diff options
-rw-r--r-- | CREDITS | 536 | ||||
-rw-r--r-- | arch/arm/Kconfig | 4 | ||||
-rw-r--r-- | arch/arm/include/asm/arch-at91/at91_shdwn.h | 35 | ||||
-rw-r--r-- | arch/powerpc/cpu/mpc5xxx/Kconfig | 3 | ||||
-rw-r--r-- | arch/powerpc/cpu/mpc8xx/Kconfig | 3 | ||||
-rw-r--r-- | board/kosagi/novena/MAINTAINERS | 6 | ||||
-rw-r--r-- | board/matrix_vision/common/Makefile | 8 | ||||
-rw-r--r-- | board/matrix_vision/common/mv_common.c | 112 | ||||
-rw-r--r-- | board/matrix_vision/common/mv_common.h | 9 | ||||
-rw-r--r-- | drivers/power/twl4030.c | 6 | ||||
-rw-r--r-- | include/twl4030.h | 2 | ||||
-rw-r--r-- | include/usb/omap1510_udc.h | 174 | ||||
-rw-r--r-- | tools/kwbimage.c | 37 |
13 files changed, 42 insertions, 893 deletions
diff --git a/CREDITS b/CREDITS deleted file mode 100644 index 43d4764..0000000 --- a/CREDITS +++ /dev/null @@ -1,536 +0,0 @@ -# -# Parts of the development effort for this project have been -# sponsored by SIEMENS AG, Austria. Thanks to SIEMENS for -# supporting an Open Source project! -# -# -# This is at least a partial credits-file of individual people that -# have contributed to the U-Boot project. It is sorted by name and -# formatted to allow easy grepping and beautification by scripts. -# The fields are: name (N), email (E), web-address (W), PGP key ID -# and fingerprint (P), description (D), and snail-mail address (S). -# Thanks, -# -# Wolfgang Denk -#---------- - -N: Dr. Bruno Achauer -E: bruno@exet-ag.de -D: Support for NetBSD (both as host and target system) - -N: Guillaume Alexandre -E: guillaume.alexandre@gespac.ch -D: Add PCIPPC6 configuration - -N: Pantelis Antoniou -E: panto@intracom.gr -D: NETVIA & NETPHONE board support, ARTOS support. -D: Support for Silicon Turnkey eXpress XTc - -N: Pierre Aubert -E: <p.aubert@staubli.com> -D: Support for RPXClassic board - -N: Yuli Barcohen -E: yuli@arabellasw.com -D: Unified support for Motorola MPC826xADS/MPC8272ADS/PQ2FADS boards. -D: Support for Zephyr Engineering ZPC.1900 board. -D: Support for Interphase iSPAN boards. -D: Support for Analogue&Micro Adder boards. -D: Support for Analogue&Micro Rattler boards. -W: http://www.arabellasw.com - -N: Jerry van Baren -E: <vanbaren@cideas.com> -D: BedBug port to 603e core (MPC82xx). Code for enhanced memory test. - -N: Pavel Bartusek -E: <pba@sysgo.com> -D: Reiserfs support -W: http://www.elinos.com - -N: Andre Beaudin -E: <andre.beaudin@colubris.com> -D: PCMCIA, Ethernet, TFTP - -N: Jon Benediktsson -E: jonb@marel.is -D: Support for Marel V37 board - -N: Raphael Bossek -E: raphael.bossek@solutions4linux.de -D: 8xxrom-0.3.0 - -N: Cliff Brake -E: cliff.brake@gmail.com -D: Port to Vibren PXA255 IDP platform -W: http://www.vibren.com -W: http://bec-systems.com - -N: Rick Bronson -E: rick@efn.org -D: Atmel AT91RM9200DK and NAND support - -N: David Brown -E: DBrown03@harris.com -D: Extensions to 8xxrom-0.3.0 - -N: Oliver Brown -E: obrown@adventnetworks.com -D: Port to the gw8260 board - -N: Jonathan De Bruyne -E: jonathan.debruyne@siemens.atea.be -D: Port to Siemens IAD210 board - -N: Ken Chou -E: kchou@ieee.org -D: Support for A3000 SBC board - -N: Conn Clark -E: clark@esteem.com -D: ESTEEM192E support - -N: Magnus Damm -E: damm@opensource.se -D: 8xxrom - -N: Richard Danter -E: richard.danter@windriver.com -D: Support for Wind River PPMC 7xx/74xx boards - -N: George G. Davis -E: gdavis@mvista.com -D: Board ports for ADS GraphicsClient+ and Intel Assabet - -N: Arun Dharankar -E: ADharankar@ATTBI.Com -D: threads / scheduler example code - -N: K?ri Dav??sson -E: kd@flaga.is -D: FLAGA DM Support - -N: Wolfgang Denk -E: wd@denx.de -D: U-Boot initial version, continuing maintenance, ARMBoot merge -W: http://www.denx.de - -N: Dan A. Dickey -E: ddickey@charter.net -D: FADS Support - -N: Mike Dunn -E: mikedunn@newsguy.com -D: Palmtreo680 board, docg4 nand flash driver - -N: Dave Ellis -E: DGE@sixnetio.com -D: EEPROM Speedup - -N: Daniel Engstr?m -E: daniel@omicron.se -D: x86 port, Support for sc520_cdp board - -N: Hayden Fraser -E: Hayden.Fraser@freescale.com -D: Support for ColdFire MCF5253 -W: www.freescale.com - -N: Dr. Wolfgang Grandegger -E: wg@denx.de -D: Support for Interphase 4539 T1/E1/J1 PMC, CCM, SCM boards -W: www.denx.de - -N: Peter Figuli -E: peposh@etc.sk -D: Support for WEP EP250 (PXA) board - -N: Thomas Frieden -E: ThomasF@hyperion-entertainment.com -D: Support for AmigaOne - -N: Paul Gortmaker -E: paul.gortmaker@windriver.com -D: Support for WRS SBC8347/8349 boards - -N: Frank Gottschling -E: fgottschling@eltec.de -D: Support for ELTEC MHPC/ELPPC boards, cfb-console, i8042, SMI LynxEM -W: www.eltec.de - -N: Marius Groeger -E: mgroeger@sysgo.de -D: MBX Support, board specific function interface, EST SBC8260 support; initial support for StrongARM (LART), ARM720TDMI (implementa A7) -W: www.elinos.com - -N: Kirk Haderlie -E: khaderlie@vividimage.com -D: Added TFTP to 8xxrom (-> 0.3.1) - -N: Chris Hallinan -E: clh@net1plus.com -D: DHCP Support - -N: Anne-Sophie Harnois -E: Anne-Sophie.Harnois@nextream.fr -D: Port to Walnut405 board - -N: Andreas Heppel -E: aheppel@sysgo.de -D: CPU Support for MPC 75x - -N: Josh Huber -E: huber@alum.wpi.edu -D: Port to the Galileo Evaluation Board, and the MPC74xx cpu series. -W: http://www.mclx.com/ - -H: Stuart Hughes -E: stuarth@lineo.com -D: Port to MPC8260ADS board - -H: Rich Ireland -E: r.ireland@computer.org -D: FPGA device configuration driver - -H: Mark Jackson -E: mpfj@mimc.co.uk -D: Port to MIMC200 board - -N: Gary Jennejohn -E: garyj@jennejohn.org -D: Support for Samsung ARM920T S3C2400X, ARM920T "TRAB" -W: www.denx.de - -N: Murray Jensen -E: Murray.Jensen@csiro.au -D: Initial 8260 support; GDB support -D: Port to Cogent+Hymod boards; Hymod Board Database - -N: Yoo. Jonghoon -E: yooth@ipone.co.kr -D: Added port to the RPXlite board - -N: Mark Jonas -E: mark.jonas@freescale.com -D: Support for Freescale Total5200 platform -W: http://www.mobilegt.com/ - -N: Mark Jonas -E: mark.jonas@de.bosch.com -D: Support for MPR2 board - -N: Sam Song -E: samsongshu@yahoo.com.cn -D: Port to the RPXlite_DW board - -N: Brad Kemp -E: Brad.Kemp@seranoa.com -D: Port to Windriver ppmc8260 board - -N: Sangmoon Kim -E: dogoil@etinsys.com -D: Support for debris board -D: Support for KVME080 board - -N: Frederick W. Klatt -E: fred.klatt@windriver.com -D: Support for Wind River SBC8540/SBC8560 boards - -N: Thomas Koeller -E: tkoeller@gmx.net -D: Port to Motorola Sandpoint 3 (MPC8240) - -N: Raghu Krishnaprasad -E: Raghu.Krishnaprasad@fci.com -D: Support for Adder-II MPC852T evaluation board -W: http://www.forcecomputers.com - -N: Sergey Kubushyn -E: ksi@koi8.net -D: Support for various TI DaVinci based boards. - -N: Bernhard Kuhn -E: bkuhn@metrowerks.com -D Support for Coldfire CPU; Support for Motorola M5272C3 and M5282EVB boards - -N: Prakash Kumar -E: prakash@embedx.com -D Support for Intrinsyc CERF PXA250 board. - -N: Thomas Lange -E: thomas@corelatus.se -D: Support for GTH, GTH2 and dbau1x00 boards; lots of PCMCIA fixes - -N: The LEOX team -E: team@leox.org -D: Support for LEOX boards, DS164x RTC -W: http://www.leox.org - -N: TsiChung Liew -E: Tsi-Chung.Liew@freescale.com -D: Support for ColdFire MCF523x, MCF532x, MCF5445x, MCF547x_8x -W: www.freescale.com - -N: Leif Lindholm -E: leif.lindholm@i3micro.com -D: Support for AMD dbau1550 board. - -N: Stephan Linz -E: linz@li-pro.net -D: Support for Nios Stratix Development Kit (DK-1S10) -D: Support for SSV ADNP/ESC1 (Nios Cyclone) -W: http://www.li-pro.net - -N: Dave Liu -E: daveliu@freescale.com -D: Support for MPC8315, MPC832x, MPC8360, MPC837x -W: www.freescale.com - -N: Raymond Lo -E: lo@routefree.com -D: Support for DOS partitions - -N: James MacAulay -E: james.macaulay@amirix.com -D: Suppport for Amirix AP1000 -W: www.amirix.com - -N: Dan Malek -E: dan@embeddedalley.com -D: FADSROM, the grandfather of all of this -D: Support for Silicon Turnkey eXpress XTc - -N: Andrea "llandre" Marson -E: andrea.marson@dave-tech.it -D: Port to PPChameleonEVB board -W: www.dave-tech.it - -N: Reinhard Meyer -E: r.meyer@emk-elektronik.de -D: Port to EMK TOP860 Module - -N: Jay Monkman -E: jtm@smoothsmoothie.com -D: EST SBC8260 support - -N: Frank Morauf -E: frank.morauf@salzbrenner.com -D: Support for Embedded Planet RPX Super Board - -N: David M?ller -E: d.mueller@elsoft.ch -D: Support for Samsung ARM920T SMDK2410 eval board - -N: Scott McNutt -E: smcnutt@psyent.com -D: Support for Altera Nios-32 CPU -D: Support for Altera Nios-II CPU -D: Support for Nios Cyclone Development Kit (DK-1C20) -W: http://www.psyent.com - -N: Rolf Offermanns -E: rof@sysgo.de -D: Initial support for SSV-DNP1110, SMC91111 driver -W: www.elinos.com - -N: John Otken -E: jotken@softadvances.com -D: Support for AMCC Luan 440SP board - -N: Tolunay Orkun -E: torkun@nextio.com -D: Support for Cogent CSB272 & CSB472 boards - -N: Keith Outwater -E: keith_outwater@mvis.com -D: Support for generic/custom MPC860T boards (GEN860T, GEN860T_SC) - -N: Frank Panno -E: fpanno@delphintech.com -D: Support for Embedded Planet EP8260 Board - -N: Denis Peter -E: d.peter@mpl.ch -D: Support for 4xx SCSI, floppy, CDROM, CT69000 video, ... -D: Support for PIP405 board -D: Support for MIP405 board - -N: Dave Peverley -E: dpeverley@mpc-data.co.uk -W: http://www.mpc-data.co.uk -D: OMAP730 P2 board support - -N: Bill Pitts -E: wlp@mindspring.com -D: BedBug embedded debugger code - -N: Daniel Poirot -E: dan.poirot@windriver.com -D: Support for the Wind River sbc405, sbc8240 board -W: http://www.windriver.com - -N: Stelian Pop -E: stelian@popies.net -D: Atmel AT91CAP9ADK support - -N: Ricardo Ribalda Delgado -E: ricardo.ribalda@uam.es -D: PPC440x5 (Virtex5), ML507 Board, eeprom_simul, adt7460, v5fx30teval -D: Virtex ppc440 generic architecture -D: Virtex ppc405 generic architecture -W: http://www.ii.uam.es/~rribalda - -N: Stefan Roese -E: sr@denx.de -D: AMCC PPC4xx Support -W: http://www.denx.de - -N: Erwin Rol -E: erwin@muffin.org -D: boot support for RTEMS - -N: Paul Ruhland -E: pruhland@rochester.rr.com -D: Port to Logic Zoom LH7A40x SDK board(s) - -N: Neil Russell -E: caret@c-side.com -D: Author of LiMon-1.4.2, which contributed some ideas - -N: Travis B. Sawyer -E: travis.sawyer@sandburst.com -D: Support for AMCC PPC440GX, XES XPedite1000 440GX PrPMC board. AMCC 440gx Ref Platform (Ocotea) - -N: Paolo Scaffardi -E: arsenio@tin.it -D: FADS823 configuration, MPC823 video support, I2C, wireless keyboard, lots more - -N: Andre Schwarz -E: andre.schwarz@matrix-vision.de -D: Support for Matrix Vision boards (MVBLM7/MVBC_P/MVSMR) - -N: Robert Schwebel -E: r.schwebel@pengutronix.de -D: Support for csb226 and innokom boards (PXA2xx) - -N: Aaron Sells -E: sellsa@embeddedplanet.com -D: Support for EP82xxM - -N: Art