summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Makefile4
-rw-r--r--board/freescale/m54455evb/config.mk4
-rw-r--r--board/m5282evb/m5282evb.c1
-rw-r--r--cpu/mcf52x2/start.S6
-rw-r--r--cpu/mcf532x/start.S4
-rwxr-xr-xdrivers/Makefile2
-rw-r--r--drivers/serial/Makefile2
-rw-r--r--drivers/serial/serial_pl010.c (renamed from drivers/serial_pl010.c)0
-rw-r--r--drivers/serial/serial_pl011.c (renamed from drivers/serial_pl011.c)0
-rw-r--r--drivers/serial/serial_pl011.h (renamed from drivers/serial_pl011.h)0
-rw-r--r--include/configs/M5253EVBE.h2
-rw-r--r--include/configs/M5282EVB.h2
-rw-r--r--include/configs/M5329EVB.h2
-rw-r--r--include/configs/M54455EVB.h36
-rw-r--r--include/configs/atstk1002.h11
-rw-r--r--lib_m68k/m68k_linux.c3
-rw-r--r--net/bootp.c11
17 files changed, 53 insertions, 37 deletions
diff --git a/Makefile b/Makefile
index 5643aa9..c0821d8 100644
--- a/Makefile
+++ b/Makefile
@@ -1733,9 +1733,13 @@ M54455EVB_i66_config : unconfig
>include/config.h ; \
if [ "$${FLASH}" == "INTEL" ] ; then \
echo "#undef CFG_ATMEL_BOOT" >> $(obj)include/config.h ; \
+ echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
+ cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \
echo "... with INTEL boot..." ; \
else \
echo "#define CFG_ATMEL_BOOT" >> $(obj)include/config.h ; \
+ echo "TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
+ cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \
echo "... with ATMEL boot..." ; \
fi; \
echo "#define CFG_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \
diff --git a/board/freescale/m54455evb/config.mk b/board/freescale/m54455evb/config.mk
index ce014ed..b42fcc9 100644
--- a/board/freescale/m54455evb/config.mk
+++ b/board/freescale/m54455evb/config.mk
@@ -22,4 +22,6 @@
# MA 02111-1307 USA
#
-TEXT_BASE = 0
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
diff --git a/board/m5282evb/m5282evb.c b/board/m5282evb/m5282evb.c
index 243d6a4..7d6d1d6 100644
--- a/board/m5282evb/m5282evb.c
+++ b/board/m5282evb/m5282evb.c
@@ -89,4 +89,5 @@ long int initdram (int board_type)
/* Write to the SDRAM Mode Register */
*(u32 *)(CFG_SDRAM_BASE + 0x400) = 0xA5A59696;
}
+ return dramsize;
}
diff --git a/cpu/mcf52x2/start.S b/cpu/mcf52x2/start.S
index 686e2a5..260a09a 100644
--- a/cpu/mcf52x2/start.S
+++ b/cpu/mcf52x2/start.S
@@ -58,7 +58,7 @@ _vectors:
.long 0x00000000 /* Flash offset is 0 until we setup CS0 */
#if defined(CONFIG_R5200)
.long 0x400
-#elif defined(CONFIG_M5282)
+#elif defined(CONFIG_M5282) && (TEXT_BASE == CFG_INT_FLASH_BASE)
.long _start - TEXT_BASE
#else
.long _START
@@ -177,7 +177,11 @@ _after_flashbar_copy:
* therefore no VBR to set
*/
#if !defined(CONFIG_MONITOR_IS_IN_RAM)
+#if defined(CONFIG_M5282) && (TEXT_BASE == CFG_INT_FLASH_BASE)
+ move.l #CFG_INT_FLASH_BASE, %d0
+#else
move.l #CFG_FLASH_BASE, %d0
+#endif
movec %d0, %VBR
#endif
diff --git a/cpu/mcf532x/start.S b/cpu/mcf532x/start.S
index 5cc1c87..61be2ea 100644
--- a/cpu/mcf532x/start.S
+++ b/cpu/mcf532x/start.S
@@ -131,7 +131,7 @@ _start:
movec %d0, %VBR
move.l #(CFG_INIT_RAM_ADDR + CFG_INIT_RAM_CTRL), %d0
- movec %d0, %RAMBAR0
+ movec %d0, %RAMBAR1
/* invalidate and disable cache */
move.l #0x01000000, %d0 /* Invalidate cache cmd */
@@ -268,7 +268,7 @@ _int_handler:
icache_enable:
move.l #0x01000000, %d0 /* Invalidate cache cmd */
