summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--.gitignore1
-rw-r--r--MAINTAINERS9
-rw-r--r--arch/arm/cpu/arm1136/mx31/generic.c2
-rw-r--r--arch/arm/cpu/arm1136/mx31/timer.c4
-rw-r--r--arch/arm/cpu/arm926ejs/davinci/Makefile3
-rw-r--r--arch/arm/cpu/arm926ejs/davinci/am1808_lowlevel.c428
-rw-r--r--arch/arm/cpu/arm926ejs/davinci/cpu.c16
-rw-r--r--arch/arm/cpu/arm926ejs/davinci/ksz8873.c68
-rw-r--r--arch/arm/cpu/arm926ejs/davinci/timer.c46
-rw-r--r--arch/arm/cpu/arm926ejs/mx25/generic.c53
-rw-r--r--arch/arm/cpu/arm926ejs/start.S9
-rw-r--r--arch/arm/cpu/armv7/mx5/clock.c114
-rw-r--r--arch/arm/cpu/armv7/omap-common/Makefile6
-rw-r--r--arch/arm/cpu/armv7/omap-common/spl.c165
-rw-r--r--arch/arm/cpu/armv7/omap-common/spl_mmc.c150
-rw-r--r--arch/arm/cpu/armv7/omap-common/spl_nand.c71
-rw-r--r--arch/arm/cpu/armv7/omap3/board.c50
-rw-r--r--arch/arm/cpu/armv7/omap3/config.mk30
-rw-r--r--arch/arm/cpu/armv7/omap3/lowlevel_init.S10
-rw-r--r--arch/arm/cpu/armv7/omap3/sdrc.c32
-rw-r--r--arch/arm/cpu/armv7/omap3/sys_info.c2
-rw-r--r--arch/arm/cpu/armv7/omap4/board.c1
-rw-r--r--arch/arm/include/asm/arch-armada100/armada100.h58
-rw-r--r--arch/arm/include/asm/arch-armada100/gpio.h48
-rw-r--r--arch/arm/include/asm/arch-armada100/mfp.h19
-rw-r--r--arch/arm/include/asm/arch-davinci/am1808_lowlevel.h44
-rw-r--r--arch/arm/include/asm/arch-davinci/ddr2_defs.h96
-rw-r--r--arch/arm/include/asm/arch-davinci/emac_defs.h6
-rw-r--r--arch/arm/include/asm/arch-davinci/gpio.h2
-rw-r--r--arch/arm/include/asm/arch-davinci/hardware.h30
-rw-r--r--arch/arm/include/asm/arch-davinci/timer_defs.h44
-rw-r--r--arch/arm/include/asm/arch-mx25/imx-regs.h4
-rw-r--r--arch/arm/include/asm/arch-mx25/sys_proto.h29
-rw-r--r--arch/arm/include/asm/arch-mx27/imx-regs.h1
-rw-r--r--arch/arm/include/asm/arch-mx31/imx-regs.h2
-rw-r--r--arch/arm/include/asm/arch-mx35/imx-regs.h2
-rw-r--r--arch/arm/include/asm/arch-mx5/crm_regs.h11
-rw-r--r--arch/arm/include/asm/arch-mx5/imx-regs.h5
-rw-r--r--arch/arm/include/asm/arch-omap3/mem.h36
-rw-r--r--arch/arm/include/asm/arch-omap3/omap_gpmc.h9
-rw-r--r--arch/arm/include/asm/arch-omap3/sys_proto.h1
-rw-r--r--arch/arm/include/asm/arch-omap4/omap4.h8
-rw-r--r--arch/arm/include/asm/omap_common.h31
-rw-r--r--board/Marvell/gplugd/gplugd.c71
-rw-r--r--board/efikamx/efikamx.c124
-rw-r--r--board/efikamx/imximage_mx.cfg (renamed from board/efikamx/imximage.cfg)0
-rw-r--r--board/efikamx/imximage_sb.cfg122
-rw-r--r--board/freescale/mx25pdk/Makefile49
-rw-r--r--board/freescale/mx25pdk/imximage.cfg73
-rw-r--r--board/freescale/mx25pdk/lowlevel_init.S21
-rw-r--r--board/freescale/mx25pdk/mx25pdk.c56
-rw-r--r--board/freescale/mx31ads/mx31ads.c7
-rw-r--r--board/freescale/mx31pdk/mx31pdk.c7
-rw-r--r--board/freescale/mx51evk/mx51evk.c1
-rw-r--r--board/freescale/mx53ard/mx53ard.c1
-rw-r--r--board/freescale/mx53evk/mx53evk.c1
-rw-r--r--board/freescale/mx53loco/mx53loco.c1
-rw-r--r--board/freescale/mx53smd/mx53smd.c1
-rw-r--r--board/isee/igep0020/igep0020.c1
-rw-r--r--board/isee/igep0020/igep0020.h9
-rw-r--r--board/karo/tx25/tx25.c3
-rw-r--r--board/logicpd/imx31_litekit/imx31_litekit.c7
-rw-r--r--board/overo/overo.c1
-rw-r--r--board/overo/overo.h11
-rw-r--r--board/syteco/zmx25/zmx25.c8
-rw-r--r--board/timll/devkit8000/devkit8000.c2
-rw-r--r--board/ttcontrol/vision2/vision2.c1
-rw-r--r--boards.cfg5
-rw-r--r--doc/README.SPL2
-rw-r--r--doc/README.davinci9
-rw-r--r--drivers/block/mxc_ata.c22
-rw-r--r--drivers/gpio/Makefile1
-rw-r--r--drivers/gpio/mvgpio.c115
-rw-r--r--drivers/gpio/mvgpio.h74
-rw-r--r--drivers/i2c/davinci_i2c.c5
-rw-r--r--drivers/i2c/mxc_i2c.c422
-rw-r--r--drivers/misc/fsl_pmic.c2
-rw-r--r--drivers/mmc/omap_hsmmc.c34
-rw-r--r--drivers/mtd/nand/Makefile10
-rw-r--r--drivers/mtd/nand/nand_base.c4
-rw-r--r--drivers/mtd/nand/nand_spl_simple.c245
-rw-r--r--drivers/mtd/nand/omap_gpmc.c27
-rw-r--r--drivers/net/Makefile1
-rw-r--r--drivers/net/armada100_fec.c736
-rw-r--r--drivers/net/armada100_fec.h232
-rw-r--r--drivers/net/davinci_emac.c12
-rw-r--r--drivers/net/fec_mxc.c170
-rw-r--r--drivers/net/fec_mxc.h9
-rw-r--r--drivers/power/twl6030.c7
-rw-r--r--drivers/rtc/Makefile1
-rw-r--r--drivers/rtc/davinci.c125
-rw-r--r--include/configs/devkit8000.h48
-rw-r--r--include/configs/efikamx.h6
-rw-r--r--include/configs/gplugd.h30
-rw-r--r--include/configs/imx31_litekit.h4
-rw-r--r--include/configs/mx25pdk.h108
-rw-r--r--include/configs/mx31ads.h2
-rw-r--r--include/configs/mx31pdk.h4
-rw-r--r--include/configs/mx51evk.h1
-rw-r--r--include/configs/mx53ard.h2
-rw-r--r--include/configs/mx53evk.h2
-rw-r--r--include/configs/mx53loco.h2
-rw-r--r--include/configs/mx53smd.h4
-rw-r--r--include/configs/omap3_evm.h2
-rw-r--r--include/configs/omap4_common.h2
-rw-r--r--include/configs/omap4_sdp4430.h2
-rw-r--r--include/configs/vision2.h2
-rw-r--r--include/configs/zmx25.h1
-rw-r--r--include/nand.h6
-rw-r--r--include/netdev.h8
-rw-r--r--include/twl6030.h3
-rw-r--r--nand_spl/board/freescale/mx31pdk/Makefile2
-rw-r--r--nand_spl/board/freescale/mx31pdk/config.mk1
-rw-r--r--spl/Makefile2
114 files changed, 4346 insertions, 502 deletions
diff --git a/.gitignore b/.gitignore
index 2a82cd9..289ffab 100644
--- a/.gitignore
+++ b/.gitignore
@@ -19,6 +19,7 @@
# Top-level generic files
#
+/MLO
/System.map
/u-boot
/u-boot.hex
diff --git a/MAINTAINERS b/MAINTAINERS
index 5b2fb57..287938a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -634,6 +634,7 @@ Kristoffer Ericson <kristoffer.ericson@gmail.com>
Fabio Estevam <fabio.estevam@freescale.com>
+ mx25pdk i.MX25
mx31pdk i.MX31
mx53ard i.MX53
mx53smd i.MX53
@@ -797,8 +798,6 @@ Nomadik Linux Team <STN_WMM_nomadik_linux@list.st.com>
Steve Sakoman <sakoman@gmail.com>
omap3_overo ARM ARMV7 (OMAP3xx SoC)
- omap4_panda ARM ARMV7 (OMAP4xx SoC)
- omap4_sdp4430 ARM ARMV7 (OMAP4xx SoC)
Jens Scharsig <esw@bus-elektronik.de>
@@ -838,6 +837,11 @@ Greg Ungerer <greg.ungerer@opengear.com>
cm4116 ks8695p
cm4148 ks8695p
+Aneesh V <aneesh@ti.com>
+
+ omap4_panda ARM ARMV7 (OMAP4xx SoC)
+ omap4_sdp4430 ARM ARMV7 (OMAP4xx SoC)
+
Marek Vasut <marek.vasut@gmail.com>
balloon3 xscale/pxa
@@ -847,6 +851,7 @@ Marek Vasut <marek.vasut@gmail.com>
vpac270 xscale/pxa
zipitz2 xscale/pxa
efikamx i.MX51
+ efikasb i.MX51
Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
diff --git a/arch/arm/cpu/arm1136/mx31/generic.c b/arch/arm/cpu/arm1136/mx31/generic.c
index e3a4d1b..c6def5d 100644
--- a/arch/arm/cpu/arm1136/mx31/generic.c
+++ b/arch/arm/cpu/arm1136/mx31/generic.c
@@ -180,7 +180,7 @@ int print_cpuinfo (void)
{
u32 srev = get_cpu_rev();
- printf("CPU: Freescale i.MX31 rev %d.%d%s at %d MHz.",
+ printf("CPU: Freescale i.MX31 rev %d.%d%s at %d MHz.\n",
(srev & 0xF0) >> 4, (srev & 0x0F),
((srev & 0x8000) ? " unknown" : ""),
mx31_get_mcu_main_clk() / 1000000);
diff --git a/arch/arm/cpu/arm1136/mx31/timer.c b/arch/arm/cpu/arm1136/mx31/timer.c
index c05a39d..717a2b7 100644
--- a/arch/arm/cpu/arm1136/mx31/timer.c
+++ b/arch/arm/cpu/arm1136/mx31/timer.c
@@ -173,8 +173,8 @@ void mxc_hw_watchdog_enable(void)
#else
secs = 64;
#endif
- writew(readw(&wdog->wcr) | (secs << WDOG_WT_SHIFT) | WDOG_ENABLE,
- &wdog->wcr);
+ setbits_le16(&wdog->wcr, (secs << WDOG_WT_SHIFT) | WDOG_ENABLE
+ | WDOG_WDZST);
}
diff --git a/arch/arm/cpu/arm926ejs/davinci/Makefile b/arch/arm/cpu/arm926ejs/davinci/Makefile
index 3183e6a..0310957 100644
--- a/arch/arm/cpu/arm926ejs/davinci/Makefile
+++ b/arch/arm/cpu/arm926ejs/davinci/Makefile
@@ -28,11 +28,12 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(SOC).o
COBJS-y += cpu.o timer.o psc.o
+COBJS-$(CONFIG_AM18018_LOWLEVEL) += am1808_lowlevel.o
COBJS-$(CONFIG_SOC_DM355) += dm355.o
COBJS-$(CONFIG_SOC_DM365) += dm365.o
COBJS-$(CONFIG_SOC_DM644X) += dm644x.o
COBJS-$(CONFIG_SOC_DM646X) += dm646x.o
-COBJS-$(CONFIG_DRIVER_TI_EMAC) += lxt972.o dp83848.o et1011c.o
+COBJS-$(CONFIG_DRIVER_TI_EMAC) += lxt972.o dp83848.o et1011c.o ksz8873.o
SOBJS = reset.o
diff --git a/arch/arm/cpu/arm926ejs/davinci/am1808_lowlevel.c b/arch/arm/cpu/arm926ejs/davinci/am1808_lowlevel.c
new file mode 100644
index 0000000..1ea4a9f
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/davinci/am1808_lowlevel.c
@@ -0,0 +1,428 @@
+/*
+ * SoC-specific lowlevel code for AM1808 and similar chips
+ *
+ * Copyright (C) 2011
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <common.h>
+#include <nand.h>
+#include <ns16550.h>
+#include <post.h>
+#include <asm/arch/am1808_lowlevel.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/ddr2_defs.h>
+#include <asm/arch/emif_defs.h>
+
+void am1808_waitloop(unsigned long loopcnt)
+{
+ unsigned long i;
+
+ for (i = 0; i < loopcnt; i++)
+ asm(" NOP");
+}
+
+int am1808_pll_init(struct davinci_pllc_regs *reg, unsigned long pllmult)
+{
+ if (reg == davinci_pllc0_regs)
+ /* Unlock PLL registers. */
+ clrbits_le32(&davinci_syscfg_regs->cfgchip0, 0x00000010);
+
+ /*
+ * Set PLLENSRC '0',bit 5, PLL Enable(PLLEN) selection is controlled
+ * through MMR
+ */
+ clrbits_le32(&reg->pllctl, 0x00000020);
+ /* PLLCTL.EXTCLKSRC bit 9 should be left at 0 for Freon */
+ clrbits_le32(&reg->pllctl, 0x00000200);
+
+ /* Set PLLEN=0 => PLL BYPASS MODE */
+ clrbits_le32(&reg->pllctl, 0x00000001);
+
+ am1808_waitloop(150);
+
+ if (reg == davinci_pllc0_regs) {
+ /*
+ * Select the Clock Mode bit 8 as External Clock or On Chip
+ * Oscilator
+ */
+ dv_maskbits(&reg->pllctl, 0xFFFFFEFF);
+ setbits_le32(&reg->pllctl, (CONFIG_SYS_DV_CLKMODE << 8));
+ }
+
+ /* Clear PLLRST bit to reset the PLL */
+ clrbits_le32(&reg->pllctl, 0x00000008);
+
+ /* Disable the PLL output */
+ setbits_le32(&reg->pllctl, 0x00000010);
+
+ /* PLL initialization sequence */
+ /*
+ * Power up the PLL- PWRDN bit set to 0 to bring the PLL out of
+ * power down bit
+ */
+ clrbits_le32(&reg->pllctl, 0x00000002);
+
+ /* Enable the PLL from Disable Mode PLLDIS bit to 0 */
+ clrbits_le32(&reg->pllctl, 0x00000010);
+
+ /* Program the required multiplier value in PLLM */
+ writel(pllmult, &reg->pllm);
+
+ /* program the postdiv */
+ if (reg == davinci_pllc0_regs)
+ writel((0x8000 | CONFIG_SYS_AM1808_PLL0_POSTDIV),
+ &reg->postdiv);
+ else
+ writel((0x8000 | CONFIG_SYS_AM1808_PLL1_POSTDIV),
+ &reg->postdiv);
+
+ /*
+ * Check for the GOSTAT bit in PLLSTAT to clear to 0 to indicate that
+ * no GO operation is currently in progress
+ */
+ while ((readl(&reg->pllstat) & 0x1) == 1)
+ ;
+
+ if (reg == davinci_pllc0_regs) {
+ writel(CONFIG_SYS_AM1808_PLL0_PLLDIV1, &reg->plldiv1);
+ writel(CONFIG_SYS_AM1808_PLL0_PLLDIV2, &reg->plldiv2);
+ writel(CONFIG_SYS_AM1808_PLL0_PLLDIV3, &reg->plldiv3);
+ writel(CONFIG_SYS_AM1808_PLL0_PLLDIV4, &reg->plldiv4);
+ writel(CONFIG_SYS_AM1808_PLL0_PLLDIV5, &reg->plldiv5);
+ writel(CONFIG_SYS_AM1808_PLL0_PLLDIV6, &reg->plldiv6);
+ writel(CONFIG_SYS_AM1808_PLL0_PLLDIV7, &reg->plldiv7);
+ } else {
+ writel(CONFIG_SYS_AM1808_PLL1_PLLDIV1, &reg->plldiv1);
+ writel(CONFIG_SYS_AM1808_PLL1_PLLDIV2, &reg->plldiv2);
+ writel(CONFIG_SYS_AM1808_PLL1_PLLDIV3, &reg->plldiv3);
+ }
+
+ /*
+ * Set the GOSET bit in PLLCMD to 1 to initiate a new divider
+ * transition.
+ */
+ setbits_le32(&reg->pllcmd, 0x01);
+
+ /*
+ * Wait for the GOSTAT bit in PLLSTAT to clear to 0
+ * (completion of phase alignment).
+ */
+ while ((readl(&reg->pllstat) & 0x1) == 1)
+ ;
+
+ /* Wait for PLL to reset properly. See PLL spec for PLL reset time */
+ am1808_waitloop(200);
+
+ /* Set the PLLRST bit in PLLCTL to 1 to bring the PLL out of reset */
+ setbits_le32(&reg->pllctl, 0x00000008);
+
+ /* Wait for PLL to lock. See PLL spec for PLL lock time */
+ am1808_waitloop(2400);
+
+ /*
+ * Set the PLLEN bit in PLLCTL to 1 to remove the PLL from bypass
+ * mode
+ */
+ setbits_le32(&reg->pllctl, 0x00000001);
+
+
+ /*
+ * clear EMIFA and EMIFB clock source settings, let them
+ * run off SYSCLK
+ */
+ if (reg == davinci_pllc0_regs)
+ dv_maskbits(&davinci_syscfg_regs->cfgchip3, 0xFFFFFFF8);
+
+ return 0;
+}
+
+void am1808_lpc_transition(unsigned char pscnum, unsigned char module,
+ unsigned char domain, unsigned char state)
+{
+ struct davinci_psc_regs *reg;
+ dv_reg_p mdstat, mdctl;
+
+ if (pscnum == 0) {
+ reg = davinci_psc0_regs;
+ mdstat = &reg->psc0.mdstat[module];
+ mdctl = &reg->psc0.mdctl[module];
+ } else {
+ reg = davinci_psc1_regs;
+ mdstat = &reg->psc1.mdstat[module];
+ mdctl = &reg->psc1.mdctl[module];
+ }
+
+ /* Wait for any outstanding transition to complete */
+ while ((readl(&reg->ptstat) & (0x00000001 << domain)))
+ ;
+
+ /* If we are already in that state, just return */
+ if ((readl(mdstat) & 0x1F) == state)
+ return;
+
+ /* Perform transition */
+ writel((readl(mdctl) & 0xFFFFFFE0) | state, mdctl);
+ setbits_le32(&reg->ptcmd, (0x00000001 << domain));
+
+ /* Wait for transition to complete */
+ while (readl(&reg->ptstat) & (0x00000001 << domain))
+ ;
+
+ /* Wait and verify the state */
+ while ((readl(mdstat) & 0x1F) != state)
+ ;
+}
+
+int am1808_ddr_setup(unsigned int freq)
+{
+ unsigned long tmp;
+
+ /* Enable the Clock to DDR2/mDDR */
+ am1808_lpc_transition(1, 6, 0, PSC_ENABLE);
+
+ tmp = readl(&davinci_syscfg1_regs->vtpio_ctl);
+ if ((tmp & VTP_POWERDWN) == VTP_POWERDWN) {
+ /* Begin VTP Calibration */
+ clrbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_POWERDWN);
+ clrbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_LOCK);
+ setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_CLKRZ);
+ clrbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_CLKRZ);
+ setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_CLKRZ);
+
+ /* Polling READY bit to see when VTP calibration is done */
+ tmp = readl(&davinci_syscfg1_regs->vtpio_ctl);
+ while ((tmp & VTP_READY) != VTP_READY)
+ tmp = readl(&davinci_syscfg1_regs->vtpio_ctl);
+
+ setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_LOCK);
+ setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_POWERDWN);
+
+ setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_IOPWRDWN);
+ }
+
+ writel(CONFIG_SYS_AM1808_DDR2_DDRPHYCR, &dv_ddr2_regs_ctrl->ddrphycr);
+ clrbits_le32(&davinci_syscfg1_regs->ddr_slew,
+ (1 << DDR_SLEW_CMOSEN_BIT));
+
+ setbits_le32(&dv_ddr2_regs_ctrl->sdbcr, DV_DDR_BOOTUNLOCK);
+
+ writel((CONFIG_SYS_AM1808_DDR2_SDBCR & ~0xf0000000) |
+ (readl(&dv_ddr2_regs_ctrl->sdbcr) & 0xf0000000), /*rsv Bytes*/
+ &dv_ddr2_regs_ctrl->sdbcr);
+ writel(CONFIG_SYS_AM1808_DDR2_SDBCR2, &dv_ddr2_regs_ctrl->sdbcr2);
+
+ writel(CONFIG_SYS_AM1808_DDR2_SDTIMR, &dv_ddr2_regs_ctrl->sdtimr);
+ writel(CONFIG_SYS_AM1808_DDR2_SDTIMR2, &dv_ddr2_regs_ctrl->sdtimr2);
+
+ clrbits_le32(&dv_ddr2_regs_ctrl->sdbcr,
+ (1 << DV_DDR_SDCR_TIMUNLOCK_SHIFT));
+
+ /*
+ * LPMODEN and MCLKSTOPEN must be set!
+ * Without this bits set, PSC don;t switch states !!
+ */
+ writel(CONFIG_SYS_AM1808_DDR2_SDRCR |
+ (1 << DV_DDR_SRCR_LPMODEN_SHIFT) |
+ (1 << DV_DDR_SRCR_MCLKSTOPEN_SHIFT),
+ &dv_ddr2_regs_ctrl->sdrcr);
+
+ /* SyncReset the Clock to EMIF3A SDRAM */
+ am1808_lpc_transition(1, 6, 0, PSC_SYNCRESET);
+ /* Enable the Clock to EMIF3A SDRAM */
+ am1808_lpc_transition(1, 6, 0, PSC_ENABLE);
+
+ /* disable self refresh */
+ clrbits_le32(&dv_ddr2_regs_ctrl->sdrcr, 0xc0000000);
+ writel(0x30, &dv_ddr2_regs_ctrl->pbbpr);
+
+ return 0;
+}
+
+static void am1808_set_mdctl(dv_reg_p mdctl)
+{
+ if ((readl(mdctl) & 0x1F) != PSC_ENABLE)
+ writel(((readl(mdctl) & 0xFFFFFFE0) | PSC_ENABLE), mdctl);
+}
+
+void am1808_psc_init(void)
+{
+ struct davinci_psc_regs *reg;
+ int i;
+
+ /* PSC 0 domain 0 init */
+ reg = davinci_psc0_regs;
+ while ((readl(&reg->ptstat) & 0x00000001))
+ ;
+
+ for (i = 3; i <= 4 ; i++)
+ am1808_set_mdctl(&reg->psc0.mdctl[i]);
+
+ for (i = 7; i <= 12 ; i++)
+ am1808_set_mdctl(&reg->psc0.mdctl[i]);
+
+ /* Do Always-On Power Domain Transitions */
+ setbits_le32(&reg->ptcmd, 0x00000001);
+ while (readl(&reg->ptstat) & 0x00000001)
+ ;
+
+ /* PSC1, domain 1 init */
+ reg = davinci_psc1_regs;
+ while ((readl(&reg->ptstat) & 0x00000001))
+ ;
+
+ am1808_set_mdctl(&reg->psc1.mdctl[3]);
+ am1808_set_mdctl(&reg->psc1.mdctl[6]);
+
+ /* UART1 + UART2 */
+ for (i = 12 ; i <= 13 ; i++)
+ am1808_set_mdctl(&reg->psc1.mdctl[i]);
+
+ am1808_set_mdctl(&reg->psc1.mdctl[26]);
+ am1808_set_mdctl(&reg->psc1.mdctl[31]);
+
+ /* Do Always-On Power Domain Transitions */
+ setbits_le32(&reg->ptcmd, 0x00000001);
+ while (readl(&reg->ptstat) & 0x00000001)
+ ;
+}
+
+void am1808_pinmux_ctl(unsigned long offset, unsigned long mask,
+ unsigned long value)
+{
+ clrbits_le32(&davinci_syscfg_regs->pinmux[offset], mask);
+ setbits_le32(&davinci_syscfg_regs->pinmux[offset], (mask & value));
+}
+
+__attribute__((weak))
+void board_gpio_init(void)
+{
+ return;
+}
+
+#if defined(CONFIG_NAND_SPL)
+void nand_boot(void)
+{
+ __attribute__((noreturn)) void (*uboot)(void);
+
+ /* copy image from NOR to RAM */
+ memcpy((void *)CONFIG_SYS_NAND_U_BOOT_DST,
+ (void *)CONFIG_SYS_NAND_U_BOOT_OFFS,
+ CONFIG_SYS_NAND_U_BOOT_SIZE);
+
+ /* and jump to it ... */
+ uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START;
+ (*uboot)();
+}
+#endif
+
+#if defined(CONFIG_NAND_SPL)
+void board_init_f(ulong bootflag)
+#else
+int arch_cpu_init(void)
+#endif
+{
+ /*
+ * copied from arch/arm/cpu/arm926ejs/start.S
+ *
+ * flush v4 I/D caches
+ */
+ asm("mov r0, #0");
+ asm("mcr p15, 0, r0, c7, c7, 0"); /* flush v3/v4 cache */
+ asm("mcr p15, 0, r0, c8, c7, 0"); /* flush v4 TLB */
+
+ /*
+ * disable MMU stuff and caches
+ */
+ asm("mrc p15, 0, r0, c1, c0, 0");
+ /* clear bits 13, 9:8 (--V- --RS) */
+ asm("bic r0, r0, #0x00002300");
+ /* clear bits 7, 2:0 (B--- -CAM) */
+ asm("bic r0, r0, #0x00000087");
+ /* set bit 2 (A) Align */
+ asm("orr r0, r0, #0x00000002");
+ /* set bit 12 (I) I-Cache */
+ asm("orr r0, r0, #0x00001000");
+ asm("mcr p15, 0, r0, c1, c0, 0");
+
+ /* Unlock kick registers */
+ writel(0x83e70b13, &davinci_syscfg_regs->kick0);
+ writel(0x95a4f1e0, &davinci_syscfg_regs->kick1);
+
+ dv_maskbits(&davinci_syscfg_regs->suspsrc,
+ ((1 << 27) | (1 << 22) | (1 << 20) | (1 << 5) | (1 << 16)));
+
+ /* System PSC setup - enable all */
+ am1808_psc_init();
+
+ /* Setup Pinmux */
+ am1808_pinmux_ctl(0, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX0);
+ am1808_pinmux_ctl(1, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX1);
+ am1808_pinmux_ctl(2, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX2);
+ am1808_pinmux_ctl(3, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX3);
+ am1808_pinmux_ctl(4, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX4);
+ am1808_pinmux_ctl(5, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX5);
+ am1808_pinmux_ctl(6, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX6);
+ am1808_pinmux_ctl(7, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX7);
+ am1808_pinmux_ctl(8, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX8);
+ am1808_pinmux_ctl(9, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX9);
+ am1808_pinmux_ctl(10, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX10);
+ am1808_pinmux_ctl(11, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX11);
+ am1808_pinmux_ctl(12, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX12);
+ am1808_pinmux_ctl(13, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX13);
+ am1808_pinmux_ctl(14, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX14);
+ am1808_pinmux_ctl(15, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX15);
+ am1808_pinmux_ctl(16, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX16);
+ am1808_pinmux_ctl(17, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX17);
+ am1808_pinmux_ctl(18, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX18);
+ am1808_pinmux_ctl(19, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX19);
+
+ /* PLL setup */
+ am1808_pll_init(davinci_pllc0_regs, CONFIG_SYS_AM1808_PLL0_PLLM);
+ am1808_pll_init(davinci_pllc1_regs, CONFIG_SYS_AM1808_PLL1_PLLM);
+
+ /* GPIO setup */
+ board_gpio_init();
+
+ /* setup CSn config */
+ writel(CONFIG_SYS_AM1808_CS2CFG, &davinci_emif_regs->ab1cr);
+ writel(CONFIG_SYS_AM1808_CS3CFG, &davinci_emif_regs->ab2cr);
+
+ am1808_lpc_transition(1, 13, 0, PSC_ENABLE);
+ NS16550_init((NS16550_t)(CONFIG_SYS_NS16550_COM1),
+ CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE);
+
+ /*
+ * Fix Power and Emulation Management Register
+ * see sprufw3a.pdf page 37 Table 24
+ */
+ writel(readl((CONFIG_SYS_NS16550_COM1 + 0x30)) | 0x00006001,
+ (CONFIG_SYS_NS16550_COM1 + 0x30));
+#if defined(CONFIG_NAND_SPL)
+ puts("ddr init\n");
+ am1808_ddr_setup(132);
+
+ puts("boot u-boot ...\n");
+
+ nand_boot();
+#else
+ am1808_ddr_setup(132);
+ return 0;
+#endif
+}
diff --git a/arch/arm/cpu/arm926ejs/davinci/cpu.c b/arch/arm/cpu/arm926ejs/davinci/cpu.c
index b705dfd..02819f6 100644
--- a/arch/arm/cpu/arm926ejs/davinci/cpu.c
+++ b/arch/arm/cpu/arm926ejs/davinci/cpu.c
@@ -115,7 +115,18 @@ int clk_get(enum davinci_clk_ids id)
out:
return pll_out;
}
-#endif /* CONFIG_SOC_DA8XX */
+#ifdef CONFIG_DISPLAY_CPUINFO
+int print_cpuinfo(void)
+{
+ printf("Cores: ARM %d MHz",
+ clk_get(DAVINCI_ARM_CLKID) / 1000000);
+ printf("\nDDR: %d MHz\n",
+ /* DDR PHY uses an x2 input clock */
+ clk_get(0x10001) / 1000000);
+ return 0;
+}
+#endif
+#else /* CONFIG_SOC_DA8XX */
#ifdef CONFIG_DISPLAY_CPUINFO
@@ -194,7 +205,8 @@ unsigned int davinci_arm_clk_get()
return pll_sysclk_mhz(DAVINCI_PLL_CNTRL0_BASE, ARM_PLLDIV) * 1000000;
}
#endif
-#endif
+#endif /* CONFIG_DISPLAY_CPUINFO */
+#endif /* !CONFIG_SOC_DA8XX */
/*
* Initializes on-chip ethernet controllers.
diff --git a/arch/arm/cpu/arm926ejs/davinci/ksz8873.c b/arch/arm/cpu/arm926ejs/davinci/ksz8873.c
new file mode 100644
index 0000000..634eda0
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/davinci/ksz8873.c
@@ -0,0 +1,68 @@
+/*
+ * Micrel KSZ8873 PHY Driver for TI DaVinci
+ * (TMS320DM644x) based boards.
+ *
+ * Copyright (C) 2011 Heiko Schocher <hsdenx.de>
+ *
+ * based on:
+ * National Semiconductor DP83848 PHY Driver for TI DaVinci
+ * (TMS320DM644x) based boards.
