diff options
83 files changed, 530 insertions, 1141 deletions
diff --git a/arch/arm/include/asm/arch-fsl-lsch3/config.h b/arch/arm/include/asm/arch-fsl-lsch3/config.h index c1c718e..b17410a 100644 --- a/arch/arm/include/asm/arch-fsl-lsch3/config.h +++ b/arch/arm/include/asm/arch-fsl-lsch3/config.h @@ -43,7 +43,11 @@ /* DDR */ #define CONFIG_SYS_FSL_DDR_LE #define CONFIG_VERY_BIG_RAM +#ifdef CONFIG_SYS_FSL_DDR4 +#define CONFIG_SYS_FSL_DDRC_GEN4 +#else #define CONFIG_SYS_FSL_DDRC_ARM_GEN3 /* Enable Freescale ARM DDR3 driver */ +#endif #define CONFIG_SYS_FSL_DDR /* Freescale DDR driver */ #define CONFIG_SYS_LS2_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30) #define CONFIG_MAX_MEM_MAPPED CONFIG_SYS_LS2_DDR_BLOCK1_SIZE diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index 214f3ea..6d18eb3 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -136,6 +136,7 @@ extern inline void __raw_readsl(unsigned long addr, void *data, int longlen) * TODO: The kernel offers some more advanced versions of barriers, it might * have some advantages to use them instead of the simple one here. */ +#define mb() asm volatile("dsb sy" : : : "memory") #define dmb() __asm__ __volatile__ ("" : : : "memory") #define __iormb() dmb() #define __iowmb() dmb() diff --git a/arch/powerpc/cpu/mpc83xx/cpu.c b/arch/powerpc/cpu/mpc83xx/cpu.c index e41988d..3809309 100644 --- a/arch/powerpc/cpu/mpc83xx/cpu.c +++ b/arch/powerpc/cpu/mpc83xx/cpu.c @@ -20,7 +20,7 @@ #include <netdev.h> #include <fsl_esdhc.h> #if defined(CONFIG_BOOTCOUNT_LIMIT) && !defined(CONFIG_MPC831x) -#include <asm/immap_qe.h> +#include <linux/immap_qe.h> #include <asm/io.h> #endif diff --git a/arch/powerpc/cpu/mpc83xx/fdt.c b/arch/powerpc/cpu/mpc83xx/fdt.c index 450a970..f249a58 100644 --- a/arch/powerpc/cpu/mpc83xx/fdt.c +++ b/arch/powerpc/cpu/mpc83xx/fdt.c @@ -18,7 +18,7 @@ DECLARE_GLOBAL_DATA_PTR; #if defined(CONFIG_BOOTCOUNT_LIMIT) && \ (defined(CONFIG_QE) && !defined(CONFIG_MPC831x)) -#include <asm/immap_qe.h> +#include <linux/immap_qe.h> void fdt_fixup_muram (void *blob) { diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index 78316a6..b237505 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -200,7 +200,7 @@ void config_8560_ioports (volatile ccsr_cpm_t * cpm) #ifdef CONFIG_SYS_FSL_CPC #if defined(CONFIG_RAMBOOT_PBL) || defined(CONFIG_SYS_CPC_REINIT_F) -static void disable_cpc_sram(void) +void disable_cpc_sram(void) { int i; @@ -251,7 +251,7 @@ static void enable_tdm_law(void) } #endif -static void enable_cpc(void) +void enable_cpc(void) { int i; u32 size = 0; @@ -306,6 +306,7 @@ static void invalidate_cpc(void) #else #define enable_cpc() #define invalidate_cpc() +#define disable_cpc_sram() #endif /* CONFIG_SYS_FSL_CPC */ /* @@ -520,7 +521,8 @@ int enable_cluster_l2(void) u32 idx = (cluster >> (j*8)) & TP_CLUSTER_INIT_MASK; u32 type = in_be32(&gur->tp_ityp[idx]); - if (type & TP_ITYP_AV) + if ((type & TP_ITYP_AV) && + TP_ITYP_TYPE(type) == TP_ITYP_TYPE_PPC) cluster_valid = 1; } @@ -545,88 +547,15 @@ int enable_cluster_l2(void) /* * Initialize L2 as cache. - * - * The newer 8548, etc, parts have twice as much cache, but - * use the same bit-encoding as the older 8555, etc, parts. - * */ -int cpu_init_r(void) +int l2cache_init(void) { __maybe_unused u32 svr = get_svr(); -#ifdef CONFIG_SYS_LBC_LCRR - fsl_lbc_t *lbc = (void __iomem *)LBC_BASE_ADDR; -#endif #ifdef CONFIG_L2_CACHE ccsr_l2cache_t *l2cache = (void __iomem *)CONFIG_SYS_MPC85xx_L2_ADDR; #elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) && defined(CONFIG_E6500) struct ccsr_cluster_l2 * l2cache = (void __iomem *)CONFIG_SYS_FSL_CLUSTER_1_L2; #endif -#if defined(CONFIG_PPC_SPINTABLE_COMPATIBLE) && defined(CONFIG_MP) - extern int spin_table_compat; - const char *spin; -#endif -#ifdef CONFIG_SYS_FSL_ERRATUM_SEC_A003571 - ccsr_sec_t __iomem *sec = (void *)CONFIG_SYS_FSL_SEC_ADDR; -#endif -#if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \ - defined(CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011) - /* - * CPU22 and NMG_CPU_A011 share the same workaround. - * CPU22 applies to P4080 rev 1.0, 2.0, fixed in 3.0 - * NMG_CPU_A011 applies to P4080 rev 1.0, 2.0, fixed in 3.0 - * also applies to P3041 rev 1.0, 1.1, P2041 rev 1.0, 1.1, both - * fixed in 2.0. NMG_CPU_A011 is activated by default and can - * be disabled by hwconfig with syntax: - * - * fsl_cpu_a011:disable - */ - extern int enable_cpu_a011_workaround; -#ifdef CONFIG_SYS_P4080_ERRATUM_CPU22 - enable_cpu_a011_workaround = (SVR_MAJ(svr) < 3); -#else - char buffer[HWCONFIG_BUFFER_SIZE]; - char *buf = NULL; - int n, res; - - n = getenv_f("hwconfig", buffer, sizeof(buffer)); - if (n > 0) - buf = buffer; - - res = hwconfig_arg_cmp_f("fsl_cpu_a011", "disable", buf); - if (res > 0) - enable_cpu_a011_workaround = 0; - else { - if (n >= HWCONFIG_BUFFER_SIZE) { - printf("fsl_cpu_a011 was not found. hwconfig variable " - "may be too long\n"); - } - enable_cpu_a011_workaround = - (SVR_SOC_VER(svr) == SVR_P4080 && SVR_MAJ(svr) < 3) || - (SVR_SOC_VER(svr) != SVR_P4080 && SVR_MAJ(svr) < 2); - } -#endif - if (enable_cpu_a011_workaround) { - flush_dcache(); - mtspr(L1CSR2, (mfspr(L1CSR2) | L1CSR2_DCWS)); - sync(); - } -#endif -#ifdef CONFIG_SYS_FSL_ERRATUM_A005812 - /* - * A-005812 workaround sets bit 32 of SPR 976 for SoCs running - * in write shadow mode. Checking DCWS before setting SPR 976. - */ - if (mfspr(L1CSR2) & L1CSR2_DCWS) - mtspr(SPRN_HDBCR0, (mfspr(SPRN_HDBCR0) | 0x80000000)); -#endif - -#if defined(CONFIG_PPC_SPINTABLE_COMPATIBLE) && defined(CONFIG_MP) - spin = getenv("spin_table_compat"); - if (spin && (*spin == 'n')) - spin_table_compat = 0; - else - spin_table_compat = 1; -#endif puts ("L2: "); @@ -751,6 +680,89 @@ skip_l2: puts("disabled\n"); #endif + return 0; +} + +/* + * + * The newer 8548, etc, parts have twice as much cache, but + * use the same bit-encoding as the older 8555, etc, parts. + * + */ +int cpu_init_r(void) +{ + __maybe_unused u32 svr = get_svr(); +#ifdef CONFIG_SYS_LBC_LCRR + fsl_lbc_t *lbc = (void __iomem *)LBC_BASE_ADDR; +#endif +#if defined(CONFIG_PPC_SPINTABLE_COMPATIBLE) && defined(CONFIG_MP) + extern int spin_table_compat; + const char *spin; +#endif +#ifdef CONFIG_SYS_FSL_ERRATUM_SEC_A003571 + ccsr_sec_t __iomem *sec = (void *)CONFIG_SYS_FSL_SEC_ADDR; +#endif +#if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \ + defined(CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011) + /* + * CPU22 and NMG_CPU_A011 share the same workaround. + * CPU22 applies to P4080 rev 1.0, 2.0, fixed in 3.0 + * NMG_CPU_A011 applies to P4080 rev 1.0, 2.0, fixed in 3.0 + * also applies to P3041 rev 1.0, 1.1, P2041 rev 1.0, 1.1, both + * fixed in 2.0. NMG_CPU_A011 is activated by default and can + * be disabled by hwconfig with syntax: + * + * fsl_cpu_a011:disable + */ + extern int enable_cpu_a011_workaround; +#ifdef CONFIG_SYS_P4080_ERRATUM_CPU22 + enable_cpu_a011_workaround = (SVR_MAJ(svr) < 3); +#else + char buffer[HWCONFIG_BUFFER_SIZE]; + char *buf = NULL; + int n, res; + + n = getenv_f("hwconfig", buffer, sizeof(buffer)); + if (n > 0) + buf = buffer; + + res = hwconfig_arg_cmp_f("fsl_cpu_a011", "disable", buf); + if (res > 0) { + enable_cpu_a011_workaround = 0; + } else { + if (n >= HWCONFIG_BUFFER_SIZE) { + printf("fsl_cpu_a011 was not found. hwconfig variable " + "may be too long\n"); + } + enable_cpu_a011_workaround = + (SVR_SOC_VER(svr) == SVR_P4080 && SVR_MAJ(svr) < 3) || + (SVR_SOC_VER(svr) != SVR_P4080 && SVR_MAJ(svr) < 2); + } +#endif + if (enable_cpu_a011_workaround) { + flush_dcache(); + mtspr(L1CSR2, (mfspr(L1CSR2) | L1CSR2_DCWS)); + sync(); + } +#endif +#ifdef CONFIG_SYS_FSL_ERRATUM_A005812 + /* + * A-005812 workaround sets bit 32 of SPR 976 for SoCs running + * in write shadow mode. Checking DCWS before setting SPR 976. + */ + if (mfspr(L1CSR2) & L1CSR2_DCWS) + mtspr(SPRN_HDBCR0, (mfspr(SPRN_HDBCR0) | 0x80000000)); +#endif + +#if defined(CONFIG_PPC_SPINTABLE_COMPATIBLE) && defined(CONFIG_MP) + spin = getenv("spin_table_compat"); + if (spin && (*spin == 'n')) + spin_table_compat = 0; + else + spin_table_compat = 1; +#endif + + l2cache_init(); #if defined(CONFIG_RAMBOOT_PBL) disable_cpc_sram(); #endif diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c index 85dfa5b..3665ec6 100644 --- a/arch/powerpc/cpu/mpc85xx/fdt.c +++ b/arch/powerpc/cpu/mpc85xx/fdt.c @@ -612,6 +612,51 @@ static void fdt_fixup_usb(void *fdt) #define fdt_fixup_usb(x) #endif +#if defined(CONFIG_PPC_T2080) || defined(CONFIG_PPC_T4240) || \ + defined(CONFIG_PPC_T4160) || defined(CONFIG_PPC_T4080) +void fdt_fixup_dma3(void *blob) +{ + /* the 3rd DMA is not functional if SRIO2 is chosen */ + int nodeoff; + ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + +#define CONFIG_SYS_ELO3_DMA3 (0xffe000000 + 0x102300) +#if defined(CONFIG_PPC_T2080) + u32 srds_prtcl_s2 = in_be32(&gur->rcwsr[4]) & + FSL_CORENET2_RCWSR4_SRDS2_PRTCL; + srds_prtcl_s2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT; + + switch (srds_prtcl_s2) { + case 0x29: + case 0x2d: + case 0x2e: +#elif defined(CONFIG_PPC_T4240) || defined(CONFIG_PPC_T4160) || \ + defined(CONFIG_PPC_T4080) + u32 srds_prtcl_s4 = in_be32(&gur->rcwsr[4]) & + FSL_CORENET2_RCWSR4_SRDS4_PRTCL; + srds_prtcl_s4 >>= FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT; + + switch (srds_prtcl_s4) { + case 6: + case 8: + case 14: + case 16: +#endif + nodeoff = fdt_node_offset_by_compat_reg(blob, "fsl,elo3-dma", + CONFIG_SYS_ELO3_DMA3); + if (nodeoff > 0) + fdt_status_disabled(blob, nodeoff); + else + printf("WARNING: unable to disable dma3\n"); + break; + default: + break; + } +} +#else +#define fdt_fixup_dma3(x) +#endif + #if defined(CONFIG_PPC_T1040) static void fdt_fixup_l2_switch(void *blob) { @@ -778,6 +823,8 @@ void ft_cpu_setup(void *blob, bd_t *bd) fdt_fixup_usb(blob); fdt_fixup_l2_switch(blob); + + fdt_fixup_dma3(blob); } /* diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c index 15561a1..84fec5e 100644 --- a/arch/powerpc/cpu/mpc8xxx/cpu.c +++ b/arch/powerpc/cpu/mpc8xxx/cpu.c @@ -65,7 +65,6 @@ static struct cpu_type cpu_type_list[] = { CPU_TYPE_ENTRY(T4080, T4080, 4), CPU_TYPE_ENTRY(B4860, B4860, 0), CPU_TYPE_ENTRY(G4860, G4860, 0), - CPU_TYPE_ENTRY(G4060, G4060, 0), CPU_TYPE_ENTRY(B4440, B4440, 0), CPU_TYPE_ENTRY(B4460, B4460, 0), CPU_TYPE_ENTRY(G4440, G4440, 0), diff --git a/arch/powerpc/cpu/ppc4xx/cpu_init.c b/arch/powerpc/cpu/ppc4xx/cpu_init.c index d465dcd..0b27d29 100644 --- a/arch/powerpc/cpu/ppc4xx/cpu_init.c +++ b/arch/powerpc/cpu/ppc4xx/cpu_init.c @@ -12,9 +12,7 @@ #include <asm/ppc4xx-gpio.h> #include <asm/ppc4xx.h> -#if defined(CONFIG_405GP) || defined(CONFIG_405EP) DECLARE_GLOBAL_DATA_PTR; -#endif #ifndef CONFIG_SYS_PLL_RECONFIG #define CONFIG_SYS_PLL_RECONFIG 0 @@ -451,6 +449,8 @@ cpu_init_f (void) mtdcr(PLB4A1_ACR, (mfdcr(PLB4A1_ACR) & ~PLB4Ax_ACR_RDP_MASK) | PLB4Ax_ACR_RDP_4DEEP); #endif /* CONFIG_440SP/SPE || CONFIG_460EX/GT || CONFIG_405EX */ + + gd = (gd_t *)(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); } /* diff --git a/arch/powerpc/include/asm/cache.h b/arch/powerpc/include/asm/cache.h index cdc1f10..d3a8391 100644 --- a/arch/powerpc/include/asm/cache.h +++ b/arch/powerpc/include/asm/cache.h @@ -57,6 +57,12 @@ extern void unlock_ram_in_cache(void); #endif /* CONFIG_SYS_INIT_RAM_LOCK */ #endif /* __ASSEMBLY__ */ +#if defined(__KERNEL__) && !defined(__ASSEMBLY__) +int