summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/spi/Makefile1
-rw-r--r--drivers/spi/mxs_spi.c186
2 files changed, 187 insertions, 0 deletions
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 84ad6fa..6f389f0 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -37,6 +37,7 @@ COBJS-$(CONFIG_KIRKWOOD_SPI) += kirkwood_spi.o
COBJS-$(CONFIG_MPC52XX_SPI) += mpc52xx_spi.o
COBJS-$(CONFIG_MPC8XXX_SPI) += mpc8xxx_spi.o
COBJS-$(CONFIG_MXC_SPI) += mxc_spi.o
+COBJS-$(CONFIG_MXS_SPI) += mxs_spi.o
COBJS-$(CONFIG_OC_TINY_SPI) += oc_tiny_spi.o
COBJS-$(CONFIG_OMAP3_SPI) += omap3_spi.o
COBJS-$(CONFIG_SOFT_SPI) += soft_spi.o
diff --git a/drivers/spi/mxs_spi.c b/drivers/spi/mxs_spi.c
new file mode 100644
index 0000000..4c27fef
--- /dev/null
+++ b/drivers/spi/mxs_spi.c
@@ -0,0 +1,186 @@
+/*
+ * Freescale i.MX28 SPI driver
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * NOTE: This driver only supports the SPI-controller chipselects,
+ * GPIO driven chipselects are not supported.
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <spi.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/sys_proto.h>
+
+#define MXS_SPI_MAX_TIMEOUT 1000000
+#define MXS_SPI_PORT_OFFSET 0x2000
+
+struct mxs_spi_slave {
+ struct spi_slave slave;
+ uint32_t max_khz;
+ uint32_t mode;
+ struct mx28_ssp_regs *regs;
+};
+
+static inline struct mxs_spi_slave *to_mxs_slave(struct spi_slave *slave)
+{
+ return container_of(slave, struct mxs_spi_slave, slave);
+}
+
+void spi_init(void)
+{
+}
+
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode)
+{
+ struct mxs_spi_slave *mxs_slave;
+ uint32_t addr;
+
+ if (bus > 3) {
+ printf("MXS SPI: Max bus number is 3\n");
+ return NULL;
+ }
+
+ mxs_slave = malloc(sizeof(struct mxs_spi_slave));
+ if (!mxs_slave)
+ return NULL;
+
+ addr = MXS_SSP0_BASE + (bus * MXS_SPI_PORT_OFFSET);
+
+ mxs_slave->slave.bus = bus;
+ mxs_slave->slave.cs = cs;
+ mxs_slave->max_khz = max_hz / 1000;
+ mxs_slave->mode = mode;
+ mxs_slave->regs = (struct mx28_ssp_regs *)addr;
+
+ return &mxs_slave->slave;
+}
+
+void spi_free_slave(struct spi_slave *slave)
+{
+ struct mxs_spi_slave *mxs_slave = to_mxs_slave(slave);
+ free(mxs_slave);
+}
+
+int spi_claim_bus(struct spi_slave *slave)
+{
+ struct mxs_spi_slave *mxs_slave = to_mxs_slave(slave);
+ struct mx28_ssp_regs *ssp_regs = mxs_slave->regs;
+ uint32_t reg = 0;
+
+ mx28_reset_block(&ssp_regs->hw_ssp_ctrl0_reg);
+
+ writel(SSP_CTRL0_BUS_WIDTH_ONE_BIT, &ssp_regs->hw_ssp_ctrl0);
+
+ reg = SSP_CTRL1_SSP_MODE_SPI | SSP_CTRL1_WORD_LENGTH_EIGHT_BITS;
+ reg |= (mxs_slave->mode & SPI_CPOL) ? SSP_CTRL1_POLARITY : 0;
+ reg |= (mxs_slave->mode & SPI_CPHA) ? SSP_CTRL1_PHASE : 0;
+ writel(reg, &ssp_regs->hw_ssp_ctrl1);
+
+ writel(0, &ssp_regs->hw_ssp_cmd0);
+
+ mx28_set_ssp_busclock(slave->bus, mxs_slave->max_khz);
+
+ return 0;
+}
+
+void spi_release_bus(struct spi_slave *slave)
+{
+}
+
+static void mxs_spi_start_xfer(struct mx28_ssp_regs *ssp_regs)
+{
+ writel(SSP_CTRL0_LOCK_CS, &ssp_regs->hw_ssp_ctrl0_set);
+ writel(SSP_CTRL0_IGNORE_CRC, &ssp_regs->hw_ssp_ctrl0_clr);
+}
+
+static void mxs_spi_end_xfer(struct mx28_ssp_regs *ssp_regs)
+{
+ writel(SSP_CTRL0_LOCK_CS, &ssp_regs->hw_ssp_ctrl0_clr);
+ writel(SSP_CTRL0_IGNORE_CRC, &ssp_regs->hw_ssp_ctrl0_set);
+}
+
+int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
+ const void *dout, void *din, unsigned long flags)
+{
+ struct mxs_spi_slave *mxs_slave = to_mxs_slave(slave);
+ struct mx28_ssp_regs *ssp_regs = mxs_slave->regs;
+ int len = bitlen / 8;
+ const char *tx = dout;
+ char *rx = din;
+
+ if (bitlen == 0)
+ return 0;
+
+ if (!rx && !tx)
+ return 0;
+
+ if (flags & SPI_XFER_BEGIN)
+ mxs_spi_start_xfer(ssp_regs);
+
+ while (len--) {
+ /* We transfer 1 byte */
+ writel(1, &ssp_regs->hw_ssp_xfer_size);
+
+ if ((flags & SPI_XFER_END) && !len)
+ mxs_spi_end_xfer(ssp_regs);
+
+ if (tx)
+ writel(SSP_CTRL0_READ, &ssp_regs->hw_ssp_ctrl0_clr);
+ else
+ writel(SSP_CTRL0_READ, &ssp_regs->hw_ssp_ctrl0_set);
+
+ writel(SSP_CTRL0_RUN, &ssp_regs->hw_ssp_ctrl0_set);
+
+ if (mx28_wait_mask_set(&ssp_regs->hw_ssp_ctrl0_reg,
+ SSP_CTRL0_RUN, MXS_SPI_MAX_TIMEOUT)) {
+ printf("MXS SPI: Timeout waiting for start\n");
+ return -1;
+ }
+
+ if (tx)
+ writel(*tx++, &ssp_regs->hw_ssp_data);
+
+ writel(SSP_CTRL0_DATA_XFER, &ssp_regs->hw_ssp_ctrl0_set);
+
+ if (rx) {
+ if (mx28_wait_mask_clr(&ssp_regs->hw_ssp_status_reg,
+ SSP_STATUS_FIFO_EMPTY, MXS_SPI_MAX_TIMEOUT)) {
+ printf("MXS SPI: Timeout waiting for data\n");
+ return -1;
+ }
+
+ *rx = readl(&ssp_regs->hw_ssp_data);
+ rx++;
+ }
+
+ if (mx28_wait_mask_clr(&ssp_regs->hw_ssp_ctrl0_reg,
+ SSP_CTRL0_RUN, MXS_SPI_MAX_TIMEOUT)) {
+ printf("MXS SPI: Timeout waiting for finish\n");
+ return -1;
+ }
+ }
+
+ return 0;
+}