+ *
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * --------------------------------------------------------
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <miiphy.h>
+#include <net.h>
+#include <asm/arch/emac_defs.h>
+#include <asm/io.h>
+
+int ksz8873_is_phy_connected(int phy_addr)
+{
+ u_int16_t dummy;
+
+ return davinci_eth_phy_read(phy_addr, MII_PHYSID1, &dummy);
+}
+
+int ksz8873_get_link_speed(int phy_addr)
+{
+ emac_regs *emac = (emac_regs *)EMAC_BASE_ADDR;
+
+ /* we always have a link to the switch, 100 FD */
+ writel((EMAC_MACCONTROL_MIIEN_ENABLE |
+ EMAC_MACCONTROL_FULLDUPLEX_ENABLE),
+ &emac->MACCONTROL);
+ return 1;
+}
+
+
+int ksz8873_init_phy(int phy_addr)
+{
+ return 1;
+}
+
+
+int ksz8873_auto_negotiate(int phy_addr)
+{
+ return dp83848_get_link_speed(phy_addr);
+}
diff --git a/arch/arm/cpu/arm926ejs/davinci/timer.c b/arch/arm/cpu/arm926ejs/davinci/timer.c
index 8b1734c..c7bf7a5 100644
--- a/arch/arm/cpu/arm926ejs/davinci/timer.c
+++ b/arch/arm/cpu/arm926ejs/davinci/timer.c
@@ -39,23 +39,10 @@
#include <common.h>
#include <asm/io.h>
+#include <asm/arch/timer_defs.h>
DECLARE_GLOBAL_DATA_PTR;
-struct davinci_timer {
- u_int32_t pid12;
- u_int32_t emumgt;
- u_int32_t na1;
- u_int32_t na2;
- u_int32_t tim12;
- u_int32_t tim34;
- u_int32_t prd12;
- u_int32_t prd34;
- u_int32_t tcr;
- u_int32_t tgcr;
- u_int32_t wdtcr;
-};
-
static struct davinci_timer * const timer =
(struct davinci_timer *)CONFIG_SYS_TIMERBASE;
@@ -121,3 +108,34 @@ ulong get_tbclk(void)
{
return CONFIG_SYS_HZ;
}
+
+#ifdef CONFIG_HW_WATCHDOG
+static struct davinci_timer * const wdttimer =
+ (struct davinci_timer *)CONFIG_SYS_WDTTIMERBASE;
+
+/*
+ * See prufw2.pdf for using Timer as a WDT
+ */
+void davinci_hw_watchdog_enable(void)
+{
+ writel(0x0, &wdttimer->tcr);
+ writel(0x0, &wdttimer->tgcr);
+ /* TIMMODE = 2h */
+ writel(0x08 | 0x03 | ((TIM_CLK_DIV - 1) << 8), &wdttimer->tgcr);
+ writel(CONFIG_SYS_WDT_PERIOD_LOW, &wdttimer->prd12);
+ writel(CONFIG_SYS_WDT_PERIOD_HIGH, &wdttimer->prd34);
+ writel(2 << 22, &wdttimer->tcr);
+ writel(0x0, &wdttimer->tim12);
+ writel(0x0, &wdttimer->tim34);
+ /* set WDEN bit, WDKEY 0xa5c6 */
+ writel(0xa5c64000, &wdttimer->wdtcr);
+ /* clear counter register */
+ writel(0xda7e4000, &wdttimer->wdtcr);
+}
+
+void davinci_hw_watchdog_reset(void)
+{
+ writel(0xa5c64000, &wdttimer->wdtcr);
+ writel(0xda7e4000, &wdttimer->wdtcr);
+}
+#endif
diff --git a/arch/arm/cpu/arm926ejs/mx25/generic.c b/arch/arm/cpu/arm926ejs/mx25/generic.c
index 76e4b5c..8e60a26 100644
--- a/arch/arm/cpu/arm926ejs/mx25/generic.c
+++ b/arch/arm/cpu/arm926ejs/mx25/generic.c
@@ -105,13 +105,64 @@ ulong imx_get_perclk (int clk)
return lldiv (fref, div);
}
+u32 get_cpu_rev(void)
+{
+ u32 srev;
+ u32 system_rev = 0x25000;
+
+ /* read SREV register from IIM module */
+ struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE;
+ srev = readl(&iim->iim_srev);
+
+ switch (srev) {
+ case 0x00:
+ system_rev |= CHIP_REV_1_0;
+ break;
+ case 0x01:
+ system_rev |= CHIP_REV_1_1;
+ break;
+ default:
+ system_rev |= 0x8000;
+ break;
+ }
+
+ return system_rev;
+}
+
#if defined(CONFIG_DISPLAY_CPUINFO)
+static char *get_reset_cause(void)
+{
+ /* read RCSR register from CCM module */
+ struct ccm_regs *ccm =
+ (struct ccm_regs *)IMX_CCM_BASE;
+
+ u32 cause = readl(&ccm->rcsr) & 0x0f;
+
+ if (cause == 0)
+ return "POR";
+ else if (cause == 1)
+ return "RST";
+ else if ((cause & 2) == 2)
+ return "WDOG";
+ else if ((cause & 4) == 4)
+ return "SW RESET";
+ else if ((cause & 8) == 8)
+ return "JTAG";
+ else
+ return "unknown reset";
+
+}
+
int print_cpuinfo (void)
{
char buf[32];
+ u32 cpurev = get_cpu_rev();
- printf ("CPU: Freescale i.MX25 at %s MHz\n\n",
+ printf("CPU: Freescale i.MX25 rev%d.%d%s at %s MHz\n",
+ (cpurev & 0xF0) >> 4, (cpurev & 0x0F),
+ ((cpurev & 0x8000) ? " unknown" : ""),
strmhz (buf, imx_get_armclk ()));
+ printf("Reset cause: %s\n\n", get_reset_cause());
return 0;
}
#endif
diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S
index d164d6d..5e30745 100644
--- a/arch/arm/cpu/arm926ejs/start.S
+++ b/arch/arm/cpu/arm926ejs/start.S
@@ -51,9 +51,18 @@
*/
+#ifdef CONFIG_SYS_DV_NOR_BOOT_CFG
.globl _start
_start:
+.globl _NOR_BOOT_CFG
+_NOR_BOOT_CFG:
+ .word CONFIG_SYS_DV_NOR_BOOT_CFG
b reset
+#else
+.globl _start
+_start:
+ b reset
+#endif
#ifdef CONFIG_SPL_BUILD
/* No exception handlers in preloader */
ldr pc, _hang
diff --git a/arch/arm/cpu/armv7/mx5/clock.c b/arch/arm/cpu/armv7/mx5/clock.c
index 00610a0..0769a64 100644
--- a/arch/arm/cpu/armv7/mx5/clock.c
+++ b/arch/arm/cpu/armv7/mx5/clock.c
@@ -29,11 +29,13 @@
#include <asm/arch/imx-regs.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/clock.h>
+#include <div64.h>
enum pll_clocks {
PLL1_CLOCK = 0,
PLL2_CLOCK,
PLL3_CLOCK,
+ PLL4_CLOCK,
PLL_CLOCKS,
};
@@ -41,25 +43,65 @@ struct mxc_pll_reg *mxc_plls[PLL_CLOCKS] = {
[PLL1_CLOCK] = (struct mxc_pll_reg *)PLL1_BASE_ADDR,
[PLL2_CLOCK] = (struct mxc_pll_reg *)PLL2_BASE_ADDR,
[PLL3_CLOCK] = (struct mxc_pll_reg *)PLL3_BASE_ADDR,
+#ifdef CONFIG_MX53
+ [PLL4_CLOCK] = (struct mxc_pll_reg *)PLL4_BASE_ADDR,
+#endif
};
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)MXC_CCM_BASE;
/*
- * Calculate the frequency of this pll.
+ * Calculate the frequency of PLLn.
*/
-static u32 decode_pll(struct mxc_pll_reg *pll, u32 infreq)
+static uint32_t decode_pll(struct mxc_pll_reg *pll, uint32_t infreq)
{
- u32 mfi, mfn, mfd, pd;
+ uint32_t ctrl, op, mfd, mfn, mfi, pdf, ret;
+ uint64_t refclk, temp;
+ int32_t mfn_abs;
+
+ ctrl = readl(&pll->ctrl);
+
+ if (ctrl & MXC_DPLLC_CTL_HFSM) {
+ mfn = __raw_readl(&pll->hfs_mfn);
+ mfd = __raw_readl(&pll->hfs_mfd);
+ op = __raw_readl(&pll->hfs_op);
+ } else {
+ mfn = __raw_readl(&pll->mfn);
+ mfd = __raw_readl(&pll->mfd);
+ op = __raw_readl(&pll->op);
+ }
- mfn = __raw_readl(&pll->mfn);
- mfd = __raw_readl(&pll->mfd) + 1;
- mfi = __raw_readl(&pll->op);
- pd = (mfi & 0xF) + 1;
- mfi = (mfi >> 4) & 0xF;
- mfi = (mfi >= 5) ? mfi : 5;
+ mfd &= MXC_DPLLC_MFD_MFD_MASK;
+ mfn &= MXC_DPLLC_MFN_MFN_MASK;
+ pdf = op & MXC_DPLLC_OP_PDF_MASK;
+ mfi = (op & MXC_DPLLC_OP_MFI_MASK) >> MXC_DPLLC_OP_MFI_OFFSET;
+
+ /* 21.2.3 */
+ if (mfi < 5)
+ mfi = 5;
+
+ /* Sign extend */
+ if (mfn >= 0x04000000) {
+ mfn |= 0xfc000000;
+ mfn_abs = -mfn;
+ } else
+ mfn_abs = mfn;
+
+ refclk = infreq * 2;
+ if (ctrl & MXC_DPLLC_CTL_DPDCK0_2_EN)
+ refclk *= 2;
+
+ refclk /= pdf + 1;
+ temp = refclk * mfn_abs;
+ do_div(temp, mfd + 1);
+ ret = refclk * mfi;
+
+ if ((int)mfn < 0)
+ ret -= temp;
+ else
+ ret += temp;
- return ((4 * (infreq / 1000) * (mfi * mfd + mfn)) / (mfd * pd)) * 1000;
+ return ret;
}
/*
@@ -99,18 +141,35 @@ static u32 get_periph_clk(void)
}
/*
+ * Get the rate of ahb clock.
+ */
+static u32 get_ahb_clk(void)
+{
+ uint32_t freq, div, reg;
+
+ freq = get_periph_clk();
+
+ reg = __raw_readl(&mxc_ccm->cbcdr);
+ div = ((reg & MXC_CCM_CBCDR_AHB_PODF_MASK) >>
+ MXC_CCM_CBCDR_AHB_PODF_OFFSET) + 1;
+
+ return freq / div;
+}
+
+/*
* Get the rate of ipg clock.
*/
static u32 get_ipg_clk(void)
{
- u32 ahb_podf, ipg_podf;
-
- ahb_podf = __raw_readl(&mxc_ccm->cbcdr);
- ipg_podf = (ahb_podf & MXC_CCM_CBCDR_IPG_PODF_MASK) >>
- MXC_CCM_CBCDR_IPG_PODF_OFFSET;
- ahb_podf = (ahb_podf & MXC_CCM_CBCDR_AHB_PODF_MASK) >>
- MXC_CCM_CBCDR_AHB_PODF_OFFSET;
- return get_periph_clk() / ((ahb_podf + 1) * (ipg_podf + 1));
+ uint32_t freq, reg, div;
+
+ freq = get_ahb_clk();
+
+ reg = __raw_readl(&mxc_ccm->cbcdr);
+ div = ((reg & MXC_CCM_CBCDR_IPG_PODF_MASK) >>
+ MXC_CCM_CBCDR_IPG_PODF_OFFSET) + 1;
+
+ return freq / div;
}
/*
@@ -237,7 +296,7 @@ unsigned int mxc_get_clock(enum mxc_clock clk)
case MXC_ARM_CLK:
return get_mcu_main_clk();
case MXC_AHB_CLK:
- break;
+ return get_ahb_clk();
case MXC_IPG_CLK:
return get_ipg_clk();
case MXC_IPG_PERCLK:
@@ -274,13 +333,20 @@ int do_mx5_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
u32 freq;
freq = decode_pll(mxc_plls[PLL1_CLOCK], CONFIG_SYS_MX5_HCLK);
- printf("pll1: %dMHz\n", freq / 1000000);
+ printf("PLL1 %8d MHz\n", freq / 1000000);
freq = decode_pll(mxc_plls[PLL2_CLOCK], CONFIG_SYS_MX5_HCLK);
- printf("pll2: %dMHz\n", freq / 1000000);
+ printf("PLL2 %8d MHz\n", freq / 1000000);
freq = decode_pll(mxc_plls[PLL3_CLOCK], CONFIG_SYS_MX5_HCLK);
- printf("pll3: %dMHz\n", freq / 1000000);
- printf("ipg clock : %dHz\n", mxc_get_clock(MXC_IPG_CLK));
- printf("ipg per clock : %dHz\n", mxc_get_clock(MXC_IPG_PERCLK));
+ printf("PLL3 %8d MHz\n", freq / 1000000);
+#ifdef CONFIG_MX53
+ freq = decode_pll(mxc_plls[PLL4_CLOCK], CONFIG_SYS_MX5_HCLK);
+ printf("PLL4 %8d MHz\n", freq / 1000000);
+#endif
+
+ printf("\n");
+ printf("AHB %8d kHz\n", mxc_get_clock(MXC_AHB_CLK) / 1000);
+ printf("IPG %8d kHz\n", mxc_get_clock(MXC_IPG_CLK) / 1000);
+ printf("IPG PERCLK %8d kHz\n", mxc_get_clock(MXC_IPG_PERCLK) / 1000);
return 0;
}
diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile
index ea9f8ec..0b96b47 100644
--- a/arch/arm/cpu/armv7/omap-common/Makefile
+++ b/arch/arm/cpu/armv7/omap-common/Makefile
@@ -33,6 +33,12 @@ COBJS += gpio.o
ifdef CONFIG_SPL_BUILD
COBJS += spl.o
+ifdef CONFIG_SPL_NAND_SUPPORT
+COBJS += spl_nand.o
+endif
+ifdef CONFIG_SPL_MMC_SUPPORT
+COBJS += spl_mmc.o
+endif
endif
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
diff --git a/arch/arm/cpu/armv7/omap-common/spl.c b/arch/arm/cpu/armv7/omap-common/spl.c
index d177652..c76fea6 100644
--- a/arch/arm/cpu/armv7/omap-common/spl.c
+++ b/arch/arm/cpu/armv7/omap-common/spl.c
@@ -26,6 +26,7 @@
#include <asm/u-boot.h>
#include <asm/utils.h>
#include <asm/arch/sys_proto.h>
+#include <nand.h>
#include <mmc.h>
#include <fat.h>
#include <timestamp_autogenerated.h>
@@ -37,14 +38,11 @@
DECLARE_GLOBAL_DATA_PTR;
+struct spl_image_info spl_image;
+
/* Define global data structure pointer to it*/
static gd_t gdata __attribute__ ((section(".data")));
static bd_t bdata __attribute__ ((section(".data")));
-static const char *image_name;
-static u8 image_os;
-static u32 image_load_addr;
-static u32 image_entry_point;
-static u32 image_size;
inline void hang(void)
{
@@ -65,154 +63,40 @@ void board_init_f(ulong dummy)
relocate_code(CONFIG_SPL_STACK, &gdata, CONFIG_SPL_TEXT_BASE);
}
-#ifdef CONFIG_GENERIC_MMC
-int board_mmc_init(bd_t *bis)
-{
- switch (omap_boot_device()) {
- case BOOT_DEVICE_MMC1:
- omap_mmc_init(0);
- break;
- case BOOT_DEVICE_MMC2:
- omap_mmc_init(1);
- break;
- }
- return 0;
-}
-#endif
-
-static void parse_image_header(const struct image_header *header)
+void spl_parse_image_header(const struct image_header *header)
{
u32 header_size = sizeof(struct image_header);
if (__be32_to_cpu(header->ih_magic) == IH_MAGIC) {
- image_size = __be32_to_cpu(header->ih_size) + header_size;
- image_entry_point = __be32_to_cpu(header->ih_load);
+ spl_image.size = __be32_to_cpu(header->ih_size) + header_size;
+ spl_image.entry_point = __be32_to_cpu(header->ih_load);
/* Load including the header */
- image_load_addr = image_entry_point - header_size;
- image_os = header->ih_os;
- image_name = (const char *)&header->ih_name;
+ spl_image.load_addr = spl_image.entry_point - header_size;
+ spl_image.os = header->ih_os;
+ spl_image.name = (const char *)&header->ih_name;
debug("spl: payload image: %s load addr: 0x%x size: %d\n",
- image_name, image_load_addr, image_size);
+ spl_image.name, spl_image.load_addr, spl_image.size);
} else {
/* Signature not found - assume u-boot.bin */
printf("mkimage signature not found - ih_magic = %x\n",
header->ih_magic);
puts("Assuming u-boot.bin ..\n");
/* Let's assume U-Boot will not be more than 200 KB */
- image_size = 200 * 1024;
- image_entry_point = CONFIG_SYS_TEXT_BASE;
- image_load_addr = CONFIG_SYS_TEXT_BASE;
- image_os = IH_OS_U_BOOT;
- image_name = "U-Boot";
- }
-}
-
-static void mmc_load_image_raw(struct mmc *mmc)
-{
- u32 image_size_sectors, err;
- const struct image_header *header;
-
- header = (struct image_header *)(CONFIG_SYS_TEXT_BASE -
- sizeof(struct image_header));
-
- /* read image header to find the image size & load address */
- err = mmc->block_dev.block_read(0,
- CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR, 1,
- (void *)header);
-
- if (err <= 0)
- goto end;
-
- parse_image_header(header);
-
- /* convert size to sectors - round up */
- image_size_sectors = (image_size + MMCSD_SECTOR_SIZE - 1) /
- MMCSD_SECTOR_SIZE;
-
- /* Read the header too to avoid extra memcpy */
- err = mmc->block_dev.block_read(0,
- CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR,
- image_size_sectors, (void *)image_load_addr);
-
-end:
- if (err <= 0) {
- printf("spl: mmc blk read err - %d\n", err);
- hang();
+ spl_image.size = 200 * 1024;
+ spl_image.entry_point = CONFIG_SYS_TEXT_BASE;
+ spl_image.load_addr = CONFIG_SYS_TEXT_BASE;
+ spl_image.os = IH_OS_U_BOOT;
+ spl_image.name = "U-Boot";
}
}
-static void mmc_load_image_fat(struct mmc *mmc)
-{
- s32 err;
- struct image_header *header;
-
- header = (struct image_header *)(CONFIG_SYS_TEXT_BASE -
- sizeof(struct image_header));
-
- err = fat_register_device(&mmc->block_dev,
- CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION);
- if (err) {
- printf("spl: fat register err - %d\n", err);
- hang();
- }
-
- err = file_fat_read(CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME,
- (u8 *)header, sizeof(struct image_header));
- if (err <= 0)
- goto end;
-
- parse_image_header(header);
-
- err = file_fat_read(CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME,
- (u8 *)image_load_addr, 0);
-
-end:
- if (err <= 0) {
- printf("spl: error reading image %s, err - %d\n",
- CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME, err);
- hang();
- }
-}
-
-static void mmc_load_image(void)
-{
- struct mmc *mmc;
- int err;
- u32 boot_mode;
-
- mmc_initialize(gd->bd);
- /* We register only one device. So, the dev id is always 0 */
- mmc = find_mmc_device(0);
- if (!mmc) {
- puts("spl: mmc device not found!!\n");
- hang();
- }
-
- err = mmc_init(mmc);
- if (err) {
- printf("spl: mmc init failed: err - %d\n", err);
- hang();
- }
-
- boot_mode = omap_boot_mode();
- if (boot_mode == MMCSD_MODE_RAW) {
- debug("boot mode - RAW\n");
- mmc_load_image_raw(mmc);
- } else if (boot_mode == MMCSD_MODE_FAT) {
- debug("boot mode - FAT\n");
- mmc_load_image_fat(mmc);
- } else {
- puts("spl: wrong MMC boot mode\n");
- hang();
- }
-}
-
-void jump_to_image_no_args(void)
+static void jump_to_image_no_args(void)
{
typedef void (*image_entry_noargs_t)(void)__attribute__ ((noreturn));
image_entry_noargs_t image_entry =
- (image_entry_noargs_t) image_entry_point;
+ (image_entry_noargs_t) spl_image.entry_point;
+ debug("image entry point: 0x%X\n", spl_image.entry_point);
image_entry();
}
@@ -228,17 +112,24 @@ void board_init_r(gd_t *id, ulong dummy)
boot_device = omap_boot_device();
debug("boot device - %d\n", boot_device);
switch (boot_device) {
+#ifdef CONFIG_SPL_MMC_SUPPORT
case BOOT_DEVICE_MMC1:
case BOOT_DEVICE_MMC2:
- mmc_load_image();
+ spl_mmc_load_image();
break;
+#endif
+#ifdef CONFIG_SPL_NAND_SUPPORT
+ case BOOT_DEVICE_NAND:
+ spl_nand_load_image();
+ break;
+#endif
default:
printf("SPL: Un-supported Boot Device - %d!!!\n", boot_device);
hang();
break;
}
- switch (image_os) {
+ switch (spl_image.os) {
case IH_OS_U_BOOT:
debug("Jumping to U-Boot\n");
jump_to_image_no_args();
@@ -249,6 +140,7 @@ void board_init_r(gd_t *id, ulong dummy)
}
}
+/* This requires UART clocks to be enabled */
void preloader_console_init(void)
{
const char *u_boot_rev = U_BOOT_VERSION;
@@ -259,7 +151,6 @@ void preloader_console_init(void)
gd->flags |= GD_FLG_RELOC;
gd->baudrate = CONFIG_BAUDRATE;
- setup_clocks_for_console();
serial_init(); /* serial communications setup */
/* Avoid a second "U-Boot" coming from this string */
diff --git a/arch/arm/cpu/armv7/omap-common/spl_mmc.c b/arch/arm/cpu/armv7/omap-common/spl_mmc.c
new file mode 100644
index 0000000..1d1e50c
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap-common/spl_mmc.c
@@ -0,0 +1,150 @@
+/*
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Aneesh V <aneesh@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <asm/u-boot.h>
+#include <asm/utils.h>
+#include <asm/arch/sys_proto.h>
+#include <mmc.h>
+#include <fat.h>
+#include <timestamp_autogenerated.h>
+#include <version_autogenerated.h>
+#include <asm/omap_common.h>
+#include <asm/arch/mmc_host_def.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_GENERIC_MMC
+int board_mmc_init(bd_t *bis)
+{
+ switch (omap_boot_device()) {
+ case BOOT_DEVICE_MMC1:
+ omap_mmc_init(0);
+ break;
+ case BOOT_DEVICE_MMC2:
+ omap_mmc_init(1);
+ break;
+ }
+ return 0;
+}
+#endif
+
+static void mmc_load_image_raw(struct mmc *mmc)
+{
+ u32 image_size_sectors, err;
+ const struct image_header *header;
+
+ header = (struct image_header *)(CONFIG_SYS_TEXT_BASE -
+ sizeof(struct image_header));
+
+ /* read image header to find the image size & load address */
+ err = mmc->block_dev.block_read(0,
+ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR, 1,
+ (void *)header);
+
+ if (err <= 0)
+ goto end;
+
+ spl_parse_image_header(header);
+
+ /* convert size to sectors - round up */
+ image_size_sectors = (spl_image.size + MMCSD_SECTOR_SIZE - 1) /
+ MMCSD_SECTOR_SIZE;
+
+ /* Read the header too to avoid extra memcpy */
+ err = mmc->block_dev.block_read(0,
+ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR,
+ image_size_sectors, (void *)spl_image.load_addr);
+
+end:
+ if (err <= 0) {
+ printf("spl: mmc blk read err - %d\n", err);
+ hang();
+ }
+}
+
+static void mmc_load_image_fat(struct mmc *mmc)
+{
+ s32 err;
+ struct image_header *header;
+
+ header = (struct image_header *)(CONFIG_SYS_TEXT_BASE -
+ sizeof(struct image_header));
+
+ err = fat_register_device(&mmc->block_dev,
+ CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION);
+ if (err) {
+ printf("spl: fat register err - %d\n", err);
+ hang();
+ }
+
+ err = file_fat_read(CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME,
+ (u8 *)header, sizeof(struct image_header));
+ if (err <= 0)
+ goto end;
+
+ spl_parse_image_header(header);
+
+ err = file_fat_read(CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME,
+ (u8 *)spl_image.load_addr, 0);
+
+end:
+ if (err <= 0) {
+ printf("spl: error reading image %s, err - %d\n",
+ CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME, err);
+ hang();
+ }
+}
+
+void spl_mmc_load_image(void)
+{
+ struct mmc *mmc;
+ int err;
+ u32 boot_mode;
+
+ mmc_initialize(gd->bd);
+ /* We register only one device. So, the dev id is always 0 */
+ mmc = find_mmc_device(0);
+ if (!mmc) {
+ puts("spl: mmc device not found!!\n");
+ hang();
+ }
+
+ err = mmc_init(mmc);
+ if (err) {
+ printf("spl: mmc init failed: err - %d\n", err);
+ hang();
+ }
+ boot_mode = omap_boot_mode();
+ if (boot_mode == MMCSD_MODE_RAW) {
+ debug("boot mode - RAW\n");
+ mmc_load_image_raw(mmc);
+ } else if (boot_mode == MMCSD_MODE_FAT) {
+ debug("boot mode - FAT\n");
+ mmc_load_image_fat(mmc);
+ } else {
+ puts("spl: wrong MMC boot mode\n");
+ hang();
+ }
+}
diff --git a/arch/arm/cpu/armv7/omap-common/spl_nand.c b/arch/arm/cpu/armv7/omap-common/spl_nand.c
new file mode 100644
index 0000000..af02a59
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap-common/spl_nand.c
@@ -0,0 +1,71 @@
+/*
+ * Copyright (C) 2011
+ * Corscience GmbH & Co. KG - Simon Schwarz <schwarz@corscience.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <asm/u-boot.h>
+#include <asm/utils.h>
+#include <asm/arch/sys_proto.h>
+#include <nand.h>
+#include <timestamp_autogenerated.h>
+#include <version_autogenerated.h>
+#include <asm/omap_common.h>
+
+
+void spl_nand_load_image(void)
+{
+ struct image_header *header;
+ switch (omap_boot_mode()) {
+ case NAND_MODE_HW_ECC:
+ debug("spl: nand - using hw ecc\n");
+ gpmc_init();
+ nand_init();
+ break;
+ default:
+ puts("spl: ERROR: This bootmode is not implemented - hanging");
+ hang();
+ }
+
+ /*use CONFIG_SYS_TEXT_BASE as temporary storage area */
+ header = (struct image_header *)(CONFIG_SYS_TEXT_BASE);
+
+#ifdef CONFIG_NAND_ENV_DST
+ nand_spl_load_image(CONFIG_ENV_OFFSET,
+ CONFIG_SYS_NAND_PAGE_SIZE, (void *)header);
+ spl_parse_image_header(header);
+ nand_spl_load_image(CONFIG_ENV_OFFSET, spl_image.size,
+ (void *)image_load_addr);
+#ifdef CONFIG_ENV_OFFSET_REDUND
+ nand_spl_load_image(CONFIG_ENV_OFFSET_REDUND,
+ CONFIG_SYS_NAND_PAGE_SIZE, (void *)header);
+ spl_parse_image_header(header);
+ nand_spl_load_image(CONFIG_ENV_OFFSET_REDUND, spl_image.size,
+ (void *)image_load_addr);
+#endif
+#endif
+ /* Load u-boot */
+ nand_spl_load_image(CONFIG_SYS_NAND_U_BOOT_OFFS,
+ CONFIG_SYS_NAND_PAGE_SIZE, (void *)header);
+ spl_parse_image_header(header);
+ nand_spl_load_image(CONFIG_SYS_NAND_U_BOOT_OFFS,
+ spl_image.size, (void *)spl_image.load_addr);
+ nand_deselect();
+}
diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c
index 0448bc9..1b3ef69 100644
--- a/arch/arm/cpu/armv7/omap3/board.c
+++ b/arch/arm/cpu/armv7/omap3/board.c
@@ -39,6 +39,7 @@
#include <asm/cache.h>
#include <asm/armv7.h>
#include <asm/arch/gpio.h>
+#include <asm/omap_common.h>
/* Declarations */
extern omap3_sysinfo sysinfo;
@@ -56,6 +57,41 @@ static const struct gpio_bank gpio_bank_34xx[6] = {
const struct gpio_bank *const omap_gpio_bank = gpio_bank_34xx;
+#ifdef CONFIG_SPL_BUILD
+/*
+* We use static variables because global data is not ready yet.
+* Initialized data is available in SPL right from the beginning.
+* We would not typically need to save these parameters in regular
+* U-Boot. This is needed only in SPL at the moment.
+*/
+u32 omap3_boot_device = BOOT_DEVICE_NAND;
+
+/* auto boot mode detection is not possible for OMAP3 - hard code */
+u32 omap_boot_mode(void)
+{
+ switch (omap_boot_device()) {
+ case BOOT_DEVICE_MMC2:
+ return MMCSD_MODE_RAW;
+ case BOOT_DEVICE_MMC1:
+ return MMCSD_MODE_FAT;
+ break;
+ case BOOT_DEVICE_NAND:
+ return NAND_MODE_HW_ECC;
+ break;
+ default:
+ puts("spl: ERROR: unknown device - can't select boot mode\n");
+ hang();
+ }
+}
+
+u32 omap_boot_device(void)
+{
+ return omap3_boot_device;
+}
+
+#endif /* CONFIG_SPL_BUILD */
+
+
/******************************************************************************
* Routine: delay
* Description: spinning delay to use before udelay works
@@ -197,6 +233,10 @@ void s_init(void)
per_clocks_enable();
+#ifdef CONFIG_SPL_BUILD
+ preloader_console_init();
+#endif
+
if (!in_sdram)
mem_init();
}
@@ -245,7 +285,7 @@ void abort(void)
{
}
-#ifdef CONFIG_NAND_OMAP_GPMC
+#if defined(CONFIG_NAND_OMAP_GPMC) & !defined(CONFIG_SPL_BUILD)
/******************************************************************************
* OMAP3 specific command to switch between NAND HW and SW ecc
*****************************************************************************/
@@ -273,7 +313,7 @@ U_BOOT_CMD(
"[hw/sw] - Switch between NAND hardware (hw) or software (sw) ecc algorithm"
);
-#endif /* CONFIG_NAND_OMAP_GPMC */
+#endif /* CONFIG_NAND_OMAP_GPMC & !CONFIG_SPL_BUILD */
#ifdef CONFIG_DISPLAY_BOARDINFO
/**
@@ -410,3 +450,9 @@ void enable_caches(void)
dcache_enable();
}
#endif
+
+void omap_rev_string(char *omap_rev_string)
+{
+ sprintf(omap_rev_string, "OMAP3, sorry revision detection" \
+ " unimplemented");
+}
diff --git a/arch/arm/cpu/armv7/omap3/config.mk b/arch/arm/cpu/armv7/omap3/config.mk
new file mode 100644
index 0000000..b34fa64
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap3/config.mk
@@ -0,0 +1,30 @@
+#
+# Copyright 2011 Linaro Limited
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# (C) Copyright 2010
+# Texas Instruments, <www.ti.com>
+#
+# Aneesh V <aneesh@ti.com>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+ifdef CONFIG_SPL_BUILD
+ALL-y += $(OBJTREE)/MLO
+else
+ALL-y += $(obj)u-boot.img
+endif
diff --git a/arch/arm/cpu/armv7/omap3/lowlevel_init.S b/arch/arm/cpu/armv7/omap3/lowlevel_init.S
index 67e8ceb..a308ebd 100644
--- a/arch/arm/cpu/armv7/omap3/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/omap3/lowlevel_init.S
@@ -35,6 +35,16 @@
_TEXT_BASE:
.word CONFIG_SYS_TEXT_BASE /* sdram load addr from config.mk */
+.global save_boot_params
+save_boot_params:
+#ifdef CONFIG_SPL_BUILD
+ ldr r4, =omap3_boot_device
+ ldr r5, [r0, #0x4]
+ and r5, r5, #0xff
+ str r5, [r4]
+#endif
+ bx lr
+
.global omap3_gp_romcode_call
omap3_gp_romcode_call:
PUSH {r4-r12, lr} @ Save all registers from ROM code!
diff --git a/arch/arm/cpu/armv7/omap3/sdrc.c b/arch/arm/cpu/armv7/omap3/sdrc.c
index 2a7970b..0dd1955 100644
--- a/arch/arm/cpu/armv7/omap3/sdrc.c
+++ b/arch/arm/cpu/armv7/omap3/sdrc.c
@@ -8,6 +8,9 @@
* Copyright (C) 2004-2010
* Texas Instruments Incorporated - http://www.ti.com/
*
+ * Copyright (C) 2011
+ * Corscience GmbH & Co. KG - Simon Schwarz <schwarz@corscience.de>
+ *
* Author :
* Vaibhav Hiremath <hvaibhav@ti.com>
*
@@ -133,13 +136,40 @@ void do_sdrc_init(u32 cs, u32 early)
sdelay(0x20000);
}
+/* As long as V_MCFG and V_RFR_CTRL is not defined for all OMAP3 boards we need
+ * to prevent this to be build in non-SPL build */
+#ifdef CONFIG_SPL_BUILD
+ /* If we use a SPL there is no x-loader nor config header so we have
+ * to do the job ourselfs
+ */
+ if (cs == CS0) {
+ sdrc_actim_base0 = (struct sdrc_actim *)SDRC_ACTIM_CTRL0_BASE;
+
+ /* General SDRC config */
+ writel(V_MCFG, &sdrc_base->cs[cs].mcfg);
+ writel(V_RFR_CTRL, &sdrc_base->cs[cs].rfr_ctrl);
+
+ /* AC timings */
+ writel(V_ACTIMA_165, &sdrc_actim_base0->ctrla);
+ writel(V_ACTIMB_165, &sdrc_actim_base0->ctrlb);
+
+ /* Initialize */
+ writel(CMD_NOP, &sdrc_base->cs[cs].manual);
+ writel(CMD_PRECHARGE, &sdrc_base->cs[cs].manual);
+ writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual);
+ writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual);
+
+ writel(V_MR, &sdrc_base->cs[cs].mr);
+ }
+#endif
+
/*
* SDRC timings are set up by x-load or config header
* We don't need to redo them here.
