summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Makefile4
-rw-r--r--common/image.c1
-rw-r--r--doc/README.imximage188
-rw-r--r--include/image.h1
-rw-r--r--tools/Makefile2
-rw-r--r--tools/imximage.c324
-rw-r--r--tools/imximage.h105
-rw-r--r--tools/mkimage.c2
-rw-r--r--tools/mkimage.h1
9 files changed, 628 insertions, 0 deletions
diff --git a/Makefile b/Makefile
index 0f60925..722b976 100644
--- a/Makefile
+++ b/Makefile
@@ -324,6 +324,10 @@ $(obj)u-boot.img: $(obj)u-boot.bin
sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \
-d $< $@
+$(obj)u-boot.imx: $(obj)u-boot.bin
+ $(obj)tools/mkimage -n $(IMX_CONFIG) -T imximage \
+ -e $(TEXT_BASE) -d $< $@
+
$(obj)u-boot.kwb: $(obj)u-boot.bin
$(obj)tools/mkimage -n $(KWD_CONFIG) -T kwbimage \
-a $(TEXT_BASE) -e $(TEXT_BASE) -d $< $@
diff --git a/common/image.c b/common/image.c
index 82e7aa4..9e49713 100644
--- a/common/image.c
+++ b/common/image.c
@@ -140,6 +140,7 @@ static table_entry_t uimage_type[] = {
{ IH_TYPE_STANDALONE, "standalone", "Standalone Program", },
{ IH_TYPE_FLATDT, "flat_dt", "Flat Device Tree", },
{ IH_TYPE_KWBIMAGE, "kwbimage", "Kirkwood Boot Image",},
+ { IH_TYPE_IMXIMAGE, "imximage", "Freescale i.MX Boot Image",},
{ -1, "", "", },
};
diff --git a/doc/README.imximage b/doc/README.imximage
new file mode 100644
index 0000000..9048ef6
--- /dev/null
+++ b/doc/README.imximage
@@ -0,0 +1,188 @@
+---------------------------------------------
+Imximage Boot Image generation using mkimage
+---------------------------------------------
+
+This document describes how to set up a U-Boot image
+that can be booted by Freescale MX25, MX35 and MX51
+processors via internal boot mode.
+
+These processors can boot directly from NAND, SPI flash and SD card flash
+using its internal boot ROM support. They can boot from an internal
+UART, if booting from device media fails.
+Booting from NOR flash does not require to use this image type.
+
+For more details refer Chapter 2 - System Boot and section 2.14
+(flash header description) of the processor's manual.
+
+This implementation does not use at the moment the secure boot feature
+of the processor. The image is generated disabling all security fields.
+
+Command syntax:
+--------------
+./tools/mkimage -l <mx u-boot_file>
+ to list the imx image file details
+
+./tools/mkimage -T imximage \
+ -n <board specific configuration file> \
+ -e <execution address> -d <u-boot binary> <output image file>
+
+For example, for the mx51evk board:
+./tools/mkimage -n ./board/freescale/mx51evk/imximage.cfg \
+ -T imximage -e 0x97800000 \
+ -d u-boot.bin u-boot.imx
+
+You can generate directly the image when you compile u-boot with:
+
+$ make u-boot.imx
+
+The output image can be flashed on the board SPI flash or on a SD card.
+In both cases, you have to copy the image at the offset required for the
+chosen media devices (0x400 for both SPI flash or SD card).
+
+Please check Freescale documentation for further details.
+
+Board specific configuration file specifications:
+-------------------------------------------------
+1. This file must present in the $(BOARDDIR) and the name should be
+ imximage.cfg (since this is used in Makefile).
+2. This file can have empty lines and lines starting with "#" as first
+ character to put comments.
+3. This file can have configuration command lines as mentioned below,
+ any other information in this file is treated as invalid.
+
+Configuration command line syntax:
+---------------------------------
+1. Each command line is must have two strings, first one command or address
+ and second one data string
+2. Following are the valid command strings and associated data strings:-
+ Command string data string
+ -------------- -----------
+ BOOT_FROM nand/spi/sd/onenand
+ Example:
+ BOOT_FROM spi
+ DATA type address value
+
+ type: word=4, halfword=2, byte=1
+ address: physycal register address
+ value: value to be set in register
+ All values are in in hexadecimal.
