summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--CHANGELOG6
-rw-r--r--MAKEALL2
-rw-r--r--Makefile2
-rw-r--r--board/fads/config.mk4
-rw-r--r--board/fads/fads.c36
-rw-r--r--board/fads/fads.h51
-rw-r--r--cpu/mpc8xx/fec.c14
-rw-r--r--cpu/mpc8xx/speed.c39
-rw-r--r--include/asm-ppc/8xx_immap.h2
-rw-r--r--include/common.h8
-rw-r--r--include/commproc.h3
-rw-r--r--include/configs/ADS860.h16
-rw-r--r--include/configs/FADS860T.h14
-rw-r--r--include/configs/MPC86xADS.h13
-rw-r--r--include/configs/MPC885ADS.h (renamed from include/configs/DUET_ADS.h)32
15 files changed, 137 insertions, 105 deletions
diff --git a/CHANGELOG b/CHANGELOG
index 3610e92..519e977 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,12 @@
Changes since U-Boot 1.1.1:
======================================================================
+* Patch by Yuli Barcohen, 19 Apr 2004:
+ - Rename DUET_ADS to MPC885ADS
+ - Rename CONFIG_DUET to CONFIG_MPC885_FAMILY
+ - Rename CONFIG_866_et_al to CONFIG_MPC866_FAMILY
+ - Clean up FADS family port to use the new defines
+
* Fix PCI support on CPC45 board
* Patch by Scott McNutt, 25 Apr 2004:
diff --git a/MAKEALL b/MAKEALL
index d0dd223..7c1576b 100644
--- a/MAKEALL
+++ b/MAKEALL
@@ -34,7 +34,7 @@ LIST_5xxx=" \
LIST_8xx=" \
AdderII ADS860 AMX860 c2mon \
- CCM cogent_mpc8xx DUET_ADS ESTEEM192E \
+ CCM cogent_mpc8xx MPC885ADS ESTEEM192E \
ETX094 ELPT860 FADS823 FADS850SAR \
FADS860T FLAGADM FPS850L GEN860T \
GEN860T_SC GENIETV GTH hermes \
diff --git a/Makefile b/Makefile
index a55d88a..7b84baf 100644
--- a/Makefile
+++ b/Makefile
@@ -266,10 +266,10 @@ AdderII_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx adderII
ADS860_config \
-DUET_ADS_config \
FADS823_config \
FADS850SAR_config \
MPC86xADS_config \
+MPC885ADS_config \
FADS860T_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx fads
diff --git a/board/fads/config.mk b/board/fads/config.mk
index dcf83fb..621b9a2 100644
--- a/board/fads/config.mk
+++ b/board/fads/config.mk
@@ -24,8 +24,8 @@
#
#
-# Motorola old MPC821/860ADS, MPC8xxFADS, new MPC866ADS, and DUET
-# (MPC87x/88x) ADS boards
+# Motorola old MPC821/860ADS, MPC8xxFADS, new MPC866ADS, and
+# MPC885ADS boards
#
TEXT_BASE = 0xFE000000
diff --git a/board/fads/fads.c b/board/fads/fads.c
index 1507146..013b3cb 100644
--- a/board/fads/fads.c
+++ b/board/fads/fads.c
@@ -26,12 +26,13 @@
#include <config.h>
#include <common.h>
#include <mpc8xx.h>
+#include <pcmcia.h>
#define _NOT_USED_ 0xFFFFFFFF
/* ========================================================================= */
-#ifndef CONFIG_DUET_ADS /* No old DRAM on Duet */
+#ifndef CONFIG_MPC885ADS /* No old DRAM on MPC885ADS */
#if defined(CONFIG_DRAM_50MHZ)
/* 50MHz tables */
@@ -290,7 +291,7 @@ static void _dramdisable(void)
/* maybe we should turn off upma here or something */
}
