summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--common/cmd_i2c.c376
1 files changed, 323 insertions, 53 deletions
diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c
index c266b88..22db1bb 100644
--- a/common/cmd_i2c.c
+++ b/common/cmd_i2c.c
@@ -69,8 +69,10 @@
#include <bootretry.h>
#include <cli.h>
#include <command.h>
+#include <dm.h>
#include <edid.h>
#include <environment.h>
+#include <errno.h>
#include <i2c.h>
#include <malloc.h>
#include <asm/byteorder.h>
@@ -117,6 +119,60 @@ static uchar i2c_no_probes[] = CONFIG_SYS_I2C_NOPROBES;
#define DISP_LINE_LEN 16
+/*
+ * Default for driver model is to use the chip's existing address length.
+ * For legacy code, this is not stored, so we need to use a suitable
+ * default.
+ */
+#ifdef CONFIG_DM_I2C
+#define DEFAULT_ADDR_LEN (-1)
+#else
+#define DEFAULT_ADDR_LEN 1
+#endif
+
+#ifdef CONFIG_DM_I2C
+static struct udevice *i2c_cur_bus;
+
+static int i2c_set_bus_num(unsigned int busnum)
+{
+ struct udevice *bus;
+ int ret;
+
+ ret = uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus);
+ if (ret) {
+ debug("%s: No bus %d\n", __func__, busnum);
+ return ret;
+ }
+ i2c_cur_bus = bus;
+
+ return 0;
+}
+
+static int i2c_get_cur_bus(struct udevice **busp)
+{
+ if (!i2c_cur_bus) {
+ puts("No I2C bus selected\n");
+ return -ENODEV;
+ }
+ *busp = i2c_cur_bus;
+
+ return 0;
+}
+
+static int i2c_get_cur_bus_chip(uint chip_addr, struct udevice **devp)
+{
+ struct udevice *bus;
+ int ret;
+
+ ret = i2c_get_cur_bus(&bus);
+ if (ret)
+ return ret;
+
+ return i2c_get_chip(bus, chip_addr, devp);
+}
+
+#endif
+
/**
* i2c_init_board() - Board-specific I2C bus init
*
@@ -143,7 +199,7 @@ void i2c_init_board(void)
*
* Returns I2C bus speed in Hz.
*/
-#if !defined(CONFIG_SYS_I2C)
+#if !defined(CONFIG_SYS_I2C) && !defined(CONFIG_DM_I2C)
/*
* TODO: Implement architecture-specific get/set functions
* Should go away, if we switched completely to new multibus support
@@ -182,12 +238,12 @@ int i2c_set_bus_speed(unsigned int speed)
*
* Returns the address length.
*/
-static uint get_alen(char *arg)
+static uint get_alen(char *arg, int default_len)
{
int j;
int alen;
- alen = 1;
+ alen = default_len;
for (j = 0; j < 8; j++) {
if (arg[j] == '.') {
alen = arg[j+1] - '0';
@@ -227,8 +283,13 @@ static int i2c_report_err(int ret, enum i2c_err_op op)
static int do_i2c_read ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
u_char chip;
- uint devaddr, alen, length;
+ uint devaddr, length;
+ int alen;
u_char *memaddr;
+ int ret;
+#ifdef CONFIG_DM_I2C
+ struct udevice *dev;
+#endif
if (argc != 5)
return CMD_RET_USAGE;
@@ -243,7 +304,7 @@ static int do_i2c_read ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv
* 2 bytes long. Some day it might be 3 bytes long :-).
