summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--doc/SPI/README.dual-flash65
-rw-r--r--drivers/mtd/spi/sf.c3
-rw-r--r--drivers/mtd/spi/sf_ops.c57
-rw-r--r--drivers/mtd/spi/sf_probe.c8
-rw-r--r--include/spi.h8
-rw-r--r--include/spi_flash.h8
6 files changed, 138 insertions, 11 deletions
diff --git a/doc/SPI/README.dual-flash b/doc/SPI/README.dual-flash
new file mode 100644
index 0000000..ba0aa26
--- /dev/null
+++ b/doc/SPI/README.dual-flash
@@ -0,0 +1,65 @@
+SPI/QSPI Dual flash connection modes:
+=====================================
+
+This describes how SPI/QSPI flash memories are connected to a given
+controller in a single chip select line.
+
+Current spi_flash framework supports, single flash memory connected
+to a given controller with single chip select line, but there are some
+hw logics(ex: xilinx zynq qspi) that describes two/dual memories are
+connected with a single chip select line from a controller.
+
+"dual_flash" from include/spi.h describes these types of connection mode
+
+Possible connections:
+--------------------
+SF_SINGLE_FLASH:
+ - single spi flash memory connected with single chip select line.
+
+ +------------+ CS +---------------+
+ | |----------------------->| |
+ | Controller | I0[3:0] | Flash memory |
+ | SPI/QSPI |<======================>| (SPI/QSPI) |
+ | | CLK | |
+ | |----------------------->| |
+ +------------+ +---------------+
+
+SF_DUAL_STACKED_FLASH:
+ - dual spi/qspi flash memories are connected with a single chipselect
+ line and these two memories are operating stacked fasion with shared buses.
+ - xilinx zynq qspi controller has implemented this feature [1]
+
+ +------------+ CS +---------------+
+ | |---------------------->| |
+ | | I0[3:0] | Upper Flash |
+ | | +=========>| memory |
+ | | | CLK | (SPI/QSPI) |
+ | | | +---->| |
+ | Controller | CS | | +---------------+
+ | SPI/QSPI |------------|----|---->| |
+ | | I0[3:0] | | | Lower Flash |
+ | |<===========+====|====>| memory |
+ | | CLK | | (SPI/QSPI) |
+ | |-----------------+---->| |
+ +------------+ +---------------+
+
+ - two memory flash devices should has same hw part attributes (like size,
+ vendor..etc)
+ - Configurations:
+ on LQSPI_CFG register, Enable TWO_MEM[BIT:30] on LQSPI_CFG
+ Enable U_PAGE[BIT:28] if U_PAGE flag set - upper memory
+ Disable U_PAGE[BIT:28] if U_PAGE flag unset - lower memory
+ - Operation:
+ accessing memories serially like one after another.
+ by default, if U_PAGE is unset lower memory should accessible,
+ once user wants to access upper memory need to set U_PAGE.
+
+Note: Technically there is only one CS line from the controller, but
+zynq qspi controller has an internal hw logic to enable additional CS
+when controller is configured for dual memories.
+
+[1] http://www.xilinx.com/support/documentation/user_guides/ug585-Zynq-7000-TRM.pdf
+
+--
+Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
+05-01-2014.
diff --git a/drivers/mtd/spi/sf.c b/drivers/mtd/spi/sf.c
index d5e175c..c780a81 100644
--- a/drivers/mtd/spi/sf.c
+++ b/drivers/mtd/spi/sf.c
@@ -18,6 +18,9 @@ static int spi_flash_read_write(struct spi_slave *spi,
unsigned long flags = SPI_XFER_BEGIN;
int ret;
+ if (spi->flags & SPI_XFER_U_PAGE)
+ flags |= SPI_XFER_U_PAGE;
+
if (data_len == 0)
flags |= SPI_XFER_END;
diff --git a/drivers/mtd/spi/sf_ops.c b/drivers/mtd/spi/sf_ops.c
index 7ae9582..e877858 100644
--- a/drivers/mtd/spi/sf_ops.c
+++ b/drivers/mtd/spi/sf_ops.c
@@ -131,10 +131,28 @@ static int spi_flash_bank(struct spi_flash *flash, u32 offset)
}
#endif