* Older x-loads configure only CS0
* configure CS1 to handle this ommission
*/
- if (cs) {
+ if (cs == CS1) {
sdrc_actim_base0 = (struct sdrc_actim *)SDRC_ACTIM_CTRL0_BASE;
sdrc_actim_base1 = (struct sdrc_actim *)SDRC_ACTIM_CTRL1_BASE;
writel(readl(&sdrc_base->cs[CS0].mcfg),
diff --git a/arch/arm/cpu/armv7/omap3/sys_info.c b/arch/arm/cpu/armv7/omap3/sys_info.c
index bdb151d..22887ae 100644
--- a/arch/arm/cpu/armv7/omap3/sys_info.c
+++ b/arch/arm/cpu/armv7/omap3/sys_info.c
@@ -44,13 +44,13 @@ static char *rev_s[CPU_3XX_MAX_REV] = {
"UNKNOWN",
"UNKNOWN",
"3.1.2"};
-#endif /* CONFIG_DISPLAY_CPUINFO */
/* this is the revision table for 37xx CPUs */
static char *rev_s_37xx[CPU_37XX_MAX_REV] = {
"1.0",
"1.1",
"1.2"};
+#endif /* CONFIG_DISPLAY_CPUINFO */
/*****************************************************************
* dieid_num_r(void) - read and set die ID
diff --git a/arch/arm/cpu/armv7/omap4/board.c b/arch/arm/cpu/armv7/omap4/board.c
index 309b244..8584fdd 100644
--- a/arch/arm/cpu/armv7/omap4/board.c
+++ b/arch/arm/cpu/armv7/omap4/board.c
@@ -257,6 +257,7 @@ void s_init(void)
watchdog_init();
set_mux_conf_regs();
#ifdef CONFIG_SPL_BUILD
+ setup_clocks_for_console();
preloader_console_init();
do_io_settings();
#endif
diff --git a/arch/arm/include/asm/arch-armada100/armada100.h b/arch/arm/include/asm/arch-armada100/armada100.h
index d5d125a..c449d4e 100644
--- a/arch/arm/include/asm/arch-armada100/armada100.h
+++ b/arch/arm/include/asm/arch-armada100/armada100.h
@@ -41,8 +41,13 @@
/* Functional Clock Selection Mask */
#define APBC_FNCLKSEL(x) (((x) & 0xf) << 4)
+/* Fast Ethernet Controller Clock register definition */
+#define FE_CLK_RST 0x1
+#define FE_CLK_ENA 0x8
+
/* Register Base Addresses */
#define ARMD1_DRAM_BASE 0xB0000000
+#define ARMD1_FEC_BASE 0xC0800000
#define ARMD1_TIMER_BASE 0xD4014000
#define ARMD1_APBC1_BASE 0xD4015000
#define ARMD1_APBC2_BASE 0xD4015800
@@ -84,6 +89,59 @@ struct armd1mpmu_registers {
};
/*
+ * Application Subsystem Power Management
+ * Refer Datasheet Appendix A.9
+ */
+struct armd1apmu_registers {
+ u32 pcr; /* 0x000 */
+ u32 ccr; /* 0x004 */
+ u32 pad1;
+ u32 ccsr; /* 0x00C */
+ u32 fc_timer; /* 0x010 */
+ u32 pad2;
+ u32 ideal_cfg; /* 0x018 */
+ u8 pad3[0x04C - 0x018 - 4];
+ u32 lcdcrc; /* 0x04C */
+ u32 cciccrc; /* 0x050 */
+ u32 sd1crc; /* 0x054 */
+ u32 sd2crc; /* 0x058 */
+ u32 usbcrc; /* 0x05C */
+ u32 nfccrc; /* 0x060 */
+ u32 dmacrc; /* 0x064 */
+ u32 pad4;
+ u32 buscrc; /* 0x06C */
+ u8 pad5[0x07C - 0x06C - 4];
+ u32 wake_clr; /* 0x07C */
+ u8 pad6[0x090 - 0x07C - 4];
+ u32 core_status; /* 0x090 */
+ u32 rfsc; /* 0x094 */
+ u32 imr; /* 0x098 */
+ u32 irwc; /* 0x09C */
+ u32 isr; /* 0x0A0 */
+ u8 pad7[0x0B0 - 0x0A0 - 4];
+ u32 mhst; /* 0x0B0 */
+ u32 msr; /* 0x0B4 */
+ u8 pad8[0x0C0 - 0x0B4 - 4];
+ u32 msst; /* 0x0C0 */
+ u32 pllss; /* 0x0C4 */
+ u32 smb; /* 0x0C8 */
+ u32 gccrc; /* 0x0CC */
+ u8 pad9[0x0D4 - 0x0CC - 4];
+ u32 smccrc; /* 0x0D4 */
+ u32 pad10;
+ u32 xdcrc; /* 0x0DC */
+ u32 sd3crc; /* 0x0E0 */
+ u32 sd4crc; /* 0x0E4 */
+ u8 pad11[0x0F0 - 0x0E4 - 4];
+ u32 cfcrc; /* 0x0F0 */
+ u32 mspcrc; /* 0x0F4 */
+ u32 cmucrc; /* 0x0F8 */
+ u32 fecrc; /* 0x0FC */
+ u32 pciecrc; /* 0x100 */
+ u32 epdcrc; /* 0x104 */
+};
+
+/*
* APB1 Clock Reset/Control Registers
* Refer Datasheet Appendix A.10
*/
diff --git a/arch/arm/include/asm/arch-armada100/gpio.h b/arch/arm/include/asm/arch-armada100/gpio.h
new file mode 100644
index 0000000..9e5e7b9
--- /dev/null
+++ b/arch/arm/include/asm/arch-armada100/gpio.h
@@ -0,0 +1,48 @@
+/*
+ * (C) Copyright 2011
+ * eInfochips Ltd. <www.einfochips.com>
+ * Written-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
+ *
+ * (C) Copyright 2010
+ * Marvell Semiconductor <www.marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef _ASM_ARCH_GPIO_H
+#define _ASM_ARCH_GPIO_H
+
+#include <asm/types.h>
+#include <asm/arch/armada100.h>
+
+#define GPIO_HIGH 1
+#define GPIO_LOW 0
+
+#define GPIO_TO_REG(gp) (gp >> 5)
+#define GPIO_TO_BIT(gp) (1 << (gp & 0x1F))
+#define GPIO_VAL(gp, val) ((val >> (gp & 0x1F)) & 0x01)
+
+static inline void *get_gpio_base(int bank)
+{
+ const unsigned int offset[4] = {0, 4, 8, 0x100};
+ /* gpio register bank offset - refer Appendix A.36 */
+ return (struct gpio_reg *)(ARMD1_GPIO_BASE + offset[bank]);
+}
+
+#endif /* _ASM_ARCH_GPIO_H */
diff --git a/arch/arm/include/asm/arch-armada100/mfp.h b/arch/arm/include/asm/arch-armada100/mfp.h
index d6e0494..da76b58 100644
--- a/arch/arm/include/asm/arch-armada100/mfp.h
+++ b/arch/arm/include/asm/arch-armada100/mfp.h
@@ -64,6 +64,25 @@
#define MFP105_CI2C_SDA (MFP_REG(0x1a4) | MFP_AF1 | MFP_DRIVE_MEDIUM)
#define MFP106_CI2C_SCL (MFP_REG(0x1a8) | MFP_AF1 | MFP_DRIVE_MEDIUM)
+/* Fast Ethernet */
+#define MFP086_ETH_TXCLK (MFP_REG(0x158) | MFP_AF5 | MFP_DRIVE_MEDIUM)
+#define MFP087_ETH_TXEN (MFP_REG(0x15C) | MFP_AF5 | MFP_DRIVE_MEDIUM)
+#define MFP088_ETH_TXDQ3 (MFP_REG(0x160) | MFP_AF5 | MFP_DRIVE_MEDIUM)
+#define MFP089_ETH_TXDQ2 (MFP_REG(0x164) | MFP_AF5 | MFP_DRIVE_MEDIUM)
+#define MFP090_ETH_TXDQ1 (MFP_REG(0x168) | MFP_AF5 | MFP_DRIVE_MEDIUM)
+#define MFP091_ETH_TXDQ0 (MFP_REG(0x16C) | MFP_AF5 | MFP_DRIVE_MEDIUM)
+#define MFP092_ETH_CRS (MFP_REG(0x170) | MFP_AF5 | MFP_DRIVE_MEDIUM)
+#define MFP093_ETH_COL (MFP_REG(0x174) | MFP_AF5 | MFP_DRIVE_MEDIUM)
+#define MFP094_ETH_RXCLK (MFP_REG(0x178) | MFP_AF5 | MFP_DRIVE_MEDIUM)
+#define MFP095_ETH_RXER (MFP_REG(0x17C) | MFP_AF5 | MFP_DRIVE_MEDIUM)
+#define MFP096_ETH_RXDQ3 (MFP_REG(0x180) | MFP_AF5 | MFP_DRIVE_MEDIUM)
+#define MFP097_ETH_RXDQ2 (MFP_REG(0x184) | MFP_AF5 | MFP_DRIVE_MEDIUM)
+#define MFP098_ETH_RXDQ1 (MFP_REG(0x188) | MFP_AF5 | MFP_DRIVE_MEDIUM)
+#define MFP099_ETH_RXDQ0 (MFP_REG(0x18C) | MFP_AF5 | MFP_DRIVE_MEDIUM)
+#define MFP100_ETH_MDC (MFP_REG(0x190) | MFP_AF5 | MFP_DRIVE_MEDIUM)
+#define MFP101_ETH_MDIO (MFP_REG(0x194) | MFP_AF5 | MFP_DRIVE_MEDIUM)
+#define MFP103_ETH_RXDV (MFP_REG(0x19C) | MFP_AF5 | MFP_DRIVE_MEDIUM)
+
/* More macros can be defined here... */
#define MFP_PIN_MAX 117
diff --git a/arch/arm/include/asm/arch-davinci/am1808_lowlevel.h b/arch/arm/include/asm/arch-davinci/am1808_lowlevel.h
new file mode 100644
index 0000000..0bc7f76
--- /dev/null
+++ b/arch/arm/include/asm/arch-davinci/am1808_lowlevel.h
@@ -0,0 +1,44 @@
+/*
+ * SoC-specific lowlevel code for AM1808 and similar chips
+ *
+ * Copyright (C) 2011
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __AM1808_LOWLEVEL_H
+#define __AM1808_LOWLEVEL_H
+
+/* NOR Boot Configuration Word Field Descriptions */
+#define AM1808_NORBOOT_COPY_XK(X) ((X - 1) << 8)
+#define AM1808_NORBOOT_METHOD_DIRECT (1 << 4)
+#define AM1808_NORBOOT_16BIT (1 << 0)
+
+#define dv_maskbits(addr, val) \
+ writel((readl(addr) & val), addr)
+
+void am1808_waitloop(unsigned long loopcnt);
+int am1808_pll_init(struct davinci_pllc_regs *reg, unsigned long pllmult);
+void am1808_lpc_transition(unsigned char pscnum, unsigned char module,
+ unsigned char domain, unsigned char state);
+int am1808_ddr_setup(unsigned int freq);
+void am1808_psc_init(void);
+void am1808_pinmux_ctl(unsigned long offset, unsigned long mask,
+ unsigned long value);
+
+#endif /* #ifndef __AM1808_LOWLEVEL_H */
diff --git a/arch/arm/include/asm/arch-davinci/ddr2_defs.h b/arch/arm/include/asm/arch-davinci/ddr2_defs.h
new file mode 100644
index 0000000..1b9430c
--- /dev/null
+++ b/arch/arm/include/asm/arch-davinci/ddr2_defs.h
@@ -0,0 +1,96 @@
+/*
+ * Copyright (C) 2011
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _DV_DDR2_DEFS_H_
+#define _DV_DDR2_DEFS_H_
+
+/*
+ * DDR2 Memory Ctrl Register structure
+ * See sprueh7d.pdf for more details.
+ */
+struct dv_ddr2_regs_ctrl {
+ unsigned char rsvd0[4]; /* 0x00 */
+ unsigned int sdrstat; /* 0x04 */
+ unsigned int sdbcr; /* 0x08 */
+ unsigned int sdrcr; /* 0x0C */
+ unsigned int sdtimr; /* 0x10 */
+ unsigned int sdtimr2; /* 0x14 */
+ unsigned char rsvd1[4]; /* 0x18 */
+ unsigned int sdbcr2; /* 0x1C */
+ unsigned int pbbpr; /* 0x20 */
+ unsigned char rsvd2[156]; /* 0x24 */
+ unsigned int irr; /* 0xC0 */
+ unsigned int imr; /* 0xC4 */
+ unsigned int imsr; /* 0xC8 */
+ unsigned int imcr; /* 0xCC */
+ unsigned char rsvd3[20]; /* 0xD0 */
+ unsigned int ddrphycr; /* 0xE4 */
+ unsigned int ddrphycr2; /* 0xE8 */
+ unsigned char rsvd4[4]; /* 0xEC */
+};
+
+#define DV_DDR_PHY_PWRDNEN 0x40
+#define DV_DDR_PHY_EXT_STRBEN 0x80
+#define DV_DDR_PHY_RD_LATENCY_SHIFT 0
+
+#define DV_DDR_SDTMR1_RFC_SHIFT 25
+#define DV_DDR_SDTMR1_RP_SHIFT 22
+#define DV_DDR_SDTMR1_RCD_SHIFT 19
+#define DV_DDR_SDTMR1_WR_SHIFT 16
+#define DV_DDR_SDTMR1_RAS_SHIFT 11
+#define DV_DDR_SDTMR1_RC_SHIFT 6
+#define DV_DDR_SDTMR1_RRD_SHIFT 3
+#define DV_DDR_SDTMR1_WTR_SHIFT 0
+
+#define DV_DDR_SDTMR2_RASMAX_SHIFT 27
+#define DV_DDR_SDTMR2_XP_SHIFT 25
+#define DV_DDR_SDTMR2_XSNR_SHIFT 16
+#define DV_DDR_SDTMR2_XSRD_SHIFT 8
+#define DV_DDR_SDTMR2_RTP_SHIFT 5
+#define DV_DDR_SDTMR2_CKE_SHIFT 0
+
+#define DV_DDR_SDCR_DDR2TERM1_SHIFT 27
+#define DV_DDR_SDCR_IBANK_POS_SHIFT 26
+#define DV_DDR_SDCR_MSDRAMEN_SHIFT 25
+#define DV_DDR_SDCR_DDRDRIVE1_SHIFT 24
+#define DV_DDR_SDCR_BOOTUNLOCK_SHIFT 23
+#define DV_DDR_SDCR_DDR_DDQS_SHIFT 22
+#define DV_DDR_SDCR_DDR2EN_SHIFT 20
+#define DV_DDR_SDCR_DDRDRIVE0_SHIFT 18
+#define DV_DDR_SDCR_DDREN_SHIFT 17
+#define DV_DDR_SDCR_SDRAMEN_SHIFT 16
+#define DV_DDR_SDCR_TIMUNLOCK_SHIFT 15
+#define DV_DDR_SDCR_BUS_WIDTH_SHIFT 14
+#define DV_DDR_SDCR_CL_SHIFT 9
+#define DV_DDR_SDCR_IBANK_SHIFT 4
+#define DV_DDR_SDCR_PAGESIZE_SHIFT 0
+
+#define DV_DDR_SRCR_LPMODEN_SHIFT 31
+#define DV_DDR_SRCR_MCLKSTOPEN_SHIFT 30
+
+#define DV_DDR_BOOTUNLOCK (1 << DV_DDR_SDCR_BOOTUNLOCK_SHIFT)
+#define DV_DDR_TIMUNLOCK (1 << DV_DDR_SDCR_TIMUNLOCK_SHIFT)
+
+#define dv_ddr2_regs_ctrl \
+ ((struct dv_ddr2_regs_ctrl *)DAVINCI_DDR_EMIF_CTRL_BASE)
+
+#endif /* _DV_DDR2_DEFS_H_ */
diff --git a/arch/arm/include/asm/arch-davinci/emac_defs.h b/arch/arm/include/asm/arch-davinci/emac_defs.h
index 4a4ee04..294a9a8 100644
--- a/arch/arm/include/asm/arch-davinci/emac_defs.h
+++ b/arch/arm/include/asm/arch-davinci/emac_defs.h
@@ -377,6 +377,12 @@ typedef struct
int (*auto_negotiate)(int phy_addr);
} phy_t;
+#define PHY_KSZ8873 (0x00221450)
+int ksz8873_is_phy_connected(int phy_addr);
+int ksz8873_get_link_speed(int phy_addr);
+int ksz8873_init_phy(int phy_addr);
+int ksz8873_auto_negotiate(int phy_addr);
+
#define PHY_LXT972 (0x001378e2)
int lxt972_is_phy_connected(int phy_addr);
int lxt972_get_link_speed(int phy_addr);
diff --git a/arch/arm/include/asm/arch-davinci/gpio.h b/arch/arm/include/asm/arch-davinci/gpio.h
index 29dcccf..ef65ffb 100644
--- a/arch/arm/include/asm/arch-davinci/gpio.h
+++ b/arch/arm/include/asm/arch-davinci/gpio.h
@@ -35,6 +35,7 @@
#define DAVINCI_GPIO_BANK23 0x01E26038
#define DAVINCI_GPIO_BANK45 0x01E26060
#define DAVINCI_GPIO_BANK67 0x01E26088
+#define DAVINCI_GPIO_BANK8 0x01E260B0
#endif /* CONFIG_SOC_DA8XX */
struct davinci_gpio {
@@ -62,6 +63,7 @@ struct davinci_gpio_bank {
#define davinci_gpio_bank23 ((struct davinci_gpio *)DAVINCI_GPIO_BANK23)
#define davinci_gpio_bank45 ((struct davinci_gpio *)DAVINCI_GPIO_BANK45)
#define davinci_gpio_bank67 ((struct davinci_gpio *)DAVINCI_GPIO_BANK67)
+#define davinci_gpio_bank8 ((struct davinci_gpio *)DAVINCI_GPIO_BANK8)
#define gpio_status() gpio_info()
#define GPIO_NAME_SIZE 20
diff --git a/arch/arm/include/asm/arch-davinci/hardware.h b/arch/arm/include/asm/arch-davinci/hardware.h
index 692d507..b6a3209 100644
--- a/arch/arm/include/asm/arch-davinci/hardware.h
+++ b/arch/arm/include/asm/arch-davinci/hardware.h
@@ -128,6 +128,7 @@ typedef volatile unsigned int * dv_reg_p;
#define DAVINCI_TIMER0_BASE 0x01c20000
#define DAVINCI_TIMER1_BASE 0x01c21000
#define DAVINCI_WDOG_BASE 0x01c21000
+#define DAVINCI_RTC_BASE 0x01c23000
#define DAVINCI_PLL_CNTRL0_BASE 0x01c11000
#define DAVINCI_PLL_CNTRL1_BASE 0x01e1a000
#define DAVINCI_PSC0_BASE 0x01c10000
@@ -141,8 +142,11 @@ typedef volatile unsigned int * dv_reg_p;
#define DAVINCI_EMAC_WRAPPER_CNTRL_REGS_BASE 0x01e22000
#define DAVINCI_EMAC_WRAPPER_RAM_BASE 0x01e20000
#define DAVINCI_MDIO_CNTRL_REGS_BASE 0x01e24000
+#define DAVINCI_SYSCFG1_BASE 0x01e2c000
#define DAVINCI_MMC_SD0_BASE 0x01c40000
#define DAVINCI_MMC_SD1_BASE 0x01e1b000
+#define DAVINCI_TIMER2_BASE 0x01f0c000
+#define DAVINCI_TIMER3_BASE 0x01f0d000
#define DAVINCI_ASYNC_EMIF_CNTRL_BASE 0x68000000
#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x40000000
#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE 0x60000000
@@ -318,6 +322,11 @@ void davinci_errata_workarounds(void);
#else /* CONFIG_SOC_DA8XX */
+#define PSC_ENABLE 0x3
+#define PSC_DISABLE 0x2
+#define PSC_SYNCRESET 0x1
+#define PSC_SWRSTDISABLE 0x0
+
#define PSC_PSC0_MODULE_ID_CNT 16
#define PSC_PSC1_MODULE_ID_CNT 32
@@ -445,6 +454,27 @@ struct davinci_syscfg_regs {
#define DAVINCI_SYSCFG_SUSPSRC_UART2 (1 << 20)
#define DAVINCI_SYSCFG_SUSPSRC_TIMER0 (1 << 27)
+struct davinci_syscfg1_regs {
+ dv_reg vtpio_ctl;
+ dv_reg ddr_slew;
+ dv_reg deepsleep;
+ dv_reg pupd_ena;
+ dv_reg pupd_sel;
+ dv_reg rxactive;
+ dv_reg pwrdwn;
+};
+
+#define davinci_syscfg1_regs \
+ ((struct davinci_syscfg1_regs *)DAVINCI_SYSCFG1_BASE)
+
+#define DDR_SLEW_CMOSEN_BIT 4
+
+#define VTP_POWERDWN (1 << 6)
+#define VTP_LOCK (1 << 7)
+#define VTP_CLKRZ (1 << 13)
+#define VTP_READY (1 << 15)
+#define VTP_IOPWRDWN (1 << 14)
+
/* Interrupt controller */
struct davinci_aintc_regs {
dv_reg revid;
diff --git a/arch/arm/include/asm/arch-davinci/timer_defs.h b/arch/arm/include/asm/arch-davinci/timer_defs.h
new file mode 100644
index 0000000..53c961e
--- /dev/null
+++ b/arch/arm/include/asm/arch-davinci/timer_defs.h
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2011 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _TIMER_DEFS_H_
+#define _TIMER_DEFS_H_
+
+struct davinci_timer {
+ u_int32_t pid12;
+ u_int32_t emumgt;
+ u_int32_t na1;
+ u_int32_t na2;
+ u_int32_t tim12;
+ u_int32_t tim34;
+ u_int32_t prd12;
+ u_int32_t prd34;
+ u_int32_t tcr;
+ u_int32_t tgcr;
+ u_int32_t wdtcr;
+};
+
+#ifdef CONFIG_HW_WATCHDOG
+void davinci_hw_watchdog_enable(void);
+void davinci_hw_watchdog_reset(void);
+#endif
+#endif /* _TIMER_DEFS_H_ */
diff --git a/arch/arm/include/asm/arch-mx25/imx-regs.h b/arch/arm/include/asm/arch-mx25/imx-regs.h
index 9e30f7c..eece138 100644
--- a/arch/arm/include/asm/arch-mx25/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx25/imx-regs.h
@@ -36,7 +36,6 @@
#ifndef __ASSEMBLY__
#ifdef CONFIG_FEC_MXC
extern void mx25_fec_init_pins(void);
-extern void imx_get_mac_from_fuse(unsigned char *mac);
#endif
/* Clock Control Module (CCM) registers */
@@ -351,4 +350,7 @@ struct aips_regs {
#define GPIO3_BASE_ADDR IMX_GPIO3_BASE
#define GPIO4_BASE_ADDR IMX_GPIO4_BASE
+#define CHIP_REV_1_0 0x10
+#define CHIP_REV_1_1 0x11
+
#endif /* _IMX_REGS_H */
diff --git a/arch/arm/include/asm/arch-mx25/sys_proto.h b/arch/arm/include/asm/arch-mx25/sys_proto.h
new file mode 100644
index 0000000..6a01a7b0
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx25/sys_proto.h
@@ -0,0 +1,29 @@
+/*
+ * (C) Copyright 2009
+ * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _SYS_PROTO_H_
+#define _SYS_PROTO_H_
+
+void mx25_uart1_init_pins(void);
+
+#endif
diff --git a/arch/arm/include/asm/arch-mx27/imx-regs.h b/arch/arm/include/asm/arch-mx27/imx-regs.h
index b4b2fe6..83ab216 100644
--- a/arch/arm/include/asm/arch-mx27/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx27/imx-regs.h
@@ -34,7 +34,6 @@ extern void mx27_uart1_init_pins(void);
#ifdef CONFIG_FEC_MXC
extern void mx27_fec_init_pins(void);
-extern void imx_get_mac_from_fuse(unsigned char *mac);
#endif /* CONFIG_FEC_MXC */
#ifdef CONFIG_MXC_MMC
diff --git a/arch/arm/include/asm/arch-mx31/imx-regs.h b/arch/arm/include/asm/arch-mx31/imx-regs.h
index 2064870..0dcd9fe 100644
--- a/arch/arm/include/asm/arch-mx31/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx31/imx-regs.h
@@ -71,6 +71,8 @@ struct cspi_regs {
/* Watchdog Timer (WDOG) registers */
#define WDOG_ENABLE (1 << 2)
#define WDOG_WT_SHIFT 8
+#define WDOG_WDZST (1 << 0)
+
struct wdog_regs {
u16 wcr; /* Control */
u16 wsr; /* Service */
diff --git a/arch/arm/include/asm/arch-mx35/imx-regs.h b/arch/arm/include/asm/arch-mx35/imx-regs.h
index e741fb0..0c566f2 100644
--- a/arch/arm/include/asm/arch-mx35/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx35/imx-regs.h
@@ -178,8 +178,6 @@
#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
#include <asm/types.h>
-extern void imx_get_mac_from_fuse(unsigned char *mac);
-
enum mxc_main_clocks {
CPU_CLK,
AHB_CLK,
diff --git a/arch/arm/include/asm/arch-mx5/crm_regs.h b/arch/arm/include/asm/arch-mx5/crm_regs.h
index 4ed8eb3..fcc0e36 100644
--- a/arch/arm/include/asm/arch-mx5/crm_regs.h
+++ b/arch/arm/include/asm/arch-mx5/crm_regs.h
@@ -200,4 +200,15 @@ struct mxc_ccm_reg {
/* Define the bits in register CLPCR */
#define MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS (0x1 << 18)
+#define MXC_DPLLC_CTL_HFSM (1 << 7)
+#define MXC_DPLLC_CTL_DPDCK0_2_EN (1 << 12)
+
+#define MXC_DPLLC_OP_PDF_MASK 0xf
+#define MXC_DPLLC_OP_MFI_MASK (0xf << 4)
+#define MXC_DPLLC_OP_MFI_OFFSET 4
+
+#define MXC_DPLLC_MFD_MFD_MASK 0x7ffffff
+
+#define MXC_DPLLC_MFN_MFN_MASK 0x7ffffff
+
#endif /* __ARCH_ARM_MACH_MX51_CRM_REGS_H__ */
diff --git a/arch/arm/include/asm/arch-mx5/imx-regs.h b/arch/arm/include/asm/arch-mx5/imx-regs.h
index a4e680b..d069209 100644
--- a/arch/arm/include/asm/arch-mx5/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx5/imx-regs.h
@@ -100,6 +100,9 @@
#define PLL1_BASE_ADDR (AIPS2_BASE_ADDR + 0x00080000)
#define PLL2_BASE_ADDR (AIPS2_BASE_ADDR + 0x00084000)
#define PLL3_BASE_ADDR (AIPS2_BASE_ADDR + 0x00088000)
+#ifdef CONFIG_MX53
+#define PLL4_BASE_ADDR (AIPS2_BASE_ADDR + 0x0008c000)
+#endif
#define AHBMAX_BASE_ADDR (AIPS2_BASE_ADDR + 0x00094000)
#define IIM_BASE_ADDR (AIPS2_BASE_ADDR + 0x00098000)
#define CSU_BASE_ADDR (AIPS2_BASE_ADDR + 0x0009C000)
@@ -282,8 +285,6 @@
#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
#include <asm/types.h>
-extern void imx_get_mac_from_fuse(unsigned char *mac);
-
#define __REG(x) (*((volatile u32 *)(x)))
#define __REG16(x) (*((volatile u16 *)(x)))
#define __REG8(x) (*((volatile u8 *)(x)))
diff --git a/arch/arm/include/asm/arch-omap3/mem.h b/arch/arm/include/asm/arch-omap3/mem.h
index f165949..8e28f77 100644
--- a/arch/arm/include/asm/arch-omap3/mem.h
+++ b/arch/arm/include/asm/arch-omap3/mem.h
@@ -128,6 +128,33 @@ enum {
(MICRON_XSR_165 << 0) | (MICRON_TXP_165 << 8) | \
(MICRON_TWTR_165 << 16))
+#define MICRON_RAMTYPE 0x1
+#define MICRON_DDRTYPE 0x0
+#define MICRON_DEEPPD 0x1
+#define MICRON_B32NOT16 0x1
+#define MICRON_BANKALLOCATION 0x2
+#define MICRON_RAMSIZE ((PHYS_SDRAM_1_SIZE/(1024*1024))/2)
+#define MICRON_ADDRMUXLEGACY 0x1
+#define MICRON_CASWIDTH 0x5
+#define MICRON_RASWIDTH 0x2
+#define MICRON_LOCKSTATUS 0x0
+#define MICRON_V_MCFG ((MICRON_LOCKSTATUS << 30) | (MICRON_RASWIDTH << 24) | \
+ (MICRON_CASWIDTH << 20) | (MICRON_ADDRMUXLEGACY << 19) | \
+ (MICRON_RAMSIZE << 8) | (MICRON_BANKALLOCATION << 6) | \
+ (MICRON_B32NOT16 << 4) | (MICRON_DEEPPD << 3) | \
+ (MICRON_DDRTYPE << 2) | (MICRON_RAMTYPE))
+
+#define MICRON_ARCV 2030
+#define MICRON_ARE 0x1
+#define MICRON_V_RFR_CTRL ((MICRON_ARCV << 8) | (MICRON_ARE))
+
+#define MICRON_BL 0x2
+#define MICRON_SIL 0x0
+#define MICRON_CASL 0x3
+#define MICRON_WBST 0x0
+#define MICRON_V_MR ((MICRON_WBST << 9) | (MICRON_CASL << 4) | \
+ (MICRON_SIL << 3) | (MICRON_BL))
+
/*
* NUMONYX part of IGEP v2 (165MHz optimized) 6.06ns
* ACTIMA
@@ -171,10 +198,15 @@ enum {
#define V_ACTIMA_165 INFINEON_V_ACTIMA_165
#define V_ACTIMB_165 INFINEON_V_ACTIMB_165
#endif
+
#ifdef CONFIG_OMAP3_MICRON_DDR
#define V_ACTIMA_165 MICRON_V_ACTIMA_165
#define V_ACTIMB_165 MICRON_V_ACTIMB_165
+#define V_MCFG MICRON_V_MCFG
+#define V_RFR_CTRL MICRON_V_RFR_CTRL
+#define V_MR MICRON_V_MR
#endif
+
#ifdef CONFIG_OMAP3_NUMONYX_DDR
#define V_ACTIMA_165 NUMONYX_V_ACTIMA_165
#define V_ACTIMB_165 NUMONYX_V_ACTIMB_165
@@ -184,6 +216,10 @@ enum {
#error "Please choose the right DDR type in config header"
#endif
+#if defined(CONFIG_SPL_BUILD) && (!defined(V_MCFG) || !defined(V_RFR_CTRL))
+#error "Please choose the right DDR type in config header"
+#endif
+
/*
* GPMC settings -
* Definitions is as per the following format
diff --git a/arch/arm/include/asm/arch-omap3/omap_gpmc.h b/arch/arm/include/asm/arch-omap3/omap_gpmc.h
index bd22bce..800e4ee 100644
--- a/arch/arm/include/asm/arch-omap3/omap_gpmc.h
+++ b/arch/arm/include/asm/arch-omap3/omap_gpmc.h
@@ -80,4 +80,13 @@
}
#endif
+/* GPMC CS configuration for an SMSC LAN9221 ethernet controller */
+#define NET_LAN9221_GPMC_CONFIG1 0x00001000
+#define NET_LAN9221_GPMC_CONFIG2 0x00060700
+#define NET_LAN9221_GPMC_CONFIG3 0x00020201
+#define NET_LAN9221_GPMC_CONFIG4 0x06000700
+#define NET_LAN9221_GPMC_CONFIG5 0x0006090A
+#define NET_LAN9221_GPMC_CONFIG6 0x87030000
+#define NET_LAN9221_GPMC_CONFIG7 0x00000f6c
+
#endif /* __ASM_ARCH_OMAP_GPMC_H */
diff --git a/arch/arm/include/asm/arch-omap3/sys_proto.h b/arch/arm/include/asm/arch-omap3/sys_proto.h
index 995e7cb..7b60051 100644
--- a/arch/arm/include/asm/arch-omap3/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap3/sys_proto.h
@@ -71,4 +71,5 @@ void power_init_r(void);
void dieid_num_r(void);
void do_omap3_emu_romcode_call(u32 service_id, u32 parameters);
void omap3_gp_romcode_call(u32 service_id, u32 parameter);
+void omap_rev_string(char *omap_rev_string);
#endif
diff --git a/arch/arm/include/asm/arch-omap4/omap4.h b/arch/arm/include/asm/arch-omap4/omap4.h
index a6e1e42..fc9c555 100644
--- a/arch/arm/include/asm/arch-omap4/omap4.h
+++ b/arch/arm/include/asm/arch-omap4/omap4.h
@@ -125,6 +125,10 @@
/* CONTROL_EFUSE_2 */
#define CONTROL_EFUSE_2_NMOS_PMOS_PTV_CODE_1 0x00ffc000
+#define MMC1_PWRDNZ (1 << 26)
+#define MMC1_PBIASLITE_PWRDNZ (1 << 22)
+#define MMC1_PBIASLITE_VMODE (1 << 21)
+
#ifndef __ASSEMBLY__
struct s32ktimer {
@@ -141,7 +145,9 @@ struct omap4_sys_ctrl_regs {
unsigned int control_ldosram_iva_voltage_ctrl; /* 0x4A002320 */
unsigned int control_ldosram_mpu_voltage_ctrl; /* 0x4A002324 */
unsigned int control_ldosram_core_voltage_ctrl; /* 0x4A002328 */
- unsigned int pad3[260341];
+ unsigned int pad3[260277];
+ unsigned int control_pbiaslite; /* 0x4A100600 */
+ unsigned int pad4[63];
unsigned int control_efuse_1; /* 0x4A100700 */
unsigned int control_efuse_2; /* 0x4A100704 */
};
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index d3cb857..66d6b71 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -37,6 +37,7 @@
void preloader_console_init(void);
/* Boot device */
+#ifdef CONFIG_OMAP44XX /* OMAP4 */
#define BOOT_DEVICE_NONE 0
#define BOOT_DEVICE_XIP 1
#define BOOT_DEVICE_XIPWAIT 2
@@ -44,13 +45,43 @@ void preloader_console_init(void);
#define BOOT_DEVICE_ONE_NAND 4
#define BOOT_DEVICE_MMC1 5
#define BOOT_DEVICE_MMC2 6
+#elif defined(CONFIG_OMAP34XX) /* OMAP3 */
+#define BOOT_DEVICE_NONE 0
+#define BOOT_DEVICE_XIP 1
+#define BOOT_DEVICE_NAND 2
+#define BOOT_DEVICE_ONE_NAND 3
+#define BOOT_DEVICE_MMC2 5 /*emmc*/
+#define BOOT_DEVICE_MMC1 6
+#define BOOT_DEVICE_XIPWAIT 7
+#endif
