit: + RESTORE_CONTEXT + rti; + +.global _evt_evt11 +_evt_evt11: + SAVE_CONTEXT + r0 = 11; + sp += -12; + call _process_int; + sp += 12; + +evt_evt11_exit: + RESTORE_CONTEXT + rti; + +.global _evt_evt12 +_evt_evt12: + SAVE_CONTEXT + r0 = 12; + sp += -12; + call _process_int; + sp += 12; +evt_evt12_exit: + RESTORE_CONTEXT + rti; + +.global _evt_evt13 +_evt_evt13: + SAVE_CONTEXT + r0 = 13; + sp += -12; + call _process_int; + sp += 12; + +evt_evt13_exit: + RESTORE_CONTEXT + rti; + +.global _evt_system_call +_evt_system_call: + [--sp] = r0; + [--SP] = RETI; + r0 = [sp++]; + r0 += 2; + [--sp] = r0; + RETI = [SP++]; + r0 = [SP++]; + SAVE_CONTEXT + sp += -12; + call _exception_handle; + sp += 12; + RESTORE_CONTEXT + RTI; + +evt_system_call_exit: + rti; + +.global _evt_soft_int1 +_evt_soft_int1: + [--sp] = r0; + [--SP] = RETI; + r0 = [sp++]; + r0 += 2; + [--sp] = r0; + RETI = [SP++]; + r0 = [SP++]; + SAVE_CONTEXT + sp += -12; + call _exception_handle; + sp += 12; + RESTORE_CONTEXT + RTI; + +evt_soft_int1_exit: + rti; diff --git a/cpu/bf561/interrupts.c b/cpu/bf561/interrupts.c new file mode 100644 index 0000000..e314f60 --- /dev/null +++ b/cpu/bf561/interrupts.c @@ -0,0 +1,171 @@ +/* + * U-boot - interrupts.c Interrupt related routines + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * This file is based on interrupts.c + * Copyright 1996 Roman Zippel + * Copyright 1999 D. Jeff Dionne <jeff@uclinux.org> + * Copyright 2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca> + * Copyright 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca> + * Copyright 2003 Metrowerks/Motorola + * Copyright 2003 Bas Vermeulen <bas@buyways.nl>, + * BuyWays B.V. (www.buyways.nl) + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/machdep.h> +#include <asm/irq.h> +#include <config.h> +#include <asm/blackfin.h> +#include "cpu.h" + +static ulong timestamp; +static ulong last_time; +static int int_flag; + +int irq_flags; /* needed by asm-blackfin/system.h */ + +/* Functions just to satisfy the linker */ + +/* + * This function is derived from PowerPC code (read timebase as long long). + * On BF561 it just returns the timer value. + */ +unsigned long long get_ticks(void) +{ + return get_timer(0); +} + +/* + * This function is derived from PowerPC code (timebase clock frequency). + * On BF561 it returns the number of timer ticks per second. + */ +ulong get_tbclk(void) +{ + ulong tbclk; + + tbclk = CFG_HZ; + return tbclk; +} + +void enable_interrupts(void) +{ + restore_flags(int_flag); +} + +int disable_interrupts(void) +{ + save_and_cli(int_flag); + return 1; +} + +int interrupt_init(void) +{ + return (0); +} + +void udelay(unsigned long usec) +{ + unsigned long delay, start, stop; + unsigned long cclk; + cclk = (CONFIG_CCLK_HZ); + + while (usec > 1) { + /* + * how many clock ticks to delay? + * - request(in useconds) * clock_ticks(Hz) / useconds/second + */ + if (usec < 1000) { + delay = (usec * (cclk / 244)) >> 12; + usec = 0; + } else { + delay = (1000 * (cclk / 244)) >> 12; + usec -= 1000; + } + + asm volatile (" %0 = CYCLES;":"=r" (start)); + do { + asm volatile (" %0 = CYCLES; ":"=r" (stop)); + } while (stop - start < delay); + } + + return; +} + +void timer_init(void) +{ + *pTCNTL = 0x1; + *pTSCALE = 0x0; + *pTCOUNT = MAX_TIM_LOAD; + *pTPERIOD = MAX_TIM_LOAD; + *pTCNTL = 0x7; + asm("CSYNC;"); + + timestamp = 0; + last_time = 0; +} + +/* + * Any network command or flash + * command is started get_timer shall + * be called before TCOUNT gets reset, + * to implement the accurate timeouts. + * + * How ever milliconds doesn't return + * the number that has been elapsed from + * the last reset. + * + * As get_timer is used in the u-boot + * only for timeouts this should be + * sufficient + */ +ulong get_timer(ulong base) +{ + ulong milisec; + + /* Number of clocks elapsed */ + ulong clocks = (MAX_TIM_LOAD - (*pTCOUNT)); + + /* + * Find if the TCOUNT is reset + * timestamp gives the number of times + * TCOUNT got reset + */ + if (clocks < last_time) + timestamp++; + last_time = clocks; + + /* Get the number of milliseconds */ + milisec = clocks / (CONFIG_CCLK_HZ / 1000); + + /* + * Find the number of millisonds + * that got elapsed before this TCOUNT + * cycle + */ + milisec += timestamp * (MAX_TIM_LOAD / (CONFIG_CCLK_HZ / 1000)); + + return (milisec - base); +} diff --git a/cpu/bf561/ints.c b/cpu/bf561/ints.c new file mode 100644 index 0000000..328e5d8 --- /dev/null +++ b/cpu/bf561/ints.c @@ -0,0 +1,117 @@ +/* + * U-boot - ints.c Interrupt related routines + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * This file is based on ints.c + * + * Apr18 2003, Changed by HuTao to support interrupt cascading for Blackfin + * drivers + * + * Copyright 1996 Roman Zippel + * Copyright 1999 D. Jeff Dionne <jeff@uclinux.org> + * Copyright 2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca> + * Copyright 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca> + * Copyright 2003 Metrowerks/Motorola + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <linux/stddef.h> +#include <asm/system.h> +#include <asm/irq.h> +#include <asm/traps.h> +#include <asm/io.h> +#include <asm/errno.h> +#include <asm/machdep.h> +#include <asm/setup.h> +#include <asm/blackfin.h> +#include "cpu.h" + +void blackfin_irq_panic(int reason, struct pt_regs *regs) +{ + printf("\n\nException: IRQ 0x%x entered\n", reason); + printf("code=[0x%x], ", (unsigned int)(regs->seqstat & 0x3f)); + printf("stack frame=0x%x, ", (unsigned int)regs); + printf("bad PC=0x%04x\n", (unsigned int)regs->pc); + dump(regs); + printf("Unhandled IRQ or exceptions!\n"); + printf("Please reset the board \n"); +} + +void blackfin_init_IRQ(void) +{ + *(unsigned volatile long *)(SIC_IMASK) = SIC_UNMASK_ALL; + cli(); +#ifndef CONFIG_KGDB + *(unsigned volatile long *)(EVT_EMULATION_ADDR) = 0x0; +#endif + *(unsigned volatile long *)(EVT_NMI_ADDR) = + (unsigned volatile long)evt_nmi; + *(unsigned volatile long *)(EVT_EXCEPTION_ADDR) = + (unsigned volatile long)trap; + *(unsigned volatile long *)(EVT_HARDWARE_ERROR_ADDR) = + (unsigned volatile long)evt_ivhw; + *(unsigned volatile long *)(EVT_RESET_ADDR) = + (unsigned volatile long)evt_rst; + *(unsigned volatile long *)(EVT_TIMER_ADDR) = + (unsigned volatile long)evt_timer; + *(unsigned volatile long *)(EVT_IVG7_ADDR) = + (unsigned volatile long)evt_evt7; + *(unsigned volatile long *)(EVT_IVG8_ADDR) = + (unsigned volatile long)evt_evt8; + *(unsigned volatile long *)(EVT_IVG9_ADDR) = + (unsigned volatile long)evt_evt9; + *(unsigned volatile long *)(EVT_IVG10_ADDR) = + (unsigned volatile long)evt_evt10; + *(unsigned volatile long *)(EVT_IVG11_ADDR) = + (unsigned volatile long)evt_evt11; + *(unsigned volatile long *)(EVT_IVG12_ADDR) = + (unsigned volatile long)evt_evt12; + *(unsigned volatile long *)(EVT_IVG13_ADDR) = + (unsigned volatile long)evt_evt13; + *(unsigned volatile long *)(EVT_IVG14_ADDR) = + (unsigned volatile long)evt_system_call; + *(unsigned volatile long *)(EVT_IVG15_ADDR) = + (unsigned volatile long)evt_soft_int1; + *(volatile unsigned long *)ILAT = 0; + asm("csync;"); + sti(); + *(volatile unsigned long *)IMASK = 0xffbf; + asm("csync;"); +} + +void exception_handle(void) +{ +#if defined (CONFIG_PANIC_HANG) + display_excp(); +#else + udelay(100000); /* allow messages to go out */ + do_reset(NULL, 0, 0, NULL); +#endif +} + +void display_excp(void) +{ + printf("Exception!\n"); +} diff --git a/cpu/bf561/serial.c b/cpu/bf561/serial.c new file mode 100644 index 0000000..baec1d3 --- /dev/null +++ b/cpu/bf561/serial.c @@ -0,0 +1,196 @@ +/* + * U-boot - serial.c Serial driver for BF561 + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * This file is based on + * bf533_serial.c: Serial driver for BlackFin BF533 DSP internal UART. + * Copyright (c) 2003 Bas Vermeulen <bas@buyways.nl>, + * BuyWays B.V. (www.buyways.nl) + * + * Based heavily on blkfinserial.c + * blkfinserial.c: Serial driver for BlackFin DSP internal USRTs. + * Copyright(c) 2003 Metrowerks <mwaddel@metrowerks.com> + * Copyright(c) 2001 Tony Z. Kou <tonyko@arcturusnetworks.com> + * Copyright(c) 2001-2002 Arcturus Networks Inc. <www.arcturusnetworks.com> + * + * Based on code from 68328 version serial driver imlpementation which was: + * Copyright (C) 1995 David S. Miller <davem@caip.rutgers.edu> + * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com> + * Copyright (C) 1998, 1999 D. Jeff Dionne <jeff@uclinux.org> + * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com> + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/irq.h> +#include <asm/system.h> +#include <asm/segment.h> +#include <asm/bitops.h> +#include <asm/delay.h> +#include <asm/uaccess.h> +#include "serial.h" +#include <asm/io.h> + +unsigned long pll_div_fact; + +void calc_baud(void) +{ + unsigned char i; + int temp; + u_long sclk = get_sclk(); + + for (i = 0; i < sizeof(baud_table) / sizeof(int); i++) { + temp = sclk / (baud_table[i] * 8); + if ((temp & 0x1) == 1) { + temp++; + } + temp = temp / 2; + hw_baud_table[i].dl_high = (temp >> 8) & 0xFF; + hw_baud_table[i].dl_low = (temp) & 0xFF; + } +} + +void serial_setbrg(void) +{ + int i; + DECLARE_GLOBAL_DATA_PTR; + + calc_baud(); + + for (i = 0; i < sizeof(baud_table) / sizeof(int); i++) { + if (gd->baudrate == baud_table[i]) + break; + } + + /* Enable UART */ + *pUART_GCTL |= UART_GCTL_UCEN; + sync(); + + /* Set DLAB in LCR to Access DLL and DLH */ + ACCESS_LATCH; + sync(); + + *pUART_DLL = hw_baud_table[i].dl_low; + sync(); + *pUART_DLH = hw_baud_table[i].dl_high; + sync(); + + /* Clear DLAB in LCR to Access THR RBR IER */ + ACCESS_PORT_IER; + sync(); + + /* + * Enable ERBFI and ELSI interrupts + * to poll SIC_ISR register + */ + *pUART_IER = UART_IER_ELSI | UART_IER_ERBFI | UART_IER_ETBEI; + sync(); + + /* Set LCR to Word Lengh 8-bit word select */ + *pUART_LCR = UART_LCR_WLS8; + sync(); + + return; +} + +int serial_init(void) +{ + serial_setbrg(); + return (0); +} + +void serial_putc(const char c) +{ + if ((*pUART_LSR) & UART_LSR_TEMT) { + if (c == '\n') + serial_putc('\r'); + + local_put_char(c); + } + + while (!((*pUART_LSR) & UART_LSR_TEMT)) + SYNC_ALL; + + return; +} + +int serial_tstc(void) +{ + if (*pUART_LSR & UART_LSR_DR) + return 1; + else + return 0; +} + +int serial_getc(void) +{ + unsigned short uart_lsr_val, uart_rbr_val; + unsigned long isr_val; + int ret; + + /* Poll for RX Interrupt */ + while (!((isr_val = + *(volatile unsigned long *)SIC_ISR) & IRQ_UART_RX_BIT)) ; + asm("csync;"); + + uart_lsr_val = *pUART_LSR; /* Clear status bit */ + uart_rbr_val = *pUART_RBR; /* getc() */ + + if (isr_val & IRQ_UART_ERROR_BIT) { + ret = -1; + } else { + ret = uart_rbr_val & 0xff; + } + + return ret; +} + +void serial_puts(const char *s) +{ + while (*s) { + serial_putc(*s++); + } +} + +static void local_put_char(char ch) +{ + int flags = 0; + unsigned long isr_val; + + save_and_cli(flags); + + /* Poll for TX Interruput */ + while (!((isr_val = *pSIC_ISR) & IRQ_UART_TX_BIT)) ; + asm("csync;"); + + *pUART_THR = ch; /* putc() */ + + if (isr_val & IRQ_UART_ERROR_BIT) { + printf("?"); + } + + restore_flags(flags); + + return; +} diff --git a/cpu/bf561/serial.h b/cpu/bf561/serial.h new file mode 100644 index 0000000..98c1242 --- /dev/null +++ b/cpu/bf561/serial.h @@ -0,0 +1,77 @@ +/* + * U-boot - bf561_serial.h Serial Driver defines + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * This file is based on + * bf533_serial.h: Definitions for the BlackFin BF533 DSP serial driver. + * Copyright (C) 2003 Bas Vermeulen <bas@buyways.nl> + * BuyWays B.V. (www.buyways.nl) + * + * Based heavily on: + * blkfinserial.h: Definitions for the BlackFin DSP serial driver. + * + * Copyright (C) 2001 Tony Z. Kou tonyko@arcturusnetworks.com + * Copyright (C) 2001 Arcturus Networks Inc. <www.arcturusnetworks.com> + * + * Based on code from 68328serial.c which was: + * Copyright (C) 1995 David S. Miller <davem@caip.rutgers.edu> + * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com> + * Copyright (C) 1998, 1999 D. Jeff Dionne <jeff@uclinux.org> + * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com> + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _Bf561_SERIAL_H +#define _Bf561_SERIAL_H + +#include <linux/config.h> +#include <asm/blackfin.h> + +#define SYNC_ALL __asm__ __volatile__ ("ssync;\n") +#define ACCESS_LATCH *pUART_LCR |= UART_LCR_DLAB; +#define ACCESS_PORT_IER *pUART_LCR &= (~UART_LCR_DLAB); + +void serial_setbrg(void); +static void local_put_char(char ch); +void calc_baud(void); +void serial_setbrg(void); +int serial_init(void); +void serial_putc(const char c); +int serial_tstc(void); +int serial_getc(void); +void serial_puts(const char *s); +static void local_put_char(char ch); + +int baud_table[5] = { 9600, 19200, 38400, 57600, 115200 }; + +struct { + unsigned char dl_high; + unsigned char dl_low; +} hw_baud_table[5]; + +#ifdef CONFIG_STAMP +extern unsigned long pll_div_fact; +#endif + +#endif diff --git a/cpu/bf561/start.S b/cpu/bf561/start.S new file mode 100644 index 0000000..9333648 --- /dev/null +++ b/cpu/bf561/start.S @@ -0,0 +1,311 @@ +/* + * U-boot - start.S Startup file of u-boot for BF533/BF561 + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * This file is based on head.S + * Copyright (c) 2003 Metrowerks/Motorola + * Copyright (C) 1998 D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>, + * Kenneth Albanowski <kjahds@kjahds.com>, + * The Silver Hammer Group, Ltd. + * (c) 1995, Dionne & Associates + * (c) 1995, DKG Display Tech. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Note: A change in this file subsequently requires a change in + * board/$(board_name)/config.mk for a valid u-boot.bin + */ + +#define ASSEMBLY + +#include <linux/config.h> +#include <config.h> +#include <asm/blackfin.h> + +.global _stext; +.global __bss_start; +.global start; +.global _start; +.global _rambase; +.global _ramstart; +.global _ramend; +.global edata; +.global _initialize; +.global _exit; +.global flashdataend; +.global init_sdram; + +.text +_start: +start: +_stext: + + R0 = 0x32; + SYSCFG = R0; + SSYNC; + + /* + * As per HW reference manual DAG registers, + * DATA and Address resgister shall be zero'd + * in initialization, after a reset state + */ + r1 = 0; /* Data registers zero'd */ + r2 = 0; + r3 = 0; + r4 = 0; + r5 = 0; + r6 = 0; + r7 = 0; + + p0 = 0; /* Address registers zero'd */ + p1 = 0; + p2 = 0; + p3 = 0; + p4 = 0; + p5 = 0; + + i0 = 0; /* DAG Registers zero'd */ + i1 = 0; + i2 = 0; + i3 = 0; + m0 = 0; + m1 = 0; + m3 = 0; + m3 = 0; + l0 = 0; + l1 = 0; + l2 = 0; + l3 = 0; + b0 = 0; + b1 = 0; + b2 = 0; + b3 = 0; + + /* + * Set loop counters to zero, to make sure that + * hw loops are disabled. + */ + r0 = 0; + lc0 = r0; + lc1 = r0; + + SSYNC; + + /* Check soft reset status */ + p0.h = SWRST >> 16; + p0.l = SWRST & 0xFFFF; + r0.l = w[p0]; + + cc = bittst(r0, 15); + if !cc jump no_soft_reset; + + /* Clear Soft reset */ + r0 = 0x0000; + w[p0] = r0; + ssync; + +no_soft_reset: + nop; + + /* Clear EVT registers */ + p0.h = (EVT_EMULATION_ADDR >> 16); + p0.l = (EVT_EMULATION_ADDR & 0xFFFF); + p0 += 8; + p1 = 14; + r1 = 0; + LSETUP(4,4) lc0 = p1; + [ p0 ++ ] = r1; + + p0.h = hi(SIC_IWR); + p0.l = lo(SIC_IWR); + r0.l = 0x1; + w[p0] = r0.l; + SSYNC; + + sp.l = (0xffb01000 & 0xFFFF); + sp.h = (0xffb01000 >> 16); + + /* + * Check if the code is in SDRAM + * If the code is in SDRAM, skip SDRAM initializaiton + */ + call get_pc; + r3.l = 0x0; + r3.h = 0x2000; + cc = r0 < r3 (iu); + if cc jump sdram_initialized; + call init_sdram; + /* relocate into to RAM */ +sdram_initialized: + call get_pc; +offset: + r2.l = offset; + r2.h = offset; + r3.l = start; + r3.h = start; + r1 = r2 - r3; + + r0 = r0 - r1; + p1 = r0; + + p2.l = (CFG_MONITOR_BASE & 0xffff); + p2.h = (CFG_MONITOR_BASE >> 16); + + p3 = 0x04; + p4.l = ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) & 0xffff); + p4.h = ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) >> 16); +loop1: + r1 = [p1 ++ p3]; + [p2 ++ p3] = r1; + cc=p2==p4; + if !cc jump loop1; + /* + * configure STACK + */ + r0.h = (CONFIG_STACKBASE >> 16); + r0.l = (CONFIG_STACKBASE & 0xFFFF); + sp = r0; + fp = sp; + + /* + * This next section keeps the processor in supervisor mode + * during kernel boot. Switches to user mode at end of boot. + * See page 3-9 of Hardware Reference manual for documentation. + */ + + /* To keep ourselves in the supervisor mode */ + p0.l = (EVT_IVG15_ADDR & 0xFFFF); + p0.h = (EVT_IVG15_ADDR >> 16); + + p1.l = _real_start; + p1.h = _real_start; + [p0] = p1; + + p0.l = (IMASK & 0xFFFF); + p0.h = (IMASK >> 16); + r0.l = LO(IVG15_POS); + r0.h = HI(IVG15_POS); + [p0] = r0; + raise 15; + p0.l = WAIT_HERE; + p0.h = WAIT_HERE; + reti = p0; + rti; + +WAIT_HERE: + jump WAIT_HERE; + +.global _real_start; +_real_start: + [ -- sp ] = reti; + +#ifdef CONFIG_EZKIT561 + p0.l = (WDOG_CTL & 0xFFFF); + p0.h = (WDOG_CTL >> 16); + r0 = WATCHDOG_DISABLE(z); + w[p0] = r0; +#endif + + /* DMA reset code to Hi of L1 SRAM */ +copy: + P1.H = hi(SYSMMR_BASE); /* P1 Points to the beginning of SYSTEM MMR Space */ + P1.L = lo(SYSMMR_BASE); + + R0.H = reset_start; /* Source Address (high) */ + R0.L = reset_start; /* Source Address (low) */ + R1.H = reset_end; + R1.L = reset_end; + R2 = R1 - R0; /* Count */ + R1.H = hi(L1_ISRAM); /* Destination Address (high) */ + R1.L = lo(L1_ISRAM); /* Destination Address (low) */ + R3.L = DMAEN; /* Source DMAConfig Value (8-bit words) */ + R4.L = (DI_EN | WNR | DMAEN); /* Destination DMAConfig Value (8-bit words) */ + +DMA: + R6 = 0x1 (Z); + W[P1+OFFSET_(MDMA_S0_X_MODIFY)] = R6; /* Source Modify = 1 */ + W[P1+OFFSET_(MDMA_D0_X_MODIFY)] = R6; /* Destination Modify = 1 */ + + [P1+OFFSET_(MDMA_S0_START_ADDR)] = R0; /* Set Source Base Address */ + W[P1+OFFSET_(MDMA_S0_X_COUNT)] = R2; /* Set Source Count */ + /* Set Source DMAConfig = DMA Enable, + Memory Read, 8-Bit Transfers, 1-D DMA, Flow - Stop */ + W[P1+OFFSET_(MDMA_S0_CONFIG)] = R3; + + [P1+OFFSET_(MDMA_D0_START_ADDR)] = R1; /* Set Destination Base Address */ + W[P1+OFFSET_(MDMA_D0_X_COUNT)] = R2; /* Set Destination Count */ + /* Set Destination DMAConfig = DMA Enable, + Memory Write, 8-Bit Transfers, 1-D DMA, Flow - Stop, IOC */ + W[P1+OFFSET_(MDMA_D0_CONFIG)] = R4; + +WAIT_DMA_DONE: + p0.h = hi(MDMA_D0_IRQ_STATUS); + p0.l = lo(MDMA_D0_IRQ_STATUS); + R0 = W[P0](Z); + CC = BITTST(R0, 0); + if ! CC jump WAIT_DMA_DONE + + R0 = 0x1; + W[P1+OFFSET_(MDMA_D0_IRQ_STATUS)] = R0; /* Write 1 to clear DMA interrupt */ + + /* Initialize BSS Section with 0 s */ + p1.l = __bss_start; + p1.h = __bss_start; + p2.l = _end; + p2.h = _end; + r1 = p1; + r2 = p2; + r3 = r2 - r1; + r3 = r3 >> 2; + p3 = r3; + lsetup (_clear_bss, _clear_bss_end ) lc1 = p3; + CC = p2<=p1; + if CC jump _clear_bss_skip; + r0 = 0; +_clear_bss: +_clear_bss_end: + [p1++] = r0; +_clear_bss_skip: + + p0.l = _start1; + p0.h = _start1; + jump (p0); + +reset_start: + p0.h = WDOG_CNT >> 16; + p0.l = WDOG_CNT & 0xffff; + r0 = 0x0010; + w[p0] = r0; + p0.h = WDOG_CTL >> 16; + p0.l = WDOG_CTL & 0xffff; + r0 = 0x0000; + w[p0] = r0; +reset_wait: + jump reset_wait; + +reset_end: nop; + +_exit: + jump.s _exit; +get_pc: + r0 = rets; + rts; diff --git a/cpu/bf561/start1.S b/cpu/bf561/start1.S new file mode 100644 index 0000000..72cfafb --- /dev/null +++ b/cpu/bf561/start1.S @@ -0,0 +1,38 @@ +/* + * U-boot - start1.S Code running out of RAM after relocation + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#define ASSEMBLY +#include <linux/config.h> +#include <config.h> +#include <asm/blackfin.h> + +.global start1; +.global _start1; + +.text +_start1: +start1: + sp += -12; + call _board_init_f; + sp += 12; diff --git a/cpu/bf561/traps.c b/cpu/bf561/traps.c new file mode 100644 index 0000000..f5ff3a8 --- /dev/null +++ b/cpu/bf561/traps.c @@ -0,0 +1,239 @@ +/* + * U-boot - traps.c Routines related to interrupts and exceptions + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * This file is based on + * No original Copyright holder listed, + * Probabily original (C) Roman Zippel (assigned DJD, 1999) + * + * Copyright 2003 Metrowerks - for Blackfin + * Copyright 2000-2001 Lineo, Inc. D. Jeff Dionne <jeff@lineo.ca> + * Copyright 1999-2000 D. Jeff Dionne, <jeff@uclinux.org> + * + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <linux/types.h> +#include <asm/errno.h> +#include <asm/irq.h> +#include <asm/system.h> +#include <asm/traps.h> +#include <asm/machdep.h> +#include "cpu.h" +#include <asm/arch/anomaly.h> +#include <asm/cplb.h> +#include <asm/io.h> + +void init_IRQ(void) +{ + blackfin_init_IRQ(); + return; +} + +void process_int(unsigned long vec, struct pt_regs *fp) +{ + printf("interrupt\n"); + return; +} + +extern unsigned int icplb_table[page_descriptor_table_size][2]; +extern unsigned int dcplb_table[page_descriptor_table_size][2]; + +unsigned long last_cplb_fault_retx; + +static unsigned int cplb_sizes[4] = + { 1024, 4 * 1024, 1024 * 1024, 4 * 1024 * 1024 }; + +void trap_c(struct pt_regs *regs) +{ + unsigned int addr; + unsigned long trapnr = (regs->seqstat) & SEQSTAT_EXCAUSE; + unsigned int i, j, size, *I0, *I1; + unsigned short data = 0; + + switch (trapnr) { + /* 0x26 - Data CPLB Miss */ + case VEC_CPLB_M: + +#ifdef ANOMALY_05000261 + /* + * Work around an anomaly: if we see a new DCPLB fault, return + * without doing anything. Then, if we get the same fault again, + * handle it. + */ + addr = last_cplb_fault_retx; + last_cplb_fault_retx = regs->retx; + printf("this time, curr = 0x%08x last = 0x%08x\n", addr, + last_cplb_fault_retx); + if (addr != last_cplb_fault_retx) + goto trap_c_return; +#endif + data = 1; + + case VEC_CPLB_I_M: + + if (data) + addr = *pDCPLB_FAULT_ADDR; + else + addr = *pICPLB_FAULT_ADDR; + + for (i = 0; i < page_descriptor_table_size; i++) { + if (data) { + size = cplb_sizes[dcplb_table[i][1] >> 16]; + j = dcplb_table[i][0]; + } else { + size = cplb_sizes[icplb_table[i][1] >> 16]; + j = icplb_table[i][0]; + } + if ((j <= addr) && ((j + size) > addr)) { + debug("found %i 0x%08x\n", i, j); + break; + } + } + if (i == page_descriptor_table_size) { + printf("something is really wrong\n"); + do_reset(NULL, 0, 0, NULL); + } + + /* Turn the cache off */ + if (data) { + sync(); + asm(" .align 8; "); + *(unsigned int *)DMEM_CONTROL &= + ~(ACACHE_BCACHE | ENDCPLB | PORT_PREF0); + sync(); + } else { + sync(); + asm(" .align 8; "); + *(unsigned int *)IMEM_CONTROL &= ~(IMC | ENICPLB); + sync(); + } + + if (data) { + I0 = (unsigned int *)DCPLB_ADDR0; + I1 = (unsigned int *)DCPLB_DATA0; + } else { + I0 = (unsigned int *)ICPLB_ADDR0; + I1 = (unsigned int *)ICPLB_DATA0; + } + + j = 0; + while (*I1 & CPLB_LOCK) { + debug("skipping %i %08p - %08x\n", j, I1, *I1); + *I0++; + *I1++; + j++; + } + + debug("remove %i 0x%08x 0x%08x\n", j, *I0, *I1); + + for (; j < 15; j++) { + debug("replace %i 0x%08x 0x%08x\n", j, I0, I0 + 1); + *I0++ = *(I0 + 1); + *I1++ = *(I1 + 1); + } + + if (data) { + *I0 = dcplb_table[i][0]; + *I1 = dcplb_table[i][1]; + I0 = (unsigned int *)DCPLB_ADDR0; + I1 = (unsigned int *)DCPLB_DATA0; + } else { + *I0 = icplb_table[i][0]; + *I1 = icplb_table[i][1]; + I0 = (unsigned int *)ICPLB_ADDR0; + I1 = (unsigned int *)ICPLB_DATA0; + } + + for (j = 0; j < 16; j++) { + debug("%i 0x%08x 0x%08x\n", j, *I0++, *I1++); + } + + /* Turn the cache back on */ + if (data) { + j = *(unsigned int *)DMEM_CONTROL; + sync(); + asm(" .align 8; "); + *(unsigned int *)DMEM_CONTROL = + ACACHE_BCACHE | ENDCPLB | PORT_PREF0 | j; + sync(); + } else { + sync(); + asm(" .align 8; "); + *(unsigned int *)IMEM_CONTROL = IMC | ENICPLB; + sync(); + } + + break; + default: + /* All traps come here */ + printf("code=[0x%x], ", (unsigned int)(regs->seqstat & 0x3f)); + printf("stack frame=0x%x, ", (unsigned int)regs); + printf("bad PC=0x%04x\n", (unsigned int)regs->pc); + dump(regs); + printf("\n\n"); + + printf("Unhandled IRQ or exceptions!\n"); + printf("Please reset the board \n"); + do_reset(NULL, 0, 0, NULL); + } + +trap_c_return: + return; + +} + +void dump(struct pt_regs *fp) +{ + debug("RETE: %08lx RETN: %08lx RETX: %08lx RETS: %08lx\n", fp->rete, + fp->retn, fp->retx, fp->rets); + debug("IPEND: %04lx SYSCFG: %04lx\n", fp->ipend, fp->syscfg); + debug("SEQSTAT: %08lx SP: %08lx\n", (long)fp->seqstat, (long)fp); + debug("R0: %08lx R1: %08lx R2: %08lx R3: %08lx\n", fp->r0, + fp->r1, fp->r2, fp->r3); + debug("R4: %08lx R5: %08lx R6: %08lx R7: %08lx\n", fp->r4, + fp->r5, fp->r6, fp->r7); + debug("P0: %08lx P1: %08lx P2: %08lx P3: %08lx\n", fp->p0, + fp->p1, fp->p2, fp->p3); + debug("P4: %08lx P5: %08lx FP: %08lx\n", fp->p4, fp->p5, fp->fp); + debug("A0.w: %08lx A0.x: %08lx A1.w: %08lx A1.x: %08lx\n", + fp->a0w, fp->a0x, fp->a1w, fp->a1x); + + debug("LB0: %08lx LT0: %08lx LC0: %08lx\n", fp->lb0, fp->lt0, + fp->lc0); + debug("LB1: %08lx LT1: %08lx LC1: %08lx\n", fp->lb1, fp->lt1, + fp->lc1); + debug("B0: %08lx L0: %08lx M0: %08lx I0: %08lx\n", fp->b0, fp->l0, + fp->m0, fp->i0); + debug("B1: %08lx L1: %08lx M1: %08lx I1: %08lx\n", fp->b1, fp->l1, + fp->m1, fp->i1); + debug("B2: %08lx L2: %08lx M2: %08lx I2: %08lx\n", fp->b2, fp->l2, + fp->m2, fp->i2); + debug("B3: %08lx L3: %08lx M3: %08lx I3: %08lx\n", fp->b3, fp->l3, + fp->m3, fp->i3); + + debug("DCPLB_FAULT_ADDR=%p\n", *pDCPLB_FAULT_ADDR); + debug("ICPLB_FAULT_ADDR=%p\n", *pICPLB_FAULT_ADDR); + +} diff --git a/cpu/bf561/video.c b/cpu/bf561/video.c new file mode 100644 index 0000000..3ff0151 --- /dev/null +++ b/cpu/bf561/video.c @@ -0,0 +1,194 @@ +/* + * (C) Copyright 2000 + * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it + * (C) Copyright 2002 + * Wolfgang Denk, wd@denx.de + * (C) Copyright 2006 + * Aubrey Li, aubrey.li@analog.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <stdarg.h> +#include <common.h> +#include <config.h> +#include <asm/blackfin.h> +#include <i2c.h> +#include <linux/types.h> +#include <devices.h> + +#ifdef CONFIG_VIDEO +#define NTSC_FRAME_ADDR 0x06000000 +#include "video.h" + +/* NTSC OUTPUT SIZE 720 * 240 */ +#define VERTICAL 2 +#define HORIZONTAL 4 + +int is_vblank_line(const int line) +{ + /* + * This array contains a single bit for each line in + * an NTSC frame. + */ + if ((line <= 18) || (line >= 264 && line <= 281) || (line == 528)) + return true; + + return false; +} + +int NTSC_framebuffer_init(char *base_address) +{ + const int NTSC_frames = 1; + const int NTSC_lines = 525; + char *dest = base_address; + int frame_num, line_num; + + for (frame_num = 0; frame_num < NTSC_frames; ++frame_num) { + for (line_num = 1; line_num <= NTSC_lines; ++line_num) { + unsigned int code; + int offset = 0; + int i; + + if (is_vblank_line(line_num)) + offset++; + + if (line_num > 266 || line_num < 3) + offset += 2; + + /* Output EAV code */ + code = SystemCodeMap[offset].EAV; + write_dest_byte((char)(code >> 24) & 0xff); + write_dest_byte((char)(code >> 16) & 0xff); + write_dest_byte((char)(code >> 8) & 0xff); + write_dest_byte((char)(code) & 0xff); + + /* Output horizontal blanking */ + for (i = 0; i < 67 * 2; ++i) { + write_dest_byte(0x80); + write_dest_byte(0x10); + } + + /* Output SAV */ + code = SystemCodeMap[offset].SAV; + write_dest_byte((char)(code >> 24) & 0xff); + write_dest_byte((char)(code >> 16) & 0xff); + write_dest_byte((char)(code >> 8) & 0xff); + write_dest_byte((char)(code) & 0xff); + + /* Output empty horizontal data */ + for (i = 0; i < 360 * 2; ++i) { + write_dest_byte(0x80); + write_dest_byte(0x10); + } + } + } + + return dest - base_address; +} + +void fill_frame(char *Frame, int Value) +{ + int *OddPtr32; + int OddLine; + int *EvenPtr32; + int EvenLine; + int i; + int *data; + int m, n; + + /* fill odd and even frames */ + for (OddLine = 22, EvenLine = 285; OddLine < 263; OddLine++, EvenLine++) { + OddPtr32 = (int *)((Frame + (OddLine * 1716)) + 276); + EvenPtr32 = (int *)((Frame + (EvenLine * 1716)) + 276); + for (i = 0; i < 360; i++, OddPtr32++, EvenPtr32++) { + *OddPtr32 = Value; + *EvenPtr32 = Value; + } + } + + for (m = 0; m < VERTICAL; m++) { + data = (int *)u_boot_logo.data; + for (OddLine = (22 + m), EvenLine = (285 + m); + OddLine < (u_boot_logo.height * VERTICAL) + (22 + m); + OddLine += VERTICAL, EvenLine += VERTICAL) { + OddPtr32 = (int *)((Frame + ((OddLine) * 1716)) + 276); + EvenPtr32 = + (int *)((Frame + ((EvenLine) * 1716)) + 276); + for (i = 0; i < u_boot_logo.width / 2; i++) { + /* enlarge one pixel to m x n */ + for (n = 0; n < HORIZONTAL; n++) { + *OddPtr32++ = *data; + *EvenPtr32++ = *data; + } + data++; + } + } + } +} + +void video_putc(const char c) +{ +} + +void video_puts(const char *s) +{ +} + +static int video_init(void) +{ + char *NTSCFrame; + NTSCFrame = (char *)NTSC_FRAME_ADDR; + NTSC_framebuffer_init(NTSCFrame); + fill_frame(NTSCFrame, BLUE); + + *pPPI_CONTROL = 0x0082; + *pPPI_FRAME = 0x020D; + + *pDMA0_START_ADDR = NTSCFrame; + *pDMA0_X_COUNT = 0x035A; + *pDMA0_X_MODIFY = 0x0002; + *pDMA0_Y_COUNT = 0x020D; + *pDMA0_Y_MODIFY = 0x0002; + *pDMA0_CONFIG = 0x1015; + *pPPI_CONTROL = 0x0083; + return 0; +} + +int drv_video_init(void) +{ + int error, devices = 1; + + device_t videodev; + + video_init(); /* Video initialization */ + + memset(&videodev, 0, sizeof(videodev)); + + strcpy(videodev.name, "video"); + videodev.ext = DEV_EXT_VIDEO; /* Video extensions */ + videodev.flags = DEV_FLAGS_OUTPUT; /* Output only */ + videodev.putc = video_putc; /* 'putc' function */ + videodev.puts = video_puts; /* 'puts' function */ + + error = device_register(&videodev); + + return (error == 0) ? devices : error; +} +#endif diff --git a/cpu/bf561/video.h b/cpu/bf561/video.h new file mode 100644 index 0000000..d237f6a --- /dev/null +++ b/cpu/bf561/video.h @@ -0,0 +1,25 @@ +#include <video_logo.h> +#define write_dest_byte(val) {*dest++=val;} +#define BLACK (0x01800180) /* black pixel pattern */ +#define BLUE (0x296E29F0) /* blue pixel pattern */ +#define RED (0x51F0515A) /* red pixel pattern */ +#define MAGENTA (0x6ADE6ACA) /* magenta pixel pattern */ +#define GREEN (0x91229136) /* green pixel pattern */ +#define CYAN (0xAA10AAA6) /* cyan pixel pattern */ +#define YELLOW (0xD292D210) /* yellow pixel pattern */ +#define WHITE (0xFE80FE80) /* white pixel pattern */ + +#define true 1 +#define false 0 + +typedef struct { + unsigned int SAV; + unsigned int EAV; +} SystemCodeType; + +const SystemCodeType SystemCodeMap[4] = { + {0xFF000080, 0xFF00009D}, + {0xFF0000AB, 0xFF0000B6}, + {0xFF0000C7, 0xFF0000DA}, + {0xFF0000EC, 0xFF0000F1} +}; diff --git a/examples/Makefile b/examples/Makefile index 423a79b..e9b4974 100644 --- a/examples/Makefile +++ b/examples/Makefile @@ -86,10 +86,14 @@ BIN += sched.bin endif ifeq ($(ARCH),blackfin) +ifneq ($(BOARD),bf537-stamp) +ifneq ($(BOARD),bf537-pnav) ELF += smc91111_eeprom SREC += smc91111_eeprom.srec BIN += smc91111_eeprom.bin endif +endif +endif # The following example is pretty 8xx specific... ifeq ($(CPU),mpc8xx) diff --git a/examples/stubs.c b/examples/stubs.c index ffd314e..26df6e0 100644 --- a/examples/stubs.c +++ b/examples/stubs.c @@ -132,7 +132,7 @@ gd_t *global_data; */ #define EXPORT_FUNC(x) \ asm volatile ( \ -" .globl " #x "\n" \ +" .globl _" #x "\n_" \ #x ":\n" \ " P0 = [P5 + %0]\n" \ " P0 = [P0 + %1]\n" \ diff --git a/include/asm-blackfin/arch-bf533/anomaly.h b/include/asm-blackfin/arch-bf533/anomaly.h new file mode 100644 index 0000000..4fe425c --- /dev/null +++ b/include/asm-blackfin/arch-bf533/anomaly.h @@ -0,0 +1,172 @@ +/* + * File: include/asm-blackfin/arch-bf533/anomaly.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* This file shoule be up to date with: + * - Revision U, May 17, 2006; ADSP-BF533 Blackfin Processor Anomaly List + * - Revision Y, May 17, 2006; ADSP-BF532 Blackfin Processor Anomaly List + * - Revision T, May 17, 2006; ADSP-BF531 Blackfin Processor Anomaly List + */ + +#ifndef _MACH_ANOMALY_H_ +#define _MACH_ANOMALY_H_ + +/* We do not support 0.1 or 0.2 silicon - sorry */ +#if (defined(CONFIG_BF_REV_0_1) || defined(CONFIG_BF_REV_0_2)) +#error Kernel will not work on BF533 Version 0.1 or 0.2 +#endif + +/* Issues that are common to 0.5, 0.4, and 0.3 silicon */ +#if (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_4) || defined(CONFIG_BF_REV_0_3)) +#define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in + slot1 and store of a P register in slot 2 is not + supported */ +#define ANOMALY_05000105 /* Watchpoint Status Register (WPSTAT) bits are set on + every corresponding match */ +#define ANOMALY_05000119 /* DMA_RUN bit is not valid after a Peripheral Receive + Channel DMA stops */ +#define ANOMALY_05000122 /* Rx.H can not be used to access 16-bit System MMR + registers. */ +#define ANOMALY_05000166 /* PPI Data Lengths Between 8 and 16 do not zero out + upper bits*/ +#define ANOMALY_05000167 /* Turning Serial Ports on With External Frame Syncs */ +#define ANOMALY_05000180 /* PPI_DELAY not functional in PPI modes with 0 frame + syncs */ +#define ANOMALY_05000208 /* VSTAT status bit in PLL_STAT register is not + functional */ +#define ANOMALY_05000219 /* NMI event at boot time results in unpredictable + state */ +#define ANOMALY_05000229 /* SPI Slave Boot Mode modifies registers */ +#define ANOMALY_05000272 /* Certain data cache write through modes fail for + VDDint <=0.9V */ +#define ANOMALY_05000273 /* Writes to Synchronous SDRAM memory may be lost */ +#define ANOMALY_05000277 /* Writes to a flag data register one SCLK cycle after + an edge is detected may clear interrupt */ +#define ANOMALY_05000278 /* Disabling Peripherals with DMA running may cause + DMA system instability */ +#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is + not restored */ +#define ANOMALY_05000282 /* Memory DMA corruption with 32-bit data and traffic + control */ +#define ANOMALY_05000283 /* A system MMR write is stalled indefinitely when + killed in a particular stage*/ +#endif + +/* These issues only occur on 0.3 or 0.4 BF533 */ +#if (defined(CONFIG_BF_REV_0_4) || defined(CONFIG_BF_REV_0_3)) +#define ANOMALY_05000099 /* UART Line Status Register (UART_LSR) bits are not + updated at the same time. */ +#define ANOMALY_05000158 /* Boot fails when data cache enabled: Data from a Data + Cache Fill can be corrupted after or during + Instruction DMA if certain core stalls exist */ +#define ANOMALY_05000179 /* PPI_COUNT cannot be programmed to 0 in General + Purpose TX or RX modes */ +#define ANOMALY_05000198 /* Failing SYSTEM MMR accesses when stalled by + preceding memory read */ +#define ANOMALY_05000200 /* SPORT TFS and DT are incorrectly driven during + inactive channels in certain conditions */ +#define ANOMALY_05000202 /* Possible infinite stall with specific dual dag + situation */ +#define ANOMALY_05000215 /* UART TX Interrupt masked erroneously */ +#define ANOMALY_05000225 /* Incorrect pulse-width of UART start-bit */ +#define ANOMALY_05000227 /* Scratchpad memory bank reads may return incorrect + data*/ +#define ANOMALY_05000230 /* UART Receiver is less robust against Baudrate + Differences in certain Conditions */ +#define ANOMALY_05000231 /* UART STB bit incorrectly affects receiver setting */ +#define ANOMALY_05000242 /* DF bit in PLL_CTL register does not respond to + hardware reset */ +#define ANOMALY_05000244 /* With instruction cache enabled, a CSYNC or SSYNC or + IDLE around a Change of Control causes + unpredictable results */ +#define ANOMALY_05000245 /* Spurious Hardware Error from an access in the + shadow of a conditional branch */ +#define ANOMALY_05000246 /* Data CPLB's should prevent spurious hardware + errors */ +#define ANOMALY_05000253 /* Maximum external clock speed for Timers */ +#define ANOMALY_05000255 /* Entering Hibernate Mode with RTC Seconds event + interrupt not functional */ +#define ANOMALY_05000257 /* An interrupt or exception during short Hardware + loops may cause the instruction fetch unit to + malfunction */ +#define ANOMALY_05000258 /* Instruction Cache is corrupted when bit 9 and 12 of + the ICPLB Data registers differ */ +#define ANOMALY_05000260 /* ICPLB_STATUS MMR register may be corrupted */ +#define ANOMALY_05000261 /* DCPLB_FAULT_ADDR MMR register may be corrupted */ +#define ANOMALY_05000262 /* Stores to data cache may be lost */ +#define ANOMALY_05000263 /* Hardware loop corrupted when taking an ICPLB exception */ +#define ANOMALY_05000264 /* A Sync instruction (CSYNC, SSYNC) or an IDLE + instruction will cause an infinite stall in the + second to last instruction in a hardware loop */ +#define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on + SPORT external receive and transmit clocks. */ +#define ANOMALY_05000269 /* High I/O activity causes the output voltage of the + internal voltage regulator (VDDint) to increase. */ +#define ANOMALY_05000270 /* High I/O activity causes the output voltage of the + internal voltage regulator (VDDint) to decrease */ +#endif + +/* These issues are only on 0.4 silicon */ +#if (defined(CONFIG_BF_REV_0_4)) +#define ANOMALY_05000234 /* Incorrect Revision Number in DSPID Register */ +#define ANOMALY_05000250 /* Incorrect Bit-Shift of Data Word in Multichannel + (TDM) */ +#endif + +/* These issues are only on 0.3 silicon */ +#if defined(CONFIG_BF_REV_0_3) +#define ANOMALY_05000183 /* Timer Pin limitations for PPI TX Modes with + External Frame Syncs */ +#define ANOMALY_05000189 /* False Protection Exceptions caused by Speculative + Instruction or Data Fetches, or by Fetches at the + boundary of reserved memory space */ +#define ANOMALY_05000193 /* False Flag Pin Interrupts on Edge Sensitive Inputs + when polarity setting is changed */ +#define ANOMALY_05000194 /* Sport Restarting in specific modes may cause data + corruption */ +#define ANOMALY_05000199 /* DMA current address shows wrong value during carry + fix */ +#define ANOMALY_05000201 /* Receive frame sync not ignored during active + frames in sport MCM */ +#define ANOMALY_05000203 /* Specific sequence that can cause DMA error or DMA + stopping */ +#if defined(CONFIG_BF533) +#define ANOMALY_05000204 /* Incorrect data read with write-through cache and + allocate cache lines on reads only mode */ +#endif /* CONFIG_BF533 */ +#define ANOMALY_05000207 /* Recovery from "brown-out" condition */ +#define ANOMALY_05000209 /* Speed-Path in computational unit affects certain + instructions */ +#define ANOMALY_05000233 /* PPI_FS3 is not driven in 2 or 3 internal Frame + Sync Transmit Mode */ +#define ANOMALY_05000271 /* Spontaneous reset of Internal Voltage Regulator */ +#endif + +#endif /* _MACH_ANOMALY_H_ */ diff --git a/include/asm-blackfin/cpu/bf533_serial.h b/include/asm-blackfin/arch-bf533/bf533_serial.h index d5e162a..ce58863 100644 --- a/include/asm-blackfin/cpu/bf533_serial.h +++ b/include/asm-blackfin/arch-bf533/bf533_serial.h @@ -22,7 +22,6 @@ * MA 02111-1307 USA */ - #ifndef _BF533_SERIAL_H_ #define _BF533_SERIAL_H_ diff --git a/include/asm-blackfin/cpu/bf533_rtc.h b/include/asm-blackfin/arch-bf533/bf5xx_rtc.h index bc09922..bc09922 100644 --- a/include/asm-blackfin/cpu/bf533_rtc.h +++ b/include/asm-blackfin/arch-bf533/bf5xx_rtc.h diff --git a/include/asm-blackfin/cpu/cdefBF531.h b/include/asm-blackfin/arch-bf533/cdefBF531.h index 68d841d..3877db8 100644 --- a/include/asm-blackfin/cpu/cdefBF531.h +++ b/include/asm-blackfin/arch-bf533/cdefBF531.h @@ -19,6 +19,6 @@ #ifndef _CDEFBF531_H #define _CDEFBF531_H -#include <cdefBF532.h> +#include <asm/arch-bf533/cdefBF532.h> #endif /* _CDEFBF531_H */ diff --git a/include/asm-blackfin/cpu/cdefBF532.h b/include/asm-blackfin/arch-bf533/cdefBF532.h index a4d422f..bca1ed1 100644 --- a/include/asm-blackfin/cpu/cdefBF532.h +++ b/include/asm-blackfin/arch-bf533/cdefBF532.h @@ -26,10 +26,10 @@ */ /* include all Core registers and bit definitions */ -#include <asm/cpu/defBF532.h> +#include <asm/arch-bf533/defBF532.h> /* include core specific register pointer definitions */ -#include <asm/cpu/cdef_LPBlackfin.h> +#include <asm/arch-common/cdef_LPBlackfin.h> /* Clock and System Control (0xFFC0 0400-0xFFC0 07FF) */ #define pPLL_CTL ((volatile unsigned short *)PLL_CTL) diff --git a/include/asm-blackfin/cpu/cdefBF533.h b/include/asm-blackfin/arch-bf533/cdefBF533.h index 8c751e6..c72bac9 100644 --- a/include/asm-blackfin/cpu/cdefBF533.h +++ b/include/asm-blackfin/arch-bf533/cdefBF533.h @@ -19,6 +19,6 @@ #ifndef _CDEFBF533_H #define _CDEFBF533_H -#include <asm/cpu/cdefBF532.h> +#include <asm/arch-bf533/cdefBF532.h> #endif /* _CDEFBF533_H */ diff --git a/include/asm-blackfin/arch-bf533/cplbtab.h b/include/asm-blackfin/arch-bf533/cplbtab.h new file mode 100644 index 0000000..89f0325 --- /dev/null +++ b/include/asm-blackfin/arch-bf533/cplbtab.h @@ -0,0 +1,482 @@ +/*This file is subject to the terms and conditions of the GNU General Public + * License. + * + * Blackfin BF533/2.6 support : LG Soft India + * Updated : Ashutosh Singh / Jahid Khan : Rrap Software Pvt Ltd + * Updated : 1. SDRAM_KERNEL, SDRAM_DKENEL are added as initial cplb's + * shouldn't be victimized. cplbmgr.S search logic is corrected + * to findout the appropriate victim. + * 2. SDRAM_IGENERIC in dpdt_table is replaced with SDRAM_DGENERIC + * : LG Soft India + */ +#include <config.h> + +#ifndef __ARCH_BFINNOMMU_CPLBTAB_H +#define __ARCH_BFINNOMMU_CPLBTAB_H + +/************************************************************************* + * ICPLB TABLE + *************************************************************************/ + +.data +/* This table is configurable */ + .align 4; + +/* Data Attibutes*/ + +#define SDRAM_IGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID) +#define SDRAM_IKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) +#define L1_IMEMORY (PAGE_SIZE_1MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) +#define SDRAM_INON_CHBL (PAGE_SIZE_4MB | CPLB_USER_RD | CPLB_VALID) + +/*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/ + +#define ANOMALY_05000158 0x200 +#ifdef CONFIG_BLKFIN_WB /*Write Back Policy */ +#define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) +#define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) +#define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_USER_WR | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158) +#define L1_DMEMORY (PAGE_SIZE_4KB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) +#define SDRAM_EBIU (PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158) + +#else /*Write Through */ +#define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) +#define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) +#define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158) +#define L1_DMEMORY (PAGE_SIZE_4KB | CPLB_L1_CHBL | CPLB_L1_AOW | CPLB_WT | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) +#define SDRAM_EBIU (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158) +#endif + +.align 4; +.global _ipdt_table _ipdt_table:.byte4 0x00000000; +.byte4(SDRAM_IKERNEL); /*SDRAM_Page0 */ +.byte4 0x00400000; +.byte4(SDRAM_IKERNEL); /*SDRAM_Page1 */ +.byte4 0x00800000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page2 */ +.byte4 0x00C00000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page3 */ +.byte4 0x01000000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page4 */ +.byte4 0x01400000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page5 */ +.byte4 0x01800000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page6 */ +.byte4 0x01C00000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page7 */ +#ifndef CONFIG_EZKIT /*STAMP Memory regions */ +.byte4 0x02000000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page8 */ +.byte4 0x02400000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page9 */ +.byte4 0x02800000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page10 */ +.byte4 0x02C00000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page11 */ +.byte4 0x03000000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page12 */ +.byte4 0x03400000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page13 */ +.byte4 0x03800000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page14 */ +.byte4 0x03C00000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page15 */ +#endif +.byte4 0x20000000; +.byte4(SDRAM_EBIU); /* Async Memory Bank 2 (Secnd) */ + +#ifdef CONFIG_STAMP +.byte4 0x04000000; +.byte4(SDRAM_IGENERIC); +.byte4 0x04400000; +.byte4(SDRAM_IGENERIC); +.byte4 0x04800000; +.byte4(SDRAM_IGENERIC); +.byte4 0x04C00000; +.byte4(SDRAM_IGENERIC); +.byte4 0x05000000; +.byte4(SDRAM_IGENERIC); +.byte4 0x05400000; +.byte4(SDRAM_IGENERIC); +.byte4 0x05800000; +.byte4(SDRAM_IGENERIC); +.byte4 0x05C00000; +.byte4(SDRAM_IGENERIC); +.byte4 0x06000000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page25 */ +.byte4 0x06400000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page26 */ +.byte4 0x06800000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page27 */ +.byte4 0x06C00000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page28 */ +.byte4 0x07000000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page29 */ +.byte4 0x07400000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page30 */ +.byte4 0x07800000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page31 */ +.byte4 0x07C00000; +.byte4(SDRAM_IKERNEL); /*SDRAM_Page32 */ +#endif +.byte4 0xffffffff; /* end of section - termination */ + +/********************************************************************** + * PAGE DESCRIPTOR TABLE + * + **********************************************************************/ + +/* Till here we are discussing about the static memory management model. + * However, the operating envoronments commonly define more CPLB + * descriptors to cover the entire addressable memory than will fit into + * the available on-chip 16 CPLB MMRs. When this happens, the below table + * will be used which will hold all the potentially required CPLB descriptors + * + * This is how Page descriptor Table is implemented in uClinux/Blackfin. + */ +.global _dpdt_table _dpdt_table:.byte4 0x00000000; +.byte4(SDRAM_DKERNEL); /*SDRAM_Page0 */ +.byte4 0x00400000; +.byte4(SDRAM_DKERNEL); /*SDRAM_Page1 */ +.byte4 0x00800000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page2 */ +.byte4 0x00C00000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page3 */ +.byte4 0x01000000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page4 */ +.byte4 0x01400000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page5 */ +.byte4 0x01800000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page6 */ +.byte4 0x01C00000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page7 */ + +#ifndef CONFIG_EZKIT +.byte4 0x02000000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page8 */ +.byte4 0x02400000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page9 */ +.byte4 0x02800000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page10 */ +.byte4 0x02C00000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page11 */ +.byte4 0x03000000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page12 */ +.byte4 0x03400000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page13 */ +.byte4 0x03800000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page14 */ +.byte4 0x03C00000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page15 */ +#endif + +#ifdef CONFIG_STAMP +.byte4 0x04000000; +.byte4(SDRAM_DGENERIC); +.byte4 0x04400000; +.byte4(SDRAM_DGENERIC); +.byte4 0x04800000; +.byte4(SDRAM_DGENERIC); +.byte4 0x04C00000; +.byte4(SDRAM_DGENERIC); +.byte4 0x05000000; +.byte4(SDRAM_DGENERIC); +.byte4 0x05400000; +.byte4(SDRAM_DGENERIC); +.byte4 0x05800000; +.byte4(SDRAM_DGENERIC); +.byte4 0x05C00000; +.byte4(SDRAM_DGENERIC); +.byte4 0x06000000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page25 */ +.byte4 0x06400000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page26 */ +.byte4 0x06800000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page27 */ +.byte4 0x06C00000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page28 */ +.byte4 0x07000000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page29 */ +.byte4 0x07400000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page30 */ +.byte4 0x07800000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page31 */ +.byte4 0x07C00000; +.byte4(SDRAM_DKERNEL); /*SDRAM_Page32 */ +#endif + +.byte4 0x20000000; +.byte4(SDRAM_EBIU); /* Async Memory Bank 0 (Prim A) */ + +#if (BFIN_CPU == ADSP_BF533) +.byte4 0xFF800000; +.byte4(L1_DMEMORY); +.byte4 0xFF801000; +.byte4(L1_DMEMORY); +.byte4 0xFF802000; +.byte4(L1_DMEMORY); +.byte4 0xFF803000; +.byte4(L1_DMEMORY); +#endif +.byte4 0xFF804000; +.byte4(L1_DMEMORY); +.byte4 0xFF805000; +.byte4(L1_DMEMORY); +.byte4 0xFF806000; +.byte4(L1_DMEMORY); +.byte4 0xFF807000; +.byte4(L1_DMEMORY); +#if (BFIN_CPU == ADSP_BF533) +.byte4 0xFF900000; +.byte4(L1_DMEMORY); +.byte4 0xFF901000; +.byte4(L1_DMEMORY); +.byte4 0xFF902000; +.byte4(L1_DMEMORY); +.byte4 0xFF903000; +.byte4(L1_DMEMORY); +#endif +#if ((BFIN_CPU == ADSP_BF532) || (BFIN_CPU == ADSP_BF533)) +.byte4 0xFF904000; +.byte4(L1_DMEMORY); +.byte4 0xFF905000; +.byte4(L1_DMEMORY); +.byte4 0xFF906000; +.byte4(L1_DMEMORY); +.byte4 0xFF907000; +.byte4(L1_DMEMORY); +#endif +.byte4 0xFFB00000; +.byte4(L1_DMEMORY); + +.byte4 0xffffffff; /*end of section - termination */ + +#ifdef CONFIG_CPLB_INFO +.global _ipdt_swapcount_table; /* swapin count first, then swapout count */ +_ipdt_swapcount_table: +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 10 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 20 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 30 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 40 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 50 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 60 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 70 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 80 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 90 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 100 */ + +.global _dpdt_swapcount_table; /* swapin count first, then swapout count */ +_dpdt_swapcount_table: +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 10 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 20 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 30 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 40 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 50 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 60 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 70 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 80 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 80 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 100 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 110 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 120 */ +#endif + +#endif /*__ARCH_BFINNOMMU_CPLBTAB_H*/ diff --git a/include/asm-blackfin/cpu/defBF531.h b/include/asm-blackfin/arch-bf533/defBF531.h index 6c7cd5a..6c7cd5a 100644 --- a/include/asm-blackfin/cpu/defBF531.h +++ b/include/asm-blackfin/arch-bf533/defBF531.h diff --git a/include/asm-blackfin/cpu/defBF532.h b/include/asm-blackfin/arch-bf533/defBF532.h index 26a5fe6..25a74e6 100644 --- a/include/asm-blackfin/cpu/defBF532.h +++ b/include/asm-blackfin/arch-bf533/defBF532.h @@ -28,7 +28,7 @@ */ /* include all Core registers and bit definitions */ -#include <asm/cpu/def_LPBlackfin.h> +#include <asm/arch-common/def_LPBlackfin.h> /* Helper macros * usage: @@ -51,7 +51,7 @@ #define VR_CTL 0xFFC00008 /* Voltage Regulator Control Register (16-bit) */ #define PLL_STAT 0xFFC0000C /* PLL Status register (16-bit) */ #define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count register (16-bit) */ -#define CHIPID 0xFFC00014 /* Chip ID register (32-bit) */ +#define CHIPID 0xFFC00014 /* Chip ID register (32-bit) */ #define SWRST 0xFFC00100 /* Software Reset Register (16-bit) */ #define SYSCR 0xFFC00104 /* System Configuration register */ @@ -88,7 +88,7 @@ #define UART_LCR 0xFFC0040C /* Line Control Register */ #define UART_MCR 0xFFC00410 /* Modem Control Register */ #define UART_LSR 0xFFC00414 /* Line Status Register */ -/* #define UART_MSR 0xFFC00418 */ /* Modem Status Register (UNUSED in ADSP-BF532) */ +/* #define UART_MSR 0xFFC00418 */ /* Modem Status Register (UNUSED in ADSP-BF532) */ #define UART_SCR 0xFFC0041C /* SCR Scratch Register */ #define UART_GCTL 0xFFC00424 /* Global Control Register */ @@ -405,7 +405,7 @@ #define BYPASS 0x00000100 /* Bypass the PLL */ /* PLL_DIV Masks */ -#define SCLK_DIV(x) (x) /* SCLK = VCO / x */ +#define SCLK_DIV(x) (x) /* SCLK = VCO / x */ #define CCLK_DIV1 0x00000000 /* CCLK = VCO / 1 */ #define CCLK_DIV2 0x00000010 /* CCLK = VCO / 2 */ @@ -420,7 +420,7 @@ */ /* SIC_IAR0 Masks */ -#define P0_IVG(x) ((x)-7) /* Peripheral #0 assigned IVG #x */ +#define P0_IVG(x) ((x)-7) /* Peripheral #0 assigned IVG #x */ #define P1_IVG(x) ((x)-7) << 0x4 /* Peripheral #1 assigned IVG #x */ #define P2_IVG(x) ((x)-7) << 0x8 /* Peripheral #2 assigned IVG #x */ #define P3_IVG(x) ((x)-7) << 0xC /* Peripheral #3 assigned IVG #x */ @@ -430,7 +430,7 @@ #define P7_IVG(x) ((x)-7) << 0x1C /* Peripheral #7 assigned IVG #x */ /* SIC_IAR1 Masks */ -#define P8_IVG(x) ((x)-7) /* Peripheral #8 assigned IVG #x */ +#define P8_IVG(x) ((x)-7) /* Peripheral #8 assigned IVG #x */ #define P9_IVG(x) ((x)-7) << 0x4 /* Peripheral #9 assigned IVG #x */ #define P10_IVG(x) ((x)-7) << 0x8 /* Peripheral #10 assigned IVG #x */ #define P11_IVG(x) ((x)-7) << 0xC /* Peripheral #11 assigned IVG #x */ @@ -440,7 +440,7 @@ #define P15_IVG(x) ((x)-7) << 0x1C /* Peripheral #15 assigned IVG #x */ /* SIC_IAR2 Masks */ -#define P16_IVG(x) ((x)-7) /* Peripheral #16 assigned IVG #x */ +#define P16_IVG(x) ((x)-7) /* Peripheral #16 assigned IVG #x */ #define P17_IVG(x) ((x)-7) << 0x4 /* Peripheral #17 assigned IVG #x */ #define P18_IVG(x) ((x)-7) << 0x8 /* Peripheral #18 assigned IVG #x */ #define P19_IVG(x) ((x)-7) << 0xC /* Peripheral #19 assigned IVG #x */ @@ -486,25 +486,25 @@ #define RTDAY 0xFFFE0000 /* Real-Time Clock Days */ /* RTC_ICTL register */ -#define SWIE 0x0001 /* Stopwatch Interrupt Enable */ -#define AIE 0x0002 /* Alarm Interrupt Enable */ -#define SIE 0x0004 /* Seconds (1 Hz) Interrupt Enable */ -#define MIE 0x0008 /* Minutes Interrupt Enable */ -#define HIE 0x0010 /* Hours Interrupt Enable */ -#define DIE 0x0020 /* 24 Hours (Days) Interrupt Enable */ -#define DAIE 0x0040 /* Day Alarm (Day, Hour, Minute, Second) Interrupt Enable */ -#define WCIE 0x8000 /* Write Complete Interrupt Enable */ +#define SWIE 0x0001 /* Stopwatch Interrupt Enable */ +#define AIE 0x0002 /* Alarm Interrupt Enable */ +#define SIE 0x0004 /* Seconds (1 Hz) Interrupt Enable */ +#define MIE 0x0008 /* Minutes Interrupt Enable */ +#define HIE 0x0010 /* Hours Interrupt Enable */ +#define DIE 0x0020 /* 24 Hours (Days) Interrupt Enable */ +#define DAIE 0x0040 /* Day Alarm (Day, Hour, Minute, Second) Interrupt Enable */ +#define WCIE 0x8000 /* Write Complete Interrupt Enable */ /* RTC_ISTAT register */ -#define SWEF 0x0001 /* Stopwatch Event Flag */ -#define AEF 0x0002 /* Alarm Event Flag */ -#define SEF 0x0004 /* Seconds (1 Hz) Event Flag */ -#define MEF 0x0008 /* Minutes Event Flag */ -#define HEF 0x0010 /* Hours Event Flag */ -#define DEF 0x0020 /* 24 Hours (Days) Event Flag */ -#define DAEF 0x0040 /* Day Alarm (Day, Hour, Minute, Second) Event Flag */ -#define WPS 0x4000 /* Write Pending Status (RO) */ -#define WCOM 0x8000 /* Write Complete */ +#define SWEF 0x0001 /* Stopwatch Event Flag */ +#define AEF 0x0002 /* Alarm Event Flag */ +#define SEF 0x0004 /* Seconds (1 Hz) Event Flag */ +#define MEF 0x0008 /* Minutes Event Flag */ +#define HEF 0x0010 /* Hours Event Flag */ +#define DEF 0x0020 /* 24 Hours (Days) Event Flag */ +#define DAEF 0x0040 /* Day Alarm (Day, Hour, Minute, Second) Event Flag */ +#define WPS 0x4000 /* Write Pending Status (RO) */ +#define WCOM 0x8000 /* Write Complete */ /* RTC_FAST Mask (RTC_PREN Mask) */ #define ENABLE_PRESCALE 0x00000001 /* Enable prescaler so RTC runs at 1 Hz */ @@ -588,50 +588,50 @@ * SERIAL PORT MASKS */ /* SPORTx_TCR1 Masks */ -#define TSPEN 0x0001 /* TX enable */ -#define ITCLK 0x0002 /* Internal TX Clock Select */ -#define TDTYPE 0x000C /* TX Data Formatting Select */ -#define TLSBIT 0x0010 /* TX Bit Order */ -#define ITFS 0x0200 /* Internal TX Frame Sync Select */ -#define TFSR 0x0400 /* TX Frame Sync Required Select */ -#define DITFS 0x0800 /* Data Independent TX Frame Sync Select */ -#define LTFS 0x1000 /* Low TX Frame Sync Select */ -#define LATFS 0x2000 /* Late TX Frame Sync Select */ -#define TCKFE 0x4000 /* TX Clock Falling Edge Select */ +#define TSPEN 0x0001 /* TX enable */ +#define ITCLK 0x0002 /* Internal TX Clock Select */ +#define TDTYPE 0x000C /* TX Data Formatting Select */ +#define TLSBIT 0x0010 /* TX Bit Order */ +#define ITFS 0x0200 /* Internal TX Frame Sync Select */ +#define TFSR 0x0400 /* TX Frame Sync Required Select */ +#define DITFS 0x0800 /* Data Independent TX Frame Sync Select */ +#define LTFS 0x1000 /* Low TX Frame Sync Select */ +#define LATFS 0x2000 /* Late TX Frame Sync Select */ +#define TCKFE 0x4000 /* TX Clock Falling Edge Select */ /* SPORTx_TCR2 Masks */ -#define SLEN 0x001F /*TX Word Length */ -#define TXSE 0x0100 /*TX Secondary Enable */ -#define TSFSE 0x0200 /*TX Stereo Frame Sync Enable */ -#define TRFST 0x0400 /*TX Right-First Data Order */ +#define SLEN 0x001F /*TX Word Length */ +#define TXSE 0x0100 /*TX Secondary Enable */ +#define TSFSE 0x0200 /*TX Stereo Frame Sync Enable */ +#define TRFST 0x0400 /*TX Right-First Data Order */ /* SPORTx_RCR1 Masks */ -#define RSPEN 0x0001 /* RX enable */ -#define IRCLK 0x0002 /* Internal RX Clock Select */ -#define RDTYPE 0x000C /* RX Data Formatting Select */ -#define RULAW 0x0008 /* u-Law enable */ -#define RALAW 0x000C /* A-Law enable */ -#define RLSBIT 0x0010 /* RX Bit Order */ -#define IRFS 0x0200 /* Internal RX Frame Sync Select */ -#define RFSR 0x0400 /* RX Frame Sync Required Select */ -#define LRFS 0x1000 /* Low RX Frame Sync Select */ -#define LARFS 0x2000 /* Late RX Frame Sync Select */ -#define RCKFE 0x4000 /* RX Clock Falling Edge Select */ +#define RSPEN 0x0001 /* RX enable */ +#define IRCLK 0x0002 /* Internal RX Clock Select */ +#define RDTYPE 0x000C /* RX Data Formatting Select */ +#define RULAW 0x0008 /* u-Law enable */ +#define RALAW 0x000C /* A-Law enable */ +#define RLSBIT 0x0010 /* RX Bit Order */ +#define IRFS 0x0200 /* Internal RX Frame Sync Select */ +#define RFSR 0x0400 /* RX Frame Sync Required Select */ +#define LRFS 0x1000 /* Low RX Frame Sync Select */ +#define LARFS 0x2000 /* Late RX Frame Sync Select */ +#define RCKFE 0x4000 /* RX Clock Falling Edge Select */ /* SPORTx_RCR2 Masks */ -#define SLEN 0x001F /* RX Word Length */ -#define RXSE 0x0100 /* RX Secondary Enable */ -#define RSFSE 0x0200 /* RX Stereo Frame Sync Enable */ -#define RRFST 0x0400 /* Right-First Data Order */ +#define SLEN 0x001F /* RX Word Length */ +#define RXSE 0x0100 /* RX Secondary Enable */ +#define RSFSE 0x0200 /* RX Stereo Frame Sync Enable */ +#define RRFST 0x0400 /* Right-First Data Order */ /* SPORTx_STAT Masks */ -#define RXNE 0x0001 /* RX FIFO Not Empty Status */ -#define RUVF 0x0002 /* RX Underflow Status */ -#define ROVF 0x0004 /* RX Overflow Status */ -#define TXF 0x0008 /* TX FIFO Full Status */ -#define TUVF 0x0010 /* TX Underflow Status */ -#define TOVF 0x0020 /* TX Overflow Status */ -#define TXHRE 0x0040 /* TX Hold Register Empty */ +#define RXNE 0x0001 /* RX FIFO Not Empty Status */ +#define RUVF 0x0002 /* RX Underflow Status */ +#define ROVF 0x0004 /* RX Overflow Status */ +#define TXF 0x0008 /* TX FIFO Full Status */ +#define TUVF 0x0010 /* TX Underflow Status */ +#define TOVF 0x0020 /* TX Overflow Status */ +#define TXHRE 0x0040 /* TX Hold Register Empty */ /* SPORTx_MCMC1 Masks */ #define WSIZE 0x0000F000 /* Multichannel Window Size Field */ @@ -660,7 +660,7 @@ #define SKIP_EN 0x00000200 /* PPI Skip Element Enable */ #define SKIP_EO 0x00000400 /* PPI Skip Even/Odd Elements */ #define DLENGTH 0x00003800 /* PPI Data Length */ -#define DLEN_8 0x0 /* PPI Data Length mask for DLEN=8 */ +#define DLEN_8 0x0 /* PPI Data Length mask for DLEN=8 */ #define DLEN(x) (((x-9) & 0x07) << 11) /* PPI Data Length (only works for x=10-->x=16) */ #define POL 0x0000C000 /* PPI Signal Polarities */ @@ -689,12 +689,12 @@ #define NDSIZE 0x00000900 /* Next Descriptor Size */ #define FLOW 0x00007000 /* Flow Control */ -#define DMAEN_P 0 /* Channel Enable */ -#define WNR_P 1 /* Channel Direction (W/R*) */ -#define DMA2D_P 4 /* 2D/1D* Mode */ -#define RESTART_P 5 /* Restart */ -#define DI_SEL_P 6 /* Data Interrupt Select */ -#define DI_EN_P 7 /* Data Interrupt Enable */ +#define DMAEN_P 0 /* Channel Enable */ +#define WNR_P 1 /* Channel Direction (W/R*) */ +#define DMA2D_P 4 /* 2D/1D* Mode */ +#define RESTART_P 5 /* Restart */ +#define DI_SEL_P 6 /* Data Interrupt Select */ +#define DI_EN_P 7 /* Data Interrupt Enable */ /* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */ #define DMA_DONE 0x00000001 /* DMA Done Indicator */ @@ -702,14 +702,14 @@ #define DFETCH 0x00000004 /* Descriptor Fetch Indicator */ #define DMA_RUN 0x00000008 /* DMA Running Indicator */ -#define DMA_DONE_P 0 /* DMA Done Indicator */ -#define DMA_ERR_P 1 /* DMA Error Indicator */ -#define DFETCH_P 2 /* Descriptor Fetch Indicator */ -#define DMA_RUN_P 3 /* DMA Running Indicator */ +#define DMA_DONE_P 0 /* DMA Done Indicator */ +#define DMA_ERR_P 1 /* DMA Error Indicator */ +#define DFETCH_P 2 /* Descriptor Fetch Indicator */ +#define DMA_RUN_P 3 /* DMA Running Indicator */ /* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */ #define CTYPE 0x00000040 /* DMA Channel Type Indicator */ -#define CTYPE_P 6 /* DMA Channel Type Indicator BIT POSITION */ +#define CTYPE_P 6 /* DMA Channel Type Indicator BIT POSITION */ #define PCAP8 0x00000080 /* DMA 8-bit Operation Indicator */ #define PCAP16 0x00000100 /* DMA 16-bit Operation Indicator */ #define PCAP32 0x00000200 /* DMA 32-bit Operation Indicator */ @@ -1156,4 +1156,4 @@ #define SDEASE 0x00000010 /* SDRAM EAB sticky error status - W1C */ #define BGSTAT 0x00000020 /* Bus granted */ -#endif /* _DEF_BF532_H */ +#endif /* _DEF_BF532_H */ diff --git a/include/asm-blackfin/cpu/defBF533.h b/include/asm-blackfin/arch-bf533/defBF533.h index 90e50af..90e50af 100644 --- a/include/asm-blackfin/cpu/defBF533.h +++ b/include/asm-blackfin/arch-bf533/defBF533.h diff --git a/include/asm-blackfin/cpu/defBF533_extn.h b/include/asm-blackfin/arch-bf533/defBF533_extn.h index a9a1c7c..045e8e4 100644 --- a/include/asm-blackfin/cpu/defBF533_extn.h +++ b/include/asm-blackfin/arch-bf533/defBF533_extn.h @@ -19,9 +19,10 @@ #ifndef _DEF_BF533_EXTN_H #define _DEF_BF533_EXTN_H -#define OFFSET_( x ) ((x) & 0x0000FFFF) /* define macro for offset */ +/* define macro for offset */ +#define OFFSET_( x ) ((x) & 0x0000FFFF) /* Delay inserted for PLL transition */ -#define DELAY 0x1000 +#define PLL_DELAY 0x1000 #define L1_ISRAM 0xFFA00000 #define L1_ISRAM_END 0xFFA10000 diff --git a/include/asm-blackfin/cpu/bf533_irq.h b/include/asm-blackfin/arch-bf533/irq.h index 9c5230d..9c5230d 100644 --- a/include/asm-blackfin/cpu/bf533_irq.h +++ b/include/asm-blackfin/arch-bf533/irq.h diff --git a/include/asm-blackfin/arch-bf537/anomaly.h b/include/asm-blackfin/arch-bf537/anomaly.h new file mode 100644 index 0000000..50b44da --- /dev/null +++ b/include/asm-blackfin/arch-bf537/anomaly.h @@ -0,0 +1,116 @@ +/* + * File: include/asm-blackfin/arch-bf537/anomaly.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* This file shoule be up to date with: + * - Revision J, June 1, 2006; ADSP-BF537 Blackfin Processor Anomaly List + * - Revision I, June 1, 2006; ADSP-BF536 Blackfin Processor Anomaly List + * - Revision J, June 1, 2006; ADSP-BF534 Blackfin Processor Anomaly List + */ + +#ifndef _MACH_ANOMALY_H_ +#define _MACH_ANOMALY_H_ + +/* We do not support 0.1 silicon - sorry */ +#if (defined(CONFIG_BF_REV_0_1)) +#error Kernel will not work on BF537/6/4 Version 0.1 +#endif + +#if (defined(CONFIG_BF_REV_0_3) || defined(CONFIG_BF_REV_0_2)) +#define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in + slot1 and store of a P register in slot 2 is not + supported */ +#define ANOMALY_05000119 /* DMA_RUN bit is not valid after a Peripheral Receive + Channel DMA stops */ +#define ANOMALY_05000122 /* Rx.H can not be used to access 16-bit System MMR + registers. */ +#define ANOMALY_05000166 /* PPI Data Lengths Between 8 and 16 do not zero out + upper bits */ +#define ANOMALY_05000180 /* PPI_DELAY not functional in PPI modes with 0 frame + syncs */ +#if (defined(CONFIG_BF537) || defined(CONFIG_BF536)) +#define ANOMALY_05000247 /* CLKIN Buffer Output Enable Reset Behavior Is + Changed */ +#endif +#define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on + SPORT external receive and transmit clocks. */ +#define ANOMALY_05000272 /* Certain data cache write through modes fail for + VDDint <=0.9V */ +#define ANOMALY_05000273 /* Writes to Synchronous SDRAM memory may be lost */ +#define ANOMALY_05000277 /* Writes to a flag data register one SCLK cycle after + an edge is detected may clear interrupt */ +#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is + not restored */ +#define ANOMALY_05000282 /* Memory DMA corruption with 32-bit data and traffic + control */ +#define ANOMALY_05000283 /* A system MMR write is stalled indefinitely when + killed in a particular stage */ +#endif + +#if defined(CONFIG_BF_REV_0_2) +#define ANOMALY_05000244 /* With instruction cache enabled, a CSYNC or SSYNC or + IDLE around a Change of Control causes + unpredictable results */ +#define ANOMALY_05000250 /* Incorrect Bit-Shift of Data Word in Multichannel + (TDM) */ +#if (defined(CONFIG_BF537) || defined(CONFIG_BF536)) +#define ANOMALY_05000252 /* EMAC Tx DMA error after an early frame abort */ +#endif +#define ANOMALY_05000253 /* Maximum external clock speed for Timers */ +#define ANOMALY_05000255 /* Entering Hibernate Mode with RTC Seconds event + interrupt not functional */ +#if (defined(CONFIG_BF537) || defined(CONFIG_BF536)) +#define ANOMALY_05000256 /* EMAC MDIO input latched on wrong MDC edge */ +#endif +#define ANOMALY_05000257 /* An interrupt or exception during short Hardware + loops may cause the instruction fetch unit to + malfunction */ +#define ANOMALY_05000258 /* Instruction Cache is corrupted when bit 9 and 12 of + the ICPLB Data registers differ */ +#define ANOMALY_05000260 /* ICPLB_STATUS MMR register may be corrupted */ +#define ANOMALY_05000261 /* DCPLB_FAULT_ADDR MMR register may be corrupted */ +#define ANOMALY_05000262 /* Stores to data cache may be lost */ +#define ANOMALY_05000263 /* Hardware loop corrupted when taking an ICPLB exception */ +#define ANOMALY_05000264 /* A Sync instruction (CSYNC, SSYNC) or an IDLE + instruction will cause an infinite stall in the + second to last instruction in a hardware loop */ +#define ANOMALY_05000268 /* Memory DMA error when peripheral DMA is running + and non-zero DEB_TRAFFIC_PERIOD value */ +#define ANOMALY_05000270 /* High I/O activity causes the output voltage of the + internal voltage regulator (VDDint) to decrease */ +#define ANOMALY_05000277 /* Writes to a flag data register one SCLK cycle after + an edge is detected may clear interrupt */ +#define ANOMALY_05000278 /* Disabling Peripherals with DMA running may cause + DMA system instability */ +#define ANOMALY_05000280 /* SPI Master boot mode does not work well with + Atmel Dataflash devices */ + +#endif /* CONFIG_BF_REV_0_2 */ + +#endif /* _MACH_ANOMALY_H_ */ diff --git a/include/asm-blackfin/arch-bf537/bf537_serial.h b/include/asm-blackfin/arch-bf537/bf537_serial.h new file mode 100644 index 0000000..1610411 --- /dev/null +++ b/include/asm-blackfin/arch-bf537/bf537_serial.h @@ -0,0 +1,78 @@ +/* + * U-boot bf537_serial.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _BF537_SERIAL_H_ +#define _BF537_SERIAL_H_ + +#define BYTE_REF(addr) (*((volatile char*)addr)) +#define HALFWORD_REF(addr) (*((volatile short*)addr)) +#define WORD_REF(addr) (*((volatile long*)addr)) + +#define UART_THR_LO HALFWORD_REF(UART_THR) +#define UART_RBR_LO HALFWORD_REF(UART_RBR) +#define UART_DLL_LO HALFWORD_REF(UART_DLL) +#define UART_IER_LO HALFWORD_REF(UART_IER) +#define UART_IER_ERBFI 0x01 +#define UART_IER_ETBEI 0x02 +#define UART_IER_ELSI 0x04 +#define UART_IER_EDDSI 0x08 + +#define UART_DLH_LO HALFWORD_REF(UART_DLH) +#define UART_IIR_LO HALFWORD_REF(UART_IIR) +#define UART_IIR_NOINT 0x01 +#define UART_IIR_STATUS 0x06 +#define UART_IIR_LSR 0x06 +#define UART_IIR_RBR 0x04 +#define UART_IIR_THR 0x02 +#define UART_IIR_MSR 0x00 + +#define UART_LCR_LO HALFWORD_REF(UART_LCR) +#define UART_LCR_WLS5 0 +#define UART_LCR_WLS6 0x01 +#define UART_LCR_WLS7 0x02 +#define UART_LCR_WLS8 0x03 +#define UART_LCR_STB 0x04 +#define UART_LCR_PEN 0x08 +#define UART_LCR_EPS 0x10 +#define UART_LCR_SP 0x20 +#define UART_LCR_SB 0x40 +#define UART_LCR_DLAB 0x80 + +#define UART_MCR_LO HALFWORD_REF(UART_MCR) + +#define UART_LSR_LO HALFWORD_REF(UART_LSR) +#define UART_LSR_DR 0x01 +#define UART_LSR_OE 0x02 +#define UART_LSR_PE 0x04 +#define UART_LSR_FE 0x08 +#define UART_LSR_BI 0x10 +#define UART_LSR_THRE 0x20 +#define UART_LSR_TEMT 0x40 + +#define UART_MSR_LO HALFWORD_REF(UART_MSR) +#define UART_SCR_LO HALFWORD_REF(UART_SCR) +#define UART_GCTL_LO HALFWORD_REF(UART_GCTL) +#define UART_GCTL_UCEN 0x01 + +#endif diff --git a/include/asm-blackfin/arch-bf537/bf5xx_rtc.h b/include/asm-blackfin/arch-bf537/bf5xx_rtc.h new file mode 100644 index 0000000..0043e42 --- /dev/null +++ b/include/asm-blackfin/arch-bf537/bf5xx_rtc.h @@ -0,0 +1,46 @@ +/* + * U-boot - bf537_rtc.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _BF537_RTC_H_ +#define _BF537_RTC_H_ + +void rtc_init(void); +void wait_for_complete(void); +void rtc_reset(void); + +#define MIN_TO_SECS(_x_) (60 * _x_) +#define HRS_TO_SECS(_x_) (60 * 60 * _x_) +#define DAYS_TO_SECS(_x_) (24 * 60 * 60 * _x_) + +#define NUM_SECS_IN_DAY (24 * 3600) +#define NUM_SECS_IN_HOUR (3600) +#define NUM_SECS_IN_MIN (60) + +/* Shift values for RTC_STAT register */ +#define DAY_BITS_OFF 17 +#define HOUR_BITS_OFF 12 +#define MIN_BITS_OFF 6 +#define SEC_BITS_OFF 0 + +#endif diff --git a/include/asm-blackfin/arch-bf537/cdefBF534.h b/include/asm-blackfin/arch-bf537/cdefBF534.h new file mode 100644 index 0000000..5a89e92 --- /dev/null +++ b/include/asm-blackfin/arch-bf537/cdefBF534.h @@ -0,0 +1,1009 @@ +/* + * Copyright (C) 2005 Analog Devices Inc., All Rights Reserved. + * + *********************************************************************************** + * + * This include file contains a list of macro "defines" to enable the programmer + * to use symbolic names for register-access. + * + * ---------------------------- + * revision 0.1 + * date: 2005/01/27 14:31:01; author: joeb + * Initial revision + */ + +/* + * System MMR Register Map + */ + +#ifndef _CDEF_BF534_H +#define _CDEF_BF534_H + +/* Include all Core registers and bit definitions */ +#include <asm/arch-bf537/defBF534.h> + +/* Include core specific register pointer definitions */ +#include <asm/arch-common/cdef_LPBlackfin.h> + +#define pCHIPID ((volatile unsigned long *)CHIPID) + +/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */ +#define pPLL_CTL ((volatile unsigned short *)PLL_CTL) +#define pPLL_DIV ((volatile unsigned short *)PLL_DIV) +#define pVR_CTL ((volatile unsigned short *)VR_CTL) +#define pPLL_STAT ((volatile unsigned short *)PLL_STAT) +#define pPLL_LOCKCNT ((volatile unsigned short *)PLL_LOCKCNT) + +/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */ +#define pSWRST ((volatile unsigned short *)SWRST) +#define pSYSCR ((volatile unsigned short *)SYSCR) +#define pSIC_RVECT ((void * volatile *)SIC_RVECT) +#define pSIC_IMASK ((volatile unsigned long *)SIC_IMASK) +#define pSIC_IAR0 ((volatile unsigned long *)SIC_IAR0) +#define pSIC_IAR1 ((volatile unsigned long *)SIC_IAR1) +#define pSIC_IAR2 ((volatile unsigned long *)SIC_IAR2) +#define pSIC_IAR3 ((volatile unsigned long *)SIC_IAR3) +#define pSIC_ISR ((volatile unsigned long *)SIC_ISR) +#define pSIC_IWR ((volatile unsigned long *)SIC_IWR) + +/* Watchdog Timer (0xFFC00200 - 0xFFC002FF) */ +#define pWDOG_CTL ((volatile unsigned short *)WDOG_CTL) +#define pWDOG_CNT ((volatile unsigned long *)WDOG_CNT) +#define pWDOG_STAT ((volatile unsigned long *)WDOG_STAT) + +/* Real Time Clock (0xFFC00300 - 0xFFC003FF) */ +#define pRTC_STAT ((volatile unsigned long *)RTC_STAT) +#define pRTC_ICTL ((volatile unsigned short *)RTC_ICTL) +#define pRTC_ISTAT ((volatile unsigned short *)RTC_ISTAT) +#define pRTC_SWCNT ((volatile unsigned short *)RTC_SWCNT) +#define pRTC_ALARM ((volatile unsigned long *)RTC_ALARM) +#define pRTC_FAST ((volatile unsigned short *)RTC_FAST) +#define pRTC_PREN ((volatile unsigned short *)RTC_PREN) + +/* UART0 Controller (0xFFC00400 - 0xFFC004FF) */ +#define pUART0_THR ((volatile unsigned short *)UART0_THR) +#define pUART0_RBR ((volatile unsigned short *)UART0_RBR) +#define pUART0_DLL ((volatile unsigned short *)UART0_DLL) +#define pUART0_IER ((volatile unsigned short *)UART0_IER) +#define pUART0_DLH ((volatile unsigned short *)UART0_DLH) +#define pUART0_IIR ((volatile unsigned short *)UART0_IIR) +#define pUART0_LCR ((volatile unsigned short *)UART0_LCR) +#define pUART0_MCR ((volatile unsigned short *)UART0_MCR) +#define pUART0_LSR ((volatile unsigned short *)UART0_LSR) +#define pUART0_MSR ((volatile unsigned short *)UART0_LSR) +#define pUART0_SCR ((volatile unsigned short *)UART0_SCR) +#define pUART0_GCTL ((volatile unsigned short *)UART0_GCTL) + +/* SPI Controller (0xFFC00500 - 0xFFC005FF) */ +#define pSPI_CTL ((volatile unsigned short *)SPI_CTL) +#define pSPI_FLG ((volatile unsigned short *)SPI_FLG) +#define pSPI_STAT ((volatile unsigned short *)SPI_STAT) +#define pSPI_TDBR ((volatile unsigned short *)SPI_TDBR) +#define pSPI_RDBR ((volatile unsigned short *)SPI_RDBR) +#define pSPI_BAUD ((volatile unsigned short *)SPI_BAUD) +#define pSPI_SHADOW ((volatile unsigned short *)SPI_SHADOW) + +/* TIMER0-7 Registers (0xFFC00600 - 0xFFC006FF) */ +#define pTIMER0_CONFIG ((volatile unsigned short *)TIMER0_CONFIG) +#define pTIMER0_COUNTER ((volatile unsigned long *)TIMER0_COUNTER) +#define pTIMER0_PERIOD ((volatile unsigned long *)TIMER0_PERIOD) +#define pTIMER0_WIDTH ((volatile unsigned long *)TIMER0_WIDTH) + +#define pTIMER1_CONFIG ((volatile unsigned short *)TIMER1_CONFIG) +#define pTIMER1_COUNTER ((volatile unsigned long *)TIMER1_COUNTER) +#define pTIMER1_PERIOD ((volatile unsigned long *)TIMER1_PERIOD) +#define pTIMER1_WIDTH ((volatile unsigned long *)TIMER1_WIDTH) + +#define pTIMER2_CONFIG ((volatile unsigned short *)TIMER2_CONFIG) +#define pTIMER2_COUNTER ((volatile unsigned long *)TIMER2_COUNTER) +#define pTIMER2_PERIOD ((volatile unsigned long *)TIMER2_PERIOD) +#define pTIMER2_WIDTH ((volatile unsigned long *)TIMER2_WIDTH) + +#define pTIMER3_CONFIG ((volatile unsigned short *)TIMER3_CONFIG) +#define pTIMER3_COUNTER ((volatile unsigned long *)TIMER3_COUNTER) +#define pTIMER3_PERIOD ((volatile unsigned long *)TIMER3_PERIOD) +#define pTIMER3_WIDTH ((volatile unsigned long *)TIMER3_WIDTH) + +#define pTIMER4_CONFIG ((volatile unsigned short *)TIMER4_CONFIG) +#define pTIMER4_COUNTER ((volatile unsigned long *)TIMER4_COUNTER) +#define pTIMER4_PERIOD ((volatile unsigned long *)TIMER4_PERIOD) +#define pTIMER4_WIDTH ((volatile unsigned long *)TIMER4_WIDTH) + +#define pTIMER5_CONFIG ((volatile unsigned short *)TIMER5_CONFIG) +#define pTIMER5_COUNTER ((volatile unsigned long *)TIMER5_COUNTER) +#define pTIMER5_PERIOD ((volatile unsigned long *)TIMER5_PERIOD) +#define pTIMER5_WIDTH ((volatile unsigned long *)TIMER5_WIDTH) + +#define pTIMER6_CONFIG ((volatile unsigned short *)TIMER6_CONFIG) +#define pTIMER6_COUNTER ((volatile unsigned long *)TIMER6_COUNTER) +#define pTIMER6_PERIOD ((volatile unsigned long *)TIMER6_PERIOD) +#define pTIMER6_WIDTH ((volatile unsigned long *)TIMER6_WIDTH) + +#define pTIMER7_CONFIG ((volatile unsigned short *)TIMER7_CONFIG) +#define pTIMER7_COUNTER ((volatile unsigned long *)TIMER7_COUNTER) +#define pTIMER7_PERIOD ((volatile unsigned long *)TIMER7_PERIOD) +#define pTIMER7_WIDTH ((volatile unsigned long *)TIMER7_WIDTH) + +#define pTIMER_ENABLE ((volatile unsigned short *)TIMER_ENABLE) +#define pTIMER_DISABLE ((volatile unsigned short *)TIMER_DISABLE) +#define pTIMER_STATUS ((volatile unsigned long *)TIMER_STATUS) + +/* General Purpose I/O Port F (0xFFC00700 - 0xFFC007FF) */ +#define pPORTFIO ((volatile unsigned short *)PORTFIO) +#define pPORTFIO_CLEAR ((volatile unsigned short *)PORTFIO_CLEAR) +#define pPORTFIO_SET ((volatile unsigned short *)PORTFIO_SET) +#define pPORTFIO_TOGGLE ((volatile unsigned short *)PORTFIO_TOGGLE) +#define pPORTFIO_MASKA ((volatile unsigned short *)PORTFIO_MASKA) +#define pPORTFIO_MASKA_CLEAR ((volatile unsigned short *)PORTFIO_MASKA_CLEAR) +#define pPORTFIO_MASKA_SET ((volatile unsigned short *)PORTFIO_MASKA_SET) +#define pPORTFIO_MASKA_TOGGLE ((volatile unsigned short *)PORTFIO_MASKA_TOGGLE) +#define pPORTFIO_MASKB ((volatile unsigned short *)PORTFIO_MASKB) +#define pPORTFIO_MASKB_CLEAR ((volatile unsigned short *)PORTFIO_MASKB_CLEAR) +#define pPORTFIO_MASKB_SET ((volatile unsigned short *)PORTFIO_MASKB_SET) +#define pPORTFIO_MASKB_TOGGLE ((volatile unsigned short *)PORTFIO_MASKB_TOGGLE) +#define pPORTFIO_DIR ((volatile unsigned short *)PORTFIO_DIR) +#define pPORTFIO_POLAR ((volatile unsigned short *)PORTFIO_POLAR) +#define pPORTFIO_EDGE ((volatile unsigned short *)PORTFIO_EDGE) +#define pPORTFIO_BOTH ((volatile unsigned short *)PORTFIO_BOTH) +#define pPORTFIO_INEN ((volatile unsigned short *)PORTFIO_INEN) + +#define pFIO_DIR pPORTFIO_DIR +#define pFIO_FLAG_C pPORTFIO_CLEAR +#define pFIO_FLAG_S pPORTFIO_SET +#define pFIO_INEN pPORTFIO_INEN +#define pFIO_FLAG_D pPORTFIO + +/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */ +#define pSPORT0_TCR1 ((volatile unsigned short *)SPORT0_TCR1) +#define pSPORT0_TCR2 ((volatile unsigned short *)SPORT0_TCR2) +#define pSPORT0_TCLKDIV ((volatile unsigned short *)SPORT0_TCLKDIV) +#define pSPORT0_TFSDIV ((volatile unsigned short *)SPORT0_TFSDIV) +#define pSPORT0_TX ((volatile unsigned long *)SPORT0_TX) +#define pSPORT0_RX ((volatile unsigned long *)SPORT0_RX) +#define pSPORT0_TX32 ((volatile unsigned long *)SPORT0_TX) +#define pSPORT0_RX32 ((volatile unsigned long *)SPORT0_RX) +#define pSPORT0_TX16 ((volatile unsigned short *)SPORT0_TX) +#define pSPORT0_RX16 ((volatile unsigned short *)SPORT0_RX) +#define pSPORT0_RCR1 ((volatile unsigned short *)SPORT0_RCR1) +#define pSPORT0_RCR2 ((volatile unsigned short *)SPORT0_RCR2) +#define pSPORT0_RCLKDIV ((volatile unsigned short *)SPORT0_RCLKDIV) +#define pSPORT0_RFSDIV ((volatile unsigned short *)SPORT0_RFSDIV) +#define pSPORT0_STAT ((volatile unsigned short *)SPORT0_STAT) +#define pSPORT0_CHNL ((volatile unsigned short *)SPORT0_CHNL) +#define pSPORT0_MCMC1 ((volatile unsigned short *)SPORT0_MCMC1) +#define pSPORT0_MCMC2 ((volatile unsigned short *)SPORT0_MCMC2) +#define pSPORT0_MTCS0 ((volatile unsigned long *)SPORT0_MTCS0) +#define pSPORT0_MTCS1 ((volatile unsigned long *)SPORT0_MTCS1) +#define pSPORT0_MTCS2 ((volatile unsigned long *)SPORT0_MTCS2) +#define pSPORT0_MTCS3 ((volatile unsigned long *)SPORT0_MTCS3) +#define pSPORT0_MRCS0 ((volatile unsigned long *)SPORT0_MRCS0) +#define pSPORT0_MRCS1 ((volatile unsigned long *)SPORT0_MRCS1) +#define pSPORT0_MRCS2 ((volatile unsigned long *)SPORT0_MRCS2) +#define pSPORT0_MRCS3 ((volatile unsigned long *)SPORT0_MRCS3) + +/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */ +#define pSPORT1_TCR1 ((volatile unsigned short *)SPORT1_TCR1) +#define pSPORT1_TCR2 ((volatile unsigned short *)SPORT1_TCR2) +#define pSPORT1_TCLKDIV ((volatile unsigned short *)SPORT1_TCLKDIV) +#define pSPORT1_TFSDIV ((volatile unsigned short *)SPORT1_TFSDIV) +#define pSPORT1_TX ((volatile unsigned long *)SPORT1_TX) +#define pSPORT1_RX ((volatile unsigned long *)SPORT1_RX) +#define pSPORT1_TX32 ((volatile unsigned long *)SPORT1_TX) +#define pSPORT1_RX32 ((volatile unsigned long *)SPORT1_RX) +#define pSPORT1_TX16 ((volatile unsigned short *)SPORT1_TX) +#define pSPORT1_RX16 ((volatile unsigned short *)SPORT1_RX) +#define pSPORT1_RCR1 ((volatile unsigned short *)SPORT1_RCR1) +#define pSPORT1_RCR2 ((volatile unsigned short *)SPORT1_RCR2) +#define pSPORT1_RCLKDIV ((volatile unsigned short *)SPORT1_RCLKDIV) +#define pSPORT1_RFSDIV ((volatile unsigned short *)SPORT1_RFSDIV) +#define pSPORT1_STAT ((volatile unsigned short *)SPORT1_STAT) +#define pSPORT1_CHNL ((volatile unsigned short *)SPORT1_CHNL) +#define pSPORT1_MCMC1 ((volatile unsigned short *)SPORT1_MCMC1) +#define pSPORT1_MCMC2 ((volatile unsigned short *)SPORT1_MCMC2) +#define pSPORT1_MTCS0 ((volatile unsigned long *)SPORT1_MTCS0) +#define pSPORT1_MTCS1 ((volatile unsigned long *)SPORT1_MTCS1) +#define pSPORT1_MTCS2 ((volatile unsigned long *)SPORT1_MTCS2) +#define pSPORT1_MTCS3 ((volatile unsigned long *)SPORT1_MTCS3) +#define pSPORT1_MRCS0 ((volatile unsigned long *)SPORT1_MRCS0) +#define pSPORT1_MRCS1 ((volatile unsigned long *)SPORT1_MRCS1) +#define pSPORT1_MRCS2 ((volatile unsigned long *)SPORT1_MRCS2) +#define pSPORT1_MRCS3 ((volatile unsigned long *)SPORT1_MRCS3) + +/* External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */ +#define pEBIU_AMGCTL ((volatile unsigned short *)EBIU_AMGCTL) +#define pEBIU_AMBCTL0 ((volatile unsigned long *)EBIU_AMBCTL0) +#define pEBIU_AMBCTL1 ((volatile unsigned long *)EBIU_AMBCTL1) +#define pEBIU_SDGCTL ((volatile unsigned long *)EBIU_SDGCTL) +#define pEBIU_SDBCTL ((volatile unsigned short *)EBIU_SDBCTL) +#define pEBIU_SDRRC ((volatile unsigned short *)EBIU_SDRRC) +#define pEBIU_SDSTAT ((volatile unsigned short *)EBIU_SDSTAT) + +/* DMA Traffic Control Registers */ +#define pDMA_TCPER ((volatile unsigned short *)DMA_TCPER) +#define pDMA_TCCNT ((volatile unsigned short *)DMA_TCCNT) + +/* DMA Controller */ +#define pDMA0_CONFIG ((volatile unsigned short *)DMA0_CONFIG) +#define pDMA0_NEXT_DESC_PTR ((void * volatile *)DMA0_NEXT_DESC_PTR) +#define pDMA0_START_ADDR ((void * volatile *)DMA0_START_ADDR) +#define pDMA0_X_COUNT ((volatile unsigned short *)DMA0_X_COUNT) +#define pDMA0_Y_COUNT ((volatile unsigned short *)DMA0_Y_COUNT) +#define pDMA0_X_MODIFY ((volatile signed short *)DMA0_X_MODIFY) +#define pDMA0_Y_MODIFY ((volatile signed short *)DMA0_Y_MODIFY) +#define pDMA0_CURR_DESC_PTR ((void * volatile *)DMA0_CURR_DESC_PTR) +#define pDMA0_CURR_ADDR ((void * volatile *)DMA0_CURR_ADDR) +#define pDMA0_CURR_X_COUNT ((volatile unsigned short *)DMA0_CURR_X_COUNT) +#define pDMA0_CURR_Y_COUNT ((volatile unsigned short *)DMA0_CURR_Y_COUNT) +#define pDMA0_IRQ_STATUS ((volatile unsigned short *)DMA0_IRQ_STATUS) +#define pDMA0_PERIPHERAL_MAP ((volatile unsigned short *)DMA0_PERIPHERAL_MAP) + +#define pDMA1_CONFIG ((volatile unsigned short *)DMA1_CONFIG) +#define pDMA1_NEXT_DESC_PTR ((void * volatile *)DMA1_NEXT_DESC_PTR) +#define pDMA1_START_ADDR ((void * volatile *)DMA1_START_ADDR) +#define pDMA1_X_COUNT ((volatile unsigned short *)DMA1_X_COUNT) +#define pDMA1_Y_COUNT ((volatile unsigned short *)DMA1_Y_COUNT) +#define pDMA1_X_MODIFY ((volatile signed short *)DMA1_X_MODIFY) +#define pDMA1_Y_MODIFY ((volatile signed short *)DMA1_Y_MODIFY) +#define pDMA1_CURR_DESC_PTR ((void * volatile *)DMA1_CURR_DESC_PTR) +#define pDMA1_CURR_ADDR ((void * volatile *)DMA1_CURR_ADDR) +#define pDMA1_CURR_X_COUNT ((volatile unsigned short *)DMA1_CURR_X_COUNT) +#define pDMA1_CURR_Y_COUNT ((volatile unsigned short *)DMA1_CURR_Y_COUNT) +#define pDMA1_IRQ_STATUS ((volatile unsigned short *)DMA1_IRQ_STATUS) +#define pDMA1_PERIPHERAL_MAP ((volatile unsigned short *)DMA1_PERIPHERAL_MAP) + +#define pDMA2_CONFIG ((volatile unsigned short *)DMA2_CONFIG) +#define pDMA2_NEXT_DESC_PTR ((void * volatile *)DMA2_NEXT_DESC_PTR) +#define pDMA2_START_ADDR ((void * volatile *)DMA2_START_ADDR) +#define pDMA2_X_COUNT ((volatile unsigned short *)DMA2_X_COUNT) +#define pDMA2_Y_COUNT ((volatile unsigned short *)DMA2_Y_COUNT) +#define pDMA2_X_MODIFY ((volatile signed short *)DMA2_X_MODIFY) +#define pDMA2_Y_MODIFY ((volatile signed short *)DMA2_Y_MODIFY) +#define pDMA2_CURR_DESC_PTR ((void * volatile *)DMA2_CURR_DESC_PTR) +#define pDMA2_CURR_ADDR ((void * volatile *)DMA2_CURR_ADDR) +#define pDMA2_CURR_X_COUNT ((volatile unsigned short *)DMA2_CURR_X_COUNT) +#define pDMA2_CURR_Y_COUNT ((volatile unsigned short *)DMA2_CURR_Y_COUNT) +#define pDMA2_IRQ_STATUS ((volatile unsigned short *)DMA2_IRQ_STATUS) +#define pDMA2_PERIPHERAL_MAP ((volatile unsigned short *)DMA2_PERIPHERAL_MAP) + +#define pDMA3_CONFIG ((volatile unsigned short *)DMA3_CONFIG) +#define pDMA3_NEXT_DESC_PTR ((void * volatile *)DMA3_NEXT_DESC_PTR) +#define pDMA3_START_ADDR ((void * volatile *)DMA3_START_ADDR) +#define pDMA3_X_COUNT ((volatile unsigned short *)DMA3_X_COUNT) +#define pDMA3_Y_COUNT ((volatile unsigned short *)DMA3_Y_COUNT) +#define pDMA3_X_MODIFY ((volatile signed short *)DMA3_X_MODIFY) +#define pDMA3_Y_MODIFY ((volatile signed short *)DMA3_Y_MODIFY) +#define pDMA3_CURR_DESC_PTR ((void * volatile *)DMA3_CURR_DESC_PTR) +#define pDMA3_CURR_ADDR ((void * volatile *)DMA3_CURR_ADDR) +#define pDMA3_CURR_X_COUNT ((volatile unsigned short *)DMA3_CURR_X_COUNT) +#define pDMA3_CURR_Y_COUNT ((volatile unsigned short *)DMA3_CURR_Y_COUNT) +#define pDMA3_IRQ_STATUS ((volatile unsigned short *)DMA3_IRQ_STATUS) +#define pDMA3_PERIPHERAL_MAP ((volatile unsigned short *)DMA3_PERIPHERAL_MAP) + +#define pDMA4_CONFIG ((volatile unsigned short *)DMA4_CONFIG) +#define pDMA4_NEXT_DESC_PTR ((void * volatile *)DMA4_NEXT_DESC_PTR) +#define pDMA4_START_ADDR ((void * volatile *)DMA4_START_ADDR) +#define pDMA4_X_COUNT ((volatile unsigned short *)DMA4_X_COUNT) +#define pDMA4_Y_COUNT ((volatile unsigned short *)DMA4_Y_COUNT) +#define pDMA4_X_MODIFY ((volatile signed short *)DMA4_X_MODIFY) +#define pDMA4_Y_MODIFY ((volatile signed short *)DMA4_Y_MODIFY) +#define pDMA4_CURR_DESC_PTR ((void * volatile *)DMA4_CURR_DESC_PTR) +#define pDMA4_CURR_ADDR ((void * volatile *)DMA4_CURR_ADDR) +#define pDMA4_CURR_X_COUNT ((volatile unsigned short *)DMA4_CURR_X_COUNT) +#define pDMA4_CURR_Y_COUNT ((volatile unsigned short *)DMA4_CURR_Y_COUNT) +#define pDMA4_IRQ_STATUS ((volatile unsigned short *)DMA4_IRQ_STATUS) +#define pDMA4_PERIPHERAL_MAP ((volatile unsigned short *)DMA4_PERIPHERAL_MAP) + +#define pDMA5_CONFIG ((volatile unsigned short *)DMA5_CONFIG) +#define pDMA5_NEXT_DESC_PTR ((void * volatile *)DMA5_NEXT_DESC_PTR) +#define pDMA5_START_ADDR ((void * volatile *)DMA5_START_ADDR) +#define pDMA5_X_COUNT ((volatile unsigned short *)DMA5_X_COUNT) +#define pDMA5_Y_COUNT ((volatile unsigned short *)DMA5_Y_COUNT) +#define pDMA5_X_MODIFY ((volatile signed short *)DMA5_X_MODIFY) +#define pDMA5_Y_MODIFY ((volatile signed short *)DMA5_Y_MODIFY) +#define pDMA5_CURR_DESC_PTR ((void * volatile *)DMA5_CURR_DESC_PTR) +#define pDMA5_CURR_ADDR ((void * volatile *)DMA5_CURR_ADDR) +#define pDMA5_CURR_X_COUNT ((volatile unsigned short *)DMA5_CURR_X_COUNT) +#define pDMA5_CURR_Y_COUNT ((volatile unsigned short *)DMA5_CURR_Y_COUNT) +#define pDMA5_IRQ_STATUS ((volatile unsigned short *)DMA5_IRQ_STATUS) +#define pDMA5_PERIPHERAL_MAP ((volatile unsigned short *)DMA5_PERIPHERAL_MAP) + +#define pDMA6_CONFIG ((volatile unsigned short *)DMA6_CONFIG) +#define pDMA6_NEXT_DESC_PTR ((void * volatile *)DMA6_NEXT_DESC_PTR) +#define pDMA6_START_ADDR ((void * volatile *)DMA6_START_ADDR) +#define pDMA6_X_COUNT ((volatile unsigned short *)DMA6_X_COUNT) +#define pDMA6_Y_COUNT ((volatile unsigned short *)DMA6_Y_COUNT) +#define pDMA6_X_MODIFY ((volatile signed short *)DMA6_X_MODIFY) +#define pDMA6_Y_MODIFY ((volatile signed short *)DMA6_Y_MODIFY) +#define pDMA6_CURR_DESC_PTR ((void * volatile *)DMA6_CURR_DESC_PTR) +#define pDMA6_CURR_ADDR ((void * volatile *)DMA6_CURR_ADDR) +#define pDMA6_CURR_X_COUNT ((volatile unsigned short *)DMA6_CURR_X_COUNT) +#define pDMA6_CURR_Y_COUNT ((volatile unsigned short *)DMA6_CURR_Y_COUNT) +#define pDMA6_IRQ_STATUS ((volatile unsigned short *)DMA6_IRQ_STATUS) +#define pDMA6_PERIPHERAL_MAP ((volatile unsigned short *)DMA6_PERIPHERAL_MAP) + +#define pDMA7_CONFIG ((volatile unsigned short *)DMA7_CONFIG) +#define pDMA7_NEXT_DESC_PTR ((void * volatile *)DMA7_NEXT_DESC_PTR) +#define pDMA7_START_ADDR ((void * volatile *)DMA7_START_ADDR) +#define pDMA7_X_COUNT ((volatile unsigned short *)DMA7_X_COUNT) +#define pDMA7_Y_COUNT ((volatile unsigned short *)DMA7_Y_COUNT) +#define pDMA7_X_MODIFY ((volatile signed short *)DMA7_X_MODIFY) +#define pDMA7_Y_MODIFY ((volatile signed short *)DMA7_Y_MODIFY) +#define pDMA7_CURR_DESC_PTR ((void * volatile *)DMA7_CURR_DESC_PTR) +#define pDMA7_CURR_ADDR ((void * volatile *)DMA7_CURR_ADDR) +#define pDMA7_CURR_X_COUNT ((volatile unsigned short *)DMA7_CURR_X_COUNT) +#define pDMA7_CURR_Y_COUNT ((volatile unsigned short *)DMA7_CURR_Y_COUNT) +#define pDMA7_IRQ_STATUS ((volatile unsigned short *)DMA7_IRQ_STATUS) +#define pDMA7_PERIPHERAL_MAP ((volatile unsigned short *)DMA7_PERIPHERAL_MAP) + +#define pDMA8_CONFIG ((volatile unsigned short *)DMA8_CONFIG) +#define pDMA8_NEXT_DESC_PTR ((void * volatile *)DMA8_NEXT_DESC_PTR) +#define pDMA8_START_ADDR ((void * volatile *)DMA8_START_ADDR) +#define pDMA8_X_COUNT ((volatile unsigned short *)DMA8_X_COUNT) +#define pDMA8_Y_COUNT ((volatile unsigned short *)DMA8_Y_COUNT) +#define pDMA8_X_MODIFY ((volatile signed short *)DMA8_X_MODIFY) +#define pDMA8_Y_MODIFY ((volatile signed short *)DMA8_Y_MODIFY) +#define pDMA8_CURR_DESC_PTR ((void * volatile *)DMA8_CURR_DESC_PTR) +#define pDMA8_CURR_ADDR ((void * volatile *)DMA8_CURR_ADDR) +#define pDMA8_CURR_X_COUNT ((volatile unsigned short *)DMA8_CURR_X_COUNT) +#define pDMA8_CURR_Y_COUNT ((volatile unsigned short *)DMA8_CURR_Y_COUNT) +#define pDMA8_IRQ_STATUS ((volatile unsigned short *)DMA8_IRQ_STATUS) +#define pDMA8_PERIPHERAL_MAP ((volatile unsigned short *)DMA8_PERIPHERAL_MAP) + +#define pDMA9_CONFIG ((volatile unsigned short *)DMA9_CONFIG) +#define pDMA9_NEXT_DESC_PTR ((void * volatile *)DMA9_NEXT_DESC_PTR) +#define pDMA9_START_ADDR ((void * volatile *)DMA9_START_ADDR) +#define pDMA9_X_COUNT ((volatile unsigned short *)DMA9_X_COUNT) +#define pDMA9_Y_COUNT ((volatile unsigned short *)DMA9_Y_COUNT) +#define pDMA9_X_MODIFY ((volatile signed short *)DMA9_X_MODIFY) +#define pDMA9_Y_MODIFY ((volatile signed short *)DMA9_Y_MODIFY) +#define pDMA9_CURR_DESC_PTR ((void * volatile *)DMA9_CURR_DESC_PTR) +#define pDMA9_CURR_ADDR ((void * volatile *)DMA9_CURR_ADDR) +#define pDMA9_CURR_X_COUNT ((volatile unsigned short *)DMA9_CURR_X_COUNT) +#define pDMA9_CURR_Y_COUNT ((volatile unsigned short *)DMA9_CURR_Y_COUNT) +#define pDMA9_IRQ_STATUS ((volatile unsigned short *)DMA9_IRQ_STATUS) +#define pDMA9_PERIPHERAL_MAP ((volatile unsigned short *)DMA9_PERIPHERAL_MAP) + +#define pDMA10_CONFIG ((volatile unsigned short *)DMA10_CONFIG) +#define pDMA10_NEXT_DESC_PTR ((void * volatile *)DMA10_NEXT_DESC_PTR) +#define pDMA10_START_ADDR ((void * volatile *)DMA10_START_ADDR) +#define pDMA10_X_COUNT ((volatile unsigned short *)DMA10_X_COUNT) +#define pDMA10_Y_COUNT ((volatile unsigned short *)DMA10_Y_COUNT) +#define pDMA10_X_MODIFY ((volatile signed short *)DMA10_X_MODIFY) +#define pDMA10_Y_MODIFY ((volatile signed short *)DMA10_Y_MODIFY) +#define pDMA10_CURR_DESC_PTR ((void * volatile *)DMA10_CURR_DESC_PTR) +#define pDMA10_CURR_ADDR ((void * volatile *)DMA10_CURR_ADDR) +#define pDMA10_CURR_X_COUNT ((volatile unsigned short *)DMA10_CURR_X_COUNT) +#define pDMA10_CURR_Y_COUNT ((volatile unsigned short *)DMA10_CURR_Y_COUNT) +#define pDMA10_IRQ_STATUS ((volatile unsigned short *)DMA10_IRQ_STATUS) +#define pDMA10_PERIPHERAL_MAP ((volatile unsigned short *)DMA10_PERIPHERAL_MAP) + +#define pDMA11_CONFIG ((volatile unsigned short *)DMA11_CONFIG) +#define pDMA11_NEXT_DESC_PTR ((void * volatile *)DMA11_NEXT_DESC_PTR) +#define pDMA11_START_ADDR ((void * volatile *)DMA11_START_ADDR) +#define pDMA11_X_COUNT ((volatile unsigned short *)DMA11_X_COUNT) +#define pDMA11_Y_COUNT ((volatile unsigned short *)DMA11_Y_COUNT) +#define pDMA11_X_MODIFY ((volatile signed short *)DMA11_X_MODIFY) +#define pDMA11_Y_MODIFY ((volatile signed short *)DMA11_Y_MODIFY) +#define pDMA11_CURR_DESC_PTR ((void * volatile *)DMA11_CURR_DESC_PTR) +#define pDMA11_CURR_ADDR ((void * volatile *)DMA11_CURR_ADDR) +#define pDMA11_CURR_X_COUNT ((volatile unsigned short *)DMA11_CURR_X_COUNT) +#define pDMA11_CURR_Y_COUNT ((volatile unsigned short *)DMA11_CURR_Y_COUNT) +#define pDMA11_IRQ_STATUS ((volatile unsigned short *)DMA11_IRQ_STATUS) +#define pDMA11_PERIPHERAL_MAP ((volatile unsigned short *)DMA11_PERIPHERAL_MAP) + +#define pMDMA_D0_CONFIG ((volatile unsigned short *)MDMA_D0_CONFIG) +#define pMDMA_D0_NEXT_DESC_PTR ((void * volatile *)MDMA_D0_NEXT_DESC_PTR) +#define pMDMA_D0_START_ADDR ((void * volatile *)MDMA_D0_START_ADDR) +#define pMDMA_D0_X_COUNT ((volatile unsigned short *)MDMA_D0_X_COUNT) +#define pMDMA_D0_Y_COUNT ((volatile unsigned short *)MDMA_D0_Y_COUNT) +#define pMDMA_D0_X_MODIFY ((volatile signed short *)MDMA_D0_X_MODIFY) +#define pMDMA_D0_Y_MODIFY ((volatile signed short *)MDMA_D0_Y_MODIFY) +#define pMDMA_D0_CURR_DESC_PTR ((void * volatile *)MDMA_D0_CURR_DESC_PTR) +#define pMDMA_D0_CURR_ADDR ((void * volatile *)MDMA_D0_CURR_ADDR) +#define pMDMA_D0_CURR_X_COUNT ((volatile unsigned short *)MDMA_D0_CURR_X_COUNT) +#define pMDMA_D0_CURR_Y_COUNT ((volatile unsigned short *)MDMA_D0_CURR_Y_COUNT) +#define pMDMA_D0_IRQ_STATUS ((volatile unsigned short *)MDMA_D0_IRQ_STATUS) +#define pMDMA_D0_PERIPHERAL_MAP ((volatile unsigned short *)MDMA_D0_PERIPHERAL_MAP) + +#define pMDMA_S0_CONFIG ((volatile unsigned short *)MDMA_S0_CONFIG) +#define pMDMA_S0_NEXT_DESC_PTR ((void * volatile *)MDMA_S0_NEXT_DESC_PTR) +#define pMDMA_S0_START_ADDR ((void * volatile *)MDMA_S0_START_ADDR) +#define pMDMA_S0_X_COUNT ((volatile unsigned short *)MDMA_S0_X_COUNT) +#define pMDMA_S0_Y_COUNT ((volatile unsigned short *)MDMA_S0_Y_COUNT) +#define pMDMA_S0_X_MODIFY ((volatile signed short *)MDMA_S0_X_MODIFY) +#define pMDMA_S0_Y_MODIFY ((volatile signed short *)MDMA_S0_Y_MODIFY) +#define pMDMA_S0_CURR_DESC_PTR ((void * volatile *)MDMA_S0_CURR_DESC_PTR) +#define pMDMA_S0_CURR_ADDR ((void * volatile *)MDMA_S0_CURR_ADDR) +#define pMDMA_S0_CURR_X_COUNT ((volatile unsigned short *)MDMA_S0_CURR_X_COUNT) +#define pMDMA_S0_CURR_Y_COUNT ((volatile unsigned short *)MDMA_S0_CURR_Y_COUNT) +#define pMDMA_S0_IRQ_STATUS ((volatile unsigned short *)MDMA_S0_IRQ_STATUS) +#define pMDMA_S0_PERIPHERAL_MAP ((volatile unsigned short *)MDMA_S0_PERIPHERAL_MAP) + +#define pMDMA_D1_CONFIG ((volatile unsigned short *)MDMA_D1_CONFIG) +#define pMDMA_D1_NEXT_DESC_PTR ((void * volatile *)MDMA_D1_NEXT_DESC_PTR) +#define pMDMA_D1_START_ADDR ((void * volatile *)MDMA_D1_START_ADDR) +#define pMDMA_D1_X_COUNT ((volatile unsigned short *)MDMA_D1_X_COUNT) +#define pMDMA_D1_Y_COUNT ((volatile unsigned short *)MDMA_D1_Y_COUNT) +#define pMDMA_D1_X_MODIFY ((volatile signed short *)MDMA_D1_X_MODIFY) +#define pMDMA_D1_Y_MODIFY ((volatile signed short *)MDMA_D1_Y_MODIFY) +#define pMDMA_D1_CURR_DESC_PTR ((void * volatile *)MDMA_D1_CURR_DESC_PTR) +#define pMDMA_D1_CURR_ADDR ((void * volatile *)MDMA_D1_CURR_ADDR) +#define pMDMA_D1_CURR_X_COUNT ((volatile unsigned short *)MDMA_D1_CURR_X_COUNT) +#define pMDMA_D1_CURR_Y_COUNT ((volatile unsigned short *)MDMA_D1_CURR_Y_COUNT) +#define pMDMA_D1_IRQ_STATUS ((volatile unsigned short *)MDMA_D1_IRQ_STATUS) +#define pMDMA_D1_PERIPHERAL_MAP ((volatile unsigned short *)MDMA_D1_PERIPHERAL_MAP) + +#define pMDMA_S1_CONFIG ((volatile unsigned short *)MDMA_S1_CONFIG) +#define pMDMA_S1_NEXT_DESC_PTR ((void * volatile *)MDMA_S1_NEXT_DESC_PTR) +#define pMDMA_S1_START_ADDR ((void * volatile *)MDMA_S1_START_ADDR) +#define pMDMA_S1_X_COUNT ((volatile unsigned short *)MDMA_S1_X_COUNT) +#define pMDMA_S1_Y_COUNT ((volatile unsigned short *)MDMA_S1_Y_COUNT) +#define pMDMA_S1_X_MODIFY ((volatile signed short *)MDMA_S1_X_MODIFY) +#define pMDMA_S1_Y_MODIFY ((volatile signed short *)MDMA_S1_Y_MODIFY) +#define pMDMA_S1_CURR_DESC_PTR ((void * volatile *)MDMA_S1_CURR_DESC_PTR) +#define pMDMA_S1_CURR_ADDR ((void * volatile *)MDMA_S1_CURR_ADDR) +#define pMDMA_S1_CURR_X_COUNT ((volatile unsigned short *)MDMA_S1_CURR_X_COUNT) +#define pMDMA_S1_CURR_Y_COUNT ((volatile unsigned short *)MDMA_S1_CURR_Y_COUNT) +#define pMDMA_S1_IRQ_STATUS ((volatile unsigned short *)MDMA_S1_IRQ_STATUS) +#define pMDMA_S1_PERIPHERAL_MAP ((volatile unsigned short *)MDMA_S1_PERIPHERAL_MAP) + +/* Parallel Peripheral Interface (0xFFC01000 - 0xFFC010FF) */ +#define pPPI_CONTROL ((volatile unsigned short *)PPI_CONTROL) +#define pPPI_STATUS ((volatile unsigned short *)PPI_STATUS) +#define pPPI_DELAY ((volatile unsigned short *)PPI_DELAY) +#define pPPI_COUNT ((volatile unsigned short *)PPI_COUNT) +#define pPPI_FRAME ((volatile unsigned short *)PPI_FRAME) + +/* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */ +#define pTWI_CLKDIV ((volatile unsigned short *)TWI_CLKDIV) +#define pTWI_CONTROL ((volatile unsigned short *)TWI_CONTROL) +#define pTWI_SLAVE_CTL ((volatile unsigned short *)TWI_SLAVE_CTL) +#define pTWI_SLAVE_STAT ((volatile unsigned short *)TWI_SLAVE_STAT) +#define pTWI_SLAVE_ADDR ((volatile unsigned short *)TWI_SLAVE_ADDR) +#define pTWI_MASTER_CTL ((volatile unsigned short *)TWI_MASTER_CTL) +#define pTWI_MASTER_STAT ((volatile unsigned short *)TWI_MASTER_STAT) +#define pTWI_MASTER_ADDR ((volatile unsigned short *)TWI_MASTER_ADDR) +#define pTWI_INT_STAT ((volatile unsigned short *)TWI_INT_STAT) +#define pTWI_INT_MASK ((volatile unsigned short *)TWI_INT_MASK) +#define pTWI_FIFO_CTL ((volatile unsigned short *)TWI_FIFO_CTL) +#define pTWI_FIFO_STAT ((volatile unsigned short *)TWI_FIFO_STAT) +#define pTWI_XMT_DATA8 ((volatile unsigned short *)TWI_XMT_DATA8) +#define pTWI_XMT_DATA16 ((volatile unsigned short *)TWI_XMT_DATA16) +#define pTWI_RCV_DATA8 ((volatile unsigned short *)TWI_RCV_DATA8) +#define pTWI_RCV_DATA16 ((volatile unsigned short *)TWI_RCV_DATA16) + +/* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF) */ +#define pPORTGIO ((volatile unsigned short *)PORTGIO) +#define pPORTGIO_CLEAR ((volatile unsigned short *)PORTGIO_CLEAR) +#define pPORTGIO_SET ((volatile unsigned short *)PORTGIO_SET) +#define pPORTGIO_TOGGLE ((volatile unsigned short *)PORTGIO_TOGGLE) +#define pPORTGIO_MASKA ((volatile unsigned short *)PORTGIO_MASKA) +#define pPORTGIO_MASKA_CLEAR ((volatile unsigned short *)PORTGIO_MASKA_CLEAR) +#define pPORTGIO_MASKA_SET ((volatile unsigned short *)PORTGIO_MASKA_SET) +#define pPORTGIO_MASKA_TOGGLE ((volatile unsigned short *)PORTGIO_MASKA_TOGGLE) +#define pPORTGIO_MASKB ((volatile unsigned short *)PORTGIO_MASKB) +#define pPORTGIO_MASKB_CLEAR ((volatile unsigned short *)PORTGIO_MASKB_CLEAR) +#define pPORTGIO_MASKB_SET ((volatile unsigned short *)PORTGIO_MASKB_SET) +#define pPORTGIO_MASKB_TOGGLE ((volatile unsigned short *)PORTGIO_MASKB_TOGGLE) +#define pPORTGIO_DIR ((volatile unsigned short *)PORTGIO_DIR) +#define pPORTGIO_POLAR ((volatile unsigned short *)PORTGIO_POLAR) +#define pPORTGIO_EDGE ((volatile unsigned short *)PORTGIO_EDGE) +#define pPORTGIO_BOTH ((volatile unsigned short *)PORTGIO_BOTH) +#define pPORTGIO_INEN ((volatile unsigned short *)PORTGIO_INEN) + +/* General Purpose I/O Port H (0xFFC01700 - 0xFFC017FF) */ +#define pPORTHIO ((volatile unsigned short *)PORTHIO) +#define pPORTHIO_CLEAR ((volatile unsigned short *)PORTHIO_CLEAR) +#define pPORTHIO_SET ((volatile unsigned short *)PORTHIO_SET) +#define pPORTHIO_TOGGLE ((volatile unsigned short *)PORTHIO_TOGGLE) +#define pPORTHIO_MASKA ((volatile unsigned short *)PORTHIO_MASKA) +#define pPORTHIO_MASKA_CLEAR ((volatile unsigned short *)PORTHIO_MASKA_CLEAR) +#define pPORTHIO_MASKA_SET ((volatile unsigned short *)PORTHIO_MASKA_SET) +#define pPORTHIO_MASKA_TOGGLE ((volatile unsigned short *)PORTHIO_MASKA_TOGGLE) +#define pPORTHIO_MASKB ((volatile unsigned short *)PORTHIO_MASKB) +#define pPORTHIO_MASKB_CLEAR ((volatile unsigned short *)PORTHIO_MASKB_CLEAR) +#define pPORTHIO_MASKB_SET ((volatile unsigned short *)PORTHIO_MASKB_SET) +#define pPORTHIO_MASKB_TOGGLE ((volatile unsigned short *)PORTHIO_MASKB_TOGGLE) +#define pPORTHIO_DIR ((volatile unsigned short *)PORTHIO_DIR) +#define pPORTHIO_POLAR ((volatile unsigned short *)PORTHIO_POLAR) +#define pPORTHIO_EDGE ((volatile unsigned short *)PORTHIO_EDGE) +#define pPORTHIO_BOTH ((volatile unsigned short *)PORTHIO_BOTH) +#define pPORTHIO_INEN ((volatile unsigned short *)PORTHIO_INEN) + +/* UART1 Controller (0xFFC02000 - 0xFFC020FF) */ +#define pUART1_THR ((volatile unsigned short *)UART1_THR) +#define pUART1_RBR ((volatile unsigned short *)UART1_RBR) +#define pUART1_DLL ((volatile unsigned short *)UART1_DLL) +#define pUART1_IER ((volatile unsigned short *)UART1_IER) +#define pUART1_DLH ((volatile unsigned short *)UART1_DLH) +#define pUART1_IIR ((volatile unsigned short *)UART1_IIR) +#define pUART1_LCR ((volatile unsigned short *)UART1_LCR) +#define pUART1_MCR ((volatile unsigned short *)UART1_MCR) +#define pUART1_LSR ((volatile unsigned short *)UART1_LSR) +#define pUART1_MSR ((volatile unsigned short *)UART1_LSR) +#define pUART1_SCR ((volatile unsigned short *)UART1_SCR) +#define pUART1_GCTL ((volatile unsigned short *)UART1_GCTL) + +/* default UART controller */ +#if (CONFIG_UART_CONSOLE==1) + +#define pUART_THR pUART1_THR +#define pUART_RBR pUART1_RBR +#define pUART_DLL pUART1_DLL +#define pUART_IER pUART1_IER +#define pUART_DLH pUART1_DLH +#define pUART_IIR pUART1_IIR +#define pUART_LCR pUART1_LCR +#define pUART_MCR pUART1_MCR +#define pUART_LSR pUART1_LSR +#define pUART_MSR pUART1_MSR +#define pUART_SCR pUART1_SCR +#define pUART_GCTL pUART1_GCTL + +#else + +#define pUART_THR pUART0_THR +#define pUART_RBR pUART0_RBR +#define pUART_DLL pUART0_DLL +#define pUART_IER pUART0_IER +#define pUART_DLH pUART0_DLH +#define pUART_IIR pUART0_IIR +#define pUART_LCR pUART0_LCR +#define pUART_MCR pUART0_MCR +#define pUART_LSR pUART0_LSR +#define pUART_MSR pUART0_MSR +#define pUART_SCR pUART0_SCR +#define pUART_GCTL pUART0_GCTL + +#endif + +/* CAN Controller (0xFFC02A00 - 0xFFC02FFF) */ +/* For Mailboxes 0-15 */ +#define pCAN_MC1 ((volatile unsigned short *)CAN_MC1) +#define pCAN_MD1 ((volatile unsigned short *)CAN_MD1) +#define pCAN_TRS1 ((volatile unsigned short *)CAN_TRS1) +#define pCAN_TRR1 ((volatile unsigned short *)CAN_TRR1) +#define pCAN_TA1 ((volatile unsigned short *)CAN_TA1) +#define pCAN_AA1 ((volatile unsigned short *)CAN_AA1) +#define pCAN_RMP1 ((volatile unsigned short *)CAN_RMP1) +#define pCAN_RML1 ((volatile unsigned short *)CAN_RML1) +#define pCAN_MBTIF1 ((volatile unsigned short *)CAN_MBTIF1) +#define pCAN_MBRIF1 ((volatile unsigned short *)CAN_MBRIF1) +#define pCAN_MBIM1 ((volatile unsigned short *)CAN_MBIM1) +#define pCAN_RFH1 ((volatile unsigned short *)CAN_RFH1) +#define pCAN_OPSS1 ((volatile unsigned short *)CAN_OPSS1) + +/* For Mailboxes 16-31 */ +#define pCAN_MC2 ((volatile unsigned short *)CAN_MC2) +#define pCAN_MD2 ((volatile unsigned short *)CAN_MD2) +#define pCAN_TRS2 ((volatile unsigned short *)CAN_TRS2) +#define pCAN_TRR2 ((volatile unsigned short *)CAN_TRR2) +#define pCAN_TA2 ((volatile unsigned short *)CAN_TA2) +#define pCAN_AA2 ((volatile unsigned short *)CAN_AA2) +#define pCAN_RMP2 ((volatile unsigned short *)CAN_RMP2) +#define pCAN_RML2 ((volatile unsigned short *)CAN_RML2) +#define pCAN_MBTIF2 ((volatile unsigned short *)CAN_MBTIF2) +#define pCAN_MBRIF2 ((volatile unsigned short *)CAN_MBRIF2) +#define pCAN_MBIM2 ((volatile unsigned short *)CAN_MBIM2) +#define pCAN_RFH2 ((volatile unsigned short *)CAN_RFH2) +#define pCAN_OPSS2 ((volatile unsigned short *)CAN_OPSS2) + +#define pCAN_CLOCK ((volatile unsigned short *)CAN_CLOCK) +#define pCAN_TIMING ((volatile unsigned short *)CAN_TIMING) +#define pCAN_DEBUG ((volatile unsigned short *)CAN_DEBUG) +#define pCAN_STATUS ((volatile unsigned short *)CAN_STATUS) +#define pCAN_CEC ((volatile unsigned short *)CAN_CEC) +#define pCAN_GIS ((volatile unsigned short *)CAN_GIS) +#define pCAN_GIM ((volatile unsigned short *)CAN_GIM) +#define pCAN_GIF ((volatile unsigned short *)CAN_GIF) +#define pCAN_CONTROL ((volatile unsigned short *)CAN_CONTROL) +#define pCAN_INTR ((volatile unsigned short *)CAN_INTR) +#define pCAN_SFCMVER ((volatile unsigned short *)CAN_SFCMVER) +#define pCAN_MBTD ((volatile unsigned short *)CAN_MBTD) +#define pCAN_EWR ((volatile unsigned short *)CAN_EWR) +#define pCAN_ESR ((volatile unsigned short *)CAN_ESR) +#define pCAN_UCREG ((volatile unsigned short *)CAN_UCREG) +#define pCAN_UCCNT ((volatile unsigned short *)CAN_UCCNT) +#define pCAN_UCRC ((volatile unsigned short *)CAN_UCRC) +#define pCAN_UCCNF ((volatile unsigned short *)CAN_UCCNF) +#define pCAN_SFCMVER2 ((volatile unsigned short *)CAN_SFCMVER2) + +/* Mailbox Acceptance Masks */ +#define pCAN_AM00L ((volatile unsigned short *)CAN_AM00L) +#define pCAN_AM00H ((volatile unsigned short *)CAN_AM00H) +#define pCAN_AM01L ((volatile unsigned short *)CAN_AM01L) +#define pCAN_AM01H ((volatile unsigned short *)CAN_AM01H) +#define pCAN_AM02L ((volatile unsigned short *)CAN_AM02L) +#define pCAN_AM02H ((volatile unsigned short *)CAN_AM02H) +#define pCAN_AM03L ((volatile unsigned short *)CAN_AM03L) +#define pCAN_AM03H ((volatile unsigned short *)CAN_AM03H) +#define pCAN_AM04L ((volatile unsigned short *)CAN_AM04L) +#define pCAN_AM04H ((volatile unsigned short *)CAN_AM04H) +#define pCAN_AM05L ((volatile unsigned short *)CAN_AM05L) +#define pCAN_AM05H ((volatile unsigned short *)CAN_AM05H) +#define pCAN_AM06L ((volatile unsigned short *)CAN_AM06L) +#define pCAN_AM06H ((volatile unsigned short *)CAN_AM06H) +#define pCAN_AM07L ((volatile unsigned short *)CAN_AM07L) +#define pCAN_AM07H ((volatile unsigned short *)CAN_AM07H) +#define pCAN_AM08L ((volatile unsigned short *)CAN_AM08L) +#define pCAN_AM08H ((volatile unsigned short *)CAN_AM08H) +#define pCAN_AM09L ((volatile unsigned short *)CAN_AM09L) +#define pCAN_AM09H ((volatile unsigned short *)CAN_AM09H) +#define pCAN_AM10L ((volatile unsigned short *)CAN_AM10L) +#define pCAN_AM10H ((volatile unsigned short *)CAN_AM10H) +#define pCAN_AM11L ((volatile unsigned short *)CAN_AM11L) +#define pCAN_AM11H ((volatile unsigned short *)CAN_AM11H) +#define pCAN_AM12L ((volatile unsigned short *)CAN_AM12L) +#define pCAN_AM12H ((volatile unsigned short *)CAN_AM12H) +#define pCAN_AM13L ((volatile unsigned short *)CAN_AM13L) +#define pCAN_AM13H ((volatile unsigned short *)CAN_AM13H) +#define pCAN_AM14L ((volatile unsigned short *)CAN_AM14L) +#define pCAN_AM14H ((volatile unsigned short *)CAN_AM14H) +#define pCAN_AM15L ((volatile unsigned short *)CAN_AM15L) +#define pCAN_AM15H ((volatile unsigned short *)CAN_AM15H) + +#define pCAN_AM16L ((volatile unsigned short *)CAN_AM16L) +#define pCAN_AM16H ((volatile unsigned short *)CAN_AM16H) +#define pCAN_AM17L ((volatile unsigned short *)CAN_AM17L) +#define pCAN_AM17H ((volatile unsigned short *)CAN_AM17H) +#define pCAN_AM18L ((volatile unsigned short *)CAN_AM18L) +#define pCAN_AM18H ((volatile unsigned short *)CAN_AM18H) +#define pCAN_AM19L ((volatile unsigned short *)CAN_AM19L) +#define pCAN_AM19H ((volatile unsigned short *)CAN_AM19H) +#define pCAN_AM20L ((volatile unsigned short *)CAN_AM20L) +#define pCAN_AM20H ((volatile unsigned short *)CAN_AM20H) +#define pCAN_AM21L ((volatile unsigned short *)CAN_AM21L) +#define pCAN_AM21H ((volatile unsigned short *)CAN_AM21H) +#define pCAN_AM22L ((volatile unsigned short *)CAN_AM22L) +#define pCAN_AM22H ((volatile unsigned short *)CAN_AM22H) +#define pCAN_AM23L ((volatile unsigned short *)CAN_AM23L) +#define pCAN_AM23H ((volatile unsigned short *)CAN_AM23H) +#define pCAN_AM24L ((volatile unsigned short *)CAN_AM24L) +#define pCAN_AM24H ((volatile unsigned short *)CAN_AM24H) +#define pCAN_AM25L ((volatile unsigned short *)CAN_AM25L) +#define pCAN_AM25H ((volatile unsigned short *)CAN_AM25H) +#define pCAN_AM26L ((volatile unsigned short *)CAN_AM26L) +#define pCAN_AM26H ((volatile unsigned short *)CAN_AM26H) +#define pCAN_AM27L ((volatile unsigned short *)CAN_AM27L) +#define pCAN_AM27H ((volatile unsigned short *)CAN_AM27H) +#define pCAN_AM28L ((volatile unsigned short *)CAN_AM28L) +#define pCAN_AM28H ((volatile unsigned short *)CAN_AM28H) +#define pCAN_AM29L ((volatile unsigned short *)CAN_AM29L) +#define pCAN_AM29H ((volatile unsigned short *)CAN_AM29H) +#define pCAN_AM30L ((volatile unsigned short *)CAN_AM30L) +#define pCAN_AM30H ((volatile unsigned short *)CAN_AM30H) +#define pCAN_AM31L ((volatile unsigned short *)CAN_AM31L) +#define pCAN_AM31H ((volatile unsigned short *)CAN_AM31H) + +/* CAN Acceptance Mask Area Macros */ +#define pCAN_AM_L(x) ((volatile unsigned short *)CAN_AM_L(x)) +#define pCAN_AM_H(x) ((volatile unsigned short *)CAN_AM_H(x)) + +/* Mailbox Registers */ +#define pCAN_MB00_ID1 ((volatile unsigned short *)CAN_MB00_ID1) +#define pCAN_MB00_ID0 ((volatile unsigned short *)CAN_MB00_ID0) +#define pCAN_MB00_TIMESTAMP ((volatile unsigned short *)CAN_MB00_TIMESTAMP) +#define pCAN_MB00_LENGTH ((volatile unsigned short *)CAN_MB00_LENGTH) +#define pCAN_MB00_DATA3 ((volatile unsigned short *)CAN_MB00_DATA3) +#define pCAN_MB00_DATA2 ((volatile unsigned short *)CAN_MB00_DATA2) +#define pCAN_MB00_DATA1 ((volatile unsigned short *)CAN_MB00_DATA1) +#define pCAN_MB00_DATA0 ((volatile unsigned short *)CAN_MB00_DATA0) + +#define pCAN_MB01_ID1 ((volatile unsigned short *)CAN_MB01_ID1) +#define pCAN_MB01_ID0 ((volatile unsigned short *)CAN_MB01_ID0) +#define pCAN_MB01_TIMESTAMP ((volatile unsigned short *)CAN_MB01_TIMESTAMP) +#define pCAN_MB01_LENGTH ((volatile unsigned short *)CAN_MB01_LENGTH) +#define pCAN_MB01_DATA3 ((volatile unsigned short *)CAN_MB01_DATA3) +#define pCAN_MB01_DATA2 ((volatile unsigned short *)CAN_MB01_DATA2) +#define pCAN_MB01_DATA1 ((volatile unsigned short *)CAN_MB01_DATA1) +#define pCAN_MB01_DATA0 ((volatile unsigned short *)CAN_MB01_DATA0) + +#define pCAN_MB02_ID1 ((volatile unsigned short *)CAN_MB02_ID1) +#define pCAN_MB02_ID0 ((volatile unsigned short *)CAN_MB02_ID0) +#define pCAN_MB02_TIMESTAMP ((volatile unsigned short *)CAN_MB02_TIMESTAMP) +#define pCAN_MB02_LENGTH ((volatile unsigned short *)CAN_MB02_LENGTH) +#define pCAN_MB02_DATA3 ((volatile unsigned short *)CAN_MB02_DATA3) +#define pCAN_MB02_DATA2 ((volatile unsigned short *)CAN_MB02_DATA2) +#define pCAN_MB02_DATA1 ((volatile unsigned short *)CAN_MB02_DATA1) +#define pCAN_MB02_DATA0 ((volatile unsigned short *)CAN_MB02_DATA0) + +#define pCAN_MB03_ID1 ((volatile unsigned short *)CAN_MB03_ID1) +#define pCAN_MB03_ID0 ((volatile unsigned short *)CAN_MB03_ID0) +#define pCAN_MB03_TIMESTAMP ((volatile unsigned short *)CAN_MB03_TIMESTAMP) +#define pCAN_MB03_LENGTH ((volatile unsigned short *)CAN_MB03_LENGTH) +#define pCAN_MB03_DATA3 ((volatile unsigned short *)CAN_MB03_DATA3) +#define pCAN_MB03_DATA2 ((volatile unsigned short *)CAN_MB03_DATA2) +#define pCAN_MB03_DATA1 ((volatile unsigned short *)CAN_MB03_DATA1) +#define pCAN_MB03_DATA0 ((volatile unsigned short *)CAN_MB03_DATA0) + +#define pCAN_MB04_ID1 ((volatile unsigned short *)CAN_MB04_ID1) +#define pCAN_MB04_ID0 ((volatile unsigned short *)CAN_MB04_ID0) +#define pCAN_MB04_TIMESTAMP ((volatile unsigned short *)CAN_MB04_TIMESTAMP) +#define pCAN_MB04_LENGTH ((volatile unsigned short *)CAN_MB04_LENGTH) +#define pCAN_MB04_DATA3 ((volatile unsigned short *)CAN_MB04_DATA3) +#define pCAN_MB04_DATA2 ((volatile unsigned short *)CAN_MB04_DATA2) +#define pCAN_MB04_DATA1 ((volatile unsigned short *)CAN_MB04_DATA1) +#define pCAN_MB04_DATA0 ((volatile unsigned short *)CAN_MB04_DATA0) + +#define pCAN_MB05_ID1 ((volatile unsigned short *)CAN_MB05_ID1) +#define pCAN_MB05_ID0 ((volatile unsigned short *)CAN_MB05_ID0) +#define pCAN_MB05_TIMESTAMP ((volatile unsigned short *)CAN_MB05_TIMESTAMP) +#define pCAN_MB05_LENGTH ((volatile unsigned short *)CAN_MB05_LENGTH) +#define pCAN_MB05_DATA3 ((volatile unsigned short *)CAN_MB05_DATA3) +#define pCAN_MB05_DATA2 ((volatile unsigned short *)CAN_MB05_DATA2) +#define pCAN_MB05_DATA1 ((volatile unsigned short *)CAN_MB05_DATA1) +#define pCAN_MB05_DATA0 ((volatile unsigned short *)CAN_MB05_DATA0) + +#define pCAN_MB06_ID1 ((volatile unsigned short *)CAN_MB06_ID1) +#define pCAN_MB06_ID0 ((volatile unsigned short *)CAN_MB06_ID0) +#define pCAN_MB06_TIMESTAMP ((volatile unsigned short *)CAN_MB06_TIMESTAMP) +#define pCAN_MB06_LENGTH ((volatile unsigned short *)CAN_MB06_LENGTH) +#define pCAN_MB06_DATA3 ((volatile unsigned short *)CAN_MB06_DATA3) +#define pCAN_MB06_DATA2 ((volatile unsigned short *)CAN_MB06_DATA2) +#define pCAN_MB06_DATA1 ((volatile unsigned short *)CAN_MB06_DATA1) +#define pCAN_MB06_DATA0 ((volatile unsigned short *)CAN_MB06_DATA0) + +#define pCAN_MB07_ID1 ((volatile unsigned short *)CAN_MB07_ID1) +#define pCAN_MB07_ID0 ((volatile unsigned short *)CAN_MB07_ID0) +#define pCAN_MB07_TIMESTAMP ((volatile unsigned short *)CAN_MB07_TIMESTAMP) +#define pCAN_MB07_LENGTH ((volatile unsigned short *)CAN_MB07_LENGTH) +#define pCAN_MB07_DATA3 ((volatile unsigned short *)CAN_MB07_DATA3) +#define pCAN_MB07_DATA2 ((volatile unsigned short *)CAN_MB07_DATA2) +#define pCAN_MB07_DATA1 ((volatile unsigned short *)CAN_MB07_DATA1) +#define pCAN_MB07_DATA0 ((volatile unsigned short *)CAN_MB07_DATA0) + +#define pCAN_MB08_ID1 ((volatile unsigned short *)CAN_MB08_ID1) +#define pCAN_MB08_ID0 ((volatile unsigned short *)CAN_MB08_ID0) +#define pCAN_MB08_TIMESTAMP ((volatile unsigned short *)CAN_MB08_TIMESTAMP) +#define pCAN_MB08_LENGTH ((volatile unsigned short *)CAN_MB08_LENGTH) +#define pCAN_MB08_DATA3 ((volatile unsigned short *)CAN_MB08_DATA3) +#define pCAN_MB08_DATA2 ((volatile unsigned short *)CAN_MB08_DATA2) +#define pCAN_MB08_DATA1 ((volatile unsigned short *)CAN_MB08_DATA1) +#define pCAN_MB08_DATA0 ((volatile unsigned short *)CAN_MB08_DATA0) + +#define pCAN_MB09_ID1 ((volatile unsigned short *)CAN_MB09_ID1) +#define pCAN_MB09_ID0 ((volatile unsigned short *)CAN_MB09_ID0) +#define pCAN_MB09_TIMESTAMP ((volatile unsigned short *)CAN_MB09_TIMESTAMP) +#define pCAN_MB09_LENGTH ((volatile unsigned short *)CAN_MB09_LENGTH) +#define pCAN_MB09_DATA3 ((volatile unsigned short *)CAN_MB09_DATA3) +#define pCAN_MB09_DATA2 ((volatile unsigned short *)CAN_MB09_DATA2) +#define pCAN_MB09_DATA1 ((volatile unsigned short *)CAN_MB09_DATA1) +#define pCAN_MB09_DATA0 ((volatile unsigned short *)CAN_MB09_DATA0) + +#define pCAN_MB10_ID1 ((volatile unsigned short *)CAN_MB10_ID1) +#define pCAN_MB10_ID0 ((volatile unsigned short *)CAN_MB10_ID0) +#define pCAN_MB10_TIMESTAMP ((volatile unsigned short *)CAN_MB10_TIMESTAMP) +#define pCAN_MB10_LENGTH ((volatile unsigned short *)CAN_MB10_LENGTH) +#define pCAN_MB10_DATA3 ((volatile unsigned short *)CAN_MB10_DATA3) +#define pCAN_MB10_DATA2 ((volatile unsigned short *)CAN_MB10_DATA2) +#define pCAN_MB10_DATA1 ((volatile unsigned short *)CAN_MB10_DATA1) +#define pCAN_MB10_DATA0 ((volatile unsigned short *)CAN_MB10_DATA0) + +#define pCAN_MB11_ID1 ((volatile unsigned short *)CAN_MB11_ID1) +#define pCAN_MB11_ID0 ((volatile unsigned short *)CAN_MB11_ID0) +#define pCAN_MB11_TIMESTAMP ((volatile unsigned short *)CAN_MB11_TIMESTAMP) +#define pCAN_MB11_LENGTH ((volatile unsigned short *)CAN_MB11_LENGTH) +#define pCAN_MB11_DATA3 ((volatile unsigned short *)CAN_MB11_DATA3) +#define pCAN_MB11_DATA2 ((volatile unsigned short *)CAN_MB11_DATA2) +#define pCAN_MB11_DATA1 ((volatile unsigned short *)CAN_MB11_DATA1) +#define pCAN_MB11_DATA0 ((volatile unsigned short *)CAN_MB11_DATA0) + +#define pCAN_MB12_ID1 ((volatile unsigned short *)CAN_MB12_ID1) +#define pCAN_MB12_ID0 ((volatile unsigned short *)CAN_MB12_ID0) +#define pCAN_MB12_TIMESTAMP ((volatile unsigned short *)CAN_MB12_TIMESTAMP) +#define pCAN_MB12_LENGTH ((volatile unsigned short *)CAN_MB12_LENGTH) +#define pCAN_MB12_DATA3 ((volatile unsigned short *)CAN_MB12_DATA3) +#define pCAN_MB12_DATA2 ((volatile unsigned short *)CAN_MB12_DATA2) +#define pCAN_MB12_DATA1 ((volatile unsigned short *)CAN_MB12_DATA1) +#define pCAN_MB12_DATA0 ((volatile unsigned short *)CAN_MB12_DATA0) + +#define pCAN_MB13_ID1 ((volatile unsigned short *)CAN_MB13_ID1) +#define pCAN_MB13_ID0 ((volatile unsigned short *)CAN_MB13_ID0) +#define pCAN_MB13_TIMESTAMP ((volatile unsigned short *)CAN_MB13_TIMESTAMP) +#define pCAN_MB13_LENGTH ((volatile unsigned short *)CAN_MB13_LENGTH) +#define pCAN_MB13_DATA3 ((volatile unsigned short *)CAN_MB13_DATA3) +#define pCAN_MB13_DATA2 ((volatile unsigned short *)CAN_MB13_DATA2) +#define pCAN_MB13_DATA1 ((volatile unsigned short *)CAN_MB13_DATA1) +#define pCAN_MB13_DATA0 ((volatile unsigned short *)CAN_MB13_DATA0) + +#define pCAN_MB14_ID1 ((volatile unsigned short *)CAN_MB14_ID1) +#define pCAN_MB14_ID0 ((volatile unsigned short *)CAN_MB14_ID0) +#define pCAN_MB14_TIMESTAMP ((volatile unsigned short *)CAN_MB14_TIMESTAMP) +#define pCAN_MB14_LENGTH ((volatile unsigned short *)CAN_MB14_LENGTH) +#define pCAN_MB14_DATA3 ((volatile unsigned short *)CAN_MB14_DATA3) +#define pCAN_MB14_DATA2 ((volatile unsigned short *)CAN_MB14_DATA2) +#define pCAN_MB14_DATA1 ((volatile unsigned short *)CAN_MB14_DATA1) +#define pCAN_MB14_DATA0 ((volatile unsigned short *)CAN_MB14_DATA0) + +#define pCAN_MB15_ID1 ((volatile unsigned short *)CAN_MB15_ID1) +#define pCAN_MB15_ID0 ((volatile unsigned short *)CAN_MB15_ID0) +#define pCAN_MB15_TIMESTAMP ((volatile unsigned short *)CAN_MB15_TIMESTAMP) +#define pCAN_MB15_LENGTH ((volatile unsigned short *)CAN_MB15_LENGTH) +#define pCAN_MB15_DATA3 ((volatile unsigned short *)CAN_MB15_DATA3) +#define pCAN_MB15_DATA2 ((volatile unsigned short *)CAN_MB15_DATA2) +#define pCAN_MB15_DATA1 ((volatile unsigned short *)CAN_MB15_DATA1) +#define pCAN_MB15_DATA0 ((volatile unsigned short *)CAN_MB15_DATA0) + +#define pCAN_MB16_ID1 ((volatile unsigned short *)CAN_MB16_ID1) +#define pCAN_MB16_ID0 ((volatile unsigned short *)CAN_MB16_ID0) +#define pCAN_MB16_TIMESTAMP ((volatile unsigned short *)CAN_MB16_TIMESTAMP) +#define pCAN_MB16_LENGTH ((volatile unsigned short *)CAN_MB16_LENGTH) +#define pCAN_MB16_DATA3 ((volatile unsigned short *)CAN_MB16_DATA3) +#define pCAN_MB16_DATA2 ((volatile unsigned short *)CAN_MB16_DATA2) +#define pCAN_MB16_DATA1 ((volatile unsigned short *)CAN_MB16_DATA1) +#define pCAN_MB16_DATA0 ((volatile unsigned short *)CAN_MB16_DATA0) + +#define pCAN_MB17_ID1 ((volatile unsigned short *)CAN_MB17_ID1) +#define pCAN_MB17_ID0 ((volatile unsigned short *)CAN_MB17_ID0) +#define pCAN_MB17_TIMESTAMP ((volatile unsigned short *)CAN_MB17_TIMESTAMP) +#define pCAN_MB17_LENGTH ((volatile unsigned short *)CAN_MB17_LENGTH) +#define pCAN_MB17_DATA3 ((volatile unsigned short *)CAN_MB17_DATA3) +#define pCAN_MB17_DATA2 ((volatile unsigned short *)CAN_MB17_DATA2) +#define pCAN_MB17_DATA1 ((volatile unsigned short *)CAN_MB17_DATA1) +#define pCAN_MB17_DATA0 ((volatile unsigned short *)CAN_MB17_DATA0) + +#define pCAN_MB18_ID1 ((volatile unsigned short *)CAN_MB18_ID1) +#define pCAN_MB18_ID0 ((volatile unsigned short *)CAN_MB18_ID0) +#define pCAN_MB18_TIMESTAMP ((volatile unsigned short *)CAN_MB18_TIMESTAMP) +#define pCAN_MB18_LENGTH ((volatile unsigned short *)CAN_MB18_LENGTH) +#define pCAN_MB18_DATA3 ((volatile unsigned short *)CAN_MB18_DATA3) +#define pCAN_MB18_DATA2 ((volatile unsigned short *)CAN_MB18_DATA2) +#define pCAN_MB18_DATA1 ((volatile unsigned short *)CAN_MB18_DATA1) +#define pCAN_MB18_DATA0 ((volatile unsigned short *)CAN_MB18_DATA0) + +#define pCAN_MB19_ID1 ((volatile unsigned short *)CAN_MB19_ID1) +#define pCAN_MB19_ID0 ((volatile unsigned short *)CAN_MB19_ID0) +#define pCAN_MB19_TIMESTAMP ((volatile unsigned short *)CAN_MB19_TIMESTAMP) +#define pCAN_MB19_LENGTH ((volatile unsigned short *)CAN_MB19_LENGTH) +#define pCAN_MB19_DATA3 ((volatile unsigned short *)CAN_MB19_DATA3) +#define pCAN_MB19_DATA2 ((volatile unsigned short *)CAN_MB19_DATA2) +#define pCAN_MB19_DATA1 ((volatile unsigned short *)CAN_MB19_DATA1) +#define pCAN_MB19_DATA0 ((volatile unsigned short *)CAN_MB19_DATA0) + +#define pCAN_MB20_ID1 ((volatile unsigned short *)CAN_MB20_ID1) +#define pCAN_MB20_ID0 ((volatile unsigned short *)CAN_MB20_ID0) +#define pCAN_MB20_TIMESTAMP ((volatile unsigned short *)CAN_MB20_TIMESTAMP) +#define pCAN_MB20_LENGTH ((volatile unsigned short *)CAN_MB20_LENGTH) +#define pCAN_MB20_DATA3 ((volatile unsigned short *)CAN_MB20_DATA3) +#define pCAN_MB20_DATA2 ((volatile unsigned short *)CAN_MB20_DATA2) +#define pCAN_MB20_DATA1 ((volatile unsigned short *)CAN_MB20_DATA1) +#define pCAN_MB20_DATA0 ((volatile unsigned short *)CAN_MB20_DATA0) + +#define pCAN_MB21_ID1 ((volatile unsigned short *)CAN_MB21_ID1) +#define pCAN_MB21_ID0 ((volatile unsigned short *)CAN_MB21_ID0) +#define pCAN_MB21_TIMESTAMP ((volatile unsigned short *)CAN_MB21_TIMESTAMP) +#define pCAN_MB21_LENGTH ((volatile unsigned short *)CAN_MB21_LENGTH) +#define pCAN_MB21_DATA3 ((volatile unsigned short *)CAN_MB21_DATA3) +#define pCAN_MB21_DATA2 ((volatile unsigned short *)CAN_MB21_DATA2) +#define pCAN_MB21_DATA1 ((volatile unsigned short *)CAN_MB21_DATA1) +#define pCAN_MB21_DATA0 ((volatile unsigned short *)CAN_MB21_DATA0) + +#define pCAN_MB22_ID1 ((volatile unsigned short *)CAN_MB22_ID1) +#define pCAN_MB22_ID0 ((volatile unsigned short *)CAN_MB22_ID0) +#define pCAN_MB22_TIMESTAMP ((volatile unsigned short *)CAN_MB22_TIMESTAMP) +#define pCAN_MB22_LENGTH ((volatile unsigned short *)CAN_MB22_LENGTH) +#define pCAN_MB22_DATA3 ((volatile unsigned short *)CAN_MB22_DATA3) +#define pCAN_MB22_DATA2 ((volatile unsigned short *)CAN_MB22_DATA2) +#define pCAN_MB22_DATA1 ((volatile unsigned short *)CAN_MB22_DATA1) +#define pCAN_MB22_DATA0 ((volatile unsigned short *)CAN_MB22_DATA0) + +#define pCAN_MB23_ID1 ((volatile unsigned short *)CAN_MB23_ID1) +#define pCAN_MB23_ID0 ((volatile unsigned short *)CAN_MB23_ID0) +#define pCAN_MB23_TIMESTAMP ((volatile unsigned short *)CAN_MB23_TIMESTAMP) +#define pCAN_MB23_LENGTH ((volatile unsigned short *)CAN_MB23_LENGTH) +#define pCAN_MB23_DATA3 ((volatile unsigned short *)CAN_MB23_DATA3) +#define pCAN_MB23_DATA2 ((volatile unsigned short *)CAN_MB23_DATA2) +#define pCAN_MB23_DATA1 ((volatile unsigned short *)CAN_MB23_DATA1) +#define pCAN_MB23_DATA0 ((volatile unsigned short *)CAN_MB23_DATA0) + +#define pCAN_MB24_ID1 ((volatile unsigned short *)CAN_MB24_ID1) +#define pCAN_MB24_ID0 ((volatile unsigned short *)CAN_MB24_ID0) +#define pCAN_MB24_TIMESTAMP ((volatile unsigned short *)CAN_MB24_TIMESTAMP) +#define pCAN_MB24_LENGTH ((volatile unsigned short *)CAN_MB24_LENGTH) +#define pCAN_MB24_DATA3 ((volatile unsigned short *)CAN_MB24_DATA3) +#define pCAN_MB24_DATA2 ((volatile unsigned short *)CAN_MB24_DATA2) +#define pCAN_MB24_DATA1 ((volatile unsigned short *)CAN_MB24_DATA1) +#define pCAN_MB24_DATA0 ((volatile unsigned short *)CAN_MB24_DATA0) + +#define pCAN_MB25_ID1 ((volatile unsigned short *)CAN_MB25_ID1) +#define pCAN_MB25_ID0 ((volatile unsigned short *)CAN_MB25_ID0) +#define pCAN_MB25_TIMESTAMP ((volatile unsigned short *)CAN_MB25_TIMESTAMP) +#define pCAN_MB25_LENGTH ((volatile unsigned short *)CAN_MB25_LENGTH) +#define pCAN_MB25_DATA3 ((volatile unsigned short *)CAN_MB25_DATA3) +#define pCAN_MB25_DATA2 ((volatile unsigned short *)CAN_MB25_DATA2) +#define pCAN_MB25_DATA1 ((volatile unsigned short *)CAN_MB25_DATA1) +#define pCAN_MB25_DATA0 ((volatile unsigned short *)CAN_MB25_DATA0) + +#define pCAN_MB26_ID1 ((volatile unsigned short *)CAN_MB26_ID1) +#define pCAN_MB26_ID0 ((volatile unsigned short *)CAN_MB26_ID0) +#define pCAN_MB26_TIMESTAMP ((volatile unsigned short *)CAN_MB26_TIMESTAMP) +#define pCAN_MB26_LENGTH ((volatile unsigned short *)CAN_MB26_LENGTH) +#define pCAN_MB26_DATA3 ((volatile unsigned short *)CAN_MB26_DATA3) +#define pCAN_MB26_DATA2 ((volatile unsigned short *)CAN_MB26_DATA2) +#define pCAN_MB26_DATA1 ((volatile unsigned short *)CAN_MB26_DATA1) +#define pCAN_MB26_DATA0 ((volatile unsigned short *)CAN_MB26_DATA0) + +#define pCAN_MB27_ID1 ((volatile unsigned short *)CAN_MB27_ID1) +#define pCAN_MB27_ID0 ((volatile unsigned short *)CAN_MB27_ID0) +#define pCAN_MB27_TIMESTAMP ((volatile unsigned short *)CAN_MB27_TIMESTAMP) +#define pCAN_MB27_LENGTH ((volatile unsigned short *)CAN_MB27_LENGTH) +#define pCAN_MB27_DATA3 ((volatile unsigned short *)CAN_MB27_DATA3) +#define pCAN_MB27_DATA2 ((volatile unsigned short *)CAN_MB27_DATA2) +#define pCAN_MB27_DATA1 ((volatile unsigned short *)CAN_MB27_DATA1) +#define pCAN_MB27_DATA0 ((volatile unsigned short *)CAN_MB27_DATA0) + +#define pCAN_MB28_ID1 ((volatile unsigned short *)CAN_MB28_ID1) +#define pCAN_MB28_ID0 ((volatile unsigned short *)CAN_MB28_ID0) +#define pCAN_MB28_TIMESTAMP ((volatile unsigned short *)CAN_MB28_TIMESTAMP) +#define pCAN_MB28_LENGTH ((volatile unsigned short *)CAN_MB28_LENGTH) +#define pCAN_MB28_DATA3 ((volatile unsigned short *)CAN_MB28_DATA3) +#define pCAN_MB28_DATA2 ((volatile unsigned short *)CAN_MB28_DATA2) +#define pCAN_MB28_DATA1 ((volatile unsigned short *)CAN_MB28_DATA1) +#define pCAN_MB28_DATA0 ((volatile unsigned short *)CAN_MB28_DATA0) + +#define pCAN_MB29_ID1 ((volatile unsigned short *)CAN_MB29_ID1) +#define pCAN_MB29_ID0 ((volatile unsigned short *)CAN_MB29_ID0) +#define pCAN_MB29_TIMESTAMP ((volatile unsigned short *)CAN_MB29_TIMESTAMP) +#define pCAN_MB29_LENGTH ((volatile unsigned short *)CAN_MB29_LENGTH) +#define pCAN_MB29_DATA3 ((volatile unsigned short *)CAN_MB29_DATA3) +#define pCAN_MB29_DATA2 ((volatile unsigned short *)CAN_MB29_DATA2) +#define pCAN_MB29_DATA1 ((volatile unsigned short *)CAN_MB29_DATA1) +#define pCAN_MB29_DATA0 ((volatile unsigned short *)CAN_MB29_DATA0) + +#define pCAN_MB30_ID1 ((volatile unsigned short *)CAN_MB30_ID1) +#define pCAN_MB30_ID0 ((volatile unsigned short *)CAN_MB30_ID0) +#define pCAN_MB30_TIMESTAMP ((volatile unsigned short *)CAN_MB30_TIMESTAMP) +#define pCAN_MB30_LENGTH ((volatile unsigned short *)CAN_MB30_LENGTH) +#define pCAN_MB30_DATA3 ((volatile unsigned short *)CAN_MB30_DATA3) +#define pCAN_MB30_DATA2 ((volatile unsigned short *)CAN_MB30_DATA2) +#define pCAN_MB30_DATA1 ((volatile unsigned short *)CAN_MB30_DATA1) +#define pCAN_MB30_DATA0 ((volatile unsigned short *)CAN_MB30_DATA0) + +#define pCAN_MB31_ID1 ((volatile unsigned short *)CAN_MB31_ID1) +#define pCAN_MB31_ID0 ((volatile unsigned short *)CAN_MB31_ID0) +#define pCAN_MB31_TIMESTAMP ((volatile unsigned short *)CAN_MB31_TIMESTAMP) +#define pCAN_MB31_LENGTH ((volatile unsigned short *)CAN_MB31_LENGTH) +#define pCAN_MB31_DATA3 ((volatile unsigned short *)CAN_MB31_DATA3) +#define pCAN_MB31_DATA2 ((volatile unsigned short *)CAN_MB31_DATA2) +#define pCAN_MB31_DATA1 ((volatile unsigned short *)CAN_MB31_DATA1) +#define pCAN_MB31_DATA0 ((volatile unsigned short *)CAN_MB31_DATA0) + +/* CAN Mailbox Area Macros */ +#define pCAN_MB_ID1(x) ((volatile unsigned short *)CAN_MB_ID1(x)) +#define pCAN_MB_ID0(x) ((volatile unsigned short *)CAN_MB_ID0(x)) +#define pCAN_MB_TIMESTAMP(x) ((volatile unsigned short *)CAN_MB_TIMESTAMP(x)) +#define pCAN_MB_LENGTH(x) ((volatile unsigned short *)CAN_MB_LENGTH(x)) +#define pCAN_MB_DATA3(x) ((volatile unsigned short *)CAN_MB_DATA3(x)) +#define pCAN_MB_DATA2(x) ((volatile unsigned short *)CAN_MB_DATA2(x)) +#define pCAN_MB_DATA1(x) ((volatile unsigned short *)CAN_MB_DATA1(x)) +#define pCAN_MB_DATA0(x) ((volatile unsigned short *)CAN_MB_DATA0(x)) + +/* Pin Control Registers (0xFFC03200 - 0xFFC032FF) */ +#define pPORTF_FER ((volatile unsigned short *)PORTF_FER) +#define pPORTG_FER ((volatile unsigned short *)PORTG_FER) +#define pPORTH_FER ((volatile unsigned short *)PORTH_FER) +#define pPORT_MUX ((volatile unsigned short *)PORT_MUX) + +#define PORTF_UART0_TX 0x0001 +#define PORTF_UART0_RX 0x0002 + +#define PORT_MUX_PFDE 0x0040 /* 0: Enable UART0 RX, UART0 TX; 1: Enable DMAR0, DMAr1 */ + +/* Handshake MDMA Registers (0xFFC03300 - 0xFFC033FF) */ +#define pHMDMA0_CONTROL ((volatile unsigned short *)HMDMA0_CONTROL) +#define pHMDMA0_ECINIT ((volatile unsigned short *)HMDMA0_ECINIT) +#define pHMDMA0_BCINIT ((volatile unsigned short *)HMDMA0_BCINIT) +#define pHMDMA0_ECURGENT ((volatile unsigned short *)HMDMA0_ECURGENT) +#define pHMDMA0_ECOVERFLOW ((volatile unsigned short *)HMDMA0_ECOVERFLOW) +#define pHMDMA0_ECOUNT ((volatile unsigned short *)HMDMA0_ECOUNT) +#define pHMDMA0_BCOUNT ((volatile unsigned short *)HMDMA0_BCOUNT) + +#define pHMDMA1_CONTROL ((volatile unsigned short *)HMDMA1_CONTROL) +#define pHMDMA1_ECINIT ((volatile unsigned short *)HMDMA1_ECINIT) +#define pHMDMA1_BCINIT ((volatile unsigned short *)HMDMA1_BCINIT) +#define pHMDMA1_ECURGENT ((volatile unsigned short *)HMDMA1_ECURGENT) +#define pHMDMA1_ECOVERFLOW ((volatile unsigned short *)HMDMA1_ECOVERFLOW) +#define pHMDMA1_ECOUNT ((volatile unsigned short *)HMDMA1_ECOUNT) +#define pHMDMA1_BCOUNT ((volatile unsigned short *)HMDMA1_BCOUNT) + +#endif /* _CDEF_BF534_H */ diff --git a/include/asm-blackfin/arch-bf537/cdefBF537.h b/include/asm-blackfin/arch-bf537/cdefBF537.h new file mode 100644 index 0000000..3de1d93 --- /dev/null +++ b/include/asm-blackfin/arch-bf537/cdefBF537.h @@ -0,0 +1,186 @@ +/* + * Copyright (C) 2004 Analog Devices Inc., All Rights Reserved. + * + *********************************************************************************** + * + * This include file contains a list of macro "defines" to enable the programmer + * to use symbolic names for register-access. + * + * ---------------------------- + * revision 0.1 + * date: 2004/03/01 21:23:01; author: joeb + * Initial revision + * + * ---------------------------- + * revision 0.2 + * date: 2004/05/15 16:30:00; author: joeb + * comments: removed I2C/IIC references to TWI, changed GPIO sections + * + * ---------------------------- + * revision 0.3 + * date: 2004/06/08 12:25:00; author: joeb + * comments: renamed some TWI and GPIO registers + * + * ---------------------------- + * revision 0.4 + * date: 2004/06/09 14:25:00; author: joeb + * comments: changed Timer status register to 32-bit, renamed EMAC count registers + * + * ---------------------------- + * revision 0.5 + * date: 2004/08/10 10:25:00; author: joeb + * comments: Renamed EMAC wake-up registers, changed bit-names in EMAC registers + * + * ---------------------------- + * revision 0.6 + * date: 2004/08/17 16:25:00; author: joeb + * comments: Renamed TWI_INT_ENABLE to TWI_INT_MASK + * + * ---------------------------- + * revision 0.7 + * date: 2004/08/18 13:21:00; author: joeb + * comments: Renamed GPIO registers to remove _D, _S, _C, _T suffixes + * + * ---------------------------- + * revision 0.8 + * date: 2004/08/20 10:27:00; author: joeb + * comments: Renamed External DMA to Handshake DMA + * + * ---------------------------- + * revision 0.9 + * date: 2004/08/23 13:42:00; author: joeb + * comments: Renamed Handshake DMA Register Set + * + * ---------------------------- + * revision 0.10 + * date: 2004/10/28 15:40:00; author: joeb + * comments: Shortened EMAC Count Register Names + * + * ---------------------------- + * revision 0.11 + * date: 2004/12/13 11:05:00; author: joeb + * comments: Fixed address pointers - (volatile void **) to (void * volatile *) + * + * ---------------------------- + * revision 0.12 + * date: 2004/12/17 14:25:00; author: joeb + * comments: Replaced C++ Single-Line Comments w/C-standard Comments + * Changed EMAC EQ1024 TX/RX References to GE1024 + * + * ---------------------------- + * revision 0.13 + * date: 2005/01/05 10:50:00; author: joeb + * comments: Removed excess white space in CAN_AM section + * Added support for CAN Macros to Index AM and Mailbox Areas + * + * ---------------------------- + * revision 0.14 + * date: 2005/01/26 14:10:00; author: joeb + * comments: Fixed Typo In EMAC_RXC_PAUSE register + * + * ---------------------------- + * revision 0.15 + * date: 2005/01/27 14:41:00; author: joeb + * comments: Moved Common MMRs to cdefBF534.h + */ + +/* + * System MMR Register Map + */ + +#ifndef _CDEF_BF537_H +#define _CDEF_BF537_H + +/* Include MMRs Common to BF534 */ +#include <asm/arch-bf537/cdefBF534.h> + +/* Include all Core registers and bit definitions */ +#include <asm/arch-bf537/defBF537.h> + +/* Include Macro "Defines" For EMAC (Unique to BF536/BF537 */ +/* 10/100 Ethernet Controller (0xFFC03000 - 0xFFC031FF) */ +#define pEMAC_OPMODE ((volatile unsigned long *)EMAC_OPMODE) +#define pEMAC_ADDRLO ((volatile unsigned long *)EMAC_ADDRLO) +#define pEMAC_ADDRHI ((volatile unsigned long *)EMAC_ADDRHI) +#define pEMAC_HASHLO ((volatile unsigned long *)EMAC_HASHLO) +#define pEMAC_HASHHI ((volatile unsigned long *)EMAC_HASHHI) +#define pEMAC_STAADD ((volatile unsigned long *)EMAC_STAADD) +#define pEMAC_STADAT ((volatile unsigned long *)EMAC_STADAT) +#define pEMAC_FLC ((volatile unsigned long *)EMAC_FLC) +#define pEMAC_VLAN1 ((volatile unsigned long *)EMAC_VLAN1) +#define pEMAC_VLAN2 ((volatile unsigned long *)EMAC_VLAN2) +#define pEMAC_WKUP_CTL ((volatile unsigned long *)EMAC_WKUP_CTL) +#define pEMAC_WKUP_FFMSK0 ((volatile unsigned long *)EMAC_WKUP_FFMSK0) +#define pEMAC_WKUP_FFMSK1 ((volatile unsigned long *)EMAC_WKUP_FFMSK1) +#define pEMAC_WKUP_FFMSK2 ((volatile unsigned long *)EMAC_WKUP_FFMSK2) +#define pEMAC_WKUP_FFMSK3 ((volatile unsigned long *)EMAC_WKUP_FFMSK3) +#define pEMAC_WKUP_FFCMD ((volatile unsigned long *)EMAC_WKUP_FFCMD) +#define pEMAC_WKUP_FFOFF ((volatile unsigned long *)EMAC_WKUP_FFOFF) +#define pEMAC_WKUP_FFCRC0 ((volatile unsigned long *)EMAC_WKUP_FFCRC0) +#define pEMAC_WKUP_FFCRC1 ((volatile unsigned long *)EMAC_WKUP_FFCRC1) + +#define pEMAC_SYSCTL ((volatile unsigned long *)EMAC_SYSCTL) +#define pEMAC_SYSTAT ((volatile unsigned long *)EMAC_SYSTAT) +#define pEMAC_RX_STAT ((volatile unsigned long *)EMAC_RX_STAT) +#define pEMAC_RX_STKY ((volatile unsigned long *)EMAC_RX_STKY) +#define pEMAC_RX_IRQE ((volatile unsigned long *)EMAC_RX_IRQE) +#define pEMAC_TX_STAT ((volatile unsigned long *)EMAC_TX_STAT) +#define pEMAC_TX_STKY ((volatile unsigned long *)EMAC_TX_STKY) +#define pEMAC_TX_IRQE ((volatile unsigned long *)EMAC_TX_IRQE) + +#define pEMAC_MMC_CTL ((volatile unsigned long *)EMAC_MMC_CTL) +#define pEMAC_MMC_RIRQS ((volatile unsigned long *)EMAC_MMC_RIRQS) +#define pEMAC_MMC_RIRQE ((volatile unsigned long *)EMAC_MMC_RIRQE) +#define pEMAC_MMC_TIRQS ((volatile unsigned long *)EMAC_MMC_TIRQS) +#define pEMAC_MMC_TIRQE ((volatile unsigned long *)EMAC_MMC_TIRQE) + +#define pEMAC_RXC_OK ((volatile unsigned long *)EMAC_RXC_OK) +#define pEMAC_RXC_FCS ((volatile unsigned long *)EMAC_RXC_FCS) +#define pEMAC_RXC_ALIGN ((volatile unsigned long *)EMAC_RXC_ALIGN) +#define pEMAC_RXC_OCTET ((volatile unsigned long *)EMAC_RXC_OCTET) +#define pEMAC_RXC_DMAOVF ((volatile unsigned long *)EMAC_RXC_DMAOVF) +#define pEMAC_RXC_UNICST ((volatile unsigned long *)EMAC_RXC_UNICST) +#define pEMAC_RXC_MULTI ((volatile unsigned long *)EMAC_RXC_MULTI) +#define pEMAC_RXC_BROAD ((volatile unsigned long *)EMAC_RXC_BROAD) +#define pEMAC_RXC_LNERRI ((volatile unsigned long *)EMAC_RXC_LNERRI) +#define pEMAC_RXC_LNERRO ((volatile unsigned long *)EMAC_RXC_LNERRO) +#define pEMAC_RXC_LONG ((volatile unsigned long *)EMAC_RXC_LONG) +#define pEMAC_RXC_MACCTL ((volatile unsigned long *)EMAC_RXC_MACCTL) +#define pEMAC_RXC_OPCODE ((volatile unsigned long *)EMAC_RXC_OPCODE) +#define pEMAC_RXC_PAUSE ((volatile unsigned long *)EMAC_RXC_PAUSE) +#define pEMAC_RXC_ALLFRM ((volatile unsigned long *)EMAC_RXC_ALLFRM) +#define pEMAC_RXC_ALLOCT ((volatile unsigned long *)EMAC_RXC_ALLOCT) +#define pEMAC_RXC_TYPED ((volatile unsigned long *)EMAC_RXC_TYPED) +#define pEMAC_RXC_SHORT ((volatile unsigned long *)EMAC_RXC_SHORT) +#define pEMAC_RXC_EQ64 ((volatile unsigned long *)EMAC_RXC_EQ64) +#define pEMAC_RXC_LT128 ((volatile unsigned long *)EMAC_RXC_LT128) +#define pEMAC_RXC_LT256 ((volatile unsigned long *)EMAC_RXC_LT256) +#define pEMAC_RXC_LT512 ((volatile unsigned long *)EMAC_RXC_LT512) +#define pEMAC_RXC_LT1024 ((volatile unsigned long *)EMAC_RXC_LT1024) +#define pEMAC_RXC_GE1024 ((volatile unsigned long *)EMAC_RXC_GE1024) + +#define pEMAC_TXC_OK ((volatile unsigned long *)EMAC_TXC_OK) +#define pEMAC_TXC_1COL ((volatile unsigned long *)EMAC_TXC_1COL) +#define pEMAC_TXC_GT1COL ((volatile unsigned long *)EMAC_TXC_GT1COL) +#define pEMAC_TXC_OCTET ((volatile unsigned long *)EMAC_TXC_OCTET) +#define pEMAC_TXC_DEFER ((volatile unsigned long *)EMAC_TXC_DEFER) +#define pEMAC_TXC_LATECL ((volatile unsigned long *)EMAC_TXC_LATECL) +#define pEMAC_TXC_XS_COL ((volatile unsigned long *)EMAC_TXC_XS_COL) +#define pEMAC_TXC_DMAUND ((volatile unsigned long *)EMAC_TXC_DMAUND) +#define pEMAC_TXC_CRSERR ((volatile unsigned long *)EMAC_TXC_CRSERR) +#define pEMAC_TXC_UNICST ((volatile unsigned long *)EMAC_TXC_UNICST) +#define pEMAC_TXC_MULTI ((volatile unsigned long *)EMAC_TXC_MULTI) +#define pEMAC_TXC_BROAD ((volatile unsigned long *)EMAC_TXC_BROAD) +#define pEMAC_TXC_XS_DFR ((volatile unsigned long *)EMAC_TXC_XS_DFR) +#define pEMAC_TXC_MACCTL ((volatile unsigned long *)EMAC_TXC_MACCTL) +#define pEMAC_TXC_ALLFRM ((volatile unsigned long *)EMAC_TXC_ALLFRM) +#define pEMAC_TXC_ALLOCT ((volatile unsigned long *)EMAC_TXC_ALLOCT) +#define pEMAC_TXC_EQ64 ((volatile unsigned long *)EMAC_TXC_EQ64) +#define pEMAC_TXC_LT128 ((volatile unsigned long *)EMAC_TXC_LT128) +#define pEMAC_TXC_LT256 ((volatile unsigned long *)EMAC_TXC_LT256) +#define pEMAC_TXC_LT512 ((volatile unsigned long *)EMAC_TXC_LT512) +#define pEMAC_TXC_LT1024 ((volatile unsigned long *)EMAC_TXC_LT1024) +#define pEMAC_TXC_GE1024 ((volatile unsigned long *)EMAC_TXC_GE1024) +#define pEMAC_TXC_ABORT ((volatile unsigned long *)EMAC_TXC_ABORT) + +#endif /* _CDEF_BF537_H */ diff --git a/include/asm-blackfin/arch-bf537/cplbtab.h b/include/asm-blackfin/arch-bf537/cplbtab.h new file mode 100644 index 0000000..c5151bb --- /dev/null +++ b/include/asm-blackfin/arch-bf537/cplbtab.h @@ -0,0 +1,408 @@ +/*This file is subject to the terms and conditions of the GNU General Public + * License. + * + * Blackfin BF533/2.6 support : LG Soft India + * Updated : Ashutosh Singh / Jahid Khan : Rrap Software Pvt Ltd + * Updated : 1. SDRAM_KERNEL, SDRAM_DKENEL are added as initial cplb's + * shouldn't be victimized. cplbmgr.S search logic is corrected + * to findout the appropriate victim. + * 2. SDRAM_IGENERIC in dpdt_table is replaced with SDRAM_DGENERIC + * : LG Soft India + */ +#include <config.h> + +#ifndef __ARCH_BFINNOMMU_CPLBTAB_H +#define __ARCH_BFINNOMMU_CPLBTAB_H + +/* + * ICPLB TABLE + */ + +.data +/* This table is configurable */ + .align 4; + +/* Data Attibutes*/ + +#define SDRAM_IGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID) +#define SDRAM_IKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) +#define L1_IMEMORY (PAGE_SIZE_1MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) +#define SDRAM_INON_CHBL (PAGE_SIZE_4MB | CPLB_USER_RD | CPLB_VALID) + +/*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/ + +#define ANOMALY_05000158 0x200 +#ifdef CONFIG_BLKFIN_WB /*Write Back Policy */ +#define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) +#define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) +#define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_USER_WR | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158) +#define L1_DMEMORY (PAGE_SIZE_4KB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) +#define SDRAM_EBIU (PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158) + +#else /*Write Through */ +#define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) +#define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) +#define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158) +#define L1_DMEMORY (PAGE_SIZE_4KB | CPLB_L1_CHBL | CPLB_L1_AOW | CPLB_WT | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) +#define SDRAM_EBIU (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158) +#endif + +.align 4; +.global _ipdt_table _ipdt_table:.byte4 0x00000000; +.byte4(SDRAM_IKERNEL); /*SDRAM_Page0 */ +.byte4 0x00400000; +.byte4(SDRAM_IKERNEL); /*SDRAM_Page1 */ +.byte4 0x00800000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page2 */ +.byte4 0x00C00000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page3 */ +.byte4 0x01000000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page4 */ +.byte4 0x01400000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page5 */ +.byte4 0x01800000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page6 */ +.byte4 0x01C00000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page7 */ +.byte4 0x02000000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page8 */ +.byte4 0x02400000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page9 */ +.byte4 0x02800000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page10 */ +.byte4 0x02C00000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page11 */ +.byte4 0x03000000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page12 */ +.byte4 0x03400000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page13 */ +.byte4 0x03800000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page14 */ +.byte4 0x03C00000; +.byte4(SDRAM_IGENERIC); /*SDRAM_Page15 */ +.byte4 0x20000000; +.byte4(SDRAM_EBIU); /* Async Memory Bank 2 (Secnd) */ + +.byte4 0xffffffff; /* end of section - termination */ + +/* + * PAGE DESCRIPTOR TABLE + * + */ + +/* + * Till here we are discussing about the static memory management model. + * However, the operating envoronments commonly define more CPLB + * descriptors to cover the entire addressable memory than will fit into + * the available on-chip 16 CPLB MMRs. When this happens, the below table + * will be used which will hold all the potentially required CPLB descriptors + * + * This is how Page descriptor Table is implemented in uClinux/Blackfin. + */ +.global _dpdt_table _dpdt_table:.byte4 0x00000000; +.byte4(SDRAM_DKERNEL); /*SDRAM_Page0 */ +.byte4 0x00400000; +.byte4(SDRAM_DKERNEL); /*SDRAM_Page1 */ +.byte4 0x00800000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page2 */ +.byte4 0x00C00000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page3 */ +.byte4 0x01000000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page4 */ +.byte4 0x01400000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page5 */ +.byte4 0x01800000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page6 */ +.byte4 0x01C00000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page7 */ +.byte4 0x02000000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page8 */ +.byte4 0x02400000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page9 */ +.byte4 0x02800000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page10 */ +.byte4 0x02C00000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page11 */ +.byte4 0x03000000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page12 */ +.byte4 0x03400000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page13 */ +.byte4 0x03800000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page14 */ +.byte4 0x03C00000; +.byte4(SDRAM_DGENERIC); /*SDRAM_Page15 */ +.byte4 0x20000000; +.byte4(SDRAM_EBIU); /* Async Memory Bank 0 (Prim A) */ + +#if ((BFIN_CPU == ADSP_BF534) || (BFIN_CPU == ADSP_BF537)) +.byte4 0xFF800000; +.byte4(L1_DMEMORY); +.byte4 0xFF801000; +.byte4(L1_DMEMORY); +.byte4 0xFF802000; +.byte4(L1_DMEMORY); +.byte4 0xFF803000; +.byte4(L1_DMEMORY); +#endif +.byte4 0xFF804000; +.byte4(L1_DMEMORY); +.byte4 0xFF805000; +.byte4(L1_DMEMORY); +.byte4 0xFF806000; +.byte4(L1_DMEMORY); +.byte4 0xFF807000; +.byte4(L1_DMEMORY); +#if ((BFIN_CPU == ADSP_BF534) || (BFIN_CPU == ADSP_BF537)) +.byte4 0xFF900000; +.byte4(L1_DMEMORY); +.byte4 0xFF901000; +.byte4(L1_DMEMORY); +.byte4 0xFF902000; +.byte4(L1_DMEMORY); +.byte4 0xFF903000; +.byte4(L1_DMEMORY); +#endif +.byte4 0xFF904000; +.byte4(L1_DMEMORY); +.byte4 0xFF905000; +.byte4(L1_DMEMORY); +.byte4 0xFF906000; +.byte4(L1_DMEMORY); +.byte4 0xFF907000; +.byte4(L1_DMEMORY); + +.byte4 0xFFB00000; +.byte4(L1_DMEMORY); + +.byte4 0xffffffff; /*end of section - termination */ + +#ifdef CONFIG_CPLB_INFO +.global _ipdt_swapcount_table; /* swapin count first, then swapout count */ +_ipdt_swapcount_table: +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 10 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 20 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 30 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 40 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 50 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 60 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 70 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 80 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 90 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 100 */ + +.global _dpdt_swapcount_table; /* swapin count first, then swapout count */ +_dpdt_swapcount_table: +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 10 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 20 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 30 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 40 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 50 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 60 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 70 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 80 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 80 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 100 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 110 */ +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; +.byte4 0x00000000; /* 120 */ + +#endif + +#endif /*__ARCH_BFINNOMMU_CPLBTAB_H*/ diff --git a/include/asm-blackfin/arch-bf537/defBF534.h b/include/asm-blackfin/arch-bf537/defBF534.h new file mode 100644 index 0000000..c603d44 --- /dev/null +++ b/include/asm-blackfin/arch-bf537/defBF534.h @@ -0,0 +1,2627 @@ +/* + * Copyright (C) 2004 Analog Devices Inc., All Rights Reserved. + * + *********************************************************************************** + * + * This include file contains a list of macro "defines" to enable the programmer + * to use symbolic names for register-access and bit-manipulation. + * + * ---------------------------- + * revision 0.1 + * date: 2004/03/01 21:23:01; author: joeb + * Initial revision + * + */ +#ifndef _DEF_BF534_H +#define _DEF_BF534_H + +/* Include all Core registers and bit definitions */ +#include <asm/arch-common/def_LPBlackfin.h> + +#define LO(con32) ((con32) & 0xFFFF) +#define lo(con32) ((con32) & 0xFFFF) +#define HI(con32) (((con32) >> 16) & 0xFFFF) +#define hi(con32) (((con32) >> 16) & 0xFFFF) + +/* + * System MMR Register Map + */ +/* Clock and System Control (0xFFC00000 - 0xFFC000FF)*/ +#define PLL_CTL 0xFFC00000 /* PLL Control Register */ +#define PLL_DIV 0xFFC00004 /* PLL Divide Register */ +#define VR_CTL 0xFFC00008 /* Voltage Regulator Control Register */ +#define CHIPID 0xFFC00014 /* Chip ID register (32-bit) */ +#define PLL_STAT 0xFFC0000C /* PLL Status Register */ +#define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count Register */ + +/* System Interrupt Controller (0xFFC00100 - 0xFFC001FF) */ +#define SWRST 0xFFC00100 /* Software Reset Register */ +#define SYSCR 0xFFC00104 /* System Configuration Register */ +#define SIC_RVECT 0xFFC00108 /* Interrupt Reset Vector Address Register */ +#define SIC_IMASK 0xFFC0010C /* Interrupt Mask Register */ +#define SIC_IAR0 0xFFC00110 /* Interrupt Assignment Register 0 */ +#define SIC_IAR1 0xFFC00114 /* Interrupt Assignment Register 1 */ +#define SIC_IAR2 0xFFC00118 /* Interrupt Assignment Register 2 */ +#define SIC_IAR3 0xFFC0011C /* Interrupt Assignment Register 3 */ +#define SIC_ISR 0xFFC00120 /* Interrupt Status Register */ +#define SIC_IWR 0xFFC00124 /* Interrupt Wakeup Register */ + +/* Watchdog Timer (0xFFC00200 - 0xFFC002FF) */ +#define WDOG_CTL 0xFFC00200 /* Watchdog Control Register */ +#define WDOG_CNT 0xFFC00204 /* Watchdog Count Register */ +#define WDOG_STAT 0xFFC00208 /* Watchdog Status Register */ + +/* Real Time Clock (0xFFC00300 - 0xFFC003FF) */ +#define RTC_STAT 0xFFC00300 /* RTC Status Register */ +#define RTC_ICTL 0xFFC00304 /* RTC Interrupt Control Register */ +#define RTC_ISTAT 0xFFC00308 /* RTC Interrupt Status Register */ +#define RTC_SWCNT 0xFFC0030C /* RTC Stopwatch Count Register */ +#define RTC_ALARM 0xFFC00310 /* RTC Alarm Time Register */ +#define RTC_FAST 0xFFC00314 /* RTC Prescaler Enable Register */ +#define RTC_PREN 0xFFC00314 /* RTC Prescaler Enable Alternate Macro */ + +/* UART0 Controller (0xFFC00400 - 0xFFC004FF) */ +#define UART0_THR 0xFFC00400 /* Transmit Holding register */ +#define UART0_RBR 0xFFC00400 /* Receive Buffer register */ +#define UART0_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */ +#define UART0_IER 0xFFC00404 /* Interrupt Enable Register */ +#define UART0_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */ +#define UART0_IIR 0xFFC00408 /* Interrupt Identification Register */ +#define UART0_LCR 0xFFC0040C /* Line Control Register */ +#define UART0_MCR 0xFFC00410 /* Modem Control Register */ +#define UART0_LSR 0xFFC00414 /* Line Status Register */ +#define UART0_MSR 0xFFC00418 /* Modem Status Register */ +#define UART0_SCR 0xFFC0041C /* SCR Scratch Register */ +#define UART0_GCTL 0xFFC00424 /* Global Control Register */ + +/* SPI Controller (0xFFC00500 - 0xFFC005FF) */ +#define SPI_CTL 0xFFC00500 /* SPI Control Register */ +#define SPI_FLG 0xFFC00504 /* SPI Flag register */ +#define SPI_STAT 0xFFC00508 /* SPI Status register */ +#define SPI_TDBR 0xFFC0050C /* SPI Transmit Data Buffer Register */ +#define SPI_RDBR 0xFFC00510 /* SPI Receive Data Buffer Register */ +#define SPI_BAUD 0xFFC00514 /* SPI Baud rate Register */ +#define SPI_SHADOW 0xFFC00518 /* SPI_RDBR Shadow Register */ + +/* TIMER0-7 Registers (0xFFC00600 - 0xFFC006FF) */ +#define TIMER0_CONFIG 0xFFC00600 /* Timer 0 Configuration Register */ +#define TIMER0_COUNTER 0xFFC00604 /* Timer 0 Counter Register */ +#define TIMER0_PERIOD 0xFFC00608 /* Timer 0 Period Register */ +#define TIMER0_WIDTH 0xFFC0060C /* Timer 0 Width Register */ + +#define TIMER1_CONFIG 0xFFC00610 /* Timer 1 Configuration Register */ +#define TIMER1_COUNTER 0xFFC00614 /* Timer 1 Counter Register */ +#define TIMER1_PERIOD 0xFFC00618 /* Timer 1 Period Register */ +#define TIMER1_WIDTH 0xFFC0061C /* Timer 1 Width Register */ + +#define TIMER2_CONFIG 0xFFC00620 /* Timer 2 Configuration Register */ +#define TIMER2_COUNTER 0xFFC00624 /* Timer 2 Counter Register */ +#define TIMER2_PERIOD 0xFFC00628 /* Timer 2 Period Register */ +#define TIMER2_WIDTH 0xFFC0062C /* Timer 2 Width Register */ + +#define TIMER3_CONFIG 0xFFC00630 /* Timer 3 Configuration Register */ +#define TIMER3_COUNTER 0xFFC00634 /* Timer 3 Counter Register */ +#define TIMER3_PERIOD 0xFFC00638 /* Timer 3 Period Register */ +#define TIMER3_WIDTH 0xFFC0063C /* Timer 3 Width Register */ + +#define TIMER4_CONFIG 0xFFC00640 /* Timer 4 Configuration Register */ +#define TIMER4_COUNTER 0xFFC00644 /* Timer 4 Counter Register */ +#define TIMER4_PERIOD 0xFFC00648 /* Timer 4 Period Register */ +#define TIMER4_WIDTH 0xFFC0064C /* Timer 4 Width Register */ + +#define TIMER5_CONFIG 0xFFC00650 /* Timer 5 Configuration Register */ +#define TIMER5_COUNTER 0xFFC00654 /* Timer 5 Counter Register */ +#define TIMER5_PERIOD 0xFFC00658 /* Timer 5 Period Register */ +#define TIMER5_WIDTH 0xFFC0065C /* Timer 5 Width Register */ + +#define TIMER6_CONFIG 0xFFC00660 /* Timer 6 Configuration Register */ +#define TIMER6_COUNTER 0xFFC00664 /* Timer 6 Counter Register */ +#define TIMER6_PERIOD 0xFFC00668 /* Timer 6 Period Register */ +#define TIMER6_WIDTH 0xFFC0066C /* Timer 6 Width Register */ + +#define TIMER7_CONFIG 0xFFC00670 /* Timer 7 Configuration Register */ +#define TIMER7_COUNTER 0xFFC00674 /* Timer 7 Counter Register */ +#define TIMER7_PERIOD 0xFFC00678 /* Timer 7 Period Register */ +#define TIMER7_WIDTH 0xFFC0067C /* Timer 7 Width Register */ + +#define TIMER_ENABLE 0xFFC00680 /* Timer Enable Register */ +#define TIMER_DISABLE 0xFFC00684 /* Timer Disable Register */ +#define TIMER_STATUS 0xFFC00688 /* Timer Status Register */ + +/* General Purpose I/O Port F (0xFFC00700 - 0xFFC007FF) */ +#define PORTFIO 0xFFC00700 /* Port F I/O Pin State Specify Register */ +#define PORTFIO_CLEAR 0xFFC00704 /* Port F I/O Peripheral Interrupt Clear Register */ +#define PORTFIO_SET 0xFFC00708 /* Port F I/O Peripheral Interrupt Set Register */ +#define PORTFIO_TOGGLE 0xFFC0070C /* Port F I/O Pin State Toggle Register */ +#define PORTFIO_MASKA 0xFFC00710 /* Port F I/O Mask State Specify Interrupt A Register */ +#define PORTFIO_MASKA_CLEAR 0xFFC00714 /* Port F I/O Mask Disable Interrupt A Register */ +#define PORTFIO_MASKA_SET 0xFFC00718 /* Port F I/O Mask Enable Interrupt A Register */ +#define PORTFIO_MASKA_TOGGLE 0xFFC0071C /* Port F I/O Mask Toggle Enable Interrupt A Register */ +#define PORTFIO_MASKB 0xFFC00720 /* Port F I/O Mask State Specify Interrupt B Register */ +#define PORTFIO_MASKB_CLEAR 0xFFC00724 /* Port F I/O Mask Disable Interrupt B Register */ +#define PORTFIO_MASKB_SET 0xFFC00728 /* Port F I/O Mask Enable Interrupt B Register */ +#define PORTFIO_MASKB_TOGGLE 0xFFC0072C /* Port F I/O Mask Toggle Enable Interrupt B Register */ +#define PORTFIO_DIR 0xFFC00730 /* Port F I/O Direction Register */ +#define PORTFIO_POLAR 0xFFC00734 /* Port F I/O Source Polarity Register */ +#define PORTFIO_EDGE 0xFFC00738 /* Port F I/O Source Sensitivity Register */ +#define PORTFIO_BOTH 0xFFC0073C /* Port F I/O Set on BOTH Edges Register */ +#define PORTFIO_INEN 0xFFC00740 /* Port F I/O Input Enable Register */ + +/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */ +#define SPORT0_TCR1 0xFFC00800 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_TCR2 0xFFC00804 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_TCLKDIV 0xFFC00808 /* SPORT0 Transmit Clock Divider */ +#define SPORT0_TFSDIV 0xFFC0080C /* SPORT0 Transmit Frame Sync Divider */ +#define SPORT0_TX 0xFFC00810 /* SPORT0 TX Data Register */ +#define SPORT0_RX 0xFFC00818 /* SPORT0 RX Data Register */ +#define SPORT0_RCR1 0xFFC00820 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_RCR2 0xFFC00824 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_RCLKDIV 0xFFC00828 /* SPORT0 Receive Clock Divider */ +#define SPORT0_RFSDIV 0xFFC0082C /* SPORT0 Receive Frame Sync Divider */ +#define SPORT0_STAT 0xFFC00830 /* SPORT0 Status Register */ +#define SPORT0_CHNL 0xFFC00834 /* SPORT0 Current Channel Register */ +#define SPORT0_MCMC1 0xFFC00838 /* SPORT0 Multi-Channel Configuration Register 1 */ +#define SPORT0_MCMC2 0xFFC0083C /* SPORT0 Multi-Channel Configuration Register 2 */ +#define SPORT0_MTCS0 0xFFC00840 /* SPORT0 Multi-Channel Transmit Select Register 0 */ +#define SPORT0_MTCS1 0xFFC00844 /* SPORT0 Multi-Channel Transmit Select Register 1 */ +#define SPORT0_MTCS2 0xFFC00848 /* SPORT0 Multi-Channel Transmit Select Register 2 */ +#define SPORT0_MTCS3 0xFFC0084C /* SPORT0 Multi-Channel Transmit Select Register 3 */ +#define SPORT0_MRCS0 0xFFC00850 /* SPORT0 Multi-Channel Receive Select Register 0 */ +#define SPORT0_MRCS1 0xFFC00854 /* SPORT0 Multi-Channel Receive Select Register 1 */ +#define SPORT0_MRCS2 0xFFC00858 /* SPORT0 Multi-Channel Receive Select Register 2 */ +#define SPORT0_MRCS3 0xFFC0085C /* SPORT0 Multi-Channel Receive Select Register 3 */ + +/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */ +#define SPORT1_TCR1 0xFFC00900 /* SPORT1 Transmit Configuration 1 Register */ +#define SPORT1_TCR2 0xFFC00904 /* SPORT1 Transmit Configuration 2 Register */ +#define SPORT1_TCLKDIV 0xFFC00908 /* SPORT1 Transmit Clock Divider */ +#define SPORT1_TFSDIV 0xFFC0090C /* SPORT1 Transmit Frame Sync Divider */ +#define SPORT1_TX 0xFFC00910 /* SPORT1 TX Data Register */ +#define SPORT1_RX 0xFFC00918 /* SPORT1 RX Data Register */ +#define SPORT1_RCR1 0xFFC00920 /* SPORT1 Transmit Configuration 1 Register */ +#define SPORT1_RCR2 0xFFC00924 /* SPORT1 Transmit Configuration 2 Register */ +#define SPORT1_RCLKDIV 0xFFC00928 /* SPORT1 Receive Clock Divider */ +#define SPORT1_RFSDIV 0xFFC0092C /* SPORT1 Receive Frame Sync Divider */ +#define SPORT1_STAT 0xFFC00930 /* SPORT1 Status Register */ +#define SPORT1_CHNL 0xFFC00934 /* SPORT1 Current Channel Register */ +#define SPORT1_MCMC1 0xFFC00938 /* SPORT1 Multi-Channel Configuration Register 1 */ +#define SPORT1_MCMC2 0xFFC0093C /* SPORT1 Multi-Channel Configuration Register 2 */ +#define SPORT1_MTCS0 0xFFC00940 /* SPORT1 Multi-Channel Transmit Select Register 0 */ +#define SPORT1_MTCS1 0xFFC00944 /* SPORT1 Multi-Channel Transmit Select Register 1 */ +#define SPORT1_MTCS2 0xFFC00948 /* SPORT1 Multi-Channel Transmit Select Register 2 */ +#define SPORT1_MTCS3 0xFFC0094C /* SPORT1 Multi-Channel Transmit Select Register 3 */ +#define SPORT1_MRCS0 0xFFC00950 /* SPORT1 Multi-Channel Receive Select Register 0 */ +#define SPORT1_MRCS1 0xFFC00954 /* SPORT1 Multi-Channel Receive Select Register 1 */ +#define SPORT1_MRCS2 0xFFC00958 /* SPORT1 Multi-Channel Receive Select Register 2 */ +#define SPORT1_MRCS3 0xFFC0095C /* SPORT1 Multi-Channel Receive Select Register 3 */ + +/* External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */ +#define EBIU_AMGCTL 0xFFC00A00 /* Asynchronous Memory Global Control Register */ +#define EBIU_AMBCTL0 0xFFC00A04 /* Asynchronous Memory Bank Control Register 0 */ +#define EBIU_AMBCTL1 0xFFC00A08 /* Asynchronous Memory Bank Control Register 1 */ +#define EBIU_SDGCTL 0xFFC00A10 /* SDRAM Global Control Register */ +#define EBIU_SDBCTL 0xFFC00A14 /* SDRAM Bank Control Register */ +#define EBIU_SDRRC 0xFFC00A18 /* SDRAM Refresh Rate Control Register */ +#define EBIU_SDSTAT 0xFFC00A1C /* SDRAM Status Register */ + +/* DMA Traffic Control Registers */ +#define DMA_TCPER 0xFFC00B0C /* Traffic Control Periods Register */ +#define DMA_TCCNT 0xFFC00B10 /* Traffic Control Current Counts Register */ + +/* DMA Controller (0xFFC00C00 - 0xFFC00FFF) */ +#define DMA0_NEXT_DESC_PTR 0xFFC00C00 /* DMA Channel 0 Next Descriptor Pointer Register */ +#define DMA0_START_ADDR 0xFFC00C04 /* DMA Channel 0 Start Address Register */ +#define DMA0_CONFIG 0xFFC00C08 /* DMA Channel 0 Configuration Register */ +#define DMA0_X_COUNT 0xFFC00C10 /* DMA Channel 0 X Count Register */ +#define DMA0_X_MODIFY 0xFFC00C14 /* DMA Channel 0 X Modify Register */ +#define DMA0_Y_COUNT 0xFFC00C18 /* DMA Channel 0 Y Count Register */ +#define DMA0_Y_MODIFY 0xFFC00C1C /* DMA Channel 0 Y Modify Register */ +#define DMA0_CURR_DESC_PTR 0xFFC00C20 /* DMA Channel 0 Current Descriptor Pointer Register */ +#define DMA0_CURR_ADDR 0xFFC00C24 /* DMA Channel 0 Current Address Register */ +#define DMA0_IRQ_STATUS 0xFFC00C28 /* DMA Channel 0 Interrupt/Status Register */ +#define DMA0_PERIPHERAL_MAP 0xFFC00C2C /* DMA Channel 0 Peripheral Map Register */ +#define DMA0_CURR_X_COUNT 0xFFC00C30 /* DMA Channel 0 Current X Count Register */ +#define DMA0_CURR_Y_COUNT 0xFFC00C38 /* DMA Channel 0 Current Y Count Register */ + +#define DMA1_NEXT_DESC_PTR 0xFFC00C40 /* DMA Channel 1 Next Descriptor Pointer Register */ +#define DMA1_START_ADDR 0xFFC00C44 /* DMA Channel 1 Start Address Register */ +#define DMA1_CONFIG 0xFFC00C48 /* DMA Channel 1 Configuration Register */ +#define DMA1_X_COUNT 0xFFC00C50 /* DMA Channel 1 X Count Register */ +#define DMA1_X_MODIFY 0xFFC00C54 /* DMA Channel 1 X Modify Register */ +#define DMA1_Y_COUNT 0xFFC00C58 /* DMA Channel 1 Y Count Register */ +#define DMA1_Y_MODIFY 0xFFC00C5C /* DMA Channel 1 Y Modify Register */ +#define DMA1_CURR_DESC_PTR 0xFFC00C60 /* DMA Channel 1 Current Descriptor Pointer Register */ +#define DMA1_CURR_ADDR 0xFFC00C64 /* DMA Channel 1 Current Address Register */ +#define DMA1_IRQ_STATUS 0xFFC00C68 /* DMA Channel 1 Interrupt/Status Register */ +#define DMA1_PERIPHERAL_MAP 0xFFC00C6C /* DMA Channel 1 Peripheral Map Register */ +#define DMA1_CURR_X_COUNT 0xFFC00C70 /* DMA Channel 1 Current X Count Register */ +#define DMA1_CURR_Y_COUNT 0xFFC00C78 /* DMA Channel 1 Current Y Count Register */ + +#define DMA2_NEXT_DESC_PTR 0xFFC00C80 /* DMA Channel 2 Next Descriptor Pointer Register */ +#define DMA2_START_ADDR 0xFFC00C84 /* DMA Channel 2 Start Address Register */ +#define DMA2_CONFIG 0xFFC00C88 /* DMA Channel 2 Configuration Register */ +#define DMA2_X_COUNT 0xFFC00C90 /* DMA Channel 2 X Count Register */ +#define DMA2_X_MODIFY 0xFFC00C94 /* DMA Channel 2 X Modify Register */ +#define DMA2_Y_COUNT 0xFFC00C98 /* DMA Channel 2 Y Count Register */ +#define DMA2_Y_MODIFY 0xFFC00C9C /* DMA Channel 2 Y Modify Register */ +#define DMA2_CURR_DESC_PTR 0xFFC00CA0 /* DMA Channel 2 Current Descriptor Pointer Register */ +#define DMA2_CURR_ADDR 0xFFC00CA4 /* DMA Channel 2 Current Address Register */ +#define DMA2_IRQ_STATUS 0xFFC00CA8 /* DMA Channel 2 Interrupt/Status Register */ +#define DMA2_PERIPHERAL_MAP 0xFFC00CAC /* DMA Channel 2 Peripheral Map Register */ +#define DMA2_CURR_X_COUNT 0xFFC00CB0 /* DMA Channel 2 Current X Count Register */ +#define DMA2_CURR_Y_COUNT 0xFFC00CB8 /* DMA Channel 2 Current Y Count Register */ + +#define DMA3_NEXT_DESC_PTR 0xFFC00CC0 /* DMA Channel 3 Next Descriptor Pointer Register */ +#define DMA3_START_ADDR 0xFFC00CC4 /* DMA Channel 3 Start Address Register */ +#define DMA3_CONFIG 0xFFC00CC8 /* DMA Channel 3 Configuration Register */ +#define DMA3_X_COUNT 0xFFC00CD0 /* DMA Channel 3 X Count Register */ +#define DMA3_X_MODIFY 0xFFC00CD4 /* DMA Channel 3 X Modify Register */ +#define DMA3_Y_COUNT 0xFFC00CD8 /* DMA Channel 3 Y Count Register */ +#define DMA3_Y_MODIFY 0xFFC00CDC /* DMA Channel 3 Y Modify Register */ +#define DMA3_CURR_DESC_PTR 0xFFC00CE0 /* DMA Channel 3 Current Descriptor Pointer Register */ +#define DMA3_CURR_ADDR 0xFFC00CE4 /* DMA Channel 3 Current Address Register */ +#define DMA3_IRQ_STATUS 0xFFC00CE8 /* DMA Channel 3 Interrupt/Status Register */ +#define DMA3_PERIPHERAL_MAP 0xFFC00CEC /* DMA Channel 3 Peripheral Map Register */ +#define DMA3_CURR_X_COUNT 0xFFC00CF0 /* DMA Channel 3 Current X Count Register */ +#define DMA3_CURR_Y_COUNT 0xFFC00CF8 /* DMA Channel 3 Current Y Count Register */ + +#define DMA4_NEXT_DESC_PTR 0xFFC00D00 /* DMA Channel 4 Next Descriptor Pointer Register */ +#define DMA4_START_ADDR 0xFFC00D04 /* DMA Channel 4 Start Address Register */ +#define DMA4_CONFIG 0xFFC00D08 /* DMA Channel 4 Configuration Register */ +#define DMA4_X_COUNT 0xFFC00D10 /* DMA Channel 4 X Count Register */ +#define DMA4_X_MODIFY 0xFFC00D14 /* DMA Channel 4 X Modify Register */ +#define DMA4_Y_COUNT 0xFFC00D18 /* DMA Channel 4 Y Count Register */ +#define DMA4_Y_MODIFY 0xFFC00D1C /* DMA Channel 4 Y Modify Register */ +#define DMA4_CURR_DESC_PTR 0xFFC00D20 /* DMA Channel 4 Current Descriptor Pointer Register */ +#define DMA4_CURR_ADDR 0xFFC00D24 /* DMA Channel 4 Current Address Register */ +#define DMA4_IRQ_STATUS 0xFFC00D28 /* DMA Channel 4 Interrupt/Status Register */ +#define DMA4_PERIPHERAL_MAP 0xFFC00D2C /* DMA Channel 4 Peripheral Map Register */ +#define DMA4_CURR_X_COUNT 0xFFC00D30 /* DMA Channel 4 Current X Count Register */ +#define DMA4_CURR_Y_COUNT 0xFFC00D38 /* DMA Channel 4 Current Y Count Register */ + +#define DMA5_NEXT_DESC_PTR 0xFFC00D40 /* DMA Channel 5 Next Descriptor Pointer Register */ +#define DMA5_START_ADDR 0xFFC00D44 /* DMA Channel 5 Start Address Register */ +#define DMA5_CONFIG 0xFFC00D48 /* DMA Channel 5 Configuration Register */ +#define DMA5_X_COUNT 0xFFC00D50 /* DMA Channel 5 X Count Register */ +#define DMA5_X_MODIFY 0xFFC00D54 /* DMA Channel 5 X Modify Register */ +#define DMA5_Y_COUNT 0xFFC00D58 /* DMA Channel 5 Y Count Register */ +#define DMA5_Y_MODIFY 0xFFC00D5C /* DMA Channel 5 Y Modify Register */ +#define DMA5_CURR_DESC_PTR 0xFFC00D60 /* DMA Channel 5 Current Descriptor Pointer Register */ +#define DMA5_CURR_ADDR 0xFFC00D64 /* DMA Channel 5 Current Address Register */ +#define DMA5_IRQ_STATUS 0xFFC00D68 /* DMA Channel 5 Interrupt/Status Register */ +#define DMA5_PERIPHERAL_MAP 0xFFC00D6C /* DMA Channel 5 Peripheral Map Register */ +#define DMA5_CURR_X_COUNT 0xFFC00D70 /* DMA Channel 5 Current X Count Register */ +#define DMA5_CURR_Y_COUNT 0xFFC00D78 /* DMA Channel 5 Current Y Count Register */ + +#define DMA6_NEXT_DESC_PTR 0xFFC00D80 /* DMA Channel 6 Next Descriptor Pointer Register */ +#define DMA6_START_ADDR 0xFFC00D84 /* DMA Channel 6 Start Address Register */ +#define DMA6_CONFIG 0xFFC00D88 /* DMA Channel 6 Configuration Register */ +#define DMA6_X_COUNT 0xFFC00D90 /* DMA Channel 6 X Count Register */ +#define DMA6_X_MODIFY 0xFFC00D94 /* DMA Channel 6 X Modify Register */ +#define DMA6_Y_COUNT 0xFFC00D98 /* DMA Channel 6 Y Count Register */ +#define DMA6_Y_MODIFY 0xFFC00D9C /* DMA Channel 6 Y Modify Register */ +#define DMA6_CURR_DESC_PTR 0xFFC00DA0 /* DMA Channel 6 Current Descriptor Pointer Register */ +#define DMA6_CURR_ADDR 0xFFC00DA4 /* DMA Channel 6 Current Address Register */ +#define DMA6_IRQ_STATUS 0xFFC00DA8 /* DMA Channel 6 Interrupt/Status Register */ +#define DMA6_PERIPHERAL_MAP 0xFFC00DAC /* DMA Channel 6 Peripheral Map Register */ +#define DMA6_CURR_X_COUNT 0xFFC00DB0 /* DMA Channel 6 Current X Count Register */ +#define DMA6_CURR_Y_COUNT 0xFFC00DB8 /* DMA Channel 6 Current Y Count Register */ + +#define DMA7_NEXT_DESC_PTR 0xFFC00DC0 /* DMA Channel 7 Next Descriptor Pointer Register */ +#define DMA7_START_ADDR 0xFFC00DC4 /* DMA Channel 7 Start Address Register */ +#define DMA7_CONFIG 0xFFC00DC8 /* DMA Channel 7 Configuration Register */ +#define DMA7_X_COUNT 0xFFC00DD0 /* DMA Channel 7 X Count Register */ +#define DMA7_X_MODIFY 0xFFC00DD4 /* DMA Channel 7 X Modify Register */ +#define DMA7_Y_COUNT 0xFFC00DD8 /* DMA Channel 7 Y Count Register */ +#define DMA7_Y_MODIFY 0xFFC00DDC /* DMA Channel 7 Y Modify Register */ +#define DMA7_CURR_DESC_PTR 0xFFC00DE0 /* DMA Channel 7 Current Descriptor Pointer Register */ +#define DMA7_CURR_ADDR 0xFFC00DE4 /* DMA Channel 7 Current Address Register */ +#define DMA7_IRQ_STATUS 0xFFC00DE8 /* DMA Channel 7 Interrupt/Status Register */ +#define DMA7_PERIPHERAL_MAP 0xFFC00DEC /* DMA Channel 7 Peripheral Map Register */ +#define DMA7_CURR_X_COUNT 0xFFC00DF0 /* DMA Channel 7 Current X Count Register */ +#define DMA7_CURR_Y_COUNT 0xFFC00DF8 /* DMA Channel 7 Current Y Count Register */ + +#define DMA8_NEXT_DESC_PTR 0xFFC00E00 /* DMA Channel 8 Next Descriptor Pointer Register */ +#define DMA8_START_ADDR 0xFFC00E04 /* DMA Channel 8 Start Address Register */ +#define DMA8_CONFIG 0xFFC00E08 /* DMA Channel 8 Configuration Register */ +#define DMA8_X_COUNT 0xFFC00E10 /* DMA Channel 8 X Count Register */ +#define DMA8_X_MODIFY 0xFFC00E14 /* DMA Channel 8 X Modify Register */ +#define DMA8_Y_COUNT 0xFFC00E18 /* DMA Channel 8 Y Count Register */ +#define DMA8_Y_MODIFY 0xFFC00E1C /* DMA Channel 8 Y Modify Register */ +#define DMA8_CURR_DESC_PTR 0xFFC00E20 /* DMA Channel 8 Current Descriptor Pointer Register */ +#define DMA8_CURR_ADDR 0xFFC00E24 /* DMA Channel 8 Current Address Register */ +#define DMA8_IRQ_STATUS 0xFFC00E28 /* DMA Channel 8 Interrupt/Status Register */ +#define DMA8_PERIPHERAL_MAP 0xFFC00E2C /* DMA Channel 8 Peripheral Map Register */ +#define DMA8_CURR_X_COUNT 0xFFC00E30 /* DMA Channel 8 Current X Count Register */ +#define DMA8_CURR_Y_COUNT 0xFFC00E38 /* DMA Channel 8 Current Y Count Register */ + +#define DMA9_NEXT_DESC_PTR 0xFFC00E40 /* DMA Channel 9 Next Descriptor Pointer Register */ +#define DMA9_START_ADDR 0xFFC00E44 /* DMA Channel 9 Start Address Register */ +#define DMA9_CONFIG 0xFFC00E48 /* DMA Channel 9 Configuration Register */ +#define DMA9_X_COUNT 0xFFC00E50 /* DMA Channel 9 X Count Register */ +#define DMA9_X_MODIFY 0xFFC00E54 /* DMA Channel 9 X Modify Register */ +#define DMA9_Y_COUNT 0xFFC00E58 /* DMA Channel 9 Y Count Register */ +#define DMA9_Y_MODIFY 0xFFC00E5C /* DMA Channel 9 Y Modify Register */ +#define DMA9_CURR_DESC_PTR 0xFFC00E60 /* DMA Channel 9 Current Descriptor Pointer Register */ +#define DMA9_CURR_ADDR 0xFFC00E64 /* DMA Channel 9 Current Address Register */ +#define DMA9_IRQ_STATUS 0xFFC00E68 /* DMA Channel 9 Interrupt/Status Register */ +#define DMA9_PERIPHERAL_MAP 0xFFC00E6C /* DMA Channel 9 Peripheral Map Register */ +#define DMA9_CURR_X_COUNT 0xFFC00E70 /* DMA Channel 9 Current X Count Register */ +#define DMA9_CURR_Y_COUNT 0xFFC00E78 /* DMA Channel 9 Current Y Count Register */ + +#define DMA10_NEXT_DESC_PTR 0xFFC00E80 /* DMA Channel 10 Next Descriptor Pointer Register */ +#define DMA10_START_ADDR 0xFFC00E84 /* DMA Channel 10 Start Address Register */ +#define DMA10_CONFIG 0xFFC00E88 /* DMA Channel 10 Configuration Register */ +#define DMA10_X_COUNT 0xFFC00E90 /* DMA Channel 10 X Count Register */ +#define DMA10_X_MODIFY 0xFFC00E94 /* DMA Channel 10 X Modify Register */ +#define DMA10_Y_COUNT 0xFFC00E98 /* DMA Channel 10 Y Count Register */ +#define DMA10_Y_MODIFY 0xFFC00E9C /* DMA Channel 10 Y Modify Register */ +#define DMA10_CURR_DESC_PTR 0xFFC00EA0 /* DMA Channel 10 Current Descriptor Pointer Register */ +#define DMA10_CURR_ADDR 0xFFC00EA4 /* DMA Channel 10 Current Address Register */ +#define DMA10_IRQ_STATUS 0xFFC00EA8 /* DMA Channel 10 Interrupt/Status Register */ +#define DMA10_PERIPHERAL_MAP 0xFFC00EAC /* DMA Channel 10 Peripheral Map Register */ +#define DMA10_CURR_X_COUNT 0xFFC00EB0 /* DMA Channel 10 Current X Count Register */ +#define DMA10_CURR_Y_COUNT 0xFFC00EB8 /* DMA Channel 10 Current Y Count Register */ + +#define DMA11_NEXT_DESC_PTR 0xFFC00EC0 /* DMA Channel 11 Next Descriptor Pointer Register */ +#define DMA11_START_ADDR 0xFFC00EC4 /* DMA Channel 11 Start Address Register */ +#define DMA11_CONFIG 0xFFC00EC8 /* DMA Channel 11 Configuration Register */ +#define DMA11_X_COUNT 0xFFC00ED0 /* DMA Channel 11 X Count Register */ +#define DMA11_X_MODIFY 0xFFC00ED4 /* DMA Channel 11 X Modify Register */ +#define DMA11_Y_COUNT 0xFFC00ED8 /* DMA Channel 11 Y Count Register */ +#define DMA11_Y_MODIFY 0xFFC00EDC /* DMA Channel 11 Y Modify Register */ +#define DMA11_CURR_DESC_PTR 0xFFC00EE0 /* DMA Channel 11 Current Descriptor Pointer Register */ +#define DMA11_CURR_ADDR 0xFFC00EE4 /* DMA Channel 11 Current Address Register */ +#define DMA11_IRQ_STATUS 0xFFC00EE8 /* DMA Channel 11 Interrupt/Status Register */ +#define DMA11_PERIPHERAL_MAP 0xFFC00EEC /* DMA Channel 11 Peripheral Map Register */ +#define DMA11_CURR_X_COUNT 0xFFC00EF0 /* DMA Channel 11 Current X Count Register */ +#define DMA11_CURR_Y_COUNT 0xFFC00EF8 /* DMA Channel 11 Current Y Count Register */ + +#define MDMA_D0_NEXT_DESC_PTR 0xFFC00F00 /* MemDMA Stream 0 Destination Next Descriptor Pointer Register */ +#define MDMA_D0_START_ADDR 0xFFC00F04 /* MemDMA Stream 0 Destination Start Address Register */ +#define MDMA_D0_CONFIG 0xFFC00F08 /* MemDMA Stream 0 Destination Configuration Register */ +#define MDMA_D0_X_COUNT 0xFFC00F10 /* MemDMA Stream 0 Destination X Count Register */ +#define MDMA_D0_X_MODIFY 0xFFC00F14 /* MemDMA Stream 0 Destination X Modify Register */ +#define MDMA_D0_Y_COUNT 0xFFC00F18 /* MemDMA Stream 0 Destination Y Count Register */ +#define MDMA_D0_Y_MODIFY 0xFFC00F1C /* MemDMA Stream 0 Destination Y Modify Register */ +#define MDMA_D0_CURR_DESC_PTR 0xFFC00F20 /* MemDMA Stream 0 Destination Current Descriptor Pointer Register */ +#define MDMA_D0_CURR_ADDR 0xFFC00F24 /* MemDMA Stream 0 Destination Current Address Register */ +#define MDMA_D0_IRQ_STATUS 0xFFC00F28 /* MemDMA Stream 0 Destination Interrupt/Status Register */ +#define MDMA_D0_PERIPHERAL_MAP 0xFFC00F2C /* MemDMA Stream 0 Destination Peripheral Map Register */ +#define MDMA_D0_CURR_X_COUNT 0xFFC00F30 /* MemDMA Stream 0 Destination Current X Count Register */ +#define MDMA_D0_CURR_Y_COUNT 0xFFC00F38 /* MemDMA Stream 0 Destination Current Y Count Register */ + +#define MDMA_S0_NEXT_DESC_PTR 0xFFC00F40 /* MemDMA Stream 0 Source Next Descriptor Pointer Register */ +#define MDMA_S0_START_ADDR 0xFFC00F44 /* MemDMA Stream 0 Source Start Address Register */ +#define MDMA_S0_CONFIG 0xFFC00F48 /* MemDMA Stream 0 Source Configuration Register */ +#define MDMA_S0_X_COUNT 0xFFC00F50 /* MemDMA Stream 0 Source X Count Register */ +#define MDMA_S0_X_MODIFY 0xFFC00F54 /* MemDMA Stream 0 Source X Modify Register */ +#define MDMA_S0_Y_COUNT 0xFFC00F58 /* MemDMA Stream 0 Source Y Count Register */ +#define MDMA_S0_Y_MODIFY 0xFFC00F5C /* MemDMA Stream 0 Source Y Modify Register */ +#define MDMA_S0_CURR_DESC_PTR 0xFFC00F60 /* MemDMA Stream 0 Source Current Descriptor Pointer Register */ +#define MDMA_S0_CURR_ADDR 0xFFC00F64 /* MemDMA Stream 0 Source Current Address Register */ +#define MDMA_S0_IRQ_STATUS 0xFFC00F68 /* MemDMA Stream 0 Source Interrupt/Status Register */ +#define MDMA_S0_PERIPHERAL_MAP 0xFFC00F6C /* MemDMA Stream 0 Source Peripheral Map Register */ +#define MDMA_S0_CURR_X_COUNT 0xFFC00F70 /* MemDMA Stream 0 Source Current X Count Register */ +#define MDMA_S0_CURR_Y_COUNT 0xFFC00F78 /* MemDMA Stream 0 Source Current Y Count Register */ + +#define MDMA_D1_NEXT_DESC_PTR 0xFFC00F80 /* MemDMA Stream 1 Destination Next Descriptor Pointer Register */ +#define MDMA_D1_START_ADDR 0xFFC00F84 /* MemDMA Stream 1 Destination Start Address Register */ +#define MDMA_D1_CONFIG 0xFFC00F88 /* MemDMA Stream 1 Destination Configuration Register */ +#define MDMA_D1_X_COUNT 0xFFC00F90 /* MemDMA Stream 1 Destination X Count Register */ +#define MDMA_D1_X_MODIFY 0xFFC00F94 /* MemDMA Stream 1 Destination X Modify Register */ +#define MDMA_D1_Y_COUNT 0xFFC00F98 /* MemDMA Stream 1 Destination Y Count Register */ +#define MDMA_D1_Y_MODIFY 0xFFC00F9C /* MemDMA Stream 1 Destination Y Modify Register */ +#define MDMA_D1_CURR_DESC_PTR 0xFFC00FA0 /* MemDMA Stream 1 Destination Current Descriptor Pointer Register */ +#define MDMA_D1_CURR_ADDR 0xFFC00FA4 /* MemDMA Stream 1 Destination Current Address Register */ +#define MDMA_D1_IRQ_STATUS 0xFFC00FA8 /* MemDMA Stream 1 Destination Interrupt/Status Register */ +#define MDMA_D1_PERIPHERAL_MAP 0xFFC00FAC /* MemDMA Stream 1 Destination Peripheral Map Register */ +#define MDMA_D1_CURR_X_COUNT 0xFFC00FB0 /* MemDMA Stream 1 Destination Current X Count Register */ +#define MDMA_D1_CURR_Y_COUNT 0xFFC00FB8 /* MemDMA Stream 1 Destination Current Y Count Register */ + +#define MDMA_S1_NEXT_DESC_PTR 0xFFC00FC0 /* MemDMA Stream 1 Source Next Descriptor Pointer Register */ +#define MDMA_S1_START_ADDR 0xFFC00FC4 /* MemDMA Stream 1 Source Start Address Register */ +#define MDMA_S1_CONFIG 0xFFC00FC8 /* MemDMA Stream 1 Source Configuration Register */ +#define MDMA_S1_X_COUNT 0xFFC00FD0 /* MemDMA Stream 1 Source X Count Register */ +#define MDMA_S1_X_MODIFY 0xFFC00FD4 /* MemDMA Stream 1 Source X Modify Register */ +#define MDMA_S1_Y_COUNT 0xFFC00FD8 /* MemDMA Stream 1 Source Y Count Register */ +#define MDMA_S1_Y_MODIFY 0xFFC00FDC /* MemDMA Stream 1 Source Y Modify Register */ +#define MDMA_S1_CURR_DESC_PTR 0xFFC00FE0 /* MemDMA Stream 1 Source Current Descriptor Pointer Register */ +#define MDMA_S1_CURR_ADDR 0xFFC00FE4 /* MemDMA Stream 1 Source Current Address Register */ +#define MDMA_S1_IRQ_STATUS 0xFFC00FE8 /* MemDMA Stream 1 Source Interrupt/Status Register */ +#define MDMA_S1_PERIPHERAL_MAP 0xFFC00FEC /* MemDMA Stream 1 Source Peripheral Map Register */ +#define MDMA_S1_CURR_X_COUNT 0xFFC00FF0 /* MemDMA Stream 1 Source Current X Count Register */ +#define MDMA_S1_CURR_Y_COUNT 0xFFC00FF8 /* MemDMA Stream 1 Source Current Y Count Register */ + +/* Parallel Peripheral Interface (0xFFC01000 - 0xFFC010FF) */ +#define PPI_CONTROL 0xFFC01000 /* PPI Control Register */ +#define PPI_STATUS 0xFFC01004 /* PPI Status Register */ +#define PPI_COUNT 0xFFC01008 /* PPI Transfer Count Register */ +#define PPI_DELAY 0xFFC0100C /* PPI Delay Count Register */ +#define PPI_FRAME 0xFFC01010 /* PPI Frame Length Register */ + +/* Two-Wire Interface (0xFFC01400 - 0xFFC014FF) */ +#define TWI_CLKDIV 0xFFC01400 /* Serial Clock Divider Register */ +#define TWI_CONTROL 0xFFC01404 /* TWI Control Register */ +#define TWI_SLAVE_CTL 0xFFC01408 /* Slave Mode Control Register */ +#define TWI_SLAVE_STAT 0xFFC0140C /* Slave Mode Status Register */ +#define TWI_SLAVE_ADDR 0xFFC01410 /* Slave Mode Address Register */ +#define TWI_MASTER_CTL 0xFFC01414 /* Master Mode Control Register */ +#define TWI_MASTER_STAT 0xFFC01418 /* Master Mode Status Register */ +#define TWI_MASTER_ADDR 0xFFC0141C /* Master Mode Address Register */ +#define TWI_INT_STAT 0xFFC01420 /* TWI Interrupt Status Register */ +#define TWI_INT_MASK 0xFFC01424 /* TWI Master Interrupt Mask Register */ +#define TWI_FIFO_CTL 0xFFC01428 /* FIFO Control Register */ +#define TWI_FIFO_STAT 0xFFC0142C /* FIFO Status Register */ +#define TWI_XMT_DATA8 0xFFC01480 /* FIFO Transmit Data Single Byte Register */ +#define TWI_XMT_DATA16 0xFFC01484 /* FIFO Transmit Data Double Byte Register */ +#define TWI_RCV_DATA8 0xFFC01488 /* FIFO Receive Data Single Byte Register */ +#define TWI_RCV_DATA16 0xFFC0148C /* FIFO Receive Data Double Byte Register */ + +/* General Purpose I/O Port G (0xFFC01500 - 0xFFC015FF) */ +#define PORTGIO 0xFFC01500 /* Port G I/O Pin State Specify Register */ +#define PORTGIO_CLEAR 0xFFC01504 /* Port G I/O Peripheral Interrupt Clear Register */ +#define PORTGIO_SET 0xFFC01508 /* Port G I/O Peripheral Interrupt Set Register */ +#define PORTGIO_TOGGLE 0xFFC0150C /* Port G I/O Pin State Toggle Register */ +#define PORTGIO_MASKA 0xFFC01510 /* Port G I/O Mask State Specify Interrupt A Register */ +#define PORTGIO_MASKA_CLEAR 0xFFC01514 /* Port G I/O Mask Disable Interrupt A Register */ +#define PORTGIO_MASKA_SET 0xFFC01518 /* Port G I/O Mask Enable Interrupt A Register */ +#define PORTGIO_MASKA_TOGGLE 0xFFC0151C /* Port G I/O Mask Toggle Enable Interrupt A Register */ +#define PORTGIO_MASKB 0xFFC01520 /* Port G I/O Mask State Specify Interrupt B Register */ +#define PORTGIO_MASKB_CLEAR 0xFFC01524 /* Port G I/O Mask Disable Interrupt B Register */ +#define PORTGIO_MASKB_SET 0xFFC01528 /* Port G I/O Mask Enable Interrupt B Register */ +#define PORTGIO_MASKB_TOGGLE 0xFFC0152C /* Port G I/O Mask Toggle Enable Interrupt B Register */ +#define PORTGIO_DIR 0xFFC01530 /* Port G I/O Direction Register */ +#define PORTGIO_POLAR 0xFFC01534 /* Port G I/O Source Polarity Register */ +#define PORTGIO_EDGE 0xFFC01538 /* Port G I/O Source Sensitivity Register */ +#define PORTGIO_BOTH 0xFFC0153C /* Port G I/O Set on BOTH Edges Register */ +#define PORTGIO_INEN 0xFFC01540 /* Port G I/O Input Enable Register */ + +/* General Purpose I/O Port H (0xFFC01700 - 0xFFC017FF) */ +#define PORTHIO 0xFFC01700 /* Port H I/O Pin State Specify Register */ +#define PORTHIO_CLEAR 0xFFC01704 /* Port H I/O Peripheral Interrupt Clear Register */ +#define PORTHIO_SET 0xFFC01708 /* Port H I/O Peripheral Interrupt Set Register */ +#define PORTHIO_TOGGLE 0xFFC0170C /* Port H I/O Pin State Toggle Register */ +#define PORTHIO_MASKA 0xFFC01710 /* Port H I/O Mask State Specify Interrupt A Register */ +#define PORTHIO_MASKA_CLEAR 0xFFC01714 /* Port H I/O Mask Disable Interrupt A Register */ +#define PORTHIO_MASKA_SET 0xFFC01718 /* Port H I/O Mask Enable Interrupt A Register */ +#define PORTHIO_MASKA_TOGGLE 0xFFC0171C /* Port H I/O Mask Toggle Enable Interrupt A Register */ +#define PORTHIO_MASKB 0xFFC01720 /* Port H I/O Mask State Specify Interrupt B Register */ +#define PORTHIO_MASKB_CLEAR 0xFFC01724 /* Port H I/O Mask Disable Interrupt B Register */ +#define PORTHIO_MASKB_SET 0xFFC01728 /* Port H I/O Mask Enable Interrupt B Register */ +#define PORTHIO_MASKB_TOGGLE 0xFFC0172C /* Port H I/O Mask Toggle Enable Interrupt B Register */ +#define PORTHIO_DIR 0xFFC01730 /* Port H I/O Direction Register */ +#define PORTHIO_POLAR 0xFFC01734 /* Port H I/O Source Polarity Register */ +#define PORTHIO_EDGE 0xFFC01738 /* Port H I/O Source Sensitivity Register */ +#define PORTHIO_BOTH 0xFFC0173C /* Port H I/O Set on BOTH Edges Register */ +#define PORTHIO_INEN 0xFFC01740 /* Port H I/O Input Enable Register */ + +/* UART1 Controller (0xFFC02000 - 0xFFC020FF) */ +#define UART1_THR 0xFFC02000 /* Transmit Holding register */ +#define UART1_RBR 0xFFC02000 /* Receive Buffer register */ +#define UART1_DLL 0xFFC02000 /* Divisor Latch (Low-Byte) */ +#define UART1_IER 0xFFC02004 /* Interrupt Enable Register */ +#define UART1_DLH 0xFFC02004 /* Divisor Latch (High-Byte) */ +#define UART1_IIR 0xFFC02008 /* Interrupt Identification Register */ +#define UART1_LCR 0xFFC0200C /* Line Control Register */ +#define UART1_MCR 0xFFC02010 /* Modem Control Register */ +#define UART1_LSR 0xFFC02014 /* Line Status Register */ +#define UART1_MSR 0xFFC02018 /* Modem Status Register */ +#define UART1_SCR 0xFFC0201C /* SCR Scratch Register */ +#define UART1_GCTL 0xFFC02024 /* Global Control Register */ + +/* CAN Controller (0xFFC02A00 - 0xFFC02FFF) */ +/* For Mailboxes 0-15 */ +#define CAN_MC1 0xFFC02A00 /* Mailbox config reg 1 */ +#define CAN_MD1 0xFFC02A04 /* Mailbox direction reg 1 */ +#define CAN_TRS1 0xFFC02A08 /* Transmit Request Set reg 1 */ +#define CAN_TRR1 0xFFC02A0C /* Transmit Request Reset reg 1 */ +#define CAN_TA1 0xFFC02A10 /* Transmit Acknowledge reg 1 */ +#define CAN_AA1 0xFFC02A14 /* Transmit Abort Acknowledge reg 1 */ +#define CAN_RMP1 0xFFC02A18 /* Receive Message Pending reg 1 */ +#define CAN_RML1 0xFFC02A1C /* Receive Message Lost reg 1 */ +#define CAN_MBTIF1 0xFFC02A20 /* Mailbox Transmit Interrupt Flag reg 1 */ +#define CAN_MBRIF1 0xFFC02A24 /* Mailbox Receive Interrupt Flag reg 1 */ +#define CAN_MBIM1 0xFFC02A28 /* Mailbox Interrupt Mask reg 1 */ +#define CAN_RFH1 0xFFC02A2C /* Remote Frame Handling reg 1 */ +#define CAN_OPSS1 0xFFC02A30 /* Overwrite Protection Single Shot Xmit reg 1 */ + +/* For Mailboxes 16-31 */ +#define CAN_MC2 0xFFC02A40 /* Mailbox config reg 2 */ +#define CAN_MD2 0xFFC02A44 /* Mailbox direction reg 2 */ +#define CAN_TRS2 0xFFC02A48 /* Transmit Request Set reg 2 */ +#define CAN_TRR2 0xFFC02A4C /* Transmit Request Reset reg 2 */ +#define CAN_TA2 0xFFC02A50 /* Transmit Acknowledge reg 2 */ +#define CAN_AA2 0xFFC02A54 /* Transmit Abort Acknowledge reg 2 */ +#define CAN_RMP2 0xFFC02A58 /* Receive Message Pending reg 2 */ +#define CAN_RML2 0xFFC02A5C /* Receive Message Lost reg 2 */ +#define CAN_MBTIF2 0xFFC02A60 /* Mailbox Transmit Interrupt Flag reg 2 */ +#define CAN_MBRIF2 0xFFC02A64 /* Mailbox Receive Interrupt Flag reg 2 */ +#define CAN_MBIM2 0xFFC02A68 /* Mailbox Interrupt Mask reg 2 */ +#define CAN_RFH2 0xFFC02A6C /* Remote Frame Handling reg 2 */ +#define CAN_OPSS2 0xFFC02A70 /* Overwrite Protection Single Shot Xmit reg 2 */ + +/* CAN Configuration, Control, and Status Registers */ +#define CAN_CLOCK 0xFFC02A80 /* Bit Timing Configuration register 0 */ +#define CAN_TIMING 0xFFC02A84 /* Bit Timing Configuration register 1 */ +#define CAN_DEBUG 0xFFC02A88 /* Debug Register */ +#define CAN_STATUS 0xFFC02A8C /* Global Status Register */ +#define CAN_CEC 0xFFC02A90 /* Error Counter Register */ +#define CAN_GIS 0xFFC02A94 /* Global Interrupt Status Register */ +#define CAN_GIM 0xFFC02A98 /* Global Interrupt Mask Register */ +#define CAN_GIF 0xFFC02A9C /* Global Interrupt Flag Register */ +#define CAN_CONTROL 0xFFC02AA0 /* Master Control Register */ +#define CAN_INTR 0xFFC02AA4 /* Interrupt Pending Register */ +#define CAN_SFCMVER 0xFFC02AA8 /* Version Code Register */ +#define CAN_MBTD 0xFFC02AAC /* Mailbox Temporary Disable Feature */ +#define CAN_EWR 0xFFC02AB0 /* Programmable Warning Level */ +#define CAN_ESR 0xFFC02AB4 /* Error Status Register */ +#define CAN_UCREG 0xFFC02AC0 /* Universal Counter Register/Capture Register */ +#define CAN_UCCNT 0xFFC02AC4 /* Universal Counter */ +#define CAN_UCRC 0xFFC02AC8 /* Universal Counter Force Reload Register */ +#define CAN_UCCNF 0xFFC02ACC /* Universal Counter Configuration Register */ + +/* Mailbox Acceptance Masks */ +#define CAN_AM00L 0xFFC02B00 /* Mailbox 0 Low Acceptance Mask */ +#define CAN_AM00H 0xFFC02B04 /* Mailbox 0 High Acceptance Mask */ +#define CAN_AM01L 0xFFC02B08 /* Mailbox 1 Low Acceptance Mask */ +#define CAN_AM01H 0xFFC02B0C /* Mailbox 1 High Acceptance Mask */ +#define CAN_AM02L 0xFFC02B10 /* Mailbox 2 Low Acceptance Mask */ +#define CAN_AM02H 0xFFC02B14 /* Mailbox 2 High Acceptance Mask */ +#define CAN_AM03L 0xFFC02B18 /* Mailbox 3 Low Acceptance Mask */ +#define CAN_AM03H 0xFFC02B1C /* Mailbox 3 High Acceptance Mask */ +#define CAN_AM04L 0xFFC02B20 /* Mailbox 4 Low Acceptance Mask */ +#define CAN_AM04H 0xFFC02B24 /* Mailbox 4 High Acceptance Mask */ +#define CAN_AM05L 0xFFC02B28 /* Mailbox 5 Low Acceptance Mask */ +#define CAN_AM05H 0xFFC02B2C /* Mailbox 5 High Acceptance Mask */ +#define CAN_AM06L 0xFFC02B30 /* Mailbox 6 Low Acceptance Mask */ +#define CAN_AM06H 0xFFC02B34 /* Mailbox 6 High Acceptance Mask */ +#define CAN_AM07L 0xFFC02B38 /* Mailbox 7 Low Acceptance Mask */ +#define CAN_AM07H 0xFFC02B3C /* Mailbox 7 High Acceptance Mask */ +#define CAN_AM08L 0xFFC02B40 /* Mailbox 8 Low Acceptance Mask */ +#define CAN_AM08H 0xFFC02B44 /* Mailbox 8 High Acceptance Mask */ +#define CAN_AM09L 0xFFC02B48 /* Mailbox 9 Low Acceptance Mask */ +#define CAN_AM09H 0xFFC02B4C /* Mailbox 9 High Acceptance Mask */ +#define CAN_AM10L 0xFFC02B50 /* Mailbox 10 Low Acceptance Mask */ +#define CAN_AM10H 0xFFC02B54 /* Mailbox 10 High Acceptance Mask */ +#define CAN_AM11L 0xFFC02B58 /* Mailbox 11 Low Acceptance Mask */ +#define CAN_AM11H 0xFFC02B5C /* Mailbox 11 High Acceptance Mask */ +#define CAN_AM12L 0xFFC02B60 /* Mailbox 12 Low Acceptance Mask */ +#define CAN_AM12H 0xFFC02B64 /* Mailbox 12 High Acceptance Mask */ +#define CAN_AM13L 0xFFC02B68 /* Mailbox 13 Low Acceptance Mask */ +#define CAN_AM13H 0xFFC02B6C /* Mailbox 13 High Acceptance Mask */ +#define CAN_AM14L 0xFFC02B70 /* Mailbox 14 Low Acceptance Mask */ +#define CAN_AM14H 0xFFC02B74 /* Mailbox 14 High Acceptance Mask */ +#define CAN_AM15L 0xFFC02B78 /* Mailbox 15 Low Acceptance Mask */ +#define CAN_AM15H 0xFFC02B7C /* Mailbox 15 High Acceptance Mask */ + +#define CAN_AM16L 0xFFC02B80 /* Mailbox 16 Low Acceptance Mask */ +#define CAN_AM16H 0xFFC02B84 /* Mailbox 16 High Acceptance Mask */ +#define CAN_AM17L 0xFFC02B88 /* Mailbox 17 Low Acceptance Mask */ +#define CAN_AM17H 0xFFC02B8C /* Mailbox 17 High Acceptance Mask */ +#define CAN_AM18L 0xFFC02B90 /* Mailbox 18 Low Acceptance Mask */ +#define CAN_AM18H 0xFFC02B94 /* Mailbox 18 High Acceptance Mask */ +#define CAN_AM19L 0xFFC02B98 /* Mailbox 19 Low Acceptance Mask */ +#define CAN_AM19H 0xFFC02B9C /* Mailbox 19 High Acceptance Mask */ +#define CAN_AM20L 0xFFC02BA0 /* Mailbox 20 Low Acceptance Mask */ +#define CAN_AM20H 0xFFC02BA4 /* Mailbox 20 High Acceptance Mask */ +#define CAN_AM21L 0xFFC02BA8 /* Mailbox 21 Low Acceptance Mask */ +#define CAN_AM21H 0xFFC02BAC /* Mailbox 21 High Acceptance Mask */ +#define CAN_AM22L 0xFFC02BB0 /* Mailbox 22 Low Acceptance Mask */ +#define CAN_AM22H 0xFFC02BB4 /* Mailbox 22 High Acceptance Mask */ +#define CAN_AM23L 0xFFC02BB8 /* Mailbox 23 Low Acceptance Mask */ +#define CAN_AM23H 0xFFC02BBC /* Mailbox 23 High Acceptance Mask */ +#define CAN_AM24L 0xFFC02BC0 /* Mailbox 24 Low Acceptance Mask */ +#define CAN_AM24H 0xFFC02BC4 /* Mailbox 24 High Acceptance Mask */ +#define CAN_AM25L 0xFFC02BC8 /* Mailbox 25 Low Acceptance Mask */ +#define CAN_AM25H 0xFFC02BCC /* Mailbox 25 High Acceptance Mask */ +#define CAN_AM26L 0xFFC02BD0 /* Mailbox 26 Low Acceptance Mask */ +#define CAN_AM26H 0xFFC02BD4 /* Mailbox 26 High Acceptance Mask */ +#define CAN_AM27L 0xFFC02BD8 /* Mailbox 27 Low Acceptance Mask */ +#define CAN_AM27H 0xFFC02BDC /* Mailbox 27 High Acceptance Mask */ +#define CAN_AM28L 0xFFC02BE0 /* Mailbox 28 Low Acceptance Mask */ +#define CAN_AM28H 0xFFC02BE4 /* Mailbox 28 High Acceptance Mask */ +#define CAN_AM29L 0xFFC02BE8 /* Mailbox 29 Low Acceptance Mask */ +#define CAN_AM29H 0xFFC02BEC /* Mailbox 29 High Acceptance Mask */ +#define CAN_AM30L 0xFFC02BF0 /* Mailbox 30 Low Acceptance Mask */ +#define CAN_AM30H 0xFFC02BF4 /* Mailbox 30 High Acceptance Mask */ +#define CAN_AM31L 0xFFC02BF8 /* Mailbox 31 Low Acceptance Mask */ +#define CAN_AM31H 0xFFC02BFC /* Mailbox 31 High Acceptance Mask */ + +/* CAN Acceptance Mask Macros */ +#define CAN_AM_L(x) (CAN_AM00L+((x)*0x8)) +#define CAN_AM_H(x) (CAN_AM00H+((x)*0x8)) + +/* Mailbox Registers */ +#define CAN_MB00_DATA0 0xFFC02C00 /* Mailbox 0 Data Word 0 [15:0] Register */ +#define CAN_MB00_DATA1 0xFFC02C04 /* Mailbox 0 Data Word 1 [31:16] Register */ +#define CAN_MB00_DATA2 0xFFC02C08 /* Mailbox 0 Data Word 2 [47:32] Register */ +#define CAN_MB00_DATA3 0xFFC02C0C /* Mailbox 0 Data Word 3 [63:48] Register */ +#define CAN_MB00_LENGTH 0xFFC02C10 /* Mailbox 0 Data Length Code Register */ +#define CAN_MB00_TIMESTAMP 0xFFC02C14 /* Mailbox 0 Time Stamp Value Register */ +#define CAN_MB00_ID0 0xFFC02C18 /* Mailbox 0 Identifier Low Register */ +#define CAN_MB00_ID1 0xFFC02C1C /* Mailbox 0 Identifier High Register */ + +#define CAN_MB01_DATA0 0xFFC02C20 /* Mailbox 1 Data Word 0 [15:0] Register */ +#define CAN_MB01_DATA1 0xFFC02C24 /* Mailbox 1 Data Word 1 [31:16] Register */ +#define CAN_MB01_DATA2 0xFFC02C28 /* Mailbox 1 Data Word 2 [47:32] Register */ +#define CAN_MB01_DATA3 0xFFC02C2C /* Mailbox 1 Data Word 3 [63:48] Register */ +#define CAN_MB01_LENGTH 0xFFC02C30 /* Mailbox 1 Data Length Code Register */ +#define CAN_MB01_TIMESTAMP 0xFFC02C34 /* Mailbox 1 Time Stamp Value Register */ +#define CAN_MB01_ID0 0xFFC02C38 /* Mailbox 1 Identifier Low Register */ +#define CAN_MB01_ID1 0xFFC02C3C /* Mailbox 1 Identifier High Register */ + +#define CAN_MB02_DATA0 0xFFC02C40 /* Mailbox 2 Data Word 0 [15:0] Register */ +#define CAN_MB02_DATA1 0xFFC02C44 /* Mailbox 2 Data Word 1 [31:16] Register */ +#define CAN_MB02_DATA2 0xFFC02C48 /* Mailbox 2 Data Word 2 [47:32] Register */ +#define CAN_MB02_DATA3 0xFFC02C4C /* Mailbox 2 Data Word 3 [63:48] Register */ +#define CAN_MB02_LENGTH 0xFFC02C50 /* Mailbox 2 Data Length Code Register */ +#define CAN_MB02_TIMESTAMP 0xFFC02C54 /* Mailbox 2 Time Stamp Value Register */ +#define CAN_MB02_ID0 0xFFC02C58 /* Mailbox 2 Identifier Low Register */ +#define CAN_MB02_ID1 0xFFC02C5C /* Mailbox 2 Identifier High Register */ + +#define CAN_MB03_DATA0 0xFFC02C60 /* Mailbox 3 Data Word 0 [15:0] Register */ +#define CAN_MB03_DATA1 0xFFC02C64 /* Mailbox 3 Data Word 1 [31:16] Register */ +#define CAN_MB03_DATA2 0xFFC02C68 /* Mailbox 3 Data Word 2 [47:32] Register */ +#define CAN_MB03_DATA3 0xFFC02C6C /* Mailbox 3 Data Word 3 [63:48] Register */ +#define CAN_MB03_LENGTH 0xFFC02C70 /* Mailbox 3 Data Length Code Register */ +#define CAN_MB03_TIMESTAMP 0xFFC02C74 /* Mailbox 3 Time Stamp Value Register */ +#define CAN_MB03_ID0 0xFFC02C78 /* Mailbox 3 Identifier Low Register */ +#define CAN_MB03_ID1 0xFFC02C7C /* Mailbox 3 Identifier High Register */ + +#define CAN_MB04_DATA0 0xFFC02C80 /* Mailbox 4 Data Word 0 [15:0] Register */ +#define CAN_MB04_DATA1 0xFFC02C84 /* Mailbox 4 Data Word 1 [31:16] Register */ +#define CAN_MB04_DATA2 0xFFC02C88 /* Mailbox 4 Data Word 2 [47:32] Register */ +#define CAN_MB04_DATA3 0xFFC02C8C /* Mailbox 4 Data Word 3 [63:48] Register */ +#define CAN_MB04_LENGTH 0xFFC02C90 /* Mailbox 4 Data Length Code Register */ +#define CAN_MB04_TIMESTAMP 0xFFC02C94 /* Mailbox 4 Time Stamp Value Register */ +#define CAN_MB04_ID0 0xFFC02C98 /* Mailbox 4 Identifier Low Register */ +#define CAN_MB04_ID1 0xFFC02C9C /* Mailbox 4 Identifier High Register */ + +#define CAN_MB05_DATA0 0xFFC02CA0 /* Mailbox 5 Data Word 0 [15:0] Register */ +#define CAN_MB05_DATA1 0xFFC02CA4 /* Mailbox 5 Data Word 1 [31:16] Register */ +#define CAN_MB05_DATA2 0xFFC02CA8 /* Mailbox 5 Data Word 2 [47:32] Register */ +#define CAN_MB05_DATA3 0xFFC02CAC /* Mailbox 5 Data Word 3 [63:48] Register */ +#define CAN_MB05_LENGTH 0xFFC02CB0 /* Mailbox 5 Data Length Code Register */ +#define CAN_MB05_TIMESTAMP 0xFFC02CB4 /* Mailbox 5 Time Stamp Value Register */ +#define CAN_MB05_ID0 0xFFC02CB8 /* Mailbox 5 Identifier Low Register */ +#define CAN_MB05_ID1 0xFFC02CBC /* Mailbox 5 Identifier High Register */ + +#define CAN_MB06_DATA0 0xFFC02CC0 /* Mailbox 6 Data Word 0 [15:0] Register */ +#define CAN_MB06_DATA1 0xFFC02CC4 /* Mailbox 6 Data Word 1 [31:16] Register */ +#define CAN_MB06_DATA2 0xFFC02CC8 /* Mailbox 6 Data Word 2 [47:32] Register */ +#define CAN_MB06_DATA3 0xFFC02CCC /* Mailbox 6 Data Word 3 [63:48] Register */ +#define CAN_MB06_LENGTH 0xFFC02CD0 /* Mailbox 6 Data Length Code Register */ +#define CAN_MB06_TIMESTAMP 0xFFC02CD4 /* Mailbox 6 Time Stamp Value Register */ +#define CAN_MB06_ID0 0xFFC02CD8 /* Mailbox 6 Identifier Low Register */ +#define CAN_MB06_ID1 0xFFC02CDC /* Mailbox 6 Identifier High Register */ + +#define CAN_MB07_DATA0 0xFFC02CE0 /* Mailbox 7 Data Word 0 [15:0] Register */ +#define CAN_MB07_DATA1 0xFFC02CE4 /* Mailbox 7 Data Word 1 [31:16] Register */ +#define CAN_MB07_DATA2 0xFFC02CE8 /* Mailbox 7 Data Word 2 [47:32] Register */ +#define CAN_MB07_DATA3 0xFFC02CEC /* Mailbox 7 Data Word 3 [63:48] Register */ +#define CAN_MB07_LENGTH 0xFFC02CF0 /* Mailbox 7 Data Length Code Register */ +#define CAN_MB07_TIMESTAMP 0xFFC02CF4 /* Mailbox 7 Time Stamp Value Register */ +#define CAN_MB07_ID0 0xFFC02CF8 /* Mailbox 7 Identifier Low Register */ +#define CAN_MB07_ID1 0xFFC02CFC /* Mailbox 7 Identifier High Register */ + +#define CAN_MB08_DATA0 0xFFC02D00 /* Mailbox 8 Data Word 0 [15:0] Register */ +#define CAN_MB08_DATA1 0xFFC02D04 /* Mailbox 8 Data Word 1 [31:16] Register */ +#define CAN_MB08_DATA2 0xFFC02D08 /* Mailbox 8 Data Word 2 [47:32] Register */ +#define CAN_MB08_DATA3 0xFFC02D0C /* Mailbox 8 Data Word 3 [63:48] Register */ +#define CAN_MB08_LENGTH 0xFFC02D10 /* Mailbox 8 Data Length Code Register */ +#define CAN_MB08_TIMESTAMP 0xFFC02D14 /* Mailbox 8 Time Stamp Value Register */ +#define CAN_MB08_ID0 0xFFC02D18 /* Mailbox 8 Identifier Low Register */ +#define CAN_MB08_ID1 0xFFC02D1C /* Mailbox 8 Identifier High Register */ + +#define CAN_MB09_DATA0 0xFFC02D20 /* Mailbox 9 Data Word 0 [15:0] Register */ +#define CAN_MB09_DATA1 0xFFC02D24 /* Mailbox 9 Data Word 1 [31:16] Register */ +#define CAN_MB09_DATA2 0xFFC02D28 /* Mailbox 9 Data Word 2 [47:32] Register */ +#define CAN_MB09_DATA3 0xFFC02D2C /* Mailbox 9 Data Word 3 [63:48] Register */ +#define CAN_MB09_LENGTH 0xFFC02D30 /* Mailbox 9 Data Length Code Register */ +#define CAN_MB09_TIMESTAMP 0xFFC02D34 /* Mailbox 9 Time Stamp Value Register */ +#define CAN_MB09_ID0 0xFFC02D38 /* Mailbox 9 Identifier Low Register */ +#define CAN_MB09_ID1 0xFFC02D3C /* Mailbox 9 Identifier High Register */ + +#define CAN_MB10_DATA0 0xFFC02D40 /* Mailbox 10 Data Word 0 [15:0] Register */ +#define CAN_MB10_DATA1 0xFFC02D44 /* Mailbox 10 Data Word 1 [31:16] Register */ +#define CAN_MB10_DATA2 0xFFC02D48 /* Mailbox 10 Data Word 2 [47:32] Register */ +#define CAN_MB10_DATA3 0xFFC02D4C /* Mailbox 10 Data Word 3 [63:48] Register */ +#define CAN_MB10_LENGTH 0xFFC02D50 /* Mailbox 10 Data Length Code Register */ +#define CAN_MB10_TIMESTAMP 0xFFC02D54 /* Mailbox 10 Time Stamp Value Register */ +#define CAN_MB10_ID0 0xFFC02D58 /* Mailbox 10 Identifier Low Register */ +#define CAN_MB10_ID1 0xFFC02D5C /* Mailbox 10 Identifier High Register */ + +#define CAN_MB11_DATA0 0xFFC02D60 /* Mailbox 11 Data Word 0 [15:0] Register */ +#define CAN_MB11_DATA1 0xFFC02D64 /* Mailbox 11 Data Word 1 [31:16] Register */ +#define CAN_MB11_DATA2 0xFFC02D68 /* Mailbox 11 Data Word 2 [47:32] Register */ +#define CAN_MB11_DATA3 0xFFC02D6C /* Mailbox 11 Data Word 3 [63:48] Register */ +#define CAN_MB11_LENGTH 0xFFC02D70 /* Mailbox 11 Data Length Code Register */ +#define CAN_MB11_TIMESTAMP 0xFFC02D74 /* Mailbox 11 Time Stamp Value Register */ +#define CAN_MB11_ID0 0xFFC02D78 /* Mailbox 11 Identifier Low Register */ +#define CAN_MB11_ID1 0xFFC02D7C /* Mailbox 11 Identifier High Register */ + +#define CAN_MB12_DATA0 0xFFC02D80 /* Mailbox 12 Data Word 0 [15:0] Register */ +#define CAN_MB12_DATA1 0xFFC02D84 /* Mailbox 12 Data Word 1 [31:16] Register */ +#define CAN_MB12_DATA2 0xFFC02D88 /* Mailbox 12 Data Word 2 [47:32] Register */ +#define CAN_MB12_DATA3 0xFFC02D8C /* Mailbox 12 Data Word 3 [63:48] Register */ +#define CAN_MB12_LENGTH 0xFFC02D90 /* Mailbox 12 Data Length Code Register */ +#define CAN_MB12_TIMESTAMP 0xFFC02D94 /* Mailbox 12 Time Stamp Value Register */ +#define CAN_MB12_ID0 0xFFC02D98 /* Mailbox 12 Identifier Low Register */ +#define CAN_MB12_ID1 0xFFC02D9C /* Mailbox 12 Identifier High Register */ + +#define CAN_MB13_DATA0 0xFFC02DA0 /* Mailbox 13 Data Word 0 [15:0] Register */ +#define CAN_MB13_DATA1 0xFFC02DA4 /* Mailbox 13 Data Word 1 [31:16] Register */ +#define CAN_MB13_DATA2 0xFFC02DA8 /* Mailbox 13 Data Word 2 [47:32] Register */ +#define CAN_MB13_DATA3 0xFFC02DAC /* Mailbox 13 Data Word 3 [63:48] Register */ +#define CAN_MB13_LENGTH 0xFFC02DB0 /* Mailbox 13 Data Length Code Register */ +#define CAN_MB13_TIMESTAMP 0xFFC02DB4 /* Mailbox 13 Time Stamp Value Register */ +#define CAN_MB13_ID0 0xFFC02DB8 /* Mailbox 13 Identifier Low Register */ +#define CAN_MB13_ID1 0xFFC02DBC /* Mailbox 13 Identifier High Register */ + +#define CAN_MB14_DATA0 0xFFC02DC0 /* Mailbox 14 Data Word 0 [15:0] Register */ +#define CAN_MB14_DATA1 0xFFC02DC4 /* Mailbox 14 Data Word 1 [31:16] Register */ +#define CAN_MB14_DATA2 0xFFC02DC8 /* Mailbox 14 Data Word 2 [47:32] Register */ +#define CAN_MB14_DATA3 0xFFC02DCC /* Mailbox 14 Data Word 3 [63:48] Register */ +#define CAN_MB14_LENGTH 0xFFC02DD0 /* Mailbox 14 Data Length Code Register */ +#define CAN_MB14_TIMESTAMP 0xFFC02DD4 /* Mailbox 14 Time Stamp Value Register */ +#define CAN_MB14_ID0 0xFFC02DD8 /* Mailbox 14 Identifier Low Register */ +#define CAN_MB14_ID1 0xFFC02DDC /* Mailbox 14 Identifier High Register */ + +#define CAN_MB15_DATA0 0xFFC02DE0 /* Mailbox 15 Data Word 0 [15:0] Register */ +#define CAN_MB15_DATA1 0xFFC02DE4 /* Mailbox 15 Data Word 1 [31:16] Register */ +#define CAN_MB15_DATA2 0xFFC02DE8 /* Mailbox 15 Data Word 2 [47:32] Register */ +#define CAN_MB15_DATA3 0xFFC02DEC /* Mailbox 15 Data Word 3 [63:48] Register */ +#define CAN_MB15_LENGTH 0xFFC02DF0 /* Mailbox 15 Data Length Code Register */ +#define CAN_MB15_TIMESTAMP 0xFFC02DF4 /* Mailbox 15 Time Stamp Value Register */ +#define CAN_MB15_ID0 0xFFC02DF8 /* Mailbox 15 Identifier Low Register */ +#define CAN_MB15_ID1 0xFFC02DFC /* Mailbox 15 Identifier High Register */ + +#define CAN_MB16_DATA0 0xFFC02E00 /* Mailbox 16 Data Word 0 [15:0] Register */ +#define CAN_MB16_DATA1 0xFFC02E04 /* Mailbox 16 Data Word 1 [31:16] Register */ +#define CAN_MB16_DATA2 0xFFC02E08 /* Mailbox 16 Data Word 2 [47:32] Register */ +#define CAN_MB16_DATA3 0xFFC02E0C /* Mailbox 16 Data Word 3 [63:48] Register */ +#define CAN_MB16_LENGTH 0xFFC02E10 /* Mailbox 16 Data Length Code Register */ +#define CAN_MB16_TIMESTAMP 0xFFC02E14 /* Mailbox 16 Time Stamp Value Register */ +#define CAN_MB16_ID0 0xFFC02E18 /* Mailbox 16 Identifier Low Register */ +#define CAN_MB16_ID1 0xFFC02E1C /* Mailbox 16 Identifier High Register */ + +#define CAN_MB17_DATA0 0xFFC02E20 /* Mailbox 17 Data Word 0 [15:0] Register */ +#define CAN_MB17_DATA1 0xFFC02E24 /* Mailbox 17 Data Word 1 [31:16] Register */ +#define CAN_MB17_DATA2 0xFFC02E28 /* Mailbox 17 Data Word 2 [47:32] Register */ +#define CAN_MB17_DATA3 0xFFC02E2C /* Mailbox 17 Data Word 3 [63:48] Register */ +#define CAN_MB17_LENGTH 0xFFC02E30 /* Mailbox 17 Data Length Code Register */ +#define CAN_MB17_TIMESTAMP 0xFFC02E34 /* Mailbox 17 Time Stamp Value Register */ +#define CAN_MB17_ID0 0xFFC02E38 /* Mailbox 17 Identifier Low Register */ +#define CAN_MB17_ID1 0xFFC02E3C /* Mailbox 17 Identifier High Register */ + +#define CAN_MB18_DATA0 0xFFC02E40 /* Mailbox 18 Data Word 0 [15:0] Register */ +#define CAN_MB18_DATA1 0xFFC02E44 /* Mailbox 18 Data Word 1 [31:16] Register */ +#define CAN_MB18_DATA2 0xFFC02E48 /* Mailbox 18 Data Word 2 [47:32] Register */ +#define CAN_MB18_DATA3 0xFFC02E4C /* Mailbox 18 Data Word 3 [63:48] Register */ +#define CAN_MB18_LENGTH 0xFFC02E50 /* Mailbox 18 Data Length Code Register */ +#define CAN_MB18_TIMESTAMP 0xFFC02E54 /* Mailbox 18 Time Stamp Value Register */ +#define CAN_MB18_ID0 0xFFC02E58 /* Mailbox 18 Identifier Low Register */ +#define CAN_MB18_ID1 0xFFC02E5C /* Mailbox 18 Identifier High Register */ + +#define CAN_MB19_DATA0 0xFFC02E60 /* Mailbox 19 Data Word 0 [15:0] Register */ +#define CAN_MB19_DATA1 0xFFC02E64 /* Mailbox 19 Data Word 1 [31:16] Register */ +#define CAN_MB19_DATA2 0xFFC02E68 /* Mailbox 19 Data Word 2 [47:32] Register */ +#define CAN_MB19_DATA3 0xFFC02E6C /* Mailbox 19 Data Word 3 [63:48] Register */ +#define CAN_MB19_LENGTH 0xFFC02E70 /* Mailbox 19 Data Length Code Register */ +#define CAN_MB19_TIMESTAMP 0xFFC02E74 /* Mailbox 19 Time Stamp Value Register */ +#define CAN_MB19_ID0 0xFFC02E78 /* Mailbox 19 Identifier Low Register */ +#define CAN_MB19_ID1 0xFFC02E7C /* Mailbox 19 Identifier High Register */ + +#define CAN_MB20_DATA0 0xFFC02E80 /* Mailbox 20 Data Word 0 [15:0] Register */ +#define CAN_MB20_DATA1 0xFFC02E84 /* Mailbox 20 Data Word 1 [31:16] Register */ +#define CAN_MB20_DATA2 0xFFC02E88 /* Mailbox 20 Data Word 2 [47:32] Register */ +#define CAN_MB20_DATA3 0xFFC02E8C /* Mailbox 20 Data Word 3 [63:48] Register */ +#define CAN_MB20_LENGTH 0xFFC02E90 /* Mailbox 20 Data Length Code Register */ +#define CAN_MB20_TIMESTAMP 0xFFC02E94 /* Mailbox 20 Time Stamp Value Register */ +#define CAN_MB20_ID0 0xFFC02E98 /* Mailbox 20 Identifier Low Register */ +#define CAN_MB20_ID1 0xFFC02E9C /* Mailbox 20 Identifier High Register */ + +#define CAN_MB21_DATA0 0xFFC02EA0 /* Mailbox 21 Data Word 0 [15:0] Register */ +#define CAN_MB21_DATA1 0xFFC02EA4 /* Mailbox 21 Data Word 1 [31:16] Register */ +#define CAN_MB21_DATA2 0xFFC02EA8 /* Mailbox 21 Data Word 2 [47:32] Register */ +#define CAN_MB21_DATA3 0xFFC02EAC /* Mailbox 21 Data Word 3 [63:48] Register */ +#define CAN_MB21_LENGTH 0xFFC02EB0 /* Mailbox 21 Data Length Code Register */ +#define CAN_MB21_TIMESTAMP 0xFFC02EB4 /* Mailbox 21 Time Stamp Value Register */ +#define CAN_MB21_ID0 0xFFC02EB8 /* Mailbox 21 Identifier Low Register */ +#define CAN_MB21_ID1 0xFFC02EBC /* Mailbox 21 Identifier High Register */ + +#define CAN_MB22_DATA0 0xFFC02EC0 /* Mailbox 22 Data Word 0 [15:0] Register */ +#define CAN_MB22_DATA1 0xFFC02EC4 /* Mailbox 22 Data Word 1 [31:16] Register */ +#define CAN_MB22_DATA2 0xFFC02EC8 /* Mailbox 22 Data Word 2 [47:32] Register */ +#define CAN_MB22_DATA3 0xFFC02ECC /* Mailbox 22 Data Word 3 [63:48] Register */ +#define CAN_MB22_LENGTH 0xFFC02ED0 /* Mailbox 22 Data Length Code Register */ +#define CAN_MB22_TIMESTAMP 0xFFC02ED4 /* Mailbox 22 Time Stamp Value Register */ +#define CAN_MB22_ID0 0xFFC02ED8 /* Mailbox 22 Identifier Low Register */ +#define CAN_MB22_ID1 0xFFC02EDC /* Mailbox 22 Identifier High Register */ + +#define CAN_MB23_DATA0 0xFFC02EE0 /* Mailbox 23 Data Word 0 [15:0] Register */ +#define CAN_MB23_DATA1 0xFFC02EE4 /* Mailbox 23 Data Word 1 [31:16] Register */ +#define CAN_MB23_DATA2 0xFFC02EE8 /* Mailbox 23 Data Word 2 [47:32] Register */ +#define CAN_MB23_DATA3 0xFFC02EEC /* Mailbox 23 Data Word 3 [63:48] Register */ +#define CAN_MB23_LENGTH 0xFFC02EF0 /* Mailbox 23 Data Length Code Register */ +#define CAN_MB23_TIMESTAMP 0xFFC02EF4 /* Mailbox 23 Time Stamp Value Register */ +#define CAN_MB23_ID0 0xFFC02EF8 /* Mailbox 23 Identifier Low Register */ +#define CAN_MB23_ID1 0xFFC02EFC /* Mailbox 23 Identifier High Register */ + +#define CAN_MB24_DATA0 0xFFC02F00 /* Mailbox 24 Data Word 0 [15:0] Register */ +#define CAN_MB24_DATA1 0xFFC02F04 /* Mailbox 24 Data Word 1 [31:16] Register */ +#define CAN_MB24_DATA2 0xFFC02F08 /* Mailbox 24 Data Word 2 [47:32] Register */ +#define CAN_MB24_DATA3 0xFFC02F0C /* Mailbox 24 Data Word 3 [63:48] Register */ +#define CAN_MB24_LENGTH 0xFFC02F10 /* Mailbox 24 Data Length Code Register */ +#define CAN_MB24_TIMESTAMP 0xFFC02F14 /* Mailbox 24 Time Stamp Value Register */ +#define CAN_MB24_ID0 0xFFC02F18 /* Mailbox 24 Identifier Low Register */ +#define CAN_MB24_ID1 0xFFC02F1C /* Mailbox 24 Identifier High Register */ + +#define CAN_MB25_DATA0 0xFFC02F20 /* Mailbox 25 Data Word 0 [15:0] Register */ +#define CAN_MB25_DATA1 0xFFC02F24 /* Mailbox 25 Data Word 1 [31:16] Register */ +#define CAN_MB25_DATA2 0xFFC02F28 /* Mailbox 25 Data Word 2 [47:32] Register */ +#define CAN_MB25_DATA3 0xFFC02F2C /* Mailbox 25 Data Word 3 [63:48] Register */ +#define CAN_MB25_LENGTH 0xFFC02F30 /* Mailbox 25 Data Length Code Register */ +#define CAN_MB25_TIMESTAMP 0xFFC02F34 /* Mailbox 25 Time Stamp Value Register */ +#define CAN_MB25_ID0 0xFFC02F38 /* Mailbox 25 Identifier Low Register */ +#define CAN_MB25_ID1 0xFFC02F3C /* Mailbox 25 Identifier High Register */ + +#define CAN_MB26_DATA0 0xFFC02F40 /* Mailbox 26 Data Word 0 [15:0] Register */ +#define CAN_MB26_DATA1 0xFFC02F44 /* Mailbox 26 Data Word 1 [31:16] Register */ +#define CAN_MB26_DATA2 0xFFC02F48 /* Mailbox 26 Data Word 2 [47:32] Register */ +#define CAN_MB26_DATA3 0xFFC02F4C /* Mailbox 26 Data Word 3 [63:48] Register */ +#define CAN_MB26_LENGTH 0xFFC02F50 /* Mailbox 26 Data Length Code Register */ +#define CAN_MB26_TIMESTAMP 0xFFC02F54 /* Mailbox 26 Time Stamp Value Register */ +#define CAN_MB26_ID0 0xFFC02F58 /* Mailbox 26 Identifier Low Register */ +#define CAN_MB26_ID1 0xFFC02F5C /* Mailbox 26 Identifier High Register */ + +#define CAN_MB27_DATA0 0xFFC02F60 /* Mailbox 27 Data Word 0 [15:0] Register */ +#define CAN_MB27_DATA1 0xFFC02F64 /* Mailbox 27 Data Word 1 [31:16] Register */ +#define CAN_MB27_DATA2 0xFFC02F68 /* Mailbox 27 Data Word 2 [47:32] Register */ +#define CAN_MB27_DATA3 0xFFC02F6C /* Mailbox 27 Data Word 3 [63:48] Register */ +#define CAN_MB27_LENGTH 0xFFC02F70 /* Mailbox 27 Data Length Code Register */ +#define CAN_MB27_TIMESTAMP 0xFFC02F74 /* Mailbox 27 Time Stamp Value Register */ +#define CAN_MB27_ID0 0xFFC02F78 /* Mailbox 27 Identifier Low Register */ +#define CAN_MB27_ID1 0xFFC02F7C /* Mailbox 27 Identifier High Register */ + +#define CAN_MB28_DATA0 0xFFC02F80 /* Mailbox 28 Data Word 0 [15:0] Register */ +#define CAN_MB28_DATA1 0xFFC02F84 /* Mailbox 28 Data Word 1 [31:16] Register */ +#define CAN_MB28_DATA2 0xFFC02F88 /* Mailbox 28 Data Word 2 [47:32] Register */ +#define CAN_MB28_DATA3 0xFFC02F8C /* Mailbox 28 Data Word 3 [63:48] Register */ +#define CAN_MB28_LENGTH 0xFFC02F90 /* Mailbox 28 Data Length Code Register */ +#define CAN_MB28_TIMESTAMP 0xFFC02F94 /* Mailbox 28 Time Stamp Value Register */ +#define CAN_MB28_ID0 0xFFC02F98 /* Mailbox 28 Identifier Low Register */ +#define CAN_MB28_ID1 0xFFC02F9C /* Mailbox 28 Identifier High Register */ + +#define CAN_MB29_DATA0 0xFFC02FA0 /* Mailbox 29 Data Word 0 [15:0] Register */ +#define CAN_MB29_DATA1 0xFFC02FA4 /* Mailbox 29 Data Word 1 [31:16] Register */ +#define CAN_MB29_DATA2 0xFFC02FA8 /* Mailbox 29 Data Word 2 [47:32] Register */ +#define CAN_MB29_DATA3 0xFFC02FAC /* Mailbox 29 Data Word 3 [63:48] Register */ +#define CAN_MB29_LENGTH 0xFFC02FB0 /* Mailbox 29 Data Length Code Register */ +#define CAN_MB29_TIMESTAMP 0xFFC02FB4 /* Mailbox 29 Time Stamp Value Register */ +#define CAN_MB29_ID0 0xFFC02FB8 /* Mailbox 29 Identifier Low Register */ +#define CAN_MB29_ID1 0xFFC02FBC /* Mailbox 29 Identifier High Register */ + +#define CAN_MB30_DATA0 0xFFC02FC0 /* Mailbox 30 Data Word 0 [15:0] Register */ +#define CAN_MB30_DATA1 0xFFC02FC4 /* Mailbox 30 Data Word 1 [31:16] Register */ +#define CAN_MB30_DATA2 0xFFC02FC8 /* Mailbox 30 Data Word 2 [47:32] Register */ +#define CAN_MB30_DATA3 0xFFC02FCC /* Mailbox 30 Data Word 3 [63:48] Register */ +#define CAN_MB30_LENGTH 0xFFC02FD0 /* Mailbox 30 Data Length Code Register */ +#define CAN_MB30_TIMESTAMP 0xFFC02FD4 /* Mailbox 30 Time Stamp Value Register */ +#define CAN_MB30_ID0 0xFFC02FD8 /* Mailbox 30 Identifier Low Register */ +#define CAN_MB30_ID1 0xFFC02FDC /* Mailbox 30 Identifier High Register */ + +#define CAN_MB31_DATA0 0xFFC02FE0 /* Mailbox 31 Data Word 0 [15:0] Register */ +#define CAN_MB31_DATA1 0xFFC02FE4 /* Mailbox 31 Data Word 1 [31:16] Register */ +#define CAN_MB31_DATA2 0xFFC02FE8 /* Mailbox 31 Data Word 2 [47:32] Register */ +#define CAN_MB31_DATA3 0xFFC02FEC /* Mailbox 31 Data Word 3 [63:48] Register */ +#define CAN_MB31_LENGTH 0xFFC02FF0 /* Mailbox 31 Data Length Code Register */ +#define CAN_MB31_TIMESTAMP 0xFFC02FF4 /* Mailbox 31 Time Stamp Value Register */ +#define CAN_MB31_ID0 0xFFC02FF8 /* Mailbox 31 Identifier Low Register */ +#define CAN_MB31_ID1 0xFFC02FFC /* Mailbox 31 Identifier High Register */ + +/* CAN Mailbox Area Macros */ +#define CAN_MB_ID1(x) (CAN_MB00_ID1+((x)*0x20)) +#define CAN_MB_ID0(x) (CAN_MB00_ID0+((x)*0x20)) +#define CAN_MB_TIMESTAMP(x) (CAN_MB00_TIMESTAMP+((x)*0x20)) +#define CAN_MB_LENGTH(x) (CAN_MB00_LENGTH+((x)*0x20)) +#define CAN_MB_DATA3(x) (CAN_MB00_DATA3+((x)*0x20)) +#define CAN_MB_DATA2(x) (CAN_MB00_DATA2+((x)*0x20)) +#define CAN_MB_DATA1(x) (CAN_MB00_DATA1+((x)*0x20)) +#define CAN_MB_DATA0(x) (CAN_MB00_DATA0+((x)*0x20)) + +/* Pin Control Registers (0xFFC03200 - 0xFFC032FF) */ +#define PORTF_FER 0xFFC03200 /* Port F Function Enable Register (Alternate/Flag*) */ +#define PORTG_FER 0xFFC03204 /* Port G Function Enable Register (Alternate/Flag*) */ +#define PORTH_FER 0xFFC03208 /* Port H Function Enable Register (Alternate/Flag*) */ +#define PORT_MUX 0xFFC0320C /* Port Multiplexer Control Register */ + +/* Handshake MDMA Registers (0xFFC03300 - 0xFFC033FF) */ +#define HMDMA0_CONTROL 0xFFC03300 /* Handshake MDMA0 Control Register */ +#define HMDMA0_ECINIT 0xFFC03304 /* HMDMA0 Initial Edge Count Register */ +#define HMDMA0_BCINIT 0xFFC03308 /* HMDMA0 Initial Block Count Register */ +#define HMDMA0_ECURGENT 0xFFC0330C /* HMDMA0 Urgent Edge Count Threshhold Register */ +#define HMDMA0_ECOVERFLOW 0xFFC03310 /* HMDMA0 Edge Count Overflow Interrupt Register */ +#define HMDMA0_ECOUNT 0xFFC03314 /* HMDMA0 Current Edge Count Register */ +#define HMDMA0_BCOUNT 0xFFC03318 /* HMDMA0 Current Block Count Register */ + +#define HMDMA1_CONTROL 0xFFC03340 /* Handshake MDMA1 Control Register */ +#define HMDMA1_ECINIT 0xFFC03344 /* HMDMA1 Initial Edge Count Register */ +#define HMDMA1_BCINIT 0xFFC03348 /* HMDMA1 Initial Block Count Register */ +#define HMDMA1_ECURGENT 0xFFC0334C /* HMDMA1 Urgent Edge Count Threshhold Register */ +#define HMDMA1_ECOVERFLOW 0xFFC03350 /* HMDMA1 Edge Count Overflow Interrupt Register */ +#define HMDMA1_ECOUNT 0xFFC03354 /* HMDMA1 Current Edge Count Register */ +#define HMDMA1_BCOUNT 0xFFC03358 /* HMDMA1 Current Block Count Register */ + +/* + * System MMR Register Bits And Macros + * + * Disclaimer: All macros are intended to make C and Assembly code more readable. + * Use these macros carefully, as any that do left shifts for field + * depositing will result in the lower order bits being destroyed. Any + * macro that shifts left to properly position the bit-field should be + * used as part of an OR to initialize a register and NOT as a dynamic + * modifier UNLESS the lower order bits are saved and ORed back in when + * the macro is used. + */ +/* + * PLL AND RESET MASKS + * PLL_CTL Masks + */ +#define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */ +#define PLL_OFF 0x0002 /* PLL Not Powered */ +#define STOPCK 0x0008 /* Core Clock Off */ +#define PDWN 0x0020 /* Enter Deep Sleep Mode */ +#define IN_DELAY 0x0040 /* Add 200ps Delay To EBIU Input Latches */ +#define OUT_DELAY 0x0080 /* Add 200ps Delay To EBIU Output Signals */ +#define BYPASS 0x0100 /* Bypass the PLL */ +#define MSEL 0x7E00 /* Multiplier Select For CCLK/VCO Factors */ +/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits) */ +#define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */ + +/* PLL_DIV Masks */ +#define SSEL 0x000F /* System Select */ +#define CSEL 0x0030 /* Core Select */ +#define CSEL_DIV1 0x0000 /* CCLK = VCO / 1 */ +#define CSEL_DIV2 0x0010 /* CCLK = VCO / 2 */ +#define CSEL_DIV4 0x0020 /* CCLK = VCO / 4 */ +#define CSEL_DIV8 0x0030 /* CCLK = VCO / 8 */ + +#define CCLK_DIV1 CSEL_DIV1 +#define CCLK_DIV2 CSEL_DIV2 +#define CCLK_DIV4 CSEL_DIV4 +#define CCLK_DIV8 CSEL_DIV8 +/* PLL_DIV Macros */ +#define SET_SSEL(x) ((x)&0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */ + +/* VR_CTL Masks */ +#define FREQ 0x0003 /* Switching Oscillator Frequency For Regulator */ +#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */ +#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */ +#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */ +#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */ + +#define GAIN 0x000C /* Voltage Level Gain */ +#define GAIN_5 0x0000 /* GAIN = 5 */ +#define GAIN_10 0x0004 /* GAIN = 10 */ +#define GAIN_20 0x0008 /* GAIN = 20 */ +#define GAIN_50 0x000C /* GAIN = 50 */ + +#define VLEV 0x00F0 /* Internal Voltage Level */ +#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */ +#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */ +#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */ +#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */ +#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */ +#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */ +#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */ +#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */ +#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */ +#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */ + +#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */ +#define CANWE 0x0200 /* Enable CAN Wakeup From Hibernate */ +#define PHYWE 0x0400 /* Enable PHY Wakeup From Hibernate */ +#define CLKBUFOE 0x4000 /* CLKIN Buffer Output Enable */ +#define PHYCLKOE CLKBUFOE /* Alternative legacy name for the above */ +#define CKELOW 0x8000 /* Enable Drive CKE Low During Reset */ + +/* PLL_STAT Masks */ +#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */ +#define FULL_ON 0x0002 /* Processor In Full On Mode */ +#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */ +#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */ + +/* SWRST Masks */ +#define SYSTEM_RESET 0x0007 /* Initiates A System Software Reset */ +#define DOUBLE_FAULT 0x0008 /* Core Double Fault Causes Reset */ +#define RESET_DOUBLE 0x2000 /* SW Reset Generated By Core Double-Fault */ +#define RESET_WDOG 0x4000 /* SW Reset Generated By Watchdog Timer */ +#define RESET_SOFTWARE 0x8000 /* SW Reset Occurred Since Last Read Of SWRST */ + +/* SYSCR Masks */ +#define BMODE 0x0007 /* Boot Mode - Latched During HW Reset From Mode Pins */ +#define NOBOOT 0x0010 /* Execute From L1 or ASYNC Bank 0 When BMODE = 0 */ + +/* + * SYSTEM INTERRUPT CONTROLLER MASKS + */ +/* Peripheral Masks For SIC_ISR, SIC_IWR, SIC_IMASK */ +#define IRQ_PLL_WAKEUP 0x00000001 /* PLL Wakeup Interrupt */ +#define IRQ_ERROR1 0x00000002 /* Error Interrupt (DMA, DMARx Block, DMARx Overflow) */ +#define IRQ_ERROR2 0x00000004 /* Error Interrupt (CAN, Ethernet, SPORTx, PPI, SPI, UARTx) */ +#define IRQ_RTC 0x00000008 /* Real Time Clock Interrupt */ +#define IRQ_DMA0 0x00000010 /* DMA Channel 0 (PPI) Interrupt */ +#define IRQ_DMA3 0x00000020 /* DMA Channel 3 (SPORT0 RX) Interrupt */ +#define IRQ_DMA4 0x00000040 /* DMA Channel 4 (SPORT0 TX) Interrupt */ +#define IRQ_DMA5 0x00000080 /* DMA Channel 5 (SPORT1 RX) Interrupt */ + +#define IRQ_DMA6 0x00000100 /* DMA Channel 6 (SPORT1 TX) Interrupt */ +#define IRQ_TWI 0x00000200 /* TWI Interrupt */ +#define IRQ_DMA7 0x00000400 /* DMA Channel 7 (SPI) Interrupt */ +#define IRQ_DMA8 0x00000800 /* DMA Channel 8 (UART0 RX) Interrupt */ +#define IRQ_DMA9 0x00001000 /* DMA Channel 9 (UART0 TX) Interrupt */ +#define IRQ_DMA10 0x00002000 /* DMA Channel 10 (UART1 RX) Interrupt */ +#define IRQ_DMA11 0x00004000 /* DMA Channel 11 (UART1 TX) Interrupt */ +#define IRQ_CAN_RX 0x00008000 /* CAN Receive Interrupt */ + +#define IRQ_CAN_TX 0x00010000 /* CAN Transmit Interrupt */ +#define IRQ_DMA1 0x00020000 /* DMA Channel 1 (Ethernet RX) Interrupt */ +#define IRQ_PFA_PORTH 0x00020000 /* PF Port H (PF47:32) Interrupt A */ +#define IRQ_DMA2 0x00040000 /* DMA Channel 2 (Ethernet TX) Interrupt */ +#define IRQ_PFB_PORTH 0x00040000 /* PF Port H (PF47:32) Interrupt B */ +#define IRQ_TIMER0 0x00080000 /* Timer 0 Interrupt */ +#define IRQ_TIMER1 0x00100000 /* Timer 1 Interrupt */ +#define IRQ_TIMER2 0x00200000 /* Timer 2 Interrupt */ +#define IRQ_TIMER3 0x00400000 /* Timer 3 Interrupt */ +#define IRQ_TIMER4 0x00800000 /* Timer 4 Interrupt */ + +#define IRQ_TIMER5 0x01000000 /* Timer 5 Interrupt */ +#define IRQ_TIMER6 0x02000000 /* Timer 6 Interrupt */ +#define IRQ_TIMER7 0x04000000 /* Timer 7 Interrupt */ +#define IRQ_PFA_PORTFG 0x08000000 /* PF Ports F&G (PF31:0) Interrupt A */ +#define IRQ_PFB_PORTF 0x80000000 /* PF Port F (PF15:0) Interrupt B */ +#define IRQ_DMA12 0x20000000 /* DMA Channels 12 (MDMA1 Source) RX Interrupt */ +#define IRQ_DMA13 0x20000000 /* DMA Channels 13 (MDMA1 Destination) TX Interrupt */ +#define IRQ_DMA14 0x40000000 /* DMA Channels 14 (MDMA0 Source) RX Interrupt */ +#define IRQ_DMA15 0x40000000 /* DMA Channels 15 (MDMA0 Destination) TX Interrupt */ +#define IRQ_WDOG 0x80000000 /* Software Watchdog Timer Interrupt */ +#define IRQ_PFB_PORTG 0x10000000 /* PF Port G (PF31:16) Interrupt B */ + +/* SIC_IAR0 Macros */ +#define P0_IVG(x) (((x)&0xF)-7) /* Peripheral #0 assigned IVG #x */ +#define P1_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #1 assigned IVG #x */ +#define P2_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #2 assigned IVG #x */ +#define P3_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #3 assigned IVG #x */ +#define P4_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #4 assigned IVG #x */ +#define P5_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #5 assigned IVG #x */ +#define P6_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #6 assigned IVG #x */ +#define P7_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #7 assigned IVG #x */ + +/* SIC_IAR1 Macros */ +#define P8_IVG(x) (((x)&0xF)-7) /* Peripheral #8 assigned IVG #x */ +#define P9_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #9 assigned IVG #x */ +#define P10_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #10 assigned IVG #x */ +#define P11_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #11 assigned IVG #x */ +#define P12_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #12 assigned IVG #x */ +#define P13_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #13 assigned IVG #x */ +#define P14_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #14 assigned IVG #x */ +#define P15_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #15 assigned IVG #x */ + +/* SIC_IAR2 Macros */ +#define P16_IVG(x) (((x)&0xF)-7) /* Peripheral #16 assigned IVG #x */ +#define P17_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #17 assigned IVG #x */ +#define P18_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #18 assigned IVG #x */ +#define P19_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #19 assigned IVG #x */ +#define P20_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #20 assigned IVG #x */ +#define P21_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #21 assigned IVG #x */ +#define P22_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #22 assigned IVG #x */ +#define P23_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #23 assigned IVG #x */ + +/* SIC_IAR3 Macros */ +#define P24_IVG(x) (((x)&0xF)-7) /* Peripheral #24 assigned IVG #x */ +#define P25_IVG(x) (((x)&0xF)-7) << 0x4 /* Peripheral #25 assigned IVG #x */ +#define P26_IVG(x) (((x)&0xF)-7) << 0x8 /* Peripheral #26 assigned IVG #x */ +#define P27_IVG(x) (((x)&0xF)-7) << 0xC /* Peripheral #27 assigned IVG #x */ +#define P28_IVG(x) (((x)&0xF)-7) << 0x10 /* Peripheral #28 assigned IVG #x */ +#define P29_IVG(x) (((x)&0xF)-7) << 0x14 /* Peripheral #29 assigned IVG #x */ +#define P30_IVG(x) (((x)&0xF)-7) << 0x18 /* Peripheral #30 assigned IVG #x */ +#define P31_IVG(x) (((x)&0xF)-7) << 0x1C /* Peripheral #31 assigned IVG #x */ + +/* SIC_IMASK Masks */ +#define SIC_UNMASK_ALL 0x00000000 /* Unmask all peripheral interrupts */ +#define SIC_MASK_ALL 0xFFFFFFFF /* Mask all peripheral interrupts */ +#define SIC_MASK(x) (1 << ((x)&0x1F)) /* Mask Peripheral #x interrupt */ +#define SIC_UNMASK(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Unmask Peripheral #x interrupt */ + +/* SIC_IWR Masks */ +#define IWR_DISABLE_ALL 0x00000000 /* Wakeup Disable all peripherals */ +#define IWR_ENABLE_ALL 0xFFFFFFFF /* Wakeup Enable all peripherals */ +#define IWR_ENABLE(x) (1 << ((x)&0x1F)) /* Wakeup Enable Peripheral #x */ +#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Wakeup Disable Peripheral #x */ + +/* ********* WATCHDOG TIMER MASKS ******************** */ + +/* Watchdog Timer WDOG_CTL Register Masks */ + +#define WDEV(x) ((x<<1) & 0x0006) /* event generated on roll over */ +#define WDEV_RESET 0x0000 /* generate reset event on roll over */ +#define WDEV_NMI 0x0002 /* generate NMI event on roll over */ +#define WDEV_GPI 0x0004 /* generate GP IRQ on roll over */ +#define WDEV_NONE 0x0006 /* no event on roll over */ +#define WDEN 0x0FF0 /* enable watchdog */ +#define WDDIS 0x0AD0 /* disable watchdog */ +#define WDRO 0x8000 /* watchdog rolled over latch */ + +/* depreciated WDOG_CTL Register Masks for legacy code */ + +#define ICTL WDEV +#define ENABLE_RESET WDEV_RESET +#define WDOG_RESET WDEV_RESET +#define ENABLE_NMI WDEV_NMI +#define WDOG_NMI WDEV_NMI +#define ENABLE_GPI WDEV_GPI +#define WDOG_GPI WDEV_GPI +#define DISABLE_EVT WDEV_NONE +#define WDOG_NONE WDEV_NONE + +#define TMR_EN WDEN +#define TMR_DIS WDDIS +#define TRO WDRO +#define ICTL_P0 0x01 +#define ICTL_P1 0x02 +#define TRO_P 0x0F + +/* + * REAL TIME CLOCK MASKS + */ +/* RTC_STAT and RTC_ALARM Masks */ +#define RTC_SEC 0x0000003F /* Real-Time Clock Seconds */ +#define RTC_MIN 0x00000FC0 /* Real-Time Clock Minutes */ +#define RTC_HR 0x0001F000 /* Real-Time Clock Hours */ +#define RTC_DAY 0xFFFE0000 /* Real-Time Clock Days */ + +/* + * RTC_ALARM Macro + * z=day y=hr x=min w=sec + */ +#define SET_ALARM(z,y,x,w) ((((z)&0x7FFF)<<0x11)|(((y)&0x1F)<<0xC)|(((x)&0x3F)<<0x6)|((w)&0x3F)) + +/* RTC_ICTL and RTC_ISTAT Masks */ +#define STOPWATCH 0x0001 /* Stopwatch Interrupt Enable */ +#define ALARM 0x0002 /* Alarm Interrupt Enable */ +#define SECOND 0x0004 /* Seconds (1 Hz) Interrupt Enable */ +#define MINUTE 0x0008 /* Minutes Interrupt Enable */ +#define HOUR 0x0010 /* Hours Interrupt Enable */ +#define DAY 0x0020 /* 24 Hours (Days) Interrupt Enable */ +#define DAY_ALARM 0x0040 /* Day Alarm (Day, Hour, Minute, Second) Interrupt Enable */ +#define WRITE_PENDING 0x4000 /* Write Pending Status */ +#define WRITE_COMPLETE 0x8000 /* Write Complete Interrupt Enable */ + +/* RTC_FAST / RTC_PREN Mask */ +#define PREN 0x0001 /* Enable Prescaler, RTC Runs @1 Hz */ + +/* + * UART CONTROLLER MASKS + */ +/* UARTx_LCR Masks */ +#define WLS(x) ((((x)&0x3)-5) & 0x03) /* Word Length Select */ +#define STB 0x04 /* Stop Bits */ +#define PEN 0x08 /* Parity Enable */ +#define EPS 0x10 /* Even Parity Select */ +#define STP 0x20 /* Stick Parity */ +#define SB 0x40 /* Set Break */ +#define DLAB 0x80 /* Divisor Latch Access */ + +/* UARTx_MCR Mask */ +#define LOOP 0x10 /* Loopback Mode Enable */ + +/* UARTx_LSR Masks */ +#define DR 0x01 /* Data Ready */ +#define OE 0x02 /* Overrun Error */ +#define PE 0x04 /* Parity Error */ +#define FE 0x08 /* Framing Error */ +#define BI 0x10 /* Break Interrupt */ +#define THRE 0x20 /* THR Empty */ +#define TEMT 0x40 /* TSR and UART_THR Empty */ + +/* UARTx_IER Masks */ +#define ERBFI 0x01 /* Enable Receive Buffer Full Interrupt */ +#define ETBEI 0x02 /* Enable Transmit Buffer Empty Interrupt */ +#define ELSI 0x04 /* Enable RX Status Interrupt */ + +/* UARTx_IIR Masks */ +#define NINT 0x01 /* Pending Interrupt */ +#define STATUS 0x06 /* Highest Priority Pending Interrupt */ + +/* UARTx_GCTL Masks */ +#define UCEN 0x01 /* Enable UARTx Clocks */ +#define IREN 0x02 /* Enable IrDA Mode */ +#define TPOLC 0x04 /* IrDA TX Polarity Change */ +#define RPOLC 0x08 /* IrDA RX Polarity Change */ +#define FPE 0x10 /* Force Parity Error On Transmit */ +#define FFE 0x20 /* Force Framing Error On Transmit */ + +/* + * SERIAL PERIPHERAL INTERFACE (SPI) MASKS + */ +/* SPI_CTL Masks */ +#define TIMOD 0x0003 /* Transfer Initiate Mode */ +#define RDBR_CORE 0x0000 /* RDBR Read Initiates, IRQ When RDBR Full */ +#define TDBR_CORE 0x0001 /* TDBR Write Initiates, IRQ When TDBR Empty */ +#define RDBR_DMA 0x0002 /* DMA Read, DMA Until FIFO Empty */ +#define TDBR_DMA 0x0003 /* DMA Write, DMA Until FIFO Full */ +#define SZ 0x0004 /* Send Zero (When TDBR Empty, Send Zero/Last*) */ +#define GM 0x0008 /* Get More (When RDBR Full, Overwrite/Discard*) */ +#define PSSE 0x0010 /* Slave-Select Input Enable */ +#define EMISO 0x0020 /* Enable MISO As Output */ +#define SIZE 0x0100 /* Size of Words (16/8* Bits) */ +#define LSBF 0x0200 /* LSB First */ +#define CPHA 0x0400 /* Clock Phase */ +#define CPOL 0x0800 /* Clock Polarity */ +#define MSTR 0x1000 /* Master/Slave* */ +#define WOM 0x2000 /* Write Open Drain Master */ +#define SPE 0x4000 /* SPI Enable */ + +/* SPI_FLG Masks */ +#define FLS1 0x0002 /* Enables SPI_FLOUT1 as SPI Slave-Select Output */ +#define FLS2 0x0004 /* Enables SPI_FLOUT2 as SPI Slave-Select Output */ +#define FLS3 0x0008 /* Enables SPI_FLOUT3 as SPI Slave-Select Output */ +#define FLS4 0x0010 /* Enables SPI_FLOUT4 as SPI Slave-Select Output */ +#define FLS5 0x0020 /* Enables SPI_FLOUT5 as SPI Slave-Select Output */ +#define FLS6 0x0040 /* Enables SPI_FLOUT6 as SPI Slave-Select Output */ +#define FLS7 0x0080 /* Enables SPI_FLOUT7 as SPI Slave-Select Output */ +#define FLG1 0xFDFF /* Activates SPI_FLOUT1 */ +#define FLG2 0xFBFF /* Activates SPI_FLOUT2 */ +#define FLG3 0xF7FF /* Activates SPI_FLOUT3 */ +#define FLG4 0xEFFF /* Activates SPI_FLOUT4 */ +#define FLG5 0xDFFF /* Activates SPI_FLOUT5 */ +#define FLG6 0xBFFF /* Activates SPI_FLOUT6 */ +#define FLG7 0x7FFF /* Activates SPI_FLOUT7 */ + +/* SPI_STAT Masks */ +#define SPIF 0x0001 /* SPI Finished (Single-Word Transfer Complete) */ +#define MODF 0x0002 /* Mode Fault Error (Another Device Tried To Become Master) */ +#define TXE 0x0004 /* Transmission Error (Data Sent With No New Data In TDBR) */ +#define TXS 0x0008 /* SPI_TDBR Data Buffer Status (Full/Empty*) */ +#define RBSY 0x0010 /* Receive Error (Data Received With RDBR Full) */ +#define RXS 0x0020 /* SPI_RDBR Data Buffer Status (Full/Empty*) */ +#define TXCOL 0x0040 /* Transmit Collision Error (Corrupt Data May Have Been Sent) */ + +/* + * GENERAL PURPOSE TIMER MASKS + */ +/* TIMER_ENABLE Masks */ +#define TIMEN0 0x0001 /* Enable Timer 0 */ +#define TIMEN1 0x0002 /* Enable Timer 1 */ +#define TIMEN2 0x0004 /* Enable Timer 2 */ +#define TIMEN3 0x0008 /* Enable Timer 3 */ +#define TIMEN4 0x0010 /* Enable Timer 4 */ +#define TIMEN5 0x0020 /* Enable Timer 5 */ +#define TIMEN6 0x0040 /* Enable Timer 6 */ +#define TIMEN7 0x0080 /* Enable Timer 7 */ + +/* TIMER_DISABLE Masks */ +#define TIMDIS0 TIMEN0 /* Disable Timer 0 */ +#define TIMDIS1 TIMEN1 /* Disable Timer 1 */ +#define TIMDIS2 TIMEN2 /* Disable Timer 2 */ +#define TIMDIS3 TIMEN3 /* Disable Timer 3 */ +#define TIMDIS4 TIMEN4 /* Disable Timer 4 */ +#define TIMDIS5 TIMEN5 /* Disable Timer 5 */ +#define TIMDIS6 TIMEN6 /* Disable Timer 6 */ +#define TIMDIS7 TIMEN7 /* Disable Timer 7 */ + +/* TIMER_STATUS Masks */ +#define TIMIL0 0x00000001 /* Timer 0 Interrupt */ +#define TIMIL1 0x00000002 /* Timer 1 Interrupt */ +#define TIMIL2 0x00000004 /* Timer 2 Interrupt */ +#define TIMIL3 0x00000008 /* Timer 3 Interrupt */ +#define TOVF_ERR0 0x00000010 /* Timer 0 Counter Overflow */ +#define TOVF_ERR1 0x00000020 /* Timer 1 Counter Overflow */ +#define TOVF_ERR2 0x00000040 /* Timer 2 Counter Overflow */ +#define TOVF_ERR3 0x00000080 /* Timer 3 Counter Overflow */ +#define TRUN0 0x00001000 /* Timer 0 Slave Enable Status */ +#define TRUN1 0x00002000 /* Timer 1 Slave Enable Status */ +#define TRUN2 0x00004000 /* Timer 2 Slave Enable Status */ +#define TRUN3 0x00008000 /* Timer 3 Slave Enable Status */ +#define TIMIL4 0x00010000 /* Timer 4 Interrupt */ +#define TIMIL5 0x00020000 /* Timer 5 Interrupt */ +#define TIMIL6 0x00040000 /* Timer 6 Interrupt */ +#define TIMIL7 0x00080000 /* Timer 7 Interrupt */ +#define TOVF_ERR4 0x00100000 /* Timer 4 Counter Overflow */ +#define TOVF_ERR5 0x00200000 /* Timer 5 Counter Overflow */ +#define TOVF_ERR6 0x00400000 /* Timer 6 Counter Overflow */ +#define TOVF_ERR7 0x00800000 /* Timer 7 Counter Overflow */ +#define TRUN4 0x10000000 /* Timer 4 Slave Enable Status */ +#define TRUN5 0x20000000 /* Timer 5 Slave Enable Status */ +#define TRUN6 0x40000000 /* Timer 6 Slave Enable Status */ +#define TRUN7 0x80000000 /* Timer 7 Slave Enable Status */ + +/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */ +#define TOVL_ERR0 TOVF_ERR0 +#define TOVL_ERR1 TOVF_ERR1 +#define TOVL_ERR2 TOVF_ERR2 +#define TOVL_ERR3 TOVF_ERR3 +#define TOVL_ERR4 TOVF_ERR4 +#define TOVL_ERR5 TOVF_ERR5 +#define TOVL_ERR6 TOVF_ERR6 +#define TOVL_ERR7 TOVF_ERR7 + +/* TIMERx_CONFIG Masks */ +#define PWM_OUT 0x0001 /* Pulse-Width Modulation Output Mode */ +#define WDTH_CAP 0x0002 /* Width Capture Input Mode */ +#define EXT_CLK 0x0003 /* External Clock Mode */ +#define PULSE_HI 0x0004 /* Action Pulse (Positive/Negative*) */ +#define PERIOD_CNT 0x0008 /* Period Count */ +#define IRQ_ENA 0x0010 /* Interrupt Request Enable */ +#define TIN_SEL 0x0020 /* Timer Input Select */ +#define OUT_DIS 0x0040 /* Output Pad Disable */ +#define CLK_SEL 0x0080 /* Timer Clock Select */ +#define TOGGLE_HI 0x0100 /* PWM_OUT PULSE_HI Toggle Mode */ +#define EMU_RUN 0x0200 /* Emulation Behavior Select */ +#define ERR_TYP 0xC000 /* Error Type */ + +/* + * GPIO PORTS F, G, H MASKS + * General Purpose IO (0xFFC00700 - 0xFFC007FF) Masks + */ +/* Port F Masks */ +#define PF0 0x0001 +#define PF1 0x0002 +#define PF2 0x0004 +#define PF3 0x0008 +#define PF4 0x0010 +#define PF5 0x0020 +#define PF6 0x0040 +#define PF7 0x0080 +#define PF8 0x0100 +#define PF9 0x0200 +#define PF10 0x0400 +#define PF11 0x0800 +#define PF12 0x1000 +#define PF13 0x2000 +#define PF14 0x4000 +#define PF15 0x8000 + +/* Port G Masks */ +#define PG0 0x0001 +#define PG1 0x0002 +#define PG2 0x0004 +#define PG3 0x0008 +#define PG4 0x0010 +#define PG5 0x0020 +#define PG6 0x0040 +#define PG7 0x0080 +#define PG8 0x0100 +#define PG9 0x0200 +#define PG10 0x0400 +#define PG11 0x0800 +#define PG12 0x1000 +#define PG13 0x2000 +#define PG14 0x4000 +#define PG15 0x8000 + +/* Port H Masks */ +#define PH0 0x0001 +#define PH1 0x0002 +#define PH2 0x0004 +#define PH3 0x0008 +#define PH4 0x0010 +#define PH5 0x0020 +#define PH6 0x0040 +#define PH7 0x0080 +#define PH8 0x0100 +#define PH9 0x0200 +#define PH10 0x0400 +#define PH11 0x0800 +#define PH12 0x1000 +#define PH13 0x2000 +#define PH14 0x4000 +#define PH15 0x8000 + +/* + * SERIAL PORT MASKS + */ +/* SPORTx_TCR1 Masks */ +#define TSPEN 0x0001 /* Transmit Enable */ +#define ITCLK 0x0002 /* Internal Transmit Clock Select */ +#define DTYPE_NORM 0x0004 /* Data Format Normal */ +#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */ +#define DTYPE_ALAW 0x000C /* Compand Using A-Law */ +#define TLSBIT 0x0010 /* Transmit Bit Order */ +#define ITFS 0x0200 /* Internal Transmit Frame Sync Select */ +#define TFSR 0x0400 /* Transmit Frame Sync Required Select */ +#define DITFS 0x0800 /* Data-Independent Transmit Frame Sync Select */ +#define LTFS 0x1000 /* Low Transmit Frame Sync Select */ +#define LATFS 0x2000 /* Late Transmit Frame Sync Select */ +#define TCKFE 0x4000 /* Clock Falling Edge Select */ + +/* SPORTx_TCR2 Masks and Macro */ +#define SLEN(x) ((x)&0x1F) /* SPORT TX Word Length (2 - 31) */ +#define TXSE 0x0100 /* TX Secondary Enable */ +#define TSFSE 0x0200 /* Transmit Stereo Frame Sync Enable */ +#define TRFST 0x0400 /* Left/Right Order (1 = Right Channel 1st) */ + +/* SPORTx_RCR1 Masks */ +#define RSPEN 0x0001 /* Receive Enable */ +#define IRCLK 0x0002 /* Internal Receive Clock Select */ +#define DTYPE_NORM 0x0004 /* Data Format Normal */ +#define DTYPE_ULAW 0x0008 /* Compand Using u-Law */ +#define DTYPE_ALAW 0x000C /* Compand Using A-Law */ +#define RLSBIT 0x0010 /* Receive Bit Order */ +#define IRFS 0x0200 /* Internal Receive Frame Sync Select */ +#define RFSR 0x0400 /* Receive Frame Sync Required Select */ +#define LRFS 0x1000 /* Low Receive Frame Sync Select */ +#define LARFS 0x2000 /* Late Receive Frame Sync Select */ +#define RCKFE 0x4000 /* Clock Falling Edge Select */ + +/* SPORTx_RCR2 Masks */ +#define SLEN(x) ((x)&0x1F) /* SPORT RX Word Length (2 - 31) */ +#define RXSE 0x0100 /* RX Secondary Enable */ +#define RSFSE 0x0200 /* RX Stereo Frame Sync Enable */ +#define RRFST 0x0400 /* Right-First Data Order */ + +/* SPORTx_STAT Masks */ +#define RXNE 0x0001 /* Receive FIFO Not Empty Status */ +#define RUVF 0x0002 /* Sticky Receive Underflow Status */ +#define ROVF 0x0004 /* Sticky Receive Overflow Status */ +#define TXF 0x0008 /* Transmit FIFO Full Status */ +#define TUVF 0x0010 /* Sticky Transmit Underflow Status */ +#define TOVF 0x0020 /* Sticky Transmit Overflow Status */ +#define TXHRE 0x0040 /* Transmit Hold Register Empty */ + +/* SPORTx_MCMC1 Macros */ +#define WOFF(x) ((x) & 0x3FF) /* Multichannel Window Offset Field */ + +/* Only use WSIZE Macro With Logic OR While Setting Lower Order Bits */ +#define WSIZE(x) (((((x)>>0x3)-1)&0xF) << 0xC) /* Multichannel Window Size = (x/8)-1 */ + +/* SPORTx_MCMC2 Masks */ +#define REC_BYPASS 0x0000 /* Bypass Mode (No Clock Recovery) */ +#define REC_2FROM4 0x0002 /* Recover 2 MHz Clock from 4 MHz Clock */ +#define REC_8FROM16 0x0003 /* Recover 8 MHz Clock from 16 MHz Clock */ +#define MCDTXPE 0x0004 /* Multichannel DMA Transmit Packing */ +#define MCDRXPE 0x0008 /* Multichannel DMA Receive Packing */ +#define MCMEN 0x0010 /* Multichannel Frame Mode Enable */ +#define FSDR 0x0080 /* Multichannel Frame Sync to Data Relationship */ +#define MFD_0 0x0000 /* Multichannel Frame Delay = 0 */ +#define MFD_1 0x1000 /* Multichannel Frame Delay = 1 */ +#define MFD_2 0x2000 /* Multichannel Frame Delay = 2 */ +#define MFD_3 0x3000 /* Multichannel Frame Delay = 3 */ +#define MFD_4 0x4000 /* Multichannel Frame Delay = 4 */ +#define MFD_5 0x5000 /* Multichannel Frame Delay = 5 */ +#define MFD_6 0x6000 /* Multichannel Frame Delay = 6 */ +#define MFD_7 0x7000 /* Multichannel Frame Delay = 7 */ +#define MFD_8 0x8000 /* Multichannel Frame Delay = 8 */ +#define MFD_9 0x9000 /* Multichannel Frame Delay = 9 */ +#define MFD_10 0xA000 /* Multichannel Frame Delay = 10 */ +#define MFD_11 0xB000 /* Multichannel Frame Delay = 11 */ +#define MFD_12 0xC000 /* Multichannel Frame Delay = 12 */ +#define MFD_13 0xD000 /* Multichannel Frame Delay = 13 */ +#define MFD_14 0xE000 /* Multichannel Frame Delay = 14 */ +#define MFD_15 0xF000 /* Multichannel Frame Delay = 15 */ + +/* + * ASYNCHRONOUS MEMORY CONTROLLER MASKS + */ +/* EBIU_AMGCTL Masks */ +#define AMCKEN 0x0001 /* Enable CLKOUT */ +#define AMBEN_NONE 0x0000 /* All Banks Disabled */ +#define AMBEN_B0 0x0002 /* Enable Async Memory Bank 0 only */ +#define AMBEN_B0_B1 0x0004 /* Enable Async Memory Banks 0 & 1 only */ +#define AMBEN_B0_B1_B2 0x0006 /* Enable Async Memory Banks 0, 1, and 2 */ +#define AMBEN_ALL 0x0008 /* Enable Async Memory Banks (all) 0, 1, 2, and 3 */ + +/* EBIU_AMBCTL0 Masks */ +#define B0RDYEN 0x00000001 /* Bank 0 (B0) RDY Enable */ +#define B0RDYPOL 0x00000002 /* B0 RDY Active High */ +#define B0TT_1 0x00000004 /* B0 Transition Time (Read to Write) = 1 cycle */ +#define B0TT_2 0x00000008 /* B0 Transition Time (Read to Write) = 2 cycles */ +#define B0TT_3 0x0000000C /* B0 Transition Time (Read to Write) = 3 cycles */ +#define B0TT_4 0x00000000 /* B0 Transition Time (Read to Write) = 4 cycles */ +#define B0ST_1 0x00000010 /* B0 Setup Time (AOE to Read/Write) = 1 cycle */ +#define B0ST_2 0x00000020 /* B0 Setup Time (AOE to Read/Write) = 2 cycles */ +#define B0ST_3 0x00000030 /* B0 Setup Time (AOE to Read/Write) = 3 cycles */ +#define B0ST_4 0x00000000 /* B0 Setup Time (AOE to Read/Write) = 4 cycles */ +#define B0HT_1 0x00000040 /* B0 Hold Time (~Read/Write to ~AOE) = 1 cycle */ +#define B0HT_2 0x00000080 /* B0 Hold Time (~Read/Write to ~AOE) = 2 cycles */ +#define B0HT_3 0x000000C0 /* B0 Hold Time (~Read/Write to ~AOE) = 3 cycles */ +#define B0HT_0 0x00000000 /* B0 Hold Time (~Read/Write to ~AOE) = 0 cycles */ +#define B0RAT_1 0x00000100 /* B0 Read Access Time = 1 cycle */ +#define B0RAT_2 0x00000200 /* B0 Read Access Time = 2 cycles */ +#define B0RAT_3 0x00000300 /* B0 Read Access Time = 3 cycles */ +#define B0RAT_4 0x00000400 /* B0 Read Access Time = 4 cycles */ +#define B0RAT_5 0x00000500 /* B0 Read Access Time = 5 cycles */ +#define B0RAT_6 0x00000600 /* B0 Read Access Time = 6 cycles */ +#define B0RAT_7 0x00000700 /* B0 Read Access Time = 7 cycles */ +#define B0RAT_8 0x00000800 /* B0 Read Access Time = 8 cycles */ +#define B0RAT_9 0x00000900 /* B0 Read Access Time = 9 cycles */ +#define B0RAT_10 0x00000A00 /* B0 Read Access Time = 10 cycles */ +#define B0RAT_11 0x00000B00 /* B0 Read Access Time = 11 cycles */ +#define B0RAT_12 0x00000C00 /* B0 Read Access Time = 12 cycles */ +#define B0RAT_13 0x00000D00 /* B0 Read Access Time = 13 cycles */ +#define B0RAT_14 0x00000E00 /* B0 Read Access Time = 14 cycles */ +#define B0RAT_15 0x00000F00 /* B0 Read Access Time = 15 cycles */ +#define B0WAT_1 0x00001000 /* B0 Write Access Time = 1 cycle */ +#define B0WAT_2 0x00002000 /* B0 Write Access Time = 2 cycles */ +#define B0WAT_3 0x00003000 /* B0 Write Access Time = 3 cycles */ +#define B0WAT_4 0x00004000 /* B0 Write Access Time = 4 cycles */ +#define B0WAT_5 0x00005000 /* B0 Write Access Time = 5 cycles */ +#define B0WAT_6 0x00006000 /* B0 Write Access Time = 6 cycles */ +#define B0WAT_7 0x00007000 /* B0 Write Access Time = 7 cycles */ +#define B0WAT_8 0x00008000 /* B0 Write Access Time = 8 cycles */ +#define B0WAT_9 0x00009000 /* B0 Write Access Time = 9 cycles */ +#define B0WAT_10 0x0000A000 /* B0 Write Access Time = 10 cycles */ +#define B0WAT_11 0x0000B000 /* B0 Write Access Time = 11 cycles */ +#define B0WAT_12 0x0000C000 /* B0 Write Access Time = 12 cycles */ +#define B0WAT_13 0x0000D000 /* B0 Write Access Time = 13 cycles */ +#define B0WAT_14 0x0000E000 /* B0 Write Access Time = 14 cycles */ +#define B0WAT_15 0x0000F000 /* B0 Write Access Time = 15 cycles */ + +#define B1RDYEN 0x00010000 /* Bank 1 (B1) RDY Enable */ +#define B1RDYPOL 0x00020000 /* B1 RDY Active High */ +#define B1TT_1 0x00040000 /* B1 Transition Time (Read to Write) = 1 cycle */ +#define B1TT_2 0x00080000 /* B1 Transition Time (Read to Write) = 2 cycles */ +#define B1TT_3 0x000C0000 /* B1 Transition Time (Read to Write) = 3 cycles */ +#define B1TT_4 0x00000000 /* B1 Transition Time (Read to Write) = 4 cycles */ +#define B1ST_1 0x00100000 /* B1 Setup Time (AOE to Read/Write) = 1 cycle */ +#define B1ST_2 0x00200000 /* B1 Setup Time (AOE to Read/Write) = 2 cycles */ +#define B1ST_3 0x00300000 /* B1 Setup Time (AOE to Read/Write) = 3 cycles */ +#define B1ST_4 0x00000000 /* B1 Setup Time (AOE to Read/Write) = 4 cycles */ +#define B1HT_1 0x00400000 /* B1 Hold Time (~Read/Write to ~AOE) = 1 cycle */ +#define B1HT_2 0x00800000 /* B1 Hold Time (~Read/Write to ~AOE) = 2 cycles */ +#define B1HT_3 0x00C00000 /* B1 Hold Time (~Read/Write to ~AOE) = 3 cycles */ +#define B1HT_0 0x00000000 /* B1 Hold Time (~Read/Write to ~AOE) = 0 cycles */ +#define B1RAT_1 0x01000000 /* B1 Read Access Time = 1 cycle */ +#define B1RAT_2 0x02000000 /* B1 Read Access Time = 2 cycles */ +#define B1RAT_3 0x03000000 /* B1 Read Access Time = 3 cycles */ +#define B1RAT_4 0x04000000 /* B1 Read Access Time = 4 cycles */ +#define B1RAT_5 0x05000000 /* B1 Read Access Time = 5 cycles */ +#define B1RAT_6 0x06000000 /* B1 Read Access Time = 6 cycles */ +#define B1RAT_7 0x07000000 /* B1 Read Access Time = 7 cycles */ +#define B1RAT_8 0x08000000 /* B1 Read Access Time = 8 cycles */ +#define B1RAT_9 0x09000000 /* B1 Read Access Time = 9 cycles */ +#define B1RAT_10 0x0A000000 /* B1 Read Access Time = 10 cycles */ +#define B1RAT_11 0x0B000000 /* B1 Read Access Time = 11 cycles */ +#define B1RAT_12 0x0C000000 /* B1 Read Access Time = 12 cycles */ +#define B1RAT_13 0x0D000000 /* B1 Read Access Time = 13 cycles */ +#define B1RAT_14 0x0E000000 /* B1 Read Access Time = 14 cycles */ +#define B1RAT_15 0x0F000000 /* B1 Read Access Time = 15 cycles */ +#define B1WAT_1 0x10000000 /* B1 Write Access Time = 1 cycle */ +#define B1WAT_2 0x20000000 /* B1 Write Access Time = 2 cycles */ +#define B1WAT_3 0x30000000 /* B1 Write Access Time = 3 cycles */ +#define B1WAT_4 0x40000000 /* B1 Write Access Time = 4 cycles */ +#define B1WAT_5 0x50000000 /* B1 Write Access Time = 5 cycles */ +#define B1WAT_6 0x60000000 /* B1 Write Access Time = 6 cycles */ +#define B1WAT_7 0x70000000 /* B1 Write Access Time = 7 cycles */ +#define B1WAT_8 0x80000000 /* B1 Write Access Time = 8 cycles */ +#define B1WAT_9 0x90000000 /* B1 Write Access Time = 9 cycles */ +#define B1WAT_10 0xA0000000 /* B1 Write Access Time = 10 cycles */ +#define B1WAT_11 0xB0000000 /* B1 Write Access Time = 11 cycles */ +#define B1WAT_12 0xC0000000 /* B1 Write Access Time = 12 cycles */ +#define B1WAT_13 0xD0000000 /* B1 Write Access Time = 13 cycles */ +#define B1WAT_14 0xE0000000 /* B1 Write Access Time = 14 cycles */ +#define B1WAT_15 0xF0000000 /* B1 Write Access Time = 15 cycles */ + +/* EBIU_AMBCTL1 Masks */ +#define B2RDYEN 0x00000001 /* Bank 2 (B2) RDY Enable */ +#define B2RDYPOL 0x00000002 /* B2 RDY Active High */ +#define B2TT_1 0x00000004 /* B2 Transition Time (Read to Write) = 1 cycle */ +#define B2TT_2 0x00000008 /* B2 Transition Time (Read to Write) = 2 cycles */ +#define B2TT_3 0x0000000C /* B2 Transition Time (Read to Write) = 3 cycles */ +#define B2TT_4 0x00000000 /* B2 Transition Time (Read to Write) = 4 cycles */ +#define B2ST_1 0x00000010 /* B2 Setup Time (AOE to Read/Write) = 1 cycle */ +#define B2ST_2 0x00000020 /* B2 Setup Time (AOE to Read/Write) = 2 cycles */ +#define B2ST_3 0x00000030 /* B2 Setup Time (AOE to Read/Write) = 3 cycles */ +#define B2ST_4 0x00000000 /* B2 Setup Time (AOE to Read/Write) = 4 cycles */ +#define B2HT_1 0x00000040 /* B2 Hold Time (~Read/Write to ~AOE) = 1 cycle */ +#define B2HT_2 0x00000080 /* B2 Hold Time (~Read/Write to ~AOE) = 2 cycles */ +#define B2HT_3 0x000000C0 /* B2 Hold Time (~Read/Write to ~AOE) = 3 cycles */ +#define B2HT_0 0x00000000 /* B2 Hold Time (~Read/Write to ~AOE) = 0 cycles */ +#define B2RAT_1 0x00000100 /* B2 Read Access Time = 1 cycle */ +#define B2RAT_2 0x00000200 /* B2 Read Access Time = 2 cycles */ +#define B2RAT_3 0x00000300 /* B2 Read Access Time = 3 cycles */ +#define B2RAT_4 0x00000400 /* B2 Read Access Time = 4 cycles */ +#define B2RAT_5 0x00000500 /* B2 Read Access Time = 5 cycles */ +#define B2RAT_6 0x00000600 /* B2 Read Access Time = 6 cycles */ +#define B2RAT_7 0x00000700 /* B2 Read Access Time = 7 cycles */ +#define B2RAT_8 0x00000800 /* B2 Read Access Time = 8 cycles */ +#define B2RAT_9 0x00000900 /* B2 Read Access Time = 9 cycles */ +#define B2RAT_10 0x00000A00 /* B2 Read Access Time = 10 cycles */ +#define B2RAT_11 0x00000B00 /* B2 Read Access Time = 11 cycles */ +#define B2RAT_12 0x00000C00 /* B2 Read Access Time = 12 cycles */ +#define B2RAT_13 0x00000D00 /* B2 Read Access Time = 13 cycles */ +#define B2RAT_14 0x00000E00 /* B2 Read Access Time = 14 cycles */ +#define B2RAT_15 0x00000F00 /* B2 Read Access Time = 15 cycles */ +#define B2WAT_1 0x00001000 /* B2 Write Access Time = 1 cycle */ +#define B2WAT_2 0x00002000 /* B2 Write Access Time = 2 cycles */ +#define B2WAT_3 0x00003000 /* B2 Write Access Time = 3 cycles */ +#define B2WAT_4 0x00004000 /* B2 Write Access Time = 4 cycles */ +#define B2WAT_5 0x00005000 /* B2 Write Access Time = 5 cycles */ +#define B2WAT_6 0x00006000 /* B2 Write Access Time = 6 cycles */ +#define B2WAT_7 0x00007000 /* B2 Write Access Time = 7 cycles */ +#define B2WAT_8 0x00008000 /* B2 Write Access Time = 8 cycles */ +#define B2WAT_9 0x00009000 /* B2 Write Access Time = 9 cycles */ +#define B2WAT_10 0x0000A000 /* B2 Write Access Time = 10 cycles */ +#define B2WAT_11 0x0000B000 /* B2 Write Access Time = 11 cycles */ +#define B2WAT_12 0x0000C000 /* B2 Write Access Time = 12 cycles */ +#define B2WAT_13 0x0000D000 /* B2 Write Access Time = 13 cycles */ +#define B2WAT_14 0x0000E000 /* B2 Write Access Time = 14 cycles */ +#define B2WAT_15 0x0000F000 /* B2 Write Access Time = 15 cycles */ + +#define B3RDYEN 0x00010000 /* Bank 3 (B3) RDY Enable */ +#define B3RDYPOL 0x00020000 /* B3 RDY Active High */ +#define B3TT_1 0x00040000 /* B3 Transition Time (Read to Write) = 1 cycle */ +#define B3TT_2 0x00080000 /* B3 Transition Time (Read to Write) = 2 cycles */ +#define B3TT_3 0x000C0000 /* B3 Transition Time (Read to Write) = 3 cycles */ +#define B3TT_4 0x00000000 /* B3 Transition Time (Read to Write) = 4 cycles */ +#define B3ST_1 0x00100000 /* B3 Setup Time (AOE to Read/Write) = 1 cycle */ +#define B3ST_2 0x00200000 /* B3 Setup Time (AOE to Read/Write) = 2 cycles */ +#define B3ST_3 0x00300000 /* B3 Setup Time (AOE to Read/Write) = 3 cycles */ +#define B3ST_4 0x00000000 /* B3 Setup Time (AOE to Read/Write) = 4 cycles */ +#define B3HT_1 0x00400000 /* B3 Hold Time (~Read/Write to ~AOE) = 1 cycle */ +#define B3HT_2 0x00800000 /* B3 Hold Time (~Read/Write to ~AOE) = 2 cycles */ +#define B3HT_3 0x00C00000 /* B3 Hold Time (~Read/Write to ~AOE) = 3 cycles */ +#define B3HT_0 0x00000000 /* B3 Hold Time (~Read/Write to ~AOE) = 0 cycles */ +#define B3RAT_1 0x01000000 /* B3 Read Access Time = 1 cycle */ +#define B3RAT_2 0x02000000 /* B3 Read Access Time = 2 cycles */ +#define B3RAT_3 0x03000000 /* B3 Read Access Time = 3 cycles */ +#define B3RAT_4 0x04000000 /* B3 Read Access Time = 4 cycles */ +#define B3RAT_5 0x05000000 /* B3 Read Access Time = 5 cycles */ +#define B3RAT_6 0x06000000 /* B3 Read Access Time = 6 cycles */ +#define B3RAT_7 0x07000000 /* B3 Read Access Time = 7 cycles */ +#define B3RAT_8 0x08000000 /* B3 Read Access Time = 8 cycles */ +#define B3RAT_9 0x09000000 /* B3 Read Access Time = 9 cycles */ +#define B3RAT_10 0x0A000000 /* B3 Read Access Time = 10 cycles */ +#define B3RAT_11 0x0B000000 /* B3 Read Access Time = 11 cycles */ +#define B3RAT_12 0x0C000000 /* B3 Read Access Time = 12 cycles */ +#define B3RAT_13 0x0D000000 /* B3 Read Access Time = 13 cycles */ +#define B3RAT_14 0x0E000000 /* B3 Read Access Time = 14 cycles */ +#define B3RAT_15 0x0F000000 /* B3 Read Access Time = 15 cycles */ +#define B3WAT_1 0x10000000 /* B3 Write Access Time = 1 cycle */ +#define B3WAT_2 0x20000000 /* B3 Write Access Time = 2 cycles */ +#define B3WAT_3 0x30000000 /* B3 Write Access Time = 3 cycles */ +#define B3WAT_4 0x40000000 /* B3 Write Access Time = 4 cycles */ +#define B3WAT_5 0x50000000 /* B3 Write Access Time = 5 cycles */ +#define B3WAT_6 0x60000000 /* B3 Write Access Time = 6 cycles */ +#define B3WAT_7 0x70000000 /* B3 Write Access Time = 7 cycles */ +#define B3WAT_8 0x80000000 /* B3 Write Access Time = 8 cycles */ +#define B3WAT_9 0x90000000 /* B3 Write Access Time = 9 cycles */ +#define B3WAT_10 0xA0000000 /* B3 Write Access Time = 10 cycles */ +#define B3WAT_11 0xB0000000 /* B3 Write Access Time = 11 cycles */ +#define B3WAT_12 0xC0000000 /* B3 Write Access Time = 12 cycles */ +#define B3WAT_13 0xD0000000 /* B3 Write Access Time = 13 cycles */ +#define B3WAT_14 0xE0000000 /* B3 Write Access Time = 14 cycles */ +#define B3WAT_15 0xF0000000 /* B3 Write Access Time = 15 cycles */ + +/* + * SDRAM CONTROLLER MASKS + */ +/* EBIU_SDGCTL Masks */ +#define SCTLE 0x00000001 /* Enable SDRAM Signals */ +#define CL_2 0x00000008 /* SDRAM CAS Latency = 2 cycles */ +#define CL_3 0x0000000C /* SDRAM CAS Latency = 3 cycles */ +#define PASR_ALL 0x00000000 /* All 4 SDRAM Banks Refreshed In Self-Refresh */ +#define PASR_B0_B1 0x00000010 /* SDRAM Banks 0 and 1 Are Refreshed In Self-Refresh */ +#define PASR_B0 0x00000020 /* Only SDRAM Bank 0 Is Refreshed In Self-Refresh */ +#define TRAS_1 0x00000040 /* SDRAM tRAS = 1 cycle */ +#define TRAS_2 0x00000080 /* SDRAM tRAS = 2 cycles */ +#define TRAS_3 0x000000C0 /* SDRAM tRAS = 3 cycles */ +#define TRAS_4 0x00000100 /* SDRAM tRAS = 4 cycles */ +#define TRAS_5 0x00000140 /* SDRAM tRAS = 5 cycles */ +#define TRAS_6 0x00000180 /* SDRAM tRAS = 6 cycles */ +#define TRAS_7 0x000001C0 /* SDRAM tRAS = 7 cycles */ +#define TRAS_8 0x00000200 /* SDRAM tRAS = 8 cycles */ +#define TRAS_9 0x00000240 /* SDRAM tRAS = 9 cycles */ +#define TRAS_10 0x00000280 /* SDRAM tRAS = 10 cycles */ +#define TRAS_11 0x000002C0 /* SDRAM tRAS = 11 cycles */ +#define TRAS_12 0x00000300 /* SDRAM tRAS = 12 cycles */ +#define TRAS_13 0x00000340 /* SDRAM tRAS = 13 cycles */ +#define TRAS_14 0x00000380 /* SDRAM tRAS = 14 cycles */ +#define TRAS_15 0x000003C0 /* SDRAM tRAS = 15 cycles */ +#define TRP_1 0x00000800 /* SDRAM tRP = 1 cycle */ +#define TRP_2 0x00001000 /* SDRAM tRP = 2 cycles */ +#define TRP_3 0x00001800 /* SDRAM tRP = 3 cycles */ +#define TRP_4 0x00002000 /* SDRAM tRP = 4 cycles */ +#define TRP_5 0x00002800 /* SDRAM tRP = 5 cycles */ +#define TRP_6 0x00003000 /* SDRAM tRP = 6 cycles */ +#define TRP_7 0x00003800 /* SDRAM tRP = 7 cycles */ +#define TRCD_1 0x00008000 /* SDRAM tRCD = 1 cycle */ +#define TRCD_2 0x00010000 /* SDRAM tRCD = 2 cycles */ +#define TRCD_3 0x00018000 /* SDRAM tRCD = 3 cycles */ +#define TRCD_4 0x00020000 /* SDRAM tRCD = 4 cycles */ +#define TRCD_5 0x00028000 /* SDRAM tRCD = 5 cycles */ +#define TRCD_6 0x00030000 /* SDRAM tRCD = 6 cycles */ +#define TRCD_7 0x00038000 /* SDRAM tRCD = 7 cycles */ +#define TWR_1 0x00080000 /* SDRAM tWR = 1 cycle */ +#define TWR_2 0x00100000 /* SDRAM tWR = 2 cycles */ +#define TWR_3 0x00180000 /* SDRAM tWR = 3 cycles */ +#define PUPSD 0x00200000 /* Power-Up Start Delay (15 SCLK Cycles Delay) */ +#define PSM 0x00400000 /* Power-Up Sequence (Mode Register Before/After* Refresh) */ +#define PSS 0x00800000 /* Enable Power-Up Sequence on Next SDRAM Access */ +#define SRFS 0x01000000 /* Enable SDRAM Self-Refresh Mode */ +#define EBUFE 0x02000000 /* Enable External Buffering Timing */ +#define FBBRW 0x04000000 /* Enable Fast Back-To-Back Read To Write */ +#define EMREN 0x10000000 /* Extended Mode Register Enable */ +#define TCSR 0x20000000 /* Temp-Compensated Self-Refresh Value (85/45* Deg C) */ +#define CDDBG 0x40000000 /* Tristate SDRAM Controls During Bus Grant */ + +/* EBIU_SDBCTL Masks */ +#define EBE 0x0001 /* Enable SDRAM External Bank */ +#define EBSZ_16 0x0000 /* SDRAM External Bank Size = 16MB */ +#define EBSZ_32 0x0002 /* SDRAM External Bank Size = 32MB */ +#define EBSZ_64 0x0004 /* SDRAM External Bank Size = 64MB */ +#define EBSZ_128 0x0006 /* SDRAM External Bank Size = 128MB */ +#define EBCAW_8 0x0000 /* SDRAM External Bank Column Address Width = 8 Bits */ +#define EBCAW_9 0x0010 /* SDRAM External Bank Column Address Width = 9 Bits */ +#define EBCAW_10 0x0020 /* SDRAM External Bank Column Address Width = 10 Bits */ +#define EBCAW_11 0x0030 /* SDRAM External Bank Column Address Width = 11 Bits */ + +/* EBIU_SDSTAT Masks */ +#define SDCI 0x0001 /* SDRAM Controller Idle */ +#define SDSRA 0x0002 /* SDRAM Self-Refresh Active */ +#define SDPUA 0x0004 /* SDRAM Power-Up Active */ +#define SDRS 0x0008 /* SDRAM Will Power-Up On Next Access */ +#define SDEASE 0x0010 /* SDRAM EAB Sticky Error Status */ +#define BGSTAT 0x0020 /* Bus Grant Status */ + +/* + * DMA CONTROLLER MASKS + */ +/* DMAx_CONFIG, MDMA_yy_CONFIG Masks */ +#define DMAEN 0x0001 /* DMA Channel Enable */ +#define WNR 0x0002 /* Channel Direction (W/R*) */ +#define WDSIZE_8 0x0000 /* Transfer Word Size = 8 */ +#define WDSIZE_16 0x0004 /* Transfer Word Size = 16 */ +#define WDSIZE_32 0x0008 /* Transfer Word Size = 32 */ +#define DMA2D 0x0010 /* DMA Mode (2D/1D*) */ +#define RESTART 0x0020 /* DMA Buffer Clear */ +#define DI_SEL 0x0040 /* Data Interrupt Timing Select */ +#define DI_EN 0x0080 /* Data Interrupt Enable */ +#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */ +#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */ +#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */ +#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */ +#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */ +#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */ +#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */ +#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */ +#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */ +#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */ +#define FLOW_STOP 0x0000 /* Stop Mode */ +#define FLOW_AUTO 0x1000 /* Autobuffer Mode */ +#define FLOW_ARRAY 0x4000 /* Descriptor Array Mode */ +#define FLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */ +#define FLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */ + +/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */ +#define CTYPE 0x0040 /* DMA Channel Type Indicator (Memory/Peripheral*) */ +#define PMAP 0xF000 /* Peripheral Mapped To This Channel */ +#define PMAP_PPI 0x0000 /* PPI Port DMA */ +#define PMAP_EMACRX 0x1000 /* Ethernet Receive DMA */ +#define PMAP_EMACTX 0x2000 /* Ethernet Transmit DMA */ +#define PMAP_SPORT0RX 0x3000 /* SPORT0 Receive DMA */ +#define PMAP_SPORT0TX 0x4000 /* SPORT0 Transmit DMA */ +#define PMAP_SPORT1RX 0x5000 /* SPORT1 Receive DMA */ +#define PMAP_SPORT1TX 0x6000 /* SPORT1 Transmit DMA */ +#define PMAP_SPI 0x7000 /* SPI Port DMA */ +#define PMAP_UART0RX 0x8000 /* UART0 Port Receive DMA */ +#define PMAP_UART0TX 0x9000 /* UART0 Port Transmit DMA */ +#define PMAP_UART1RX 0xA000 /* UART1 Port Receive DMA */ +#define PMAP_UART1TX 0xB000 /* UART1 Port Transmit DMA */ + +/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */ +#define DMA_DONE 0x0001 /* DMA Completion Interrupt Status */ +#define DMA_ERR 0x0002 /* DMA Error Interrupt Status */ +#define DFETCH 0x0004 /* DMA Descriptor Fetch Indicator */ +#define DMA_RUN 0x0008 /* DMA Channel Running Indicator */ + +/* + * PARALLEL PERIPHERAL INTERFACE (PPI) MASKS + */ +/* PPI_CONTROL Masks */ +#define PORT_EN 0x0001 /* PPI Port Enable */ +#define PORT_DIR 0x0002 /* PPI Port Direction */ +#define XFR_TYPE 0x000C /* PPI Transfer Type */ +#define PORT_CFG 0x0030 /* PPI Port Configuration */ +#define FLD_SEL 0x0040 /* PPI Active Field Select */ +#define PACK_EN 0x0080 /* PPI Packing Mode */ +#define DMA32 0x0100 /* PPI 32-bit DMA Enable */ +#define SKIP_EN 0x0200 /* PPI Skip Element Enable */ +#define SKIP_EO 0x0400 /* PPI Skip Even/Odd Elements */ +#define DLEN_8 0x0000 /* Data Length = 8 Bits */ +#define DLEN_10 0x0800 /* Data Length = 10 Bits */ +#define DLEN_11 0x1000 /* Data Length = 11 Bits */ +#define DLEN_12 0x1800 /* Data Length = 12 Bits */ +#define DLEN_13 0x2000 /* Data Length = 13 Bits */ +#define DLEN_14 0x2800 /* Data Length = 14 Bits */ +#define DLEN_15 0x3000 /* Data Length = 15 Bits */ +#define DLEN_16 0x3800 /* Data Length = 16 Bits */ +#define POLC 0x4000 /* PPI Clock Polarity */ +#define POLS 0x8000 /* PPI Frame Sync Polarity */ + +/* PPI_STATUS Masks */ +#define FLD 0x0400 /* Field Indicator */ +#define FT_ERR 0x0800 /* Frame Track Error */ +#define OVR 0x1000 /* FIFO Overflow Error */ +#define UNDR 0x2000 /* FIFO Underrun Error */ +#define ERR_DET 0x4000 /* Error Detected Indicator */ +#define ERR_NCOR 0x8000 /* Error Not Corrected Indicator */ + +/* + * TWO-WIRE INTERFACE (TWI) MASKS + */ +/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y); ) */ +#define CLKLOW(x) ((x) & 0xFF) /* Periods Clock Is Held Low */ +#define CLKHI(y) (((y)&0xFF)<<0x8) /* Periods Before New Clock Low */ + +/* TWI_PRESCALE Masks */ +#define PRESCALE 0x007F /* SCLKs Per Internal Time Reference (10MHz) */ +#define TWI_ENA 0x0080 /* TWI Enable */ +#define SCCB 0x0200 /* SCCB Compatibility Enable */ + +/* TWI_SLAVE_CTRL Masks */ +#define SEN 0x0001 /* Slave Enable */ +#define SADD_LEN 0x0002 /* Slave Address Length */ +#define STDVAL 0x0004 /* Slave Transmit Data Valid */ +#define TSC_NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */ +#define GEN 0x0010 /* General Call Adrress Matching Enabled */ + +/* TWI_SLAVE_STAT Masks */ +#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */ +#define GCALL 0x0002 /* General Call Indicator */ + +/* TWI_MASTER_CTRL Masks */ +#define MEN 0x0001 /* Master Mode Enable */ +#define MADD_LEN 0x0002 /* Master Address Length */ +#define MDIR 0x0004 /* Master Transmit Direction (RX/TX*) */ +#define FAST 0x0008 /* Use Fast Mode Timing Specs */ +#define STOP 0x0010 /* Issue Stop Condition */ +#define RSTART 0x0020 /* Repeat Start or Stop* At End Of Transfer */ +#define DCNT 0x3FC0 /* Data Bytes To Transfer */ +#define SDAOVR 0x4000 /* Serial Data Override */ +#define SCLOVR 0x8000 /* Serial Clock Override */ + +/* TWI_MASTER_STAT Masks */ +#define MPROG 0x0001 /* Master Transfer In Progress */ +#define LOSTARB 0x0002 /* Lost Arbitration Indicator (Xfer Aborted) */ +#define ANAK 0x0004 /* Address Not Acknowledged */ +#define DNAK 0x0008 /* Data Not Acknowledged */ +#define BUFRDERR 0x0010 /* Buffer Read Error */ +#define BUFWRERR 0x0020 /* Buffer Write Error */ +#define SDASEN 0x0040 /* Serial Data Sense */ +#define SCLSEN 0x0080 /* Serial Clock Sense */ +#define BUSBUSY 0x0100 /* Bus Busy Indicator */ + +/* TWI_INT_SRC and TWI_INT_ENABLE Masks */ +#define SINIT 0x0001 /* Slave Transfer Initiated */ +#define SCOMP 0x0002 /* Slave Transfer Complete */ +#define SERR 0x0004 /* Slave Transfer Error */ +#define SOVF 0x0008 /* Slave Overflow */ +#define MCOMP 0x0010 /* Master Transfer Complete */ +#define MERR 0x0020 /* Master Transfer Error */ +#define XMTSERV 0x0040 /* Transmit FIFO Service */ +#define RCVSERV 0x0080 /* Receive FIFO Service */ + +/* TWI_FIFO_CTRL Masks */ +#define XMTFLUSH 0x0001 /* Transmit Buffer Flush */ +#define RCVFLUSH 0x0002 /* Receive Buffer Flush */ +#define XMTINTLEN 0x0004 /* Transmit Buffer Interrupt Length */ +#define RCVINTLEN 0x0008 /* Receive Buffer Interrupt Length */ + +/* TWI_FIFO_STAT Masks */ +#define XMTSTAT 0x0003 /* Transmit FIFO Status */ +#define XMT_EMPTY 0x0000 /* Transmit FIFO Empty */ +#define XMT_HALF 0x0001 /* Transmit FIFO Has 1 Byte To Write */ +#define XMT_FULL 0x0003 /* Transmit FIFO Full (2 Bytes To Write) */ + +#define RCVSTAT 0x000C /* Receive FIFO Status */ +#define RCV_EMPTY 0x0000 /* Receive FIFO Empty */ +#define RCV_HALF 0x0004 /* Receive FIFO Has 1 Byte To Read */ +#define RCV_FULL 0x000C /* Receive FIFO Full (2 Bytes To Read) */ + +/* + * CONTROLLER AREA NETWORK (CAN) MASKS + */ +/* CAN_CONTROL Masks */ +#define SRS 0x0001 /* Software Reset */ +#define DNM 0x0002 /* Device Net Mode */ +#define ABO 0x0004 /* Auto-Bus On Enable */ +#define TXPRIO 0x0008 /* TX Priority (Priority/Mailbox*) */ +#define WBA 0x0010 /* Wake-Up On CAN Bus Activity Enable */ +#define SMR 0x0020 /* Sleep Mode Request */ +#define CSR 0x0040 /* CAN Suspend Mode Request */ +#define CCR 0x0080 /* CAN Configuration Mode Request */ + +/* CAN_STATUS Masks */ +#define WT 0x0001 /* TX Warning Flag */ +#define WR 0x0002 /* RX Warning Flag */ +#define EP 0x0004 /* Error Passive Mode */ +#define EBO 0x0008 /* Error Bus Off Mode */ +#define SMA 0x0020 /* Sleep Mode Acknowledge */ +#define CSA 0x0040 /* Suspend Mode Acknowledge */ +#define CCA 0x0080 /* Configuration Mode Acknowledge */ +#define MBPTR 0x1F00 /* Mailbox Pointer */ +#define TRM 0x4000 /* Transmit Mode */ +#define REC 0x8000 /* Receive Mode */ + +/* CAN_CLOCK Masks */ +#define BRP 0x03FF /* Bit-Rate Pre-Scaler */ + +/* CAN_TIMING Masks */ +#define TSEG1 0x000F /* Time Segment 1 */ +#define TSEG2 0x0070 /* Time Segment 2 */ +#define SAM 0x0080 /* Sampling */ +#define SJW 0x0300 /* Synchronization Jump Width */ + +/* CAN_DEBUG Masks */ +#define DEC 0x0001 /* Disable CAN Error Counters */ +#define DRI 0x0002 /* Disable CAN RX Input */ +#define DTO 0x0004 /* Disable CAN TX Output */ +#define DIL 0x0008 /* Disable CAN Internal Loop */ +#define MAA 0x0010 /* Mode Auto-Acknowledge Enable */ +#define MRB 0x0020 /* Mode Read Back Enable */ +#define CDE 0x8000 /* CAN Debug Enable */ + +/* CAN_CEC Masks */ +#define RXECNT 0x00FF /* Receive Error Counter */ +#define TXECNT 0xFF00 /* Transmit Error Counter */ + +/* CAN_INTR Masks */ +#define MBRIF 0x0001 /* Mailbox Receive Interrupt */ +#define MBTIF 0x0002 /* Mailbox Transmit Interrupt */ +#define GIRQ 0x0004 /* Global Interrupt */ +#define SMACK 0x0008 /* Sleep Mode Acknowledge */ +#define CANTX 0x0040 /* CAN TX Bus Value */ +#define CANRX 0x0080 /* CAN RX Bus Value */ + +/* CAN_MBxx_ID1 and CAN_MBxx_ID0 Masks */ +#define DFC 0xFFFF /* Data Filtering Code (If Enabled) (ID0) */ +#define EXTID_LO 0xFFFF /* Lower 16 Bits of Extended Identifier (ID0) */ +#define EXTID_HI 0x0003 /* Upper 2 Bits of Extended Identifier (ID1) */ +#define BASEID 0x1FFC /* Base Identifier */ +#define IDE 0x2000 /* Identifier Extension */ +#define RTR 0x4000 /* Remote Frame Transmission Request */ +#define AME 0x8000 /* Acceptance Mask Enable */ + +/* CAN_MBxx_TIMESTAMP Masks */ +#define TSV 0xFFFF /* Timestamp */ + +/* CAN_MBxx_LENGTH Masks */ +#define DLC 0x000F /* Data Length Code */ + +/* CAN_AMxxH and CAN_AMxxL Masks */ +#define DFM 0xFFFF /* Data Field Mask (If Enabled) (CAN_AMxxL) */ +#define EXTID_LO 0xFFFF /* Lower 16 Bits of Extended Identifier (CAN_AMxxL) */ +#define EXTID_HI 0x0003 /* Upper 2 Bits of Extended Identifier (CAN_AMxxH) */ +#define BASEID 0x1FFC /* Base Identifier */ +#define AMIDE 0x2000 /* Acceptance Mask ID Extension Enable */ +#define FMD 0x4000 /* Full Mask Data Field Enable */ +#define FDF 0x8000 /* Filter On Data Field Enable */ + +/* CAN_MC1 Masks */ +#define MC0 0x0001 /* Enable Mailbox 0 */ +#define MC1 0x0002 /* Enable Mailbox 1 */ +#define MC2 0x0004 /* Enable Mailbox 2 */ +#define MC3 0x0008 /* Enable Mailbox 3 */ +#define MC4 0x0010 /* Enable Mailbox 4 */ +#define MC5 0x0020 /* Enable Mailbox 5 */ +#define MC6 0x0040 /* Enable Mailbox 6 */ +#define MC7 0x0080 /* Enable Mailbox 7 */ +#define MC8 0x0100 /* Enable Mailbox 8 */ +#define MC9 0x0200 /* Enable Mailbox 9 */ +#define MC10 0x0400 /* Enable Mailbox 10 */ +#define MC11 0x0800 /* Enable Mailbox 11 */ +#define MC12 0x1000 /* Enable Mailbox 12 */ +#define MC13 0x2000 /* Enable Mailbox 13 */ +#define MC14 0x4000 /* Enable Mailbox 14 */ +#define MC15 0x8000 /* Enable Mailbox 15 */ + +/* CAN_MC2 Masks */ +#define MC16 0x0001 /* Enable Mailbox 16 */ +#define MC17 0x0002 /* Enable Mailbox 17 */ +#define MC18 0x0004 /* Enable Mailbox 18 */ +#define MC19 0x0008 /* Enable Mailbox 19 */ +#define MC20 0x0010 /* Enable Mailbox 20 */ +#define MC21 0x0020 /* Enable Mailbox 21 */ +#define MC22 0x0040 /* Enable Mailbox 22 */ +#define MC23 0x0080 /* Enable Mailbox 23 */ +#define MC24 0x0100 /* Enable Mailbox 24 */ +#define MC25 0x0200 /* Enable Mailbox 25 */ +#define MC26 0x0400 /* Enable Mailbox 26 */ +#define MC27 0x0800 /* Enable Mailbox 27 */ +#define MC28 0x1000 /* Enable Mailbox 28 */ +#define MC29 0x2000 /* Enable Mailbox 29 */ +#define MC30 0x4000 /* Enable Mailbox 30 */ +#define MC31 0x8000 /* Enable Mailbox 31 */ + +/* CAN_MD1 Masks */ +#define MD0 0x0001 /* Enable Mailbox 0 For Receive */ +#define MD1 0x0002 /* Enable Mailbox 1 For Receive */ +#define MD2 0x0004 /* Enable Mailbox 2 For Receive */ +#define MD3 0x0008 /* Enable Mailbox 3 For Receive */ +#define MD4 0x0010 /* Enable Mailbox 4 For Receive */ +#define MD5 0x0020 /* Enable Mailbox 5 For Receive */ +#define MD6 0x0040 /* Enable Mailbox 6 For Receive */ +#define MD7 0x0080 /* Enable Mailbox 7 For Receive */ +#define MD8 0x0100 /* Enable Mailbox 8 For Receive */ +#define MD9 0x0200 /* Enable Mailbox 9 For Receive */ +#define MD10 0x0400 /* Enable Mailbox 10 For Receive */ +#define MD11 0x0800 /* Enable Mailbox 11 For Receive */ +#define MD12 0x1000 /* Enable Mailbox 12 For Receive */ +#define MD13 0x2000 /* Enable Mailbox 13 For Receive */ +#define MD14 0x4000 /* Enable Mailbox 14 For Receive */ +#define MD15 0x8000 /* Enable Mailbox 15 For Receive */ + +/* CAN_MD2 Masks */ +#define MD16 0x0001 /* Enable Mailbox 16 For Receive */ +#define MD17 0x0002 /* Enable Mailbox 17 For Receive */ +#define MD18 0x0004 /* Enable Mailbox 18 For Receive */ +#define MD19 0x0008 /* Enable Mailbox 19 For Receive */ +#define MD20 0x0010 /* Enable Mailbox 20 For Receive */ +#define MD21 0x0020 /* Enable Mailbox 21 For Receive */ +#define MD22 0x0040 /* Enable Mailbox 22 For Receive */ +#define MD23 0x0080 /* Enable Mailbox 23 For Receive */ +#define MD24 0x0100 /* Enable Mailbox 24 For Receive */ +#define MD25 0x0200 /* Enable Mailbox 25 For Receive */ +#define MD26 0x0400 /* Enable Mailbox 26 For Receive */ +#define MD27 0x0800 /* Enable Mailbox 27 For Receive */ +#define MD28 0x1000 /* Enable Mailbox 28 For Receive */ +#define MD29 0x2000 /* Enable Mailbox 29 For Receive */ +#define MD30 0x4000 /* Enable Mailbox 30 For Receive */ +#define MD31 0x8000 /* Enable Mailbox 31 For Receive */ + +/* CAN_RMP1 Masks */ +#define RMP0 0x0001 /* RX Message Pending In Mailbox 0 */ +#define RMP1 0x0002 /* RX Message Pending In Mailbox 1 */ +#define RMP2 0x0004 /* RX Message Pending In Mailbox 2 */ +#define RMP3 0x0008 /* RX Message Pending In Mailbox 3 */ +#define RMP4 0x0010 /* RX Message Pending In Mailbox 4 */ +#define RMP5 0x0020 /* RX Message Pending In Mailbox 5 */ +#define RMP6 0x0040 /* RX Message Pending In Mailbox 6 */ +#define RMP7 0x0080 /* RX Message Pending In Mailbox 7 */ +#define RMP8 0x0100 /* RX Message Pending In Mailbox 8 */ +#define RMP9 0x0200 /* RX Message Pending In Mailbox 9 */ +#define RMP10 0x0400 /* RX Message Pending In Mailbox 10 */ +#define RMP11 0x0800 /* RX Message Pending In Mailbox 11 */ +#define RMP12 0x1000 /* RX Message Pending In Mailbox 12 */ +#define RMP13 0x2000 /* RX Message Pending In Mailbox 13 */ +#define RMP14 0x4000 /* RX Message Pending In Mailbox 14 */ +#define RMP15 0x8000 /* RX Message Pending In Mailbox 15 */ + +/* CAN_RMP2 Masks */ +#define RMP16 0x0001 /* RX Message Pending In Mailbox 16 */ +#define RMP17 0x0002 /* RX Message Pending In Mailbox 17 */ +#define RMP18 0x0004 /* RX Message Pending In Mailbox 18 */ +#define RMP19 0x0008 /* RX Message Pending In Mailbox 19 */ +#define RMP20 0x0010 /* RX Message Pending In Mailbox 20 */ +#define RMP21 0x0020 /* RX Message Pending In Mailbox 21 */ +#define RMP22 0x0040 /* RX Message Pending In Mailbox 22 */ +#define RMP23 0x0080 /* RX Message Pending In Mailbox 23 */ +#define RMP24 0x0100 /* RX Message Pending In Mailbox 24 */ +#define RMP25 0x0200 /* RX Message Pending In Mailbox 25 */ +#define RMP26 0x0400 /* RX Message Pending In Mailbox 26 */ +#define RMP27 0x0800 /* RX Message Pending In Mailbox 27 */ +#define RMP28 0x1000 /* RX Message Pending In Mailbox 28 */ +#define RMP29 0x2000 /* RX Message Pending In Mailbox 29 */ +#define RMP30 0x4000 /* RX Message Pending In Mailbox 30 */ +#define RMP31 0x8000 /* RX Message Pending In Mailbox 31 */ + +/* CAN_RML1 Masks */ +#define RML0 0x0001 /* RX Message Lost In Mailbox 0 */ +#define RML1 0x0002 /* RX Message Lost In Mailbox 1 */ +#define RML2 0x0004 /* RX Message Lost In Mailbox 2 */ +#define RML3 0x0008 /* RX Message Lost In Mailbox 3 */ +#define RML4 0x0010 /* RX Message Lost In Mailbox 4 */ +#define RML5 0x0020 /* RX Message Lost In Mailbox 5 */ +#define RML6 0x0040 /* RX Message Lost In Mailbox 6 */ +#define RML7 0x0080 /* RX Message Lost In Mailbox 7 */ +#define RML8 0x0100 /* RX Message Lost In Mailbox 8 */ +#define RML9 0x0200 /* RX Message Lost In Mailbox 9 */ +#define RML10 0x0400 /* RX Message Lost In Mailbox 10 */ +#define RML11 0x0800 /* RX Message Lost In Mailbox 11 */ +#define RML12 0x1000 /* RX Message Lost In Mailbox 12 */ +#define RML13 0x2000 /* RX Message Lost In Mailbox 13 */ +#define RML14 0x4000 /* RX Message Lost In Mailbox 14 */ +#define RML15 0x8000 /* RX Message Lost In Mailbox 15 */ + +/* CAN_RML2 Masks */ +#define RML16 0x0001 /* RX Message Lost In Mailbox 16 */ +#define RML17 0x0002 /* RX Message Lost In Mailbox 17 */ +#define RML18 0x0004 /* RX Message Lost In Mailbox 18 */ +#define RML19 0x0008 /* RX Message Lost In Mailbox 19 */ +#define RML20 0x0010 /* RX Message Lost In Mailbox 20 */ +#define RML21 0x0020 /* RX Message Lost In Mailbox 21 */ +#define RML22 0x0040 /* RX Message Lost In Mailbox 22 */ +#define RML23 0x0080 /* RX Message Lost In Mailbox 23 */ +#define RML24 0x0100 /* RX Message Lost In Mailbox 24 */ +#define RML25 0x0200 /* RX Message Lost In Mailbox 25 */ +#define RML26 0x0400 /* RX Message Lost In Mailbox 26 */ +#define RML27 0x0800 /* RX Message Lost In Mailbox 27 */ +#define RML28 0x1000 /* RX Message Lost In Mailbox 28 */ +#define RML29 0x2000 /* RX Message Lost In Mailbox 29 */ +#define RML30 0x4000 /* RX Message Lost In Mailbox 30 */ +#define RML31 0x8000 /* RX Message Lost In Mailbox 31 */ + +/* CAN_OPSS1 Masks */ +#define OPSS0 0x0001 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 0 */ +#define OPSS1 0x0002 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 1 */ +#define OPSS2 0x0004 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 2 */ +#define OPSS3 0x0008 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 3 */ +#define OPSS4 0x0010 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 4 */ +#define OPSS5 0x0020 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 5 */ +#define OPSS6 0x0040 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 6 */ +#define OPSS7 0x0080 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 7 */ +#define OPSS8 0x0100 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 8 */ +#define OPSS9 0x0200 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 9 */ +#define OPSS10 0x0400 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 10 */ +#define OPSS11 0x0800 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 11 */ +#define OPSS12 0x1000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 12 */ +#define OPSS13 0x2000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 13 */ +#define OPSS14 0x4000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 14 */ +#define OPSS15 0x8000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 15 */ + +/* CAN_OPSS2 Masks */ +#define OPSS16 0x0001 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 16 */ +#define OPSS17 0x0002 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 17 */ +#define OPSS18 0x0004 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 18 */ +#define OPSS19 0x0008 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 19 */ +#define OPSS20 0x0010 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 20 */ +#define OPSS21 0x0020 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 21 */ +#define OPSS22 0x0040 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 22 */ +#define OPSS23 0x0080 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 23 */ +#define OPSS24 0x0100 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 24 */ +#define OPSS25 0x0200 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 25 */ +#define OPSS26 0x0400 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 26 */ +#define OPSS27 0x0800 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 27 */ +#define OPSS28 0x1000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 28 */ +#define OPSS29 0x2000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 29 */ +#define OPSS30 0x4000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 30 */ +#define OPSS31 0x8000 /* Enable RX Overwrite Protection or TX Single-Shot For Mailbox 31 */ + +/* CAN_TRR1 Masks */ +#define TRR0 0x0001 /* Deny But Don't Lock Access To Mailbox 0 */ +#define TRR1 0x0002 /* Deny But Don't Lock Access To Mailbox 1 */ +#define TRR2 0x0004 /* Deny But Don't Lock Access To Mailbox 2 */ +#define TRR3 0x0008 /* Deny But Don't Lock Access To Mailbox 3 */ +#define TRR4 0x0010 /* Deny But Don't Lock Access To Mailbox 4 */ +#define TRR5 0x0020 /* Deny But Don't Lock Access To Mailbox 5 */ +#define TRR6 0x0040 /* Deny But Don't Lock Access To Mailbox 6 */ +#define TRR7 0x0080 /* Deny But Don't Lock Access To Mailbox 7 */ +#define TRR8 0x0100 /* Deny But Don't Lock Access To Mailbox 8 */ +#define TRR9 0x0200 /* Deny But Don't Lock Access To Mailbox 9 */ +#define TRR10 0x0400 /* Deny But Don't Lock Access To Mailbox 10 */ +#define TRR11 0x0800 /* Deny But Don't Lock Access To Mailbox 11 */ +#define TRR12 0x1000 /* Deny But Don't Lock Access To Mailbox 12 */ +#define TRR13 0x2000 /* Deny But Don't Lock Access To Mailbox 13 */ +#define TRR14 0x4000 /* Deny But Don't Lock Access To Mailbox 14 */ +#define TRR15 0x8000 /* Deny But Don't Lock Access To Mailbox 15 */ + +/* CAN_TRR2 Masks */ +#define TRR16 0x0001 /* Deny But Don't Lock Access To Mailbox 16 */ +#define TRR17 0x0002 /* Deny But Don't Lock Access To Mailbox 17 */ +#define TRR18 0x0004 /* Deny But Don't Lock Access To Mailbox 18 */ +#define TRR19 0x0008 /* Deny But Don't Lock Access To Mailbox 19 */ +#define TRR20 0x0010 /* Deny But Don't Lock Access To Mailbox 20 */ +#define TRR21 0x0020 /* Deny But Don't Lock Access To Mailbox 21 */ +#define TRR22 0x0040 /* Deny But Don't Lock Access To Mailbox 22 */ +#define TRR23 0x0080 /* Deny But Don't Lock Access To Mailbox 23 */ +#define TRR24 0x0100 /* Deny But Don't Lock Access To Mailbox 24 */ +#define TRR25 0x0200 /* Deny But Don't Lock Access To Mailbox 25 */ +#define TRR26 0x0400 /* Deny But Don't Lock Access To Mailbox 26 */ +#define TRR27 0x0800 /* Deny But Don't Lock Access To Mailbox 27 */ +#define TRR28 0x1000 /* Deny But Don't Lock Access To Mailbox 28 */ +#define TRR29 0x2000 /* Deny But Don't Lock Access To Mailbox 29 */ +#define TRR30 0x4000 /* Deny But Don't Lock Access To Mailbox 30 */ +#define TRR31 0x8000 /* Deny But Don't Lock Access To Mailbox 31 */ + +/* CAN_TRS1 Masks */ +#define TRS0 0x0001 /* Remote Frame Request For Mailbox 0 */ +#define TRS1 0x0002 /* Remote Frame Request For Mailbox 1 */ +#define TRS2 0x0004 /* Remote Frame Request For Mailbox 2 */ +#define TRS3 0x0008 /* Remote Frame Request For Mailbox 3 */ +#define TRS4 0x0010 /* Remote Frame Request For Mailbox 4 */ +#define TRS5 0x0020 /* Remote Frame Request For Mailbox 5 */ +#define TRS6 0x0040 /* Remote Frame Request For Mailbox 6 */ +#define TRS7 0x0080 /* Remote Frame Request For Mailbox 7 */ +#define TRS8 0x0100 /* Remote Frame Request For Mailbox 8 */ +#define TRS9 0x0200 /* Remote Frame Request For Mailbox 9 */ +#define TRS10 0x0400 /* Remote Frame Request For Mailbox 10 */ +#define TRS11 0x0800 /* Remote Frame Request For Mailbox 11 */ +#define TRS12 0x1000 /* Remote Frame Request For Mailbox 12 */ +#define TRS13 0x2000 /* Remote Frame Request For Mailbox 13 */ +#define TRS14 0x4000 /* Remote Frame Request For Mailbox 14 */ +#define TRS15 0x8000 /* Remote Frame Request For Mailbox 15 */ + +/* CAN_TRS2 Masks */ +#define TRS16 0x0001 /* Remote Frame Request For Mailbox 16 */ +#define TRS17 0x0002 /* Remote Frame Request For Mailbox 17 */ +#define TRS18 0x0004 /* Remote Frame Request For Mailbox 18 */ +#define TRS19 0x0008 /* Remote Frame Request For Mailbox 19 */ +#define TRS20 0x0010 /* Remote Frame Request For Mailbox 20 */ +#define TRS21 0x0020 /* Remote Frame Request For Mailbox 21 */ +#define TRS22 0x0040 /* Remote Frame Request For Mailbox 22 */ +#define TRS23 0x0080 /* Remote Frame Request For Mailbox 23 */ +#define TRS24 0x0100 /* Remote Frame Request For Mailbox 24 */ +#define TRS25 0x0200 /* Remote Frame Request For Mailbox 25 */ +#define TRS26 0x0400 /* Remote Frame Request For Mailbox 26 */ +#define TRS27 0x0800 /* Remote Frame Request For Mailbox 27 */ +#define TRS28 0x1000 /* Remote Frame Request For Mailbox 28 */ +#define TRS29 0x2000 /* Remote Frame Request For Mailbox 29 */ +#define TRS30 0x4000 /* Remote Frame Request For Mailbox 30 */ +#define TRS31 0x8000 /* Remote Frame Request For Mailbox 31 */ + +/* CAN_AA1 Masks */ +#define AA0 0x0001 /* Aborted Message In Mailbox 0 */ +#define AA1 0x0002 /* Aborted Message In Mailbox 1 */ +#define AA2 0x0004 /* Aborted Message In Mailbox 2 */ +#define AA3 0x0008 /* Aborted Message In Mailbox 3 */ +#define AA4 0x0010 /* Aborted Message In Mailbox 4 */ +#define AA5 0x0020 /* Aborted Message In Mailbox 5 */ +#define AA6 0x0040 /* Aborted Message In Mailbox 6 */ +#define AA7 0x0080 /* Aborted Message In Mailbox 7 */ +#define AA8 0x0100 /* Aborted Message In Mailbox 8 */ +#define AA9 0x0200 /* Aborted Message In Mailbox 9 */ +#define AA10 0x0400 /* Aborted Message In Mailbox 10 */ +#define AA11 0x0800 /* Aborted Message In Mailbox 11 */ +#define AA12 0x1000 /* Aborted Message In Mailbox 12 */ +#define AA13 0x2000 /* Aborted Message In Mailbox 13 */ +#define AA14 0x4000 /* Aborted Message In Mailbox 14 */ +#define AA15 0x8000 /* Aborted Message In Mailbox 15 */ + +/* CAN_AA2 Masks */ +#define AA16 0x0001 /* Aborted Message In Mailbox 16 */ +#define AA17 0x0002 /* Aborted Message In Mailbox 17 */ +#define AA18 0x0004 /* Aborted Message In Mailbox 18 */ +#define AA19 0x0008 /* Aborted Message In Mailbox 19 */ +#define AA20 0x0010 /* Aborted Message In Mailbox 20 */ +#define AA21 0x0020 /* Aborted Message In Mailbox 21 */ +#define AA22 0x0040 /* Aborted Message In Mailbox 22 */ +#define AA23 0x0080 /* Aborted Message In Mailbox 23 */ +#define AA24 0x0100 /* Aborted Message In Mailbox 24 */ +#define AA25 0x0200 /* Aborted Message In Mailbox 25 */ +#define AA26 0x0400 /* Aborted Message In Mailbox 26 */ +#define AA27 0x0800 /* Aborted Message In Mailbox 27 */ +#define AA28 0x1000 /* Aborted Message In Mailbox 28 */ +#define AA29 0x2000 /* Aborted Message In Mailbox 29 */ +#define AA30 0x4000 /* Aborted Message In Mailbox 30 */ +#define AA31 0x8000 /* Aborted Message In Mailbox 31 */ + +/* CAN_TA1 Masks */ +#define TA0 0x0001 /* Transmit Successful From Mailbox 0 */ +#define TA1 0x0002 /* Transmit Successful From Mailbox 1 */ +#define TA2 0x0004 /* Transmit Successful From Mailbox 2 */ +#define TA3 0x0008 /* Transmit Successful From Mailbox 3 */ +#define TA4 0x0010 /* Transmit Successful From Mailbox 4 */ +#define TA5 0x0020 /* Transmit Successful From Mailbox 5 */ +#define TA6 0x0040 /* Transmit Successful From Mailbox 6 */ +#define TA7 0x0080 /* Transmit Successful From Mailbox 7 */ +#define TA8 0x0100 /* Transmit Successful From Mailbox 8 */ +#define TA9 0x0200 /* Transmit Successful From Mailbox 9 */ +#define TA10 0x0400 /* Transmit Successful From Mailbox 10 */ +#define TA11 0x0800 /* Transmit Successful From Mailbox 11 */ +#define TA12 0x1000 /* Transmit Successful From Mailbox 12 */ +#define TA13 0x2000 /* Transmit Successful From Mailbox 13 */ +#define TA14 0x4000 /* Transmit Successful From Mailbox 14 */ +#define TA15 0x8000 /* Transmit Successful From Mailbox 15 */ + +/* CAN_TA2 Masks */ +#define TA16 0x0001 /* Transmit Successful From Mailbox 16 */ +#define TA17 0x0002 /* Transmit Successful From Mailbox 17 */ +#define TA18 0x0004 /* Transmit Successful From Mailbox 18 */ +#define TA19 0x0008 /* Transmit Successful From Mailbox 19 */ +#define TA20 0x0010 /* Transmit Successful From Mailbox 20 */ +#define TA21 0x0020 /* Transmit Successful From Mailbox 21 */ +#define TA22 0x0040 /* Transmit Successful From Mailbox 22 */ +#define TA23 0x0080 /* Transmit Successful From Mailbox 23 */ +#define TA24 0x0100 /* Transmit Successful From Mailbox 24 */ +#define TA25 0x0200 /* Transmit Successful From Mailbox 25 */ +#define TA26 0x0400 /* Transmit Successful From Mailbox 26 */ +#define TA27 0x0800 /* Transmit Successful From Mailbox 27 */ +#define TA28 0x1000 /* Transmit Successful From Mailbox 28 */ +#define TA29 0x2000 /* Transmit Successful From Mailbox 29 */ +#define TA30 0x4000 /* Transmit Successful From Mailbox 30 */ +#define TA31 0x8000 /* Transmit Successful From Mailbox 31 */ + +/* CAN_MBTD Masks */ +#define TDPTR 0x001F /* Mailbox To Temporarily Disable */ +#define TDA 0x0040 /* Temporary Disable Acknowledge */ +#define TDR 0x0080 /* Temporary Disable Request */ + +/* CAN_RFH1 Masks */ +#define RFH0 0x0001 /* Enable Automatic Remote Frame Handling For Mailbox 0 */ +#define RFH1 0x0002 /* Enable Automatic Remote Frame Handling For Mailbox 1 */ +#define RFH2 0x0004 /* Enable Automatic Remote Frame Handling For Mailbox 2 */ +#define RFH3 0x0008 /* Enable Automatic Remote Frame Handling For Mailbox 3 */ +#define RFH4 0x0010 /* Enable Automatic Remote Frame Handling For Mailbox 4 */ +#define RFH5 0x0020 /* Enable Automatic Remote Frame Handling For Mailbox 5 */ +#define RFH6 0x0040 /* Enable Automatic Remote Frame Handling For Mailbox 6 */ +#define RFH7 0x0080 /* Enable Automatic Remote Frame Handling For Mailbox 7 */ +#define RFH8 0x0100 /* Enable Automatic Remote Frame Handling For Mailbox 8 */ +#define RFH9 0x0200 /* Enable Automatic Remote Frame Handling For Mailbox 9 */ +#define RFH10 0x0400 /* Enable Automatic Remote Frame Handling For Mailbox 10 */ +#define RFH11 0x0800 /* Enable Automatic Remote Frame Handling For Mailbox 11 */ +#define RFH12 0x1000 /* Enable Automatic Remote Frame Handling For Mailbox 12 */ +#define RFH13 0x2000 /* Enable Automatic Remote Frame Handling For Mailbox 13 */ +#define RFH14 0x4000 /* Enable Automatic Remote Frame Handling For Mailbox 14 */ +#define RFH15 0x8000 /* Enable Automatic Remote Frame Handling For Mailbox 15 */ + +/* CAN_RFH2 Masks */ +#define RFH16 0x0001 /* Enable Automatic Remote Frame Handling For Mailbox 16 */ +#define RFH17 0x0002 /* Enable Automatic Remote Frame Handling For Mailbox 17 */ +#define RFH18 0x0004 /* Enable Automatic Remote Frame Handling For Mailbox 18 */ +#define RFH19 0x0008 /* Enable Automatic Remote Frame Handling For Mailbox 19 */ +#define RFH20 0x0010 /* Enable Automatic Remote Frame Handling For Mailbox 20 */ +#define RFH21 0x0020 /* Enable Automatic Remote Frame Handling For Mailbox 21 */ +#define RFH22 0x0040 /* Enable Automatic Remote Frame Handling For Mailbox 22 */ +#define RFH23 0x0080 /* Enable Automatic Remote Frame Handling For Mailbox 23 */ +#define RFH24 0x0100 /* Enable Automatic Remote Frame Handling For Mailbox 24 */ +#define RFH25 0x0200 /* Enable Automatic Remote Frame Handling For Mailbox 25 */ +#define RFH26 0x0400 /* Enable Automatic Remote Frame Handling For Mailbox 26 */ +#define RFH27 0x0800 /* Enable Automatic Remote Frame Handling For Mailbox 27 */ +#define RFH28 0x1000 /* Enable Automatic Remote Frame Handling For Mailbox 28 */ +#define RFH29 0x2000 /* Enable Automatic Remote Frame Handling For Mailbox 29 */ +#define RFH30 0x4000 /* Enable Automatic Remote Frame Handling For Mailbox 30 */ +#define RFH31 0x8000 /* Enable Automatic Remote Frame Handling For Mailbox 31 */ + +/* CAN_MBTIF1 Masks */ +#define MBTIF0 0x0001 /* TX Interrupt Active In Mailbox 0 */ +#define MBTIF1 0x0002 /* TX Interrupt Active In Mailbox 1 */ +#define MBTIF2 0x0004 /* TX Interrupt Active In Mailbox 2 */ +#define MBTIF3 0x0008 /* TX Interrupt Active In Mailbox 3 */ +#define MBTIF4 0x0010 /* TX Interrupt Active In Mailbox 4 */ +#define MBTIF5 0x0020 /* TX Interrupt Active In Mailbox 5 */ +#define MBTIF6 0x0040 /* TX Interrupt Active In Mailbox 6 */ +#define MBTIF7 0x0080 /* TX Interrupt Active In Mailbox 7 */ +#define MBTIF8 0x0100 /* TX Interrupt Active In Mailbox 8 */ +#define MBTIF9 0x0200 /* TX Interrupt Active In Mailbox 9 */ +#define MBTIF10 0x0400 /* TX Interrupt Active In Mailbox 10 */ +#define MBTIF11 0x0800 /* TX Interrupt Active In Mailbox 11 */ +#define MBTIF12 0x1000 /* TX Interrupt Active In Mailbox 12 */ +#define MBTIF13 0x2000 /* TX Interrupt Active In Mailbox 13 */ +#define MBTIF14 0x4000 /* TX Interrupt Active In Mailbox 14 */ +#define MBTIF15 0x8000 /* TX Interrupt Active In Mailbox 15 */ + +/* CAN_MBTIF2 Masks */ +#define MBTIF16 0x0001 /* TX Interrupt Active In Mailbox 16 */ +#define MBTIF17 0x0002 /* TX Interrupt Active In Mailbox 17 */ +#define MBTIF18 0x0004 /* TX Interrupt Active In Mailbox 18 */ +#define MBTIF19 0x0008 /* TX Interrupt Active In Mailbox 19 */ +#define MBTIF20 0x0010 /* TX Interrupt Active In Mailbox 20 */ +#define MBTIF21 0x0020 /* TX Interrupt Active In Mailbox 21 */ +#define MBTIF22 0x0040 /* TX Interrupt Active In Mailbox 22 */ +#define MBTIF23 0x0080 /* TX Interrupt Active In Mailbox 23 */ +#define MBTIF24 0x0100 /* TX Interrupt Active In Mailbox 24 */ +#define MBTIF25 0x0200 /* TX Interrupt Active In Mailbox 25 */ +#define MBTIF26 0x0400 /* TX Interrupt Active In Mailbox 26 */ +#define MBTIF27 0x0800 /* TX Interrupt Active In Mailbox 27 */ +#define MBTIF28 0x1000 /* TX Interrupt Active In Mailbox 28 */ +#define MBTIF29 0x2000 /* TX Interrupt Active In Mailbox 29 */ +#define MBTIF30 0x4000 /* TX Interrupt Active In Mailbox 30 */ +#define MBTIF31 0x8000 /* TX Interrupt Active In Mailbox 31 */ + +/* CAN_MBRIF1 Masks */ +#define MBRIF0 0x0001 /* RX Interrupt Active In Mailbox 0 */ +#define MBRIF1 0x0002 /* RX Interrupt Active In Mailbox 1 */ +#define MBRIF2 0x0004 /* RX Interrupt Active In Mailbox 2 */ +#define MBRIF3 0x0008 /* RX Interrupt Active In Mailbox 3 */ +#define MBRIF4 0x0010 /* RX Interrupt Active In Mailbox 4 */ +#define MBRIF5 0x0020 /* RX Interrupt Active In Mailbox 5 */ +#define MBRIF6 0x0040 /* RX Interrupt Active In Mailbox 6 */ +#define MBRIF7 0x0080 /* RX Interrupt Active In Mailbox 7 */ +#define MBRIF8 0x0100 /* RX Interrupt Active In Mailbox 8 */ +#define MBRIF9 0x0200 /* RX Interrupt Active In Mailbox 9 */ +#define MBRIF10 0x0400 /* RX Interrupt Active In Mailbox 10 */ +#define MBRIF11 0x0800 /* RX Interrupt Active In Mailbox 11 */ +#define MBRIF12 0x1000 /* RX Interrupt Active In Mailbox 12 */ +#define MBRIF13 0x2000 /* RX Interrupt Active In Mailbox 13 */ +#define MBRIF14 0x4000 /* RX Interrupt Active In Mailbox 14 */ +#define MBRIF15 0x8000 /* RX Interrupt Active In Mailbox 15 */ + +/* CAN_MBRIF2 Masks */ +#define MBRIF16 0x0001 /* RX Interrupt Active In Mailbox 16 */ +#define MBRIF17 0x0002 /* RX Interrupt Active In Mailbox 17 */ +#define MBRIF18 0x0004 /* RX Interrupt Active In Mailbox 18 */ +#define MBRIF19 0x0008 /* RX Interrupt Active In Mailbox 19 */ +#define MBRIF20 0x0010 /* RX Interrupt Active In Mailbox 20 */ +#define MBRIF21 0x0020 /* RX Interrupt Active In Mailbox 21 */ +#define MBRIF22 0x0040 /* RX Interrupt Active In Mailbox 22 */ +#define MBRIF23 0x0080 /* RX Interrupt Active In Mailbox 23 */ +#define MBRIF24 0x0100 /* RX Interrupt Active In Mailbox 24 */ +#define MBRIF25 0x0200 /* RX Interrupt Active In Mailbox 25 */ +#define MBRIF26 0x0400 /* RX Interrupt Active In Mailbox 26 */ +#define MBRIF27 0x0800 /* RX Interrupt Active In Mailbox 27 */ +#define MBRIF28 0x1000 /* RX Interrupt Active In Mailbox 28 */ +#define MBRIF29 0x2000 /* RX Interrupt Active In Mailbox 29 */ +#define MBRIF30 0x4000 /* RX Interrupt Active In Mailbox 30 */ +#define MBRIF31 0x8000 /* RX Interrupt Active In Mailbox 31 */ + +/* CAN_MBIM1 Masks */ +#define MBIM0 0x0001 /* Enable Interrupt For Mailbox 0 */ +#define MBIM1 0x0002 /* Enable Interrupt For Mailbox 1 */ +#define MBIM2 0x0004 /* Enable Interrupt For Mailbox 2 */ +#define MBIM3 0x0008 /* Enable Interrupt For Mailbox 3 */ +#define MBIM4 0x0010 /* Enable Interrupt For Mailbox 4 */ +#define MBIM5 0x0020 /* Enable Interrupt For Mailbox 5 */ +#define MBIM6 0x0040 /* Enable Interrupt For Mailbox 6 */ +#define MBIM7 0x0080 /* Enable Interrupt For Mailbox 7 */ +#define MBIM8 0x0100 /* Enable Interrupt For Mailbox 8 */ +#define MBIM9 0x0200 /* Enable Interrupt For Mailbox 9 */ +#define MBIM10 0x0400 /* Enable Interrupt For Mailbox 10 */ +#define MBIM11 0x0800 /* Enable Interrupt For Mailbox 11 */ +#define MBIM12 0x1000 /* Enable Interrupt For Mailbox 12 */ +#define MBIM13 0x2000 /* Enable Interrupt For Mailbox 13 */ +#define MBIM14 0x4000 /* Enable Interrupt For Mailbox 14 */ +#define MBIM15 0x8000 /* Enable Interrupt For Mailbox 15 */ + +/* CAN_MBIM2 Masks */ +#define MBIM16 0x0001 /* Enable Interrupt For Mailbox 16 */ +#define MBIM17 0x0002 /* Enable Interrupt For Mailbox 17 */ +#define MBIM18 0x0004 /* Enable Interrupt For Mailbox 18 */ +#define MBIM19 0x0008 /* Enable Interrupt For Mailbox 19 */ +#define MBIM20 0x0010 /* Enable Interrupt For Mailbox 20 */ +#define MBIM21 0x0020 /* Enable Interrupt For Mailbox 21 */ +#define MBIM22 0x0040 /* Enable Interrupt For Mailbox 22 */ +#define MBIM23 0x0080 /* Enable Interrupt For Mailbox 23 */ +#define MBIM24 0x0100 /* Enable Interrupt For Mailbox 24 */ +#define MBIM25 0x0200 /* Enable Interrupt For Mailbox 25 */ +#define MBIM26 0x0400 /* Enable Interrupt For Mailbox 26 */ +#define MBIM27 0x0800 /* Enable Interrupt For Mailbox 27 */ +#define MBIM28 0x1000 /* Enable Interrupt For Mailbox 28 */ +#define MBIM29 0x2000 /* Enable Interrupt For Mailbox 29 */ +#define MBIM30 0x4000 /* Enable Interrupt For Mailbox 30 */ +#define MBIM31 0x8000 /* Enable Interrupt For Mailbox 31 */ + +/* CAN_GIM Masks */ +#define EWTIM 0x0001 /* Enable TX Error Count Interrupt */ +#define EWRIM 0x0002 /* Enable RX Error Count Interrupt */ +#define EPIM 0x0004 /* Enable Error-Passive Mode Interrupt */ +#define BOIM 0x0008 /* Enable Bus Off Interrupt */ +#define WUIM 0x0010 /* Enable Wake-Up Interrupt */ +#define UIAIM 0x0020 /* Enable Access To Unimplemented Address Interrupt */ +#define AAIM 0x0040 /* Enable Abort Acknowledge Interrupt */ +#define RMLIM 0x0080 /* Enable RX Message Lost Interrupt */ +#define UCEIM 0x0100 /* Enable Universal Counter Overflow Interrupt */ +#define EXTIM 0x0200 /* Enable External Trigger Output Interrupt */ +#define ADIM 0x0400 /* Enable Access Denied Interrupt */ + +/* CAN_GIS Masks */ +#define EWTIS 0x0001 /* TX Error Count IRQ Status */ +#define EWRIS 0x0002 /* RX Error Count IRQ Status */ +#define EPIS 0x0004 /* Error-Passive Mode IRQ Status */ +#define BOIS 0x0008 /* Bus Off IRQ Status */ +#define WUIS 0x0010 /* Wake-Up IRQ Status */ +#define UIAIS 0x0020 /* Access To Unimplemented Address IRQ Status */ +#define AAIS 0x0040 /* Abort Acknowledge IRQ Status */ +#define RMLIS 0x0080 /* RX Message Lost IRQ Status */ +#define UCEIS 0x0100 /* Universal Counter Overflow IRQ Status */ +#define EXTIS 0x0200 /* External Trigger Output IRQ Status */ +#define ADIS 0x0400 /* Access Denied IRQ Status */ + +/* CAN_GIF Masks */ +#define EWTIF 0x0001 /* TX Error Count IRQ Flag */ +#define EWRIF 0x0002 /* RX Error Count IRQ Flag */ +#define EPIF 0x0004 /* Error-Passive Mode IRQ Flag */ +#define BOIF 0x0008 /* Bus Off IRQ Flag */ +#define WUIF 0x0010 /* Wake-Up IRQ Flag */ +#define UIAIF 0x0020 /* Access To Unimplemented Address IRQ Flag */ +#define AAIF 0x0040 /* Abort Acknowledge IRQ Flag */ +#define RMLIF 0x0080 /* RX Message Lost IRQ Flag */ +#define UCEIF 0x0100 /* Universal Counter Overflow IRQ Flag */ +#define EXTIF 0x0200 /* External Trigger Output IRQ Flag */ +#define ADIF 0x0400 /* Access Denied IRQ Flag */ + +/* CAN_UCCNF Masks */ +#define UCCNF 0x000F /* Universal Counter Mode */ +#define UC_STAMP 0x0001 /* Timestamp Mode */ +#define UC_WDOG 0x0002 /* Watchdog Mode */ +#define UC_AUTOTX 0x0003 /* Auto-Transmit Mode */ +#define UC_ERROR 0x0006 /* CAN Error Frame Count */ +#define UC_OVER 0x0007 /* CAN Overload Frame Count */ +#define UC_LOST 0x0008 /* Arbitration Lost During TX Count */ +#define UC_AA 0x0009 /* TX Abort Count */ +#define UC_TA 0x000A /* TX Successful Count */ +#define UC_REJECT 0x000B /* RX Message Rejected Count */ +#define UC_RML 0x000C /* RX Message Lost Count */ +#define UC_RX 0x000D /* Total Successful RX Messages Count */ +#define UC_RMP 0x000E /* Successful RX W/Matching ID Count */ +#define UC_ALL 0x000F /* Correct Message On CAN Bus Line Count */ +#define UCRC 0x0020 /* Universal Counter Reload/Clear */ +#define UCCT 0x0040 /* Universal Counter CAN Trigger */ +#define UCE 0x0080 /* Universal Counter Enable */ + +/* CAN_ESR Masks */ +#define ACKE 0x0004 /* Acknowledge Error */ +#define SER 0x0008 /* Stuff Error */ +#define CRCE 0x0010 /* CRC Error */ +#define SA0 0x0020 /* Stuck At Dominant Error */ +#define BEF 0x0040 /* Bit Error Flag */ +#define FER 0x0080 /* Form Error Flag */ + +/* CAN_EWR Masks */ +#define EWLREC 0x00FF /* RX Error Count Limit (For EWRIS) */ +#define EWLTEC 0xFF00 /* TX Error Count Limit (For EWTIS) */ + +/* + * PIN CONTROL REGISTER MASKS + */ +/* PORT_MUX Masks */ +#define PJSE 0x0001 /* Port J SPI/SPORT Enable */ +#define PJSE_SPORT 0x0000 /* Enable TFS0/DT0PRI */ +#define PJSE_SPI 0x0001 /* Enable SPI_SSEL3:2 */ + +#define PJCE(x) (((x)&0x3)<<1) /* Port J CAN/SPI/SPORT Enable */ +#define PJCE_SPORT 0x0000 /* Enable DR0SEC/DT0SEC */ +#define PJCE_CAN 0x0002 /* Enable CAN RX/TX */ +#define PJCE_SPI 0x0004 /* Enable SPI_SSEL7 */ + +#define PFDE 0x0008 /* Port F DMA Request Enable */ +#define PGDE_UART 0x0000 /* Enable UART0 RX/TX */ +#define PGDE_DMA 0x0008 /* Enable DMAR1:0 */ + +#define PFTE 0x0010 /* Port F Timer Enable */ +#define PFTE_UART 0x0000 /* Enable UART1 RX/TX */ +#define PFTE_TIMER 0x0010 /* Enable TMR7:6 */ + +#define PFS6E 0x0020 /* Port F SPI SSEL 6 Enable */ +#define PFS6E_TIMER 0x0000 /* Enable TMR5 */ +#define PFS6E_SPI 0x0020 /* Enable SPI_SSEL6 */ + +#define PFS5E 0x0040 /* Port F SPI SSEL 5 Enable */ +#define PFS5E_TIMER 0x0000 /* Enable TMR4 */ +#define PFS5E_SPI 0x0040 /* Enable SPI_SSEL5 */ + +#define PFS4E 0x0080 /* Port F SPI SSEL 4 Enable */ +#define PFS4E_TIMER 0x0000 /* Enable TMR3 */ +#define PFS4E_SPI 0x0080 /* Enable SPI_SSEL4 */ + +#define PFFE 0x0100 /* Port F PPI Frame Sync Enable */ +#define PFFE_TIMER 0x0000 /* Enable TMR2 */ +#define PFFE_PPI 0x0100 /* Enable PPI FS3 */ + +#define PGSE 0x0200 /* Port G SPORT1 Secondary Enable */ +#define PGSE_PPI 0x0000 /* Enable PPI D9:8 */ +#define PGSE_SPORT 0x0200 /* Enable DR1SEC/DT1SEC */ + +#define PGRE 0x0400 /* Port G SPORT1 Receive Enable */ +#define PGRE_PPI 0x0000 /* Enable PPI D12:10 */ +#define PGRE_SPORT 0x0400 /* Enable DR1PRI/RFS1/RSCLK1 */ + +#define PGTE 0x0800 /* Port G SPORT1 Transmit Enable */ +#define PGTE_PPI 0x0000 /* Enable PPI D15:13 */ +#define PGTE_SPORT 0x0800 /* Enable DT1PRI/TFS1/TSCLK1 */ + +/* + * HANDSHAKE DMA (HDMA) MASKS + */ +/* HDMAx_CTL Masks */ +#define HMDMAEN 0x0001 /* Enable Handshake DMA 0/1 */ +#define REP 0x0002 /* HDMA Request Polarity */ +#define UTE 0x0004 /* Urgency Threshold Enable */ +#define OIE 0x0010 /* Overflow Interrupt Enable */ +#define BDIE 0x0020 /* Block Done Interrupt Enable */ +#define MBDI 0x0040 /* Mask Block Done IRQ If Pending ECNT */ +#define DRQ 0x0300 /* HDMA Request Type */ +#define DRQ_NONE 0x0000 /* No Request */ +#define DRQ_SINGLE 0x0100 /* Channels Request Single */ +#define DRQ_MULTI 0x0200 /* Channels Request Multi (Default) */ +#define DRQ_URGENT 0x0300 /* Channels Request Multi Urgent */ +#define RBC 0x1000 /* Reload BCNT With IBCNT */ +#define PS 0x2000 /* HDMA Pin Status */ +#define OI 0x4000 /* Overflow Interrupt Generated */ +#define BDI 0x8000 /* Block Done Interrupt Generated */ + +/* entry addresses of the user-callable Boot ROM functions */ + +#define _BOOTROM_RESET 0xEF000000 +#define _BOOTROM_FINAL_INIT 0xEF000002 +#define _BOOTROM_DO_MEMORY_DMA 0xEF000006 +#define _BOOTROM_BOOT_DXE_FLASH 0xEF000008 +#define _BOOTROM_BOOT_DXE_SPI 0xEF00000A +#define _BOOTROM_BOOT_DXE_TWI 0xEF00000C +#define _BOOTROM_GET_DXE_ADDRESS_FLASH 0xEF000010 +#define _BOOTROM_GET_DXE_ADDRESS_SPI 0xEF000012 +#define _BOOTROM_GET_DXE_ADDRESS_TWI 0xEF000014 + +#endif /* _DEF_BF534_H */ diff --git a/include/asm-blackfin/arch-bf537/defBF537.h b/include/asm-blackfin/arch-bf537/defBF537.h new file mode 100644 index 0000000..8d16c37 --- /dev/null +++ b/include/asm-blackfin/arch-bf537/defBF537.h @@ -0,0 +1,488 @@ +/* + * Copyright (C) 2004-2005 Analog Devices Inc., All Rights Reserved. + * + *********************************************************************************** + * + * This include file contains a list of macro "defines" to enable the programmer + * to use symbolic names for register-access and bit-manipulation. + * + * ---------------------------- + * revision 0.1 + * date: 2004/03/01 21:23:01; author: joeb + * Initial revision + * + * ---------------------------- + * revision 0.2 + * date: 2004/05/15 16:30:00; author: joeb + * comments: removed I2C/IIC references, changed GPIO sections + * + * ---------------------------- + * revision 0.3 + * date: 2004/06/08 12:25:00; author: joeb + * comments: fixed mis-mapped TIMER registers, changed TWI register names, fixed + * FLAG references in GPIO register names + * + * ---------------------------- + * revision 0.4 + * date: 2004/06/09 2:25:00; author: joeb + * comments: fixed bit-defines for EMAC section, renamed EMAC count registers, + * combined 2 Timer status registers into one + * + * ---------------------------- + * revision 0.5 + * date: 2004/08/10 10:25:00; author: joeb + * comments: Renamed EMAC wake-up registers, changed bit-names in EMAC registers + * + * ---------------------------- + * revision 0.6 + * date: 2004/08/17 16:25:00; author: joeb + * comments: Renamed TWI_INT_ENABLE to TWI_INT_MASK + * + * ---------------------------- + * revision 0.7 + * date: 2004/08/18 13:21:00; author: joeb + * comments: Renamed GPIO registers to remove _D, _S, _C, _T suffixes + * + * ---------------------------- + * revision 0.8 + * date: 2004/08/20 10:24:00; author: joeb + * comments: Renamed External DMA to Handshake MDMA + * + * ---------------------------- + * revision 0.9 + * date: 2004/08/23 13:42:00; author: joeb + * comments: Renamed Handshake DMA Register Set + * + * ---------------------------- + * revision 0.10 + * date: 2004/09/07 11:21:00; author: joeb + * comments: Fixed EMAC TX/RX DMA Priority (DMA and SIC Bit Names) + * + * ---------------------------- + * revision 0.11 + * date: 2004/09/28 15:14:00; author: joeb + * comments: Fixed CAN Mailbox Area + * + * ---------------------------- + * revision 0.12 + * date: 2004/10/27 13:18:00; author: joeb + * comments: Added IEEE EMAC Register Support + * + * ---------------------------- + * revision 0.13 + * date: 2004/10/28 15:40:00; author: joeb + * comments: Shortened EMAC Count Register Names + * + * ---------------------------- + * revision 0.14 + * date: 2004/11/09 10:45:00; author: joeb + * comments: Fixed WDSIZE macros + * + * ---------------------------- + * revision 0.15 + * date: 2004/11/18 07:45:00; author: joeb + * comments: Fixed TIMER_STATUS register, added EMAC macros + * + * ---------------------------- + * revision 0.16 + * date: 2004/12/13 11:05:00; author: joeb + * comments: Removed HI/LO macros (now Assembler mnemonics) + * Renamed enable bit for HMDMA from EN to HMDMAEN + * + * ---------------------------- + * revision 0.17 + * date: 2004/12/17 14:25:00; author: joeb + * comments: Replaced C++ Single-Line Comments w/C-standard Comments + * Changed EMAC EQ1024 TX/RX References to GE1024 + * + * ---------------------------- + * revision 0.18 + * date: 2005/01/05 10:50:00; author: joeb + * comments: Added CAN Macros To Index Mailbox Area and Acceptance Masks + * Added mask values for field deposit protection + * + * ---------------------------- + * revision 0.19 + * date: 2005/01/10 10:30:00; author: joeb + * comments: Made all Macro argument syntax compliant to MISRA-C 2004 rule 19.10. + * + * ---------------------------- + * revision 0.20 + * date: 2005/01/27 14:25:15; author: joeb + * comments: Moved MMRs common to BF534 to BF534 header. + */ +#ifndef _DEF_BF537_H +#define _DEF_BF537_H + +/* Include all Core registers and bit definitions */ +#include <asm/arch-common/def_LPBlackfin.h> + +/* Include all MMR and bit defines common to BF534 */ +#include <asm/arch-bf537/defBF534.h> + +/* + * Define EMAC Section Unique to BF536/BF537 + */ + +/* 10/100 Ethernet Controller (0xFFC03000 - 0xFFC031FF) */ +#define EMAC_OPMODE 0xFFC03000 /* Operating Mode Register */ +#define EMAC_ADDRLO 0xFFC03004 /* Address Low (32 LSBs) Register */ +#define EMAC_ADDRHI 0xFFC03008 /* Address High (16 MSBs) Register */ +#define EMAC_HASHLO 0xFFC0300C /* Multicast Hash Table Low (Bins 31-0) Register */ +#define EMAC_HASHHI 0xFFC03010 /* Multicast Hash Table High (Bins 63-32) Register */ +#define EMAC_STAADD 0xFFC03014 /* Station Management Address Register */ +#define EMAC_STADAT 0xFFC03018 /* Station Management Data Register */ +#define EMAC_FLC 0xFFC0301C /* Flow Control Register */ +#define EMAC_VLAN1 0xFFC03020 /* VLAN1 Tag Register */ +#define EMAC_VLAN2 0xFFC03024 /* VLAN2 Tag Register */ +#define EMAC_WKUP_CTL 0xFFC0302C /* Wake-Up Control/Status Register */ +#define EMAC_WKUP_FFMSK0 0xFFC03030 /* Wake-Up Frame Filter 0 Byte Mask Register */ +#define EMAC_WKUP_FFMSK1 0xFFC03034 /* Wake-Up Frame Filter 1 Byte Mask Register */ +#define EMAC_WKUP_FFMSK2 0xFFC03038 /* Wake-Up Frame Filter 2 Byte Mask Register */ +#define EMAC_WKUP_FFMSK3 0xFFC0303C /* Wake-Up Frame Filter 3 Byte Mask Register */ +#define EMAC_WKUP_FFCMD 0xFFC03040 /* Wake-Up Frame Filter Commands Register */ +#define EMAC_WKUP_FFOFF 0xFFC03044 /* Wake-Up Frame Filter Offsets Register */ +#define EMAC_WKUP_FFCRC0 0xFFC03048 /* Wake-Up Frame Filter 0,1 CRC-16 Register */ +#define EMAC_WKUP_FFCRC1 0xFFC0304C /* Wake-Up Frame Filter 2,3 CRC-16 Register */ + +#define EMAC_SYSCTL 0xFFC03060 /* EMAC System Control Register */ +#define EMAC_SYSTAT 0xFFC03064 /* EMAC System Status Register */ +#define EMAC_RX_STAT 0xFFC03068 /* RX Current Frame Status Register */ +#define EMAC_RX_STKY 0xFFC0306C /* RX Sticky Frame Status Register */ +#define EMAC_RX_IRQE 0xFFC03070 /* RX Frame Status Interrupt Enables Register */ +#define EMAC_TX_STAT 0xFFC03074 /* TX Current Frame Status Register */ +#define EMAC_TX_STKY 0xFFC03078 /* TX Sticky Frame Status Register */ +#define EMAC_TX_IRQE 0xFFC0307C /* TX Frame Status Interrupt Enables Register */ + +#define EMAC_MMC_CTL 0xFFC03080 /* MMC Counter Control Register */ +#define EMAC_MMC_RIRQS 0xFFC03084 /* MMC RX Interrupt Status Register */ +#define EMAC_MMC_RIRQE 0xFFC03088 /* MMC RX Interrupt Enables Register */ +#define EMAC_MMC_TIRQS 0xFFC0308C /* MMC TX Interrupt Status Register */ +#define EMAC_MMC_TIRQE 0xFFC03090 /* MMC TX Interrupt Enables Register */ + +#define EMAC_RXC_OK 0xFFC03100 /* RX Frame Successful Count */ +#define EMAC_RXC_FCS 0xFFC03104 /* RX Frame FCS Failure Count */ +#define EMAC_RXC_ALIGN 0xFFC03108 /* RX Alignment Error Count */ +#define EMAC_RXC_OCTET 0xFFC0310C /* RX Octets Successfully Received Count */ +#define EMAC_RXC_DMAOVF 0xFFC03110 /* Internal MAC Sublayer Error RX Frame Count */ +#define EMAC_RXC_UNICST 0xFFC03114 /* Unicast RX Frame Count */ +#define EMAC_RXC_MULTI 0xFFC03118 /* Multicast RX Frame Count */ +#define EMAC_RXC_BROAD 0xFFC0311C /* Broadcast RX Frame Count */ +#define EMAC_RXC_LNERRI 0xFFC03120 /* RX Frame In Range Error Count */ +#define EMAC_RXC_LNERRO 0xFFC03124 /* RX Frame Out Of Range Error Count */ +#define EMAC_RXC_LONG 0xFFC03128 /* RX Frame Too Long Count */ +#define EMAC_RXC_MACCTL 0xFFC0312C /* MAC Control RX Frame Count */ +#define EMAC_RXC_OPCODE 0xFFC03130 /* Unsupported Op-Code RX Frame Count */ +#define EMAC_RXC_PAUSE 0xFFC03134 /* MAC Control Pause RX Frame Count */ +#define EMAC_RXC_ALLFRM 0xFFC03138 /* Overall RX Frame Count */ +#define EMAC_RXC_ALLOCT 0xFFC0313C /* Overall RX Octet Count */ +#define EMAC_RXC_TYPED 0xFFC03140 /* Type/Length Consistent RX Frame Count */ +#define EMAC_RXC_SHORT 0xFFC03144 /* RX Frame Fragment Count - Byte Count x < 64 */ +#define EMAC_RXC_EQ64 0xFFC03148 /* Good RX Frame Count - Byte Count x = 64 */ +#define EMAC_RXC_LT128 0xFFC0314C /* Good RX Frame Count - Byte Count 64 <= x < 128 */ +#define EMAC_RXC_LT256 0xFFC03150 /* Good RX Frame Count - Byte Count 128 <= x < 256 */ +#define EMAC_RXC_LT512 0xFFC03154 /* Good RX Frame Count - Byte Count 256 <= x < 512 */ +#define EMAC_RXC_LT1024 0xFFC03158 /* Good RX Frame Count - Byte Count 512 <= x < 1024 */ +#define EMAC_RXC_GE1024 0xFFC0315C /* Good RX Frame Count - Byte Count x >= 1024 */ + +#define EMAC_TXC_OK 0xFFC03180 /* TX Frame Successful Count */ +#define EMAC_TXC_1COL 0xFFC03184 /* TX Frames Successful After Single Collision Count */ +#define EMAC_TXC_GT1COL 0xFFC03188 /* TX Frames Successful After Multiple Collisions Count */ +#define EMAC_TXC_OCTET 0xFFC0318C /* TX Octets Successfully Received Count */ +#define EMAC_TXC_DEFER 0xFFC03190 /* TX Frame Delayed Due To Busy Count */ +#define EMAC_TXC_LATECL 0xFFC03194 /* Late TX Collisions Count */ +#define EMAC_TXC_XS_COL 0xFFC03198 /* TX Frame Failed Due To Excessive Collisions Count */ +#define EMAC_TXC_DMAUND 0xFFC0319C /* Internal MAC Sublayer Error TX Frame Count */ +#define EMAC_TXC_CRSERR 0xFFC031A0 /* Carrier Sense Deasserted During TX Frame Count */ +#define EMAC_TXC_UNICST 0xFFC031A4 /* Unicast TX Frame Count */ +#define EMAC_TXC_MULTI 0xFFC031A8 /* Multicast TX Frame Count */ +#define EMAC_TXC_BROAD 0xFFC031AC /* Broadcast TX Frame Count */ +#define EMAC_TXC_XS_DFR 0xFFC031B0 /* TX Frames With Excessive Deferral Count */ +#define EMAC_TXC_MACCTL 0xFFC031B4 /* MAC Control TX Frame Count */ +#define EMAC_TXC_ALLFRM 0xFFC031B8 /* Overall TX Frame Count */ +#define EMAC_TXC_ALLOCT 0xFFC031BC /* Overall TX Octet Count */ +#define EMAC_TXC_EQ64 0xFFC031C0 /* Good TX Frame Count - Byte Count x = 64 */ +#define EMAC_TXC_LT128 0xFFC031C4 /* Good TX Frame Count - Byte Count 64 <= x < 128 */ +#define EMAC_TXC_LT256 0xFFC031C8 /* Good TX Frame Count - Byte Count 128 <= x < 256 */ +#define EMAC_TXC_LT512 0xFFC031CC /* Good TX Frame Count - Byte Count 256 <= x < 512 */ +#define EMAC_TXC_LT1024 0xFFC031D0 /* Good TX Frame Count - Byte Count 512 <= x < 1024 */ +#define EMAC_TXC_GE1024 0xFFC031D4 /* Good TX Frame Count - Byte Count x >= 1024 */ +#define EMAC_TXC_ABORT 0xFFC031D8 /* Total TX Frames Aborted Count */ + +/* Listing for IEEE-Supported Count Registers */ +#define FramesReceivedOK EMAC_RXC_OK /* RX Frame Successful Count */ +#define FrameCheckSequenceErrors EMAC_RXC_FCS /* RX Frame FCS Failure Count */ +#define AlignmentErrors EMAC_RXC_ALIGN /* RX Alignment Error Count */ +#define OctetsReceivedOK EMAC_RXC_OCTET /* RX Octets Successfully Received Count */ +#define FramesLostDueToIntMACRcvError EMAC_RXC_DMAOVF /* Internal MAC Sublayer Error RX Frame Count */ +#define UnicastFramesReceivedOK EMAC_RXC_UNICST /* Unicast RX Frame Count */ +#define MulticastFramesReceivedOK EMAC_RXC_MULTI /* Multicast RX Frame Count */ +#define BroadcastFramesReceivedOK EMAC_RXC_BROAD /* Broadcast RX Frame Count */ +#define InRangeLengthErrors EMAC_RXC_LNERRI /* RX Frame In Range Error Count */ +#define OutOfRangeLengthField EMAC_RXC_LNERRO /* RX Frame Out Of Range Error Count */ +#define FrameTooLongErrors EMAC_RXC_LONG /* RX Frame Too Long Count */ +#define MACControlFramesReceived EMAC_RXC_MACCTL /* MAC Control RX Frame Count */ +#define UnsupportedOpcodesReceived EMAC_RXC_OPCODE /* Unsupported Op-Code RX Frame Count */ +#define PAUSEMACCtrlFramesReceived EMAC_RXC_PAUSE /* MAC Control Pause RX Frame Count */ +#define FramesReceivedAll EMAC_RXC_ALLFRM /* Overall RX Frame Count */ +#define OctetsReceivedAll EMAC_RXC_ALLOCT /* Overall RX Octet Count */ +#define TypedFramesReceived EMAC_RXC_TYPED /* Type/Length Consistent RX Frame Count */ +#define FramesLenLt64Received EMAC_RXC_SHORT /* RX Frame Fragment Count - Byte Count x < 64 */ +#define FramesLenEq64Received EMAC_RXC_EQ64 /* Good RX Frame Count - Byte Count x = 64 */ +#define FramesLen65_127Received EMAC_RXC_LT128 /* Good RX Frame Count - Byte Count 64 <= x < 128 */ +#define FramesLen128_255Received EMAC_RXC_LT256 /* Good RX Frame Count - Byte Count 128 <= x < 256 */ +#define FramesLen256_511Received EMAC_RXC_LT512 /* Good RX Frame Count - Byte Count 256 <= x < 512 */ +#define FramesLen512_1023Received EMAC_RXC_LT1024 /* Good RX Frame Count - Byte Count 512 <= x < 1024 */ +#define FramesLen1024_MaxReceived EMAC_RXC_GE1024 /* Good RX Frame Count - Byte Count x >= 1024 */ + +#define FramesTransmittedOK EMAC_TXC_OK /* TX Frame Successful Count */ +#define SingleCollisionFrames EMAC_TXC_1COL /* TX Frames Successful After Single Collision Count */ +#define MultipleCollisionFrames EMAC_TXC_GT1COL /* TX Frames Successful After Multiple Collisions Count */ +#define OctetsTransmittedOK EMAC_TXC_OCTET /* TX Octets Successfully Received Count */ +#define FramesWithDeferredXmissions EMAC_TXC_DEFER /* TX Frame Delayed Due To Busy Count */ +#define LateCollisions EMAC_TXC_LATECL /* Late TX Collisions Count */ +#define FramesAbortedDueToXSColls EMAC_TXC_XS_COL /* TX Frame Failed Due To Excessive Collisions Count */ +#define FramesLostDueToIntMacXmitError EMAC_TXC_DMAUND /* Internal MAC Sublayer Error TX Frame Count */ +#define CarrierSenseErrors EMAC_TXC_CRSERR /* Carrier Sense Deasserted During TX Frame Count */ +#define UnicastFramesXmittedOK EMAC_TXC_UNICST /* Unicast TX Frame Count */ +#define MulticastFramesXmittedOK EMAC_TXC_MULTI /* Multicast TX Frame Count */ +#define BroadcastFramesXmittedOK EMAC_TXC_BROAD /* Broadcast TX Frame Count */ +#define FramesWithExcessiveDeferral EMAC_TXC_XS_DFR /* TX Frames With Excessive Deferral Count */ +#define MACControlFramesTransmitted EMAC_TXC_MACCTL /* MAC Control TX Frame Count */ +#define FramesTransmittedAll EMAC_TXC_ALLFRM /* Overall TX Frame Count */ +#define OctetsTransmittedAll EMAC_TXC_ALLOCT /* Overall TX Octet Count */ +#define FramesLenEq64Transmitted EMAC_TXC_EQ64 /* Good TX Frame Count - Byte Count x = 64 */ +#define FramesLen65_127Transmitted EMAC_TXC_LT128 /* Good TX Frame Count - Byte Count 64 <= x < 128 */ +#define FramesLen128_255Transmitted EMAC_TXC_LT256 /* Good TX Frame Count - Byte Count 128 <= x < 256 */ +#define FramesLen256_511Transmitted EMAC_TXC_LT512 /* Good TX Frame Count - Byte Count 256 <= x < 512 */ +#define FramesLen512_1023Transmitted EMAC_TXC_LT1024 /* Good TX Frame Count - Byte Count 512 <= x < 1024 */ +#define FramesLen1024_MaxTransmitted EMAC_TXC_GE1024 /* Good TX Frame Count - Byte Count x >= 1024 */ +#define TxAbortedFrames EMAC_TXC_ABORT /* Total TX Frames Aborted Count */ + +/* + * System MMR Register Bits And Macros + * + * Disclaimer: All macros are intended to make C and Assembly code more readable. + * Use these macros carefully, as any that do left shifts for field + * depositing will result in the lower order bits being destroyed. Any + * macro that shifts left to properly position the bit-field should be + * used as part of an OR to initialize a register and NOT as a dynamic + * modifier UNLESS the lower order bits are saved and ORed back in when + * the macro is used. + */ +/* + * ETHERNET 10/100 CONTROLLER MASKS + */ +/* EMAC_OPMODE Masks */ +#define RE 0x00000001 /* Receiver Enable */ +#define ASTP 0x00000002 /* Enable Automatic Pad Stripping On RX Frames */ +#define HU 0x00000010 /* Hash Filter Unicast Address */ +#define HM 0x00000020 /* Hash Filter Multicast Address */ +#define PAM 0x00000040 /* Pass-All-Multicast Mode Enable */ +#define PR 0x00000080 /* Promiscuous Mode Enable */ +#define IFE 0x00000100 /* Inverse Filtering Enable */ +#define DBF 0x00000200 /* Disable Broadcast Frame Reception */ +#define PBF 0x00000400 /* Pass Bad Frames Enable */ +#define PSF 0x00000800 /* Pass Short Frames Enable */ +#define RAF 0x00001000 /* Receive-All Mode */ +#define TE 0x00010000 /* Transmitter Enable */ +#define DTXPAD 0x00020000 /* Disable Automatic TX Padding */ +#define DTXCRC 0x00040000 /* Disable Automatic TX CRC Generation */ +#define DC 0x00080000 /* Deferral Check */ +#define BOLMT 0x00300000 /* Back-Off Limit */ +#define BOLMT_10 0x00000000 /* 10-bit range */ +#define BOLMT_8 0x00100000 /* 8-bit range */ +#define BOLMT_4 0x00200000 /* 4-bit range */ +#define BOLMT_1 0x00300000 /* 1-bit range */ +#define DRTY 0x00400000 /* Disable TX Retry On Collision */ +#define LCTRE 0x00800000 /* Enable TX Retry On Late Collision */ +#define RMII 0x01000000 /* RMII/MII* Mode */ +#define RMII_10 0x02000000 /* Speed Select for RMII Port (10MBit/100MBit*) */ +#define FDMODE 0x04000000 /* Duplex Mode Enable (Full/Half*) */ +#define LB 0x08000000 /* Internal Loopback Enable */ +#define DRO 0x10000000 /* Disable Receive Own Frames (Half-Duplex Mode) */ + +/* EMAC_STAADD Masks */ +#define STABUSY 0x00000001 /* Initiate Station Mgt Reg Access / STA Busy Stat */ +#define STAOP 0x00000002 /* Station Management Operation Code (Write/Read*) */ +#define STADISPRE 0x00000004 /* Disable Preamble Generation */ +#define STAIE 0x00000008 /* Station Mgt. Transfer Done Interrupt Enable */ +#define REGAD 0x000007C0 /* STA Register Address */ +#define PHYAD 0x0000F800 /* PHY Device Address */ + +#define SET_REGAD(x) (((x)&0x1F)<< 6 ) /* Set STA Register Address */ +#define SET_PHYAD(x) (((x)&0x1F)<< 11 ) /* Set PHY Device Address */ + +/* EMAC_STADAT Mask */ +#define STADATA 0x0000FFFF /* Station Management Data */ + +/* EMAC_FLC Masks */ +#define FLCBUSY 0x00000001 /* Send Flow Ctrl Frame / Flow Ctrl Busy Status */ +#define FLCE 0x00000002 /* Flow Control Enable */ +#define PCF 0x00000004 /* Pass Control Frames */ +#define BKPRSEN 0x00000008 /* Enable Backpressure */ +#define FLCPAUSE 0xFFFF0000 /* Pause Time */ + +#define SET_FLCPAUSE(x) (((x)&0xFFFF)<< 16) /* Set Pause Time */ + +/* EMAC_WKUP_CTL Masks */ +#define CAPWKFRM 0x00000001 /* Capture Wake-Up Frames */ +#define MPKE 0x00000002 /* Magic Packet Enable */ +#define RWKE 0x00000004 /* Remote Wake-Up Frame Enable */ +#define GUWKE 0x00000008 /* Global Unicast Wake Enable */ +#define MPKS 0x00000020 /* Magic Packet Received Status */ +#define RWKS 0x00000F00 /* Wake-Up Frame Received Status, Filters 3:0 */ + +/* EMAC_WKUP_FFCMD Masks */ +#define WF0_E 0x00000001 /* Enable Wake-Up Filter 0 */ +#define WF0_T 0x00000008 /* Wake-Up Filter 0 Addr Type (Multicast/Unicast*) */ +#define WF1_E 0x00000100 /* Enable Wake-Up Filter 1 */ +#define WF1_T 0x00000800 /* Wake-Up Filter 1 Addr Type (Multicast/Unicast*) */ +#define WF2_E 0x00010000 /* Enable Wake-Up Filter 2 */ +#define WF2_T 0x00080000 /* Wake-Up Filter 2 Addr Type (Multicast/Unicast*) */ +#define WF3_E 0x01000000 /* Enable Wake-Up Filter 3 */ +#define WF3_T 0x08000000 /* Wake-Up Filter 3 Addr Type (Multicast/Unicast*) */ + +/* EMAC_WKUP_FFOFF Masks */ +#define WF0_OFF 0x000000FF /* Wake-Up Filter 0 Pattern Offset */ +#define WF1_OFF 0x0000FF00 /* Wake-Up Filter 1 Pattern Offset */ +#define WF2_OFF 0x00FF0000 /* Wake-Up Filter 2 Pattern Offset */ +#define WF3_OFF 0xFF000000 /* Wake-Up Filter 3 Pattern Offset */ + +#define SET_WF0_OFF(x) (((x)&0xFF)<< 0 ) /* Set Wake-Up Filter 0 Byte Offset */ +#define SET_WF1_OFF(x) (((x)&0xFF)<< 8 ) /* Set Wake-Up Filter 1 Byte Offset */ +#define SET_WF2_OFF(x) (((x)&0xFF)<< 16 ) /* Set Wake-Up Filter 2 Byte Offset */ +#define SET_WF3_OFF(x) (((x)&0xFF)<< 24 ) /* Set Wake-Up Filter 3 Byte Offset */ +/* Set ALL Offsets */ +#define SET_WF_OFFS(x0,x1,x2,x3) (SET_WF0_OFF((x0))|SET_WF1_OFF((x1))|SET_WF2_OFF((x2))|SET_WF3_OFF((x3))) + +/* EMAC_WKUP_FFCRC0 Masks */ +#define WF0_CRC 0x0000FFFF /* Wake-Up Filter 0 Pattern CRC */ +#define WF1_CRC 0xFFFF0000 /* Wake-Up Filter 1 Pattern CRC */ + +#define SET_WF0_CRC(x) (((x)&0xFFFF)<< 0) /* Set Wake-Up Filter 0 Target CRC */ +#define SET_WF1_CRC(x) (((x)&0xFFFF)<< 16) /* Set Wake-Up Filter 1 Target CRC */ + +/* EMAC_WKUP_FFCRC1 Masks */ +#define WF2_CRC 0x0000FFFF /* Wake-Up Filter 2 Pattern CRC */ +#define WF3_CRC 0xFFFF0000 /* Wake-Up Filter 3 Pattern CRC */ + +#define SET_WF2_CRC(x) (((x)&0xFFFF)<< 0) /* Set Wake-Up Filter 2 Target CRC */ +#define SET_WF3_CRC(x) (((x)&0xFFFF)<< 16) /* Set Wake-Up Filter 3 Target CRC */ + +/* EMAC_SYSCTL Masks */ +#define PHYIE 0x00000001 /* PHY_INT Interrupt Enable */ +#define RXDWA 0x00000002 /* Receive Frame DMA Word Alignment (Odd/Even*) */ +#define RXCKS 0x00000004 /* Enable RX Frame TCP/UDP Checksum Computation */ +#define MDCDIV 0x00003F00 /* SCLK:MDC Clock Divisor [MDC=SCLK/(2*(N+1))] */ + +#define SET_MDCDIV(x) (((x)&0x3F)<< 8) /* Set MDC Clock Divisor */ + +/* EMAC_SYSTAT Masks */ +#define PHYINT 0x00000001 /* PHY_INT Interrupt Status */ +#define MMCINT 0x00000002 /* MMC Counter Interrupt Status */ +#define RXFSINT 0x00000004 /* RX Frame-Status Interrupt Status */ +#define TXFSINT 0x00000008 /* TX Frame-Status Interrupt Status */ +#define WAKEDET 0x00000010 /* Wake-Up Detected Status */ +#define RXDMAERR 0x00000020 /* RX DMA Direction Error Status */ +#define TXDMAERR 0x00000040 /* TX DMA Direction Error Status */ +#define STMDONE 0x00000080 /* Station Mgt. Transfer Done Interrupt Status */ + +/* EMAC_RX_STAT, EMAC_RX_STKY, and EMAC_RX_IRQE Masks */ +#define RX_FRLEN 0x000007FF /* Frame Length In Bytes */ +#define RX_COMP 0x00001000 /* RX Frame Complete */ +#define RX_OK 0x00002000 /* RX Frame Received With No Errors */ +#define RX_LONG 0x00004000 /* RX Frame Too Long Error */ +#define RX_ALIGN 0x00008000 /* RX Frame Alignment Error */ +#define RX_CRC 0x00010000 /* RX Frame CRC Error */ +#define RX_LEN 0x00020000 /* RX Frame Length Error */ +#define RX_FRAG 0x00040000 /* RX Frame Fragment Error */ +#define RX_ADDR 0x00080000 /* RX Frame Address Filter Failed Error */ +#define RX_DMAO 0x00100000 /* RX Frame DMA Overrun Error */ +#define RX_PHY 0x00200000 /* RX Frame PHY Error */ +#define RX_LATE 0x00400000 /* RX Frame Late Collision Error */ +#define RX_RANGE 0x00800000 /* RX Frame Length Field Out of Range Error */ +#define RX_MULTI 0x01000000 /* RX Multicast Frame Indicator */ +#define RX_BROAD 0x02000000 /* RX Broadcast Frame Indicator */ +#define RX_CTL 0x04000000 /* RX Control Frame Indicator */ +#define RX_UCTL 0x08000000 /* Unsupported RX Control Frame Indicator */ +#define RX_TYPE 0x10000000 /* RX Typed Frame Indicator */ +#define RX_VLAN1 0x20000000 /* RX VLAN1 Frame Indicator */ +#define RX_VLAN2 0x40000000 /* RX VLAN2 Frame Indicator */ +#define RX_ACCEPT 0x80000000 /* RX Frame Accepted Indicator */ + +/* EMAC_TX_STAT, EMAC_TX_STKY, and EMAC_TX_IRQE Masks */ +#define TX_COMP 0x00000001 /* TX Frame Complete */ +#define TX_OK 0x00000002 /* TX Frame Sent With No Errors */ +#define TX_ECOLL 0x00000004 /* TX Frame Excessive Collision Error */ +#define TX_LATE 0x00000008 /* TX Frame Late Collision Error */ +#define TX_DMAU 0x00000010 /* TX Frame DMA Underrun Error (STAT) */ +#define TX_MACE 0x00000010 /* Internal MAC Error Detected (STKY and IRQE) */ +#define TX_EDEFER 0x00000020 /* TX Frame Excessive Deferral Error */ +#define TX_BROAD 0x00000040 /* TX Broadcast Frame Indicator */ +#define TX_MULTI 0x00000080 /* TX Multicast Frame Indicator */ +#define TX_CCNT 0x00000F00 /* TX Frame Collision Count */ +#define TX_DEFER 0x00001000 /* TX Frame Deferred Indicator */ +#define TX_CRS 0x00002000 /* TX Frame Carrier Sense Not Asserted Error */ +#define TX_LOSS 0x00004000 /* TX Frame Carrier Lost During TX Error */ +#define TX_RETRY 0x00008000 /* TX Frame Successful After Retry */ +#define TX_FRLEN 0x07FF0000 /* TX Frame Length (Bytes) */ + +/* EMAC_MMC_CTL Masks */ +#define RSTC 0x00000001 /* Reset All Counters */ +#define CROLL 0x00000002 /* Counter Roll-Over Enable */ +#define CCOR 0x00000004 /* Counter Clear-On-Read Mode Enable */ +#define MMCE 0x00000008 /* Enable MMC Counter Operation */ + +/* EMAC_MMC_RIRQS and EMAC_MMC_RIRQE Masks */ +#define RX_OK_CNT 0x00000001 /* RX Frames Received With No Errors */ +#define RX_FCS_CNT 0x00000002 /* RX Frames W/Frame Check Sequence Errors */ +#define RX_ALIGN_CNT 0x00000004 /* RX Frames With Alignment Errors */ +#define RX_OCTET_CNT 0x00000008 /* RX Octets Received OK */ +#define RX_LOST_CNT 0x00000010 /* RX Frames Lost Due To Internal MAC RX Error */ +#define RX_UNI_CNT 0x00000020 /* Unicast RX Frames Received OK */ +#define RX_MULTI_CNT 0x00000040 /* Multicast RX Frames Received OK */ +#define RX_BROAD_CNT 0x00000080 /* Broadcast RX Frames Received OK */ +#define RX_IRL_CNT 0x00000100 /* RX Frames With In-Range Length Errors */ +#define RX_ORL_CNT 0x00000200 /* RX Frames With Out-Of-Range Length Errors */ +#define RX_LONG_CNT 0x00000400 /* RX Frames With Frame Too Long Errors */ +#define RX_MACCTL_CNT 0x00000800 /* MAC Control RX Frames Received */ +#define RX_OPCODE_CTL 0x00001000 /* Unsupported Op-Code RX Frames Received */ +#define RX_PAUSE_CNT 0x00002000 /* PAUSEMAC Control RX Frames Received */ +#define RX_ALLF_CNT 0x00004000 /* All RX Frames Received */ +#define RX_ALLO_CNT 0x00008000 /* All RX Octets Received */ +#define RX_TYPED_CNT 0x00010000 /* Typed RX Frames Received */ +#define RX_SHORT_CNT 0x00020000 /* RX Frame Fragments (< 64 Bytes) Received */ +#define RX_EQ64_CNT 0x00040000 /* 64-Byte RX Frames Received */ +#define RX_LT128_CNT 0x00080000 /* 65-127-Byte RX Frames Received */ +#define RX_LT256_CNT 0x00100000 /* 128-255-Byte RX Frames Received */ +#define RX_LT512_CNT 0x00200000 /* 256-511-Byte RX Frames Received */ +#define RX_LT1024_CNT 0x00400000 /* 512-1023-Byte RX Frames Received */ +#define RX_GE1024_CNT 0x00800000 /* 1024-Max-Byte RX Frames Received */ + +/* EMAC_MMC_TIRQS and EMAC_MMC_TIRQE Masks */ +#define TX_OK_CNT 0x00000001 /* TX Frames Sent OK */ +#define TX_SCOLL_CNT 0x00000002 /* TX Frames With Single Collisions */ +#define TX_MCOLL_CNT 0x00000004 /* TX Frames With Multiple Collisions */ +#define TX_OCTET_CNT 0x00000008 /* TX Octets Sent OK */ +#define TX_DEFER_CNT 0x00000010 /* TX Frames With Deferred Transmission */ +#define TX_LATE_CNT 0x00000020 /* TX Frames With Late Collisions */ +#define TX_ABORTC_CNT 0x00000040 /* TX Frames Aborted Due To Excess Collisions */ +#define TX_LOST_CNT 0x00000080 /* TX Frames Lost Due To Internal MAC TX Error */ +#define TX_CRS_CNT 0x00000100 /* TX Frames With Carrier Sense Errors */ +#define TX_UNI_CNT 0x00000200 /* Unicast TX Frames Sent */ +#define TX_MULTI_CNT 0x00000400 /* Multicast TX Frames Sent */ +#define TX_BROAD_CNT 0x00000800 /* Broadcast TX Frames Sent */ +#define TX_EXDEF_CTL 0x00001000 /* TX Frames With Excessive Deferral */ +#define TX_MACCTL_CNT 0x00002000 /* MAC Control TX Frames Sent */ +#define TX_ALLF_CNT 0x00004000 /* All TX Frames Sent */ +#define TX_ALLO_CNT 0x00008000 /* All TX Octets Sent */ +#define TX_EQ64_CNT 0x00010000 /* 64-Byte TX Frames Sent */ +#define TX_LT128_CNT 0x00020000 /* 65-127-Byte TX Frames Sent */ +#define TX_LT256_CNT 0x00040000 /* 128-255-Byte TX Frames Sent */ +#define TX_LT512_CNT 0x00080000 /* 256-511-Byte TX Frames Sent */ +#define TX_LT1024_CNT 0x00100000 /* 512-1023-Byte TX Frames Sent */ +#define TX_GE1024_CNT 0x00200000 /* 1024-Max-Byte TX Frames Sent */ +#define TX_ABORT_CNT 0x00400000 /* TX Frames Aborted */ + +#endif /* _DEF_BF537_H */ diff --git a/include/asm-blackfin/arch-bf537/defBF537_extn.h b/include/asm-blackfin/arch-bf537/defBF537_extn.h new file mode 100644 index 0000000..8090da6 --- /dev/null +++ b/include/asm-blackfin/arch-bf537/defBF537_extn.h @@ -0,0 +1,76 @@ +/* + * defBF537_extn.h + * + * This file is subject to the terms and conditions of the GNU Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Non-GPL License also available as part of VisualDSP++ + * + * http://www.analog.com/processors/resources/crosscore/visualDspDevSoftware.html + * + * (c) Copyright 2001-2005 Analog Devices, Inc. All rights reserved + * + * This file under source code control, please send bugs or changes to: + * dsptools.support@analog.com + * + */ + +#ifndef _DEF_BF537_EXTN_H +#define _DEF_BF537_EXTN_H + +#define OFFSET_( x ) ((x) & 0x0000FFFF) /* define macro for offset */ +/* Delay inserted for PLL transition */ +#define PLL_DELAY 0x1000 + +#define L1_ISRAM 0xFFA00000 +#define L1_ISRAM_END 0xFFA10000 +#define DATA_BANKA_SRAM 0xFF800000 +#define DATA_BANKA_SRAM_END 0xFF808000 +#define DATA_BANKB_SRAM 0xFF900000 +#define DATA_BANKB_SRAM_END 0xFF908000 +#define SYSMMR_BASE 0xFFC00000 +#define WDSIZE16 0x00000004 + +/* Event Vector Table Address */ +#define EVT_EMULATION_ADDR 0xffe02000 +#define EVT_RESET_ADDR 0xffe02004 +#define EVT_NMI_ADDR 0xffe02008 +#define EVT_EXCEPTION_ADDR 0xffe0200c +#define EVT_GLOBAL_INT_ENB_ADDR 0xffe02010 +#define EVT_HARDWARE_ERROR_ADDR 0xffe02014 +#define EVT_TIMER_ADDR 0xffe02018 +#define EVT_IVG7_ADDR 0xffe0201c +#define EVT_IVG8_ADDR 0xffe02020 +#define EVT_IVG9_ADDR 0xffe02024 +#define EVT_IVG10_ADDR 0xffe02028 +#define EVT_IVG11_ADDR 0xffe0202c +#define EVT_IVG12_ADDR 0xffe02030 +#define EVT_IVG13_ADDR 0xffe02034 +#define EVT_IVG14_ADDR 0xffe02038 +#define EVT_IVG15_ADDR 0xffe0203c +#define EVT_OVERRIDE_ADDR 0xffe02100 + +/* IMASK Bit values */ +#define IVG15_POS 0x00008000 +#define IVG14_POS 0x00004000 +#define IVG13_POS 0x00002000 +#define IVG12_POS 0x00001000 +#define IVG11_POS 0x00000800 +#define IVG10_POS 0x00000400 +#define IVG9_POS 0x00000200 +#define IVG8_POS 0x00000100 +#define IVG7_POS 0x00000080 +#define IVGTMR_POS 0x00000040 +#define IVGHW_POS 0x00000020 + +#define WDOG_TMR_DISABLE (0xAD << 4) +#define ICTL_RST 0x00000000 +#define ICTL_NMI 0x00000002 +#define ICTL_GP 0x00000004 +#define ICTL_DISABLE 0x00000003 + +/* Watch Dog timer values setup */ +#define WATCHDOG_DISABLE WDOG_TMR_DISABLE | ICTL_DISABLE + +#endif /* _DEF_BF537_EXTN_H */ diff --git a/include/asm-blackfin/arch-bf537/irq.h b/include/asm-blackfin/arch-bf537/irq.h new file mode 100644 index 0000000..4cb4c15 --- /dev/null +++ b/include/asm-blackfin/arch-bf537/irq.h @@ -0,0 +1,94 @@ +/* + * U-boot bf537_irq.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * This file is based on + * linux/arch/$(ARCH)/platform/$(PLATFORM)/irq.c + * Changed by HuTao Apr18, 2003 + * + * Copyright was missing when I got the code so took from MIPS arch ...MaTed--- + * Copyright (C) 1994 by Waldorf GMBH, written by Ralf Baechle + * Copyright (C) 1995, 96, 97, 98, 99, 2000, 2001 by Ralf Baechle + * + * Adapted for BlackFin (ADI) by Ted Ma <mated@sympatico.ca> + * Copyright (c) 2002 Arcturus Networks Inc. (www.arcturusnetworks.com) + * Copyright (c) 2002 Lineo, Inc. <mattw@lineo.com> + * + * Adapted for BlackFin BF537 by Bas Vermeulen <bas@buyways.nl> + * Copyright (c) 2003 BuyWays B.V. (www.buyways.nl) + + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _BF537_IRQ_H_ +#define _BF537_IRQ_H_ + +/* + * Interrupt source definitions + * Event Source Core Event Name Number + * EMU 0 + * Reset RST 1 + * NMI NMI 2 + * Exception EVX 3 + * Reserved -- 4 + * Hardware Error IVHW 5 + * Core Timer IVTMR 6 + * PLL Wakeup Interrupt IVG7 7 + * DMA Error (generic) IVG7 8 + * PPI Error Interrupt IVG7 9 + * SPORT0 Error Interrupt IVG7 10 + * SPORT1 Error Interrupt IVG7 11 + * SPI Error Interrupt IVG7 12 + * UART Error Interrupt IVG7 13 + * RTC Interrupt IVG8 14 + * DMA0 Interrupt (PPI) IVG8 15 + * DMA1 (SPORT0 RX) IVG9 16 + * DMA2 (SPORT0 TX) IVG9 17 + * DMA3 (SPORT1 RX) IVG9 18 + * DMA4 (SPORT1 TX) IVG9 19 + * DMA5 (PPI) IVG10 20 + * DMA6 (UART RX) IVG10 21 + * DMA7 (UART TX) IVG10 22 + * Timer0 IVG11 23 + * Timer1 IVG11 24 + * Timer2 IVG11 25 + * PF Interrupt A IVG12 26 + * PF Interrupt B IVG12 27 + * DMA8/9 Interrupt IVG13 28 + * DMA10/11 Interrupt IVG13 29 + * Watchdog Timer IVG13 30 + * Software Interrupt 1 IVG14 31 + * Software Interrupt 2 -- + * (lowest priority) IVG15 32 + */ + +#define IRQ_EMU 0 /* Emulation */ +#define IRQ_RST 1 /* reset */ +#define IRQ_NMI 2 /* Non Maskable */ +#define IRQ_EVX 3 /* Exception */ +#define IRQ_UNUSED 4 /* - unused interrupt */ +#define IRQ_HWERR 5 /* Hardware Error */ +#define IRQ_CORETMR 6 /* Core timer */ + +#define IRQ_UART_RX_BIT 0x0800 +#define IRQ_UART_TX_BIT 0x1000 +#define IRQ_UART_ERROR_BIT 0x40 + +#endif diff --git a/include/asm-blackfin/arch-bf561/anomaly.h b/include/asm-blackfin/arch-bf561/anomaly.h new file mode 100644 index 0000000..467649b --- /dev/null +++ b/include/asm-blackfin/arch-bf561/anomaly.h @@ -0,0 +1,181 @@ +/* + * File: include/asm-blackfin/arch-bf561/anomaly.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + * This file shoule be up to date with: + * - Revision L, 10Aug2006; ADSP-BF561 Silicon Anomaly List + */ + +#ifndef _MACH_ANOMALY_H_ +#define _MACH_ANOMALY_H_ + +/* We do not support 0.1 or 0.4 silicon - sorry */ +#if (defined(CONFIG_BF_REV_0_1) || defined(CONFIG_BF_REV_0_2) || defined(CONFIG_BF_REV_0_4)) +#error Kernel will not work on BF561 Version 0.1, 0.2, or 0.4 +#endif + +/* Issues that are common to 0.5 and 0.3 silicon */ +#if (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_3)) +#define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in + slot1 and store of a P register in slot 2 is not + supported */ +#define ANOMALY_05000099 /* UART Line Status Register (UART_LSR) bits are not + updated at the same time. */ +#define ANOMALY_05000120 /* Testset instructions restricted to 32-bit aligned + memory locations */ +#define ANOMALY_05000122 /* Rx.H cannot be used to access 16-bit System MMR + registers */ +#define ANOMALY_05000127 /* Signbits instruction not functional under certain + conditions */ +#define ANOMALY_05000149 /* IMDMA S1/D1 channel may stall */ +#define ANOMALY_05000166 /* PPI Data Lengths Between 8 and 16 do not zero out + upper bits */ +#define ANOMALY_05000167 /* Turning Serial Ports on With External Frame Syncs */ +#define ANOMALY_05000180 /* PPI_DELAY not functional in PPI modes with 0 frame + syncs */ +#define ANOMALY_05000182 /* IMDMA does not operate to full speed for 600MHz + and higher devices */ +#define ANOMALY_05000187 /* IMDMA Corrupted Data after a Halt */ +#define ANOMALY_05000190 /* PPI not functional at core voltage < 1Volt */ +#define ANOMALY_05000208 /* VSTAT status bit in PLL_STAT register is not + functional */ +#define ANOMALY_05000245 /* Spurious Hardware Error from an access in the + shadow of a conditional branch */ +#define ANOMALY_05000257 /* Interrupt/Exception during short hardware loop + may cause bad instruction fetches */ +#define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on + external SPORT TX and RX clocks */ +#define ANOMALY_05000267 /* IMDMA may corrupt data under certain conditions */ +#define ANOMALY_05000269 /* High I/O activity causes output voltage of internal + voltage regulator (VDDint) to increase */ +#define ANOMALY_05000270 /* High I/O activity causes output voltage of internal + voltage regulator (VDDint) to decrease */ +#define ANOMALY_05000272 /* Certain data cache write through modes fail for + VDDint <=0.9V */ +#define ANOMALY_05000274 /* Data cache write back to external synchronous memory + may be lost */ +#define ANOMALY_05000275 /* PPI Timing and sampling informaton updates */ +#endif /* (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_3)) */ + +#if (defined(CONFIG_BF_REV_0_5)) +#define ANOMALY_05000254 /* Incorrect Timer Pulse Width in Single-Shot PWM_OUT + mode with external clock */ +#define ANOMALY_05000266 /* IMDMA destination IRQ status must be read prior to + using IMDMA */ +#endif + +#if (defined(CONFIG_BF_REV_0_3)) +#define ANOMALY_05000156 /* Timers in PWM-Out Mode with PPI GP Receive (Input) + Mode with 0 Frame Syncs */ +#define ANOMALY_05000168 /* SDRAM auto-refresh and subsequent Power Ups */ +#define ANOMALY_05000169 /* DATA CPLB page miss can result in lost write-through + cache data writes */ +#define ANOMALY_05000171 /* Boot-ROM code modifies SICA_IWRx wakeup registers */ +#define ANOMALY_05000174 /* Cache Fill Buffer Data lost */ +#define ANOMALY_05000175 /* Overlapping Sequencer and Memory Stalls */ +#define ANOMALY_05000176 /* Multiplication of (-1) by (-1) followed by an + accumulator saturation */ +#define ANOMALY_05000179 /* PPI_COUNT cannot be programmed to 0 in General + Purpose TX or RX modes */ +#define ANOMALY_05000181 /* Disabling the PPI resets the PPI configuration + registers */ +#define ANOMALY_05000184 /* Timer Pin limitations for PPI TX Modes with + External Frame Syncs */ +#define ANOMALY_05000185 /* PPI TX Mode with 2 External Frame Syncs */ +#define ANOMALY_05000186 /* PPI packing with Data Length greater than 8 bits + (not a meaningful mode) */ +#define ANOMALY_05000188 /* IMDMA Restrictions on Descriptor and Buffer + Placement in Memory */ +#define ANOMALY_05000189 /* False Protection Exception */ +#define ANOMALY_05000193 /* False Flag Pin Interrupts on Edge Sensitive Inputs + when polarity setting is changed */ +#define ANOMALY_05000194 /* Restarting SPORT in specific modes may cause data + corruption */ +#define ANOMALY_05000198 /* Failing MMR accesses when stalled by preceding + memory read */ +#define ANOMALY_05000199 /* DMA current address shows wrong value during carry + fix */ +#define ANOMALY_05000200 /* SPORT TFS and DT are incorrectly driven during + inactive channels in certain conditions */ +#define ANOMALY_05000202 /* Possible infinite stall with specific dual-DAG + situation */ +#define ANOMALY_05000204 /* Incorrect data read with write-through cache and + allocate cache lines on reads only mode */ +#define ANOMALY_05000205 /* Specific sequence that can cause DMA error or DMA + stopping */ +#define ANOMALY_05000207 /* Recovery from "brown-out" condition */ +#define ANOMALY_05000209 /* Speed-Path in computational unit affects certain + instructions */ +#define ANOMALY_05000215 /* UART TX Interrupt masked erroneously */ +#define ANOMALY_05000219 /* NMI event at boot time results in unpredictable + state */ +#define ANOMALY_05000220 /* Data Corruption with Cached External Memory and + Non-Cached On-Chip L2 Memory */ +#define ANOMALY_05000225 /* Incorrect pulse-width of UART start-bit */ +#define ANOMALY_05000227 /* Scratchpad memory bank reads may return incorrect + data */ +#define ANOMALY_05000230 /* UART Receiver is less robust against Baudrate + Differences in certain Conditions */ +#define ANOMALY_05000231 /* UART STB bit incorrectly affects receiver setting */ +#define ANOMALY_05000232 /* SPORT data transmit lines are incorrectly driven in + multichannel mode */ +#define ANOMALY_05000242 /* DF bit in PLL_CTL register does not respond to + hardware reset */ +#define ANOMALY_05000244 /* If i-cache is on, CSYNC/SSYNC/IDLE around Change of + Control causes failures */ +#define ANOMALY_05000248 /* TESTSET operation forces stall on the other core */ +#define ANOMALY_05000250 /* Incorrect Bit-Shift of Data Word in Multichannel + (TDM) mode in certain conditions */ +#define ANOMALY_05000251 /* Exception not generated for MMR accesses in + reserved region */ +#define ANOMALY_05000253 /* Maximum external clock speed for Timers */ +#define ANOMALY_05000258 /* Instruction Cache is corrupted when bits 9 and 12 + of the ICPLB Data registers differ */ +#define ANOMALY_05000260 /* ICPLB_STATUS MMR register may be corrupted */ +#define ANOMALY_05000261 /* DCPLB_FAULT_ADDR MMR register may be corrupted */ +#define ANOMALY_05000262 /* Stores to data cache may be lost */ +#define ANOMALY_05000263 /* Hardware loop corrupted when taking an ICPLB + exception */ +#define ANOMALY_05000264 /* CSYNC/SSYNC/IDLE causes infinite stall in second + to last instruction in hardware loop */ +#define ANOMALY_05000276 /* Timing requirements change for External Frame + Sync PPI Modes with non-zero PPI_DELAY */ +#define ANOMALY_05000278 /* Disabling Peripherals with DMA running may cause + DMA system instability */ +#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is + not restored */ +#define ANOMALY_05000283 /* An MMR write is stalled indefinitely when killed + in a particular stage */ +#define ANOMALY_05000287 /* A read will receive incorrect data under certain + conditions */ +#define ANOMALY_05000288 /* SPORTs may receive bad data if FIFOs fill up */ +#endif + +#endif /* _MACH_ANOMALY_H_ */ diff --git a/include/asm-blackfin/arch-bf561/bf561_serial.h b/include/asm-blackfin/arch-bf561/bf561_serial.h new file mode 100644 index 0000000..0810228 --- /dev/null +++ b/include/asm-blackfin/arch-bf561/bf561_serial.h @@ -0,0 +1,78 @@ +/* + * U-boot bf561_serial.