summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/x86/Kconfig13
-rw-r--r--arch/x86/cpu/queensbay/Kconfig79
-rw-r--r--board/intel/crownbay/Kconfig20
3 files changed, 112 insertions, 0 deletions
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index fdfb618..ebf72b3 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -32,6 +32,15 @@ config TARGET_CHROMEBOOK_LINK
and it provides a 2560x1700 high resolution touch-enabled LCD
display.
+config TARGET_CROWNBAY
+ bool "Support Intel Crown Bay CRB"
+ help
+ This is the Intel Crown Bay Customer Reference Board. It contains
+ the Intel Atom Processor E6xx populated on the COM Express module
+ with 1GB DDR2 soldered down memory and a carrier board with the
+ Intel Platform Controller Hub EG20T, other system components and
+ peripheral connectors for PCIe/SATA/USB/LAN/SD/UART/Audio/LVDS.
+
endchoice
config RAMBASE
@@ -310,8 +319,12 @@ endmenu
source "arch/x86/cpu/ivybridge/Kconfig"
+source "arch/x86/cpu/queensbay/Kconfig"
+
source "board/coreboot/coreboot/Kconfig"
source "board/google/chromebook_link/Kconfig"
+source "board/intel/crownbay/Kconfig"
+
endmenu
diff --git a/arch/x86/cpu/queensbay/Kconfig b/arch/x86/cpu/queensbay/Kconfig
new file mode 100644
index 0000000..56fe85c
--- /dev/null
+++ b/arch/x86/cpu/queensbay/Kconfig
@@ -0,0 +1,79 @@
+#
+# Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+config INTEL_QUEENSBAY
+ bool
+ select HAVE_FSP
+ select HAVE_CMC
+
+if INTEL_QUEENSBAY
+
+config HAVE_FSP
+ bool "Add an Firmware Support Package binary"
+ help
+ Select this option to add an Firmware Support Package binary to
+ the resulting U-Boot image. It is a binary blob which U-Boot uses
+ to set up SDRAM and other chipset specific initialization.
+
+ Note: Without this binary U-Boot will not be able to set up its
+ SDRAM so will not boot.
+
+config FSP_FILE
+ string "Firmware Support Package binary filename"
+ depends on HAVE_FSP
+ default "fsp.bin"
+ help
+ The filename of the file to use as Firmware Support Package binary
+ in the board directory.
+
+config FSP_LOCATION
+ hex "Firmware Support Package binary location"
+ depends on HAVE_FSP
+ default 0xfffc0000
+ help
+ FSP is not Position Independent Code (PIC) and the whole FSP has to
+ be rebased if it is placed at a location which is different from the
+ perferred base address specified during the FSP build. Use Intel's
+ Binary Configuration Tool (BCT) to do the rebase.
+
+ The default base address of 0xfffc0000 indicates that the binary must
+ be located at offset 0xc0000 from the beginning of a 1MB flash device.
+
+config FSP_TEMP_RAM_ADDR
+ hex
+ default 0x2000000
+ help
+ Stack top address which is used in FspInit after DRAM is ready and
+ CAR is disabled.
+
+config HAVE_CMC
+ bool "Add a Chipset Micro Code state machine binary"
+ help
+ Select this option to add a Chipset Micro Code state machine binary
+ to the resulting U-Boot image. It is a 64K data block of machine
+ specific code which must be put in the flash for the processor to
+ access when powered up before system BIOS is executed.
+
+config CMC_FILE
+ string "Chipset Micro Code state machine filename"
+ depends on HAVE_CMC
+ default "cmc.bin"
+ help
+ The filename of the file to use as Chipset Micro Code state machine
+ binary in the board directory.
+
+config CMC_LOCATION
+ hex "Chipset Micro Code state machine binary location"
+ depends on HAVE_CMC
+ default 0xfffb0000
+ help
+ The location of the CMC binary is determined by a strap. It must be
+ put in flash at a location matching the strap-determined base address.
+
+ The default base address of 0xfffb0000 indicates that the binary must
+ be located at offset 0xb0000 from the beginning of a 1MB flash device.
+
+endif
diff --git a/board/intel/crownbay/Kconfig b/board/intel/crownbay/Kconfig
new file mode 100644
index 0000000..4709f9b
--- /dev/null
+++ b/board/intel/crownbay/Kconfig
@@ -0,0 +1,20 @@
+if TARGET_CROWNBAY
+
+config SYS_BOARD
+ default "crownbay"
+
+config SYS_VENDOR
+ default "intel"
+
+config SYS_SOC
+ default "queensbay"
+
+config SYS_CONFIG_NAME
+ default "crownbay"
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+ def_bool y
+ select INTEL_QUEENSBAY
+ select BOARD_ROMSIZE_KB_1024
+
+endif