/* Boot type */
#define MMCSD_MODE_UNDEFINED 0
#define MMCSD_MODE_RAW 1
#define MMCSD_MODE_FAT 2
+#define NAND_MODE_HW_ECC 3
+
+struct spl_image_info {
+ const char *name;
+ u8 os;
+ u32 load_addr;
+ u32 entry_point;
+ u32 size;
+};
+
+extern struct spl_image_info spl_image;
u32 omap_boot_device(void);
u32 omap_boot_mode(void);
+
+/* SPL common function s*/
+void spl_parse_image_header(const struct image_header *header);
+
+/* NAND SPL functions */
+void spl_nand_load_image(void);
+
+/* MMC SPL functions */
+void spl_mmc_load_image(void);
+
#endif /* _OMAP_COMMON_H_ */
diff --git a/board/Marvell/gplugd/gplugd.c b/board/Marvell/gplugd/gplugd.c
index dc7d89d..b4f7f81 100644
--- a/board/Marvell/gplugd/gplugd.c
+++ b/board/Marvell/gplugd/gplugd.c
@@ -32,6 +32,13 @@
#include <mvmfp.h>
#include <asm/arch/mfp.h>
#include <asm/arch/armada100.h>
+#include <asm/gpio.h>
+#include <miiphy.h>
+
+#ifdef CONFIG_ARMADA100_FEC
+#include <net.h>
+#include <netdev.h>
+#endif /* CONFIG_ARMADA100_FEC */
DECLARE_GLOBAL_DATA_PTR;
@@ -45,6 +52,26 @@ int board_early_init_f(void)
/* Enable Console on UART3 */
MFPO8_UART3_TXD,
MFPO9_UART3_RXD,
+
+ /* Ethernet PHY Interface */
+ MFP086_ETH_TXCLK,
+ MFP087_ETH_TXEN,
+ MFP088_ETH_TXDQ3,
+ MFP089_ETH_TXDQ2,
+ MFP090_ETH_TXDQ1,
+ MFP091_ETH_TXDQ0,
+ MFP092_ETH_CRS,
+ MFP093_ETH_COL,
+ MFP094_ETH_RXCLK,
+ MFP095_ETH_RXER,
+ MFP096_ETH_RXDQ3,
+ MFP097_ETH_RXDQ2,
+ MFP098_ETH_RXDQ1,
+ MFP099_ETH_RXDQ0,
+ MFP100_ETH_MDC,
+ MFP101_ETH_MDIO,
+ MFP103_ETH_RXDV,
+
MFP_EOC /*End of configuration*/
};
/* configure MFP's */
@@ -58,5 +85,49 @@ int board_init(void)
gd->bd->bi_arch_number = MACH_TYPE_SHEEVAD;
/* adress of boot parameters */
gd->bd->bi_boot_params = armd1_sdram_base(0) + 0x100;
+ /* Assert PHY_RST# */
+ gpio_direction_output(CONFIG_SYS_GPIO_PHY_RST, GPIO_LOW);
+ udelay(10);
+ /* Deassert PHY_RST# */
+ gpio_set_value(CONFIG_SYS_GPIO_PHY_RST, GPIO_HIGH);
return 0;
}
+
+#ifdef CONFIG_ARMADA100_FEC
+int board_eth_init(bd_t *bis)
+{
+ struct armd1apmu_registers *apmu_regs =
+ (struct armd1apmu_registers *)ARMD1_APMU_BASE;
+
+ /* Enable clock of ethernet controller */
+ writel(FE_CLK_RST | FE_CLK_ENA, &apmu_regs->fecrc);
+
+ return armada100_fec_register(ARMD1_FEC_BASE);
+}
+
+#ifdef CONFIG_RESET_PHY_R
+/* Configure and initialize PHY chip 88E3015 */
+void reset_phy(void)
+{
+ u16 phy_adr;
+ const char *name = "armd-fec0";
+
+ if (miiphy_set_current_dev(name))
+ return;
+
+ /* command to read PHY dev address */
+ if (miiphy_read(name, 0xff, 0xff, &phy_adr)) {
+ printf("Err..%s could not read PHY dev address\n", __func__);
+ return;
+ }
+
+ /* Set Ethernet LED in TX blink mode */
+ miiphy_write(name, phy_adr, PHY_LED_MAN_REG, 0x00);
+ miiphy_write(name, phy_adr, PHY_LED_PAR_SEL_REG, PHY_LED_VAL);
+
+ /* reset the phy */
+ miiphy_reset(name, phy_adr);
+ debug("88E3015 Initialized on %s\n", name);
+}
+#endif /* CONFIG_RESET_PHY_R */
+#endif /* CONFIG_ARMADA100_FEC */
diff --git a/board/efikamx/efikamx.c b/board/efikamx/efikamx.c
index 5be1f6c..0c4e24b 100644
--- a/board/efikamx/efikamx.c
+++ b/board/efikamx/efikamx.c
@@ -62,10 +62,13 @@ void efikamx_toggle_led(uint32_t mask);
#define EFIKAMX_BOARD_REV_13 0x3
#define EFIKAMX_BOARD_REV_14 0x4
+#define EFIKASB_BOARD_REV_13 0x1
+#define EFIKASB_BOARD_REV_20 0x2
+
/*
* Board identification
*/
-u32 get_efika_rev(void)
+u32 get_efikamx_rev(void)
{
u32 rev = 0;
/*
@@ -97,6 +100,31 @@ u32 get_efika_rev(void)
return (~rev & 0x7) + 1;
}
+inline u32 get_efikasb_rev(void)
+{
+ u32 rev = 0;
+
+ mxc_request_iomux(MX51_PIN_EIM_CS3, IOMUX_CONFIG_GPIO);
+ mxc_iomux_set_pad(MX51_PIN_EIM_CS3, PAD_CTL_100K_PU);
+ gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_EIM_CS3));
+ rev |= (!!gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_EIM_CS3))) << 0;
+
+ mxc_request_iomux(MX51_PIN_EIM_CS4, IOMUX_CONFIG_GPIO);
+ mxc_iomux_set_pad(MX51_PIN_EIM_CS4, PAD_CTL_100K_PU);
+ gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_EIM_CS4));
+ rev |= (!!gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_EIM_CS4))) << 1;
+
+ return rev;
+}
+
+inline uint32_t get_efika_rev(void)
+{
+ if (machine_is_efikamx())
+ return get_efikamx_rev();
+ else
+ return get_efikasb_rev();
+}
+
u32 get_board_rev(void)
{
return get_cpu_rev() | (get_efika_rev() << 8);
@@ -268,25 +296,36 @@ struct fsl_esdhc_cfg esdhc_cfg[2] = {
{MMC_SDHC2_BASE_ADDR, 1},
};
+static inline uint32_t efika_mmc_cd(void)
+{
+ if (machine_is_efikamx())
+ return MX51_PIN_GPIO1_0;
+ else
+ return MX51_PIN_EIM_CS2;
+}
+
int board_mmc_getcd(u8 *absent, struct mmc *mmc)
{
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+ uint32_t cd = efika_mmc_cd();
if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
- *absent = gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_GPIO1_0));
+ *absent = gpio_get_value(IOMUX_TO_GPIO(cd));
else
*absent = gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_GPIO1_8));
return 0;
}
+
int board_mmc_init(bd_t *bis)
{
int ret;
+ uint32_t cd = efika_mmc_cd();
/* SDHC1 is used on all revisions, setup control pins first */
- mxc_request_iomux(MX51_PIN_GPIO1_0,
+ mxc_request_iomux(cd,
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
- mxc_iomux_set_pad(MX51_PIN_GPIO1_0,
+ mxc_iomux_set_pad(cd,
PAD_CTL_DRV_HIGH | PAD_CTL_HYS_ENABLE |
PAD_CTL_PUE_KEEPER | PAD_CTL_100K_PU |
PAD_CTL_ODE_OPENDRAIN_NONE |
@@ -298,11 +337,12 @@ int board_mmc_init(bd_t *bis)
PAD_CTL_100K_PU | PAD_CTL_ODE_OPENDRAIN_NONE |
PAD_CTL_SRE_FAST);
- gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_GPIO1_0));
+ gpio_direction_input(IOMUX_TO_GPIO(cd));
gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_GPIO1_1));
/* Internal SDHC1 IOMUX + SDHC2 IOMUX on old boards */
- if (get_efika_rev() < EFIKAMX_BOARD_REV_12) {
+ if (machine_is_efikasb() || (machine_is_efikamx() &&
+ (get_efika_rev() < EFIKAMX_BOARD_REV_12))) {
/* SDHC1 IOMUX */
mxc_request_iomux(MX51_PIN_SD1_CMD,
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
@@ -414,6 +454,7 @@ int board_mmc_init(bd_t *bis)
ret = fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
}
+
return ret;
}
#endif
@@ -493,27 +534,44 @@ static inline void setup_iomux_ata(void) { }
*/
void setup_iomux_led(void)
{
- /* Blue LED */
- mxc_request_iomux(MX51_PIN_CSI1_D9, IOMUX_CONFIG_ALT3);
- gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSI1_D9), 0);
-
- /* Green LED */
- mxc_request_iomux(MX51_PIN_CSI1_VSYNC, IOMUX_CONFIG_ALT3);
- gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSI1_VSYNC), 0);
-
- /* Red LED */
- mxc_request_iomux(MX51_PIN_CSI1_HSYNC, IOMUX_CONFIG_ALT3);
- gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSI1_HSYNC), 0);
+ if (machine_is_efikamx()) {
+ /* Blue LED */
+ mxc_request_iomux(MX51_PIN_CSI1_D9, IOMUX_CONFIG_ALT3);
+ gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSI1_D9), 0);
+
+ /* Green LED */
+ mxc_request_iomux(MX51_PIN_CSI1_VSYNC, IOMUX_CONFIG_ALT3);
+ gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSI1_VSYNC), 0);
+
+ /* Red LED */
+ mxc_request_iomux(MX51_PIN_CSI1_HSYNC, IOMUX_CONFIG_ALT3);
+ gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSI1_HSYNC), 0);
+ } else {
+ /* CAPS-LOCK LED */
+ mxc_request_iomux(MX51_PIN_EIM_CS0, IOMUX_CONFIG_GPIO);
+ gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_EIM_CS0), 0);
+
+ /* ALARM-LED LED */
+ mxc_request_iomux(MX51_PIN_GPIO1_3, IOMUX_CONFIG_GPIO);
+ gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_GPIO1_3), 0);
+ }
}
void efikamx_toggle_led(uint32_t mask)
{
- gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_CSI1_D9),
- mask & EFIKAMX_LED_BLUE);
- gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_CSI1_VSYNC),
- mask & EFIKAMX_LED_GREEN);
- gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_CSI1_HSYNC),
- mask & EFIKAMX_LED_RED);
+ if (machine_is_efikamx()) {
+ gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_CSI1_D9),
+ mask & EFIKAMX_LED_BLUE);
+ gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_CSI1_VSYNC),
+ mask & EFIKAMX_LED_GREEN);
+ gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_CSI1_HSYNC),
+ mask & EFIKAMX_LED_RED);
+ } else {
+ gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_EIM_CS0),
+ mask & EFIKAMX_LED_BLUE);
+ gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_GPIO1_3),
+ !(mask & EFIKAMX_LED_GREEN));
+ }
}
/*
@@ -607,7 +665,6 @@ int board_early_init_f(void)
int board_init(void)
{
- gd->bd->bi_arch_number = MACH_TYPE_MX51_EFIKAMX;
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
return 0;
@@ -629,7 +686,24 @@ int board_late_init(void)
int checkboard(void)
{
- puts("Board: Efika MX\n");
+ u32 rev = get_efika_rev();
+
+ if (machine_is_efikamx()) {
+ printf("Board: Efika MX, rev1.%i\n", rev & 0xf);
+ return 0;
+ } else {
+ switch (rev) {
+ case EFIKASB_BOARD_REV_13:
+ printf("Board: Efika SB rev1.3\n");
+ break;
+ case EFIKASB_BOARD_REV_20:
+ printf("Board: Efika SB rev2.0\n");
+ break;
+ default:
+ printf("Board: Efika SB, rev Unknown\n");
+ break;
+ }
+ }
return 0;
}
diff --git a/board/efikamx/imximage.cfg b/board/efikamx/imximage_mx.cfg
index 6fe0ff9..6fe0ff9 100644
--- a/board/efikamx/imximage.cfg
+++ b/board/efikamx/imximage_mx.cfg
diff --git a/board/efikamx/imximage_sb.cfg b/board/efikamx/imximage_sb.cfg
new file mode 100644
index 0000000..878146f
--- /dev/null
+++ b/board/efikamx/imximage_sb.cfg
@@ -0,0 +1,122 @@
+#
+# Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
+#
+# BASED ON: imx51evk
+#
+# (C) Copyright 2009
+# Stefano Babic DENX Software Engineering sbabic@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not write to the Free Software
+# Foundation Inc. 51 Franklin Street Fifth Floor Boston,
+# MA 02110-1301 USA
+#
+# Refer docs/README.imxmage for more details about how-to configure
+# and create imximage boot image
+#
+# The syntax is taken as close as possible with the kwbimage
+
+# Boot Device : one of
+# spi, sd (the board has no nand neither onenand)
+BOOT_FROM spi
+
+# Device Configuration Data (DCD)
+#
+# Each entry must have the format:
+# Addr-type Address Value
+#
+# where:
+# Addr-type register length (1,2 or 4 bytes)
+# Address absolute address of the register
+# value value to be stored in the register
+
+# Setting IOMUXC
+DATA 4 0x73fa88a0 0x200
+DATA 4 0x73fa850c 0x20c3
+DATA 4 0x73fa8510 0x20c3
+DATA 4 0x73fa883c 0x2
+DATA 4 0x73fa8848 0x2
+DATA 4 0x73fa84b8 0xe7
+DATA 4 0x73fa84bc 0x45
+DATA 4 0x73fa84c0 0x45
+DATA 4 0x73fa84c4 0x45
+DATA 4 0x73fa84c8 0x45
+DATA 4 0x73fa8820 0x0
+DATA 4 0x73fa84a4 0x5
+DATA 4 0x73fa84a8 0x5
+DATA 4 0x73fa84ac 0xe3
+DATA 4 0x73fa84b0 0xe3
+DATA 4 0x73fa84b4 0xe3
+DATA 4 0x73fa84cc 0xe3
+DATA 4 0x73fa84d0 0xe2
+
+DATA 4 0x73fa882c 0x4
+DATA 4 0x73fa88a4 0x4
+DATA 4 0x73fa88ac 0x4
+DATA 4 0x73fa88b8 0x4
+
+# Setting DDR for micron
+# 13 Rows, 10 Cols, 32 bit, SREF=4 Micron Model
+# CAS=3 BL=4
+# ESDCTL_ESDCTL0
+DATA 4 0x83fd9000 0x82a20000
+# ESDCTL_ESDCTL1
+DATA 4 0x83fd9008 0x82a20000
+# ESDCTL_ESDMISC
+DATA 4 0x83fd9010 0xcaaaf6d0
+# ESDCTL_ESDCFG0
+DATA 4 0x83fd9004 0x333574aa
+# ESDCTL_ESDCFG1
+DATA 4 0x83fd900c 0x333574aa
+
+# Init DRAM on CS0
+# ESDCTL_ESDSCR
+DATA 4 0x83fd9014 0x04008008
+DATA 4 0x83fd9014 0x0000801a
+DATA 4 0x83fd9014 0x0000801b
+DATA 4 0x83fd9014 0x00448019
+DATA 4 0x83fd9014 0x07328018
+DATA 4 0x83fd9014 0x04008008
+DATA 4 0x83fd9014 0x00008010
+DATA 4 0x83fd9014 0x00008010
+DATA 4 0x83fd9014 0x06328018
+DATA 4 0x83fd9014 0x03808019
+DATA 4 0x83fd9014 0x00408019
+DATA 4 0x83fd9014 0x00008000
+
+# Init DRAM on CS1
+DATA 4 0x83fd9014 0x0400800c
+DATA 4 0x83fd9014 0x0000801e
+DATA 4 0x83fd9014 0x0000801f
+DATA 4 0x83fd9014 0x0000801d
+DATA 4 0x83fd9014 0x0732801c
+DATA 4 0x83fd9014 0x0400800c
+DATA 4 0x83fd9014 0x00008014
+DATA 4 0x83fd9014 0x00008014
+DATA 4 0x83fd9014 0x0632801c
+DATA 4 0x83fd9014 0x0380801d
+DATA 4 0x83fd9014 0x0040801d
+DATA 4 0x83fd9014 0x00008004
+
+# Write to CTL0
+DATA 4 0x83fd9000 0xb2a20000
+# Write to CTL1
+DATA 4 0x83fd9008 0xb2a20000
+# ESDMISC
+DATA 4 0x83fd9010 0xcaaaf6d0
+#ESDCTL_ESDCDLYGD
+DATA 4 0x83fd9034 0x90000000
+DATA 4 0x83fd9014 0x00000000
diff --git a/board/freescale/mx25pdk/Makefile b/board/freescale/mx25pdk/Makefile
new file mode 100644
index 0000000..4d45ae3
--- /dev/null
+++ b/board/freescale/mx25pdk/Makefile
@@ -0,0 +1,49 @@
+#
+# Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
+#
+# (C) Copyright 2011 Freescale Semiconductor, Inc.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS := mx25pdk.o
+SOBJS := lowlevel_init.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/freescale/mx25pdk/imximage.cfg b/board/freescale/mx25pdk/imximage.cfg
new file mode 100644
index 0000000..f7af7ff
--- /dev/null
+++ b/board/freescale/mx25pdk/imximage.cfg
@@ -0,0 +1,73 @@
+#
+# (C) Copyright 2009
+# Stefano Babic DENX Software Engineering sbabic@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# Refer docs/README.imxmage for more details about how-to configure
+# and create imximage boot image
+#
+# The syntax is taken as close as possible with the kwbimage
+
+# Boot Device : one of
+# spi, sd (the board has no nand neither onenand)
+
+BOOT_FROM sd
+
+# Device Configuration Data (DCD)
+#
+# Each entry must have the format:
+# Addr-type Address Value
+#
+# where:
+# Addr-type register length (1,2 or 4 bytes)
+# Address absolute address of the register
+# value value to be stored in the register
+
+# EIM config-CS5 init -- CPLD
+DATA 4 0xB8002050 0x0000D843
+DATA 4 0xB8002054 0x22252521
+DATA 4 0xB8002058 0x22220A00
+
+# DDR2 init
+DATA 4 0xB8001004 0x0076E83A
+DATA 4 0xB8001010 0x00000204
+DATA 4 0xB8001000 0x92210000
+DATA 4 0x80000f00 0x12344321
+DATA 4 0xB8001000 0xB2210000
+DATA 1 0x82000000 0xda
+DATA 1 0x83000000 0xda
+DATA 1 0x81000400 0xda
+DATA 1 0x80000333 0xda
+
+DATA 4 0xB8001000 0x92210000
+DATA 1 0x80000400 0x12345678
+
+DATA 4 0xB8001000 0xA2210000
+DATA 4 0x80000000 0x87654321
+DATA 4 0x80000000 0x87654321
+
+DATA 4 0xB8001000 0xB2210000
+DATA 1 0x80000233 0xda
+DATA 1 0x81000780 0xda
+DATA 1 0x81000400 0xda
+DATA 4 0xB8001000 0x82216080
+DATA 4 0x43FAC454 0x00001000
+
+DATA 4 0x53F80008 0x20034000
+
+# Enable the clocks
+DATA 4 0x53f8000c 0x1fffffff
+DATA 4 0x53f80010 0xffffffff
+DATA 4 0x53f80014 0xfdfff
diff --git a/board/freescale/mx25pdk/lowlevel_init.S b/board/freescale/mx25pdk/lowlevel_init.S
new file mode 100644
index 0000000..6e6810f
--- /dev/null
+++ b/board/freescale/mx25pdk/lowlevel_init.S
@@ -0,0 +1,21 @@
+/*
+ * Copyright (c) 2011 Freescale Semiconductor
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+.globl lowlevel_init
+lowlevel_init:
+
+ mov pc, lr
diff --git a/board/freescale/mx25pdk/mx25pdk.c b/board/freescale/mx25pdk/mx25pdk.c
new file mode 100644
index 0000000..4a8352f
--- /dev/null
+++ b/board/freescale/mx25pdk/mx25pdk.c
@@ -0,0 +1,56 @@
+/*
+ * (C) Copyright 2011 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/imx25-pinmux.h>
+#include <asm/arch/sys_proto.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int dram_init(void)
+{
+ /* dram_init must store complete ramsize in gd->ram_size */
+ gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
+ PHYS_SDRAM_1_SIZE);
+ return 0;
+}
+
+int board_early_init_f(void)
+{
+ mx25_uart1_init_pins();
+
+ return 0;
+}
+
+int board_init(void)
+{
+ /* address of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ puts("Board: MX25PDK\n");
+
+ return 0;
+}
diff --git a/board/freescale/mx31ads/mx31ads.c b/board/freescale/mx31ads/mx31ads.c
index 7637c92..4dd1e63 100644
--- a/board/freescale/mx31ads/mx31ads.c
+++ b/board/freescale/mx31ads/mx31ads.c
@@ -36,12 +36,6 @@ int dram_init(void)
return 0;
}
-void dram_init_banksize(void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-}
-
int board_early_init_f(void)
{
int i;
@@ -105,7 +99,6 @@ int board_early_init_f(void)
int board_init(void)
{
- gd->bd->bi_arch_number = MACH_TYPE_MX31ADS; /* board id for linux */
gd->bd->bi_boot_params = 0x80000100; /* adress of boot parameters */
return 0;
diff --git a/board/freescale/mx31pdk/mx31pdk.c b/board/freescale/mx31pdk/mx31pdk.c
index f6e190a..276d451 100644
--- a/board/freescale/mx31pdk/mx31pdk.c
+++ b/board/freescale/mx31pdk/mx31pdk.c
@@ -47,12 +47,6 @@ int dram_init(void)
return 0;
}
-void dram_init_banksize(void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-}
-
int board_early_init_f(void)
{
/* CS5: CPLD incl. network controller */
@@ -69,7 +63,6 @@ int board_early_init_f(void)
int board_init(void)
{
- gd->bd->bi_arch_number = MACH_TYPE_MX31_3DS; /* board id for linux */
/* adress of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c
index 94ea1f2..8da1ee8 100644
--- a/board/freescale/mx51evk/mx51evk.c
+++ b/board/freescale/mx51evk/mx51evk.c
@@ -403,7 +403,6 @@ int board_init(void)
{
system_rev = get_cpu_rev();
- gd->bd->bi_arch_number = MACH_TYPE_MX51_BABBAGE;
/* address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
diff --git a/board/freescale/mx53ard/mx53ard.c b/board/freescale/mx53ard/mx53ard.c
index 6e3360b..c89da13 100644
--- a/board/freescale/mx53ard/mx53ard.c
+++ b/board/freescale/mx53ard/mx53ard.c
@@ -278,7 +278,6 @@ int board_early_init_f(void)
int board_init(void)
{
- gd->bd->bi_arch_number = MACH_TYPE_MX53_ARD;
/* address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
diff --git a/board/freescale/mx53evk/mx53evk.c b/board/freescale/mx53evk/mx53evk.c
index 81857ff..fd821c0 100644
--- a/board/freescale/mx53evk/mx53evk.c
+++ b/board/freescale/mx53evk/mx53evk.c
@@ -355,7 +355,6 @@ int board_early_init_f(void)
int board_init(void)
{
- gd->bd->bi_arch_number = MACH_TYPE_MX53_EVK;
/* address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c
index ade1006..156f8b5 100644
--- a/board/freescale/mx53loco/mx53loco.c
+++ b/board/freescale/mx53loco/mx53loco.c
@@ -288,7 +288,6 @@ int board_early_init_f(void)
int board_init(void)
{
- gd->bd->bi_arch_number = MACH_TYPE_MX53_LOCO;
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
return 0;
diff --git a/board/freescale/mx53smd/mx53smd.c b/board/freescale/mx53smd/mx53smd.c
index 4a7ee55..776784f 100644
--- a/board/freescale/mx53smd/mx53smd.c
+++ b/board/freescale/mx53smd/mx53smd.c
@@ -214,7 +214,6 @@ int board_early_init_f(void)
int board_init(void)
{
- gd->bd->bi_arch_number = MACH_TYPE_MX53_SMD;
/* address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
diff --git a/board/isee/igep0020/igep0020.c b/board/isee/igep0020/igep0020.c
index 2279cc0..6a3777e 100644
--- a/board/isee/igep0020/igep0020.c
+++ b/board/isee/igep0020/igep0020.c
@@ -29,6 +29,7 @@
#include <asm/arch/mmc_host_def.h>
#include <asm/arch/mux.h>
#include <asm/arch/sys_proto.h>
+#include <asm/arch/omap_gpmc.h>
#include <asm/mach-types.h>
#include "igep0020.h"
diff --git a/board/isee/igep0020/igep0020.h b/board/isee/igep0020/igep0020.h
index c08d758..3d6e15f 100644
--- a/board/isee/igep0020/igep0020.h
+++ b/board/isee/igep0020/igep0020.h
@@ -29,15 +29,6 @@ const omap3_sysinfo sysinfo = {
"ONENAND",
};
-/* GPMC CS 5 connected to an SMSC LAN9221 ethernet controller */
-#define NET_LAN9221_GPMC_CONFIG1 0x00001000
-#define NET_LAN9221_GPMC_CONFIG2 0x00080701
-#define NET_LAN9221_GPMC_CONFIG3 0x00020201
-#define NET_LAN9221_GPMC_CONFIG4 0x08030703
-#define NET_LAN9221_GPMC_CONFIG5 0x00060908
-#define NET_LAN9221_GPMC_CONFIG6 0x87030000
-#define NET_LAN9221_GPMC_CONFIG7 0x00000f6c
-
static void setup_net_chip(void);
/*
diff --git a/board/karo/tx25/tx25.c b/board/karo/tx25/tx25.c
index ce75468..307ffd0 100644
--- a/board/karo/tx25/tx25.c
+++ b/board/karo/tx25/tx25.c
@@ -29,6 +29,7 @@
#include <asm/arch/imx-regs.h>
#include <asm/arch/imx25-pinmux.h>
#include <asm/gpio.h>
+#include <asm/arch/sys_proto.h>
static void mdelay(int n)
{
@@ -142,8 +143,6 @@ void tx25_fec_init(void)
int board_init()
{
#ifdef CONFIG_MXC_UART
- extern void mx25_uart1_init_pins(void);
-
mx25_uart1_init_pins();
#endif
/* board id for linux */
diff --git a/board/logicpd/imx31_litekit/imx31_litekit.c b/board/logicpd/imx31_litekit/imx31_litekit.c
index 09cc9c5..7214008 100644
--- a/board/logicpd/imx31_litekit/imx31_litekit.c
+++ b/board/logicpd/imx31_litekit/imx31_litekit.c
@@ -37,12 +37,6 @@ int dram_init(void)
return 0;
}
-void dram_init_banksize(void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-}
-
int board_early_init_f(void)
{
__REG(CSCR_U(0)) = 0x0000cf03; /* CS0: Nor Flash */
@@ -76,7 +70,6 @@ int board_early_init_f(void)
int board_init(void)
{
- gd->bd->bi_arch_number = MACH_TYPE_MX31LITE; /* board id for linux */
gd->bd->bi_boot_params = (0x80000100); /* adress of boot parameters */
return 0;
diff --git a/board/overo/overo.c b/board/overo/overo.c
index 4bbe1b8..850dfee 100644
--- a/board/overo/overo.c
+++ b/board/overo/overo.c
@@ -36,6 +36,7 @@
#include <asm/arch/mux.h>
#include <asm/arch/mem.h>
#include <asm/arch/sys_proto.h>
+#include <asm/arch/omap_gpmc.h>
#include <asm/gpio.h>
#include <asm/mach-types.h>
#include "overo.h"
diff --git a/board/overo/overo.h b/board/overo/overo.h
index 68e1243..d394f90 100644
--- a/board/overo/overo.h
+++ b/board/overo/overo.h
@@ -33,15 +33,6 @@ const omap3_sysinfo sysinfo = {
#endif
};
-/* GPMC CS 5 connected to an SMSC LAN9221 ethernet controller */
-#define NET_LAN9221_GPMC_CONFIG1 0x00001000
-#define NET_LAN9221_GPMC_CONFIG2 0x00080701
-#define NET_LAN9221_GPMC_CONFIG3 0x00020201
-#define NET_LAN9221_GPMC_CONFIG4 0x08030703
-#define NET_LAN9221_GPMC_CONFIG5 0x00060908
-#define NET_LAN9221_GPMC_CONFIG6 0x87030000
-#define NET_LAN9221_GPMC_CONFIG7 0x00000f6c
-
/*
* IEN - Input Enable
* IDIS - Input Disable
@@ -128,7 +119,7 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(GPMC_NCS6), (IEN | PTD | DIS | M0)) /*GPMC_nCS6*/\
MUX_VAL(CP(GPMC_NCS7), (IEN | PTU | EN | M0)) /*GPMC_nCS7*/\
MUX_VAL(CP(GPMC_NBE1), (IEN | PTD | DIS | M0)) /*GPMC_nCS3*/\
- MUX_VAL(CP(GPMC_CLK), (IDIS | PTU | EN | M0)) /*GPMC_CLK*/\
+ MUX_VAL(CP(GPMC_CLK), (IEN | PTU | EN | M0)) /*GPMC_CLK*/\
MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\
MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\
MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\
diff --git a/board/syteco/zmx25/zmx25.c b/board/syteco/zmx25/zmx25.c
index 893adc6..a89ee1a 100644
--- a/board/syteco/zmx25/zmx25.c
+++ b/board/syteco/zmx25/zmx25.c
@@ -117,8 +117,6 @@ int board_init()
writel(input_select1, &inputselect->i2c3_ipp_sda_in); /* I2C3 SDA */
writel(input_select2, &inputselect->i2c3_ipp_scl_in); /* I2C3 SCL */
- /* board id for linux */
- gd->bd->bi_arch_number = MACH_TYPE_ZMX25;
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
return 0;
@@ -188,9 +186,3 @@ int dram_init(void)
PHYS_SDRAM_SIZE);
return 0;
}
-
-void dram_init_banksize(void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM;
- gd->bd->bi_dram[0].size = gd->ram_size;
-}
diff --git a/board/timll/devkit8000/devkit8000.c b/board/timll/devkit8000/devkit8000.c
index 533af5a..f50d113 100644
--- a/board/timll/devkit8000/devkit8000.c
+++ b/board/timll/devkit8000/devkit8000.c
@@ -128,7 +128,7 @@ int board_mmc_init(bd_t *bis)
}
#endif
-#ifdef CONFIG_DRIVER_DM9000
+#if defined(CONFIG_DRIVER_DM9000) & !defined(CONFIG_SPL_BUILD)
/*
* Routine: board_eth_init
* Description: Setting up the Ethernet hardware.