*/
devaddr = simple_strtoul(argv[2], NULL, 16);
- alen = get_alen(argv[2]);
+ alen = get_alen(argv[2], DEFAULT_ADDR_LEN);
if (alen > 3)
return CMD_RET_USAGE;
@@ -257,18 +318,31 @@ static int do_i2c_read ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv
*/
memaddr = (u_char *)simple_strtoul(argv[4], NULL, 16);
- if (i2c_read(chip, devaddr, alen, memaddr, length) != 0) {
- i2c_report_err(-1, I2C_ERR_READ);
- return 1;
- }
+#ifdef CONFIG_DM_I2C
+ ret = i2c_get_cur_bus_chip(chip, &dev);
+ if (!ret && alen != -1)
+ ret = i2c_set_chip_offset_len(dev, alen);
+ if (!ret)
+ ret = i2c_read(dev, devaddr, memaddr, length);
+#else
+ ret = i2c_read(chip, devaddr, alen, memaddr, length);
+#endif
+ if (ret)
+ return i2c_report_err(ret, I2C_ERR_READ);
+
return 0;
}
static int do_i2c_write(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
u_char chip;
- uint devaddr, alen, length;
+ uint devaddr, length;
+ int alen;
u_char *memaddr;
+ int ret;
+#ifdef CONFIG_DM_I2C
+ struct udevice *dev;
+#endif
if (argc != 5)
return cmd_usage(cmdtp);
@@ -288,7 +362,7 @@ static int do_i2c_write(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[
* 2 bytes long. Some day it might be 3 bytes long :-).
*/
devaddr = simple_strtoul(argv[3], NULL, 16);
- alen = get_alen(argv[3]);
+ alen = get_alen(argv[3], DEFAULT_ADDR_LEN);
if (alen > 3)
return cmd_usage(cmdtp);
@@ -297,10 +371,22 @@ static int do_i2c_write(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[
*/
length = simple_strtoul(argv[4], NULL, 16);
+#ifdef CONFIG_DM_I2C
+ ret = i2c_get_cur_bus_chip(chip, &dev);
+ if (!ret && alen != -1)
+ ret = i2c_set_chip_offset_len(dev, alen);
+ if (ret)
+ return i2c_report_err(ret, I2C_ERR_WRITE);
+#endif
+
while (length-- > 0) {
- if (i2c_write(chip, devaddr++, alen, memaddr++, 1) != 0) {
- return i2c_report_err(-1, I2C_ERR_WRITE);
- }
+#ifdef CONFIG_DM_I2C
+ ret = i2c_write(dev, devaddr++, memaddr++, 1);
+#else
+ ret = i2c_write(chip, devaddr++, alen, memaddr++, 1);
+#endif
+ if (ret)
+ return i2c_report_err(ret, I2C_ERR_WRITE);
/*
* No write delay with FRAM devices.
*/
@@ -311,6 +397,38 @@ static int do_i2c_write(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[
return 0;
}
+#ifdef CONFIG_DM_I2C
+static int do_i2c_flags(cmd_tbl_t *cmdtp, int flag, int argc,
+ char *const argv[])
+{
+ struct udevice *dev;
+ uint flags;
+ int chip;
+ int ret;
+
+ if (argc < 2)
+ return CMD_RET_USAGE;
+
+ chip = simple_strtoul(argv[1], NULL, 16);
+ ret = i2c_get_cur_bus_chip(chip, &dev);
+ if (ret)
+ return i2c_report_err(ret, I2C_ERR_READ);
+
+ if (argc > 2) {
+ flags = simple_strtoul(argv[2], NULL, 16);
+ ret = i2c_set_chip_flags(dev, flags);
+ } else {
+ ret = i2c_get_chip_flags(dev, &flags);
+ if (!ret)
+ printf("%x\n", flags);
+ }
+ if (ret)
+ return i2c_report_err(ret, I2C_ERR_READ);
+
+ return 0;
+}
+#endif
+
/**
* do_i2c_md() - Handle the "i2c md" command-line command
* @cmdtp: Command data struct pointer
@@ -327,8 +445,13 @@ static int do_i2c_write(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[
static int do_i2c_md ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
u_char chip;
- uint addr, alen, length;
+ uint addr, length;
+ int alen;
int j, nbytes, linebytes;
+ int ret;
+#ifdef CONFIG_DM_I2C
+ struct udevice *dev;
+#endif
/* We use the last specified parameters, unless new ones are
* entered.
@@ -356,7 +479,7 @@ static int do_i2c_md ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]
* 2 bytes long. Some day it might be 3 bytes long :-).