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _BF561_SERIAL_H_ +#define _BF561_SERIAL_H_ + +#define BYTE_REF(addr) (*((volatile char*)addr)) +#define HALFWORD_REF(addr) (*((volatile short*)addr)) +#define WORD_REF(addr) (*((volatile long*)addr)) + +#define UART_THR_LO HALFWORD_REF(UART_THR) +#define UART_RBR_LO HALFWORD_REF(UART_RBR) +#define UART_DLL_LO HALFWORD_REF(UART_DLL) +#define UART_IER_LO HALFWORD_REF(UART_IER) +#define UART_IER_ERBFI 0x01 +#define UART_IER_ETBEI 0x02 +#define UART_IER_ELSI 0x04 +#define UART_IER_EDDSI 0x08 + +#define UART_DLH_LO HALFWORD_REF(UART_DLH) +#define UART_IIR_LO HALFWORD_REF(UART_IIR) +#define UART_IIR_NOINT 0x01 +#define UART_IIR_STATUS 0x06 +#define UART_IIR_LSR 0x06 +#define UART_IIR_RBR 0x04 +#define UART_IIR_THR 0x02 +#define UART_IIR_MSR 0x00 + +#define UART_LCR_LO HALFWORD_REF(UART_LCR) +#define UART_LCR_WLS5 0 +#define UART_LCR_WLS6 0x01 +#define UART_LCR_WLS7 0x02 +#define UART_LCR_WLS8 0x03 +#define UART_LCR_STB 0x04 +#define UART_LCR_PEN 0x08 +#define UART_LCR_EPS 0x10 +#define UART_LCR_SP 0x20 +#define UART_LCR_SB 0x40 +#define UART_LCR_DLAB 0x80 + +#define UART_MCR_LO HALFWORD_REF(UART_MCR) + +#define UART_LSR_LO HALFWORD_REF(UART_LSR) +#define UART_LSR_DR 0x01 +#define UART_LSR_OE 0x02 +#define UART_LSR_PE 0x04 +#define UART_LSR_FE 0x08 +#define UART_LSR_BI 0x10 +#define UART_LSR_THRE 0x20 +#define UART_LSR_TEMT 0x40 + +#define UART_MSR_LO HALFWORD_REF(UART_MSR) +#define UART_SCR_LO HALFWORD_REF(UART_SCR) +#define UART_GCTL_LO HALFWORD_REF(UART_GCTL) +#define UART_GCTL_UCEN 0x01 + +#endif diff --git a/include/asm-blackfin/arch-bf561/cdefBF561.h b/include/asm-blackfin/arch-bf561/cdefBF561.h new file mode 100644 index 0000000..f217ba7 --- /dev/null +++ b/include/asm-blackfin/arch-bf561/cdefBF561.h @@ -0,0 +1,998 @@ +/* + * cdefBF561.h + * + * (c) Copyright 2001-2004 Analog Devices, Inc. All rights reserved. + * + */ + +/* C POINTERS TO SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561 */ + +#ifndef _CDEF_BF561_H +#define _CDEF_BF561_H + +/* + * #if !defined(__ADSPBF561__) + * #warning cdefBF561.h should only be included for BF561 chip. + * #endif + */ + +/* include all Core registers and bit definitions */ +#include <asm/arch-bf561/defBF561.h> +#include <asm/arch-common/cdef_LPBlackfin.h> + +/* + * System MMR Register Map + */ + +/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */ +#define pPLL_CTL (volatile unsigned short *)PLL_CTL +#define pPLL_DIV (volatile unsigned short *)PLL_DIV +#define pVR_CTL (volatile unsigned short *)VR_CTL +#define pPLL_STAT (volatile unsigned short *)PLL_STAT +#define pPLL_LOCKCNT (volatile unsigned short *)PLL_LOCKCNT + +/* + * System Reset and Interrupt Controller registers for + * core A (0xFFC0 0100-0xFFC0 01FF) + */ +#define pSICA_SWRST (volatile unsigned short *)SICA_SWRST +#define pSICA_SYSCR (volatile unsigned short *)SICA_SYSCR +#define pSICA_RVECT (volatile unsigned short *)SICA_RVECT +#define pSICA_IMASK (volatile unsigned long *)SICA_IMASK +#define pSICA_IMASK0 (volatile unsigned long *)SICA_IMASK0 +#define pSICA_IMASK1 (volatile unsigned long *)SICA_IMASK1 +#define pSICA_IAR0 (volatile unsigned long *)SICA_IAR0 +#define pSICA_IAR1 (volatile unsigned long *)SICA_IAR1 +#define pSICA_IAR2 (volatile unsigned long *)SICA_IAR2 +#define pSICA_IAR3 (volatile unsigned long *)SICA_IAR3 +#define pSICA_IAR4 (volatile unsigned long *)SICA_IAR4 +#define pSICA_IAR5 (volatile unsigned long *)SICA_IAR5 +#define pSICA_IAR6 (volatile unsigned long *)SICA_IAR6 +#define pSICA_IAR7 (volatile unsigned long *)SICA_IAR7 +#define pSICA_ISR0 (volatile unsigned long *)SICA_ISR0 +#define pSICA_ISR1 (volatile unsigned long *)SICA_ISR1 +#define pSICA_IWR0 (volatile unsigned long *)SICA_IWR0 +#define pSICA_IWR1 (volatile unsigned long *)SICA_IWR1 + +/* + * System Reset and Interrupt Controller registers for + * Core B (0xFFC0 1100-0xFFC0 11FF) + */ +#define pSICB_SWRST (volatile unsigned short *)SICB_SWRST +#define pSICB_SYSCR (volatile unsigned short *)SICB_SYSCR +#define pSICB_RVECT (volatile unsigned short *)SICB_RVECT +#define pSICB_IMASK0 (volatile unsigned long *)SICB_IMASK0 +#define pSICB_IMASK1 (volatile unsigned long *)SICB_IMASK1 +#define pSICB_IAR0 (volatile unsigned long *)SICB_IAR0 +#define pSICB_IAR1 (volatile unsigned long *)SICB_IAR1 +#define pSICB_IAR2 (volatile unsigned long *)SICB_IAR2 +#define pSICB_IAR3 (volatile unsigned long *)SICB_IAR3 +#define pSICB_IAR4 (volatile unsigned long *)SICB_IAR4 +#define pSICB_IAR5 (volatile unsigned long *)SICB_IAR5 +#define pSICB_IAR6 (volatile unsigned long *)SICB_IAR6 +#define pSICB_IAR7 (volatile unsigned long *)SICB_IAR7 +#define pSICB_ISR0 (volatile unsigned long *)SICB_ISR0 +#define pSICB_ISR1 (volatile unsigned long *)SICB_ISR1 +#define pSICB_IWR0 (volatile unsigned long *)SICB_IWR0 +#define pSICB_IWR1 (volatile unsigned long *)SICB_IWR1 + +/* Watchdog Timer registers for Core A (0xFFC0 0200-0xFFC0 02FF) */ +#define pWDOGA_CTL (volatile unsigned short *)WDOGA_CTL +#define pWDOGA_CNT (volatile unsigned long *)WDOGA_CNT +#define pWDOGA_STAT (volatile unsigned long *)WDOGA_STAT + +/* Watchdog Timer registers for Core B (0xFFC0 1200-0xFFC0 12FF) */ +#define pWDOGB_CTL (volatile unsigned short *)WDOGB_CTL +#define pWDOGB_CNT (volatile unsigned long *)WDOGB_CNT +#define pWDOGB_STAT (volatile unsigned long *)WDOGB_STAT + +/* UART Controller (0xFFC00400 - 0xFFC004FF) */ +#define pUART_THR (volatile unsigned short *)UART_THR +#define pUART_RBR (volatile unsigned short *)UART_RBR +#define pUART_DLL (volatile unsigned short *)UART_DLL +#define pUART_IER (volatile unsigned short *)UART_IER +#define pUART_DLH (volatile unsigned short *)UART_DLH +#define pUART_IIR (volatile unsigned short *)UART_IIR +#define pUART_LCR (volatile unsigned short *)UART_LCR +#define pUART_MCR (volatile unsigned short *)UART_MCR +#define pUART_LSR (volatile unsigned short *)UART_LSR +#define pUART_MSR (volatile unsigned short *)UART_MSR +#define pUART_SCR (volatile unsigned short *)UART_SCR +#define pUART_GCTL (volatile unsigned short *)UART_GCTL + +/* SPI Controller (0xFFC00500 - 0xFFC005FF) */ +#define pSPI_CTL (volatile unsigned short *)SPI_CTL +#define pSPI_FLG (volatile unsigned short *)SPI_FLG +#define pSPI_STAT (volatile unsigned short *)SPI_STAT +#define pSPI_TDBR (volatile unsigned short *)SPI_TDBR +#define pSPI_RDBR (volatile unsigned short *)SPI_RDBR +#define pSPI_BAUD (volatile unsigned short *)SPI_BAUD +#define pSPI_SHADOW (volatile unsigned short *)SPI_SHADOW + +/* Timer 0-7 registers (0xFFC0 0600-0xFFC0 06FF) */ +#define pTIMER0_CONFIG (volatile unsigned short *)TIMER0_CONFIG +#define pTIMER0_COUNTER (volatile unsigned long *)TIMER0_COUNTER +#define pTIMER0_PERIOD (volatile unsigned long *)TIMER0_PERIOD +#define pTIMER0_WIDTH (volatile unsigned long *)TIMER0_WIDTH +#define pTIMER1_CONFIG (volatile unsigned short *)TIMER1_CONFIG +#define pTIMER1_COUNTER (volatile unsigned long *)TIMER1_COUNTER +#define pTIMER1_PERIOD (volatile unsigned long *)TIMER1_PERIOD +#define pTIMER1_WIDTH (volatile unsigned long *)TIMER1_WIDTH +#define pTIMER2_CONFIG (volatile unsigned short *)TIMER2_CONFIG +#define pTIMER2_COUNTER (volatile unsigned long *)TIMER2_COUNTER +#define pTIMER2_PERIOD (volatile unsigned long *)TIMER2_PERIOD +#define pTIMER2_WIDTH (volatile unsigned long *)TIMER2_WIDTH +#define pTIMER3_CONFIG (volatile unsigned short *)TIMER3_CONFIG +#define pTIMER3_COUNTER (volatile unsigned long *)TIMER3_COUNTER +#define pTIMER3_PERIOD (volatile unsigned long *)TIMER3_PERIOD +#define pTIMER3_WIDTH (volatile unsigned long *)TIMER3_WIDTH +#define pTIMER4_CONFIG (volatile unsigned short *)TIMER4_CONFIG +#define pTIMER4_COUNTER (volatile unsigned long *)TIMER4_COUNTER +#define pTIMER4_PERIOD (volatile unsigned long *)TIMER4_PERIOD +#define pTIMER4_WIDTH (volatile unsigned long *)TIMER4_WIDTH +#define pTIMER5_CONFIG (volatile unsigned short *)TIMER5_CONFIG +#define pTIMER5_COUNTER (volatile unsigned long *)TIMER5_COUNTER +#define pTIMER5_PERIOD (volatile unsigned long *)TIMER5_PERIOD +#define pTIMER5_WIDTH (volatile unsigned long *)TIMER5_WIDTH +#define pTIMER6_CONFIG (volatile unsigned short *)TIMER6_CONFIG +#define pTIMER6_COUNTER (volatile unsigned long *)TIMER6_COUNTER +#define pTIMER6_PERIOD (volatile unsigned long *)TIMER6_PERIOD +#define pTIMER6_WIDTH (volatile unsigned long *)TIMER6_WIDTH +#define pTIMER7_CONFIG (volatile unsigned short *)TIMER7_CONFIG +#define pTIMER7_COUNTER (volatile unsigned long *)TIMER7_COUNTER +#define pTIMER7_PERIOD (volatile unsigned long *)TIMER7_PERIOD +#define pTIMER7_WIDTH (volatile unsigned long *)TIMER7_WIDTH + +/* Timer registers 8-11 (0xFFC0 1600-0xFFC0 16FF) */ +#define pTMRS8_ENABLE (volatile unsigned short *)TMRS8_ENABLE +#define pTMRS8_DISABLE (volatile unsigned short *)TMRS8_DISABLE +#define pTMRS8_STATUS (volatile unsigned long *)TMRS8_STATUS +#define pTIMER8_CONFIG (volatile unsigned short *)TIMER8_CONFIG +#define pTIMER8_COUNTER (volatile unsigned long *)TIMER8_COUNTER +#define pTIMER8_PERIOD (volatile unsigned long *)TIMER8_PERIOD +#define pTIMER8_WIDTH (volatile unsigned long *)TIMER8_WIDTH +#define pTIMER9_CONFIG (volatile unsigned short *)TIMER9_CONFIG +#define pTIMER9_COUNTER (volatile unsigned long *)TIMER9_COUNTER +#define pTIMER9_PERIOD (volatile unsigned long *)TIMER9_PERIOD +#define pTIMER9_WIDTH (volatile unsigned long *)TIMER9_WIDTH +#define pTIMER10_CONFIG (volatile unsigned short *)TIMER10_CONFIG +#define pTIMER10_COUNTER (volatile unsigned long *)TIMER10_COUNTER +#define pTIMER10_PERIOD (volatile unsigned long *)TIMER10_PERIOD +#define pTIMER10_WIDTH (volatile unsigned long *)TIMER10_WIDTH +#define pTIMER11_CONFIG (volatile unsigned short *)TIMER11_CONFIG +#define pTIMER11_COUNTER (volatile unsigned long *)TIMER11_COUNTER +#define pTIMER11_PERIOD (volatile unsigned long *)TIMER11_PERIOD +#define pTIMER11_WIDTH (volatile unsigned long *)TIMER11_WIDTH +#define pTMRS4_ENABLE (volatile unsigned short *)TMRS4_ENABLE +#define pTMRS4_DISABLE (volatile unsigned short *)TMRS4_DISABLE +#define pTMRS4_STATUS (volatile unsigned long *)TMRS4_STATUS + +/* Programmable Flag 0 registers (0xFFC0 0700-0xFFC0 07FF) */ +#define pFIO0_FLAG_D (volatile unsigned short *)FIO0_FLAG_D +#define pFIO0_FLAG_C (volatile unsigned short *)FIO0_FLAG_C +#define pFIO0_FLAG_S (volatile unsigned short *)FIO0_FLAG_S +#define pFIO0_FLAG_T (volatile unsigned short *)FIO0_FLAG_T +#define pFIO0_MASKA_D (volatile unsigned short *)FIO0_MASKA_D +#define pFIO0_MASKA_C (volatile unsigned short *)FIO0_MASKA_C +#define pFIO0_MASKA_S (volatile unsigned short *)FIO0_MASKA_S +#define pFIO0_MASKA_T (volatile unsigned short *)FIO0_MASKA_T +#define pFIO0_MASKB_D (volatile unsigned short *)FIO0_MASKB_D +#define pFIO0_MASKB_C (volatile unsigned short *)FIO0_MASKB_C +#define pFIO0_MASKB_S (volatile unsigned short *)FIO0_MASKB_S +#define pFIO0_MASKB_T (volatile unsigned short *)FIO0_MASKB_T +#define pFIO0_DIR (volatile unsigned short *)FIO0_DIR +#define pFIO0_POLAR (volatile unsigned short *)FIO0_POLAR +#define pFIO0_EDGE (volatile unsigned short *)FIO0_EDGE +#define pFIO0_BOTH (volatile unsigned short *)FIO0_BOTH +#define pFIO0_INEN (volatile unsigned short *)FIO0_INEN + +/* Programmable Flag 1 registers (0xFFC0 1500-0xFFC0 15FF) */ +#define pFIO1_FLAG_D (volatile unsigned short *)FIO1_FLAG_D +#define pFIO1_FLAG_C (volatile unsigned short *)FIO1_FLAG_C +#define pFIO1_FLAG_S (volatile unsigned short *)FIO1_FLAG_S +#define pFIO1_FLAG_T (volatile unsigned short *)FIO1_FLAG_T +#define pFIO1_MASKA_D (volatile unsigned short *)FIO1_MASKA_D +#define pFIO1_MASKA_C (volatile unsigned short *)FIO1_MASKA_C +#define pFIO1_MASKA_S (volatile unsigned short *)FIO1_MASKA_S +#define pFIO1_MASKA_T (volatile unsigned short *)FIO1_MASKA_T +#define pFIO1_MASKB_D (volatile unsigned short *)FIO1_MASKB_D +#define pFIO1_MASKB_C (volatile unsigned short *)FIO1_MASKB_C +#define pFIO1_MASKB_S (volatile unsigned short *)FIO1_MASKB_S +#define pFIO1_MASKB_T (volatile unsigned short *)FIO1_MASKB_T +#define pFIO1_DIR (volatile unsigned short *)FIO1_DIR +#define pFIO1_POLAR (volatile unsigned short *)FIO1_POLAR +#define pFIO1_EDGE (volatile unsigned short *)FIO1_EDGE +#define pFIO1_BOTH (volatile unsigned short *)FIO1_BOTH +#define pFIO1_INEN (volatile unsigned short *)FIO1_INEN + +/* Programmable Flag registers (0xFFC0 1700-0xFFC0 17FF) */ +#define pFIO2_FLAG_D (volatile unsigned short *)FIO2_FLAG_D +#define pFIO2_FLAG_C (volatile unsigned short *)FIO2_FLAG_C +#define pFIO2_FLAG_S (volatile unsigned short *)FIO2_FLAG_S +#define pFIO2_FLAG_T (volatile unsigned short *)FIO2_FLAG_T +#define pFIO2_MASKA_D (volatile unsigned short *)FIO2_MASKA_D +#define pFIO2_MASKA_C (volatile unsigned short *)FIO2_MASKA_C +#define pFIO2_MASKA_S (volatile unsigned short *)FIO2_MASKA_S +#define pFIO2_MASKA_T (volatile unsigned short *)FIO2_MASKA_T +#define pFIO2_MASKB_D (volatile unsigned short *)FIO2_MASKB_D +#define pFIO2_MASKB_C (volatile unsigned short *)FIO2_MASKB_C +#define pFIO2_MASKB_S (volatile unsigned short *)FIO2_MASKB_S +#define pFIO2_MASKB_T (volatile unsigned short *)FIO2_MASKB_T +#define pFIO2_DIR (volatile unsigned short *)FIO2_DIR +#define pFIO2_POLAR (volatile unsigned short *)FIO2_POLAR +#define pFIO2_EDGE (volatile unsigned short *)FIO2_EDGE +#define pFIO2_BOTH (volatile unsigned short *)FIO2_BOTH +#define pFIO2_INEN (volatile unsigned short *)FIO2_INEN + +/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */ +#define pSPORT0_TCR1 (volatile unsigned short *)SPORT0_TCR1 +#define pSPORT0_TCR2 (volatile unsigned short *)SPORT0_TCR2 +#define pSPORT0_TCLKDIV (volatile unsigned short *)SPORT0_TCLKDIV +#define pSPORT0_TFSDIV (volatile unsigned short *)SPORT0_TFSDIV +#define pSPORT0_TX (volatile unsigned long *)SPORT0_TX +#define pSPORT0_RX (volatile unsigned long *)SPORT0_RX +#define pSPORT0_TX32 ((volatile long *)SPORT0_TX) +#define pSPORT0_RX32 ((volatile long *)SPORT0_RX) +#define pSPORT0_TX16 ((volatile unsigned short *)SPORT0_TX) +#define pSPORT0_RX16 ((volatile unsigned short *)SPORT0_RX) +#define pSPORT0_RCR1 (volatile unsigned short *)SPORT0_RCR1 +#define pSPORT0_RCR2 (volatile unsigned short *)SPORT0_RCR2 +#define pSPORT0_RCLKDIV (volatile unsigned short *)SPORT0_RCLKDIV +#define pSPORT0_RFSDIV (volatile unsigned short *)SPORT0_RFSDIV +#define pSPORT0_STAT (volatile unsigned short *)SPORT0_STAT +#define pSPORT0_CHNL (volatile unsigned short *)SPORT0_CHNL +#define pSPORT0_MCMC1 (volatile unsigned short *)SPORT0_MCMC1 +#define pSPORT0_MCMC2 (volatile unsigned short *)SPORT0_MCMC2 +#define pSPORT0_MTCS0 (volatile unsigned long *)SPORT0_MTCS0 +#define pSPORT0_MTCS1 (volatile unsigned long *)SPORT0_MTCS1 +#define pSPORT0_MTCS2 (volatile unsigned long *)SPORT0_MTCS2 +#define pSPORT0_MTCS3 (volatile unsigned long *)SPORT0_MTCS3 +#define pSPORT0_MRCS0 (volatile unsigned long *)SPORT0_MRCS0 +#define pSPORT0_MRCS1 (volatile unsigned long *)SPORT0_MRCS1 +#define pSPORT0_MRCS2 (volatile unsigned long *)SPORT0_MRCS2 +#define pSPORT0_MRCS3 (volatile unsigned long *)SPORT0_MRCS3 + +/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */ +#define pSPORT1_TCR1 (volatile unsigned short *)SPORT1_TCR1 +#define pSPORT1_TCR2 (volatile unsigned short *)SPORT1_TCR2 +#define pSPORT1_TCLKDIV (volatile unsigned short *)SPORT1_TCLKDIV +#define pSPORT1_TFSDIV (volatile unsigned short *)SPORT1_TFSDIV +#define pSPORT1_TX (volatile unsigned long *)SPORT1_TX +#define pSPORT1_RX (volatile unsigned long *)SPORT1_RX +#define pSPORT1_TX32 ((volatile long *)SPORT1_TX) +#define pSPORT1_RX32 ((volatile long *)SPORT1_RX) +#define pSPORT1_TX16 ((volatile unsigned short *)SPORT1_TX) +#define pSPORT1_RX16 ((volatile unsigned short *)SPORT1_RX) +#define pSPORT1_RCR1 (volatile unsigned short *)SPORT1_RCR1 +#define pSPORT1_RCR2 (volatile unsigned short *)SPORT1_RCR2 +#define pSPORT1_RCLKDIV (volatile unsigned short *)SPORT1_RCLKDIV +#define pSPORT1_RFSDIV (volatile unsigned short *)SPORT1_RFSDIV +#define pSPORT1_STAT (volatile unsigned short *)SPORT1_STAT +#define pSPORT1_CHNL (volatile unsigned short *)SPORT1_CHNL +#define pSPORT1_MCMC1 (volatile unsigned short *)SPORT1_MCMC1 +#define pSPORT1_MCMC2 (volatile unsigned short *)SPORT1_MCMC2 +#define pSPORT1_MTCS0 (volatile unsigned long *)SPORT1_MTCS0 +#define pSPORT1_MTCS1 (volatile unsigned long *)SPORT1_MTCS1 +#define pSPORT1_MTCS2 (volatile unsigned long *)SPORT1_MTCS2 +#define pSPORT1_MTCS3 (volatile unsigned long *)SPORT1_MTCS3 +#define pSPORT1_MRCS0 (volatile unsigned long *)SPORT1_MRCS0 +#define pSPORT1_MRCS1 (volatile unsigned long *)SPORT1_MRCS1 +#define pSPORT1_MRCS2 (volatile unsigned long *)SPORT1_MRCS2 +#define pSPORT1_MRCS3 (volatile unsigned long *)SPORT1_MRCS3 + +/* Asynchronous Memory Controller - External Bus Interface Unit */ +#define pEBIU_AMGCTL (volatile unsigned short *)EBIU_AMGCTL +#define pEBIU_AMBCTL0 (volatile unsigned long *)EBIU_AMBCTL0 +#define pEBIU_AMBCTL1 (volatile unsigned long *)EBIU_AMBCTL1 + +/* SDRAM Controller External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */ +#define pEBIU_SDGCTL (volatile unsigned long *)EBIU_SDGCTL +#define pEBIU_SDBCTL (volatile unsigned long *)EBIU_SDBCTL +#define pEBIU_SDRRC (volatile unsigned short *)EBIU_SDRRC +#define pEBIU_SDSTAT (volatile unsigned short *)EBIU_SDSTAT + +/* Parallel Peripheral Interface (PPI) 0 registers (0xFFC0 1000-0xFFC0 10FF)*/ +#define pPPI0_CONTROL (volatile unsigned short *)PPI0_CONTROL +#define pPPI0_STATUS (volatile unsigned short *)PPI0_STATUS +#define pPPI0_COUNT (volatile unsigned short *)PPI0_COUNT +#define pPPI0_DELAY (volatile unsigned short *)PPI0_DELAY +#define pPPI0_FRAME (volatile unsigned short *)PPI0_FRAME + +/* Parallel Peripheral Interface (PPI) 1 registers (0xFFC0 1300-0xFFC0 13FF)*/ +#define pPPI1_CONTROL (volatile unsigned short *)PPI1_CONTROL +#define pPPI1_STATUS (volatile unsigned short *)PPI1_STATUS +#define pPPI1_COUNT (volatile unsigned short *)PPI1_COUNT +#define pPPI1_DELAY (volatile unsigned short *)PPI1_DELAY +#define pPPI1_FRAME (volatile unsigned short *)PPI1_FRAME + +/*DMA Traffic controls*/ +#define pDMA_TCPER ((volatile unsigned short *)DMA_TCPER) +#define pDMA_TCCNT ((volatile unsigned short *)DMA_TCCNT) +#define pDMA_TC_PER ((volatile unsigned short *)DMA_TC_PER) +#define pDMA_TC_CNT ((volatile unsigned short *)DMA_TC_CNT) + +/* DMA1 Controller registers (0xFFC0 1C00-0xFFC0 1FFF) */ +#define pDMA1_0_CONFIG (volatile unsigned short *)DMA1_0_CONFIG +#define pDMA1_0_NEXT_DESC_PTR (volatile void **)DMA1_0_NEXT_DESC_PTR +#define pDMA1_0_START_ADDR (volatile void **)DMA1_0_START_ADDR +#define pDMA1_0_X_COUNT (volatile unsigned short *)DMA1_0_X_COUNT +#define pDMA1_0_Y_COUNT (volatile unsigned short *)DMA1_0_Y_COUNT +#define pDMA1_0_X_MODIFY (volatile unsigned short *)DMA1_0_X_MODIFY +#define pDMA1_0_Y_MODIFY (volatile unsigned short *)DMA1_0_Y_MODIFY +#define pDMA1_0_CURR_DESC_PTR (volatile void **)DMA1_0_CURR_DESC_PTR +#define pDMA1_0_CURR_ADDR (volatile void **)DMA1_0_CURR_ADDR +#define pDMA1_0_CURR_X_COUNT (volatile unsigned short *)DMA1_0_CURR_X_COUNT +#define pDMA1_0_CURR_Y_COUNT (volatile unsigned short *)DMA1_0_CURR_Y_COUNT +#define pDMA1_0_IRQ_STATUS (volatile unsigned short *)DMA1_0_IRQ_STATUS +#define pDMA1_0_PERIPHERAL_MAP (volatile unsigned short *)DMA1_0_PERIPHERAL_MAP +#define pDMA1_1_CONFIG (volatile unsigned short *)DMA1_1_CONFIG +#define pDMA1_1_NEXT_DESC_PTR (volatile void **)DMA1_1_NEXT_DESC_PTR +#define pDMA1_1_START_ADDR (volatile void **)DMA1_1_START_ADDR +#define pDMA1_1_X_COUNT (volatile unsigned short *)DMA1_1_X_COUNT +#define pDMA1_1_Y_COUNT (volatile unsigned short *)DMA1_1_Y_COUNT +#define pDMA1_1_X_MODIFY (volatile unsigned short *)DMA1_1_X_MODIFY +#define pDMA1_1_Y_MODIFY (volatile unsigned short *)DMA1_1_Y_MODIFY +#define pDMA1_1_CURR_DESC_PTR (volatile void **)DMA1_1_CURR_DESC_PTR +#define pDMA1_1_CURR_ADDR (volatile void **)DMA1_1_CURR_ADDR +#define pDMA1_1_CURR_X_COUNT (volatile unsigned short *)DMA1_1_CURR_X_COUNT +#define pDMA1_1_CURR_Y_COUNT (volatile unsigned short *)DMA1_1_CURR_Y_COUNT +#define pDMA1_1_IRQ_STATUS (volatile unsigned short *)DMA1_1_IRQ_STATUS +#define pDMA1_1_PERIPHERAL_MAP (volatile unsigned short *)DMA1_1_PERIPHERAL_MAP +#define pDMA1_2_CONFIG (volatile unsigned short *)DMA1_2_CONFIG +#define pDMA1_2_NEXT_DESC_PTR (volatile void **)DMA1_2_NEXT_DESC_PTR +#define pDMA1_2_START_ADDR (volatile void **)DMA1_2_START_ADDR +#define pDMA1_2_X_COUNT (volatile unsigned short *)DMA1_2_X_COUNT +#define pDMA1_2_Y_COUNT (volatile unsigned short *)DMA1_2_Y_COUNT +#define pDMA1_2_X_MODIFY (volatile unsigned short *)DMA1_2_X_MODIFY +#define pDMA1_2_Y_MODIFY (volatile unsigned short *)DMA1_2_Y_MODIFY +#define pDMA1_2_CURR_DESC_PTR (volatile void **)DMA1_2_CURR_DESC_PTR +#define pDMA1_2_CURR_ADDR (volatile void **)DMA1_2_CURR_ADDR +#define pDMA1_2_CURR_X_COUNT (volatile unsigned short *)DMA1_2_CURR_X_COUNT +#define pDMA1_2_CURR_Y_COUNT (volatile unsigned short *)DMA1_2_CURR_Y_COUNT +#define pDMA1_2_IRQ_STATUS (volatile unsigned short *)DMA1_2_IRQ_STATUS +#define pDMA1_2_PERIPHERAL_MAP (volatile unsigned short *)DMA1_2_PERIPHERAL_MAP +#define pDMA1_3_CONFIG (volatile unsigned short *)DMA1_3_CONFIG +#define pDMA1_3_NEXT_DESC_PTR (volatile void **)DMA1_3_NEXT_DESC_PTR +#define pDMA1_3_START_ADDR (volatile void **)DMA1_3_START_ADDR +#define pDMA1_3_X_COUNT (volatile unsigned short *)DMA1_3_X_COUNT +#define pDMA1_3_Y_COUNT (volatile unsigned short *)DMA1_3_Y_COUNT +#define pDMA1_3_X_MODIFY (volatile unsigned short *)DMA1_3_X_MODIFY +#define pDMA1_3_Y_MODIFY (volatile unsigned short *)DMA1_3_Y_MODIFY +#define pDMA1_3_CURR_DESC_PTR (volatile void **)DMA1_3_CURR_DESC_PTR +#define pDMA1_3_CURR_ADDR (volatile void **)DMA1_3_CURR_ADDR +#define pDMA1_3_CURR_X_COUNT (volatile unsigned short *)DMA1_3_CURR_X_COUNT +#define pDMA1_3_CURR_Y_COUNT (volatile unsigned short *)DMA1_3_CURR_Y_COUNT +#define pDMA1_3_IRQ_STATUS (volatile unsigned short *)DMA1_3_IRQ_STATUS +#define pDMA1_3_PERIPHERAL_MAP (volatile unsigned short *)DMA1_3_PERIPHERAL_MAP +#define pDMA1_4_CONFIG (volatile unsigned short *)DMA1_4_CONFIG +#define pDMA1_4_NEXT_DESC_PTR (volatile void **)DMA1_4_NEXT_DESC_PTR +#define pDMA1_4_START_ADDR (volatile void **)DMA1_4_START_ADDR +#define pDMA1_4_X_COUNT (volatile unsigned short *)DMA1_4_X_COUNT +#define pDMA1_4_Y_COUNT (volatile unsigned short *)DMA1_4_Y_COUNT +#define pDMA1_4_X_MODIFY (volatile unsigned short *)DMA1_4_X_MODIFY +#define pDMA1_4_Y_MODIFY (volatile unsigned short *)DMA1_4_Y_MODIFY +#define pDMA1_4_CURR_DESC_PTR (volatile void **)DMA1_4_CURR_DESC_PTR +#define pDMA1_4_CURR_ADDR (volatile void **)DMA1_4_CURR_ADDR +#define pDMA1_4_CURR_X_COUNT (volatile unsigned short *)DMA1_4_CURR_X_COUNT +#define pDMA1_4_CURR_Y_COUNT (volatile unsigned short *)DMA1_4_CURR_Y_COUNT +#define pDMA1_4_IRQ_STATUS (volatile unsigned short *)DMA1_4_IRQ_STATUS +#define pDMA1_4_PERIPHERAL_MAP (volatile unsigned short *)DMA1_4_PERIPHERAL_MAP +#define pDMA1_5_CONFIG (volatile unsigned short *)DMA1_5_CONFIG +#define pDMA1_5_NEXT_DESC_PTR (volatile void **)DMA1_5_NEXT_DESC_PTR +#define pDMA1_5_START_ADDR (volatile void **)DMA1_5_START_ADDR +#define pDMA1_5_X_COUNT (volatile unsigned short *)DMA1_5_X_COUNT +#define pDMA1_5_Y_COUNT (volatile unsigned short *)DMA1_5_Y_COUNT +#define pDMA1_5_X_MODIFY (volatile unsigned short *)DMA1_5_X_MODIFY +#define pDMA1_5_Y_MODIFY (volatile unsigned short *)DMA1_5_Y_MODIFY +#define pDMA1_5_CURR_DESC_PTR (volatile void **)DMA1_5_CURR_DESC_PTR +#define pDMA1_5_CURR_ADDR (volatile void **)DMA1_5_CURR_ADDR +#define pDMA1_5_CURR_X_COUNT (volatile unsigned short *)DMA1_5_CURR_X_COUNT +#define pDMA1_5_CURR_Y_COUNT (volatile unsigned short *)DMA1_5_CURR_Y_COUNT +#define pDMA1_5_IRQ_STATUS (volatile unsigned short *)DMA1_5_IRQ_STATUS +#define pDMA1_5_PERIPHERAL_MAP (volatile unsigned short *)DMA1_5_PERIPHERAL_MAP +#define pDMA1_6_CONFIG (volatile unsigned short *)DMA1_6_CONFIG +#define pDMA1_6_NEXT_DESC_PTR (volatile void **)DMA1_6_NEXT_DESC_PTR +#define pDMA1_6_START_ADDR (volatile void **)DMA1_6_START_ADDR +#define pDMA1_6_X_COUNT (volatile unsigned short *)DMA1_6_X_COUNT +#define pDMA1_6_Y_COUNT (volatile unsigned short *)DMA1_6_Y_COUNT +#define pDMA1_6_X_MODIFY (volatile unsigned short *)DMA1_6_X_MODIFY +#define pDMA1_6_Y_MODIFY (volatile unsigned short *)DMA1_6_Y_MODIFY +#define pDMA1_6_CURR_DESC_PTR (volatile void **)DMA1_6_CURR_DESC_PTR +#define pDMA1_6_CURR_ADDR (volatile void **)DMA1_6_CURR_ADDR +#define pDMA1_6_CURR_X_COUNT (volatile unsigned short *)DMA1_6_CURR_X_COUNT +#define pDMA1_6_CURR_Y_COUNT (volatile unsigned short *)DMA1_6_CURR_Y_COUNT +#define pDMA1_6_IRQ_STATUS (volatile unsigned short *)DMA1_6_IRQ_STATUS +#define pDMA1_6_PERIPHERAL_MAP (volatile unsigned short *)DMA1_6_PERIPHERAL_MAP +#define pDMA1_7_CONFIG (volatile unsigned short *)DMA1_7_CONFIG +#define pDMA1_7_NEXT_DESC_PTR (volatile void **)DMA1_7_NEXT_DESC_PTR +#define pDMA1_7_START_ADDR (volatile void **)DMA1_7_START_ADDR +#define pDMA1_7_X_COUNT (volatile unsigned short *)DMA1_7_X_COUNT +#define pDMA1_7_Y_COUNT (volatile unsigned short *)DMA1_7_Y_COUNT +#define pDMA1_7_X_MODIFY (volatile unsigned short *)DMA1_7_X_MODIFY +#define pDMA1_7_Y_MODIFY (volatile unsigned short *)DMA1_7_Y_MODIFY +#define pDMA1_7_CURR_DESC_PTR (volatile void **)DMA1_7_CURR_DESC_PTR +#define pDMA1_7_CURR_ADDR (volatile void **)DMA1_7_CURR_ADDR +#define pDMA1_7_CURR_X_COUNT (volatile unsigned short *)DMA1_7_CURR_X_COUNT +#define pDMA1_7_CURR_Y_COUNT (volatile unsigned short *)DMA1_7_CURR_Y_COUNT +#define pDMA1_7_IRQ_STATUS (volatile unsigned short *)DMA1_7_IRQ_STATUS +#define pDMA1_7_PERIPHERAL_MAP (volatile unsigned short *)DMA1_7_PERIPHERAL_MAP +#define pDMA1_8_CONFIG (volatile unsigned short *)DMA1_8_CONFIG +#define pDMA1_8_NEXT_DESC_PTR (volatile void **)DMA1_8_NEXT_DESC_PTR +#define pDMA1_8_START_ADDR (volatile void **)DMA1_8_START_ADDR +#define pDMA1_8_X_COUNT (volatile unsigned short *)DMA1_8_X_COUNT +#define pDMA1_8_Y_COUNT (volatile unsigned short *)DMA1_8_Y_COUNT +#define pDMA1_8_X_MODIFY (volatile unsigned short *)DMA1_8_X_MODIFY +#define pDMA1_8_Y_MODIFY (volatile unsigned short *)DMA1_8_Y_MODIFY +#define pDMA1_8_CURR_DESC_PTR (volatile void **)DMA1_8_CURR_DESC_PTR +#define pDMA1_8_CURR_ADDR (volatile void **)DMA1_8_CURR_ADDR +#define pDMA1_8_CURR_X_COUNT (volatile unsigned short *)DMA1_8_CURR_X_COUNT +#define pDMA1_8_CURR_Y_COUNT (volatile unsigned short *)DMA1_8_CURR_Y_COUNT +#define pDMA1_8_IRQ_STATUS (volatile unsigned short *)DMA1_8_IRQ_STATUS +#define pDMA1_8_PERIPHERAL_MAP (volatile unsigned short *)DMA1_8_PERIPHERAL_MAP +#define pDMA1_9_CONFIG (volatile unsigned short *)DMA1_9_CONFIG +#define pDMA1_9_NEXT_DESC_PTR (volatile void **)DMA1_9_NEXT_DESC_PTR +#define pDMA1_9_START_ADDR (volatile void **)DMA1_9_START_ADDR +#define pDMA1_9_X_COUNT (volatile unsigned short *)DMA1_9_X_COUNT +#define pDMA1_9_Y_COUNT (volatile unsigned short *)DMA1_9_Y_COUNT +#define pDMA1_9_X_MODIFY (volatile unsigned short *)DMA1_9_X_MODIFY +#define pDMA1_9_Y_MODIFY (volatile unsigned short *)DMA1_9_Y_MODIFY +#define pDMA1_9_CURR_DESC_PTR (volatile void **)DMA1_9_CURR_DESC_PTR +#define pDMA1_9_CURR_ADDR (volatile void **)DMA1_9_CURR_ADDR +#define pDMA1_9_CURR_X_COUNT (volatile unsigned short *)DMA1_9_CURR_X_COUNT +#define pDMA1_9_CURR_Y_COUNT (volatile unsigned short *)DMA1_9_CURR_Y_COUNT +#define pDMA1_9_IRQ_STATUS (volatile unsigned short *)DMA1_9_IRQ_STATUS +#define pDMA1_9_PERIPHERAL_MAP (volatile unsigned short *)DMA1_9_PERIPHERAL_MAP +#define pDMA1_10_CONFIG (volatile unsigned short *)DMA1_10_CONFIG +#define pDMA1_10_NEXT_DESC_PTR (volatile void **)DMA1_10_NEXT_DESC_PTR +#define pDMA1_10_START_ADDR (volatile void **)DMA1_10_START_ADDR +#define pDMA1_10_X_COUNT (volatile unsigned short *)DMA1_10_X_COUNT +#define pDMA1_10_Y_COUNT (volatile unsigned short *)DMA1_10_Y_COUNT +#define pDMA1_10_X_MODIFY (volatile unsigned short *)DMA1_10_X_MODIFY +#define pDMA1_10_Y_MODIFY (volatile unsigned short *)DMA1_10_Y_MODIFY +#define pDMA1_10_CURR_DESC_PTR (volatile void **)DMA1_10_CURR_DESC_PTR +#define pDMA1_10_CURR_ADDR (volatile void **)DMA1_10_CURR_ADDR +#define pDMA1_10_CURR_X_COUNT (volatile unsigned short *)DMA1_10_CURR_X_COUNT +#define pDMA1_10_CURR_Y_COUNT (volatile unsigned short *)DMA1_10_CURR_Y_COUNT +#define pDMA1_10_IRQ_STATUS (volatile unsigned short *)DMA1_10_IRQ_STATUS +#define pDMA1_10_PERIPHERAL_MAP (volatile unsigned short *)DMA1_10_PERIPHERAL_MAP +#define pDMA1_11_CONFIG (volatile unsigned short *)DMA1_11_CONFIG +#define pDMA1_11_NEXT_DESC_PTR (volatile void **)DMA1_11_NEXT_DESC_PTR +#define pDMA1_11_START_ADDR (volatile void **)DMA1_11_START_ADDR +#define pDMA1_11_X_COUNT (volatile unsigned short *)DMA1_11_X_COUNT +#define pDMA1_11_Y_COUNT (volatile unsigned short *)DMA1_11_Y_COUNT +#define pDMA1_11_X_MODIFY (volatile signed short *)DMA1_11_X_MODIFY +#define pDMA1_11_Y_MODIFY (volatile signed short *)DMA1_11_Y_MODIFY +#define pDMA1_11_CURR_DESC_PTR (volatile void **)DMA1_11_CURR_DESC_PTR +#define pDMA1_11_CURR_ADDR (volatile void **)DMA1_11_CURR_ADDR +#define pDMA1_11_CURR_X_COUNT (volatile unsigned short *)DMA1_11_CURR_X_COUNT +#define pDMA1_11_CURR_Y_COUNT (volatile unsigned short *)DMA1_11_CURR_Y_COUNT +#define pDMA1_11_IRQ_STATUS (volatile unsigned short *)DMA1_11_IRQ_STATUS +#define pDMA1_11_PERIPHERAL_MAP (volatile unsigned short *)DMA1_11_PERIPHERAL_MAP + +/* Memory DMA1 Controller registers (0xFFC0 1E80-0xFFC0 1FFF)*/ +#define pMDMA1_D0_CONFIG (volatile unsigned short *)MDMA1_D0_CONFIG +#define pMDMA1_D0_NEXT_DESC_PTR (volatile void **)MDMA1_D0_NEXT_DESC_PTR +#define pMDMA1_D0_START_ADDR (volatile void **)MDMA1_D0_START_ADDR +#define pMDMA1_D0_X_COUNT (volatile unsigned short *)MDMA1_D0_X_COUNT +#define pMDMA1_D0_Y_COUNT (volatile unsigned short *)MDMA1_D0_Y_COUNT +#define pMDMA1_D0_X_MODIFY (volatile signed short *)MDMA1_D0_X_MODIFY +#define pMDMA1_D0_Y_MODIFY (volatile signed short *)MDMA1_D0_Y_MODIFY +#define pMDMA1_D0_CURR_DESC_PTR (volatile void **)MDMA1_D0_CURR_DESC_PTR +#define pMDMA1_D0_CURR_ADDR (volatile void **)MDMA1_D0_CURR_ADDR +#define pMDMA1_D0_CURR_X_COUNT (volatile unsigned short *)MDMA1_D0_CURR_X_COUNT +#define pMDMA1_D0_CURR_Y_COUNT (volatile unsigned short *)MDMA1_D0_CURR_Y_COUNT +#define pMDMA1_D0_IRQ_STATUS (volatile unsigned short *)MDMA1_D0_IRQ_STATUS +#define pMDMA1_D0_PERIPHERAL_MAP (volatile unsigned short *)MDMA1_D0_PERIPHERAL_MAP +#define pMDMA1_S0_CONFIG (volatile unsigned short *)MDMA1_S0_CONFIG +#define pMDMA1_S0_NEXT_DESC_PTR (volatile void **)MDMA1_S0_NEXT_DESC_PTR +#define pMDMA1_S0_START_ADDR (volatile void **)MDMA1_S0_START_ADDR +#define pMDMA1_S0_X_COUNT (volatile unsigned short *)MDMA1_S0_X_COUNT +#define pMDMA1_S0_Y_COUNT (volatile unsigned short *)MDMA1_S0_Y_COUNT +#define pMDMA1_S0_X_MODIFY (volatile signed short *)MDMA1_S0_X_MODIFY +#define pMDMA1_S0_Y_MODIFY (volatile signed short *)MDMA1_S0_Y_MODIFY +#define pMDMA1_S0_CURR_DESC_PTR (volatile void **)MDMA1_S0_CURR_DESC_PTR +#define pMDMA1_S0_CURR_ADDR (volatile void **)MDMA1_S0_CURR_ADDR +#define pMDMA1_S0_CURR_X_COUNT (volatile unsigned short *)MDMA1_S0_CURR_X_COUNT +#define pMDMA1_S0_CURR_Y_COUNT (volatile unsigned short *)MDMA1_S0_CURR_Y_COUNT +#define pMDMA1_S0_IRQ_STATUS (volatile unsigned short *)MDMA1_S0_IRQ_STATUS +#define pMDMA1_S0_PERIPHERAL_MAP (volatile unsigned short *)MDMA1_S0_PERIPHERAL_MAP +#define pMDMA1_D1_CONFIG (volatile unsigned short *)MDMA1_D1_CONFIG +#define pMDMA1_D1_NEXT_DESC_PTR (volatile void **)MDMA1_D1_NEXT_DESC_PTR +#define pMDMA1_D1_START_ADDR (volatile void **)MDMA1_D1_START_ADDR +#define pMDMA1_D1_X_COUNT (volatile unsigned short *)MDMA1_D1_X_COUNT +#define pMDMA1_D1_Y_COUNT (volatile unsigned short *)MDMA1_D1_Y_COUNT +#define pMDMA1_D1_X_MODIFY (volatile signed short *)MDMA1_D1_X_MODIFY +#define pMDMA1_D1_Y_MODIFY (volatile signed short *)MDMA1_D1_Y_MODIFY +#define pMDMA1_D1_CURR_DESC_PTR (volatile void **)MDMA1_D1_CURR_DESC_PTR +#define pMDMA1_D1_CURR_ADDR (volatile void **)MDMA1_D1_CURR_ADDR +#define pMDMA1_D1_CURR_X_COUNT (volatile unsigned short *)MDMA1_D1_CURR_X_COUNT +#define pMDMA1_D1_CURR_Y_COUNT (volatile unsigned short *)MDMA1_D1_CURR_Y_COUNT +#define pMDMA1_D1_IRQ_STATUS (volatile unsigned short *)MDMA1_D1_IRQ_STATUS +#define pMDMA1_D1_PERIPHERAL_MAP (volatile unsigned short *)MDMA1_D1_PERIPHERAL_MAP +#define pMDMA1_S1_CONFIG (volatile unsigned short *)MDMA1_S1_CONFIG +#define pMDMA1_S1_NEXT_DESC_PTR (volatile void **)MDMA1_S1_NEXT_DESC_PTR +#define pMDMA1_S1_START_ADDR (volatile void **)MDMA1_S1_START_ADDR +#define pMDMA1_S1_X_COUNT (volatile unsigned short *)MDMA1_S1_X_COUNT +#define pMDMA1_S1_Y_COUNT (volatile unsigned short *)MDMA1_S1_Y_COUNT +#define pMDMA1_S1_X_MODIFY (volatile signed short *)MDMA1_S1_X_MODIFY +#define pMDMA1_S1_Y_MODIFY (volatile signed short *)MDMA1_S1_Y_MODIFY +#define pMDMA1_S1_CURR_DESC_PTR (volatile void **)MDMA1_S1_CURR_DESC_PTR +#define pMDMA1_S1_CURR_ADDR (volatile void **)MDMA1_S1_CURR_ADDR +#define pMDMA1_S1_CURR_X_COUNT (volatile unsigned short *)MDMA1_S1_CURR_X_COUNT +#define pMDMA1_S1_CURR_Y_COUNT (volatile unsigned short *)MDMA1_S1_CURR_Y_COUNT +#define pMDMA1_S1_IRQ_STATUS (volatile unsigned short *)MDMA1_S1_IRQ_STATUS +#define pMDMA1_S1_PERIPHERAL_MAP (volatile unsigned short *)MDMA1_S1_PERIPHERAL_MAP + +/* DMA2 Controller registers (0xFFC0 0C00-0xFFC0 0DFF) */ +#define pDMA2_0_CONFIG (volatile unsigned short *)DMA2_0_CONFIG +#define pDMA2_0_NEXT_DESC_PTR (volatile void **)DMA2_0_NEXT_DESC_PTR +#define pDMA2_0_START_ADDR (volatile void **)DMA2_0_START_ADDR +#define pDMA2_0_X_COUNT (volatile unsigned short *)DMA2_0_X_COUNT +#define pDMA2_0_Y_COUNT (volatile unsigned short *)DMA2_0_Y_COUNT +#define pDMA2_0_X_MODIFY (volatile signed short *)DMA2_0_X_MODIFY +#define pDMA2_0_Y_MODIFY (volatile signed short *)DMA2_0_Y_MODIFY +#define pDMA2_0_CURR_DESC_PTR (volatile void **)DMA2_0_CURR_DESC_PTR +#define pDMA2_0_CURR_ADDR (volatile void **)DMA2_0_CURR_ADDR +#define pDMA2_0_CURR_X_COUNT (volatile unsigned short *)DMA2_0_CURR_X_COUNT +#define pDMA2_0_CURR_Y_COUNT (volatile unsigned short *)DMA2_0_CURR_Y_COUNT +#define pDMA2_0_IRQ_STATUS (volatile unsigned short *)DMA2_0_IRQ_STATUS +#define pDMA2_0_PERIPHERAL_MAP (volatile unsigned short *)DMA2_0_PERIPHERAL_MAP +#define pDMA2_1_CONFIG (volatile unsigned short *)DMA2_1_CONFIG +#define pDMA2_1_NEXT_DESC_PTR (volatile void **)DMA2_1_NEXT_DESC_PTR +#define pDMA2_1_START_ADDR (volatile void **)DMA2_1_START_ADDR +#define pDMA2_1_X_COUNT (volatile unsigned short *)DMA2_1_X_COUNT +#define pDMA2_1_Y_COUNT (volatile unsigned short *)DMA2_1_Y_COUNT +#define pDMA2_1_X_MODIFY (volatile signed short *)DMA2_1_X_MODIFY +#define pDMA2_1_Y_MODIFY (volatile signed short *)DMA2_1_Y_MODIFY +#define pDMA2_1_CURR_DESC_PTR (volatile void **)DMA2_1_CURR_DESC_PTR +#define pDMA2_1_CURR_ADDR (volatile void **)DMA2_1_CURR_ADDR +#define pDMA2_1_CURR_X_COUNT (volatile unsigned short *)DMA2_1_CURR_X_COUNT +#define pDMA2_1_CURR_Y_COUNT (volatile unsigned short *)DMA2_1_CURR_Y_COUNT +#define pDMA2_1_IRQ_STATUS (volatile unsigned short *)DMA2_1_IRQ_STATUS +#define pDMA2_1_PERIPHERAL_MAP (volatile unsigned short *)DMA2_1_PERIPHERAL_MAP +#define pDMA2_2_CONFIG (volatile unsigned short *)DMA2_2_CONFIG +#define pDMA2_2_NEXT_DESC_PTR (volatile void **)DMA2_2_NEXT_DESC_PTR +#define pDMA2_2_START_ADDR (volatile void **)DMA2_2_START_ADDR +#define pDMA2_2_X_COUNT (volatile unsigned short *)DMA2_2_X_COUNT +#define pDMA2_2_Y_COUNT (volatile unsigned short *)DMA2_2_Y_COUNT +#define pDMA2_2_X_MODIFY (volatile signed short *)DMA2_2_X_MODIFY +#define pDMA2_2_Y_MODIFY (volatile signed short *)DMA2_2_Y_MODIFY +#define pDMA2_2_CURR_DESC_PTR (volatile void **)DMA2_2_CURR_DESC_PTR +#define pDMA2_2_CURR_ADDR (volatile void **)DMA2_2_CURR_ADDR +#define pDMA2_2_CURR_X_COUNT (volatile unsigned short *)DMA2_2_CURR_X_COUNT +#define pDMA2_2_CURR_Y_COUNT (volatile unsigned short *)DMA2_2_CURR_Y_COUNT +#define pDMA2_2_IRQ_STATUS (volatile unsigned short *)DMA2_2_IRQ_STATUS +#define pDMA2_2_PERIPHERAL_MAP (volatile unsigned short *)DMA2_2_PERIPHERAL_MAP +#define pDMA2_3_CONFIG (volatile unsigned short *)DMA2_3_CONFIG +#define pDMA2_3_NEXT_DESC_PTR (volatile void **)DMA2_3_NEXT_DESC_PTR +#define pDMA2_3_START_ADDR (volatile void **)DMA2_3_START_ADDR +#define pDMA2_3_X_COUNT (volatile unsigned short *)DMA2_3_X_COUNT +#define pDMA2_3_Y_COUNT (volatile unsigned short *)DMA2_3_Y_COUNT +#define pDMA2_3_X_MODIFY (volatile signed short *)DMA2_3_X_MODIFY +#define pDMA2_3_Y_MODIFY (volatile signed short *)DMA2_3_Y_MODIFY +#define pDMA2_3_CURR_DESC_PTR (volatile void **)DMA2_3_CURR_DESC_PTR +#define pDMA2_3_CURR_ADDR (volatile void **)DMA2_3_CURR_ADDR +#define pDMA2_3_CURR_X_COUNT (volatile unsigned short *)DMA2_3_CURR_X_COUNT +#define pDMA2_3_CURR_Y_COUNT (volatile unsigned short *)DMA2_3_CURR_Y_COUNT +#define pDMA2_3_IRQ_STATUS (volatile unsigned short *)DMA2_3_IRQ_STATUS +#define pDMA2_3_PERIPHERAL_MAP (volatile unsigned short *)DMA2_3_PERIPHERAL_MAP +#define pDMA2_4_CONFIG (volatile unsigned short *)DMA2_4_CONFIG +#define pDMA2_4_NEXT_DESC_PTR (volatile void **)DMA2_4_NEXT_DESC_PTR +#define pDMA2_4_START_ADDR (volatile void **)DMA2_4_START_ADDR +#define pDMA2_4_X_COUNT (volatile unsigned short *)DMA2_4_X_COUNT +#define pDMA2_4_Y_COUNT (volatile unsigned short *)DMA2_4_Y_COUNT +#define pDMA2_4_X_MODIFY (volatile signed short *)DMA2_4_X_MODIFY +#define pDMA2_4_Y_MODIFY (volatile signed short *)DMA2_4_Y_MODIFY +#define pDMA2_4_CURR_DESC_PTR (volatile void **)DMA2_4_CURR_DESC_PTR +#define pDMA2_4_CURR_ADDR (volatile void **)DMA2_4_CURR_ADDR +#define pDMA2_4_CURR_X_COUNT (volatile unsigned short *)DMA2_4_CURR_X_COUNT +#define pDMA2_4_CURR_Y_COUNT (volatile unsigned short *)DMA2_4_CURR_Y_COUNT +#define pDMA2_4_IRQ_STATUS (volatile unsigned short *)DMA2_4_IRQ_STATUS +#define pDMA2_4_PERIPHERAL_MAP (volatile unsigned short *)DMA2_4_PERIPHERAL_MAP +#define pDMA2_5_CONFIG (volatile unsigned short *)DMA2_5_CONFIG +#define pDMA2_5_NEXT_DESC_PTR (volatile void **)DMA2_5_NEXT_DESC_PTR +#define pDMA2_5_START_ADDR (volatile void **)DMA2_5_START_ADDR +#define pDMA2_5_X_COUNT (volatile unsigned short *)DMA2_5_X_COUNT +#define pDMA2_5_Y_COUNT (volatile unsigned short *)DMA2_5_Y_COUNT +#define pDMA2_5_X_MODIFY (volatile signed short *)DMA2_5_X_MODIFY +#define pDMA2_5_Y_MODIFY (volatile signed short *)DMA2_5_Y_MODIFY +#define pDMA2_5_CURR_DESC_PTR (volatile void **)DMA2_5_CURR_DESC_PTR +#define pDMA2_5_CURR_ADDR (volatile void **)DMA2_5_CURR_ADDR +#define pDMA2_5_CURR_X_COUNT (volatile unsigned short *)DMA2_5_CURR_X_COUNT +#define pDMA2_5_CURR_Y_COUNT (volatile unsigned short *)DMA2_5_CURR_Y_COUNT +#define pDMA2_5_IRQ_STATUS (volatile unsigned short *)DMA2_5_IRQ_STATUS +#define pDMA2_5_PERIPHERAL_MAP (volatile unsigned short *)DMA2_5_PERIPHERAL_MAP +#define pDMA2_6_CONFIG (volatile unsigned short *)DMA2_6_CONFIG +#define pDMA2_6_NEXT_DESC_PTR (volatile void **)DMA2_6_NEXT_DESC_PTR +#define pDMA2_6_START_ADDR (volatile void **)DMA2_6_START_ADDR +#define pDMA2_6_X_COUNT (volatile unsigned short *)DMA2_6_X_COUNT +#define pDMA2_6_Y_COUNT (volatile unsigned short *)DMA2_6_Y_COUNT +#define pDMA2_6_X_MODIFY (volatile signed short *)DMA2_6_X_MODIFY +#define pDMA2_6_Y_MODIFY (volatile signed short *)DMA2_6_Y_MODIFY +#define pDMA2_6_CURR_DESC_PTR (volatile void **)DMA2_6_CURR_DESC_PTR +#define pDMA2_6_CURR_ADDR (volatile void **)DMA2_6_CURR_ADDR +#define pDMA2_6_CURR_X_COUNT (volatile unsigned short *)DMA2_6_CURR_X_COUNT +#define pDMA2_6_CURR_Y_COUNT (volatile unsigned short *)DMA2_6_CURR_Y_COUNT +#define pDMA2_6_IRQ_STATUS (volatile unsigned short *)DMA2_6_IRQ_STATUS +#define pDMA2_6_PERIPHERAL_MAP (volatile unsigned short *)DMA2_6_PERIPHERAL_MAP +#define pDMA2_7_CONFIG (volatile unsigned short *)DMA2_7_CONFIG +#define pDMA2_7_NEXT_DESC_PTR (volatile void **)DMA2_7_NEXT_DESC_PTR +#define pDMA2_7_START_ADDR (volatile void **)DMA2_7_START_ADDR +#define pDMA2_7_X_COUNT (volatile unsigned short *)DMA2_7_X_COUNT +#define pDMA2_7_Y_COUNT (volatile unsigned short *)DMA2_7_Y_COUNT +#define pDMA2_7_X_MODIFY (volatile signed short *)DMA2_7_X_MODIFY +#define pDMA2_7_Y_MODIFY (volatile signed short *)DMA2_7_Y_MODIFY +#define pDMA2_7_CURR_DESC_PTR (volatile void **)DMA2_7_CURR_DESC_PTR +#define pDMA2_7_CURR_ADDR (volatile void **)DMA2_7_CURR_ADDR +#define pDMA2_7_CURR_X_COUNT (volatile unsigned short *)DMA2_7_CURR_X_COUNT +#define pDMA2_7_CURR_Y_COUNT (volatile unsigned short *)DMA2_7_CURR_Y_COUNT +#define pDMA2_7_IRQ_STATUS (volatile unsigned short *)DMA2_7_IRQ_STATUS +#define pDMA2_7_PERIPHERAL_MAP (volatile unsigned short *)DMA2_7_PERIPHERAL_MAP +#define pDMA2_8_CONFIG (volatile unsigned short *)DMA2_8_CONFIG +#define pDMA2_8_NEXT_DESC_PTR (volatile void **)DMA2_8_NEXT_DESC_PTR +#define pDMA2_8_START_ADDR (volatile void **)DMA2_8_START_ADDR +#define pDMA2_8_X_COUNT (volatile unsigned short *)DMA2_8_X_COUNT +#define pDMA2_8_Y_COUNT (volatile unsigned short *)DMA2_8_Y_COUNT +#define pDMA2_8_X_MODIFY (volatile signed short *)DMA2_8_X_MODIFY +#define pDMA2_8_Y_MODIFY (volatile signed short *)DMA2_8_Y_MODIFY +#define pDMA2_8_CURR_DESC_PTR (volatile void **)DMA2_8_CURR_DESC_PTR +#define pDMA2_8_CURR_ADDR (volatile void **)DMA2_8_CURR_ADDR +#define pDMA2_8_CURR_X_COUNT (volatile unsigned short *)DMA2_8_CURR_X_COUNT +#define pDMA2_8_CURR_Y_COUNT (volatile unsigned short *)DMA2_8_CURR_Y_COUNT +#define pDMA2_8_IRQ_STATUS (volatile unsigned short *)DMA2_8_IRQ_STATUS +#define pDMA2_8_PERIPHERAL_MAP (volatile unsigned short *)DMA2_8_PERIPHERAL_MAP +#define pDMA2_9_CONFIG (volatile unsigned short *)DMA2_9_CONFIG +#define pDMA2_9_NEXT_DESC_PTR (volatile void **)DMA2_9_NEXT_DESC_PTR +#define pDMA2_9_START_ADDR (volatile void **)DMA2_9_START_ADDR +#define pDMA2_9_X_COUNT (volatile unsigned short *)DMA2_9_X_COUNT +#define pDMA2_9_Y_COUNT (volatile unsigned short *)DMA2_9_Y_COUNT +#define pDMA2_9_X_MODIFY (volatile signed short *)DMA2_9_X_MODIFY +#define pDMA2_9_Y_MODIFY (volatile signed short *)DMA2_9_Y_MODIFY +#define pDMA2_9_CURR_DESC_PTR (volatile void **)DMA2_9_CURR_DESC_PTR +#define pDMA2_9_CURR_ADDR (volatile void **)DMA2_9_CURR_ADDR +#define pDMA2_9_CURR_X_COUNT (volatile unsigned short *)DMA2_9_CURR_X_COUNT +#define pDMA2_9_CURR_Y_COUNT (volatile unsigned short *)DMA2_9_CURR_Y_COUNT +#define pDMA2_9_IRQ_STATUS (volatile unsigned short *)DMA2_9_IRQ_STATUS +#define pDMA2_9_PERIPHERAL_MAP (volatile unsigned short *)DMA2_9_PERIPHERAL_MAP +#define pDMA2_10_CONFIG (volatile unsigned short *)DMA2_10_CONFIG +#define pDMA2_10_NEXT_DESC_PTR (volatile void **)DMA2_10_NEXT_DESC_PTR +#define pDMA2_10_START_ADDR (volatile void **)DMA2_10_START_ADDR +#define pDMA2_10_X_COUNT (volatile unsigned short *)DMA2_10_X_COUNT +#define pDMA2_10_Y_COUNT (volatile unsigned short *)DMA2_10_Y_COUNT +#define pDMA2_10_X_MODIFY (volatile signed short *)DMA2_10_X_MODIFY +#define pDMA2_10_Y_MODIFY (volatile signed short *)DMA2_10_Y_MODIFY +#define pDMA2_10_CURR_DESC_PTR (volatile void **)DMA2_10_CURR_DESC_PTR +#define pDMA2_10_CURR_ADDR (volatile void **)DMA2_10_CURR_ADDR +#define pDMA2_10_CURR_X_COUNT (volatile unsigned short *)DMA2_10_CURR_X_COUNT +#define pDMA2_10_CURR_Y_COUNT (volatile unsigned short *)DMA2_10_CURR_Y_COUNT +#define pDMA2_10_IRQ_STATUS (volatile unsigned short *)DMA2_10_IRQ_STATUS +#define pDMA2_10_PERIPHERAL_MAP (volatile unsigned short *)DMA2_10_PERIPHERAL_MAP +#define pDMA2_11_CONFIG (volatile unsigned short *)DMA2_11_CONFIG +#define pDMA2_11_NEXT_DESC_PTR (volatile void **)DMA2_11_NEXT_DESC_PTR +#define pDMA2_11_START_ADDR (volatile void **)DMA2_11_START_ADDR +#define pDMA2_11_X_COUNT (volatile unsigned short *)DMA2_11_X_COUNT +#define pDMA2_11_Y_COUNT (volatile unsigned short *)DMA2_11_Y_COUNT +#define pDMA2_11_X_MODIFY (volatile signed short *)DMA2_11_X_MODIFY +#define pDMA2_11_Y_MODIFY (volatile signed short *)DMA2_11_Y_MODIFY +#define pDMA2_11_CURR_DESC_PTR (volatile void **)DMA2_11_CURR_DESC_PTR +#define pDMA2_11_CURR_ADDR (volatile void **)DMA2_11_CURR_ADDR +#define pDMA2_11_CURR_X_COUNT (volatile unsigned short *)DMA2_11_CURR_X_COUNT +#define pDMA2_11_CURR_Y_COUNT (volatile unsigned short *)DMA2_11_CURR_Y_COUNT +#define pDMA2_11_IRQ_STATUS (volatile unsigned short *)DMA2_11_IRQ_STATUS +#define pDMA2_11_PERIPHERAL_MAP (volatile unsigned short *)DMA2_11_PERIPHERAL_MAP + +/* Memory DMA2 Controller registers (0xFFC0 0E80-0xFFC0 0FFF) */ +#define pMDMA2_D0_CONFIG (volatile unsigned short *)MDMA2_D0_CONFIG +#define pMDMA2_D0_NEXT_DESC_PTR (volatile void **)MDMA2_D0_NEXT_DESC_PTR +#define pMDMA2_D0_START_ADDR (volatile void **)MDMA2_D0_START_ADDR +#define pMDMA2_D0_X_COUNT (volatile unsigned short *)MDMA2_D0_X_COUNT +#define pMDMA2_D0_Y_COUNT (volatile unsigned short *)MDMA2_D0_Y_COUNT +#define pMDMA2_D0_X_MODIFY (volatile signed short *)MDMA2_D0_X_MODIFY +#define pMDMA2_D0_Y_MODIFY (volatile signed short *)MDMA2_D0_Y_MODIFY +#define pMDMA2_D0_CURR_DESC_PTR (volatile void **)MDMA2_D0_CURR_DESC_PTR +#define pMDMA2_D0_CURR_ADDR (volatile void **)MDMA2_D0_CURR_ADDR +#define pMDMA2_D0_CURR_X_COUNT (volatile unsigned short *)MDMA2_D0_CURR_X_COUNT +#define pMDMA2_D0_CURR_Y_COUNT (volatile unsigned short *)MDMA2_D0_CURR_Y_COUNT +#define pMDMA2_D0_IRQ_STATUS (volatile unsigned short *)MDMA2_D0_IRQ_STATUS +#define pMDMA2_D0_PERIPHERAL_MAP (volatile unsigned short *)MDMA2_D0_PERIPHERAL_MAP +#define pMDMA2_S0_CONFIG (volatile unsigned short *)MDMA2_S0_CONFIG +#define pMDMA2_S0_NEXT_DESC_PTR (volatile void **)MDMA2_S0_NEXT_DESC_PTR +#define pMDMA2_S0_START_ADDR (volatile void **)MDMA2_S0_START_ADDR +#define pMDMA2_S0_X_COUNT (volatile unsigned short *)MDMA2_S0_X_COUNT +#define pMDMA2_S0_Y_COUNT (volatile unsigned short *)MDMA2_S0_Y_COUNT +#define pMDMA2_S0_X_MODIFY (volatile signed short *)MDMA2_S0_X_MODIFY +#define pMDMA2_S0_Y_MODIFY (volatile signed short *)MDMA2_S0_Y_MODIFY +#define pMDMA2_S0_CURR_DESC_PTR (volatile void **)MDMA2_S0_CURR_DESC_PTR +#define pMDMA2_S0_CURR_ADDR (volatile void **)MDMA2_S0_CURR_ADDR +#define pMDMA2_S0_CURR_X_COUNT (volatile unsigned short *)MDMA2_S0_CURR_X_COUNT +#define pMDMA2_S0_CURR_Y_COUNT (volatile unsigned short *)MDMA2_S0_CURR_Y_COUNT +#define pMDMA2_S0_IRQ_STATUS (volatile unsigned short *)MDMA2_S0_IRQ_STATUS +#define pMDMA2_S0_PERIPHERAL_MAP (volatile unsigned short *)MDMA2_S0_PERIPHERAL_MAP +#define pMDMA2_D1_CONFIG (volatile unsigned short *)MDMA2_D1_CONFIG +#define pMDMA2_D1_NEXT_DESC_PTR (volatile void **)MDMA2_D1_NEXT_DESC_PTR +#define pMDMA2_D1_START_ADDR (volatile void **)MDMA2_D1_START_ADDR +#define pMDMA2_D1_X_COUNT (volatile unsigned short *)MDMA2_D1_X_COUNT +#define pMDMA2_D1_Y_COUNT (volatile unsigned short *)MDMA2_D1_Y_COUNT +#define pMDMA2_D1_X_MODIFY (volatile signed short *)MDMA2_D1_X_MODIFY +#define pMDMA2_D1_Y_MODIFY (volatile signed short *)MDMA2_D1_Y_MODIFY +#define pMDMA2_D1_CURR_DESC_PTR (volatile void **)MDMA2_D1_CURR_DESC_PTR +#define pMDMA2_D1_CURR_ADDR (volatile void **)MDMA2_D1_CURR_ADDR +#define pMDMA2_D1_CURR_X_COUNT (volatile unsigned short *)MDMA2_D1_CURR_X_COUNT +#define pMDMA2_D1_CURR_Y_COUNT (volatile unsigned short *)MDMA2_D1_CURR_Y_COUNT +#define pMDMA2_D1_IRQ_STATUS (volatile unsigned short *)MDMA2_D1_IRQ_STATUS +#define pMDMA2_D1_PERIPHERAL_MAP (volatile unsigned short *)MDMA2_D1_PERIPHERAL_MAP +#define pMDMA2_S1_CONFIG (volatile unsigned short *)MDMA2_S1_CONFIG +#define pMDMA2_S1_NEXT_DESC_PTR (volatile void **)MDMA2_S1_NEXT_DESC_PTR +#define pMDMA2_S1_START_ADDR (volatile void **)MDMA2_S1_START_ADDR +#define pMDMA2_S1_X_COUNT (volatile unsigned short *)MDMA2_S1_X_COUNT +#define pMDMA2_S1_Y_COUNT (volatile unsigned short *)MDMA2_S1_Y_COUNT +#define pMDMA2_S1_X_MODIFY (volatile signed short *)MDMA2_S1_X_MODIFY +#define pMDMA2_S1_Y_MODIFY (volatile signed short *)MDMA2_S1_Y_MODIFY +#define pMDMA2_S1_CURR_DESC_PTR (volatile void **)MDMA2_S1_CURR_DESC_PTR +#define pMDMA2_S1_CURR_ADDR (volatile void **)MDMA2_S1_CURR_ADDR +#define pMDMA2_S1_CURR_X_COUNT (volatile unsigned short *)MDMA2_S1_CURR_X_COUNT +#define pMDMA2_S1_CURR_Y_COUNT (volatile unsigned short *)MDMA2_S1_CURR_Y_COUNT +#define pMDMA2_S1_IRQ_STATUS (volatile unsigned short *)MDMA2_S1_IRQ_STATUS +#define pMDMA2_S1_PERIPHERAL_MAP (volatile unsigned short *)MDMA2_S1_PERIPHERAL_MAP + +/* Internal Memory DMA Registers (0xFFC0_1800 - 0xFFC0_19FF) */ +#define pIMDMA_D0_CONFIG (volatile unsigned short *)IMDMA_D0_CONFIG +#define pIMDMA_D0_NEXT_DESC_PTR (volatile void **)IMDMA_D0_NEXT_DESC_PTR +#define pIMDMA_D0_START_ADDR (volatile void **)IMDMA_D0_START_ADDR +#define pIMDMA_D0_X_COUNT (volatile unsigned short *)IMDMA_D0_X_COUNT +#define pIMDMA_D0_Y_COUNT (volatile unsigned short *)IMDMA_D0_Y_COUNT +#define pIMDMA_D0_X_MODIFY (volatile signed short *)IMDMA_D0_X_MODIFY +#define pIMDMA_D0_Y_MODIFY (volatile signed short *)IMDMA_D0_Y_MODIFY +#define pIMDMA_D0_CURR_DESC_PTR (volatile void **)IMDMA_D0_CURR_DESC_PTR +#define pIMDMA_D0_CURR_ADDR (volatile void **)IMDMA_D0_CURR_ADDR +#define pIMDMA_D0_CURR_X_COUNT (volatile unsigned short *)IMDMA_D0_CURR_X_COUNT +#define pIMDMA_D0_CURR_Y_COUNT (volatile unsigned short *)IMDMA_D0_CURR_Y_COUNT +#define pIMDMA_D0_IRQ_STATUS (volatile unsigned short *)IMDMA_D0_IRQ_STATUS +#define pIMDMA_S0_CONFIG (volatile unsigned short *)IMDMA_S0_CONFIG +#define pIMDMA_S0_NEXT_DESC_PTR (volatile void **)IMDMA_S0_NEXT_DESC_PTR +#define pIMDMA_S0_START_ADDR (volatile void **)IMDMA_S0_START_ADDR +#define pIMDMA_S0_X_COUNT (volatile unsigned short *)IMDMA_S0_X_COUNT +#define pIMDMA_S0_Y_COUNT (volatile unsigned short *)IMDMA_S0_Y_COUNT +#define pIMDMA_S0_X_MODIFY (volatile signed short *)IMDMA_S0_X_MODIFY +#define pIMDMA_S0_Y_MODIFY (volatile signed short *)IMDMA_S0_Y_MODIFY +#define pIMDMA_S0_CURR_DESC_PTR (volatile void **)IMDMA_S0_CURR_DESC_PTR +#define pIMDMA_S0_CURR_ADDR (volatile void **)IMDMA_S0_CURR_ADDR +#define pIMDMA_S0_CURR_X_COUNT (volatile unsigned short *)IMDMA_S0_CURR_X_COUNT +#define pIMDMA_S0_CURR_Y_COUNT (volatile unsigned short *)IMDMA_S0_CURR_Y_COUNT +#define pIMDMA_S0_IRQ_STATUS (volatile unsigned short *)IMDMA_S0_IRQ_STATUS +#define pIMDMA_D1_CONFIG (volatile unsigned short *)IMDMA_D1_CONFIG +#define pIMDMA_D1_NEXT_DESC_PTR (volatile void **)IMDMA_D1_NEXT_DESC_PTR +#define pIMDMA_D1_START_ADDR (volatile void **)IMDMA_D1_START_ADDR +#define pIMDMA_D1_X_COUNT (volatile unsigned short *)IMDMA_D1_X_COUNT +#define pIMDMA_D1_Y_COUNT (volatile unsigned short *)IMDMA_D1_Y_COUNT +#define pIMDMA_D1_X_MODIFY (volatile signed short *)IMDMA_D1_X_MODIFY +#define pIMDMA_D1_Y_MODIFY (volatile signed short *)IMDMA_D1_Y_MODIFY +#define pIMDMA_D1_CURR_DESC_PTR (volatile void **)IMDMA_D1_CURR_DESC_PTR +#define pIMDMA_D1_CURR_ADDR (volatile void **)IMDMA_D1_CURR_ADDR +#define pIMDMA_D1_CURR_X_COUNT (volatile unsigned short *)IMDMA_D1_CURR_X_COUNT +#define pIMDMA_D1_CURR_Y_COUNT (volatile unsigned short *)IMDMA_D1_CURR_Y_COUNT +#define pIMDMA_D1_IRQ_STATUS (volatile unsigned short *)IMDMA_D1_IRQ_STATUS +#define pIMDMA_S1_CONFIG (volatile unsigned short *)IMDMA_S1_CONFIG +#define pIMDMA_S1_NEXT_DESC_PTR (volatile void **)IMDMA_S1_NEXT_DESC_PTR +#define pIMDMA_S1_START_ADDR (volatile void **)IMDMA_S1_START_ADDR +#define pIMDMA_S1_X_COUNT (volatile unsigned short *)IMDMA_S1_X_COUNT +#define pIMDMA_S1_Y_COUNT (volatile unsigned short *)IMDMA_S1_Y_COUNT +#define pIMDMA_S1_X_MODIFY (volatile signed short *)IMDMA_S1_X_MODIFY +#define pIMDMA_S1_Y_MODIFY (volatile signed short *)IMDMA_S1_Y_MODIFY +#define pIMDMA_S1_CURR_DESC_PTR (volatile void **)IMDMA_S1_CURR_DESC_PTR +#define pIMDMA_S1_CURR_ADDR (volatile void **)IMDMA_S1_CURR_ADDR +#define pIMDMA_S1_CURR_X_COUNT (volatile unsigned short *)IMDMA_S1_CURR_X_COUNT +#define pIMDMA_S1_CURR_Y_COUNT (volatile unsigned short *)IMDMA_S1_CURR_Y_COUNT +#define pIMDMA_S1_IRQ_STATUS (volatile unsigned short *)IMDMA_S1_IRQ_STATUS + +/* + * System Reset and Interrupt Controller registers for + * core A (0xFFC0 0100-0xFFC0 01FF) + */ +#define pSWRST (volatile unsigned short *)SICA_SWRST +#define pSYSCR (volatile unsigned short *)SICA_SYSCR +#define pRVECT (volatile unsigned short *)SICA_RVECT +#define pSIC_SWRST (volatile unsigned short *)SICA_SWRST +#define pSIC_SYSCR (volatile unsigned short *)SICA_SYSCR +#define pSIC_RVECT (volatile unsigned short *)SICA_RVECT +#define pSIC_IMASK (volatile unsigned long *)SICA_IMASK +#define pSIC_IAR0 ((volatile unsigned long *)SICA_IAR0) +#define pSIC_IAR1 (volatile unsigned long *)SICA_IAR1 +#define pSIC_IAR2 (volatile unsigned long *)SICA_IAR2 +#define pSIC_ISR (volatile unsigned long *)SICA_ISR0 +#define pSIC_IWR (volatile unsigned long *)SICA_IWR0 + +/* Watchdog Timer registers for Core A (0xFFC0 0200-0xFFC0 02FF) */ +#define pWDOG_CTL (volatile unsigned short *)WDOGA_CTL +#define pWDOG_CNT (volatile unsigned long *)WDOGA_CNT +#define pWDOG_STAT (volatile unsigned long *)WDOGA_STAT + +/* Programmable Flag 0 registers (0xFFC0 0700-0xFFC0 07FF) */ +#define pFIO_FLAG_D (volatile unsigned short *)FIO0_FLAG_D +#define pFIO_FLAG_C (volatile unsigned short *)FIO0_FLAG_C +#define pFIO_FLAG_S (volatile unsigned short *)FIO0_FLAG_S +#define pFIO_FLAG_T (volatile unsigned short *)FIO0_FLAG_T +#define pFIO_MASKA_D (volatile unsigned short *)FIO0_MASKA_D +#define pFIO_MASKA_C (volatile unsigned short *)FIO0_MASKA_C +#define pFIO_MASKA_S (volatile unsigned short *)FIO0_MASKA_S +#define pFIO_MASKA_T (volatile unsigned short *)FIO0_MASKA_T +#define pFIO_MASKB_D (volatile unsigned short *)FIO0_MASKB_D +#define pFIO_MASKB_C (volatile unsigned short *)FIO0_MASKB_C +#define pFIO_MASKB_S (volatile unsigned short *)FIO0_MASKB_S +#define pFIO_MASKB_T (volatile unsigned short *)FIO0_MASKB_T +#define pFIO_DIR (volatile unsigned short *)FIO0_DIR +#define pFIO_POLAR (volatile unsigned short *)FIO0_POLAR +#define pFIO_EDGE (volatile unsigned short *)FIO0_EDGE +#define pFIO_BOTH (volatile unsigned short *)FIO0_BOTH +#define pFIO_INEN (volatile unsigned short *)FIO0_INEN + +/* Parallel Peripheral Interface (PPI) 0 registers (0xFFC0 1000-0xFFC0 10FF)*/ +#define pPPI_CONTROL (volatile unsigned short *)PPI0_CONTROL +#define pPPI_STATUS (volatile unsigned short *)PPI0_STATUS +#define pPPI_COUNT (volatile unsigned short *)PPI0_COUNT +#define pPPI_DELAY (volatile unsigned short *)PPI0_DELAY +#define pPPI_FRAME (volatile unsigned short *)PPI0_FRAME + +/* DMA1 Controller registers (0xFFC0 1C00-0xFFC0 1FFF) */ +#define pDMA0_CONFIG (volatile unsigned short *)DMA1_0_CONFIG +#define pDMA0_NEXT_DESC_PTR (volatile void **)DMA1_0_NEXT_DESC_PTR +#define pDMA0_START_ADDR (volatile void **)DMA1_0_START_ADDR +#define pDMA0_X_COUNT (volatile unsigned short *)DMA1_0_X_COUNT +#define pDMA0_Y_COUNT (volatile unsigned short *)DMA1_0_Y_COUNT +#define pDMA0_X_MODIFY (volatile unsigned short *)DMA1_0_X_MODIFY +#define pDMA0_Y_MODIFY (volatile unsigned short *)DMA1_0_Y_MODIFY +#define pDMA0_CURR_DESC_PTR (volatile void **)DMA1_0_CURR_DESC_PTR +#define pDMA0_CURR_ADDR (volatile void **)DMA1_0_CURR_ADDR +#define pDMA0_CURR_X_COUNT (volatile unsigned short *)DMA1_0_CURR_X_COUNT +#define pDMA0_CURR_Y_COUNT (volatile unsigned short *)DMA1_0_CURR_Y_COUNT +#define pDMA0_IRQ_STATUS (volatile unsigned short *)DMA1_0_IRQ_STATUS +#define pDMA0_PERIPHERAL_MAP (volatile unsigned short *)DMA1_0_PERIPHERAL_MAP + +/* Memory DMA1 Controller registers (0xFFC0 1E80-0xFFC0 1FFF) */ +#define pMDMA_D0_CONFIG (volatile unsigned short *)MDMA1_D0_CONFIG +#define pMDMA_D0_NEXT_DESC_PTR (volatile void **)MDMA1_D0_NEXT_DESC_PTR +#define pMDMA_D0_START_ADDR (volatile void **)MDMA1_D0_START_ADDR +#define pMDMA_D0_X_COUNT (volatile unsigned short *)MDMA1_D0_X_COUNT +#define pMDMA_D0_Y_COUNT (volatile unsigned short *)MDMA1_D0_Y_COUNT +#define pMDMA_D0_X_MODIFY (volatile unsigned short *)MDMA1_D0_X_MODIFY +#define pMDMA_D0_Y_MODIFY (volatile unsigned short *)MDMA1_D0_Y_MODIFY +#define pMDMA_D0_CURR_DESC_PTR (volatile void **)MDMA1_D0_CURR_DESC_PTR +#define pMDMA_D0_CURR_ADDR (volatile void **)MDMA1_D0_CURR_ADDR +#define pMDMA_D0_CURR_X_COUNT (volatile unsigned short *)MDMA1_D0_CURR_X_COUNT +#define pMDMA_D0_CURR_Y_COUNT (volatile unsigned short *)MDMA1_D0_CURR_Y_COUNT +#define pMDMA_D0_IRQ_STATUS (volatile unsigned short *)MDMA1_D0_IRQ_STATUS +#define pMDMA_D0_PERIPHERAL_MAP (volatile unsigned short *)MDMA1_D0_PERIPHERAL_MAP +#define pMDMA_S0_CONFIG (volatile unsigned short *)MDMA1_S0_CONFIG +#define pMDMA_S0_NEXT_DESC_PTR (volatile void **)MDMA1_S0_NEXT_DESC_PTR +#define pMDMA_S0_START_ADDR (volatile void **)MDMA1_S0_START_ADDR +#define pMDMA_S0_X_COUNT (volatile unsigned short *)MDMA1_S0_X_COUNT +#define pMDMA_S0_Y_COUNT (volatile unsigned short *)MDMA1_S0_Y_COUNT +#define pMDMA_S0_X_MODIFY (volatile unsigned short *)MDMA1_S0_X_MODIFY +#define pMDMA_S0_Y_MODIFY (volatile unsigned short *)MDMA1_S0_Y_MODIFY +#define pMDMA_S0_CURR_DESC_PTR (volatile void **)MDMA1_S0_CURR_DESC_PTR +#define pMDMA_S0_CURR_ADDR (volatile void **)MDMA1_S0_CURR_ADDR +#define pMDMA_S0_CURR_X_COUNT (volatile unsigned short *)MDMA1_S0_CURR_X_COUNT +#define pMDMA_S0_CURR_Y_COUNT (volatile unsigned short *)MDMA1_S0_CURR_Y_COUNT +#define pMDMA_S0_IRQ_STATUS (volatile unsigned short *)MDMA1_S0_IRQ_STATUS +#define pMDMA_S0_PERIPHERAL_MAP (volatile unsigned short *)MDMA1_S0_PERIPHERAL_MAP +#define pMDMA_D1_CONFIG (volatile unsigned short *)MDMA1_D1_CONFIG +#define pMDMA_D1_NEXT_DESC_PTR (volatile void **)MDMA1_D1_NEXT_DESC_PTR +#define pMDMA_D1_START_ADDR (volatile void **)MDMA1_D1_START_ADDR +#define pMDMA_D1_X_COUNT (volatile unsigned short *)MDMA1_D1_X_COUNT +#define pMDMA_D1_Y_COUNT (volatile unsigned short *)MDMA1_D1_Y_COUNT +#define pMDMA_D1_X_MODIFY (volatile unsigned short *)MDMA1_D1_X_MODIFY +#define pMDMA_D1_Y_MODIFY (volatile unsigned short *)MDMA1_D1_Y_MODIFY +#define pMDMA_D1_CURR_DESC_PTR (volatile void **)MDMA1_D1_CURR_DESC_PTR +#define pMDMA_D1_CURR_ADDR (volatile void **)MDMA1_D1_CURR_ADDR +#define pMDMA_D1_CURR_X_COUNT (volatile unsigned short *)MDMA1_D1_CURR_X_COUNT +#define pMDMA_D1_CURR_Y_COUNT (volatile unsigned short *)MDMA1_D1_CURR_Y_COUNT +#define pMDMA_D1_IRQ_STATUS (volatile unsigned short *)MDMA1_D1_IRQ_STATUS +#define pMDMA_D1_PERIPHERAL_MAP (volatile unsigned short *)MDMA1_D1_PERIPHERAL_MAP +#define pMDMA_S1_CONFIG (volatile unsigned short *)MDMA1_S1_CONFIG +#define pMDMA_S1_NEXT_DESC_PTR (volatile void **)MDMA1_S1_NEXT_DESC_PTR +#define pMDMA_S1_START_ADDR (volatile void **)MDMA1_S1_START_ADDR +#define pMDMA_S1_X_COUNT (volatile unsigned short *)MDMA1_S1_X_COUNT +#define pMDMA_S1_Y_COUNT (volatile unsigned short *)MDMA1_S1_Y_COUNT +#define pMDMA_S1_X_MODIFY (volatile unsigned short *)MDMA1_S1_X_MODIFY +#define pMDMA_S1_Y_MODIFY (volatile unsigned short *)MDMA1_S1_Y_MODIFY +#define pMDMA_S1_CURR_DESC_PTR (volatile void **)MDMA1_S1_CURR_DESC_PTR +#define pMDMA_S1_CURR_ADDR (volatile void **)MDMA1_S1_CURR_ADDR +#define pMDMA_S1_CURR_X_COUNT (volatile unsigned short *)MDMA1_S1_CURR_X_COUNT +#define pMDMA_S1_CURR_Y_COUNT (volatile unsigned short *)MDMA1_S1_CURR_Y_COUNT +#define pMDMA_S1_IRQ_STATUS (volatile unsigned short *)MDMA1_S1_IRQ_STATUS +#define pMDMA_S1_PERIPHERAL_MAP (volatile unsigned short *)MDMA1_S1_PERIPHERAL_MAP + +/* DMA2 Controller registers (0xFFC0 0C00-0xFFC0 0DFF) */ +#define pDMA1_CONFIG (volatile unsigned short *)DMA2_0_CONFIG +#define pDMA1_NEXT_DESC_PTR (volatile void **)DMA2_0_NEXT_DESC_PTR +#define pDMA1_START_ADDR (volatile void **)DMA2_0_START_ADDR +#define pDMA1_X_COUNT (volatile unsigned short *)DMA2_0_X_COUNT +#define pDMA1_Y_COUNT (volatile unsigned short *)DMA2_0_Y_COUNT +#define pDMA1_X_MODIFY (volatile unsigned short *)DMA2_0_X_MODIFY +#define pDMA1_Y_MODIFY (volatile unsigned short *)DMA2_0_Y_MODIFY +#define pDMA1_CURR_DESC_PTR (volatile void **)DMA2_0_CURR_DESC_PTR +#define pDMA1_CURR_ADDR (volatile void **)DMA2_0_CURR_ADDR +#define pDMA1_CURR_X_COUNT (volatile unsigned short *)DMA2_0_CURR_X_COUNT +#define pDMA1_CURR_Y_COUNT (volatile unsigned short *)DMA2_0_CURR_Y_COUNT +#define pDMA1_IRQ_STATUS (volatile unsigned short *)DMA2_0_IRQ_STATUS +#define pDMA1_PERIPHERAL_MAP (volatile unsigned short *)DMA2_0_PERIPHERAL_MAP +#define pDMA2_CONFIG (volatile unsigned short *)DMA2_1_CONFIG +#define pDMA2_NEXT_DESC_PTR (volatile void **)DMA2_1_NEXT_DESC_PTR +#define pDMA2_START_ADDR (volatile void **)DMA2_1_START_ADDR +#define pDMA2_X_COUNT (volatile unsigned short *)DMA2_1_X_COUNT +#define pDMA2_Y_COUNT (volatile unsigned short *)DMA2_1_Y_COUNT +#define pDMA2_X_MODIFY (volatile unsigned short *)DMA2_1_X_MODIFY +#define pDMA2_Y_MODIFY (volatile unsigned short *)DMA2_1_Y_MODIFY +#define pDMA2_CURR_DESC_PTR (volatile void **)DMA2_1_CURR_DESC_PTR +#define pDMA2_CURR_ADDR (volatile void **)DMA2_1_CURR_ADDR +#define pDMA2_CURR_X_COUNT (volatile unsigned short *)DMA2_1_CURR_X_COUNT +#define pDMA2_CURR_Y_COUNT (volatile unsigned short *)DMA2_1_CURR_Y_COUNT +#define pDMA2_IRQ_STATUS (volatile unsigned short *)DMA2_1_IRQ_STATUS +#define pDMA2_PERIPHERAL_MAP (volatile unsigned short *)DMA2_1_PERIPHERAL_MAP +#define pDMA3_CONFIG (volatile unsigned short *)DMA2_2_CONFIG +#define pDMA3_NEXT_DESC_PTR (volatile void **)DMA2_2_NEXT_DESC_PTR +#define pDMA3_START_ADDR (volatile void **)DMA2_2_START_ADDR +#define pDMA3_X_COUNT (volatile unsigned short *)DMA2_2_X_COUNT +#define pDMA3_Y_COUNT (volatile unsigned short *)DMA2_2_Y_COUNT +#define pDMA3_X_MODIFY (volatile unsigned short *)DMA2_2_X_MODIFY +#define pDMA3_Y_MODIFY (volatile unsigned short *)DMA2_2_Y_MODIFY +#define pDMA3_CURR_DESC_PTR (volatile void **)DMA2_2_CURR_DESC_PTR +#define pDMA3_CURR_ADDR (volatile void **)DMA2_2_CURR_ADDR +#define pDMA3_CURR_X_COUNT (volatile unsigned short *)DMA2_2_CURR_X_COUNT +#define pDMA3_CURR_Y_COUNT (volatile unsigned short *)DMA2_2_CURR_Y_COUNT +#define pDMA3_IRQ_STATUS (volatile unsigned short *)DMA2_2_IRQ_STATUS +#define pDMA3_PERIPHERAL_MAP (volatile unsigned short *)DMA2_2_PERIPHERAL_MAP +#define pDMA4_CONFIG (volatile unsigned short *)DMA2_3_CONFIG +#define pDMA4_NEXT_DESC_PTR (volatile void **)DMA2_3_NEXT_DESC_PTR +#define pDMA4_START_ADDR (volatile void **)DMA2_3_START_ADDR +#define pDMA4_X_COUNT (volatile unsigned short *)DMA2_3_X_COUNT +#define pDMA4_Y_COUNT (volatile unsigned short *)DMA2_3_Y_COUNT +#define pDMA4_X_MODIFY (volatile unsigned short *)DMA2_3_X_MODIFY +#define pDMA4_Y_MODIFY (volatile unsigned short *)DMA2_3_Y_MODIFY +#define pDMA4_CURR_DESC_PTR (volatile void **)DMA2_3_CURR_DESC_PTR +#define pDMA4_CURR_ADDR (volatile void **)DMA2_3_CURR_ADDR +#define pDMA4_CURR_X_COUNT (volatile unsigned short *)DMA2_3_CURR_X_COUNT +#define pDMA4_CURR_Y_COUNT (volatile unsigned short *)DMA2_3_CURR_Y_COUNT +#define pDMA4_IRQ_STATUS (volatile unsigned short *)DMA2_3_IRQ_STATUS +#define pDMA4_PERIPHERAL_MAP (volatile unsigned short *)DMA2_3_PERIPHERAL_MAP +#define pDMA5_CONFIG (volatile unsigned short *)DMA2_4_CONFIG +#define pDMA5_NEXT_DESC_PTR (volatile void **)DMA2_4_NEXT_DESC_PTR +#define pDMA5_START_ADDR (volatile void **)DMA2_4_START_ADDR +#define pDMA5_X_COUNT (volatile unsigned short *)DMA2_4_X_COUNT +#define pDMA5_Y_COUNT (volatile unsigned short *)DMA2_4_Y_COUNT +#define pDMA5_X_MODIFY (volatile unsigned short *)DMA2_4_X_MODIFY +#define pDMA5_Y_MODIFY (volatile unsigned short *)DMA2_4_Y_MODIFY +#define pDMA5_CURR_DESC_PTR (volatile void **)DMA2_4_CURR_DESC_PTR +#define pDMA5_CURR_ADDR (volatile void **)DMA2_4_CURR_ADDR +#define pDMA5_CURR_X_COUNT (volatile unsigned short *)DMA2_4_CURR_X_COUNT +#define pDMA5_CURR_Y_COUNT (volatile unsigned short *)DMA2_4_CURR_Y_COUNT +#define pDMA5_IRQ_STATUS (volatile unsigned short *)DMA2_4_IRQ_STATUS +#define pDMA5_PERIPHERAL_MAP (volatile unsigned short *)DMA2_4_PERIPHERAL_MAP +#define pDMA6_CONFIG (volatile unsigned short *)DMA2_5_CONFIG +#define pDMA6_NEXT_DESC_PTR (volatile void **)DMA2_5_NEXT_DESC_PTR +#define pDMA6_START_ADDR (volatile void **)DMA2_5_START_ADDR +#define pDMA6_X_COUNT (volatile unsigned short *)DMA2_5_X_COUNT +#define pDMA6_Y_COUNT (volatile unsigned short *)DMA2_5_Y_COUNT +#define pDMA6_X_MODIFY (volatile unsigned short *)DMA2_5_X_MODIFY +#define pDMA6_Y_MODIFY (volatile unsigned short *)DMA2_5_Y_MODIFY +#define pDMA6_CURR_DESC_PTR (volatile void **)DMA2_5_CURR_DESC_PTR +#define pDMA6_CURR_ADDR (volatile void **)DMA2_5_CURR_ADDR +#define pDMA6_CURR_X_COUNT (volatile unsigned short *)DMA2_5_CURR_X_COUNT +#define pDMA6_CURR_Y_COUNT (volatile unsigned short *)DMA2_5_CURR_Y_COUNT +#define pDMA6_IRQ_STATUS (volatile unsigned short *)DMA2_5_IRQ_STATUS +#define pDMA6_PERIPHERAL_MAP (volatile unsigned short *)DMA2_5_PERIPHERAL_MAP +#define pDMA7_CONFIG (volatile unsigned short *)DMA2_6_CONFIG +#define pDMA7_NEXT_DESC_PTR (volatile void **)DMA2_6_NEXT_DESC_PTR +#define pDMA7_START_ADDR (volatile void **)DMA2_6_START_ADDR +#define pDMA7_X_COUNT (volatile unsigned short *)DMA2_6_X_COUNT +#define pDMA7_Y_COUNT (volatile unsigned short *)DMA2_6_Y_COUNT +#define pDMA7_X_MODIFY (volatile unsigned short *)DMA2_6_X_MODIFY +#define pDMA7_Y_MODIFY (volatile unsigned short *)DMA2_6_Y_MODIFY +#define pDMA7_CURR_DESC_PTR (volatile void **)DMA2_6_CURR_DESC_PTR +#define pDMA7_CURR_ADDR (volatile void **)DMA2_6_CURR_ADDR +#define pDMA7_CURR_X_COUNT (volatile unsigned short *)DMA2_6_CURR_X_COUNT +#define pDMA7_CURR_Y_COUNT (volatile unsigned short *)DMA2_6_CURR_Y_COUNT +#define pDMA7_IRQ_STATUS (volatile unsigned short *)DMA2_6_IRQ_STATUS +#define pDMA7_PERIPHERAL_MAP (volatile unsigned short *)DMA2_6_PERIPHERAL_MAP + +#endif /* _CDEF_BF561_H */ diff --git a/include/asm-blackfin/arch-bf561/defBF561.h b/include/asm-blackfin/arch-bf561/defBF561.h new file mode 100644 index 0000000..c6e3de5 --- /dev/null +++ b/include/asm-blackfin/arch-bf561/defBF561.h @@ -0,0 +1,1941 @@ +/* + * defBF561.h + * + * (c) Copyright 2001-2003 Analog Devices, Inc. All rights reserved. + * + */ + +/* SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561 */ + +#ifndef _DEF_BF561_H +#define _DEF_BF561_H + +/* + * #if !defined(__ADSPBF561__) + * #warning defBF561.h should only be included for BF561 chip. + * #endif + */ + +/* include all Core registers and bit definitions */ +#include <asm/arch-common/def_LPBlackfin.h> + +/* + * Helper macros + * usage: + * P0.H = HI(UART_THR); + * P0.L = LO(UART_THR); + */ + +#define LO(con32) ((con32) & 0xFFFF) +#define lo(con32) ((con32) & 0xFFFF) +#define HI(con32) (((con32) >> 16) & 0xFFFF) +#define hi(con32) (((con32) >> 16) & 0xFFFF) + +/* + * System MMR Register Map + */ + +/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */ +#define PLL_CTL 0xFFC00000 /* PLL Control register */ +#define PLL_DIV 0xFFC00004 /* PLL Divide Register */ +#define VR_CTL 0xFFC00008 /* Voltage Regulator Control Register */ +#define PLL_STAT 0xFFC0000C /* PLL Status register */ +#define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count register */ + +/* + * System Reset and Interrupt Controller registers for + * core A (0xFFC0 0100-0xFFC0 01FF) + */ +#define SICA_SWRST 0xFFC00100 /* Software Reset register */ +#define SICA_SYSCR 0xFFC00104 /* System Reset Configuration register */ +#define SICA_RVECT 0xFFC00108 /* SIC Reset Vector Address Register */ +#define SICA_IMASK 0xFFC0010C /* SIC Interrupt Mask register 0 */ +#define SICA_IMASK0 0xFFC0010C /* SIC Interrupt Mask register 0 */ +#define SICA_IMASK1 0xFFC00110 /* SIC Interrupt Mask register 1 */ +#define SICA_IAR0 0xFFC00124 /* SIC Interrupt Assignment Register 0 */ +#define SICA_IAR1 0xFFC00128 /* SIC Interrupt Assignment Register 1 */ +#define SICA_IAR2 0xFFC0012C /* SIC Interrupt Assignment Register 2 */ +#define SICA_IAR3 0xFFC00130 /* SIC Interrupt Assignment Register 3 */ +#define SICA_IAR4 0xFFC00134 /* SIC Interrupt Assignment Register 4 */ +#define SICA_IAR5 0xFFC00138 /* SIC Interrupt Assignment Register 5 */ +#define SICA_IAR6 0xFFC0013C /* SIC Interrupt Assignment Register 6 */ +#define SICA_IAR7 0xFFC00140 /* SIC Interrupt Assignment Register 7 */ +#define SICA_ISR0 0xFFC00114 /* SIC Interrupt Status register 0 */ +#define SICA_ISR1 0xFFC00118 /* SIC Interrupt Status register 1 */ +#define SICA_IWR0 0xFFC0011C /* SIC Interrupt Wakeup-Enable register 0 */ +#define SICA_IWR1 0xFFC00120 /* SIC Interrupt Wakeup-Enable register 1 */ + +/* + * System Reset and Interrupt Controller registers for + * Core B (0xFFC0 1100-0xFFC0 11FF) + */ +#define SICB_SWRST 0xFFC01100 /* reserved */ +#define SICB_SYSCR 0xFFC01104 /* reserved */ +#define SICB_RVECT 0xFFC01108 /* SIC Reset Vector Address Register */ +#define SICB_IMASK0 0xFFC0110C /* SIC Interrupt Mask register 0 */ +#define SICB_IMASK1 0xFFC01110 /* SIC Interrupt Mask register 1 */ +#define SICB_IAR0 0xFFC01124 /* SIC Interrupt Assignment Register 0 */ +#define SICB_IAR1 0xFFC01128 /* SIC Interrupt Assignment Register 1 */ +#define SICB_IAR2 0xFFC0112C /* SIC Interrupt Assignment Register 2 */ +#define SICB_IAR3 0xFFC01130 /* SIC Interrupt Assignment Register 3 */ +#define SICB_IAR4 0xFFC01134 /* SIC Interrupt Assignment Register 4 */ +#define SICB_IAR5 0xFFC01138 /* SIC Interrupt Assignment Register 5 */ +#define SICB_IAR6 0xFFC0113C /* SIC Interrupt Assignment Register 6 */ +#define SICB_IAR7 0xFFC01140 /* SIC Interrupt Assignment Register 7 */ +#define SICB_ISR0 0xFFC01114 /* SIC Interrupt Status register 0 */ +#define SICB_ISR1 0xFFC01118 /* SIC Interrupt Status register 1 */ +#define SICB_IWR0 0xFFC0111C /* SIC Interrupt Wakeup-Enable register 0 */ +#define SICB_IWR1 0xFFC01120 /* SIC Interrupt Wakeup-Enable register 1 */ + +/* Watchdog Timer registers for Core A (0xFFC0 0200-0xFFC0 02FF) */ +#define WDOGA_CTL 0xFFC00200 /* Watchdog Control register */ +#define WDOGA_CNT 0xFFC00204 /* Watchdog Count register */ +#define WDOGA_STAT 0xFFC00208 /* Watchdog Status register */ + +/* Watchdog Timer registers for Core B (0xFFC0 1200-0xFFC0 12FF) */ +#define WDOGB_CTL 0xFFC01200 /* Watchdog Control register */ +#define WDOGB_CNT 0xFFC01204 /* Watchdog Count register */ +#define WDOGB_STAT 0xFFC01208 /* Watchdog Status register */ + +/* UART Controller (0xFFC00400 - 0xFFC004FF) */ +#define UART_THR 0xFFC00400 /* Transmit Holding register */ +#define UART_RBR 0xFFC00400 /* Receive Buffer register */ +#define UART_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */ +#define UART_IER 0xFFC00404 /* Interrupt Enable Register */ +#define UART_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */ +#define UART_IIR 0xFFC00408 /* Interrupt Identification Register */ +#define UART_LCR 0xFFC0040C /* Line Control Register */ +#define UART_MCR 0xFFC00410 /* Modem Control Register */ +#define UART_LSR 0xFFC00414 /* Line Status Register */ +#define UART_MSR 0xFFC00418 /* Modem Status Register */ +#define UART_SCR 0xFFC0041C /* SCR Scratch Register */ +#define UART_GCTL 0xFFC00424 /* Global Control Register */ + +/* SPI Controller (0xFFC00500 - 0xFFC005FF) */ +#define SPI_CTL 0xFFC00500 /* SPI Control Register */ +#define SPI_FLG 0xFFC00504 /* SPI Flag register */ +#define SPI_STAT 0xFFC00508 /* SPI Status register */ +#define SPI_TDBR 0xFFC0050C /* SPI Transmit Data Buffer Register */ +#define SPI_RDBR 0xFFC00510 /* SPI Receive Data Buffer Register */ +#define SPI_BAUD 0xFFC00514 /* SPI Baud rate Register */ +#define SPI_SHADOW 0xFFC00518 /* SPI_RDBR Shadow Register */ + +/* Timer 0-7 registers (0xFFC0 0600-0xFFC0 06FF) */ +#define TIMER0_CONFIG 0xFFC00600 /* Timer0 Configuration register */ +#define TIMER0_COUNTER 0xFFC00604 /* Timer0 Counter register */ +#define TIMER0_PERIOD 0xFFC00608 /* Timer0 Period register */ +#define TIMER0_WIDTH 0xFFC0060C /* Timer0 Width register */ +#define TIMER1_CONFIG 0xFFC00610 /* Timer1 Configuration register */ +#define TIMER1_COUNTER 0xFFC00614 /* Timer1 Counter register */ +#define TIMER1_PERIOD 0xFFC00618 /* Timer1 Period register */ +#define TIMER1_WIDTH 0xFFC0061C /* Timer1 Width register */ +#define TIMER2_CONFIG 0xFFC00620 /* Timer2 Configuration register */ +#define TIMER2_COUNTER 0xFFC00624 /* Timer2 Counter register */ +#define TIMER2_PERIOD 0xFFC00628 /* Timer2 Period register */ +#define TIMER2_WIDTH 0xFFC0062C /* Timer2 Width register */ +#define TIMER3_CONFIG 0xFFC00630 /* Timer3 Configuration register */ +#define TIMER3_COUNTER 0xFFC00634 /* Timer3 Counter register */ +#define TIMER3_PERIOD 0xFFC00638 /* Timer3 Period register */ +#define TIMER3_WIDTH 0xFFC0063C /* Timer3 Width register */ +#define TIMER4_CONFIG 0xFFC00640 /* Timer4 Configuration register */ +#define TIMER4_COUNTER 0xFFC00644 /* Timer4 Counter register */ +#define TIMER4_PERIOD 0xFFC00648 /* Timer4 Period register */ +#define TIMER4_WIDTH 0xFFC0064C /* Timer4 Width register */ +#define TIMER5_CONFIG 0xFFC00650 /* Timer5 Configuration register */ +#define TIMER5_COUNTER 0xFFC00654 /* Timer5 Counter register */ +#define TIMER5_PERIOD 0xFFC00658 /* Timer5 Period register */ +#define TIMER5_WIDTH 0xFFC0065C /* Timer5 Width register */ +#define TIMER6_CONFIG 0xFFC00660 /* Timer6 Configuration register */ +#define TIMER6_COUNTER 0xFFC00664 /* Timer6 Counter register */ +#define TIMER6_PERIOD 0xFFC00668 /* Timer6 Period register */ +#define TIMER6_WIDTH 0xFFC0066C /* Timer6 Width register */ +#define TIMER7_CONFIG 0xFFC00670 /* Timer7 Configuration register */ +#define TIMER7_COUNTER 0xFFC00674 /* Timer7 Counter register */ +#define TIMER7_PERIOD 0xFFC00678 /* Timer7 Period register */ +#define TIMER7_WIDTH 0xFFC0067C /* Timer7 Width register */ +#define TMRS8_ENABLE 0xFFC00680 /* Timer Enable Register */ +#define TMRS8_DISABLE 0xFFC00684 /* Timer Disable register */ +#define TMRS8_STATUS 0xFFC00688 /* Timer Status register */ + +/* Timer registers 8-11 (0xFFC0 1600-0xFFC0 16FF) */ +#define TIMER8_CONFIG 0xFFC01600 /* Timer8 Configuration register */ +#define TIMER8_COUNTER 0xFFC01604 /* Timer8 Counter register */ +#define TIMER8_PERIOD 0xFFC01608 /* Timer8 Period register */ +#define TIMER8_WIDTH 0xFFC0160C /* Timer8 Width register */ +#define TIMER9_CONFIG 0xFFC01610 /* Timer9 Configuration register */ +#define TIMER9_COUNTER 0xFFC01614 /* Timer9 Counter register */ +#define TIMER9_PERIOD 0xFFC01618 /* Timer9 Period register */ +#define TIMER9_WIDTH 0xFFC0161C /* Timer9 Width register */ +#define TIMER10_CONFIG 0xFFC01620 /* Timer10 Configuration register */ +#define TIMER10_COUNTER 0xFFC01624 /* Timer10 Counter register */ +#define TIMER10_PERIOD 0xFFC01628 /* Timer10 Period register */ +#define TIMER10_WIDTH 0xFFC0162C /* Timer10 Width register */ +#define TIMER11_CONFIG 0xFFC01630 /* Timer11 Configuration register */ +#define TIMER11_COUNTER 0xFFC01634 /* Timer11 Counter register */ +#define TIMER11_PERIOD 0xFFC01638 /* Timer11 Period register */ +#define TIMER11_WIDTH 0xFFC0163C /* Timer11 Width register */ +#define TMRS4_ENABLE 0xFFC01640 /* Timer Enable Register */ +#define TMRS4_DISABLE 0xFFC01644 /* Timer Disable register */ +#define TMRS4_STATUS 0xFFC01648 /* Timer Status register */ + +/* Programmable Flag 0 registers (0xFFC0 0700-0xFFC0 07FF) */ +#define FIO0_FLAG_D 0xFFC00700 /* Flag Data register */ +#define FIO0_FLAG_C 0xFFC00704 /* Flag Clear register */ +#define FIO0_FLAG_S 0xFFC00708 /* Flag Set register */ +#define FIO0_FLAG_T 0xFFC0070C /* Flag Toggle register */ +#define FIO0_MASKA_D 0xFFC00710 /* Flag Mask Interrupt A Data register */ +#define FIO0_MASKA_C 0xFFC00714 /* Flag Mask Interrupt A Clear register */ +#define FIO0_MASKA_S 0xFFC00718 /* Flag Mask Interrupt A Set register */ +#define FIO0_MASKA_T 0xFFC0071C /* Flag Mask Interrupt A Toggle register */ +#define FIO0_MASKB_D 0xFFC00720 /* Flag Mask Interrupt B Data register */ +#define FIO0_MASKB_C 0xFFC00724 /* Flag Mask Interrupt B Clear register */ +#define FIO0_MASKB_S 0xFFC00728 /* Flag Mask Interrupt B Set register */ +#define FIO0_MASKB_T 0xFFC0072C /* Flag Mask Interrupt B Toggle register */ +#define FIO0_DIR 0xFFC00730 /* Flag Direction register */ +#define FIO0_POLAR 0xFFC00734 /* Flag Polarity register */ +#define FIO0_EDGE 0xFFC00738 /* Flag Interrupt Sensitivity register */ +#define FIO0_BOTH 0xFFC0073C /* Flag Set on Both Edges register */ +#define FIO0_INEN 0xFFC00740 /* Flag Input Enable register */ + +/* Programmable Flag 1 registers (0xFFC0 1500-0xFFC0 15FF) */ +#define FIO1_FLAG_D 0xFFC01500 /* Flag Data register */ +#define FIO1_FLAG_C 0xFFC01504 /* Flag Clear register */ +#define FIO1_FLAG_S 0xFFC01508 /* Flag Set register */ +#define FIO1_FLAG_T 0xFFC0150C /* Flag Toggle register */ +#define FIO1_MASKA_D 0xFFC01510 /* Flag Mask Interrupt A Data register */ +#define FIO1_MASKA_C 0xFFC01514 /* Flag Mask Interrupt A Clear register */ +#define FIO1_MASKA_S 0xFFC01518 /* Flag Mask Interrupt A Set register */ +#define FIO1_MASKA_T 0xFFC0151C /* Flag Mask Interrupt A Toggle register */ +#define FIO1_MASKB_D 0xFFC01520 /* Flag Mask Interrupt B Data register */ +#define FIO1_MASKB_C 0xFFC01524 /* Flag Mask Interrupt B Clear register */ +#define FIO1_MASKB_S 0xFFC01528 /* Flag Mask Interrupt B Set register */ +#define FIO1_MASKB_T 0xFFC0152C /* Flag Mask Interrupt B Toggle register */ +#define FIO1_DIR 0xFFC01530 /* Flag Direction register */ +#define FIO1_POLAR 0xFFC01534 /* Flag Polarity register */ +#define FIO1_EDGE 0xFFC01538 /* Flag Interrupt Sensitivity register */ +#define FIO1_BOTH 0xFFC0153C /* Flag Set on Both Edges register */ +#define FIO1_INEN 0xFFC01540 /* Flag Input Enable register */ + +/* Programmable Flag registers (0xFFC0 1700-0xFFC0 17FF) */ +#define FIO2_FLAG_D 0xFFC01700 /* Flag Data register */ +#define FIO2_FLAG_C 0xFFC01704 /* Flag Clear register */ +#define FIO2_FLAG_S 0xFFC01708 /* Flag Set register */ +#define FIO2_FLAG_T 0xFFC0170C /* Flag Toggle register */ +#define FIO2_MASKA_D 0xFFC01710 /* Flag Mask Interrupt A Data register */ +#define FIO2_MASKA_C 0xFFC01714 /* Flag Mask Interrupt A Clear register */ +#define FIO2_MASKA_S 0xFFC01718 /* Flag Mask Interrupt A Set register */ +#define FIO2_MASKA_T 0xFFC0171C /* Flag Mask Interrupt A Toggle register */ +#define FIO2_MASKB_D 0xFFC01720 /* Flag Mask Interrupt B Data register */ +#define FIO2_MASKB_C 0xFFC01724 /* Flag Mask Interrupt B Clear register */ +#define FIO2_MASKB_S 0xFFC01728 /* Flag Mask Interrupt B Set register */ +#define FIO2_MASKB_T 0xFFC0172C /* Flag Mask Interrupt B Toggle register */ +#define FIO2_DIR 0xFFC01730 /* Flag Direction register */ +#define FIO2_POLAR 0xFFC01734 /* Flag Polarity register */ +#define FIO2_EDGE 0xFFC01738 /* Flag Interrupt Sensitivity register */ +#define FIO2_BOTH 0xFFC0173C /* Flag Set on Both Edges register */ +#define FIO2_INEN 0xFFC01740 /* Flag Input Enable register */ + +/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */ +#define SPORT0_TCR1 0xFFC00800 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_TCR2 0xFFC00804 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_TCLKDIV 0xFFC00808 /* SPORT0 Transmit Clock Divider */ +#define SPORT0_TFSDIV 0xFFC0080C /* SPORT0 Transmit Frame Sync Divider */ +#define SPORT0_TX 0xFFC00810 /* SPORT0 TX Data Register */ +#define SPORT0_RX 0xFFC00818 /* SPORT0 RX Data Register */ +#define SPORT0_RCR1 0xFFC00820 /* SPORT0 Transmit Configuration 1 Register */ +#define SPORT0_RCR2 0xFFC00824 /* SPORT0 Transmit Configuration 2 Register */ +#define SPORT0_RCLKDIV 0xFFC00828 /* SPORT0 Receive Clock Divider */ +#define SPORT0_RFSDIV 0xFFC0082C /* SPORT0 Receive Frame Sync Divider */ +#define SPORT0_STAT 0xFFC00830 /* SPORT0 Status Register */ +#define SPORT0_CHNL 0xFFC00834 /* SPORT0 Current Channel Register */ +#define SPORT0_MCMC1 0xFFC00838 /* SPORT0 Multi-Channel Configuration Register 1 */ +#define SPORT0_MCMC2 0xFFC0083C /* SPORT0 Multi-Channel Configuration Register 2 */ +#define SPORT0_MTCS0 0xFFC00840 /* SPORT0 Multi-Channel Transmit Select Register 0 */ +#define SPORT0_MTCS1 0xFFC00844 /* SPORT0 Multi-Channel Transmit Select Register 1 */ +#define SPORT0_MTCS2 0xFFC00848 /* SPORT0 Multi-Channel Transmit Select Register 2 */ +#define SPORT0_MTCS3 0xFFC0084C /* SPORT0 Multi-Channel Transmit Select Register 3 */ +#define SPORT0_MRCS0 0xFFC00850 /* SPORT0 Multi-Channel Receive Select Register 0 */ +#define SPORT0_MRCS1 0xFFC00854 /* SPORT0 Multi-Channel Receive Select Register 1 */ +#define SPORT0_MRCS2 0xFFC00858 /* SPORT0 Multi-Channel Receive Select Register 2 */ +#define SPORT0_MRCS3 0xFFC0085C /* SPORT0 Multi-Channel Receive Select Register 3 */ + +/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */ +#define SPORT1_TCR1 0xFFC00900 /* SPORT1 Transmit Configuration 1 Register */ +#define SPORT1_TCR2 0xFFC00904 /* SPORT1 Transmit Configuration 2 Register */ +#define SPORT1_TCLKDIV 0xFFC00908 /* SPORT1 Transmit Clock Divider */ +#define SPORT1_TFSDIV 0xFFC0090C /* SPORT1 Transmit Frame Sync Divider */ +#define SPORT1_TX 0xFFC00910 /* SPORT1 TX Data Register */ +#define SPORT1_RX 0xFFC00918 /* SPORT1 RX Data Register */ +#define SPORT1_RCR1 0xFFC00920 /* SPORT1 Transmit Configuration 1 Register */ +#define SPORT1_RCR2 0xFFC00924 /* SPORT1 Transmit Configuration 2 Register */ +#define SPORT1_RCLKDIV 0xFFC00928 /* SPORT1 Receive Clock Divider */ +#define SPORT1_RFSDIV 0xFFC0092C /* SPORT1 Receive Frame Sync Divider */ +#define SPORT1_STAT 0xFFC00930 /* SPORT1 Status Register */ +#define SPORT1_CHNL 0xFFC00934 /* SPORT1 Current Channel Register */ +#define SPORT1_MCMC1 0xFFC00938 /* SPORT1 Multi-Channel Configuration Register 1 */ +#define SPORT1_MCMC2 0xFFC0093C /* SPORT1 Multi-Channel Configuration Register 2 */ +#define SPORT1_MTCS0 0xFFC00940 /* SPORT1 Multi-Channel Transmit Select Register 0 */ +#define SPORT1_MTCS1 0xFFC00944 /* SPORT1 Multi-Channel Transmit Select Register 1 */ +#define SPORT1_MTCS2 0xFFC00948 /* SPORT1 Multi-Channel Transmit Select Register 2 */ +#define SPORT1_MTCS3 0xFFC0094C /* SPORT1 Multi-Channel Transmit Select Register 3 */ +#define SPORT1_MRCS0 0xFFC00950 /* SPORT1 Multi-Channel Receive Select Register 0 */ +#define SPORT1_MRCS1 0xFFC00954 /* SPORT1 Multi-Channel Receive Select Register 1 */ +#define SPORT1_MRCS2 0xFFC00958 /* SPORT1 Multi-Channel Receive Select Register 2 */ +#define SPORT1_MRCS3 0xFFC0095C /* SPORT1 Multi-Channel Receive Select Register 3 */ + +/* Asynchronous Memory Controller - External Bus Interface Unit */ +#define EBIU_AMGCTL 0xFFC00A00 /* Asynchronous Memory Global Control Register */ +#define EBIU_AMBCTL0 0xFFC00A04 /* Asynchronous Memory Bank Control Register 0 */ +#define EBIU_AMBCTL1 0xFFC00A08 /* Asynchronous Memory Bank Control Register 1 */ + +/* SDRAM Controller External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */ +#define EBIU_SDGCTL 0xFFC00A10 /* SDRAM Global Control Register */ +#define EBIU_SDBCTL 0xFFC00A14 /* SDRAM Bank Control Register */ +#define EBIU_SDRRC 0xFFC00A18 /* SDRAM Refresh Rate Control Register */ +#define EBIU_SDSTAT 0xFFC00A1C /* SDRAM Status Register */ + +/* Parallel Peripheral Interface (PPI) 0 registers (0xFFC0 1000-0xFFC0 10FF) */ +#define PPI0_CONTROL 0xFFC01000 /* PPI0 Control register */ +#define PPI0_STATUS 0xFFC01004 /* PPI0 Status register */ +#define PPI0_COUNT 0xFFC01008 /* PPI0 Transfer Count register */ +#define PPI0_DELAY 0xFFC0100C /* PPI0 Delay Count register */ +#define PPI0_FRAME 0xFFC01010 /* PPI0 Frame Length register */ + +/* Parallel Peripheral Interface (PPI) 1 registers (0xFFC0 1300-0xFFC0 13FF) */ +#define PPI1_CONTROL 0xFFC01300 /* PPI1 Control register */ +#define PPI1_STATUS 0xFFC01304 /* PPI1 Status register */ +#define PPI1_COUNT 0xFFC01308 /* PPI1 Transfer Count register */ +#define PPI1_DELAY 0xFFC0130C /* PPI1 Delay Count register */ +#define PPI1_FRAME 0xFFC01310 /* PPI1 Frame Length register */ + +/* DMA Traffic controls */ +#define DMA_TCPER 0xFFC00B0C /* Traffic Control Periods Register */ +#define DMA_TCCNT 0xFFC00B10 /* Traffic Control Current Counts Register */ +#define DMA_TC_PER 0xFFC00B0C /* Traffic Control Periods Register */ +#define DMA_TC_CNT 0xFFC00B10 /* Traffic Control Current Counts Register */ + +/* DMA1 Controller registers (0xFFC0 1C00-0xFFC0 1FFF) */ +#define DMA1_0_CONFIG 0xFFC01C08 /* DMA1 Channel 0 Configuration register */ +#define DMA1_0_NEXT_DESC_PTR 0xFFC01C00 /* DMA1 Channel 0 Next Descripter Ptr Reg */ +#define DMA1_0_START_ADDR 0xFFC01C04 /* DMA1 Channel 0 Start Address */ +#define DMA1_0_X_COUNT 0xFFC01C10 /* DMA1 Channel 0 Inner Loop Count */ +#define DMA1_0_Y_COUNT 0xFFC01C18 /* DMA1 Channel 0 Outer Loop Count */ +#define DMA1_0_X_MODIFY 0xFFC01C14 /* DMA1 Channel 0 Inner Loop Addr Increment */ +#define DMA1_0_Y_MODIFY 0xFFC01C1C /* DMA1 Channel 0 Outer Loop Addr Increment */ +#define DMA1_0_CURR_DESC_PTR 0xFFC01C20 /* DMA1 Channel 0 Current Descriptor Pointer */ +#define DMA1_0_CURR_ADDR 0xFFC01C24 /* DMA1 Channel 0 Current Address Pointer */ +#define DMA1_0_CURR_X_COUNT 0xFFC01C30 /* DMA1 Channel 0 Current Inner Loop Count */ +#define DMA1_0_CURR_Y_COUNT 0xFFC01C38 /* DMA1 Channel 0 Current Outer Loop Count */ +#define DMA1_0_IRQ_STATUS 0xFFC01C28 /* DMA1 Channel 0 Interrupt Status Register */ +#define DMA1_0_PERIPHERAL_MAP 0xFFC01C2C /* DMA1 Channel 0 Peripheral Map Register */ + +#define DMA1_1_CONFIG 0xFFC01C48 /* DMA1 Channel 1 Configuration register */ +#define DMA1_1_NEXT_DESC_PTR 0xFFC01C40 /* DMA1 Channel 1 Next Descripter Ptr Reg */ +#define DMA1_1_START_ADDR 0xFFC01C44 /* DMA1 Channel 1 Start Address */ +#define DMA1_1_X_COUNT 0xFFC01C50 /* DMA1 Channel 1 Inner Loop Count */ +#define DMA1_1_Y_COUNT 0xFFC01C58 /* DMA1 Channel 1 Outer Loop Count */ +#define DMA1_1_X_MODIFY 0xFFC01C54 /* DMA1 Channel 1 Inner Loop Addr Increment */ +#define DMA1_1_Y_MODIFY 0xFFC01C5C /* DMA1 Channel 1 Outer Loop Addr Increment */ +#define DMA1_1_CURR_DESC_PTR 0xFFC01C60 /* DMA1 Channel 1 Current Descriptor Pointer */ +#define DMA1_1_CURR_ADDR 0xFFC01C64 /* DMA1 Channel 1 Current Address Pointer */ +#define DMA1_1_CURR_X_COUNT 0xFFC01C70 /* DMA1 Channel 1 Current Inner Loop Count */ +#define DMA1_1_CURR_Y_COUNT 0xFFC01C78 /* DMA1 Channel 1 Current Outer Loop Count */ +#define DMA1_1_IRQ_STATUS 0xFFC01C68 /* DMA1 Channel 1 Interrupt