diff --git a/board/ttcontrol/vision2/vision2.c b/board/ttcontrol/vision2/vision2.c
index 17a2558..ebca7b6 100644
--- a/board/ttcontrol/vision2/vision2.c
+++ b/board/ttcontrol/vision2/vision2.c
@@ -653,7 +653,6 @@ void lcd_enable(void)
int board_init(void)
{
- gd->bd->bi_arch_number = MACH_TYPE_TTC_VISION2; /* board id for linux */
/* address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
diff --git a/boards.cfg b/boards.cfg
index d32ff7e..0af96f5 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -144,6 +144,8 @@ rd6281a arm arm926ejs - Marvell
sheevaplug arm arm926ejs - Marvell kirkwood
dockstar arm arm926ejs - Seagate kirkwood
jadecpu arm arm926ejs jadecpu syteco mb86r0x
+mx25pdk arm arm926ejs mx25pdk freescale mx25 mx25pdk:IMX_CONFIG=board/freescale/mx25pdk/imximage.cfg
+tx25 arm arm926ejs tx25 karo mx25
zmx25 arm arm926ejs zmx25 syteco mx25
imx27lite arm arm926ejs imx27lite logicpd mx27
magnesium arm arm926ejs imx27lite logicpd mx27
@@ -155,7 +157,8 @@ dkb arm arm926ejs - Marvell pantheon
integratorap_cm946es arm arm946es integrator armltd - integratorap
integratorcp_cm946es arm arm946es integrator armltd - integratorcp
ca9x4_ct_vxp arm armv7 vexpress armltd
-efikamx arm armv7 efikamx - mx5 efikamx:IMX_CONFIG=board/efikamx/imximage.cfg
+efikamx arm armv7 efikamx - mx5 efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKAMX,IMX_CONFIG=board/efikamx/imximage_mx.cfg
+efikasb arm armv7 efikamx - mx5 efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKASB,IMX_CONFIG=board/efikamx/imximage_sb.cfg
mx51evk arm armv7 mx51evk freescale mx5 mx51evk:IMX_CONFIG=board/freescale/mx51evk/imximage.cfg
mx53ard arm armv7 mx53ard freescale mx5 mx53ard:IMX_CONFIG=board/freescale/mx53ard/imximage_dd3.cfg
mx53evk arm armv7 mx53evk freescale mx5 mx53evk:IMX_CONFIG=board/freescale/mx53evk/imximage.cfg
diff --git a/doc/README.SPL b/doc/README.SPL
index 30624a5..d53ef9c 100644
--- a/doc/README.SPL
+++ b/doc/README.SPL
@@ -60,3 +60,5 @@ CONFIG_SPL_SPI_FLASH_SUPPORT (drivers/mtd/spi/libspi_flash.o)
CONFIG_SPL_SPI_SUPPORT (drivers/spi/libspi.o)
CONFIG_SPL_FAT_SUPPORT (fs/fat/libfat.o)
CONFIG_SPL_LIBGENERIC_SUPPORT (lib/libgeneric.o)
+CONFIG_SPL_POWER_SUPPORT (drivers/power/libpower.o)
+CONFIG_SPL_NAND_SUPPORT (drivers/mtd/nand/libnand.o)
diff --git a/doc/README.davinci b/doc/README.davinci
index 0204372..5f1bdc8 100644
--- a/doc/README.davinci
+++ b/doc/README.davinci
@@ -139,3 +139,12 @@ http://www.spectrumdigital.com/product_info.php?cPath=37&products_id=214
7) TI DA850 EVM
http://focus.ti.com/docs/prod/folders/print/omap-l138.html
http://www.logicpd.com/products/development-kits/zoom-omap-l138-evm-development-kit
+
+Davinci special defines
+=======================
+
+CONFIG_SYS_DV_NOR_BOOT_CFG: AM18xx based boards, booting in NOR Boot mode
+ need a "NOR Boot Configuration Word" stored
+ in the NOR Flash. This define adds this.
+ More Info about this, see:
+ spraba5a.pdf chapter 3.1
diff --git a/drivers/block/mxc_ata.c b/drivers/block/mxc_ata.c
index f22f4f4..35bc656 100644
--- a/drivers/block/mxc_ata.c
+++ b/drivers/block/mxc_ata.c
@@ -96,7 +96,6 @@ static uint16_t pio_tA[NR_PIO_SPECS] = { 50, 50, 50, 50, 50 };
#define REG2OFF(reg) ((((uint32_t)reg) & 0x3) * 8)
static void set_ata_bus_timing(unsigned char mode)
{
- uint32_t val;
uint32_t T = 1000000000 / mxc_get_clock(MXC_IPG_CLK);
struct mxc_ata_config_regs *ata_regs;
@@ -106,22 +105,19 @@ static void set_ata_bus_timing(unsigned char mode)
return;
/* Write TIME_OFF/ON/1/2W */
- val = (3 << REG2OFF(&ata_regs->time_off)) |
- (3 << REG2OFF(&ata_regs->time_on)) |
- (((pio_t1[mode] + T) / T) << REG2OFF(&ata_regs->time_1)) |
- (((pio_t2_8[mode] + T) / T) << REG2OFF(&ata_regs->time_2w));
- writel(val, &ata_regs->time_off);
+ writeb(3, &ata_regs->time_off);
+ writeb(3, &ata_regs->time_on);
+ writeb((pio_t1[mode] + T) / T, &ata_regs->time_1);
+ writeb((pio_t2_8[mode] + T) / T, &ata_regs->time_2w);
/* Write TIME_2R/AX/RDX/4 */
- val = (((pio_t2_8[mode] + T) / T) << REG2OFF(&ata_regs->time_2r)) |
- (((pio_tA[mode] + T) / T + 2) << REG2OFF(&ata_regs->time_ax)) |
- (1 << REG2OFF(&ata_regs->time_pio_rdx)) |
- (((pio_t4[mode] + T) / T) << REG2OFF(&ata_regs->time_4));
- writel(val, &ata_regs->time_2r);
+ writeb((pio_t2_8[mode] + T) / T, &ata_regs->time_2r);
+ writeb((pio_tA[mode] + T) / T + 2, &ata_regs->time_ax);
+ writeb(1, &ata_regs->time_pio_rdx);
+ writeb((pio_t4[mode] + T) / T, &ata_regs->time_4);
/* Write TIME_9 ; the rest of timing registers is irrelevant for PIO */
- val = (((pio_t9[mode] + T) / T) << REG2OFF(&ata_regs->time_9));
- writel(val, &ata_regs->time_9);
+ writeb((pio_t9[mode] + T) / T, &ata_regs->time_9);
}
int ide_preinit(void)
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 62ec97d..beca1da 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -27,6 +27,7 @@ LIB := $(obj)libgpio.o
COBJS-$(CONFIG_AT91_GPIO) += at91_gpio.o
COBJS-$(CONFIG_KIRKWOOD_GPIO) += kw_gpio.o
+COBJS-$(CONFIG_MARVELL_GPIO) += mvgpio.o
COBJS-$(CONFIG_MARVELL_MFP) += mvmfp.o
COBJS-$(CONFIG_MXC_GPIO) += mxc_gpio.o
COBJS-$(CONFIG_PCA953X) += pca953x.o
diff --git a/drivers/gpio/mvgpio.c b/drivers/gpio/mvgpio.c
new file mode 100644
index 0000000..276f206
--- /dev/null
+++ b/drivers/gpio/mvgpio.c
@@ -0,0 +1,115 @@
+/*
+ * (C) Copyright 2011
+ * eInfochips Ltd. <www.einfochips.com>
+ * Written-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
+ *
+ * (C) Copyright 2010
+ * Marvell Semiconductor <www.marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include "mvgpio.h"
+#include <asm/gpio.h>
+
+#ifndef MV_MAX_GPIO
+#define MV_MAX_GPIO 128
+#endif
+
+int gpio_request(int gp, const char *label)
+{
+ if (gp >= MV_MAX_GPIO) {
+ printf("%s: Invalid GPIO requested %d\n", __func__, gp);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+void gpio_free(int gp)
+{
+}
+
+void gpio_toggle_value(int gp)
+{
+ gpio_set_value(gp, !gpio_get_value(gp));
+}
+
+int gpio_direction_input(int gp)
+{
+ struct gpio_reg *gpio_reg_bank;
+
+ if (gp >= MV_MAX_GPIO) {
+ printf("%s: Invalid GPIO %d\n", __func__, gp);
+ return -EINVAL;
+ }
+
+ gpio_reg_bank = get_gpio_base(GPIO_TO_REG(gp));
+ writel(GPIO_TO_BIT(gp), &gpio_reg_bank->gcdr);
+ return 0;
+}
+
+int gpio_direction_output(int gp, int value)
+{
+ struct gpio_reg *gpio_reg_bank;
+
+ if (gp >= MV_MAX_GPIO) {
+ printf("%s: Invalid GPIO %d\n", __func__, gp);
+ return -EINVAL;
+ }
+
+ gpio_reg_bank = get_gpio_base(GPIO_TO_REG(gp));
+ writel(GPIO_TO_BIT(gp), &gpio_reg_bank->gsdr);
+ gpio_set_value(gp, value);
+ return 0;
+}
+
+int gpio_get_value(int gp)
+{
+ struct gpio_reg *gpio_reg_bank;
+ u32 gp_val;
+
+ if (gp >= MV_MAX_GPIO) {
+ printf("%s: Invalid GPIO %d\n", __func__, gp);
+ return -EINVAL;
+ }
+
+ gpio_reg_bank = get_gpio_base(GPIO_TO_REG(gp));
+ gp_val = readl(&gpio_reg_bank->gplr);
+
+ return GPIO_VAL(gp, gp_val);
+}
+
+void gpio_set_value(int gp, int value)
+{
+ struct gpio_reg *gpio_reg_bank;
+
+ if (gp >= MV_MAX_GPIO) {
+ printf("%s: Invalid GPIO %d\n", __func__, gp);
+ return;
+ }
+
+ gpio_reg_bank = get_gpio_base(GPIO_TO_REG(gp));
+ if (value)
+ writel(GPIO_TO_BIT(gp), &gpio_reg_bank->gpsr);
+ else
+ writel(GPIO_TO_BIT(gp), &gpio_reg_bank->gpcr);
+}
diff --git a/drivers/gpio/mvgpio.h b/drivers/gpio/mvgpio.h
new file mode 100644
index 0000000..9688797
--- /dev/null
+++ b/drivers/gpio/mvgpio.h
@@ -0,0 +1,74 @@
+/*
+ * (C) Copyright 2011
+ * eInfochips Ltd. <www.einfochips.com>
+ * Written-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
+ *
+ * (C) Copyright 2010
+ * Marvell Semiconductor <www.marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef __MVGPIO_H__
+#define __MVGPIO_H__
+
+#include <common.h>
+
+#ifdef CONFIG_SHEEVA_88SV331xV5
+/*
+ * GPIO Register map for SHEEVA 88SV331xV5
+ */
+struct gpio_reg {
+ u32 gplr; /* Pin Level Register - 0x0000 */
+ u32 pad0[2];
+ u32 gpdr; /* Pin Direction Register - 0x000C */
+ u32 pad1[2];
+ u32 gpsr; /* Pin Output Set Register - 0x0018 */
+ u32 pad2[2];
+ u32 gpcr; /* Pin Output Clear Register - 0x0024 */
+ u32 pad3[2];
+ u32 grer; /* Rising-Edge Detect Enable Register - 0x0030 */
+ u32 pad4[2];
+ u32 gfer; /* Falling-Edge Detect Enable Register - 0x003C */
+ u32 pad5[2];
+ u32 gedr; /* Edge Detect Status Register - 0x0048 */
+ u32 pad6[2];
+ u32 gsdr; /* Bitwise Set of GPIO Direction Register - 0x0054 */
+ u32 pad7[2];
+ u32 gcdr; /* Bitwise Clear of GPIO Direction Register - 0x0060 */
+ u32 pad8[2];
+ u32 gsrer; /* Bitwise Set of Rising-Edge Detect Enable
+ Register - 0x006C */
+ u32 pad9[2];
+ u32 gcrer; /* Bitwise Clear of Rising-Edge Detect Enable
+ Register - 0x0078 */
+ u32 pad10[2];
+ u32 gsfer; /* Bitwise Set of Falling-Edge Detect Enable
+ Register - 0x0084 */
+ u32 pad11[2];
+ u32 gcfer; /* Bitwise Clear of Falling-Edge Detect Enable
+ Register - 0x0090 */
+ u32 pad12[2];
+ u32 apmask; /* Bitwise Mask of Edge Detect Register - 0x009C */
+};
+#else
+#error "CPU core subversion not defined"
+#endif
+
+#endif /* __MVGPIO_H__ */
diff --git a/drivers/i2c/davinci_i2c.c b/drivers/i2c/davinci_i2c.c
index eee1cbd..5e3406d 100644
--- a/drivers/i2c/davinci_i2c.c
+++ b/drivers/i2c/davinci_i2c.c
@@ -119,6 +119,11 @@ void i2c_init(int speed, int slaveadd)
udelay(1000);
}
+int i2c_set_bus_speed(unsigned int speed)
+{
+ i2c_init(speed, CONFIG_SYS_I2C_SLAVE);
+ return 0;
+}
int i2c_probe(u_int8_t chip)
{
diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c
index ebde3c5..a805bf6 100644
--- a/drivers/i2c/mxc_i2c.c
+++ b/drivers/i2c/mxc_i2c.c
@@ -1,7 +1,15 @@
/*
- * i2c driver for Freescale mx31
+ * i2c driver for Freescale i.MX series
*
* (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ * (c) 2011 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on i2c-imx.c from linux kernel:
+ * Copyright (C) 2005 Torsten Koschorrek <koschorrek at synertronixx.de>
+ * Copyright (C) 2005 Matthias Blaschke <blaschke at synertronixx.de>
+ * Copyright (C) 2007 RightHand Technologies, Inc.
+ * Copyright (C) 2008 Darius Augulis <darius.augulis at teltonika.lt>
+ *
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -30,11 +38,13 @@
#include <asm/arch/clock.h>
#include <asm/arch/imx-regs.h>
-#define IADR 0x00
-#define IFDR 0x04
-#define I2CR 0x08
-#define I2SR 0x0c
-#define I2DR 0x10
+struct mxc_i2c_regs {
+ uint32_t iadr;
+ uint32_t ifdr;
+ uint32_t i2cr;
+ uint32_t i2sr;
+ uint32_t i2dr;
+};
#define I2CR_IEN (1 << 7)
#define I2CR_IIEN (1 << 6)
@@ -68,215 +78,361 @@
#endif
#define I2C_MAX_TIMEOUT 10000
-#define I2C_MAX_RETRIES 3
-static u16 div[] = { 30, 32, 36, 42, 48, 52, 60, 72, 80, 88, 104, 128, 144,
- 160, 192, 240, 288, 320, 384, 480, 576, 640, 768, 960,
- 1152, 1280, 1536, 1920, 2304, 2560, 3072, 3840};
+static u16 i2c_clk_div[50][2] = {
+ { 22, 0x20 }, { 24, 0x21 }, { 26, 0x22 }, { 28, 0x23 },
+ { 30, 0x00 }, { 32, 0x24 }, { 36, 0x25 }, { 40, 0x26 },
+ { 42, 0x03 }, { 44, 0x27 }, { 48, 0x28 }, { 52, 0x05 },
+ { 56, 0x29 }, { 60, 0x06 }, { 64, 0x2A }, { 72, 0x2B },
+ { 80, 0x2C }, { 88, 0x09 }, { 96, 0x2D }, { 104, 0x0A },
+ { 112, 0x2E }, { 128, 0x2F }, { 144, 0x0C }, { 160, 0x30 },
+ { 192, 0x31 }, { 224, 0x32 }, { 240, 0x0F }, { 256, 0x33 },
+ { 288, 0x10 }, { 320, 0x34 }, { 384, 0x35 }, { 448, 0x36 },
+ { 480, 0x13 }, { 512, 0x37 }, { 576, 0x14 }, { 640, 0x38 },
+ { 768, 0x39 }, { 896, 0x3A }, { 960, 0x17 }, { 1024, 0x3B },
+ { 1152, 0x18 }, { 1280, 0x3C }, { 1536, 0x3D }, { 1792, 0x3E },
+ { 1920, 0x1B }, { 2048, 0x3F }, { 2304, 0x1C }, { 2560, 0x1D },
+ { 3072, 0x1E }, { 3840, 0x1F }
+};
+
+static u8 clk_idx;
-static inline void i2c_reset(void)
-{
- writew(0, I2C_BASE + I2CR); /* Reset module */
- writew(0, I2C_BASE + I2SR);
- writew(I2CR_IEN, I2C_BASE + I2CR);
-}
-
-void i2c_init(int speed, int unused)
+/*
+ * Calculate and set proper clock divider
+ */
+static void i2c_imx_set_clk(unsigned int rate)
{
- int freq;
+ struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)I2C_BASE;
+ unsigned int i2c_clk_rate;
+ unsigned int div;
int i;
#if defined(CONFIG_MX31)
struct clock_control_regs *sc_regs =
(struct clock_control_regs *)CCM_BASE;
+
/* start the required I2C clock */
writel(readl(&sc_regs->cgr0) | (3 << I2C_CLK_OFFSET),
&sc_regs->cgr0);
#endif
- freq = mxc_get_clock(MXC_IPG_PERCLK);
- for (i = 0; i < 0x1f; i++)
- if (freq / div[i] <= speed)
- break;
+ /* Divider value calculation */
+ i2c_clk_rate = mxc_get_clock(MXC_IPG_PERCLK);
+ div = (i2c_clk_rate + rate - 1) / rate;
+ if (div < i2c_clk_div[0][0])
+ i = 0;
+ else if (div > i2c_clk_div[ARRAY_SIZE(i2c_clk_div) - 1][0])
+ i = ARRAY_SIZE(i2c_clk_div) - 1;
+ else
+ for (i = 0; i2c_clk_div[i][0] < div; i++)
+ ;
+
+ /* Store divider value */
+ clk_idx = i2c_clk_div[i][1];
+ writeb(clk_idx, &i2c_regs->ifdr);
+}
- debug("%s: speed: %d\n", __func__, speed);
+/*
+ * Reset I2C Controller
+ */
+void i2c_reset(void)
+{
+ struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)I2C_BASE;
+
+ writeb(0, &i2c_regs->i2cr); /* Reset module */
+ writeb(0, &i2c_regs->i2sr);
+}
- writew(i, I2C_BASE + IFDR);
+/*
+ * Init I2C Bus
+ */
+void i2c_init(int speed, int unused)
+{
+ i2c_imx_set_clk(speed);
i2c_reset();
}
-static int wait_idle(void)
+/*
+ * Wait for bus to be busy (or free if for_busy = 0)
+ *
+ * for_busy = 1: Wait for IBB to be asserted
+ * for_busy = 0: Wait for IBB to be de-asserted
+ */
+int i2c_imx_bus_busy(int for_busy)
{
+ struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)I2C_BASE;
+ unsigned int temp;
+
int timeout = I2C_MAX_TIMEOUT;
- while ((readw(I2C_BASE + I2SR) & I2SR_IBB) && --timeout) {
- writew(0, I2C_BASE + I2SR);
+ while (timeout--) {
+ temp = readb(&i2c_regs->i2sr);
+
+ if (for_busy && (temp & I2SR_IBB))
+ return 0;
+ if (!for_busy && !(temp & I2SR_IBB))
+ return 0;
+
udelay(1);
}
- return timeout ? timeout : (!(readw(I2C_BASE + I2SR) & I2SR_IBB));
+
+ return 1;
}
-static int wait_busy(void)
+/*
+ * Wait for transaction to complete
+ */
+int i2c_imx_trx_complete(void)
{
+ struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)I2C_BASE;
int timeout = I2C_MAX_TIMEOUT;
- while (!(readw(I2C_BASE + I2SR) & I2SR_IBB) && --timeout)
+ while (timeout--) {
+ if (readb(&i2c_regs->i2sr) & I2SR_IIF) {
+ writeb(0, &i2c_regs->i2sr);
+ return 0;
+ }
+
udelay(1);
- writew(0, I2C_BASE + I2SR); /* clear interrupt */
+ }
- return timeout;
+ return 1;
}
-static int wait_complete(void)
+/*
+ * Check if the transaction was ACKed
+ */
+int i2c_imx_acked(void)
{
- int timeout = I2C_MAX_TIMEOUT;
+ struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)I2C_BASE;
- while ((!(readw(I2C_BASE + I2SR) & I2SR_ICF)) && (--timeout)) {
- writew(0, I2C_BASE + I2SR);
- udelay(1);
- }
- udelay(200);
+ return readb(&i2c_regs->i2sr) & I2SR_RX_NO_AK;
+}
- writew(0, I2C_BASE + I2SR); /* clear interrupt */
+/*
+ * Start the controller
+ */
+int i2c_imx_start(void)
+{
+ struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)I2C_BASE;
+ unsigned int temp = 0;
+ int result;
- return timeout;
-}
+ writeb(clk_idx, &i2c_regs->ifdr);
+ /* Enable I2C controller */
+ writeb(0, &i2c_regs->i2sr);
+ writeb(I2CR_IEN, &i2c_regs->i2cr);
-static int tx_byte(u8 byte)
-{
- writew(byte, I2C_BASE + I2DR);
+ /* Wait controller to be stable */
+ udelay(50);
+
+ /* Start I2C transaction */
+ temp = readb(&i2c_regs->i2cr);
+ temp |= I2CR_MSTA;
+ writeb(temp, &i2c_regs->i2cr);
+
+ result = i2c_imx_bus_busy(1);
+ if (result)
+ return result;
+
+ temp |= I2CR_MTX | I2CR_TX_NO_AK;
+ writeb(temp, &i2c_regs->i2cr);
- if (!wait_complete() || readw(I2C_BASE + I2SR) & I2SR_RX_NO_AK)
- return -1;
return 0;
}
-static int rx_byte(int last)
+/*
+ * Stop the controller
+ */
+void i2c_imx_stop(void)
{
- if (!wait_complete())
- return -1;
+ struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)I2C_BASE;
+ unsigned int temp = 0;
+
+ /* Stop I2C transaction */
+ temp = readb(&i2c_regs->i2cr);
+ temp |= ~(I2CR_MSTA | I2CR_MTX);
+ writeb(temp, &i2c_regs->i2cr);
- if (last)
- writew(I2CR_IEN, I2C_BASE + I2CR);
+ i2c_imx_bus_busy(0);
- return readw(I2C_BASE + I2DR);
+ /* Disable I2C controller */
+ writeb(0, &i2c_regs->i2cr);
}
-int i2c_probe(uchar chip)
+/*
+ * Set chip address and access mode
+ *
+ * read = 1: READ access
+ * read = 0: WRITE access
+ */
+int i2c_imx_set_chip_addr(uchar chip, int read)
{
+ struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)I2C_BASE;
int ret;
- writew(0, I2C_BASE + I2CR); /* Reset module */
- writew(I2CR_IEN, I2C_BASE + I2CR);
+ writeb((chip << 1) | read, &i2c_regs->i2dr);
+
+ ret = i2c_imx_trx_complete();
+ if (ret)
+ return ret;
- writew(I2CR_IEN | I2CR_MSTA | I2CR_MTX, I2C_BASE + I2CR);
- ret = tx_byte(chip << 1);
- writew(I2CR_IEN | I2CR_MTX, I2C_BASE + I2CR);
+ ret = i2c_imx_acked();
+ if (ret)
+ return ret;
return ret;
}
-static int i2c_addr(uchar chip, uint addr, int alen)
+/*
+ * Write register address
+ */
+int i2c_imx_set_reg_addr(uint addr, int alen)
{
- int i, retry = 0;
- for (retry = 0; retry < 3; retry++) {
- if (wait_idle())
+ struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)I2C_BASE;
+ int ret;
+ int i;
+
+ for (i = 0; i < (8 * alen); i += 8) {
+ writeb((addr >> i) & 0xff, &i2c_regs->i2dr);
+
+ ret = i2c_imx_trx_complete();
+ if (ret)
break;
- i2c_reset();
- for (i = 0; i < I2C_MAX_TIMEOUT; i++)
- udelay(1);
- }
- if (retry >= I2C_MAX_RETRIES) {
- debug("%s:bus is busy(%x)\n",
- __func__, readw(I2C_BASE + I2SR));
- return -1;
- }
- writew(I2CR_IEN | I2CR_MSTA | I2CR_MTX, I2C_BASE + I2CR);
- if (!wait_busy()) {
- debug("%s:trigger start fail(%x)\n",
- __func__, readw(I2C_BASE + I2SR));
- return -1;
+ ret = i2c_imx_acked();
+ if (ret)
+ break;
}
- if (tx_byte(chip << 1) || (readw(I2C_BASE + I2SR) & I2SR_RX_NO_AK)) {
- debug("%s:chip address cycle fail(%x)\n",
- __func__, readw(I2C_BASE + I2SR));
- return -1;
- }
- while (alen--)
- if (tx_byte((addr >> (alen * 8)) & 0xff) ||
- (readw(I2C_BASE + I2SR) & I2SR_RX_NO_AK)) {
- debug("%s:device address cycle fail(%x)\n",
- __func__, readw(I2C_BASE + I2SR));
- return -1;
- }
- return 0;
+ return ret;
}
-int i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len)
+/*
+ * Try if a chip add given address responds (probe the chip)
+ */
+int i2c_probe(uchar chip)
{
- int timeout = I2C_MAX_TIMEOUT;
int ret;
- debug("%s chip: 0x%02x addr: 0x%04x alen: %d len: %d\n",
- __func__, chip, addr, alen, len);
+ ret = i2c_imx_start();
+ if (ret)
+ return ret;
- if (i2c_addr(chip, addr, alen)) {
- printf("i2c_addr failed\n");
- return -1;
- }
+ ret = i2c_imx_set_chip_addr(chip, 0);
+ if (ret)
+ return ret;
- writew(I2CR_IEN | I2CR_MSTA | I2CR_MTX | I2CR_RSTA, I2C_BASE + I2CR);
+ i2c_imx_stop();
- if (tx_byte(chip << 1 | 1))
- return -1;
+ return ret;
+}
- writew(I2CR_IEN | I2CR_MSTA |
- ((len == 1) ? I2CR_TX_NO_AK : 0),
- I2C_BASE + I2CR);
+/*
+ * Read data from I2C device
+ */
+int i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len)
+{
+ struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)I2C_BASE;
+ int ret;
+ unsigned int temp;
+ int i;
- ret = readw(I2C_BASE + I2DR);
+ ret = i2c_imx_start();
+ if (ret)
+ return ret;
+
+ /* write slave address */
+ ret = i2c_imx_set_chip_addr(chip, 0);
+ if (ret)
+ return ret;
+
+ ret = i2c_imx_set_reg_addr(addr, alen);
+ if (ret)
+ return ret;
+
+ temp = readb(&i2c_regs->i2cr);
+ temp |= I2CR_RSTA;
+ writeb(temp, &i2c_regs->i2cr);
+
+ ret = i2c_imx_set_chip_addr(chip, 1);
+ if (ret)
+ return ret;
+
+ /* setup bus to read data */
+ temp = readb(&i2c_regs->i2cr);
+ temp &= ~(I2CR_MTX | I2CR_TX_NO_AK);
+ if (len == 1)
+ temp |= I2CR_TX_NO_AK;
+ writeb(temp, &i2c_regs->i2cr);
+ readb(&i2c_regs->i2dr);
+
+ /* read data */
+ for (i = 0; i < len; i++) {
+ ret = i2c_imx_trx_complete();
+ if (ret)
+ return ret;
+
+ /*
+ * It must generate STOP before read I2DR to prevent
+ * controller from generating another clock cycle
+ */
+ if (i == (len - 1)) {
+ temp = readb(&i2c_regs->i2cr);
+ temp &= ~(I2CR_MSTA | I2CR_MTX);
+ writeb(temp, &i2c_regs->i2cr);
+ i2c_imx_bus_busy(0);
+ } else if (i == (len - 2)) {
+ temp = readb(&i2c_regs->i2cr);
+ temp |= I2CR_TX_NO_AK;
+ writeb(temp, &i2c_regs->i2cr);
+ }
- while (len--) {
- ret = rx_byte(len == 0);
- if (ret < 0)
- return -1;
- *buf++ = ret;
- if (len <= 1)
- writew(I2CR_IEN | I2CR_MSTA |
- I2CR_TX_NO_AK,
- I2C_BASE + I2CR);
+ buf[i] = readb(&i2c_regs->i2dr);
}
- writew(I2CR_IEN, I2C_BASE + I2CR);
-
- while (readw(I2C_BASE + I2SR) & I2SR_IBB && --timeout)
- udelay(1);
+ i2c_imx_stop();
- return 0;
+ return ret;
}
+/*
+ * Write data to I2C device
+ */
int i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len)
{
- int timeout = I2C_MAX_TIMEOUT;
- debug("%s chip: 0x%02x addr: 0x%04x alen: %d len: %d\n",
- __func__, chip, addr, alen, len);
+ struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)I2C_BASE;
+ int ret;
+ int i;
- if (i2c_addr(chip, addr, alen))
- return -1;
+ ret = i2c_imx_start();
+ if (ret)
+ return ret;
- while (len--)
- if (tx_byte(*buf++))
- return -1;
+ /* write slave address */
+ ret = i2c_imx_set_chip_addr(chip, 0);
+ if (ret)
+ return ret;
- writew(I2CR_IEN, I2C_BASE + I2CR);
+ ret = i2c_imx_set_reg_addr(addr, alen);
+ if (ret)
+ return ret;
- while (readw(I2C_BASE + I2SR) & I2SR_IBB && --timeout)
- udelay(1);
+ for (i = 0; i < len; i++) {
+ writeb(buf[i], &i2c_regs->i2dr);
- return 0;
-}
+ ret = i2c_imx_trx_complete();
+ if (ret)
+ return ret;
+
+ ret = i2c_imx_acked();
+ if (ret)
+ return ret;
+ }
+ i2c_imx_stop();
+
+ return ret;
+}
#endif /* CONFIG_HARD_I2C */
diff --git a/drivers/misc/fsl_pmic.c b/drivers/misc/fsl_pmic.c
index ef80ad9..23255a5 100644
--- a/drivers/misc/fsl_pmic.c
+++ b/drivers/misc/fsl_pmic.c