movec %d0, %CACR /* Invalidate cache */
- move.l #(CFG_SDRAM_BASE + 0xc000 + ((CFG_SDRAM_SIZE & 0x1fe0) << 11)), %d0
+ move.l #(CFG_SDRAM_BASE + 0x1c000), %d0
movec %d0, %ACR0 /* Enable cache */
move.l #0x80000200, %d0 /* Setup cache mask */
diff --git a/drivers/Makefile b/drivers/Makefile
index 00978d8..d19588f 100755
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -45,7 +45,7 @@ COBJS = 3c589.o 5701rls.o ali512x.o at45.o ata_piix.o \
s3c4510b_eth.o s3c4510b_uart.o \
sed13806.o sed156x.o \
serial.o serial_max3100.o \
- serial_pl010.o serial_pl011.o serial_xuartlite.o \
+ serial_xuartlite.o \
sil680.o sl811_usb.o sm501.o smc91111.o smiLynxEM.o \
status_led.o sym53c8xx.o systemace.o ahci.o \
ti_pci1410a.o tigon3.o tqm8xx_pcmcia.o tsec.o \
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 93c68dd..40f3d67 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
LIB := $(obj)libserial.a
-COBJS := mcfuart.o
+COBJS := mcfuart.o serial_pl010.o serial_pl011.o
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/drivers/serial_pl010.c b/drivers/serial/serial_pl010.c
index 417b6ae..417b6ae 100644
--- a/drivers/serial_pl010.c
+++ b/drivers/serial/serial_pl010.c
diff --git a/drivers/serial_pl011.c b/drivers/serial/serial_pl011.c
index 4d35fe5..4d35fe5 100644
--- a/drivers/serial_pl011.c
+++ b/drivers/serial/serial_pl011.c
diff --git a/drivers/serial_pl011.h b/drivers/serial/serial_pl011.h
index 5f20fdd..5f20fdd 100644
--- a/drivers/serial_pl011.h
+++ b/drivers/serial/serial_pl011.h
diff --git a/include/configs/M5253EVBE.h b/include/configs/M5253EVBE.h
index 48170e7..f5e1b64 100644
--- a/include/configs/M5253EVBE.h
+++ b/include/configs/M5253EVBE.h
@@ -146,7 +146,7 @@
* Please note that CFG_SDRAM_BASE _must_ start at 0
*/
#define CFG_SDRAM_BASE 0x00000000
-#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */
+#define CFG_SDRAM_SIZE 8 /* SDRAM size in MB */
#ifdef CONFIG_MONITOR_IS_IN_RAM
#define CFG_MONITOR_BASE 0x20000
diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h
index 3c17c1e..7bb9f60 100644
--- a/include/configs/M5282EVB.h
+++ b/include/configs/M5282EVB.h
@@ -163,7 +163,7 @@
* Please note that CFG_SDRAM_BASE _must_ start at 0
*/
#define CFG_SDRAM_BASE 0x00000000
-#define CFG_SDRAM_SIZE 8 /* SDRAM size in MB */
+#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */
#define CFG_FLASH_BASE 0xffe00000
#define CFG_INT_FLASH_BASE 0xf0000000
#define CFG_INT_FLASH_ENABLE 0x21
diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h
index d3b1605..47d74a3 100644
--- a/include/configs/M5329EVB.h
+++ b/include/configs/M5329EVB.h
@@ -175,7 +175,7 @@
* Please note that CFG_SDRAM_BASE _must_ start at 0
*/
#define CFG_SDRAM_BASE 0x40000000
-#define CFG_SDRAM_SIZE 16 /* SDRAM size in MB */
+#define CFG_SDRAM_SIZE 32 /* SDRAM size in MB */
#define CFG_SDRAM_CFG1 0x53722730
#define CFG_SDRAM_CFG2 0x56670000
#define CFG_SDRAM_CTRL 0xE1092000
diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h
index 6f4859c..ba050cb 100644
--- a/include/configs/M54455EVB.h
+++ b/include/configs/M54455EVB.h
@@ -27,8 +27,8 @@
* board/config.h - configuration options, board specific
*/
-#ifndef _JAMICA54455_H
-#define _JAMICA54455_H
+#ifndef _M54455EVB_H
+#define _M54455EVB_H
/*
* High Level Configuration Options
@@ -75,7 +75,7 @@
#define CONFIG_CMD_MISC
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