+ Example (write to IOMUXC):
+ DATA 4 0x73FA88a0 0x200
+
+The processor support up to 60 register programming commands. An error
+is generated if more commands are found in the configuration file.
+
+3. All commands are optional to program.
+
+Setup a SD Card for booting
+--------------------------------
+
+The following example prepare a SD card with u-boot and a FAT partition
+to be used to stored the kernel to be booted.
+I will set the SD in the most compatible mode, setting it with
+255 heads and 63 sectors, as suggested from several documentation and
+howto on line (I took as reference the preparation of a SD Card for the
+Beagleboard, running u-boot as bootloader).
+
+You should start clearing the partitions table on the SD card. Because
+the u-boot image must be stored at the offset 0x400, it must be assured
+that there is no partition at that address. A new SD card is already
+formatted with FAT filesystem and the partition starts from the first
+cylinder, so we need to change it.
+
+You can do all steps with fdisk. If the device for the SD card is
+/dev/mmcblk0, the following commands make the job:
+
+1. Start the fdisk utility (as superuser)
+ fdisk /dev/mmcblk0
+
+2. Clear the actual partition
+
+Command (m for help): o
+
+3. Print card info:
+
+Command (m for help): p
+Disk /dev/mmcblk0: 1981 MB, 1981284352 bytes
+
+In my case, I have a 2 GB card. I need the size to set later the correct value
+for the cylinders.
+
+4. Go to expert mode:
+
+Command (m for help): x
+
+5. Set card geometry
+
+Expert command (m for help): h
+Number of heads (1-256, default 4): 255
+
+Expert command (m for help): s
+Number of sectors (1-63, default 16): 63
+Warning: setting sector offset for DOS compatiblity
+
+We have set 255 heads, 63 sector. We have to set the cylinder.
+The value to be set can be calculated with:
+
+ cilynder = <total size> / <heads> / <sectors> / <blocksize>
+
+in this example,
+ 1981284352 / 255 / 63 / 512 = 239.x = 239
+
+
+Expert command (m for help): c
+Number of cylinders (1-1048576, default 60032): 239
+
+6. Leave the expert mode
+Expert command (m for help): r
+
+7. Set up a partition
+
+Now set a partition table to store the kernel or whatever you want. Of course,
+you can set additional partitions to store rootfs, data, etc.
+In my example I want to set a single partition. I must take care
+to not overwrite the space where I will put u-boot.
+
+Command (m for help): n
+Command action
+ e extended
+ p primary partition (1-4)
+p
+Partition number (1-4): 1
+First cylinder (1-239, default 1): 3
+Last cylinder, +cylinders or +size{K,M,G} (3-239, default 239): +100M
+
+Command (m for help): p
+
+Disk /dev/mmcblk0: 1967 MB, 1967128576 bytes
+255 heads, 63 sectors/track, 239 cylinders
+Units = cylinders of 16065 * 512 = 8225280 bytes
+Disk identifier: 0xb712a870
+
+ Device Boot Start End Blocks Id System
+/dev/mmcblk0p1 3 16 112455 83 Linux
+
+I have set 100MB, leaving the first 2 sectors free. I will copy u-boot
+there.
+
+8. Write the partition table and exit.
+
+Command (m for help): w
+The partition table has been altered!
+
+Calling ioctl() to re-read partition table.
+
+9. Copy u-boot.imx on the SD card
+
+I use dd:
+
+dd if=u-boot.imx of=/dev/mmcblk0 bs=512 seek=2
+
+This command copies the u-boot image at the address 0x400, as required
+by the processor.
+
+Now remove your card from the PC and go to the target. If evrything went right,
+the u-boot prompt should come after power on.