@@ -230,6 +230,6 @@ int do_pmic(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
U_BOOT_CMD(
pmic, CONFIG_SYS_MAXARGS, 1, do_pmic,
"Freescale PMIC (Atlas)",
- "dump [numregs] dump registers\n"
+ "dump [numregs] - dump registers\n"
"pmic write <reg> <value> - write register"
);
diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c
index ef12ecd..5d4cf51 100644
--- a/drivers/mmc/omap_hsmmc.c
+++ b/drivers/mmc/omap_hsmmc.c
@@ -28,6 +28,7 @@
#include <part.h>
#include <i2c.h>
#include <twl4030.h>
+#include <twl6030.h>
#include <asm/io.h>
#include <asm/arch/mmc_host_def.h>
#include <asm/arch/sys_proto.h>
@@ -38,7 +39,27 @@
static int mmc_read_data(hsmmc_t *mmc_base, char *buf, unsigned int size);
static int mmc_write_data(hsmmc_t *mmc_base, const char *buf, unsigned int siz);
static struct mmc hsmmc_dev[2];
-unsigned char mmc_board_init(hsmmc_t *mmc_base)
+
+#if defined(CONFIG_OMAP44XX) && defined(CONFIG_TWL6030_POWER)
+static void omap4_vmmc_pbias_config(struct mmc *mmc)
+{
+ u32 value = 0;
+ struct omap4_sys_ctrl_regs *const ctrl =
+ (struct omap4_sys_ctrl_regs *)SYSCTRL_GENERAL_CORE_BASE;
+
+
+ value = readl(&ctrl->control_pbiaslite);
+ value &= ~(MMC1_PBIASLITE_PWRDNZ | MMC1_PWRDNZ);
+ writel(value, &ctrl->control_pbiaslite);
+ /* set VMMC to 3V */
+ twl6030_power_mmc_init();
+ value = readl(&ctrl->control_pbiaslite);
+ value |= MMC1_PBIASLITE_VMODE | MMC1_PBIASLITE_PWRDNZ | MMC1_PWRDNZ;
+ writel(value, &ctrl->control_pbiaslite);
+}
+#endif
+
+unsigned char mmc_board_init(struct mmc *mmc)
{
#if defined(CONFIG_TWL4030_POWER)
twl4030_power_mmc_init();
@@ -67,7 +88,11 @@ unsigned char mmc_board_init(hsmmc_t *mmc_base)
&prcm_base->iclken1_core);
#endif
-/* TODO add appropriate OMAP4 init - none currently necessary */
+#if defined(CONFIG_OMAP44XX) && defined(CONFIG_TWL6030_POWER)
+ /* PBIAS config needed for MMC1 only */
+ if (mmc->block_dev.dev == 0)
+ omap4_vmmc_pbias_config(mmc);
+#endif
return 0;
}
@@ -108,7 +133,7 @@ static int mmc_init_setup(struct mmc *mmc)
unsigned int dsor;
ulong start;
- mmc_board_init(mmc_base);
+ mmc_board_init(mmc);
writel(readl(&mmc_base->sysconfig) | MMC_SOFTRESET,
&mmc_base->sysconfig);
@@ -461,7 +486,8 @@ int omap_mmc_init(int dev_index)
return 1;
}
mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
- mmc->host_caps = MMC_MODE_4BIT | MMC_MODE_HS_52MHz | MMC_MODE_HS;
+ mmc->host_caps = MMC_MODE_4BIT | MMC_MODE_HS_52MHz | MMC_MODE_HS |
+ MMC_MODE_HC;
mmc->f_min = 400000;
mmc->f_max = 52000000;
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 8b598f6..b6a7886 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -26,12 +26,18 @@ include $(TOPDIR)/config.mk
LIB := $(obj)libnand.o
ifdef CONFIG_CMD_NAND
+ifdef CONFIG_SPL_BUILD
+ifdef CONFIG_SPL_NAND_SIMPLE
+COBJS-y += nand_spl_simple.o
+endif
+else
COBJS-y += nand.o
-COBJS-y += nand_base.o
COBJS-y += nand_bbt.o
-COBJS-y += nand_ecc.o
COBJS-y += nand_ids.o
COBJS-y += nand_util.o
+endif
+COBJS-y += nand_ecc.o
+COBJS-y += nand_base.o
COBJS-$(CONFIG_NAND_ATMEL) += atmel_nand.o
COBJS-$(CONFIG_DRIVER_NAND_BFIN) += bfin_nand.o
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 1a95a91..e7dfcb1 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -213,7 +213,7 @@ static void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
*
* Default read function for 8bit buswith
*/
-static void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
{
int i;
struct nand_chip *chip = mtd->priv;
@@ -269,7 +269,7 @@ static void nand_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
*
* Default read function for 16bit buswith
*/
-static void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len)
+void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len)
{
int i;
struct nand_chip *chip = mtd->priv;
diff --git a/drivers/mtd/nand/nand_spl_simple.c b/drivers/mtd/nand/nand_spl_simple.c
new file mode 100644
index 0000000..71491d4
--- /dev/null
+++ b/drivers/mtd/nand/nand_spl_simple.c
@@ -0,0 +1,245 @@
+/*
+ * (C) Copyright 2006-2008
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <nand.h>
+#include <asm/io.h>
+
+static int nand_ecc_pos[] = CONFIG_SYS_NAND_ECCPOS;
+static nand_info_t mtd;
+static struct nand_chip nand_chip;
+
+#if (CONFIG_SYS_NAND_PAGE_SIZE <= 512)
+/*
+ * NAND command for small page NAND devices (512)
+ */
+static int nand_command(int block, int page, uint32_t offs,
+ u8 cmd)
+{
+ struct nand_chip *this = mtd.priv;
+ int page_addr = page + block * CONFIG_SYS_NAND_PAGE_COUNT;
+
+ while (!this->dev_ready(&mtd))
+ ;
+
+ /* Begin command latch cycle */
+ this->cmd_ctrl(&mtd, cmd, NAND_CTRL_CLE | NAND_CTRL_CHANGE);
+ /* Set ALE and clear CLE to start address cycle */
+ /* Column address */
+ this->cmd_ctrl(&mtd, offs, NAND_CTRL_ALE | NAND_CTRL_CHANGE);
+ this->cmd_ctrl(&mtd, page_addr & 0xff, NAND_CTRL_ALE); /* A[16:9] */
+ this->cmd_ctrl(&mtd, (page_addr >> 8) & 0xff,
+ NAND_CTRL_ALE); /* A[24:17] */
+#ifdef CONFIG_SYS_NAND_4_ADDR_CYCLE
+ /* One more address cycle for devices > 32MiB */
+ this->cmd_ctrl(&mtd, (page_addr >> 16) & 0x0f,
+ NAND_CTRL_ALE); /* A[28:25] */
+#endif
+ /* Latch in address */
+ this->cmd_ctrl(&mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
+
+ /*
+ * Wait a while for the data to be ready
+ */
+ while (!this->dev_ready(&mtd))
+ ;
+
+ return 0;
+}
+#else
+/*
+ * NAND command for large page NAND devices (2k)
+ */
+static int nand_command(int block, int page, uint32_t offs,
+ u8 cmd)
+{
+ struct nand_chip *this = mtd.priv;
+ int page_addr = page + block * CONFIG_SYS_NAND_PAGE_COUNT;
+ void (*hwctrl)(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl) = this->cmd_ctrl;
+
+ while (!this->dev_ready(&mtd))
+ ;
+
+ /* Emulate NAND_CMD_READOOB */
+ if (cmd == NAND_CMD_READOOB) {
+ offs += CONFIG_SYS_NAND_PAGE_SIZE;
+ cmd = NAND_CMD_READ0;
+ }
+
+ /* Shift the offset from byte addressing to word addressing. */
+ if (this->options & NAND_BUSWIDTH_16)
+ offs >>= 1;
+
+ /* Begin command latch cycle */
+ hwctrl(&mtd, cmd, NAND_CTRL_CLE | NAND_CTRL_CHANGE);
+ /* Set ALE and clear CLE to start address cycle */
+ /* Column address */
+ hwctrl(&mtd, offs & 0xff,
+ NAND_CTRL_ALE | NAND_CTRL_CHANGE); /* A[7:0] */
+ hwctrl(&mtd, (offs >> 8) & 0xff, NAND_CTRL_ALE); /* A[11:9] */
+ /* Row address */
+ hwctrl(&mtd, (page_addr & 0xff), NAND_CTRL_ALE); /* A[19:12] */
+ hwctrl(&mtd, ((page_addr >> 8) & 0xff),
+ NAND_CTRL_ALE); /* A[27:20] */
+#ifdef CONFIG_SYS_NAND_5_ADDR_CYCLE
+ /* One more address cycle for devices > 128MiB */
+ hwctrl(&mtd, (page_addr >> 16) & 0x0f,
+ NAND_CTRL_ALE); /* A[31:28] */
+#endif
+ /* Latch in address */
+ hwctrl(&mtd, NAND_CMD_READSTART,
+ NAND_CTRL_CLE | NAND_CTRL_CHANGE);
+ hwctrl(&mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
+
+ /*
+ * Wait a while for the data to be ready
+ */
+ while (!this->dev_ready(&mtd))
+ ;
+
+ return 0;
+}
+#endif
+
+static int nand_is_bad_block(int block)
+{
+ struct nand_chip *this = mtd.priv;
+
+ nand_command(block, 0, CONFIG_SYS_NAND_BAD_BLOCK_POS,
+ NAND_CMD_READOOB);
+
+ /*
+ * Read one byte (or two if it's a 16 bit chip).
+ */
+ if (this->options & NAND_BUSWIDTH_16) {
+ if (readw(this->IO_ADDR_R) != 0xffff)
+ return 1;
+ } else {
+ if (readb(this->IO_ADDR_R) != 0xff)
+ return 1;
+ }
+
+ return 0;
+}
+
+static int nand_read_page(int block, int page, void *dst)
+{
+ struct nand_chip *this = mtd.priv;
+ u_char *ecc_calc;
+ u_char *ecc_code;
+ u_char *oob_data;
+ int i;
+ int eccsize = CONFIG_SYS_NAND_ECCSIZE;
+ int eccbytes = CONFIG_SYS_NAND_ECCBYTES;
+ int eccsteps = CONFIG_SYS_NAND_ECCSTEPS;
+ uint8_t *p = dst;
+ int stat;
+
+ nand_command(block, page, 0, NAND_CMD_READ0);
+
+ /* No malloc available for now, just use some temporary locations
+ * in SDRAM
+ */
+ ecc_calc = (u_char *)(CONFIG_SYS_SDRAM_BASE + 0x10000);
+ ecc_code = ecc_calc + 0x100;
+ oob_data = ecc_calc + 0x200;
+
+ for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
+ this->ecc.hwctl(&mtd, NAND_ECC_READ);
+ this->read_buf(&mtd, p, eccsize);
+ this->ecc.calculate(&mtd, p, &ecc_calc[i]);
+ }
+ this->read_buf(&mtd, oob_data, CONFIG_SYS_NAND_OOBSIZE);
+
+ /* Pick the ECC bytes out of the oob data */
+ for (i = 0; i < CONFIG_SYS_NAND_ECCTOTAL; i++)
+ ecc_code[i] = oob_data[nand_ecc_pos[i]];
+
+ eccsteps = CONFIG_SYS_NAND_ECCSTEPS;
+ p = dst;
+
+ for (i = 0 ; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
+ /* No chance to do something with the possible error message
+ * from correct_data(). We just hope that all possible errors
+ * are corrected by this routine.
+ */
+ stat = this->ecc.correct(&mtd, p, &ecc_code[i], &ecc_calc[i]);
+ }
+
+ return 0;
+}
+
+int nand_spl_load_image(uint32_t offs, unsigned int size, void *dst)
+{
+ unsigned int block, lastblock;
+ unsigned int page;
+
+ /*
+ * offs has to be aligned to a page address!
+ */
+ block = offs / CONFIG_SYS_NAND_BLOCK_SIZE;
+ lastblock = (offs + size - 1) / CONFIG_SYS_NAND_BLOCK_SIZE;
+ page = (offs % CONFIG_SYS_NAND_BLOCK_SIZE) / CONFIG_SYS_NAND_PAGE_SIZE;
+
+ while (block <= lastblock) {
+ if (!nand_is_bad_block(block)) {
+ /*
+ * Skip bad blocks
+ */
+ while (page < CONFIG_SYS_NAND_PAGE_COUNT) {
+ nand_read_page(block, page, dst);
+ dst += CONFIG_SYS_NAND_PAGE_SIZE;
+ page++;
+ }
+
+ page = 0;
+ } else {
+ lastblock++;
+ }
+
+ block++;
+ }
+
+ return 0;
+}
+
+/* nand_init() - initialize data to make nand usable by SPL */
+void nand_init(void)
+{
+ /*
+ * Init board specific nand support
+ */
+ mtd.priv = &nand_chip;
+ nand_chip.IO_ADDR_R = nand_chip.IO_ADDR_W =
+ (void __iomem *)CONFIG_SYS_NAND_BASE;
+ nand_chip.options = 0;
+ board_nand_init(&nand_chip);
+
+ if (nand_chip.select_chip)
+ nand_chip.select_chip(&mtd, 0);
+}
+
+/* Unselect after operation */
+void nand_deselect(void)
+{
+ if (nand_chip.select_chip)
+ nand_chip.select_chip(&mtd, -1);
+}
diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c
index 99b9cef..5bbec48 100644
--- a/drivers/mtd/nand/omap_gpmc.c
+++ b/drivers/mtd/nand/omap_gpmc.c
@@ -61,6 +61,14 @@ static void omap_nand_hwcontrol(struct mtd_info *mtd, int32_t cmd,
writeb(cmd, this->IO_ADDR_W);
}
+#ifdef CONFIG_SPL_BUILD
+/* Check wait pin as dev ready indicator */
+int omap_spl_dev_ready(struct mtd_info *mtd)
+{
+ return gpmc_cfg->status & (1 << 8);
+}
+#endif
+
/*
* omap_hwecc_init - Initialize the Hardware ECC for NAND flash in
* GPMC controller
@@ -224,6 +232,7 @@ static void omap_enable_hwecc(struct mtd_info *mtd, int32_t mode)
}
}
+#ifndef CONFIG_SPL_BUILD
/*
* omap_nand_switch_ecc - switch the ECC operation b/w h/w ecc and s/w ecc.
* The default is to come up on s/w ecc
@@ -280,6 +289,7 @@ void omap_nand_switch_ecc(int32_t hardware)
nand->options &= ~NAND_OWN_BUFFERS;
}
+#endif /* CONFIG_SPL_BUILD */
/*
* Board-specific NAND initialization. The following members of the
@@ -338,7 +348,24 @@ int board_nand_init(struct nand_chip *nand)
nand->chip_delay = 100;
/* Default ECC mode */
+#ifndef CONFIG_SPL_BUILD
nand->ecc.mode = NAND_ECC_SOFT;
+#else
+ nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.layout = &hw_nand_oob;
+ nand->ecc.size = CONFIG_SYS_NAND_ECCSIZE;
+ nand->ecc.bytes = CONFIG_SYS_NAND_ECCBYTES;
+ nand->ecc.hwctl = omap_enable_hwecc;
+ nand->ecc.correct = omap_correct_data;
+ nand->ecc.calculate = omap_calculate_ecc;
+ omap_hwecc_init(nand);
+
+ if (nand->options & NAND_BUSWIDTH_16)
+ nand->read_buf = nand_read_buf16;
+ else
+ nand->read_buf = nand_read_buf;
+ nand->dev_ready = omap_spl_dev_ready;
+#endif
return 0;
}
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 819b197..34b4322 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -28,6 +28,7 @@ LIB := $(obj)libnet.o
COBJS-$(CONFIG_DRIVER_3C589) += 3c589.o
COBJS-$(CONFIG_PPC4xx_EMAC) += 4xx_enet.o
COBJS-$(CONFIG_ALTERA_TSE) += altera_tse.o
+COBJS-$(CONFIG_ARMADA100_FEC) += armada100_fec.o
COBJS-$(CONFIG_DRIVER_AT91EMAC) += at91_emac.o
COBJS-$(CONFIG_DRIVER_AX88180) += ax88180.o
COBJS-$(CONFIG_BCM570x) += bcm570x.o
diff --git a/drivers/net/armada100_fec.c b/drivers/net/armada100_fec.c
new file mode 100644
index 0000000..fbf9763
--- /dev/null
+++ b/drivers/net/armada100_fec.c
@@ -0,0 +1,736 @@
+/*
+ * (C) Copyright 2011
+ * eInfochips Ltd. <www.einfochips.com>
+ * Written-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
+ *
+ * (C) Copyright 2010
+ * Marvell Semiconductor <www.marvell.com>
+ * Contributor: Mahavir Jain <mjain@marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <common.h>
+#include <net.h>
+#include <malloc.h>
+#include <miiphy.h>
+#include <netdev.h>
+#include <asm/types.h>
+#include <asm/byteorder.h>
+#include <linux/err.h>
+#include <linux/mii.h>
+#include <asm/io.h>
+#include <asm/arch/armada100.h>
+#include "armada100_fec.h"
+
+#define PHY_ADR_REQ 0xFF /* Magic number to read/write PHY address */
+
+#ifdef DEBUG
+static int eth_dump_regs(struct eth_device *dev)
+{
+ struct armdfec_device *darmdfec = to_darmdfec(dev);
+ struct armdfec_reg *regs = darmdfec->regs;
+ unsigned int i = 0;
+
+ printf("\noffset: phy_adr, value: 0x%x\n", readl(&regs->phyadr));
+ printf("offset: smi, value: 0x%x\n", readl(&regs->smi));
+ for (i = 0x400; i <= 0x4e4; i += 4)
+ printf("offset: 0x%x, value: 0x%x\n",
+ i, readl(ARMD1_FEC_BASE + i));
+ return 0;
+}
+#endif
+
+static int armdfec_phy_timeout(u32 *reg, u32 flag, int cond)
+{
+ u32 timeout = PHY_WAIT_ITERATIONS;
+ u32 reg_val;
+
+ while (--timeout) {
+ reg_val = readl(reg);
+ if (cond && (reg_val & flag))
+ break;
+ else if (!cond && !(reg_val & flag))
+ break;
+ udelay(PHY_WAIT_MICRO_SECONDS);
+ }
+ return !timeout;
+}
+
+static int smi_reg_read(const char *devname, u8 phy_addr, u8 phy_reg,
+ u16 *value)
+{
+ struct eth_device *dev = eth_get_dev_by_name(devname);
+ struct armdfec_device *darmdfec = to_darmdfec(dev);
+ struct armdfec_reg *regs = darmdfec->regs;
+ u32 val;
+
+ if (phy_addr == PHY_ADR_REQ && phy_reg == PHY_ADR_REQ) {
+ val = readl(&regs->phyadr);
+ *value = val & 0x1f;
+ return 0;
+ }
+
+ /* check parameters */
+ if (phy_addr > PHY_MASK) {
+ printf("ARMD100 FEC: (%s) Invalid phy address: 0x%X\n",
+ __func__, phy_addr);
+ return -EINVAL;
+ }
+ if (phy_reg > PHY_MASK) {
+ printf("ARMD100 FEC: (%s) Invalid register offset: 0x%X\n",
+ __func__, phy_reg);
+ return -EINVAL;
+ }
+
+ /* wait for the SMI register to become available */
+ if (armdfec_phy_timeout(&regs->smi, SMI_BUSY, FALSE)) {
+ printf("ARMD100 FEC: (%s) PHY busy timeout\n", __func__);
+ return -1;
+ }
+
+ writel((phy_addr << 16) | (phy_reg << 21) | SMI_OP_R, &regs->smi);
+
+ /* now wait for the data to be valid */
+ if (armdfec_phy_timeout(&regs->smi, SMI_R_VALID, TRUE)) {
+ val = readl(&regs->smi);
+ printf("ARMD100 FEC: (%s) PHY Read timeout, val=0x%x\n",
+ __func__, val);
+ return -1;
+ }
+ val = readl(&regs->smi);
+ *value = val & 0xffff;
+
+ return 0;
+}
+
+static int smi_reg_write(const char *devname,
+ u8 phy_addr, u8 phy_reg, u16 value)
+{
+ struct eth_device *dev = eth_get_dev_by_name(devname);
+ struct armdfec_device *darmdfec = to_darmdfec(dev);
+ struct armdfec_reg *regs = darmdfec->regs;
+
+ if (phy_addr == PHY_ADR_REQ && phy_reg == PHY_ADR_REQ) {
+ clrsetbits_le32(&regs->phyadr, 0x1f, value & 0x1f);
+ return 0;
+ }
+
+ /* check parameters */
+ if (phy_addr > PHY_MASK) {
+ printf("ARMD100 FEC: (%s) Invalid phy address\n", __func__);
+ return -EINVAL;
+ }
+ if (phy_reg > PHY_MASK) {
+ printf("ARMD100 FEC: (%s) Invalid register offset\n", __func__);
+ return -EINVAL;
+ }
+
+ /* wait for the SMI register to become available */
+ if (armdfec_phy_timeout(&regs->smi, SMI_BUSY, FALSE)) {
+ printf("ARMD100 FEC: (%s) PHY busy timeout\n", __func__);
+ return -1;
+ }
+
+ writel((phy_addr << 16) | (phy_reg << 21) | SMI_OP_W | (value & 0xffff),
+ &regs->smi);
+ return 0;
+}
+
+/*
+ * Abort any transmit and receive operations and put DMA
+ * in idle state. AT and AR bits are cleared upon entering
+ * in IDLE state. So poll those bits to verify operation.
+ */
+static void abortdma(struct eth_device *dev)
+{
+ struct armdfec_device *darmdfec = to_darmdfec(dev);
+ struct armdfec_reg *regs = darmdfec->regs;
+ int delay;
+ int maxretries = 40;
+ u32 tmp;
+
+ while (--maxretries) {
+ writel(SDMA_CMD_AR | SDMA_CMD_AT, &regs->sdma_cmd);
+ udelay(100);
+
+ delay = 10;
+ while (--delay) {
+ tmp = readl(&regs->sdma_cmd);
+ if (!(tmp & (SDMA_CMD_AR | SDMA_CMD_AT)))
+ break;
+ udelay(10);
+ }
+ if (delay)
+ break;
+ }
+
+ if (!maxretries)
+ printf("ARMD100 FEC: (%s) DMA Stuck\n", __func__);
+}
+
+static inline u32 nibble_swapping_32_bit(u32 x)
+{
+ return ((x & 0xf0f0f0f0) >> 4) | ((x & 0x0f0f0f0f) << 4);
+}
+
+static inline u32 nibble_swapping_16_bit(u32 x)
+{
+ return ((x & 0x0000f0f0) >> 4) | ((x & 0x00000f0f) << 4);
+}
+
+static inline u32 flip_4_bits(u32 x)
+{
+ return ((x & 0x01) << 3) | ((x & 0x002) << 1)
+ | ((x & 0x04) >> 1) | ((x & 0x008) >> 3);
+}
+
+/*
+ * This function will calculate the hash function of the address.
+ * depends on the hash mode and hash size.
+ * Inputs
+ * mach - the 2 most significant bytes of the MAC address.
+ * macl - the 4 least significant bytes of the MAC address.
+ * Outputs
+ * return the calculated entry.
+ */
+static u32 hash_function(u32 mach, u32 macl)
+{
+ u32 hashresult;
+ u32 addrh;
+ u32 addrl;
+ u32 addr0;
+ u32 addr1;
+ u32 addr2;
+ u32 addr3;
+ u32 addrhswapped;
+ u32 addrlswapped;
+
+ addrh = nibble_swapping_16_bit(mach);
+ addrl = nibble_swapping_32_bit(macl);
+
+ addrhswapped = flip_4_bits(addrh & 0xf)
+ + ((flip_4_bits((addrh >> 4) & 0xf)) << 4)
+ + ((flip_4_bits((addrh >> 8) & 0xf)) << 8)
+ + ((flip_4_bits((addrh >> 12) & 0xf)) << 12);
+
+ addrlswapped = flip_4_bits(addrl & 0xf)
+ + ((flip_4_bits((addrl >> 4) & 0xf)) << 4)
+ + ((flip_4_bits((addrl >> 8) & 0xf)) << 8)
+ + ((flip_4_bits((addrl >> 12) & 0xf)) << 12)
+ + ((flip_4_bits((addrl >> 16) & 0xf)) << 16)
+ + ((flip_4_bits((addrl >> 20) & 0xf)) << 20)
+ + ((flip_4_bits((addrl >> 24) & 0xf)) << 24)
+ + ((flip_4_bits((addrl >> 28) & 0xf)) << 28);
+
+ addrh = addrhswapped;
+ addrl = addrlswapped;
+
+ addr0 = (addrl >> 2) & 0x03f;
+ addr1 = (addrl & 0x003) | (((addrl >> 8) & 0x7f) << 2);
+ addr2 = (addrl >> 15) & 0x1ff;
+ addr3 = ((addrl >> 24) & 0x0ff) | ((addrh & 1) << 8);
+
+ hashresult = (addr0 << 9) | (addr1 ^ addr2 ^ addr3);
+ hashresult = hashresult & 0x07ff;
+ return hashresult;
+}
+
+/*
+ * This function will add an entry to the address table.
+ * depends on the hash mode and hash size that was initialized.
+ * Inputs
+ * mach - the 2 most significant bytes of the MAC address.
+ * macl - the 4 least significant bytes of the MAC address.
+ * skip - if 1, skip this address.
+ * rd - the RD field in the address table.
+ * Outputs
+ * address table entry is added.
+ * 0 if success.
+ * -ENOSPC if table full
+ */
+static int add_del_hash_entry(struct armdfec_device *darmdfec, u32 mach,
+ u32 macl, u32 rd, u32 skip, int del)
+{
+ struct addr_table_entry_t *entry, *start;
+ u32 newhi;
+ u32 newlo;
+ u32 i;
+
+ newlo = (((mach >> 4) & 0xf) << 15)
+ | (((mach >> 0) & 0xf) << 11)
+ | (((mach >> 12) & 0xf) << 7)
+ | (((mach >> 8) & 0xf) << 3)
+ | (((macl >> 20) & 0x1) << 31)
+ | (((macl >> 16) & 0xf) << 27)
+ | (((macl >> 28) & 0xf) << 23)
+ | (((macl >> 24) & 0xf) << 19)
+ | (skip << HTESKIP) | (rd << HTERDBIT)
+ | HTEVALID;
+
+ newhi = (((macl >> 4) & 0xf) << 15)
+ | (((macl >> 0) & 0xf) << 11)
+ | (((macl >> 12) & 0xf) << 7)
+ | (((macl >> 8) & 0xf) << 3)
+ | (((macl >> 21) & 0x7) << 0);
+
+ /*
+ * Pick the appropriate table, start scanning for free/reusable
+ * entries at the index obtained by hashing the specified MAC address
+ */
+ start = (struct addr_table_entry_t *)(darmdfec->htpr);
+ entry = start + hash_function(mach, macl);
+ for (i = 0; i < HOP_NUMBER; i++) {
+ if (!(entry->lo & HTEVALID)) {
+ break;
+ } else {
+ /* if same address put in same position */
+ if (((entry->lo & 0xfffffff8) == (newlo & 0xfffffff8))
+ && (entry->hi == newhi))
+ break;
+ }
+ if (entry == start + 0x7ff)
+ entry = start;
+ else
+ entry++;
+ }
+
+ if (((entry->lo & 0xfffffff8) != (newlo & 0xfffffff8)) &&
+ (entry->hi != newhi) && del)
+ return 0;
+
+ if (i == HOP_NUMBER) {
+ if (!del) {
+ printf("ARMD100 FEC: (%s) table section is full\n",
+ __func__);
+ return -ENOSPC;
+ } else {
+ return 0;
+ }
+ }
+
+ /*
+ * Update the selected entry
+ */
+ if (del) {
+ entry->hi = 0;
+ entry->lo = 0;
+ } else {
+ entry->hi = newhi;
+ entry->lo = newlo;
+ }
+
+ return 0;
+}
+
+/*
+ * Create an addressTable entry from MAC address info
+ * found in the specifed net_device struct
+ *
+ * Input : pointer to ethernet interface network device structure
+ * Output : N/A
+ */
+static void update_hash_table_mac_address(struct armdfec_device *darmdfec,
+ u8 *oaddr, u8 *addr)
+{
+ u32 mach;
+ u32 macl;
+
+ /* Delete old entry */
+ if (oaddr) {
+ mach = (oaddr[0] << 8) | oaddr[1];
+ macl = (oaddr[2] << 24) | (oaddr[3] << 16) |
+ (oaddr[4] << 8) | oaddr[5];
+ add_del_hash_entry(darmdfec, mach, macl, 1, 0, HASH_DELETE);
+ }
+
+ /* Add new entry */
+ mach = (addr[0] << 8) | addr[1];
+ macl = (addr[2] << 24) | (addr[3] << 16) | (addr[4] << 8) | addr[5];
+ add_del_hash_entry(darmdfec, mach, macl, 1, 0, HASH_ADD);
+}
+
+/* Address Table Initialization */
+static void init_hashtable(struct eth_device *dev)
+{
+ struct armdfec_device *darmdfec = to_darmdfec(dev);
+ struct armdfec_reg *regs = darmdfec->regs;
+ memset(darmdfec->htpr, 0, HASH_ADDR_TABLE_SIZE);
+ writel((u32)darmdfec->htpr, &regs->htpr);
+}
+
+/*
+ * This detects PHY chip from address 0-31 by reading PHY status
+ * registers. PHY chip can be connected at any of this address.
