diff options
| -rw-r--r-- | cpu/mpc86xx/cpu.c | 37 | ||||
| -rw-r--r-- | cpu/mpc86xx/spd_sdram.c | 14 |
2 files changed, 39 insertions, 12 deletions
diff --git a/cpu/mpc86xx/cpu.c b/cpu/mpc86xx/cpu.c index 36da777..5c6c2ee 100644 --- a/cpu/mpc86xx/cpu.c +++ b/cpu/mpc86xx/cpu.c @@ -169,7 +169,7 @@ soft_restart(unsigned long addr) int set_px_sysclk(ulong sysclk) { - u8 sysclk_s, sysclk_r, sysclk_v, vclkh, vclkl, sysclk_aux,tmp; + u8 sysclk_s, sysclk_r, sysclk_v, vclkh, vclkl, sysclk_aux; /* Per table 27, page 58 of MPC8641HPCN spec*/ switch(sysclk) @@ -354,6 +354,24 @@ void set_px_go_with_watchdog(void) out8(PIXIS_BASE+PIXIS_VCTL,tmp); } +int disable_watchdog(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + u8 tmp; + tmp = in8(PIXIS_BASE+PIXIS_VCTL); + tmp = tmp & 0x1E; + out8(PIXIS_BASE+PIXIS_VCTL,tmp); + tmp = in8(PIXIS_BASE + PIXIS_VCTL); + tmp &= ~ 0x08; /* setting VCTL[WDEN] to 0 to disable watch dog */ + out8(PIXIS_BASE + PIXIS_VCTL, tmp); + return 0; +} + +U_BOOT_CMD( + diswd, 1, 0, disable_watchdog, + "diswd - Disable watchdog timer \n", + NULL +); + /* This function takes the non-integral cpu:mpx pll ratio * and converts it to an integer that can be used to assign * FPGA register values. @@ -509,18 +527,27 @@ do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) goto my_usage; while(1); /* Not reached */ - } else { - /* Reset from next bank without changing frequencies */ + } else if(argv[2][1] == 'd'){ + /* Reset from next bank without changing frequencies but with watchdog timer enabled */ read_from_px_regs(0); read_from_px_regs_altbank(0); - if(argc > 2) - goto my_usage; printf("Setting registers VCFGEN1, VBOOT, and VCTL\n"); set_altbank(); read_from_px_regs_altbank(1); printf("Enabling watchdog timer on the FPGA and resetting board to boot from the other bank....\n"); set_px_go_with_watchdog(); while(1); /* Not reached */ + } else { + /* Reset from next bank without changing frequency and without watchdog timer enabled */ + read_from_px_regs(0); + read_from_px_regs_altbank(0); + if(argc > 2) + goto my_usage; + printf("Setting registers VCFGNE1, VBOOT, and VCTL\n"); + set_altbank(); + read_from_px_regs_altbank(1); + printf("Resetting board to boot from the other bank....\n"); + set_px_go(); } default: diff --git a/cpu/mpc86xx/spd_sdram.c b/cpu/mpc86xx/spd_sdram.c index 130c8fc..f30bbbd 100644 --- a/cpu/mpc86xx/spd_sdram.c +++ b/cpu/mpc86xx/spd_sdram.c @@ -1088,24 +1088,24 @@ unsigned int enable_ddr(unsigned int ddr_num) * If the user wanted ECC (enabled via sdram_cfg[2]) */ if (config == 0x02) { + ddr->err_disable = 0x00000000; + asm("sync;isync;"); + ddr->err_sbe = 0x00ff0000; + ddr->err_int_en = 0x0000000d; sdram_cfg_1 |= 0x20000000; /* ECC_EN */ } #endif /* - * REV1 uses 1T timing. - * REV2 may use 1T or 2T as configured by the user. + * Set 1T or 2T timing based on 1 or 2 modules */ { - uint pvr = get_pvr(); - - if (pvr != PVR_85xx_REV1) { -#if defined(CONFIG_DDR_2T_TIMING) + if (!(no_dimm1 || no_dimm2)) { /* + * 2T timing,because both DIMMS are present. * Enable 2T timing by setting sdram_cfg[16]. */ sdram_cfg_1 |= 0x8000; /* 2T_EN */ -#endif } } |