*/
addr = simple_strtoul(argv[2], NULL, 16);
- alen = get_alen(argv[2]);
+ alen = get_alen(argv[2], DEFAULT_ADDR_LEN);
if (alen > 3)
return CMD_RET_USAGE;
@@ -368,6 +491,14 @@ static int do_i2c_md ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]
length = simple_strtoul(argv[3], NULL, 16);
}
+#ifdef CONFIG_DM_I2C
+ ret = i2c_get_cur_bus_chip(chip, &dev);
+ if (!ret && alen != -1)
+ ret = i2c_set_chip_offset_len(dev, alen);
+ if (ret)
+ return i2c_report_err(ret, I2C_ERR_READ);
+#endif
+
/*
* Print the lines.
*
@@ -381,8 +512,13 @@ static int do_i2c_md ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]
linebytes = (nbytes > DISP_LINE_LEN) ? DISP_LINE_LEN : nbytes;
- if (i2c_read(chip, addr, alen, linebuf, linebytes) != 0)
- i2c_report_err(-1, I2C_ERR_READ);
+#ifdef CONFIG_DM_I2C
+ ret = i2c_read(dev, addr, linebuf, linebytes);
+#else
+ ret = i2c_read(chip, addr, alen, linebuf, linebytes);
+#endif
+ if (ret)
+ i2c_report_err(ret, I2C_ERR_READ);
else {
printf("%04x:", addr);
cp = linebuf;
@@ -429,9 +565,13 @@ static int do_i2c_mw ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]
{
uchar chip;
ulong addr;
- uint alen;
+ int alen;
uchar byte;
int count;
+ int ret;
+#ifdef CONFIG_DM_I2C
+ struct udevice *dev;
+#endif
if ((argc < 4) || (argc > 5))
return CMD_RET_USAGE;
@@ -445,10 +585,17 @@ static int do_i2c_mw ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]
* Address is always specified.
*/
addr = simple_strtoul(argv[2], NULL, 16);
- alen = get_alen(argv[2]);
+ alen = get_alen(argv[2], DEFAULT_ADDR_LEN);
if (alen > 3)
return CMD_RET_USAGE;
+#ifdef CONFIG_DM_I2C
+ ret = i2c_get_cur_bus_chip(chip, &dev);
+ if (!ret && alen != -1)
+ ret = i2c_set_chip_offset_len(dev, alen);
+ if (ret)
+ return i2c_report_err(ret, I2C_ERR_WRITE);
+#endif
/*
* Value to write is always specified.
*/
@@ -463,8 +610,13 @@ static int do_i2c_mw ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]
count = 1;
while (count-- > 0) {
- if (i2c_write(chip, addr++, alen, &byte, 1) != 0)
- i2c_report_err(-1, I2C_ERR_WRITE);
+#ifdef CONFIG_DM_I2C
+ ret = i2c_write(dev, addr++, &byte, 1);
+#else
+ ret = i2c_write(chip, addr++, alen, &byte, 1);
+#endif
+ if (ret)
+ i2c_report_err(ret, I2C_ERR_WRITE);
/*
* Wait for the write to complete. The write can take
* up to 10mSec (we allow a little more time).
@@ -499,11 +651,15 @@ static int do_i2c_crc (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]
{
uchar chip;
ulong addr;
- uint alen;
+ int alen;
int count;
uchar byte;
ulong crc;
ulong err;
+ int ret = 0;
+#ifdef CONFIG_DM_I2C
+ struct udevice *dev;
+#endif
if (argc < 4)
return CMD_RET_USAGE;
@@ -517,10 +673,17 @@ static int do_i2c_crc (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]
* Address is always specified.