+static void spi_flash_dual_flash(struct spi_flash *flash, u32 *addr)
+{
+ switch (flash->dual_flash) {
+ case SF_DUAL_STACKED_FLASH:
+ if (*addr >= (flash->size >> 1)) {
+ *addr -= flash->size >> 1;
+ flash->spi->flags |= SPI_XFER_U_PAGE;
+ } else {
+ flash->spi->flags &= ~SPI_XFER_U_PAGE;
+ }
+ break;
+ default:
+ debug("SF: Unsupported dual_flash=%d\n", flash->dual_flash);
+ break;
+ }
+}
+
int spi_flash_cmd_wait_ready(struct spi_flash *flash, unsigned long timeout)
{
struct spi_slave *spi = flash->spi;
unsigned long timebase;
+ unsigned long flags = SPI_XFER_BEGIN;
int ret;
u8 status;
u8 check_status = 0x0;
@@ -146,7 +164,10 @@ int spi_flash_cmd_wait_ready(struct spi_flash *flash, unsigned long timeout)
check_status = poll_bit;
}
- ret = spi_xfer(spi, 8, &cmd, NULL, SPI_XFER_BEGIN);
+ if (spi->flags & SPI_XFER_U_PAGE)
+ flags |= SPI_XFER_U_PAGE;
+
+ ret = spi_xfer(spi, 8, &cmd, NULL, flags);
if (ret) {
debug("SF: fail to read %s status register\n",
cmd == CMD_READ_STATUS ? "read" : "flag");
@@ -219,7 +240,7 @@ int spi_flash_write_common(struct spi_flash *flash, const u8 *cmd,
int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len)
{
- u32 erase_size;
+ u32 erase_size, erase_addr;
u8 cmd[SPI_FLASH_CMD_LEN];
int ret = -1;
@@ -231,15 +252,20 @@ int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len)
cmd[0] = flash->erase_cmd;
while (len) {
+ erase_addr = offset;
+
+ if (flash->dual_flash > SF_SINGLE_FLASH)
+ spi_flash_dual_flash(flash, &erase_addr);
+
#ifdef CONFIG_SPI_FLASH_BAR
- ret = spi_flash_bank(flash, offset);
+ ret = spi_flash_bank(flash, erase_addr);
if (ret < 0)
return ret;
#endif
- spi_flash_addr(offset, cmd);
+ spi_flash_addr(erase_addr, cmd);
debug("SF: erase %2x %2x %2x %2x (%x)\n", cmd[0], cmd[1],
- cmd[2], cmd[3], offset);
+ cmd[2], cmd[3], erase_addr);
ret = spi_flash_write_common(flash, cmd, sizeof(cmd), NULL, 0);
if (ret < 0) {
@@ -258,6 +284,7 @@ int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset,
size_t len, const void *buf)
{
unsigned long byte_addr, page_size;
+ u32 write_addr;
size_t chunk_len, actual;
u8 cmd[SPI_FLASH_CMD_LEN];
int ret = -1;
@@ -266,8 +293,13 @@ int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset,
cmd[0] = flash->write_cmd;
for (actual = 0; actual < len; actual += chunk_len) {
+ write_addr = offset;
+
+ if (flash->dual_flash > SF_SINGLE_FLASH)
+ spi_flash_dual_flash(flash, &write_addr);
+
#ifdef CONFIG_SPI_FLASH_BAR
- ret = spi_flash_bank(flash, offset);
+ ret = spi_flash_bank(flash, write_addr);
if (ret < 0)
return ret;
#endif
@@ -277,7 +309,7 @@ int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset,
if (flash->spi->max_write_size)
chunk_len = min(chunk_len, flash->spi->max_write_size);
- spi_flash_addr(offset, cmd);
+ spi_flash_addr(write_addr, cmd);
debug("SF: 0x%p => cmd = { 0x%02x 0x%02x%02x%02x } chunk_len = %zu\n",
buf + actual, cmd[0], cmd[1], cmd[2], cmd[3], chunk_len);
@@ -322,7 +354,7 @@ int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset,
size_t len, void *data)
{
u8 *cmd, cmdsz;
- u32 remain_len, read_len;
+ u32 remain_len, read_len, read_addr;
int bank_sel = 0;
int ret = -1;
@@ -346,8 +378,13 @@ int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset,
cmd[0] = flash->read_cmd;
while (len) {
+ read_addr = offset;
+
+ if (flash->dual_flash > SF_SINGLE_FLASH)
+ spi_flash_dual_flash(flash, &read_addr);
+
#ifdef CONFIG_SPI_FLASH_BAR
- bank_sel = spi_flash_bank(flash, offset);
+ bank_sel = spi_flash_bank(flash, read_addr);
if (bank_sel < 0)
return ret;
#endif
