summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--MAINTAINERS12
-rw-r--r--README32
-rw-r--r--arch/arm/include/asm/arch-davinci/emac_defs.h1
-rw-r--r--arch/arm/lib/board.c19
-rw-r--r--arch/microblaze/cpu/start.S60
-rw-r--r--arch/microblaze/include/asm/byteorder.h4
-rw-r--r--arch/microblaze/lib/board.c12
-rw-r--r--arch/powerpc/cpu/74xx_7xx/start.S16
-rw-r--r--arch/powerpc/cpu/mpc512x/start.S3
-rw-r--r--arch/powerpc/cpu/mpc5xx/start.S16
-rw-r--r--arch/powerpc/cpu/mpc5xxx/start.S17
-rw-r--r--arch/powerpc/cpu/mpc8220/start.S17
-rw-r--r--arch/powerpc/cpu/mpc824x/start.S17
-rw-r--r--arch/powerpc/cpu/mpc8260/start.S18
-rw-r--r--arch/powerpc/cpu/mpc83xx/start.S19
-rw-r--r--arch/powerpc/cpu/mpc85xx/start.S2
-rw-r--r--arch/powerpc/cpu/mpc86xx/start.S15
-rw-r--r--arch/powerpc/cpu/mpc8xx/start.S16
-rw-r--r--arch/powerpc/cpu/ppc4xx/start.S6
-rw-r--r--arch/powerpc/lib/board.c17
-rw-r--r--board/a4m072/Makefile50
-rw-r--r--board/a4m072/a4m072.c506
-rw-r--r--board/a4m072/config.mk39
-rw-r--r--board/a4m072/mt46v32m16.h37
-rw-r--r--board/davinci/common/misc.c41
-rw-r--r--board/davinci/common/misc.h2
-rw-r--r--board/davinci/da8xxevm/da830evm.c12
-rw-r--r--board/davinci/dm365evm/dm365evm.c2
-rw-r--r--board/davinci/dvevm/dvevm.c2
-rw-r--r--board/davinci/sffsdr/sffsdr.c2
-rw-r--r--board/davinci/sonata/sonata.c2
-rw-r--r--board/pdm360ng/pdm360ng.c43
-rw-r--r--board/ppmc7xx/ppmc7xx.c7
-rw-r--r--board/xilinx/microblaze-generic/microblaze-generic.c13
-rw-r--r--boards.cfg1
-rw-r--r--common/cmd_display.c26
-rw-r--r--common/cmd_flash.c12
-rw-r--r--common/cmd_mem.c8
-rw-r--r--common/cmd_mtdparts.c261
-rw-r--r--common/cmd_nand.c339
-rw-r--r--common/cmd_net.c2
-rw-r--r--common/cmd_tsi148.c4
-rw-r--r--common/env_common.c2
-rw-r--r--common/fdt_support.c49
-rw-r--r--common/usb_storage.c39
-rw-r--r--doc/README.LED_display27
-rw-r--r--drivers/misc/Makefile1
-rw-r--r--drivers/misc/pdsp188x.c57
-rw-r--r--drivers/mtd/cfi_flash.c2
-rw-r--r--drivers/mtd/mtdcore.c44
-rw-r--r--drivers/mtd/mtdpart.c16
-rw-r--r--drivers/mtd/nand/nand_base.c245
-rw-r--r--drivers/mtd/nand/nand_bbt.c19
-rw-r--r--drivers/mtd/nand/nand_ecc.c17
-rw-r--r--drivers/mtd/nand/nand_util.c159
-rw-r--r--drivers/mtd/onenand/onenand_base.c1
-rw-r--r--drivers/mtd/spi/spi_flash.c126
-rw-r--r--drivers/net/Makefile1
-rw-r--r--drivers/net/at91_emac.c20
-rw-r--r--drivers/net/davinci_emac.c80
-rw-r--r--drivers/net/enc28j60.c1564
-rw-r--r--drivers/net/enc28j60.h251
-rw-r--r--drivers/net/enc28j60_lpc2292.c983
-rw-r--r--drivers/net/mpc5xxx_fec.c7
-rw-r--r--drivers/net/smc91111.c40
-rw-r--r--drivers/net/xilinx_emaclite.c88
-rw-r--r--drivers/qe/uec.c4
-rw-r--r--drivers/qe/uec_phy.c10
-rw-r--r--drivers/usb/gadget/ether.c21
-rw-r--r--drivers/usb/host/ohci-hcd.c2
-rw-r--r--drivers/usb/musb/musb_hcd.c23
-rw-r--r--examples/standalone/Makefile5
-rw-r--r--fs/fat/fat.c49
-rw-r--r--include/config_cmd_all.h1
-rw-r--r--include/configs/SMN42.h2
-rw-r--r--include/configs/a4m072.h387
-rw-r--r--include/configs/hmi1001.h1
-rw-r--r--include/configs/lpc2292sodimm.h2
