summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--MAINTAINERS10
-rw-r--r--Makefile80
-rw-r--r--README15
-rw-r--r--arch/arc/Makefile8
-rw-r--r--arch/arm/Kconfig18
-rw-r--r--arch/arm/Makefile29
-rw-r--r--arch/arm/cpu/armv7/Makefile1
-rw-r--r--arch/arm/cpu/armv7/ls102xa/Makefile2
-rw-r--r--arch/arm/cpu/armv7/ls102xa/cpu.c34
-rw-r--r--arch/arm/cpu/armv7/ls102xa/fdt.c2
-rw-r--r--arch/arm/cpu/armv7/ls102xa/fsl_epu.c57
-rw-r--r--arch/arm/cpu/armv7/ls102xa/fsl_epu.h68
-rw-r--r--arch/arm/cpu/armv7/ls102xa/spl.c33
-rw-r--r--arch/arm/cpu/armv7/mx6/clock.c2
-rw-r--r--arch/arm/cpu/armv7/nonsec_virt.S7
-rw-r--r--arch/arm/cpu/armv7/omap-common/boot-common.c17
-rw-r--r--arch/arm/cpu/armv7/omap-common/emif-common.c9
-rw-r--r--arch/arm/cpu/armv7/omap5/Kconfig4
-rw-r--r--arch/arm/cpu/armv7/omap5/hw_data.c12
-rw-r--r--arch/arm/cpu/armv7/omap5/prcm-regs.c3
-rw-r--r--arch/arm/cpu/armv7/omap5/sdram.c2
-rw-r--r--arch/arm/cpu/armv7/stv0991/Makefile9
-rw-r--r--arch/arm/cpu/armv7/stv0991/clock.c41
-rw-r--r--arch/arm/cpu/armv7/stv0991/lowlevel.S12
-rw-r--r--arch/arm/cpu/armv7/stv0991/pinmux.c62
-rw-r--r--arch/arm/cpu/armv7/stv0991/reset.c26
-rw-r--r--arch/arm/cpu/armv7/stv0991/timer.c114
-rw-r--r--arch/arm/cpu/armv7/tegra124/Kconfig10
-rw-r--r--arch/arm/cpu/armv7/uniphier/Kconfig31
-rw-r--r--arch/arm/cpu/armv7/uniphier/Makefile1
-rw-r--r--arch/arm/cpu/armv7/uniphier/board_early_init_r.c15
-rw-r--r--arch/arm/cpu/armv7/uniphier/board_late_init.c38
-rw-r--r--arch/arm/cpu/armv7/uniphier/init_page_table.c7
-rw-r--r--arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c20
-rw-r--r--arch/arm/cpu/armv7/uniphier/support_card.c125
-rw-r--r--arch/arm/cpu/armv7/vf610/generic.c21
-rw-r--r--arch/arm/cpu/tegra20-common/pmu.c21
-rw-r--r--arch/arm/cpu/u-boot-spl.lds3
-rw-r--r--arch/arm/dts/Makefile2
-rw-r--r--arch/arm/dts/cros-ec-keyboard.dtsi105
-rw-r--r--arch/arm/dts/tegra124-jetson-tk1.dts1
-rw-r--r--arch/arm/dts/tegra124-nyan-big.dts365
-rw-r--r--arch/arm/dts/tegra124.dtsi114
-rw-r--r--arch/arm/dts/tegra30-tec-ng.dts4
-rw-r--r--arch/arm/dts/uniphier-ph1-ld4-ref.dts27
-rw-r--r--arch/arm/dts/uniphier-ph1-ld4.dtsi44
-rw-r--r--arch/arm/dts/uniphier-ph1-pro4-ref.dts29
-rw-r--r--arch/arm/dts/uniphier-ph1-pro4.dtsi64
-rw-r--r--arch/arm/dts/uniphier-ph1-sld3-ref.dts60
-rw-r--r--arch/arm/dts/uniphier-ph1-sld3.dtsi125
-rw-r--r--arch/arm/dts/uniphier-ph1-sld8-ref.dts27
-rw-r--r--arch/arm/dts/uniphier-ph1-sld8.dtsi44
-rw-r--r--arch/arm/imx-common/cpu.c3
-rw-r--r--arch/arm/include/asm/arch-am33xx/spl.h1
-rw-r--r--arch/arm/include/asm/arch-bcm2835/mbox.h33
-rw-r--r--arch/arm/include/asm/arch-ls102xa/config.h9
-rw-r--r--arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h9
-rw-r--r--arch/arm/include/asm/arch-ls102xa/ls102xa_stream_id.h17
-rw-r--r--arch/arm/include/asm/arch-ls102xa/ns_access.h118
-rw-r--r--arch/arm/include/asm/arch-ls102xa/spl.h20
-rw-r--r--arch/arm/include/asm/arch-mx6/clock.h8
-rw-r--r--arch/arm/include/asm/arch-mx6/mx6sl_pins.h5
-rw-r--r--arch/arm/include/asm/arch-omap5/clock.h12
-rw-r--r--arch/arm/include/asm/arch-omap5/omap.h4
-rw-r--r--arch/arm/include/asm/arch-rmobile/mmc.h14
-rw-r--r--arch/arm/include/asm/arch-rmobile/r8a7790.h13
-rw-r--r--arch/arm/include/asm/arch-rmobile/r8a7791.h13
-rw-r--r--arch/arm/include/asm/arch-rmobile/r8a7793.h14
-rw-r--r--arch/arm/include/asm/arch-rmobile/r8a7794.h13
-rw-r--r--arch/arm/include/asm/arch-rmobile/rcar-base.h39
-rw-r--r--arch/arm/include/asm/arch-rmobile/rcar-mstp.h109
-rw-r--r--arch/arm/include/asm/arch-stv0991/gpio.h22
-rw-r--r--arch/arm/include/asm/arch-stv0991/hardware.h73
-rw-r--r--arch/arm/include/asm/arch-stv0991/stv0991_cgu.h116
-rw-r--r--arch/arm/include/asm/arch-stv0991/stv0991_creg.h95
-rw-r--r--arch/arm/include/asm/arch-stv0991/stv0991_defs.h16
-rw-r--r--arch/arm/include/asm/arch-stv0991/stv0991_gpt.h43
-rw-r--r--arch/arm/include/asm/arch-stv0991/stv0991_periph.h44
-rw-r--r--arch/arm/include/asm/arch-stv0991/stv0991_wdru.h28
-rw-r--r--arch/arm/include/asm/arch-tegra/tegra_i2c.h2
-rw-r--r--arch/arm/include/asm/arch-uniphier/board.h7
-rw-r--r--arch/arm/include/asm/arch-vf610/imx-regs.h8
-rw-r--r--arch/arm/include/asm/omap_common.h3
-rw-r--r--arch/arm/include/asm/pcie_layerscape.h13
-rw-r--r--arch/avr32/Makefile8
-rw-r--r--arch/blackfin/Makefile8
-rw-r--r--arch/blackfin/include/asm/io.h3
-rw-r--r--arch/m68k/Makefile8
-rw-r--r--arch/microblaze/Makefile8
-rw-r--r--arch/mips/Makefile8
-rw-r--r--arch/mips/include/asm/unaligned.h2
-rw-r--r--arch/nds32/Makefile8
-rw-r--r--arch/nios2/Makefile8
-rw-r--r--arch/openrisc/Makefile8
-rw-r--r--arch/powerpc/Makefile11
-rw-r--r--arch/powerpc/cpu/mpc85xx/Kconfig10
-rw-r--r--arch/powerpc/cpu/mpc85xx/Makefile4
-rw-r--r--arch/powerpc/cpu/mpc85xx/b4860_ids.c4
-rw-r--r--arch/powerpc/cpu/mpc85xx/b4860_serdes.c19
-rw-r--r--arch/powerpc/cpu/mpc85xx/cmd_errata.c11
-rw-r--r--arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c3
-rw-r--r--arch/powerpc/cpu/mpc85xx/p2041_ids.c4
-rw-r--r--arch/powerpc/cpu/mpc85xx/p3041_ids.c4
-rw-r--r--arch/powerpc/cpu/mpc85xx/p4080_ids.c4
-rw-r--r--arch/powerpc/cpu/mpc85xx/p5020_ids.c4
-rw-r--r--arch/powerpc/cpu/mpc85xx/p5040_ids.c4
-rw-r--r--arch/powerpc/cpu/mpc85xx/speed.c35
-rw-r--r--arch/powerpc/cpu/mpc85xx/t1024_ids.c82
-rw-r--r--arch/powerpc/cpu/mpc85xx/t1024_serdes.c52
-rw-r--r--arch/powerpc/cpu/mpc85xx/t1040_ids.c30
-rw-r--r--arch/powerpc/cpu/mpc85xx/t2080_ids.c6
-rw-r--r--arch/powerpc/cpu/mpc85xx/t2080_serdes.c1
-rw-r--r--arch/powerpc/cpu/mpc85xx/t4240_ids.c4
-rw-r--r--arch/powerpc/cpu/mpc8xx/Kconfig4
-rw-r--r--arch/powerpc/cpu/mpc8xx/cpu_init.c3
-rw-r--r--arch/powerpc/cpu/mpc8xxx/cpu.c4
-rw-r--r--arch/powerpc/cpu/mpc8xxx/fdt.c104
-rw-r--r--arch/powerpc/include/asm/config_mpc85xx.h47
-rw-r--r--arch/powerpc/include/asm/fsl_errata.h24
-rw-r--r--arch/powerpc/include/asm/fsl_liodn.h4
-rw-r--r--arch/powerpc/include/asm/fsl_secure_boot.h4
-rw-r--r--arch/powerpc/include/asm/immap_85xx.h22
-rw-r--r--arch/powerpc/include/asm/processor.h4
-rw-r--r--arch/powerpc/lib/board.c12
-rw-r--r--arch/sandbox/Makefile8
-rw-r--r--arch/sandbox/dts/sandbox.dts17
-rw-r--r--arch/sandbox/include/asm/test.h26
-rw-r--r--arch/sh/Makefile8
-rw-r--r--arch/sh/include/asm/unaligned.h2
-rw-r--r--arch/sparc/Makefile8
-rw-r--r--arch/x86/Kconfig78
-rw-r--r--arch/x86/Makefile12
-rw-r--r--arch/x86/cpu/coreboot/ipchecksum.c3
-rw-r--r--arch/x86/cpu/ivybridge/cpu.c1
-rw-r--r--arch/x86/cpu/queensbay/fsp_configs.c20
-rw-r--r--arch/x86/cpu/queensbay/fsp_support.c416
-rw-r--r--arch/x86/cpu/start.S17
-rw-r--r--arch/x86/dts/Makefile3
-rw-r--r--arch/x86/dts/crownbay.dts53
-rw-r--r--arch/x86/include/asm/arch-coreboot/gpio.h3
-rw-r--r--arch/x86/include/asm/arch-coreboot/sysinfo.h2
-rw-r--r--arch/x86/include/asm/arch-coreboot/tables.h2
-rw-r--r--arch/x86/include/asm/arch-ivybridge/gpio.h3
-rw-r--r--arch/x86/include/asm/arch-ivybridge/pei_data.h2
-rw-r--r--arch/x86/include/asm/arch-queensbay/fsp/fsp_api.h59
-rw-r--r--arch/x86/include/asm/arch-queensbay/fsp/fsp_bootmode.h24
-rw-r--r--arch/x86/include/asm/arch-queensbay/fsp/fsp_ffs.h158
-rw-r--r--arch/x86/include/asm/arch-queensbay/fsp/fsp_fv.h137
-rw-r--r--arch/x86/include/asm/arch-queensbay/fsp/fsp_hob.h310
-rw-r--r--arch/x86/include/asm/arch-queensbay/fsp/fsp_infoheader.h36
-rw-r--r--arch/x86/include/asm/arch-queensbay/fsp/fsp_platform.h19
-rw-r--r--arch/x86/include/asm/arch-queensbay/fsp/fsp_support.h198
-rw-r--r--arch/x86/include/asm/arch-queensbay/fsp/fsp_types.h97
-rw-r--r--arch/x86/include/asm/arch-queensbay/fsp/fsp_vpd.h58
-rw-r--r--arch/x86/include/asm/config.h1
-rw-r--r--arch/x86/include/asm/global_data.h3
-rw-r--r--arch/x86/include/asm/gpio.h1
-rw-r--r--arch/x86/include/asm/io.h2
-rw-r--r--arch/x86/include/asm/linkage.h6
-rw-r--r--arch/x86/include/asm/pnp_def.h90
-rw-r--r--arch/x86/include/asm/post.h2
-rw-r--r--arch/x86/lib/Makefile1
-rw-r--r--arch/x86/lib/asm-offsets.c5
-rw-r--r--arch/x86/lib/bios.c1
-rw-r--r--arch/x86/lib/bios.h2
-rw-r--r--arch/x86/lib/cmd_hob.c67
-rw-r--r--arch/x86/lib/string.c4
-rw-r--r--board/aristainetos/aristainetos.c2
-rw-r--r--board/avionic-design/common/tamonten-ng.c12
-rw-r--r--board/comelit/dig297/dig297.c5
-rw-r--r--board/compulab/cm_t35/cm_t35.c7
-rw-r--r--board/coreboot/coreboot/coreboot.c6
-rw-r--r--board/corscience/tricorder/tricorder.c7
-rw-r--r--board/freescale/b4860qds/b4860qds.c95
-rw-r--r--board/freescale/b4860qds/eth_b4860qds.c127
-rw-r--r--board/freescale/b4860qds/law.c3
-rw-r--r--board/freescale/common/Makefile11
-rw-r--r--board/freescale/common/arm_sleep.c95
-rw-r--r--board/freescale/common/ls102xa_stream_id.c18
-rw-r--r--board/freescale/common/mpc85xx_sleep.c88
-rw-r--r--board/freescale/common/ns_access.c30
-rw-r--r--board/freescale/common/qixis.h7
-rw-r--r--board/freescale/common/sleep.h21
-rw-r--r--board/freescale/common/vid.c491
-rw-r--r--board/freescale/common/vid.h20
-rw-r--r--board/freescale/common/vsc3316_3308.c108
-rw-r--r--board/freescale/common/vsc3316_3308.h4
-rw-r--r--board/freescale/corenet_ds/eth_hydra.c7
-rw-r--r--board/freescale/ls1021aqds/MAINTAINERS3
-rw-r--r--board/freescale/ls1021aqds/ddr.c5
-rw-r--r--board/freescale/ls1021aqds/ls1021aqds.c283
-rw-r--r--board/freescale/ls1021aqds/ls102xa_pbi.cfg12
-rw-r--r--board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg7
-rw-r--r--board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg14
-rw-r--r--board/freescale/ls1021atwr/MAINTAINERS2
-rw-r--r--board/freescale/ls1021atwr/ls1021atwr.c151
-rw-r--r--board/freescale/ls1021atwr/ls102xa_pbi.cfg12
-rw-r--r--board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg14
-rw-r--r--board/freescale/mx6slevk/mx6slevk.c51
-rw-r--r--board/freescale/mx6sxsabresd/mx6sxsabresd.c52
-rw-r--r--board/freescale/t102xqds/Kconfig12
-rw-r--r--board/freescale/t102xqds/MAINTAINERS12
-rw-r--r--board/freescale/t102xqds/Makefile17
-rw-r--r--board/freescale/t102xqds/README328
-rw-r--r--board/freescale/t102xqds/ddr.c170
-rw-r--r--board/freescale/t102xqds/eth_t102xqds.c442
-rw-r--r--board/freescale/t102xqds/law.c32
-rw-r--r--board/freescale/t102xqds/pci.c23
-rw-r--r--board/freescale/t102xqds/spl.c151
-rw-r--r--board/freescale/t102xqds/t1024_pbi.cfg26
-rw-r--r--board/freescale/t102xqds/t1024_rcw.cfg10
-rw-r--r--board/freescale/t102xqds/t102xqds.c408
-rw-r--r--board/freescale/t102xqds/t102xqds.h14
-rw-r--r--board/freescale/t102xqds/t102xqds_qixis.h64
-rw-r--r--board/freescale/t102xqds/tlb.c117
-rw-r--r--board/freescale/t102xrdb/Kconfig12
-rw-r--r--board/freescale/t102xrdb/MAINTAINERS10
-rw-r--r--board/freescale/t102xrdb/Makefile17
-rw-r--r--board/freescale/t102xrdb/README258
-rw-r--r--board/freescale/t102xrdb/cpld.c103
-rw-r--r--board/freescale/t102xrdb/cpld.h45
-rw-r--r--board/freescale/t102xrdb/ddr.c154
-rw-r--r--board/freescale/t102xrdb/eth_t102xrdb.c100
-rw-r--r--board/freescale/t102xrdb/law.c32
-rw-r--r--board/freescale/t102xrdb/pci.c23
-rw-r--r--board/freescale/t102xrdb/spl.c107
-rw-r--r--board/freescale/t102xrdb/t1024_pbi.cfg26
-rw-r--r--board/freescale/t102xrdb/t1024_rcw.cfg8
-rw-r--r--board/freescale/t102xrdb/t102xrdb.c144
-rw-r--r--board/freescale/t102xrdb/t102xrdb.h13
-rw-r--r--board/freescale/t102xrdb/tlb.c117
-rw-r--r--board/freescale/t104xrdb/spl.c26
-rw-r--r--board/freescale/t208xqds/ddr.h15
-rw-r--r--board/freescale/t208xqds/t2080_rcw.cfg16
-rw-r--r--board/freescale/t208xqds/t208xqds.c13
-rw-r--r--board/freescale/t208xrdb/t2080_rcw.cfg20
-rw-r--r--board/google/chromebook_link/Kconfig1
-rw-r--r--board/google/chromebook_link/link.c40
-rw-r--r--board/hermes/Kconfig9
-rw-r--r--board/hermes/MAINTAINERS6
-rw-r--r--board/hermes/Makefile8
-rw-r--r--board/hermes/flash.c444
-rw-r--r--board/hermes/hermes.c590
-rw-r--r--board/hermes/u-boot.lds88
-rw-r--r--board/hermes/u-boot.lds.debug121
-rw-r--r--board/isee/igep00x0/igep00x0.c7
-rw-r--r--board/keymile/km82xx/km82xx.c2
-rw-r--r--board/logicpd/omap3som/omap3logic.c7
-rw-r--r--board/logicpd/zoom1/zoom1.c5
-rw-r--r--board/matrix_vision/mvblx/mvblx.c6
-rw-r--r--board/muas3001/muas3001.c4
-rw-r--r--board/nokia/rx51/rx51.c6
-rw-r--r--board/nvidia/cardhu/cardhu.c13
-rw-r--r--board/nvidia/common/board.c4
-rw-r--r--board/nvidia/dalmore/dalmore.c21
-rw-r--r--board/nvidia/nyan-big/Kconfig24
-rw-r--r--board/nvidia/nyan-big/MAINTAINERS6
-rw-r--r--board/nvidia/nyan-big/Makefile9
-rw-r--r--board/nvidia/nyan-big/nyan-big.c27
-rw-r--r--board/nvidia/nyan-big/pinmux-config-nyan-big.h287
-rw-r--r--board/nvidia/venice2/as3722_init.h2
-rw-r--r--board/nvidia/whistler/whistler.c29
-rw-r--r--board/overo/overo.c7
-rw-r--r--board/pandora/pandora.c5
-rw-r--r--board/raspberrypi/rpi/Kconfig (renamed from board/raspberrypi/rpi_b/Kconfig)6
-rw-r--r--board/raspberrypi/rpi/MAINTAINERS6
-rw-r--r--board/raspberrypi/rpi/Makefile (renamed from board/raspberrypi/rpi_b/Makefile)2
-rw-r--r--board/raspberrypi/rpi/rpi.c (renamed from board/raspberrypi/rpi_b/rpi_b.c)134
-rw-r--r--board/raspberrypi/rpi_b/MAINTAINERS6
-rw-r--r--board/renesas/alt/Makefile2
-rw-r--r--board/renesas/alt/alt.c46
-rw-r--r--board/renesas/gose/Makefile2
-rw-r--r--board/renesas/gose/gose.c28
-rw-r--r--board/renesas/koelsch/Makefile2
-rw-r--r--board/renesas/koelsch/koelsch.c24
-rw-r--r--board/renesas/lager/Makefile2
-rw-r--r--board/renesas/lager/lager.c51
-rw-r--r--board/renesas/rcar-gen2-common/common.c59
-rw-r--r--board/siemens/common/board.c9
-rw-r--r--board/siemens/common/factoryset.c52
-rw-r--r--board/siemens/common/factoryset.h2
-rw-r--r--board/siemens/draco/board.c9
-rw-r--r--board/siemens/pxm2/board.c34
-rw-r--r--board/siemens/rut/board.c23
-rw-r--r--board/solidrun/hummingboard/hummingboard.c2
-rw-r--r--board/st/stv0991/Kconfig23
-rw-r--r--board/st/stv0991/MAINTAINERS5
-rw-r--r--board/st/stv0991/Makefile8
-rw-r--r--board/st/stv0991/stv0991.c104
-rw-r--r--board/tbs/tbs2910/Kconfig8
-rw-r--r--board/technexion/tao3530/tao3530.c7
-rw-r--r--board/ti/beagle/beagle.c7
-rw-r--r--board/ti/beagle_x15/Kconfig12
-rw-r--r--board/ti/beagle_x15/Makefile8
-rw-r--r--board/ti/beagle_x15/board.c395
-rw-r--r--board/ti/beagle_x15/mux_data.h55
-rw-r--r--board/ti/dra7xx/evm.c12
-rw-r--r--board/ti/dra7xx/mux_data.h4
-rw-r--r--board/ti/evm/evm.c8
-rw-r--r--board/ti/sdp3430/sdp.c5
-rw-r--r--board/timll/devkit8000/devkit8000.c7
-rw-r--r--board/toradex/apalis_t30/apalis_t30.c19
-rw-r--r--common/Makefile20
-rw-r--r--common/board_r.c42
-rw-r--r--common/cmd_bdinfo.c3
-rw-r--r--common/cmd_fuse.c2
-rw-r--r--common/cmd_i2c.c376
-rw-r--r--common/cmd_mmc.c3
-rw-r--r--common/console.c8
-rw-r--r--common/image-fdt.c15
-rw-r--r--common/lcd.c2
-rw-r--r--common/spl/spl_mmc.c41
-rw-r--r--common/usb.c1
-rw-r--r--configs/T1024QDS_D4_SECURE_BOOT_defconfig4
-rw-r--r--configs/T1024QDS_NAND_defconfig5
-rw-r--r--configs/T1024QDS_SDCARD_defconfig5
-rw-r--r--configs/T1024QDS_SECURE_BOOT_defconfig4
-rw-r--r--configs/T1024QDS_SPIFLASH_defconfig5
-rw-r--r--configs/T1024RDB_NAND_defconfig5
-rw-r--r--configs/T1024RDB_SDCARD_defconfig5
-rw-r--r--configs/T1024RDB_SECURE_BOOT_defconfig4
-rw-r--r--configs/T1024RDB_SPIFLASH_defconfig5
-rw-r--r--configs/T1024RDB_defconfig4
-rw-r--r--configs/beagle_x15_defconfig5
-rw-r--r--configs/hermes_defconfig3
-rw-r--r--configs/ls1021aqds_nand_defconfig4
-rw-r--r--configs/ls1021aqds_qspi_defconfig3
-rw-r--r--configs/ls1021aqds_sdcard_defconfig4
-rw-r--r--configs/ls1021atwr_qspi_defconfig3
-rw-r--r--configs/ls1021atwr_sdcard_defconfig4
-rw-r--r--configs/nyan-big_defconfig5
-rw-r--r--configs/ph1_ld4_defconfig1
-rw-r--r--configs/ph1_pro4_defconfig1
-rw-r--r--configs/ph1_sld8_defconfig1
-rw-r--r--configs/rpi_b_defconfig2
-rw-r--r--configs/rpi_defconfig2
-rw-r--r--configs/stv0991_defconfig3
-rw-r--r--doc/README.clang4
-rw-r--r--doc/README.fsl-dpaa10
-rw-r--r--doc/README.scrapyard5
-rw-r--r--doc/git-mailrc8
-rw-r--r--drivers/bios_emulator/besys.c2
-rw-r--r--drivers/bios_emulator/bios.c2
-rw-r--r--drivers/block/dwc_ahsata.c14
-rw-r--r--drivers/block/pata_bfin.h1
-rw-r--r--drivers/core/device.c6
-rw-r--r--drivers/ddr/fsl/arm_ddr_gen3.c45
-rw-r--r--drivers/ddr/fsl/ctrl_regs.c31
-rw-r--r--drivers/ddr/fsl/ddr4_dimm_params.c22
-rw-r--r--drivers/ddr/fsl/fsl_ddr_gen4.c44
-rw-r--r--drivers/ddr/fsl/mpc85xx_ddr_gen3.c67
-rw-r--r--drivers/dfu/dfu.c29
-rw-r--r--drivers/gpio/intel_ich6_gpio.c55
-rw-r--r--drivers/i2c/Makefile2
-rw-r--r--drivers/i2c/i2c-emul-uclass.c14
-rw-r--r--drivers/i2c/i2c-uclass.c466
-rw-r--r--drivers/i2c/i2c_core.c8
-rw-r--r--drivers/i2c/sandbox_i2c.c111
-rw-r--r--drivers/i2c/tegra_i2c.c366
-rw-r--r--drivers/misc/Makefile5
-rw-r--r--drivers/misc/i2c_eeprom.c51
-rw-r--r--drivers/misc/i2c_eeprom_emul.c168
-rw-r--r--drivers/misc/mxc_ocotp.c2
-rw-r--r--drivers/misc/mxs_ocotp.c14
-rw-r--r--drivers/misc/smsc_lpc47m.c33
-rw-r--r--drivers/mmc/dw_mmc.c2
-rw-r--r--drivers/mmc/exynos_dw_mmc.c22
-rw-r--r--drivers/mmc/mmc.c92
-rw-r--r--drivers/mmc/omap_hsmmc.c12
-rw-r--r--drivers/mmc/sh_mmcif.c19
-rw-r--r--drivers/mmc/sh_mmcif.h8
-rw-r--r--drivers/mtd/nand/fsl_ifc_nand.c2
-rw-r--r--drivers/mtd/nand/fsl_ifc_spl.c10
-rw-r--r--drivers/mtd/nand/omap_gpmc.c9
-rw-r--r--drivers/mtd/spi/sf_internal.h22
-rw-r--r--drivers/mtd/spi/sf_ops.c31
-rw-r--r--drivers/mtd/spi/sf_params.c102
-rw-r--r--drivers/mtd/spi/sf_probe.c9
-rw-r--r--drivers/net/fm/Makefile2
-rw-r--r--drivers/net/fm/b4860.c64
-rw-r--r--drivers/net/fm/eth.c7
-rw-r--r--drivers/net/fm/init.c2
-rw-r--r--drivers/net/fm/t1024.c88
-rw-r--r--drivers/net/fm/t1040.c4
-rw-r--r--drivers/net/phy/Makefile1
-rw-r--r--drivers/net/phy/cortina.c333
-rw-r--r--drivers/net/phy/phy.c3
-rw-r--r--drivers/net/phy/vitesse.c13
-rw-r--r--drivers/pci/Makefile1
-rw-r--r--drivers/pci/pcie_layerscape.c51
-rw-r--r--drivers/power/palmas.c2
-rw-r--r--drivers/power/power_i2c.c2
-rw-r--r--drivers/power/tps6586x.c27
-rw-r--r--drivers/power/twl4030.c28
-rw-r--r--drivers/rtc/mvrtc.h2
-rw-r--r--drivers/serial/ns16550.c9
-rw-r--r--drivers/serial/serial_pl01x.c49
-rw-r--r--drivers/spi/ich.c29
-rw-r--r--drivers/spi/ti_qspi.c8
-rw-r--r--drivers/thermal/imx_thermal.c2
-rw-r--r--drivers/tpm/tpm.c2
-rw-r--r--drivers/tpm/tpm_tis_i2c.c2
-rw-r--r--drivers/usb/gadget/ether.c24
-rw-r--r--drivers/usb/host/ehci-fsl.c186
-rw-r--r--drivers/usb/host/ehci-hcd.c1
-rw-r--r--drivers/usb/host/ehci-mx6.c27
-rw-r--r--drivers/usb/phy/omap_usb_phy.c2
-rw-r--r--include/common.h11
-rw-r--r--include/commproc.h28
-rw-r--r--include/config_fallbacks.h10
-rw-r--r--include/configs/B4860QDS.h6
-rw-r--r--include/configs/C29XPCIE.h2
-rw-r--r--include/configs/P1010RDB.h2
-rw-r--r--include/configs/P1022DS.h3
-rw-r--r--include/configs/P1023RDB.h3
-rw-r--r--include/configs/P5040DS.h1
-rw-r--r--include/configs/T102xQDS.h939
-rw-r--r--include/configs/T102xRDB.h896
-rw-r--r--include/configs/T1040QDS.h7
-rw-r--r--include/configs/T104xRDB.h12
-rw-r--r--include/configs/T208xQDS.h19
-rw-r--r--include/configs/T4240RDB.h1
-rw-r--r--include/configs/a3m071.h2
-rw-r--r--include/configs/alt.h19
-rw-r--r--include/configs/am3517_crane.h2
-rw-r--r--include/configs/am3517_evm.h2
-rw-r--r--include/configs/apalis_t30.h3
-rw-r--r--include/configs/beagle_x15.h88
-rw-r--r--include/configs/beaver.h3
-rw-r--r--include/configs/cardhu.h5
-rw-r--r--include/configs/cm_t35.h2
-rw-r--r--include/configs/cm_t54.h1
-rw-r--r--include/configs/colibri_t30.h3
-rw-r--r--include/configs/dalmore.h5
-rw-r--r--include/configs/devkit8000.h2
-rw-r--r--include/configs/dra7xx_evm.h1
-rw-r--r--include/configs/gose.h10
-rw-r--r--include/configs/hermes.h315
-rw-r--r--include/configs/imx6_spl.h3
-rw-r--r--include/configs/jetson-tk1.h5
-rw-r--r--include/configs/km82xx.h3
-rw-r--r--include/configs/koelsch.h11
-rw-r--r--include/configs/lager.h19
-rw-r--r--include/configs/ls1021aqds.h175
-rw-r--r--include/configs/ls1021atwr.h95
-rw-r--r--include/configs/lwmon5.h2
-rw-r--r--include/configs/mcx.h2
-rw-r--r--include/configs/muas3001.h4
-rw-r--r--include/configs/mx53loco.h1
-rw-r--r--include/configs/mx6sabre_common.h3
-rw-r--r--include/configs/mx6slevk.h14
-rw-r--r--include/configs/mx6sxsabresd.h24
-rw-r--r--include/configs/nyan-big.h74
-rw-r--r--include/configs/omap3_evm.h2
-rw-r--r--include/configs/omap3_evm_quick_mmc.h2
-rw-r--r--include/configs/omap5_uevm.h1
-rw-r--r--include/configs/p1_twr.h2
-rw-r--r--include/configs/ph1_ld4.h53
-rw-r--r--include/configs/ph1_pro4.h55
-rw-r--r--include/configs/ph1_sld8.h55
-rw-r--r--include/configs/pxm2.h4
-rw-r--r--include/configs/rcar-gen2-common.h4
-rw-r--r--include/configs/rpi.h (renamed from include/configs/rpi_b.h)18
-rw-r--r--include/configs/rut.h4
-rw-r--r--include/configs/sama5d3_xplained.h2
-rw-r--r--include/configs/sama5d3xek.h2
-rw-r--r--include/configs/sandbox.h6
-rw-r--r--include/configs/seaboard.h3
-rw-r--r--include/configs/siemens-am33x-common.h2
-rw-r--r--include/configs/stv0991.h95
-rw-r--r--include/configs/sun7i.h1
-rw-r--r--include/configs/tao3530.h2
-rw-r--r--include/configs/tbs2910.h2
-rw-r--r--include/configs/tec-ng.h5
-rw-r--r--include/configs/tegra-common.h1
-rw-r--r--include/configs/tegra114-common.h3
-rw-r--r--include/configs/tegra124-common.h3
-rw-r--r--include/configs/tegra20-common.h3
-rw-r--r--include/configs/tegra30-common.h3
-rw-r--r--include/configs/ti814x_evm.h2
-rw-r--r--include/configs/ti816x_evm.h2
-rw-r--r--include/configs/ti_armv7_common.h2
-rw-r--r--include/configs/ti_omap5_common.h5
-rw-r--r--include/configs/tricorder.h2
-rw-r--r--include/configs/trimslice.h3
-rw-r--r--include/configs/uniphier.h (renamed from include/configs/uniphier-common.h)63
-rw-r--r--include/configs/venice2.h5
-rw-r--r--include/configs/whistler.h3
-rw-r--r--include/configs/zynq-common.h2
-rw-r--r--include/cortina.h75
-rw-r--r--include/dm/uclass-id.h4
-rw-r--r--include/dm/ut.h12
-rw-r--r--include/dt-bindings/pinctrl/pinctrl-tegra.h45
-rw-r--r--include/errno.h3
-rw-r--r--include/fm_eth.h15
-rw-r--r--include/fsl_ddr_sdram.h12
-rw-r--r--include/fsl_usb.h23
-rw-r--r--include/i2c.h352
-rw-r--r--include/i2c_eeprom.h19
-rw-r--r--include/linux/compat.h4
-rw-r--r--include/linux/linkage.h2
-rw-r--r--include/linux/string.h3
-rw-r--r--include/linux/usb/xhci-omap.h4
-rw-r--r--include/mmc.h6
-rw-r--r--include/pci_ids.h8
-rw-r--r--include/phy.h2
-rw-r--r--include/smsc_lpc47m.h19
-rw-r--r--include/spi.h1
-rw-r--r--include/tps6586x.h4
-rw-r--r--include/twl4030.h2
-rw-r--r--include/usb/ehci-fsl.h2
-rw-r--r--lib/Makefile9
-rw-r--r--lib/asm-offsets.c3
-rw-r--r--lib/bzip2/Makefile2
-rw-r--r--lib/bzip2/bzlib.c (renamed from lib/bzlib.c)0
-rw-r--r--lib/bzip2/bzlib_crctable.c (renamed from lib/bzlib_crctable.c)0
-rw-r--r--lib/bzip2/bzlib_decompress.c (renamed from lib/bzlib_decompress.c)0
-rw-r--r--lib/bzip2/bzlib_huffman.c (renamed from lib/bzlib_huffman.c)0
-rw-r--r--lib/bzip2/bzlib_private.h (renamed from lib/bzlib_private.h)0
-rw-r--r--lib/bzip2/bzlib_randtable.c (renamed from lib/bzlib_randtable.c)0
-rw-r--r--lib/errno_str.c147
-rw-r--r--lib/libfdt/Makefile5
-rw-r--r--lib/string.c25
-rw-r--r--lib/zlib/zlib.h2
-rw-r--r--net/bootp.c4
-rw-r--r--scripts/Makefile.spl23
-rwxr-xr-xscripts/get_maintainer.pl3
-rw-r--r--scripts/kconfig/menu.c4
-rw-r--r--test/dm/Makefile1
-rw-r--r--test/dm/cmd_dm.c103
-rw-r--r--test/dm/i2c.c216
-rw-r--r--test/dm/test.dts17
-rwxr-xr-xtest/ums/ums_gadget_test.sh10
-rw-r--r--tools/ifdtool.c43
-rw-r--r--tools/ifdtool.h2
-rw-r--r--tools/pblimage.c110
536 files changed, 17895 insertions, 3490 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index c8386ab..6041936 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -128,6 +128,12 @@ T: git git://git.denx.de/u-boot-stm.git
F: arch/arm/cpu/arm926ejs/spear/
F: arch/arm/include/asm/arch-spear/
+ARM STM STV0991
+M: Vikas Manocha <vikas.manocha@st.com>
+S: Maintained
+F: arch/arm/cpu/armv7/stv0991/
+F: arch/arm/include/asm/arch-stv0991/
+
ARM SUNXI
M: Ian Campbell <ijc@hellion.org.uk>
M: Hans De Goede <hdegoede@redhat.com>
@@ -196,7 +202,8 @@ F: drivers/mtd/cfi_flash.c
F: drivers/mtd/jedec_flash.c
COLDFIRE
-M: Jason Jin <jason.jin@freescale.com>
+M: Huan Wang <alison.wang@freescale.com>
+M: Angelo Dureghello <angelo@sysam.it>
S: Maintained
T: git git://git.denx.de/u-boot-coldfire.git
F: arch/m68k/
@@ -390,6 +397,7 @@ T: git git://git.denx.de/u-boot-tq-group.git
UBI
M: Kyungmin Park <kmpark@infradead.org>
+M: Heiko Schocher <hs@denx.de>
S: Maintained
T: git git://git.denx.de/u-boot-ubi.git
F: drivers/mtd/ubi/
diff --git a/Makefile b/Makefile
index b4ed775..1560bff 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 2015
PATCHLEVEL = 01
SUBLEVEL =
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
NAME =
# *DOCUMENTATION*
@@ -503,6 +503,7 @@ autoconf_is_current := $(if $(wildcard $(KCONFIG_CONFIG)),$(shell find . \
-path ./include/config/auto.conf -newer $(KCONFIG_CONFIG)))
ifneq ($(autoconf_is_current),)
include $(srctree)/config.mk
+include $(srctree)/arch/$(ARCH)/Makefile
endif
# If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
@@ -601,17 +602,11 @@ c_flags := $(KBUILD_CFLAGS) $(cpp_flags)
#########################################################################
# U-Boot objects....order is important (i.e. start must be first)
-head-y := $(CPUDIR)/start.o
-head-$(CONFIG_4xx) += arch/powerpc/cpu/ppc4xx/resetvec.o
-head-$(CONFIG_MPC85xx) += arch/powerpc/cpu/mpc85xx/resetvec.o
-
HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)
libs-y += lib/
libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
-libs-y += $(CPUDIR)/
libs-$(CONFIG_OF_EMBED) += dts/
-libs-y += arch/$(ARCH)/lib/
libs-y += fs/
libs-y += net/
libs-y += disk/
@@ -645,23 +640,11 @@ libs-y += drivers/usb/musb-new/
libs-y += drivers/usb/phy/
libs-y += drivers/usb/ulpi/
libs-y += common/
-libs-y += lib/libfdt/
libs-$(CONFIG_API) += api/
libs-$(CONFIG_HAS_POST) += post/
libs-y += test/
libs-y += test/dm/
-ifneq (,$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35 mxs vf610))
-libs-y += arch/$(ARCH)/imx-common/
-endif
-
-ifneq (,$(filter $(SOC), armada-xp kirkwood))
-libs-y += arch/$(ARCH)/mvebu-common/
-endif
-
-libs-$(CONFIG_ARM) += arch/arm/cpu/
-libs-$(CONFIG_PPC) += arch/powerpc/cpu/
-
libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
libs-y := $(sort $(libs-y))
@@ -963,27 +946,33 @@ u-boot-nand.gph: u-boot.bin FORCE
ifneq ($(CONFIG_X86_RESET_VECTOR),)
rom: u-boot.rom FORCE
-u-boot.rom: u-boot-x86-16bit.bin u-boot-dtb.bin \
- $(srctree)/board/$(BOARDDIR)/mrc.bin
- $(objtree)/tools/ifdtool -c -r $(CONFIG_ROM_SIZE) u-boot.tmp
- if [ -n "$(CONFIG_HAVE_INTEL_ME)" ]; then \
- $(objtree)/tools/ifdtool -D \
- $(srctree)/board/$(BOARDDIR)/descriptor.bin u-boot.tmp; \
- $(objtree)/tools/ifdtool \
- -i ME:$(srctree)/board/$(BOARDDIR)/me.bin u-boot.tmp; \
- fi
- $(objtree)/tools/ifdtool -w \
- $(CONFIG_SYS_TEXT_BASE):$(objtree)/u-boot-dtb.bin u-boot.tmp
- $(objtree)/tools/ifdtool -w \
- $(CONFIG_X86_MRC_START):$(srctree)/board/$(BOARDDIR)/mrc.bin \
- u-boot.tmp
- $(objtree)/tools/ifdtool -w \
- $(CONFIG_SYS_X86_START16):$(objtree)/u-boot-x86-16bit.bin \
- u-boot.tmp
- $(objtree)/tools/ifdtool -w \
- $(CONFIG_X86_OPTION_ROM_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_X86_OPTION_ROM_FILENAME) \
- u-boot.tmp
- mv u-boot.tmp $@
+IFDTOOL=$(objtree)/tools/ifdtool
+IFDTOOL_FLAGS = -w $(CONFIG_SYS_TEXT_BASE):$(objtree)/u-boot-dtb.bin
+IFDTOOL_FLAGS += -w $(CONFIG_SYS_X86_START16):$(objtree)/u-boot-x86-16bit.bin
+
+ifneq ($(CONFIG_HAVE_INTEL_ME),)
+IFDTOOL_ME_FLAGS = -D $(srctree)/board/$(BOARDDIR)/descriptor.bin
+IFDTOOL_ME_FLAGS += -i ME:$(srctree)/board/$(BOARDDIR)/me.bin
+endif
+
+ifneq ($(CONFIG_HAVE_MRC),)
+IFDTOOL_FLAGS += -w $(CONFIG_X86_MRC_START):$(srctree)/board/$(BOARDDIR)/mrc.bin
+endif
+
+ifneq ($(CONFIG_X86_OPTION_ROM_ADDR),)
+IFDTOOL_FLAGS += -w $(CONFIG_X86_OPTION_ROM_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_X86_OPTION_ROM_FILENAME)
+endif
+
+quiet_cmd_ifdtool = IFDTOOL $@
+cmd_ifdtool = $(IFDTOOL) -c -r $(CONFIG_ROM_SIZE) u-boot.tmp;
+ifneq ($(CONFIG_HAVE_INTEL_ME),)
+cmd_ifdtool += $(IFDTOOL) $(IFDTOOL_ME_FLAGS) u-boot.tmp;
+endif
+cmd_ifdtool += $(IFDTOOL) $(IFDTOOL_FLAGS) u-boot.tmp;
+cmd_ifdtool += mv u-boot.tmp $@
+
+u-boot.rom: u-boot-x86-16bit.bin u-boot-dtb.bin
+ $(call if_changed,ifdtool)
OBJCOPYFLAGS_u-boot-x86-16bit.bin := -O binary -j .start16 -j .resetvec
u-boot-x86-16bit.bin: u-boot FORCE
@@ -1016,15 +1005,22 @@ u-boot-img.bin: spl/u-boot-spl.bin u-boot.img FORCE
#concatenated with u-boot binary. It is need by PowerPC SoC having
#internal SRAM <= 512KB.
MKIMAGEFLAGS_u-boot-spl.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
- -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage
+ -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage \
+ -A $(ARCH) -a $(CONFIG_SPL_TEXT_BASE)
spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE
$(call if_changed,mkimage)
+ifeq ($(ARCH),arm)
+UBOOT_BINLOAD := u-boot.img
+else
+UBOOT_BINLOAD := u-boot.bin
+endif
+
OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
--gap-fill=0xff
-u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl u-boot.bin FORCE
+u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl $(UBOOT_BINLOAD) FORCE
$(call if_changed,pad_cat)
# PPC4xx needs the SPL at the end of the image, since the reset vector
diff --git a/README b/README
index 66770b6..4ca04d0 100644
--- a/README
+++ b/README
@@ -409,6 +409,10 @@ The following options need to be configured:
Enables a workaround for IFC erratum A003399. It is only
requred during NOR boot.
+ CONFIG_A008044_WORKAROUND
+ Enables a workaround for T1040/T1042 erratum A008044. It is only
+ requred during NAND boot and valid for Rev 1.0 SoC revision
+
CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY
This is the value to write into CCSR offset 0x18600
@@ -3657,10 +3661,13 @@ FIT uImage format:
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR,
CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS,
- CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION
- Address, size and partition on the MMC to load U-Boot from
+ Address and partition on the MMC to load U-Boot from
when the MMC is being used in raw mode.
+ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION
+ Partition on the MMC to load U-Boot from when the MMC is being
+ used in raw mode
+
CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR
Sector to load kernel uImage from when MMC is being
used in raw mode (for Falcon mode)
@@ -3671,6 +3678,10 @@ FIT uImage format:
parameters from when MMC is being used in raw mode
(for falcon mode)
+ CONFIG_SYS_MMCSD_FS_BOOT_PARTITION
+ Partition on the MMC to load U-Boot from when the MMC is being
+ used in fs mode
+
CONFIG_SPL_FAT_SUPPORT
Support for fs/fat/libfat.o in SPL binary
diff --git a/arch/arc/Makefile b/arch/arc/Makefile
new file mode 100644
index 0000000..de25cc9
--- /dev/null
+++ b/arch/arc/Makefile
@@ -0,0 +1,8 @@
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+head-y := arch/arc/cpu/$(CPU)/start.o
+
+libs-y += arch/arc/cpu/$(CPU)/
+libs-y += arch/arc/lib/
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 0982117..2b0d2c9 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -341,6 +341,10 @@ config TARGET_SPEAR600
bool "Support spear600"
select CPU_ARM926EJS
+config TARGET_STV0991
+ bool "Support stv0991"
+ select CPU_V7
+
config TARGET_X600
bool "Support x600"
select CPU_ARM926EJS
@@ -396,8 +400,8 @@ config TARGET_MX35PDK
bool "Support mx35pdk"
select CPU_ARM1136
-config TARGET_RPI_B
- bool "Support rpi_b"
+config TARGET_RPI
+ bool "Support rpi"
select CPU_ARM1176
config TARGET_TNETV107X_EVM
@@ -650,6 +654,7 @@ config TARGET_KOSAGI_NOVENA
config TARGET_TBS2910
bool "Support tbs2910"
+ select CPU_V7
config TARGET_TQMA6
bool "TQ Systems TQMa6 board"
@@ -728,12 +733,14 @@ config TARGET_LS2085A_SIMU
select ARM64
config TARGET_LS1021AQDS
- bool "Support ls1021aqds_nor"
+ bool "Support ls1021aqds"
select CPU_V7
+ select SUPPORT_SPL
config TARGET_LS1021ATWR
- bool "Support ls1021atwr_nor"
+ bool "Support ls1021atwr"
select CPU_V7
+ select SUPPORT_SPL
config TARGET_BALLOON3
bool "Support balloon3"
@@ -931,7 +938,7 @@ source "board/palmtreo680/Kconfig"
source "board/phytec/pcm051/Kconfig"
source "board/ppcag/bg0900/Kconfig"
source "board/pxa255_idp/Kconfig"
-source "board/raspberrypi/rpi_b/Kconfig"
+source "board/raspberrypi/rpi/Kconfig"
source "board/ronetix/pm9261/Kconfig"
source "board/ronetix/pm9263/Kconfig"
source "board/ronetix/pm9g45/Kconfig"
@@ -953,6 +960,7 @@ source "board/spear/spear600/Kconfig"
source "board/spear/x600/Kconfig"
source "board/st-ericsson/snowball/Kconfig"
source "board/st-ericsson/u8500/Kconfig"
+source "board/st/stv0991/Kconfig"
source "board/sunxi/Kconfig"
source "board/syteco/jadecpu/Kconfig"
source "board/syteco/zmx25/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
new file mode 100644
index 0000000..ebb7dc3
--- /dev/null
+++ b/arch/arm/Makefile
@@ -0,0 +1,29 @@
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+head-y := arch/arm/cpu/$(CPU)/start.o
+
+ifeq ($(CONFIG_SPL_BUILD),y)
+ifneq ($(CONFIG_SPL_START_S_PATH),)
+head-y := $(CONFIG_SPL_START_S_PATH:"%"=%)/start.o
+endif
+endif
+
+libs-y += arch/arm/cpu/$(CPU)/
+libs-y += arch/arm/cpu/
+libs-y += arch/arm/lib/
+
+ifeq ($(CONFIG_SPL_BUILD),y)
+ifneq (,$(CONFIG_MX23)$(CONFIG_MX35)$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35))
+libs-y += arch/arm/imx-common/
+endif
+else
+ifneq (,$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35 mxs vf610))
+libs-y += arch/arm/imx-common/
+endif
+endif
+
+ifneq (,$(filter $(SOC), armada-xp kirkwood))
+libs-y += arch/arm/mvebu-common/
+endif
diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile
index e419716..409e6f5 100644
--- a/arch/arm/cpu/armv7/Makefile
+++ b/arch/arm/cpu/armv7/Makefile
@@ -56,6 +56,7 @@ obj-$(CONFIG_OMAP54XX) += omap5/
obj-$(CONFIG_RMOBILE) += rmobile/
obj-$(CONFIG_ARCH_S5PC1XX) += s5pc1xx/
obj-$(CONFIG_SOCFPGA) += socfpga/
+obj-$(if $(filter stv0991,$(SOC)),y) += stv0991/
obj-$(CONFIG_ARCH_SUNXI) += sunxi/
obj-$(CONFIG_TEGRA20) += tegra20/
obj-$(CONFIG_U8500) += u8500/
diff --git a/arch/arm/cpu/armv7/ls102xa/Makefile b/arch/arm/cpu/armv7/ls102xa/Makefile
index d82ce8d..2e6a207 100644
--- a/arch/arm/cpu/armv7/ls102xa/Makefile
+++ b/arch/arm/cpu/armv7/ls102xa/Makefile
@@ -7,6 +7,8 @@
obj-y += cpu.o
obj-y += clock.o
obj-y += timer.o
+obj-y += fsl_epu.o
obj-$(CONFIG_OF_LIBFDT) += fdt.o
obj-$(CONFIG_SYS_HAS_SERDES) += fsl_ls1_serdes.o ls102xa_serdes.o
+obj-$(CONFIG_SPL) += spl.o
diff --git a/arch/arm/cpu/armv7/ls102xa/cpu.c b/arch/arm/cpu/armv7/ls102xa/cpu.c
index b7dde45..ce2d92f 100644
--- a/arch/arm/cpu/armv7/ls102xa/cpu.c
+++ b/arch/arm/cpu/armv7/ls102xa/cpu.c
@@ -12,6 +12,8 @@
#include <netdev.h>
#include <fsl_esdhc.h>
+#include "fsl_epu.h"
+
DECLARE_GLOBAL_DATA_PTR;
#if defined(CONFIG_DISPLAY_CPUINFO)
@@ -101,3 +103,35 @@ int cpu_eth_init(bd_t *bis)
return 0;
}
+
+int arch_cpu_init(void)
+{
+ void *epu_base = (void *)(CONFIG_SYS_DCSRBAR + EPU_BLOCK_OFFSET);
+
+ /*
+ * After wakeup from deep sleep, Clear EPU registers
+ * as early as possible to prevent from possible issue.
+ * It's also safe to clear at normal boot.
+ */
+ fsl_epu_clean(epu_base);
+
+ return 0;
+}
+
+#if defined(CONFIG_ARMV7_NONSEC) || defined(CONFIG_ARMV7_VIRT)
+/* Set the address at which the secondary core starts from.*/
+void smp_set_core_boot_addr(unsigned long addr, int corenr)
+{
+ struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+
+ out_be32(&gur->scratchrw[0], addr);
+}
+
+/* Release the secondary core from holdoff state and kick it */
+void smp_kick_all_cpus(void)
+{
+ struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+
+ out_be32(&gur->brrl, 0x2);
+}
+#endif
diff --git a/arch/arm/cpu/armv7/ls102xa/fdt.c b/arch/arm/cpu/armv7/ls102xa/fdt.c
index 4ce3808..989780d 100644
--- a/arch/arm/cpu/armv7/ls102xa/fdt.c
+++ b/arch/arm/cpu/armv7/ls102xa/fdt.c
@@ -91,7 +91,7 @@ void ft_cpu_setup(void *blob, bd_t *bd)
}
do_fixup_by_prop_u32(blob, "device_type", "soc",
- 4, "bus-frequency", busclk / 2, 1);
+ 4, "bus-frequency", busclk, 1);
ft_fixup_enet_phy_connect_type(blob);
diff --git a/arch/arm/cpu/armv7/ls102xa/fsl_epu.c b/arch/arm/cpu/armv7/ls102xa/fsl_epu.c
new file mode 100644
index 0000000..6212640
--- /dev/null
+++ b/arch/arm/cpu/armv7/ls102xa/fsl_epu.c
@@ -0,0 +1,57 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+
+#include "fsl_epu.h"
+
+/**
+ * fsl_epu_clean - Clear EPU registers
+ */
+void fsl_epu_clean(void *epu_base)
+{
+ u32 offset;
+
+ /* follow the exact sequence to clear the registers */
+ /* Clear EPACRn */
+ for (offset = EPACR0; offset <= EPACR15; offset += EPACR_STRIDE)
+ out_be32(epu_base + offset, 0);
+
+ /* Clear EPEVTCRn */
+ for (offset = EPEVTCR0; offset <= EPEVTCR9; offset += EPEVTCR_STRIDE)
+ out_be32(epu_base + offset, 0);
+
+ /* Clear EPGCR */
+ out_be32(epu_base + EPGCR, 0);
+
+ /* Clear EPSMCRn */
+ for (offset = EPSMCR0; offset <= EPSMCR15; offset += EPSMCR_STRIDE)
+ out_be32(epu_base + offset, 0);
+
+ /* Clear EPCCRn */
+ for (offset = EPCCR0; offset <= EPCCR31; offset += EPCCR_STRIDE)
+ out_be32(epu_base + offset, 0);
+
+ /* Clear EPCMPRn */
+ for (offset = EPCMPR0; offset <= EPCMPR31; offset += EPCMPR_STRIDE)
+ out_be32(epu_base + offset, 0);
+
+ /* Clear EPCTRn */
+ for (offset = EPCTR0; offset <= EPCTR31; offset += EPCTR_STRIDE)
+ out_be32(epu_base + offset, 0);
+
+ /* Clear EPIMCRn */
+ for (offset = EPIMCR0; offset <= EPIMCR31; offset += EPIMCR_STRIDE)
+ out_be32(epu_base + offset, 0);
+
+ /* Clear EPXTRIGCRn */
+ out_be32(epu_base + EPXTRIGCR, 0);
+
+ /* Clear EPECRn */
+ for (offset = EPECR0; offset <= EPECR15; offset += EPECR_STRIDE)
+ out_be32(epu_base + offset, 0);
+}
diff --git a/arch/arm/cpu/armv7/ls102xa/fsl_epu.h b/arch/arm/cpu/armv7/ls102xa/fsl_epu.h
new file mode 100644
index 0000000..d658aad
--- /dev/null
+++ b/arch/arm/cpu/armv7/ls102xa/fsl_epu.h
@@ -0,0 +1,68 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __FSL_EPU_H
+#define __FSL_EPU_H
+
+#include <asm/types.h>
+
+#define FSL_STRIDE_4B 4
+#define FSL_STRIDE_8B 8
+
+/* Block offsets */
+#define EPU_BLOCK_OFFSET 0x00000000
+
+/* EPGCR (Event Processor Global Control Register) */
+#define EPGCR 0x000
+
+/* EPEVTCR0-9 (Event Processor EVT Pin Control Registers) */
+#define EPEVTCR0 0x050
+#define EPEVTCR9 0x074
+#define EPEVTCR_STRIDE FSL_STRIDE_4B
+
+/* EPXTRIGCR (Event Processor Crosstrigger Control Register) */
+#define EPXTRIGCR 0x090
+
+/* EPIMCR0-31 (Event Processor Input Mux Control Registers) */
+#define EPIMCR0 0x100
+#define EPIMCR31 0x17C
+#define EPIMCR_STRIDE FSL_STRIDE_4B
+
+/* EPSMCR0-15 (Event Processor SCU Mux Control Registers) */
+#define EPSMCR0 0x200
+#define EPSMCR15 0x278
+#define EPSMCR_STRIDE FSL_STRIDE_8B
+
+/* EPECR0-15 (Event Processor Event Control Registers) */
+#define EPECR0 0x300
+#define EPECR15 0x33C
+#define EPECR_STRIDE FSL_STRIDE_4B
+
+/* EPACR0-15 (Event Processor Action Control Registers) */
+#define EPACR0 0x400
+#define EPACR15 0x43C
+#define EPACR_STRIDE FSL_STRIDE_4B
+
+/* EPCCRi0-15 (Event Processor Counter Control Registers) */
+#define EPCCR0 0x800
+#define EPCCR15 0x83C
+#define EPCCR31 0x87C
+#define EPCCR_STRIDE FSL_STRIDE_4B
+
+/* EPCMPR0-15 (Event Processor Counter Compare Registers) */
+#define EPCMPR0 0x900
+#define EPCMPR15 0x93C
+#define EPCMPR31 0x97C
+#define EPCMPR_STRIDE FSL_STRIDE_4B
+
+/* EPCTR0-31 (Event Processor Counter Register) */
+#define EPCTR0 0xA00
+#define EPCTR31 0xA7C
+#define EPCTR_STRIDE FSL_STRIDE_4B
+
+void fsl_epu_clean(void *epu_base);
+
+#endif
diff --git a/arch/arm/cpu/armv7/ls102xa/spl.c b/arch/arm/cpu/armv7/ls102xa/spl.c
new file mode 100644
index 0000000..1dfbf54
--- /dev/null
+++ b/arch/arm/cpu/armv7/ls102xa/spl.c
@@ -0,0 +1,33 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <spl.h>
+
+u32 spl_boot_device(void)
+{
+#ifdef CONFIG_SPL_MMC_SUPPORT
+ return BOOT_DEVICE_MMC1;
+#endif
+ return BOOT_DEVICE_NAND;
+}
+
+u32 spl_boot_mode(void)
+{
+ switch (spl_boot_device()) {
+ case BOOT_DEVICE_MMC1:
+#ifdef CONFIG_SPL_FAT_SUPPORT
+ return MMCSD_MODE_FAT;
+#else
+ return MMCSD_MODE_RAW;
+#endif
+ case BOOT_DEVICE_NAND:
+ return 0;
+ default:
+ puts("spl: error: unsupported device\n");
+ hang();
+ }
+}
diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c
index ab7ac3d..93a02ad 100644
--- a/arch/arm/cpu/armv7/mx6/clock.c
+++ b/arch/arm/cpu/armv7/mx6/clock.c
@@ -443,7 +443,7 @@ int enable_fec_anatop_clock(enum enet_freq freq)
struct anatop_regs __iomem *anatop =
(struct anatop_regs __iomem *)ANATOP_BASE_ADDR;
- if (freq < ENET_25MHz || freq > ENET_125MHz)
+ if (freq < ENET_25MHZ || freq > ENET_125MHZ)
return -EINVAL;
reg = readl(&anatop->pll_enet);
diff --git a/arch/arm/cpu/armv7/nonsec_virt.S b/arch/arm/cpu/armv7/nonsec_virt.S
index 745670e..30d81db 100644
--- a/arch/arm/cpu/armv7/nonsec_virt.S
+++ b/arch/arm/cpu/armv7/nonsec_virt.S
@@ -169,11 +169,11 @@ ENTRY(_nonsec_init)
* we do this here instead.
* But first check if we have the generic timer.
*/
-#ifdef CONFIG_SYS_CLK_FREQ
+#ifdef CONFIG_TIMER_CLK_FREQ
mrc p15, 0, r0, c0, c1, 1 @ read ID_PFR1
and r0, r0, #CPUID_ARM_GENTIMER_MASK @ mask arch timer bits
cmp r0, #(1 << CPUID_ARM_GENTIMER_SHIFT)
- ldreq r1, =CONFIG_SYS_CLK_FREQ
+ ldreq r1, =CONFIG_TIMER_CLK_FREQ
mcreq p15, 0, r1, c14, c0, 0 @ write CNTFRQ
#endif
@@ -191,6 +191,9 @@ ENTRY(smp_waitloop)
wfi
ldr r1, =CONFIG_SMP_PEN_ADDR @ load start address
ldr r1, [r1]
+#ifdef CONFIG_PEN_ADDR_BIG_ENDIAN
+ rev r1, r1
+#endif
cmp r0, r1 @ make sure we dont execute this code
beq smp_waitloop @ again (due to a spurious wakeup)
mov r0, r1
diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c
index fb535eb..cb18908 100644
--- a/arch/arm/cpu/armv7/omap-common/boot-common.c
+++ b/arch/arm/cpu/armv7/omap-common/boot-common.c
@@ -33,8 +33,19 @@ void save_omap_boot_params(void)
* used. But it not correct to assume that romcode structure
* encoding would be same as u-boot. So use the defined offsets.
*/
- gd->arch.omap_boot_params.omap_bootdevice = boot_device =
- *((u8 *)(rom_params + BOOT_DEVICE_OFFSET));
+ boot_device = *((u8 *)(rom_params + BOOT_DEVICE_OFFSET));
+
+#if defined(BOOT_DEVICE_NAND_I2C)
+ /*
+ * Re-map NAND&I2C boot-device to the "normal" NAND boot-device.
+ * Otherwise the SPL boot IF can't handle this device correctly.
+ * Somehow booting with Hynix 4GBit NAND H27U4G8 on Siemens
+ * Draco leads to this boot-device passed to SPL from the BootROM.
+ */
+ if (boot_device == BOOT_DEVICE_NAND_I2C)
+ boot_device = BOOT_DEVICE_NAND;
+#endif
+ gd->arch.omap_boot_params.omap_bootdevice = boot_device;
gd->arch.omap_boot_params.ch_flags =
*((u8 *)(rom_params + CH_FLAGS_OFFSET));
@@ -57,7 +68,7 @@ void save_omap_boot_params(void)
}
}
-#ifdef CONFIG_DRA7XX
+#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
/*
* We get different values for QSPI_1 and QSPI_4 being used, but
* don't actually care about this difference. Rather than
diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c
index c8e9bc8..e601ba1 100644
--- a/arch/arm/cpu/armv7/omap-common/emif-common.c
+++ b/arch/arm/cpu/armv7/omap-common/emif-common.c
@@ -1226,13 +1226,14 @@ void dmm_init(u32 base)
emif1_enabled = 1;
emif2_enabled = 1;
break;
- } else if (valid == 1) {
+ }
+
+ if (valid == 1)
emif1_enabled = 1;
- } else if (valid == 2) {
+
+ if (valid == 2)
emif2_enabled = 1;
- }
}
-
}
static void do_bug0039_workaround(u32 base)
diff --git a/arch/arm/cpu/armv7/omap5/Kconfig b/arch/arm/cpu/armv7/omap5/Kconfig
index 129982c..aca862d 100644
--- a/arch/arm/cpu/armv7/omap5/Kconfig
+++ b/arch/arm/cpu/armv7/omap5/Kconfig
@@ -12,6 +12,9 @@ config TARGET_OMAP5_UEVM
config TARGET_DRA7XX_EVM
bool "TI DRA7XX"
+config TARGET_BEAGLE_X15
+ bool "BeagleBoard X15"
+
endchoice
config SYS_SOC
@@ -20,5 +23,6 @@ config SYS_SOC
source "board/compulab/cm_t54/Kconfig"
source "board/ti/omap5_uevm/Kconfig"
source "board/ti/dra7xx/Kconfig"
+source "board/ti/beagle_x15/Kconfig"
endif
diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c
index 0257383..95f1686 100644
--- a/arch/arm/cpu/armv7/omap5/hw_data.c
+++ b/arch/arm/cpu/armv7/omap5/hw_data.c
@@ -365,31 +365,31 @@ struct vcores_data dra752_volts = {
.mpu.value = VDD_MPU_DRA752,
.mpu.efuse.reg = STD_FUSE_OPP_VMIN_MPU_NOM,
.mpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
- .mpu.addr = TPS659038_REG_ADDR_SMPS12_MPU,
+ .mpu.addr = TPS659038_REG_ADDR_SMPS12,
.mpu.pmic = &tps659038,
.eve.value = VDD_EVE_DRA752,
.eve.efuse.reg = STD_FUSE_OPP_VMIN_DSPEVE_NOM,
.eve.efuse.reg_bits = DRA752_EFUSE_REGBITS,
- .eve.addr = TPS659038_REG_ADDR_SMPS45_EVE,
+ .eve.addr = TPS659038_REG_ADDR_SMPS45,
.eve.pmic = &tps659038,
.gpu.value = VDD_GPU_DRA752,
.gpu.efuse.reg = STD_FUSE_OPP_VMIN_GPU_NOM,
.gpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
- .gpu.addr = TPS659038_REG_ADDR_SMPS6_GPU,
+ .gpu.addr = TPS659038_REG_ADDR_SMPS6,
.gpu.pmic = &tps659038,
.core.value = VDD_CORE_DRA752,
.core.efuse.reg = STD_FUSE_OPP_VMIN_CORE_NOM,
.core.efuse.reg_bits = DRA752_EFUSE_REGBITS,
- .core.addr = TPS659038_REG_ADDR_SMPS7_CORE,
+ .core.addr = TPS659038_REG_ADDR_SMPS7,
.core.pmic = &tps659038,
.iva.value = VDD_IVA_DRA752,
.iva.efuse.reg = STD_FUSE_OPP_VMIN_IVA_NOM,
.iva.efuse.reg_bits = DRA752_EFUSE_REGBITS,
- .iva.addr = TPS659038_REG_ADDR_SMPS8_IVA,
+ .iva.addr = TPS659038_REG_ADDR_SMPS8,
.iva.pmic = &tps659038,
};
@@ -593,7 +593,7 @@ const struct ctrl_ioregs ioregs_dra72x_es1 = {
.ctrl_ddr_ctrl_ext_0 = 0xA2000000,
};
-void hw_data_init(void)
+void __weak hw_data_init(void)
{
u32 omap_rev = omap_revision();
diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c
index ff08ef4..0745d42 100644
--- a/arch/arm/cpu/armv7/omap5/prcm-regs.c
+++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c
@@ -376,6 +376,7 @@ struct omap_sys_ctrl_regs const omap5_ctrl = {
struct omap_sys_ctrl_regs const dra7xx_ctrl = {
.control_status = 0x4A002134,
+ .control_phy_power_usb = 0x4A002370,
.control_phy_power_sata = 0x4A002374,
.control_core_mac_id_0_lo = 0x4A002514,
.control_core_mac_id_0_hi = 0x4A002518,
@@ -800,6 +801,7 @@ struct prcm_regs const dra7xx_prcm = {
.cm_clkmode_dpll_dsp = 0x4a005234,
.cm_shadow_freq_config1 = 0x4a005260,
.cm_clkmode_dpll_gmac = 0x4a0052a8,
+ .cm_coreaon_usb_phy_core_clkctrl = 0x4a008640,
.cm_coreaon_usb_phy2_core_clkctrl = 0x4a008688,
/* cm1.mpu */
@@ -906,6 +908,7 @@ struct prcm_regs const dra7xx_prcm = {
.cm_gmac_gmac_clkctrl = 0x4a0093d0,
.cm_l3init_ocp2scp1_clkctrl = 0x4a0093e0,
.cm_l3init_ocp2scp3_clkctrl = 0x4a0093e8,
+ .cm_l3init_usb_otg_ss_clkctrl = 0x4a0093f0,
/* cm2.l4per */
.cm_l4per_clkstctrl = 0x4a009700,
diff --git a/arch/arm/cpu/armv7/omap5/sdram.c b/arch/arm/cpu/armv7/omap5/sdram.c
index 065199b..7d8cec0 100644
--- a/arch/arm/cpu/armv7/omap5/sdram.c
+++ b/arch/arm/cpu/armv7/omap5/sdram.c
@@ -513,7 +513,7 @@ const struct lpddr2_mr_regs mr_regs = {
.mr16 = MR16_REF_FULL_ARRAY
};
-static void emif_get_ext_phy_ctrl_const_regs(u32 emif_nr,
+void __weak emif_get_ext_phy_ctrl_const_regs(u32 emif_nr,
const u32 **regs,
u32 *size)
{
diff --git a/arch/arm/cpu/armv7/stv0991/Makefile b/arch/arm/cpu/armv7/stv0991/Makefile
new file mode 100644
index 0000000..95641d3
--- /dev/null
+++ b/arch/arm/cpu/armv7/stv0991/Makefile
@@ -0,0 +1,9 @@
+#
+# (C) Copyright 2014
+# Vikas Manocha, ST Microelectronics, vikas.manocha@stcom
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y := timer.o clock.o pinmux.o reset.o
+obj-y += lowlevel.o
diff --git a/arch/arm/cpu/armv7/stv0991/clock.c b/arch/arm/cpu/armv7/stv0991/clock.c
new file mode 100644
index 0000000..70b8a8d
--- /dev/null
+++ b/arch/arm/cpu/armv7/stv0991/clock.c
@@ -0,0 +1,41 @@
+/*
+ * (C) Copyright 2014
+ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/stv0991_cgu.h>
+#include<asm/arch/stv0991_periph.h>
+
+static struct stv0991_cgu_regs *const stv0991_cgu_regs = \
+ (struct stv0991_cgu_regs *) (CGU_BASE_ADDR);
+
+void enable_pll1(void)
+{
+ /* pll1 already configured for 1000Mhz, just need to enable it */
+ writel(readl(&stv0991_cgu_regs->pll1_ctrl) & ~(0x01),
+ &stv0991_cgu_regs->pll1_ctrl);
+}
+
+void clock_setup(int peripheral)
+{
+ switch (peripheral) {
+ case UART_CLOCK_CFG:
+ writel(UART_CLK_CFG, &stv0991_cgu_regs->uart_freq);
+ break;
+ case ETH_CLOCK_CFG:
+ enable_pll1();
+ writel(ETH_CLK_CFG, &stv0991_cgu_regs->eth_freq);
+
+ /* Clock selection for ethernet tx_clk & rx_clk*/
+ writel((readl(&stv0991_cgu_regs->eth_ctrl) & ETH_CLK_MASK)
+ | ETH_CLK_CTRL, &stv0991_cgu_regs->eth_ctrl);
+
+ break;
+ default:
+ break;
+ }
+}
diff --git a/arch/arm/cpu/armv7/stv0991/lowlevel.S b/arch/arm/cpu/armv7/stv0991/lowlevel.S
new file mode 100644
index 0000000..6dafba3
--- /dev/null
+++ b/arch/arm/cpu/armv7/stv0991/lowlevel.S
@@ -0,0 +1,12 @@
+/*
+ * (C) Copyright 2014 stmicroelectronics
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <config.h>
+#include <linux/linkage.h>
+
+ENTRY(lowlevel_init)
+ mov pc, lr
+ENDPROC(lowlevel_init)
diff --git a/arch/arm/cpu/armv7/stv0991/pinmux.c b/arch/arm/cpu/armv7/stv0991/pinmux.c
new file mode 100644
index 0000000..1d086a2
--- /dev/null
+++ b/arch/arm/cpu/armv7/stv0991/pinmux.c
@@ -0,0 +1,62 @@
+/*
+ * (C) Copyright 2014
+ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm/io.h>
+#include <asm/arch/stv0991_creg.h>
+#include <asm/arch/stv0991_periph.h>
+#include <asm/arch/hardware.h>
+
+static struct stv0991_creg *const stv0991_creg = \
+ (struct stv0991_creg *)CREG_BASE_ADDR;
+
+int stv0991_pinmux_config(int peripheral)
+{
+ switch (peripheral) {
+ case UART_GPIOC_30_31:
+ /* SSDA/SSCL pad muxing to UART Rx/Dx */
+ writel((readl(&stv0991_creg->mux12) & GPIOC_31_MUX_MASK) |
+ CFG_GPIOC_31_UART_RX,
+ &stv0991_creg->mux12);
+ writel((readl(&stv0991_creg->mux12) & GPIOC_30_MUX_MASK) |
+ CFG_GPIOC_30_UART_TX,
+ &stv0991_creg->mux12);
+ /* SSDA/SSCL pad config to push pull*/
+ writel((readl(&stv0991_creg->cfg_pad6) & GPIOC_31_MODE_MASK) |
+ CFG_GPIOC_31_MODE_PP,
+ &stv0991_creg->cfg_pad6);
+ writel((readl(&stv0991_creg->cfg_pad6) & GPIOC_30_MODE_MASK) |
+ CFG_GPIOC_30_MODE_HIGH,
+ &stv0991_creg->cfg_pad6);
+ break;
+ case UART_GPIOB_16_17:
+ /* ethernet rx_6/7 to UART Rx/Dx */
+ writel((readl(&stv0991_creg->mux7) & GPIOB_17_MUX_MASK) |
+ CFG_GPIOB_17_UART_RX,
+ &stv0991_creg->mux7);
+ writel((readl(&stv0991_creg->mux7) & GPIOB_16_MUX_MASK) |
+ CFG_GPIOB_16_UART_TX,
+ &stv0991_creg->mux7);
+ break;
+ case ETH_GPIOB_10_31_C_0_4:
+ writel(readl(&stv0991_creg->mux6) & 0x000000FF,
+ &stv0991_creg->mux6);
+ writel(0x00000000, &stv0991_creg->mux7);
+ writel(0x00000000, &stv0991_creg->mux8);
+ writel(readl(&stv0991_creg->mux9) & 0xFFF00000,
+ &stv0991_creg->mux9);
+ /* Ethernet Voltage configuration to 1.8V*/
+ writel((readl(&stv0991_creg->vdd_pad1) & VDD_ETH_PS_MASK) |
+ ETH_VDD_CFG, &stv0991_creg->vdd_pad1);
+ writel((readl(&stv0991_creg->vdd_pad1) & VDD_ETH_PS_MASK) |
+ ETH_M_VDD_CFG, &stv0991_creg->vdd_pad1);
+
+ break;
+ default:
+ break;
+ }
+ return 0;
+}
diff --git a/arch/arm/cpu/armv7/stv0991/reset.c b/arch/arm/cpu/armv7/stv0991/reset.c
new file mode 100644
index 0000000..3384b32
--- /dev/null
+++ b/arch/arm/cpu/armv7/stv0991/reset.c
@@ -0,0 +1,26 @@
+/*
+ * (C) Copyright 2014
+ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/stv0991_wdru.h>
+void reset_cpu(ulong ignored)
+{
+ puts("System is going to reboot ...\n");
+ /*
+ * This 1 second delay will allow the above message
+ * to be printed before reset
+ */
+ udelay((1000 * 1000));
+
+ /* Setting bit 1 of the WDRU unit will reset the SoC */
+ writel(WDRU_RST_SYS, &stv0991_wd_ru_ptr->wdru_ctrl1);
+
+ /* system will restart */
+ while (1)
+ ;
+}
diff --git a/arch/arm/cpu/armv7/stv0991/timer.c b/arch/arm/cpu/armv7/stv0991/timer.c
new file mode 100644
index 0000000..8654b8b
--- /dev/null
+++ b/arch/arm/cpu/armv7/stv0991/timer.c
@@ -0,0 +1,114 @@
+/*
+ * (C) Copyright 2014
+ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch-stv0991/hardware.h>
+#include <asm/arch-stv0991/stv0991_cgu.h>
+#include <asm/arch-stv0991/stv0991_gpt.h>
+
+static struct stv0991_cgu_regs *const stv0991_cgu_regs = \
+ (struct stv0991_cgu_regs *) (CGU_BASE_ADDR);
+
+#define READ_TIMER() (readl(&gpt1_regs_ptr->cnt) & GPT_FREE_RUNNING)
+#define GPT_RESOLUTION (CONFIG_STV0991_HZ_CLOCK / CONFIG_STV0991_HZ)
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define timestamp gd->arch.tbl
+#define lastdec gd->arch.lastinc
+
+int timer_init(void)
+{
+ /* Timer1 clock configuration */
+ writel(TIMER1_CLK_CFG, &stv0991_cgu_regs->tim_freq);
+ writel(readl(&stv0991_cgu_regs->cgu_enable_2) |
+ TIMER1_CLK_EN, &stv0991_cgu_regs->cgu_enable_2);
+
+ /* Stop the timer */
+ writel(readl(&gpt1_regs_ptr->cr1) & ~GPT_CR1_CEN, &gpt1_regs_ptr->cr1);
+ writel(GPT_PRESCALER_128, &gpt1_regs_ptr->psc);
+ /* Configure timer for auto-reload */
+ writel(readl(&gpt1_regs_ptr->cr1) | GPT_MODE_AUTO_RELOAD,
+ &gpt1_regs_ptr->cr1);
+
+ /* load value for free running */
+ writel(GPT_FREE_RUNNING, &gpt1_regs_ptr->arr);
+
+ /* start timer */
+ writel(readl(&gpt1_regs_ptr->cr1) | GPT_CR1_CEN,
+ &gpt1_regs_ptr->cr1);
+
+ /* Reset the timer */
+ lastdec = READ_TIMER();
+ timestamp = 0;
+
+ return 0;
+}
+
+/*
+ * timer without interrupts
+ */
+ulong get_timer(ulong base)
+{
+ return (get_timer_masked() / GPT_RESOLUTION) - base;
+}
+
+void __udelay(unsigned long usec)
+{
+ ulong tmo;
+ ulong start = get_timer_masked();
+ ulong tenudelcnt = CONFIG_STV0991_HZ_CLOCK / (1000 * 100);
+ ulong rndoff;
+
+ rndoff = (usec % 10) ? 1 : 0;
+
+ /* tenudelcnt timer tick gives 10 microsecconds delay */
+ tmo = ((usec / 10) + rndoff) * tenudelcnt;
+
+ while ((ulong) (get_timer_masked() - start) < tmo)
+ ;
+}
+
+ulong get_timer_masked(void)
+{
+ ulong now = READ_TIMER();
+
+ if (now >= lastdec) {
+ /* normal mode */
+ timestamp += now - lastdec;
+ } else {
+ /* we have an overflow ... */
+ timestamp += now + GPT_FREE_RUNNING - lastdec;
+ }
+ lastdec = now;
+
+ return timestamp;
+}
+
+void udelay_masked(unsigned long usec)
+{
+ return udelay(usec);
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+ return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+ return CONFIG_STV0991_HZ;
+}
diff --git a/arch/arm/cpu/armv7/tegra124/Kconfig b/arch/arm/cpu/armv7/tegra124/Kconfig
index 6a1c83a..88f627c 100644
--- a/arch/arm/cpu/armv7/tegra124/Kconfig
+++ b/arch/arm/cpu/armv7/tegra124/Kconfig
@@ -6,6 +6,15 @@ choice
config TARGET_JETSON_TK1
bool "NVIDIA Tegra124 Jetson TK1 board"
+config TARGET_NYAN_BIG
+ bool "Google/NVIDIA Nyan-big Chrombook"
+ help
+ Nyan Big is a Tegra124 clamshell board that is very similar
+ to venice2, but it has a different panel, the sdcard CD and WP
+ sense are flipped, and it has a different revision of the AS3722
+ PMIC. The retail name is the Acer Chromebook 13 CB5-311-T7NN
+ (13.3-inch HD, NVIDIA Tegra K1, 2GB).
+
config TARGET_VENICE2
bool "NVIDIA Tegra124 Venice2"
@@ -15,6 +24,7 @@ config SYS_SOC
default "tegra124"
source "board/nvidia/jetson-tk1/Kconfig"
+source "board/nvidia/nyan-big/Kconfig"
source "board/nvidia/venice2/Kconfig"
endif
diff --git a/arch/arm/cpu/armv7/uniphier/Kconfig b/arch/arm/cpu/armv7/uniphier/Kconfig
index 36b7f11..9760299 100644
--- a/arch/arm/cpu/armv7/uniphier/Kconfig
+++ b/arch/arm/cpu/armv7/uniphier/Kconfig
@@ -5,15 +5,17 @@ config SYS_SOC
default "uniphier"
config SYS_CONFIG_NAME
- default "ph1_pro4" if MACH_PH1_PRO4
- default "ph1_ld4" if MACH_PH1_LD4
- default "ph1_sld8" if MACH_PH1_SLD8
+ default "uniphier"
+
+config UNIPHIER_SMP
+ bool
choice
prompt "UniPhier SoC select"
config MACH_PH1_PRO4
bool "PH1-Pro4"
+ select UNIPHIER_SMP
config MACH_PH1_LD4
bool "PH1-LD4"
@@ -23,6 +25,29 @@ config MACH_PH1_SLD8
endchoice
+choice
+ prompt "UniPhier Support Card select"
+ optional
+
+config PFC_MICRO_SUPPORT_CARD
+ bool "Support card with PFC CPLD"
+ help
+ This option provides support for the expansion board with PFC
+ original address mapping.
+
+ Say Y to use the on-board UART, Ether, LED devices.
+
+config DCC_MICRO_SUPPORT_CARD
+ bool "Support card with DCC CPLD"
+ help
+ This option provides support for the expansion board with DCC-
+ arranged address mapping that is compatible with legacy UniPhier
+ reference boards.
+
+ Say Y to use the on-board UART, Ether, LED devices.
+
+endchoice
+
config CMD_PINMON
bool "Enable boot mode pins monitor command"
depends on !SPL_BUILD
diff --git a/arch/arm/cpu/armv7/uniphier/Makefile b/arch/arm/cpu/armv7/uniphier/Makefile
index 0f64d25..4a7b8a9 100644
--- a/arch/arm/cpu/armv7/uniphier/Makefile
+++ b/arch/arm/cpu/armv7/uniphier/Makefile
@@ -11,6 +11,7 @@ obj-y += cache_uniphier.o
obj-$(CONFIG_BOARD_POSTCLK_INIT) += board_postclk_init.o
obj-y += dram_init.o
obj-$(CONFIG_DISPLAY_CPUINFO) += cpu_info.o
+obj-$(CONFIG_BOARD_EARLY_INIT_R) += board_early_init_r.o
obj-$(CONFIG_BOARD_LATE_INIT) += board_late_init.o
obj-$(CONFIG_UNIPHIER_SMP) += smp.o
obj-$(CONFIG_CMD_PINMON) += cmd_pinmon.o
diff --git a/arch/arm/cpu/armv7/uniphier/board_early_init_r.c b/arch/arm/cpu/armv7/uniphier/board_early_init_r.c
new file mode 100644
index 0000000..cb7e04f
--- /dev/null
+++ b/arch/arm/cpu/armv7/uniphier/board_early_init_r.c
@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) 2014 Panasonic Corporation
+ * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/board.h>
+
+int board_early_init_r(void)
+{
+ uniphier_board_late_init();
+ return 0;
+}
diff --git a/arch/arm/cpu/armv7/uniphier/board_late_init.c b/arch/arm/cpu/armv7/uniphier/board_late_init.c
index 3730020..0622a1e 100644
--- a/arch/arm/cpu/armv7/uniphier/board_late_init.c
+++ b/arch/arm/cpu/armv7/uniphier/board_late_init.c
@@ -26,42 +26,6 @@ static void nand_denali_wp_disable(void)
#endif
}
-static void nand_denali_fixup(void)
-{
-#if defined(CONFIG_NAND_DENALI) && \
- (defined(CONFIG_MACH_PH1_SLD8) || defined(CONFIG_MACH_PH1_PRO4))
- /*
- * The Denali NAND controller on some of UniPhier SoCs does not
- * automatically query the device parameters. For those SoCs,
- * some registers must be set after the device is probed.
- */
- void __iomem *denali_reg = (void __iomem *)CONFIG_SYS_NAND_REGS_BASE;
- struct mtd_info *mtd;
- struct nand_chip *chip;
-
- if (nand_curr_device < 0 ||
- nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE) {
- /* NAND was not detected. Just return. */
- return;
- }
-
- mtd = &nand_info[nand_curr_device];
- chip = mtd->priv;
-
- writel(mtd->erasesize / mtd->writesize, denali_reg + PAGES_PER_BLOCK);
- writel(0, denali_reg + DEVICE_WIDTH);
- writel(mtd->writesize, denali_reg + DEVICE_MAIN_AREA_SIZE);
- writel(mtd->oobsize, denali_reg + DEVICE_SPARE_AREA_SIZE);
- writel(1, denali_reg + DEVICES_CONNECTED);
-
- /*
- * chip->scan_bbt in nand_scan_tail() has been skipped.
- * It should be done in here.
- */
- chip->scan_bbt(mtd);
-#endif
-}
-
int board_late_init(void)
{
puts("MODE: ");
@@ -70,7 +34,6 @@ int board_late_init(void)
case BOOT_DEVICE_MMC1:
printf("eMMC Boot\n");
setenv("bootmode", "emmcboot");
- nand_denali_fixup();
break;
case BOOT_DEVICE_NAND:
printf("NAND Boot\n");
@@ -80,7 +43,6 @@ int board_late_init(void)
case BOOT_DEVICE_NOR:
printf("NOR Boot\n");
setenv("bootmode", "norboot");
- nand_denali_fixup();
break;
default:
printf("Unsupported Boot Mode\n");
diff --git a/arch/arm/cpu/armv7/uniphier/init_page_table.c b/arch/arm/cpu/armv7/uniphier/init_page_table.c
index d273835..a0d10a9 100644
--- a/arch/arm/cpu/armv7/uniphier/init_page_table.c
+++ b/arch/arm/cpu/armv7/uniphier/init_page_table.c
@@ -28,7 +28,12 @@
#define IS_SSC(x) ((IS_SPL_TEXT_AREA(x)) || \
(IS_INIT_STACK_AREA(x)))
#define IS_EXT(x) ((x) < 0x100)
-#define IS_REG(x) (0x500 <= (x) && (x) < 0x700)
+
+/* 0x20000000-0x2fffffff, 0xf0000000-0xffffffff are only used by PH1-sLD3 */
+#define IS_REG(x) (0x200 <= (x) && (x) < 0x300) || \
+ (0x500 <= (x) && (x) < 0x700) || \
+ (0xf00 <= (x))
+
#define IS_DDR(x) (0x800 <= (x) && (x) < 0xf00)
#define MMU_FLAGS(x) (IS_SSC(x)) ? SSC : \
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c
index f113db5..3c82a1a 100644
--- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c
+++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/sbc_init.c
@@ -22,16 +22,7 @@ void sbc_init(void)
writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL12);
writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL14);
- if (readl(SBBASE0) & 0x1) {
- /*
- * Boot Swap Off: boot from mask ROM
- * 0x00000000-0x01ffffff: mask ROM
- * 0x02000000-0x3effffff: memory bank (31MB)
- * 0x03f00000-0x3fffffff: peripherals (1MB)
- */
- writel(0x0000be01, SBBASE0); /* dummy */
- writel(0x0200be01, SBBASE1);
- } else {
+ if (boot_is_swapped()) {
/*
* Boot Swap On: boot from external NOR/SRAM
* 0x02000000-0x03ffffff is a mirror of 0x00000000-0x01ffffff.
@@ -40,6 +31,15 @@ void sbc_init(void)
* 0x01f00000-0x01ffffff, 0x03f00000-0x03ffffff: peripherals
*/
writel(0x0000bc01, SBBASE0);
+ } else {
+ /*
+ * Boot Swap Off: boot from mask ROM
+ * 0x00000000-0x01ffffff: mask ROM
+ * 0x02000000-0x3effffff: memory bank (31MB)
+ * 0x03f00000-0x3fffffff: peripherals (1MB)
+ */
+ writel(0x0000be01, SBBASE0); /* dummy */
+ writel(0x0200be01, SBBASE1);
}
#elif defined(CONFIG_DCC_MICRO_SUPPORT_CARD)
#if !defined(CONFIG_SPL_BUILD)
diff --git a/arch/arm/cpu/armv7/uniphier/support_card.c b/arch/arm/cpu/armv7/uniphier/support_card.c
index 40d4940..419012e 100644
--- a/arch/arm/cpu/armv7/uniphier/support_card.c
+++ b/arch/arm/cpu/armv7/uniphier/support_card.c
@@ -83,6 +83,12 @@ static int support_card_show_revision(void)
}
#endif
+int check_support_card(void)
+{
+ printf("SC: Micro Support Card ");
+ return support_card_show_revision();
+}
+
void support_card_init(void)
{
/*
@@ -94,12 +100,6 @@ void support_card_init(void)
support_card_reset_deassert();
}
-int check_support_card(void)
-{
- printf("SC: Micro Support Card ");
- return support_card_show_revision();
-}
-
#if defined(CONFIG_SMC911X)
#include <netdev.h>
@@ -112,18 +112,14 @@ int board_eth_init(bd_t *bis)
#if !defined(CONFIG_SYS_NO_FLASH)
#include <mtd/cfi_flash.h>
+#include <asm/arch/sbc-regs.h>
-#if CONFIG_SYS_MAX_FLASH_BANKS > 1
-static phys_addr_t flash_banks_list[CONFIG_SYS_MAX_FLASH_BANKS] =
- CONFIG_SYS_FLASH_BANKS_LIST;
+struct memory_bank {
+ phys_addr_t base;
+ unsigned long size;
+};
-phys_addr_t cfi_flash_bank_addr(int i)
-{
- return flash_banks_list[i];
-}
-#endif
-
-int mem_is_flash(phys_addr_t base)
+static int mem_is_flash(const struct memory_bank *mem)
{
const int loop = 128;
u32 *scratch_addr;
@@ -131,8 +127,9 @@ int mem_is_flash(phys_addr_t base)
int ret = 1;
int i;
- scratch_addr = map_physmem(base + 0x01e00000,
- sizeof(u32) * loop, MAP_NOCACHE);
+ /* just in case, use the tail of the memory bank */
+ scratch_addr = map_physmem(mem->base + mem->size - sizeof(u32) * loop,
+ sizeof(u32) * loop, MAP_NOCACHE);
for (i = 0; i < loop; i++, scratch_addr++) {
saved_value = readl(scratch_addr);
@@ -150,31 +147,79 @@ int mem_is_flash(phys_addr_t base)
return ret;
}
-int board_flash_wp_on(void)
+#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD)
+ /* {address, size} */
+static const struct memory_bank memory_banks_boot_swap_off[] = {
+ {0x02000000, 0x01f00000},
+};
+
+static const struct memory_bank memory_banks_boot_swap_on[] = {
+ {0x00000000, 0x01f00000},
+};
+#endif
+
+#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD)
+static const struct memory_bank memory_banks_boot_swap_off[] = {
+ {0x04000000, 0x04000000},
+};
+
+static const struct memory_bank memory_banks_boot_swap_on[] = {
+ {0x00000000, 0x04000000},
+ {0x04000000, 0x04000000},
+};
+#endif
+
+static const struct memory_bank
+*flash_banks_list[CONFIG_SYS_MAX_FLASH_BANKS_DETECT];
+
+phys_addr_t cfi_flash_bank_addr(int i)
{
- int i;
- int ret = 1;
+ return flash_banks_list[i]->base;
+}
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
- if (mem_is_flash(cfi_flash_bank_addr(i))) {
- /*
- * We found at least one flash.
- * We need to return 0 and call flash_init().
- */
- ret = 0;
- }
-#if CONFIG_SYS_MAX_FLASH_BANKS > 1
- else {
- /*
- * We might have a SRAM here.
- * To prevent SRAM data from being destroyed,
- * we set dummy address (SDRAM).
- */
- flash_banks_list[i] = 0x80000000 + 0x10000 * i;
+unsigned long cfi_flash_bank_size(int i)
+{
+ return flash_banks_list[i]->size;
+}
+
+static void detect_num_flash_banks(void)
+{
+ const struct memory_bank *memory_bank, *end;
+
+ cfi_flash_num_flash_banks = 0;
+
+ if (boot_is_swapped()) {
+ memory_bank = memory_banks_boot_swap_on;
+ end = memory_bank + ARRAY_SIZE(memory_banks_boot_swap_on);
+ } else {
+ memory_bank = memory_banks_boot_swap_off;
+ end = memory_bank + ARRAY_SIZE(memory_banks_boot_swap_off);
+ }
+
+ for (; memory_bank < end; memory_bank++) {
+ if (cfi_flash_num_flash_banks >=
+ CONFIG_SYS_MAX_FLASH_BANKS_DETECT)
+ break;
+
+ if (mem_is_flash(memory_bank)) {
+ flash_banks_list[cfi_flash_num_flash_banks] =
+ memory_bank;
+
+ debug("flash bank found: base = 0x%lx, size = 0x%lx\n",
+ memory_bank->base, memory_bank->size);
+ cfi_flash_num_flash_banks++;
}
-#endif
}
- return ret;
+ debug("number of flash banks: %d\n", cfi_flash_num_flash_banks);
+}
+#else /* ONFIG_SYS_NO_FLASH */
+void detect_num_flash_banks(void)
+{
+};
+#endif /* ONFIG_SYS_NO_FLASH */
+
+void support_card_late_init(void)
+{
+ detect_num_flash_banks();
}
-#endif
diff --git a/arch/arm/cpu/armv7/vf610/generic.c b/arch/arm/cpu/armv7/vf610/generic.c
index a26d63e..92aaad9 100644
--- a/arch/arm/cpu/armv7/vf610/generic.c
+++ b/arch/arm/cpu/armv7/vf610/generic.c
@@ -265,20 +265,21 @@ static char *get_reset_cause(void)
cause = readl(&src_regs->srsr);
writel(cause, &src_regs->srsr);
- cause &= 0xff;
- switch (cause) {
- case 0x08:
- return "WDOG";
- case 0x20:
+ if (cause & SRC_SRSR_POR_RST)
+ return "POWER ON RESET";
+ else if (cause & SRC_SRSR_WDOG_A5)
+ return "WDOG A5";
+ else if (cause & SRC_SRSR_WDOG_M4)
+ return "WDOG M4";
+ else if (cause & SRC_SRSR_JTAG_RST)
return "JTAG HIGH-Z";
- case 0x80:
+ else if (cause & SRC_SRSR_SW_RST)
+ return "SW RESET";
+ else if (cause & SRC_SRSR_RESETB)
return "EXTERNAL RESET";
- case 0xfd:
- return "POR";
- default:
+ else
return "unknown reset";
- }
}
int print_cpuinfo(void)
diff --git a/arch/arm/cpu/tegra20-common/pmu.c b/arch/arm/cpu/tegra20-common/pmu.c
index c595f70..36a76a2 100644
--- a/arch/arm/cpu/tegra20-common/pmu.c
+++ b/arch/arm/cpu/tegra20-common/pmu.c
@@ -6,6 +6,7 @@
*/
#include <common.h>
+#include <i2c.h>
#include <tps6586x.h>
#include <asm/io.h>
#include <asm/arch/tegra.h>
@@ -23,9 +24,13 @@
#define VDD_TRANSITION_STEP 0x06 /* 150mv */
#define VDD_TRANSITION_RATE 0x06 /* 3.52mv/us */
+#define PMI_I2C_ADDRESS 0x34 /* chip requires this address */
+
int pmu_set_nominal(void)
{
- int core, cpu, bus;
+ struct udevice *bus, *dev;
+ int core, cpu;
+ int ret;
/* by default, the table has been filled with T25 settings */
switch (tegra_get_chip_sku()) {
@@ -42,12 +47,18 @@ int pmu_set_nominal(void)
return -1;
}
- bus = tegra_i2c_get_dvc_bus_num();
- if (bus == -1) {
+ ret = tegra_i2c_get_dvc_bus(&bus);
+ if (ret) {
debug("%s: Cannot find DVC I2C bus\n", __func__);
- return -1;
+ return ret;
}
- tps6586x_init(bus);
+ ret = i2c_get_chip(bus, PMI_I2C_ADDRESS, &dev);
+ if (ret) {
+ debug("%s: Cannot find DVC I2C chip\n", __func__);
+ return ret;
+ }
+
+ tps6586x_init(dev);
tps6586x_set_pwm_mode(TPS6586X_PWM_SM1);
return tps6586x_adjust_sm0_sm1(core, cpu, VDD_TRANSITION_STEP,
VDD_TRANSITION_RATE, VDD_RELATION);
diff --git a/arch/arm/cpu/u-boot-spl.lds b/arch/arm/cpu/u-boot-spl.lds
index a69b006..a8be204 100644
--- a/arch/arm/cpu/u-boot-spl.lds
+++ b/arch/arm/cpu/u-boot-spl.lds
@@ -32,6 +32,9 @@ SECTIONS
}
. = ALIGN(4);
+ .u_boot_list : {
+ KEEP(*(SORT(.u_boot_list*_i2c_*)));
+ }
. = .;
#ifdef CONFIG_SPL_DM
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 01df9a9..e6a495c 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -31,8 +31,10 @@ dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \
tegra30-tec-ng.dtb \
tegra114-dalmore.dtb \
tegra124-jetson-tk1.dtb \
+ tegra124-nyan-big.dtb \
tegra124-venice2.dtb
dtb-$(CONFIG_ARCH_UNIPHIER) += \
+ uniphier-ph1-sld3-ref.dtb \
uniphier-ph1-pro4-ref.dtb \
uniphier-ph1-ld4-ref.dtb \
uniphier-ph1-sld8-ref.dtb
diff --git a/arch/arm/dts/cros-ec-keyboard.dtsi b/arch/arm/dts/cros-ec-keyboard.dtsi
new file mode 100644
index 0000000..9c7fb0a
--- /dev/null
+++ b/arch/arm/dts/cros-ec-keyboard.dtsi
@@ -0,0 +1,105 @@
+/*
+ * Keyboard dts fragment for devices that use cros-ec-keyboard
+ *
+ * Copyright (c) 2014 Google, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <dt-bindings/input/input.h>
+
+&cros_ec {
+ keyboard-controller {
+ compatible = "google,cros-ec-keyb";
+ keypad,num-rows = <8>;
+ keypad,num-columns = <13>;
+ google,needs-ghost-filter;
+
+ linux,keymap = <
+ MATRIX_KEY(0x00, 0x01, KEY_LEFTMETA)
+ MATRIX_KEY(0x00, 0x02, KEY_F1)
+ MATRIX_KEY(0x00, 0x03, KEY_B)
+ MATRIX_KEY(0x00, 0x04, KEY_F10)
+ MATRIX_KEY(0x00, 0x06, KEY_N)
+ MATRIX_KEY(0x00, 0x08, KEY_EQUAL)
+ MATRIX_KEY(0x00, 0x0a, KEY_RIGHTALT)
+
+ MATRIX_KEY(0x01, 0x01, KEY_ESC)
+ MATRIX_KEY(0x01, 0x02, KEY_F4)
+ MATRIX_KEY(0x01, 0x03, KEY_G)
+ MATRIX_KEY(0x01, 0x04, KEY_F7)
+ MATRIX_KEY(0x01, 0x06, KEY_H)
+ MATRIX_KEY(0x01, 0x08, KEY_APOSTROPHE)
+ MATRIX_KEY(0x01, 0x09, KEY_F9)
+ MATRIX_KEY(0x01, 0x0b, KEY_BACKSPACE)
+
+ MATRIX_KEY(0x02, 0x00, KEY_LEFTCTRL)
+ MATRIX_KEY(0x02, 0x01, KEY_TAB)
+ MATRIX_KEY(0x02, 0x02, KEY_F3)
+ MATRIX_KEY(0x02, 0x03, KEY_T)
+ MATRIX_KEY(0x02, 0x04, KEY_F6)
+ MATRIX_KEY(0x02, 0x05, KEY_RIGHTBRACE)
+ MATRIX_KEY(0x02, 0x06, KEY_Y)
+ MATRIX_KEY(0x02, 0x07, KEY_102ND)
+ MATRIX_KEY(0x02, 0x08, KEY_LEFTBRACE)
+ MATRIX_KEY(0x02, 0x09, KEY_F8)
+
+ MATRIX_KEY(0x03, 0x01, KEY_GRAVE)
+ MATRIX_KEY(0x03, 0x02, KEY_F2)
+ MATRIX_KEY(0x03, 0x03, KEY_5)
+ MATRIX_KEY(0x03, 0x04, KEY_F5)
+ MATRIX_KEY(0x03, 0x06, KEY_6)
+ MATRIX_KEY(0x03, 0x08, KEY_MINUS)
+ MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH)
+
+ MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL)
+ MATRIX_KEY(0x04, 0x01, KEY_A)
+ MATRIX_KEY(0x04, 0x02, KEY_D)
+ MATRIX_KEY(0x04, 0x03, KEY_F)
+ MATRIX_KEY(0x04, 0x04, KEY_S)
+ MATRIX_KEY(0x04, 0x05, KEY_K)
+ MATRIX_KEY(0x04, 0x06, KEY_J)
+ MATRIX_KEY(0x04, 0x08, KEY_SEMICOLON)
+ MATRIX_KEY(0x04, 0x09, KEY_L)
+ MATRIX_KEY(0x04, 0x0a, KEY_BACKSLASH)
+ MATRIX_KEY(0x04, 0x0b, KEY_ENTER)
+
+ MATRIX_KEY(0x05, 0x01, KEY_Z)
+ MATRIX_KEY(0x05, 0x02, KEY_C)
+ MATRIX_KEY(0x05, 0x03, KEY_V)
+ MATRIX_KEY(0x05, 0x04, KEY_X)
+ MATRIX_KEY(0x05, 0x05, KEY_COMMA)
+ MATRIX_KEY(0x05, 0x06, KEY_M)
+ MATRIX_KEY(0x05, 0x07, KEY_LEFTSHIFT)
+ MATRIX_KEY(0x05, 0x08, KEY_SLASH)
+ MATRIX_KEY(0x05, 0x09, KEY_DOT)
+ MATRIX_KEY(0x05, 0x0b, KEY_SPACE)
+
+ MATRIX_KEY(0x06, 0x01, KEY_1)
+ MATRIX_KEY(0x06, 0x02, KEY_3)
+ MATRIX_KEY(0x06, 0x03, KEY_4)
+ MATRIX_KEY(0x06, 0x04, KEY_2)
+ MATRIX_KEY(0x06, 0x05, KEY_8)
+ MATRIX_KEY(0x06, 0x06, KEY_7)
+ MATRIX_KEY(0x06, 0x08, KEY_0)
+ MATRIX_KEY(0x06, 0x09, KEY_9)
+ MATRIX_KEY(0x06, 0x0a, KEY_LEFTALT)
+ MATRIX_KEY(0x06, 0x0b, KEY_DOWN)
+ MATRIX_KEY(0x06, 0x0c, KEY_RIGHT)
+
+ MATRIX_KEY(0x07, 0x01, KEY_Q)
+ MATRIX_KEY(0x07, 0x02, KEY_E)
+ MATRIX_KEY(0x07, 0x03, KEY_R)
+ MATRIX_KEY(0x07, 0x04, KEY_W)
+ MATRIX_KEY(0x07, 0x05, KEY_I)
+ MATRIX_KEY(0x07, 0x06, KEY_U)
+ MATRIX_KEY(0x07, 0x07, KEY_RIGHTSHIFT)
+ MATRIX_KEY(0x07, 0x08, KEY_P)
+ MATRIX_KEY(0x07, 0x09, KEY_O)
+ MATRIX_KEY(0x07, 0x0b, KEY_UP)
+ MATRIX_KEY(0x07, 0x0c, KEY_LEFT)
+ >;
+ };
+};
diff --git a/arch/arm/dts/tegra124-jetson-tk1.dts b/arch/arm/dts/tegra124-jetson-tk1.dts
index ffad116..f6fe9a0 100644
--- a/arch/arm/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/dts/tegra124-jetson-tk1.dts
@@ -16,7 +16,6 @@
i2c2 = "/i2c@7000c400";
i2c3 = "/i2c@7000c500";
i2c4 = "/i2c@7000c700";
- i2c5 = "/i2c@7000d100";
sdhci0 = "/sdhci@700b0600";
sdhci1 = "/sdhci@700b0400";
spi0 = "/spi@7000d400";
diff --git a/arch/arm/dts/tegra124-nyan-big.dts b/arch/arm/dts/tegra124-nyan-big.dts
new file mode 100644
index 0000000..c1f35a0
--- /dev/null
+++ b/arch/arm/dts/tegra124-nyan-big.dts
@@ -0,0 +1,365 @@
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra124.dtsi"
+
+/ {
+ model = "Acer Chromebook 13 CB5-311";
+ compatible = "google,nyan-big", "nvidia,tegra124";
+
+ aliases {
+ console = &uarta;
+ i2c0 = "/i2c@7000d000";
+ i2c1 = "/i2c@7000c000";
+ i2c2 = "/i2c@7000c400";
+ i2c3 = "/i2c@7000c500";
+ i2c4 = "/i2c@7000c700";
+ i2c5 = "/i2c@7000d100";
+ rtc0 = "/i2c@0,7000d000/pmic@40";
+ rtc1 = "/rtc@0,7000e000";
+ sdhci0 = "/sdhci@700b0600";
+ sdhci1 = "/sdhci@700b0400";
+ spi0 = "/spi@7000d400";
+ spi1 = "/spi@7000da00";
+ usb0 = "/usb@7d000000";
+ usb1 = "/usb@7d008000";
+ };
+
+ memory {
+ reg = <0x80000000 0x80000000>;
+ };
+
+ serial@70006000 {
+ /* Debug connector on the bottom of the board near SD card. */
+ status = "okay";
+ };
+
+ pwm@7000a000 {
+ status = "okay";
+ };
+
+ i2c@7000c000 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ acodec: audio-codec@10 {
+ compatible = "maxim,max98090";
+ reg = <0x10>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
+ };
+
+ temperature-sensor@4c {
+ compatible = "ti,tmp451";
+ reg = <0x4c>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+
+ #thermal-sensor-cells = <1>;
+ };
+ };
+
+ i2c@7000c400 {
+ status = "okay";
+ clock-frequency = <100000>;
+ };
+
+ i2c@7000c500 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tpm@20 {
+ compatible = "infineon,slb9645tt";
+ reg = <0x20>;
+ };
+ };
+
+ hdmi_ddc: i2c@7000c700 {
+ status = "okay";
+ clock-frequency = <100000>;
+ };
+
+ i2c@7000d000 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ pmic: pmic@40 {
+ compatible = "ams,as3722";
+ reg = <0x40>;
+ interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
+
+ ams,system-power-controller;
+
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&as3722_default>;
+
+ as3722_default: pinmux {
+ gpio0 {
+ pins = "gpio0";
+ function = "gpio";
+ bias-pull-down;
+ };
+
+ gpio1 {
+ pins = "gpio1";
+ function = "gpio";
+ bias-pull-up;
+ };
+
+ gpio2_4_7 {
+ pins = "gpio2", "gpio4", "gpio7";
+ function = "gpio";
+ bias-pull-up;
+ };
+
+ gpio3_6 {
+ pins = "gpio3", "gpio6";
+ bias-high-impedance;
+ };
+
+ gpio5 {
+ pins = "gpio5";
+ function = "clk32k-out";
+ bias-pull-down;
+ };
+ };
+ };
+ };
+
+ spi@7000d400 {
+ status = "okay";
+
+ cros_ec: cros-ec@0 {
+ compatible = "google,cros-ec-spi";
+ spi-max-frequency = <3000000>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;
+ reg = <0>;
+
+ google,cros-ec-spi-msg-delay = <2000>;
+
+ i2c-tunnel {
+ compatible = "google,cros-ec-i2c-tunnel";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ google,remote-bus = <0>;
+
+ charger: bq24735@9 {
+ compatible = "ti,bq24735";
+ reg = <0x9>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(J, 0)
+ GPIO_ACTIVE_HIGH>;
+ ti,ac-detect-gpios = <&gpio
+ TEGRA_GPIO(J, 0)
+ GPIO_ACTIVE_HIGH>;
+ };
+
+ battery: sbs-battery@b {
+ compatible = "sbs,sbs-battery";
+ reg = <0xb>;
+ sbs,i2c-retry-count = <2>;
+ sbs,poll-retry-count = <10>;
+ power-supplies = <&charger>;
+ };
+ };
+ };
+ };
+
+ spi@7000da00 {
+ status = "okay";
+ spi-max-frequency = <25000000>;
+
+ flash@0 {
+ compatible = "winbond,w25q32dw";
+ reg = <0>;
+ };
+ };
+
+ pmc@7000e400 {
+ nvidia,invert-interrupt;
+ nvidia,suspend-mode = <0>;
+ nvidia,cpu-pwr-good-time = <500>;
+ nvidia,cpu-pwr-off-time = <300>;
+ nvidia,core-pwr-good-time = <641 3845>;
+ nvidia,core-pwr-off-time = <61036>;
+ nvidia,core-power-req-active-high;
+ nvidia,sys-clock-req-active-high;
+ };
+
+ hda@70030000 {
+ status = "okay";
+ };
+
+ sdhci@700b0000 { /* WiFi/BT on this bus */
+ status = "okay";
+ power-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>;
+ bus-width = <4>;
+ no-1-8-v;
+ non-removable;
+ };
+
+ sdhci@700b0400 { /* SD Card on this bus */
+ status = "okay";
+ cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+ power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
+ wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ no-1-8-v;
+ };
+
+ sdhci@700b0600 { /* eMMC on this bus */
+ status = "okay";
+ bus-width = <8>;
+ no-1-8-v;
+ non-removable;
+ };
+
+ ahub@70300000 {
+ i2s@70301100 {
+ status = "okay";
+ };
+ };
+
+ usb@7d000000 { /* Rear external USB port. */
+ status = "okay";
+ };
+
+ usb-phy@7d000000 {
+ status = "okay";
+ };
+
+ usb@7d004000 { /* Internal webcam. */
+ status = "okay";
+ };
+
+ usb-phy@7d004000 {
+ status = "okay";
+ };
+
+ usb@7d008000 { /* Left external USB port. */
+ status = "okay";
+ };
+
+ usb-phy@7d008000 {
+ status = "okay";
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+
+ enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+ pwms = <&pwm 1 1000000>;
+
+ default-brightness-level = <224>;
+ brightness-levels =
+ < 0 1 2 3 4 5 6 7
+ 8 9 10 11 12 13 14 15
+ 16 17 18 19 20 21 22 23
+ 24 25 26 27 28 29 30 31
+ 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47
+ 48 49 50 51 52 53 54 55
+ 56 57 58 59 60 61 62 63
+ 64 65 66 67 68 69 70 71
+ 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87
+ 88 89 90 91 92 93 94 95
+ 96 97 98 99 100 101 102 103
+ 104 105 106 107 108 109 110 111
+ 112 113 114 115 116 117 118 119
+ 120 121 122 123 124 125 126 127
+ 128 129 130 131 132 133 134 135
+ 136 137 138 139 140 141 142 143
+ 144 145 146 147 148 149 150 151
+ 152 153 154 155 156 157 158 159
+ 160 161 162 163 164 165 166 167
+ 168 169 170 171 172 173 174 175
+ 176 177 178 179 180 181 182 183
+ 184 185 186 187 188 189 190 191
+ 192 193 194 195 196 197 198 199
+ 200 201 202 203 204 205 206 207
+ 208 209 210 211 212 213 214 215
+ 216 217 218 219 220 221 222 223
+ 224 225 226 227 228 229 230 231
+ 232 233 234 235 236 237 238 239
+ 240 241 242 243 244 245 246 247
+ 248 249 250 251 252 253 254 255
+ 256>;
+ };
+
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clk32k_in: clock@0 {
+ compatible = "fixed-clock";
+ reg = <0>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ lid {
+ label = "Lid";
+ gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>;
+ linux,input-type = <5>;
+ linux,code = <KEY_RESERVED>;
+ debounce-interval = <1>;
+ gpio-key,wakeup;
+ };
+
+ power {
+ label = "Power";
+ gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ debounce-interval = <30>;
+ gpio-key,wakeup;
+ };
+ };
+
+ panel: panel {
+ compatible = "auo,b133xtn01";
+
+ backlight = <&backlight>;
+ };
+
+ sound {
+ compatible = "nvidia,tegra-audio-max98090-nyan-big",
+ "nvidia,tegra-audio-max98090";
+ nvidia,model = "Acer Chromebook 13";
+
+ nvidia,audio-routing =
+ "Headphones", "HPR",
+ "Headphones", "HPL",
+ "Speakers", "SPKR",
+ "Speakers", "SPKL",
+ "Mic Jack", "MICBIAS",
+ "DMICL", "Int Mic",
+ "DMICR", "Int Mic",
+ "IN34", "Mic Jack";
+
+ nvidia,i2s-controller = <&tegra_i2s1>;
+ nvidia,audio-codec = <&acodec>;
+
+ clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
+ <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+ <&tegra_car TEGRA124_CLK_EXTERN1>;
+ clock-names = "pll_a", "pll_a_out0", "mclk";
+
+ nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>;
+ };
+};
+
+#include "cros-ec-keyboard.dtsi"
diff --git a/arch/arm/dts/tegra124.dtsi b/arch/arm/dts/tegra124.dtsi
index 3288f28..6b5c2be 100644
--- a/arch/arm/dts/tegra124.dtsi
+++ b/arch/arm/dts/tegra124.dtsi
@@ -1,5 +1,6 @@
#include <dt-bindings/clock/tegra124-car.h>
#include <dt-bindings/gpio/tegra-gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include "skeleton.dtsi"
@@ -192,6 +193,16 @@
status = "disabled";
};
+ pwm: pwm@7000a000 {
+ compatible = "nvidia,tegra124-pwm", "nvidia,tegra20-pwm";
+ reg = <0x7000a000 0x100>;
+ #pwm-cells = <2>;
+ clocks = <&tegra_car TEGRA124_CLK_PWM>;
+ resets = <&tegra_car 17>;
+ reset-names = "pwm";
+ status = "disabled";
+ };
+
spi@7000d400 {
compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi";
reg = <0x7000d400 0x200>;
@@ -290,6 +301,109 @@
status = "disabled";
};
+ ahub@70300000 {
+ compatible = "nvidia,tegra124-ahub";
+ reg = <0x70300000 0x200>,
+ <0x70300800 0x800>,
+ <0x70300200 0x600>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA124_CLK_D_AUDIO>,
+ <&tegra_car TEGRA124_CLK_APBIF>;
+ clock-names = "d_audio", "apbif";
+ resets = <&tegra_car 106>, /* d_audio */
+ <&tegra_car 107>, /* apbif */
+ <&tegra_car 30>, /* i2s0 */
+ <&tegra_car 11>, /* i2s1 */
+ <&tegra_car 18>, /* i2s2 */
+ <&tegra_car 101>, /* i2s3 */
+ <&tegra_car 102>, /* i2s4 */
+ <&tegra_car 108>, /* dam0 */
+ <&tegra_car 109>, /* dam1 */
+ <&tegra_car 110>, /* dam2 */
+ <&tegra_car 10>, /* spdif */
+ <&tegra_car 153>, /* amx */
+ <&tegra_car 185>, /* amx1 */
+ <&tegra_car 154>, /* adx */
+ <&tegra_car 180>, /* adx1 */
+ <&tegra_car 186>, /* afc0 */
+ <&tegra_car 187>, /* afc1 */
+ <&tegra_car 188>, /* afc2 */
+ <&tegra_car 189>, /* afc3 */
+ <&tegra_car 190>, /* afc4 */
+ <&tegra_car 191>; /* afc5 */
+ reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
+ "i2s3", "i2s4", "dam0", "dam1", "dam2",
+ "spdif", "amx", "amx1", "adx", "adx1",
+ "afc0", "afc1", "afc2", "afc3", "afc4", "afc5";
+ dmas = <&apbdma 1>, <&apbdma 1>,
+ <&apbdma 2>, <&apbdma 2>,
+ <&apbdma 3>, <&apbdma 3>,
+ <&apbdma 4>, <&apbdma 4>,
+ <&apbdma 6>, <&apbdma 6>,
+ <&apbdma 7>, <&apbdma 7>,
+ <&apbdma 12>, <&apbdma 12>,
+ <&apbdma 13>, <&apbdma 13>,
+ <&apbdma 14>, <&apbdma 14>,
+ <&apbdma 29>, <&apbdma 29>;
+ dma-names = "rx0", "tx0", "rx1", "tx1", "rx2", "tx2",
+ "rx3", "tx3", "rx4", "tx4", "rx5", "tx5",
+ "rx6", "tx6", "rx7", "tx7", "rx8", "tx8",
+ "rx9", "tx9";
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ tegra_i2s0: i2s@70301000 {
+ compatible = "nvidia,tegra124-i2s";
+ reg = <0x70301000 0x100>;
+ nvidia,ahub-cif-ids = <4 4>;
+ clocks = <&tegra_car TEGRA124_CLK_I2S0>;
+ resets = <&tegra_car 30>;
+ reset-names = "i2s";
+ status = "disabled";
+ };
+
+ tegra_i2s1: i2s@70301100 {
+ compatible = "nvidia,tegra124-i2s";
+ reg = <0x70301100 0x100>;
+ nvidia,ahub-cif-ids = <5 5>;
+ clocks = <&tegra_car TEGRA124_CLK_I2S1>;
+ resets = <&tegra_car 11>;
+ reset-names = "i2s";
+ status = "disabled";
+ };
+
+ tegra_i2s2: i2s@70301200 {
+ compatible = "nvidia,tegra124-i2s";
+ reg = <0x70301200 0x100>;
+ nvidia,ahub-cif-ids = <6 6>;
+ clocks = <&tegra_car TEGRA124_CLK_I2S2>;
+ resets = <&tegra_car 18>;
+ reset-names = "i2s";
+ status = "disabled";
+ };
+
+ tegra_i2s3: i2s@70301300 {
+ compatible = "nvidia,tegra124-i2s";
+ reg = <0x70301300 0x100>;
+ nvidia,ahub-cif-ids = <7 7>;
+ clocks = <&tegra_car TEGRA124_CLK_I2S3>;
+ resets = <&tegra_car 101>;
+ reset-names = "i2s";
+ status = "disabled";
+ };
+
+ tegra_i2s4: i2s@70301400 {
+ compatible = "nvidia,tegra124-i2s";
+ reg = <0x70301400 0x100>;
+ nvidia,ahub-cif-ids = <8 8>;
+ clocks = <&tegra_car TEGRA124_CLK_I2S4>;
+ resets = <&tegra_car 102>;
+ reset-names = "i2s";
+ status = "disabled";
+ };
+ };
+
usb@7d000000 {
compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci";
reg = <0x7d000000 0x4000>;
diff --git a/arch/arm/dts/tegra30-tec-ng.dts b/arch/arm/dts/tegra30-tec-ng.dts
index 8a69e81..e924acc 100644
--- a/arch/arm/dts/tegra30-tec-ng.dts
+++ b/arch/arm/dts/tegra30-tec-ng.dts
@@ -6,6 +6,10 @@
model = "Avionic Design Tamonten™ NG Evaluation Carrier";
compatible = "ad,tec-ng", "nvidia,tegra30";
+ aliases {
+ i2c0 = "/i2c@7000c400";
+ };
+
/* GEN2 */
i2c@7000c400 {
status = "okay";
diff --git a/arch/arm/dts/uniphier-ph1-ld4-ref.dts b/arch/arm/dts/uniphier-ph1-ld4-ref.dts
index f01189c..08bbd03 100644
--- a/arch/arm/dts/uniphier-ph1-ld4-ref.dts
+++ b/arch/arm/dts/uniphier-ph1-ld4-ref.dts
@@ -23,20 +23,39 @@
bootargs = "console=ttyPS0,115200 earlyprintk";
stdout-path = &uart0;
};
+
+ aliases {
+ uart0 = &uart0;
+ uart1 = &uart1;
+ uart2 = &uart2;
+ uart3 = &uart3;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ };
};
&uart0 {
- status = "okay";
+ status = "okay";
};
&uart1 {
- status = "okay";
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ eeprom {
+ compatible = "i2c-eeprom";
+ reg = <0x50>;
+ };
};
&usb0 {
- status = "okay";
+ status = "okay";
};
&usb1 {
- status = "okay";
+ status = "okay";
};
diff --git a/arch/arm/dts/uniphier-ph1-ld4.dtsi b/arch/arm/dts/uniphier-ph1-ld4.dtsi
index 80074c5..2a3dd73 100644
--- a/arch/arm/dts/uniphier-ph1-ld4.dtsi
+++ b/arch/arm/dts/uniphier-ph1-ld4.dtsi
@@ -13,8 +13,8 @@
compatible = "panasonic,ph1-ld4";
cpus {
- #size-cells = <0>;
#address-cells = <1>;
+ #size-cells = <0>;
cpu@0 {
device_type = "cpu";
@@ -57,6 +57,42 @@
clock-frequency = <36864000>;
};
+ i2c0: i2c@58400000 {
+ compatible = "panasonic,uniphier-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58400000 0x40>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@58480000 {
+ compatible = "panasonic,uniphier-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58480000 0x40>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@58500000 {
+ compatible = "panasonic,uniphier-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58500000 0x40>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@58580000 {
+ compatible = "panasonic,uniphier-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58580000 0x40>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
usb0: usb@5a800100 {
compatible = "panasonic,uniphier-ehci", "usb-ehci";
status = "disabled";
@@ -74,5 +110,11 @@
status = "disabled";
reg = <0x5a820100 0x100>;
};
+
+ nand: nand@68000000 {
+ compatible = "denali,denali-nand-dt";
+ reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+ reg-names = "nand_data", "denali_reg";
+ };
};
};
diff --git a/arch/arm/dts/uniphier-ph1-pro4-ref.dts b/arch/arm/dts/uniphier-ph1-pro4-ref.dts
index 52fa81f..23add7c 100644
--- a/arch/arm/dts/uniphier-ph1-pro4-ref.dts
+++ b/arch/arm/dts/uniphier-ph1-pro4-ref.dts
@@ -23,20 +23,41 @@
bootargs = "console=ttyPS0,115200 earlyprintk";
stdout-path = &uart0;
};
+
+ aliases {
+ uart0 = &uart0;
+ uart1 = &uart1;
+ uart2 = &uart2;
+ uart3 = &uart3;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ };
};
&uart0 {
- status = "okay";
+ status = "okay";
};
&uart1 {
- status = "okay";
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ eeprom {
+ compatible = "i2c-eeprom";
+ reg = <0x50>;
+ };
};
&usb0 {
- status = "okay";
+ status = "okay";
};
&usb1 {
- status = "okay";
+ status = "okay";
};
diff --git a/arch/arm/dts/uniphier-ph1-pro4.dtsi b/arch/arm/dts/uniphier-ph1-pro4.dtsi
index dd84269..49e375e 100644
--- a/arch/arm/dts/uniphier-ph1-pro4.dtsi
+++ b/arch/arm/dts/uniphier-ph1-pro4.dtsi
@@ -13,8 +13,8 @@
compatible = "panasonic,ph1-pro4";
cpus {
- #size-cells = <0>;
#address-cells = <1>;
+ #size-cells = <0>;
cpu@0 {
device_type = "cpu";
@@ -63,6 +63,62 @@
clock-frequency = <73728000>;
};
+ i2c0: i2c@58780000 {
+ compatible = "panasonic,uniphier-fi2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58780000 0x80>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@58781000 {
+ compatible = "panasonic,uniphier-fi2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58781000 0x80>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@58782000 {
+ compatible = "panasonic,uniphier-fi2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58782000 0x80>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@58783000 {
+ compatible = "panasonic,uniphier-fi2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58783000 0x80>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ /* i2c4 does not exist */
+
+ i2c5: i2c@58785000 {
+ compatible = "panasonic,uniphier-fi2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58785000 0x80>;
+ clock-frequency = <400000>;
+ status = "ok";
+ };
+
+ i2c6: i2c@58786000 {
+ compatible = "panasonic,uniphier-fi2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58786000 0x80>;
+ clock-frequency = <400000>;
+ status = "ok";
+ };
+
usb0: usb@5a800100 {
compatible = "panasonic,uniphier-ehci", "usb-ehci";
status = "disabled";
@@ -74,5 +130,11 @@
status = "disabled";
reg = <0x5a810100 0x100>;
};
+
+ nand: nand@68000000 {
+ compatible = "denali,denali-nand-dt";
+ reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+ reg-names = "nand_data", "denali_reg";
+ };
};
};
diff --git a/arch/arm/dts/uniphier-ph1-sld3-ref.dts b/arch/arm/dts/uniphier-ph1-sld3-ref.dts
new file mode 100644
index 0000000..91b4dbe
--- /dev/null
+++ b/arch/arm/dts/uniphier-ph1-sld3-ref.dts
@@ -0,0 +1,60 @@
+/*
+ * Device Tree Source for UniPhier PH1-sLD3 Reference Board
+ *
+ * Copyright (C) 2014 Panasonic Corporation
+ * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+/include/ "uniphier-ph1-sld3.dtsi"
+
+/ {
+ model = "Panasonic UniPhier PH1-sLD3 Reference Board";
+ compatible = "panasonic,ph1-sld3-ref", "panasonic,ph1-sld3";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyPS0,115200 earlyprintk";
+ stdout-path = &uart0;
+ };
+
+ aliases {
+ uart0 = &uart0;
+ uart1 = &uart1;
+ uart2 = &uart2;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ eeprom {
+ compatible = "i2c-eeprom";
+ reg = <0x50>;
+ };
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
diff --git a/arch/arm/dts/uniphier-ph1-sld3.dtsi b/arch/arm/dts/uniphier-ph1-sld3.dtsi
new file mode 100644
index 0000000..f5529d2
--- /dev/null
+++ b/arch/arm/dts/uniphier-ph1-sld3.dtsi
@@ -0,0 +1,125 @@
+/*
+ * Device Tree Source for UniPhier PH1-sLD3 SoC
+ *
+ * Copyright (C) 2014 Panasonic Corporation
+ * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "panasonic,ph1-sld3";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ uart0: serial@54006800 {
+ compatible = "panasonic,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006800 0x20>;
+ clock-frequency = <36864000>;
+ };
+
+ uart1: serial@54006900 {
+ compatible = "panasonic,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006900 0x20>;
+ clock-frequency = <36864000>;
+ };
+
+ uart2: serial@54006a00 {
+ compatible = "panasonic,uniphier-uart";
+ status = "disabled";
+ reg = <0x54006a00 0x20>;
+ clock-frequency = <36864000>;
+ };
+
+ i2c0: i2c@58400000 {
+ compatible = "panasonic,uniphier-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58400000 0x40>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@58480000 {
+ compatible = "panasonic,uniphier-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58480000 0x40>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@58500000 {
+ compatible = "panasonic,uniphier-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58500000 0x40>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@58580000 {
+ compatible = "panasonic,uniphier-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58580000 0x40>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ usb0: usb@5a800100 {
+ compatible = "panasonic,uniphier-ehci", "usb-ehci";
+ status = "disabled";
+ reg = <0x5a800100 0x100>;
+ };
+
+ usb1: usb@5a810100 {
+ compatible = "panasonic,uniphier-ehci", "usb-ehci";
+ status = "disabled";
+ reg = <0x5a810100 0x100>;
+ };
+
+ usb2: usb@5a820100 {
+ compatible = "panasonic,uniphier-ehci", "usb-ehci";
+ status = "disabled";
+ reg = <0x5a820100 0x100>;
+ };
+
+ usb3: usb@5a830100 {
+ compatible = "panasonic,uniphier-ehci", "usb-ehci";
+ status = "disabled";
+ reg = <0x5a830100 0x100>;
+ };
+
+ nand: nand@f8000000 {
+ compatible = "denali,denali-nand-dt";
+ reg = <0xf8000000 0x20>, <0xf8100000 0x1000>;
+ reg-names = "nand_data", "denali_reg";
+ };
+ };
+};
diff --git a/arch/arm/dts/uniphier-ph1-sld8-ref.dts b/arch/arm/dts/uniphier-ph1-sld8-ref.dts
index ac73aad..a8ce049 100644
--- a/arch/arm/dts/uniphier-ph1-sld8-ref.dts
+++ b/arch/arm/dts/uniphier-ph1-sld8-ref.dts
@@ -23,20 +23,39 @@
bootargs = "console=ttyPS0,115200 earlyprintk";
stdout-path = &uart0;
};
+
+ aliases {
+ uart0 = &uart0;
+ uart1 = &uart1;
+ uart2 = &uart2;
+ uart3 = &uart3;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ };
};
&uart0 {
- status = "okay";
+ status = "okay";
};
&uart1 {
- status = "okay";
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ eeprom {
+ compatible = "i2c-eeprom";
+ reg = <0x50>;
+ };
};
&usb0 {
- status = "okay";
+ status = "okay";
};
&usb1 {
- status = "okay";
+ status = "okay";
};
diff --git a/arch/arm/dts/uniphier-ph1-sld8.dtsi b/arch/arm/dts/uniphier-ph1-sld8.dtsi
index 43a39f5..0ea76e5 100644
--- a/arch/arm/dts/uniphier-ph1-sld8.dtsi
+++ b/arch/arm/dts/uniphier-ph1-sld8.dtsi
@@ -13,8 +13,8 @@
compatible = "panasonic,ph1-sld8";
cpus {
- #size-cells = <0>;
#address-cells = <1>;
+ #size-cells = <0>;
cpu@0 {
device_type = "cpu";
@@ -57,6 +57,42 @@
clock-frequency = <80000000>;
};
+ i2c0: i2c@58400000 {
+ compatible = "panasonic,uniphier-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58400000 0x40>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@58480000 {
+ compatible = "panasonic,uniphier-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58480000 0x40>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@58500000 {
+ compatible = "panasonic,uniphier-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58500000 0x40>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@58580000 {
+ compatible = "panasonic,uniphier-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x58580000 0x40>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
usb0: usb@5a800100 {
compatible = "panasonic,uniphier-ehci", "usb-ehci";
status = "disabled";
@@ -74,5 +110,11 @@
status = "disabled";
reg = <0x5a820100 0x100>;
};
+
+ nand: nand@68000000 {
+ compatible = "denali,denali-nand-dt";
+ reg = <0x68000000 0x20>, <0x68100000 0x1000>;
+ reg-names = "nand_data", "denali_reg";
+ };
};
};
diff --git a/arch/arm/imx-common/cpu.c b/arch/arm/imx-common/cpu.c
index b58df7d..28ccd29 100644
--- a/arch/arm/imx-common/cpu.c
+++ b/arch/arm/imx-common/cpu.c
@@ -206,6 +206,9 @@ void arch_preboot_os(void)
{
#if defined(CONFIG_CMD_SATA)
sata_stop();
+#if defined(CONFIG_MX6)
+ disable_sata_clock();
+#endif
#endif
#if defined(CONFIG_VIDEO_IPUV3)
/* disable video before launching O/S */
diff --git a/arch/arm/include/asm/arch-am33xx/spl.h b/arch/arm/include/asm/arch-am33xx/spl.h
index 8543f43..e756418 100644
--- a/arch/arm/include/asm/arch-am33xx/spl.h
+++ b/arch/arm/include/asm/arch-am33xx/spl.h
@@ -25,6 +25,7 @@
#else
#define BOOT_DEVICE_XIP 2
#define BOOT_DEVICE_NAND 5
+#define BOOT_DEVICE_NAND_I2C 6
#if defined(CONFIG_AM33XX)
#define BOOT_DEVICE_MMC1 8
#define BOOT_DEVICE_MMC2 9 /* eMMC or daughter card */
diff --git a/arch/arm/include/asm/arch-bcm2835/mbox.h b/arch/arm/include/asm/arch-bcm2835/mbox.h
index 61f427d..0289ba6 100644
--- a/arch/arm/include/asm/arch-bcm2835/mbox.h
+++ b/arch/arm/include/asm/arch-bcm2835/mbox.h
@@ -119,6 +119,39 @@ struct bcm2835_mbox_tag_hdr {
* };
*/
+#define BCM2835_MBOX_TAG_GET_BOARD_REV 0x00010002
+
+/*
+ * 0x2..0xf from:
+ * http://raspberryalphaomega.org.uk/2013/02/06/automatic-raspberry-pi-board-revision-detection-model-a-b1-and-b2/
+ * http://www.raspberrypi.org/forums/viewtopic.php?f=63&t=32733
+ * 0x10, 0x11 from swarren's testing
+ */
+#define BCM2835_BOARD_REV_B_I2C0_2 0x2
+#define BCM2835_BOARD_REV_B_I2C0_3 0x3
+#define BCM2835_BOARD_REV_B_I2C1_4 0x4
+#define BCM2835_BOARD_REV_B_I2C1_5 0x5
+#define BCM2835_BOARD_REV_B_I2C1_6 0x6
+#define BCM2835_BOARD_REV_A_7 0x7
+#define BCM2835_BOARD_REV_A_8 0x8
+#define BCM2835_BOARD_REV_A_9 0x9
+#define BCM2835_BOARD_REV_B_REV2_d 0xd
+#define BCM2835_BOARD_REV_B_REV2_e 0xe
+#define BCM2835_BOARD_REV_B_REV2_f 0xf
+#define BCM2835_BOARD_REV_B_PLUS 0x10
+#define BCM2835_BOARD_REV_CM 0x11
+
+struct bcm2835_mbox_tag_get_board_rev {
+ struct bcm2835_mbox_tag_hdr tag_hdr;
+ union {
+ struct {
+ } req;
+ struct {
+ u32 rev;
+ } resp;
+ } body;
+};
+
#define BCM2835_MBOX_TAG_GET_MAC_ADDRESS 0x00010003
struct bcm2835_mbox_tag_get_mac_address {
diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h
index ba86eea..5e934da 100644
--- a/arch/arm/include/asm/arch-ls102xa/config.h
+++ b/arch/arm/include/asm/arch-ls102xa/config.h
@@ -11,11 +11,17 @@
#define OCRAM_BASE_ADDR 0x10000000
#define OCRAM_SIZE 0x00020000
+#define OCRAM_BASE_S_ADDR 0x10010000
+#define OCRAM_S_SIZE 0x00010000
#define CONFIG_SYS_IMMR 0x01000000
+#define CONFIG_SYS_DCSRBAR 0x20000000
+
+#define CONFIG_SYS_DCSR_DCFG_ADDR (CONFIG_SYS_DCSRBAR + 0x00220000)
#define CONFIG_SYS_FSL_DDR_ADDR (CONFIG_SYS_IMMR + 0x00080000)
#define CONFIG_SYS_CCI400_ADDR (CONFIG_SYS_IMMR + 0x00180000)
+#define CONFIG_SYS_FSL_CSU_ADDR (CONFIG_SYS_IMMR + 0x00510000)
#define CONFIG_SYS_IFC_ADDR (CONFIG_SYS_IMMR + 0x00530000)
#define CONFIG_SYS_FSL_ESDHC_ADDR (CONFIG_SYS_IMMR + 0x00560000)
#define CONFIG_SYS_FSL_SCFG_ADDR (CONFIG_SYS_IMMR + 0x00570000)
@@ -52,6 +58,9 @@
#define LPUART_BASE (CONFIG_SYS_IMMR + 0x01950000)
+#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_IMMR + 0x2400000)
+#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_IMMR + 0x2500000)
+
#ifdef CONFIG_DDR_SPD
#define CONFIG_SYS_FSL_DDR_BE
#define CONFIG_VERY_BIG_RAM
diff --git a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
index b0c267c..697d4ca 100644
--- a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
+++ b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
@@ -17,6 +17,9 @@
#define SOC_VER_LS1021 0x11
#define SOC_VER_LS1022 0x12
+#define CCSR_BRR_OFFSET 0xe4
+#define CCSR_SCRATCHRW1_OFFSET 0x200
+
#define RCWSR0_SYS_PLL_RAT_SHIFT 25
#define RCWSR0_SYS_PLL_RAT_MASK 0x1f
#define RCWSR0_MEM_PLL_RAT_SHIFT 16
@@ -29,6 +32,11 @@
#define ARCH_TIMER_CTRL_ENABLE (1 << 0)
#define SYS_COUNTER_CTRL_ENABLE (1 << 24)
+#define DCFG_CCSR_PORSR1_RCW_MASK 0xff800000
+#define DCFG_CCSR_PORSR1_RCW_SRC_I2C 0x24800000
+
+#define DCFG_DCSR_PORCR1 0
+
struct sys_info {
unsigned long freq_processor[CONFIG_MAX_CPUS];
unsigned long freq_systembus;
@@ -98,6 +106,7 @@ struct ccsr_gur {
#define SCFG_ETSECDMAMCR_LE_BD_FR 0xf8001a0f
#define SCFG_ETSECCMCR_GE2_CLK125 0x04000000
#define SCFG_PIXCLKCR_PXCKEN 0x80000000
+#define SCFG_QSPI_CLKSEL 0xc0100000
/* Supplemental Configuration Unit */
struct ccsr_scfg {
diff --git a/arch/arm/include/asm/arch-ls102xa/ls102xa_stream_id.h b/arch/arm/include/asm/arch-ls102xa/ls102xa_stream_id.h
new file mode 100644
index 0000000..abd70fc
--- /dev/null
+++ b/arch/arm/include/asm/arch-ls102xa/ls102xa_stream_id.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __FSL_LS102XA_STREAM_ID_H_
+#define __FSL_LS102XA_STREAM_ID_H_
+
+struct smmu_stream_id {
+ uint16_t offset;
+ uint16_t stream_id;
+ char dev_name[32];
+};
+
+void ls102xa_config_smmu_stream_id(struct smmu_stream_id *id, uint32_t num);
+#endif
diff --git a/arch/arm/include/asm/arch-ls102xa/ns_access.h b/arch/arm/include/asm/arch-ls102xa/ns_access.h
new file mode 100644
index 0000000..b53f699
--- /dev/null
+++ b/arch/arm/include/asm/arch-ls102xa/ns_access.h
@@ -0,0 +1,118 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __FSL_NS_ACCESS_H_
+#define __FSL_NS_ACCESS_H_
+
+enum csu_cslx_access {
+ CSU_NS_SUP_R = 0x08,
+ CSU_NS_SUP_W = 0x80,
+ CSU_NS_SUP_RW = 0x88,
+ CSU_NS_USER_R = 0x04,
+ CSU_NS_USER_W = 0x40,
+ CSU_NS_USER_RW = 0x44,
+ CSU_S_SUP_R = 0x02,
+ CSU_S_SUP_W = 0x20,
+ CSU_S_SUP_RW = 0x22,
+ CSU_S_USER_R = 0x01,
+ CSU_S_USER_W = 0x10,
+ CSU_S_USER_RW = 0x11,
+ CSU_ALL_RW = 0xff,
+};
+
+enum csu_cslx_ind {
+ CSU_CSLX_PCIE2_IO = 0,
+ CSU_CSLX_PCIE1_IO,
+ CSU_CSLX_MG2TPR_IP,
+ CSU_CSLX_IFC_MEM,
+ CSU_CSLX_OCRAM,
+ CSU_CSLX_GIC,
+ CSU_CSLX_PCIE1,
+ CSU_CSLX_OCRAM2,
+ CSU_CSLX_QSPI_MEM,
+ CSU_CSLX_PCIE2,
+ CSU_CSLX_SATA,
+ CSU_CSLX_USB3,
+ CSU_CSLX_SERDES = 32,
+ CSU_CSLX_QDMA,
+ CSU_CSLX_LPUART2,
+ CSU_CSLX_LPUART1,
+ CSU_CSLX_LPUART4,
+ CSU_CSLX_LPUART3,
+ CSU_CSLX_LPUART6,
+ CSU_CSLX_LPUART5,
+ CSU_CSLX_DSPI2 = 40,
+ CSU_CSLX_DSPI1,
+ CSU_CSLX_QSPI,
+ CSU_CSLX_ESDHC,
+ CSU_CSLX_2D_ACE,
+ CSU_CSLX_IFC,
+ CSU_CSLX_I2C1,
+ CSU_CSLX_USB2,
+ CSU_CSLX_I2C3,
+ CSU_CSLX_I2C2,
+ CSU_CSLX_DUART2 = 50,
+ CSU_CSLX_DUART1,
+ CSU_CSLX_WDT2,
+ CSU_CSLX_WDT1,
+ CSU_CSLX_EDMA,
+ CSU_CSLX_SYS_CNT,
+ CSU_CSLX_DMA_MUX2,
+ CSU_CSLX_DMA_MUX1,
+ CSU_CSLX_DDR,
+ CSU_CSLX_QUICC,
+ CSU_CSLX_DCFG_CCU_RCPM = 60,
+ CSU_CSLX_SECURE_BOOTROM,
+ CSU_CSLX_SFP,
+ CSU_CSLX_TMU,
+ CSU_CSLX_SECURE_MONITOR,
+ CSU_CSLX_RESERVED0,
+ CSU_CSLX_ETSEC1,
+ CSU_CSLX_SEC5_5,
+ CSU_CSLX_ETSEC3,
+ CSU_CSLX_ETSEC2,
+ CSU_CSLX_GPIO2 = 70,
+ CSU_CSLX_GPIO1,
+ CSU_CSLX_GPIO4,
+ CSU_CSLX_GPIO3,
+ CSU_CSLX_PLATFORM_CONT,
+ CSU_CSLX_CSU,
+ CSU_CSLX_ASRC,
+ CSU_CSLX_SPDIF,
+ CSU_CSLX_FLEXCAN2,
+ CSU_CSLX_FLEXCAN1,
+ CSU_CSLX_FLEXCAN4 = 80,
+ CSU_CSLX_FLEXCAN3,
+ CSU_CSLX_SAI2,
+ CSU_CSLX_SAI1,
+ CSU_CSLX_SAI4,
+ CSU_CSLX_SAI3,
+ CSU_CSLX_FTM2,
+ CSU_CSLX_FTM1,
+ CSU_CSLX_FTM4,
+ CSU_CSLX_FTM3,
+ CSU_CSLX_FTM6 = 90,
+ CSU_CSLX_FTM5,
+ CSU_CSLX_FTM8,
+ CSU_CSLX_FTM7,
+ CSU_CSLX_COP_DCSR,
+ CSU_CSLX_EPU,
+ CSU_CSLX_GDI,
+ CSU_CSLX_DDI,
+ CSU_CSLX_RESERVED1,
+ CSU_CSLX_USB3_PHY = 117,
+ CSU_CSLX_RESERVED2,
+ CSU_CSLX_MAX,
+};
+
+struct csu_ns_dev {
+ unsigned long ind;
+ uint32_t val;
+};
+
+void enable_devices_ns_access(struct csu_ns_dev *ns_dev, uint32_t num);
+
+#endif
diff --git a/arch/arm/include/asm/arch-ls102xa/spl.h b/arch/arm/include/asm/arch-ls102xa/spl.h
new file mode 100644
index 0000000..26e4ea1
--- /dev/null
+++ b/arch/arm/include/asm/arch-ls102xa/spl.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ASM_ARCH_SPL_H__
+#define __ASM_ARCH_SPL_H__
+
+#define BOOT_DEVICE_NONE 0
+#define BOOT_DEVICE_XIP 1
+#define BOOT_DEVICE_XIPWAIT 2
+#define BOOT_DEVICE_NAND 3
+#define BOOT_DEVICE_ONENAND 4
+#define BOOT_DEVICE_MMC1 5
+#define BOOT_DEVICE_MMC2 6
+#define BOOT_DEVICE_MMC2_2 7
+#define BOOT_DEVICE_SPI 10
+
+#endif /* __ASM_ARCH_SPL_H__ */
diff --git a/arch/arm/include/asm/arch-mx6/clock.h b/arch/arm/include/asm/arch-mx6/clock.h
index 323805c..226a4cd 100644
--- a/arch/arm/include/asm/arch-mx6/clock.h
+++ b/arch/arm/include/asm/arch-mx6/clock.h
@@ -43,10 +43,10 @@ enum mxc_clock {
};
enum enet_freq {
- ENET_25MHz,
- ENET_50MHz,
- ENET_100MHz,
- ENET_125MHz,
+ ENET_25MHZ,
+ ENET_50MHZ,
+ ENET_100MHZ,
+ ENET_125MHZ,
};
u32 imx_get_uartclk(void);
diff --git a/arch/arm/include/asm/arch-mx6/mx6sl_pins.h b/arch/arm/include/asm/arch-mx6/mx6sl_pins.h
index d9db58c..9ded3d8 100644
--- a/arch/arm/include/asm/arch-mx6/mx6sl_pins.h
+++ b/arch/arm/include/asm/arch-mx6/mx6sl_pins.h
@@ -53,5 +53,10 @@ enum {
MX6_PAD_FEC_REF_CLK__FEC_REF_OUT = IOMUX_PAD(0x424, 0x134, 0x10, 0x000, 0, 0),
MX6_PAD_FEC_RX_ER__GPIO_4_19 = IOMUX_PAD(0x0428, 0x0138, 5, 0x0000, 0, 0),
MX6_PAD_FEC_TX_CLK__GPIO_4_21 = IOMUX_PAD(0x0434, 0x0144, 5, 0x0000, 0, 0),
+
+ MX6_PAD_EPDC_PWRCOM__ANATOP_USBOTG1_ID = IOMUX_PAD(0x03D0, 0x00E0, 4, 0x05DC, 0, 0),
+
+ MX6_PAD_KEY_COL4__USB_USBOTG1_PWR = IOMUX_PAD(0x0484, 0x017C, 6, 0x0000, 0, 0),
+ MX6_PAD_KEY_COL5__USB_USBOTG2_PWR = IOMUX_PAD(0x0488, 0x0180, 6, 0x0000, 0, 0),
};
#endif /* __ASM_ARCH_MX6_MX6SL_PINS_H__ */
diff --git a/arch/arm/include/asm/arch-omap5/clock.h b/arch/arm/include/asm/arch-omap5/clock.h
index 30d9de2..0dc584b 100644
--- a/arch/arm/include/asm/arch-omap5/clock.h
+++ b/arch/arm/include/asm/arch-omap5/clock.h
@@ -278,11 +278,11 @@
/* TPS659038 */
#define TPS659038_I2C_SLAVE_ADDR 0x58
-#define TPS659038_REG_ADDR_SMPS12_MPU 0x23
-#define TPS659038_REG_ADDR_SMPS45_EVE 0x2B
-#define TPS659038_REG_ADDR_SMPS6_GPU 0x2F
-#define TPS659038_REG_ADDR_SMPS7_CORE 0x33
-#define TPS659038_REG_ADDR_SMPS8_IVA 0x37
+#define TPS659038_REG_ADDR_SMPS12 0x23
+#define TPS659038_REG_ADDR_SMPS45 0x2B
+#define TPS659038_REG_ADDR_SMPS6 0x2F
+#define TPS659038_REG_ADDR_SMPS7 0x33
+#define TPS659038_REG_ADDR_SMPS8 0x37
/* TPS */
#define TPS62361_I2C_SLAVE_ADDR 0x60
@@ -314,7 +314,7 @@
*/
#define CONFIG_DEFAULT_OMAP_RESET_TIME_MAX_USEC 31219
-#ifdef CONFIG_DRA7XX
+#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
#define V_OSCK 20000000 /* Clock output from T2 */
#else
#define V_OSCK 19200000 /* Clock output from T2 */
diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h
index b9600cf..e218159 100644
--- a/arch/arm/include/asm/arch-omap5/omap.h
+++ b/arch/arm/include/asm/arch-omap5/omap.h
@@ -27,7 +27,7 @@
#define CONTROL_CORE_ID_CODE 0x4A002204
#define CONTROL_WKUP_ID_CODE 0x4AE0C204
-#ifdef CONFIG_DRA7XX
+#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
#define CONTROL_ID_CODE CONTROL_WKUP_ID_CODE
#else
#define CONTROL_ID_CODE CONTROL_CORE_ID_CODE
@@ -163,7 +163,7 @@ struct s32ktimer {
* much larger) and do not, at this time, make use of the additional
* space.