@@ -357,7 +394,7 @@ int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset,
else
read_len = remain_len;
- spi_flash_addr(offset, cmd);
+ spi_flash_addr(read_addr, cmd);
ret = spi_flash_read_common(flash, cmd, cmdsz, data, read_len);
if (ret < 0) {
diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c
index ac42b60..b9e14c5 100644
--- a/drivers/mtd/spi/sf_probe.c
+++ b/drivers/mtd/spi/sf_probe.c
@@ -134,6 +134,7 @@ static struct spi_flash *spi_flash_validate_params(struct spi_slave *spi,
flash->spi = spi;
flash->name = params->name;
flash->memory_map = spi->memory_map;
+ flash->dual_flash = flash->spi->option;
/* Assign spi_flash ops */
flash->write = spi_flash_cmd_write_ops;
@@ -148,6 +149,8 @@ static struct spi_flash *spi_flash_validate_params(struct spi_slave *spi,
flash->page_size = (ext_jedec == 0x4d00) ? 512 : 256;
flash->sector_size = params->sector_size;
flash->size = flash->sector_size * params->nr_sectors;
+ if (flash->dual_flash & SF_DUAL_STACKED_FLASH)
+ flash->size <<= 1;
/* Compute erase sector and command */
if (params->flags & SECT_4K) {
@@ -324,7 +327,10 @@ static struct spi_flash *spi_flash_probe_slave(struct spi_slave *spi)
puts("\n");
#endif
#ifndef CONFIG_SPI_FLASH_BAR
- if (flash->size > SPI_FLASH_16MB_BOUN) {
+ if (((flash->dual_flash == SF_SINGLE_FLASH) &&
+ (flash->size > SPI_FLASH_16MB_BOUN)) ||
+ ((flash->dual_flash > SF_SINGLE_FLASH) &&
+ (flash->size > SPI_FLASH_16MB_BOUN << 1))) {
puts("SF: Warning - Only lower 16MiB accessible,");
puts(" Full access #define CONFIG_SPI_FLASH_BAR\n");
}
diff --git a/include/spi.h b/include/spi.h
index c8a9d87..d214d82 100644
--- a/include/spi.h
+++ b/include/spi.h
@@ -30,6 +30,7 @@
#define SPI_XFER_MMAP 0x08 /* Memory Mapped start */
#define SPI_XFER_MMAP_END 0x10 /* Memory Mapped End */
#define SPI_XFER_ONCE (SPI_XFER_BEGIN | SPI_XFER_END)
+#define SPI_XFER_U_PAGE (1 << 5)
/* SPI TX operation modes */
#define SPI_OPM_TX_QPP 1 << 0
@@ -44,6 +45,9 @@
SPI_OPM_RX_DIO | SPI_OPM_RX_QOF | \
SPI_OPM_RX_QIOF
+/* SPI bus connection options */
+#define SPI_CONN_DUAL_SHARED 1 << 0
+
/* Header byte that marks the start of the message */
#define SPI_PREAMBLE_END_BYTE 0xec
@@ -62,6 +66,8 @@
* @max_write_size: If non-zero, the maximum number of bytes which can
* be written at once, excluding command bytes.
* @memory_map: Address of read-only SPI flash access.
+ * @option: Varies SPI bus options - separate bus.
+ * @flags: Indication of SPI flags.
*/
struct spi_slave {
unsigned int bus;
@@ -71,6 +77,8 @@ struct spi_slave {
unsigned int wordlen;
unsigned int max_write_size;
void *memory_map;
+ u8 option;
+ u8 flags;
};
/**
diff --git a/include/spi_flash.h b/include/spi_flash.h
index 213d659..36f1f03 100644
--- a/include/spi_flash.h
+++ b/include/spi_flash.h
@@ -36,6 +36,12 @@ enum spi_read_cmds {
#define RD_EXTN ARRAY_SLOW | DUAL_OUTPUT_FAST | DUAL_IO_FAST
#define RD_FULL RD_EXTN | QUAD_OUTPUT_FAST | QUAD_IO_FAST
+/* Dual SPI flash memories */
+enum spi_dual_flash {
+ SF_SINGLE_FLASH = 0,
+ SF_DUAL_STACKED_FLASH = 1 << 0,
+};
+
/**
* struct spi_flash_params - SPI/QSPI flash device params structure
*
@@ -64,6 +70,7 @@ extern const struct spi_flash_params spi_flash_params_table[];
*
* @spi: SPI slave
* @name: Name of SPI flash
+ * @dual_flash: Indicates dual flash memories - dual stacked
* @size: Total flash size
* @page_size: Write (page) size
* @sector_size: Sector size
@@ -88,6 +95,7 @@ extern const struct spi_flash_params spi_flash_params_table[];
struct spi_flash {
struct spi_slave *spi;
const char *name;
+ u8 dual_flash;
u32 size;
u32 page_size;