l2cache_init(void); +void enable_cpc(void); +void disable_cpc_sram(void); +#endif + /* prep registers for L2 */ #define CACHECRBA 0x80000823 /* Cache configuration register address */ #define L2CACHE_MASK 0x03 /* Mask for 2 L2 Cache bits */ diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index 8258ab3..dfb370e 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -2905,6 +2905,8 @@ struct ccsr_sfp_regs { #endif #define CONFIG_SYS_FSL_CORENET_SERDES_OFFSET 0xEA000 #define CONFIG_SYS_FSL_CORENET_SERDES2_OFFSET 0xEB000 +#define CONFIG_SYS_FSL_CORENET_SERDES3_OFFSET 0xEC000 +#define CONFIG_SYS_FSL_CORENET_SERDES4_OFFSET 0xED000 #define CONFIG_SYS_FSL_CPC_OFFSET 0x10000 #define CONFIG_SYS_FSL_SCFG_OFFSET 0xFC000 #define CONFIG_SYS_MPC85xx_DMA1_OFFSET 0x100000 @@ -3090,6 +3092,10 @@ struct ccsr_sfp_regs { (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_SERDES_OFFSET) #define CONFIG_SYS_FSL_CORENET_SERDES2_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_SERDES2_OFFSET) +#define CONFIG_SYS_FSL_CORENET_SERDES3_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_SERDES3_OFFSET) +#define CONFIG_SYS_FSL_CORENET_SERDES4_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_SERDES4_OFFSET) #define CONFIG_SYS_MPC85xx_USB1_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_USB1_OFFSET) #define CONFIG_SYS_MPC85xx_USB2_ADDR \ diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h index d8b7b97..a5257e9 100644 --- a/arch/powerpc/include/asm/io.h +++ b/arch/powerpc/include/asm/io.h @@ -123,6 +123,9 @@ static inline void isync(void) #define iobarrier_r() eieio() #define iobarrier_w() eieio() +#define mb() sync() +#define isb() isync() + /* * Non ordered and non-swapping "raw" accessors */ diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index a5e7a61..2445acd 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -1118,7 +1118,6 @@ #define SVR_B4860 0X868000 #define SVR_G4860 0x868001 #define SVR_B4460 0x868003 -#define SVR_G4060 0x868003 #define SVR_B4440 0x868100 #define SVR_G4440 0x868101 #define SVR_B4420 0x868102 diff --git a/arch/powerpc/lib/board.c b/arch/powerpc/lib/board.c index 300ab12..50eb820 100644 --- a/arch/powerpc/lib/board.c +++ b/arch/powerpc/lib/board.c @@ -370,6 +370,11 @@ void board_init_f(ulong bootflag) #ifdef CONFIG_DEEP_SLEEP /* Jump to kernel in deep sleep case */ if (in_be32(&gur->scrtsr[0]) & (1 << 3)) { + l2cache_init(); +#if defined(CONFIG_RAMBOOT_PBL) + disable_cpc_sram(); +#endif + enable_cpc(); start_addr = in_be32(&scfg->sparecr[1]); kernel_resume = (func_t)start_addr; kernel_resume(); diff --git a/board/exmeritus/hww1u1a/hww1u1a.c b/board/exmeritus/hww1u1a/hww1u1a.c index 97b84b3..643ece1 100644 --- a/board/exmeritus/hww1u1a/hww1u1a.c +++ b/board/exmeritus/hww1u1a/hww1u1a.c @@ -203,7 +203,7 @@ void pci_init_board(void) int board_early_init_r(void) { const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; - const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); + int flash_esel = find_tlb_idx((void *)flashbase, 1); /* * Remap bootflash region to caching-inhibited @@ -214,8 +214,14 @@ int board_early_init_r(void) flush_dcache(); invalidate_icache(); - /* invalidate existing TLB entry for FLASH */ - disable_tlb(flash_esel); + if (flash_esel == -1) { + /* very unlikely unless something is messed up */ + puts("Error: Could not find TLB for FLASH BASE\n"); + flash_esel = 2; /* give our best effort to continue */ + } else { + /* invalidate existing TLB entry for FLASH */ + disable_tlb(flash_esel); + } set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, diff --git a/board/freescale/b4860qds/b4860qds.c b/board/freescale/b4860qds/b4860qds.c index 9d6b9a7..34d66d5 100644 --- a/board/freescale/b4860qds/b4860qds.c +++ b/board/freescale/b4860qds/b4860qds.c @@ -913,7 +913,7 @@ out: int board_early_init_r(void) { const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; - const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); + int flash_esel = find_tlb_idx((void *)flashbase, 1); int ret; /* @@ -925,8 +925,14 @@ int board_early_init_r(void) flush_dcache(); invalidate_icache(); - /* invalidate existing TLB entry for flash + promjet */ - disable_tlb(flash_esel); + if (flash_esel == -1) { + /* very unlikely unless something is messed up */ + puts("Error: Could not find TLB for FLASH BASE\n"); + flash_esel = 2; /* give our best effort to continue */ + } else { + /* invalidate existing TLB entry for flash + promjet */ + disable_tlb(flash_esel); + } set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, diff --git a/board/freescale/bsc9132qds/bsc9132qds.c b/board/freescale/bsc9132qds/bsc9132qds.c index 9377280..10580bc 100644 --- a/board/freescale/bsc9132qds/bsc9132qds.c +++ b/board/freescale/bsc9132qds/bsc9132qds.c @@ -150,7 +150,7 @@ int board_early_init_r(void) { #ifndef CONFIG_SYS_NO_FLASH const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; - const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); + int flash_esel = find_tlb_idx((void *)flashbase, 1); /* * Remap Boot flash region to caching-inhibited @@ -161,8 +161,14 @@ int board_early_init_r(void) flush_dcache(); invalidate_icache(); - /* invalidate existing TLB entry for flash */ - disable_tlb(flash_esel); + if (flash_esel == -1) { + /* very unlikely unless something is messed up */ + puts("Error: Could not find TLB for FLASH BASE\n"); + flash_esel = 2; /* give our best effort to continue */ + } else { + /* invalidate existing TLB entry for flash */ + disable_tlb(flash_esel); + } set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, diff --git a/board/freescale/c29xpcie/c29xpcie.c b/board/freescale/c29xpcie/c29xpcie.c index f964d61..534c6d1 100644 --- a/board/freescale/c29xpcie/c29xpcie.c +++ b/board/freescale/c29xpcie/c29xpcie.c @@ -49,7 +49,7 @@ int board_early_init_f(void) int board_early_init_r(void) { const unsigned long flashbase = CONFIG_SYS_FLASH_BASE; - const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); + int flash_esel = find_tlb_idx((void *)flashbase, 1); /* * Remap Boot flash region to caching-inhibited @@ -60,8 +60,14 @@ int board_early_init_r(void) flush_dcache(); invalidate_icache(); - /* invalidate existing TLB entry for flash */ - disable_tlb(flash_esel); + if (flash_esel == -1) { + /* very unlikely unless something is messed up */ + puts("Error: Could not find TLB for FLASH BASE\n"); + flash_esel = 1; /* give our best effort to continue */ + } else { + /* invalidate existing TLB entry for flash */ + disable_tlb(flash_esel); + } set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, diff --git a/board/freescale/corenet_ds/corenet_ds.c b/board/freescale/corenet_ds/corenet_ds.c index 9212372..65b3867 100644 --- a/board/freescale/corenet_ds/corenet_ds.c +++ b/board/freescale/corenet_ds/corenet_ds.c @@ -101,7 +101,7 @@ int board_early_init_f(void) int board_early_init_r(void) { const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; - const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); + int flash_esel = find_tlb_idx((void *)flashbase, 1); /* * Remap Boot flash + PROMJET region to caching-inhibited @@ -112,8 +112,14 @@ int board_early_init_r(void) flush_dcache(); invalidate_icache(); - /* invalidate existing TLB entry for flash + promjet */ - disable_tlb(flash_esel); + if (flash_esel == -1) { + /* very unlikely unless something is messed up */ + puts("Error: Could not find TLB for FLASH BASE\n"); + flash_esel = 2; /* give our best effort to continue */ + } else { + /* invalidate existing TLB entry for flash + promjet */ + disable_tlb(flash_esel); + } set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, /* tlb, epn, rpn */ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, /* perms, wimge */ diff --git a/board/freescale/mpc8536ds/mpc8536ds.c b/board/freescale/mpc8536ds/mpc8536ds.c index 467f4f2..93eed59 100644 --- a/board/freescale/mpc8536ds/mpc8536ds.c +++ b/board/freescale/mpc8536ds/mpc8536ds.c @@ -196,7 +196,7 @@ void pci_init_board(void) int board_early_init_r(void) { const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; - const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); + int flash_esel = find_tlb_idx((void *)flashbase, 1); /* * Remap Boot flash + PROMJET region to caching-inhibited @@ -207,8 +207,14 @@ int board_early_init_r(void) flush_dcache(); invalidate_icache(); - /* invalidate existing TLB entry for flash + promjet */ - disable_tlb(flash_esel); + if (flash_esel == -1) { + /* very unlikely unless something is messed up */ + puts("Error: Could not find TLB for FLASH BASE\n"); + flash_esel = 1; /* give our best effort to continue */ + } else { + /* invalidate existing TLB entry for flash + promjet */ + disable_tlb(flash_esel); + } set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, /* tlb, epn, rpn */ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, /* perms, wimge */ diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c index 5686322..1bbf832 100644 --- a/board/freescale/mpc8572ds/mpc8572ds.c +++ b/board/freescale/mpc8572ds/mpc8572ds.c @@ -144,7 +144,7 @@ void pci_init_board(void) int board_early_init_r(void) { const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; - const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); + int flash_esel = find_tlb_idx((void *)flashbase, 1); /* * Remap Boot flash + PROMJET region to caching-inhibited @@ -155,8 +155,14 @@ int board_early_init_r(void) flush_dcache(); invalidate_icache(); - /* invalidate existing TLB entry for flash + promjet */ - disable_tlb(flash_esel); + if (flash_esel == -1) { + /* very unlikely unless something is messed up */ + puts("Error: Could not find TLB for FLASH BASE\n"); + flash_esel = 2; /* give our best effort to continue */ + } else { + /* invalidate existing TLB entry for flash + promjet */ + disable_tlb(flash_esel); + } set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, /* tlb, epn, rpn */ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, /* perms, wimge */ diff --git a/board/freescale/p1010rdb/p1010rdb.c b/board/freescale/p1010rdb/p1010rdb.c index 62caf67..491b576 100644 --- a/board/freescale/p1010rdb/p1010rdb.c +++ b/board/freescale/p1010rdb/p1010rdb.c @@ -93,7 +93,7 @@ int board_early_init_f(void) int board_early_init_r(void) { const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; - const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); + int flash_esel = find_tlb_idx((void *)flashbase, 1); /* * Remap Boot flash region to caching-inhibited @@ -104,8 +104,14 @@ int board_early_init_r(void) flush_dcache(); invalidate_icache(); - /* invalidate existing TLB entry for flash */ - disable_tlb(flash_esel); + if (flash_esel == -1) { + /* very unlikely unless something is messed up */ + puts("Error: Could not find TLB for FLASH BASE\n"); + flash_esel = 2; /* give our best effort to continue */ + } else { + /* invalidate existing TLB entry for flash */ + disable_tlb(flash_esel); + } set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, diff --git a/board/freescale/p1022ds/p1022ds.c b/board/freescale/p1022ds/p1022ds.c index ba789a4..f5e1851 100644 --- a/board/freescale/p1022ds/p1022ds.c +++ b/board/freescale/p1022ds/p1022ds.c @@ -249,7 +249,7 @@ void pci_init_board(void) int board_early_init_r(void) { const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; - const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); + int