summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--board/atmel/at91cap9adk/nand.c37
-rw-r--r--board/atmel/at91sam9260ek/nand.c37
-rw-r--r--board/atmel/at91sam9261ek/nand.c37
-rw-r--r--board/atmel/at91sam9263ek/nand.c37
-rw-r--r--board/atmel/at91sam9rlek/nand.c37
-rw-r--r--board/freescale/m5373evb/nand.c64
-rw-r--r--board/quad100hd/nand.c36
-rw-r--r--board/socrates/nand.c84
-rw-r--r--common/env_onenand.c10
-rw-r--r--cpu/arm920t/s3c24x0/nand.c64
-rw-r--r--drivers/mtd/onenand/onenand_base.c131
-rw-r--r--drivers/mtd/onenand/onenand_bbt.c4
-rw-r--r--include/linux/mtd/mtd.h16
-rw-r--r--include/linux/mtd/nand.h16
-rw-r--r--include/linux/mtd/nand_legacy.h12
-rw-r--r--include/linux/mtd/onenand.h19
16 files changed, 307 insertions, 334 deletions
diff --git a/board/atmel/at91cap9adk/nand.c b/board/atmel/at91cap9adk/nand.c
index 0432ef1..1dec558 100644
--- a/board/atmel/at91cap9adk/nand.c
+++ b/board/atmel/at91cap9adk/nand.c
@@ -37,36 +37,35 @@
#define MASK_ALE (1 << 21) /* our ALE is AD21 */
#define MASK_CLE (1 << 22) /* our CLE is AD22 */
-static void at91cap9adk_nand_hwcontrol(struct mtd_info *mtd, int cmd)
+static void at91cap9adk_nand_hwcontrol(struct mtd_info *mtd,
+ int cmd, unsigned int ctrl)
{
struct nand_chip *this = mtd->priv;
- ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
- IO_ADDR_W &= ~(MASK_ALE|MASK_CLE);
- switch (cmd) {
- case NAND_CTL_SETCLE:
- IO_ADDR_W |= MASK_CLE;
- break;
- case NAND_CTL_SETALE:
- IO_ADDR_W |= MASK_ALE;
- break;
- case NAND_CTL_CLRNCE:
- at91_set_gpio_value(AT91_PIN_PD15, 1);
- break;
- case NAND_CTL_SETNCE:
- at91_set_gpio_value(AT91_PIN_PD15, 0);
- break;
+ if (ctrl & NAND_CTRL_CHANGE) {
+ ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
+ IO_ADDR_W &= ~(MASK_ALE | MASK_CLE);
+
+ if (ctrl & NAND_CLE)
+ IO_ADDR_W |= MASK_CLE;
+ if (ctrl & NAND_ALE)
+ IO_ADDR_W |= MASK_ALE;
+
+ at91_set_gpio_value(AT91_PIN_PD15, !(ctrl & NAND_NCE));
+ this->IO_ADDR_W = (void *) IO_ADDR_W;
}
- this->IO_ADDR_W = (void *) IO_ADDR_W;
+
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, this->IO_ADDR_W);
}
int board_nand_init(struct nand_chip *nand)
{
- nand->eccmode = NAND_ECC_SOFT;
+ nand->ecc.mode = NAND_ECC_SOFT;
#ifdef CFG_NAND_DBW_16
nand->options = NAND_BUSWIDTH_16;
#endif
- nand->hwcontrol = at91cap9adk_nand_hwcontrol;
+ nand->cmd_ctrl = at91cap9adk_nand_hwcontrol;
nand->chip_delay = 20;
return 0;
diff --git a/board/atmel/at91sam9260ek/nand.c b/board/atmel/at91sam9260ek/nand.c
index 9738f0f..665e35c 100644
--- a/board/atmel/at91sam9260ek/nand.c
+++ b/board/atmel/at91sam9260ek/nand.c
@@ -37,27 +37,26 @@
#define MASK_ALE (1 << 21) /* our ALE is AD21 */
#define MASK_CLE (1 << 22) /* our CLE is AD22 */
-static void at91sam9260ek_nand_hwcontrol(struct mtd_info *mtd, int cmd)
+static void at91sam9260ek_nand_hwcontrol(struct mtd_info *mtd,
+ int cmd, unsigned int ctrl)
{
struct nand_chip *this = mtd->priv;
- ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
- IO_ADDR_W &= ~(MASK_ALE|MASK_CLE);
- switch (cmd) {
- case NAND_CTL_SETCLE:
- IO_ADDR_W |= MASK_CLE;
- break;
- case NAND_CTL_SETALE:
- IO_ADDR_W |= MASK_ALE;
- break;
- case NAND_CTL_CLRNCE:
- at91_set_gpio_value(AT91_PIN_PC14, 1);
- break;
- case NAND_CTL_SETNCE:
- at91_set_gpio_value(AT91_PIN_PC14, 0);
- break;
+ if (ctrl & NAND_CTRL_CHANGE) {
+ ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
+ IO_ADDR_W &= ~(MASK_ALE | MASK_CLE);
+
+ if (ctrl & NAND_CLE)
+ IO_ADDR_W |= MASK_CLE;
+ if (ctrl & NAND_ALE)
+ IO_ADDR_W |= MASK_ALE;
+
+ at91_set_gpio_value(AT91_PIN_PC14, !(ctrl & NAND_NCE));
+ this->IO_ADDR_W = (void *) IO_ADDR_W;
}
- this->IO_ADDR_W = (void *) IO_ADDR_W;
+
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, this->IO_ADDR_W);
}
static int at91sam9260ek_nand_ready(struct mtd_info *mtd)
@@ -67,11 +66,11 @@ static int at91sam9260ek_nand_ready(struct mtd_info *mtd)
int board_nand_init(struct nand_chip *nand)
{
- nand->eccmode = NAND_ECC_SOFT;
+ nand->ecc.mode = NAND_ECC_SOFT;
#ifdef CFG_NAND_DBW_16
nand->options = NAND_BUSWIDTH_16;
#endif
- nand->hwcontrol = at91sam9260ek_nand_hwcontrol;
+ nand->cmd_ctrl = at91sam9260ek_nand_hwcontrol;
nand->dev_ready = at91sam9260ek_nand_ready;
nand->chip_delay = 20;
diff --git a/board/atmel/at91sam9261ek/nand.c b/board/atmel/at91sam9261ek/nand.c
