summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--MAINTAINERS5
-rwxr-xr-xMAKEALL2
-rw-r--r--Makefile6
-rw-r--r--board/atum8548/Makefile56
-rw-r--r--board/atum8548/atum8548.c420
-rw-r--r--board/atum8548/config.mk33
-rw-r--r--board/atum8548/init.S235
-rw-r--r--board/atum8548/u-boot.lds147
-rw-r--r--board/freescale/mpc8540ads/init.S145
-rw-r--r--board/freescale/mpc8541cds/init.S124
-rw-r--r--board/freescale/mpc8544ds/init.S117
-rw-r--r--board/freescale/mpc8548cds/init.S109
-rw-r--r--board/freescale/mpc8555cds/init.S124
-rw-r--r--board/freescale/mpc8560ads/init.S144
-rw-r--r--board/freescale/mpc8568mds/bcsr.c21
-rw-r--r--board/freescale/mpc8568mds/bcsr.h9
-rw-r--r--board/freescale/mpc8568mds/init.S104
-rw-r--r--board/freescale/mpc8568mds/mpc8568mds.c10
-rw-r--r--board/mpc8540eval/init.S132
-rw-r--r--board/pm854/init.S124
-rw-r--r--board/pm856/init.S124
-rw-r--r--board/sbc8548/Makefile55
-rw-r--r--board/sbc8548/config.mk32
-rw-r--r--board/sbc8548/init.S241
-rw-r--r--board/sbc8548/sbc8548.c569
-rw-r--r--board/sbc8548/u-boot.lds149
-rw-r--r--board/sbc8560/init.S94
-rw-r--r--board/stxgp3/init.S144
-rw-r--r--board/stxssa/init.S110
-rw-r--r--board/tqm85xx/init.S124
-rw-r--r--common/fdt_support.c48
-rw-r--r--cpu/mpc85xx/fdt.c5
-rw-r--r--cpu/mpc85xx/spd_sdram.c23
-rw-r--r--cpu/mpc85xx/start.S9
-rw-r--r--doc/README.atum854829
-rw-r--r--doc/README.sbc854827
-rw-r--r--drivers/qe/qe.c219
-rw-r--r--drivers/qe/qe.h56
-rw-r--r--include/asm-ppc/cache.h10
-rw-r--r--include/asm-ppc/immap_qe.h33
-rw-r--r--include/asm-ppc/mmu.h113
-rw-r--r--include/asm-ppc/processor.h4
-rw-r--r--include/configs/ATUM8548.h458
-rw-r--r--include/configs/MPC8540ADS.h7
-rw-r--r--include/configs/MPC8540EVAL.h7
-rw-r--r--include/configs/MPC8541CDS.h7
-rw-r--r--include/configs/MPC8544DS.h7
-rw-r--r--include/configs/MPC8548CDS.h7
-rw-r--r--include/configs/MPC8555CDS.h7
-rw-r--r--include/configs/MPC8560ADS.h7
-rw-r--r--include/configs/MPC8568MDS.h7
-rw-r--r--include/configs/MPC8641HPCN.h7
-rw-r--r--include/configs/PM854.h7
-rw-r--r--include/configs/PM856.h7
-rw-r--r--include/configs/SBC8540.h7
-rw-r--r--include/configs/TQM85xx.h7
-rw-r--r--include/configs/sbc8548.h569
-rw-r--r--include/configs/sbc8560.h7
-rw-r--r--include/configs/stxgp3.h7
-rw-r--r--include/configs/stxssa.h7
-rw-r--r--include/e500.h94
-rw-r--r--include/fdt_support.h1
62 files changed, 4309 insertions, 1210 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index 43b3b79..2ef2f5c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -190,6 +190,7 @@ Howard Gray <mvsensor@matrix-vision.de>
Joe Hamman <joe.hamman@embeddedspecialties.com>
+ sbc8548 MPC8548
sbc8641d MPC8641D
Klaus Heydeck <heydeck@kieback-peter.de>
@@ -221,6 +222,10 @@ Thomas Lange <thomas@corelatus.se>
GTH MPC860
+Robert Lazarski <robertlazarski@gmail.com>
+
+ ATUM8548 MPC8548
+
The LEOX team <team@leox.org>
ELPT860 MPC860T
diff --git a/MAKEALL b/MAKEALL
index 145b513..ebc5a22 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -324,6 +324,7 @@ LIST_83xx=" \
#########################################################################
LIST_85xx=" \
+ ATUM8548 \
MPC8540ADS \
MPC8540EVAL \
MPC8541CDS \
@@ -335,6 +336,7 @@ LIST_85xx=" \
PM854 \
PM856 \
sbc8540 \
+ sbc8548 \
sbc8560 \
stxgp3 \
stxssa \
diff --git a/Makefile b/Makefile
index 0e94875..1983ca0 100644
--- a/Makefile
+++ b/Makefile
@@ -1950,6 +1950,9 @@ TQM834x_config: unconfig
## MPC85xx Systems
#########################################################################
+ATUM8548_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc mpc85xx atum8548
+
MPC8540ADS_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8540ads freescale
@@ -2032,6 +2035,9 @@ sbc8540_66_config: unconfig
fi
@$(MKCONFIG) -a SBC8540 ppc mpc85xx sbc8560
+sbc8548_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc mpc85xx sbc8548
+
sbc8560_config \
sbc8560_33_config \
sbc8560_66_config: unconfig
diff --git a/board/atum8548/Makefile b/board/atum8548/Makefile
new file mode 100644
index 0000000..e198062
--- /dev/null
+++ b/board/atum8548/Makefile
@@ -0,0 +1,56 @@
+#
+# Copyright 2004 Freescale Semiconductor.
+# (C) Copyright 2001-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := $(BOARD).o
+
+SOBJS := init.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+ rm -f $(OBJS) $(SOBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/atum8548/atum8548.c b/board/atum8548/atum8548.c
new file mode 100644
index 0000000..4d7dc77
--- /dev/null
+++ b/board/atum8548/atum8548.c
@@ -0,0 +1,420 @@
+/*
+ * Copyright 2007
+ * Robert Lazarski, Instituto Atlantico, robertlazarski@gmail.com
+ *
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <pci.h>
+#include <asm/processor.h>
+#include <asm/immap_85xx.h>
+#include <asm/immap_fsl_pci.h>
+#include <asm/io.h>
+#include <spd.h>
+#include <miiphy.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+extern void ddr_enable_ecc(unsigned int dram_size);
+#endif
+
+extern long int spd_sdram(void);
+long int fixed_sdram(void);
+
+int board_early_init_f (void)
+{
+ return 0;
+}
+
+int checkboard (void)
+{
+ volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+ volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
+ volatile ccsr_local_ecm_t *ecm = (void *)(CFG_MPC85xx_ECM_ADDR);
+
+ if ((uint)&gur->porpllsr != 0xe00e0000) {
+ printf("immap size error %x\n",&gur->porpllsr);
+ }
+ printf ("Board: ATUM8548\n");
+
+ lbc->ltesr = 0xffffffff; /* Clear LBC error interrupts */
+ lbc->lteir = 0xffffffff; /* Enable LBC error interrupts */
+ ecm->eedr = 0xffffffff; /* Clear ecm errors */
+ ecm->eeer = 0xffffffff; /* Enable ecm errors */
+
+ return 0;
+}
+
+#if !defined(CONFIG_SPD_EEPROM)
+/*************************************************************************
+ * fixed sdram init -- doesn't use serial presence detect.
+ ************************************************************************/
+long int fixed_sdram (void)
+{
+ volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR);
+
+ ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
+ ddr->cs0_config = CFG_DDR_CS0_CONFIG;
+ ddr->timing_cfg_0 = CFG_DDR_TIMING_0;
+ ddr->timing_cfg_1 = CFG_DDR_TIMING_1;
+ ddr->timing_cfg_2 = CFG_DDR_TIMING_2;
+ ddr->sdram_mode = CFG_DDR_MODE;
+ ddr->sdram_interval = CFG_DDR_INTERVAL;
+ #if defined (CONFIG_DDR_ECC)
+ ddr->err_disable = 0x0000000D;
+ ddr->err_sbe = 0x00ff0000;
+ #endif
+ asm("sync;isync;msync");
+ udelay(500);
+ #if defined (CONFIG_DDR_ECC)
+ /* Enable ECC checking */
+ ddr->sdram_cfg = (CFG_DDR_CONTROL | 0x20000000);
+ #else
+ ddr->sdram_cfg = CFG_DDR_CONTROL;
+ #endif
+ asm("sync; isync; msync");
+ udelay(500);
+ return CFG_SDRAM_SIZE * 1024 * 1024;
+}
+#endif /* !defined(CONFIG_SPD_EEPROM) */
+
+long int
+initdram(int board_type)
+{
+ long dram_size = 0;
+
+ puts("Initializing\n");
+
+#if defined(CONFIG_SPD_EEPROM)
+ puts("spd_sdram\n");
+ dram_size = spd_sdram ();
+#else
+ puts("fixed_sdram\n");
+ dram_size = fixed_sdram ();
+#endif
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+ /*
+ * Initialize and enable DDR ECC.
+ */
+ ddr_enable_ecc(dram_size);
+#endif
+ puts(" DDR: ");
+ return dram_size;
+}
+
+#if defined(CFG_DRAM_TEST)
+int
+testdram(void)
+{
+ uint *pstart = (uint *) CFG_MEMTEST_START;
+ uint *pend = (uint *) CFG_MEMTEST_END;
+ uint *p;
+
+ printf("Testing DRAM from 0x%08x to 0x%08x\n",
+ CFG_MEMTEST_START,
+ CFG_MEMTEST_END);
+
+ printf("DRAM test phase 1:\n");
+ for (p = pstart; p < pend; p++) {
+ printf ("DRAM test attempting to write 0xaaaaaaaa at: %08x\n", (uint) p);
+ *p = 0xaaaaaaaa;
+ }
+
+ for (p = pstart; p < pend; p++) {
+ if (*p != 0xaaaaaaaa) {
+ printf ("DRAM test fails at: %08x\n", (uint) p);
+ return 1;
+ }
+ }
+
+ printf("DRAM test phase 2:\n");
+ for (p = pstart; p < pend; p++)
+ *p = 0x55555555;
+
+ for (p = pstart; p < pend; p++) {
+ if (*p != 0x55555555) {
+ printf ("DRAM test fails at: %08x\n", (uint) p);
+ return 1;
+ }
+ }
+
+ printf("DRAM test passed.\n");
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_PCI1
+static struct pci_controller pci1_hose;
+#endif
+
+#ifdef CONFIG_PCI2
+static struct pci_controller pci2_hose;
+#endif
+
+#ifdef CONFIG_PCIE1
+static struct pci_controller pcie1_hose;
+#endif
+
+int first_free_busno=0;
+
+void
+pci_init_board(void)
+{
+ volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+
+ uint devdisr = gur->devdisr;
+ uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
+ uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
+
+ debug (" pci_init_board: devdisr=%x, io_sel=%x, host_agent=%x\n",
+ devdisr, io_sel, host_agent);
+
+ /* explicitly set 'Clock out select register' to echo SYSCLK input to our CPLD */
+ gur->clkocr |= MPC85xx_ATUM_CLKOCR;
+
+ if (io_sel & 1) {
+ if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS))
+ printf (" eTSEC1 is in sgmii mode.\n");
+ if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS))
+ printf (" eTSEC2 is in sgmii mode.\n");
+ if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS))
+ printf (" eTSEC3 is in sgmii mode.\n");
+ if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII4_DIS))
+ printf (" eTSEC4 is in sgmii mode.\n");
+ }
+
+#ifdef CONFIG_PCIE1
+ {
+ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE1_ADDR;
+ extern void fsl_pci_init(struct pci_controller *hose);
+ struct pci_controller *hose = &pcie1_hose;
+ int pcie_ep = (host_agent == 5);
+ int pcie_configured = io_sel & 6;
+
+ if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
+ printf ("\n PCIE1 connected to slot as %s (base address %x)",
+ pcie_ep ? "End Point" : "Root Complex",
+ (uint)pci);
+ if (pci->pme_msg_det) {
+ pci->pme_msg_det = 0xffffffff;
+ debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det);
+ }
+ printf ("\n");
+
+ /* inbound */
+ pci_set_region(hose->regions + 0,
+ CFG_PCI_MEMORY_BUS,
+ CFG_PCI_MEMORY_PHYS,
+ CFG_PCI_MEMORY_SIZE,
+ PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+ /* outbound memory */
+ pci_set_region(hose->regions + 1,
+ CFG_PCIE1_MEM_BASE,
+ CFG_PCIE1_MEM_PHYS,
+ CFG_PCIE1_MEM_SIZE,
+ PCI_REGION_MEM);
+
+ /* outbound io */
+ pci_set_region(hose->regions + 2,
+ CFG_PCIE1_IO_BASE,
+ CFG_PCIE1_IO_PHYS,
+ CFG_PCIE1_IO_SIZE,
+ PCI_REGION_IO);
+
+ hose->region_count = 3;
+#ifdef CFG_PCIE1_MEM_BASE2
+ /* outbound memory */
+ pci_set_region(hose->regions + 3,
+ CFG_PCIE1_MEM_BASE2,
+ CFG_PCIE1_MEM_PHYS2,
+ CFG_PCIE1_MEM_SIZE2,
+ PCI_REGION_MEM);
+ hose->region_count++;
+#endif
+ hose->first_busno=first_free_busno;
+
+ pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
+
+ fsl_pci_init(hose);
+
+ first_free_busno=hose->last_busno+1;
+ printf(" PCIE1 on bus %02x - %02x\n",
+ hose->first_busno,hose->last_busno);
+
+ } else {
+ printf (" PCIE1: disabled\n");
+ }
+
+ }
+#else
+ gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */
+#endif
+
+#ifdef CONFIG_PCI1
+{
+ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR;
+ extern void fsl_pci_init(struct pci_controller *hose);
+ struct pci_controller *hose = &pci1_hose;
+
+ uint pci_agent = (host_agent == 6);
+ uint pci_speed = 33333000; /*get_clock_freq (); PCI PSPEED in [4:5] */
+ uint pci_32 = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32; /* PORDEVSR[15] */
+ uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB; /* PORDEVSR[14] */
+ uint pci_clk_sel = gur->porpllsr & MPC85xx_PORDEVSR_PCI1_SPD; /* PORPLLSR[16] */
+
+ if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
+ printf ("\n PCI1: %d bit, %s MHz, %s, %s, %s (base address %x)\n",
+ (pci_32) ? 32 : 64,
+ (pci_speed == 33333000) ? "33" :
+ (pci_speed == 66666000) ? "66" : "unknown",
+ pci_clk_sel ? "sync" : "async",
+ pci_agent ? "agent" : "host",
+ pci_arb ? "arbiter" : "external-arbiter",
+ (uint)pci
+ );
+
+ /* inbound */
+ pci_set_region(hose->regions + 0,
+ CFG_PCI_MEMORY_BUS,
+ CFG_PCI_MEMORY_PHYS,
+ CFG_PCI_MEMORY_SIZE,
+ PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+ /* outbound memory */
+ pci_set_region(hose->regions + 1,
+ CFG_PCI1_MEM_BASE,
+ CFG_PCI1_MEM_PHYS,
+ CFG_PCI1_MEM_SIZE,
+ PCI_REGION_MEM);
+
+ /* outbound io */
+ pci_set_region(hose->regions + 2,
+ CFG_PCI1_IO_BASE,
+ CFG_PCI1_IO_PHYS,
+ CFG_PCI1_IO_SIZE,
+ PCI_REGION_IO);
+ hose->region_count = 3;
+ hose->first_busno=first_free_busno;
+ pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
+
+ fsl_pci_init(hose);
+ first_free_busno=hose->last_busno+1;
+ printf ("PCI1 on bus %02x - %02x\n",
+ hose->first_busno,hose->last_busno);
+ } else {
+ printf (" PCI1: disabled\n");
+ }
+}
+#else
+ gur->devdisr |= MPC85xx_DEVDISR_PCI1; /* disable */
+#endif
+
+#ifdef CONFIG_PCI2
+{
+ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI2_ADDR;
+ extern void fsl_pci_init(struct pci_controller *hose);
+ struct pci_controller *hose = &pci2_hose;
+
+ if (!(devdisr & MPC85xx_DEVDISR_PCI2)) {
+ pci_set_region(hose->regions + 0,
+ CFG_PCI_MEMORY_BUS,
+ CFG_PCI_MEMORY_PHYS,
+ CFG_PCI_MEMORY_SIZE,
+ PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+ pci_set_region(hose->regions + 1,
+ CFG_PCI2_MEM_BASE,
+ CFG_PCI2_MEM_PHYS,
+ CFG_PCI2_MEM_SIZE,
+ PCI_REGION_MEM);
+
+ pci_set_region(hose->regions + 2,
+ CFG_PCI2_IO_BASE,
+ CFG_PCI2_IO_PHYS,
+ CFG_PCI2_IO_SIZE,
+ PCI_REGION_IO);
+ hose->region_count = 3;
+ hose->first_busno=first_free_busno;
+ pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
+
+ fsl_pci_init(hose);
+ first_free_busno=hose->last_busno+1;
+ printf ("PCI2 on bus %02x - %02x\n",
+ hose->first_busno,hose->last_busno);
+ } else {
+ printf (" PCI2: disabled\n");
+ }
+}
+#else
+ gur->devdisr |= MPC85xx_DEVDISR_PCI2;
+#endif
+}
+
+
+int last_stage_init(void)
+{
+ int ic = icache_status ();
+ printf ("icache_status: %d\n", ic);
+ return 0;
+}
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+
+void
+ft_board_setup(void *blob, bd_t *bd)
+{
+ int node, tmp[2];
+ const char *path;
+
+ ft_cpu_setup(blob, bd);
+
+ node = fdt_path_offset(blob, "/aliases");
+ tmp[0] = 0;
+ if (node >= 0) {
+#ifdef CONFIG_PCI1
+ path = fdt_getprop(blob, node, "pci0", NULL);
+ if (path) {
+ tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno;
+ do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+ }
+#endif
+#ifdef CONFIG_PCI2
+ path = fdt_getprop(blob, node, "pci1", NULL);
+ if (path) {
+ tmp[1] = pci2_hose.last_busno - pci2_hose.first_busno;
+ do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+ }
+#endif
+#ifdef CONFIG_PCIE1
+ path = fdt_getprop(blob, node, "pci2", NULL);
+ if (path) {
+ tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno;
+ do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+ }
+#endif
+ }
+}
+#endif
diff --git a/board/atum8548/config.mk b/board/atum8548/config.mk
new file mode 100644
index 0000000..9065817
--- /dev/null
+++ b/board/atum8548/config.mk
@@ -0,0 +1,33 @@
+#
+# Copyright 2004, 2007 Freescale Semiconductor.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# atum8548 board
+# TEXT_BASE = 0xfff80000
+# TEXT_BASE = 0xfffff000
+ifndef TEXT_BASE
+TEXT_BASE = 0xfff80000
+endif
+
+PLATFORM_CPPFLAGS += -DCONFIG_E500=1
+PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1
+PLATFORM_CPPFLAGS += -DCONFIG_MPC8548=1
diff --git a/board/atum8548/init.S b/board/atum8548/init.S
new file mode 100644
index 0000000..a410e2e
--- /dev/null
+++ b/board/atum8548/init.S
@@ -0,0 +1,235 @@
+/*
+ * Copyright 2007
+ * Robert Lazarski, Instituto Atlantico, robertlazarski@gmail.com
+ * Copyright 2004, 2007 Freescale Semiconductor.
+ * Copyright 2002,2003, Motorola Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+#include <asm/cache.h>
+#include <asm/mmu.h>
+#include <config.h>
+#include <mpc85xx.h>
+
+#define LAWAR_TRGT_PCI1 0x00000000
+#define LAWAR_TRGT_PCI2 0x00100000
+#define LAWAR_TRGT_PCIE 0x00200000
+#define LAWAR_TRGT_DDR 0x00f00000
+
+/*
+ * TLB0 and TLB1 Entries
+ *
+ * Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR.
+ * However, CCSRBAR is then relocated to CFG_CCSRBAR right after
+ * these TLB entries are established.
+ *
+ * The TLB entries for DDR are dynamically setup in spd_sdram()
+ * and use TLB1 Entries 8 through 15 as needed according to the
+ * size of DDR memory.
+ *
+ * MAS0: tlbsel, esel, nv
+ * MAS1: valid, iprot, tid, ts, tsize
+ * MAS2: epn, x0, x1, w, i, m, g, e
+ * MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
+ */
+
+#define entry_start \
+ mflr r1 ; \
+ bl 0f ;
+
+#define entry_end \
+0: mflr r0 ; \
+ mtlr r1 ; \
+ blr ;
+
+
+ .section .bootpg, "ax"
+ .globl tlb1_entry
+tlb1_entry:
+ entry_start
+
+ /*
+ * Number of TLB0 and TLB1 entries in the following table
+ */
+ .long (2f-1f)/16
+
+1:
+#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
+ /*
+ * TLB0 4K Non-cacheable, guarded
+ * 0xff700000 4K Initial CCSRBAR mapping
+ *
+ * This ends up at a TLB0 Index==0 entry, and must not collide
+ * with other TLB0 Entries.
+ */
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_CCSRBAR_DEFAULT, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_CCSRBAR_DEFAULT, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+#else
+#error("Update the number of table entries in tlb1_entry")
+#endif
+
+ /*
+ * TLB0 16K Cacheable, guarded
+ * Temporary Global data for initialization
+ *
+ * Use four 4K TLB0 entries. These entries must be cacheable
+ * as they provide the bootstrap memory before the memory
+ * controler and real memory have been configured.
+ *
+ * These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
+ * and must not collide with other TLB0 entries.
+ */
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, MAS2_G)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 4 * 1024, MAS2_G)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 4 * 1024, 0,
+ (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 8 * 1024, MAS2_G)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 8 * 1024, 0,
+ (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 12 * 1024, MAS2_G)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 12 * 1024, 0,
+ (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ /* TLB 1 Initializations */
+ /*
+ * TLB 0, 1: 128M Non-cacheable, guarded
+ * 0xf8000000 128M FLASH
+ * Out of reset this entry is only 4K.
+ */
+ .long FSL_BOOKE_MAS0(1, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long FSL_BOOKE_MAS2(CFG_FLASH_BASE + 0x4000000, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_FLASH_BASE + 0x4000000, 0,
+ (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ .long FSL_BOOKE_MAS0(1, 1, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long FSL_BOOKE_MAS2(CFG_FLASH_BASE, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_FLASH_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ /*
+ * TLB 2: 1G Non-cacheable, guarded
+ * 0x80000000 1G PCI1/PCIE 8,9,a,b
+ */
+ .long FSL_BOOKE_MAS0(1, 2, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1G)
+ .long FSL_BOOKE_MAS2(CFG_PCI_PHYS, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_PCI_PHYS, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ /*
+ * TLB 3, 4: 512M Non-cacheable, guarded
+ * 0xc0000000 1G PCI2
+ */
+ .long FSL_BOOKE_MAS0(1, 3, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_PCI2_MEM_PHYS, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_PCI2_MEM_PHYS, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ .long FSL_BOOKE_MAS0(1, 4, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_PCI2_MEM_PHYS + 0x10000000, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_PCI2_MEM_PHYS + 0x10000000, 0,
+ (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ /*
+ * TLB 5: 64M Non-cacheable, guarded
+ * 0xe000_0000 1M CCSRBAR
+ * 0xe200_0000 1M PCI1 IO
+ * 0xe210_0000 1M PCI2 IO
+ * 0xe300_0000 1M PCIe IO
+ */
+ .long FSL_BOOKE_MAS0(1, 5, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long FSL_BOOKE_MAS2(CFG_CCSRBAR, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_CCSRBAR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+
+2:
+ entry_end
+
+/*
+ * LAW(Local Access Window) configuration:
+ *
+ * 0x0000_0000 0x7fff_ffff DDR 2G
+ * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
+ * 0xa000_0000 0xbfff_ffff PCIe MEM 512M
+ * 0xc000_0000 0xdfff_ffff PCI2 MEM 512M
+ * 0xe000_0000 0xe000_ffff CCSR 1M
+ * 0xe200_0000 0xe10f_ffff PCI1 IO 1M
+ * 0xe280_0000 0xe20f_ffff PCI2 IO 1M
+ * 0xe300_0000 0xe30f_ffff PCIe IO 1M
+ * 0xf800_0000 0xffff_ffff FLASH (boot bank) 128M
+ *
+ * Notes:
+ * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
+ * If flash is 8M at default position (last 8M), no LAW needed.
