summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/powerpc/include/asm/immap_85xx.h4
-rw-r--r--board/freescale/p1023rds/p1023rds.c40
-rw-r--r--include/configs/P1023RDS.h2
3 files changed, 45 insertions, 1 deletions
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 50569fb..0dd57f3 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -1984,6 +1984,9 @@ typedef struct ccsr_gur {
#define MPC85xx_PMUXCR_CAN2_TDM 0x00000002
#define MPC85xx_PMUXCR_CAN2_RES 0x00000003
#endif
+#if defined(CONFIG_P1017) || defined(CONFIG_P1023)
+#define MPC85xx_PMUXCR_TSEC1_1 0x10000000
+#else
#define MPC85xx_PMUXCR_SD_DATA 0x80000000
#define MPC85xx_PMUXCR_SDHC_CD 0x40000000
#define MPC85xx_PMUXCR_SDHC_WP 0x20000000
@@ -2002,6 +2005,7 @@ typedef struct ccsr_gur {
#define MPC85xx_PMUXCR_QE10 0x00000020
#define MPC85xx_PMUXCR_QE11 0x00000010
#define MPC85xx_PMUXCR_QE12 0x00000008
+#endif
#if defined(CONFIG_P1013) || defined(CONFIG_P1022)
#define MPC85xx_PMUXCR_TDM_MASK 0x0001cc00
#define MPC85xx_PMUXCR_TDM 0x00014800
diff --git a/board/freescale/p1023rds/p1023rds.c b/board/freescale/p1023rds/p1023rds.c
index 8cfd199..546819c 100644
--- a/board/freescale/p1023rds/p1023rds.c
+++ b/board/freescale/p1023rds/p1023rds.c
@@ -38,6 +38,11 @@
#include <fdt_support.h>
#include <netdev.h>
#include <malloc.h>
+#include <fm_eth.h>
+#include <fsl_mdio.h>
+#include <miiphy.h>
+#include <phy.h>
+#include <asm/fsl_dtsec.h>
#include "bcsr.h"
@@ -143,6 +148,39 @@ unsigned long get_board_ddr_clk(ulong dummy)
int board_eth_init(bd_t *bis)
{
+ u8 *bcsr = (u8 *)BCSR_ACCESS_REG_ADDR;
+ ccsr_gur_t *gur = (ccsr_gur_t *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+ struct fsl_pq_mdio_info dtsec_mdio_info;
+
+ /*
+ * Need to set dTSEC 1 pin multiplexing to TSEC. The default setting
+ * is not correct.
+ */
+ setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_TSEC1_1);
+
+ dtsec_mdio_info.regs =
+ (struct tsec_mii_mng *)CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR;
+ dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME;
+
+ /* Register the 1G MDIO bus */
+ fsl_pq_mdio_init(bis, &dtsec_mdio_info);
+
+ fm_info_set_phy_address(FM1_DTSEC1, CONFIG_SYS_FM1_DTSEC1_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC2, CONFIG_SYS_FM1_DTSEC2_PHY_ADDR);
+
+ fm_info_set_mdio(FM1_DTSEC1,
+ miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME));
+ fm_info_set_mdio(FM1_DTSEC2,
+ miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME));
+
+ /* Make SERDES connected to SGMII by cleaing bcsr19[7] */
+ if (fm_info_get_enet_if(FM1_DTSEC1) == PHY_INTERFACE_MODE_SGMII)
+ clrbits_8(&bcsr[19], BCSR19_SGMII_SEL_L);
+
+#ifdef CONFIG_FMAN_ENET
+ cpu_eth_init(bis);
+#endif
+
return pci_eth_init(bis);
}
@@ -158,5 +196,7 @@ void ft_board_setup(void *blob, bd_t *bd)
size = getenv_bootm_size();
fdt_fixup_memory(blob, (u64)base, (u64)size);
+
+ fdt_fixup_fman_ethernet(blob);
}
#endif
diff --git a/include/configs/P1023RDS.h b/include/configs/P1023RDS.h
index 24042df..9386674 100644
--- a/include/configs/P1023RDS.h
+++ b/include/configs/P1023RDS.h
@@ -525,9 +525,9 @@ extern unsigned long get_clock_freq(void);
#ifdef CONFIG_SYS_DPAA_FMAN
#define CONFIG_FMAN_ENET
+#define CONFIG_PHY_MARVELL
#endif
-#define CONFIG_SYS_FMAN_FW
#ifndef CONFIG_NAND
/* Default address of microcode for the Linux Fman driver */
/* QE microcode/firmware address */