flash_esel = find_tlb_idx((void *)flashbase, 1); /* * Remap Boot flash + PROMJET region to caching-inhibited @@ -260,8 +260,14 @@ int board_early_init_r(void) flush_dcache(); invalidate_icache(); - /* invalidate existing TLB entry for flash + promjet */ - disable_tlb(flash_esel); + if (flash_esel == -1) { + /* very unlikely unless something is messed up */ + puts("Error: Could not find TLB for FLASH BASE\n"); + flash_esel = 2; /* give our best effort to continue */ + } else { + /* invalidate existing TLB entry for flash + promjet */ + disable_tlb(flash_esel); + } set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, diff --git a/board/freescale/p1023rdb/p1023rdb.c b/board/freescale/p1023rdb/p1023rdb.c index d2d4f83..d4d277b 100644 --- a/board/freescale/p1023rdb/p1023rdb.c +++ b/board/freescale/p1023rdb/p1023rdb.c @@ -57,7 +57,7 @@ void pci_init_board(void) int board_early_init_r(void) { const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; - const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); + int flash_esel = find_tlb_idx((void *)flashbase, 1); /* * Remap Boot flash + PROMJET region to caching-inhibited @@ -68,8 +68,14 @@ int board_early_init_r(void) flush_dcache(); invalidate_icache(); - /* invalidate existing TLB entry for flash + promjet */ - disable_tlb(flash_esel); + if (flash_esel == -1) { + /* very unlikely unless something is messed up */ + puts("Error: Could not find TLB for FLASH BASE\n"); + flash_esel = 2; /* give our best effort to continue */ + } else { + /* invalidate existing TLB entry for flash + promjet */ + disable_tlb(flash_esel); + } set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, diff --git a/board/freescale/p1023rds/Makefile b/board/freescale/p1023rds/Makefile deleted file mode 100644 index fdbf365..0000000 --- a/board/freescale/p1023rds/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# Copyright 2010-2011 Freescale Semiconductor, Inc. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += p1023rds.o -obj-y += law.o -obj-y += tlb.o diff --git a/board/freescale/p1023rds/README b/board/freescale/p1023rds/README deleted file mode 100644 index d382551..0000000 --- a/board/freescale/p1023rds/README +++ /dev/null @@ -1,101 +0,0 @@ -Overview --------- -The P1023 process includes a performance optimized implementation of the -QorIQ data Path Acceleration Architecture (DPAA). This architecture -provides the infrastructure to support simplified sharing of networking -interfaces and accelerators by multiple CPU cores. P1023 is an e500 based -dual core SOC. - -P1023RDS board is a Low End Dual core platform supporting the P1023 -processor of QorIQ series. - -Building U-boot ---------------- -To build the u-boot for P1023RDS: -Configure to NOR boot: - make P1023RDS_config -Configure to NAND boot: - make P1023RDS_NAND_config -Build: - make - -Board Switches --------------- -Most switches on the board should not be changed. The most frequent -user-settable switches on the board are used to configure -the flash banks. - -J4: all open - -Default NOR flash boot switch setting: - Sw3[1:8]: off on on off on on off off - Sw4[1:8]: off off off on off off off off - Sw6[1:8]: off on off on off on on off - Sw7[1:8]: off on off off on off off off - Sw8[1:8]: on off off off off off off off - -For NAND flash boot,set -Sw4[1:4]: off on on on - -The default native ethernet setting is for RGMII mode. -To use SGMII mode, set -SW8[1:2]: OFF OFF -SW7[6:7]: ON ON - -Memory Map ----------- -0x0000_0000 0x7fff_ffff DDR 2G Cacheable -0x8000_0000 0xbfff_ffff PCI Express Mem 1G non-cacheable -0xc000_0000 0xdfff_ffff PCI 512M non-cacheable -0xe100_0000 0xe3ff_ffff PCI IO range 4M non-cacheable - -0xe000_0000 0xe003_ffff BCSR 256K BCSR -0xee00_0000 0xefff_ffff NOR flash 32M NOR flash -0xff00_0000 0xff3f_ffff DPAA_QBMAN 4M -0xff60_0000 0xff7f_ffff CCSR 2M non-cacheable -0xffa0_0000 0xffaf_ffff NAND FLASH 1M non-cacheable -0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 - -Flashing u-boot Images ---------------- -To program the image in the boot flash bank: -NOR flash boot: - => tftp 1000000 u-boot.bin - => protect off all - => erase eff40000 efffffff - => cp.b 1000000 eff40000 c0000 - -NAND flash boot: - => tftp 1000000 u-boot-nand.bin - => nand erase 0 80000 - => nand write 1000000 0 80000 - -Firmware ucode location ---------------------------------- -Microcode(ucode) to FMAN's IRAM is needed to make FMAN Ethernet work. -u-boot loads ucode FLASH. The location for ucode: -NOR Flash: 0xfe000000 -NAND Flash: 0x1f00000 - -Using the Device Tree Source File ---------------------------------- -To create the DTB (Device Tree Binary) image file, -use a command similar to this: - - dtc -b 0 -f -I dts -O dtb p1023rds.dts > p1023rds.dtb - -Likely, that .dts file will come from here; - - linux-2.6/arch/powerpc/boot/dts/p1023rds.dts -or - make p1023rds.dtb ARCH=powerpc -in linux-2.6 directory. - -Booting Linux -------------- -Place a linux uImage in the TFTP disk area. - - tftp 1000000 uImage - tftp 2000000 rootfs.ext2.gz.uboot - tftp c00000 p1023rds.dtb - bootm 1000000 2000000 c00000 diff --git a/board/freescale/p1023rds/bcsr.h b/board/freescale/p1023rds/bcsr.h deleted file mode 100644 index a9deb72..0000000 --- a/board/freescale/p1023rds/bcsr.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * Copyright (C) 2011 Freescale Semiconductor, Inc. - * - * Authors: Chunhe Lan <b25806@freescale.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __BCSR_H_ -#define __BCSR_H_ - -#include <common.h> - -/* - * BCSR Bit definitions - * BCSR 15 * - 0 device insertion oriention - 1 stack processor present - 2 power supply shut down/normal operation - 3 I2C bus0 drive enable - 4 reserved - 5:7 I2C bus0 select - 5 - I2C_BUS_0_SS0 - 6 - I2C_BUS_0_SS1 - 7 - I2C_BUS_0_SS2 -*/ - -/* BCSR register base address is 0xFX000020 */ -#define BCSR_BASE_REG_OFFSET 0x20 -#define BCSR_ACCESS_REG_ADDR (CONFIG_SYS_BCSR_BASE + BCSR_BASE_REG_OFFSET) - -#define BCSR15_DEV_INS_ORI 0x80 -#define BCSR15_STACK_PRO_PRE 0x40 -#define BCSR15_POWER_SUPPLY 0x20 -#define BCSR15_I2C_BUS0_EN 0x10 -#define BCSR15_I2C_BUS0_SEG0 0x00 -#define BCSR15_I2C_BUS0_SEG1 0x04 -#define BCSR15_I2C_BUS0_SEG2 0x02 -#define BCSR15_I2C_BUS0_SEG3 0x06 -#define BCSR15_I2C_BUS0_SEG4 0x01 -#define BCSR15_I2C_BUS0_SEG5 0x05 -#define BCSR15_I2C_BUS0_SEG6 0x03 -#define BCSR15_I2C_BUS0_SEG7 0x07 -#define BCSR15_I2C_BUS0_SEG_CLR 0x07 -#define BCSR19_SGMII_SEL_L 0x01 - -/*BCSR Utils functions*/ -void fixup_i2c_bus0_sel_seg0(void); -#endif /* __BCSR_H_ */ diff --git a/board/freescale/p1023rds/law.c b/board/freescale/p1023rds/law.c deleted file mode 100644 index 92f5a3f..0000000 --- a/board/freescale/p1023rds/law.c +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Copyright 2010-2011 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/fsl_law.h> -#include <asm/mmu.h> - -struct law_entry law_table[] = { - SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC), - SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_4M, - LAW_TRGT_IF_DPAA_SWP_SRAM), - /* The LAW 0xe0000000 ~ 0xefffffff for BCSR and NOR flash */ - SET_LAW(CONFIG_SYS_BCSR_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_LBC), -}; - -int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/p1023rds/p1023rds.c b/board/freescale/p1023rds/p1023rds.c deleted file mode 100644 index 2b883c7..0000000 --- a/board/freescale/p1023rds/p1023rds.c +++ /dev/null @@ -1,191 +0,0 @@ -/* - * Copyright 2010-2012 Freescale Semiconductor, Inc. - * - * Authors: Roy Zang <tie-fei.zang@freescale.com> - * Chunhe Lan <b25806@freescale.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <command.h> -#include <pci.h> -#include <asm/io.h> -#include <asm/cache.h> -#include <asm/processor.h> -#include <asm/mmu.h> -#include <asm/immap_85xx.h> -#include <asm/fsl_pci.h> -#include <fsl_ddr_sdram.h> -#include <asm/fsl_portals.h> -#include <libfdt.h> -#include <fdt_support.h> -#include <netdev.h> -#include <malloc.h> -#include <fm_eth.h> -#include <fsl_mdio.h> -#include <miiphy.h> -#include <phy.h> -#include <asm/fsl_dtsec.h> - -#include "bcsr.h" - -DECLARE_GLOBAL_DATA_PTR; - -int board_early_init_f(void) -{ - fsl_lbc_t *lbc = LBC_BASE_ADDR; - - /* Set ABSWP to implement conversion of addresses in the LBC */ - setbits_be32(&lbc->lbcr, CONFIG_SYS_LBC_LBCR); - - return 0; -} - -int checkboard(void) -{ - u8 *bcsr = (u8 *)BCSR_ACCESS_REG_ADDR; - - printf("Board: P1023 RDS\n"); - - clrbits_8(&bcsr[15], BCSR15_I2C_BUS0_SEG_CLR); - setbits_8(&bcsr[15], BCSR15_I2C_BUS0_SEG0); - - return 0; -} - -/* Fixed sdram init -- doesn't use serial presence detect. */ -phys_size_t fixed_sdram(void) -{ -#ifndef CONFIG_SYS_RAMBOOT - struct ccsr_ddr __iomem *ddr = - (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR; - - set_next_law(0, LAW_SIZE_2G, LAW_TRGT_IF_DDR_1); - - out_be32(&ddr->cs0_bnds, CONFIG_SYS_DDR_CS0_BNDS); - out_be32(&ddr->cs0_config, CONFIG_SYS_DDR_CS0_CONFIG); - out_be32(&ddr->cs1_bnds, CONFIG_SYS_DDR_CS1_BNDS); - out_be32(&ddr->cs1_config, CONFIG_SYS_DDR_CS1_CONFIG); - out_be32(&ddr->timing_cfg_3, CONFIG_SYS_DDR_TIMING_3); - out_be32(&ddr->timing_cfg_0, CONFIG_SYS_DDR_TIMING_0); - out_be32(&ddr->timing_cfg_1, CONFIG_SYS_DDR_TIMING_1); - out_be32(&ddr->timing_cfg_2, CONFIG_SYS_DDR_TIMING_2); - out_be32(&ddr->sdram_cfg_2, CONFIG_SYS_DDR_CONTROL2); - out_be32(&ddr->sdram_mode, CONFIG_SYS_DDR_MODE_1); - out_be32(&ddr->sdram_mode_2, CONFIG_SYS_DDR_MODE_2); - out_be32(&ddr->sdram_interval, CONFIG_SYS_DDR_INTERVAL); - out_be32(&ddr->sdram_data_init, CONFIG_SYS_DDR_DATA_INIT); - out_be32(&ddr->sdram_clk_cntl, CONFIG_SYS_DDR_CLK_CTRL); - out_be32(&ddr->timing_cfg_4, CONFIG_SYS_DDR_TIMING_4); - out_be32(&ddr->timing_cfg_5, CONFIG_SYS_DDR_TIMING_5); - out_be32(&ddr->ddr_zq_cntl, CONFIG_SYS_DDR_ZQ_CNTL); - out_be32(&ddr->ddr_wrlvl_cntl, CONFIG_SYS_DDR_WRLVL_CNTL); - out_be32(&ddr->ddr_cdr1, CONFIG_SYS_DDR_CDR_1); - out_be32(&ddr->ddr_cdr2, CONFIG_SYS_DDR_CDR_2); - out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_CONTROL); -#endif - return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024ul; -} - -#ifdef CONFIG_PCI -void pci_init_board(void) -{ - fsl_pcie_init_board(0); -} -#endif - -int board_early_init_r(void) -{ - const unsigned int flashbase = CONFIG_SYS_BCSR_BASE; - const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); - - /* - * Remap Boot flash + BCSR region to caching-inhibited - * so that flash can be erased properly. - */ - - /* Flush d-cache and invalidate i-cache of any FLASH data */ - flush_dcache(); - invalidate_icache(); - - /* invalidate existing TLB entry for flash + bcsr */ - disable_tlb(flash_esel); - - set_tlb(1, flashbase, CONFIG_SYS_BCSR_BASE_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, flash_esel, BOOKE_PAGESZ_256M, 1); - - setup_portals(); - - return 0; -} - -unsigned long get_board_sys_clk(ulong dummy) -{ - return gd->bus_clk; -} - -unsigned long get_board_ddr_clk(ulong dummy) -{ - return gd->mem_clk; -} - -int board_eth_init(bd_t *bis) -{ - u8 *bcsr = (u8 *)BCSR_ACCESS_REG_ADDR; - ccsr_gur_t *gur = (ccsr_gur_t *)CONFIG_SYS_MPC85xx_GUTS_ADDR; - struct fsl_pq_mdio_info dtsec_mdio_info; - - /* - * Need to set dTSEC 1 pin multiplexing to TSEC. The default setting - * is not correct. - */ - setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_TSEC1_1); - - dtsec_mdio_info.regs = - (struct