-#endif /* !CONFIG_DUET_ADS */
+#endif /* !CONFIG_MPC885ADS */
/* ========================================================================= */
@@ -604,7 +605,7 @@ long int initdram (int board_type)
uint sdramsz = 0; /* size of sdram in Mbytes */
uint base = 0; /* base of dram in bytes */
uint m = 0; /* size of dram in Mbytes */
-#ifndef CONFIG_DUET_ADS
+#ifndef CONFIG_MPC885ADS
uint k, s;
#endif
@@ -614,7 +615,7 @@ long int initdram (int board_type)
printf ("(%u MB SDRAM) ", sdramsz);
}
#endif
-#ifndef CONFIG_DUET_ADS /* No old DRAM on Duet */
+#ifndef CONFIG_MPC885ADS /* No old DRAM on MPC885ADS */
k = (*((uint *) BCSR2) >> 23) & 0x0f;
switch (k & 0x3) {
@@ -665,7 +666,7 @@ long int initdram (int board_type)
_dramdisable ();
m = 0;
}
-#endif /* !CONFIG_DUET_ADS */
+#endif /* !CONFIG_MPC885ADS */
m += sdramsz; /* add sdram size to total */
return (m << 20);
@@ -734,8 +735,8 @@ int checkboard (void)
#if defined(CONFIG_MPC86xADS)
puts ("MPC86xADS");
-#elif defined(CONFIG_DUET_ADS)
- puts ("DUET ADS");
+#elif defined(CONFIG_MPC885ADS)
+ puts ("MPC885ADS");
r = 0; /* I've got NR (No Revision) board */
#elif defined(CONFIG_FADS)
puts ("FADS");
@@ -759,7 +760,7 @@ int checkboard (void)
case 0x03:
puts ("B \n");
break;
-#elif defined(CONFIG_DUET_ADS)
+#elif defined(CONFIG_MPC885ADS)
case 0x00:
puts ("NR\n");
break;
@@ -790,7 +791,7 @@ volatile unsigned char *pcmcia_mem = (unsigned char*)CFG_PCMCIA_MEM_ADDR;
int pcmcia_init(void)
{
volatile pcmconf8xx_t *pcmp;
- uint v, slota, slotb;
+ uint v, slota = 0, slotb = 0;
/*
** Enable the PCMCIA for a Flash card.
@@ -805,10 +806,10 @@ int pcmcia_init(void)
/* Set all slots to zero by default. */
pcmp->pcmc_pgcra = 0;
pcmp->pcmc_pgcrb = 0;
-#ifdef PCMCIA_SLOT_A
+#ifdef CONFIG_PCMCIA_SLOT_A
pcmp->pcmc_pgcra = 0x40;
#endif
-#ifdef PCMCIA_SLOT_B
+#ifdef CONFIG_PCMCIA_SLOT_B
pcmp->pcmc_pgcrb = 0x40;
#endif
@@ -817,17 +818,17 @@ int pcmcia_init(void)
/* Check if any PCMCIA card is plugged in. */
+#ifdef CONFIG_PCMCIA_SLOT_A
slota = (pcmp->pcmc_pipr & 0x18000000) == 0 ;
+#endif
+#ifdef CONFIG_PCMCIA_SLOT_B
slotb = (pcmp->pcmc_pipr & 0x00001800) == 0 ;
+#endif
if (!(slota || slotb)) {
printf("No card present\n");
-#ifdef PCMCIA_SLOT_A
pcmp->pcmc_pgcra = 0;
-#endif
-#ifdef PCMCIA_SLOT_B
pcmp->pcmc_pgcrb = 0;
-#endif
return -1;
}
else
@@ -908,9 +909,10 @@ int pcmcia_init(void)
udelay(20);
-#ifdef PCMCIA_SLOT_A
+#ifdef CONFIG_PCMCIA_SLOT_A
pcmp->pcmc_pgcra = 0;
-#elif PCMCIA_SLOT_B
+#endif
+#ifdef CONFIG_PCMCIA_SLOT_B
pcmp->pcmc_pgcrb = 0;
#endif
diff --git a/board/fads/fads.h b/board/fads/fads.h
index 668b906..d4e9f02 100644
--- a/board/fads/fads.h
+++ b/board/fads/fads.h
@@ -48,9 +48,6 @@
* | ... | v
*
*****************************************************************************/
-/* should ALWAYS define this, measure_gclk in speed.c is unreliable */