Status Register */ +#define DMA1_1_PERIPHERAL_MAP 0xFFC01C6C /* DMA1 Channel 1 Peripheral Map Register */ + +#define DMA1_2_CONFIG 0xFFC01C88 /* DMA1 Channel 2 Configuration register */ +#define DMA1_2_NEXT_DESC_PTR 0xFFC01C80 /* DMA1 Channel 2 Next Descripter Ptr Reg */ +#define DMA1_2_START_ADDR 0xFFC01C84 /* DMA1 Channel 2 Start Address */ +#define DMA1_2_X_COUNT 0xFFC01C90 /* DMA1 Channel 2 Inner Loop Count */ +#define DMA1_2_Y_COUNT 0xFFC01C98 /* DMA1 Channel 2 Outer Loop Count */ +#define DMA1_2_X_MODIFY 0xFFC01C94 /* DMA1 Channel 2 Inner Loop Addr Increment */ +#define DMA1_2_Y_MODIFY 0xFFC01C9C /* DMA1 Channel 2 Outer Loop Addr Increment */ +#define DMA1_2_CURR_DESC_PTR 0xFFC01CA0 /* DMA1 Channel 2 Current Descriptor Pointer */ +#define DMA1_2_CURR_ADDR 0xFFC01CA4 /* DMA1 Channel 2 Current Address Pointer */ +#define DMA1_2_CURR_X_COUNT 0xFFC01CB0 /* DMA1 Channel 2 Current Inner Loop Count */ +#define DMA1_2_CURR_Y_COUNT 0xFFC01CB8 /* DMA1 Channel 2 Current Outer Loop Count */ +#define DMA1_2_IRQ_STATUS 0xFFC01CA8 /* DMA1 Channel 2 Interrupt Status Register */ +#define DMA1_2_PERIPHERAL_MAP 0xFFC01CAC /* DMA1 Channel 2 Peripheral Map Register */ + +#define DMA1_3_CONFIG 0xFFC01CC8 /* DMA1 Channel 3 Configuration register */ +#define DMA1_3_NEXT_DESC_PTR 0xFFC01CC0 /* DMA1 Channel 3 Next Descripter Ptr Reg */ +#define DMA1_3_START_ADDR 0xFFC01CC4 /* DMA1 Channel 3 Start Address */ +#define DMA1_3_X_COUNT 0xFFC01CD0 /* DMA1 Channel 3 Inner Loop Count */ +#define DMA1_3_Y_COUNT 0xFFC01CD8 /* DMA1 Channel 3 Outer Loop Count */ +#define DMA1_3_X_MODIFY 0xFFC01CD4 /* DMA1 Channel 3 Inner Loop Addr Increment */ +#define DMA1_3_Y_MODIFY 0xFFC01CDC /* DMA1 Channel 3 Outer Loop Addr Increment */ +#define DMA1_3_CURR_DESC_PTR 0xFFC01CE0 /* DMA1 Channel 3 Current Descriptor Pointer */ +#define DMA1_3_CURR_ADDR 0xFFC01CE4 /* DMA1 Channel 3 Current Address Pointer */ +#define DMA1_3_CURR_X_COUNT 0xFFC01CF0 /* DMA1 Channel 3 Current Inner Loop Count */ +#define DMA1_3_CURR_Y_COUNT 0xFFC01CF8 /* DMA1 Channel 3 Current Outer Loop Count */ +#define DMA1_3_IRQ_STATUS 0xFFC01CE8 /* DMA1 Channel 3 Interrupt Status Register */ +#define DMA1_3_PERIPHERAL_MAP 0xFFC01CEC /* DMA1 Channel 3 Peripheral Map Register */ + +#define DMA1_4_CONFIG 0xFFC01D08 /* DMA1 Channel 4 Configuration register */ +#define DMA1_4_NEXT_DESC_PTR 0xFFC01D00 /* DMA1 Channel 4 Next Descripter Ptr Reg */ +#define DMA1_4_START_ADDR 0xFFC01D04 /* DMA1 Channel 4 Start Address */ +#define DMA1_4_X_COUNT 0xFFC01D10 /* DMA1 Channel 4 Inner Loop Count */ +#define DMA1_4_Y_COUNT 0xFFC01D18 /* DMA1 Channel 4 Outer Loop Count */ +#define DMA1_4_X_MODIFY 0xFFC01D14 /* DMA1 Channel 4 Inner Loop Addr Increment */ +#define DMA1_4_Y_MODIFY 0xFFC01D1C /* DMA1 Channel 4 Outer Loop Addr Increment */ +#define DMA1_4_CURR_DESC_PTR 0xFFC01D20 /* DMA1 Channel 4 Current Descriptor Pointer */ +#define DMA1_4_CURR_ADDR 0xFFC01D24 /* DMA1 Channel 4 Current Address Pointer */ +#define DMA1_4_CURR_X_COUNT 0xFFC01D30 /* DMA1 Channel 4 Current Inner Loop Count */ +#define DMA1_4_CURR_Y_COUNT 0xFFC01D38 /* DMA1 Channel 4 Current Outer Loop Count */ +#define DMA1_4_IRQ_STATUS 0xFFC01D28 /* DMA1 Channel 4 Interrupt Status Register */ +#define DMA1_4_PERIPHERAL_MAP 0xFFC01D2C /* DMA1 Channel 4 Peripheral Map Register */ + +#define DMA1_5_CONFIG 0xFFC01D48 /* DMA1 Channel 5 Configuration register */ +#define DMA1_5_NEXT_DESC_PTR 0xFFC01D40 /* DMA1 Channel 5 Next Descripter Ptr Reg */ +#define DMA1_5_START_ADDR 0xFFC01D44 /* DMA1 Channel 5 Start Address */ +#define DMA1_5_X_COUNT 0xFFC01D50 /* DMA1 Channel 5 Inner Loop Count */ +#define DMA1_5_Y_COUNT 0xFFC01D58 /* DMA1 Channel 5 Outer Loop Count */ +#define DMA1_5_X_MODIFY 0xFFC01D54 /* DMA1 Channel 5 Inner Loop Addr Increment */ +#define DMA1_5_Y_MODIFY 0xFFC01D5C /* DMA1 Channel 5 Outer Loop Addr Increment */ +#define DMA1_5_CURR_DESC_PTR 0xFFC01D60 /* DMA1 Channel 5 Current Descriptor Pointer */ +#define DMA1_5_CURR_ADDR 0xFFC01D64 /* DMA1 Channel 5 Current Address Pointer */ +#define DMA1_5_CURR_X_COUNT 0xFFC01D70 /* DMA1 Channel 5 Current Inner Loop Count */ +#define DMA1_5_CURR_Y_COUNT 0xFFC01D78 /* DMA1 Channel 5 Current Outer Loop Count */ +#define DMA1_5_IRQ_STATUS 0xFFC01D68 /* DMA1 Channel 5 Interrupt Status Register */ +#define DMA1_5_PERIPHERAL_MAP 0xFFC01D6C /* DMA1 Channel 5 Peripheral Map Register */ + +#define DMA1_6_CONFIG 0xFFC01D88 /* DMA1 Channel 6 Configuration register */ +#define DMA1_6_NEXT_DESC_PTR 0xFFC01D80 /* DMA1 Channel 6 Next Descripter Ptr Reg */ +#define DMA1_6_START_ADDR 0xFFC01D84 /* DMA1 Channel 6 Start Address */ +#define DMA1_6_X_COUNT 0xFFC01D90 /* DMA1 Channel 6 Inner Loop Count */ +#define DMA1_6_Y_COUNT 0xFFC01D98 /* DMA1 Channel 6 Outer Loop Count */ +#define DMA1_6_X_MODIFY 0xFFC01D94 /* DMA1 Channel 6 Inner Loop Addr Increment */ +#define DMA1_6_Y_MODIFY 0xFFC01D9C /* DMA1 Channel 6 Outer Loop Addr Increment */ +#define DMA1_6_CURR_DESC_PTR 0xFFC01DA0 /* DMA1 Channel 6 Current Descriptor Pointer */ +#define DMA1_6_CURR_ADDR 0xFFC01DA4 /* DMA1 Channel 6 Current Address Pointer */ +#define DMA1_6_CURR_X_COUNT 0xFFC01DB0 /* DMA1 Channel 6 Current Inner Loop Count */ +#define DMA1_6_CURR_Y_COUNT 0xFFC01DB8 /* DMA1 Channel 6 Current Outer Loop Count */ +#define DMA1_6_IRQ_STATUS 0xFFC01DA8 /* DMA1 Channel 6 Interrupt Status Register */ +#define DMA1_6_PERIPHERAL_MAP 0xFFC01DAC /* DMA1 Channel 6 Peripheral Map Register */ + +#define DMA1_7_CONFIG 0xFFC01DC8 /* DMA1 Channel 7 Configuration register */ +#define DMA1_7_NEXT_DESC_PTR 0xFFC01DC0 /* DMA1 Channel 7 Next Descripter Ptr Reg */ +#define DMA1_7_START_ADDR 0xFFC01DC4 /* DMA1 Channel 7 Start Address */ +#define DMA1_7_X_COUNT 0xFFC01DD0 /* DMA1 Channel 7 Inner Loop Count */ +#define DMA1_7_Y_COUNT 0xFFC01DD8 /* DMA1 Channel 7 Outer Loop Count */ +#define DMA1_7_X_MODIFY 0xFFC01DD4 /* DMA1 Channel 7 Inner Loop Addr Increment */ +#define DMA1_7_Y_MODIFY 0xFFC01DDC /* DMA1 Channel 7 Outer Loop Addr Increment */ +#define DMA1_7_CURR_DESC_PTR 0xFFC01DE0 /* DMA1 Channel 7 Current Descriptor Pointer */ +#define DMA1_7_CURR_ADDR 0xFFC01DE4 /* DMA1 Channel 7 Current Address Pointer */ +#define DMA1_7_CURR_X_COUNT 0xFFC01DF0 /* DMA1 Channel 7 Current Inner Loop Count */ +#define DMA1_7_CURR_Y_COUNT 0xFFC01DF8 /* DMA1 Channel 7 Current Outer Loop Count */ +#define DMA1_7_IRQ_STATUS 0xFFC01DE8 /* DMA1 Channel 7 Interrupt Status Register */ +#define DMA1_7_PERIPHERAL_MAP 0xFFC01DEC /* DMA1 Channel 7 Peripheral Map Register */ + +#define DMA1_8_CONFIG 0xFFC01E08 /* DMA1 Channel 8 Configuration register */ +#define DMA1_8_NEXT_DESC_PTR 0xFFC01E00 /* DMA1 Channel 8 Next Descripter Ptr Reg */ +#define DMA1_8_START_ADDR 0xFFC01E04 /* DMA1 Channel 8 Start Address */ +#define DMA1_8_X_COUNT 0xFFC01E10 /* DMA1 Channel 8 Inner Loop Count */ +#define DMA1_8_Y_COUNT 0xFFC01E18 /* DMA1 Channel 8 Outer Loop Count */ +#define DMA1_8_X_MODIFY 0xFFC01E14 /* DMA1 Channel 8 Inner Loop Addr Increment */ +#define DMA1_8_Y_MODIFY 0xFFC01E1C /* DMA1 Channel 8 Outer Loop Addr Increment */ +#define DMA1_8_CURR_DESC_PTR 0xFFC01E20 /* DMA1 Channel 8 Current Descriptor Pointer */ +#define DMA1_8_CURR_ADDR 0xFFC01E24 /* DMA1 Channel 8 Current Address Pointer */ +#define DMA1_8_CURR_X_COUNT 0xFFC01E30 /* DMA1 Channel 8 Current Inner Loop Count */ +#define DMA1_8_CURR_Y_COUNT 0xFFC01E38 /* DMA1 Channel 8 Current Outer Loop Count */ +#define DMA1_8_IRQ_STATUS 0xFFC01E28 /* DMA1 Channel 8 Interrupt Status Register */ +#define DMA1_8_PERIPHERAL_MAP 0xFFC01E2C /* DMA1 Channel 8 Peripheral Map Register */ + +#define DMA1_9_CONFIG 0xFFC01E48 /* DMA1 Channel 9 Configuration register */ +#define DMA1_9_NEXT_DESC_PTR 0xFFC01E40 /* DMA1 Channel 9 Next Descripter Ptr Reg */ +#define DMA1_9_START_ADDR 0xFFC01E44 /* DMA1 Channel 9 Start Address */ +#define DMA1_9_X_COUNT 0xFFC01E50 /* DMA1 Channel 9 Inner Loop Count */ +#define DMA1_9_Y_COUNT 0xFFC01E58 /* DMA1 Channel 9 Outer Loop Count */ +#define DMA1_9_X_MODIFY 0xFFC01E54 /* DMA1 Channel 9 Inner Loop Addr Increment */ +#define DMA1_9_Y_MODIFY 0xFFC01E5C /* DMA1 Channel 9 Outer Loop Addr Increment */ +#define DMA1_9_CURR_DESC_PTR 0xFFC01E60 /* DMA1 Channel 9 Current Descriptor Pointer */ +#define DMA1_9_CURR_ADDR 0xFFC01E64 /* DMA1 Channel 9 Current Address Pointer */ +#define DMA1_9_CURR_X_COUNT 0xFFC01E70 /* DMA1 Channel 9 Current Inner Loop Count */ +#define DMA1_9_CURR_Y_COUNT 0xFFC01E78 /* DMA1 Channel 9 Current Outer Loop Count */ +#define DMA1_9_IRQ_STATUS 0xFFC01E68 /* DMA1 Channel 9 Interrupt Status Register */ +#define DMA1_9_PERIPHERAL_MAP 0xFFC01E6C /* DMA1 Channel 9 Peripheral Map Register */ + +#define DMA1_10_CONFIG 0xFFC01E88 /* DMA1 Channel 10 Configuration register */ +#define DMA1_10_NEXT_DESC_PTR 0xFFC01E80 /* DMA1 Channel 10 Next Descripter Ptr Reg */ +#define DMA1_10_START_ADDR 0xFFC01E84 /* DMA1 Channel 10 Start Address */ +#define DMA1_10_X_COUNT 0xFFC01E90 /* DMA1 Channel 10 Inner Loop Count */ +#define DMA1_10_Y_COUNT 0xFFC01E98 /* DMA1 Channel 10 Outer Loop Count */ +#define DMA1_10_X_MODIFY 0xFFC01E94 /* DMA1 Channel 10 Inner Loop Addr Increment */ +#define DMA1_10_Y_MODIFY 0xFFC01E9C /* DMA1 Channel 10 Outer Loop Addr Increment */ +#define DMA1_10_CURR_DESC_PTR 0xFFC01EA0 /* DMA1 Channel 10 Current Descriptor Pointer */ +#define DMA1_10_CURR_ADDR 0xFFC01EA4 /* DMA1 Channel 10 Current Address Pointer */ +#define DMA1_10_CURR_X_COUNT 0xFFC01EB0 /* DMA1 Channel 10 Current Inner Loop Count */ +#define DMA1_10_CURR_Y_COUNT 0xFFC01EB8 /* DMA1 Channel 10 Current Outer Loop Count */ +#define DMA1_10_IRQ_STATUS 0xFFC01EA8 /* DMA1 Channel 10 Interrupt Status Register */ +#define DMA1_10_PERIPHERAL_MAP 0xFFC01EAC /* DMA1 Channel 10 Peripheral Map Register */ + +#define DMA1_11_CONFIG 0xFFC01EC8 /* DMA1 Channel 11 Configuration register */ +#define DMA1_11_NEXT_DESC_PTR 0xFFC01EC0 /* DMA1 Channel 11 Next Descripter Ptr Reg */ +#define DMA1_11_START_ADDR 0xFFC01EC4 /* DMA1 Channel 11 Start Address */ +#define DMA1_11_X_COUNT 0xFFC01ED0 /* DMA1 Channel 11 Inner Loop Count */ +#define DMA1_11_Y_COUNT 0xFFC01ED8 /* DMA1 Channel 11 Outer Loop Count */ +#define DMA1_11_X_MODIFY 0xFFC01ED4 /* DMA1 Channel 11 Inner Loop Addr Increment */ +#define DMA1_11_Y_MODIFY 0xFFC01EDC /* DMA1 Channel 11 Outer Loop Addr Increment */ +#define DMA1_11_CURR_DESC_PTR 0xFFC01EE0 /* DMA1 Channel 11 Current Descriptor Pointer */ +#define DMA1_11_CURR_ADDR 0xFFC01EE4 /* DMA1 Channel 11 Current Address Pointer */ +#define DMA1_11_CURR_X_COUNT 0xFFC01EF0 /* DMA1 Channel 11 Current Inner Loop Count */ +#define DMA1_11_CURR_Y_COUNT 0xFFC01EF8 /* DMA1 Channel 11 Current Outer Loop Count */ +#define DMA1_11_IRQ_STATUS 0xFFC01EE8 /* DMA1 Channel 11 Interrupt Status Register */ +#define DMA1_11_PERIPHERAL_MAP 0xFFC01EEC /* DMA1 Channel 11 Peripheral Map Register */ + +/* Memory DMA1 Controller registers (0xFFC0 1E80-0xFFC0 1FFF) */ +#define MDMA1_D0_CONFIG 0xFFC01F08 /* MemDMA1 Stream 0 Destination Configuration */ +#define MDMA1_D0_NEXT_DESC_PTR 0xFFC01F00 /* MemDMA1 Stream 0 Destination Next Descriptor Ptr Reg */ +#define MDMA1_D0_START_ADDR 0xFFC01F04 /* MemDMA1 Stream 0 Destination Start Address */ +#define MDMA1_D0_X_COUNT 0xFFC01F10 /* MemDMA1 Stream 0 Destination Inner-Loop Count */ +#define MDMA1_D0_Y_COUNT 0xFFC01F18 /* MemDMA1 Stream 0 Destination Outer-Loop Count */ +#define MDMA1_D0_X_MODIFY 0xFFC01F14 /* MemDMA1 Stream 0 Dest Inner-Loop Address-Increment */ +#define MDMA1_D0_Y_MODIFY 0xFFC01F1C /* MemDMA1 Stream 0 Dest Outer-Loop Address-Increment */ +#define MDMA1_D0_CURR_DESC_PTR 0xFFC01F20 /* MemDMA1 Stream 0 Dest Current Descriptor Ptr reg */ +#define MDMA1_D0_CURR_ADDR 0xFFC01F24 /* MemDMA1 Stream 0 Destination Current Address */ +#define MDMA1_D0_CURR_X_COUNT 0xFFC01F30 /* MemDMA1 Stream 0 Dest Current Inner-Loop Count */ +#define MDMA1_D0_CURR_Y_COUNT 0xFFC01F38 /* MemDMA1 Stream 0 Dest Current Outer-Loop Count */ +#define MDMA1_D0_IRQ_STATUS 0xFFC01F28 /* MemDMA1 Stream 0 Destination Interrupt/Status */ +#define MDMA1_D0_PERIPHERAL_MAP 0xFFC01F2C /* MemDMA1 Stream 0 Destination Peripheral Map */ + +#define MDMA1_S0_CONFIG 0xFFC01F48 /* MemDMA1 Stream 0 Source Configuration */ +#define MDMA1_S0_NEXT_DESC_PTR 0xFFC01F40 /* MemDMA1 Stream 0 Source Next Descriptor Ptr Reg */ +#define MDMA1_S0_START_ADDR 0xFFC01F44 /* MemDMA1 Stream 0 Source Start Address */ +#define MDMA1_S0_X_COUNT 0xFFC01F50 /* MemDMA1 Stream 0 Source Inner-Loop Count */ +#define MDMA1_S0_Y_COUNT 0xFFC01F58 /* MemDMA1 Stream 0 Source Outer-Loop Count */ +#define MDMA1_S0_X_MODIFY 0xFFC01F54 /* MemDMA1 Stream 0 Source Inner-Loop Address-Increment */ +#define MDMA1_S0_Y_MODIFY 0xFFC01F5C /* MemDMA1 Stream 0 Source Outer-Loop Address-Increment */ +#define MDMA1_S0_CURR_DESC_PTR 0xFFC01F60 /* MemDMA1 Stream 0 Source Current Descriptor Ptr reg */ +#define MDMA1_S0_CURR_ADDR 0xFFC01F64 /* MemDMA1 Stream 0 Source Current Address */ +#define MDMA1_S0_CURR_X_COUNT 0xFFC01F70 /* MemDMA1 Stream 0 Source Current Inner-Loop Count */ +#define MDMA1_S0_CURR_Y_COUNT ` 0xFFC01F78 /* MemDMA1 Stream 0 Source Current Outer-Loop Count */ +#define MDMA1_S0_IRQ_STATUS 0xFFC01F68 /* MemDMA1 Stream 0 Source Interrupt/Status */ +#define MDMA1_S0_PERIPHERAL_MAP 0xFFC01F6C /* MemDMA1 Stream 0 Source Peripheral Map */ + +#define MDMA1_D1_CONFIG 0xFFC01F88 /* MemDMA1 Stream 1 Destination Configuration */ +#define MDMA1_D1_NEXT_DESC_PTR 0xFFC01F80 /* MemDMA1 Stream 1 Destination Next Descriptor Ptr Reg */ +#define MDMA1_D1_START_ADDR 0xFFC01F84 /* MemDMA1 Stream 1 Destination Start Address */ +#define MDMA1_D1_X_COUNT 0xFFC01F90 /* MemDMA1 Stream 1 Destination Inner-Loop Count */ +#define MDMA1_D1_Y_COUNT 0xFFC01F98 /* MemDMA1 Stream 1 Destination Outer-Loop Count */ +#define MDMA1_D1_X_MODIFY 0xFFC01F94 /* MemDMA1 Stream 1 Dest Inner-Loop Address-Increment */ +#define MDMA1_D1_Y_MODIFY 0xFFC01F9C /* MemDMA1 Stream 1 Dest Outer-Loop Address-Increment */ +#define MDMA1_D1_CURR_DESC_PTR 0xFFC01FA0 /* MemDMA1 Stream 1 Dest Current Descriptor Ptr reg */ +#define MDMA1_D1_CURR_ADDR 0xFFC01FA4 /* MemDMA1 Stream 1 Dest Current Address */ +#define MDMA1_D1_CURR_X_COUNT 0xFFC01FB0 /* MemDMA1 Stream 1 Dest Current Inner-Loop Count */ +#define MDMA1_D1_CURR_Y_COUNT 0xFFC01FB8 /* MemDMA1 Stream 1 Dest Current Outer-Loop Count */ +#define MDMA1_D1_IRQ_STATUS 0xFFC01FA8 /* MemDMA1 Stream 1 Dest Interrupt/Status */ +#define MDMA1_D1_PERIPHERAL_MAP 0xFFC01FAC /* MemDMA1 Stream 1 Dest Peripheral Map */ + +#define MDMA1_S1_CONFIG 0xFFC01FC8 /* MemDMA1 Stream 1 Source Configuration */ +#define MDMA1_S1_NEXT_DESC_PTR 0xFFC01FC0 /* MemDMA1 Stream 1 Source Next Descriptor Ptr Reg */ +#define MDMA1_S1_START_ADDR 0xFFC01FC4 /* MemDMA1 Stream 1 Source Start Address */ +#define MDMA1_S1_X_COUNT 0xFFC01FD0 /* MemDMA1 Stream 1 Source Inner-Loop Count */ +#define MDMA1_S1_Y_COUNT 0xFFC01FD8 /* MemDMA1 Stream 1 Source Outer-Loop Count */ +#define MDMA1_S1_X_MODIFY 0xFFC01FD4 /* MemDMA1 Stream 1 Source Inner-Loop Address-Increment */ +#define MDMA1_S1_Y_MODIFY 0xFFC01FDC /* MemDMA1 Stream 1 Source Outer-Loop Address-Increment */ +#define MDMA1_S1_CURR_DESC_PTR 0xFFC01FE0 /* MemDMA1 Stream 1 Source Current Descriptor Ptr reg */ +#define MDMA1_S1_CURR_ADDR 0xFFC01FE4 /* MemDMA1 Stream 1 Source Current Address */ +#define MDMA1_S1_CURR_X_COUNT 0xFFC01FF0 /* MemDMA1 Stream 1 Source Current Inner-Loop Count */ +#define MDMA1_S1_CURR_Y_COUNT 0xFFC01FF8 /* MemDMA1 Stream 1 Source Current Outer-Loop Count */ +#define MDMA1_S1_IRQ_STATUS 0xFFC01FE8 /* MemDMA1 Stream 1 Source Interrupt/Status */ +#define MDMA1_S1_PERIPHERAL_MAP 0xFFC01FEC /* MemDMA1 Stream 1 Source Peripheral Map */ + +/* DMA2 Controller registers (0xFFC0 0C00-0xFFC0 0DFF) */ +#define DMA2_0_CONFIG 0xFFC00C08 /* DMA2 Channel 0 Configuration register */ +#define DMA2_0_NEXT_DESC_PTR 0xFFC00C00 /* DMA2 Channel 0 Next Descripter Ptr Reg */ +#define DMA2_0_START_ADDR 0xFFC00C04 /* DMA2 Channel 0 Start Address */ +#define DMA2_0_X_COUNT 0xFFC00C10 /* DMA2 Channel 0 Inner Loop Count */ +#define DMA2_0_Y_COUNT 0xFFC00C18 /* DMA2 Channel 0 Outer Loop Count */ +#define DMA2_0_X_MODIFY 0xFFC00C14 /* DMA2 Channel 0 Inner Loop Addr Increment */ +#define DMA2_0_Y_MODIFY 0xFFC00C1C /* DMA2 Channel 0 Outer Loop Addr Increment */ +#define DMA2_0_CURR_DESC_PTR 0xFFC00C20 /* DMA2 Channel 0 Current Descriptor Pointer */ +#define DMA2_0_CURR_ADDR 0xFFC00C24 /* DMA2 Channel 0 Current Address Pointer */ +#define DMA2_0_CURR_X_COUNT 0xFFC00C30 /* DMA2 Channel 0 Current Inner Loop Count */ +#define DMA2_0_CURR_Y_COUNT 0xFFC00C38 /* DMA2 Channel 0 Current Outer Loop Count */ +#define DMA2_0_IRQ_STATUS 0xFFC00C28 /* DMA2 Channel 0 Interrupt Status Register */ +#define DMA2_0_PERIPHERAL_MAP 0xFFC00C2C /* DMA2 Channel 0 Peripheral Map Register */ + +#define DMA2_1_CONFIG 0xFFC00C48 /* DMA2 Channel 1 Configuration register */ +#define DMA2_1_NEXT_DESC_PTR 0xFFC00C40 /* DMA2 Channel 1 Next Descripter Ptr Reg */ +#define DMA2_1_START_ADDR 0xFFC00C44 /* DMA2 Channel 1 Start Address */ +#define DMA2_1_X_COUNT 0xFFC00C50 /* DMA2 Channel 1 Inner Loop Count */ +#define DMA2_1_Y_COUNT 0xFFC00C58 /* DMA2 Channel 1 Outer Loop Count */ +#define DMA2_1_X_MODIFY 0xFFC00C54 /* DMA2 Channel 1 Inner Loop Addr Increment */ +#define DMA2_1_Y_MODIFY 0xFFC00C5C /* DMA2 Channel 1 Outer Loop Addr Increment */ +#define DMA2_1_CURR_DESC_PTR 0xFFC00C60 /* DMA2 Channel 1 Current Descriptor Pointer */ +#define DMA2_1_CURR_ADDR 0xFFC00C64 /* DMA2 Channel 1 Current Address Pointer */ +#define DMA2_1_CURR_X_COUNT 0xFFC00C70 /* DMA2 Channel 1 Current Inner Loop Count */ +#define DMA2_1_CURR_Y_COUNT 0xFFC00C78 /* DMA2 Channel 1 Current Outer Loop Count */ +#define DMA2_1_IRQ_STATUS 0xFFC00C68 /* DMA2 Channel 1 Interrupt Status Register */ +#define DMA2_1_PERIPHERAL_MAP 0xFFC00C6C /* DMA2 Channel 1 Peripheral Map Register */ + +#define DMA2_2_CONFIG 0xFFC00C88 /* DMA2 Channel 2 Configuration register */ +#define DMA2_2_NEXT_DESC_PTR 0xFFC00C80 /* DMA2 Channel 2 Next Descripter Ptr Reg */ +#define DMA2_2_START_ADDR 0xFFC00C84 /* DMA2 Channel 2 Start Address */ +#define DMA2_2_X_COUNT 0xFFC00C90 /* DMA2 Channel 2 Inner Loop Count */ +#define DMA2_2_Y_COUNT 0xFFC00C98 /* DMA2 Channel 2 Outer Loop Count */ +#define DMA2_2_X_MODIFY 0xFFC00C94 /* DMA2 Channel 2 Inner Loop Addr Increment */ +#define DMA2_2_Y_MODIFY 0xFFC00C9C /* DMA2 Channel 2 Outer Loop Addr Increment */ +#define DMA2_2_CURR_DESC_PTR 0xFFC00CA0 /* DMA2 Channel 2 Current Descriptor Pointer */ +#define DMA2_2_CURR_ADDR 0xFFC00CA4 /* DMA2 Channel 2 Current Address Pointer */ +#define DMA2_2_CURR_X_COUNT 0xFFC00CB0 /* DMA2 Channel 2 Current Inner Loop Count */ +#define DMA2_2_CURR_Y_COUNT 0xFFC00CB8 /* DMA2 Channel 2 Current Outer Loop Count */ +#define DMA2_2_IRQ_STATUS 0xFFC00CA8 /* DMA2 Channel 2 Interrupt Status Register */ +#define DMA2_2_PERIPHERAL_MAP 0xFFC00CAC /* DMA2 Channel 2 Peripheral Map Register */ + +#define DMA2_3_CONFIG 0xFFC00CC8 /* DMA2 Channel 3 Configuration register */ +#define DMA2_3_NEXT_DESC_PTR 0xFFC00CC0 /* DMA2 Channel 3 Next Descripter Ptr Reg */ +#define DMA2_3_START_ADDR 0xFFC00CC4 /* DMA2 Channel 3 Start Address */ +#define DMA2_3_X_COUNT 0xFFC00CD0 /* DMA2 Channel 3 Inner Loop Count */ +#define DMA2_3_Y_COUNT 0xFFC00CD8 /* DMA2 Channel 3 Outer Loop Count */ +#define DMA2_3_X_MODIFY 0xFFC00CD4 /* DMA2 Channel 3 Inner Loop Addr Increment */ +#define DMA2_3_Y_MODIFY 0xFFC00CDC /* DMA2 Channel 3 Outer Loop Addr Increment */ +#define DMA2_3_CURR_DESC_PTR 0xFFC00CE0 /* DMA2 Channel 3 Current Descriptor Pointer */ +#define DMA2_3_CURR_ADDR 0xFFC00CE4 /* DMA2 Channel 3 Current Address Pointer */ +#define DMA2_3_CURR_X_COUNT 0xFFC00CF0 /* DMA2 Channel 3 Current Inner Loop Count */ +#define DMA2_3_CURR_Y_COUNT 0xFFC00CF8 /* DMA2 Channel 3 Current Outer Loop Count */ +#define DMA2_3_IRQ_STATUS 0xFFC00CE8 /* DMA2 Channel 3 Interrupt Status Register */ +#define DMA2_3_PERIPHERAL_MAP 0xFFC00CEC /* DMA2 Channel 3 Peripheral Map Register */ + +#define DMA2_4_CONFIG 0xFFC00D08 /* DMA2 Channel 4 Configuration register */ +#define DMA2_4_NEXT_DESC_PTR 0xFFC00D00 /* DMA2 Channel 4 Next Descripter Ptr Reg */ +#define DMA2_4_START_ADDR 0xFFC00D04 /* DMA2 Channel 4 Start Address */ +#define DMA2_4_X_COUNT 0xFFC00D10 /* DMA2 Channel 4 Inner Loop Count */ +#define DMA2_4_Y_COUNT 0xFFC00D18 /* DMA2 Channel 4 Outer Loop Count */ +#define DMA2_4_X_MODIFY 0xFFC00D14 /* DMA2 Channel 4 Inner Loop Addr Increment */ +#define DMA2_4_Y_MODIFY 0xFFC00D1C /* DMA2 Channel 4 Outer Loop Addr Increment */ +#define DMA2_4_CURR_DESC_PTR 0xFFC00D20 /* DMA2 Channel 4 Current Descriptor Pointer */ +#define DMA2_4_CURR_ADDR 0xFFC00D24 /* DMA2 Channel 4 Current Address Pointer */ +#define DMA2_4_CURR_X_COUNT 0xFFC00D30 /* DMA2 Channel 4 Current Inner Loop Count */ +#define DMA2_4_CURR_Y_COUNT 0xFFC00D38 /* DMA2 Channel 4 Current Outer Loop Count */ +#define DMA2_4_IRQ_STATUS 0xFFC00D28 /* DMA2 Channel 4 Interrupt Status Register */ +#define DMA2_4_PERIPHERAL_MAP 0xFFC00D2C /* DMA2 Channel 4 Peripheral Map Register */ + +#define DMA2_5_CONFIG 0xFFC00D48 /* DMA2 Channel 5 Configuration register */ +#define DMA2_5_NEXT_DESC_PTR 0xFFC00D40 /* DMA2 Channel 5 Next Descripter Ptr Reg */ +#define DMA2_5_START_ADDR 0xFFC00D44 /* DMA2 Channel 5 Start Address */ +#define DMA2_5_X_COUNT 0xFFC00D50 /* DMA2 Channel 5 Inner Loop Count */ +#define DMA2_5_Y_COUNT 0xFFC00D58 /* DMA2 Channel 5 Outer Loop Count */ +#define DMA2_5_X_MODIFY 0xFFC00D54 /* DMA2 Channel 5 Inner Loop Addr Increment */ +#define DMA2_5_Y_MODIFY 0xFFC00D5C /* DMA2 Channel 5 Outer Loop Addr Increment */ +#define DMA2_5_CURR_DESC_PTR 0xFFC00D60 /* DMA2 Channel 5 Current Descriptor Pointer */ +#define DMA2_5_CURR_ADDR 0xFFC00D64 /* DMA2 Channel 5 Current Address Pointer */ +#define DMA2_5_CURR_X_COUNT 0xFFC00D70 /* DMA2 Channel 5 Current Inner Loop Count */ +#define DMA2_5_CURR_Y_COUNT 0xFFC00D78 /* DMA2 Channel 5 Current Outer Loop Count */ +#define DMA2_5_IRQ_STATUS 0xFFC00D68 /* DMA2 Channel 5 Interrupt Status Register */ +#define DMA2_5_PERIPHERAL_MAP 0xFFC00D6C /* DMA2 Channel 5 Peripheral Map Register */ + +#define DMA2_6_CONFIG 0xFFC00D88 /* DMA2 Channel 6 Configuration register */ +#define DMA2_6_NEXT_DESC_PTR 0xFFC00D80 /* DMA2 Channel 6 Next Descripter Ptr Reg */ +#define DMA2_6_START_ADDR 0xFFC00D84 /* DMA2 Channel 6 Start Address */ +#define DMA2_6_X_COUNT 0xFFC00D90 /* DMA2 Channel 6 Inner Loop Count */ +#define DMA2_6_Y_COUNT 0xFFC00D98 /* DMA2 Channel 6 Outer Loop Count */ +#define DMA2_6_X_MODIFY 0xFFC00D94 /* DMA2 Channel 6 Inner Loop Addr Increment */ +#define DMA2_6_Y_MODIFY 0xFFC00D9C /* DMA2 Channel 6 Outer Loop Addr Increment */ +#define DMA2_6_CURR_DESC_PTR 0xFFC00DA0 /* DMA2 Channel 6 Current Descriptor Pointer */ +#define DMA2_6_CURR_ADDR 0xFFC00DA4 /* DMA2 Channel 6 Current Address Pointer */ +#define DMA2_6_CURR_X_COUNT 0xFFC00DB0 /* DMA2 Channel 6 Current Inner Loop Count */ +#define DMA2_6_CURR_Y_COUNT 0xFFC00DB8 /* DMA2 Channel 6 Current Outer Loop Count */ +#define DMA2_6_IRQ_STATUS 0xFFC00DA8 /* DMA2 Channel 6 Interrupt Status Register */ +#define DMA2_6_PERIPHERAL_MAP 0xFFC00DAC /* DMA2 Channel 6 Peripheral Map Register */ + +#define DMA2_7_CONFIG 0xFFC00DC8 /* DMA2 Channel 7 Configuration register */ +#define DMA2_7_NEXT_DESC_PTR 0xFFC00DC0 /* DMA2 Channel 7 Next Descripter Ptr Reg */ +#define DMA2_7_START_ADDR 0xFFC00DC4 /* DMA2 Channel 7 Start Address */ +#define DMA2_7_X_COUNT 0xFFC00DD0 /* DMA2 Channel 7 Inner Loop Count */ +#define DMA2_7_Y_COUNT 0xFFC00DD8 /* DMA2 Channel 7 Outer Loop Count */ +#define DMA2_7_X_MODIFY 0xFFC00DD4 /* DMA2 Channel 7 Inner Loop Addr Increment */ +#define DMA2_7_Y_MODIFY 0xFFC00DDC /* DMA2 Channel 7 Outer Loop Addr Increment */ +#define DMA2_7_CURR_DESC_PTR 0xFFC00DE0 /* DMA2 Channel 7 Current Descriptor Pointer */ +#define DMA2_7_CURR_ADDR 0xFFC00DE4 /* DMA2 Channel 7 Current Address Pointer */ +#define DMA2_7_CURR_X_COUNT 0xFFC00DF0 /* DMA2 Channel 7 Current Inner Loop Count */ +#define DMA2_7_CURR_Y_COUNT 0xFFC00DF8 /* DMA2 Channel 7 Current Outer Loop Count */ +#define DMA2_7_IRQ_STATUS 0xFFC00DE8 /* DMA2 Channel 7 Interrupt Status Register */ +#define DMA2_7_PERIPHERAL_MAP 0xFFC00DEC /* DMA2 Channel 7 Peripheral Map Register */ + +#define DMA2_8_CONFIG 0xFFC00E08 /* DMA2 Channel 8 Configuration register */ +#define DMA2_8_NEXT_DESC_PTR 0xFFC00E00 /* DMA2 Channel 8 Next Descripter Ptr Reg */ +#define DMA2_8_START_ADDR 0xFFC00E04 /* DMA2 Channel 8 Start Address */ +#define DMA2_8_X_COUNT 0xFFC00E10 /* DMA2 Channel 8 Inner Loop Count */ +#define DMA2_8_Y_COUNT 0xFFC00E18 /* DMA2 Channel 8 Outer Loop Count */ +#define DMA2_8_X_MODIFY 0xFFC00E14 /* DMA2 Channel 8 Inner Loop Addr Increment */ +#define DMA2_8_Y_MODIFY 0xFFC00E1C /* DMA2 Channel 8 Outer Loop Addr Increment */ +#define DMA2_8_CURR_DESC_PTR 0xFFC00E20 /* DMA2 Channel 8 Current Descriptor Pointer */ +#define DMA2_8_CURR_ADDR 0xFFC00E24 /* DMA2 Channel 8 Current Address Pointer */ +#define DMA2_8_CURR_X_COUNT 0xFFC00E30 /* DMA2 Channel 8 Current Inner Loop Count */ +#define DMA2_8_CURR_Y_COUNT 0xFFC00E38 /* DMA2 Channel 8 Current Outer Loop Count */ +#define DMA2_8_IRQ_STATUS 0xFFC00E28 /* DMA2 Channel 8 Interrupt Status Register */ +#define DMA2_8_PERIPHERAL_MAP 0xFFC00E2C /* DMA2 Channel 8 Peripheral Map Register */ + +#define DMA2_9_CONFIG 0xFFC00E48 /* DMA2 Channel 9 Configuration register */ +#define DMA2_9_NEXT_DESC_PTR 0xFFC00E40 /* DMA2 Channel 9 Next Descripter Ptr Reg */ +#define DMA2_9_START_ADDR 0xFFC00E44 /* DMA2 Channel 9 Start Address */ +#define DMA2_9_X_COUNT 0xFFC00E50 /* DMA2 Channel 9 Inner Loop Count */ +#define DMA2_9_Y_COUNT 0xFFC00E58 /* DMA2 Channel 9 Outer Loop Count */ +#define DMA2_9_X_MODIFY 0xFFC00E54 /* DMA2 Channel 9 Inner Loop Addr Increment */ +#define DMA2_9_Y_MODIFY 0xFFC00E5C /* DMA2 Channel 9 Outer Loop Addr Increment */ +#define DMA2_9_CURR_DESC_PTR 0xFFC00E60 /* DMA2 Channel 9 Current Descriptor Pointer */ +#define DMA2_9_CURR_ADDR 0xFFC00E64 /* DMA2 Channel 9 Current Address Pointer */ +#define DMA2_9_CURR_X_COUNT 0xFFC00E70 /* DMA2 Channel 9 Current Inner Loop Count */ +#define DMA2_9_CURR_Y_COUNT 0xFFC00E78 /* DMA2 Channel 9 Current Outer Loop Count */ +#define DMA2_9_IRQ_STATUS 0xFFC00E68 /* DMA2 Channel 9 Interrupt Status Register */ +#define DMA2_9_PERIPHERAL_MAP 0xFFC00E6C /* DMA2 Channel 9 Peripheral Map Register */ + +#define DMA2_10_CONFIG 0xFFC00E88 /* DMA2 Channel 10 Configuration register */ +#define DMA2_10_NEXT_DESC_PTR 0xFFC00E80 /* DMA2 Channel 10 Next Descripter Ptr Reg */ +#define DMA2_10_START_ADDR 0xFFC00E84 /* DMA2 Channel 10 Start Address */ +#define DMA2_10_X_COUNT 0xFFC00E90 /* DMA2 Channel 10 Inner Loop Count */ +#define DMA2_10_Y_COUNT 0xFFC00E98 /* DMA2 Channel 10 Outer Loop Count */ +#define DMA2_10_X_MODIFY 0xFFC00E94 /* DMA2 Channel 10 Inner Loop Addr Increment */ +#define DMA2_10_Y_MODIFY 0xFFC00E9C /* DMA2 Channel 10 Outer Loop Addr Increment */ +#define DMA2_10_CURR_DESC_PTR 0xFFC00EA0 /* DMA2 Channel 10 Current Descriptor Pointer */ +#define DMA2_10_CURR_ADDR 0xFFC00EA4 /* DMA2 Channel 10 Current Address Pointer */ +#define DMA2_10_CURR_X_COUNT 0xFFC00EB0 /* DMA2 Channel 10 Current Inner Loop Count */ +#define DMA2_10_CURR_Y_COUNT 0xFFC00EB8 /* DMA2 Channel 10 Current Outer Loop Count */ +#define DMA2_10_IRQ_STATUS 0xFFC00EA8 /* DMA2 Channel 10 Interrupt Status Register */ +#define DMA2_10_PERIPHERAL_MAP 0xFFC00EAC /* DMA2 Channel 10 Peripheral Map Register */ + +#define DMA2_11_CONFIG 0xFFC00EC8 /* DMA2 Channel 11 Configuration register */ +#define DMA2_11_NEXT_DESC_PTR 0xFFC00EC0 /* DMA2 Channel 11 Next Descripter Ptr Reg */ +#define DMA2_11_START_ADDR 0xFFC00EC4 /* DMA2 Channel 11 Start Address */ +#define DMA2_11_X_COUNT 0xFFC00ED0 /* DMA2 Channel 11 Inner Loop Count */ +#define DMA2_11_Y_COUNT 0xFFC00ED8 /* DMA2 Channel 11 Outer Loop Count */ +#define DMA2_11_X_MODIFY 0xFFC00ED4 /* DMA2 Channel 11 Inner Loop Addr Increment */ +#define DMA2_11_Y_MODIFY 0xFFC00EDC /* DMA2 Channel 11 Outer Loop Addr Increment */ +#define DMA2_11_CURR_DESC_PTR 0xFFC00EE0 /* DMA2 Channel 11 Current Descriptor Pointer */ +#define DMA2_11_CURR_ADDR 0xFFC00EE4 /* DMA2 Channel 11 Current Address Pointer */ +#define DMA2_11_CURR_X_COUNT 0xFFC00EF0 /* DMA2 Channel 11 Current Inner Loop Count */ +#define DMA2_11_CURR_Y_COUNT 0xFFC00EF8 /* DMA2 Channel 11 Current Outer Loop Count */ +#define DMA2_11_IRQ_STATUS 0xFFC00EE8 /* DMA2 Channel 11 Interrupt Status Register */ +#define DMA2_11_PERIPHERAL_MAP 0xFFC00EEC /* DMA2 Channel 11 Peripheral Map Register */ + +/* Memory DMA2 Controller registers (0xFFC0 0E80-0xFFC0 0FFF) */ +#define MDMA2_D0_CONFIG 0xFFC00F08 /* MemDMA2 Stream 0 Destination Configuration register */ +#define MDMA2_D0_NEXT_DESC_PTR 0xFFC00F00 /* MemDMA2 Stream 0 Destination Next Descriptor Ptr Reg */ +#define MDMA2_D0_START_ADDR 0xFFC00F04 /* MemDMA2 Stream 0 Destination Start Address */ +#define MDMA2_D0_X_COUNT 0xFFC00F10 /* MemDMA2 Stream 0 Dest Inner-Loop Count register */ +#define MDMA2_D0_Y_COUNT 0xFFC00F18 /* MemDMA2 Stream 0 Dest Outer-Loop Count register */ +#define MDMA2_D0_X_MODIFY 0xFFC00F14 /* MemDMA2 Stream 0 Dest Inner-Loop Address-Increment */ +#define MDMA2_D0_Y_MODIFY 0xFFC00F1C /* MemDMA2 Stream 0 Dest Outer-Loop Address-Increment */ +#define MDMA2_D0_CURR_DESC_PTR 0xFFC00F20 /* MemDMA2 Stream 0 Dest Current Descriptor Ptr reg */ +#define MDMA2_D0_CURR_ADDR 0xFFC00F24 /* MemDMA2 Stream 0 Destination Current Address */ +#define MDMA2_D0_CURR_X_COUNT 0xFFC00F30 /* MemDMA2 Stream 0 Dest Current Inner-Loop Count reg */ +#define MDMA2_D0_CURR_Y_COUNT 0xFFC00F38 /* MemDMA2 Stream 0 Dest Current Outer-Loop Count reg */ +#define MDMA2_D0_IRQ_STATUS 0xFFC00F28 /* MemDMA2 Stream 0 Dest Interrupt/Status Register */ +#define MDMA2_D0_PERIPHERAL_MAP 0xFFC00F2C /* MemDMA2 Stream 0 Destination Peripheral Map register */ + +#define MDMA2_S0_CONFIG 0xFFC00F48 /* MemDMA2 Stream 0 Source Configuration register */ +#define MDMA2_S0_NEXT_DESC_PTR 0xFFC00F40 /* MemDMA2 Stream 0 Source Next Descriptor Ptr Reg */ +#define MDMA2_S0_START_ADDR 0xFFC00F44 /* MemDMA2 Stream 0 Source Start Address */ +#define MDMA2_S0_X_COUNT 0xFFC00F50 /* MemDMA2 Stream 0 Source Inner-Loop Count register */ +#define MDMA2_S0_Y_COUNT 0xFFC00F58 /* MemDMA2 Stream 0 Source Outer-Loop Count register */ +#define MDMA2_S0_X_MODIFY 0xFFC00F54 /* MemDMA2 Stream 0 Src Inner-Loop Addr-Increment reg */ +#define MDMA2_S0_Y_MODIFY 0xFFC00F5C /* MemDMA2 Stream 0 Src Outer-Loop Addr-Increment reg */ +#define MDMA2_S0_CURR_DESC_PTR 0xFFC00F60 /* MemDMA2 Stream 0 Source Current Descriptor Ptr reg */ +#define MDMA2_S0_CURR_ADDR 0xFFC00F64 /* MemDMA2 Stream 0 Source Current Address */ +#define MDMA2_S0_CURR_X_COUNT 0xFFC00F70 /* MemDMA2 Stream 0 Src Current Inner-Loop Count reg */ +#define MDMA2_S0_CURR_Y_COUNT 0xFFC00F78 /* MemDMA2 Stream 0 Src Current Outer-Loop Count reg */ +#define MDMA2_S0_IRQ_STATUS 0xFFC00F68 /* MemDMA2 Stream 0 Source Interrupt/Status Register */ +#define MDMA2_S0_PERIPHERAL_MAP 0xFFC00F6C /* MemDMA2 Stream 0 Source Peripheral Map register */ + +#define MDMA2_D1_CONFIG 0xFFC00F88 /* MemDMA2 Stream 1 Destination Configuration register */ +#define MDMA2_D1_NEXT_DESC_PTR 0xFFC00F80 /* MemDMA2 Stream 1 Destination Next Descriptor Ptr Reg */ +#define MDMA2_D1_START_ADDR 0xFFC00F84 /* MemDMA2 Stream 1 Destination Start Address */ +#define MDMA2_D1_X_COUNT 0xFFC00F90 /* MemDMA2 Stream 1 Dest Inner-Loop Count register */ +#define MDMA2_D1_Y_COUNT 0xFFC00F98 /* MemDMA2 Stream 1 Dest Outer-Loop Count register */ +#define MDMA2_D1_X_MODIFY 0xFFC00F94 /* MemDMA2 Stream 1 Dest Inner-Loop Address-Increment */ +#define MDMA2_D1_Y_MODIFY 0xFFC00F9C /* MemDMA2 Stream 1 Dest Outer-Loop Address-Increment */ +#define MDMA2_D1_CURR_DESC_PTR 0xFFC00FA0 /* MemDMA2 Stream 1 Destination Current Descriptor Ptr */ +#define MDMA2_D1_CURR_ADDR 0xFFC00FA4 /* MemDMA2 Stream 1 Destination Current Address reg */ +#define MDMA2_D1_CURR_X_COUNT 0xFFC00FB0 /* MemDMA2 Stream 1 Dest Current Inner-Loop Count reg */ +#define MDMA2_D1_CURR_Y_COUNT 0xFFC00FB8 /* MemDMA2 Stream 1 Dest Current Outer-Loop Count reg */ +#define MDMA2_D1_IRQ_STATUS 0xFFC00FA8 /* MemDMA2 Stream 1 Destination Interrupt/Status Reg */ +#define MDMA2_D1_PERIPHERAL_MAP 0xFFC00FAC /* MemDMA2 Stream 1 Destination Peripheral Map register */ + +#define MDMA2_S1_CONFIG 0xFFC00FC8 /* MemDMA2 Stream 1 Source Configuration register */ +#define MDMA2_S1_NEXT_DESC_PTR 0xFFC00FC0 /* MemDMA2 Stream 1 Source Next Descriptor Ptr Reg */ +#define MDMA2_S1_START_ADDR 0xFFC00FC4 /* MemDMA2 Stream 1 Source Start Address */ +#define MDMA2_S1_X_COUNT 0xFFC00FD0 /* MemDMA2 Stream 1 Source Inner-Loop Count register */ +#define MDMA2_S1_Y_COUNT 0xFFC00FD8 /* MemDMA2 Stream 1 Source Outer-Loop Count register */ +#define MDMA2_S1_X_MODIFY 0xFFC00FD4 /* MemDMA2 Stream 1 Src Inner-Loop Address-Increment */ +#define MDMA2_S1_Y_MODIFY 0xFFC00FDC /* MemDMA2 Stream 1 Source Outer-Loop Address-Increment */ +#define MDMA2_S1_CURR_DESC_PTR 0xFFC00FE0 /* MemDMA2 Stream 1 Source Current Descriptor Ptr reg */ +#define MDMA2_S1_CURR_ADDR 0xFFC00FE4 /* MemDMA2 Stream 1 Source Current Address */ +#define MDMA2_S1_CURR_X_COUNT 0xFFC00FF0 /* MemDMA2 Stream 1 Source Current Inner-Loop Count */ +#define MDMA2_S1_CURR_Y_COUNT 0xFFC00FF8 /* MemDMA2 Stream 1 Source Current Outer-Loop Count */ +#define MDMA2_S1_IRQ_STATUS 0xFFC00FE8 /* MemDMA2 Stream 1 Source Interrupt/Status Register */ +#define MDMA2_S1_PERIPHERAL_MAP 0xFFC00FEC /* MemDMA2 Stream 1 Source Peripheral Map register */ + +/* Internal Memory DMA Registers (0xFFC0_1800 - 0xFFC0_19FF) */ +#define IMDMA_D0_CONFIG 0xFFC01808 /* IMDMA Stream 0 Destination Configuration */ +#define IMDMA_D0_NEXT_DESC_PTR 0xFFC01800 /* IMDMA Stream 0 Destination Next Descriptor Ptr Reg */ +#define IMDMA_D0_START_ADDR 0xFFC01804 /* IMDMA Stream 0 Destination Start Address */ +#define IMDMA_D0_X_COUNT 0xFFC01810 /* IMDMA Stream 0 Destination Inner-Loop Count */ +#define IMDMA_D0_Y_COUNT 0xFFC01818 /* IMDMA Stream 0 Destination Outer-Loop Count */ +#define IMDMA_D0_X_MODIFY 0xFFC01814 /* IMDMA Stream 0 Dest Inner-Loop Address-Increment */ +#define IMDMA_D0_Y_MODIFY 0xFFC0181C /* IMDMA Stream 0 Dest Outer-Loop Address-Increment */ +#define IMDMA_D0_CURR_DESC_PTR 0xFFC01820 /* IMDMA Stream 0 Destination Current Descriptor Ptr */ +#define IMDMA_D0_CURR_ADDR 0xFFC01824 /* IMDMA Stream 0 Destination Current Address */ +#define IMDMA_D0_CURR_X_COUNT 0xFFC01830 /* IMDMA Stream 0 Destination Current Inner-Loop Count */ +#define IMDMA_D0_CURR_Y_COUNT 0xFFC01838 /* IMDMA Stream 0 Destination Current Outer-Loop Count */ +#define IMDMA_D0_IRQ_STATUS 0xFFC01828 /* IMDMA Stream 0 Destination Interrupt/Status */ + +#define IMDMA_S0_CONFIG 0xFFC01848 /* IMDMA Stream 0 Source Configuration */ +#define IMDMA_S0_NEXT_DESC_PTR 0xFFC01840 /* IMDMA Stream 0 Source Next Descriptor Ptr Reg */ +#define IMDMA_S0_START_ADDR 0xFFC01844 /* IMDMA Stream 0 Source Start Address */ +#define IMDMA_S0_X_COUNT 0xFFC01850 /* IMDMA Stream 0 Source Inner-Loop Count */ +#define IMDMA_S0_Y_COUNT 0xFFC01858 /* IMDMA Stream 0 Source Outer-Loop Count */ +#define IMDMA_S0_X_MODIFY 0xFFC01854 /* IMDMA Stream 0 Source Inner-Loop Address-Increment */ +#define IMDMA_S0_Y_MODIFY 0xFFC0185C /* IMDMA Stream 0 Source Outer-Loop Address-Increment */ +#define IMDMA_S0_CURR_DESC_PTR 0xFFC01860 /* IMDMA Stream 0 Source Current Descriptor Ptr reg */ +#define IMDMA_S0_CURR_ADDR 0xFFC01864 /* IMDMA Stream 0 Source Current Address */ +#define IMDMA_S0_CURR_X_COUNT 0xFFC01870 /* IMDMA Stream 0 Source Current Inner-Loop Count */ +#define IMDMA_S0_CURR_Y_COUNT 0xFFC01878 /* IMDMA Stream 0 Source Current Outer-Loop Count */ +#define IMDMA_S0_IRQ_STATUS 0xFFC01868 /* IMDMA Stream 0 Source Interrupt/Status */ + +#define IMDMA_D1_CONFIG 0xFFC01888 /* IMDMA Stream 1 Destination Configuration */ +#define IMDMA_D1_NEXT_DESC_PTR 0xFFC01880 /* IMDMA Stream 1 Destination Next Descriptor Ptr Reg */ +#define IMDMA_D1_START_ADDR 0xFFC01884 /* IMDMA Stream 1 Destination Start Address */ +#define IMDMA_D1_X_COUNT 0xFFC01890 /* IMDMA Stream 1 Destination Inner-Loop Count */ +#define IMDMA_D1_Y_COUNT 0xFFC01898 /* IMDMA Stream 1 Destination Outer-Loop Count */ +#define IMDMA_D1_X_MODIFY 0xFFC01894 /* IMDMA Stream 1 Dest Inner-Loop Address-Increment */ +#define IMDMA_D1_Y_MODIFY 0xFFC0189C /* IMDMA Stream 1 Dest Outer-Loop Address-Increment */ +#define IMDMA_D1_CURR_DESC_PTR 0xFFC018A0 /* IMDMA Stream 1 Destination Current Descriptor Ptr */ +#define IMDMA_D1_CURR_ADDR 0xFFC018A4 /* IMDMA Stream 1 Destination Current Address */ +#define IMDMA_D1_CURR_X_COUNT 0xFFC018B0 /* IMDMA Stream 1 Destination Current Inner-Loop Count */ +#define IMDMA_D1_CURR_Y_COUNT 0xFFC018B8 /* IMDMA Stream 1 Destination Current Outer-Loop Count */ +#define IMDMA_D1_IRQ_STATUS 0xFFC018A8 /* IMDMA Stream 1 Destination Interrupt/Status */ + +#define IMDMA_S1_CONFIG 0xFFC018C8 /* IMDMA Stream 1 Source Configuration */ +#define IMDMA_S1_NEXT_DESC_PTR 0xFFC018C0 /* IMDMA Stream 1 Source Next Descriptor Ptr Reg */ +#define IMDMA_S1_START_ADDR 0xFFC018C4 /* IMDMA Stream 1 Source Start Address */ +#define IMDMA_S1_X_COUNT 0xFFC018D0 /* IMDMA Stream 1 Source Inner-Loop Count */ +#define IMDMA_S1_Y_COUNT 0xFFC018D8 /* IMDMA Stream 1 Source Outer-Loop Count */ +#define IMDMA_S1_X_MODIFY 0xFFC018D4 /* IMDMA Stream 1 Source Inner-Loop Address-Increment */ +#define IMDMA_S1_Y_MODIFY 0xFFC018DC /* IMDMA Stream 1 Source Outer-Loop Address-Increment */ +#define IMDMA_S1_CURR_DESC_PTR 0xFFC018E0 /* IMDMA Stream 1 Source Current Descriptor Ptr reg */ +#define IMDMA_S1_CURR_ADDR 0xFFC018E4 /* IMDMA Stream 1 Source Current Address */ +#define IMDMA_S1_CURR_X_COUNT 0xFFC018F0 /* IMDMA Stream 1 Source Current Inner-Loop Count */ +#define IMDMA_S1_CURR_Y_COUNT 0xFFC018F8 /* IMDMA Stream 1 Source Current Outer-Loop Count */ +#define IMDMA_S1_IRQ_STATUS 0xFFC018E8 /* IMDMA Stream 1 Source Interrupt/Status */ + +/* + * System MMR Register Bits + */ + +/* PLL AND RESET MASKS */ + +/* PLL_CTL Masks */ +#define PLL_CLKIN 0x00000000 /* Pass CLKIN to PLL */ +#define PLL_CLKIN_DIV2 0x00000001 /* Pass CLKIN/2 to PLL */ +#define PLL_OFF 0x00000002 /* Shut off PLL clocks */ +#define STOPCK_OFF 0x00000008 /* Core clock off */ +#define PDWN 0x00000020 /* Put the PLL in a Deep Sleep state */ +#define BYPASS 0x00000100 /* Bypass the PLL */ + +/* PLL_DIV Masks */ + +#define SCLK_DIV(x) (x) /* SCLK = VCO / x */ + +#define CCLK_DIV1 0x00000000 /* CCLK = VCO / 1 */ +#define CCLK_DIV2 0x00000010 /* CCLK = VCO / 2 */ +#define CCLK_DIV4 0x00000020 /* CCLK = VCO / 4 */ +#define CCLK_DIV8 0x00000030 /* CCLK = VCO / 8 */ + +/* SWRST Mask */ +#define SYSTEM_RESET 0x00000007 /* Initiates a system software reset */ +#define SWRST_DBL_FAULT_B 0x00000800 /* SWRST Core B Double Fault */ +#define SWRST_DBL_FAULT_A 0x00001000 /* SWRST Core A Double Fault */ +#define SWRST_WDT_B 0x00002000 /* SWRST Watchdog B */ +#define SWRST_WDT_A 0x00004000 /* SWRST Watchdog A */ +#define SWRST_OCCURRED 0x00008000 /* SWRST Status */ + +/* + * SYSTEM INTERRUPT CONTROLLER MASKS + * SICu_IARv Masks + * u = A or B + * v = 0 to 7 + * w = 0 or 1 + + * Per_number = 0 to 63 + * IVG_number = 7 to 15 + * Peripheral #Per_number assigned IVG #IVG_number + * Usage: + * r0.l = lo(Peripheral_IVG(62, 10)); + * r0.h = hi(Peripheral_IVG(62, 10)); + */ +#define Peripheral_IVG(Per_number, IVG_number) \ + ( (IVG_number) -7) << ( ((Per_number)%8) *4) + +/* SICx_IMASKw Masks */ +/* masks are 32 bit wide, so two writes reguired for "64 bit" wide registers */ +#define SIC_UNMASK_ALL 0x00000000 /* Unmask all peripheral interrupts */ +#define SIC_MASK_ALL 0xFFFFFFFF /* Mask all peripheral interrupts */ +#define SIC_MASK(x) (1 << (x)) /* Mask Peripheral #x interrupt */ +#define SIC_UNMASK(x) (0xFFFFFFFF ^ (1 << (x)))/* Unmask Peripheral #x interrupt */ + +/* SIC_IWR Masks */ +#define IWR_DISABLE_ALL 0x00000000 /* Wakeup Disable all peripherals */ +#define IWR_ENABLE_ALL 0xFFFFFFFF /* Wakeup Enable all peripherals */ +/* x = pos 0 to 31, for 32-63 use value-32 */ +#define IWR_ENABLE(x) (1 << (x)) /* Wakeup Enable Peripheral #x */ +/* Wakeup Disable Peripheral #x */ +#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << (x))) + +/* + * WATCHDOG TIMER MASKS + */ + +/* Watchdog Timer WDOG_CTL Register */ +#define WDOGA_CTL 0xFFC00200 +#define WDOGA_CNT 0xFFC00204 +#define WDOGA_STAT 0xFFC00208 +#define WDOGB_CTL 0xFFC01200 +#define WDOGB_CNT 0xFFC01204 +#define WDOGB_STAT 0xFFC01208 +#define ICTL(x) ((x<<1) & 0x0006) +#define ENABLE_RESET 0x00000000 /* Set Watchdog Timer to generate reset */ +#define ENABLE_NMI 0x00000002 /* Set Watchdog Timer to generate non-maskable interrupt */ +#define ENABLE_GPI 0x00000004 /* Set Watchdog Timer to generate general-purpose interrupt */ +#define DISABLE_EVT 0x00000006 /* Disable Watchdog Timer interrupts */ + +#define TMR_EN 0x0000 +#define TMR_DIS 0x0AD0 +#define TRO 0x8000 + +#define ICTL_P0 0x01 +#define ICTL_P1 0x02 +#define TRO_P 0x0F + +/* + * UART CONTROLLER MASKS + */ + +/* UART_LCR Register */ + +#define DLAB 0x80 +#define SB 0x40 +#define STP 0x20 +#define EPS 0x10 +#define PEN 0x08 +#define STB 0x04 +#define WLS(x) ((x-5) & 0x03) + +#define DLAB_P 0x07 +#define SB_P 0x06 +#define STP_P 0x05 +#define EPS_P 0x04 +#define PEN_P 0x03 +#define STB_P 0x02 +#define WLS_P1 0x01 +#define WLS_P0 0x00 + +/* UART_MCR Register */ +#define LOOP_ENA 0x10 +#define LOOP_ENA_P 0x04 + +/* UART_LSR Register */ +#define TEMT 0x40 +#define THRE 0x20 +#define BI 0x10 +#define FE 0x08 +#define PE 0x04 +#define OE 0x02 +#define DR 0x01 + +#define TEMP_P 0x06 +#define THRE_P 0x05 +#define BI_P 0x04 +#define FE_P 0x03 +#define PE_P 0x02 +#define OE_P 0x01 +#define DR_P 0x00 + +/* UART_IER Register */ +#define ELSI 0x04 +#define ETBEI 0x02 +#define ERBFI 0x01 + +#define ELSI_P 0x02 +#define ETBEI_P 0x01 +#define ERBFI_P 0x00 + +/* UART_IIR Register */ +#define STATUS(x) ((x << 1) & 0x06) +#define NINT 0x01 +#define STATUS_P1 0x02 +#define STATUS_P0 0x01 +#define NINT_P 0x00 + +/* UART_GCTL Register */ +#define FFE 0x20 +#define FPE 0x10 +#define RPOLC 0x08 +#define TPOLC 0x04 +#define IREN 0x02 +#define UCEN 0x01 + +#define FFE_P 0x05 +#define FPE_P 0x04 +#define RPOLC_P 0x03 +#define TPOLC_P 0x02 +#define IREN_P 0x01 +#define UCEN_P 0x00 + +/* + * SERIAL PORT MASKS + */ + +/* SPORTx_TCR1 Masks */ +#define TSPEN 0x0001 /* TX enable */ +#define ITCLK 0x0002 /* Internal TX Clock Select */ +#define TDTYPE 0x000C /* TX Data Formatting Select */ +#define TLSBIT 0x0010 /* TX Bit Order */ +#define ITFS 0x0200 /* Internal TX Frame Sync Select */ +#define TFSR 0x0400 /* TX Frame Sync Required Select */ +#define DITFS 0x0800 /* Data Independent TX Frame Sync Select */ +#define LTFS 0x1000 /* Low TX Frame Sync Select */ +#define LATFS 0x2000 /* Late TX Frame Sync Select */ +#define TCKFE 0x4000 /* TX Clock Falling Edge Select */ + +/* SPORTx_TCR2 Masks */ +#define SLEN 0x001F /* TX Word Length */ +#define TXSE 0x0100 /* TX Secondary Enable */ +#define TSFSE 0x0200 /* TX Stereo Frame Sync Enable */ +#define TRFST 0x0400 /* TX Right-First Data Order */ + +/* SPORTx_RCR1 Masks */ +#define RSPEN 0x0001 /* RX enable */ +#define IRCLK 0x0002 /* Internal RX Clock Select */ +#define RDTYPE 0x000C /* RX Data Formatting Select */ +#define RULAW 0x0008 /* u-Law enable */ +#define RALAW 0x000C /* A-Law enable */ +#define RLSBIT 0x0010 /* RX Bit Order */ +#define IRFS 0x0200 /* Internal RX Frame Sync Select */ +#define RFSR 0x0400 /* RX Frame Sync Required Select */ +#define LRFS 0x1000 /* Low RX Frame Sync Select */ +#define LARFS 0x2000 /* Late RX Frame Sync Select */ +#define RCKFE 0x4000 /* RX Clock Falling Edge Select */ + +/* SPORTx_RCR2 Masks */ +#define SLEN 0x001F /* RX Word Length */ +#define RXSE 0x0100 /* RX Secondary Enable */ +#define RSFSE 0x0200 /* RX Stereo Frame Sync Enable */ +#define RRFST 0x0400 /* Right-First Data Order */ + +/* SPORTx_STAT Masks */ +#define RXNE 0x0001 /* RX FIFO Not Empty Status */ +#define RUVF 0x0002 /* RX Underflow Status */ +#define ROVF 0x0004 /* RX Overflow Status */ +#define TXF 0x0008 /* TX FIFO Full Status */ +#define TUVF 0x0010 /* TX Underflow Status */ +#define TOVF 0x0020 /* TX Overflow Status */ +#define TXHRE 0x0040 /* TX Hold Register Empty */ + +/* SPORTx_MCMC1 Masks */ +#define WSIZE 0x0000F000 /* Multichannel Window Size Field */ +#define WOFF 0x000003FF /* Multichannel Window Offset Field */ + +/* SPORTx_MCMC2 Masks */ +#define MCCRM 0x00000003 /* Multichannel Clock Recovery Mode */ +#define MCDTXPE 0x00000004 /* Multichannel DMA Transmit Packing */ +#define MCDRXPE 0x00000008 /* Multichannel DMA Receive Packing */ +#define MCMEN 0x00000010 /* Multichannel Frame Mode Enable */ +#define FSDR 0x00000080 /* Multichannel Frame Sync to Data Relationship */ +#define MFD 0x0000F000 /* Multichannel Frame Delay */ + +/* + * PARALLEL PERIPHERAL INTERFACE (PPI) MASKS + */ + +/* PPI_CONTROL Masks */ +#define PORT_EN 0x00000001 /* PPI Port Enable */ +#define PORT_DIR 0x00000002 /* PPI Port Direction */ +#define XFR_TYPE 0x0000000C /* PPI Transfer Type */ +#define PORT_CFG 0x00000030 /* PPI Port Configuration */ +#define FLD_SEL 0x00000040 /* PPI Active Field Select */ +#define PACK_EN 0x00000080 /* PPI Packing Mode */ +#define DMA32 0x00000100 /* PPI 32-bit DMA Enable */ +#define SKIP_EN 0x00000200 /* PPI Skip Element Enable */ +#define SKIP_EO 0x00000400 /* PPI Skip Even/Odd Elements */ +#define DLENGTH 0x00003800 /* PPI Data Length */ +#define DLEN_8 0x0 /* PPI Data Length mask for DLEN=8 */ +#define DLEN(x) (((x-9) & 0x07) << 11) /* PPI Data Length (only works for x=10-->x=16) */ +#define POL 0x0000C000 /* PPI Signal Polarities */ + +/* PPI_STATUS Masks */ +#define FLD 0x00000400 /* Field Indicator */ +#define FT_ERR 0x00000800 /* Frame Track Error */ +#define OVR 0x00001000 /* FIFO Overflow Error */ +#define UNDR 0x00002000 /* FIFO Underrun Error */ +#define ERR_DET 0x00004000 /* Error Detected Indicator */ +#define ERR_NCOR 0x00008000 /* Error Not Corrected Indicator */ + +/* + * DMA CONTROLLER MASKS + */ + +/* DMAx_CONFIG, MDMA_yy_CONFIG, IMDMA_yy_CONFIG Masks */ +#define DMAEN 0x00000001 /* Channel Enable */ +#define WNR 0x00000002 /* Channel Direction (W/R*) */ +#define WDSIZE_8 0x00000000 /* Word Size 8 bits */ +#define WDSIZE_16 0x00000004 /* Word Size 16 bits */ +#define WDSIZE_32 0x00000008 /* Word Size 32 bits */ +#define DMA2D 0x00000010 /* 2D/1D* Mode */ +#define RESTART 0x00000020 /* Restart */ +#define DI_SEL 0x00000040 /* Data Interrupt Select */ +#define DI_EN 0x00000080 /* Data Interrupt Enable */ +#define NDSIZE 0x00000900 /* Next Descriptor Size */ +#define FLOW 0x00007000 /* Flow Control */ + +#define DMAEN_P 0 /* Channel Enable */ +#define WNR_P 1 /* Channel Direction (W/R*) */ +#define DMA2D_P 4 /* 2D/1D* Mode */ +#define RESTART_P 5 /* Restart */ +#define DI_SEL_P 6 /* Data Interrupt Select */ +#define DI_EN_P 7 /* Data Interrupt Enable */ + +/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS, IMDMA_yy_IRQ_STATUS Masks */ + +#define DMA_DONE 0x00000001 /* DMA Done Indicator */ +#define DMA_ERR 0x00000002 /* DMA Error Indicator */ +#define DFETCH 0x00000004 /* Descriptor Fetch Indicator */ +#define DMA_RUN 0x00000008 /* DMA Running Indicator */ + +#define DMA_DONE_P 0 /* DMA Done Indicator */ +#define DMA_ERR_P 1 /* DMA Error Indicator */ +#define DFETCH_P 2 /* Descriptor Fetch Indicator */ +#define DMA_RUN_P 3 /* DMA Running Indicator */ + +/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP, IMDMA_yy_PERIPHERAL_MAP Masks */ + +#define CTYPE 0x00000040 /* DMA Channel Type Indicator */ +#define CTYPE_P 6 /* DMA Channel Type Indicator BIT POSITION */ +#define PCAP8 0x00000080 /* DMA 8-bit Operation Indicator */ +#define PCAP16 0x00000100 /* DMA 16-bit Operation Indicator */ +#define PCAP32 0x00000200 /* DMA 32-bit Operation Indicator */ +#define PCAPWR 0x00000400 /* DMA Write Operation Indicator */ +#define PCAPRD 0x00000800 /* DMA Read Operation Indicator */ +#define PMAP 0x00007000 /* DMA Peripheral Map Field */ + +/* + * GENERAL PURPOSE TIMER MASKS + */ + +/* PWM Timer bit definitions */ + +/* TIMER_ENABLE Register */ +#define TIMEN0 0x0001 +#define TIMEN1 0x0002 +#define TIMEN2 0x0004 +#define TIMEN3 0x0008 +#define TIMEN4 0x0010 +#define TIMEN5 0x0020 +#define TIMEN6 0x0040 +#define TIMEN7 0x0080 +#define TIMEN8 0x0001 +#define TIMEN9 0x0002 +#define TIMEN10 0x0004 +#define TIMEN11 0x0008 + +#define TIMEN0_P 0x00 +#define TIMEN1_P 0x01 +#define TIMEN2_P 0x02 +#define TIMEN3_P 0x03 +#define TIMEN4_P 0x04 +#define TIMEN5_P 0x05 +#define TIMEN6_P 0x06 +#define TIMEN7_P 0x07 +#define TIMEN8_P 0x00 +#define TIMEN9_P 0x01 +#define TIMEN10_P 0x02 +#define TIMEN11_P 0x03 + +/* TIMER_DISABLE Register */ +#define TIMDIS0 0x0001 +#define TIMDIS1 0x0002 +#define TIMDIS2 0x0004 +#define TIMDIS3 0x0008 +#define TIMDIS4 0x0010 +#define TIMDIS5 0x0020 +#define TIMDIS6 0x0040 +#define TIMDIS7 0x0080 +#define TIMDIS8 0x0001 +#define TIMDIS9 0x0002 +#define TIMDIS10 0x0004 +#define TIMDIS11 0x0008 + +#define TIMDIS0_P 0x00 +#define TIMDIS1_P 0x01 +#define TIMDIS2_P 0x02 +#define TIMDIS3_P 0x03 +#define TIMDIS4_P 0x04 +#define TIMDIS5_P 0x05 +#define TIMDIS6_P 0x06 +#define TIMDIS7_P 0x07 +#define TIMDIS8_P 0x00 +#define TIMDIS9_P 0x01 +#define TIMDIS10_P 0x02 +#define TIMDIS11_P 0x03 + +/* TIMER_STATUS Register */ +#define TIMIL0 0x00000001 +#define TIMIL1 0x00000002 +#define TIMIL2 0x00000004 +#define TIMIL3 0x00000008 +#define TIMIL4 0x00010000 +#define TIMIL5 0x00020000 +#define TIMIL6 0x00040000 +#define TIMIL7 0x00080000 +#define TIMIL8 0x0001 +#define TIMIL9 0x0002 +#define TIMIL10 0x0004 +#define TIMIL11 0x0008 +#define TOVL_ERR0 0x00000010 +#define TOVL_ERR1 0x00000020 +#define TOVL_ERR2 0x00000040 +#define TOVL_ERR3 0x00000080 +#define TOVL_ERR4 0x00100000 +#define TOVL_ERR5 0x00200000 +#define TOVL_ERR6 0x00400000 +#define TOVL_ERR7 0x00800000 +#define TOVL_ERR8 0x0010 +#define TOVL_ERR9 0x0020 +#define TOVL_ERR10 0x0040 +#define TOVL_ERR11 0x0080 +#define TRUN0 0x00001000 +#define TRUN1 0x00002000 +#define TRUN2 0x00004000 +#define TRUN3 0x00008000 +#define TRUN4 0x10000000 +#define TRUN5 0x20000000 +#define TRUN6 0x40000000 +#define TRUN7 0x80000000 +#define TRUN8 0x1000 +#define TRUN9 0x2000 +#define TRUN10 0x4000 +#define TRUN11 0x8000 + +#define TIMIL0_P 0x00 +#define TIMIL1_P 0x01 +#define TIMIL2_P 0x02 +#define TIMIL3_P 0x03 +#define TIMIL4_P 0x10 +#define TIMIL5_P 0x11 +#define TIMIL6_P 0x12 +#define TIMIL7_P 0x13 +#define TIMIL8_P 0x00 +#define TIMIL9_P 0x01 +#define TIMIL10_P 0x02 +#define TIMIL11_P 0x03 +#define TOVL_ERR0_P 0x04 +#define TOVL_ERR1_P 0x05 +#define TOVL_ERR2_P 0x06 +#define TOVL_ERR3_P 0x07 +#define TOVL_ERR4_P 0x14 +#define TOVL_ERR5_P 0x15 +#define TOVL_ERR6_P 0x16 +#define TOVL_ERR7_P 0x17 +#define TOVL_ERR8_P 0x04 +#define TOVL_ERR9_P 0x05 +#define TOVL_ERR10_P 0x06 +#define TOVL_ERR11_P 0x07 +#define TRUN0_P 0x0C +#define TRUN1_P 0x0D +#define TRUN2_P 0x0E +#define TRUN3_P 0x0F +#define TRUN4_P 0x1C +#define TRUN5_P 0x1D +#define TRUN6_P 0x1E +#define TRUN7_P 0x1F +#define TRUN8_P 0x0C +#define TRUN9_P 0x0D +#define TRUN10_P 0x0E +#define TRUN11_P 0x0F + +/* TIMERx_CONFIG Registers */ +#define PWM_OUT 0x0001 +#define WDTH_CAP 0x0002 +#define EXT_CLK 0x0003 +#define PULSE_HI 0x0004 +#define PERIOD_CNT 0x0008 +#define IRQ_ENA 0x0010 +#define TIN_SEL 0x0020 +#define OUT_DIS 0x0040 +#define CLK_SEL 0x0080 +#define TOGGLE_HI 0x0100 +#define EMU_RUN 0x0200 +#define ERR_TYP(x) ((x & 0x03) << 14) + +#define TMODE_P0 0x00 +#define TMODE_P1 0x01 +#define PULSE_HI_P 0x02 +#define PERIOD_CNT_P 0x03 +#define IRQ_ENA_P 0x04 +#define TIN_SEL_P 0x05 +#define OUT_DIS_P 0x06 +#define CLK_SEL_P 0x07 +#define TOGGLE_HI_P 0x08 +#define EMU_RUN_P 0x09 +#define ERR_TYP_P0 0x0E +#define ERR_TYP_P1 0x0F + +/* + * PROGRAMMABLE FLAG MASKS + */ + +/* General Purpose IO (0xFFC00700 - 0xFFC007FF) Masks */ +#define PF0 0x0001 +#define PF1 0x0002 +#define PF2 0x0004 +#define PF3 0x0008 +#define PF4 0x0010 +#define PF5 0x0020 +#define PF6 0x0040 +#define PF7 0x0080 +#define PF8 0x0100 +#define PF9 0x0200 +#define PF10 0x0400 +#define PF11 0x0800 +#define PF12 0x1000 +#define PF13 0x2000 +#define PF14 0x4000 +#define PF15 0x8000 + +/* General Purpose IO (0xFFC00700 - 0xFFC007FF) BIT POSITIONS */ +#define PF0_P 0 +#define PF1_P 1 +#define PF2_P 2 +#define PF3_P 3 +#define PF4_P 4 +#define PF5_P 5 +#define PF6_P 6 +#define PF7_P 7 +#define PF8_P 8 +#define PF9_P 9 +#define PF10_P 10 +#define PF11_P 11 +#define PF12_P 12 +#define PF13_P 13 +#define PF14_P 14 +#define PF15_P 15 + +/* + * SERIAL PERIPHERAL INTERFACE (SPI) MASKS + */ + +/* SPI_CTL Masks */ +#define TIMOD 0x00000003 /* Transfer initiation mode and interrupt generation */ +#define SZ 0x00000004 /* Send Zero (=0) or last (=1) word when TDBR empty. */ +#define GM 0x00000008 /* When RDBR full, get more (=1) data or discard (=0) incoming Data */ +#define PSSE 0x00000010 /* Enable (=1) Slave-Select input for Master. */ +#define EMISO 0x00000020 /* Enable (=1) MISO pin as an output. */ +#define SIZE 0x00000100 /* Word length (0 => 8 bits, 1 => 16 bits) */ +#define LSBF 0x00000200 /* Data format (0 => MSB sent/received first 1 => LSB sent/received first) */ + +/* Clock phase (0 => SPICLK starts toggling in middle of xfer, 1 => SPICLK toggles at the beginning of xfer.*/ +#define CPHA 0x00000400 +#define CPOL 0x00000800 /* Clock polarity (0 => active-high, 1 => active-low) */ +#define MSTR 0x00001000 /* Configures SPI as master (=1) or slave (=0) */ +#define WOM 0x00002000 /* Open drain (=1) data output enable (for MOSI and MISO) */ +#define SPE 0x00004000 /* SPI module enable (=1), disable (=0) */ + +/* SPI_FLG Masks */ +#define FLS1 0x00000002 /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */ +#define FLS2 0x00000004 /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */ +#define FLS3 0x00000008 /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */ +#define FLS4 0x00000010 /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */ +#define FLS5 0x00000020 /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */ +#define FLS6 0x00000040 /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */ +#define FLS7 0x00000080 /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */ +#define FLG1 0x00000200 /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */ +#define FLG2 0x00000400 /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */ +#define FLG3 0x00000800 /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */ +#define FLG4 0x00001000 /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */ +#define FLG5 0x00002000 /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */ +#define FLG6 0x00004000 /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */ +#define FLG7 0x00008000 /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */ + +/* SPI_FLG Bit Positions */ +#define FLS1_P 0x00000001 /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */ +#define FLS2_P 0x00000002 /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */ +#define FLS3_P 0x00000003 /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */ +#define FLS4_P 0x00000004 /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */ +#define FLS5_P 0x00000005 /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */ +#define FLS6_P 0x00000006 /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */ +#define FLS7_P 0x00000007 /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */ +#define FLG1_P 0x00000009 /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */ +#define FLG2_P 0x0000000A /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */ +#define FLG3_P 0x0000000B /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */ +#define FLG4_P 0x0000000C /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */ +#define FLG5_P 0x0000000D /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */ +#define FLG6_P 0x0000000E /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */ +#define FLG7_P 0x0000000F /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */ + +/* SPI_STAT Masks */ +#define SPIF 0x00000001 /* Set (=1) when SPI single-word transfer complete */ +#define MODF 0x00000002 /* Set (=1) in a master device when some other device tries to become master */ +#define TXE 0x00000004 /* Set (=1) when transmission occurs with no new data in SPI_TDBR */ +#define TXS 0x00000008 /* SPI_TDBR Data Buffer Status (0=Empty, 1=Full) */ +#define RBSY 0x00000010 /* Set (=1) when data is received with RDBR full */ +#define RXS 0x00000020 /* SPI_RDBR Data Buffer Status (0=Empty, 1=Full) */ +#define TXCOL 0x00000040 /* When set (=1), corrupt data may have been transmitted */ + +/* + * ASYNCHRONOUS MEMORY CONTROLLER MASKS + */ + +/* AMGCTL Masks */ +#define AMCKEN 0x0001 /* Enable CLKOUT */ +#define AMBEN_B0 0x0002 /* Enable Asynchronous Memory Bank 0 only */ +#define AMBEN_B0_B1 0x0004 /* Enable Asynchronous Memory Banks 0 & 1 only */ +#define AMBEN_B0_B1_B2 0x0006 /* Enable Asynchronous Memory Banks 0,/ 1, and 2 */ +#define AMBEN_ALL 0x0008 /* Enable Asynchronous Memory Banks (all) 0, 1, 2, and 3 */ +#define B0_PEN 0x0010 /* Enable 16-bit packing Bank 0 */ +#define B1_PEN 0x0020 /* Enable 16-bit packing Bank 1 */ +#define B2_PEN 0x0040 /* Enable 16-bit packing Bank 2 */ +#define B3_PEN 0x0080 /* Enable 16-bit packing Bank 3 */ + +/* AMGCTL Bit Positions */ +#define AMCKEN_P 0x00000000 /* Enable CLKOUT */ +#define AMBEN_P0 0x00000001 /* Asynchronous Memory Enable, 000 - banks 0-3 disabled, 001 - Bank 0 enabled */ +#define AMBEN_P1 0x00000002 /* Asynchronous Memory Enable, 010 - banks 0&1 enabled, 011 - banks 0-3 enabled */ +#define AMBEN_P2 0x00000003 /* Asynchronous Memory Enable, 1xx - All banks (bank 0, 1, 2, and 3) enabled */ +#define B0_PEN_P 0x004 /* Enable 16-bit packing Bank 0 */ +#define B1_PEN_P 0x005 /* Enable 16-bit packing Bank 1 */ +#define B2_PEN_P 0x006 /* Enable 16-bit packing Bank 2 */ +#define B3_PEN_P 0x007 /* Enable 16-bit packing Bank 3 */ + +/* AMBCTL0 Masks */ +#define B0RDYEN 0x00000001 /* Bank 0 RDY Enable, 0=disable, 1=enable */ +#define B0RDYPOL 0x00000002 /* Bank 0 RDY Active high, 0=active low, 1=active high */ +#define B0TT_1 0x00000004 /* Bank 0 Transition Time from Read to Write = 1 cycle */ +#define B0TT_2 0x00000008 /* Bank 0 Transition Time from Read to Write = 2 cycles */ +#define B0TT_3 0x0000000C /* Bank 0 Transition Time from Read to Write = 3 cycles */ +#define B0TT_4 0x00000000 /* Bank 0 Transition Time from Read to Write = 4 cycles */ +#define B0ST_1 0x00000010 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=1 cycle */ +#define B0ST_2 0x00000020 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=2 cycles */ +#define B0ST_3 0x00000030 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=3 cycles */ +#define B0ST_4 0x00000000 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=4 cycles */ +#define B0HT_1 0x00000040 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 1 cycle */ +#define B0HT_2 0x00000080 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 2 cycles */ +#define B0HT_3 0x000000C0 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 3 cycles */ +#define B0HT_0 0x00000000 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 0 cycles */ +#define B0RAT_1 0x00000100 /* Bank 0 Read Access Time = 1 cycle */ +#define B0RAT_2 0x00000200 /* Bank 0 Read Access Time = 2 cycles */ +#define B0RAT_3 0x00000300 /* Bank 0 Read Access Time = 3 cycles */ +#define B0RAT_4 0x00000400 /* Bank 0 Read Access Time = 4 cycles */ +#define B0RAT_5 0x00000500 /* Bank 0 Read Access Time = 5 cycles */ +#define B0RAT_6 0x00000600 /* Bank 0 Read Access Time = 6 cycles */ +#define B0RAT_7 0x00000700 /* Bank 0 Read Access Time = 7 cycles */ +#define B0RAT_8 0x00000800 /* Bank 0 Read Access Time = 8 cycles */ +#define B0RAT_9 0x00000900 /* Bank 0 Read Access Time = 9 cycles */ +#define B0RAT_10 0x00000A00 /* Bank 0 Read Access Time = 10 cycles */ +#define B0RAT_11 0x00000B00 /* Bank 0 Read Access Time = 11 cycles */ +#define B0RAT_12 0x00000C00 /* Bank 0 Read Access Time = 12 cycles */ +#define B0RAT_13 0x00000D00 /* Bank 0 Read Access Time = 13 cycles */ +#define B0RAT_14 0x00000E00 /* Bank 0 Read Access Time = 14 cycles */ +#define B0RAT_15 0x00000F00 /* Bank 0 Read Access Time = 15 cycles */ +#define B0WAT_1 0x00001000 /* Bank 0 Write Access Time = 1 cycle */ +#define B0WAT_2 0x00002000 /* Bank 0 Write Access Time = 2 cycles */ +#define B0WAT_3 0x00003000 /* Bank 0 Write Access Time = 3 cycles */ +#define B0WAT_4 0x00004000 /* Bank 0 Write Access Time = 4 cycles */ +#define B0WAT_5 0x00005000 /* Bank 0 Write Access Time = 5 cycles */ +#define B0WAT_6 0x00006000 /* Bank 0 Write Access Time = 6 cycles */ +#define B0WAT_7 0x00007000 /* Bank 0 Write Access Time = 7 cycles */ +#define B0WAT_8 0x00008000 /* Bank 0 Write Access Time = 8 cycles */ +#define B0WAT_9 0x00009000 /* Bank 0 Write Access Time = 9 cycles */ +#define B0WAT_10 0x0000A000 /* Bank 0 Write Access Time = 10 cycles */ +#define B0WAT_11 0x0000B000 /* Bank 0 Write Access Time = 11 cycles */ +#define B0WAT_12 0x0000C000 /* Bank 0 Write Access Time = 12 cycles */ +#define B0WAT_13 0x0000D000 /* Bank 0 Write Access Time = 13 cycles */ +#define B0WAT_14 0x0000E000 /* Bank 0 Write Access Time = 14 cycles */ +#define B0WAT_15 0x0000F000 /* Bank 0 Write Access Time = 15 cycles */ +#define B1RDYEN 0x00010000 /* Bank 1 RDY enable, 0=disable, 1=enable */ +#define B1RDYPOL 0x00020000 /* Bank 1 RDY Active high, 0=active low, 1=active high */ +#define B1TT_1 0x00040000 /* Bank 1 Transition Time from Read to Write = 1 cycle */ +#define B1TT_2 0x00080000 /* Bank 1 Transition Time from Read to Write = 2 cycles */ +#define B1TT_3 0x000C0000 /* Bank 1 Transition Time from Read to Write = 3 cycles */ +#define B1TT_4 0x00000000 /* Bank 1 Transition Time from Read to Write = 4 cycles */ +#define B1ST_1 0x00100000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */ +#define B1ST_2 0x00200000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */ +#define B1ST_3 0x00300000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */ +#define B1ST_4 0x00000000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */ +#define B1HT_1 0x00400000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */ +#define B1HT_2 0x00800000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */ +#define B1HT_3 0x00C00000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */ +#define B1HT_0 0x00000000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */ +#define B1RAT_1 0x01000000 /* Bank 1 Read Access Time = 1 cycle */ +#define B1RAT_2 0x02000000 /* Bank 1 Read Access Time = 2 cycles */ +#define B1RAT_3 0x03000000 /* Bank 1 Read Access Time = 3 cycles */ +#define B1RAT_4 0x04000000 /* Bank 1 Read Access Time = 4 cycles */ +#define B1RAT_5 0x05000000 /* Bank 1 Read Access Time = 5 cycles */ +#define B1RAT_6 0x06000000 /* Bank 1 Read Access Time = 6 cycles */ +#define B1RAT_7 0x07000000 /* Bank 1 Read Access Time = 7 cycles */ +#define B1RAT_8 0x08000000 /* Bank 1 Read Access Time = 8 cycles */ +#define B1RAT_9 0x09000000 /* Bank 1 Read Access Time = 9 cycles */ +#define B1RAT_10 0x0A000000 /* Bank 1 Read Access Time = 10 cycles */ +#define B1RAT_11 0x0B000000 /* Bank 1 Read Access Time = 11 cycles */ +#define B1RAT_12 0x0C000000 /* Bank 1 Read Access Time = 12 cycles */ +#define B1RAT_13 0x0D000000 /* Bank 1 Read Access Time = 13 cycles */ +#define B1RAT_14 0x0E000000 /* Bank 1 Read Access Time = 14 cycles */ +#define B1RAT_15 0x0F000000 /* Bank 1 Read Access Time = 15 cycles */ +#define B1WAT_1 0x10000000 /* Bank 1 Write Access Time = 1 cycle */ +#define B1WAT_2 0x20000000 /* Bank 1 Write Access Time = 2 cycles */ +#define B1WAT_3 0x30000000 /* Bank 1 Write Access Time = 3 cycles */ +#define B1WAT_4 0x40000000 /* Bank 1 Write Access Time = 4 cycles */ +#define B1WAT_5 0x50000000 /* Bank 1 Write Access Time = 5 cycles */ +#define B1WAT_6 0x60000000 /* Bank 1 Write Access Time = 6 cycles */ +#define B1WAT_7 0x70000000 /* Bank 1 Write Access Time = 7 cycles */ +#define B1WAT_8 0x80000000 /* Bank 1 Write Access Time = 8 cycles */ +#define B1WAT_9 0x90000000 /* Bank 1 Write Access Time = 9 cycles */ +#define B1WAT_10 0xA0000000 /* Bank 1 Write Access Time = 10 cycles */ +#define B1WAT_11 0xB0000000 /* Bank 1 Write Access Time = 11 cycles */ +#define B1WAT_12 0xC0000000 /* Bank 1 Write Access Time = 12 cycles */ +#define B1WAT_13 0xD0000000 /* Bank 1 Write Access Time = 13 cycles */ +#define B1WAT_14 0xE0000000 /* Bank 1 Write Access Time = 14 cycles */ +#define B1WAT_15 0xF0000000 /* Bank 1 Write Access Time = 15 cycles */ + +/* AMBCTL1 Masks */ +#define B2RDYEN 0x00000001 /* Bank 2 RDY Enable, 0=disable, 1=enable */ +#define B2RDYPOL 0x00000002 /* Bank 2 RDY Active high, 0=active low, 1=active high */ +#define B2TT_1 0x00000004 /* Bank 2 Transition Time from Read to Write = 1 cycle */ +#define B2TT_2 0x00000008 /* Bank 2 Transition Time from Read to Write = 2 cycles */ +#define B2TT_3 0x0000000C /* Bank 2 Transition Time from Read to Write = 3 cycles */ +#define B2TT_4 0x00000000 /* Bank 2 Transition Time from Read to Write = 4 cycles */ +#define B2ST_1 0x00000010 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */ +#define B2ST_2 0x00000020 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */ +#define B2ST_3 0x00000030 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */ +#define B2ST_4 0x00000000 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */ +#define B2HT_1 0x00000040 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */ +#define B2HT_2 0x00000080 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */ +#define B2HT_3 0x000000C0 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */ +#define B2HT_0 0x00000000 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */ +#define B2RAT_1 0x00000100 /* Bank 2 Read Access Time = 1 cycle */ +#define B2RAT_2 0x00000200 /* Bank 2 Read Access Time = 2 cycles */ +#define B2RAT_3 0x00000300 /* Bank 2 Read Access Time = 3 cycles */ +#define B2RAT_4 0x00000400 /* Bank 2 Read Access Time = 4 cycles */ +#define B2RAT_5 0x00000500 /* Bank 2 Read Access Time = 5 cycles */ +#define B2RAT_6 0x00000600 /* Bank 2 Read Access Time = 6 cycles */ +#define B2RAT_7 0x00000700 /* Bank 2 Read Access Time = 7 cycles */ +#define B2RAT_8 0x00000800 /* Bank 2 Read Access Time = 8 cycles */ +#define B2RAT_9 0x00000900 /* Bank 2 Read Access Time = 9 cycles */ +#define B2RAT_10 0x00000A00 /* Bank 2 Read Access Time = 10 cycles */ +#define B2RAT_11 0x00000B00 /* Bank 2 Read Access Time = 11 cycles */ +#define B2RAT_12 0x00000C00 /* Bank 2 Read Access Time = 12 cycles */ +#define B2RAT_13 0x00000D00 /* Bank 2 Read Access Time = 13 cycles */ +#define B2RAT_14 0x00000E00 /* Bank 2 Read Access Time = 14 cycles */ +#define B2RAT_15 0x00000F00 /* Bank 2 Read Access Time = 15 cycles */ +#define B2WAT_1 0x00001000 /* Bank 2 Write Access Time = 1 cycle */ +#define B2WAT_2 0x00002000 /* Bank 2 Write Access Time = 2 cycles */ +#define B2WAT_3 0x00003000 /* Bank 2 Write Access Time = 3 cycles */ +#define B2WAT_4 0x00004000 /* Bank 2 Write Access Time = 4 cycles */ +#define B2WAT_5 0x00005000 /* Bank 2 Write Access Time = 5 cycles */ +#define B2WAT_6 0x00006000 /* Bank 2 Write Access Time = 6 cycles */ +#define B2WAT_7 0x00007000 /* Bank 2 Write Access Time = 7 cycles */ +#define B2WAT_8 0x00008000 /* Bank 2 Write Access Time = 8 cycles */ +#define B2WAT_9 0x00009000 /* Bank 2 Write Access Time = 9 cycles */ +#define B2WAT_10 0x0000A000 /* Bank 2 Write Access Time = 10 cycles */ +#define B2WAT_11 0x0000B000 /* Bank 2 Write Access Time = 11 cycles */ +#define B2WAT_12 0x0000C000 /* Bank 2 Write Access Time = 12 cycles */ +#define B2WAT_13 0x0000D000 /* Bank 2 Write Access Time = 13 cycles */ +#define B2WAT_14 0x0000E000 /* Bank 2 Write Access Time = 14 cycles */ +#define B2WAT_15 0x0000F000 /* Bank 2 Write Access Time = 15 cycles */ +#define B3RDYEN 0x00010000 /* Bank 3 RDY enable, 0=disable, 1=enable */ +#define B3RDYPOL 0x00020000 /* Bank 3 RDY Active high, 0=active low, 1=active high */ +#define B3TT_1 0x00040000 /* Bank 3 Transition Time from Read to Write = 1 cycle */ +#define B3TT_2 0x00080000 /* Bank 3 Transition Time from Read to Write = 2 cycles */ +#define B3TT_3 0x000C0000 /* Bank 3 Transition Time from Read to Write = 3 cycles */ +#define B3TT_4 0x00000000 /* Bank 3 Transition Time from Read to Write = 4 cycles */ +#define B3ST_1 0x00100000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */ +#define B3ST_2 0x00200000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */ +#define B3ST_3 0x00300000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */ +#define B3ST_4 0x00000000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */ +#define B3HT_1 0x00400000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */ +#define B3HT_2 0x00800000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */ +#define B3HT_3 0x00C00000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */ +#define B3HT_0 0x00000000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */ +#define B3RAT_1 0x01000000 /* Bank 3 Read Access Time = 1 cycle */ +#define B3RAT_2 0x02000000 /* Bank 3 Read Access Time = 2 cycles */ +#define B3RAT_3 0x03000000 /* Bank 3 Read Access Time = 3 cycles */ +#define B3RAT_4 0x04000000 /* Bank 3 Read Access Time = 4 cycles */ +#define B3RAT_5 0x05000000 /* Bank 3 Read Access Time = 5 cycles */ +#define B3RAT_6 0x06000000 /* Bank 3 Read Access Time = 6 cycles */ +#define B3RAT_7 0x07000000 /* Bank 3 Read Access Time = 7 cycles */ +#define B3RAT_8 0x08000000 /* Bank 3 Read Access Time = 8 cycles */ +#define B3RAT_9 0x09000000 /* Bank 3 Read Access Time = 9 cycles */ +#define B3RAT_10 0x0A000000 /* Bank 3 Read Access Time = 10 cycles */ +#define B3RAT_11 0x0B000000 /* Bank 3 Read Access Time = 11 cycles */ +#define B3RAT_12 0x0C000000 /* Bank 3 Read Access Time = 12 cycles */ +#define B3RAT_13 0x0D000000 /* Bank 3 Read Access Time = 13 cycles */ +#define B3RAT_14 0x0E000000 /* Bank 3 Read Access Time = 14 cycles */ +#define B3RAT_15 0x0F000000 /* Bank 3 Read Access Time = 15 cycles */ +#define B3WAT_1 0x10000000 /* Bank 3 Write Access Time = 1 cycle */ +#define B3WAT_2 0x20000000 /* Bank 3 Write Access Time = 2 cycles */ +#define B3WAT_3 0x30000000 /* Bank 3 Write Access Time = 3 cycles */ +#define B3WAT_4 0x40000000 /* Bank 3 Write Access Time = 4 cycles */ +#define B3WAT_5 0x50000000 /* Bank 3 Write Access Time = 5 cycles */ +#define B3WAT_6 0x60000000 /* Bank 3 Write Access Time = 6 cycles */ +#define B3WAT_7 0x70000000 /* Bank 3 Write Access Time = 7 cycles */ +#define B3WAT_8 0x80000000 /* Bank 3 Write Access Time = 8 cycles */ +#define B3WAT_9 0x90000000 /* Bank 3 Write Access Time = 9 cycles */ +#define B3WAT_10 0xA0000000 /* Bank 3 Write Access Time = 10 cycles */ +#define B3WAT_11 0xB0000000 /* Bank 3 Write Access Time = 11 cycles */ +#define B3WAT_12 0xC0000000 /* Bank 3 Write Access Time = 12 cycles */ +#define B3WAT_13 0xD0000000 /* Bank 3 Write Access Time = 13 cycles */ +#define B3WAT_14 0xE0000000 /* Bank 3 Write Access Time = 14 cycles */ +#define B3WAT_15 0xF0000000 /* Bank 3 Write Access Time = 15 cycles */ + +/* + * SDRAM CONTROLLER MASKS + */ + +/* EBIU_SDGCTL Masks */ +#define SCTLE 0x00000001 /* Enable SCLK[0], /SRAS, /SCAS, /SWE, SDQM[3:0] */ +#define CL_2 0x00000008 /* SDRAM CAS latency = 2 cycles */ +#define CL_3 0x0000000C /* SDRAM CAS latency = 3 cycles */ +#define PFE 0x00000010 /* Enable SDRAM prefetch */ +#define PFP 0x00000020 /* Prefetch has priority over AMC requests */ +#define TRAS_1 0x00000040 /* SDRAM tRAS = 1 cycle */ +#define TRAS_2 0x00000080 /* SDRAM tRAS = 2 cycles */ +#define TRAS_3 0x000000C0 /* SDRAM tRAS = 3 cycles */ +#define TRAS_4 0x00000100 /* SDRAM tRAS = 4 cycles */ +#define TRAS_5 0x00000140 /* SDRAM tRAS = 5 cycles */ +#define TRAS_6 0x00000180 /* SDRAM tRAS = 6 cycles */ +#define TRAS_7 0x000001C0 /* SDRAM tRAS = 7 cycles */ +#define TRAS_8 0x00000200 /* SDRAM tRAS = 8 cycles */ +#define TRAS_9 0x00000240 /* SDRAM tRAS = 9 cycles */ +#define TRAS_10 0x00000280 /* SDRAM tRAS = 10 cycles */ +#define TRAS_11 0x000002C0 /* SDRAM tRAS = 11 cycles */ +#define TRAS_12 0x00000300 /* SDRAM tRAS = 12 cycles */ +#define TRAS_13 0x00000340 /* SDRAM tRAS = 13 cycles */ +#define TRAS_14 0x00000380 /* SDRAM tRAS = 14 cycles */ +#define TRAS_15 0x000003C0 /* SDRAM tRAS = 15 cycles */ +#define TRP_1 0x00000800 /* SDRAM tRP = 1 cycle */ +#define TRP_2 0x00001000 /* SDRAM tRP = 2 cycles */ +#define TRP_3 0x00001800 /* SDRAM tRP = 3 cycles */ +#define TRP_4 0x00002000 /* SDRAM tRP = 4 cycles */ +#define TRP_5 0x00002800 /* SDRAM tRP = 5 cycles */ +#define TRP_6 0x00003000 /* SDRAM tRP = 6 cycles */ +#define TRP_7 0x00003800 /* SDRAM tRP = 7 cycles */ +#define TRCD_1 0x00008000 /* SDRAM tRCD = 1 cycle */ +#define TRCD_2 0x00010000 /* SDRAM tRCD = 2 cycles */ +#define TRCD_3 0x00018000 /* SDRAM tRCD = 3 cycles */ +#define TRCD_4 0x00020000 /* SDRAM tRCD = 4 cycles */ +#define TRCD_5 0x00028000 /* SDRAM tRCD = 5 cycles */ +#define TRCD_6 0x00030000 /* SDRAM tRCD = 6 cycles */ +#define TRCD_7 0x00038000 /* SDRAM tRCD = 7 cycles */ +#define TWR_1 0x00080000 /* SDRAM tWR = 1 cycle */ +#define TWR_2 0x00100000 /* SDRAM tWR = 2 cycles */ +#define TWR_3 0x00180000 /* SDRAM tWR = 3 cycles */ +#define PUPSD 0x00200000 /* Power-up start delay */ +#define PSM 0x00400000 /* SDRAM power-up sequence = Precharge, mode register set, 8 CBR refresh cycles */ +#define PSS 0x00800000 /* enable SDRAM power-up sequence on next SDRAM access */ +#define SRFS 0x01000000 /* Start SDRAM self-refresh mode */ +#define EBUFE 0x02000000 /* Enable external buffering timing */ +#define FBBRW 0x04000000 /* Fast back-to-back read write enable */ +#define EMREN 0x10000000 /* Extended mode register enable */ +#define TCSR 0x20000000 /* Temp compensated self refresh value 85 deg C */ +#define CDDBG 0x40000000 /* Tristate SDRAM controls during bus grant */ + +/* EBIU_SDBCTL Masks */ +#define EB0_E 0x00000001 /* Enable SDRAM external bank 0 */ +#define EB0_SZ_16 0x00000000 /* SDRAM external bank size = 16MB */ +#define EB0_SZ_32 0x00000002 /* SDRAM external bank size = 32MB */ +#define EB0_SZ_64 0x00000004 /* SDRAM external bank size = 64MB */ +#define EB0_SZ_128 0x00000006 /* SDRAM external bank size = 128MB */ +#define EB0_CAW_8 0x00000000 /* SDRAM external bank column address width = 8 bits */ +#define EB0_CAW_9 0x00000010 /* SDRAM external bank column address width = 9 bits */ +#define EB0_CAW_10 0x00000020 /* SDRAM external bank column address width = 9 bits */ +#define EB0_CAW_11 0x00000030 /* SDRAM external bank column address width = 9 bits */ + +#define EB1_E 0x00000100 /* Enable SDRAM external bank 1 */ +#define EB1__SZ_16 0x00000000 /* SDRAM external bank size = 16MB */ +#define EB1__SZ_32 0x00000200 /* SDRAM external bank size = 32MB */ +#define EB1__SZ_64 0x00000400 /* SDRAM external bank size = 64MB */ +#define EB1__SZ_128 0x00000600 /* SDRAM external bank size = 128MB */ +#define EB1__CAW_8 0x00000000 /* SDRAM external bank column address width = 8 bits */ +#define EB1__CAW_9 0x00001000 /* SDRAM external bank column address width = 9 bits */ +#define EB1__CAW_10 0x00002000 /* SDRAM external bank column address width = 9 bits */ +#define EB1__CAW_11 0x00003000 /* SDRAM external bank column address width = 9 bits */ + +#define EB2__E 0x00010000 /* Enable SDRAM external bank 2 */ +#define EB2__SZ_16 0x00000000 /* SDRAM external bank size = 16MB */ +#define EB2__SZ_32 0x00020000 /* SDRAM external bank size = 32MB */ +#define EB2__SZ_64 0x00040000 /* SDRAM external bank size = 64MB */ +#define EB2__SZ_128 0x00060000 /* SDRAM external bank size = 128MB */ +#define EB2__CAW_8 0x00000000 /* SDRAM external bank column address width = 8 bits */ +#define EB2__CAW_9 0x00100000 /* SDRAM external bank column address width = 9 bits */ +#define EB2__CAW_10 0x00200000 /* SDRAM external bank column address width = 9 bits */ +#define EB2__CAW_11 0x00300000 /* SDRAM external bank column address width = 9 bits */ + +#define EB3__E 0x01000000 /* Enable SDRAM external bank 3 */ +#define EB3__SZ_16 0x00000000 /* SDRAM external bank size = 16MB */ +#define EB3__SZ_32 0x02000000 /* SDRAM external bank size = 32MB */ +#define EB3__SZ_64 0x04000000 /* SDRAM external bank size = 64MB */ +#define EB3__SZ_128 0x06000000 /* SDRAM external bank size = 128MB */ +#define EB3__CAW_8 0x00000000 /* SDRAM external bank column address width = 8 bits */ +#define EB3__CAW_9 0x10000000 /* SDRAM external bank column address width = 9 bits */ +#define EB3__CAW_10 0x20000000 /* SDRAM external bank column address width = 9 bits */ +#define EB3__CAW_11 0x30000000 /* SDRAM external bank column address width = 9 bits */ + +/* EBIU_SDSTAT Masks */ +#define SDCI 0x00000001 /* SDRAM controller is idle */ +#define SDSRA 0x00000002 /* SDRAM SDRAM self refresh is active */ +#define SDPUA 0x00000004 /* SDRAM power up active */ +#define SDRS 0x00000008 /* SDRAM is in reset state */ +#define SDEASE 0x00000010 /* SDRAM EAB sticky error status - W1C */ +#define BGSTAT 0x00000020 /* Bus granted */ + +#define COREMMR_BASE 0xFFE00000 /* Core MMRs */ +#define SYSMMR_BASE 0xFFC00000 /* System MMRs */ + +/* Watchdog Timer registers for Core A (0xFFC0 0200-0xFFC0 02FF) */ +#define WDOG_CTL 0xFFC00200 /* Watchdog Control register */ +#define WDOG_CNT 0xFFC00204 /* Watchdog Count register */ +#define WDOG_STAT 0xFFC00208 /* Watchdog Status register */ + +/* Programmable Flag 0 registers (0xFFC0 0700-0xFFC0 07FF) */ +#define FIO_FLAG_D 0xFFC00700 /* Flag Data register */ +#define FIO_FLAG_C 0xFFC00704 /* Flag Clear register */ +#define FIO_FLAG_S 0xFFC00708 /* Flag Set register */ +#define FIO_FLAG_T 0xFFC0070C /* Flag Toggle register */ +#define FIO_MASKA_D 0xFFC00710 /* Flag Mask Interrupt A Data register */ +#define FIO_MASKA_C 0xFFC00714 /* Flag Mask Interrupt A Clear register */ +#define FIO_MASKA_S 0xFFC00718 /* Flag Mask Interrupt A Set register */ +#define FIO_MASKA_T 0xFFC0071C /* Flag Mask Interrupt A Toggle register */ +#define FIO_MASKB_D 0xFFC00720 /* Flag Mask Interrupt B Data register */ +#define FIO_MASKB_C 0xFFC00724 /* Flag Mask Interrupt B Clear register */ +#define FIO_MASKB_S 0xFFC00728 /* Flag Mask Interrupt B Set register */ +#define FIO_MASKB_T 0xFFC0072C /* Flag Mask Interrupt B Toggle register */ +#define FIO_DIR 0xFFC00730 /* Flag Direction register */ +#define FIO_POLAR 0xFFC00734 /* Flag Polarity register */ +#define FIO_EDGE 0xFFC00738 /* Flag Interrupt Sensitivity register */ +#define FIO_BOTH 0xFFC0073C /* Flag Set on Both Edges register */ +#define FIO_INEN 0xFFC00740 /* Flag Input Enable register */ + +/* Parallel Peripheral Interface (PPI) 0 registers (0xFFC0 1000-0xFFC0 10FF) */ +#define PPI_CONTROL 0xFFC01000 /* PPI0 Control register */ +#define PPI_STATUS 0xFFC01004 /* PPI0 Status register */ +#define PPI_COUNT 0xFFC01008 /* PPI0 Transfer Count register */ +#define PPI_DELAY 0xFFC0100C /* PPI0 Delay Count register */ +#define PPI_FRAME 0xFFC01010 /* PPI0 Frame Length register */ + +/* + * System Reset and Interrupt Controller registers for + * core A (0xFFC0 0100-0xFFC0 01FF) + */ +#define SWRST 0xFFC00100 /* Software Reset register */ +#define SYSCR 0xFFC00104 /* System Reset Configuration register */ +#define RVECT 0xFFC00108 /* SIC Reset Vector Address Register */ +#define SIC_SWRST 0xFFC00100 /* Software Reset register */ +#define SIC_SYSCR 0xFFC00104 /* System Reset Configuration register */ +#define SIC_RVECT 0xFFC00108 /* SIC Reset Vector Address Register */ +#define SIC_IMASK 0xFFC0010C /* SIC Interrupt Mask register 0 - hack to fix old tests */ +#define SIC_IAR 0xFFC00124 /* SIC Interrupt Assignment Register 0 */ +#define SIC_IAR1 0xFFC00128 /* SIC Interrupt Assignment Register 1 */ +#define SIC_IAR2 0xFFC0012C /* SIC Interrupt Assignment Register 2 */ +#define SIC_ISR 0xFFC00114 /* SIC Interrupt Status register 0 */ +#define SIC_IWR 0xFFC0011C /* SIC Interrupt Wakeup-Enable register 0 */ + +/* EBIU_SDBCTL Masks */ +#define EB_E 0x00000001 /* Enable SDRAM external bank 0 */ +#define EB_SZ_16 0x00000000 /* SDRAM external bank size = 16MB */ +#define EB_SZ_32 0x00000002 /* SDRAM external bank size = 32MB */ +#define EB_SZ_64 0x00000004 /* SDRAM external bank size = 64MB */ +#define EB_SZ_128 0x00000006 /* SDRAM external bank size = 128MB */ +#define EB_CAW_8 0x00000000 /* SDRAM external bank column address width = 8 bits */ +#define EB_CAW_9 0x00000010 /* SDRAM external bank column address width = 9 bits */ +#define EB_CAW_10 0x00000020 /* SDRAM external bank column address width = 9 bits */ +#define EB_CAW_11 0x00000030 /* SDRAM external bank column address width = 9 bits */ + +/* EBIU_SDBCTL Masks */ +#define EBE 0x00000001 /* Enable SDRAM external bank 0 */ +#define EBSZ_16 0x00000000 /* SDRAM external bank size = 16MB */ +#define EBSZ_32 0x00000002 /* SDRAM external bank size = 32MB */ +#define EBSZ_64 0x00000004 /* SDRAM external bank size = 64MB */ +#define EBSZ_128 0x00000006 /* SDRAM external bank size = 128MB */ +#define EBCAW_8 0x00000000 /* SDRAM external bank column address width = 8 bits */ +#define EBCAW_9 0x00000010 /* SDRAM external bank column address width = 9 bits */ +#define EBCAW_10 0x00000020 /* SDRAM external bank column address width = 9 bits */ +#define EBCAW_11 0x00000030 /* SDRAM external bank column address width = 9 bits */ + +/* Memory DMA1 Controller registers (0xFFC0 1E80-0xFFC0 1FFF) */ +#define MDMA_D0_CONFIG 0xFFC01F08 /* MemDMA1 Stream 0 Destination Configuration */ +#define MDMA_D0_NEXT_DESC_PTR 0xFFC01F00 /* MemDMA1 Stream 0 Destination Next Descriptor Ptr Reg */ +#define MDMA_D0_START_ADDR 0xFFC01F04 /* MemDMA1 Stream 0 Destination Start Address */ +#define MDMA_D0_X_COUNT 0xFFC01F10 /* MemDMA1 Stream 0 Destination Inner-Loop Count */ +#define MDMA_D0_Y_COUNT 0xFFC01F18 /* MemDMA1 Stream 0 Destination Outer-Loop Count */ +#define MDMA_D0_X_MODIFY 0xFFC01F14 /* MemDMA1 Stream 0 Dest Inner-Loop Address-Increment */ +#define MDMA_D0_Y_MODIFY 0xFFC01F1C /* MemDMA1 Stream 0 Dest Outer-Loop Address-Increment */ +#define MDMA_D0_CURR_DESC_PTR 0xFFC01F20 /* MemDMA1 Stream 0 Dest Current Descriptor Ptr reg */ +#define MDMA_D0_CURR_ADDR 0xFFC01F24 /* MemDMA1 Stream 0 Destination Current Address */ +#define MDMA_D0_CURR_X_COUNT 0xFFC01F30 /* MemDMA1 Stream 0 Dest Current Inner-Loop Count */ +#define MDMA_D0_CURR_Y_COUNT 0xFFC01F38 /* MemDMA1 Stream 0 Dest Current Outer-Loop Count */ +#define MDMA_D0_IRQ_STATUS 0xFFC01F28 /* MemDMA1 Stream 0 Destination Interrupt/Status */ +#define MDMA_D0_PERIPHERAL_MAP 0xFFC01F2C /* MemDMA1 Stream 0 Destination Peripheral Map */ + +#define MDMA_S0_CONFIG 0xFFC01F48 /* MemDMA1 Stream 0 Source Configuration */ +#define MDMA_S0_NEXT_DESC_PTR 0xFFC01F40 /* MemDMA1 Stream 0 Source Next Descriptor Ptr Reg */ +#define MDMA_S0_START_ADDR 0xFFC01F44 /* MemDMA1 Stream 0 Source Start Address */ +#define MDMA_S0_X_COUNT 0xFFC01F50 /* MemDMA1 Stream 0 Source Inner-Loop Count */ +#define MDMA_S0_Y_COUNT 0xFFC01F58 /* MemDMA1 Stream 0 Source Outer-Loop Count */ +#define MDMA_S0_X_MODIFY 0xFFC01F54 /* MemDMA1 Stream 0 Source Inner-Loop Address-Increment */ +#define MDMA_S0_Y_MODIFY 0xFFC01F5C /* MemDMA1 Stream 0 Source Outer-Loop Address-Increment */ +#define MDMA_S0_CURR_DESC_PTR 0xFFC01F60 /* MemDMA1 Stream 0 Source Current Descriptor Ptr reg */ +#define MDMA_S0_CURR_ADDR 0xFFC01F64 /* MemDMA1 Stream 0 Source Current Address */ +#define MDMA_S0_CURR_X_COUNT 0xFFC01F70 /* MemDMA1 Stream 0 Source Current Inner-Loop Count */ +#define MDMA_S0_CURR_Y_COUNT ` 0xFFC01F78 /* MemDMA1 Stream 0 Source Current Outer-Loop Count */ +#define MDMA_S0_IRQ_STATUS 0xFFC01F68 /* MemDMA1 Stream 0 Source Interrupt/Status */ +#define MDMA_S0_PERIPHERAL_MAP 0xFFC01F6C /* MemDMA1 Stream 0 Source Peripheral Map */ + +#define MDMA_D1_CONFIG 0xFFC01F88 /* MemDMA1 Stream 1 Destination Configuration */ +#define MDMA_D1_NEXT_DESC_PTR 0xFFC01F80 /* MemDMA1 Stream 1 Destination Next Descriptor Ptr Reg */ +#define MDMA_D1_START_ADDR 0xFFC01F84 /* MemDMA1 