*/
addr = simple_strtoul(argv[2], NULL, 16);
- alen = get_alen(argv[2]);
+ alen = get_alen(argv[2], DEFAULT_ADDR_LEN);
if (alen > 3)
return CMD_RET_USAGE;
+#ifdef CONFIG_DM_I2C
+ ret = i2c_get_cur_bus_chip(chip, &dev);
+ if (!ret && alen != -1)
+ ret = i2c_set_chip_offset_len(dev, alen);
+ if (ret)
+ return i2c_report_err(ret, I2C_ERR_READ);
+#endif
/*
* Count is always specified
*/
@@ -534,13 +697,18 @@ static int do_i2c_crc (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]
crc = 0;
err = 0;
while (count-- > 0) {
- if (i2c_read(chip, addr, alen, &byte, 1) != 0)
+#ifdef CONFIG_DM_I2C
+ ret = i2c_read(dev, addr, &byte, 1);
+#else
+ ret = i2c_read(chip, addr, alen, &byte, 1);
+#endif
+ if (ret)
err++;
crc = crc32 (crc, &byte, 1);
addr++;
}
if (err > 0)
- i2c_report_err(-1, I2C_ERR_READ);
+ i2c_report_err(ret, I2C_ERR_READ);
else
printf ("%08lx\n", crc);
@@ -568,10 +736,14 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const arg
{
uchar chip;
ulong addr;
- uint alen;
+ int alen;
ulong data;
int size = 1;
int nbytes;
+ int ret;
+#ifdef CONFIG_DM_I2C
+ struct udevice *dev;
+#endif
if (argc != 3)
return CMD_RET_USAGE;
@@ -601,19 +773,32 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const arg
* Address is always specified.
*/
addr = simple_strtoul(argv[2], NULL, 16);
- alen = get_alen(argv[2]);
+ alen = get_alen(argv[2], DEFAULT_ADDR_LEN);
if (alen > 3)
return CMD_RET_USAGE;
}
+#ifdef CONFIG_DM_I2C
+ ret = i2c_get_cur_bus_chip(chip, &dev);
+ if (!ret && alen != -1)
+ ret = i2c_set_chip_offset_len(dev, alen);
+ if (ret)
+ return i2c_report_err(ret, I2C_ERR_WRITE);
+#endif
+
/*
* Print the address, followed by value. Then accept input for
* the next value. A non-converted value exits.
*/
do {
printf("%08lx:", addr);
- if (i2c_read(chip, addr, alen, (uchar *)&data, size) != 0)
- i2c_report_err(-1, I2C_ERR_READ);
+#ifdef CONFIG_DM_I2C
+ ret = i2c_read(dev, addr, (uchar *)&data, size);
+#else
+ ret = i2c_read(chip, addr, alen, (uchar *)&data, size);
+#endif
+ if (ret)
+ i2c_report_err(ret, I2C_ERR_READ);
else {
data = cpu_to_be32(data);
if (size == 1)
@@ -655,8 +840,15 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const arg
* good enough to not time out
*/
bootretry_reset_cmd_timeout();
- if (i2c_write(chip, addr, alen, (uchar *)&data, size) != 0)
- i2c_report_err(-1, I2C_ERR_WRITE);
+#ifdef CONFIG_DM_I2C
+ ret = i2c_write(dev, addr, (uchar *)&data,
+ size);
+#else
+ ret = i2c_write(chip, addr, alen,
+ (uchar *)&data, size);
+#endif
+ if (ret)
+ i2c_report_err(ret, I2C_ERR_WRITE);
#ifdef CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS
udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
#endif
@@ -697,6 +889,13 @@ static int do_i2c_probe (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv
int k, skip;
unsigned int bus = GET_BUS_NUM;
#endif /* NOPROBES */
+ int ret;
+#ifdef CONFIG_DM_I2C
+ struct udevice *bus, *dev;
+
+ if (i2c_get_cur_bus(&bus))
+ return CMD_RET_FAILURE;
+#endif
if (argc == 2)
addr = simple_strtol(argv[1], 0, 16);
@@ -717,7 +916,12 @@ static int do_i2c_probe (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv
if (skip)
continue;
#endif
- if (i2c_probe(j) == 0) {
+#ifdef CONFIG_DM_I2C
+ ret = i2c_probe(bus, j, 0, &dev);
+#else
+ ret = i2c_probe(j);
+#endif
+ if (ret == 0) {
printf(" %02X", j);
found++;
}
@@ -754,11 +958,15 @@ static int do_i2c_probe (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv
static int do_i2c_loop(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
u_char chip;
- ulong alen;
+ int alen;
uint addr;
uint length;
u_char bytes[16];
int delay;
+ int ret;
+#ifdef CONFIG_DM_I2C
+ struct udevice *dev;
+#endif
if (argc < 3)
return CMD_RET_USAGE;
@@ -772,9 +980,16 @@ static int do_i2c_loop(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]
* Address is always specified.