index 35b26db..fccb9d7 100644
--- a/board/atmel/at91sam9261ek/nand.c
+++ b/board/atmel/at91sam9261ek/nand.c
@@ -37,27 +37,26 @@
#define MASK_ALE (1 << 22) /* our ALE is AD22 */
#define MASK_CLE (1 << 21) /* our CLE is AD21 */
-static void at91sam9261ek_nand_hwcontrol(struct mtd_info *mtd, int cmd)
+static void at91sam9261ek_nand_hwcontrol(struct mtd_info *mtd,
+ int cmd, unsigned int ctrl)
{
struct nand_chip *this = mtd->priv;
- ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
- IO_ADDR_W &= ~(MASK_ALE|MASK_CLE);
- switch (cmd) {
- case NAND_CTL_SETCLE:
- IO_ADDR_W |= MASK_CLE;
- break;
- case NAND_CTL_SETALE:
- IO_ADDR_W |= MASK_ALE;
- break;
- case NAND_CTL_CLRNCE:
- at91_set_gpio_value(AT91_PIN_PC14, 1);
- break;
- case NAND_CTL_SETNCE:
- at91_set_gpio_value(AT91_PIN_PC14, 0);
- break;
+ if (ctrl & NAND_CTRL_CHANGE) {
+ ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
+ IO_ADDR_W &= ~(MASK_ALE | MASK_CLE);
+
+ if (ctrl & NAND_CLE)
+ IO_ADDR_W |= MASK_CLE;
+ if (ctrl & NAND_ALE)
+ IO_ADDR_W |= MASK_ALE;
+
+ at91_set_gpio_value(AT91_PIN_PC14, !(ctrl & NAND_NCE));
+ this->IO_ADDR_W = (void *) IO_ADDR_W;
}
- this->IO_ADDR_W = (void *) IO_ADDR_W;
+
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, this->IO_ADDR_W);
}
static int at91sam9261ek_nand_ready(struct mtd_info *mtd)
@@ -67,11 +66,11 @@ static int at91sam9261ek_nand_ready(struct mtd_info *mtd)
int board_nand_init(struct nand_chip *nand)
{
- nand->eccmode = NAND_ECC_SOFT;
+ nand->ecc.mode = NAND_ECC_SOFT;
#ifdef CFG_NAND_DBW_16
nand->options = NAND_BUSWIDTH_16;
#endif
- nand->hwcontrol = at91sam9261ek_nand_hwcontrol;
+ nand->cmd_ctrl = at91sam9261ek_nand_hwcontrol;
nand->dev_ready = at91sam9261ek_nand_ready;
nand->chip_delay = 20;
diff --git a/board/atmel/at91sam9263ek/nand.c b/board/atmel/at91sam9263ek/nand.c
index 5079972..250ec7f 100644
--- a/board/atmel/at91sam9263ek/nand.c
+++ b/board/atmel/at91sam9263ek/nand.c
@@ -37,27 +37,26 @@
#define MASK_ALE (1 << 21) /* our ALE is AD21 */
#define MASK_CLE (1 << 22) /* our CLE is AD22 */
-static void at91sam9263ek_nand_hwcontrol(struct mtd_info *mtd, int cmd)
+static void at91sam9263ek_nand_hwcontrol(struct mtd_info *mtd,
+ int cmd, unsigned int ctrl)
{
struct nand_chip *this = mtd->priv;
- ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
- IO_ADDR_W &= ~(MASK_ALE|MASK_CLE);
- switch (cmd) {
- case NAND_CTL_SETCLE:
- IO_ADDR_W |= MASK_CLE;
- break;
- case NAND_CTL_SETALE:
- IO_ADDR_W |= MASK_ALE;
- break;
- case NAND_CTL_CLRNCE:
- at91_set_gpio_value(AT91_PIN_PD15, 1);
- break;
- case NAND_CTL_SETNCE:
- at91_set_gpio_value(AT91_PIN_PD15, 0);
- break;
+ if (ctrl & NAND_CTRL_CHANGE) {
+ ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
+ IO_ADDR_W &= ~(MASK_ALE | MASK_CLE);
+
+ if (ctrl & NAND_CLE)
+ IO_ADDR_W |= MASK_CLE;
+ if (ctrl & NAND_ALE)
+ IO_ADDR_W |= MASK_ALE;
+
+ at91_set_gpio_value(AT91_PIN_PD15, !(ctrl & NAND_NCE));
+ this->IO_ADDR_W = (void *) IO_ADDR_W;
}
- this->IO_ADDR_W = (void *) IO_ADDR_W;
+
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, this->IO_ADDR_W);
}
static int at91sam9263ek_nand_ready(struct mtd_info *mtd)
@@ -67,11 +66,11 @@ static int at91sam9263ek_nand_ready(struct mtd_info *mtd)
int board_nand_init(struct nand_chip *nand)
{
- nand->eccmode = NAND_ECC_SOFT;
+ nand->ecc.mode = NAND_ECC_SOFT;
#ifdef CFG_NAND_DBW_16
nand->options = NAND_BUSWIDTH_16;
#endif
- nand->hwcontrol = at91sam9263ek_nand_hwcontrol;
+ nand->cmd_ctrl = at91sam9263ek_nand_hwcontrol;
nand->dev_ready = at91sam9263ek_nand_ready;
nand->chip_delay = 20;
diff --git a/board/atmel/at91sam9rlek/nand.c b/board/atmel/at91sam9rlek/nand.c
index 5af1a31..eb342b8 100644
--- a/board/atmel/at91sam9rlek/nand.c
+++ b/board/atmel/at91sam9rlek/nand.c
@@ -37,27 +37,26 @@
#define MASK_ALE (1 << 21) /* our ALE is AD21 */
#define MASK_CLE (1 << 22) /* our CLE is AD22 */
-static void at91sam9rlek_nand_hwcontrol(struct mtd_info *mtd, int cmd)
+static void at91sam9rlek_nand_hwcontrol(struct mtd_info *mtd,
+ int cmd, unsigned int ctrl)
{
struct nand_chip *this = mtd->priv;
- ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
- IO_ADDR_W &= ~(MASK_ALE|MASK_CLE);
- switch (cmd) {
- case NAND_CTL_SETCLE:
- IO_ADDR_W |= MASK_CLE;
- break;