+
+------------------------------------------------
+Author: Stefano babic <sbabic@denx.de>
diff --git a/include/image.h b/include/image.h
index acc553c..541cac9 100644
--- a/include/image.h
+++ b/include/image.h
@@ -156,6 +156,7 @@
#define IH_TYPE_FILESYSTEM 7 /* Filesystem Image (any type) */
#define IH_TYPE_FLATDT 8 /* Binary Flat Device Tree Blob */
#define IH_TYPE_KWBIMAGE 9 /* Kirkwood Boot Image */
+#define IH_TYPE_IMXIMAGE 10 /* Freescale IMXBoot Image */
/*
* Compression Types
diff --git a/tools/Makefile b/tools/Makefile
index d3b1518..f8b69de 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -82,6 +82,7 @@ OBJ_FILES-$(CONFIG_CMD_NET) += gen_eth_addr.o
OBJ_FILES-$(CONFIG_CMD_LOADS) += img2srec.o
OBJ_FILES-$(CONFIG_INCA_IP) += inca-swap-bytes.o
NOPED_OBJ_FILES-y += kwbimage.o
+NOPED_OBJ_FILES-y += imximage.o
NOPED_OBJ_FILES-y += mkimage.o
OBJ_FILES-$(CONFIG_NETCONSOLE) += ncb.o
NOPED_OBJ_FILES-y += os_support.o
@@ -167,6 +168,7 @@ $(obj)mkimage$(SFX): $(obj)crc32.o \
$(obj)default_image.o \
$(obj)fit_image.o \
$(obj)image.o \
+ $(obj)imximage.o \
$(obj)kwbimage.o \
$(obj)md5.o \
$(obj)mkimage.o \
diff --git a/tools/imximage.c b/tools/imximage.c
new file mode 100644
index 0000000..c1fdafb
--- /dev/null
+++ b/tools/imximage.c
@@ -0,0 +1,324 @@
+/*
+ * (C) Copyright 2009
+ * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
+ *
+ * (C) Copyright 2008
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include "mkimage.h"
+#include <image.h>
+#include "imximage.h"
+
+/*
+ * Supported commands for configuration file
+ */
+static table_entry_t imximage_cmds[] = {
+ {CMD_BOOT_FROM, "BOOT_FROM", "boot comand", },
+ {CMD_DATA, "DATA", "Reg Write Data", },
+ {-1, "", "", },
+};
+
+/*
+ * Supported Boot options for configuration file
+ * this is needed to set the correct flash offset
+ */
+static table_entry_t imximage_bootops[] = {
+ {FLASH_OFFSET_SPI, "spi", "SPI Flash", },
+ {FLASH_OFFSET_NAND, "nand", "NAND Flash", },
+ {FLASH_OFFSET_SD, "sd", "SD Card", },
+ {FLASH_OFFSET_ONENAND, "onenand", "OneNAND Flash",},
+ {-1, "", "Invalid", },
+};
+
+
+static struct imx_header imximage_header;
+
+static uint32_t get_cfg_value(char *token, char *name, int linenr)
+{
+ char *endptr;
+ uint32_t value;
+
+ errno = 0;
+ value = strtoul(token, &endptr, 16);
+ if (errno || (token == endptr)) {
+ fprintf(stderr, "Error: %s[%d] - Invalid hex data(%s)\n",
+ name, linenr, token);
+ exit(EXIT_FAILURE);
+ }
+ return value;
+}
+
+static int imximage_check_image_types(uint8_t type)
+{
+ if (type == IH_TYPE_IMXIMAGE)
+ return EXIT_SUCCESS;
+ else
+ return EXIT_FAILURE;
+}
+
+static int imximage_verify_header(unsigned char *ptr, int image_size,
+ struct mkimage_params *params)
+{
+
+ struct imx_header *imx_hdr = (struct imx_header *) ptr;
+ flash_header_t *hdr = &imx_hdr->fhdr;
+
+ /* Only a few checks can be done: search for magic numbers */
+ if (hdr->app_code_barker != APP_CODE_BARKER)
+ return -FDT_ERR_BADSTRUCTURE;
+
+ if (imx_hdr->dcd_table.preamble.barker != DCD_BARKER)