Shipkowski -E: art@videon-central.com -D: Support for NetSilicon NS7520 -D: Support for ColdFire MCF5275 - -N: Jeremy C. Andrus -E: jeremy@jeremya.com -D: ColdFire MCF5249 initialization code -W: jeremya.com - -N: Michal Simek -E: monstr@monstr.eu -D: Support for Microblaze, ML401, XUPV2P board -W: www.monstr.eu - -N: Yasushi Shoji -E: yashi@atmark-techno.com -D: Support for Xilinx MicroBlaze, for Atmark Techno SUZAKU FPGA board - -N: Kurt Stremerch -E: kurt@exys.be -D: Support for Exys XSEngine board - -N: Andrea Scian -E: andrea.scian@dave-tech.it -D: Port to B2 board -W: www.dave-tech.it - -N: Timur Tabi -E: timur@freescale.com -D: Support for MPC8349E-mITX -W: www.freescale.com - -N: Rob Taylor -E: robt@flyingpig.com -D: Port to MBX860T and Sandpoint8240 - -N: Erik Theisen -E: etheisen@mindspring.com -D: MBX8xx and many other patches - -N: Jim Thompson -E: jim@musenki.com -D: Support for MUSENKI board - -N: Rune Torgersen -E: <runet@innovsys.com> -D: Support for Motorola MPC8266ADS board - -N: Greg Ungerer -E: greg.ungerer@opengear.com -D: Support for ks8695 CPU, and OpenGear cmXXXX boards - -N: David Updegraff -E: dave@cray.com -D: Port to Cray L1 board; DHCP vendor extensions - -N: Christian Vejlbo -E: christian.vejlbo@tellabs.com -D: FADS860T ethernet support - -N: Robert Whaley -E: rwhaley@applieddata.net -D: Port to ARM PXA27x adsvix SBC - -N: Martin Winistoerfer -E: martinwinistoerfer@gmx.ch -D: Port to MPC555/556 microcontrollers and support for cmi board - -N: David Wu -E: support@arcturusnetworks.com -D: Mercury Security EP2500 -W: http://www.arcturusnetworks.com - -N: Ming-Len Wu -E: minglen_wu@techware.com.tw -D: Motorola MX1ADS board support -W: http://www.techware.com.tw/ - -N: Xianghua Xiao -E: x.xiao@motorola.com -D: Support for Motorola 85xx(PowerQUICC III) chip, MPC8540ADS and MPC8560ADS boards. - -N: John Zhan -E: zhanz@sinovee.com -D: Support for SinoVee Microsystems SC8xx SBC - -N: Alex Zuepke -E: azu@sysgo.de -D: Overall improvements on StrongARM, ARM720TDMI; Support for Tuxscreen; initial PCMCIA support for ARM -W: www.elinos.com - -N: Nobuhiro Iwamatsu -E: iwamatsu@nigauri.org -D: Support for SuperH, MS7750SE01 and MS7722SE01 boards. -W: http://www.nigauri.org/~iwamatsu/ - -N: Alan Lu -E: alnalu001@gmail.com -D: Support for Artila M-501 starter kit -W: http://www.artila.com/ - -N: Kimmo Leppala -E: kimmo.leppala@sysart.fi -D: Support for Artila M-501 starter kit -W: http://www.sysart.fi/ - -N: Timo Tuunainen -E: timo.tuunainen@sysart.fi -D: Support for Artila M-501 starter kit -W: http://www.sysart.fi/ - -N: Philip Balister -E: philip@opensdr.com -D: Port to Lyrtech SFFSDR development board. -W: www.opensdr.com diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 171ad03..43700c3 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -177,10 +177,6 @@ config TARGET_ETHERNUT5 bool "Support ethernut5" select CPU_ARM926EJS -config TARGET_TOP9000 - bool "Support top9000" - select CPU_ARM926EJS - config TARGET_MEESC bool "Support meesc" select CPU_ARM926EJS diff --git a/arch/arm/include/asm/arch-at91/at91_shdwn.h b/arch/arm/include/asm/arch-at91/at91_shdwn.h deleted file mode 100644 index 18d9ea6..0000000 --- a/arch/arm/include/asm/arch-at91/at91_shdwn.