-rw-r--r--include/configs/manroland/common.h5
-rw-r--r--include/configs/microblaze-generic.h236
-rw-r--r--include/fat.h4
-rw-r--r--include/fdt_support.h1
-rw-r--r--include/led-display.h36
-rw-r--r--include/linux/mtd/mtd.h8
-rw-r--r--include/linux/mtd/onenand.h1
-rw-r--r--include/mpc5xxx.h3
-rw-r--r--include/nand.h7
-rw-r--r--include/netdev.h4
-rw-r--r--lib/gunzip.c5
-rw-r--r--lib/zlib.c11
-rw-r--r--net/Makefile2
-rw-r--r--net/eth.c16
-rw-r--r--net/net.c11
-rw-r--r--tools/imls/Makefile2
94 files changed, 4503 insertions, 1924 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index a394ac9..aabd871 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -305,6 +305,10 @@ Andrea "llandre" Marson <andrea.marson@dave-tech.it>
PPChameleonEVB PPC405EP
+Tirumala Marri <tmarri@apm.com>
+
+ bluestone APM821XX
+
Reinhard Meyer <r.meyer@emk-elektronik.de>
TOP860 MPC860T
@@ -343,6 +347,10 @@ Daniel Poirot <dan.poirot@windriver.com>
sbc8240 MPC8240
sbc405 PPC405GP
+Sergei Poselenov <sposelenov@emcraft.com>
+
+ a4m072 MPC5200
+
Sudhakar Rajashekhara <sudhakar.raj@ti.com>
da850evm ARM926EJS (DA850/OMAP-L138)
@@ -498,10 +506,6 @@ Detlev Zundel <dzu@denx.de>
inka4x0 MPC5200
-Tirumala Marri <tmarri@apm.com>
-
- bluestone APM821XX
-
-------------------------------------------------------------------------
Unknown / orphaned boards:
diff --git a/README b/README
index f997a5d..197804e 100644
--- a/README
+++ b/README
@@ -2534,18 +2534,32 @@ to save the current settings.
- CONFIG_ENV_SIZE:
These two #defines specify the offset and size of the environment
- area within the first NAND device.
+ area within the first NAND device. CONFIG_ENV_OFFSET must be
+ aligned to an erase block boundary.
- - CONFIG_ENV_OFFSET_REDUND
+ - CONFIG_ENV_OFFSET_REDUND (optional):
This setting describes a second storage area of CONFIG_ENV_SIZE
- size used to hold a redundant copy of the environment data,
- so that there is a valid backup copy in case there is a
- power failure during a "saveenv" operation.
-
- Note: CONFIG_ENV_OFFSET and CONFIG_ENV_OFFSET_REDUND must be aligned
- to a block boundary, and CONFIG_ENV_SIZE must be a multiple of
- the NAND devices block size.
+ size used to hold a redundant copy of the environment data, so
+ that there is a valid backup copy in case there is a power failure
+ during a "saveenv" operation. CONFIG_ENV_OFFSET_RENDUND must be
+ aligned to an erase block boundary.
+
+ - CONFIG_ENV_RANGE (optional):
+
+ Specifies the length of the region in which the environment
+ can be written. This should be a multiple of the NAND device's
+ block size. Specifying a range with more erase blocks than
+ are needed to hold CONFIG_ENV_SIZE allows bad blocks within
+ the range to be avoided.
+
+ - CONFIG_ENV_OFFSET_OOB (optional):
+
+ Enables support for dynamically retrieving the offset of the
+ environment from block zero's out-of-band data. The
+ "nand env.oob" command can be used to record this offset.
+ Currently, CONFIG_ENV_OFFSET_REDUND is not supported when
+ using CONFIG_ENV_OFFSET_OOB.