*/
-#ifdef CONFIG_DRA7XX
+#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
#define NON_SECURE_SRAM_START 0x40300000
#define NON_SECURE_SRAM_END 0x40380000 /* Not inclusive */
#else
diff --git a/arch/arm/include/asm/arch-rmobile/mmc.h b/arch/arm/include/asm/arch-rmobile/mmc.h
new file mode 100644
index 0000000..4e0fef1
--- /dev/null
+++ b/arch/arm/include/asm/arch-rmobile/mmc.h
@@ -0,0 +1,14 @@
+/*
+ * Renesas SuperH MMCIF driver.
+ *
+ * Copyright (C) 2014 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+#ifndef _RMOBILE_MMC_H_
+#define _RMOBILE_MMC_H_
+
+int mmcif_mmc_init(void);
+
+#endif /* _RMOBILE_MMC_H_ */
diff --git a/arch/arm/include/asm/arch-rmobile/r8a7790.h b/arch/arm/include/asm/arch-rmobile/r8a7790.h
index de14869..132d58c 100644
--- a/arch/arm/include/asm/arch-rmobile/r8a7790.h
+++ b/arch/arm/include/asm/arch-rmobile/r8a7790.h
@@ -15,6 +15,19 @@
#define CONFIG_SYS_I2C_SH_BASE2 0xE6520000
#define CONFIG_SYS_I2C_SH_BASE3 0xE60B0000
+/* Module stop control/status register bits */
+#define MSTP0_BITS 0x00640801
+#define MSTP1_BITS 0xDB6E9BDF
+#define MSTP2_BITS 0x300DA1FC
+#define MSTP3_BITS 0xF08CF831
+#define MSTP4_BITS 0x80000184
+#define MSTP5_BITS 0x44C00046
+#define MSTP7_BITS 0x07F30718
+#define MSTP8_BITS 0x01F0FF84
+#define MSTP9_BITS 0xF5979FCF
+#define MSTP10_BITS 0xFFFEFFE0
+#define MSTP11_BITS 0x00000000
+
#define R8A7790_CUT_ES2X 2
#define IS_R8A7790_ES2() \
(rmobile_get_cpu_rev_integer() == R8A7790_CUT_ES2X)
diff --git a/arch/arm/include/asm/arch-rmobile/r8a7791.h b/arch/arm/include/asm/arch-rmobile/r8a7791.h
index 26a0bd5..d2cbcd7 100644
--- a/arch/arm/include/asm/arch-rmobile/r8a7791.h
+++ b/arch/arm/include/asm/arch-rmobile/r8a7791.h
@@ -51,6 +51,19 @@
#define DBSC3_1_QOS_W15_BASE 0xE67A2F00
#define DBSC3_1_DBADJ2 0xE67A00C8
+/* Module stop control/status register bits */
+#define MSTP0_BITS 0x00640801
+#define MSTP1_BITS 0x9B6C9B5A
+#define MSTP2_BITS 0x100D21FC
+#define MSTP3_BITS 0xF08CD810
+#define MSTP4_BITS 0x800001C4
+#define MSTP5_BITS 0x44C00046
+#define MSTP7_BITS 0x05BFE618
+#define MSTP8_BITS 0x40C0FE85
+#define MSTP9_BITS 0xFF979FFF
+#define MSTP10_BITS 0xFFFEFFE0
+#define MSTP11_BITS 0x000001C0
+
#define R8A7791_CUT_ES2X 2
#define IS_R8A7791_ES2() \
(rmobile_get_cpu_rev_integer() == R8A7791_CUT_ES2X)
diff --git a/arch/arm/include/asm/arch-rmobile/r8a7793.h b/arch/arm/include/asm/arch-rmobile/r8a7793.h
index 778812e..1abdeb7 100644
--- a/arch/arm/include/asm/arch-rmobile/r8a7793.h
+++ b/arch/arm/include/asm/arch-rmobile/r8a7793.h
@@ -56,6 +56,20 @@
/*
* R8A7793 I/O Product Information
*/
+
+/* Module stop control/status register bits */
+#define MSTP0_BITS 0x00640801
+#define MSTP1_BITS 0x9B6C9B5A
+#define MSTP2_BITS 0x100D21FC
+#define MSTP3_BITS 0xF08CD810
+#define MSTP4_BITS 0x800001C4
+#define MSTP5_BITS 0x44C00046
+#define MSTP7_BITS 0x05BFE618
+#define MSTP8_BITS 0x40C0FE85
+#define MSTP9_BITS 0xFF979FFF
+#define MSTP10_BITS 0xFFFEFFE0
+#define MSTP11_BITS 0x000001C0
+
#define R8A7793_CUT_ES2X 2
#define IS_R8A7793_ES2() \
(rmobile_get_cpu_rev_integer() == R8A7793_CUT_ES2X)
diff --git a/arch/arm/include/asm/arch-rmobile/r8a7794.h b/arch/arm/include/asm/arch-rmobile/r8a7794.h
index 66d5a29..d7c9004 100644
--- a/arch/arm/include/asm/arch-rmobile/r8a7794.h
+++ b/arch/arm/include/asm/arch-rmobile/r8a7794.h
@@ -14,4 +14,17 @@
/* SH-I2C */
#define CONFIG_SYS_I2C_SH_BASE2 0xE60B0000
+/* Module stop control/status register bits */
+#define MSTP0_BITS 0x00440801
+#define MSTP1_BITS 0x936899DA
+#define MSTP2_BITS 0x100D21FC
+#define MSTP3_BITS 0xE084D810
+#define MSTP4_BITS 0x800001C4
+#define MSTP5_BITS 0x40C00044
+#define MSTP7_BITS 0x013FE618
+#define MSTP8_BITS 0x40803C05
+#define MSTP9_BITS 0xFB879FEE
+#define MSTP10_BITS 0xFFFEFFE0
+#define MSTP11_BITS 0x000001C0
+
#endif /* __ASM_ARCH_R8A7794_H */
diff --git a/arch/arm/include/asm/arch-rmobile/rcar-base.h b/arch/arm/include/asm/arch-rmobile/rcar-base.h
index dbbebcf..23c4bba 100644
--- a/arch/arm/include/asm/arch-rmobile/rcar-base.h
+++ b/arch/arm/include/asm/arch-rmobile/rcar-base.h
@@ -29,6 +29,45 @@
#define SCIF4_BASE 0xE6EE0000
#define SCIF5_BASE 0xE6EE8000
+/* Module stop status register */
+#define MSTPSR0 0xE6150030
+#define MSTPSR1 0xE6150038
+#define MSTPSR2 0xE6150040
+#define MSTPSR3 0xE6150048
+#define MSTPSR4 0xE615004C
+#define MSTPSR5 0xE615003C
+#define MSTPSR7 0xE61501C4
+#define MSTPSR8 0xE61509A0
+#define MSTPSR9 0xE61509A4
+#define MSTPSR10 0xE61509A8
+#define MSTPSR11 0xE61509AC
+
+/* Realtime module stop control register */
+#define RMSTPCR0 0xE6150110
+#define RMSTPCR1 0xE6150114
+#define RMSTPCR2 0xE6150118
+#define RMSTPCR3 0xE615011C
+#define RMSTPCR4 0xE6150120
+#define RMSTPCR5 0xE6150124
+#define RMSTPCR7 0xE615012C
+#define RMSTPCR8 0xE6150980
+#define RMSTPCR9 0xE6150984
+#define RMSTPCR10 0xE6150988
+#define RMSTPCR11 0xE615098C
+
+/* System module stop control register */
+#define SMSTPCR0 0xE6150130
+#define SMSTPCR1 0xE6150134
+#define SMSTPCR2 0xE6150138
+#define SMSTPCR3 0xE615013C
+#define SMSTPCR4 0xE6150140
+#define SMSTPCR5 0xE6150144
+#define SMSTPCR7 0xE615014C
+#define SMSTPCR8 0xE6150990
+#define SMSTPCR9 0xE6150994
+#define SMSTPCR10 0xE6150998
+#define SMSTPCR11 0xE615099C
+
/*
* SH-I2C
* Ch2 and ch3 are different address. These are defined
diff --git a/arch/arm/include/asm/arch-rmobile/rcar-mstp.h b/arch/arm/include/asm/arch-rmobile/rcar-mstp.h
new file mode 100644
index 0000000..9a564f8
--- /dev/null
+++ b/arch/arm/include/asm/arch-rmobile/rcar-mstp.h
@@ -0,0 +1,109 @@
+/*
+ * arch/arm/include/asm/arch-rmobile/rcar-mstp.h
+ *
+ * Copyright (C) 2013, 2014 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
+ * Copyright (C) 2013, 2014 Renesas Electronics Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef __ASM_ARCH_RCAR_MSTP_H
+#define __ASM_ARCH_RCAR_MSTP_H
+
+#define mstp_setbits(type, addr, saddr, set) \
+ out_##type((saddr), in_##type(addr) | (set))
+#define mstp_clrbits(type, addr, saddr, clear) \
+ out_##type((saddr), in_##type(addr) & ~(clear))
+#define mstp_setclrbits(type, addr, set, clear) \
+ out_##type((addr), (in_##type(addr) | (set)) & ~(clear))
+#define mstp_setbits_le32(addr, saddr, set) \
+ mstp_setbits(le32, addr, saddr, set)
+#define mstp_clrbits_le32(addr, saddr, clear) \
+ mstp_clrbits(le32, addr, saddr, clear)
+#define mstp_setclrbits_le32(addr, set, clear) \
+ mstp_setclrbits(le32, addr, set, clear)
+
+#ifndef CONFIG_SMSTP0_ENA
+#define CONFIG_SMSTP0_ENA 0x00
+#endif
+#ifndef CONFIG_SMSTP1_ENA
+#define CONFIG_SMSTP1_ENA 0x00
+#endif
+#ifndef CONFIG_SMSTP2_ENA
+#define CONFIG_SMSTP2_ENA 0x00
+#endif
+#ifndef CONFIG_SMSTP3_ENA
+#define CONFIG_SMSTP3_ENA 0x00
+#endif
+#ifndef CONFIG_SMSTP4_ENA
+#define CONFIG_SMSTP4_ENA 0x00
+#endif
+#ifndef CONFIG_SMSTP5_ENA
+#define CONFIG_SMSTP5_ENA 0x00
+#endif
+#ifndef CONFIG_SMSTP6_ENA
+#define CONFIG_SMSTP6_ENA 0x00
+#endif
+#ifndef CONFIG_SMSTP7_ENA
+#define CONFIG_SMSTP7_ENA 0x00
+#endif
+#ifndef CONFIG_SMSTP8_ENA
+#define CONFIG_SMSTP8_ENA 0x00
+#endif
+#ifndef CONFIG_SMSTP9_ENA
+#define CONFIG_SMSTP9_ENA 0x00
+#endif
+#ifndef CONFIG_SMSTP10_ENA
+#define CONFIG_SMSTP10_ENA 0x00
+#endif
+#ifndef CONFIG_SMSTP11_ENA
+#define CONFIG_SMSTP11_ENA 0x00
+#endif
+
+#ifndef CONFIG_RMSTP0_ENA
+#define CONFIG_RMSTP0_ENA 0x00
+#endif
+#ifndef CONFIG_RMSTP1_ENA
+#define CONFIG_RMSTP1_ENA 0x00
+#endif
+#ifndef CONFIG_RMSTP2_ENA
+#define CONFIG_RMSTP2_ENA 0x00
+#endif
+#ifndef CONFIG_RMSTP3_ENA
+#define CONFIG_RMSTP3_ENA 0x00
+#endif
+#ifndef CONFIG_RMSTP4_ENA
+#define CONFIG_RMSTP4_ENA 0x00
+#endif
+#ifndef CONFIG_RMSTP5_ENA
+#define CONFIG_RMSTP5_ENA 0x00
+#endif
+#ifndef CONFIG_RMSTP6_ENA
+#define CONFIG_RMSTP6_ENA 0x00
+#endif
+#ifndef CONFIG_RMSTP7_ENA
+#define CONFIG_RMSTP7_ENA 0x00
+#endif
+#ifndef CONFIG_RMSTP8_ENA
+#define CONFIG_RMSTP8_ENA 0x00
+#endif
+#ifndef CONFIG_RMSTP9_ENA
+#define CONFIG_RMSTP9_ENA 0x00
+#endif
+#ifndef CONFIG_RMSTP10_ENA
+#define CONFIG_RMSTP10_ENA 0x00
+#endif
+#ifndef CONFIG_RMSTP11_ENA
+#define CONFIG_RMSTP11_ENA 0x00
+#endif
+
+struct mstp_ctl {
+ u32 s_addr;
+ u32 s_dis;
+ u32 s_ena;
+ u32 r_addr;
+ u32 r_dis;
+ u32 r_ena;
+};
+
+#endif /* __ASM_ARCH_RCAR_MSTP_H */
diff --git a/arch/arm/include/asm/arch-stv0991/gpio.h b/arch/arm/include/asm/arch-stv0991/gpio.h
new file mode 100644
index 0000000..9131ded
--- /dev/null
+++ b/arch/arm/include/asm/arch-stv0991/gpio.h
@@ -0,0 +1,22 @@
+/*
+ * (C) Copyright 2014
+ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ASM_ARCH_STV0991_GPIO_H
+#define __ASM_ARCH_STV0991_GPIO_H
+
+enum gpio_direction {
+ GPIO_DIRECTION_IN,
+ GPIO_DIRECTION_OUT,
+};
+
+struct gpio_regs {
+ u32 data; /* offset 0x0 */
+ u32 reserved[0xff]; /* 0x4--0x3fc */
+ u32 dir; /* offset 0x400 */
+};
+
+#endif /* __ASM_ARCH_STV0991_GPIO_H */
diff --git a/arch/arm/include/asm/arch-stv0991/hardware.h b/arch/arm/include/asm/arch-stv0991/hardware.h
new file mode 100644
index 0000000..3f6bcaf
--- /dev/null
+++ b/arch/arm/include/asm/arch-stv0991/hardware.h
@@ -0,0 +1,73 @@
+/*
+ * (C) Copyright 2014
+ * Vikas Manocha, STMicroelectronics, <vikas.manocha@st.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _ASM_ARCH_HARDWARE_H
+#define _ASM_ARCH_HARDWARE_H
+
+/* STV0991 */
+#define SRAM0_BASE_ADDR 0x00000000UL
+#define SRAM1_BASE_ADDR 0x00068000UL
+#define SRAM2_BASE_ADDR 0x000D0000UL
+#define SRAM3_BASE_ADDR 0x00138000UL
+#define CFS_SRAM0_BASE_ADDR 0x00198000UL
+#define CFS_SRAM1_BASE_ADDR 0x001B8000UL
+#define FAST_SRAM_BASE_ADDR 0x001D8000UL
+#define FLASH_BASE_ADDR 0x40000000UL
+#define PL310_BASE_ADDR 0x70000000UL
+#define HSAXIM_BASE_ADDR 0x70100000UL
+#define IMGSS_BASE_ADDR 0x70200000UL
+#define ADC_BASE_ADDR 0x80000000UL
+#define GPIOA_BASE_ADDR 0x80001000UL
+#define GPIOB_BASE_ADDR 0x80002000UL
+#define GPIOC_BASE_ADDR 0x80003000UL
+#define HDM_BASE_ADDR 0x80004000UL
+#define THSENS_BASE_ADDR 0x80200000UL
+#define GPTIMER2_BASE_ADDR 0x80201000UL
+#define GPTIMER1_BASE_ADDR 0x80202000UL
+#define QSPI_BASE_ADDR 0x80203000UL
+#define CGU_BASE_ADDR 0x80204000UL
+#define CREG_BASE_ADDR 0x80205000UL
+#define PEC_BASE_ADDR 0x80206000UL
+#define WDRU_BASE_ADDR 0x80207000UL
+#define BSEC_BASE_ADDR 0x80208000UL
+#define DAP_ROM_BASE_ADDR 0x80210000UL
+#define SOC_CTI_BASE_ADDR 0x80211000UL
+#define TPIU_BASE_ADDR 0x80212000UL
+#define TMC_ETF_BASE_ADDR 0x80213000UL
+#define R4_ETM_BASE_ADDR 0x80214000UL
+#define R4_CTI_BASE_ADDR 0x80215000UL
+#define R4_DBG_BASE_ADDR 0x80216000UL
+#define GMAC_BASE_ADDR 0x80300000UL
+#define RNSS_BASE_ADDR 0x80302000UL
+#define CRYP_BASE_ADDR 0x80303000UL
+#define HASH_BASE_ADDR 0x80304000UL
+#define GPDMA_BASE_ADDR 0x80305000UL
+#define ISA_BASE_ADDR 0x8032A000UL
+#define HCI_BASE_ADDR 0x80400000UL
+#define I2C1_BASE_ADDR 0x80401000UL
+#define I2C2_BASE_ADDR 0x80402000UL
+#define SAI_BASE_ADDR 0x80403000UL
+#define USI_BASE_ADDR 0x80404000UL
+#define SPI1_BASE_ADDR 0x80405000UL
+#define UART_BASE_ADDR 0x80406000UL
+#define SPI2_BASE_ADDR 0x80500000UL
+#define CAN_BASE_ADDR 0x80501000UL
+#define USART1_BASE_ADDR 0x80502000UL
+#define USART2_BASE_ADDR 0x80503000UL
+#define USART3_BASE_ADDR 0x80504000UL
+#define USART4_BASE_ADDR 0x80505000UL
+#define USART5_BASE_ADDR 0x80506000UL
+#define USART6_BASE_ADDR 0x80507000UL
+#define SDI2_BASE_ADDR 0x80600000UL
+#define SDI1_BASE_ADDR 0x80601000UL
+#define VICA_BASE_ADDR 0x81000000UL
+#define VICB_BASE_ADDR 0x81001000UL
+#define STM_CHANNELS_BASE_ADDR 0x81100000UL
+#define STM_BASE_ADDR 0x81110000UL
+#define SROM_BASE_ADDR 0xFFFF0000UL
+
+#endif /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/include/asm/arch-stv0991/stv0991_cgu.h b/arch/arm/include/asm/arch-stv0991/stv0991_cgu.h
new file mode 100644
index 0000000..ddcbb57
--- /dev/null
+++ b/arch/arm/include/asm/arch-stv0991/stv0991_cgu.h
@@ -0,0 +1,116 @@
+/*
+ * (C) Copyright 2014
+ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _STV0991_CGU_H
+#define _STV0991_CGU_H
+
+struct stv0991_cgu_regs {
+ u32 cpu_freq; /* offset 0x0 */
+ u32 icn2_freq; /* offset 0x4 */
+ u32 dma_freq; /* offset 0x8 */
+ u32 isp_freq; /* offset 0xc */
+ u32 h264_freq; /* offset 0x10 */
+ u32 osif_freq; /* offset 0x14 */
+ u32 ren_freq; /* offset 0x18 */
+ u32 tim_freq; /* offset 0x1c */
+ u32 sai_freq; /* offset 0x20 */
+ u32 eth_freq; /* offset 0x24 */
+ u32 i2c_freq; /* offset 0x28 */
+ u32 spi_freq; /* offset 0x2c */
+ u32 uart_freq; /* offset 0x30 */
+ u32 qspi_freq; /* offset 0x34 */
+ u32 sdio_freq; /* offset 0x38 */
+ u32 usi_freq; /* offset 0x3c */
+ u32 can_line_freq; /* offset 0x40 */
+ u32 debug_freq; /* offset 0x44 */
+ u32 trace_freq; /* offset 0x48 */
+ u32 stm_freq; /* offset 0x4c */
+ u32 eth_ctrl; /* offset 0x50 */
+ u32 reserved[3]; /* offset 0x54 */
+ u32 osc_ctrl; /* offset 0x60 */
+ u32 pll1_ctrl; /* offset 0x64 */
+ u32 pll1_freq; /* offset 0x68 */
+ u32 pll1_fract; /* offset 0x6c */
+ u32 pll1_spread; /* offset 0x70 */
+ u32 pll1_status; /* offset 0x74 */
+ u32 pll2_ctrl; /* offset 0x78 */
+ u32 pll2_freq; /* offset 0x7c */
+ u32 pll2_fract; /* offset 0x80 */
+ u32 pll2_spread; /* offset 0x84 */
+ u32 pll2_status; /* offset 0x88 */
+ u32 cgu_enable_1; /* offset 0x8c */
+ u32 cgu_enable_2; /* offset 0x90 */
+ u32 cgu_isp_pulse; /* offset 0x94 */
+ u32 cgu_h264_pulse; /* offset 0x98 */
+ u32 cgu_osif_pulse; /* offset 0x9c */
+ u32 cgu_ren_pulse; /* offset 0xa0 */
+
+};
+
+/* CGU Timer */
+#define CLK_TMR_OSC 0
+#define CLK_TMR_MCLK 1
+#define CLK_TMR_PLL1 2
+#define CLK_TMR_PLL2 3
+#define MDIV_SHIFT_TMR 3
+#define DIV_SHIFT_TMR 6
+
+#define TIMER1_CLK_CFG (0 << DIV_SHIFT_TMR \
+ | 0 << MDIV_SHIFT_TMR | CLK_TMR_MCLK)
+
+/* Clock Enable/Disable */
+
+#define TIMER1_CLK_EN (1 << 15)
+
+/* CGU Uart config */
+#define CLK_UART_MCLK 0
+#define CLK_UART_PLL1 1
+#define CLK_UART_PLL2 2
+
+#define MDIV_SHIFT_UART 3
+#define DIV_SHIFT_UART 6
+
+#define UART_CLK_CFG (4 << DIV_SHIFT_UART \
+ | 1 << MDIV_SHIFT_UART | CLK_UART_MCLK)
+
+/* CGU Ethernet clock config */
+#define CLK_ETH_MCLK 0
+#define CLK_ETH_PLL1 1
+#define CLK_ETH_PLL2 2
+
+#define MDIV_SHIFT_ETH 3
+#define DIV_SHIFT_ETH 6
+#define DIV_ETH_125 9
+#define DIV_ETH_50 12
+#define DIV_ETH_P2P 15
+
+#define ETH_CLK_CFG (4 << DIV_ETH_P2P | 4 << DIV_ETH_50 \
+ | 1 << DIV_ETH_125 \
+ | 0 << DIV_SHIFT_ETH \
+ | 3 << MDIV_SHIFT_ETH | CLK_ETH_PLL1)
+ /* CGU Ethernet control */
+
+#define ETH_CLK_TX_EXT_PHY 0
+#define ETH_CLK_TX_125M 1
+#define ETH_CLK_TX_25M 2
+#define ETH_CLK_TX_2M5 3
+#define ETH_CLK_TX_DIS 7
+
+#define ETH_CLK_RX_EXT_PHY 0
+#define ETH_CLK_RX_25M 1
+#define ETH_CLK_RX_2M5 2
+#define ETH_CLK_RX_DIS 3
+#define RX_CLK_SHIFT 3
+#define ETH_CLK_MASK ~(0x1F)
+
+#define ETH_PHY_MODE_GMII 0
+#define ETH_PHY_MODE_RMII 1
+#define ETH_PHY_CLK_DIS 1
+
+#define ETH_CLK_CTRL (ETH_CLK_RX_EXT_PHY << RX_CLK_SHIFT \
+ | ETH_CLK_TX_EXT_PHY)
+#endif
diff --git a/arch/arm/include/asm/arch-stv0991/stv0991_creg.h b/arch/arm/include/asm/arch-stv0991/stv0991_creg.h
new file mode 100644
index 0000000..c804eb5
--- /dev/null
+++ b/arch/arm/include/asm/arch-stv0991/stv0991_creg.h
@@ -0,0 +1,95 @@
+/*
+ * (C) Copyright 2014
+ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _STV0991_CREG_H
+#define _STV0991_CREG_H
+
+struct stv0991_creg {
+ u32 version; /* offset 0x0 */
+ u32 hdpctl; /* offset 0x4 */
+ u32 hdpval; /* offset 0x8 */
+ u32 hdpgposet; /* offset 0xc */
+ u32 hdpgpoclr; /* offset 0x10 */
+ u32 hdpgpoval; /* offset 0x14 */
+ u32 stm_mux; /* offset 0x18 */
+ u32 sysctrl_1; /* offset 0x1c */
+ u32 sysctrl_2; /* offset 0x20 */
+ u32 sysctrl_3; /* offset 0x24 */
+ u32 sysctrl_4; /* offset 0x28 */
+ u32 reserved_1[0x35]; /* offset 0x2C-0xFC */
+ u32 mux1; /* offset 0x100 */
+ u32 mux2; /* offset 0x104 */
+ u32 mux3; /* offset 0x108 */
+ u32 mux4; /* offset 0x10c */
+ u32 mux5; /* offset 0x110 */
+ u32 mux6; /* offset 0x114 */
+ u32 mux7; /* offset 0x118 */
+ u32 mux8; /* offset 0x11c */
+ u32 mux9; /* offset 0x120 */
+ u32 mux10; /* offset 0x124 */
+ u32 mux11; /* offset 0x128 */
+ u32 mux12; /* offset 0x12c */
+ u32 mux13; /* offset 0x130 */
+ u32 reserved_2[0x33]; /* offset 0x134-0x1FC */
+ u32 cfg_pad1; /* offset 0x200 */
+ u32 cfg_pad2; /* offset 0x204 */
+ u32 cfg_pad3; /* offset 0x208 */
+ u32 cfg_pad4; /* offset 0x20c */
+ u32 cfg_pad5; /* offset 0x210 */
+ u32 cfg_pad6; /* offset 0x214 */
+ u32 cfg_pad7; /* offset 0x218 */
+ u32 reserved_3[0x39]; /* offset 0x21C-0x2FC */
+ u32 vdd_pad1; /* offset 0x300 */
+ u32 vdd_pad2; /* offset 0x304 */
+ u32 reserved_4[0x3e]; /* offset 0x308-0x3FC */
+ u32 vdd_comp1; /* offset 0x400 */
+};
+
+/* CREG MUX 12 register */
+#define GPIOC_30_MUX_SHIFT 24
+#define GPIOC_30_MUX_MASK ~(1 << GPIOC_30_MUX_SHIFT)
+#define CFG_GPIOC_30_UART_TX (1 << GPIOC_30_MUX_SHIFT)
+
+#define GPIOC_31_MUX_SHIFT 28
+#define GPIOC_31_MUX_MASK ~(1 << GPIOC_31_MUX_SHIFT)
+#define CFG_GPIOC_31_UART_RX (1 << GPIOC_31_MUX_SHIFT)
+
+/* CREG MUX 7 register */
+#define GPIOB_16_MUX_SHIFT 0
+#define GPIOB_16_MUX_MASK ~(1 << GPIOB_16_MUX_SHIFT)
+#define CFG_GPIOB_16_UART_TX (1 << GPIOB_16_MUX_SHIFT)
+
+#define GPIOB_17_MUX_SHIFT 4
+#define GPIOB_17_MUX_MASK ~(1 << GPIOB_17_MUX_SHIFT)
+#define CFG_GPIOB_17_UART_RX (1 << GPIOB_17_MUX_SHIFT)
+
+/* CREG CFG_PAD6 register */
+
+#define GPIOC_31_MODE_SHIFT 30
+#define GPIOC_31_MODE_MASK ~(1 << GPIOC_31_MODE_SHIFT)
+#define CFG_GPIOC_31_MODE_OD (0 << GPIOC_31_MODE_SHIFT)
+#define CFG_GPIOC_31_MODE_PP (1 << GPIOC_31_MODE_SHIFT)
+
+#define GPIOC_30_MODE_SHIFT 28
+#define GPIOC_30_MODE_MASK ~(1 << GPIOC_30_MODE_SHIFT)
+#define CFG_GPIOC_30_MODE_LOW (0 << GPIOC_30_MODE_SHIFT)
+#define CFG_GPIOC_30_MODE_HIGH (1 << GPIOC_30_MODE_SHIFT)
+
+/* CREG Ethernet pad config */
+
+#define VDD_ETH_PS_1V8 0
+#define VDD_ETH_PS_2V5 2
+#define VDD_ETH_PS_3V3 3
+#define VDD_ETH_PS_MASK 0x3
+
+#define VDD_ETH_PS_SHIFT 12
+#define ETH_VDD_CFG (VDD_ETH_PS_1V8 << VDD_ETH_PS_SHIFT)
+
+#define VDD_ETH_M_PS_SHIFT 28
+#define ETH_M_VDD_CFG (VDD_ETH_PS_1V8 << VDD_ETH_M_PS_SHIFT)
+
+#endif
diff --git a/arch/arm/include/asm/arch-stv0991/stv0991_defs.h b/arch/arm/include/asm/arch-stv0991/stv0991_defs.h
new file mode 100644
index 0000000..1151378
--- /dev/null
+++ b/arch/arm/include/asm/arch-stv0991/stv0991_defs.h
@@ -0,0 +1,16 @@
+/*
+ * (C) Copyright 2014
+ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __STV0991_DEFS_H__
+#define __STV0991_DEFS_H__
+#include <asm/arch/stv0991_periph.h>
+
+extern int stv0991_pinmux_config(enum periph_id);
+extern int clock_setup(enum periph_clock);
+
+#endif
+
diff --git a/arch/arm/include/asm/arch-stv0991/stv0991_gpt.h b/arch/arm/include/asm/arch-stv0991/stv0991_gpt.h
new file mode 100644
index 0000000..abd7257
--- /dev/null
+++ b/arch/arm/include/asm/arch-stv0991/stv0991_gpt.h
@@ -0,0 +1,43 @@
+/*
+ * (C) Copyright 2014
+ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _STV0991_GPT_H
+#define _STV0991_GPT_H
+
+#include <asm/arch-stv0991/hardware.h>
+
+struct gpt_regs {
+ u32 cr1;
+ u32 cr2;
+ u32 reserved_1;
+ u32 dier; /* dma_int_en */
+ u32 sr; /* status reg */
+ u32 egr; /* event gen */
+ u32 reserved_2[3]; /* offset 0x18--0x20*/
+ u32 cnt;
+ u32 psc;
+ u32 arr;
+};
+
+struct gpt_regs *const gpt1_regs_ptr =
+ (struct gpt_regs *) GPTIMER1_BASE_ADDR;
+
+/* Timer control1 register */
+#define GPT_CR1_CEN 0x0001
+#define GPT_MODE_AUTO_RELOAD (1 << 7)
+
+/* Timer prescalar reg */
+#define GPT_PRESCALER_128 0x128
+
+/* Auto reload register for free running config */
+#define GPT_FREE_RUNNING 0xFFFF
+
+/* Timer, HZ specific defines */
+#define CONFIG_STV0991_HZ 1000
+#define CONFIG_STV0991_HZ_CLOCK (27*1000*1000)/GPT_PRESCALER_128
+
+#endif
diff --git a/arch/arm/include/asm/arch-stv0991/stv0991_periph.h b/arch/arm/include/asm/arch-stv0991/stv0991_periph.h
new file mode 100644
index 0000000..f728c83
--- /dev/null
+++ b/arch/arm/include/asm/arch-stv0991/stv0991_periph.h
@@ -0,0 +1,44 @@
+/*
+ * (C) Copyright 2014
+ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ASM_ARM_ARCH_PERIPH_H
+#define __ASM_ARM_ARCH_PERIPH_H
+
+/*
+ * Peripherals required for pinmux configuration. List will
+ * grow with support for more devices getting added.
+ * Numbering based on interrupt table.
+ *
+ */
+enum periph_id {
+ UART_GPIOC_30_31 = 0,
+ UART_GPIOB_16_17,
+ ETH_GPIOB_10_31_C_0_4,
+ PERIPH_ID_I2C0,
+ PERIPH_ID_I2C1,
+ PERIPH_ID_I2C2,
+ PERIPH_ID_I2C3,
+ PERIPH_ID_I2C4,
+ PERIPH_ID_I2C5,
+ PERIPH_ID_I2C6,
+ PERIPH_ID_I2C7,
+ PERIPH_ID_SPI0,
+ PERIPH_ID_SPI1,
+ PERIPH_ID_SPI2,
+ PERIPH_ID_SDMMC0,
+ PERIPH_ID_SDMMC1,
+ PERIPH_ID_SDMMC2,
+ PERIPH_ID_SDMMC3,
+ PERIPH_ID_I2S1,
+};
+
+enum periph_clock {
+ UART_CLOCK_CFG = 0,
+ ETH_CLOCK_CFG,
+};
+
+#endif /* __ASM_ARM_ARCH_PERIPH_H */
diff --git a/arch/arm/include/asm/arch-stv0991/stv0991_wdru.h b/arch/arm/include/asm/arch-stv0991/stv0991_wdru.h
new file mode 100644
index 0000000..7e555a2
--- /dev/null
+++ b/arch/arm/include/asm/arch-stv0991/stv0991_wdru.h
@@ -0,0 +1,28 @@
+/*
+ * (C) Copyright 2014
+ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _STV0991_WD_RST_H
+#define _STV0991_WD_RST_H
+#include <asm/arch-stv0991/hardware.h>
+
+struct stv0991_wd_ru {
+ u32 wdru_config;
+ u32 wdru_ctrl1;
+ u32 wdru_ctrl2;
+ u32 wdru_tim;
+ u32 wdru_count;
+ u32 wdru_stat;
+ u32 wdru_wrlock;
+};
+
+struct stv0991_wd_ru *const stv0991_wd_ru_ptr = \
+ (struct stv0991_wd_ru *)WDRU_BASE_ADDR;
+
+/* Watchdog control register */
+#define WDRU_RST_SYS 0x1
+
+#endif
diff --git a/arch/arm/include/asm/arch-tegra/tegra_i2c.h b/arch/arm/include/asm/arch-tegra/tegra_i2c.h
index 7ca6907..eeeb247 100644
--- a/arch/arm/include/asm/arch-tegra/tegra_i2c.h
+++ b/arch/arm/include/asm/arch-tegra/tegra_i2c.h
@@ -167,6 +167,6 @@ struct i2c_ctlr {
*
* @return number of bus, or -1 if there is no DVC active
*/
-int tegra_i2c_get_dvc_bus_num(void);
+int tegra_i2c_get_dvc_bus(struct udevice **busp);
#endif /* _TEGRA_I2C_H_ */
diff --git a/arch/arm/include/asm/arch-uniphier/board.h b/arch/arm/include/asm/arch-uniphier/board.h
index e6ba4e4..e3cba5b 100644
--- a/arch/arm/include/asm/arch-uniphier/board.h
+++ b/arch/arm/include/asm/arch-uniphier/board.h
@@ -12,10 +12,12 @@
defined(CONFIG_DCC_MICRO_SUPPORT_CARD)
void support_card_reset(void);
void support_card_init(void);
+void support_card_late_init(void);
int check_support_card(void);
#else
#define support_card_reset() do {} while (0)
#define support_card_init() do {} while (0)
+#define support_card_late_init() do {} while (0)
static inline int check_support_card(void)
{
return 0;
@@ -32,4 +34,9 @@ static inline void uniphier_board_init(void)
support_card_init();
}
+static inline void uniphier_board_late_init(void)
+{
+ support_card_late_init();
+}
+
#endif /* ARCH_BOARD_H */
diff --git a/arch/arm/include/asm/arch-vf610/imx-regs.h b/arch/arm/include/asm/arch-vf610/imx-regs.h
index 9d797db..6b10bdf 100644
--- a/arch/arm/include/asm/arch-vf610/imx-regs.h
+++ b/arch/arm/include/asm/arch-vf610/imx-regs.h
@@ -256,6 +256,14 @@
#define DDRMC_CR161_TODTH_RD(v) (((v) & 0xf) << 8)
#define DDRMC_CR161_TODTH_WR(v) ((v) & 0xf)
+/* System Reset Controller (SRC) */
+#define SRC_SRSR_SW_RST (0x1 << 18)
+#define SRC_SRSR_RESETB (0x1 << 7)
+#define SRC_SRSR_JTAG_RST (0x1 << 5)
+#define SRC_SRSR_WDOG_M4 (0x1 << 4)
+#define SRC_SRSR_WDOG_A5 (0x1 << 3)
+#define SRC_SRSR_POR_RST (0x1 << 0)
+
#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
#include <asm/types.h>
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index 1838234..323952f 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -540,6 +540,7 @@ extern struct prcm_regs const omap5_es2_prcm;
extern struct prcm_regs const omap4_prcm;
extern struct prcm_regs const dra7xx_prcm;
extern struct dplls const **dplls_data;
+extern struct dplls dra7xx_dplls;
extern struct vcores_data const **omap_vcores;
extern const u32 sys_clk_array[8];
extern struct omap_sys_ctrl_regs const **ctrl;
@@ -547,6 +548,8 @@ extern struct omap_sys_ctrl_regs const omap4_ctrl;
extern struct omap_sys_ctrl_regs const omap5_ctrl;
extern struct omap_sys_ctrl_regs const dra7xx_ctrl;
+extern struct pmic_data tps659038;
+
void hw_data_init(void);
const struct dpll_params *get_mpu_dpll_params(struct dplls const *);
diff --git a/arch/arm/include/asm/pcie_layerscape.h b/arch/arm/include/asm/pcie_layerscape.h
new file mode 100644
index 0000000..fb08578
--- /dev/null
+++ b/arch/arm/include/asm/pcie_layerscape.h
@@ -0,0 +1,13 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __PCIE_LAYERSCAPE_H_
+#define __PCIE_LAYERSCAPE_H_
+
+void pci_init_board(void);
+void ft_pcie_setup(void *blob, bd_t *bd);
+
+#endif
diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile
new file mode 100644
index 0000000..e9b3184
--- /dev/null
+++ b/arch/avr32/Makefile
@@ -0,0 +1,8 @@
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+head-y := arch/avr32/cpu/start.o
+
+libs-y += arch/avr32/cpu/
+libs-y += arch/avr32/lib/
diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile
new file mode 100644
index 0000000..787475e
--- /dev/null
+++ b/arch/blackfin/Makefile
@@ -0,0 +1,8 @@
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+head-y := arch/blackfin/cpu/start.o
+
+libs-y += arch/blackfin/cpu/
+libs-y += arch/blackfin/lib/
diff --git a/arch/blackfin/include/asm/io.h b/arch/blackfin/include/asm/io.h
index 69f08bc..aadb0d2 100644
--- a/arch/blackfin/include/asm/io.h
+++ b/arch/blackfin/include/asm/io.h
@@ -11,10 +11,9 @@
#ifdef __KERNEL__
+#include <linux/compiler.h>
#include <asm/blackfin.h>
-#define __iomem
-
static inline void sync(void)
{
SSYNC();
diff --git a/arch/m68k/Makefile b/arch/m68k/Makefile
new file mode 100644
index 0000000..aa3d2fa
--- /dev/null
+++ b/arch/m68k/Makefile
@@ -0,0 +1,8 @@
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+head-y := arch/m68k/cpu/$(CPU)/start.o
+
+libs-y += arch/m68k/cpu/$(CPU)/
+libs-y += arch/m68k/lib/
diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
new file mode 100644
index 0000000..ae4adc2
--- /dev/null
+++ b/arch/microblaze/Makefile
@@ -0,0 +1,8 @@
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+head-y := arch/microblaze/cpu/start.o
+
+libs-y += arch/microblaze/cpu/
+libs-y += arch/microblaze/lib/
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
new file mode 100644
index 0000000..1907b57
--- /dev/null
+++ b/arch/mips/Makefile
@@ -0,0 +1,8 @@
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+head-y := arch/mips/cpu/$(CPU)/start.o
+
+libs-y += arch/mips/cpu/$(CPU)/
+libs-y += arch/mips/lib/
diff --git a/arch/mips/include/asm/unaligned.h b/arch/mips/include/asm/unaligned.h
index 1d5112e..c25a846 100644
--- a/arch/mips/include/asm/unaligned.h
+++ b/arch/mips/include/asm/unaligned.h
@@ -8,7 +8,7 @@
#ifndef _ASM_MIPS_UNALIGNED_H
#define _ASM_MIPS_UNALIGNED_H
-#include <compiler.h>
+#include <linux/compiler.h>
#if defined(__MIPSEB__)
#define get_unaligned __get_unaligned_be
#define put_unaligned __put_unaligned_be
diff --git a/arch/nds32/Makefile b/arch/nds32/Makefile
new file mode 100644
index 0000000..e1eccba
--- /dev/null
+++ b/arch/nds32/Makefile
@@ -0,0 +1,8 @@
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+head-y := arch/nds32/cpu/$(CPU)/start.o
+
+libs-y += arch/nds32/cpu/$(CPU)/
+libs-y += arch/nds32/lib/
diff --git a/arch/nios2/Makefile b/arch/nios2/Makefile
new file mode 100644
index 0000000..18685a9
--- /dev/null
+++ b/arch/nios2/Makefile
@@ -0,0 +1,8 @@
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+head-y := arch/nios2/cpu/start.o
+
+libs-y += arch/nios2/cpu/
+libs-y += arch/nios2/lib/
diff --git a/arch/openrisc/Makefile b/arch/openrisc/Makefile
new file mode 100644
index 0000000..c4da3ce
--- /dev/null
+++ b/arch/openrisc/Makefile
@@ -0,0 +1,8 @@
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+head-y := arch/openrisc/cpu/start.o
+
+libs-y += arch/openrisc/cpu/
+libs-y += arch/openrisc/lib/
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
new file mode 100644
index 0000000..8aa1d60
--- /dev/null
+++ b/arch/powerpc/Makefile
@@ -0,0 +1,11 @@
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+head-y := arch/powerpc/cpu/$(CPU)/start.o
+head-$(CONFIG_4xx) += arch/powerpc/cpu/ppc4xx/resetvec.o
+head-$(CONFIG_MPC85xx) += arch/powerpc/cpu/mpc85xx/resetvec.o
+
+libs-y += arch/powerpc/cpu/$(CPU)/
+libs-y += arch/powerpc/cpu/
+libs-y += arch/powerpc/lib/
diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index 7b42d06..7501eb4 100644
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -110,6 +110,14 @@ config TARGET_P2041RDB
config TARGET_QEMU_PPCE500
bool "Support qemu-ppce500"
+config TARGET_T102XQDS
+ bool "Support T102xQDS"
+ select SUPPORT_SPL
+
+config TARGET_T102XRDB
+ bool "Support T102xRDB"
+ select SUPPORT_SPL
+
config TARGET_T1040QDS
bool "Support T1040QDS"
@@ -183,6 +191,8 @@ source "board/freescale/p2020come/Kconfig"
source "board/freescale/p2020ds/Kconfig"
source "board/freescale/p2041rdb/Kconfig"
source "board/freescale/qemu-ppce500/Kconfig"
+source "board/freescale/t102xqds/Kconfig"
+source "board/freescale/t102xrdb/Kconfig"
source "board/freescale/t1040qds/Kconfig"
source "board/freescale/t104xrdb/Kconfig"
source "board/freescale/t208xqds/Kconfig"
diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile
index ad26b43..b93158b 100644
--- a/arch/powerpc/cpu/mpc85xx/Makefile
+++ b/arch/powerpc/cpu/mpc85xx/Makefile
@@ -51,6 +51,8 @@ obj-$(CONFIG_PPC_T1040) += t1040_ids.o
obj-$(CONFIG_PPC_T1042) += t1040_ids.o
obj-$(CONFIG_PPC_T1020) += t1040_ids.o
obj-$(CONFIG_PPC_T1022) += t1040_ids.o
+obj-$(CONFIG_PPC_T1023) += t1024_ids.o
+obj-$(CONFIG_PPC_T1024) += t1024_ids.o
obj-$(CONFIG_PPC_T2080) += t2080_ids.o
obj-$(CONFIG_PPC_T2081) += t2080_ids.o
@@ -97,6 +99,8 @@ obj-$(CONFIG_PPC_T1040) += t1040_serdes.o
obj-$(CONFIG_PPC_T1042) += t1040_serdes.o
obj-$(CONFIG_PPC_T1020) += t1040_serdes.o
obj-$(CONFIG_PPC_T1022) += t1040_serdes.o
+obj-$(CONFIG_PPC_T1023) += t1024_serdes.o
+obj-$(CONFIG_PPC_T1024) += t1024_serdes.o
obj-$(CONFIG_PPC_T2080) += t2080_serdes.o
obj-$(CONFIG_PPC_T2081) += t2080_serdes.o
diff --git a/arch/powerpc/cpu/mpc85xx/b4860_ids.c b/arch/powerpc/cpu/mpc85xx/b4860_ids.c
index 1a30f1c..598f7bd 100644
--- a/arch/powerpc/cpu/mpc85xx/b4860_ids.c
+++ b/arch/powerpc/cpu/mpc85xx/b4860_ids.c
@@ -59,8 +59,8 @@ struct liodn_id_table liodn_tbl[] = {
SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 148),
- SET_DMA_LIODN(1, 147),
- SET_DMA_LIODN(2, 227),
+ SET_DMA_LIODN(1, "fsl,elo3-dma", 147),
+ SET_DMA_LIODN(2, "fsl,elo3-dma", 227),
#ifndef CONFIG_PPC_B4420
SET_GUTS_LIODN("fsl,rapidio-delta", 199, rio1liodnr, 0),
diff --git a/arch/powerpc/cpu/mpc85xx/b4860_serdes.c b/arch/powerpc/cpu/mpc85xx/b4860_serdes.c
index cf18be5..63172de 100644
--- a/arch/powerpc/cpu/mpc85xx/b4860_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/b4860_serdes.c
@@ -18,6 +18,8 @@ struct serdes_config {
#ifdef CONFIG_PPC_B4860
static struct serdes_config serdes1_cfg_tbl[] = {
/* SerDes 1 */
+ {0x01, {AURORA, AURORA, CPRI6, CPRI5,
+ CPRI4, CPRI3, CPRI2, CPRI1} },
{0x02, {AURORA, AURORA, CPRI6, CPRI5,
CPRI4, CPRI3, CPRI2, CPRI1} },
{0x04, {AURORA, AURORA, CPRI6, CPRI5,
@@ -26,6 +28,8 @@ static struct serdes_config serdes1_cfg_tbl[] = {
CPRI4, CPRI3, CPRI2, CPRI1} },
{0x06, {AURORA, AURORA, CPRI6, CPRI5,
CPRI4, CPRI3, CPRI2, CPRI1} },
+ {0x07, {AURORA, AURORA, CPRI6, CPRI5,
+ CPRI4, CPRI3, CPRI2, CPRI1} },
{0x08, {AURORA, AURORA, CPRI6, CPRI5,
CPRI4, CPRI3, CPRI2, CPRI1} },
{0x09, {AURORA, AURORA, CPRI6, CPRI5,
@@ -184,12 +188,17 @@ static struct serdes_config serdes1_cfg_tbl[] = {
CPRI4, CPRI3, NONE, NONE} },
{0x0F, {NONE, NONE, CPRI6, CPRI5,
CPRI4, CPRI3, NONE, NONE} },
+ {0x17, {NONE, NONE,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ NONE, NONE, NONE, NONE} },
{0x18, {NONE, NONE,
SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
NONE, NONE, NONE, NONE} },
{0x1B, {NONE, NONE,
SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
NONE, NONE, NONE, NONE} },
+ {0x1D, {NONE, NONE, AURORA, AURORA,
+ NONE, NONE, NONE, NONE} },
{0x1E, {NONE, NONE, AURORA, AURORA,
NONE, NONE, NONE, NONE} },
{0x21, {NONE, NONE, AURORA, AURORA,
@@ -199,19 +208,29 @@ static struct serdes_config serdes1_cfg_tbl[] = {
{}
};
static struct serdes_config serdes2_cfg_tbl[] = {
+ {0x48, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, AURORA,
+ NONE, NONE, NONE, NONE} },
{0x49, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
SGMII_FM1_DTSEC3, AURORA,
NONE, NONE, NONE, NONE} },
{0x4A, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
SGMII_FM1_DTSEC3, AURORA,
NONE, NONE, NONE, NONE} },
+ {0x6E, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ AURORA, AURORA, NONE, NONE, NONE, NONE} },
{0x6F, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
AURORA, AURORA, NONE, NONE, NONE, NONE} },
{0x70, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
AURORA, AURORA, NONE, NONE, NONE, NONE} },
+ {0x99, {PCIE1, PCIE1,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ NONE, NONE, NONE, NONE} },
{0x9A, {PCIE1, PCIE1,
SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
NONE, NONE, NONE, NONE} },
+ {0x9D, {PCIE1, PCIE1, PCIE1, PCIE1,
+ NONE, NONE, NONE, NONE} },
{0x9E, {PCIE1, PCIE1, PCIE1, PCIE1,
NONE, NONE, NONE, NONE} },
{}
diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
index fe3eb06..2d5ddf0 100644
--- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c
+++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
@@ -271,7 +271,8 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
puts("Work-around for Erratum USB14 enabled\n");
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_A007186
- puts("Work-around for Erratum A007186 enabled\n");
+ if (has_erratum_a007186())
+ puts("Work-around for Erratum A007186 enabled\n");
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_A006593
puts("Work-around for Erratum A006593 enabled\n");
@@ -313,6 +314,14 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
#ifdef CONFIG_SYS_FSL_ERRATUM_A005434
puts("Work-around for Erratum A-005434 enabled\n");
#endif
+#if defined(CONFIG_SYS_FSL_ERRATUM_A008044) && \
+ defined(CONFIG_A008044_WORKAROUND)
+ if (IS_SVR_REV(svr, 1, 0))
+ puts("Work-around for Erratum A-008044 enabled\n");
+#endif
+#if defined(CONFIG_SYS_FSL_B4860QDS_XFI_ERR) && defined(CONFIG_B4860QDS)
+ puts("Work-around for Erratum XFI on B4860QDS enabled\n");
+#endif
return 0;
}
diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c
index 8edf5bb..5cfae47 100644
--- a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c
@@ -11,6 +11,7 @@
#include <asm/processor.h>
#include <asm/fsl_law.h>
#include <asm/errno.h>
+#include <asm/fsl_errata.h>
#include "fsl_corenet2_serdes.h"
#ifdef CONFIG_SYS_FSL_SRDS_1
@@ -203,7 +204,7 @@ u64 serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift)
sel = (sfp_spfr0 >> FUSE_VAL_SHIFT) & FUSE_VAL_MASK;
- if (sel == 0x01 || sel == 0x02) {
+ if (has_erratum_a007186() && (sel == 0x01 || sel == 0x02)) {
for (pll_num = 0; pll_num < SRDS_MAX_BANK; pll_num++) {
pll_status = in_be32(&srds_regs->bank[pll_num].pllcr0);
debug("A007186: pll_num=%x pllcr0=%x\n",
diff --git a/arch/powerpc/cpu/mpc85xx/p2041_ids.c b/arch/powerpc/cpu/mpc85xx/p2041_ids.c
index 488e078..6e3cddd 100644
--- a/arch/powerpc/cpu/mpc85xx/p2041_ids.c
+++ b/arch/powerpc/cpu/mpc85xx/p2041_ids.c
@@ -50,8 +50,8 @@ struct liodn_id_table liodn_tbl[] = {
SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 2, 194),
SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 3, 195),
- SET_DMA_LIODN(1, 197),
- SET_DMA_LIODN(2, 198),
+ SET_DMA_LIODN(1, "fsl,eloplus-dma", 197),
+ SET_DMA_LIODN(2, "fsl,eloplus-dma", 198),
SET_GUTS_LIODN("fsl,rapidio-delta", 199, rio1liodnr, 0),
SET_GUTS_LIODN(NULL, 200, rio2liodnr, 0),
diff --git a/arch/powerpc/cpu/mpc85xx/p3041_ids.c b/arch/powerpc/cpu/mpc85xx/p3041_ids.c
index 7d98870..2b57703 100644
--- a/arch/powerpc/cpu/mpc85xx/p3041_ids.c
+++ b/arch/powerpc/cpu/mpc85xx/p3041_ids.c
@@ -51,8 +51,8 @@ struct liodn_id_table liodn_tbl[] = {
SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 3, 195),
SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 4, 196),
- SET_DMA_LIODN(1, 197),
- SET_DMA_LIODN(2, 198),
+ SET_DMA_LIODN(1, "fsl,eloplus-dma", 197),
+ SET_DMA_LIODN(2, "fsl,eloplus-dma", 198),
SET_GUTS_LIODN("fsl,rapidio-delta", 199, rio1liodnr, 0),
SET_GUTS_LIODN(NULL, 200, rio2liodnr, 0),
diff --git a/arch/powerpc/cpu/mpc85xx/p4080_ids.c b/arch/powerpc/cpu/mpc85xx/p4080_ids.c
index b2a23c0..94a5143 100644
--- a/arch/powerpc/cpu/mpc85xx/p4080_ids.c
+++ b/arch/powerpc/cpu/mpc85xx/p4080_ids.c
@@ -40,8 +40,8 @@ struct liodn_id_table liodn_tbl[] = {
SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 2, 194),
SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 3, 195),
- SET_DMA_LIODN(1, 196),
- SET_DMA_LIODN(2, 197),
+ SET_DMA_LIODN(1, "fsl,eloplus-dma", 196),
+ SET_DMA_LIODN(2, "fsl,eloplus-dma", 197),
SET_GUTS_LIODN("fsl,srio-rmu", 200, rmuliodnr, 0xd3000),
diff --git a/arch/powerpc/cpu/mpc85xx/p5020_ids.c b/arch/powerpc/cpu/mpc85xx/p5020_ids.c
index b5d787c..0f292cf 100644
--- a/arch/powerpc/cpu/mpc85xx/p5020_ids.c
+++ b/arch/powerpc/cpu/mpc85xx/p5020_ids.c
@@ -51,8 +51,8 @@ struct liodn_id_table liodn_tbl[] = {
SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 3, 195),
SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 4, 196),
- SET_DMA_LIODN(1, 197),
- SET_DMA_LIODN(2, 198),
+ SET_DMA_LIODN(1, "fsl,eloplus-dma", 197),
+ SET_DMA_LIODN(2, "fsl,eloplus-dma", 198),
SET_GUTS_LIODN("fsl,rapidio-delta", 199, rio1liodnr, 0),
SET_GUTS_LIODN(NULL, 200, rio2liodnr, 0),
diff --git a/arch/powerpc/cpu/mpc85xx/p5040_ids.c b/arch/powerpc/cpu/mpc85xx/p5040_ids.c
index 990f179..d4343ef 100644
--- a/arch/powerpc/cpu/mpc85xx/p5040_ids.c
+++ b/arch/powerpc/cpu/mpc85xx/p5040_ids.c
@@ -42,8 +42,8 @@ struct liodn_id_table liodn_tbl[] = {
SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 2, 196),
SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 3, 197),
- SET_DMA_LIODN(1, 193),
- SET_DMA_LIODN(2, 194),
+ SET_DMA_LIODN(1, "fsl,eloplus-dma", 193),
+ SET_DMA_LIODN(2, "fsl,eloplus-dma", 194),
};
int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl);
diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index 8426b1a..7e69873 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -37,6 +37,7 @@ void get_sys_info(sys_info_t *sys_info)
#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
int cc_group[12] = CONFIG_SYS_FSL_CLUSTER_CLOCKS;
#endif
+ __maybe_unused u32 svr;
const u8 core_cplx_PLL[16] = {
[ 0] = 0, /* CC1 PPL / 1 */
@@ -122,11 +123,27 @@ void get_sys_info(sys_info_t *sys_info)
/* T4240/T4160 Rev2.0 MEM_PLL_RAT uses a value which is half of
* T4240/T4160 Rev1.0. eg. It's 12 in Rev1.0, however, for Rev2.0
* it uses 6.
+ * T2080 rev 1.1 and later also use half mem_pll comparing with rev 1.0
*/
#if defined(CONFIG_PPC_T4240) || defined(CONFIG_PPC_T4160) || \
- defined(CONFIG_PPC_T4080)
- if (SVR_MAJ(get_svr()) >= 2)
- mem_pll_rat *= 2;
+ defined(CONFIG_PPC_T4080) || defined(CONFIG_PPC_T2080)
+ svr = get_svr();
+ switch (SVR_SOC_VER(svr)) {
+ case SVR_T4240:
+ case SVR_T4160:
+ case SVR_T4120:
+ case SVR_T4080:
+ if (SVR_MAJ(svr) >= 2)
+ mem_pll_rat *= 2;
+ break;
+ case SVR_T2080:
+ case SVR_T2081:
+ if ((SVR_MAJ(svr) > 1) || (SVR_MIN(svr) >= 1))
+ mem_pll_rat *= 2;
+ break;
+ default:
+ break;
+ }
#endif
if (mem_pll_rat > 2)
sys_info->freq_ddrbus *= mem_pll_rat;
@@ -168,6 +185,9 @@ void get_sys_info(sys_info_t *sys_info)
defined(CONFIG_PPC_T2080) || defined(CONFIG_PPC_T2081)
#define FM1_CLK_SEL 0xe0000000
#define FM1_CLK_SHIFT 29
+#elif defined(CONFIG_PPC_T1024) || defined(CONFIG_PPC_T1023)
+#define FM1_CLK_SEL 0x00000007
+#define FM1_CLK_SHIFT 0
#else
#define PME_CLK_SEL 0xe0000000
#define PME_CLK_SHIFT 29
@@ -175,8 +195,12 @@ void get_sys_info(sys_info_t *sys_info)
#define FM1_CLK_SHIFT 26
#endif
#if !defined(CONFIG_FM_PLAT_CLK_DIV) || !defined(CONFIG_PME_PLAT_CLK_DIV)
+#if defined(CONFIG_PPC_T1024) || defined(CONFIG_PPC_T1023)
+ rcw_tmp = in_be32(&gur->rcwsr[15]) - 4;
+#else
rcw_tmp = in_be32(&gur->rcwsr[7]);
#endif
+#endif
#ifdef CONFIG_SYS_DPAA_PME
#ifndef CONFIG_PME_PLAT_CLK_DIV
@@ -213,7 +237,10 @@ void get_sys_info(sys_info_t *sys_info)
#endif
#ifdef CONFIG_SYS_DPAA_QBMAN
- sys_info->freq_qman = sys_info->freq_systembus / 2;
+#ifndef CONFIG_QBMAN_CLK_DIV
+#define CONFIG_QBMAN_CLK_DIV 2
+#endif
+ sys_info->freq_qman = sys_info->freq_systembus / CONFIG_QBMAN_CLK_DIV;
#endif
#ifdef CONFIG_SYS_DPAA_FMAN
diff --git a/arch/powerpc/cpu/mpc85xx/t1024_ids.c b/arch/powerpc/cpu/mpc85xx/t1024_ids.c
new file mode 100644
index 0000000..132689b
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/t1024_ids.c
@@ -0,0 +1,82 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+
+#ifdef CONFIG_SYS_DPAA_QBMAN
+struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = {
+ /* dqrr liodn, frame data liodn, liodn off, sdest */
+ SET_QP_INFO(1, 27, 1, 0),
+ SET_QP_INFO(2, 28, 1, 0),
+ SET_QP_INFO(3, 29, 1, 1),
+ SET_QP_INFO(4, 30, 1, 1),
+ SET_QP_INFO(5, 31, 1, 2),
+ SET_QP_INFO(6, 32, 1, 2),
+ SET_QP_INFO(7, 33, 1, 3),
+ SET_QP_INFO(8, 34, 1, 3),
+ SET_QP_INFO(9, 35, 1, 0),
+ SET_QP_INFO(10, 36, 1, 0),
+};
+#endif
+
+struct liodn_id_table liodn_tbl[] = {
+#ifdef CONFIG_SYS_DPAA_QBMAN
+ SET_QMAN_LIODN(62),
+ SET_BMAN_LIODN(63),
+#endif
+
+ SET_SDHC_LIODN(1, 552),
+
+ SET_USB_LIODN(1, "fsl-usb2-mph", 553),
+ SET_USB_LIODN(2, "fsl-usb2-dr", 554),
+
+ SET_SATA_LIODN(1, 555),
+
+ SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 148),
+ SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 2, 228),
+ SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 3, 308),
+
+ SET_DMA_LIODN(1, "fsl,elo3-dma", 147),
+ SET_DMA_LIODN(2, "fsl,elo3-dma", 227),
+ /* SET_NEXUS_LIODN(557), -- not yet implemented */
+ SET_QE_LIODN(559),
+ SET_TDM_LIODN(560),
+};
+int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl);
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+struct liodn_id_table fman1_liodn_tbl[] = {
+ SET_FMAN_RX_1G_LIODN(1, 0, 88),
+ SET_FMAN_RX_1G_LIODN(1, 1, 89),
+ SET_FMAN_RX_1G_LIODN(1, 2, 90),
+ SET_FMAN_RX_1G_LIODN(1, 3, 91),
+ SET_FMAN_RX_10G_LIODN(1, 0, 94),
+};
+int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl);
+#endif
+
+struct liodn_id_table sec_liodn_tbl[] = {
+ SET_SEC_JR_LIODN_ENTRY(0, 454, 458),
+ SET_SEC_JR_LIODN_ENTRY(1, 455, 459),
+ SET_SEC_JR_LIODN_ENTRY(2, 456, 460),
+ SET_SEC_JR_LIODN_ENTRY(3, 457, 461),
+ SET_SEC_RTIC_LIODN_ENTRY(a, 453),
+ SET_SEC_RTIC_LIODN_ENTRY(b, 549),
+ SET_SEC_RTIC_LIODN_ENTRY(c, 550),
+ SET_SEC_RTIC_LIODN_ENTRY(d, 551),
+ SET_SEC_DECO_LIODN_ENTRY(0, 541, 610),
+ SET_SEC_DECO_LIODN_ENTRY(1, 542, 611),
+};
+int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl);
+
+struct liodn_id_table liodn_bases[] = {
+ [FSL_HW_PORTAL_SEC] = SET_LIODN_BASE_2(462, 558),
+#ifdef CONFIG_SYS_DPAA_FMAN
+ [FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(973),
+#endif
+};
diff --git a/arch/powerpc/cpu/mpc85xx/t1024_serdes.c b/arch/powerpc/cpu/mpc85xx/t1024_serdes.c
new file mode 100644
index 0000000..7dc8385
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/t1024_serdes.c
@@ -0,0 +1,52 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/fsl_serdes.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+
+
+static u8 serdes_cfg_tbl[][4] = {
+ [0xD5] = {QSGMII_FM1_A, PCIE3, PCIE2, PCIE1},
+ [0xD6] = {QSGMII_FM1_A, PCIE3, PCIE2, SATA1},
+ [0x95] = {XFI_FM1_MAC1, PCIE3, PCIE2, PCIE1},
+ [0x99] = {XFI_FM1_MAC1, PCIE3, SGMII_FM1_DTSEC2, PCIE1},
+ [0x46] = {PCIE1, PCIE1, PCIE2, SATA1},
+ [0x47] = {PCIE1, PCIE1, PCIE2, SGMII_FM1_DTSEC1},
+ [0x56] = {PCIE1, PCIE3, PCIE2, SATA1},
+ [0x5A] = {PCIE1, PCIE3, SGMII_FM1_DTSEC2, SATA1},
+ [0x5B] = {PCIE1, PCIE3, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC1},
+ [0x6A] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC2, SATA1},
+ [0x6B] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC1},
+ [0x6F] = {PCIE1, SGMII_FM1_DTSEC3, SGMII_2500_FM1_DTSEC2,
+ SGMII_2500_FM1_DTSEC1},
+ [0x77] = {PCIE1, SGMII_2500_FM1_DTSEC3, PCIE2, SGMII_FM1_DTSEC1},
+ [0x7F] = {PCIE1, SGMII_2500_FM1_DTSEC3, SGMII_2500_FM1_DTSEC2,
+ SGMII_2500_FM1_DTSEC1},
+ [0x119] = {AURORA, PCIE3, SGMII_FM1_DTSEC2, PCIE1},
+ [0x135] = {AURORA, SGMII_2500_FM1_DTSEC3, PCIE2, PCIE1},
+};
+
+enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane)
+{
+ return serdes_cfg_tbl[cfg][lane];
+}
+
+int is_serdes_prtcl_valid(int serdes, u32 prtcl)
+{
+ int i;
+
+ if (prtcl >= ARRAY_SIZE(serdes_cfg_tbl))
+ return 0;
+
+ for (i = 0; i < 4; i++) {
+ if (serdes_cfg_tbl[prtcl][i] != NONE)
+ return 1;
+ }
+
+ return 0;
+}
diff --git a/arch/powerpc/cpu/mpc85xx/t1040_ids.c b/arch/powerpc/cpu/mpc85xx/t1040_ids.c
index a5dfb81..8091722 100644
--- a/arch/powerpc/cpu/mpc85xx/t1040_ids.c
+++ b/arch/powerpc/cpu/mpc85xx/t1040_ids.c
@@ -24,12 +24,6 @@ struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = {
};
#endif
-struct srio_liodn_id_table srio_liodn_tbl[] = {
- SET_SRIO_LIODN_1(1, 307),
- SET_SRIO_LIODN_1(2, 387),
-};
-int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl);
-
struct liodn_id_table liodn_tbl[] = {
#ifdef CONFIG_SYS_DPAA_QBMAN
SET_QMAN_LIODN(62),
@@ -38,12 +32,21 @@ struct liodn_id_table liodn_tbl[] = {
SET_SDHC_LIODN(1, 552),
+ SET_PME_LIODN(117),
+
SET_USB_LIODN(1, "fsl-usb2-mph", 553),
+ SET_USB_LIODN(2, "fsl-usb2-dr", 554),
- SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 1, 148),
+ SET_SATA_LIODN(1, 555),
+ SET_SATA_LIODN(2, 556),
- SET_DMA_LIODN(1, 147),
- SET_DMA_LIODN(2, 227),
+ SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 148),
+ SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 2, 228),
+ SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 3, 308),
+ SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 4, 388),
+
+ SET_DMA_LIODN(1, "fsl,elo3-dma", 147),
+ SET_DMA_LIODN(2, "fsl,elo3-dma", 227),
/* SET_NEXUS_LIODN(557), -- not yet implemented */
SET_QE_LIODN(559),
@@ -74,6 +77,12 @@ struct liodn_id_table sec_liodn_tbl[] = {
SET_SEC_RTIC_LIODN_ENTRY(d, 551),
SET_SEC_DECO_LIODN_ENTRY(0, 541, 610),
SET_SEC_DECO_LIODN_ENTRY(1, 542, 611),
+ SET_SEC_DECO_LIODN_ENTRY(2, 543, 612),
+ SET_SEC_DECO_LIODN_ENTRY(3, 544, 613),
+ SET_SEC_DECO_LIODN_ENTRY(4, 545, 614),
+ SET_SEC_DECO_LIODN_ENTRY(5, 546, 615),
+ SET_SEC_DECO_LIODN_ENTRY(6, 547, 616),
+ SET_SEC_DECO_LIODN_ENTRY(7, 548, 617),
};
int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl);
@@ -82,4 +91,7 @@ struct liodn_id_table liodn_bases[] = {
#ifdef CONFIG_SYS_DPAA_FMAN
[FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(973),
#endif
+#ifdef CONFIG_SYS_DPAA_PME
+ [FSL_HW_PORTAL_PME] = SET_LIODN_BASE_2(770, 846),
+#endif
};
diff --git a/arch/powerpc/cpu/mpc85xx/t2080_ids.c b/arch/powerpc/cpu/mpc85xx/t2080_ids.c
index 0bfd447..eda7f59 100644
--- a/arch/powerpc/cpu/mpc85xx/t2080_ids.c
+++ b/arch/powerpc/cpu/mpc85xx/t2080_ids.c
@@ -63,9 +63,9 @@ struct liodn_id_table liodn_tbl[] = {
SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 3, 308),
SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 4, 388),
- SET_DMA_LIODN(1, 147),
- SET_DMA_LIODN(2, 227),
- SET_DMA_LIODN(3, 226),
+ SET_DMA_LIODN(1, "fsl,elo3-dma", 147),
+ SET_DMA_LIODN(2, "fsl,elo3-dma", 227),
+ SET_DMA_LIODN(3, "fsl,elo3-dma", 226),
SET_GUTS_LIODN("fsl,rapidio-delta", 199, rio1liodnr, 0),
SET_GUTS_LIODN(NULL, 200, rio2liodnr, 0),
diff --git a/arch/powerpc/cpu/mpc85xx/t2080_serdes.c b/arch/powerpc/cpu/mpc85xx/t2080_serdes.c
index 7138bb4..c65f41d 100644
--- a/arch/powerpc/cpu/mpc85xx/t2080_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/t2080_serdes.c
@@ -169,6 +169,7 @@ static const struct serdes_config serdes2_cfg_tbl[] = {
{0x01, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1} },
{0x29, {SRIO2, SRIO2, SRIO2, SRIO2, SRIO1, SRIO1, SRIO1, SRIO1} },
{0x2D, {SRIO2, SRIO2, SRIO2, SRIO2, SRIO1, SRIO1, SRIO1, SRIO1} },
+ {0x2E, {SRIO2, SRIO2, SRIO2, SRIO2, SRIO1, SRIO1, SRIO1, SRIO1} },
{0x15, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, SATA1, SATA2} },
{0x27, {PCIE1, PCIE1, PCIE1, PCIE1, NONE, NONE, SATA1, SATA2} },
{0x18, {PCIE1, PCIE1, PCIE1, PCIE1, AURORA, AURORA, SATA1, SATA2} },
diff --git a/arch/powerpc/cpu/mpc85xx/t4240_ids.c b/arch/powerpc/cpu/mpc85xx/t4240_ids.c
index 1a3cb33..470b080 100644
--- a/arch/powerpc/cpu/mpc85xx/t4240_ids.c
+++ b/arch/powerpc/cpu/mpc85xx/t4240_ids.c
@@ -93,8 +93,8 @@ struct liodn_id_table liodn_tbl[] = {
SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 3, 308),
SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 4, 388),
- SET_DMA_LIODN(1, 147),
- SET_DMA_LIODN(2, 227),
+ SET_DMA_LIODN(1, "fsl,elo3-dma", 147),
+ SET_DMA_LIODN(2, "fsl,elo3-dma", 227),
SET_GUTS_LIODN("fsl,rapidio-delta", 199, rio1liodnr, 0),
SET_GUTS_LIODN(NULL, 200, rio2liodnr, 0),
diff --git a/arch/powerpc/cpu/mpc8xx/Kconfig b/arch/powerpc/cpu/mpc8xx/Kconfig
index e447748e..99420ab 100644
--- a/arch/powerpc/cpu/mpc8xx/Kconfig
+++ b/arch/powerpc/cpu/mpc8xx/Kconfig
@@ -13,9 +13,6 @@ config TARGET_COGENT_MPC8XX
config TARGET_ESTEEM192E
bool "Support ESTEEM192E"
-config TARGET_HERMES
- bool "Support hermes"
-
config TARGET_IP860
bool "Support IP860"
@@ -112,7 +109,6 @@ source "board/LEOX/elpt860/Kconfig"
source "board/RRvision/Kconfig"
source "board/cogent/Kconfig"
source "board/esteem192e/Kconfig"
-source "board/hermes/Kconfig"
source "board/ip860/Kconfig"
source "board/ivm/Kconfig"
source "board/kup/kup4k/Kconfig"
diff --git a/arch/powerpc/cpu/mpc8xx/cpu_init.c b/arch/powerpc/cpu/mpc8xx/cpu_init.c
index 60c401e..6a1cd46 100644
--- a/arch/powerpc/cpu/mpc8xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc8xx/cpu_init.c
@@ -125,8 +125,7 @@ void cpu_init_f (volatile immap_t * immr)
* I owe him a free beer. - wd]
*/
-#if defined(CONFIG_HERMES) || \
- defined(CONFIG_IP860) || \
+#if defined(CONFIG_IP860) || \
defined(CONFIG_IVML24) || \
defined(CONFIG_IVMS8) || \
defined(CONFIG_LWMON) || \
diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c
index 84fec5e..2d28eb2 100644
--- a/arch/powerpc/cpu/mpc8xxx/cpu.c
+++ b/arch/powerpc/cpu/mpc8xxx/cpu.c
@@ -76,6 +76,10 @@ static struct cpu_type cpu_type_list[] = {
CPU_TYPE_ENTRY(T1020, T1020, 0),
CPU_TYPE_ENTRY(T1021, T1021, 0),
CPU_TYPE_ENTRY(T1022, T1022, 0),
+ CPU_TYPE_ENTRY(T1024, T1024, 0),
+ CPU_TYPE_ENTRY(T1023, T1023, 0),
+ CPU_TYPE_ENTRY(T1014, T1014, 0),
+ CPU_TYPE_ENTRY(T1013, T1013, 0),
CPU_TYPE_ENTRY(T2080, T2080, 0),
CPU_TYPE_ENTRY(T2081, T2081, 0),
CPU_TYPE_ENTRY(BSC9130, 9130, 1),
diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c
index c6b4d95..1c63f93 100644
--- a/arch/powerpc/cpu/mpc8xxx/fdt.c
+++ b/arch/powerpc/cpu/mpc8xxx/fdt.c
@@ -73,110 +73,6 @@ void ft_fixup_num_cores(void *blob) {
}
#endif /* defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) */
-#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
-static int fdt_fixup_usb_mode_phy_type(void *blob, const char *mode,
- const char *phy_type, int start_offset)
-{
- const char *compat_dr = "fsl-usb2-dr";
- const char *compat_mph = "fsl-usb2-mph";
- const char *prop_mode = "dr_mode";
- const char *prop_type = "phy_type";
- const char *node_type = NULL;
- int node_offset;
- int err;
-
- node_offset = fdt_node_offset_by_compatible(blob,
- start_offset, compat_mph);
- if (node_offset < 0) {
- node_offset = fdt_node_offset_by_compatible(blob,
- start_offset, compat_dr);
- if (node_offset < 0) {
- printf("WARNING: could not find compatible"
- " node %s or %s: %s.\n", compat_mph,
- compat_dr, fdt_strerror(node_offset));
- return -1;
- } else
- node_type = compat_dr;
- } else
- node_type = compat_mph;
-
- if (mode) {
- err = fdt_setprop(blob, node_offset, prop_mode, mode,
- strlen(mode) + 1);
- if (err < 0)
- printf("WARNING: could not set %s for %s: %s.\n",
- prop_mode, node_type, fdt_strerror(err));
- }
-
- if (phy_type) {
- err = fdt_setprop(blob, node_offset, prop_type, phy_type,
- strlen(phy_type) + 1);
- if (err < 0)
- printf("WARNING: could not set %s for %s: %s.\n",
- prop_type, node_type, fdt_strerror(err));
- }
-
- return node_offset;
-}
-
-void fdt_fixup_dr_usb(void *blob, bd_t *bd)
-{
- const char *modes[] = { "host", "peripheral", "otg" };
- const char *phys[] = { "ulpi", "utmi" };
- int usb_mode_off = -1;
- int usb_phy_off = -1;
- char str[5];
- int i, j;
-
- for (i = 1; i <= CONFIG_USB_MAX_CONTROLLER_COUNT; i++) {
- const char *dr_mode_type = NULL;
- const char *dr_phy_type = NULL;
- int mode_idx = -1, phy_idx = -1;
- snprintf(str, 5, "%s%d", "usb", i);
- if (hwconfig(str)) {
- for (j = 0; j < ARRAY_SIZE(modes); j++) {
- if (hwconfig_subarg_cmp(str, "dr_mode",
- modes[j])) {
- mode_idx = j;
- break;
- }
- }
-
- for (j = 0; j < ARRAY_SIZE(phys); j++) {
- if (hwconfig_subarg_cmp(str, "phy_type",
- phys[j])) {
- phy_idx = j;
- break;
- }
- }
-
- if (mode_idx < 0 && phy_idx < 0) {
- printf("WARNING: invalid phy or mode\n");
- return;
- }
-
- if (mode_idx > -1)
- dr_mode_type = modes[mode_idx];
-
- if (phy_idx > -1)
- dr_phy_type = phys[phy_idx];
- }
-
- usb_mode_off = fdt_fixup_usb_mode_phy_type(blob,
- dr_mode_type, NULL, usb_mode_off);
-
- if (usb_mode_off < 0)
- return;
-
- usb_phy_off = fdt_fixup_usb_mode_phy_type(blob,
- NULL, dr_phy_type, usb_phy_off);
-
- if (usb_phy_off < 0)
- return;
- }
-}
-#endif /* defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) */
-
/*
* update crypto node properties to a specified revision of the SEC
* called with sec_rev == 0 if not on an E processor
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 7860b40..01b0905 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -769,6 +769,7 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022)
#define CONFIG_SYS_PME_CLK CONFIG_PME_PLAT_CLK_DIV
#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_5_0
#define CONFIG_SYS_FSL_IFC_BANK_COUNT 8
+#define CONFIG_SYS_FSL_ERRATUM_A008044
#define CONFIG_SYS_FMAN_V3
#define CONFIG_FM_PLAT_CLK_DIV 1
#define CONFIG_SYS_FM1_CLK CONFIG_FM_PLAT_CLK_DIV
@@ -786,6 +787,52 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022)
#define MAX_QE_RISC 1
#define QE_NUM_OF_SNUM 28
+#elif defined(CONFIG_PPC_T1024) || defined(CONFIG_PPC_T1023) ||\
+defined(CONFIG_PPC_T1014) || defined(CONFIG_PPC_T1013)
+#define CONFIG_E5500
+#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */
+#define CONFIG_SYS_FSL_QORIQ_CHASSIS2 /* Freescale Chassis generation 2 */
+#define CONFIG_SYS_FSL_CORES_PER_CLUSTER 1
+#define CONFIG_SYS_FSL_QMAN_V3 /* QMAN version 3 */
+#define CONFIG_SYS_FMAN_V3
+#ifdef CONFIG_SYS_FSL_DDR4
+#define CONFIG_SYS_FSL_DDRC_GEN4
+#endif
+#if defined(CONFIG_PPC_T1024) || defined(CONFIG_PPC_T1023)
+#define CONFIG_MAX_CPUS 2
+#elif defined(CONFIG_PPC_T1014) || defined(CONFIG_PPC_T1013)
+#define CONFIG_MAX_CPUS 1
+#endif
+#define CONFIG_SYS_FSL_NUM_CC_PLL 2
+#define CONFIG_SYS_FSL_CLUSTER_CLOCKS { 1, 1, 1, 1 }
+#define CONFIG_SYS_SDHC_CLOCK 0
+#define CONFIG_SYS_FSL_NUM_LAWS 16
+#define CONFIG_SYS_FSL_SRDS_1
+#define CONFIG_SYS_FSL_SEC_COMPAT 5
+#define CONFIG_SYS_NUM_FMAN 1
+#define CONFIG_SYS_NUM_FM1_DTSEC 4
+#define CONFIG_SYS_NUM_FM1_10GEC 1
+#define CONFIG_FSL_FM_10GEC_REGULAR_NOTATION
+#define CONFIG_NUM_DDR_CONTROLLERS 1
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_5_0
+#define CONFIG_SYS_FSL_IFC_BANK_COUNT 8
+#define CONFIG_SYS_FM1_CLK 0
+#define CONFIG_QBMAN_CLK_DIV 1
+#define CONFIG_SYS_FM_MURAM_SIZE 0x30000
+#define CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
+#define CONFIG_SYS_FSL_TBCLK_DIV 16
+#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.4"
+#define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE
+#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
+#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
+#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
+#define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE
+#define QE_MURAM_SIZE 0x6000UL
+#define MAX_QE_RISC 1
+#define QE_NUM_OF_SNUM 28
+#define CONFIG_SYS_FSL_SFP_VER_3_0
+
#elif defined(CONFIG_PPC_T2080) || defined(CONFIG_PPC_T2081)
#define CONFIG_E6500
#define CONFIG_SYS_PPC64 /* 64-bit core */
diff --git a/arch/powerpc/include/asm/fsl_errata.h b/arch/powerpc/include/asm/fsl_errata.h
index b9e2fb0..61c6d70 100644
--- a/arch/powerpc/include/asm/fsl_errata.h
+++ b/arch/powerpc/include/asm/fsl_errata.h
@@ -27,3 +27,27 @@ static inline bool has_erratum_a006379(void)
}
#endif
#endif
+
+#ifdef CONFIG_SYS_FSL_ERRATUM_A007186
+static inline bool has_erratum_a007186(void)
+{
+ u32 svr = get_svr();
+ u32 soc = SVR_SOC_VER(svr);
+
+ switch (soc) {
+ case SVR_T4240:
+ return IS_SVR_REV(svr, 2, 0);
+ case SVR_T4160:
+ return IS_SVR_REV(svr, 2, 0);
+ case SVR_B4860:
+ return IS_SVR_REV(svr, 2, 0);
+ case SVR_B4420:
+ return IS_SVR_REV(svr, 2, 0);
+ case SVR_T2081:
+ case SVR_T2080:
+ return IS_SVR_REV(svr, 1, 0);
+ }
+
+ return false;
+}
+#endif
diff --git a/arch/powerpc/include/asm/fsl_liodn.h b/arch/powerpc/include/asm/fsl_liodn.h
index adfbb66..811f034 100644
--- a/arch/powerpc/include/asm/fsl_liodn.h
+++ b/arch/powerpc/include/asm/fsl_liodn.h
@@ -91,8 +91,8 @@ extern void fdt_fixup_liodn(void *blob);
CONFIG_SYS_MPC85xx_PCIE##pciNum##_OFFSET)
/* reg nodes for DMA start @ 0x300 */
-#define SET_DMA_LIODN(dmaNum, liodn) \
- SET_GUTS_LIODN("fsl,eloplus-dma", liodn, dma##dmaNum##liodnr,\
+#define SET_DMA_LIODN(dmaNum, compat, liodn) \
+ SET_GUTS_LIODN(compat, liodn, dma##dmaNum##liodnr,\
CONFIG_SYS_MPC85xx_DMA##dmaNum##_OFFSET + 0x300)
#define SET_SDHC_LIODN(sdhcNum, liodn) \
diff --git a/arch/powerpc/include/asm/fsl_secure_boot.h b/arch/powerpc/include/asm/fsl_secure_boot.h
index 74c5d8f..14c6fc3 100644
--- a/arch/powerpc/include/asm/fsl_secure_boot.h
+++ b/arch/powerpc/include/asm/fsl_secure_boot.h
@@ -22,7 +22,9 @@
defined(CONFIG_T2080QDS) || \
defined(CONFIG_T2080RDB) || \
defined(CONFIG_T1040QDS) || \
- defined(CONFIG_T104xRDB)
+ defined(CONFIG_T104xRDB) || \
+ defined(CONFIG_PPC_T1023) || \
+ defined(CONFIG_PPC_T1024)
#define CONFIG_SYS_CPC_REINIT_F
#undef CONFIG_SYS_INIT_L3_ADDR
#define CONFIG_SYS_INIT_L3_ADDR 0xbff00000
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 0264523..ace1d12 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -1626,10 +1626,15 @@ typedef struct ccsr_gur {
#define FSL_CORENET_DEVDISR2_DTSEC1_6 0x04000000
#define FSL_CORENET_DEVDISR2_DTSEC1_9 0x00800000
#define FSL_CORENET_DEVDISR2_DTSEC1_10 0x00400000
+#ifdef CONFIG_FSL_FM_10GEC_REGULAR_NOTATION
+#define FSL_CORENET_DEVDISR2_10GEC1_1 0x80000000
+#define FSL_CORENET_DEVDISR2_10GEC1_2 0x40000000
+#else
#define FSL_CORENET_DEVDISR2_10GEC1_1 0x00800000
#define FSL_CORENET_DEVDISR2_10GEC1_2 0x00400000
#define FSL_CORENET_DEVDISR2_10GEC1_3 0x80000000
#define FSL_CORENET_DEVDISR2_10GEC1_4 0x40000000
+#endif
#define FSL_CORENET_DEVDISR2_DTSEC2_1 0x00080000
#define FSL_CORENET_DEVDISR2_DTSEC2_2 0x00040000
#define FSL_CORENET_DEVDISR2_DTSEC2_3 0x00020000
@@ -1787,6 +1792,21 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022)
#define PXCKEN_MASK 0x80000000
#define PXCK_MASK 0x00FF0000
#define PXCK_BITS_START 16
+#elif defined(CONFIG_PPC_T1024) || defined(CONFIG_PPC_T1023) || \
+ defined(CONFIG_PPC_T1014) || defined(CONFIG_PPC_T1013)
+#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL 0xff800000
+#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT 23
+#define FSL_CORENET_RCWSR6_BOOT_LOC 0x0f800000
+#define FSL_CORENET_RCWSR13_EC1 0x30000000 /* bits 418..419 */
+#define FSL_CORENET_RCWSR13_EC1_RGMII 0x00000000
+#define FSL_CORENET_RCWSR13_EC1_GPIO 0x10000000
+#define FSL_CORENET_RCWSR13_EC2 0x0c000000
+#define FSL_CORENET_RCWSR13_EC2_RGMII 0x08000000
+#define CONFIG_SYS_FSL_SCFG_PIXCLKCR_OFFSET 0x28
+#define CONFIG_SYS_FSL_SCFG_IODSECR1_OFFSET 0xd00
+#define PXCKEN_MASK 0x80000000
+#define PXCK_MASK 0x00FF0000
+#define PXCK_BITS_START 16
#elif defined(CONFIG_PPC_T2080) || defined(CONFIG_PPC_T2081)
#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL 0xff000000
#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT 24
@@ -2971,6 +2991,8 @@ struct ccsr_sfp_regs {
(CONFIG_SYS_CCSRBAR + CONFIG_SYS_FSL_SCFG_OFFSET)
#define CONFIG_SYS_FSL_SCFG_PIXCLK_ADDR \
(CONFIG_SYS_FSL_SCFG_ADDR + CONFIG_SYS_FSL_SCFG_PIXCLKCR_OFFSET)
+#define CONFIG_SYS_FSL_SCFG_IODSECR1_ADDR \
+ (CONFIG_SYS_FSL_SCFG_ADDR + CONFIG_SYS_FSL_SCFG_IODSECR1_OFFSET)
#define CONFIG_SYS_FSL_QMAN_ADDR \
(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_QMAN_OFFSET)
#define CONFIG_SYS_FSL_BMAN_ADDR \
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 1b98e0f..2ed51b1 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -1133,6 +1133,10 @@
#define SVR_T1020 0x852100
#define SVR_T1021 0x852101
#define SVR_T1022 0x852102
+#define SVR_T1024 0x854000
+#define SVR_T1023 0x854100
+#define SVR_T1014 0x854400
+#define SVR_T1013 0x854500
#define SVR_T2080 0x853000
#define SVR_T2081 0x853100
diff --git a/arch/powerpc/lib/board.c b/arch/powerpc/lib/board.c
index 6eaab88..e6d5355 100644
--- a/arch/powerpc/lib/board.c
+++ b/arch/powerpc/lib/board.c
@@ -820,13 +820,6 @@ void board_init_r(gd_t *id, ulong dest_addr)
mac_read_from_eeprom();
#endif
-#ifdef CONFIG_HERMES
- if ((gd->board_type >> 16) == 2)
- bd->bi_ethspeed = gd->board_type & 0xFFFF;
- else
- bd->bi_ethspeed = 0xFFFF;
-#endif
-
#ifdef CONFIG_CMD_NET
/* kept around for legacy kernels only ... ignore the next section */
eth_getenv_enetaddr("ethaddr", bd->bi_enetaddr);
@@ -876,11 +869,6 @@ void board_init_r(gd_t *id, ulong dest_addr)
misc_init_r();
#endif
-#ifdef CONFIG_HERMES
- if (bd->bi_ethspeed != 0xFFFF)
- hermes_start_lxt980((int) bd->bi_ethspeed);
-#endif
-
#if defined(CONFIG_CMD_KGDB)
WATCHDOG_RESET();
puts("KGDB: ");
diff --git a/arch/sandbox/Makefile b/arch/sandbox/Makefile
new file mode 100644
index 0000000..23fdcdb
--- /dev/null
+++ b/arch/sandbox/Makefile
@@ -0,0 +1,8 @@
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+head-y := arch/sandbox/cpu/start.o
+
+libs-y += arch/sandbox/cpu/
+libs-y += arch/sandbox/lib/
diff --git a/arch/sandbox/dts/sandbox.dts b/arch/sandbox/dts/sandbox.dts
index 7614715..11748ae 100644
--- a/arch/sandbox/dts/sandbox.dts
+++ b/arch/sandbox/dts/sandbox.dts
@@ -134,6 +134,23 @@
num-gpios = <20>;
};
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ compatible = "sandbox,i2c";
+ clock-frequency = <400000>;
+ eeprom@2c {
+ reg = <0x2c>;
+ compatible = "i2c-eeprom";
+ emul {
+ compatible = "sandbox,i2c-eeprom";
+ sandbox,filename = "i2c.bin";
+ sandbox,size = <128>;
+ };
+ };
+ };
+
spi@0 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/sandbox/include/asm/test.h b/arch/sandbox/include/asm/test.h
new file mode 100644
index 0000000..25a0c85
--- /dev/null
+++ b/arch/sandbox/include/asm/test.h
@@ -0,0 +1,26 @@
+/*
+ * Test-related constants for sandbox
+ *
+ * Copyright (c) 2014 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ASM_TEST_H
+#define __ASM_TEST_H
+
+/* The sandbox driver always permits an I2C device with this address */
+#define SANDBOX_I2C_TEST_ADDR 0x59
+
+enum sandbox_i2c_eeprom_test_mode {
+ SIE_TEST_MODE_NONE,
+ /* Permits read/write of only one byte per I2C transaction */
+ SIE_TEST_MODE_SINGLE_BYTE,
+};
+
+void sandbox_i2c_eeprom_set_test_mode(struct udevice *dev,
+ enum sandbox_i2c_eeprom_test_mode mode);
+
+void sandbox_i2c_eeprom_set_offset_len(struct udevice *dev, int offset_len);
+
+#endif
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
new file mode 100644
index 0000000..ca55fac
--- /dev/null
+++ b/arch/sh/Makefile
@@ -0,0 +1,8 @@
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+head-y := arch/sh/cpu/$(CPU)/start.o
+
+libs-y += arch/sh/cpu/$(CPU)/
+libs-y += arch/sh/lib/
diff --git a/arch/sh/include/asm/unaligned.h b/arch/sh/include/asm/unaligned.h
index 2e0d164..06096ee 100644
--- a/arch/sh/include/asm/unaligned.h
+++ b/arch/sh/include/asm/unaligned.h
@@ -8,7 +8,7 @@
#include <asm/unaligned-sh4a.h>
#else
/* Otherwise, SH can't handle unaligned accesses. */
-#include <compiler.h>
+#include <linux/compiler.h>
#if defined(__BIG_ENDIAN__)
#define get_unaligned __get_unaligned_be
#define put_unaligned __put_unaligned_be
diff --git a/arch/sparc/Makefile b/arch/sparc/Makefile
new file mode 100644
index 0000000..2d4c971
--- /dev/null
+++ b/arch/sparc/Makefile
@@ -0,0 +1,8 @@
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+head-y := arch/sparc/cpu/$(CPU)/start.o
+
+libs-y += arch/sparc/cpu/$(CPU)/
+libs-y += arch/sparc/lib/
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 4f5ce38..fdfb618 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -61,9 +61,85 @@ config SMM_TSEG
config SMM_TSEG_SIZE
hex
+config BOARD_ROMSIZE_KB_512
+ bool
+config BOARD_ROMSIZE_KB_1024
+ bool
+config BOARD_ROMSIZE_KB_2048
+ bool
+config BOARD_ROMSIZE_KB_4096
+ bool
+config BOARD_ROMSIZE_KB_8192
+ bool
+config BOARD_ROMSIZE_KB_16384
+ bool
+
+choice
+ prompt "ROM chip size"
+ default UBOOT_ROMSIZE_KB_512 if BOARD_ROMSIZE_KB_512
+ default UBOOT_ROMSIZE_KB_1024 if BOARD_ROMSIZE_KB_1024
+ default UBOOT_ROMSIZE_KB_2048 if BOARD_ROMSIZE_KB_2048
+ default UBOOT_ROMSIZE_KB_4096 if BOARD_ROMSIZE_KB_4096
+ default UBOOT_ROMSIZE_KB_8192 if BOARD_ROMSIZE_KB_8192
+ default UBOOT_ROMSIZE_KB_16384 if BOARD_ROMSIZE_KB_16384
+ help
+ Select the size of the ROM chip you intend to flash U-Boot on.
+
+ The build system will take care of creating a u-boot.rom file
+ of the matching size.
+
+config UBOOT_ROMSIZE_KB_512
+ bool "512 KB"
+ help
+ Choose this option if you have a 512 KB ROM chip.
+
+config UBOOT_ROMSIZE_KB_1024
+ bool "1024 KB (1 MB)"
+ help
+ Choose this option if you have a 1024 KB (1 MB) ROM chip.
+
+config UBOOT_ROMSIZE_KB_2048
+ bool "2048 KB (2 MB)"
+ help
+ Choose this option if you have a 2048 KB (2 MB) ROM chip.
+
+config UBOOT_ROMSIZE_KB_4096
+ bool "4096 KB (4 MB)"
+ help
+ Choose this option if you have a 4096 KB (4 MB) ROM chip.
+
+config UBOOT_ROMSIZE_KB_8192
+ bool "8192 KB (8 MB)"
+ help
+ Choose this option if you have a 8192 KB (8 MB) ROM chip.
+
+config UBOOT_ROMSIZE_KB_16384
+ bool "16384 KB (16 MB)"
+ help
+ Choose this option if you have a 16384 KB (16 MB) ROM chip.
+
+endchoice
+
+# Map the config names to an integer (KB).
+config UBOOT_ROMSIZE_KB
+ int
+ default 512 if UBOOT_ROMSIZE_KB_512
+ default 1024 if UBOOT_ROMSIZE_KB_1024
+ default 2048 if UBOOT_ROMSIZE_KB_2048
+ default 4096 if UBOOT_ROMSIZE_KB_4096
+ default 8192 if UBOOT_ROMSIZE_KB_8192
+ default 16384 if UBOOT_ROMSIZE_KB_16384
+
+# Map the config names to a hex value (bytes).
config ROM_SIZE
hex
- default 0x800000
+ default 0x80000 if UBOOT_ROMSIZE_KB_512
+ default 0x100000 if UBOOT_ROMSIZE_KB_1024
+ default 0x200000 if UBOOT_ROMSIZE_KB_2048
+ default 0x400000 if UBOOT_ROMSIZE_KB_4096
+ default 0x800000 if UBOOT_ROMSIZE_KB_8192
+ default 0xc00000 if UBOOT_ROMSIZE_KB_12288
+ default 0x1000000 if UBOOT_ROMSIZE_KB_16384
config HAVE_INTEL_ME
bool "Platform requires Intel Management Engine"
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
new file mode 100644
index 0000000..36a6018
--- /dev/null
+++ b/arch/x86/Makefile
@@ -0,0 +1,12 @@
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+head-y := arch/x86/cpu/start.o
+ifeq ($(CONFIG_SPL_BUILD),y)
+head-y += arch/x86/cpu/start16.o
+head-y += arch/x86/cpu/resetvec.o
+endif
+
+libs-y += arch/x86/cpu/
+libs-y += arch/x86/lib/
diff --git a/arch/x86/cpu/coreboot/ipchecksum.c b/arch/x86/cpu/coreboot/ipchecksum.c
index 5f6c009..3340872 100644
--- a/arch/x86/cpu/coreboot/ipchecksum.c
+++ b/arch/x86/cpu/coreboot/ipchecksum.c
@@ -29,7 +29,8 @@
* SUCH DAMAGE.
*/
-#include <compiler.h>
+#include <linux/types.h>
+#include <linux/compiler.h>
#include <asm/arch/ipchecksum.h>
unsigned short ipchksum(const void *vptr, unsigned long nbytes)
diff --git a/arch/x86/cpu/ivybridge/cpu.c b/arch/x86/cpu/ivybridge/cpu.c
index 60976db..969b07b 100644
--- a/arch/x86/cpu/ivybridge/cpu.c
+++ b/arch/x86/cpu/ivybridge/cpu.c
@@ -263,6 +263,7 @@ static void enable_usb_bar(void)
static int report_bist_failure(void)
{
if (gd->arch.bist != 0) {
+ post_code(POST_BIST_FAILURE);
printf("BIST failed: %08x\n", gd->arch.bist);
return -EFAULT;
}
diff --git a/arch/x86/cpu/queensbay/fsp_configs.c b/arch/x86/cpu/queensbay/fsp_configs.c
new file mode 100644
index 0000000..aef18fc
--- /dev/null
+++ b/arch/x86/cpu/queensbay/fsp_configs.c
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2013, Intel Corporation
+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier: Intel
+ */
+
+#include <common.h>
+#include <asm/arch/fsp/fsp_support.h>
+
+void update_fsp_upd(struct upd_region_t *fsp_upd)
+{
+ /* Override any UPD setting if required */
+
+ /* Uncomment the line below to enable DEBUG message */
+ /* fsp_upd->serial_dbgport_type = 1; */
+
+ /* Examples on how to initialize the pointers in UPD region */
+ /* fsp_upd->pcd_example = (EXAMPLE_DATA *)&example; */
+}
diff --git a/arch/x86/cpu/queensbay/fsp_support.c b/arch/x86/cpu/queensbay/fsp_support.c
new file mode 100644
index 0000000..df3bbd0
--- /dev/null
+++ b/arch/x86/cpu/queensbay/fsp_support.c
@@ -0,0 +1,416 @@
+/*
+ * Copyright (C) 2013, Intel Corporation
+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier: Intel
+ */
+
+#include <common.h>
+#include <asm/arch/fsp/fsp_support.h>
+#include <asm/post.h>
+
+/**
+ * Reads a 64-bit value from memory that may be unaligned.
+ *
+ * This function returns the 64-bit value pointed to by buf. The function
+ * guarantees that the read operation does not produce an alignment fault.
+ *
+ * If the buf is NULL, then ASSERT().
+ *
+ * @buf: Pointer to a 64-bit value that may be unaligned.
+ *
+ * @return: The 64-bit value read from buf.
+ */
+static u64 read_unaligned64(const u64 *buf)
+{
+ ASSERT(buf != NULL);
+
+ return *buf;
+}
+
+/**
+ * Compares two GUIDs
+ *
+ * If the GUIDs are identical then TRUE is returned.
+ * If there are any bit differences in the two GUIDs, then FALSE is returned.
+ *
+ * If guid1 is NULL, then ASSERT().
+ * If guid2 is NULL, then ASSERT().
+ *
+ * @guid1: A pointer to a 128 bit GUID.
+ * @guid2: A pointer to a 128 bit GUID.
+ *
+ * @retval TRUE: guid1 and guid2 are identical.
+ * @retval FALSE: guid1 and guid2 are not identical.
+ */
+static unsigned char compare_guid(const struct efi_guid_t *guid1,
+ const struct efi_guid_t *guid2)
+{
+ u64 guid1_low;
+ u64 guid2_low;
+ u64 guid1_high;
+ u64 guid2_high;
+
+ guid1_low = read_unaligned64((const u64 *)guid1);
+ guid2_low = read_unaligned64((const u64 *)guid2);
+ guid1_high = read_unaligned64((const u64 *)guid1 + 1);
+ guid2_high = read_unaligned64((const u64 *)guid2 + 1);
+
+ return (unsigned char)(guid1_low == guid2_low && guid1_high == guid2_high);
+}
+
+u32 __attribute__((optimize("O0"))) find_fsp_header(void)
+{
+ volatile register u8 *fsp asm("eax");
+
+ /* Initalize the FSP base */
+ fsp = (u8 *)CONFIG_FSP_LOCATION;
+
+ /* Check the FV signature, _FVH */
+ if (((struct fv_header_t *)fsp)->sign == 0x4856465F) {
+ /* Go to the end of the FV header and align the address */
+ fsp += ((struct fv_header_t *)fsp)->ext_hdr_off;
+ fsp += ((struct fv_ext_header_t *)fsp)->ext_hdr_size;
+ fsp = (u8 *)(((u32)fsp + 7) & 0xFFFFFFF8);
+ } else {
+ fsp = 0;
+ }
+
+ /* Check the FFS GUID */
+ if (fsp &&
+ (((u32 *)&(((struct ffs_file_header_t *)fsp)->name))[0] == 0x912740BE) &&
+ (((u32 *)&(((struct ffs_file_header_t *)fsp)->name))[1] == 0x47342284) &&
+ (((u32 *)&(((struct ffs_file_header_t *)fsp)->name))[2] == 0xB08471B9) &&
+ (((u32 *)&(((struct ffs_file_header_t *)fsp)->name))[3] == 0x0C3F3527)) {
+ /* Add the FFS header size to find the raw section header */
+ fsp += sizeof(struct ffs_file_header_t);
+ } else {
+ fsp = 0;
+ }
+
+ if (fsp &&
+ ((struct raw_section_t *)fsp)->type == EFI_SECTION_RAW) {
+ /* Add the raw section header size to find the FSP header */
+ fsp += sizeof(struct raw_section_t);
+ } else {
+ fsp = 0;
+ }
+
+ return (u32)fsp;
+}
+
+void fsp_continue(struct shared_data_t *shared_data, u32 status, void *hob_list)
+{
+ u32 stack_len;
+ u32 stack_base;
+ u32 stack_top;
+
+ post_code(POST_MRC);
+
+ ASSERT(status == 0);
+
+ /* Get the migrated stack in normal memory */
+ stack_base = (u32)get_bootloader_tmp_mem(hob_list, &stack_len);
+ ASSERT(stack_base != 0);
+ stack_top = stack_base + stack_len - sizeof(u32);
+
+ /*
+ * Old stack base is stored at the very end of the stack top,
+ * use it to calculate the migrated shared data base
+ */
+ shared_data = (struct shared_data_t *)(stack_base +
+ ((u32)shared_data - *(u32 *)stack_top));
+
+ /* The boot loader main function entry */
+ fsp_init_done(hob_list);
+}
+
+void fsp_init(u32 stack_top, u32 boot_mode, void *nvs_buf)
+{
+ struct shared_data_t shared_data;
+ fsp_init_f init;
+ struct fsp_init_params_t params;
+ struct fspinit_rtbuf_t rt_buf;
+ struct vpd_region_t *fsp_vpd;
+ struct fsp_header_t *fsp_hdr;
+ struct fsp_init_params_t *params_ptr;
+ struct upd_region_t *fsp_upd;
+
+ fsp_hdr = (struct fsp_header_t *)find_fsp_header();
+ if (fsp_hdr == NULL) {
+ /* No valid FSP info header was found */
+ ASSERT(FALSE);
+ }
+
+ fsp_upd = (struct upd_region_t *)&shared_data.fsp_upd;
+ memset((void *)&rt_buf, 0, sizeof(struct fspinit_rtbuf_t));
+
+ /* Reserve a gap in stack top */
+ rt_buf.common.stack_top = (u32 *)stack_top - 32;
+ rt_buf.common.boot_mode = boot_mode;
+ rt_buf.common.upd_data = (struct upd_region_t *)fsp_upd;
+
+ /* Get VPD region start */
+ fsp_vpd = (struct vpd_region_t *)(fsp_hdr->img_base +
+ fsp_hdr->cfg_region_off);
+
+ /* Verifify the VPD data region is valid */
+ ASSERT((fsp_vpd->img_rev == VPD_IMAGE_REV) &&
+ (fsp_vpd->sign == VPD_IMAGE_ID));
+
+ /* Copy default data from Flash */
+ memcpy(fsp_upd, (void *)(fsp_hdr->img_base + fsp_vpd->upd_offset),
+ sizeof(struct upd_region_t));
+
+ /* Verifify the UPD data region is valid */
+ ASSERT(fsp_upd->terminator == 0x55AA);
+
+ /* Override any UPD setting if required */
+ update_fsp_upd(fsp_upd);
+
+ memset((void *)&params, 0, sizeof(struct fsp_init_params_t));
+ params.nvs_buf = nvs_buf;
+ params.rt_buf = (struct fspinit_rtbuf_t *)&rt_buf;
+ params.continuation = (fsp_continuation_f)asm_continuation;
+
+ init = (fsp_init_f)(fsp_hdr->img_base + fsp_hdr->fsp_init);
+ params_ptr = &params;
+
+ shared_data.fsp_hdr = fsp_hdr;
+ shared_data.stack_top = (u32 *)stack_top;
+
+ post_code(POST_PRE_MRC);
+
+ /*
+ * Use ASM code to ensure the register value in EAX & ECX
+ * will be passed into BlContinuationFunc
+ */
+ asm volatile (
+ "pushl %0;"
+ "call *%%eax;"
+ ".global asm_continuation;"
+ "asm_continuation:;"
+ "movl %%ebx, %%eax;" /* shared_data */
+ "movl 4(%%esp), %%edx;" /* status */
+ "movl 8(%%esp), %%ecx;" /* hob_list */
+ "jmp fsp_continue;"
+ : : "m"(params_ptr), "a"(init), "b"(&shared_data)
+ );
+
+ /*
+ * Should never get here.
+ * Control will continue from romstage_main_continue_asm.
+ * This line below is to prevent the compiler from optimizing
+ * structure intialization.
+ */
+ init(&params);
+
+ /*
+ * Should never return.
+ * Control will continue from ContinuationFunc
+ */
+ ASSERT(FALSE);
+}
+
+u32 fsp_notify(struct fsp_header_t *fsp_hdr, u32 phase)
+{
+ fsp_notify_f notify;
+ struct fsp_notify_params_t params;
+ struct fsp_notify_params_t *params_ptr;
+ u32 status;
+
+ if (!fsp_hdr)
+ fsp_hdr = (struct fsp_header_t *)find_fsp_header();
+
+ if (fsp_hdr == NULL) {
+ /* No valid FSP info header */
+ ASSERT(FALSE);
+ }
+
+ notify = (fsp_notify_f)(fsp_hdr->img_base + fsp_hdr->fsp_notify);
+ params.phase = phase;
+ params_ptr = &params;
+
+ /*
+ * Use ASM code to ensure correct parameter is on the stack for
+ * FspNotify as U-Boot is using different ABI from FSP
+ */
+ asm volatile (
+ "pushl %1;" /* push notify phase */
+ "call *%%eax;" /* call FspNotify */
+ "addl $4, %%esp;" /* clean up the stack */
+ : "=a"(status) : "m"(params_ptr), "a"(notify), "m"(*params_ptr)
+ );
+
+ return status;
+}
+
+u32 get_usable_lowmem_top(const void *hob_list)
+{
+ union hob_pointers_t hob;
+ phys_addr_t phys_start;
+ u32 top;
+
+ /* Get the HOB list for processing */
+ hob.raw = (void *)hob_list;
+
+ /* * Collect memory ranges */
+ top = 0x100000;
+ while (!END_OF_HOB(hob)) {
+ if (hob.hdr->type == HOB_TYPE_RES_DESC) {
+ if (hob.res_desc->type == RES_SYS_MEM) {
+ phys_start = hob.res_desc->phys_start;
+ /* Need memory above 1MB to be collected here */
+ if (phys_start >= 0x100000 &&
+ phys_start < (phys_addr_t)0x100000000)
+ top += (u32)(hob.res_desc->len);
+ }
+ }
+ hob.raw = GET_NEXT_HOB(hob);
+ }
+
+ return top;
+}
+
+u64 get_usable_highmem_top(const void *hob_list)
+{
+ union hob_pointers_t hob;
+ phys_addr_t phys_start;
+ u64 top;
+
+ /* Get the HOB list for processing */
+ hob.raw = (void *)hob_list;
+
+ /* Collect memory ranges */
+ top = 0x100000000;
+ while (!END_OF_HOB(hob)) {
+ if (hob.hdr->type == HOB_TYPE_RES_DESC) {
+ if (hob.res_desc->type == RES_SYS_MEM) {
+ phys_start = hob.res_desc->phys_start;
+ /* Need memory above 1MB to be collected here */
+ if (phys_start >= (phys_addr_t)0x100000000)
+ top += (u32)(hob.res_desc->len);
+ }
+ }
+ hob.raw = GET_NEXT_HOB(hob);
+ }
+
+ return top;
+}
+
+u64 get_fsp_reserved_mem_from_guid(const void *hob_list, u64 *len,
+ struct efi_guid_t *guid)
+{
+ union hob_pointers_t hob;
+
+ /* Get the HOB list for processing */
+ hob.raw = (void *)hob_list;
+
+ /* Collect memory ranges */
+ while (!END_OF_HOB(hob)) {
+ if (hob.hdr->type == HOB_TYPE_RES_DESC) {
+ if (hob.res_desc->type == RES_MEM_RESERVED) {
+ if (compare_guid(&hob.res_desc->owner, guid)) {
+ if (len)
+ *len = (u32)(hob.res_desc->len);
+
+ return (u64)(hob.res_desc->phys_start);
+ }
+ }
+ }
+ hob.raw = GET_NEXT_HOB(hob);
+ }
+
+ return 0;
+}
+
+u32 get_fsp_reserved_mem(const void *hob_list, u32 *len)
+{
+ const struct efi_guid_t guid = FSP_HOB_RESOURCE_OWNER_FSP_GUID;
+ u64 length;
+ u32 base;
+
+ base = (u32)get_fsp_reserved_mem_from_guid(hob_list,
+ &length, (struct efi_guid_t *)&guid);
+ if ((len != 0) && (base != 0))
+ *len = (u32)length;
+
+ return base;
+}
+
+u32 get_tseg_reserved_mem(const void *hob_list, u32 *len)
+{
+ const struct efi_guid_t guid = FSP_HOB_RESOURCE_OWNER_TSEG_GUID;
+ u64 length;
+ u32 base;
+
+ base = (u32)get_fsp_reserved_mem_from_guid(hob_list,
+ &length, (struct efi_guid_t *)&guid);
+ if ((len != 0) && (base != 0))
+ *len = (u32)length;
+
+ return base;
+}
+
+void *get_next_hob(u16 type, const void *hob_list)
+{
+ union hob_pointers_t hob;
+
+ ASSERT(hob_list != NULL);
+
+ hob.raw = (u8 *)hob_list;
+
+ /* Parse the HOB list until end of list or matching type is found */
+ while (!END_OF_HOB(hob)) {
+ if (hob.hdr->type == type)
+ return hob.raw;
+
+ hob.raw = GET_NEXT_HOB(hob);
+ }
+
+ return NULL;
+}
+
+void *get_next_guid_hob(const struct efi_guid_t *guid, const void *hob_list)
+{
+ union hob_pointers_t hob;
+
+ hob.raw = (u8 *)hob_list;
+ while ((hob.raw = get_next_hob(HOB_TYPE_GUID_EXT,
+ hob.raw)) != NULL) {
+ if (compare_guid(guid, &hob.guid->name))
+ break;
+ hob.raw = GET_NEXT_HOB(hob);
+ }
+
+ return hob.raw;
+}
+
+void *get_guid_hob_data(const void *hob_list, u32 *len, struct efi_guid_t *guid)
+{
+ u8 *guid_hob;
+
+ guid_hob = get_next_guid_hob(guid, hob_list);
+ if (guid_hob == NULL) {
+ return NULL;
+ } else {
+ if (len)
+ *len = GET_GUID_HOB_DATA_SIZE(guid_hob);
+
+ return GET_GUID_HOB_DATA(guid_hob);
+ }
+}
+
+void *get_fsp_nvs_data(const void *hob_list, u32 *len)
+{
+ const struct efi_guid_t guid = FSP_NON_VOLATILE_STORAGE_HOB_GUID;
+
+ return get_guid_hob_data(hob_list, len, (struct efi_guid_t *)&guid);
+}
+
+void *get_bootloader_tmp_mem(const void *hob_list, u32 *len)
+{
+ const struct efi_guid_t guid = FSP_BOOTLOADER_TEMP_MEM_HOB_GUID;
+
+ return get_guid_hob_data(hob_list, len, (struct efi_guid_t *)&guid);
+}
diff --git a/arch/x86/cpu/start.S b/arch/x86/cpu/start.S
index b0d0ac0..125782c 100644
--- a/arch/x86/cpu/start.S
+++ b/arch/x86/cpu/start.S
@@ -1,5 +1,5 @@
/*
- * U-boot - x86 Startup Code
+ * U-Boot - x86 Startup Code
*
* (C) Copyright 2008-2011
* Graeme Russ, <graeme.russ@gmail.com>
@@ -17,6 +17,7 @@
#include <asm/processor.h>
#include <asm/processor-flags.h>
#include <generated/generic-asm-offsets.h>
+#include <generated/asm-offsets.h>
.section .text
.code32
@@ -74,6 +75,7 @@ early_board_init_ret:
jmp car_init
.globl car_init_ret
car_init_ret:
+#ifndef CONFIG_HAVE_FSP
/*
* We now have CONFIG_SYS_CAR_SIZE bytes of Cache-As-RAM (or SRAM,
* or fully initialised SDRAM - we really don't care which)
@@ -94,6 +96,12 @@ car_init_ret:
#ifdef CONFIG_DCACHE_RAM_MRC_VAR_SIZE
subl $CONFIG_DCACHE_RAM_MRC_VAR_SIZE, %esp
#endif
+#else
+ /*
+ * When we get here after car_init, esp points to a temporary stack
+ * and esi holds the HOB list address returned by the FSP.
+ */
+#endif
/* Reserve space on stack for global data */
subl $GENERATED_GBL_DATA_SIZE, %esp
@@ -108,6 +116,13 @@ car_init_ret:
movl %esp, %edi
rep stosb
+#ifdef CONFIG_HAVE_FSP
+ /* Store HOB list */
+ movl %esp, %edx
+ addl $GD_HOB_LIST, %edx
+ movl %esi, (%edx)
+#endif
+
/* Setup first parameter to setup_gdt, pointer to global_data */
movl %esp, %eax
diff --git a/arch/x86/dts/Makefile b/arch/x86/dts/Makefile
index bb3b116..3b5d6da 100644
--- a/arch/x86/dts/Makefile
+++ b/arch/x86/dts/Makefile
@@ -1,6 +1,7 @@
dtb-y += link.dtb \
chromebook_link.dtb \
- alex.dtb
+ alex.dtb \
+ crownbay.dtb
targets += $(dtb-y)
diff --git a/arch/x86/dts/crownbay.dts b/arch/x86/dts/crownbay.dts
new file mode 100644
index 0000000..399dafb
--- /dev/null
+++ b/arch/x86/dts/crownbay.dts
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+
+/include/ "coreboot.dtsi"
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ model = "Intel Crown Bay";
+ compatible = "intel,crownbay", "intel,queensbay";
+
+ config {
+ silent_console = <0>;
+ };
+
+ gpioa {
+ compatible = "intel,ich6-gpio";
+ u-boot,dm-pre-reloc;
+ reg = <0 0x20>;
+ bank-name = "A";
+ };
+
+ gpiob {
+ compatible = "intel,ich6-gpio";
+ u-boot,dm-pre-reloc;
+ reg = <0x20 0x20>;
+ bank-name = "B";
+ };
+
+ serial {
+ reg = <0x3f8 8>;
+ clock-frequency = <115200>;
+ };
+
+ chosen { };
+ memory { device_type = "memory"; reg = <0 0>; };
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "intel,ich7";
+ spi-flash@0 {
+ reg = <0>;
+ compatible = "sst,25vf016b", "spi-flash";
+ memory-map = <0xffe00000 0x00200000>;
+ };
+ };
+};
diff --git a/arch/x86/include/asm/arch-coreboot/gpio.h b/arch/x86/include/asm/arch-coreboot/gpio.h
index 4951a8c..31edef9 100644
--- a/arch/x86/include/asm/arch-coreboot/gpio.h
+++ b/arch/x86/include/asm/arch-coreboot/gpio.h
@@ -7,4 +7,7 @@
#ifndef _X86_ARCH_GPIO_H_
#define _X86_ARCH_GPIO_H_
+/* Where in config space is the register that points to the GPIO registers? */
+#define PCI_CFG_GPIOBASE 0x48
+
#endif /* _X86_ARCH_GPIO_H_ */
diff --git a/arch/x86/include/asm/arch-coreboot/sysinfo.h b/arch/x86/include/asm/arch-coreboot/sysinfo.h
index 8e4a61d..832c50a 100644
--- a/arch/x86/include/asm/arch-coreboot/sysinfo.h
+++ b/arch/x86/include/asm/arch-coreboot/sysinfo.h
@@ -10,7 +10,7 @@
#define _COREBOOT_SYSINFO_H
#include <common.h>
-#include <compiler.h>
+#include <linux/compiler.h>
#include <libfdt.h>
#include <asm/arch/tables.h>
diff --git a/arch/x86/include/asm/arch-coreboot/tables.h b/arch/x86/include/asm/arch-coreboot/tables.h
index 0d02fe0..e254484 100644
--- a/arch/x86/include/asm/arch-coreboot/tables.h
+++ b/arch/x86/include/asm/arch-coreboot/tables.h
@@ -9,7 +9,7 @@
#ifndef _COREBOOT_TABLES_H
#define _COREBOOT_TABLES_H
-#include <compiler.h>
+#include <linux/compiler.h>
struct cbuint64 {
u32 lo;
diff --git a/arch/x86/include/asm/arch-ivybridge/gpio.h b/arch/x86/include/asm/arch-ivybridge/gpio.h
index 4951a8c..31edef9 100644
--- a/arch/x86/include/asm/arch-ivybridge/gpio.h
+++ b/arch/x86/include/asm/arch-ivybridge/gpio.h
@@ -7,4 +7,7 @@
#ifndef _X86_ARCH_GPIO_H_
#define _X86_ARCH_GPIO_H_
+/* Where in config space is the register that points to the GPIO registers? */
+#define PCI_CFG_GPIOBASE 0x48
+
#endif /* _X86_ARCH_GPIO_H_ */
diff --git a/arch/x86/include/asm/arch-ivybridge/pei_data.h b/arch/x86/include/asm/arch-ivybridge/pei_data.h
index 5026c8b..9453336 100644
--- a/arch/x86/include/asm/arch-ivybridge/pei_data.h
+++ b/arch/x86/include/asm/arch-ivybridge/pei_data.h
@@ -7,6 +7,8 @@
#ifndef ASM_ARCH_PEI_DATA_H
#define ASM_ARCH_PEI_DATA_H
+#include <linux/linkage.h>
+
struct pch_usb3_controller_settings {
/* 0: Disable, 1: Enable, 2: Auto, 3: Smart Auto */
uint16_t mode;
diff --git a/arch/x86/include/asm/arch-queensbay/fsp/fsp_api.h b/arch/x86/include/asm/arch-queensbay/fsp/fsp_api.h
new file mode 100644
index 0000000..25b938f
--- /dev/null
+++ b/arch/x86/include/asm/arch-queensbay/fsp/fsp_api.h
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2013, Intel Corporation
+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier: Intel
+ */
+
+#ifndef __FSP_API_H__
+#define __FSP_API_H__
+
+/*
+ * FspInit continuation function prototype.
+ * Control will be returned to this callback function after FspInit API call.
+ */
+typedef void (*fsp_continuation_f)(u32 status, void *hob_list);
+
+#pragma pack(1)
+
+struct fsp_init_params_t {
+ /* Non-volatile storage buffer pointer */
+ void *nvs_buf;
+ /* Runtime buffer pointer */
+ void *rt_buf;
+ /* Continuation function address */
+ fsp_continuation_f continuation;
+};
+
+struct common_buf_t {
+ /*
+ * Stack top pointer used by the bootloader. The new stack frame will be
+ * set up at this location after FspInit API call.
+ */
+ u32 *stack_top;
+ u32 boot_mode; /* Current system boot mode */
+ void *upd_data; /* User platform configuraiton data region */
+ u32 reserved[7]; /* Reserved */
+};
+
+enum fsp_phase_t {
+ /* Notification code for post PCI enuermation */
+ INIT_PHASE_PCI = 0x20,
+ /* Notification code before transfering control to the payload */
+ INIT_PHASE_BOOT = 0x40
+};
+
+struct fsp_notify_params_t {
+ /* Notification phase used for NotifyPhase API */
+ enum fsp_phase_t phase;
+};
+
+#pragma pack()
+
+/* FspInit API function prototype */
+typedef u32 (*fsp_init_f)(struct fsp_init_params_t *param);
+
+/* FspNotify API function prototype */
+typedef u32 (*fsp_notify_f)(struct fsp_notify_params_t *param);
+
+#endif
diff --git a/arch/x86/include/asm/arch-queensbay/fsp/fsp_bootmode.h b/arch/x86/include/asm/arch-queensbay/fsp/fsp_bootmode.h
new file mode 100644
index 0000000..c3f8b49
--- /dev/null
+++ b/arch/x86/include/asm/arch-queensbay/fsp/fsp_bootmode.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright (C) 2013, Intel Corporation
+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier: Intel
+ */
+
+#ifndef __FSP_BOOT_MODE_H__
+#define __FSP_BOOT_MODE_H__
+
+/* 0x21 - 0xf..f are reserved */
+#define BOOT_FULL_CONFIG 0x00
+#define BOOT_MINIMAL_CONFIG 0x01
+#define BOOT_NO_CONFIG_CHANGES 0x02
+#define BOOT_FULL_CONFIG_PLUS_DIAG 0x03
+#define BOOT_DEFAULT_SETTINGS 0x04
+#define BOOT_ON_S4_RESUME 0x05
+#define BOOT_ON_S5_RESUME 0x06
+#define BOOT_ON_S2_RESUME 0x10
+#define BOOT_ON_S3_RESUME 0x11
+#define BOOT_ON_FLASH_UPDATE 0x12
+#define BOOT_IN_RECOVERY_MODE 0x20
+
+#endif
diff --git a/arch/x86/include/asm/arch-queensbay/fsp/fsp_ffs.h b/arch/x86/include/asm/arch-queensbay/fsp/fsp_ffs.h
new file mode 100644
index 0000000..1f73680
--- /dev/null
+++ b/arch/x86/include/asm/arch-queensbay/fsp/fsp_ffs.h
@@ -0,0 +1,158 @@
+/*
+ * Copyright (C) 2013, Intel Corporation
+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier: Intel
+ */
+
+#ifndef __FSP_FFS_H__
+#define __FSP_FFS_H__
+
+#pragma pack(1)
+
+/* Used to verify the integrity of the file */
+union ffs_integrity_t {
+ struct {
+ /*
+ * The IntegrityCheck.checksum.header field is an 8-bit
+ * checksum of the file header. The State and
+ * IntegrityCheck.checksum.file fields are assumed to be zero
+ * and the checksum is calculated such that the entire header
+ * sums to zero.
+ */
+ u8 header;
+ /*
+ * If the FFS_ATTRIB_CHECKSUM (see definition below) bit of
+ * the Attributes field is set to one, the
+ * IntegrityCheck.checksum.file field is an 8-bit checksum of
+ * the file data. If the FFS_ATTRIB_CHECKSUM bit of the
+ * Attributes field is cleared to zero, the
+ * IntegrityCheck.checksum.file field must be initialized with
+ * a value of 0xAA. The IntegrityCheck.checksum.file field is
+ * valid any time the EFI_FILE_DATA_VALID bit is set in the
+ * State field.
+ */
+ u8 file;
+ } checksum;
+
+ /* This is the full 16 bits of the IntegrityCheck field */
+ u16 checksum16;
+};
+
+/*
+ * Each file begins with the header that describe the
+ * contents and state of the files.
+ */
+struct ffs_file_header_t {
+ /*
+ * This GUID is the file name.
+ * It is used to uniquely identify the file.
+ */
+ struct efi_guid_t name;
+ /* Used to verify the integrity of the file */
+ union ffs_integrity_t integrity;
+ /* Identifies the type of file */
+ u8 type;
+ /* Declares various file attribute bits */
+ u8 attr;
+ /* The length of the file in bytes, including the FFS header */
+ u8 size[3];
+ /*
+ * Used to track the state of the file throughout the life of
+ * the file from creation to deletion.
+ */
+ u8 state;
+};
+
+struct ffs_file_header2_t {
+ /*
+ * This GUID is the file name. It is used to uniquely identify the file.
+ * There may be only one instance of a file with the file name GUID of
+ * Name in any given firmware volume, except if the file type is
+ * EFI_FV_FILE_TYPE_FFS_PAD.
+ */
+ struct efi_guid_t name;
+ /* Used to verify the integrity of the file */
+ union ffs_integrity_t integrity;
+ /* Identifies the type of file */
+ u8 type;
+ /* Declares various file attribute bits */
+ u8 attr;
+ /*
+ * The length of the file in bytes, including the FFS header.
+ * The length of the file data is either
+ * (size - sizeof(struct ffs_file_header_t)). This calculation means a
+ * zero-length file has a size of 24 bytes, which is
+ * sizeof(struct ffs_file_header_t). Size is not required to be a
+ * multiple of 8 bytes. Given a file F, the next file header is located
+ * at the next 8-byte aligned firmware volume offset following the last
+ * byte of the file F.
+ */
+ u8 size[3];
+ /*
+ * Used to track the state of the file throughout the life of
+ * the file from creation to deletion.
+ */
+ u8 state;
+ /*
+ * If FFS_ATTRIB_LARGE_FILE is set in attr, then ext_size exists
+ * and size must be set to zero.
+ * If FFS_ATTRIB_LARGE_FILE is not set then
+ * struct ffs_file_header_t is used.
+ */
+ u32 ext_size;
+};
+
+/*
+ * Pseudo type. It is used as a wild card when retrieving sections.
+ * The section type EFI_SECTION_ALL matches all section types.
+ */
+#define EFI_SECTION_ALL 0x00
+
+/* Encapsulation section Type values */
+#define EFI_SECTION_COMPRESSION 0x01
+#define EFI_SECTION_GUID_DEFINED 0x02
+#define EFI_SECTION_DISPOSABLE 0x03
+
+/* Leaf section Type values */
+#define EFI_SECTION_PE32 0x10
+#define EFI_SECTION_PIC 0x11
+#define EFI_SECTION_TE 0x12
+#define EFI_SECTION_DXE_DEPEX 0x13
+#define EFI_SECTION_VERSION 0x14
+#define EFI_SECTION_USER_INTERFACE 0x15
+#define EFI_SECTION_COMPATIBILITY16 0x16
+#define EFI_SECTION_FIRMWARE_VOLUME_IMAGE 0x17
+#define EFI_SECTION_FREEFORM_SUBTYPE_GUID 0x18
+#define EFI_SECTION_RAW 0x19
+#define EFI_SECTION_PEI_DEPEX 0x1B
+#define EFI_SECTION_SMM_DEPEX 0x1C
+
+/* Common section header */
+struct raw_section_t {
+ /*
+ * A 24-bit unsigned integer that contains the total size of
+ * the section in bytes, including the EFI_COMMON_SECTION_HEADER.
+ */
+ u8 size[3];
+ u8 type;
+};
+
+struct raw_section2_t {
+ /*
+ * A 24-bit unsigned integer that contains the total size of
+ * the section in bytes, including the EFI_COMMON_SECTION_HEADER.