+ *
+ * LAW 0 is reserved for boot mapping
+ */
+
+ .section .bootpg, "ax"
+ .globl law_entry
+law_entry:
+ entry_start
+
+ .long (4f-3f)/8
+3:
+ .long 0
+ .long (LAWAR_TRGT_DDR | (LAWAR_SIZE & LAWAR_SIZE_1G)) & ~LAWAR_EN
+
+ .long (CFG_PCI1_MEM_PHYS>>12) & 0xfffff
+ .long LAWAR_EN | LAWAR_TRGT_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M)
+
+ .long (CFG_PCI1_IO_PHYS>>12) & 0xfffff
+ .long LAWAR_EN | LAWAR_TRGT_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_1M)
+
+ .long (CFG_PCI2_MEM_PHYS>>12) & 0xfffff
+ .long LAWAR_EN | LAWAR_TRGT_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_512M)
+
+ .long (CFG_PCI2_IO_PHYS>>12) & 0xfffff
+ .long LAWAR_EN | LAWAR_TRGT_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_1M)
+
+ .long (CFG_PCIE1_MEM_PHYS>>12) & 0xfffff
+ .long LAWAR_EN | LAWAR_TRGT_PCIE | (LAWAR_SIZE & LAWAR_SIZE_512M)
+
+ .long (CFG_PCIE1_IO_PHYS>>12) & 0xfffff
+ .long LAWAR_EN | LAWAR_TRGT_PCIE | (LAWAR_SIZE & LAWAR_SIZE_1M)
+
+ /* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
+ .long (CFG_LBC_CACHE_BASE>>12) & 0xfffff
+ .long LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M)
+
+4:
+ entry_end
diff --git a/board/atum8548/u-boot.lds b/board/atum8548/u-boot.lds
new file mode 100644
index 0000000..5c0e8a2
--- /dev/null
+++ b/board/atum8548/u-boot.lds
@@ -0,0 +1,147 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ .resetvec 0xFFFFFFFC :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ .bootpg 0xFFFFF000 :
+ {
+ cpu/mpc85xx/start.o (.bootpg)
+ board/atum8548/init.o (.bootpg)
+ } = 0xffff
+
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/mpc85xx/start.o (.text)
+ board/atum8548/init.o (.text)
+ cpu/mpc85xx/traps.o (.text)
+ cpu/mpc85xx/interrupts.o (.text)
+ cpu/mpc85xx/cpu_init.o (.text)
+ cpu/mpc85xx/cpu.o (.text)
+ cpu/mpc85xx/speed.o (.text)
+ lib_generic/crc32.o (.text)
+ lib_ppc/extable.o (.text)
+ lib_generic/zlib.o (.text)
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ *(.eh_frame)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/freescale/mpc8540ads/init.S b/board/freescale/mpc8540ads/init.S
index 544fde9..74d71c6 100644
--- a/board/freescale/mpc8540ads/init.S
+++ b/board/freescale/mpc8540ads/init.S
@@ -43,7 +43,7 @@
*
* MAS0: tlbsel, esel, nv
* MAS1: valid, iprot, tid, ts, tsize
- * MAS2: epn, sharen, x0, x1, w, i, m, g, e
+ * MAS2: epn, x0, x1, w, i, m, g, e
* MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
*/
@@ -75,10 +75,10 @@ tlb1_entry:
* This ends up at a TLB0 Index==0 entry, and must not collide
* with other TLB0 Entries.
*/
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_CCSRBAR_DEFAULT, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_CCSRBAR_DEFAULT, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
#else
#error("Update the number of table entries in tlb1_entry")
#endif
@@ -94,112 +94,99 @@ tlb1_entry:
* These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
* and must not collide with other TLB0 entries.
*/
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR),
- 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR),
- 0,0,0,0,0,1,0,1,0,1)
-
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 4 * 1024),
- 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 4 * 1024),
- 0,0,0,0,0,1,0,1,0,1)
-
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 8 * 1024),
- 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 8 * 1024),
- 0,0,0,0,0,1,0,1,0,1)
-
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 12 * 1024),
- 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 12 * 1024),
- 0,0,0,0,0,1,0,1,0,1)
-
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, 0)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 4*1024, 0)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 4*1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 8*1024, 0)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 8*1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 12*1024, 0)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 12*1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 0: 16M Non-cacheable, guarded
* 0xff000000 16M FLASH
* Out of reset this entry is only 4K.
*/
- .long TLB1_MAS0(1, 0, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_FLASH_BASE), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_FLASH_BASE), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)
+ .long FSL_BOOKE_MAS2(CFG_FLASH_BASE, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_FLASH_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 1: 256M Non-cacheable, guarded
* 0x80000000 256M PCI1 MEM First half
*/
- .long TLB1_MAS0(1, 1, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 1, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 2: 256M Non-cacheable, guarded
* 0x90000000 256M PCI1 MEM Second half
*/
- .long TLB1_MAS0(1, 2, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE + 0x10000000),
- 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE + 0x10000000),
- 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 2, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 3: 256M Non-cacheable, guarded
* 0xc0000000 256M Rapid IO MEM First half
*/
- .long TLB1_MAS0(1, 3, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_RIO_MEM_BASE), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_RIO_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 3, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_RIO_MEM_BASE, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_RIO_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 4: 256M Non-cacheable, guarded
* 0xd0000000 256M Rapid IO MEM Second half
*/
- .long TLB1_MAS0(1, 4, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_RIO_MEM_BASE + 0x10000000),
- 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_RIO_MEM_BASE + 0x10000000),
- 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 4, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_RIO_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_RIO_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 5: 64M Non-cacheable, guarded
* 0xe000_0000 1M CCSRBAR
* 0xe200_0000 16M PCI1 IO
*/
- .long TLB1_MAS0(1, 5, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 5, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long FSL_BOOKE_MAS2(CFG_CCSRBAR, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_CCSRBAR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 6: 64M Cacheable, non-guarded
* 0xf000_0000 64M LBC SDRAM
*/
- .long TLB1_MAS0(1, 6, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 6, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long FSL_BOOKE_MAS2(CFG_LBC_SDRAM_BASE, 0)
+ .long FSL_BOOKE_MAS3(CFG_LBC_SDRAM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 7: 16K Non-cacheable, guarded
* 0xf8000000 16K BCSR registers
*/
- .long TLB1_MAS0(1, 7, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16K)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_BCSR), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_BCSR), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 7, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16K)
+ .long FSL_BOOKE_MAS2(CFG_BCSR, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_BCSR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
#if !defined(CONFIG_SPD_EEPROM)
/*
@@ -211,17 +198,15 @@ tlb1_entry:
* Likely it needs to be increased by two for these entries.
*/
#error("Update the number of table entries in tlb1_entry")
- .long TLB1_MAS0(1, 8, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_DDR_SDRAM_BASE), 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_DDR_SDRAM_BASE), 0,0,0,0,0,1,0,1,0,1)
-
- .long TLB1_MAS0(1, 9, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_DDR_SDRAM_BASE + 0x4000000),
- 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_DDR_SDRAM_BASE + 0x4000000),
- 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 8, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long FSL_BOOKE_MAS2(CFG_DDR_SDRAM_BASE, 0)
+ .long FSL_BOOKE_MAS3(CFG_DDR_SDRAM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ .long FSL_BOOKE_MAS0(1, 9, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long FSL_BOOKE_MAS2(CFG_DDR_SDRAM_BASE + 0x4000000, 0)
+ .long FSL_BOOKE_MAS3(CFG_DDR_SDRAM_BASE + 0x4000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
#endif
entry_end
diff --git a/board/freescale/mpc8541cds/init.S b/board/freescale/mpc8541cds/init.S
index 978bda5..8c8c087 100644
--- a/board/freescale/mpc8541cds/init.S
+++ b/board/freescale/mpc8541cds/init.S
@@ -42,7 +42,7 @@
*
* MAS0: tlbsel, esel, nv
* MAS1: valid, iprot, tid, ts, tsize
- * MAS2: epn, sharen, x0, x1, w, i, m, g, e
+ * MAS2: epn, x0, x1, w, i, m, g, e
* MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
*/
@@ -74,10 +74,10 @@ tlb1_entry:
* This ends up at a TLB0 Index==0 entry, and must not collide
* with other TLB0 Entries.
*/
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_CCSRBAR_DEFAULT, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_CCSRBAR_DEFAULT, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
#else
#error("Update the number of table entries in tlb1_entry")
#endif
@@ -93,33 +93,25 @@ tlb1_entry:
* These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
* and must not collide with other TLB0 entries.
*/
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR),
- 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR),
- 0,0,0,0,0,1,0,1,0,1)
-
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 4 * 1024),
- 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 4 * 1024),
- 0,0,0,0,0,1,0,1,0,1)
-
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 8 * 1024),
- 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 8 * 1024),
- 0,0,0,0,0,1,0,1,0,1)
-
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 12 * 1024),
- 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 12 * 1024),
- 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, 0)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 4 * 1024, 0)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 4 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 8 * 1024, 0)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 8 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 12 * 1024, 0)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 12 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
@@ -127,50 +119,46 @@ tlb1_entry:
* 0xff000000 16M FLASH
* Out of reset this entry is only 4K.
*/
- .long TLB1_MAS0(1, 0, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_FLASH_BASE), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_FLASH_BASE), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)
+ .long FSL_BOOKE_MAS2(CFG_FLASH_BASE, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_FLASH_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 1: 256M Non-cacheable, guarded
* 0x80000000 256M PCI1 MEM First half
*/
- .long TLB1_MAS0(1, 1, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 1, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 2: 256M Non-cacheable, guarded
* 0x90000000 256M PCI1 MEM Second half
*/
- .long TLB1_MAS0(1, 2, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE + 0x10000000),
- 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE + 0x10000000),
- 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 2, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 3: 256M Non-cacheable, guarded
* 0xa0000000 256M PCI2 MEM First half
*/
- .long TLB1_MAS0(1, 3, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI2_MEM_BASE), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI2_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 3, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_PCI2_MEM_BASE, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_PCI2_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 4: 256M Non-cacheable, guarded
* 0xb0000000 256M PCI2 MEM Second half
*/
- .long TLB1_MAS0(1, 4, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI2_MEM_BASE + 0x10000000),
- 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI2_MEM_BASE + 0x10000000),
- 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 4, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_PCI2_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_PCI2_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 5: 64M Non-cacheable, guarded
@@ -178,28 +166,28 @@ tlb1_entry:
* 0xe200_0000 16M PCI1 IO
* 0xe300_0000 16M PCI2 IO
*/
- .long TLB1_MAS0(1, 5, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 5, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long FSL_BOOKE_MAS2(CFG_CCSRBAR, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_CCSRBAR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 6: 64M Cacheable, non-guarded
* 0xf000_0000 64M LBC SDRAM
*/
- .long TLB1_MAS0(1, 6, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 6, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long FSL_BOOKE_MAS2(CFG_LBC_SDRAM_BASE, 0)
+ .long FSL_BOOKE_MAS3(CFG_LBC_SDRAM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 7: 1M Non-cacheable, guarded
* 0xf8000000 1M CADMUS registers
*/
- .long TLB1_MAS0(1, 7, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1M)
- .long TLB1_MAS2(E500_TLB_EPN(CADMUS_BASE_ADDR), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CADMUS_BASE_ADDR), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 7, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1M)
+ .long FSL_BOOKE_MAS2(CADMUS_BASE_ADDR, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CADMUS_BASE_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
entry_end
diff --git a/board/freescale/mpc8544ds/init.S b/board/freescale/mpc8544ds/init.S
index 084d4b8..544dc07 100644
--- a/board/freescale/mpc8544ds/init.S
+++ b/board/freescale/mpc8544ds/init.S
@@ -40,7 +40,7 @@
*
* MAS0: tlbsel, esel, nv
* MAS1: valid, iprot, tid, ts, tsize
- * MAS2: epn, sharen, x0, x1, w, i, m, g, e
+ * MAS2: epn, x0, x1, w, i, m, g, e
* MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
*/
@@ -71,10 +71,10 @@ tlb1_entry:
* This ends up at a TLB0 Index==0 entry, and must not collide
* with other TLB0 Entries.
*/
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_CCSRBAR_DEFAULT, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_CCSRBAR_DEFAULT, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB0 16K Cacheable, guarded
@@ -87,33 +87,25 @@ tlb1_entry:
* These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
* and must not collide with other TLB0 entries.
*/
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR),
- 0,0,0,0,0,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR),
- 0,0,0,0,0,1,0,1,0,1)
-
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 4 * 1024),
- 0,0,0,0,0,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 4 * 1024),
- 0,0,0,0,0,1,0,1,0,1)
-
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 8 * 1024),
- 0,0,0,0,0,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 8 * 1024),
- 0,0,0,0,0,1,0,1,0,1)
-
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 12 * 1024),
- 0,0,0,0,0,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 12 * 1024),
- 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, (MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 4 * 1024, (MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 4 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 8 * 1024, (MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 8 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 12 * 1024, (MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 12 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
@@ -121,68 +113,63 @@ tlb1_entry:
* 0xfc000000 64M Covers FLASH at 0xFE800000 and 0xFF800000
* Out of reset this entry is only 4K.
*/
- .long TLB1_MAS0(1, 0, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_BOOT_BLOCK), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_BOOT_BLOCK), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long FSL_BOOKE_MAS2(CFG_BOOT_BLOCK, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_BOOT_BLOCK, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 1: 1G Non-cacheable, guarded
* 0x80000000 1G PCIE 8,9,a,b
*/
- .long TLB1_MAS0(1, 1, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1G)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_PCIE_PHYS),
- 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_PCIE_PHYS),
- 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 1, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1G)
+ .long FSL_BOOKE_MAS2(CFG_PCIE_PHYS, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_PCIE_PHYS, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 2: 256M Non-cacheable, guarded
*/
- .long TLB1_MAS0(1, 2, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI_PHYS),
- 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI_PHYS), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 2, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_PCI_PHYS, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_PCI_PHYS, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 3: 256M Non-cacheable, guarded
*/
- .long TLB1_MAS0(1, 3, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI_PHYS + 0x10000000),
- 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI_PHYS + 0x10000000),
- 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 3, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_PCI_PHYS + 0x10000000, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_PCI_PHYS + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 4: 64M Non-cacheable, guarded
* 0xe000_0000 1M CCSRBAR
* 0xe100_0000 255M PCI IO range
*/
- .long TLB1_MAS0(1, 4, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 4, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long FSL_BOOKE_MAS2(CFG_CCSRBAR, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_CCSRBAR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
#ifdef CFG_LBC_CACHE_BASE
/*
* TLB 5: 64M Cacheable, non-guarded
*/
- .long TLB1_MAS0(1, 5, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_LBC_CACHE_BASE), 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_LBC_CACHE_BASE), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 5, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long FSL_BOOKE_MAS2(CFG_LBC_CACHE_BASE, 0)
+ .long FSL_BOOKE_MAS3(CFG_LBC_CACHE_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
#endif
/*
* TLB 6: 64M Non-cacheable, guarded
* 0xf8000000 64M PIXIS 0xF8000000 - 0xFBFFFFFF
*/
- .long TLB1_MAS0(1, 6, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_LBC_NONCACHE_BASE), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_LBC_NONCACHE_BASE), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 6, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long FSL_BOOKE_MAS2(CFG_LBC_NONCACHE_BASE, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_LBC_NONCACHE_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
2:
entry_end
diff --git a/board/freescale/mpc8548cds/init.S b/board/freescale/mpc8548cds/init.S
index a83a095..ed0fc44 100644
--- a/board/freescale/mpc8548cds/init.S
+++ b/board/freescale/mpc8548cds/init.S
@@ -41,7 +41,7 @@
*
* MAS0: tlbsel, esel, nv
* MAS1: valid, iprot, tid, ts, tsize
- * MAS2: epn, sharen, x0, x1, w, i, m, g, e
+ * MAS2: epn, x0, x1, w, i, m, g, e
* MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
*/
@@ -74,10 +74,10 @@ tlb1_entry:
* This ends up at a TLB0 Index==0 entry, and must not collide
* with other TLB0 Entries.
*/
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_CCSRBAR_DEFAULT, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_CCSRBAR_DEFAULT, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
#else
#error("Update the number of table entries in tlb1_entry")
#endif
@@ -93,33 +93,25 @@ tlb1_entry:
* These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
* and must not collide with other TLB0 entries.
*/
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR),
- 0,0,0,0,0,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR),
- 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, (MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 4 * 1024),
- 0,0,0,0,0,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 4 * 1024),
- 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 4 * 1024, (MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 4 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 8 * 1024),
- 0,0,0,0,0,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 8 * 1024),
- 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 8 * 1024, (MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 8 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 12 * 1024),
- 0,0,0,0,0,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 12 * 1024),
- 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 12 * 1024, (MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 12 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
@@ -127,39 +119,36 @@ tlb1_entry:
* 0xff000000 16M FLASH
* Out of reset this entry is only 4K.
*/
- .long TLB1_MAS0(1, 0, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_BOOT_BLOCK), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_BOOT_BLOCK), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)
+ .long FSL_BOOKE_MAS2(CFG_BOOT_BLOCK, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_BOOT_BLOCK, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 1: 1G Non-cacheable, guarded
* 0x80000000 1G PCI1/PCIE 8,9,a,b
*/
- .long TLB1_MAS0(1, 1, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1G)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI_PHYS), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI_PHYS), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 1, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1G)
+ .long FSL_BOOKE_MAS2(CFG_PCI_PHYS, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_PCI_PHYS, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
#ifdef CFG_RIO_MEM_PHYS
/*
* TLB 2: 256M Non-cacheable, guarded
*/
- .long TLB1_MAS0(1, 2, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_RIO_MEM_PHYS),
- 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_RIO_MEM_PHYS), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 2, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_RIO_MEM_PHYS, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_RIO_MEM_PHYS, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 3: 256M Non-cacheable, guarded
*/
- .long TLB1_MAS0(1, 3, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_RIO_MEM_PHYS + 0x10000000),
- 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_RIO_MEM_PHYS + 0x10000000),
- 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 3, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_RIO_MEM_PHYS + 0x10000000, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_RIO_MEM_PHYS + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
#endif
/*
* TLB 5: 64M Non-cacheable, guarded
@@ -168,28 +157,28 @@ tlb1_entry:
* 0xe210_0000 1M PCI2 IO
* 0xe300_0000 1M PCIe IO
*/
- .long TLB1_MAS0(1, 5, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 5, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long FSL_BOOKE_MAS2(CFG_CCSRBAR, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_CCSRBAR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 6: 64M Cacheable, non-guarded
* 0xf000_0000 64M LBC SDRAM
*/
- .long TLB1_MAS0(1, 6, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_LBC_CACHE_BASE), 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_LBC_CACHE_BASE), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 6, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long FSL_BOOKE_MAS2(CFG_LBC_CACHE_BASE, 0)
+ .long FSL_BOOKE_MAS3(CFG_LBC_CACHE_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 7: 64M Non-cacheable, guarded
* 0xf8000000 64M CADMUS registers, relocated L2SRAM
*/
- .long TLB1_MAS0(1, 7, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_LBC_NONCACHE_BASE), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_LBC_NONCACHE_BASE), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 7, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long FSL_BOOKE_MAS2(CFG_LBC_NONCACHE_BASE, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_LBC_NONCACHE_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
2:
entry_end
diff --git a/board/freescale/mpc8555cds/init.S b/board/freescale/mpc8555cds/init.S
index 978bda5..8c8c087 100644
--- a/board/freescale/mpc8555cds/init.S
+++ b/board/freescale/mpc8555cds/init.S
@@ -42,7 +42,7 @@
*
* MAS0: tlbsel, esel, nv
* MAS1: valid, iprot, tid, ts, tsize
- * MAS2: epn, sharen, x0, x1, w, i, m, g, e
+ * MAS2: epn, x0, x1, w, i, m, g, e
* MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
*/
@@ -74,10 +74,10 @@ tlb1_entry:
* This ends up at a TLB0 Index==0 entry, and must not collide
* with other TLB0 Entries.
*/
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_CCSRBAR_DEFAULT, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_CCSRBAR_DEFAULT, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
#else
#error("Update the number of table entries in tlb1_entry")
#endif
@@ -93,33 +93,25 @@ tlb1_entry:
* These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
* and must not collide with other TLB0 entries.
*/
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR),
- 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR),
- 0,0,0,0,0,1,0,1,0,1)
-
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 4 * 1024),
- 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 4 * 1024),
- 0,0,0,0,0,1,0,1,0,1)
-
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 8 * 1024),
- 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 8 * 1024),
- 0,0,0,0,0,1,0,1,0,1)
-
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 12 * 1024),
- 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 12 * 1024),
- 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, 0)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 4 * 1024, 0)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 4 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 8 * 1024, 0)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 8 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 12 * 1024, 0)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 12 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
@@ -127,50 +119,46 @@ tlb1_entry:
* 0xff000000 16M FLASH
* Out of reset this entry is only 4K.
*/
- .long TLB1_MAS0(1, 0, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_FLASH_BASE), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_FLASH_BASE), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)
+ .long FSL_BOOKE_MAS2(CFG_FLASH_BASE, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_FLASH_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 1: 256M Non-cacheable, guarded
* 0x80000000 256M PCI1 MEM First half
*/
- .long TLB1_MAS0(1, 1, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 1, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 2: 256M Non-cacheable, guarded
* 0x90000000 256M PCI1 MEM Second half
*/
- .long TLB1_MAS0(1, 2, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE + 0x10000000),
- 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE + 0x10000000),
- 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 2, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 3: 256M Non-cacheable, guarded
* 0xa0000000 256M PCI2 MEM First half
*/
- .long TLB1_MAS0(1, 3, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI2_MEM_BASE), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI2_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 3, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_PCI2_MEM_BASE, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_PCI2_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 4: 256M Non-cacheable, guarded
* 0xb0000000 256M PCI2 MEM Second half
*/
- .long TLB1_MAS0(1, 4, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI2_MEM_BASE + 0x10000000),
- 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI2_MEM_BASE + 0x10000000),
- 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 4, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_PCI2_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_PCI2_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 5: 64M Non-cacheable, guarded
@@ -178,28 +166,28 @@ tlb1_entry:
* 0xe200_0000 16M PCI1 IO
* 0xe300_0000 16M PCI2 IO
*/
- .long TLB1_MAS0(1, 5, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 5, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long FSL_BOOKE_MAS2(CFG_CCSRBAR, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_CCSRBAR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 6: 64M Cacheable, non-guarded
* 0xf000_0000 64M LBC SDRAM
*/
- .long TLB1_MAS0(1, 6, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 6, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long FSL_BOOKE_MAS2(CFG_LBC_SDRAM_BASE, 0)
+ .long FSL_BOOKE_MAS3(CFG_LBC_SDRAM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 7: 1M Non-cacheable, guarded
* 0xf8000000 1M CADMUS registers
*/
- .long TLB1_MAS0(1, 7, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1M)
- .long TLB1_MAS2(E500_TLB_EPN(CADMUS_BASE_ADDR), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CADMUS_BASE_ADDR), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 7, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1M)
+ .long FSL_BOOKE_MAS2(CADMUS_BASE_ADDR, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CADMUS_BASE_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
entry_end
diff --git a/board/freescale/mpc8560ads/init.S b/board/freescale/mpc8560ads/init.S
index 544fde9..37fd0c6 100644
--- a/board/freescale/mpc8560ads/init.S
+++ b/board/freescale/mpc8560ads/init.S
@@ -43,7 +43,7 @@
*
* MAS0: tlbsel, esel, nv
* MAS1: valid, iprot, tid, ts, tsize
- * MAS2: epn, sharen, x0, x1, w, i, m, g, e
+ * MAS2: epn, x0, x1, w, i, m, g, e
* MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
*/
@@ -75,10 +75,10 @@ tlb1_entry:
* This ends up at a TLB0 Index==0 entry, and must not collide
* with other TLB0 Entries.