- case NAND_CTL_SETALE:
- IO_ADDR_W |= MASK_ALE;
- break;
- case NAND_CTL_CLRNCE:
- at91_set_gpio_value(AT91_PIN_PB6, 1);
- break;
- case NAND_CTL_SETNCE:
- at91_set_gpio_value(AT91_PIN_PB6, 0);
- break;
+ if (ctrl & NAND_CTRL_CHANGE) {
+ ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
+ IO_ADDR_W &= ~(MASK_ALE | MASK_CLE);
+
+ if (ctrl & NAND_CLE)
+ IO_ADDR_W |= MASK_CLE;
+ if (ctrl & NAND_ALE)
+ IO_ADDR_W |= MASK_ALE;
+
+ at91_set_gpio_value(AT91_PIN_PB6, !(ctrl & NAND_NCE));
+ this->IO_ADDR_W = (void *) IO_ADDR_W;
}
- this->IO_ADDR_W = (void *) IO_ADDR_W;
+
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, this->IO_ADDR_W);
}
static int at91sam9rlek_nand_ready(struct mtd_info *mtd)
@@ -67,11 +66,11 @@ static int at91sam9rlek_nand_ready(struct mtd_info *mtd)
int board_nand_init(struct nand_chip *nand)
{
- nand->eccmode = NAND_ECC_SOFT;
+ nand->ecc.mode = NAND_ECC_SOFT;
#ifdef CFG_NAND_DBW_16
nand->options = NAND_BUSWIDTH_16;
#endif
- nand->hwcontrol = at91sam9rlek_nand_hwcontrol;
+ nand->cmd_ctrl = at91sam9rlek_nand_hwcontrol;
nand->dev_ready = at91sam9rlek_nand_ready;
nand->chip_delay = 20;
diff --git a/board/freescale/m5373evb/nand.c b/board/freescale/m5373evb/nand.c
index 344a614..404a9c3 100644
--- a/board/freescale/m5373evb/nand.c
+++ b/board/freescale/m5373evb/nand.c
@@ -36,64 +36,39 @@ DECLARE_GLOBAL_DATA_PTR;
#include <linux/mtd/mtd.h>
#define SET_CLE 0x10
-#define CLR_CLE ~SET_CLE
#define SET_ALE 0x08
-#define CLR_ALE ~SET_ALE
-static void nand_hwcontrol(struct mtd_info *mtdinfo, int cmd)
+static void nand_hwcontrol(struct mtd_info *mtdinfo, int cmd, unsigned int ctrl)
{
struct nand_chip *this = mtdinfo->priv;
volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS;
u32 nand_baseaddr = (u32) this->IO_ADDR_W;
- switch (cmd) {
- case NAND_CTL_SETNCE:
- case NAND_CTL_CLRNCE:
- break;
- case NAND_CTL_SETCLE:
- nand_baseaddr |= SET_CLE;
- break;
- case NAND_CTL_CLRCLE:
- nand_baseaddr &= CLR_CLE;
- break;
- case NAND_CTL_SETALE:
- nand_baseaddr |= SET_ALE;
- break;
- case NAND_CTL_CLRALE:
- nand_baseaddr |= CLR_ALE;
- break;
- case NAND_CTL_SETWP:
- fbcs->csmr2 |= FBCS_CSMR_WP;
- break;
- case NAND_CTL_CLRWP:
- fbcs->csmr2 &= ~FBCS_CSMR_WP;
- break;
- }
- this->IO_ADDR_W = (void __iomem *)(nand_baseaddr);
-}
+ if (ctrl & NAND_CTRL_CHANGE) {
+ ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
+ IO_ADDR_W &= ~(SET_ALE | SE_CLE);
-static void nand_write_byte(struct mtd_info *mtdinfo, u_char byte)
-{
- struct nand_chip *this = mtdinfo->priv;
- *((volatile u8 *)(this->IO_ADDR_W)) = byte;
-}
+ if (ctrl & NAND_CLE)
+ IO_ADDR_W |= SET_CLE;
+ if (ctrl & NAND_ALE)
+ IO_ADDR_W |= SET_ALE;
-static u8 nand_read_byte(struct mtd_info *mtdinfo)
-{
- struct nand_chip *this = mtdinfo->priv;
- return (u8) (*((volatile u8 *)this->IO_ADDR_R));
-}
+ at91_set_gpio_value(AT91_PIN_PD15, !(ctrl & NAND_NCE));
+ this->IO_ADDR_W = (void *)IO_ADDR_W;
-static int nand_dev_ready(struct mtd_info *mtdinfo)
-{
- return 1;
+ }
+
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, this->IO_ADDR_W);
}
int board_nand_init(struct nand_chip *nand)
{
volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+ volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS;
*((volatile u16 *)CFG_LATCH_ADDR) |= 0x0004;
+ fbcs->csmr2 &= ~FBCS_CSMR_WP;
/* set up pin configuration */
gpio->par_timer &= ~GPIO_PAR_TIN3_TIN3;
@@ -103,11 +78,8 @@ int board_nand_init(struct nand_chip *nand)
gpio->podr_timer = 0;
nand->chip_delay = 50;
- nand->eccmode = NAND_ECC_SOFT;
- nand->hwcontrol = nand_hwcontrol;
- nand->read_byte = nand_read_byte;
- nand->write_byte = nand_write_byte;
- nand->dev_ready = nand_dev_ready;
+ nand->ecc.mode = NAND_ECC_SOFT;
+ nand->cmd_ctrl = nand_hwcontrol;
return 0;
}
diff --git a/board/quad100hd/nand.c b/board/quad100hd/nand.c
index a36b89d..766ee95 100644
--- a/board/quad100hd/nand.c
+++ b/board/quad100hd/nand.c
@@ -25,35 +25,25 @@
#include <config.h>
#if defined(CONFIG_CMD_NAND)
#include <asm/gpio.h>
+#include <asm/io.h>
#include <nand.h>
/*
* hardware specific access to control-lines
*/
-static void quad100hd_hwcontrol(struct mtd_info *mtd, int cmd)
+static void quad100hd_hwcontrol(struct mtd_info *mtd,
+ int cmd, unsigned int ctrl)
{
- switch(cmd) {
- case NAND_CTL_SETCLE:
- gpio_write_bit(CFG_NAND_CLE, 1);
- break;
- case NAND_CTL_CLRCLE:
- gpio_write_bit(CFG_NAND_CLE, 0);
- break;
+ struct nand_chip *this = mtd->priv;
- case NAND_CTL_SETALE:
- gpio_write_bit(CFG_NAND_ALE, 1);
- break;
- case NAND_CTL_CLRALE:
- gpio_write_bit(CFG_NAND_ALE, 0);
- break;
-
- case NAND_CTL_SETNCE:
- gpio_write_bit(CFG_NAND_CE, 0);
- break;
- case NAND_CTL_CLRNCE:
- gpio_write_bit(CFG_NAND_CE, 1);
- break;
+ if (ctrl & NAND_CTRL_CHANGE) {
+ gpio_write_bit(CFG_NAND_CLE, !!(ctrl & NAND_CLE));
+ gpio_write_bit(CFG_NAND_ALE, !!(ctrl & NAND_ALE));
+ gpio_write_bit(CFG_NAND_CE, !(ctrl & NAND_NCE));
}
+
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, this->IO_ADDR_W);
}
static int quad100hd_nand_ready(struct mtd_info *mtd)
@@ -67,9 +57,9 @@ static int quad100hd_nand_ready(struct mtd_info *mtd)
int board_nand_init(struct nand_chip *nand)
{
/* Set address of hardware control function */
- nand->hwcontrol = quad100hd_hwcontrol;
+ nand->cmd_ctrl = quad100hd_hwcontrol;
nand->dev_ready = quad100hd_nand_ready;
- nand->eccmode = NAND_ECC_SOFT;
+ nand->ecc.mode = NAND_ECC_SOFT;
/* 15 us command delay time */
nand->chip_delay = 20;
diff --git a/board/socrates/nand.c b/board/socrates/nand.c
index fc82ecb..6ec53f8 100644
--- a/board/socrates/nand.c
+++ b/board/socrates/nand.c
@@ -31,22 +31,20 @@
static int state;
static void nand_write_byte(struct mtd_info *mtd, u_char byte);
static void nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len);
-static void nand_write_word(struct mtd_info *mtd, u16 word);
static u_char nand_read_byte(struct mtd_info *mtd);
static u16 nand_read_word(struct mtd_info *mtd);
static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len);
static int nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len);
static int nand_device_ready(struct mtd_info *mtdinfo);
-static void nand_hwcontrol(struct mtd_info *mtdinfo, int cmd);
#define FPGA_NAND_CMD_MASK (0x7 << 28)
-#define FPGA_NAND_CMD_COMMAND (0x0 << 28)
+#define FPGA_NAND_CMD_COMMAND (0x0 << 28)
#define FPGA_NAND_CMD_ADDR (0x1 << 28)
#define FPGA_NAND_CMD_READ (0x2 << 28)
#define FPGA_NAND_CMD_WRITE (0x3 << 28)
#define FPGA_NAND_BUSY (0x1 << 15)
#define FPGA_NAND_ENABLE (0x1 << 31)
-#define FPGA_NAND_DATA_SHIFT 16
+#define FPGA_NAND_DATA_SHIFT 16
/**
* nand_write_byte - write one byte to the chip
@@ -59,16 +57,6 @@ static void nand_write_byte(struct mtd_info *mtd, u_char byte)
}
/**
- * nand_write_word - write one word to the chip
- * @mtd: MTD device structure
- * @word: data word to write
- */
-static void nand_write_word(struct mtd_info *mtd, u16 word)
-{
- nand_write_buf(mtd, (const uchar *)&word, sizeof(word));
-}
-
-/**
* nand_write_buf - write buffer to chip
* @mtd: MTD device structure
* @buf: data buffer
@@ -78,18 +66,10 @@ static void nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
{
int i;
struct nand_chip *this = mtd->priv;
- long val;
-
- if ((state & FPGA_NAND_CMD_MASK) == FPGA_NAND_CMD_MASK) {
- /* Write data */
- val = (state & FPGA_NAND_ENABLE) | FPGA_NAND_CMD_WRITE;
- } else {
- /* Write address or command */
- val = state;
- }
for (i = 0; i < len; i++) {
- out_be32(this->IO_ADDR_W, val | (buf[i] << FPGA_NAND_DATA_SHIFT));
+ out_be32(this->IO_ADDR_W,
+ state | (buf[i] << FPGA_NAND_DATA_SHIFT));
}
}
@@ -148,7 +128,7 @@ static int nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
for (i = 0; i < len; i++) {
if (buf[i] != nand_read_byte(mtd));
- return -EFAULT;
+ return -EFAULT;
}
return 0;
}
@@ -171,42 +151,42 @@ static int nand_device_ready(struct mtd_info *mtdinfo)
* @mtd: MTD device structure
* @cmd: Command
*/
-static void nand_hwcontrol(struct mtd_info *mtdinfo, int cmd)
+static void nand_hwcontrol(struct mtd_info *mtdinfo, int cmd, unsigned int ctrl)
{
+ if (ctrl & NAND_CTRL_CHANGE) {
+ state &= ~(FPGA_NAND_CMD_MASK | FPGA_NAND_ENABLE);
+
+ switch (ctrl & (NAND_ALE | NAND_CLE)) {
+ case 0:
+ state |= FPGA_NAND_CMD_WRITE;
+ break;
+
+ case NAND_ALE:
+ state |= FPGA_NAND_CMD_ADDR;
+ break;
- switch(cmd) {
- case NAND_CTL_CLRALE:
- state |= FPGA_NAND_CMD_MASK; /* use all 1s to mark */
- break;
- case NAND_CTL_CLRCLE:
- state |= FPGA_NAND_CMD_MASK; /* use all 1s to mark */
- break;
- case NAND_CTL_SETCLE:
- state = (state & ~FPGA_NAND_CMD_MASK) | FPGA_NAND_CMD_COMMAND;