+ return -FDT_ERR_BADSTRUCTURE;
+
+ return 0;
+}
+
+static void imximage_print_header(const void *ptr)
+{
+ struct imx_header *imx_hdr = (struct imx_header *) ptr;
+ flash_header_t *hdr = &imx_hdr->fhdr;
+ uint32_t size;
+ flash_cfg_parms_t *ext_header;
+
+ size = imx_hdr->dcd_table.preamble.length;
+ if (size > (MAX_HW_CFG_SIZE * sizeof(dcd_type_addr_data_t))) {
+ fprintf(stderr,
+ "Error: Image corrupt DCD size %d exceed maximum %d\n",
+ size / sizeof(dcd_type_addr_data_t), MAX_HW_CFG_SIZE);
+ exit(EXIT_FAILURE);
+ }
+
+ ext_header = (flash_cfg_parms_t *) ((uint32_t)&imx_hdr->dcd_table +
+ sizeof(dcd_preamble_t) + size);
+
+ printf("Image Type: Freescale IMX Boot Image\n");
+ printf("Data Size: ");
+ genimg_print_size(ext_header->length);
+ printf("Load Address: %08x\n", (unsigned int)hdr->app_dest_ptr);
+ printf("Entry Point: %08x\n", (unsigned int)hdr->app_code_jump_vector);
+}
+
+static uint32_t imximage_parse_cfg_file(struct imx_header *imxhdr, char *name)
+{
+ FILE *fd = NULL;
+ char *line = NULL;
+ char *token, *saveptr1, *saveptr2;
+ int lineno = 0;
+ int fld, value;
+ uint32_t len;
+ int dcd_len = 0;
+ dcd_t *dcd = &imxhdr->dcd_table;
+ int32_t cmd;
+
+ fd = fopen(name, "r");
+ if (fd == 0) {
+ fprintf(stderr, "Error: %s - Can't open DCD file\n", name);
+ exit(EXIT_FAILURE);
+ }
+
+ /* Very simple parsing, line starting with # are comments
+ * and are dropped
+ */
+ while ((getline(&line, &len, fd)) > 0) {
+ lineno++;
+
+ token = strtok_r(line, "\r\n", &saveptr1);
+ if (token == NULL)
+ continue;
+
+ /* Check inside the single line */
+ for (fld = CFG_COMMAND, cmd = CMD_INVALID,
+ line = token; ; line = NULL, fld++) {
+ token = strtok_r(line, " \t", &saveptr2);
+ if (token == NULL)
+ break;
+
+ /* Drop all text starting with '#' as comments */
+ if (token[0] == '#')
+ break;
+
+ /* parse all fields in a single line */
+ switch (fld) {
+ case CFG_COMMAND:
+ cmd = get_table_entry_id(imximage_cmds,
+ "imximage commands", token);
+ if (cmd < 0) {
+ fprintf(stderr,
+ "Error: %s[%d] - "
+ "Invalid command (%s)\n",
+ name, lineno, token);
+ exit(EXIT_FAILURE);
+ }
+ break;
+ case CFG_REG_SIZE:
+ switch (cmd) {
+ case CMD_BOOT_FROM:
+ /* Get flash header offset */
+ imxhdr->flash_offset =
+ get_table_entry_id(
+ imximage_bootops,
+ "imximage boot option",
+ token);
+ if (imxhdr->flash_offset == -1) {
+ fprintf(stderr,
+ "Error: %s[%d] -"
+ "Invalid boot device"
+ "(%s)\n",
+ name, lineno, token);
+ exit(EXIT_FAILURE);
+ }
+ break;
+ case CMD_DATA:
+ value = get_cfg_value(token,
+ name, lineno);
+
+ /* Byte, halfword, word */
+ if ((value != 1) &&
+ (value != 2) && (value != 4)) {
+ fprintf(stderr,
+ "Error: %s[%d] - "
+ "Invalid register size "
+ "(%d)\n",
+ name, lineno, value);
+ exit(EXIT_FAILURE);
+ }
+ dcd->addr_data[dcd_len].type = value;
+ break;
+ }
+
+ case CFG_REG_ADDRESS:
+ if (cmd == CMD_DATA)
+ dcd->addr_data[dcd_len].addr =
+ get_cfg_value(token,
+ name, lineno);
+ break;
+ case CFG_REG_VALUE:
+ if (cmd == CMD_DATA) {
