diff options
| -rw-r--r-- | board/ti/am335x/board.c | 7 | ||||
| -rw-r--r-- | board/ti/am335x/mux.c | 20 |
2 files changed, 26 insertions, 1 deletions
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c index 013ad88..e5ad76e 100644 --- a/board/ti/am335x/board.c +++ b/board/ti/am335x/board.c @@ -68,6 +68,11 @@ static inline int board_is_evm_sk(void) return !strncmp("A335X_SK", header.name, HDR_NAME_LEN); } +static inline int board_is_idk(void) +{ + return !strncmp(header.config, "SKU#02", 6); +} + /* * Read header information from EEPROM into global structure. */ @@ -378,7 +383,7 @@ int board_eth_init(bd_t *bis) return -1; } - if (board_is_bone() || board_is_bone_lt()) { + if (board_is_bone() || board_is_bone_lt() || board_is_idk()) { writel(MII_MODE_ENABLE, &cdev->miisel); cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if = PHY_INTERFACE_MODE_MII; diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c index acb8ff3..8437ef5 100644 --- a/board/ti/am335x/mux.c +++ b/board/ti/am335x/mux.c @@ -69,6 +69,17 @@ static struct module_pin_mux mmc0_pin_mux[] = { {-1}, }; +static struct module_pin_mux mmc0_no_cd_pin_mux[] = { + {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */ + {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */ + {OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT1 */ + {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */ + {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */ + {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */ + {OFFSET(mcasp0_aclkr), (MODE(4) | RXACTIVE)}, /* MMC0_WP */ + {-1}, +}; + static struct module_pin_mux mmc0_pin_mux_sk_evm[] = { {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */ {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */ @@ -250,6 +261,15 @@ void enable_board_pin_mux(struct am335x_baseboard_id *header) configure_module_pin_mux(mmc1_pin_mux); configure_module_pin_mux(spi0_pin_mux); } + } else if (!strncmp(header->config, "SKU#02", 6)) { + /* + * Industrial Motor Control (IDK) + * note: IDK console is on UART3 by default. + * So u-boot mus be build with CONFIG_SERIAL4 and + * CONFIG_CONS_INDEX=4 + */ + configure_module_pin_mux(mii1_pin_mux); + configure_module_pin_mux(mmc0_no_cd_pin_mux); } else if (!strncmp(header->name, "A335X_SK", HDR_NAME_LEN)) { /* Starter Kit EVM */ configure_module_pin_mux(i2c1_pin_mux); |