+ */
+static int ethernet_phy_detect(struct eth_device *dev)
+{
+ u32 val;
+ u16 tmp, mii_status;
+ u8 addr;
+
+ for (addr = 0; addr < 32; addr++) {
+ if (miiphy_read(dev->name, addr, MII_BMSR, &mii_status) != 0)
+ /* try next phy */
+ continue;
+
+ /* invalid MII status. More validation required here... */
+ if (mii_status == 0 || mii_status == 0xffff)
+ /* try next phy */
+ continue;
+
+ if (miiphy_read(dev->name, addr, MII_PHYSID1, &tmp) != 0)
+ /* try next phy */
+ continue;
+
+ val = tmp << 16;
+ if (miiphy_read(dev->name, addr, MII_PHYSID2, &tmp) != 0)
+ /* try next phy */
+ continue;
+
+ val |= tmp;
+
+ if ((val & 0xfffffff0) != 0)
+ return addr;
+ }
+ return -1;
+}
+
+static void armdfec_init_rx_desc_ring(struct armdfec_device *darmdfec)
+{
+ struct rx_desc *p_rx_desc;
+ int i;
+
+ /* initialize the Rx descriptors ring */
+ p_rx_desc = darmdfec->p_rxdesc;
+ for (i = 0; i < RINGSZ; i++) {
+ p_rx_desc->cmd_sts = BUF_OWNED_BY_DMA | RX_EN_INT;
+ p_rx_desc->buf_size = PKTSIZE_ALIGN;
+ p_rx_desc->byte_cnt = 0;
+ p_rx_desc->buf_ptr = darmdfec->p_rxbuf + i * PKTSIZE_ALIGN;
+ if (i == (RINGSZ - 1)) {
+ p_rx_desc->nxtdesc_p = darmdfec->p_rxdesc;
+ } else {
+ p_rx_desc->nxtdesc_p = (struct rx_desc *)
+ ((u32)p_rx_desc + ARMDFEC_RXQ_DESC_ALIGNED_SIZE);
+ p_rx_desc = p_rx_desc->nxtdesc_p;
+ }
+ }
+ darmdfec->p_rxdesc_curr = darmdfec->p_rxdesc;
+}
+
+static int armdfec_init(struct eth_device *dev, bd_t *bd)
+{
+ struct armdfec_device *darmdfec = to_darmdfec(dev);
+ struct armdfec_reg *regs = darmdfec->regs;
+ int phy_adr;
+
+ armdfec_init_rx_desc_ring(darmdfec);
+
+ /* Disable interrupts */
+ writel(0, &regs->im);
+ writel(0, &regs->ic);
+ /* Write to ICR to clear interrupts. */
+ writel(0, &regs->iwc);
+
+ /*
+ * Abort any transmit and receive operations and put DMA
+ * in idle state.
+ */
+ abortdma(dev);
+
+ /* Initialize address hash table */
+ init_hashtable(dev);
+
+ /* SDMA configuration */
+ writel(SDCR_BSZ8 | /* Burst size = 32 bytes */
+ SDCR_RIFB | /* Rx interrupt on frame */
+ SDCR_BLMT | /* Little endian transmit */
+ SDCR_BLMR | /* Little endian receive */
+ SDCR_RC_MAX_RETRANS, /* Max retransmit count */
+ &regs->sdma_conf);
+ /* Port Configuration */
+ writel(PCR_HS, &regs->pconf); /* Hash size is 1/2kb */
+
+ /* Set extended port configuration */
+ writel(PCXR_2BSM | /* Two byte suffix aligns IP hdr */
+ PCXR_DSCP_EN | /* Enable DSCP in IP */
+ PCXR_MFL_1536 | /* Set MTU = 1536 */
+ PCXR_FLP | /* do not force link pass */
+ PCXR_TX_HIGH_PRI, /* Transmit - high priority queue */
+ &regs->pconf_ext);
+
+ update_hash_table_mac_address(darmdfec, NULL, dev->enetaddr);
+
+ /* Update TX and RX queue descriptor register */
+ writel((u32)darmdfec->p_txdesc, &regs->txcdp[TXQ]);
+ writel((u32)darmdfec->p_rxdesc, &regs->rxfdp[RXQ]);
+ writel((u32)darmdfec->p_rxdesc_curr, &regs->rxcdp[RXQ]);
+
+ /* Enable Interrupts */
+ writel(ALL_INTS, &regs->im);
+
+ /* Enable Ethernet Port */
+ setbits_le32(&regs->pconf, PCR_EN);
+
+ /* Enable RX DMA engine */
+ setbits_le32(&regs->sdma_cmd, SDMA_CMD_ERD);
+
+#ifdef DEBUG
+ eth_dump_regs(dev);
+#endif
+
+#if (defined(CONFIG_MII) || defined(CONFIG_CMD_MII))
+
+#if defined(CONFIG_PHY_BASE_ADR)
+ miiphy_write(dev->name, PHY_ADR_REQ, PHY_ADR_REQ, CONFIG_PHY_BASE_ADR);
+#else
+ /* Search phy address from range 0-31 */
+ phy_adr = ethernet_phy_detect(dev);
+ if (phy_adr < 0) {
+ printf("ARMD100 FEC: PHY not detected at address range 0-31\n");
+ return -1;
+ } else {
+ debug("ARMD100 FEC: PHY detected at addr %d\n", phy_adr);
+ miiphy_write(dev->name, PHY_ADR_REQ, PHY_ADR_REQ, phy_adr);
+ }
+#endif
+
+#if defined(CONFIG_SYS_FAULT_ECHO_LINK_DOWN)
+ /* Wait up to 5s for the link status */
+ for (i = 0; i < 5; i++) {
+ u16 phy_adr;
+
+ miiphy_read(dev->name, 0xFF, 0xFF, &phy_adr);
+ /* Return if we get link up */
+ if (miiphy_link(dev->name, phy_adr))
+ return 0;
+ udelay(1000000);
+ }
+
+ printf("ARMD100 FEC: No link on %s\n", dev->name);
+ return -1;
+#endif
+#endif
+ return 0;
+}
+
+static void armdfec_halt(struct eth_device *dev)
+{
+ struct armdfec_device *darmdfec = to_darmdfec(dev);
+ struct armdfec_reg *regs = darmdfec->regs;
+
+ /* Stop RX DMA */
+ clrbits_le32(&regs->sdma_cmd, SDMA_CMD_ERD);
+
+ /*
+ * Abort any transmit and receive operations and put DMA
+ * in idle state.
+ */
+ abortdma(dev);
+
+ /* Disable interrupts */
+ writel(0, &regs->im);
+ writel(0, &regs->ic);
+ writel(0, &regs->iwc);
+
+ /* Disable Port */
+ clrbits_le32(&regs->pconf, PCR_EN);
+}
+
+static int armdfec_send(struct eth_device *dev, volatile void *dataptr,
+ int datasize)
+{
+ struct armdfec_device *darmdfec = to_darmdfec(dev);
+ struct armdfec_reg *regs = darmdfec->regs;
+ struct tx_desc *p_txdesc = darmdfec->p_txdesc;
+ void *p = (void *)dataptr;
+ int retry = PHY_WAIT_ITERATIONS * PHY_WAIT_MICRO_SECONDS;
+ u32 cmd_sts;
+
+ /* Copy buffer if it's misaligned */
+ if ((u32)dataptr & 0x07) {
+ if (datasize > PKTSIZE_ALIGN) {
+ printf("ARMD100 FEC: Non-aligned data too large (%d)\n",
+ datasize);
+ return -1;
+ }
+ memcpy(darmdfec->p_aligned_txbuf, p, datasize);
+ p = darmdfec->p_aligned_txbuf;
+ }
+
+ p_txdesc->cmd_sts = TX_ZERO_PADDING | TX_GEN_CRC;
+ p_txdesc->cmd_sts |= TX_FIRST_DESC | TX_LAST_DESC;
+ p_txdesc->cmd_sts |= BUF_OWNED_BY_DMA;
+ p_txdesc->cmd_sts |= TX_EN_INT;
+ p_txdesc->buf_ptr = p;
+ p_txdesc->byte_cnt = datasize;
+
+ /* Apply send command using high priority TX queue */
+ writel((u32)p_txdesc, &regs->txcdp[TXQ]);
+ writel(SDMA_CMD_TXDL | SDMA_CMD_TXDH | SDMA_CMD_ERD, &regs->sdma_cmd);
+
+ /*
+ * wait for packet xmit completion
+ */
+ cmd_sts = readl(&p_txdesc->cmd_sts);
+ while (cmd_sts & BUF_OWNED_BY_DMA) {
+ /* return fail if error is detected */
+ if ((cmd_sts & (TX_ERROR | TX_LAST_DESC)) ==
+ (TX_ERROR | TX_LAST_DESC)) {
+ printf("ARMD100 FEC: (%s) in xmit packet\n", __func__);
+ return -1;
+ }
+ cmd_sts = readl(&p_txdesc->cmd_sts);
+ if (!(retry--)) {
+ printf("ARMD100 FEC: (%s) xmit packet timeout!\n",
+ __func__);
+ return -1;
+ }
+ }
+
+ return 0;
+}
+
+static int armdfec_recv(struct eth_device *dev)
+{
+ struct armdfec_device *darmdfec = to_darmdfec(dev);
+ struct rx_desc *p_rxdesc_curr = darmdfec->p_rxdesc_curr;
+ u32 cmd_sts;
+ u32 timeout = 0;
+
+ /* wait untill rx packet available or timeout */
+ do {
+ if (timeout < PHY_WAIT_ITERATIONS * PHY_WAIT_MICRO_SECONDS) {
+ timeout++;
+ } else {
+ debug("ARMD100 FEC: %s time out...\n", __func__);
+ return -1;
+ }
+ } while (readl(&p_rxdesc_curr->cmd_sts) & BUF_OWNED_BY_DMA);
+
+ if (p_rxdesc_curr->byte_cnt != 0) {
+ debug("ARMD100 FEC: %s: Received %d byte Packet @ 0x%x"
+ "(cmd_sts= %08x)\n", __func__,
+ (u32)p_rxdesc_curr->byte_cnt,
+ (u32)p_rxdesc_curr->buf_ptr,
+ (u32)p_rxdesc_curr->cmd_sts);
+ }
+
+ /*
+ * In case received a packet without first/last bits on
+ * OR the error summary bit is on,
+ * the packets needs to be dropeed.
+ */
+ cmd_sts = readl(&p_rxdesc_curr->cmd_sts);
+
+ if ((cmd_sts & (RX_FIRST_DESC | RX_LAST_DESC)) !=
+ (RX_FIRST_DESC | RX_LAST_DESC)) {
+ printf("ARMD100 FEC: (%s) Dropping packet spread on"
+ " multiple descriptors\n", __func__);
+ } else if (cmd_sts & RX_ERROR) {
+ printf("ARMD100 FEC: (%s) Dropping packet with errors\n",
+ __func__);
+ } else {
+ /* !!! call higher layer processing */
+ debug("ARMD100 FEC: (%s) Sending Received packet to"
+ " upper layer (NetReceive)\n", __func__);
+
+ /*
+ * let the upper layer handle the packet, subtract offset
+ * as two dummy bytes are added in received buffer see
+ * PORT_CONFIG_EXT register bit TWO_Byte_Stuff_Mode bit.
+ */
+ NetReceive((p_rxdesc_curr->buf_ptr + RX_BUF_OFFSET),
+ (int)(p_rxdesc_curr->byte_cnt - RX_BUF_OFFSET));
+ }
+ /*
+ * free these descriptors and point next in the ring
+ */
+ p_rxdesc_curr->cmd_sts = BUF_OWNED_BY_DMA | RX_EN_INT;
+ p_rxdesc_curr->buf_size = PKTSIZE_ALIGN;
+ p_rxdesc_curr->byte_cnt = 0;
+
+ writel((u32)p_rxdesc_curr->nxtdesc_p, (u32)&darmdfec->p_rxdesc_curr);
+
+ return 0;
+}
+
+int armada100_fec_register(unsigned long base_addr)
+{
+ struct armdfec_device *darmdfec;
+ struct eth_device *dev;
+
+ darmdfec = malloc(sizeof(struct armdfec_device));
+ if (!darmdfec)
+ goto error;
+
+ memset(darmdfec, 0, sizeof(struct armdfec_device));
+
+ darmdfec->htpr = memalign(8, HASH_ADDR_TABLE_SIZE);
+ if (!darmdfec->htpr)
+ goto error1;
+
+ darmdfec->p_rxdesc = memalign(PKTALIGN,
+ ARMDFEC_RXQ_DESC_ALIGNED_SIZE * RINGSZ + 1);
+
+ if (!darmdfec->p_rxdesc)
+ goto error1;
+
+ darmdfec->p_rxbuf = memalign(PKTALIGN, RINGSZ * PKTSIZE_ALIGN + 1);
+ if (!darmdfec->p_rxbuf)
+ goto error1;
+
+ darmdfec->p_aligned_txbuf = memalign(8, PKTSIZE_ALIGN);
+ if (!darmdfec->p_aligned_txbuf)
+ goto error1;
+
+ darmdfec->p_txdesc = memalign(PKTALIGN, sizeof(struct tx_desc) + 1);
+ if (!darmdfec->p_txdesc)
+ goto error1;
+
+ dev = &darmdfec->dev;
+ /* Assign ARMADA100 Fast Ethernet Controller Base Address */
+ darmdfec->regs = (void *)base_addr;
+
+ /* must be less than NAMESIZE (16) */
+ strcpy(dev->name, "armd-fec0");
+
+ dev->init = armdfec_init;
+ dev->halt = armdfec_halt;
+ dev->send = armdfec_send;
+ dev->recv = armdfec_recv;
+
+ eth_register(dev);
+
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
+ miiphy_register(dev->name, smi_reg_read, smi_reg_write);
+#endif
+ return 0;
+
+error1:
+ free(darmdfec->p_aligned_txbuf);
+ free(darmdfec->p_rxbuf);
+ free(darmdfec->p_rxdesc);
+ free(darmdfec->htpr);
+error:
+ free(darmdfec);
+ printf("AMD100 FEC: (%s) Failed to allocate memory\n", __func__);
+ return -1;
+}
diff --git a/drivers/net/armada100_fec.h b/drivers/net/armada100_fec.h
new file mode 100644
index 0000000..e2df4fc
--- /dev/null
+++ b/drivers/net/armada100_fec.h
@@ -0,0 +1,232 @@
+/*
+ * (C) Copyright 2011
+ * eInfochips Ltd. <www.einfochips.com>
+ * Written-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
+ *
+ * (C) Copyright 2010
+ * Marvell Semiconductor <www.marvell.com>
+ * Contributor: Mahavir Jain <mjain@marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef __ARMADA100_FEC_H__
+#define __ARMADA100_FEC_H__
+
+#ifndef TRUE
+#define TRUE 1
+#endif
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+#define PORT_NUM 0x0
+
+/* RX & TX descriptor command */
+#define BUF_OWNED_BY_DMA (1<<31)
+
+/* RX descriptor status */
+#define RX_EN_INT (1<<23)
+#define RX_FIRST_DESC (1<<17)
+#define RX_LAST_DESC (1<<16)
+#define RX_ERROR (1<<15)
+
+/* TX descriptor command */
+#define TX_EN_INT (1<<23)
+#define TX_GEN_CRC (1<<22)
+#define TX_ZERO_PADDING (1<<18)
+#define TX_FIRST_DESC (1<<17)
+#define TX_LAST_DESC (1<<16)
+#define TX_ERROR (1<<15)
+
+/* smi register */
+#define SMI_BUSY (1<<28) /* 0 - Write, 1 - Read */
+#define SMI_R_VALID (1<<27) /* 0 - Write, 1 - Read */
+#define SMI_OP_W (0<<26) /* Write operation */
+#define SMI_OP_R (1<<26) /* Read operation */
+
+#define HASH_ADD 0
+#define HASH_DELETE 1
+#define HASH_ADDR_TABLE_SIZE 0x4000 /* 16K (1/2K address - PCR_HS == 1) */
+#define HOP_NUMBER 12
+
+#define PHY_WAIT_ITERATIONS 1000 /* 1000 iterations * 10uS = 10mS max */
+#define PHY_WAIT_MICRO_SECONDS 10
+
+#define ETH_HW_IP_ALIGN 2 /* hw aligns IP header */
+#define ETH_EXTRA_HEADER (6+6+2+4)
+ /* dest+src addr+protocol id+crc */
+#define MAX_PKT_SIZE 1536
+
+
+/* Bit definitions of the SDMA Config Reg */
+#define SDCR_BSZ_OFF 12
+#define SDCR_BSZ8 (3<<SDCR_BSZ_OFF)
+#define SDCR_BSZ4 (2<<SDCR_BSZ_OFF)
+#define SDCR_BSZ2 (1<<SDCR_BSZ_OFF)
+#define SDCR_BSZ1 (0<<SDCR_BSZ_OFF)
+#define SDCR_BLMR (1<<6)
+#define SDCR_BLMT (1<<7)
+#define SDCR_RIFB (1<<9)
+#define SDCR_RC_OFF 2
+#define SDCR_RC_MAX_RETRANS (0xf << SDCR_RC_OFF)
+
+/* SDMA_CMD */
+#define SDMA_CMD_AT (1<<31)
+#define SDMA_CMD_TXDL (1<<24)
+#define SDMA_CMD_TXDH (1<<23)
+#define SDMA_CMD_AR (1<<15)
+#define SDMA_CMD_ERD (1<<7)
+
+
+/* Bit definitions of the Port Config Reg */
+#define PCR_HS (1<<12)
+#define PCR_EN (1<<7)
+#define PCR_PM (1<<0)
+
+/* Bit definitions of the Port Config Extend Reg */
+#define PCXR_2BSM (1<<28)
+#define PCXR_DSCP_EN (1<<21)
+#define PCXR_MFL_1518 (0<<14)
+#define PCXR_MFL_1536 (1<<14)
+#define PCXR_MFL_2048 (2<<14)
+#define PCXR_MFL_64K (3<<14)
+#define PCXR_FLP (1<<11)
+#define PCXR_PRIO_TX_OFF 3
+#define PCXR_TX_HIGH_PRI (7<<PCXR_PRIO_TX_OFF)
+
+/*
+ * * Bit definitions of the Interrupt Cause Reg
+ * * and Interrupt MASK Reg is the same
+ * */
+#define ICR_RXBUF (1<<0)
+#define ICR_TXBUF_H (1<<2)
+#define ICR_TXBUF_L (1<<3)
+#define ICR_TXEND_H (1<<6)
+#define ICR_TXEND_L (1<<7)
+#define ICR_RXERR (1<<8)
+#define ICR_TXERR_H (1<<10)
+#define ICR_TXERR_L (1<<11)
+#define ICR_TX_UDR (1<<13)
+#define ICR_MII_CH (1<<28)
+
+#define ALL_INTS (ICR_TXBUF_H | ICR_TXBUF_L | ICR_TX_UDR |\
+ ICR_TXERR_H | ICR_TXERR_L |\
+ ICR_TXEND_H | ICR_TXEND_L |\
+ ICR_RXBUF | ICR_RXERR | ICR_MII_CH)
+
+#define PHY_MASK 0x0000001f
+
+#define to_darmdfec(_kd) container_of(_kd, struct armdfec_device, dev)
+/* Size of a Tx/Rx descriptor used in chain list data structure */
+#define ARMDFEC_RXQ_DESC_ALIGNED_SIZE \
+ (((sizeof(struct rx_desc) / PKTALIGN) + 1) * PKTALIGN)
+
+#define RX_BUF_OFFSET 0x2
+#define RXQ 0x0 /* RX Queue 0 */
+#define TXQ 0x1 /* TX Queue 1 */
+
+struct addr_table_entry_t {
+ u32 lo;
+ u32 hi;
+};
+
+/* Bit fields of a Hash Table Entry */
+enum hash_table_entry {
+ HTEVALID = 1,
+ HTESKIP = 2,
+ HTERD = 4,
+ HTERDBIT = 2
+};
+
+struct tx_desc {
+ u32 cmd_sts; /* Command/status field */
+ u16 reserved;
+ u16 byte_cnt; /* buffer byte count */
+ u8 *buf_ptr; /* pointer to buffer for this descriptor */
+ struct tx_desc *nextdesc_p; /* Pointer to next descriptor */
+};
+
+struct rx_desc {
+ u32 cmd_sts; /* Descriptor command status */
+ u16 byte_cnt; /* Descriptor buffer byte count */
+ u16 buf_size; /* Buffer size */
+ u8 *buf_ptr; /* Descriptor buffer pointer */
+ struct rx_desc *nxtdesc_p; /* Next descriptor pointer */
+};
+
+/*
+ * Armada100 Fast Ethernet controller Registers
+ * Refer Datasheet Appendix A.22
+ */
+struct armdfec_reg {
+ u32 phyadr; /* PHY Address */
+ u32 pad1[3];
+ u32 smi; /* SMI */
+ u32 pad2[0xFB];
+ u32 pconf; /* Port configuration */
+ u32 pad3;
+ u32 pconf_ext; /* Port configuration extend */
+ u32 pad4;
+ u32 pcmd; /* Port Command */
+ u32 pad5;
+ u32 pstatus; /* Port Status */
+ u32 pad6;
+ u32 spar; /* Serial Parameters */
+ u32 pad7;
+ u32 htpr; /* Hash table pointer */
+ u32 pad8;
+ u32 fcsal; /* Flow control source address low */
+ u32 pad9;
+ u32 fcsah; /* Flow control source address high */
+ u32 pad10;
+ u32 sdma_conf; /* SDMA configuration */
+ u32 pad11;
+ u32 sdma_cmd; /* SDMA command */
+ u32 pad12;
+ u32 ic; /* Interrupt cause */
+ u32 iwc; /* Interrupt write to clear */
+ u32 im; /* Interrupt mask */
+ u32 pad13;
+ u32 *eth_idscpp[4]; /* Eth0 IP Differentiated Services Code
+ Point to Priority 0 Low */
+ u32 eth_vlan_p; /* Eth0 VLAN Priority Tag to Priority */
+ u32 pad14[3];
+ struct rx_desc *rxfdp[4]; /* Ethernet First Rx Descriptor
+ Pointer */
+ u32 pad15[4];
+ struct rx_desc *rxcdp[4]; /* Ethernet Current Rx Descriptor
+ Pointer */
+ u32 pad16[0x0C];
+ struct tx_desc *txcdp[2]; /* Ethernet Current Tx Descriptor
+ Pointer */
+};
+
+struct armdfec_device {
+ struct eth_device dev;
+ struct armdfec_reg *regs;
+ struct tx_desc *p_txdesc;
+ struct rx_desc *p_rxdesc;
+ struct rx_desc *p_rxdesc_curr;
+ u8 *p_rxbuf;
+ u8 *p_aligned_txbuf;
+ u8 *htpr; /* hash pointer */
+};
+
+#endif /* __ARMADA100_FEC_H__ */
diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index c0b8929..a8905b8 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -680,6 +680,9 @@ int davinci_emac_initialize(void)
davinci_eth_mdio_enable();
+ /* let the EMAC detect the PHYs */
+ udelay(5000);
+
for (i = 0; i < 256; i++) {
if (readl(&adap_mdio->ALIVE))
break;
@@ -711,6 +714,13 @@ int davinci_emac_initialize(void)
phy_id |= tmp & 0x0000ffff;
switch (phy_id) {
+ case PHY_KSZ8873:
+ sprintf(phy.name, "KSZ8873 @ 0x%02x", active_phy_addr);
+ phy.init = ksz8873_init_phy;
+ phy.is_phy_connected = ksz8873_is_phy_connected;
+ phy.get_link_speed = ksz8873_get_link_speed;
+ phy.auto_negotiate = ksz8873_auto_negotiate;
+ break;
case PHY_LXT972:
sprintf(phy.name, "LXT972 @ 0x%02x", active_phy_addr);
phy.init = lxt972_init_phy;
@@ -740,7 +750,7 @@ int davinci_emac_initialize(void)
phy.auto_negotiate = gen_auto_negotiate;
}
- printf("Ethernet PHY: %s\n", phy.name);
+ debug("Ethernet PHY: %s\n", phy.name);
miiphy_register(phy.name, davinci_mii_phy_read, davinci_mii_phy_write);
return(1);
diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
index ab90afa..cfe2176 100644
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@@ -38,6 +38,10 @@ DECLARE_GLOBAL_DATA_PTR;
#error "CONFIG_MII has to be defined!"
#endif
+#ifndef CONFIG_FEC_XCV_TYPE
+#define CONFIG_FEC_XCV_TYPE MII100
+#endif
+
#undef DEBUG
struct nbuf {
@@ -47,18 +51,6 @@ struct nbuf {
uint8_t head[16]; /**< MAC header(6 + 6 + 2) + 2(aligned) */
};
-struct fec_priv gfec = {
- .eth = (struct ethernet_regs *)IMX_FEC_BASE,
- .xcv_type = MII100,
- .rbd_base = NULL,
- .rbd_index = 0,
- .tbd_base = NULL,
- .tbd_index = 0,
- .bd = NULL,
- .rdb_ptr = NULL,
- .base_ptr = NULL,
-};
-
/*
* MII-interface related functions
*/
@@ -67,6 +59,7 @@ static int fec_miiphy_read(const char *dev, uint8_t phyAddr, uint8_t regAddr,
{
struct eth_device *edev = eth_get_dev_by_name(dev);
struct fec_priv *fec = (struct fec_priv *)edev->priv;
+ struct ethernet_regs *eth = fec->eth;
uint32_t reg; /* convenient holder for the PHY register */
uint32_t phy; /* convenient holder for the PHY */
@@ -76,18 +69,18 @@ static int fec_miiphy_read(const char *dev, uint8_t phyAddr, uint8_t regAddr,
* reading from any PHY's register is done by properly
* programming the FEC's MII data register.