-#define CONFIG_CMD_PCI
+#undef CONFIG_CMD_PCI
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
@@ -129,8 +129,8 @@
"u-boot=u-boot.bin\0" \
"load=tftp ${loadaddr) ${u-boot}\0" \
"upd=run load; run prog\0" \
- "prog=prot off 0 2ffff;" \
- "era 0 2ffff;" \
+ "prog=prot off 4000000 402ffff;" \
+ "era 4000000 402ffff;" \
"cp.b ${loadaddr} 0 ${filesize};" \
"save\0" \
""
@@ -174,6 +174,7 @@
#define CFG_IMMR CFG_MBAR
/* PCI */
+#ifdef CONFIG_CMD_PCI
#define CONFIG_PCI 1
#define CFG_PCI_MEM_BUS 0xA0000000
@@ -187,6 +188,7 @@
#define CFG_PCI_CFG_BUS 0xB0000000
#define CFG_PCI_CFG_PHYS CFG_PCI_CFG_BUS
#define CFG_PCI_CFG_SIZE 0x01000000
+#endif
/* FPGA - Spartan 2 */
/* experiment
@@ -268,8 +270,6 @@
/* Configuration for environment
* Environment is embedded in u-boot in the second sector of the flash
*/
-#define CFG_ENV_OFFSET 0x4000
-#define CFG_ENV_SECT_SIZE 0x2000
#define CFG_ENV_IS_IN_FLASH 1
#define CONFIG_ENV_OVERWRITE 1
#undef CFG_ENV_IS_EMBEDDED
@@ -278,13 +278,17 @@
* FLASH organization
*/
#ifdef CFG_ATMEL_BOOT
-# define CFG_FLASH_BASE 0
+# define CFG_FLASH_BASE CFG_CS0_BASE
# define CFG_FLASH0_BASE CFG_CS0_BASE
# define CFG_FLASH1_BASE CFG_CS1_BASE
+# define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x4000)
+# define CFG_ENV_SECT_SIZE 0x2000
#else
# define CFG_FLASH_BASE CFG_FLASH0_BASE
# define CFG_FLASH0_BASE CFG_CS1_BASE
# define CFG_FLASH1_BASE CFG_CS0_BASE
+# define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x60000)
+# define CFG_ENV_SECT_SIZE 0x20000
#endif
/* M54455EVB has one non CFI flash, defined CFG_FLASH_CFI will cause the system
@@ -328,9 +332,9 @@
* NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
*/
#ifdef CFG_ATMEL_BOOT
-# define CONFIG_JFFS2_DEV "nor0"
+# define CONFIG_JFFS2_DEV "nor1"
# define CONFIG_JFFS2_PART_SIZE 0x01000000
-# define CONFIG_JFFS2_PART_OFFSET CFG_FLASH1_BASE
+# define CONFIG_JFFS2_PART_OFFSET (CFG_FLASH1_BASE + 0x500000)
#else
# define CONFIG_JFFS2_DEV "nor0"
# define CONFIG_JFFS2_PART_SIZE (0x01000000 - 0x500000)
@@ -356,20 +360,20 @@
#ifdef CFG_ATMEL_BOOT
/* Atmel Flash */
-#define CFG_CS0_BASE 0
+#define CFG_CS0_BASE 0x04000000
#define CFG_CS0_MASK 0x00070001
#define CFG_CS0_CTRL 0x00001140
/* Intel Flash */
-#define CFG_CS1_BASE 0x04000000
+#define CFG_CS1_BASE 0x00000000
#define CFG_CS1_MASK 0x01FF0001
-#define CFG_CS1_CTRL 0x003F3D60
+#define CFG_CS1_CTRL 0x00000D60
#define CFG_ATMEL_BASE CFG_CS0_BASE
#else
/* Intel Flash */
-#define CFG_CS0_BASE 0
+#define CFG_CS0_BASE 0x00000000
#define CFG_CS0_MASK 0x01FF0001
-#define CFG_CS0_CTRL 0x003F3D60
+#define CFG_CS0_CTRL 0x00000D60
/* Atmel Flash */
#define CFG_CS1_BASE 0x04000000
#define CFG_CS1_MASK 0x00070001
@@ -388,4 +392,4 @@
#define CFG_CS3_MASK 0x00070001
#define CFG_CS3_CTRL 0x00000020
-#endif /* _JAMICA54455_H */
+#endif /* _M54455EVB_H */
diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h
index 1809fc5..b33e26f 100644
--- a/include/configs/atstk1002.h
+++ b/include/configs/atstk1002.h
@@ -114,15 +114,10 @@
#define CONFIG_AUTOBOOT_STOP_STR " "
/*
- * These are "locally administered ethernet addresses" generated by
- * ./tools/gen_eth_addr
- *
- * After booting the board for the first time, new addresses should be
- * generated and assigned to the environment variables "ethaddr" and
- * "eth1addr".