- break;
- case NAND_CTL_SETALE:
- state = (state & ~FPGA_NAND_CMD_MASK) | FPGA_NAND_CMD_ADDR;
- break;
- case NAND_CTL_SETNCE:
- state |= FPGA_NAND_ENABLE;
- break;
- case NAND_CTL_CLRNCE:
- state &= ~FPGA_NAND_ENABLE;
- break;
- default:
- printf("%s: unknown cmd %#x\n", __FUNCTION__, cmd);
- break;
+ case NAND_CLE:
+ state |= FPGA_NAND_CMD_COMMAND;
+ break;
+
+ default:
+ printf("%s: unknown ctrl %#x\n", __FUNCTION__, ctrl);
+ }
+
+ if (ctrl & NAND_NCE)
+ state |= FPGA_NAND_ENABLE;
}
+
+ if (cmd != NAND_CMD_NONE)
+ nand_write_byte(mtdinfo, cmd);
}
int board_nand_init(struct nand_chip *nand)
{
- nand->hwcontrol = nand_hwcontrol;
- nand->eccmode = NAND_ECC_SOFT;
+ nand->cmd_ctrl = nand_hwcontrol;
+ nand->ecc.mode = NAND_ECC_SOFT;
nand->dev_ready = nand_device_ready;
- nand->write_byte = nand_write_byte;
nand->read_byte = nand_read_byte;
- nand->write_word = nand_write_word;
nand->read_word = nand_read_word;
nand->write_buf = nand_write_buf;
nand->read_buf = nand_read_buf;
diff --git a/common/env_onenand.c b/common/env_onenand.c
index dbd0883..d5c907c 100644
--- a/common/env_onenand.c
+++ b/common/env_onenand.c
@@ -40,7 +40,7 @@ extern struct onenand_chip onenand_chip;
/* References to names in env_common.c */
extern uchar default_environment[];
-#define ONENAND_ENV_SIZE(mtd) (mtd.oobblock - ENV_HEADER_SIZE)
+#define ONENAND_ENV_SIZE(mtd) (mtd.writesize - ENV_HEADER_SIZE)
char *env_name_spec = "OneNAND";
@@ -68,12 +68,12 @@ void env_relocate_spec(void)
env_addr = CFG_ENV_ADDR;
/* Check OneNAND exist */
- if (onenand_mtd.oobblock)
+ if (onenand_mtd.writesize)
/* Ignore read fail */
- onenand_read(&onenand_mtd, env_addr, onenand_mtd.oobblock,
+ onenand_read(&onenand_mtd, env_addr, onenand_mtd.writesize,
&retlen, (u_char *) env_ptr);
else
- onenand_mtd.oobblock = MAX_ONENAND_PAGESIZE;
+ onenand_mtd.writesize = MAX_ONENAND_PAGESIZE;
if (crc32(0, env_ptr->data, ONENAND_ENV_SIZE(onenand_mtd)) !=
env_ptr->crc)
@@ -109,7 +109,7 @@ int saveenv(void)
env_ptr->crc =
crc32(0, env_ptr->data, ONENAND_ENV_SIZE(onenand_mtd));
- if (onenand_write(&onenand_mtd, env_addr, onenand_mtd.oobblock, &retlen,
+ if (onenand_write(&onenand_mtd, env_addr, onenand_mtd.writesize, &retlen,
(u_char *) env_ptr)) {
printf("OneNAND: write failed at 0x%08x\n", instr.addr);
return 2;
diff --git a/cpu/arm920t/s3c24x0/nand.c b/cpu/arm920t/s3c24x0/nand.c
index 14882cb..60174fb 100644
--- a/cpu/arm920t/s3c24x0/nand.c
+++ b/cpu/arm920t/s3c24x0/nand.c
@@ -31,6 +31,7 @@
#include <nand.h>
#include <s3c2410.h>
+#include <asm/io.h>
#define __REGb(x) (*(volatile unsigned char *)(x))
#define __REGi(x) (*(volatile unsigned int *)(x))
@@ -54,34 +55,33 @@
#define S3C2410_NFCONF_TWRPH0(x) ((x)<<4)
#define S3C2410_NFCONF_TWRPH1(x) ((x)<<0)
-static void s3c2410_hwcontrol(struct mtd_info *mtd, int cmd)
+#define S3C2410_ADDR_NALE 4
+#define S3C2410_ADDR_NCLE 8
+
+static void s3c2410_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
struct nand_chip *chip = mtd->priv;
- DEBUGN("hwcontrol(): 0x%02x: ", cmd);
-
- switch (cmd) {
- case NAND_CTL_SETNCE:
- NFCONF &= ~S3C2410_NFCONF_nFCE;
- DEBUGN("NFCONF=0x%08x\n", NFCONF);
- break;
- case NAND_CTL_CLRNCE:
- NFCONF |= S3C2410_NFCONF_nFCE;
- DEBUGN("NFCONF=0x%08x\n", NFCONF);
- break;
- case NAND_CTL_SETALE:
- chip->IO_ADDR_W = NF_BASE + 0x8;
- DEBUGN("SETALE\n");
- break;
- case NAND_CTL_SETCLE:
- chip->IO_ADDR_W = NF_BASE + 0x4;
- DEBUGN("SETCLE\n");
- break;
- default:
- chip->IO_ADDR_W = NF_BASE + 0xc;
- break;
+ DEBUGN("hwcontrol(): 0x%02x 0x%02x\n", cmd, ctrl);
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ ulong IO_ADDR_W = NF_BASE;
+
+ if (!(ctrl & NAND_CLE))
+ IO_ADDR_W |= S3C2410_ADDR_NCLE;
+ if (!(ctrl & NAND_ALE))
+ IO_ADDR_W |= S3C2410_ADDR_NALE;
+
+ chip->IO_ADDR_W = (void *)IO_ADDR_W;
+
+ if (ctrl & NAND_NCE)
+ NFCONF &= ~S3C2410_NFCONF_nFCE;
+ else
+ NFCONF |= S3C2410_NFCONF_nFCE;
}
- return;
+
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, chip->IO_ADDR_W);
}
static int s3c2410_dev_ready(struct mtd_info *mtd)
@@ -93,7 +93,7 @@ static int s3c2410_dev_ready(struct mtd_info *mtd)
#ifdef CONFIG_S3C2410_NAND_HWECC
void s3c2410_nand_enable_hwecc(struct mtd_info *mtd, int mode)
{
- DEBUGN("s3c2410_nand_enable_hwecc(%p, %d)\n", mtd ,mode);