*/
- writel(FEC_IEVENT_MII, &fec->eth->ievent);
+ writel(FEC_IEVENT_MII, &eth->ievent);
reg = regAddr << FEC_MII_DATA_RA_SHIFT;
phy = phyAddr << FEC_MII_DATA_PA_SHIFT;
writel(FEC_MII_DATA_ST | FEC_MII_DATA_OP_RD | FEC_MII_DATA_TA |
- phy | reg, &fec->eth->mii_data);
+ phy | reg, &eth->mii_data);
/*
* wait for the related interrupt
*/
start = get_timer(0);
- while (!(readl(&fec->eth->ievent) & FEC_IEVENT_MII)) {
+ while (!(readl(&eth->ievent) & FEC_IEVENT_MII)) {
if (get_timer(start) > (CONFIG_SYS_HZ / 1000)) {
printf("Read MDIO failed...\n");
return -1;
@@ -97,12 +90,12 @@ static int fec_miiphy_read(const char *dev, uint8_t phyAddr, uint8_t regAddr,
/*
* clear mii interrupt bit
*/
- writel(FEC_IEVENT_MII, &fec->eth->ievent);
+ writel(FEC_IEVENT_MII, &eth->ievent);
/*
* it's now safe to read the PHY's register
*/
- *retVal = readl(&fec->eth->mii_data);
+ *retVal = readl(&eth->mii_data);
debug("fec_miiphy_read: phy: %02x reg:%02x val:%#x\n", phyAddr,
regAddr, *retVal);
return 0;
@@ -117,13 +110,14 @@ static void fec_mii_setspeed(struct fec_priv *fec)
writel((((imx_get_fecclk() / 1000000) + 2) / 5) << 1,
&fec->eth->mii_speed);
debug("fec_init: mii_speed %#lx\n",
- fec->eth->mii_speed);
+ readl(&fec->eth->mii_speed));
}
static int fec_miiphy_write(const char *dev, uint8_t phyAddr, uint8_t regAddr,
uint16_t data)
{
struct eth_device *edev = eth_get_dev_by_name(dev);
struct fec_priv *fec = (struct fec_priv *)edev->priv;
+ struct ethernet_regs *eth = fec->eth;
uint32_t reg; /* convenient holder for the PHY register */
uint32_t phy; /* convenient holder for the PHY */
@@ -133,13 +127,13 @@ static int fec_miiphy_write(const char *dev, uint8_t phyAddr, uint8_t regAddr,
phy = phyAddr << FEC_MII_DATA_PA_SHIFT;
writel(FEC_MII_DATA_ST | FEC_MII_DATA_OP_WR |
- FEC_MII_DATA_TA | phy | reg | data, &fec->eth->mii_data);
+ FEC_MII_DATA_TA | phy | reg | data, &eth->mii_data);
/*
* wait for the MII interrupt
*/
start = get_timer(0);
- while (!(readl(&fec->eth->ievent) & FEC_IEVENT_MII)) {
+ while (!(readl(&eth->ievent) & FEC_IEVENT_MII)) {
if (get_timer(start) > (CONFIG_SYS_HZ / 1000)) {
printf("Write MDIO failed...\n");
return -1;
@@ -149,7 +143,7 @@ static int fec_miiphy_write(const char *dev, uint8_t phyAddr, uint8_t regAddr,
/*
* clear MII interrupt bit
*/
- writel(FEC_IEVENT_MII, &fec->eth->ievent);
+ writel(FEC_IEVENT_MII, &eth->ievent);
debug("fec_miiphy_write: phy: %02x reg:%02x val:%#x\n", phyAddr,
regAddr, data);
@@ -158,33 +152,40 @@ static int fec_miiphy_write(const char *dev, uint8_t phyAddr, uint8_t regAddr,
static int miiphy_restart_aneg(struct eth_device *dev)
{
+ struct fec_priv *fec = (struct fec_priv *)dev->priv;
+ int ret = 0;
+
/*
* Wake up from sleep if necessary
* Reset PHY, then delay 300ns
*/
#ifdef CONFIG_MX27
- miiphy_write(dev->name, CONFIG_FEC_MXC_PHYADDR, MII_DCOUNTER, 0x00FF);
+ miiphy_write(dev->name, fec->phy_id, MII_DCOUNTER, 0x00FF);
#endif
- miiphy_write(dev->name, CONFIG_FEC_MXC_PHYADDR, MII_BMCR,
+ miiphy_write(dev->name, fec->phy_id, MII_BMCR,
BMCR_RESET);
udelay(1000);
/*
* Set the auto-negotiation advertisement register bits
*/
- miiphy_write(dev->name, CONFIG_FEC_MXC_PHYADDR, MII_ADVERTISE,
+ miiphy_write(dev->name, fec->phy_id, MII_ADVERTISE,
LPA_100FULL | LPA_100HALF | LPA_10FULL |
LPA_10HALF | PHY_ANLPAR_PSB_802_3);
- miiphy_write(dev->name, CONFIG_FEC_MXC_PHYADDR, MII_BMCR,
+ miiphy_write(dev->name, fec->phy_id, MII_BMCR,
BMCR_ANENABLE | BMCR_ANRESTART);
- return 0;
+ if (fec->mii_postcall)
+ ret = fec->mii_postcall(fec->phy_id);
+
+ return ret;
}
static int miiphy_wait_aneg(struct eth_device *dev)
{
uint32_t start;
uint16_t status;
+ struct fec_priv *fec = (struct fec_priv *)dev->priv;
/*
* Wait for AN completion
@@ -196,7 +197,7 @@ static int miiphy_wait_aneg(struct eth_device *dev)
return -1;
}
- if (miiphy_read(dev->name, CONFIG_FEC_MXC_PHYADDR,
+ if (miiphy_read(dev->name, fec->phy_id,
MII_BMSR, &status)) {
printf("%s: Autonegotiation failed. status: 0x%04x\n",
dev->name, status);
@@ -384,8 +385,8 @@ static int fec_open(struct eth_device *edev)
#endif
miiphy_wait_aneg(edev);
- miiphy_speed(edev->name, CONFIG_FEC_MXC_PHYADDR);
- miiphy_duplex(edev->name, CONFIG_FEC_MXC_PHYADDR);
+ miiphy_speed(edev->name, fec->phy_id);
+ miiphy_duplex(edev->name, fec->phy_id);
/*
* Enable SmartDMA receive task
@@ -400,6 +401,9 @@ static int fec_init(struct eth_device *dev, bd_t* bd)
{
uint32_t base;
struct fec_priv *fec = (struct fec_priv *)dev->priv;
+ uint32_t mib_ptr = (uint32_t)&fec->eth->rmon_t_drop;
+ uint32_t rcntrl;
+ int i;
/* Initialize MAC address */
fec_set_hwaddr(dev);
@@ -442,19 +446,21 @@ static int fec_init(struct eth_device *dev, bd_t* bd)
/*
* Set FEC-Lite receive control register(R_CNTRL):
*/
- if (fec->xcv_type == SEVENWIRE) {
- /*
- * Frame length=1518; 7-wire mode
- */
- writel(0x05ee0020, &fec->eth->r_cntrl); /* FIXME 0x05ee0000 */
- } else {
- /*
- * Frame length=1518; MII mode;
- */
- writel(0x05ee0024, &fec->eth->r_cntrl); /* FIXME 0x05ee0004 */
+ /* Start with frame length = 1518, common for all modes. */
+ rcntrl = PKTSIZE << FEC_RCNTRL_MAX_FL_SHIFT;
+ if (fec->xcv_type == SEVENWIRE)
+ rcntrl |= FEC_RCNTRL_FCE;
+ else if (fec->xcv_type == RMII)
+ rcntrl |= FEC_RCNTRL_RMII;
+ else /* MII mode */
+ rcntrl |= FEC_RCNTRL_FCE | FEC_RCNTRL_MII_MODE;
+
+ writel(rcntrl, &fec->eth->r_cntrl);
+
+ if (fec->xcv_type == MII10 || fec->xcv_type == MII100)
fec_mii_setspeed(fec);
- }
+
/*
* Set Opcode/Pause Duration Register
*/
@@ -468,9 +474,8 @@ static int fec_init(struct eth_device *dev, bd_t* bd)
/* clear MIB RAM */
- long *mib_ptr = (long *)(IMX_FEC_BASE + 0x200);
- while (mib_ptr <= (long *)(IMX_FEC_BASE + 0x2FC))
- *mib_ptr++ = 0;
+ for (i = mib_ptr; i <= mib_ptr + 0xfc; i += 4)
+ writel(0, i);
/* FIFO receive start register */
writel(0x520, &fec->eth->r_fstart);
@@ -504,7 +509,7 @@ static int fec_init(struct eth_device *dev, bd_t* bd)
*/
static void fec_halt(struct eth_device *dev)
{
- struct fec_priv *fec = &gfec;
+ struct fec_priv *fec = (struct fec_priv *)dev->priv;
int counter = 0xffff;
/*
@@ -685,19 +690,32 @@ static int fec_recv(struct eth_device *dev)
return len;
}
-static int fec_probe(bd_t *bd)
+static int fec_probe(bd_t *bd, int dev_id, int phy_id, uint32_t base_addr)
{
struct eth_device *edev;
- struct fec_priv *fec = &gfec;
+ struct fec_priv *fec;
unsigned char ethaddr[6];
+ uint32_t start;
+ int ret = 0;
/* create and fill edev struct */
edev = (struct eth_device *)malloc(sizeof(struct eth_device));
if (!edev) {
- puts("fec_mxc: not enough malloc memory\n");
- return -ENOMEM;
+ puts("fec_mxc: not enough malloc memory for eth_device\n");
+ ret = -ENOMEM;
+ goto err1;
+ }
+
+ fec = (struct fec_priv *)malloc(sizeof(struct fec_priv));
+ if (!fec) {
+ puts("fec_mxc: not enough malloc memory for fec_priv\n");
+ ret = -ENOMEM;
+ goto err2;
}
+
memset(edev, 0, sizeof(*edev));
+ memset(fec, 0, sizeof(*fec));
+
edev->priv = fec;
edev->init = fec_init;
edev->send = fec_send;
@@ -705,15 +723,21 @@ static int fec_probe(bd_t *bd)
edev->halt = fec_halt;
edev->write_hwaddr = fec_set_hwaddr;
- fec->eth = (struct ethernet_regs *)IMX_FEC_BASE;
+ fec->eth = (struct ethernet_regs *)base_addr;
fec->bd = bd;
- fec->xcv_type = MII100;
+ fec->xcv_type = CONFIG_FEC_XCV_TYPE;
/* Reset chip. */
writel(readl(&fec->eth->ecntrl) | FEC_ECNTRL_RESET, &fec->eth->ecntrl);
- while (readl(&fec->eth->ecntrl) & 1)
+ start = get_timer(0);
+ while (readl(&fec->eth->ecntrl) & FEC_ECNTRL_RESET) {
+ if (get_timer(start) > (CONFIG_SYS_HZ * 5)) {
+ printf("FEC MXC: Timeout reseting chip\n");
+ goto err3;
+ }
udelay(10);
+ }
/*
* Set interrupt mask register
@@ -731,29 +755,63 @@ static int fec_probe(bd_t *bd)
/*
* Frame length=1518; MII mode;
*/
- writel(0x05ee0024, &fec->eth->r_cntrl); /* FIXME 0x05ee0004 */
+ writel((PKTSIZE << FEC_RCNTRL_MAX_FL_SHIFT) | FEC_RCNTRL_FCE |
+ FEC_RCNTRL_MII_MODE, &fec->eth->r_cntrl);
fec_mii_setspeed(fec);
- sprintf(edev->name, "FEC");
+ if (dev_id == -1) {
+ sprintf(edev->name, "FEC");
+ fec->dev_id = 0;
+ } else {
+ sprintf(edev->name, "FEC%i", dev_id);
+ fec->dev_id = dev_id;
+ }
+ fec->phy_id = phy_id;
miiphy_register(edev->name, fec_miiphy_read, fec_miiphy_write);
eth_register(edev);
if (fec_get_hwaddr(edev, ethaddr) == 0) {
- printf("got MAC address from fuse: %pM\n", ethaddr);
+ debug("got MAC address from fuse: %pM\n", ethaddr);
memcpy(edev->enetaddr, ethaddr, 6);
}
- return 0;
+ return ret;
+
+err3:
+ free(fec);
+err2:
+ free(edev);
+err1:
+ return ret;
}
+#ifndef CONFIG_FEC_MXC_MULTI
int fecmxc_initialize(bd_t *bd)
{
int lout = 1;
debug("eth_init: fec_probe(bd)\n");
- lout = fec_probe(bd);
+ lout = fec_probe(bd, -1, CONFIG_FEC_MXC_PHYADDR, IMX_FEC_BASE);
return lout;
}
+#endif
+
+int fecmxc_initialize_multi(bd_t *bd, int dev_id, int phy_id, uint32_t addr)
+{
+ int lout = 1;
+
+ debug("eth_init: fec_probe(bd, %i, %i) @ %08x\n", dev_id, phy_id, addr);
+ lout = fec_probe(bd, dev_id, phy_id, addr);
+
+ return lout;
+}
+
+int fecmxc_register_mii_postcall(struct eth_device *dev, int (*cb)(int))
+{
+ struct fec_priv *fec = (struct fec_priv *)dev->priv;
+ fec->mii_postcall = cb;
+ return 0;
+}
diff --git a/drivers/net/fec_mxc.h b/drivers/net/fec_mxc.h
index 1ba5161..8b26645 100644
--- a/drivers/net/fec_mxc.h
+++ b/drivers/net/fec_mxc.h
@@ -32,6 +32,8 @@
#ifndef __FEC_MXC_H
#define __FEC_MXC_H
+void imx_get_mac_from_fuse(unsigned char *mac);
+
/**
* Layout description of the FEC
*/
@@ -194,6 +196,7 @@ struct ethernet_regs {
#define FEC_RCNTRL_PROM 0x00000008
#define FEC_RCNTRL_BC_REJ 0x00000010
#define FEC_RCNTRL_FCE 0x00000020
+#define FEC_RCNTRL_RMII 0x00000100
#define FEC_TCNTRL_GTS 0x00000001
#define FEC_TCNTRL_HBC 0x00000002
@@ -257,7 +260,8 @@ struct fec_bd {
enum xceiver_type {
SEVENWIRE, /* 7-wire */
MII10, /* MII 10Mbps */
- MII100 /* MII 100Mbps */
+ MII100, /* MII 100Mbps */
+ RMII /* RMII */
};
/**
@@ -273,6 +277,9 @@ struct fec_priv {
bd_t *bd;
void *rdb_ptr;
void *base_ptr;
+ int dev_id;
+ int phy_id;
+ int (*mii_postcall)(int);
};
/**
diff --git a/drivers/power/twl6030.c b/drivers/power/twl6030.c
index fef57b4..c5a0038 100644
--- a/drivers/power/twl6030.c
+++ b/drivers/power/twl6030.c
@@ -182,6 +182,13 @@ void twl6030_init_battery_charging(void)
return;
}
+void twl6030_power_mmc_init()
+{
+ /* set voltage to 3.0 and turnon for APP */
+ twl6030_i2c_write_u8(TWL6030_CHIP_PM, 0x15, VMMC_CFG_VOLTATE);
+ twl6030_i2c_write_u8(TWL6030_CHIP_PM, 0x21, VMMC_CFG_STATE);
+}
+
void twl6030_usb_device_settings()
{
u8 data = 0;
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index ca27745..df440c6 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -30,6 +30,7 @@ LIB = $(obj)librtc.o
COBJS-$(CONFIG_RTC_AT91SAM9_RTT) += at91sam9_rtt.o
COBJS-$(CONFIG_RTC_BFIN) += bfin_rtc.o
COBJS-y += date.o
+COBJS-$(CONFIG_RTC_DAVINCI) += davinci.o
COBJS-$(CONFIG_RTC_DS12887) += ds12887.o
COBJS-$(CONFIG_RTC_DS1302) += ds1302.o
COBJS-$(CONFIG_RTC_DS1306) += ds1306.o
diff --git a/drivers/rtc/davinci.c b/drivers/rtc/davinci.c
new file mode 100644
index 0000000..8436cbf
--- /dev/null
+++ b/drivers/rtc/davinci.c
@@ -0,0 +1,125 @@
+/*
+ * (C) Copyright 2011 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <command.h>
+#include <rtc.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+
+#if defined(CONFIG_CMD_DATE)
+struct davinci_rtc {
+ u_int32_t second;
+ u_int32_t minutes;
+ u_int32_t hours;
+ u_int32_t day;
+ u_int32_t month; /* 0x10 */
+ u_int32_t year;
+ u_int32_t dotw;
+ u_int32_t resv1;
+ u_int32_t alarmsecond; /* 0x20 */
+ u_int32_t alarmminute;
+ u_int32_t alarmhour;
+ u_int32_t alarmday;
+ u_int32_t alarmmonth; /* 0x30 */
+ u_int32_t alarmyear;
+ u_int32_t resv2[2];
+ u_int32_t ctrl; /* 0x40 */
+ u_int32_t status;
+ u_int32_t irq;
+};
+
+#define RTC_STATE_BUSY 0x01
+#define RTC_STATE_RUN 0x02
+
+#define davinci_rtc_base ((struct davinci_rtc *)DAVINCI_RTC_BASE)
+
+int rtc_get(struct rtc_time *tmp)
+{
+ struct davinci_rtc *rtc = davinci_rtc_base;
+ unsigned long sec, min, hour, mday, wday, mon_cent, year;
+ unsigned long status;
+
+ status = readl(&rtc->status);
+ if ((status & RTC_STATE_RUN) != RTC_STATE_RUN) {
+ printf("RTC doesn't run\n");
+ return -1;
+ }
+ if ((status & RTC_STATE_BUSY) == RTC_STATE_BUSY)
+ udelay(20);
+
+ sec = readl(&rtc->second);
+ min = readl(&rtc->minutes);
+ hour = readl(&rtc->hours);
+ mday = readl(&rtc->day);
+ wday = readl(&rtc->dotw);
+ mon_cent = readl(&rtc->month);
+ year = readl(&rtc->year);
+
+ debug("Get RTC year: %02lx mon/cent: %02lx mday: %02lx wday: %02lx "
+ "hr: %02lx min: %02lx sec: %02lx\n",
+ year, mon_cent, mday, wday,
+ hour, min, sec);
+
+ tmp->tm_sec = bcd2bin(sec & 0x7F);
+ tmp->tm_min = bcd2bin(min & 0x7F);
+ tmp->tm_hour = bcd2bin(hour & 0x3F);
+ tmp->tm_mday = bcd2bin(mday & 0x3F);
+ tmp->tm_mon = bcd2bin(mon_cent & 0x1F);
+ tmp->tm_year = bcd2bin(year) + 2000;
+ tmp->tm_wday = bcd2bin(wday & 0x07);
+ tmp->tm_yday = 0;
+ tmp->tm_isdst = 0;
+
+ debug("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
+ tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
+ tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+
+ return 0;
+}
+
+int rtc_set(struct rtc_time *tmp)
+{
+ struct davinci_rtc *rtc = davinci_rtc_base;
+
+ debug("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
+ tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
+ tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
+ writel(bin2bcd(tmp->tm_year % 100), &rtc->year);
+ writel(bin2bcd(tmp->tm_mon), &rtc->month);
+
+ writel(bin2bcd(tmp->tm_wday), &rtc->dotw);
+ writel(bin2bcd(tmp->tm_mday), &rtc->day);
+ writel(bin2bcd(tmp->tm_hour), &rtc->hours);
+ writel(bin2bcd(tmp->tm_min), &rtc->minutes);
+ writel(bin2bcd(tmp->tm_sec), &rtc->second);
+ return 0;
+}
+
+void rtc_reset(void)
+{
+ struct davinci_rtc *rtc = davinci_rtc_base;
+
+ /* run RTC counter */
+ writel(0x01, &rtc->ctrl);
+}
+#endif
diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index 710092d..fbcbdb3 100644
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -181,7 +181,7 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"loadaddr=0x82000000\0" \
- "console=ttyS2,115200n8\0" \
+ "console=ttyO2,115200n8\0" \
"mmcdev=0\0" \
"vram=12M\0" \
"dvimode=1024x768MR-16@60\0" \
@@ -308,4 +308,50 @@
CONFIG_SYS_INIT_RAM_SIZE - \
GENERATED_GBL_DATA_SIZE)
+/* SRAM config */
+#define CONFIG_SYS_SRAM_START 0x40200000
+#define CONFIG_SYS_SRAM_SIZE 0x10000
+
+/* Defines for SPL */
+#define CONFIG_SPL
+#define CONFIG_SPL_NAND_SIMPLE
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBDISK_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_POWER_SUPPORT
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
+
+#define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/
+#define CONFIG_SPL_MAX_SIZE 0xB400 /* 45 K */
+#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
+
+#define CONFIG_SPL_BSS_START_ADDR 0x80000000 /*CONFIG_SYS_SDRAM_BASE*/
+#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
+
+/* NAND boot config */
+#define CONFIG_SYS_NAND_PAGE_COUNT 64
+#define CONFIG_SYS_NAND_PAGE_SIZE 2048
+#define CONFIG_SYS_NAND_OOBSIZE 64
+#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
+#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
+#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\
+ 10, 11, 12, 13}
+
+#define CONFIG_SYS_NAND_ECCSIZE 512
+#define CONFIG_SYS_NAND_ECCBYTES 3
+
+#define CONFIG_SYS_NAND_ECCSTEPS (CONFIG_SYS_NAND_PAGE_SIZE / \
+ CONFIG_SYS_NAND_ECCSIZE)
+#define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \
+ CONFIG_SYS_NAND_ECCSTEPS)
+
+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
+
+#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
+#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x200000
+
#endif /* __CONFIG_H */
diff --git a/include/configs/efikamx.h b/include/configs/efikamx.h
index b90e342..54f48e4 100644
--- a/include/configs/efikamx.h
+++ b/include/configs/efikamx.h
@@ -31,6 +31,10 @@
*/
/* An i.MX51 CPU */
#define CONFIG_MX51
+
+#define machine_is_efikamx() (CONFIG_MACH_TYPE == MACH_TYPE_MX51_EFIKAMX)
+#define machine_is_efikasb() (CONFIG_MACH_TYPE == MACH_TYPE_MX51_EFIKASB)
+
#include <asm/arch/imx-regs.h>
#define CONFIG_SYS_MX5_HCLK 24000000
@@ -230,6 +234,6 @@
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
#define CONFIG_SYS_DDR_CLKSEL 0
-#define CONFIG_SYS_CLKTL_CBCDR 0x59E35100
+#define CONFIG_SYS_CLKTL_CBCDR 0x59E35145
#endif
diff --git a/include/configs/gplugd.h b/include/configs/gplugd.h
index cc14f49..5f72163 100644
--- a/include/configs/gplugd.h
+++ b/include/configs/gplugd.h
@@ -62,8 +62,34 @@
#define CONFIG_CMD_I2C
#define CONFIG_CMD_AUTOSCRIPT
#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
+
+/* Disable DCACHE */
+#define CONFIG_SYS_DCACHE_OFF
+
+/* Network configuration */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_NET_MULTI
+#define CONFIG_ARMADA100_FEC
+
+/* DHCP Support */
+#define CONFIG_CMD_DHCP
+#define CONFIG_BOOTP_DHCP_REQUEST_DELAY 50000
+#endif /* CONFIG_CMD_NET */
+
+/* GPIO Support */
+#define CONFIG_MARVELL_GPIO
+
+/* PHY configuration */
+#define CONFIG_MII
+#define CONFIG_CMD_MII
+#define CONFIG_RESET_PHY_R
+/* 88E3015 register definition */
+#define PHY_LED_PAR_SEL_REG 22
+#define PHY_LED_MAN_REG 25
+#define PHY_LED_VAL 0x5b /* LINK LED1, ACT LED2 */
+/* GPIO Configuration for PHY */
+#define CONFIG_SYS_GPIO_PHY_RST 104 /* GPIO104 */
/*
* mv-common.h should be defined after CMD configs since it used them
diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h
index b7f1cb3..5e976bc 100644
--- a/include/configs/imx31_litekit.h
+++ b/include/configs/imx31_litekit.h
@@ -41,6 +41,8 @@
#define CONFIG_SYS_TEXT_BASE 0xa0000000
+#define CONFIG_MACH_TYPE MACH_TYPE_MX31LITE
+
/* Temporarily disabled */
#if 0
#define CONFIG_OF_LIBFDT 1
@@ -150,7 +152,7 @@
#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024)
#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_SYS_SDRAM_BASE CSD0_BASE
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h
new file mode 100644
index 0000000..0afae24
--- /dev/null
+++ b/include/configs/mx25pdk.h
@@ -0,0 +1,108 @@
+/*
+ * (C) Copyright 2011 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* High Level Configuration Options */
+
+#define CONFIG_MX25_CLK32 32768 /* OSC32K frequency */
+#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_TEXT_BASE 0x81200000
+
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+
+#define CONFIG_MACH_TYPE MACH_TYPE_MX25_3DS
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
+
+/* Physical Memory Map */
+
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM_1 0x80000000
+#define PHYS_SDRAM_1_SIZE (64 * 1024 * 1024)
+
+#define CONFIG_BOARD_EARLY_INIT_F
+
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
+ GENERATED_GBL_DATA_SIZE)
+
+/* Memory Test */
+#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE/2)
+#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE)
+
+/* Stack sizes */
+#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
+
+/* Serial Info */
+#define CONFIG_MXC_UART
+#define CONFIG_SYS_MX25_UART1
+#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
+#define CONFIG_BAUDRATE 115200 /* Default baud rate */
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/* No NOR flash present */
+#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
+#define CONFIG_ENV_SIZE (8 * 1024)
+#define CONFIG_ENV_IS_NOWHERE
+
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_SYS_64BIT_VSPRINTF
+
+/* U-Boot general configuration */
+#define CONFIG_SYS_PROMPT "MX25PDK U-Boot > "
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+/* Print buffer sz */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_SYS_LONGHELP
+
+/* U-Boot commands */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_CACHE
+
+/* Ethernet */
+#define CONFIG_FEC_MXC
+#define CONFIG_FEC_MXC_PHYADDR 0x1f
+#define CONFIG_MII
+#define CONFIG_CMD_NET
+#define CONFIG_NET_MULTI
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_BOOTDELAY 3
+
+#define CONFIG_LOADADDR 0x81000000 /* loadaddr env var */
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "script=boot.scr\0" \
+ "uimage=uImage\0" \
+ "netargs=setenv bootargs console=ttymxc0,${baudrate} " \
+ "root=/dev/nfs " \
+ "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
+ "bootcmd=run netargs; dhcp ${uimage}; bootm\0" \
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h
index adb2ee1..0bea858 100644
--- a/include/configs/mx31ads.h
+++ b/include/configs/mx31ads.h
@@ -35,6 +35,8 @@
#define CONFIG_SYS_TEXT_BASE 0xA0000000
+#define CONFIG_MACH_TYPE MACH_TYPE_MX31ADS
+
/*
* Disabled for now due to build problems under Debian and a significant increase
* in the final file size: 144260 vs. 109536 Bytes.
diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h
index 1a5bdd1..cd156d8 100644
--- a/include/configs/mx31pdk.h
+++ b/include/configs/mx31pdk.h
@@ -45,6 +45,8 @@
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
+#define CONFIG_MACH_TYPE MACH_TYPE_MX31_3DS
+
#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
#define CONFIG_SKIP_LOWLEVEL_INIT
#endif
@@ -124,7 +126,7 @@
* Miscellaneous configurable options
*/
#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "uboot> "
+#define CONFIG_SYS_PROMPT "MX31PDK U-Boot > "
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h
index 7d05dc8..d62a4f2 100644
--- a/include/configs/mx51evk.h
+++ b/include/configs/mx51evk.h
@@ -48,6 +48,7 @@
#define CONFIG_OF_LIBFDT 1
+#define CONFIG_MACH_TYPE MACH_TYPE_MX51_BABBAGE
/*
* Size of malloc() pool
*/
diff --git a/include/configs/mx53ard.h b/include/configs/mx53ard.h
index c0b8d6a..26fc219 100644
--- a/include/configs/mx53ard.h
+++ b/include/configs/mx53ard.h
@@ -29,6 +29,8 @@
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_MACH_TYPE MACH_TYPE_MX53_ARD
+
#include <asm/arch/imx-regs.h>
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h
index 7fb1d9a..b127b06 100644
--- a/include/configs/mx53evk.h
+++ b/include/configs/mx53evk.h
@@ -29,6 +29,8 @@
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_MACH_TYPE MACH_TYPE_MX53_EVK
+
#include <asm/arch/imx-regs.h>
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
index cfb38a5..4091703 100644
--- a/include/configs/mx53loco.h
+++ b/include/configs/mx53loco.h
@@ -30,6 +30,8 @@
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_MACH_TYPE MACH_TYPE_MX53_LOCO
+
#include <asm/arch/imx-regs.h>
#define CONFIG_CMDLINE_TAG
diff --git a/include/configs/mx53smd.h b/include/configs/mx53smd.h
index 49f8c6e..261f0bc 100644
--- a/include/configs/mx53smd.h
+++ b/include/configs/mx53smd.h
@@ -1,7 +1,7 @@
/*
* Copyright (C) 2011 Freescale Semiconductor, Inc.
*
- * Configuration settings for the MX53-SMDFreescale board.
+ * Configuration settings for the MX53SMD Freescale board.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -29,6 +29,8 @@
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_MACH_TYPE MACH_TYPE_MX53_SMD
+
#include <asm/arch/imx-regs.h>
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
index fdc861d..7af30c2 100644
--- a/include/configs/omap3_evm.h
+++ b/include/configs/omap3_evm.h
@@ -200,7 +200,7 @@
"loadaddr=0x82000000\0" \
"usbtty=cdc_acm\0" \
"mmcdev=0\0" \
- "console=ttyS2,115200n8\0" \
+ "console=ttyO0,115200n8\0" \
"mmcargs=setenv bootargs console=${console} " \
"root=/dev/mmcblk0p2 rw " \
"rootfstype=ext3 rootwait\0" \
diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h
index d8ac8c0..228eac5 100644
--- a/include/configs/omap4_common.h
+++ b/include/configs/omap4_common.h
@@ -98,7 +98,9 @@
#define CONFIG_I2C_MULTI_BUS 1
/* TWL6030 */
+#ifndef CONFIG_SPL_BUILD
#define CONFIG_TWL6030_POWER 1
+#endif
/* MMC */
#define CONFIG_GENERIC_MMC 1
diff --git a/include/configs/omap4_sdp4430.h b/include/configs/omap4_sdp4430.h
index 39d7154..9e03291 100644
--- a/include/configs/omap4_sdp4430.h
+++ b/include/configs/omap4_sdp4430.h
@@ -37,7 +37,9 @@
#include <configs/omap4_common.h>
/* Battery Charger */
+#ifndef CONFIG_SPL_BUILD
#define CONFIG_CMD_BAT 1
+#endif
/* ENV related config options */
#define CONFIG_ENV_IS_IN_MMC 1
diff --git a/include/configs/vision2.h b/include/configs/vision2.h
index b5c7357..d95c0ba 100644
--- a/include/configs/vision2.h
+++ b/include/configs/vision2.h
@@ -41,6 +41,8 @@
#define CONFIG_INITRD_TAG
#define BOARD_LATE_INIT
+#define CONFIG_MACH_TYPE MACH_TYPE_TTC_VISION2
+
/*
* Size of malloc() pool
*/
diff --git a/include/configs/zmx25.h b/include/configs/zmx25.h
index 374c88a..ab7f30f 100644
--- a/include/configs/zmx25.h
+++ b/include/configs/zmx25.h
@@ -32,6 +32,7 @@
#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_TEXT_BASE 0xA0000000
+#define CONFIG_MACH_TYPE MACH_TYPE_ZMX25
/*
* Environment settings
*/
diff --git a/include/nand.h b/include/nand.h
index 8d94b5c..b4140794 100644
--- a/include/nand.h
+++ b/include/nand.h
@@ -132,6 +132,12 @@ int nand_lock( nand_info_t *meminfo, int tight );
int nand_unlock( nand_info_t *meminfo, ulong start, ulong length );
int nand_get_lock_status(nand_info_t *meminfo, loff_t offset);
+int nand_spl_load_image(uint32_t offs, unsigned int size, void *dst);
+void nand_deselect(void);
+
+void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len);
+void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len);
+
#ifdef CONFIG_SYS_NAND_SELECT_DEVICE
void board_nand_select_device(struct nand_chip *nand, int chip);
#endif
diff --git a/include/netdev.h b/include/netdev.h
index 96c7b9b..480453e 100644
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -61,8 +61,8 @@ int ep93xx_eth_initialize(u8 dev_num, int base_addr);
int eth_3com_initialize (bd_t * bis);
int ethoc_initialize(u8 dev_num, int base_addr);
int fec_initialize (bd_t *bis);
-int fecmxc_initialize (bd_t *bis);
int fecmxc_initialize(bd_t *bis);
+int fecmxc_initialize_multi(bd_t *bis, int dev_id, int phy_id, uint32_t addr);
int ftgmac100_initialize(bd_t *bits);
int ftmac100_initialize(bd_t *bits);
int greth_initialize(bd_t *bis);
@@ -94,6 +94,7 @@ int smc911x_initialize(u8 dev_num, int base_addr);
int tsi108_eth_initialize(bd_t *bis);
int uec_standard_init(bd_t *bis);
int uli526x_initialize(bd_t *bis);
+int armada100_fec_register(unsigned long base_addr);
int xilinx_emaclite_initialize (bd_t *bis, int base_addr);
/* Boards with PCI network controllers can call this from their board_eth_init()
@@ -185,4 +186,9 @@ struct mv88e61xx_config {
int mv88e61xx_switch_initialize(struct mv88e61xx_config *swconfig);
#endif /* CONFIG_MV88E61XX_SWITCH */
+/*
+ * Allow FEC to fine-tune MII configuration on boards which require this.
+ */
+int fecmxc_register_mii_postcall(struct eth_device *dev, int (*cb)(int));
+
#endif /* _NETDEV_H_ */
diff --git a/include/twl6030.h b/include/twl6030.h
index 6ed68a0..a9fcadb 100644
--- a/include/twl6030.h
+++ b/include/twl6030.h
@@ -33,6 +33,8 @@
#define TWL6030_CHIP_PWM 0x49
/* Slave Address 0x48 */
+#define VMMC_CFG_STATE 0x9A
+#define VMMC_CFG_VOLTATE 0x9B
#define VUSB_CFG_STATE 0xA2
#define MISC1 0xE4
@@ -130,3 +132,4 @@ void twl6030_start_usb_charging(void);
void twl6030_stop_usb_charging(void);
int twl6030_get_battery_voltage(void);
int twl6030_get_battery_current(void);
+void twl6030_power_mmc_init(void);
diff --git a/nand_spl/board/freescale/mx31pdk/Makefile b/nand_spl/board/freescale/mx31pdk/Makefile
index e6ec10a..87784d2 100644
--- a/nand_spl/board/freescale/mx31pdk/Makefile
+++ b/nand_spl/board/freescale/mx31pdk/Makefile
@@ -1,7 +1,7 @@
CONFIG_NAND_SPL = y
+PAD_TO := 2048
include $(TOPDIR)/config.mk
-include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk
nandobj := $(OBJTREE)/nand_spl/
diff --git a/nand_spl/board/freescale/mx31pdk/config.mk b/nand_spl/board/freescale/mx31pdk/config.mk
deleted file mode 100644
index 68afbf1..0000000
--- a/nand_spl/board/freescale/mx31pdk/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-PAD_TO := 2048
diff --git a/spl/Makefile b/spl/Makefile
index 95ecce1..b44e84d 100644
--- a/spl/Makefile
+++ b/spl/Makefile
@@ -46,6 +46,8 @@ LIBS-$(CONFIG_SPL_SPI_FLASH_SUPPORT) += drivers/mtd/spi/libspi_flash.o
LIBS-$(CONFIG_SPL_SPI_SUPPORT) += drivers/spi/libspi.o
LIBS-$(CONFIG_SPL_FAT_SUPPORT) += fs/fat/libfat.o
LIBS-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/libgeneric.o
+LIBS-$(CONFIG_SPL_POWER_SUPPORT) += drivers/power/libpower.o
+LIBS-$(CONFIG_SPL_NAND_SUPPORT) += drivers/mtd/nand/libnand.o
ifeq ($(SOC),omap3)
LIBS-y += $(CPUDIR)/omap-common/libomap-common.o