- CONFIG_NAND_ENV_DST
diff --git a/arch/arm/include/asm/arch-davinci/emac_defs.h b/arch/arm/include/asm/arch-davinci/emac_defs.h
index 35a1585..76493a1 100644
--- a/arch/arm/include/asm/arch-davinci/emac_defs.h
+++ b/arch/arm/include/asm/arch-davinci/emac_defs.h
@@ -367,7 +367,6 @@ typedef struct {
int davinci_eth_phy_read(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t *data);
int davinci_eth_phy_write(u_int8_t phy_addr, u_int8_t reg_num, u_int16_t data);
-void davinci_eth_set_mac_addr(const u_int8_t *addr);
typedef struct
{
diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c
index 5f2dfd0..22bd2c9 100644
--- a/arch/arm/lib/board.c
+++ b/arch/arm/lib/board.c
@@ -409,15 +409,6 @@ void start_armboot (void)
enable_interrupts ();
/* Perform network card initialisation if necessary */
-#ifdef CONFIG_DRIVER_TI_EMAC
- /* XXX: this needs to be moved to board init */
-extern void davinci_eth_set_mac_addr (const u_int8_t *addr);
- if (getenv ("ethaddr")) {
- uchar enetaddr[6];
- eth_getenv_enetaddr("ethaddr", enetaddr);
- davinci_eth_set_mac_addr(enetaddr);
- }
-#endif
#if defined(CONFIG_DRIVER_SMC91111) || defined (CONFIG_DRIVER_LAN91C96)
/* XXX: this needs to be moved to board init */
@@ -821,16 +812,6 @@ void board_init_r (gd_t *id, ulong dest_addr)
enable_interrupts ();
/* Perform network card initialisation if necessary */
-#ifdef CONFIG_DRIVER_TI_EMAC
- /* XXX: this needs to be moved to board init */
-extern void davinci_eth_set_mac_addr (const u_int8_t *addr);
- if (getenv ("ethaddr")) {
- uchar enetaddr[6];
- eth_getenv_enetaddr("ethaddr", enetaddr);
- davinci_eth_set_mac_addr(enetaddr);
- }
-#endif
-
#if defined(CONFIG_DRIVER_SMC91111) || defined (CONFIG_DRIVER_LAN91C96)
/* XXX: this needs to be moved to board init */
if (getenv ("ethaddr")) {
diff --git a/arch/microblaze/cpu/start.S b/arch/microblaze/cpu/start.S
index 2e9a08d..7f60434 100644
--- a/arch/microblaze/cpu/start.S
+++ b/arch/microblaze/cpu/start.S
@@ -32,6 +32,22 @@ _start:
mts rmsr, r0 /* disable cache */
addi r1, r0, CONFIG_SYS_INIT_SP_OFFSET
addi r1, r1, -4 /* Decrement SP to top of memory */
+
+ /* Find-out if u-boot is running on BIG/LITTLE endian platform
+ * There are some steps which is necessary to keep in mind:
+ * 1. Setup offset value to r6
+ * 2. Store word offset value to address 0x0
+ * 3. Load just byte from address 0x0
+ * 4a) LITTLE endian - r10 contains 0x2 because it is the smallest
+ * value that's why is on address 0x0
+ * 4b) BIG endian - r10 contains 0x0 because 0x2 offset is on addr 0x3
+ */
+ addik r6, r0, 0x2 /* BIG/LITTLE endian offset */
+ swi r6, r0, 0
+ lbui r10, r0, 0
+ swi r6, r0, 0x40
+ swi r10, r0, 0x50
+
/* add opcode instruction for 32bit jump - 2 instruction imm & brai*/
addi r6, r0, 0xb0000000 /* hex b000 opcode imm */
swi r6, r0, 0x0 /* reset address */
@@ -75,26 +91,52 @@ _start:
/* user_vector_exception */
addik r6, r0, _exception_handler
sw r6, r1, r0
- lhu r7, r1, r0
- shi r7, r0, 0xa
- shi r6, r0, 0xe
+ /*
+ * BIG ENDIAN memory map for user exception
+ * 0x8: 0xB000XXXX
+ * 0xC: 0xB808XXXX
+ *
+ * then it is necessary to count address for storing the most significant
+ * 16bits from _exception_handler address and copy it to
+ * 0xa address. Big endian use offset in r10=0 that's why is it just
+ * 0xa address. The same is done for the least significant 16 bits
+ * for 0xe address.
+ *
+ * LITTLE ENDIAN memory map for user exception
+ * 0x8: 0xXXXX00B0
+ * 0xC: 0xXXXX08B8
+ *
+ * Offset is for little endian setup to 0x2. rsubi instruction decrease
+ * address value to ensure that points to proper place which is
+ * 0x8 for the most significant 16 bits and
+ * 0xC for the least significant 16 bits
+ */
+ lhu r7, r1, r10
+ rsubi r8, r10, 0xa