+ */
+ u8 size[3];
+ u8 type;
+ /*
+ * If size is 0xFFFFFF, then ext_size contains the size of
+ * the section. If size is not equal to 0xFFFFFF, then this
+ * field does not exist.
+ */
+ u32 ext_size;
+};
+
+#pragma pack()
+
+#endif
diff --git a/arch/x86/include/asm/arch-queensbay/fsp/fsp_fv.h b/arch/x86/include/asm/arch-queensbay/fsp/fsp_fv.h
new file mode 100644
index 0000000..01300db
--- /dev/null
+++ b/arch/x86/include/asm/arch-queensbay/fsp/fsp_fv.h
@@ -0,0 +1,137 @@
+/*
+ * Copyright (C) 2013, Intel Corporation
+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier: Intel
+ */
+
+#ifndef __FSP_FV___
+#define __FSP_FV___
+
+/* Value of EFI_FV_FILE_ATTRIBUTES */
+#define EFI_FV_FILE_ATTR_ALIGNMENT 0x0000001F
+#define EFI_FV_FILE_ATTR_FIXED 0x00000100
+#define EFI_FV_FILE_ATTR_MEMORY_MAPPED 0x00000200
+
+/* Attributes bit definitions */
+#define EFI_FVB2_READ_DISABLED_CAP 0x00000001
+#define EFI_FVB2_READ_ENABLED_CAP 0x00000002
+#define EFI_FVB2_READ_STATUS 0x00000004
+#define EFI_FVB2_WRITE_DISABLED_CAP 0x00000008
+#define EFI_FVB2_WRITE_ENABLED_CAP 0x00000010
+#define EFI_FVB2_WRITE_STATUS 0x00000020
+#define EFI_FVB2_LOCK_CAP 0x00000040
+#define EFI_FVB2_LOCK_STATUS 0x00000080
+#define EFI_FVB2_STICKY_WRITE 0x00000200
+#define EFI_FVB2_MEMORY_MAPPED 0x00000400
+#define EFI_FVB2_ERASE_POLARITY 0x00000800
+#define EFI_FVB2_READ_LOCK_CAP 0x00001000
+#define EFI_FVB2_READ_LOCK_STATUS 0x00002000
+#define EFI_FVB2_WRITE_LOCK_CAP 0x00004000
+#define EFI_FVB2_WRITE_LOCK_STATUS 0x00008000
+#define EFI_FVB2_ALIGNMENT 0x001F0000
+#define EFI_FVB2_ALIGNMENT_1 0x00000000
+#define EFI_FVB2_ALIGNMENT_2 0x00010000
+#define EFI_FVB2_ALIGNMENT_4 0x00020000
+#define EFI_FVB2_ALIGNMENT_8 0x00030000
+#define EFI_FVB2_ALIGNMENT_16 0x00040000
+#define EFI_FVB2_ALIGNMENT_32 0x00050000
+#define EFI_FVB2_ALIGNMENT_64 0x00060000
+#define EFI_FVB2_ALIGNMENT_128 0x00070000
+#define EFI_FVB2_ALIGNMENT_256 0x00080000
+#define EFI_FVB2_ALIGNMENT_512 0x00090000
+#define EFI_FVB2_ALIGNMENT_1K 0x000A0000
+#define EFI_FVB2_ALIGNMENT_2K 0x000B0000
+#define EFI_FVB2_ALIGNMENT_4K 0x000C0000
+#define EFI_FVB2_ALIGNMENT_8K 0x000D0000
+#define EFI_FVB2_ALIGNMENT_16K 0x000E0000
+#define EFI_FVB2_ALIGNMENT_32K 0x000F0000
+#define EFI_FVB2_ALIGNMENT_64K 0x00100000
+#define EFI_FVB2_ALIGNMENT_128K 0x00110000
+#define EFI_FVB2_ALIGNMENT_256K 0x00120000
+#define EFI_FVB2_ALIGNMENT_512K 0x00130000
+#define EFI_FVB2_ALIGNMENT_1M 0x00140000
+#define EFI_FVB2_ALIGNMENT_2M 0x00150000
+#define EFI_FVB2_ALIGNMENT_4M 0x00160000
+#define EFI_FVB2_ALIGNMENT_8M 0x00170000
+#define EFI_FVB2_ALIGNMENT_16M 0x00180000
+#define EFI_FVB2_ALIGNMENT_32M 0x00190000
+#define EFI_FVB2_ALIGNMENT_64M 0x001A0000
+#define EFI_FVB2_ALIGNMENT_128M 0x001B0000
+#define EFI_FVB2_ALIGNMENT_256M 0x001C0000
+#define EFI_FVB2_ALIGNMENT_512M 0x001D0000
+#define EFI_FVB2_ALIGNMENT_1G 0x001E0000
+#define EFI_FVB2_ALIGNMENT_2G 0x001F0000
+
+struct fv_blkmap_entry_t {
+ /* The number of sequential blocks which are of the same size */
+ u32 num_blocks;
+ /* The size of the blocks */
+ u32 length;
+};
+
+/* Describes the features and layout of the firmware volume */
+struct fv_header_t {
+ /*
+ * The first 16 bytes are reserved to allow for the reset vector of
+ * processors whose reset vector is at address 0.
+ */
+ u8 zero_vec[16];
+ /*
+ * Declares the file system with which the firmware volume
+ * is formatted.
+ */
+ struct efi_guid_t fs_guid;
+ /*
+ * Length in bytes of the complete firmware volume, including
+ * the header.
+ */
+ u64 fv_len;
+ /* Set to EFI_FVH_SIGNATURE */
+ u32 sign;
+ /*
+ * Declares capabilities and power-on defaults for the firmware
+ * volume.
+ */
+ u32 attr;
+ /* Length in bytes of the complete firmware volume header */
+ u16 hdr_len;
+ /*
+ * A 16-bit checksum of the firmware volume header.
+ * A valid header sums to zero.
+ */
+ u16 checksum;
+ /*
+ * Offset, relative to the start of the header, of the extended
+ * header (EFI_FIRMWARE_VOLUME_EXT_HEADER) or zero if there is
+ * no extended header.
+ */
+ u16 ext_hdr_off;
+ /* This field must always be set to zero */
+ u8 reserved[1];
+ /*
+ * Set to 2. Future versions of this specification may define new
+ * header fields and will increment the Revision field accordingly.
+ */
+ u8 rev;
+ /*
+ * An array of run-length encoded FvBlockMapEntry structures.
+ * The array is terminated with an entry of {0,0}.
+ */
+ struct fv_blkmap_entry_t block_map[1];
+};
+
+#define EFI_FVH_SIGNATURE SIGNATURE_32('_', 'F', 'V', 'H')
+
+/* Firmware Volume Header Revision definition */
+#define EFI_FVH_REVISION 0x02
+
+/* Extension header pointed by ExtHeaderOffset of volume header */
+struct fv_ext_header_t {
+ /* firmware volume name */
+ struct efi_guid_t fv_name;
+ /* Size of the rest of the extension header including this structure */
+ u32 ext_hdr_size;
+};
+
+#endif
diff --git a/arch/x86/include/asm/arch-queensbay/fsp/fsp_hob.h b/arch/x86/include/asm/arch-queensbay/fsp/fsp_hob.h
new file mode 100644
index 0000000..44c0f90
--- /dev/null
+++ b/arch/x86/include/asm/arch-queensbay/fsp/fsp_hob.h
@@ -0,0 +1,310 @@
+/*
+ * Copyright (C) 2013, Intel Corporation
+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier: Intel
+ */
+
+#ifndef __FSP_HOB_H__
+#define __FSP_HOB_H__
+
+/* Type of HOB Header */
+#define HOB_TYPE_MEM_ALLOC 0x0002
+#define HOB_TYPE_RES_DESC 0x0003
+#define HOB_TYPE_GUID_EXT 0x0004
+#define HOB_TYPE_UNUSED 0xFFFE
+#define HOB_TYPE_EOH 0xFFFF
+
+/*
+ * Describes the format and size of the data inside the HOB.
+ * All HOBs must contain this generic HOB header.
+ */
+struct hob_header_t {
+ u16 type; /* HOB type */
+ u16 len; /* HOB length */
+ u32 reserved; /* always zero */
+};
+
+/* Enumeration of memory types introduced in UEFI */
+enum efi_mem_type_t {
+ EFI_RESERVED_MEMORY_TYPE,
+ /*
+ * The code portions of a loaded application.
+ * (Note that UEFI OS loaders are UEFI applications.)
+ */
+ EFI_LOADER_CODE,
+ /*
+ * The data portions of a loaded application and
+ * the default data allocation type used by an application
+ * to allocate pool memory.
+ */
+ EFI_LOADER_DATA,
+ /* The code portions of a loaded Boot Services Driver */
+ EFI_BOOT_SERVICES_CODE,
+ /*
+ * The data portions of a loaded Boot Serves Driver and
+ * the default data allocation type used by a Boot Services
+ * Driver to allocate pool memory.
+ */
+ EFI_BOOT_SERVICES_DATA,
+ /* The code portions of a loaded Runtime Services Driver */
+ EFI_RUNTIME_SERVICES_CODE,
+ /*
+ * The data portions of a loaded Runtime Services Driver and
+ * the default data allocation type used by a Runtime Services
+ * Driver to allocate pool memory.
+ */
+ EFI_RUNTIME_SERVICES_DATA,
+ /* Free (unallocated) memory */
+ EFI_CONVENTIONAL_MEMORY,
+ /* Memory in which errors have been detected */
+ EFI_UNUSABLE_MEMORY,
+ /* Memory that holds the ACPI tables */
+ EFI_ACPI_RECLAIM_MEMORY,
+ /* Address space reserved for use by the firmware */
+ EFI_ACPI_MEMORY_NVS,
+ /*
+ * Used by system firmware to request that a memory-mapped IO region
+ * be mapped by the OS to a virtual address so it can be accessed by
+ * EFI runtime services.
+ */
+ EFI_MMAP_IO,
+ /*
+ * System memory-mapped IO region that is used to translate
+ * memory cycles to IO cycles by the processor.
+ */
+ EFI_MMAP_IO_PORT,
+ /*
+ * Address space reserved by the firmware for code that is
+ * part of the processor.
+ */
+ EFI_PAL_CODE,
+ EFI_MAX_MEMORY_TYPE
+};
+
+/*
+ * Describes all memory ranges used during the HOB producer phase that
+ * exist outside the HOB list. This HOB type describes how memory is used,
+ * not the physical attributes of memory.
+ */
+struct hob_mem_alloc_t {
+ struct hob_header_t hdr;
+ /*
+ * A GUID that defines the memory allocation region's type and purpose,
+ * as well as other fields within the memory allocation HOB. This GUID
+ * is used to define the additional data within the HOB that may be
+ * present for the memory allocation HOB. Type efi_guid_t is defined in
+ * InstallProtocolInterface() in the UEFI 2.0 specification.
+ */
+ struct efi_guid_t name;
+ /*
+ * The base address of memory allocated by this HOB.
+ * Type phys_addr_t is defined in AllocatePages() in the UEFI 2.0
+ * specification.
+ */
+ phys_addr_t mem_base;
+ /* The length in bytes of memory allocated by this HOB */
+ phys_size_t mem_len;
+ /*
+ * Defines the type of memory allocated by this HOB.
+ * The memory type definition follows the EFI_MEMORY_TYPE definition.
+ * Type EFI_MEMORY_TYPE is defined in AllocatePages() in the UEFI 2.0
+ * specification.
+ */
+ enum efi_mem_type_t mem_type;
+ /* padding */
+ u8 reserved[4];
+};
+
+/* Value of ResourceType in HOB_RES_DESC */
+#define RES_SYS_MEM 0x00000000
+#define RES_MMAP_IO 0x00000001
+#define RES_IO 0x00000002
+#define RES_FW_DEVICE 0x00000003
+#define RES_MMAP_IO_PORT 0x00000004
+#define RES_MEM_RESERVED 0x00000005
+#define RES_IO_RESERVED 0x00000006
+#define RES_MAX_MEM_TYPE 0x00000007
+
+/*
+ * These types can be ORed together as needed.
+ *
+ * The first three enumerations describe settings
+ * The rest of the settings describe capabilities
+ */
+#define RES_ATTR_PRESENT 0x00000001
+#define RES_ATTR_INITIALIZED 0x00000002
+#define RES_ATTR_TESTED 0x00000004
+#define RES_ATTR_SINGLE_BIT_ECC 0x00000008
+#define RES_ATTR_MULTIPLE_BIT_ECC 0x00000010
+#define RES_ATTR_ECC_RESERVED_1 0x00000020
+#define RES_ATTR_ECC_RESERVED_2 0x00000040
+#define RES_ATTR_READ_PROTECTED 0x00000080
+#define RES_ATTR_WRITE_PROTECTED 0x00000100
+#define RES_ATTR_EXECUTION_PROTECTED 0x00000200
+#define RES_ATTR_UNCACHEABLE 0x00000400
+#define RES_ATTR_WRITE_COMBINEABLE 0x00000800
+#define RES_ATTR_WRITE_THROUGH_CACHEABLE 0x00001000
+#define RES_ATTR_WRITE_BACK_CACHEABLE 0x00002000
+#define RES_ATTR_16_BIT_IO 0x00004000
+#define RES_ATTR_32_BIT_IO 0x00008000
+#define RES_ATTR_64_BIT_IO 0x00010000
+#define RES_ATTR_UNCACHED_EXPORTED 0x00020000
+
+/*
+ * Describes the resource properties of all fixed, nonrelocatable resource
+ * ranges found on the processor host bus during the HOB producer phase.
+ */
+struct hob_res_desc_t {
+ struct hob_header_t hdr;
+ /*
+ * A GUID representing the owner of the resource. This GUID is
+ * used by HOB consumer phase components to correlate device
+ * ownership of a resource.
+ */
+ struct efi_guid_t owner;
+ u32 type;
+ u32 attr;
+ /* The physical start address of the resource region */
+ phys_addr_t phys_start;
+ /* The number of bytes of the resource region */
+ phys_size_t len;
+};
+
+/*
+ * Allows writers of executable content in the HOB producer phase to
+ * maintain and manage HOBs with specific GUID.
+ */
+struct hob_guid_t {
+ struct hob_header_t hdr;
+ /* A GUID that defines the contents of this HOB */
+ struct efi_guid_t name;
+ /* GUID specific data goes here */
+};
+
+/* Union of all the possible HOB Types */
+union hob_pointers_t {
+ struct hob_header_t *hdr;
+ struct hob_mem_alloc_t *mem_alloc;
+ struct hob_res_desc_t *res_desc;
+ struct hob_guid_t *guid;
+ u8 *raw;
+};
+
+/**
+ * Returns the type of a HOB.
+ *
+ * This macro returns the type field from the HOB header for the
+ * HOB specified by hob.
+ *
+ * @hob: A pointer to a HOB.
+ *
+ * @return: HOB type.
+ */
+#define GET_HOB_TYPE(hob) \
+ ((*(struct hob_header_t **)&(hob))->type)
+
+/**
+ * Returns the length, in bytes, of a HOB.
+ *
+ * This macro returns the len field from the HOB header for the
+ * HOB specified by hob.
+ *
+ * @hob: A pointer to a HOB.
+ *
+ * @return: HOB length.
+ */
+#define GET_HOB_LENGTH(hob) \
+ ((*(struct hob_header_t **)&(hob))->len)
+
+/**
+ * Returns a pointer to the next HOB in the HOB list.
+ *
+ * This macro returns a pointer to HOB that follows the HOB specified by hob
+ * in the HOB List.
+ *
+ * @hob: A pointer to a HOB.
+ *
+ * @return: A pointer to the next HOB in the HOB list.
+ */
+#define GET_NEXT_HOB(hob) \
+ (void *)(*(u8 **)&(hob) + GET_HOB_LENGTH(hob))
+
+/**
+ * Determines if a HOB is the last HOB in the HOB list.
+ *
+ * This macro determine if the HOB specified by hob is the last HOB in the
+ * HOB list. If hob is last HOB in the HOB list, then TRUE is returned.
+ * Otherwise, FALSE is returned.
+ *
+ * @hob: A pointer to a HOB.
+ *
+ * @retval TRUE: The HOB specified by hob is the last HOB in the HOB list.
+ * @retval FALSE: The HOB specified by hob is not the last HOB in the HOB list.
+ */
+#define END_OF_HOB(hob) (GET_HOB_TYPE(hob) == (u16)HOB_TYPE_EOH)
+
+/**
+ * Returns a pointer to data buffer from a HOB of type HOB_TYPE_GUID_EXT.
+ *
+ * This macro returns a pointer to the data buffer in a HOB specified by hob.
+ * hob is assumed to be a HOB of type HOB_TYPE_GUID_EXT.
+ *
+ * @hob: A pointer to a HOB.
+ *
+ * @return: A pointer to the data buffer in a HOB.
+ */
+#define GET_GUID_HOB_DATA(hob) \
+ (void *)(*(u8 **)&(hob) + sizeof(struct hob_guid_t))
+
+/**
+ * Returns the size of the data buffer from a HOB of type HOB_TYPE_GUID_EXT.
+ *
+ * This macro returns the size, in bytes, of the data buffer in a HOB
+ * specified by hob. hob is assumed to be a HOB of type HOB_TYPE_GUID_EXT.
+ *
+ * @hob: A pointer to a HOB.
+ *
+ * @return: The size of the data buffer.
+ */
+#define GET_GUID_HOB_DATA_SIZE(hob) \
+ (u16)(GET_HOB_LENGTH(hob) - sizeof(struct hob_guid_t))
+
+/* FSP specific GUID HOB definitions */
+#define FSP_HEADER_GUID \
+ { \
+ 0x912740be, 0x2284, 0x4734, \
+ {0xb9, 0x71, 0x84, 0xb0, 0x27, 0x35, 0x3f, 0x0c} \
+ }
+
+#define FSP_NON_VOLATILE_STORAGE_HOB_GUID \
+ { \
+ 0x721acf02, 0x4d77, 0x4c2a, \
+ { 0xb3, 0xdc, 0x27, 0xb, 0x7b, 0xa9, 0xe4, 0xb0 } \
+ }
+
+#define FSP_BOOTLOADER_TEMP_MEM_HOB_GUID \
+ { \
+ 0xbbcff46c, 0xc8d3, 0x4113, \
+ { 0x89, 0x85, 0xb9, 0xd4, 0xf3, 0xb3, 0xf6, 0x4e } \
+ }
+
+#define FSP_HOB_RESOURCE_OWNER_FSP_GUID \
+ { \
+ 0x69a79759, 0x1373, 0x4367, \
+ { 0xa6, 0xc4, 0xc7, 0xf5, 0x9e, 0xfd, 0x98, 0x6e } \
+ }
+
+#define FSP_HOB_RESOURCE_OWNER_TSEG_GUID \
+ { \
+ 0xd038747c, 0xd00c, 0x4980, \
+ { 0xb3, 0x19, 0x49, 0x01, 0x99, 0xa4, 0x7d, 0x55 } \
+ }
+
+#define FSP_HOB_RESOURCE_OWNER_GRAPHICS_GUID \
+ { \
+ 0x9c7c3aa7, 0x5332, 0x4917, \
+ { 0x82, 0xb9, 0x56, 0xa5, 0xf3, 0xe6, 0x2a, 0x07 } \
+ }
+
+#endif
diff --git a/arch/x86/include/asm/arch-queensbay/fsp/fsp_infoheader.h b/arch/x86/include/asm/arch-queensbay/fsp/fsp_infoheader.h
new file mode 100644
index 0000000..ad78bcd
--- /dev/null
+++ b/arch/x86/include/asm/arch-queensbay/fsp/fsp_infoheader.h
@@ -0,0 +1,36 @@
+/*
+ * Copyright (C) 2013, Intel Corporation
+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier: Intel
+ */
+
+#ifndef _FSP_HEADER_H_
+#define _FSP_HEADER_H_
+
+#define FSP_HEADER_OFF 0x94 /* Fixed FSP header offset in the FSP image */
+
+#pragma pack(1)
+
+struct fsp_header_t {
+ u32 sign; /* 'FSPH' */
+ u32 hdr_len; /* header length */
+ u8 reserved1[3];
+ u8 hdr_rev; /* header rev */
+ u32 img_rev; /* image rev */
+ char img_id[8]; /* signature string */
+ u32 img_size; /* image size */
+ u32 img_base; /* image base */
+ u32 img_attr; /* image attribute */
+ u32 cfg_region_off; /* configuration region offset */
+ u32 cfg_region_size; /* configuration region size */
+ u32 api_num; /* number of API entries */
+ u32 fsp_tempram_init; /* tempram_init offset */
+ u32 fsp_init; /* fsp_init offset */
+ u32 fsp_notify; /* fsp_notify offset */
+ u32 reserved2;
+};
+
+#pragma pack()
+
+#endif
diff --git a/arch/x86/include/asm/arch-queensbay/fsp/fsp_platform.h b/arch/x86/include/asm/arch-queensbay/fsp/fsp_platform.h
new file mode 100644
index 0000000..a7b6e6b
--- /dev/null
+++ b/arch/x86/include/asm/arch-queensbay/fsp/fsp_platform.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) 2013, Intel Corporation
+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier: Intel
+ */
+
+#ifndef __FSP_PLATFORM_H__
+#define __FSP_PLATFORM_H__
+
+#pragma pack(1)
+
+struct fspinit_rtbuf_t {
+ struct common_buf_t common; /* FSP common runtime data structure */
+};
+
+#pragma pack()
+
+#endif
diff --git a/arch/x86/include/asm/arch-queensbay/fsp/fsp_support.h b/arch/x86/include/asm/arch-queensbay/fsp/fsp_support.h
new file mode 100644
index 0000000..3296a2b
--- /dev/null
+++ b/arch/x86/include/asm/arch-queensbay/fsp/fsp_support.h
@@ -0,0 +1,198 @@
+/*
+ * Copyright (C) 2013, Intel Corporation
+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier: Intel
+ */
+
+#ifndef __FSP_SUPPORT_H__
+#define __FSP_SUPPORT_H__
+
+#include "fsp_types.h"
+#include "fsp_fv.h"
+#include "fsp_ffs.h"
+#include "fsp_api.h"
+#include "fsp_hob.h"
+#include "fsp_platform.h"
+#include "fsp_infoheader.h"
+#include "fsp_bootmode.h"
+#include "fsp_vpd.h"
+
+struct shared_data_t {
+ struct fsp_header_t *fsp_hdr;
+ u32 *stack_top;
+ struct upd_region_t fsp_upd;
+};
+
+void asm_continuation(void);
+
+void fsp_init_done(void *hob_list);
+
+/**
+ * FSP Continuation function
+ *
+ * @shared_data: Shared data base before stack migration
+ * @status: Always 0
+ * @hob_list: HOB list pointer
+ *
+ * @retval: Never returns
+ */
+void fsp_continue(struct shared_data_t *shared_data, u32 status,
+ void *hob_list);
+
+/**
+ * Find FSP header offset in FSP image
+ *
+ * If this function is called before the a stack is established, special care
+ * must be taken. First, it cannot declare any local variable using stack.
+ * Only register variable can be used here. Secondly, some compiler version
+ * will add prolog or epilog code for the C function. If so the function call
+ * may not work before stack is ready. GCC 4.8.1 has been verified to be
+ * working for the following code.
+ *
+ * @retval: the offset of FSP header. If signature is invalid, returns 0.
+ */
+u32 find_fsp_header(void);
+
+/**
+ * FSP initialization wrapper function.
+ *
+ * @stack_top: bootloader stack top address
+ * @boot_mode: boot mode defined in fsp_bootmode.h
+ * @nvs_buf: Non-volatile memory buffer pointer
+ */
+void fsp_init(u32 stack_top, u32 boot_mode, void *nvs_buf);
+
+/**
+ * FSP notification wrapper function
+ *
+ * @fsp_hdr: Pointer to FSP information header
+ * @phase: FSP initialization phase defined in enum fsp_phase_t
+ *
+ * @retval: compatible status code with EFI_STATUS defined in PI spec
+ */
+u32 fsp_notify(struct fsp_header_t *fsp_hdr, u32 phase);
+
+/**
+ * This function retrieves the top of usable low memory.
+ *
+ * @hob_list: A HOB list pointer.
+ *
+ * @retval: Usable low memory top.
+ */
+u32 get_usable_lowmem_top(const void *hob_list);
+
+/**
+ * This function retrieves the top of usable high memory.
+ *
+ * @hob_list: A HOB list pointer.
+ *
+ * @retval: Usable high memory top.
+ */
+u64 get_usable_highmem_top(const void *hob_list);
+
+/**
+ * This function retrieves a special reserved memory region.
+ *
+ * @hob_list: A HOB list pointer.
+ * @len: A pointer to the GUID HOB data buffer length.
+ * If the GUID HOB is located, the length will be updated.
+ * @guid: A pointer to the owner guild.
+ *
+ * @retval: Reserved region start address.
+ * 0 if this region does not exist.
+ */
+u64 get_fsp_reserved_mem_from_guid(const void *hob_list,
+ u64 *len, struct efi_guid_t *guid);
+
+/**
+ * This function retrieves the FSP reserved normal memory.
+ *
+ * @hob_list: A HOB list pointer.
+ * @len: A pointer to the FSP reserved memory length buffer.
+ * If the GUID HOB is located, the length will be updated.
+ * @retval: FSP reserved memory base
+ * 0 if this region does not exist.
+ */
+u32 get_fsp_reserved_mem(const void *hob_list, u32 *len);
+
+/**
+ * This function retrieves the TSEG reserved normal memory.
+ *
+ * @hob_list: A HOB list pointer.
+ * @len: A pointer to the TSEG reserved memory length buffer.
+ * If the GUID HOB is located, the length will be updated.
+ *
+ * @retval NULL: Failed to find the TSEG reserved memory.
+ * @retval others: TSEG reserved memory base.
+ */
+u32 get_tseg_reserved_mem(const void *hob_list, u32 *len);
+
+/**
+ * Returns the next instance of a HOB type from the starting HOB.
+ *
+ * @type: HOB type to search
+ * @hob_list: A pointer to the HOB list
+ *
+ * @retval: A HOB object with matching type; Otherwise NULL.
+ */
+void *get_next_hob(u16 type, const void *hob_list);
+
+/**
+ * Returns the next instance of the matched GUID HOB from the starting HOB.
+ *
+ * @guid: GUID to search
+ * @hob_list: A pointer to the HOB list
+ *
+ * @retval: A HOB object with matching GUID; Otherwise NULL.
+ */
+void *get_next_guid_hob(const struct efi_guid_t *guid, const void *hob_list);
+
+/**
+ * This function retrieves a GUID HOB data buffer and size.
+ *
+ * @hob_list: A HOB list pointer.
+ * @len: A pointer to the GUID HOB data buffer length.
+ * If the GUID HOB is located, the length will be updated.
+ * @guid A pointer to HOB GUID.
+ *
+ * @retval NULL: Failed to find the GUID HOB.
+ * @retval others: GUID HOB data buffer pointer.
+ */
+void *get_guid_hob_data(const void *hob_list, u32 *len,
+ struct efi_guid_t *guid);
+
+/**
+ * This function retrieves FSP Non-volatile Storage HOB buffer and size.
+ *
+ * @hob_list: A HOB list pointer.
+ * @len: A pointer to the NVS data buffer length.
+ * If the HOB is located, the length will be updated.
+ *
+ * @retval NULL: Failed to find the NVS HOB.
+ * @retval others: FSP NVS data buffer pointer.
+ */
+void *get_fsp_nvs_data(const void *hob_list, u32 *len);
+
+/**
+ * This function retrieves Bootloader temporary stack buffer and size.
+ *
+ * @hob_list: A HOB list pointer.
+ * @len: A pointer to the bootloader temporary stack length.
+ * If the HOB is located, the length will be updated.
+ *
+ * @retval NULL: Failed to find the bootloader temporary stack HOB.
+ * @retval others: Bootloader temporary stackbuffer pointer.
+ */
+void *get_bootloader_tmp_mem(const void *hob_list, u32 *len);
+
+/**
+ * This function overrides the default configurations in the UPD data region.
+ *
+ * @fsp_upd: A pointer to the upd_region_t data strcture
+ *
+ * @return: None
+ */
+void update_fsp_upd(struct upd_region_t *fsp_upd);
+
+#endif
diff --git a/arch/x86/include/asm/arch-queensbay/fsp/fsp_types.h b/arch/x86/include/asm/arch-queensbay/fsp/fsp_types.h
new file mode 100644
index 0000000..12ebbfd
--- /dev/null
+++ b/arch/x86/include/asm/arch-queensbay/fsp/fsp_types.h
@@ -0,0 +1,97 @@
+/*
+ * Copyright (C) 2013, Intel Corporation
+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier: Intel
+ */
+
+#ifndef __FSP_TYPES_H__
+#define __FSP_TYPES_H__
+
+/*
+ * Boolean true value. UEFI Specification defines this value to be 1,
+ * but this form is more portable.
+ */
+#define TRUE ((unsigned char)(1 == 1))
+
+/*
+ * Boolean false value. UEFI Specification defines this value to be 0,
+ * but this form is more portable.
+ */
+#define FALSE ((unsigned char)(0 == 1))
+
+/* 128 bit buffer containing a unique identifier value */
+struct efi_guid_t {
+ u32 data1;
+ u16 data2;
+ u16 data3;
+ u8 data4[8];
+};
+
+/**
+ * Returns a 16-bit signature built from 2 ASCII characters.
+ *
+ * This macro returns a 16-bit value built from the two ASCII characters
+ * specified by A and B.
+ *
+ * @A: The first ASCII character.
+ * @B: The second ASCII character.
+ *
+ * @return: A 16-bit value built from the two ASCII characters specified by
+ * A and B.
+ */
+#define SIGNATURE_16(A, B) ((A) | (B << 8))
+
+/**
+ * Returns a 32-bit signature built from 4 ASCII characters.
+ *
+ * This macro returns a 32-bit value built from the four ASCII characters
+ * specified by A, B, C, and D.
+ *
+ * @A: The first ASCII character.
+ * @B: The second ASCII character.
+ * @C: The third ASCII character.
+ * @D: The fourth ASCII character.
+ *
+ * @return: A 32-bit value built from the two ASCII characters specified by
+ * A, B, C and D.
+ */
+#define SIGNATURE_32(A, B, C, D) \
+ (SIGNATURE_16(A, B) | (SIGNATURE_16(C, D) << 16))
+
+/**
+ * Returns a 64-bit signature built from 8 ASCII characters.
+ *
+ * This macro returns a 64-bit value built from the eight ASCII characters
+ * specified by A, B, C, D, E, F, G,and H.
+ *
+ * @A: The first ASCII character.
+ * @B: The second ASCII character.
+ * @C: The third ASCII character.
+ * @D: The fourth ASCII character.
+ * @E: The fifth ASCII character.
+ * @F: The sixth ASCII character.
+ * @G: The seventh ASCII character.
+ * @H: The eighth ASCII character.
+ *
+ * @return: A 64-bit value built from the two ASCII characters specified by
+ * A, B, C, D, E, F, G and H.
+ */
+#define SIGNATURE_64(A, B, C, D, E, F, G, H) \
+ (SIGNATURE_32(A, B, C, D) | ((u64)(SIGNATURE_32(E, F, G, H)) << 32))
+
+/* Assertion for debug */
+#define ASSERT(exp) do { if (!(exp)) for (;;); } while (FALSE)
+
+/*
+ * Define FSP API return status code.
+ * Compatiable with EFI_STATUS defined in PI Spec.
+ */
+#define FSP_SUCCESS 0
+#define FSP_INVALID_PARAM 0x80000002
+#define FSP_UNSUPPORTED 0x80000003
+#define FSP_DEVICE_ERROR 0x80000007
+#define FSP_NOT_FOUND 0x8000000E
+#define FSP_ALREADY_STARTED 0x80000014
+
+#endif
diff --git a/arch/x86/include/asm/arch-queensbay/fsp/fsp_vpd.h b/arch/x86/include/asm/arch-queensbay/fsp/fsp_vpd.h
new file mode 100644
index 0000000..11cc32f
--- /dev/null
+++ b/arch/x86/include/asm/arch-queensbay/fsp/fsp_vpd.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2013, Intel Corporation
+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * This file is automatically generated. Please do NOT modify !!!
+ *
+ * SPDX-License-Identifier: Intel
+ */
+
+#ifndef __VPDHEADER_H__
+#define __VPDHEADER_H__
+
+#pragma pack(1)
+
+struct upd_region_t {
+ u64 sign; /* Offset 0x0000 */
+ u64 reserved; /* Offset 0x0008 */
+ u8 dummy[240]; /* Offset 0x0010 */
+ u8 hda_verb_header[12]; /* Offset 0x0100 */
+ u32 hda_verb_length; /* Offset 0x010C */
+ u8 hda_verb_data0[16]; /* Offset 0x0110 */
+ u8 hda_verb_data1[16]; /* Offset 0x0120 */
+ u8 hda_verb_data2[16]; /* Offset 0x0130 */
+ u8 hda_verb_data3[16]; /* Offset 0x0140 */
+ u8 hda_verb_data4[16]; /* Offset 0x0150 */
+ u8 hda_verb_data5[16]; /* Offset 0x0160 */
+ u8 hda_verb_data6[16]; /* Offset 0x0170 */
+ u8 hda_verb_data7[16]; /* Offset 0x0180 */
+ u8 hda_verb_data8[16]; /* Offset 0x0190 */
+ u8 hda_verb_data9[16]; /* Offset 0x01A0 */
+ u8 hda_verb_data10[16]; /* Offset 0x01B0 */
+ u8 hda_verb_data11[16]; /* Offset 0x01C0 */
+ u8 hda_verb_data12[16]; /* Offset 0x01D0 */
+ u8 hda_verb_data13[16]; /* Offset 0x01E0 */
+ u8 hda_verb_pad[47]; /* Offset 0x01F0 */
+ u16 terminator; /* Offset 0x021F */
+};
+
+#define VPD_IMAGE_ID 0x445056574F4E4E4D /* 'MNNOWVPD' */
+#define VPD_IMAGE_REV 0x00000301
+
+struct vpd_region_t {
+ u64 sign; /* Offset 0x0000 */
+ u32 img_rev; /* Offset 0x0008 */
+ u32 upd_offset; /* Offset 0x000C */
+ u8 unused[16]; /* Offset 0x0010 */
+ u32 fsp_res_memlen; /* Offset 0x0020 */
+ u8 disable_pcie1; /* Offset 0x0024 */
+ u8 disable_pcie2; /* Offset 0x0025 */
+ u8 disable_pcie3; /* Offset 0x0026 */
+ u8 enable_azalia; /* Offset 0x0027 */
+ u8 legacy_seg_decode; /* Offset 0x0028 */
+ u8 pcie_port_ioh; /* Offset 0x0029 */
+};
+
+#pragma pack()
+
+#endif
diff --git a/arch/x86/include/asm/config.h b/arch/x86/include/asm/config.h
index c97d988..ff15828 100644
--- a/arch/x86/include/asm/config.h
+++ b/arch/x86/include/asm/config.h
@@ -10,6 +10,5 @@
#define CONFIG_SYS_GENERIC_BOARD
#define CONFIG_LMB
#define CONFIG_SYS_BOOT_RAMDISK_HIGH
-#define asmlinkage __attribute__((regparm(0)))
#endif
diff --git a/arch/x86/include/asm/global_data.h b/arch/x86/include/asm/global_data.h
index 48bbd1a..03d491a 100644
--- a/arch/x86/include/asm/global_data.h
+++ b/arch/x86/include/asm/global_data.h
@@ -47,6 +47,9 @@ struct arch_global_data {
enum pei_boot_mode_t pei_boot_mode;
const struct pch_gpio_map *gpio_map; /* board GPIO map */
struct memory_info meminfo; /* Memory information */
+#ifdef CONFIG_HAVE_FSP
+ void *hob_list; /* FSP HOB list */
+#endif
};
#endif
diff --git a/arch/x86/include/asm/gpio.h b/arch/x86/include/asm/gpio.h
index 5540d42..1787e52 100644
--- a/arch/x86/include/asm/gpio.h
+++ b/arch/x86/include/asm/gpio.h
@@ -147,6 +147,7 @@ struct pch_gpio_map {
} set3;
};
+void setup_pch_gpios(u32 gpiobase, const struct pch_gpio_map *gpio);
void ich_gpio_set_gpio_map(const struct pch_gpio_map *map);
#endif /* _X86_GPIO_H_ */
diff --git a/arch/x86/include/asm/io.h b/arch/x86/include/asm/io.h
index fcd9aa9..e0b2561 100644
--- a/arch/x86/include/asm/io.h
+++ b/arch/x86/include/asm/io.h
@@ -1,7 +1,7 @@
#ifndef _ASM_IO_H
#define _ASM_IO_H
-#include <compiler.h>
+#include <linux/compiler.h>
/*
* This file contains the definitions for the x86 IO instructions
diff --git a/arch/x86/include/asm/linkage.h b/arch/x86/include/asm/linkage.h
new file mode 100644
index 0000000..bdca72e
--- /dev/null
+++ b/arch/x86/include/asm/linkage.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_X86_LINKAGE_H
+#define _ASM_X86_LINKAGE_H
+
+#define asmlinkage CPP_ASMLINKAGE __attribute__((regparm(0)))
+
+#endif /* _ASM_X86_LINKAGE_H */
diff --git a/arch/x86/include/asm/pnp_def.h b/arch/x86/include/asm/pnp_def.h
new file mode 100644
index 0000000..24b038d
--- /dev/null
+++ b/arch/x86/include/asm/pnp_def.h
@@ -0,0 +1,90 @@
+/*
+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * Adapted from coreboot src/include/device/pnp_def.h
+ * and arch/x86/include/arch/io.h
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _ASM_PNP_DEF_H_
+#define _ASM_PNP_DEF_H_
+
+#include <asm/io.h>
+
+#define PNP_IDX_EN 0x30
+#define PNP_IDX_IO0 0x60
+#define PNP_IDX_IO1 0x62
+#define PNP_IDX_IO2 0x64
+#define PNP_IDX_IO3 0x66
+#define PNP_IDX_IRQ0 0x70
+#define PNP_IDX_IRQ1 0x72
+#define PNP_IDX_DRQ0 0x74
+#define PNP_IDX_DRQ1 0x75
+#define PNP_IDX_MSC0 0xf0
+#define PNP_IDX_MSC1 0xf1
+
+/* Generic functions for pnp devices */
+
+/*
+ * pnp device is a 16-bit integer composed of its i/o port address at high byte
+ * and logic function number at low byte.
+ */
+#define PNP_DEV(PORT, FUNC) (((PORT) << 8) | (FUNC))
+
+static inline void pnp_write_config(uint16_t dev, uint8_t reg, uint8_t value)
+{
+ uint8_t port = dev >> 8;
+
+ outb(reg, port);
+ outb(value, port + 1);
+}
+
+static inline uint8_t pnp_read_config(uint16_t dev, uint8_t reg)
+{
+ uint8_t port = dev >> 8;
+
+ outb(reg, port);
+ return inb(port + 1);
+}
+
+static inline void pnp_set_logical_device(uint16_t dev)
+{
+ uint8_t device = dev & 0xff;
+
+ pnp_write_config(dev, 0x07, device);
+}
+
+static inline void pnp_set_enable(uint16_t dev, int enable)
+{
+ pnp_write_config(dev, PNP_IDX_EN, enable ? 1 : 0);
+}
+
+static inline int pnp_read_enable(uint16_t dev)
+{
+ return !!pnp_read_config(dev, PNP_IDX_EN);
+}
+
+static inline void pnp_set_iobase(uint16_t dev, uint8_t index, uint16_t iobase)
+{
+ pnp_write_config(dev, index + 0, (iobase >> 8) & 0xff);
+ pnp_write_config(dev, index + 1, iobase & 0xff);
+}
+
+static inline uint16_t pnp_read_iobase(uint16_t dev, uint8_t index)
+{
+ return ((uint16_t)(pnp_read_config(dev, index)) << 8) |
+ pnp_read_config(dev, index + 1);
+}
+
+static inline void pnp_set_irq(uint16_t dev, uint8_t index, unsigned irq)
+{
+ pnp_write_config(dev, index, irq);
+}
+
+static inline void pnp_set_drq(uint16_t dev, uint8_t index, unsigned drq)
+{
+ pnp_write_config(dev, index, drq & 0xff);
+}
+
+#endif /* _ASM_PNP_DEF_H_ */
diff --git a/arch/x86/include/asm/post.h b/arch/x86/include/asm/post.h
index 6d2ae5d..f49ce99 100644
--- a/arch/x86/include/asm/post.h
+++ b/arch/x86/include/asm/post.h
@@ -33,6 +33,8 @@
#define POST_LAPIC 0x30
#define POST_RAM_FAILURE 0xea
+#define POST_BIST_FAILURE 0xeb
+#define POST_CAR_FAILURE 0xec
/* Output a post code using al - value must be 0 to 0xff */
#ifdef __ASSEMBLY__
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index 55de788..73262d7 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -10,6 +10,7 @@ obj-y += bios_asm.o
obj-y += bios_interrupts.o
obj-$(CONFIG_CMD_BOOTM) += bootm.o
obj-y += cmd_boot.o
+obj-$(CONFIG_HAVE_FSP) += cmd_hob.o
obj-y += gcc.o
obj-y += init_helpers.o
obj-y += interrupts.o
diff --git a/arch/x86/lib/asm-offsets.c b/arch/x86/lib/asm-offsets.c
index d65c6ab..70ccf1b 100644
--- a/arch/x86/lib/asm-offsets.c
+++ b/arch/x86/lib/asm-offsets.c
@@ -17,6 +17,9 @@
int main(void)
{
- DEFINE(GENERATED_GD_RELOC_OFF, offsetof(gd_t, reloc_off));
+ DEFINE(GD_BIST, offsetof(gd_t, arch.bist));
+#ifdef CONFIG_HAVE_FSP
+ DEFINE(GD_HOB_LIST, offsetof(gd_t, arch.hob_list));
+#endif
return 0;
}
diff --git a/arch/x86/lib/bios.c b/arch/x86/lib/bios.c
index 298fca6..d1f8933 100644
--- a/arch/x86/lib/bios.c
+++ b/arch/x86/lib/bios.c
@@ -9,6 +9,7 @@
#include <common.h>
#include <bios_emul.h>
#include <vbe.h>
+#include <linux/linkage.h>
#include <asm/cache.h>
#include <asm/processor.h>
#include <asm/i8259.h>
diff --git a/arch/x86/lib/bios.h b/arch/x86/lib/bios.h
index 8491b4a..668f4b5 100644
--- a/arch/x86/lib/bios.h
+++ b/arch/x86/lib/bios.h
@@ -10,6 +10,8 @@
#ifndef _X86_LIB_BIOS_H
#define _X86_LIB_BIOS_H
+#include <linux/linkage.h>
+
#define REALMODE_BASE 0x600
#ifdef __ASSEMBLY__
diff --git a/arch/x86/lib/cmd_hob.c b/arch/x86/lib/cmd_hob.c
new file mode 100644
index 0000000..2fdff2b
--- /dev/null
+++ b/arch/x86/lib/cmd_hob.c
@@ -0,0 +1,67 @@
+/*
+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <linux/compiler.h>
+#include <asm/arch/fsp/fsp_support.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static char *hob_type[] = {
+ "reserved",
+ "Hand-off",
+ "Memory Allocation",
+ "Resource Descriptor",
+ "GUID Extension",
+ "Firmware Volumn",
+ "CPU",
+ "Memory Pool",
+ "reserved",
+ "Firmware Volumn 2",
+ "Load PEIM Unused",
+ "UEFI Capsule",
+};
+
+int do_hob(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ union hob_pointers_t hob;
+ u16 type;
+ char *desc;
+ int i = 0;
+
+ hob.raw = (u8 *)gd->arch.hob_list;
+
+ printf("HOB list address: 0x%08x\n\n", (unsigned int)hob.raw);
+
+ printf("No. | Address | Type | Length in Bytes\n");
+ printf("----|----------|---------------------|----------------\n");
+ while (!END_OF_HOB(hob)) {
+ printf("%-3d | %08x | ", i, (unsigned int)hob.raw);
+ type = hob.hdr->type;
+ if (type == HOB_TYPE_UNUSED)
+ desc = "*Unused*";
+ else if (type == HOB_TYPE_EOH)
+ desc = "**END OF HOB**";
+ else if (type >= 0 && type <= ARRAY_SIZE(hob_type))
+ desc = hob_type[type];
+ else
+ desc = "!!!Invalid Type!!!";
+ printf("%-19s | %-15d\n", desc, hob.hdr->len);
+ hob.raw = GET_NEXT_HOB(hob);
+ i++;
+ }
+
+ return 0;
+}
+
+/* -------------------------------------------------------------------- */
+
+U_BOOT_CMD(
+ hob, 1, 1, do_hob,
+ "print FSP Hand-Off Block information",
+ ""
+);
diff --git a/arch/x86/lib/string.c b/arch/x86/lib/string.c
index a1656cc..6c66431 100644
--- a/arch/x86/lib/string.c
+++ b/arch/x86/lib/string.c
@@ -8,9 +8,9 @@
/* From glibc-2.14, sysdeps/i386/memset.c */
-#include <compiler.h>
-#include <asm/string.h>
#include <linux/types.h>
+#include <linux/compiler.h>
+#include <asm/string.h>
typedef uint32_t op_t;
diff --git a/board/aristainetos/aristainetos.c b/board/aristainetos/aristainetos.c
index 06922c0..67ac260 100644
--- a/board/aristainetos/aristainetos.c
+++ b/board/aristainetos/aristainetos.c
@@ -301,7 +301,7 @@ int board_eth_init(bd_t *bis)
/* clear gpr1[14], gpr1[18:17] to select anatop clock */
clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUX_GPR1_FEC_MASK, 0);
- ret = enable_fec_anatop_clock(ENET_50MHz);
+ ret = enable_fec_anatop_clock(ENET_50MHZ);
if (ret)
return ret;
diff --git a/board/avionic-design/common/tamonten-ng.c b/board/avionic-design/common/tamonten-ng.c
index 5870b95..86a0844 100644
--- a/board/avionic-design/common/tamonten-ng.c
+++ b/board/avionic-design/common/tamonten-ng.c
@@ -6,6 +6,7 @@
*/
#include <common.h>
+#include <dm.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/gp_padctrl.h>
#include <asm/arch/gpio.h>
@@ -51,8 +52,15 @@ void gpio_early_init(void)
void pmu_write(uchar reg, uchar data)
{
- i2c_set_bus_num(4); /* PMU is on bus 4 */
- i2c_write(PMU_I2C_ADDRESS, reg, 1, &data, 1);
+ struct udevice *dev;
+ int ret;
+
+ ret = i2c_get_chip_for_busnum(4, PMU_I2C_ADDRESS, &dev);
+ if (ret) {
+ debug("%s: Cannot find PMIC I2C chip\n", __func__);
+ return;
+ }
+ i2c_write(dev, reg, &data, 1);
}
/*
diff --git a/board/comelit/dig297/dig297.c b/board/comelit/dig297/dig297.c
index 2b826df..9d4c41b 100644
--- a/board/comelit/dig297/dig297.c
+++ b/board/comelit/dig297/dig297.c
@@ -133,6 +133,11 @@ int board_mmc_init(bd_t *bis)
{
return omap_mmc_init(0, 0, 0, -1, -1);
}
+
+void board_mmc_power_init(void)
+{
+ twl4030_power_mmc_init(0);
+}
#endif
#ifdef CONFIG_CMD_NET
diff --git a/board/compulab/cm_t35/cm_t35.c b/board/compulab/cm_t35/cm_t35.c
index 886c723..43463d5 100644
--- a/board/compulab/cm_t35/cm_t35.c
+++ b/board/compulab/cm_t35/cm_t35.c
@@ -382,6 +382,13 @@ int board_mmc_init(bd_t *bis)
}
#endif
+#if defined(CONFIG_GENERIC_MMC)
+void board_mmc_power_init(void)
+{
+ twl4030_power_mmc_init(0);
+}
+#endif
+
#ifdef CONFIG_SYS_I2C_OMAP34XX
/*
* Routine: reset_net_chip
diff --git a/board/coreboot/coreboot/coreboot.c b/board/coreboot/coreboot/coreboot.c
index 0240c34..b260f9a 100644
--- a/board/coreboot/coreboot/coreboot.c
+++ b/board/coreboot/coreboot/coreboot.c
@@ -6,6 +6,7 @@
#include <common.h>
#include <cros_ec.h>
+#include <asm/gpio.h>
int arch_early_init_r(void)
{
@@ -14,3 +15,8 @@ int arch_early_init_r(void)
return 0;
}
+
+void setup_pch_gpios(u32 gpiobase, const struct pch_gpio_map *gpio)
+{
+ return;
+}
diff --git a/board/corscience/tricorder/tricorder.c b/board/corscience/tricorder/tricorder.c
index 9e81bf3..0fddf45 100644
--- a/board/corscience/tricorder/tricorder.c
+++ b/board/corscience/tricorder/tricorder.c
@@ -147,6 +147,13 @@ int board_mmc_init(bd_t *bis)
}
#endif
+#if defined(CONFIG_GENERIC_MMC)
+void board_mmc_power_init(void)
+{
+ twl4030_power_mmc_init(0);
+}
+#endif
+
/*
* Routine: get_board_mem_timings
* Description: If we use SPL then there is no x-loader nor config header
diff --git a/board/freescale/b4860qds/b4860qds.c b/board/freescale/b4860qds/b4860qds.c
index bed8f56..6a8fca6 100644
--- a/board/freescale/b4860qds/b4860qds.c
+++ b/board/freescale/b4860qds/b4860qds.c
@@ -19,6 +19,7 @@
#include <asm/fsl_portals.h>
#include <asm/fsl_liodn.h>
#include <fm_eth.h>
+#include <hwconfig.h>
#include "../common/qixis.h"
#include "../common/vsc3316_3308.h"
@@ -333,6 +334,8 @@ int configure_vsc3316_3308(void)
unsigned int num_vsc16_con, num_vsc08_con;
u32 serdes1_prtcl, serdes2_prtcl;
int ret;
+ char buffer[HWCONFIG_BUFFER_SIZE];
+ char *buf = NULL;
serdes1_prtcl = in_be32(&gur->rcwsr[4]) &
FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
@@ -385,15 +388,18 @@ int configure_vsc3316_3308(void)
}
break;
+ case 0x01:
case 0x02:
case 0x04:
case 0x05:
case 0x06:
+ case 0x07:
case 0x08:
case 0x09:
case 0x0A:
case 0x0B:
case 0x0C:
+ case 0x2F:
case 0x30:
case 0x32:
case 0x33:
@@ -487,6 +493,9 @@ int configure_vsc3316_3308(void)
return -1;
}
+ num_vsc08_con = NUM_CON_VSC3308;
+ /* Configure VSC3308 crossbar switch */
+ ret = select_i2c_ch_pca(I2C_CH_VSC3308);
switch (serdes2_prtcl) {
#ifdef CONFIG_PPC_B4420
case 0x9d:
@@ -494,14 +503,11 @@ int configure_vsc3316_3308(void)
case 0x9E:
case 0x9A:
case 0x98:
- case 0xb2:
+ case 0x48:
case 0x49:
case 0x4E:
- case 0x8D:
+ case 0x79:
case 0x7A:
- num_vsc08_con = NUM_CON_VSC3308;
- /* Configure VSC3308 crossbar switch */
- ret = select_i2c_ch_pca(I2C_CH_VSC3308);
if (!ret) {
ret = vsc3308_config(VSC3308_TX_ADDRESS,
vsc08_tx_amc, num_vsc08_con);
@@ -515,6 +521,71 @@ int configure_vsc3316_3308(void)
return ret;
}
break;
+ case 0x80:
+ case 0x81:
+ case 0x82:
+ case 0x83:
+ case 0x84:
+ case 0x85:
+ case 0x86:
+ case 0x87:
+ case 0x88:
+ case 0x89:
+ case 0x8a:
+ case 0x8b:
+ case 0x8c:
+ case 0x8d:
+ case 0x8e:
+ case 0xb1:
+ case 0xb2:
+ if (!ret) {
+ /*
+ * Extract hwconfig from environment since environment
+ * is not setup properly yet
+ */
+ getenv_f("hwconfig", buffer, sizeof(buffer));
+ buf = buffer;
+
+ if (hwconfig_subarg_cmp_f("fsl_b4860_serdes2",
+ "sfp_amc", "sfp", buf)) {
+#ifdef CONFIG_SYS_FSL_B4860QDS_XFI_ERR
+ /* change default VSC3308 for XFI erratum */
+ ret = vsc3308_config_adjust(VSC3308_TX_ADDRESS,
+ vsc08_tx_sfp, num_vsc08_con);
+ if (ret)
+ return ret;
+
+ ret = vsc3308_config_adjust(VSC3308_RX_ADDRESS,
+ vsc08_rx_sfp, num_vsc08_con);
+ if (ret)
+ return ret;
+#else
+ ret = vsc3308_config(VSC3308_TX_ADDRESS,
+ vsc08_tx_sfp, num_vsc08_con);
+ if (ret)
+ return ret;
+
+ ret = vsc3308_config(VSC3308_RX_ADDRESS,
+ vsc08_rx_sfp, num_vsc08_con);
+ if (ret)
+ return ret;
+#endif
+ } else {
+ ret = vsc3308_config(VSC3308_TX_ADDRESS,
+ vsc08_tx_amc, num_vsc08_con);
+ if (ret)
+ return ret;
+
+ ret = vsc3308_config(VSC3308_RX_ADDRESS,
+ vsc08_rx_amc, num_vsc08_con);
+ if (ret)
+ return ret;
+ }
+
+ } else {
+ return ret;
+ }
+ break;
default:
printf("WARNING:VSC crossbars programming not supported for: %x"
" SerDes2 Protocol.\n", serdes2_prtcl);
@@ -730,19 +801,23 @@ int config_serdes1_refclks(void)
* to 122.88MHz
*/
switch (serdes1_prtcl) {
+ case 0x29:
case 0x2A:
case 0x2C:
case 0x2D:
case 0x2E:
+ case 0x01:
case 0x02:
case 0x04:
case 0x05:
case 0x06:
+ case 0x07:
case 0x08:
case 0x09:
case 0x0A:
case 0x0B:
case 0x0C:
+ case 0x2F:
case 0x30:
case 0x32:
case 0x33:
@@ -860,6 +935,8 @@ int config_serdes2_refclks(void)
#endif
case 0x9E:
case 0x9A:
+ /* fallthrough */
+ case 0xb1:
case 0xb2:
debug("Configuring IDT for PCIe SATA for srds_prctl:%x\n",
serdes2_prtcl);
@@ -915,6 +992,14 @@ int board_early_init_r(void)
const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
int flash_esel = find_tlb_idx((void *)flashbase, 1);
int ret;
+ u32 svr = SVR_SOC_VER(get_svr());
+
+ /* Create law for MAPLE only for personalities having MAPLE */
+ if ((svr == SVR_B4860) || (svr == SVR_B4440) ||
+ (svr == SVR_B4420) || (svr == SVR_B4220)) {
+ set_next_law(CONFIG_SYS_MAPLE_MEM_PHYS, LAW_SIZE_16M,
+ LAW_TRGT_IF_MAPLE);
+ }
/*
* Remap Boot flash + PROMJET region to caching-inhibited
diff --git a/board/freescale/b4860qds/eth_b4860qds.c b/board/freescale/b4860qds/eth_b4860qds.c
index 12df9a8..501d4b3 100644
--- a/board/freescale/b4860qds/eth_b4860qds.c
+++ b/board/freescale/b4860qds/eth_b4860qds.c
@@ -112,7 +112,10 @@ static void initialize_lane_to_slot(void)
* Lanes: A,B,C,D: PCI
* Lanes: E,F,G,H: XAUI2
*/
+ case 0xb1:
case 0xb2:
+ case 0x8c:
+ case 0x8d:
/*
* Configuration:
* SERDES: 2
@@ -195,34 +198,34 @@ int board_eth_init(bd_t *bis)
* all SGMII. RGMII is not supported on this board. Setting SGMII 5 and
* 6 to on board SGMII phys
*/
- fm_info_set_phy_address(FM1_DTSEC5, CONFIG_SYS_FM1_DTSEC5_PHY_ADDR);
- fm_info_set_phy_address(FM1_DTSEC6, CONFIG_SYS_FM1_DTSEC6_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC5, CONFIG_SYS_FM1_ONBOARD_PHY1_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC6, CONFIG_SYS_FM1_ONBOARD_PHY2_ADDR);
switch (serdes1_prtcl) {
case 0x29:
case 0x2a:
/* Serdes 1: A-B SGMII, Configuring DTSEC 5 and 6 */
- debug("Setting phy addresses for FM1_DTSEC5: %x and"
- "FM1_DTSEC6: %x\n", CONFIG_SYS_FM1_DTSEC5_PHY_ADDR,
- CONFIG_SYS_FM1_DTSEC6_PHY_ADDR);
+ debug("Set phy addresses for FM1_DTSEC5:%x, FM1_DTSEC6:%x\n",
+ CONFIG_SYS_FM1_ONBOARD_PHY1_ADDR,
+ CONFIG_SYS_FM1_ONBOARD_PHY2_ADDR);
fm_info_set_phy_address(FM1_DTSEC5,
- CONFIG_SYS_FM1_DTSEC5_PHY_ADDR);
+ CONFIG_SYS_FM1_ONBOARD_PHY1_ADDR);
fm_info_set_phy_address(FM1_DTSEC6,
- CONFIG_SYS_FM1_DTSEC6_PHY_ADDR);
+ CONFIG_SYS_FM1_ONBOARD_PHY2_ADDR);
break;
#ifdef CONFIG_PPC_B4420
case 0x17:
case 0x18:
/* Serdes 1: A-D SGMII, Configuring on board dual SGMII Phy */
- debug("Setting phy addresses for FM1_DTSEC3: %x and"
- "FM1_DTSEC4: %x\n", CONFIG_SYS_FM1_DTSEC5_PHY_ADDR,
- CONFIG_SYS_FM1_DTSEC6_PHY_ADDR);
+ debug("Set phy addresses for FM1_DTSEC3:%x, FM1_DTSEC4:%x\n",
+ CONFIG_SYS_FM1_ONBOARD_PHY1_ADDR,
+ CONFIG_SYS_FM1_ONBOARD_PHY2_ADDR);
/* Fixing Serdes clock by programming FPGA register */
QIXIS_WRITE(brdcfg[4], QIXIS_SRDS1CLK_125);
fm_info_set_phy_address(FM1_DTSEC3,
- CONFIG_SYS_FM1_DTSEC5_PHY_ADDR);
+ CONFIG_SYS_FM1_ONBOARD_PHY1_ADDR);
fm_info_set_phy_address(FM1_DTSEC4,
- CONFIG_SYS_FM1_DTSEC6_PHY_ADDR);
+ CONFIG_SYS_FM1_ONBOARD_PHY2_ADDR);
break;
#endif
default:
@@ -233,8 +236,8 @@ int board_eth_init(bd_t *bis)
switch (serdes2_prtcl) {
case 0x17:
case 0x18:
- debug("Setting phy addresses on SGMII Riser card for"
- "FM1_DTSEC ports: \n");
+ debug("Set phy address on SGMII Riser for FM1_DTSEC1:%x\n",
+ CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR);
fm_info_set_phy_address(FM1_DTSEC1,
CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR);
fm_info_set_phy_address(FM1_DTSEC2,
@@ -246,8 +249,8 @@ int board_eth_init(bd_t *bis)
break;
case 0x48:
case 0x49:
- debug("Setting phy addresses on SGMII Riser card for"
- "FM1_DTSEC ports: \n");
+ debug("Set phy address on SGMII Riser for FM1_DTSEC1:%x\n",
+ CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR);
fm_info_set_phy_address(FM1_DTSEC1,
CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR);
fm_info_set_phy_address(FM1_DTSEC2,
@@ -255,29 +258,37 @@ int board_eth_init(bd_t *bis)
fm_info_set_phy_address(FM1_DTSEC3,
CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR);
break;
- case 0x8d:
+ case 0xb1:
case 0xb2:
- debug("Setting phy addresses on SGMII Riser card for"
- "FM1_DTSEC ports: \n");
+ case 0x8c:
+ case 0x8d:
+ debug("Set phy addresses on SGMII Riser for FM1_DTSEC1:%x\n",
+ CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR);
fm_info_set_phy_address(FM1_DTSEC3,
CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR);
fm_info_set_phy_address(FM1_DTSEC4,
CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR);
+ /*
+ * XFI does not need a PHY to work, but to make U-boot
+ * happy, assign a fake PHY address for a XFI port.
+ */
+ fm_info_set_phy_address(FM1_10GEC1, 0);
+ fm_info_set_phy_address(FM1_10GEC2, 1);
break;
case 0x98:
/* XAUI in Slot1 and Slot2 */
- debug("Setting phy addresses on B4860 QDS AMC2PEX-2S for FM1_10GEC1: %x\n",
+ debug("Set phy address of AMC2PEX-2S for FM1_10GEC1:%x\n",
CONFIG_SYS_FM1_10GEC1_PHY_ADDR);
fm_info_set_phy_address(FM1_10GEC1,
CONFIG_SYS_FM1_10GEC1_PHY_ADDR);
- debug("Setting phy addresses on B4860 QDS AMC2PEX-2S for FM1_10GEC2: %x\n",
+ debug("Set phy address of AMC2PEX-2S for FM1_10GEC2:%x\n",
CONFIG_SYS_FM1_10GEC2_PHY_ADDR);
fm_info_set_phy_address(FM1_10GEC2,
CONFIG_SYS_FM1_10GEC2_PHY_ADDR);
break;
case 0x9E:
/* XAUI in Slot2 */
- debug("Setting phy addresses on B4860 QDS AMC2PEX-2S for FM1_10GEC2: %x\n",
+ debug("Sett phy address of AMC2PEX-2S for FM1_10GEC2:%x\n",
CONFIG_SYS_FM1_10GEC2_PHY_ADDR);
fm_info_set_phy_address(FM1_10GEC2,
CONFIG_SYS_FM1_10GEC2_PHY_ADDR);
@@ -329,17 +340,20 @@ int board_eth_init(bd_t *bis)
switch (fm_info_get_enet_if(i)) {
case PHY_INTERFACE_MODE_XGMII:
fm_info_set_mdio(i,
- miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME));
+ miiphy_get_dev_by_name
+ (DEFAULT_FM_TGEC_MDIO_NAME));
+ break;
+ case PHY_INTERFACE_MODE_NONE:
+ fm_info_set_phy_address(i, 0);
break;
default:
- printf("Fman1: 10GSEC%u set to unknown interface %i\n",
+ printf("Fman1: TGEC%u set to unknown interface %i\n",
idx + 1, fm_info_get_enet_if(i));
fm_info_set_phy_address(i, 0);
break;
}
}
-
cpu_eth_init(bis);
#endif
@@ -351,21 +365,82 @@ void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
{
int phy;
char alias[32];
+ struct fixed_link f_link;
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 prtcl2 = in_be32(&gur->rcwsr[4]) & FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
+
+ prtcl2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII) {
phy = fm_info_get_phy_address(port);
sprintf(alias, "phy_sgmii_%x", phy);
fdt_set_phy_handle(fdt, compat, addr, alias);
+ fdt_status_okay_by_alias(fdt, alias);
+ } else if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_XGMII) {
+ /* check if it's XFI interface for 10g */
+ switch (prtcl2) {
+ case 0x80:
+ case 0x81:
+ case 0x82:
+ case 0x83:
+ case 0x84:
+ case 0x85:
+ case 0x86:
+ case 0x87:
+ case 0x88:
+ case 0x89:
+ case 0x8a:
+ case 0x8b:
+ case 0x8c:
+ case 0x8d:
+ case 0x8e:
+ case 0xb1:
+ case 0xb2:
+ f_link.phy_id = port;
+ f_link.duplex = 1;
+ f_link.link_speed = 10000;
+ f_link.pause = 0;
+ f_link.asym_pause = 0;
+
+ fdt_delprop(fdt, offset, "phy-handle");
+ fdt_setprop(fdt, offset, "fixed-link", &f_link,
+ sizeof(f_link));
+ break;
+ case 0x98: /* XAUI interface */
+ sprintf(alias, "phy_xaui_slot1");
+ fdt_status_okay_by_alias(fdt, alias);
+
+ sprintf(alias, "phy_xaui_slot2");
+ fdt_status_okay_by_alias(fdt, alias);
+ break;
+ case 0x9e: /* XAUI interface */
+ case 0x9a:
+ case 0x93:
+ case 0x91:
+ sprintf(alias, "phy_xaui_slot1");
+ fdt_status_okay_by_alias(fdt, alias);
+ break;
+ case 0x97: /* XAUI interface */
+ case 0xc3:
+ sprintf(alias, "phy_xaui_slot2");
+ fdt_status_okay_by_alias(fdt, alias);
+ break;
+ default:
+ break;
+ }
}
}
+/*
+ * Set status to disabled for unused ethernet node
+ */
void fdt_fixup_board_enet(void *fdt)
{
int i;
char alias[32];
- for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
+ for (i = FM1_DTSEC1; i <= FM1_10GEC2; i++) {
switch (fm_info_get_enet_if(i)) {
case PHY_INTERFACE_MODE_NONE:
sprintf(alias, "ethernet%u", i);
diff --git a/board/freescale/b4860qds/law.c b/board/freescale/b4860qds/law.c
index 5b327cc..047c3cb 100644
--- a/board/freescale/b4860qds/law.c
+++ b/board/freescale/b4860qds/law.c
@@ -17,9 +17,6 @@ struct law_entry law_table[] = {
SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN),
#endif
SET_LAW(QIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC),
-#ifdef CONFIG_SYS_MAPLE_MEM_PHYS
- SET_LAW(CONFIG_SYS_MAPLE_MEM_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_MAPLE),
-#endif
#ifdef CONFIG_SYS_DCSRBAR_PHYS
/* Limit DCSR to 32M to access NPC Trace Buffer */
SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_DCSR),
diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile
index 25a1bc1..14af660 100644
--- a/board/freescale/common/Makefile
+++ b/board/freescale/common/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_FMAN_ENET) += fman.o
obj-$(CONFIG_FSL_PIXIS) += pixis.o
ifndef CONFIG_SPL_BUILD
obj-$(CONFIG_FSL_NGPIXIS) += ngpixis.o
+obj-$(CONFIG_VID) += vid.o
endif
obj-$(CONFIG_FSL_QIXIS) += qixis.o
obj-$(CONFIG_PQ_MDS_PIB) += pq-mds-pib.o
@@ -36,6 +37,12 @@ endif
obj-$(CONFIG_FSL_DIU_CH7301) += diu_ch7301.o
+ifdef CONFIG_ARM
+obj-$(CONFIG_DEEP_SLEEP) += arm_sleep.o
+else
+obj-$(CONFIG_DEEP_SLEEP) += mpc85xx_sleep.o
+endif
+
obj-$(CONFIG_FSL_DCU_SII9022A) += dcu_sii9022a.o
obj-$(CONFIG_MPC8541CDS) += cds_pci_ft.o
@@ -55,10 +62,14 @@ obj-$(CONFIG_IDT8T49N222A) += idt8t49n222a_serdes_clk.o
obj-$(CONFIG_ZM7300) += zm7300.o
obj-$(CONFIG_POWER_PFUZE100) += pfuze.o
+obj-$(CONFIG_LS102XA_STREAM_ID) += ls102xa_stream_id.o
+
# deal with common files for P-series corenet based devices
obj-$(CONFIG_P2041RDB) += p_corenet/
obj-$(CONFIG_P3041DS) += p_corenet/
obj-$(CONFIG_P4080DS) += p_corenet/
obj-$(CONFIG_P5020DS) += p_corenet/
obj-$(CONFIG_P5040DS) += p_corenet/
+
+obj-$(CONFIG_LS102XA_NS_ACCESS) += ns_access.o
endif
diff --git a/board/freescale/common/arm_sleep.c b/board/freescale/common/arm_sleep.c
new file mode 100644
index 0000000..8edf878
--- /dev/null
+++ b/board/freescale/common/arm_sleep.c
@@ -0,0 +1,95 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#if !defined(CONFIG_ARMV7_NONSEC) || !defined(CONFIG_ARMV7_VIRT)
+#error " Deep sleep needs non-secure mode support. "
+#else
+#include <asm/secure.h>
+#endif
+#include <asm/armv7.h>
+#include <asm/cache.h>
+
+#if defined(CONFIG_LS102XA)
+#include <asm/arch/immap_ls102xa.h>
+#endif
+
+#include "sleep.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void __weak board_mem_sleep_setup(void)
+{
+}
+
+void __weak board_sleep_prepare(void)
+{
+}
+
+bool is_warm_boot(void)
+{
+ struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
+
+ if (in_be32(&gur->crstsr) & DCFG_CCSR_CRSTSR_WDRFR)
+ return 1;
+
+ return 0;
+}
+
+void fsl_dp_disable_console(void)
+{
+ gd->flags |= GD_FLG_SILENT | GD_FLG_DISABLE_CONSOLE;
+}
+
+/*
+ * When wakeup from deep sleep, the first 128 bytes space
+ * will be used to do DDR training which corrupts the data
+ * in there. This function will restore them.
+ */
+static void dp_ddr_restore(void)
+{
+ u64 *src, *dst;
+ int i;
+ struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
+
+ /* get the address of ddr date from SPARECR3 */
+ src = (u64 *)in_le32(&scfg->sparecr[2]);
+ dst = (u64 *)CONFIG_SYS_SDRAM_BASE;
+
+ for (i = 0; i < DDR_BUFF_LEN / 8; i++)
+ *dst++ = *src++;
+
+ flush_dcache_all();
+}
+
+static void dp_resume_prepare(void)
+{
+ dp_ddr_restore();
+ board_sleep_prepare();
+ armv7_init_nonsec();
+ cleanup_before_linux();
+}
+
+int fsl_dp_resume(void)
+{
+ u32 start_addr;
+ void (*kernel_resume)(void);
+ struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
+
+ if (!is_warm_boot())
+ return 0;
+
+ dp_resume_prepare();
+
+ /* Get the entry address and jump to kernel */
+ start_addr = in_le32(&scfg->sparecr[1]);
+ debug("Entry address is 0x%08x\n", start_addr);
+ kernel_resume = (void (*)(void))start_addr;
+ secure_ram_addr(_do_nonsec_entry)(kernel_resume, 0, 0, 0);
+
+ return 0;
+}
diff --git a/board/freescale/common/ls102xa_stream_id.c b/board/freescale/common/ls102xa_stream_id.c
new file mode 100644
index 0000000..6154c9c
--- /dev/null
+++ b/board/freescale/common/ls102xa_stream_id.c
@@ -0,0 +1,18 @@
+/*
+ * Copyright 2014 Freescale Semiconductor
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/ls102xa_stream_id.h>
+
+void ls102xa_config_smmu_stream_id(struct smmu_stream_id *id, uint32_t num)
+{
+ uint32_t *scfg = (uint32_t *)CONFIG_SYS_FSL_SCFG_ADDR;
+ int i;
+
+ for (i = 0; i < num; i++)
+ out_be32(scfg + id[i].offset, id[i].stream_id);
+}
diff --git a/board/freescale/common/mpc85xx_sleep.c b/board/freescale/common/mpc85xx_sleep.c
new file mode 100644
index 0000000..f924e7f
--- /dev/null
+++ b/board/freescale/common/mpc85xx_sleep.c
@@ -0,0 +1,88 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/immap_85xx.h>
+#include "sleep.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void __weak board_mem_sleep_setup(void)
+{
+}
+
+void __weak board_sleep_prepare(void)
+{
+}
+
+bool is_warm_boot(void)
+{
+ struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+
+ if (in_be32(&gur->scrtsr[0]) & DCFG_CCSR_CRSTSR_WDRFR)
+ return 1;
+
+ return 0;
+}
+
+void fsl_dp_disable_console(void)
+{
+ gd->flags |= GD_FLG_SILENT | GD_FLG_DISABLE_CONSOLE;
+}
+
+/*
+ * When wakeup from deep sleep, the first 128 bytes space
+ * will be used to do DDR training which corrupts the data
+ * in there. This function will restore them.
+ */
+static void dp_ddr_restore(void)
+{
+ volatile u64 *src, *dst;
+ int i;
+ struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_MPC85xx_SCFG;
+
+ /* get the address of ddr date from SPARECR3 */
+ src = (u64 *)in_be32(&scfg->sparecr[2]);
+ dst = (u64 *)CONFIG_SYS_SDRAM_BASE;
+
+ for (i = 0; i < DDR_BUFF_LEN / 8; i++)
+ *dst++ = *src++;
+
+ flush_dcache();
+}
+
+static void dp_resume_prepare(void)
+{
+ dp_ddr_restore();
+
+ board_sleep_prepare();
+
+ l2cache_init();
+#if defined(CONFIG_RAMBOOT_PBL)
+ disable_cpc_sram();
+#endif
+ enable_cpc();
+}
+
+int fsl_dp_resume(void)
+{
+ u32 start_addr;
+ void (*kernel_resume)(void);
+ struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_MPC85xx_SCFG;
+
+ if (!is_warm_boot())
+ return 0;
+
+ dp_resume_prepare();
+
+ /* Get the entry address and jump to kernel */
+ start_addr = in_be32(&scfg->sparecr[1]);
+ debug("Entry address is 0x%08x\n", start_addr);
+ kernel_resume = (void (*)(void))start_addr;
+ kernel_resume();
+
+ return 0;
+}
diff --git a/board/freescale/common/ns_access.c b/board/freescale/common/ns_access.c
new file mode 100644
index 0000000..d7de982
--- /dev/null
+++ b/board/freescale/common/ns_access.c
@@ -0,0 +1,30 @@
+/*
+ * Copyright 2014 Freescale Semiconductor
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/ns_access.h>
+
+void enable_devices_ns_access(struct csu_ns_dev *ns_dev, uint32_t num)
+{
+ u32 *base = (u32 *)CONFIG_SYS_FSL_CSU_ADDR;
+ u32 *reg;
+ uint32_t val;
+ int i;
+
+ for (i = 0; i < num; i++) {
+ reg = base + ns_dev[i].ind / 2;
+ val = in_be32(reg);
+ if (ns_dev[i].ind % 2 == 0) {
+ val &= 0x0000ffff;
+ val |= ns_dev[i].val << 16;
+ } else {
+ val &= 0xffff0000;
+ val |= ns_dev[i].val;
+ }
+ out_be32(reg, val);
+ }
+}
diff --git a/board/freescale/common/qixis.h b/board/freescale/common/qixis.h
index d8fed14..52d2021 100644
--- a/board/freescale/common/qixis.h
+++ b/board/freescale/common/qixis.h
@@ -100,8 +100,15 @@ u8 qixis_read_i2c(unsigned int reg);
void qixis_write_i2c(unsigned int reg, u8 value);
#endif
+#if defined(CONFIG_QIXIS_I2C_ACCESS) && defined(CONFIG_SYS_I2C_FPGA_ADDR)
+#define QIXIS_READ(reg) qixis_read_i2c(offsetof(struct qixis, reg))
+#define QIXIS_WRITE(reg, value) \
+ qixis_write_i2c(offsetof(struct qixis, reg), value)
+#else
#define QIXIS_READ(reg) qixis_read(offsetof(struct qixis, reg))
#define QIXIS_WRITE(reg, value) qixis_write(offsetof(struct qixis, reg), value)
+#endif
+
#ifdef CONFIG_SYS_I2C_FPGA_ADDR
#define QIXIS_READ_I2C(reg) qixis_read_i2c(offsetof(struct qixis, reg))
#define QIXIS_WRITE_I2C(reg, value) \
diff --git a/board/freescale/common/sleep.h b/board/freescale/common/sleep.h
new file mode 100644
index 0000000..c26c542
--- /dev/null
+++ b/board/freescale/common/sleep.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __SLEEP_H
+#define __SLEEP_H
+
+#define DCFG_CCSR_CRSTSR_WDRFR (1 << 3)
+#define DDR_BUFF_LEN 128
+
+/* determine if it is a wakeup from deep sleep */
+bool is_warm_boot(void);
+
+/* disable console output */
+void fsl_dp_disable_console(void);
+
+/* clean up everything and jump to kernel */
+int fsl_dp_resume(void);
+#endif
diff --git a/board/freescale/common/vid.c b/board/freescale/common/vid.c
new file mode 100644
index 0000000..6b8af14
--- /dev/null
+++ b/board/freescale/common/vid.c
@@ -0,0 +1,491 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <i2c.h>
+#include <asm/immap_85xx.h>
+#include "vid.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int __weak i2c_multiplexer_select_vid_channel(u8 channel)
+{
+ return 0;
+}
+
+/*
+ * Compensate for a board specific voltage drop between regulator and SoC
+ * return a value in mV
+ */
+int __weak board_vdd_drop_compensation(void)
+{
+ return 0;
+}
+
+/*
+ * Get the i2c address configuration for the IR regulator chip
+ *
+ * There are some variance in the RDB HW regarding the I2C address configuration
+ * for the IR regulator chip, which is likely a problem of external resistor
+ * accuracy. So we just check each address in a hopefully non-intrusive mode
+ * and use the first one that seems to work
+ *
+ * The IR chip can show up under the following addresses:
+ * 0x08 (Verified on T1040RDB-PA,T4240RDB-PB,X-T4240RDB-16GPA)
+ * 0x09 (Verified on T1040RDB-PA)
+ * 0x38 (Verified on T2080QDS, T2081QDS)
+ */
+static int find_ir_chip_on_i2c(void)
+{
+ int i2caddress;
+ int ret;
+ u8 byte;
+ int i;
+ const int ir_i2c_addr[] = {0x38, 0x08, 0x09};
+
+ /* Check all the address */
+ for (i = 0; i < (sizeof(ir_i2c_addr)/sizeof(ir_i2c_addr[0])); i++) {
+ i2caddress = ir_i2c_addr[i];
+ ret = i2c_read(i2caddress,
+ IR36021_MFR_ID_OFFSET, 1, (void *)&byte,
+ sizeof(byte));
+ if ((ret >= 0) && (byte == IR36021_MFR_ID))
+ return i2caddress;
+ }
+ return -1;
+}
+
+/* Maximum loop count waiting for new voltage to take effect */
+#define MAX_LOOP_WAIT_NEW_VOL 100
+/* Maximum loop count waiting for the voltage to be stable */
+#define MAX_LOOP_WAIT_VOL_STABLE 100
+/*
+ * read_voltage from sensor on I2C bus
+ * We use average of 4 readings, waiting for WAIT_FOR_ADC before
+ * another reading
+ */
+#define NUM_READINGS 4 /* prefer to be power of 2 for efficiency */
+
+/* If an INA220 chip is available, we can use it to read back the voltage
+ * as it may have a higher accuracy than the IR chip for the same purpose
+ */
+#ifdef CONFIG_VOL_MONITOR_INA220
+#define WAIT_FOR_ADC 532 /* wait for 532 microseconds for ADC */
+#define ADC_MIN_ACCURACY 4
+#else
+#define WAIT_FOR_ADC 138 /* wait for 138 microseconds for ADC */
+#define ADC_MIN_ACCURACY 4
+#endif
+
+#ifdef CONFIG_VOL_MONITOR_INA220
+static int read_voltage_from_INA220(int i2caddress)
+{
+ int i, ret, voltage_read = 0;
+ u16 vol_mon;
+ u8 buf[2];
+
+ for (i = 0; i < NUM_READINGS; i++) {
+ ret = i2c_read(I2C_VOL_MONITOR_ADDR,
+ I2C_VOL_MONITOR_BUS_V_OFFSET, 1,
+ (void *)&buf, 2);
+ if (ret) {
+ printf("VID: failed to read core voltage\n");
+ return ret;
+ }
+ vol_mon = (buf[0] << 8) | buf[1];
+ if (vol_mon & I2C_VOL_MONITOR_BUS_V_OVF) {
+ printf("VID: Core voltage sensor error\n");
+ return -1;
+ }
+ debug("VID: bus voltage reads 0x%04x\n", vol_mon);
+ /* LSB = 4mv */
+ voltage_read += (vol_mon >> I2C_VOL_MONITOR_BUS_V_SHIFT) * 4;
+ udelay(WAIT_FOR_ADC);
+ }
+ /* calculate the average */
+ voltage_read /= NUM_READINGS;
+
+ return voltage_read;
+}
+#endif
+
+/* read voltage from IR */
+#ifdef CONFIG_VOL_MONITOR_IR36021_READ
+static int read_voltage_from_IR(int i2caddress)
+{
+ int i, ret, voltage_read = 0;
+ u16 vol_mon;
+ u8 buf;
+
+ for (i = 0; i < NUM_READINGS; i++) {
+ ret = i2c_read(i2caddress,
+ IR36021_LOOP1_VOUT_OFFSET,
+ 1, (void *)&buf, 1);
+ if (ret) {
+ printf("VID: failed to read vcpu\n");
+ return ret;
+ }
+ vol_mon = buf;
+ if (!vol_mon) {
+ printf("VID: Core voltage sensor error\n");
+ return -1;
+ }
+ debug("VID: bus voltage reads 0x%02x\n", vol_mon);
+ /* Resolution is 1/128V. We scale up here to get 1/128mV
+ * and divide at the end
+ */
+ voltage_read += vol_mon * 1000;
+ udelay(WAIT_FOR_ADC);
+ }
+ /* Scale down to the real mV as IR resolution is 1/128V, rounding up */
+ voltage_read = DIV_ROUND_UP(voltage_read, 128);
+
+ /* calculate the average */
+ voltage_read /= NUM_READINGS;
+
+ /* Compensate for a board specific voltage drop between regulator and
+ * SoC before converting into an IR VID value
+ */
+ voltage_read -= board_vdd_drop_compensation();
+
+ return voltage_read;
+}
+#endif
+
+static int read_voltage(int i2caddress)
+{
+ int voltage_read;
+#ifdef CONFIG_VOL_MONITOR_INA220
+ voltage_read = read_voltage_from_INA220(i2caddress);
+#elif defined CONFIG_VOL_MONITOR_IR36021_READ
+ voltage_read = read_voltage_from_IR(i2caddress);
+#else
+ return -1;
+#endif
+ return voltage_read;
+}
+
+/*
+ * We need to calculate how long before the voltage stops to drop
+ * or increase. It returns with the loop count. Each loop takes
+ * several readings (WAIT_FOR_ADC)
+ */
+static int wait_for_new_voltage(int vdd, int i2caddress)
+{
+ int timeout, vdd_current;
+
+ vdd_current = read_voltage(i2caddress);
+ /* wait until voltage starts to reach the target. Voltage slew
+ * rates by typical regulators will always lead to stable readings
+ * within each fairly long ADC interval in comparison to the
+ * intended voltage delta change until the target voltage is
+ * reached. The fairly small voltage delta change to any target
+ * VID voltage also means that this function will always complete
+ * within few iterations. If the timeout was ever reached, it would
+ * point to a serious failure in the regulator system.
+ */
+ for (timeout = 0;
+ abs(vdd - vdd_current) > (IR_VDD_STEP_UP + IR_VDD_STEP_DOWN) &&
+ timeout < MAX_LOOP_WAIT_NEW_VOL; timeout++) {
+ vdd_current = read_voltage(i2caddress);
+ }
+ if (timeout >= MAX_LOOP_WAIT_NEW_VOL) {
+ printf("VID: Voltage adjustment timeout\n");
+ return -1;
+ }
+ return timeout;
+}
+
+/*
+ * this function keeps reading the voltage until it is stable or until the
+ * timeout expires
+ */
+static int wait_for_voltage_stable(int i2caddress)
+{
+ int timeout, vdd_current, vdd;
+
+ vdd = read_voltage(i2caddress);
+ udelay(NUM_READINGS * WAIT_FOR_ADC);
+
+ /* wait until voltage is stable */
+ vdd_current = read_voltage(i2caddress);
+ /* The maximum timeout is
+ * MAX_LOOP_WAIT_VOL_STABLE * NUM_READINGS * WAIT_FOR_ADC
+ */
+ for (timeout = MAX_LOOP_WAIT_VOL_STABLE;
+ abs(vdd - vdd_current) > ADC_MIN_ACCURACY &&
+ timeout > 0; timeout--) {
+ vdd = vdd_current;
+ udelay(NUM_READINGS * WAIT_FOR_ADC);
+ vdd_current = read_voltage(i2caddress);
+ }
+ if (timeout == 0)
+ return -1;
+ return vdd_current;
+}
+
+#ifdef CONFIG_VOL_MONITOR_IR36021_SET
+/* Set the voltage to the IR chip */
+static int set_voltage_to_IR(int i2caddress, int vdd)
+{
+ int wait, vdd_last;
+ int ret;
+ u8 vid;
+
+ /* Compensate for a board specific voltage drop between regulator and
+ * SoC before converting into an IR VID value
+ */
+ vdd += board_vdd_drop_compensation();
+ vid = DIV_ROUND_UP(vdd - 245, 5);
+
+ ret = i2c_write(i2caddress, IR36021_LOOP1_MANUAL_ID_OFFSET,
+ 1, (void *)&vid, sizeof(vid));
+ if (ret) {
+ printf("VID: failed to write VID\n");
+ return -1;
+ }
+ wait = wait_for_new_voltage(vdd, i2caddress);
+ if (wait < 0)
+ return -1;
+ debug("VID: Waited %d us\n", wait * NUM_READINGS * WAIT_FOR_ADC);
+
+ vdd_last = wait_for_voltage_stable(i2caddress);
+ if (vdd_last < 0)
+ return -1;
+ debug("VID: Current voltage is %d mV\n", vdd_last);
+ return vdd_last;
+}
+#endif
+
+static int set_voltage(int i2caddress, int vdd)
+{
+ int vdd_last = -1;
+
+#ifdef CONFIG_VOL_MONITOR_IR36021_SET
+ vdd_last = set_voltage_to_IR(i2caddress, vdd);
+#else
+ #error Specific voltage monitor must be defined
+#endif
+ return vdd_last;
+}
+
+int adjust_vdd(ulong vdd_override)
+{
+ int re_enable = disable_interrupts();
+ ccsr_gur_t __iomem *gur =
+ (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 fusesr;
+ u8 vid;
+ int vdd_target, vdd_current, vdd_last;
+ int ret, i2caddress;
+ unsigned long vdd_string_override;
+ char *vdd_string;
+ static const uint16_t vdd[32] = {
+ 0, /* unused */
+ 9875, /* 0.9875V */
+ 9750,
+ 9625,
+ 9500,
+ 9375,
+ 9250,
+ 9125,
+ 9000,
+ 8875,
+ 8750,
+ 8625,
+ 8500,
+ 8375,
+ 8250,
+ 8125,
+ 10000, /* 1.0000V */
+ 10125,
+ 10250,
+ 10375,
+ 10500,
+ 10625,
+ 10750,
+ 10875,
+ 11000,
+ 0, /* reserved */
+ };
+ struct vdd_drive {
+ u8 vid;
+ unsigned voltage;
+ };
+
+ ret = i2c_multiplexer_select_vid_channel(I2C_MUX_CH_VOL_MONITOR);
+ if (ret) {
+ debug("VID: I2C failed to switch channel\n");
+ ret = -1;
+ goto exit;
+ }
+ ret = find_ir_chip_on_i2c();
+ if (ret < 0) {
+ printf("VID: Could not find voltage regulator on I2C.\n");
+ ret = -1;
+ goto exit;
+ } else {
+ i2caddress = ret;
+ debug("VID: IR Chip found on I2C address 0x%02x\n", i2caddress);
+ }
+
+ /* get the voltage ID from fuse status register */
+ fusesr = in_be32(&gur->dcfg_fusesr);
+ /*
+ * VID is used according to the table below
+ * ---------------------------------------
+ * | DA_V |
+ * |-------------------------------------|
+ * | 5b00000 | 5b00001-5b11110 | 5b11111 |
+ * ---------------+---------+-----------------+---------|
+ * | D | 5b00000 | NO VID | VID = DA_V | NO VID |
+ * | A |----------+---------+-----------------+---------|
+ * | _ | 5b00001 |VID = | VID = |VID = |
+ * | V | ~ | DA_V_ALT| DA_V_ALT | DA_A_VLT|
+ * | _ | 5b11110 | | | |
+ * | A |----------+---------+-----------------+---------|
+ * | L | 5b11111 | No VID | VID = DA_V | NO VID |
+ * | T | | | | |
+ * ------------------------------------------------------
+ */
+ vid = (fusesr >> FSL_CORENET_DCFG_FUSESR_ALTVID_SHIFT) &
+ FSL_CORENET_DCFG_FUSESR_ALTVID_MASK;
+ if ((vid == 0) || (vid == FSL_CORENET_DCFG_FUSESR_ALTVID_MASK)) {
+ vid = (fusesr >> FSL_CORENET_DCFG_FUSESR_VID_SHIFT) &
+ FSL_CORENET_DCFG_FUSESR_VID_MASK;
+ }
+ vdd_target = vdd[vid];
+
+ /* check override variable for overriding VDD */
+ vdd_string = getenv(CONFIG_VID_FLS_ENV);
+ if (vdd_override == 0 && vdd_string &&
+ !strict_strtoul(vdd_string, 10, &vdd_string_override))
+ vdd_override = vdd_string_override;
+ if (vdd_override >= VDD_MV_MIN && vdd_override <= VDD_MV_MAX) {
+ vdd_target = vdd_override * 10; /* convert to 1/10 mV */
+ debug("VDD override is %lu\n", vdd_override);
+ } else if (vdd_override != 0) {
+ printf("Invalid value.\n");
+ }
+ if (vdd_target == 0) {
+ debug("VID: VID not used\n");
+ ret = 0;
+ goto exit;
+ } else {
+ /* divide and round up by 10 to get a value in mV */
+ vdd_target = DIV_ROUND_UP(vdd_target, 10);
+ debug("VID: vid = %d mV\n", vdd_target);
+ }
+
+ /*
+ * Read voltage monitor to check real voltage.
+ */
+ vdd_last = read_voltage(i2caddress);
+ if (vdd_last < 0) {
+ printf("VID: Couldn't read sensor abort VID adjustment\n");
+ ret = -1;
+ goto exit;
+ }
+ vdd_current = vdd_last;
+ debug("VID: Core voltage is currently at %d mV\n", vdd_last);
+ /*
+ * Adjust voltage to at or one step above target.
+ * As measurements are less precise than setting the values
+ * we may run through dummy steps that cancel each other
+ * when stepping up and then down.
+ */
+ while (vdd_last > 0 &&
+ vdd_last < vdd_target) {
+ vdd_current += IR_VDD_STEP_UP;
+ vdd_last = set_voltage(i2caddress, vdd_current);
+ }
+ while (vdd_last > 0 &&
+ vdd_last > vdd_target + (IR_VDD_STEP_DOWN - 1)) {
+ vdd_current -= IR_VDD_STEP_DOWN;
+ vdd_last = set_voltage(i2caddress, vdd_current);
+ }
+
+ if (vdd_last > 0)
+ printf("VID: Core voltage after adjustment is at %d mV\n",
+ vdd_last);
+ else
+ ret = -1;
+exit:
+ if (re_enable)
+ enable_interrupts();
+ return ret;
+}
+
+static int print_vdd(void)
+{
+ int vdd_last, ret, i2caddress;
+
+ ret = i2c_multiplexer_select_vid_channel(I2C_MUX_CH_VOL_MONITOR);
+ if (ret) {
+ debug("VID : I2c failed to switch channel\n");
+ return -1;
+ }
+ ret = find_ir_chip_on_i2c();
+ if (ret < 0) {
+ printf("VID: Could not find voltage regulator on I2C.\n");
+ return -1;
+ } else {
+ i2caddress = ret;
+ debug("VID: IR Chip found on I2C address 0x%02x\n", i2caddress);
+ }
+
+ /*
+ * Read voltage monitor to check real voltage.
+ */
+ vdd_last = read_voltage(i2caddress);
+ if (vdd_last < 0) {
+ printf("VID: Couldn't read sensor abort VID adjustment\n");
+ return -1;
+ }
+ printf("VID: Core voltage is at %d mV\n", vdd_last);
+
+ return 0;
+}
+
+static int do_vdd_override(cmd_tbl_t *cmdtp,
+ int flag, int argc,
+ char * const argv[])
+{
+ ulong override;
+
+ if (argc < 2)
+ return CMD_RET_USAGE;
+
+ if (!strict_strtoul(argv[1], 10, &override))
+ adjust_vdd(override); /* the value is checked by callee */
+ else
+ return CMD_RET_USAGE;
+ return 0;
+}
+
+static int do_vdd_read(cmd_tbl_t *cmdtp,
+ int flag, int argc,
+ char * const argv[])
+{
+ if (argc < 1)
+ return CMD_RET_USAGE;
+ print_vdd();
+
+ return 0;
+}
+
+U_BOOT_CMD(
+ vdd_override, 2, 0, do_vdd_override,
+ "override VDD",
+ " - override with the voltage specified in mV, eg. 1050"
+);
+
+U_BOOT_CMD(
+ vdd_read, 1, 0, do_vdd_read,
+ "read VDD",
+ " - Read the voltage specified in mV"
+)
diff --git a/board/freescale/common/vid.h b/board/freescale/common/vid.h
new file mode 100644
index 0000000..a9c7bb4
--- /dev/null
+++ b/board/freescale/common/vid.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __VID_H_
+#define __VID_H_
+
+#define IR36021_LOOP1_MANUAL_ID_OFFSET 0x6A
+#define IR36021_LOOP1_VOUT_OFFSET 0x9A
+#define IR36021_MFR_ID_OFFSET 0x92
+#define IR36021_MFR_ID 0x43
+
+/* step the IR regulator in 5mV increments */
+#define IR_VDD_STEP_DOWN 5
+#define IR_VDD_STEP_UP 5
+int adjust_vdd(ulong vdd_override);
+
+#endif /* __VID_H_ */
diff --git a/board/freescale/common/vsc3316_3308.c b/board/freescale/common/vsc3316_3308.c
index 97a25e8..dd9c37e 100644
--- a/board/freescale/common/vsc3316_3308.c
+++ b/board/freescale/common/vsc3316_3308.c
@@ -13,7 +13,12 @@
#define INPUT_STATE_REG 0x13
#define GLOBAL_INPUT_ISE1 0x51
#define GLOBAL_INPUT_ISE2 0x52
+#define GLOBAL_INPUT_GAIN 0x53
#define GLOBAL_INPUT_LOS 0x55
+#define GLOBAL_OUTPUT_PE1 0x56
+#define GLOBAL_OUTPUT_PE2 0x57
+#define GLOBAL_OUTPUT_LEVEL 0x58
+#define GLOBAL_OUTPUT_TERMINATION 0x5A
#define GLOBAL_CORE_CNTRL 0x5D
#define OUTPUT_MODE_PAGE 0x23
#define CORE_CONTROL_PAGE 0x25
@@ -92,6 +97,109 @@ int vsc3316_config(unsigned int vsc_addr, int8_t con_arr[][2],
return 0;
}
+#ifdef CONFIG_SYS_FSL_B4860QDS_XFI_ERR
+int vsc3308_config_adjust(unsigned int vsc_addr, const int8_t con_arr[][2],
+ unsigned int num_con)
+{
+ unsigned int i;
+ u8 rev_id = 0;
+ int ret;
+
+ debug("VSC:Initializing VSC3308 at I2C address 0x%x for Tx\n",
+ vsc_addr);
+
+ ret = i2c_read(vsc_addr, REVISION_ID_REG, 1, &rev_id, 1);
+ if (ret < 0) {
+ printf("VSC:0x%x could not read REV_ID from device.\n",
+ vsc_addr);
+ return ret;
+ }
+
+ if (rev_id != 0xab) {
+ printf("VSC: device at address 0x%x is not VSC3316/3308.\n",
+ vsc_addr);
+ return -ENODEV;
+ }
+
+ ret = vsc_if_enable(vsc_addr);
+ if (ret) {
+ printf("VSC:0x%x could not configured for 2-wire I/F.\n",
+ vsc_addr);
+ return ret;
+ }
+
+ /* config connections - page 0x00 */
+ i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, CONNECTION_CONFIG_PAGE);
+
+ /* Configure Global Input ISE */
+ i2c_reg_write(vsc_addr, GLOBAL_INPUT_ISE1, 0);
+ i2c_reg_write(vsc_addr, GLOBAL_INPUT_ISE2, 0);
+
+ /* Configure Tx/Rx Global Output PE1 */
+ i2c_reg_write(vsc_addr, GLOBAL_OUTPUT_PE1, 0);
+
+ /* Configure Tx/Rx Global Output PE2 */
+ i2c_reg_write(vsc_addr, GLOBAL_OUTPUT_PE2, 0);
+
+ /* Configure Tx/Rx Global Input GAIN */
+ i2c_reg_write(vsc_addr, GLOBAL_INPUT_GAIN, 0x3F);
+
+ /* Setting Global Input LOS threshold value */
+ i2c_reg_write(vsc_addr, GLOBAL_INPUT_LOS, 0xE0);
+
+ /* Setting Global output termination */
+ i2c_reg_write(vsc_addr, GLOBAL_OUTPUT_TERMINATION, 0);
+
+ /* Configure Tx/Rx Global Output level */
+ if (vsc_addr == VSC3308_TX_ADDRESS)
+ i2c_reg_write(vsc_addr, GLOBAL_OUTPUT_LEVEL, 4);
+ else
+ i2c_reg_write(vsc_addr, GLOBAL_OUTPUT_LEVEL, 2);
+
+ /* Making crosspoint connections, by connecting required
+ * input to output */
+ for (i = 0; i < num_con ; i++)
+ i2c_reg_write(vsc_addr, con_arr[i][1], con_arr[i][0]);
+
+ /* input state - page 0x13 */
+ i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, INPUT_STATE_REG);
+ /* Turning off all the required input of the switch */
+ for (i = 0; i < num_con; i++)
+ i2c_reg_write(vsc_addr, con_arr[i][0], 1);
+
+ /* only turn on specific Tx/Rx requested by the XFI erratum */
+ if (vsc_addr == VSC3308_TX_ADDRESS) {
+ i2c_reg_write(vsc_addr, 2, 0);
+ i2c_reg_write(vsc_addr, 3, 0);
+ } else {
+ i2c_reg_write(vsc_addr, 0, 0);
+ i2c_reg_write(vsc_addr, 1, 0);
+ }
+
+ /* config output mode - page 0x23 */
+ i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, OUTPUT_MODE_PAGE);
+ /* Turn off the Output driver correspond to required output*/
+ for (i = 0; i < num_con ; i++)
+ i2c_reg_write(vsc_addr, con_arr[i][1], 1);
+
+ /* only turn on specific Tx/Rx requested by the XFI erratum */
+ if (vsc_addr == VSC3308_TX_ADDRESS) {
+ i2c_reg_write(vsc_addr, 0, 0);
+ i2c_reg_write(vsc_addr, 1, 0);
+ } else {
+ i2c_reg_write(vsc_addr, 3, 0);
+ i2c_reg_write(vsc_addr, 4, 0);
+ }
+
+ /* configure global core control register, Turn on Global core power */
+ i2c_reg_write(vsc_addr, GLOBAL_CORE_CNTRL, 0);
+
+ vsc_wp_config(vsc_addr);
+
+ return 0;
+}
+#endif
+
int vsc3308_config(unsigned int vsc_addr, const int8_t con_arr[][2],
unsigned int num_con)
{
diff --git a/board/freescale/common/vsc3316_3308.h b/board/freescale/common/vsc3316_3308.h
index 2a49187..d722ea3 100644
--- a/board/freescale/common/vsc3316_3308.h
+++ b/board/freescale/common/vsc3316_3308.h
@@ -14,6 +14,10 @@
int vsc_if_enable(unsigned int vsc_addr);
int vsc3316_config(unsigned int vsc_addr, int8_t con_arr[][2],
unsigned int num_con);
+#ifdef CONFIG_SYS_FSL_B4860QDS_XFI_ERR
+int vsc3308_config_adjust(unsigned int vsc_addr, const int8_t con_arr[][2],
+ unsigned int num_con);
+#endif
int vsc3308_config(unsigned int vsc_addr, const int8_t con_arr[][2],
unsigned int num_con);
void vsc_wp_config(unsigned int vsc_addr);
diff --git a/board/freescale/corenet_ds/eth_hydra.c b/board/freescale/corenet_ds/eth_hydra.c
index 35825c4..396103f 100644
--- a/board/freescale/corenet_ds/eth_hydra.c
+++ b/board/freescale/corenet_ds/eth_hydra.c
@@ -62,7 +62,7 @@
#ifdef CONFIG_FMAN_ENET
-#define BRDCFG1_EMI1_SEL_MASK 0x70
+#define BRDCFG1_EMI1_SEL_MASK 0x78
#define BRDCFG1_EMI1_SEL_SLOT1 0x10
#define BRDCFG1_EMI1_SEL_SLOT2 0x20
#define BRDCFG1_EMI1_SEL_SLOT5 0x30
@@ -202,6 +202,8 @@ static void fdt_set_mdio_mux(void *fdt, const char *alias, u32 mux)
if (!path)
path = alias;
+ do_fixup_by_path(fdt, path, "reg",
+ &mux, sizeof(mux), 1);
do_fixup_by_path(fdt, path, "fsl,hydra-mdio-muxval",
&mux, sizeof(mux), 1);
}
@@ -250,11 +252,12 @@ void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
return;
}
- if (mux == BRDCFG1_EMI1_SEL_RGMII) {
+ if (mux == (BRDCFG1_EMI1_SEL_RGMII | BRDCFG1_EMI1_EN)) {
/* RGMII */
/* The RGMII PHY is identified by the MAC connected to it */
sprintf(phy, "phy_rgmii_%u", port == FM1_DTSEC4 ? 0 : 1);
fdt_set_phy_handle(fdt, compat, addr, phy);
+ return;
}
/* If it's not RGMII or XGMII, it must be SGMII */
diff --git a/board/freescale/ls1021aqds/MAINTAINERS b/board/freescale/ls1021aqds/MAINTAINERS
index e30e944..638833d 100644
--- a/board/freescale/ls1021aqds/MAINTAINERS
+++ b/board/freescale/ls1021aqds/MAINTAINERS
@@ -6,3 +6,6 @@ F: include/configs/ls1021aqds.h
F: configs/ls1021aqds_nor_defconfig
F: configs/ls1021aqds_ddr4_nor_defconfig
F: configs/ls1021aqds_nor_SECURE_BOOT_defconfig
+F: configs/ls1021aqds_sdcard_defconfig
+F: configs/ls1021aqds_qspi_defconfig
+F: configs/ls1021aqds_nand_defconfig
diff --git a/board/freescale/ls1021aqds/ddr.c b/board/freescale/ls1021aqds/ddr.c
index 5898e33..a539ff9 100644
--- a/board/freescale/ls1021aqds/ddr.c
+++ b/board/freescale/ls1021aqds/ddr.c
@@ -153,9 +153,12 @@ phys_size_t initdram(int board_type)
{
phys_size_t dram_size;
+#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_SPL)
puts("Initializing DDR....using SPD\n");
dram_size = fsl_ddr_sdram();
-
+#else
+ dram_size = fsl_ddr_sdram_size();
+#endif
return dram_size;
}
diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c
index 0a7720a..f08e54f 100644
--- a/board/freescale/ls1021aqds/ls1021aqds.c
+++ b/board/freescale/ls1021aqds/ls1021aqds.c
@@ -8,12 +8,17 @@
#include <i2c.h>
#include <asm/io.h>
#include <asm/arch/immap_ls102xa.h>
+#include <asm/arch/ns_access.h>
#include <asm/arch/clock.h>
#include <asm/arch/fsl_serdes.h>
+#include <asm/arch/ls102xa_stream_id.h>
+#include <asm/pcie_layerscape.h>
+#include <hwconfig.h>
#include <mmc.h>
#include <fsl_esdhc.h>
#include <fsl_ifc.h>
#include <fsl_sec.h>
+#include <spl.h>
#include "../common/qixis.h"
#include "ls1021aqds_qixis.h"
@@ -21,9 +26,22 @@
#include "../../../drivers/qe/qe.h"
#endif
+#define PIN_MUX_SEL_CAN 0x03
+#define PIN_MUX_SEL_IIC2 0xa0
+#define PIN_MUX_SEL_RGMII 0x00
+#define PIN_MUX_SEL_SAI 0x0c
+#define PIN_MUX_SEL_SDHC 0x00
+
+#define SET_SDHC_MUX_SEL(reg, value) ((reg & 0x0f) | value)
+#define SET_EC_MUX_SEL(reg, value) ((reg & 0xf0) | value)
DECLARE_GLOBAL_DATA_PTR;
enum {
+ MUX_TYPE_CAN,
+ MUX_TYPE_IIC2,
+ MUX_TYPE_RGMII,
+ MUX_TYPE_SAI,
+ MUX_TYPE_SDHC,
MUX_TYPE_SD_PCI4,
MUX_TYPE_SD_PC_SA_SG_SG,
MUX_TYPE_SD_PC_SA_PC_SG,
@@ -32,11 +50,20 @@ enum {
int checkboard(void)
{
+#ifndef CONFIG_QSPI_BOOT
char buf[64];
+#endif
+#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_QSPI_BOOT)
u8 sw;
+#endif
puts("Board: LS1021AQDS\n");
+#ifdef CONFIG_SD_BOOT
+ puts("SD\n");
+#elif CONFIG_QSPI_BOOT
+ puts("QSPI\n");
+#else
sw = QIXIS_READ(brdcfg[0]);
sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
@@ -50,13 +77,16 @@ int checkboard(void)
printf("IFCCard\n");
else
printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
+#endif
+#ifndef CONFIG_QSPI_BOOT
printf("Sys ID:0x%02x, Sys Ver: 0x%02x\n",
QIXIS_READ(id), QIXIS_READ(arch));
printf("FPGA: v%d (%s), build %d\n",
(int)QIXIS_READ(scver), qixis_read_tag(buf),
(int)qixis_read_minor());
+#endif
return 0;
}
@@ -101,8 +131,27 @@ unsigned long get_board_ddr_clk(void)
return 66666666;
}
+int select_i2c_ch_pca9547(u8 ch)
+{
+ int ret;
+
+ ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
+ if (ret) {
+ puts("PCA: failed to select proper channel\n");
+ return ret;
+ }
+
+ return 0;
+}
+
int dram_init(void)
{
+ /*
+ * When resuming from deep sleep, the I2C channel may not be
+ * in the default channel. So, switch to the default channel
+ * before accessing DDR SPD.
+ */
+ select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
gd->ram_size = initdram(0);
return 0;
@@ -121,19 +170,6 @@ int board_mmc_init(bd_t *bis)
}
#endif
-int select_i2c_ch_pca9547(u8 ch)
-{
- int ret;
-
- ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
- if (ret) {
- puts("PCA: failed to select proper channel\n");
- return ret;
- }
-
- return 0;
-}
-
int board_early_init_f(void)
{
struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
@@ -148,6 +184,10 @@ int board_early_init_f(void)
init_early_memctl_regs();
#endif
+#ifdef CONFIG_FSL_QSPI
+ out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL);
+#endif
+
/* Workaround for the issue that DDR could not respond to
* barrier transaction which is generated by executing DSB/ISB
* instruction. Set CCI-400 control override register to
@@ -158,13 +198,75 @@ int board_early_init_f(void)
return 0;
}
+#ifdef CONFIG_SPL_BUILD
+void board_init_f(ulong dummy)
+{
+ struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
+
+#ifdef CONFIG_NAND_BOOT
+ struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
+ u32 porsr1, pinctl;
+
+ /*
+ * There is LS1 SoC issue where NOR, FPGA are inaccessible during
+ * NAND boot because IFC signals > IFC_AD7 are not enabled.
+ * This workaround changes RCW source to make all signals enabled.
+ */
+ porsr1 = in_be32(&gur->porsr1);
+ pinctl = ((porsr1 & ~(DCFG_CCSR_PORSR1_RCW_MASK)) |
+ DCFG_CCSR_PORSR1_RCW_SRC_I2C);
+ out_be32((unsigned int *)(CONFIG_SYS_DCSR_DCFG_ADDR + DCFG_DCSR_PORCR1),
+ pinctl);
+#endif
+
+ /* Set global data pointer */
+ gd = &gdata;
+
+ /* Clear the BSS */
+ memset(__bss_start, 0, __bss_end - __bss_start);
+
+#ifdef CONFIG_FSL_IFC
+ init_early_memctl_regs();
+#endif
+
+ get_clocks();
+
+ preloader_console_init();
+
+#ifdef CONFIG_SPL_I2C_SUPPORT
+ i2c_init_all();
+#endif
+ out_le32(&cci->ctrl_ord, CCI400_CTRLORD_TERM_BARRIER);
+
+ dram_init();
+
+ board_init_r(NULL, 0);
+}
+#endif
+
int config_board_mux(int ctrl_type)
{
- u8 reg12;
+ u8 reg12, reg14;
reg12 = QIXIS_READ(brdcfg[12]);
+ reg14 = QIXIS_READ(brdcfg[14]);
switch (ctrl_type) {
+ case MUX_TYPE_CAN:
+ reg14 = SET_EC_MUX_SEL(reg14, PIN_MUX_SEL_CAN);
+ break;
+ case MUX_TYPE_IIC2:
+ reg14 = SET_SDHC_MUX_SEL(reg14, PIN_MUX_SEL_IIC2);
+ break;
+ case MUX_TYPE_RGMII:
+ reg14 = SET_EC_MUX_SEL(reg14, PIN_MUX_SEL_RGMII);
+ break;
+ case MUX_TYPE_SAI:
+ reg14 = SET_EC_MUX_SEL(reg14, PIN_MUX_SEL_SAI);
+ break;
+ case MUX_TYPE_SDHC:
+ reg14 = SET_SDHC_MUX_SEL(reg14, PIN_MUX_SEL_SDHC);
+ break;
case MUX_TYPE_SD_PCI4:
reg12 = 0x38;
break;
@@ -183,6 +285,7 @@ int config_board_mux(int ctrl_type)
}
QIXIS_WRITE(brdcfg[12], reg12);
+ QIXIS_WRITE(brdcfg[14], reg14);
return 0;
}
@@ -216,15 +319,154 @@ int config_serdes_mux(void)
return 0;
}
-#if defined(CONFIG_MISC_INIT_R)
int misc_init_r(void)
{
+ int conflict_flag;
+
+ /* some signals can not enable simultaneous*/
+ conflict_flag = 0;
+ if (hwconfig("sdhc"))
+ conflict_flag++;
+ if (hwconfig("iic2"))
+ conflict_flag++;
+ if (conflict_flag > 1) {
+ printf("WARNING: pin conflict !\n");
+ return 0;
+ }
+
+ conflict_flag = 0;
+ if (hwconfig("rgmii"))
+ conflict_flag++;
+ if (hwconfig("can"))
+ conflict_flag++;
+ if (hwconfig("sai"))
+ conflict_flag++;
+ if (conflict_flag > 1) {
+ printf("WARNING: pin conflict !\n");
+ return 0;
+ }
+
+ if (hwconfig("can"))
+ config_board_mux(MUX_TYPE_CAN);
+ else if (hwconfig("rgmii"))
+ config_board_mux(MUX_TYPE_RGMII);
+ else if (hwconfig("sai"))
+ config_board_mux(MUX_TYPE_SAI);
+
+ if (hwconfig("iic2"))
+ config_board_mux(MUX_TYPE_IIC2);
+ else if (hwconfig("sdhc"))
+ config_board_mux(MUX_TYPE_SDHC);
+
#ifdef CONFIG_FSL_CAAM
return sec_init();
#endif
+ return 0;
}
+
+#ifdef CONFIG_LS102XA_NS_ACCESS
+static struct csu_ns_dev ns_dev[] = {
+ { CSU_CSLX_PCIE2_IO, CSU_ALL_RW },
+ { CSU_CSLX_PCIE1_IO, CSU_ALL_RW },
+ { CSU_CSLX_MG2TPR_IP, CSU_ALL_RW },
+ { CSU_CSLX_IFC_MEM, CSU_ALL_RW },
+ { CSU_CSLX_OCRAM, CSU_ALL_RW },
+ { CSU_CSLX_GIC, CSU_ALL_RW },
+ { CSU_CSLX_PCIE1, CSU_ALL_RW },
+ { CSU_CSLX_OCRAM2, CSU_ALL_RW },
+ { CSU_CSLX_QSPI_MEM, CSU_ALL_RW },
+ { CSU_CSLX_PCIE2, CSU_ALL_RW },
+ { CSU_CSLX_SATA, CSU_ALL_RW },
+ { CSU_CSLX_USB3, CSU_ALL_RW },
+ { CSU_CSLX_SERDES, CSU_ALL_RW },
+ { CSU_CSLX_QDMA, CSU_ALL_RW },
+ { CSU_CSLX_LPUART2, CSU_ALL_RW },
+ { CSU_CSLX_LPUART1, CSU_ALL_RW },
+ { CSU_CSLX_LPUART4, CSU_ALL_RW },
+ { CSU_CSLX_LPUART3, CSU_ALL_RW },
+ { CSU_CSLX_LPUART6, CSU_ALL_RW },
+ { CSU_CSLX_LPUART5, CSU_ALL_RW },
+ { CSU_CSLX_DSPI2, CSU_ALL_RW },
+ { CSU_CSLX_DSPI1, CSU_ALL_RW },
+ { CSU_CSLX_QSPI, CSU_ALL_RW },
+ { CSU_CSLX_ESDHC, CSU_ALL_RW },
+ { CSU_CSLX_2D_ACE, CSU_ALL_RW },
+ { CSU_CSLX_IFC, CSU_ALL_RW },
+ { CSU_CSLX_I2C1, CSU_ALL_RW },
+ { CSU_CSLX_USB2, CSU_ALL_RW },
+ { CSU_CSLX_I2C3, CSU_ALL_RW },
+ { CSU_CSLX_I2C2, CSU_ALL_RW },
+ { CSU_CSLX_DUART2, CSU_ALL_RW },
+ { CSU_CSLX_DUART1, CSU_ALL_RW },
+ { CSU_CSLX_WDT2, CSU_ALL_RW },
+ { CSU_CSLX_WDT1, CSU_ALL_RW },
+ { CSU_CSLX_EDMA, CSU_ALL_RW },
+ { CSU_CSLX_SYS_CNT, CSU_ALL_RW },
+ { CSU_CSLX_DMA_MUX2, CSU_ALL_RW },
+ { CSU_CSLX_DMA_MUX1, CSU_ALL_RW },
+ { CSU_CSLX_DDR, CSU_ALL_RW },
+ { CSU_CSLX_QUICC, CSU_ALL_RW },
+ { CSU_CSLX_DCFG_CCU_RCPM, CSU_ALL_RW },
+ { CSU_CSLX_SECURE_BOOTROM, CSU_ALL_RW },
+ { CSU_CSLX_SFP, CSU_ALL_RW },
+ { CSU_CSLX_TMU, CSU_ALL_RW },
+ { CSU_CSLX_SECURE_MONITOR, CSU_ALL_RW },
+ { CSU_CSLX_RESERVED0, CSU_ALL_RW },
+ { CSU_CSLX_ETSEC1, CSU_ALL_RW },
+ { CSU_CSLX_SEC5_5, CSU_ALL_RW },
+ { CSU_CSLX_ETSEC3, CSU_ALL_RW },
+ { CSU_CSLX_ETSEC2, CSU_ALL_RW },
+ { CSU_CSLX_GPIO2, CSU_ALL_RW },
+ { CSU_CSLX_GPIO1, CSU_ALL_RW },
+ { CSU_CSLX_GPIO4, CSU_ALL_RW },
+ { CSU_CSLX_GPIO3, CSU_ALL_RW },
+ { CSU_CSLX_PLATFORM_CONT, CSU_ALL_RW },
+ { CSU_CSLX_CSU, CSU_ALL_RW },
+ { CSU_CSLX_ASRC, CSU_ALL_RW },
+ { CSU_CSLX_SPDIF, CSU_ALL_RW },
+ { CSU_CSLX_FLEXCAN2, CSU_ALL_RW },
+ { CSU_CSLX_FLEXCAN1, CSU_ALL_RW },
+ { CSU_CSLX_FLEXCAN4, CSU_ALL_RW },
+ { CSU_CSLX_FLEXCAN3, CSU_ALL_RW },
+ { CSU_CSLX_SAI2, CSU_ALL_RW },
+ { CSU_CSLX_SAI1, CSU_ALL_RW },
+ { CSU_CSLX_SAI4, CSU_ALL_RW },
+ { CSU_CSLX_SAI3, CSU_ALL_RW },
+ { CSU_CSLX_FTM2, CSU_ALL_RW },
+ { CSU_CSLX_FTM1, CSU_ALL_RW },
+ { CSU_CSLX_FTM4, CSU_ALL_RW },
+ { CSU_CSLX_FTM3, CSU_ALL_RW },
+ { CSU_CSLX_FTM6, CSU_ALL_RW },
+ { CSU_CSLX_FTM5, CSU_ALL_RW },
+ { CSU_CSLX_FTM8, CSU_ALL_RW },
+ { CSU_CSLX_FTM7, CSU_ALL_RW },
+ { CSU_CSLX_COP_DCSR, CSU_ALL_RW },
+ { CSU_CSLX_EPU, CSU_ALL_RW },
+ { CSU_CSLX_GDI, CSU_ALL_RW },
+ { CSU_CSLX_DDI, CSU_ALL_RW },
+ { CSU_CSLX_RESERVED1, CSU_ALL_RW },
+ { CSU_CSLX_USB3_PHY, CSU_ALL_RW },
+ { CSU_CSLX_RESERVED2, CSU_ALL_RW },
+};
#endif
+struct smmu_stream_id dev_stream_id[] = {
+ { 0x100, 0x01, "ETSEC MAC1" },
+ { 0x104, 0x02, "ETSEC MAC2" },
+ { 0x108, 0x03, "ETSEC MAC3" },
+ { 0x10c, 0x04, "PEX1" },
+ { 0x110, 0x05, "PEX2" },
+ { 0x114, 0x06, "qDMA" },
+ { 0x118, 0x07, "SATA" },
+ { 0x11c, 0x08, "USB3" },
+ { 0x120, 0x09, "QE" },
+ { 0x124, 0x0a, "eSDHC" },
+ { 0x128, 0x0b, "eMA" },
+ { 0x14c, 0x0c, "2D-ACE" },
+ { 0x150, 0x0d, "USB2" },
+ { 0x18c, 0x0e, "DEBUG" },
+};
+
int board_init(void)
{
struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
@@ -247,6 +489,13 @@ int board_init(void)
config_serdes_mux();
#endif
+ ls102xa_config_smmu_stream_id(dev_stream_id,
+ ARRAY_SIZE(dev_stream_id));
+
+#ifdef CONFIG_LS102XA_NS_ACCESS
+ enable_devices_ns_access(ns_dev, ARRAY_SIZE(ns_dev));
+#endif
+
#ifdef CONFIG_U_QE
u_qe_init();
#endif
@@ -258,6 +507,10 @@ int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
+#ifdef CONFIG_PCIE_LAYERSCAPE
+ ft_pcie_setup(blob, bd);
+#endif
+
return 0;
}
diff --git a/board/freescale/ls1021aqds/ls102xa_pbi.cfg b/board/freescale/ls1021aqds/ls102xa_pbi.cfg
new file mode 100644
index 0000000..f1a1b63
--- /dev/null
+++ b/board/freescale/ls1021aqds/ls102xa_pbi.cfg
@@ -0,0 +1,12 @@
+#PBI commands
+
+09570200 ffffffff
+09570158 00000300
+8940007c 21f47300
+
+#Configure Scratch register
+09ee0200 10000000
+#Configure alternate space
+09570158 00001000
+#Flush PBL data
+096100c0 000FFFFF
diff --git a/board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg b/board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg
new file mode 100644
index 0000000..222c71d
--- /dev/null
+++ b/board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg
@@ -0,0 +1,7 @@
+#PBL preamble and RCW header
+aa55aa55 01ee0100
+# serdes protocol
+0608000a 00000000 00000000 00000000
+60000000 00407900 e0106a00 21046000
+00000000 00000000 00000000 00038000
+00000000 001b7200 00000000 00000000
diff --git a/board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg b/board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg
new file mode 100644
index 0000000..9d99bd8
--- /dev/null
+++ b/board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg
@@ -0,0 +1,14 @@
+#PBL preamble and RCW header
+aa55aa55 01ee0100
+
+#enable IFC, disable QSPI and DSPI
+0608000a 00000000 00000000 00000000
+60000000 00407900 60040a00 21046000
+00000000 00000000 00000000 00038000
+00000000 001b7200 00000000 00000000
+
+#disable IFC, enable QSPI and DSPI
+#0608000a 00000000 00000000 00000000
+#60000000 00407900 60040a00 21046000
+#00000000 00000000 00000000 00038000
+#20024800 001b7200 00000000 00000000
diff --git a/board/freescale/ls1021atwr/MAINTAINERS b/board/freescale/ls1021atwr/MAINTAINERS
index 8def0e5..9176706 100644
--- a/board/freescale/ls1021atwr/MAINTAINERS
+++ b/board/freescale/ls1021atwr/MAINTAINERS
@@ -5,3 +5,5 @@ F: board/freescale/ls1021atwr/
F: include/configs/ls1021atwr.h
F: configs/ls1021atwr_nor_defconfig
F: configs/ls1021atwr_nor_SECURE_BOOT_defconfig
+F: configs/ls1021atwr_sdcard_defconfig
+F: configs/ls1021atwr_qspi_defconfig
diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c
index 3e8c37b..8ab229d 100644
--- a/board/freescale/ls1021atwr/ls1021atwr.c
+++ b/board/freescale/ls1021atwr/ls1021atwr.c
@@ -8,8 +8,11 @@
#include <i2c.h>
#include <asm/io.h>
#include <asm/arch/immap_ls102xa.h>
+#include <asm/arch/ns_access.h>
#include <asm/arch/clock.h>
#include <asm/arch/fsl_serdes.h>
+#include <asm/arch/ls102xa_stream_id.h>
+#include <asm/pcie_layerscape.h>
#include <mmc.h>
#include <fsl_esdhc.h>
#include <fsl_ifc.h>
@@ -17,6 +20,7 @@
#include <fsl_mdio.h>
#include <tsec.h>
#include <fsl_sec.h>
+#include <spl.h>
#ifdef CONFIG_U_QE
#include "../../../drivers/qe/qe.h"
#endif
@@ -70,6 +74,7 @@ struct cpld_data {
u8 rev2; /* Reserved */
};
+#ifndef CONFIG_QSPI_BOOT
static void convert_serdes_mux(int type, int need_reset);
void cpld_show(void)
@@ -105,11 +110,14 @@ void cpld_show(void)
in_8(&cpld_data->serdes_mux));
#endif
}
+#endif
int checkboard(void)
{
puts("Board: LS1021ATWR\n");
+#ifndef CONFIG_QSPI_BOOT
cpld_show();
+#endif
return 0;
}
@@ -218,6 +226,7 @@ int board_eth_init(bd_t *bis)
}
#endif
+#ifndef CONFIG_QSPI_BOOT
int config_serdes_mux(void)
{
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
@@ -249,6 +258,7 @@ int config_serdes_mux(void)
return 0;
}
+#endif
int board_early_init_f(void)
{
@@ -267,9 +277,135 @@ int board_early_init_f(void)
out_be32(&scfg->pixclkcr, SCFG_PIXCLKCR_PXCKEN);
#endif
+#ifdef CONFIG_FSL_QSPI
+ out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL);
+#endif
+
return 0;
}
+#ifdef CONFIG_SPL_BUILD
+void board_init_f(ulong dummy)
+{
+ /* Set global data pointer */
+ gd = &gdata;
+
+ /* Clear the BSS */
+ memset(__bss_start, 0, __bss_end - __bss_start);
+
+ get_clocks();
+
+ preloader_console_init();
+
+ dram_init();
+
+ board_init_r(NULL, 0);
+}
+#endif
+
+#ifdef CONFIG_LS102XA_NS_ACCESS
+static struct csu_ns_dev ns_dev[] = {
+ { CSU_CSLX_PCIE2_IO, CSU_ALL_RW },
+ { CSU_CSLX_PCIE1_IO, CSU_ALL_RW },
+ { CSU_CSLX_MG2TPR_IP, CSU_ALL_RW },
+ { CSU_CSLX_IFC_MEM, CSU_ALL_RW },
+ { CSU_CSLX_OCRAM, CSU_ALL_RW },
+ { CSU_CSLX_GIC, CSU_ALL_RW },
+ { CSU_CSLX_PCIE1, CSU_ALL_RW },
+ { CSU_CSLX_OCRAM2, CSU_ALL_RW },
+ { CSU_CSLX_QSPI_MEM, CSU_ALL_RW },
+ { CSU_CSLX_PCIE2, CSU_ALL_RW },
+ { CSU_CSLX_SATA, CSU_ALL_RW },
+ { CSU_CSLX_USB3, CSU_ALL_RW },
+ { CSU_CSLX_SERDES, CSU_ALL_RW },
+ { CSU_CSLX_QDMA, CSU_ALL_RW },
+ { CSU_CSLX_LPUART2, CSU_ALL_RW },
+ { CSU_CSLX_LPUART1, CSU_ALL_RW },
+ { CSU_CSLX_LPUART4, CSU_ALL_RW },
+ { CSU_CSLX_LPUART3, CSU_ALL_RW },
+ { CSU_CSLX_LPUART6, CSU_ALL_RW },
+ { CSU_CSLX_LPUART5, CSU_ALL_RW },
+ { CSU_CSLX_DSPI2, CSU_ALL_RW },
+ { CSU_CSLX_DSPI1, CSU_ALL_RW },
+ { CSU_CSLX_QSPI, CSU_ALL_RW },
+ { CSU_CSLX_ESDHC, CSU_ALL_RW },
+ { CSU_CSLX_2D_ACE, CSU_ALL_RW },
+ { CSU_CSLX_IFC, CSU_ALL_RW },
+ { CSU_CSLX_I2C1, CSU_ALL_RW },
+ { CSU_CSLX_USB2, CSU_ALL_RW },
+ { CSU_CSLX_I2C3, CSU_ALL_RW },
+ { CSU_CSLX_I2C2, CSU_ALL_RW },
+ { CSU_CSLX_DUART2, CSU_ALL_RW },
+ { CSU_CSLX_DUART1, CSU_ALL_RW },
+ { CSU_CSLX_WDT2, CSU_ALL_RW },
+ { CSU_CSLX_WDT1, CSU_ALL_RW },
+ { CSU_CSLX_EDMA, CSU_ALL_RW },
+ { CSU_CSLX_SYS_CNT, CSU_ALL_RW },
+ { CSU_CSLX_DMA_MUX2, CSU_ALL_RW },
+ { CSU_CSLX_DMA_MUX1, CSU_ALL_RW },
+ { CSU_CSLX_DDR, CSU_ALL_RW },
+ { CSU_CSLX_QUICC, CSU_ALL_RW },
+ { CSU_CSLX_DCFG_CCU_RCPM, CSU_ALL_RW },
+ { CSU_CSLX_SECURE_BOOTROM, CSU_ALL_RW },
+ { CSU_CSLX_SFP, CSU_ALL_RW },
+ { CSU_CSLX_TMU, CSU_ALL_RW },
+ { CSU_CSLX_SECURE_MONITOR, CSU_ALL_RW },
+ { CSU_CSLX_RESERVED0, CSU_ALL_RW },
+ { CSU_CSLX_ETSEC1, CSU_ALL_RW },
+ { CSU_CSLX_SEC5_5, CSU_ALL_RW },
+ { CSU_CSLX_ETSEC3, CSU_ALL_RW },
+ { CSU_CSLX_ETSEC2, CSU_ALL_RW },
+ { CSU_CSLX_GPIO2, CSU_ALL_RW },
+ { CSU_CSLX_GPIO1, CSU_ALL_RW },
+ { CSU_CSLX_GPIO4, CSU_ALL_RW },
+ { CSU_CSLX_GPIO3, CSU_ALL_RW },
+ { CSU_CSLX_PLATFORM_CONT, CSU_ALL_RW },
+ { CSU_CSLX_CSU, CSU_ALL_RW },
+ { CSU_CSLX_ASRC, CSU_ALL_RW },
+ { CSU_CSLX_SPDIF, CSU_ALL_RW },
+ { CSU_CSLX_FLEXCAN2, CSU_ALL_RW },
+ { CSU_CSLX_FLEXCAN1, CSU_ALL_RW },
+ { CSU_CSLX_FLEXCAN4, CSU_ALL_RW },
+ { CSU_CSLX_FLEXCAN3, CSU_ALL_RW },
+ { CSU_CSLX_SAI2, CSU_ALL_RW },
+ { CSU_CSLX_SAI1, CSU_ALL_RW },
+ { CSU_CSLX_SAI4, CSU_ALL_RW },
+ { CSU_CSLX_SAI3, CSU_ALL_RW },
+ { CSU_CSLX_FTM2, CSU_ALL_RW },
+ { CSU_CSLX_FTM1, CSU_ALL_RW },
+ { CSU_CSLX_FTM4, CSU_ALL_RW },
+ { CSU_CSLX_FTM3, CSU_ALL_RW },
+ { CSU_CSLX_FTM6, CSU_ALL_RW },
+ { CSU_CSLX_FTM5, CSU_ALL_RW },
+ { CSU_CSLX_FTM8, CSU_ALL_RW },
+ { CSU_CSLX_FTM7, CSU_ALL_RW },
+ { CSU_CSLX_COP_DCSR, CSU_ALL_RW },
+ { CSU_CSLX_EPU, CSU_ALL_RW },
+ { CSU_CSLX_GDI, CSU_ALL_RW },
+ { CSU_CSLX_DDI, CSU_ALL_RW },
+ { CSU_CSLX_RESERVED1, CSU_ALL_RW },
+ { CSU_CSLX_USB3_PHY, CSU_ALL_RW },
+ { CSU_CSLX_RESERVED2, CSU_ALL_RW },
+};
+#endif
+
+struct smmu_stream_id dev_stream_id[] = {
+ { 0x100, 0x01, "ETSEC MAC1" },
+ { 0x104, 0x02, "ETSEC MAC2" },
+ { 0x108, 0x03, "ETSEC MAC3" },
+ { 0x10c, 0x04, "PEX1" },
+ { 0x110, 0x05, "PEX2" },
+ { 0x114, 0x06, "qDMA" },
+ { 0x118, 0x07, "SATA" },
+ { 0x11c, 0x08, "USB3" },
+ { 0x120, 0x09, "QE" },
+ { 0x124, 0x0a, "eSDHC" },
+ { 0x128, 0x0b, "eMA" },
+ { 0x14c, 0x0c, "2D-ACE" },
+ { 0x150, 0x0d, "USB2" },
+ { 0x18c, 0x0e, "DEBUG" },
+};
+
int board_init(void)
{
struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
@@ -284,8 +420,17 @@ int board_init(void)
#ifndef CONFIG_SYS_FSL_NO_SERDES
fsl_serdes_init();
+#ifndef CONFIG_QSPI_BOOT
config_serdes_mux();
#endif
+#endif
+
+ ls102xa_config_smmu_stream_id(dev_stream_id,
+ ARRAY_SIZE(dev_stream_id));
+
+#ifdef CONFIG_LS102XA_NS_ACCESS
+ enable_devices_ns_access(ns_dev, ARRAY_SIZE(ns_dev));
+#endif
#ifdef CONFIG_U_QE
u_qe_init();
@@ -307,6 +452,10 @@ int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
+#ifdef CONFIG_PCIE_LAYERSCAPE
+ ft_pcie_setup(blob, bd);
+#endif
+
return 0;
}
@@ -329,6 +478,7 @@ u16 flash_read16(void *addr)
return (((val) >> 8) & 0x00ff) | (((val) << 8) & 0xff00);
}
+#ifndef CONFIG_QSPI_BOOT
static void convert_flash_bank(char bank)
{
struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
@@ -511,3 +661,4 @@ U_BOOT_CMD(
" -change lane C & lane D to PCIeX2\n"
"\nWARNING: If you aren't familiar with the setting of serdes, don't try to change anything!\n"
);
+#endif
diff --git a/board/freescale/ls1021atwr/ls102xa_pbi.cfg b/board/freescale/ls1021atwr/ls102xa_pbi.cfg
new file mode 100644
index 0000000..f1a1b63
--- /dev/null
+++ b/board/freescale/ls1021atwr/ls102xa_pbi.cfg
@@ -0,0 +1,12 @@
+#PBI commands
+
+09570200 ffffffff
+09570158 00000300
+8940007c 21f47300
+
+#Configure Scratch register
+09ee0200 10000000
+#Configure alternate space
+09570158 00001000
+#Flush PBL data
+096100c0 000FFFFF
diff --git a/board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg b/board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg
new file mode 100644
index 0000000..9c3e3b0
--- /dev/null
+++ b/board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg
@@ -0,0 +1,14 @@
+#PBL preamble and RCW header
+aa55aa55 01ee0100
+
+#enable IFC, disable QSPI and DSPI
+0608000a 00000000 00000000 00000000
+20000000 00407900 60040a00 21046000
+00000000 00000000 00000000 00038000
+00080000 881b7340 00000000 00000000
+
+#disable IFC, enable QSPI and DSPI
+#0608000a 00000000 00000000 00000000
+#20000000 00407900 60040a00 21046000
+#00000000 00000000 00000000 00038000
+#20084800 881b7340 00000000 00000000
diff --git a/board/freescale/mx6slevk/mx6slevk.c b/board/freescale/mx6slevk/mx6slevk.c
index 8111edf..3834eec 100644
--- a/board/freescale/mx6slevk/mx6slevk.c
+++ b/board/freescale/mx6slevk/mx6slevk.c
@@ -20,6 +20,8 @@
#include <fsl_esdhc.h>
#include <mmc.h>
#include <netdev.h>
+#include <usb.h>
+#include <usb/ehci-fsl.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -234,10 +236,52 @@ static int setup_fec(void)
/* clear gpr1[14], gpr1[18:17] to select anatop clock */
clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUX_GPR1_FEC_MASK, 0);
- return enable_fec_anatop_clock(ENET_50MHz);
+ return enable_fec_anatop_clock(ENET_50MHZ);
}
#endif
+#ifdef CONFIG_USB_EHCI_MX6
+#define USB_OTHERREGS_OFFSET 0x800
+#define UCTRL_PWR_POL (1 << 9)
+
+static iomux_v3_cfg_t const usb_otg_pads[] = {
+ /* OTG1 */
+ MX6_PAD_KEY_COL4__USB_USBOTG1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_EPDC_PWRCOM__ANATOP_USBOTG1_ID | MUX_PAD_CTRL(NO_PAD_CTRL),
+ /* OTG2 */
+ MX6_PAD_KEY_COL5__USB_USBOTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL)
+};
+
+static void setup_usb(void)
+{
+ imx_iomux_v3_setup_multiple_pads(usb_otg_pads,
+ ARRAY_SIZE(usb_otg_pads));
+}
+
+int board_usb_phy_mode(int port)
+{
+ if (port == 1)
+ return USB_INIT_HOST;
+ else
+ return usb_phy_mode(port);
+}
+
+int board_ehci_hcd_init(int port)
+{
+ u32 *usbnc_usb_ctrl;
+
+ if (port > 1)
+ return -EINVAL;
+
+ usbnc_usb_ctrl = (u32 *)(USB_BASE_ADDR + USB_OTHERREGS_OFFSET +
+ port * 4);
+
+ /* Set Power polarity */
+ setbits_le32(usbnc_usb_ctrl, UCTRL_PWR_POL);
+
+ return 0;
+}
+#endif
int board_early_init_f(void)
{
@@ -256,6 +300,11 @@ int board_init(void)
#ifdef CONFIG_FEC_MXC
setup_fec();
#endif
+
+#ifdef CONFIG_USB_EHCI_MX6
+ setup_usb();
+#endif
+
return 0;
}
diff --git a/board/freescale/mx6sxsabresd/mx6sxsabresd.c b/board/freescale/mx6sxsabresd/mx6sxsabresd.c
index 7aee074..fd8bc72 100644
--- a/board/freescale/mx6sxsabresd/mx6sxsabresd.c
+++ b/board/freescale/mx6sxsabresd/mx6sxsabresd.c
@@ -26,6 +26,8 @@
#include <power/pmic.h>
#include <power/pfuze100_pmic.h>
#include "../common/pfuze.h"
+#include <usb.h>
+#include <usb/ehci-fsl.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -168,7 +170,7 @@ static int setup_fec(void)
reg |= BM_ANADIG_PLL_ENET_REF_25M_ENABLE;
writel(reg, &anatop->pll_enet);
- return enable_fec_anatop_clock(ENET_125MHz);
+ return enable_fec_anatop_clock(ENET_125MHZ);
}
int board_eth_init(bd_t *bis)
@@ -212,6 +214,49 @@ int power_init_board(void)
return 0;
}
+#ifdef CONFIG_USB_EHCI_MX6
+#define USB_OTHERREGS_OFFSET 0x800
+#define UCTRL_PWR_POL (1 << 9)
+
+static iomux_v3_cfg_t const usb_otg_pads[] = {
+ /* OGT1 */
+ MX6_PAD_GPIO1_IO09__USB_OTG1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6_PAD_GPIO1_IO10__ANATOP_OTG1_ID | MUX_PAD_CTRL(NO_PAD_CTRL),
+ /* OTG2 */
+ MX6_PAD_GPIO1_IO12__USB_OTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL)
+};
+
+static void setup_usb(void)
+{
+ imx_iomux_v3_setup_multiple_pads(usb_otg_pads,
+ ARRAY_SIZE(usb_otg_pads));
+}
+
+int board_usb_phy_mode(int port)
+{
+ if (port == 1)
+ return USB_INIT_HOST;
+ else
+ return usb_phy_mode(port);
+}
+
+int board_ehci_hcd_init(int port)
+{
+ u32 *usbnc_usb_ctrl;
+
+ if (port > 1)
+ return -EINVAL;
+
+ usbnc_usb_ctrl = (u32 *)(USB_BASE_ADDR + USB_OTHERREGS_OFFSET +
+ port * 4);
+
+ /* Set Power polarity */
+ setbits_le32(usbnc_usb_ctrl, UCTRL_PWR_POL);
+
+ return 0;
+}
+#endif
+
int board_phy_config(struct phy_device *phydev)
{
/*
@@ -242,6 +287,10 @@ int board_early_init_f(void)
/* Active high for ncp692 */
gpio_direction_output(IMX_GPIO_NR(4, 16) , 1);
+#ifdef CONFIG_USB_EHCI_MX6
+ setup_usb();
+#endif
+
return 0;
}
@@ -322,7 +371,6 @@ int board_mmc_init(bd_t *bis)
return 0;
}
-
int board_init(void)
{
/* Address of boot parameters */
diff --git a/board/freescale/t102xqds/Kconfig b/board/freescale/t102xqds/Kconfig
new file mode 100644
index 0000000..4d17798
--- /dev/null
+++ b/board/freescale/t102xqds/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_T102XQDS
+
+config SYS_BOARD
+ default "t102xqds"
+
+config SYS_VENDOR
+ default "freescale"
+
+config SYS_CONFIG_NAME
+ default "T102xQDS"
+
+endif
diff --git a/board/freescale/t102xqds/MAINTAINERS b/board/freescale/t102xqds/MAINTAINERS
new file mode 100644
index 0000000..1ffccc4
--- /dev/null
+++ b/board/freescale/t102xqds/MAINTAINERS
@@ -0,0 +1,12 @@
+T102XQDS BOARD
+M: Shengzhou Liu <Shengzhou.Liu@freescale.com>
+S: Maintained
+F: board/freescale/t102xqds/
+F: include/configs/T102xQDS.h
+F: configs/T1024QDS_defconfig
+F: configs/T1024QDS_NAND_defconfig
+F: configs/T1024QDS_SDCARD_defconfig
+F: configs/T1024QDS_SPIFLASH_defconfig
+F: configs/T1024QDS_D4_defconfig
+F: configs/T1024QDS_SECURE_BOOT_defconfig
+F: configs/T1024QDS_D4_SECURE_BOOT_defconfig
diff --git a/board/freescale/t102xqds/Makefile b/board/freescale/t102xqds/Makefile
new file mode 100644
index 0000000..d94f230
--- /dev/null
+++ b/board/freescale/t102xqds/Makefile
@@ -0,0 +1,17 @@
+#
+# Copyright 2014 Freescale Semiconductor, Inc.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+ifdef CONFIG_SPL_BUILD
+obj-y += spl.o
+else
+obj-y += t102xqds.o
+obj-y += eth_t102xqds.o
+obj-$(CONFIG_PCI) += pci.o
+obj-$(CONFIG_FSL_DIU_FB) += ../t1040qds/diu.o
+endif
+obj-y += ddr.o
+obj-y += law.o
+obj-y += tlb.o
diff --git a/board/freescale/t102xqds/README b/board/freescale/t102xqds/README
new file mode 100644
index 0000000..bb0f280
--- /dev/null
+++ b/board/freescale/t102xqds/README
@@ -0,0 +1,328 @@
+T1024 SoC Overview
+------------------
+The T1024/T1023 dual core and T1014/T1013 single core QorIQ communication processor
+combines two or one 64-bit Power Architecture e5500 core respectively with high
+performance datapath acceleration logic, and network peripheral bus interfaces
+required for networking and telecommunications. This processor can be used in
+applications such as enterprise WLAN access points, routers, switches, firewall
+and other packet processing intensive small enterprise and branch office appliances,
+and general-purpose embedded computing. Its high level of integration offers
+significant performance benefits and greatly helps to simplify board design.
