diff options
| -rw-r--r-- | arch/arm/mvebu-common/Makefile | 2 | ||||
| -rw-r--r-- | arch/arm/mvebu-common/serdes/Makefile | 6 | ||||
| -rw-r--r-- | arch/arm/mvebu-common/serdes/board_env_spec.h | 262 | ||||
| -rw-r--r-- | arch/arm/mvebu-common/serdes/high_speed_env_lib.c | 1572 | ||||
| -rw-r--r-- | arch/arm/mvebu-common/serdes/high_speed_env_spec.c | 185 | ||||
| -rw-r--r-- | arch/arm/mvebu-common/serdes/high_speed_env_spec.h | 87 |
6 files changed, 2114 insertions, 0 deletions
diff --git a/arch/arm/mvebu-common/Makefile b/arch/arm/mvebu-common/Makefile index 9dcab69..de243fe 100644 --- a/arch/arm/mvebu-common/Makefile +++ b/arch/arm/mvebu-common/Makefile @@ -10,3 +10,5 @@ obj-y = dram.o obj-y += gpio.o obj-$(CONFIG_ARMADA_XP) += mbus.o obj-y += timer.o + +obj-y += serdes/ diff --git a/arch/arm/mvebu-common/serdes/Makefile b/arch/arm/mvebu-common/serdes/Makefile new file mode 100644 index 0000000..a380fee --- /dev/null +++ b/arch/arm/mvebu-common/serdes/Makefile @@ -0,0 +1,6 @@ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-$(CONFIG_SPL_BUILD) = high_speed_env_lib.o +obj-$(CONFIG_SPL_BUILD) += high_speed_env_spec.o diff --git a/arch/arm/mvebu-common/serdes/board_env_spec.h b/arch/arm/mvebu-common/serdes/board_env_spec.h new file mode 100644 index 0000000..36e0ed8 --- /dev/null +++ b/arch/arm/mvebu-common/serdes/board_env_spec.h @@ -0,0 +1,262 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef __BOARD_ENV_SPEC +#define __BOARD_ENV_SPEC + +/* Board specific configuration */ + +/* KW40 */ +#define MV_6710_DEV_ID 0x6710 + +#define MV_6710_Z1_REV 0x0 +#define MV_6710_Z1_ID ((MV_6710_DEV_ID << 16) | MV_6710_Z1_REV) +#define MV_6710_Z1_NAME "MV6710 Z1" + +/* Armada XP Family */ +#define MV_78130_DEV_ID 0x7813 +#define MV_78160_DEV_ID 0x7816 +#define MV_78230_DEV_ID 0x7823 +#define MV_78260_DEV_ID 0x7826 +#define MV_78460_DEV_ID 0x7846 +#define MV_78000_DEV_ID 0x7888 + +#define MV_FPGA_DEV_ID 0x2107 + +#define MV_78XX0_Z1_REV 0x0 + +/* boards ID numbers */ +#define BOARD_ID_BASE 0x0 + +/* New board ID numbers */ +#define DB_88F78XX0_BP_ID (BOARD_ID_BASE) +#define RD_78460_SERVER_ID (DB_88F78XX0_BP_ID + 1) +#define DB_78X60_PCAC_ID (RD_78460_SERVER_ID + 1) +#define FPGA_88F78XX0_ID (DB_78X60_PCAC_ID + 1) +#define DB_88F78XX0_BP_REV2_ID (FPGA_88F78XX0_ID + 1) +#define RD_78460_NAS_ID (DB_88F78XX0_BP_REV2_ID + 1) +#define DB_78X60_AMC_ID (RD_78460_NAS_ID + 1) +#define DB_78X60_PCAC_REV2_ID (DB_78X60_AMC_ID + 1) +#define RD_78460_SERVER_REV2_ID (DB_78X60_PCAC_REV2_ID + 1) +#define DB_784MP_GP_ID (RD_78460_SERVER_REV2_ID + 1) +#define RD_78460_CUSTOMER_ID (DB_784MP_GP_ID + 1) +#define MV_MAX_BOARD_ID (RD_78460_CUSTOMER_ID + 1) +#define INVALID_BAORD_ID 0xFFFFFFFF + +/* Sample at Reset */ +#define MPP_SAMPLE_AT_RESET(id) (0x18230 + (id * 4)) + +/* BIOS Modes related defines */ + +#define SAR0_BOOTWIDTH_OFFSET 3 +#define SAR0_BOOTWIDTH_MASK (0x3 << SAR0_BOOTWIDTH_OFFSET) +#define SAR0_BOOTSRC_OFFSET 5 +#define SAR0_BOOTSRC_MASK (0xF << SAR0_BOOTSRC_OFFSET) + +#define SAR0_L2_SIZE_OFFSET 19 +#define SAR0_L2_SIZE_MASK (0x3 << SAR0_L2_SIZE_OFFSET) +#define SAR0_CPU_FREQ_OFFSET 21 +#define SAR0_CPU_FREQ_MASK (0x7 << SAR0_CPU_FREQ_OFFSET) +#define SAR0_FABRIC_FREQ_OFFSET 24 +#define SAR0_FABRIC_FREQ_MASK (0xF << SAR0_FABRIC_FREQ_OFFSET) +#define SAR0_CPU0CORE_OFFSET 31 +#define SAR0_CPU0CORE_MASK (0x1 << SAR0_CPU0CORE_OFFSET) +#define SAR1_CPU0CORE_OFFSET 0 +#define SAR1_CPU0CORE_MASK (0x1 << SAR1_CPU0CORE_OFFSET) + +#define PEX_CLK_100MHZ_OFFSET 2 +#define PEX_CLK_100MHZ_MASK (0x1 << PEX_CLK_100MHZ_OFFSET) + +#define SAR1_FABRIC_MODE_OFFSET 19 +#define SAR1_FABRIC_MODE_MASK (0x1 << SAR1_FABRIC_MODE_OFFSET) +#define SAR1_CPU_MODE_OFFSET 20 +#define SAR1_CPU_MODE_MASK (0x1 << SAR1_CPU_MODE_OFFSET) + +#define SAR_CPU_FAB_GET(cpu, fab) (((cpu & 0x7) << 21) | ((fab & 0xF) << 24)) + + +#define CORE_AVS_CONTROL_0REG 0x18300 +#define CORE_AVS_CONTROL_2REG 0x18308 +#define CPU_AVS_CONTROL2_REG 0x20868 +#define CPU_AVS_CONTROL0_REG 0x20860 +#define GENERAL_PURPOSE_RESERVED0_REG 0x182E0 + +#define MSAR_TCLK_OFFS 28 +#define MSAR_TCLK_MASK (0x1 << MSAR_TCLK_OFFS) + + +/* Controler environment registers offsets */ +#define GEN_PURP_RES_1_REG 0x182F4 +#define GEN_PURP_RES_2_REG 0x182F8 + +/* registers offsets */ +#define MV_GPP_REGS_OFFSET(unit) (0x18100 + ((unit) * 0x40)) +#define MPP_CONTROL_REG(id) (0x18000 + (id * 4)) +#define MV_GPP_REGS_BASE(unit) (MV_GPP_REGS_OFFSET(unit)) +#define MV_GPP_REGS_BASE_0 (MV_GPP_REGS_OFFSET_0) + +#define GPP_DATA_OUT_REG(grp) (MV_GPP_REGS_BASE(grp) + 0x00) +#define GPP_DATA_OUT_REG_0 (MV_GPP_REGS_BASE_0 + 0x00) /* Used in .S files */ +#define GPP_DATA_OUT_EN_REG(grp) (MV_GPP_REGS_BASE(grp) + 0x04) +#define GPP_BLINK_EN_REG(grp) (MV_GPP_REGS_BASE(grp) + 0x08) +#define GPP_DATA_IN_POL_REG(grp) (MV_GPP_REGS_BASE(grp) + 0x0C) +#define GPP_DATA_IN_REG(grp) (MV_GPP_REGS_BASE(grp) + 0x10) +#define GPP_INT_CAUSE_REG(grp) (MV_GPP_REGS_BASE(grp) + 0x14) +#define GPP_INT_MASK_REG(grp) (MV_GPP_REGS_BASE(grp) + 0x18) +#define GPP_INT_LVL_REG(grp) (MV_GPP_REGS_BASE(grp) + 0x1C) +#define GPP_OUT_SET_REG(grp) (0x18130 + ((grp) * 0x40)) +#define GPP_64_66_DATA_OUT_SET_REG 0x181A4 +#define GPP_OUT_CLEAR_REG(grp) (0x18134 + ((grp) * 0x40)) +#define GPP_64_66_DATA_OUT_CLEAR_REG 0x181B0 +#define GPP_FUNC_SELECT_REG (MV_GPP_REGS_BASE(0) + 0x40) + +#define MV_GPP66 (1 << 2) + +/* Relevant for MV78XX0 */ +#define GPP_DATA_OUT_SET_REG (MV_GPP_REGS_BASE(0) + 0x20) +#define GPP_DATA_OUT_CLEAR_REG (MV_GPP_REGS_BASE(0) + 0x24) + +/* This define describes the maximum number of supported PEX Interfaces */ +#define MV_PEX_MAX_IF 10 +#define MV_PEX_MAX_UNIT 4 + +#define MV_SERDES_NUM_TO_PEX_NUM(num) ((num < 8) ? (num) : (8 + (num / 12))) + +#define PEX_PHY_ACCESS_REG(unit) (0x40000 + ((unit) % 2 * 0x40000) + \ + ((unit)/2 * 0x2000) + 0x1B00) + +#define SATA_BASE_REG(port) (0xA2000 + (port)*0x2000) + +#define SATA_PWR_PLL_CTRL_REG(port) (SATA_BASE_REG(port) + 0x804) +#define SATA_DIG_LP_ENA_REG(port) (SATA_BASE_REG(port) + 0x88C) +#define SATA_REF_CLK_SEL_REG(port) (SATA_BASE_REG(port) + 0x918) +#define SATA_COMPHY_CTRL_REG(port) (SATA_BASE_REG(port) + 0x920) +#define SATA_LP_PHY_EXT_CTRL_REG(port) (SATA_BASE_REG(port) + 0x058) +#define SATA_LP_PHY_EXT_STAT_REG(port) (SATA_BASE_REG(port) + 0x05C) +#define SATA_IMP_TX_SSC_CTRL_REG(port) (SATA_BASE_REG(port) + 0x810) +#define SATA_GEN_1_SET_0_REG(port) (SATA_BASE_REG(port) + 0x834) +#define SATA_GEN_1_SET_1_REG(port) (SATA_BASE_REG(port) + 0x838) +#define SATA_GEN_2_SET_0_REG(port) (SATA_BASE_REG(port) + 0x83C) +#define SATA_GEN_2_SET_1_REG(port) (SATA_BASE_REG(port) + 0x840) + +#define MV_ETH_BASE_ADDR (0x72000) +#define MV_ETH_REGS_OFFSET(port) (MV_ETH_BASE_ADDR - ((port) / 2) * \ + 0x40000 + ((port) % 2) * 0x4000) +#define MV_ETH_REGS_BASE(port) MV_ETH_REGS_OFFSET(port) + + +#define SGMII_PWR_PLL_CTRL_REG(port) (MV_ETH_REGS_BASE(port) + 0xE04) +#define SGMII_DIG_LP_ENA_REG(port) (MV_ETH_REGS_BASE(port) + 0xE8C) +#define SGMII_REF_CLK_SEL_REG(port) (MV_ETH_REGS_BASE(port) + 0xF18) +#define SGMII_SERDES_CFG_REG(port) (MV_ETH_REGS_BASE(port) + 0x4A0) +#define SGMII_SERDES_STAT_REG(port) (MV_ETH_REGS_BASE(port) + 0x4A4) +#define SGMII_COMPHY_CTRL_REG(port) (MV_ETH_REGS_BASE(port) + 0xF20) +#define QSGMII_GEN_1_SETTING_REG(port) (MV_ETH_REGS_BASE(port) + 0xE38) +#define QSGMII_SERDES_CFG_REG(port) (MV_ETH_REGS_BASE(port) + 0x4a0) + +#define SERDES_LINE_MUX_REG_0_7 0x18270 +#define SERDES_LINE_MUX_REG_8_15 0x18274 +#define QSGMII_CONTROL_1_REG 0x18404 + +/* SOC_CTRL_REG fields */ +#define SCR_PEX_ENA_OFFS(pex) ((pex) & 0x3) +#define SCR_PEX_ENA_MASK(pex) (1 << pex) + +#define PCIE0_QUADX1_EN (1<<7) +#define PCIE1_QUADX1_EN (1<<8) + +#define SCR_PEX_4BY1_OFFS(pex) ((pex) + 7) +#define SCR_PEX_4BY1_MASK(pex) (1 << SCR_PEX_4BY1_OFFS(pex)) + +#define PCIE1_CLK_OUT_EN_OFF 5 +#define PCIE1_CLK_OUT_EN_MASK (1 << PCIE1_CLK_OUT_EN_OFF) + +#define PCIE0_CLK_OUT_EN_OFF 4 +#define PCIE0_CLK_OUT_EN_MASK (1 << PCIE0_CLK_OUT_EN_OFF) + +#define SCR_PEX0_4BY1_OFFS 7 +#define SCR_PEX0_4BY1_MASK (1 << SCR_PEX0_4BY1_OFFS) + +#define SCR_PEX1_4BY1_OFFS 8 +#define SCR_PEX1_4BY1_MASK (1 << SCR_PEX1_4BY1_OFFS) + + +#define MV_MISC_REGS_OFFSET (0x18200) +#define MV_MISC_REGS_BASE (MV_MISC_REGS_OFFSET) +#define