Stream 1 Destination Start Address */ +#define MDMA_D1_X_COUNT 0xFFC01F90 /* MemDMA1 Stream 1 Destination Inner-Loop Count */ +#define MDMA_D1_Y_COUNT 0xFFC01F98 /* MemDMA1 Stream 1 Destination Outer-Loop Count */ +#define MDMA_D1_X_MODIFY 0xFFC01F94 /* MemDMA1 Stream 1 Dest Inner-Loop Address-Increment */ +#define MDMA_D1_Y_MODIFY 0xFFC01F9C /* MemDMA1 Stream 1 Dest Outer-Loop Address-Increment */ +#define MDMA_D1_CURR_DESC_PTR 0xFFC01FA0 /* MemDMA1 Stream 1 Dest Current Descriptor Ptr reg */ +#define MDMA_D1_CURR_ADDR 0xFFC01FA4 /* MemDMA1 Stream 1 Dest Current Address */ +#define MDMA_D1_CURR_X_COUNT 0xFFC01FB0 /* MemDMA1 Stream 1 Dest Current Inner-Loop Count */ +#define MDMA_D1_CURR_Y_COUNT 0xFFC01FB8 /* MemDMA1 Stream 1 Dest Current Outer-Loop Count */ +#define MDMA_D1_IRQ_STATUS 0xFFC01FA8 /* MemDMA1 Stream 1 Dest Interrupt/Status */ +#define MDMA_D1_PERIPHERAL_MAP 0xFFC01FAC /* MemDMA1 Stream 1 Dest Peripheral Map */ + +#define MDMA_S1_CONFIG 0xFFC01FC8 /* MemDMA1 Stream 1 Source Configuration */ +#define MDMA_S1_NEXT_DESC_PTR 0xFFC01FC0 /* MemDMA1 Stream 1 Source Next Descriptor Ptr Reg */ +#define MDMA_S1_START_ADDR 0xFFC01FC4 /* MemDMA1 Stream 1 Source Start Address */ +#define MDMA_S1_X_COUNT 0xFFC01FD0 /* MemDMA1 Stream 1 Source Inner-Loop Count */ +#define MDMA_S1_Y_COUNT 0xFFC01FD8 /* MemDMA1 Stream 1 Source Outer-Loop Count */ +#define MDMA_S1_X_MODIFY 0xFFC01FD4 /* MemDMA1 Stream 1 Source Inner-Loop Address-Increment */ +#define MDMA_S1_Y_MODIFY 0xFFC01FDC /* MemDMA1 Stream 1 Source Outer-Loop Address-Increment */ +#define MDMA_S1_CURR_DESC_PTR 0xFFC01FE0 /* MemDMA1 Stream 1 Source Current Descriptor Ptr reg */ +#define MDMA_S1_CURR_ADDR 0xFFC01FE4 /* MemDMA1 Stream 1 Source Current Address */ +#define MDMA_S1_CURR_X_COUNT 0xFFC01FF0 /* MemDMA1 Stream 1 Source Current Inner-Loop Count */ +#define MDMA_S1_CURR_Y_COUNT 0xFFC01FF8 /* MemDMA1 Stream 1 Source Current Outer-Loop Count */ +#define MDMA_S1_IRQ_STATUS 0xFFC01FE8 /* MemDMA1 Stream 1 Source Interrupt/Status */ +#define MDMA_S1_PERIPHERAL_MAP 0xFFC01FEC /* MemDMA1 Stream 1 Source Peripheral Map */ + +#define DMA0_CONFIG 0xFFC01C08 /* DMA1 Channel 0 Configuration register */ +#define DMA0_NEXT_DESC_PTR 0xFFC01C00 /* DMA1 Channel 0 Next Descripter Ptr Reg */ +#define DMA0_START_ADDR 0xFFC01C04 /* DMA1 Channel 0 Start Address */ +#define DMA0_X_COUNT 0xFFC01C10 /* DMA1 Channel 0 Inner Loop Count */ +#define DMA0_Y_COUNT 0xFFC01C18 /* DMA1 Channel 0 Outer Loop Count */ +#define DMA0_X_MODIFY 0xFFC01C14 /* DMA1 Channel 0 Inner Loop Addr Increment */ +#define DMA0_Y_MODIFY 0xFFC01C1C /* DMA1 Channel 0 Outer Loop Addr Increment */ +#define DMA0_CURR_DESC_PTR 0xFFC01C20 /* DMA1 Channel 0 Current Descriptor Pointer */ +#define DMA0_CURR_ADDR 0xFFC01C24 /* DMA1 Channel 0 Current Address Pointer */ +#define DMA0_CURR_X_COUNT 0xFFC01C30 /* DMA1 Channel 0 Current Inner Loop Count */ +#define DMA0_CURR_Y_COUNT 0xFFC01C38 /* DMA1 Channel 0 Current Outer Loop Count */ +#define DMA0_IRQ_STATUS 0xFFC01C28 /* DMA1 Channel 0 Interrupt Status Register */ +#define DMA0_PERIPHERAL_MAP 0xFFC01C2C /* DMA1 Channel 0 Peripheral Map Register */ + +#define DMA1_CONFIG 0xFFC00C08 /* DMA2 Channel 0 Configuration register */ +#define DMA1_NEXT_DESC_PTR 0xFFC00C00 /* DMA2 Channel 0 Next Descripter Ptr Reg */ +#define DMA1_START_ADDR 0xFFC00C04 /* DMA2 Channel 0 Start Address */ +#define DMA1_X_COUNT 0xFFC00C10 /* DMA2 Channel 0 Inner Loop Count */ +#define DMA1_Y_COUNT 0xFFC00C18 /* DMA2 Channel 0 Outer Loop Count */ +#define DMA1_X_MODIFY 0xFFC00C14 /* DMA2 Channel 0 Inner Loop Addr Increment */ +#define DMA1_Y_MODIFY 0xFFC00C1C /* DMA2 Channel 0 Outer Loop Addr Increment */ +#define DMA1_CURR_DESC_PTR 0xFFC00C20 /* DMA2 Channel 0 Current Descriptor Pointer */ +#define DMA1_CURR_ADDR 0xFFC00C24 /* DMA2 Channel 0 Current Address Pointer */ +#define DMA1_CURR_X_COUNT 0xFFC00C30 /* DMA2 Channel 0 Current Inner Loop Count */ +#define DMA1_CURR_Y_COUNT 0xFFC00C38 /* DMA2 Channel 0 Current Outer Loop Count */ +#define DMA1_IRQ_STATUS 0xFFC00C28 /* DMA2 Channel 0 Interrupt /Status Register */ +#define DMA1_PERIPHERAL_MAP 0xFFC00C2C /* DMA2 Channel 0 Peripheral Map Register */ + +#define DMA2_CONFIG 0xFFC00C48 /* DMA2 Channel 1 Configuration register */ +#define DMA2_NEXT_DESC_PTR 0xFFC00C40 /* DMA2 Channel 1 Next Descripter Ptr Reg */ +#define DMA2_START_ADDR 0xFFC00C44 /* DMA2 Channel 1 Start Address */ +#define DMA2_X_COUNT 0xFFC00C50 /* DMA2 Channel 1 Inner Loop Count */ +#define DMA2_Y_COUNT 0xFFC00C58 /* DMA2 Channel 1 Outer Loop Count */ +#define DMA2_X_MODIFY 0xFFC00C54 /* DMA2 Channel 1 Inner Loop Addr Increment */ +#define DMA2_Y_MODIFY 0xFFC00C5C /* DMA2 Channel 1 Outer Loop Addr Increment */ +#define DMA2_CURR_DESC_PTR 0xFFC00C60 /* DMA2 Channel 1 Current Descriptor Pointer */ +#define DMA2_CURR_ADDR 0xFFC00C64 /* DMA2 Channel 1 Current Address Pointer */ +#define DMA2_CURR_X_COUNT 0xFFC00C70 /* DMA2 Channel 1 Current Inner Loop Count */ +#define DMA2_CURR_Y_COUNT 0xFFC00C78 /* DMA2 Channel 1 Current Outer Loop Count */ +#define DMA2_IRQ_STATUS 0xFFC00C68 /* DMA2 Channel 1 Interrupt /Status Register */ +#define DMA2_PERIPHERAL_MAP 0xFFC00C6C /* DMA2 Channel 1 Peripheral Map Register */ + +#define DMA3_CONFIG 0xFFC00C88 /* DMA2 Channel 2 Configuration register */ +#define DMA3_NEXT_DESC_PTR 0xFFC00C80 /* DMA2 Channel 2 Next Descripter Ptr Reg */ +#define DMA3_START_ADDR 0xFFC00C84 /* DMA2 Channel 2 Start Address */ +#define DMA3_X_COUNT 0xFFC00C90 /* DMA2 Channel 2 Inner Loop Count */ +#define DMA3_Y_COUNT 0xFFC00C98 /* DMA2 Channel 2 Outer Loop Count */ +#define DMA3_X_MODIFY 0xFFC00C94 /* DMA2 Channel 2 Inner Loop Addr Increment */ +#define DMA3_Y_MODIFY 0xFFC00C9C /* DMA2 Channel 2 Outer Loop Addr Increment */ +#define DMA3_CURR_DESC_PTR 0xFFC00CA0 /* DMA2 Channel 2 Current Descriptor Pointer */ +#define DMA3_CURR_ADDR 0xFFC00CA4 /* DMA2 Channel 2 Current Address Pointer */ +#define DMA3_CURR_X_COUNT 0xFFC00CB0 /* DMA2 Channel 2 Current Inner Loop Count */ +#define DMA3_CURR_Y_COUNT 0xFFC00CB8 /* DMA2 Channel 2 Current Outer Loop Count */ +#define DMA3_IRQ_STATUS 0xFFC00CA8 /* DMA2 Channel 2 Interrupt /Status Register */ +#define DMA3_PERIPHERAL_MAP 0xFFC00CAC /* DMA2 Channel 2 Peripheral Map Register */ + +#define DMA4_CONFIG 0xFFC00CC8 /* DMA2 Channel 3 Configuration register */ +#define DMA4_NEXT_DESC_PTR 0xFFC00CC0 /* DMA2 Channel 3 Next Descripter Ptr Reg */ +#define DMA4_START_ADDR 0xFFC00CC4 /* DMA2 Channel 3 Start Address */ +#define DMA4_X_COUNT 0xFFC00CD0 /* DMA2 Channel 3 Inner Loop Count */ +#define DMA4_Y_COUNT 0xFFC00CD8 /* DMA2 Channel 3 Outer Loop Count */ +#define DMA4_X_MODIFY 0xFFC00CD4 /* DMA2 Channel 3 Inner Loop Addr Increment */ +#define DMA4_Y_MODIFY 0xFFC00CDC /* DMA2 Channel 3 Outer Loop Addr Increment */ +#define DMA4_CURR_DESC_PTR 0xFFC00CE0 /* DMA2 Channel 3 Current Descriptor Pointer */ +#define DMA4_CURR_ADDR 0xFFC00CE4 /* DMA2 Channel 3 Current Address Pointer */ +#define DMA4_CURR_X_COUNT 0xFFC00CF0 /* DMA2 Channel 3 Current Inner Loop Count */ +#define DMA4_CURR_Y_COUNT 0xFFC00CF8 /* DMA2 Channel 3 Current Outer Loop Count */ +#define DMA4_IRQ_STATUS 0xFFC00CE8 /* DMA2 Channel 3 Interrupt /Status Register */ +#define DMA4_PERIPHERAL_MAP 0xFFC00CEC /* DMA2 Channel 3 Peripheral Map Register */ + +#define DMA5_CONFIG 0xFFC00D08 /* DMA2 Channel 4 Configuration register */ +#define DMA5_NEXT_DESC_PTR 0xFFC00D00 /* DMA2 Channel 4 Next Descripter Ptr Reg */ +#define DMA5_START_ADDR 0xFFC00D04 /* DMA2 Channel 4 Start Address */ +#define DMA5_X_COUNT 0xFFC00D10 /* DMA2 Channel 4 Inner Loop Count */ +#define DMA5_Y_COUNT 0xFFC00D18 /* DMA2 Channel 4 Outer Loop Count */ +#define DMA5_X_MODIFY 0xFFC00D14 /* DMA2 Channel 4 Inner Loop Addr Increment */ +#define DMA5_Y_MODIFY 0xFFC00D1C /* DMA2 Channel 4 Outer Loop Addr Increment */ +#define DMA5_CURR_DESC_PTR 0xFFC00D20 /* DMA2 Channel 4 Current Descriptor Pointer */ +#define DMA5_CURR_ADDR 0xFFC00D24 /* DMA2 Channel 4 Current Address Pointer */ +#define DMA5_CURR_X_COUNT 0xFFC00D30 /* DMA2 Channel 4 Current Inner Loop Count */ +#define DMA5_CURR_Y_COUNT 0xFFC00D38 /* DMA2 Channel 4 Current Outer Loop Count */ +#define DMA5_IRQ_STATUS 0xFFC00D28 /* DMA2 Channel 4 Interrupt /Status Register */ +#define DMA5_PERIPHERAL_MAP 0xFFC00D2C /* DMA2 Channel 4 Peripheral Map Register */ + +#define DMA6_CONFIG 0xFFC00D48 /* DMA2 Channel 5 Configuration register */ +#define DMA6_NEXT_DESC_PTR 0xFFC00D40 /* DMA2 Channel 5 Next Descripter Ptr Reg */ +#define DMA6_START_ADDR 0xFFC00D44 /* DMA2 Channel 5 Start Address */ +#define DMA6_X_COUNT 0xFFC00D50 /* DMA2 Channel 5 Inner Loop Count */ +#define DMA6_Y_COUNT 0xFFC00D58 /* DMA2 Channel 5 Outer Loop Count */ +#define DMA6_X_MODIFY 0xFFC00D54 /* DMA2 Channel 5 Inner Loop Addr Increment */ +#define DMA6_Y_MODIFY 0xFFC00D5C /* DMA2 Channel 5 Outer Loop Addr Increment */ +#define DMA6_CURR_DESC_PTR 0xFFC00D60 /* DMA2 Channel 5 Current Descriptor Pointer */ +#define DMA6_CURR_ADDR 0xFFC00D64 /* DMA2 Channel 5 Current Address Pointer */ +#define DMA6_CURR_X_COUNT 0xFFC00D70 /* DMA2 Channel 5 Current Inner Loop Count */ +#define DMA6_CURR_Y_COUNT 0xFFC00D78 /* DMA2 Channel 5 Current Outer Loop Count */ +#define DMA6_IRQ_STATUS 0xFFC00D68 /* DMA2 Channel 5 Interrupt /Status Register */ +#define DMA6_PERIPHERAL_MAP 0xFFC00D6C /* DMA2 Channel 5 Peripheral Map Register */ + +#define DMA7_CONFIG 0xFFC00D88 /* DMA2 Channel 6 Configuration register */ +#define DMA7_NEXT_DESC_PTR 0xFFC00D80 /* DMA2 Channel 6 Next Descripter Ptr Reg */ +#define DMA7_START_ADDR 0xFFC00D84 /* DMA2 Channel 6 Start Address */ +#define DMA7_X_COUNT 0xFFC00D90 /* DMA2 Channel 6 Inner Loop Count */ +#define DMA7_Y_COUNT 0xFFC00D98 /* DMA2 Channel 6 Outer Loop Count */ +#define DMA7_X_MODIFY 0xFFC00D94 /* DMA2 Channel 6 Inner Loop Addr Increment */ +#define DMA7_Y_MODIFY 0xFFC00D9C /* DMA2 Channel 6 Outer Loop Addr Increment */ +#define DMA7_CURR_DESC_PTR 0xFFC00DA0 /* DMA2 Channel 6 Current Descriptor Pointer */ +#define DMA7_CURR_ADDR 0xFFC00DA4 /* DMA2 Channel 6 Current Address Pointer */ +#define DMA7_CURR_X_COUNT 0xFFC00DB0 /* DMA2 Channel 6 Current Inner Loop Count */ +#define DMA7_CURR_Y_COUNT 0xFFC00DB8 /* DMA2 Channel 6 Current Outer Loop Count */ +#define DMA7_IRQ_STATUS 0xFFC00DA8 /* DMA2 Channel 6 Interrupt /Status Register */ +#define DMA7_PERIPHERAL_MAP 0xFFC00DAC /* DMA2 Channel 6 Peripheral Map Register */ + +#define TIMER_ENABLE 0xFFC00680 /* Timer Enable Register */ +#define TIMER_DISABLE 0xFFC00684 /* Timer Disable register */ +#define TIMER_STATUS 0xFFC00688 /* Timer Status register */ + +/* DMAx_CONFIG, MDMA_yy_CONFIG, IMDMA_yy_CONFIG Masks */ +#define WDSIZE8 0x00000000 /* Word Size 8 bits */ +#define WDSIZE16 0x00000004 /* Word Size 16 bits */ +#define WDSIZE32 0x00000008 /* Word Size 32 bits */ + +#endif /* _DEF_BF561_H */ diff --git a/include/asm-blackfin/arch-bf561/defBF561_extn.h b/include/asm-blackfin/arch-bf561/defBF561_extn.h new file mode 100644 index 0000000..b309b74 --- /dev/null +++ b/include/asm-blackfin/arch-bf561/defBF561_extn.h @@ -0,0 +1,76 @@ +/* + * defBF561_extn.h + * + * This file is subject to the terms and conditions of the GNU Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Non-GPL License also available as part of VisualDSP++ + * + * http://www.analog.com/processors/resources/crosscore/visualDspDevSoftware.html + * + * (c) Copyright 2001-2005 Analog Devices, Inc. All rights reserved + * + * This file under source code control, please send bugs or changes to: + * dsptools.support@analog.com + * + */ + +#ifndef _DEF_BF561_EXTN_H +#define _DEF_BF561_EXTN_H + +#define OFFSET_( x ) ((x) & 0x0000FFFF) /* define macro for offset */ +/* Delay inserted for PLL transition */ +#define PLL_DELAY 0x1000 + +#define L1_ISRAM 0xFFA00000 +#define L1_ISRAM_END 0xFFA10000 +#define DATA_BANKA_SRAM 0xFF800000 +#define DATA_BANKA_SRAM_END 0xFF808000 +#define DATA_BANKB_SRAM 0xFF900000 +#define DATA_BANKB_SRAM_END 0xFF908000 +#define SYSMMR_BASE 0xFFC00000 +#define WDSIZE16 0x00000004 + +/* Event Vector Table Address */ +#define EVT_EMULATION_ADDR 0xffe02000 +#define EVT_RESET_ADDR 0xffe02004 +#define EVT_NMI_ADDR 0xffe02008 +#define EVT_EXCEPTION_ADDR 0xffe0200c +#define EVT_GLOBAL_INT_ENB_ADDR 0xffe02010 +#define EVT_HARDWARE_ERROR_ADDR 0xffe02014 +#define EVT_TIMER_ADDR 0xffe02018 +#define EVT_IVG7_ADDR 0xffe0201c +#define EVT_IVG8_ADDR 0xffe02020 +#define EVT_IVG9_ADDR 0xffe02024 +#define EVT_IVG10_ADDR 0xffe02028 +#define EVT_IVG11_ADDR 0xffe0202c +#define EVT_IVG12_ADDR 0xffe02030 +#define EVT_IVG13_ADDR 0xffe02034 +#define EVT_IVG14_ADDR 0xffe02038 +#define EVT_IVG15_ADDR 0xffe0203c +#define EVT_OVERRIDE_ADDR 0xffe02100 + +/* IMASK Bit values */ +#define IVG15_POS 0x00008000 +#define IVG14_POS 0x00004000 +#define IVG13_POS 0x00002000 +#define IVG12_POS 0x00001000 +#define IVG11_POS 0x00000800 +#define IVG10_POS 0x00000400 +#define IVG9_POS 0x00000200 +#define IVG8_POS 0x00000100 +#define IVG7_POS 0x00000080 +#define IVGTMR_POS 0x00000040 +#define IVGHW_POS 0x00000020 + +#define WDOG_TMR_DISABLE (0xAD << 4) +#define ICTL_RST 0x00000000 +#define ICTL_NMI 0x00000002 +#define ICTL_GP 0x00000004 +#define ICTL_DISABLE 0x00000003 + +/* Watch Dog timer values setup */ +#define WATCHDOG_DISABLE WDOG_TMR_DISABLE | ICTL_DISABLE + +#endif /* _DEF_BF561_EXTN_H */ diff --git a/include/asm-blackfin/arch-bf561/irq.h b/include/asm-blackfin/arch-bf561/irq.h new file mode 100644 index 0000000..2f7dd99 --- /dev/null +++ b/include/asm-blackfin/arch-bf561/irq.h @@ -0,0 +1,137 @@ +/* + * linux/arch/$(ARCH)/platform/$(PLATFORM)/irq.c + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + * + * Changed by HuTao Apr18, 2003 + * + * Copyright was missing when I got the code so took from MIPS arch ...MaTed--- + * Copyright (C) 1994 by Waldorf GMBH, written by Ralf Baechle + * Copyright (C) 1995, 96, 97, 98, 99, 2000, 2001 by Ralf Baechle + * + * Adapted for BlackFin (ADI) by Ted Ma <mated@sympatico.ca> + * Copyright (c) 2002 Arcturus Networks Inc. (www.arcturusnetworks.com) + * Copyright (c) 2002 Lineo, Inc. <mattw@lineo.com> + * + * Adapted for BlackFin BF533 by Bas Vermeulen <bas@buyways.nl> + * Copyright (c) 2003 BuyWays B.V. (www.buyways.nl) + * Copyright (c) 2004 LG Soft India. + * Copyright (c) 2004 HHTech. + * + * Adapted for BlackFin BF561 by Bas Vermeulen <bas@buyways.nl> + * Copyright (c) 2005 BuyWays B.V. (www.buyways.nl) + */ + +#ifndef _BF561_IRQ_H_ +#define _BF561_IRQ_H_ + +/* + * Interrupt source definitions: + * Event Source Core Event Name IRQ No + * Emulation Events EMU 0 + * Reset RST 1 + * NMI NMI 2 + * Exception EVX 3 + * Reserved -- 4 + * Hardware Error IVHW 5 + * Core Timer IVTMR 6 + * + * PLL Wakeup Interrupt IVG7 7 + * DMA1 Error (generic) IVG7 8 + * DMA2 Error (generic) IVG7 9 + * IMDMA Error (generic) IVG7 10 + * PPI1 Error Interrupt IVG7 11 + * PPI2 Error Interrupt IVG7 12 + * SPORT0 Error Interrupt IVG7 13 + * SPORT1 Error Interrupt IVG7 14 + * SPI Error Interrupt IVG7 15 + * UART Error Interrupt IVG7 16 + * Reserved Interrupt IVG7 17 + * + * DMA1 0 Interrupt(PPI1) IVG8 18 + * DMA1 1 Interrupt(PPI2) IVG8 19 + * DMA1 2 Interrupt IVG8 20 + * DMA1 3 Interrupt IVG8 21 + * DMA1 4 Interrupt IVG8 22 + * DMA1 5 Interrupt IVG8 23 + * DMA1 6 Interrupt IVG8 24 + * DMA1 7 Interrupt IVG8 25 + * DMA1 8 Interrupt IVG8 26 + * DMA1 9 Interrupt IVG8 27 + * DMA1 10 Interrupt IVG8 28 + * DMA1 11 Interrupt IVG8 29 + * + * DMA2 0 (SPORT0 RX) IVG9 30 + * DMA2 1 (SPORT0 TX) IVG9 31 + * DMA2 2 (SPORT1 RX) IVG9 32 + * DMA2 3 (SPORT2 TX) IVG9 33 + * DMA2 4 (SPI) IVG9 34 + * DMA2 5 (UART RX) IVG9 35 + * DMA2 6 (UART TX) IVG9 36 + * DMA2 7 Interrupt IVG9 37 + * DMA2 8 Interrupt IVG9 38 + * DMA2 9 Interrupt IVG9 39 + * DMA2 10 Interrupt IVG9 40 + * DMA2 11 Interrupt IVG9 41 + * + * TIMER 0 Interrupt IVG10 42 + * TIMER 1 Interrupt IVG10 43 + * TIMER 2 Interrupt IVG10 44 + * TIMER 3 Interrupt IVG10 45 + * TIMER 4 Interrupt IVG10 46 + * TIMER 5 Interrupt IVG10 47 + * TIMER 6 Interrupt IVG10 48 + * TIMER 7 Interrupt IVG10 49 + * TIMER 8 Interrupt IVG10 50 + * TIMER 9 Interrupt IVG10 51 + * TIMER 10 Interrupt IVG10 52 + * TIMER 11 Interrupt IVG10 53 + * + * Programmable Flags0 A (8) IVG11 54 + * Programmable Flags0 B (8) IVG11 55 + * Programmable Flags1 A (8) IVG11 56 + * Programmable Flags1 B (8) IVG11 57 + * Programmable Flags2 A (8) IVG11 58 + * Programmable Flags2 B (8) IVG11 59 + * + * MDMA1 0 write/read INT IVG8 60 + * MDMA1 1 write/read INT IVG8 61 + * + * MDMA2 0 write/read INT IVG9 62 + * MDMA2 1 write/read INT IVG9 63 + * + * IMDMA 0 write/read INT IVG12 64 + * IMDMA 1 write/read INT IVG12 65 + * + * Watch Dog Timer IVG13 66 + * + * Reserved interrupt IVG7 67 + * Reserved interrupt IVG7 68 + * Supplemental interrupt 0 IVG7 69 + * supplemental interrupt 1 IVG7 70 + * + * Software Interrupt 1 IVG14 71 + * Software Interrupt 2 IVG15 72 + */ + +/* + * The ABSTRACT IRQ definitions + * the first seven of the following are fixed, + * the rest you change if you need to. + */ +/* IVG 0-6 */ +#define IRQ_EMU 0 /* Emulation */ +#define IRQ_RST 1 /* Reset */ +#define IRQ_NMI 2 /* Non Maskable Interrupt */ +#define IRQ_EVX 3 /* Exception */ +#define IRQ_UNUSED 4 /* Reserved interrupt */ +#define IRQ_HWERR 5 /* Hardware Error */ +#define IRQ_CORETMR 6 /* Core timer */ + +#define IRQ_UART_RX_BIT 0x10000000 +#define IRQ_UART_TX_BIT 0x20000000 +#define IRQ_UART_ERROR_BIT 0x200 + +#endif /* _BF561_IRQ_H_ */ diff --git a/include/asm-blackfin/arch-common/bf53x_rtc.h b/include/asm-blackfin/arch-common/bf53x_rtc.h new file mode 100644 index 0000000..bc09922 --- /dev/null +++ b/include/asm-blackfin/arch-common/bf53x_rtc.h @@ -0,0 +1,46 @@ +/* + * U-boot - bf533_rtc.h + * + * Copyright (c) 2005 blackfin.uclinux.org + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _BF533_RTC_H_ +#define _BF533_RTC_H_ + +void rtc_init(void); +void wait_for_complete(void); +void rtc_reset(void); + +#define MIN_TO_SECS(_x_) (60 * _x_) +#define HRS_TO_SECS(_x_) (60 * 60 * _x_) +#define DAYS_TO_SECS(_x_) (24 * 60 * 60 * _x_) + +#define NUM_SECS_IN_DAY (24 * 3600) +#define NUM_SECS_IN_HOUR (3600) +#define NUM_SECS_IN_MIN (60) + +/* Shift values for RTC_STAT register */ +#define DAY_BITS_OFF 17 +#define HOUR_BITS_OFF 12 +#define MIN_BITS_OFF 6 +#define SEC_BITS_OFF 0 + +#endif diff --git a/include/asm-blackfin/arch-common/cdefBF5xx.h b/include/asm-blackfin/arch-common/cdefBF5xx.h new file mode 100644 index 0000000..aec70ce --- /dev/null +++ b/include/asm-blackfin/arch-common/cdefBF5xx.h @@ -0,0 +1,40 @@ +/************************************************************************ + * + * cdefBF53x.h + * + * (c) Copyright 2002-2003 Analog Devices, Inc. All rights reserved. + * + ************************************************************************/ + +#ifndef _CDEFBF53x_H +#define _CDEFBF53x_H + +#if defined(__ADSPBF531__) + #include <asm/arch-bf533/cdefBF531.h> +#elif defined(__ADSPBF532__) + #include <asm/arch-bf533/cdefBF532.h> +#elif defined(__ADSPBF533__) + #include <asm/arch-bf533/cdefBF533.h> + #include <asm/arch-bf533/defBF533_extn.h> + #include <asm/arch-bf533/bf533_serial.h> +#elif defined(__ADSPBF537__) + #include <asm/arch-bf537/cdefBF537.h> + #include <asm/arch-bf537/defBF537_extn.h> + #include <asm/arch-bf537/bf537_serial.h> +#elif defined(__ADSPBF561__) + #include <asm/arch-bf561/cdefBF561.h> + #include <asm/arch-bf561/defBF561_extn.h> + #include <asm/arch-bf561/bf561_serial.h> +#elif defined(__ADSPBF535__) + #include <asm/cpu/cdefBF5d35.h> +#elif defined(__AD6532__) + #include <asm/cpu/cdefAD6532.h> +#else + #if defined(__ADSPLPBLACKFIN__) + #include <asm/arch-bf533/cdefBF532.h> + #else + #include <asm/arch-bf533/cdefBF535.h> + #endif +#endif + +#endif /* _CDEFBF53x_H */ diff --git a/include/asm-blackfin/cpu/cdef_LPBlackfin.h b/include/asm-blackfin/arch-common/cdef_LPBlackfin.h index e6471cb..90b21e5 100644 --- a/include/asm-blackfin/cpu/cdef_LPBlackfin.h +++ b/include/asm-blackfin/arch-common/cdef_LPBlackfin.h @@ -1,38 +1,24 @@ -/* - * cdef_LPBlackfin.h - * - * This file is subject to the terms and conditions of the GNU Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Non-GPL License also available as part of VisualDSP++ +/************************************************************************ * - * http://www.analog.com/processors/resources/crosscore/visualDspDevSoftware.html - * - * (c) Copyright 2001-2005 Analog Devices, Inc. All rights reserved + * cdef_LPBlackfin.h * - * This file under source code control, please send bugs or changes to: - * dsptools.support@analog.com + * (c) Copyright 2002-2003 Analog Devices, Inc. All rights reserved. * - */ + ************************************************************************/ #ifndef _CDEF_LPBLACKFIN_H #define _CDEF_LPBLACKFIN_H -/* - * #if !defined(__ADSPLPBLACKFIN__) - * #warning cdef_LPBlackfin.h should only be included for 532 compatible chips. - * #endif - */ -#include <asm/cpu/def_LPBlackfin.h> +#if !defined(__ADSPLPBLACKFIN__) +#warning cdef_LPBlackfin.h should only be included for 532 compatible chips. +#endif +#include <asm/arch-common/def_LPBlackfin.h> -/* Cache & SRAM Memory */ +/* Cache & SRAM Memory */ #define pSRAM_BASE_ADDRESS ((volatile void **)SRAM_BASE_ADDRESS) #define pDMEM_CONTROL ((volatile unsigned long *)DMEM_CONTROL) #define pDCPLB_STATUS ((volatile unsigned long *)DCPLB_STATUS) #define pDCPLB_FAULT_ADDR ((volatile void **)DCPLB_FAULT_ADDR) - -/* #define MMR_TIMEOUT 0xFFE00010 */ /* Memory-Mapped Register Timeout Register */ #define pDCPLB_ADDR0 ((volatile void **)DCPLB_ADDR0) #define pDCPLB_ADDR1 ((volatile void **)DCPLB_ADDR1) #define pDCPLB_ADDR2 ((volatile void **)DCPLB_ADDR2) @@ -66,15 +52,8 @@ #define pDCPLB_DATA14 ((volatile unsigned long *)DCPLB_DATA14) #define pDCPLB_DATA15 ((volatile unsigned long *)DCPLB_DATA15) #define pDTEST_COMMAND ((volatile unsigned long *)DTEST_COMMAND) - -/* #define DTEST_INDEX 0xFFE00304 */ /* Data Test Index Register */ #define pDTEST_DATA0 ((volatile unsigned long *)DTEST_DATA0) #define pDTEST_DATA1 ((volatile unsigned long *)DTEST_DATA1) - -/* - * # define DTEST_DATA2 0xFFE00408 Data Test Data Register - * #define DTEST_DATA3 0xFFE0040C Data Test Data Register - */ #define pIMEM_CONTROL ((volatile unsigned long *)IMEM_CONTROL) #define pICPLB_STATUS ((volatile unsigned long *)ICPLB_STATUS) #define pICPLB_FAULT_ADDR ((volatile void **)ICPLB_FAULT_ADDR) @@ -111,8 +90,6 @@ #define pICPLB_DATA14 ((volatile unsigned long *)ICPLB_DATA14) #define pICPLB_DATA15 ((volatile unsigned long *)ICPLB_DATA15) #define pITEST_COMMAND ((volatile unsigned long *)ITEST_COMMAND) - -/* #define ITEST_INDEX 0xFFE01304 */ /* Instruction Test Index Register */ #define pITEST_DATA0 ((volatile unsigned long *)ITEST_DATA0) #define pITEST_DATA1 ((volatile unsigned long *)ITEST_DATA1) @@ -180,6 +157,4 @@ #define pPFCNTR0 ((volatile unsigned long *)PFCNTR0) #define pPFCNTR1 ((volatile unsigned long *)PFCNTR1) -/* #define IPRIO 0xFFE02110 */ /* Core Interrupt Priority Register */ - -#endif /* _CDEF_LPBLACKFIN_H */ +#endif /* _CDEF_LPBLACKFIN_H */ diff --git a/include/asm-blackfin/cpu/def_LPBlackfin.h b/include/asm-blackfin/arch-common/def_LPBlackfin.h index 9ac78c8..ebeeea0 100644 --- a/include/asm-blackfin/cpu/def_LPBlackfin.h +++ b/include/asm-blackfin/arch-common/def_LPBlackfin.h @@ -92,13 +92,13 @@ /* ** Masks */ /* Exception cause */ -#define SEQSTAT_EXCAUSE MK_BMSK_(SEQSTAT_EXCAUSE0_P ) | \ +#define SEQSTAT_EXCAUSE ( MK_BMSK_(SEQSTAT_EXCAUSE0_P ) | \ MK_BMSK_(SEQSTAT_EXCAUSE1_P ) | \ MK_BMSK_(SEQSTAT_EXCAUSE2_P ) | \ MK_BMSK_(SEQSTAT_EXCAUSE3_P ) | \ MK_BMSK_(SEQSTAT_EXCAUSE4_P ) | \ MK_BMSK_(SEQSTAT_EXCAUSE5_P ) | \ - 0 + 0 ) /* Indicates whether the last reset was a software reset (=1) */ #define SEQSTAT_SFTRESET MK_BMSK_(SEQSTAT_SFTRESET_P ) diff --git a/include/asm-blackfin/bitops.h b/include/asm-blackfin/bitops.h index 65d2c25..7766c4a 100644 --- a/include/asm-blackfin/bitops.h +++ b/include/asm-blackfin/bitops.h @@ -59,7 +59,7 @@ static __inline__ unsigned long ffz(unsigned long word) static __inline__ void set_bit(int nr, volatile void *addr) { - int *a = (int *) addr; + int *a = (int *)addr; int mask; unsigned long flags; @@ -72,7 +72,7 @@ static __inline__ void set_bit(int nr, volatile void *addr) static __inline__ void __set_bit(int nr, volatile void *addr) { - int *a = (int *) addr; + int *a = (int *)addr; int mask; a += nr >> 5; @@ -88,7 +88,7 @@ static __inline__ void __set_bit(int nr, volatile void *addr) static __inline__ void clear_bit(int nr, volatile void *addr) { - int *a = (int *) addr; + int *a = (int *)addr; int mask; unsigned long flags; @@ -102,7 +102,7 @@ static __inline__ void clear_bit(int nr, volatile void *addr) static __inline__ void change_bit(int nr, volatile void *addr) { int mask, flags; - unsigned long *ADDR = (unsigned long *) addr; + unsigned long *ADDR = (unsigned long *)addr; ADDR += nr >> 5; mask = 1 << (nr & 31); @@ -114,7 +114,7 @@ static __inline__ void change_bit(int nr, volatile void *addr) static __inline__ void __change_bit(int nr, volatile void *addr) { int mask; - unsigned long *ADDR = (unsigned long *) addr; + unsigned long *ADDR = (unsigned long *)addr; ADDR += nr >> 5; mask = 1 << (nr & 31); @@ -124,7 +124,7 @@ static __inline__ void __change_bit(int nr, volatile void *addr) static __inline__ int test_and_set_bit(int nr, volatile void *addr) { int mask, retval; - volatile unsigned int *a = (volatile unsigned int *) addr; + volatile unsigned int *a = (volatile unsigned int *)addr; unsigned long flags; a += nr >> 5; @@ -140,7 +140,7 @@ static __inline__ int test_and_set_bit(int nr, volatile void *addr) static __inline__ int __test_and_set_bit(int nr, volatile void *addr) { int mask, retval; - volatile unsigned int *a = (volatile unsigned int *) addr; + volatile unsigned int *a = (volatile unsigned int *)addr; a += nr >> 5; mask = 1 << (nr & 0x1f); @@ -152,7 +152,7 @@ static __inline__ int __test_and_set_bit(int nr, volatile void *addr) static __inline__ int test_and_clear_bit(int nr, volatile void *addr) { int mask, retval; - volatile unsigned int *a = (volatile unsigned int *) addr; + volatile unsigned int *a = (volatile unsigned int *)addr; unsigned long flags; a += nr >> 5; @@ -168,7 +168,7 @@ static __inline__ int test_and_clear_bit(int nr, volatile void *addr) static __inline__ int __test_and_clear_bit(int nr, volatile void *addr) { int mask, retval; - volatile unsigned int *a = (volatile unsigned int *) addr; + volatile unsigned int *a = (volatile unsigned int *)addr; a += nr >> 5; mask = 1 << (nr & 0x1f); @@ -180,7 +180,7 @@ static __inline__ int __test_and_clear_bit(int nr, volatile void *addr) static __inline__ int test_and_change_bit(int nr, volatile void *addr) { int mask, retval; - volatile unsigned int *a = (volatile unsigned int *) addr; + volatile unsigned int *a = (volatile unsigned int *)addr; unsigned long flags; a += nr >> 5; @@ -196,7 +196,7 @@ static __inline__ int test_and_change_bit(int nr, volatile void *addr) static __inline__ int __test_and_change_bit(int nr, volatile void *addr) { int mask, retval; - volatile unsigned int *a = (volatile unsigned int *) addr; + volatile unsigned int *a = (volatile unsigned int *)addr; a += nr >> 5; mask = 1 << (nr & 0x1f); @@ -208,16 +208,15 @@ static __inline__ int __test_and_change_bit(int nr, volatile void *addr) /* * This routine doesn't need to be atomic. */ -static __inline__ int __constant_test_bit(int nr, - const volatile void *addr) +static __inline__ int __constant_test_bit(int nr, const volatile void *addr) { return ((1UL << (nr & 31)) & - (((const volatile unsigned int *) addr)[nr >> 5])) != 0; + (((const volatile unsigned int *)addr)[nr >> 5])) != 0; } static __inline__ int __test_bit(int nr, volatile void *addr) { - int *a = (int *) addr; + int *a = (int *)addr; int mask; a += nr >> 5; @@ -235,7 +234,7 @@ static __inline__ int __test_bit(int nr, volatile void *addr) static __inline__ int find_next_zero_bit(void *addr, int size, int offset) { - unsigned long *p = ((unsigned long *) addr) + (offset >> 5); + unsigned long *p = ((unsigned long *)addr) + (offset >> 5); unsigned long result = offset & ~31UL; unsigned long tmp; @@ -290,7 +289,7 @@ static __inline__ int ext2_set_bit(int nr, volatile void *addr) { int mask, retval; unsigned long flags; - volatile unsigned char *ADDR = (unsigned char *) addr; + volatile unsigned char *ADDR = (unsigned char *)addr; ADDR += nr >> 3; mask = 1 << (nr & 0x07); @@ -305,7 +304,7 @@ static __inline__ int ext2_clear_bit(int nr, volatile void *addr) { int mask, retval; unsigned long flags; - volatile unsigned char *ADDR = (unsigned char *) addr; + volatile unsigned char *ADDR = (unsigned char *)addr; ADDR += nr >> 3; mask = 1 << (nr & 0x07); @@ -319,7 +318,7 @@ static __inline__ int ext2_clear_bit(int nr, volatile void *addr) static __inline__ int ext2_test_bit(int nr, const volatile void *addr) { int mask; - const volatile unsigned char *ADDR = (const unsigned char *) addr; + const volatile unsigned char *ADDR = (const unsigned char *)addr; ADDR += nr >> 3; mask = 1 << (nr & 0x07); @@ -331,10 +330,9 @@ static __inline__ int ext2_test_bit(int nr, const volatile void *addr) static __inline__ unsigned long ext2_find_next_zero_bit(void *addr, unsigned long size, - unsigned long - offset) + unsigned long offset) { - unsigned long *p = ((unsigned long *) addr) + (offset >> 5); + unsigned long *p = ((unsigned long *)addr) + (offset >> 5); unsigned long result = offset & ~31UL; unsigned long tmp; diff --git a/include/asm-blackfin/blackfin.h b/include/asm-blackfin/blackfin.h index fbdbf30..0ec9207 100644 --- a/include/asm-blackfin/blackfin.h +++ b/include/asm-blackfin/blackfin.h @@ -25,22 +25,16 @@ #ifndef _BLACKFIN_H_ #define _BLACKFIN_H_ -#include <asm/cpu/defBF533.h> -#include <asm/cpu/bf533_serial.h> +#if !(defined(__ASSEMBLY__) || defined(ASSEMBLY)) +# ifdef SHARED_RESOURCES +# include <asm/shared_resources.h> +# endif -#ifndef __ASSEMBLY__ -#ifndef ASSEMBLY +# include <linux/types.h> -#ifdef SHARED_RESOURCES - #include <asm/shared_resources.h> +extern u_long get_sclk(void); #endif -#include <asm/cpu/cdefBF53x.h> -#endif -#endif - -#include <asm/cpu/defBF533.h> -#include <asm/cpu/defBF533_extn.h> -#include <asm/cpu/bf533_serial.h> +#include <asm/arch-common/cdefBF5xx.h> #endif diff --git a/include/asm-blackfin/cplb.h b/include/asm-blackfin/cplb.h index 7715f64..dd695e1 100644 --- a/include/asm-blackfin/cplb.h +++ b/include/asm-blackfin/cplb.h @@ -7,14 +7,15 @@ ************************************************************************/ /* Defines necessary for cplb initialisation routines. */ - #ifndef _CPLB_H #define _CPLB_H +#define CONFIG_BLKFIN_WT + #define CPLB_ENABLE_ICACHE_P 0 #define CPLB_ENABLE_DCACHE_P 1 #define CPLB_ENABLE_DCACHE2_P 2 -#define CPLB_ENABLE_CPLBS_P 3 /* Deprecated!*/ +#define CPLB_ENABLE_CPLBS_P 3 /* Deprecated! */ #define CPLB_ENABLE_ICPLBS_P 4 #define CPLB_ENABLE_DCPLBS_P 5 @@ -45,4 +46,35 @@ #define CPLB_INOCACHE CPLB_USER_RD | CPLB_VALID #define CPLB_IDOCACHE CPLB_INOCACHE | CPLB_L1_CHBL -#endif /* _CPLB_H */ +/* Data Attibutes*/ + +#define SDRAM_IGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID) +#define SDRAM_IKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) +#define L1_IMEMORY (PAGE_SIZE_1MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) +#define SDRAM_INON_CHBL (PAGE_SIZE_4MB | CPLB_USER_RD | CPLB_VALID) + +/*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/ + +#define ANOMALY_05000158 0x200 + +#ifdef CONFIG_BLKFIN_WB /*Write Back Policy */ +#define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) +#define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) +#define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_USER_WR | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158) +#define L1_DMEMORY (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) +#define SDRAM_EBIU (PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158) + +#else /*Write Through */ +#define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) +#define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) +#define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158) +#define L1_DMEMORY (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_L1_AOW | CPLB_WT | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) +#define SDRAM_EBIU (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158) +#endif + +#if defined(CONFIG_BF561) +#define page_descriptor_table_size (CONFIG_MEM_SIZE/4 + 2) /* SDRAM +L1 + ASYNC_Memory */ +#else +#define page_descriptor_table_size (CONFIG_MEM_SIZE/4 + 1 + 3) /* SDRAM + L1 + ASYNC_Memory */ +#endif +#endif /* _CPLB_H */ diff --git a/include/asm-blackfin/cplbtab.h b/include/asm-blackfin/cplbtab.h deleted file mode 100644 index ab7d989..0000000 --- a/include/asm-blackfin/cplbtab.h +++ /dev/null @@ -1,572 +0,0 @@ -/*This file is subject to the terms and conditions of the GNU General Public - * License. - * - * Blackfin BF533/2.6 support : LG Soft India - * Updated : Ashutosh Singh / Jahid Khan : Rrap Software Pvt Ltd - * Updated : 1. SDRAM_KERNEL, SDRAM_DKENEL are added as initial cplb's - * shouldn't be victimized. cplbmgr.S search logic is corrected - * to findout the appropriate victim. - * 2. SDRAM_IGENERIC in dpdt_table is replaced with SDRAM_DGENERIC - * : LG Soft India - */ -#include <config.h> - -#ifndef __ARCH_BFINNOMMU_CPLBTAB_H -#define __ARCH_BFINNOMMU_CPLBTAB_H - -/************************************************************************* - * ICPLB TABLE - *************************************************************************/ - -.data - -/* This table is configurable */ - -.align 4; - -/* Data Attibutes*/ - -#define SDRAM_IGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID) -#define SDRAM_IKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) -#define L1_IMEMORY (PAGE_SIZE_1MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) -#define SDRAM_INON_CHBL (PAGE_SIZE_4MB | CPLB_USER_RD | CPLB_VALID) - -/*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/ - -#define ANOMALY_05000158 0x200 -#ifdef CONFIG_BLKFIN_WB /*Write Back Policy */ - #define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) - #define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) - #define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_USER_WR | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158) - #define L1_DMEMORY (PAGE_SIZE_4KB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) - #define SDRAM_EBIU (PAGE_SIZE_1MB | CPLB_DIRTY | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158) - -#else /*Write Through*/ - #define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) - #define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158) - #define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158) - #define L1_DMEMORY (PAGE_SIZE_4KB | CPLB_L1_CHBL | CPLB_L1_AOW | CPLB_WT | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158) - #define SDRAM_EBIU (PAGE_SIZE_1MB | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158) -#endif - -.global icplb_table -icplb_table: -.byte4 0xFFA00000; -.byte4 (L1_IMEMORY); -.byte4 0x00000000; -.byte4 (SDRAM_IKERNEL); /*SDRAM_Page1*/ -.byte4 0x00400000; -.byte4 (SDRAM_IKERNEL); /*SDRAM_Page1*/ -.byte4 0x07C00000; -.byte4 (SDRAM_IKERNEL); /*SDRAM_Page14*/ -.byte4 0x00800000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page2*/ -.byte4 0x00C00000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page2*/ -.byte4 0x01000000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page4*/ -.byte4 0x01400000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page5*/ -.byte4 0x01800000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page6*/ -.byte4 0x01C00000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page7*/ -#ifndef CONFIG_EZKIT /*STAMP Memory regions*/ -.byte4 0x02000000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page8*/ -.byte4 0x02400000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page9*/ -.byte4 0x02800000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page10*/ -.byte4 0x02C00000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page11*/ -.byte4 0x03000000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page12*/ -.byte4 0x03400000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page13*/ -#endif -.byte4 0xffffffff; /* end of section - termination*/ - -.align 4; -.global ipdt_table -ipdt_table: -#ifdef CONFIG_CPLB_INFO -.byte4 0x00000000; -.byte4 (SDRAM_IKERNEL); /*SDRAM_Page0*/ -.byte4 0x00400000; -.byte4 (SDRAM_IKERNEL); /*SDRAM_Page1*/ -#endif -.byte4 0x00800000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page2*/ -.byte4 0x00C00000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page3*/ -.byte4 0x01000000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page4*/ -.byte4 0x01400000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page5*/ -.byte4 0x01800000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page6*/ -.byte4 0x01C00000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page7*/ -#ifndef CONFIG_EZKIT /*STAMP Memory regions*/ -.byte4 0x02000000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page8*/ -.byte4 0x02400000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page9*/ -.byte4 0x02800000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page10*/ -.byte4 0x02C00000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page11*/ -.byte4 0x03000000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page12*/ -.byte4 0x03400000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page13*/ -.byte4 0x03800000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page14*/ -.byte4 0x03C00000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page15*/ -#endif -.byte4 0x20200000; -.byte4 (SDRAM_EBIU); /* Async Memory Bank 2 (Secnd)*/ -.byte4 0x20100000; -.byte4 (SDRAM_EBIU); /* Async Memory Bank 1 (Prim B)*/ -.byte4 0x20000000; -.byte4 (SDRAM_EBIU); /* Async Memory Bank 0 (Prim A)*/ -.byte4 0x20300000; /*Fix for Network*/ -.byte4 (SDRAM_EBIU); /*Async Memory bank 3*/ - -#ifdef CONFIG_STAMP -.byte4 0x04000000; -.byte4 (SDRAM_IGENERIC); -.byte4 0x04400000; -.byte4 (SDRAM_IGENERIC); -.byte4 0x04800000; -.byte4 (SDRAM_IGENERIC); -.byte4 0x04C00000; -.byte4 (SDRAM_IGENERIC); -.byte4 0x05000000; -.byte4 (SDRAM_IGENERIC); -.byte4 0x05400000; -.byte4 (SDRAM_IGENERIC); -.byte4 0x05800000; -.byte4 (SDRAM_IGENERIC); -.byte4 0x05C00000; -.byte4 (SDRAM_IGENERIC); -.byte4 0x06000000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page25*/ -.byte4 0x06400000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page26*/ -.byte4 0x06800000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page27*/ -.byte4 0x06C00000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page28*/ -.byte4 0x07000000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page29*/ -.byte4 0x07400000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page30*/ -.byte4 0x07800000; -.byte4 (SDRAM_IGENERIC); /*SDRAM_Page31*/ -#ifdef CONFIG_CPLB_INFO -.byte4 0x07C00000; -.byte4 (SDRAM_IKERNEL); /*SDRAM_Page32*/ -#endif -#endif -.byte4 0xffffffff; /* end of section - termination*/ - -/********************************************************************* - * DCPLB TABLE - ********************************************************************/ - -.global dcplb_table -dcplb_table: -.byte4 0x00000000; -.byte4 (SDRAM_DKERNEL); /*SDRAM_Page1*/ -.byte4 0x00400000; -.byte4 (SDRAM_DKERNEL); /*SDRAM_Page1*/ -.byte4 0x07C00000; -.byte4 (SDRAM_DKERNEL); /*SDRAM_Page15*/ -.byte4 0x00800000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page2*/ -.byte4 0x00C00000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page3*/ -.byte4 0x01000000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page4*/ -.byte4 0x01400000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page5*/ -.byte4 0x01800000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page6*/ -.byte4 0x01C00000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page7*/ -#ifndef CONFIG_EZKIT -.byte4 0x02000000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page8*/ -.byte4 0x02400000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page9*/ -.byte4 0x02800000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page10*/ -.byte4 0x02C00000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page11*/ -.byte4 0x03000000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page12*/ -.byte4 0x03400000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page13*/ -.byte4 0x03800000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page14*/ -#endif -.byte4 0xffffffff; /*end of section - termination*/ - -/********************************************************************** - * PAGE DESCRIPTOR TABLE - * - **********************************************************************/ - -/* Till here we are discussing about the static memory management model. - * However, the operating envoronments commonly define more CPLB - * descriptors to cover the entire addressable memory than will fit into - * the available on-chip 16 CPLB MMRs. When this happens, the below table - * will be used which will hold all the potentially required CPLB descriptors - * - * This is how Page descriptor Table is implemented in uClinux/Blackfin. - */ -.global dpdt_table -dpdt_table: -#ifdef CONFIG_CPLB_INFO -.byte4 0x00000000; -.byte4 (SDRAM_DKERNEL); /*SDRAM_Page0*/ -.byte4 0x00400000; -.byte4 (SDRAM_DKERNEL); /*SDRAM_Page1*/ -#endif -.byte4 0x00800000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page2*/ -.byte4 0x00C00000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page3*/ -.byte4 0x01000000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page4*/ -.byte4 0x01400000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page5*/ -.byte4 0x01800000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page6*/ -.byte4 0x01C00000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page7*/ - -#ifndef CONFIG_EZKIT -.byte4 0x02000000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page8*/ -.byte4 0x02400000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page9*/ -.byte4 0x02800000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page10*/ -.byte4 0x02C00000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page11*/ -.byte4 0x03000000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page12*/ -.byte4 0x03400000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page13*/ -.byte4 0x03800000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page14*/ -.byte4 0x03C00000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page15*/ -#endif -.byte4 0x20200000; -.byte4 (SDRAM_EBIU); /* Async Memory Bank 2 (Secnd)*/ -.byte4 0x20100000; -.byte4 (SDRAM_EBIU); /* Async Memory Bank 1 (Prim B)*/ -.byte4 0x20000000; -.byte4 (SDRAM_EBIU); /* Async Memory Bank 0 (Prim A)*/ -.byte4 0x20300000; /*Fix for Network*/ -.byte4 (SDRAM_EBIU); /*Async Memory bank 3*/ - -#ifdef CONFIG_STAMP -.byte4 0x04000000; -.byte4 (SDRAM_DGENERIC); -.byte4 0x04400000; -.byte4 (SDRAM_DGENERIC); -.byte4 0x04800000; -.byte4 (SDRAM_DGENERIC); -.byte4 0x04C00000; -.byte4 (SDRAM_DGENERIC); -.byte4 0x05000000; -.byte4 (SDRAM_DGENERIC); -.byte4 0x05400000; -.byte4 (SDRAM_DGENERIC); -.byte4 0x05800000; -.byte4 (SDRAM_DGENERIC); -.byte4 0x05C00000; -.byte4 (SDRAM_DGENERIC); -.byte4 0x06000000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page25*/ -.byte4 0x06400000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page26*/ -.byte4 0x06800000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page27*/ -.byte4 0x06C00000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page28*/ -.byte4 0x07000000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page29*/ -.byte4 0x07400000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page30*/ -.byte4 0x07800000; -.byte4 (SDRAM_DGENERIC); /*SDRAM_Page31*/ -#ifdef CONFIG_CPLB_INFO -.byte4 0x07C00000; -.byte4 (SDRAM_DKERNEL); /*SDRAM_Page32*/ -#endif -#endif - -.byte4 0xFF900000; -.byte4 (L1_DMEMORY); -.byte4 0xFF901000; -.byte4 (L1_DMEMORY); -.byte4 0xFF902000; -.byte4 (L1_DMEMORY); -.byte4 0xFF903000; -.byte4 (L1_DMEMORY); -.byte4 0xFF904000; -.byte4 (L1_DMEMORY); -.byte4 0xFF905000; -.byte4 (L1_DMEMORY); -.byte4 0xFF906000; -.byte4 (L1_DMEMORY); -.byte4 0xFF907000; -.byte4 (L1_DMEMORY); -.byte4 0xFF800000; -.byte4 (L1_DMEMORY); -.byte4 0xFF801000; -.byte4 (L1_DMEMORY); -.byte4 0xFF802000; -.byte4 (L1_DMEMORY); -.byte4 0xFF803000; -.byte4 (L1_DMEMORY); - -.byte4 0xffffffff; /*end of section - termination*/ - -#ifdef CONFIG_CPLB_INFO -.global ipdt_swapcount_table; /* swapin count first, then swapout count*/ -ipdt_swapcount_table: -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 10 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 20 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 30 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 40 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 50 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 60 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 70 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 80 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 90 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 100 */ - -.global dpdt_swapcount_table; /* swapin count first, then swapout count*/ -dpdt_swapcount_table: -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 10 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 20 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 30 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 40 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 50 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 60 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 70 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 80 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 80 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 100 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 110 */ -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; -.byte4 0x00000000; /* 120 */ - -#endif - -#endif /*__ARCH_BFINNOMMU_CPLBTAB_H*/ diff --git a/include/asm-blackfin/cpu/cdefBF53x.h b/include/asm-blackfin/cpu/cdefBF53x.h deleted file mode 100644 index db4eaa9..0000000 --- a/include/asm-blackfin/cpu/cdefBF53x.h +++ /dev/null @@ -1,32 +0,0 @@ -/************************************************************************ - * - * cdefBF53x.h - * - * (c) Copyright 2002-2003 Analog Devices, Inc. All rights reserved. - * - ************************************************************************/ - -#ifndef _CDEFBF53x_H -#define _CDEFBF53x_H - -#if defined(__ADSPBF531__) - #include <asm/cpu/cdefBF531.h> -#elif defined(__ADSPBF532__) - #include <asm/cpu/cdefBF532.h> -#elif defined(__ADSPBF533__) - #include <asm/cpu/cdefBF533.h> -#elif defined(__ADSPBF561__) - #include <asm/cpu/cdefBF561.h> -#elif defined(__ADSPBF535__) - #include <asm/cpu/cdefBF535.h> -#elif defined(__AD6532__) - #include <sam/cpu/cdefAD6532.h> -#else - #if defined(__ADSPLPBLACKFIN__) - #include <asm/cpu/cdefBF532.h> - #else - #include <asm/cpu/cdefBF535.h> - #endif -#endif - -#endif /* _CDEFBF53x_H */ diff --git a/include/asm-blackfin/delay.h b/include/asm-blackfin/delay.h index dbb7388..0c01e9f 100644 --- a/include/asm-blackfin/delay.h +++ b/include/asm-blackfin/delay.h @@ -35,9 +35,9 @@ extern __inline__ void __delay(unsigned long loops) { __asm__ __volatile__("1:\t%0 += -1;\n\t" - "cc = %0 == 0;\n\t" - "if ! cc jump 1b;\n":"=d"(loops) - :"0"(loops)); + "cc = %0 == 0;\n\t" + "if ! cc jump 1b;\n":"=d"(loops) + :"0"(loops)); } /* diff --git a/include/asm-blackfin/entry.h b/include/asm-blackfin/entry.h index 607a5b8..b64d406 100644 --- a/include/asm-blackfin/entry.h +++ b/include/asm-blackfin/entry.h @@ -370,16 +370,12 @@ #define STR1(X) #X #if defined(NEW_PT_REGS) - #define PT_OFF_ORIG_R0 208 #define PT_OFF_SR 8 - #else - #define PT_OFF_ORIG_R0 0x54 #define PT_OFF_SR 0x38 /* seqstat in pt_regs */ - -#endif #endif #endif +#endif diff --git a/include/asm-blackfin/global_data.h b/include/asm-blackfin/global_data.h index 56a12f0..1c73853 100644 --- a/include/asm-blackfin/global_data.h +++ b/include/asm-blackfin/global_data.h @@ -45,11 +45,16 @@ typedef struct global_data { unsigned long board_type; unsigned long baudrate; unsigned long have_console; /* serial_init() was called */ - unsigned long ram_size; /* RAM size */ + unsigned long ram_size; /* RAM size */ unsigned long reloc_off; /* Relocation Offset */ - unsigned long env_addr; /* Address of Environment struct */ + unsigned long env_addr; /* Address of Environment struct */ unsigned long env_valid; /* Checksum of Environment valid? */ - void **jt; /* jump table */ +#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER) + unsigned long post_log_word; /* Record POST activities */ + unsigned long post_init_f_time; /* When post_init_f started */ +#endif + + void **jt; /* jump table */ } gd_t; /* @@ -59,6 +64,6 @@ typedef struct global_data { #define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */ #define GD_FLG_SILENT 0x00004 /* Silent mode */ -#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("P5") +#define DECLARE_GLOBAL_DATA_PTR register gd_t * volatile gd asm ("P5") #endif diff --git a/include/asm-blackfin/hw_irq.h b/include/asm-blackfin/hw_irq.h index 1ee050e..baa3e0c 100644 --- a/include/asm-blackfin/hw_irq.h +++ b/include/asm-blackfin/hw_irq.h @@ -30,8 +30,14 @@ #include <linux/config.h> #ifdef CONFIG_EZKIT533 -#include <asm/board/bf533_irq.h> +#include <asm/arch-bf533/irq.h> +#endif +#ifdef CONFIG_EZKIT561 +#include <asm/arch-bf561/irq.h> #endif #ifdef CONFIG_STAMP -#include <asm/board/bf533_irq.h> +#include <asm/arch-bf533/irq.h> +#endif +#ifdef CONFIG_BF537 +#include <asm/arch-bf537/irq.h> #endif diff --git a/include/asm-blackfin/io-kernel.h b/include/asm-blackfin/io-kernel.h index 0b0572f..3c087c3 100644 --- a/include/asm-blackfin/io-kernel.h +++ b/include/asm-blackfin/io-kernel.h @@ -87,7 +87,8 @@ #define IOMAP_WRITETHROUGH 3 #ifndef __ASSEMBLY__ -extern void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag); +extern void *__ioremap(unsigned long physaddr, unsigned long size, + int cacheflag); extern void __iounmap(void *addr, unsigned long size); extern inline void *ioremap(unsigned long physaddr, unsigned long size) { @@ -97,11 +98,13 @@ extern inline void *ioremap_nocache(unsigned long physaddr, unsigned long size) { return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); } -extern inline void *ioremap_writethrough(unsigned long physaddr, unsigned long size) +extern inline void *ioremap_writethrough(unsigned long physaddr, + unsigned long size) { return __ioremap(physaddr, size, IOMAP_WRITETHROUGH); } -extern inline void *ioremap_fullcache(unsigned long physaddr, unsigned long size) +extern inline void *ioremap_fullcache(unsigned long physaddr, + unsigned long size) { return __ioremap(physaddr, size, IOMAP_FULL_CACHING); } diff --git a/include/asm-blackfin/io.h b/include/asm-blackfin/io.h index fc27194..6bab6e7 100644 --- a/include/asm-blackfin/io.h +++ b/include/asm-blackfin/io.h @@ -25,11 +25,6 @@ #ifndef _BLACKFIN_IO_H #define _BLACKFIN_IO_H -static inline void sync(void) -{ - __asm__ __volatile__ asm("ssync" : : : "memory"); -} - #ifdef __KERNEL__ #include <linux/config.h> @@ -38,7 +33,11 @@ static inline void sync(void) extern void cf_outsw(unsigned short *addr, unsigned short *sect_buf, int words); extern void cf_insw(unsigned short *sect_buf, unsigned short *addr, int words); extern unsigned char cf_inb(volatile unsigned char *addr); -extern void cf_outb(unsigned char val, volatile unsigned char* addr); +extern void cf_outb(unsigned char val, volatile unsigned char *addr); + +static inline void sync(void) +{ +} /* * These are for ISA/PCI shared memory _only_ and should never be used @@ -51,7 +50,6 @@ extern void cf_outb(unsigned char val, volatile unsigned char* addr); * memory location directly. */ - #define readb(addr) ({ unsigned char __v = (*(volatile unsigned char *) (addr));asm("ssync;"); __v; }) #define readw(addr) ({ unsigned short __v = (*(volatile unsigned short *) (addr)); asm("ssync;");__v; }) #define readl(addr) ({ unsigned int __v = (*(volatile unsigned int *) (addr));asm("ssync;"); __v; }) @@ -100,8 +98,7 @@ extern inline void *ioremap(unsigned long physaddr, unsigned long size) { return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); } -extern inline void *ioremap_nocache(unsigned long physaddr, - unsigned long size) +extern inline void *ioremap_nocache(unsigned long physaddr, unsigned long size) { return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); } diff --git a/include/asm-blackfin/irq.h b/include/asm-blackfin/irq.h index 5fbc5a3..aede742 100644 --- a/include/asm-blackfin/irq.h +++ b/include/asm-blackfin/irq.h @@ -39,7 +39,7 @@ #define _BLACKFIN_IRQ_H_ #include <linux/config.h> -#include <asm/cpu/bf533_irq.h> +#include <asm/hw_irq.h> /* * On the Blackfin, the interrupt structure allows remmapping of the hardware @@ -85,8 +85,8 @@ static __inline__ int irq_cannonicalize(int irq) extern void (*mach_enable_irq) (unsigned int); extern void (*mach_disable_irq) (unsigned int); extern int sys_request_irq(unsigned int, - void (*)(int, void *, struct pt_regs *), - unsigned long, const char *, void *); + void (*)(int, void *, struct pt_regs *), + unsigned long, const char *, void *); extern void sys_free_irq(unsigned int, void *); /* diff --git a/include/asm-blackfin/machdep.h b/include/asm-blackfin/machdep.h index 0a43ba1..4fea74c 100644 --- a/include/asm-blackfin/machdep.h +++ b/include/asm-blackfin/machdep.h @@ -39,7 +39,8 @@ struct hwclk_time; struct gendisk; struct buffer_head; -extern void (*mach_sched_init) (void (*handler) (int, void *, struct pt_regs *)); +extern + void (*mach_sched_init) (void (*handler) (int, void *, struct pt_regs *)); /* machine dependent keyboard functions */ extern int (*mach_keyb_init) (void); diff --git a/include/asm-blackfin/mem_init.h b/include/asm-blackfin/mem_init.h index 1a13d90..d9d8bf9 100644 --- a/include/asm-blackfin/mem_init.h +++ b/include/asm-blackfin/mem_init.h @@ -22,7 +22,13 @@ * MA 02111-1307 USA */ -#if ( CONFIG_MEM_MT48LC16M16A2TG_75 || CONFIG_MEM_MT48LC64M4A2FB_7E ) +#if (CONFIG_MEM_MT48LC16M16A2TG_75 || \ + CONFIG_MEM_MT48LC64M4A2FB_7E || \ + CONFIG_MEM_MT48LC16M8A2TG_75 || \ + CONFIG_MEM_MT48LC8M16A2TG_7E || \ + CONFIG_MEM_MT48LC8M32B2B5_7 || \ + CONFIG_MEM_MT48LC32M8A2_75) + #if ( CONFIG_SCLK_HZ > 119402985 ) #define SDRAM_tRP TRP_2 #define SDRAM_tRP_num 2 @@ -66,7 +72,7 @@ #if ( CONFIG_SCLK_HZ > 59701493 ) && ( CONFIG_SCLK_HZ <= 66666667 ) #define SDRAM_tRP TRP_1 #define SDRAM_tRP_num 1 - #define SDRAM_tRAS TRAS_4 + #define SDRAM_tRAS TRAS_3 #define SDRAM_tRAS_num 3 #define SDRAM_tRCD TRCD_1 #define SDRAM_tWR TWR_2 @@ -99,18 +105,46 @@ #if (CONFIG_MEM_MT48LC16M16A2TG_75) /*SDRAM INFORMATION: */ - #define SDRAM_Tref 64 /* Refresh period in milliseconds */ - #define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ + #define SDRAM_Tref 64 /* Refresh period in milliseconds */ + #define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ #define SDRAM_CL CL_3 #endif #if (CONFIG_MEM_MT48LC64M4A2FB_7E) /*SDRAM INFORMATION: */ - #define SDRAM_Tref 64 /* Refresh period in milliseconds */ - #define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ + #define SDRAM_Tref 64 /* Refresh period in milliseconds */ + #define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ + #define SDRAM_CL CL_2 +#endif + +#if (CONFIG_MEM_MT48LC16M8A2TG_75) + /*SDRAM INFORMATION: */ + #define SDRAM_Tref 64 /* Refresh period in milliseconds */ + #define SDRAM_NRA 4096 /* Number of row addresses in SDRAM */ + #define SDRAM_CL CL_3 +#endif + +#if (CONFIG_MEM_MT48LC32M8A2_75) +/*SDRAM INFORMATION: */ +#define SDRAM_Tref 64 /* Refresh period in milliseconds */ +#define SDRAM_NRA 8192 /* Number of row addresses in SDRAM */ +#define SDRAM_CL CL_3 +#endif + +#if (CONFIG_MEM_MT48LC8M16A2TG_7E) + /*SDRAM INFORMATION: */ + #define SDRAM_Tref 64 /* Refresh period in milliseconds */ + #define SDRAM_NRA 4096 /* Number of row addresses in SDRAM */ #define SDRAM_CL CL_2 #endif +#if (CONFIG_MEM_MT48LC8M32B2B5_7) + /*SDRAM INFORMATION: */ + #define SDRAM_Tref 64 /* Refresh period in milliseconds */ + #define SDRAM_NRA 4096 /* Number of row addresses in SDRAM */ + #define SDRAM_CL CL_3 +#endif + #if ( CONFIG_MEM_SIZE == 128 ) #define SDRAM_SIZE EBSZ_128 #endif diff --git a/include/asm-blackfin/page.h b/include/asm-blackfin/page.h index 406ece5..d59828c 100644 --- a/include/asm-blackfin/page.h +++ b/include/asm-blackfin/page.h @@ -112,11 +112,6 @@ extern __inline__ int get_order(unsigned long size) #define virt_to_page(addr) (mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT)) #define VALID_PAGE(page) ((page - mem_map) < max_mapnr) -#define BUG() do { \ - \ - while (1); /* dead-loop */ \ -} while (0) - #define PAGE_BUG(page) do { \ BUG(); \ } while (0) diff --git a/include/asm-blackfin/processor.h b/include/asm-blackfin/processor.h index 19bd720..df49bed 100644 --- a/include/asm-blackfin/processor.h +++ b/include/asm-blackfin/processor.h @@ -126,8 +126,7 @@ static inline void release_thread(struct task_struct *dead_task) { } -extern int kernel_thread(int (*fn) (void *), void *arg, - unsigned long flags); +extern int kernel_thread(int (*fn) (void *), void *arg, unsigned long flags); #define copy_segments(tsk, mm) do { } while (0) #define release_segments(mm) do { } while (0) diff --git a/include/asm-blackfin/setup.h b/include/asm-blackfin/setup.h index 6ce9688..a3c1715 100644 --- a/include/asm-blackfin/setup.h +++ b/include/asm-blackfin/setup.h @@ -75,12 +75,13 @@ extern unsigned long vme_brdtype; extern int blackfin_num_memory; /* # of memory blocks found (and used) */ extern int blackfin_realnum_memory; /* real # of memory blocks found */ -extern struct mem_info blackfin_memory[NUM_MEMINFO]; /* memory description */ struct mem_info { unsigned long addr; /* physical address of memory chunk */ unsigned long size; /* length of memory chunk (in bytes) */ }; + +extern struct mem_info blackfin_memory[NUM_MEMINFO]; /* memory description */ #endif #endif diff --git a/include/asm-blackfin/string.h b/include/asm-blackfin/string.h index ffd81d6..aac6bc9 100644 --- a/include/asm-blackfin/string.h +++ b/include/asm-blackfin/string.h @@ -31,21 +31,26 @@ #include <asm/setup.h> #include <asm/page.h> -#include <asm/cpu/defBF533.h> +#include <config.h> +#include <asm/blackfin.h> #define __HAVE_ARCH_STRCPY #define __HAVE_ARCH_STRNCPY #define __HAVE_ARCH_STRCMP #define __HAVE_ARCH_STRNCMP #define __HAVE_ARCH_MEMCPY +#define __HAVE_ARCH_MEMCMP +#define __HAVE_ARCH_MEMSET +#define __HAVE_ARCH_MEMMOVE extern char *strcpy(char *dest, const char *src); extern char *strncpy(char *dest, const char *src, size_t n); extern int strcmp(const char *cs, const char *ct); extern int strncmp(const char *cs, const char *ct, size_t count); -extern void * memcpy(void * dest,const void *src,size_t count); +extern void *memcpy(void *dest, const void *src, size_t count); extern void *memset(void *s, int c, size_t count); extern int memcmp(const void *, const void *, __kernel_size_t); +extern void *memmove(void *dest, const void *src, size_t count); #else /* KERNEL */ diff --git a/include/asm-blackfin/u-boot.h b/include/asm-blackfin/u-boot.h index ec39338..e1a435a 100644 --- a/include/asm-blackfin/u-boot.h +++ b/include/asm-blackfin/u-boot.h @@ -29,7 +29,7 @@ #define _U_BOOT_H_ 1 typedef struct bd_info { - int bi_baudrate; /* serial console baudrate */ + int bi_baudrate; /* serial console baudrate */ unsigned long bi_ip_addr; /* IP Address */ unsigned char bi_enetaddr[6]; /* Ethernet adress */ unsigned long bi_arch_number; /* unique id for this board */ diff --git a/include/asm-blackfin/uaccess.h b/include/asm-blackfin/uaccess.h index 8578166..61e2bfe 100644 --- a/include/asm-blackfin/uaccess.h +++ b/include/asm-blackfin/uaccess.h @@ -41,11 +41,10 @@ /* We let the MMU do all checking */ static inline int access_ok(int type, const void *addr, unsigned long size) { - return ((unsigned long) addr < 0x10f00000); /* need final decision - Tony */ + return ((unsigned long)addr < 0x10f00000); /* need final decision - Tony */ } -static inline int verify_area(int type, const void *addr, - unsigned long size) +static inline int verify_area(int type, const void *addr, unsigned long size) { return access_ok(type, addr, size) ? 0 : -EFAULT; } @@ -173,12 +172,11 @@ static inline int bad_user_access_length(void) * Copy a null terminated string from userspace. */ -static inline long strncpy_from_user(char *dst, const char *src, - long count) +static inline long strncpy_from_user(char *dst, const char *src, long count) { char *tmp; strncpy(dst, src, count); - for (tmp = dst; *tmp && count > 0; tmp++, count--); + for (tmp = dst; *tmp && count > 0; tmp++, count--) ; return (tmp - dst); /* DAVIDM should we count a NUL ? check getname */ } diff --git a/include/configs/bf533-ezkit.h b/include/configs/bf533-ezkit.h new file mode 100644 index 0000000..65dfc81 --- /dev/null +++ b/include/configs/bf533-ezkit.h @@ -0,0 +1,228 @@ +/* + * U-boot - Configuration file for BF533 EZKIT board + */ + +#ifndef __CONFIG_EZKIT533_H__ +#define __CONFIG_EZKIT533_H__ + +#define CONFIG_BAUDRATE 57600 +#define CONFIG_STAMP 1 + +#define CONFIG_BOOTDELAY 5 +#define CFG_AUTOLOAD "no" /*rarpb, bootp or dhcp commands will perform only a */ + +#define CFG_LONGHELP 1 +#define CONFIG_CMDLINE_EDITING 1 +#define CONFIG_LOADADDR 0x01000000 /* default load address */ +#define CONFIG_BOOTCOMMAND "tftp $(loadaddr) linux" +/* #define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw" */ + +#define CONFIG_DRIVER_SMC91111 1 +#define CONFIG_SMC91111_BASE 0x20310300 + +#if 0 +#define CONFIG_MII +#define CFG_DISCOVER_PHY +#endif + +#define CONFIG_RTC_BFIN 1 +#define CONFIG_BOOT_RETRY_TIME -1 /* Enable this if bootretry required, currently its disabled */ + +/* + * Boot Mode Set + * Blackfin can support several boot modes + */ +#define BF533_BYPASS_BOOT 0x0001 /* Bootmode 0: Execute from 16-bit externeal memory ( bypass BOOT ROM) */ +#define BF533_PARA_BOOT 0x0002 /* Bootmode 1: Boot from 8-bit or 16-bit flash */ +#define BF533_SPI_BOOT 0x0004 /* Bootmode 3: Boot from SPI flash */ +/* Define the boot mode */ +#define BFIN_BOOT_MODE BF533_BYPASS_BOOT +/* #define BFIN_BOOT_MODE BF533_SPI_BOOT */ + +#define CONFIG_PANIC_HANG 1 + +#define ADSP_BF531 0x31 +#define ADSP_BF532 0x32 +#define ADSP_BF533 0x33 +#define BFIN_CPU ADSP_BF533 + +/* This sets the default state of the cache on U-Boot's boot */ +#define CONFIG_ICACHE_ON +#define CONFIG_DCACHE_ON + +/* Define where the uboot will be loaded by on-chip boot rom */ +#define APP_ENTRY 0x00001000 + +/* CONFIG_CLKIN_HZ is any value in Hz */ +#define CONFIG_CLKIN_HZ 27000000 +/* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN */ +/* 1=CLKIN/2 */ +#define CONFIG_CLKIN_HALF 0 +/* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass */ +/* 1=bypass PLL */ +#define CONFIG_PLL_BYPASS 0 +/* CONFIG_VCO_MULT controls what the multiplier of the PLL is. */ +/* Values can range from 1-64 */ +#define CONFIG_VCO_MULT 22 +/* CONFIG_CCLK_DIV controls what the core clock divider is */ +/* Values can be 1, 2, 4, or 8 ONLY */ +#define CONFIG_CCLK_DIV 1 +/* CONFIG_SCLK_DIV controls what the peripheral clock divider is */ +/* Values can range from 1-15 */ +#define CONFIG_SCLK_DIV 5 +/* CONFIG_SPI_BAUD controls the SPI peripheral clock divider */ +/* Values can range from 2-65535 */ +/* SCK Frequency = SCLK / (2 * CONFIG_SPI_BAUD) */ +#define CONFIG_SPI_BAUD 2 +#define CONFIG_SPI_BAUD_INITBLOCK 4 + +#if ( CONFIG_CLKIN_HALF == 0 ) +#define CONFIG_VCO_HZ ( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) +#else +#define CONFIG_VCO_HZ (( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) / 2 ) +#endif + +#if (CONFIG_PLL_BYPASS == 0) +#define CONFIG_CCLK_HZ ( CONFIG_VCO_HZ / CONFIG_CCLK_DIV ) +#define CONFIG_SCLK_HZ ( CONFIG_VCO_HZ / CONFIG_SCLK_DIV ) +#else +#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ +#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ +#endif + +#define CONFIG_MEM_SIZE 32 /* 128, 64, 32, 16 */ +#define CONFIG_MEM_ADD_WDTH 9 /* 8, 9, 10, 11 */ +#define CONFIG_MEM_MT48LC16M16A2TG_75 1 + +#define CONFIG_LOADS_ECHO 1 + + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_PING | \ + CFG_CMD_ELF | \ + CFG_CMD_I2C | \ + CFG_CMD_JFFS2 | \ + CFG_CMD_DATE) +#define CONFIG_BOOTARGS "root=/dev/mtdblock0 ip=192.168.0.15:192.168.0.2:192.168.0.1:255.255.255.0:ezkit:eth0:off console=ttyBF0,57600" + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#define CFG_PROMPT "ezkit> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_MEMTEST_START 0x00000000 /* memtest works on */ +#define CFG_MEMTEST_END ( (CONFIG_MEM_SIZE - 1) * 1024 * 1024) /* 1 ... 31 MB in DRAM */ +#define CFG_LOAD_ADDR 0x01000000 /* default load address */ +#define CFG_HZ 1000 /* decrementer freq: 10 ms ticks */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_MAX_RAM_SIZE (CONFIG_MEM_SIZE * 1024 * 1024) +#define CFG_FLASH_BASE 0x20000000 + +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MONITOR_BASE (CFG_MAX_RAM_SIZE - CFG_MONITOR_LEN) +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) +#define CFG_GBL_DATA_SIZE 0x4000 +#define CFG_GBL_DATA_ADDR (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE) +#define CONFIG_STACKBASE (CFG_GBL_DATA_ADDR - 4) + +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CFG_FLASH0_BASE 0x20000000 +#define CFG_FLASH1_BASE 0x20200000 +#define CFG_FLASH2_BASE 0x20280000 +#define CFG_MAX_FLASH_BANKS 3 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 40 /* max number of sectors on one chip */ + +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR 0x20020000 +#define CFG_ENV_SECT_SIZE 0x10000 /* Total Size of Environment Sector */ + +/* JFFS Partition offset set */ +#define CFG_JFFS2_FIRST_BANK 0 +#define CFG_JFFS2_NUM_BANKS 1 +/* 512k reserved for u-boot */ +#define CFG_JFFS2_FIRST_SECTOR 11 + + +/* + * Stack sizes + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ + +#define POLL_MODE 1 +#define FLASH_TOT_SECT 40 +#define FLASH_SIZE 0x220000 +#define CFG_FLASH_SIZE 0x220000 + +/* + * Initialize PSD4256 registers for using I2C + */ +#define CONFIG_MISC_INIT_R + +/* + * I2C settings + * By default PF1 is used as SDA and PF0 as SCL on the Stamp board + */ +#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */ +/* + * Software (bit-bang) I2C driver configuration + */ +#define PF_SCL PF0 +#define PF_SDA PF1 + +#define I2C_INIT (*pFIO_DIR |= PF_SCL); asm("ssync;") +#define I2C_ACTIVE (*pFIO_DIR |= PF_SDA); *pFIO_INEN &= ~PF_SDA; asm("ssync;") +#define I2C_TRISTATE (*pFIO_DIR &= ~PF_SDA); *pFIO_INEN |= PF_SDA; asm("ssync;") +#define I2C_READ ((volatile)(*pFIO_FLAG_D & PF_SDA) != 0); asm("ssync;") +#define I2C_SDA(bit) if(bit) { \ + *pFIO_FLAG_S = PF_SDA; \ + asm("ssync;"); \ + } \ + else { \ + *pFIO_FLAG_C = PF_SDA; \ + asm("ssync;"); \ + } +#define I2C_SCL(bit) if(bit) { \ + *pFIO_FLAG_S = PF_SCL; \ + asm("ssync;"); \ + } \ + else { \ + *pFIO_FLAG_C = PF_SCL; \ + asm("ssync;"); \ + } +#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ + +#define CFG_I2C_SPEED 50000 +#define CFG_I2C_SLAVE 0xFE + +#define CFG_BOOTM_LEN 0x4000000 /* Large Image Length, set to 64 Meg */ + +/* 0xFF, 0x7BB07BB0, 0x22547BB0 */ +/* #define AMGCTLVAL (AMBEN_P0 | AMBEN_P1 | AMBEN_P2 | AMCKEN) +#define AMBCTL0VAL (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B1TT_4 | ~B1RDYPOL | \ + ~B1RDYEN | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3 | B0TT_4 | ~B0RDYPOL | ~B0RDYEN) +#define AMBCTL1VAL (B3WAT_2 | B3RAT_2 | B3HT_1 | B3ST_1 | B3TT_4 | B3RDYPOL | ~B3RDYEN | \ + B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3 | B2TT_4 | ~B2RDYPOL | ~B2RDYEN) +*/ +#define AMGCTLVAL 0xFF +#define AMBCTL0VAL 0x7BB07BB0 +#define AMBCTL1VAL 0xFFC27BB0 + +#define CONFIG_VDSP 1 + +#ifdef CONFIG_VDSP +#define ET_EXEC_VDSP 0x8 +#define SHT_STRTAB_VDSP 0x1 +#define ELFSHDRSIZE_VDSP 0x2C +#define VDSP_ENTRY_ADDR 0xFFA00000 +#endif + +#endif diff --git a/include/configs/bf533-stamp.h b/include/configs/bf533-stamp.h new file mode 100644 index 0000000..79a1404 --- /dev/null +++ b/include/configs/bf533-stamp.h @@ -0,0 +1,467 @@ +/* + * U-boot - Configuration file for BF533 STAMP board + */ + +#ifndef __CONFIG_STAMP_H__ +#define __CONFIG_STAMP_H__ + +#define CONFIG_STAMP 1 +#define CONFIG_RTC_BFIN 1 +#define CONFIG_BF533 1 +/* + * Boot Mode Set + * Blackfin can support several boot modes + */ +#define BF533_BYPASS_BOOT 0x0001 /* Bootmode 0: Execute from 16-bit externeal memory ( bypass BOOT ROM) */ +#define BF533_PARA_BOOT 0x0002 /* Bootmode 1: Boot from 8-bit or 16-bit flash */ +#define BF533_SPI_BOOT 0x0004 /* Bootmode 3: Boot from SPI flash */ +/* Define the boot mode */ +#define BFIN_BOOT_MODE BF533_BYPASS_BOOT +/* #define BFIN_BOOT_MODE BF533_SPI_BOOT */ + +#define CONFIG_PANIC_HANG 1 + +#define ADSP_BF531 0x31 +#define ADSP_BF532 0x32 +#define ADSP_BF533 0x33 +#define BFIN_CPU ADSP_BF533 + +/* This sets the default state of the cache on U-Boot's boot */ +#define CONFIG_ICACHE_ON +#define CONFIG_DCACHE_ON + +/* Define where the uboot will be loaded by on-chip boot rom */ +#define APP_ENTRY 0x00001000 + +/* + * Stringize definitions - needed for environmental settings + */ +#define STRINGIZE2(x) #x +#define STRINGIZE(x) STRINGIZE2(x) + +/* + * Board settings + */ +#define CONFIG_DRIVER_SMC91111 1 +#define CONFIG_SMC91111_BASE 0x20300300 + +/* FLASH/ETHERNET uses the same address range */ +#define SHARED_RESOURCES 1 + +/* Is I2C bit-banged? */ +#define CONFIG_SOFT_I2C 1 + +/* + * Software (bit-bang) I2C driver configuration + */ +#define PF_SCL PF3 +#define PF_SDA PF2 + +/* + * Video splash screen support + */ +#define CONFIG_VIDEO 0 + +#define CONFIG_VDSP 1 + +/* + * Clock settings + */ + +/* CONFIG_CLKIN_HZ is any value in Hz */ +#define CONFIG_CLKIN_HZ 11059200 +/* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN */ +/* 1=CLKIN/2 */ +#define CONFIG_CLKIN_HALF 0 +/* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass */ +/* 1=bypass PLL */ +#define CONFIG_PLL_BYPASS 0 +/* CONFIG_VCO_MULT controls what the multiplier of the PLL is. */ +/* Values can range from 1-64 */ +#define CONFIG_VCO_MULT 36 +/* CONFIG_CCLK_DIV controls what the core clock divider is */ +/* Values can be 1, 2, 4, or 8 ONLY */ +#define CONFIG_CCLK_DIV 1 +/* CONFIG_SCLK_DIV controls what the peripheral clock divider is*/ +/* Values can range from 1-15 */ +#define CONFIG_SCLK_DIV 5 +/* CONFIG_SPI_BAUD controls the SPI peripheral clock divider */ +/* Values can range from 2-65535 */ +/* SCK Frequency = SCLK / (2 * CONFIG_SPI_BAUD) */ +#define CONFIG_SPI_BAUD 2 + +#if (BFIN_BOOT_MODE == BF533_SPI_BOOT) +#define CONFIG_SPI_BAUD_INITBLOCK 4 +#endif + +/* + * Network settings + */ + +#if (CONFIG_DRIVER_SMC91111) +#if 0 +#define CONFIG_MII +#endif + +/* network support */ +#define CONFIG_IPADDR 192.168.0.15 +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_GATEWAYIP 192.168.0.1 +#define CONFIG_SERVERIP 192.168.0.2 +#define CONFIG_HOSTNAME STAMP +#define CONFIG_ROOTPATH /checkout/uClinux-dist/romfs + +/* To remove hardcoding and enable MAC storage in EEPROM */ +/* #define CONFIG_ETHADDR 02:80:ad:20:31:b8 */ +#endif /* CONFIG_DRIVER_SMC91111 */ + +/* + * Flash settings + */ + +#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ +#define CFG_FLASH_CFI_AMD_RESET + +#define CFG_FLASH_BASE 0x20000000 +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 67 /* max number of sectors on one chip */ + +#if (BFIN_BOOT_MODE == BF533_BYPASS_BOOT) +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR 0x20004000 +#define CFG_ENV_OFFSET (CFG_ENV_ADDR - CFG_FLASH_BASE) +#elif (BFIN_BOOT_MODE == BF533_SPI_BOOT) +#define CFG_ENV_IS_IN_EEPROM 1 +#define CFG_ENV_OFFSET 0x4000 +#define CFG_ENV_HEADER (CFG_ENV_OFFSET + 0x12A) /* 0x12A is the length of LDR file header */ +#endif + +#define CFG_ENV_SIZE 0x2000 +#define CFG_ENV_SECT_SIZE 0x2000 /* Total Size of Environment Sector */ +#define ENV_IS_EMBEDDED + +#define CFG_FLASH_ERASE_TOUT 30000 /* Timeout for Chip Erase (in ms) */ +#define CFG_FLASH_ERASEBLOCK_TOUT 5000 /* Timeout for Block Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 1 /* Timeout for Flash Write (in ms) */ + +/* JFFS Partition offset set */ +#define CFG_JFFS2_FIRST_BANK 0 +#define CFG_JFFS2_NUM_BANKS 1 +/* 512k reserved for u-boot */ +#define CFG_JFFS2_FIRST_SECTOR 11 + +/* + * following timeouts shall be used once the + * Flash real protection is enabled + */ +#define CFG_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */ +#define CFG_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */ + +/* + * SDRAM settings & memory map + */ + +#define CONFIG_MEM_SIZE 128 /* 128, 64, 32, 16 */ +#define CONFIG_MEM_ADD_WDTH 11 /* 8, 9, 10, 11 */ +#define CONFIG_MEM_MT48LC64M4A2FB_7E 1 + +#if (BFIN_BOOT_MODE == BF533_BYPASS_BOOT) +#define CFG_MEMTEST_START 0x00000000 /* memtest works on */ +#elif (BFIN_BOOT_MODE == BF533_SPI_BOOT) +#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +#endif + +#define CFG_SDRAM_BASE 0x00000000 + +#define CFG_MAX_RAM_SIZE (CONFIG_MEM_SIZE * 1024 *1024) +#define CFG_MEMTEST_END (CFG_MAX_RAM_SIZE - 0x80000 - 1) +#define CONFIG_LOADADDR 0x01000000 + +#define CFG_LOAD_ADDR CONFIG_LOADADDR +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CFG_GBL_DATA_SIZE 0x4000 /* Reserve 16k for Global Data */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ + +#define CFG_MONITOR_BASE (CFG_MAX_RAM_SIZE - 0x40000) +#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) +#define CFG_GBL_DATA_ADDR (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE) +#define CONFIG_STACKBASE (CFG_GBL_DATA_ADDR - 4) + +/* Check to make sure everything fits in SDRAM */ +#if ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) > CFG_MAX_RAM_SIZE) + #error Memory Map does not fit into configuration +#endif + +#if ( CONFIG_CLKIN_HALF == 0 ) +#define CONFIG_VCO_HZ ( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) +#else +#define CONFIG_VCO_HZ (( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) / 2 ) +#endif + +#if (CONFIG_PLL_BYPASS == 0) +#define CONFIG_CCLK_HZ ( CONFIG_VCO_HZ / CONFIG_CCLK_DIV ) +#define CONFIG_SCLK_HZ ( CONFIG_VCO_HZ / CONFIG_SCLK_DIV ) +#else +#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ +#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ +#endif + +#if (BFIN_BOOT_MODE == BF533_SPI_BOOT) +#if (CONFIG_SCLK_HZ / (2*CONFIG_SPI_BAUD) > 20000000) +#define CONFIG_SPI_FLASH_FAST_READ 1 /* Needed if SPI_CLK > 20 MHz */ +#else +#undef CONFIG_SPI_FLASH_FAST_READ +#endif +#endif + +/* + * Command settings + */ + +#define CFG_LONGHELP 1 +#define CONFIG_CMDLINE_EDITING 1 + +#if (BFIN_BOOT_MODE == BF533_BYPASS_BOOT) +#define CFG_AUTOLOAD "no" /*rarpb, bootp or dhcp commands will perform only a */ +#endif + +/* configuration lookup from the BOOTP/DHCP server, */ +/* but not try to load any image using TFTP */ + +#define CONFIG_BOOTDELAY 5 +#define CONFIG_BOOT_RETRY_TIME -1 /* Enable this if bootretry required, currently its disabled */ +#if (BFIN_BOOT_MODE == BF533_BYPASS_BOOT) +#define CONFIG_BOOTCOMMAND "run ramboot" +#elif (BFIN_BOOT_MODE == BF533_SPI_BOOT) +#define CONFIG_BOOTCOMMAND "eeprom read 0x1000000 0x100000 0x180000;icache on;dcache on;bootm 0x1000000" +#endif + +#define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw console=ttyBF0,57600" + +#if (CONFIG_DRIVER_SMC91111) +#define CONFIG_COMMANDS1 (CONFIG_CMD_DFL | \ + CFG_CMD_PING | \ + CFG_CMD_ELF | \ + CFG_CMD_CACHE | \ + CFG_CMD_JFFS2 | \ + CFG_CMD_EEPROM | \ + CFG_CMD_DATE) + +#else +#define CONFIG_COMMANDS1 (CONFIG_CMD_DFL | \ + CFG_CMD_ELF | \ + CFG_CMD_CACHE | \ + CFG_CMD_JFFS2 | \ + CFG_CMD_EEPROM | \ + CFG_CMD_DATE) +#endif + +#if (BFIN_BOOT_MODE == BF533_BYPASS_BOOT) +#if (CONFIG_DRIVER_SMC91111) +#define CONFIG_EXTRA_ENV_SETTINGS \ + "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):" \ + "$(rootpath) console=ttyBF0,57600\0" \ + "addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):" \ + "$(gatewayip):$(netmask):$(hostname):eth0:off\0" \ + "ramboot=tftpboot $(loadaddr) linux; " \ + "run ramargs;run addip;bootelf\0" \ + "nfsboot=tftpboot $(loadaddr) linux; " \ + "run nfsargs;run addip;bootelf\0" \ + "flashboot=bootm 0x20100000\0" \ + "update=tftpboot $(loadaddr) u-boot.bin; " \ + "protect off 0x20000000 0x2003FFFF; erase 0x20000000 0x2003FFFF;" \ + "cp.b $(loadaddr) 0x20000000 $(filesize)\0" \ + "" +#else +#define CONFIG_EXTRA_ENV_SETTINGS \ + "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ + "flashboot=bootm 0x20100000\0" \ + " +#endif + +#elif (BFIN_BOOT_MODE == BF533_SPI_BOOT) +#define CONFIG_EXTRA_ENV_SETTINGS \ + "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):" \ + "$(rootpath) console=ttyBF0,57600\0" \ + "addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):" \ + "$(gatewayip):$(netmask):$(hostname):eth0:off\0" \ + "ramboot=tftpboot $(loadaddr) linux; " \ + "run ramargs;run addip;bootelf\0" \ + "nfsboot=tftpboot $(loadaddr) linux; " \ + "run nfsargs;run addip;bootelf\0" \ + "flashboot=bootm 0x20100000\0" \ + "update=tftpboot $(loadaddr) u-boot.ldr;" \ + "eeprom write $(loadaddr) 0x0 $(filesize);\0"\ + "" +#endif + +#ifdef CONFIG_SOFT_I2C +#if (!CONFIG_SOFT_I2C) +#undef CONFIG_SOFT_I2C +#endif +#endif + +#if (CONFIG_SOFT_I2C) +#define CONFIG_COMMANDS2 CFG_CMD_I2C +#else +#define CONFIG_COMMANDS2 0 +#endif /* CONFIG_SOFT_I2C */ + +#if (BFIN_BOOT_MODE == BF533_BYPASS_BOOT) +#define CONFIG_COMMANDS ( CONFIG_COMMANDS1 | CONFIG_COMMANDS2 | CFG_CMD_DHCP) +#elif (BFIN_BOOT_MODE == BF533_SPI_BOOT) +#define CONFIG_COMMANDS ( CONFIG_COMMANDS1 | CONFIG_COMMANDS2) +#endif + +/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +/* + * Console settings + */ + +#define CONFIG_BAUDRATE 57600 +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +#if (BFIN_BOOT_MODE == BF533_SPI_BOOT) +#if (BFIN_CPU == ADSP_BF531) +#define CFG_PROMPT "serial_bf531> " /* Monitor Command Prompt */ +#elif (BFIN_CPU == ADSP_BF532) +#define CFG_PROMPT "serial_bf532> " /* Monitor Command Prompt */ +#else +#define CFG_PROMPT "serial_bf533> " /* Monitor Command Prompt */ +#endif +#else +#if (BFIN_CPU == ADSP_BF531) +#define CFG_PROMPT "bf531> " /* Monitor Command Prompt */ +#elif (BFIN_CPU == ADSP_BF532) +#define CFG_PROMPT "bf532> " /* Monitor Command Prompt */ +#else +#define CFG_PROMPT "bf533> " /* Monitor Command Prompt */ +#endif +#endif + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CONFIG_LOADS_ECHO 1 + +/* + * I2C settings + * By default PF2 is used as SDA and PF3 as SCL on the Stamp board + */ +#if (CONFIG_SOFT_I2C) + +#define I2C_INIT (*pFIO_DIR |= PF_SCL); asm("ssync;") +#define I2C_ACTIVE (*pFIO_DIR |= PF_SDA); *pFIO_INEN &= ~PF_SDA; asm("ssync;") +#define I2C_TRISTATE (*pFIO_DIR &= ~PF_SDA); *pFIO_INEN |= PF_SDA; asm("ssync;") +#define I2C_READ ((volatile)(*pFIO_FLAG_D & PF_SDA) != 0); asm("ssync;") +#define I2C_SDA(bit) if(bit) { \ + *pFIO_FLAG_S = PF_SDA; \ + asm("ssync;"); \ + } \ + else { \ + *pFIO_FLAG_C = PF_SDA; \ + asm("ssync;"); \ + } +#define I2C_SCL(bit) if(bit) { \ + *pFIO_FLAG_S = PF_SCL; \ + asm("ssync;"); \ + } \ + else { \ + *pFIO_FLAG_C = PF_SCL; \ + asm("ssync;"); \ + } +#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ + +#define CFG_I2C_SPEED 50000 +#define CFG_I2C_SLAVE 0xFE +#endif /* CONFIG_SOFT_I2C */ + +/* + * Compact Flash settings + */ + +/* Enabled below option for CF support */ +/* #define CONFIG_STAMP_CF 1 */ + +#if defined(CONFIG_STAMP_CF) && (CONFIG_COMMANDS & CFG_CMD_IDE) + +#define CONFIG_MISC_INIT_R 1 +#define CONFIG_DOS_PARTITION 1 +/* + * IDE/ATA stuff + */ +#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */ +#undef CONFIG_IDE_LED /* no led for ide supported */ +#undef CONFIG_IDE_RESET /* no reset for ide supported */ + +#define CFG_IDE_MAXBUS 1 /* max. 1 IDE busses */ +#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */ + +#define CFG_ATA_BASE_ADDR 0x20200000 +#define CFG_ATA_IDE0_OFFSET 0x0000 + +#define CFG_ATA_DATA_OFFSET 0x0020 /* Offset for data I/O */ +#define CFG_ATA_REG_OFFSET 0x0020 /* Offset for normal register accesses */ +#define CFG_ATA_ALT_OFFSET 0x0007 /* Offset for alternate registers */ + +#define CFG_ATA_STRIDE 2 +#endif + +/* + * Miscellaneous configurable options + */ + +#define CFG_HZ 1000 /* 1ms time tick */ + +#define CFG_BOOTM_LEN 0x4000000/* Large Image Length, set to 64 Meg */ + +#define CONFIG_SHOW_BOOT_PROGRESS 1 /* Show boot progress on LEDs */ + +#define CONFIG_SPI + +#ifdef CONFIG_VIDEO +#if (CONFIG_VIDEO) +#define CONFIG_SPLASH_SCREEN 1 +#define CONFIG_SILENT_CONSOLE 1 +#else +#undef CONFIG_VIDEO +#endif +#endif + +/* + * FLASH organization and environment definitions + */ +#define CFG_BOOTMAPSZ (8 << 20)/* Initial Memory map for Linux */ + +/* 0xFF, 0xBBC3BBc3, 0x99B39983 */ +/*#define AMGCTLVAL (AMBEN_P0 | AMBEN_P1 | AMBEN_P2 | AMCKEN) +#define AMBCTL0VAL (B1WAT_11 | B1RAT_11 | B1HT_3 | B1ST_4 | B1TT_4 | B1RDYPOL | \ + B1RDYEN | B0WAT_11 | B0RAT_11 | B0HT_3 | B0ST_4 | B0TT_4 | B0RDYPOL | B0RDYEN) +#define AMBCTL1VAL (B3WAT_9 | B3RAT_9 | B3HT_2 | B3ST_3 | B3TT_4 | B3RDYPOL | \ + B3RDYEN | B2WAT_9 | B2RAT_9 | B2HT_2 | B2ST_4 | B2TT_4 | B2RDYPOL | B2RDYEN) +*/ +#define AMGCTLVAL 0xFF +#define AMBCTL0VAL 0xBBC3BBC3 +#define AMBCTL1VAL 0x99B39983 +#define CF_AMBCTL1VAL 0x99B3ffc2 + +#ifdef CONFIG_VDSP +#define ET_EXEC_VDSP 0x8 +#define SHT_STRTAB_VDSP 0x1 +#define ELFSHDRSIZE_VDSP 0x2C +#define VDSP_ENTRY_ADDR 0xFFA00000 +#endif + +#endif diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h new file mode 100644 index 0000000..f6755ac --- /dev/null +++ b/include/configs/bf537-stamp.h @@ -0,0 +1,502 @@ +/* + * U-boot - Configuration file for BF537 STAMP board + */ + +#ifndef __CONFIG_BF537_H__ +#define __CONFIG_BF537_H__ + +#define CFG_LONGHELP 1 +#define CONFIG_CMDLINE_EDITING 1 +#define CONFIG_BAUDRATE 57600 +/* Set default serial console for bf537 */ +#define CONFIG_UART_CONSOLE 0 +#define CONFIG_BF537 1 +#define CONFIG_BOOTDELAY 5 +/* define CONFIG_BF537_STAMP_LEDCMD to enable LED command*/ +/*#define CONFIG_BF537_STAMP_LEDCMD 1*/ + +/* + * Boot Mode Set + * Blackfin can support several boot modes + */ +#define BF537_BYPASS_BOOT 0x0011 /* Bootmode 0: Execute from 16-bit externeal memory ( bypass BOOT ROM) */ +#define BF537_PARA_BOOT 0x0012 /* Bootmode 1: Boot from 8-bit or 16-bit flash */ +#define BF537_SPI_MASTER_BOOT 0x0014 /* Bootmode 3: SPI master mode boot from SPI flash */ +#define BF537_SPI_SLAVE_BOOT 0x0015 /* Bootmode 4: SPI slave mode boot from SPI flash */ +#define BF537_TWI_MASTER_BOOT 0x0016 /* Bootmode 5: TWI master mode boot from EEPROM */ +#define BF537_TWI_SLAVE_BOOT 0x0017 /* Bootmode 6: TWI slave mode boot from EEPROM */ +#define BF537_UART_BOOT 0x0018 /* Bootmode 7: UART slave mdoe boot via UART host */ +/* Define the boot mode */ +#define BFIN_BOOT_MODE BF537_BYPASS_BOOT + +#define CONFIG_PANIC_HANG 1 + +#define ADSP_BF534 0x34 +#define ADSP_BF536 0x36 +#define ADSP_BF537 0x37 +#define BFIN_CPU ADSP_BF537 + +/* This sets the default state of the cache on U-Boot's boot */ +#define CONFIG_ICACHE_ON +#define CONFIG_DCACHE_ON + +/* Define if want to do post memory test */ +#undef CONFIG_POST_TEST + +/* Define where the uboot will be loaded by on-chip boot rom */ +#define APP_ENTRY 0x00001000 + +#define CONFIG_RTC_BFIN 1 +#define CONFIG_BOOT_RETRY_TIME -1 /* Enable this if bootretry required, currently its disabled */ + +/* CONFIG_CLKIN_HZ is any value in Hz */ +#define CONFIG_CLKIN_HZ 25000000 +/* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN */ +/* 1=CLKIN/2 */ +#define CONFIG_CLKIN_HALF 0 +/* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass */ +/* 1=bypass PLL*/ +#define CONFIG_PLL_BYPASS 0 +/* CONFIG_VCO_MULT controls what the multiplier of the PLL is. */ +/* Values can range from 1-64 */ +#define CONFIG_VCO_MULT 20 +/* CONFIG_CCLK_DIV controls what the core clock divider is */ +/* Values can be 1, 2, 4, or 8 ONLY */ +#define CONFIG_CCLK_DIV 1 +/* CONFIG_SCLK_DIV controls what the peripheral clock divider is*/ +/* Values can range from 1-15 */ +#define CONFIG_SCLK_DIV 5 +/* CONFIG_SPI_BAUD controls the SPI peripheral clock divider */ +/* Values can range from 2-65535 */ +/* SCK Frequency = SCLK / (2 * CONFIG_SPI_BAUD) */ +#define CONFIG_SPI_BAUD 2 +#if (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT) +#define CONFIG_SPI_BAUD_INITBLOCK 4 +#endif + +#if ( CONFIG_CLKIN_HALF == 0 ) +#define CONFIG_VCO_HZ ( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) +#else +#define CONFIG_VCO_HZ (( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) / 2 ) +#endif + +#if (CONFIG_PLL_BYPASS == 0) +#define CONFIG_CCLK_HZ ( CONFIG_VCO_HZ / CONFIG_CCLK_DIV ) +#define CONFIG_SCLK_HZ ( CONFIG_VCO_HZ / CONFIG_SCLK_DIV ) +#else +#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ +#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ +#endif + +#if (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT) +#if (CONFIG_SCLK_HZ / (2*CONFIG_SPI_BAUD) > 20000000) +#define CONFIG_SPI_FLASH_FAST_READ 1 /* Needed if SPI_CLK > 20 MHz */ +#else +#undef CONFIG_SPI_FLASH_FAST_READ +#endif +#endif + +#define CONFIG_MEM_SIZE 64 /* 128, 64, 32, 16 */ +#define CONFIG_MEM_ADD_WDTH 10 /* 8, 9, 10, 11 */ +#define CONFIG_MEM_MT48LC32M8A2_75 1 + +#define CONFIG_LOADS_ECHO 1 + +/* + * rarpb, bootp or dhcp commands will perform only a + * configuration lookup from the BOOTP/DHCP server + * but not try to load any image using TFTP + */ +#define CFG_AUTOLOAD "no" + +/* + * Network Settings + */ +/* network support */ +#if (BFIN_CPU != ADSP_BF534) +#define CONFIG_IPADDR 192.168.0.15 +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_GATEWAYIP 192.168.0.1 +#define CONFIG_SERVERIP 192.168.0.2 +#define CONFIG_HOSTNAME BF537 +#endif + +#define CONFIG_ROOTPATH /romfs +/* Uncomment next line to use fixed MAC address */ +/* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ +/* This is the routine that copies the MAC in Flash to the 'ethaddr' setting */ + +#define CFG_LONGHELP 1 +#define CONFIG_BOOTDELAY 5 +#define CONFIG_BOOT_RETRY_TIME -1 /* Enable this if bootretry required, currently its disabled */ +#define CONFIG_BOOTCOMMAND "run ramboot" + +#if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT) && defined(CONFIG_POST_TEST) +/* POST support */ +#define CONFIG_POST ( CFG_POST_MEMORY | \ + CFG_POST_UART | \ + CFG_POST_FLASH | \ + CFG_POST_ETHER | \ + CFG_POST_LED | \ + CFG_POST_BUTTON) +#else +#undef CONFIG_POST +#endif + +#ifdef CONFIG_POST +#define CFG_CMD_POST_DIAG CFG_CMD_DIAG +#define FLASH_START_POST_BLOCK 11 /* Should > = 11 */ +#define FLASH_END_POST_BLOCK 71 /* Should < = 71 */ +#else +#define CFG_CMD_POST_DIAG 0 +#endif + +/* CF-CARD IDE-HDD Support */ + +/* #define CONFIG_BFIN_TRUE_IDE */ /* Add CF flash card support */ +/* #define CONFIG_BFIN_CF_IDE */ /* Add CF flash card support */ +/* #define CONFIG_BFIN_HDD_IDE */ /* Add IDE Disk Drive (HDD) support */ + +#if defined(CONFIG_BFIN_CF_IDE) || defined(CONFIG_BFIN_HDD_IDE) || defined(CONFIG_BFIN_TRUE_IDE) +# define CONFIG_BFIN_IDE 1 +# define ADD_IDE_CMD CFG_CMD_IDE +#else +# define ADD_IDE_CMD 0 +#endif + +/*#define CONFIG_BF537_NAND */ /* Add nand flash support */ + +#ifdef CONFIG_BF537_NAND +# define ADD_NAND_CMD CFG_CMD_NAND +#else +# define ADD_NAND_CMD 0 +#endif + +#define CONFIG_NETCONSOLE 1 +#define CONFIG_NET_MULTI 1 + +#if (BFIN_CPU == ADSP_BF534) +#define CONFIG_BFIN_CMD (CONFIG_CMD_DFL & ~CFG_CMD_NET) +#else +#define CONFIG_BFIN_CMD (CONFIG_CMD_DFL | CFG_CMD_PING) +#endif + +#if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT) +#define CONFIG_COMMANDS (CONFIG_BFIN_CMD| \ + CFG_CMD_ELF | \ + CFG_CMD_I2C | \ + CFG_CMD_CACHE | \ + CFG_CMD_JFFS2 | \ + CFG_CMD_EEPROM | \ + CFG_CMD_DHCP | \ + ADD_IDE_CMD | \ + ADD_NAND_CMD | \ + CFG_CMD_POST_DIAG | \ + CFG_CMD_DATE) +#elif (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT) +#define CONFIG_COMMANDS (CONFIG_BFIN_CMD| \ + CFG_CMD_ELF | \ + CFG_CMD_I2C | \ + CFG_CMD_CACHE | \ + CFG_CMD_JFFS2 | \ + CFG_CMD_EEPROM | \ + ADD_IDE_CMD | \ + CFG_CMD_DATE) +#endif + +#define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw console=ttyBF0,57600" +#define CONFIG_LOADADDR 0x1000000 + +#if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT) +#if (BFIN_CPU != ADSP_BF534) +#define CONFIG_EXTRA_ENV_SETTINGS \ + "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$(serverip):$(rootpath) console=ttyBF0,57600\0"\ + "addip=setenv bootargs $(bootargs) " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \ + ":$(hostname):eth0:off\0" \ + "ramboot=tftpboot $(loadaddr) linux;" \ + "run ramargs;run addip;bootelf\0" \ + "nfsboot=tftpboot $(loadaddr) linux;" \ + "run nfsargs;run addip;bootelf\0" \ + "flashboot=bootm 0x20100000\0" \ + "update=tftpboot $(loadaddr) u-boot.bin;" \ + "protect off 0x20000000 0x2007FFFF;" \ + "erase 0x20000000 0x2007FFFF;cp.b 0x1000000 0x20000000 $(filesize)\0" \ + "" +#else +#define CONFIG_EXTRA_ENV_SETTINGS \ + "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ + "flashboot=bootm 0x20100000\0" \ + "" +#endif +#elif (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT) +#if (BFIN_CPU != ADSP_BF534) +#define CONFIG_EXTRA_ENV_SETTINGS \ + "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$(serverip):$(rootpath) console=ttyBF0,57600\0"\ + "addip=setenv bootargs $(bootargs) " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \ + ":$(hostname):eth0:off\0" \ + "ramboot=tftpboot $(loadaddr) linux;" \ + "run ramargs;run addip;bootelf\0" \ + "nfsboot=tftpboot $(loadaddr) linux;" \ + "run nfsargs;run addip;bootelf\0" \ + "flashboot=bootm 0x20100000\0" \ + "update=tftpboot $(loadaddr) u-boot.ldr;" \ + "eeprom write $(loadaddr) 0x0 $(filesize);\0" \ + "" +#else +#define CONFIG_EXTRA_ENV_SETTINGS \ + "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ + "flashboot=bootm 0x20100000\0" \ + "" +#endif +#endif + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#if (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT) +#if (BFIN_CPU == ADSP_BF534) +#define CFG_PROMPT "serial_bf534> " /* Monitor Command Prompt */ +#elif (BFIN_CPU == ADSP_BF536) +#define CFG_PROMPT "serial_bf536> " /* Monitor Command Prompt */ +#else +#define CFG_PROMPT "serial_bf537> " /* Monitor Command Prompt */ +#endif +#else +#if (BFIN_CPU == ADSP_BF534) +#define CFG_PROMPT "bf534> " /* Monitor Command Prompt */ +#elif (BFIN_CPU == ADSP_BF536) +#define CFG_PROMPT "bf536> " /* Monitor Command Prompt */ +#else +#define CFG_PROMPT "bf537> " /* Monitor Command Prompt */ +#endif +#endif + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_MAX_RAM_SIZE (CONFIG_MEM_SIZE * 1024*1024) +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CFG_MEMTEST_START 0x0 /* memtest works on */ +#define CFG_MEMTEST_END ( (CONFIG_MEM_SIZE - 1) * 1024*1024) /* 1 ... 