*/
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_CCSRBAR_DEFAULT, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_CCSRBAR_DEFAULT, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
#else
#error("Update the number of table entries in tlb1_entry")
#endif
@@ -94,33 +94,25 @@ tlb1_entry:
* These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
* and must not collide with other TLB0 entries.
*/
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR),
- 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR),
- 0,0,0,0,0,1,0,1,0,1)
-
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 4 * 1024),
- 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 4 * 1024),
- 0,0,0,0,0,1,0,1,0,1)
-
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 8 * 1024),
- 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 8 * 1024),
- 0,0,0,0,0,1,0,1,0,1)
-
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 12 * 1024),
- 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 12 * 1024),
- 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, 0)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 4 * 1024, 0)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 4 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 8 * 1024, 0)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 8 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 12 * 1024, 0)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 12 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
@@ -128,78 +120,74 @@ tlb1_entry:
* 0xff000000 16M FLASH
* Out of reset this entry is only 4K.
*/
- .long TLB1_MAS0(1, 0, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_FLASH_BASE), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_FLASH_BASE), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)
+ .long FSL_BOOKE_MAS2(CFG_FLASH_BASE, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_FLASH_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 1: 256M Non-cacheable, guarded
* 0x80000000 256M PCI1 MEM First half
*/
- .long TLB1_MAS0(1, 1, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 1, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 2: 256M Non-cacheable, guarded
* 0x90000000 256M PCI1 MEM Second half
*/
- .long TLB1_MAS0(1, 2, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE + 0x10000000),
- 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE + 0x10000000),
- 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 2, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 3: 256M Non-cacheable, guarded
* 0xc0000000 256M Rapid IO MEM First half
*/
- .long TLB1_MAS0(1, 3, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_RIO_MEM_BASE), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_RIO_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 3, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_RIO_MEM_BASE, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_RIO_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 4: 256M Non-cacheable, guarded
* 0xd0000000 256M Rapid IO MEM Second half
*/
- .long TLB1_MAS0(1, 4, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_RIO_MEM_BASE + 0x10000000),
- 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_RIO_MEM_BASE + 0x10000000),
- 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 4, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_RIO_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_RIO_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 5: 64M Non-cacheable, guarded
* 0xe000_0000 1M CCSRBAR
* 0xe200_0000 16M PCI1 IO
*/
- .long TLB1_MAS0(1, 5, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 5, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long FSL_BOOKE_MAS2(CFG_CCSRBAR, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_CCSRBAR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 6: 64M Cacheable, non-guarded
* 0xf000_0000 64M LBC SDRAM
*/
- .long TLB1_MAS0(1, 6, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 6, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long FSL_BOOKE_MAS2(CFG_LBC_SDRAM_BASE, 0)
+ .long FSL_BOOKE_MAS3(CFG_LBC_SDRAM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 7: 16K Non-cacheable, guarded
* 0xf8000000 16K BCSR registers
*/
- .long TLB1_MAS0(1, 7, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16K)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_BCSR), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_BCSR), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 7, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16K)
+ .long FSL_BOOKE_MAS2(CFG_BCSR, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_BCSR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
#if !defined(CONFIG_SPD_EEPROM)
/*
@@ -211,17 +199,15 @@ tlb1_entry:
* Likely it needs to be increased by two for these entries.
*/
#error("Update the number of table entries in tlb1_entry")
- .long TLB1_MAS0(1, 8, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_DDR_SDRAM_BASE), 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_DDR_SDRAM_BASE), 0,0,0,0,0,1,0,1,0,1)
-
- .long TLB1_MAS0(1, 9, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_DDR_SDRAM_BASE + 0x4000000),
- 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_DDR_SDRAM_BASE + 0x4000000),
- 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 8, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long FSL_BOOKE_MAS2(CFG_DDR_SDRAM_BASE, 0)
+ .long FSL_BOOKE_MAS3(CFG_DDR_SDRAM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ .long FSL_BOOKE_MAS0(1, 9, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long FSL_BOOKE_MAS2(CFG_DDR_SDRAM_BASE + 0x4000000, 0)
+ .long FSL_BOOKE_MAS3(CFG_DDR_SDRAM_BASE + 0x4000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
#endif
entry_end
diff --git a/board/freescale/mpc8568mds/bcsr.c b/board/freescale/mpc8568mds/bcsr.c
index aae0f98..791a50f 100644
--- a/board/freescale/mpc8568mds/bcsr.c
+++ b/board/freescale/mpc8568mds/bcsr.c
@@ -21,6 +21,8 @@
*/
#include <common.h>
+#include <asm/io.h>
+
#include "bcsr.h"
void enable_8568mds_duart()
@@ -54,3 +56,22 @@ void enable_8568mds_qe_mdio()
bcsr[7] |= 0x01;
}
+
+#if defined(CONFIG_UEC_ETH1) || defined(CONFIG_UEC_ETH2)
+void reset_8568mds_uccs(void)
+{
+ volatile u8 *bcsr = (u8 *)(CFG_BCSR);
+
+ /* Turn off UCC1 & UCC2 */
+ out_8(&bcsr[8], in_8(&bcsr[8]) & ~BCSR_UCC1_GETH_EN);
+ out_8(&bcsr[9], in_8(&bcsr[9]) & ~BCSR_UCC2_GETH_EN);
+
+ /* Mode is RGMII, all bits clear */
+ out_8(&bcsr[11], in_8(&bcsr[11]) & ~(BCSR_UCC1_MODE_MSK |
+ BCSR_UCC2_MODE_MSK));
+
+ /* Turn UCC1 & UCC2 on */
+ out_8(&bcsr[8], in_8(&bcsr[8]) | BCSR_UCC1_GETH_EN);
+ out_8(&bcsr[9], in_8(&bcsr[9]) | BCSR_UCC2_GETH_EN);
+}
+#endif
diff --git a/board/freescale/mpc8568mds/bcsr.h b/board/freescale/mpc8568mds/bcsr.h
index aefd9bf..f7f70bc 100644
--- a/board/freescale/mpc8568mds/bcsr.h
+++ b/board/freescale/mpc8568mds/bcsr.h
@@ -90,6 +90,11 @@
7 Flash write protect
*/
+#define BCSR_UCC1_GETH_EN (0x1 << 7)
+#define BCSR_UCC2_GETH_EN (0x1 << 7)
+#define BCSR_UCC1_MODE_MSK (0x3 << 4)
+#define BCSR_UCC2_MODE_MSK (0x3 << 0)
+
/*BCSR Utils functions*/
void enable_8568mds_duart(void);
@@ -97,4 +102,8 @@ void enable_8568mds_flash_write(void);
void disable_8568mds_flash_write(void);
void enable_8568mds_qe_mdio(void);
+#if defined(CONFIG_UEC_ETH1) || defined(CONFIG_UEC_ETH2)
+void reset_8568mds_uccs(void);
+#endif
+
#endif /* __BCSR_H_ */
diff --git a/board/freescale/mpc8568mds/init.S b/board/freescale/mpc8568mds/init.S
index e36036d..2748c51 100644
--- a/board/freescale/mpc8568mds/init.S
+++ b/board/freescale/mpc8568mds/init.S
@@ -41,7 +41,7 @@
*
* MAS0: tlbsel, esel, nv
* MAS1: valid, iprot, tid, ts, tsize
- * MAS2: epn, sharen, x0, x1, w, i, m, g, e
+ * MAS2: epn, x0, x1, w, i, m, g, e
* MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
*/
#define entry_start \
@@ -73,10 +73,10 @@ tlb1_entry:
* This ends up at a TLB0 Index==0 entry, and must not collide
* with other TLB0 Entries.
*/
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_CCSRBAR_DEFAULT, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_CCSRBAR_DEFAULT, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
#else
#error("Update the number of table entries in tlb1_entry")
#endif
@@ -93,31 +93,25 @@ tlb1_entry:
* and must not collide with other TLB0 entries.
*/
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR), 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR), 0,0,0,0,0,1,0,1,0,1)
-
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 4 * 1024),
- 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 4 * 1024),
- 0,0,0,0,0,1,0,1,0,1)
-
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 8 * 1024),
- 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 8 * 1024),
- 0,0,0,0,0,1,0,1,0,1)
-
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 12 * 1024),
- 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 12 * 1024),
- 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, 0)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 4 * 1024, 0)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 4 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 8 * 1024, 0)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 8 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 12 * 1024, 0)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 12 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/* TLB 1 Initializations */
/*
@@ -125,31 +119,29 @@ tlb1_entry:
* 0xff000000 16M FLASH (upper half)
* Out of reset this entry is only 4K.
*/
- .long TLB1_MAS0(1, 0, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_FLASH_BASE + 0x1000000),
- 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_FLASH_BASE + 0x1000000),
- 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)
+ .long FSL_BOOKE_MAS2(CFG_FLASH_BASE + 0x1000000, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_FLASH_BASE + 0x1000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLBe 1: 16M Non-cacheable, guarded
* 0xfe000000 16M FLASH (lower half)
*/
- .long TLB1_MAS0(1, 1, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_FLASH_BASE), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_FLASH_BASE), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 1, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)
+ .long FSL_BOOKE_MAS2(CFG_FLASH_BASE, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_FLASH_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLBe 2: 1G Non-cacheable, guarded
* 0x80000000 512M PCI1 MEM
* 0xa0000000 512M PCIe MEM
*/
- .long TLB1_MAS0(1, 2, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1G)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 2, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1G)
+ .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLBe 3: 64M Non-cacheable, guarded
@@ -157,19 +149,19 @@ tlb1_entry:
* 0xe200_0000 8M PCI1 IO
* 0xe280_0000 8M PCIe IO
*/
- .long TLB1_MAS0(1, 3, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 3, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long FSL_BOOKE_MAS2(CFG_CCSRBAR, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_CCSRBAR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLBe 4: 64M Cacheable, non-guarded
* 0xf000_0000 64M LBC SDRAM
*/
- .long TLB1_MAS0(1, 4, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 4, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long FSL_BOOKE_MAS2(CFG_LBC_SDRAM_BASE, 0)
+ .long FSL_BOOKE_MAS3(CFG_LBC_SDRAM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLBe 5: 256K Non-cacheable, guarded
@@ -177,10 +169,10 @@ tlb1_entry:
* 0xf8008000 32K PIB (CS4)
* 0xf8010000 32K PIB (CS5)
*/
- .long TLB1_MAS0(1, 5, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256K)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_BCSR_BASE), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_BCSR_BASE), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 5, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256K)
+ .long FSL_BOOKE_MAS2(CFG_BCSR_BASE, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_BCSR_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
2:
entry_end
diff --git a/board/freescale/mpc8568mds/mpc8568mds.c b/board/freescale/mpc8568mds/mpc8568mds.c
index 460cb1b..3c3726b 100644
--- a/board/freescale/mpc8568mds/mpc8568mds.c
+++ b/board/freescale/mpc8568mds/mpc8568mds.c
@@ -87,6 +87,13 @@ const qe_iop_conf_t qe_iop_conf_tab[] = {
{1, 31, 2, 0, 3}, /* GTX125 */
{4, 6, 3, 0, 2}, /* MDIO */
{4, 5, 1, 0, 2}, /* MDC */
+
+ /* UART1 */
+ {2, 0, 1, 0, 2}, /* UART_SOUT1 */
+ {2, 1, 1, 0, 2}, /* UART_RTS1 */
+ {2, 2, 2, 0, 2}, /* UART_CTS1 */
+ {2, 3, 2, 0, 2}, /* UART_SIN1 */
+
{0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */
};
@@ -109,6 +116,9 @@ int board_early_init_f (void)
enable_8568mds_duart();
enable_8568mds_flash_write();
+#if defined(CONFIG_UEC_ETH1) || defined(CONFIG_UEC_ETH2)
+ reset_8568mds_uccs();
+#endif
#if defined(CONFIG_QE) && !defined(CONFIG_eTSEC_MDIO_BUS)
enable_8568mds_qe_mdio();
#endif
diff --git a/board/mpc8540eval/init.S b/board/mpc8540eval/init.S
index 8c2ca65..a8ac3fb 100644
--- a/board/mpc8540eval/init.S
+++ b/board/mpc8540eval/init.S
@@ -46,93 +46,93 @@ tlb1_entry:
.long 0x0a /* the following data table uses a few of 16 TLB entries */
- .long TLB1_MAS0(1,1,0)
- .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_1M)
- .long TLB1_MAS2(((CFG_CCSRBAR>>12) & 0xfffff),0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(((CFG_CCSRBAR>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1,1,0)
+ .long FSL_BOOKE_MAS1(1,1,0,0,BOOKE_PAGESZ_1M)
+ .long FSL_BOOKE_MAS2(CFG_CCSRBAR,(MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_CCSRBAR,0,(MAS3_SX|MAS3_SW|MAS3_SR))
#if defined(CFG_FLASH_PORT_WIDTH_16)
- .long TLB1_MAS0(1,2,0)
- .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_4M)
- .long TLB1_MAS2(((CFG_FLASH_BASE>>12) & 0xfffff),0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(((CFG_FLASH_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
-
- .long TLB1_MAS0(1,3,0)
- .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_4M)
- .long TLB1_MAS2((((CFG_FLASH_BASE+0x400000)>>12)&0xfffff),0,0,0,0,1,0,1,0)
- .long TLB1_MAS3((((CFG_FLASH_BASE+0x400000)>>12)&0xfffff),0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1,2,0)
+ .long FSL_BOOKE_MAS1(1,1,0,0,BOOKE_PAGESZ_4M)
+ .long FSL_BOOKE_MAS2(CFG_FLASH_BASE,(MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_FLASH_BASE,0,(MAS3_SX|MAS3_SW|MAS3_SR))
+
+ .long FSL_BOOKE_MAS0(1,3,0)
+ .long FSL_BOOKE_MAS1(1,1,0,0,BOOKE_PAGESZ_4M)
+ .long FSL_BOOKE_MAS2(CFG_FLASH_BASE+0x400000,(MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_FLASH_BASE+0x400000,0,(MAS3_SX|MAS3_SW|MAS3_SR))
#else
- .long TLB1_MAS0(1,2,0)
- .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_16M)
- .long TLB1_MAS2(((CFG_FLASH_BASE>>12) & 0xfffff),0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(((CFG_FLASH_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
-
- .long TLB1_MAS0(1,3,0)
- .long TLB1_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
- .long TLB1_MAS2(0,0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(0,0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1,2,0)
+ .long FSL_BOOKE_MAS1(1,1,0,0,BOOKE_PAGESZ_16M)
+ .long FSL_BOOKE_MAS2(CFG_FLASH_BASE,(MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_FLASH_BASE,0,(MAS3_SX|MAS3_SW|MAS3_SR))
+
+ .long FSL_BOOKE_MAS0(1,3,0)
+ .long FSL_BOOKE_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
+ .long FSL_BOOKE_MAS2(0,0)
+ .long FSL_BOOKE_MAS3(0,0,(MAS3_SX|MAS3_SW|MAS3_SR))
#endif
#if !defined(CONFIG_SPD_EEPROM)
- .long TLB1_MAS0(1,4,0)
- .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_64M)
- .long TLB1_MAS2(((CFG_DDR_SDRAM_BASE>>12) & 0xfffff),0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(((CFG_DDR_SDRAM_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
-
- .long TLB1_MAS0(1,5,0)
- .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_64M)
- .long TLB1_MAS2((((CFG_DDR_SDRAM_BASE+0x4000000)>>12) & 0xfffff),0,0,0,0,0,0,0,0)
- .long TLB1_MAS3((((CFG_DDR_SDRAM_BASE+0x4000000)>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1,4,0)
+ .long FSL_BOOKE_MAS1(1,1,0,0,BOOKE_PAGESZ_64M)
+ .long FSL_BOOKE_MAS2(CFG_DDR_SDRAM_BASE,0)
+ .long FSL_BOOKE_MAS3(CFG_DDR_SDRAM_BASE,0,(MAS3_SX|MAS3_SW|MAS3_SR))
+
+ .long FSL_BOOKE_MAS0(1,5,0)
+ .long FSL_BOOKE_MAS1(1,1,0,0,BOOKE_PAGESZ_64M)
+ .long FSL_BOOKE_MAS2(CFG_DDR_SDRAM_BASE+0x4000000,0)
+ .long FSL_BOOKE_MAS3(CFG_DDR_SDRAM_BASE+0x4000000,0,(MAS3_SX|MAS3_SW|MAS3_SR))
#else
- .long TLB1_MAS0(1,4,0)
- .long TLB1_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
- .long TLB1_MAS2(0,0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(0,0,0,0,0,0,1,0,1,0,1)
-
- .long TLB1_MAS0(1,5,0)
- .long TLB1_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
- .long TLB1_MAS2(0,0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(0,0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1,4,0)
+ .long FSL_BOOKE_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
+ .long FSL_BOOKE_MAS2(0,0)
+ .long FSL_BOOKE_MAS3(0,0,(MAS3_SX|MAS3_SW|MAS3_SR))
+
+ .long FSL_BOOKE_MAS0(1,5,0)
+ .long FSL_BOOKE_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
+ .long FSL_BOOKE_MAS2(0,0)
+ .long FSL_BOOKE_MAS3(0,0,(MAS3_SX|MAS3_SW|MAS3_SR))
#endif
- .long TLB1_MAS0(1,6,0)
- .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_64M)
+ .long FSL_BOOKE_MAS0(1,6,0)
+ .long FSL_BOOKE_MAS1(1,1,0,0,BOOKE_PAGESZ_64M)
#if defined(CONFIG_RAM_AS_FLASH)
- .long TLB1_MAS2(((CFG_LBC_SDRAM_BASE>>12) & 0xfffff),0,0,0,0,1,0,1,0)
+ .long FSL_BOOKE_MAS2(CFG_LBC_SDRAM_BASE,(MAS2_I|MAS2_G))
#else
- .long TLB1_MAS2(((CFG_LBC_SDRAM_BASE>>12) & 0xfffff),0,0,0,0,0,0,0,0)
+ .long FSL_BOOKE_MAS2(CFG_LBC_SDRAM_BASE,0)
#endif
- .long TLB1_MAS3(((CFG_LBC_SDRAM_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS3(CFG_LBC_SDRAM_BASE,0,(MAS3_SX|MAS3_SW|MAS3_SR))
- .long TLB1_MAS0(1,7,0)
- .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_16K)
+ .long FSL_BOOKE_MAS0(1,7,0)
+ .long FSL_BOOKE_MAS1(1,1,0,0,BOOKE_PAGESZ_16K)
#ifdef CONFIG_L2_INIT_RAM
- .long TLB1_MAS2(((CFG_INIT_RAM_ADDR>>12) & 0xfffff),0,0,0,1,0,0,0,0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR,0,0,0,1,0,0,0,0)
#else
- .long TLB1_MAS2(((CFG_INIT_RAM_ADDR>>12) & 0xfffff),0,0,0,0,0,0,0,0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR,0)
#endif
- .long TLB1_MAS3(((CFG_INIT_RAM_ADDR>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR,0,(MAS3_SX|MAS3_SW|MAS3_SR))
- .long TLB1_MAS0(1,8,0)
- .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(((CFG_PCI_MEM_BASE>>12) & 0xfffff),0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(((CFG_PCI_MEM_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1,8,0)
+ .long FSL_BOOKE_MAS1(1,1,0,0,BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_PCI_MEM_BASE,(MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_PCI_MEM_BASE,0,(MAS3_SX|MAS3_SW|MAS3_SR))
- .long TLB1_MAS0(1,9,0)
- .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_16K)
- .long TLB1_MAS2(((CFG_BCSR>>12) & 0xfffff),0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(((CFG_BCSR>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1,9,0)
+ .long FSL_BOOKE_MAS1(1,1,0,0,BOOKE_PAGESZ_16K)
+ .long FSL_BOOKE_MAS2(CFG_BCSR,(MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_BCSR,0,(MAS3_SX|MAS3_SW|MAS3_SR))
#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
- .long TLB1_MAS0(1,15,0)
- .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_1M)
- .long TLB1_MAS2(((CFG_CCSRBAR_DEFAULT>>12) & 0xfffff),0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(((CFG_CCSRBAR_DEFAULT>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1,15,0)
+ .long FSL_BOOKE_MAS1(1,1,0,0,BOOKE_PAGESZ_1M)
+ .long FSL_BOOKE_MAS2(CFG_CCSRBAR_DEFAULT,(MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_CCSRBAR_DEFAULT,0,(MAS3_SX|MAS3_SW|MAS3_SR))
#else
- .long TLB1_MAS0(1,15,0)
- .long TLB1_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
- .long TLB1_MAS2(0,0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(0,0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1,15,0)
+ .long FSL_BOOKE_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
+ .long FSL_BOOKE_MAS2(0,0)
+ .long FSL_BOOKE_MAS3(0,0,(MAS3_SX|MAS3_SW|MAS3_SR))
#endif
entry_end
diff --git a/board/pm854/init.S b/board/pm854/init.S
index ade5d6e..0a403ab 100644
--- a/board/pm854/init.S
+++ b/board/pm854/init.S
@@ -43,7 +43,7 @@
*
* MAS0: tlbsel, esel, nv
* MAS1: valid, iprot, tid, ts, tsize
- * MAS2: epn, sharen, x0, x1, w, i, m, g, e
+ * MAS2: epn, x0, x1, w, i, m, g, e
* MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
*/
@@ -75,10 +75,10 @@ tlb1_entry:
* This ends up at a TLB0 Index==0 entry, and must not collide
* with other TLB0 Entries.
*/
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_CCSRBAR_DEFAULT, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_CCSRBAR_DEFAULT, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
#else
#error("Update the number of table entries in tlb1_entry")
#endif
@@ -94,33 +94,25 @@ tlb1_entry:
* These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
* and must not collide with other TLB0 entries.
*/
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR),
- 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR),
- 0,0,0,0,0,1,0,1,0,1)
-
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 4 * 1024),
- 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 4 * 1024),
- 0,0,0,0,0,1,0,1,0,1)
-
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 8 * 1024),
- 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 8 * 1024),
- 0,0,0,0,0,1,0,1,0,1)
-
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 12 * 1024),
- 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 12 * 1024),
- 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, 0)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 4 * 1024, 0)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 4 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 8 * 1024, 0)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 8 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 12 * 1024, 0)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 12 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
@@ -128,69 +120,65 @@ tlb1_entry:
* 0xfc000000 64M FLASH (8,16,32 or 64 MB)
* Out of reset this entry is only 4K.
*/
- .long TLB1_MAS0(1, 0, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long TLB1_MAS2(E500_TLB_EPN(0xfc000000), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(0xfc000000), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long FSL_BOOKE_MAS2(0xfc000000, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(0xfc000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 1: 256M Non-cacheable, guarded
* 0x80000000 256M PCI1 MEM First half
*/
- .long TLB1_MAS0(1, 1, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 1, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 2: 256M Non-cacheable, guarded
* 0x90000000 256M PCI1 MEM Second half
*/
- .long TLB1_MAS0(1, 2, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE + 0x10000000),
- 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE + 0x10000000),
- 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 2, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 3: 256M Non-cacheable, guarded
* 0xc0000000 256M Rapid IO MEM First half
*/
- .long TLB1_MAS0(1, 3, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_RIO_MEM_BASE), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_RIO_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 3, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_RIO_MEM_BASE, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_RIO_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 4: 256M Non-cacheable, guarded
* 0xd0000000 256M Rapid IO MEM Second half
*/
- .long TLB1_MAS0(1, 4, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_RIO_MEM_BASE + 0x10000000),
- 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_RIO_MEM_BASE + 0x10000000),
- 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 4, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_RIO_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_RIO_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 5: 64M Non-cacheable, guarded
* 0xe000_0000 1M CCSRBAR
* 0xe200_0000 16M PCI1 IO
*/
- .long TLB1_MAS0(1, 5, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 5, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long FSL_BOOKE_MAS2(CFG_CCSRBAR, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_CCSRBAR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 6: 64M Cacheable, non-guarded
* 0xf000_0000 64M LBC SDRAM
*/
- .long TLB1_MAS0(1, 6, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 6, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long FSL_BOOKE_MAS2(CFG_LBC_SDRAM_BASE, 0)
+ .long FSL_BOOKE_MAS3(CFG_LBC_SDRAM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
#if !defined(CONFIG_SPD_EEPROM)
/*
@@ -201,10 +189,10 @@ tlb1_entry:
* Likely it needs to be increased by two for these entries.