+ sh r7, r0, r8
+ rsubi r8, r10, 0xe
+ sh r6, r0, r8
#endif
#ifdef CONFIG_SYS_INTC_0
/* interrupt_handler */
addik r6, r0, _interrupt_handler
sw r6, r1, r0
- lhu r7, r1, r0
- shi r7, r0, 0x12
- shi r6, r0, 0x16
+ lhu r7, r1, r10
+ rsubi r8, r10, 0x12
+ sh r7, r0, r8
+ rsubi r8, r10, 0x16
+ sh r6, r0, r8
#endif
/* hardware exception */
addik r6, r0, _hw_exception_handler
sw r6, r1, r0
- lhu r7, r1, r0
- shi r7, r0, 0x22
- shi r6, r0, 0x26
+ lhu r7, r1, r10
+ rsubi r8, r10, 0x22
+ sh r7, r0, r8
+ rsubi r8, r10, 0x26
+ sh r6, r0, r8
/* enable instruction and data cache */
mfs r12, rmsr
diff --git a/arch/microblaze/include/asm/byteorder.h b/arch/microblaze/include/asm/byteorder.h
index a4a75b7..b2757a4 100644
--- a/arch/microblaze/include/asm/byteorder.h
+++ b/arch/microblaze/include/asm/byteorder.h
@@ -50,6 +50,10 @@ static __inline__ __u16 ___arch__swab16 (__u16 half_word)
#endif /* __GNUC__ */
+#ifdef __MICROBLAZEEL__
+#include <linux/byteorder/little_endian.h>
+#else
#include <linux/byteorder/big_endian.h>
+#endif
#endif /* __MICROBLAZE_BYTEORDER_H__ */
diff --git a/arch/microblaze/lib/board.c b/arch/microblaze/lib/board.c
index 3ff5c17..0ce040e 100644
--- a/arch/microblaze/lib/board.c
+++ b/arch/microblaze/lib/board.c
@@ -31,6 +31,7 @@
#include <version.h>
#include <watchdog.h>
#include <stdio_dev.h>
+#include <net.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -42,6 +43,7 @@ extern int gpio_init (void);
#ifdef CONFIG_SYS_INTC_0
extern int interrupts_init (void);
#endif
+
#if defined(CONFIG_CMD_NET)
extern int eth_init (bd_t * bis);
#endif
@@ -165,8 +167,14 @@ void board_init (void)
#if defined(CONFIG_CMD_NET)
/* IP Address */
- bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
- eth_init (bd);
+ bd->bi_ip_addr = getenv_IPaddr("ipaddr");
+
+ printf("Net: ");
+ eth_initialize(gd->bd);
+
+ uchar enetaddr[6];
+ eth_getenv_enetaddr("ethaddr", enetaddr);
+ printf("MAC: %pM\n", enetaddr);
#endif
/* main_loop */
diff --git a/arch/powerpc/cpu/74xx_7xx/start.S b/arch/powerpc/cpu/74xx_7xx/start.S
index a36af5a..47694aa 100644
--- a/arch/powerpc/cpu/74xx_7xx/start.S
+++ b/arch/powerpc/cpu/74xx_7xx/start.S
@@ -94,17 +94,7 @@ version_string:
. = EXC_OFF_SYS_RESET
.globl _start
_start:
- li r21, BOOTFLAG_COLD /* Normal Power-On: Boot from FLASH */
b boot_cold
- sync
-
- . = EXC_OFF_SYS_RESET + 0x10
-
- .globl _start_warm
-_start_warm:
- li r21, BOOTFLAG_WARM /* Software reboot */
- b boot_warm
- sync
/* the boot code is located below the exception table */
@@ -188,7 +178,6 @@ _end_of_vectors:
. = 0x2000
boot_cold:
-boot_warm:
/* disable everything */
li r0, 0
mtspr HID0, r0
@@ -288,14 +277,11 @@ in_flash:
bl cpu_init_f
sync
- mr r3, r21
-
- /* r3: BOOTFLAG */
/* run 1st part of board init code (from Flash) */
bl board_init_f
sync
- /* NOTREACHED */
+ /* NOTREACHED - board_init_f() does not return */
.globl invalidate_bats
invalidate_bats:
diff --git a/arch/powerpc/cpu/mpc512x/start.S b/arch/powerpc/cpu/mpc512x/start.S
index d26b617..1047c51 100644
--- a/arch/powerpc/cpu/mpc512x/start.S
+++ b/arch/powerpc/cpu/mpc512x/start.S
@@ -100,7 +100,6 @@ version_string:
.globl _start
/* Start from here after reset/power on */
_start:
- li r21, BOOTFLAG_COLD /* Normal Power-On: Boot from FLASH */
b boot_cold
.globl _start_of_vectors
@@ -260,8 +259,6 @@ in_flash:
/* run low-level CPU init code (in Flash) */
bl cpu_init_f
- /* r3: BOOTFLAG */
- mr r3, r21
/* run 1st part of board init code (in Flash) */
bl board_init_f
diff --git a/arch/powerpc/cpu/mpc5xx/start.S b/arch/powerpc/cpu/mpc5xx/start.S
index 0af879e..4fd9b63 100644
--- a/arch/powerpc/cpu/mpc5xx/start.S
+++ b/arch/powerpc/cpu/mpc5xx/start.S
@@ -91,18 +91,6 @@ _start:
li r4, CONFIG_SYS_ISB /* Set ISB bit */