SOC_CTRL_REG (MV_MISC_REGS_BASE + 0x4) + +/* + * PCI Express Control and Status Registers + */ +#define MAX_PEX_DEVICES 32 +#define MAX_PEX_FUNCS 8 +#define MAX_PEX_BUSSES 256 + +#define PXSR_PEX_BUS_NUM_OFFS 8 /* Bus Number Indication */ +#define PXSR_PEX_BUS_NUM_MASK (0xff << PXSR_PEX_BUS_NUM_OFFS) + +#define PXSR_PEX_DEV_NUM_OFFS 16 /* Device Number Indication */ +#define PXSR_PEX_DEV_NUM_MASK (0x1f << PXSR_PEX_DEV_NUM_OFFS) + +#define PXSR_DL_DOWN 0x1 /* DL_Down indication. */ +#define PXCAR_CONFIG_EN (1 << 31) +#define PEX_STATUS_AND_COMMAND 0x004 +#define PXSAC_MABORT (1 << 29) /* Recieved Master Abort */ + +/* PCI Express Configuration Address Register */ + +/* PEX_CFG_ADDR_REG (PXCAR) */ +#define PXCAR_REG_NUM_OFFS 2 +#define PXCAR_REG_NUM_MAX 0x3F +#define PXCAR_REG_NUM_MASK (PXCAR_REG_NUM_MAX << PXCAR_REG_NUM_OFFS) +#define PXCAR_FUNC_NUM_OFFS 8 +#define PXCAR_FUNC_NUM_MAX 0x7 +#define PXCAR_FUNC_NUM_MASK (PXCAR_FUNC_NUM_MAX << PXCAR_FUNC_NUM_OFFS) +#define PXCAR_DEVICE_NUM_OFFS 11 +#define PXCAR_DEVICE_NUM_MAX 0x1F +#define PXCAR_DEVICE_NUM_MASK (PXCAR_DEVICE_NUM_MAX << PXCAR_DEVICE_NUM_OFFS) +#define PXCAR_BUS_NUM_OFFS 16 +#define PXCAR_BUS_NUM_MAX 0xFF +#define PXCAR_BUS_NUM_MASK (PXCAR_BUS_NUM_MAX << PXCAR_BUS_NUM_OFFS) +#define PXCAR_EXT_REG_NUM_OFFS 24 +#define PXCAR_EXT_REG_NUM_MAX 0xF + +#define PXCAR_REAL_EXT_REG_NUM_OFFS 8 +#define PXCAR_REAL_EXT_REG_NUM_MASK (0xF << PXCAR_REAL_EXT_REG_NUM_OFFS) + + +#define PEX_CAPABILITIES_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x60) +#define PEX_LINK_CAPABILITIES_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x6C) +#define PEX_LINK_CTRL_STATUS_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x70) +#define PEX_LINK_CTRL_STATUS2_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x90) +#define PEX_CTRL_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x1A00) +#define PEX_STATUS_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x1A04) +#define PEX_COMPLT_TMEOUT_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x1A10) +#define PEX_PWR_MNG_EXT_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x1A18) +#define PEX_FLOW_CTRL_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x1A20) +#define PEX_DYNMC_WIDTH_MNG_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x1A30) +#define PEX_ROOT_CMPLX_SSPL_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x1A0C) +#define PEX_RAM_PARITY_CTRL_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x1A50) +#define PEX_DBG_CTRL_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x1A60) +#define PEX_DBG_STATUS_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x1A64) + +#define PXLCSR_NEG_LNK_GEN_OFFS 16 /* Negotiated Link GEN */ +#define PXLCSR_NEG_LNK_GEN_MASK (0xf << PXLCSR_NEG_LNK_GEN_OFFS) +#define PXLCSR_NEG_LNK_GEN_1_1 (0x1 << PXLCSR_NEG_LNK_GEN_OFFS) +#define PXLCSR_NEG_LNK_GEN_2_0 (0x2 << PXLCSR_NEG_LNK_GEN_OFFS) + +#define PEX_CFG_ADDR_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x18F8) +#define PEX_CFG_DATA_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x18FC) +#define PEX_CAUSE_REG(if) ((MV_PEX_IF_REGS_BASE(if)) + 0x1900) + +#define PEX_CAPABILITY_REG 0x60 +#define PEX_DEV_CAPABILITY_REG 0x64 +#define PEX_DEV_CTRL_STAT_REG 0x68 +#define PEX_LINK_CAPABILITY_REG 0x6C +#define PEX_LINK_CTRL_STAT_REG 0x70 +#define PEX_LINK_CTRL_STAT_2_REG 0x90 + +#endif /* __BOARD_ENV_SPEC */ diff --git a/arch/arm/mvebu-common/serdes/high_speed_env_lib.c b/arch/arm/mvebu-common/serdes/high_speed_env_lib.c new file mode 100644 index 0000000..702273a --- /dev/null +++ b/arch/arm/mvebu-common/serdes/high_speed_env_lib.c @@ -0,0 +1,1572 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <i2c.h> +#include <spl.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> + +#include "high_speed_env_spec.h" +#include "board_env_spec.h" + +#define SERDES_VERION "2.1.5" +#define ENDED_OK "High speed PHY - Ended Successfully\n" + +static const u8 serdes_cfg[][SERDES_LAST_UNIT] = BIN_SERDES_CFG; + +extern MV_BIN_SERDES_CFG *serdes_info_tbl[]; + +extern u8 rd78460gp_twsi_dev[]; +extern u8 db88f78xx0rev2_twsi_dev[]; + +u32 pex_cfg_read(u32 pex_if, u32 bus, u32 dev, u32 func, u32 offs); +int pex_local_bus_num_set(u32 pex_if, u32 bus_num); +int pex_local_dev_num_set(u32 pex_if, u32 dev_num); + +#define MV_BOARD_PEX_MODULE_ADDR 0x23 +#define MV_BOARD_PEX_MODULE_ID 1 +#define MV_BOARD_ETM_MODULE_ID 2 + +#define PEX_MODULE_DETECT 1 +#define ETM_MODULE_DETECT 2 + +#define PEX_MODE_GET(satr) ((satr & 0x6) >> 1) +#define PEX_CAPABILITY_GET(satr) (satr & 1) +#define MV_PEX_UNIT_TO_IF(pex_unit) ((pex_unit < 3) ? (pex_unit * 4) : 9) + +/* Static parametes */ +static int config_module; +static int switch_module; + +/* Local function */ +static u32 board_id_get(void) +{ +#if defined(CONFIG_DB_88F78X60) + return DB_88F78XX0_BP_ID; +#elif defined(CONFIG_RD_88F78460_SERVER) + return RD_78460_SERVER_ID; +#elif defined(CONFIG_RD_78460_SERVER_REV2) + return RD_78460_SERVER_REV2_ID; +#elif defined(CONFIG_DB_78X60_PCAC) + return DB_78X60_PCAC_ID; +#elif defined(CONFIG_DB_88F78X60_REV2) + return DB_88F78XX0_BP_REV2_ID; +#elif defined(CONFIG_RD_78460_NAS) + return RD_78460_NAS_ID; +#elif defined(CONFIG_DB_78X60_AMC) + return DB_78X60_AMC_ID; +#elif defined(CONFIG_DB_78X60_PCAC_REV2) + return DB_78X60_PCAC_REV2_ID; +#elif defined(CONFIG_DB_784MP_GP) + return DB_784MP_GP_ID; +#elif defined(CONFIG_RD_78460_CUSTOMER) + return RD_78460_CUSTOMER_ID; +#else + /* + * Return 0 here for custom board as this should not be used + * for custom boards. + */ + return 0; +#endif +} + +static u8 board_sat_r_get(u8 dev_num, u8 reg) +{ + u8 data; + u8 *dev; + u32 board_id = board_id_get(); + int ret; + + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + + switch (board_id) { + case DB_784MP_GP_ID: + dev = rd78460gp_twsi_dev; + + break; + case DB_88F78XX0_BP_ID: + case DB_88F78XX0_BP_REV2_ID: + dev = db88f78xx0rev2_twsi_dev; + break; + + case DB_78X60_PCAC_ID: + case FPGA_88F78XX0_ID: + case DB_78X60_PCAC_REV2_ID: + case RD_78460_SERVER_REV2_ID: + default: + return 0; + } + + /* Read MPP module ID */ + ret = i2c_read(dev[dev_num], 0, 1, (u8 *)&data, 1); + if (ret) + return MV_ERROR; + + return data; +} + +static int board_modules_scan(void) +{ + u8 val; + u32 board_id = board_id_get(); + int ret; + + /* Perform scan only for DB board */ + if ((board_id == DB_88F78XX0_BP_ID) || + (board_id == DB_88F78XX0_BP_REV2_ID)) { + /* reset modules flags */ + config_module = 0; + + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + + /* SERDES module (only PEX model is supported now) */ + ret = i2c_read(MV_BOARD_PEX_MODULE_ADDR, 0, 1, (u8 *)&val, 1); + if (ret) + return MV_ERROR; + + if (val == MV_BOARD_PEX_MODULE_ID) + config_module = PEX_MODULE_DETECT; + if (val == MV_BOARD_ETM_MODULE_ID) + config_module = ETM_MODULE_DETECT; + } else if (board_id == RD_78460_NAS_ID) { + switch_module = 0; + if ((reg_read(GPP_DATA_IN_REG(2)) & MV_GPP66) == 0x0) + switch_module = 1; + } + + return MV_OK; +} + +u32 pex_max_unit_get(void) +{ + /* + * TODO: + * Right now only MV78460 is supported. Other SoC's might need + * a different value here. + */ + return MV_PEX_MAX_UNIT; +} + +u32 pex_max_if_get(void) +{ + /* + * TODO: + * Right now only MV78460 is supported. Other SoC's might need + * a different value here. + */ + return MV_PEX_MAX_IF; +} + +u8 board_cpu_freq_get(void) +{ + u32 sar; + u32 sar_msb; + + sar = reg_read(MPP_SAMPLE_AT_RESET(0)); + sar_msb = reg_read(MPP_SAMPLE_AT_RESET(1)); + return ((sar_msb & 0x100000) >> 17) | ((sar & 0xe00000) >> 21); +} + +__weak MV_BIN_SERDES_CFG *board_serdes_cfg_get(u8 pex_mode) +{ + u32 board_id; + u32 serdes_cfg_val = 0; /* default */ + + board_id = board_id_get(); + + switch (board_id) { + case DB_784MP_GP_ID: + serdes_cfg_val = 0; + break; + } + + return &serdes_info_tbl[board_id - BOARD_ID_BASE][serdes_cfg_val]; +} + +u16 ctrl_model_get(void) +{ + /* Right now only MV78460 supported */ + return MV_78460_DEV_ID; +} + +u32 get_line_cfg(u32 line_num, MV_BIN_SERDES_CFG *info) +{ + if (line_num < 8) + return (info->line0_7 >> (line_num << 2)) & 0xF; + else + return (info->line8_15 >> ((line_num - 8) << 2)) & 0xF; +} + +int serdes_phy_config(void) +{ + int status = MV_OK; + u32 line_cfg; + u8 line_num; + /* addr/value