*/
- .long TLB1_MAS0(1, 7, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_DDR_SDRAM_BASE), 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_DDR_SDRAM_BASE), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 7, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_DDR_SDRAM_BASE, 0)
+ .long FSL_BOOKE_MAS3(CFG_DDR_SDRAM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
#endif
entry_end
diff --git a/board/pm856/init.S b/board/pm856/init.S
index ade5d6e..0a403ab 100644
--- a/board/pm856/init.S
+++ b/board/pm856/init.S
@@ -43,7 +43,7 @@
*
* MAS0: tlbsel, esel, nv
* MAS1: valid, iprot, tid, ts, tsize
- * MAS2: epn, sharen, x0, x1, w, i, m, g, e
+ * MAS2: epn, x0, x1, w, i, m, g, e
* MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
*/
@@ -75,10 +75,10 @@ tlb1_entry:
* This ends up at a TLB0 Index==0 entry, and must not collide
* with other TLB0 Entries.
*/
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_CCSRBAR_DEFAULT, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_CCSRBAR_DEFAULT, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
#else
#error("Update the number of table entries in tlb1_entry")
#endif
@@ -94,33 +94,25 @@ tlb1_entry:
* These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
* and must not collide with other TLB0 entries.
*/
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR),
- 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR),
- 0,0,0,0,0,1,0,1,0,1)
-
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 4 * 1024),
- 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 4 * 1024),
- 0,0,0,0,0,1,0,1,0,1)
-
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 8 * 1024),
- 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 8 * 1024),
- 0,0,0,0,0,1,0,1,0,1)
-
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 12 * 1024),
- 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 12 * 1024),
- 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, 0)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 4 * 1024, 0)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 4 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 8 * 1024, 0)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 8 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 12 * 1024, 0)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 12 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
@@ -128,69 +120,65 @@ tlb1_entry:
* 0xfc000000 64M FLASH (8,16,32 or 64 MB)
* Out of reset this entry is only 4K.
*/
- .long TLB1_MAS0(1, 0, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long TLB1_MAS2(E500_TLB_EPN(0xfc000000), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(0xfc000000), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long FSL_BOOKE_MAS2(0xfc000000, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(0xfc000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 1: 256M Non-cacheable, guarded
* 0x80000000 256M PCI1 MEM First half
*/
- .long TLB1_MAS0(1, 1, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 1, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 2: 256M Non-cacheable, guarded
* 0x90000000 256M PCI1 MEM Second half
*/
- .long TLB1_MAS0(1, 2, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE + 0x10000000),
- 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE + 0x10000000),
- 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 2, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 3: 256M Non-cacheable, guarded
* 0xc0000000 256M Rapid IO MEM First half
*/
- .long TLB1_MAS0(1, 3, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_RIO_MEM_BASE), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_RIO_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 3, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_RIO_MEM_BASE, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_RIO_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 4: 256M Non-cacheable, guarded
* 0xd0000000 256M Rapid IO MEM Second half
*/
- .long TLB1_MAS0(1, 4, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_RIO_MEM_BASE + 0x10000000),
- 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_RIO_MEM_BASE + 0x10000000),
- 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 4, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_RIO_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_RIO_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 5: 64M Non-cacheable, guarded
* 0xe000_0000 1M CCSRBAR
* 0xe200_0000 16M PCI1 IO
*/
- .long TLB1_MAS0(1, 5, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 5, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long FSL_BOOKE_MAS2(CFG_CCSRBAR, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_CCSRBAR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 6: 64M Cacheable, non-guarded
* 0xf000_0000 64M LBC SDRAM
*/
- .long TLB1_MAS0(1, 6, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 6, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long FSL_BOOKE_MAS2(CFG_LBC_SDRAM_BASE, 0)
+ .long FSL_BOOKE_MAS3(CFG_LBC_SDRAM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
#if !defined(CONFIG_SPD_EEPROM)
/*
@@ -201,10 +189,10 @@ tlb1_entry:
* Likely it needs to be increased by two for these entries.
*/
- .long TLB1_MAS0(1, 7, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_DDR_SDRAM_BASE), 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_DDR_SDRAM_BASE), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 7, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_DDR_SDRAM_BASE, 0)
+ .long FSL_BOOKE_MAS3(CFG_DDR_SDRAM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
#endif
entry_end
diff --git a/board/sbc8548/Makefile b/board/sbc8548/Makefile
new file mode 100644
index 0000000..1596525
--- /dev/null
+++ b/board/sbc8548/Makefile
@@ -0,0 +1,55 @@
+#
+# (C) Copyright 2004-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2004 Wind River Systems Inc <www.windriver.com>.
+# Added support for Wind River SBC8560 board
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := $(BOARD).o
+SOBJS := init.o
+#SOBJS :=
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+ rm -f $(OBJS) $(SOBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/sbc8548/config.mk b/board/sbc8548/config.mk
new file mode 100644
index 0000000..c9fa3ad
--- /dev/null
+++ b/board/sbc8548/config.mk
@@ -0,0 +1,32 @@
+#
+# Copyright 2004, 2007 Freescale Semiconductor.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# sbc8548 board
+#
+ifndef TEXT_BASE
+TEXT_BASE = 0xfff80000
+endif
+
+PLATFORM_CPPFLAGS += -DCONFIG_E500=1
+PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1
+PLATFORM_CPPFLAGS += -DCONFIG_MPC8548=1
diff --git a/board/sbc8548/init.S b/board/sbc8548/init.S
new file mode 100644
index 0000000..cafa214
--- /dev/null
+++ b/board/sbc8548/init.S
@@ -0,0 +1,241 @@
+/*
+ * Copyright 2007 Wind River Systemes, Inc. <www.windriver.com>
+ * Copyright 2007 Embedded Specialties, Inc.
+ *
+ * Copyright 2004 Freescale Semiconductor.
+ * Copyright 2002,2003, Motorola Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+#include <asm/cache.h>
+#include <asm/mmu.h>
+#include <config.h>
+#include <mpc85xx.h>
+
+
+/*
+ * TLB0 and TLB1 Entries
+ *
+ * Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR.
+ * However, CCSRBAR is then relocated to CFG_CCSRBAR right after
+ * these TLB entries are established.
+ *
+ * The TLB entries for DDR are dynamically setup in spd_sdram()
+ * and use TLB1 Entries 8 through 15 as needed according to the
+ * size of DDR memory.
+ *
+ * MAS0: tlbsel, esel, nv
+ * MAS1: valid, iprot, tid, ts, tsize
+ * MAS2: epn, x0, x1, w, i, m, g, e
+ * MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
+ */
+
+#define entry_start \
+ mflr r1 ; \
+ bl 0f ;
+
+#define entry_end \
+0: mflr r0 ; \
+ mtlr r1 ; \
+ blr ;
+
+ .section .bootpg, "ax"
+ .globl tlb1_entry
+
+tlb1_entry:
+ entry_start
+
+ /*
+ * Number of TLB0 and TLB1 entries in the following table
+ */
+ .long 13
+
+#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
+ /*
+ * TLB0 4K Non-cacheable, guarded
+ * 0xff700000 4K Initial CCSRBAR mapping
+ *
+ * This ends up at a TLB0 Index==0 entry, and must not collide
+ * with other TLB0 Entries.
+ */
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_CCSRBAR_DEFAULT, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_CCSRBAR_DEFAULT, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+#else
+#error("Update the number of table entries in tlb1_entry")
+#endif
+
+ /*
+ * TLB0 16K Cacheable, non-guarded
+ * 0xe4010000 16K Temporary Global data for initialization
+ *
+ * Use four 4K TLB0 entries. These entries must be cacheable
+ * as they provide the bootstrap memory before the memory
+ * controler and real memory have been configured.
+ *
+ * These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
+ * and must not collide with other TLB0 entries.
+ */
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, 0)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 4 * 1024, 0)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 4 * 1024, 0,
+ (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 8 * 1024, 0)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 8 * 1024, 0,
+ (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 12 * 1024, 0)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 12 * 1024, 0,
+ (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ /*
+ * TLB 0: 16M Non-cacheable, guarded
+ * 0xff800000 16M TLB for 8MB FLASH
+ * Out of reset this entry is only 4K.
+ */
+ .long FSL_BOOKE_MAS0(1, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)
+ .long FSL_BOOKE_MAS2(CFG_FLASH_BASE, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_FLASH_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ /*
+ * TLB 1: 256M Non-cacheable, guarded
+ * 0x80000000 256M PCI1 MEM First half
+ */
+ .long FSL_BOOKE_MAS0(1, 1, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ /*
+ * TLB 2: 256M Non-cacheable, guarded
+ * 0x90000000 256M PCI1 MEM Second half
+ */
+ .long FSL_BOOKE_MAS0(1, 2, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE + 0x10000000, 0,
+ (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ /*
+ * TLB 3: 256M Cacheable, non-guarded
+ * 0x0 256M DDR SDRAM
+ */
+ #if !defined(CONFIG_SPD_EEPROM)
+ .long FSL_BOOKE_MAS0(1, 3, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_DDR_SDRAM_BASE, 0)
+ .long FSL_BOOKE_MAS3(CFG_DDR_SDRAM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+ #endif
+
+ /*
+ * TLB 4: 64M Non-cacheable, guarded
+ * 0xe0000000 1M CCSRBAR
+ * 0xe2000000 16M PCI1 IO
+ */
+ .long FSL_BOOKE_MAS0(1, 4, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long FSL_BOOKE_MAS2(CFG_CCSRBAR, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_CCSRBAR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ /*
+ * TLB 5: 64M Cacheable, non-guarded
+ * 0xf0000000 64M LBC SDRAM
+ */
+ .long FSL_BOOKE_MAS0(1, 5, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long FSL_BOOKE_MAS2(CFG_LBC_SDRAM_BASE, 0)
+ .long FSL_BOOKE_MAS3(CFG_LBC_SDRAM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ /*
+ * TLB 6: 16M Cacheable, non-guarded
+ * 0xf8000000 1M 7-segment LED display
+ * 0xf8100000 1M User switches
+ * 0xf8300000 1M Board revision
+ * 0xf8b00000 1M EEPROM
+ */
+ .long FSL_BOOKE_MAS0(1, 6, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)
+ .long FSL_BOOKE_MAS2(CFG_EPLD_BASE, 0)
+ .long FSL_BOOKE_MAS3(CFG_EPLD_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ entry_end
+
+/*
+ * LAW(Local Access Window) configuration:
+ *
+ * 0x0000_0000 0x0fff_ffff DDR 256M
+ * 0x8000_0000 0x9fff_ffff PCI1 MEM 512M
+ * 0xe000_0000 0xe000_ffff CCSR 1M
+ * 0xe200_0000 0xe2ff_ffff PCI1 IO 16M
+ * 0xf000_0000 0xf7ff_ffff SDRAM 128M
+ * 0xf8b0_0000 0xf80f_ffff EEPROM 1M
+ * 0xfb80_0000 0xff7f_ffff FLASH (2nd bank) 64M
+ * 0xff80_0000 0xffff_ffff FLASH (boot bank) 8M
+ *
+ * Notes:
+ * CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
+ * If flash is 8M at default position (last 8M), no LAW needed.
+ *
+ * The defines below are 1-off of the actual LAWAR0 usage.
+ * So LAWAR3 define uses the LAWAR4 register in the ECM.
+ */
+
+
+#if !defined(CONFIG_SPD_EEPROM)
+ #define LAWBAR0 ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff)
+ #define LAWAR0 (LAWAR_EN | LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_256M))
+#else
+ #define LAWBAR0 0
+ #define LAWAR0 ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_256M)) & ~LAWAR_EN)
+#endif
+
+#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff)
+#define LAWAR1 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M))
+
+#define LAWBAR2 ((CFG_PCI1_IO_BASE>>12) & 0xfffff)
+#define LAWAR2 (LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_16M))
+
+/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
+#define LAWBAR3 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff)
+#define LAWAR3 (LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M))
+
+ .section .bootpg, "ax"
+ .globl law_entry
+
+law_entry:
+ entry_start
+ .long 4
+ .long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2,LAWBAR3,LAWAR3
+ entry_end
diff --git a/board/sbc8548/sbc8548.c b/board/sbc8548/sbc8548.c
new file mode 100644
index 0000000..5e258f5
--- /dev/null
+++ b/board/sbc8548/sbc8548.c
@@ -0,0 +1,569 @@
+/*
+ * Copyright 2007 Wind River Systemes, Inc. <www.windriver.com>
+ * Copyright 2007 Embedded Specialties, Inc.
+ *
+ * Copyright 2004, 2007 Freescale Semiconductor.
+ *
+ * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <pci.h>
+#include <asm/processor.h>
+#include <asm/immap_85xx.h>
+#include <asm/immap_fsl_pci.h>
+#include <spd.h>
+#include <miiphy.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+extern void ddr_enable_ecc(unsigned int dram_size);
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern long int spd_sdram(void);
+
+void local_bus_init(void);
+void sdram_init(void);
+long int fixed_sdram (void);
+
+int board_early_init_f (void)
+{
+ return 0;
+}
+
+int checkboard (void)
+{
+ volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+ volatile ccsr_local_ecm_t *ecm = (void *)(CFG_MPC85xx_ECM_ADDR);
+
+ printf ("Board: Wind River SBC8548 Rev. 0x%01x\n",
+ (volatile)(*(u_char *)CFG_BD_REV) >> 4);
+
+ /*
+ * Initialize local bus.
+ */
+ local_bus_init ();
+
+ /*
+ * Fix CPU2 errata: A core hang possible while executing a
+ * msync instruction and a snoopable transaction from an I/O
+ * master tagged to make quick forward progress is present.
+ */
+ ecm->eebpcr |= (1 << 16);
+
+ /*
+ * Hack TSEC 3 and 4 IO voltages.
+ */
+ gur->tsec34ioovcr = 0xe7e0; /* 1110 0111 1110 0xxx */
+
+ ecm->eedr = 0xffffffff; /* clear ecm errors */
+ ecm->eeer = 0xffffffff; /* enable ecm errors */
+ return 0;
+}
+
+long int
+initdram(int board_type)
+{
+ long dram_size = 0;
+
+ puts("Initializing\n");
+
+#if defined(CONFIG_DDR_DLL)
+ {
+ /*
+ * Work around to stabilize DDR DLL MSYNC_IN.
+ * Errata DDR9 seems to have been fixed.
+ * This is now the workaround for Errata DDR11:
+ * Override DLL = 1, Course Adj = 1, Tap Select = 0
+ */
+
+ volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+
+ gur->ddrdllcr = 0x81000000;
+ asm("sync;isync;msync");
+ udelay(200);
+ }
+#endif
+
+#if defined(CONFIG_SPD_EEPROM)
+ dram_size = spd_sdram ();
+#else
+ dram_size = fixed_sdram ();
+#endif
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+ /*
+ * Initialize and enable DDR ECC.
+ */
+ ddr_enable_ecc(dram_size);
+#endif
+ /*
+ * SDRAM Initialization
+ */
+ sdram_init();
+
+ puts(" DDR: ");
+ return dram_size;
+}
+
+/*
+ * Initialize Local Bus
+ */
+void
+local_bus_init(void)
+{
+ volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+ volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
+
+ uint clkdiv;
+ uint lbc_hz;
+ sys_info_t sysinfo;
+
+ get_sys_info(&sysinfo);
+ clkdiv = (lbc->lcrr & 0x0f) * 2;
+ lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
+
+ gur->lbiuiplldcr1 = 0x00078080;
+ if (clkdiv == 16) {
+ gur->lbiuiplldcr0 = 0x7c0f1bf0;
+ } else if (clkdiv == 8) {
+ gur->lbiuiplldcr0 = 0x6c0f1bf0;
+ } else if (clkdiv == 4) {
+ gur->lbiuiplldcr0 = 0x5c0f1bf0;
+ }
+
+ lbc->lcrr |= 0x00030000;
+
+ asm("sync;isync;msync");
+
+ lbc->ltesr = 0xffffffff; /* Clear LBC error interrupts */
+ lbc->lteir = 0xffffffff; /* Enable LBC error interrupts */
+}
+
+/*
+ * Initialize SDRAM memory on the Local Bus.
+ */
+void
+sdram_init(void)
+{
+#if defined(CFG_OR3_PRELIM) && defined(CFG_BR3_PRELIM)
+
+ uint idx;
+ volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
+ uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
+ uint lsdmr_common;
+
+ puts(" SDRAM: ");
+
+ print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
+
+ /*
+ * Setup SDRAM Base and Option Registers
+ */
+ lbc->or3 = CFG_OR3_PRELIM;
+ asm("msync");
+
+ lbc->br3 = CFG_BR3_PRELIM;
+ asm("msync");
+
+ lbc->lbcr = CFG_LBC_LBCR;
+ asm("msync");
+
+
+ lbc->lsrt = CFG_LBC_LSRT;
+ lbc->mrtpr = CFG_LBC_MRTPR;
+ asm("msync");
+
+ /*
+ * MPC8548 uses "new" 15-16 style addressing.
+ */
+ lsdmr_common = CFG_LBC_LSDMR_COMMON;
+ lsdmr_common |= CFG_LBC_LSDMR_BSMA1516;
+
+ /*
+ * Issue PRECHARGE ALL command.
+ */
+ lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_PCHALL;
+ asm("sync;msync");
+ *sdram_addr = 0xff;
+ ppcDcbf((unsigned long) sdram_addr);
+ udelay(100);
+
+ /*
+ * Issue 8 AUTO REFRESH commands.
+ */
+ for (idx = 0; idx < 8; idx++) {
+ lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_ARFRSH;
+ asm("sync;msync");
+ *sdram_addr = 0xff;
+ ppcDcbf((unsigned long) sdram_addr);
+ udelay(100);
+ }
+
+ /*
+ * Issue 8 MODE-set command.
+ */
+ lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_MRW;
+ asm("sync;msync");
+ *sdram_addr = 0xff;
+ ppcDcbf((unsigned long) sdram_addr);
+ udelay(100);
+
+ /*
+ * Issue NORMAL OP command.
+ */
+ lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_NORMAL;
+ asm("sync;msync");
+ *sdram_addr = 0xff;
+ ppcDcbf((unsigned long) sdram_addr);
+ udelay(200); /* Overkill. Must wait > 200 bus cycles */
+
+#endif /* enable SDRAM init */
+}
+
+#if defined(CFG_DRAM_TEST)
+int
+testdram(void)
+{
+ uint *pstart = (uint *) CFG_MEMTEST_START;
+ uint *pend = (uint *) CFG_MEMTEST_END;
+ uint *p;
+
+ printf("Testing DRAM from 0x%08x to 0x%08x\n",
+ CFG_MEMTEST_START,
+ CFG_MEMTEST_END);
+
+ printf("DRAM test phase 1:\n");
+ for (p = pstart; p < pend; p++)
+ *p = 0xaaaaaaaa;
+
+ for (p = pstart; p < pend; p++) {
+ if (*p != 0xaaaaaaaa) {
+ printf ("DRAM test fails at: %08x\n", (uint) p);
+ return 1;
+ }
+ }
+
+ printf("DRAM test phase 2:\n");
+ for (p = pstart; p < pend; p++)
+ *p = 0x55555555;
+
+ for (p = pstart; p < pend; p++) {
+ if (*p != 0x55555555) {
+ printf ("DRAM test fails at: %08x\n", (uint) p);
+ return 1;
+ }
+ }
+
+ printf("DRAM test passed.\n");
+ return 0;
+}
+#endif
+
+#if !defined(CONFIG_SPD_EEPROM)
+/*************************************************************************
+ * fixed_sdram init -- doesn't use serial presence detect.
+ * assumes 256MB DDR2 SDRAM SODIMM, without ECC, running at DDR400 speed.
+ ************************************************************************/
+long int fixed_sdram (void)
+{
+ #define CFG_DDR_CONTROL 0xc300c000
+
+ volatile ccsr_ddr_t *ddr = (void *)(CFG_MPC85xx_DDR_ADDR);
+
+ ddr->cs0_bnds = 0x0000007f;
+ ddr->cs1_bnds = 0x008000ff;
+ ddr->cs2_bnds = 0x00000000;
+ ddr->cs3_bnds = 0x00000000;
+ ddr->cs0_config = 0x80010101;
+ ddr->cs1_config = 0x80010101;
+ ddr->cs2_config = 0x00000000;
+ ddr->cs3_config = 0x00000000;
+ ddr->ext_refrec = 0x00000000;
+ ddr->timing_cfg_0 = 0x00220802;
+ ddr->timing_cfg_1 = 0x38377322;
+ ddr->timing_cfg_2 = 0x0fa044C7;
+ ddr->sdram_cfg = 0x4300C000;
+ ddr->sdram_cfg_2 = 0x24401000;
+ ddr->sdram_mode = 0x23C00542;
+ ddr->sdram_mode_2 = 0x00000000;
+ ddr->sdram_interval = 0x05080100;
+ ddr->sdram_md_cntl = 0x00000000;
+ ddr->sdram_data_init = 0x00000000;
+ ddr->sdram_clk_cntl = 0x03800000;
+ asm("sync;isync;msync");
+ udelay(500);
+
+ #if defined (CONFIG_DDR_ECC)
+ /* Enable ECC checking */
+ ddr->sdram_cfg = (CFG_DDR_CONTROL | 0x20000000);
+ #else
+ ddr->sdram_cfg = CFG_DDR_CONTROL;
+ #endif
+
+ return CFG_SDRAM_SIZE * 1024 * 1024;
+}
+#endif
+
+#if defined(CONFIG_PCI) || defined(CONFIG_PCI1)
+/* For some reason the Tundra PCI bridge shows up on itself as a
+ * different device. Work around that by refusing to configure it.
