summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--board/freescale/mx7d_12x12_ddr3_arm2/mx7d_12x12_ddr3_arm2.c68
-rw-r--r--board/freescale/mx7d_19x19_ddr3_arm2/mx7d_19x19_ddr3_arm2.c64
-rw-r--r--include/configs/mx7d_12x12_ddr3_arm2.h9
-rw-r--r--include/configs/mx7d_12x12_lpddr3_arm2.h1
-rw-r--r--include/configs/mx7d_19x19_ddr3_arm2.h9
5 files changed, 58 insertions, 93 deletions
diff --git a/board/freescale/mx7d_12x12_ddr3_arm2/mx7d_12x12_ddr3_arm2.c b/board/freescale/mx7d_12x12_ddr3_arm2/mx7d_12x12_ddr3_arm2.c
index c7a9efe..225539a 100644
--- a/board/freescale/mx7d_12x12_ddr3_arm2/mx7d_12x12_ddr3_arm2.c
+++ b/board/freescale/mx7d_12x12_ddr3_arm2/mx7d_12x12_ddr3_arm2.c
@@ -18,6 +18,9 @@
#include <mmc.h>
#include <miiphy.h>
#include <netdev.h>
+#include <power/pmic.h>
+#include <power/pfuze300_pmic.h>
+#include "../common/pfuze.h"
#ifdef CONFIG_SYS_I2C_MXC
#include <i2c.h>
#include <asm/imx-common/mxc_i2c.h>
@@ -287,42 +290,31 @@ static const struct boot_mode board_boot_modes[] = {
};
#endif
-#ifdef CONFIG_PFUZE3000_PMIC_I2C
-#define PFUZE_DEVICEID 0x0
-#define PFUZE_REVID 0x3
-#define PFUZE_FABID 0x4
+#ifdef CONFIG_POWER
+#define I2C_PMIC 0
+int power_init_board(void)
+{
+ struct pmic *p;
+ int ret;
+ unsigned int reg, rev_id;
-#define PFUZE_LDOGCTL 0x69
+ ret = power_pfuze300_init(I2C_PMIC);
+ if (ret)
+ return ret;
-static int setup_pmic_voltages(void)
-{
- unsigned char value, rev_id = 0;
-
- i2c_set_bus_num(CONFIG_PMIC_I2C_BUS);
-
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_PMIC_I2C_SLAVE);
- if (!i2c_probe(CONFIG_PMIC_I2C_SLAVE)) {
- if (i2c_read(CONFIG_PMIC_I2C_SLAVE, PFUZE_DEVICEID, 1, &value, 1)) {
- printf("Read device ID error!\n");
- return -1;
- }
- if (i2c_read(CONFIG_PMIC_I2C_SLAVE, PFUZE_REVID, 1, &rev_id, 1)) {
- printf("Read Rev ID error!\n");
- return -1;
- }
- printf("Found PFUZE300! deviceid 0x%x, revid 0x%x\n", value, rev_id);
-
- /* disable Low Power Mode during standby mode */
- if (i2c_read(CONFIG_PMIC_I2C_SLAVE, PFUZE_LDOGCTL, 1, &value, 1)) {
- printf("Read LDOCTL error!\n");
- return -1;
- }
- value |= 0x1;
- if (i2c_write(CONFIG_PMIC_I2C_SLAVE, PFUZE_LDOGCTL, 1, &value, 1)) {
- printf("Set LDOCTL error!\n");
- return -1;
- }
- }
+ p = pmic_get("PFUZE300");
+ ret = pmic_probe(p);
+ if (ret)
+ return ret;
+
+ pmic_reg_read(p, PFUZE300_DEVICEID, &reg);
+ pmic_reg_read(p, PFUZE300_REVID, &rev_id);
+ printf("PMIC: PFUZE300 DEV_ID=0x%x REV_ID=0x%x\n", reg, rev_id);
+
+ /* disable Low Power Mode during standby mode */
+ pmic_reg_read(p, PFUZE300_LDOGCTL, &reg);
+ reg |= 0x1;
+ pmic_reg_write(p, PFUZE300_LDOGCTL, reg);
return 0;
}
@@ -334,14 +326,6 @@ int board_late_init(void)
add_board_boot_modes(board_boot_modes);
#endif
-#ifdef CONFIG_PFUZE3000_PMIC_I2C
- int ret = 0;
-
- ret = setup_pmic_voltages();
- if (ret)
- return ret;
-#endif
-
#ifdef CONFIG_ENV_IS_IN_MMC
board_late_mmc_init();
#endif
diff --git a/board/freescale/mx7d_19x19_ddr3_arm2/mx7d_19x19_ddr3_arm2.c b/board/freescale/mx7d_19x19_ddr3_arm2/mx7d_19x19_ddr3_arm2.c
index b3b4152..a746cc9 100644
--- a/board/freescale/mx7d_19x19_ddr3_arm2/mx7d_19x19_ddr3_arm2.c
+++ b/board/freescale/mx7d_19x19_ddr3_arm2/mx7d_19x19_ddr3_arm2.c
@@ -18,6 +18,9 @@
#include <mmc.h>
#include <miiphy.h>
#include <netdev.h>
+#include <power/pmic.h>
+#include <power/pfuze300_pmic.h>
+#include "../common/pfuze.h"
#ifdef CONFIG_SYS_I2C_MXC
#include <i2c.h>
#include <asm/imx-common/mxc_i2c.h>