or r3, r3, r4
mtspr 638, r3
- li r21, BOOTFLAG_COLD /* Normal Power-On: Boot from FLASH */
- b boot_cold
-
- . = EXC_OFF_SYS_RESET + 0x20
-
- .globl _start_warm
-_start_warm:
- li r21, BOOTFLAG_WARM /* Software reboot */
- b boot_warm
-
-boot_cold:
-boot_warm:
/* Initialize machine status; enable machine check interrupt */
/*----------------------------------------------------------------------*/
@@ -188,10 +176,10 @@ in_flash:
/* r3: IMMR */
bl cpu_init_f /* run low-level CPU init code (from Flash) */
- mr r3, r21
- /* r3: BOOTFLAG */
bl board_init_f /* run 1st part of board init code (from Flash) */
+ /* NOTREACHED - board_init_f() does not return */
+
.globl _start_of_vectors
_start_of_vectors:
diff --git a/arch/powerpc/cpu/mpc5xxx/start.S b/arch/powerpc/cpu/mpc5xxx/start.S
index 8b9f09b..1385869 100644
--- a/arch/powerpc/cpu/mpc5xxx/start.S
+++ b/arch/powerpc/cpu/mpc5xxx/start.S
@@ -89,19 +89,6 @@ version_string:
. = EXC_OFF_SYS_RESET
.globl _start
_start:
- li r21, BOOTFLAG_COLD /* Normal Power-On */
- nop
- b boot_cold
-
- . = EXC_OFF_SYS_RESET + 0x10
-
- .globl _start_warm
-_start_warm:
- li r21, BOOTFLAG_WARM /* Software reboot */
- b boot_warm
-
-boot_cold:
-boot_warm:
mfmsr r5 /* save msr contents */
/* Move CSBoot and adjust instruction pointer */
@@ -175,10 +162,10 @@ lowboot_reentry:
/* r3: IMMR */
bl cpu_init_f /* run low-level CPU init code (in Flash)*/
- mr r3, r21
- /* r3: BOOTFLAG */
bl board_init_f /* run 1st part of board init code (in Flash)*/
+ /* NOTREACHED - board_init_f() does not return */
+
/*
* Vector Table
*/
diff --git a/arch/powerpc/cpu/mpc8220/start.S b/arch/powerpc/cpu/mpc8220/start.S
index 3d79d8e..c156e25 100644
--- a/arch/powerpc/cpu/mpc8220/start.S
+++ b/arch/powerpc/cpu/mpc8220/start.S
@@ -88,19 +88,6 @@ version_string:
. = EXC_OFF_SYS_RESET
.globl _start
_start:
- li r21, BOOTFLAG_COLD /* Normal Power-On */
- nop
- b boot_cold
-
- . = EXC_OFF_SYS_RESET + 0x10
-
- .globl _start_warm
-_start_warm:
- li r21, BOOTFLAG_WARM /* Software reboot */
- b boot_warm
-
-boot_cold:
-boot_warm:
mfmsr r5 /* save msr contents */
/* replace default MBAR base address from 0x80000000
@@ -144,10 +131,10 @@ boot_warm:
/* r3: IMMR */
bl cpu_init_f /* run low-level CPU init code (in Flash)*/
- mr r3, r21
- /* r3: BOOTFLAG */
bl board_init_f /* run 1st part of board init code (in Flash)*/
+ /* NOTREACHED - board_init_f() does not return */
+
/*
* Vector Table
*/
diff --git a/arch/powerpc/cpu/mpc824x/start.S b/arch/powerpc/cpu/mpc824x/start.S
index f3f595a..5b126bb 100644
--- a/arch/powerpc/cpu/mpc824x/start.S
+++ b/arch/powerpc/cpu/mpc824x/start.S
@@ -97,19 +97,6 @@ version_string:
. = EXC_OFF_SYS_RESET
.globl _start
_start:
- li r21, BOOTFLAG_COLD /* Normal Power-On: Boot from FLASH */
- b boot_cold
-
- . = EXC_OFF_SYS_RESET + 0x10
-
- .globl _start_warm
-_start_warm:
- li r21, BOOTFLAG_WARM /* Software reboot */
- b boot_warm
-
-boot_cold:
-boot_warm:
-
/* Initialize machine status; enable machine check interrupt */
/*----------------------------------------------------------------------*/
li r3, MSR_KERNEL /* Set FP, ME, RI flags */
@@ -198,10 +185,10 @@ in_flash:
/* r3: IMMR */
bl cpu_init_f /* run low-level CPU init code (from Flash) */
- mr r3, r21
- /* r3: BOOTFLAG */
bl board_init_f /* run 1st part of board init code (from Flash) */
+ /* NOTREACHED - board_init_f() does not return */
+
.globl _start_of_vectors
_start_of_vectors:
diff --git a/arch/powerpc/cpu/mpc8260/start.S b/arch/powerpc/cpu/mpc8260/start.S
index a435042..9485afa 100644
--- a/arch/powerpc/cpu/mpc8260/start.S
+++ b/arch/powerpc/cpu/mpc8260/start.S
@@ -161,18 +161,6 @@ _hrcw_table:
.globl _start
_start:
- li r21, BOOTFLAG_COLD /* Normal Power-On: Boot from FLASH*/