+ DEBUGN("s3c2410_nand_enable_hwecc(%p, %d)\n", mtd, mode);
NFCONF |= S3C2410_NFCONF_INITECC;
}
@@ -143,23 +143,23 @@ int board_nand_init(struct nand_chip *nand)
NFCONF = cfg;
/* initialize nand_chip data structure */
- nand->IO_ADDR_R = nand->IO_ADDR_W = 0x4e00000c;
+ nand->IO_ADDR_R = nand->IO_ADDR_W = (void *)0x4e00000c;
/* read_buf and write_buf are default */
/* read_byte and write_byte are default */
/* hwcontrol always must be implemented */
- nand->hwcontrol = s3c2410_hwcontrol;
+ nand->cmd_ctrl = s3c2410_hwcontrol;
nand->dev_ready = s3c2410_dev_ready;
#ifdef CONFIG_S3C2410_NAND_HWECC
- nand->enable_hwecc = s3c2410_nand_enable_hwecc;
- nand->calculate_ecc = s3c2410_nand_calculate_ecc;
- nand->correct_data = s3c2410_nand_correct_data;
- nand->eccmode = NAND_ECC_HW3_512;
+ nand->ecc.hwctl = s3c2410_nand_enable_hwecc;
+ nand->ecc.calculate = s3c2410_nand_calculate_ecc;
+ nand->ecc.correct = s3c2410_nand_correct_data;
+ nand->ecc.mode = NAND_ECC_HW3_512;
#else
- nand->eccmode = NAND_ECC_SOFT;
+ nand->ecc.mode = NAND_ECC_SOFT;
#endif
#ifdef CONFIG_S3C2410_NAND_BBT
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index 7c9438b..8f12fa2 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -328,7 +328,7 @@ static inline int onenand_bufferram_offset(struct mtd_info *mtd, int area)
if (ONENAND_CURRENT_BUFFERRAM(this)) {
if (area == ONENAND_DATARAM)
- return mtd->oobblock;
+ return mtd->writesize;
if (area == ONENAND_SPARERAM)
return mtd->oobsize;
}
@@ -479,6 +479,30 @@ static int onenand_update_bufferram(struct mtd_info *mtd, loff_t addr,
}
/**
+ * onenand_invalidate_bufferram - [GENERIC] Invalidate BufferRAM information
+ * @param mtd MTD data structure
+ * @param addr start address to invalidate
+ * @param len length to invalidate
+ *
+ * Invalidate BufferRAM information
+ */
+static void onenand_invalidate_bufferram(struct mtd_info *mtd, loff_t addr,
+ unsigned int len)
+{
+ struct onenand_chip *this = mtd->priv;
+ int i;
+ loff_t end_addr = addr + len;
+
+ /* Invalidate BufferRAM */
+ for (i = 0; i < MAX_BUFFERRAM; i++) {
+ loff_t buf_addr = this->bufferram[i].block << this->erase_shift;
+
+ if (buf_addr >= addr && buf_addr < end_addr)
+ this->bufferram[i].valid = 0;
+ }
+}
+
+/**
* onenand_get_device - [GENERIC] Get chip for selected access
* @param mtd MTD device structure
* @param new_state the state which is requested
@@ -538,15 +562,15 @@ static int onenand_read_ecc(struct mtd_info *mtd, loff_t from, size_t len,
onenand_get_device(mtd, FL_READING);
while (read < len) {
- thislen = min_t(int, mtd->oobblock, len - read);
+ thislen = min_t(int, mtd->writesize, len - read);
- column = from & (mtd->oobblock - 1);
- if (column + thislen > mtd->oobblock)
- thislen = mtd->oobblock - column;
+ column = from & (mtd->writesize - 1);
+ if (column + thislen > mtd->writesize)
+ thislen = mtd->writesize - column;
if (!onenand_check_bufferram(mtd, from)) {
this->command(mtd, ONENAND_CMD_READ, from,
- mtd->oobblock);
+ mtd->writesize);
ret = this->wait(mtd, FL_READING);
/* First copy data and check return value for ECC handling */
onenand_update_bufferram(mtd, from, 1);
@@ -661,7 +685,7 @@ int onenand_read_oob(struct mtd_info *mtd, loff_t from, size_t len,
/* Read more? */
if (read < len) {
/* Page size */
- from += mtd->oobblock;
+ from += mtd->writesize;
column = 0;
}
}
@@ -688,7 +712,7 @@ static int onenand_verify_page(struct mtd_info *mtd, u_char * buf,
void __iomem *dataram0, *dataram1;
int ret = 0;
- this->command(mtd, ONENAND_CMD_READ, addr, mtd->oobblock);
+ this->command(mtd, ONENAND_CMD_READ, addr, mtd->writesize);
ret = this->wait(mtd, FL_READING);
if (ret)
@@ -698,9 +722,9 @@ static int onenand_verify_page(struct mtd_info *mtd, u_char * buf,
/* Check, if the two dataram areas are same */
dataram0 = this->base + ONENAND_DATARAM;
- dataram1 = dataram0 + mtd->oobblock;
+ dataram1 = dataram0 + mtd->writesize;
- if (memcmp(dataram0, dataram1, mtd->oobblock))
+ if (memcmp(dataram0, dataram1, mtd->writesize))
return -EBADMSG;
return 0;
@@ -709,7 +733,7 @@ static int onenand_verify_page(struct mtd_info *mtd, u_char * buf,
#define onenand_verify_page(...) (0)
#endif
-#define NOTALIGNED(x) ((x & (mtd->oobblock - 1)) != 0)
+#define NOTALIGNED(x) ((x & (mtd->writesize - 1)) != 0)