for each line @ every setup step */ + u32 addr[16][11], val[16][11]; + u8 pex_unit, pex_line_num; + u8 sgmii_port = 0; + u32 tmp; + u32 in_direct; + u8 max_serdes_lines; + MV_BIN_SERDES_CFG *info; + u8 satr11; + u8 sata_port; + u8 freq; + u8 device_rev; + u32 rx_high_imp_mode; + u16 ctrl_mode; + u32 board_id = board_id_get(); + u32 pex_if; + u32 pex_if_num; + + /* + * TODO: + * Right now we only support the MV78460 with 16 serdes lines + */ + max_serdes_lines = 16; + if (max_serdes_lines == 0) + return MV_OK; + + switch (board_id) { + case DB_78X60_AMC_ID: + case DB_78X60_PCAC_REV2_ID: + case RD_78460_CUSTOMER_ID: + case RD_78460_SERVER_ID: + case RD_78460_SERVER_REV2_ID: + case DB_78X60_PCAC_ID: + satr11 = (0x1 << 1) | 1; + break; + case FPGA_88F78XX0_ID: + case RD_78460_NAS_ID: + satr11 = (0x0 << 1) | 1; + break; + case DB_88F78XX0_BP_REV2_ID: + case DB_784MP_GP_ID: + case DB_88F78XX0_BP_ID: + satr11 = board_sat_r_get(1, 1); + if ((u8) MV_ERROR == (u8) satr11) + return MV_ERROR; + break; + } + + board_modules_scan(); + memset(addr, 0, sizeof(addr)); + memset(val, 0, sizeof(val)); + + /* Check if DRAM is already initialized */ + if (reg_read(REG_BOOTROM_ROUTINE_ADDR) & + (1 << REG_BOOTROM_ROUTINE_DRAM_INIT_OFFS)) { + DEBUG_INIT_S("High speed PHY - Version: "); + DEBUG_INIT_S(SERDES_VERION); + DEBUG_INIT_S(" - 2nd boot - Skip\n"); + return MV_OK; + } + DEBUG_INIT_S("High speed PHY - Version: "); + DEBUG_INIT_S(SERDES_VERION); + DEBUG_INIT_S(" (COM-PHY-V20)\n"); + + /* + * AVS : disable AVS for frequency less than 1333 + */ + freq = board_cpu_freq_get(); + device_rev = mv_ctrl_rev_get(); + + if (device_rev == 2) { /* for B0 only */ + u32 cpu_avs; + u8 fabric_freq; + cpu_avs = reg_read(CPU_AVS_CONTROL2_REG); + DEBUG_RD_REG(CPU_AVS_CONTROL2_REG, cpu_avs); + cpu_avs &= ~(1 << 9); + + if ((0x4 == freq) || (0xB == freq)) { + u32 tmp2; + + tmp2 = reg_read(CPU_AVS_CONTROL0_REG); + DEBUG_RD_REG(CPU_AVS_CONTROL0_REG, tmp2); + /* cpu upper limit = 1.1V cpu lower limit = 0.9125V */ + tmp2 |= 0x0FF; + reg_write(CPU_AVS_CONTROL0_REG, tmp2); + DEBUG_WR_REG(CPU_AVS_CONTROL0_REG, tmp2); + cpu_avs |= (1 << 9); /* cpu avs enable */ + cpu_avs |= (1 << 18); /* AvsAvddDetEn enable */ + fabric_freq = (reg_read(MPP_SAMPLE_AT_RESET(0)) & + SAR0_FABRIC_FREQ_MASK) >> SAR0_FABRIC_FREQ_OFFSET; + if ((0xB == freq) && (5 == fabric_freq)) { + u32 core_avs; + + core_avs = reg_read(CORE_AVS_CONTROL_0REG); + DEBUG_RD_REG(CORE_AVS_CONTROL_0REG, core_avs); + + /* + * Set core lower limit = 0.9V & + * core upper limit = 0.9125V + */ + core_avs &= ~(0xff); + core_avs |= 0x0E; + reg_write(CORE_AVS_CONTROL_0REG, core_avs); + DEBUG_WR_REG(CORE_AVS_CONTROL_0REG, core_avs); + + core_avs = reg_read(CORE_AVS_CONTROL_2REG); + DEBUG_RD_REG(CORE_AVS_CONTROL_2REG, core_avs); + core_avs |= (1 << 9); /* core AVS enable */ + reg_write(CORE_AVS_CONTROL_2REG, core_avs); + DEBUG_WR_REG(CORE_AVS_CONTROL_2REG, core_avs); + + tmp2 = reg_read(GENERAL_PURPOSE_RESERVED0_REG); + DEBUG_RD_REG(GENERAL_PURPOSE_RESERVED0_REG, + tmp2); + tmp2 |= 0x1; /* AvsCoreAvddDetEn enable */ + reg_write(GENERAL_PURPOSE_RESERVED0_REG, tmp2); + DEBUG_WR_REG(GENERAL_PURPOSE_RESERVED0_REG, + tmp2); + } + } + reg_write(CPU_AVS_CONTROL2_REG, cpu_avs); + DEBUG_WR_REG(CPU_AVS_CONTROL2_REG, cpu_avs); + } + + info = board_serdes_cfg_get(PEX_MODE_GET(satr11)); + DEBUG_INIT_FULL_S("info->line0_7= 0x"); + DEBUG_INIT_FULL_D(info->line0_7, 8); + DEBUG_INIT_FULL_S(" info->line8_15= 0x"); + DEBUG_INIT_FULL_D(info->line8_15, 8); + DEBUG_INIT_FULL_S("\n"); + + if (info == NULL) { + DEBUG_INIT_S("Hight speed PHY Error #1\n"); + return MV_ERROR; + } + + if (config_module & ETM_MODULE_DETECT) { /* step 0.9 ETM */ + DEBUG_INIT_FULL_S("ETM module detect Step 0.9:\n"); + reg_write(SERDES_LINE_MUX_REG_0_7, 0x11111111); + DEBUG_WR_REG(SERDES_LINE_MUX_REG_0_7, 0x11111111); + info->pex_mode[1] = PEX_BUS_DISABLED; /* pex unit 1 is configure for ETM */ + mdelay(100); + reg_write(PEX_PHY_ACCESS_REG(1), (0x002 << 16) | 0xf44d); /* SETM0 - start calibration */ + DEBUG_WR_REG(PEX_PHY_ACCESS_REG(1), (0x002 << 16) | 0xf44d); /* SETM0 - start calibration */ + reg_write(PEX_PHY_ACCESS_REG(1), (0x302 << 16) | 0xf44d); /* SETM1 - start calibration */ + DEBUG_WR_REG(PEX_PHY_ACCESS_REG(1), (0x302 << 16) | 0xf44d); /* SETM1 - start calibration */ + reg_write(PEX_PHY_ACCESS_REG(1), (0x001 << 16) | 0xf801); /* SETM0 - SATA mode & 25MHz ref clk */ + DEBUG_WR_REG(PEX_PHY_ACCESS_REG(1), (0x001 << 16) | 0xf801); /* SETM0 - SATA mode & 25MHz ref clk */ + reg_write(PEX_PHY_ACCESS_REG(1), (0x301 << 16) | 0xf801); /* SETM1 - SATA mode & 25MHz ref clk */ + DEBUG_WR_REG(PEX_PHY_ACCESS_REG(1), (0x301 << 16) | 0xf801); /* SETM1 - SATA mode & 25MHz ref clk */ + reg_write(PEX_PHY_ACCESS_REG(1), (0x011 << 16) | 0x0BFF); /* SETM0 - G3 full swing AMP */ + DEBUG_WR_REG(PEX_PHY_ACCESS_REG(1), (0x011 << 16) | 0x0BFF); /* SETM0 - G3 full swing AMP */ + reg_write(PEX_PHY_ACCESS_REG(1), (0x311 << 16) | 0x0BFF); /* SETM1 - G3 full swing AMP */ + DEBUG_WR_REG(PEX_PHY_ACCESS_REG(1), (0x311 << 16) | 0x0BFF); /* SETM1 - G3 full swing AMP */ + reg_write(PEX_PHY_ACCESS_REG(1), (0x023 << 16) | 0x0800); /* SETM0 - 40 data bit width */ + DEBUG_WR_REG(PEX_PHY_ACCESS_REG(1), (0x023 << 16) | 0x0800); /* SETM0 - 40 data bit width */ + reg_write(PEX_PHY_ACCESS_REG(1), (0x323 << 16) | 0x0800); /* SETM1 - 40 data bit width */ + DEBUG_WR_REG(PEX_PHY_ACCESS_REG(1), (0x323 << 16) | 0x0800); /* SETM1 - 40 data bit width */ + reg_write(PEX_PHY_ACCESS_REG(1), (0x046 << 16) | 0x0400); /* lane0(serdes4) */ + DEBUG_WR_REG(PEX_PHY_ACCESS_REG(1), (0x046 << 16) | 0x0400); /* lane0(serdes4) */ + reg_write(PEX_PHY_ACCESS_REG(1), (0x346 << 16) | 0x0400); /* lane3(serdes7) */ + DEBUG_WR_REG(PEX_PHY_ACCESS_REG(1), (0x346 << 16) | 0x0400); /* lane3(serdes7) */ + } + + /* STEP -1 [PEX-Only] First phase of PEX-PIPE Configuration: */ + DEBUG_INIT_FULL_S("Step 1: First phase of PEX-PIPE Configuration\n"); + for (pex_unit = 0; pex_unit < pex_max_unit_get(); pex_unit++) { + if (info->pex_mode[pex_unit] == PEX_BUS_DISABLED) + continue; + + /* 1. GLOB_CLK_CTRL Reset and Clock Control */ + reg_write(PEX_PHY_ACCESS_REG(pex_unit), (0xC1 << 16) | 0x25); + DEBUG_WR_REG(PEX_PHY_ACCESS_REG(pex_unit), (0xC1 << 16) | 0x25); + + /* 2. GLOB_TEST_CTRL Test Mode Control */ + if (info->pex_mode[pex_unit] == PEX_BUS_MODE_X4) { + reg_write(PEX_PHY_ACCESS_REG(pex_unit), + (0xC2 << 16) | 0x200); + DEBUG_WR_REG(PEX_PHY_ACCESS_REG(pex_unit), + (0xC2 << 16) | 0x200); + } + + /* 3. GLOB_CLK_SRC_LO Clock Source Low */ + if (info->pex_mode[pex_unit] == PEX_BUS_MODE_X1) { + reg_write(PEX_PHY_ACCESS_REG(pex_unit), + (0xC3 << 16) | 0x0F); + DEBUG_WR_REG(PEX_PHY_ACCESS_REG(pex_unit), + (0xC3 << 16) | 0x0F); + } + + reg_write(PEX_PHY_ACCESS_REG(pex_unit), (0xC5 << 16) | 0x11F); + DEBUG_WR_REG(PEX_PHY_ACCESS_REG(pex_unit), + (0xC5 << 16) | 0x11F); + } + + /* + * 2 Configure the desire PIN_PHY_GEN and do power down to the PU_PLL, + * PU_RX,PU_TX. (bits[12:5]) + */ + DEBUG_INIT_FULL_S("Step 2: Configure the desire PIN_PHY_GEN\n"); + for (line_num = 0; line_num < max_serdes_lines; line_num++) { + line_cfg = get_line_cfg(line_num, info); + if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_UNCONNECTED]) + continue; + if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_PEX]) + continue; + if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SATA]) { + switch (line_num) { + case 4: + case 6: + sata_port = 0; + break; + case 5: + sata_port = 1; + break; + default: + DEBUG_INIT_C + ("SATA port error for serdes line: ", + line_num, 2); + return MV_ERROR; + } + tmp = reg_read(SATA_LP_PHY_EXT_CTRL_REG(sata_port)); + DEBUG_RD_REG(SATA_LP_PHY_EXT_CTRL_REG(sata_port), tmp); + tmp &= ~((0x1ff << 5) | 0x7); + tmp |= ((info->bus_speed & (1 << line_num)) != 0) ? + (0x11 << 5) : 0x0; + + reg_write(SATA_LP_PHY_EXT_CTRL_REG(sata_port), tmp); + DEBUG_WR_REG(SATA_LP_PHY_EXT_CTRL_REG(sata_port), tmp); + } + + if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_QSGMII]) { + /* + * 4) Configure the desire PIN_PHY_GEN and do power + * down to the PU_PLL,PU_RX,PU_TX. (bits[12:5]) + */ + tmp = reg_read(SGMII_SERDES_CFG_REG(0)); + DEBUG_RD_REG(SGMII_SERDES_CFG_REG(0), tmp); + tmp &= ~((0x1ff << 5) | 0x7); + tmp |= 