-/* in general, we always know this for FADS+new ADS anyway */
-#define CONFIG_8xx_GCLK_FREQ ((CFG_8XX_XIN) * (CFG_8XX_FACT))
#if 0
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
@@ -66,6 +63,7 @@
"bootm"
#undef CONFIG_WATCHDOG /* watchdog disabled */
+#define CONFIG_BZIP2 /* include support for bzip2 compressed images */
/*
* New MPC86xADS and Duet provide two Ethernet connectivity options:
@@ -90,11 +88,12 @@
#endif
#ifndef CONFIG_COMMANDS
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_DHCP \
- | CFG_CMD_IMMAP \
- | CFG_CMD_MII \
- | CFG_CMD_PING \
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
+ | CFG_CMD_DHCP \
+ | CFG_CMD_IMMAP \
+ | CFG_CMD_MII \
+ | CFG_CMD_PCMCIA \
+ | CFG_CMD_PING \
)
#endif /* !CONFIG_COMMANDS */
@@ -146,7 +145,7 @@
* Please note that CFG_SDRAM_BASE _must_ start at 0
*/
#define CFG_SDRAM_BASE 0x00000000
-#if defined(CONFIG_MPC86xADS) || defined(CONFIG_DUET_ADS) /* New ADS or Duet */
+#if defined(CONFIG_MPC86xADS) || defined(CONFIG_MPC885ADS) /* New ADS or Duet */
#define CFG_SDRAM_SIZE 0x00800000 /* 8 Mbyte */
#elif defined(CONFIG_FADS) /* Old/new FADS */
#define CFG_SDRAM_SIZE 0x00400000 /* 4 Mbyte */
@@ -186,7 +185,12 @@
#define CFG_MONITOR_BASE CFG_FLASH_BASE
#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 KB for monitor */
+
+#ifdef CONFIG_BZIP2
+#define CFG_MALLOC_LEN (2500 << 10) /* Reserve ~2.5 MB for malloc() */
+#else
#define CFG_MALLOC_LEN (384 << 10) /* Reserve 384 kB for malloc() */
+#endif /* CONFIG_BZIP2 */
/*-----------------------------------------------------------------------
* Cache Configuration
@@ -248,7 +252,16 @@
#define SCCR_MASK SCCR_EBDF11
#define CFG_SCCR (SCCR_TBS|SCCR_COM00|SCCR_DFSYNC00|SCCR_DFBRG00|SCCR_DFNL000|SCCR_DFNH000|SCCR_DFLCD000|SCCR_DFALCD00)
- /*-----------------------------------------------------------------------
+/*-----------------------------------------------------------------------
+ * PLPRCR - PLL, Low-Power, and Reset Control Register 14-22
+ *-----------------------------------------------------------------------
+ * set the PLL, the low-power modes and the reset control
+ */
+#ifndef CFG_PLPRCR
+#define CFG_PLPRCR PLPRCR_TEXPS
+#endif
+
+/*-----------------------------------------------------------------------
*
*-----------------------------------------------------------------------
*
@@ -407,6 +420,20 @@
#define BCSR4_DATA_VOICE ((uint)0x00080000)
#endif /* CONFIG_MPC850 */
+/* BSCR5 exists on MPC86xADS and Duet ADS only */
+
+#define CFG_PHYDEV_ADDR (BCSR_ADDR + 0x20000)
+
+#define BCSR5 (CFG_PHYDEV_ADDR + 0x300)
+
+#define BCSR5_MII2_EN 0x40
+#define BCSR5_MII2_RST 0x20
+#define BCSR5_T1_RST 0x10
+#define BCSR5_ATM155_RST 0x08
+#define BCSR5_ATM25_RST 0x04
+#define BCSR5_MII1_EN 0x02
+#define BCSR5_MII1_RST 0x01
+
/* We don't use the 8259.