/**
* onenand_write_ecc - [MTD Interface] OneNAND write with ECC
@@ -757,15 +781,15 @@ static int onenand_write_ecc(struct mtd_info *mtd, loff_t to, size_t len,
/* Loop until all data write */
while (written < len) {
- int thislen = min_t(int, mtd->oobblock, len - written);
+ int thislen = min_t(int, mtd->writesize, len - written);
- this->command(mtd, ONENAND_CMD_BUFFERRAM, to, mtd->oobblock);
+ this->command(mtd, ONENAND_CMD_BUFFERRAM, to, mtd->writesize);
this->write_bufferram(mtd, ONENAND_DATARAM, buf, 0, thislen);
this->write_bufferram(mtd, ONENAND_SPARERAM, ffchars, 0,
mtd->oobsize);
- this->command(mtd, ONENAND_CMD_PROG, to, mtd->oobblock);
+ this->command(mtd, ONENAND_CMD_PROG, to, mtd->writesize);
onenand_update_bufferram(mtd, to, 1);
@@ -890,6 +914,25 @@ int onenand_write_oob(struct mtd_info *mtd, loff_t to, size_t len,
}
/**
+ * onenand_block_isbad_nolock - [GENERIC] Check if a block is marked bad
+ * @param mtd MTD device structure
+ * @param ofs offset from device start
+ * @param allowbbt 1, if its allowed to access the bbt area
+ *
+ * Check, if the block is bad, Either by reading the bad block table or
+ * calling of the scan function.
+ */
+static int onenand_block_isbad_nolock(struct mtd_info *mtd, loff_t ofs, int allowbbt)
+{
+ struct onenand_chip *this = mtd->priv;
+ struct bbm_info *bbm = this->bbm;
+
+ /* Return info from the table */
+ return bbm->isbad_bbt(mtd, ofs, allowbbt);
+}
+
+
+/**
* onenand_erase - [MTD Interface] erase block(s)
* @param mtd MTD device structure
* @param instr erase instruction
@@ -947,6 +990,8 @@ int onenand_erase(struct mtd_info *mtd, struct erase_info *instr)
this->command(mtd, ONENAND_CMD_ERASE, addr, block_size);
+ onenand_invalidate_bufferram(mtd, addr, block_size);
+
ret = this->wait(mtd, FL_ERASING);
/* Check, if it is write protected */
if (ret) {
@@ -1002,30 +1047,45 @@ void onenand_sync(struct mtd_info *mtd)
* onenand_block_isbad - [MTD Interface] Check whether the block at the given offset is bad
* @param mtd MTD device structure
* @param ofs offset relative to mtd start
+ *
+ * Check whether the block is bad
*/
int onenand_block_isbad(struct mtd_info *mtd, loff_t ofs)
{
- /*
- * TODO
- * 1. Bad block table (BBT)
- * -> using NAND BBT to support JFFS2
- * 2. Bad block management (BBM)
- * -> bad block replace scheme
- *
- * Currently we do nothing
- */
- return 0;
+ int ret;
+
+ /* Check for invalid offset */
+ if (ofs > mtd->size)
+ return -EINVAL;
+
+ onenand_get_device(mtd, FL_READING);
+ ret = onenand_block_isbad_nolock(mtd,ofs, 0);
+ onenand_release_device(mtd);
+ return ret;
}
/**
* onenand_block_markbad - [MTD Interface] Mark the block at the given offset as bad
* @param mtd MTD device structure
* @param ofs offset relative to mtd start
+ *
+ * Mark the block as bad
*/
int onenand_block_markbad(struct mtd_info *mtd, loff_t ofs)
{
- /* see above */
- return 0;
+ struct onenand_chip *this = mtd->priv;
+ int ret;
+
+ ret = onenand_block_isbad(mtd, ofs);
+ if (ret) {
+ /* If it was bad already, return success and do nothing */
+ if (ret > 0)
+ return 0;
+ return ret;
+ }
+
+ ret = this->block_markbad(mtd, ofs);
+ return ret;
}
/**
@@ -1181,10 +1241,8 @@ static int onenand_probe(struct mtd_info *mtd)
/* Reset OneNAND to read default register values */
this->write_word(ONENAND_CMD_RESET, this->base + ONENAND_BOOTRAM);
- {
- int i;
- for (i = 0; i < 10000; i++) ;
- }
+ /* Wait reset */
+ this->wait(mtd, FL_RESETING);
/* Read manufacturer and device IDs from Register */
maf_id = this->read_word(this->base + ONENAND_REG_MANUFACTURER_ID);
@@ -1209,16 +1267,16 @@ static int onenand_probe(struct mtd_info *mtd)
/* OneNAND page size & block size */
/* The data buffer size is equal to page size */
- mtd->oobblock =
+ mtd->writesize =
this->read_word(this->base + ONENAND_REG_DATA_BUFFER_SIZE);
- mtd->oobsize = mtd->oobblock >> 5;
+ mtd->oobsize = mtd->writesize >> 5;
/* Pagers per block is always 64 in OneNAND */
- mtd->erasesize = mtd->oobblock << 6;
+ mtd->erasesize = mtd->writesize << 6;
this->erase_shift = ffs(mtd->erasesize) - 1;
- this->page_shift = ffs(mtd->oobblock) - 1;
+ this->page_shift = ffs(mtd->writesize) - 1;
this->ppb_shift = (this->erase_shift - this->page_shift);