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Copyright (C) 2010 - * Reinhard Meyer, reinhard.meyer@emk-elektronik.de - * - * Shutdown Controller - * Based on AT91SAM9XE datasheet - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef AT91_SHDWN_H -#define AT91_SHDWN_H - -#ifndef __ASSEMBLY__ - -struct at91_shdwn { - u32 cr; /* Control Rer. WO */ - u32 mr; /* Mode Register RW 0x00000003 */ - u32 sr; /* Status Register RO 0x00000000 */ -}; - -#endif /* __ASSEMBLY__ */ - -#define AT91_SHDW_CR_KEY 0xa5000000 -#define AT91_SHDW_CR_SHDW 0x00000001 - -#define AT91_SHDW_MR_RTTWKEN 0x00010000 -#define AT91_SHDW_MR_CPTWK0 0x000000f0 -#define AT91_SHDW_MR_WKMODE0H2L 0x00000002 -#define AT91_SHDW_MR_WKMODE0L2H 0x00000001 - -#define AT91_SHDW_SR_RTTWK 0x00010000 -#define AT91_SHDW_SR_WAKEUP0 0x00000001 - -#endif diff --git a/arch/powerpc/cpu/mpc5xxx/Kconfig b/arch/powerpc/cpu/mpc5xxx/Kconfig index a1305bc..c1fb92a 100644 --- a/arch/powerpc/cpu/mpc5xxx/Kconfig +++ b/arch/powerpc/cpu/mpc5xxx/Kconfig @@ -56,9 +56,6 @@ config TARGET_TOTAL5200 config TARGET_V38B bool "Support v38b" -config TARGET_TOP5200 - bool "Support TOP5200" - config TARGET_CPCI5200 bool "Support cpci5200" diff --git a/arch/powerpc/cpu/mpc8xx/Kconfig b/arch/powerpc/cpu/mpc8xx/Kconfig index 011f4b4..e447748e 100644 --- a/arch/powerpc/cpu/mpc8xx/Kconfig +++ b/arch/powerpc/cpu/mpc8xx/Kconfig @@ -40,9 +40,6 @@ config TARGET_RRVISION config TARGET_SPD823TS bool "Support SPD823TS" -config TARGET_TOP860 - bool "Support TOP860" - config TARGET_KUP4K bool "Support KUP4K" diff --git a/board/kosagi/novena/MAINTAINERS b/board/kosagi/novena/MAINTAINERS new file mode 100644 index 0000000..d3471c2 --- /dev/null +++ b/board/kosagi/novena/MAINTAINERS @@ -0,0 +1,6 @@ +NOVENA BOARD +M: Marek Vasut <marex@denx.de> +S: Maintained +F: board/kosagi/novena/ +F: include/configs/novena.h +F: configs/novena_defconfig diff --git a/board/matrix_vision/common/Makefile b/board/matrix_vision/common/Makefile deleted file mode 100644 index 699da1c..0000000 --- a/board/matrix_vision/common/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = mv_common.o diff --git a/board/matrix_vision/common/mv_common.c b/board/matrix_vision/common/mv_common.c deleted file mode 100644 index 1be5aba..0000000 --- a/board/matrix_vision/common/mv_common.c +++ /dev/null @@ -1,112 +0,0 @@ -/* - * (C) Copyright 2008 - * Andre Schwarz, Matrix Vision GmbH, andre.schwarz@matrix-vision.de - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <malloc.h> -#include <environment.h> -#include <fpga.h> -#include <asm/io.h> - -DECLARE_GLOBAL_DATA_PTR; - -#ifndef CONFIG_ENV_IS_NOWHERE -static char* entries_to_keep[] = { - "serial#", "ethaddr", "eth1addr", "model_info", "sensor_cnt", - "fpgadatasize", "ddr_size", "use_dhcp", "use_static_ipaddr", - "static_ipaddr", "static_netmask", "static_gateway", - "syslog", "watchdog", "netboot", "evo8serialnumber" }; - -#define MV_MAX_ENV_ENTRY_LENGTH 64 -#define MV_KEEP_ENTRIES ARRAY_SIZE(entries_to_keep) - -void mv_reset_environment(void) -{ - int i; - char *s[MV_KEEP_ENTRIES]; - char entries[MV_KEEP_ENTRIES][MV_MAX_ENV_ENTRY_LENGTH]; - - printf("\n*** RESET ENVIRONMENT ***\n"); - - memset(entries, 0, MV_KEEP_ENTRIES * MV_MAX_ENV_ENTRY_LENGTH); - for (i = 0; i < MV_KEEP_ENTRIES; i++) { - s[i] = getenv(entries_to_keep[i]); - if (s[i]) { - printf("save '%s' : %s\n", entries_to_keep[i], s[i]); - strncpy(entries[i], s[i], MV_MAX_ENV_ENTRY_LENGTH); - } - } - - gd->env_valid = 0; - env_relocate(); - - for (i = 0; i < MV_KEEP_ENTRIES; i++) { - if (s[i]) { - printf("restore '%s' : %s\n", entries_to_keep[i], s[i]); - setenv(entries_to_keep[i], s[i]); - } - } - - saveenv(); -} -#endif - -int mv_load_fpga(void) -{ - int result; - size_t data_size = 0; - void *fpga_data = NULL; - char *datastr = getenv("fpgadata"); - char *sizestr = getenv("fpgadatasize"); - - if (getenv("skip_fpga")) { - printf("found 'skip_fpga' -> FPGA _not_ loaded !