+
+
+The T1024 SoC includes the following function and features:
+- two e5500 cores, each with a private 256 KB L2 cache
+ - Up to 1.4 GHz with 64-bit ISA support (Power Architecture v2.06-compliant)
+ - Three levels of instructions: User, supervisor, and hypervisor
+ - Independent boot and reset
+ - Secure boot capability
+- 256 KB shared L3 CoreNet platform cache (CPC)
+- Interconnect CoreNet platform
+ - CoreNet coherency manager supporting coherent and noncoherent transactions
+ with prioritization and bandwidth allocation amongst CoreNet endpoints
+ - 150 Gbps coherent read bandwidth
+- 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving support
+- Data Path Acceleration Architecture (DPAA) incorporating acceleration for the following functions:
+ - Packet parsing, classification, and distribution
+ - Queue management for scheduling, packet sequencing, and congestion management
+ - Cryptography Acceleration (SEC 5.x)
+ - IEEE 1588 support
+ - Hardware buffer management for buffer allocation and deallocation
+ - MACSEC on DPAA-based Ethernet ports
+- Ethernet interfaces
+ - Four 1 Gbps Ethernet controllers
+- Parallel Ethernet interfaces
+ - Two RGMII interfaces
+- High speed peripheral interfaces
+ - Three PCI Express 2.0 controllers/ports running at up to 5 GHz
+ - One SATA controller supporting 1.5 and 3.0 Gb/s operation
+ - One QSGMII interface
+ - Four SGMII interface supporting 1000 Mbps
+ - Three SGMII interfaces supporting up to 2500 Mbps
+ - 10GbE XFI or 10Base-KR interface
+- Additional peripheral interfaces
+ - Two USB 2.0 controllers with integrated PHY
+ - SD/eSDHC/eMMC
+ - eSPI controller
+ - Four I2C controllers
+ - Four UARTs
+ - Four GPIO controllers
+ - Integrated flash controller (IFC)
+ - LCD interface (DIU) with 12 bit dual data rate
+- Multicore programmable interrupt controller (PIC)
+- Two 8-channel DMA engines
+- Single source clocking implementation
+- Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB)
+- QUICC Engine block
+ - 32-bit RISC controller for flexible support of the communications peripherals
+ - Serial DMA channel for receive and transmit on all serial channels
+ - Two universal communication controllers, supporting TDM, HDLC, and UART
+
+T1023 Personality
+------------------
+T1023 is a reduced personality of T1024 without QUICC Engine, DIU, and
+unavailable deep sleep. Rest of the blocks are almost same as T1024.
+Differences between T1024 and T1023
+Feature T1024 T1023
+QUICC Engine: yes no
+DIU: yes no
+Deep Sleep: yes no
+I2C controller: 4 3
+DDR: 64-bit 32-bit
+IFC: 32-bit 28-bit
+
+
+T1024QDS board Overview
+-----------------------
+- SERDES Connections
+ 4 lanes supporting the following:
+ - PCI Express: supports Gen 1 and Gen 2
+ - SGMII 1G and SGMII 2.5G
+ - QSGMII
+ - XFI
+ - SATA 2.0
+ - High-speed multiplexers route the SerDes traffic to appropriate slots or connectors.
+ - Aurora debug with dedicated connectors.
+- DDR Controller
+ - Supports up to 1600 MTPS data-rate.
+ - Supports one DDR4 or DDR3L module using DDR4 to DDR3L adapter card.
+ - Supports Single-, dual- or quad-rank DIMMs
+ - DDR power supplies 1.35V (DDR3L)/1.20V (DDR4) to all devices with automatic tracking of VTT.
+- IFC/Local Bus
+ - NAND Flash: 8-bit, async, up to 2GB
+ - NOR: 8-bit or 16-bit, non-multiplexed, up to 512MB
+ - NOR devices support 8 virtual banks
+ - Socketed to allow alternate devices
+ - GASIC: Simple (minimal) target within QIXIS FPGA
+ - PromJET rapid memory download support
+ - IFC Debug/Development card
+- Ethernet
+ - Two on-board RGMII 10M/100M/1G ethernet ports.
+ - One QSGMII interface
+ - Four SGMII interface supporting 1Gbps
+ - Three SGMII interfaces supporting 2.5Gbps
+ - one 10Gbps XFI or 10Base-KR interface
+- QIXIS System Logic FPGA
+ - Manages system power and reset sequencing.
+ - Manages the configurations of DUT, board, and clock for dynamic shmoo.
+ - Collects V-I-T data in background for code/power profiling.
+ - Supports legacy TMT test features (POSt, IRS, SYSCLK-synchronous assertion).
+ - General fault monitoring and logging.
+ - Powered from ATX 'standby' power supply that allows continuous operation while rest of the system is off.
+- Clocks
+ - System and DDR clock (SYSCLK, DDRCLK).
+ - Switch selectable to one of 16 common settings in the interval of 64 MHz-166 MHz.
+ - Software programmable in 1 MHz increments from 1-200 MHz.
+ - SERDES clocks
+ - Provides clocks to SerDes blocks and slots.
+ - 100 MHz, 125 MHz and 156.25 MHz options.
+ - Spread-spectrum option for 100 MHz.
+- Power Supplies
+ - Dedicated PMBus regulator for VDD and VDDC.
+ - Adjustable from 0.7V to 1.3V at 35A
+ - VDD can be disabled independanty from VDDC for “deep sleep”.
+ - DDR3L/DDR4 power supply for GVDD: 1.35 or 1.20V at up to 22A.
+ - VTT/MVREF automatically track operating voltage.
+ - Dedicated 2.5V VPP supply.
+ - Dedicated regulators/filters for AVDD supplies.
+ - Dedicated regulators for other supplies, for example OVDD, CVDD, DVDD, LVDD, POVDD, and EVDD.
+- Video
+ - DIU supports video up to 1280x1024x32 bpp.
+ - Chrontel CH7201 for HDMI connection.
+ - TI DS90C387R for direct LCD connection.
+ - Raw (not encoded) video connector for testing or other encoders.
+- USB
+ - Supports two USB 2.0 ports with integrated PHYs.
+ - Two type A ports with 5V@1.5A per port.
+ - Second port can be converted to OTG mini-AB.
+- SDHC
+ For T1024QDS, the SDHC port connects directly to an adapter card slot that has the following features:
+ - upport for optional clock feedback paths.
+ - Support for optional high-speed voltage translation direction controls.
+ - Support for SD slots for: SD, SDHC (1x, 4x, 8x) and MMC.
+ - Support for eMMC memory devices.
+- SPI
+ -On-board support of 3 different devices and sizes.
+- Other IO
+ - Two Serial ports
+ - ProfiBus port
+ - Four I2C ports
+
+
+Memory map on T1024QDS
+----------------------
+Start Address End Address Description Size
+0xF_FFDF_0000 0xF_FFDF_0FFF IFC - FPGA 4KB
+0xF_FF80_0000 0xF_FF80_FFFF IFC - NAND Flash 64KB
+0xF_FE00_0000 0xF_FEFF_FFFF CCSRBAR 16MB
+0xF_F802_0000 0xF_F802_FFFF PCI Express 3 I/O Space 64KB
+0xF_F801_0000 0xF_F801_FFFF PCI Express 2 I/O Space 64KB
+0xF_F800_0000 0xF_F800_FFFF PCI Express 1 I/O Space 64KB
+0xF_F600_0000 0xF_F7FF_FFFF Queue manager software portal 32MB
+0xF_F400_0000 0xF_F5FF_FFFF Buffer manager software portal 32MB
+0xF_E800_0000 0xF_EFFF_FFFF IFC - NOR Flash 128MB
+0xF_E000_0000 0xF_E7FF_FFFF Promjet 128MB
+0xF_0000_0000 0xF_003F_FFFF DCSR 4MB
+0xC_2000_0000 0xC_2FFF_FFFF PCI Express 3 Mem Space 256MB
+0xC_1000_0000 0xC_1FFF_FFFF PCI Express 2 Mem Space 256MB
+0xC_0000_0000 0xC_0FFF_FFFF PCI Express 1 Mem Space 256MB
+0x0_0000_0000 0x0_ffff_ffff DDR 4GB
+
+
+128MB NOR Flash memory Map
+--------------------------
+Start Address End Address Definition Max size
+0xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB
+0xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB
+0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB
+0xEFE00000 0xEFE3FFFF QE firmware (current bank) 256KB
+0xED300000 0xEFEFFFFF rootfs (alt bank) 44MB
+0xEC800000 0xEC8FFFFF Hardware device tree (alt bank) 1MB
+0xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB
+0xEC000000 0xEC01FFFF RCW (alt bank) 128KB
+0xEBF40000 0xEBFFFFFF u-boot (alt bank) 768KB
+0xEBF20000 0xEBF3FFFF u-boot env (alt bank) 128KB
+0xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB
+0xEBE00000 0xEBE3FFFF QE firmware (alt bank) 256KB
+0xE9300000 0xEBEFFFFF rootfs (current bank) 44MB
+0xE8800000 0xE88FFFFF Hardware device tree (cur bank) 1MB
+0xE8020000 0xE86FFFFF Linux.uImage (current bank) 7MB + 875KB
+0xE8000000 0xE801FFFF RCW (current bank) 128KB
+
+
+SerDes clock vs DIP-switch settings
+-----------------------------------
+SRDS_PRTCL_S1 SD1_REF_CLK1 SD1_REF_CLK2 SW4[1:4]
+0x6F 100MHz 125MHz 1101
+0xD6 100MHz 100MHz 1111
+0x99 156.25MHz 100MHz 1011
+
+
+T1024 Clock frequency
+----------------------
+BIN Core DDR Platform FMan
+Bin1: 1400MHz 1600MT/s 400MHz 700MHz
+Bin2: 1200MHz 1600MT/s 400MHz 600MHz
+Bin3: 1000MHz 1600MT/s 400MHz 500MHz
+
+
+
+Software configurations and board settings
+------------------------------------------
+1. NOR boot:
+ a. build NOR boot image
+ $ make T1024QDS_defconfig (For DDR3L, by default)
+ or make T1024QDS_D4_defconfig (For DDR4)
+ $ make
+ b. program u-boot.bin image to NOR flash
+ => tftp 1000000 u-boot.bin
+ => pro off all;era eff40000 efffffff;cp.b 1000000 eff40000 $filesize
+ set SW1[1:8] = '00010011', SW2[1] = '1', SW6[1:4] = '0000' for NOR boot
+
+ Switching between default bank0 and alternate bank4 on NOR flash
+ To change boot source to vbank4:
+ via software: run command 'qixis_reset altbank' in u-boot.
+ via DIP-switch: set SW6[1:4] = '0100'
+
+ To change boot source to vbank0:
+ via software: run command 'qixis_reset' in u-boot.
+ via DIP-Switch: set SW6[1:4] = '0000'
+
+2. NAND Boot:
+ a. build PBL image for NAND boot
+ $ make T1024QDS_NAND_defconfig
+ $ make
+ b. program u-boot-with-spl-pbl.bin to NAND flash
+ => tftp 1000000 u-boot-with-spl-pbl.bin
+ => nand erase 0 $filesize
+ => nand write 1000000 0 $filesize
+ set SW1[1:8] = '10000010', SW2[1] = '0' and SW6[1:4] = '1001' for NAND boot
+
+3. SPI Boot:
+ a. build PBL image for SPI boot
+ $ make T1024QDS_SPIFLASH_defconfig
+ $ make
+ b. program u-boot-with-spl-pbl.bin to SPI flash
+ => tftp 1000000 u-boot-with-spl-pbl.bin
+ => sf probe 0
+ => sf erase 0 f0000
+ => sf write 1000000 0 $filesize
+ set SW1[1:8] = '00100010', SW2[1] ='1' for SPI boot
+
+4. SD Boot:
+ a. build PBL image for SD boot
+ $ make T1024QDS_SDCARD_defconfig
+ $ make
+ b. program u-boot-with-spl-pbl.bin to SD/MMC card
+ => tftp 1000000 u-boot-with-spl-pbl.bin
+ => mmc write 1000000 8 0x800
+ => tftp 1000000 fsl_fman_ucode_t1024_xx.bin
+ => mmc write 1000000 0x820 80
+ set SW1[1:8] = '00100000', SW2[1] = '0' for SD boot
+
+
+DIU/QE-TDM/SDXC settings
+-------------------
+a) For TDM Riser: set pin_mux=tdm in hwconfig
+b) For UCC(ProfiBus): set pin_mux=ucc in hwconfig
+c) For HDMI(DVI): set pin_mux=hdmi in hwconfig
+d) For LCD(DFP): set pin_mux=lcd in hwconfig
+e) For SDXC: set adaptor=sdxc in hwconfig
+
+2-stage NAND/SPI/SD boot loader
+-------------------------------
+PBL initializes the internal CPC-SRAM and copy SPL(160K) to SRAM.
+SPL further initializes DDR using SPD and environment variables
+and copy u-boot(768 KB) from NAND/SPI/SD device to DDR.
+Finally SPL transers control to u-boot for futher booting.
+
+SPL has following features:
+ - Executes within 256K
+ - No relocation required
+
+Run time view of SPL framework
+-------------------------------------------------
+|Area | Address |
+-------------------------------------------------
+|SecureBoot header | 0xFFFC0000 (32KB) |
+-------------------------------------------------
+|GD, BD | 0xFFFC8000 (4KB) |
+-------------------------------------------------
+|ENV | 0xFFFC9000 (8KB) |
+-------------------------------------------------
+|HEAP | 0xFFFCB000 (30KB) |
+-------------------------------------------------
+|STACK | 0xFFFD8000 (22KB) |
+-------------------------------------------------
+|U-boot SPL | 0xFFFD8000 (160KB) |
+-------------------------------------------------
+
+NAND Flash memory Map on T1024QDS
+-------------------------------------------------------------
+Start End Definition Size
+0x000000 0x0FFFFF u-boot 1MB
+0x100000 0x15FFFF u-boot env 8KB
+0x160000 0x17FFFF FMAN Ucode 128KB
+0x180000 0x19FFFF QE Firmware 128KB
+
+
+SD Card memory Map on T1024QDS
+----------------------------------------------------
+Block #blocks Definition Size
+0x008 2048 u-boot img 1MB
+0x800 0016 u-boot env 8KB
+0x820 0256 FMAN Ucode 128KB
+0x920 0256 QE Firmware 128KB
+
+
+SPI Flash memory Map on T1024QDS
+----------------------------------------------------
+Start End Definition Size
+0x000000 0x0FFFFF u-boot img 1MB
+0x100000 0x101FFF u-boot env 8KB
+0x110000 0x12FFFF FMAN Ucode 128KB
+0x130000 0x14FFFF QE Firmware 128KB
+
+
+For more details, please refer to T1024QDS Reference Manual and access
+website www.freescale.com and Freescale QorIQ SDK Infocenter document.
diff --git a/board/freescale/t102xqds/ddr.c b/board/freescale/t102xqds/ddr.c
new file mode 100644
index 0000000..46fc64e
--- /dev/null
+++ b/board/freescale/t102xqds/ddr.c
@@ -0,0 +1,170 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <hwconfig.h>
+#include <asm/mmu.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
+#include <asm/fsl_law.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct board_specific_parameters {
+ u32 n_ranks;
+ u32 datarate_mhz_high;
+ u32 rank_gb;
+ u32 clk_adjust;
+ u32 wrlvl_start;
+ u32 wrlvl_ctl_2;
+ u32 wrlvl_ctl_3;
+};
+
+/*
+ * datarate_mhz_high values need to be in ascending order
+ */
+static const struct board_specific_parameters udimm0[] = {
+ /*
+ * memory controller 0
+ * num| hi| rank| clk| wrlvl | wrlvl | wrlvl |
+ * ranks| mhz| GB |adjst| start | ctl2 | ctl3 |
+ */
+#if defined(CONFIG_SYS_FSL_DDR4)
+ {2, 1666, 0, 4, 7, 0x0808090B, 0x0C0D0E0A,},
+ {2, 1900, 0, 4, 6, 0x08080A0C, 0x0D0E0F0A,},
+ {1, 1666, 0, 4, 6, 0x0708090B, 0x0C0D0E09,},
+ {1, 1900, 0, 4, 6, 0x08080A0C, 0x0D0E0F0A,},
+ {1, 2200, 0, 4, 7, 0x08090A0D, 0x0F0F100C,},
+#elif defined(CONFIG_SYS_FSL_DDR3)
+ {2, 833, 0, 4, 6, 0x06060607, 0x08080807,},
+ {2, 1350, 0, 4, 7, 0x0708080A, 0x0A0B0C09,},
+ {2, 1666, 0, 4, 7, 0x0808090B, 0x0C0D0E0A,},
+ {1, 833, 0, 4, 6, 0x06060607, 0x08080807,},
+ {1, 1350, 0, 4, 7, 0x0708080A, 0x0A0B0C09,},
+ {1, 1666, 0, 4, 7, 0x0808090B, 0x0C0D0E0A,},
+#else
+#error DDR type not defined
+#endif
+ {}
+};
+
+static const struct board_specific_parameters *udimms[] = {
+ udimm0,
+};
+
+void fsl_ddr_board_options(memctl_options_t *popts,
+ dimm_params_t *pdimm,
+ unsigned int ctrl_num)
+{
+ const struct board_specific_parameters *pbsp, *pbsp_highest = NULL;
+ ulong ddr_freq;
+ struct cpu_type *cpu = gd->arch.cpu;
+
+ if (ctrl_num > 2) {
+ printf("Not supported controller number %d\n", ctrl_num);
+ return;
+ }
+ if (!pdimm->n_ranks)
+ return;
+
+ pbsp = udimms[0];
+
+ /* Get clk_adjust according to the board ddr freqency and n_banks
+ * specified in board_specific_parameters table.
+ */
+ ddr_freq = get_ddr_freq(0) / 1000000;
+ while (pbsp->datarate_mhz_high) {
+ if (pbsp->n_ranks == pdimm->n_ranks &&
+ (pdimm->rank_density >> 30) >= pbsp->rank_gb) {
+ if (ddr_freq <= pbsp->datarate_mhz_high) {
+ popts->clk_adjust = pbsp->clk_adjust;
+ popts->wrlvl_start = pbsp->wrlvl_start;
+ popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
+ popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
+ goto found;
+ }
+ pbsp_highest = pbsp;
+ }
+ pbsp++;
+ }
+
+ if (pbsp_highest) {
+ printf("Error: board specific timing not found\n");
+ printf("for data rate %lu MT/s\n", ddr_freq);
+ printf("Trying to use the highest speed (%u) parameters\n",
+ pbsp_highest->datarate_mhz_high);
+ popts->clk_adjust = pbsp_highest->clk_adjust;
+ popts->wrlvl_start = pbsp_highest->wrlvl_start;
+ popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
+ popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
+ } else {
+ panic("DIMM is not supported by this board");
+ }
+found:
+ debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n",
+ pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb);
+ debug("\tclk_adjust %d, wrlvl_start %d, wrlvl_ctrl_2 0x%x, ",
+ pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2);
+ debug("wrlvl_ctrl_3 0x%x\n", pbsp->wrlvl_ctl_3);
+
+ /*
+ * Factors to consider for half-strength driver enable:
+ * - number of DIMMs installed
+ */
+ popts->half_strength_driver_enable = 1;
+ /*
+ * Write leveling override
+ */
+ popts->wrlvl_override = 1;
+ popts->wrlvl_sample = 0xf;
+
+ /*
+ * rtt and rtt_wr override
+ */
+ popts->rtt_override = 0;
+
+ /* Enable ZQ calibration */
+ popts->zq_en = 1;
+
+ /* DHC_EN =1, ODT = 75 Ohm */
+#ifdef CONFIG_SYS_FSL_DDR4
+ popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_80ohm);
+ popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_80ohm) |
+ DDR_CDR2_VREF_OVRD(70); /* Vref = 70% */
+#else
+ popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm);
+ popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm);
+#endif
+
+ /* T1023 supports max DDR bus 32bit width, T1024 supports DDR 64bit,
+ * set DDR bus width to 32bit for T1023
+ */
+ if (cpu->soc_ver == SVR_T1023)
+ popts->data_bus_width = DDR_DATA_BUS_WIDTH_32;
+
+#ifdef CONFIG_FORCE_DDR_DATA_BUS_WIDTH_32
+ /* for DDR bus 32bit test on T1024 */
+ popts->data_bus_width = DDR_DATA_BUS_WIDTH_32;
+#endif
+}
+
+phys_size_t initdram(int board_type)
+{
+ phys_size_t dram_size;
+
+#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_RAMBOOT_PBL)
+ puts("Initializing....using SPD\n");
+
+ dram_size = fsl_ddr_sdram();
+ dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+ dram_size *= 0x100000;
+#else
+ /* DDR has been initialised by first stage boot loader */
+ dram_size = fsl_ddr_sdram_size();
+#endif
+ return dram_size;
+}
diff --git a/board/freescale/t102xqds/eth_t102xqds.c b/board/freescale/t102xqds/eth_t102xqds.c
new file mode 100644
index 0000000..7723f58
--- /dev/null
+++ b/board/freescale/t102xqds/eth_t102xqds.c
@@ -0,0 +1,442 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * Shengzhou Liu <Shengzhou.Liu@freescale.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <netdev.h>
+#include <asm/mmu.h>
+#include <asm/processor.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_law.h>
+#include <asm/fsl_serdes.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+#include <malloc.h>
+#include <fm_eth.h>
+#include <fsl_mdio.h>
+#include <miiphy.h>
+#include <phy.h>
+#include <asm/fsl_dtsec.h>
+#include <asm/fsl_serdes.h>
+#include "../common/qixis.h"
+#include "../common/fman.h"
+#include "t102xqds_qixis.h"
+
+#define EMI_NONE 0xFFFFFFFF
+#define EMI1_RGMII1 0
+#define EMI1_RGMII2 1
+#define EMI1_SLOT1 2
+#define EMI1_SLOT2 3
+#define EMI1_SLOT3 4
+#define EMI1_SLOT4 5
+#define EMI1_SLOT5 6
+#define EMI2 7
+
+static int mdio_mux[NUM_FM_PORTS];
+
+static const char * const mdio_names[] = {
+ "T1024QDS_MDIO_RGMII1",
+ "T1024QDS_MDIO_RGMII2",
+ "T1024QDS_MDIO_SLOT1",
+ "T1024QDS_MDIO_SLOT2",
+ "T1024QDS_MDIO_SLOT3",
+ "T1024QDS_MDIO_SLOT4",
+ "T1024QDS_MDIO_SLOT5",
+ "T1024QDS_MDIO_10GC",
+ "NULL",
+};
+
+/* Map SerDes1 4 lanes to default slot, will be initialized dynamically */
+static u8 lane_to_slot[] = {2, 3, 4, 5};
+
+static const char *t1024qds_mdio_name_for_muxval(u8 muxval)
+{
+ return mdio_names[muxval];
+}
+
+struct mii_dev *mii_dev_for_muxval(u8 muxval)
+{
+ struct mii_dev *bus;
+ const char *name;
+
+ if (muxval > EMI2)
+ return NULL;
+
+ name = t1024qds_mdio_name_for_muxval(muxval);
+
+ if (!name) {
+ printf("No bus for muxval %x\n", muxval);
+ return NULL;
+ }
+
+ bus = miiphy_get_dev_by_name(name);
+
+ if (!bus) {
+ printf("No bus by name %s\n", name);
+ return NULL;
+ }
+
+ return bus;
+}
+
+struct t1024qds_mdio {
+ u8 muxval;
+ struct mii_dev *realbus;
+};
+
+static void t1024qds_mux_mdio(u8 muxval)
+{
+ u8 brdcfg4;
+
+ if (muxval < 7) {
+ brdcfg4 = QIXIS_READ(brdcfg[4]);
+ brdcfg4 &= ~BRDCFG4_EMISEL_MASK;
+ brdcfg4 |= (muxval << BRDCFG4_EMISEL_SHIFT);
+ QIXIS_WRITE(brdcfg[4], brdcfg4);
+ }
+}
+
+static int t1024qds_mdio_read(struct mii_dev *bus, int addr, int devad,
+ int regnum)
+{
+ struct t1024qds_mdio *priv = bus->priv;
+
+ t1024qds_mux_mdio(priv->muxval);
+
+ return priv->realbus->read(priv->realbus, addr, devad, regnum);
+}
+
+static int t1024qds_mdio_write(struct mii_dev *bus, int addr, int devad,
+ int regnum, u16 value)
+{
+ struct t1024qds_mdio *priv = bus->priv;
+
+ t1024qds_mux_mdio(priv->muxval);
+
+ return priv->realbus->write(priv->realbus, addr, devad, regnum, value);
+}
+
+static int t1024qds_mdio_reset(struct mii_dev *bus)
+{
+ struct t1024qds_mdio *priv = bus->priv;
+
+ return priv->realbus->reset(priv->realbus);
+}
+
+static int t1024qds_mdio_init(char *realbusname, u8 muxval)
+{
+ struct t1024qds_mdio *pmdio;
+ struct mii_dev *bus = mdio_alloc();
+
+ if (!bus) {
+ printf("Failed to allocate t1024qds MDIO bus\n");
+ return -1;
+ }
+
+ pmdio = malloc(sizeof(*pmdio));
+ if (!pmdio) {
+ printf("Failed to allocate t1024qds private data\n");
+ free(bus);
+ return -1;
+ }
+
+ bus->read = t1024qds_mdio_read;
+ bus->write = t1024qds_mdio_write;
+ bus->reset = t1024qds_mdio_reset;
+ sprintf(bus->name, t1024qds_mdio_name_for_muxval(muxval));
+
+ pmdio->realbus = miiphy_get_dev_by_name(realbusname);
+
+ if (!pmdio->realbus) {
+ printf("No bus with name %s\n", realbusname);
+ free(bus);
+ free(pmdio);
+ return -1;
+ }
+
+ pmdio->muxval = muxval;
+ bus->priv = pmdio;
+ return mdio_register(bus);
+}
+
+void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
+ enum fm_port port, int offset)
+{
+ struct fixed_link f_link;
+
+ if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_RGMII) {
+ if (port == FM1_DTSEC3) {
+ fdt_set_phy_handle(fdt, compat, addr, "rgmii_phy2");
+ fdt_setprop(fdt, offset, "phy-connection-type",
+ "rgmii", 5);
+ fdt_status_okay_by_alias(fdt, "emi1_rgmii1");
+ }
+ } else if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII) {
+ if (port == FM1_DTSEC1) {
+ fdt_set_phy_handle(fdt, compat, addr,
+ "sgmii_vsc8234_phy_s5");
+ } else if (port == FM1_DTSEC2) {
+ fdt_set_phy_handle(fdt, compat, addr,
+ "sgmii_vsc8234_phy_s4");
+ }
+ } else if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII_2500) {
+ if (port == FM1_DTSEC3) {
+ fdt_set_phy_handle(fdt, compat, addr,
+ "sgmii_aqr105_phy_s3");
+ }
+ } else if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_QSGMII) {
+ switch (port) {
+ case FM1_DTSEC1:
+ fdt_set_phy_handle(fdt, compat, addr, "qsgmii_phy_p1");
+ break;
+ case FM1_DTSEC2:
+ fdt_set_phy_handle(fdt, compat, addr, "qsgmii_phy_p2");
+ break;
+ case FM1_DTSEC3:
+ fdt_set_phy_handle(fdt, compat, addr, "qsgmii_phy_p3");
+ break;
+ case FM1_DTSEC4:
+ fdt_set_phy_handle(fdt, compat, addr, "qsgmii_phy_p4");
+ break;
+ default:
+ break;
+ }
+ fdt_delprop(fdt, offset, "phy-connection-type");
+ fdt_setprop(fdt, offset, "phy-connection-type", "qsgmii", 6);
+ fdt_status_okay_by_alias(fdt, "emi1_slot2");
+ } else if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_XGMII) {
+ /* XFI interface */
+ f_link.phy_id = port;
+ f_link.duplex = 1;
+ f_link.link_speed = 10000;
+ f_link.pause = 0;
+ f_link.asym_pause = 0;
+ /* no PHY for XFI */
+ fdt_delprop(fdt, offset, "phy-handle");
+ fdt_setprop(fdt, offset, "fixed-link", &f_link, sizeof(f_link));
+ fdt_setprop(fdt, offset, "phy-connection-type", "xgmii", 5);
+ }
+}
+
+void fdt_fixup_board_enet(void *fdt)
+{
+}
+
+/*
+ * This function reads RCW to check if Serdes1{A:D} is configured
+ * to slot 1/2/3/4/5 and update the lane_to_slot[] array accordingly
+ */
+static void initialize_lane_to_slot(void)
+{
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 srds_s1 = in_be32(&gur->rcwsr[4]) &
+ FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
+
+ srds_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
+
+ switch (srds_s1) {
+ case 0x46:
+ case 0x47:
+ lane_to_slot[1] = 2;
+ break;
+ default:
+ break;
+ }
+}
+
+int board_eth_init(bd_t *bis)
+{
+#if defined(CONFIG_FMAN_ENET)
+ int i, idx, lane, slot, interface;
+ struct memac_mdio_info dtsec_mdio_info;
+ struct memac_mdio_info tgec_mdio_info;
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 srds_s1;
+
+ srds_s1 = in_be32(&gur->rcwsr[4]) &
+ FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
+ srds_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
+
+ initialize_lane_to_slot();
+
+ /* Initialize the mdio_mux array so we can recognize empty elements */
+ for (i = 0; i < NUM_FM_PORTS; i++)
+ mdio_mux[i] = EMI_NONE;
+
+ dtsec_mdio_info.regs =
+ (struct memac_mdio_controller *)CONFIG_SYS_FM1_DTSEC_MDIO_ADDR;
+
+ dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME;
+
+ /* Register the 1G MDIO bus */
+ fm_memac_mdio_init(bis, &dtsec_mdio_info);
+
+ tgec_mdio_info.regs =
+ (struct memac_mdio_controller *)CONFIG_SYS_FM1_TGEC_MDIO_ADDR;
+ tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME;
+
+ /* Register the 10G MDIO bus */
+ fm_memac_mdio_init(bis, &tgec_mdio_info);
+
+ /* Register the muxing front-ends to the MDIO buses */
+ t1024qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII1);
+ t1024qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII2);
+ t1024qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT1);
+ t1024qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT2);
+ t1024qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT3);
+ t1024qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT4);
+ t1024qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT5);
+ t1024qds_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME, EMI2);
+
+ /* Set the two on-board RGMII PHY address */
+ fm_info_set_phy_address(FM1_DTSEC3, RGMII_PHY2_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC4, RGMII_PHY1_ADDR);
+
+ switch (srds_s1) {
+ case 0xd5:
+ case 0xd6:
+ /* QSGMII in Slot2 */
+ fm_info_set_phy_address(FM1_DTSEC1, 0x8);
+ fm_info_set_phy_address(FM1_DTSEC2, 0x9);
+ fm_info_set_phy_address(FM1_DTSEC3, 0xa);
+ fm_info_set_phy_address(FM1_DTSEC4, 0xb);
+ break;
+ case 0x95:
+ case 0x99:
+ /*
+ * XFI does not need a PHY to work, but to avoid U-boot use
+ * default PHY address which is zero to a MAC when it found
+ * a MAC has no PHY address, we give a PHY address to XFI
+ * MAC, and should not use a real XAUI PHY address, since
+ * MDIO can access it successfully, and then MDIO thinks the
+ * XAUI card is used for the XFI MAC, which will cause error.
+ */
+ fm_info_set_phy_address(FM1_10GEC1, 4);
+ fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT1_PHY_ADDR);
+ break;
+ case 0x6f:
+ /* SGMII in Slot3, Slot4, Slot5 */
+ fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_AQ_PHY_ADDR_S5);
+ fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_AQ_PHY_ADDR_S4);
+ fm_info_set_phy_address(FM1_DTSEC3, SGMII_CARD_PORT1_PHY_ADDR);
+ break;
+ case 0x7f:
+ fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_AQ_PHY_ADDR_S5);
+ fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_AQ_PHY_ADDR_S4);
+ fm_info_set_phy_address(FM1_DTSEC3, SGMII_CARD_AQ_PHY_ADDR_S3);
+ break;
+ case 0x47:
+ fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR);
+ break;
+ case 0x77:
+ fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC3, SGMII_CARD_AQ_PHY_ADDR_S3);
+ break;
+ case 0x5a:
+ fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT1_PHY_ADDR);
+ break;
+ case 0x6a:
+ fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT1_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC3, SGMII_CARD_PORT1_PHY_ADDR);
+ break;
+ case 0x5b:
+ fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT1_PHY_ADDR);
+ break;
+ case 0x6b:
+ fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT1_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC3, SGMII_CARD_PORT1_PHY_ADDR);
+ break;
+ default:
+ break;
+ }
+
+ for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
+ idx = i - FM1_DTSEC1;
+ interface = fm_info_get_enet_if(i);
+ switch (interface) {
+ case PHY_INTERFACE_MODE_SGMII:
+ case PHY_INTERFACE_MODE_SGMII_2500:
+ case PHY_INTERFACE_MODE_QSGMII:
+ if (interface == PHY_INTERFACE_MODE_SGMII) {
+ lane = serdes_get_first_lane(FSL_SRDS_1,
+ SGMII_FM1_DTSEC1 + idx);
+ } else if (interface == PHY_INTERFACE_MODE_SGMII_2500) {
+ lane = serdes_get_first_lane(FSL_SRDS_1,
+ SGMII_2500_FM1_DTSEC1 + idx);
+ } else {
+ lane = serdes_get_first_lane(FSL_SRDS_1,
+ QSGMII_FM1_A);
+ }
+
+ if (lane < 0)
+ break;
+
+ slot = lane_to_slot[lane];
+ debug("FM1@DTSEC%u expects SGMII in slot %u\n",
+ idx + 1, slot);
+ if (QIXIS_READ(present2) & (1 << (slot - 1)))
+ fm_disable_port(i);
+
+ switch (slot) {
+ case 2:
+ mdio_mux[i] = EMI1_SLOT2;
+ fm_info_set_mdio(i, mii_dev_for_muxval(
+ mdio_mux[i]));
+ break;
+ case 3:
+ mdio_mux[i] = EMI1_SLOT3;
+ fm_info_set_mdio(i, mii_dev_for_muxval(
+ mdio_mux[i]));
+ break;
+ case 4:
+ mdio_mux[i] = EMI1_SLOT4;
+ fm_info_set_mdio(i, mii_dev_for_muxval(
+ mdio_mux[i]));
+ break;
+ case 5:
+ mdio_mux[i] = EMI1_SLOT5;
+ fm_info_set_mdio(i, mii_dev_for_muxval(
+ mdio_mux[i]));
+ break;
+ }
+ break;
+ case PHY_INTERFACE_MODE_RGMII:
+ if (i == FM1_DTSEC3)
+ mdio_mux[i] = EMI1_RGMII2;
+ else if (i == FM1_DTSEC4)
+ mdio_mux[i] = EMI1_RGMII1;
+ fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
+ break;
+ default:
+ break;
+ }
+ }
+
+ for (i = FM1_10GEC1; i < FM1_10GEC1 + CONFIG_SYS_NUM_FM1_10GEC; i++) {
+ idx = i - FM1_10GEC1;
+ switch (fm_info_get_enet_if(i)) {
+ case PHY_INTERFACE_MODE_XGMII:
+ lane = serdes_get_first_lane(FSL_SRDS_1,
+ XFI_FM1_MAC1 + idx);
+ if (lane < 0)
+ break;
+ mdio_mux[i] = EMI2;
+ fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
+ break;
+ default:
+ break;
+ }
+ }
+
+ cpu_eth_init(bis);
+#endif /* CONFIG_FMAN_ENET */
+
+ return pci_eth_init(bis);
+}
diff --git a/board/freescale/t102xqds/law.c b/board/freescale/t102xqds/law.c
new file mode 100644
index 0000000..b1c9d01
--- /dev/null
+++ b/board/freescale/t102xqds/law.c
@@ -0,0 +1,32 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+struct law_entry law_table[] = {
+#ifndef CONFIG_SYS_NO_FLASH
+ SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_IFC),
+#endif
+#ifdef CONFIG_SYS_BMAN_MEM_PHYS
+ SET_LAW(CONFIG_SYS_BMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_BMAN),
+#endif
+#ifdef CONFIG_SYS_QMAN_MEM_PHYS
+ SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN),
+#endif
+#ifdef QIXIS_BASE_PHYS
+ SET_LAW(QIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC),
+#endif
+#ifdef CONFIG_SYS_DCSRBAR_PHYS
+ SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_DCSR),
+#endif
+#ifdef CONFIG_SYS_NAND_BASE_PHYS
+ SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_IFC),
+#endif
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/t102xqds/pci.c b/board/freescale/t102xqds/pci.c
new file mode 100644
index 0000000..7369289
--- /dev/null
+++ b/board/freescale/t102xqds/pci.c
@@ -0,0 +1,23 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <pci.h>
+#include <asm/fsl_pci.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <asm/fsl_serdes.h>
+
+void pci_init_board(void)
+{
+ fsl_pcie_init_board(0);
+}
+
+void pci_of_setup(void *blob, bd_t *bd)
+{
+ FT_FSL_PCI_SETUP;
+}
diff --git a/board/freescale/t102xqds/spl.c b/board/freescale/t102xqds/spl.c
new file mode 100644
index 0000000..08aef6e
--- /dev/null
+++ b/board/freescale/t102xqds/spl.c
@@ -0,0 +1,151 @@
+/* Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <ns16550.h>
+#include <nand.h>
+#include <i2c.h>
+#include <mmc.h>
+#include <fsl_esdhc.h>
+#include <spi_flash.h>
+#include "../common/qixis.h"
+#include "t102xqds_qixis.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+phys_size_t get_effective_memsize(void)
+{
+ return CONFIG_SYS_L3_SIZE;
+}
+
+unsigned long get_board_sys_clk(void)
+{
+ u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
+
+ switch (sysclk_conf & 0x0F) {
+ case QIXIS_SYSCLK_83:
+ return 83333333;
+ case QIXIS_SYSCLK_100:
+ return 100000000;
+ case QIXIS_SYSCLK_125:
+ return 125000000;
+ case QIXIS_SYSCLK_133:
+ return 133333333;
+ case QIXIS_SYSCLK_150:
+ return 150000000;
+ case QIXIS_SYSCLK_160:
+ return 160000000;
+ case QIXIS_SYSCLK_166:
+ return 166666666;
+ }
+ return 66666666;
+}
+
+unsigned long get_board_ddr_clk(void)
+{
+ u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);
+
+ switch ((ddrclk_conf & 0x30) >> 4) {
+ case QIXIS_DDRCLK_100:
+ return 100000000;
+ case QIXIS_DDRCLK_125:
+ return 125000000;
+ case QIXIS_DDRCLK_133:
+ return 133333333;
+ }
+ return 66666666;
+}
+
+void board_init_f(ulong bootflag)
+{
+ u32 plat_ratio, sys_clk, ccb_clk;
+ ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+
+#if defined(CONFIG_PPC_T1040) && defined(CONFIG_SPL_NAND_BOOT)
+ /*
+ * There is T1040 SoC issue where NOR, FPGA are inaccessible during
+ * NAND boot because IFC signals > IFC_AD7 are not enabled.
+ * This workaround changes RCW source to make all signals enabled.
+ */
+ u32 porsr1, pinctl;
+#define FSL_CORENET_CCSR_PORSR1_RCW_MASK 0xFF800000
+
+ porsr1 = in_be32(&gur->porsr1);
+ pinctl = ((porsr1 & ~(FSL_CORENET_CCSR_PORSR1_RCW_MASK)) | 0x24800000);
+ out_be32((unsigned int *)(CONFIG_SYS_DCSRBAR + 0x20000), pinctl);
+#endif
+
+ /* Memcpy existing GD at CONFIG_SPL_GD_ADDR */
+ memcpy((void *)CONFIG_SPL_GD_ADDR, (void *)gd, sizeof(gd_t));
+
+ /* Update GD pointer */
+ gd = (gd_t *)(CONFIG_SPL_GD_ADDR);
+
+ console_init_f();
+
+ /* initialize selected port with appropriate baud rate */
+ sys_clk = get_board_sys_clk();
+ plat_ratio = (in_be32(&gur->rcwsr[0]) >> 25) & 0x1f;
+ ccb_clk = sys_clk * plat_ratio / 2;
+
+ NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
+ ccb_clk / 16 / CONFIG_BAUDRATE);
+
+#if defined(CONFIG_SPL_MMC_BOOT)
+ puts("\nSD boot...\n");
+#elif defined(CONFIG_SPL_SPI_BOOT)
+ puts("\nSPI boot...\n");
+#elif defined(CONFIG_SPL_NAND_BOOT)
+ puts("\nNAND boot...\n");
+#endif
+
+ relocate_code(CONFIG_SPL_RELOC_STACK, (gd_t *)CONFIG_SPL_GD_ADDR, 0x0);
+}
+
+void board_init_r(gd_t *gd, ulong dest_addr)
+{
+ bd_t *bd;
+
+ bd = (bd_t *)(gd + sizeof(gd_t));
+ memset(bd, 0, sizeof(bd_t));
+ gd->bd = bd;
+ bd->bi_memstart = CONFIG_SYS_INIT_L3_ADDR;
+ bd->bi_memsize = CONFIG_SYS_L3_SIZE;
+
+ probecpu();
+ get_clocks();
+ mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
+ CONFIG_SPL_RELOC_MALLOC_SIZE);
+
+#ifdef CONFIG_SPL_NAND_BOOT
+ nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
+ (uchar *)CONFIG_ENV_ADDR);
+#endif
+#ifdef CONFIG_SPL_MMC_BOOT
+ mmc_initialize(bd);
+ mmc_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
+ (uchar *)CONFIG_ENV_ADDR);
+#endif
+#ifdef CONFIG_SPL_SPI_BOOT
+ spi_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
+ (uchar *)CONFIG_ENV_ADDR);
+#endif
+
+ gd->env_addr = (ulong)(CONFIG_ENV_ADDR);
+ gd->env_valid = 1;
+
+ i2c_init_all();
+
+ gd->ram_size = initdram(0);
+
+#ifdef CONFIG_SPL_MMC_BOOT
+ mmc_boot();
+#elif defined(CONFIG_SPL_SPI_BOOT)
+ spi_boot();
+#elif defined(CONFIG_SPL_NAND_BOOT)
+ nand_boot();
+#endif
+}
diff --git a/board/freescale/t102xqds/t1024_pbi.cfg b/board/freescale/t102xqds/t1024_pbi.cfg
new file mode 100644
index 0000000..7b9e9b0
--- /dev/null
+++ b/board/freescale/t102xqds/t1024_pbi.cfg
@@ -0,0 +1,26 @@
+#PBI commands
+#Initialize CPC1
+09010000 00200400
+09138000 00000000
+091380c0 00000100
+#Configure CPC1 as 256KB SRAM
+09010100 00000000
+09010104 fffc0007
+09010f00 08000000
+09010000 80000000
+#Configure LAW for CPC1
+09000cd0 00000000
+09000cd4 fffc0000
+09000cd8 81000011
+#Configure alternate space
+09000010 00000000
+09000014 ff000000
+09000018 81000000
+#Configure SPI controller
+09110000 80000403
+09110020 2d170008
+09110024 00100008
+09110028 00100008
+0911002c 00100008
+#Flush PBL data
+091380c0 000FFFFF
diff --git a/board/freescale/t102xqds/t1024_rcw.cfg b/board/freescale/t102xqds/t1024_rcw.cfg
new file mode 100644
index 0000000..4b8f719
--- /dev/null
+++ b/board/freescale/t102xqds/t1024_rcw.cfg
@@ -0,0 +1,10 @@
+# single-source clock:Sys_Clock = DDR_Refclock = Diff_Sysclk = 100 MHz
+# Core/DDR/Platform/FMan = 1400MHz/1600MT/s/400MHz/700MHz
+
+# PBL preamble and RCW header for T1024QDS
+aa55aa55 010e0100
+# Serdes protocol 0x6F
+0810000e 00000000 00000000 00000000
+37800001 00000012 e8104000 21000000
+00000000 00000000 00000000 00030810
+00000000 036c5a00 00000000 00000006
diff --git a/board/freescale/t102xqds/t102xqds.c b/board/freescale/t102xqds/t102xqds.c
new file mode 100644
index 0000000..f3141b5
--- /dev/null
+++ b/board/freescale/t102xqds/t102xqds.c
@@ -0,0 +1,408 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <i2c.h>
+#include <netdev.h>
+#include <linux/compiler.h>
+#include <asm/mmu.h>
+#include <asm/processor.h>
+#include <asm/cache.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_law.h>
+#include <asm/fsl_serdes.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+#include <fm_eth.h>
+#include <hwconfig.h>
+#include <asm/mpc85xx_gpio.h>
+#include "../common/qixis.h"
+#include "t102xqds.h"
+#include "t102xqds_qixis.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkboard(void)
+{
+ char buf[64];
+ struct cpu_type *cpu = gd->arch.cpu;
+ static const char *const freq[] = {"100", "125", "156.25", "100.0"};
+ int clock;
+ u8 sw = QIXIS_READ(arch);
+
+ printf("Board: %sQDS, ", cpu->name);
+ printf("Sys ID: 0x%02x, Board Arch: V%d, ", QIXIS_READ(id), sw >> 4);
+ printf("Board Version: %c, boot from ", (sw & 0xf) + 'A' - 1);
+
+#ifdef CONFIG_SDCARD
+ puts("SD/MMC\n");
+#elif CONFIG_SPIFLASH
+ puts("SPI\n");
+#else
+ sw = QIXIS_READ(brdcfg[0]);
+ sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
+
+ if (sw < 0x8)
+ printf("vBank: %d\n", sw);
+ else if (sw == 0x8)
+ puts("PromJet\n");
+ else if (sw == 0x9)
+ puts("NAND\n");
+ else if (sw == 0x15)
+ printf("IFC Card\n");
+ else
+ printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
+#endif
+
+ printf("FPGA: v%d (%s), build %d",
+ (int)QIXIS_READ(scver), qixis_read_tag(buf),
+ (int)qixis_read_minor());
+ /* the timestamp string contains "\n" at the end */
+ printf(" on %s", qixis_read_time(buf));
+
+ puts("SERDES Reference: ");
+ sw = QIXIS_READ(brdcfg[2]);
+ clock = (sw >> 6) & 3;
+ printf("Clock1=%sMHz ", freq[clock]);
+ clock = (sw >> 4) & 3;
+ printf("Clock2=%sMHz\n", freq[clock]);
+
+ return 0;
+}
+
+int select_i2c_ch_pca9547(u8 ch)
+{
+ int ret;
+
+ ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
+ if (ret) {
+ puts("PCA: failed to select proper channel\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int board_mux_lane_to_slot(void)
+{
+ ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 srds_prtcl_s1;
+ u8 brdcfg9;
+
+ srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) &
+ FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
+ srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
+
+
+ brdcfg9 = QIXIS_READ(brdcfg[9]);
+ QIXIS_WRITE(brdcfg[9], brdcfg9 | BRDCFG9_XFI_TX_DISABLE);
+
+ switch (srds_prtcl_s1) {
+ case 0:
+ /* SerDes1 is not enabled */
+ break;
+ case 0xd5:
+ case 0x5b:
+ case 0x6b:
+ case 0x77:
+ case 0x6f:
+ case 0x7f:
+ QIXIS_WRITE(brdcfg[12], 0x8c);
+ break;
+ case 0x40:
+ QIXIS_WRITE(brdcfg[12], 0xfc);
+ break;
+ case 0xd6:
+ case 0x5a:
+ case 0x6a:
+ case 0x56:
+ QIXIS_WRITE(brdcfg[12], 0x88);
+ break;
+ case 0x47:
+ QIXIS_WRITE(brdcfg[12], 0xcc);
+ break;
+ case 0x46:
+ QIXIS_WRITE(brdcfg[12], 0xc8);
+ break;
+ case 0x95:
+ case 0x99:
+ brdcfg9 &= ~BRDCFG9_XFI_TX_DISABLE;
+ QIXIS_WRITE(brdcfg[9], brdcfg9);
+ QIXIS_WRITE(brdcfg[12], 0x8c);
+ break;
+ case 0x116:
+ QIXIS_WRITE(brdcfg[12], 0x00);
+ break;
+ case 0x115:
+ case 0x119:
+ case 0x129:
+ case 0x12b:
+ /* Aurora, PCIe, SGMII, SATA */
+ QIXIS_WRITE(brdcfg[12], 0x04);
+ break;
+ default:
+ printf("WARNING: unsupported for SerDes Protocol %d\n",
+ srds_prtcl_s1);
+ return -1;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_PPC_T1024
+static void board_mux_setup(void)
+{
+ u8 brdcfg15;
+
+ brdcfg15 = QIXIS_READ(brdcfg[15]);
+ brdcfg15 &= ~BRDCFG15_DIUSEL_MASK;
+
+ if (hwconfig_arg_cmp("pin_mux", "tdm")) {
+ /* Route QE_TDM multiplexed signals to TDM Riser slot */
+ QIXIS_WRITE(brdcfg[15], brdcfg15 | BRDCFG15_DIUSEL_TDM);
+ QIXIS_WRITE(brdcfg[13], BRDCFG13_TDM_INTERFACE << 2);
+ QIXIS_WRITE(brdcfg[5], (QIXIS_READ(brdcfg[5]) &
+ ~BRDCFG5_SPIRTE_MASK) | BRDCFG5_SPIRTE_TDM);
+ } else if (hwconfig_arg_cmp("pin_mux", "ucc")) {
+ /* to UCC (ProfiBus) interface */
+ QIXIS_WRITE(brdcfg[15], brdcfg15 | BRDCFG15_DIUSEL_UCC);
+ } else if (hwconfig_arg_cmp("pin_mux", "hdmi")) {
+ /* to DVI (HDMI) encoder */
+ QIXIS_WRITE(brdcfg[15], brdcfg15 | BRDCFG15_DIUSEL_HDMI);
+ } else if (hwconfig_arg_cmp("pin_mux", "lcd")) {
+ /* to DFP (LCD) encoder */
+ QIXIS_WRITE(brdcfg[15], brdcfg15 | BRDCFG15_LCDFM |
+ BRDCFG15_LCDPD | BRDCFG15_DIUSEL_LCD);
+ }
+
+ if (hwconfig_arg_cmp("adaptor", "sdxc"))
+ /* Route SPI_CS multiplexed signals to SD slot */
+ QIXIS_WRITE(brdcfg[5], (QIXIS_READ(brdcfg[5]) &
+ ~BRDCFG5_SPIRTE_MASK) | BRDCFG5_SPIRTE_SDHC);
+}
+#endif
+
+void board_retimer_ds125df111_init(void)
+{
+ u8 reg;
+
+ /* Retimer DS125DF111 is connected to I2C1_CH7_CH5 */
+ reg = I2C_MUX_CH7;
+ i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &reg, 1);
+ reg = I2C_MUX_CH5;
+ i2c_write(I2C_MUX_PCA_ADDR_SEC, 0, 1, &reg, 1);
+
+ /* Access to Control/Shared register */
+ reg = 0x0;
+ i2c_write(I2C_RETIMER_ADDR, 0xff, 1, &reg, 1);
+
+ /* Read device revision and ID */
+ i2c_read(I2C_RETIMER_ADDR, 1, 1, &reg, 1);
+ debug("Retimer version id = 0x%x\n", reg);
+
+ /* Enable Broadcast */
+ reg = 0x0c;
+ i2c_write(I2C_RETIMER_ADDR, 0xff, 1, &reg, 1);
+
+ /* Reset Channel Registers */
+ i2c_read(I2C_RETIMER_ADDR, 0, 1, &reg, 1);
+ reg |= 0x4;
+ i2c_write(I2C_RETIMER_ADDR, 0, 1, &reg, 1);
+
+ /* Enable override divider select and Enable Override Output Mux */
+ i2c_read(I2C_RETIMER_ADDR, 9, 1, &reg, 1);
+ reg |= 0x24;
+ i2c_write(I2C_RETIMER_ADDR, 9, 1, &reg, 1);
+
+ /* Select VCO Divider to full rate (000) */
+ i2c_read(I2C_RETIMER_ADDR, 0x18, 1, &reg, 1);
+ reg &= 0x8f;
+ i2c_write(I2C_RETIMER_ADDR, 0x18, 1, &reg, 1);
+
+ /* Select active PFD MUX input as re-timed data (001) */
+ i2c_read(I2C_RETIMER_ADDR, 0x1e, 1, &reg, 1);
+ reg &= 0x3f;
+ reg |= 0x20;
+ i2c_write(I2C_RETIMER_ADDR, 0x1e, 1, &reg, 1);
+
+ /* Set data rate as 10.3125 Gbps */
+ reg = 0x0;
+ i2c_write(I2C_RETIMER_ADDR, 0x60, 1, &reg, 1);
+ reg = 0xb2;
+ i2c_write(I2C_RETIMER_ADDR, 0x61, 1, &reg, 1);
+ reg = 0x90;
+ i2c_write(I2C_RETIMER_ADDR, 0x62, 1, &reg, 1);
+ reg = 0xb3;
+ i2c_write(I2C_RETIMER_ADDR, 0x63, 1, &reg, 1);
+ reg = 0xcd;
+ i2c_write(I2C_RETIMER_ADDR, 0x64, 1, &reg, 1);
+}
+
+int board_early_init_r(void)
+{
+#ifdef CONFIG_SYS_FLASH_BASE
+ const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
+ int flash_esel = find_tlb_idx((void *)flashbase, 1);
+
+ /*
+ * Remap Boot flash + PROMJET region to caching-inhibited
+ * so that flash can be erased properly.
+ */
+
+ /* Flush d-cache and invalidate i-cache of any FLASH data */
+ flush_dcache();
+ invalidate_icache();
+
+ if (flash_esel == -1) {
+ /* very unlikely unless something is messed up */
+ puts("Error: Could not find TLB for FLASH BASE\n");
+ flash_esel = 2; /* give our best effort to continue */
+ } else {
+ /* invalidate existing TLB entry for flash + promjet */
+ disable_tlb(flash_esel);
+ }
+
+ set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, flash_esel, BOOKE_PAGESZ_256M, 1);
+#endif
+ set_liodns();
+#ifdef CONFIG_SYS_DPAA_QBMAN
+ setup_portals();
+#endif
+ select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+ board_mux_lane_to_slot();
+ board_retimer_ds125df111_init();
+
+ /* Increase IO drive strength to address FCS error on RGMII */
+ out_be32((unsigned *)CONFIG_SYS_FSL_SCFG_IODSECR1_ADDR, 0xbfdb7800);
+
+ return 0;
+}
+
+unsigned long get_board_sys_clk(void)
+{
+ u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
+
+ switch (sysclk_conf & 0x0F) {
+ case QIXIS_SYSCLK_64:
+ return 64000000;
+ case QIXIS_SYSCLK_83:
+ return 83333333;
+ case QIXIS_SYSCLK_100:
+ return 100000000;
+ case QIXIS_SYSCLK_125:
+ return 125000000;
+ case QIXIS_SYSCLK_133:
+ return 133333333;
+ case QIXIS_SYSCLK_150:
+ return 150000000;
+ case QIXIS_SYSCLK_160:
+ return 160000000;
+ case QIXIS_SYSCLK_166:
+ return 166666666;
+ }
+ return 66666666;
+}
+
+unsigned long get_board_ddr_clk(void)
+{
+ u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);
+
+ switch ((ddrclk_conf & 0x30) >> 4) {
+ case QIXIS_DDRCLK_100:
+ return 100000000;
+ case QIXIS_DDRCLK_125:
+ return 125000000;
+ case QIXIS_DDRCLK_133:
+ return 133333333;
+ }
+ return 66666666;
+}
+
+#define NUM_SRDS_PLL 2
+int misc_init_r(void)
+{
+#ifdef CONFIG_PPC_T1024
+ board_mux_setup();
+#endif
+ return 0;
+}
+
+void fdt_fixup_spi_mux(void *blob)
+{
+ int nodeoff = 0;
+
+ if (hwconfig_arg_cmp("pin_mux", "tdm")) {
+ while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
+ "eon,en25s64")) >= 0) {
+ fdt_del_node(blob, nodeoff);
+ }
+ } else {
+ /* remove tdm node */
+ while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
+ "maxim,ds26522")) >= 0) {
+ fdt_del_node(blob, nodeoff);
+ }
+ }
+}
+
+int ft_board_setup(void *blob, bd_t *bd)
+{
+ phys_addr_t base;
+ phys_size_t size;
+
+ ft_cpu_setup(blob, bd);
+
+ base = getenv_bootm_low();
+ size = getenv_bootm_size();
+
+ fdt_fixup_memory(blob, (u64)base, (u64)size);
+
+#ifdef CONFIG_PCI
+ pci_of_setup(blob, bd);
+#endif
+
+ fdt_fixup_liodn(blob);
+
+#ifdef CONFIG_HAS_FSL_DR_USB
+ fdt_fixup_dr_usb(blob, bd);
+#endif
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+ fdt_fixup_fman_ethernet(blob);
+ fdt_fixup_board_enet(blob);
+#endif
+ fdt_fixup_spi_mux(blob);
+
+ return 0;
+}
+
+void qixis_dump_switch(void)
+{
+ int i, nr_of_cfgsw;
+
+ QIXIS_WRITE(cms[0], 0x00);
+ nr_of_cfgsw = QIXIS_READ(cms[1]);
+
+ puts("DIP switch settings dump:\n");
+ for (i = 1; i <= nr_of_cfgsw; i++) {
+ QIXIS_WRITE(cms[0], i);
+ printf("SW%d = (0x%02x)\n", i, QIXIS_READ(cms[1]));
+ }
+}
+
+#ifdef CONFIG_DEEP_SLEEP
+void board_mem_sleep_setup(void)
+{
+ /* does not provide HW signals for power management */
+ QIXIS_WRITE(pwr_ctl[1], (QIXIS_READ(pwr_ctl[1]) & ~0x2));
+ /* Disable MCKE isolation */
+ gpio_set_value(2, 0);
+ udelay(1);
+}
+#endif
diff --git a/board/freescale/t102xqds/t102xqds.h b/board/freescale/t102xqds/t102xqds.h
new file mode 100644
index 0000000..64ff623
--- /dev/null
+++ b/board/freescale/t102xqds/t102xqds.h
@@ -0,0 +1,14 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __T102x_QDS_H__
+#define __T102x_QDS_H__
+
+void fdt_fixup_board_enet(void *blob);
+void pci_of_setup(void *blob, bd_t *bd);
+int select_i2c_ch_pca9547(u8 ch);
+
+#endif
diff --git a/board/freescale/t102xqds/t102xqds_qixis.h b/board/freescale/t102xqds/t102xqds_qixis.h
new file mode 100644
index 0000000..a429fb7
--- /dev/null
+++ b/board/freescale/t102xqds/t102xqds_qixis.h
@@ -0,0 +1,64 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __T1024QDS_QIXIS_H__
+#define __T1024QDS_QIXIS_H__
+
+/* Definitions of QIXIS Registers for T1024/T1023 QDS */
+
+/* BRDCFG4[4:7]] select EC1 and EC2 as a pair */
+#define BRDCFG4_EMISEL_MASK 0xE0
+#define BRDCFG4_EMISEL_SHIFT 5
+
+/* BRDCFG5[0:1] controls routing and use of I2C3 & I2C4 ports*/
+#define BRDCFG5_IMX_MASK 0xC0
+#define BRDCFG5_IMX_DIU 0x80
+
+#define BRDCFG5_SPIRTE_MASK 0x07
+#define BRDCFG5_SPIRTE_TDM 0x01
+#define BRDCFG5_SPIRTE_SDHC 0x02
+#define BRDCFG9_XFI_TX_DISABLE 0x10
+
+/* BRDCFG13[0:5] TDM configuration and setup */
+#define BRDCFG13_TDM_MASK 0xfc
+#define BRDCFG13_TDM_INTERFACE 0x37
+#define BRDCFG13_HDLC_LOOPBACK 0x29
+#define BRDCFG13_TDM_LOOPBACK 0x31
+
+/* BRDCFG15[3] controls LCD Panel Powerdown */
+#define BRDCFG15_LCDFM 0x20
+#define BRDCFG15_LCDPD 0x10
+#define BRDCFG15_LCDPD_MASK 0x10
+#define BRDCFG15_LCDPD_ENABLED 0x00
+
+/* BRDCFG15[6:7] controls DIU MUX selction*/
+#define BRDCFG15_DIUSEL_MASK 0x03
+#define BRDCFG15_DIUSEL_HDMI 0x00
+#define BRDCFG15_DIUSEL_LCD 0x01
+#define BRDCFG15_DIUSEL_UCC 0x02
+#define BRDCFG15_DIUSEL_TDM 0x03
+
+/* SYSCLK */
+#define QIXIS_SYSCLK_66 0x0
+#define QIXIS_SYSCLK_83 0x1
+#define QIXIS_SYSCLK_100 0x2
+#define QIXIS_SYSCLK_125 0x3
+#define QIXIS_SYSCLK_133 0x4
+#define QIXIS_SYSCLK_150 0x5
+#define QIXIS_SYSCLK_160 0x6
+#define QIXIS_SYSCLK_166 0x7
+#define QIXIS_SYSCLK_64 0x8
+
+/* DDRCLK */
+#define QIXIS_DDRCLK_66 0x0
+#define QIXIS_DDRCLK_100 0x1
+#define QIXIS_DDRCLK_125 0x2
+#define QIXIS_DDRCLK_133 0x3
+
+
+#define QIXIS_SRDS1CLK_122 0x5a
+#define QIXIS_SRDS1CLK_125 0x5e
+#endif
diff --git a/board/freescale/t102xqds/tlb.c b/board/freescale/t102xqds/tlb.c
new file mode 100644
index 0000000..409e173
--- /dev/null
+++ b/board/freescale/t102xqds/tlb.c
@@ -0,0 +1,117 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+ /* TLB 0 - for temp stack in cache */
+ SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR,
+ CONFIG_SYS_INIT_RAM_ADDR_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
+ CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
+ CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
+ CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+
+ /* TLB 1 */
+ /* *I*** - Covers boot page */
+#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L3_ADDR)
+ /*
+ * *I*G - L3SRAM. When L3 is used as 256K SRAM, the address of the
+ * SRAM is at 0xfffc0000, it covered the 0xfffff000.
+ */
+ SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 0, BOOKE_PAGESZ_256K, 1),
+#else
+ SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 0, BOOKE_PAGESZ_4K, 1),
+#endif
+
+ /* *I*G* - CCSRBAR */
+ SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 1, BOOKE_PAGESZ_16M, 1),
+
+ /* *I*G* - Flash, localbus */
+ /* This will be changed to *I*G* after relocation to RAM. */
+ SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
+ MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
+ 0, 2, BOOKE_PAGESZ_256M, 1),
+
+#ifndef CONFIG_SPL_BUILD
+ /* *I*G* - PCI */
+ SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 3, BOOKE_PAGESZ_1G, 1),
+
+ /* *I*G* - PCI I/O */
+ SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 4, BOOKE_PAGESZ_256K, 1),
+
+ /* Bman/Qman */
+#ifdef CONFIG_SYS_BMAN_MEM_PHYS
+ SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE, CONFIG_SYS_BMAN_MEM_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 5, BOOKE_PAGESZ_16M, 1),
+ SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE + 0x01000000,
+ CONFIG_SYS_BMAN_MEM_PHYS + 0x01000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 6, BOOKE_PAGESZ_16M, 1),
+#endif
+#ifdef CONFIG_SYS_QMAN_MEM_PHYS
+ SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE, CONFIG_SYS_QMAN_MEM_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 7, BOOKE_PAGESZ_16M, 1),
+ SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE + 0x01000000,
+ CONFIG_SYS_QMAN_MEM_PHYS + 0x01000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 8, BOOKE_PAGESZ_16M, 1),
+#endif
+#endif
+#ifdef CONFIG_SYS_DCSRBAR_PHYS
+ SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 9, BOOKE_PAGESZ_4M, 1),
+#endif
+#ifdef CONFIG_SYS_NAND_BASE
+ SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 10, BOOKE_PAGESZ_64K, 1),
+#endif
+#ifdef QIXIS_BASE
+ SET_TLB_ENTRY(1, QIXIS_BASE, QIXIS_BASE_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 11, BOOKE_PAGESZ_4K, 1),
+#endif
+
+#if defined(CONFIG_RAMBOOT_PBL) && !defined(CONFIG_SPL_BUILD)
+ SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 12, BOOKE_PAGESZ_1G, 1),
+ SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
+ CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 13, BOOKE_PAGESZ_1G, 1)
+#endif
+ /* entry 14 and 15 has been used hard coded, they will be disabled
+ * in cpu_init_f, so if needed more, will use entry 16 later.
+ */
+};
+
+int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/freescale/t102xrdb/Kconfig b/board/freescale/t102xrdb/Kconfig
new file mode 100644
index 0000000..10d49f5
--- /dev/null
+++ b/board/freescale/t102xrdb/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_T102XRDB
+
+config SYS_BOARD
+ default "t102xrdb"
+
+config SYS_VENDOR
+ default "freescale"
+
+config SYS_CONFIG_NAME
+ default "T102xRDB"
+
+endif
diff --git a/board/freescale/t102xrdb/MAINTAINERS b/board/freescale/t102xrdb/MAINTAINERS
new file mode 100644
index 0000000..dc554d4
--- /dev/null
+++ b/board/freescale/t102xrdb/MAINTAINERS
@@ -0,0 +1,10 @@
+T102XRDB BOARD
+M: Shengzhou Liu <Shengzhou.Liu@freescale.com>
+S: Maintained
+F: board/freescale/t102xrdb/
+F: include/configs/T102xRDB.h
+F: configs/T1024RDB_defconfig
+F: configs/T1024RDB_NAND_defconfig
+F: configs/T1024RDB_SDCARD_defconfig
+F: configs/T1024RDB_SPIFLASH_defconfig
+F: configs/T1024RDB_SECURE_BOOT_defconfig
diff --git a/board/freescale/t102xrdb/Makefile b/board/freescale/t102xrdb/Makefile
new file mode 100644
index 0000000..a0cf8f6
--- /dev/null
+++ b/board/freescale/t102xrdb/Makefile
@@ -0,0 +1,17 @@
+#
+# Copyright 2014 Freescale Semiconductor, Inc.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+ifdef CONFIG_SPL_BUILD
+obj-y += spl.o
+else
+obj-y += t102xrdb.o
+obj-y += cpld.o
+obj-y += eth_t102xrdb.o
+obj-$(CONFIG_PCI) += pci.o
+endif
+obj-y += ddr.o
+obj-y += law.o
+obj-y += tlb.o
diff --git a/board/freescale/t102xrdb/README b/board/freescale/t102xrdb/README
new file mode 100644
index 0000000..2b17f50
--- /dev/null
+++ b/board/freescale/t102xrdb/README
@@ -0,0 +1,258 @@
+T1024 SoC Overview
+------------------
+The T1024/T1023 dual core and T1014/T1013 single core QorIQ communication processor
+combines two or one 64-bit Power Architecture e5500 core respectively with high
+performance datapath acceleration logic, and network peripheral bus interfaces
+required for networking and telecommunications. This processor can be used in
+applications such as enterprise WLAN access points, routers, switches, firewall
+and other packet processing intensive small enterprise and branch office appliances,
+and general-purpose embedded computing. Its high level of integration offers
+significant performance benefits and greatly helps to simplify board design.
+
+
+The T1024 SoC includes the following function and features:
+- two e5500 cores, each with a private 256 KB L2 cache
+ - Up to 1.4 GHz with 64-bit ISA support (Power Architecture v2.06-compliant)
+ - Three levels of instructions: User, supervisor, and hypervisor
+ - Independent boot and reset
+ - Secure boot capability
+- 256 KB shared L3 CoreNet platform cache (CPC)
+- Interconnect CoreNet platform
+ - CoreNet coherency manager supporting coherent and noncoherent transactions
+ with prioritization and bandwidth allocation amongst CoreNet endpoints
+ - 150 Gbps coherent read bandwidth
+- 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving support
+- Data Path Acceleration Architecture (DPAA) incorporating acceleration for the following functions:
+ - Packet parsing, classification, and distribution
+ - Queue management for scheduling, packet sequencing, and congestion management
+ - Cryptography Acceleration (SEC 5.x)
+ - IEEE 1588 support
+ - Hardware buffer management for buffer allocation and deallocation
+ - MACSEC on DPAA-based Ethernet ports
+- Ethernet interfaces
+ - Four 1 Gbps Ethernet controllers
+- Parallel Ethernet interfaces
+ - Two RGMII interfaces
+- High speed peripheral interfaces
+ - Three PCI Express 2.0 controllers/ports running at up to 5 GHz
+ - One SATA controller supporting 1.5 and 3.0 Gb/s operation
+ - One QSGMII interface
+ - Four SGMII interface supporting 1000 Mbps
+ - Three SGMII interfaces supporting up to 2500 Mbps
+ - 10GbE XFI or 10Base-KR interface
+- Additional peripheral interfaces
+ - Two USB 2.0 controllers with integrated PHY
+ - SD/eSDHC/eMMC
+ - eSPI controller
+ - Four I2C controllers
+ - Four UARTs
+ - Four GPIO controllers
+ - Integrated flash controller (IFC)
+ - LCD interface (DIU) with 12 bit dual data rate
+- Multicore programmable interrupt controller (PIC)
+- Two 8-channel DMA engines
+- Single source clocking implementation
+- Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB)
+- QUICC Engine block
+ - 32-bit RISC controller for flexible support of the communications peripherals
+ - Serial DMA channel for receive and transmit on all serial channels
+ - Two universal communication controllers, supporting TDM, HDLC, and UART
+
+T1023 Personality
+------------------
+T1023 is a reduced personality of T1024 without QUICC Engine, DIU, and
+unavailable deep sleep. Rest of the blocks are almost same as T1024.
+Differences between T1024 and T1023
+Feature T1024 T1023
+QUICC Engine: yes no
+DIU: yes no
+Deep Sleep: yes no
+I2C controller: 4 3
+DDR: 64-bit 32-bit
+IFC: 32-bit 28-bit
+
+
+T1024RDB board Overview
+-----------------------
+ - Ethernet
+ - Two on-board 10M/100M/1G bps RGMII ethernet ports
+ - One on-board 10G bps Base-T port.
+ - DDR Memory
+ - Supports 64-bit 4GB DDR3L DIMM
+ - PCIe
+ - One on-board PCIe slot.
+ - Two on-board PCIe Mini-PCIe connectors.
+ - IFC/Local Bus
+ - NOR: 128MB 16-bit NOR Flash
+ - NAND: 1GB 8-bit NAND flash
+ - CPLD: for system controlling with programable header on-board
+ - USB
+ - Supports two USB 2.0 ports with integrated PHYs
+ - Two type A ports with 5V@1.5A per port.
+ - SDHC
+ - one SD connector supporting 1.8V/3.3V via J53.
+ - SPI
+ - On-board 64MB SPI flash
+ - Other
+ - Two Serial ports
+ - Four I2C ports
+
+
+Memory map on T1024RDB
+----------------------
+Start Address End Address Description Size
+0xF_FFDF_0000 0xF_FFDF_0FFF IFC - CPLD 4KB
+0xF_FF80_0000 0xF_FF80_FFFF IFC - NAND Flash 64KB
+0xF_FE00_0000 0xF_FEFF_FFFF CCSRBAR 16MB
+0xF_F802_0000 0xF_F802_FFFF PCI Express 3 I/O Space 64KB
+0xF_F801_0000 0xF_F801_FFFF PCI Express 2 I/O Space 64KB
+0xF_F800_0000 0xF_F800_FFFF PCI Express 1 I/O Space 64KB
+0xF_F600_0000 0xF_F7FF_FFFF Queue manager software portal 32MB
+0xF_F400_0000 0xF_F5FF_FFFF Buffer manager software portal 32MB
+0xF_E800_0000 0xF_EFFF_FFFF IFC - NOR Flash 128MB
+0xF_0000_0000 0xF_003F_FFFF DCSR 4MB
+0xC_2000_0000 0xC_2FFF_FFFF PCI Express 3 Mem Space 256MB
+0xC_1000_0000 0xC_1FFF_FFFF PCI Express 2 Mem Space 256MB
+0xC_0000_0000 0xC_0FFF_FFFF PCI Express 1 Mem Space 256MB
+0x0_0000_0000 0x0_ffff_ffff DDR 4GB
+
+
+128MB NOR Flash memory Map
+--------------------------
+Start Address End Address Definition Max size
+0xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB
+0xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB
+0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB
+0xEFE00000 0xEFE3FFFF QE firmware (current bank) 256KB
+0xED300000 0xEFEFFFFF rootfs (alt bank) 44MB
+0xEC800000 0xEC8FFFFF Hardware device tree (alt bank) 1MB
+0xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB
+0xEC000000 0xEC01FFFF RCW (alt bank) 128KB
+0xEBF40000 0xEBFFFFFF u-boot (alt bank) 768KB
+0xEBF20000 0xEBF3FFFF u-boot env (alt bank) 128KB
+0xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB
+0xEBE00000 0xEBE3FFFF QE firmware (alt bank) 256KB
+0xE9300000 0xEBEFFFFF rootfs (current bank) 44MB
+0xE8800000 0xE88FFFFF Hardware device tree (cur bank) 1MB
+0xE8020000 0xE86FFFFF Linux.uImage (current bank) 7MB + 875KB
+0xE8000000 0xE801FFFF RCW (current bank) 128KB
+
+
+T1024 Clock frequency
+---------------------
+BIN Core DDR Platform FMan
+Bin1: 1400MHz 1600MT/s 400MHz 700MHz
+Bin2: 1200MHz 1600MT/s 400MHz 600MHz
+Bin3: 1000MHz 1600MT/s 400MHz 500MHz
+
+
+Software configurations and board settings
+------------------------------------------
+1. NOR boot:
+ a. build NOR boot image
+ $ make T1024RDB_defconfig
+ $ make
+ b. program u-boot.bin image to NOR flash
+ => tftp 1000000 u-boot.bin
+ => pro off all;era eff40000 efffffff;cp.b 1000000 eff40000 $filesize
+ set SW1[1:8] = '00010011', SW2[1] = '1', SW3[4] = '0' for NOR boot
+
+ Switching between default bank0 and alternate bank4 on NOR flash
+ To change boot source to vbank4:
+ via software: run command 'cpld reset altbank' in u-boot.
+ via DIP-switch: set SW3[5:7] = '100'
+
+ To change boot source to vbank0:
+ via software: run command 'cpld reset' in u-boot.
+ via DIP-Switch: set SW3[5:7] = '000'
+
+2. NAND Boot:
+ a. build PBL image for NAND boot
+ $ make T1024RDB_NAND_defconfig
+ $ make
+ b. program u-boot-with-spl-pbl.bin to NAND flash
+ => tftp 1000000 u-boot-with-spl-pbl.bin
+ => nand erase 0 $filesize
+ => nand write 1000000 0 $filesize
+ set SW1[1:8] = '10001000', SW2[1] = '1', SW3[4] = '1' for NAND boot
+
+3. SPI Boot:
+ a. build PBL image for SPI boot
+ $ make T1024RDB_SPIFLASH_defconfig
+ $ make
+ b. program u-boot-with-spl-pbl.bin to SPI flash
+ => tftp 1000000 u-boot-with-spl-pbl.bin
+ => sf probe 0
+ => sf erase 0 f0000
+ => sf write 1000000 0 $filesize
+ set SW1[1:8] = '00100010', SW2[1] ='1' for SPI boot
+
+4. SD Boot:
+ a. build PBL image for SD boot
+ $ make T1024RDB_SDCARD_defconfig
+ $ make
+ b. program u-boot-with-spl-pbl.bin to SD/MMC card
+ => tftp 1000000 u-boot-with-spl-pbl.bin
+ => mmc write 1000000 8 0x800
+ => tftp 1000000 fsl_fman_ucode_t1024_xx.bin
+ => mmc write 1000000 0x820 80
+ set SW1[1:8] = '00100000', SW2[1] = '0' for SD boot
+
+
+2-stage NAND/SPI/SD boot loader
+-------------------------------
+PBL initializes the internal CPC-SRAM and copy SPL(160K) to SRAM.
+SPL further initializes DDR using SPD and environment variables
+and copy u-boot(768 KB) from NAND/SPI/SD device to DDR.
+Finally SPL transers control to u-boot for futher booting.
+
+SPL has following features:
+ - Executes within 256K
+ - No relocation required
+
+Run time view of SPL framework
+-------------------------------------------------
+|Area | Address |
+-------------------------------------------------
+|SecureBoot header | 0xFFFC0000 (32KB) |
+-------------------------------------------------
+|GD, BD | 0xFFFC8000 (4KB) |
+-------------------------------------------------
+|ENV | 0xFFFC9000 (8KB) |
+-------------------------------------------------
+|HEAP | 0xFFFCB000 (30KB) |
+-------------------------------------------------
+|STACK | 0xFFFD8000 (22KB) |
+-------------------------------------------------
+|U-boot SPL | 0xFFFD8000 (160KB) |
+-------------------------------------------------
+
+NAND Flash memory Map on T1024RDB
+-------------------------------------------------------------
+Start End Definition Size
+0x000000 0x0FFFFF u-boot 1MB(2 block)
+0x100000 0x17FFFF u-boot env 512KB(1 block)
+0x180000 0x1FFFFF FMAN Ucode 512KB(1 block)
+0x200000 0x27FFFF QE Firmware 512KB(1 block)
+
+
+SD Card memory Map on T1024RDB
+----------------------------------------------------
+Block #blocks Definition Size
+0x008 2048 u-boot img 1MB
+0x800 0016 u-boot env 8KB
+0x820 0256 FMAN Ucode 128KB
+0x920 0256 QE Firmware 128KB
+
+
+SPI Flash memory Map on T1024RDB
+----------------------------------------------------
+Start End Definition Size
+0x000000 0x0FFFFF u-boot img 1MB
+0x100000 0x101FFF u-boot env 8KB
+0x110000 0x12FFFF FMAN Ucode 128KB
+0x130000 0x14FFFF QE Firmware 128KB
+
+
+For more details, please refer to T1024RDB Reference Manual and access
+website www.freescale.com and Freescale QorIQ SDK Infocenter document.
diff --git a/board/freescale/t102xrdb/cpld.c b/board/freescale/t102xrdb/cpld.c
new file mode 100644
index 0000000..c03894a
--- /dev/null
+++ b/board/freescale/t102xrdb/cpld.c
@@ -0,0 +1,103 @@
+/**
+ * Copyright 2014 Freescale Semiconductor
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Freescale T1024RDB board-specific CPLD controlling supports.
+ *
+ * The following macros need to be defined:
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/io.h>
+#include "cpld.h"
+
+u8 cpld_read(unsigned int reg)
+{
+ void *p = (void *)CONFIG_SYS_CPLD_BASE;
+
+ return in_8(p + reg);
+}
+
+void cpld_write(unsigned int reg, u8 value)
+{
+ void *p = (void *)CONFIG_SYS_CPLD_BASE;
+
+ out_8(p + reg, value);
+}
+
+/**
+ * Set the boot bank to the alternate bank
+ */
+void cpld_set_altbank(void)
+{
+ u8 reg = CPLD_READ(flash_csr);
+
+ reg = (reg & ~CPLD_BANK_SEL_MASK) | CPLD_LBMAP_ALTBANK;
+
+ CPLD_WRITE(flash_csr, reg);
+ CPLD_WRITE(reset_ctl1, CPLD_LBMAP_RESET);
+}
+
+/**
+ * Set the boot bank to the default bank
+ */
+void cpld_set_defbank(void)
+{
+ u8 reg = CPLD_READ(flash_csr);
+
+ reg = (reg & ~CPLD_BANK_SEL_MASK) | CPLD_LBMAP_DFLTBANK;
+
+ CPLD_WRITE(flash_csr, reg);
+ CPLD_WRITE(reset_ctl1, CPLD_LBMAP_RESET);
+}
+
+static void cpld_dump_regs(void)
+{
+ printf("cpld_ver = 0x%02x\n", CPLD_READ(cpld_ver));
+ printf("cpld_ver_sub = 0x%02x\n", CPLD_READ(cpld_ver_sub));
+ printf("hw_ver = 0x%02x\n", CPLD_READ(hw_ver));
+ printf("sw_ver = 0x%02x\n", CPLD_READ(sw_ver));
+ printf("reset_ctl1 = 0x%02x\n", CPLD_READ(reset_ctl1));
+ printf("reset_ctl2 = 0x%02x\n", CPLD_READ(reset_ctl2));
+ printf("int_status = 0x%02x\n", CPLD_READ(int_status));
+ printf("flash_csr = 0x%02x\n", CPLD_READ(flash_csr));
+ printf("fan_ctl_status = 0x%02x\n", CPLD_READ(fan_ctl_status));
+ printf("led_ctl_status = 0x%02x\n", CPLD_READ(led_ctl_status));
+ printf("sfp_ctl_status = 0x%02x\n", CPLD_READ(sfp_ctl_status));
+ printf("misc_ctl_status = 0x%02x\n", CPLD_READ(misc_ctl_status));
+ printf("boot_override = 0x%02x\n", CPLD_READ(boot_override));
+ printf("boot_config1 = 0x%02x\n", CPLD_READ(boot_config1));
+ printf("boot_config2 = 0x%02x\n", CPLD_READ(boot_config2));
+ putc('\n');
+}
+
+int do_cpld(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ int rc = 0;
+
+ if (argc <= 1)
+ return cmd_usage(cmdtp);
+
+ if (strcmp(argv[1], "reset") == 0) {
+ if (strcmp(argv[2], "altbank") == 0)
+ cpld_set_altbank();
+ else
+ cpld_set_defbank();
+ } else if (strcmp(argv[1], "dump") == 0) {
+ cpld_dump_regs();
+ } else {
+ rc = cmd_usage(cmdtp);
+ }
+
+ return rc;
+}
+
+U_BOOT_CMD(
+ cpld, CONFIG_SYS_MAXARGS, 1, do_cpld,
+ "Reset the board or alternate bank",
+ "reset - hard reset to default bank\n"
+ "cpld reset altbank - reset to alternate bank\n"
+ "cpld dump - display the CPLD registers\n"
+ );
diff --git a/board/freescale/t102xrdb/cpld.h b/board/freescale/t102xrdb/cpld.h
new file mode 100644
index 0000000..5a3100f
--- /dev/null
+++ b/board/freescale/t102xrdb/cpld.h
@@ -0,0 +1,45 @@
+/**
+ * Copyright 2014 Freescale Semiconductor
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ */
+
+struct cpld_data {
+ u8 cpld_ver; /* 0x00 - CPLD Major Revision Register */
+ u8 cpld_ver_sub; /* 0x01 - CPLD Minor Revision Register */
+ u8 hw_ver; /* 0x02 - Hardware Revision Register */
+ u8 sw_ver; /* 0x03 - Software Revision register */
+ u8 res0[12]; /* 0x04 - 0x0F - not used */
+ u8 reset_ctl1; /* 0x10 - Reset control Register1 */
+ u8 reset_ctl2; /* 0x11 - Reset control Register2 */
+ u8 int_status; /* 0x12 - Interrupt status Register */
+ u8 flash_csr; /* 0x13 - Flash control and status register */
+ u8 fan_ctl_status; /* 0x14 - Fan control and status register */
+ u8 led_ctl_status; /* 0x15 - LED control and status register */
+ u8 sfp_ctl_status; /* 0x16 - SFP control and status register */
+ u8 misc_ctl_status; /* 0x17 - Miscellanies ctrl & status register*/
+ u8 boot_override; /* 0x18 - Boot override register */
+ u8 boot_config1; /* 0x19 - Boot config override register*/
+ u8 boot_config2; /* 0x1A - Boot config override register*/
+} cpld_data_t;
+
+
+/* Pointer to the CPLD register set */
+
+u8 cpld_read(unsigned int reg);
+void cpld_write(unsigned int reg, u8 value);
+
+#define CPLD_READ(reg) cpld_read(offsetof(struct cpld_data, reg))
+#define CPLD_WRITE(reg, value)\
+ cpld_write(offsetof(struct cpld_data, reg), value)
+
+/* CPLD on IFC */
+#define CPLD_LBMAP_MASK 0x3F
+#define CPLD_BANK_SEL_MASK 0x07
+#define CPLD_BANK_OVERRIDE 0x40
+#define CPLD_LBMAP_ALTBANK 0x44 /* BANK OR | BANK 4 */
+#define CPLD_LBMAP_DFLTBANK 0x40 /* BANK OR | BANK 0 */
+#define CPLD_LBMAP_RESET 0xFF
+#define CPLD_LBMAP_SHIFT 0x03
+#define CPLD_BOOT_SEL 0x80
diff --git a/board/freescale/t102xrdb/ddr.c b/board/freescale/t102xrdb/ddr.c
new file mode 100644
index 0000000..a20330b
--- /dev/null
+++ b/board/freescale/t102xrdb/ddr.c
@@ -0,0 +1,154 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <hwconfig.h>
+#include <asm/mmu.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
+#include <asm/fsl_law.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct board_specific_parameters {
+ u32 n_ranks;
+ u32 datarate_mhz_high;
+ u32 rank_gb;
+ u32 clk_adjust;
+ u32 wrlvl_start;
+ u32 wrlvl_ctl_2;
+ u32 wrlvl_ctl_3;
+};
+
+/*
+ * datarate_mhz_high values need to be in ascending order
+ */
+static const struct board_specific_parameters udimm0[] = {
+ /*
+ * memory controller 0
+ * num| hi| rank| clk| wrlvl | wrlvl | wrlvl |
+ * ranks| mhz| GB |adjst| start | ctl2 | ctl3 |
+ */
+ {2, 833, 0, 4, 6, 0x06060607, 0x08080807,},
+ {2, 1350, 0, 4, 7, 0x0708080A, 0x0A0B0C09,},
+ {2, 1666, 0, 4, 7, 0x0808090B, 0x0C0D0E0A,},
+ {1, 833, 0, 4, 6, 0x06060607, 0x08080807,},
+ {1, 1350, 0, 4, 7, 0x0708080A, 0x0A0B0C09,},
+ {1, 1666, 0, 4, 7, 0x0808090B, 0x0C0D0E0A,},
+ {}
+};
+
+static const struct board_specific_parameters *udimms[] = {
+ udimm0,
+};
+
+void fsl_ddr_board_options(memctl_options_t *popts,
+ dimm_params_t *pdimm,
+ unsigned int ctrl_num)
+{
+ const struct board_specific_parameters *pbsp, *pbsp_highest = NULL;
+ ulong ddr_freq;
+ struct cpu_type *cpu = gd->arch.cpu;
+
+ if (ctrl_num > 1) {
+ printf("Not supported controller number %d\n", ctrl_num);
+ return;
+ }
+ if (!pdimm->n_ranks)
+ return;
+
+ pbsp = udimms[0];
+
+ /* Get clk_adjust according to the board ddr freqency and n_banks
+ * specified in board_specific_parameters table.
+ */
+ ddr_freq = get_ddr_freq(0) / 1000000;
+ while (pbsp->datarate_mhz_high) {
+ if (pbsp->n_ranks == pdimm->n_ranks &&
+ (pdimm->rank_density >> 30) >= pbsp->rank_gb) {
+ if (ddr_freq <= pbsp->datarate_mhz_high) {
+ popts->clk_adjust = pbsp->clk_adjust;
+ popts->wrlvl_start = pbsp->wrlvl_start;
+ popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
+ popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
+ goto found;
+ }
+ pbsp_highest = pbsp;
+ }
+ pbsp++;
+ }
+
+ if (pbsp_highest) {
+ printf("Error: board specific timing not found\n");
+ printf("for data rate %lu MT/s\n", ddr_freq);
+ printf("Trying to use the highest speed (%u) parameters\n",
+ pbsp_highest->datarate_mhz_high);
+ popts->clk_adjust = pbsp_highest->clk_adjust;
+ popts->wrlvl_start = pbsp_highest->wrlvl_start;
+ popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
+ popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
+ } else {
+ panic("DIMM is not supported by this board");
+ }
+found:
+ debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n",
+ pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb);
+ debug("\tclk_adjust %d, wrlvl_start %d, wrlvl_ctrl_2 0x%x, ",
+ pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2);
+ debug("wrlvl_ctrl_3 0x%x\n", pbsp->wrlvl_ctl_3);
+
+ /*
+ * Factors to consider for half-strength driver enable:
+ * - number of DIMMs installed
+ */
+ popts->half_strength_driver_enable = 0;
+ /*
+ * Write leveling override
+ */
+ popts->wrlvl_override = 1;
+ popts->wrlvl_sample = 0xf;
+
+ /*
+ * rtt and rtt_wr override
+ */
+ popts->rtt_override = 0;
+
+ /* Enable ZQ calibration */
+ popts->zq_en = 1;
+
+ /* DHC_EN =1, ODT = 75 Ohm */
+ popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_OFF);
+ popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_OFF);
+
+ /* T1023 supports max DDR bus 32bit width, T1024 supports DDR 64bit,
+ * force DDR bus width to 32bit for T1023
+ */
+ if (cpu->soc_ver == SVR_T1023)
+ popts->data_bus_width = DDR_DATA_BUS_WIDTH_32;
+
+#ifdef CONFIG_FORCE_DDR_DATA_BUS_WIDTH_32
+ /* for DDR bus 32bit test on T1024 */
+ popts->data_bus_width = DDR_DATA_BUS_WIDTH_32;
+#endif
+}
+
+phys_size_t initdram(int board_type)
+{
+ phys_size_t dram_size;
+
+#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_RAMBOOT_PBL)
+ puts("Initializing....using SPD\n");
+
+ dram_size = fsl_ddr_sdram();
+ dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+ dram_size *= 0x100000;
+#else
+ /* DDR has been initialised by first stage boot loader */
+ dram_size = fsl_ddr_sdram_size();
+#endif
+ return dram_size;
+}
diff --git a/board/freescale/t102xrdb/eth_t102xrdb.c b/board/freescale/t102xrdb/eth_t102xrdb.c
new file mode 100644
index 0000000..2e400c4
--- /dev/null
+++ b/board/freescale/t102xrdb/eth_t102xrdb.c
@@ -0,0 +1,100 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <netdev.h>
+#include <asm/mmu.h>
+#include <asm/processor.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_law.h>
+#include <asm/fsl_serdes.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+#include <malloc.h>
+#include <fm_eth.h>
+#include <fsl_mdio.h>
+#include <miiphy.h>
+#include <phy.h>
+#include <asm/fsl_dtsec.h>
+#include <asm/fsl_serdes.h>
+
+int board_eth_init(bd_t *bis)
+{
+#if defined(CONFIG_FMAN_ENET)
+ int i, interface;
+ struct memac_mdio_info dtsec_mdio_info;
+ struct memac_mdio_info tgec_mdio_info;
+ struct mii_dev *dev;
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 srds_s1;
+
+ srds_s1 = in_be32(&gur->rcwsr[4]) &
+ FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
+ srds_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
+
+ dtsec_mdio_info.regs =
+ (struct memac_mdio_controller *)CONFIG_SYS_FM1_DTSEC_MDIO_ADDR;
+
+ dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME;
+
+ /* Register the 1G MDIO bus */
+ fm_memac_mdio_init(bis, &dtsec_mdio_info);
+
+ tgec_mdio_info.regs =
+ (struct memac_mdio_controller *)CONFIG_SYS_FM1_TGEC_MDIO_ADDR;
+ tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME;
+
+ /* Register the 10G MDIO bus */
+ fm_memac_mdio_init(bis, &tgec_mdio_info);
+
+ /* Set the two on-board RGMII PHY address */
+ fm_info_set_phy_address(FM1_DTSEC3, RGMII_PHY2_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC4, RGMII_PHY1_ADDR);
+
+ switch (srds_s1) {
+ case 0x95:
+ /* 10G XFI with Aquantia PHY */
+ fm_info_set_phy_address(FM1_10GEC1, FM1_10GEC1_PHY_ADDR);
+ break;
+ default:
+ printf("SerDes protocol 0x%x is not supported on T102xRDB\n",
+ srds_s1);
+ break;
+ }
+
+ for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
+ interface = fm_info_get_enet_if(i);
+ switch (interface) {
+ case PHY_INTERFACE_MODE_RGMII:
+ dev = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME);
+ fm_info_set_mdio(i, dev);
+ break;
+ default:
+ break;
+ }
+ }
+
+ for (i = FM1_10GEC1; i < FM1_10GEC1 + CONFIG_SYS_NUM_FM1_10GEC; i++) {
+ switch (fm_info_get_enet_if(i)) {
+ case PHY_INTERFACE_MODE_XGMII:
+ dev = miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME);
+ fm_info_set_mdio(i, dev);
+ break;
+ default:
+ break;
+ }
+ }
+
+ cpu_eth_init(bis);
+#endif /* CONFIG_FMAN_ENET */
+
+ return pci_eth_init(bis);
+}
+
+void fdt_fixup_board_enet(void *fdt)
+{
+}
diff --git a/board/freescale/t102xrdb/law.c b/board/freescale/t102xrdb/law.c
new file mode 100644
index 0000000..1c9235f
--- /dev/null
+++ b/board/freescale/t102xrdb/law.c
@@ -0,0 +1,32 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+struct law_entry law_table[] = {
+#ifndef CONFIG_SYS_NO_FLASH
+ SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_IFC),
+#endif
+#ifdef CONFIG_SYS_BMAN_MEM_PHYS
+ SET_LAW(CONFIG_SYS_BMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_BMAN),
+#endif
+#ifdef CONFIG_SYS_QMAN_MEM_PHYS
+ SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN),
+#endif
+#ifdef CONFIG_SYS_CPLD_BASE_PHYS
+ SET_LAW(CONFIG_SYS_CPLD_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC),
+#endif
+#ifdef CONFIG_SYS_DCSRBAR_PHYS
+ SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_DCSR),
+#endif
+#ifdef CONFIG_SYS_NAND_BASE_PHYS
+ SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_IFC),
+#endif
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/t102xrdb/pci.c b/board/freescale/t102xrdb/pci.c
new file mode 100644
index 0000000..ba7041a
--- /dev/null
+++ b/board/freescale/t102xrdb/pci.c
@@ -0,0 +1,23 @@
+/*
+ * Copyright 2007-2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <pci.h>
+#include <asm/fsl_pci.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <asm/fsl_serdes.h>
+
+void pci_init_board(void)
+{
+ fsl_pcie_init_board(0);
+}
+
+void pci_of_setup(void *blob, bd_t *bd)
+{
+ FT_FSL_PCI_SETUP;
+}
diff --git a/board/freescale/t102xrdb/spl.c b/board/freescale/t102xrdb/spl.c
new file mode 100644
index 0000000..dd2dec4
--- /dev/null
+++ b/board/freescale/t102xrdb/spl.c
@@ -0,0 +1,107 @@
+/* Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <ns16550.h>
+#include <nand.h>
+#include <i2c.h>
+#include <mmc.h>
+#include <fsl_esdhc.h>
+#include <spi_flash.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+phys_size_t get_effective_memsize(void)
+{
+ return CONFIG_SYS_L3_SIZE;
+}
+
+unsigned long get_board_sys_clk(void)
+{
+ return CONFIG_SYS_CLK_FREQ;
+}
+
+unsigned long get_board_ddr_clk(void)
+{
+ return CONFIG_DDR_CLK_FREQ;
+}
+
+void board_init_f(ulong bootflag)
+{
+ u32 plat_ratio, sys_clk, ccb_clk;
+ ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+
+ /* Memcpy existing GD at CONFIG_SPL_GD_ADDR */
+ memcpy((void *)CONFIG_SPL_GD_ADDR, (void *)gd, sizeof(gd_t));
+
+ /* Update GD pointer */
+ gd = (gd_t *)(CONFIG_SPL_GD_ADDR);
+
+ console_init_f();
+
+ /* initialize selected port with appropriate baud rate */
+ sys_clk = get_board_sys_clk();
+ plat_ratio = (in_be32(&gur->rcwsr[0]) >> 25) & 0x1f;
+ ccb_clk = sys_clk * plat_ratio / 2;
+
+ NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
+ ccb_clk / 16 / CONFIG_BAUDRATE);
+
+#if defined(CONFIG_SPL_MMC_BOOT)
+ puts("\nSD boot...\n");
+#elif defined(CONFIG_SPL_SPI_BOOT)
+ puts("\nSPI boot...\n");
+#elif defined(CONFIG_SPL_NAND_BOOT)
+ puts("\nNAND boot...\n");
+#endif
+
+ relocate_code(CONFIG_SPL_RELOC_STACK, (gd_t *)CONFIG_SPL_GD_ADDR, 0x0);
+}
+
+void board_init_r(gd_t *gd, ulong dest_addr)
+{
+ bd_t *bd;
+
+ bd = (bd_t *)(gd + sizeof(gd_t));
+ memset(bd, 0, sizeof(bd_t));
+ gd->bd = bd;
+ bd->bi_memstart = CONFIG_SYS_INIT_L3_ADDR;
+ bd->bi_memsize = CONFIG_SYS_L3_SIZE;
+
+ probecpu();
+ get_clocks();
+ mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
+ CONFIG_SPL_RELOC_MALLOC_SIZE);
+
+#ifdef CONFIG_SPL_NAND_BOOT
+ nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
+ (uchar *)CONFIG_ENV_ADDR);
+#endif
+#ifdef CONFIG_SPL_MMC_BOOT
+ mmc_initialize(bd);
+ mmc_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
+ (uchar *)CONFIG_ENV_ADDR);
+#endif
+#ifdef CONFIG_SPL_SPI_BOOT
+ spi_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
+ (uchar *)CONFIG_ENV_ADDR);
+#endif
+
+ gd->env_addr = (ulong)(CONFIG_ENV_ADDR);
+ gd->env_valid = 1;
+
+ i2c_init_all();
+
+ gd->ram_size = initdram(0);
+
+#ifdef CONFIG_SPL_MMC_BOOT
+ mmc_boot();
+#elif defined(CONFIG_SPL_SPI_BOOT)
+ spi_boot();
+#elif defined(CONFIG_SPL_NAND_BOOT)
+ nand_boot();
+#endif
+}
diff --git a/board/freescale/t102xrdb/t1024_pbi.cfg b/board/freescale/t102xrdb/t1024_pbi.cfg
new file mode 100644
index 0000000..7b9e9b0
--- /dev/null
+++ b/board/freescale/t102xrdb/t1024_pbi.cfg
@@ -0,0 +1,26 @@
+#PBI commands
+#Initialize CPC1
+09010000 00200400
+09138000 00000000
+091380c0 00000100
+#Configure CPC1 as 256KB SRAM
+09010100 00000000
+09010104 fffc0007
+09010f00 08000000
+09010000 80000000
+#Configure LAW for CPC1
+09000cd0 00000000
+09000cd4 fffc0000
+09000cd8 81000011
+#Configure alternate space
+09000010 00000000
+09000014 ff000000
+09000018 81000000
+#Configure SPI controller
+09110000 80000403
+09110020 2d170008
+09110024 00100008
+09110028 00100008
+0911002c 00100008
+#Flush PBL data
+091380c0 000FFFFF
diff --git a/board/freescale/t102xrdb/t1024_rcw.cfg b/board/freescale/t102xrdb/t1024_rcw.cfg
new file mode 100644
index 0000000..cd6f906
--- /dev/null
+++ b/board/freescale/t102xrdb/t1024_rcw.cfg
@@ -0,0 +1,8 @@
+#PBL preamble and RCW header for T1024RDB
+aa55aa55 010e0100
+#SerDes Protocol: 0x95
+#Core/DDR: 1400Mhz/1600MT/s with single source clock
+0810000c 00000000 00000000 00000000
+4a800003 80000012 ec027000 21000000
+00000000 00000000 00000000 00030810
+00000000 0b005a08 00000000 00000006
diff --git a/board/freescale/t102xrdb/t102xrdb.c b/board/freescale/t102xrdb/t102xrdb.c
new file mode 100644
index 0000000..f5c438d
--- /dev/null
+++ b/board/freescale/t102xrdb/t102xrdb.c
@@ -0,0 +1,144 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <i2c.h>
+#include <netdev.h>
+#include <linux/compiler.h>
+#include <asm/mmu.h>
+#include <asm/processor.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_law.h>
+#include <asm/fsl_serdes.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+#include <asm/mpc85xx_gpio.h>
+#include <fm_eth.h>
+#include "t102xrdb.h"
+#include "cpld.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkboard(void)
+{
+ struct cpu_type *cpu = gd->arch.cpu;
+ static const char *freq[3] = {"100.00MHZ", "125.00MHz", "156.25MHZ"};
+
+ printf("Board: %sRDB, ", cpu->name);
+ printf("Board rev: 0x%02x CPLD ver: 0x%02x, boot from ",
+ CPLD_READ(hw_ver), CPLD_READ(sw_ver));
+
+#ifdef CONFIG_SDCARD
+ puts("SD/MMC\n");
+#elif CONFIG_SPIFLASH
+ puts("SPI\n");
+#else
+ u8 reg;
+
+ reg = CPLD_READ(flash_csr);
+
+ if (reg & CPLD_BOOT_SEL) {
+ puts("NAND\n");
+ } else {
+ reg = ((reg & CPLD_LBMAP_MASK) >> CPLD_LBMAP_SHIFT);
+ printf("NOR vBank%d\n", reg);
+ }
+#endif
+
+ puts("SERDES Reference Clocks:\n");
+ printf("SD1_CLK1=%s, SD1_CLK2=%s\n", freq[2], freq[0]);
+
+ return 0;
+}
+
+int board_early_init_r(void)
+{
+#ifdef CONFIG_SYS_FLASH_BASE
+ const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
+ int flash_esel = find_tlb_idx((void *)flashbase, 1);
+ /*
+ * Remap Boot flash region to caching-inhibited
+ * so that flash can be erased properly.
+ */
+
+ /* Flush d-cache and invalidate i-cache of any FLASH data */
+ flush_dcache();
+ invalidate_icache();
+ if (flash_esel == -1) {
+ /* very unlikely unless something is messed up */
+ puts("Error: Could not find TLB for FLASH BASE\n");
+ flash_esel = 2; /* give our best effort to continue */
+ } else {
+ /* invalidate existing TLB entry for flash + promjet */
+ disable_tlb(flash_esel);
+ }
+
+ set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, flash_esel, BOOKE_PAGESZ_256M, 1);
+#endif
+
+ set_liodns();
+#ifdef CONFIG_SYS_DPAA_QBMAN
+ setup_portals();
+#endif
+
+ return 0;
+}
+
+unsigned long get_board_sys_clk(void)
+{
+ return CONFIG_SYS_CLK_FREQ;
+}
+
+unsigned long get_board_ddr_clk(void)
+{
+ return CONFIG_DDR_CLK_FREQ;
+}
+
+int misc_init_r(void)
+{
+ return 0;
+}
+
+int ft_board_setup(void *blob, bd_t *bd)
+{
+ phys_addr_t base;
+ phys_size_t size;
+
+ ft_cpu_setup(blob, bd);
+
+ base = getenv_bootm_low();
+ size = getenv_bootm_size();
+
+ fdt_fixup_memory(blob, (u64)base, (u64)size);
+
+#ifdef CONFIG_PCI
+ pci_of_setup(blob, bd);
+#endif
+
+ fdt_fixup_liodn(blob);
+ fdt_fixup_dr_usb(blob, bd);
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+ fdt_fixup_fman_ethernet(blob);
+ fdt_fixup_board_enet(blob);
+#endif
+
+ return 0;
+}
+
+#ifdef CONFIG_DEEP_SLEEP
+void board_mem_sleep_setup(void)
+{
+ /* does not provide HW signals for power management */
+ CPLD_WRITE(misc_ctl_status, (CPLD_READ(misc_ctl_status) & ~0x40));
+ /* Disable MCKE isolation */
+ gpio_set_value(2, 0);
+ udelay(1);
+}
+#endif
diff --git a/board/freescale/t102xrdb/t102xrdb.h b/board/freescale/t102xrdb/t102xrdb.h
new file mode 100644
index 0000000..2f23579
--- /dev/null
+++ b/board/freescale/t102xrdb/t102xrdb.h
@@ -0,0 +1,13 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __T1024_RDB_H__
+#define __T1024_RDB_H__
+
+void fdt_fixup_board_enet(void *blob);
+void pci_of_setup(void *blob, bd_t *bd);
+
+#endif
diff --git a/board/freescale/t102xrdb/tlb.c b/board/freescale/t102xrdb/tlb.c
new file mode 100644
index 0000000..8269b3d
--- /dev/null
+++ b/board/freescale/t102xrdb/tlb.c
@@ -0,0 +1,117 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+ /* TLB 0 - for temp stack in cache */
+ SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR,
+ CONFIG_SYS_INIT_RAM_ADDR_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
+ CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
+ CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
+ CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+
+ /* TLB 1 */
+ /* *I*** - Covers boot page */
+#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L3_ADDR)
+ /*
+ * *I*G - L3SRAM. When L3 is used as 256K SRAM, the address of the
+ * SRAM is at 0xfffc0000, it covered the 0xfffff000.
+ */
+ SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 0, BOOKE_PAGESZ_256K, 1),
+#else
+ SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 0, BOOKE_PAGESZ_4K, 1),
+#endif
+
+ /* *I*G* - CCSRBAR */
+ SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 1, BOOKE_PAGESZ_16M, 1),
+
+ /* *I*G* - Flash, localbus */
+ /* This will be changed to *I*G* after relocation to RAM. */
+ SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
+ MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
+ 0, 2, BOOKE_PAGESZ_256M, 1),
+
+#ifndef CONFIG_SPL_BUILD
+ /* *I*G* - PCI */
+ SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 3, BOOKE_PAGESZ_1G, 1),
+
+ /* *I*G* - PCI I/O */
+ SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 4, BOOKE_PAGESZ_256K, 1),
+
+ /* Bman/Qman */
+#ifdef CONFIG_SYS_BMAN_MEM_PHYS
+ SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE, CONFIG_SYS_BMAN_MEM_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 5, BOOKE_PAGESZ_16M, 1),
+ SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE + 0x01000000,
+ CONFIG_SYS_BMAN_MEM_PHYS + 0x01000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 6, BOOKE_PAGESZ_16M, 1),
+#endif
+#ifdef CONFIG_SYS_QMAN_MEM_PHYS
+ SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE, CONFIG_SYS_QMAN_MEM_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 7, BOOKE_PAGESZ_16M, 1),
+ SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE + 0x01000000,
+ CONFIG_SYS_QMAN_MEM_PHYS + 0x01000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 8, BOOKE_PAGESZ_16M, 1),
+#endif
+#endif
+#ifdef CONFIG_SYS_DCSRBAR_PHYS
+ SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 9, BOOKE_PAGESZ_4M, 1),
+#endif
+#ifdef CONFIG_SYS_NAND_BASE
+ SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 10, BOOKE_PAGESZ_64K, 1),
+#endif
+#ifdef CONFIG_SYS_CPLD_BASE
+ SET_TLB_ENTRY(1, CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_BASE_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 11, BOOKE_PAGESZ_256K, 1),
+#endif
+
+#if defined(CONFIG_RAMBOOT_PBL) && !defined(CONFIG_SPL_BUILD)
+ SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 12, BOOKE_PAGESZ_1G, 1),
+ SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
+ CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 13, BOOKE_PAGESZ_1G, 1)
+#endif
+ /* entry 14 and 15 has been used hard coded, they will be disabled
+ * in cpu_init_f, so if needed more, will use entry 16 later.
+ */
+};
+
+int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/freescale/t104xrdb/spl.c b/board/freescale/t104xrdb/spl.c
index 3822a37..e394b12 100644
--- a/board/freescale/t104xrdb/spl.c
+++ b/board/freescale/t104xrdb/spl.c
@@ -34,20 +34,26 @@ unsigned long get_board_ddr_clk(void)
void board_init_f(ulong bootflag)
{
u32 plat_ratio, sys_clk, uart_clk;
-#ifdef CONFIG_SPL_NAND_BOOT
+#if defined(CONFIG_SPL_NAND_BOOT) && defined(CONFIG_A008044_WORKAROUND)
u32 porsr1, pinctl;
+ u32 svr = get_svr();
#endif
ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
-#ifdef CONFIG_SPL_NAND_BOOT
- /*
- * There is T1040 SoC issue where NOR, FPGA are inaccessible during
- * NAND boot because IFC signals > IFC_AD7 are not enabled.
- * This workaround changes RCW source to make all signals enabled.
- */
- porsr1 = in_be32(&gur->porsr1);
- pinctl = ((porsr1 & ~(FSL_CORENET_CCSR_PORSR1_RCW_MASK)) | 0x24800000);
- out_be32((unsigned int *)(CONFIG_SYS_DCSRBAR + 0x20000), pinctl);
+#if defined(CONFIG_SPL_NAND_BOOT) && defined(CONFIG_A008044_WORKAROUND)
+ if (IS_SVR_REV(svr, 1, 0)) {
+ /*
+ * There is T1040 SoC issue where NOR, FPGA are inaccessible
+ * during NAND boot because IFC signals > IFC_AD7 are not
+ * enabled. This workaround changes RCW source to make all
+ * signals enabled.
+ */
+ porsr1 = in_be32(&gur->porsr1);
+ pinctl = ((porsr1 & ~(FSL_CORENET_CCSR_PORSR1_RCW_MASK))
+ | 0x24800000);
+ out_be32((unsigned int *)(CONFIG_SYS_DCSRBAR + 0x20000),
+ pinctl);
+ }
#endif
/* Memcpy existing GD at CONFIG_SPL_GD_ADDR */
diff --git a/board/freescale/t208xqds/ddr.h b/board/freescale/t208xqds/ddr.h
index ed52fef6..9c26fdf 100644
--- a/board/freescale/t208xqds/ddr.h
+++ b/board/freescale/t208xqds/ddr.h
@@ -28,17 +28,16 @@ static const struct board_specific_parameters udimm0[] = {
* num| hi| rank| clk| wrlvl | wrlvl | wrlvl |
* ranks| mhz| GB |adjst| start | ctl2 | ctl3 |
*/
- {2, 1200, 0, 5, 7, 0x0808090a, 0x0b0c0c0a},
- {2, 1500, 0, 5, 6, 0x07070809, 0x0a0b0b09},
- {2, 1600, 0, 5, 8, 0x090b0b0d, 0x0d0e0f0b},
- {2, 1700, 0, 4, 7, 0x080a0a0c, 0x0c0d0e0a},
- {2, 1900, 0, 5, 9, 0x0a0b0c0e, 0x0f10120c},
- {2, 2140, 0, 4, 8, 0x090a0b0d, 0x0e0f110b},
+ {2, 1200, 0, 5, 7, 0x0708090a, 0x0b0c0d09},
+ {2, 1400, 0, 5, 7, 0x08090a0c, 0x0d0e0f0a},
+ {2, 1700, 0, 5, 8, 0x090a0b0c, 0x0e10110c},
+ {2, 1900, 0, 5, 8, 0x090b0c0f, 0x1012130d},
+ {2, 2140, 0, 5, 8, 0x090b0c0f, 0x1012130d},
{1, 1200, 0, 5, 7, 0x0808090a, 0x0b0c0c0a},
{1, 1500, 0, 5, 6, 0x07070809, 0x0a0b0b09},
{1, 1600, 0, 5, 8, 0x090b0b0d, 0x0d0e0f0b},
- {1, 1700, 0, 4, 7, 0x080a0a0c, 0x0c0d0e0a},
- {1, 1900, 0, 5, 9, 0x0a0b0c0e, 0x0f10120c},
+ {1, 1700, 0, 4, 8, 0x080a0a0c, 0x0c0d0e0a},
+ {1, 1900, 0, 5, 8, 0x090a0c0d, 0x0e0f110c},
{1, 2140, 0, 4, 8, 0x090a0b0d, 0x0e0f110b},
{}
};
diff --git a/board/freescale/t208xqds/t2080_rcw.cfg b/board/freescale/t208xqds/t2080_rcw.cfg
index 972dedc..52a1652 100644
--- a/board/freescale/t208xqds/t2080_rcw.cfg
+++ b/board/freescale/t208xqds/t2080_rcw.cfg
@@ -1,8 +1,16 @@
#PBL preamble and RCW header
aa55aa55 010e0100
-#SerDes Protocol: 0x66_0x16
-#Core/DDR: 1533Mhz/2133MT/s
-12100017 15000000 00000000 00000000
-66150002 00008400 e8104000 c1000000
+
+#For T2080 v1.0
+#SerDes=0x66_0x16, Core=1533MHz, DDR=2133MT/s
+#12100017 15000000 00000000 00000000
+#66150002 00008400 e8104000 c1000000
+#00000000 00000000 00000000 000307fc
+#00000000 00000000 00000000 00000004
+
+#For T2080 v1.1
+#SerDes=0x66_0x15, Core=1800MHz, DDR=1867MT/s
+0c070012 0e000000 00000000 00000000
+66150002 00000000 e8104000 c1000000
00000000 00000000 00000000 000307fc
00000000 00000000 00000000 00000004
diff --git a/board/freescale/t208xqds/t208xqds.c b/board/freescale/t208xqds/t208xqds.c
index 5c470c3..7c89cd5 100644
--- a/board/freescale/t208xqds/t208xqds.c
+++ b/board/freescale/t208xqds/t208xqds.c
@@ -20,6 +20,7 @@
#include "../common/qixis.h"
#include "../common/vsc3316_3308.h"
+#include "../common/vid.h"
#include "t208xqds.h"
#include "t208xqds_qixis.h"
@@ -86,6 +87,11 @@ int select_i2c_ch_pca9547(u8 ch)
return 0;
}
+int i2c_multiplexer_select_vid_channel(u8 channel)
+{
+ return select_i2c_ch_pca9547(channel);
+}
+
int brd_mux_lane_to_slot(void)
{
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
@@ -358,6 +364,13 @@ int board_early_init_r(void)
/* Disable remote I2C connection to qixis fpga */
QIXIS_WRITE(brdcfg[5], QIXIS_READ(brdcfg[5]) & ~BRDCFG5_IRE);
+ /*
+ * Adjust core voltage according to voltage ID
+ * This function changes I2C mux to channel 2.
+ */
+ if (adjust_vdd(0))
+ printf("Warning: Adjusting core voltage failed.\n");
+
brd_mux_lane_to_slot();
select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
diff --git a/board/freescale/t208xrdb/t2080_rcw.cfg b/board/freescale/t208xrdb/t2080_rcw.cfg
index 15e1bf4..59025ea 100644
--- a/board/freescale/t208xrdb/t2080_rcw.cfg
+++ b/board/freescale/t208xrdb/t2080_rcw.cfg
@@ -1,8 +1,16 @@
-#PBL preamble and RCW header for T2080RDB
+#PBL preamble and RCW header
aa55aa55 010e0100
-#SerDes Protocol: 0x66_0x16
-#Core/DDR: 1533Mhz/1600MT/s
-120c0017 15000000 00000000 00000000
-66150002 00008400 ec104000 c1000000
-00000000 00000000 00000000 000307fc
+
+#For T2080 v1.0
+#SerDes=0x66_0x16, Core=1533MHz, DDR=1600MT/s
+#120c0017 15000000 00000000 00000000
+#66150002 00008400 ec104000 c1000000
+#00000000 00000000 00000000 000307fc
+#00000000 00000000 00000000 00000004
+
+#For T2080 v1.1
+#SerDes=0x66_0x15, Core:1800MHz, DDR:1600MT/s
+1206001b 15000000 00000000 00000000
+66150002 00000000 e8104000 c1000000
+00800000 00000000 00000000 000307fc
00000000 00000000 00000000 00000004
diff --git a/board/google/chromebook_link/Kconfig b/board/google/chromebook_link/Kconfig
index 3a4f557..7f79fd2 100644
--- a/board/google/chromebook_link/Kconfig
+++ b/board/google/chromebook_link/Kconfig
@@ -19,6 +19,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy
select SOUTHBRIDGE_INTEL_C216
select HAVE_ACPI_RESUME
select MARK_GRAPHICS_MEM_WRCOMB
+ select BOARD_ROMSIZE_KB_8192
config MMCONF_BASE_ADDRESS
hex
diff --git a/board/google/chromebook_link/link.c b/board/google/chromebook_link/link.c
index 1822237..4d95c1c 100644
--- a/board/google/chromebook_link/link.c
+++ b/board/google/chromebook_link/link.c
@@ -7,6 +7,9 @@
#include <common.h>
#include <cros_ec.h>
#include <asm/gpio.h>
+#include <asm/io.h>
+#include <asm/pci.h>
+#include <asm/arch/pch.h>
int arch_early_init_r(void)
{
@@ -121,3 +124,40 @@ int board_early_init_f(void)
return 0;
}
+
+void setup_pch_gpios(u32 gpiobase, const struct pch_gpio_map *gpio)
+{
+ /* GPIO Set 1 */
+ if (gpio->set1.level)
+ outl(*((u32 *)gpio->set1.level), gpiobase + GP_LVL);
+ if (gpio->set1.mode)
+ outl(*((u32 *)gpio->set1.mode), gpiobase + GPIO_USE_SEL);
+ if (gpio->set1.direction)
+ outl(*((u32 *)gpio->set1.direction), gpiobase + GP_IO_SEL);
+ if (gpio->set1.reset)
+ outl(*((u32 *)gpio->set1.reset), gpiobase + GP_RST_SEL1);
+ if (gpio->set1.invert)
+ outl(*((u32 *)gpio->set1.invert), gpiobase + GPI_INV);
+ if (gpio->set1.blink)
+ outl(*((u32 *)gpio->set1.blink), gpiobase + GPO_BLINK);
+
+ /* GPIO Set 2 */
+ if (gpio->set2.level)
+ outl(*((u32 *)gpio->set2.level), gpiobase + GP_LVL2);
+ if (gpio->set2.mode)
+ outl(*((u32 *)gpio->set2.mode), gpiobase + GPIO_USE_SEL2);
+ if (gpio->set2.direction)
+ outl(*((u32 *)gpio->set2.direction), gpiobase + GP_IO_SEL2);
+ if (gpio->set2.reset)
+ outl(*((u32 *)gpio->set2.reset), gpiobase + GP_RST_SEL2);
+
+ /* GPIO Set 3 */
+ if (gpio->set3.level)
+ outl(*((u32 *)gpio->set3.level), gpiobase + GP_LVL3);
+ if (gpio->set3.mode)
+ outl(*((u32 *)gpio->set3.mode), gpiobase + GPIO_USE_SEL3);
+ if (gpio->set3.direction)
+ outl(*((u32 *)gpio->set3.direction), gpiobase + GP_IO_SEL3);
+ if (gpio->set3.reset)
+ outl(*((u32 *)gpio->set3.reset), gpiobase + GP_RST_SEL3);
+}
diff --git a/board/hermes/Kconfig b/board/hermes/Kconfig
deleted file mode 100644
index deb37fd..0000000
--- a/board/hermes/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-if TARGET_HERMES
-
-config SYS_BOARD
- default "hermes"
-
-config SYS_CONFIG_NAME
- default "hermes"
-
-endif
diff --git a/board/hermes/MAINTAINERS b/board/hermes/MAINTAINERS
deleted file mode 100644
index a596dad..0000000
--- a/board/hermes/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-HERMES BOARD
-M: Wolfgang Denk <wd@denx.de>
-S: Maintained
-F: board/hermes/
-F: include/configs/hermes.h
-F: configs/hermes_defconfig
diff --git a/board/hermes/Makefile b/board/hermes/Makefile
deleted file mode 100644
index ccca520..0000000
--- a/board/hermes/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y = hermes.o flash.o
diff --git a/board/hermes/flash.c b/board/hermes/flash.c
deleted file mode 100644
index 38d3cd3..0000000
--- a/board/hermes/flash.c
+++ /dev/null
@@ -1,444 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static int write_byte (flash_info_t *info, ulong dest, uchar data);
-static void flash_get_offsets (ulong base, flash_info_t *info);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
- unsigned long size;
- int i;
-
- /* Init: no FLASHes known */
- for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- }
-
- /* Static FLASH Bank configuration here - FIXME XXX */
-
- size = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
-
- if (flash_info[0].flash_id == FLASH_UNKNOWN) {
- printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
- size, size<<20);
- }
-
- /* Remap FLASH according to real size */
- memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size & 0xFFFF8000);
- memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) |
- (memctl->memc_br0 & ~(BR_BA_MSK));
-
- /* Re-do sizing to get full correct info */
- size = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
- flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
- /* monitor protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
- &flash_info[0]);
-#endif
-
- flash_info[0].size = size;
-
- return (size);
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
- int i;
-
- /* set up sector start address table */
- if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00004000;
- info->start[2] = base + 0x00006000;
- info->start[3] = base + 0x00008000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00010000) - 0x00030000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00004000;
- info->start[i--] = base + info->size - 0x00006000;
- info->start[i--] = base + info->size - 0x00008000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00010000;
- }
- }
-
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t *info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD: printf ("AMD "); break;
- case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
- default: printf ("Unknown Vendor "); break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n");
- break;
- case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n");
- break;
- case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n");
- break;
- case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n");
- break;
- default: printf ("Unknown Chip Type\n");
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i=0; i<info->sector_count; ++i) {
- if ((i % 5) == 0)
- printf ("\n ");
- printf (" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " "
- );
- }
- printf ("\n");
- return;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-static ulong flash_get_size (vu_long *addr, flash_info_t *info)
-{
- short i;
- uchar value;
- vu_char *caddr = (vu_char *)addr;
- ulong base = (ulong)addr;
-
-
- /* Write auto select command: read Manufacturer ID */
- caddr[0x0AAA] = 0xAA;
- caddr[0x0555] = 0x55;
- caddr[0x0AAA] = 0x90;
-
- value = caddr[0];
- switch (value) {
- case (AMD_MANUFACT & 0xFF):
- info->flash_id = FLASH_MAN_AMD;
- break;
- case (FUJ_MANUFACT & 0xFF):
- info->flash_id = FLASH_MAN_FUJ;
- break;
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- return (0); /* no or unknown flash */
- }
-
- value = caddr[2]; /* device ID */
-
- switch (value) {
- case (AMD_ID_LV400T & 0xFF):
- info->flash_id += FLASH_AM400T;
- info->sector_count = 11;
- info->size = 0x00080000;
- break; /* => 512 kB */
-
- case (AMD_ID_LV400B & 0xFF):
- info->flash_id += FLASH_AM400B;
- info->sector_count = 11;
- info->size = 0x00080000;
- break; /* => 512 kB */
-
- case (AMD_ID_LV800T & 0xFF):
- info->flash_id += FLASH_AM800T;
- info->sector_count = 19;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case (AMD_ID_LV800B & 0xFF):
- info->flash_id += FLASH_AM800B;
- info->sector_count = 19;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case (AMD_ID_LV160T & 0xFF):
- info->flash_id += FLASH_AM160T;
- info->sector_count = 35;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case (AMD_ID_LV160B & 0xFF):
- info->flash_id += FLASH_AM160B;
- info->sector_count = 35;
- info->size = 0x00200000;
- break; /* => 2 MB */
-#if 0 /* enable when device IDs are available */
- case (AMD_ID_LV320T & 0xFF):
- info->flash_id += FLASH_AM320T;
- info->sector_count = 67;
- info->size = 0x00400000;
- break; /* => 4 MB */
-
- case (AMD_ID_LV320B & 0xFF):
- info->flash_id += FLASH_AM320B;
- info->sector_count = 67;
- info->size = 0x00400000;
- break; /* => 4 MB */
-#endif
- default:
- info->flash_id = FLASH_UNKNOWN;
- return (0); /* => no or unknown flash */
-
- }
-
- /* set up sector start address table */
- if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00004000;
- info->start[2] = base + 0x00006000;
- info->start[3] = base + 0x00008000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00010000) - 0x00030000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00004000;
- info->start[i--] = base + info->size - 0x00006000;
- info->start[i--] = base + info->size - 0x00008000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00010000;
- }
- }
-
- /* check for protected sectors */
- for (i = 0; i < info->sector_count; i++) {
- /* read sector protection: D0 = 1 if protected */
- caddr = (volatile unsigned char *)(info->start[i]);
- info->protect[i] = caddr[4] & 1;
- }
-
- /*
- * Prevent writes to uninitialized FLASH.
- */
- if (info->flash_id != FLASH_UNKNOWN) {
- caddr = (vu_char *)info->start[0];
-
- *caddr = 0xF0; /* reset bank */
- }
-
- return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
- vu_char *addr = (vu_char*)(info->start[0]);
- int flag, prot, sect, l_sect;
- ulong start, now, last;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- if ((info->flash_id == FLASH_UNKNOWN) ||
- (info->flash_id > FLASH_AMD_COMP)) {
- printf ("Can't erase unknown flash type %08lx - aborted\n",
- info->flash_id);
- return 1;
- }
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- l_sect = -1;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- addr[0x0AAA] = 0xAA;
- addr[0x0555] = 0x55;
- addr[0x0AAA] = 0x80;
- addr[0x0AAA] = 0xAA;
- addr[0x0555] = 0x55;
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- addr = (vu_char*)(info->start[sect]);
- addr[0] = 0x30;
- l_sect = sect;
- }
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0)
- goto DONE;
-
- start = get_timer (0);
- last = start;
- addr = (vu_char*)(info->start[l_sect]);
- while ((addr[0] & 0x80) != 0x80) {
- if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- return 1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- putc ('.');
- last = now;
- }
- }
-
-DONE:
- /* reset to read mode */
- addr = (vu_char *)info->start[0];
- addr[0] = 0xF0; /* reset bank */
-
- printf (" done\n");
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- int rc;
-
- while (cnt > 0) {
- if ((rc = write_byte(info, addr++, *src++)) != 0) {
- return (rc);
- }
- --cnt;
- }
-
- return (0);
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_byte (flash_info_t *info, ulong dest, uchar data)
-{
- vu_char *addr = (vu_char*)(info->start[0]);
- ulong start;
- int flag;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*((vu_char *)dest) & data) != data) {
- return (2);
- }
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- addr[0x0AAA] = 0xAA;
- addr[0x0555] = 0x55;
- addr[0x0AAA] = 0xA0;
-
- *((vu_char *)dest) = data;
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* data polling for D7 */
- start = get_timer (0);
- while ((*((vu_char *)dest) & 0x80) != (data & 0x80)) {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- return (1);
- }
- }
- return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
diff --git a/board/hermes/hermes.c b/board/hermes/hermes.c
deleted file mode 100644
index 6126b73..0000000
--- a/board/hermes/hermes.c
+++ /dev/null
@@ -1,590 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <commproc.h>
-#include <mpc8xx.h>
-
-#ifdef CONFIG_SHOW_BOOT_PROGRESS
-# include <status_led.h>
-# define SHOW_BOOT_PROGRESS(arg) bootstage_mark(arg)
-#else
-# define SHOW_BOOT_PROGRESS(arg)
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-
-static long int dram_size (long int, long int *, long int);
-static ulong board_init (void);
-static void send_smi_frame (volatile scc_t * sp, volatile cbd_t * bd,
- uchar * msg);
-
-/* ------------------------------------------------------------------------- */
-
-#define _NOT_USED_ 0xFFFFFFFF
-
-const uint sdram_table[] = {
- /*
- * Single Read. (Offset 0 in UPMA RAM)
- */
- 0x1f07fc04, 0xeeaefc04, 0x11adfc04, 0xefbbbc00,
- 0x1ff77c47, /* last */
- /*
- * SDRAM Initialization (offset 5 in UPMA RAM)
- *
- * This is no UPM entry point. The following definition uses
- * the remaining space to establish an initialization
- * sequence, which is executed by a RUN command.
- *
- */
- 0x1fe77c35, 0xffaffc34, 0x1fa57c35, /* last */
- /*
- * Burst Read. (Offset 8 in UPMA RAM)
- */
- 0x1f07fc04, 0xeeaefc04, 0x10adfc04, 0xf0affc00,
- 0xf0affc00, 0xf1affc00, 0xefbbbc00, 0x1ff77c47, /* last */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /*
- * Single Write. (Offset 18 in UPMA RAM)
- */
- 0x1f27fc04, 0xeeaebc00, 0x01b93c04, 0x1ff77c47, /* last */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /*
- * Burst Write. (Offset 20 in UPMA RAM)
- */
- 0x1f07fc04, 0xeeaebc00, 0x10ad4c00, 0xf0afcc00,
- 0xf0afcc00, 0xe1bb8c06, 0x1ff77c47, /* last */
- _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /*
- * Refresh (Offset 30 in UPMA RAM)
- */
- 0x1ff5fc84, 0xfffffc04, 0xfffffc04, 0xfffffc04,
- 0xfffffc84, 0xfffffc07, /* last */
- _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /*
- * Exception. (Offset 3c in UPMA RAM)
- */
- 0x7ffffc07, /* last */
- _NOT_USED_, _NOT_USED_, _NOT_USED_,
-};
-
-/* ------------------------------------------------------------------------- */
-
-
-/*
- * Check Board Identity:
- *
- * Test ID string (HERMES...)