+ */
+void dummy_func(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab) { }
+
+static struct pci_config_table pci_sbc8548_config_table[] = {
+ {0x10e3, 0x0513, PCI_ANY_ID, 1, 3, PCI_ANY_ID, dummy_func, {0,0,0}},
+ {0x1106, 0x0686, PCI_ANY_ID, 1, VIA_ID, 0, mpc85xx_config_via, {0,0,0}},
+ {0x1106, 0x0571, PCI_ANY_ID, 1, VIA_ID, 1,
+ mpc85xx_config_via_usbide, {0,0,0}},
+ {0x1105, 0x3038, PCI_ANY_ID, 1, VIA_ID, 2,
+ mpc85xx_config_via_usb, {0,0,0}},
+ {0x1106, 0x3038, PCI_ANY_ID, 1, VIA_ID, 3,
+ mpc85xx_config_via_usb2, {0,0,0}},
+ {0x1106, 0x3058, PCI_ANY_ID, 1, VIA_ID, 5,
+ mpc85xx_config_via_power, {0,0,0}},
+ {0x1106, 0x3068, PCI_ANY_ID, 1, VIA_ID, 6,
+ mpc85xx_config_via_ac97, {0,0,0}},
+ {},
+};
+
+static struct pci_controller pci1_hose = {
+ config_table: pci_sbc8548_config_table};
+#endif /* CONFIG_PCI */
+
+#ifdef CONFIG_PCI2
+static struct pci_controller pci2_hose;
+#endif /* CONFIG_PCI2 */
+
+#ifdef CONFIG_PCIE1
+static struct pci_controller pcie1_hose;
+#endif /* CONFIG_PCIE1 */
+
+int first_free_busno=0;
+
+void
+pci_init_board(void)
+{
+ volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+
+#ifdef CONFIG_PCI1
+{
+ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR;
+ extern void fsl_pci_init(struct pci_controller *hose);
+ struct pci_controller *hose = &pci1_hose;
+ struct pci_config_table *table;
+
+ uint pci_32 = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32; /* PORDEVSR[15] */
+ uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB; /* PORDEVSR[14] */
+ uint pci_clk_sel = gur->porpllsr & MPC85xx_PORDEVSR_PCI1_SPD; /* PORPLLSR[16] */
+
+ uint pci_agent = (host_agent == 3) || (host_agent == 4 ) || (host_agent == 6);
+
+ uint pci_speed = get_clock_freq (); /* PCI PSPEED in [4:5] */
+
+ if (!(gur->devdisr & MPC85xx_DEVDISR_PCI1)) {
+ printf (" PCI: %d bit, %s MHz, %s, %s, %s\n",
+ (pci_32) ? 32 : 64,
+ (pci_speed == 33333000) ? "33" :
+ (pci_speed == 66666000) ? "66" : "unknown",
+ pci_clk_sel ? "sync" : "async",
+ pci_agent ? "agent" : "host",
+ pci_arb ? "arbiter" : "external-arbiter"
+ );
+
+
+ /* inbound */
+ pci_set_region(hose->regions + 0,
+ CFG_PCI_MEMORY_BUS,
+ CFG_PCI_MEMORY_PHYS,
+ CFG_PCI_MEMORY_SIZE,
+ PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+
+ /* outbound memory */
+ pci_set_region(hose->regions + 1,
+ CFG_PCI1_MEM_BASE,
+ CFG_PCI1_MEM_PHYS,
+ CFG_PCI1_MEM_SIZE,
+ PCI_REGION_MEM);
+
+ /* outbound io */
+ pci_set_region(hose->regions + 2,
+ CFG_PCI1_IO_BASE,
+ CFG_PCI1_IO_PHYS,
+ CFG_PCI1_IO_SIZE,
+ PCI_REGION_IO);
+ hose->region_count = 3;
+
+ /* relocate config table pointers */
+ hose->config_table = \
+ (struct pci_config_table *)((uint)hose->config_table + gd->reloc_off);
+ for (table = hose->config_table; table && table->vendor; table++)
+ table->config_device += gd->reloc_off;
+
+ hose->first_busno=first_free_busno;
+ pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
+
+ fsl_pci_init(hose);
+ first_free_busno=hose->last_busno+1;
+ printf ("PCI on bus %02x - %02x\n",hose->first_busno,hose->last_busno);
+#ifdef CONFIG_PCIX_CHECK
+ if (!(gur->pordevsr & PORDEVSR_PCI)) {
+ /* PCI-X init */
+ if (CONFIG_SYS_CLK_FREQ < 66000000)
+ printf("PCI-X will only work at 66 MHz\n");
+
+ reg16 = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ
+ | PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E;
+ pci_hose_write_config_word(hose, bus, PCIX_COMMAND, reg16);
+ }
+#endif
+ } else {
+ printf (" PCI: disabled\n");
+ }
+}
+#else
+ gur->devdisr |= MPC85xx_DEVDISR_PCI1; /* disable */
+#endif
+
+#ifdef CONFIG_PCI2
+{
+ uint pci2_clk_sel = gur->porpllsr & 0x4000; /* PORPLLSR[17] */
+ uint pci_dual = get_pci_dual (); /* PCI DUAL in CM_PCI[3] */
+ if (pci_dual) {
+ printf (" PCI2: 32 bit, 66 MHz, %s\n",
+ pci2_clk_sel ? "sync" : "async");
+ } else {
+ printf (" PCI2: disabled\n");
+ }
+}
+#else
+ gur->devdisr |= MPC85xx_DEVDISR_PCI2; /* disable */
+#endif /* CONFIG_PCI2 */
+
+#ifdef CONFIG_PCIE1
+{
+ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE1_ADDR;
+ extern void fsl_pci_init(struct pci_controller *hose);
+ struct pci_controller *hose = &pcie1_hose;
+ int pcie_ep = (host_agent == 0) || (host_agent == 2 ) || (host_agent == 3);
+
+ int pcie_configured = io_sel >= 1;
+
+ if (pcie_configured && !(gur->devdisr & MPC85xx_DEVDISR_PCIE)){
+ printf ("\n PCIE connected to slot as %s (base address %x)",
+ pcie_ep ? "End Point" : "Root Complex",
+ (uint)pci);
+
+ if (pci->pme_msg_det) {
+ pci->pme_msg_det = 0xffffffff;
+ debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det);
+ }
+ printf ("\n");
+
+ /* inbound */
+ pci_set_region(hose->regions + 0,
+ CFG_PCI_MEMORY_BUS,
+ CFG_PCI_MEMORY_PHYS,
+ CFG_PCI_MEMORY_SIZE,
+ PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+ /* outbound memory */
+ pci_set_region(hose->regions + 1,
+ CFG_PCIE1_MEM_BASE,
+ CFG_PCIE1_MEM_PHYS,
+ CFG_PCIE1_MEM_SIZE,
+ PCI_REGION_MEM);
+
+ /* outbound io */
+ pci_set_region(hose->regions + 2,
+ CFG_PCIE1_IO_BASE,
+ CFG_PCIE1_IO_PHYS,
+ CFG_PCIE1_IO_SIZE,
+ PCI_REGION_IO);
+
+ hose->region_count = 3;
+
+ hose->first_busno=first_free_busno;
+ pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
+
+ fsl_pci_init(hose);
+ printf ("PCIE on bus %d - %d\n",hose->first_busno,hose->last_busno);
+
+ first_free_busno=hose->last_busno+1;
+
+ } else {
+ printf (" PCIE: disabled\n");
+ }
+ }
+#else
+ gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */
+#endif
+
+}
+
+int last_stage_init(void)
+{
+ return 0;
+}
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+void
+ft_pci_setup(void *blob, bd_t *bd)
+{
+ int node, tmp[2];
+ const char *path;
+
+ node = fdt_path_offset(blob, "/aliases");
+ tmp[0] = 0;
+ if (node >= 0) {
+#ifdef CONFIG_PCI1
+ path = fdt_getprop(blob, node, "pci0", NULL);
+ if (path) {
+ tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno;
+ do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+ }
+#endif
+#ifdef CONFIG_PCIE1
+ path = fdt_getprop(blob, node, "pci1", NULL);
+ if (path) {
+ tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno;
+ do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
+ }
+#endif
+ }
+}
+#endif
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+void
+ft_board_setup(void *blob, bd_t *bd)
+{
+ ft_cpu_setup(blob, bd);
+#ifdef CONFIG_PCI
+ ft_pci_setup(blob, bd);
+#endif
+}
+#endif
+
diff --git a/board/sbc8548/u-boot.lds b/board/sbc8548/u-boot.lds
new file mode 100644
index 0000000..4cd177e
--- /dev/null
+++ b/board/sbc8548/u-boot.lds
@@ -0,0 +1,149 @@
+/*
+ * Copyright 2004, 2007 Freescale Semiconductor.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ .resetvec 0xFFFFFFFC :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ .bootpg 0xFFFFF000 :
+ {
+ cpu/mpc85xx/start.o (.bootpg)
+ board/sbc8548/init.o (.bootpg)
+ } = 0xffff
+
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/mpc85xx/start.o (.text)
+ board/sbc8548/init.o (.text)
+ cpu/mpc85xx/traps.o (.text)
+ cpu/mpc85xx/interrupts.o (.text)
+ cpu/mpc85xx/cpu_init.o (.text)
+ cpu/mpc85xx/cpu.o (.text)
+ drivers/net/tsec.o (.text)
+ cpu/mpc85xx/speed.o (.text)
+ common/dlmalloc.o (.text)
+ lib_generic/crc32.o (.text)
+ lib_ppc/extable.o (.text)
+ lib_generic/zlib.o (.text)
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ *(.eh_frame)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/sbc8560/init.S b/board/sbc8560/init.S
index 3d8d180..95cb85a 100644
--- a/board/sbc8560/init.S
+++ b/board/sbc8560/init.S
@@ -97,69 +97,69 @@ tlb1_entry:
/* TLB for CCSRBAR (IMMR) */
- .long TLB1_MAS0(1,1,0)
- .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_1M)
- .long TLB1_MAS2(((CFG_CCSRBAR>>12) & 0xfffff),0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(((CFG_CCSRBAR>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1,1,0)
+ .long FSL_BOOKE_MAS1(1,1,0,0,BOOKE_PAGESZ_1M)
+ .long FSL_BOOKE_MAS2(CFG_CCSRBAR,(MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_CCSRBAR,0,(MAS3_SX|MAS3_SW|MAS3_SR))
/* TLB for Local Bus stuff, just map the whole 512M */
/* note that the LBC SDRAM is cache-inhibit and guarded, like everything else */
- .long TLB1_MAS0(1,2,0)
- .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(((0xe0000000>>12) & 0xfffff),0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(((0xe0000000>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1,2,0)
+ .long FSL_BOOKE_MAS1(1,1,0,0,BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(0xe0000000,(MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(0xe0000000,0,(MAS3_SX|MAS3_SW|MAS3_SR))
- .long TLB1_MAS0(1,3,0)
- .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(((0xf0000000>>12)&0xfffff),0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(((0xf0000000>>12)&0xfffff),0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1,3,0)
+ .long FSL_BOOKE_MAS1(1,1,0,0,BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(0xf0000000,(MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(0xf0000000,0,(MAS3_SX|MAS3_SW|MAS3_SR))
#if !defined(CONFIG_SPD_EEPROM)
- .long TLB1_MAS0(1,4,0)
- .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(((CFG_DDR_SDRAM_BASE>>12) & 0xfffff),0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(((CFG_DDR_SDRAM_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
-
- .long TLB1_MAS0(1,5,0)
- .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_256M)
- .long TLB1_MAS2((((CFG_DDR_SDRAM_BASE+0x10000000)>>12) & 0xfffff),0,0,0,0,0,0,0,0)
- .long TLB1_MAS3((((CFG_DDR_SDRAM_BASE+0x10000000)>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1,4,0)
+ .long FSL_BOOKE_MAS1(1,1,0,0,BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_DDR_SDRAM_BASE,0)
+ .long FSL_BOOKE_MAS3(CFG_DDR_SDRAM_BASE,0,(MAS3_SX|MAS3_SW|MAS3_SR))
+
+ .long FSL_BOOKE_MAS0(1,5,0)
+ .long FSL_BOOKE_MAS1(1,1,0,0,BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_DDR_SDRAM_BASE+0x10000000,0)
+ .long FSL_BOOKE_MAS3(CFG_DDR_SDRAM_BASE+0x10000000,0,(MAS3_SX|MAS3_SW|MAS3_SR))
#else
- .long TLB1_MAS0(1,4,0)
- .long TLB1_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
- .long TLB1_MAS2(0,0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(0,0,0,0,0,0,1,0,1,0,1)
-
- .long TLB1_MAS0(1,5,0)
- .long TLB1_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
- .long TLB1_MAS2(0,0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(0,0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1,4,0)
+ .long FSL_BOOKE_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
+ .long FSL_BOOKE_MAS2(0,0)
+ .long FSL_BOOKE_MAS3(0,0,(MAS3_SX|MAS3_SW|MAS3_SR))
+
+ .long FSL_BOOKE_MAS0(1,5,0)
+ .long FSL_BOOKE_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
+ .long FSL_BOOKE_MAS2(0,0)
+ .long FSL_BOOKE_MAS3(0,0,(MAS3_SX|MAS3_SW|MAS3_SR))
#endif
- .long TLB1_MAS0(1,6,0)
- .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_16K)
+ .long FSL_BOOKE_MAS0(1,6,0)
+ .long FSL_BOOKE_MAS1(1,1,0,0,BOOKE_PAGESZ_16K)
#ifdef CONFIG_L2_INIT_RAM
- .long TLB1_MAS2(((CFG_INIT_RAM_ADDR>>12) & 0xfffff),0,0,0,1,0,0,0,0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR,0,0,0,1,0,0,0,0)
#else
- .long TLB1_MAS2(((CFG_INIT_RAM_ADDR>>12) & 0xfffff),0,0,0,0,0,0,0,0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR,0)
#endif
- .long TLB1_MAS3(((CFG_INIT_RAM_ADDR>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR,0,(MAS3_SX|MAS3_SW|MAS3_SR))
- .long TLB1_MAS0(1,7,0)
- .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(((CFG_PCI_MEM_BASE>>12) & 0xfffff),0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(((CFG_PCI_MEM_BASE>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1,7,0)
+ .long FSL_BOOKE_MAS1(1,1,0,0,BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_PCI_MEM_BASE,(MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_PCI_MEM_BASE,0,(MAS3_SX|MAS3_SW|MAS3_SR))
#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
- .long TLB1_MAS0(1,15,0)
- .long TLB1_MAS1(1,1,0,0,BOOKE_PAGESZ_1M)
- .long TLB1_MAS2(((CFG_CCSRBAR_DEFAULT>>12) & 0xfffff),0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(((CFG_CCSRBAR_DEFAULT>>12) & 0xfffff),0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1,15,0)
+ .long FSL_BOOKE_MAS1(1,1,0,0,BOOKE_PAGESZ_1M)
+ .long FSL_BOOKE_MAS2(CFG_CCSRBAR_DEFAULT,(MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_CCSRBAR_DEFAULT,0,(MAS3_SX|MAS3_SW|MAS3_SR))
#else
- .long TLB1_MAS0(1,15,0)
- .long TLB1_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
- .long TLB1_MAS2(0,0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(0,0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1,15,0)
+ .long FSL_BOOKE_MAS1(0,0,0,0,BOOKE_PAGESZ_1M)
+ .long FSL_BOOKE_MAS2(0,0)
+ .long FSL_BOOKE_MAS3(0,0,(MAS3_SX|MAS3_SW|MAS3_SR))
#endif
entry_end
diff --git a/board/stxgp3/init.S b/board/stxgp3/init.S
index d504289..f491a57 100644
--- a/board/stxgp3/init.S
+++ b/board/stxgp3/init.S
@@ -49,7 +49,7 @@
*
* MAS0: tlbsel, esel, nv
* MAS1: valid, iprot, tid, ts, tsize
- * MAS2: epn, sharen, x0, x1, w, i, m, g, e
+ * MAS2: epn, x0, x1, w, i, m, g, e
* MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
*/
@@ -81,10 +81,10 @@ tlb1_entry:
* This ends up at a TLB0 Index==0 entry, and must not collide
* with other TLB0 Entries.
*/
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_CCSRBAR_DEFAULT, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_CCSRBAR_DEFAULT, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
#else
#error("Update the number of table entries in tlb1_entry")
#endif
@@ -100,33 +100,25 @@ tlb1_entry:
* These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
* and must not collide with other TLB0 entries.
*/
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR), \
- 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR), \
- 0,0,0,0,0,1,0,1,0,1)
-
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 4 * 1024), \
- 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 4 * 1024), \
- 0,0,0,0,0,1,0,1,0,1)
-
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 8 * 1024), \
- 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 8 * 1024), \
- 0,0,0,0,0,1,0,1,0,1)
-
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 12 * 1024), \
- 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 12 * 1024), \
- 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, 0)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 4 * 1024, 0)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 4 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 8 * 1024, 0)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 8 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 12 * 1024, 0)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 12 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
@@ -134,78 +126,74 @@ tlb1_entry:
* 0xff000000 16M FLASH
* Out of reset this entry is only 4K.
*/
- .long TLB1_MAS0(1, 0, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_FLASH_BASE), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_FLASH_BASE), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)
+ .long FSL_BOOKE_MAS2(CFG_FLASH_BASE, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_FLASH_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 1: 256M Non-cacheable, guarded
* 0x80000000 256M PCI1 MEM First half
*/
- .long TLB1_MAS0(1, 1, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 1, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 2: 256M Non-cacheable, guarded
* 0x90000000 256M PCI1 MEM Second half
*/
- .long TLB1_MAS0(1, 2, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE + 0x10000000), \
- 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE + 0x10000000), \
- 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 2, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 3: 256M Non-cacheable, guarded
* 0xc0000000 256M Rapid IO MEM First half
*/
- .long TLB1_MAS0(1, 3, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_RIO_MEM_BASE), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_RIO_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 3, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_RIO_MEM_BASE, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_RIO_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 4: 256M Non-cacheable, guarded
* 0xd0000000 256M Rapid IO MEM Second half
*/
- .long TLB1_MAS0(1, 4, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_RIO_MEM_BASE + 0x10000000), \
- 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_RIO_MEM_BASE + 0x10000000), \
- 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 4, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_RIO_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_RIO_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 5: 64M Non-cacheable, guarded
* 0xe000_0000 1M CCSRBAR
* 0xe200_0000 16M PCI1 IO
*/
- .long TLB1_MAS0(1, 5, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 5, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long FSL_BOOKE_MAS2(CFG_CCSRBAR, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_CCSRBAR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 6: 64M Cacheable, non-guarded
* 0xf000_0000 64M LBC SDRAM
*/
- .long TLB1_MAS0(1, 6, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 6, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long FSL_BOOKE_MAS2(CFG_LBC_SDRAM_BASE, 0)
+ .long FSL_BOOKE_MAS3(CFG_LBC_SDRAM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 7: 16K Non-cacheable, guarded
* 0xfc000000 16K Configuration Latch register
*/
- .long TLB1_MAS0(1, 7, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64K)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_LBC_LCLDEVS_BASE), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_LBC_LCLDEVS_BASE), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 7, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64K)
+ .long FSL_BOOKE_MAS2(CFG_LBC_LCLDEVS_BASE, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_LBC_LCLDEVS_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
#if !defined(CONFIG_SPD_EEPROM)
/*
@@ -217,17 +205,15 @@ tlb1_entry:
* Likely it needs to be increased by two for these entries.
*/
#error("Update the number of table entries in tlb1_entry")
- .long TLB1_MAS0(1, 8, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_DDR_SDRAM_BASE), 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_DDR_SDRAM_BASE), 0,0,0,0,0,1,0,1,0,1)
-
- .long TLB1_MAS0(1, 9, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_DDR_SDRAM_BASE + 0x4000000),
- 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_DDR_SDRAM_BASE + 0x4000000),
- 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 8, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long FSL_BOOKE_MAS2(CFG_DDR_SDRAM_BASE, 0)
+ .long FSL_BOOKE_MAS3(CFG_DDR_SDRAM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ .long FSL_BOOKE_MAS0(1, 9, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long FSL_BOOKE_MAS2(CFG_DDR_SDRAM_BASE + 0x4000000, 0)
+ .long FSL_BOOKE_MAS3(CFG_DDR_SDRAM_BASE + 0x4000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
#endif
entry_end
diff --git a/board/stxssa/init.S b/board/stxssa/init.S
index a1a8d9e..82dafb8 100644
--- a/board/stxssa/init.S
+++ b/board/stxssa/init.S
@@ -49,7 +49,7 @@
*
* MAS0: tlbsel, esel, nv
* MAS1: valid, iprot, tid, ts, tsize
- * MAS2: epn, sharen, x0, x1, w, i, m, g, e
+ * MAS2: epn, x0, x1, w, i, m, g, e
* MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
*/
@@ -81,10 +81,10 @@ tlb1_entry:
* This ends up at a TLB0 Index==0 entry, and must not collide
* with other TLB0 Entries.
*/
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_CCSRBAR_DEFAULT, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_CCSRBAR_DEFAULT, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
#else
#error("Update the number of table entries in tlb1_entry")
#endif
@@ -100,33 +100,25 @@ tlb1_entry:
* These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
* and must not collide with other TLB0 entries.
*/
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR), \
- 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR), \
- 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, 0)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 4 * 1024), \
- 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 4 * 1024), \
- 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 4 * 1024, 0)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 4 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 8 * 1024), \
- 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 8 * 1024), \
- 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 8 * 1024, 0)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 8 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 12 * 1024), \
- 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 12 * 1024), \
- 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 12 * 1024, 0)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 12 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
@@ -134,50 +126,46 @@ tlb1_entry:
* 0xfc000000 6M4 FLASH
* Out of reset this entry is only 4K.
*/
- .long TLB1_MAS0(1, 0, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_FLASH_BASE), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_FLASH_BASE), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long FSL_BOOKE_MAS2(CFG_FLASH_BASE, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_FLASH_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 1: 256M Non-cacheable, guarded
* 0x80000000 256M PCI1 MEM First half
*/
- .long TLB1_MAS0(1, 1, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 1, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 2: 256M Non-cacheable, guarded
* 0x90000000 256M PCI1 MEM Second half
*/
- .long TLB1_MAS0(1, 2, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE + 0x10000000), \
- 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE + 0x10000000), \
- 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 2, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 3: 256M Non-cacheable, guarded
* 0xa0000000 256M PCI2 MEM First half
*/
- .long TLB1_MAS0(1, 3, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI2_MEM_BASE), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI2_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 3, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_PCI2_MEM_BASE, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_PCI2_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 4: 256M Non-cacheable, guarded
* 0xb0000000 256M PCI2 MEM Second half
*/
- .long TLB1_MAS0(1, 4, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI2_MEM_BASE + 0x10000000), \
- 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI2_MEM_BASE + 0x10000000), \
- 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 4, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_PCI2_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_PCI2_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 5: 64M Non-cacheable, guarded
@@ -185,10 +173,10 @@ tlb1_entry:
* 0xe200_0000 16M PCI1 IO
* 0xe300_0000 16M PCI2 IO
*/
- .long TLB1_MAS0(1, 5, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 5, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long FSL_BOOKE_MAS2(CFG_CCSRBAR, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_CCSRBAR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 6: 256M Non-cacheable, guarded
@@ -196,10 +184,10 @@ tlb1_entry:
* 0xfb000000 Configuration Latch register (one word)
* 0xfc000000 Up to 64M flash
*/
- .long TLB1_MAS0(1, 7, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_LBC_OPTION_BASE), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_LBC_OPTION_BASE), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 7, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_LBC_OPTION_BASE, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_LBC_OPTION_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
entry_end
/*
diff --git a/board/tqm85xx/init.S b/board/tqm85xx/init.S
index 1f61038..dcb9386 100644
--- a/board/tqm85xx/init.S
+++ b/board/tqm85xx/init.S
@@ -43,7 +43,7 @@
*
* MAS0: tlbsel, esel, nv
* MAS1: valid, iprot, tid, ts, tsize
- * MAS2: epn, sharen, x0, x1, w, i, m, g, e
+ * MAS2: epn, x0, x1, w, i, m, g, e
* MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
*/
@@ -78,33 +78,25 @@ tlb1_entry:
* These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
* and must not collide with other TLB0 entries.
*/
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR),
- 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR),
- 0,0,0,0,0,1,0,1,0,1)
-
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 4 * 1024),
- 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 4 * 1024),
- 0,0,0,0,0,1,0,1,0,1)
-
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 8 * 1024),
- 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 8 * 1024),
- 0,0,0,0,0,1,0,1,0,1)
-
- .long TLB1_MAS0(0, 0, 0)
- .long TLB1_MAS1(1, 0, 0, 0, 0)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 12 * 1024),
- 0,0,0,0,0,0,0,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 12 * 1024),
- 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR, 0)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 4 * 1024, 0)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 4 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 8 * 1024, 0)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 8 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+
+ .long FSL_BOOKE_MAS0(0, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 0, 0, 0, 0)
+ .long FSL_BOOKE_MAS2(CFG_INIT_RAM_ADDR + 12 * 1024, 0)
+ .long FSL_BOOKE_MAS3(CFG_INIT_RAM_ADDR + 12 * 1024, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
@@ -112,64 +104,60 @@ tlb1_entry:
* 0xf8000000 128M FLASH
* Out of reset this entry is only 4K.