*/
#define NR_8259_INTS 0
@@ -419,10 +446,6 @@
* PCMCIA stuff
*-----------------------------------------------------------------------
*/
-#if !defined(CONFIG_MPC823) && !defined(CONFIG_MPC850)
-#define PCMCIA_SLOT_A 1
-#endif
-
#define CFG_PCMCIA_MEM_ADDR (0xE0000000)
#define CFG_PCMCIA_MEM_SIZE ( 64 << 20 )
#define CFG_PCMCIA_DMA_ADDR (0xE4000000)
diff --git a/cpu/mpc8xx/fec.c b/cpu/mpc8xx/fec.c
index 39fe690..c6b84fa 100644
--- a/cpu/mpc8xx/fec.c
+++ b/cpu/mpc8xx/fec.c
@@ -388,7 +388,7 @@ static void fec_pin_init(int fecidx)
fecp->fec_mii_speed <<= 1;
#endif
-#if defined(CONFIG_DUET) && defined(WANT_MII)
+#if defined(CONFIG_MPC885_FAMILY) && defined(WANT_MII)
/* use MDC for MII */
immr->im_ioport.iop_pdpar |= 0x0080;
immr->im_ioport.iop_pddir &= ~0x0080;
@@ -397,7 +397,7 @@ static void fec_pin_init(int fecidx)
if (fecidx == 0) {
#if defined(CONFIG_ETHER_ON_FEC1)
-#if defined(CONFIG_DUET) /* MPC87x/88x have got 2 FECs and different pinout */
+#if defined(CONFIG_MPC885_FAMILY) /* MPC87x/88x have got 2 FECs and different pinout */
#if !defined(CONFIG_RMII)
@@ -489,7 +489,7 @@ static void fec_pin_init(int fecidx)
#if defined(CONFIG_ETHER_ON_FEC2)
-#if defined(CONFIG_DUET) /* MPC87x/88x have got 2 FECs and different pinout */
+#if defined(CONFIG_MPC885_FAMILY) /* MPC87x/88x have got 2 FECs and different pinout */
#if !defined(CONFIG_RMII)
@@ -516,7 +516,7 @@ static void fec_pin_init(int fecidx)
immr->im_cpm.cp_cptr &= ~0x00000028;
#endif /* CONFIG_RMII */
-#endif /* CONFIG_DUET */
+#endif /* CONFIG_MPC885_FAMILY */
#endif /* CONFIG_ETHER_ON_FEC2 */
@@ -533,7 +533,7 @@ static int fec_init (struct eth_device *dev, bd_t * bd)
if (efis->ether_index == 0) {
#if defined(CONFIG_FADS) /* FADS family uses FPGA (BCSR) to control PHYs */
-#if defined(CONFIG_DUET_ADS)
+#if defined(CONFIG_MPC885ADS)
*(vu_char *) BCSR5 &= ~(BCSR5_MII1_EN | BCSR5_MII1_RST);
#else
/* configure FADS for fast (FEC) ethernet, half-duplex */
@@ -553,7 +553,7 @@ static int fec_init (struct eth_device *dev, bd_t * bd)
*bcsr4 |= BCSR4_FETHRST;
udelay (10);
}
-#endif /* CONFIG_DUET_ADS */
+#endif /* CONFIG_MPC885ADS */
#endif /* CONFIG_FADS */
}
@@ -948,7 +948,7 @@ void mii_init (void)
*/
fecp->fec_ievent = 0xffc0;
- /* Setup the pin configuration of the FEC(s)
+ /* Setup the pin configuration of the FEC(s)
*/
fec_pin_init(ether_fcc_info[i].ether_index);
diff --git a/cpu/mpc8xx/speed.c b/cpu/mpc8xx/speed.c
index 165705c..cc011ef 100644
--- a/cpu/mpc8xx/speed.c
+++ b/cpu/mpc8xx/speed.c
@@ -90,7 +90,7 @@ unsigned long measure_gclk(void)
ulong timer2_val;
ulong msr_val;
-#ifdef CONFIG_MPC866_et_al
+#ifdef CFG_8XX_XIN
/* dont use OSCM, only use EXTCLK/512 */
immr->im_clkrst.car_sccr |= SCCR_RTSEL | SCCR_RTDIV;
#else
@@ -162,7 +162,7 @@ unsigned long measure_gclk(void)
timerp->cpmt_tgcr &= ~(TGCR_RST2 | TGCR_FRZ2 | TGCR_STP2);
immr->im_sit.sit_piscr &= ~PISCR_PTE;
-#if defined(CONFIG_MPC866_et_al)
+#if defined(CFG_8XX_XIN)
/* not using OSCM, using XIN, so scale appropriately */
return (((timer2_val + 2) / 4) * (CFG_8XX_XIN/512))/8192 * 100000L;
#else
@@ -183,22 +183,39 @@ int get_clocks (void)
{
DECLARE_GLOBAL_DATA_PTR;
- volatile immap_t *immr = (immap_t *) CFG_IMMR;
-#ifndef CONFIG_8xx_GCLK_FREQ
- gd->cpu_clk = measure_gclk();
-#else /* CONFIG_8xx_GCLK_FREQ */
+ uint immr = get_immr (0); /* Return full IMMR contents */
+ volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000);
+ uint sccr = immap->im_clkrst.car_sccr;
/*
* If for some reason measuring the gclk frequency won't
* work, we return the hardwired value.