63 MB in DRAM */ +#define CFG_LOAD_ADDR CONFIG_LOADADDR /* default load address */ +#define CFG_HZ 1000 /* decrementer freq: 10 ms ticks */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CFG_SDRAM_BASE 0x00000000 + +#define CFG_FLASH_BASE 0x20000000 + +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MONITOR_BASE (CFG_MAX_RAM_SIZE - CFG_MONITOR_LEN) +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) +#define CFG_GBL_DATA_SIZE 0x4000 +#define CFG_GBL_DATA_ADDR (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE) +#define CONFIG_STACKBASE (CFG_GBL_DATA_ADDR - 4) + +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */ + +#if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT) || (BFIN_BOOT_MODE == BF537_UART_BOOT) +/* for bf537-stamp, usrt boot mode still store env in flash */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_ADDR 0x20004000 +#define CFG_ENV_OFFSET (CFG_ENV_ADDR - CFG_FLASH_BASE) +#elif (BFIN_BOOT_MODE == BF537_SPI_MASTER_BOOT) +#define CFG_ENV_IS_IN_EEPROM 1 +#define CFG_ENV_OFFSET 0x4000 +#define CFG_ENV_HEADER (CFG_ENV_OFFSET + 0x16e) /* 0x12A is the length of LDR file header */ +#endif +#define CFG_ENV_SIZE 0x2000 +#define CFG_ENV_SECT_SIZE 0x2000 /* Total Size of Environment Sector */ +/* #if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT) */ +#define ENV_IS_EMBEDDED +/* #endif */ + +/* JFFS Partition offset set */ +#define CFG_JFFS2_FIRST_BANK 0 +#define CFG_JFFS2_NUM_BANKS 1 +/* 512k reserved for u-boot */ +#define CFG_JFFS2_FIRST_SECTOR 15 + +#define CONFIG_SPI + +/* + * Stack sizes + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ + +#define POLL_MODE 1 +#define FLASH_TOT_SECT 71 +#define FLASH_SIZE 0x400000 +#define CFG_FLASH_SIZE 0x400000 + +/* + * Board NAND Infomation + */ + +#define CFG_NAND_ADDR 0x20212000 +#define CFG_NAND_BASE CFG_NAND_ADDR +#define CFG_MAX_NAND_DEVICE 1 +#define SECTORSIZE 512 +#define ADDR_COLUMN 1 +#define ADDR_PAGE 2 +#define ADDR_COLUMN_PAGE 3 +#define NAND_ChipID_UNKNOWN 0x00 +#define NAND_MAX_FLOORS 1 +#define NAND_MAX_CHIPS 1 +#define BFIN_NAND_READY PF3 + +#define NAND_WAIT_READY(nand) \ + do { \ + int timeout = 0; \ + while(!(*pPORTFIO & PF3)) \ + if (timeout++ > 100000) \ + break; \ + } while (0) + +#define BFIN_NAND_CLE (1<<2) /* A2 -> Command Enable */ +#define BFIN_NAND_ALE (1<<1) /* A1 -> Address Enable */ + +#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | BFIN_NAND_CLE) = (__u8)(d); } while(0) +#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | BFIN_NAND_ALE) = (__u8)(d); } while(0) +#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0) +#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr)) + +/* + * Initialize PSD4256 registers for using I2C + */ +#define CONFIG_MISC_INIT_R + +#define CFG_BOOTM_LEN 0x4000000 /* Large Image Length, set to 64 Meg */ + +/* + * I2C settings + * By default PF1 is used as SDA and PF0 as SCL on the Stamp board + */ +/* #define CONFIG_SOFT_I2C 1*/ /* I2C bit-banged */ +#define CONFIG_HARD_I2C 1 /* I2C TWI */ +#if defined CONFIG_HARD_I2C +#define CONFIG_TWICLK_KHZ 50 +#endif + +#if defined CONFIG_SOFT_I2C +/* + * Software (bit-bang) I2C driver configuration + */ +#define PF_SCL PF0 +#define PF_SDA PF1 + +#define I2C_INIT (*pFIO_DIR |= PF_SCL); asm("ssync;") +#define I2C_ACTIVE (*pFIO_DIR |= PF_SDA); *pFIO_INEN &= ~PF_SDA; asm("ssync;") +#define I2C_TRISTATE (*pFIO_DIR &= ~PF_SDA); *pFIO_INEN |= PF_SDA; asm("ssync;") +#define I2C_READ ((volatile)(*pFIO_FLAG_D & PF_SDA) != 0); asm("ssync;") +#define I2C_SDA(bit) if(bit) { \ + *pFIO_FLAG_S = PF_SDA; \ + asm("ssync;"); \ + } \ + else { \ + *pFIO_FLAG_C = PF_SDA; \ + asm("ssync;"); \ + } +#define I2C_SCL(bit) if(bit) { \ + *pFIO_FLAG_S = PF_SCL; \ + asm("ssync;"); \ + } \ + else { \ + *pFIO_FLAG_C = PF_SCL; \ + asm("ssync;"); \ + } +#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ +#endif + +#define CFG_I2C_SPEED 50000 +#define CFG_I2C_SLAVE 0xFE + +/* 0xFF, 0x7BB07BB0, 0x22547BB0 */ +/* #define AMGCTLVAL (AMBEN_P0 | AMBEN_P1 | AMBEN_P2 | AMCKEN) +#define AMBCTL0VAL (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B1TT_4 | ~B1RDYPOL | \ + ~B1RDYEN | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3 | B0TT_4 | ~B0RDYPOL | ~B0RDYEN) +#define AMBCTL1VAL (B3WAT_2 | B3RAT_2 | B3HT_1 | B3ST_1 | B3TT_4 | B3RDYPOL | ~B3RDYEN | \ + B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3 | B2TT_4 | ~B2RDYPOL | ~B2RDYEN) +*/ + +#define AMGCTLVAL 0xFF +#define AMBCTL0VAL 0x7BB07BB0 +#define AMBCTL1VAL 0xFFC27BB0 + +#define CONFIG_VDSP 1 + +#ifdef CONFIG_VDSP +#define ET_EXEC_VDSP 0x8 +#define SHT_STRTAB_VDSP 0x1 +#define ELFSHDRSIZE_VDSP 0x2C +#define VDSP_ENTRY_ADDR 0xFFA00000 +#endif + +#if defined(CONFIG_BFIN_IDE) + +#define CONFIG_DOS_PARTITION 1 +/* + * IDE/ATA stuff + */ +#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */ +#undef CONFIG_IDE_LED /* no led for ide supported */ +#undef CONFIG_IDE_RESET /* no reset for ide supported */ + +#define CFG_IDE_MAXBUS 1 /* max. 1 IDE busses */ +#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */ + +#undef AMBCTL1VAL +#define AMBCTL1VAL 0xFFC3FFC3 + +#define CONFIG_CF_ATASEL_DIS 0x20311800 +#define CONFIG_CF_ATASEL_ENA 0x20311802 + +#if defined(CONFIG_BFIN_TRUE_IDE) +/* + * Note that these settings aren't for the most part used in include/ata.h + * when all of the ATA registers are setup + */ +#define CFG_ATA_BASE_ADDR 0x2031C000 +#define CFG_ATA_IDE0_OFFSET 0x0000 +#define CFG_ATA_DATA_OFFSET 0x0020 /* Offset for data I/O */ +#define CFG_ATA_REG_OFFSET 0x0020 /* Offset for normal register accesses */ +#define CFG_ATA_ALT_OFFSET 0x001C /* Offset for alternate registers */ +#define CFG_ATA_STRIDE 2 /* CF.A0 --> Blackfin.Ax */ +#endif /* CONFIG_BFIN_TRUE_IDE */ + +#if defined(CONFIG_BFIN_CF_IDE) /* USE CompactFlash Storage Card in the common memory space */ +#define CFG_ATA_BASE_ADDR 0x20211800 +#define CFG_ATA_IDE0_OFFSET 0x0000 +#define CFG_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */ +#define CFG_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses */ +#define CFG_ATA_ALT_OFFSET 0x000E /* Offset for alternate registers */ +#define CFG_ATA_STRIDE 1 /* CF.A0 --> Blackfin.Ax */ +#endif /* CONFIG_BFIN_CF_IDE */ + +#if defined(CONFIG_BFIN_HDD_IDE) /* USE TRUE IDE */ +#define CFG_ATA_BASE_ADDR 0x20314000 +#define CFG_ATA_IDE0_OFFSET 0x0000 +#define CFG_ATA_DATA_OFFSET 0x0020 /* Offset for data I/O */ +#define CFG_ATA_REG_OFFSET 0x0020 /* Offset for normal register accesses */ +#define CFG_ATA_ALT_OFFSET 0x001C /* Offset for alternate registers */ +#define CFG_ATA_STRIDE 2 /* CF.A0 --> Blackfin.A1 */ + +#undef CONFIG_SCLK_DIV +#define CONFIG_SCLK_DIV 8 +#endif /* CONFIG_BFIN_HDD_IDE */ + +#endif /*CONFIG_BFIN_IDE */ + +#endif diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h new file mode 100644 index 0000000..8d826fa --- /dev/null +++ b/include/configs/bf561-ezkit.h @@ -0,0 +1,244 @@ +/* + * U-boot - Configuration file for BF561 EZKIT board + */ + +#ifndef __CONFIG_EZKIT561_H__ +#define __CONFIG_EZKIT561_H__ + +#define CONFIG_VDSP 1 +#define CONFIG_BF561 1 + +#define CFG_LONGHELP 1 +#define CONFIG_CMDLINE_EDITING 1 +#define CONFIG_BAUDRATE 57600 +/* Set default serial console for bf537 */ +#define CONFIG_UART_CONSOLE 0 +#define CONFIG_EZKIT561 1 +#define CONFIG_BOOTDELAY 5 + +#define CONFIG_PANIC_HANG 1 + +/* +* Boot Mode Set +* Blackfin can support several boot modes +*/ +#define BF561_BYPASS_BOOT 0x21 +#define BF561_PARA_BOOT 0x22 +#define BF561_SPI_BOOT 0x24 +/* Define the boot mode */ +#define BFIN_BOOT_MODE BF561_BYPASS_BOOT + +/* This sets the default state of the cache on U-Boot's boot */ +#define CONFIG_ICACHE_ON +#define CONFIG_DCACHE_ON + +/* Define where the uboot will be loaded by on-chip boot rom */ +#define APP_ENTRY 0x00001000 + +/* + * Stringize definitions - needed for environmental settings + */ +#define STRINGIZE2(x) #x +#define STRINGIZE(x) STRINGIZE2(x) + +/* + * Board settings + */ +#define CONFIG_DRIVER_SMC91111 1 +#define CONFIG_SMC91111_BASE 0x2C010300 +#define CONFIG_ASYNC_EBIU_BASE CONFIG_SMC91111_BASE & ~(4*1024*1024) +#define CONFIG_SMC_USE_32_BIT 1 +#define CONFIG_MISC_INIT_R 1 + +/* + * Clock settings + */ + +/* CONFIG_CLKIN_HZ is any value in Hz */ +#define CONFIG_CLKIN_HZ 30000000 +/* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN */ +/* 1=CLKIN/2 */ +#define CONFIG_CLKIN_HALF 0 +/* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass */ +/* 1=bypass PLL */ +#define CONFIG_PLL_BYPASS 0 +/* CONFIG_VCO_MULT controls what the multiplier of the PLL is */ +/* Values can range from 1-64 */ +#define CONFIG_VCO_MULT 20 +/* CONFIG_CCLK_DIV controls what the core clock divider is */ +/* Values can be 1, 2, 4, or 8 ONLY */ +#define CONFIG_CCLK_DIV 1 +/* CONFIG_SCLK_DIV controls what the peripheral clock divider is */ +/* Values can range from 1-15 */ +#define CONFIG_SCLK_DIV 5 +/* CONFIG_SPI_BAUD controls the SPI peripheral clock divider */ +/* Values can range from 2-65535 */ +/* SCK Frequency = SCLK / (2 * CONFIG_SPI_BAUD) */ +#define CONFIG_SPI_BAUD 2 +#define CONFIG_SPI_BAUD_INITBLOCK 4 + +/* + * Network settings + */ +#if (CONFIG_DRIVER_SMC91111) +#define CONFIG_IPADDR 192.168.0.15 +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_GATEWAYIP 192.168.0.1 +#define CONFIG_SERVERIP 192.168.0.2 +#define CONFIG_HOSTNAME ezkit561 +#define CONFIG_ROOTPATH /arm-cross-build/BF561/uClinux-dist/romfs +#endif /* CONFIG_DRIVER_SMC91111 */ + +/* + * Flash settings + */ + +#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ +#define CFG_FLASH_CFI_AMD_RESET +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_FLASH_BASE 0x20000000 +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 135 /* max number of sectors on one chip */ +#define CFG_ENV_ADDR 0x20020000 +#define CFG_ENV_SECT_SIZE 0x10000 /* Total Size of Environment Sector */ +/* JFFS Partition offset set */ +#define CFG_JFFS2_FIRST_BANK 0 +#define CFG_JFFS2_NUM_BANKS 1 +/* 512k reserved for u-boot */ +#define CFG_JFFS2_FIRST_SECTOR 8 + +/* + * SDRAM settings & memory map + */ + +#define CONFIG_MEM_SIZE 64 /* 128, 64, 32, 16 */ +#define CONFIG_MEM_ADD_WDTH 9 /* 8, 9, 10, 11 */ +#define CONFIG_MEM_MT48LC16M16A2TG_75 1 + +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_MAX_RAM_SIZE (CONFIG_MEM_SIZE * 1024 * 1024) + +#define CFG_MEMTEST_START 0x0 /* memtest works on */ +#define CFG_MEMTEST_END ( (CONFIG_MEM_SIZE - 1) * 1024*1024) /* 1 ... 63 MB in DRAM */ + +#define CONFIG_LOADADDR 0x01000000 /* default load address */ +#define CFG_LOAD_ADDR CONFIG_LOADADDR +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MONITOR_BASE (CFG_MAX_RAM_SIZE - CFG_MONITOR_LEN) + +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) + +#define CFG_GBL_DATA_SIZE 0x4000 +#define CFG_GBL_DATA_ADDR (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE) +#define CONFIG_STACKBASE (CFG_GBL_DATA_ADDR - 4) +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ + +#if ( CONFIG_CLKIN_HALF == 0 ) +#define CONFIG_VCO_HZ ( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) +#else +#define CONFIG_VCO_HZ (( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) / 2 ) +#endif + +#if (CONFIG_PLL_BYPASS == 0) +#define CONFIG_CCLK_HZ ( CONFIG_VCO_HZ / CONFIG_CCLK_DIV ) +#define CONFIG_SCLK_HZ ( CONFIG_VCO_HZ / CONFIG_SCLK_DIV ) +#else +#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ +#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ +#endif + +/* + * Command settings + */ + +#define CFG_AUTOLOAD "no" /* rarpb, bootp, dhcp commands will */ + /* only perform a configuration */ + /* lookup from the BOOTP/DHCP server */ + /* but not try to load any image */ + /* using TFTP */ +#define CONFIG_BOOT_RETRY_TIME -1 /* Enable this if bootretry required, */ + /* currently its disabled */ +#define CONFIG_BOOTCOMMAND "run ramboot" +#define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw console=ttyBF0,57600" + +#if (CONFIG_DRIVER_SMC91111) +#define CONFIG_COMMANDS1 (CONFIG_CMD_DFL | \ + CFG_CMD_PING | \ + CFG_CMD_ELF | \ + CFG_CMD_CACHE | \ + CFG_CMD_JFFS2 | \ + CFG_CMD_DHCP) +#define CONFIG_EXTRA_ENV_SETTINGS \ + "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):" \ + "$(rootpath) console=ttyBF0,57600\0" \ + "addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):" \ + "$(gatewayip):$(netmask):$(hostname):eth0:off\0" \ + "ramboot=tftpboot $(loadaddr) linux; " \ + "run ramargs; run addip; bootelf\0" \ + "nfsboot=tftpboot $(loadaddr) linux; " \ + "run nfsargs; run addip; bootelf\0" \ + "update=tftpboot $(loadaddr) u-boot.bin; " \ + "protect off 0x20000000 0x2003FFFF; " \ + "erase 0x20000000 0x2003FFFF; " \ + "cp.b $(loadaddr) 0x20000000 $(filesize)\0" \ + "" +#else +#define CONFIG_COMMANDS1 (CONFIG_CMD_DFL | \ + CFG_CMD_ELF | \ + CFG_CMD_CACHE | \ + CFG_CMD_JFFS2) +#define CONFIG_EXTRA_ENV_SETTINGS \ + "ramargs=setenv bootargs root=/dev/mtdblock0 rw console=ttyBF0,57600\0" \ + "flashboot=bootm 0x20100000\0" \ + "" +#endif + +#define CONFIG_COMMANDS ( CONFIG_COMMANDS1 | CONFIG_COMMANDS2 ) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +/* + * Console settings + */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +#define CFG_PROMPT "ezkit> " /* Monitor Command Prompt */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CONFIG_LOADS_ECHO 1 + +/* + * Miscellaneous configurable options + */ +#define CFG_HZ 1000 /* decrementer freq: 10 ms ticks */ +#define CFG_BOOTM_LEN 0x4000000 /* Large Image Length, set to 64 Meg */ + +/* + * FLASH organization and environment definitions + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +#define AMGCTLVAL 0x3F +#define AMBCTL0VAL 0x7BB07BB0 +#define AMBCTL1VAL 0xFFC27BB0 + +#ifdef CONFIG_VDSP +#define ET_EXEC_VDSP 0x8 +#define SHT_STRTAB_VDSP 0x1 +#define ELFSHDRSIZE_VDSP 0x2C +#define VDSP_ENTRY_ADDR 0xFFA00000 +#endif + +#endif /* __CONFIG_EZKIT561_H__ */ diff --git a/include/configs/ezkit533.h b/include/configs/ezkit533.h deleted file mode 100644 index 5eda673..0000000 --- a/include/configs/ezkit533.h +++ /dev/null @@ -1,188 +0,0 @@ -#ifndef __CONFIG_EZKIT533_H__ -#define __CONFIG_EZKIT533_H__ - -#define CFG_LONGHELP 1 -#define CONFIG_BAUDRATE 57600 -#define CONFIG_STAMP 1 -#define CONFIG_BOOTDELAY 5 - -#define CONFIG_DRIVER_SMC91111 1 -#define CONFIG_SMC91111_BASE 0x20310300 -#if 0 -#define CONFIG_MII -#define CFG_DISCOVER_PHY -#endif - -#define CONFIG_RTC_BF533 1 -#define CONFIG_BOOT_RETRY_TIME -1 /* Enable this if bootretry required, currently its disabled */ - -/* CONFIG_CLKIN_HZ is any value in Hz */ -#define CONFIG_CLKIN_HZ 27000000 -/* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN */ -/* 1=CLKIN/2 */ -#define CONFIG_CLKIN_HALF 0 -/* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass */ -/* 1=bypass PLL */ -#define CONFIG_PLL_BYPASS 0 -/* CONFIG_VCO_MULT controls what the multiplier of the PLL is. */ -/* Values can range from 1-64 */ -#define CONFIG_VCO_MULT 22 -/* CONFIG_CCLK_DIV controls what the core clock divider is */ -/* Values can be 1, 2, 4, or 8 ONLY */ -#define CONFIG_CCLK_DIV 1 -/* CONFIG_SCLK_DIV controls what the peripheral clock divider is */ -/* Values can range from 1-15 */ -#define CONFIG_SCLK_DIV 5 - -#if ( CONFIG_CLKIN_HALF == 0 ) -#define CONFIG_VCO_HZ ( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) -#else -#define CONFIG_VCO_HZ (( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) / 2 ) -#endif - -#if (CONFIG_PLL_BYPASS == 0) -#define CONFIG_CCLK_HZ ( CONFIG_VCO_HZ / CONFIG_CCLK_DIV ) -#define CONFIG_SCLK_HZ ( CONFIG_VCO_HZ / CONFIG_SCLK_DIV ) -#else -#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ -#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ -#endif - -#define CONFIG_MEM_SIZE 32 /* 128, 64, 32, 16 */ -#define CONFIG_MEM_ADD_WDTH 9 /* 8, 9, 10, 11 */ -#define CONFIG_MEM_MT48LC16M16A2TG_75 1 - -#define CONFIG_LOADS_ECHO 1 - - -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_PING | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_DATE) -#define CONFIG_BOOTARGS "root=/dev/mtdblock0 ip=192.168.0.15:192.168.0.2:192.168.0.1:255.255.255.0:ezkit:eth0:off" - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - -#define CFG_PROMPT "ezkit> " /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ -#define CFG_MEMTEST_END 0x01F00000 /* 1 ... 31 MB in DRAM */ -#define CFG_LOAD_ADDR 0x01000000 /* default load address */ -#define CFG_HZ 1000 /* decrementer freq: 10 ms ticks */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -#define CFG_SDRAM_BASE 0x00000000 -#define CFG_MAX_RAM_SIZE 0x02000000 -#define CFG_FLASH_BASE 0x20000000 - -#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CFG_MONITOR_BASE (CFG_MAX_RAM_SIZE - CFG_MONITOR_LEN) -#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) -#define CFG_GBL_DATA_SIZE 0x4000 -#define CFG_GBL_DATA_ADDR (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE) -#define CONFIG_STACKBASE (CFG_GBL_DATA_ADDR - 4) - -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ -#define CFG_FLASH0_BASE 0x20000000 -#define CFG_FLASH1_BASE 0x20200000 -#define CFG_FLASH2_BASE 0x20280000 -#define CFG_MAX_FLASH_BANKS 3 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 40 /* max number of sectors on one chip */ - -#define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_ADDR 0x20020000 -#define CFG_ENV_SECT_SIZE 0x10000 /* Total Size of Environment Sector */ - -/* JFFS Partition offset set */ -#define CFG_JFFS2_FIRST_BANK 0 -#define CFG_JFFS2_NUM_BANKS 1 -/* 512k reserved for u-boot */ -#define CFG_JFFS2_FIRST_SECTOR 11 - - -/* - * Stack sizes - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ - -#define POLL_MODE 1 -#define FLASH_TOT_SECT 40 -#define FLASH_SIZE 0x220000 -#define CFG_FLASH_SIZE 0x220000 - -/* - * Initialize PSD4256 registers for using I2C - */ -#define CONFIG_MISC_INIT_R - -/* - * I2C settings - * By default PF1 is used as SDA and PF0 as SCL on the Stamp board - */ -#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */ -/* - * Software (bit-bang) I2C driver configuration - */ -#define PF_SCL PF0 -#define PF_SDA PF1 - -#define I2C_INIT (*pFIO_DIR |= PF_SCL); asm("ssync;") -#define I2C_ACTIVE (*pFIO_DIR |= PF_SDA); *pFIO_INEN &= ~PF_SDA; asm("ssync;") -#define I2C_TRISTATE (*pFIO_DIR &= ~PF_SDA); *pFIO_INEN |= PF_SDA; asm("ssync;") -#define I2C_READ ((volatile)(*pFIO_FLAG_D & PF_SDA) != 0); asm("ssync;") -#define I2C_SDA(bit) if(bit) { \ - *pFIO_FLAG_S = PF_SDA; \ - asm("ssync;"); \ - } \ - else { \ - *pFIO_FLAG_C = PF_SDA; \ - asm("ssync;"); \ - } -#define I2C_SCL(bit) if(bit) { \ - *pFIO_FLAG_S = PF_SCL; \ - asm("ssync;"); \ - } \ - else { \ - *pFIO_FLAG_C = PF_SCL; \ - asm("ssync;"); \ - } -#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ - -#define CFG_I2C_SPEED 50000 -#define CFG_I2C_SLAVE 0xFE - - -#define __ADSPLPBLACKFIN__ 1 -#define __ADSPBF533__ 1 - -/* 0xFF, 0x7BB07BB0, 0x22547BB0 */ -/* #define AMGCTLVAL (AMBEN_P0 | AMBEN_P1 | AMBEN_P2 | AMCKEN) -#define AMBCTL0VAL (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B1TT_4 | ~B1RDYPOL | \ - ~B1RDYEN | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3 | B0TT_4 | ~B0RDYPOL | ~B0RDYEN) -#define AMBCTL1VAL (B3WAT_2 | B3RAT_2 | B3HT_1 | B3ST_1 | B3TT_4 | B3RDYPOL | ~B3RDYEN | \ - B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3 | B2TT_4 | ~B2RDYPOL | ~B2RDYEN) -*/ -#define AMGCTLVAL 0xFF -#define AMBCTL0VAL 0x7BB07BB0 -#define AMBCTL1VAL 0xFFC27BB0 - -#define CONFIG_VDSP 1 - -#ifdef CONFIG_VDSP -#define ET_EXEC_VDSP 0x8 -#define SHT_STRTAB_VDSP 0x1 -#define ELFSHDRSIZE_VDSP 0x2C -#define VDSP_ENTRY_ADDR 0xFFA00000 -#endif - -#endif diff --git a/include/configs/stamp.h b/include/configs/stamp.h deleted file mode 100644 index 248ca70..0000000 --- a/include/configs/stamp.h +++ /dev/null @@ -1,333 +0,0 @@ -/* - * U-boot - stamp.h Configuration file for STAMP board - * having BF533 processor - * - * Copyright (c) 2005 blackfin.uclinux.org - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_STAMP_H__ -#define __CONFIG_STAMP_H__ - -/* - * Board settings - * - */ - -#define __ADSPLPBLACKFIN__ 1 -#define __ADSPBF533__ 1 -#define CONFIG_STAMP 1 -#define CONFIG_RTC_BF533 1 - -/* FLASH/ETHERNET uses the same address range */ -#define SHARED_RESOURCES 1 - -#define CONFIG_VDSP 1 - -/* - * Clock settings - * - */ - -/* CONFIG_CLKIN_HZ is any value in Hz */ -#define CONFIG_CLKIN_HZ 11059200 -/* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN */ -/* 1=CLKIN/2 */ -#define CONFIG_CLKIN_HALF 0 -/* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass */ -/* 1=bypass PLL */ -#define CONFIG_PLL_BYPASS 0 -/* CONFIG_VCO_MULT controls what the multiplier of the PLL is. */ -/* Values can range from 1-64 */ -#define CONFIG_VCO_MULT 45 -/* CONFIG_CCLK_DIV controls what the core clock divider is */ -/* Values can be 1, 2, 4, or 8 ONLY */ -#define CONFIG_CCLK_DIV 1 -/* CONFIG_SCLK_DIV controls what the peripheral clock divider is */ -/* Values can range from 1-15 */ -#define CONFIG_SCLK_DIV 6 - -/* - * Network Settings - */ -/* network support */ -#define CONFIG_IPADDR 192.168.0.15 -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_GATEWAYIP 192.168.0.1 -#define CONFIG_SERVERIP 192.168.0.2 -#define CONFIG_HOSTNAME STAMP -#define CONFIG_ROOTPATH /checkout/uClinux-dist/romfs - -/* To remove hardcoding and enable MAC storage in EEPROM */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:b8 */ - -/* - * Command settings - * - */ - -#define CFG_LONGHELP 1 - -#define CONFIG_BOOTDELAY 5 -#define CONFIG_BOOT_RETRY_TIME -1 /* Enable this if bootretry required, currently its disabled */ -#define CONFIG_BOOTCOMMAND "run ramboot" -#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n" - -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_PING | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_CACHE | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_DATE) -#define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "ramargs=setenv bootargs root=/dev/mtdblock0 rw\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$(serverip):$(rootpath)\0" \ - "addip=setenv bootargs $(bootargs) " \ - "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \ - ":$(hostname):eth0:off\0" \ - "ramboot=tftpboot 0x1000000 linux;" \ - "run ramargs;run addip;bootelf\0" \ - "nfsboot=tftpboot 0x1000000 linux;" \ - "run nfsargs;run addip;bootelf\0" \ - "flashboot=bootm 0x20100000\0" \ - "" - -/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - -/* - * Console settings - * - */ - -#define CONFIG_BAUDRATE 57600 -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -#define CFG_PROMPT "stamp>" /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_LOADS_ECHO 1 - -/* - * Network settings - * - */ - -#define CONFIG_DRIVER_SMC91111 1 -#define CONFIG_SMC91111_BASE 0x20300300 -/* To remove hardcoding and enable MAC storage in EEPROM */ -/* #define HARDCODE_MAC 1 */ - -/* - * Flash settings - * - */ - -#define CFG_FLASH_CFI /* The flash is CFI compatible */ -#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ -#define CFG_FLASH_CFI_AMD_RESET - -#define CFG_ENV_IS_IN_FLASH 1 - -#define CFG_FLASH_BASE 0x20000000 -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 67 /* max number of sectors on one chip */ - -#define CFG_ENV_ADDR 0x20020000 -#define CFG_ENV_SIZE 0x10000 -#define CFG_ENV_SECT_SIZE 0x10000 /* Total Size of Environment Sector */ - -#define CFG_FLASH_ERASE_TOUT 30000 /* Timeout for Chip Erase (in ms) */ -#define CFG_FLASH_ERASEBLOCK_TOUT 5000 /* Timeout for Block Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 1 /* Timeout for Flash Write (in ms) */ - -/* JFFS Partition offset set */ -#define CFG_JFFS2_FIRST_BANK 0 -#define CFG_JFFS2_NUM_BANKS 1 -/* 512k reserved for u-boot */ -#define CFG_JFFS2_FIRST_SECTOR 11 - -/* - * following timeouts shall be used once the - * Flash real protection is enabled - */ -#define CFG_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */ -#define CFG_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */ - -/* - * I2C settings - * By default PF2 is used as SDA and PF3 as SCL on the Stamp board - */ -#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */ -/* - * Software (bit-bang) I2C driver configuration - */ -#define PF_SCL PF3 -#define PF_SDA PF2 - -#define I2C_INIT (*pFIO_DIR |= PF_SCL); asm("ssync;") -#define I2C_ACTIVE (*pFIO_DIR |= PF_SDA); *pFIO_INEN &= ~PF_SDA; asm("ssync;") -#define I2C_TRISTATE (*pFIO_DIR &= ~PF_SDA); *pFIO_INEN |= PF_SDA; asm("ssync;") -#define I2C_READ ((volatile)(*pFIO_FLAG_D & PF_SDA) != 0); asm("ssync;") -#define I2C_SDA(bit) if(bit) { \ - *pFIO_FLAG_S = PF_SDA; \ - asm("ssync;"); \ - } \ - else { \ - *pFIO_FLAG_C = PF_SDA; \ - asm("ssync;"); \ - } -#define I2C_SCL(bit) if(bit) { \ - *pFIO_FLAG_S = PF_SCL; \ - asm("ssync;"); \ - } \ - else { \ - *pFIO_FLAG_C = PF_SCL; \ - asm("ssync;"); \ - } -#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ - -#define CFG_I2C_SPEED 50000 -#define CFG_I2C_SLAVE 0xFE - -/* - * Compact Flash settings - */ - -/* Enabled below option for CF support */ -/* #define CONFIG_STAMP_CF 1 */ - -#if defined(CONFIG_STAMP_CF) && (CONFIG_COMMANDS & CFG_CMD_IDE) - -#define CONFIG_MISC_INIT_R 1 -#define CONFIG_DOS_PARTITION 1 - -/* - * IDE/ATA stuff - */ -#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */ -#undef CONFIG_IDE_LED /* no led for ide supported */ -#undef CONFIG_IDE_RESET /* no reset for ide supported */ - -#define CFG_IDE_MAXBUS 1 /* max. 1 IDE busses */ -#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */ - -#define CFG_ATA_BASE_ADDR 0x20200000 -#define CFG_ATA_IDE0_OFFSET 0x0000 - -#define CFG_ATA_DATA_OFFSET 0x0020 /* Offset for data I/O */ -#define CFG_ATA_REG_OFFSET 0x0020 /* Offset for normal register accesses */ -#define CFG_ATA_ALT_OFFSET 0x0007 /* Offset for alternate registers */ - -#define CFG_ATA_STRIDE 2 -#endif - -/* - * SDRAM settings - * - */ - -#define CONFIG_MEM_SIZE 128 /* 128, 64, 32, 16 */ -#define CONFIG_MEM_ADD_WDTH 11 /* 8, 9, 10, 11 */ -#define CONFIG_MEM_MT48LC64M4A2FB_7E 1 - -#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ -#define CFG_MEMTEST_END 0x07EFFFFF /* 1 ... 127 MB in DRAM */ -#define CFG_LOAD_ADDR 0x01000000 /* default load address */ - -#define CFG_SDRAM_BASE 0x00000000 -#define CFG_MAX_RAM_SIZE 0x08000000 - -#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CFG_MONITOR_BASE (CFG_MAX_RAM_SIZE - CFG_MONITOR_LEN) - -#if ( CONFIG_CLKIN_HALF == 0 ) -#define CONFIG_VCO_HZ ( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) -#else -#define CONFIG_VCO_HZ (( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) / 2 ) -#endif - -#if (CONFIG_PLL_BYPASS == 0) -#define CONFIG_CCLK_HZ ( CONFIG_VCO_HZ / CONFIG_CCLK_DIV ) -#define CONFIG_SCLK_HZ ( CONFIG_VCO_HZ / CONFIG_SCLK_DIV ) -#else -#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ -#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ -#endif - -/* - * Miscellaneous configurable options - */ -#define CFG_HZ 1000 /* 1ms time tick */ - -#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) -#define CFG_GBL_DATA_SIZE 0x4000 -#define CFG_GBL_DATA_ADDR (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE) -#define CONFIG_STACKBASE (CFG_GBL_DATA_ADDR - 4) - -#define CFG_LARGE_IMAGE_LEN 0x4000000 /* Large Image Length, set to 64 Meg */ - -#define CONFIG_SHOW_BOOT_PROGRESS 1 /* Show boot progress on LEDs */ - -/* - * Stack sizes - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ - -/* - * FLASH organization and environment definitions - */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/* 0xFF, 0xBBC3BBc3, 0x99B39983 */ -/*#define AMGCTLVAL (AMBEN_P0 | AMBEN_P1 | AMBEN_P2 | AMCKEN) -#define AMBCTL0VAL (B1WAT_11 | B1RAT_11 | B1HT_3 | B1ST_4 | B1TT_4 | B1RDYPOL | \ - B1RDYEN | B0WAT_11 | B0RAT_11 | B0HT_3 | B0ST_4 | B0TT_4 | B0RDYPOL | B0RDYEN) -#define AMBCTL1VAL (B3WAT_9 | B3RAT_9 | B3HT_2 | B3ST_3 | B3TT_4 | B3RDYPOL | \ - B3RDYEN | B2WAT_9 | B2RAT_9 | B2HT_2 | B2ST_4 | B2TT_4 | B2RDYPOL | B2RDYEN) -*/ -#define AMGCTLVAL 0xFF -#define AMBCTL0VAL 0xBBC3BBC3 -#define AMBCTL1VAL 0x99B39983 -#define CF_AMBCTL1VAL 0x99B3ffc2 - -#ifdef CONFIG_VDSP -#define ET_EXEC_VDSP 0x8 -#define SHT_STRTAB_VDSP 0x1 -#define ELFSHDRSIZE_VDSP 0x2C -#define VDSP_ENTRY_ADDR 0xFFA00000 -#endif - -#endif diff --git a/include/flash.h b/include/flash.h index 55b6d8f..43b9c6b 100644 --- a/include/flash.h +++ b/include/flash.h @@ -252,6 +252,8 @@ extern void flash_read_factory_serial(flash_info_t * info, void * buffer, int of #define STM_ID_x800AB 0x005B005B /* M29W800AB ID (8M = 512K x 16 ) */ #define STM_ID_29W320DT 0x22CA22CA /* M29W320DT ID (32 M, top boot sector) */ #define STM_ID_29W320DB 0x22CB22CB /* M29W320DB ID (32 M, bottom boot sect) */ +#define STM_ID_29W320ET 0x22562256 /* M29W320ET ID (32 M, top boot sector) */ +#define STM_ID_29W320EB 0x22572257 /* M29W320EB ID (32 M, bottom boot sect)*/ #define STM_ID_29W040B 0x00E300E3 /* M29W040B ID (4M = 512K x 8) */ #define FLASH_PSD4256GV 0x00E9 /* PSD4256 Flash and CPLD combination */ diff --git a/include/linux/stat.h b/include/linux/stat.h index f9422cb..4d05aa9 100644 --- a/include/linux/stat.h +++ b/include/linux/stat.h @@ -67,7 +67,7 @@ struct stat { #endif /* __PPC__ */ -#if defined (__ARM__) || defined (__I386__) || defined (__M68K__) || defined (__blackfin__) +#if defined (__ARM__) || defined (__I386__) || defined (__M68K__) || defined (__bfin__) struct stat { unsigned short st_dev; diff --git a/lib_blackfin/Makefile b/lib_blackfin/Makefile index de7114b..ac78662 100644 --- a/lib_blackfin/Makefile +++ b/lib_blackfin/Makefile @@ -3,7 +3,7 @@ # # Copyright (c) 2005 blackfin.uclinux.org # -# (C) Copyright 2000-2006 +# (C) Copyright 2000-2004 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -29,9 +29,9 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(ARCH).a -SOBJS = +SOBJS = memcpy.o memcmp.o memset.o memmove.o -COBJS = board.o bf533_linux.o bf533_string.o cache.o muldi3.o +COBJS = post.o tests.o board.o bf533_linux.o bf533_string.o cache.o muldi3.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) diff --git a/lib_blackfin/bf533_linux.c b/lib_blackfin/bf533_linux.c index 88b4da2..1b0d90a 100644 --- a/lib_blackfin/bf533_linux.c +++ b/lib_blackfin/bf533_linux.c @@ -43,20 +43,21 @@ #define SHOW_BOOT_PROGRESS(arg) #endif -#define CMD_LINE_ADDR 0xFF900000 /* L1 scratchpad */ +#define CMD_LINE_ADDR 0xFF900000 /* L1 scratchpad */ #ifdef SHARED_RESOURCES - extern void swap_to(int device_id); +extern void swap_to(int device_id); #endif +extern image_header_t header; +extern void flush_instruction_cache(void); +extern void flush_data_cache(void); static char *make_command_line(void); -extern image_header_t header; -extern int do_reset(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]); void do_bootm_linux(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[], ulong addr, ulong * len_ptr, int verify) { - int (*appl)(char *cmdline); + int (*appl) (char *cmdline); char *cmdline; #ifdef SHARED_RESOURCES @@ -66,26 +67,26 @@ void do_bootm_linux(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[], appl = (int (*)(char *))ntohl(header.ih_ep); printf("Starting Kernel at = %x\n", appl); cmdline = make_command_line(); - if(icache_status()){ + if (icache_status()) { flush_instruction_cache(); icache_disable(); - } - if(dcache_status()){ + } + if (dcache_status()) { flush_data_cache(); dcache_disable(); - } - (*appl)(cmdline); + } + (*appl) (cmdline); } char *make_command_line(void) { - char *dest = (char *) CMD_LINE_ADDR; - char *bootargs; + char *dest = (char *)CMD_LINE_ADDR; + char *bootargs; - if ( (bootargs = getenv("bootargs")) == NULL ) - return NULL; + if ((bootargs = getenv("bootargs")) == NULL) + return NULL; - strncpy(dest, bootargs, 0x1000); - dest[0xfff] = 0; - return dest; + strncpy(dest, bootargs, 0x1000); + dest[0xfff] = 0; + return dest; } diff --git a/lib_blackfin/bf533_string.c b/lib_blackfin/bf533_string.c index c8b1a3a..85b1150 100644 --- a/lib_blackfin/bf533_string.c +++ b/lib_blackfin/bf533_string.c @@ -28,9 +28,15 @@ #include <common.h> #include <asm/setup.h> #include <asm/page.h> -#include <asm/cpu/defBF533.h> +#include <config.h> +#include <asm/blackfin.h> +#include <asm/io.h> -void *dma_memcpy(void *,const void *,size_t); +extern void blackfin_icache_flush_range(const void *, const void *); +extern void blackfin_dcache_flush_range(const void *, const void *); +extern void *memcpy_ASM(void *dest, const void *src, size_t count); + +void *dma_memcpy(void *, const void *, size_t); char *strcpy(char *dest, const char *src) { @@ -38,11 +44,11 @@ char *strcpy(char *dest, const char *src) char temp = 0; __asm__ __volatile__ - ("1:\t%2 = B [%1++] (Z);\n\t" - "B [%0++] = %2;\n\t" - "CC = %2;\n\t" - "if cc jump 1b (bp);\n":"=a"(dest), "=a"(src), "=d"(temp) - :"0"(dest), "1"(src), "2"(temp):"memory"); + ("1:\t%2 = B [%1++] (Z);\n\t" + "B [%0++] = %2;\n\t" + "CC = %2;\n\t" + "if cc jump 1b (bp);\n":"=a"(dest), "=a"(src), "=d"(temp) + :"0"(dest), "1"(src), "2"(temp):"memory"); return xdest; } @@ -56,16 +62,16 @@ char *strncpy(char *dest, const char *src, size_t n) return xdest; __asm__ __volatile__ - ("1:\t%3 = B [%1++] (Z);\n\t" - "B [%0++] = %3;\n\t" - "CC = %3;\n\t" - "if ! cc jump 2f;\n\t" - "%2 += -1;\n\t" - "CC = %2 == 0;\n\t" - "if ! cc jump 1b (bp);\n" - "2:\n":"=a"(dest), "=a"(src), "=da"(n), "=d"(temp) - :"0"(dest), "1"(src), "2"(n), "3"(temp) - :"memory"); + ("1:\t%3 = B [%1++] (Z);\n\t" + "B [%0++] = %3;\n\t" + "CC = %3;\n\t" + "if ! cc jump 2f;\n\t" + "%2 += -1;\n\t" + "CC = %2 == 0;\n\t" + "if ! cc jump 1b (bp);\n" + "2:\n":"=a"(dest), "=a"(src), "=da"(n), "=d"(temp) + :"0"(dest), "1"(src), "2"(n), "3"(temp) + :"memory"); return xdest; } @@ -74,18 +80,16 @@ int strcmp(const char *cs, const char *ct) { char __res1, __res2; - __asm__ - ("1:\t%2 = B[%0++] (Z);\n\t" /* get *cs */ - "%3 = B[%1++] (Z);\n\t" /* get *ct */ - "CC = %2 == %3;\n\t" /* compare a byte */ - "if ! cc jump 2f;\n\t" /* not equal, break out */ - "CC = %2;\n\t" /* at end of cs? */ + __asm__("1:\t%2 = B[%0++] (Z);\n\t" /* get *cs */ + "%3 = B[%1++] (Z);\n\t" /* get *ct */ + "CC = %2 == %3;\n\t" /* compare a byte */ + "if ! cc jump 2f;\n\t" /* not equal, break out */ + "CC = %2;\n\t" /* at end of cs? */ "if cc jump 1b (bp);\n\t" /* no, keep going */ - "jump.s 3f;\n" /* strings are equal */ - "2:\t%2 = %2 - %3;\n" /* *cs - *ct */ - "3:\n": "=a"(cs), "=a"(ct), "=d"(__res1), - "=d"(__res2) - : "0"(cs), "1"(ct)); + "jump.s 3f;\n" /* strings are equal */ + "2:\t%2 = %2 - %3;\n" /* *cs - *ct */ + "3:\n": "=a"(cs), "=a"(ct), "=d"(__res1), "=d"(__res2) + : "0"(cs), "1"(ct)); return __res1; } @@ -97,20 +101,19 @@ int strncmp(const char *cs, const char *ct, size_t count) if (!count) return 0; - __asm__ - ("1:\t%3 = B[%0++] (Z);\n\t" /* get *cs */ - "%4 = B[%1++] (Z);\n\t" /* get *ct */ - "CC = %3 == %4;\n\t" /* compare a byte */ - "if ! cc jump 3f;\n\t" /* not equal, break out */ - "CC = %3;\n\t" /* at end of cs? */ - "if ! cc jump 4f;\n\t" /* yes, all done */ - "%2 += -1;\n\t" /* no, adjust count */ + __asm__("1:\t%3 = B[%0++] (Z);\n\t" /* get *cs */ + "%4 = B[%1++] (Z);\n\t" /* get *ct */ + "CC = %3 == %4;\n\t" /* compare a byte */ + "if ! cc jump 3f;\n\t" /* not equal, break out */ + "CC = %3;\n\t" /* at end of cs? */ + "if ! cc jump 4f;\n\t" /* yes, all done */ + "%2 += -1;\n\t" /* no, adjust count */ "CC = %2 == 0;\n\t" "if ! cc jump 1b;\n" /* more to do, keep going */ - "2:\t%3 = 0;\n\t" /* strings are equal */ + "2:\t%3 = 0;\n\t" /* strings are equal */ "jump.s 4f;\n" "3:\t%3 = %3 - %4;\n" /* *cs - *ct */ - "4:": "=a"(cs), "=a"(ct), "=da"(count), "=d"(__res1), + "4:": "=a"(cs), "=a"(ct), "=da"(count), "=d"(__res1), "=d"(__res2) - : "0"(cs), "1"(ct), "2"(count)); + : "0"(cs), "1"(ct), "2"(count)); return __res1; } @@ -124,62 +127,65 @@ int strncmp(const char *cs, const char *ct, size_t count) * You should not use this function to access IO space, use memcpy_toio() * or memcpy_fromio() instead. */ -void * memcpy(void * dest,const void *src,size_t count) +void *memcpy(void *dest, const void *src, size_t count) { - char *tmp = (char *) dest, *s = (char *) src; - -/* Turn off the cache, if destination in the L1 memory */ - if ( (tmp >= (char *)L1_ISRAM) && (tmp < (char *)L1_ISRAM_END) - || (tmp >= (char *)DATA_BANKA_SRAM) && (tmp < DATA_BANKA_SRAM_END) - || (tmp >= (char *)DATA_BANKB_SRAM) && (tmp < DATA_BANKB_SRAM_END) ){ - if(icache_status()){ - blackfin_icache_flush_range(src, src+count); - icache_disable(); - } - if(dcache_status()){ - blackfin_dcache_flush_range(src, src+count); - dcache_disable(); - } - dma_memcpy(dest,src,count); - }else{ - while(count--) - *tmp++ = *s++; + char *tmp = (char *)dest, *s = (char *)src; + + /* L1_ISRAM can only be accessed via dma */ + if ((tmp >= (char *)L1_ISRAM) && (tmp < (char *)L1_ISRAM_END)) { + /* L1 is the destination */ + dma_memcpy(dest, src, count); + + if (icache_status()) { + blackfin_icache_flush_range(src, src + count); + } + } else if ((s >= (char *)L1_ISRAM) && (s < (char *)L1_ISRAM_END)) { + /* L1 is the source */ + dma_memcpy(dest, src, count); + + if (icache_status()) { + blackfin_icache_flush_range(dest, dest + count); + } + if (dcache_status()) { + blackfin_dcache_flush_range(dest, dest + count); + } + } else { + memcpy_ASM(dest, src, count); } return dest; } -void *dma_memcpy(void * dest,const void *src,size_t count) +void *dma_memcpy(void *dest, const void *src, size_t count) { - - *pMDMA_D0_IRQ_STATUS = DMA_DONE | DMA_ERR; - - /* Copy sram functions from sdram to sram */ - /* Setup destination start address */ - *pMDMA_D0_START_ADDR = (volatile void **)dest; - /* Setup destination xcount */ - *pMDMA_D0_X_COUNT = count ; - /* Setup destination xmodify */ - *pMDMA_D0_X_MODIFY = 1; - - /* Setup Source start address */ - *pMDMA_S0_START_ADDR = (volatile void **)src; - /* Setup Source xcount */ - *pMDMA_S0_X_COUNT = count; - /* Setup Source xmodify */ - *pMDMA_S0_X_MODIFY = 1; - - /* Enable source DMA */ - *pMDMA_S0_CONFIG = (DMAEN); - asm("ssync;"); - - *pMDMA_D0_CONFIG = ( WNR | DMAEN); - - while(*pMDMA_D0_IRQ_STATUS & DMA_RUN){ - *pMDMA_D0_IRQ_STATUS |= (DMA_DONE | DMA_ERR); - } + *pMDMA_D0_IRQ_STATUS = DMA_DONE | DMA_ERR; + + /* Copy sram functions from sdram to sram */ + /* Setup destination start address */ + *pMDMA_D0_START_ADDR = (volatile void **)dest; + /* Setup destination xcount */ + *pMDMA_D0_X_COUNT = count; + /* Setup destination xmodify */ + *pMDMA_D0_X_MODIFY = 1; + + /* Setup Source start address */ + *pMDMA_S0_START_ADDR = (volatile void **)src; + /* Setup Source xcount */ + *pMDMA_S0_X_COUNT = count; + /* Setup Source xmodify */ + *pMDMA_S0_X_MODIFY = 1; + + /* Enable source DMA */ + *pMDMA_S0_CONFIG = (DMAEN); + sync(); + + *pMDMA_D0_CONFIG = (WNR | DMAEN); + + while (*pMDMA_D0_IRQ_STATUS & DMA_RUN) { *pMDMA_D0_IRQ_STATUS |= (DMA_DONE | DMA_ERR); + } + *pMDMA_D0_IRQ_STATUS |= (DMA_DONE | DMA_ERR); - dest += count; - src += count; - return dest; + dest += count; + src += count; + return dest; } diff --git a/lib_blackfin/blackfin_board.h b/lib_blackfin/blackfin_board.h index 31c16a2..e0b96da 100644 --- a/lib_blackfin/blackfin_board.h +++ b/lib_blackfin/blackfin_board.h @@ -28,6 +28,8 @@ #ifndef __BLACKFIN_BOARD_H__ #define __BLACKFIN_BOARD_H__ +#include <version.h> + extern void timer_init(void); extern void init_IRQ(void); extern void rtc_init(void); diff --git a/lib_blackfin/board.c b/lib_blackfin/board.c index d9dc2b6..1a0a282 100644 --- a/lib_blackfin/board.c +++ b/lib_blackfin/board.c @@ -32,21 +32,69 @@ #include <version.h> #include <net.h> #include <environment.h> +#include <i2c.h> #include "blackfin_board.h" +#include <asm/cplb.h> #include "../drivers/smc91111.h" -DECLARE_GLOBAL_DATA_PTR; +#if defined(CONFIG_BF537)&&defined(CONFIG_POST) +#include <post.h> +int post_flag; +#endif +#ifndef CFG_NO_FLASH extern flash_info_t flash_info[]; +#endif + +static inline u_long get_vco(void) +{ + u_long msel; + u_long vco; + msel = (*pPLL_CTL >> 9) & 0x3F; + if (0 == msel) + msel = 64; + + vco = CONFIG_CLKIN_HZ; + vco >>= (1 & *pPLL_CTL); /* DF bit */ + vco = msel * vco; + return vco; +} + +/*Get the Core clock*/ +u_long get_cclk(void) +{ + u_long csel, ssel; + if (*pPLL_STAT & 0x1) + return CONFIG_CLKIN_HZ; + + ssel = *pPLL_DIV; + csel = ((ssel >> 4) & 0x03); + ssel &= 0xf; + if (ssel && ssel < (1 << csel)) /* SCLK > CCLK */ + return get_vco() / ssel; + return get_vco() >> csel; +} + +/* Get the System clock */ +u_long get_sclk(void) +{ + u_long ssel; + + if (*pPLL_STAT & 0x1) + return CONFIG_CLKIN_HZ; + + ssel = (*pPLL_DIV & 0xf); + + return get_vco() / ssel; +} static void mem_malloc_init(void) { mem_malloc_start = CFG_MALLOC_BASE; mem_malloc_end = (CFG_MALLOC_BASE + CFG_MALLOC_LEN); mem_malloc_brk = mem_malloc_start; - memset((void *) mem_malloc_start, 0, - mem_malloc_end - mem_malloc_start); + memset((void *)mem_malloc_start, 0, mem_malloc_end - mem_malloc_start); } void *sbrk(ptrdiff_t increment) @@ -59,7 +107,7 @@ void *sbrk(ptrdiff_t increment) } mem_malloc_brk = new; - return ((void *) old); + return ((void *)old); } static int display_banner(void) @@ -78,17 +126,20 @@ static void display_flash_config(ulong size) static int init_baudrate(void) { - uchar tmp[64]; + DECLARE_GLOBAL_DATA_PTR; + + char tmp[64]; int i = getenv_r("baudrate", tmp, sizeof(tmp)); gd->bd->bi_baudrate = gd->baudrate = (i > 0) - ? (int) simple_strtoul(tmp, NULL, 10) - : CONFIG_BAUDRATE; + ? (int)simple_strtoul(tmp, NULL, 10) + : CONFIG_BAUDRATE; return (0); } #ifdef DEBUG static void display_global_data(void) { + DECLARE_GLOBAL_DATA_PTR; bd_t *bd; bd = gd->bd; printf("--flags:%x\n", gd->flags); @@ -103,12 +154,10 @@ static void display_global_data(void) printf("---bi_baudrate:%x\n", bd->bi_baudrate); printf("---bi_ip_addr:%x\n", bd->bi_ip_addr); printf("---bi_enetaddr:%x %x %x %x %x %x\n", - bd->bi_enetaddr[0], - bd->bi_enetaddr[1], - bd->bi_enetaddr[2], - bd->bi_enetaddr[3], - bd->bi_enetaddr[4], - bd->bi_enetaddr[5]); + bd->bi_enetaddr[0], + bd->bi_enetaddr[1], + bd->bi_enetaddr[2], + bd->bi_enetaddr[3], bd->bi_enetaddr[4], bd->bi_enetaddr[5]); printf("---bi_arch_number:%x\n", bd->bi_arch_number); printf("---bi_boot_params:%x\n", bd->bi_boot_params); printf("---bi_memstart:%x\n", bd->bi_memstart); @@ -120,6 +169,71 @@ static void display_global_data(void) } #endif +/* we cover everything with 4 meg pages, and need an extra for L1 */ +unsigned int icplb_table[page_descriptor_table_size][2]; +unsigned int dcplb_table[page_descriptor_table_size][2]; + +void init_cplbtables(void) +{ + int i, j; + + j = 0; + icplb_table[j][0] = 0xFFA00000; + icplb_table[j][1] = L1_IMEMORY; + j++; + + for (i = 0; i <= CONFIG_MEM_SIZE / 4; i++) { + icplb_table[j][0] = (i * 4 * 1024 * 1024); + if (i * 4 * 1024 * 1024 <= CFG_MONITOR_BASE + && (i + 1) * 4 * 1024 * 1024 >= CFG_MONITOR_BASE) { + icplb_table[j][1] = SDRAM_IKERNEL; + } else { + icplb_table[j][1] = SDRAM_IGENERIC; + } + j++; + } +#if defined(CONFIG_BF561) + /* Async Memory space */ + for (i = 0; i < 3; i++) { + icplb_table[j++][0] = 0x20000000 + i * 4 * 1024 * 1024; + icplb_table[j++][1] = SDRAM_IGENERIC; + } +#else + icplb_table[j][0] = 0x20000000; + icplb_table[j][1] = SDRAM_IGENERIC; +#endif + j = 0; + dcplb_table[j][0] = 0xFF800000; + dcplb_table[j][1] = L1_DMEMORY; + j++; + + for (i = 0; i < CONFIG_MEM_SIZE / 4; i++) { + dcplb_table[j][0] = (i * 4 * 1024 * 1024); + if (i * 4 * 1024 * 1024 <= CFG_MONITOR_BASE + && (i + 1) * 4 * 1024 * 1024 >= CFG_MONITOR_BASE) { + dcplb_table[j][1] = SDRAM_DKERNEL; + } else { + dcplb_table[j][1] = SDRAM_DGENERIC; + } + j++; + } + +#if defined(CONFIG_BF561) + /* MAC space */ + dcplb_table[j++][0] = CONFIG_ASYNC_EBIU_BASE; + dcplb_table[j++][1] = SDRAM_EBIU; + + /* Flash space */ + for (i = 0; i < 2; i++) { + dcplb_table[j++][0] = 0x20000000 + i * 4 * 1024 * 1024; + dcplb_table[j++][1] = SDRAM_EBIU; + } +#else + dcplb_table[j][0] = 0x20000000; + dcplb_table[j][1] = SDRAM_EBIU; +#endif +} + /* * All attempts to come up with a "common" initialization sequence * that works for all boards and architectures failed: some of the @@ -135,20 +249,24 @@ static void display_global_data(void) void board_init_f(ulong bootflag) { + DECLARE_GLOBAL_DATA_PTR; ulong addr; bd_t *bd; + int i; + + init_cplbtables(); gd = (gd_t *) (CFG_GBL_DATA_ADDR); - memset((void *) gd, 0, sizeof(gd_t)); + memset((void *)gd, 0, sizeof(gd_t)); /* Board data initialization */ addr = (CFG_GBL_DATA_ADDR + sizeof(gd_t)); /* Align to 4 byte boundary */ addr &= ~(4 - 1); - bd = (bd_t*)addr; + bd = (bd_t *) addr; gd->bd = bd; - memset((void *) bd, 0, sizeof(bd_t)); + memset((void *)bd, 0, sizeof(bd_t)); /* Initialize */ init_IRQ(); @@ -156,21 +274,51 @@ void board_init_f(ulong bootflag) init_baudrate(); /* initialze baudrate settings */ serial_init(); /* serial communications setup */ console_init_f(); +#ifdef CONFIG_ICACHE_ON + icache_enable(); +#endif +#ifdef CONFIG_DCACHE_ON + dcache_enable(); +#endif display_banner(); /* say that we are here */ + + for (i = 0; i < page_descriptor_table_size; i++) { + debug + ("data (%02i)= 0x%08x : 0x%08x intr = 0x%08x : 0x%08x\n", + i, dcplb_table[i][0], dcplb_table[i][1], icplb_table[i][0], + icplb_table[i][1]); + } + checkboard(); #if defined(CONFIG_RTC_BF533) && (CONFIG_COMMANDS & CFG_CMD_DATE) rtc_init(); #endif timer_init(); - printf("Clock: VCO: %lu MHz, Core: %lu MHz, System: %lu MHz\n", \ - CONFIG_VCO_HZ/1000000, CONFIG_CCLK_HZ/1000000, CONFIG_SCLK_HZ/1000000); + printf("Clock: VCO: %lu MHz, Core: %lu MHz, System: %lu MHz\n", + get_vco() / 1000000, get_cclk() / 1000000, get_sclk() / 1000000); printf("SDRAM: "); print_size(initdram(0), "\n"); +#if defined(CONFIG_BF537)&&defined(CONFIG_POST) + post_init_f(); + post_bootmode_init(); + post_run(NULL, POST_ROM | post_bootmode_get(0)); +#endif board_init_r((gd_t *) gd, 0x20000010); } +#if defined(CONFIG_SOFT_I2C) || defined(CONFIG_HARD_I2C) +static int init_func_i2c(void) +{ + puts("I2C: "); + i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE); + puts("ready\n"); + return (0); +} +#endif + void board_init_r(gd_t * id, ulong dest_addr) { + DECLARE_GLOBAL_DATA_PTR; ulong size; extern void malloc_bin_reloc(void); char *s, *e; @@ -180,12 +328,18 @@ void board_init_r(gd_t * id, ulong dest_addr) gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */ bd = gd->bd; -#if CONFIG_STAMP +#if defined(CONFIG_BF537) && defined(CONFIG_POST) + post_output_backlog(); + post_reloc(); +#endif + +#if (CONFIG_STAMP || CONFIG_BF537 || CONFIG_EZKIT561) && !defined(CFG_NO_FLASH) /* There are some other pointer constants we must deal with */ /* configure available FLASH banks */ size = flash_init(); display_flash_config(size); - flash_protect(FLAG_PROTECT_SET, CFG_FLASH_BASE, CFG_FLASH_BASE + 0x1ffff, &flash_info[0]); + flash_protect(FLAG_PROTECT_SET, CFG_FLASH_BASE, + CFG_FLASH_BASE + 0x1ffff, &flash_info[0]); bd->bi_flashstart = CFG_FLASH_BASE; bd->bi_flashsize = size; bd->bi_flashoffset = 0; @@ -198,6 +352,13 @@ void board_init_r(gd_t * id, ulong dest_addr) mem_malloc_init(); malloc_bin_reloc(); +#ifdef CONFIG_SPI +# if ! defined(CFG_ENV_IS_IN_EEPROM) + spi_init_f(); +# endif + spi_init_r(); +#endif + /* relocate environment function pointers etc. */ env_relocate(); @@ -228,18 +389,30 @@ void board_init_r(gd_t * id, ulong dest_addr) copy_filename(BootFile, s, sizeof(BootFile)); } #endif + +#if (CONFIG_COMMANDS & CFG_CMD_NAND) + puts("NAND: "); + nand_init(); /* go init the NAND */ +#endif + #if defined(CONFIG_MISC_INIT_R) /* miscellaneous platform dependent initialisations */ misc_init_r(); #endif +#if ((BFIN_CPU == ADSP_BF537) || (BFIN_CPU == ADSP_BF536)) + printf("Net: "); + eth_initialize(bd); +#endif + #ifdef CONFIG_DRIVER_SMC91111 #ifdef SHARED_RESOURCES /* Switch to Ethernet */ swap_to(ETHERNET); #endif - if ( (SMC_inw(BANK_SELECT) & UPPER_BYTE_MASK) != SMC_IDENT ) { - printf("ERROR: Can't find SMC91111 at address %x\n", SMC_BASE_ADDRESS); + if ((SMC_inw(BANK_SELECT) & UPPER_BYTE_MASK) != SMC_IDENT) { + printf("ERROR: Can't find SMC91111 at address %x\n", + SMC_BASE_ADDRESS); } else { printf("Net: SMC91111 at 0x%08X\n", SMC_BASE_ADDRESS); } @@ -248,12 +421,17 @@ void board_init_r(gd_t * id, ulong dest_addr) swap_to(FLASH); #endif #endif -#ifdef CONFIG_SOFT_I2C +#if defined(CONFIG_SOFT_I2C) || defined(CONFIG_HARD_I2C) init_func_i2c(); #endif #ifdef DEBUG - display_global_data(void); + display_global_data(); +#endif + +#if defined(CONFIG_BF537) && defined(CONFIG_POST) + if (post_flag) + post_run(NULL, POST_RAM | post_bootmode_get(0)); #endif /* main_loop() can return to retry autoboot, if so just run it again. */ @@ -262,18 +440,8 @@ void board_init_r(gd_t * id, ulong dest_addr) } } -#ifdef CONFIG_SOFT_I2C -static int init_func_i2c (void) -{ - puts ("I2C: "); - i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE); - puts ("ready\n"); - return (0); -} -#endif - void hang(void) { puts("### ERROR ### Please RESET the board ###\n"); - for (;;); + for (;;) ; } diff --git a/lib_blackfin/cache.c b/lib_blackfin/cache.c index 847278d..a15914b 100644 --- a/lib_blackfin/cache.c +++ b/lib_blackfin/cache.c @@ -26,15 +26,26 @@ */ /* for now: just dummy functions to satisfy the linker */ -extern void blackfin_icache_range (unsigned long *, unsigned long *); -extern void blackfin_dcache_range (unsigned long *, unsigned long *); -void flush_cache (unsigned long dummy1, unsigned long dummy2) +#include <config.h> +#include <common.h> +#include <asm/blackfin.h> + +extern void blackfin_icache_flush_range(unsigned long, unsigned long); +extern void blackfin_dcache_flush_range(unsigned long, unsigned long); + +void flush_cache(unsigned long dummy1, unsigned long dummy2) { - if (icache_status ()) { - blackfin_icache_flush_range (dummy1, dummy1 + dummy2); - } - if (dcache_status ()) { - blackfin_dcache_flush_range (dummy1, dummy1 + dummy2); - } + if ((dummy1 >= L1_ISRAM) && (dummy1 < L1_ISRAM_END)) + return; + if ((dummy1 >= DATA_BANKA_SRAM) && (dummy1 < DATA_BANKA_SRAM_END)) + return; + if ((dummy1 >= DATA_BANKB_SRAM) && (dummy1 < DATA_BANKB_SRAM_END)) + return; + + if (icache_status()) + blackfin_icache_flush_range(dummy1, dummy1 + dummy2); + if (dcache_status()) + blackfin_dcache_flush_range(dummy1, dummy1 + dummy2); + return; } diff --git a/lib_blackfin/memcmp.S b/lib_blackfin/memcmp.S new file mode 100644 index 0000000..fcea5b3 --- /dev/null +++ b/lib_blackfin/memcmp.S @@ -0,0 +1,109 @@ +/* + * File: arch/blackfin/lib/memcmp.S + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: $Id: memcmp.S 2386 2006-11-01 04:57:26Z magicyang $ + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +.align 2 + +/* + * C Library function MEMCMP + * R0 = First Address + * R1 = Second Address + * R2 = count + * Favours word aligned data. + */ + +.globl _memcmp; +_memcmp: + I1 = P3; + P0 = R0; /* P0 = s1 address */ + P3 = R1; /* P3 = s2 Address */ + P2 = R2 ; /* P2 = count */ + CC = R2 <= 7(IU); + IF CC JUMP .Ltoo_small; + I0 = R1; /* s2 */ + R1 = R1 | R0; /* OR addresses together */ + R1 <<= 30; /* check bottom two bits */ + CC = AZ; /* AZ set if zero. */ + IF !CC JUMP .Lbytes ; /* Jump if addrs not aligned. */ + + P1 = P2 >> 2; /* count = n/4 */ + R3 = 3; + R2 = R2 & R3; /* remainder */ + P2 = R2; /* set remainder */ + + LSETUP (.Lquad_loop_s , .Lquad_loop_e) LC0=P1; +.Lquad_loop_s: + NOP; + R0 = [P0++]; + R1 = [I0++]; + CC = R0 == R1; + IF !CC JUMP .Lquad_different; +.Lquad_loop_e: + NOP; + + P3 = I0; /* s2 */ +.Ltoo_small: + CC = P2 == 0; /* Check zero count*/ + IF CC JUMP .Lfinished; /* very unlikely*/ + +.Lbytes: + LSETUP (.Lbyte_loop_s , .Lbyte_loop_e) LC0=P2; +.Lbyte_loop_s: + R1 = B[P3++](Z); /* *s2 */ + R0 = B[P0++](Z); /* *s1 */ + CC = R0 == R1; + IF !CC JUMP .Ldifferent; +.Lbyte_loop_e: + NOP; + +.Ldifferent: + R0 = R0 - R1; + P3 = I1; + RTS; + +.Lquad_different: +/* We've read two quads which don't match. + * Can't just compare them, because we're + * a little-endian machine, so the MSBs of + * the regs occur at later addresses in the + * string. + * Arrange to re-read those two quads again, + * byte-by-byte. + */ + P0 += -4; /* back up to the start of the */ + P3 = I0; /* quads, and increase the*/ + P2 += 4; /* remainder count*/ + P3 += -4; + JUMP .Lbytes; + +.Lfinished: + R0 = 0; + P3 = I1; + RTS; diff --git a/lib_blackfin/memcpy.S b/lib_blackfin/memcpy.S new file mode 100644 index 0000000..a73ff90 --- /dev/null +++ b/lib_blackfin/memcpy.S @@ -0,0 +1,127 @@ +/* + * File: arch/blackfin/lib/memcpy.S + * Based on: + * Author: + * + * Created: + * Description: internal version of memcpy(), issued by the compiler + * to copy blocks of data around. + * This is really memmove() - it has to be able to deal with + * possible overlaps, because that ambiguity is when the compiler + * gives up and calls a function. We have our own, internal version + * so that we get something we trust, even if the user has redefined + * the normal symbol. + * Rev: $Id: memcpy.S 2775 2007-02-21 13:58:44Z hennerich $ + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +.align 2 + +.globl _memcpy_ASM; +_memcpy_ASM: + CC = R2 <= 0; /* length not positive?*/ + IF CC JUMP .L_P1L2147483647; /* Nothing to do */ + + P0 = R0 ; /* dst*/ + P1 = R1 ; /* src*/ + P2 = R2 ; /* length */ + + /* check for overlapping data */ + CC = R1 < R0; /* src < dst */ + IF !CC JUMP .Lno_overlap; + R3 = R1 + R2; + CC = R0 < R3; /* and dst < src+len */ + IF CC JUMP .Lhas_overlap; + +.Lno_overlap: + /* Check for aligned data.*/ + + R3 = R1 | R0; + R0 = 0x3; + R3 = R3 & R0; + CC = R3; /* low bits set on either address? */ + IF CC JUMP .Lnot_aligned; + + /* Both addresses are word-aligned, so we can copy + at least part of the data using word copies.*/ + P2 = P2 >> 2; + CC = P2 <= 2; + IF !CC JUMP .Lmore_than_seven; + /* less than eight bytes... */ + P2 = R2; + LSETUP(.Lthree_start, .Lthree_end) LC0=P2; + R0 = R1; /* setup src address for return */ +.Lthree_start: + R3 = B[P1++] (X); +.Lthree_end: + B[P0++] = R3; + + RTS; + +.Lmore_than_seven: + /* There's at least eight bytes to copy. */ + P2 += -1; /* because we unroll one iteration */ + LSETUP(.Lword_loop, .Lword_loop) LC0=P2; + R0 = R1; + I1 = P1; + R3 = [I1++]; +.Lword_loop: + MNOP || [P0++] = R3 || R3 = [I1++]; + + [P0++] = R3; + /* Any remaining bytes to copy? */ + R3 = 0x3; + R3 = R2 & R3; + CC = R3 == 0; + P1 = I1; /* in case there's something left, */ + IF !CC JUMP .Lbytes_left; + RTS; +.Lbytes_left: P2 = R3; +.Lnot_aligned: + /* From here, we're copying byte-by-byte. */ + LSETUP (.Lbyte_start , .Lbyte_end) LC0=P2; + R0 = R1; /* Save src address for return */ +.Lbyte_start: + R1 = B[P1++] (X); +.Lbyte_end: + B[P0++] = R1; + +.L_P1L2147483647: + RTS; + +.Lhas_overlap: +/* Need to reverse the copying, because the + * dst would clobber the src. + * Don't bother to work out alignment for + * the reverse case. + */ + R0 = R1; /* save src for later. */ + P0 = P0 + P2; + P0 += -1; + P1 = P1 + P2; + P1 += -1; + LSETUP(.Lover_start, .Lover_end) LC0=P2; +.Lover_start: + R1 = B[P1--] (X); +.Lover_end: + B[P0--] = R1; + + RTS; diff --git a/lib_blackfin/memmove.S b/lib_blackfin/memmove.S new file mode 100644 index 0000000..79558f9 --- /dev/null +++ b/lib_blackfin/memmove.S @@ -0,0 +1,102 @@ +/* + * File: arch/blackfin/lib/memmove.S + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: $Id: memmove.S 2205 2006-09-23 07:53:49Z vapier $ + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +.align 2 + +/* + * C Library function MEMMOVE + * R0 = To Address (leave unchanged to form result) + * R1 = From Address + * R2 = count + * Data may overlap + */ + +.globl _memmove; +_memmove: + I1 = P3; + P0 = R0; /* P0 = To address */ + P3 = R1; /* P3 = From Address */ + P2 = R2 ; /* P2 = count */ + CC = P2 == 0; /* Check zero count*/ + IF CC JUMP .Lfinished; /* very unlikely */ + + CC = R1 < R0 (IU); /* From < To */ + IF !CC JUMP .Lno_overlap; + R3 = R1 + R2; + CC = R0 <= R3 (IU); /* (From+len) >= To */ + IF CC JUMP .Loverlap; +.Lno_overlap: + R3 = 11; + CC = R2 <= R3; + IF CC JUMP .Lbytes; + R3 = R1 | R0; /* OR addresses together */ + R3 <<= 30; /* check bottom two bits */ + CC = AZ; /* AZ set if zero.*/ + IF !CC JUMP .Lbytes ; /* Jump if addrs not aligned.*/ + + I0 = P3; + P1 = P2 >> 2; /* count = n/4 */ + P1 += -1; + R3 = 3; + R2 = R2 & R3; /* remainder */ + P2 = R2; /* set remainder */ + R1 = [I0++]; + + LSETUP (.Lquad_loop , .Lquad_loop) LC0=P1; +.Lquad_loop: MNOP || [P0++] = R1 || R1 = [I0++]; + [P0++] = R1; + + CC = P2 == 0; /* any remaining bytes? */ + P3 = I0; /* Ammend P3 to updated ptr. */ + IF !CC JUMP .Lbytes; + P3 = I1; + RTS; + +.Lbytes: LSETUP (.Lbyte2_s , .Lbyte2_e) LC0=P2; +.Lbyte2_s: R1 = B[P3++](Z); +.Lbyte2_e: B[P0++] = R1; + +.Lfinished: P3 = I1; + RTS; + +.Loverlap: + P2 += -1; + P0 = P0 + P2; + P3 = P3 + P2; + R1 = B[P3--] (Z); + CC = P2 == 0; + IF CC JUMP .Lno_loop; + LSETUP (.Lol_s, .Lol_e) LC0 = P2; +.Lol_s: B[P0--] = R1; +.Lol_e: R1 = B[P3--] (Z); +.Lno_loop: B[P0] = R1; + P3 = I1; + RTS; diff --git a/lib_blackfin/memset.S b/lib_blackfin/memset.S new file mode 100644 index 0000000..7e6ee19 --- /dev/null +++ b/lib_blackfin/memset.S @@ -0,0 +1,103 @@ +/* + * File: arch/blackfin/lib/memset.S + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: $Id: memset.S 2769 2007-02-19 16:45:53Z hennerich $ + * + * Modified: + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + +.align 2 + +/* + * C Library function MEMSET + * R0 = address (leave unchanged to form result) + * R1 = filler byte + * R2 = count + * Favours word aligned data. + */ + +.globl _memset; +_memset: + P0 = R0 ; /* P0 = address */ + P2 = R2 ; /* P2 = count */ + R3 = R0 + R2; /* end */ + CC = R2 <= 7(IU); + IF CC JUMP .Ltoo_small; + R1 = R1.B (Z); /* R1 = fill char */ + R2 = 3; + R2 = R0 & R2; /* addr bottom two bits */ + CC = R2 == 0; /* AZ set if zero. */ + IF !CC JUMP .Lforce_align ; /* Jump if addr not aligned. */ + +.Laligned: + P1 = P2 >> 2; /* count = n/4 */ + R2 = R1 << 8; /* create quad filler */ + R2.L = R2.L + R1.L(NS); + R2.H = R2.L + R1.H(NS); + P2 = R3; + + LSETUP (.Lquad_loop , .Lquad_loop) LC0=P1; +.Lquad_loop: + [P0++] = R2; + + CC = P0 == P2; + IF !CC JUMP .Lbytes_left; + RTS; + +.Lbytes_left: + R2 = R3; /* end point */ + R3 = P0; /* current position */ + R2 = R2 - R3; /* bytes left */ + P2 = R2; + +.Ltoo_small: + CC = P2 == 0; /* Check zero count */ + IF CC JUMP .Lfinished; /* Unusual */ + +.Lbytes: + LSETUP (.Lbyte_loop , .Lbyte_loop) LC0=P2; +.Lbyte_loop: + B[P0++] = R1; + +.Lfinished: + RTS; + +.Lforce_align: + CC = BITTST (R0, 0); /* odd byte */ + R0 = 4; + R0 = R0 - R2; + P1 = R0; + R0 = P0; /* Recover return address */ + IF !CC JUMP .Lskip1; + B[P0++] = R1; +.Lskip1: + CC = R2 <= 2; /* 2 bytes */ + P2 -= P1; /* reduce count */ + IF !CC JUMP .Laligned; + B[P0++] = R1; + B[P0++] = R1; + JUMP .Laligned; diff --git a/lib_blackfin/muldi3.c b/lib_blackfin/muldi3.c index 1fc34e3..da55711 100644 --- a/lib_blackfin/muldi3.c +++ b/lib_blackfin/muldi3.c @@ -64,29 +64,29 @@ do { \ __w.ll; }) #endif -typedef unsigned int USItype __attribute__ ((mode (SI))); -typedef int SItype __attribute__ ((mode (SI))); -typedef int DItype __attribute__ ((mode (DI))); -typedef int word_type __attribute__ ((mode (__word__))); +typedef unsigned int USItype __attribute__ ((mode(SI))); +typedef int SItype __attribute__ ((mode(SI))); +typedef int DItype __attribute__ ((mode(DI))); +typedef int word_type __attribute__ ((mode(__word__))); -struct DIstruct {SItype low, high;}; -typedef union -{ +struct DIstruct { + SItype low, high; +}; +typedef union { struct DIstruct s; DItype ll; } DIunion; -DItype __muldi3 (DItype u, DItype v) +DItype __muldi3(DItype u, DItype v) { DIunion w; DIunion uu, vv; - uu.ll = u, - vv.ll = v; + uu.ll = u, vv.ll = v; /* panic("kernel panic for __muldi3"); */ - w.ll = __umulsidi3 (uu.s.low, vv.s.low); + w.ll = __umulsidi3(uu.s.low, vv.s.low); w.s.high += ((USItype) uu.s.low * (USItype) vv.s.high - + (USItype) uu.s.high * (USItype) vv.s.low); + + (USItype) uu.s.high * (USItype) vv.s.low); return w.ll; } diff --git a/lib_blackfin/post.c b/lib_blackfin/post.c new file mode 100644 index 0000000..0e76026 --- /dev/null +++ b/lib_blackfin/post.c @@ -0,0 +1,435 @@ +/* + * (C) Copyright 2002 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <console.h> +#include <watchdog.h> +#include <post.h> + +#ifdef CONFIG_LOGBUFFER +#include <logbuff.h> +#endif + +#ifdef CONFIG_POST + +#define POST_MAX_NUMBER 32 + +#define BOOTMODE_MAGIC 0xDEAD0000 + +int post_init_f(void) +{ + DECLARE_GLOBAL_DATA_PTR; + + int res = 0; + unsigned int i; + + for (i = 0; i < post_list_size; i++) { + struct post_test *test = post_list + i; + + if (test->init_f && test->init_f()) { + res = -1; + } + } + + gd->post_init_f_time = post_time_ms(0); + if (!gd->post_init_f_time) { + printf + ("post/post.c: post_time_ms seems not to be implemented\n"); + } + + return res; +} + +void post_bootmode_init(void) +{ + DECLARE_GLOBAL_DATA_PTR; + int bootmode = post_bootmode_get(0); + int newword; + + if (post_hotkeys_pressed() && !(bootmode & POST_POWERTEST)) { + newword = BOOTMODE_MAGIC | POST_SLOWTEST; + } else if (bootmode == 0) { + newword = BOOTMODE_MAGIC | POST_POWERON; + } else if (bootmode == POST_POWERON || bootmode == POST_SLOWTEST) { + newword = BOOTMODE_MAGIC | POST_NORMAL; + } else { + /* Use old value */ + newword = post_word_load() & ~POST_COLDBOOT; + } + + if (bootmode == 0) { + /* We are booting after power-on */ + newword |= POST_COLDBOOT; + } + + post_word_store(newword); + + /* Reset activity record */ + gd->post_log_word = 0; +} + +int post_bootmode_get(unsigned int *last_test) +{ + unsigned long word = post_word_load(); + int bootmode; + + if ((word & 0xFFFF0000) != BOOTMODE_MAGIC) { + return 0; + } + + bootmode = word & 0x7F; + + if (last_test && (bootmode & POST_POWERTEST)) { + *last_test = (word >> 8) & 0xFF; + } + + return bootmode; +} + +/* POST tests run before relocation only mark status bits .... */ +static void post_log_mark_start(unsigned long testid) +{ + DECLARE_GLOBAL_DATA_PTR; + gd->post_log_word |= (testid) << 16; +} + +static void post_log_mark_succ(unsigned long testid) +{ + DECLARE_GLOBAL_DATA_PTR; + gd->post_log_word |= testid; +} + +/* ... and the messages are output once we are relocated */ +void post_output_backlog(void) +{ + DECLARE_GLOBAL_DATA_PTR; + int j; + + for (j = 0; j < post_list_size; j++) { + if (gd->post_log_word & (post_list[j].testid << 16)) { + post_log("POST %s ", post_list[j].cmd); + if (gd->post_log_word & post_list[j].testid) + post_log("PASSED\n"); + else { + post_log("FAILED\n"); +#ifdef CONFIG_SHOW_BOOT_PROGRESS + show_boot_progress(-31); +#endif + } + } + } +} + +static void post_bootmode_test_on(unsigned int last_test) +{ + unsigned long word = post_word_load(); + + word |= POST_POWERTEST; + + word |= (last_test & 0xFF) << 8; + + post_word_store(word); +} + +static void post_bootmode_test_off(void) +{ + unsigned long word = post_word_load(); + + word &= ~POST_POWERTEST; + + post_word_store(word); +} + +static void post_get_flags(int *test_flags) +{ + int flag[] = { POST_POWERON, POST_NORMAL, POST_SLOWTEST }; + char *var[] = { "post_poweron", "post_normal", "post_slowtest" }; + int varnum = sizeof(var) / sizeof(var[0]); + char list[128]; /* long enough for POST list */ + char *name; + char *s; + int last; + int i, j; + + for (j = 0; j < post_list_size; j++) { + test_flags[j] = post_list[j].flags; + } + + for (i = 0; i < varnum; i++) { + if (getenv_r(var[i], list, sizeof(list)) <= 0) + continue; + + for (j = 0; j < post_list_size; j++) { + test_flags[j] &= ~flag[i]; + } + + last = 0; + name = list; + while (!last) { + while (*name && *name == ' ') + name++; + if (*name == 0) + break; + s = name + 1; + while (*s && *s != ' ') + s++; + if (*s == 0) + last = 1; + else + *s = 0; + + for (j = 0; j < post_list_size; j++) { + if (strcmp(post_list[j].cmd, name) == 0) { + test_flags[j] |= flag[i]; + break; + } + } + + if (j == post_list_size) { + printf("No such test: %s\n", name); + } + + name = s + 1; + } + } + + for (j = 0; j < post_list_size; j++) { + if (test_flags[j] & POST_POWERON) { + test_flags[j] |= POST_SLOWTEST; + } + } +} + +static int post_run_single(struct post_test *test, + int test_flags, int flags, unsigned int i) +{ + if ((flags & test_flags & POST_ALWAYS) && + (flags & test_flags & POST_MEM)) { + WATCHDOG_RESET(); + + if (!(flags & POST_REBOOT)) { + if ((test_flags & POST_REBOOT) + && !(flags & POST_MANUAL)) { + post_bootmode_test_on(i); + } + + if (test_flags & POST_PREREL) + post_log_mark_start(test->testid); + else + post_log("POST %s ", test->cmd); + } + + if (test_flags & POST_PREREL) { + if ((*test->test) (flags) == 0) + post_log_mark_succ(test->testid); + } else { + if ((*test->test) (flags) != 0) { + post_log("FAILED\n"); +#ifdef CONFIG_SHOW_BOOT_PROGRESS + show_boot_progress(-32); +#endif + } else + post_log("PASSED\n"); + } + + if ((test_flags & POST_REBOOT) && !(flags & POST_MANUAL)) { + post_bootmode_test_off(); + } + + return 0; + } else { + return -1; + } +} + +int post_run(char *name, int flags) +{ + unsigned int i; + int test_flags[POST_MAX_NUMBER]; + + post_get_flags(test_flags); + + if (name == NULL) { + unsigned int last; + + if (post_bootmode_get(&last) & POST_POWERTEST) { + if (last < post_list_size && + (flags & test_flags[last] & POST_ALWAYS) && + (flags & test_flags[last] & POST_MEM)) { + + post_run_single(post_list + last, + test_flags[last], + flags | POST_REBOOT, last); + + for (i = last + 1; i < post_list_size; i++) { + post_run_single(post_list + i, + test_flags[i], + flags, i); + } + } + } else { + for (i = 0; i < post_list_size; i++) { + post_run_single(post_list + i, + test_flags[i], flags, i); + } + } + + return 0; + } else { + for (i = 0; i < post_list_size; i++) { + if (strcmp(post_list[i].cmd, name) == 0) + break; + } + + if (i < post_list_size) { + return post_run_single(post_list + i, + test_flags[i], flags, i); + } else { + return -1; + } + } +} + +static int post_info_single(struct post_test *test, int full) +{ + if (test->flags & POST_MANUAL) { + if (full) + printf("%s - %s\n" + " %s\n", test->cmd, test->name, test->desc); + else + printf(" %-15s - %s\n", test->cmd, test->name); + + return 0; + } else { + return -1; + } +} + +int post_info(char *name) +{ + unsigned int i; + + if (name == NULL) { + for (i = 0; i < post_list_size; i++) { + post_info_single(post_list + i, 0); + } + + return 0; + } else { + for (i = 0; i < post_list_size; i++) { + if (strcmp(post_list[i].cmd, name) == 0) + break; + } + + if (i < post_list_size) { + return post_info_single(post_list + i, 1); + } else { + return -1; + } + } +} + +int post_log(char *format, ...) +{ + va_list args; + uint i; + char printbuffer[CFG_PBSIZE]; + + va_start(args, format); + + /* For this to work, printbuffer must be larger than + * anything we ever want to print. + */ + i = vsprintf(printbuffer, format, args); + va_end(args); + +#ifdef CONFIG_LOGBUFFER + /* Send to the logbuffer */ + logbuff_log(printbuffer); +#else + /* Send to the stdout file */ + puts(printbuffer); +#endif + + return 0; +} + +void post_reloc(void) +{ + DECLARE_GLOBAL_DATA_PTR; + + unsigned int i; + + /* + * We have to relocate the test table manually + */ + for (i = 0; i < post_list_size; i++) { + ulong addr; + struct post_test *test = post_list + i; + + if (test->name) { + addr = (ulong) (test->name) + gd->reloc_off; + test->name = (char *)addr; + } + + if (test->cmd) { + addr = (ulong) (test->cmd) + gd->reloc_off; + test->cmd = (char *)addr; + } + + if (test->desc) { + addr = (ulong) (test->desc) + gd->reloc_off; + test->desc = (char *)addr; + } + + if (test->test) { + addr = (ulong) (test->test) + gd->reloc_off; + test->test = (int (*)(int flags))addr; + } + + if (test->init_f) { + addr = (ulong) (test->init_f) + gd->reloc_off; + test->init_f = (int (*)(void))addr; + } + + if (test->reloc) { + addr = (ulong) (test->reloc) + gd->reloc_off; + test->reloc = (void (*)(void))addr; + + test->reloc(); + } + } +} + +/* + * Some tests (e.g. SYSMON) need the time when post_init_f started, + * but we cannot use get_timer() at this point. + * + * On PowerPC we implement it using the timebase register. + */ +unsigned long post_time_ms(unsigned long base) +{ + return (unsigned long)get_ticks() / (get_tbclk() / CFG_HZ) - base; +} + +#endif /* CONFIG_POST */ diff --git a/lib_blackfin/tests.c b/lib_blackfin/tests.c new file mode 100644 index 0000000..051649d --- /dev/null +++ b/lib_blackfin/tests.c @@ -0,0 +1,253 @@ +/* + * (C) Copyright 2002 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Be sure to mark tests to be run before relocation as such with the + * CFG_POST_PREREL flag so that logging is done correctly if the + * logbuffer support is enabled. + */ + +#include <common.h> +#include <config.h> +#ifdef CONFIG_POST + +#include <post.h> +#define CFG_POST_FLASH 0x00004000 +#define CFG_POST_LED 0x00008000 +#define CFG_POST_BUTTON 0x00010000 + +extern int cache_post_test(int flags); +extern int watchdog_post_test(int flags); +extern int i2c_post_test(int flags); +extern int rtc_post_test(int flags); +extern int memory_post_test(int flags); +extern int cpu_post_test(int flags); +extern int uart_post_test(int flags); +extern int ether_post_test(int flags); +extern int spi_post_test(int flags); +extern int usb_post_test(int flags); +extern int spr_post_test(int flags); +extern int sysmon_post_test(int flags); +extern int dsp_post_test(int flags); +extern int codec_post_test(int flags); + +extern int sysmon_init_f(void); + +extern void sysmon_reloc(void); + +extern int flash_post_test(int flags); +extern int led_post_test(int flags); +extern int button_post_test(int flags); + +struct post_test post_list[] = { +#if CONFIG_POST & CFG_POST_CACHE + { + "Cache test", + "cache", + "This test verifies the CPU cache operation.", + POST_RAM | POST_ALWAYS, + &cache_post_test, + NULL, + NULL, + CFG_POST_CACHE}, +#endif +#if CONFIG_POST & CFG_POST_WATCHDOG + { + "Watchdog timer test", + "watchdog", + "This test checks the watchdog timer.", + POST_RAM | POST_POWERON | POST_SLOWTEST | POST_MANUAL | POST_REBOOT, + &watchdog_post_test, + NULL, + NULL, + CFG_POST_WATCHDOG}, +#endif +#if CONFIG_POST & CFG_POST_I2C + { + "I2C test", + "i2c", + "This test verifies the I2C operation.", + POST_RAM | POST_ALWAYS, + &i2c_post_test, + NULL, + NULL, + CFG_POST_I2C}, +#endif +#if CONFIG_POST & CFG_POST_RTC + { + "RTC test", + "rtc", + "This test verifies the RTC operation.", + POST_RAM | POST_SLOWTEST | POST_MANUAL, + &rtc_post_test, + NULL, + NULL, + CFG_POST_RTC}, +#endif +#if CONFIG_POST & CFG_POST_MEMORY + { + "Memory test", + "memory", + "This test checks RAM.", + POST_ROM | POST_POWERON | POST_SLOWTEST | POST_PREREL, + &memory_post_test, + NULL, + NULL, + CFG_POST_MEMORY}, +#endif +#if CONFIG_POST & CFG_POST_CPU + { + "CPU test", + "cpu", + "This test verifies the arithmetic logic unit of" " CPU.", + POST_RAM | POST_ALWAYS, + &cpu_post_test, + NULL, + NULL, + CFG_POST_CPU}, +#endif +#if CONFIG_POST & CFG_POST_UART + { + "UART test", + "uart", + "This test verifies the UART operation.", + POST_RAM | POST_SLOWTEST | POST_MANUAL, + &uart_post_test, + NULL, + NULL, + CFG_POST_UART}, +#endif +#if CONFIG_POST & CFG_POST_ETHER + { + "ETHERNET test", + "ethernet", + "This test verifies the ETHERNET operation.", + POST_RAM | POST_ALWAYS | POST_MANUAL, + ðer_post_test, + NULL, + NULL, + CFG_POST_ETHER}, +#endif +#if CONFIG_POST & CFG_POST_SPI + { + "SPI test", + "spi", + "This test verifies the SPI operation.", + POST_RAM | POST_ALWAYS | POST_MANUAL, + &spi_post_test, + NULL, + NULL, + CFG_POST_SPI}, +#endif +#if CONFIG_POST & CFG_POST_USB + { + "USB test", + "usb", + "This test verifies the USB operation.", + POST_RAM | POST_ALWAYS | POST_MANUAL, + &usb_post_test, + NULL, + NULL, + CFG_POST_USB}, +#endif +#if CONFIG_POST & CFG_POST_SPR + { + "SPR test", + "spr", + "This test checks SPR contents.", + POST_ROM | POST_ALWAYS | POST_PREREL, + &spr_post_test, + NULL, + NULL, + CFG_POST_SPR}, +#endif +#if CONFIG_POST & CFG_POST_SYSMON + { + "SYSMON test", + "sysmon", + "This test monitors system hardware.", + POST_RAM | POST_ALWAYS, + &sysmon_post_test, + &sysmon_init_f, + &sysmon_reloc, + CFG_POST_SYSMON}, +#endif +#if CONFIG_POST & CFG_POST_DSP + { + "DSP test", + "dsp", + "This test checks any connected DSP(s).", + POST_RAM | POST_MANUAL, + &dsp_post_test, + NULL, + NULL, + CFG_POST_DSP}, +#endif +#if CONFIG_POST & CFG_POST_CODEC + { + "CODEC test", + "codec", + "This test checks any connected codec(s).", + POST_RAM | POST_MANUAL, + &codec_post_test, + NULL, + NULL, + CFG_POST_CODEC}, +#endif +#if CONFIG_POST & CFG_POST_FLASH + { + "FLASH test", + "flash", + "This test checks flash.", + POST_RAM | POST_ALWAYS | POST_MANUAL, + &flash_post_test, + NULL, + NULL, + CFG_POST_FLASH}, +#endif +#if CONFIG_POST & CFG_POST_LED + { + "LED test", + "LED", + "This test checks LED ", + POST_RAM | POST_ALWAYS | POST_MANUAL, + &led_post_test, + NULL, + NULL, + CFG_POST_LED}, +#endif +#if CONFIG_POST & CFG_POST_BUTTON + { + "Button test", + "button", + "This test checks Button ", + POST_RAM | POST_ALWAYS | POST_MANUAL, + &button_post_test, + NULL, + NULL, + CFG_POST_BUTTON}, +#endif + +}; + +unsigned int post_list_size = sizeof(post_list) / sizeof(struct post_test); + +#endif /* CONFIG_POST */ diff --git a/rtc/Makefile b/rtc/Makefile index cdc8ac9..96c68c0 100644 --- a/rtc/Makefile +++ b/rtc/Makefile @@ -28,7 +28,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)librtc.a COBJS = date.o \ - bf533_rtc.o ds12887.o ds1302.o ds1306.o ds1307.o \ + bf5xx_rtc.o ds12887.o ds1302.o ds1306.o ds1307.o \ ds1337.o ds1374.o ds1556.o ds164x.o ds174x.o ds3231.o \ m41t11.o max6900.o m48t35ax.o mc146818.o mk48t59.o \ mpc5xxx.o mpc8xx.o pcf8563.o s3c24x0_rtc.o rs5c372.o diff --git a/rtc/bf533_rtc.c b/rtc/bf5xx_rtc.c index 948be64..85bbb56 100644 --- a/rtc/bf533_rtc.c +++ b/rtc/bf5xx_rtc.c @@ -49,36 +49,36 @@ #include <command.h> #include <rtc.h> -#if defined(CONFIG_RTC_BF533) && (CONFIG_COMMANDS & CFG_CMD_DATE) +#if defined(CONFIG_RTC_BFIN) && (CONFIG_COMMANDS & CFG_CMD_DATE) #include <asm/blackfin.h> -#include <asm/cpu/bf533_rtc.h> +#include <asm/arch/bf5xx_rtc.h> -void rtc_reset (void) +void rtc_reset(void) { return; /* nothing to do */ } /* Wait for pending writes to complete */ -void wait_for_complete (void) +void wait_for_complete(void) { - while (!(*(volatile unsigned short *) RTC_ISTAT & 0x8000)) { - printf (""); + while (!(*(volatile unsigned short *)RTC_ISTAT & 0x8000)) { + printf(""); } - *(volatile unsigned short *) RTC_ISTAT = 0x8000; + *(volatile unsigned short *)RTC_ISTAT = 0x8000; } /* Enable the RTC prescaler enable register */ -void rtc_init () +void rtc_init() { - *(volatile unsigned short *) RTC_PREN = 0x1; - wait_for_complete (); + *(volatile unsigned short *)RTC_PREN = 0x1; + wait_for_complete(); } /* Set the time. Get the time_in_secs which is the number of seconds since Jan 1970 and set the RTC registers * based on this value. */ -void rtc_set (struct rtc_time *tmp) +void rtc_set(struct rtc_time *tmp) { unsigned long n_days_1970 = 0; unsigned long n_secs_rem = 0; @@ -88,46 +88,46 @@ void rtc_set (struct rtc_time *tmp) unsigned long time_in_secs; if (tmp == NULL) { - printf ("Error setting the date/time \n"); + printf("Error setting the date/time \n"); return; } time_in_secs = - mktime (tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_hour, - tmp->tm_min, tmp->tm_sec); + mktime(tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_hour, + tmp->tm_min, tmp->tm_sec); /* Compute no. of days since 1970 */ - n_days_1970 = (unsigned long) (time_in_secs / (NUM_SECS_IN_DAY)); + n_days_1970 = (unsigned long)(time_in_secs / (NUM_SECS_IN_DAY)); /* From the remining secs, compute the hrs(0-23), mins(0-59) and secs(0-59) */ - n_secs_rem = (unsigned long) (time_in_secs % (NUM_SECS_IN_DAY)); + n_secs_rem = (unsigned long)(time_in_secs % (NUM_SECS_IN_DAY)); n_hrs = n_secs_rem / (NUM_SECS_IN_HOUR); n_secs_rem = n_secs_rem % (NUM_SECS_IN_HOUR); n_mins = n_secs_rem / (NUM_SECS_IN_MIN); n_secs = n_secs_rem % (NUM_SECS_IN_MIN); /* Store the new time in the RTC_STAT register */ - *(volatile unsigned long *) RTC_STAT = - ((n_days_1970 << DAY_BITS_OFF) | (n_hrs << HOUR_BITS_OFF) | - (n_mins << MIN_BITS_OFF) | (n_secs << SEC_BITS_OFF)); + *(volatile unsigned long *)RTC_STAT = + ((n_days_1970 << DAY_BITS_OFF) | (n_hrs << HOUR_BITS_OFF) | + (n_mins << MIN_BITS_OFF) | (n_secs << SEC_BITS_OFF)); - wait_for_complete (); + wait_for_complete(); } /* Read the time from the RTC_STAT. time_in_seconds is seconds since Jan 1970 */ -void rtc_get (struct rtc_time *tmp) +void rtc_get(struct rtc_time *tmp) { unsigned long cur_rtc_stat = 0; unsigned long time_in_sec; unsigned long tm_sec = 0, tm_min = 0, tm_hour = 0, tm_day = 0; if (tmp == NULL) { - printf ("Error getting the date/time \n"); + printf("Error getting the date/time \n"); return; } /* Read the RTC_STAT register */ - cur_rtc_stat = *(volatile unsigned long *) RTC_STAT; + cur_rtc_stat = *(volatile unsigned long *)RTC_STAT; /* Get the secs (0-59), mins (0-59), hrs (0-23) and the days since Jan 1970 */ tm_sec = (cur_rtc_stat >> SEC_BITS_OFF) & 0x3f; @@ -137,9 +137,7 @@ void rtc_get (struct rtc_time *tmp) /* Calculate the total number of seconds since Jan 1970 */ time_in_sec = (tm_sec) + - MIN_TO_SECS (tm_min) + - HRS_TO_SECS (tm_hour) + - DAYS_TO_SECS (tm_day); - to_tm (time_in_sec, tmp); + MIN_TO_SECS(tm_min) + HRS_TO_SECS(tm_hour) + DAYS_TO_SECS(tm_day); + to_tm(time_in_sec, tmp); } -#endif /* CONFIG_RTC_BF533 && CFG_CMD_DATE */ +#endif /* CONFIG_RTC_BFIN && CFG_CMD_DATE */ |