tsec_mii_mng *)CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR; - dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME; - - /* Register the 1G MDIO bus */ - fsl_pq_mdio_init(bis, &dtsec_mdio_info); - - fm_info_set_phy_address(FM1_DTSEC1, CONFIG_SYS_FM1_DTSEC1_PHY_ADDR); - fm_info_set_phy_address(FM1_DTSEC2, CONFIG_SYS_FM1_DTSEC2_PHY_ADDR); - - fm_info_set_mdio(FM1_DTSEC1, - miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME)); - fm_info_set_mdio(FM1_DTSEC2, - miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME)); - - /* Make SERDES connected to SGMII by cleaing bcsr19[7] */ - if (fm_info_get_enet_if(FM1_DTSEC1) == PHY_INTERFACE_MODE_SGMII) - clrbits_8(&bcsr[19], BCSR19_SGMII_SEL_L); - -#ifdef CONFIG_FMAN_ENET - cpu_eth_init(bis); -#endif - - return pci_eth_init(bis); -} - -#if defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) -{ - phys_addr_t base; - phys_size_t size; - - ft_cpu_setup(blob, bd); - - base = getenv_bootm_low(); - size = getenv_bootm_size(); - - fdt_fixup_memory(blob, (u64)base, (u64)size); - -#ifdef CONFIG_HAS_FSL_DR_USB - fdt_fixup_dr_usb(blob, bd); -#endif - - fdt_fixup_fman_ethernet(blob); -} -#endif diff --git a/board/freescale/p1023rds/tlb.c b/board/freescale/p1023rds/tlb.c deleted file mode 100644 index 3c92c14..0000000 --- a/board/freescale/p1023rds/tlb.c +++ /dev/null @@ -1,100 +0,0 @@ -/* - * Copyright 2010-2011 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/mmu.h> - -struct fsl_e_tlb_entry tlb_table[] = { - /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, - CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, - CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, - CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - - /* TLB 1 */ - /* *I*** - Covers boot page */ - SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I, - 0, 0, BOOKE_PAGESZ_4K, 1), - - /* *I*G* - CCSRBAR */ - SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 1, BOOKE_PAGESZ_4M, 1), - - /* *W*G* - BCSR and NOR flash on local bus*/ - /* This will be changed to *I*G* after relocation to RAM. */ - SET_TLB_ENTRY(1, CONFIG_SYS_BCSR_BASE, CONFIG_SYS_BCSR_BASE_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_W|MAS2_G, - 0, 2, BOOKE_PAGESZ_256M, 1), - - /* *I*G* - PCI */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT, CONFIG_SYS_PCIE3_MEM_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 3, BOOKE_PAGESZ_1G, 1), - - /* *I*G* - PCI */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT + 0x40000000, - CONFIG_SYS_PCIE3_MEM_PHYS + 0x40000000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 4, BOOKE_PAGESZ_256M, 1), - - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT + 0x50000000, - CONFIG_SYS_PCIE3_MEM_PHYS + 0x50000000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 5, BOOKE_PAGESZ_256M, 1), - - /* *I*G* - PCI I/O */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_IO_VIRT, CONFIG_SYS_PCIE3_IO_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 6, BOOKE_PAGESZ_256K, 1), - - /* Bman/Qman */ - SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE, CONFIG_SYS_BMAN_MEM_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 7, BOOKE_PAGESZ_1M, 1), - SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE + 0x00100000, - CONFIG_SYS_BMAN_MEM_PHYS + 0x00100000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 8, BOOKE_PAGESZ_1M, 1), - SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE, CONFIG_SYS_QMAN_MEM_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M, - 0, 9, BOOKE_PAGESZ_1M, 1), - SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE + 0x00100000, - CONFIG_SYS_QMAN_MEM_PHYS + 0x00100000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 10, BOOKE_PAGESZ_1M, 1), - - /* *I*G - NAND */ - SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 11, BOOKE_PAGESZ_1M, 1), - -#ifdef CONFIG_SYS_RAMBOOT - SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, - CONFIG_SYS_DDR_SDRAM_BASE, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 12, BOOKE_PAGESZ_1G, 1), - - SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000, - CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 13, BOOKE_PAGESZ_1G, 1), -#endif -}; - -int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/freescale/p1_p2_rdb/p1_p2_rdb.c b/board/freescale/p1_p2_rdb/p1_p2_rdb.c index 3df557d..aba4f53 100644 --- a/board/freescale/p1_p2_rdb/p1_p2_rdb.c +++ b/board/freescale/p1_p2_rdb/p1_p2_rdb.c @@ -128,7 +128,7 @@ int misc_init_r(void) int board_early_init_r(void) { const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; - const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); + int flash_esel = find_tlb_idx((void *)flashbase, 1); volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); unsigned int orig_bus = i2c_get_bus_num(); u8 i2c_data; @@ -163,8 +163,14 @@ int board_early_init_r(void) flush_dcache(); invalidate_icache(); - /* invalidate existing TLB entry for flash */ - disable_tlb(flash_esel); + if (flash_esel == -1) { + /* very unlikely unless something is messed up */ + puts("Error: Could not find TLB for FLASH BASE\n"); + flash_esel = 2; /* give our best effort to continue */ + } else { + /* invalidate existing TLB entry for flash */ + disable_tlb(flash_esel); + } set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, diff --git a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c index 5f3d6fd..a6756c6 100644 --- a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c +++ b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c @@ -288,7 +288,7 @@ void pci_init_board(void) int board_early_init_r(void) { const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; - const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); + int flash_esel = find_tlb_idx((void *)flashbase, 1); /* * Remap Boot flash region to caching-inhibited @@ -299,8 +299,14 @@ int board_early_init_r(void) flush_dcache(); invalidate_icache(); - /* invalidate existing TLB entry for flash */ - disable_tlb(flash_esel); + if (flash_esel == -1) { + /* very unlikely unless something is messed up */ + puts("Error: Could not find TLB for FLASH BASE\n"); + flash_esel = 2; /* give our best effort to continue */ + } else { + /* invalidate existing TLB entry for flash */ + disable_tlb(flash_esel); + } set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, /* tlb, epn, rpn */ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,/* perms, wimge */ diff --git a/board/freescale/p1_twr/p1_twr.c b/board/freescale/p1_twr/p1_twr.c index 0e0d058..a0a416b 100644 --- a/board/freescale/p1_twr/p1_twr.c +++ b/board/freescale/p1_twr/p1_twr.c @@ -155,7 +155,7 @@ void pci_init_board(void) int board_early_init_r(void) { const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; - const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); + int flash_esel = find_tlb_idx((void *)flashbase, 1); /* * Remap Boot flash region to caching-inhibited @@ -166,8 +166,14 @@ int board_early_init_r(void) flush_dcache(); invalidate_icache(); - /* invalidate existing TLB entry for flash */ - disable_tlb(flash_esel); + if (flash_esel == -1) { + /* very unlikely unless something is messed up */ + puts("Error: Could not find TLB for FLASH BASE\n"); + flash_esel = 2; /* give our best effort to continue */ + } else { + /* invalidate existing TLB entry for flash */ + disable_tlb(flash_esel); + } set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, /* tlb, epn, rpn */ MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, /* perms, wimge */ diff --git a/board/freescale/p2020ds/p2020ds.c b/board/freescale/p2020ds/p2020ds.c index a0cf927..b72fcff 100644 --- a/board/freescale/p2020ds/p2020ds.c +++ b/board/freescale/p2020ds/p2020ds.c @@ -159,7 +159,7 @@ void pci_init_board(void) int board_early_init_r(void) { const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; - const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); + int flash_esel = find_tlb_idx((void *)flashbase, 1); /* * Remap Boot flash + PROMJET region to caching-inhibited @@ -170,8 +170,14 @@ int board_early_init_r(void) flush_dcache(); invalidate_icache(); - /* invalidate existing TLB entry for flash + promjet */ - disable_tlb(flash_esel); + if (flash_esel == -1) { + /* very unlikely unless something is messed up */ + puts("Error: Could not find TLB for FLASH BASE\n"); + flash_esel = 2; /* give our best effort to continue */ + } else { + /* invalidate existing TLB entry for flash + promjet */ + disable_tlb(flash_esel); + } set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, diff --git a/board/freescale/p2041rdb/p2041rdb.c b/board/freescale/p2041rdb/p2041rdb.c index 8554512..a14b43b 100644 --- a/board/freescale/p2041rdb/p2041rdb.c +++ b/board/freescale/p2041rdb/p2041rdb.c @@ -116,7 +116,7 @@ void board_config_lanes_mux(void) int board_early_init_r(void) { const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; - const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); + int flash_esel = find_tlb_idx((void *)flashbase, 1); /* * Remap Boot flash + PROMJET region to caching-inhibited @@ -127,8 +127,14 @@ int board_early_init_r(void) flush_dcache(); invalidate_icache(); - /* invalidate existing TLB entry for flash + promjet */ - disable_tlb(flash_esel); + if (flash_esel == -1) { + /* very unlikely unless something is messed up */ + puts("Error: Could not find TLB for FLASH BASE\n"); + flash_esel = 2; /* give our best effort to continue */ + } else { + /* invalidate existing TLB entry for flash + promjet */ + disable_tlb(flash_esel); + } set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, diff --git a/board/freescale/t1040qds/eth.c b/board/freescale/t1040qds/eth.c index 3077b4a..1929bba 100644 --- a/board/freescale/t1040qds/eth.c +++ b/board/freescale/t1040qds/eth.c @@ -355,7 +355,9 @@ static void set_brdcfg9_for_gtx_clk(void) { u8 brdcfg9; brdcfg9 = QIXIS_READ(brdcfg[9]); - brdcfg9 |= (1 << 5); +/* Initializing EPHY2 clock to RGMII mode */ + brdcfg9 &= ~(BRDCFG9_EPHY2_MASK); + brdcfg9 |= (BRDCFG9_EPHY2_VAL); QIXIS_WRITE(brdcfg[9], brdcfg9); } diff --git a/board/freescale/t1040qds/t1040qds.c b/board/freescale/t1040qds/t1040qds.c index 0e83d17..19af46e 100644 --- a/board/freescale/t1040qds/t1040qds.c +++ b/board/freescale/t1040qds/t1040qds.c @@ -119,7 +119,7 @@ int board_early_init_r(void) { #ifdef CONFIG_SYS_FLASH_BASE const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; - const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); + int flash_esel = find_tlb_idx((void *)flashbase, 1); /* * Remap Boot flash + PROMJET region to caching-inhibited @@ -130,8 +130,14 @@ int board_early_init_r(void) flush_dcache(); invalidate_icache(); - /* invalidate existing TLB entry for flash + promjet */ - disable_tlb(flash_esel); + if (flash_esel == -1) { + /* very unlikely unless something is messed up */ + puts("Error: Could not find TLB for FLASH BASE\n"); + flash_esel = 2; /* give our best effort to continue */ + } else { + /* invalidate existing TLB entry for flash + promjet */ + disable_tlb(flash_esel); + } set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, diff --git a/board/freescale/t1040qds/t1040qds_qixis.h b/board/freescale/t1040qds/t1040qds_qixis.h index 98d2d39..cef8ad0 100644 --- a/board/freescale/t1040qds/t1040qds_qixis.h +++ b/board/freescale/t1040qds/t1040qds_qixis.h @@ -17,6 +17,10 @@ #define BRDCFG5_IMX_MASK 0xC0 #define BRDCFG5_IMX_DIU 0x80 +/* BRDCFG9[2] controls EPHY2 Clock */ +#define BRDCFG9_EPHY2_MASK 0x20 +#define BRDCFG9_EPHY2_VAL 0x00 + /* BRDCFG15[3] controls LCD Panel Powerdown*/ #define BRDCFG15_LCDPD_MASK 0x10 #define BRDCFG15_LCDPD_ENABLED 0x00 diff --git a/board/freescale/t104xrdb/t104xrdb.c b/board/freescale/t104xrdb/t104xrdb.c index a5e5fff..ddb669f 100644 --- a/board/freescale/t104xrdb/t104xrdb.c +++ b/board/freescale/t104xrdb/t104xrdb.c @@ -48,7 +48,7 @@ int board_early_init_r(void) { #ifdef CONFIG_SYS_FLASH_BASE const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; - const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); + int flash_esel = find_tlb_idx((void *)flashbase, 1); /* * Remap Boot flash region to caching-inhibited @@ -59,8 +59,14 @@ int board_early_init_r(void) flush_dcache(); invalidate_icache(); - /* invalidate existing TLB entry for flash */ - disable_tlb(flash_esel); + if (flash_esel == -1) { + /* very unlikely unless something is messed up */ + puts("Error: Could not find TLB for FLASH BASE\n"); + flash_esel = 2; /* give our best effort to continue */ + } else { + /* invalidate existing TLB entry for flash */ + disable_tlb(flash_esel); + } set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, diff --git a/board/freescale/t208xqds/t208xqds.c b/board/freescale/t208xqds/t208xqds.c index 1353439..fc6d256 100644 --- a/board/freescale/t208xqds/t208xqds.c +++ b/board/freescale/t208xqds/t208xqds.c @@ -326,7 +326,7 @@ int brd_mux_lane_to_slot(void) int board_early_init_r(void) { const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; - const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); + int flash_esel = find_tlb_idx((void *)flashbase, 1); /* * Remap Boot flash + PROMJET region to caching-inhibited @@ -337,8 +337,14 @@ int board_early_init_r(void) flush_dcache(); invalidate_icache(); - /* invalidate existing TLB entry for flash + promjet */ - disable_tlb(flash_esel); + if (flash_esel == -1) { + /* very unlikely unless something is messed up */ + puts("Error: Could not find TLB for FLASH BASE\n"); + flash_esel = 2; /* give our best effort to continue */ + } else { + /* invalidate existing TLB entry for flash + promjet */ + disable_tlb(flash_esel); + } set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, diff --git a/board/freescale/t208xrdb/t208xrdb.c b/board/freescale/t208xrdb/t208xrdb.c index 265c1f9..be99fb8 100644 --- a/board/freescale/t208xrdb/t208xrdb.c +++ b/board/freescale/t208xrdb/t208xrdb.c @@ -58,7 +58,7 @@ int checkboard(void) int board_early_init_r(void) { const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; - const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); + int flash_esel = find_tlb_idx((void *)flashbase, 1); /* * Remap Boot flash + PROMJET region to caching-inhibited * so that flash can be erased properly. @@ -67,9 +67,14 @@ int board_early_init_r(void) /* Flush d-cache and invalidate i-cache of any FLASH data */ flush_dcache(); invalidate_icache(); - - /* invalidate existing TLB entry for flash + promjet */ - disable_tlb(flash_esel); + if (flash_esel == -1) { + /* very unlikely unless something is messed up */ + puts("Error: Could not find TLB for FLASH BASE\n"); + flash_esel = 2; /* give our best effort to continue */ + } else { + /* invalidate existing TLB entry for flash + promjet */ + disable_tlb(flash_esel); + } set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, diff --git a/board/freescale/t4qds/t4240emu.c b/board/freescale/t4qds/t4240emu.c index 7a61036..479e124 100644 --- a/board/freescale/t4qds/t4240emu.c +++ b/board/freescale/t4qds/t4240emu.c @@ -32,7 +32,7 @@ int checkboard(void) int board_early_init_r(void) { const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; - const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); + int flash_esel = find_tlb_idx((void *)flashbase, 1); /* * Remap Boot flash + PROMJET region to caching-inhibited @@ -43,8 +43,14 @@ int board_early_init_r(void) flush_dcache(); invalidate_icache(); - /* invalidate existing TLB entry for flash */ - disable_tlb(flash_esel); + if (flash_esel == -1) { + /* very unlikely unless something is messed up */ + puts("Error: Could not find TLB for FLASH BASE\n"); + flash_esel = 2; /* give our best effort to continue */ + } else { + /* invalidate existing TLB entry for flash */ + disable_tlb(flash_esel); + } set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, diff --git a/board/freescale/t4qds/t4240qds.c b/board/freescale/t4qds/t4240qds.c index fe1bc7f..6205fea 100644 --- a/board/freescale/t4qds/t4240qds.c +++ b/board/freescale/t4qds/t4240qds.c @@ -528,7 +528,7 @@ int config_backside_crossbar_mux(void) int board_early_init_r(void) { const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; - const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); + int flash_esel = find_tlb_idx((void *)flashbase, 1); /* * Remap Boot flash + PROMJET region to caching-inhibited @@ -539,8 +539,14 @@ int board_early_init_r(void) flush_dcache(); invalidate_icache(); - /* invalidate existing TLB entry for flash + promjet */ - disable_tlb(flash_esel); + if (flash_esel == -1) { + /* very unlikely unless something is messed up */ + puts("Error: Could not find TLB for FLASH BASE\n"); + flash_esel = 2; /* give our best effort to continue */ + } else { + /* invalidate existing TLB entry for flash + promjet */ + disable_tlb(flash_esel); + } set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, @@ -638,9 +644,10 @@ unsigned long get_board_ddr_clk(void) int misc_init_r(void) { u8 sw; - serdes_corenet_t *srds_regs = - (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR; + void *srds_base = (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR; + serdes_corenet_t *srds_regs; u32 actual[MAX_SERDES]; + u32 pllcr0, expected; unsigned int i; sw = QIXIS_READ(brdcfg[2]); @@ -663,8 +670,9 @@ int misc_init_r(void) } for (i = 0; i < MAX_SERDES; i++) { - u32 pllcr0 = srds_regs->bank[i].pllcr0; - u32 expected = pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK; + srds_regs = srds_base + i * 0x1000; + pllcr0 = srds_regs->bank[0].pllcr0; + expected = pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK; if (expected != actual[i]) { printf("Warning: SERDES%u expects reference clock %sMHz, but actual is %sMHz\n", i + 1, serdes_clock_to_string(expected), diff --git a/board/freescale/t4rdb/t4240rdb.c b/board/freescale/t4rdb/t4240rdb.c index 5448c86..afef7e9 100644 --- a/board/freescale/t4rdb/t4240rdb.c +++ b/board/freescale/t4rdb/t4240rdb.c @@ -39,7 +39,7 @@ int checkboard(void) int board_early_init_r(void) { const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; - const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); + int flash_esel = find_tlb_idx((void *)flashbase, 1); /* * Remap Boot flash + PROMJET region to caching-inhibited @@ -50,8 +50,14 @@ int board_early_init_r(void) flush_dcache(); invalidate_icache(); - /* invalidate existing TLB entry for flash + promjet */ - disable_tlb(flash_esel); + if (flash_esel == -1) { + /* very unlikely unless something is messed up */ + puts("Error: Could not find TLB for FLASH BASE\n"); + flash_esel = 2; /* give our best effort to continue */ + } else { + /* invalidate existing TLB entry for flash + promjet */ + disable_tlb(flash_esel); + } set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, @@ -837,7 +837,6 @@ Active powerpc mpc85xx - freescale p1022ds Active powerpc mpc85xx - freescale p1022ds P1022DS_SDCARD P1022DS:SDCARD Timur Tabi <timur@freescale.com> Active powerpc mpc85xx - freescale p1022ds P1022DS_SPIFLASH P1022DS:SPIFLASH Timur Tabi <timur@freescale.com> Active powerpc mpc85xx - freescale p1023rdb P1023RDB - - -Active powerpc mpc85xx - freescale p1023rds P1023RDS - Roy Zang <tie-fei.zang@freescale.com> Active powerpc mpc85xx - freescale p1_p2_rdb P1011RDB P1_P2_RDB:P1011RDB - Active powerpc mpc85xx - freescale p1_p2_rdb P1011RDB_36BIT P1_P2_RDB:P1011RDB,36BIT - Active powerpc mpc85xx - freescale p1_p2_rdb P1011RDB_36BIT_SDCARD P1_P2_RDB:P1011RDB,36BIT,SDCARD - diff --git a/drivers/bootcount/bootcount.c b/drivers/bootcount/bootcount.c index 3ad4413..e0343f7 100644 --- a/drivers/bootcount/bootcount.c +++ b/drivers/bootcount/bootcount.c @@ -36,7 +36,7 @@ #endif /* defined(CONFIG_MPC8260) */ #if defined(CONFIG_QE) -#include <asm/immap_qe.h> +#include <linux/immap_qe.h> #define CONFIG_SYS_BOOTCOUNT_ADDR (CONFIG_SYS_IMMR + 0x110000 + \ QE_MURAM_SIZE - 2 * sizeof(u32)) diff --git a/drivers/ddr/fsl/ctrl_regs.c b/drivers/ddr/fsl/ctrl_regs.c index dcf6287..04e4178 100644 --- a/drivers/ddr/fsl/ctrl_regs.c +++ b/drivers/ddr/fsl/ctrl_regs.c @@ -1857,6 +1857,9 @@ static void set_timing_cfg_8(fsl_ddr_cfg_regs_t *ddr, acttoact_bg = picos_to_mclk(common_dimm->trrdl_ps); wrtord_bg = max(4, picos_to_mclk(7500)); + if (popts->otf_burst_chop_en) + wrtord_bg += 2; + pre_all_rec = 0; ddr->timing_cfg_8 = (0 diff --git a/drivers/ddr/fsl/fsl_ddr_gen4.c b/drivers/ddr/fsl/fsl_ddr_gen4.c index 7cd878a..bfc76b3 100644 --- a/drivers/ddr/fsl/fsl_ddr_gen4.c +++ b/drivers/ddr/fsl/fsl_ddr_gen4.c @@ -8,6 +8,7 @@ #include <asm/io.h> #include <fsl_ddr_sdram.h> #include <asm/processor.h> +#include <fsl_immap.h> #include <fsl_ddr.h> #if (CONFIG_CHIP_SELECTS_PER_CTRL > 4) @@ -183,12 +184,14 @@ step2: * we choose the max, that is 500 us for all of case. */ udelay(500); - asm volatile("sync;isync"); + mb(); + isb(); /* Let the controller go */ temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI; ddr_out32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN); - asm volatile("sync;isync"); + mb(); + isb(); total_gb_size_per_controller = 0; for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c index be5a16a..8b453cb 100644 --- a/drivers/mtd/nand/fsl_ifc_nand.c +++ b/drivers/mtd/nand/fsl_ifc_nand.c @@ -19,8 +19,11 @@ #include <asm/errno.h> #include <fsl_ifc.h> -#define FSL_IFC_V1_1_0 0x01010000 -#define MAX_BANKS 4 +#ifndef CONFIG_SYS_FSL_IFC_BANK_COUNT +#define CONFIG_SYS_FSL_IFC_BANK_COUNT 4 +#endif + +#define MAX_BANKS CONFIG_SYS_FSL_IFC_BANK_COUNT #define ERR_BYTE 0xFF /* Value returned for read bytes when read failed */ #define IFC_TIMEOUT_MSECS 10 /* Maximum number of mSecs to wait for IFC @@ -802,12 +805,30 @@ static void fsl_ifc_select_chip(struct mtd_info *mtd, int chip) { } -static void fsl_ifc_sram_init(void) +static int fsl_ifc_sram_init(uint32_t ver) { struct fsl_ifc *ifc = ifc_ctrl->regs; uint32_t cs = 0, csor = 0, csor_8k = 0, csor_ext = 0; + uint32_t ncfgr = 0; long long end_tick; + if (ver > FSL_IFC_V1_1_0) { + ncfgr = ifc_in32(&ifc->ifc_nand.ncfgr); + ifc_out32(&ifc->ifc_nand.ncfgr, ncfgr | IFC_NAND_SRAM_INIT_EN); + + /* wait for SRAM_INIT bit to be clear or timeout */ + end_tick = usec2ticks(IFC_TIMEOUT_MSECS * 1000) + get_ticks(); + while (end_tick > get_ticks()) { + ifc_ctrl->status = + ifc_in32(&ifc->ifc_nand.nand_evter_stat); + + if (!