- *
- * Return code for board revision and network speed
- */
-
-int checkboard (void)
-{
- char buf[64];
- int i;
- int l = getenv_f("serial#", buf, sizeof(buf));
-
- puts ("Board: ");
-
- if (l < 0 || strncmp(buf, "HERMES", 6)) {
- puts ("### No HW ID - assuming HERMES-PRO");
- } else {
- for (i = 0; i < l; i++) {
- if (buf[i] == ' ')
- break;
- putc (buf[i]);
- }
- }
-
- gd->board_type = board_init ();
-
- printf (" Rev. %ld.x\n", (gd->board_type >> 16));
-
- return (0);
-}
-
-/* ------------------------------------------------------------------------- */
-
-phys_size_t initdram (int board_type)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
- long int size, size8, size9;
-
- upmconfig (UPMA, (uint *) sdram_table,
- sizeof (sdram_table) / sizeof (uint));
-
- /*
- * Preliminary prescaler for refresh
- */
- memctl->memc_mptpr = 0x0400;
-
- memctl->memc_mar = 0x00000088;
-
- /*
- * Map controller banks 1 to the SDRAM banks at preliminary address
- */
- memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
- memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
-
- /* HERMES-PRO boards have only one bank SDRAM */
-
-
- udelay (200);
-
- /* perform SDRAM initializsation sequence */
-
- memctl->memc_mamr = 0xD0802114;
- memctl->memc_mcr = 0x80002105;
- udelay (1);
- memctl->memc_mamr = 0xD0802118;
- memctl->memc_mcr = 0x80002130;
- udelay (1);
- memctl->memc_mamr = 0xD0802114;
- memctl->memc_mcr = 0x80002106;
-
- udelay (1000);
-
- /*
- * Check Bank 0 Memory Size for re-configuration
- *
- * try 8 column mode
- */
- size8 = dram_size (CONFIG_SYS_MAMR_8COL, (long *) SDRAM_BASE_PRELIM,
- SDRAM_MAX_SIZE);
-
- udelay (1000);
-
- /*
- * try 9 column mode
- */
- size9 = dram_size (CONFIG_SYS_MAMR_9COL, (long *) SDRAM_BASE_PRELIM,
- SDRAM_MAX_SIZE);
-
- if (size8 < size9) { /* leave configuration at 9 columns */
- size = size9;
-/* debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20); */
- } else { /* back to 8 columns */
- size = size8;
- memctl->memc_mamr = CONFIG_SYS_MAMR_8COL;
- udelay (500);
-/* debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20); */
- }
-
- udelay (1000);
-
- memctl->memc_or1 = ((-size) & 0xFFFF0000) | SDRAM_TIMING;
- memctl->memc_br1 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
-
- udelay (10000);
-
- return (size);
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check memory range for valid RAM. A simple memory test determines
- * the actually available RAM size between addresses `base' and
- * `base + maxsize'. Some (not all) hardware errors are detected:
- * - short between address lines
- * - short between data lines
- */
-
-static long int dram_size (long int mamr_value, long int *base,
- long int maxsize)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
-
- memctl->memc_mamr = mamr_value;
-
- return (get_ram_size(base, maxsize));
-}
-
-/* ------------------------------------------------------------------------- */
-
-#define PB_LED_3 0x00020000 /* Status LED's */
-#define PB_LED_2 0x00010000
-#define PB_LED_1 0x00008000
-#define PB_LED_0 0x00004000
-
-#define PB_LED_ALL (PB_LED_0 | PB_LED_1 | PB_LED_2 | PB_LED_3)
-
-#define PC_REP_SPD1 0x00000800
-#define PC_REP_SPD0 0x00000400
-
-#define PB_RESET_2081 0x00000020 /* Reset PEB2081 */
-
-#define PB_MAI_4 0x00000010 /* Configuration */
-#define PB_MAI_3 0x00000008
-#define PB_MAI_2 0x00000004
-#define PB_MAI_1 0x00000002
-#define PB_MAI_0 0x00000001
-
-#define PB_MAI_ALL (PB_MAI_0 | PB_MAI_1 | PB_MAI_2 | PB_MAI_3 | PB_MAI_4)
-
-
-#define PC_REP_MGRPRS 0x0200
-#define PC_REP_SPD 0x0040 /* Select 100 Mbps */
-#define PC_REP_RES 0x0004
-#define PC_BIT14 0x0002 /* ??? */
-#define PC_BIT15 0x0001 /* ??? ENDSL ?? */
-
-/* ------------------------------------------------------------------------- */
-
-static ulong board_init (void)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- ulong reg, revision, speed = 100;
- int ethspeed;
- char *s;
-
- if ((s = getenv ("ethspeed")) != NULL) {
- if (strcmp (s, "100") == 0) {
- ethspeed = 100;
- } else if (strcmp (s, "10") == 0) {
- ethspeed = 10;
- } else {
- ethspeed = 0;
- }
- } else {
- ethspeed = 0;
- }
-
- /* Configure Port B Output Pins => 0x0003cc3F */
- reg = PB_LED_ALL | PC_REP_SPD1 | PC_REP_SPD0 | PB_RESET_2081 |
- PB_MAI_ALL;
- immr->im_cpm.cp_pbpar &= ~reg;
- immr->im_cpm.cp_pbodr &= ~reg;
- immr->im_cpm.cp_pbdat &= ~reg; /* all 0 */
- immr->im_cpm.cp_pbdir |= reg;
-
- /* Check hardware revision */
- if ((immr->im_ioport.iop_pcdat & 0x0003) == 0x0003) {
- /*
- * Revision 3.x hardware
- */
- revision = 3;
-
- immr->im_ioport.iop_pcdat = 0x0240;
- immr->im_ioport.iop_pcdir = (PC_REP_MGRPRS | PC_REP_SPD | PC_REP_RES | PC_BIT14); /* = 0x0246 */
- immr->im_ioport.iop_pcdat |= PC_REP_RES;
- } else {
- immr->im_ioport.iop_pcdat = 0x0002;
- immr->im_ioport.iop_pcdir = (PC_REP_MGRPRS | PC_REP_RES | PC_BIT14 | PC_BIT15); /* = 0x0207 */
-
- if ((immr->im_ioport.iop_pcdat & PC_REP_SPD) == 0) {
- /*
- * Revision 2.x hardware: PC9 connected to PB21
- */
- revision = 2;
-
- if (ethspeed == 0) {
- /* both 10 and 100 Mbps allowed:
- * select 10 Mbps and autonegotiation
- */
- puts (" [10+100]");
- immr->im_cpm.cp_pbdat = 0; /* SPD1:SPD0 = 0:0 - autonegot. */
- speed = 10;
- } else if (ethspeed == 10) {
- /* we are asked for 10 Mbps,
- * so select 10 Mbps
- */
- puts (" [10]");
- immr->im_cpm.cp_pbdat = 0; /* ??? */
- speed = 10;
- } else {
- /* anything else:
- * select 100 Mbps
- */
- puts (" [100]");
- immr->im_cpm.cp_pbdat = PC_REP_SPD0 | PC_REP_SPD1;
- /* SPD1:SPD0 = 1:1 - 100 Mbps */
- speed = 100;
- }
- immr->im_ioport.iop_pcdat |= (PC_REP_RES | PC_BIT14);
-
- /* must be run from RAM */
- /* start_lxt980 (speed); */
- /*************************/
- } else {
- /*
- * Revision 1.x hardware
- */
- revision = 1;
-
- immr->im_ioport.iop_pcdat = PC_REP_MGRPRS | PC_BIT14; /* = 0x0202 */
- immr->im_ioport.iop_pcdir = (PC_REP_MGRPRS | PC_REP_SPD | PC_REP_RES | PC_BIT14 | PC_BIT15); /* = 0x0247 */
-
- if (ethspeed == 0) {
- /* both 10 and 100 Mbps allowed:
- * select 100 Mbps and autonegotiation
- */
- puts (" [10+100]");
- immr->im_cpm.cp_pbdat = 0; /* SPD1:SPD0 = 0:0 - autonegot. */
- immr->im_ioport.iop_pcdat |= PC_REP_SPD;
- } else if (ethspeed == 10) {
- /* we are asked for 10 Mbps,
- * so select 10 Mbps
- */
- puts (" [10]");
- immr->im_cpm.cp_pbdat = PC_REP_SPD0; /* SPD1:SPD0 = 0:1 - 10 Mbps */
- } else {
- /* anything else:
- * select 100 Mbps
- */
- puts (" [100]");
- immr->im_cpm.cp_pbdat = PC_REP_SPD0 | PC_REP_SPD1;
- /* SPD1:SPD0 = 1:1 - 100 Mbps */
- immr->im_ioport.iop_pcdat |= PC_REP_SPD;
- }
-
- immr->im_ioport.iop_pcdat |= PC_REP_RES;
- }
- }
- SHOW_BOOT_PROGRESS(BOOTSTAGE_ID_CHECK_MAGIC);
-
- return ((revision << 16) | (speed & 0xFFFF));
-}
-
-/* ------------------------------------------------------------------------- */
-
-#define SCC_SM 1 /* Index => SCC2 */
-#define PROFF PROFF_SCC2
-
-#define SMI_MSGLEN 8 /* Length of SMI Messages */
-
-#define PHYGPCR_ADDR 0x109 /* Port Enable */
-#define PHYPCR_ADDR 0x132 /* PHY Port Control Reg. (port 1) */
-#define LEDPCR_ADDR 0x141 /* LED Port Control Reg. */
-#define RPRESET_ADDR 0x144 /* Repeater Reset */
-
-#define PHYPCR_SPEED 0x2000 /* on for 100 Mbps, off for 10 Mbps */
-#define PHYPCR_AN 0x1000 /* on to enable Auto-Negotiation */
-#define PHYPCR_REST_AN 0x0200 /* on to restart Auto-Negotiation */
-#define PHYPCR_FDX 0x0100 /* on for Full Duplex, off for HDX */
-#define PHYPCR_COLT 0x0080 /* on to enable COL signal test */
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Must run from RAM:
- * uses parameter RAM area which is used for stack while running from ROM
- */
-void hermes_start_lxt980 (int speed)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- volatile cpm8xx_t *cp = (cpm8xx_t *) & (immr->im_cpm);
- volatile scc_t *sp = (scc_t *) & (cp->cp_scc[SCC_SM]);
- volatile cbd_t *bd;
- volatile hdlc_pram_t *hp;
- uchar smimsg[SMI_MSGLEN];
- ushort phypcrval;
- uint bd_off;
- int pnr;
-
- printf ("LXT9880: %3d Mbps\n", speed);
-
- immr->im_ioport.iop_paodr |= 0x0008; /* init PAODR: PA12 (TXD2) open drain */
- immr->im_ioport.iop_papar |= 0x400c; /* init PAPAR: TXD2, RXD2, BRGO4 */
- immr->im_ioport.iop_padir &= 0xbff3; /* init PADIR: BRGO4 */
- immr->im_ioport.iop_padir |= 0x4000;
-
- /* get temporary BD; no need for permanent alloc */
- bd_off = dpram_base_align (8);
-
- bd = (cbd_t *) (immr->im_cpm.cp_dpmem + bd_off);
-
- bd->cbd_bufaddr = 0;
- bd->cbd_datlen = 0;
- bd->cbd_sc = BD_SC_WRAP | BD_SC_LAST | BD_SC_INTRPT | BD_SC_TC;
-
- /* init. baudrate generator BRG4 */
- cp->cp_brgc4 = (0x00010000 | (50 << 1)); /* output 1 MHz */
-
- cp->cp_sicr &= 0xFFFF00FF; /* SICR: mask SCC2 */
- cp->cp_sicr |= 0x00001B00; /* SICR: SCC2 clk BRG4 */
-
- /* init SCC_SM register */
- sp->scc_psmr = 0x0000; /* init PSMR: no additional flags */
- sp->scc_todr = 0x0000;
- sp->scc_dsr = 0x7e7e;
-
- /* init. SCC_SM parameter area */
- hp = (hdlc_pram_t *) & cp->cp_dparam[PROFF];
-
- hp->tbase = bd_off; /* offset from beginning of DPRAM */
-
- hp->rfcr = 0x18;
- hp->tfcr = 0x18;
- hp->mrblr = 10;
-
- hp->c_mask = 0x0000f0b8;
- hp->c_pres = 0x0000ffff;
-
- hp->disfc = 0;
- hp->crcec = 0;
- hp->abtsc = 0;
- hp->nmarc = 0;
- hp->retrc = 0;
-
- hp->mflr = 10;
-
- hp->rfthr = 1;
-
- hp->hmask = 0;
- hp->haddr1 = 0;
- hp->haddr2 = 0;
- hp->haddr3 = 0;
- hp->haddr4 = 0;
-
- cp->cp_cpcr = SCC_SM << 6 | 0x0001; /* SCC_SM: init TX/RX params */
- while (cp->cp_cpcr & CPM_CR_FLG);
-
- /* clear all outstanding SCC events */
- sp->scc_scce = ~0;
-
- /* enable transmitter: GSMR_L: TPL=2(16bits), TPP=3(all ones), ENT */
- sp->scc_gsmrh = 0;
- sp->scc_gsmrl |= SCC_GSMRL_TPL_16 | SCC_GSMRL_TPP_ALL1 |
- SCC_GSMRL_ENT | SCC_GSMRL_MODE_HDLC;
-
-#if 0
- smimsg[0] = 0x00; /* CHIP/HUB ID */
- smimsg[1] = 0x38; /* WRITE CMD */
- smimsg[2] = (RPRESET_ADDR << 4) & 0xf0;
- smimsg[3] = RPRESET_ADDR >> 4;
- smimsg[4] = 0x01;
- smimsg[5] = 0x00;
- smimsg[6] = 0x00;
- smimsg[7] = 0x00;
-
- send_smi_frame (sp, bd, smimsg);
-#endif
-
- smimsg[0] = 0x7f; /* BROADCAST */
- smimsg[1] = 0x34; /* ASSIGN HUB ID */
- smimsg[2] = 0x00;
- smimsg[3] = 0x00;
- smimsg[4] = 0x00; /* HUB ID = 0 */
- smimsg[5] = 0x00;
- smimsg[6] = 0x00;
- smimsg[7] = 0x00;
-
- send_smi_frame (sp, bd, smimsg);
-
- smimsg[0] = 0x7f; /* BROADCAST */
- smimsg[1] = 0x3c; /* SET ARBOUT TO 0 */
- smimsg[2] = 0x00; /* ADDRESS = 0 */
- smimsg[3] = 0x00;
- smimsg[4] = 0x00; /* DATA = 0 */
- smimsg[5] = 0x00;
- smimsg[6] = 0x00;
- smimsg[7] = 0x00;
-
- send_smi_frame (sp, bd, smimsg);
-
- if (speed == 100) {
- phypcrval = PHYPCR_SPEED; /* 100 MBIT, disable autoneg. */
- } else {
- phypcrval = 0; /* 10 MBIT, disable autoneg. */
- }
-
- /* send MSGs */
- for (pnr = 0; pnr < 8; pnr++) {
- smimsg[0] = 0x00; /* CHIP/HUB ID */
- smimsg[1] = 0x38; /* WRITE CMD */
- smimsg[2] = ((PHYPCR_ADDR + pnr) << 4) & 0xf0;
- smimsg[3] = (PHYPCR_ADDR + pnr) >> 4;
- smimsg[4] = (unsigned char) (phypcrval & 0xff);
- smimsg[5] = (unsigned char) (phypcrval >> 8);
- smimsg[6] = 0x00;
- smimsg[7] = 0x00;
-
- send_smi_frame (sp, bd, smimsg);
- }
-
- smimsg[0] = 0x00; /* CHIP/HUB ID */
- smimsg[1] = 0x38; /* WRITE CMD */
- smimsg[2] = (PHYGPCR_ADDR << 4) & 0xf0;
- smimsg[3] = PHYGPCR_ADDR >> 4;
- smimsg[4] = 0xff; /* enable port 1-8 */
- smimsg[5] = 0x01; /* enable MII1 (0x01) */
- smimsg[6] = 0x00;
- smimsg[7] = 0x00;
-
- send_smi_frame (sp, bd, smimsg);
-
- smimsg[0] = 0x00; /* CHIP/HUB ID */
- smimsg[1] = 0x38; /* WRITE CMD */
- smimsg[2] = (LEDPCR_ADDR << 4) & 0xf0;
- smimsg[3] = LEDPCR_ADDR >> 4;
- smimsg[4] = 0xaa; /* Port 1-8 Conf.bits = 10 (Hardware control) */
- smimsg[5] = 0xaa;
- smimsg[6] = 0x00;
- smimsg[7] = 0x00;
-
- send_smi_frame (sp, bd, smimsg);
-
- /*
- * Disable Transmitter (so that we can free the BD, too)
- */
- sp->scc_gsmrl &= ~SCC_GSMRL_ENT;
-}
-
-/* ------------------------------------------------------------------------- */
-
-static void send_smi_frame (volatile scc_t * sp, volatile cbd_t * bd,
- uchar * msg)
-{
-#ifdef DEBUG
- unsigned hub, chip, cmd, length, addr;
-
- hub = msg[0] & 0x1F;
- chip = msg[0] >> 5;
- cmd = msg[1] & 0x1F;
- length = (msg[1] >> 5) | ((msg[2] & 0x0F) << 3);
- addr = (msg[2] >> 4) | (msg[3] << 4);
-
- printf ("SMI send: Hub %02x Chip %x Cmd %02x Len %d Addr %03x: "
- "%02x %02x %02x %02x\n",
- hub, chip, cmd, length, addr, msg[4], msg[5], msg[6], msg[7]);
-#endif /* DEBUG */
-
- bd->cbd_bufaddr = (uint) msg;
- bd->cbd_datlen = SMI_MSGLEN;
- bd->cbd_sc |= BD_SC_READY;
-
- /* wait for msg transmitted */
- while ((sp->scc_scce & 0x0002) == 0);
- /* clear all events */
- sp->scc_scce = ~0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-void show_boot_progress (int status)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
- /* let things compatible */
- if (status < -BOOTSTAGE_ID_POST_FAIL_R)
- status = -1;
- status ^= 0x0F;
- status = (status & 0x0F) << 14;
- immr->im_cpm.cp_pbdat = (immr->im_cpm.cp_pbdat & ~PB_LED_ALL) | status;
-}
-
-/* ------------------------------------------------------------------------- */
diff --git a/board/hermes/u-boot.lds b/board/hermes/u-boot.lds
deleted file mode 100644
index 0309860..0000000
--- a/board/hermes/u-boot.lds
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * (C) Copyright 2000-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
- arch/powerpc/cpu/mpc8xx/start.o (.text*)
- arch/powerpc/cpu/mpc8xx/traps.o (.text*)
- board/hermes/built-in.o (.text*)
-
- . = env_offset;
- common/env_embedded.o (.text*)
-
- *(.text*)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x00FF) & 0xFFFFFF00;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- _GOT2_TABLE_ = .;
- KEEP(*(.got2))
- KEEP(*(.got))
- PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
- _FIXUP_TABLE_ = .;
- KEEP(*(.fixup))
- }
- __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data*)
- *(.sdata*)
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
-
- . = ALIGN(4);
- .u_boot_list : {
- KEEP(*(SORT(.u_boot_list*)));
- }
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(256);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(256);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.bss*)
- *(.sbss*)
- *(COMMON)
- . = ALIGN(4);
- }
- __bss_end = . ;
- PROVIDE (end = .);
-}
diff --git a/board/hermes/u-boot.lds.debug b/board/hermes/u-boot.lds.debug
deleted file mode 100644
index f34c07b..0000000
--- a/board/hermes/u-boot.lds.debug
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- arch/powerpc/lib/ppcstring.o (.text)
- arch/powerpc/cpu/mpc8xx/interrupts.o (.text)
- arch/powerpc/lib/time.o (.text)
- arch/powerpc/lib/ticks.o (.text)
- . = env_offset;
- common/env_embedded.o(.text)
-
- *(.text)
- *(.got1)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.rodata)
- *(.rodata1)
- *(.rodata.str1.4)
- *(.eh_frame)
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
-
- . = ALIGN(4);
- .u_boot_list : {
- KEEP(*(SORT(.u_boot_list*)));
- }
-
-
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- }
- __bss_end = . ;
- PROVIDE (end = .);
-}
diff --git a/board/isee/igep00x0/igep00x0.c b/board/isee/igep00x0/igep00x0.c
index 7b87cc2..47522f8 100644
--- a/board/isee/igep00x0/igep00x0.c
+++ b/board/isee/igep00x0/igep00x0.c
@@ -150,6 +150,13 @@ int board_mmc_init(bd_t *bis)
}
#endif
+#if defined(CONFIG_GENERIC_MMC)
+void board_mmc_power_init(void)
+{
+ twl4030_power_mmc_init(0);
+}
+#endif
+
void set_fdt(void)
{
switch (gd->bd->bi_arch_number) {
diff --git a/board/keymile/km82xx/km82xx.c b/board/keymile/km82xx/km82xx.c
index e200935..bf84676 100644
--- a/board/keymile/km82xx/km82xx.c
+++ b/board/keymile/km82xx/km82xx.c
@@ -300,11 +300,9 @@ phys_size_t initdram(int board_type)
out_8(&memctl->memc_psrt, CONFIG_SYS_PSRT);
out_be16(&memctl->memc_mptpr, CONFIG_SYS_MPTPR);
-#ifndef CONFIG_SYS_RAMBOOT
/* 60x SDRAM setup:
*/
psize = probe_sdram(memctl);
-#endif /* CONFIG_SYS_RAMBOOT */
icache_enable();
diff --git a/board/logicpd/omap3som/omap3logic.c b/board/logicpd/omap3som/omap3logic.c
index 1fd9f2c..609edf1 100644
--- a/board/logicpd/omap3som/omap3logic.c
+++ b/board/logicpd/omap3som/omap3logic.c
@@ -128,6 +128,13 @@ int board_mmc_init(bd_t *bis)
}
#endif
+#if defined(CONFIG_GENERIC_MMC)
+void board_mmc_power_init(void)
+{
+ twl4030_power_mmc_init(0);
+}
+#endif
+
#ifdef CONFIG_SMC911X
/* GPMC CS1 settings for Logic SOM LV/Torpedo LAN92xx Ethernet chip */
static const u32 gpmc_lan92xx_config[] = {
diff --git a/board/logicpd/zoom1/zoom1.c b/board/logicpd/zoom1/zoom1.c
index 9ef0026..d39203a 100644
--- a/board/logicpd/zoom1/zoom1.c
+++ b/board/logicpd/zoom1/zoom1.c
@@ -109,6 +109,11 @@ int board_mmc_init(bd_t *bis)
{
return omap_mmc_init(0, 0, 0, -1, -1);
}
+
+void board_mmc_power_init(void)
+{
+ twl4030_power_mmc_init(0);
+}
#endif
#ifdef CONFIG_CMD_NET
diff --git a/board/matrix_vision/mvblx/mvblx.c b/board/matrix_vision/mvblx/mvblx.c
index a69359f..c9d615b 100644
--- a/board/matrix_vision/mvblx/mvblx.c
+++ b/board/matrix_vision/mvblx/mvblx.c
@@ -94,6 +94,12 @@ int board_mmc_init(bd_t *bis)
omap_mmc_init(1, 0, 0, -1, -1);
return 0;
}
+
+void board_mmc_power_init(void)
+{
+ twl4030_power_mmc_init(0);
+ twl4030_power_mmc_init(1);
+}
#endif
#if defined(CONFIG_CMD_NET)
diff --git a/board/muas3001/muas3001.c b/board/muas3001/muas3001.c
index 529a58c..e0c4dba 100644
--- a/board/muas3001/muas3001.c
+++ b/board/muas3001/muas3001.c
@@ -243,14 +243,11 @@ phys_size_t initdram (int board_type)
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8260_t *memctl = &immap->im_memctl;
long psize;
-#ifndef CONFIG_SYS_RAMBOOT
long sizelittle, sizebig;
-#endif
memctl->memc_psrt = CONFIG_SYS_PSRT;
memctl->memc_mptpr = CONFIG_SYS_MPTPR;
-#ifndef CONFIG_SYS_RAMBOOT
/* 60x SDRAM setup:
*/
sizelittle = try_init (memctl, CONFIG_SYS_PSDMR_LITTLE, CONFIG_SYS_OR1_LITTLE,
@@ -263,7 +260,6 @@ phys_size_t initdram (int board_type)
psize = try_init (memctl, CONFIG_SYS_PSDMR_LITTLE, CONFIG_SYS_OR1_LITTLE,
(uchar *) CONFIG_SYS_SDRAM_BASE);
}
-#endif /* CONFIG_SYS_RAMBOOT */
icache_enable ();
diff --git a/board/nokia/rx51/rx51.c b/board/nokia/rx51/rx51.c
index c2e07db..b6b8ad6 100644
--- a/board/nokia/rx51/rx51.c
+++ b/board/nokia/rx51/rx51.c
@@ -659,3 +659,9 @@ int board_mmc_init(bd_t *bis)
omap_mmc_init(1, 0, 0, -1, -1);
return 0;
}
+
+void board_mmc_power_init(void)
+{
+ twl4030_power_mmc_init(0);
+ twl4030_power_mmc_init(1);
+}
diff --git a/board/nvidia/cardhu/cardhu.c b/board/nvidia/cardhu/cardhu.c
index cc0e5e1..026f45c 100644
--- a/board/nvidia/cardhu/cardhu.c
+++ b/board/nvidia/cardhu/cardhu.c
@@ -6,6 +6,7 @@
*/
#include <common.h>
+#include <dm.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/gp_padctrl.h>
#include "pinmux-config-cardhu.h"
@@ -37,17 +38,23 @@ void pinmux_init(void)
*/
void board_sdmmc_voltage_init(void)
{
+ struct udevice *dev;
uchar reg, data_buffer[1];
+ int ret;
int i;
- i2c_set_bus_num(0); /* PMU is on bus 0 */
+ ret = i2c_get_chip_for_busnum(0, PMU_I2C_ADDRESS, &dev);
+ if (ret) {
+ debug("%s: Cannot find PMIC I2C chip\n", __func__);
+ return;
+ }
/* TPS659110: LDO5_REG = 3.3v, ACTIVE to SDMMC1 */
data_buffer[0] = 0x65;
reg = 0x32;
for (i = 0; i < MAX_I2C_RETRY; ++i) {
- if (i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1))
+ if (i2c_write(dev, reg, data_buffer, 1))
udelay(100);
}
@@ -56,7 +63,7 @@ void board_sdmmc_voltage_init(void)
reg = 0x67;
for (i = 0; i < MAX_I2C_RETRY; ++i) {
- if (i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1))
+ if (i2c_write(dev, reg, data_buffer, 1))
udelay(100);
}
}
diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c
index 0e4a65a..4bdbf01 100644
--- a/board/nvidia/common/board.c
+++ b/board/nvidia/common/board.c
@@ -113,10 +113,6 @@ int board_init(void)
power_det_init();
#ifdef CONFIG_SYS_I2C_TEGRA
-#ifndef CONFIG_SYS_I2C_INIT_BOARD
-#error "You must define CONFIG_SYS_I2C_INIT_BOARD to use i2c on Nvidia boards"
-#endif
- i2c_init_board();
# ifdef CONFIG_TEGRA_PMU
if (pmu_set_nominal())
debug("Failed to select nominal voltages\n");
diff --git a/board/nvidia/dalmore/dalmore.c b/board/nvidia/dalmore/dalmore.c
index f2d05af..2a73746 100644
--- a/board/nvidia/dalmore/dalmore.c
+++ b/board/nvidia/dalmore/dalmore.c
@@ -15,6 +15,7 @@
*/
#include <common.h>
+#include <dm.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/gp_padctrl.h>
#include "pinmux-config-dalmore.h"
@@ -50,18 +51,21 @@ void pinmux_init(void)
*/
void board_sdmmc_voltage_init(void)
{
+ struct udevice *dev;
uchar reg, data_buffer[1];
int ret;
- ret = i2c_set_bus_num(0);/* PMU is on bus 0 */
- if (ret)
- printf("%s: i2c_set_bus_num returned %d\n", __func__, ret);
+ ret = i2c_get_chip_for_busnum(0, PMU_I2C_ADDRESS, &dev);
+ if (ret) {
+ debug("%s: Cannot find PMIC I2C chip\n", __func__);
+ return;
+ }
/* TPS65913: LDO9_VOLTAGE = 3.3V */
data_buffer[0] = 0x31;
reg = 0x61;
- ret = i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1);
+ ret = i2c_write(dev, reg, data_buffer, 1);
if (ret)
printf("%s: PMU i2c_write %02X<-%02X returned %d\n",
__func__, reg, data_buffer[0], ret);
@@ -70,7 +74,7 @@ void board_sdmmc_voltage_init(void)
data_buffer[0] = 0x01;
reg = 0x60;
- ret = i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1);
+ ret = i2c_write(dev, reg, data_buffer, 1);
if (ret)
printf("%s: PMU i2c_write %02X<-%02X returned %d\n",
__func__, reg, data_buffer[0], ret);
@@ -79,7 +83,12 @@ void board_sdmmc_voltage_init(void)
data_buffer[0] = 0x03;
reg = 0x14;
- ret = i2c_write(BAT_I2C_ADDRESS, reg, 1, data_buffer, 1);
+ ret = i2c_get_chip_for_busnum(0, BAT_I2C_ADDRESS, &dev);
+ if (ret) {
+ debug("%s: Cannot find charger I2C chip\n", __func__);
+ return;
+ }
+ ret = i2c_write(dev, reg, data_buffer, 1);
if (ret)
printf("%s: BAT i2c_write %02X<-%02X returned %d\n",
__func__, reg, data_buffer[0], ret);
diff --git a/board/nvidia/nyan-big/Kconfig b/board/nvidia/nyan-big/Kconfig
new file mode 100644
index 0000000..6c42bb9
--- /dev/null
+++ b/board/nvidia/nyan-big/Kconfig
@@ -0,0 +1,24 @@
+if TARGET_NYAN_BIG
+
+config SYS_CPU
+ string
+ default "arm720t" if SPL_BUILD
+ default "armv7" if !SPL_BUILD
+
+config SYS_BOARD
+ string
+ default "nyan-big"
+
+config SYS_VENDOR
+ string
+ default "nvidia"
+
+config SYS_SOC
+ string
+ default "tegra124"
+
+config SYS_CONFIG_NAME
+ string
+ default "nyan-big"
+
+endif
diff --git a/board/nvidia/nyan-big/MAINTAINERS b/board/nvidia/nyan-big/MAINTAINERS
new file mode 100644
index 0000000..ff74627
--- /dev/null
+++ b/board/nvidia/nyan-big/MAINTAINERS
@@ -0,0 +1,6 @@
+NORRIN BOARD
+M: Allen Martin <amartin@nvidia.com>
+S: Maintained
+F: board/nvidia/nyan-big/
+F: include/configs/nyan-big.h
+F: configs/nyan-big_defconfig
diff --git a/board/nvidia/nyan-big/Makefile b/board/nvidia/nyan-big/Makefile
new file mode 100644
index 0000000..cd2f61d
--- /dev/null
+++ b/board/nvidia/nyan-big/Makefile
@@ -0,0 +1,9 @@
+#
+# (C) Copyright 2014
+# NVIDIA Corporation <www.nvidia.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += ../venice2/as3722_init.o
+obj-y += nyan-big.o
diff --git a/board/nvidia/nyan-big/nyan-big.c b/board/nvidia/nyan-big/nyan-big.c
new file mode 100644
index 0000000..d4d2496
--- /dev/null
+++ b/board/nvidia/nyan-big/nyan-big.c
@@ -0,0 +1,27 @@
+/*
+ * (C) Copyright 2014
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/pinmux.h>
+#include "pinmux-config-nyan-big.h"
+
+/*
+ * Routine: pinmux_init
+ * Description: Do individual peripheral pinmux configs
+ */
+void pinmux_init(void)
+{
+ gpio_config_table(nyan_big_gpio_inits,
+ ARRAY_SIZE(nyan_big_gpio_inits));
+
+ pinmux_config_pingrp_table(nyan_big_pingrps,
+ ARRAY_SIZE(nyan_big_pingrps));
+
+ pinmux_config_drvgrp_table(nyan_big_drvgrps,
+ ARRAY_SIZE(nyan_big_drvgrps));
+}
diff --git a/board/nvidia/nyan-big/pinmux-config-nyan-big.h b/board/nvidia/nyan-big/pinmux-config-nyan-big.h
new file mode 100644
index 0000000..9c5fbaa
--- /dev/null
+++ b/board/nvidia/nyan-big/pinmux-config-nyan-big.h
@@ -0,0 +1,287 @@
+/*
+ * Copyright (c) 2014, NVIDIA CORPORATION. All rights reserved.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _PINMUX_CONFIG_NYAN_BIG_H_
+#define _PINMUX_CONFIG_NYAN_BIG_H_
+
+#define GPIO_INIT(_gpio, _init) \
+ { \
+ .gpio = GPIO_P##_gpio, \
+ .init = TEGRA_GPIO_INIT_##_init, \
+ }
+
+static const struct tegra_gpio_config nyan_big_gpio_inits[] = {
+ /* gpio, init_val */
+ GPIO_INIT(A0, IN),
+ GPIO_INIT(C7, IN),
+ GPIO_INIT(G0, IN),
+ GPIO_INIT(G1, IN),
+ GPIO_INIT(G2, IN),
+ GPIO_INIT(G3, IN),
+ GPIO_INIT(H2, IN),
+ GPIO_INIT(H4, IN),
+ GPIO_INIT(H6, IN),
+ GPIO_INIT(H7, OUT1),
+ GPIO_INIT(I0, IN),
+ GPIO_INIT(I1, IN),
+ GPIO_INIT(I5, OUT1),
+ GPIO_INIT(I6, IN),
+ GPIO_INIT(I7, IN),
+ GPIO_INIT(J0, IN),
+ GPIO_INIT(J7, IN),
+ GPIO_INIT(K1, OUT0),
+ GPIO_INIT(K2, IN),
+ GPIO_INIT(K4, OUT0),
+ GPIO_INIT(K6, OUT0),
+ GPIO_INIT(K7, IN),
+ GPIO_INIT(N7, IN),
+ GPIO_INIT(P2, OUT0),
+ GPIO_INIT(Q0, IN),
+ GPIO_INIT(Q2, IN),
+ GPIO_INIT(Q3, IN),
+ GPIO_INIT(Q6, IN),
+ GPIO_INIT(Q7, IN),
+ GPIO_INIT(R0, OUT0),
+ GPIO_INIT(R1, IN),
+ GPIO_INIT(R4, IN),
+ GPIO_INIT(R7, IN),
+ GPIO_INIT(S3, OUT0),
+ GPIO_INIT(S4, OUT0),
+ GPIO_INIT(S7, IN),
+ GPIO_INIT(T1, IN),
+ GPIO_INIT(U4, IN),
+ GPIO_INIT(U5, IN),
+ GPIO_INIT(U6, IN),
+ GPIO_INIT(V0, IN),
+ GPIO_INIT(W3, IN),
+ GPIO_INIT(X1, IN),
+ GPIO_INIT(X4, IN),
+ GPIO_INIT(X7, OUT0),
+};
+
+#define PINCFG(_pingrp, _mux, _pull, _tri, _io, _od, _rcv_sel) \
+ { \
+ .pingrp = PMUX_PINGRP_##_pingrp, \
+ .func = PMUX_FUNC_##_mux, \
+ .pull = PMUX_PULL_##_pull, \
+ .tristate = PMUX_TRI_##_tri, \
+ .io = PMUX_PIN_##_io, \
+ .od = PMUX_PIN_OD_##_od, \
+ .rcv_sel = PMUX_PIN_RCV_SEL_##_rcv_sel, \
+ .lock = PMUX_PIN_LOCK_DEFAULT, \
+ .ioreset = PMUX_PIN_IO_RESET_DEFAULT, \
+ }
+
+static const struct pmux_pingrp_config nyan_big_pingrps[] = {
+ /* pingrp, mux, pull, tri, e_input, od, rcv_sel */
+ PINCFG(CLK_32K_OUT_PA0, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(UART3_CTS_N_PA1, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP2_FS_PA2, I2S1, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP2_SCLK_PA3, I2S1, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP2_DIN_PA4, I2S1, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP2_DOUT_PA5, I2S1, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC3_CLK_PA6, SDMMC3, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC3_CMD_PA7, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PB0, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PB1, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC3_DAT3_PB4, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC3_DAT2_PB5, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC3_DAT1_PB6, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC3_DAT0_PB7, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(UART3_RTS_N_PC0, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(UART2_TXD_PC2, IRDA, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(UART2_RXD_PC3, IRDA, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(GEN1_I2C_SCL_PC4, I2C1, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT),
+ PINCFG(GEN1_I2C_SDA_PC5, I2C1, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT),
+ PINCFG(PC7, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PG0, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PG1, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PG2, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PG3, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PG4, SPI4, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PG5, SPI4, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PG6, SPI4, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PG7, SPI4, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PH0, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PH1, PWM1, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PH2, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PH3, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PH4, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PH5, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PH6, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PH7, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PI0, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PI1, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PI2, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PI3, SPI4, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PI4, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PI5, DEFAULT, UP, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PI6, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PI7, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PJ0, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PJ2, RSVD1, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(UART2_CTS_N_PJ5, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(UART2_RTS_N_PJ6, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PJ7, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PK0, RSVD1, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PK1, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PK2, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PK3, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PK4, DEFAULT, UP, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(SPDIF_OUT_PK5, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(SPDIF_IN_PK6, DEFAULT, DOWN, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PK7, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP1_FS_PN0, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP1_DIN_PN1, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP1_DOUT_PN2, I2S0, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP1_SCLK_PN3, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(USB_VBUS_EN0_PN4, USB, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT),
+ PINCFG(USB_VBUS_EN1_PN5, USB, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT),
+ PINCFG(HDMI_INT_PN7, DEFAULT, DOWN, NORMAL, INPUT, DEFAULT, NORMAL),
+ PINCFG(ULPI_DATA7_PO0, ULPI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(ULPI_DATA0_PO1, ULPI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(ULPI_DATA1_PO2, ULPI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(ULPI_DATA2_PO3, ULPI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(ULPI_DATA3_PO4, ULPI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(ULPI_DATA4_PO5, ULPI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(ULPI_DATA5_PO6, ULPI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(ULPI_DATA6_PO7, ULPI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP3_FS_PP0, I2S2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP3_DIN_PP1, I2S2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP3_DOUT_PP2, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP3_SCLK_PP3, RSVD3, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP4_FS_PP4, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP4_DIN_PP5, RSVD3, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP4_DOUT_PP6, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP4_SCLK_PP7, RSVD3, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_COL0_PQ0, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_COL1_PQ1, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_COL2_PQ2, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_COL3_PQ3, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_COL4_PQ4, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_COL5_PQ5, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_COL6_PQ6, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_COL7_PQ7, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW0_PR0, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW1_PR1, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW2_PR2, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW3_PR3, KBC, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW4_PR4, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW5_PR5, RSVD3, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW6_PR6, KBC, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW7_PR7, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW8_PS0, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW9_PS1, UARTA, DOWN, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW10_PS2, UARTA, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW11_PS3, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW12_PS4, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW13_PS5, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW14_PS6, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW15_PS7, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW16_PT0, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(KB_ROW17_PT1, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(GEN2_I2C_SCL_PT5, I2C2, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT),
+ PINCFG(GEN2_I2C_SDA_PT6, I2C2, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT),
+ PINCFG(SDMMC4_CMD_PT7, SDMMC4, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PU0, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PU1, RSVD1, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PU2, RSVD1, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PU3, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PU4, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PU5, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PU6, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PV0, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PV1, RSVD1, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC3_CD_N_PV2, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC1_WP_N_PV3, SDMMC1, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(DDC_SCL_PV4, I2C4, NORMAL, NORMAL, INPUT, DEFAULT, NORMAL),
+ PINCFG(DDC_SDA_PV5, I2C4, NORMAL, NORMAL, INPUT, DEFAULT, NORMAL),
+ PINCFG(GPIO_W2_AUD_PW2, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(GPIO_W3_AUD_PW3, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP_MCLK1_PW4, EXTPERIPH1, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(CLK2_OUT_PW5, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(UART3_TXD_PW6, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(UART3_RXD_PW7, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(DVFS_PWM_PX0, CLDVFS, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(GPIO_X1_AUD_PX1, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(DVFS_CLK_PX2, CLDVFS, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(GPIO_X3_AUD_PX3, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(GPIO_X4_AUD_PX4, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(GPIO_X5_AUD_PX5, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(GPIO_X6_AUD_PX6, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(GPIO_X7_AUD_PX7, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(ULPI_CLK_PY0, SPI1, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(ULPI_DIR_PY1, SPI1, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(ULPI_NXT_PY2, SPI1, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(ULPI_STP_PY3, SPI1, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC1_DAT3_PY4, SDMMC1, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC1_DAT2_PY5, SDMMC1, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC1_DAT1_PY6, SDMMC1, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC1_DAT0_PY7, SDMMC1, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC1_CLK_PZ0, SDMMC1, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC1_CMD_PZ1, SDMMC1, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PWR_I2C_SCL_PZ6, I2CPWR, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT),
+ PINCFG(PWR_I2C_SDA_PZ7, I2CPWR, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT),
+ PINCFG(SDMMC4_DAT0_PAA0, SDMMC4, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC4_DAT1_PAA1, SDMMC4, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC4_DAT2_PAA2, SDMMC4, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC4_DAT3_PAA3, SDMMC4, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC4_DAT4_PAA4, SDMMC4, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC4_DAT5_PAA5, SDMMC4, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC4_DAT6_PAA6, SDMMC4, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC4_DAT7_PAA7, SDMMC4, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(PBB0, VGP6, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(CAM_I2C_SCL_PBB1, RSVD3, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(CAM_I2C_SDA_PBB2, RSVD3, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(PBB3, VGP3, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PBB4, VGP4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PBB5, RSVD3, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PBB6, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PBB7, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(CAM_MCLK_PCC0, VI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PCC1, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PCC2, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC4_CLK_PCC4, SDMMC4, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(CLK2_REQ_PCC5, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PEX_L0_RST_N_PDD1, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PEX_L0_CLKREQ_N_PDD2, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PEX_WAKE_N_PDD3, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PEX_L1_RST_N_PDD5, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PEX_L1_CLKREQ_N_PDD6, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(CLK3_OUT_PEE0, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(CLK3_REQ_PEE1, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(DAP_MCLK1_REQ_PEE2, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(HDMI_CEC_PEE3, CEC, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT),
+ PINCFG(SDMMC3_CLK_LB_OUT_PEE4, SDMMC3, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(SDMMC3_CLK_LB_IN_PEE5, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(DP_HPD_PFF0, DP, UP, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(USB_VBUS_EN2_PFF1, RSVD2, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(PFF2, RSVD2, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT),
+ PINCFG(CORE_PWR_REQ, PWRON, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(CPU_PWR_REQ, CPU, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(PWR_INT_N, PMI, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(RESET_OUT_N, RESET_OUT_N, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+ PINCFG(OWR, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, NORMAL),
+ PINCFG(CLK_32K_IN, CLK, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT),
+ PINCFG(JTAG_RTCK, RTCK, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT),
+};
+
+#define DRVCFG(_drvgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) \
+ { \
+ .drvgrp = PMUX_DRVGRP_##_drvgrp, \
+ .slwf = _slwf, \
+ .slwr = _slwr, \
+ .drvup = _drvup, \
+ .drvdn = _drvdn, \
+ .lpmd = PMUX_LPMD_##_lpmd, \
+ .schmt = PMUX_SCHMT_##_schmt, \
+ .hsm = PMUX_HSM_##_hsm, \
+ }
+
+static const struct pmux_drvgrp_config nyan_big_drvgrps[] = {
+};
+
+#endif /* PINMUX_CONFIG_NYAN_BIG_H */
diff --git a/board/nvidia/venice2/as3722_init.h b/board/nvidia/venice2/as3722_init.h
index 06c366e..992b11f 100644
--- a/board/nvidia/venice2/as3722_init.h
+++ b/board/nvidia/venice2/as3722_init.h
@@ -18,7 +18,7 @@
#define AS3722_LDO6VOLTAGE_REG 0x16 /* VDD_SDMMC */
#define AS3722_LDCONTROL_REG 0x4E
-#ifdef CONFIG_TARGET_JETSON_TK1
+#if defined(CONFIG_TARGET_JETSON_TK1) || defined(CONFIG_TARGET_NYAN_BIG)
#define AS3722_SD0VOLTAGE_DATA (0x3C00 | AS3722_SD0VOLTAGE_REG)
#else
#define AS3722_SD0VOLTAGE_DATA (0x2800 | AS3722_SD0VOLTAGE_REG)
diff --git a/board/nvidia/whistler/whistler.c b/board/nvidia/whistler/whistler.c
index 3e9d3d9..3114b20 100644
--- a/board/nvidia/whistler/whistler.c
+++ b/board/nvidia/whistler/whistler.c
@@ -6,6 +6,7 @@
*/
#include <common.h>
+#include <dm.h>
#include <asm/io.h>
#include <asm/arch/tegra.h>
#include <asm/arch/clock.h>
@@ -21,23 +22,26 @@
*/
void pin_mux_mmc(void)
{
+ struct udevice *dev;
uchar val;
int ret;
/* Turn on MAX8907B LDO12 to 2.8V for J40 power */
- ret = i2c_set_bus_num(0);
- if (ret)
- printf("i2c_set_bus_num failed: %d\n", ret);
+ ret = i2c_get_chip_for_busnum(0, 0x3c, &dev);
+ if (ret) {
+ printf("%s: Cannot find MAX8907B I2C chip\n", __func__);
+ return;
+ }
val = 0x29;
- ret = i2c_write(0x3c, 0x46, 1, &val, 1);
+ ret = i2c_write(dev, 0x46, &val, 1);
if (ret)
printf("i2c_write 0 0x3c 0x46 failed: %d\n", ret);
val = 0x00;
- ret = i2c_write(0x3c, 0x45, 1, &val, 1);
+ ret = i2c_write(dev, 0x45, &val, 1);
if (ret)
printf("i2c_write 0 0x3c 0x45 failed: %d\n", ret);
val = 0x1f;
- ret = i2c_write(0x3c, 0x44, 1, &val, 1);
+ ret = i2c_write(dev, 0x44, &val, 1);
if (ret)
printf("i2c_write 0 0x3c 0x44 failed: %d\n", ret);
@@ -49,6 +53,7 @@ void pin_mux_mmc(void)
/* this is a weak define that we are overriding */
void pin_mux_usb(void)
{
+ struct udevice *dev;
uchar val;
int ret;
@@ -59,15 +64,17 @@ void pin_mux_usb(void)
*/
/* Turn on TAC6416's GPIO 0+1 for USB1/3's VBUS */
- ret = i2c_set_bus_num(0);
- if (ret)
- printf("i2c_set_bus_num failed: %d\n", ret);
+ ret = i2c_get_chip_for_busnum(0, 0x20, &dev);
+ if (ret) {
+ printf("%s: Cannot find TAC6416 I2C chip\n", __func__);
+ return;
+ }
val = 0x03;
- ret = i2c_write(0x20, 2, 1, &val, 1);
+ ret = i2c_write(dev, 2, &val, 1);
if (ret)
printf("i2c_write 0 0x20 2 failed: %d\n", ret);
val = 0xfc;
- ret = i2c_write(0x20, 6, 1, &val, 1);
+ ret = i2c_write(dev, 6, &val, 1);
if (ret)
printf("i2c_write 0 0x20 6 failed: %d\n", ret);
}
diff --git a/board/overo/overo.c b/board/overo/overo.c
index dfb8602..b7f85e7 100644
--- a/board/overo/overo.c
+++ b/board/overo/overo.c
@@ -493,6 +493,13 @@ int board_mmc_init(bd_t *bis)
}
#endif
+#if defined(CONFIG_GENERIC_MMC)
+void board_mmc_power_init(void)
+{
+ twl4030_power_mmc_init(0);
+}
+#endif
+
#if defined(CONFIG_USB_EHCI) && !defined(CONFIG_SPL_BUILD)
static struct omap_usbhs_board_data usbhs_bdata = {
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
diff --git a/board/pandora/pandora.c b/board/pandora/pandora.c
index 146dcea..59b5a7e 100644
--- a/board/pandora/pandora.c
+++ b/board/pandora/pandora.c
@@ -126,4 +126,9 @@ int board_mmc_init(bd_t *bis)
{
return omap_mmc_init(0, 0, 0, -1, -1);
}
+
+void board_mmc_power_init(void)
+{
+ twl4030_power_mmc_init(0);
+}
#endif
diff --git a/board/raspberrypi/rpi_b/Kconfig b/board/raspberrypi/rpi/Kconfig
index 501d511..6a538cf 100644
--- a/board/raspberrypi/rpi_b/Kconfig
+++ b/board/raspberrypi/rpi/Kconfig
@@ -1,7 +1,7 @@
-if TARGET_RPI_B
+if TARGET_RPI
config SYS_BOARD
- default "rpi_b"
+ default "rpi"
config SYS_VENDOR
default "raspberrypi"
@@ -10,6 +10,6 @@ config SYS_SOC
default "bcm2835"
config SYS_CONFIG_NAME
- default "rpi_b"
+ default "rpi"
endif
diff --git a/board/raspberrypi/rpi/MAINTAINERS b/board/raspberrypi/rpi/MAINTAINERS
new file mode 100644
index 0000000..6dcb7bd
--- /dev/null
+++ b/board/raspberrypi/rpi/MAINTAINERS
@@ -0,0 +1,6 @@
+RPI BOARD
+M: Stephen Warren <swarren@wwwdotorg.org>
+S: Maintained
+F: board/raspberrypi/rpi/
+F: include/configs/rpi.h
+F: configs/rpi_defconfig
diff --git a/board/raspberrypi/rpi_b/Makefile b/board/raspberrypi/rpi/Makefile
index 7e9bfbf..c53c92b 100644
--- a/board/raspberrypi/rpi_b/Makefile
+++ b/board/raspberrypi/rpi/Makefile
@@ -12,4 +12,4 @@
# GNU General Public License for more details.
#
-obj-y := rpi_b.o
+obj-y := rpi.o
diff --git a/board/raspberrypi/rpi_b/rpi_b.c b/board/raspberrypi/rpi/rpi.c
index db904a4..7dbd40e 100644
--- a/board/raspberrypi/rpi_b/rpi_b.c
+++ b/board/raspberrypi/rpi/rpi.c
@@ -24,6 +24,7 @@
#include <asm/arch/mbox.h>
#include <asm/arch/sdhci.h>
#include <asm/global_data.h>
+#include <dm/platform_data/serial_pl01x.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -36,12 +37,29 @@ U_BOOT_DEVICE(bcm2835_gpios) = {
.platdata = &gpio_platdata,
};
+static const struct pl01x_serial_platdata serial_platdata = {
+ .base = 0x20201000,
+ .type = TYPE_PL011,
+ .clock = 3000000,
+};
+
+U_BOOT_DEVICE(bcm2835_serials) = {
+ .name = "serial_pl01x",
+ .platdata = &serial_platdata,
+};
+
struct msg_get_arm_mem {
struct bcm2835_mbox_hdr hdr;
struct bcm2835_mbox_tag_get_arm_mem get_arm_mem;
u32 end_tag;
};
+struct msg_get_board_rev {
+ struct bcm2835_mbox_hdr hdr;
+ struct bcm2835_mbox_tag_get_board_rev get_board_rev;
+ u32 end_tag;
+};
+
struct msg_get_mac_address {
struct bcm2835_mbox_hdr hdr;
struct bcm2835_mbox_tag_get_mac_address get_mac_address;
@@ -60,6 +78,67 @@ struct msg_get_clock_rate {
u32 end_tag;
};
+/* See comments in mbox.h for data source */
+static const struct {
+ const char *name;
+ const char *fdtfile;
+} models[] = {
+ [BCM2835_BOARD_REV_B_I2C0_2] = {
+ "Model B (no P5)",
+ "bcm2835-rpi-b-i2c0.dtb",
+ },
+ [BCM2835_BOARD_REV_B_I2C0_3] = {
+ "Model B (no P5)",
+ "bcm2835-rpi-b-i2c0.dtb",
+ },
+ [BCM2835_BOARD_REV_B_I2C1_4] = {
+ "Model B",
+ "bcm2835-rpi-b.dtb",
+ },
+ [BCM2835_BOARD_REV_B_I2C1_5] = {
+ "Model B",
+ "bcm2835-rpi-b.dtb",
+ },
+ [BCM2835_BOARD_REV_B_I2C1_6] = {
+ "Model B",
+ "bcm2835-rpi-b.dtb",
+ },
+ [BCM2835_BOARD_REV_A_7] = {
+ "Model A",
+ "bcm2835-rpi-a.dtb",
+ },
+ [BCM2835_BOARD_REV_A_8] = {
+ "Model A",
+ "bcm2835-rpi-a.dtb",
+ },
+ [BCM2835_BOARD_REV_A_9] = {
+ "Model A",
+ "bcm2835-rpi-a.dtb",
+ },
+ [BCM2835_BOARD_REV_B_REV2_d] = {
+ "Model B rev2",
+ "bcm2835-rpi-b-rev2.dtb",
+ },
+ [BCM2835_BOARD_REV_B_REV2_e] = {
+ "Model B rev2",
+ "bcm2835-rpi-b-rev2.dtb",
+ },
+ [BCM2835_BOARD_REV_B_REV2_f] = {
+ "Model B rev2",
+ "bcm2835-rpi-b-rev2.dtb",
+ },
+ [BCM2835_BOARD_REV_B_PLUS] = {
+ "Model B+",
+ "bcm2835-rpi-b-plus.dtb",
+ },
+ [BCM2835_BOARD_REV_CM] = {
+ "Compute Module",
+ "bcm2835-rpi-cm.dtb",
+ },
+};
+
+u32 rpi_board_rev = 0;
+
int dram_init(void)
{
ALLOC_ALIGN_BUFFER(struct msg_get_arm_mem, msg, 1, 16);
@@ -79,13 +158,27 @@ int dram_init(void)
return 0;
}
-int misc_init_r(void)
+static void set_fdtfile(void)
+{
+ const char *fdtfile;
+
+ if (getenv("fdtfile"))
+ return;
+
+ fdtfile = models[rpi_board_rev].fdtfile;
+ if (!fdtfile)
+ fdtfile = "bcm2835-rpi-other.dtb";
+
+ setenv("fdtfile", fdtfile);
+}
+
+static void set_usbethaddr(void)
{
ALLOC_ALIGN_BUFFER(struct msg_get_mac_address, msg, 1, 16);
int ret;
if (getenv("usbethaddr"))
- return 0;
+ return;
BCM2835_MBOX_INIT_HDR(msg);
BCM2835_MBOX_INIT_TAG(&msg->get_mac_address, GET_MAC_ADDRESS);
@@ -94,11 +187,18 @@ int misc_init_r(void)
if (ret) {
printf("bcm2835: Could not query MAC address\n");
/* Ignore error; not critical */
- return 0;
+ return;
}
eth_setenv_enetaddr("usbethaddr", msg->get_mac_address.body.resp.mac);
+ return;
+}
+
+int misc_init_r(void)
+{
+ set_fdtfile();
+ set_usbethaddr();
return 0;
}
@@ -126,8 +226,36 @@ static int power_on_module(u32 module)
return 0;
}
+static void get_board_rev(void)
+{
+ ALLOC_ALIGN_BUFFER(struct msg_get_board_rev, msg, 1, 16);
+ int ret;
+ const char *name;
+
+ BCM2835_MBOX_INIT_HDR(msg);
+ BCM2835_MBOX_INIT_TAG(&msg->get_board_rev, GET_BOARD_REV);
+
+ ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg->hdr);
+ if (ret) {
+ printf("bcm2835: Could not query board revision\n");
+ /* Ignore error; not critical */
+ return;
+ }
+
+ rpi_board_rev = msg->get_board_rev.body.resp.rev;
+ if (rpi_board_rev >= ARRAY_SIZE(models))
+ rpi_board_rev = 0;
+
+ name = models[rpi_board_rev].name;
+ if (!name)
+ name = "Unknown model";
+ printf("RPI model: %s\n", name);
+}
+
int board_init(void)
{
+ get_board_rev();
+
gd->bd->bi_boot_params = 0x100;
return power_on_module(BCM2835_MBOX_POWER_DEVID_USB_HCD);
diff --git a/board/raspberrypi/rpi_b/MAINTAINERS b/board/raspberrypi/rpi_b/MAINTAINERS
deleted file mode 100644
index 14f3948..0000000
--- a/board/raspberrypi/rpi_b/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-RPI_B BOARD
-M: Stephen Warren <swarren@wwwdotorg.org>
-S: Maintained
-F: board/raspberrypi/rpi_b/
-F: include/configs/rpi_b.h
-F: configs/rpi_b_defconfig
diff --git a/board/renesas/alt/Makefile b/board/renesas/alt/Makefile
index 9ed12bd..6904e39 100644
--- a/board/renesas/alt/Makefile
+++ b/board/renesas/alt/Makefile
@@ -6,4 +6,4 @@
# SPDX-License-Identifier: GPL-2.0
#
-obj-y := alt.o qos.o
+obj-y := alt.o qos.o ../rcar-gen2-common/common.o
diff --git a/board/renesas/alt/alt.c b/board/renesas/alt/alt.c
index 523c5f1..8cc17e9 100644
--- a/board/renesas/alt/alt.c
+++ b/board/renesas/alt/alt.c
@@ -15,6 +15,8 @@
#include <asm/arch/sys_proto.h>
#include <asm/gpio.h>
#include <asm/arch/rmobile.h>
+#include <asm/arch/rcar-mstp.h>
+#include <asm/arch/mmc.h>
#include <netdev.h>
#include <miiphy.h>
#include <i2c.h>
@@ -37,30 +39,11 @@ void s_init(void)
qos_init();
}
-#define MSTPSR1 0xE6150038
-#define SMSTPCR1 0xE6150134
#define TMU0_MSTP125 (1 << 25)
-
-#define MSTPSR7 0xE61501C4
-#define SMSTPCR7 0xE615014C
#define SCIF2_MSTP719 (1 << 19)
-
-#define MSTPSR8 0xE61509A0
-#define SMSTPCR8 0xE6150990
#define ETHER_MSTP813 (1 << 13)
-
-#define MSTPSR3 0xE6150048
-#define SMSTPCR3 0xE615013C
#define IIC1_MSTP323 (1 << 23)
-
-#define mstp_setbits(type, addr, saddr, set) \
- out_##type((saddr), in_##type(addr) | (set))
-#define mstp_clrbits(type, addr, saddr, clear) \
- out_##type((saddr), in_##type(addr) & ~(clear))
-#define mstp_setbits_le32(addr, saddr, set) \
- mstp_setbits(le32, addr, saddr, set)
-#define mstp_clrbits_le32(addr, saddr, clear) \
- mstp_clrbits(le32, addr, saddr, clear)
+#define MMC0_MSTP315 (1 << 15)
int board_early_init_f(void)
{
@@ -76,15 +59,13 @@ int board_early_init_f(void)
/* IIC1 / sh-i2c ch1 */
mstp_clrbits_le32(MSTPSR3, SMSTPCR3, IIC1_MSTP323);
+#ifdef CONFIG_SH_MMCIF
+ /* MMC */
+ mstp_clrbits_le32(MSTPSR3, SMSTPCR3, MMC0_MSTP315);
+#endif
return 0;
}
-void arch_preboot_os(void)
-{
- /* Disable TMU0 */
- mstp_setbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125);
-}
-
int board_init(void)
{
/* adress of boot parameters */
@@ -145,6 +126,19 @@ int board_eth_init(bd_t *bis)
#endif
}
+int board_mmc_init(bd_t *bis)
+{
+ int ret = 0;
+
+#ifdef CONFIG_SH_MMCIF
+ gpio_request(GPIO_GP_4_31, NULL);
+ gpio_set_value(GPIO_GP_4_31, 1);
+
+ ret = mmcif_mmc_init();
+#endif
+ return ret;
+}
+
int dram_init(void)
{
gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
diff --git a/board/renesas/gose/Makefile b/board/renesas/gose/Makefile
index a4fb6cc..2dac748 100644
--- a/board/renesas/gose/Makefile
+++ b/board/renesas/gose/Makefile
@@ -6,4 +6,4 @@
# SPDX-License-Identifier: GPL-2.0
#
-obj-y := gose.o qos.o
+obj-y := gose.o qos.o ../rcar-gen2-common/common.o
diff --git a/board/renesas/gose/gose.c b/board/renesas/gose/gose.c
index 715fba0..677b976 100644
--- a/board/renesas/gose/gose.c
+++ b/board/renesas/gose/gose.c
@@ -15,6 +15,7 @@
#include <asm/arch/sys_proto.h>
#include <asm/gpio.h>
#include <asm/arch/rmobile.h>
+#include <asm/arch/rcar-mstp.h>
#include <netdev.h>
#include <miiphy.h>
#include <i2c.h>
@@ -41,27 +42,10 @@ void s_init(void)
qos_init();
}
-#define MSTPSR1 0xE6150038
-#define SMSTPCR1 0xE6150134
#define TMU0_MSTP125 (1 << 25)
-
-#define MSTPSR7 0xE61501C4
-#define SMSTPCR7 0xE615014C
#define SCIF0_MSTP721 (1 << 21)
-
-#define MSTPSR8 0xE61509A0
-#define SMSTPCR8 0xE6150990
#define ETHER_MSTP813 (1 << 13)
-#define mstp_setbits(type, addr, saddr, set) \
- out_##type((saddr), in_##type(addr) | (set))
-#define mstp_clrbits(type, addr, saddr, clear) \
- out_##type((saddr), in_##type(addr) & ~(clear))
-#define mstp_setbits_le32(addr, saddr, set) \
- mstp_setbits(le32, addr, saddr, set)
-#define mstp_clrbits_le32(addr, saddr, clear) \
- mstp_clrbits(le32, addr, saddr, clear)
-
int board_early_init_f(void)
{
/* TMU0 */
@@ -76,16 +60,6 @@ int board_early_init_f(void)
return 0;
}
-#define TSTR0 0x04
-#define TSTR0_STR0 0x01
-void arch_preboot_os(void)
-{
- /* stop TMU0 */
- mstp_clrbits_le32(TMU_BASE + TSTR0, TMU_BASE + TSTR0, TSTR0_STR0);
- /* Disable TMU0 */
- mstp_setbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125);
-}
-
#define PUPR5 0xE6060114
#define PUPR5_ETH 0x3FFC0000
#define PUPR5_ETH_MAGIC (1 << 27)
diff --git a/board/renesas/koelsch/Makefile b/board/renesas/koelsch/Makefile
index b4d0183..c10bba5 100644
--- a/board/renesas/koelsch/Makefile
+++ b/board/renesas/koelsch/Makefile
@@ -6,4 +6,4 @@
# SPDX-License-Identifier: GPL-2.0
#
-obj-y := koelsch.o qos.o
+obj-y := koelsch.o qos.o ../rcar-gen2-common/common.o
diff --git a/board/renesas/koelsch/koelsch.c b/board/renesas/koelsch/koelsch.c
index 244bc58..10fa571 100644
--- a/board/renesas/koelsch/koelsch.c
+++ b/board/renesas/koelsch/koelsch.c
@@ -16,6 +16,7 @@
#include <asm/arch/sys_proto.h>
#include <asm/gpio.h>
#include <asm/arch/rmobile.h>
+#include <asm/arch/rcar-mstp.h>
#include <netdev.h>
#include <miiphy.h>
#include <i2c.h>
@@ -43,27 +44,10 @@ void s_init(void)
qos_init();
}
-#define MSTPSR1 0xE6150038
-#define SMSTPCR1 0xE6150134
#define TMU0_MSTP125 (1 << 25)
-
-#define MSTPSR7 0xE61501C4
-#define SMSTPCR7 0xE615014C
#define SCIF0_MSTP721 (1 << 21)
-
-#define MSTPSR8 0xE61509A0
-#define SMSTPCR8 0xE6150990
#define ETHER_MSTP813 (1 << 13)
-#define mstp_setbits(type, addr, saddr, set) \
- out_##type((saddr), in_##type(addr) | (set))
-#define mstp_clrbits(type, addr, saddr, clear) \
- out_##type((saddr), in_##type(addr) & ~(clear))
-#define mstp_setbits_le32(addr, saddr, set) \
- mstp_setbits(le32, addr, saddr, set)
-#define mstp_clrbits_le32(addr, saddr, clear) \
- mstp_clrbits(le32, addr, saddr, clear)
-
int board_early_init_f(void)
{
mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125);
@@ -77,12 +61,6 @@ int board_early_init_f(void)
return 0;
}
-void arch_preboot_os(void)
-{
- /* Disable TMU0 */
- mstp_setbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125);
-}
-
/* LSI pin pull-up control */
#define PUPR5 0xe6060114
#define PUPR5_ETH 0x3FFC0000
diff --git a/board/renesas/lager/Makefile b/board/renesas/lager/Makefile
index 034c6f8..8d03461 100644
--- a/board/renesas/lager/Makefile
+++ b/board/renesas/lager/Makefile
@@ -6,4 +6,4 @@
# SPDX-License-Identifier: GPL-2.0
#
-obj-y := lager.o qos.o
+obj-y := lager.o qos.o ../rcar-gen2-common/common.o
diff --git a/board/renesas/lager/lager.c b/board/renesas/lager/lager.c
index 93273b2..d1e29d2 100644
--- a/board/renesas/lager/lager.c
+++ b/board/renesas/lager/lager.c
@@ -18,8 +18,11 @@
#include <asm/arch/sys_proto.h>
#include <asm/gpio.h>
#include <asm/arch/rmobile.h>
+#include <asm/arch/rcar-mstp.h>
+#include <asm/arch/mmc.h>
#include <miiphy.h>
#include <i2c.h>
+#include <mmc.h>
#include "qos.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -50,26 +53,10 @@ void s_init(void)
qos_init();
}
-#define MSTPSR1 0xE6150038
-#define SMSTPCR1 0xE6150134
#define TMU0_MSTP125 (1 << 25)
-
-#define MSTPSR7 0xE61501C4
-#define SMSTPCR7 0xE615014C
#define SCIF0_MSTP721 (1 << 21)
-
-#define MSTPSR8 0xE61509A0
-#define SMSTPCR8 0xE6150990
#define ETHER_MSTP813 (1 << 13)
-
-#define mstp_setbits(type, addr, saddr, set) \
- out_##type((saddr), in_##type(addr) | (set))
-#define mstp_clrbits(type, addr, saddr, clear) \
- out_##type((saddr), in_##type(addr) & ~(clear))
-#define mstp_setbits_le32(addr, saddr, set) \
- mstp_setbits(le32, addr, saddr, set)
-#define mstp_clrbits_le32(addr, saddr, clear) \
- mstp_clrbits(le32, addr, saddr, clear)
+#define MMC1_MSTP305 (1 << 5)
int board_early_init_f(void)
{
@@ -79,16 +66,12 @@ int board_early_init_f(void)
mstp_clrbits_le32(MSTPSR7, SMSTPCR7, SCIF0_MSTP721);
/* ETHER */
mstp_clrbits_le32(MSTPSR8, SMSTPCR8, ETHER_MSTP813);
+ /* eMMC */
+ mstp_clrbits_le32(MSTPSR3, SMSTPCR3, MMC1_MSTP305);
return 0;
}
-void arch_preboot_os(void)
-{
- /* Disable TMU0 */
- mstp_setbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125);
-}
-
DECLARE_GLOBAL_DATA_PTR;
int board_init(void)
{
@@ -163,6 +146,28 @@ int board_phy_config(struct phy_device *phydev)
return 0;
}
+int board_mmc_init(bd_t *bis)
+{
+ int ret = 0;
+
+#ifdef CONFIG_SH_MMCIF
+ gpio_request(GPIO_FN_MMC1_D0, NULL);
+ gpio_request(GPIO_FN_MMC1_D1, NULL);
+ gpio_request(GPIO_FN_MMC1_D2, NULL);
+ gpio_request(GPIO_FN_MMC1_D3, NULL);
+ gpio_request(GPIO_FN_MMC1_D4, NULL);
+ gpio_request(GPIO_FN_MMC1_D5, NULL);
+ gpio_request(GPIO_FN_MMC1_D6, NULL);
+ gpio_request(GPIO_FN_MMC1_D7, NULL);
+ gpio_request(GPIO_FN_MMC1_CLK, NULL);
+ gpio_request(GPIO_FN_MMC1_CMD, NULL);
+
+ ret = mmcif_mmc_init();
+#endif
+ return ret;
+}
+
+
int dram_init(void)
{
gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
diff --git a/board/renesas/rcar-gen2-common/common.c b/board/renesas/rcar-gen2-common/common.c
new file mode 100644
index 0000000..0103f42
--- /dev/null
+++ b/board/renesas/rcar-gen2-common/common.c
@@ -0,0 +1,59 @@
+/*
+ * board/renesas/rcar-gen2-common/common.c
+ *
+ * Copyright (C) 2013 Renesas Electronics Corporation
+ * Copyright (C) 2013 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/rmobile.h>
+#include <asm/arch/rcar-mstp.h>
+
+#define TSTR0 0x04
+#define TSTR0_STR0 0x01
+
+static struct mstp_ctl mstptbl[] = {
+ { SMSTPCR0, MSTP0_BITS, CONFIG_SMSTP0_ENA,
+ RMSTPCR0, MSTP0_BITS, CONFIG_RMSTP0_ENA },
+ { SMSTPCR1, MSTP1_BITS, CONFIG_SMSTP1_ENA,
+ RMSTPCR1, MSTP1_BITS, CONFIG_RMSTP1_ENA },
+ { SMSTPCR2, MSTP2_BITS, CONFIG_SMSTP2_ENA,
+ RMSTPCR2, MSTP2_BITS, CONFIG_RMSTP2_ENA },
+ { SMSTPCR3, MSTP3_BITS, CONFIG_SMSTP3_ENA,
+ RMSTPCR3, MSTP3_BITS, CONFIG_RMSTP3_ENA },
+ { SMSTPCR4, MSTP4_BITS, CONFIG_SMSTP4_ENA,
+ RMSTPCR4, MSTP4_BITS, CONFIG_RMSTP4_ENA },
+ { SMSTPCR5, MSTP5_BITS, CONFIG_SMSTP5_ENA,
+ RMSTPCR5, MSTP5_BITS, CONFIG_RMSTP5_ENA },
+ /* No MSTP6 */
+ { SMSTPCR7, MSTP7_BITS, CONFIG_SMSTP7_ENA,
+ RMSTPCR7, MSTP7_BITS, CONFIG_RMSTP7_ENA },
+ { SMSTPCR8, MSTP8_BITS, CONFIG_SMSTP8_ENA,
+ RMSTPCR8, MSTP8_BITS, CONFIG_RMSTP8_ENA },
+ { SMSTPCR9, MSTP9_BITS, CONFIG_SMSTP9_ENA,
+ RMSTPCR9, MSTP9_BITS, CONFIG_RMSTP9_ENA },
+ { SMSTPCR10, MSTP10_BITS, CONFIG_SMSTP10_ENA,
+ RMSTPCR10, MSTP10_BITS, CONFIG_RMSTP10_ENA },
+ { SMSTPCR11, MSTP11_BITS, CONFIG_SMSTP1_ENA,
+ RMSTPCR11, MSTP11_BITS, CONFIG_RMSTP11_ENA },
+};
+
+void arch_preboot_os(void)
+{
+ int i;
+
+ /* stop TMU0 */
+ mstp_clrbits_le32(TMU_BASE + TSTR0, TMU_BASE + TSTR0, TSTR0_STR0);
+
+ /* Stop module clock */
+ for (i = 0; i < ARRAY_SIZE(mstptbl); i++) {
+ mstp_setclrbits_le32(mstptbl[i].s_addr, mstptbl[i].s_dis,
+ mstptbl[i].s_ena);
+ mstp_setclrbits_le32(mstptbl[i].r_addr, mstptbl[i].r_dis,
+ mstptbl[i].r_ena);
+ }
+}
diff --git a/board/siemens/common/board.c b/board/siemens/common/board.c
index 2782bcc..cc0ac6b 100644
--- a/board/siemens/common/board.c
+++ b/board/siemens/common/board.c
@@ -96,15 +96,6 @@ const struct dpll_params *get_dpll_ddr_params(void)
return &dpll_ddr;
}
-#ifdef CONFIG_BOARD_LATE_INIT
-int board_late_init(void)
-{
- omap_nand_switch_ecc(1, 8);
-
- return 0;
-}
-#endif
-
#ifndef CONFIG_SPL_BUILD
#if defined(BOARD_DFU_BUTTON_GPIO)
/*
diff --git a/board/siemens/common/factoryset.c b/board/siemens/common/factoryset.c
index 266dbbb..7baac3d 100644
--- a/board/siemens/common/factoryset.c
+++ b/board/siemens/common/factoryset.c
@@ -86,6 +86,7 @@ int get_factory_record_val(unsigned char *eeprom_buf, int size, uchar *record,
int i, nxt = 0;
int c;
unsigned char end = 0xff;
+ unsigned char tmp;
for (i = 0; fact_get_char(i) != end; i = nxt) {
nxt = i + 1;
@@ -93,6 +94,7 @@ int get_factory_record_val(unsigned char *eeprom_buf, int size, uchar *record,
int pos;
int endpos;
int z;
+ int level = 0;
c = strncmp((char *)&eeprom_buf[i + 1], (char *)record,
strlen((char *)record));
@@ -103,22 +105,30 @@ int get_factory_record_val(unsigned char *eeprom_buf, int size, uchar *record,
/* search for "<" */
c = -1;
for (z = pos; fact_get_char(z) != end; z++) {
- if ((fact_get_char(z) == '<') ||
- (fact_get_char(z) == '>')) {
- endpos = z;
- nxt = endpos;
- c = 0;
- break;
+ if (fact_get_char(z) == '<') {
+ if (level == 0) {
+ endpos = z;
+ nxt = endpos;
+ c = 0;
+ break;
+ } else {
+ level--;
+ }
}
+ if (fact_get_char(z) == '>')
+ level++;
}
+ } else {
+ continue;
}
if (c == 0) {
/* end found -> call get_factory_val */
+ tmp = eeprom_buf[endpos];
eeprom_buf[endpos] = end;
ret = get_factory_val(&eeprom_buf[pos],
- size - pos, name, buf, len);
+ endpos - pos, name, buf, len);
/* fix buffer */
- eeprom_buf[endpos] = '<';
+ eeprom_buf[endpos] = tmp;
debug("%s: %s.%s = %s\n",
__func__, record, name, buf);
return ret;
@@ -210,15 +220,6 @@ int factoryset_read_eeprom(int i2c_addr)
printf("DFU USB: VID = 0x%4x, PID = 0x%4x\n", factory_dat.usb_vendor_id,
factory_dat.usb_product_id);
#endif
- if (0 <= get_factory_record_val(cp, size, (uchar *)"DEV",
- (uchar *)"id", buf,
- MAX_STRING_LENGTH)) {
- if (strncmp((const char *)buf, "PXM50", 5) == 0)
- factory_dat.pxm50 = 1;
- else
- factory_dat.pxm50 = 0;
- }
- debug("PXM50: %d\n", factory_dat.pxm50);
#if defined(CONFIG_VIDEO)
if (0 <= get_factory_record_val(cp, size, (uchar *)"DISP1",
(uchar *)"name", factory_dat.disp_name,
@@ -238,6 +239,23 @@ int factoryset_read_eeprom(int i2c_addr)
NULL, 16);
debug("version number: %d\n", factory_dat.version);
}
+ /* Get ASN from factory set if available */
+ if (0 <= get_factory_record_val(cp, size, (uchar *)"DEV",
+ (uchar *)"id", factory_dat.asn,
+ MAX_STRING_LENGTH)) {
+ debug("factoryset asn: %s\n", factory_dat.asn);
+ } else {
+ factory_dat.asn[0] = 0;
+ }
+ /* Get COMP/ver from factory set if available */
+ if (0 <= get_factory_record_val(cp, size, (uchar *)"COMP",
+ (uchar *)"ver",
+ factory_dat.comp_version,
+ MAX_STRING_LENGTH)) {
+ debug("factoryset COMP/ver: %s\n", factory_dat.comp_version);
+ } else {
+ strcpy((char *)factory_dat.comp_version, "1.0");
+ }
return 0;
diff --git a/board/siemens/common/factoryset.h b/board/siemens/common/factoryset.h
index 4d6de10..3f23d5e 100644
--- a/board/siemens/common/factoryset.h
+++ b/board/siemens/common/factoryset.h
@@ -20,6 +20,8 @@ struct factorysetcontainer {
#endif
unsigned char serial[MAX_STRING_LENGTH];
int version;
+ uchar asn[MAX_STRING_LENGTH];
+ uchar comp_version[MAX_STRING_LENGTH];
};
int factoryset_read_eeprom(int i2c_addr);
diff --git a/board/siemens/draco/board.c b/board/siemens/draco/board.c
index 9be2e34..ede73ba 100644
--- a/board/siemens/draco/board.c
+++ b/board/siemens/draco/board.c
@@ -280,4 +280,13 @@ U_BOOT_CMD(
#endif /* #if defined(CONFIG_DRIVER_TI_CPSW) */
#endif /* #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) */
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
+{
+ omap_nand_switch_ecc(1, 8);
+
+ return 0;
+}
+#endif
+
#include "../common/board.c"
diff --git a/board/siemens/pxm2/board.c b/board/siemens/pxm2/board.c
index 559af0e..264ba02 100644
--- a/board/siemens/pxm2/board.c
+++ b/board/siemens/pxm2/board.c
@@ -428,4 +428,38 @@ static int board_video_init(void)
return 0;
}
#endif
+
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
+{
+ int ret;
+
+ omap_nand_switch_ecc(1, 8);
+
+#ifdef CONFIG_FACTORYSET
+ if (factory_dat.asn[0] != 0) {
+ char tmp[2 * MAX_STRING_LENGTH + 2];
+
+ if (strncmp((const char *)factory_dat.asn, "PXM50", 5) == 0)
+ factory_dat.pxm50 = 1;
+ else
+ factory_dat.pxm50 = 0;
+ sprintf(tmp, "%s_%s", factory_dat.asn,
+ factory_dat.comp_version);
+ ret = setenv("boardid", tmp);
+ if (ret)
+ printf("error setting board id\n");
+ } else {
+ factory_dat.pxm50 = 1;
+ ret = setenv("boardid", "PXM50_1.0");
+ if (ret)
+ printf("error setting board id\n");
+ }
+ debug("PXM50: %d\n", factory_dat.pxm50);
+#endif
+
+ return 0;
+}
+#endif
+
#include "../common/board.c"
diff --git a/board/siemens/rut/board.c b/board/siemens/rut/board.c
index 1752df2..fb840f7 100644
--- a/board/siemens/rut/board.c
+++ b/board/siemens/rut/board.c
@@ -467,4 +467,27 @@ static int board_video_init(void)
return 0;
}
#endif /* ifdef CONFIG_VIDEO */
+
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
+{
+ int ret;
+ char tmp[2 * MAX_STRING_LENGTH + 2];
+
+ omap_nand_switch_ecc(1, 8);
+
+ if (factory_dat.asn[0] != 0)
+ sprintf(tmp, "%s_%s", factory_dat.asn,
+ factory_dat.comp_version);
+ else
+ sprintf(tmp, "QMX7.E38_4.0");
+
+ ret = setenv("boardid", tmp);
+ if (ret)
+ printf("error setting board id\n");
+
+ return 0;
+}
+#endif
+
#include "../common/board.c"
diff --git a/board/solidrun/hummingboard/hummingboard.c b/board/solidrun/hummingboard/hummingboard.c
index 6d204b3..52c384b 100644
--- a/board/solidrun/hummingboard/hummingboard.c
+++ b/board/solidrun/hummingboard/hummingboard.c
@@ -146,7 +146,7 @@ int board_eth_init(bd_t *bis)
{
struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
- int ret = enable_fec_anatop_clock(ENET_25MHz);
+ int ret = enable_fec_anatop_clock(ENET_25MHZ);
if (ret)
return ret;
diff --git a/board/st/stv0991/Kconfig b/board/st/stv0991/Kconfig
new file mode 100644
index 0000000..8bda349
--- /dev/null
+++ b/board/st/stv0991/Kconfig
@@ -0,0 +1,23 @@
+if TARGET_STV0991
+
+config SYS_CPU
+ string
+ default "armv7"
+
+config SYS_BOARD
+ string
+ default "stv0991"
+
+config SYS_VENDOR
+ string
+ default "st"
+
+config SYS_SOC
+ string
+ default "stv0991"
+
+config SYS_CONFIG_NAME
+ string
+ default "stv0991"
+
+endif
diff --git a/board/st/stv0991/MAINTAINERS b/board/st/stv0991/MAINTAINERS
new file mode 100644
index 0000000..87221e9
--- /dev/null
+++ b/board/st/stv0991/MAINTAINERS
@@ -0,0 +1,5 @@
+STV0991 APPLICATION BOARD
+M: Vikas Manocha <vikas.manocha@st.com>
+S: Maintained
+F: board/st/stv0991/
+F: include/configs/stv0991.h
diff --git a/board/st/stv0991/Makefile b/board/st/stv0991/Makefile
new file mode 100644
index 0000000..fb5169a
--- /dev/null
+++ b/board/st/stv0991/Makefile
@@ -0,0 +1,8 @@
+#
+# (C) Copyright 2014
+# Vikas Manocha, ST Microelectronics, vikas.manocha@stcom
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y := stv0991.o
diff --git a/board/st/stv0991/stv0991.c b/board/st/stv0991/stv0991.c
new file mode 100644
index 0000000..f465699
--- /dev/null
+++ b/board/st/stv0991/stv0991.c
@@ -0,0 +1,104 @@
+/*
+ * (C) Copyright 2014
+ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <miiphy.h>
+#include <asm/arch/stv0991_periph.h>
+#include <asm/arch/stv0991_defs.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/gpio.h>
+#include <netdev.h>
+#include <asm/io.h>
+#include <dm/platdata.h>
+#include <dm/platform_data/serial_pl01x.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct gpio_regs *const gpioa_regs =
+ (struct gpio_regs *) GPIOA_BASE_ADDR;
+
+static const struct pl01x_serial_platdata serial_platdata = {
+ .base = 0x80406000,
+ .type = TYPE_PL011,
+ .clock = 2700 * 1000,
+};
+
+U_BOOT_DEVICE(stv09911_serials) = {
+ .name = "serial_pl01x",
+ .platdata = &serial_platdata,
+};
+
+#ifdef CONFIG_SHOW_BOOT_PROGRESS
+void show_boot_progress(int progress)
+{
+ printf("%i\n", progress);
+}
+#endif
+
+void enable_eth_phy(void)
+{
+ /* Set GPIOA_06 pad HIGH (Appli board)*/
+ writel(readl(&gpioa_regs->dir) | 0x40, &gpioa_regs->dir);
+ writel(readl(&gpioa_regs->data) | 0x40, &gpioa_regs->data);
+}
+int board_eth_enable(void)
+{
+ stv0991_pinmux_config(ETH_GPIOB_10_31_C_0_4);
+ clock_setup(ETH_CLOCK_CFG);
+ enable_eth_phy();
+ return 0;
+}
+
+/*
+ * Miscellaneous platform dependent initialisations
+ */
+int board_init(void)
+{
+ board_eth_enable();
+ return 0;
+}
+
+int board_uart_init(void)
+{
+ stv0991_pinmux_config(UART_GPIOC_30_31);
+ clock_setup(UART_CLOCK_CFG);
+ return 0;
+}
+
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+int board_early_init_f(void)
+{
+ board_uart_init();
+ return 0;
+}
+#endif
+
+int dram_init(void)
+{
+ gd->ram_size = PHYS_SDRAM_1_SIZE;
+ return 0;
+}
+
+void dram_init_banksize(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+}
+
+#ifdef CONFIG_CMD_NET
+int board_eth_init(bd_t *bis)
+{
+ int ret = 0;
+
+#if defined(CONFIG_DESIGNWARE_ETH)
+ u32 interface = PHY_INTERFACE_MODE_MII;
+ if (designware_initialize(GMAC_BASE_ADDR, interface) >= 0)
+ ret++;
+#endif
+ return ret;
+}
+#endif
diff --git a/board/tbs/tbs2910/Kconfig b/board/tbs/tbs2910/Kconfig
index c514e24..84b243e 100644
--- a/board/tbs/tbs2910/Kconfig
+++ b/board/tbs/tbs2910/Kconfig
@@ -1,23 +1,15 @@
if TARGET_TBS2910
-config SYS_CPU
- string
- default "armv7"
-
config SYS_BOARD
- string
default "tbs2910"
config SYS_VENDOR
- string
default "tbs"
config SYS_SOC
- string
default "mx6"
config SYS_CONFIG_NAME
- string
default "tbs2910"
endif
diff --git a/board/technexion/tao3530/tao3530.c b/board/technexion/tao3530/tao3530.c
index 44a8240..744ff44 100644
--- a/board/technexion/tao3530/tao3530.c
+++ b/board/technexion/tao3530/tao3530.c
@@ -188,6 +188,13 @@ int board_mmc_init(bd_t *bis)
}
#endif
+#if defined(CONFIG_GENERIC_MMC)
+void board_mmc_power_init(void)
+{
+ twl4030_power_mmc_init(0);
+}
+#endif
+
#if defined(CONFIG_USB_EHCI) && !defined(CONFIG_SPL_BUILD)
/* Call usb_stop() before starting the kernel */
void show_boot_progress(int val)
diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
index 4c5e381..7b37fbe 100644
--- a/board/ti/beagle/beagle.c
+++ b/board/ti/beagle/beagle.c
@@ -534,6 +534,13 @@ int board_mmc_init(bd_t *bis)
}
#endif
+#if defined(CONFIG_GENERIC_MMC)
+void board_mmc_power_init(void)
+{
+ twl4030_power_mmc_init(0);
+}
+#endif
+
#if defined(CONFIG_USB_EHCI) && !defined(CONFIG_SPL_BUILD)
/* Call usb_stop() before starting the kernel */
void show_boot_progress(int val)
diff --git a/board/ti/beagle_x15/Kconfig b/board/ti/beagle_x15/Kconfig
new file mode 100644
index 0000000..a305ff1
--- /dev/null
+++ b/board/ti/beagle_x15/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_BEAGLE_X15
+
+config SYS_BOARD
+ default "beagle_x15"
+
+config SYS_VENDOR
+ default "ti"
+
+config SYS_CONFIG_NAME
+ default "beagle_x15"
+
+endif
diff --git a/board/ti/beagle_x15/Makefile b/board/ti/beagle_x15/Makefile
new file mode 100644
index 0000000..5cd6873
--- /dev/null
+++ b/board/ti/beagle_x15/Makefile
@@ -0,0 +1,8 @@
+#
+# (C) Copyright 2014
+# Texas Instruments, <www.ti.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y := board.o
diff --git a/board/ti/beagle_x15/board.c b/board/ti/beagle_x15/board.c
new file mode 100644
index 0000000..db96e34
--- /dev/null
+++ b/board/ti/beagle_x15/board.c
@@ -0,0 +1,395 @@
+/*
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Author: Felipe Balbi <balbi@ti.com>
+ *
+ * Based on board/ti/dra7xx/evm.c
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <palmas.h>
+#include <sata.h>
+#include <usb.h>
+#include <asm/omap_common.h>
+#include <asm/emif.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/mmc_host_def.h>
+#include <asm/arch/sata.h>
+#include <asm/arch/gpio.h>
+#include <environment.h>
+
+#include "mux_data.h"
+
+#ifdef CONFIG_DRIVER_TI_CPSW
+#include <cpsw.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+const struct omap_sysinfo sysinfo = {
+ "Board: BeagleBoard x15\n"
+};
+
+static const struct dmm_lisa_map_regs beagle_x15_lisa_regs = {
+ .dmm_lisa_map_3 = 0x80740300,
+ .is_ma_present = 0x1
+};
+
+void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs)
+{
+ *dmm_lisa_regs = &beagle_x15_lisa_regs;
+}
+
+static const struct emif_regs beagle_x15_emif1_ddr3_532mhz_emif_regs = {
+ .sdram_config_init = 0x61851b32,
+ .sdram_config = 0x61851b32,
+ .sdram_config2 = 0x00000000,
+ .ref_ctrl = 0x00001035,
+ .sdram_tim1 = 0xceef266b,
+ .sdram_tim2 = 0x328f7fda,
+ .sdram_tim3 = 0x027f88a8,
+ .read_idle_ctrl = 0x00050001,
+ .zq_config = 0x0007190b,
+ .temp_alert_config = 0x00000000,
+ .emif_ddr_phy_ctlr_1_init = 0x0e24400a,
+ .emif_ddr_phy_ctlr_1 = 0x0e24400a,
+ .emif_ddr_ext_phy_ctrl_1 = 0x10040100,
+ .emif_ddr_ext_phy_ctrl_2 = 0x00740074,
+ .emif_ddr_ext_phy_ctrl_3 = 0x00780078,
+ .emif_ddr_ext_phy_ctrl_4 = 0x007c007c,
+ .emif_ddr_ext_phy_ctrl_5 = 0x007b007b,
+ .emif_rd_wr_lvl_rmp_win = 0x00000000,
+ .emif_rd_wr_lvl_rmp_ctl = 0x00000000,
+ .emif_rd_wr_lvl_ctl = 0x00000000,
+ .emif_rd_wr_exec_thresh = 0x00000305
+};
+
+static const u32 beagle_x15_emif1_ddr3_ext_phy_ctrl_const_regs[] = {
+ 0x00800080,
+ 0x00360036,
+ 0x00340034,
+ 0x00360036,
+ 0x00350035,
+ 0x00350035,
+
+ 0x01ff01ff,
+ 0x01ff01ff,
+ 0x01ff01ff,
+ 0x01ff01ff,
+ 0x01ff01ff,
+
+ 0x00430043,
+ 0x003e003e,
+ 0x004a004a,
+ 0x00470047,
+ 0x00400040,
+
+ 0x00000000,
+ 0x00600020,
+ 0x40010080,
+ 0x08102040,
+
+ 0x00400040,
+ 0x00400040,
+ 0x00400040,
+ 0x00400040,
+ 0x00400040
+};
+
+static const struct emif_regs beagle_x15_emif2_ddr3_532mhz_emif_regs = {
+ .sdram_config_init = 0x61851b32,
+ .sdram_config = 0x61851b32,
+ .sdram_config2 = 0x00000000,
+ .ref_ctrl = 0x00001035,
+ .sdram_tim1 = 0xceef266b,
+ .sdram_tim2 = 0x328f7fda,
+ .sdram_tim3 = 0x027f88a8,
+ .read_idle_ctrl = 0x00050001,
+ .zq_config = 0x0007190b,
+ .temp_alert_config = 0x00000000,
+ .emif_ddr_phy_ctlr_1_init = 0x0e24400a,
+ .emif_ddr_phy_ctlr_1 = 0x0e24400a,
+ .emif_ddr_ext_phy_ctrl_1 = 0x10040100,
+ .emif_ddr_ext_phy_ctrl_2 = 0x00820082,
+ .emif_ddr_ext_phy_ctrl_3 = 0x008b008b,
+ .emif_ddr_ext_phy_ctrl_4 = 0x00800080,
+ .emif_ddr_ext_phy_ctrl_5 = 0x007e007e,
+ .emif_rd_wr_lvl_rmp_win = 0x00000000,
+ .emif_rd_wr_lvl_rmp_ctl = 0x00000000,
+ .emif_rd_wr_lvl_ctl = 0x00000000,
+ .emif_rd_wr_exec_thresh = 0x00000305
+};
+
+static const u32 beagle_x15_emif2_ddr3_ext_phy_ctrl_const_regs[] = {
+ 0x00800080,
+ 0x00370037,
+ 0x00390039,
+ 0x00360036,
+ 0x00370037,
+ 0x00350035,
+ 0x01ff01ff,
+ 0x01ff01ff,
+ 0x01ff01ff,
+ 0x01ff01ff,
+ 0x01ff01ff,
+ 0x00540054,
+ 0x00540054,
+ 0x004e004e,
+ 0x004c004c,
+ 0x00400040,
+
+ 0x00000000,
+ 0x00600020,
+ 0x40010080,
+ 0x08102040,
+
+ 0x00400040,
+ 0x00400040,
+ 0x00400040,
+ 0x00400040,
+ 0x00400040
+};
+
+void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs)
+{
+ switch (emif_nr) {
+ case 1:
+ *regs = &beagle_x15_emif1_ddr3_532mhz_emif_regs;
+ break;
+ case 2:
+ *regs = &beagle_x15_emif2_ddr3_532mhz_emif_regs;
+ break;
+ }
+}
+
+void emif_get_ext_phy_ctrl_const_regs(u32 emif_nr, const u32 **regs, u32 *size)
+{
+ switch (emif_nr) {
+ case 1:
+ *regs = beagle_x15_emif1_ddr3_ext_phy_ctrl_const_regs;
+ *size = ARRAY_SIZE(beagle_x15_emif1_ddr3_ext_phy_ctrl_const_regs);
+ break;
+ case 2:
+ *regs = beagle_x15_emif2_ddr3_ext_phy_ctrl_const_regs;
+ *size = ARRAY_SIZE(beagle_x15_emif2_ddr3_ext_phy_ctrl_const_regs);
+ break;
+ }
+}
+
+struct vcores_data beagle_x15_volts = {
+ .mpu.value = VDD_MPU_DRA752,
+ .mpu.efuse.reg = STD_FUSE_OPP_VMIN_MPU_NOM,
+ .mpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
+ .mpu.addr = TPS659038_REG_ADDR_SMPS12,
+ .mpu.pmic = &tps659038,
+
+ .eve.value = VDD_EVE_DRA752,
+ .eve.efuse.reg = STD_FUSE_OPP_VMIN_DSPEVE_NOM,
+ .eve.efuse.reg_bits = DRA752_EFUSE_REGBITS,
+ .eve.addr = TPS659038_REG_ADDR_SMPS45,
+ .eve.pmic = &tps659038,
+
+ .gpu.value = VDD_GPU_DRA752,
+ .gpu.efuse.reg = STD_FUSE_OPP_VMIN_GPU_NOM,
+ .gpu.efuse.reg_bits = DRA752_EFUSE_REGBITS,
+ .gpu.addr = TPS659038_REG_ADDR_SMPS45,
+ .gpu.pmic = &tps659038,
+
+ .core.value = VDD_CORE_DRA752,
+ .core.efuse.reg = STD_FUSE_OPP_VMIN_CORE_NOM,
+ .core.efuse.reg_bits = DRA752_EFUSE_REGBITS,
+ .core.addr = TPS659038_REG_ADDR_SMPS6,
+ .core.pmic = &tps659038,
+
+ .iva.value = VDD_IVA_DRA752,
+ .iva.efuse.reg = STD_FUSE_OPP_VMIN_IVA_NOM,
+ .iva.efuse.reg_bits = DRA752_EFUSE_REGBITS,
+ .iva.addr = TPS659038_REG_ADDR_SMPS45,
+ .iva.pmic = &tps659038,
+};
+
+void hw_data_init(void)
+{
+ *prcm = &dra7xx_prcm;
+ *dplls_data = &dra7xx_dplls;
+ *omap_vcores = &beagle_x15_volts;
+ *ctrl = &dra7xx_ctrl;
+}
+
+int board_init(void)
+{
+ gpmc_init();
+ gd->bd->bi_boot_params = (CONFIG_SYS_SDRAM_BASE + 0x100);
+
+ return 0;
+}
+
+int board_late_init(void)
+{
+ init_sata(0);
+ /*
+ * DEV_CTRL.DEV_ON = 1 please - else palmas switches off in 8 seconds
+ * This is the POWERHOLD-in-Low behavior.
+ */
+ palmas_i2c_write_u8(TPS65903X_CHIP_P1, 0xA0, 0x1);
+ return 0;
+}
+
+static void do_set_mux32(u32 base,
+ struct pad_conf_entry const *array, int size)
+{
+ int i;
+ struct pad_conf_entry *pad = (struct pad_conf_entry *)array;
+
+ for (i = 0; i < size; i++, pad++)
+ writel(pad->val, base + pad->offset);
+}
+
+void set_muxconf_regs_essential(void)
+{
+ do_set_mux32((*ctrl)->control_padconf_core_base,
+ core_padconf_array_essential,
+ sizeof(core_padconf_array_essential) /
+ sizeof(struct pad_conf_entry));
+}
+
+#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC)
+int board_mmc_init(bd_t *bis)
+{
+ omap_mmc_init(0, 0, 0, -1, -1);
+ omap_mmc_init(1, 0, 0, -1, -1);
+ return 0;
+}
+#endif
+
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_OS_BOOT)
+int spl_start_uboot(void)
+{
+ /* break into full u-boot on 'c' */
+ if (serial_tstc() && serial_getc() == 'c')
+ return 1;
+
+#ifdef CONFIG_SPL_ENV_SUPPORT
+ env_init();
+ env_relocate_spec();
+ if (getenv_yesno("boot_os") != 1)
+ return 1;
+#endif
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_DRIVER_TI_CPSW
+
+/* Delay value to add to calibrated value */
+#define RGMII0_TXCTL_DLY_VAL ((0x3 << 5) + 0x8)
+#define RGMII0_TXD0_DLY_VAL ((0x3 << 5) + 0x8)
+#define RGMII0_TXD1_DLY_VAL ((0x3 << 5) + 0x2)
+#define RGMII0_TXD2_DLY_VAL ((0x4 << 5) + 0x0)
+#define RGMII0_TXD3_DLY_VAL ((0x4 << 5) + 0x0)
+#define VIN2A_D13_DLY_VAL ((0x3 << 5) + 0x8)
+#define VIN2A_D17_DLY_VAL ((0x3 << 5) + 0x8)
+#define VIN2A_D16_DLY_VAL ((0x3 << 5) + 0x2)
+#define VIN2A_D15_DLY_VAL ((0x4 << 5) + 0x0)
+#define VIN2A_D14_DLY_VAL ((0x4 << 5) + 0x0)
+
+static void cpsw_control(int enabled)
+{
+ /* VTP can be added here */
+}
+
+static struct cpsw_slave_data cpsw_slaves[] = {
+ {
+ .slave_reg_ofs = 0x208,
+ .sliver_reg_ofs = 0xd80,
+ .phy_addr = 1,
+ },
+ {
+ .slave_reg_ofs = 0x308,
+ .sliver_reg_ofs = 0xdc0,
+ .phy_addr = 2,
+ },
+};
+
+static struct cpsw_platform_data cpsw_data = {
+ .mdio_base = CPSW_MDIO_BASE,
+ .cpsw_base = CPSW_BASE,
+ .mdio_div = 0xff,
+ .channels = 8,
+ .cpdma_reg_ofs = 0x800,
+ .slaves = 1,
+ .slave_data = cpsw_slaves,
+ .ale_reg_ofs = 0xd00,
+ .ale_entries = 1024,
+ .host_port_reg_ofs = 0x108,
+ .hw_stats_reg_ofs = 0x900,
+ .bd_ram_ofs = 0x2000,
+ .mac_control = (1 << 5),
+ .control = cpsw_control,
+ .host_port_num = 0,
+ .version = CPSW_CTRL_VERSION_2,
+};
+
+int board_eth_init(bd_t *bis)
+{
+ int ret;
+ uint8_t mac_addr[6];
+ uint32_t mac_hi, mac_lo;
+ uint32_t ctrl_val;
+
+ /* try reading mac address from efuse */
+ mac_lo = readl((*ctrl)->control_core_mac_id_0_lo);
+ mac_hi = readl((*ctrl)->control_core_mac_id_0_hi);
+ mac_addr[0] = (mac_hi & 0xFF0000) >> 16;
+ mac_addr[1] = (mac_hi & 0xFF00) >> 8;
+ mac_addr[2] = mac_hi & 0xFF;
+ mac_addr[3] = (mac_lo & 0xFF0000) >> 16;
+ mac_addr[4] = (mac_lo & 0xFF00) >> 8;
+ mac_addr[5] = mac_lo & 0xFF;
+
+ if (!getenv("ethaddr")) {
+ printf("<ethaddr> not set. Validating first E-fuse MAC\n");
+
+ if (is_valid_ether_addr(mac_addr))
+ eth_setenv_enetaddr("ethaddr", mac_addr);
+ }
+
+ mac_lo = readl((*ctrl)->control_core_mac_id_1_lo);
+ mac_hi = readl((*ctrl)->control_core_mac_id_1_hi);
+ mac_addr[0] = (mac_hi & 0xFF0000) >> 16;
+ mac_addr[1] = (mac_hi & 0xFF00) >> 8;
+ mac_addr[2] = mac_hi & 0xFF;
+ mac_addr[3] = (mac_lo & 0xFF0000) >> 16;
+ mac_addr[4] = (mac_lo & 0xFF00) >> 8;
+ mac_addr[5] = mac_lo & 0xFF;
+
+ if (!getenv("eth1addr")) {
+ if (is_valid_ether_addr(mac_addr))
+ eth_setenv_enetaddr("eth1addr", mac_addr);
+ }
+
+ ctrl_val = readl((*ctrl)->control_core_control_io1) & (~0x33);
+ ctrl_val |= 0x22;
+ writel(ctrl_val, (*ctrl)->control_core_control_io1);
+
+ ret = cpsw_register(&cpsw_data);
+ if (ret < 0)
+ printf("Error %d registering CPSW switch\n", ret);
+
+ return ret;
+}
+#endif
+
+#ifdef CONFIG_USB_XHCI_OMAP
+int board_usb_init(int index, enum usb_init_type init)
+{
+ setbits_le32((*prcm)->cm_l3init_usb_otg_ss_clkctrl,
+ OTG_SS_CLKCTRL_MODULEMODE_HW | OPTFCLKEN_REFCLK960M);
+
+ return 0;
+}
+#endif
diff --git a/board/ti/beagle_x15/mux_data.h b/board/ti/beagle_x15/mux_data.h
new file mode 100644
index 0000000..2294abe
--- /dev/null
+++ b/board/ti/beagle_x15/mux_data.h
@@ -0,0 +1,55 @@
+/*
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * Author: Felipe Balbi <balbi@ti.com>
+ *
+ * Based on board/ti/dra7xx/evm.c
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#ifndef _MUX_DATA_BEAGLE_X15_H_
+#define _MUX_DATA_BEAGLE_X15_H_
+
+#include <asm/arch/mux_dra7xx.h>
+
+const struct pad_conf_entry core_padconf_array_essential[] = {
+ {MMC1_CLK, (IEN | PTU | PDIS | M0)}, /* MMC1_CLK */
+ {MMC1_CMD, (IEN | PTU | PDIS | M0)}, /* MMC1_CMD */
+ {MMC1_DAT0, (IEN | PTU | PDIS | M0)}, /* MMC1_DAT0 */
+ {MMC1_DAT1, (IEN | PTU | PDIS | M0)}, /* MMC1_DAT1 */
+ {MMC1_DAT2, (IEN | PTU | PDIS | M0)}, /* MMC1_DAT2 */
+ {MMC1_DAT3, (IEN | PTU | PDIS | M0)}, /* MMC1_DAT3 */
+ {MMC1_SDCD, (FSC | IEN | PTU | PDIS | M0)}, /* MMC1_SDCD */
+ {MMC1_SDWP, (FSC | IEN | PTD | PEN | M14)}, /* MMC1_SDWP */
+ {GPMC_A19, (IEN | PTU | PDIS | M1)}, /* mmc2_dat4 */
+ {GPMC_A20, (IEN | PTU | PDIS | M1)}, /* mmc2_dat5 */
+ {GPMC_A21, (IEN | PTU | PDIS | M1)}, /* mmc2_dat6 */
+ {GPMC_A22, (IEN | PTU | PDIS | M1)}, /* mmc2_dat7 */
+ {GPMC_A23, (IEN | PTU | PDIS | M1)}, /* mmc2_clk */
+ {GPMC_A24, (IEN | PTU | PDIS | M1)}, /* mmc2_dat0 */
+ {GPMC_A25, (IEN | PTU | PDIS | M1)}, /* mmc2_dat1 */
+ {GPMC_A26, (IEN | PTU | PDIS | M1)}, /* mmc2_dat2 */
+ {GPMC_A27, (IEN | PTU | PDIS | M1)}, /* mmc2_dat3 */
+ {GPMC_CS1, (IEN | PTU | PDIS | M1)}, /* mmm2_cmd */
+ {UART3_RXD, (FSC | IEN | PTU | PDIS | M0)}, /* UART3_RXD */
+ {UART3_TXD, (FSC | IEN | PTU | PDIS | M0)}, /* UART3_TXD */
+ {I2C1_SDA, (IEN | PTU | PDIS | M0)}, /* I2C1_SDA */
+ {I2C1_SCL, (IEN | PTU | PDIS | M0)}, /* I2C1_SCL */
+ {MDIO_MCLK, (PTU | PEN | M0)}, /* MDIO_MCLK */
+ {MDIO_D, (IEN | PTU | PEN | M0)}, /* MDIO_D */
+ {RGMII0_TXC, (M0) },
+ {RGMII0_TXCTL, (M0) },
+ {RGMII0_TXD3, (M0) },
+ {RGMII0_TXD2, (M0) },
+ {RGMII0_TXD1, (M0) },
+ {RGMII0_TXD0, (M0) },
+ {RGMII0_RXC, (IEN | M0) },
+ {RGMII0_RXCTL, (IEN | M0) },
+ {RGMII0_RXD3, (IEN | M0) },
+ {RGMII0_RXD2, (IEN | M0) },
+ {RGMII0_RXD1, (IEN | M0) },
+ {RGMII0_RXD0, (IEN | M0) },
+ {USB1_DRVVBUS, (M0 | FSC) },
+ {SPI1_CS1, (PEN | IDIS | M14) }, /* GPIO7_11 */
+};
+#endif /* _MUX_DATA_BEAGLE_X15_H_ */
diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c
index 37df7b2..6522241 100644
--- a/board/ti/dra7xx/evm.c
+++ b/board/ti/dra7xx/evm.c
@@ -96,18 +96,6 @@ int board_late_init(void)
return 0;
}
-/**
- * @brief misc_init_r - Configure EVM board specific configurations
- * such as power configurations, ethernet initialization as phase2 of
- * boot sequence
- *
- * @return 0
- */
-int misc_init_r(void)
-{
- return 0;
-}
-
static void do_set_mux32(u32 base,
struct pad_conf_entry const *array, int size)
{
diff --git a/board/ti/dra7xx/mux_data.h b/board/ti/dra7xx/mux_data.h
index 7276014..4824077 100644
--- a/board/ti/dra7xx/mux_data.h
+++ b/board/ti/dra7xx/mux_data.h
@@ -130,8 +130,8 @@ const struct pad_conf_entry core_padconf_array_essential[] = {
{GPMC_A13, (IEN | PDIS | M1)}, /* QSPI1_RTCLK */
{GPMC_A14, (IEN | PDIS | M1)}, /* QSPI1_D[3] */
{GPMC_A15, (IEN | PDIS | M1)}, /* QSPI1_D[2] */
- {GPMC_A16, (IEN | PDIS | M1)}, /* QSPI1_D[1] */
- {GPMC_A17, (IEN | PDIS | M1)}, /* QSPI1_D[0] */
+ {GPMC_A16, (IEN | PDIS | M1)}, /* QSPI1_D[0] */
+ {GPMC_A17, (IEN | PDIS | M1)}, /* QSPI1_D[1] */
{GPMC_A18, (M1)}, /* QSPI1_SCLK */
{GPMC_A3, (IEN | PDIS | M1)}, /* QSPI1_CS2 */
{GPMC_A4, (IEN | PDIS | M1)}, /* QSPI1_CS3 */
diff --git a/board/ti/evm/evm.c b/board/ti/evm/evm.c
index 81dd081..3f93d9c 100644
--- a/board/ti/evm/evm.c
+++ b/board/ti/evm/evm.c
@@ -20,6 +20,7 @@
#include <asm/arch/mmc_host_def.h>
#include <asm/gpio.h>
#include <i2c.h>
+#include <twl4030.h>
#include <asm/mach-types.h>
#include <linux/mtd/nand.h>
#include "evm.h"
@@ -264,3 +265,10 @@ int board_mmc_init(bd_t *bis)
return omap_mmc_init(0, 0, 0, -1, -1);
}
#endif
+
+#if defined(CONFIG_GENERIC_MMC)
+void board_mmc_power_init(void)
+{
+ twl4030_power_mmc_init(0);
+}
+#endif
diff --git a/board/ti/sdp3430/sdp.c b/board/ti/sdp3430/sdp.c
index 957940d..7171363 100644
--- a/board/ti/sdp3430/sdp.c
+++ b/board/ti/sdp3430/sdp.c
@@ -195,4 +195,9 @@ int board_mmc_init(bd_t *bis)
{
return omap_mmc_init(0, 0, 0, -1, -1);
}
+
+void board_mmc_power_init(void)
+{
+ twl4030_power_mmc_init(0);
+}
#endif
diff --git a/board/timll/devkit8000/devkit8000.c b/board/timll/devkit8000/devkit8000.c
index bcbee73..b978044 100644
--- a/board/timll/devkit8000/devkit8000.c
+++ b/board/timll/devkit8000/devkit8000.c
@@ -124,6 +124,13 @@ int board_mmc_init(bd_t *bis)
}
#endif
+#if defined(CONFIG_GENERIC_MMC)
+void board_mmc_power_init(void)
+{
+ twl4030_power_mmc_init(0);
+}
+#endif
+
#if defined(CONFIG_DRIVER_DM9000) & !defined(CONFIG_SPL_BUILD)
/*
* Routine: board_eth_init
diff --git a/board/toradex/apalis_t30/apalis_t30.c b/board/toradex/apalis_t30/apalis_t30.c
index b9d694a..5d2c024 100644
--- a/board/toradex/apalis_t30/apalis_t30.c
+++ b/board/toradex/apalis_t30/apalis_t30.c
@@ -6,7 +6,7 @@
*/
#include <common.h>
-
+#include <dm.h>
#include <asm/arch/gp_padctrl.h>
#include <asm/arch/pinmux.h>
#include <asm/gpio.h>
@@ -38,23 +38,20 @@ void pinmux_init(void)
#ifdef CONFIG_PCI_TEGRA
int tegra_pcie_board_init(void)
{
- unsigned int old_bus;
+ struct udevice *dev;
u8 addr, data[1];
int err;
- old_bus = i2c_get_bus_num();
-
- err = i2c_set_bus_num(0);
+ err = i2c_get_chip_for_busnum(0, PMU_I2C_ADDRESS, &dev);
if (err) {
- debug("failed to set I2C bus\n");
+ debug("%s: Cannot find PMIC I2C chip\n", __func__);
return err;
}
-
/* TPS659110: VDD2_OP_REG = 1.05V */
data[0] = 0x27;
addr = 0x25;
- err = i2c_write(PMU_I2C_ADDRESS, addr, 1, data, 1);
+ err = i2c_write(dev, addr, data, 1);
if (err) {
debug("failed to set VDD supply\n");
return err;
@@ -64,7 +61,7 @@ int tegra_pcie_board_init(void)
data[0] = 0x0D;
addr = 0x24;
- err = i2c_write(PMU_I2C_ADDRESS, addr, 1, data, 1);
+ err = i2c_write(dev, addr, data, 1);
if (err) {
debug("failed to enable VDD supply\n");
return err;
@@ -74,14 +71,12 @@ int tegra_pcie_board_init(void)
data[0] = 0x0D;
addr = 0x35;
- err = i2c_write(PMU_I2C_ADDRESS, addr, 1, data, 1);
+ err = i2c_write(dev, addr, data, 1);
if (err) {
debug("failed to set AVDD supply\n");
return err;
}
- i2c_set_bus_num(old_bus);
-
return 0;
}
diff --git a/common/Makefile b/common/Makefile
index 9c47e20..c668a2f 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -8,22 +8,12 @@
# core
ifndef CONFIG_SPL_BUILD
obj-y += main.o
-obj-y += command.o
obj-y += exports.o
obj-y += hash.o
ifdef CONFIG_SYS_HUSH_PARSER
obj-y += cli_hush.o
endif
-# We always have this since drivers/ddr/fs/interactive.c needs it
-obj-y += cli_simple.o
-
-obj-y += cli.o
-obj-y += cli_readline.o
-obj-y += s_record.o
-obj-y += xyzModem.o
-obj-y += cmd_disk.o
-
# This option is not just y/n - it can have a numeric value
ifdef CONFIG_BOOTDELAY
obj-y += autoboot.o
@@ -272,4 +262,14 @@ endif
obj-$(CONFIG_CMD_BLOB) += cmd_blob.o
+# We always have this since drivers/ddr/fs/interactive.c needs it
+obj-y += cli_simple.o
+
+obj-y += cli.o
+obj-y += cli_readline.o
+obj-y += command.o
+obj-y += s_record.o
+obj-y += xyzModem.o
+obj-y += cmd_disk.o
+
CFLAGS_env_embedded.o := -Wa,--no-warn -DENV_CRC=$(shell tools/envcrc 2>/dev/null)
diff --git a/common/board_r.c b/common/board_r.c
index 1b8998d..4eb7a02 100644
--- a/common/board_r.c
+++ b/common/board_r.c
@@ -291,26 +291,14 @@ static int initr_flash(void)
{
ulong flash_size = 0;
bd_t *bd = gd->bd;
- int ok;
puts("Flash: ");
- if (board_flash_wp_on()) {
+ if (board_flash_wp_on())
printf("Uninitialized - Write Protect On\n");
- /* Since WP is on, we can't find real size. Set to 0 */
- ok = 1;
- } else {
+ else
flash_size = flash_init();
- ok = flash_size > 0;
- }
- if (!ok) {
- puts("*** failed ***\n");
-#ifdef CONFIG_PPC
- /* Why does PPC do this? */
- hang();
-#endif
- return -1;
- }
+
print_size(flash_size, "");
#ifdef CONFIG_SYS_FLASH_CHECKSUM
/*
@@ -454,24 +442,6 @@ static int initr_env(void)
return 0;
}
-#ifdef CONFIG_HERMES
-static int initr_hermes(void)
-{
- if ((gd->board_type >> 16) == 2)
- gd->bd->bi_ethspeed = gd->board_type & 0xFFFF;
- else
- gd->bd->bi_ethspeed = 0xFFFF;
- return 0;
-}
-
-static int initr_hermes_start(void)
-{
- if (gd->bd->bi_ethspeed != 0xFFFF)
- hermes_start_lxt980((int) gd->bd->bi_ethspeed);
- return 0;
-}
-#endif
-
#ifdef CONFIG_SC3
/* TODO: with new initcalls, move this into the driver */
extern void sc3_read_eeprom(void);
@@ -803,9 +773,6 @@ init_fnc_t init_sequence_r[] = {
#ifdef CONFIG_SC3
initr_sc3_read_eeprom,
#endif
-#ifdef CONFIG_HERMES
- initr_hermes,
-#endif
#if defined(CONFIG_ID_EEPROM) || defined(CONFIG_SYS_I2C_MAC_OFFSET)
mac_read_from_eeprom,
#endif
@@ -831,9 +798,6 @@ init_fnc_t init_sequence_r[] = {
#ifdef CONFIG_MISC_INIT_R
misc_init_r, /* miscellaneous platform-dependent init */
#endif
-#ifdef CONFIG_HERMES
- initr_hermes_start,
-#endif
INIT_FUNC_WATCHDOG_RESET
#ifdef CONFIG_CMD_KGDB
initr_kgdb,
diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c
index 3d37a86..f0b713c 100644
--- a/common/cmd_bdinfo.c
+++ b/common/cmd_bdinfo.c
@@ -144,9 +144,6 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
print_eth(5);
#endif
-#ifdef CONFIG_HERMES
- print_mhz("ethspeed", bd->bi_ethspeed);
-#endif
printf("IP addr = %s\n", getenv("ipaddr"));
printf("baudrate = %6u bps\n", gd->baudrate);
print_num("relocaddr", gd->relocaddr);
diff --git a/common/cmd_fuse.c b/common/cmd_fuse.c
index abab978..d4bc0f6 100644
--- a/common/cmd_fuse.c
+++ b/common/cmd_fuse.c
@@ -128,7 +128,7 @@ static int do_fuse(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
err:
puts("ERROR\n");
- return ret;
+ return CMD_RET_FAILURE;
}
U_BOOT_CMD(
diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c
index c266b88..22db1bb 100644
--- a/common/cmd_i2c.c
+++ b/common/cmd_i2c.c
@@ -69,8 +69,10 @@
#include <bootretry.h>
#include <cli.h>
#include <command.h>
+#include <dm.h>
#include <edid.h>
#include <environment.h>
+#include <errno.h>
#include <i2c.h>
#include <malloc.h>
#include <asm/byteorder.h>
@@ -117,6 +119,60 @@ static uchar i2c_no_probes[] = CONFIG_SYS_I2C_NOPROBES;
#define DISP_LINE_LEN 16
+/*
+ * Default for driver model is to use the chip's existing address length.
+ * For legacy code, this is not stored, so we need to use a suitable
+ * default.
+ */
+#ifdef CONFIG_DM_I2C
+#define DEFAULT_ADDR_LEN (-1)
+#else
+#define DEFAULT_ADDR_LEN 1
+#endif
+
+#ifdef CONFIG_DM_I2C
+static struct udevice *i2c_cur_bus;
+
+static int i2c_set_bus_num(unsigned int busnum)
+{
+ struct udevice *bus;
+ int ret;
+
+ ret = uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus);
+ if (ret) {
+ debug("%s: No bus %d\n", __func__, busnum);
+ return ret;
+ }
+ i2c_cur_bus = bus;
+
+ return 0;
+}
+
+static int i2c_get_cur_bus(struct udevice **busp)
+{
+ if (!i2c_cur_bus) {
+ puts("No I2C bus selected\n");
+ return -ENODEV;
+ }
+ *busp = i2c_cur_bus;
+
+ return 0;
+}
+
+static int i2c_get_cur_bus_chip(uint chip_addr, struct udevice **devp)
+{
+ struct udevice *bus;
+ int ret;
+
+ ret = i2c_get_cur_bus(&bus);
+ if (ret)
+ return ret;
+
+ return i2c_get_chip(bus, chip_addr, devp);
+}
+
+#endif
+
/**
* i2c_init_board() - Board-specific I2C bus init
*
@@ -143,7 +199,7 @@ void i2c_init_board(void)
*
* Returns I2C bus speed in Hz.
*/
-#if !defined(CONFIG_SYS_I2C)
+#if !defined(CONFIG_SYS_I2C) && !defined(CONFIG_DM_I2C)
/*
* TODO: Implement architecture-specific get/set functions
* Should go away, if we switched completely to new multibus support
@@ -182,12 +238,12 @@ int i2c_set_bus_speed(unsigned int speed)
*
* Returns the address length.
*/
-static uint get_alen(char *arg)
+static uint get_alen(char *arg, int default_len)
{
int j;
int alen;
- alen = 1;
+ alen = default_len;
for (j = 0; j < 8; j++) {
if (arg[j] == '.') {
alen = arg[j+1] - '0';
@@ -227,8 +283,13 @@ static int i2c_report_err(int ret, enum i2c_err_op op)
static int do_i2c_read ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
u_char chip;
- uint devaddr, alen, length;
+ uint devaddr, length;
+ int alen;
u_char *memaddr;
+ int ret;
+#ifdef CONFIG_DM_I2C
+ struct udevice *dev;
+#endif
if (argc != 5)
return CMD_RET_USAGE;
@@ -243,7 +304,7 @@ static int do_i2c_read ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv
* 2 bytes long. Some day it might be 3 bytes long :-).
*/
devaddr = simple_strtoul(argv[2], NULL, 16);
- alen = get_alen(argv[2]);
+ alen = get_alen(argv[2], DEFAULT_ADDR_LEN);
if (alen > 3)
return CMD_RET_USAGE;
@@ -257,18 +318,31 @@ static int do_i2c_read ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv
*/
memaddr = (u_char *)simple_strtoul(argv[4], NULL, 16);
- if (i2c_read(chip, devaddr, alen, memaddr, length) != 0) {
- i2c_report_err(-1, I2C_ERR_READ);
- return 1;
- }
+#ifdef CONFIG_DM_I2C
+ ret = i2c_get_cur_bus_chip(chip, &dev);
+ if (!ret && alen != -1)
+ ret = i2c_set_chip_offset_len(dev, alen);
+ if (!ret)
+ ret = i2c_read(dev, devaddr, memaddr, length);
+#else
+ ret = i2c_read(chip, devaddr, alen, memaddr, length);
+#endif
+ if (ret)
+ return i2c_report_err(ret, I2C_ERR_READ);
+
return 0;
}
static int do_i2c_write(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
u_char chip;
- uint devaddr, alen, length;
+ uint devaddr, length;
+ int alen;
u_char *memaddr;
+ int ret;
+#ifdef CONFIG_DM_I2C
+ struct udevice *dev;
+#endif
if (argc != 5)
return cmd_usage(cmdtp);
@@ -288,7 +362,7 @@ static int do_i2c_write(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[
* 2 bytes long. Some day it might be 3 bytes long :-).
*/
devaddr = simple_strtoul(argv[3], NULL, 16);
- alen = get_alen(argv[3]);
+ alen = get_alen(argv[3], DEFAULT_ADDR_LEN);
if (alen > 3)
return cmd_usage(cmdtp);
@@ -297,10 +371,22 @@ static int do_i2c_write(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[
*/
length = simple_strtoul(argv[4], NULL, 16);
+#ifdef CONFIG_DM_I2C
+ ret = i2c_get_cur_bus_chip(chip, &dev);
+ if (!ret && alen != -1)
+ ret = i2c_set_chip_offset_len(dev, alen);
+ if (ret)
+ return i2c_report_err(ret, I2C_ERR_WRITE);
+#endif
+
while (length-- > 0) {
- if (i2c_write(chip, devaddr++, alen, memaddr++, 1) != 0) {
- return i2c_report_err(-1, I2C_ERR_WRITE);
- }
+#ifdef CONFIG_DM_I2C
+ ret = i2c_write(dev, devaddr++, memaddr++, 1);
+#else
+ ret = i2c_write(chip, devaddr++, alen, memaddr++, 1);
+#endif
+ if (ret)
+ return i2c_report_err(ret, I2C_ERR_WRITE);
/*
* No write delay with FRAM devices.
*/
@@ -311,6 +397,38 @@ static int do_i2c_write(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[
return 0;
}
+#ifdef CONFIG_DM_I2C
+static int do_i2c_flags(cmd_tbl_t *cmdtp, int flag, int argc,
+ char *const argv[])
+{
+ struct udevice *dev;
+ uint flags;
+ int chip;
+ int ret;
+
+ if (argc < 2)
+ return CMD_RET_USAGE;
+
+ chip = simple_strtoul(argv[1], NULL, 16);
+ ret = i2c_get_cur_bus_chip(chip, &dev);
+ if (ret)
+ return i2c_report_err(ret, I2C_ERR_READ);
+
+ if (argc > 2) {
+ flags = simple_strtoul(argv[2], NULL, 16);
+ ret = i2c_set_chip_flags(dev, flags);
+ } else {
+ ret = i2c_get_chip_flags(dev, &flags);
+ if (!ret)
+ printf("%x\n", flags);
+ }
+ if (ret)
+ return i2c_report_err(ret, I2C_ERR_READ);
+
+ return 0;
+}
+#endif
+
/**
* do_i2c_md() - Handle the "i2c md" command-line command
* @cmdtp: Command data struct pointer
@@ -327,8 +445,13 @@ static int do_i2c_write(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[
static int do_i2c_md ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
u_char chip;
- uint addr, alen, length;
+ uint addr, length;
+ int alen;
int j, nbytes, linebytes;
+ int ret;
+#ifdef CONFIG_DM_I2C
+ struct udevice *dev;
+#endif
/* We use the last specified parameters, unless new ones are
* entered.
@@ -356,7 +479,7 @@ static int do_i2c_md ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]
* 2 bytes long. Some day it might be 3 bytes long :-).
*/
addr = simple_strtoul(argv[2], NULL, 16);
- alen = get_alen(argv[2]);
+ alen = get_alen(argv[2], DEFAULT_ADDR_LEN);
if (alen > 3)
return CMD_RET_USAGE;
@@ -368,6 +491,14 @@ static int do_i2c_md ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]
length = simple_strtoul(argv[3], NULL, 16);
}
+#ifdef CONFIG_DM_I2C
+ ret = i2c_get_cur_bus_chip(chip, &dev);
+ if (!ret && alen != -1)
+ ret = i2c_set_chip_offset_len(dev, alen);
+ if (ret)
+ return i2c_report_err(ret, I2C_ERR_READ);
+#endif
+
/*
* Print the lines.
*
@@ -381,8 +512,13 @@ static int do_i2c_md ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]
linebytes = (nbytes > DISP_LINE_LEN) ? DISP_LINE_LEN : nbytes;
- if (i2c_read(chip, addr, alen, linebuf, linebytes) != 0)
- i2c_report_err(-1, I2C_ERR_READ);
+#ifdef CONFIG_DM_I2C
+ ret = i2c_read(dev, addr, linebuf, linebytes);
+#else
+ ret = i2c_read(chip, addr, alen, linebuf, linebytes);
+#endif
+ if (ret)
+ i2c_report_err(ret, I2C_ERR_READ);
else {
printf("%04x:", addr);
cp = linebuf;
@@ -429,9 +565,13 @@ static int do_i2c_mw ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]
{
uchar chip;
ulong addr;
- uint alen;
+ int alen;
uchar byte;
int count;
+ int ret;
+#ifdef CONFIG_DM_I2C
+ struct udevice *dev;
+#endif
if ((argc < 4) || (argc > 5))
return CMD_RET_USAGE;
@@ -445,10 +585,17 @@ static int do_i2c_mw ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]
* Address is always specified.
*/
addr = simple_strtoul(argv[2], NULL, 16);
- alen = get_alen(argv[2]);
+ alen = get_alen(argv[2], DEFAULT_ADDR_LEN);
if (alen > 3)
return CMD_RET_USAGE;
+#ifdef CONFIG_DM_I2C
+ ret = i2c_get_cur_bus_chip(chip, &dev);
+ if (!ret && alen != -1)
+ ret = i2c_set_chip_offset_len(dev, alen);
+ if (ret)
+ return i2c_report_err(ret, I2C_ERR_WRITE);
+#endif
/*
* Value to write is always specified.
*/
@@ -463,8 +610,13 @@ static int do_i2c_mw ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]
count = 1;
while (count-- > 0) {
- if (i2c_write(chip, addr++, alen, &byte, 1) != 0)
- i2c_report_err(-1, I2C_ERR_WRITE);
+#ifdef CONFIG_DM_I2C
+ ret = i2c_write(dev, addr++, &byte, 1);
+#else
+ ret = i2c_write(chip, addr++, alen, &byte, 1);
+#endif
+ if (ret)
+ i2c_report_err(ret, I2C_ERR_WRITE);
/*
* Wait for the write to complete. The write can take
* up to 10mSec (we allow a little more time).
@@ -499,11 +651,15 @@ static int do_i2c_crc (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]
{
uchar chip;
ulong addr;
- uint alen;
+ int alen;
int count;
uchar byte;
ulong crc;
ulong err;
+ int ret = 0;
+#ifdef CONFIG_DM_I2C
+ struct udevice *dev;
+#endif
if (argc < 4)
return CMD_RET_USAGE;
@@ -517,10 +673,17 @@ static int do_i2c_crc (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]
* Address is always specified.
*/
addr = simple_strtoul(argv[2], NULL, 16);
- alen = get_alen(argv[2]);
+ alen = get_alen(argv[2], DEFAULT_ADDR_LEN);
if (alen > 3)
return CMD_RET_USAGE;
+#ifdef CONFIG_DM_I2C
+ ret = i2c_get_cur_bus_chip(chip, &dev);
+ if (!ret && alen != -1)
+ ret = i2c_set_chip_offset_len(dev, alen);
+ if (ret)
+ return i2c_report_err(ret, I2C_ERR_READ);
+#endif
/*
* Count is always specified
*/
@@ -534,13 +697,18 @@ static int do_i2c_crc (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]
crc = 0;
err = 0;
while (count-- > 0) {
- if (i2c_read(chip, addr, alen, &byte, 1) != 0)
+#ifdef CONFIG_DM_I2C
+ ret = i2c_read(dev, addr, &byte, 1);
+#else
+ ret = i2c_read(chip, addr, alen, &byte, 1);
+#endif
+ if (ret)
err++;
crc = crc32 (crc, &byte, 1);
addr++;
}
if (err > 0)
- i2c_report_err(-1, I2C_ERR_READ);
+ i2c_report_err(ret, I2C_ERR_READ);
else
printf ("%08lx\n", crc);
@@ -568,10 +736,14 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const arg
{
uchar chip;
ulong addr;
- uint alen;
+ int alen;
ulong data;
int size = 1;
int nbytes;
+ int ret;
+#ifdef CONFIG_DM_I2C
+ struct udevice *dev;
+#endif
if (argc != 3)
return CMD_RET_USAGE;
@@ -601,19 +773,32 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const arg
* Address is always specified.
*/
addr = simple_strtoul(argv[2], NULL, 16);
- alen = get_alen(argv[2]);
+ alen = get_alen(argv[2], DEFAULT_ADDR_LEN);
if (alen > 3)
return CMD_RET_USAGE;
}
+#ifdef CONFIG_DM_I2C
+ ret = i2c_get_cur_bus_chip(chip, &dev);
+ if (!ret && alen != -1)
+ ret = i2c_set_chip_offset_len(dev, alen);
+ if (ret)
+ return i2c_report_err(ret, I2C_ERR_WRITE);
+#endif
+
/*
* Print the address, followed by value. Then accept input for
* the next value. A non-converted value exits.
*/
do {
printf("%08lx:", addr);
- if (i2c_read(chip, addr, alen, (uchar *)&data, size) != 0)
- i2c_report_err(-1, I2C_ERR_READ);
+#ifdef CONFIG_DM_I2C
+ ret = i2c_read(dev, addr, (uchar *)&data, size);
+#else
+ ret = i2c_read(chip, addr, alen, (uchar *)&data, size);
+#endif
+ if (ret)
+ i2c_report_err(ret, I2C_ERR_READ);
else {
data = cpu_to_be32(data);
if (size == 1)
@@ -655,8 +840,15 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const arg
* good enough to not time out
*/
bootretry_reset_cmd_timeout();
- if (i2c_write(chip, addr, alen, (uchar *)&data, size) != 0)
- i2c_report_err(-1, I2C_ERR_WRITE);
+#ifdef CONFIG_DM_I2C
+ ret = i2c_write(dev, addr, (uchar *)&data,
+ size);
+#else
+ ret = i2c_write(chip, addr, alen,
+ (uchar *)&data, size);
+#endif
+ if (ret)
+ i2c_report_err(ret, I2C_ERR_WRITE);
#ifdef CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS
udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
#endif
@@ -697,6 +889,13 @@ static int do_i2c_probe (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv
int k, skip;
unsigned int bus = GET_BUS_NUM;
#endif /* NOPROBES */
+ int ret;
+#ifdef CONFIG_DM_I2C
+ struct udevice *bus, *dev;
+
+ if (i2c_get_cur_bus(&bus))
+ return CMD_RET_FAILURE;
+#endif
if (argc == 2)
addr = simple_strtol(argv[1], 0, 16);
@@ -717,7 +916,12 @@ static int do_i2c_probe (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv
if (skip)
continue;
#endif
- if (i2c_probe(j) == 0) {
+#ifdef CONFIG_DM_I2C
+ ret = i2c_probe(bus, j, 0, &dev);
+#else
+ ret = i2c_probe(j);
+#endif
+ if (ret == 0) {
printf(" %02X", j);
found++;
}
@@ -754,11 +958,15 @@ static int do_i2c_probe (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv
static int do_i2c_loop(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
u_char chip;
- ulong alen;
+ int alen;
uint addr;
uint length;
u_char bytes[16];
int delay;
+ int ret;
+#ifdef CONFIG_DM_I2C
+ struct udevice *dev;
+#endif
if (argc < 3)
return CMD_RET_USAGE;
@@ -772,9 +980,16 @@ static int do_i2c_loop(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]
* Address is always specified.
*/
addr = simple_strtoul(argv[2], NULL, 16);
- alen = get_alen(argv[2]);
+ alen = get_alen(argv[2], DEFAULT_ADDR_LEN);
if (alen > 3)
return CMD_RET_USAGE;
+#ifdef CONFIG_DM_I2C
+ ret = i2c_get_cur_bus_chip(chip, &dev);
+ if (!ret && alen != -1)
+ ret = i2c_set_chip_offset_len(dev, alen);
+ if (ret)
+ return i2c_report_err(ret, I2C_ERR_WRITE);
+#endif
/*
* Length is the number of objects, not number of bytes.
@@ -794,8 +1009,13 @@ static int do_i2c_loop(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]
* Run the loop...
*/
while (1) {
- if (i2c_read(chip, addr, alen, bytes, length) != 0)
- i2c_report_err(-1, I2C_ERR_READ);
+#ifdef CONFIG_DM_I2C
+ ret = i2c_read(dev, addr, bytes, length);
+#else
+ ret = i2c_read(chip, addr, alen, bytes, length);
+#endif
+ if (ret)
+ i2c_report_err(ret, I2C_ERR_READ);
udelay(delay);
}
@@ -1345,6 +1565,10 @@ int do_edid(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
{
u_char chip;
struct edid1_info edid;
+ int ret;
+#ifdef CONFIG_DM_I2C
+ struct udevice *dev;
+#endif
if (argc < 2) {
cmd_usage(cmdtp);
@@ -1352,10 +1576,15 @@ int do_edid(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
}
chip = simple_strtoul(argv[1], NULL, 16);
- if (i2c_read(chip, 0, 1, (uchar *)&edid, sizeof(edid)) != 0) {
- i2c_report_err(-1, I2C_ERR_READ);
- return 1;
- }
+#ifdef CONFIG_DM_I2C
+ ret = i2c_get_cur_bus_chip(chip, &dev);
+ if (!ret)
+ ret = i2c_read(dev, 0, (uchar *)&edid, sizeof(edid));
+#else
+ ret = i2c_read(chip, 0, 1, (uchar *)&edid, sizeof(edid));
+#endif
+ if (ret)
+ return i2c_report_err(ret, I2C_ERR_READ);
if (edid_check_info(&edid)) {
puts("Content isn't valid EDID.\n");
@@ -1437,17 +1666,28 @@ static int do_i2c_show_bus(cmd_tbl_t *cmdtp, int flag, int argc,
* Returns zero on success, CMD_RET_USAGE in case of misuse and negative
* on error.