0x660; + reg_write(SGMII_SERDES_CFG_REG(0), tmp); + DEBUG_WR_REG(SGMII_SERDES_CFG_REG(0), tmp); + continue; + } + + if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SGMII0]) + sgmii_port = 0; + else if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SGMII1]) + sgmii_port = 1; + else if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SGMII2]) + sgmii_port = 2; + else if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SGMII3]) + sgmii_port = 3; + else + continue; + + tmp = reg_read(SGMII_SERDES_CFG_REG(sgmii_port)); + DEBUG_RD_REG(SGMII_SERDES_CFG_REG(sgmii_port), tmp); + tmp &= ~((0x1ff << 5) | 0x7); + tmp |= (((info->bus_speed & (1 << line_num)) != 0) ? + (0x88 << 5) : (0x66 << 5)); + reg_write(SGMII_SERDES_CFG_REG(sgmii_port), tmp); + DEBUG_WR_REG(SGMII_SERDES_CFG_REG(sgmii_port), tmp); + } + + /* Step 3 - QSGMII enable */ + DEBUG_INIT_FULL_S("Step 3 QSGMII enable\n"); + for (line_num = 0; line_num < max_serdes_lines; line_num++) { + line_cfg = get_line_cfg(line_num, info); + if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_QSGMII]) { + /* QSGMII Active bit set to true */ + tmp = reg_read(QSGMII_CONTROL_1_REG); + DEBUG_RD_REG(QSGMII_CONTROL_1_REG, tmp); + tmp |= (1 << 30); +#ifdef ERRATA_GL_6572255 + tmp |= (1 << 27); +#endif + reg_write(QSGMII_CONTROL_1_REG, tmp); + DEBUG_WR_REG(QSGMII_CONTROL_1_REG, tmp); + } + } + + /* Step 4 - configure SERDES MUXes */ + DEBUG_INIT_FULL_S("Step 4: Configure SERDES MUXes\n"); + if (config_module & ETM_MODULE_DETECT) { + reg_write(SERDES_LINE_MUX_REG_0_7, 0x40041111); + DEBUG_WR_REG(SERDES_LINE_MUX_REG_0_7, 0x40041111); + } else { + reg_write(SERDES_LINE_MUX_REG_0_7, info->line0_7); + DEBUG_WR_REG(SERDES_LINE_MUX_REG_0_7, info->line0_7); + } + reg_write(SERDES_LINE_MUX_REG_8_15, info->line8_15); + DEBUG_WR_REG(SERDES_LINE_MUX_REG_8_15, info->line8_15); + + /* Step 5: Activate the RX High Impedance Mode */ + DEBUG_INIT_FULL_S("Step 5: Activate the RX High Impedance Mode\n"); + rx_high_imp_mode = 0x8080; + if (device_rev == 2) /* for B0 only */ + rx_high_imp_mode |= 4; + + for (line_num = 0; line_num < max_serdes_lines; line_num++) { + /* for each serdes lane */ + DEBUG_INIT_FULL_S("SERDES "); + DEBUG_INIT_FULL_D_10(line_num, 2); + line_cfg = get_line_cfg(line_num, info); + if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_UNCONNECTED]) { + DEBUG_INIT_FULL_S(" unconnected ***\n"); + continue; + } + if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_PEX]) { + pex_unit = line_num >> 2; + pex_line_num = line_num % 4; + DEBUG_INIT_FULL_S(" - PEX unit "); + DEBUG_INIT_FULL_D_10(pex_unit, 1); + DEBUG_INIT_FULL_S(" line= "); + DEBUG_INIT_FULL_D_10(pex_line_num, 1); + DEBUG_INIT_FULL_S("\n"); + + /* Needed for PEX_PHY_ACCESS_REG macro */ + if ((line_num > 7) && + (info->pex_mode[3] == PEX_BUS_MODE_X8)) + /* lines 8 - 15 are belong to PEX3 in x8 mode */ + pex_unit = 3; + + if (info->pex_mode[pex_unit] == PEX_BUS_DISABLED) + continue; + + /* + * 8) Activate the RX High Impedance Mode field + * (bit [2]) in register /PCIe_USB Control (Each MAC + * contain different Access to reach its + * Serdes-Regfile). + * [PEX-Only] Set bit[12]: The analog part latches idle + * if PU_TX = 1 and PU_PLL =1. + */ + + /* Termination enable */ + if (info->pex_mode[pex_unit] == PEX_BUS_MODE_X1) { + in_direct = (0x48 << 16) | (pex_line_num << 24) | + 0x1000 | rx_high_imp_mode; /* x1 */ + } else if ((info->pex_mode[pex_unit] == + PEX_BUS_MODE_X4) && (pex_line_num == 0)) + in_direct = (0x48 << 16) | (pex_line_num << 24) | + 0x1000 | (rx_high_imp_mode & 0xff); /* x4 */ + else + in_direct = 0; + + if (in_direct) { + reg_write(PEX_PHY_ACCESS_REG(pex_unit), + in_direct); + DEBUG_WR_REG(PEX_PHY_ACCESS_REG(pex_unit), + in_direct); + } + + continue; + } + + if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SATA]) { + /* + * port 0 for serdes lines 4,6, and port 1 for + * serdes lines 5 + */ + sata_port = line_num & 1; + DEBUG_INIT_FULL_S(" - SATA port "); + DEBUG_INIT_FULL_D_10(sata_port, 2); + DEBUG_INIT_FULL_S("\n"); + reg_write(SATA_COMPHY_CTRL_REG(sata_port), + rx_high_imp_mode); + DEBUG_WR_REG(SATA_COMPHY_CTRL_REG(sata_port), + rx_high_imp_mode); + continue; + } + + if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_QSGMII]) { + DEBUG_INIT_FULL_S(" - QSGMII\n"); + reg_write(SGMII_COMPHY_CTRL_REG(0), rx_high_imp_mode); + DEBUG_WR_REG(SGMII_COMPHY_CTRL_REG(0), + rx_high_imp_mode); + continue; + } + + if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SGMII0]) + sgmii_port = 0; + else if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SGMII1]) + sgmii_port = 1; + else if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SGMII2]) + sgmii_port = 2; + else if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SGMII3]) + sgmii_port = 3; + else + continue; + DEBUG_INIT_FULL_S(" - SGMII port "); + DEBUG_INIT_FULL_D_10(sgmii_port, 2); + DEBUG_INIT_FULL_S("\n"); + reg_write(SGMII_COMPHY_CTRL_REG(sgmii_port), rx_high_imp_mode); + DEBUG_WR_REG(SGMII_COMPHY_CTRL_REG(sgmii_port), + rx_high_imp_mode); + } /* for each serdes lane */ + + /* Step 6 [PEX-Only] PEX-Main configuration (X4 or X1): */ + DEBUG_INIT_FULL_S("Step 6: [PEX-Only] PEX-Main configuration (X4 or X1)\n"); + tmp = reg_read(SOC_CTRL_REG); + DEBUG_RD_REG(SOC_CTRL_REG, tmp); + tmp &= 0x200; + if (info->pex_mode[0] == PEX_BUS_MODE_X1) + tmp |= PCIE0_QUADX1_EN; + if (info->pex_mode[1] == PEX_BUS_MODE_X1) + tmp |= PCIE1_QUADX1_EN; + if (((reg_read(MPP_SAMPLE_AT_RESET(0)) & PEX_CLK_100MHZ_MASK) >> + PEX_CLK_100MHZ_OFFSET) == 0x1) + tmp |= (PCIE0_CLK_OUT_EN_MASK | PCIE1_CLK_OUT_EN_MASK); + + reg_write(SOC_CTRL_REG, tmp); + DEBUG_WR_REG(SOC_CTRL_REG, tmp); + + /* 6.2 PCI Express Link Capabilities */ + DEBUG_INIT_FULL_S("Step 6.2: [PEX-Only] PCI Express Link Capabilities\n"); + + for (line_num = 0; line_num < max_serdes_lines; line_num++) { + line_cfg = get_line_cfg(line_num, info); + + if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_PEX]) { + /* + * PCI Express Control + * 0xX1A00 [0]: + * 0x0 X4-Link. + * 0x1 X1-Link + */ + pex_unit = line_num >> 2; + pex_if = MV_SERDES_NUM_TO_PEX_NUM(line_num); + if (info->pex_mode[pex_unit] == PEX_BUS_DISABLED) + continue; + + /* set Common Clock Configuration */ + tmp = reg_read(PEX_LINK_CTRL_STATUS_REG(pex_if)); + DEBUG_RD_REG(PEX_LINK_CTRL_STATUS_REG(pex_if), tmp); + tmp |= (1 << 6); + reg_write(PEX_LINK_CTRL_STATUS_REG(pex_if), tmp); + DEBUG_WR_REG(PEX_LINK_CTRL_STATUS_REG(pex_if), tmp); + + tmp = reg_read(PEX_LINK_CAPABILITIES_REG(pex_if)); + DEBUG_RD_REG(PEX_LINK_CAPABILITIES_REG(pex_if), tmp); + tmp &= ~(0x3FF); + if (info->pex_mode[pex_unit] == PEX_BUS_MODE_X1) + tmp |= (0x1 << 4); + if (info->pex_mode[pex_unit] == PEX_BUS_MODE_X4) + tmp |= (0x4 << 4); + if (0 == PEX_CAPABILITY_GET(satr11)) + tmp |= 0x1; + else + tmp |= 0x2; + DEBUG_INIT_FULL_S("Step 6.2: PEX "); + DEBUG_INIT_FULL_D(pex_if, 1); + DEBUG_INIT_FULL_C(" set GEN", (tmp & 3), 1); + reg_write(PEX_LINK_CAPABILITIES_REG(pex_if), tmp); + DEBUG_WR_REG(PEX_LINK_CAPABILITIES_REG(pex_if), tmp); + + /* + * If pex is X4, no need to pass thru the other + * 3X1 serdes lines + */ + if (info->pex_mode[pex_unit] == PEX_BUS_MODE_X4) + line_num += 3; + } + } + + /* + * Step 7 [PEX-X4 Only] To create PEX-Link that contain 4-lanes you + * need to config the register SOC_Misc/General Purpose2 + * (Address= 182F8) + */ + DEBUG_INIT_FULL_S("Step 7: [PEX-X4 Only] To create PEX-Link\n"); + tmp = reg_read(GEN_PURP_RES_2_REG); + DEBUG_RD_REG(GEN_PURP_RES_2_REG, tmp); + + tmp &= 0xFFFF0000; + if (info->pex_mode[0] == PEX_BUS_MODE_X4) + tmp |= 0x0000000F; + + if (info->pex_mode[1] == PEX_BUS_MODE_X4) + tmp |= 0x000000F0; + + if (info->pex_mode[2] == PEX_BUS_MODE_X4) + tmp |= 0x00000F00; + + if (info->pex_mode[3] == PEX_BUS_MODE_X4) + tmp |= 0x0000F000; + + reg_write(GEN_PURP_RES_2_REG, tmp); + DEBUG_WR_REG(GEN_PURP_RES_2_REG, tmp); + + /* Steps 8 , 9 ,10 - use prepared REG addresses and values */ + DEBUG_INIT_FULL_S("Steps 7,8,9,10 and 11\n"); + + /* Prepare PHY parameters for each step according to MUX selection */ + for (line_num = 0; line_num < max_serdes_lines; line_num++) { + /* for each serdes lane */ + + line_cfg = get_line_cfg(line_num, info); + + if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_UNCONNECTED]) + continue; + + if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_PEX]) { + pex_unit = line_num >> 2; + pex_line_num = line_num % 4; + + if (info->pex_mode[pex_unit] == PEX_BUS_DISABLED) + continue; + /* + * 8) Configure the desire PHY_MODE (bits [7:5]) + * and REF_FREF_SEL (bits[4:0]) in the register Power + * and PLL Control (Each MAC contain different Access + * to reach its Serdes-Regfile). + */ + if (((info->pex_mode[pex_unit] == PEX_BUS_MODE_X4) && + (0 == pex_line_num)) + || ((info->pex_mode[pex_unit] == PEX_BUS_MODE_X1))) { + reg_write(PEX_PHY_ACCESS_REG(pex_unit), + (0x01 << 16) | (pex_line_num << 24) | + 0xFC60); + DEBUG_WR_REG(PEX_PHY_ACCESS_REG(pex_unit), + (0x01 << 16) | (pex_line_num << 24) + | 0xFC60); + /* + * Step 8.1: [PEX-Only] Configure Max PLL Rate + * (bit 8 in KVCO Calibration Control and + * bits[10:9] in + */ + /* Use Maximum PLL Rate(Bit 8) */ + reg_write(PEX_PHY_ACCESS_REG(pex_unit), + (0x02 << 16) | (1 << 31) | + (pex_line_num << 24)); /* read command */ + DEBUG_WR_REG(PEX_PHY_ACCESS_REG(pex_unit), + (0x02 << 16) | (1 << 31) | + (pex_line_num << 24)); + tmp = reg_read(PEX_PHY_ACCESS_REG(pex_unit)); + DEBUG_RD_REG(PEX_PHY_ACCESS_REG(pex_unit), tmp); + tmp &= ~(1 << 31); + tmp |= (1 << 8); + reg_write(PEX_PHY_ACCESS_REG(pex_unit), tmp); + DEBUG_WR_REG(PEX_PHY_ACCESS_REG(pex_unit), tmp); + + /* Use Maximum PLL Rate(Bits [10:9]) */ + reg_write(PEX_PHY_ACCESS_REG(pex_unit), + (0x81 << 16) | (1 << 31) | + (pex_line_num << 24)); /* read command */ + DEBUG_WR_REG(PEX_PHY_ACCESS_REG(pex_unit), + (0x81 << 16) | (1 << 31) | + (pex_line_num << 24)); + tmp = reg_read(PEX_PHY_ACCESS_REG(pex_unit)); + DEBUG_RD_REG(PEX_PHY_ACCESS_REG(pex_unit), tmp); + tmp &= ~(1 << 31); + tmp |= (3 << 9); + reg_write(PEX_PHY_ACCESS_REG(pex_unit), tmp); + DEBUG_WR_REG(PEX_PHY_ACCESS_REG(pex_unit), tmp); + } + + continue; + } + + if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SATA]) { + /* + * Port 0 for serdes lines 4,6, and port 1 for serdes + * lines 5 + */ + sata_port = line_num & 1; + + /* + * 8) Configure the desire PHY_MODE (bits [7:5]) and + * REF_FREF_SEL (bits[4:0]) in the register Power + * and PLL Control (Each MAC contain different Access + * to reach its Serdes-Regfile). + */ + reg_write(SATA_PWR_PLL_CTRL_REG(sata_port), 0xF801); + DEBUG_WR_REG(SATA_PWR_PLL_CTRL_REG(sata_port), 0xF801); + + /* 9) Configure the desire SEL_BITS */ + reg_write(SATA_DIG_LP_ENA_REG(sata_port), 0x400); + DEBUG_WR_REG(SATA_DIG_LP_ENA_REG(sata_port), 0x400); + + /* 10) Configure the desire REFCLK_SEL */ + + reg_write(SATA_REF_CLK_SEL_REG(sata_port), 0x400); + DEBUG_WR_REG(SATA_REF_CLK_SEL_REG(sata_port), 0x400); + + /* 11) Power up to the PU_PLL,PU_RX,PU_TX. */ + tmp = reg_read(SATA_LP_PHY_EXT_CTRL_REG(sata_port)); + DEBUG_RD_REG(SATA_LP_PHY_EXT_CTRL_REG(sata_port), tmp); + tmp |= 7; + reg_write(SATA_LP_PHY_EXT_CTRL_REG(sata_port), tmp); + DEBUG_WR_REG(SATA_LP_PHY_EXT_CTRL_REG(sata_port), tmp); + + continue; + } + + if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_QSGMII]) { + /* + * 8) Configure the desire PHY_MODE (bits [7:5]) + * and REF_FREF_SEL (bits[4:0]) in the register + */ + reg_write(SGMII_PWR_PLL_CTRL_REG(0), 0xF881); + DEBUG_WR_REG(SGMII_PWR_PLL_CTRL_REG(0), 0xF881); + + /* + * 9) Configure the desire SEL_BITS (bits [11:0] + * in register + */ + reg_write(SGMII_DIG_LP_ENA_REG(0), 0x400); + DEBUG_WR_REG(SGMII_DIG_LP_ENA_REG(0), 0x400); + + /* + * 10) Configure the desire REFCLK_SEL (bit [10]) + * in register + */ + reg_write(SGMII_REF_CLK_SEL_REG(0), 0x400); + DEBUG_WR_REG(SGMII_REF_CLK_SEL_REG(0), 0x400); + + /* 11) Power up to the PU_PLL,PU_RX,PU_TX. */ + tmp = reg_read(SGMII_SERDES_CFG_REG(0)); + DEBUG_RD_REG(SGMII_SERDES_CFG_REG(0), tmp); + tmp |= 7; + reg_write(SGMII_SERDES_CFG_REG(0), tmp); + DEBUG_WR_REG(SGMII_SERDES_CFG_REG(0), tmp); + continue; + } + + if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SGMII0]) + sgmii_port = 0; + else if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SGMII1]) + sgmii_port = 1; + else if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SGMII2]) + sgmii_port = 2; + else if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SGMII3]) + sgmii_port = 3; + else + continue; + + /* + * 8) Configure the desire PHY_MODE (bits [7:5]) and + * REF_FREF_SEL (bits[4:0]) in the register + */ + reg_write(SGMII_PWR_PLL_CTRL_REG(sgmii_port), 0xF881); + DEBUG_WR_REG(SGMII_PWR_PLL_CTRL_REG(sgmii_port), 0xF881); + + /* 9) Configure the desire SEL_BITS (bits [11:0] in register */ + reg_write(SGMII_DIG_LP_ENA_REG(sgmii_port), 0); + DEBUG_WR_REG(SGMII_DIG_LP_ENA_REG(sgmii_port), 0); + + /* 10) Configure the desire REFCLK_SEL (bit [10]) in register */ + reg_write(SGMII_REF_CLK_SEL_REG(sgmii_port), 0x400); + DEBUG_WR_REG(SGMII_REF_CLK_SEL_REG(sgmii_port), 0x400); + + /* 11) Power up to the PU_PLL,PU_RX,PU_TX. */ + tmp = reg_read(SGMII_SERDES_CFG_REG(sgmii_port)); + DEBUG_RD_REG(SGMII_SERDES_CFG_REG(sgmii_port), tmp); + tmp |= 7; + reg_write(SGMII_SERDES_CFG_REG(sgmii_port), tmp); + DEBUG_WR_REG(SGMII_SERDES_CFG_REG(sgmii_port), tmp); + + } /* for each serdes lane */ + + /* Step 12 [PEX-Only] Last phase of PEX-PIPE Configuration */ + DEBUG_INIT_FULL_S("Steps 12: [PEX-Only] Last phase of PEX-PIPE Configuration\n"); + for (line_num = 0; line_num < max_serdes_lines; line_num++) { + /* for each serdes lane */ + + line_cfg = get_line_cfg(line_num, info); + + if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_UNCONNECTED]) + continue; + + if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_PEX]) { + pex_unit = line_num >> 2; + pex_line_num = line_num % 4; + if (0 == pex_line_num) { + reg_write(PEX_PHY_ACCESS_REG(pex_unit), + (0xC1 << 16) | 0x24); + DEBUG_WR_REG(PEX_PHY_ACCESS_REG(pex_unit), + (0xC1 << 16) | 0x24); + } + } + } + + /*--------------------------------------------------------------*/ + /* Step 13: Wait 15ms before checking results */ + DEBUG_INIT_FULL_S("Steps 13: Wait 15ms before checking results"); + mdelay(15); + tmp = 20; + while (tmp) { + status = MV_OK; + for (line_num = 0; line_num < max_serdes_lines; line_num++) { + u32 tmp; + line_cfg = get_line_cfg(line_num, info); + if (line_cfg == + serdes_cfg[line_num][SERDES_UNIT_UNCONNECTED]) + continue; + + if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_PEX]) + continue; + + if (line_cfg == serdes_cfg[line_num][SERDES_UNIT_SATA]) { + /* + * Port 0 for serdes lines 4,6, and port 1 + * for serdes lines 5 + */ + sata_port = line_num & 1; + + tmp = + reg_read(SATA_LP_PHY_EXT_STAT_REG + (sata_port)); + DEBUG_RD_REG(SATA_LP_PHY_EXT_STAT_REG + (sata_port), tmp); + if ((tmp & 0x7) != 0x7) + status = MV_ERROR; + continue; + } + + if (line_cfg == + serdes_cfg[line_num][SERDES_UNIT_QSGMII]) { + tmp = reg_read(SGMII_SERDES_STAT_REG(0)); + DEBUG_RD_REG(SGMII_SERDES_STAT_REG(0), tmp); + if ((tmp & 0x7) != 0x7) + status = MV_ERROR; + continue; + } + + if (line_cfg == + serdes_cfg[line_num][SERDES_UNIT_SGMII0]) + sgmii_port = 0; + else if (line_cfg == + serdes_cfg[line_num][SERDES_UNIT_SGMII1]) + sgmii_port = 1; + else if (line_cfg == + serdes_cfg[line_num][SERDES_UNIT_SGMII2]) + sgmii_port = 2; + else if (line_cfg == + serdes_cfg[line_num][SERDES_UNIT_SGMII3]) + sgmii_port = 3; + else + continue; + + tmp = reg_read(SGMII_SERDES_STAT_REG(sgmii_port)); + DEBUG_RD_REG(SGMII_SERDES_STAT_REG(sgmii_port), tmp); + if ((tmp & 0x7) != 0x7) + status = MV_ERROR; + } + + if (status == MV_OK) + break; + mdelay(5); + tmp--; + } + + /* + * Step14 [PEX-Only] In order to configure RC/EP mode please write + * to register 0x0060 bits + */ + DEBUG_INIT_FULL_S("Steps 14: [PEX-Only] In order to configure\n"); + for (pex_unit = 0; pex_unit < pex_max_unit_get(); pex_unit++) { + if (info->pex_mode[pex_unit] == PEX_BUS_DISABLED) + continue; + tmp = + reg_read(PEX_CAPABILITIES_REG(MV_PEX_UNIT_TO_IF(pex_unit))); + DEBUG_RD_REG(PEX_CAPABILITIES_REG(MV_PEX_UNIT_TO_IF(pex_unit)), + tmp); + tmp &= ~(0xf << 20); + if (info->pex_type == MV_PEX_ROOT_COMPLEX) + tmp |= (0x4 << 20); + else + tmp |= (0x1 << 20); + reg_write(PEX_CAPABILITIES_REG(MV_PEX_UNIT_TO_IF(pex_unit)), + tmp); + DEBUG_WR_REG(PEX_CAPABILITIES_REG(MV_PEX_UNIT_TO_IF(pex_unit)), + tmp); + } + + /* + * Step 15 [PEX-Only] Only for EP mode set to Zero bits 19 and 16 of + * register 0x1a60 + */ + DEBUG_INIT_FULL_S("Steps 15: [PEX-Only] In order to configure\n"); + for (pex_unit = 0; pex_unit < pex_max_unit_get(); pex_unit++) { + if (info->pex_mode[pex_unit] == PEX_BUS_DISABLED) + continue; + if (info->pex_type == MV_PEX_END_POINT) { + tmp = + reg_read(PEX_DBG_CTRL_REG + (MV_PEX_UNIT_TO_IF(pex_unit))); + DEBUG_RD_REG(PEX_DBG_CTRL_REG + (MV_PEX_UNIT_TO_IF(pex_unit)), tmp); + tmp &= 0xfff6ffff; + reg_write(PEX_DBG_CTRL_REG(MV_PEX_UNIT_TO_IF(pex_unit)), + tmp); + DEBUG_WR_REG(PEX_DBG_CTRL_REG + (MV_PEX_UNIT_TO_IF(pex_unit)), tmp); + } + } + + if (info->serdes_m_phy_change) { + MV_SERDES_CHANGE_M_PHY *serdes_m_phy_change; + u32 bus_speed; + for (line_num = 0; line_num < max_serdes_lines; line_num++) { + line_cfg = get_line_cfg(line_num, info); + if (line_cfg == + serdes_cfg[line_num][SERDES_UNIT_UNCONNECTED]) + continue; + serdes_m_phy_change = info->serdes_m_phy_change; + bus_speed = info->bus_speed & (1 << line_num); + while (serdes_m_phy_change->type != + SERDES_UNIT_UNCONNECTED) { + switch (serdes_m_phy_change->type) { + case SERDES_UNIT_PEX: + if (line_cfg != SERDES_UNIT_PEX) + break; + pex_unit = line_num >> 2; + pex_line_num = line_num % 4; + if (info->pex_mode[pex_unit] == + PEX_BUS_DISABLED) + break; + if ((info->pex_mode[pex_unit] == + PEX_BUS_MODE_X4) && pex_line_num) + break; + + if (bus_speed) { + reg_write(PEX_PHY_ACCESS_REG + (pex_unit), + (pex_line_num << 24) | + serdes_m_phy_change->val_hi_speed); + DEBUG_WR_REG(PEX_PHY_ACCESS_REG + (pex_unit), + (pex_line_num << + 24) | + serdes_m_phy_change->val_hi_speed); + } else { + reg_write(PEX_PHY_ACCESS_REG + (pex_unit), + (pex_line_num << 24) | + serdes_m_phy_change->val_low_speed); + DEBUG_WR_REG(PEX_PHY_ACCESS_REG + (pex_unit), + (pex_line_num << + 24) | + serdes_m_phy_change->val_low_speed); + } + break; + case SERDES_UNIT_SATA: + if (line_cfg != SERDES_UNIT_SATA) + break; + /* + * Port 0 for serdes lines 4,6, and + * port 1 for serdes lines 5 + */ + sata_port = line_num & 1; + if (bus_speed) { + reg_write(SATA_BASE_REG + (sata_port) | + serdes_m_phy_change->reg_hi_speed, + serdes_m_phy_change->val_hi_speed); + DEBUG_WR_REG(SATA_BASE_REG + (sata_port) | + serdes_m_phy_change->reg_hi_speed, + serdes_m_phy_change->val_hi_speed); + } else { + reg_write(SATA_BASE_REG + (sata_port) | + serdes_m_phy_change->reg_low_speed, + serdes_m_phy_change->val_low_speed); + DEBUG_WR_REG(SATA_BASE_REG + (sata_port) | + serdes_m_phy_change->reg_low_speed, + serdes_m_phy_change->val_low_speed); + } + break; + case SERDES_UNIT_SGMII0: + case SERDES_UNIT_SGMII1: + case SERDES_UNIT_SGMII2: + case SERDES_UNIT_SGMII3: + if (line_cfg == serdes_cfg[line_num] + [SERDES_UNIT_SGMII0]) + sgmii_port = 0; + else if (line_cfg == + serdes_cfg[line_num] + [SERDES_UNIT_SGMII1]) + sgmii_port = 1; + else if (line_cfg == + serdes_cfg[line_num] + [SERDES_UNIT_SGMII2]) + sgmii_port = 2; + else if (line_cfg == + serdes_cfg[line_num] + [SERDES_UNIT_SGMII3]) + sgmii_port = 3; + else + break; + if (bus_speed) { + reg_write(MV_ETH_REGS_BASE + (sgmii_port) | + serdes_m_phy_change->reg_hi_speed, + serdes_m_phy_change->val_hi_speed); + DEBUG_WR_REG(MV_ETH_REGS_BASE + (sgmii_port) | + serdes_m_phy_change->reg_hi_speed, + serdes_m_phy_change->val_hi_speed); + } else { + reg_write(MV_ETH_REGS_BASE + (sgmii_port) | + serdes_m_phy_change->reg_low_speed, + serdes_m_phy_change->val_low_speed); + DEBUG_WR_REG(MV_ETH_REGS_BASE + (sgmii_port) | + serdes_m_phy_change->reg_low_speed, + serdes_m_phy_change->val_low_speed); + } + break; + case SERDES_UNIT_QSGMII: + if (line_cfg != SERDES_UNIT_QSGMII) + break; + if (bus_speed) { + reg_write + (serdes_m_phy_change->reg_hi_speed, + serdes_m_phy_change->val_hi_speed); + DEBUG_WR_REG + (serdes_m_phy_change->reg_hi_speed, + serdes_m_phy_change->val_hi_speed); + } else { + reg_write + (serdes_m_phy_change->reg_low_speed, + serdes_m_phy_change->val_low_speed); + DEBUG_WR_REG + (serdes_m_phy_change->reg_low_speed, + serdes_m_phy_change->val_low_speed); + } + break; + default: + break; + } + serdes_m_phy_change++; + } + } + } + + /* Step 16 [PEX-Only] Training Enable */ + DEBUG_INIT_FULL_S("Steps 16: [PEX-Only] Training Enable"); + tmp = reg_read(SOC_CTRL_REG); + DEBUG_RD_REG(SOC_CTRL_REG, tmp); + tmp &= ~(0x0F); + for (pex_unit = 0; pex_unit < pex_max_unit_get(); pex_unit++) { + reg_write(PEX_CAUSE_REG(pex_unit), 0); + DEBUG_WR_REG(PEX_CAUSE_REG(pex_unit), 0); + if (info->pex_mode[pex_unit] != PEX_BUS_DISABLED) + tmp |= (0x1 << pex_unit); + } + reg_write(SOC_CTRL_REG, tmp); + DEBUG_WR_REG(SOC_CTRL_REG, tmp); + + /* Step 17: Speed change to target speed and width */ + { + u32 tmp_reg, tmp_pex_reg; + u32 addr; + u32 first_busno, next_busno; + u32 max_link_width = 0; + u32 neg_link_width = 0; + pex_if_num = pex_max_if_get(); + mdelay(150); + DEBUG_INIT_FULL_C("step 17: max_if= 0x", pex_if_num, 1); + next_busno = 0; + for (pex_if = 0; pex_if < pex_if_num; pex_if++) { + line_num = (pex_if <= 8) ? pex_if : 12; + line_cfg = get_line_cfg(line_num, info); + if (line_cfg != serdes_cfg[line_num][SERDES_UNIT_PEX]) + continue; + pex_unit = (pex_if < 9) ? (pex_if >> 2) : 3; + DEBUG_INIT_FULL_S("step 17: PEX"); + DEBUG_INIT_FULL_D(pex_if, 1); + DEBUG_INIT_FULL_C(" pex_unit= ", pex_unit, 1); + + if (info->pex_mode[pex_unit] == PEX_BUS_DISABLED) { + DEBUG_INIT_FULL_C("PEX disabled interface ", + pex_if, 1); + if (pex_if < 8) + pex_if += 3; + continue; + } + first_busno = next_busno; + if ((info->pex_type == MV_PEX_END_POINT) && + (0 == pex_if)) { + if ((pex_if < 8) && (info->pex_mode[pex_unit] == + PEX_BUS_MODE_X4)) + pex_if += 3; + continue; + } + + tmp = reg_read(PEX_DBG_STATUS_REG(pex_if)); + DEBUG_RD_REG(PEX_DBG_STATUS_REG(pex_if), tmp); + if ((tmp & 0x7f) == 0x7e) { + next_busno++; + tmp = reg_read(PEX_LINK_CAPABILITIES_REG(pex_if)); + max_link_width = tmp; + DEBUG_RD_REG((PEX_LINK_CAPABILITIES_REG + (pex_if)), tmp); + max_link_width = ((max_link_width >> 4) & 0x3F); + neg_link_width = + reg_read(PEX_LINK_CTRL_STATUS_REG(pex_if)); + DEBUG_RD_REG((PEX_LINK_CTRL_STATUS_REG(pex_if)), + neg_link_width); + neg_link_width = ((neg_link_width >> 20) & 0x3F); + if (max_link_width > neg_link_width) { + tmp &= ~(0x3F << 4); + tmp |= (neg_link_width << 4); + reg_write(PEX_LINK_CAPABILITIES_REG + (pex_if), tmp); + DEBUG_WR_REG((PEX_LINK_CAPABILITIES_REG + (pex_if)), tmp); + mdelay(1); /* wait 1ms before reading capability for speed */ + DEBUG_INIT_S("PEX"); + DEBUG_INIT_D(pex_if, 1); + DEBUG_INIT_C(": change width to X", + neg_link_width, 1); + } + tmp_pex_reg = + reg_read((PEX_CFG_DIRECT_ACCESS + (pex_if, + PEX_LINK_CAPABILITY_REG))); + DEBUG_RD_REG((PEX_CFG_DIRECT_ACCESS + (pex_if, + PEX_LINK_CAPABILITY_REG)), + tmp_pex_reg); + tmp_pex_reg &= (0xF); + if (tmp_pex_reg == 0x2) { + tmp_reg = + (reg_read + (PEX_CFG_DIRECT_ACCESS + (pex_if, + PEX_LINK_CTRL_STAT_REG)) & + 0xF0000) >> 16; + DEBUG_RD_REG(PEX_CFG_DIRECT_ACCESS + (pex_if, + PEX_LINK_CTRL_STAT_REG), + tmp_pex_reg); + /* check if the link established is GEN1 */ + if (tmp_reg == 0x1) { + pex_local_bus_num_set(pex_if, + first_busno); + pex_local_dev_num_set(pex_if, + 1); + + DEBUG_INIT_FULL_S("** Link is Gen1, check the EP capability\n"); + /* link is Gen1, check the EP capability */ + addr = + pex_cfg_read(pex_if, + first_busno, 0, + 0, + 0x34) & 0xFF; + DEBUG_INIT_FULL_C("pex_cfg_read: return addr=0x%x", + addr, 4); + if (addr == 0xff) { + DEBUG_INIT_FULL_C("pex_cfg_read: return 0xff -->PEX (%d): Detected No Link.", + pex_if, 1); + continue; + } + while ((pex_cfg_read + (pex_if, first_busno, 0, + 0, + addr) & 0xFF) != + 0x10) { + addr = + (pex_cfg_read + (pex_if, + first_busno, 0, 0, + addr) & 0xFF00) >> + 8; + } + if ((pex_cfg_read + (pex_if, first_busno, 0, 0, + addr + 0xC) & 0xF) >= + 0x2) { + tmp = + reg_read + (PEX_LINK_CTRL_STATUS2_REG + (pex_if)); + DEBUG_RD_REG + (PEX_LINK_CTRL_STATUS2_REG + (pex_if), tmp); + tmp &= ~(0x1 | 1 << 1); + tmp |= (1 << 1); + reg_write + (PEX_LINK_CTRL_STATUS2_REG + (pex_if), tmp); + DEBUG_WR_REG + (PEX_LINK_CTRL_STATUS2_REG + (pex_if), tmp); + + tmp = + reg_read + (PEX_CTRL_REG + (pex_if)); + DEBUG_RD_REG + (PEX_CTRL_REG + (pex_if), tmp); + tmp |= (1 << 10); + reg_write(PEX_CTRL_REG + (pex_if), + tmp); + DEBUG_WR_REG + (PEX_CTRL_REG + (pex_if), tmp); + mdelay(10); /* We need to wait 10ms before reading the PEX_DBG_STATUS_REG in order not to read the status of the former state */ + DEBUG_INIT_FULL_S + ("Gen2 client!