+ dcd->addr_data[dcd_len].value =
+ get_cfg_value(token,
+ name, lineno);
+ dcd_len++;
+ }
+ break;
+ }
+ }
+
+ if (dcd_len > MAX_HW_CFG_SIZE) {
+ fprintf(stderr,
+ "Error: %s[%d] -"
+ "DCD table exceeds maximum size(%d)\n",
+ name, lineno, MAX_HW_CFG_SIZE);
+ }
+ }
+ dcd->preamble.barker = DCD_BARKER;
+ dcd->preamble.length = dcd_len * sizeof(dcd_type_addr_data_t);
+ fclose(fd);
+
+ return dcd->preamble.length;
+}
+
+static void imximage_set_header(void *ptr, struct stat *sbuf, int ifd,
+ struct mkimage_params *params)
+{
+ struct imx_header *hdr = (struct imx_header *)ptr;
+ flash_header_t *fhdr = &hdr->fhdr;
+ int dcd_len;
+ flash_cfg_parms_t *ext_header;
+ uint32_t base_offset;
+
+ /* Set default offset */
+ hdr->flash_offset = FLASH_OFFSET_STANDARD;
+
+ /* Set magic number */
+ fhdr->app_code_barker = APP_CODE_BARKER;
+
+ /* Parse dcd configuration file */
+ dcd_len = imximage_parse_cfg_file(hdr, params->imagename);
+
+ fhdr->app_dest_ptr = params->addr;
+ fhdr->app_dest_ptr = params->ep - hdr->flash_offset -
+ sizeof(struct imx_header);
+ fhdr->app_code_jump_vector = params->ep;
+
+ base_offset = fhdr->app_dest_ptr + hdr->flash_offset ;
+ fhdr->dcd_ptr_ptr = (uint32_t) ((uint32_t)&fhdr->dcd_ptr -
+ (uint32_t)&fhdr->app_code_jump_vector) + base_offset ;
+
+ fhdr->dcd_ptr = base_offset +
+ ((uint32_t)&hdr->dcd_table -
+ (uint32_t)&hdr->fhdr);
+
+ /* The external flash header must be at the end of the DCD table */
+ ext_header = (flash_cfg_parms_t *) ((uint32_t)&hdr->dcd_table +
+ dcd_len +
+ sizeof(dcd_preamble_t));
+ ext_header->length = sbuf->st_size +
+ hdr->flash_offset +
+ sizeof(struct imx_header);
+
+ /* Security feature are not supported */
+ fhdr->app_code_csf = 0;
+ fhdr->super_root_key = NULL;
+
+}
+
+int imximage_check_params(struct mkimage_params *params)
+{
+ if (!params)
+ return CFG_INVALID;
+ if (!strlen(params->imagename)) {
+ fprintf(stderr, "Error: %s - Configuration file not specified, "
+ "it is needed for imximage generation\n",
+ params->cmdname);
+ return CFG_INVALID;
+ }
+ /*
+ * Check parameters:
+ * XIP is not allowed and verify that incompatible
+ * parameters are not sent at the same time
+ * For example, if list is required a data image must not be provided
+ */
+ return (params->dflag && (params->fflag || params->lflag)) ||
+ (params->fflag && (params->dflag || params->lflag)) ||
+ (params->lflag && (params->dflag || params->fflag)) ||
+ (params->xflag) || !(strlen(params->imagename));
+}
+
+/*
+ * imximage parameters
+ */
+static struct image_type_params imximage_params = {
+ .name = "Freescale i.MX 51 Boot Image support",
+ .header_size = sizeof(struct imx_header),
+ .hdr = (void *)&imximage_header,
+ .check_image_type = imximage_check_image_types,
+ .verify_header = imximage_verify_header,
+ .print_header = imximage_print_header,
+ .set_header = imximage_set_header,
+ .check_params = imximage_check_params,
+};
+
+void init_imx_image_type(void)
+{
+ mkimage_register(&imximage_params);
+}
diff --git a/tools/imximage.h b/tools/imximage.h