- nop
- b boot_cold
-
- . = EXC_OFF_SYS_RESET + 0x10
-
- .globl _start_warm
-_start_warm:
- li r21, BOOTFLAG_WARM /* Software reboot */
- b boot_warm
-
-boot_cold:
#if defined(CONFIG_MPC8260ADS) && defined(CONFIG_SYS_DEFAULT_IMMR)
lis r3, CONFIG_SYS_DEFAULT_IMMR@h
nop
@@ -185,7 +173,7 @@ boot_cold:
stw r4, 0(r3)
nop
#endif /* CONFIG_MPC8260ADS && CONFIG_SYS_DEFAULT_IMMR */
-boot_warm:
+
mfmsr r5 /* save msr contents */
#if defined(CONFIG_COGENT)
@@ -254,10 +242,10 @@ in_flash:
bl init_debug /* set up debugging stuff */
#endif
- mr r3, r21
- /* r3: BOOTFLAG */
bl board_init_f /* run 1st part of board init code (in Flash)*/
+ /* NOTREACHED - board_init_f() does not return */
+
/*
* Vector Table
*/
diff --git a/arch/powerpc/cpu/mpc83xx/start.S b/arch/powerpc/cpu/mpc83xx/start.S
index c7d85a8..bdce915 100644
--- a/arch/powerpc/cpu/mpc83xx/start.S
+++ b/arch/powerpc/cpu/mpc83xx/start.S
@@ -183,22 +183,9 @@ ppcDWload:
.globl _start
_start: /* time t 0 */
- li r21, BOOTFLAG_COLD /* Normal Power-On: Boot from FLASH*/
- nop
- b boot_cold
-
- . = EXC_OFF_SYS_RESET + 0x10
-
- .globl _start_warm
-_start_warm:
- li r21, BOOTFLAG_WARM /* Software reboot */
- b boot_warm
-
-
-boot_cold: /* time t 3 */
lis r4, CONFIG_DEFAULT_IMMR@h
nop
-boot_warm: /* time t 5 */
+
mfmsr r5 /* save msr contents */
/* 83xx manuals prescribe a specific sequence for updating IMMRBAR. */
@@ -302,11 +289,11 @@ in_flash:
/* run low-level CPU init code (in Flash)*/
bl cpu_init_f
- /* r3: BOOTFLAG */
- mr r3, r21
/* run 1st part of board init code (in Flash)*/
bl board_init_f
+ /* NOTREACHED - board_init_f() does not return */
+
#ifndef CONFIG_NAND_SPL
/*
* Vector Table
diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S
index 3278b10..91096ad 100644
--- a/arch/powerpc/cpu/mpc85xx/start.S
+++ b/arch/powerpc/cpu/mpc85xx/start.S
@@ -432,6 +432,8 @@ _start_cont:
bl board_init_f
isync
+ /* NOTREACHED - board_init_f() does not return */
+
#ifndef CONFIG_NAND_SPL
. = EXC_OFF_SYS_RESET
.globl _start_of_vectors
diff --git a/arch/powerpc/cpu/mpc86xx/start.S b/arch/powerpc/cpu/mpc86xx/start.S
index ed1e4ca..596053f 100644
--- a/arch/powerpc/cpu/mpc86xx/start.S
+++ b/arch/powerpc/cpu/mpc86xx/start.S
@@ -83,17 +83,7 @@ version_string:
. = EXC_OFF_SYS_RESET
.globl _start
_start:
- li r21, BOOTFLAG_COLD /* Normal Power-On: Boot from FLASH */
b boot_cold
- sync
-
- . = EXC_OFF_SYS_RESET + 0x10
-
- .globl _start_warm
-_start_warm:
- li r21, BOOTFLAG_WARM /* Software reboot */
- b boot_warm
- sync
/* the boot code is located below the exception table */
@@ -166,7 +156,6 @@ _end_of_vectors:
. = 0x2000
boot_cold:
-boot_warm:
/*
* NOTE: Only Cpu 0 will ever come here. Other cores go to an
* address specified by the BPTR
@@ -303,14 +292,12 @@ diag_done:
#endif
/* bl l2cache_enable */
- mr r3, r21
- /* r3: BOOTFLAG */
/* run 1st part of board init code (from Flash) */
bl board_init_f
sync
- /* NOTREACHED */
+ /* NOTREACHED - board_init_f() does not return */
.globl invalidate_bats
invalidate_bats:
diff --git a/arch/powerpc/cpu/mpc8xx/start.S b/arch/powerpc/cpu/mpc8xx/start.S
index 7cf602f..d6100ec 100644
--- a/arch/powerpc/cpu/mpc8xx/start.S
+++ b/arch/powerpc/cpu/mpc8xx/start.S
@@ -96,18 +96,6 @@ version_string:
_start:
lis r3, CONFIG_SYS_IMMR@h /* position IMMR */
mtspr 638, r3
- li r21, BOOTFLAG_COLD /* Normal Power-On: Boot from FLASH */
- b boot_cold
-
- . = EXC_OFF_SYS_RESET + 0x10
-
- .globl _start_warm
-_start_warm:
- li r21, BOOTFLAG_WARM /* Software reboot */
- b boot_warm
-
-boot_cold:
-boot_warm:
/* Initialize machine status; enable machine check interrupt */
/*----------------------------------------------------------------------*/
@@ -202,10 +190,10 @@ in_flash:
/* r3: IMMR */