\n"); + } else { + DEBUG_INIT_FULL_S + ("GEN1 client!\n"); + } + } + } + } else { + DEBUG_INIT_FULL_S("PEX"); + DEBUG_INIT_FULL_D(pex_if, 1); + DEBUG_INIT_FULL_S(" : Detected No Link. Status Reg(0x"); + DEBUG_INIT_FULL_D(PEX_DBG_STATUS_REG(pex_if), + 8); + DEBUG_INIT_FULL_C(") = 0x", tmp, 8); + } + + if ((pex_if < 8) && + (info->pex_mode[pex_unit] == PEX_BUS_MODE_X4)) + pex_if += 3; + } + } + + /* Step 18: update pex DEVICE ID */ + { + u32 devId; + pex_if_num = pex_max_if_get(); + ctrl_mode = ctrl_model_get(); + for (pex_if = 0; pex_if < pex_if_num; pex_if++) { + pex_unit = (pex_if < 9) ? (pex_if >> 2) : 3; + if (info->pex_mode[pex_unit] == PEX_BUS_DISABLED) { + if ((pex_if < 8) && + (info->pex_mode[pex_unit] == PEX_BUS_MODE_X4)) + pex_if += 3; + continue; + } + + devId = reg_read(PEX_CFG_DIRECT_ACCESS( + pex_if, PEX_DEVICE_AND_VENDOR_ID)); + devId &= 0xFFFF; + devId |= ((ctrl_mode << 16) & 0xffff0000); + DEBUG_INIT_S("Update Device ID PEX"); + DEBUG_INIT_D(pex_if, 1); + DEBUG_INIT_D(devId, 8); + DEBUG_INIT_S("\n"); + reg_write(PEX_CFG_DIRECT_ACCESS + (pex_if, PEX_DEVICE_AND_VENDOR_ID), devId); + if ((pex_if < 8) && + (info->pex_mode[pex_unit] == PEX_BUS_MODE_X4)) + pex_if += 3; + } + DEBUG_INIT_S("Update PEX Device ID 0x"); + DEBUG_INIT_D(ctrl_mode, 4); + DEBUG_INIT_S("0\n"); + } + tmp = reg_read(PEX_DBG_STATUS_REG(0)); + DEBUG_RD_REG(PEX_DBG_STATUS_REG(0), tmp); + + DEBUG_INIT_S(ENDED_OK); + return MV_OK; +} + +/* PEX configuration space read write */ + +/* + * pex_cfg_read - Read from configuration space + * + * DESCRIPTION: + * This function performs a 32 bit read from PEX configuration space. + * It supports both type 0 and type 1 of Configuration Transactions + * (local and over bridge). In order to read from local bus segment, use + * bus number retrieved from mvPexLocalBusNumGet(). Other bus numbers + * will result configuration transaction of type 1 (over bridge). + * + * INPUT: + * pex_if - PEX interface number. + * bus - PEX segment bus number. + * dev - PEX device number. + * func - Function number. + * offss - Register offset. + * + * OUTPUT: + * None. + * + * RETURN: + * 32bit register data, 0xffffffff on error + * + */ +u32 pex_cfg_read(u32 pex_if, u32 bus, u32 dev, u32 func, u32 offs) +{ + u32 pex_data = 0; + u32 local_dev, local_bus; + u32 val; + + if (pex_if >= MV_PEX_MAX_IF) + return 0xFFFFFFFF; + + if (dev >= MAX_PEX_DEVICES) { + DEBUG_INIT_C("pex_cfg_read: ERR. device number illigal ", dev, + 1); + return 0xFFFFFFFF; + } + + if (func >= MAX_PEX_FUNCS) { + DEBUG_INIT_C("pex_cfg_read: ERR. function num illigal ", func, + 1); + return 0xFFFFFFFF; + } + + if (bus >= MAX_PEX_BUSSES) { + DEBUG_INIT_C("pex_cfg_read: ERR. bus number illigal ", bus, 1); + return MV_ERROR; + } + val = reg_read(PEX_STATUS_REG(pex_if)); + + local_dev = + ((val & PXSR_PEX_DEV_NUM_MASK) >> PXSR_PEX_DEV_NUM_OFFS); + local_bus = + ((val & PXSR_PEX_BUS_NUM_MASK) >> PXSR_PEX_BUS_NUM_OFFS); + + /* Speed up the process. In case on no link, return MV_ERROR */ + if ((dev != local_dev) || (bus != local_bus)) { + pex_data = reg_read(PEX_STATUS_REG(pex_if)); + + if ((pex_data & PXSR_DL_DOWN)) + return MV_ERROR; + } + + /* + * In PCI Express we have only one device number + * and this number is the first number we encounter else that the + * local_dev spec pex define return on config read/write on any device + */ + if (bus == local_bus) { + if (local_dev == 0) { + /* + * If local dev is 0 then the first number we encounter + * after 0 is 1 + */ + if ((dev != 1) && (dev != local_dev)) + return MV_ERROR; + } else { + /* + * If local dev is not 0 then the first number we + * encounter is 0 + */ + if ((dev != 0) && (dev != local_dev)) + return MV_ERROR; + } + } + + /* Creating PEX address to be passed */ + pex_data = (bus << PXCAR_BUS_NUM_OFFS); + pex_data |= (dev << PXCAR_DEVICE_NUM_OFFS); + pex_data |= (func << PXCAR_FUNC_NUM_OFFS); + pex_data |= (offs & PXCAR_REG_NUM_MASK); /* lgacy register space */ + /* extended register space */ + pex_data |= (((offs & PXCAR_REAL_EXT_REG_NUM_MASK) >> + PXCAR_REAL_EXT_REG_NUM_OFFS) << PXCAR_EXT_REG_NUM_OFFS); + + pex_data |= PXCAR_CONFIG_EN; + + /* Write the address to the PEX configuration address register */ + reg_write(PEX_CFG_ADDR_REG(pex_if), pex_data); + + /* + * In order to let the PEX controller absorbed the address of the read + * transaction we perform a validity check that the address was written + */ + if (pex_data != reg_read(PEX_CFG_ADDR_REG(pex_if))) + return MV_ERROR; + + /* cleaning Master Abort */ + reg_bit_set(PEX_CFG_DIRECT_ACCESS(pex_if, PEX_STATUS_AND_COMMAND), + PXSAC_MABORT); + /* Read the Data returned in the PEX Data register */ + pex_data = reg_read(PEX_CFG_DATA_REG(pex_if)); + + DEBUG_INIT_FULL_C(" --> ", pex_data, 4); + + return pex_data; +} + +/* + * pex_local_bus_num_set - Set PEX interface local bus number. + * + * DESCRIPTION: + * This function sets given PEX interface its local bus number. + * Note: In case the PEX interface is PEX-X, the information is read-only. + * + * INPUT: + * pex_if - PEX interface number. + * bus_num - Bus number. + * + * OUTPUT: + * None. + * + * RETURN: + * MV_NOT_ALLOWED in case PEX interface is PEX-X. + * MV_BAD_PARAM on bad parameters , + * otherwise MV_OK + * + */ +int pex_local_bus_num_set(u32 pex_if, u32 bus_num) +{ + u32 val; + + if (bus_num >= MAX_PEX_BUSSES) { + DEBUG_INIT_C("pex_local_bus_num_set: ERR. bus number illigal %d\n", + bus_num, 4); + return MV_ERROR; + } + + val = reg_read(PEX_STATUS_REG(pex_if)); + val &= ~PXSR_PEX_BUS_NUM_MASK; + val |= (bus_num << PXSR_PEX_BUS_NUM_OFFS) & PXSR_PEX_BUS_NUM_MASK; + reg_write(PEX_STATUS_REG(pex_if), val); + + return MV_OK; +} + +/* + * pex_local_dev_num_set - Set PEX interface local device number. + * + * DESCRIPTION: + * This function sets given PEX interface its local device number. + * Note: In case the PEX interface is PEX-X, the information is read-only. + * + * INPUT: + * pex_if - PEX interface number. + * dev_num - Device number. + * + * OUTPUT: + * None. + * + * RETURN: + * MV_NOT_ALLOWED in case PEX interface is PEX-X. + * MV_BAD_PARAM on bad parameters , + * otherwise MV_OK + * + */ +int pex_local_dev_num_set(u32 pex_if, u32 dev_num) +{ + u32 val; + + if (pex_if >= MV_PEX_MAX_IF) + return MV_BAD_PARAM; + + val = reg_read(PEX_STATUS_REG(pex_if)); + val &= ~PXSR_PEX_DEV_NUM_MASK; + val |= (dev_num << PXSR_PEX_DEV_NUM_OFFS) & PXSR_PEX_DEV_NUM_MASK; + reg_write(PEX_STATUS_REG(pex_if), val); + + return MV_OK; +} diff --git a/arch/arm/mvebu-common/serdes/high_speed_env_spec.c b/arch/arm/mvebu-common/serdes/high_speed_env_spec.c new file mode 100644 index 0000000..115ec2c --- /dev/null +++ b/arch/arm/mvebu-common/serdes/high_speed_env_spec.c @@ -0,0 +1,185 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <i2c.h> +#include <spl.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> + +#include "high_speed_env_spec.h" + +MV_SERDES_CHANGE_M_PHY serdes_change_m_phy[] = { + /* SERDES TYPE, Low REG OFFS, Low REG VALUE, Hi REG OFS, Hi REG VALUE */ + { + /* PEX: Change of Slew Rate port0 */ + SERDES_UNIT_PEX, 0x0, + (0x0F << 16) | 0x2a21, 0x0, (0x0F << 16) | 0x2a21 + }, { + /* PEX: Change PLL BW port0 */ + SERDES_UNIT_PEX, 0x0, + (0x4F << 16) | 0x6219, 0x0, (0x4F << 16) | 0x6219 + }, { + /* SATA: Slew rate change port 0 */ + SERDES_UNIT_SATA, 0x0083C, 0x8a31, 0x0083C, 0x8a31 + }, { + /* SATA: Slew rate change port 0 */ + SERDES_UNIT_SATA, 0x00834, 0xc928, 0x00834, 0xc928 + }, { + /* SATA: Slew rate change port 0 */ + SERDES_UNIT_SATA, 0x00838, 0x30f0, 0x00838, 0x30f0 + }, { + /* SATA: Slew rate change port 0 */ + SERDES_UNIT_SATA, 0x00840, 0x30f5, 0x00840, 0x30f5 + }, { + /* SGMII: FFE setting Port0 */ + SERDES_UNIT_SGMII0, 0x00E18, 0x989F, 0x00E18, 0x989F + }, { + /* SGMII: SELMUP and SELMUF Port0 */ + SERDES_UNIT_SGMII0, 0x00E38, 0x10FA, 0x00E38, 0x10FA + }, { + /* SGMII: Amplitude new setting gen2 Port3 */ + SERDES_UNIT_SGMII0, 0x00E34, 0xC968, 0x00E34, 0xC66C + }, { + /* QSGMII: Amplitude and slew rate change */ + SERDES_UNIT_QSGMII, 0x72E34, 0xaa58, 0x72E34, 0xaa58 + }, { + /* QSGMII: SELMUP and SELMUF */ + SERDES_UNIT_QSGMII, 0x72e38, 0x10aF, 0x72e38, 