new file mode 100644
index 0000000..c579f51
--- /dev/null
+++ b/tools/imximage.h
@@ -0,0 +1,105 @@
+/*
+ * (C) Copyright 2009
+ * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _IMXIMAGE_H_
+#define _IMXIMAGE_H_
+
+#define MAX_HW_CFG_SIZE 60 /* Max number of registers imx can set */
+#define MAX_EXP_SIZE 4
+#define APP_CODE_BARKER 0xB1
+#define DCD_BARKER 0xB17219E9
+#define HEADER_OFFSET 0x400
+
+
+#define CMD_DATA_STR "DATA"
+#define FLASH_OFFSET_STANDARD 0x400
+#define FLASH_OFFSET_NAND FLASH_OFFSET_STANDARD
+#define FLASH_OFFSET_SD FLASH_OFFSET_STANDARD
+#define FLASH_OFFSET_SPI FLASH_OFFSET_STANDARD
+#define FLASH_OFFSET_ONENAND 0x100
+
+enum imximage_cmd {
+ CMD_INVALID,
+ CMD_BOOT_FROM,
+ CMD_DATA
+};
+
+enum imximage_fld_types {
+ CFG_INVALID = -1,
+ CFG_COMMAND,
+ CFG_REG_SIZE,
+ CFG_REG_ADDRESS,
+ CFG_REG_VALUE
+};
+
+typedef struct {
+ uint8_t rsa_exponent[MAX_EXP_SIZE]; /* RSA public exponent */
+ uint8_t *rsa_modulus; /* RSA modulus pointer */
+ uint16_t exponent_size; /* Exponent size (bytes) */
+ uint16_t modulus_size; /* Modulus size (bytes) */
+ uint8_t init_flag; /* key initialized */
+} hab_rsa_public_key;
+
+typedef struct {
+ uint32_t type; /* Type of pointer (byte, halfword, word, wait/read) */
+ uint32_t addr; /* Address to write to */
+ uint32_t value; /* Data to write */
+} dcd_type_addr_data_t;
+
+typedef struct {
+ uint32_t barker; /* Barker for sanity check */
+ uint32_t length; /* Device configuration length (without preamble) */
+} dcd_preamble_t;
+
+typedef struct {
+ dcd_preamble_t preamble;
+ dcd_type_addr_data_t addr_data[MAX_HW_CFG_SIZE];
+} dcd_t;
+
+typedef struct {
+ uint32_t app_code_jump_vector;
+ uint32_t app_code_barker;
+ uint32_t app_code_csf;
+ uint32_t dcd_ptr_ptr;
+ hab_rsa_public_key *super_root_key;
+ uint32_t dcd_ptr;
+ uint32_t app_dest_ptr;
+} flash_header_t;
+
+typedef struct {
+ uint32_t length; /* Length of data to be read from flash */
+} flash_cfg_parms_t;
+
+struct imx_header {
+ flash_header_t fhdr;
+ dcd_t dcd_table;
+ flash_cfg_parms_t ext_header;
+ uint32_t flash_offset;
+};
+
+struct reg_config {
+ uint32_t raddr;
+ uint32_t rdata;
+};
+
+#endif /* _IMXIMAGE_H_ */
diff --git a/tools/mkimage.c b/tools/mkimage.c
index 1bed933..cf4b754 100644
--- a/tools/mkimage.c
+++ b/tools/mkimage.c
@@ -150,6 +150,8 @@ main (int argc, char **argv)
/* Init Kirkwood Boot image generation/list support */
init_kwb_image_type ();
+ /* Init Freescale imx Boot image generation/list support */
+ init_imx_image_type ();
/* Init FIT image generation/list support */
init_fit_image_type ();
/* Init Default image generation/list support */
diff --git a/tools/mkimage.h b/tools/mkimage.h
index ec67336..9033a7d 100644
--- a/tools/mkimage.h
+++ b/tools/mkimage.h
@@ -140,6 +140,7 @@ void mkimage_register (struct image_type_params *tparams);
* Supported image types init functions
*/
void init_kwb_image_type (void);
+void init_imx_image_type (void);
void init_default_image_type (void);
void init_fit_image_type (void);