* (For example, the cogent CMA286-60 CPU module has no
* separate oscillator for PITRTCLK)
*/
-
+#if defined(CONFIG_8xx_GCLK_FREQ)
gd->cpu_clk = CONFIG_8xx_GCLK_FREQ;
-
+#elif defined(CONFIG_8xx_OSCLK)
+#define PLPRCR_val(a) ((pll & PLPRCR_ ## a ## _MSK) >> PLPRCR_ ## a ## _SHIFT)
+ uint pll = immap->im_clkrst.car_plprcr;
+ uint clk;
+
+ if ((immr & 0x0FFF) >= MPC8xx_NEW_CLK) { /* MPC866/87x/88x series */
+ clk = ((CONFIG_8xx_OSCLK / (PLPRCR_val(PDF)+1)) *
+ (PLPRCR_val(MFI) + PLPRCR_val(MFN) / (PLPRCR_val(MFD)+1))) /
+ (1<<PLPRCR_val(S));
+ } else {
+ clk = CONFIG_8xx_OSCLK * (PLPRCR_val(MF)+1);
+ }
+ if (pll & PLPRCR_CSRC) { /* Low frequency division factor is used */
+ gd->cpu_clk = clk / (2 << ((sccr >> 8) & 7));
+ } else { /* High frequency division factor is used */
+ gd->cpu_clk = clk / (1 << ((sccr >> 5) & 7));
+ }
+#else
+ gd->cpu_clk = measure_gclk();
#endif /* CONFIG_8xx_GCLK_FREQ */
- if ((immr->im_clkrst.car_sccr & SCCR_EBDF11) == 0) {
+ if ((sccr & SCCR_EBDF11) == 0) {
/* No Bus Divider active */
gd->bus_clk = gd->cpu_clk;
} else {
@@ -209,7 +226,7 @@ int get_clocks (void)
return (0);
}
-#else /* CONFIG_MPC866_et_al */
+#else /* CONFIG_MPC866_FAMILY */
static long init_pll_866 (long clk);
@@ -345,7 +362,7 @@ static long init_pll_866 (long clk)
return (n);
}
-#endif /* CONFIG_MPC866_et_al */
+#endif /* CONFIG_MPC866_FAMILY */
#if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M)
/*
diff --git a/include/asm-ppc/8xx_immap.h b/include/asm-ppc/8xx_immap.h
index 2288115..40679cb 100644
--- a/include/asm-ppc/8xx_immap.h
+++ b/include/asm-ppc/8xx_immap.h
@@ -475,7 +475,7 @@ typedef struct comm_proc {
#define lcd_cmap fl_un.fl_un_cmap
char res18[0xE00];
- /* The DUET family has a second FEC here */
+ /* The MPC885 family has a second FEC here */
fec_t cp_fec2;
#define cp_fec1 cp_fec /* consistency macro */
diff --git a/include/common.h b/include/common.h
index a7a3a3a..be86426 100644
--- a/include/common.h
+++ b/include/common.h
@@ -48,17 +48,17 @@ typedef volatile unsigned char vu_char;
defined(CONFIG_MPC859DSL) || \
defined(CONFIG_MPC866) || defined(CONFIG_MPC866T) || \
defined(CONFIG_MPC866P)
-# define CONFIG_MPC866_et_al 1
+# define CONFIG_MPC866_FAMILY 1
#elif defined(CONFIG_MPC870) \
|| defined(CONFIG_MPC875) \
|| defined(CONFIG_MPC880) \
|| defined(CONFIG_MPC885)
-# define CONFIG_DUET 1
+# define CONFIG_MPC885_FAMILY 1
#endif
#if defined(CONFIG_MPC860) \
|| defined(CONFIG_MPC860T) \
- || defined(CONFIG_MPC866_et_al) \
- || defined(CONFIG_DUET)
+ || defined(CONFIG_MPC866_FAMILY) \
+ || defined(CONFIG_MPC885_FAMILY)
# define CONFIG_MPC86x 1
#endif
#elif defined(CONFIG_5xx)
diff --git a/include/commproc.h b/include/commproc.h
index 9facd77..f87620e 100644
--- a/include/commproc.h
+++ b/include/commproc.h
@@ -743,7 +743,8 @@ typedef struct scc_enet {
#endif /* CONFIG_SCC1_ETHERNET */
/*
- * This ENET stuff is for the MPC860TFADS/MPC86xADS/DUET with ethernet on FEC.