\n"); - return -1; - } - printf("loading FPGA\n"); - - if (datastr) - fpga_data = (void *)simple_strtoul(datastr, NULL, 16); - if (sizestr) - data_size = (size_t)simple_strtoul(sizestr, NULL, 16); - if (!data_size) { - printf("fpgadatasize invalid -> FPGA _not_ loaded !\n"); - return -1; - } - - result = fpga_load(0, fpga_data, data_size, BIT_FULL); - if (!result) - bootstage_mark(BOOTSTAGE_ID_START); - - return result; -} - -u8 *dhcp_vendorex_prep(u8 *e) -{ - char *ptr; - - /* DHCP vendor-class-identifier = 60 */ - if ((ptr = getenv("dhcp_vendor-class-identifier"))) { - *e++ = 60; - *e++ = strlen(ptr); - while (*ptr) - *e++ = *ptr++; - } - /* DHCP_CLIENT_IDENTIFIER = 61 */ - if ((ptr = getenv("dhcp_client_id"))) { - *e++ = 61; - *e++ = strlen(ptr); - while (*ptr) - *e++ = *ptr++; - } - - return e; -} - -u8 *dhcp_vendorex_proc(u8 *popt) -{ - return NULL; -} diff --git a/board/matrix_vision/common/mv_common.h b/board/matrix_vision/common/mv_common.h deleted file mode 100644 index 3693943..0000000 --- a/board/matrix_vision/common/mv_common.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * Copyright 2008 Matrix Vision GmbH - * - * SPDX-License-Identifier: GPL-2.0+ - */ - - -extern int mv_load_fpga(void); -extern void mv_reset_environment(void); diff --git a/drivers/power/twl4030.c b/drivers/power/twl4030.c index 3e50310..e578ae6 100644 --- a/drivers/power/twl4030.c +++ b/drivers/power/twl4030.c @@ -98,4 +98,10 @@ void twl4030_power_mmc_init(void) TWL4030_PM_RECEIVER_VMMC1_VSEL_32, TWL4030_PM_RECEIVER_VMMC1_DEV_GRP, TWL4030_PM_RECEIVER_DEV_GRP_P1); + + /* Set VMMC2 to 3.15 Volts */ + twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VMMC2_DEDICATED, + TWL4030_PM_RECEIVER_VMMC2_VSEL_32, + TWL4030_PM_RECEIVER_VMMC2_DEV_GRP, + TWL4030_PM_RECEIVER_DEV_GRP_P1); } diff --git a/include/twl4030.h b/include/twl4030.h index 093c61d..18795a6 100644 --- a/include/twl4030.h +++ b/include/twl4030.h @@ -395,6 +395,8 @@ #define TWL4030_PM_RECEIVER_VDAC_VSEL_18 0x03 #define TWL4030_PM_RECEIVER_VMMC1_VSEL_30 0x02 #define TWL4030_PM_RECEIVER_VMMC1_VSEL_32 0x03 +#define TWL4030_PM_RECEIVER_VMMC2_VSEL_30 0x0B +#define TWL4030_PM_RECEIVER_VMMC2_VSEL_32 0x0C #define TWL4030_PM_RECEIVER_VSIM_VSEL_18 0x03 /* Device Selection in PM Receiver Module */ diff --git a/include/usb/omap1510_udc.h b/include/usb/omap1510_udc.h deleted file mode 100644 index adfbf54..0000000 --- a/include/usb/omap1510_udc.h +++ /dev/null @@ -1,174 +0,0 @@ -/* - * (C) Copyright 2003 - * Gerry Hamel, geh@ti.com, Texas Instruments - * - * Based on - * linux/drivers/usb/device/bi/omap.h - * Register definitions for TI OMAP1510 USB bus interface driver - * - * Author: MontaVista Software, Inc. - * source@mvista.com - * - * 2003 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifndef __USBDCORE_OMAP1510_H__ -#define __USBDCORE_OMAP1510_H__ - - -/* - * 13.2 MPU Register Map - */ - -/* Table 13-1. USB Function Module Registers (endpoint) */ -#define UDC_BASE 0xFFFB4000 -#define UDC_OFFSET(offset) (UDC_BASE + (offset)) -#define UDC_REV UDC_OFFSET(0x0) /* Revision */ -#define UDC_EP_NUM UDC_OFFSET(0x4) /* Endpoint selection */ -#define UDC_DATA UDC_OFFSET(0x08) /* Data */ -#define UDC_CTRL UDC_OFFSET(0x0C) /* Control */ -#define UDC_STAT_FLG UDC_OFFSET(0x10) /* Status flag */ -#define UDC_RXFSTAT UDC_OFFSET(0x14) /* Receive FIFO status */ -#define UDC_SYSCON1 UDC_OFFSET(0x18) /* System configuration 1 */ -#define UDC_SYSCON2 UDC_OFFSET(0x1C) /* System configuration 2 */ -#define UDC_DEVSTAT UDC_OFFSET(0x20) /* Device status */ -#define UDC_SOF UDC_OFFSET(0x24) /* Start