*/
- .long TLB1_MAS0(1, 1, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_FLASH_BASE), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_FLASH_BASE), 0,0,0,0,0,1,0,1,0,1)
- .long TLB1_MAS0(1, 0, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_FLASH_BASE+0x4000000), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_FLASH_BASE+0x4000000), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 1, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long FSL_BOOKE_MAS2(CFG_FLASH_BASE, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_FLASH_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+ .long FSL_BOOKE_MAS0(1, 0, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long FSL_BOOKE_MAS2(CFG_FLASH_BASE+0x4000000, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_FLASH_BASE+0x4000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 2: 256M Non-cacheable, guarded
* 0x80000000 256M PCI1 MEM First half
*/
- .long TLB1_MAS0(1, 2, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 2, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 3: 256M Non-cacheable, guarded
* 0x90000000 256M PCI1 MEM Second half
*/
- .long TLB1_MAS0(1, 3, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE + 0x10000000),
- 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE + 0x10000000),
- 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 3, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_PCI1_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_PCI1_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 4: 256M Non-cacheable, guarded
* 0xc0000000 256M Rapid IO MEM First half
*/
- .long TLB1_MAS0(1, 4, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_RIO_MEM_BASE), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_RIO_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 4, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_RIO_MEM_BASE, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_RIO_MEM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 5: 256M Non-cacheable, guarded
* 0xd0000000 256M Rapid IO MEM Second half
*/
- .long TLB1_MAS0(1, 5, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_RIO_MEM_BASE + 0x10000000),
- 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_RIO_MEM_BASE + 0x10000000),
- 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 5, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_RIO_MEM_BASE + 0x10000000, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_RIO_MEM_BASE + 0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 6: 64M Non-cacheable, guarded
* 0xe000_0000 1M CCSRBAR
* 0xe200_0000 16M PCI1 IO
*/
- .long TLB1_MAS0(1, 6, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 6, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+ .long FSL_BOOKE_MAS2(CFG_CCSRBAR, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_CCSRBAR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
/*
* TLB 7+8: 512M DDR, cache disabled (needed for memory test)
@@ -178,14 +166,14 @@ tlb1_entry:
* Make sure the TLB count at the top of this table is correct.
* Likely it needs to be increased by two for these entries.
*/
- .long TLB1_MAS0(1, 7, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_DDR_SDRAM_BASE), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_DDR_SDRAM_BASE), 0,0,0,0,0,1,0,1,0,1)
- .long TLB1_MAS0(1, 8, 0)
- .long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
- .long TLB1_MAS2(E500_TLB_EPN(CFG_DDR_SDRAM_BASE+0x10000000), 0,0,0,0,1,0,1,0)
- .long TLB1_MAS3(E500_TLB_RPN(CFG_DDR_SDRAM_BASE+0x10000000), 0,0,0,0,0,1,0,1,0,1)
+ .long FSL_BOOKE_MAS0(1, 7, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_DDR_SDRAM_BASE, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_DDR_SDRAM_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
+ .long FSL_BOOKE_MAS0(1, 8, 0)
+ .long FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+ .long FSL_BOOKE_MAS2(CFG_DDR_SDRAM_BASE+0x10000000, (MAS2_I|MAS2_G))
+ .long FSL_BOOKE_MAS3(CFG_DDR_SDRAM_BASE+0x10000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))
entry_end
diff --git a/common/fdt_support.c b/common/fdt_support.c
index 92f1c7f..a13c140 100644
--- a/common/fdt_support.c
+++ b/common/fdt_support.c
@@ -30,6 +30,9 @@
#include <fdt_support.h>
#include <exports.h>
+#ifdef CONFIG_QE
+#include "../drivers/qe/qe.h"
+#endif
/*
* Global data (for the gd->bd)
*/
@@ -614,4 +617,49 @@ void fdt_fixup_ethernet(void *fdt, bd_t *bd)
#endif
}
}
+
+#ifdef CONFIG_QE
+/*
+ * If a QE firmware has been uploaded, then add the 'firmware' node under
+ * the 'qe' node.
+ */
+void fdt_fixup_qe_firmware(void *fdt)
+{
+ struct qe_firmware_info *qe_fw_info;
+ int node, ret;
+
+ qe_fw_info = qe_get_firmware_info();
+ if (!qe_fw_info)
+ return;
+
+ node = fdt_path_offset(fdt, "/qe");
+ if (node < 0)
+ return;
+
+ /* We assume the node doesn't exist yet */
+ node = fdt_add_subnode(fdt, node, "firmware");
+ if (node < 0)
+ return;
+
+ ret = fdt_setprop(fdt, node, "extended-modes",
+ &qe_fw_info->extended_modes, sizeof(u64));
+ if (ret < 0)
+ goto error;
+
+ ret = fdt_setprop_string(fdt, node, "id", qe_fw_info->id);
+ if (ret < 0)
+ goto error;
+
+ ret = fdt_setprop(fdt, node, "virtual-traps", qe_fw_info->vtraps,
+ sizeof(qe_fw_info->vtraps));
+ if (ret < 0)
+ goto error;
+
+ return;
+
+error:
+ fdt_del_node(fdt, node);
+}
+#endif
+
#endif
diff --git a/cpu/mpc85xx/fdt.c b/cpu/mpc85xx/fdt.c
index 737a6c4..0ce17e7 100644
--- a/cpu/mpc85xx/fdt.c
+++ b/cpu/mpc85xx/fdt.c
@@ -43,8 +43,11 @@ void ft_cpu_setup(void *blob, bd_t *bd)
do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
"bus-frequency", bd->bi_busfreq, 1);
#ifdef CONFIG_QE
- do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
+ do_fixup_by_prop_u32(blob, "device_type", "qe", 4,
"bus-frequency", bd->bi_busfreq, 1);
+ do_fixup_by_prop_u32(blob, "device_type", "qe", 4,
+ "brg-frequency", bd->bi_busfreq / 2, 1);
+ fdt_fixup_qe_firmware(blob);
#endif
#ifdef CFG_NS16550
diff --git a/cpu/mpc85xx/spd_sdram.c b/cpu/mpc85xx/spd_sdram.c
index 553f736..adc9c4d 100644
--- a/cpu/mpc85xx/spd_sdram.c
+++ b/cpu/mpc85xx/spd_sdram.c
@@ -1071,22 +1071,19 @@ setup_laws_and_tlbs(unsigned int memsize)
ram_tlb_address = (unsigned int)CFG_DDR_SDRAM_BASE;
while (ram_tlb_address < (memsize * 1024 * 1024)
&& ram_tlb_index < 16) {
- mtspr(MAS0, TLB1_MAS0(1, ram_tlb_index, 0));
- mtspr(MAS1, TLB1_MAS1(1, 1, 0, 0, tlb_size));
- mtspr(MAS2, TLB1_MAS2(E500_TLB_EPN(ram_tlb_address),
- 0, 0, 0, 0, 0, 0, 0, 0));
- mtspr(MAS3, TLB1_MAS3(E500_TLB_RPN(ram_tlb_address),
- 0, 0, 0, 0, 0, 1, 0, 1, 0, 1));
+ mtspr(MAS0, FSL_BOOKE_MAS0(1, ram_tlb_index, 0));
+ mtspr(MAS1, FSL_BOOKE_MAS1(1, 1, 0, 0, tlb_size));
+ mtspr(MAS2, FSL_BOOKE_MAS2(ram_tlb_address, 0));
+ mtspr(MAS3, FSL_BOOKE_MAS3(ram_tlb_address, 0,
+ (MAS3_SX|MAS3_SW|MAS3_SR)));
asm volatile("isync;msync;tlbwe;isync");
- debug("DDR: MAS0=0x%08x\n", TLB1_MAS0(1, ram_tlb_index, 0));
- debug("DDR: MAS1=0x%08x\n", TLB1_MAS1(1, 1, 0, 0, tlb_size));
- debug("DDR: MAS2=0x%08x\n",
- TLB1_MAS2(E500_TLB_EPN(ram_tlb_address),
- 0, 0, 0, 0, 0, 0, 0, 0));
+ debug("DDR: MAS0=0x%08x\n", FSL_BOOKE_MAS0(1, ram_tlb_index, 0));
+ debug("DDR: MAS1=0x%08x\n", FSL_BOOKE_MAS1(1, 1, 0, 0, tlb_size));
+ debug("DDR: MAS2=0x%08x\n", FSL_BOOKE_MAS2(ram_tlb_address, 0));
debug("DDR: MAS3=0x%08x\n",
- TLB1_MAS3(E500_TLB_RPN(ram_tlb_address),
- 0, 0, 0, 0, 0, 1, 0, 1, 0, 1));
+ FSL_BOOKE_MAS3(ram_tlb_address, 0,
+ (MAS3_SX|MAS3_SW|MAS3_SR)));
ram_tlb_address += (0x1000 << ((tlb_size - 1) * 2));
ram_tlb_index++;
diff --git a/cpu/mpc85xx/start.S b/cpu/mpc85xx/start.S
index b769ef8..b489d2f 100644
--- a/cpu/mpc85xx/start.S
+++ b/cpu/mpc85xx/start.S
@@ -268,7 +268,10 @@ _start_e500:
*/
lis r3,CFG_INIT_RAM_ADDR@h
ori r3,r3,CFG_INIT_RAM_ADDR@l
- li r2,(CFG_DCACHE_SIZE / (2 * CFG_CACHELINE_SIZE))
+ mfspr r2, L1CFG0
+ andi. r2, r2, 0x1ff
+ /* cache size * 1024 / (2 * L1 line size) */
+ slwi r2, r2, (10 - 1 - L1_CACHE_SHIFT)
mtctr r2
li r0,0
1:
@@ -1061,7 +1064,9 @@ unlock_ram_in_cache:
/* invalidate the INIT_RAM section */
lis r3,(CFG_INIT_RAM_ADDR & ~31)@h
ori r3,r3,(CFG_INIT_RAM_ADDR & ~31)@l
- li r4,(CFG_DCACHE_SIZE / (2 * CFG_CACHELINE_SIZE))
+ mfspr r4,L1CFG0
+ andi. r4,r4,0x1ff
+ slwi r4,r4,(10 - 1 - L1_CACHE_SHIFT)
mtctr r4
1: icbi r0,r3
dcbi r0,r3
diff --git a/doc/README.atum8548 b/doc/README.atum8548
new file mode 100644
index 0000000..4eb56ba
--- /dev/null
+++ b/doc/README.atum8548
@@ -0,0 +1,29 @@
+Building U-Boot
+---------------
+
+The ATUM8548 code is known to build using ELDK 4.1.
+
+$ make ATUM8548_config
+Configuring for ATUM8548 board...
+$ make
+
+Using Flash
+-----------
+
+The ATUM8548 board has one flash bank, of 128MB in size (2^23 = 0x08000000).
+
+The BDI2000 commands for copying u-boot into flash are
+as follows:
+
+ erase 0xFFF80000 0x4000 0x20
+ prog 0xfff80000 uboot.bin bin
+
+Booting Linux
+-------------
+
+U-boot/kermit commands for booting linux via NFS - assumming the proper
+bootargs are set - are as follows:
+
+ tftp 1000000 uImage.atum
+ tftp c00000 mpc8548atum.dtb
+ bootm 1000000 - c00000
diff --git a/doc/README.sbc8548 b/doc/README.sbc8548
new file mode 100644
index 0000000..b34d040
--- /dev/null
+++ b/doc/README.sbc8548
@@ -0,0 +1,27 @@
+Wind River SBC8548 reference board
+===========================
+
+Copyright 2007, Embedded Specialties, Inc.
+Copyright 2007 Wind River Systemes, Inc.
+-----------------------------
+
+1. Building U-Boot
+------------------
+The SBC8548 code is known to build using ELDK 4.1.
+
+ $ make sbc8548_config
+ Configuring for sbc8548 board...
+
+ $ make
+
+
+2. Switch and Jumper Settings
+-----------------------------
+All Jumpers & Switches are in their default positions. Please refer to
+the board documentation for details. Some settings control CPU voltages
+and settings may change with board revisions.
+
+3. Known limitations
+--------------------
+PCI:
+ The code to support PCI is currently disabled and has not been verified.
diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c
index 7559e92..276788c 100644
--- a/drivers/qe/qe.c
+++ b/drivers/qe/qe.c
@@ -21,6 +21,7 @@
*/
#include "common.h"
+#include <command.h>
#include "asm/errno.h"
#include "asm/io.h"
#include "asm/immap_qe.h"
@@ -248,4 +249,222 @@ int qe_set_mii_clk_src(int ucc_num)
return 0;
}
+/* The maximum number of RISCs we support */
+#define MAX_QE_RISC 2
+
+/* Firmware information stored here for qe_get_firmware_info() */
+static struct qe_firmware_info qe_firmware_info;
+
+/*
+ * Set to 1 if QE firmware has been uploaded, and therefore
+ * qe_firmware_info contains valid data.
+ */
+static int qe_firmware_uploaded;
+
+/*
+ * Upload a QE microcode
+ *
+ * This function is a worker function for qe_upload_firmware(). It does
+ * the actual uploading of the microcode.
+ */
+static void qe_upload_microcode(const void *base,
+ const struct qe_microcode *ucode)
+{
+ const u32 *code = base + be32_to_cpu(ucode->code_offset);
+ unsigned int i;
+
+ if (ucode->major || ucode->minor || ucode->revision)
+ printf("QE: uploading microcode '%s' version %u.%u.%u\n",
+ ucode->id, ucode->major, ucode->minor, ucode->revision);
+ else
+ printf("QE: uploading microcode '%s'\n", ucode->id);
+
+ /* Use auto-increment */
+ out_be32(&qe_immr->iram.iadd, be32_to_cpu(ucode->iram_offset) |
+ QE_IRAM_IADD_AIE | QE_IRAM_IADD_BADDR);
+
+ for (i = 0; i < be32_to_cpu(ucode->count); i++)
+ out_be32(&qe_immr->iram.idata, be32_to_cpu(code[i]));
+}
+
+/*
+ * Upload a microcode to the I-RAM at a specific address.
+ *
+ * See docs/README.qe_firmware for information on QE microcode uploading.
+ *
+ * Currently, only version 1 is supported, so the 'version' field must be
+ * set to 1.
+ *
+ * The SOC model and revision are not validated, they are only displayed for
+ * informational purposes.
+ *
+ * 'calc_size' is the calculated size, in bytes, of the firmware structure and
+ * all of the microcode structures, minus the CRC.
+ *
+ * 'length' is the size that the structure says it is, including the CRC.
+ */
+int qe_upload_firmware(const struct qe_firmware *firmware)
+{
+ unsigned int i;
+ unsigned int j;
+ u32 crc;
+ size_t calc_size = sizeof(struct qe_firmware);
+ size_t length;
+ const struct qe_header *hdr;
+
+ if (!firmware) {
+ printf("Invalid address\n");
+ return -EINVAL;
+ }
+
+ hdr = &firmware->header;
+ length = be32_to_cpu(hdr->length);
+
+ /* Check the magic */
+ if ((hdr->magic[0] != 'Q') || (hdr->magic[1] != 'E') ||
+ (hdr->magic[2] != 'F')) {
+ printf("Not a microcode\n");
+ return -EPERM;
+ }
+
+ /* Check the version */
+ if (hdr->version != 1) {
+ printf("Unsupported version\n");
+ return -EPERM;
+ }
+
+ /* Validate some of the fields */
+ if ((firmware->count < 1) || (firmware->count >= MAX_QE_RISC)) {
+ printf("Invalid data\n");
+ return -EINVAL;
+ }
+
+ /* Validate the length and check if there's a CRC */
+ calc_size += (firmware->count - 1) * sizeof(struct qe_microcode);
+
+ for (i = 0; i < firmware->count; i++)
+ /*
+ * For situations where the second RISC uses the same microcode
+ * as the first, the 'code_offset' and 'count' fields will be
+ * zero, so it's okay to add those.
+ */
+ calc_size += sizeof(u32) *
+ be32_to_cpu(firmware->microcode[i].count);
+
+ /* Validate the length */
+ if (length != calc_size + sizeof(u32)) {
+ printf("Invalid length\n");
+ return -EPERM;
+ }
+
+ /*
+ * Validate the CRC. We would normally call crc32_no_comp(), but that
+ * function isn't available unless you turn on JFFS support.
+ */
+ crc = be32_to_cpu(*(u32 *)((void *)firmware + calc_size));
+ if (crc != (crc32(-1, (const void *) firmware, calc_size) ^ -1)) {
+ printf("Firmware CRC is invalid\n");
+ return -EIO;
+ }
+
+ /*
+ * If the microcode calls for it, split the I-RAM.
+ */
+ if (!firmware->split) {
+ out_be16(&qe_immr->cp.cercr,
+ in_be16(&qe_immr->cp.cercr) | QE_CP_CERCR_CIR);
+ }
+
+ if (firmware->soc.model)
+ printf("Firmware '%s' for %u V%u.%u\n",
+ firmware->id, be16_to_cpu(firmware->soc.model),
+ firmware->soc.major, firmware->soc.minor);
+ else
+ printf("Firmware '%s'\n", firmware->id);
+
+ /*
+ * The QE only supports one microcode per RISC, so clear out all the
+ * saved microcode information and put in the new.
+ */
+ memset(&qe_firmware_info, 0, sizeof(qe_firmware_info));
+ strcpy(qe_firmware_info.id, firmware->id);
+ qe_firmware_info.extended_modes = firmware->extended_modes;
+ memcpy(qe_firmware_info.vtraps, firmware->vtraps,
+ sizeof(firmware->vtraps));
+ qe_firmware_uploaded = 1;
+
+ /* Loop through each microcode. */
+ for (i = 0; i < firmware->count; i++) {
+ const struct qe_microcode *ucode = &firmware->microcode[i];
+
+ /* Upload a microcode if it's present */
+ if (ucode->code_offset)
+ qe_upload_microcode(firmware, ucode);
+
+ /* Program the traps for this processor */
+ for (j = 0; j < 16; j++) {
+ u32 trap = be32_to_cpu(ucode->traps[j]);
+
+ if (trap)
+ out_be32(&qe_immr->rsp[i].tibcr[j], trap);
+ }
+
+ /* Enable traps */
+ out_be32(&qe_immr->rsp[i].eccr, be32_to_cpu(ucode->eccr));
+ }
+
+ return 0;
+}
+
+struct qe_firmware_info *qe_get_firmware_info(void)
+{
+ return qe_firmware_uploaded ? &qe_firmware_info : NULL;
+}
+
+static int qe_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ ulong addr;
+
+ if (argc < 3) {
+ printf ("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+ }
+
+ if (strcmp(argv[1], "fw") == 0) {
+ addr = simple_strtoul(argv[2], NULL, 16);
+
+ if (!addr) {
+ printf("Invalid address\n");
+ return -EINVAL;
+ }
+
+ /*
+ * If a length was supplied, compare that with the 'length'
+ * field.
+ */
+
+ if (argc > 3) {
+ ulong length = simple_strtoul(argv[3], NULL, 16);
+ struct qe_firmware *firmware = (void *) addr;
+
+ if (length != be32_to_cpu(firmware->header.length)) {
+ printf("Length mismatch\n");
+ return -EINVAL;
+ }
+ }
+
+ return qe_upload_firmware((const struct qe_firmware *) addr);
+ }
+
+ printf ("Usage:\n%s\n", cmdtp->usage);
+ return 1;
+}
+
+U_BOOT_CMD(
+ qe, 4, 0, qe_cmd,
+ "qe - QUICC Engine commands\n",
+ "fw <addr> [<length>] - Upload firmware binary at address <addr> to "
+ "the QE,\n\twith optional length <length> verification.\n"
+ );
+
#endif /* CONFIG_QE */
diff --git a/drivers/qe/qe.h b/drivers/qe/qe.h
index 400b1a6..4c96c67 100644
--- a/drivers/qe/qe.h
+++ b/drivers/qe/qe.h
@@ -222,6 +222,60 @@ typedef enum qe_clock {
#define QE_SDEBCR_BA_MASK 0x01FFFFFF
+/* Communication Processor */
+#define QE_CP_CERCR_MEE 0x8000 /* Multi-user RAM ECC enable */
+#define QE_CP_CERCR_IEE 0x4000 /* Instruction RAM ECC enable */
+#define QE_CP_CERCR_CIR 0x0800 /* Common instruction RAM */
+
+/* I-RAM */
+#define QE_IRAM_IADD_AIE 0x80000000 /* Auto Increment Enable */
+#define QE_IRAM_IADD_BADDR 0x00080000 /* Base Address */
+
+/* Structure that defines QE firmware binary files.
+ *
+ * See doc/README.qe_firmware for a description of these fields.
+ */
+struct qe_firmware {
+ struct qe_header {
+ u32 length; /* Length of the entire structure, in bytes */
+ u8 magic[3]; /* Set to { 'Q', 'E', 'F' } */
+ u8 version; /* Version of this layout. First ver is '1' */
+ } header;
+ u8 id[62]; /* Null-terminated identifier string */
+ u8 split; /* 0 = shared I-RAM, 1 = split I-RAM */
+ u8 count; /* Number of microcode[] structures */
+ struct {
+ u16 model; /* The SOC model */
+ u8 major; /* The SOC revision major */
+ u8 minor; /* The SOC revision minor */
+ } __attribute__ ((packed)) soc;
+ u8 padding[4]; /* Reserved, for alignment */
+ u64 extended_modes; /* Extended modes */
+ u32 vtraps[8]; /* Virtual trap addresses */
+ u8 reserved[4]; /* Reserved, for future expansion */
+ struct qe_microcode {
+ u8 id[32]; /* Null-terminated identifier */
+ u32 traps[16]; /* Trap addresses, 0 == ignore */
+ u32 eccr; /* The value for the ECCR register */
+ u32 iram_offset; /* Offset into I-RAM for the code */
+ u32 count; /* Number of 32-bit words of the code */
+ u32 code_offset; /* Offset of the actual microcode */
+ u8 major; /* The microcode version major */
+ u8 minor; /* The microcode version minor */
+ u8 revision; /* The microcode version revision */
+ u8 padding; /* Reserved, for alignment */
+ u8 reserved[4]; /* Reserved, for future expansion */
+ } __attribute__ ((packed)) microcode[1];
+ /* All microcode binaries should be located here */
+ /* CRC32 should be located here, after the microcode binaries */
+} __attribute__ ((packed));
+
+struct qe_firmware_info {
+ char id[64]; /* Firmware name */
+ u32 vtraps[8]; /* Virtual trap addresses */
+ u64 extended_modes; /* Extended modes */
+};
+
void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign);
void qe_issue_cmd(uint cmd, uint sbc, u8 mcn, u32 cmd_data);
uint qe_muram_alloc(uint size, uint align);
@@ -233,5 +287,7 @@ void qe_reset(void);
void qe_assign_page(uint snum, uint para_ram_base);
int qe_set_brg(uint brg, uint rate);
int qe_set_mii_clk_src(int ucc_num);
+int qe_upload_firmware(const struct qe_firmware *firmware);
+struct qe_firmware_info *qe_get_firmware_info(void);
#endif /* __QE_H__ */
diff --git a/include/asm-ppc/cache.h b/include/asm-ppc/cache.h
index e29bfc2..9d9b971 100644
--- a/include/asm-ppc/cache.h
+++ b/include/asm-ppc/cache.h
@@ -8,15 +8,13 @@
#include <asm/processor.h>
/* bytes per L1 cache line */
-#if !(defined(CONFIG_8xx) || defined(CONFIG_IOP480))
-#if defined(CONFIG_PPC64BRIDGE)
+#if defined(CONFIG_8xx) || defined(CONFIG_IOP480)
+#define L1_CACHE_SHIFT 4
+#elif defined(CONFIG_PPC64BRIDGE)
#define L1_CACHE_SHIFT 7
#else
#define L1_CACHE_SHIFT 5
-#endif /* PPC64 */
-#else
-#define L1_CACHE_SHIFT 4
-#endif /* !(8xx || IOP480) */
+#endif
#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
diff --git a/include/asm-ppc/immap_qe.h b/include/asm-ppc/immap_qe.h
index a16a6d3..39da377 100644
--- a/include/asm-ppc/immap_qe.h
+++ b/include/asm-ppc/immap_qe.h
@@ -513,10 +513,39 @@ typedef struct dbg {
u8 res2[0x48];
} __attribute__ ((packed)) dbg_t;
-/* RISC Special Registers (Trap and Breakpoint)
+/*
+ * RISC Special Registers (Trap and Breakpoint). These are described in
+ * the QE Developer's Handbook.