+ * This ENET stuff is for the MPC860TFADS/MPC86xADS/MPC885ADS
+ * with ethernet on FEC.
*/
#ifdef CONFIG_FEC_ENET
diff --git a/include/configs/ADS860.h b/include/configs/ADS860.h
index 916272d..df20965 100644
--- a/include/configs/ADS860.h
+++ b/include/configs/ADS860.h
@@ -26,15 +26,17 @@
#define CONFIG_BAUDRATE 38400 /* Console baudrate */
-/* CFG_8XX_FACT * CFG_8XX_XIN = 50 MHz */
#if 0
-#define CFG_8XX_XIN 32768 /* 32.768 kHz input frequency */
-#define CFG_8XX_FACT 0x5F6 /* Multiply by 1526 */
+#define CFG_8XX_FACT 1526 /* 32.768 kHz crystal on XTAL/EXTAL */
#else
-#define CFG_8XX_XIN 4000000 /* 4 MHz input frequency */
-#define CFG_8XX_FACT 12 /* Multiply by 12 */
+#define CFG_8XX_FACT 12 /* 4 MHz oscillator on EXTCLK */
#endif
+#define CFG_PLPRCR (((CFG_8XX_FACT-1) << PLPRCR_MF_SHIFT) | \
+ PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
+
+#define CONFIG_DRAM_50MHZ 1
+
#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
| CFG_CMD_DHCP \
| CFG_CMD_IMMAP \
@@ -42,13 +44,9 @@
| CFG_CMD_PING \
)
-#define CONFIG_DRAM_50MHZ 1
#include "fads.h"
-#define CFG_PLPRCR (((CFG_8XX_FACT-1) << PLPRCR_MF_SHIFT) | \
- PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
-
#define CFG_PC_IDE_RESET ((ushort)0x0008) /* PC 12 */
#endif /* __CONFIG_H */
diff --git a/include/configs/FADS860T.h b/include/configs/FADS860T.h
index e57571b..18de6b0 100644
--- a/include/configs/FADS860T.h
+++ b/include/configs/FADS860T.h
@@ -27,21 +27,19 @@
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#if 0 /* old FADS */
-# define CFG_8XX_FACT 12 /* Multiply by 12 */
-# define CFG_8XX_XIN 4000000 /* 4 MHz in */
+# define CFG_8XX_FACT 12 /* 4 MHz oscillator on EXTCLK */
#else /* new FADS */
-# define CFG_8XX_FACT 10 /* Multiply by 10 */
-# define CFG_8XX_XIN 5000000 /* 5 MHz in */
+# define CFG_8XX_FACT 10 /* 5 MHz oscillator on EXTCLK */
#endif
+#define CFG_PLPRCR (((CFG_8XX_FACT-1) << PLPRCR_MF_SHIFT) | \
+ PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
+
#define CONFIG_DRAM_50MHZ 1
#define CONFIG_SDRAM_50MHZ 1
#include "fads.h"
-#define CFG_PLPRCR (((CFG_8XX_FACT-1) << PLPRCR_MF_SHIFT) | \
- PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
-
#ifdef USE_REAL_FLASH_VALUES
/*
* These values fit our FADS860T ...
