diff options
| -rw-r--r-- | board/amcc/ocotea/init.S | 82 | ||||
| -rw-r--r-- | cpu/ppc4xx/44x_spd_ddr.c | 31 | ||||
| -rw-r--r-- | include/configs/ocotea.h | 3 |
3 files changed, 48 insertions, 68 deletions
diff --git a/board/amcc/ocotea/init.S b/board/amcc/ocotea/init.S index 7e0b132..d211c71 100644 --- a/board/amcc/ocotea/init.S +++ b/board/amcc/ocotea/init.S @@ -22,55 +22,7 @@ #include <ppc_asm.tmpl> #include <config.h> - -/* General */ -#define TLB_VALID 0x00000200 -#define _256M 0x10000000 - -/* Supported page sizes */ - -#define SZ_1K 0x00000000 -#define SZ_4K 0x00000010 -#define SZ_16K 0x00000020 -#define SZ_64K 0x00000030 -#define SZ_256K 0x00000040 -#define SZ_1M 0x00000050 -#define SZ_8M 0x00000060 -#define SZ_16M 0x00000070 -#define SZ_256M 0x00000090 - -/* Storage attributes */ -#define SA_W 0x00000800 /* Write-through */ -#define SA_I 0x00000400 /* Caching inhibited */ -#define SA_M 0x00000200 /* Memory coherence */ -#define SA_G 0x00000100 /* Guarded */ -#define SA_E 0x00000080 /* Endian */ - -/* Access control */ -#define AC_X 0x00000024 /* Execute */ -#define AC_W 0x00000012 /* Write */ -#define AC_R 0x00000009 /* Read */ - -/* Some handy macros */ - -#define EPN(e) ((e) & 0xfffffc00) -#define TLB0(epn,sz) ( (EPN((epn)) | (sz) | TLB_VALID ) ) -#define TLB1(rpn,erpn) ( ((rpn)&0xfffffc00) | (erpn) ) -#define TLB2(a) ( (a)&0x00000fbf ) - -#define tlbtab_start\ - mflr r1 ;\ - bl 0f ; - -#define tlbtab_end\ - .long 0, 0, 0 ; \ -0: mflr r0 ; \ - mtlr r1 ; \ - blr ; - -#define tlbentry(epn,sz,rpn,erpn,attr)\ - .long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr) - +#include <asm-ppc/mmu.h> /************************************************************************** * TLB TABLE @@ -83,19 +35,23 @@ * *************************************************************************/ - .section .bootpg,"ax" - .globl tlbtab + .section .bootpg,"ax" + .globl tlbtab tlbtab: - tlbtab_start - tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) - tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I ) - tlbentry( CFG_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X ) - tlbentry( CFG_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X ) - tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I ) - tlbentry( CFG_SDRAM_BASE + 0x10000000, SZ_256M, 0x10000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I ) - tlbentry( CFG_SDRAM_BASE + 0x20000000, SZ_256M, 0x20000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I ) - tlbentry( CFG_SDRAM_BASE + 0x30000000, SZ_256M, 0x30000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I ) - tlbentry( CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I ) - tlbentry( CFG_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I ) - tlbtab_end + tlbtab_start + + tlbentry(0xf0000000, SZ_256M, 0xf0000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I) + + /* + * TLB entries for SDRAM are not needed on this platform. + * They are dynamically generated in the SPD DDR(2) detection + * routine. + */ + + tlbentry(CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X) + tlbentry(CFG_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X) + tlbentry(CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I) + tlbtab_end diff --git a/cpu/ppc4xx/44x_spd_ddr.c b/cpu/ppc4xx/44x_spd_ddr.c index 32d44db..10b4c18 100644 --- a/cpu/ppc4xx/44x_spd_ddr.c +++ b/cpu/ppc4xx/44x_spd_ddr.c @@ -46,6 +46,7 @@ #include <asm/processor.h> #include <i2c.h> #include <ppc4xx.h> +#include <asm/mmu.h> #if defined(CONFIG_SPD_EEPROM) && \ (defined(CONFIG_440GP) || defined(CONFIG_440GX) || \ @@ -229,6 +230,22 @@ #define TRUE 1 #define FALSE 0 +/* + * This DDR2 setup code can dynamically setup the TLB entries for the DDR2 memory + * region. Right now the cache should still be disabled in U-Boot because of the + * EMAC driver, that need it's buffer descriptor to be located in non cached + * memory. + * + * If at some time this restriction doesn't apply anymore, just define + * CFG_ENABLE_SDRAM_CACHE in the board config file and this code should setup + * everything correctly. + */ +#ifdef CFG_ENABLE_SDRAM_CACHE +#define MY_TLB_WORD2_I_ENABLE 0 /* enable caching on SDRAM */ +#else +#define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE /* disable caching on SDRAM */ +#endif + const unsigned long test[NUMMEMTESTS][NUMMEMWORDS] = { {0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF}, @@ -259,6 +276,7 @@ typedef struct bank_param BANKPARMS; #ifdef CFG_SIMULATE_SPD_EEPROM extern unsigned char cfg_simulate_spd_eeprom[128]; #endif +void program_tlb(u32 start, u32 size, u32 tlb_word2_i_value); unsigned char spd_read(uchar chip, uint addr); @@ -377,6 +395,11 @@ long int spd_sdram(void) { total_size = program_bxcr(dimm_populated, iic0_dimm_addr, num_dimm_banks); +#ifdef CONFIG_PROG_SDRAM_TLB /* this define should eventually be removed */ + /* and program tlb entries for this size (dynamic) */ + program_tlb(0, total_size, MY_TLB_WORD2_I_ENABLE); +#endif + /* * program SDRAM Clock Timing Register (SDRAM0_CLKTR) */ @@ -1330,11 +1353,11 @@ unsigned long program_bxcr(unsigned long* dimm_populated, */ cr |= SDRAM_BXCR_SDBE; - for (i = 0; i < num_banks; i++) { - bank_parms[ctrl_bank_num[dimm_num]+i].bank_size_bytes = + for (i = 0; i < num_banks; i++) { + bank_parms[ctrl_bank_num[dimm_num]+i+dimm_num].bank_size_bytes = (4 * 1024 * 1024) * bank_size_id; - bank_parms[ctrl_bank_num[dimm_num]+i].cr = cr; - } + bank_parms[ctrl_bank_num[dimm_num]+i+dimm_num].cr = cr; + } } } diff --git a/include/configs/ocotea.h b/include/configs/ocotea.h index 0e3660b..fe4e638 100644 --- a/include/configs/ocotea.h +++ b/include/configs/ocotea.h @@ -148,8 +148,9 @@ /*----------------------------------------------------------------------- * DDR SDRAM *----------------------------------------------------------------------*/ -#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */ +#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */ #define SPD_EEPROM_ADDRESS {0x53,0x52} /* SPD i2c spd addresses */ +#define CONFIG_PROG_SDRAM_TLB 1 /* setup SDRAM TLB's dynamically*/ /*----------------------------------------------------------------------- * I2C |