of frame */ -#define UDC_IRQ_EN UDC_OFFSET(0x28) /* Interrupt enable */ -#define UDC_DMA_IRQ_EN UDC_OFFSET(0x2C) /* DMA interrupt enable */ -#define UDC_IRQ_SRC UDC_OFFSET(0x30) /* Interrupt source */ -#define UDC_EPN_STAT UDC_OFFSET(0x34) /* Endpoint interrupt status */ -#define UDC_DMAN_STAT UDC_OFFSET(0x3C) /* DMA endpoint interrupt status */ - -/* IRQ_EN register fields */ -#define UDC_Sof_IE (1 << 7) /* Start-of-frame interrupt enabled */ -#define UDC_EPn_RX_IE (1 << 5) /* Receive endpoint interrupt enabled */ -#define UDC_EPn_TX_IE (1 << 4) /* Transmit endpoint interrupt enabled */ -#define UDC_DS_Chg_IE (1 << 3) /* Device state changed interrupt enabled */ -#define UDC_EP0_IE (1 << 0) /* EP0 transaction interrupt enabled */ - -/* IRQ_SRC register fields */ -#define UDC_TXn_Done (1 << 10) /* Transmit DMA channel n done */ -#define UDC_RXn_Cnt (1 << 9) /* Receive DMA channel n transactions count */ -#define UDC_RXn_EOT (1 << 8) /* Receive DMA channel n end of transfer */ -#define UDC_SOF_Flg (1 << 7) /* Start-of-frame interrupt flag */ -#define UDC_EPn_RX (1 << 5) /* Endpoint n OUT transaction */ -#define UDC_EPn_TX (1 << 4) /* Endpoint n IN transaction */ -#define UDC_DS_Chg (1 << 3) /* Device state changed */ -#define UDC_Setup (1 << 2) /* Setup transaction */ -#define UDC_EP0_RX (1 << 1) /* EP0 OUT transaction */ -#define UDC_EP0_TX (1 << 0) /* EP0 IN transaction */ - -/* DEVSTAT register fields, 14.2.9 */ -#define UDC_R_WK_OK (1 << 6) /* Remote wakeup granted */ -#define UDC_USB_Reset (1 << 5) /* USB reset signalling is active */ -#define UDC_SUS (1 << 4) /* Suspended state */ -#define UDC_CFG (1 << 3) /* Configured state */ -#define UDC_ADD (1 << 2) /* Addressed state */ -#define UDC_DEF (1 << 1) /* Default state */ -#define UDC_ATT (1 << 0) /* Attached state */ - -/* SYSCON1 register fields */ -#define UDC_Cfg_Lock (1 << 8) /* Device configuration locked */ -#define UDC_Nak_En (1 << 4) /* NAK enable */ -#define UDC_Self_Pwr (1 << 2) /* Device is self-powered */ -#define UDC_Soff_Dis (1 << 1) /* Shutoff disabled */ -#define UDC_Pullup_En (1 << 0) /* External pullup enabled */ - -/* SYSCON2 register fields */ -#define UDC_Rmt_Wkp (1 << 6) /* Remote wakeup */ -#define UDC_Stall_Cmd (1 << 5) /* Stall endpoint */ -#define UDC_Dev_Cfg (1 << 3) /* Device configured */ -#define UDC_Clr_Cfg (1 << 2) /* Clear configured */ - -/* - * Select and enable endpoints - */ - -/* Table 13-1. USB Function Module Registers (endpoint configuration) */ -#define UDC_EPBASE UDC_OFFSET(0x80) /* Endpoints base address */ -#define UDC_EP0 UDC_EPBASE /* Control endpoint configuration */ -#define UDC_EP_RX_BASE UDC_OFFSET(0x84) /* Receive endpoints base address */ -#define UDC_EP_RX(endpoint) (UDC_EP_RX_BASE + ((endpoint) - 1) * 4) -#define UDC_EP_TX_BASE UDC_OFFSET(0xC4) /* Transmit endpoints base address */ -#define UDC_EP_TX(endpoint) (UDC_EP_TX_BASE + ((endpoint) - 1) * 4) - -/* EP_NUM register fields */ -#define UDC_Setup_Sel (1 << 6) /* Setup FIFO select */ -#define UDC_EP_Sel (1 << 5) /* TX/RX FIFO select */ -#define UDC_EP_Dir (1 << 4) /* Endpoint direction */ - -/* CTRL register fields */ -#define UDC_Clr_Halt (1 << 7) /* Clear halt endpoint */ -#define UDC_Set_Halt (1 << 6) /* Set halt endpoint */ -#define UDC_Set_FIFO_En (1 << 2) /* Set FIFO enable */ -#define UDC_Clr_EP (1 << 1) /* Clear endpoint */ -#define UDC_Reset_EP (1 << 0) /* Reset endpoint */ - -/* STAT_FLG register fields */ -#define UDC_Miss_In (1 << 14) -#define UDC_Data_Flush (1 << 13) -#define UDC_ISO_Err (1 << 12) -#define UDC_ISO_FIFO_Empty (1 << 9) -#define