@@ -597,42 +600,31 @@ static const struct boot_mode board_boot_modes[] = {
};
#endif
-#ifdef CONFIG_PFUZE3000_PMIC_I2C
-#define PFUZE_DEVICEID 0x0
-#define PFUZE_REVID 0x3
-#define PFUZE_FABID 0x4
-
-#define PFUZE_LDOGCTL 0x69
-
-static int setup_pmic_voltages(void)
+#ifdef CONFIG_POWER
+#define I2C_PMIC 0
+int power_init_board(void)
{
- unsigned char value, rev_id = 0;
+ struct pmic *p;
+ int ret;
+ unsigned int reg, rev_id;
- i2c_set_bus_num(CONFIG_PMIC_I2C_BUS);
+ ret = power_pfuze300_init(I2C_PMIC);
+ if (ret)
+ return ret;
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_PMIC_I2C_SLAVE);
- if (!i2c_probe(CONFIG_PMIC_I2C_SLAVE)) {
- if (i2c_read(CONFIG_PMIC_I2C_SLAVE, PFUZE_DEVICEID, 1, &value, 1)) {
- printf("Read device ID error!\n");
- return -1;
- }
- if (i2c_read(CONFIG_PMIC_I2C_SLAVE, PFUZE_REVID, 1, &rev_id, 1)) {
- printf("Read Rev ID error!\n");
- return -1;
- }
- printf("Found PFUZE300! deviceid 0x%x, revid 0x%x\n", value, rev_id);
+ p = pmic_get("PFUZE300");
+ ret = pmic_probe(p);
+ if (ret)
+ return ret;
- /* disable Low Power Mode during standby mode */
- if (i2c_read(CONFIG_PMIC_I2C_SLAVE, PFUZE_LDOGCTL, 1, &value, 1)) {
- printf("Read LDOCTL error!\n");
- return -1;
- }
- value |= 0x1;
- if (i2c_write(CONFIG_PMIC_I2C_SLAVE, PFUZE_LDOGCTL, 1, &value, 1)) {
- printf("Set LDOCTL error!\n");
- return -1;
- }
- }
+ pmic_reg_read(p, PFUZE300_DEVICEID, &reg);
+ pmic_reg_read(p, PFUZE300_REVID, &rev_id);
+ printf("PMIC: PFUZE300 DEV_ID=0x%x REV_ID=0x%x\n", reg, rev_id);
+
+ /* disable Low Power Mode during standby mode */
+ pmic_reg_read(p, PFUZE300_LDOGCTL, &reg);
+ reg |= 0x1;
+ pmic_reg_write(p, PFUZE300_LDOGCTL, reg);
return 0;
}
@@ -644,14 +636,6 @@ int board_late_init(void)
add_board_boot_modes(board_boot_modes);
#endif
-#ifdef CONFIG_PFUZE3000_PMIC_I2C
- int ret = 0;
-
- ret = setup_pmic_voltages();
- if (ret)
- return ret;
-#endif
-
#ifdef CONFIG_ENV_IS_IN_MMC
board_late_mmc_init();
#endif
diff --git a/include/configs/mx7d_12x12_ddr3_arm2.h b/include/configs/mx7d_12x12_ddr3_arm2.h
index b6c07db..5ff3625 100644
--- a/include/configs/mx7d_12x12_ddr3_arm2.h
+++ b/include/configs/mx7d_12x12_ddr3_arm2.h
@@ -33,11 +33,10 @@
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_SPEED 100000
/* PMIC */
-#define CONFIG_PFUZE3000_PMIC_I2C
-#ifdef CONFIG_PFUZE3000_PMIC_I2C
-#define CONFIG_PMIC_I2C_BUS 0
-#define CONFIG_PMIC_I2C_SLAVE 0x8
-#endif
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_PFUZE300
+#define CONFIG_POWER_PFUZE300_I2C_ADDR 0x08
#endif
#ifdef CONFIG_SYS_USE_SPINOR
diff --git a/include/configs/mx7d_12x12_lpddr3_arm2.h b/include/configs/mx7d_12x12_lpddr3_arm2.h
index ece93b1..1ad45c1 100644
--- a/include/configs/mx7d_12x12_lpddr3_arm2.h
+++ b/include/configs/mx7d_12x12_lpddr3_arm2.h
@@ -45,7 +45,6 @@
#endif
/* PMIC */
-/* PMIC */
#define CONFIG_POWER
#define CONFIG_POWER_I2C
#define CONFIG_POWER_PFUZE300
diff --git a/include/configs/mx7d_19x19_ddr3_arm2.h b/include/configs/mx7d_19x19_ddr3_arm2.h
index dddc248..d855d00 100644
--- a/include/configs/mx7d_19x19_ddr3_arm2.h
+++ b/include/configs/mx7d_19x19_ddr3_arm2.h
@@ -53,11 +53,10 @@
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_SPEED 100000
/* PMIC */
-#define CONFIG_PFUZE3000_PMIC_I2C
-#ifdef CONFIG_PFUZE3000_PMIC_I2C
-#define CONFIG_PMIC_I2C_BUS 0
-#define CONFIG_PMIC_I2C_SLAVE 0x8
-#endif
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_PFUZE300
+#define CONFIG_POWER_PFUZE300_I2C_ADDR 0x08
#endif
#ifdef CONFIG_SYS_USE_SPINOR