+ * After booting the board for the first time, new ethernet addresses
+ * should be generated and assigned to the environment variables
+ * "ethaddr" and "eth1addr". This is normally done during production.
*/
-#define CONFIG_ETHADDR 6a:87:71:14:cd:cb
-#define CONFIG_ETH1ADDR ca:f8:15:e6:3e:e6
#define CONFIG_OVERWRITE_ETHADDR_ONCE 1
#define CONFIG_NET_MULTI 1
diff --git a/lib_m68k/m68k_linux.c b/lib_m68k/m68k_linux.c
index bea9744..cc974c2 100644
--- a/lib_m68k/m68k_linux.c
+++ b/lib_m68k/m68k_linux.c
@@ -26,6 +26,7 @@
#include <image.h>
#include <zlib.h>
#include <bzlib.h>
+#include <watchdog.h>
#include <environment.h>
#include <asm/byteorder.h>
@@ -36,6 +37,8 @@ DECLARE_GLOBAL_DATA_PTR;
#define LINUX_MAX_ENVS 256
#define LINUX_MAX_ARGS 256
+#define CHUNKSZ (64 * 1024)
+
#ifdef CONFIG_SHOW_BOOT_PROGRESS
# include <status_led.h>
# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg)
diff --git a/net/bootp.c b/net/bootp.c
index 749d3e5..cfe6f8d 100644
--- a/net/bootp.c
+++ b/net/bootp.c
@@ -850,9 +850,9 @@ static void DhcpSendRequestPkt(Bootp_t *bp_offer)
bp->bp_hlen = HWL_ETHER;
bp->bp_hops = 0;
bp->bp_secs = htons(get_timer(0) / CFG_HZ);
- NetCopyIP(&bp->bp_ciaddr, &bp_offer->bp_ciaddr); /* both in network byte order */
- NetCopyIP(&bp->bp_yiaddr, &bp_offer->bp_yiaddr);
- NetCopyIP(&bp->bp_siaddr, &bp_offer->bp_siaddr);
+ /* Do not set the client IP, your IP, or server IP yet, since it hasn't been ACK'ed by
+ * the server yet */
+
/*
* RFC3046 requires Relay Agents to discard packets with
* nonzero and offered giaddr
@@ -870,7 +870,9 @@ static void DhcpSendRequestPkt(Bootp_t *bp_offer)
/*
* Copy options from OFFER packet if present
*/
- NetCopyIP(&OfferedIP, &bp->bp_yiaddr);
+
+ /* Copy offered IP into the parameters request list */
+ NetCopyIP(&OfferedIP, &bp_offer->bp_yiaddr);
extlen = DhcpExtended((u8 *)bp->bp_vend, DHCP_REQUEST, NetDHCPServerIP, OfferedIP);
pktlen = BOOTP_SIZE - sizeof(bp->bp_vend) + extlen;
@@ -980,3 +982,4 @@ void DhcpRequest(void)
#endif
#endif
+