*/
typedef struct rsp {
- u8 fixme[0x100];
+ u32 tibcr[16]; /* Trap/instruction breakpoint control regs */
+ u8 res0[64];
+ u32 ibcr0;
+ u32 ibs0;
+ u32 ibcnr0;
+ u8 res1[4];
+ u32 ibcr1;
+ u32 ibs1;
+ u32 ibcnr1;
+ u32 npcr;
+ u32 dbcr;
+ u32 dbar;
+ u32 dbamr;
+ u32 dbsr;
+ u32 dbcnr;
+ u8 res2[12];
+ u32 dbdr_h;
+ u32 dbdr_l;
+ u32 dbdmr_h;
+ u32 dbdmr_l;
+ u32 bsr;
+ u32 bor;
+ u32 bior;
+ u8 res3[4];
+ u32 iatr[4];
+ u32 eccr; /* Exception control configuration register */
+ u32 eicr;
+ u8 res4[0x100-0xf8];
} __attribute__ ((packed)) rsp_t;
typedef struct qe_immap {
diff --git a/include/asm-ppc/mmu.h b/include/asm-ppc/mmu.h
index b19abe7..45a4764 100644
--- a/include/asm-ppc/mmu.h
+++ b/include/asm-ppc/mmu.h
@@ -336,55 +336,70 @@ extern int write_bat(ppc_bat_t bat, unsigned long upper, unsigned long lower);
*/
/*
- * e500 support
+ * FSL Book-E support
*/
-#define MAS0_TLBSEL 0x10000000
-#define MAS0_ESEL 0x000F0000
-#define MAS0_NV 0x00000001
-
-#define MAS1_VALID 0x80000000
-#define MAS1_IPROT 0x40000000
-#define MAS1_TID 0x00FF0000
-#define MAS1_TS 0x00001000
-#define MAS1_TSIZE 0x00000F00
-
-#define MAS2_EPN 0xFFFFF000
-#define MAS2_SHAREN 0x00000200
-#define MAS2_X0 0x00000040
-#define MAS2_X1 0x00000020
-#define MAS2_W 0x00000010
-#define MAS2_I 0x00000008
-#define MAS2_M 0x00000004
-#define MAS2_G 0x00000002
-#define MAS2_E 0x00000001
-
-#define MAS3_RPN 0xFFFFF000
-#define MAS3_U0 0x00000200
-#define MAS3_U1 0x00000100
-#define MAS3_U2 0x00000080
-#define MAS3_U3 0x00000040
-#define MAS3_UX 0x00000020
-#define MAS3_SX 0x00000010
-#define MAS3_UW 0x00000008
-#define MAS3_SW 0x00000004
-#define MAS3_UR 0x00000002
-#define MAS3_SR 0x00000001
-
-#define MAS4_TLBSELD 0x10000000
-#define MAS4_TIDDSEL 0x00030000
-#define MAS4_DSHAREN 0x00001000
-#define MAS4_TSIZED(x) (x << 8)
-#define MAS4_X0D 0x00000040
-#define MAS4_X1D 0x00000020
-#define MAS4_WD 0x00000010
-#define MAS4_ID 0x00000008
-#define MAS4_MD 0x00000004
-#define MAS4_GD 0x00000002
-#define MAS4_ED 0x00000001
-
-#define MAS6_SPID 0x00FF0000
-#define MAS6_SAS 0x00000001
+#define MAS0_TLBSEL(x) ((x << 28) & 0x30000000)
+#define MAS0_ESEL(x) ((x << 16) & 0x0FFF0000)
+#define MAS0_NV(x) ((x) & 0x00000FFF)
+
+#define MAS1_VALID 0x80000000
+#define MAS1_IPROT 0x40000000
+#define MAS1_TID(x) ((x << 16) & 0x3FFF0000)
+#define MAS1_TS 0x00001000
+#define MAS1_TSIZE(x) ((x << 8) & 0x00000F00)
+
+#define MAS2_EPN 0xFFFFF000
+#define MAS2_X0 0x00000040
+#define MAS2_X1 0x00000020
+#define MAS2_W 0x00000010
+#define MAS2_I 0x00000008
+#define MAS2_M 0x00000004
+#define MAS2_G 0x00000002
+#define MAS2_E 0x00000001
+
+#define MAS3_RPN 0xFFFFF000
+#define MAS3_U0 0x00000200
+#define MAS3_U1 0x00000100
+#define MAS3_U2 0x00000080
+#define MAS3_U3 0x00000040
+#define MAS3_UX 0x00000020
+#define MAS3_SX 0x00000010
+#define MAS3_UW 0x00000008
+#define MAS3_SW 0x00000004
+#define MAS3_UR 0x00000002
+#define MAS3_SR 0x00000001
+
+#define MAS4_TLBSELD(x) MAS0_TLBSEL(x)
+#define MAS4_TIDDSEL 0x000F0000
+#define MAS4_TSIZED(x) MAS1_TSIZE(x)
+#define MAS4_X0D 0x00000040
+#define MAS4_X1D 0x00000020
+#define MAS4_WD 0x00000010
+#define MAS4_ID 0x00000008
+#define MAS4_MD 0x00000004
+#define MAS4_GD 0x00000002
+#define MAS4_ED 0x00000001
+
+#define MAS6_SPID0 0x3FFF0000
+#define MAS6_SPID1 0x00007FFE
+#define MAS6_SAS 0x00000001
+#define MAS6_SPID MAS6_SPID0
+
+#define MAS7_RPN 0xFFFFFFFF
+
+#define FSL_BOOKE_MAS0(tlbsel,esel,nv) \
+ (MAS0_TLBSEL(tlbsel) | MAS0_ESEL(esel) | MAS0_NV(nv))
+#define FSL_BOOKE_MAS1(v,iprot,tid,ts,tsize) \
+ ((((v) << 31) & MAS1_VALID) |\
+ (((iprot) << 30) & MAS1_IPROT) |\
+ (MAS1_TID(tid)) |\
+ (((ts) << 12) & MAS1_TS) |\
+ (MAS1_TSIZE(tsize)))
+#define FSL_BOOKE_MAS2(epn, wimge) \
+ (((epn) & MAS3_RPN) | (wimge))
+#define FSL_BOOKE_MAS3(rpn, user, perms) \
+ (((rpn) & MAS3_RPN) | (user) | (perms))
#define BOOKE_PAGESZ_1K 0
#define BOOKE_PAGESZ_4K 1
@@ -398,6 +413,10 @@ extern int write_bat(ppc_bat_t bat, unsigned long upper, unsigned long lower);
#define BOOKE_PAGESZ_256M 9
#define BOOKE_PAGESZ_1G 10
#define BOOKE_PAGESZ_4G 11
+#define BOOKE_PAGESZ_16GB 12
+#define BOOKE_PAGESZ_64GB 13
+#define BOOKE_PAGESZ_256GB 14
+#define BOOKE_PAGESZ_1TB 15
#if defined(CONFIG_MPC86xx)
#define LAWBAR_BASE_ADDR 0x00FFFFFF
diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h
index 9fbbdf8..86c5df2 100644
--- a/include/asm-ppc/processor.h
+++ b/include/asm-ppc/processor.h
@@ -424,6 +424,8 @@
#define SPRN_IVOR15 0x19f /* Interrupt Vector Offset Register 15 */
/* e500 definitions */
+#define SPRN_L1CFG0 0x203 /* L1 Cache Configuration Register 0 */
+#define SPRN_L1CFG1 0x204 /* L1 Cache Configuration Register 1 */
#define SPRN_L1CSR0 0x3f2 /* L1 Data Cache Control and Status Register 0 */
#define L1CSR0_CPE 0x00010000 /* Data Cache Parity Enable */
#define L1CSR0_DCFI 0x00000002 /* Data Cache Flash Invalidate */
@@ -621,6 +623,8 @@
#define MCSRR1 SPRN_MCSRR1
#define L1CSR0 SPRN_L1CSR0
#define L1CSR1 SPRN_L1CSR1
+#define L1CFG0 SPRN_L1CFG0
+#define L1CFG1 SPRN_L1CFG1
#define MCSR SPRN_MCSR
#define MMUCSR0 SPRN_MMUCSR0
#define BUCSR SPRN_BUCSR
diff --git a/include/configs/ATUM8548.h b/include/configs/ATUM8548.h
new file mode 100644
index 0000000..f7020b4
--- /dev/null
+++ b/include/configs/ATUM8548.h
@@ -0,0 +1,458 @@
+/*
+ * Copyright 2007
+ * Robert Lazarski, Instituto Atlantico, robertlazarski@gmail.com
+ *
+ * Copyright 2004, 2007 Freescale Semiconductor.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * atum8548 board configuration file
+ *
+ * Please refer to doc/README.atum8548 for more info.
+ *
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* Debug Options, Disable in production
+#define ET_DEBUG 1
+#define CONFIG_PANIC_HANG 1
+#define DEBUG 1
+*/
+
+/* CPLD Configuration Options */
+#define MPC85xx_ATUM_CLKOCR 0x80000002
+
+/* High Level Configuration Options */
+#define CONFIG_BOOKE 1 /* BOOKE */
+#define CONFIG_E500 1 /* BOOKE e500 family */
+#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */
+#define CONFIG_MPC8548 1 /* MPC8548 specific */
+
+#define CONFIG_PCI 1 /* enable any pci type devices */
+#define CONFIG_PCI1 1 /* PCI controller 1 */
+#define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */
+#define CONFIG_PCI2 1 /* PCI controller 2 */
+#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
+
+#define CONFIG_TSEC_ENET 1 /* tsec ethernet support */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for DDR setup*/
+#undef CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */
+
+#define CONFIG_DDR_ECC /* only for ECC DDR module */
+#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */
+#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
+#define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */
+
+#define MPC85xx_DDR_SDRAM_CLK_CNTL /* 85xx has clock control reg */
+
+#define CONFIG_SYS_CLK_FREQ 33000000
+
+/*
+ * These can be toggled for performance analysis, otherwise use default.
+ */
+#define CONFIG_L2_CACHE /* toggle L2 cache */
+#define CONFIG_BTB /* toggle branch predition */
+#define CONFIG_ADDR_STREAMING /* toggle addr streaming */
+#define CONFIG_CLEAR_LAW0 /* Clear LAW0 in cpu_init_r */
+
+/*
+ * Only possible on E500 Version 2 or newer cores.
+ */
+#define CONFIG_ENABLE_36BIT_PHYS 1
+
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
+
+#define CONFIG_CMD_SDRAM 1 /* SDRAM DIMM SPD info printout */
+#define CONFIG_ENABLE_36BIT_PHYS 1
+#undef CFG_DRAM_TEST
+#define CFG_MEMTEST_START 0x00200000 /* memtest works on */
+#define CFG_MEMTEST_END 0x00400000
+
+/*
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ */
+#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
+#define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
+#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
+
+#define PCI_SPEED 33333000 /* CPLD currenlty does not have PCI setup info */
+#define CFG_PCI1_ADDR (CFG_CCSRBAR+0x8000)
+#define CFG_PCI2_ADDR (CFG_CCSRBAR+0x9000)
+#define CFG_PCIE1_ADDR (CFG_CCSRBAR+0xa000)
+
+/*
+ * DDR Setup
+ */
+#define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/
+#define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE
+
+#if defined(CONFIG_SPD_EEPROM)
+ /*
+ * Determine DDR configuration from I2C interface.
+ */
+ #define SPD_EEPROM_ADDRESS 0x51 /* DDR DIMM */
+
+#else
+ /*
+ * Manually set up DDR parameters
+ */
+ #define CFG_SDRAM_SIZE 1024 /* DDR is 1024MB */
+ #define CFG_DDR_CS0_BNDS 0x0000000f /* 0-1024 */
+ #define CFG_DDR_CS0_CONFIG 0x80000102
+ #define CFG_DDR_TIMING_0 0x00260802
+ #define CFG_DDR_TIMING_1 0x38355322
+ #define CFG_DDR_TIMING_2 0x039048c7
+ #define CFG_DDR_CONTROL 0xc2000000 /* unbuffered,no DYN_PWR */
+ #define CFG_DDR_MODE 0x00000432
+ #define CFG_DDR_INTERVAL 0x05150100
+ #define DDR_SDRAM_CFG 0x43000000
+#endif
+
+#undef CONFIG_CLOCKS_IN_MHZ
+
+/*
+ * Local Bus Definitions
+ */
+
+/*
+ * FLASH on the Local Bus
+ * based on flash chip S29GL01GP
+ * One bank, 128M, using the CFI driver.
+ * Boot from BR0 bank at 0xf800_0000
+ *
+ * BR0:
+ * Base address 0 = 0xF8000000 = BR0[0:16] = 1111 1000 0000 0000 0
+ * Port Size = 16 bits = BRx[19:20] = 10
+ * Use GPCM = BRx[24:26] = 000
+ * Valid = BRx[31] = 1
+ *
+ * 0 4 8 12 16 20 24 28
+ * 1111 1000 0000 0000 0001 0000 0000 0001 = f8001001 BR0
+ *
+ * OR0:
+ * Addr Mask = 128M = ORx[0:16] = 1111 1000 0000 0000 0
+ * Reserved ORx[17:18] = 00
+ * CSNT = ORx[20] = 1
+ * ACS = half cycle delay = ORx[21:22] = 11
+ * SCY = 6 = ORx[24:27] = 0110
+ * TRLX = use relaxed timing = ORx[29] = 1
+ * EAD = use external address latch delay = OR[31] = 1
+ *
+ * 0 4 8 12 16 20 24 28
+ * 1111 1000 0000 0000 0000 1110 0110 0101 = f8000E65 ORx
+ */
+
+#define CFG_BOOT_BLOCK 0xf8000000 /* boot TLB block */
+#define CFG_FLASH_BASE CFG_BOOT_BLOCK /* start of FLASH 128M */
+
+#define CFG_BR0_PRELIM 0xf8001001
+
+#define CFG_OR0_PRELIM 0xf8000E65
+
+#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
+#define CFG_MAX_FLASH_SECT 1024 /* sectors per device */
+#undef CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT 512000 /* Flash Erase Timeout (ms) */
+#define CFG_FLASH_WRITE_TOUT 8000 /* Flash Write Timeout (ms) */
+
+
+#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
+
+#define CFG_FLASH_CFI_DRIVER 1
+#define CFG_FLASH_CFI 1
+#define CFG_FLASH_EMPTY_INFO
+
+/*
+ * Flash on the LocalBus
+ */
+#define CFG_LBC_CACHE_BASE 0xf0000000 /* Localbus cacheable */
+
+/* Memory */
+#define CFG_INIT_RAM_LOCK 1
+#define CFG_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */
+#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
+
+#define CFG_INIT_L2_ADDR 0xf8f80000 /* relocate boot L2SRAM */
+
+#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
+
+/* Serial Port */
+#define CONFIG_CONS_INDEX 1
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE 1
+#define CFG_NS16550_CLK get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+
+#define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500)
+#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600)
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+
+/*
+ * I2C
+ */
+#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
+#define CONFIG_HARD_I2C /* I2C with hardware support*/
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_EEPROM_ADDR 0x57
+#define CFG_I2C_SLAVE 0x7F
+#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
+#define CFG_I2C_OFFSET 0x3000
+
+/*
+ * General PCI
+ * Memory space is mapped 1-1, but I/O space must start from 0.
+ */
+#define CFG_PCI_PHYS 0x80000000 /* 1G PCI TLB */
+
+#define CFG_PCI1_MEM_BASE 0x80000000
+#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
+#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */
+#define CFG_PCI1_IO_BASE 0x00000000
+#define CFG_PCI1_IO_PHYS 0xe2000000
+#define CFG_PCI1_IO_SIZE 0x00100000 /* 1M */
+
+#ifdef CONFIG_PCI2
+#define CFG_PCI2_MEM_BASE 0xC0000000
+#define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE
+#define CFG_PCI2_MEM_SIZE 0x20000000 /* 512M */
+#define CFG_PCI2_IO_BASE 0x00000000
+#define CFG_PCI2_IO_PHYS 0xe2800000
+#define CFG_PCI2_IO_SIZE 0x00100000 /* 1M */
+#endif
+
+#ifdef CONFIG_PCIE1
+#define CFG_PCIE1_MEM_BASE 0xa0000000
+#define CFG_PCIE1_MEM_PHYS CFG_PCIE1_MEM_BASE
+#define CFG_PCIE1_MEM_SIZE 0x20000000 /* 512M */
+#define CFG_PCIE1_IO_BASE 0x00000000
+#define CFG_PCIE1_IO_PHYS 0xe3000000
+#define CFG_PCIE1_IO_SIZE 0x00100000 /* 1M */
+#endif
+
+
+#if !defined(CONFIG_PCI_PNP)
+ #define PCI_ENET0_IOADDR 0xe0000000
+ #define PCI_ENET0_MEMADDR 0xe0000000
+ #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
+#endif
+
+#if defined(CONFIG_PCI)
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+
+#undef CONFIG_EEPRO100
+#undef CONFIG_TULIP
+
+#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+
+/* PCI view of System Memory */
+#define CFG_PCI_MEMORY_BUS 0x00000000
+#define CFG_PCI_MEMORY_PHYS 0x00000000
+#define CFG_PCI_MEMORY_SIZE 0x80000000
+
+#endif /* CONFIG_PCI */
+
+#if defined(CONFIG_TSEC_ENET)
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI 1
+#endif
+
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_TSEC1 1
+#define CONFIG_TSEC1_NAME "eTSEC0"
+#define CONFIG_TSEC2 1
+#define CONFIG_TSEC2_NAME "eTSEC1"
+#define CONFIG_TSEC3 1
+#define CONFIG_TSEC3_NAME "eTSEC2"
+#define CONFIG_TSEC4 1
+#define CONFIG_TSEC4_NAME "eTSEC3"
+#undef CONFIG_MPC85XX_FEC
+
+#define TSEC1_PHY_ADDR 0
+#define TSEC2_PHY_ADDR 1
+#define TSEC3_PHY_ADDR 2
+#define TSEC4_PHY_ADDR 3
+
+#define TSEC1_PHYIDX 0
+#define TSEC2_PHYIDX 0
+#define TSEC3_PHYIDX 0
+#define TSEC4_PHYIDX 0
+#define TSEC1_FLAGS TSEC_GIGABIT
+#define TSEC2_FLAGS TSEC_GIGABIT
+#define TSEC3_FLAGS TSEC_GIGABIT
+#define TSEC4_FLAGS TSEC_GIGABIT
+
+/* Options are: eTSEC[0-3] */
+#define CONFIG_ETHPRIME "eTSEC2"
+#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
+#endif /* CONFIG_TSEC_ENET */
+
+/*
+ * Environment
+ */
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
+#define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
+#define CFG_ENV_SIZE 0x2000
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+
+#if defined(CONFIG_PCI)
+ #define CONFIG_CMD_PCI
+#endif
+
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_LOAD_ADDR 0x2000000 /* default load address */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+
+/* The mac addresses for all ethernet interface */
+#if defined(CONFIG_TSEC_ENET)
+#define CONFIG_HAS_ETH0
+#define CONFIG_ETHADDR 00:E0:0C:00:00:FD
+#define CONFIG_HAS_ETH1
+#define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD
+#define CONFIG_HAS_ETH2
+#define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD
+#define CONFIG_HAS_ETH3
+#define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD
+#endif
+
+#define CONFIG_IPADDR 10.101.43.142
+
+#define CONFIG_HOSTNAME atum
+#define CONFIG_ROOTPATH /nfsroot
+#define CONFIG_BOOTFILE /tftpboot/uImage.atum
+#define CONFIG_UBOOTPATH /tftpboot/uboot.bin /* TFTP server */
+
+#define CONFIG_SERVERIP 10.101.43.10
+#define CONFIG_GATEWAYIP 10.101.45.1
+#define CONFIG_NETMASK 255.255.248.0
+
+#define CONFIG_LOADADDR 1000000 /*default location for tftp and bootm*/
+
+#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
+#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
+
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_NFSBOOTCOMMAND \
+ "setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$serverip:$rootpath " \
+ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $dtbaddr $dtbfile;" \
+ "bootm $loadaddr - $dtbaddr"
+
+
+#define CONFIG_RAMBOOTCOMMAND \
+ "setenv bootargs root=/dev/ram rw " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $ramdiskaddr $ramdiskfile;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $dtbaddr $dtbfile;" \
+ "bootm $loadaddr $ramdiskaddr $dtbaddr"
+
+#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h
index 35e1d63..afce7fb 100644
--- a/include/configs/MPC8540ADS.h
+++ b/include/configs/MPC8540ADS.h
@@ -460,13 +460,6 @@
*/
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE 32768
-#define CFG_CACHELINE_SIZE 32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/
-#endif
-
/*
* Internal Definitions
*
diff --git a/include/configs/MPC8540EVAL.h b/include/configs/MPC8540EVAL.h
index e376c11..2868dcb 100644
--- a/include/configs/MPC8540EVAL.h
+++ b/include/configs/MPC8540EVAL.h
@@ -319,13 +319,6 @@
*/
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE 32768
-#define CFG_CACHELINE_SIZE 32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
/*
* Internal Definitions
*
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index d2e7237..c83382f 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -450,13 +450,6 @@ extern unsigned long get_clock_freq(void);
*/
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE 32768
-#define CFG_CACHELINE_SIZE 32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/
-#endif
-
/*
* Internal Definitions
*
diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h
index 545a76c..5a96db5 100644
--- a/include/configs/MPC8544DS.h
+++ b/include/configs/MPC8544DS.h
@@ -444,13 +444,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
*/
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE 32768
-#define CFG_CACHELINE_SIZE 32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/
-#endif
-
/*
* Internal Definitions
*
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index 3f382e5..90beb25 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -512,13 +512,6 @@ extern unsigned long get_clock_freq(void);
*/
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE 32768
-#define CFG_CACHELINE_SIZE 32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/
-#endif
-
/*
* Internal Definitions
*
diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index 90ef3d6..76d673c 100644
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -450,13 +450,6 @@ extern unsigned long get_clock_freq(void);
*/
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE 32768
-#define CFG_CACHELINE_SIZE 32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/
-#endif
-
/*
* Internal Definitions
*
diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h
index d4e0de0..5f10555 100644
--- a/include/configs/MPC8560ADS.h
+++ b/include/configs/MPC8560ADS.h
@@ -490,13 +490,6 @@
*/
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE 32768
-#define CFG_CACHELINE_SIZE 32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/
-#endif
-
/*
* Internal Definitions
*
diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index 59f490e..2b089d9 100644
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -480,13 +480,6 @@ extern unsigned long get_clock_freq(void);
*/
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE 32768
-#define CFG_CACHELINE_SIZE 32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/
-#endif
-
/*
* Internal Definitions
*
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index 575bbae..7f485c6 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -573,13 +573,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
*/
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE 32768
-#define CFG_CACHELINE_SIZE 32
-#if defined(CONFIG_CMD_KGDB)
- #define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/
-#endif
-
/*
* Internal Definitions
*
diff --git a/include/configs/PM854.h b/include/configs/PM854.h
index a6a1e73..f0d0399 100644
--- a/include/configs/PM854.h
+++ b/include/configs/PM854.h
@@ -366,13 +366,6 @@
*/
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE 32768
-#define CFG_CACHELINE_SIZE 32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/
-#endif
-
/*
* Internal Definitions
*
diff --git a/include/configs/PM856.h b/include/configs/PM856.h
index 9a17e3d..ae2645c 100644
--- a/include/configs/PM856.h
+++ b/include/configs/PM856.h
@@ -365,13 +365,6 @@
*/
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE 32768
-#define CFG_CACHELINE_SIZE 32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/
-#endif
-
/*
* Internal Definitions
*
diff --git a/include/configs/SBC8540.h b/include/configs/SBC8540.h
index f2c3699..3ca85b8 100644
--- a/include/configs/SBC8540.h
+++ b/include/configs/SBC8540.h
@@ -395,13 +395,6 @@
*/
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE 32768
-#define CFG_CACHELINE_SIZE 32
-#if defined(CONFIG_CMD_KGDB)
- #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
/*
* Internal Definitions
*
diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h
index 6dbd392..f3b1a53 100644
--- a/include/configs/TQM85xx.h
+++ b/include/configs/TQM85xx.h
@@ -417,13 +417,6 @@
*/
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE 32768
-#define CFG_CACHELINE_SIZE 32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value */
-#endif
-
/*
* Internal Definitions
*
diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h
new file mode 100644
index 0000000..c050a06
--- /dev/null
+++ b/include/configs/sbc8548.h
@@ -0,0 +1,569 @@
+/*
+ * Copyright 2007 Wind River Systems <www.windriver.com>
+ * Copyright 2007 Embedded Specialties, Inc.