*/
-#if defined(CONFIG_SYS_I2C) || defined(CONFIG_I2C_MULTI_BUS)
+#if defined(CONFIG_SYS_I2C) || defined(CONFIG_I2C_MULTI_BUS) || \
+ defined(CONFIG_DM_I2C)
static int do_i2c_bus_num(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[])
{
int ret = 0;
- unsigned int bus_no;
+ int bus_no;
- if (argc == 1)
+ if (argc == 1) {
/* querying current setting */
- printf("Current bus is %d\n", i2c_get_bus_num());
- else {
+#ifdef CONFIG_DM_I2C
+ struct udevice *bus;
+
+ if (!i2c_get_cur_bus(&bus))
+ bus_no = bus->seq;
+ else
+ bus_no = -1;
+#else
+ bus_no = i2c_get_bus_num();
+#endif
+ printf("Current bus is %d\n", bus_no);
+ } else {
bus_no = simple_strtoul(argv[1], NULL, 10);
#if defined(CONFIG_SYS_I2C)
if (bus_no >= CONFIG_SYS_NUM_I2C_BUSES) {
@@ -1478,13 +1718,28 @@ static int do_i2c_bus_speed(cmd_tbl_t * cmdtp, int flag, int argc, char * const
{
int speed, ret=0;
- if (argc == 1)
+#ifdef CONFIG_DM_I2C
+ struct udevice *bus;
+
+ if (i2c_get_cur_bus(&bus))
+ return 1;
+#endif
+ if (argc == 1) {
+#ifdef CONFIG_DM_I2C
+ speed = i2c_get_bus_speed(bus);
+#else
+ speed = i2c_get_bus_speed();
+#endif
/* querying current speed */
- printf("Current bus speed=%d\n", i2c_get_bus_speed());
- else {
+ printf("Current bus speed=%d\n", speed);
+ } else {
speed = simple_strtoul(argv[1], NULL, 10);
printf("Setting bus speed to %d Hz\n", speed);
+#ifdef CONFIG_DM_I2C
+ ret = i2c_set_bus_speed(bus, speed);
+#else
ret = i2c_set_bus_speed(speed);
+#endif
if (ret)
printf("Failure changing bus speed (%d)\n", ret);
}
@@ -1532,7 +1787,16 @@ static int do_i2c_nm(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
*/
static int do_i2c_reset(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
{
-#if defined(CONFIG_SYS_I2C)
+#if defined(CONFIG_DM_I2C)
+ struct udevice *bus;
+
+ if (i2c_get_cur_bus(&bus))
+ return CMD_RET_FAILURE;
+ if (i2c_deblock(bus)) {
+ printf("Error: Not supported by the driver\n");
+ return CMD_RET_FAILURE;
+ }
+#elif defined(CONFIG_SYS_I2C)
i2c_init(I2C_ADAP->speed, I2C_ADAP->slaveaddr);
#else
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
@@ -1546,7 +1810,7 @@ static cmd_tbl_t cmd_i2c_sub[] = {
#endif
U_BOOT_CMD_MKENT(crc32, 3, 1, do_i2c_crc, "", ""),
#if defined(CONFIG_SYS_I2C) || \
- defined(CONFIG_I2C_MULTI_BUS)
+ defined(CONFIG_I2C_MULTI_BUS) || defined(CONFIG_DM_I2C)
U_BOOT_CMD_MKENT(dev, 1, 1, do_i2c_bus_num, "", ""),
#endif /* CONFIG_I2C_MULTI_BUS */
#if defined(CONFIG_I2C_EDID)
@@ -1560,6 +1824,9 @@ static cmd_tbl_t cmd_i2c_sub[] = {
U_BOOT_CMD_MKENT(probe, 0, 1, do_i2c_probe, "", ""),
U_BOOT_CMD_MKENT(read, 5, 1, do_i2c_read, "", ""),
U_BOOT_CMD_MKENT(write, 5, 0, do_i2c_write, "", ""),
+#ifdef CONFIG_DM_I2C
+ U_BOOT_CMD_MKENT(flags, 2, 1, do_i2c_flags, "", ""),
+#endif
U_BOOT_CMD_MKENT(reset, 0, 1, do_i2c_reset, "", ""),
#if defined(CONFIG_CMD_SDRAM)
U_BOOT_CMD_MKENT(sdram, 1, 1, do_sdram, "", ""),
@@ -1610,7 +1877,7 @@ static char i2c_help_text[] =
#endif
"crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n"
#if defined(CONFIG_SYS_I2C) || \
- defined(CONFIG_I2C_MULTI_BUS)
+ defined(CONFIG_I2C_MULTI_BUS) || defined(CONFIG_DM_I2C)
"i2c dev [dev] - show or set current I2C bus\n"
#endif /* CONFIG_I2C_MULTI_BUS */
#if defined(CONFIG_I2C_EDID)
@@ -1622,8 +1889,11 @@ static char i2c_help_text[] =
"i2c mw chip address[.0, .1, .2] value [count] - write to I2C device (fill)\n"
"i2c nm chip address[.0, .1, .2] - write to I2C device (constant address)\n"
"i2c probe [address] - test for and show device(s) on the I2C bus\n"
- "i2c read chip address[.0, .1, .2] length memaddress - read to memory \n"
+ "i2c read chip address[.0, .1, .2] length memaddress - read to memory\n"
"i2c write memaddress chip address[.0, .1, .2] length - write memory to i2c\n"
+#ifdef CONFIG_DM_I2C
+ "i2c flags chip [flags] - set or get chip flags\n"
+#endif
"i2c reset - re-init the I2C Controller\n"
#if defined(CONFIG_CMD_SDRAM)
"i2c sdram chip - print SDRAM configuration information\n"
diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c
index 4286e26..96478e4 100644
--- a/common/cmd_mmc.c
+++ b/common/cmd_mmc.c
@@ -90,7 +90,8 @@ static void print_mmcinfo(struct mmc *mmc)
puts("Capacity: ");
print_size(mmc->capacity, "\n");
- printf("Bus Width: %d-bit\n", mmc->bus_width);
+ printf("Bus Width: %d-bit%s\n", mmc->bus_width,
+ mmc->ddr_mode ? " DDR" : "");
}
static struct mmc *init_mmc_device(int dev, bool force_init)
{
diff --git a/common/console.c b/common/console.c
index 4695386..29560c3 100644
--- a/common/console.c
+++ b/common/console.c
@@ -125,12 +125,12 @@ static int console_setfile(int file, struct stdio_dev * dev)
*/
switch (file) {
case stdin:
- gd->jt[XF_getc] = dev->getc;
- gd->jt[XF_tstc] = dev->tstc;
+ gd->jt[XF_getc] = getc;
+ gd->jt[XF_tstc] = tstc;
break;
case stdout:
- gd->jt[XF_putc] = dev->putc;
- gd->jt[XF_puts] = dev->puts;
+ gd->jt[XF_putc] = putc;
+ gd->jt[XF_puts] = puts;
gd->jt[XF_printf] = printf;
break;
}
diff --git a/common/image-fdt.c b/common/image-fdt.c
index 8db3ccb..e3f06cd 100644
--- a/common/image-fdt.c
+++ b/common/image-fdt.c
@@ -237,6 +237,7 @@ int boot_get_fdt(int flag, int argc, char * const argv[], uint8_t arch,
int fdt_noffset;
#endif
const char *select = NULL;
+ int ok_no_fdt = 0;
*of_flat_tree = NULL;
*of_size = 0;
@@ -309,7 +310,7 @@ int boot_get_fdt(int flag, int argc, char * const argv[], uint8_t arch,
fdt_addr);
fdt_hdr = image_get_fdt(fdt_addr);
if (!fdt_hdr)
- goto error;
+ goto no_fdt;
/*
* move image data to the load address,
@@ -379,7 +380,7 @@ int boot_get_fdt(int flag, int argc, char * const argv[], uint8_t arch,
break;
default:
puts("ERROR: Did not find a cmdline Flattened Device Tree\n");
- goto error;
+ goto no_fdt;
}
printf(" Booting using the fdt blob at %#08lx\n", fdt_addr);
@@ -413,11 +414,11 @@ int boot_get_fdt(int flag, int argc, char * const argv[], uint8_t arch,
}
} else {
debug("## No Flattened Device Tree\n");
- return 0;
+ goto no_fdt;
}
} else {
debug("## No Flattened Device Tree\n");
- return 0;
+ goto no_fdt;
}
*of_flat_tree = fdt_blob;
@@ -427,9 +428,15 @@ int boot_get_fdt(int flag, int argc, char * const argv[], uint8_t arch,
return 0;
+no_fdt:
+ ok_no_fdt = 1;
error:
*of_flat_tree = NULL;
*of_size = 0;
+ if (!select && ok_no_fdt) {
+ debug("Continuing to boot without FDT\n");
+ return 0;
+ }
return 1;
}
diff --git a/common/lcd.c b/common/lcd.c
index 28b3fe7..3ed504d 100644
--- a/common/lcd.c
+++ b/common/lcd.c
@@ -530,7 +530,7 @@ static int lcd_init(void *lcdbase)
lcd_ctrl_init(lcdbase);
/*
- * lcd_ctrl_init() of some drivers (i.e. bcm2835 on rpi_b) ignores
+ * lcd_ctrl_init() of some drivers (i.e. bcm2835 on rpi) ignores
* the 'lcdbase' argument and uses custom lcd base address
* by setting up gd->fb_base. Check for this condition and fixup
* 'lcd_base' address.
diff --git a/common/spl/spl_mmc.c b/common/spl/spl_mmc.c
index ee71f79..7bae16b 100644
--- a/common/spl/spl_mmc.c
+++ b/common/spl/spl_mmc.c
@@ -15,7 +15,7 @@
DECLARE_GLOBAL_DATA_PTR;
-static int mmc_load_image_raw(struct mmc *mmc, unsigned long sector)
+static int mmc_load_image_raw_sector(struct mmc *mmc, unsigned long sector)
{
unsigned long err;
u32 image_size_sectors;
@@ -51,6 +51,22 @@ end:
return (err == 0);
}
+#ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION
+static int mmc_load_image_raw_partition(struct mmc *mmc, int partition)
+{
+ disk_partition_t info;
+
+ if (get_partition_info(&mmc->block_dev, partition, &info)) {
+#ifdef CONFIG_SPL_LIBCOMMON_SUPPORT
+ printf("spl: partition error\n");
+#endif
+ return -1;
+ }
+
+ return mmc_load_image_raw_sector(mmc, info.start);
+}
+#endif
+
#ifdef CONFIG_SPL_OS_BOOT
static int mmc_load_image_raw_os(struct mmc *mmc)
{
@@ -64,7 +80,8 @@ static int mmc_load_image_raw_os(struct mmc *mmc)
return -1;
}
- return mmc_load_image_raw(mmc, CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR);
+ return mmc_load_image_raw_sector(mmc,
+ CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR);
}
#endif
@@ -98,18 +115,24 @@ void spl_mmc_load_image(void)
#ifdef CONFIG_SPL_OS_BOOT
if (spl_start_uboot() || mmc_load_image_raw_os(mmc))
#endif
- err = mmc_load_image_raw(mmc,
+#ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION
+ err = mmc_load_image_raw_partition(mmc,
+ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION);
+#else
+ err = mmc_load_image_raw_sector(mmc,
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR);
+#endif
#if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
- } else if (boot_mode == MMCSD_MODE_FS) {
+ }
+ if (err || boot_mode == MMCSD_MODE_FS) {
debug("boot mode - FS\n");
#ifdef CONFIG_SPL_FAT_SUPPORT
#ifdef CONFIG_SPL_OS_BOOT
if (spl_start_uboot() || spl_load_image_fat_os(&mmc->block_dev,
- CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION))
+ CONFIG_SYS_MMCSD_FS_BOOT_PARTITION))
#endif
err = spl_load_image_fat(&mmc->block_dev,
- CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION,
+ CONFIG_SYS_MMCSD_FS_BOOT_PARTITION,
CONFIG_SPL_FS_LOAD_PAYLOAD_NAME);
if(err)
#endif /* CONFIG_SPL_FAT_SUPPORT */
@@ -117,10 +140,10 @@ void spl_mmc_load_image(void)
#ifdef CONFIG_SPL_EXT_SUPPORT
#ifdef CONFIG_SPL_OS_BOOT
if (spl_start_uboot() || spl_load_image_ext_os(&mmc->block_dev,
- CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION))
+ CONFIG_SYS_MMCSD_FS_BOOT_PARTITION))
#endif
err = spl_load_image_ext(&mmc->block_dev,
- CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION,
+ CONFIG_SYS_MMCSD_FS_BOOT_PARTITION,
CONFIG_SPL_FS_LOAD_PAYLOAD_NAME);
#endif /* CONFIG_SPL_EXT_SUPPORT */
}
@@ -146,7 +169,7 @@ void spl_mmc_load_image(void)
#ifdef CONFIG_SPL_OS_BOOT
if (spl_start_uboot() || mmc_load_image_raw_os(mmc))
#endif
- err = mmc_load_image_raw(mmc,
+ err = mmc_load_image_raw_sector(mmc,
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR);
#endif
} else {
diff --git a/common/usb.c b/common/usb.c
index 7d33a0f..736cd9f 100644
--- a/common/usb.c
+++ b/common/usb.c
@@ -33,7 +33,6 @@
#include <linux/ctype.h>
#include <asm/byteorder.h>
#include <asm/unaligned.h>
-#include <compiler.h>
#include <errno.h>
#include <usb.h>
#ifdef CONFIG_4xx
diff --git a/configs/T1024QDS_D4_SECURE_BOOT_defconfig b/configs/T1024QDS_D4_SECURE_BOOT_defconfig
new file mode 100644
index 0000000..d86ae05
--- /dev/null
+++ b/configs/T1024QDS_D4_SECURE_BOOT_defconfig
@@ -0,0 +1,4 @@
+CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024,SYS_FSL_DDR4,SECURE_BOOT"
+CONFIG_PPC=y
+CONFIG_MPC85xx=y
+CONFIG_TARGET_T102XQDS=y
diff --git a/configs/T1024QDS_NAND_defconfig b/configs/T1024QDS_NAND_defconfig
new file mode 100644
index 0000000..acbbe43
--- /dev/null
+++ b/configs/T1024QDS_NAND_defconfig
@@ -0,0 +1,5 @@
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024,RAMBOOT_PBL,SPL_FSL_PBL,NAND"
++S:CONFIG_PPC=y
++S:CONFIG_MPC85xx=y
++S:CONFIG_TARGET_T102XQDS=y
diff --git a/configs/T1024QDS_SDCARD_defconfig b/configs/T1024QDS_SDCARD_defconfig
new file mode 100644
index 0000000..82c6e19
--- /dev/null
+++ b/configs/T1024QDS_SDCARD_defconfig
@@ -0,0 +1,5 @@
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD"
++S:CONFIG_PPC=y
++S:CONFIG_MPC85xx=y
++S:CONFIG_TARGET_T102XQDS=y
diff --git a/configs/T1024QDS_SECURE_BOOT_defconfig b/configs/T1024QDS_SECURE_BOOT_defconfig
new file mode 100644
index 0000000..b932619
--- /dev/null
+++ b/configs/T1024QDS_SECURE_BOOT_defconfig
@@ -0,0 +1,4 @@
+CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024,SECURE_BOOT"
+CONFIG_PPC=y
+CONFIG_MPC85xx=y
+CONFIG_TARGET_T102XQDS=y
diff --git a/configs/T1024QDS_SPIFLASH_defconfig b/configs/T1024QDS_SPIFLASH_defconfig
new file mode 100644
index 0000000..52aeac7
--- /dev/null
+++ b/configs/T1024QDS_SPIFLASH_defconfig
@@ -0,0 +1,5 @@
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH"
++S:CONFIG_PPC=y
++S:CONFIG_MPC85xx=y
++S:CONFIG_TARGET_T102XQDS=y
diff --git a/configs/T1024RDB_NAND_defconfig b/configs/T1024RDB_NAND_defconfig
new file mode 100644
index 0000000..73d14ab
--- /dev/null
+++ b/configs/T1024RDB_NAND_defconfig
@@ -0,0 +1,5 @@
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024,RAMBOOT_PBL,SPL_FSL_PBL,NAND"
++S:CONFIG_PPC=y
++S:CONFIG_MPC85xx=y
++S:CONFIG_TARGET_T102XRDB=y
diff --git a/configs/T1024RDB_SDCARD_defconfig b/configs/T1024RDB_SDCARD_defconfig
new file mode 100644
index 0000000..3599f1d
--- /dev/null
+++ b/configs/T1024RDB_SDCARD_defconfig
@@ -0,0 +1,5 @@
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD"
++S:CONFIG_PPC=y
++S:CONFIG_MPC85xx=y
++S:CONFIG_TARGET_T102XRDB=y
diff --git a/configs/T1024RDB_SECURE_BOOT_defconfig b/configs/T1024RDB_SECURE_BOOT_defconfig
new file mode 100644
index 0000000..8377260
--- /dev/null
+++ b/configs/T1024RDB_SECURE_BOOT_defconfig
@@ -0,0 +1,4 @@
+CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024,SECURE_BOOT"
+CONFIG_PPC=y
+CONFIG_MPC85xx=y
+CONFIG_TARGET_T102XRDB=y
diff --git a/configs/T1024RDB_SPIFLASH_defconfig b/configs/T1024RDB_SPIFLASH_defconfig
new file mode 100644
index 0000000..c8ea985
--- /dev/null
+++ b/configs/T1024RDB_SPIFLASH_defconfig
@@ -0,0 +1,5 @@
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH"
++S:CONFIG_PPC=y
++S:CONFIG_MPC85xx=y
++S:CONFIG_TARGET_T102XRDB=y
diff --git a/configs/T1024RDB_defconfig b/configs/T1024RDB_defconfig
new file mode 100644
index 0000000..e19e404
--- /dev/null
+++ b/configs/T1024RDB_defconfig
@@ -0,0 +1,4 @@
+CONFIG_SYS_EXTRA_OPTIONS="PPC_T1024"
+CONFIG_PPC=y
+CONFIG_MPC85xx=y
+CONFIG_TARGET_T102XRDB=y
diff --git a/configs/beagle_x15_defconfig b/configs/beagle_x15_defconfig
new file mode 100644
index 0000000..872ab63
--- /dev/null
+++ b/configs/beagle_x15_defconfig
@@ -0,0 +1,5 @@
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=3"
++S:CONFIG_ARM=y
++S:CONFIG_OMAP54XX=y
++S:CONFIG_TARGET_BEAGLE_X15=y
diff --git a/configs/hermes_defconfig b/configs/hermes_defconfig
deleted file mode 100644
index a923a61..0000000
--- a/configs/hermes_defconfig
+++ /dev/null
@@ -1,3 +0,0 @@
-CONFIG_PPC=y
-CONFIG_8xx=y
-CONFIG_TARGET_HERMES=y
diff --git a/configs/ls1021aqds_nand_defconfig b/configs/ls1021aqds_nand_defconfig
new file mode 100644
index 0000000..dad5274
--- /dev/null
+++ b/configs/ls1021aqds_nand_defconfig
@@ -0,0 +1,4 @@
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,NAND_BOOT"
++S:CONFIG_ARM=y
++S:CONFIG_TARGET_LS1021AQDS=y
diff --git a/configs/ls1021aqds_qspi_defconfig b/configs/ls1021aqds_qspi_defconfig
new file mode 100644
index 0000000..05ec8e6
--- /dev/null
+++ b/configs/ls1021aqds_qspi_defconfig
@@ -0,0 +1,3 @@
+CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT"
++S:CONFIG_ARM=y
++S:CONFIG_TARGET_LS1021AQDS=y
diff --git a/configs/ls1021aqds_sdcard_defconfig b/configs/ls1021aqds_sdcard_defconfig
new file mode 100644
index 0000000..e03c3b4
--- /dev/null
+++ b/configs/ls1021aqds_sdcard_defconfig
@@ -0,0 +1,4 @@
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT"
++S:CONFIG_ARM=y
++S:CONFIG_TARGET_LS1021AQDS=y
diff --git a/configs/ls1021atwr_qspi_defconfig b/configs/ls1021atwr_qspi_defconfig
new file mode 100644
index 0000000..611f6e8
--- /dev/null
+++ b/configs/ls1021atwr_qspi_defconfig
@@ -0,0 +1,3 @@
+CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT"
++S:CONFIG_ARM=y
++S:CONFIG_TARGET_LS1021ATWR=y
diff --git a/configs/ls1021atwr_sdcard_defconfig b/configs/ls1021atwr_sdcard_defconfig
new file mode 100644
index 0000000..0eb556a
--- /dev/null
+++ b/configs/ls1021atwr_sdcard_defconfig
@@ -0,0 +1,4 @@
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT"
++S:CONFIG_ARM=y
++S:CONFIG_TARGET_LS1021ATWR=y
diff --git a/configs/nyan-big_defconfig b/configs/nyan-big_defconfig
new file mode 100644
index 0000000..ec79b5b
--- /dev/null
+++ b/configs/nyan-big_defconfig
@@ -0,0 +1,5 @@
++S:CONFIG_ARM=y
++S:CONFIG_TEGRA=y
++S:CONFIG_TEGRA124=y
++S:CONFIG_TARGET_NYAN_BIG=y
+CONFIG_DEFAULT_DEVICE_TREE="tegra124-nyan-big"
diff --git a/configs/ph1_ld4_defconfig b/configs/ph1_ld4_defconfig
index de068e9..3155340 100644
--- a/configs/ph1_ld4_defconfig
+++ b/configs/ph1_ld4_defconfig
@@ -4,6 +4,7 @@ CONFIG_FIT_VERBOSE=y
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_UNIPHIER=y
+S:CONFIG_MACH_PH1_LD4=y
++S:CONFIG_DCC_MICRO_SUPPORT_CARD=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BDI=y
CONFIG_CMD_CONSOLE=y
diff --git a/configs/ph1_pro4_defconfig b/configs/ph1_pro4_defconfig
index f4ddf5f..7ea4e6e 100644
--- a/configs/ph1_pro4_defconfig
+++ b/configs/ph1_pro4_defconfig
@@ -4,6 +4,7 @@ CONFIG_FIT_VERBOSE=y
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_UNIPHIER=y
+S:CONFIG_MACH_PH1_PRO4=y
++S:CONFIG_DCC_MICRO_SUPPORT_CARD=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BDI=y
CONFIG_CMD_CONSOLE=y
diff --git a/configs/ph1_sld8_defconfig b/configs/ph1_sld8_defconfig
index ee14382..ddf210c 100644
--- a/configs/ph1_sld8_defconfig
+++ b/configs/ph1_sld8_defconfig
@@ -4,6 +4,7 @@ CONFIG_FIT_VERBOSE=y
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_UNIPHIER=y
+S:CONFIG_MACH_PH1_SLD8=y
++S:CONFIG_DCC_MICRO_SUPPORT_CARD=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_BDI=y
CONFIG_CMD_CONSOLE=y
diff --git a/configs/rpi_b_defconfig b/configs/rpi_b_defconfig
deleted file mode 100644
index 9a4705e..0000000
--- a/configs/rpi_b_defconfig
+++ /dev/null
@@ -1,2 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_RPI_B=y
diff --git a/configs/rpi_defconfig b/configs/rpi_defconfig
new file mode 100644
index 0000000..9379cf0
--- /dev/null
+++ b/configs/rpi_defconfig
@@ -0,0 +1,2 @@
+CONFIG_ARM=y
+CONFIG_TARGET_RPI=y
diff --git a/configs/stv0991_defconfig b/configs/stv0991_defconfig
new file mode 100644
index 0000000..a05e991
--- /dev/null
+++ b/configs/stv0991_defconfig
@@ -0,0 +1,3 @@
+CONFIG_SYS_EXTRA_OPTIONS="stv0991"
+CONFIG_ARM=y
+CONFIG_TARGET_STV0991=y
diff --git a/doc/README.clang b/doc/README.clang
index 52495d3..fe36909 100644
--- a/doc/README.clang
+++ b/doc/README.clang
@@ -28,7 +28,7 @@ sudo apt-get install clang
To compile U-Boot with clang on linux without IAS use e.g.:
export TRIPLET=arm-linux-gnueabi && export CROSS_COMPILE="$TRIPLET-"
-make HOSTCC=clang CC="clang -target $TRIPLET -mllvm -arm-use-movt=0 -no-integrated-as" rpi_b_defconfig
+make HOSTCC=clang CC="clang -target $TRIPLET -mllvm -arm-use-movt=0 -no-integrated-as" rpi_defconfig
make HOSTCC=clang CC="clang -target $TRIPLET -mllvm -arm-use-movt=0 -no-integrated-as" all V=1 -j8
FreeBSD 11 (Current):
@@ -42,7 +42,7 @@ ln -s /usr/local/bin/arm-gnueabi-freebsd-as /usr/bin/arm-freebsd-eabi-as
# The following commands compile U-Boot using the clang xdev toolchain.
# NOTE: CROSS_COMPILE and target differ on purpose!
export CROSS_COMPILE=arm-gnueabi-freebsd-
-gmake CC="clang -target arm-freebsd-eabi --sysroot /usr/arm-freebsd -no-integrated-as -mllvm -arm-use-movt=0" rpi_b_defconfig
+gmake CC="clang -target arm-freebsd-eabi --sysroot /usr/arm-freebsd -no-integrated-as -mllvm -arm-use-movt=0" rpi_defconfig
gmake CC="clang -target arm-freebsd-eabi --sysroot /usr/arm-freebsd -no-integrated-as -mllvm -arm-use-movt=0" -j8
Given that u-boot will default to gcc, above commands can be
diff --git a/doc/README.fsl-dpaa b/doc/README.fsl-dpaa
new file mode 100644
index 0000000..0d8d4f6
--- /dev/null
+++ b/doc/README.fsl-dpaa
@@ -0,0 +1,10 @@
+This file documents Freescale DPAA-specific options.
+
+FMan (Frame Manager)
+ - CONFIG_FSL_FM_10GEC_REGULAR_NOTATION
+ on SoCs earlier(e.g. T4240, T2080), the notation between 10GEC and MAC as below:
+ 10GEC1->MAC9, 10GEC2->MAC10, 10GEC3->MAC1, 10GEC4->MAC2
+ on SoCs later(e.g. T1024, etc), the notation between 10GEC and MAC as below:
+ 10GEC1->MAC1, 10GEC2->MAC2
+ so we introduce CONFIG_FSL_FM_10GEC_REGULAR_NOTATION to identify the new SoCs on
+ which 10GEC enumeration is consistent with MAC enumeration.
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 8ba6e0a..deb4af4 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -12,8 +12,9 @@ The list should be sorted in reverse chronological order.
Board Arch CPU Commit Removed Last known maintainer/contact
=================================================================================================
-PRS200 powerpc mpc5200 - -
-MCC200 powerpc mpc5200 - -
+hermes powerpc mpc8xx - - Wolfgang Denk <wd@denx.de>
+PRS200 powerpc mpc5200 ecfdcee 2014-11-12
+MCC200 powerpc mpc5200 ecfdcee 2014-11-12
TOP5200 powerpc mpc5200 d58a945 2014-10-28 Reinhard Meyer <reinhard.meyer@emk-elektronik.de>
TOP860 powerpc mpc860 d58a945 2014-10-28 Reinhard Meyer <reinhard.meyer@emk-elektronik.de>
TOP9000 arm at91sam9xeXXX d58a945 2014-10-28 Reinhard Meyer <reinhard.meyer@emk-elektronik.de>
diff --git a/doc/git-mailrc b/doc/git-mailrc
index ad22763..6c79a6d 100644
--- a/doc/git-mailrc
+++ b/doc/git-mailrc
@@ -14,6 +14,9 @@ alias aaribaud Albert Aribaud <albert.u.boot@aribaud.net>
alias abiessmann Andreas Bießmann <andreas.devel@googlemail.com>
alias afleming Andy Fleming <afleming@gmail.com>
alias ag Anatolij Gustschin <agust@denx.de>
+alias alisonwang Alison Wang <alison.wang@freescale.com>
+alias angelo_ts Angelo Dureghello <angelo@sysam.it>
+alias danielschwierzeck Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
alias galak Kumar Gala <galak@kernel.crashing.org>
alias gruss Graeme Russ <graeme.russ@gmail.com>
alias hs Heiko Schocher <hs@denx.de>
@@ -72,13 +75,13 @@ alias avr32 uboot, abiessmann
alias bfin uboot, vapier, sonic
alias blackfin bfin
-alias m68k uboot, jasonjin
+alias m68k uboot, alisonwang, angelo_ts
alias coldfire m68k
alias microblaze uboot, monstr
alias mb microblaze
-alias mips uboot, Shinya Kuribayashi <skuribay@pobox.com>
+alias mips uboot, danielschwierzeck
alias nds32 uboot, macpaul
@@ -119,6 +122,7 @@ alias mmc uboot, panto
alias nand uboot, scottwood
alias net uboot, jhersh
alias spi uboot, jagan
+alias ubi uboot, hs
alias usb uboot, marex
alias video uboot, ag
alias patman uboot, sjg
diff --git a/drivers/bios_emulator/besys.c b/drivers/bios_emulator/besys.c
index 752a928..02c4286 100644
--- a/drivers/bios_emulator/besys.c
+++ b/drivers/bios_emulator/besys.c
@@ -48,8 +48,8 @@
****************************************************************************/
#define __io
-#include <asm/io.h>
#include <common.h>
+#include <asm/io.h>
#include "biosemui.h"
/*------------------------- Global Variables ------------------------------*/
diff --git a/drivers/bios_emulator/bios.c b/drivers/bios_emulator/bios.c
index 152d70a..dd4c0a4 100644
--- a/drivers/bios_emulator/bios.c
+++ b/drivers/bios_emulator/bios.c
@@ -42,8 +42,8 @@
****************************************************************************/
#define __io
-#include <asm/io.h>
#include <common.h>
+#include <asm/io.h>
#include "biosemui.h"
/*----------------------------- Implementation ----------------------------*/
diff --git a/drivers/block/dwc_ahsata.c b/drivers/block/dwc_ahsata.c
index 9a2b547..01a4148 100644
--- a/drivers/block/dwc_ahsata.c
+++ b/drivers/block/dwc_ahsata.c
@@ -594,22 +594,24 @@ int init_sata(int dev)
int reset_sata(int dev)
{
- struct ahci_probe_ent *probe_ent =
- (struct ahci_probe_ent *)sata_dev_desc[dev].priv;
- struct sata_host_regs *host_mmio =
- (struct sata_host_regs *)probe_ent->mmio_base;
+ struct ahci_probe_ent *probe_ent;
+ struct sata_host_regs *host_mmio;
if (dev < 0 || dev > (CONFIG_SYS_SATA_MAX_DEVICE - 1)) {
printf("The sata index %d is out of ranges\n\r", dev);
return -1;
}
+ probe_ent = (struct ahci_probe_ent *)sata_dev_desc[dev].priv;
+ if (NULL == probe_ent)
+ /* not initialized, so nothing to reset */
+ return 0;
+
+ host_mmio = (struct sata_host_regs *)probe_ent->mmio_base;
setbits_le32(&host_mmio->ghc, SATA_HOST_GHC_HR);
while (readl(&host_mmio->ghc) & SATA_HOST_GHC_HR)
udelay(100);
- disable_sata_clock();
-
return 0;
}
diff --git a/drivers/block/pata_bfin.h b/drivers/block/pata_bfin.h
index 2093cf0..b678f60 100644
--- a/drivers/block/pata_bfin.h
+++ b/drivers/block/pata_bfin.h
@@ -43,7 +43,6 @@ struct ata_port {
#define DRV_NAME "pata-bfin"
#define DRV_VERSION "0.9"
-#define __iomem
#define ATA_REG_CTRL 0x0E
#define ATA_REG_ALTSTATUS ATA_REG_CTRL
diff --git a/drivers/core/device.c b/drivers/core/device.c
index 6793e1c..963b16f 100644
--- a/drivers/core/device.c
+++ b/drivers/core/device.c
@@ -234,7 +234,7 @@ int device_probe(struct udevice *dev)
void *dev_get_platdata(struct udevice *dev)
{
if (!dev) {
- dm_warn("%s: null device", __func__);
+ dm_warn("%s: null device\n", __func__);
return NULL;
}
@@ -244,7 +244,7 @@ void *dev_get_platdata(struct udevice *dev)
void *dev_get_priv(struct udevice *dev)
{
if (!dev) {
- dm_warn("%s: null device", __func__);
+ dm_warn("%s: null device\n", __func__);
return NULL;
}
@@ -254,7 +254,7 @@ void *dev_get_priv(struct udevice *dev)
void *dev_get_parentdata(struct udevice *dev)
{
if (!dev) {
- dm_warn("%s: null device", __func__);
+ dm_warn("%s: null device\n", __func__);
return NULL;
}
diff --git a/drivers/ddr/fsl/arm_ddr_gen3.c b/drivers/ddr/fsl/arm_ddr_gen3.c
index 59f2fd6..c139da6 100644
--- a/drivers/ddr/fsl/arm_ddr_gen3.c
+++ b/drivers/ddr/fsl/arm_ddr_gen3.c
@@ -92,7 +92,6 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
ddr_out32(&ddr->timing_cfg_0, regs->timing_cfg_0);
ddr_out32(&ddr->timing_cfg_1, regs->timing_cfg_1);
ddr_out32(&ddr->timing_cfg_2, regs->timing_cfg_2);
- ddr_out32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
ddr_out32(&ddr->sdram_mode, regs->ddr_sdram_mode);
ddr_out32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2);
ddr_out32(&ddr->sdram_mode_3, regs->ddr_sdram_mode_3);
@@ -105,9 +104,6 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
ddr_out32(&ddr->sdram_interval, regs->ddr_sdram_interval);
ddr_out32(&ddr->sdram_data_init, regs->ddr_data_init);
ddr_out32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
- ddr_out32(&ddr->init_addr, regs->ddr_init_addr);
- ddr_out32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
-
ddr_out32(&ddr->timing_cfg_4, regs->timing_cfg_4);
ddr_out32(&ddr->timing_cfg_5, regs->timing_cfg_5);
ddr_out32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl);
@@ -128,7 +124,24 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
ddr_out32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1);
ddr_out32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2);
ddr_out32(&ddr->ddr_cdr1, regs->ddr_cdr1);
- ddr_out32(&ddr->ddr_cdr2, regs->ddr_cdr2);
+#ifdef CONFIG_DEEP_SLEEP
+ if (is_warm_boot()) {
+ ddr_out32(&ddr->sdram_cfg_2,
+ regs->ddr_sdram_cfg_2 & ~SDRAM_CFG2_D_INIT);
+ ddr_out32(&ddr->init_addr, CONFIG_SYS_SDRAM_BASE);
+ ddr_out32(&ddr->init_ext_addr, DDR_INIT_ADDR_EXT_UIA);
+
+ /* DRAM VRef will not be trained */
+ ddr_out32(&ddr->ddr_cdr2,
+ regs->ddr_cdr2 & ~DDR_CDR2_VREF_TRAIN_EN);
+ } else
+#endif
+ {
+ ddr_out32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
+ ddr_out32(&ddr->init_addr, regs->ddr_init_addr);
+ ddr_out32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
+ ddr_out32(&ddr->ddr_cdr2, regs->ddr_cdr2);
+ }
ddr_out32(&ddr->err_disable, regs->err_disable);
ddr_out32(&ddr->err_int_en, regs->err_int_en);
for (i = 0; i < 32; i++) {
@@ -167,8 +180,20 @@ step2:
udelay(500);
asm volatile("dsb sy;isb");
+#ifdef CONFIG_DEEP_SLEEP
+ if (is_warm_boot()) {
+ /* enter self-refresh */
+ temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg_2);
+ temp_sdram_cfg |= SDRAM_CFG2_FRC_SR;
+ ddr_out32(&ddr->sdram_cfg_2, temp_sdram_cfg);
+ /* do board specific memory setup */
+ board_mem_sleep_setup();
+
+ temp_sdram_cfg = (ddr_in32(&ddr->sdram_cfg) | SDRAM_CFG_BI);
+ } else
+#endif
+ temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI;
/* Let the controller go */
- temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI;
ddr_out32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN);
asm volatile("dsb sy;isb");
@@ -211,4 +236,12 @@ step2:
if (timeout <= 0)
printf("Waiting for D_INIT timeout. Memory may not work.\n");
+#ifdef CONFIG_DEEP_SLEEP
+ if (is_warm_boot()) {
+ /* exit self-refresh */
+ temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg_2);
+ temp_sdram_cfg &= ~SDRAM_CFG2_FRC_SR;
+ ddr_out32(&ddr->sdram_cfg_2, temp_sdram_cfg);
+ }
+#endif
}
diff --git a/drivers/ddr/fsl/ctrl_regs.c b/drivers/ddr/fsl/ctrl_regs.c
index 9e2a4d2..fe8aa98 100644
--- a/drivers/ddr/fsl/ctrl_regs.c
+++ b/drivers/ddr/fsl/ctrl_regs.c
@@ -253,22 +253,30 @@ static void set_csn_config_2(int i, fsl_ddr_cfg_regs_t *ddr)
/* -3E = 667 CL5, -25 = CL6 800, -25E = CL5 800 */
#if !defined(CONFIG_SYS_FSL_DDR1)
+/*
+ * Check DIMM configuration, return 2 if quad-rank or two dual-rank
+ * Return 1 if other two slots configuration. Return 0 if single slot.
+ */
static inline int avoid_odt_overlap(const dimm_params_t *dimm_params)
{
#if CONFIG_DIMM_SLOTS_PER_CTLR == 1
if (dimm_params[0].n_ranks == 4)
- return 1;
+ return 2;
#endif
#if CONFIG_DIMM_SLOTS_PER_CTLR == 2
if ((dimm_params[0].n_ranks == 2) &&
(dimm_params[1].n_ranks == 2))
- return 1;
+ return 2;
#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
if (dimm_params[0].n_ranks == 4)
- return 1;
+ return 2;
#endif
+
+ if ((dimm_params[0].n_ranks != 0) &&
+ (dimm_params[2].n_ranks != 0))
+ return 1;
#endif
return 0;
}
@@ -316,6 +324,7 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr,
#elif defined(CONFIG_SYS_FSL_DDR3)
unsigned int data_rate = get_ddr_freq(0);
int txp;
+ int odt_overlap;
/*
* (tXARD and tXARDS). Empirical?
* The DDR3 spec has not tXARD,
@@ -331,13 +340,23 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr,
/* set the turnaround time */
/*
- * for single quad-rank DIMM and two dual-rank DIMMs
+ * for single quad-rank DIMM and two-slot DIMMs
* to avoid ODT overlap
*/
- if (avoid_odt_overlap(dimm_params)) {
+ odt_overlap = avoid_odt_overlap(dimm_params);
+ switch (odt_overlap) {
+ case 2:
twwt_mclk = 2;
trrt_mclk = 1;
+ break;
+ case 1:
+ twwt_mclk = 1;
+ trrt_mclk = 0;
+ break;
+ default:
+ break;
}
+
/* for faster clock, need more time for data setup */
trwt_mclk = (data_rate/1000000 > 1800) ? 2 : 1;
@@ -383,7 +402,7 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr,
);
debug("FSLDDR: timing_cfg_0 = 0x%08x\n", ddr->timing_cfg_0);
}
-#endif /* defined(CONFIG_SYS_FSL_DDR2) */
+#endif /* !defined(CONFIG_SYS_FSL_DDR1) */
/* DDR SDRAM Timing Configuration 3 (TIMING_CFG_3) */
static void set_timing_cfg_3(fsl_ddr_cfg_regs_t *ddr,
diff --git a/drivers/ddr/fsl/ddr4_dimm_params.c b/drivers/ddr/fsl/ddr4_dimm_params.c
index 2418dca..aaddc8f 100644
--- a/drivers/ddr/fsl/ddr4_dimm_params.c
+++ b/drivers/ddr/fsl/ddr4_dimm_params.c
@@ -126,6 +126,12 @@ ddr_compute_dimm_parameters(const generic_spd_eeprom_t *spd,
{
unsigned int retval;
int i;
+ const u8 udimm_rc_e_dq[18] = {
+ 0x0c, 0x2c, 0x15, 0x35, 0x15, 0x35, 0x0b, 0x2c, 0x15,
+ 0x35, 0x0b, 0x35, 0x0b, 0x2c, 0x0b, 0x35, 0x15, 0x36
+ };
+ int spd_error = 0;
+ u8 *ptr;
if (spd->mem_type) {
if (spd->mem_type != SPD_MEMTYPE_DDR4) {
@@ -179,6 +185,22 @@ ddr_compute_dimm_parameters(const generic_spd_eeprom_t *spd,
/* Unbuffered DIMMs */
if (spd->mod_section.unbuffered.addr_mapping & 0x1)
pdimm->mirrored_dimm = 1;
+ if ((spd->mod_section.unbuffered.mod_height & 0xe0) == 0 &&
+ (spd->mod_section.unbuffered.ref_raw_card == 0x04)) {
+ /* Fix SPD error found on DIMMs with raw card E0 */
+ for (i = 0; i < 18; i++) {
+ if (spd->mapping[i] == udimm_rc_e_dq[i])
+ continue;
+ spd_error = 1;
+ debug("SPD byte %d: 0x%x, should be 0x%x\n",
+ 60 + i, spd->mapping[i],
+ udimm_rc_e_dq[i]);
+ ptr = (u8 *)&spd->mapping[i];
+ *ptr = udimm_rc_e_dq[i];
+ }
+ if (spd_error)
+ puts("SPD DQ mapping error fixed\n");
+ }
break;
default:
diff --git a/drivers/ddr/fsl/fsl_ddr_gen4.c b/drivers/ddr/fsl/fsl_ddr_gen4.c
index e024db9..a3c01e7 100644
--- a/drivers/ddr/fsl/fsl_ddr_gen4.c
+++ b/drivers/ddr/fsl/fsl_ddr_gen4.c
@@ -103,7 +103,6 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
ddr_out32(&ddr->dq_map_1, regs->dq_map_1);
ddr_out32(&ddr->dq_map_2, regs->dq_map_2);
ddr_out32(&ddr->dq_map_3, regs->dq_map_3);
- ddr_out32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
ddr_out32(&ddr->sdram_cfg_3, regs->ddr_sdram_cfg_3);
ddr_out32(&ddr->sdram_mode, regs->ddr_sdram_mode);
ddr_out32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2);
@@ -124,8 +123,6 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
ddr_out32(&ddr->sdram_md_cntl, regs->ddr_sdram_md_cntl);
ddr_out32(&ddr->sdram_interval, regs->ddr_sdram_interval);
ddr_out32(&ddr->sdram_data_init, regs->ddr_data_init);
- ddr_out32(&ddr->init_addr, regs->ddr_init_addr);
- ddr_out32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
ddr_out32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl);
#ifndef CONFIG_SYS_FSL_DDR_EMU
/*
@@ -147,7 +144,24 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
ddr_out32(&ddr->ddr_sdram_rcw_5, regs->ddr_sdram_rcw_5);
ddr_out32(&ddr->ddr_sdram_rcw_6, regs->ddr_sdram_rcw_6);
ddr_out32(&ddr->ddr_cdr1, regs->ddr_cdr1);
- ddr_out32(&ddr->ddr_cdr2, regs->ddr_cdr2);
+#ifdef CONFIG_DEEP_SLEEP
+ if (is_warm_boot()) {
+ ddr_out32(&ddr->sdram_cfg_2,
+ regs->ddr_sdram_cfg_2 & ~SDRAM_CFG2_D_INIT);
+ ddr_out32(&ddr->init_addr, CONFIG_SYS_SDRAM_BASE);
+ ddr_out32(&ddr->init_ext_addr, DDR_INIT_ADDR_EXT_UIA);
+
+ /* DRAM VRef will not be trained */
+ ddr_out32(&ddr->ddr_cdr2,
+ regs->ddr_cdr2 & ~DDR_CDR2_VREF_TRAIN_EN);
+ } else
+#endif
+ {
+ ddr_out32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
+ ddr_out32(&ddr->init_addr, regs->ddr_init_addr);
+ ddr_out32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
+ ddr_out32(&ddr->ddr_cdr2, regs->ddr_cdr2);
+ }
ddr_out32(&ddr->err_disable, regs->err_disable);
ddr_out32(&ddr->err_int_en, regs->err_int_en);
for (i = 0; i < 32; i++) {
@@ -187,8 +201,20 @@ step2:
mb();
isb();
+#ifdef CONFIG_DEEP_SLEEP
+ if (is_warm_boot()) {
+ /* enter self-refresh */
+ temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg_2);
+ temp_sdram_cfg |= SDRAM_CFG2_FRC_SR;
+ ddr_out32(&ddr->sdram_cfg_2, temp_sdram_cfg);
+ /* do board specific memory setup */
+ board_mem_sleep_setup();
+
+ temp_sdram_cfg = (ddr_in32(&ddr->sdram_cfg) | SDRAM_CFG_BI);
+ } else
+#endif
+ temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI;
/* Let the controller go */
- temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI;
ddr_out32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN);
mb();
isb();
@@ -233,4 +259,12 @@ step2:
if (timeout <= 0)
printf("Waiting for D_INIT timeout. Memory may not work.\n");
+#ifdef CONFIG_DEEP_SLEEP
+ if (is_warm_boot()) {
+ /* exit self-refresh */
+ temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg_2);
+ temp_sdram_cfg &= ~SDRAM_CFG2_FRC_SR;
+ ddr_out32(&ddr->sdram_cfg_2, temp_sdram_cfg);
+ }
+#endif
}
diff --git a/drivers/ddr/fsl/mpc85xx_ddr_gen3.c b/drivers/ddr/fsl/mpc85xx_ddr_gen3.c
index 4d5572e..8f4d01a 100644
--- a/drivers/ddr/fsl/mpc85xx_ddr_gen3.c
+++ b/drivers/ddr/fsl/mpc85xx_ddr_gen3.c
@@ -15,8 +15,6 @@
#error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL
#endif
-DECLARE_GLOBAL_DATA_PTR;
-
/*
* regs has the to-be-set values for DDR controller registers
* ctrl_num is the DDR controller number
@@ -44,16 +42,6 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
u32 save1, save2;
#endif
-#ifdef CONFIG_DEEP_SLEEP
- const ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- bool sleep_flag = 0;
-#endif
-
-#ifdef CONFIG_DEEP_SLEEP
- if (in_be32(&gur->scrtsr[0]) & (1 << 3))
- sleep_flag = 1;
-#endif
-
switch (ctrl_num) {
case 0:
ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;
@@ -130,13 +118,6 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
out_be32(&ddr->timing_cfg_0, regs->timing_cfg_0);
out_be32(&ddr->timing_cfg_1, regs->timing_cfg_1);
out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2);
-#ifdef CONFIG_DEEP_SLEEP
- if (sleep_flag)
- out_be32(&ddr->sdram_cfg_2,
- regs->ddr_sdram_cfg_2 & ~SDRAM_CFG2_D_INIT);
- else
-#endif
- out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode);
out_be32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2);
out_be32(&ddr->sdram_mode_3, regs->ddr_sdram_mode_3);
@@ -149,17 +130,6 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
out_be32(&ddr->sdram_data_init, regs->ddr_data_init);
out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
-#ifdef CONFIG_DEEP_SLEEP
- if (sleep_flag) {
- out_be32(&ddr->init_addr, 0);
- out_be32(&ddr->init_ext_addr, (1 << 31));
- } else
-#endif
- {
- out_be32(&ddr->init_addr, regs->ddr_init_addr);
- out_be32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
- }
-
out_be32(&ddr->timing_cfg_4, regs->timing_cfg_4);
out_be32(&ddr->timing_cfg_5, regs->timing_cfg_5);
out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl);
@@ -180,7 +150,24 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
out_be32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1);
out_be32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2);
out_be32(&ddr->ddr_cdr1, regs->ddr_cdr1);
- out_be32(&ddr->ddr_cdr2, regs->ddr_cdr2);
+#ifdef CONFIG_DEEP_SLEEP
+ if (is_warm_boot()) {
+ out_be32(&ddr->sdram_cfg_2,
+ regs->ddr_sdram_cfg_2 & ~SDRAM_CFG2_D_INIT);
+ out_be32(&ddr->init_addr, CONFIG_SYS_SDRAM_BASE);
+ out_be32(&ddr->init_ext_addr, DDR_INIT_ADDR_EXT_UIA);
+
+ /* DRAM VRef will not be trained */
+ out_be32(&ddr->ddr_cdr2,
+ regs->ddr_cdr2 & ~DDR_CDR2_VREF_TRAIN_EN);
+ } else
+#endif
+ {
+ out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
+ out_be32(&ddr->init_addr, regs->ddr_init_addr);
+ out_be32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
+ out_be32(&ddr->ddr_cdr2, regs->ddr_cdr2);
+ }
out_be32(&ddr->err_disable, regs->err_disable);
out_be32(&ddr->err_int_en, regs->err_int_en);
for (i = 0; i < 32; i++) {
@@ -400,21 +387,17 @@ step2:
asm volatile("sync;isync");
#ifdef CONFIG_DEEP_SLEEP
- if (sleep_flag) {
+ if (is_warm_boot()) {
/* enter self-refresh */
- setbits_be32(&ddr->sdram_cfg_2, (1 << 31));
+ setbits_be32(&ddr->sdram_cfg_2, SDRAM_CFG2_FRC_SR);
/* do board specific memory setup */
board_mem_sleep_setup();
- }
-#endif
-
- /* Let the controller go */
-#ifdef CONFIG_DEEP_SLEEP
- if (sleep_flag)
temp_sdram_cfg = (in_be32(&ddr->sdram_cfg) | SDRAM_CFG_BI);
- else
+ } else
#endif
temp_sdram_cfg = (in_be32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI);
+
+ /* Let the controller go */
out_be32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN);
asm volatile("sync;isync");
@@ -566,8 +549,8 @@ step2:
}
#endif /* CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 */
#ifdef CONFIG_DEEP_SLEEP
- if (sleep_flag)
+ if (is_warm_boot())
/* exit self-refresh */
- clrbits_be32(&ddr->sdram_cfg_2, (1 << 31));
+ clrbits_be32(&ddr->sdram_cfg_2, SDRAM_CFG2_FRC_SR);
#endif
}
diff --git a/drivers/dfu/dfu.c b/drivers/dfu/dfu.c
index c0aba6e..14cb366 100644
--- a/drivers/dfu/dfu.c
+++ b/drivers/dfu/dfu.c
@@ -544,10 +544,35 @@ struct dfu_entity *dfu_get_entity(int alt)
int dfu_get_alt(char *name)
{
struct dfu_entity *dfu;
+ char *str;
list_for_each_entry(dfu, &dfu_list, list) {
- if (!strncmp(dfu->name, name, strlen(dfu->name)))
- return dfu->alt;
+ if (dfu->name[0] != '/') {
+ if (!strncmp(dfu->name, name, strlen(dfu->name)))
+ return dfu->alt;
+ } else {
+ /*
+ * One must also consider absolute path
+ * (/boot/bin/uImage) available at dfu->name when
+ * compared "plain" file name (uImage)
+ *
+ * It is the case for e.g. thor gadget where lthor SW
+ * sends only the file name, so only the very last part
+ * of path must be checked for equality
+ */
+
+ str = strstr(dfu->name, name);
+ if (!str)
+ continue;
+
+ /*
+ * Check if matching substring is the last element of
+ * dfu->name (uImage)
+ */
+ if (strlen(dfu->name) ==
+ ((str - dfu->name) + strlen(name)))
+ return dfu->alt;
+ }
}
return -ENODEV;
diff --git a/drivers/gpio/intel_ich6_gpio.c b/drivers/gpio/intel_ich6_gpio.c
index b095d17..3433216 100644
--- a/drivers/gpio/intel_ich6_gpio.c
+++ b/drivers/gpio/intel_ich6_gpio.c
@@ -34,16 +34,9 @@
#include <asm/gpio.h>
#include <asm/io.h>
#include <asm/pci.h>
-#ifdef CONFIG_X86_RESET_VECTOR
-#include <asm/arch/pch.h>
-#define SUPPORT_GPIO_SETUP
-#endif
#define GPIO_PER_BANK 32
-/* Where in config space is the register that points to the GPIO registers? */
-#define PCI_CFG_GPIOBASE 0x48
-
struct ich6_bank_priv {
/* These are I/O addresses */
uint32_t use_sel;
@@ -51,52 +44,11 @@ struct ich6_bank_priv {
uint32_t lvl;
};
-#ifdef SUPPORT_GPIO_SETUP
-static void setup_pch_gpios(const struct pch_gpio_map *gpio)
-{
- u16 gpiobase = pci_read_config16(PCH_LPC_DEV, GPIO_BASE) & 0xfffc;
-
- /* GPIO Set 1 */
- if (gpio->set1.level)
- outl(*((u32 *)gpio->set1.level), gpiobase + GP_LVL);
- if (gpio->set1.mode)
- outl(*((u32 *)gpio->set1.mode), gpiobase + GPIO_USE_SEL);
- if (gpio->set1.direction)
- outl(*((u32 *)gpio->set1.direction), gpiobase + GP_IO_SEL);
- if (gpio->set1.reset)
- outl(*((u32 *)gpio->set1.reset), gpiobase + GP_RST_SEL1);
- if (gpio->set1.invert)
- outl(*((u32 *)gpio->set1.invert), gpiobase + GPI_INV);
- if (gpio->set1.blink)
- outl(*((u32 *)gpio->set1.blink), gpiobase + GPO_BLINK);
-
- /* GPIO Set 2 */
- if (gpio->set2.level)
- outl(*((u32 *)gpio->set2.level), gpiobase + GP_LVL2);
- if (gpio->set2.mode)
- outl(*((u32 *)gpio->set2.mode), gpiobase + GPIO_USE_SEL2);
- if (gpio->set2.direction)
- outl(*((u32 *)gpio->set2.direction), gpiobase + GP_IO_SEL2);
- if (gpio->set2.reset)
- outl(*((u32 *)gpio->set2.reset), gpiobase + GP_RST_SEL2);
-
- /* GPIO Set 3 */
- if (gpio->set3.level)
- outl(*((u32 *)gpio->set3.level), gpiobase + GP_LVL3);
- if (gpio->set3.mode)
- outl(*((u32 *)gpio->set3.mode), gpiobase + GPIO_USE_SEL3);
- if (gpio->set3.direction)
- outl(*((u32 *)gpio->set3.direction), gpiobase + GP_IO_SEL3);
- if (gpio->set3.reset)
- outl(*((u32 *)gpio->set3.reset), gpiobase + GP_RST_SEL3);
-}
-
/* TODO: Move this to device tree, or platform data */
void ich_gpio_set_gpio_map(const struct pch_gpio_map *map)
{
gd->arch.gpio_map = map;
}
-#endif /* SUPPORT_GPIO_SETUP */
static int gpio_ich6_ofdata_to_platdata(struct udevice *dev)
{
@@ -198,12 +150,11 @@ static int ich6_gpio_probe(struct udevice *dev)
struct gpio_dev_priv *uc_priv = dev->uclass_priv;
struct ich6_bank_priv *bank = dev_get_priv(dev);
-#ifdef SUPPORT_GPIO_SETUP
if (gd->arch.gpio_map) {
- setup_pch_gpios(gd->arch.gpio_map);
+ setup_pch_gpios(plat->base_addr, gd->arch.gpio_map);
gd->arch.gpio_map = NULL;
}
-#endif
+
uc_priv->gpio_count = GPIO_PER_BANK;
uc_priv->bank_name = plat->bank_name;
bank->use_sel = plat->base_addr;
@@ -251,6 +202,8 @@ static int ich6_gpio_direction_output(struct udevice *dev, unsigned offset,
struct ich6_bank_priv *bank = dev_get_priv(dev);
u32 tmplong;
+ gpio_set_value(offset, value);
+
tmplong = inl(bank->io_sel);
tmplong &= ~(1UL << offset);
outl(bank->io_sel, tmplong);
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index dae3d71..6f3c86c 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -4,6 +4,7 @@
#
# SPDX-License-Identifier: GPL-2.0+
#
+obj-$(CONFIG_DM_I2C) += i2c-uclass.o
obj-$(CONFIG_SYS_I2C_ADI) += adi_i2c.o
obj-$(CONFIG_I2C_MV) += mv_i2c.o
@@ -26,6 +27,7 @@ obj-$(CONFIG_SYS_I2C_OMAP34XX) += omap24xx_i2c.o
obj-$(CONFIG_SYS_I2C_PPC4XX) += ppc4xx_i2c.o
obj-$(CONFIG_SYS_I2C_RCAR) += rcar_i2c.o
obj-$(CONFIG_SYS_I2C_S3C24X0) += s3c24x0_i2c.o
+obj-$(CONFIG_SYS_I2C_SANDBOX) += sandbox_i2c.o i2c-emul-uclass.o
obj-$(CONFIG_SYS_I2C_SH) += sh_i2c.o
obj-$(CONFIG_SYS_I2C_SOFT) += soft_i2c.o
obj-$(CONFIG_SYS_I2C_TEGRA) += tegra_i2c.o
diff --git a/drivers/i2c/i2c-emul-uclass.c b/drivers/i2c/i2c-emul-uclass.c
new file mode 100644
index 0000000..aa89f95
--- /dev/null
+++ b/drivers/i2c/i2c-emul-uclass.c
@@ -0,0 +1,14 @@
+/*
+ * Copyright (c) 2014 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <i2c.h>
+
+UCLASS_DRIVER(i2c_emul) = {
+ .id = UCLASS_I2C_EMUL,
+ .name = "i2c_emul",
+};
diff --git a/drivers/i2c/i2c-uclass.c b/drivers/i2c/i2c-uclass.c
new file mode 100644
index 0000000..005bf86
--- /dev/null
+++ b/drivers/i2c/i2c-uclass.c
@@ -0,0 +1,466 @@
+/*
+ * Copyright (c) 2014 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <i2c.h>
+#include <malloc.h>
+#include <dm/device-internal.h>
+#include <dm/lists.h>
+#include <dm/root.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define I2C_MAX_OFFSET_LEN 4
+
+/**
+ * i2c_setup_offset() - Set up a new message with a chip offset
+ *
+ * @chip: Chip to use
+ * @offset: Byte offset within chip
+ * @offset_buf: Place to put byte offset
+ * @msg: Message buffer
+ * @return 0 if OK, -EADDRNOTAVAIL if the offset length is 0. In that case the
+ * message is still set up but will not contain an offset.
+ */
+static int i2c_setup_offset(struct dm_i2c_chip *chip, uint offset,
+ uint8_t offset_buf[], struct i2c_msg *msg)
+{
+ int offset_len;
+
+ msg->addr = chip->chip_addr;
+ msg->flags = chip->flags & DM_I2C_CHIP_10BIT ? I2C_M_TEN : 0;
+ msg->len = chip->offset_len;
+ msg->buf = offset_buf;
+ if (!chip->offset_len)
+ return -EADDRNOTAVAIL;
+ assert(chip->offset_len <= I2C_MAX_OFFSET_LEN);
+ offset_len = chip->offset_len;
+ while (offset_len--)
+ *offset_buf++ = offset >> (8 * offset_len);
+
+ return 0;
+}
+
+static int i2c_read_bytewise(struct udevice *dev, uint offset,
+ uint8_t *buffer, int len)
+{
+ struct dm_i2c_chip *chip = dev_get_parentdata(dev);
+ struct udevice *bus = dev_get_parent(dev);
+ struct dm_i2c_ops *ops = i2c_get_ops(bus);
+ struct i2c_msg msg[2], *ptr;
+ uint8_t offset_buf[I2C_MAX_OFFSET_LEN];
+ int ret;
+ int i;
+
+ for (i = 0; i < len; i++) {
+ if (i2c_setup_offset(chip, offset + i, offset_buf, msg))
+ return -EINVAL;
+ ptr = msg + 1;
+ ptr->addr = chip->chip_addr;
+ ptr->flags = msg->flags | I2C_M_RD;
+ ptr->len = 1;
+ ptr->buf = &buffer[i];
+ ptr++;
+
+ ret = ops->xfer(bus, msg, ptr - msg);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int i2c_write_bytewise(struct udevice *dev, uint offset,
+ const uint8_t *buffer, int len)
+{
+ struct dm_i2c_chip *chip = dev_get_parentdata(dev);
+ struct udevice *bus = dev_get_parent(dev);
+ struct dm_i2c_ops *ops = i2c_get_ops(bus);
+ struct i2c_msg msg[1];
+ uint8_t buf[I2C_MAX_OFFSET_LEN + 1];
+ int ret;
+ int i;
+
+ for (i = 0; i < len; i++) {
+ if (i2c_setup_offset(chip, offset + i, buf, msg))
+ return -EINVAL;
+ buf[msg->len++] = buffer[i];
+
+ ret = ops->xfer(bus, msg, 1);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+int i2c_read(struct udevice *dev, uint offset, uint8_t *buffer, int len)
+{
+ struct dm_i2c_chip *chip = dev_get_parentdata(dev);
+ struct udevice *bus = dev_get_parent(dev);
+ struct dm_i2c_ops *ops = i2c_get_ops(bus);
+ struct i2c_msg msg[2], *ptr;
+ uint8_t offset_buf[I2C_MAX_OFFSET_LEN];
+ int msg_count;
+
+ if (!ops->xfer)
+ return -ENOSYS;
+ if (chip->flags & DM_I2C_CHIP_RD_ADDRESS)
+ return i2c_read_bytewise(dev, offset, buffer, len);
+ ptr = msg;
+ if (!i2c_setup_offset(chip, offset, offset_buf, ptr))
+ ptr++;
+
+ if (len) {
+ ptr->addr = chip->chip_addr;
+ ptr->flags = chip->flags & DM_I2C_CHIP_10BIT ? I2C_M_TEN : 0;
+ ptr->flags |= I2C_M_RD;
+ ptr->len = len;
+ ptr->buf = buffer;
+ ptr++;
+ }
+ msg_count = ptr - msg;
+
+ return ops->xfer(bus, msg, msg_count);
+}
+
+int i2c_write(struct udevice *dev, uint offset, const uint8_t *buffer, int len)
+{
+ struct dm_i2c_chip *chip = dev_get_parentdata(dev);
+ struct udevice *bus = dev_get_parent(dev);
+ struct dm_i2c_ops *ops = i2c_get_ops(bus);
+ struct i2c_msg msg[1];
+
+ if (!ops->xfer)
+ return -ENOSYS;
+
+ if (chip->flags & DM_I2C_CHIP_WR_ADDRESS)
+ return i2c_write_bytewise(dev, offset, buffer, len);
+ /*
+ * The simple approach would be to send two messages here: one to
+ * set the offset and one to write the bytes. However some drivers
+ * will not be expecting this, and some chips won't like how the
+ * driver presents this on the I2C bus.
+ *
+ * The API does not support separate offset and data. We could extend
+ * it with a flag indicating that there is data in the next message
+ * that needs to be processed in the same transaction. We could
+ * instead add an additional buffer to each message. For now, handle
+ * this in the uclass since it isn't clear what the impact on drivers
+ * would be with this extra complication. Unfortunately this means
+ * copying the message.
+ *
+ * Use the stack for small messages, malloc() for larger ones. We
+ * need to allow space for the offset (up to 4 bytes) and the message
+ * itself.
+ */
+ if (len < 64) {
+ uint8_t buf[I2C_MAX_OFFSET_LEN + len];
+
+ i2c_setup_offset(chip, offset, buf, msg);
+ msg->len += len;
+ memcpy(buf + chip->offset_len, buffer, len);
+
+ return ops->xfer(bus, msg, 1);
+ } else {
+ uint8_t *buf;
+ int ret;
+
+ buf = malloc(I2C_MAX_OFFSET_LEN + len);
+ if (!buf)
+ return -ENOMEM;
+ i2c_setup_offset(chip, offset, buf, msg);
+ msg->len += len;
+ memcpy(buf + chip->offset_len, buffer, len);
+
+ ret = ops->xfer(bus, msg, 1);
+ free(buf);
+ return ret;
+ }
+}
+
+/**
+ * i2c_probe_chip() - probe for a chip on a bus
+ *
+ * @bus: Bus to probe
+ * @chip_addr: Chip address to probe
+ * @flags: Flags for the chip
+ * @return 0 if found, -ENOSYS if the driver is invalid, -EREMOTEIO if the chip
+ * does not respond to probe
+ */
+static int i2c_probe_chip(struct udevice *bus, uint chip_addr,
+ enum dm_i2c_chip_flags chip_flags)
+{
+ struct dm_i2c_ops *ops = i2c_get_ops(bus);
+ struct i2c_msg msg[1];
+ int ret;
+
+ if (ops->probe_chip) {
+ ret = ops->probe_chip(bus, chip_addr, chip_flags);
+ if (!ret || ret != -ENOSYS)
+ return ret;
+ }
+
+ if (!ops->xfer)
+ return -ENOSYS;
+
+ /* Probe with a zero-length message */
+ msg->addr = chip_addr;
+ msg->flags = chip_flags & DM_I2C_CHIP_10BIT ? I2C_M_TEN : 0;
+ msg->len = 0;
+ msg->buf = NULL;
+
+ return ops->xfer(bus, msg, 1);
+}
+
+static int i2c_bind_driver(struct udevice *bus, uint chip_addr,
+ struct udevice **devp)
+{
+ struct dm_i2c_chip chip;
+ char name[30], *str;
+ struct udevice *dev;
+ int ret;
+
+ snprintf(name, sizeof(name), "generic_%x", chip_addr);
+ str = strdup(name);
+ ret = device_bind_driver(bus, "i2c_generic_chip_drv", str, &dev);
+ debug("%s: device_bind_driver: ret=%d\n", __func__, ret);
+ if (ret)
+ goto err_bind;
+
+ /* Tell the device what we know about it */
+ memset(&chip, '\0', sizeof(chip));
+ chip.chip_addr = chip_addr;
+ chip.offset_len = 1; /* we assume */
+ ret = device_probe_child(dev, &chip);
+ debug("%s: device_probe_child: ret=%d\n", __func__, ret);
+ if (ret)
+ goto err_probe;
+
+ *devp = dev;
+ return 0;
+
+err_probe:
+ device_unbind(dev);
+err_bind:
+ free(str);
+ return ret;
+}
+
+int i2c_get_chip(struct udevice *bus, uint chip_addr, struct udevice **devp)
+{
+ struct udevice *dev;
+
+ debug("%s: Searching bus '%s' for address %02x: ", __func__,
+ bus->name, chip_addr);
+ for (device_find_first_child(bus, &dev); dev;
+ device_find_next_child(&dev)) {
+ struct dm_i2c_chip store;
+ struct dm_i2c_chip *chip = dev_get_parentdata(dev);
+ int ret;
+
+ if (!chip) {
+ chip = &store;
+ i2c_chip_ofdata_to_platdata(gd->fdt_blob,
+ dev->of_offset, chip);
+ }
+ if (chip->chip_addr == chip_addr) {
+ ret = device_probe(dev);
+ debug("found, ret=%d\n", ret);
+ if (ret)
+ return ret;
+ *devp = dev;
+ return 0;
+ }
+ }
+ debug("not found\n");
+ return i2c_bind_driver(bus, chip_addr, devp);
+}
+
+int i2c_get_chip_for_busnum(int busnum, int chip_addr, struct udevice **devp)
+{
+ struct udevice *bus;
+ int ret;
+
+ ret = uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus);
+ if (ret) {
+ debug("Cannot find I2C bus %d\n", busnum);
+ return ret;
+ }
+ ret = i2c_get_chip(bus, chip_addr, devp);
+ if (ret) {
+ debug("Cannot find I2C chip %02x on bus %d\n", chip_addr,
+ busnum);
+ return ret;
+ }
+
+ return 0;
+}
+
+int i2c_probe(struct udevice *bus, uint chip_addr, uint chip_flags,
+ struct udevice **devp)
+{
+ int ret;
+
+ *devp = NULL;
+
+ /* First probe that chip */
+ ret = i2c_probe_chip(bus, chip_addr, chip_flags);
+ debug("%s: bus='%s', address %02x, ret=%d\n", __func__, bus->name,
+ chip_addr, ret);
+ if (ret)
+ return ret;
+
+ /* The chip was found, see if we have a driver, and probe it */
+ ret = i2c_get_chip(bus, chip_addr, devp);
+ debug("%s: i2c_get_chip: ret=%d\n", __func__, ret);
+
+ return ret;
+}
+
+int i2c_set_bus_speed(struct udevice *bus, unsigned int speed)
+{
+ struct dm_i2c_ops *ops = i2c_get_ops(bus);
+ struct dm_i2c_bus *i2c = bus->uclass_priv;
+ int ret;
+
+ /*
+ * If we have a method, call it. If not then the driver probably wants
+ * to deal with speed changes on the next transfer. It can easily read
+ * the current speed from this uclass
+ */
+ if (ops->set_bus_speed) {
+ ret = ops->set_bus_speed(bus, speed);
+ if (ret)
+ return ret;
+ }
+ i2c->speed_hz = speed;
+
+ return 0;
+}
+
+/*
+ * i2c_get_bus_speed:
+ *
+ * Returns speed of selected I2C bus in Hz
+ */
+int i2c_get_bus_speed(struct udevice *bus)
+{
+ struct dm_i2c_ops *ops = i2c_get_ops(bus);
+ struct dm_i2c_bus *i2c = bus->uclass_priv;
+
+ if (!ops->get_bus_speed)
+ return i2c->speed_hz;
+
+ return ops->get_bus_speed(bus);
+}
+
+int i2c_set_chip_flags(struct udevice *dev, uint flags)
+{
+ struct udevice *bus = dev->parent;
+ struct dm_i2c_chip *chip = dev_get_parentdata(dev);
+ struct dm_i2c_ops *ops = i2c_get_ops(bus);
+ int ret;
+
+ if (ops->set_flags) {
+ ret = ops->set_flags(dev, flags);
+ if (ret)
+ return ret;
+ }
+ chip->flags = flags;
+
+ return 0;
+}
+
+int i2c_get_chip_flags(struct udevice *dev, uint *flagsp)
+{
+ struct dm_i2c_chip *chip = dev_get_parentdata(dev);
+
+ *flagsp = chip->flags;
+
+ return 0;
+}
+
+int i2c_set_chip_offset_len(struct udevice *dev, uint offset_len)
+{
+ struct dm_i2c_chip *chip = dev_get_parentdata(dev);
+
+ if (offset_len > I2C_MAX_OFFSET_LEN)
+ return -EINVAL;
+ chip->offset_len = offset_len;
+
+ return 0;
+}
+
+int i2c_deblock(struct udevice *bus)
+{
+ struct dm_i2c_ops *ops = i2c_get_ops(bus);
+
+ /*
+ * We could implement a software deblocking here if we could get
+ * access to the GPIOs used by I2C, and switch them to GPIO mode
+ * and then back to I2C. This is somewhat beyond our powers in
+ * driver model at present, so for now just fail.
+ *
+ * See https://patchwork.ozlabs.org/patch/399040/
+ */
+ if (!ops->deblock)
+ return -ENOSYS;
+
+ return ops->deblock(bus);
+}
+
+int i2c_chip_ofdata_to_platdata(const void *blob, int node,
+ struct dm_i2c_chip *chip)
+{
+ chip->offset_len = 1; /* default */
+ chip->flags = 0;
+ chip->chip_addr = fdtdec_get_int(gd->fdt_blob, node, "reg", -1);
+ if (chip->chip_addr == -1) {
+ debug("%s: I2C Node '%s' has no 'reg' property\n", __func__,
+ fdt_get_name(blob, node, NULL));
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int i2c_post_probe(struct udevice *dev)
+{
+ struct dm_i2c_bus *i2c = dev->uclass_priv;
+
+ i2c->speed_hz = fdtdec_get_int(gd->fdt_blob, dev->of_offset,
+ "clock-frequency", 100000);
+
+ return i2c_set_bus_speed(dev, i2c->speed_hz);
+}
+
+int i2c_post_bind(struct udevice *dev)
+{
+ /* Scan the bus for devices */
+ return dm_scan_fdt_node(dev, gd->fdt_blob, dev->of_offset, false);
+}
+
+UCLASS_DRIVER(i2c) = {
+ .id = UCLASS_I2C,
+ .name = "i2c",
+ .per_device_auto_alloc_size = sizeof(struct dm_i2c_bus),
+ .post_bind = i2c_post_bind,
+ .post_probe = i2c_post_probe,
+};
+
+UCLASS_DRIVER(i2c_generic) = {
+ .id = UCLASS_I2C_GENERIC,
+ .name = "i2c_generic",
+};
+
+U_BOOT_DRIVER(i2c_generic_chip_drv) = {
+ .name = "i2c_generic_chip_drv",
+ .id = UCLASS_I2C_GENERIC,
+};
diff --git a/drivers/i2c/i2c_core.c b/drivers/i2c/i2c_core.c
index d34b749..41cc3b8 100644
--- a/drivers/i2c/i2c_core.c
+++ b/drivers/i2c/i2c_core.c
@@ -174,11 +174,11 @@ static int i2c_mux_set_all(void)
return 0;
}
-static int i2c_mux_disconnet_all(void)
+static int i2c_mux_disconnect_all(void)
{
struct i2c_bus_hose *i2c_bus_tmp = &i2c_bus[I2C_BUS];
int i;
- uint8_t buf;
+ uint8_t buf = 0;
if (I2C_ADAP->init_done == 0)
return 0;
@@ -197,7 +197,7 @@ static int i2c_mux_disconnet_all(void)
ret = I2C_ADAP->write(I2C_ADAP, chip, 0, 0, &buf, 1);
if (ret != 0) {
- printf("i2c: mux diconnect error\n");
+ printf("i2c: mux disconnect error\n");
return ret;
}
} while (i > 0);
@@ -293,7 +293,7 @@ int i2c_set_bus_num(unsigned int bus)
}
#ifndef CONFIG_SYS_I2C_DIRECT_BUS
- i2c_mux_disconnet_all();
+ i2c_mux_disconnect_all();
#endif
gd->cur_i2c_bus = bus;
diff --git a/drivers/i2c/sandbox_i2c.c b/drivers/i2c/sandbox_i2c.c
new file mode 100644
index 0000000..f0e9f51
--- /dev/null
+++ b/drivers/i2c/sandbox_i2c.c
@@ -0,0 +1,111 @@
+/*
+ * Simulate an I2C port
+ *
+ * Copyright (c) 2014 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <i2c.h>
+#include <asm/test.h>
+#include <dm/lists.h>
+#include <dm/device-internal.h>
+#include <dm/root.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct dm_sandbox_i2c_emul_priv {
+ struct udevice *emul;
+};
+
+static int get_emul(struct udevice *dev, struct udevice **devp,
+ struct dm_i2c_ops **opsp)
+{
+ struct dm_i2c_chip *priv;
+ int ret;
+
+ *devp = NULL;
+ *opsp = NULL;
+ priv = dev_get_parentdata(dev);
+ if (!priv->emul) {
+ ret = dm_scan_fdt_node(dev, gd->fdt_blob, dev->of_offset,
+ false);
+ if (ret)
+ return ret;
+
+ ret = device_get_child(dev, 0, &priv->emul);
+ if (ret)
+ return ret;
+ }
+ *devp = priv->emul;
+ *opsp = i2c_get_ops(priv->emul);
+
+ return 0;
+}
+
+static int sandbox_i2c_xfer(struct udevice *bus, struct i2c_msg *msg,
+ int nmsgs)
+{
+ struct dm_i2c_bus *i2c = bus->uclass_priv;
+ struct dm_i2c_ops *ops;
+ struct udevice *emul, *dev;
+ bool is_read;
+ int ret;
+
+ /* Special test code to return success but with no emulation */
+ if (msg->addr == SANDBOX_I2C_TEST_ADDR)
+ return 0;
+
+ ret = i2c_get_chip(bus, msg->addr, &dev);
+ if (ret)
+ return ret;
+
+ ret = get_emul(dev, &emul, &ops);
+ if (ret)
+ return ret;
+
+ /*
+ * For testing, don't allow writing above 100KHz for writes and
+ * 400KHz for reads
+ */
+ is_read = nmsgs > 1;
+ if (i2c->speed_hz > (is_read ? 400000 : 100000))
+ return -EINVAL;
+ return ops->xfer(emul, msg, nmsgs);
+}
+
+static const struct dm_i2c_ops sandbox_i2c_ops = {
+ .xfer = sandbox_i2c_xfer,
+};
+
+static int sandbox_i2c_child_pre_probe(struct udevice *dev)
+{
+ struct dm_i2c_chip *i2c_chip = dev_get_parentdata(dev);
+
+ /* Ignore our test address */
+ if (i2c_chip->chip_addr == SANDBOX_I2C_TEST_ADDR)
+ return 0;
+ if (dev->of_offset == -1)
+ return 0;
+
+ return i2c_chip_ofdata_to_platdata(gd->fdt_blob, dev->of_offset,
+ i2c_chip);
+}
+
+static const struct udevice_id sandbox_i2c_ids[] = {
+ { .compatible = "sandbox,i2c" },
+ { }
+};
+
+U_BOOT_DRIVER(i2c_sandbox) = {
+ .name = "i2c_sandbox",
+ .id = UCLASS_I2C,
+ .of_match = sandbox_i2c_ids,
+ .per_child_auto_alloc_size = sizeof(struct dm_i2c_chip),
+ .child_pre_probe = sandbox_i2c_child_pre_probe,
+ .ops = &sandbox_i2c_ops,
+};
diff --git a/drivers/i2c/tegra_i2c.c b/drivers/i2c/tegra_i2c.c
index 562211e..87290c3 100644
--- a/drivers/i2c/tegra_i2c.c
+++ b/drivers/i2c/tegra_i2c.c
@@ -7,6 +7,8 @@
*/
#include <common.h>
+#include <dm.h>
+#include <errno.h>
#include <fdtdec.h>
#include <i2c.h>
#include <asm/io.h>
@@ -19,6 +21,12 @@
DECLARE_GLOBAL_DATA_PTR;
+enum i2c_type {
+ TYPE_114,
+ TYPE_STD,
+ TYPE_DVC,
+};
+
/* Information about i2c controller */
struct i2c_bus {
int id;
@@ -27,20 +35,17 @@ struct i2c_bus {
int pinmux_config;
struct i2c_control *control;
struct i2c_ctlr *regs;
- int is_dvc; /* DVC type, rather than I2C */
- int is_scs; /* single clock source (T114+) */
+ enum i2c_type type;
int inited; /* bus is inited */
};
-static struct i2c_bus i2c_controllers[TEGRA_I2C_NUM_CONTROLLERS];
-
static void set_packet_mode(struct i2c_bus *i2c_bus)
{
u32 config;
config = I2C_CNFG_NEW_MASTER_FSM_MASK | I2C_CNFG_PACKET_MODE_MASK;
- if (i2c_bus->is_dvc) {
+ if (i2c_bus->type == TYPE_DVC) {
struct dvc_ctlr *dvc = (struct dvc_ctlr *)i2c_bus->regs;
writel(config, &dvc->cnfg);
@@ -65,6 +70,9 @@ static void i2c_reset_controller(struct i2c_bus *i2c_bus)
static void i2c_init_controller(struct i2c_bus *i2c_bus)
{
+ if (!i2c_bus->speed)
+ return;
+ debug("%s: speed=%d\n", __func__, i2c_bus->speed);
/*
* Use PLLP - DP-04508-001_v06 datasheet indicates a divisor of 8
* here, in section 23.3.1, but in fact we seem to need a factor of
@@ -73,7 +81,7 @@ static void i2c_init_controller(struct i2c_bus *i2c_bus)
clock_start_periph_pll(i2c_bus->periph_id, CLOCK_ID_PERIPH,
i2c_bus->speed * 2 * 8);
- if (i2c_bus->is_scs) {
+ if (i2c_bus->type == TYPE_114) {
/*
* T114 I2C went to a single clock source for standard/fast and
* HS clock speeds. The new clock rate setting calculation is:
@@ -98,7 +106,7 @@ static void i2c_init_controller(struct i2c_bus *i2c_bus)
i2c_reset_controller(i2c_bus);
/* Configure I2C controller. */
- if (i2c_bus->is_dvc) { /* only for DVC I2C */
+ if (i2c_bus->type == TYPE_DVC) { /* only for DVC I2C */
struct dvc_ctlr *dvc = (struct dvc_ctlr *)i2c_bus->regs;
setbits_le32(&dvc->ctrl3, DVC_CTRL_REG3_I2C_HW_SW_PROG_MASK);
@@ -272,7 +280,7 @@ exit:
return error;
}
-static int tegra_i2c_write_data(struct i2c_bus *bus, u32 addr, u8 *data,
+static int tegra_i2c_write_data(struct i2c_bus *i2c_bus, u32 addr, u8 *data,
u32 len, bool end_with_repeated_start)
{
int error;
@@ -286,14 +294,14 @@ static int tegra_i2c_write_data(struct i2c_bus *bus, u32 addr, u8 *data,
trans_info.num_bytes = len;
trans_info.is_10bit_address = 0;
- error = send_recv_packets(bus, &trans_info);
+ error = send_recv_packets(i2c_bus, &trans_info);
if (error)
debug("tegra_i2c_write_data: Error (%d) !!!\n", error);
return error;
}
-static int tegra_i2c_read_data(struct i2c_bus *bus, u32 addr, u8 *data,
+static int tegra_i2c_read_data(struct i2c_bus *i2c_bus, u32 addr, u8 *data,
u32 len)
{
int error;
@@ -305,52 +313,32 @@ static int tegra_i2c_read_data(struct i2c_bus *bus, u32 addr, u8 *data,
trans_info.num_bytes = len;
trans_info.is_10bit_address = 0;
- error = send_recv_packets(bus, &trans_info);
+ error = send_recv_packets(i2c_bus, &trans_info);
if (error)
debug("tegra_i2c_read_data: Error (%d) !!!\n", error);
return error;
}
-#ifndef CONFIG_OF_CONTROL
-#error "Please enable device tree support to use this driver"
-#endif
-
-/**
- * Check that a bus number is valid and return a pointer to it
- *
- * @param bus_num Bus number to check / return
- * @return pointer to bus, if valid, else NULL
- */
-static struct i2c_bus *tegra_i2c_get_bus(struct i2c_adapter *adap)
+static int tegra_i2c_set_bus_speed(struct udevice *dev, unsigned int speed)
{
- struct i2c_bus *bus;
+ struct i2c_bus *i2c_bus = dev_get_priv(dev);
- bus = &i2c_controllers[adap->hwadapnr];
- if (!bus->inited) {
- debug("%s: Bus %u not available\n", __func__, adap->hwadapnr);
- return NULL;
- }
-
- return bus;
-}
-
-static unsigned int tegra_i2c_set_bus_speed(struct i2c_adapter *adap,
- unsigned int speed)
-{
- struct i2c_bus *bus;
-
- bus = tegra_i2c_get_bus(adap);
- if (!bus)
- return 0;
- bus->speed = speed;
- i2c_init_controller(bus);
+ i2c_bus->speed = speed;
+ i2c_init_controller(i2c_bus);
return 0;
}
-static int i2c_get_config(const void *blob, int node, struct i2c_bus *i2c_bus)
+static int tegra_i2c_probe(struct udevice *dev)
{
+ struct i2c_bus *i2c_bus = dev_get_priv(dev);
+ const void *blob = gd->fdt_blob;
+ int node = dev->of_offset;
+ bool is_dvc;
+
+ i2c_bus->id = dev->seq;
+ i2c_bus->type = dev_get_of_data(dev);
i2c_bus->regs = (struct i2c_ctlr *)fdtdec_get_addr(blob, node, "reg");
/*
@@ -358,7 +346,6 @@ static int i2c_get_config(const void *blob, int node, struct i2c_bus *i2c_bus)
* far no one needs anything other than the default.
*/
i2c_bus->pinmux_config = FUNCMUX_DEFAULT;
- i2c_bus->speed = fdtdec_get_int(blob, node, "clock-frequency", 0);
i2c_bus->periph_id = clock_decode_periph_id(blob, node);
/*
@@ -371,107 +358,25 @@ static int i2c_get_config(const void *blob, int node, struct i2c_bus *i2c_bus)
* i2c_bus->pinmux_config = FUNCMUX_I2C2_PTA;
*/
if (i2c_bus->periph_id == -1)
- return -FDT_ERR_NOTFOUND;
+ return -EINVAL;
- return 0;
-}
-
-/*
- * Process a list of nodes, adding them to our list of I2C ports.
- *
- * @param blob fdt blob
- * @param node_list list of nodes to process (any <=0 are ignored)
- * @param count number of nodes to process
- * @param is_dvc 1 if these are DVC ports, 0 if standard I2C
- * @param is_scs 1 if this HW uses a single clock source (T114+)
- * @return 0 if ok, -1 on error
- */
-static int process_nodes(const void *blob, int node_list[], int count,
- int is_dvc, int is_scs)
-{
- struct i2c_bus *i2c_bus;
- int i;
-
- /* build the i2c_controllers[] for each controller */
- for (i = 0; i < count; i++) {
- int node = node_list[i];
-
- if (node <= 0)
- continue;
-
- i2c_bus = &i2c_controllers[i];
- i2c_bus->id = i;
-
- if (i2c_get_config(blob, node, i2c_bus)) {
- printf("i2c_init_board: failed to decode bus %d\n", i);
- return -1;
- }
-
- i2c_bus->is_scs = is_scs;
-
- i2c_bus->is_dvc = is_dvc;
- if (is_dvc) {
- i2c_bus->control =
- &((struct dvc_ctlr *)i2c_bus->regs)->control;
- } else {
- i2c_bus->control = &i2c_bus->regs->control;
- }
- debug("%s: controller bus %d at %p, periph_id %d, speed %d: ",
- is_dvc ? "dvc" : "i2c", i, i2c_bus->regs,
- i2c_bus->periph_id, i2c_bus->speed);
- i2c_init_controller(i2c_bus);
- debug("ok\n");
- i2c_bus->inited = 1;
-
- /* Mark position as used */
- node_list[i] = -1;
+ is_dvc = dev_get_of_data(dev) == TYPE_DVC;
+ if (is_dvc) {
+ i2c_bus->control =
+ &((struct dvc_ctlr *)i2c_bus->regs)->control;
+ } else {
+ i2c_bus->control = &i2c_bus->regs->control;
}
+ i2c_init_controller(i2c_bus);
+ debug("%s: controller bus %d at %p, periph_id %d, speed %d: ",
+ is_dvc ? "dvc" : "i2c", dev->seq, i2c_bus->regs,
+ i2c_bus->periph_id, i2c_bus->speed);
return 0;
}
-/* Sadly there is no error return from this function */
-void i2c_init_board(void)
-{
- int node_list[TEGRA_I2C_NUM_CONTROLLERS];
- const void *blob = gd->fdt_blob;
- int count;
-
- /* First check for newer (T114+) I2C ports */
- count = fdtdec_find_aliases_for_id(blob, "i2c",
- COMPAT_NVIDIA_TEGRA114_I2C, node_list,
- TEGRA_I2C_NUM_CONTROLLERS);
- if (process_nodes(blob, node_list, count, 0, 1))
- return;
-
- /* Now get the older (T20/T30) normal I2C ports */
- count = fdtdec_find_aliases_for_id(blob, "i2c",
- COMPAT_NVIDIA_TEGRA20_I2C, node_list,
- TEGRA_I2C_NUM_CONTROLLERS);
- if (process_nodes(blob, node_list, count, 0, 0))
- return;
-
- /* Now look for dvc ports */
- count = fdtdec_add_aliases_for_id(blob, "i2c",
- COMPAT_NVIDIA_TEGRA20_DVC, node_list,
- TEGRA_I2C_NUM_CONTROLLERS);
- if (process_nodes(blob, node_list, count, 1, 0))
- return;
-}
-
-static void tegra_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr)
-{
- /* No i2c support prior to relocation */
- if (!(gd->flags & GD_FLG_RELOC))
- return;
-
- /* This will override the speed selected in the fdt for that port */
- debug("i2c_init(speed=%u, slaveaddr=0x%x)\n", speed, slaveaddr);
- i2c_set_bus_speed(speed);
-}
-
/* i2c write version without the register address */
-static int i2c_write_data(struct i2c_bus *bus, uchar chip, uchar *buffer,
+static int i2c_write_data(struct i2c_bus *i2c_bus, uchar chip, uchar *buffer,
int len, bool end_with_repeated_start)
{
int rc;
@@ -484,7 +389,7 @@ static int i2c_write_data(struct i2c_bus *bus, uchar chip, uchar *buffer,
debug("\n");
/* Shift 7-bit address over for lower-level i2c functions */
- rc = tegra_i2c_write_data(bus, chip << 1, buffer, len,
+ rc = tegra_i2c_write_data(i2c_bus, chip << 1, buffer, len,
end_with_repeated_start);
if (rc)
debug("i2c_write_data(): rc=%d\n", rc);
@@ -493,14 +398,14 @@ static int i2c_write_data(struct i2c_bus *bus, uchar chip, uchar *buffer,
}
/* i2c read version without the register address */
-static int i2c_read_data(struct i2c_bus *bus, uchar chip, uchar *buffer,
- int len)
+static int i2c_read_data(struct i2c_bus *i2c_bus, uchar chip, uchar *buffer,
+ int len)
{
int rc;
debug("inside i2c_read_data():\n");
/* Shift 7-bit address over for lower-level i2c functions */
- rc = tegra_i2c_read_data(bus, chip << 1, buffer, len);
+ rc = tegra_i2c_read_data(i2c_bus, chip << 1, buffer, len);
if (rc) {
debug("i2c_read_data(): rc=%d\n", rc);
return rc;
@@ -516,132 +421,99 @@ static int i2c_read_data(struct i2c_bus *bus, uchar chip, uchar *buffer,
}
/* Probe to see if a chip is present. */
-static int tegra_i2c_probe(struct i2c_adapter *adap, uchar chip)
+static int tegra_i2c_probe_chip(struct udevice *bus, uint chip_addr,
+ uint chip_flags)
{
- struct i2c_bus *bus;
+ struct i2c_bus *i2c_bus = dev_get_priv(bus);
int rc;
- uchar reg;
-
- debug("i2c_probe: addr=0x%x\n", chip);
- bus = tegra_i2c_get_bus(adap);
- if (!bus)
- return 1;
- reg = 0;
- rc = i2c_write_data(bus, chip, &reg, 1, false);
- if (rc) {
- debug("Error probing 0x%x.\n", chip);
- return 1;
- }
- return 0;
-}
+ u8 reg;
-static int i2c_addr_ok(const uint addr, const int alen)
-{
- /* We support 7 or 10 bit addresses, so one or two bytes each */
- return alen == 1 || alen == 2;
+ /* Shift 7-bit address over for lower-level i2c functions */
+ rc = tegra_i2c_write_data(i2c_bus, chip_addr << 1, &reg, sizeof(reg),
+ false);
+
+ return rc;
}
-/* Read bytes */
-static int tegra_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr,
- int alen, uchar *buffer, int len)
+static int tegra_i2c_xfer(struct udevice *bus, struct i2c_msg *msg,
+ int nmsgs)
{
- struct i2c_bus *bus;
- uint offset;
- int i;
-
- debug("i2c_read: chip=0x%x, addr=0x%x, alen=0x%x len=0x%x\n",
- chip, addr, alen, len);
- bus = tegra_i2c_get_bus(adap);
- if (!bus)
- return 1;
- if (!i2c_addr_ok(addr, alen)) {
- debug("i2c_read: Bad address %x.%d.\n", addr, alen);
- return 1;
- }
- for (offset = 0; offset < len; offset++) {
- if (alen) {
- uchar data[alen];
- for (i = 0; i < alen; i++) {
- data[alen - i - 1] =
- (addr + offset) >> (8 * i);
- }
- if (i2c_write_data(bus, chip, data, alen, true)) {
- debug("i2c_read: error sending (0x%x)\n",
- addr);
- return 1;
- }
+ struct i2c_bus *i2c_bus = dev_get_priv(bus);
+ int ret;
+
+ debug("i2c_xfer: %d messages\n", nmsgs);
+ for (; nmsgs > 0; nmsgs--, msg++) {
+ bool next_is_read = nmsgs > 1 && (msg[1].flags & I2C_M_RD);
+
+ debug("i2c_xfer: chip=0x%x, len=0x%x\n", msg->addr, msg->len);
+ if (msg->flags & I2C_M_RD) {
+ ret = i2c_read_data(i2c_bus, msg->addr, msg->buf,
+ msg->len);
+ } else {
+ ret = i2c_write_data(i2c_bus, msg->addr, msg->buf,
+ msg->len, next_is_read);
}
- if (i2c_read_data(bus, chip, buffer + offset, 1)) {
- debug("i2c_read: error reading (0x%x)\n", addr);
- return 1;
+ if (ret) {
+ debug("i2c_write: error sending\n");
+ return -EREMOTEIO;
}
}
return 0;
}
-/* Write bytes */
-static int tegra_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr,
- int alen, uchar *buffer, int len)
+int tegra_i2c_get_dvc_bus(struct udevice **busp)
{
- struct i2c_bus *bus;
- uint offset;
- int i;
-
- debug("i2c_write: chip=0x%x, addr=0x%x, alen=0x%x len=0x%x\n",
- chip, addr, alen, len);
- bus = tegra_i2c_get_bus(adap);
- if (!bus)
- return 1;
- if (!i2c_addr_ok(addr, alen)) {
- debug("i2c_write: Bad address %x.%d.\n", addr, alen);
- return 1;
- }
- for (offset = 0; offset < len; offset++) {
- uchar data[alen + 1];
- for (i = 0; i < alen; i++)
- data[alen - i - 1] = (addr + offset) >> (8 * i);
- data[alen] = buffer[offset];
- if (i2c_write_data(bus, chip, data, alen + 1, false)) {
- debug("i2c_write: error sending (0x%x)\n", addr);
- return 1;
+ struct udevice *bus;
+
+ for (uclass_first_device(UCLASS_I2C, &bus);
+ bus;
+ uclass_next_device(&bus)) {
+ if (dev_get_of_data(bus) == TYPE_DVC) {
+ *busp = bus;
+ return 0;
}
}
- return 0;
+ return -ENODEV;
}
-int tegra_i2c_get_dvc_bus_num(void)
-{
- int i;
+static const struct dm_i2c_ops tegra_i2c_ops = {
+ .xfer = tegra_i2c_xfer,
+ .probe_chip = tegra_i2c_probe_chip,
+ .set_bus_speed = tegra_i2c_set_bus_speed,
+};
- for (i = 0; i < TEGRA_I2C_NUM_CONTROLLERS; i++) {
- struct i2c_bus *bus = &i2c_controllers[i];
+static int tegra_i2c_child_pre_probe(struct udevice *dev)
+{
+ struct dm_i2c_chip *i2c_chip = dev_get_parentdata(dev);
- if (bus->inited && bus->is_dvc)
- return i;
- }
+ if (dev->of_offset == -1)
+ return 0;
+ return i2c_chip_ofdata_to_platdata(gd->fdt_blob, dev->of_offset,
+ i2c_chip);
+}
- return -1;
+static int tegra_i2c_ofdata_to_platdata(struct udevice *dev)
+{
+ return 0;
}
-/*
- * Register soft i2c adapters
- */
-U_BOOT_I2C_ADAP_COMPLETE(tegra0, tegra_i2c_init, tegra_i2c_probe,
- tegra_i2c_read, tegra_i2c_write,
- tegra_i2c_set_bus_speed, 100000, 0, 0)
-U_BOOT_I2C_ADAP_COMPLETE(tegra1, tegra_i2c_init, tegra_i2c_probe,
- tegra_i2c_read, tegra_i2c_write,
- tegra_i2c_set_bus_speed, 100000, 0, 1)
-U_BOOT_I2C_ADAP_COMPLETE(tegra2, tegra_i2c_init, tegra_i2c_probe,
- tegra_i2c_read, tegra_i2c_write,
- tegra_i2c_set_bus_speed, 100000, 0, 2)
-U_BOOT_I2C_ADAP_COMPLETE(tegra3, tegra_i2c_init, tegra_i2c_probe,
- tegra_i2c_read, tegra_i2c_write,
- tegra_i2c_set_bus_speed, 100000, 0, 3)
-#if TEGRA_I2C_NUM_CONTROLLERS > 4
-U_BOOT_I2C_ADAP_COMPLETE(tegra4, tegra_i2c_init, tegra_i2c_probe,
- tegra_i2c_read, tegra_i2c_write,
- tegra_i2c_set_bus_speed, 100000, 0, 4)
-#endif
+static const struct udevice_id tegra_i2c_ids[] = {
+ { .compatible = "nvidia,tegra114-i2c", .data = TYPE_114 },
+ { .compatible = "nvidia,tegra20-i2c", .data = TYPE_STD },
+ { .compatible = "nvidia,tegra20-i2c-dvc", .data = TYPE_DVC },
+ { }
+};
+
+U_BOOT_DRIVER(i2c_tegra) = {
+ .name = "i2c_tegra",
+ .id = UCLASS_I2C,
+ .of_match = tegra_i2c_ids,
+ .ofdata_to_platdata = tegra_i2c_ofdata_to_platdata,
+ .probe = tegra_i2c_probe,
+ .per_child_auto_alloc_size = sizeof(struct dm_i2c_chip),
+ .child_pre_probe = tegra_i2c_child_pre_probe,
+ .priv_auto_alloc_size = sizeof(struct i2c_bus),
+ .ops = &tegra_i2c_ops,
+};
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 2f2e48f..a34972d 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -15,11 +15,16 @@ obj-$(CONFIG_CROS_EC_SANDBOX) += cros_ec_sandbox.o
obj-$(CONFIG_CROS_EC_SPI) += cros_ec_spi.o
obj-$(CONFIG_FSL_IIM) += fsl_iim.o
obj-$(CONFIG_GPIO_LED) += gpio_led.o
+obj-$(CONFIG_I2C_EEPROM) += i2c_eeprom.o
obj-$(CONFIG_FSL_MC9SDZ60) += mc9sdz60.o
obj-$(CONFIG_MXC_OCOTP) += mxc_ocotp.o
obj-$(CONFIG_MXS_OCOTP) += mxs_ocotp.o
obj-$(CONFIG_NS87308) += ns87308.o
obj-$(CONFIG_PDSP188x) += pdsp188x.o
+ifdef CONFIG_DM_I2C
+obj-$(CONFIG_SANDBOX) += i2c_eeprom_emul.o
+endif
+obj-$(CONFIG_SMSC_LPC47M) += smsc_lpc47m.o
obj-$(CONFIG_STATUS_LED) += status_led.o
obj-$(CONFIG_TWL4030_LED) += twl4030_led.o
obj-$(CONFIG_FSL_IFC) += fsl_ifc.o
diff --git a/drivers/misc/i2c_eeprom.c b/drivers/misc/i2c_eeprom.c
new file mode 100644
index 0000000..d0548ec
--- /dev/null
+++ b/drivers/misc/i2c_eeprom.c
@@ -0,0 +1,51 @@
+/*
+ * Copyright (c) 2014 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <i2c.h>
+#include <i2c_eeprom.h>
+
+static int i2c_eeprom_read(struct udevice *dev, int offset, uint8_t *buf,
+ int size)
+{
+ return -ENODEV;
+}
+
+static int i2c_eeprom_write(struct udevice *dev, int offset,
+ const uint8_t *buf, int size)
+{
+ return -ENODEV;
+}
+
+struct i2c_eeprom_ops i2c_eeprom_std_ops = {
+ .read = i2c_eeprom_read,
+ .write = i2c_eeprom_write,
+};
+
+int i2c_eeprom_std_probe(struct udevice *dev)
+{
+ return 0;
+}
+
+static const struct udevice_id i2c_eeprom_std_ids[] = {
+ { .compatible = "i2c-eeprom" },
+ { }
+};
+
+U_BOOT_DRIVER(i2c_eeprom_std) = {
+ .name = "i2c_eeprom",
+ .id = UCLASS_I2C_EEPROM,
+ .of_match = i2c_eeprom_std_ids,
+ .probe = i2c_eeprom_std_probe,
+ .priv_auto_alloc_size = sizeof(struct i2c_eeprom),
+ .ops = &i2c_eeprom_std_ops,
+};
+
+UCLASS_DRIVER(i2c_eeprom) = {
+ .id = UCLASS_I2C_EEPROM,
+ .name = "i2c_eeprom",
+};
diff --git a/drivers/misc/i2c_eeprom_emul.c b/drivers/misc/i2c_eeprom_emul.c
new file mode 100644
index 0000000..7343445
--- /dev/null
+++ b/drivers/misc/i2c_eeprom_emul.c
@@ -0,0 +1,168 @@
+/*
+ * Simulate an I2C eeprom
+ *
+ * Copyright (c) 2014 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <fdtdec.h>
+#include <i2c.h>
+#include <malloc.h>
+#include <asm/test.h>
+
+#ifdef DEBUG
+#define debug_buffer print_buffer
+#else
+#define debug_buffer(x, ...)
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct sandbox_i2c_flash_plat_data {
+ enum sandbox_i2c_eeprom_test_mode test_mode;
+ const char *filename;
+ int offset_len; /* Length of an offset in bytes */
+ int size; /* Size of data buffer */
+};
+
+struct sandbox_i2c_flash {
+ uint8_t *data;
+};
+
+void sandbox_i2c_eeprom_set_test_mode(struct udevice *dev,
+ enum sandbox_i2c_eeprom_test_mode mode)
+{
+ struct sandbox_i2c_flash_plat_data *plat = dev_get_platdata(dev);
+
+ plat->test_mode = mode;
+}
+
+void sandbox_i2c_eeprom_set_offset_len(struct udevice *dev, int offset_len)
+{
+ struct sandbox_i2c_flash_plat_data *plat = dev_get_platdata(dev);
+
+ plat->offset_len = offset_len;
+}
+
+static int sandbox_i2c_eeprom_xfer(struct udevice *emul, struct i2c_msg *msg,
+ int nmsgs)
+{
+ struct sandbox_i2c_flash *priv = dev_get_priv(emul);
+ uint offset = 0;
+
+ debug("\n%s\n", __func__);
+ debug_buffer(0, priv->data, 1, 16, 0);
+ for (; nmsgs > 0; nmsgs--, msg++) {
+ struct sandbox_i2c_flash_plat_data *plat =
+ dev_get_platdata(emul);
+ int len;
+ u8 *ptr;
+
+ if (!plat->size)
+ return -ENODEV;
+ if (msg->addr + msg->len > plat->size) {
+ debug("%s: Address %x, len %x is outside range 0..%x\n",
+ __func__, msg->addr, msg->len, plat->size);
+ return -EINVAL;
+ }
+ len = msg->len;
+ debug(" %s: msg->len=%d",
+ msg->flags & I2C_M_RD ? "read" : "write",
+ msg->len);
+ if (msg->flags & I2C_M_RD) {
+ if (plat->test_mode == SIE_TEST_MODE_SINGLE_BYTE)
+ len = 1;
+ debug(", offset %x, len %x: ", offset, len);
+ memcpy(msg->buf, priv->data + offset, len);
+ memset(msg->buf + len, '\xff', msg->len - len);
+ debug_buffer(0, msg->buf, 1, msg->len, 0);
+ } else if (len >= plat->offset_len) {
+ int i;
+
+ ptr = msg->buf;
+ for (i = 0; i < plat->offset_len; i++, len--)
+ offset = (offset << 8) | *ptr++;
+ debug(", set offset %x: ", offset);
+ debug_buffer(0, msg->buf, 1, msg->len, 0);
+ if (plat->test_mode == SIE_TEST_MODE_SINGLE_BYTE)
+ len = min(len, 1);
+
+ /* For testing, map offsets into our limited buffer */
+ for (i = 24; i > 0; i -= 8) {
+ if (offset > (1 << i)) {
+ offset = (offset >> i) |
+ (offset & ((1 << i) - 1));
+ offset += i;
+ }
+ }
+ memcpy(priv->data + offset, ptr, len);
+ }
+ }
+ debug_buffer(0, priv->data, 1, 16, 0);
+
+ return 0;
+}
+
+struct dm_i2c_ops sandbox_i2c_emul_ops = {
+ .xfer = sandbox_i2c_eeprom_xfer,
+};
+
+static int sandbox_i2c_eeprom_ofdata_to_platdata(struct udevice *dev)
+{
+ struct sandbox_i2c_flash_plat_data *plat = dev_get_platdata(dev);
+
+ plat->size = fdtdec_get_int(gd->fdt_blob, dev->of_offset,
+ "sandbox,size", 32);
+ plat->filename = fdt_getprop(gd->fdt_blob, dev->of_offset,
+ "sandbox,filename", NULL);
+ if (!plat->filename) {
+ debug("%s: No filename for device '%s'\n", __func__,
+ dev->name);
+ return -EINVAL;
+ }
+ plat->test_mode = SIE_TEST_MODE_NONE;
+ plat->offset_len = 1;
+
+ return 0;
+}
+
+static int sandbox_i2c_eeprom_probe(struct udevice *dev)
+{
+ struct sandbox_i2c_flash_plat_data *plat = dev_get_platdata(dev);
+ struct sandbox_i2c_flash *priv = dev_get_priv(dev);
+
+ priv->data = calloc(1, plat->size);
+ if (!priv->data)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static int sandbox_i2c_eeprom_remove(struct udevice *dev)
+{
+ struct sandbox_i2c_flash *priv = dev_get_priv(dev);
+
+ free(priv->data);
+
+ return 0;
+}
+
+static const struct udevice_id sandbox_i2c_ids[] = {
+ { .compatible = "sandbox,i2c-eeprom" },
+ { }
+};
+
+U_BOOT_DRIVER(sandbox_i2c_emul) = {
+ .name = "sandbox_i2c_eeprom_emul",
+ .id = UCLASS_I2C_EMUL,
+ .of_match = sandbox_i2c_ids,
+ .ofdata_to_platdata = sandbox_i2c_eeprom_ofdata_to_platdata,
+ .probe = sandbox_i2c_eeprom_probe,
+ .remove = sandbox_i2c_eeprom_remove,
+ .priv_auto_alloc_size = sizeof(struct sandbox_i2c_flash),
+ .platdata_auto_alloc_size = sizeof(struct sandbox_i2c_flash_plat_data),
+ .ops = &sandbox_i2c_emul_ops,
+};
diff --git a/drivers/misc/mxc_ocotp.c b/drivers/misc/mxc_ocotp.c
index 89737af..d92044e 100644
--- a/drivers/misc/mxc_ocotp.c
+++ b/drivers/misc/mxc_ocotp.c
@@ -81,8 +81,6 @@ static int finish_access(struct ocotp_regs *regs, const char *caller)
err = !!(readl(&regs->ctrl) & BM_CTRL_ERROR);
clear_error(regs);
- enable_ocotp_clk(0);
-
if (err) {
printf("mxc_ocotp %s(): Access protect error\n", caller);
return -EIO;
diff --git a/drivers/misc/mxs_ocotp.c b/drivers/misc/mxs_ocotp.c
index 545d3eb..6f0a1d3 100644
--- a/drivers/misc/mxs_ocotp.c
+++ b/drivers/misc/mxs_ocotp.c
@@ -187,6 +187,8 @@ static int mxs_ocotp_write_fuse(uint32_t addr, uint32_t mask)
uint32_t hclk_val, vddio_val;
int ret;
+ mxs_ocotp_clear_error();
+
/* Make sure the banks are closed for reading. */
ret = mxs_ocotp_read_bank_open(0);
if (ret) {
@@ -221,13 +223,17 @@ static int mxs_ocotp_write_fuse(uint32_t addr, uint32_t mask)
goto fail;
}
+ /* Check for errors */
+ if (readl(&ocotp_regs->hw_ocotp_ctrl) & OCOTP_CTRL_ERROR) {
+ puts("Failed writing fuses!\n");
+ ret = -EPERM;
+ goto fail;
+ }
+
fail:
mxs_ocotp_scale_vddio(0, &vddio_val);
- ret = mxs_ocotp_scale_hclk(0, &hclk_val);
- if (ret) {
+ if (mxs_ocotp_scale_hclk(0, &hclk_val))
puts("Failed scaling up the HCLK!\n");
- return ret;
- }
return ret;
}
diff --git a/drivers/misc/smsc_lpc47m.c b/drivers/misc/smsc_lpc47m.c
new file mode 100644
index 0000000..d51f8e3
--- /dev/null
+++ b/drivers/misc/smsc_lpc47m.c
@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/pnp_def.h>
+
+static void pnp_enter_conf_state(u16 dev)
+{
+ u16 port = dev >> 8;
+
+ outb(0x55, port);
+}
+
+static void pnp_exit_conf_state(u16 dev)
+{
+ u16 port = dev >> 8;
+
+ outb(0xaa, port);
+}
+
+void lpc47m_enable_serial(u16 dev, u16 iobase)
+{
+ pnp_enter_conf_state(dev);
+ pnp_set_logical_device(dev);
+ pnp_set_enable(dev, 0);
+ pnp_set_iobase(dev, PNP_IDX_IO0, iobase);
+ pnp_set_enable(dev, 1);
+ pnp_exit_conf_state(dev);
+}
diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c
index 785eed5..b18c75d 100644
--- a/drivers/mmc/dw_mmc.c
+++ b/drivers/mmc/dw_mmc.c
@@ -318,7 +318,7 @@ static void dwmci_set_ios(struct mmc *mmc)
dwmci_writel(host, DWMCI_CTYPE, ctype);
regs = dwmci_readl(host, DWMCI_UHS_REG);
- if (mmc->card_caps & MMC_MODE_DDR_52MHz)
+ if (mmc->ddr_mode)
regs |= DWMCI_DDR_MODE;
else
regs &= DWMCI_DDR_MODE;
diff --git a/drivers/mmc/exynos_dw_mmc.c b/drivers/mmc/exynos_dw_mmc.c
index d96dfe1..dfa209b 100644
--- a/drivers/mmc/exynos_dw_mmc.c
+++ b/drivers/mmc/exynos_dw_mmc.c
@@ -101,7 +101,7 @@ static int exynos_dwmci_core_init(struct dwmci_host *host, int index)
host->get_mmc_clk = exynos_dwmci_get_clk;
/* Add the mmc channel to be registered with mmc core */
if (add_dwmci(host, DWMMC_MAX_FREQ, DWMMC_MIN_FREQ)) {
- debug("dwmmc%d registration failed\n", index);
+ printf("DWMMC%d registration failed\n", index);
return -1;
}
return 0;
@@ -146,7 +146,7 @@ static int do_dwmci_init(struct dwmci_host *host)
flag = host->buswidth == 8 ? PINMUX_FLAG_8BIT_MODE : PINMUX_FLAG_NONE;
err = exynos_pinmux_config(host->dev_id, flag);
if (err) {
- debug("DWMMC not configure\n");
+ printf("DWMMC%d not configure\n", index);
return err;
}
@@ -162,21 +162,22 @@ static int exynos_dwmci_get_config(const void *blob, int node,
/* Extract device id for each mmc channel */
host->dev_id = pinmux_decode_periph_id(blob, node);
+ host->dev_index = fdtdec_get_int(blob, node, "index", host->dev_id);
+ if (host->dev_index == host->dev_id)
+ host->dev_index = host->dev_id - PERIPH_ID_SDMMC0;
+
+
/* Get the bus width from the device node */
host->buswidth = fdtdec_get_int(blob, node, "samsung,bus-width", 0);
if (host->buswidth <= 0) {
- debug("DWMMC: Can't get bus-width\n");
+ printf("DWMMC%d: Can't get bus-width\n", host->dev_index);
return -EINVAL;
}
- host->dev_index = fdtdec_get_int(blob, node, "index", host->dev_id);
- if (host->dev_index == host->dev_id)
- host->dev_index = host->dev_id - PERIPH_ID_SDMMC0;
-
/* Set the base address from the device node */
base = fdtdec_get_addr(blob, node, "reg");
if (!base) {
- debug("DWMMC: Can't get base address\n");
+ printf("DWMMC%d: Can't get base address\n", host->dev_index);
return -EINVAL;
}
host->ioaddr = (void *)base;
@@ -184,7 +185,8 @@ static int exynos_dwmci_get_config(const void *blob, int node,
/* Extract the timing info from the node */
err = fdtdec_get_int_array(blob, node, "samsung,timing", timing, 3);
if (err) {
- debug("Can't get sdr-timings for devider\n");
+ printf("DWMMC%d: Can't get sdr-timings for devider\n",
+ host->dev_index);
return -EINVAL;
}
@@ -214,7 +216,7 @@ static int exynos_dwmci_process_node(const void *blob,
host = &dwmci_host[i];
err = exynos_dwmci_get_config(blob, node, host);
if (err) {
- debug("%s: failed to decode dev %d\n", __func__, i);
+ printf("%s: failed to decode dev %d\n", __func__, i);
return err;
}
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 44a4feb..1eb9c27 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -159,7 +159,7 @@ int mmc_set_blocklen(struct mmc *mmc, int len)
{
struct mmc_cmd cmd;
- if (mmc->card_caps & MMC_MODE_DDR_52MHz)
+ if (mmc->ddr_mode)
return 0;
cmd.cmdidx = MMC_CMD_SET_BLOCKLEN;
@@ -486,7 +486,7 @@ static int mmc_change_freq(struct mmc *mmc)
char cardtype;
int err;
- mmc->card_caps = 0;
+ mmc->card_caps = MMC_MODE_4BIT | MMC_MODE_8BIT;
if (mmc_host_is_spi(mmc))
return 0;
@@ -519,7 +519,7 @@ static int mmc_change_freq(struct mmc *mmc)
/* High Speed is set, there are two types: 52MHz and 26MHz */
if (cardtype & EXT_CSD_CARD_TYPE_52) {
- if (cardtype & EXT_CSD_CARD_TYPE_DDR_52)
+ if (cardtype & EXT_CSD_CARD_TYPE_DDR_1_8V)
mmc->card_caps |= MMC_MODE_DDR_52MHz;
mmc->card_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
} else {
@@ -1001,6 +1001,9 @@ static int mmc_startup(struct mmc *mmc)
case 6:
mmc->version = MMC_VERSION_4_5;
break;
+ case 7:
+ mmc->version = MMC_VERSION_5_0;
+ break;
}
/*
@@ -1022,6 +1025,21 @@ static int mmc_startup(struct mmc *mmc)
mmc->erase_grp_size =
ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] *
MMC_MAX_BLOCK_LEN * 1024;
+ /*
+ * if high capacity and partition setting completed
+ * SEC_COUNT is valid even if it is smaller than 2 GiB
+ * JEDEC Standard JESD84-B45, 6.2.4
+ */
+ if (mmc->high_capacity &&
+ (ext_csd[EXT_CSD_PARTITION_SETTING] &
+ EXT_CSD_PARTITION_SETTING_COMPLETED)) {
+ capacity = (ext_csd[EXT_CSD_SEC_CNT]) |
+ (ext_csd[EXT_CSD_SEC_CNT + 1] << 8) |
+ (ext_csd[EXT_CSD_SEC_CNT + 2] << 16) |
+ (ext_csd[EXT_CSD_SEC_CNT + 3] << 24);
+ capacity *= MMC_MAX_BLOCK_LEN;
+ mmc->capacity_user = capacity;
+ }
} else {
/* Calculate the group size from the csd value. */
int erase_gsz, erase_gmul;
@@ -1103,8 +1121,10 @@ static int mmc_startup(struct mmc *mmc)
/* An array to map CSD bus widths to host cap bits */
static unsigned ext_to_hostcaps[] = {
- [EXT_CSD_DDR_BUS_WIDTH_4] = MMC_MODE_DDR_52MHz,
- [EXT_CSD_DDR_BUS_WIDTH_8] = MMC_MODE_DDR_52MHz,
+ [EXT_CSD_DDR_BUS_WIDTH_4] =
+ MMC_MODE_DDR_52MHz | MMC_MODE_4BIT,
+ [EXT_CSD_DDR_BUS_WIDTH_8] =
+ MMC_MODE_DDR_52MHz | MMC_MODE_8BIT,
[EXT_CSD_BUS_WIDTH_4] = MMC_MODE_4BIT,
[EXT_CSD_BUS_WIDTH_8] = MMC_MODE_8BIT,
};
@@ -1116,13 +1136,13 @@ static int mmc_startup(struct mmc *mmc)
for (idx=0; idx < ARRAY_SIZE(ext_csd_bits); idx++) {
unsigned int extw = ext_csd_bits[idx];
+ unsigned int caps = ext_to_hostcaps[extw];
/*
- * Check to make sure the controller supports
- * this bus width, if it's more than 1
+ * Check to make sure the card and controller support
+ * these capabilities
*/
- if (extw != EXT_CSD_BUS_WIDTH_1 &&
- !(mmc->cfg->host_caps & ext_to_hostcaps[extw]))
+ if ((mmc->card_caps & caps) != caps)
continue;
err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
@@ -1131,26 +1151,33 @@ static int mmc_startup(struct mmc *mmc)
if (err)
continue;
+ mmc->ddr_mode = (caps & MMC_MODE_DDR_52MHz) ? 1 : 0;
mmc_set_bus_width(mmc, widths[idx]);
err = mmc_send_ext_csd(mmc, test_csd);
+
+ if (err)
+ continue;
+
/* Only compare read only fields */
- if (!err && ext_csd[EXT_CSD_PARTITIONING_SUPPORT] \
- == test_csd[EXT_CSD_PARTITIONING_SUPPORT]
- && ext_csd[EXT_CSD_HC_WP_GRP_SIZE] \
- == test_csd[EXT_CSD_HC_WP_GRP_SIZE] \
- && ext_csd[EXT_CSD_REV] \
- == test_csd[EXT_CSD_REV]
- && ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] \
- == test_csd[EXT_CSD_HC_ERASE_GRP_SIZE]
- && memcmp(&ext_csd[EXT_CSD_SEC_CNT], \
- &test_csd[EXT_CSD_SEC_CNT], 4) == 0) {
-
- mmc->card_caps |= ext_to_hostcaps[extw];
+ if (ext_csd[EXT_CSD_PARTITIONING_SUPPORT]
+ == test_csd[EXT_CSD_PARTITIONING_SUPPORT] &&
+ ext_csd[EXT_CSD_HC_WP_GRP_SIZE]
+ == test_csd[EXT_CSD_HC_WP_GRP_SIZE] &&
+ ext_csd[EXT_CSD_REV]
+ == test_csd[EXT_CSD_REV] &&
+ ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE]
+ == test_csd[EXT_CSD_HC_ERASE_GRP_SIZE] &&
+ memcmp(&ext_csd[EXT_CSD_SEC_CNT],
+ &test_csd[EXT_CSD_SEC_CNT], 4) == 0)
break;
- }
+ else
+ err = SWITCH_ERR;
}
+ if (err)
+ return err;
+
if (mmc->card_caps & MMC_MODE_HS) {
if (mmc->card_caps & MMC_MODE_HS_52MHz)
mmc->tran_speed = 52000000;
@@ -1161,6 +1188,12 @@ static int mmc_startup(struct mmc *mmc)
mmc_set_clock(mmc, mmc->tran_speed);
+ /* Fix the block length for DDR mode */
+ if (mmc->ddr_mode) {
+ mmc->read_bl_len = MMC_MAX_BLOCK_LEN;
+ mmc->write_bl_len = MMC_MAX_BLOCK_LEN;
+ }
+
/* fill in device description */
mmc->block_dev.lun = 0;
mmc->block_dev.type = 0;
@@ -1277,6 +1310,11 @@ block_dev_desc_t *mmc_get_dev(int dev)
}
#endif
+/* board-specific MMC power initializations. */
+__weak void board_mmc_power_init(void)
+{
+}
+
int mmc_start_init(struct mmc *mmc)
{
int err;
@@ -1293,12 +1331,15 @@ int mmc_start_init(struct mmc *mmc)
if (mmc->has_init)
return 0;
+ board_mmc_power_init();
+
/* made sure it's not NULL earlier */
err = mmc->cfg->ops->init(mmc);
if (err)
return err;
+ mmc->ddr_mode = 0;
mmc_set_bus_width(mmc, 1);
mmc_set_clock(mmc, 1);
@@ -1401,8 +1442,11 @@ void print_mmc_devices(char separator)
printf("%s: %d", m->cfg->name, m->block_dev.dev);
- if (entry->next != &mmc_devices)
- printf("%c ", separator);
+ if (entry->next != &mmc_devices) {
+ printf("%c", separator);
+ if (separator != '\n')
+ puts (" ");
+ }
}
printf("\n");
diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c
index ffb5284..c880ced 100644
--- a/drivers/mmc/omap_hsmmc.c
+++ b/drivers/mmc/omap_hsmmc.c
@@ -135,12 +135,7 @@ static unsigned char mmc_board_init(struct mmc *mmc)
pbias_lite = readl(&t2_base->pbias_lite);
pbias_lite &= ~(PBIASLITEPWRDNZ1 | PBIASLITEPWRDNZ0);
writel(pbias_lite, &t2_base->pbias_lite);
-#endif
-#if defined(CONFIG_TWL4030_POWER)
- twl4030_power_mmc_init();
- mdelay(100); /* ramp-up delay from Linux code */
-#endif
-#if defined(CONFIG_OMAP34XX)
+
writel(pbias_lite | PBIASLITEPWRDNZ1 |
PBIASSPEEDCTRL0 | PBIASLITEPWRDNZ0,
&t2_base->pbias_lite);
@@ -663,7 +658,8 @@ int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max, int cd_gpio,
case 1:
priv_data->base_addr = (struct hsmmc *)OMAP_HSMMC2_BASE;
#if (defined(CONFIG_OMAP44XX) || defined(CONFIG_OMAP54XX) || \
- defined(CONFIG_DRA7XX)) && defined(CONFIG_HSMMC2_8BIT)
+ defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)) && \
+ defined(CONFIG_HSMMC2_8BIT)
/* Enable 8-bit interface for eMMC on OMAP4/5 or DRA7XX */
host_caps_val |= MMC_MODE_8BIT;
#endif
@@ -672,7 +668,7 @@ int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max, int cd_gpio,
#ifdef OMAP_HSMMC3_BASE
case 2:
priv_data->base_addr = (struct hsmmc *)OMAP_HSMMC3_BASE;
-#if defined(CONFIG_DRA7XX) && defined(CONFIG_HSMMC3_8BIT)
+#if (defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)) && defined(CONFIG_HSMMC3_8BIT)
/* Enable 8-bit interface for eMMC on DRA7XX */
host_caps_val |= MMC_MODE_8BIT;
#endif
diff --git a/drivers/mmc/sh_mmcif.c b/drivers/mmc/sh_mmcif.c
index ed83a14..76ba93b 100644
--- a/drivers/mmc/sh_mmcif.c
+++ b/drivers/mmc/sh_mmcif.c
@@ -103,20 +103,18 @@ static int mmcif_wait_interrupt_flag(struct sh_mmcif_host *host)
static void sh_mmcif_clock_control(struct sh_mmcif_host *host, unsigned int clk)
{
- int i;
-
sh_mmcif_bitclr(CLK_ENABLE, &host->regs->ce_clk_ctrl);
sh_mmcif_bitclr(CLK_CLEAR, &host->regs->ce_clk_ctrl);
if (!clk)
return;
- if (clk == CLKDEV_EMMC_DATA) {
+
+ if (clk == CLKDEV_EMMC_DATA)
sh_mmcif_bitset(CLK_PCLK, &host->regs->ce_clk_ctrl);
- } else {
- for (i = 1; (unsigned int)host->clk / (1 << i) >= clk; i++)
- ;
- sh_mmcif_bitset((i - 1) << 16, &host->regs->ce_clk_ctrl);
- }
+ else
+ sh_mmcif_bitset((fls(DIV_ROUND_UP(host->clk,
+ clk) - 1) - 1) << 16,
+ &host->regs->ce_clk_ctrl);
sh_mmcif_bitset(CLK_ENABLE, &host->regs->ce_clk_ctrl);
}
@@ -581,8 +579,6 @@ static struct mmc_config sh_mmcif_cfg = {
.host_caps = MMC_MODE_HS | MMC_MODE_HS_52MHz | MMC_MODE_4BIT |
MMC_MODE_8BIT | MMC_MODE_HC,
.voltages = MMC_VDD_32_33 | MMC_VDD_33_34,
- .f_min = CLKDEV_MMC_INIT,
- .f_max = CLKDEV_EMMC_DATA,
.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT,
};
@@ -599,6 +595,9 @@ int mmcif_mmc_init(void)
host->regs = (struct sh_mmcif_regs *)CONFIG_SH_MMCIF_ADDR;
host->clk = CONFIG_SH_MMCIF_CLK;
+ sh_mmcif_cfg.f_min = MMC_CLK_DIV_MIN(host->clk);
+ sh_mmcif_cfg.f_max = MMC_CLK_DIV_MAX(host->clk);
+
mmc = mmc_create(&sh_mmcif_cfg, host);
if (mmc == NULL) {
free(host);
diff --git a/drivers/mmc/sh_mmcif.h b/drivers/mmc/sh_mmcif.h
index bd6fbf7..4b6752f 100644
--- a/drivers/mmc/sh_mmcif.h
+++ b/drivers/mmc/sh_mmcif.h
@@ -199,7 +199,13 @@ struct sh_mmcif_regs {
#define SOFT_RST_OFF (0 << 31)
#define CLKDEV_EMMC_DATA 52000000 /* 52MHz */
-#define CLKDEV_MMC_INIT 400000 /* 100 - 400 KHz */
+#ifdef CONFIG_RMOBILE
+#define MMC_CLK_DIV_MIN(clk) (clk / (1 << 9))
+#define MMC_CLK_DIV_MAX(clk) (clk / (1 << 1))
+#else
+#define MMC_CLK_DIV_MIN(clk) (clk / (1 << 8))
+#define MMC_CLK_DIV_MAX(clk) CLKDEV_EMMC_DATA
+#endif
#define MMC_BUS_WIDTH_1 0
#define MMC_BUS_WIDTH_4 2
diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c
index 81b5070..b283eae 100644
--- a/drivers/mtd/nand/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/fsl_ifc_nand.c
@@ -292,7 +292,7 @@ static int fsl_ifc_run_command(struct mtd_info *mtd)
struct fsl_ifc *ifc = ctrl->regs;
u32 timeo = (CONFIG_SYS_HZ * 10) / 1000;
u32 time_start;
- u32 eccstat[4];
+ u32 eccstat[4] = {0};
int i;
/* set the chip select for NAND Transaction */
diff --git a/drivers/mtd/nand/fsl_ifc_spl.c b/drivers/mtd/nand/fsl_ifc_spl.c
index e336cb1..fb827c5 100644
--- a/drivers/mtd/nand/fsl_ifc_spl.c
+++ b/drivers/mtd/nand/fsl_ifc_spl.c
@@ -254,3 +254,13 @@ void nand_boot(void)
uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START;
uboot();
}
+
+#ifndef CONFIG_SPL_NAND_INIT
+void nand_init(void)
+{
+}
+
+void nand_deselect(void)
+{
+}
+#endif
diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c
index 40d6705..93829a4 100644
--- a/drivers/mtd/nand/omap_gpmc.c
+++ b/drivers/mtd/nand/omap_gpmc.c
@@ -73,14 +73,11 @@ static void omap_nand_hwcontrol(struct mtd_info *mtd, int32_t cmd,
writeb(cmd, this->IO_ADDR_W);
}
-#ifdef CONFIG_SPL_BUILD
/* Check wait pin as dev ready indicator */
-static int omap_spl_dev_ready(struct mtd_info *mtd)
+static int omap_dev_ready(struct mtd_info *mtd)
{
return gpmc_cfg->status & (1 << 8);
}
-#endif
-
/*
* gen_true_ecc - This function will generate true ECC value, which
@@ -887,7 +884,9 @@ int board_nand_init(struct nand_chip *nand)
nand->read_buf = nand_read_buf16;
else
nand->read_buf = nand_read_buf;
- nand->dev_ready = omap_spl_dev_ready;
#endif
+
+ nand->dev_ready = omap_dev_ready;
+
return 0;
}
diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h
index 5b7670c..785f7a9 100644
--- a/drivers/mtd/spi/sf_internal.h
+++ b/drivers/mtd/spi/sf_internal.h
@@ -23,13 +23,16 @@ enum spi_dual_flash {
/* Enum list - Full read commands */
enum spi_read_cmds {
ARRAY_SLOW = 1 << 0,
- DUAL_OUTPUT_FAST = 1 << 1,
- DUAL_IO_FAST = 1 << 2,
- QUAD_OUTPUT_FAST = 1 << 3,
- QUAD_IO_FAST = 1 << 4,
+ ARRAY_FAST = 1 << 1,
+ DUAL_OUTPUT_FAST = 1 << 2,
+ DUAL_IO_FAST = 1 << 3,
+ QUAD_OUTPUT_FAST = 1 << 4,
+ QUAD_IO_FAST = 1 << 5,
};
-#define RD_EXTN (ARRAY_SLOW | DUAL_OUTPUT_FAST | DUAL_IO_FAST)
+/* Normal - Extended - Full command set */
+#define RD_NORM (ARRAY_SLOW | ARRAY_FAST)
+#define RD_EXTN (RD_NORM | DUAL_OUTPUT_FAST | DUAL_IO_FAST)
#define RD_FULL (RD_EXTN | QUAD_OUTPUT_FAST | QUAD_IO_FAST)
/* sf param flags */
@@ -37,9 +40,13 @@ enum {
SECT_4K = 1 << 0,
SECT_32K = 1 << 1,
E_FSR = 1 << 2,
- WR_QPP = 1 << 3,
+ SST_BP = 1 << 3,
+ SST_WP = 1 << 4,
+ WR_QPP = 1 << 5,
};
+#define SST_WR (SST_BP | SST_WP)
+
#define SPI_FLASH_3B_ADDR_LEN 3
#define SPI_FLASH_CMD_LEN (1 + SPI_FLASH_3B_ADDR_LEN)
#define SPI_FLASH_16MB_BOUN 0x1000000
@@ -101,12 +108,13 @@ enum {
/* SST specific */
#ifdef CONFIG_SPI_FLASH_SST
-# define SST_WP 0x01 /* Supports AAI word program */
# define CMD_SST_BP 0x02 /* Byte Program */
# define CMD_SST_AAI_WP 0xAD /* Auto Address Incr Word Program */
int sst_write_wp(struct spi_flash *flash, u32 offset, size_t len,
const void *buf);
+int sst_write_bp(struct spi_flash *flash, u32 offset, size_t len,
+ const void *buf);
#endif
/**
diff --git a/drivers/mtd/spi/sf_ops.c b/drivers/mtd/spi/sf_ops.c
index 759231f..34bc54e 100644
--- a/drivers/mtd/spi/sf_ops.c
+++ b/drivers/mtd/spi/sf_ops.c
@@ -517,4 +517,35 @@ int sst_write_wp(struct spi_flash *flash, u32 offset, size_t len,
spi_release_bus(flash->spi);
return ret;
}
+
+int sst_write_bp(struct spi_flash *flash, u32 offset, size_t len,
+ const void *buf)
+{
+ size_t actual;
+ int ret;
+
+ ret = spi_claim_bus(flash->spi);
+ if (ret) {
+ debug("SF: Unable to claim SPI bus\n");
+ return ret;
+ }
+
+ for (actual = 0; actual < len; actual++) {
+ ret = sst_byte_write(flash, offset, buf + actual);
+ if (ret) {
+ debug("SF: sst byte program failed\n");
+ break;
+ }
+ offset++;
+ }
+
+ if (!ret)
+ ret = spi_flash_cmd_write_disable(flash);
+
+ debug("SF: sst: program %s %zu bytes @ 0x%zx\n",
+ ret ? "failure" : "success", len, offset - actual);
+
+ spi_release_bus(flash->spi);
+ return ret;
+}
#endif
diff --git a/drivers/mtd/spi/sf_params.c b/drivers/mtd/spi/sf_params.c
index 61545ca..30875b3 100644
--- a/drivers/mtd/spi/sf_params.c
+++ b/drivers/mtd/spi/sf_params.c
@@ -15,42 +15,42 @@
/* SPI/QSPI flash device params structure */
const struct spi_flash_params spi_flash_params_table[] = {
#ifdef CONFIG_SPI_FLASH_ATMEL /* ATMEL */
- {"AT45DB011D", 0x1f2200, 0x0, 64 * 1024, 4, 0, SECT_4K},
- {"AT45DB021D", 0x1f2300, 0x0, 64 * 1024, 8, 0, SECT_4K},
- {"AT45DB041D", 0x1f2400, 0x0, 64 * 1024, 8, 0, SECT_4K},
- {"AT45DB081D", 0x1f2500, 0x0, 64 * 1024, 16, 0, SECT_4K},
- {"AT45DB161D", 0x1f2600, 0x0, 64 * 1024, 32, 0, SECT_4K},
- {"AT45DB321D", 0x1f2700, 0x0, 64 * 1024, 64, 0, SECT_4K},
- {"AT45DB641D", 0x1f2800, 0x0, 64 * 1024, 128, 0, SECT_4K},
- {"AT25DF321", 0x1f4701, 0x0, 64 * 1024, 64, 0, SECT_4K},
+ {"AT45DB011D", 0x1f2200, 0x0, 64 * 1024, 4, RD_NORM, SECT_4K},
+ {"AT45DB021D", 0x1f2300, 0x0, 64 * 1024, 8, RD_NORM, SECT_4K},
+ {"AT45DB041D", 0x1f2400, 0x0, 64 * 1024, 8, RD_NORM, SECT_4K},
+ {"AT45DB081D", 0x1f2500, 0x0, 64 * 1024, 16, RD_NORM, SECT_4K},
+ {"AT45DB161D", 0x1f2600, 0x0, 64 * 1024, 32, RD_NORM, SECT_4K},
+ {"AT45DB321D", 0x1f2700, 0x0, 64 * 1024, 64, RD_NORM, SECT_4K},
+ {"AT45DB641D", 0x1f2800, 0x0, 64 * 1024, 128, RD_NORM, SECT_4K},
+ {"AT25DF321", 0x1f4701, 0x0, 64 * 1024, 64, RD_NORM, SECT_4K},
#endif
#ifdef CONFIG_SPI_FLASH_EON /* EON */
- {"EN25Q32B", 0x1c3016, 0x0, 64 * 1024, 64, 0, 0},
- {"EN25Q64", 0x1c3017, 0x0, 64 * 1024, 128, 0, SECT_4K},
- {"EN25Q128B", 0x1c3018, 0x0, 64 * 1024, 256, 0, 0},
- {"EN25S64", 0x1c3817, 0x0, 64 * 1024, 128, 0, 0},
+ {"EN25Q32B", 0x1c3016, 0x0, 64 * 1024, 64, RD_NORM, 0},
+ {"EN25Q64", 0x1c3017, 0x0, 64 * 1024, 128, RD_NORM, SECT_4K},
+ {"EN25Q128B", 0x1c3018, 0x0, 64 * 1024, 256, RD_NORM, 0},
+ {"EN25S64", 0x1c3817, 0x0, 64 * 1024, 128, RD_NORM, 0},
#endif
#ifdef CONFIG_SPI_FLASH_GIGADEVICE /* GIGADEVICE */
- {"GD25Q64B", 0xc84017, 0x0, 64 * 1024, 128, 0, SECT_4K},
- {"GD25LQ32", 0xc86016, 0x0, 64 * 1024, 64, 0, SECT_4K},
+ {"GD25Q64B", 0xc84017, 0x0, 64 * 1024, 128, RD_NORM, SECT_4K},
+ {"GD25LQ32", 0xc86016, 0x0, 64 * 1024, 64, RD_NORM, SECT_4K},
#endif
#ifdef CONFIG_SPI_FLASH_MACRONIX /* MACRONIX */
- {"MX25L2006E", 0xc22012, 0x0, 64 * 1024, 4, 0, 0},
- {"MX25L4005", 0xc22013, 0x0, 64 * 1024, 8, 0, 0},
- {"MX25L8005", 0xc22014, 0x0, 64 * 1024, 16, 0, 0},
- {"MX25L1605D", 0xc22015, 0x0, 64 * 1024, 32, 0, 0},
- {"MX25L3205D", 0xc22016, 0x0, 64 * 1024, 64, 0, 0},
- {"MX25L6405D", 0xc22017, 0x0, 64 * 1024, 128, 0, 0},
+ {"MX25L2006E", 0xc22012, 0x0, 64 * 1024, 4, RD_NORM, 0},
+ {"MX25L4005", 0xc22013, 0x0, 64 * 1024, 8, RD_NORM, 0},
+ {"MX25L8005", 0xc22014, 0x0, 64 * 1024, 16, RD_NORM, 0},
+ {"MX25L1605D", 0xc22015, 0x0, 64 * 1024, 32, RD_NORM, 0},
+ {"MX25L3205D", 0xc22016, 0x0, 64 * 1024, 64, RD_NORM, 0},
+ {"MX25L6405D", 0xc22017, 0x0, 64 * 1024, 128, RD_NORM, 0},
{"MX25L12805", 0xc22018, 0x0, 64 * 1024, 256, RD_FULL, WR_QPP},
{"MX25L25635F", 0xc22019, 0x0, 64 * 1024, 512, RD_FULL, WR_QPP},
{"MX25L51235F", 0xc2201a, 0x0, 64 * 1024, 1024, RD_FULL, WR_QPP},
{"MX25L12855E", 0xc22618, 0x0, 64 * 1024, 256, RD_FULL, WR_QPP},
#endif
#ifdef CONFIG_SPI_FLASH_SPANSION /* SPANSION */
- {"S25FL008A", 0x010213, 0x0, 64 * 1024, 16, 0, 0},
- {"S25FL016A", 0x010214, 0x0, 64 * 1024, 32, 0, 0},
- {"S25FL032A", 0x010215, 0x0, 64 * 1024, 64, 0, 0},
- {"S25FL064A", 0x010216, 0x0, 64 * 1024, 128, 0, 0},
+ {"S25FL008A", 0x010213, 0x0, 64 * 1024, 16, RD_NORM, 0},
+ {"S25FL016A", 0x010214, 0x0, 64 * 1024, 32, RD_NORM, 0},
+ {"S25FL032A", 0x010215, 0x0, 64 * 1024, 64, RD_NORM, 0},
+ {"S25FL064A", 0x010216, 0x0, 64 * 1024, 128, RD_NORM, 0},
{"S25FL128P_256K", 0x012018, 0x0300, 256 * 1024, 64, RD_FULL, WR_QPP},
{"S25FL128P_64K", 0x012018, 0x0301, 64 * 1024, 256, RD_FULL, WR_QPP},
{"S25FL032P", 0x010215, 0x4d00, 64 * 1024, 64, RD_FULL, WR_QPP},
@@ -64,17 +64,17 @@ const struct spi_flash_params spi_flash_params_table[] = {
{"S25FL512S_512K", 0x010220, 0x4f00, 256 * 1024, 256, RD_FULL, WR_QPP},
#endif
#ifdef CONFIG_SPI_FLASH_STMICRO /* STMICRO */
- {"M25P10", 0x202011, 0x0, 32 * 1024, 4, 0, 0},
- {"M25P20", 0x202012, 0x0, 64 * 1024, 4, 0, 0},
- {"M25P40", 0x202013, 0x0, 64 * 1024, 8, 0, 0},
- {"M25P80", 0x202014, 0x0, 64 * 1024, 16, 0, 0},
- {"M25P16", 0x202015, 0x0, 64 * 1024, 32, 0, 0},
- {"M25PE16", 0x208015, 0x1000, 64 * 1024, 32, 0, 0},
+ {"M25P10", 0x202011, 0x0, 32 * 1024, 4, RD_NORM, 0},
+ {"M25P20", 0x202012, 0x0, 64 * 1024, 4, RD_NORM, 0},
+ {"M25P40", 0x202013, 0x0, 64 * 1024, 8, RD_NORM, 0},
+ {"M25P80", 0x202014, 0x0, 64 * 1024, 16, RD_NORM, 0},
+ {"M25P16", 0x202015, 0x0, 64 * 1024, 32, RD_NORM, 0},
+ {"M25PE16", 0x208015, 0x1000, 64 * 1024, 32, RD_NORM, 0},
{"M25PX16", 0x207115, 0x1000, 64 * 1024, 32, RD_EXTN, 0},
- {"M25P32", 0x202016, 0x0, 64 * 1024, 64, 0, 0},
- {"M25P64", 0x202017, 0x0, 64 * 1024, 128, 0, 0},
- {"M25P128", 0x202018, 0x0, 256 * 1024, 64, 0, 0},
- {"M25PX64", 0x207117, 0x0, 64 * 1024, 128, 0, SECT_4K},
+ {"M25P32", 0x202016, 0x0, 64 * 1024, 64, RD_NORM, 0},
+ {"M25P64", 0x202017, 0x0, 64 * 1024, 128, RD_NORM, 0},
+ {"M25P128", 0x202018, 0x0, 256 * 1024, 64, RD_NORM, 0},
+ {"M25PX64", 0x207117, 0x0, 64 * 1024, 128, RD_NORM, SECT_4K},
{"N25Q32", 0x20ba16, 0x0, 64 * 1024, 64, RD_FULL, WR_QPP | SECT_4K},
{"N25Q32A", 0x20bb16, 0x0, 64 * 1024, 64, RD_FULL, WR_QPP | SECT_4K},
{"N25Q64", 0x20ba17, 0x0, 64 * 1024, 128, RD_FULL, WR_QPP | SECT_4K},
@@ -89,25 +89,25 @@ const struct spi_flash_params spi_flash_params_table[] = {
{"N25Q1024A", 0x20bb21, 0x0, 64 * 1024, 2048, RD_FULL, WR_QPP | E_FSR | SECT_4K},
#endif
#ifdef CONFIG_SPI_FLASH_SST /* SST */
- {"SST25VF040B", 0xbf258d, 0x0, 64 * 1024, 8, 0, SECT_4K | SST_WP},
- {"SST25VF080B", 0xbf258e, 0x0, 64 * 1024, 16, 0, SECT_4K | SST_WP},
- {"SST25VF016B", 0xbf2541, 0x0, 64 * 1024, 32, 0, SECT_4K | SST_WP},
- {"SST25VF032B", 0xbf254a, 0x0, 64 * 1024, 64, 0, SECT_4K | SST_WP},
- {"SST25VF064C", 0xbf254b, 0x0, 64 * 1024, 128, 0, SECT_4K},
- {"SST25WF512", 0xbf2501, 0x0, 64 * 1024, 1, 0, SECT_4K | SST_WP},
- {"SST25WF010", 0xbf2502, 0x0, 64 * 1024, 2, 0, SECT_4K | SST_WP},
- {"SST25WF020", 0xbf2503, 0x0, 64 * 1024, 4, 0, SECT_4K | SST_WP},
- {"SST25WF040", 0xbf2504, 0x0, 64 * 1024, 8, 0, SECT_4K | SST_WP},
- {"SST25WF080", 0xbf2505, 0x0, 64 * 1024, 16, 0, SECT_4K | SST_WP},
+ {"SST25VF040B", 0xbf258d, 0x0, 64 * 1024, 8, RD_NORM, SECT_4K | SST_WR},
+ {"SST25VF080B", 0xbf258e, 0x0, 64 * 1024, 16, RD_NORM, SECT_4K | SST_WR},
+ {"SST25VF016B", 0xbf2541, 0x0, 64 * 1024, 32, RD_NORM, SECT_4K | SST_WR},
+ {"SST25VF032B", 0xbf254a, 0x0, 64 * 1024, 64, RD_NORM, SECT_4K | SST_WR},
+ {"SST25VF064C", 0xbf254b, 0x0, 64 * 1024, 128, RD_NORM, SECT_4K},
+ {"SST25WF512", 0xbf2501, 0x0, 64 * 1024, 1, RD_NORM, SECT_4K | SST_WR},
+ {"SST25WF010", 0xbf2502, 0x0, 64 * 1024, 2, RD_NORM, SECT_4K | SST_WR},
+ {"SST25WF020", 0xbf2503, 0x0, 64 * 1024, 4, RD_NORM, SECT_4K | SST_WR},
+ {"SST25WF040", 0xbf2504, 0x0, 64 * 1024, 8, RD_NORM, SECT_4K | SST_WR},
+ {"SST25WF080", 0xbf2505, 0x0, 64 * 1024, 16, RD_NORM, SECT_4K | SST_WR},
#endif
#ifdef CONFIG_SPI_FLASH_WINBOND /* WINBOND */
- {"W25P80", 0xef2014, 0x0, 64 * 1024, 16, 0, 0},
- {"W25P16", 0xef2015, 0x0, 64 * 1024, 32, 0, 0},
- {"W25P32", 0xef2016, 0x0, 64 * 1024, 64, 0, 0},
- {"W25X40", 0xef3013, 0x0, 64 * 1024, 8, 0, SECT_4K},
- {"W25X16", 0xef3015, 0x0, 64 * 1024, 32, 0, SECT_4K},
- {"W25X32", 0xef3016, 0x0, 64 * 1024, 64, 0, SECT_4K},
- {"W25X64", 0xef3017, 0x0, 64 * 1024, 128, 0, SECT_4K},
+ {"W25P80", 0xef2014, 0x0, 64 * 1024, 16, RD_NORM, 0},
+ {"W25P16", 0xef2015, 0x0, 64 * 1024, 32, RD_NORM, 0},
+ {"W25P32", 0xef2016, 0x0, 64 * 1024, 64, RD_NORM, 0},
+ {"W25X40", 0xef3013, 0x0, 64 * 1024, 8, RD_NORM, SECT_4K},
+ {"W25X16", 0xef3015, 0x0, 64 * 1024, 32, RD_NORM, SECT_4K},
+ {"W25X32", 0xef3016, 0x0, 64 * 1024, 64, RD_NORM, SECT_4K},
+ {"W25X64", 0xef3017, 0x0, 64 * 1024, 128, RD_NORM, SECT_4K},
{"W25Q80BL", 0xef4014, 0x0, 64 * 1024, 16, RD_FULL, WR_QPP | SECT_4K},
{"W25Q16CL", 0xef4015, 0x0, 64 * 1024, 32, RD_FULL, WR_QPP | SECT_4K},
{"W25Q32BV", 0xef4016, 0x0, 64 * 1024, 64, RD_FULL, WR_QPP | SECT_4K},
diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c
index 2636426..ce9987f 100644
--- a/drivers/mtd/spi/sf_probe.c
+++ b/drivers/mtd/spi/sf_probe.c
@@ -24,6 +24,7 @@ DECLARE_GLOBAL_DATA_PTR;
/* Read commands array */
static u8 spi_read_cmds_array[] = {
CMD_READ_ARRAY_SLOW,
+ CMD_READ_ARRAY_FAST,
CMD_READ_DUAL_OUTPUT_FAST,
CMD_READ_DUAL_IO_FAST,
CMD_READ_QUAD_OUTPUT_FAST,
@@ -135,8 +136,12 @@ static int spi_flash_validate_params(struct spi_slave *spi, u8 *idcode,
#ifndef CONFIG_DM_SPI_FLASH
flash->write = spi_flash_cmd_write_ops;
#if defined(CONFIG_SPI_FLASH_SST)
- if (params->flags & SST_WP)
- flash->write = sst_write_wp;
+ if (params->flags & SST_WR) {
+ if (flash->spi->op_mode_tx & SPI_OPM_TX_BP)
+ flash->write = sst_write_bp;
+ else
+ flash->write = sst_write_wp;
+ }
#endif
flash->erase = spi_flash_cmd_erase_ops;
flash->read = spi_flash_cmd_read_ops;
diff --git a/drivers/net/fm/Makefile b/drivers/net/fm/Makefile
index 5ae3b16..d052fcb 100644
--- a/drivers/net/fm/Makefile
+++ b/drivers/net/fm/Makefile
@@ -28,6 +28,8 @@ obj-$(CONFIG_PPC_T1040) += t1040.o
obj-$(CONFIG_PPC_T1042) += t1040.o
obj-$(CONFIG_PPC_T1020) += t1040.o
obj-$(CONFIG_PPC_T1022) += t1040.o
+obj-$(CONFIG_PPC_T1023) += t1024.o
+obj-$(CONFIG_PPC_T1024) += t1024.o
obj-$(CONFIG_PPC_T2080) += t2080.o
obj-$(CONFIG_PPC_T2081) += t2080.o
obj-$(CONFIG_PPC_T4240) += t4240.o
diff --git a/drivers/net/fm/b4860.c b/drivers/net/fm/b4860.c
index 373cc4f..eb058c9 100644
--- a/drivers/net/fm/b4860.c
+++ b/drivers/net/fm/b4860.c
@@ -10,6 +10,7 @@
#include <asm/io.h>
#include <asm/immap_85xx.h>
#include <asm/fsl_serdes.h>
+#include <hwconfig.h>
u32 port_to_devdisr[] = {
[FM1_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC1_1,
@@ -46,15 +47,76 @@ void fman_enable_port(enum fm_port port)
phy_interface_t fman_port_enet_if(enum fm_port port)
{
+#if defined(CONFIG_B4860QDS)
+ u32 serdes2_prtcl;
+ char buffer[HWCONFIG_BUFFER_SIZE];
+ char *buf = NULL;
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+#endif
+
if (is_device_disabled(port))
return PHY_INTERFACE_MODE_NONE;
/*B4860 has two 10Gig Mac*/
if ((port == FM1_10GEC1 || port == FM1_10GEC2) &&
((is_serdes_configured(XAUI_FM1_MAC9)) ||
- (is_serdes_configured(XAUI_FM1_MAC10))))
+ #if !defined(CONFIG_B4860QDS)
+ (is_serdes_configured(XFI_FM1_MAC9)) ||
+ (is_serdes_configured(XFI_FM1_MAC10)) ||
+ #endif
+ (is_serdes_configured(XAUI_FM1_MAC10))
+ ))
return PHY_INTERFACE_MODE_XGMII;
+#if defined(CONFIG_B4860QDS)
+ serdes2_prtcl = in_be32(&gur->rcwsr[4]) &
+ FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
+
+ if (serdes2_prtcl) {
+ serdes2_prtcl >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
+ switch (serdes2_prtcl) {
+ case 0x80:
+ case 0x81:
+ case 0x82:
+ case 0x83:
+ case 0x84:
+ case 0x85:
+ case 0x86:
+ case 0x87:
+ case 0x88:
+ case 0x89:
+ case 0x8a:
+ case 0x8b:
+ case 0x8c:
+ case 0x8d:
+ case 0x8e:
+ case 0xb1:
+ case 0xb2:
+ /*
+ * Extract hwconfig from environment since environment
+ * is not setup yet
+ */
+ getenv_f("hwconfig", buffer, sizeof(buffer));
+ buf = buffer;
+
+ /* check if XFI interface enable in hwconfig for 10g */
+ if (hwconfig_subarg_cmp_f("fsl_b4860_serdes2",
+ "sfp_amc", "sfp", buf)) {
+ if ((port == FM1_10GEC1 ||
+ port == FM1_10GEC2) &&
+ ((is_serdes_configured(XFI_FM1_MAC9)) ||
+ (is_serdes_configured(XFI_FM1_MAC10))))
+ return PHY_INTERFACE_MODE_XGMII;
+ else if ((port == FM1_DTSEC1) ||
+ (port == FM1_DTSEC2) ||
+ (port == FM1_DTSEC3) ||
+ (port == FM1_DTSEC4))
+ return PHY_INTERFACE_MODE_NONE;
+ }
+ }
+ }
+#endif
+
/* Fix me need to handle RGMII here first */
switch (port) {
diff --git a/drivers/net/fm/eth.c b/drivers/net/fm/eth.c
index 137886c..f1e39b9 100644
--- a/drivers/net/fm/eth.c
+++ b/drivers/net/fm/eth.c
@@ -565,9 +565,11 @@ static int fm_eth_init_mac(struct fm_eth *fm_eth, struct ccsr_fman *reg)
num = fm_eth->num;
#ifdef CONFIG_SYS_FMAN_V3
+#ifndef CONFIG_FSL_FM_10GEC_REGULAR_NOTATION
if (fm_eth->type == FM_ETH_10G_E) {
- /* 10GEC1/10GEC2 use mEMAC9/mEMAC10
- * 10GEC3/10GEC4 use mEMAC1/mEMAC2
+ /* 10GEC1/10GEC2 use mEMAC9/mEMAC10 on T2080/T4240.