bl cpu_init_f /* run low-level CPU init code (from Flash) */
- mr r3, r21
- /* r3: BOOTFLAG */
bl board_init_f /* run 1st part of board init code (from Flash) */
+ /* NOTREACHED - board_init_f() does not return */
+
.globl _start_of_vectors
_start_of_vectors:
diff --git a/arch/powerpc/cpu/ppc4xx/start.S b/arch/powerpc/cpu/ppc4xx/start.S
index c2d52bf..03bde4d 100644
--- a/arch/powerpc/cpu/ppc4xx/start.S
+++ b/arch/powerpc/cpu/ppc4xx/start.S
@@ -261,6 +261,7 @@
GET_GOT
bl cpu_init_f /* run low-level CPU init code (from Flash) */
bl board_init_f
+ /* NOTREACHED - board_init_f() does not return */
#endif
#if defined(CONFIG_SYS_RAMBOOT)
@@ -803,6 +804,7 @@ _start:
bl cpu_init_f /* run low-level CPU init code (from Flash) */
bl board_init_f
+ /* NOTREACHED - board_init_f() does not return */
#endif
#endif /* CONFIG_440 */
@@ -911,6 +913,7 @@ _start:
GET_GOT /* initialize GOT access */
bl board_init_f /* run first part of init code (from Flash) */
+ /* NOTREACHED - board_init_f() does not return */
#endif /* CONFIG_IOP480 */
@@ -1180,8 +1183,9 @@ _start:
bl cpu_init_f /* run low-level CPU init code (from Flash) */
- /* NEVER RETURNS! */
bl board_init_f /* run first part of init code (from Flash) */
+ /* NOTREACHED - board_init_f() does not return */
+
#endif /* CONFIG_NAND_SPL */
#endif /* CONFIG_405GP || CONFIG_405CR || CONFIG_405 || CONFIG_405EP */
diff --git a/arch/powerpc/lib/board.c b/arch/powerpc/lib/board.c
index bfdfa86..529f719 100644
--- a/arch/powerpc/lib/board.c
+++ b/arch/powerpc/lib/board.c
@@ -480,6 +480,7 @@ void board_init_f (ulong bootflag)
*/
addr_sp -= sizeof (bd_t);
bd = (bd_t *) addr_sp;
+ memset(bd, 0, sizeof(bd_t));
gd->bd = bd;
debug ("Reserving %zu Bytes for Board Info at: %08lx\n",
sizeof (bd_t), addr_sp);
@@ -512,9 +513,6 @@ void board_init_f (ulong bootflag)
#ifdef CONFIG_SYS_SRAM_BASE
bd->bi_sramstart = CONFIG_SYS_SRAM_BASE; /* start of SRAM memory */
bd->bi_sramsize = CONFIG_SYS_SRAM_SIZE; /* size of SRAM memory */
-#else
- bd->bi_sramstart = 0;
- bd->bi_sramsize = 0;
#endif
#if defined(CONFIG_8xx) || defined(CONFIG_8260) || defined(CONFIG_5xx) || \
@@ -739,14 +737,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
bd->bi_flashoffset = TEXT_BASE + flash_size;
# elif CONFIG_SYS_MONITOR_BASE == CONFIG_SYS_FLASH_BASE
bd->bi_flashoffset = monitor_flash_len; /* reserved area for startup monitor */
-# else
- bd->bi_flashoffset = 0;
# endif
-#else /* CONFIG_SYS_NO_FLASH */
-
- bd->bi_flashsize = 0;
- bd->bi_flashstart = 0;
- bd->bi_flashoffset = 0;
#endif /* !CONFIG_SYS_NO_FLASH */
WATCHDOG_RESET ();
@@ -803,14 +794,8 @@ void board_init_r (gd_t *id, ulong dest_addr)
if (s && ((*s == 'y') || (*s == 'Y'))) {
bd->bi_iic_fast[0] = 1;
bd->bi_iic_fast[1] = 1;
- } else {
- bd->bi_iic_fast[0] = 0;
- bd->bi_iic_fast[1] = 0;
}
}
-#else
- bd->bi_iic_fast[0] = 0;
- bd->bi_iic_fast[1] = 0;
#endif /* CONFIG_I2CFAST */
#endif /* CONFIG_405GP, CONFIG_405EP */
#endif /* CONFIG_SYS_EXTBDINFO */
diff --git a/board/a4m072/Makefile b/board/a4m072/Makefile
new file mode 100644
index 0000000..442e2d0
--- /dev/null
+++ b/board/a4m072/Makefile
@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2003-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := $(BOARD).o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/a4m072/a4m072.c b/board/a4m072/a4m072.c
new file mode 100644
index 0000000..ae7ccbb
--- /dev/null
+++ b/board/a4m072/a4m072.c
@@ -0,0 +1,506 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2004
+ * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
+ *
+ * (C) Copyright 2010
+ * Sergei Poselenov, Emcraft Systems, sposelenov@emcraft.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc5xxx.h>
+#include <pci.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <libfdt.h>