(ifc_ctrl->status & IFC_NAND_SRAM_INIT_EN)) + return 0; + } + printf("fsl-ifc: Failed to Initialise SRAM\n"); + return 1; + } + cs = ifc_ctrl->cs_nand >> IFC_NAND_CSEL_SHIFT; /* Save CSOR and CSOR_ext */ @@ -850,11 +871,18 @@ static void fsl_ifc_sram_init(void) break; } + if (ifc_ctrl->status != IFC_NAND_EVTER_STAT_OPC) { + printf("fsl-ifc: Failed to Initialise SRAM\n"); + return 1; + } + ifc_out32(&ifc->ifc_nand.nand_evter_stat, ifc_ctrl->status); /* Restore CSOR and CSOR_ext */ ifc_out32(&ifc_ctrl->regs->csor_cs[cs].csor, csor); ifc_out32(&ifc_ctrl->regs->csor_cs[cs].csor_ext, csor_ext); + + return 0; } static int fsl_ifc_chip_init(int devnum, u8 *addr) @@ -864,7 +892,7 @@ static int fsl_ifc_chip_init(int devnum, u8 *addr) struct fsl_ifc_mtd *priv; struct nand_ecclayout *layout; uint32_t cspr = 0, csor = 0, ver = 0; - int ret; + int ret = 0; if (!ifc_ctrl) { fsl_ifc_ctrl_init(); @@ -1006,8 +1034,13 @@ static int fsl_ifc_chip_init(int devnum, u8 *addr) } ver = ifc_in32(&ifc_ctrl->regs->ifc_rev); - if (ver == FSL_IFC_V1_1_0) - fsl_ifc_sram_init(); + if (ver >= FSL_IFC_V1_1_0) + ret = fsl_ifc_sram_init(ver); + if (ret) + return ret; + + if (ver >= FSL_IFC_V2_0_0) + priv->bufnum_mask = (priv->bufnum_mask * 2) + 1; ret = nand_scan_ident(mtd, 1, NULL); if (ret) diff --git a/drivers/mtd/nand/fsl_ifc_spl.c b/drivers/mtd/nand/fsl_ifc_spl.c index 5100772..e336cb1 100644 --- a/drivers/mtd/nand/fsl_ifc_spl.c +++ b/drivers/mtd/nand/fsl_ifc_spl.c @@ -97,7 +97,7 @@ int nand_spl_load_image(uint32_t offs, unsigned int uboot_size, void *vdst) int pages_per_blk; int blk_size; int bad_marker = 0; - int bufnum_mask, bufnum; + int bufnum_mask, bufnum, ver = 0; int csor, cspr; int pos = 0; @@ -130,6 +130,10 @@ int nand_spl_load_image(uint32_t offs, unsigned int uboot_size, void *vdst) bad_marker = 5; } + ver = ifc_in32(&ifc->ifc_rev); + if (ver >= FSL_IFC_V2_0_0) + bufnum_mask = (bufnum_mask * 2) + 1; + pages_per_blk = 32 << ((csor & CSOR_NAND_PB_MASK) >> CSOR_NAND_PB_SHIFT); diff --git a/drivers/net/fm/fm.h b/drivers/net/fm/fm.h index 43de114..316e06e 100644 --- a/drivers/net/fm/fm.h +++ b/drivers/net/fm/fm.h @@ -143,6 +143,7 @@ struct fm_eth { #define MAX_RXBUF_LOG2 11 #define MAX_RXBUF_LEN (1 << MAX_RXBUF_LOG2) -#define PORT_IS_ENABLED(port) fm_info[fm_port_to_index(port)].enabled +#define PORT_IS_ENABLED(port) (fm_port_to_index(port) == -1 ? \ + 0 : fm_info[fm_port_to_index(port)].enabled) #endif /* __FM_H__ */ diff --git a/drivers/net/fm/init.c b/drivers/net/fm/init.c index cd787f4..ff04695 100644 --- a/drivers/net/fm/init.c +++ b/drivers/net/fm/init.c @@ -147,6 +147,9 @@ void fm_disable_port(enum fm_port port) { int i = fm_port_to_index(port); + if (i == -1) + return; + fm_info[i].enabled = 0; fman_disable_port(port); } @@ -155,6 +158,9 @@ void fm_enable_port(enum fm_port port) { int i = fm_port_to_index(port); + if (i == -1) + return; + fm_info[i].enabled = 1; fman_enable_port(port); } diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c index 3a41b0e..231b075 100644 --- a/drivers/pci/fsl_pci_init.c +++ b/drivers/pci/fsl_pci_init.c @@ -504,8 +504,14 @@ void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info) } #endif if (!enabled) { - /* Let the user know there's no PCIe link */ - printf("no link, regs @ 0x%lx\n", pci_info->regs); + /* Let the user know there's no PCIe link for root + * complex. for endpoint, the link may not setup, so + * print undetermined. + */ + if (fsl_is_pci_agent(hose)) + printf("undetermined, regs @ 0x%lx\n", pci_info->regs); + else + printf("no link, regs @ 0x%lx\n", pci_info->regs); hose->last_busno = hose->first_busno; return; } diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c index 9c5fbd1..be09a17 100644 --- a/drivers/qe/qe.c +++ b/drivers/qe/qe.c @@ -11,7 +11,7 @@ #include <command.h> #include "asm/errno.h" #include "asm/io.h" -#include "asm/immap_qe.h" +#include "linux/immap_qe.h" #include "qe.h" #define MPC85xx_DEVDISR_QE_DISABLE 0x1 diff --git a/drivers/qe/uccf.c b/drivers/qe/uccf.c index 593d96d..85386bf 100644 --- a/drivers/qe/uccf.c +++ b/drivers/qe/uccf.c @@ -11,7 +11,7 @@ #include "malloc.h" #include "asm/errno.h" #include "asm/io.h" -#include "asm/immap_qe.h" +#include "linux/immap_qe.h" #include "qe.h" #include "uccf.h" diff --git a/drivers/qe/uccf.h b/drivers/qe/uccf.h index 0b57e2f..55941e4 100644 --- a/drivers/qe/uccf.h +++ b/drivers/qe/uccf.h @@ -12,7 +12,7 @@ #include "common.h" #include "qe.h" -#include "asm/immap_qe.h" +#include "linux/immap_qe.h" /* Fast or Giga ethernet */ diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c index 6804573..c91f084 100644 --- a/drivers/qe/uec.c +++ b/drivers/qe/uec.c @@ -11,7 +11,7 @@ #include "malloc.h" #include "asm/errno.h" #include "asm/io.h" -#include "asm/immap_qe.h" +#include "linux/immap_qe.h" #include "qe.h" #include "uccf.h" #include "uec.h" diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c index 5dc4641..e701787 100644 --- a/drivers/qe/uec_phy.c +++ b/drivers/qe/uec_phy.c @@ -14,7 +14,7 @@ #include "net.h" #include "malloc.h" #include "asm/errno.h" -#include "asm/immap_qe.h" +#include "linux/immap_qe.h" #include "asm/io.h" #include "qe.h" #include "uccf.h" diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h index 1af9ba6..43c9df0 100644 --- a/include/configs/B4860QDS.h +++ b/include/configs/B4860QDS.h @@ -340,7 +340,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ FTIM1_GPCM_TRAD(0x1f)) #define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ - FTIM2_GPCM_TCH(0x0) | \ + FTIM2_GPCM_TCH(0x8) | \ FTIM2_GPCM_TWP(0x1f)) #define CONFIG_SYS_CS3_FTIM3 0x0 diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h index 7bb5d33..49c16af 100644 --- a/include/configs/BSC9132QDS.h +++ b/include/configs/BSC9132QDS.h @@ -354,7 +354,7 @@ combinations. this should be removed later #define CONFIG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ FTIM1_GPCM_TRAD(0x1f)) #define CONFIG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ - FTIM2_GPCM_TCH(0x0) | \ + FTIM2_GPCM_TCH(0x8) | \ FTIM2_GPCM_TWP(0x1f)) #define CONFIG_SYS_CS2_FTIM3 0x0 #endif diff --git a/include/configs/C29XPCIE.h b/include/configs/C29XPCIE.h index 9e12fac..0dd1560 100644 --- a/include/configs/C29XPCIE.h +++ b/include/configs/C29XPCIE.h @@ -319,7 +319,7 @@ #define CONFIG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ FTIM1_GPCM_TRAD(0x1f)) #define CONFIG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ - FTIM2_GPCM_TCH(0x0) | \ + FTIM2_GPCM_TCH(0x8) | \ FTIM2_GPCM_TWP(0x1f)) #define CONFIG_SYS_CS2_FTIM3 0x0 diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index d612a8b..50529bf 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -537,7 +537,7 @@ extern unsigned long get_sdram_size(void); #define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ FTIM1_GPCM_TRAD(0x1f)) #define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ - FTIM2_GPCM_TCH(0x0) | \ + FTIM2_GPCM_TCH(0x8) | \ FTIM2_GPCM_TWP(0x1f)) #define CONFIG_SYS_CS3_FTIM3 0x0 diff --git a/include/configs/P1023RDS.h b/include/configs/P1023RDS.h deleted file mode 100644 index ac75b9c..0000000 --- a/include/configs/P1023RDS.h +++ /dev/null @@ -1,479 +0,0 @@ -/* - * Copyright 2010-2012 Freescale Semiconductor, Inc. - * - * Authors: Roy Zang <tie-fei.zang@freescale.com> - * Chunhe Lan <b25806@freescale.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * p1023rds board configuration file - * - */ -#ifndef __CONFIG_H -#define __CONFIG_H - -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xeff40000 -#endif - -#ifndef CONFIG_SYS_MONITOR_BASE -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ -#endif - -#ifndef CONFIG_RESET_VECTOR_ADDRESS -#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc -#endif - -/* High Level Configuration Options */ -#define CONFIG_BOOKE /* BOOKE */ -#define CONFIG_E500 /* BOOKE e500 family */ -#define CONFIG_P1023 -#define CONFIG_P1023RDS -#define CONFIG_MP /* support multiple processors */ - -#define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */ -#define CONFIG_PCI /* Enable PCI/PCIE */ -#define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ -#define CONFIG_PCIE2 /* PCIE controler 2 (slot 2) */ -#define CONFIG_PCIE3 /* PCIE controler 3 (slot 3) */ -#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ -#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ -#define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ -#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ -#define CONFIG_FSL_LAW /* Use common FSL init code */ - -#ifndef __ASSEMBLY__ -extern unsigned long get_clock_freq(void); -#endif - -#define CONFIG_SYS_CLK_FREQ 66666666 -#define CONFIG_DDR_CLK_FREQ CONFIG_SYS_CLK_FREQ - -/* - * These can be toggled for performance analysis, otherwise use default. - */ -#define CONFIG_L2_CACHE /* toggle L2 cache */ -#define CONFIG_BTB /* toggle branch predition */ -#define CONFIG_HWCONFIG - -#define CONFIG_ENABLE_36BIT_PHYS - -#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x1fffffff /* fix me, only 1G */ -#define CONFIG_PANIC_HANG /* do not reset board on panic */ - -#define CONFIG_SYS_LBC_LBCR 0x00000000 /* Implement conversion of - addresses in the LBC */ - -/* DDR Setup */ -#define CONFIG_VERY_BIG_RAM - -#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER -#define CONFIG_MEM_INIT_VALUE 0xDeadBeef - -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE - -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL 2 - -/* These are used when DDR doesn't use SPD. */ -#define CONFIG_SYS_SDRAM_SIZE 2048u /* DDR is 2GB */ - -/* Default settings for "stable" mode */ -#define CONFIG_SYS_DDR_CS0_BNDS 0x0000003F -#define CONFIG_SYS_DDR_CS1_BNDS 0x0040007F -#define CONFIG_SYS_DDR_CS0_CONFIG 0x80014302 -#define CONFIG_SYS_DDR_CS1_CONFIG 0x80014302 -#define CONFIG_SYS_DDR_TIMING_3 0x00020000 -#define CONFIG_SYS_DDR_TIMING_0 0x40110104 -#define CONFIG_SYS_DDR_TIMING_1 0x5C59E544 -#define CONFIG_SYS_DDR_TIMING_2 0x0fA888CA -#define CONFIG_SYS_DDR_MODE_1 0x00441210 -#define CONFIG_SYS_DDR_MODE_2 0x00000000 -#define CONFIG_SYS_DDR_MODE_CTRL 0x00000000 -#define CONFIG_SYS_DDR_INTERVAL 0x0A280100 -#define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef -#define CONFIG_SYS_DDR_CLK_CTRL 0x01800000 -#define CONFIG_SYS_DDR_TIMING_4 0x00000001 -#define CONFIG_SYS_DDR_TIMING_5 0x01401400 -#define CONFIG_SYS_DDR_ZQ_CNTL 0x89080600 -#define CONFIG_SYS_DDR_WRLVL_CNTL 0x8675F605 -#define CONFIG_SYS_DDR_CONTROL 0xC70C0008 /* Type = DDR3: No Interleaving */ -#define CONFIG_SYS_DDR_CONTROL2 0x24401010 -#define CONFIG_SYS_DDR_CDR1 0x00000000 -#define CONFIG_SYS_DDR_CDR2 0x00000000 - -#define CONFIG_SYS_DDR_ERR_INT_EN 0x00000000 -#define CONFIG_SYS_DDR_ERR_DIS 0x00000000 -#define CONFIG_SYS_DDR_SBE 0x00000000 - -/* Settings that differ for "performance" mode */ -#define CONFIG_SYS_DDR_CS0_BNDS_PERF 0x0000007F /* Interleaving Enabled */ -#define CONFIG_SYS_DDR_CS1_BNDS_PERF 0x00000000 /* Interleaving Enabled */ -#define CONFIG_SYS_DDR_CS1_CONFIG_PERF 0x80014302 -#define CONFIG_SYS_DDR_TIMING_1_PERF 0x5C58E544 -#define CONFIG_SYS_DDR_TIMING_2_PERF 0x0FA888CA -/* Type = DDR3: cs0-cs1 interleaving */ -#define CONFIG_SYS_DDR_CONTROL_PERF 0xC70C4008 -#define CONFIG_SYS_DDR_CDR_1 0x00000000 -#define CONFIG_SYS_DDR_CDR_2 0x00000000 - - -/* - * Memory map - * - * 0x0000_0000 0x7fff_ffff DDR 2G Cacheable - * 0x8000_0000 0xbfff_ffff PCI Express Mem 1G non-cacheable - * 0xc000_0000 0xdfff_ffff PCI 512M non-cacheable - * 0xe100_0000 0xe3ff_ffff PCI IO range 4M non-cacheable - * - * Localbus non-cacheable - * 0xe000_0000 0xe003_ffff BCSR 256K BCSR - * 0xee00_0000 0xefff_ffff NOR flash 32M NOR flash - * 0xff00_0000 0xff3f_ffff DPAA_QBMAN 4M - * 0xff60_0000 0xff7f_ffff CCSR 2M non-cacheable - * 0xffa0_0000 0xffaf_ffff NAND 1M non-cacheable - * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 - */ - -/* - * Local Bus Definitions - */ -#define CONFIG_SYS_BCSR_BASE 0xe0000000 /* start of on board FPGA */ -#define CONFIG_SYS_BCSR_BASE_PHYS CONFIG_SYS_BCSR_BASE - -#define CONFIG_SYS_FLASH_BASE 0xee000000 /* start of FLASH 32M */ - -#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE - -#define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \ - | BR_PS_16 | BR_V) -#define CONFIG_FLASH_OR_PRELIM 0xfe000ff7 - -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_FLASH_EMPTY_INFO - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 /* sectors per device */ -#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ - -#if defined(CONFIG_SYS_SPL) -#define CONFIG_SYS_RAMBOOT -#endif - -#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f function */ -#define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ - -#define CONFIG_SYS_INIT_RAM_LOCK -#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ -#define CONFIG_SYS_INIT_RAM_END 0x00004000 /* End of used area in RAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_END - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_LEN (768 * 1024) -#define CONFIG_SYS_MALLOC_LEN (6 * 1024 * 1024) /* Reserved for malloc */ - -#ifndef CONFIG_NAND_SPL -#define CONFIG_SYS_NAND_BASE 0xffa00000 -#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE -#else -#define CONFIG_SYS_NAND_BASE 0xfff00000 -#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE -#endif - -#define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE} -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE -#define CONFIG_CMD_NAND -#define CONFIG_NAND_FSL_ELBC -#define CONFIG_SYS_NAND_BLOCK_SIZE (16 * 1024) - -/* NAND boot: 4K NAND loader config */ -#define CONFIG_SYS_NAND_SPL_SIZE 0x1000 -#define CONFIG_SYS_NAND_U_BOOT_SIZE ((768 << 10) + CONFIG_SYS_NAND_SPL_SIZE) -#define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000 - CONFIG_SYS_NAND_SPL_SIZE) -#define CONFIG_SYS_NAND_U_BOOT_START 0x11000000 -#define CONFIG_SYS_NAND_U_BOOT_OFFS (0) -#define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000 -#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000) - -/* NAND flash config */ -#define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ - | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ - | BR_PS_8 /* Port Size = 8bit */ \ - | BR_MS_FCM /* MSEL = FCM */ \ - | BR_V) /* valid */ -#define CONFIG_SYS_NAND_OR_PRELIM (0xFFF80000 /* length 32K */ \ - | OR_FCM_CSCT \ - | OR_FCM_CST \ - | OR_FCM_CHT \ - | OR_FCM_SCY_1 \ - | OR_FCM_TRLX \ - | OR_FCM_EHTR) - -#define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ -#define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ -/* chip select 1 - BCSR */ -#define CONFIG_SYS_BR1_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_BCSR_BASE_PHYS) \ - | BR_MS_GPCM | BR_PS_8 | BR_V) -#define CONFIG_SYS_OR1_PRELIM (OR_AM_32KB | OR_GPCM_CSNT | OR_GPCM_XACS \ - | OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR \ - | OR_GPCM_EAD) - -/* Serial Port - * open - index 2 - * shorted - index 1 - */ -#define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) -#ifdef CONFIG_NAND_SPL -#define CONFIG_NS16550_MIN_FUNCTIONS -#endif - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x4500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR + 0x4600) - -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - -/* - * Pass open firmware flat tree - */ -#define CONFIG_OF_LIBFDT -#define CONFIG_OF_BOARD_SETUP -#define CONFIG_OF_STDOUT_VIA_ALIAS - -/* new uImage format support */ -#define CONFIG_FIT -#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ - -/* I2C */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_FSL -#define CONFIG_SYS_FSL_I2C_SPEED 400000 -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 -#define CONFIG_SYS_FSL_I2C2_SPEED 400000 -#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x51 - -/* - * I2C2 EEPROM - */ -#define CONFIG_ID_EEPROM -#ifdef CONFIG_ID_EEPROM -#define CONFIG_SYS_I2C_EEPROM_NXID -#endif -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x51 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_BUS_NUM 0 - -#define CONFIG_CMD_I2C - -/* - * eSPI - Enhanced SPI - */ -#define CONFIG_SPI_FLASH -#define CONFIG_SPI_FLASH_ATMEL - -#define CONFIG_HARD_SPI -#define CONFIG_FSL_ESPI - -#define CONFIG_CMD_SF -#define CONFIG_SF_DEFAULT_SPEED 10000000 -#define CONFIG_SF_DEFAULT_MODE 0 - -/* - * General PCI - * Memory space is mapped 1-1, but I/O space must start from 0. - */ - -/* controller 3, Slot 1, tgtid 3, Base address b000 */ -#define CONFIG_SYS_PCIE3_NAME "Slot 3" -#define CONFIG_SYS_PCIE3_MEM_VIRT 0x80000000 -#define CONFIG_SYS_PCIE3_MEM_BUS 0x80000000 -#define CONFIG_SYS_PCIE3_MEM_PHYS 0x80000000 -#define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCIE3_IO_VIRT 0xffc00000 -#define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 -#define CONFIG_SYS_PCIE3_IO_PHYS 0xffc00000 -#define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ - -/* controller 2, direct to uli, tgtid 2, Base address 9000 */ -#define CONFIG_SYS_PCIE2_NAME "Slot 2" -#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 -#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 -#define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 -#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000 -#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 -#define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000 -#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ - -/* controller 1, Slot 2, tgtid 1, Base address a000 */ -#define CONFIG_SYS_PCIE1_NAME "Slot 1" -#define CONFIG_SYS_PCIE1_MEM_VIRT 0xc0000000 -#define CONFIG_SYS_PCIE1_MEM_BUS 0xc0000000 -#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc0000000 -#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCIE1_IO_VIRT 0xffc20000 -#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 -#define CONFIG_SYS_PCIE1_IO_PHYS 0xffc20000 -#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ - -#if defined(CONFIG_PCI) -#define CONFIG_E1000 /* Defind e1000 pci Ethernet card */ -#define CONFIG_PCI_PNP /* do pci plug-and-play */ -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ -#endif /* CONFIG_PCI */ - -/* - * Environment - */ -#define CONFIG_ENV_OVERWRITE - -#if defined(CONFIG_SYS_RAMBOOT) -#define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x4000) -#define CONFIG_ENV_SIZE 0x2000 -#else -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ -#endif - -#define CONFIG_LOADS_ECHO /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_PING -#define CONFIG_CMD_MII -#define CONFIG_CMD_ELF -#define CONFIG_CMD_SETEXPR -#define CONFIG_CMD_REGINFO - -#if defined(CONFIG_PCI) -#define CONFIG_CMD_PCI -#define CONFIG_CMD_NET -#endif - -/* - * USB - */ -#define CONFIG_HAS_FSL_DR_USB -#ifdef CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI - -#ifdef CONFIG_USB_EHCI -#define CONFIG_CMD_USB -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_USB_EHCI_FSL -#define CONFIG_USB_STORAGE -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_DOS_PARTITION -#endif -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -/* - * For booting Linux, the board info and command line data - * have to be in the first 16 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ -#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#endif - -/* - * Environment Configuration - */ -#define CONFIG_BOOTFILE "uImage" -#define CONFIG_UBOOTPATH (u-boot.bin) /* U-Boot image on TFTP server */ - -/* default location for tftp and bootm */ -#define CONFIG_LOADADDR 1000000 - -#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ - -#define CONFIG_BAUDRATE 115200 - -/* Qman/Bman */ -#define CONFIG_SYS_DPAA_QBMAN /* support Q/Bman */ -#define CONFIG_SYS_QMAN_MEM_BASE 0xff000000 -#define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE -#define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000 -#define CONFIG_SYS_BMAN_MEM_BASE 0xff200000 -#define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE -#define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000 - -/* For FM */ -#define CONFIG_SYS_DPAA_FMAN -#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ - -#ifdef CONFIG_SYS_DPAA_FMAN -#define CONFIG_FMAN_ENET -#define CONFIG_PHY_MARVELL -#endif - -/* Default address of microcode for the Linux Fman driver */ -/* QE microcode/firmware address */ -#define CONFIG_SYS_QE_FMAN_FW_IN_NOR -#define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 -#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 -#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) - -#ifdef CONFIG_FMAN_ENET -#define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR 0x2 -#define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR 0x7 - -#define CONFIG_SYS_TBIPA_VALUE 8 -#define CONFIG_MII /* MII PHY management */ -#define CONFIG_ETHPRIME "FM1@DTSEC1" -#endif - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0" - -#endif /* __CONFIG_H */ diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h index f2a75ae..ebee89a 100644 --- a/include/configs/T1040QDS.h +++ b/include/configs/T1040QDS.h @@ -445,11 +445,17 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_FSL /* Use FSL common I2C driver */ #define CONFIG_SYS_FSL_I2C_SPEED 50000 /* I2C speed in Hz */ +#define CONFIG_SYS_FSL_I2C2_SPEED 50000 +#define CONFIG_SYS_FSL_I2C3_SPEED 50000 +#define CONFIG_SYS_FSL_I2C4_SPEED 50000 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C2_SPEED 50000 /* I2C speed in Hz */ #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C3_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C4_SLAVE 0x7F #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 -#define CONFIG_SYS_FSL_I2C2_OFFSET 0x119000 +#define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 +#define CONFIG_SYS_FSL_I2C3_OFFSET 0x119000 +#define CONFIG_SYS_FSL_I2C4_OFFSET 0x119100 #define I2C_MUX_PCA_ADDR 0x77 #define I2C_MUX_PCA_ADDR_PRI 0x77 /* Primary Mux*/ diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index 8d6c51b..c96f03c 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -286,7 +286,7 @@ #define CONFIG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ FTIM1_GPCM_TRAD(0x1f)) #define CONFIG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ - FTIM2_GPCM_TCH(0x0) | \ + FTIM2_GPCM_TCH(0x8) | \ FTIM2_GPCM_TWP(0x1f)) #define CONFIG_SYS_CS2_FTIM3 0x0 @@ -443,11 +443,17 @@ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_FSL /* Use FSL common I2C driver */ #define CONFIG_SYS_FSL_I2C_SPEED 400000 /* I2C speed in Hz */ +#define CONFIG_SYS_FSL_I2C2_SPEED 400000 +#define CONFIG_SYS_FSL_I2C3_SPEED 400000 +#define CONFIG_SYS_FSL_I2C4_SPEED 400000 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C2_SPEED 400000 /* I2C speed in Hz */ #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C3_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C4_SLAVE 0x7F #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 -#define CONFIG_SYS_FSL_I2C2_OFFSET 0x119000 +#define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 +#define CONFIG_SYS_FSL_I2C3_OFFSET 0x119000 +#define CONFIG_SYS_FSL_I2C4_OFFSET 0x119100 /* I2C bus multiplexer */ #define I2C_MUX_PCA_ADDR 0x70 diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h index 59d142e..784310a 100644 --- a/include/configs/T208xQDS.h +++ b/include/configs/T208xQDS.h @@ -11,6 +11,8 @@ #ifndef __T208xQDS_H #define __T208xQDS_H +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO #define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ #define CONFIG_MMC #define CONFIG_SPI_FLASH @@ -537,7 +539,7 @@ unsigned long get_board_ddr_clk(void); #ifdef CONFIG_SPI_FLASH #define CONFIG_FSL_ESPI #define CONFIG_SPI_FLASH_STMICRO -#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_RAMBOOT_PBL) +#ifndef CONFIG_SPL_BUILD #define CONFIG_SPI_FLASH_SST #define CONFIG_SPI_FLASH_EON #endif diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h index 3a1c49c..deeabae 100644 --- a/include/configs/T208xRDB.h +++ b/include/configs/T208xRDB.h @@ -11,6 +11,8 @@ #ifndef __T2080RDB_H #define __T2080RDB_H +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO #define CONFIG_T2080RDB #define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ #define CONFIG_MMC @@ -283,7 +285,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ FTIM1_GPCM_TRAD(0x1f)) #define CONFIG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ - FTIM2_GPCM_TCH(0x0) | \ + FTIM2_GPCM_TCH(0x8) | \ FTIM2_GPCM_TWP(0x1f)) #define CONFIG_SYS_CS2_FTIM3 0x0 diff --git a/include/configs/T4240QDS.h b/include/configs/T4240QDS.h index a770dd0..efdb68b 100644 --- a/include/configs/T4240QDS.h +++ b/include/configs/T4240QDS.h @@ -237,7 +237,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ FTIM1_GPCM_TRAD(0x3f)) #define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ - FTIM2_GPCM_TCH(0x0) | \ + FTIM2_GPCM_TCH(0x8) | \ FTIM2_GPCM_TWP(0x1f)) #define CONFIG_SYS_CS3_FTIM3 0x0 diff --git a/include/configs/controlcenterd.h b/include/configs/controlcenterd.h index ec3145f..7eaaf69 100644 --- a/include/configs/controlcenterd.h +++ b/include/configs/controlcenterd.h @@ -45,6 +45,8 @@ #define CONFIG_CONTROLCENTERD #define CONFIG_MP /* support multiple processors */ +#define CONFIG_SYS_GENERIC_BOARD + #define CONFIG_SYS_NO_FLASH #define CONFIG_ENABLE_36BIT_PHYS #define CONFIG_FSL_LAW /* Use common FSL init code */ diff --git a/include/configs/dlvision-10g.h b/include/configs/dlvision-10g.h index 6153a40..d9bd564 100644 --- a/include/configs/dlvision-10g.h +++ b/include/configs/dlvision-10g.h @@ -24,6 +24,7 @@ #define CONFIG_BOARD_EARLY_INIT_R #define CONFIG_MISC_INIT_R #define CONFIG_LAST_STAGE_INIT +#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */ diff --git a/include/configs/dlvision.h b/include/configs/dlvision.h index 1e86c55..af0d602 100644 --- a/include/configs/dlvision.h +++ b/include/configs/dlvision.h @@ -22,6 +22,7 @@ #define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f */ #define CONFIG_MISC_INIT_R /* call misc_init_r */ +#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */ diff --git a/include/configs/gdppc440etx.h b/include/configs/gdppc440etx.h index 6810b3b..12fd75d 100644 --- a/include/configs/gdppc440etx.h +++ b/include/configs/gdppc440etx.h @@ -32,6 +32,7 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f*/ #define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ +#define CONFIG_SYS_GENERIC_BOARD #undef CONFIG_ZERO_BOOTDELAY_CHECK /* ignore keypress on bootdelay==0 */ #define CONFIG_AUTOBOOT_KEYED /* use key strings to stop autoboot */ diff --git a/include/configs/intip.h b/include/configs/intip.h index b56b3aa..928eb5b 100644 --- a/include/configs/intip.h +++ b/include/configs/intip.h @@ -45,6 +45,7 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_BOARD_EARLY_INIT_R 1 /* Call board_early_init_r */ #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ +#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_BOARD_TYPES 1 /* support board types */ #define CONFIG_FIT #define CFG_ALT_MEMTEST diff --git a/include/configs/io.h b/include/configs/io.h index 8e32c25..d4ae0ad 100644 --- a/include/configs/io.h +++ b/include/configs/io.h @@ -24,6 +24,7 @@ #define CONFIG_BOARD_EARLY_INIT_R #define CONFIG_MISC_INIT_R #define CONFIG_LAST_STAGE_INIT +#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */ diff --git a/include/configs/io64.h b/include/configs/io64.h index 6915b20..2a9ff37 100644 --- a/include/configs/io64.h +++ b/include/configs/io64.h @@ -43,6 +43,7 @@ #define CONFIG_BOARD_EARLY_INIT_R #define CONFIG_MISC_INIT_R #define CONFIG_LAST_STAGE_INIT +#define CONFIG_SYS_GENERIC_BOARD #undef CONFIG_ZERO_BOOTDELAY_CHECK /* ignore keypress on bootdelay==0 */ #define CONFIG_AUTOBOOT_KEYED /* use key strings to stop autoboot */ diff --git a/include/configs/iocon.h b/include/configs/iocon.h index ae05bcb..38d473d 100644 --- a/include/configs/iocon.h +++ b/include/configs/iocon.h @@ -23,6 +23,7 @@ #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_BOARD_EARLY_INIT_R #define CONFIG_LAST_STAGE_INIT +#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */ diff --git a/include/configs/neo.h b/include/configs/neo.h index 4937730..09300ca 100644 --- a/include/configs/neo.h +++ b/include/configs/neo.h @@ -25,6 +25,7 @@ #define CONFIG_BOARD_EARLY_INIT_R #define CONFIG_MISC_INIT_R #define CONFIG_LAST_STAGE_INIT +#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */ diff --git a/include/fsl_ifc.h b/include/fsl_ifc.h index 630e4b4..11474b7 100644 --- a/include/fsl_ifc.h +++ b/include/fsl_ifc.h @@ -12,6 +12,8 @@ #include <config.h> #include <common.h> +#define FSL_IFC_V1_1_0 0x01010000 +#define FSL_IFC_V2_0_0 0x02000000 #ifdef CONFIG_SYS_FSL_IFC_LE #define ifc_in32(a) in_le32(a) @@ -367,6 +369,8 @@ */ /* Auto Boot Mode */ #define IFC_NAND_NCFGR_BOOT 0x80000000 +/* SRAM INIT EN */ +#define IFC_NAND_SRAM_INIT_EN 0x20000000 /* Addressing Mode-ROW0+n/COL0 */ #define IFC_NAND_NCFGR_ADDR_MODE_RC0 0x00000000 /* Addressing Mode-ROW0+n/COL0+n */ diff --git a/arch/powerpc/include/asm/immap_qe.h b/include/linux/immap_qe.h index b317dcb..b317dcb 100644 --- a/arch/powerpc/include/asm/immap_qe.h +++ b/include/linux/immap_qe.h diff --git a/include/post.h b/include/post.h index 24ca728..5ebd535 100644 --- a/include/post.h +++ b/include/post.h @@ -38,7 +38,7 @@ #define _POST_WORD_ADDR (CONFIG_SYS_IMMR + CPM_POST_WORD_ADDR) #elif defined(CONFIG_MPC8360) -#include <asm/immap_qe.h> +#include <linux/immap_qe.h> #define _POST_WORD_ADDR (CONFIG_SYS_IMMR + CPM_POST_WORD_ADDR) #elif defined (CONFIG_MPC85xx) diff --git a/tools/buildman/builder.py b/tools/buildman/builder.py index 39a6e8a..0a3900c 100644 --- a/tools/buildman/builder.py +++ b/tools/buildman/builder.py @@ -213,7 +213,10 @@ class BuilderThread(threading.Thread): # self.Make() below, in the event that we do a build. result = command.CommandResult() result.return_code = 0 - out_dir = os.path.join(work_dir, 'build') + if self.builder.in_tree: + out_dir = work_dir + else: + out_dir = os.path.join(work_dir, 'build') # Check if the job was already completed last time done_file = self.builder.GetDoneFile(commit_upto, brd.target) @@ -257,7 +260,10 @@ class BuilderThread(threading.Thread): # Set up the environment and command line env = self.toolchain.MakeEnvironment() Mkdir(out_dir) - args = ['O=build', '-s'] + args = [] + if not self.builder.in_tree: + args.append('O=build') + args.append('-s') if self.builder.num_jobs is not None: args.extend(['-j', str(self.builder.num_jobs)]) config_args = ['%s_config' % brd.target] @@ -431,7 +437,8 @@ class BuilderThread(threading.Thread): result, request_config = self.RunCommit(commit_upto, brd, work_dir, True, True, False) did_config = True - do_config = request_config + if not self.builder.force_reconfig: + do_config = request_config # If we built that commit, then config is done. But if we got # an warning, reconfig next time to force it to build the same @@ -524,6 +531,15 @@ class Builder: toolchains: Toolchains object to use for building upto: Current commit number we are building (0.count-1) warned: Number of builds that produced at least one warning + force_reconfig: Reconfigure U-Boot on each comiit. This disables + incremental building, where buildman reconfigures on the first + commit for a baord, and then just does an incremental build for + the following commits. In fact buildman will reconfigure and + retry for any failing commits, so generally the only effect of + this option is to slow things down. + in_tree: Build U-Boot in-tree instead of specifying an output + directory separate from the source code. This option is really + only useful for testing in-tree builds. Private members: _base_board_dict: Last-summarised Dict of boards @@ -593,7 +609,9 @@ class Builder: self._next_delay_update = datetime.now() self.force_config_on_failure = True self.force_build_failures = False + self.force_reconfig = False self._step = step + self.in_tree = False self.col = terminal.Color() diff --git a/tools/buildman/buildman.py b/tools/buildman/buildman.py index 0da6797..42847ac 100755 --- a/tools/buildman/buildman.py +++ b/tools/buildman/buildman.py @@ -67,6 +67,9 @@ parser.add_option('-B', '--bloat', dest='show_bloat', help='Show changes in function code size for each board') parser.add_option('-c', '--count', dest='count', type='int', default=-1, help='Run build on the top n commits') +parser.add_option('-C', '--force-reconfig', dest='force_reconfig', + action='store_true', default=False, + help='Reconfigure for every commit (disable incremental build)') parser.add_option('-e', '--show_errors', action='store_true', default=False, help='Show errors and warnings') parser.add_option('-f', '--force-build', dest='force_build', @@ -82,6 +85,9 @@ parser.add_option('-g', '--git', type='string', help='Git repo containing branch to build', default='.') parser.add_option('-H', '--full-help', action='store_true', dest='full_help', default=False, help='Display the README file') +parser.add_option('-i', '--in-tree', dest='in_tree', + action='store_true', default=False, + help='Build in the source tree instead of a separate directory') parser.add_option('-j', '--jobs', dest='jobs', type='int', default=None, help='Number of jobs to run at once (passed to make)') parser.add_option('-k', '--keep-outputs', action='store_true', diff --git a/tools/buildman/control.py b/tools/buildman/control.py index cfad535..2dd8043 100644 --- a/tools/buildman/control.py +++ b/tools/buildman/control.py @@ -157,6 +157,8 @@ def DoBuildman(options, args): else: builder.force_build = options.force_build builder.force_build_failures = options.force_build_failures + builder.force_reconfig = options.force_reconfig + builder.in_tree = options.in_tree # Work out which boards to build board_selected = boards.GetSelectedDict() diff --git a/tools/patman/gitutil.py b/tools/patman/gitutil.py index 7b75c83..65754f5 100644 --- a/tools/patman/gitutil.py +++ b/tools/patman/gitutil.py @@ -377,9 +377,14 @@ def EmailPatches(series, cover_fname, args, dry_run, raise_on_error, cc_fname, """ to = BuildEmailList(series.get('to'), '--to', alias, raise_on_error) if not to: - print ("No recipient, please add something like this to a commit\n" - "Series-to: Fred Bloggs <f.blogs@napier.co.nz>") - return + git_config_to = command.Output('git', 'config', 'sendemail.to') + if not git_config_to: + print ("No recipient.\n" + "Please add something like this to a commit\n" + "Series-to: Fred Bloggs <f.blogs@napier.co.nz>\n" + "Or do something like this\n" + "git config sendemail.to u-boot@lists.denx.de") + return cc = BuildEmailList(series.get('cc'), '--cc', alias, raise_on_error) if self_only: to = BuildEmailList([os.getenv('USER')], '--to', alias, raise_on_error) |