0x10aF + }, { + /* QSGMII: 0x72e18 */ + SERDES_UNIT_QSGMII, 0x72e18, 0x98AC, 0x72e18, 0x98AC + }, { + /* Null terminated */ + SERDES_UNIT_UNCONNECTED, 0, 0 + } +}; + +MV_BIN_SERDES_CFG db88f78xx0_serdes_cfg[] = { + /* Z1B */ + {MV_PEX_ROOT_COMPLEX, 0x32221111, 0x11111111, + {PEX_BUS_MODE_X1, PEX_BUS_DISABLED, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4}, + 0x0030, serdes_change_m_phy}, /* Default */ + {MV_PEX_ROOT_COMPLEX, 0x31211111, 0x11111111, + {PEX_BUS_MODE_X1, PEX_BUS_MODE_X1, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4}, + 0x0030, serdes_change_m_phy}, /* PEX module */ + /* Z1A */ + {MV_PEX_ROOT_COMPLEX, 0x32220000, 0x00000000, + {PEX_BUS_DISABLED, PEX_BUS_DISABLED, PEX_BUS_DISABLED, + PEX_BUS_DISABLED}, 0x0030, serdes_change_m_phy}, /* Default - Z1A */ + {MV_PEX_ROOT_COMPLEX, 0x31210000, 0x00000000, + {PEX_BUS_DISABLED, PEX_BUS_MODE_X1, PEX_BUS_DISABLED, PEX_BUS_DISABLED}, + 0x0030, serdes_change_m_phy} /* PEX module - Z1A */ +}; + +MV_BIN_SERDES_CFG db88f78xx0rev2_serdes_cfg[] = { + /* A0 */ + {MV_PEX_ROOT_COMPLEX, 0x33221111, 0x11111111, + {PEX_BUS_MODE_X1, PEX_BUS_DISABLED, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4}, + 0x0030, serdes_change_m_phy}, /* Default: No Pex module, PEX0 x1, disabled */ + {MV_PEX_ROOT_COMPLEX, 0x33211111, 0x11111111, + {PEX_BUS_MODE_X1, PEX_BUS_MODE_X1, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4}, + 0x0030, serdes_change_m_phy}, /* Pex module, PEX0 x1, PEX1 x1 */ + {MV_PEX_ROOT_COMPLEX, 0x33221111, 0x11111111, + {PEX_BUS_MODE_X4, PEX_BUS_DISABLED, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4}, + 0x0030, serdes_change_m_phy}, /* no Pex module, PEX0 x4, PEX1 disabled */ + {MV_PEX_ROOT_COMPLEX, 0x33211111, 0x11111111, + {PEX_BUS_MODE_X4, PEX_BUS_MODE_X1, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4}, + 0x0030, serdes_change_m_phy}, /* Pex module, PEX0 x4, PEX1 x1 */ + {MV_PEX_ROOT_COMPLEX, 0x11111111, 0x11111111, + {PEX_BUS_MODE_X1, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4}, + 0x0030, serdes_change_m_phy}, /* Pex module, PEX0 x1, PEX1 x4 */ + {MV_PEX_ROOT_COMPLEX, 0x11111111, 0x11111111, + {PEX_BUS_MODE_X4, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4}, + 0x0030, serdes_change_m_phy}, /* Pex module, PEX0 x4, PEX1 x4 */ +}; + +MV_BIN_SERDES_CFG rd78460nas_serdes_cfg[] = { + {MV_PEX_ROOT_COMPLEX, 0x00223001, 0x11111111, + {PEX_BUS_MODE_X1, PEX_BUS_DISABLED, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4}, + 0x0030, serdes_change_m_phy}, /* Default */ + {MV_PEX_ROOT_COMPLEX, 0x33320201, 0x11111111, + {PEX_BUS_MODE_X1, PEX_BUS_DISABLED, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4}, + 0x00f4, serdes_change_m_phy}, /* Switch module */ +}; + +MV_BIN_SERDES_CFG rd78460_serdes_cfg[] = { + {MV_PEX_ROOT_COMPLEX, 0x22321111, 0x00000000, + {PEX_BUS_MODE_X4, PEX_BUS_DISABLED, PEX_BUS_DISABLED, PEX_BUS_DISABLED}, + 0x0010, serdes_change_m_phy}, /* CPU0 */ + {MV_PEX_ROOT_COMPLEX, 0x00321111, 0x00000000, + {PEX_BUS_MODE_X4, PEX_BUS_DISABLED, PEX_BUS_DISABLED, PEX_BUS_DISABLED}, + 0x0010, serdes_change_m_phy} /* CPU1-3 */ +}; + +MV_BIN_SERDES_CFG rd78460server_rev2_serdes_cfg[] = { + {MV_PEX_ROOT_COMPLEX, 0x00321111, 0x00000000, + {PEX_BUS_MODE_X4, PEX_BUS_DISABLED, PEX_BUS_DISABLED, PEX_BUS_DISABLED}, + 0x0010, serdes_change_m_phy}, /* CPU0 */ + {MV_PEX_ROOT_COMPLEX, 0x00321111, 0x00000000, + {PEX_BUS_MODE_X4, PEX_BUS_DISABLED, PEX_BUS_DISABLED, PEX_BUS_DISABLED}, + 0x0010, serdes_change_m_phy} /* CPU1-3 */ +}; + +MV_BIN_SERDES_CFG db78X60pcac_serdes_cfg[] = { + {MV_PEX_END_POINT, 0x22321111, 0x00000000, + {PEX_BUS_MODE_X4, PEX_BUS_DISABLED, PEX_BUS_DISABLED, PEX_BUS_DISABLED}, + 0x0010, serdes_change_m_phy} /* Default */ +}; + +MV_BIN_SERDES_CFG db78X60pcacrev2_serdes_cfg[] = { + {MV_PEX_END_POINT, 0x23321111, 0x00000000, + {PEX_BUS_MODE_X4, PEX_BUS_DISABLED, PEX_BUS_DISABLED, PEX_BUS_DISABLED}, + 0x0010, serdes_change_m_phy} /* Default */ +}; + +MV_BIN_SERDES_CFG fpga88f78xx0_serdes_cfg[] = { + {MV_PEX_ROOT_COMPLEX, 0x00000000, 0x00000000, + {PEX_BUS_DISABLED, PEX_BUS_DISABLED, PEX_BUS_DISABLED, PEX_BUS_DISABLED}, + 0x0000, serdes_change_m_phy} /* No PEX in FPGA */ +}; + +MV_BIN_SERDES_CFG db78X60amc_serdes_cfg[] = { + {MV_PEX_ROOT_COMPLEX, 0x33111111, 0x00010001, + {PEX_BUS_MODE_X4, PEX_BUS_MODE_X1, PEX_BUS_MODE_X1, PEX_BUS_MODE_X1}, + 0x0030, serdes_change_m_phy} /* Default */ +}; + +/* + * ARMADA-XP CUSTOMER BOARD + */ +MV_BIN_SERDES_CFG rd78460customer_serdes_cfg[] = { + {MV_PEX_ROOT_COMPLEX, 0x00223001, 0x11111111, + {PEX_BUS_MODE_X1, PEX_BUS_DISABLED, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4}, + 0x00000030, serdes_change_m_phy}, /* Default */ + {MV_PEX_ROOT_COMPLEX, 0x33320201, 0x11111111, + {PEX_BUS_MODE_X1, PEX_BUS_DISABLED, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4}, + 0x00000030, serdes_change_m_phy}, /* Switch module */ +}; + +MV_BIN_SERDES_CFG rd78460AXP_GP_serdes_cfg[] = { + {MV_PEX_ROOT_COMPLEX, 0x00223001, 0x11111111, + {PEX_BUS_MODE_X1, PEX_BUS_DISABLED, PEX_BUS_MODE_X4, PEX_BUS_MODE_X4}, + 0x0030, serdes_change_m_phy} /* Default */ +}; + +MV_BIN_SERDES_CFG *serdes_info_tbl[] = { + db88f78xx0_serdes_cfg, + rd78460_serdes_cfg, + db78X60pcac_serdes_cfg, + fpga88f78xx0_serdes_cfg, + db88f78xx0rev2_serdes_cfg, + rd78460nas_serdes_cfg, + db78X60amc_serdes_cfg, + db78X60pcacrev2_serdes_cfg, + rd78460server_rev2_serdes_cfg, + rd78460AXP_GP_serdes_cfg, + rd78460customer_serdes_cfg +}; + +u8 rd78460gp_twsi_dev[] = { 0x4C, 0x4D, 0x4E }; +u8 db88f78xx0rev2_twsi_dev[] = { 0x4C, 0x4D, 0x4E, 0x4F }; diff --git a/arch/arm/mvebu-common/serdes/high_speed_env_spec.h b/arch/arm/mvebu-common/serdes/high_speed_env_spec.h new file mode 100644 index 0000000..e5aa1b0 --- /dev/null +++ b/arch/arm/mvebu-common/serdes/high_speed_env_spec.h @@ -0,0 +1,87 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef __HIGHSPEED_ENV_SPEC_H +#define __HIGHSPEED_ENV_SPEC_H + +#include "../../../drivers/ddr/mvebu/ddr3_hw_training.h" + +typedef enum { + SERDES_UNIT_UNCONNECTED = 0x0, + SERDES_UNIT_PEX = 0x1, + SERDES_UNIT_SATA = 0x2, + SERDES_UNIT_SGMII0 = 0x3, + SERDES_UNIT_SGMII1 = 0x4, + SERDES_UNIT_SGMII2 = 0x5, + SERDES_UNIT_SGMII3 = 0x6, + SERDES_UNIT_QSGMII = 0x7, + SERDES_UNIT_SETM = 0x8, + SERDES_LAST_UNIT +} MV_BIN_SERDES_UNIT_INDX; + + +typedef enum { + PEX_BUS_DISABLED = 0, + PEX_BUS_MODE_X1 = 1, + PEX_BUS_MODE_X4 = 2, + PEX_BUS_MODE_X8 = 3 +} MV_PEX_UNIT_CFG; + +typedef enum pex_type { + MV_PEX_ROOT_COMPLEX, /* root complex device */ + MV_PEX_END_POINT /* end point device */ +} MV_PEX_TYPE; + +typedef struct serdes_change_m_phy { + MV_BIN_SERDES_UNIT_INDX type; + u32 reg_low_speed; + u32 val_low_speed; + u32 reg_hi_speed; + u32 val_hi_speed; +} MV_SERDES_CHANGE_M_PHY; + +/* + * Configuration per SERDES line. Each nibble is MV_SERDES_LINE_TYPE + */ +typedef struct board_serdes_conf { + MV_PEX_TYPE pex_type; /* MV_PEX_ROOT_COMPLEX MV_PEX_END_POINT */ + u32 line0_7; /* Lines 0 to 7 SERDES MUX one nibble per line */ + u32 line8_15; /* Lines 8 to 15 SERDES MUX one nibble per line */ + MV_PEX_UNIT_CFG pex_mode[4]; + + /* + * Bus speed - one bit per SERDES line: + * Low speed (0) High speed (1) + * PEX 2.5 G (10 bit) 5 G (20 bit) + * SATA 1.5 G 3 G + * SGMII 1.25 Gbps 3.125 Gbps + */ + u32 bus_speed; + + MV_SERDES_CHANGE_M_PHY *serdes_m_phy_change; +} MV_BIN_SERDES_CFG; + + +#define BIN_SERDES_CFG { \ + {0, 1, -1 , -1, -1, -1, -1, -1, -1}, /* Lane 0 */ \ + {0, 1, -1 , -1, -1, -1, -1, -1, 2}, /* Lane 1 */ \ + {0, 1, -1 , 2, -1, -1, -1, -1, 3}, /* Lane 2 */ \ + {0, 1, -1 , -1, 2, -1, -1, 3, -1}, /* Lane 3 */ \ + {0, 1, 2 , -1, -1, 3, -1, -1, 4}, /* Lane 4 */ \ + {0, 1, 2 , -1, 3, -1, -1, 4, -1}, /* Lane 5 */ \ + {0, 1, 2 , 4, -1, 3, -1, -1, -1}, /* Lane 6 */ \ + {0, 1, -1 , 2, -1, -1, 3, -1, 4}, /* Lane 7*/ \ + {0, 1, -1 , -1, -1, -1, -1, -1, -1}, /* Lane 8 */ \ + {0, 1, -1 , -1, -1, -1, -1, -1, -1}, /* Lane 9 */ \ + {0, 1, -1 , -1, -1, -1, -1, -1, -1}, /* Lane 10 */ \ + {0, 1, -1 , -1, -1, -1, -1, -1, -1}, /* Lane 11 */ \ + {0, 1, -1 , -1, -1, -1, -1, -1, -1}, /* Lane 12 */ \ + {0, 1, -1 , -1, -1, -1, -1, -1, -1}, /* Lane 13 */ \ + {0, 1, -1 , -1, -1, -1, -1, -1, -1}, /* Lane 14 */ \ + {0, 1, -1 , -1, -1, -1, -1, -1, -1}, /* Lane 15 */ \ +} + +#endif /* __HIGHSPEED_ENV_SPEC_H */ |