+ * 10GEC3/10GEC4 use mEMAC1/mEMAC2 on T2080.
+ * 10GEC1 uses mEMAC1 on T1024.
* so it needs to change the num.
*/
if (fm_eth->num >= 2)
@@ -575,6 +577,7 @@ static int fm_eth_init_mac(struct fm_eth *fm_eth, struct ccsr_fman *reg)
else
num += 8;
}
+#endif
base = &reg->memac[num].fm_memac;
phyregs = &reg->memac[num].fm_memac_mdio;
#else
diff --git a/drivers/net/fm/init.c b/drivers/net/fm/init.c
index 6cf21c6..5d82f29 100644
--- a/drivers/net/fm/init.c
+++ b/drivers/net/fm/init.c
@@ -254,8 +254,10 @@ static void ft_fixup_port(void *blob, struct fm_eth_info *info, char *prop)
*/
if (((info->port == FM1_DTSEC9) && (PORT_IS_ENABLED(FM1_10GEC1))) ||
((info->port == FM1_DTSEC10) && (PORT_IS_ENABLED(FM1_10GEC2))) ||
+ ((info->port == FM1_DTSEC1) && (PORT_IS_ENABLED(FM1_10GEC1))) ||
((info->port == FM1_DTSEC1) && (PORT_IS_ENABLED(FM1_10GEC3))) ||
((info->port == FM1_DTSEC2) && (PORT_IS_ENABLED(FM1_10GEC4))) ||
+ ((info->port == FM1_10GEC1) && (PORT_IS_ENABLED(FM1_DTSEC1))) ||
((info->port == FM1_10GEC1) && (PORT_IS_ENABLED(FM1_DTSEC9))) ||
((info->port == FM1_10GEC2) && (PORT_IS_ENABLED(FM1_DTSEC10))) ||
((info->port == FM1_10GEC3) && (PORT_IS_ENABLED(FM1_DTSEC1))) ||
diff --git a/drivers/net/fm/t1024.c b/drivers/net/fm/t1024.c
new file mode 100644
index 0000000..9b31173
--- /dev/null
+++ b/drivers/net/fm/t1024.c
@@ -0,0 +1,88 @@
+/* Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * Shengzhou Liu <Shengzhou.Liu@freescale.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <phy.h>
+#include <fm_eth.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_serdes.h>
+
+u32 port_to_devdisr[] = {
+ [FM1_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC1_1,
+ [FM1_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC1_2,
+ [FM1_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC1_3,
+ [FM1_DTSEC4] = FSL_CORENET_DEVDISR2_DTSEC1_4,
+ [FM1_10GEC1] = FSL_CORENET_DEVDISR2_10GEC1_1, /* MAC1 */
+};
+
+static int is_device_disabled(enum fm_port port)
+{
+ ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 devdisr2 = in_be32(&gur->devdisr2);
+
+ return port_to_devdisr[port] & devdisr2;
+}
+
+void fman_disable_port(enum fm_port port)
+{
+ ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+
+ setbits_be32(&gur->devdisr2, port_to_devdisr[port]);
+}
+
+phy_interface_t fman_port_enet_if(enum fm_port port)
+{
+ ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 rcwsr13 = in_be32(&gur->rcwsr[13]);
+
+ if (is_device_disabled(port))
+ return PHY_INTERFACE_MODE_NONE;
+
+ if ((port == FM1_10GEC1) && (is_serdes_configured(XFI_FM1_MAC1)))
+ return PHY_INTERFACE_MODE_XGMII;
+
+ if ((port == FM1_DTSEC3) && ((rcwsr13 & FSL_CORENET_RCWSR13_EC2) ==
+ FSL_CORENET_RCWSR13_EC2_RGMII) &&
+ (!is_serdes_configured(QSGMII_FM1_A)))
+ return PHY_INTERFACE_MODE_RGMII;
+
+ if ((port == FM1_DTSEC4) && ((rcwsr13 & FSL_CORENET_RCWSR13_EC1) ==
+ FSL_CORENET_RCWSR13_EC1_RGMII) &&
+ (!is_serdes_configured(QSGMII_FM1_A)))
+ return PHY_INTERFACE_MODE_RGMII;
+
+ /* handle SGMII */
+ switch (port) {
+ case FM1_DTSEC1:
+ case FM1_DTSEC2:
+ case FM1_DTSEC3:
+ if (is_serdes_configured(SGMII_FM1_DTSEC1 + port - FM1_DTSEC1))
+ return PHY_INTERFACE_MODE_SGMII;
+ else if (is_serdes_configured(SGMII_2500_FM1_DTSEC1
+ + port - FM1_DTSEC1))
+ return PHY_INTERFACE_MODE_SGMII_2500;
+ break;
+ default:
+ break;
+ }
+
+ /* handle QSGMII */
+ switch (port) {
+ case FM1_DTSEC1:
+ case FM1_DTSEC2:
+ case FM1_DTSEC3:
+ case FM1_DTSEC4:
+ /* check lane A on SerDes1 */
+ if (is_serdes_configured(QSGMII_FM1_A))
+ return PHY_INTERFACE_MODE_QSGMII;
+ break;
+ default:
+ break;
+ }
+
+ return PHY_INTERFACE_MODE_NONE;
+}
diff --git a/drivers/net/fm/t1040.c b/drivers/net/fm/t1040.c
index 4cce46d..d2a097e 100644
--- a/drivers/net/fm/t1040.c
+++ b/drivers/net/fm/t1040.c
@@ -25,8 +25,6 @@ phy_interface_t fman_port_enet_if(enum fm_port port)
else if ((rcwsr13 & FSL_CORENET_RCWSR13_EC1) ==
FSL_CORENET_RCWSR13_EC1_FM1_DTSEC4_MII)
return PHY_INTERFACE_MODE_MII;
- else
- return PHY_INTERFACE_MODE_NONE;
}
if ((port == FM1_DTSEC4) &&
@@ -38,8 +36,6 @@ phy_interface_t fman_port_enet_if(enum fm_port port)
else if ((rcwsr13 & FSL_CORENET_RCWSR13_EC1) ==
FSL_CORENET_RCWSR13_EC1_FM1_DTSEC4_MII)
return PHY_INTERFACE_MODE_MII;
- else
- return PHY_INTERFACE_MODE_NONE;
}
if (port == FM1_DTSEC5) {
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 9556536..f46bf00 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_PHYLIB) += phy.o
obj-$(CONFIG_PHYLIB_10G) += generic_10g.o
obj-$(CONFIG_PHY_ATHEROS) += atheros.o
obj-$(CONFIG_PHY_BROADCOM) += broadcom.o
+obj-$(CONFIG_PHY_CORTINA) += cortina.o
obj-$(CONFIG_PHY_DAVICOM) += davicom.o
obj-$(CONFIG_PHY_ET1011C) += et1011c.o
obj-$(CONFIG_PHY_LXT) += lxt.o
diff --git a/drivers/net/phy/cortina.c b/drivers/net/phy/cortina.c
new file mode 100644
index 0000000..254f056
--- /dev/null
+++ b/drivers/net/phy/cortina.c
@@ -0,0 +1,333 @@
+/*
+ * Cortina CS4315/CS4340 10G PHY drivers
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ */
+
+#include <config.h>
+#include <common.h>
+#include <malloc.h>
+#include <linux/ctype.h>
+#include <linux/string.h>
+#include <linux/err.h>
+#include <phy.h>
+#include <cortina.h>
+#ifdef CONFIG_SYS_CORTINA_FW_IN_NAND
+#include <nand.h>
+#elif defined(CONFIG_SYS_CORTINA_FW_IN_SPIFLASH)
+#include <spi_flash.h>
+#elif defined(CONFIG_SYS_CORTINA_FW_IN_MMC)
+#include <mmc.h>
+#endif
+
+#ifndef CONFIG_PHYLIB_10G
+#error The Cortina PHY needs 10G support
+#endif
+
+struct cortina_reg_config cortina_reg_cfg[] = {
+ /* CS4315_enable_sr_mode */
+ {VILLA_GLOBAL_MSEQCLKCTRL, 0x8004},
+ {VILLA_MSEQ_OPTIONS, 0xf},
+ {VILLA_MSEQ_PC, 0x0},
+ {VILLA_MSEQ_BANKSELECT, 0x4},
+ {VILLA_LINE_SDS_COMMON_SRX0_RX_CPA, 0x55},
+ {VILLA_LINE_SDS_COMMON_SRX0_RX_LOOP_FILTER, 0x30},
+ {VILLA_DSP_SDS_SERDES_SRX_DFE0_SELECT, 0x1},
+ {VILLA_DSP_SDS_DSP_COEF_DFE0_SELECT, 0x2},
+ {VILLA_LINE_SDS_COMMON_SRX0_RX_CPB, 0x2003},
+ {VILLA_DSP_SDS_SERDES_SRX_FFE_DELAY_CTRL, 0xF047},
+ {VILLA_MSEQ_ENABLE_MSB, 0x0000},
+ {VILLA_MSEQ_SPARE21_LSB, 0x6},
+ {VILLA_MSEQ_RESET_COUNT_LSB, 0x0},
+ {VILLA_MSEQ_SPARE12_MSB, 0x0000},
+ /*
+ * to invert the receiver path, uncomment the next line
+ * write (VILLA_MSEQ_SPARE12_MSB, 0x4000)
+ *
+ * SPARE2_LSB is used to configure the device while in sr mode to
+ * enable power savings and to use the optical module LOS signal.
+ * in power savings mode, the internal prbs checker can not be used.
+ * if the optical module LOS signal is used as an input to the micro
+ * code, then the micro code will wait until the optical module
+ * LOS = 0 before turning on the adaptive equalizer.
+ * Setting SPARE2_LSB bit 0 to 1 places the devie in power savings mode
+ * while setting bit 0 to 0 disables power savings mode.
+ * Setting SPARE2_LSB bit 2 to 0 configures the device to use the
+ * optical module LOS signal while setting bit 2 to 1 configures the
+ * device so that it will ignore the optical module LOS SPARE2_LSB = 0
+ */
+
+ /* enable power savings, ignore optical module LOS */
+ {VILLA_MSEQ_SPARE2_LSB, 0x5},
+
+ {VILLA_MSEQ_SPARE7_LSB, 0x1e},
+ {VILLA_MSEQ_BANKSELECT, 0x4},
+ {VILLA_MSEQ_SPARE9_LSB, 0x2},
+ {VILLA_MSEQ_SPARE3_LSB, 0x0F53},
+ {VILLA_MSEQ_SPARE3_MSB, 0x2006},
+ {VILLA_MSEQ_SPARE8_LSB, 0x3FF7},
+ {VILLA_MSEQ_SPARE8_MSB, 0x0A46},
+ {VILLA_MSEQ_COEF8_FFE0_LSB, 0xD500},
+ {VILLA_MSEQ_COEF8_FFE1_LSB, 0x0200},
+ {VILLA_MSEQ_COEF8_FFE2_LSB, 0xBA00},
+ {VILLA_MSEQ_COEF8_FFE3_LSB, 0x0100},
+ {VILLA_MSEQ_COEF8_FFE4_LSB, 0x0300},
+ {VILLA_MSEQ_COEF8_FFE5_LSB, 0x0300},
+ {VILLA_MSEQ_COEF8_DFE0_LSB, 0x0700},
+ {VILLA_MSEQ_COEF8_DFE0N_LSB, 0x0E00},
+ {VILLA_MSEQ_COEF8_DFE1_LSB, 0x0B00},
+ {VILLA_DSP_SDS_DSP_COEF_LARGE_LEAK, 0x2},
+ {VILLA_DSP_SDS_SERDES_SRX_DAC_ENABLEB_LSB, 0xD000},
+ {VILLA_MSEQ_POWER_DOWN_LSB, 0xFFFF},
+ {VILLA_MSEQ_POWER_DOWN_MSB, 0x0},
+ {VILLA_MSEQ_CAL_RX_SLICER, 0x80},
+ {VILLA_DSP_SDS_SERDES_SRX_DAC_BIAS_SELECT1_MSB, 0x3f},
+ {VILLA_GLOBAL_MSEQCLKCTRL, 0x4},
+ {VILLA_MSEQ_OPTIONS, 0x7},
+
+ /* set up min value for ffe1 */
+ {VILLA_MSEQ_COEF_INIT_SEL, 0x2},
+ {VILLA_DSP_SDS_DSP_PRECODEDINITFFE21, 0x41},
+
+ /* CS4315_sr_rx_pre_eq_set_4in */
+ {VILLA_GLOBAL_MSEQCLKCTRL, 0x8004},
+ {VILLA_MSEQ_OPTIONS, 0xf},
+ {VILLA_MSEQ_BANKSELECT, 0x4},
+ {VILLA_MSEQ_PC, 0x0},
+
+ /* for lengths from 3.5 to 4.5inches */
+ {VILLA_MSEQ_SERDES_PARAM_LSB, 0x0306},
+ {VILLA_MSEQ_SPARE25_LSB, 0x0306},
+ {VILLA_MSEQ_SPARE21_LSB, 0x2},
+ {VILLA_MSEQ_SPARE23_LSB, 0x2},
+ {VILLA_MSEQ_CAL_RX_DFE_EQ, 0x0},
+
+ {VILLA_GLOBAL_MSEQCLKCTRL, 0x4},
+ {VILLA_MSEQ_OPTIONS, 0x7},
+
+ /* CS4315_rx_drive_4inch */
+ /* for length 4inches */
+ {VILLA_GLOBAL_VILLA2_COMPATIBLE, 0x0000},
+ {VILLA_HOST_SDS_COMMON_STX0_TX_OUTPUT_CTRLA, 0x3023},
+ {VILLA_LINE_SDS_COMMON_STX0_TX_OUTPUT_CTRLB, 0xc01E},
+
+ /* CS4315_tx_drive_4inch */
+ /* for length 4inches */
+ {VILLA_GLOBAL_VILLA2_COMPATIBLE, 0x0000},
+ {VILLA_LINE_SDS_COMMON_STX0_TX_OUTPUT_CTRLA, 0x3023},
+ {VILLA_LINE_SDS_COMMON_STX0_TX_OUTPUT_CTRLB, 0xc01E},
+};
+
+void cs4340_upload_firmware(struct phy_device *phydev)
+{
+ char line_temp[0x50] = {0};
+ char reg_addr[0x50] = {0};
+ char reg_data[0x50] = {0};
+ int i, line_cnt = 0, column_cnt = 0;
+ struct cortina_reg_config fw_temp;
+ char *addr = NULL;
+
+#if defined(CONFIG_SYS_CORTINA_FW_IN_NOR) || \
+ defined(CONFIG_SYS_CORTINA_FW_IN_REMOTE)
+
+ addr = (char *)CONFIG_CORTINA_FW_ADDR;
+#elif defined(CONFIG_SYS_CORTINA_FW_IN_NAND)
+ int ret;
+ size_t fw_length = CONFIG_CORTINA_FW_LENGTH;
+
+ addr = malloc(CONFIG_CORTINA_FW_LENGTH);
+ ret = nand_read(&nand_info[0], (loff_t)CONFIG_CORTINA_FW_ADDR,
+ &fw_length, (u_char *)addr);
+ if (ret == -EUCLEAN) {
+ printf("NAND read of Cortina firmware at 0x%x failed %d\n",
+ CONFIG_CORTINA_FW_ADDR, ret);
+ }
+#elif defined(CONFIG_SYS_CORTINA_FW_IN_SPIFLASH)
+ int ret;
+ struct spi_flash *ucode_flash;
+
+ addr = malloc(CONFIG_CORTINA_FW_LENGTH);
+ ucode_flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS,
+ CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE);
+ if (!ucode_flash) {
+ puts("SF: probe for Cortina ucode failed\n");
+ } else {
+ ret = spi_flash_read(ucode_flash, CONFIG_CORTINA_FW_ADDR,
+ CONFIG_CORTINA_FW_LENGTH, addr);
+ if (ret)
+ puts("SF: read for Cortina ucode failed\n");
+ spi_flash_free(ucode_flash);
+ }
+#elif defined(CONFIG_SYS_CORTINA_FW_IN_MMC)
+ int dev = CONFIG_SYS_MMC_ENV_DEV;
+ u32 cnt = CONFIG_CORTINA_FW_LENGTH / 512;
+ u32 blk = CONFIG_CORTINA_FW_ADDR / 512;
+ struct mmc *mmc = find_mmc_device(CONFIG_SYS_MMC_ENV_DEV);
+
+ if (!mmc) {
+ puts("Failed to find MMC device for Cortina ucode\n");
+ } else {
+ addr = malloc(CONFIG_CORTINA_FW_LENGTH);
+ printf("MMC read: dev # %u, block # %u, count %u ...\n",
+ dev, blk, cnt);
+ mmc_init(mmc);
+ (void)mmc->block_dev.block_read(dev, blk, cnt, addr);
+ /* flush cache after read */
+ flush_cache((ulong)addr, cnt * 512);
+ }
+#endif
+
+ while (*addr != 'Q') {
+ i = 0;
+
+ while (*addr != 0x0a) {
+ line_temp[i++] = *addr++;
+ if (0x50 < i) {
+ printf("Not found Cortina PHY ucode at 0x%x\n",
+ CONFIG_CORTINA_FW_ADDR);
+ return;
+ }
+ }
+
+ addr++; /* skip '\n' */
+ line_cnt++;
+ column_cnt = i;
+ line_temp[column_cnt] = '\0';
+
+ if (CONFIG_CORTINA_FW_LENGTH < line_cnt)
+ return;
+
+ for (i = 0; i < column_cnt; i++) {
+ if (isspace(line_temp[i++]))
+ break;
+ }
+
+ memcpy(reg_addr, line_temp, i);
+ memcpy(reg_data, &line_temp[i], column_cnt - i);
+ strim(reg_addr);
+ strim(reg_data);
+ fw_temp.reg_addr = (simple_strtoul(reg_addr, NULL, 0)) & 0xffff;
+ fw_temp.reg_value = (simple_strtoul(reg_data, NULL, 0)) &
+ 0xffff;
+ phy_write(phydev, 0x00, fw_temp.reg_addr, fw_temp.reg_value);
+ }
+}
+
+int cs4340_phy_init(struct phy_device *phydev)
+{
+ int timeout = 100; /* 100ms */
+ int reg_value;
+
+ /* step1: BIST test */
+ phy_write(phydev, 0x00, VILLA_GLOBAL_MSEQCLKCTRL, 0x0004);
+ phy_write(phydev, 0x00, VILLA_GLOBAL_LINE_SOFT_RESET, 0x0000);
+ phy_write(phydev, 0x00, VILLA_GLOBAL_BIST_CONTROL, 0x0001);
+ while (--timeout) {
+ reg_value = phy_read(phydev, 0x00, VILLA_GLOBAL_BIST_STATUS);
+ if (reg_value & mseq_edc_bist_done) {
+ if (0 == (reg_value & mseq_edc_bist_fail))
+ break;
+ }
+ udelay(1000);
+ }
+
+ if (!timeout) {
+ printf("%s BIST mseq_edc_bist_done timeout!\n", __func__);
+ return -1;
+ }
+
+ /* setp2: upload ucode */
+ cs4340_upload_firmware(phydev);
+ reg_value = phy_read(phydev, 0x00, VILLA_GLOBAL_DWNLD_CHECKSUM_STATUS);
+ if (reg_value) {
+ debug("%s checksum status failed.\n", __func__);
+ return -1;
+ }
+
+ return 0;
+}
+
+int cs4340_config(struct phy_device *phydev)
+{
+ cs4340_phy_init(phydev);
+ return 0;
+}
+
+int cs4340_startup(struct phy_device *phydev)
+{
+ phydev->link = 1;
+
+ /* For now just lie and say it's 10G all the time */
+ phydev->speed = SPEED_10000;
+ phydev->duplex = DUPLEX_FULL;
+ return 0;
+}
+
+struct phy_driver cs4340_driver = {
+ .name = "Cortina CS4315/CS4340",
+ .uid = PHY_UID_CS4340,
+ .mask = 0xfffffff0,
+ .features = PHY_10G_FEATURES,
+ .mmds = (MDIO_DEVS_PMAPMD | MDIO_DEVS_PCS |
+ MDIO_DEVS_PHYXS | MDIO_DEVS_AN |
+ MDIO_DEVS_VEND1 | MDIO_DEVS_VEND2),
+ .config = &cs4340_config,
+ .startup = &cs4340_startup,
+ .shutdown = &gen10g_shutdown,
+};
+
+int phy_cortina_init(void)
+{
+ phy_register(&cs4340_driver);
+ return 0;
+}
+
+int get_phy_id(struct mii_dev *bus, int addr, int devad, u32 *phy_id)
+{
+ int phy_reg;
+ bool is_cortina_phy = false;
+
+ switch (addr) {
+#ifdef CORTINA_PHY_ADDR1
+ case CORTINA_PHY_ADDR1:
+#endif
+#ifdef CORTINA_PHY_ADDR2
+ case CORTINA_PHY_ADDR2:
+#endif
+#ifdef CORTINA_PHY_ADDR3
+ case CORTINA_PHY_ADDR3:
+#endif
+#ifdef CORTINA_PHY_ADDR4
+ case CORTINA_PHY_ADDR4:
+#endif
+ is_cortina_phy = true;
+ break;
+ default:
+ break;
+ }
+
+ /* Cortina PHY has non-standard offset of PHY ID registers */
+ if (is_cortina_phy)
+ phy_reg = bus->read(bus, addr, 0, VILLA_GLOBAL_CHIP_ID_LSB);
+ else
+ phy_reg = bus->read(bus, addr, devad, MII_PHYSID1);
+
+ if (phy_reg < 0)
+ return -EIO;
+
+ *phy_id = (phy_reg & 0xffff) << 16;
+ if (is_cortina_phy)
+ phy_reg = bus->read(bus, addr, 0, VILLA_GLOBAL_CHIP_ID_MSB);
+ else
+ phy_reg = bus->read(bus, addr, devad, MII_PHYSID2);
+
+ if (phy_reg < 0)
+ return -EIO;
+
+ *phy_id |= (phy_reg & 0xffff);
+
+ return 0;
+}
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 467c972..5b04c85 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -448,6 +448,9 @@ int phy_init(void)
#ifdef CONFIG_PHY_BROADCOM
phy_broadcom_init();
#endif
+#ifdef CONFIG_PHY_CORTINA
+ phy_cortina_init();
+#endif
#ifdef CONFIG_PHY_DAVICOM
phy_davicom_init();
#endif
diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c
index 2b29cd8..20a6746 100644
--- a/drivers/net/phy/vitesse.c
+++ b/drivers/net/phy/vitesse.c
@@ -1,8 +1,8 @@
/*
* Vitesse PHY drivers
*
- * Copyright 2010-2012 Freescale Semiconductor, Inc.
- * Author: Andy Fleming
+ * Copyright 2010-2014 Freescale Semiconductor, Inc.
+ * Original Author: Andy Fleming
* Add vsc8662 phy support - Priyanka Jain
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -50,6 +50,7 @@
#define MIIM_VSC8574_18G_CMDSTAT 0x8000
/* Vitesse VSC8514 control register */
+#define MIIM_VSC8514_MAC_SERDES_CON 0x10
#define MIIM_VSC8514_GENERAL18 0x12
#define MIIM_VSC8514_GENERAL19 0x13
#define MIIM_VSC8514_GENERAL23 0x17
@@ -246,6 +247,14 @@ static int vsc8514_config(struct phy_device *phydev)
val = (val & 0xf8ff);
phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_GENERAL23, val);
+ /* Enable Serdes Auto-negotiation */
+ phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS,
+ PHY_EXT_PAGE_ACCESS_EXTENDED3);
+ val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_MAC_SERDES_CON);
+ val = val | MIIM_VSC8574_MAC_SERDES_ANEG;
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8514_MAC_SERDES_CON, val);
+ phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 0);
+
genphy_config_aneg(phydev);
return 0;
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index 55d6a9b..85e82bd 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -17,3 +17,4 @@ obj-$(CONFIG_SH7751_PCI) +=pci_sh7751.o
obj-$(CONFIG_SH7780_PCI) +=pci_sh7780.o
obj-$(CONFIG_TSI108_PCI) += tsi108_pci.o
obj-$(CONFIG_WINBOND_83C553) += w83c553f.o
+obj-$(CONFIG_PCIE_LAYERSCAPE) += pcie_layerscape.o
diff --git a/drivers/pci/pcie_layerscape.c b/drivers/pci/pcie_layerscape.c
new file mode 100644
index 0000000..291c249
--- /dev/null
+++ b/drivers/pci/pcie_layerscape.c
@@ -0,0 +1,51 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ * Layerscape PCIe driver
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/fsl_serdes.h>
+#include <pci.h>
+#include <asm/io.h>
+#include <asm/pcie_layerscape.h>
+
+#ifdef CONFIG_OF_BOARD_SETUP
+#include <libfdt.h>
+#include <fdt_support.h>
+
+static void ft_pcie_ls_setup(void *blob, const char *pci_compat,
+ unsigned long ctrl_addr, enum srds_prtcl dev)
+{
+ int off;
+
+ off = fdt_node_offset_by_compat_reg(blob, pci_compat,
+ (phys_addr_t)ctrl_addr);
+ if (off < 0)
+ return;
+
+ if (!is_serdes_configured(dev))
+ fdt_set_node_status(blob, off, FDT_STATUS_DISABLED, 0);
+}
+
+void ft_pcie_setup(void *blob, bd_t *bd)
+{
+ #ifdef CONFIG_PCIE1
+ ft_pcie_ls_setup(blob, FSL_PCIE_COMPAT, CONFIG_SYS_PCIE1_ADDR, PCIE1);
+ #endif
+
+ #ifdef CONFIG_PCIE2
+ ft_pcie_ls_setup(blob, FSL_PCIE_COMPAT, CONFIG_SYS_PCIE2_ADDR, PCIE2);
+ #endif
+}
+
+#else
+void ft_pcie_setup(void *blob, bd_t *bd)
+{
+}
+#endif
+
+void pci_init_board(void)
+{
+}
diff --git a/drivers/power/palmas.c b/drivers/power/palmas.c
index cfbc9dc..6430fe0 100644
--- a/drivers/power/palmas.c
+++ b/drivers/power/palmas.c
@@ -27,7 +27,7 @@ int palmas_mmc1_poweron_ldo(void)
{
u8 val = 0;
-#if defined(CONFIG_DRA7XX)
+#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
/*
* Currently valid for the dra7xx_evm board:
* Set TPS659038 LDO1 to 3.0 V
diff --git a/drivers/power/power_i2c.c b/drivers/power/power_i2c.c
index 594cd11..0dcf9fe 100644
--- a/drivers/power/power_i2c.c
+++ b/drivers/power/power_i2c.c
@@ -14,7 +14,7 @@
#include <linux/types.h>
#include <power/pmic.h>
#include <i2c.h>
-#include <compiler.h>
+#include <linux/compiler.h>
int pmic_reg_write(struct pmic *p, u32 reg, u32 val)
{
diff --git a/drivers/power/tps6586x.c b/drivers/power/tps6586x.c
index d29d969..29bab4c 100644
--- a/drivers/power/tps6586x.c
+++ b/drivers/power/tps6586x.c
@@ -10,9 +10,7 @@
#include <asm/io.h>
#include <i2c.h>
-static int bus_num; /* I2C bus we are on */
-#define I2C_ADDRESS 0x34 /* chip requires this address */
-static char inited; /* 1 if we have been inited */
+static struct udevice *tps6586x_dev;
enum {
/* Registers that we access */
@@ -37,13 +35,9 @@ static int tps6586x_read(int reg)
int i;
uchar data;
int retval = -1;
- int old_bus_num;
-
- old_bus_num = i2c_get_bus_num();
- i2c_set_bus_num(bus_num);
for (i = 0; i < MAX_I2C_RETRY; ++i) {
- if (!i2c_read(I2C_ADDRESS, reg, 1, &data, 1)) {
+ if (!i2c_read(tps6586x_dev, reg, &data, 1)) {
retval = (int)data;
goto exit;
}
@@ -53,7 +47,6 @@ static int tps6586x_read(int reg)
}
exit:
- i2c_set_bus_num(old_bus_num);
debug("pmu_read %x=%x\n", reg, retval);
if (retval < 0)
debug("%s: failed to read register %#x: %d\n", __func__, reg,
@@ -65,13 +58,9 @@ static int tps6586x_write(int reg, uchar *data, uint len)
{
int i;
int retval = -1;
- int old_bus_num;
-
- old_bus_num = i2c_get_bus_num();
- i2c_set_bus_num(bus_num);
for (i = 0; i < MAX_I2C_RETRY; ++i) {
- if (!i2c_write(I2C_ADDRESS, reg, 1, data, len)) {
+ if (!i2c_write(tps6586x_dev, reg, data, len)) {
retval = 0;
goto exit;
}
@@ -81,7 +70,6 @@ static int tps6586x_write(int reg, uchar *data, uint len)
}
exit:
- i2c_set_bus_num(old_bus_num);
debug("pmu_write %x=%x: ", reg, retval);
for (i = 0; i < len; i++)
debug("%x ", data[i]);
@@ -163,7 +151,7 @@ int tps6586x_set_pwm_mode(int mask)
uchar val;
int ret;
- assert(inited);
+ assert(tps6586x_dev);
ret = tps6586x_read(PFM_MODE);
if (ret != -1) {
val = (uchar)ret;
@@ -184,7 +172,7 @@ int tps6586x_adjust_sm0_sm1(int sm0_target, int sm1_target, int step, int rate,
int sm0, sm1;
int bad;
- assert(inited);
+ assert(tps6586x_dev);
/* get current voltage settings */
if (read_voltages(&sm0, &sm1)) {
@@ -255,10 +243,9 @@ int tps6586x_adjust_sm0_sm1(int sm0_target, int sm1_target, int step, int rate,
return bad ? -1 : 0;
}
-int tps6586x_init(int bus)
+int tps6586x_init(struct udevice *dev)
{
- bus_num = bus;
- inited = 1;
+ tps6586x_dev = dev;
return 0;
}
diff --git a/drivers/power/twl4030.c b/drivers/power/twl4030.c
index e578ae6..7f1fdd1 100644
--- a/drivers/power/twl4030.c
+++ b/drivers/power/twl4030.c
@@ -91,17 +91,23 @@ void twl4030_power_init(void)
TWL4030_PM_RECEIVER_DEV_GRP_P1);
}
-void twl4030_power_mmc_init(void)
+void twl4030_power_mmc_init(int dev_index)
{
- /* Set VMMC1 to 3.15 Volts */
- twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VMMC1_DEDICATED,
- TWL4030_PM_RECEIVER_VMMC1_VSEL_32,
- TWL4030_PM_RECEIVER_VMMC1_DEV_GRP,
- TWL4030_PM_RECEIVER_DEV_GRP_P1);
+ if (dev_index == 0) {
+ /* Set VMMC1 to 3.15 Volts */
+ twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VMMC1_DEDICATED,
+ TWL4030_PM_RECEIVER_VMMC1_VSEL_32,
+ TWL4030_PM_RECEIVER_VMMC1_DEV_GRP,
+ TWL4030_PM_RECEIVER_DEV_GRP_P1);
- /* Set VMMC2 to 3.15 Volts */
- twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VMMC2_DEDICATED,
- TWL4030_PM_RECEIVER_VMMC2_VSEL_32,
- TWL4030_PM_RECEIVER_VMMC2_DEV_GRP,
- TWL4030_PM_RECEIVER_DEV_GRP_P1);
+ mdelay(100); /* ramp-up delay from Linux code */
+ } else if (dev_index == 1) {
+ /* Set VMMC2 to 3.15 Volts */
+ twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VMMC2_DEDICATED,
+ TWL4030_PM_RECEIVER_VMMC2_VSEL_32,
+ TWL4030_PM_RECEIVER_VMMC2_DEV_GRP,
+ TWL4030_PM_RECEIVER_DEV_GRP_P1);
+
+ mdelay(100); /* ramp-up delay from Linux code */
+ }
}
diff --git a/drivers/rtc/mvrtc.h b/drivers/rtc/mvrtc.h
index ebddc12..424743c 100644
--- a/drivers/rtc/mvrtc.h
+++ b/drivers/rtc/mvrtc.h
@@ -13,7 +13,7 @@
#define _MVRTC_H_
#include <asm/arch/soc.h>
-#include <compiler.h>
+#include <linux/compiler.h>
/* RTC registers */
struct mvrtc_registers {
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index 8f05191..af5beba 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -132,11 +132,12 @@ static void NS16550_setbrg(NS16550_t com_port, int baud_divisor)
void NS16550_init(NS16550_t com_port, int baud_divisor)
{
-#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_OMAP34XX))
+#if (defined(CONFIG_SPL_BUILD) && \
+ (defined(CONFIG_OMAP34XX) || defined(CONFIG_OMAP44XX)))
/*
- * On some OMAP3 devices when UART3 is configured for boot mode before
- * SPL starts only THRE bit is set. We have to empty the transmitter
- * before initialization starts.
+ * On some OMAP3/OMAP4 devices when UART3 is configured for boot mode
+ * before SPL starts only THRE bit is set. We have to empty the
+ * transmitter before initialization starts.
*/
if ((serial_in(&com_port->lsr) & (UART_LSR_TEMT | UART_LSR_THRE))
== UART_LSR_THRE) {
diff --git a/drivers/serial/serial_pl01x.c b/drivers/serial/serial_pl01x.c
index 38dda91..75eb6bd 100644
--- a/drivers/serial/serial_pl01x.c
+++ b/drivers/serial/serial_pl01x.c
@@ -72,30 +72,39 @@ static int pl01x_tstc(struct pl01x_regs *regs)
static int pl01x_generic_serial_init(struct pl01x_regs *regs,
enum pl01x_type type)
{
- unsigned int lcr;
-
+ switch (type) {
+ case TYPE_PL010:
+ /* disable everything */
+ writel(0, &regs->pl010_cr);
+ break;
+ case TYPE_PL011:
#ifdef CONFIG_PL011_SERIAL_FLUSH_ON_INIT
- if (type == TYPE_PL011) {
/* Empty RX fifo if necessary */
if (readl(&regs->pl011_cr) & UART_PL011_CR_UARTEN) {
while (!(readl(&regs->fr) & UART_PL01x_FR_RXFE))
readl(&regs->dr);
}
- }
#endif
+ /* disable everything */
+ writel(0, &regs->pl011_cr);
+ break;
+ default:
+ return -EINVAL;
+ }
- /* First, disable everything */
- writel(0, &regs->pl010_cr);
+ return 0;
+}
- /* Set the UART to be 8 bits, 1 stop bit, no parity, fifo enabled */
+static int set_line_control(struct pl01x_regs *regs)
+{
+ unsigned int lcr;
+ /*
+ * Internal update of baud rate register require line
+ * control register write
+ */
lcr = UART_PL011_LCRH_WLEN_8 | UART_PL011_LCRH_FEN;
- writel(lcr, &regs->pl011_lcrh);
-
- switch (type) {
- case TYPE_PL010:
- break;
- case TYPE_PL011: {
#ifdef CONFIG_PL011_SERIAL_RLCR
+ {
int i;
/*
@@ -107,15 +116,9 @@ static int pl01x_generic_serial_init(struct pl01x_regs *regs,
writel(lcr, &regs->fr);
writel(lcr, &regs->pl011_rlcr);
- /* lcrh needs to be set again for change to be effective */
- writel(lcr, &regs->pl011_lcrh);
-#endif
- break;
- }
- default:
- return -EINVAL;
}
-
+#endif
+ writel(lcr, &regs->pl011_lcrh);
return 0;
}
@@ -175,6 +178,7 @@ static int pl01x_generic_setbrg(struct pl01x_regs *regs, enum pl01x_type type,
writel(divider, &regs->pl011_ibrd);
writel(fraction, &regs->pl011_fbrd);
+ set_line_control(regs);
/* Finally, enable the UART */
writel(UART_PL011_CR_UARTEN | UART_PL011_CR_TXE |
UART_PL011_CR_RXE | UART_PL011_CR_RTS, &regs->pl011_cr);
@@ -201,7 +205,7 @@ static void pl01x_serial_init_baud(int baudrate)
base_regs = (struct pl01x_regs *)port[CONFIG_CONS_INDEX];
pl01x_generic_serial_init(base_regs, pl01x_type);
- pl01x_generic_setbrg(base_regs, TYPE_PL010, clock, baudrate);
+ pl01x_generic_setbrg(base_regs, pl01x_type, clock, baudrate);
}
/*
@@ -344,6 +348,7 @@ U_BOOT_DRIVER(serial_pl01x) = {
.probe = pl01x_serial_probe,
.ops = &pl01x_serial_ops,
.flags = DM_FLAG_PRE_RELOC,
+ .priv_auto_alloc_size = sizeof(struct pl01x_priv),
};
#endif
diff --git a/drivers/spi/ich.c b/drivers/spi/ich.c
index f5c6f3e..0379444 100644
--- a/drivers/spi/ich.c
+++ b/drivers/spi/ich.c
@@ -141,6 +141,15 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
ich->slave.max_write_size = ctlr.databytes;
ich->speed = max_hz;
+ /*
+ * ICH 7 SPI controller only supports array read command
+ * and byte program command for SST flash
+ */
+ if (ctlr.ich_version == 7) {
+ ich->slave.op_mode_rx = SPI_OPM_RX_AS;
+ ich->slave.op_mode_tx = SPI_OPM_TX_BP;
+ }
+
return &ich->slave;
}
@@ -158,7 +167,8 @@ void spi_free_slave(struct spi_slave *slave)
*/
static int get_ich_version(uint16_t device_id)
{
- if (device_id == PCI_DEVICE_ID_INTEL_TGP_LPC)
+ if (device_id == PCI_DEVICE_ID_INTEL_TGP_LPC ||
+ device_id == PCI_DEVICE_ID_INTEL_ITC_LPC)
return 7;
if ((device_id >= PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MIN &&
@@ -483,8 +493,6 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
struct spi_trans *trans = &ich->trans;
unsigned type = flags & (SPI_XFER_BEGIN | SPI_XFER_END);
int using_cmd = 0;
- /* Align read transactions to 64-byte boundaries */
- char buff[ctlr.databytes];
/* Ee don't support writing partial bytes. */
if (bitlen % 8) {
@@ -632,14 +640,9 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
*/
while (trans->bytesout || trans->bytesin) {
uint32_t data_length;
- uint32_t aligned_offset;
- uint32_t diff;
-
- aligned_offset = trans->offset & ~(ctlr.databytes - 1);
- diff = trans->offset - aligned_offset;
/* SPI addresses are 24 bit only */
- ich_writel(aligned_offset & 0x00FFFFFF, ctlr.addr);
+ ich_writel(trans->offset & 0x00FFFFFF, ctlr.addr);
if (trans->bytesout)
data_length = min(trans->bytesout, ctlr.databytes);
@@ -673,13 +676,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
}
if (trans->bytesin) {
- if (diff) {
- data_length -= diff;
- read_reg(ctlr.data, buff, ctlr.databytes);
- memcpy(trans->in, buff + diff, data_length);
- } else {
- read_reg(ctlr.data, trans->in, data_length);
- }
+ read_reg(ctlr.data, trans->in, data_length);
spi_use_in(trans, data_length);
if (with_address)
trans->offset += data_length;
diff --git a/drivers/spi/ti_qspi.c b/drivers/spi/ti_qspi.c
index fd7fea8..857b604 100644
--- a/drivers/spi/ti_qspi.c
+++ b/drivers/spi/ti_qspi.c
@@ -102,7 +102,7 @@ static void ti_spi_setup_spi_register(struct ti_qspi_slave *qslave)
struct spi_slave *slave = &qslave->slave;
u32 memval = 0;
-#ifdef CONFIG_DRA7XX
+#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
slave->memory_map = (void *)MMAP_START_ADDR_DRA;
#else
slave->memory_map = (void *)MMAP_START_ADDR_AM43x;
@@ -244,7 +244,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
uint status;
int timeout;
-#ifdef CONFIG_DRA7XX
+#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
int val;
#endif
@@ -254,7 +254,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
/* Setup mmap flags */
if (flags & SPI_XFER_MMAP) {
writel(MM_SWITCH, &qslave->base->memswitch);
-#ifdef CONFIG_DRA7XX
+#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
val = readl(CORE_CTRL_IO);
val |= MEM_CS;
writel(val, CORE_CTRL_IO);
@@ -262,7 +262,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
return 0;
} else if (flags & SPI_XFER_MMAP_END) {
writel(~MM_SWITCH, &qslave->base->memswitch);
-#ifdef CONFIG_DRA7XX
+#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
val = readl(CORE_CTRL_IO);
val &= MEM_CS_UNSELECT;
writel(val, CORE_CTRL_IO);
diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
index 1161585..0bd9cfd 100644
--- a/drivers/thermal/imx_thermal.c
+++ b/drivers/thermal/imx_thermal.c
@@ -156,8 +156,6 @@ static int imx_thermal_probe(struct udevice *dev)
if (fuse == 0 || fuse == ~0) {
printf("CPU: Thermal invalid data, fuse: 0x%x\n", fuse);
return -EPERM;
- } else {
- printf("CPU: Thermal calibration data: 0x%x\n", fuse);
}
*priv = fuse;
diff --git a/drivers/tpm/tpm.c b/drivers/tpm/tpm.c
index bc0f964..31761ec 100644
--- a/drivers/tpm/tpm.c
+++ b/drivers/tpm/tpm.c
@@ -34,7 +34,7 @@
#include <config.h>
#include <common.h>
-#include <compiler.h>
+#include <linux/compiler.h>
#include <fdtdec.h>
#include <i2c.h>
#include <tpm.h>
diff --git a/drivers/tpm/tpm_tis_i2c.c b/drivers/tpm/tpm_tis_i2c.c
index 2dd8501..c1bbed4 100644
--- a/drivers/tpm/tpm_tis_i2c.c
+++ b/drivers/tpm/tpm_tis_i2c.c
@@ -38,7 +38,7 @@
#include <common.h>
#include <fdtdec.h>
-#include <compiler.h>
+#include <linux/compiler.h>
#include <i2c.h>
#include <tpm.h>
#include <asm-generic/errno.h>
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index d0dd29f..ba442d5 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -852,30 +852,6 @@ DEFINE_CACHE_ALIGN_BUFFER(u8, control_req, USB_BUFSIZ);
DEFINE_CACHE_ALIGN_BUFFER(u8, status_req, STATUS_BYTECOUNT);
#endif
-
-/**
- * strlcpy - Copy a %NUL terminated string into a sized buffer
- * @dest: Where to copy the string to
- * @src: Where to copy the string from
- * @size: size of destination buffer
- *
- * Compatible with *BSD: the result is always a valid
- * NUL-terminated string that fits in the buffer (unless,
- * of course, the buffer size is zero). It does not pad
- * out the result like strncpy() does.
- */
-size_t strlcpy(char *dest, const char *src, size_t size)
-{
- size_t ret = strlen(src);
-
- if (size) {
- size_t len = (ret >= size) ? size - 1 : ret;
- memcpy(dest, src, len);
- dest[len] = '\0';
- }
- return ret;
-}
-
/*============================================================================*/
/*
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 8f55464..5d4288d 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -15,9 +15,14 @@
#include <usb/ehci-fsl.h>
#include <hwconfig.h>
#include <fsl_usb.h>
+#include <fdt_support.h>
#include "ehci.h"
+#ifndef CONFIG_USB_MAX_CONTROLLER_COUNT
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
+#endif
+
static void set_txfifothresh(struct usb_ehci *, u32);
/* Check USB PHY clock valid */
@@ -158,3 +163,184 @@ static void set_txfifothresh(struct usb_ehci *ehci, u32 txfifo_thresh)
cmd |= TXFIFO_THRESH(txfifo_thresh);
ehci_writel(&ehci->txfilltuning, cmd);
}
+
+#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
+static int fdt_fixup_usb_mode_phy_type(void *blob, const char *mode,
+ const char *phy_type, int start_offset)
+{
+ const char *compat_dr = "fsl-usb2-dr";
+ const char *compat_mph = "fsl-usb2-mph";
+ const char *prop_mode = "dr_mode";
+ const char *prop_type = "phy_type";
+ const char *node_type = NULL;
+ int node_offset;
+ int err;
+
+ node_offset = fdt_node_offset_by_compatible(blob,
+ start_offset, compat_mph);
+ if (node_offset < 0) {
+ node_offset = fdt_node_offset_by_compatible(blob,
+ start_offset,
+ compat_dr);
+ if (node_offset < 0) {
+ printf("WARNING: could not find compatible node: %s",
+ fdt_strerror(node_offset));
+ return -1;
+ }
+ node_type = compat_dr;
+ } else {
+ node_type = compat_mph;
+ }
+
+ if (mode) {
+ err = fdt_setprop(blob, node_offset, prop_mode, mode,
+ strlen(mode) + 1);
+ if (err < 0)
+ printf("WARNING: could not set %s for %s: %s.\n",
+ prop_mode, node_type, fdt_strerror(err));
+ }
+
+ if (phy_type) {
+ err = fdt_setprop(blob, node_offset, prop_type, phy_type,
+ strlen(phy_type) + 1);
+ if (err < 0)
+ printf("WARNING: could not set %s for %s: %s.\n",
+ prop_type, node_type, fdt_strerror(err));
+ }
+
+ return node_offset;
+}
+
+static const char *fdt_usb_get_node_type(void *blob, int start_offset,
+ int *node_offset)
+{
+ const char *compat_dr = "fsl-usb2-dr";
+ const char *compat_mph = "fsl-usb2-mph";
+ const char *node_type = NULL;
+
+ *node_offset = fdt_node_offset_by_compatible(blob, start_offset,
+ compat_mph);
+ if (*node_offset < 0) {
+ *node_offset = fdt_node_offset_by_compatible(blob,
+ start_offset,
+ compat_dr);
+ if (*node_offset < 0) {
+ printf("ERROR: could not find compatible node: %s\n",
+ fdt_strerror(*node_offset));
+ } else {
+ node_type = compat_dr;
+ }
+ } else {
+ node_type = compat_mph;
+ }
+
+ return node_type;
+}
+
+static int fdt_fixup_usb_erratum(void *blob, const char *prop_erratum,
+ int start_offset)
+{
+ int node_offset, err;
+ const char *node_type = NULL;
+
+ node_type = fdt_usb_get_node_type(blob, start_offset, &node_offset);
+ if (!node_type)
+ return -1;
+
+ err = fdt_setprop(blob, node_offset, prop_erratum, NULL, 0);
+ if (err < 0) {
+ printf("ERROR: could not set %s for %s: %s.\n",
+ prop_erratum, node_type, fdt_strerror(err));
+ }
+
+ return node_offset;
+}
+
+void fdt_fixup_dr_usb(void *blob, bd_t *bd)
+{
+ static const char * const modes[] = { "host", "peripheral", "otg" };
+ static const char * const phys[] = { "ulpi", "utmi" };
+ int usb_erratum_a006261_off = -1;
+ int usb_erratum_a007075_off = -1;
+ int usb_erratum_a007792_off = -1;
+ int usb_mode_off = -1;
+ int usb_phy_off = -1;
+ char str[5];
+ int i, j;
+
+ for (i = 1; i <= CONFIG_USB_MAX_CONTROLLER_COUNT; i++) {
+ const char *dr_mode_type = NULL;
+ const char *dr_phy_type = NULL;
+ int mode_idx = -1, phy_idx = -1;
+
+ snprintf(str, 5, "%s%d", "usb", i);
+ if (hwconfig(str)) {
+ for (j = 0; j < ARRAY_SIZE(modes); j++) {
+ if (hwconfig_subarg_cmp(str, "dr_mode",
+ modes[j])) {
+ mode_idx = j;
+ break;
+ }
+ }
+
+ for (j = 0; j < ARRAY_SIZE(phys); j++) {
+ if (hwconfig_subarg_cmp(str, "phy_type",
+ phys[j])) {
+ phy_idx = j;
+ break;
+ }
+ }
+
+ if (mode_idx < 0 && phy_idx < 0) {
+ printf("WARNING: invalid phy or mode\n");
+ return;
+ }
+
+ if (mode_idx > -1)
+ dr_mode_type = modes[mode_idx];
+
+ if (phy_idx > -1)
+ dr_phy_type = phys[phy_idx];
+ }
+
+ usb_mode_off = fdt_fixup_usb_mode_phy_type(blob,
+ dr_mode_type, NULL,
+ usb_mode_off);
+
+ if (usb_mode_off < 0)
+ return;
+
+ usb_phy_off = fdt_fixup_usb_mode_phy_type(blob,
+ NULL, dr_phy_type,
+ usb_phy_off);
+
+ if (usb_phy_off < 0)
+ return;
+
+ if (has_erratum_a006261()) {
+ usb_erratum_a006261_off = fdt_fixup_usb_erratum
+ (blob,
+ "fsl,usb-erratum-a006261",
+ usb_erratum_a006261_off);
+ if (usb_erratum_a006261_off < 0)
+ return;
+ }
+ if (has_erratum_a007075()) {
+ usb_erratum_a007075_off = fdt_fixup_usb_erratum
+ (blob,
+ "fsl,usb-erratum-a007075",
+ usb_erratum_a007075_off);
+ if (usb_erratum_a007075_off < 0)
+ return;
+ }
+ if (has_erratum_a007792()) {
+ usb_erratum_a007792_off = fdt_fixup_usb_erratum
+ (blob,
+ "fsl,usb-erratum-a007792",
+ usb_erratum_a007792_off);
+ if (usb_erratum_a007792_off < 0)
+ return;
+ }
+ }
+}
+#endif
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 5520805..bc76066 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -971,7 +971,6 @@ int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
qh_list->qh_link = cpu_to_hc32((uint32_t)qh_list | QH_LINK_TYPE_QH);
qh_list->qh_endpt1 = cpu_to_hc32(QH_ENDPT1_H(1) |
QH_ENDPT1_EPS(USB_SPEED_HIGH));
- qh_list->qh_curtd = cpu_to_hc32(QT_NEXT_TERMINATE);
qh_list->qh_overlay.qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
qh_list->qh_overlay.qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE);
qh_list->qh_overlay.qt_token =
diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c
index 9ec5a0a..951dd3b 100644
--- a/drivers/usb/host/ehci-mx6.c
+++ b/drivers/usb/host/ehci-mx6.c
@@ -160,7 +160,7 @@ static int usb_phy_enable(int index, struct usb_ehci *ehci)
val |= (USBPHY_CTRL_ENUTMILEVEL2 | USBPHY_CTRL_ENUTMILEVEL3);
__raw_writel(val, phy_ctrl);
- return val & USBPHY_CTRL_OTG_ID;
+ return 0;
}
/* Base address for this IP block is 0x02184800 */
@@ -193,6 +193,28 @@ static void usb_oc_config(int index)
__raw_writel(val, ctrl);
}
+int usb_phy_mode(int port)
+{
+ void __iomem *phy_reg;
+ void __iomem *phy_ctrl;
+ u32 val;
+
+ phy_reg = (void __iomem *)phy_bases[port];
+ phy_ctrl = (void __iomem *)(phy_reg + USBPHY_CTRL);
+
+ val = __raw_readl(phy_ctrl);
+
+ if (val & USBPHY_CTRL_OTG_ID)
+ return USB_INIT_DEVICE;
+ else
+ return USB_INIT_HOST;
+}
+
+int __weak board_usb_phy_mode(int port)
+{
+ return usb_phy_mode(port);
+}
+
int __weak board_ehci_hcd_init(int port)
{
return 0;
@@ -221,7 +243,8 @@ int ehci_hcd_init(int index, enum usb_init_type init,
usb_power_config(index);
usb_oc_config(index);
usb_internal_phy_clock_gate(index, 1);
- type = usb_phy_enable(index, ehci) ? USB_INIT_DEVICE : USB_INIT_HOST;
+ usb_phy_enable(index, ehci);
+ type = board_usb_phy_mode(index);
*hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
*hcor = (struct ehci_hcor *)((uint32_t)*hccr +
diff --git a/drivers/usb/phy/omap_usb_phy.c b/drivers/usb/phy/omap_usb_phy.c
index f78d532..52a3664 100644
--- a/drivers/usb/phy/omap_usb_phy.c
+++ b/drivers/usb/phy/omap_usb_phy.c
@@ -118,7 +118,6 @@ void usb_phy_power(int on)
void omap_usb3_phy_init(struct omap_usb3_phy *phy_regs)
{
omap_usb_dpll_lock(phy_regs);
-
usb3_phy_partial_powerup(phy_regs);
/*
* Give enough time for the PHY to partially power-up before
@@ -126,7 +125,6 @@ void omap_usb3_phy_init(struct omap_usb3_phy *phy_regs)
* team.
*/
mdelay(100);
- usb3_phy_power(1);
}
static void omap_enable_usb3_phy(struct omap_xhci *omap)
diff --git a/include/common.h b/include/common.h
index 94c354b..80c3486 100644
--- a/include/common.h
+++ b/include/common.h
@@ -70,12 +70,6 @@ typedef volatile unsigned char vu_char;
#ifdef CONFIG_4xx
#include <asm/ppc4xx.h>
#endif
-#ifdef CONFIG_ARM
-#define asmlinkage /* nothing */
-#endif
-#ifdef CONFIG_X86
-#define asmlinkage __attribute__((regparm(0)))
-#endif
#ifdef CONFIG_BLACKFIN
#include <asm/blackfin.h>
#endif
@@ -445,11 +439,6 @@ extern ssize_t spi_read (uchar *, int, uchar *, int);
extern ssize_t spi_write (uchar *, int, uchar *, int);
#endif
-#ifdef CONFIG_HERMES
-/* $(BOARD)/hermes.c */
-void hermes_start_lxt980 (int speed);
-#endif
-
#ifdef CONFIG_EVB64260
void evb64260_init(void);
void debug_led(int, int);
diff --git a/include/commproc.h b/include/commproc.h
index d78ab00..6875c4c 100644
--- a/include/commproc.h
+++ b/include/commproc.h
@@ -535,34 +535,6 @@ typedef struct scc_enet {
#define SICR_ENET_CLKRT ((uint)0x00002600)
#endif /* CONFIG_FPS850L, CONFIG_FPS860L */
-/*** HERMES-PRO ******************************************************/
-
-/* The HERMES-PRO uses the FEC on a MPC860T for Ethernet */
-
-#ifdef CONFIG_HERMES
-
-#define FEC_ENET /* use FEC for EThernet */
-#undef SCC_ENET
-
-
-#define PD_MII_TXD1 ((ushort)0x1000) /* PD 3 */
-#define PD_MII_TXD2 ((ushort)0x0800) /* PD 4 */
-#define PD_MII_TXD3 ((ushort)0x0400) /* PD 5 */
-#define PD_MII_RX_DV ((ushort)0x0200) /* PD 6 */
-#define PD_MII_RX_ERR ((ushort)0x0100) /* PD 7 */
-#define PD_MII_RX_CLK ((ushort)0x0080) /* PD 8 */
-#define PD_MII_TXD0 ((ushort)0x0040) /* PD 9 */
-#define PD_MII_RXD0 ((ushort)0x0020) /* PD 10 */
-#define PD_MII_TX_ERR ((ushort)0x0010) /* PD 11 */
-#define PD_MII_MDC ((ushort)0x0008) /* PD 12 */
-#define PD_MII_RXD1 ((ushort)0x0004) /* PD 13 */
-#define PD_MII_RXD2 ((ushort)0x0002) /* PD 14 */
-#define PD_MII_RXD3 ((ushort)0x0001) /* PD 15 */
-
-#define PD_MII_MASK ((ushort)0x1FFF) /* PD 3...15 */
-
-#endif /* CONFIG_HERMES */
-
/*** IP860 **********************************************************/
#if defined(CONFIG_IP860)
diff --git a/include/config_fallbacks.h b/include/config_fallbacks.h
index 7d8daa2..ddfe045 100644
--- a/include/config_fallbacks.h
+++ b/include/config_fallbacks.h
@@ -79,6 +79,10 @@
#define CONFIG_SYS_PROMPT "=> "
#endif
+#ifndef CONFIG_SYS_PBSIZE
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + 128)
+#endif
+
#ifndef CONFIG_FIT_SIGNATURE
#define CONFIG_IMAGE_FORMAT_LEGACY
#endif
@@ -87,4 +91,10 @@
#undef CONFIG_IMAGE_FORMAT_LEGACY
#endif
+#ifdef CONFIG_DM_I2C
+# ifdef CONFIG_SYS_I2C
+# error "Cannot define CONFIG_SYS_I2C when CONFIG_DM_I2C is used"
+# endif
+#endif
+
#endif /* __CONFIG_FALLBACKS_H */
diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h
index dc1a9bc..9e8e319 100644
--- a/include/configs/B4860QDS.h
+++ b/include/configs/B4860QDS.h
@@ -713,8 +713,8 @@ unsigned long get_board_ddr_clk(void);
#endif /* CONFIG_PCI */
#ifdef CONFIG_FMAN_ENET
-#define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR 0x10
-#define CONFIG_SYS_FM1_DTSEC6_PHY_ADDR 0x11
+#define CONFIG_SYS_FM1_ONBOARD_PHY1_ADDR 0x10
+#define CONFIG_SYS_FM1_ONBOARD_PHY2_ADDR 0x11
/*B4860 QDS AMC2PEX-2S default PHY_ADDR */
#define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 0x7 /*SLOT 1*/
@@ -731,6 +731,8 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */
#endif
+#define CONFIG_SYS_FSL_B4860QDS_XFI_ERR
+
/*
* Environment
*/
diff --git a/include/configs/C29XPCIE.h b/include/configs/C29XPCIE.h
index 5d11278..ecb3d7b 100644
--- a/include/configs/C29XPCIE.h
+++ b/include/configs/C29XPCIE.h
@@ -12,6 +12,8 @@
#define __CONFIG_H
#define CONFIG_PHYS_64BIT
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_DISPLAY_BOARDINFO
#ifdef CONFIG_C29XPCIE
#define CONFIG_PPC_C29X
diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
index d378dbd..cd6a39c 100644
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -14,6 +14,8 @@
#ifdef CONFIG_36BIT
#define CONFIG_PHYS_64BIT
#endif
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_P1010
#define CONFIG_E500 /* BOOKE e500 family */
diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h
index bd08090..4371110 100644
--- a/include/configs/P1022DS.h
+++ b/include/configs/P1022DS.h
@@ -11,6 +11,9 @@
#include "../board/freescale/common/ics307_clk.h"
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_DISPLAY_BOARDINFO
+
#ifdef CONFIG_36BIT
#define CONFIG_PHYS_64BIT
#endif
diff --git a/include/configs/P1023RDB.h b/include/configs/P1023RDB.h
index 6b29add..2ce186e 100644
--- a/include/configs/P1023RDB.h
+++ b/include/configs/P1023RDB.h
@@ -10,6 +10,9 @@
#ifndef __CONFIG_H
#define __CONFIG_H
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_DISPLAY_BOARDINFO
+
#ifndef CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_TEXT_BASE 0xeff40000
#endif
diff --git a/include/configs/P5040DS.h b/include/configs/P5040DS.h
index 371485f..e4a031a 100644
--- a/include/configs/P5040DS.h
+++ b/include/configs/P5040DS.h
@@ -17,6 +17,7 @@
#define CONFIG_MMC
#define CONFIG_NAND_FSL_ELBC
#define CONFIG_PCIE3
+#define CONFIG_FSL_SATA_V2
#define CONFIG_SYS_FSL_RAID_ENGINE
#define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */
diff --git a/include/configs/T102xQDS.h b/include/configs/T102xQDS.h
new file mode 100644
index 0000000..78ed243
--- /dev/null
+++ b/include/configs/T102xQDS.h
@@ -0,0 +1,939 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/*
+ * T1024/T1023 QDS board configuration file
+ */
+
+#ifndef __T1024QDS_H
+#define __T1024QDS_H
+
+/* High Level Configuration Options */
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_BOOKE
+#define CONFIG_E500 /* BOOKE e500 family */
+#define CONFIG_E500MC /* BOOKE e500mc family */
+#define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */
+#define CONFIG_MP /* support multiple processors */
+#define CONFIG_PHYS_64BIT
+#define CONFIG_ENABLE_36BIT_PHYS
+
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_ADDR_MAP 1
+#define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */
+#endif
+
+#define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */
+#define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS
+#define CONFIG_FSL_IFC /* Enable IFC Support */
+
+#define CONFIG_FSL_LAW /* Use common FSL init code */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_DEEP_SLEEP
+#define CONFIG_SILENT_CONSOLE
+
+#ifdef CONFIG_RAMBOOT_PBL
+#define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xqds/t1024_pbi.cfg
+#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xqds/t1024_rcw.cfg
+#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
+#define CONFIG_SPL_ENV_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_FLUSH_IMAGE
+#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
+#define CONFIG_FSL_LAW /* Use common FSL init code */
+#define CONFIG_SYS_TEXT_BASE 0x00201000
+#define CONFIG_SPL_TEXT_BASE 0xFFFD8000
+#define CONFIG_SPL_PAD_TO 0x40000
+#define CONFIG_SPL_MAX_SIZE 0x28000
+#define RESET_VECTOR_OFFSET 0x27FFC
+#define BOOT_PAGE_OFFSET 0x27000
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SPL_SKIP_RELOCATE
+#define CONFIG_SPL_COMMON_INIT_DDR
+#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
+#define CONFIG_SYS_NO_FLASH
+#endif
+
+#ifdef CONFIG_NAND
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10)
+#define CONFIG_SYS_NAND_U_BOOT_DST 0x00200000
+#define CONFIG_SYS_NAND_U_BOOT_START 0x00200000
+#define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10)
+#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
+#define CONFIG_SPL_NAND_BOOT
+#endif
+
+#ifdef CONFIG_SPIFLASH
+#define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC
+#define CONFIG_SPL_SPI_SUPPORT
+#define CONFIG_SPL_SPI_FLASH_SUPPORT
+#define CONFIG_SPL_SPI_FLASH_MINIMAL
+#define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10)
+#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x00200000)
+#define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x00200000)
+#define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (256 << 10)
+#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds"
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_SYS_MPC85XX_NO_RESETVEC
+#endif
+#define CONFIG_SPL_SPI_BOOT
+#endif
+
+#ifdef CONFIG_SDCARD
+#define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_MMC_MINIMAL
+#define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10)
+#define CONFIG_SYS_MMC_U_BOOT_DST (0x00200000)
+#define CONFIG_SYS_MMC_U_BOOT_START (0x00200000)
+#define CONFIG_SYS_MMC_U_BOOT_OFFS (260 << 10)
+#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds"
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_SYS_MPC85XX_NO_RESETVEC
+#endif
+#define CONFIG_SPL_MMC_BOOT
+#endif
+
+#endif /* CONFIG_RAMBOOT_PBL */
+
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE 0xeff40000
+#endif
+
+#ifndef CONFIG_RESET_VECTOR_ADDRESS
+#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc
+#endif
+
+#ifndef CONFIG_SYS_NO_FLASH
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#endif
+
+/* PCIe Boot - Master */
+#define CONFIG_SRIO_PCIE_BOOT_MASTER
+/*
+ * for slave u-boot IMAGE instored in master memory space,
+ * PHYS must be aligned based on the SIZE
+ */
+#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
+#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
+#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
+#else
+#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xef200000
+#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0xfff00000
+#endif
+/*
+ * for slave UCODE and ENV instored in master memory space,
+ * PHYS must be aligned based on the SIZE
+ */
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
+#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
+#else
+#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xef100000
+#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0xffe00000
+#endif
+#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */
+/* slave core release by master*/
+#define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
+#define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
+
+/* PCIe Boot - Slave */
+#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
+#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
+#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
+ (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
+/* Set 1M boot space for PCIe boot */
+#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
+#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
+ (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
+#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
+#define CONFIG_SYS_NO_FLASH
+#endif
+
+#if defined(CONFIG_SPIFLASH)
+#define CONFIG_SYS_EXTRA_ENV_RELOC
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SPI_BUS 0
+#define CONFIG_ENV_SPI_CS 0
+#define CONFIG_ENV_SPI_MAX_HZ 10000000
+#define CONFIG_ENV_SPI_MODE 0
+#define CONFIG_ENV_SIZE 0x2000 /* 8KB */
+#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */
+#define CONFIG_ENV_SECT_SIZE 0x10000
+#elif defined(CONFIG_SDCARD)
+#define CONFIG_SYS_EXTRA_ENV_RELOC
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#define CONFIG_ENV_SIZE 0x2000
+#define CONFIG_ENV_OFFSET (512 * 0x800)
+#elif defined(CONFIG_NAND)
+#define CONFIG_SYS_EXTRA_ENV_RELOC
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_SIZE 0x2000
+#define CONFIG_ENV_OFFSET (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
+#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
+#define CONFIG_ENV_IS_IN_REMOTE
+#define CONFIG_ENV_ADDR 0xffe20000
+#define CONFIG_ENV_SIZE 0x2000
+#elif defined(CONFIG_ENV_IS_NOWHERE)
+#define CONFIG_ENV_SIZE 0x2000
+#else
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE 0x2000
+#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
+#endif
+
+
+#ifndef __ASSEMBLY__
+unsigned long get_board_sys_clk(void);
+unsigned long get_board_ddr_clk(void);
+#endif
+
+#define CONFIG_SYS_CLK_FREQ get_board_sys_clk()
+#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk()
+
+/*
+ * These can be toggled for performance analysis, otherwise use default.
+ */
+#define CONFIG_SYS_CACHE_STASHING
+#define CONFIG_BACKSIDE_L2_CACHE
+#define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E
+#define CONFIG_BTB /* toggle branch predition */
+#define CONFIG_DDR_ECC
+#ifdef CONFIG_DDR_ECC
+#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
+#define CONFIG_MEM_INIT_VALUE 0xdeadbeef
+#endif
+
+#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0x00400000
+#define CONFIG_SYS_ALT_MEMTEST
+#define CONFIG_PANIC_HANG /* do not reset board on panic */
+
+/*
+ * Config the L3 Cache as L3 SRAM
+ */
+#define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000
+#define CONFIG_SYS_L3_SIZE (256 << 10)
+#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
+#ifdef CONFIG_RAMBOOT_PBL
+#define CONFIG_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024)
+#endif
+#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SPL_GD_ADDR + 12 * 1024)
+#define CONFIG_SPL_RELOC_MALLOC_SIZE (30 << 10)
+#define CONFIG_SPL_RELOC_STACK (CONFIG_SPL_GD_ADDR + 64 * 1024)
+#define CONFIG_SPL_RELOC_STACK_SIZE (22 << 10)
+
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_DCSRBAR 0xf0000000
+#define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull
+#endif
+
+/* EEPROM */
+#define CONFIG_ID_EEPROM
+#define CONFIG_SYS_I2C_EEPROM_NXID
+#define CONFIG_SYS_EEPROM_BUS_NUM 0
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
+
+/*
+ * DDR Setup
+ */
+#define CONFIG_VERY_BIG_RAM
+#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
+#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
+#define CONFIG_DIMM_SLOTS_PER_CTLR 1
+#define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
+#define CONFIG_DDR_SPD
+#ifndef CONFIG_SYS_FSL_DDR4
+#define CONFIG_SYS_FSL_DDR3
+#endif
+
+#define CONFIG_SYS_SPD_BUS_NUM 0
+#define SPD_EEPROM_ADDRESS 0x51
+
+#define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */
+
+/*
+ * IFC Definitions
+ */
+#define CONFIG_SYS_FLASH_BASE 0xe0000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
+#else
+#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
+#endif
+
+#define CONFIG_SYS_NOR0_CSPR_EXT (0xf)
+#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
+ + 0x8000000) | \
+ CSPR_PORT_SIZE_16 | \
+ CSPR_MSEL_NOR | \
+ CSPR_V)
+#define CONFIG_SYS_NOR1_CSPR_EXT (0xf)
+#define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
+ CSPR_PORT_SIZE_16 | \
+ CSPR_MSEL_NOR | \
+ CSPR_V)
+#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024)
+/* NOR Flash Timing Params */
+#define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80
+#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \
+ FTIM0_NOR_TEADC(0x5) | \
+ FTIM0_NOR_TEAHC(0x5))
+#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \
+ FTIM1_NOR_TRAD_NOR(0x1A) |\
+ FTIM1_NOR_TSEQRAD_NOR(0x13))
+#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \
+ FTIM2_NOR_TCH(0x4) | \
+ FTIM2_NOR_TWPH(0x0E) | \
+ FTIM2_NOR_TWP(0x1c))
+#define CONFIG_SYS_NOR_FTIM3 0x0
+
+#define CONFIG_SYS_FLASH_QUIET_TEST
+#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
+
+#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */
+#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
+
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \
+ + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
+#define CONFIG_FSL_QIXIS /* use common QIXIS code */
+#define QIXIS_BASE 0xffdf0000
+#ifdef CONFIG_PHYS_64BIT
+#define QIXIS_BASE_PHYS (0xf00000000ull | QIXIS_BASE)
+#else
+#define QIXIS_BASE_PHYS QIXIS_BASE
+#endif
+#define QIXIS_LBMAP_SWITCH 0x06
+#define QIXIS_LBMAP_MASK 0x0f
+#define QIXIS_LBMAP_SHIFT 0
+#define QIXIS_LBMAP_DFLTBANK 0x00
+#define QIXIS_LBMAP_ALTBANK 0x04
+#define QIXIS_RST_CTL_RESET 0x31
+#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20
+#define QIXIS_RCFG_CTL_RECONFIG_START 0x21
+#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08
+#define QIXIS_RST_FORCE_MEM 0x01
+
+#define CONFIG_SYS_CSPR3_EXT (0xf)
+#define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
+ | CSPR_PORT_SIZE_8 \
+ | CSPR_MSEL_GPCM \
+ | CSPR_V)
+#define CONFIG_SYS_AMASK3 IFC_AMASK(4*1024)
+#define CONFIG_SYS_CSOR3 0x0
+/* QIXIS Timing parameters for IFC CS3 */
+#define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \
+ FTIM0_GPCM_TEADC(0x0e) | \
+ FTIM0_GPCM_TEAHC(0x0e))
+#define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0xff) | \
+ FTIM1_GPCM_TRAD(0x3f))
+#define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \
+ FTIM2_GPCM_TCH(0x8) | \
+ FTIM2_GPCM_TWP(0x1f))
+#define CONFIG_SYS_CS3_FTIM3 0x0
+
+#define CONFIG_NAND_FSL_IFC
+#define CONFIG_SYS_NAND_BASE 0xff800000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE)
+#else
+#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE
+#endif
+#define CONFIG_SYS_NAND_CSPR_EXT (0xf)
+#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
+ | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
+ | CSPR_MSEL_NAND /* MSEL = NAND */ \
+ | CSPR_V)
+#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024)
+
+#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \
+ | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \
+ | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \
+ | CSOR_NAND_RAL_3 /* RAL = 3Byes */ \
+ | CSOR_NAND_PGS_2K /* Page Size = 2K */ \
+ | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
+ | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/
+
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+
+/* ONFI NAND Flash mode0 Timing Params */
+#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \
+ FTIM0_NAND_TWP(0x18) | \
+ FTIM0_NAND_TWCHT(0x07) | \
+ FTIM0_NAND_TWH(0x0a))
+#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \
+ FTIM1_NAND_TWBE(0x39) | \
+ FTIM1_NAND_TRR(0x0e) | \
+ FTIM1_NAND_TRP(0x18))
+#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \
+ FTIM2_NAND_TREH(0x0a) | \
+ FTIM2_NAND_TWHRE(0x1e))
+#define CONFIG_SYS_NAND_FTIM3 0x0
+
+#define CONFIG_SYS_NAND_DDR_LAW 11
+#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_MTD_NAND_VERIFY_WRITE
+#define CONFIG_CMD_NAND
+
+#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
+
+#if defined(CONFIG_NAND)
+#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT
+#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR
+#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK
+#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR
+#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0
+#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1
+#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2
+#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3
+#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT
+#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR
+#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK
+#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR
+#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0
+#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1
+#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2
+#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3
+#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR1_CSPR_EXT
+#define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR
+#define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK
+#define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR
+#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0
+#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1
+#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2
+#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3
+#else
+#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT
+#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR
+#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK
+#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR
+#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0
+#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1
+#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2
+#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3
+#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT
+#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR
+#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK
+#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR
+#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0
+#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1
+#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2
+#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3
+#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT
+#define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR
+#define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK
+#define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR
+#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0
+#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1
+#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2
+#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3
+#endif
+
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
+#else
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+#endif
+
+#if defined(CONFIG_RAMBOOT_PBL)
+#define CONFIG_SYS_RAMBOOT
+#endif
+
+#define CONFIG_BOARD_EARLY_INIT_R
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_HWCONFIG
+
+/* define to use L1 as initial stack */
+#define CONFIG_L1_INIT_RAM
+#define CONFIG_SYS_INIT_RAM_LOCK
+#define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe0ec000
+/* The assembler doesn't like typecast */
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
+ ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
+ CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
+#else
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS 0xfe0ec000 /* Initial L1 address */
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
+#endif
+#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000
+
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
+
+#define CONFIG_SYS_MONITOR_LEN (768 * 1024)
+#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
+
+/* Serial Port */
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE 1
+#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2)
+
+#define CONFIG_SYS_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
+#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
+#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
+#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */
+
+/* Use the HUSH parser */
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+
+/* Video */
+#ifdef CONFIG_PPC_T1024 /* no DIU on T1023 */
+#define CONFIG_FSL_DIU_FB
+#ifdef CONFIG_FSL_DIU_FB
+#define CONFIG_FSL_DIU_CH7301
+#define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x180000)
+#define CONFIG_VIDEO
+#define CONFIG_CMD_BMP
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_SW_CURSOR
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_BMP_LOGO
+#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
+/*
+ * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so
+ * disable empty flash sector detection, which is I/O-intensive.
+ */
+#undef CONFIG_SYS_FLASH_EMPTY_INFO
+#endif
+#endif
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT
+#define CONFIG_OF_BOARD_SETUP
+#define CONFIG_OF_STDOUT_VIA_ALIAS
+
+/* new uImage format support */
+#define CONFIG_FIT
+#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */
+
+/* I2C */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL /* Use FSL common I2C driver */
+#define CONFIG_SYS_FSL_I2C_SPEED 50000 /* I2C speed in Hz */
+#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
+#define CONFIG_SYS_FSL_I2C2_SPEED 50000 /* I2C speed in Hz */
+#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET 0x118000
+#define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100
+
+#define I2C_MUX_PCA_ADDR 0x77
+#define I2C_MUX_PCA_ADDR_PRI 0x77 /* Primary Mux*/
+#define I2C_MUX_PCA_ADDR_SEC 0x76 /* Secondary multiplexer */
+#define I2C_RETIMER_ADDR 0x18
+
+/* I2C bus multiplexer */
+#define I2C_MUX_CH_DEFAULT 0x8
+#define I2C_MUX_CH_DIU 0xC
+#define I2C_MUX_CH5 0xD
+#define I2C_MUX_CH7 0xF
+
+/* LDI/DVI Encoder for display */
+#define CONFIG_SYS_I2C_LDI_ADDR 0x38
+#define CONFIG_SYS_I2C_DVI_ADDR 0x75
+
+/*
+ * RTC configuration
+ */
+#define RTC
+#define CONFIG_RTC_DS3231 1
+#define CONFIG_SYS_I2C_RTC_ADDR 0x68
+
+/*
+ * eSPI - Enhanced SPI
+ */
+#define CONFIG_FSL_ESPI
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_STMICRO
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_SPI_FLASH_SST
+#define CONFIG_SPI_FLASH_EON
+#endif
+#define CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH_BAR
+#define CONFIG_SF_DEFAULT_SPEED 10000000
+#define CONFIG_SF_DEFAULT_MODE 0
+
+/*
+ * General PCIe
+ * Memory space is mapped 1-1, but I/O space must start from 0.
+ */
+#define CONFIG_PCI /* Enable PCI/PCIE */
+#define CONFIG_PCIE1 /* PCIE controler 1 */
+#define CONFIG_PCIE2 /* PCIE controler 2 */
+#define CONFIG_PCIE3 /* PCIE controler 3 */
+#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
+#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
+#define CONFIG_PCI_INDIRECT_BRIDGE
+
+#ifdef CONFIG_PCI
+/* controller 1, direct to uli, tgtid 3, Base address 20000 */
+#ifdef CONFIG_PCIE1
+#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull
+#else
+#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000
+#endif
+#define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 256M */
+#define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000
+#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull
+#else
+#define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000
+#endif
+#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */
+#endif
+
+/* controller 2, Slot 2, tgtid 2, Base address 201000 */
+#ifdef CONFIG_PCIE2
+#define CONFIG_SYS_PCIE2_MEM_VIRT 0x90000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000
+#define CONFIG_SYS_PCIE2_MEM_PHYS 0xc10000000ull
+#else
+#define CONFIG_SYS_PCIE2_MEM_BUS 0x90000000
+#define CONFIG_SYS_PCIE2_MEM_PHYS 0x90000000
+#endif
+#define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */
+#define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000
+#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull
+#else
+#define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000
+#endif
+#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */
+#endif
+
+/* controller 3, Slot 1, tgtid 1, Base address 202000 */
+#ifdef CONFIG_PCIE3
+#define CONFIG_SYS_PCIE3_MEM_VIRT 0xa0000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000
+#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc20000000ull
+#else
+#define CONFIG_SYS_PCIE3_MEM_BUS 0xa0000000
+#define CONFIG_SYS_PCIE3_MEM_PHYS 0xa0000000
+#endif
+#define CONFIG_SYS_PCIE3_MEM_SIZE 0x10000000 /* 256M */
+#define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000
+#define CONFIG_SYS_PCIE3_IO_BUS 0x00000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull
+#else
+#define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000
+#endif
+#define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */
+#endif
+
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+#define CONFIG_E1000
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CONFIG_DOS_PARTITION
+#endif /* CONFIG_PCI */
+
+/*
+ *SATA
+ */
+#define CONFIG_FSL_SATA_V2
+#ifdef CONFIG_FSL_SATA_V2
+#define CONFIG_LIBATA
+#define CONFIG_FSL_SATA
+#define CONFIG_SYS_SATA_MAX_DEVICE 1
+#define CONFIG_SATA1
+#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR
+#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA
+#define CONFIG_LBA48
+#define CONFIG_CMD_SATA
+#define CONFIG_DOS_PARTITION
+#define CONFIG_CMD_EXT2
+#endif
+
+/*
+ * USB
+ */
+#define CONFIG_HAS_FSL_DR_USB
+
+#ifdef CONFIG_HAS_FSL_DR_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_CMD_USB
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_EHCI_FSL
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_CMD_EXT2
+#endif
+
+/*
+ * SDHC
+ */
+#define CONFIG_MMC
+#ifdef CONFIG_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
+#define CONFIG_CMD_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#endif
+
+/* Qman/Bman */
+#ifndef CONFIG_NOBQFMAN
+#define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */
+#define CONFIG_SYS_BMAN_NUM_PORTALS 25
+#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull
+#else
+#define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE
+#endif
+#define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000
+#define CONFIG_SYS_QMAN_NUM_PORTALS 25
+#define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull
+#else
+#define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE
+#endif
+#define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000
+
+#define CONFIG_SYS_DPAA_FMAN
+
+#define CONFIG_QE
+#define CONFIG_U_QE
+/* Default address of microcode for the Linux FMan driver */
+#if defined(CONFIG_SPIFLASH)
+/*
+ * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
+ * env, so we got 0x110000.
+ */
+#define CONFIG_SYS_QE_FW_IN_SPIFLASH
+#define CONFIG_SYS_FMAN_FW_ADDR 0x110000
+#define CONFIG_SYS_QE_FW_ADDR 0x130000
+#elif defined(CONFIG_SDCARD)
+/*
+ * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
+ * about 1MB (2048 blocks), Env is stored after the image, and the env size is
+ * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820).
+ */
+#define CONFIG_SYS_QE_FMAN_FW_IN_MMC
+#define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
+#define CONFIG_SYS_QE_FW_ADDR (512 * 0x920)
+#elif defined(CONFIG_NAND)
+#define CONFIG_SYS_QE_FMAN_FW_IN_NAND
+#define CONFIG_SYS_FMAN_FW_ADDR (11 * CONFIG_SYS_NAND_BLOCK_SIZE)
+#define CONFIG_SYS_QE_FW_ADDR (12 * CONFIG_SYS_NAND_BLOCK_SIZE)
+#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
+/*
+ * Slave has no ucode locally, it can fetch this from remote. When implementing
+ * in two corenet boards, slave's ucode could be stored in master's memory
+ * space, the address can be mapped from slave TLB->slave LAW->
+ * slave SRIO or PCIE outbound window->master inbound window->
+ * master LAW->the ucode address in master's memory space.
+ */
+#define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
+#define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
+#else
+#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
+#define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
+#define CONFIG_SYS_QE_FW_ADDR 0xEFE00000
+#endif
+#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000
+#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
+#endif /* CONFIG_NOBQFMAN */
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+#define CONFIG_FMAN_ENET
+#define CONFIG_PHYLIB_10G
+#define CONFIG_PHY_VITESSE
+#define CONFIG_PHY_REALTEK
+#define CONFIG_PHY_TERANETICS
+#define RGMII_PHY1_ADDR 0x1
+#define RGMII_PHY2_ADDR 0x2
+#define SGMII_CARD_AQ_PHY_ADDR_S3 0x3
+#define SGMII_CARD_AQ_PHY_ADDR_S4 0x4
+#define SGMII_CARD_AQ_PHY_ADDR_S5 0x5
+#define SGMII_CARD_PORT1_PHY_ADDR 0x1C
+#define SGMII_CARD_PORT2_PHY_ADDR 0x1D
+#define SGMII_CARD_PORT3_PHY_ADDR 0x1E
+#define SGMII_CARD_PORT4_PHY_ADDR 0x1F
+#endif
+
+#ifdef CONFIG_FMAN_ENET
+#define CONFIG_MII /* MII PHY management */
+#define CONFIG_ETHPRIME "FM1@DTSEC4"
+#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */
+#endif
+
+/*
+ * Dynamic MTD Partition support with mtdparts
+ */
+#ifndef CONFIG_SYS_NO_FLASH
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_FLASH_CFI_MTD
+#define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \
+ "spi0=spife110000.0"
+#define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \
+ "128k(dtb),96m(fs),-(user);"\
+ "fff800000.flash:2m(uboot),9m(kernel),"\
+ "128k(dtb),96m(fs),-(user);spife110000.0:" \
+ "2m(uboot),9m(kernel),128k(dtb),-(user)"
+#endif
+
+/*
+ * Environment
+ */
+#define CONFIG_LOADS_ECHO /* echo on for serial download */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_ERRATA
+#define CONFIG_CMD_GREPENV
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SETEXPR
+
+#ifdef CONFIG_PCI
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_NET
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_CMDLINE_EDITING /* Command-line editing */
+#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
+#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
+#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
+#ifdef CONFIG_CMD_KGDB
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 64 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/
+#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
+
+#ifdef CONFIG_CMD_KGDB
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#endif
+
+/*
+ * Environment Configuration
+ */
+#define CONFIG_ROOTPATH "/opt/nfsroot"
+#define CONFIG_BOOTFILE "uImage"
+#define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server */
+#define CONFIG_LOADADDR 1000000 /* default location for tftp, bootm */
+#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
+#define CONFIG_BAUDRATE 115200
+#define __USB_PHY_TYPE utmi
+
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "hwconfig=fsl_ddr:ctlr_intlv=cacheline,bank_intlv=cs0_cs1;\0" \
+ "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0" \
+ "bootargs=root=/dev/ram rw console=ttyS0,115200\0" \
+ "ramdiskfile=t1024qds/ramdisk.uboot\0" \
+ "fdtfile=t1024qds/t1024qds.dtb\0" \
+ "netdev=eth0\0" \
+ "video-mode=fslfb:1024x768-32@60,monitor=dvi\0" \
+ "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
+ "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \
+ "tftpflash=tftpboot $loadaddr $uboot && " \
+ "protect off $ubootaddr +$filesize && " \
+ "erase $ubootaddr +$filesize && " \
+ "cp.b $loadaddr $ubootaddr $filesize && " \
+ "protect on $ubootaddr +$filesize && " \
+ "cmp.b $loadaddr $ubootaddr $filesize\0" \
+ "consoledev=ttyS0\0" \
+ "ramdiskaddr=2000000\0" \
+ "fdtaddr=d00000\0" \
+ "bdev=sda3\0"
+
+#define CONFIG_LINUX \
+ "setenv bootargs root=/dev/ram rw " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "setenv ramdiskaddr 0x02000000;" \
+ "setenv fdtaddr 0x00c00000;" \
+ "setenv loadaddr 0x1000000;" \
+ "bootm $loadaddr $ramdiskaddr $fdtaddr"
+
+#define CONFIG_NFSBOOTCOMMAND \
+ "setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$serverip:$rootpath " \
+ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr - $fdtaddr"
+
+#define CONFIG_BOOTCOMMAND CONFIG_LINUX
+
+#ifdef CONFIG_SECURE_BOOT
+#include <asm/fsl_secure_boot.h>
+#endif
+
+#endif /* __T1024QDS_H */
diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h
new file mode 100644
index 0000000..6f1fcd6
--- /dev/null
+++ b/include/configs/T102xRDB.h
@@ -0,0 +1,896 @@
+/*
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/*
+ * T1024/T1023 RDB board configuration file
+ */
+
+#ifndef __T1024RDB_H
+#define __T1024RDB_H
+
+/* High Level Configuration Options */
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_BOOKE
+#define CONFIG_E500 /* BOOKE e500 family */
+#define CONFIG_E500MC /* BOOKE e500mc family */
+#define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */
+#define CONFIG_MP /* support multiple processors */
+#define CONFIG_PHYS_64BIT
+#define CONFIG_ENABLE_36BIT_PHYS
+
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_ADDR_MAP 1
+#define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */
+#endif
+
+#define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */
+#define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS
+#define CONFIG_FSL_IFC /* Enable IFC Support */
+
+#define CONFIG_FSL_LAW /* Use common FSL init code */
+#define CONFIG_ENV_OVERWRITE
+
+/* support deep sleep */
+#define CONFIG_DEEP_SLEEP
+#define CONFIG_SILENT_CONSOLE
+
+#ifdef CONFIG_RAMBOOT_PBL
+#define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xrdb/t1024_pbi.cfg
+#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_rcw.cfg
+#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
+#define CONFIG_SPL_ENV_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_FLUSH_IMAGE
+#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
+#define CONFIG_FSL_LAW /* Use common FSL init code */
+#define CONFIG_SYS_TEXT_BASE 0x00201000
+#define CONFIG_SPL_TEXT_BASE 0xFFFD8000
+#define CONFIG_SPL_PAD_TO 0x40000
+#define CONFIG_SPL_MAX_SIZE 0x28000
+#define RESET_VECTOR_OFFSET 0x27FFC
+#define BOOT_PAGE_OFFSET 0x27000
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SPL_SKIP_RELOCATE
+#define CONFIG_SPL_COMMON_INIT_DDR
+#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
+#define CONFIG_SYS_NO_FLASH
+#endif
+
+#ifdef CONFIG_NAND
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10)
+#define CONFIG_SYS_NAND_U_BOOT_DST 0x00200000
+#define CONFIG_SYS_NAND_U_BOOT_START 0x00200000
+#define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10)
+#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
+#define CONFIG_SPL_NAND_BOOT
+#endif
+
+#ifdef CONFIG_SPIFLASH
+#define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC
+#define CONFIG_SPL_SPI_SUPPORT
+#define CONFIG_SPL_SPI_FLASH_SUPPORT
+#define CONFIG_SPL_SPI_FLASH_MINIMAL
+#define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10)
+#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x00200000)
+#define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x00200000)
+#define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (256 << 10)
+#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds"
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_SYS_MPC85XX_NO_RESETVEC
+#endif
+#define CONFIG_SPL_SPI_BOOT
+#endif
+
+#ifdef CONFIG_SDCARD
+#define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_MMC_MINIMAL
+#define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10)
+#define CONFIG_SYS_MMC_U_BOOT_DST (0x00200000)
+#define CONFIG_SYS_MMC_U_BOOT_START (0x00200000)
+#define CONFIG_SYS_MMC_U_BOOT_OFFS (260 << 10)
+#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds"
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_SYS_MPC85XX_NO_RESETVEC
+#endif
+#define CONFIG_SPL_MMC_BOOT
+#endif
+
+#endif /* CONFIG_RAMBOOT_PBL */
+
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE 0xeff40000
+#endif
+
+#ifndef CONFIG_RESET_VECTOR_ADDRESS
+#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc
+#endif
+
+#ifndef CONFIG_SYS_NO_FLASH
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#endif
+
+/* PCIe Boot - Master */
+#define CONFIG_SRIO_PCIE_BOOT_MASTER
+/*
+ * for slave u-boot IMAGE instored in master memory space,
+ * PHYS must be aligned based on the SIZE
+ */
+#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull
+#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull
+#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull
+#else
+#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xef200000
+#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0xfff00000
+#endif
+/*
+ * for slave UCODE and ENV instored in master memory space,
+ * PHYS must be aligned based on the SIZE
+ */
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull
+#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
+#else
+#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xef100000
+#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0xffe00000
+#endif
+#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */
+/* slave core release by master*/
+#define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
+#define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
+
+/* PCIe Boot - Slave */
+#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
+#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
+#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
+ (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
+/* Set 1M boot space for PCIe boot */
+#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000)
+#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \
+ (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR)
+#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
+#define CONFIG_SYS_NO_FLASH
+#endif
+
+#if defined(CONFIG_SPIFLASH)
+#define CONFIG_SYS_EXTRA_ENV_RELOC
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SPI_BUS 0
+#define CONFIG_ENV_SPI_CS 0
+#define CONFIG_ENV_SPI_MAX_HZ 10000000
+#define CONFIG_ENV_SPI_MODE 0
+#define CONFIG_ENV_SIZE 0x2000 /* 8KB */
+#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */
+#define CONFIG_ENV_SECT_SIZE 0x10000
+#elif defined(CONFIG_SDCARD)
+#define CONFIG_SYS_EXTRA_ENV_RELOC
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#define CONFIG_ENV_SIZE 0x2000
+#define CONFIG_ENV_OFFSET (512 * 0x800)
+#elif defined(CONFIG_NAND)
+#define CONFIG_SYS_EXTRA_ENV_RELOC
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_SIZE 0x2000
+#define CONFIG_ENV_OFFSET (2 * CONFIG_SYS_NAND_BLOCK_SIZE)
+#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
+#define CONFIG_ENV_IS_IN_REMOTE
+#define CONFIG_ENV_ADDR 0xffe20000
+#define CONFIG_ENV_SIZE 0x2000
+#elif defined(CONFIG_ENV_IS_NOWHERE)
+#define CONFIG_ENV_SIZE 0x2000
+#else
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE 0x2000
+#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
+#endif
+
+
+#ifndef __ASSEMBLY__
+unsigned long get_board_sys_clk(void);
+unsigned long get_board_ddr_clk(void);
+#endif
+
+#define CONFIG_SYS_CLK_FREQ 100000000
+#define CONFIG_DDR_CLK_FREQ 66660000
+
+/*
+ * These can be toggled for performance analysis, otherwise use default.
+ */
+#define CONFIG_SYS_CACHE_STASHING
+#define CONFIG_BACKSIDE_L2_CACHE
+#define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E
+#define CONFIG_BTB /* toggle branch predition */
+#define CONFIG_DDR_ECC
+#ifdef CONFIG_DDR_ECC
+#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
+#define CONFIG_MEM_INIT_VALUE 0xdeadbeef
+#endif
+
+#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0x00400000
+#define CONFIG_SYS_ALT_MEMTEST
+#define CONFIG_PANIC_HANG /* do not reset board on panic */
+
+/*
+ * Config the L3 Cache as L3 SRAM
+ */
+#define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000
+#define CONFIG_SYS_L3_SIZE (256 << 10)
+#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024)
+#ifdef CONFIG_RAMBOOT_PBL
+#define CONFIG_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024)
+#endif
+#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SPL_GD_ADDR + 12 * 1024)
+#define CONFIG_SPL_RELOC_MALLOC_SIZE (30 << 10)
+#define CONFIG_SPL_RELOC_STACK (CONFIG_SPL_GD_ADDR + 64 * 1024)
+#define CONFIG_SPL_RELOC_STACK_SIZE (22 << 10)
+
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_DCSRBAR 0xf0000000
+#define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull
+#endif
+
+/* EEPROM */
+#define CONFIG_ID_EEPROM
+#define CONFIG_SYS_I2C_EEPROM_NXID
+#define CONFIG_SYS_EEPROM_BUS_NUM 0
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
+
+/*
+ * DDR Setup
+ */
+#define CONFIG_VERY_BIG_RAM
+#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
+#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
+#define CONFIG_DIMM_SLOTS_PER_CTLR 1
+#define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR)
+#define CONFIG_DDR_SPD
+#define CONFIG_SYS_FSL_DDR3
+
+#define CONFIG_SYS_SPD_BUS_NUM 0
+#define SPD_EEPROM_ADDRESS 0x51
+
+#define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */
+
+/*
+ * IFC Definitions
+ */
+#define CONFIG_SYS_FLASH_BASE 0xe8000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
+#else
+#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
+#endif
+
+#define CONFIG_SYS_NOR0_CSPR_EXT (0xf)
+#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
+ CSPR_PORT_SIZE_16 | \
+ CSPR_MSEL_NOR | \
+ CSPR_V)
+#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024)
+
+/* NOR Flash Timing Params */
+#define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80
+#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \
+ FTIM0_NOR_TEADC(0x5) | \
+ FTIM0_NOR_TEAHC(0x5))
+#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \
+ FTIM1_NOR_TRAD_NOR(0x1A) |\
+ FTIM1_NOR_TSEQRAD_NOR(0x13))
+#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \
+ FTIM2_NOR_TCH(0x4) | \
+ FTIM2_NOR_TWPH(0x0E) | \
+ FTIM2_NOR_TWP(0x1c))
+#define CONFIG_SYS_NOR_FTIM3 0x0
+
+#define CONFIG_SYS_FLASH_QUIET_TEST
+#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
+
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */
+#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
+
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS}
+
+/* CPLD on IFC */
+#define CONFIG_SYS_CPLD_BASE 0xffdf0000
+#define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
+#define CONFIG_SYS_CSPR2_EXT (0xf)
+#define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE) \
+ | CSPR_PORT_SIZE_8 \
+ | CSPR_MSEL_GPCM \
+ | CSPR_V)
+#define CONFIG_SYS_AMASK2 IFC_AMASK(64*1024)
+#define CONFIG_SYS_CSOR2 0x0
+
+/* CPLD Timing parameters for IFC CS2 */
+#define CONFIG_SYS_CS2_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \
+ FTIM0_GPCM_TEADC(0x0e) | \
+ FTIM0_GPCM_TEAHC(0x0e))
+#define CONFIG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \
+ FTIM1_GPCM_TRAD(0x1f))
+#define CONFIG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \
+ FTIM2_GPCM_TCH(0x8) | \
+ FTIM2_GPCM_TWP(0x1f))
+#define CONFIG_SYS_CS2_FTIM3 0x0
+
+/* NAND Flash on IFC */
+#define CONFIG_NAND_FSL_IFC
+#define CONFIG_SYS_NAND_BASE 0xff800000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE)
+#else
+#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE
+#endif
+#define CONFIG_SYS_NAND_CSPR_EXT (0xf)
+#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
+ | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
+ | CSPR_MSEL_NAND /* MSEL = NAND */ \
+ | CSPR_V)
+#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024)
+
+#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \
+ | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \
+ | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \
+ | CSOR_NAND_RAL_3 /* RAL = 3Byes */ \
+ | CSOR_NAND_PGS_4K /* Page Size = 4K */ \
+ | CSOR_NAND_SPRZ_224 /* Spare size = 224 */ \
+ | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/
+
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+
+/* ONFI NAND Flash mode0 Timing Params */
+#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \
+ FTIM0_NAND_TWP(0x18) | \
+ FTIM0_NAND_TWCHT(0x07) | \
+ FTIM0_NAND_TWH(0x0a))
+#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \
+ FTIM1_NAND_TWBE(0x39) | \
+ FTIM1_NAND_TRR(0x0e) | \
+ FTIM1_NAND_TRP(0x18))
+#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \
+ FTIM2_NAND_TREH(0x0a) | \
+ FTIM2_NAND_TWHRE(0x1e))
+#define CONFIG_SYS_NAND_FTIM3 0x0
+
+#define CONFIG_SYS_NAND_DDR_LAW 11
+#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_MTD_NAND_VERIFY_WRITE
+#define CONFIG_CMD_NAND
+
+#define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024)
+
+#if defined(CONFIG_NAND)
+#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT
+#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR
+#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK
+#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR
+#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0
+#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1
+#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2
+#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3
+#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT
+#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR
+#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK
+#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR
+#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0
+#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1
+#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2
+#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3
+#else
+#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT
+#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR
+#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK
+#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR
+#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0
+#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1
+#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2
+#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3
+#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NAND_CSPR_EXT
+#define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR
+#define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK
+#define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR
+#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0
+#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1
+#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2
+#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3
+#endif
+
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
+#else
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+#endif
+
+#if defined(CONFIG_RAMBOOT_PBL)
+#define CONFIG_SYS_RAMBOOT
+#endif
+
+#define CONFIG_BOARD_EARLY_INIT_R
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_HWCONFIG
+
+/* define to use L1 as initial stack */
+#define CONFIG_L1_INIT_RAM
+#define CONFIG_SYS_INIT_RAM_LOCK
+#define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe0ec000
+/* The assembler doesn't like typecast */
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
+ ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
+ CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
+#else
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS 0xfe0ec000 /* Initial L1 address */
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
+#endif
+#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000
+
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
+
+#define CONFIG_SYS_MONITOR_LEN (768 * 1024)
+#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
+
+/* Serial Port */
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE 1
+#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2)
+
+#define CONFIG_SYS_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
+#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
+#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
+#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* determine from environment */
+
+/* Use the HUSH parser */
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+
+/* Video */
+#undef CONFIG_FSL_DIU_FB /* RDB doesn't support DIU */
+#ifdef CONFIG_FSL_DIU_FB
+#define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x180000)
+#define CONFIG_VIDEO
+#define CONFIG_CMD_BMP
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_SW_CURSOR
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_BMP_LOGO
+#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
+/*
+ * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so
+ * disable empty flash sector detection, which is I/O-intensive.
+ */
+#undef CONFIG_SYS_FLASH_EMPTY_INFO
+#endif
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT
+#define CONFIG_OF_BOARD_SETUP
+#define CONFIG_OF_STDOUT_VIA_ALIAS
+
+/* new uImage format support */
+#define CONFIG_FIT
+#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */
+
+/* I2C */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL /* Use FSL common I2C driver */
+#define CONFIG_SYS_FSL_I2C_SPEED 50000 /* I2C speed in Hz */
+#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
+#define CONFIG_SYS_FSL_I2C2_SPEED 50000 /* I2C speed in Hz */
+#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET 0x118000
+#define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100
+
+#define I2C_MUX_PCA_ADDR 0x77
+#define I2C_MUX_PCA_ADDR_PRI 0x77 /* Primary Mux*/
+
+
+/* I2C bus multiplexer */
+#define I2C_MUX_CH_DEFAULT 0x8
+
+/*
+ * RTC configuration
+ */
+#define RTC
+#define CONFIG_RTC_DS1337 1
+#define CONFIG_SYS_I2C_RTC_ADDR 0x68
+
+/*
+ * eSPI - Enhanced SPI
+ */
+#define CONFIG_FSL_ESPI
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH_BAR
+#define CONFIG_SF_DEFAULT_SPEED 10000000
+#define CONFIG_SF_DEFAULT_MODE 0
+
+/*
+ * General PCIe
+ * Memory space is mapped 1-1, but I/O space must start from 0.
+ */
+#define CONFIG_PCI /* Enable PCI/PCIE */
+#define CONFIG_PCIE1 /* PCIE controler 1 */
+#define CONFIG_PCIE2 /* PCIE controler 2 */
+#define CONFIG_PCIE3 /* PCIE controler 3 */
+#ifdef CONFIG_PPC_T1040
+#define CONFIG_PCIE4 /* PCIE controler 4 */
+#endif
+#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
+#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
+#define CONFIG_PCI_INDIRECT_BRIDGE
+
+#ifdef CONFIG_PCI
+/* controller 1, direct to uli, tgtid 3, Base address 20000 */
+#ifdef CONFIG_PCIE1
+#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull
+#else
+#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000
+#endif
+#define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 256M */
+#define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000
+#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull
+#else
+#define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000
+#endif
+#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */
+#endif
+
+/* controller 2, Slot 2, tgtid 2, Base address 201000 */
+#ifdef CONFIG_PCIE2
+#define CONFIG_SYS_PCIE2_MEM_VIRT 0x90000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000
+#define CONFIG_SYS_PCIE2_MEM_PHYS 0xc10000000ull
+#else
+#define CONFIG_SYS_PCIE2_MEM_BUS 0x90000000
+#define CONFIG_SYS_PCIE2_MEM_PHYS 0x90000000
+#endif
+#define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */
+#define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000
+#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull
+#else
+#define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000
+#endif
+#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */
+#endif
+
+/* controller 3, Slot 1, tgtid 1, Base address 202000 */
+#ifdef CONFIG_PCIE3
+#define CONFIG_SYS_PCIE3_MEM_VIRT 0xa0000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000
+#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc20000000ull
+#else
+#define CONFIG_SYS_PCIE3_MEM_BUS 0xa0000000
+#define CONFIG_SYS_PCIE3_MEM_PHYS 0xa0000000
+#endif
+#define CONFIG_SYS_PCIE3_MEM_SIZE 0x10000000 /* 256M */
+#define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000
+#define CONFIG_SYS_PCIE3_IO_BUS 0x00000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull
+#else
+#define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000
+#endif
+#define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */
+#endif
+
+/* controller 4, Base address 203000, to be removed */
+#ifdef CONFIG_PCIE4
+#define CONFIG_SYS_PCIE4_MEM_VIRT 0xb0000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000
+#define CONFIG_SYS_PCIE4_MEM_PHYS 0xc30000000ull
+#else
+#define CONFIG_SYS_PCIE4_MEM_BUS 0xb0000000
+#define CONFIG_SYS_PCIE4_MEM_PHYS 0xb0000000
+#endif
+#define CONFIG_SYS_PCIE4_MEM_SIZE 0x10000000 /* 256M */
+#define CONFIG_SYS_PCIE4_IO_VIRT 0xf8030000
+#define CONFIG_SYS_PCIE4_IO_BUS 0x00000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull
+#else
+#define CONFIG_SYS_PCIE4_IO_PHYS 0xf8030000
+#endif
+#define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */
+#endif
+
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+#define CONFIG_E1000
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CONFIG_DOS_PARTITION
+#endif /* CONFIG_PCI */
+
+/*
+ * USB
+ */
+#define CONFIG_HAS_FSL_DR_USB
+
+#ifdef CONFIG_HAS_FSL_DR_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_CMD_USB
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_EHCI_FSL
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_CMD_EXT2
+#endif
+
+/*
+ * SDHC
+ */
+#define CONFIG_MMC
+#ifdef CONFIG_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
+#define CONFIG_CMD_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#endif
+
+/* Qman/Bman */
+#ifndef CONFIG_NOBQFMAN
+#define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */
+#define CONFIG_SYS_BMAN_NUM_PORTALS 25
+#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull
+#else
+#define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE
+#endif
+#define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000
+#define CONFIG_SYS_QMAN_NUM_PORTALS 25
+#define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull
+#else
+#define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE
+#endif
+#define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000
+
+#define CONFIG_SYS_DPAA_FMAN
+
+#define CONFIG_QE
+#define CONFIG_U_QE
+/* Default address of microcode for the Linux FMan driver */
+#if defined(CONFIG_SPIFLASH)
+/*
+ * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
+ * env, so we got 0x110000.
+ */
+#define CONFIG_SYS_QE_FW_IN_SPIFLASH
+#define CONFIG_SYS_FMAN_FW_ADDR 0x110000
+#define CONFIG_SYS_QE_FW_ADDR 0x130000
+#elif defined(CONFIG_SDCARD)
+/*
+ * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
+ * about 1MB (2048 blocks), Env is stored after the image, and the env size is
+ * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820).
+ */
+#define CONFIG_SYS_QE_FMAN_FW_IN_MMC
+#define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820)
+#define CONFIG_SYS_QE_FW_ADDR (512 * 0x920)
+#elif defined(CONFIG_NAND)
+#define CONFIG_SYS_QE_FMAN_FW_IN_NAND
+#define CONFIG_SYS_FMAN_FW_ADDR (3 * CONFIG_SYS_NAND_BLOCK_SIZE)
+#define CONFIG_SYS_QE_FW_ADDR (4 * CONFIG_SYS_NAND_BLOCK_SIZE)
+#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE)
+/*
+ * Slave has no ucode locally, it can fetch this from remote. When implementing
+ * in two corenet boards, slave's ucode could be stored in master's memory
+ * space, the address can be mapped from slave TLB->slave LAW->
+ * slave SRIO or PCIE outbound window->master inbound window->
+ * master LAW->the ucode address in master's memory space.
+ */
+#define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
+#define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000
+#else
+#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
+#define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000
+#define CONFIG_SYS_QE_FW_ADDR 0xEFE00000
+#endif
+#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000
+#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
+#endif /* CONFIG_NOBQFMAN */
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+#define CONFIG_FMAN_ENET
+#define CONFIG_PHYLIB_10G
+#define CONFIG_PHY_REALTEK
+#define RGMII_PHY1_ADDR 0x2
+#define RGMII_PHY2_ADDR 0x6
+#define FM1_10GEC1_PHY_ADDR 0x1
+#endif
+
+#ifdef CONFIG_FMAN_ENET
+#define CONFIG_MII /* MII PHY management */
+#define CONFIG_ETHPRIME "FM1@DTSEC4"
+#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */
+#endif
+
+/*
+ * Dynamic MTD Partition support with mtdparts
+ */
+#ifndef CONFIG_SYS_NO_FLASH
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_FLASH_CFI_MTD
+#define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \
+ "spi0=spife110000.1"
+#define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \
+ "128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot)," \
+ "5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:" \
+ "1m(uboot),5m(kernel),128k(dtb),-(user)"
+#endif
+
+/*
+ * Environment
+ */
+#define CONFIG_LOADS_ECHO /* echo on for serial download */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_ERRATA
+#define CONFIG_CMD_GREPENV
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SETEXPR
+#define CONFIG_CMD_BDI
+
+#ifdef CONFIG_PCI
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_NET
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_CMDLINE_EDITING /* Command-line editing */
+#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
+#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
+#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
+#ifdef CONFIG_CMD_KGDB
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 64 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/
+#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
+
+#ifdef CONFIG_CMD_KGDB
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#endif
+
+/*
+ * Environment Configuration
+ */
+#define CONFIG_ROOTPATH "/opt/nfsroot"
+#define CONFIG_BOOTFILE "uImage"
+#define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server */
+#define CONFIG_LOADADDR 1000000 /* default location for tftp, bootm */
+#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
+#define CONFIG_BAUDRATE 115200
+#define __USB_PHY_TYPE utmi
+
+#ifdef CONFIG_PPC_T1024
+#define CONFIG_BOARDNAME "t1024rdb"
+#else
+#define CONFIG_BOARDNAME "t1023rdb"
+#endif
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \
+ "bank_intlv=cs0_cs1\0" \
+ "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0" \
+ "ramdiskfile=" __stringify(CONFIG_BOARDNAME) "/ramdisk.uboot\0" \
+ "fdtfile=" __stringify(CONFIG_BOARDNAME) "/" \
+ __stringify(CONFIG_BOARDNAME) ".dtb\0" \
+ "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
+ "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \
+ "bootargs=root=/dev/ram rw console=ttyS0,115200\0" \
+ "netdev=eth0\0" \
+ "tftpflash=tftpboot $loadaddr $uboot && " \
+ "protect off $ubootaddr +$filesize && " \
+ "erase $ubootaddr +$filesize && " \
+ "cp.b $loadaddr $ubootaddr $filesize && " \
+ "protect on $ubootaddr +$filesize && " \
+ "cmp.b $loadaddr $ubootaddr $filesize\0" \
+ "consoledev=ttyS0\0" \
+ "ramdiskaddr=2000000\0" \
+ "fdtaddr=c00000\0" \
+ "bdev=sda3\0"
+
+#define CONFIG_LINUX \
+ "setenv bootargs root=/dev/ram rw " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "setenv ramdiskaddr 0x02000000;" \
+ "setenv fdtaddr 0x00c00000;" \
+ "setenv loadaddr 0x1000000;" \
+ "bootm $loadaddr $ramdiskaddr $fdtaddr"
+
+
+#define CONFIG_NFSBOOTCOMMAND \
+ "setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$serverip:$rootpath " \
+ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr - $fdtaddr"
+
+#define CONFIG_BOOTCOMMAND CONFIG_LINUX
+
+#ifdef CONFIG_SECURE_BOOT
+#include <asm/fsl_secure_boot.h>
+#endif
+
+#endif /* __T1024RDB_H */
diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h
index 2178f9d..6b396bb 100644
--- a/include/configs/T1040QDS.h
+++ b/include/configs/T1040QDS.h
@@ -28,6 +28,8 @@
*/
#define CONFIG_T1040QDS
#define CONFIG_PHYS_64BIT
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_DISPLAY_BOARDINFO
#ifdef CONFIG_RAMBOOT_PBL
#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE
@@ -176,8 +178,8 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_DDR_SPD
#ifndef CONFIG_SYS_FSL_DDR4
#define CONFIG_SYS_FSL_DDR3
-#define CONFIG_FSL_DDR_INTERACTIVE
#endif
+#define CONFIG_FSL_DDR_INTERACTIVE
#define CONFIG_SYS_SPD_BUS_NUM 0
#define SPD_EEPROM_ADDRESS 0x51
@@ -768,8 +770,7 @@ unsigned long get_board_ddr_clk(void);
#define __USB_PHY_TYPE utmi
#define CONFIG_EXTRA_ENV_SETTINGS \
- "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \
- "bank_intlv=cs0_cs1;" \
+ "hwconfig=fsl_ddr:bank_intlv=auto;" \
"usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
"netdev=eth0\0" \
"video-mode=fslfb:1024x768-32@60,monitor=dvi\0" \
diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h
index 216f34f..1eb1371 100644
--- a/include/configs/T104xRDB.h
+++ b/include/configs/T104xRDB.h
@@ -12,6 +12,11 @@
*/
#define CONFIG_T104xRDB
#define CONFIG_PHYS_64BIT
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_DISPLAY_BOARDINFO
+
+#define CONFIG_E500 /* BOOKE e500 family */
+#include <asm/config_mpc85xx.h>
#ifdef CONFIG_RAMBOOT_PBL
#define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t104xrdb/t104x_pbi.cfg
@@ -93,7 +98,6 @@
/* High Level Configuration Options */
#define CONFIG_BOOKE
-#define CONFIG_E500 /* BOOKE e500 family */
#define CONFIG_E500MC /* BOOKE e500mc family */
#define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */
#define CONFIG_MP /* support multiple processors */
@@ -386,6 +390,12 @@
#define CONFIG_SYS_RAMBOOT
#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_A008044
+#if defined(CONFIG_NAND)
+#define CONFIG_A008044_WORKAROUND
+#endif
+#endif
+
#define CONFIG_BOARD_EARLY_INIT_R
#define CONFIG_MISC_INIT_R
diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h
index 2f381e7..d1fe78e 100644
--- a/include/configs/T208xQDS.h
+++ b/include/configs/T208xQDS.h
@@ -234,7 +234,7 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
#define CONFIG_DDR_SPD
#define CONFIG_SYS_FSL_DDR3
-#undef CONFIG_FSL_DDR_INTERACTIVE
+#define CONFIG_FSL_DDR_INTERACTIVE
#define CONFIG_SYS_SPD_BUS_NUM 0
#define CONFIG_SYS_SDRAM_SIZE 2048 /* for fixed parameter use */
#define SPD_EEPROM_ADDRESS1 0x51
@@ -494,6 +494,23 @@ unsigned long get_board_ddr_clk(void);
#define I2C_MUX_PCA_ADDR_SEC2 0x76 /* I2C bus multiplexer,secondary 2 */
#define I2C_MUX_CH_DEFAULT 0x8
+#define I2C_MUX_CH_VOL_MONITOR 0xa
+
+/* Voltage monitor on channel 2*/
+#define I2C_VOL_MONITOR_ADDR 0x40
+#define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2
+#define I2C_VOL_MONITOR_BUS_V_OVF 0x1
+#define I2C_VOL_MONITOR_BUS_V_SHIFT 3
+
+#define CONFIG_VID_FLS_ENV "t208xqds_vdd_mv"
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_VID
+#endif
+#define CONFIG_VOL_MONITOR_IR36021_SET
+#define CONFIG_VOL_MONITOR_IR36021_READ
+/* The lowest and highest voltage allowed for T208xQDS */
+#define VDD_MV_MIN 819
+#define VDD_MV_MAX 1212
/*
* RapidIO
diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h
index 48b8dc7..db03993 100644
--- a/include/configs/T4240RDB.h
+++ b/include/configs/T4240RDB.h
@@ -690,6 +690,7 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
#define CONFIG_DOS_PARTITION
+#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
#endif
/* Hash command with SHA acceleration supported in hardware */
diff --git a/include/configs/a3m071.h b/include/configs/a3m071.h
index 120fdc6..d23d2c4 100644
--- a/include/configs/a3m071.h
+++ b/include/configs/a3m071.h
@@ -418,8 +418,6 @@
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_NOR_SUPPORT
#define CONFIG_SPL_TEXT_BASE 0xfc000000
-#define CONFIG_SPL_START_S_PATH "arch/powerpc/cpu/mpc5xxx"
-#define CONFIG_SPL_LDSCRIPT "arch/powerpc/cpu/mpc5xxx/u-boot-spl.lds"
#define CONFIG_SPL_LIBCOMMON_SUPPORT /* image.c */
#define CONFIG_SPL_LIBGENERIC_SUPPORT /* string.c */
#define CONFIG_SPL_SERIAL_SUPPORT
diff --git a/include/configs/alt.h b/include/configs/alt.h
index 5c8223c..58eac31 100644
--- a/include/configs/alt.h
+++ b/include/configs/alt.h
@@ -95,4 +95,23 @@
#define CONFIG_USB_EHCI_RMOBILE
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+/* MMCIF */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_CMD_MMC
+
+#define CONFIG_SH_MMCIF
+#define CONFIG_SH_MMCIF_ADDR 0xee200000
+#define CONFIG_SH_MMCIF_CLK 48000000
+
+/* Module stop status bits */
+/* INTC-RT */
+#define CONFIG_SMSTP0_ENA 0x00400000
+/* MSIF */
+#define CONFIG_SMSTP2_ENA 0x00002000
+/* INTC-SYS, IRQC */
+#define CONFIG_SMSTP4_ENA 0x00000180
+/* SCIF2 */
+#define CONFIG_SMSTP7_ENA 0x00080000
+
#endif /* __ALT_H */
diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h
index 0fbfa3f..09ee10c 100644
--- a/include/configs/am3517_crane.h
+++ b/include/configs/am3517_crane.h
@@ -304,7 +304,7 @@
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
-#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#define CONFIG_SPL_LIBCOMMON_SUPPORT
diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index 8719f76..190ef0e 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -313,7 +313,7 @@
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
-#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#define CONFIG_SPL_LIBCOMMON_SUPPORT
diff --git a/include/configs/apalis_t30.h b/include/configs/apalis_t30.h
index 3cde923..61809fc 100644
--- a/include/configs/apalis_t30.h
+++ b/include/configs/apalis_t30.h
@@ -26,10 +26,7 @@
/* I2C */
#define CONFIG_SYS_I2C_TEGRA
-#define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C
/* SD/MMC */
#define CONFIG_MMC
diff --git a/include/configs/beagle_x15.h b/include/configs/beagle_x15.h
new file mode 100644
index 0000000..cc36330
--- /dev/null
+++ b/include/configs/beagle_x15.h
@@ -0,0 +1,88 @@
+/*
+ * (C) Copyright 2014
+ * Texas Instruments Incorporated.
+ * Felipe Balbi <balbi@ti.com>
+ *
+ * Configuration settings for the TI Beagle x15 board.
+ * See ti_omap5_common.h for omap5 common settings.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_BEAGLE_X15_H
+#define __CONFIG_BEAGLE_X15_H
+
+#define CONFIG_AM57XX
+
+#define CONFIG_NR_DRAM_BANKS 2
+
+#define CONFIG_ENV_SIZE (64 << 10)
+#define CONFIG_ENV_IS_IN_FAT
+#define FAT_ENV_INTERFACE "mmc"
+#define FAT_ENV_DEVICE_AND_PART "0:1"
+#define FAT_ENV_FILE "uboot.env"
+
+#define CONFIG_CMD_SAVEENV
+
+#define CONSOLEDEV "ttyO2"
+#define CONFIG_SYS_NS16550_COM1 UART1_BASE /* Base EVM has UART0 */
+#define CONFIG_SYS_NS16550_COM2 UART2_BASE /* UART2 */
+#define CONFIG_SYS_NS16550_COM3 UART3_BASE /* UART3 */
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_SYS_OMAP_ABE_SYSCK
+
+/* Define the default GPT table for eMMC */
+#define PARTS_DEFAULT \
+ "uuid_disk=${uuid_gpt_disk};" \
+ "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}"
+
+#include <configs/ti_omap5_common.h>
+
+/* Enhance our eMMC support / experience. */
+#define CONFIG_CMD_GPT
+#define CONFIG_EFI_PARTITION
+#define CONFIG_PARTITION_UUIDS
+#define CONFIG_CMD_PART
+
+/* CPSW Ethernet */
+#define CONFIG_CMD_NET /* 'bootp' and 'tftp' */
+#define CONFIG_CMD_DHCP
+#define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_NET_RETRY_COUNT 10
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_MII
+#define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */
+#define CONFIG_MII /* Required in net/eth.c */
+#define CONFIG_PHY_GIGE /* per-board part of CPSW */
+#define CONFIG_PHYLIB
+
+#define CONFIG_SUPPORT_EMMC_BOOT
+
+/* USB xHCI HOST */
+#define CONFIG_CMD_USB
+#define CONFIG_USB_HOST
+#define CONFIG_USB_XHCI
+#define CONFIG_USB_XHCI_OMAP
+#define CONFIG_USB_STORAGE
+#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
+
+#define CONFIG_OMAP_USB_PHY
+#define CONFIG_OMAP_USB3PHY1_HOST
+
+/* SATA */
+#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_CMD_SCSI
+#define CONFIG_LIBATA
+#define CONFIG_SCSI_AHCI
+#define CONFIG_SCSI_AHCI_PLAT
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
+#define CONFIG_SYS_SCSI_MAX_LUN 1
+#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+ CONFIG_SYS_SCSI_MAX_LUN)
+
+#endif /* __CONFIG_BEAGLE_X5_H */
diff --git a/include/configs/beaver.h b/include/configs/beaver.h
index 164b2dd..5d765f3 100644
--- a/include/configs/beaver.h
+++ b/include/configs/beaver.h
@@ -40,10 +40,7 @@
/* I2C */
#define CONFIG_SYS_I2C_TEGRA
-#define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C
/* SD/MMC */
#define CONFIG_MMC
diff --git a/include/configs/cardhu.h b/include/configs/cardhu.h
index 09129c7..758b7ad 100644
--- a/include/configs/cardhu.h
+++ b/include/configs/cardhu.h
@@ -43,12 +43,7 @@
/* I2C */
#define CONFIG_SYS_I2C_TEGRA
-#define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_MAX_I2C_BUS TEGRA_I2C_NUM_CONTROLLERS
-#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C
/* SD/MMC */
#define CONFIG_MMC
diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index 1919cde..ccd9b88 100644
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -321,7 +321,7 @@
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
-#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#define CONFIG_SPL_BOARD_INIT
diff --git a/include/configs/cm_t54.h b/include/configs/cm_t54.h
index 641ab48..92ce1e1 100644
--- a/include/configs/cm_t54.h
+++ b/include/configs/cm_t54.h
@@ -16,7 +16,6 @@
#include <configs/ti_omap5_common.h>
-#undef CONFIG_MISC_INIT_R
#undef CONFIG_SPL_OS_BOOT
/* Enable Generic board */
diff --git a/include/configs/colibri_t30.h b/include/configs/colibri_t30.h
index a582e25..ce6f23b 100644
--- a/include/configs/colibri_t30.h
+++ b/include/configs/colibri_t30.h
@@ -25,10 +25,7 @@
/* I2C */
#define CONFIG_SYS_I2C_TEGRA
-#define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C
/* SD/MMC */
#define CONFIG_MMC
diff --git a/include/configs/dalmore.h b/include/configs/dalmore.h
index ff7ec4a..0b04ee6 100644
--- a/include/configs/dalmore.h
+++ b/include/configs/dalmore.h
@@ -36,12 +36,7 @@
/* I2C */
#define CONFIG_SYS_I2C_TEGRA
-#define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_MAX_I2C_BUS TEGRA_I2C_NUM_CONTROLLERS
-#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C
/* SD/MMC */
#define CONFIG_MMC
diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index ca62461..930b08e 100644
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -299,7 +299,7 @@
#define CONFIG_SPL_FAT_SUPPORT
#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
-#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
#define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index 2eaabde..174a711 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -50,6 +50,7 @@
#define CONFIG_EFI_PARTITION
#define CONFIG_PARTITION_UUIDS
#define CONFIG_CMD_PART
+#define CONFIG_HSMMC2_8BIT
/* CPSW Ethernet */
#define CONFIG_CMD_NET /* 'bootp' and 'tftp' */
diff --git a/include/configs/gose.h b/include/configs/gose.h
index c347e45..44c8a30 100644
--- a/include/configs/gose.h
+++ b/include/configs/gose.h
@@ -91,4 +91,14 @@
#define CONFIG_USB_EHCI_RMOBILE
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+/* Module stop status bits */
+/* INTC-RT */
+#define CONFIG_SMSTP0_ENA 0x00400000
+/* MSIF */
+#define CONFIG_SMSTP2_ENA 0x00002000
+/* INTC-SYS, IRQC */
+#define CONFIG_SMSTP4_ENA 0x00000180
+/* SCIF0 */
+#define CONFIG_SMSTP7_ENA 0x00200000
+
#endif /* __GOSE_H */
diff --git a/include/configs/hermes.h b/include/configs/hermes.h
deleted file mode 100644
index 736ffb61..0000000
--- a/include/configs/hermes.h
+++ /dev/null
@@ -1,315 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC860 1 /* This is a MPC860T CPU */
-#define CONFIG_HERMES 1 /* ...on a HERMES-PRO board */
-
-#define CONFIG_SYS_TEXT_BASE 0xFE000000
-
-#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
-#undef CONFIG_8xx_CONS_SMC2
-#undef CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE 9600
-#if 0
-#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
-#else
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#endif
-
-#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
-
-#define CONFIG_BOARD_TYPES 1 /* support board types */
-
-#define CONFIG_SHOW_BOOT_PROGRESS 1 /* Show boot progress on LEDs */
-
-#undef CONFIG_BOOTARGS
-#define CONFIG_BOOTCOMMAND \
- "bootp; " \
- "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
- "bootm"
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x00F00000 /* 1 ... 15MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */
-
-#define CONFIG_SYS_PIO_MODE 0 /* IDE interface in PIO Mode 0 */
-
-#define CONFIG_SYS_ALLOC_DPRAM 1 /* use allocation routines */
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR 0xFF000000 /* Non-Standard value! */
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE 0xFE000000
-#ifdef DEBUG
-#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#else
-#define CONFIG_SYS_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */
-#endif
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 124 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_OFFSET 0x4000 /* Offset of Environment Sector */
-#define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control 11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- * +0x0004
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
- SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration 11-6
- *-----------------------------------------------------------------------
- * +0x0000 => 0x000000C0
- */
-#define CONFIG_SYS_SIUMCR 0
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control 11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- * +0x0200 => 0x00C2
- */
-#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control 11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- * +0x0240 => 0x0082
- */
-#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
- *-----------------------------------------------------------------------
- * Reset PLL lock status sticky bit, timer expired status bit and timer
- * interrupt status bit, set PLL multiplication factor !