@@ -53,6 +51,6 @@
#define CFG_BR0_PRELIM 0x02800001 /* Real values for the board */
#endif
-#define CFG_DAUGHTERBOARD /* FADS has processor-specfic daughterboard */
+#define CFG_DAUGHTERBOARD /* FADS has processor-specific daughterboard */
#endif /* __CONFIG_H */
diff --git a/include/configs/MPC86xADS.h b/include/configs/MPC86xADS.h
index a6e2606..565f9bb 100644
--- a/include/configs/MPC86xADS.h
+++ b/include/configs/MPC86xADS.h
@@ -33,19 +33,14 @@
#undef CONFIG_8xx_CONS_NONE
#define CONFIG_BAUDRATE 38400
-# define CFG_8XX_FACT 5 /* Multiply by 5 */
-# define CFG_8XX_XIN 10000000 /* 10 MHz in */
+#define CONFIG_8xx_OSCLK 10000000 /* 10MHz oscillator on EXTCLK */
#define CONFIG_DRAM_50MHZ 1
#define CONFIG_SDRAM_50MHZ 1
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register 14-22
- *-----------------------------------------------------------------------
- * set the PLL, the low-power modes and the reset control
- */
-#define CFG_PLPRCR ((CFG_8XX_FACT << PLPRCR_MFI_SHIFT) | PLPRCR_TEXPS)
-
#include "fads.h"
+#define CFG_OR5_PRELIM 0xFFFF8110 /* 64Kbyte address space */
+#define CFG_BR5_PRELIM (CFG_PHYDEV_ADDR | BR_PS_8 | BR_V)
+
#endif /* __CONFIG_H */
diff --git a/include/configs/DUET_ADS.h b/include/configs/MPC885ADS.h
index 8a40257..7f0b06a 100644
--- a/include/configs/DUET_ADS.h
+++ b/include/configs/MPC885ADS.h
@@ -11,7 +11,7 @@
#define __CONFIG_H
/* Board type */
-#define CONFIG_DUET_ADS 1 /* Duet (MPC87x/88x) ADS */
+#define CONFIG_MPC885ADS 1 /* Duet (MPC87x/88x) ADS */
#define CONFIG_FADS 1 /* We are FADS compatible (more or less) */
#define CONFIG_MPC885 1 /* MPC885 CPU (Duet family) */
@@ -21,33 +21,25 @@
#undef CONFIG_8xx_CONS_NONE
#define CONFIG_BAUDRATE 38400
-#define CFG_8XX_FACT 5 /* Multiply by 5 */
-#define CFG_8XX_XIN 10000000 /* 10 MHz in */
+#define CONFIG_8xx_OSCLK 10000000 /* 10 MHz oscillator on EXTCLK */
+
+#define CFG_PLPRCR ((1 << PLPRCR_MFD_SHIFT) | (12 << PLPRCR_MFI_SHIFT) | PLPRCR_TEXPS)
#define CONFIG_SDRAM_50MHZ 1
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register 14-22
- *-----------------------------------------------------------------------
- * set the PLL, the low-power modes and the reset control
- */
-#define CFG_PLPRCR ((CFG_8XX_FACT << PLPRCR_MFI_SHIFT) | PLPRCR_TEXPS)
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
+ | CFG_CMD_DHCP \
+ | CFG_CMD_IMMAP \
+ | CFG_CMD_MII \
+ | CFG_CMD_PING \
+ )
#include "fads.h"
-#define CFG_PHYDEV_ADDR (BCSR_ADDR + 0x20000)
+#undef CFG_SCCR
+#define CFG_SCCR (SCCR_TBS|SCCR_EBDF11)
#define CFG_OR5_PRELIM 0xFFFF8110 /* 64Kbyte address space */
#define CFG_BR5_PRELIM (CFG_PHYDEV_ADDR | BR_PS_8 | BR_V)
-#define BCSR5 (CFG_PHYDEV_ADDR + 0x300)
-
-#define BCSR5_MII2_EN 0x40
-#define BCSR5_MII2_RST 0x20
-#define BCSR5_T1_RST 0x10
-#define BCSR5_ATM155_RST 0x08
-#define BCSR5_ATM25_RST 0x04
-#define BCSR5_MII1_EN 0x02
-#define BCSR5_MII1_RST 0x01
-
#endif /* __CONFIG_H */