- this->page_mask = (mtd->erasesize / mtd->oobblock) - 1;
+ this->page_mask = (mtd->erasesize / mtd->writesize) - 1;
/* REVIST: Multichip handling */
@@ -1237,11 +1295,10 @@ static int onenand_probe(struct mtd_info *mtd)
this->options |= ONENAND_CONT_LOCK;
}
+ mtd->flags = MTD_CAP_NANDFLASH;
mtd->erase = onenand_erase;
mtd->read = onenand_read;
mtd->write = onenand_write;
- mtd->read_ecc = onenand_read_ecc;
- mtd->write_ecc = onenand_write_ecc;
mtd->read_oob = onenand_read_oob;
mtd->write_oob = onenand_write_oob;
mtd->sync = onenand_sync;
diff --git a/drivers/mtd/onenand/onenand_bbt.c b/drivers/mtd/onenand/onenand_bbt.c
index 0abaa1a..d13d277 100644
--- a/drivers/mtd/onenand/onenand_bbt.c
+++ b/drivers/mtd/onenand/onenand_bbt.c
@@ -94,7 +94,7 @@ static int create_bbt(struct mtd_info *mtd, uint8_t * buf,
/* No need to read pages fully,
* just read required OOB bytes */
ret = onenand_read_oob(mtd,
- from + j * mtd->oobblock +
+ from + j * mtd->writesize +
bd->offs, readlen, &retlen,
&buf[0]);
@@ -104,7 +104,7 @@ static int create_bbt(struct mtd_info *mtd, uint8_t * buf,
}
if (check_short_pattern
- (&buf[j * scanlen], scanlen, mtd->oobblock, bd)) {
+ (&buf[j * scanlen], scanlen, mtd->writesize, bd)) {
bbm->bbt[i >> 3] |= 0x03 << (i & 0x6);
printk(KERN_WARNING
"Bad eraseblock %d at 0x%08x\n", i >> 1,
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 8e0dc00..14815c2 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -22,6 +22,22 @@
#define MTD_ERASE_DONE 0x08
#define MTD_ERASE_FAILED 0x10
+/*
+ * Enumeration for NAND/OneNAND flash chip state
+ */
+enum {
+ FL_READY,
+ FL_READING,
+ FL_WRITING,
+ FL_ERASING,
+ FL_SYNCING,
+ FL_CACHEDPRG,
+ FL_RESETING,
+ FL_UNLOCKING,
+ FL_LOCKING,
+ FL_PM_SUSPENDED,
+};
+
/* If the erase fails, fail_addr might indicate exactly which block failed. If
fail_addr = 0xffffffff, the failure was not at the device level or was not
specific to any particular block. */
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 2993a89..7ac72de 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -213,20 +213,6 @@ typedef enum {
#define NAND_CI_CHIPNR_MSK 0x03
#define NAND_CI_CELLTYPE_MSK 0x0C
-/*
- * nand_state_t - chip states
- * Enumeration for NAND flash chip state
- */
-typedef enum {
- FL_READY,
- FL_READING,
- FL_WRITING,
- FL_ERASING,
- FL_SYNCING,
- FL_CACHEDPRG,
- FL_PM_SUSPENDED,
-} nand_state_t;
-
/* Keep gcc happy */
struct nand_chip;
@@ -416,7 +402,7 @@ struct nand_chip {
uint8_t cellinfo;
int badblockpos;
- nand_state_t state;
+ int state;
uint8_t *oob_poi;
struct nand_hw_control *controller;
diff --git a/include/linux/mtd/nand_legacy.h b/include/linux/mtd/nand_legacy.h
index 4494bc5..99eafbb 100644
--- a/include/linux/mtd/nand_legacy.h
+++ b/include/linux/mtd/nand_legacy.h
@@ -55,18 +55,6 @@
#define NAND_CMD_RESET 0xff
/*
- * Enumeration for NAND flash chip state
- */
-typedef enum {
- FL_READY,
- FL_READING,
- FL_WRITING,
- FL_ERASING,
- FL_SYNCING
-} nand_state_t;
-
-
-/*
* NAND Private Flash Chip Data
*
* Structure overview:
diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h
index 4b0c2df..8a0fd0d 100644
--- a/include/linux/mtd/onenand.h
+++ b/include/linux/mtd/onenand.h
@@ -17,6 +17,7 @@
/* Note: The header order is impoertant */
#include <onenand_uboot.h>
+#include <linux/mtd/compat.h>
#include <linux/mtd/bbm.h>
#define MAX_BUFFERRAM 2
@@ -28,20 +29,6 @@ extern int onenand_scan (struct mtd_info *mtd, int max_chips);
extern void onenand_release (struct mtd_info *mtd);
/**
- * onenand_state_t - chip states
- * Enumeration for OneNAND flash chip state
- */
-typedef enum {
- FL_READY,
- FL_READING,
- FL_WRITING,
- FL_ERASING,
- FL_SYNCING,
- FL_UNLOCKING,
- FL_LOCKING,
-} onenand_state_t;
-
-/**
* struct onenand_bufferram - OneNAND BufferRAM Data
* @param block block address in BufferRAM
* @param page page address in BufferRAM
@@ -103,10 +90,12 @@ struct onenand_chip {
unsigned short (*read_word) (void __iomem * addr);
void (*write_word) (unsigned short value, void __iomem * addr);
void (*mmcontrol) (struct mtd_info * mtd, int sync_read);
+ int (*block_markbad)(struct mtd_info *mtd, loff_t ofs);
+ int (*scan_bbt)(struct mtd_info *mtd);
spinlock_t chip_lock;
wait_queue_head_t wq;
- onenand_state_t state;
+ int state;
struct nand_oobinfo *autooob;