- */
-/* +0x0286 => 0x00B0D0C0 */
-#define CONFIG_SYS_PLPRCR \
- ( (11 << PLPRCR_MF_SHIFT) | \
- PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST | \
- /*PLPRCR_CSRC|*/ PLPRCR_LPM_NORMAL | \
- PLPRCR_CSR | PLPRCR_LOLRE /*|PLPRCR_FIOPD*/ \
- )
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register 15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- */
-#define SCCR_MASK SCCR_EBDF11
-/* +0x0282 => 0x03800000 */
-#define CONFIG_SYS_SCCR (SCCR_COM00 | SCCR_TBS | \
- SCCR_RTDIV | SCCR_RTSEL | \
- /*SCCR_CRQEN|*/ /*SCCR_PRQEN|*/ \
- SCCR_EBDF00 | SCCR_DFSYNC00 | \
- SCCR_DFBRG00 | SCCR_DFNL000 | \
- SCCR_DFNH000)
-
-/*-----------------------------------------------------------------------
- * RTCSC - Real-Time Clock Status and Control Register 11-27
- *-----------------------------------------------------------------------
- */
-/* +0x0220 => 0x00C3 */
-#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
-
-
-/*-----------------------------------------------------------------------
- * RCCR - RISC Controller Configuration Register 19-4
- *-----------------------------------------------------------------------
- */
-/* +0x09C4 => TIMEP=1 */
-#define CONFIG_SYS_RCCR 0x0100
-
-/*-----------------------------------------------------------------------
- * RMDS - RISC Microcode Development Support Control Register
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RMDS 0
-
-/*-----------------------------------------------------------------------
- *
- *-----------------------------------------------------------------------
- *
- */
-#define CONFIG_SYS_DER 0
-
-/*
- * Init Memory Controller:
- *
- * BR0 and OR0 (FLASH)
- */
-
-#define FLASH_BASE0_PRELIM 0xFE000000 /* FLASH bank #0 */
-
-/* used to re-map FLASH
- * restrict access enough to keep SRAM working (if any)
- * but not too much to meddle with FLASH accesses
- */
-/* allow for max 4 MB of Flash */
-#define CONFIG_SYS_REMAP_OR_AM 0xFFC00000 /* OR addr mask */
-#define CONFIG_SYS_PRELIM_OR_AM 0xFFC00000 /* OR addr mask */
-
-/* FLASH timing: ACS = 11, TRLX = 1, CSNT = 1, SCY = 5, EHTR = 0 */
-#define CONFIG_SYS_OR_TIMING_FLASH ( OR_CSNT_SAM | /*OR_ACS_DIV4 |*/ OR_BI | \
- OR_SCY_5_CLK | OR_TRLX)
-
-#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-/* 8 bit, bank valid */
-#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
-
-/*
- * BR1/OR1 - SDRAM
- *
- * Multiplexed addresses, GPL5 output to GPL5_A (don't care)
- */
-#define SDRAM_BASE_PRELIM 0x00000000 /* SDRAM bank */
-#define SDRAM_PRELIM_OR_AM 0xF8000000 /* map max. 128 MB */
-#define SDRAM_TIMING 0x00000A00 /* SDRAM-Timing */
-
-#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB SDRAM */
-
-#define CONFIG_SYS_OR1_PRELIM (SDRAM_PRELIM_OR_AM | SDRAM_TIMING )
-#define CONFIG_SYS_BR1_PRELIM ((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
-
-/*
- * BR2/OR2 - HPRO2: PEB2256 @ 0xE0000000, 8 Bit wide
- */
-#define HPRO2_BASE 0xE0000000
-#define HPRO2_OR_AM 0xFFFF8000
-#define HPRO2_TIMING 0x00000934
-
-#define CONFIG_SYS_OR2 (HPRO2_OR_AM | HPRO2_TIMING)
-#define CONFIG_SYS_BR2 ((HPRO2_BASE & BR_BA_MSK) | BR_PS_8 | BR_V )
-
-/*
- * BR3/OR3: not used
- * BR4/OR4: not used
- * BR5/OR5: not used
- * BR6/OR6: not used
- * BR7/OR7: not used
- */
-
-/*
- * MAMR settings for SDRAM
- */
-
-/* periodic timer for refresh */
-#define CONFIG_SYS_MAMR_PTA 97 /* start with divider for 100 MHz */
-
-/* 8 column SDRAM */
-#define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
- MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-/* 9 column SDRAM */
-#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
- MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
- MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
-#endif /* __CONFIG_H */
diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h
index 5a5f940..1b9c277 100644
--- a/include/configs/imx6_spl.h
+++ b/include/configs/imx6_spl.h
@@ -28,7 +28,6 @@
#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/omap-common/u-boot-spl.lds"
#define CONFIG_SPL_TEXT_BASE 0x00908000
#define CONFIG_SPL_MAX_SIZE 0x10000
-#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/armv7"
#define CONFIG_SPL_STACK 0x0091FFB8
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
@@ -46,7 +45,7 @@
#if defined(CONFIG_SPL_MMC_SUPPORT)
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 138 /* offset 69KB */
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 800 /* 400 KB */
-#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SYS_MONITOR_LEN (CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS/2*1024)
#endif
diff --git a/include/configs/jetson-tk1.h b/include/configs/jetson-tk1.h
index d67c025..a7d7665 100644
--- a/include/configs/jetson-tk1.h
+++ b/include/configs/jetson-tk1.h
@@ -25,12 +25,7 @@
/* I2C */
#define CONFIG_SYS_I2C_TEGRA
-#define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_MAX_I2C_BUS TEGRA_I2C_NUM_CONTROLLERS
-#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C
/* SD/MMC */
#define CONFIG_MMC
diff --git a/include/configs/km82xx.h b/include/configs/km82xx.h
index 69ba66a..14fd290 100644
--- a/include/configs/km82xx.h
+++ b/include/configs/km82xx.h
@@ -207,9 +207,6 @@
""
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#define CONFIG_SYS_RAMBOOT
-#endif
#define CONFIG_SYS_MONITOR_LEN (768 << 10)
diff --git a/include/configs/koelsch.h b/include/configs/koelsch.h
index bb98302..c14889c 100644
--- a/include/configs/koelsch.h
+++ b/include/configs/koelsch.h
@@ -92,4 +92,15 @@
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_USB_STORAGE
+
+/* Module stop status bits */
+/* INTC-RT */
+#define CONFIG_SMSTP0_ENA 0x00400000
+/* MSIF*/
+#define CONFIG_SMSTP2_ENA 0x00002000
+/* INTC-SYS, IRQC */
+#define CONFIG_SMSTP4_ENA 0x00000180
+/* SCIF0 */
+#define CONFIG_SMSTP7_ENA 0x00200000
+
#endif /* __KOELSCH_H */
diff --git a/include/configs/lager.h b/include/configs/lager.h
index 37be38f..291267f 100644
--- a/include/configs/lager.h
+++ b/include/configs/lager.h
@@ -93,4 +93,23 @@
#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
#define CONFIG_USB_STORAGE
+/* MMC */
+#define CONFIG_MMC
+#define CONFIG_CMD_MMC
+#define CONFIG_GENERIC_MMC
+
+#define CONFIG_SH_MMCIF
+#define CONFIG_SH_MMCIF_ADDR 0xEE220000
+#define CONFIG_SH_MMCIF_CLK 97500000
+
+/* Module stop status bits */
+/* INTC-RT */
+#define CONFIG_SMSTP0_ENA 0x00400000
+/* MSIF */
+#define CONFIG_SMSTP2_ENA 0x00002000
+/* INTC-SYS, IRQC */
+#define CONFIG_SMSTP4_ENA 0x00000180
+/* SCIF0 */
+#define CONFIG_SMSTP7_ENA 0x00200000
+
#endif /* __LAGER_H */
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 48e10ec..8dc04f2 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -37,8 +37,85 @@ unsigned long get_board_sys_clk(void);
unsigned long get_board_ddr_clk(void);
#endif
+#ifdef CONFIG_QSPI_BOOT
+#define CONFIG_SYS_CLK_FREQ 100000000
+#define CONFIG_DDR_CLK_FREQ 100000000
+#define CONFIG_QIXIS_I2C_ACCESS
+#else
#define CONFIG_SYS_CLK_FREQ get_board_sys_clk()
#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk()
+#endif
+
+#ifdef CONFIG_RAMBOOT_PBL
+#define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1021aqds/ls102xa_pbi.cfg
+#endif
+
+#ifdef CONFIG_SD_BOOT
+#define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds"
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_ENV_SUPPORT
+#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_WATCHDOG_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400
+
+#define CONFIG_SPL_TEXT_BASE 0x10000000
+#define CONFIG_SPL_MAX_SIZE 0x1a000
+#define CONFIG_SPL_STACK 0x1001d000
+#define CONFIG_SPL_PAD_TO 0x1c000
+#define CONFIG_SYS_TEXT_BASE 0x82000000
+
+#define CONFIG_SYS_SPL_MALLOC_START 0x80200000
+#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
+#define CONFIG_SPL_BSS_START_ADDR 0x80100000
+#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
+#define CONFIG_SYS_MONITOR_LEN 0x80000
+#endif
+
+#ifdef CONFIG_QSPI_BOOT
+#define CONFIG_SYS_TEXT_BASE 0x40010000
+#define CONFIG_SYS_NO_FLASH
+#endif
+
+#ifdef CONFIG_NAND_BOOT
+#define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds"
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_ENV_SUPPORT
+#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_WATCHDOG_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
+
+#define CONFIG_SPL_TEXT_BASE 0x10000000
+#define CONFIG_SPL_MAX_SIZE 0x1a000
+#define CONFIG_SPL_STACK 0x1001d000
+#define CONFIG_SPL_PAD_TO 0x1c000
+#define CONFIG_SYS_TEXT_BASE 0x82000000
+
+#define CONFIG_SYS_NAND_U_BOOT_SIZE (400 << 10)
+#define CONFIG_SYS_NAND_U_BOOT_OFFS CONFIG_SPL_PAD_TO
+#define CONFIG_SYS_NAND_PAGE_SIZE 2048
+#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
+
+#define CONFIG_SYS_SPL_MALLOC_START 0x80200000
+#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
+#define CONFIG_SPL_BSS_START_ADDR 0x80100000
+#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
+#define CONFIG_SYS_MONITOR_LEN 0x80000
+#endif
#ifndef CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_TEXT_BASE 0x67f80000
@@ -71,13 +148,15 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_FSL_CAAM /* Enable CAAM */
-#if !defined(CONFIG_SDCARD) && !defined(CONFIG_NAND) && !defined(CONFIG_SPI)
+#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
+ !defined(CONFIG_QSPI_BOOT)
#define CONFIG_U_QE
#endif
/*
* IFC Definitions
*/
+#ifndef CONFIG_QSPI_BOOT
#define CONFIG_FSL_IFC
#define CONFIG_SYS_FLASH_BASE 0x60000000
#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
@@ -170,6 +249,7 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_CMD_NAND
#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
+#endif
/*
* QIXIS Definitions
@@ -214,6 +294,40 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_SYS_FPGA_FTIM3 0x0
#endif
+#if defined(CONFIG_NAND_BOOT)
+#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT
+#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR
+#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK
+#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR
+#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0
+#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1
+#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2
+#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3
+#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT
+#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR
+#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK
+#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR
+#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0
+#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1
+#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2
+#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3
+#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR1_CSPR_EXT
+#define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR
+#define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK
+#define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR
+#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0
+#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1
+#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2
+#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3
+#define CONFIG_SYS_CSPR3_EXT CONFIG_SYS_FPGA_CSPR_EXT
+#define CONFIG_SYS_CSPR3 CONFIG_SYS_FPGA_CSPR
+#define CONFIG_SYS_AMASK3 CONFIG_SYS_FPGA_AMASK
+#define CONFIG_SYS_CSOR3 CONFIG_SYS_FPGA_CSOR
+#define CONFIG_SYS_CS3_FTIM0 CONFIG_SYS_FPGA_FTIM0
+#define CONFIG_SYS_CS3_FTIM1 CONFIG_SYS_FPGA_FTIM1
+#define CONFIG_SYS_CS3_FTIM2 CONFIG_SYS_FPGA_FTIM2
+#define CONFIG_SYS_CS3_FTIM3 CONFIG_SYS_FPGA_FTIM3
+#else
#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT
#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR
#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK
@@ -246,6 +360,7 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_SYS_CS3_FTIM1 CONFIG_SYS_FPGA_FTIM1
#define CONFIG_SYS_CS3_FTIM2 CONFIG_SYS_FPGA_FTIM2
#define CONFIG_SYS_CS3_FTIM3 CONFIG_SYS_FPGA_FTIM3
+#endif
/*
* Serial Port
@@ -279,6 +394,21 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_FSL_ESDHC
#define CONFIG_GENERIC_MMC
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+
+/* QSPI */
+#ifdef CONFIG_QSPI_BOOT
+#define CONFIG_FSL_QSPI
+#define QSPI0_AMBA_BASE 0x40000000
+#define FSL_QSPI_FLASH_SIZE (1 << 24)
+#define FSL_QSPI_FLASH_NUM 2
+
+#define CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_SPANSION
+#endif
+
/*
* USB
*/
@@ -341,6 +471,14 @@ unsigned long get_board_ddr_clk(void);
#endif
#endif
+
+/* PCIe */
+#define CONFIG_PCI /* Enable PCI/PCIE */
+#define CONFIG_PCIE1 /* PCIE controler 1 */
+#define CONFIG_PCIE2 /* PCIE controler 2 */
+#define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */
+#define FSL_PCIE_COMPAT "fsl,ls1021a-pcie"
+
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_MII
@@ -348,7 +486,20 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_CMDLINE_TAG
#define CONFIG_CMDLINE_EDITING
+
+#ifdef CONFIG_QSPI_BOOT
+#undef CONFIG_CMD_IMLS
+#else
#define CONFIG_CMD_IMLS
+#endif
+
+#define CONFIG_ARMV7_NONSEC
+#define CONFIG_ARMV7_VIRT
+#define CONFIG_PEN_ADDR_BIG_ENDIAN
+#define CONFIG_LS102XA_NS_ACCESS
+#define CONFIG_SMP_PEN_ADDR 0x01ee0200
+#define CONFIG_TIMER_CLK_FREQ 12500000
+#define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR
#define CONFIG_HWCONFIG
#define HWCONFIG_BUFFER_SIZE 128
@@ -385,6 +536,8 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_SYS_LOAD_ADDR 0x82000000
+#define CONFIG_LS102XA_STREAM_ID
+
/*
* Stack sizes
* The stack sizes are set up in start.S using the settings below
@@ -396,17 +549,37 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
+#else
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
+#endif
/*
* Environment
*/
#define CONFIG_ENV_OVERWRITE
+#if defined(CONFIG_SD_BOOT)
+#define CONFIG_ENV_OFFSET 0x100000
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#define CONFIG_ENV_SIZE 0x2000
+#elif defined(CONFIG_QSPI_BOOT)
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SIZE 0x2000 /* 8KB */
+#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */
+#define CONFIG_ENV_SECT_SIZE 0x10000
+#elif defined(CONFIG_NAND_BOOT)
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_SIZE 0x2000
+#define CONFIG_ENV_OFFSET (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
+#else
#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_SIZE 0x2000
#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
+#endif
#define CONFIG_OF_LIBFDT
#define CONFIG_OF_BOARD_SETUP
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index 3eac7ee..66954d0 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -35,6 +35,43 @@
#define CONFIG_SYS_CLK_FREQ 100000000
#define CONFIG_DDR_CLK_FREQ 100000000
+#ifdef CONFIG_RAMBOOT_PBL
+#define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1021atwr/ls102xa_pbi.cfg
+#endif
+
+#ifdef CONFIG_SD_BOOT
+#define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds"
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_ENV_SUPPORT
+#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_WATCHDOG_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400
+
+#define CONFIG_SPL_TEXT_BASE 0x10000000
+#define CONFIG_SPL_MAX_SIZE 0x1a000
+#define CONFIG_SPL_STACK 0x1001d000
+#define CONFIG_SPL_PAD_TO 0x1c000
+#define CONFIG_SYS_TEXT_BASE 0x82000000
+
+#define CONFIG_SYS_SPL_MALLOC_START 0x80200000
+#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
+#define CONFIG_SPL_BSS_START_ADDR 0x80100000
+#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
+#define CONFIG_SYS_MONITOR_LEN 0x80000
+#endif
+
+#ifdef CONFIG_QSPI_BOOT
+#define CONFIG_SYS_TEXT_BASE 0x40010000
+#define CONFIG_SYS_NO_FLASH
+#endif
+
#ifndef CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_TEXT_BASE 0x67f80000
#endif
@@ -50,13 +87,15 @@
#define CONFIG_FSL_CAAM /* Enable CAAM */
-#if !defined(CONFIG_SDCARD) && !defined(CONFIG_NAND) && !defined(CONFIG_SPI)
+#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
+ !defined(CONFIG_QSPI_BOOT)
#define CONFIG_U_QE
#endif
/*
* IFC Definitions
*/
+#ifndef CONFIG_QSPI_BOOT
#define CONFIG_FSL_IFC
#define CONFIG_SYS_FLASH_BASE 0x60000000
#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
@@ -100,6 +139,7 @@
#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
#define CONFIG_SYS_WRITE_SWAPPED_DATA
+#endif
/* CPLD */
@@ -180,6 +220,21 @@
#define CONFIG_FSL_ESDHC
#define CONFIG_GENERIC_MMC
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+
+/* QSPI */
+#ifdef CONFIG_QSPI_BOOT
+#define CONFIG_FSL_QSPI
+#define QSPI0_AMBA_BASE 0x40000000
+#define FSL_QSPI_FLASH_SIZE (1 << 24)
+#define FSL_QSPI_FLASH_NUM 2
+
+#define CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_STMICRO
+#endif
+
/*
* Video
*/
@@ -236,6 +291,13 @@
#define CONFIG_HAS_ETH2
#endif
+/* PCIe */
+#define CONFIG_PCI /* Enable PCI/PCIE */
+#define CONFIG_PCIE1 /* PCIE controler 1 */
+#define CONFIG_PCIE2 /* PCIE controler 2 */
+#define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */
+#define FSL_PCIE_COMPAT "fsl,ls1021a-pcie"
+
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_MII
@@ -243,7 +305,20 @@
#define CONFIG_CMDLINE_TAG
#define CONFIG_CMDLINE_EDITING
+
+#ifdef CONFIG_QSPI_BOOT
+#undef CONFIG_CMD_IMLS
+#else
#define CONFIG_CMD_IMLS
+#endif
+
+#define CONFIG_ARMV7_NONSEC
+#define CONFIG_ARMV7_VIRT
+#define CONFIG_PEN_ADDR_BIG_ENDIAN
+#define CONFIG_LS102XA_NS_ACCESS
+#define CONFIG_SMP_PEN_ADDR 0x01ee0200
+#define CONFIG_TIMER_CLK_FREQ 12500000
+#define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR
#define CONFIG_HWCONFIG
#define HWCONFIG_BUFFER_SIZE 128
@@ -277,6 +352,8 @@
#define CONFIG_SYS_LOAD_ADDR 0x82000000
+#define CONFIG_LS102XA_STREAM_ID
+
/*
* Stack sizes
* The stack sizes are set up in start.S using the settings below
@@ -288,7 +365,11 @@
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
+#else
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
+#endif
#define CONFIG_SYS_QE_FW_ADDR 0x67f40000
@@ -297,10 +378,22 @@
*/
#define CONFIG_ENV_OVERWRITE
+#if defined(CONFIG_SD_BOOT)
+#define CONFIG_ENV_OFFSET 0x100000
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#define CONFIG_ENV_SIZE 0x20000
+#elif defined(CONFIG_QSPI_BOOT)
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SIZE 0x2000
+#define CONFIG_ENV_OFFSET 0x100000
+#define CONFIG_ENV_SECT_SIZE 0x10000
+#else
#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_SIZE 0x20000
#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
+#endif
#define CONFIG_OF_LIBFDT
#define CONFIG_OF_BOARD_SETUP
diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index 58e7295..d43db52 100644
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -671,8 +671,6 @@
#define CONFIG_SPL_TEXT_BASE 0xffff0000 /* last 64 KiB for SPL */
#define CONFIG_SYS_SPL_MAX_LEN (64 << 10)
#define CONFIG_UBOOT_PAD_TO 458752 /* decimal for 'dd' */
-#define CONFIG_SPL_START_S_PATH "arch/powerpc/cpu/ppc4xx"
-#define CONFIG_SPL_LDSCRIPT "arch/powerpc/cpu/ppc4xx/u-boot-spl.lds"
#define CONFIG_SPL_LIBCOMMON_SUPPORT /* image.c */
#define CONFIG_SPL_LIBGENERIC_SUPPORT /* string.c */
#define CONFIG_SPL_SERIAL_SUPPORT
diff --git a/include/configs/mcx.h b/include/configs/mcx.h
index b775ebd..26eb220 100644
--- a/include/configs/mcx.h
+++ b/include/configs/mcx.h
@@ -369,7 +369,7 @@
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
-#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
/* NAND boot config */
diff --git a/include/configs/muas3001.h b/include/configs/muas3001.h
index 7343c94..df2ecc1 100644
--- a/include/configs/muas3001.h
+++ b/include/configs/muas3001.h
@@ -206,10 +206,6 @@
#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#define CONFIG_SYS_RAMBOOT
-#endif
-
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256KB for Monitor */
#define CONFIG_ENV_IS_IN_FLASH
diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
index 10fb1f4..42bc3c8 100644
--- a/include/configs/mx53loco.h
+++ b/include/configs/mx53loco.h
@@ -94,6 +94,7 @@
/* Command definition */
#include <config_cmd_default.h>
#define CONFIG_CMD_BOOTZ
+#define CONFIG_SUPPORT_RAW_INITRD
#undef CONFIG_CMD_IMLS
diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h
index 9fdd841..f0f721e 100644
--- a/include/configs/mx6sabre_common.h
+++ b/include/configs/mx6sabre_common.h
@@ -220,9 +220,6 @@
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_CBSIZE 256
-
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h
index 271548c..e3e7f76 100644
--- a/include/configs/mx6slevk.h
+++ b/include/configs/mx6slevk.h
@@ -209,6 +209,20 @@
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
#endif
+/* USB Configs */
+#define CONFIG_CMD_USB
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MX6
+#define CONFIG_USB_STORAGE
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS 0
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+#endif
+
#define CONFIG_SYS_FSL_USDHC_NUM 3
#if defined(CONFIG_ENV_IS_IN_MMC)
#define CONFIG_SYS_MMC_ENV_DEV 1 /* SDHC2*/
diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h
index d8ab291..61a7a7a 100644
--- a/include/configs/mx6sxsabresd.h
+++ b/include/configs/mx6sxsabresd.h
@@ -198,6 +198,20 @@
#define CONFIG_PHYLIB
#define CONFIG_PHY_ATHEROS
+
+#define CONFIG_CMD_USB
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MX6
+#define CONFIG_USB_STORAGE
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS 0
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+#endif
+
#define CONFIG_CMD_PCI
#ifdef CONFIG_CMD_PCI
#define CONFIG_PCI
@@ -208,6 +222,16 @@
#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(2, 1)
#endif
+#define CONFIG_DM
+#define CONFIG_DM_THERMAL
+#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
+#define CONFIG_IMX6_THERMAL
+
+#define CONFIG_CMD_FUSE
+#if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL)
+#define CONFIG_MXC_OCOTP
+#endif
+
/* FLASH and environment organization */
#define CONFIG_SYS_NO_FLASH
diff --git a/include/configs/nyan-big.h b/include/configs/nyan-big.h
new file mode 100644
index 0000000..cf331ab
--- /dev/null
+++ b/include/configs/nyan-big.h
@@ -0,0 +1,74 @@
+/*
+ * (C) Copyright 2014
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <linux/sizes.h>
+
+#include "tegra124-common.h"
+
+/* High-level configuration options */
+#define V_PROMPT "Tegra124 (Nyan-big) # "
+#define CONFIG_TEGRA_BOARD_STRING "Google/NVIDIA Nyan-big"
+
+/* Board-specific serial config */
+#define CONFIG_SERIAL_MULTI
+#define CONFIG_TEGRA_ENABLE_UARTA
+#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
+
+#define CONFIG_BOARD_EARLY_INIT_F
+
+/* I2C */
+#define CONFIG_SYS_I2C_TEGRA
+#define CONFIG_CMD_I2C
+
+/* SD/MMC */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_TEGRA_MMC
+#define CONFIG_CMD_MMC
+
+/* Environment in eMMC, at the end of 2nd "boot sector" */
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#define CONFIG_SYS_MMC_ENV_PART 2
+#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE)
+
+/* SPI */
+#define CONFIG_TEGRA114_SPI /* Compatible w/ Tegra114 SPI */
+#define CONFIG_TEGRA114_SPI_CTRLS 6
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_WINBOND
+#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
+#define CONFIG_SF_DEFAULT_SPEED 24000000
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH_SIZE (4 << 20)
+
+/* USB Host support */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_USB
+
+/* USB networking support */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+
+/* General networking support */
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DHCP
+
+#define CONFIG_FIT
+#define CONFIG_OF_LIBFDT
+
+#include "tegra-common-usb-gadget.h"
+#include "tegra-common-post.h"
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
index 27bf89c..8bdc08f 100644
--- a/include/configs/omap3_evm.h
+++ b/include/configs/omap3_evm.h
@@ -75,7 +75,7 @@
#define CONFIG_SPL_FAT_SUPPORT
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
-#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
/* Partition tables */
diff --git a/include/configs/omap3_evm_quick_mmc.h b/include/configs/omap3_evm_quick_mmc.h
index 2daf13c..1185f42 100644
--- a/include/configs/omap3_evm_quick_mmc.h
+++ b/include/configs/omap3_evm_quick_mmc.h
@@ -87,7 +87,7 @@
#define CONFIG_SPL_FAT_SUPPORT
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
-#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#endif /* __OMAP3_EVM_QUICK_MMC_H */
diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h
index e8dc462..e07795f 100644
--- a/include/configs/omap5_uevm.h
+++ b/include/configs/omap5_uevm.h
@@ -23,6 +23,7 @@
#define CONFIG_SYS_NS16550_COM3 UART3_BASE
#define CONFIG_BAUDRATE 115200
+#define CONFIG_MISC_INIT_R
/* MMC ENV related defines */
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2: eMMC(1) */
diff --git a/include/configs/p1_twr.h b/include/configs/p1_twr.h
index 681bc92..9864c15 100644
--- a/include/configs/p1_twr.h
+++ b/include/configs/p1_twr.h
@@ -10,6 +10,8 @@
#ifndef __CONFIG_H
#define __CONFIG_H
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_DISPLAY_BOARDINFO
#if defined(CONFIG_TWR_P1025)
#define CONFIG_BOARDNAME "TWR-P1025"
#define CONFIG_P1025
diff --git a/include/configs/ph1_ld4.h b/include/configs/ph1_ld4.h
deleted file mode 100644
index 73a95e6..0000000
--- a/include/configs/ph1_ld4.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * Copyright (C) 2012-2014 Panasonic Corporation
- * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __PH1_XXX_H
-#define __PH1_XXX_H
-
-/*
- * Support Card Select
- *
- * CONFIG_PFC_MICRO_SUPPORT_CARD - Original Micro Support Card made by PFC.
- * CONFIG_DCC_MICRO_SUPPORT_CARD - DCC version Micro Support Card.
- * CPLD is re-programmed for ARIMA board compatibility.
- * No define - No support card.
- */
-
-#if 0
-#define CONFIG_PFC_MICRO_SUPPORT_CARD
-#else
-#define CONFIG_DCC_MICRO_SUPPORT_CARD
-#endif
-
-/*
- * Serial Configuration
- * SoC UART : enable CONFIG_UNIPHIER_SERIAL
- * On-board UART: enable CONFIG_SYS_NS16550_SERIAL
- */
-#if 0
-#define CONFIG_SYS_NS16550_SERIAL
-#endif
-
-#define CONFIG_SMC911X
-
-#define CONFIG_DDR_NUM_CH0 1
-#define CONFIG_DDR_NUM_CH1 1
-
-/*
- * Memory Size & Mapping
- */
-/* Physical start address of SDRAM */
-#define CONFIG_SDRAM0_BASE 0x80000000
-#define CONFIG_SDRAM0_SIZE 0x10000000
-#define CONFIG_SDRAM1_BASE 0x90000000
-#define CONFIG_SDRAM1_SIZE 0x10000000
-
-#define CONFIG_SPL_TEXT_BASE 0x40000
-
-#include "uniphier-common.h"
-
-#endif /* __PH1_XXX_H */
diff --git a/include/configs/ph1_pro4.h b/include/configs/ph1_pro4.h
deleted file mode 100644
index fc5132d..0000000
--- a/include/configs/ph1_pro4.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright (C) 2012-2014 Panasonic Corporation
- * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __PH1_XXX_H
-#define __PH1_XXX_H
-
-/*
- * Support Card Select
- *
- * CONFIG_PFC_MICRO_SUPPORT_CARD - Original Micro Support Card made by PFC.
- * CONFIG_DCC_MICRO_SUPPORT_CARD - DCC version Micro Support Card.
- * CPLD is re-programmed for ARIMA board compatibility.
- * No define - No support card.
- */
-
-#if 0
-#define CONFIG_PFC_MICRO_SUPPORT_CARD
-#else
-#define CONFIG_DCC_MICRO_SUPPORT_CARD
-#endif
-
-/*
- * Serial Configuration
- * SoC UART : enable CONFIG_UNIPHIER_SERIAL
- * On-board UART: enable CONFIG_SYS_NS16550_SERIAL
- */
-#if 0
-#define CONFIG_SYS_NS16550_SERIAL
-#endif
-
-#define CONFIG_SMC911X
-
-#define CONFIG_DDR_NUM_CH0 2
-#define CONFIG_DDR_NUM_CH1 2
-
-#define CONFIG_UNIPHIER_SMP
-
-/*
- * Memory Size & Mapping
- */
-/* Physical start address of SDRAM */
-#define CONFIG_SDRAM0_BASE 0x80000000
-#define CONFIG_SDRAM0_SIZE 0x20000000
-#define CONFIG_SDRAM1_BASE 0xa0000000
-#define CONFIG_SDRAM1_SIZE 0x20000000
-
-#define CONFIG_SPL_TEXT_BASE 0x100000
-
-#include "uniphier-common.h"
-
-#endif /* __PH1_XXX_H */
diff --git a/include/configs/ph1_sld8.h b/include/configs/ph1_sld8.h
deleted file mode 100644
index e2f1102..0000000
--- a/include/configs/ph1_sld8.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright (C) 2012-2014 Panasonic Corporation
- * Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __PH1_XXX_H
-#define __PH1_XXX_H
-
-/*
- * Support Card Select
- *
- * CONFIG_PFC_MICRO_SUPPORT_CARD - Original Micro Support Card made by PFC.
- * CONFIG_DCC_MICRO_SUPPORT_CARD - DCC version Micro Support Card.
- * CPLD is re-programmed for ARIMA board compatibility.
- * No define - No support card.
- */
-
-#if 0
-#define CONFIG_PFC_MICRO_SUPPORT_CARD
-#else
-#define CONFIG_DCC_MICRO_SUPPORT_CARD
-#endif
-
-/*
- * Serial Configuration
- * SoC UART : enable CONFIG_UNIPHIER_SERIAL
- * On-board UART: enable CONFIG_SYS_NS16550_SERIAL
- */
-#if 0
-#define CONFIG_SYS_NS16550_SERIAL
-#endif
-
-#define CONFIG_SMC911X
-
-#define CONFIG_DDR_NUM_CH0 1
-#define CONFIG_DDR_NUM_CH1 1
-
-/* #define CONFIG_DDR_STANDARD */
-
-/*
- * Memory Size & Mapping
- */
-/* Physical start address of SDRAM */
-#define CONFIG_SDRAM0_BASE 0x80000000
-#define CONFIG_SDRAM0_SIZE 0x10000000
-#define CONFIG_SDRAM1_BASE 0x90000000
-#define CONFIG_SDRAM1_SIZE 0x10000000
-
-#define CONFIG_SPL_TEXT_BASE 0x40000
-
-#include "uniphier-common.h"
-
-#endif /* __PH1_XXX_H */
diff --git a/include/configs/pxm2.h b/include/configs/pxm2.h
index d75d562..946b2c8 100644
--- a/include/configs/pxm2.h
+++ b/include/configs/pxm2.h
@@ -150,4 +150,8 @@
#define CONFIG_SYS_CONSOLE_FG_COL 0x00
#endif
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_FIT
+#endif
+
#endif /* ! __CONFIG_PXM2_H */
diff --git a/include/configs/rcar-gen2-common.h b/include/configs/rcar-gen2-common.h
index 46c7526..c33f1cb 100644
--- a/include/configs/rcar-gen2-common.h
+++ b/include/configs/rcar-gen2-common.h
@@ -28,6 +28,9 @@
#define CONFIG_CMD_FAT
#define CONFIG_CMD_SF
#define CONFIG_CMD_SPI
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_EXT4_WRITE
#define CONFIG_SYS_THUMB_BUILD
#define CONFIG_SYS_GENERIC_BOARD
@@ -36,6 +39,7 @@
#define CONFIG_FAT_WRITE
#define CONFIG_DOS_PARTITION
#define CONFIG_SUPPORT_VFAT
+#define CONFIG_FS_EXT4
#define CONFIG_EXT4_WRITE
#define CONFIG_CMDLINE_TAG
diff --git a/include/configs/rpi_b.h b/include/configs/rpi.h
index 41e975f..c94f411 100644
--- a/include/configs/rpi_b.h
+++ b/include/configs/rpi.h
@@ -34,6 +34,7 @@
#define CONFIG_DM
#define CONFIG_CMD_DM
#define CONFIG_DM_GPIO
+#define CONFIG_DM_SERIAL
/* Memory layout */
#define CONFIG_NR_DRAM_BANKS 1
@@ -51,6 +52,7 @@
CONFIG_SYS_SDRAM_SIZE - \
GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_MALLOC_LEN SZ_4M
+#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
#define CONFIG_SYS_MEMTEST_START 0x00100000
#define CONFIG_SYS_MEMTEST_END 0x00200000
#define CONFIG_LOADADDR 0x00200000
@@ -92,9 +94,7 @@
#endif
/* Console UART */
-#define CONFIG_PL011_SERIAL
-#define CONFIG_PL011_CLOCK 3000000
-#define CONFIG_PL01x_PORTS { (void *)0x20201000 }
+#define CONFIG_PL01X_SERIAL
#define CONFIG_CONS_INDEX 0
#define CONFIG_BAUDRATE 115200
@@ -105,15 +105,15 @@
/* Environment */
#define CONFIG_ENV_SIZE SZ_16K
-#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_IS_IN_FAT
+#define FAT_ENV_INTERFACE "mmc"
+#define FAT_ENV_DEVICE_AND_PART "0:1"
+#define FAT_ENV_FILE "uboot.env"
+#define CONFIG_FAT_WRITE
#define CONFIG_ENV_VARS_UBOOT_CONFIG
#define CONFIG_SYS_LOAD_ADDR 0x1000000
#define CONFIG_CONSOLE_MUX
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_PREBOOT \
- "if load mmc 0:1 ${loadaddr} /uEnv.txt; then " \
- "env import -t -r ${loadaddr} ${filesize}; " \
- "fi"
/* Shell */
#define CONFIG_SYS_MAXARGS 8
@@ -138,7 +138,6 @@
/* Some things don't make sense on this HW or yet */
#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_SAVEENV
/* Environment */
#define ENV_DEVICE_SETTINGS \
@@ -175,7 +174,6 @@
"pxefile_addr_r=0x00100000\0" \
"kernel_addr_r=0x01000000\0" \
"fdt_addr_r=0x02000000\0" \
- "fdtfile=bcm2835-rpi-b.dtb\0" \
"ramdisk_addr_r=0x02100000\0" \
#define BOOT_TARGET_DEVICES(func) \
diff --git a/include/configs/rut.h b/include/configs/rut.h
index 6bddede..0067ea4 100644
--- a/include/configs/rut.h
+++ b/include/configs/rut.h
@@ -154,4 +154,8 @@
#define CONFIG_SYS_CONSOLE_FG_COL 0x00
#endif
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_FIT
+#endif
+
#endif /* ! __CONFIG_RUT_H */
diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h
index 5b77db2..d5588b1 100644
--- a/include/configs/sama5d3_xplained.h
+++ b/include/configs/sama5d3_xplained.h
@@ -230,7 +230,7 @@
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
-#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#define CONFIG_SPL_FAT_SUPPORT
#define CONFIG_SPL_LIBDISK_SUPPORT
diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h
index dfbf3cb..f2849d7 100644
--- a/include/configs/sama5d3xek.h
+++ b/include/configs/sama5d3xek.h
@@ -276,7 +276,7 @@
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
-#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#define CONFIG_SPL_FAT_SUPPORT
#define CONFIG_SPL_LIBDISK_SUPPORT
diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h
index 2b03841..657f751 100644
--- a/include/configs/sandbox.h
+++ b/include/configs/sandbox.h
@@ -112,6 +112,12 @@
#define CONFIG_SPI_FLASH_STMICRO
#define CONFIG_SPI_FLASH_WINBOND
+#define CONFIG_DM_I2C
+#define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C_SANDBOX
+#define CONFIG_I2C_EDID
+#define CONFIG_I2C_EEPROM
+
/* Memory things - we don't really want a memory test */
#define CONFIG_SYS_LOAD_ADDR 0x00000000
#define CONFIG_SYS_MEMTEST_START 0x00100000
diff --git a/include/configs/seaboard.h b/include/configs/seaboard.h
index 04e4f82..5f77051 100644
--- a/include/configs/seaboard.h
+++ b/include/configs/seaboard.h
@@ -37,10 +37,7 @@
/* I2C */
#define CONFIG_SYS_I2C_TEGRA
-#define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C
/* SD/MMC */
#define CONFIG_MMC
diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h
index 0d5dba1..21e13e5 100644
--- a/include/configs/siemens-am33x-common.h
+++ b/include/configs/siemens-am33x-common.h
@@ -148,7 +148,7 @@
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
-#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SPL_FAT_SUPPORT
diff --git a/include/configs/stv0991.h b/include/configs/stv0991.h
new file mode 100644
index 0000000..fd9bd63
--- /dev/null
+++ b/include/configs/stv0991.h
@@ -0,0 +1,95 @@
+/*
+ * (C) Copyright 2014
+ * Vikas Manocha, STMicroelectronics, <vikas.manocha@st.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_STV0991_H
+#define __CONFIG_STV0991_H
+#define CONFIG_SYS_DCACHE_OFF
+#define CONFIG_SYS_EXCEPTION_VECTORS_HIGH
+#define CONFIG_BOARD_EARLY_INIT_F
+
+#define CONFIG_SYS_CORTEX_R4
+
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_SYS_NO_FLASH
+
+/* ram memory-related information */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM_1 0x00000000
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define PHYS_SDRAM_1_SIZE 0x00198000
+
+#define CONFIG_ENV_SIZE 0x10000
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_ADDR \
+ (PHYS_SDRAM_1_SIZE - CONFIG_ENV_SIZE)
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 16 * 1024)
+#define CONFIG_SYS_MALLOC_F_LEN 0x2000
+
+#define CONFIG_DM
+/* serial port (PL011) configuration */
+#define CONFIG_BAUDRATE 115200
+#ifdef CONFIG_DM
+#define CONFIG_DM_SERIAL
+#define CONFIG_PL01X_SERIAL
+#else
+#define CONFIG_SYS_SERIAL0 0x80406000
+#define CONFIG_CONS_INDEX 0
+#define CONFIG_PL011_SERIAL
+#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0}
+#define CONFIG_PL011_CLOCK (2700 * 1000)
+#endif
+
+/* user interface */
+#define CONFIG_SYS_PROMPT "STV0991> "
+#define CONFIG_SYS_CBSIZE 1024
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
+ +sizeof(CONFIG_SYS_PROMPT) + 16)
+
+/* MISC */
+#define CONFIG_SYS_LOAD_ADDR 0x00000000
+#define CONFIG_SYS_INIT_RAM_SIZE 0x8000
+#define CONFIG_SYS_INIT_RAM_ADDR 0x00190000
+#define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+/* U-boot Load Address */
+#define CONFIG_SYS_TEXT_BASE 0x00010000
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+/* GMAC related configs */
+
+#define CONFIG_MII
+#define CONFIG_PHYLIB
+#define CONFIG_CMD_NET
+#define CONFIG_DESIGNWARE_ETH
+#define CONFIG_DW_ALTDESCRIPTOR
+#define CONFIG_PHY_MICREL
+
+/* Command support defines */
+#define CONFIG_CMD_PING
+#define CONFIG_PHY_RESET_DELAY 10000 /* in usec */
+
+#include "config_cmd_default.h"
+#undef CONFIG_CMD_SAVEENV
+
+#define CONFIG_SYS_MEMTEST_START 0x0000
+#define CONFIG_SYS_MEMTEST_END 1024*1024
+#define CONFIG_CMD_MEMTEST
+
+/* Misc configuration */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING
+
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_BOOTCOMMAND "go 0x40040000"
+#define CONFIG_AUTOBOOT_KEYED
+#define CONFIG_AUTOBOOT_STOP_STR " "
+#define CONFIG_AUTOBOOT_PROMPT \
+ "Hit SPACE in %d seconds to stop autoboot.\n", bootdelay
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/sun7i.h b/include/configs/sun7i.h
index f6b1b3e..ccec50c 100644
--- a/include/configs/sun7i.h
+++ b/include/configs/sun7i.h
@@ -25,6 +25,7 @@
#define CONFIG_ARMV7_PSCI 1
#define CONFIG_ARMV7_SECURE_BASE SUNXI_SRAM_B_BASE
#define CONFIG_SYS_CLK_FREQ 24000000
+#define CONFIG_TIMER_CLK_FREQ CONFIG_SYS_CLK_FREQ
/*
* Include common sunxi configuration where most the settings are
diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h
index a160329..7d2c0d2 100644
--- a/include/configs/tao3530.h
+++ b/include/configs/tao3530.h
@@ -304,7 +304,7 @@
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
-#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#define CONFIG_SPL_BOARD_INIT
diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h
index 6ab2184..c097b98 100644
--- a/include/configs/tbs2910.h
+++ b/include/configs/tbs2910.h
@@ -167,7 +167,7 @@
#define CONFIG_USB_STORAGE
#define CONFIG_USB_KEYBOARD
#ifdef CONFIG_USB_KEYBOARD
-#define CONFIG_SYS_USB_EVENT_POLL
+#define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE
#define CONFIG_SYS_STDIO_DEREGISTER
#define CONFIG_PREBOOT "if hdmidet; then usb start; fi"
#endif /* CONFIG_USB_KEYBOARD */
diff --git a/include/configs/tec-ng.h b/include/configs/tec-ng.h
index 51f87da..e37b233 100644
--- a/include/configs/tec-ng.h
+++ b/include/configs/tec-ng.h
@@ -23,12 +23,7 @@
/* I2C */
#define CONFIG_SYS_I2C_TEGRA
-#define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_MAX_I2C_BUS TEGRA_I2C_NUM_CONTROLLERS
-#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C
/* SD/MMC */
#define CONFIG_MMC
diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h
index d690045..0685328 100644
--- a/include/configs/tegra-common.h
+++ b/include/configs/tegra-common.h
@@ -26,6 +26,7 @@
#endif
#define CONFIG_DM_SPI
#define CONFIG_DM_SPI_FLASH
+#define CONFIG_DM_I2C
#define CONFIG_SYS_TIMER_RATE 1000000
#define CONFIG_SYS_TIMER_COUNTER NV_PA_TMRUS_BASE
diff --git a/include/configs/tegra114-common.h b/include/configs/tegra114-common.h
index 555c237..9eba5d5 100644
--- a/include/configs/tegra114-common.h
+++ b/include/configs/tegra114-common.h
@@ -76,9 +76,6 @@
#define CONFIG_SYS_SPL_MALLOC_START 0x80090000
#define CONFIG_SPL_STACK 0x800ffffc
-/* Total I2C ports on Tegra114 */
-#define TEGRA_I2C_NUM_CONTROLLERS 5
-
/* For USB EHCI controller */
#define CONFIG_EHCI_IS_TDI
#define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10
diff --git a/include/configs/tegra124-common.h b/include/configs/tegra124-common.h
index 61e5026..f2b3774 100644
--- a/include/configs/tegra124-common.h
+++ b/include/configs/tegra124-common.h
@@ -68,9 +68,6 @@
#define CONFIG_SYS_SPL_MALLOC_START 0x80090000
#define CONFIG_SPL_STACK 0x800ffffc
-/* Total I2C ports on Tegra124 */
-#define TEGRA_I2C_NUM_CONTROLLERS 5
-
/* For USB EHCI controller */
#define CONFIG_EHCI_IS_TDI
#define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10
diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h
index 21bf977..6330281 100644
--- a/include/configs/tegra20-common.h
+++ b/include/configs/tegra20-common.h
@@ -97,9 +97,6 @@
#define CONFIG_EHCI_IS_TDI
#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1
-/* Total I2C ports on Tegra20 */
-#define TEGRA_I2C_NUM_CONTROLLERS 4
-
#define CONFIG_SYS_NAND_SELF_INIT
#define CONFIG_SYS_NAND_ONFI_DETECTION
diff --git a/include/configs/tegra30-common.h b/include/configs/tegra30-common.h
index 443c842..bfdbeb7 100644
--- a/include/configs/tegra30-common.h
+++ b/include/configs/tegra30-common.h
@@ -73,9 +73,6 @@
#define CONFIG_SYS_SPL_MALLOC_START 0x80090000
#define CONFIG_SPL_STACK 0x800ffffc
-/* Total I2C ports on Tegra30 */
-#define TEGRA_I2C_NUM_CONTROLLERS 5
-
/* For USB EHCI controller */
#define CONFIG_EHCI_IS_TDI
#define CONFIG_USB_EHCI_TXFIFO_THRESH 0x10
diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h
index 2fddef3..deb6bb2 100644
--- a/include/configs/ti814x_evm.h
+++ b/include/configs/ti814x_evm.h
@@ -178,7 +178,7 @@
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
-#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SPL_FAT_SUPPORT
diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h
index aeabb1b..87a4efc 100644
--- a/include/configs/ti816x_evm.h
+++ b/include/configs/ti816x_evm.h
@@ -144,7 +144,7 @@
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
-#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SPL_FAT_SUPPORT
diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h
index a8790c2..bc75172 100644
--- a/include/configs/ti_armv7_common.h
+++ b/include/configs/ti_armv7_common.h
@@ -233,7 +233,7 @@
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
/* FAT sd card locations. */
-#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
#ifdef CONFIG_SPL_OS_BOOT
diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h
index 3166392..c47651d 100644
--- a/include/configs/ti_omap5_common.h
+++ b/include/configs/ti_omap5_common.h
@@ -19,7 +19,6 @@
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
-#define CONFIG_MISC_INIT_R
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_SYS_CACHELINE_SIZE 64
@@ -79,7 +78,7 @@
"partitions=" PARTS_DEFAULT "\0" \
"optargs=\0" \
"mmcdev=0\0" \
- "mmcroot=/dev/mmcblk1p2 rw\0" \
+ "mmcroot=/dev/mmcblk0p2 rw\0" \
"mmcrootfstype=ext4 rootwait\0" \
"mmcargs=setenv bootargs console=${console} " \
"${optargs} " \
@@ -118,6 +117,8 @@
"setenv fdtfile dra7-evm.dtb; fi;" \
"if test $board_name = dra72x; then " \
"setenv fdtfile dra72-evm.dtb; fi;" \
+ "if test $board_name = beagle_x15; then " \
+ "setenv fdtfile am57xx-beagle-x15.dtb; fi;" \
"if test $fdtfile = undefined; then " \
"echo WARNING: Could not determine device tree to use; fi; \0" \
"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile};\0" \
diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h
index 6e7a7fb..36621a5 100644
--- a/include/configs/tricorder.h
+++ b/include/configs/tricorder.h
@@ -349,7 +349,7 @@
#define CONFIG_SPL_FAT_SUPPORT
#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
-#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
#define CONFIG_SPL_TEXT_BASE 0x40200000 /*CONFIG_SYS_SRAM_START*/
diff --git a/include/configs/trimslice.h b/include/configs/trimslice.h
index 7c00642..a254f86 100644
--- a/include/configs/trimslice.h
+++ b/include/configs/trimslice.h
@@ -34,10 +34,7 @@
/* I2C */
#define CONFIG_SYS_I2C_TEGRA
-#define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C
/* SD/MMC */
#define CONFIG_MMC
diff --git a/include/configs/uniphier-common.h b/include/configs/uniphier.h
index 2140fcc..dd022fb 100644
--- a/include/configs/uniphier-common.h
+++ b/include/configs/uniphier.h
@@ -10,10 +10,37 @@
#ifndef __CONFIG_UNIPHIER_COMMON_H__
#define __CONFIG_UNIPHIER_COMMON_H__
-#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) && \
- defined(CONFIG_DCC_MICRO_SUPPORT_CARD)
-# error "Both CONFIG_PFC_MICRO_SUPPORT_CARD and CONFIG_DCC_MICRO_SUPPORT_CARD \
-are defined. Select only one of them."
+#if defined(CONFIG_MACH_PH1_PRO4)
+#define CONFIG_DDR_NUM_CH0 2
+#define CONFIG_DDR_NUM_CH1 2
+
+/* Physical start address of SDRAM */
+#define CONFIG_SDRAM0_BASE 0x80000000
+#define CONFIG_SDRAM0_SIZE 0x20000000
+#define CONFIG_SDRAM1_BASE 0xa0000000
+#define CONFIG_SDRAM1_SIZE 0x20000000
+#endif
+
+#if defined(CONFIG_MACH_PH1_LD4)
+#define CONFIG_DDR_NUM_CH0 1
+#define CONFIG_DDR_NUM_CH1 1
+
+/* Physical start address of SDRAM */
+#define CONFIG_SDRAM0_BASE 0x80000000
+#define CONFIG_SDRAM0_SIZE 0x10000000
+#define CONFIG_SDRAM1_BASE 0x90000000
+#define CONFIG_SDRAM1_SIZE 0x10000000
+#endif
+
+#if defined(CONFIG_MACH_PH1_SLD8)
+#define CONFIG_DDR_NUM_CH0 1
+#define CONFIG_DDR_NUM_CH1 1
+
+/* Physical start address of SDRAM */
+#define CONFIG_SDRAM0_BASE 0x80000000
+#define CONFIG_SDRAM0_SIZE 0x10000000
+#define CONFIG_SDRAM1_BASE 0x90000000
+#define CONFIG_SDRAM1_SIZE 0x10000000
#endif
/*
@@ -40,6 +67,13 @@ are defined. Select only one of them."
#define CONFIG_SYS_NS16550_REG_SIZE -2
#endif
+/* TODO: move to Kconfig and device tree */
+#if 0
+#define CONFIG_SYS_NS16550_SERIAL
+#endif
+
+#define CONFIG_SMC911X
+
#define CONFIG_SMC911X_BASE CONFIG_SUPPORT_CARD_ETHER_BASE
#define CONFIG_SMC911X_32_BIT
@@ -58,6 +92,7 @@ are defined. Select only one of them."
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_BOARD_EARLY_INIT_R
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
@@ -87,17 +122,7 @@ are defined. Select only one of them."
#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
-#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD)
-# define CONFIG_SYS_MAX_FLASH_BANKS 1
-# define CONFIG_SYS_FLASH_BANKS_LIST {0x00000000}
-# define CONFIG_SYS_FLASH_BANKS_SIZES {0x02000000}
-#endif
-
-#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD)
-# define CONFIG_SYS_MAX_FLASH_BANKS 1
-# define CONFIG_SYS_FLASH_BANKS_LIST {0x04000000}
-# define CONFIG_SYS_FLASH_BANKS_SIZES {0x04000000}
-#endif
+#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 2
/* serial console configuration */
#define CONFIG_BAUDRATE 115200
@@ -205,7 +230,6 @@ are defined. Select only one of them."
"image_offset=0x00080000\0" \
"image_size=0x00f00000\0" \
"verify=n\0" \
- "autostart=yes\0" \
"norboot=run add_default_bootargs;" \
"bootm $image_offset\0" \
"nandboot=run add_default_bootargs;" \
@@ -233,6 +257,13 @@ are defined. Select only one of them."
#define CONFIG_SYS_TEXT_BASE 0x84000000
+#if defined(CONFIG_MACH_PH1_LD4) || defined(CONFIG_MACH_PH1_SLD8)
+#define CONFIG_SPL_TEXT_BASE 0x00040000
+#endif
+#if defined(CONFIG_MACH_PH1_PRO4)
+#define CONFIG_SPL_TEXT_BASE 0x00100000
+#endif
+
#define CONFIG_BOARD_POSTCLK_INIT
#ifndef CONFIG_SPL_BUILD
diff --git a/include/configs/venice2.h b/include/configs/venice2.h
index 6897aa8..8880de8 100644
--- a/include/configs/venice2.h
+++ b/include/configs/venice2.h
@@ -25,12 +25,7 @@
/* I2C */
#define CONFIG_SYS_I2C_TEGRA
-#define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_MAX_I2C_BUS TEGRA_I2C_NUM_CONTROLLERS
-#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C
/* SD/MMC */
#define CONFIG_MMC
diff --git a/include/configs/whistler.h b/include/configs/whistler.h
index 10e70d2..e083cbd 100644
--- a/include/configs/whistler.h
+++ b/include/configs/whistler.h
@@ -26,10 +26,7 @@
/* I2C */
#define CONFIG_SYS_I2C_TEGRA
-#define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C
/* SD/MMC */
#define CONFIG_MMC
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index c39c568..87b4fff 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -265,7 +265,7 @@
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
-#define CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION 1
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#define CONFIG_SPL_LIBDISK_SUPPORT
#define CONFIG_SPL_FAT_SUPPORT
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot-dtb.img"
diff --git a/include/cortina.h b/include/cortina.h
new file mode 100644
index 0000000..6cadd28
--- /dev/null
+++ b/include/cortina.h
@@ -0,0 +1,75 @@
+/*
+ * Cortina PHY drivers
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Copyright 2014 Freescale Semiconductor, Inc.
+ */
+
+#ifndef _CORTINA_H_
+#define _CORTINA_H_
+
+#define VILLA_GLOBAL_CHIP_ID_LSB 0x000
+#define VILLA_GLOBAL_CHIP_ID_MSB 0x001
+#define VILLA_GLOBAL_BIST_CONTROL 0x002
+#define VILLA_GLOBAL_BIST_STATUS 0x003
+#define VILLA_GLOBAL_LINE_SOFT_RESET 0x007
+#define VILLA_GLOBAL_HOST_SOFT_RESET 0x008
+#define VILLA_GLOBAL_DWNLD_CHECKSUM_CTRL 0x00A
+#define VILLA_GLOBAL_DWNLD_CHECKSUM_STATUS 0x00B
+#define VILLA_GLOBAL_MSEQCLKCTRL 0x00E
+#define VILLA_MSEQ_OPTIONS 0x1D0
+#define VILLA_MSEQ_PC 0x1D3
+#define VILLA_MSEQ_BANKSELECT 0x1DF
+#define VILLA_DSP_SDS_DSP_COEF_DFE0_SELECT 0x2DB
+#define VILLA_DSP_SDS_SERDES_SRX_DFE0_SELECT 0x36E
+#define VILLA_LINE_SDS_COMMON_SRX0_RX_LOOP_FILTER 0x403
+#define VILLA_LINE_SDS_COMMON_SRX0_RX_CPA 0x404
+#define VILLA_LINE_SDS_COMMON_SRX0_RX_CPB 0x405
+#define VILLA_DSP_SDS_SERDES_SRX_FFE_DELAY_CTRL 0x369
+#define VILLA_MSEQ_ENABLE_MSB 0x194
+#define VILLA_MSEQ_SPARE21_LSB 0x226
+#define VILLA_MSEQ_RESET_COUNT_LSB 0x1E0
+#define VILLA_MSEQ_SPARE12_MSB 0x215
+#define VILLA_MSEQ_SPARE2_LSB 0x200
+#define VILLA_MSEQ_SPARE7_LSB 0x20A
+#define VILLA_MSEQ_SPARE9_LSB 0x20E
+#define VILLA_MSEQ_SPARE3_LSB 0x202
+#define VILLA_MSEQ_SPARE3_MSB 0x203
+#define VILLA_MSEQ_SPARE8_LSB 0x20C
+#define VILLA_MSEQ_SPARE8_MSB 0x20D
+#define VILLA_MSEQ_COEF8_FFE0_LSB 0x1E2
+#define VILLA_MSEQ_COEF8_FFE1_LSB 0x1E4
+#define VILLA_MSEQ_COEF8_FFE2_LSB 0x1E6
+#define VILLA_MSEQ_COEF8_FFE3_LSB 0x1E8
+#define VILLA_MSEQ_COEF8_FFE4_LSB 0x1EA
+#define VILLA_MSEQ_COEF8_FFE5_LSB 0x1EC
+#define VILLA_MSEQ_COEF8_DFE0_LSB 0x1F0
+#define VILLA_MSEQ_COEF8_DFE0N_LSB 0x1EE
+#define VILLA_MSEQ_COEF8_DFE1_LSB 0x1F2
+#define VILLA_DSP_SDS_DSP_COEF_LARGE_LEAK 0x2E2
+#define VILLA_DSP_SDS_SERDES_SRX_DAC_ENABLEB_LSB 0x360
+#define VILLA_MSEQ_POWER_DOWN_LSB 0x198
+#define VILLA_MSEQ_POWER_DOWN_MSB 0x199
+#define VILLA_MSEQ_CAL_RX_SLICER 0x1B8
+#define VILLA_DSP_SDS_SERDES_SRX_DAC_BIAS_SELECT1_MSB 0x365
+#define VILLA_MSEQ_COEF_INIT_SEL 0x1AE
+#define VILLA_DSP_SDS_DSP_PRECODEDINITFFE21 0x26A
+#define VILLA_MSEQ_SERDES_PARAM_LSB 0x195
+#define VILLA_MSEQ_SPARE25_LSB 0x22E
+#define VILLA_MSEQ_SPARE23_LSB 0x22A
+#define VILLA_MSEQ_CAL_RX_DFE_EQ 0x1BA
+#define VILLA_GLOBAL_VILLA2_COMPATIBLE 0x030
+#define VILLA_HOST_SDS_COMMON_STX0_TX_OUTPUT_CTRLA 0x812
+#define VILLA_HOST_SDS_COMMON_STX0_TX_OUTPUT_CTRLB 0x813
+#define VILLA_LINE_SDS_COMMON_STX0_TX_OUTPUT_CTRLA 0x427
+#define VILLA_LINE_SDS_COMMON_STX0_TX_OUTPUT_CTRLB 0x428
+
+#define mseq_edc_bist_done (0x1<<0)
+#define mseq_edc_bist_fail (0x1<<8)
+
+struct cortina_reg_config {
+ unsigned short reg_addr;
+ unsigned short reg_value;
+};
+#endif
diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h
index 202f59b..f17c3c2 100644
--- a/include/dm/uclass-id.h
+++ b/include/dm/uclass-id.h
@@ -19,6 +19,7 @@ enum uclass_id {
UCLASS_TEST_FDT,
UCLASS_TEST_BUS,
UCLASS_SPI_EMUL, /* sandbox SPI device emulator */
+ UCLASS_I2C_EMUL, /* sandbox I2C device emulator */
UCLASS_SIMPLE_BUS,
/* U-Boot uclasses start here */
@@ -29,6 +30,9 @@ enum uclass_id {
UCLASS_SPI_FLASH, /* SPI flash */
UCLASS_CROS_EC, /* Chrome OS EC */
UCLASS_THERMAL, /* Thermal sensor */
+ UCLASS_I2C, /* I2C bus */
+ UCLASS_I2C_GENERIC, /* Generic I2C device */
+ UCLASS_I2C_EEPROM, /* I2C EEPROM device */
UCLASS_COUNT,
UCLASS_INVALID = -1,
diff --git a/include/dm/ut.h b/include/dm/ut.h
index fa9eac0..ec61465 100644
--- a/include/dm/ut.h
+++ b/include/dm/ut.h
@@ -89,6 +89,18 @@ void ut_failf(struct dm_test_state *dms, const char *fname, int line,
} \
}
+/* Assert that a pointer is not NULL */
+#define ut_assertnonnull(expr) { \
+ const void *val = (expr); \
+ \
+ if (val == NULL) { \
+ ut_failf(dms, __FILE__, __LINE__, __func__, \
+ #expr " = NULL", \
+ "Expected non-null, got NULL"); \
+ return -1; \
+ } \
+}
+
/* Assert that an operation succeeds (returns 0) */
#define ut_assertok(cond) ut_asserteq(0, cond)
diff --git a/include/dt-bindings/pinctrl/pinctrl-tegra.h b/include/dt-bindings/pinctrl/pinctrl-tegra.h
new file mode 100644
index 0000000..ebafa49
--- /dev/null
+++ b/include/dt-bindings/pinctrl/pinctrl-tegra.h
@@ -0,0 +1,45 @@
+/*
+ * This header provides constants for Tegra pinctrl bindings.
+ *
+ * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * Author: Laxman Dewangan <ldewangan@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_TEGRA_H
+#define _DT_BINDINGS_PINCTRL_TEGRA_H
+
+/*
+ * Enable/disable for diffeent dt properties. This is applicable for
+ * properties nvidia,enable-input, nvidia,tristate, nvidia,open-drain,
+ * nvidia,lock, nvidia,rcv-sel, nvidia,high-speed-mode, nvidia,schmitt.
+ */
+#define TEGRA_PIN_DISABLE 0
+#define TEGRA_PIN_ENABLE 1
+
+#define TEGRA_PIN_PULL_NONE 0
+#define TEGRA_PIN_PULL_DOWN 1
+#define TEGRA_PIN_PULL_UP 2
+
+/* Low power mode driver */
+#define TEGRA_PIN_LP_DRIVE_DIV_8 0
+#define TEGRA_PIN_LP_DRIVE_DIV_4 1
+#define TEGRA_PIN_LP_DRIVE_DIV_2 2
+#define TEGRA_PIN_LP_DRIVE_DIV_1 3
+
+/* Rising/Falling slew rate */
+#define TEGRA_PIN_SLEW_RATE_FASTEST 0
+#define TEGRA_PIN_SLEW_RATE_FAST 1
+#define TEGRA_PIN_SLEW_RATE_SLOW 2
+#define TEGRA_PIN_SLEW_RATE_SLOWEST 3
+
+#endif
diff --git a/include/errno.h b/include/errno.h
index e24a33b..14ac3cb 100644
--- a/include/errno.h
+++ b/include/errno.h
@@ -6,4 +6,7 @@ extern int errno;
#define __set_errno(val) do { errno = val; } while (0)
+#ifdef CONFIG_ERRNO_STR
+const char *errno_str(int errno);
+#endif
#endif /* _ERRNO_H */
diff --git a/include/fm_eth.h b/include/fm_eth.h
index e46a684..3e1b9f4 100644
--- a/include/fm_eth.h
+++ b/include/fm_eth.h
@@ -75,6 +75,20 @@ enum fm_eth_type {
offsetof(struct ccsr_fman, memac[n-1]),\
}
+#ifdef CONFIG_FSL_FM_10GEC_REGULAR_NOTATION
+#define FM_TGEC_INFO_INITIALIZER(idx, n) \
+{ \
+ FM_ETH_INFO_INITIALIZER(idx, CONFIG_SYS_FM1_TGEC_MDIO_ADDR) \
+ .index = idx, \
+ .num = n - 1, \
+ .type = FM_ETH_10G_E, \
+ .port = FM##idx##_10GEC##n, \
+ .rx_port_id = RX_PORT_10G_BASE2 + n - 1, \
+ .tx_port_id = TX_PORT_10G_BASE2 + n - 1, \
+ .compat_offset = CONFIG_SYS_FSL_FM##idx##_OFFSET + \
+ offsetof(struct ccsr_fman, memac[n-1]),\
+}
+#else
#define FM_TGEC_INFO_INITIALIZER(idx, n) \
{ \
FM_ETH_INFO_INITIALIZER(idx, CONFIG_SYS_FM2_TGEC_MDIO_ADDR) \
@@ -87,6 +101,7 @@ enum fm_eth_type {
.compat_offset = CONFIG_SYS_FSL_FM##idx##_OFFSET + \
offsetof(struct ccsr_fman, memac[n-1+8]),\
}
+#endif
#if (CONFIG_SYS_NUM_FM1_10GEC >= 3)
#define FM_TGEC_INFO_INITIALIZER2(idx, n) \
diff --git a/include/fsl_ddr_sdram.h b/include/fsl_ddr_sdram.h
index 5b03c14..095b33e 100644
--- a/include/fsl_ddr_sdram.h
+++ b/include/fsl_ddr_sdram.h
@@ -114,6 +114,7 @@ typedef struct ddr4_spd_eeprom_s generic_spd_eeprom_t;
#define SDRAM_CFG_2T_EN 0x00008000
#define SDRAM_CFG_BI 0x00000001
+#define SDRAM_CFG2_FRC_SR 0x80000000
#define SDRAM_CFG2_D_INIT 0x00000010
#define SDRAM_CFG2_ODT_CFG_MASK 0x00600000
#define SDRAM_CFG2_ODT_NEVER 0
@@ -163,6 +164,7 @@ typedef struct ddr4_spd_eeprom_s generic_spd_eeprom_t;
#define DDR_CDR1_ODT(x) ((x & DDR_CDR1_ODT_MASK) << DDR_CDR1_ODT_SHIFT)
#define DDR_CDR2_ODT(x) (x & DDR_CDR2_ODT_MASK)
#define DDR_CDR2_VREF_OVRD(x) (0x00008080 | ((((x) - 37) & 0x3F) << 8))
+#define DDR_CDR2_VREF_TRAIN_EN 0x00000080
#if (defined(CONFIG_SYS_FSL_DDR_VER) && \
(CONFIG_SYS_FSL_DDR_VER >= FSL_DDR_VER_4_7))
@@ -202,6 +204,8 @@ typedef struct ddr4_spd_eeprom_s generic_spd_eeprom_t;
#define DDR_CDR_ODT_120ohm 0x6
#endif
+#define DDR_INIT_ADDR_EXT_UIA (1 << 31)
+
/* Record of register values computed */
typedef struct fsl_ddr_cfg_regs_s {
struct {
@@ -414,9 +418,11 @@ static int __board_need_mem_reset(void)
int board_need_mem_reset(void)
__attribute__((weak, alias("__board_need_mem_reset")));
-void __weak board_mem_sleep_setup(void)
-{
-}
+#if defined(CONFIG_DEEP_SLEEP)
+void board_mem_sleep_setup(void);
+bool is_warm_boot(void);
+int fsl_dp_resume(void);
+#endif
/*
* The 85xx boards have a common prototype for fixed_sdram so put the
diff --git a/include/fsl_usb.h b/include/fsl_usb.h
index e4902aa..d251f5d 100644
--- a/include/fsl_usb.h
+++ b/include/fsl_usb.h
@@ -145,6 +145,25 @@ static inline bool has_erratum_a007798(void)
return SVR_SOC_VER(get_svr()) == SVR_T4240 &&
IS_SVR_REV(get_svr(), 2, 0);
}
+
+static inline bool has_erratum_a007792(void)
+{
+ u32 svr = get_svr();
+ u32 soc = SVR_SOC_VER(svr);
+
+ switch (soc) {
+ case SVR_T4240:
+ case SVR_T4160:
+ return IS_SVR_REV(svr, 2, 0);
+ case SVR_T1040:
+ return IS_SVR_REV(svr, 1, 0);
+ case SVR_T2080:
+ case SVR_T2081:
+ return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 1, 1);
+ }
+ return false;
+}
+
#else
static inline bool has_erratum_a006261(void)
{
@@ -161,5 +180,9 @@ static inline bool has_erratum_a007798(void)
return false;
}
+static inline bool has_erratum_a007792(void)
+{
+ return false;
+}
#endif
#endif /*_ASM_FSL_USB_H_ */
diff --git a/include/i2c.h b/include/i2c.h
index 1b4078e..9c6a60c 100644
--- a/include/i2c.h
+++ b/include/i2c.h
@@ -18,6 +18,355 @@
#define _I2C_H_
/*
+ * For now there are essentially two parts to this file - driver model
+ * here at the top, and the older code below (with CONFIG_SYS_I2C being
+ * most recent). The plan is to migrate everything to driver model.
+ * The driver model structures and API are separate as they are different
+ * enough as to be incompatible for compilation purposes.
+ */
+
+#ifdef CONFIG_DM_I2C
+
+enum dm_i2c_chip_flags {
+ DM_I2C_CHIP_10BIT = 1 << 0, /* Use 10-bit addressing */
+ DM_I2C_CHIP_RD_ADDRESS = 1 << 1, /* Send address for each read byte */
+ DM_I2C_CHIP_WR_ADDRESS = 1 << 2, /* Send address for each write byte */
+};
+
+/**
+ * struct dm_i2c_chip - information about an i2c chip
+ *
+ * An I2C chip is a device on the I2C bus. It sits at a particular address
+ * and normally supports 7-bit or 10-bit addressing.
+ *
+ * To obtain this structure, use dev_get_parentdata(dev) where dev is the
+ * chip to examine.
+ *
+ * @chip_addr: Chip address on bus
+ * @offset_len: Length of offset in bytes. A single byte offset can
+ * represent up to 256 bytes. A value larger than 1 may be
+ * needed for larger devices.
+ * @flags: Flags for this chip (dm_i2c_chip_flags)
+ * @emul: Emulator for this chip address (only used for emulation)
+ */
+struct dm_i2c_chip {
+ uint chip_addr;
+ uint offset_len;
+ uint flags;
+#ifdef CONFIG_SANDBOX
+ struct udevice *emul;
+#endif
+};
+
+/**
+ * struct dm_i2c_bus- information about an i2c bus
+ *
+ * An I2C bus contains 0 or more chips on it, each at its own address. The
+ * bus can operate at different speeds (measured in Hz, typically 100KHz
+ * or 400KHz).
+ *
+ * To obtain this structure, use bus->uclass_priv where bus is the I2C
+ * bus udevice.
+ *
+ * @speed_hz: Bus speed in hertz (typically 100000)
+ */
+struct dm_i2c_bus {
+ int speed_hz;
+};
+
+/**
+ * i2c_read() - read bytes from an I2C chip
+ *
+ * To obtain an I2C device (called a 'chip') given the I2C bus address you
+ * can use i2c_get_chip(). To obtain a bus by bus number use
+ * uclass_get_device_by_seq(UCLASS_I2C, <bus number>).
+ *
+ * To set the address length of a devce use i2c_set_addr_len(). It
+ * defaults to 1.
+ *
+ * @dev: Chip to read from
+ * @offset: Offset within chip to start reading
+ * @buffer: Place to put data
+ * @len: Number of bytes to read
+ *
+ * @return 0 on success, -ve on failure
+ */
+int i2c_read(struct udevice *dev, uint offset, uint8_t *buffer,
+ int len);
+
+/**
+ * i2c_write() - write bytes to an I2C chip
+ *
+ * See notes for i2c_read() above.
+ *
+ * @dev: Chip to write to
+ * @offset: Offset within chip to start writing
+ * @buffer: Buffer containing data to write
+ * @len: Number of bytes to write
+ *
+ * @return 0 on success, -ve on failure
+ */
+int i2c_write(struct udevice *dev, uint offset, const uint8_t *buffer,
+ int len);
+
+/**
+ * i2c_probe() - probe a particular chip address
+ *
+ * This can be useful to check for the existence of a chip on the bus.
+ * It is typically implemented by writing the chip address to the bus
+ * and checking that the chip replies with an ACK.
+ *
+ * @bus: Bus to probe
+ * @chip_addr: 7-bit address to probe (10-bit and others are not supported)
+ * @chip_flags: Flags for the probe (see enum dm_i2c_chip_flags)
+ * @devp: Returns the device found, or NULL if none
+ * @return 0 if a chip was found at that address, -ve if not
+ */
+int i2c_probe(struct udevice *bus, uint chip_addr, uint chip_flags,
+ struct udevice **devp);
+
+/**
+ * i2c_set_bus_speed() - set the speed of a bus
+ *
+ * @bus: Bus to adjust
+ * @speed: Requested speed in Hz
+ * @return 0 if OK, -EINVAL for invalid values
+ */
+int i2c_set_bus_speed(struct udevice *bus, unsigned int speed);
+
+/**
+ * i2c_get_bus_speed() - get the speed of a bus
+ *
+ * @bus: Bus to check
+ * @return speed of selected I2C bus in Hz, -ve on error
+ */
+int i2c_get_bus_speed(struct udevice *bus);
+
+/**
+ * i2c_set_chip_flags() - set flags for a chip
+ *
+ * Typically addresses are 7 bits, but for 10-bit addresses you should set
+ * flags to DM_I2C_CHIP_10BIT. All accesses will then use 10-bit addressing.
+ *
+ * @dev: Chip to adjust
+ * @flags: New flags
+ * @return 0 if OK, -EINVAL if value is unsupported, other -ve value on error
+ */
+int i2c_set_chip_flags(struct udevice *dev, uint flags);
+
+/**
+ * i2c_get_chip_flags() - get flags for a chip
+ *
+ * @dev: Chip to check
+ * @flagsp: Place to put flags
+ * @return 0 if OK, other -ve value on error
+ */
+int i2c_get_chip_flags(struct udevice *dev, uint *flagsp);
+
+/**
+ * i2c_set_offset_len() - set the offset length for a chip
+ *
+ * The offset used to access a chip may be up to 4 bytes long. Typically it
+ * is only 1 byte, which is enough for chips with 256 bytes of memory or
+ * registers. The default value is 1, but you can call this function to
+ * change it.
+ *
+ * @offset_len: New offset length value (typically 1 or 2)
+ */
+
+int i2c_set_chip_offset_len(struct udevice *dev, uint offset_len);
+/**
+ * i2c_deblock() - recover a bus that is in an unknown state
+ *
+ * See the deblock() method in 'struct dm_i2c_ops' for full information
+ *
+ * @bus: Bus to recover
+ * @return 0 if OK, -ve on error
+ */
+int i2c_deblock(struct udevice *bus);
+
+/*
+ * Not all of these flags are implemented in the U-Boot API
+ */
+enum dm_i2c_msg_flags {
+ I2C_M_TEN = 0x0010, /* ten-bit chip address */
+ I2C_M_RD = 0x0001, /* read data, from slave to master */
+ I2C_M_STOP = 0x8000, /* send stop after this message */
+ I2C_M_NOSTART = 0x4000, /* no start before this message */
+ I2C_M_REV_DIR_ADDR = 0x2000, /* invert polarity of R/W bit */
+ I2C_M_IGNORE_NAK = 0x1000, /* continue after NAK */
+ I2C_M_NO_RD_ACK = 0x0800, /* skip the Ack bit on reads */
+ I2C_M_RECV_LEN = 0x0400, /* length is first received byte */
+};
+
+/**
+ * struct i2c_msg - an I2C message
+ *
+ * @addr: Slave address
+ * @flags: Flags (see enum dm_i2c_msg_flags)
+ * @len: Length of buffer in bytes, may be 0 for a probe
+ * @buf: Buffer to send/receive, or NULL if no data
+ */
+struct i2c_msg {
+ uint addr;
+ uint flags;
+ uint len;
+ u8 *buf;
+};
+
+/**
+ * struct i2c_msg_list - a list of I2C messages
+ *
+ * This is called i2c_rdwr_ioctl_data in Linux but the name does not seem
+ * appropriate in U-Boot.
+ *
+ * @msg: Pointer to i2c_msg array
+ * @nmsgs: Number of elements in the array
+ */
+struct i2c_msg_list {
+ struct i2c_msg *msgs;
+ uint nmsgs;
+};
+
+/**
+ * struct dm_i2c_ops - driver operations for I2C uclass
+ *
+ * Drivers should support these operations unless otherwise noted. These
+ * operations are intended to be used by uclass code, not directly from
+ * other code.
+ */
+struct dm_i2c_ops {
+ /**
+ * xfer() - transfer a list of I2C messages
+ *
+ * @bus: Bus to read from
+ * @msg: List of messages to transfer
+ * @nmsgs: Number of messages in the list
+ * @return 0 if OK, -EREMOTEIO if the slave did not ACK a byte,
+ * -ECOMM if the speed cannot be supported, -EPROTO if the chip
+ * flags cannot be supported, other -ve value on some other error
+ */
+ int (*xfer)(struct udevice *bus, struct i2c_msg *msg, int nmsgs);
+
+ /**
+ * probe_chip() - probe for the presense of a chip address
+ *
+ * This function is optional. If omitted, the uclass will send a zero
+ * length message instead.
+ *
+ * @bus: Bus to probe
+ * @chip_addr: Chip address to probe
+ * @chip_flags: Probe flags (enum dm_i2c_chip_flags)
+ * @return 0 if chip was found, -EREMOTEIO if not, -ENOSYS to fall back
+ * to default probem other -ve value on error
+ */
+ int (*probe_chip)(struct udevice *bus, uint chip_addr, uint chip_flags);
+
+ /**
+ * set_bus_speed() - set the speed of a bus (optional)
+ *
+ * The bus speed value will be updated by the uclass if this function
+ * does not return an error. This method is optional - if it is not
+ * provided then the driver can read the speed from
+ * bus->uclass_priv->speed_hz
+ *
+ * @bus: Bus to adjust
+ * @speed: Requested speed in Hz
+ * @return 0 if OK, -EINVAL for invalid values
+ */
+ int (*set_bus_speed)(struct udevice *bus, unsigned int speed);
+
+ /**
+ * get_bus_speed() - get the speed of a bus (optional)
+ *
+ * Normally this can be provided by the uclass, but if you want your
+ * driver to check the bus speed by looking at the hardware, you can
+ * implement that here. This method is optional. This method would
+ * normally be expected to return bus->uclass_priv->speed_hz.
+ *
+ * @bus: Bus to check
+ * @return speed of selected I2C bus in Hz, -ve on error
+ */
+ int (*get_bus_speed)(struct udevice *bus);
+
+ /**
+ * set_flags() - set the flags for a chip (optional)
+ *
+ * This is generally implemented by the uclass, but drivers can
+ * check the value to ensure that unsupported options are not used.
+ * This method is optional. If provided, this method will always be
+ * called when the flags change.
+ *
+ * @dev: Chip to adjust
+ * @flags: New flags value
+ * @return 0 if OK, -EINVAL if value is unsupported
+ */
+ int (*set_flags)(struct udevice *dev, uint flags);
+
+ /**
+ * deblock() - recover a bus that is in an unknown state
+ *
+ * I2C is a synchronous protocol and resets of the processor in the
+ * middle of an access can block the I2C Bus until a powerdown of
+ * the full unit is done. This is because slaves can be stuck
+ * waiting for addition bus transitions for a transaction that will
+ * never complete. Resetting the I2C master does not help. The only
+ * way is to force the bus through a series of transitions to make
+ * sure that all slaves are done with the transaction. This method
+ * performs this 'deblocking' if support by the driver.
+ *
+ * This method is optional.
+ */
+ int (*deblock)(struct udevice *bus);
+};
+
+#define i2c_get_ops(dev) ((struct dm_i2c_ops *)(dev)->driver->ops)
+
+/**
+ * i2c_get_chip() - get a device to use to access a chip on a bus
+ *
+ * This returns the device for the given chip address. The device can then
+ * be used with calls to i2c_read(), i2c_write(), i2c_probe(), etc.
+ *
+ * @bus: Bus to examine
+ * @chip_addr: Chip address for the new device
+ * @devp: Returns pointer to new device if found or -ENODEV if not
+ * found
+ */
+int i2c_get_chip(struct udevice *bus, uint chip_addr, struct udevice **devp);
+
+/**
+ * i2c_get_chip() - get a device to use to access a chip on a bus number
+ *
+ * This returns the device for the given chip address on a particular bus
+ * number.
+ *
+ * @busnum: Bus number to examine
+ * @chip_addr: Chip address for the new device
+ * @devp: Returns pointer to new device if found or -ENODEV if not
+ * found
+ */
+int i2c_get_chip_for_busnum(int busnum, int chip_addr, struct udevice **devp);
+
+/**
+ * i2c_chip_ofdata_to_platdata() - Decode standard I2C platform data
+ *
+ * This decodes the chip address from a device tree node and puts it into
+ * its dm_i2c_chip structure. This should be called in your driver's
+ * ofdata_to_platdata() method.
+ *
+ * @blob: Device tree blob
+ * @node: Node offset to read from
+ * @spi: Place to put the decoded information
+ */
+int i2c_chip_ofdata_to_platdata(const void *blob, int node,
+ struct dm_i2c_chip *chip);
+
+#endif
+
+#ifndef CONFIG_DM_I2C
+
+/*
* WARNING WARNING WARNING WARNING WARNING WARNING WARNING WARNING
*
* The implementation MUST NOT use static or global variables if the
@@ -451,4 +800,7 @@ int i2c_get_bus_num_fdt(int node);
* @return 0 if port was reset, -1 if not found
*/
int i2c_reset_port_fdt(const void *blob, int node);
+
+#endif /* !CONFIG_DM_I2C */
+
#endif /* _I2C_H_ */
diff --git a/include/i2c_eeprom.h b/include/i2c_eeprom.h
new file mode 100644
index 0000000..ea6c962
--- /dev/null
+++ b/include/i2c_eeprom.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (c) 2014 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __I2C_EEPROM
+#define __I2C_EEPROM
+
+struct i2c_eeprom_ops {
+ int (*read)(struct udevice *dev, int offset, uint8_t *buf, int size);
+ int (*write)(struct udevice *dev, int offset, const uint8_t *buf,
+ int size);
+};
+
+struct i2c_eeprom {
+};
+
+#endif
diff --git a/include/linux/compat.h b/include/linux/compat.h
index 47b0889..b40133c 100644
--- a/include/linux/compat.h
+++ b/include/linux/compat.h
@@ -215,13 +215,11 @@ typedef int wait_queue_head_t;
#define cond_resched() do { } while (0)
#define yield() do { } while (0)
-#define __user
#define __init
#define __exit
#define __devinit
#define __devinitdata
#define __devinitconst
-#define __iomem
#define kthread_create(...) __builtin_return_address(0)
#define kthread_stop(...) do { } while (0)
@@ -252,8 +250,6 @@ struct cdev {
#define cdev_add(...) 0
#define cdev_del(...) do { } while (0)
-#define MAX_ERRNO 4095
-
#define prandom_u32(...) 0
typedef struct {
diff --git a/include/linux/linkage.h b/include/linux/linkage.h
index 7435fcd..5797498 100644
--- a/include/linux/linkage.h
+++ b/include/linux/linkage.h
@@ -17,7 +17,9 @@
#define CPP_ASMLINKAGE
#endif
+#ifndef asmlinkage
#define asmlinkage CPP_ASMLINKAGE
+#endif
#define SYMBOL_NAME_STR(X) #X
#define SYMBOL_NAME(X) X
diff --git a/include/linux/string.h b/include/linux/string.h
index 96348d6..c7047ba 100644
--- a/include/linux/string.h
+++ b/include/linux/string.h
@@ -30,6 +30,9 @@ extern char * strcpy(char *,const char *);
#ifndef __HAVE_ARCH_STRNCPY
extern char * strncpy(char *,const char *, __kernel_size_t);
#endif
+#ifndef __HAVE_ARCH_STRLCPY
+size_t strlcpy(char *, const char *, size_t);
+#endif
#ifndef __HAVE_ARCH_STRCAT
extern char * strcat(char *, const char *);
#endif
diff --git a/include/linux/usb/xhci-omap.h b/include/linux/usb/xhci-omap.h
index 82630ad..cb166e6 100644
--- a/include/linux/usb/xhci-omap.h
+++ b/include/linux/usb/xhci-omap.h
@@ -14,6 +14,10 @@
#define OMAP_XHCI_BASE 0x488d0000
#define OMAP_OCP1_SCP_BASE 0x4A081000
#define OMAP_OTG_WRAPPER_BASE 0x488c0000
+#elif defined CONFIG_AM57XX
+#define OMAP_XHCI_BASE 0x48890000
+#define OMAP_OCP1_SCP_BASE 0x4A084c00
+#define OMAP_OTG_WRAPPER_BASE 0x48880000
#elif defined CONFIG_AM43XX
#define OMAP_XHCI_BASE 0x483d0000
#define OMAP_OCP1_SCP_BASE 0x483E8000
diff --git a/include/mmc.h b/include/mmc.h
index d74a190..7ec255d 100644
--- a/include/mmc.h
+++ b/include/mmc.h
@@ -31,6 +31,7 @@
#define MMC_VERSION_4_3 (MMC_VERSION_MMC | 0x403)
#define MMC_VERSION_4_41 (MMC_VERSION_MMC | 0x429)
#define MMC_VERSION_4_5 (MMC_VERSION_MMC | 0x405)
+#define MMC_VERSION_5_0 (MMC_VERSION_MMC | 0x500)
#define MMC_MODE_HS (1 << 0)
#define MMC_MODE_HS_52MHz (1 << 1)
@@ -147,6 +148,7 @@
* EXT_CSD fields
*/
#define EXT_CSD_GP_SIZE_MULT 143 /* R/W */
+#define EXT_CSD_PARTITION_SETTING 155 /* R/W */
#define EXT_CSD_PARTITIONS_ATTRIBUTE 156 /* R/W */
#define EXT_CSD_PARTITIONING_SUPPORT 160 /* RO */
#define EXT_CSD_RST_N_FUNCTION 162 /* R/W */
@@ -197,6 +199,8 @@
#define EXT_CSD_BOOT_BUS_WIDTH_RESET(x) (x << 2)
#define EXT_CSD_BOOT_BUS_WIDTH_WIDTH(x) (x)
+#define EXT_CSD_PARTITION_SETTING_COMPLETED (1 << 0)
+
#define R1_ILLEGAL_COMMAND (1 << 22)
#define R1_APP_CMD (1 << 5)
@@ -314,6 +318,7 @@ struct mmc {
char init_in_progress; /* 1 if we have done mmc_start_init() */
char preinit; /* start init as early as possible */
uint op_cond_response; /* the response byte from the last op_cond */
+ int ddr_mode;
};
int mmc_register(struct mmc *mmc);
@@ -385,6 +390,7 @@ struct mmc *mmc_spi_init(uint bus, uint cs, uint speed, uint mode);
int mmc_legacy_init(int verbose);
#endif
+void board_mmc_power_init(void);
int board_mmc_init(bd_t *bis);
int cpu_mmc_init(bd_t *bis);
int mmc_get_env_addr(struct mmc *mmc, int copy, u32 *env_addr);
diff --git a/include/pci_ids.h b/include/pci_ids.h
index ee98bee..26f4748 100644
--- a/include/pci_ids.h
+++ b/include/pci_ids.h
@@ -2998,6 +2998,14 @@
#define PCI_DEVICE_ID_INTEL_82454NX 0x84cb
#define PCI_DEVICE_ID_INTEL_84460GX 0x84ea
#define PCI_DEVICE_ID_INTEL_IXP4XX 0x8500
+#define PCI_DEVICE_ID_INTEL_TCF_GBE 0x8802
+#define PCI_DEVICE_ID_INTEL_TCF_SDIO_0 0x8809
+#define PCI_DEVICE_ID_INTEL_TCF_SDIO_1 0x880a
+#define PCI_DEVICE_ID_INTEL_TCF_SATA 0x880b
+#define PCI_DEVICE_ID_INTEL_TCF_UART_0 0x8811
+#define PCI_DEVICE_ID_INTEL_TCF_UART_1 0x8812
+#define PCI_DEVICE_ID_INTEL_TCF_UART_2 0x8813
+#define PCI_DEVICE_ID_INTEL_TCF_UART_3 0x8814
#define PCI_DEVICE_ID_INTEL_IXP2800 0x9004
#define PCI_DEVICE_ID_INTEL_S21152BB 0xb152
diff --git a/include/phy.h b/include/phy.h
index d430ed0..1e282e2 100644
--- a/include/phy.h
+++ b/include/phy.h
@@ -227,6 +227,7 @@ int gen10g_discover_mmds(struct phy_device *phydev);
int phy_atheros_init(void);
int phy_broadcom_init(void);
+int phy_cortina_init(void);
int phy_davicom_init(void);
int phy_et1011c_init(void);
int phy_lxt_init(void);
@@ -241,6 +242,7 @@ int phy_vitesse_init(void);
int board_phy_config(struct phy_device *phydev);
/* PHY UIDs for various PHYs that are referenced in external code */
+#define PHY_UID_CS4340 0x13e51002
#define PHY_UID_TN2020 0x00a19410
#endif
diff --git a/include/smsc_lpc47m.h b/include/smsc_lpc47m.h
new file mode 100644
index 0000000..bffd622
--- /dev/null
+++ b/include/smsc_lpc47m.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _SMSC_LPC47M_H_
+#define _SMSC_LPC47M_H_
+
+/**
+ * Configure the base I/O port of the specified serial device and enable the
+ * serial device.
+ *
+ * @dev: High 8 bits = Super I/O port, low 8 bits = logical device number.
+ * @iobase: Processor I/O port address to assign to this serial device.
+ */
+void lpc47m_enable_serial(u16 dev, u16 iobase);
+
+#endif /* _SMSC_LPC47M_H_ */
diff --git a/include/spi.h b/include/spi.h
index 5b78271..ec17bd0 100644
--- a/include/spi.h
+++ b/include/spi.h
@@ -34,6 +34,7 @@
/* SPI TX operation modes */
#define SPI_OPM_TX_QPP (1 << 0)
+#define SPI_OPM_TX_BP (1 << 1)
/* SPI RX operation modes */
#define SPI_OPM_RX_AS (1 << 0)
diff --git a/include/tps6586x.h b/include/tps6586x.h
index 78ce428..eefc95f 100644
--- a/include/tps6586x.h
+++ b/include/tps6586x.h
@@ -44,9 +44,9 @@ int tps6586x_adjust_sm0_sm1(int sm0_target, int sm1_target, int step, int rate,
* Set up the TPS6586X I2C bus number. This will be used for all operations
* on the device. This function must be called before using other functions.
*
- * @param bus I2C bus number containing the TPS6586X chip
+ * @param bus I2C bus containing the TPS6586X chip
* @return 0 (always succeeds)
*/
-int tps6586x_init(int bus);
+int tps6586x_init(struct udevice *bus);
#endif /* _TPS6586X_H_ */
diff --git a/include/twl4030.h b/include/twl4030.h
index f33cd1e..50f8da8 100644
--- a/include/twl4030.h
+++ b/include/twl4030.h
@@ -651,7 +651,7 @@ void twl4030_pmrecv_vsel_cfg(u8 vsel_reg, u8 vsel_val,
/* For initializing power device */
void twl4030_power_init(void);
/* For initializing mmc power */
-void twl4030_power_mmc_init(void);
+void twl4030_power_mmc_init(int dev_index);
/*
* LED
diff --git a/include/usb/ehci-fsl.h b/include/usb/ehci-fsl.h
index 897018b..e9349b5 100644
--- a/include/usb/ehci-fsl.h
+++ b/include/usb/ehci-fsl.h
@@ -280,7 +280,9 @@ struct usb_ehci {
#define MXC_EHCI_IPPUE_DOWN (1 << 10)
#define MXC_EHCI_IPPUE_UP (1 << 11)
+int usb_phy_mode(int port);
/* Board-specific initialization */
int board_ehci_hcd_init(int port);
+int board_usb_phy_mode(int port);
#endif /* _EHCI_FSL_H */
diff --git a/lib/Makefile b/lib/Makefile
index 320197a..07d175f 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -11,14 +11,12 @@ obj-$(CONFIG_RSA) += rsa/
obj-$(CONFIG_LZMA) += lzma/
obj-$(CONFIG_LZO) += lzo/
obj-$(CONFIG_ZLIB) += zlib/
+obj-$(CONFIG_BZIP2) += bzip2/
obj-$(CONFIG_TIZEN) += tizen/
+obj-$(CONFIG_OF_LIBFDT) += libfdt/
+obj-$(CONFIG_FIT) += libfdt/
obj-$(CONFIG_AES) += aes.o
-obj-$(CONFIG_BZIP2) += bzlib.o
-obj-$(CONFIG_BZIP2) += bzlib_crctable.o
-obj-$(CONFIG_BZIP2) += bzlib_decompress.o
-obj-$(CONFIG_BZIP2) += bzlib_randtable.o
-obj-$(CONFIG_BZIP2) += bzlib_huffman.o
obj-$(CONFIG_USB_TTY) += circbuf.o
obj-y += crc7.o
obj-y += crc8.o
@@ -53,6 +51,7 @@ endif
obj-$(CONFIG_ADDR_MAP) += addr_map.o
obj-y += hashtable.o
obj-y += errno.o
+obj-$(CONFIG_ERRNO_STR) += errno_str.o
obj-y += display_options.o
obj-$(CONFIG_BCH) += bch.o
obj-y += crc32.o
diff --git a/lib/asm-offsets.c b/lib/asm-offsets.c
index 580f763..129bc3e 100644
--- a/lib/asm-offsets.c
+++ b/lib/asm-offsets.c
@@ -31,9 +31,6 @@ int main(void)
#ifdef CONFIG_SYS_MALLOC_F_LEN
DEFINE(GD_MALLOC_BASE, offsetof(struct global_data, malloc_base));
#endif
-#ifdef CONFIG_X86
- DEFINE(GD_BIST, offsetof(struct global_data, arch.bist));
-#endif
#if defined(CONFIG_ARM)
diff --git a/lib/bzip2/Makefile b/lib/bzip2/Makefile
new file mode 100644
index 0000000..929c24e
--- /dev/null
+++ b/lib/bzip2/Makefile
@@ -0,0 +1,2 @@
+obj-y += bzlib.o bzlib_crctable.o bzlib_decompress.o \
+ bzlib_randtable.o bzlib_huffman.o
diff --git a/lib/bzlib.c b/lib/bzip2/bzlib.c
index 5844e18..5844e18 100644
--- a/lib/bzlib.c
+++ b/lib/bzip2/bzlib.c
diff --git a/lib/bzlib_crctable.c b/lib/bzip2/bzlib_crctable.c
index 325b966..325b966 100644
--- a/lib/bzlib_crctable.c
+++ b/lib/bzip2/bzlib_crctable.c
diff --git a/lib/bzlib_decompress.c b/lib/bzip2/bzlib_decompress.c
index 4412b8a..4412b8a 100644
--- a/lib/bzlib_decompress.c
+++ b/lib/bzip2/bzlib_decompress.c
diff --git a/lib/bzlib_huffman.c b/lib/bzip2/bzlib_huffman.c
index 801b8ec..801b8ec 100644
--- a/lib/bzlib_huffman.c
+++ b/lib/bzip2/bzlib_huffman.c
diff --git a/lib/bzlib_private.h b/lib/bzip2/bzlib_private.h
index 87d8f94..87d8f94 100644
--- a/lib/bzlib_private.h
+++ b/lib/bzip2/bzlib_private.h
diff --git a/lib/bzlib_randtable.c b/lib/bzip2/bzlib_randtable.c
index c3dc7e4..c3dc7e4 100644
--- a/lib/bzlib_randtable.c
+++ b/lib/bzip2/bzlib_randtable.c
diff --git a/lib/errno_str.c b/lib/errno_str.c
new file mode 100644
index 0000000..0ba950e
--- /dev/null
+++ b/lib/errno_str.c
@@ -0,0 +1,147 @@
+/*
+ * Copyright (C) 2014 Samsung Electronics
+ * Przemyslaw Marczak <p.marczak@samsung.com>
+ *
+ * SDPX-License-Identifier: GPL-2.0+
+ */
+#include <common.h>
+#include <errno.h>
+
+#define ERRNO_MSG(errno, msg) msg
+#define SAME_AS(x) (const char *)&errno_message[x]
+
+static const char * const errno_message[] = {
+ ERRNO_MSG(0, "Success"),
+ ERRNO_MSG(EPERM, "Operation not permitted"),
+ ERRNO_MSG(ENOEN, "No such file or directory"),
+ ERRNO_MSG(ESRCH, "No such process"),
+ ERRNO_MSG(EINTR, "Interrupted system call"),
+ ERRNO_MSG(EIO, "I/O error"),
+ ERRNO_MSG(ENXIO, "No such device or address"),
+ ERRNO_MSG(E2BIG, "Argument list too long"),
+ ERRNO_MSG(ENOEXEC, "Exec format error"),
+ ERRNO_MSG(EBADF, "Bad file number"),
+ ERRNO_MSG(ECHILD, "No child processes"),
+ ERRNO_MSG(EAGAIN, "Try again"),
+ ERRNO_MSG(ENOMEM, "Out of memory"),
+ ERRNO_MSG(EACCES, "Permission denied"),
+ ERRNO_MSG(EFAULT, "Bad address"),
+ ERRNO_MSG(ENOTBL, "Block device required"),
+ ERRNO_MSG(EBUSY, "Device or resource busy"),
+ ERRNO_MSG(EEXIST, "File exists"),
+ ERRNO_MSG(EXDEV, "Cross-device link"),
+ ERRNO_MSG(ENODEV, "No such device"),
+ ERRNO_MSG(ENOTDIR, "Not a directory"),
+ ERRNO_MSG(EISDIR, "Is a directory"),
+ ERRNO_MSG(EINVAL, "Invalid argument"),
+ ERRNO_MSG(ENFILE, "File table overflow"),
+ ERRNO_MSG(EMFILE, "Too many open files"),
+ ERRNO_MSG(ENOTTY, "Not a typewriter"),
+ ERRNO_MSG(ETXTBSY, "Text file busy"),
+ ERRNO_MSG(EFBIG, "File too large"),
+ ERRNO_MSG(ENOSPC, "No space left on device"),
+ ERRNO_MSG(ESPIPE, "Illegal seek"),
+ ERRNO_MSG(EROFS, "Read-only file system"),
+ ERRNO_MSG(EMLINK, "Too many links"),
+ ERRNO_MSG(EPIPE, "Broken pipe"),
+ ERRNO_MSG(EDOM, "Math argument out of domain of func"),
+ ERRNO_MSG(ERANGE, "Math result not representable"),
+ ERRNO_MSG(EDEADLK, "Resource deadlock would occur"),
+ ERRNO_MSG(ENAMETOOLONG, "File name too long"),
+ ERRNO_MSG(ENOLCK, "No record locks available"),
+ ERRNO_MSG(ENOSYS, "Function not implemented"),
+ ERRNO_MSG(ENOTEMPTY, "Directory not empty"),
+ ERRNO_MSG(ELOOP, "Too many symbolic links encountered"),
+ ERRNO_MSG(EWOULDBLOCK, SAME_AS(EAGAIN)),
+ ERRNO_MSG(ENOMSG, "No message of desired type"),
+ ERRNO_MSG(EIDRM, "Identifier removed"),
+ ERRNO_MSG(ECHRNG, "Channel number out of range"),
+ ERRNO_MSG(EL2NSYNC, "Level 2 not synchronized"),
+ ERRNO_MSG(EL3HLT, "Level 3 halted"),
+ ERRNO_MSG(EL3RST, "Level 3 reset"),
+ ERRNO_MSG(ELNRNG, "Link number out of range"),
+ ERRNO_MSG(EUNATCH, "Protocol driver not attached"),
+ ERRNO_MSG(ENOCSI, "No CSI structure available"),
+ ERRNO_MSG(EL2HLT, "Level 2 halted"),
+ ERRNO_MSG(EBADE, "Invalid exchange"),
+ ERRNO_MSG(EBADR, "Invalid request descriptor"),
+ ERRNO_MSG(EXFULL, "Exchange full"),
+ ERRNO_MSG(ENOANO, "No anode"),
+ ERRNO_MSG(EBADRQC, "Invalid request code"),
+ ERRNO_MSG(EBADSLT, "Invalid slot"),
+ ERRNO_MSG(EDEADLOCK, SAME_AS(EDEADLK)),
+ ERRNO_MSG(EBFONT, "Bad font file format"),
+ ERRNO_MSG(ENOSTR, "Device not a stream"),
+ ERRNO_MSG(ENODATA, "No data available"),
+ ERRNO_MSG(ETIME, "Timer expired"),
+ ERRNO_MSG(ENOSR, "Out of streams resources"),
+ ERRNO_MSG(ENONET, "Machine is not on the network"),
+ ERRNO_MSG(ENOPKG, "Package not installed"),
+ ERRNO_MSG(EREMOTE, "Object is remote"),
+ ERRNO_MSG(ENOLINK, "Link has been severed"),
+ ERRNO_MSG(EADV, "Advertise error"),
+ ERRNO_MSG(ESRMNT, "Srmount error"),
+ ERRNO_MSG(ECOMM, "Communication error on send"),
+ ERRNO_MSG(EPROTO, "Protocol error"),
+ ERRNO_MSG(EMULTIHOP, "Multihop attempted"),
+ ERRNO_MSG(EDOTDOT, "RFS specific error"),
+ ERRNO_MSG(EBADMSG, "Not a data message"),
+ ERRNO_MSG(EOVERFLOW, "Value too large for defined data type"),
+ ERRNO_MSG(ENOTUNIQ, "Name not unique on network"),
+ ERRNO_MSG(EBADFD, "File descriptor in bad state"),
+ ERRNO_MSG(EREMCHG, "Remote address changed"),
+ ERRNO_MSG(ELIBACC, "Can not access a needed shared library"),
+ ERRNO_MSG(ELIBBAD, "Accessing a corrupted shared library"),
+ ERRNO_MSG(ELIBSCN, ".lib section in a.out corrupted"),
+ ERRNO_MSG(ELIBMAX, "Attempting to link in too many shared libraries"),
+ ERRNO_MSG(ELIBEXEC, "Cannot exec a shared library directly"),
+ ERRNO_MSG(EILSEQ, "Illegal byte sequence"),
+ ERRNO_MSG(ERESTART, "Interrupted system call should be restarted"),
+ ERRNO_MSG(ESTRPIPE, "Streams pipe error"),
+ ERRNO_MSG(EUSERS, "Too many users"),
+ ERRNO_MSG(ENOTSOCK, "Socket operation on non-socket"),
+ ERRNO_MSG(EDESTADDRREQ, "Destination address required"),
+ ERRNO_MSG(EMSGSIZE, "Message too long"),
+ ERRNO_MSG(EPROTOTYPE, "Protocol wrong type for socket"),
+ ERRNO_MSG(ENOPROTOOPT, "Protocol not available"),
+ ERRNO_MSG(EPROTONOSUPPORT, "Protocol not supported"),
+ ERRNO_MSG(ESOCKTNOSUPPORT, "Socket type not supported"),
+ ERRNO_MSG(EOPNOTSUPP, "Operation not supported on transport endpoint"),
+ ERRNO_MSG(EPFNOSUPPORT, "Protocol family not supported"),
+ ERRNO_MSG(AFNOSUPPORT, "Address family not supported by protocol"),
+ ERRNO_MSG(EADDRINUSE, "Address already in use"),
+ ERRNO_MSG(EADDRNOTAVAIL, "Cannot assign requested address"),
+ ERRNO_MSG(ENETDOWN, "Network is down"),
+ ERRNO_MSG(ENETUNREACH, "Network is unreachable"),
+ ERRNO_MSG(ENETRESET, "Network dropped connection because of reset"),
+ ERRNO_MSG(ECONNABORTED, "Software caused connection abort"),
+ ERRNO_MSG(ECONNRESET, "Connection reset by peer"),
+ ERRNO_MSG(ENOBUFS, "No buffer space available"),
+ ERRNO_MSG(EISCONN, "Transport endpoint is already connected"),
+ ERRNO_MSG(ENOTCONN, "Transport endpoint is not connected"),
+ ERRNO_MSG(ESHUTDOWN, "Cannot send after transport endpoint shutdown"),
+ ERRNO_MSG(ETOOMANYREFS, "Too many references: cannot splice"),
+ ERRNO_MSG(ETIMEDOUT, "Connection timed out"),
+ ERRNO_MSG(ECONNREFUSED, "Connection refused"),
+ ERRNO_MSG(EHOSTDOWN, "Host is down"),
+ ERRNO_MSG(EHOSTUNREACH, "No route to host"),
+ ERRNO_MSG(EALREADY, "Operation already in progress"),
+ ERRNO_MSG(EINPROGRESS, "Operation now in progress"),
+ ERRNO_MSG(ESTALE, "Stale NFS file handle"),
+ ERRNO_MSG(EUCLEAN, "Structure needs cleaning"),
+ ERRNO_MSG(ENOTNAM, "Not a XENIX named type file"),
+ ERRNO_MSG(ENAVAIL, "No XENIX semaphores available"),
+ ERRNO_MSG(EISNAM, "Is a named type file"),
+ ERRNO_MSG(EREMOTEIO, "Remote I/O error"),
+ ERRNO_MSG(EDQUOT, "Quota exceeded"),
+ ERRNO_MSG(ENOMEDIUM, "No medium found"),
+ ERRNO_MSG(EMEDIUMTYPE, "Wrong medium type"),
+};
+
+const char *errno_str(int errno)
+{
+ if (errno >= 0)
+ return errno_message[0];
+
+ return errno_message[abs(errno)];
+}
diff --git a/lib/libfdt/Makefile b/lib/libfdt/Makefile
index 6fe79e0..2f5413f 100644
--- a/lib/libfdt/Makefile
+++ b/lib/libfdt/Makefile
@@ -5,8 +5,5 @@
# SPDX-License-Identifier: GPL-2.0+
#
-COBJS-libfdt += fdt.o fdt_ro.o fdt_rw.o fdt_strerror.o fdt_sw.o fdt_wip.o \
+obj-y += fdt.o fdt_ro.o fdt_rw.o fdt_strerror.o fdt_sw.o fdt_wip.o \
fdt_empty_tree.o fdt_addresses.o
-
-obj-$(CONFIG_OF_LIBFDT) += $(COBJS-libfdt)
-obj-$(CONFIG_FIT) += $(COBJS-libfdt)
diff --git a/lib/string.c b/lib/string.c
index 29c2ca7..87c9a40 100644
--- a/lib/string.c
+++ b/lib/string.c
@@ -102,6 +102,31 @@ char * strncpy(char * dest,const char *src,size_t count)
}
#endif
+#ifndef __HAVE_ARCH_STRLCPY
+/**
+ * strlcpy - Copy a C-string into a sized buffer
+ * @dest: Where to copy the string to
+ * @src: Where to copy the string from
+ * @size: size of destination buffer
+ *
+ * Compatible with *BSD: the result is always a valid
+ * NUL-terminated string that fits in the buffer (unless,
+ * of course, the buffer size is zero). It does not pad
+ * out the result like strncpy() does.
+ */
+size_t strlcpy(char *dest, const char *src, size_t size)
+{
+ size_t ret = strlen(src);
+
+ if (size) {
+ size_t len = (ret >= size) ? size - 1 : ret;
+ memcpy(dest, src, len);
+ dest[len] = '\0';
+ }
+ return ret;
+}
+#endif
+
#ifndef __HAVE_ARCH_STRCAT
/**
* strcat - Append one %NUL-terminated string to another
diff --git a/lib/zlib/zlib.h b/lib/zlib/zlib.h
index 556be32..af3703e 100644
--- a/lib/zlib/zlib.h
+++ b/lib/zlib/zlib.h
@@ -3,7 +3,7 @@
#define __GLUE_ZLIB_H__
#include <common.h>
-#include <compiler.h>
+#include <linux/compiler.h>
#include <asm/unaligned.h>
#include <watchdog.h>
#include "u-boot/zlib.h"
diff --git a/net/bootp.c b/net/bootp.c
index d4c86cf..8106601 100644
--- a/net/bootp.c
+++ b/net/bootp.c
@@ -145,8 +145,6 @@ static void BootpCopyNetParams(struct Bootp_t *bp)
if (tmp_ip != 0)
NetCopyIP(&NetServerIP, &bp->bp_siaddr);
memcpy(NetServerEther, ((struct ethernet_hdr *)NetRxPacket)->et_src, 6);
-#endif
- NetCopyIP(&NetOurIP, &bp->bp_yiaddr);
if (strlen(bp->bp_file) > 0)
copy_filename(BootFile, bp->bp_file, sizeof(BootFile));
@@ -158,6 +156,8 @@ static void BootpCopyNetParams(struct Bootp_t *bp)
*/
if (*BootFile)
setenv("bootfile", BootFile);
+#endif
+ NetCopyIP(&NetOurIP, &bp->bp_yiaddr);
}
static int truncate_sz(const char *name, int maxlen, int curlen)
diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl
index 1905446..ecf3037 100644
--- a/scripts/Makefile.spl
+++ b/scripts/Makefile.spl
@@ -34,6 +34,7 @@ SPL_BIN := u-boot-spl
endif
include $(srctree)/config.mk
+include $(srctree)/arch/$(ARCH)/Makefile
# Enable garbage collection of un-used sections for SPL
KBUILD_CFLAGS += -ffunction-sections -fdata-sections
@@ -45,21 +46,6 @@ cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \
HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)
-ifdef CONFIG_SPL_START_S_PATH
-START_PATH := $(CONFIG_SPL_START_S_PATH:"%"=%)
-else
-START_PATH := $(CPUDIR)
-endif
-
-head-y := $(START_PATH)/start.o
-head-$(CONFIG_X86) += $(START_PATH)/start16.o $(START_PATH)/resetvec.o
-head-$(CONFIG_4xx) += $(START_PATH)/resetvec.o
-head-$(CONFIG_MPC85xx) += $(START_PATH)/resetvec.o
-
-libs-y += arch/$(ARCH)/lib/
-
-libs-y += $(CPUDIR)/
-
libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
@@ -94,13 +80,6 @@ libs-$(CONFIG_SPL_USB_HOST_SUPPORT) += drivers/usb/host/
libs-$(CONFIG_OMAP_USB_PHY) += drivers/usb/phy/
libs-$(CONFIG_SPL_SATA_SUPPORT) += drivers/block/
-ifneq (,$(CONFIG_MX23)$(CONFIG_MX35)$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35))
-libs-y += arch/$(ARCH)/imx-common/
-endif
-
-libs-$(CONFIG_ARM) += arch/arm/cpu/
-libs-$(CONFIG_PPC) += arch/powerpc/cpu/
-
head-y := $(addprefix $(obj)/,$(head-y))
libs-y := $(addprefix $(obj)/,$(libs-y))
u-boot-spl-dirs := $(patsubst %/,%,$(filter %/, $(libs-y)))
diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl
index 7717d68..368a20e 100755
--- a/scripts/get_maintainer.pl
+++ b/scripts/get_maintainer.pl
@@ -835,8 +835,7 @@ sub top_of_kernel_tree {
if ($lk_path ne "" && substr($lk_path,length($lk_path)-1,1) ne "/") {
$lk_path .= "/";
}
- if ( (-f "${lk_path}CREDITS")
- && (-f "${lk_path}Kbuild")
+ if ( (-f "${lk_path}Kbuild")
&& (-f "${lk_path}MAINTAINERS")
&& (-f "${lk_path}Makefile")
&& (-f "${lk_path}README")
diff --git a/scripts/kconfig/menu.c b/scripts/kconfig/menu.c
index a26cc5d..72c9dba 100644
--- a/scripts/kconfig/menu.c
+++ b/scripts/kconfig/menu.c
@@ -548,7 +548,7 @@ static void get_prompt_str(struct gstr *r, struct property *prop,
{
int i, j;
struct menu *submenu[8], *menu, *location = NULL;
- struct jump_key *jump;
+ struct jump_key *jump = NULL;
str_printf(r, _("Prompt: %s\n"), _(prop->text));
menu = prop->menu->parent;
@@ -586,7 +586,7 @@ static void get_prompt_str(struct gstr *r, struct property *prop,
str_printf(r, _(" Location:\n"));
for (j = 4; --i >= 0; j += 2) {
menu = submenu[i];
- if (head && location && menu == location)
+ if (jump && menu == location)
jump->offset = strlen(r->s);
str_printf(r, "%*c-> %s", j, ' ',
_(menu_get_prompt(menu)));
diff --git a/test/dm/Makefile b/test/dm/Makefile
index 75d3d41..612aa95 100644
--- a/test/dm/Makefile
+++ b/test/dm/Makefile
@@ -20,4 +20,5 @@ ifneq ($(CONFIG_SANDBOX),)
obj-$(CONFIG_DM_GPIO) += gpio.o
obj-$(CONFIG_DM_SPI) += spi.o
obj-$(CONFIG_DM_SPI_FLASH) += sf.o
+obj-$(CONFIG_DM_I2C) += i2c.o
endif
diff --git a/test/dm/cmd_dm.c b/test/dm/cmd_dm.c
index 26980d2..79a674e 100644
--- a/test/dm/cmd_dm.c
+++ b/test/dm/cmd_dm.c
@@ -16,17 +16,65 @@
#include <dm/test.h>
#include <dm/uclass-internal.h>
+static void show_devices(struct udevice *dev, int depth, int last_flag)
+{
+ int i, is_last;
+ struct udevice *child;
+ char class_name[12];
+
+ /* print the first 11 characters to not break the tree-format. */
+ strlcpy(class_name, dev->uclass->uc_drv->name, sizeof(class_name));
+ printf(" %-11s [ %c ] ", class_name,
+ dev->flags & DM_FLAG_ACTIVATED ? '+' : ' ');
+
+ for (i = depth; i >= 0; i--) {
+ is_last = (last_flag >> i) & 1;
+ if (i) {
+ if (is_last)
+ printf(" ");
+ else
+ printf("| ");
+ } else {
+ if (is_last)
+ printf("`-- ");
+ else
+ printf("|-- ");
+ }
+ }
+
+ printf("%s\n", dev->name);
+
+ list_for_each_entry(child, &dev->child_head, sibling_node) {
+ is_last = list_is_last(&child->sibling_node, &dev->child_head);
+ show_devices(child, depth + 1, (last_flag << 1) | is_last);
+ }
+}
+
+static int do_dm_dump_all(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ struct udevice *root;
+
+ root = dm_root();
+ if (root) {
+ printf(" Class Probed Name\n");
+ printf("----------------------------------------\n");
+ show_devices(root, -1, 0);
+ }
+
+ return 0;
+}
+
/**
* dm_display_line() - Display information about a single device
*
* Displays a single line of information with an option prefix
*
* @dev: Device to display
- * @buf: Prefix to display at the start of the line
*/
-static void dm_display_line(struct udevice *dev, char *buf)
+static void dm_display_line(struct udevice *dev)
{
- printf("%s- %c %s @ %08lx", buf,
+ printf("- %c %s @ %08lx",
dev->flags & DM_FLAG_ACTIVATED ? '*' : ' ',
dev->name, (ulong)map_to_sysmem(dev));
if (dev->req_seq != -1)
@@ -34,53 +82,6 @@ static void dm_display_line(struct udevice *dev, char *buf)
puts("\n");
}
-static int display_succ(struct udevice *in, char *buf)
-{
- int len;
- int ip = 0;
- char local[16];
- struct udevice *pos, *n, *prev = NULL;
-
- dm_display_line(in, buf);
-
- if (list_empty(&in->child_head))
- return 0;
-
- len = strlen(buf);
- strncpy(local, buf, sizeof(local));
- snprintf(local + len, 2, "|");
- if (len && local[len - 1] == '`')
- local[len - 1] = ' ';
-
- list_for_each_entry_safe(pos, n, &in->child_head, sibling_node) {
- if (ip++)
- display_succ(prev, local);
- prev = pos;
- }
-
- snprintf(local + len, 2, "`");
- display_succ(prev, local);
-
- return 0;
-}
-
-static int dm_dump(struct udevice *dev)
-{
- if (!dev)
- return -EINVAL;
- return display_succ(dev, "");
-}
-
-static int do_dm_dump_all(cmd_tbl_t *cmdtp, int flag, int argc,
- char * const argv[])
-{
- struct udevice *root;
-
- root = dm_root();
- printf("ROOT %08lx\n", (ulong)map_to_sysmem(root));
- return dm_dump(root);
-}
-
static int do_dm_dump_uclass(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[])
{
@@ -99,7 +100,7 @@ static int do_dm_dump_uclass(cmd_tbl_t *cmdtp, int flag, int argc,
if (list_empty(&uc->dev_head))
continue;
list_for_each_entry(dev, &uc->dev_head, uclass_node) {
- dm_display_line(dev, "");
+ dm_display_line(dev);
}
puts("\n");
}
diff --git a/test/dm/i2c.c b/test/dm/i2c.c
new file mode 100644
index 0000000..a53e28d
--- /dev/null
+++ b/test/dm/i2c.c
@@ -0,0 +1,216 @@
+/*
+ * Copyright (C) 2013 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Note: Test coverage does not include 10-bit addressing
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <fdtdec.h>
+#include <i2c.h>
+#include <dm/device-internal.h>
+#include <dm/test.h>
+#include <dm/uclass-internal.h>
+#include <dm/ut.h>
+#include <dm/util.h>
+#include <asm/state.h>
+#include <asm/test.h>
+
+static const int busnum;
+static const int chip = 0x2c;
+
+/* Test that we can find buses and chips */
+static int dm_test_i2c_find(struct dm_test_state *dms)
+{
+ struct udevice *bus, *dev;
+ const int no_chip = 0x10;
+
+ ut_asserteq(-ENODEV, uclass_find_device_by_seq(UCLASS_I2C, busnum,
+ false, &bus));
+
+ /*
+ * i2c_post_bind() will bind devices to chip selects. Check this then
+ * remove the emulation and the slave device.
+ */
+ ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus));
+ ut_assertok(i2c_probe(bus, chip, 0, &dev));
+ ut_asserteq(-ENODEV, i2c_probe(bus, no_chip, 0, &dev));
+ ut_asserteq(-ENODEV, uclass_get_device_by_seq(UCLASS_I2C, 1, &bus));
+
+ return 0;
+}
+DM_TEST(dm_test_i2c_find, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
+
+static int dm_test_i2c_read_write(struct dm_test_state *dms)
+{
+ struct udevice *bus, *dev;
+ uint8_t buf[5];
+
+ ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus));
+ ut_assertok(i2c_get_chip(bus, chip, &dev));
+ ut_assertok(i2c_read(dev, 0, buf, 5));
+ ut_assertok(memcmp(buf, "\0\0\0\0\0", sizeof(buf)));
+ ut_assertok(i2c_write(dev, 2, (uint8_t *)"AB", 2));
+ ut_assertok(i2c_read(dev, 0, buf, 5));
+ ut_assertok(memcmp(buf, "\0\0AB\0", sizeof(buf)));
+
+ return 0;
+}
+DM_TEST(dm_test_i2c_read_write, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
+
+static int dm_test_i2c_speed(struct dm_test_state *dms)
+{
+ struct udevice *bus, *dev;
+ uint8_t buf[5];
+
+ ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus));
+ ut_assertok(i2c_get_chip(bus, chip, &dev));
+ ut_assertok(i2c_set_bus_speed(bus, 100000));
+ ut_assertok(i2c_read(dev, 0, buf, 5));
+ ut_assertok(i2c_set_bus_speed(bus, 400000));
+ ut_asserteq(400000, i2c_get_bus_speed(bus));
+ ut_assertok(i2c_read(dev, 0, buf, 5));
+ ut_asserteq(-EINVAL, i2c_write(dev, 0, buf, 5));
+
+ return 0;
+}
+DM_TEST(dm_test_i2c_speed, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
+
+static int dm_test_i2c_offset_len(struct dm_test_state *dms)
+{
+ struct udevice *bus, *dev;
+ uint8_t buf[5];
+
+ ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus));
+ ut_assertok(i2c_get_chip(bus, chip, &dev));
+ ut_assertok(i2c_set_chip_offset_len(dev, 1));
+ ut_assertok(i2c_read(dev, 0, buf, 5));
+
+ /* This is not supported by the uclass */
+ ut_asserteq(-EINVAL, i2c_set_chip_offset_len(dev, 5));
+
+ return 0;
+}
+DM_TEST(dm_test_i2c_offset_len, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
+
+static int dm_test_i2c_probe_empty(struct dm_test_state *dms)
+{
+ struct udevice *bus, *dev;
+
+ ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus));
+ ut_assertok(i2c_probe(bus, SANDBOX_I2C_TEST_ADDR, 0, &dev));
+
+ return 0;
+}
+DM_TEST(dm_test_i2c_probe_empty, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
+
+static int dm_test_i2c_bytewise(struct dm_test_state *dms)
+{
+ struct udevice *bus, *dev;
+ struct udevice *eeprom;
+ uint8_t buf[5];
+
+ ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus));
+ ut_assertok(i2c_get_chip(bus, chip, &dev));
+ ut_assertok(i2c_read(dev, 0, buf, 5));
+ ut_assertok(memcmp(buf, "\0\0\0\0\0", sizeof(buf)));
+
+ /* Tell the EEPROM to only read/write one register at a time */
+ ut_assertok(uclass_first_device(UCLASS_I2C_EMUL, &eeprom));
+ ut_assertnonnull(eeprom);
+ sandbox_i2c_eeprom_set_test_mode(eeprom, SIE_TEST_MODE_SINGLE_BYTE);
+
+ /* Now we only get the first byte - the rest will be 0xff */
+ ut_assertok(i2c_read(dev, 0, buf, 5));
+ ut_assertok(memcmp(buf, "\0\xff\xff\xff\xff", sizeof(buf)));
+
+ /* If we do a separate transaction for each byte, it works */
+ ut_assertok(i2c_set_chip_flags(dev, DM_I2C_CHIP_RD_ADDRESS));
+ ut_assertok(i2c_read(dev, 0, buf, 5));
+ ut_assertok(memcmp(buf, "\0\0\0\0\0", sizeof(buf)));
+
+ /* This will only write A */
+ ut_assertok(i2c_set_chip_flags(dev, 0));
+ ut_assertok(i2c_write(dev, 2, (uint8_t *)"AB", 2));
+ ut_assertok(i2c_read(dev, 0, buf, 5));
+ ut_assertok(memcmp(buf, "\0\xff\xff\xff\xff", sizeof(buf)));
+
+ /* Check that the B was ignored */
+ ut_assertok(i2c_set_chip_flags(dev, DM_I2C_CHIP_RD_ADDRESS));
+ ut_assertok(i2c_read(dev, 0, buf, 5));
+ ut_assertok(memcmp(buf, "\0\0A\0\0\0", sizeof(buf)));
+
+ /* Now write it again with the new flags, it should work */
+ ut_assertok(i2c_set_chip_flags(dev, DM_I2C_CHIP_WR_ADDRESS));
+ ut_assertok(i2c_write(dev, 2, (uint8_t *)"AB", 2));
+ ut_assertok(i2c_read(dev, 0, buf, 5));
+ ut_assertok(memcmp(buf, "\0\xff\xff\xff\xff", sizeof(buf)));
+
+ ut_assertok(i2c_set_chip_flags(dev, DM_I2C_CHIP_WR_ADDRESS |
+ DM_I2C_CHIP_RD_ADDRESS));
+ ut_assertok(i2c_read(dev, 0, buf, 5));
+ ut_assertok(memcmp(buf, "\0\0AB\0\0", sizeof(buf)));
+
+ /* Restore defaults */
+ sandbox_i2c_eeprom_set_test_mode(eeprom, SIE_TEST_MODE_NONE);
+ ut_assertok(i2c_set_chip_flags(dev, 0));
+
+ return 0;
+}
+DM_TEST(dm_test_i2c_bytewise, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
+
+static int dm_test_i2c_offset(struct dm_test_state *dms)
+{
+ struct udevice *eeprom;
+ struct udevice *dev;
+ uint8_t buf[5];
+
+ ut_assertok(i2c_get_chip_for_busnum(busnum, chip, &dev));
+
+ /* Do a transfer so we can find the emulator */
+ ut_assertok(i2c_read(dev, 0, buf, 5));
+ ut_assertok(uclass_first_device(UCLASS_I2C_EMUL, &eeprom));
+
+ /* Offset length 0 */
+ sandbox_i2c_eeprom_set_offset_len(eeprom, 0);
+ ut_assertok(i2c_set_chip_offset_len(dev, 0));
+ ut_assertok(i2c_write(dev, 10 /* ignored */, (uint8_t *)"AB", 2));
+ ut_assertok(i2c_read(dev, 0, buf, 5));
+ ut_assertok(memcmp(buf, "AB\0\0\0\0", sizeof(buf)));
+
+ /* Offset length 1 */
+ sandbox_i2c_eeprom_set_offset_len(eeprom, 1);
+ ut_assertok(i2c_set_chip_offset_len(dev, 1));
+ ut_assertok(i2c_write(dev, 2, (uint8_t *)"AB", 2));
+ ut_assertok(i2c_read(dev, 0, buf, 5));
+ ut_assertok(memcmp(buf, "ABAB\0", sizeof(buf)));
+
+ /* Offset length 2 */
+ sandbox_i2c_eeprom_set_offset_len(eeprom, 2);
+ ut_assertok(i2c_set_chip_offset_len(dev, 2));
+ ut_assertok(i2c_write(dev, 0x210, (uint8_t *)"AB", 2));
+ ut_assertok(i2c_read(dev, 0x210, buf, 5));
+ ut_assertok(memcmp(buf, "AB\0\0\0", sizeof(buf)));
+
+ /* Offset length 3 */
+ sandbox_i2c_eeprom_set_offset_len(eeprom, 2);
+ ut_assertok(i2c_set_chip_offset_len(dev, 2));
+ ut_assertok(i2c_write(dev, 0x410, (uint8_t *)"AB", 2));
+ ut_assertok(i2c_read(dev, 0x410, buf, 5));
+ ut_assertok(memcmp(buf, "AB\0\0\0", sizeof(buf)));
+
+ /* Offset length 4 */
+ sandbox_i2c_eeprom_set_offset_len(eeprom, 2);
+ ut_assertok(i2c_set_chip_offset_len(dev, 2));
+ ut_assertok(i2c_write(dev, 0x420, (uint8_t *)"AB", 2));
+ ut_assertok(i2c_read(dev, 0x420, buf, 5));
+ ut_assertok(memcmp(buf, "AB\0\0\0", sizeof(buf)));
+
+ /* Restore defaults */
+ sandbox_i2c_eeprom_set_offset_len(eeprom, 1);
+
+ return 0;
+}
+DM_TEST(dm_test_i2c_offset, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
diff --git a/test/dm/test.dts b/test/dm/test.dts
index 1fba792..fb0272a 100644
--- a/test/dm/test.dts
+++ b/test/dm/test.dts
@@ -93,6 +93,23 @@
num-gpios = <10>;
};
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ compatible = "sandbox,i2c";
+ clock-frequency = <100000>;
+ eeprom@2c {
+ reg = <0x2c>;
+ compatible = "i2c-eeprom";
+ emul {
+ compatible = "sandbox,i2c-eeprom";
+ sandbox,filename = "i2c.bin";
+ sandbox,size = <256>;
+ };
+ };
+ };
+
spi@0 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/test/ums/ums_gadget_test.sh b/test/ums/ums_gadget_test.sh
index 56d4616..9da486b 100755
--- a/test/ums/ums_gadget_test.sh
+++ b/test/ums/ums_gadget_test.sh
@@ -11,6 +11,7 @@ clear
COLOUR_RED="\33[31m"
COLOUR_GREEN="\33[32m"
+COLOUR_ORANGE="\33[33m"
COLOUR_DEFAULT="\33[0m"
DIR=./
@@ -59,8 +60,15 @@ ums_test_file () {
fi
cp ./$1 $MNT_DIR
- umount $MNT_DIR
+ while true; do
+ umount $MNT_DIR > /dev/null 2>&1
+ if [ $? -eq 0 ]; then
+ break
+ fi
+ printf "$COLOUR_ORANGE\tSleeping to wait for umount...$COLOUR_DEFAULT\n"
+ sleep 1
+ done
echo -n "TX: "
calculate_md5sum $1
diff --git a/tools/ifdtool.c b/tools/ifdtool.c
index a4b481f..4a27b82 100644
--- a/tools/ifdtool.c
+++ b/tools/ifdtool.c
@@ -732,6 +732,7 @@ static void print_usage(const char *name)
" -x | --extract: extract intel fd modules\n"
" -i | --inject <region>:<module> inject file <module> into region <region>\n"
" -w | --write <addr>:<file> write file to appear at memory address <addr>\n"
+ " multiple files can be written simultaneously\n"
" -s | --spifreq <20|33|50> set the SPI frequency\n"
" -e | --em100 set SPI frequency to 20MHz and disable\n"
" Dual Output Fast Read Support\n"
@@ -778,11 +779,13 @@ int main(int argc, char *argv[])
int mode_spifreq = 0, mode_em100 = 0, mode_locked = 0;
int mode_unlocked = 0, mode_write = 0, mode_write_descriptor = 0;
int create = 0;
- char *region_type_string = NULL, *src_fname = NULL;
- char *addr_str = NULL;
+ char *region_type_string = NULL, *inject_fname = NULL;
+ char *desc_fname = NULL, *addr_str = NULL;
int region_type = -1, inputfreq = 0;
enum spi_frequency spifreq = SPI_FREQUENCY_20MHZ;
- unsigned int addr = 0;
+ unsigned int addr[WRITE_MAX];
+ char *wr_fname[WRITE_MAX];
+ unsigned char wr_idx, wr_num = 0;
int rom_size = -1;
bool write_it;
char *filename;
@@ -820,14 +823,14 @@ int main(int argc, char *argv[])
break;
case 'D':
mode_write_descriptor = 1;
- src_fname = optarg;
+ desc_fname = optarg;
break;
case 'e':
mode_em100 = 1;
break;
case 'i':
if (get_two_words(optarg, &region_type_string,
- &src_fname)) {
+ &inject_fname)) {
print_usage(argv[0]);
exit(EXIT_FAILURE);
}
@@ -886,11 +889,19 @@ int main(int argc, char *argv[])
break;
case 'w':
mode_write = 1;
- if (get_two_words(optarg, &addr_str, &src_fname)) {
- print_usage(argv[0]);
- exit(EXIT_FAILURE);
+ if (wr_num < WRITE_MAX) {
+ if (get_two_words(optarg, &addr_str,
+ &wr_fname[wr_num])) {
+ print_usage(argv[0]);
+ exit(EXIT_FAILURE);
+ }
+ addr[wr_num] = strtol(optarg, NULL, 0);
+ wr_num++;
+ } else {
+ fprintf(stderr,
+ "The number of files to write simultaneously exceeds the limitation (%d)\n",
+ WRITE_MAX);
}
- addr = strtol(optarg, NULL, 0);
break;
case 'x':
mode_extract = 1;
@@ -997,13 +1008,19 @@ int main(int argc, char *argv[])
}
if (mode_write_descriptor)
- ret = write_data(image, size, -size, src_fname);
+ ret = write_data(image, size, -size, desc_fname);
if (mode_inject)
- ret = inject_region(image, size, region_type, src_fname);
+ ret = inject_region(image, size, region_type, inject_fname);
- if (mode_write)
- ret = write_data(image, size, addr, src_fname);
+ if (mode_write) {
+ for (wr_idx = 0; wr_idx < wr_num; wr_idx++) {
+ ret = write_data(image, size,
+ addr[wr_idx], wr_fname[wr_idx]);
+ if (ret)
+ break;
+ }
+ }
if (mode_spifreq)
set_spi_frequency(image, size, spifreq);
diff --git a/tools/ifdtool.h b/tools/ifdtool.h
index fbec421..0d0cc36 100644
--- a/tools/ifdtool.h
+++ b/tools/ifdtool.h
@@ -14,6 +14,8 @@
#define IFDTOOL_VERSION "1.1-U-Boot"
+#define WRITE_MAX 16
+
enum spi_frequency {
SPI_FREQUENCY_20MHZ = 0,
SPI_FREQUENCY_33MHZ = 1,
diff --git a/tools/pblimage.c b/tools/pblimage.c
index 6e6e801..2a799ab 100644
--- a/tools/pblimage.c
+++ b/tools/pblimage.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012-2014 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -8,6 +8,10 @@
#include "pblimage.h"
#include "pbl_crc32.h"
+#define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y))
+#define PBL_ACS_CONT_CMD 0x81000000
+#define PBL_ADDR_24BIT_MASK 0x00ffffff
+
/*
* Initialize to an invalid value.
*/
@@ -22,6 +26,13 @@ static int pbl_size;
static char *fname = "Unknown";
static int lineno = -1;
static struct pbl_header pblimage_header;
+static int uboot_size;
+static int arch_flag;
+
+static uint32_t pbl_cmd_initaddr;
+static uint32_t pbi_crc_cmd1;
+static uint32_t pbi_crc_cmd2;
+static uint32_t pbl_end_cmd[4];
static union
{
@@ -38,20 +49,6 @@ static union
* start offset by subtracting the size of the u-boot image from the
* top of the allowable 24-bit range.
*/
-static void init_next_pbl_cmd(FILE *fp_uboot)
-{
- struct stat st;
- int fd = fileno(fp_uboot);
-
- if (fstat(fd, &st) == -1) {
- printf("Error: Could not determine u-boot image size. %s\n",
- strerror(errno));
- exit(EXIT_FAILURE);
- }
-
- next_pbl_cmd = 0x82000000 - st.st_size;
-}
-
static void generate_pbl_cmd(void)
{
uint32_t val = next_pbl_cmd;
@@ -66,11 +63,15 @@ static void generate_pbl_cmd(void)
static void pbl_fget(size_t size, FILE *stream)
{
- unsigned char c;
+ unsigned char c = 0xff;
int c_temp;
- while (size && (c_temp = fgetc(stream)) != EOF) {
- c = (unsigned char)c_temp;
+ while (size) {
+ c_temp = fgetc(stream);
+ if (c_temp != EOF)
+ c = (unsigned char)c_temp;
+ else if ((c_temp == EOF) && (arch_flag == IH_ARCH_ARM))
+ c = 0xff;
*pmem_buf++ = c;
pbl_size++;
size--;
@@ -80,8 +81,8 @@ static void pbl_fget(size_t size, FILE *stream)
/* load split u-boot with PBI command 81xxxxxx. */
static void load_uboot(FILE *fp_uboot)
{
- init_next_pbl_cmd(fp_uboot);
- while (next_pbl_cmd < 0x82000000) {
+ next_pbl_cmd = pbl_cmd_initaddr - uboot_size;
+ while (next_pbl_cmd < pbl_cmd_initaddr) {
generate_pbl_cmd();
pbl_fget(64, fp_uboot);
}
@@ -154,8 +155,6 @@ static uint32_t reverse_byte(uint32_t val)
/* write end command and crc command to memory. */
static void add_end_cmd(void)
{
- uint32_t pbl_end_cmd[4] = {0x09138000, 0x00000000,
- 0x091380c0, 0x00000000};
uint32_t crc32_pbl;
int i;
unsigned char *p = (unsigned char *)&pbl_end_cmd;
@@ -172,8 +171,8 @@ static void add_end_cmd(void)
/* Add PBI CRC command. */
*pmem_buf++ = 0x08;
- *pmem_buf++ = 0x13;
- *pmem_buf++ = 0x80;
+ *pmem_buf++ = pbi_crc_cmd1;
+ *pmem_buf++ = pbi_crc_cmd2;
*pmem_buf++ = 0x40;
pbl_size += 4;
@@ -184,17 +183,6 @@ static void add_end_cmd(void)
*pmem_buf++ = (crc32_pbl >> 8) & 0xff;
*pmem_buf++ = (crc32_pbl) & 0xff;
pbl_size += 4;
-
- if ((pbl_size % 16) != 0) {
- for (i = 0; i < 8; i++) {
- *pmem_buf++ = 0x0;
- pbl_size++;
- }
- }
- if ((pbl_size % 16 != 0)) {
- printf("Error: Bad size of image file\n");
- exit(EXIT_FAILURE);
- }
}
void pbl_load_uboot(int ifd, struct image_tool_params *params)
@@ -268,12 +256,64 @@ static void pblimage_set_header(void *ptr, struct stat *sbuf, int ifd,
/*nothing need to do, pbl_load_uboot takes care of whole file. */
}
+int pblimage_check_params(struct image_tool_params *params)
+{
+ FILE *fp_uboot;
+ int fd;
+ struct stat st;
+
+ if (!params)
+ return EXIT_FAILURE;
+
+ fp_uboot = fopen(params->datafile, "r");
+ if (fp_uboot == NULL) {
+ printf("Error: %s open failed\n", params->datafile);
+ exit(EXIT_FAILURE);
+ }
+ fd = fileno(fp_uboot);
+
+ if (fstat(fd, &st) == -1) {
+ printf("Error: Could not determine u-boot image size. %s\n",
+ strerror(errno));
+ exit(EXIT_FAILURE);
+ }
+
+ /* For the variable size, we need to pad it to 64 byte boundary */
+ uboot_size = roundup(st.st_size, 64);
+
+ if (params->arch == IH_ARCH_ARM) {
+ arch_flag = IH_ARCH_ARM;
+ pbi_crc_cmd1 = 0x61;
+ pbi_crc_cmd2 = 0;
+ pbl_cmd_initaddr = params->addr & PBL_ADDR_24BIT_MASK;
+ pbl_cmd_initaddr |= PBL_ACS_CONT_CMD;
+ pbl_cmd_initaddr |= uboot_size;
+ pbl_end_cmd[0] = 0x09610000;
+ pbl_end_cmd[1] = 0x00000000;
+ pbl_end_cmd[2] = 0x096100c0;
+ pbl_end_cmd[3] = 0x00000000;
+ } else if (params->arch == IH_ARCH_PPC) {
+ arch_flag = IH_ARCH_PPC;
+ pbi_crc_cmd1 = 0x13;
+ pbi_crc_cmd2 = 0x80;
+ pbl_cmd_initaddr = 0x82000000;
+ pbl_end_cmd[0] = 0x09138000;
+ pbl_end_cmd[1] = 0x00000000;
+ pbl_end_cmd[2] = 0x091380c0;
+ pbl_end_cmd[3] = 0x00000000;
+ }
+
+ next_pbl_cmd = pbl_cmd_initaddr;
+ return 0;
+};
+
/* pblimage parameters */
static struct image_type_params pblimage_params = {
.name = "Freescale PBL Boot Image support",
.header_size = sizeof(struct pbl_header),
.hdr = (void *)&pblimage_header,
.check_image_type = pblimage_check_image_types,
+ .check_params = pblimage_check_params,
.verify_header = pblimage_verify_header,
.print_header = pblimage_print_header,
.set_header = pblimage_set_header,