UDC_ISO_FIFO_Full (1 << 8) -#define UDC_EP_Halted (1 << 6) -#define UDC_STALL (1 << 5) -#define UDC_NAK (1 << 4) -#define UDC_ACK (1 << 3) -#define UDC_FIFO_En (1 << 2) -#define UDC_Non_ISO_FIFO_Empty (1 << 1) -#define UDC_Non_ISO_FIFO_Full (1 << 0) - -/* EPn_RX register fields */ -#define UDC_EPn_RX_Valid (1 << 15) /* valid */ -#define UDC_EPn_RX_Db (1 << 14) /* double-buffer */ -#define UDC_EPn_RX_Iso (1 << 11) /* isochronous */ - -/* EPn_TX register fields */ -#define UDC_EPn_TX_Valid (1 << 15) /* valid */ -#define UDC_EPn_TX_Db (1 << 14) /* double-buffer */ -#define UDC_EPn_TX_Iso (1 << 11) /* isochronous */ - -#define EP0_PACKETSIZE 0x40 - -/* physical to logical endpoint mapping - * Physical endpoints are an index into device->bus->endpoint_array. - * Logical endpoints are endpoints 0 to 15 IN and OUT as defined in - * the USB specification. - * - * physical ep logical ep direction endpoint_address - * 0 0 IN and OUT 0x00 - * 1 to 15 1 to 15 OUT 0x01 to 0x0f - * 16 to 30 1 to 15 IN 0x81 to 0x8f - */ -#define PHYS_EP_TO_EP_ADDR(ep) (((ep) < 16) ? (ep) : (((ep) - 15) | 0x80)) -#define EP_ADDR_TO_PHYS_EP(a) (((a) & 0x80) ? (((a) & ~0x80) + 15) : (a)) - -/* MOD_CONF_CTRL_0 bits (FIXME: move to board hardware.h ?) */ -#define CONF_MOD_USB_W2FC_VBUS_MODE_R (1 << 17) - -/* Other registers (may be) related to USB */ - -#define CLOCK_CTRL (0xFFFE0830) -#define APLL_CTRL (0xFFFE084C) -#define DPLL_CTRL (0xFFFE083C) -#define SOFT_REQ (0xFFFE0834) -#define STATUS_REQ (0xFFFE0840) - -/* FUNC_MUX_CTRL_0 bits related to USB */ -#define UDC_VBUS_CTRL (1 << 19) -#define UDC_VBUS_MODE (1 << 18) - -/* OMAP Endpoint parameters */ -#define UDC_OUT_PACKET_SIZE 64 -#define UDC_IN_PACKET_SIZE 64 -#define UDC_INT_PACKET_SIZE 16 -#define UDC_BULK_PACKET_SIZE 16 - -#define UDC_INT_ENDPOINT 5 -#define UDC_OUT_ENDPOINT 2 -#define UDC_IN_ENDPOINT 1 - -#endif diff --git a/tools/kwbimage.c b/tools/kwbimage.c index 1120e9b..ec52f9e 100644 --- a/tools/kwbimage.c +++ b/tools/kwbimage.c @@ -12,6 +12,7 @@ */ #include "imagetool.h" +#include <limits.h> #include <image.h> #include <stdint.h> #include "kwbimage.h" @@ -396,13 +397,20 @@ static size_t image_headersz_v1(struct image_tool_params *params, ret = stat(binarye->binary.file, &s); if (ret < 0) { - char *cwd = get_current_dir_name(); + char cwd[PATH_MAX]; + char *dir = cwd; + + memset(cwd, 0, sizeof(cwd)); + if (!getcwd(cwd, sizeof(cwd))) { + dir = "current working directory"; + perror("getcwd() failed"); + } + fprintf(stderr, "Didn't find the file '%s' in '%s' which is mandatory to generate the image\n" "This file generally contains the DDR3 training code, and should be extracted from an existing bootable\n" "image for your board. See 'kwbimage -x' to extract it from an existing image.\n", - binarye->binary.file, cwd); - free(cwd); + binarye->binary.file, dir); return 0; } @@ -752,14 +760,25 @@ static void kwbimage_set_header(void *ptr, struct stat *sbuf, int ifd, } version = image_get_version(); - /* Fallback to version 0 is no version is provided in the cfg file */ - if (version == -1) - version = 0; - - if (version == 0) + switch (version) { + /* + * Fallback to version 0 if no version is provided in the + * cfg file + */ + case -1: + case 0: image = image_create_v0(&headersz, params, sbuf->st_size); - else if (version == 1) + break; + + case 1: image = image_create_v1(&headersz, params, sbuf->st_size); + break; + + default: + fprintf(stderr, "Unsupported version %d\n", version); + free(image_cfg); + exit(EXIT_FAILURE); + } if (!image) { fprintf(stderr, "Could not create image\n"); |