*/
addr = simple_strtoul(argv[2], NULL, 16);
- alen = get_alen(argv[2]);
+ alen = get_alen(argv[2], DEFAULT_ADDR_LEN);
if (alen > 3)
return CMD_RET_USAGE;
+#ifdef CONFIG_DM_I2C
+ ret = i2c_get_cur_bus_chip(chip, &dev);
+ if (!ret && alen != -1)
+ ret = i2c_set_chip_offset_len(dev, alen);
+ if (ret)
+ return i2c_report_err(ret, I2C_ERR_WRITE);
+#endif
/*
* Length is the number of objects, not number of bytes.
@@ -794,8 +1009,13 @@ static int do_i2c_loop(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]
* Run the loop...
*/
while (1) {
- if (i2c_read(chip, addr, alen, bytes, length) != 0)
- i2c_report_err(-1, I2C_ERR_READ);
+#ifdef CONFIG_DM_I2C
+ ret = i2c_read(dev, addr, bytes, length);
+#else
+ ret = i2c_read(chip, addr, alen, bytes, length);
+#endif
+ if (ret)
+ i2c_report_err(ret, I2C_ERR_READ);
udelay(delay);
}
@@ -1345,6 +1565,10 @@ int do_edid(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
{
u_char chip;
struct edid1_info edid;
+ int ret;
+#ifdef CONFIG_DM_I2C
+ struct udevice *dev;
+#endif
if (argc < 2) {
cmd_usage(cmdtp);
@@ -1352,10 +1576,15 @@ int do_edid(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
}
chip = simple_strtoul(argv[1], NULL, 16);
- if (i2c_read(chip, 0, 1, (uchar *)&edid, sizeof(edid)) != 0) {
- i2c_report_err(-1, I2C_ERR_READ);
- return 1;
- }
+#ifdef CONFIG_DM_I2C
+ ret = i2c_get_cur_bus_chip(chip, &dev);
+ if (!ret)
+ ret = i2c_read(dev, 0, (uchar *)&edid, sizeof(edid));
+#else
+ ret = i2c_read(chip, 0, 1, (uchar *)&edid, sizeof(edid));
+#endif
+ if (ret)
+ return i2c_report_err(ret, I2C_ERR_READ);
if (edid_check_info(&edid)) {
puts("Content isn't valid EDID.\n");
@@ -1437,17 +1666,28 @@ static int do_i2c_show_bus(cmd_tbl_t *cmdtp, int flag, int argc,
* Returns zero on success, CMD_RET_USAGE in case of misuse and negative
* on error.
*/
-#if defined(CONFIG_SYS_I2C) || defined(CONFIG_I2C_MULTI_BUS)
+#if defined(CONFIG_SYS_I2C) || defined(CONFIG_I2C_MULTI_BUS) || \
+ defined(CONFIG_DM_I2C)
static int do_i2c_bus_num(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[])
{
int ret = 0;
- unsigned int bus_no;
+ int bus_no;
- if (argc == 1)
+ if (argc == 1) {
/* querying current setting */
- printf("Current bus is %d\n", i2c_get_bus_num());
- else {
+#ifdef CONFIG_DM_I2C
+ struct udevice *bus;
+
+ if (!i2c_get_cur_bus(&bus))
+ bus_no = bus->seq;
+ else
+ bus_no = -1;
+#else
+ bus_no = i2c_get_bus_num();
+#endif
+ printf("Current bus is %d\n", bus_no);
+ } else {
bus_no = simple_strtoul(argv[1], NULL, 10);
#if defined(CONFIG_SYS_I2C)
if (bus_no >= CONFIG_SYS_NUM_I2C_BUSES) {
@@ -1478,13 +1718,28 @@ static int do_i2c_bus_speed(cmd_tbl_t * cmdtp, int flag, int argc, char * const
{
int speed, ret=0;
- if (argc == 1)
+#ifdef CONFIG_DM_I2C
+ struct udevice *bus;
+
+ if (i2c_get_cur_bus(&bus))
+ return 1;
+#endif
+ if (argc == 1) {
+#ifdef CONFIG_DM_I2C
+ speed = i2c_get_bus_speed(bus);