+ * Copyright 2004, 2007 Freescale Semiconductor.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * sbc8548 board configuration file
+ *
+ * Please refer to doc/README.sbc85xx for more info.
+ *
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* High Level Configuration Options */
+#define CONFIG_BOOKE 1 /* BOOKE */
+#define CONFIG_E500 1 /* BOOKE e500 family */
+#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */
+#define CONFIG_MPC8548 1 /* MPC8548 specific */
+#define CONFIG_SBC8548 1 /* SBC8548 board specific */
+
+#undef CONFIG_PCI /* enable any pci type devices */
+#undef CONFIG_PCI1 /* PCI controller 1 */
+#undef CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */
+#undef CONFIG_RIO
+#undef CONFIG_PCI2
+#undef CONFIG_FSL_PCI_INIT /* Use common FSL init code */
+
+#define CONFIG_TSEC_ENET /* tsec ethernet support */
+#define CONFIG_ENV_OVERWRITE
+#undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/
+#define CONFIG_DDR_DLL /* possible DLL fix needed */
+#define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */
+
+#undef CONFIG_DDR_ECC /* only for ECC DDR module */
+#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */
+#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
+#define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */
+
+
+#define MPC85xx_DDR_SDRAM_CLK_CNTL /* 85xx has clock control reg */
+
+#define CONFIG_SYS_CLK_FREQ 66000000 /* SBC8548 default SYSCLK */
+
+/*
+ * These can be toggled for performance analysis, otherwise use default.
+ */
+#define CONFIG_L2_CACHE /* toggle L2 cache */
+#define CONFIG_BTB /* toggle branch predition */
+#define CONFIG_ADDR_STREAMING /* toggle addr streaming */
+#define CONFIG_CLEAR_LAW0 /* Clear LAW0 in cpu_init_r */
+
+/*
+ * Only possible on E500 Version 2 or newer cores.
+ */
+#define CONFIG_ENABLE_36BIT_PHYS 1
+
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
+
+#undef CFG_DRAM_TEST /* memory test, takes time */
+#define CFG_MEMTEST_START 0x00200000 /* memtest works on */
+#define CFG_MEMTEST_END 0x00400000
+
+/*
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ */
+#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
+#define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
+#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
+
+#define CFG_PCI1_ADDR (CFG_CCSRBAR+0x8000)
+#define CFG_PCI2_ADDR (CFG_CCSRBAR+0x9000)
+#define CFG_PCIE1_ADDR (CFG_CCSRBAR+0xa000)
+
+/*
+ * DDR Setup
+ */
+#define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/
+#define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE
+
+#define SPD_EEPROM_ADDRESS 0x51 /* DDR DIMM */
+
+/*
+ * Make sure required options are set
+ */
+#ifndef CONFIG_SPD_EEPROM
+ #define CFG_SDRAM_SIZE 256 /* DDR is 256MB */
+#endif
+
+#undef CONFIG_CLOCKS_IN_MHZ
+
+/*
+ * FLASH on the Local Bus
+ * Two banks, one 8MB the other 64MB, using the CFI driver.
+ * Boot from BR0/OR0 bank at 0xff80_0000
+ * Alternate BR6/OR6 bank at 0xfb80_0000
+ *
+ * BR0:
+ * Base address 0 = 0xff80_0000 = BR0[0:16] = 1111 1111 1000 0000 0
+ * Port Size = 8 bits = BRx[19:20] = 01
+ * Use GPCM = BRx[24:26] = 000
+ * Valid = BRx[31] = 1
+ *
+ * 0 4 8 12 16 20 24 28
+ * 1111 1111 1000 0000 0000 1000 0000 0001 = ff800801 BR0
+ *
+ * BR6:
+ * Base address 6 = 0xfb80_0000 = BR6[0:16] = 1111 1011 1000 0000 0
+ * Port Size = 32 bits = BRx[19:20] = 11
+ * Use GPCM = BRx[24:26] = 000
+ * Valid = BRx[31] = 1
+ *
+ * 0 4 8 12 16 20 24 28
+ * 1111 1011 1000 0000 0001 1000 0000 0001 = fb801801 BR6
+ *
+ * OR0:
+ * Addr Mask = 8M = OR1[0:16] = 1111 1111 1000 0000 0
+ * XAM = OR0[17:18] = 11
+ * CSNT = OR0[20] = 1
+ * ACS = half cycle delay = OR0[21:22] = 11
+ * SCY = 6 = OR0[24:27] = 0110
+ * TRLX = use relaxed timing = OR0[29] = 1
+ * EAD = use external address latch delay = OR0[31] = 1
+ *
+ * 0 4 8 12 16 20 24 28
+ * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65 OR0
+ *
+ * OR6:
+ * Addr Mask = 64M = OR6[0:16] = 1111 1100 0000 0000 0
+ * XAM = OR6[17:18] = 11
+ * CSNT = OR6[20] = 1
+ * ACS = half cycle delay = OR6[21:22] = 11
+ * SCY = 6 = OR6[24:27] = 0110
+ * TRLX = use relaxed timing = OR6[29] = 1
+ * EAD = use external address latch delay = OR6[31] = 1
+ *
+ * 0 4 8 12 16 20 24 28
+ * 1111 1100 0000 0000 0110 1110 0110 0101 = fc006e65 OR6
+ */
+
+#define CFG_BOOT_BLOCK 0xff800000 /* start of 8MB Flash */
+#define CFG_FLASH_BASE CFG_BOOT_BLOCK /* start of FLASH 16M */
+
+#define CFG_BR0_PRELIM 0xff800801
+#define CFG_BR6_PRELIM 0xfb801801
+
+#define CFG_OR0_PRELIM 0xff806e65
+#define CFG_OR6_PRELIM 0xfc006e65
+
+#define CFG_FLASH_BANKS_LIST {0xff800000, CFG_FLASH_BASE}
+#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
+#define CFG_MAX_FLASH_SECT 128 /* sectors per device */
+#undef CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
+
+#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
+
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_CFI
+#define CFG_FLASH_EMPTY_INFO
+
+/* CS5 = Local bus peripherals controlled by the EPLD */
+
+#define CFG_BR5_PRELIM 0xf8000801
+#define CFG_OR5_PRELIM 0xff006e65
+#define CFG_EPLD_BASE 0xf8000000
+#define CFG_LED_DISP_BASE 0xf8000000
+#define CFG_USER_SWITCHES_BASE 0xf8100000
+#define CFG_BD_REV 0xf8300000
+#define CFG_EEPROM_BASE 0xf8b00000
+
+/*
+ * SDRAM on the Local Bus
+ */
+#define CFG_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */
+#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */
+
+/*
+ * Base Register 3 and Option Register 3 configure SDRAM.
+ * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
+ *
+ * For BR3, need:
+ * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
+ * port-size = 32-bits = BR2[19:20] = 11
+ * no parity checking = BR2[21:22] = 00
+ * SDRAM for MSEL = BR2[24:26] = 011
+ * Valid = BR[31] = 1
+ *
+ * 0 4 8 12 16 20 24 28
+ * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
+ *
+ */
+
+#define CFG_BR3_PRELIM 0xf0001861
+
+/*
+ * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
+ *
+ * For OR3, need:
+ * 64MB mask for AM, OR3[0:7] = 1111 1100
+ * XAM, OR3[17:18] = 11
+ * 10 columns OR3[19-21] = 011
+ * 12 rows OR3[23-25] = 011
+ * EAD set for extra time OR[31] = 0
+ *
+ * 0 4 8 12 16 20 24 28
+ * 1111 1100 0000 0000 0110 1100 1100 0000 = fc006cc0
+ */
+
+#define CFG_OR3_PRELIM 0xfc006cc0
+
+#define CFG_LBC_LCRR 0x00000002 /* LB clock ratio reg */
+#define CFG_LBC_LBCR 0x00000000 /* LB config reg */
+#define CFG_LBC_LSRT 0x20000000 /* LB sdram refresh timer */
+#define CFG_LBC_MRTPR 0x00000000 /* LB refresh timer prescal*/
+
+/*
+ * LSDMR masks
+ */
+#define CFG_LBC_LSDMR_RFEN (1 << (31 - 1))
+#define CFG_LBC_LSDMR_BSMA1516 (3 << (31 - 10))
+#define CFG_LBC_LSDMR_BSMA1617 (4 << (31 - 10))
+#define CFG_LBC_LSDMR_RFCR16 (7 << (31 - 16))
+#define CFG_LBC_LSDMR_PRETOACT7 (7 << (31 - 19))
+#define CFG_LBC_LSDMR_ACTTORW7 (7 << (31 - 22))
+#define CFG_LBC_LSDMR_ACTTORW6 (6 << (31 - 22))
+#define CFG_LBC_LSDMR_BL8 (1 << (31 - 23))
+#define CFG_LBC_LSDMR_WRC4 (0 << (31 - 27))
+#define CFG_LBC_LSDMR_CL3 (3 << (31 - 31))
+
+#define CFG_LBC_LSDMR_OP_NORMAL (0 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_MRW (3 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PRECH (4 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PCHALL (5 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_RWINV (7 << (31 - 4))
+
+/*
+ * Common settings for all Local Bus SDRAM commands.
+ * At run time, either BSMA1516 (for CPU 1.1)
+ * or BSMA1617 (for CPU 1.0) (old)
+ * is OR'ed in too.
+ */
+#define CFG_LBC_LSDMR_COMMON ( CFG_LBC_LSDMR_RFCR16 \
+ | CFG_LBC_LSDMR_PRETOACT7 \
+ | CFG_LBC_LSDMR_ACTTORW7 \
+ | CFG_LBC_LSDMR_BL8 \
+ | CFG_LBC_LSDMR_WRC4 \
+ | CFG_LBC_LSDMR_CL3 \
+ | CFG_LBC_LSDMR_RFEN \
+ )
+
+#define CONFIG_L1_INIT_RAM
+#define CFG_INIT_RAM_LOCK 1
+#define CFG_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */
+#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
+
+#define CFG_INIT_L2_ADDR 0xf8f80000 /* relocate boot L2SRAM */
+
+#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
+
+/* Serial Port */
+#define CONFIG_CONS_INDEX 1
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE 1
+#define CFG_NS16550_CLK 400000000 /* get_bus_freq(0) */
+
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+
+#define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500)
+#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600)
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+#define CONFIG_OF_STDOUT_VIA_ALIAS 1
+
+/*
+ * I2C
+ */
+#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
+#define CONFIG_HARD_I2C /* I2C with hardware support*/
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_EEPROM_ADDR 0x50
+#define CFG_I2C_SLAVE 0x7F
+#define CFG_I2C_OFFSET 0x3000
+
+/*
+ * General PCI
+ * Memory space is mapped 1-1, but I/O space must start from 0.
+ */
+#define CFG_PCI_PHYS 0x80000000 /* 1G PCI TLB */
+
+#define CFG_PCI1_MEM_BASE 0x80000000
+#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
+#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */
+#define CFG_PCI1_IO_BASE 0x00000000
+#define CFG_PCI1_IO_PHYS 0xe2000000
+#define CFG_PCI1_IO_SIZE 0x00100000 /* 1M */
+
+#ifdef CONFIG_PCI2
+#define CFG_PCI2_MEM_BASE 0xa0000000
+#define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE
+#define CFG_PCI2_MEM_SIZE 0x20000000 /* 512M */
+#define CFG_PCI2_IO_BASE 0x00000000
+#define CFG_PCI2_IO_PHYS 0xe2800000
+#define CFG_PCI2_IO_SIZE 0x00100000 /* 1M */
+#endif
+
+#ifdef CONFIG_PCIE1
+#define CFG_PCIE1_MEM_BASE 0xa0000000
+#define CFG_PCIE1_MEM_PHYS CFG_PCIE1_MEM_BASE
+#define CFG_PCIE1_MEM_SIZE 0x20000000 /* 512M */
+#define CFG_PCIE1_IO_BASE 0x00000000
+#define CFG_PCIE1_IO_PHYS 0xe3000000
+#define CFG_PCIE1_IO_SIZE 0x00100000 /* 1M */
+#endif
+
+#ifdef CONFIG_RIO
+/*
+ * RapidIO MMU
+ */
+#define CFG_RIO_MEM_BASE 0xC0000000
+#define CFG_RIO_MEM_SIZE 0x20000000 /* 512M */
+#endif
+
+#ifdef CONFIG_LEGACY
+#define BRIDGE_ID 17
+#define VIA_ID 2
+#else
+#define BRIDGE_ID 28
+#define VIA_ID 4
+#endif
+
+#if defined(CONFIG_PCI)
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+
+#undef CONFIG_EEPRO100
+#undef CONFIG_TULIP
+
+#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+
+/* PCI view of System Memory */
+#define CFG_PCI_MEMORY_BUS 0x00000000
+#define CFG_PCI_MEMORY_PHYS 0x00000000
+#define CFG_PCI_MEMORY_SIZE 0x80000000
+
+#endif /* CONFIG_PCI */
+
+
+#if defined(CONFIG_TSEC_ENET)
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI 1
+#endif
+
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_TSEC1 1
+#define CONFIG_TSEC1_NAME "eTSEC0"
+#define CONFIG_TSEC2 1
+#define CONFIG_TSEC2_NAME "eTSEC1"
+#define CONFIG_TSEC3 1
+#define CONFIG_TSEC3_NAME "eTSEC2"
+#define CONFIG_TSEC4
+#define CONFIG_TSEC4_NAME "eTSEC3"
+#undef CONFIG_MPC85XX_FEC
+
+#define TSEC1_PHY_ADDR 0
+#define TSEC2_PHY_ADDR 1
+#define TSEC3_PHY_ADDR 2
+#define TSEC4_PHY_ADDR 3
+
+#define TSEC1_PHYIDX 0
+#define TSEC2_PHYIDX 0
+#define TSEC3_PHYIDX 0
+#define TSEC4_PHYIDX 0
+#define TSEC1_FLAGS TSEC_GIGABIT
+#define TSEC2_FLAGS TSEC_GIGABIT
+#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
+#define TSEC4_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
+
+/* Options are: eTSEC[0-3] */
+#define CONFIG_ETHPRIME "eTSEC0"
+#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
+#endif /* CONFIG_TSEC_ENET */
+
+/*
+ * Environment
+ */
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
+#define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
+#define CFG_ENV_SIZE 0x2000
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_ELF
+
+#if defined(CONFIG_PCI)
+ #define CONFIG_CMD_PCI
+#endif
+
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_LOAD_ADDR 0x2000000 /* default load address */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+
+/* The mac addresses for all ethernet interface */
+#if defined(CONFIG_TSEC_ENET)
+#define CONFIG_HAS_ETH0
+#define CONFIG_ETHADDR 02:E0:0C:00:00:FD
+#define CONFIG_HAS_ETH1
+#define CONFIG_ETH1ADDR 02:E0:0C:00:01:FD
+#define CONFIG_HAS_ETH2
+#define CONFIG_ETH2ADDR 02:E0:0C:00:02:FD
+#define CONFIG_HAS_ETH3
+#define CONFIG_ETH3ADDR 02:E0:0C:00:03:FD
+#endif
+
+#define CONFIG_IPADDR 192.168.0.55
+
+#define CONFIG_HOSTNAME sbc8548
+#define CONFIG_ROOTPATH /opt/eldk/ppc_85xx
+#define CONFIG_BOOTFILE /uImage
+#define CONFIG_UBOOTPATH /u-boot.bin /* TFTP server */
+
+#define CONFIG_SERVERIP 192.168.0.2
+#define CONFIG_GATEWAYIP 192.168.0.1
+#define CONFIG_NETMASK 255.255.255.0
+
+#define CONFIG_LOADADDR 1000000 /*default location for tftp and bootm*/
+
+#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
+#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
+
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
+ "tftpflash=tftpboot $loadaddr $uboot; " \
+ "protect off " MK_STR(TEXT_BASE) " +$filesize; " \
+ "erase " MK_STR(TEXT_BASE) " +$filesize; " \
+ "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \
+ "protect on " MK_STR(TEXT_BASE) " +$filesize; " \
+ "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \
+ "consoledev=ttyS0\0" \
+ "ramdiskaddr=2000000\0" \
+ "ramdiskfile=uRamdisk\0" \
+ "fdtaddr=c00000\0" \
+ "fdtfile=sbc8548.dtb\0"
+
+#define CONFIG_NFSBOOTCOMMAND \
+ "setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$serverip:$rootpath " \
+ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr - $fdtaddr"
+
+
+#define CONFIG_RAMBOOTCOMMAND \
+ "setenv bootargs root=/dev/ram rw " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $ramdiskaddr $ramdiskfile;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr $ramdiskaddr $fdtaddr"
+
+#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h
index defc428..b71ba78 100644
--- a/include/configs/sbc8560.h
+++ b/include/configs/sbc8560.h
@@ -377,13 +377,6 @@
*/
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE 32768
-#define CFG_CACHELINE_SIZE 32
-#if defined(CONFIG_CMD_KGDB)
- #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
/*
* Internal Definitions
*
diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h
index c5ae0cd..3baa32c 100644
--- a/include/configs/stxgp3.h
+++ b/include/configs/stxgp3.h
@@ -357,13 +357,6 @@
*/
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE 32768
-#define CFG_CACHELINE_SIZE 32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
/*
* Internal Definitions
*
diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h
index c6e7953..9457bce 100644
--- a/include/configs/stxssa.h
+++ b/include/configs/stxssa.h
@@ -391,13 +391,6 @@
*/
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-/* Cache Configuration */
-#define CFG_DCACHE_SIZE 32768
-#define CFG_CACHELINE_SIZE 32
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
/*
* Internal Definitions
*
diff --git a/include/e500.h b/include/e500.h
index 0d73260..1971eee 100644
--- a/include/e500.h
+++ b/include/e500.h
@@ -17,100 +17,6 @@ typedef struct
#endif /* _ASMLANGUAGE */
-/* Motorola E500 core provides 16 TLB1 entries; they can be used for
- * initial memory mapping like legacy BAT registers do. Usually we
- * use four MAS registers(MAS0-3) to operate on TLB1 entries.
- *
- * While there are 16 Entries with variable Page Sizes in TLB1,
- * there are also 256 Entries with fixed 4K pages in TLB0.
- *
- * We also need LAWs(Local Access Window) to associate a range of
- * the local 32-bit address space with a particular target interface
- * such as PCI/PCI-X, RapidIO, Local Bus and DDR SDRAM.
- *
- * We put TLB1/LAW code here because memory mapping is board-specific
- * instead of cpu-specific.
- *
- * While these macros are all nominally for TLB1 by name, they can
- * also be used for TLB0 as well.
- */
-
-
-/*
- * Convert addresses to Effective and Real Page Numbers.
- * Grab the high 20-bits and shift 'em down, dropping the "byte offset".
- */
-#define E500_TLB_EPN(addr) (((addr) >> 12) & 0xfffff)
-#define E500_TLB_RPN(addr) (((addr) >> 12) & 0xfffff)
-
-
-/* MAS0
- * tlbsel(TLB Select):0,1
- * esel(Entry Select): 0,1,2,...,15 for TLB1
- * nv(Next victim):0,1
- */
-#define TLB1_MAS0(tlbsel,esel,nv) \
- ((((tlbsel) << 28) & MAS0_TLBSEL) |\
- (((esel) << 16) & MAS0_ESEL ) |\
- (nv) )
-
-
-/* MAS1
- * v(TLB valid bit):0,1
- * iprot(invalidate protect):0,1
- * tid(translation identity):8bit to match process IDs
- * ts(translation space,comparing with MSR[IS,DS]): 0,1
- * tsize(translation size):1,2,...,9(4K,16K,64K,256K,1M,4M,16M,64M,256M)
- */
-#define TLB1_MAS1(v,iprot,tid,ts,tsize) \
- ((((v) << 31) & MAS1_VALID) |\
- (((iprot) << 30) & MAS1_IPROT) |\
- (((tid) << 16) & MAS1_TID) |\
- (((ts) << 12) & MAS1_TS) |\
- (((tsize) << 8) & MAS1_TSIZE) )
-
-
-/* MAS2
- * epn(effective page number):20bits
- * sharen(Shared cache state):0,1
- * x0,x1(implementation specific page attribute):0,1
- * w,i,m,g,e(write-through,cache-inhibited,memory coherency,guarded,
- * endianness):0,1
- */
-#define TLB1_MAS2(epn,sharen,x0,x1,w,i,m,g,e) \
- ((((epn) << 12) & MAS2_EPN) |\
- (((sharen) << 9) & MAS2_SHAREN) |\
- (((x0) << 6) & MAS2_X0) |\
- (((x1) << 5) & MAS2_X1) |\
- (((w) << 4) & MAS2_W) |\
- (((i) << 3) & MAS2_I) |\
- (((m) << 2) & MAS2_M) |\
- (((g) << 1) & MAS2_G) |\
- (e) )
-
-
-/* MAS3
- * rpn(real page number):20bits
- * u0-u3(user bits, useful for page table management in OS):0,1
- * ux,sx,uw,sw,ur,sr(permission bits, user and supervisor read,
- * write,execute permission).
- */
-#define TLB1_MAS3(rpn,u0,u1,u2,u3,ux,sx,uw,sw,ur,sr) \
- ((((rpn) << 12) & MAS3_RPN) |\
- (((u0) << 9) & MAS3_U0) |\
- (((u1) << 8) & MAS3_U1) |\
- (((u2) << 7) & MAS3_U2) |\
- (((u3) << 6) & MAS3_U3) |\
- (((ux) << 5) & MAS3_UX) |\
- (((sx) << 4) & MAS3_SX) |\
- (((uw) << 3) & MAS3_UW) |\
- (((sw) << 2) & MAS3_SW) |\
- (((ur) << 1) & MAS3_UR) |\
- (sr) )
-
-
#define RESET_VECTOR 0xfffffffc
-#define CACHELINE_MASK (CFG_CACHELINE_SIZE - 1) /* Address mask for cache
- line aligned data. */
#endif /* __E500_H__ */
diff --git a/include/fdt_support.h b/include/fdt_support.h
index 58e26ab..7836f28 100644
--- a/include/fdt_support.h
+++ b/include/fdt_support.h
@@ -48,6 +48,7 @@ int fdt_fixup_memory(void *blob, u64 start, u64 size);
void fdt_fixup_ethernet(void *fdt, bd_t *bd);
int fdt_find_and_setprop(void *fdt, const char *node, const char *prop,
const void *val, int len, int create);
+void fdt_fixup_qe_firmware(void *fdt);
#ifdef CONFIG_OF_HAS_UBOOT_ENV
int fdt_env(void *fdt);