+#else
+ speed = i2c_get_bus_speed();
+#endif
/* querying current speed */
- printf("Current bus speed=%d\n", i2c_get_bus_speed());
- else {
+ printf("Current bus speed=%d\n", speed);
+ } else {
speed = simple_strtoul(argv[1], NULL, 10);
printf("Setting bus speed to %d Hz\n", speed);
+#ifdef CONFIG_DM_I2C
+ ret = i2c_set_bus_speed(bus, speed);
+#else
ret = i2c_set_bus_speed(speed);
+#endif
if (ret)
printf("Failure changing bus speed (%d)\n", ret);
}
@@ -1532,7 +1787,16 @@ static int do_i2c_nm(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
*/
static int do_i2c_reset(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
{
-#if defined(CONFIG_SYS_I2C)
+#if defined(CONFIG_DM_I2C)
+ struct udevice *bus;
+
+ if (i2c_get_cur_bus(&bus))
+ return CMD_RET_FAILURE;
+ if (i2c_deblock(bus)) {
+ printf("Error: Not supported by the driver\n");
+ return CMD_RET_FAILURE;
+ }
+#elif defined(CONFIG_SYS_I2C)
i2c_init(I2C_ADAP->speed, I2C_ADAP->slaveaddr);
#else
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
@@ -1546,7 +1810,7 @@ static cmd_tbl_t cmd_i2c_sub[] = {
#endif
U_BOOT_CMD_MKENT(crc32, 3, 1, do_i2c_crc, "", ""),
#if defined(CONFIG_SYS_I2C) || \
- defined(CONFIG_I2C_MULTI_BUS)
+ defined(CONFIG_I2C_MULTI_BUS) || defined(CONFIG_DM_I2C)
U_BOOT_CMD_MKENT(dev, 1, 1, do_i2c_bus_num, "", ""),
#endif /* CONFIG_I2C_MULTI_BUS */
#if defined(CONFIG_I2C_EDID)
@@ -1560,6 +1824,9 @@ static cmd_tbl_t cmd_i2c_sub[] = {
U_BOOT_CMD_MKENT(probe, 0, 1, do_i2c_probe, "", ""),
U_BOOT_CMD_MKENT(read, 5, 1, do_i2c_read, "", ""),
U_BOOT_CMD_MKENT(write, 5, 0, do_i2c_write, "", ""),
+#ifdef CONFIG_DM_I2C
+ U_BOOT_CMD_MKENT(flags, 2, 1, do_i2c_flags, "", ""),
+#endif
U_BOOT_CMD_MKENT(reset, 0, 1, do_i2c_reset, "", ""),
#if defined(CONFIG_CMD_SDRAM)
U_BOOT_CMD_MKENT(sdram, 1, 1, do_sdram, "", ""),
@@ -1610,7 +1877,7 @@ static char i2c_help_text[] =
#endif
"crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n"
#if defined(CONFIG_SYS_I2C) || \
- defined(CONFIG_I2C_MULTI_BUS)
+ defined(CONFIG_I2C_MULTI_BUS) || defined(CONFIG_DM_I2C)
"i2c dev [dev] - show or set current I2C bus\n"
#endif /* CONFIG_I2C_MULTI_BUS */
#if defined(CONFIG_I2C_EDID)
@@ -1622,8 +1889,11 @@ static char i2c_help_text[] =
"i2c mw chip address[.0, .1, .2] value [count] - write to I2C device (fill)\n"
"i2c nm chip address[.0, .1, .2] - write to I2C device (constant address)\n"
"i2c probe [address] - test for and show device(s) on the I2C bus\n"
- "i2c read chip address[.0, .1, .2] length memaddress - read to memory \n"
+ "i2c read chip address[.0, .1, .2] length memaddress - read to memory\n"
"i2c write memaddress chip address[.0, .1, .2] length - write memory to i2c\n"
+#ifdef CONFIG_DM_I2C
+ "i2c flags chip [flags] - set or get chip flags\n"
+#endif
"i2c reset - re-init the I2C Controller\n"
#if defined(CONFIG_CMD_SDRAM)
"i2c sdram chip - print SDRAM configuration information\n"