+#include <netdev.h>
+#include <led-display.h>
+#include <linux/err.h>
+
+#include "mt46v32m16.h"
+
+#ifndef CONFIG_SYS_RAMBOOT
+static void sdram_start (int hi_addr)
+{
+ long hi_addr_bit = hi_addr ? 0x01000000 : 0;
+ long control = SDRAM_CONTROL | hi_addr_bit;
+
+ /* unlock mode register */
+ out_be32((void *)MPC5XXX_SDRAM_CTRL, control | 0x80000000);
+ __asm__ volatile ("sync");
+
+ /* precharge all banks */
+ out_be32((void *)MPC5XXX_SDRAM_CTRL, control | 0x80000002);
+ __asm__ volatile ("sync");
+
+#if SDRAM_DDR
+ /* set mode register: extended mode */
+ out_be32((void *)MPC5XXX_SDRAM_MODE, SDRAM_EMODE);
+ __asm__ volatile ("sync");
+
+ /* set mode register: reset DLL */
+ out_be32((void *)MPC5XXX_SDRAM_MODE, SDRAM_MODE | 0x04000000);
+ __asm__ volatile ("sync");
+#endif
+
+ /* precharge all banks */
+ out_be32((void *)MPC5XXX_SDRAM_CTRL, control | 0x80000002);
+ __asm__ volatile ("sync");
+
+ /* auto refresh */
+ out_be32((void *)MPC5XXX_SDRAM_CTRL, control | 0x80000004);
+ __asm__ volatile ("sync");
+
+ /* set mode register */
+ out_be32((void *)MPC5XXX_SDRAM_MODE, SDRAM_MODE);
+ __asm__ volatile ("sync");
+
+ /* normal operation */
+ out_be32((void *)MPC5XXX_SDRAM_CTRL, control);
+ __asm__ volatile ("sync");
+}
+#endif
+
+/*
+ * ATTENTION: Although partially referenced initdram does NOT make real use
+ * use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
+ * is something else than 0x00000000.
+ */
+
+phys_size_t initdram (int board_type)
+{
+ ulong dramsize = 0;
+ uint svr, pvr;
+
+#ifndef CONFIG_SYS_RAMBOOT
+ ulong test1, test2;
+
+ /* setup SDRAM chip selects */
+ out_be32((void *)MPC5XXX_SDRAM_CS0CFG, 0x0000001e); /* 2GB at 0x0 */
+ out_be32((void *)MPC5XXX_SDRAM_CS1CFG, 0x80000000); /* disabled */
+ __asm__ volatile ("sync");
+
+ /* setup config registers */
+ out_be32((void *)MPC5XXX_SDRAM_CONFIG1, SDRAM_CONFIG1);
+ out_be32((void *)MPC5XXX_SDRAM_CONFIG2, SDRAM_CONFIG2);
+ __asm__ volatile ("sync");
+
+#if SDRAM_DDR
+ /* set tap delay */
+ out_be32((void *)MPC5XXX_CDM_PORCFG, SDRAM_TAPDELAY);
+ __asm__ volatile ("sync");
+#endif
+
+ /* find RAM size using SDRAM CS0 only */
+ sdram_start(0);
+ test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
+ sdram_start(1);
+ test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
+ if (test1 > test2) {
+ sdram_start(0);
+ dramsize = test1;
+ } else {
+ dramsize = test2;
+ }
+
+ /* memory smaller than 1MB is impossible */
+ if (dramsize < (1 << 20)) {
+ dramsize = 0;
+ }
+
+ /* set SDRAM CS0 size according to the amount of RAM found */
+ if (dramsize > 0) {
+ out_be32((void *)MPC5XXX_SDRAM_CS0CFG,
+ 0x13 + __builtin_ffs(dramsize >> 20) - 1);
+ } else {
+ out_be32((void *)MPC5XXX_SDRAM_CS0CFG, 0); /* disabled */
+ }
+
+#else /* CONFIG_SYS_RAMBOOT */
+
+ /* retrieve size of memory connected to SDRAM CS0 */
+ dramsize = in_be32((void *)MPC5XXX_SDRAM_CS0CFG) & 0xFF;
+ if (dramsize >= 0x13) {
+ dramsize = (1 << (dramsize - 0x13)) << 20;
+ } else {
+ dramsize = 0;
+ }
+
+#endif /* CONFIG_SYS_RAMBOOT */
+
+ /*
+ * On MPC5200B we need to set the special configuration delay in the
+ * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM
+ * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190:
+ *
+ * "The SDelay should be written to a value of 0x00000004. It is
+ * required to account for changes caused by normal wafer processing
+ * parameters."
+ */
+ svr = get_svr();
+ pvr = get_pvr();
+ if ((SVR_MJREV(svr) >= 2) &&
+ (PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) {
+
+ out_be32((void *)MPC5XXX_SDRAM_SDELAY, 0x04);
+ __asm__ volatile ("sync");
+ }
+
+ return dramsize;
+}
+
+int checkboard (void)
+{
+ puts ("Board: A4M072\n");
+ return 0;
+}
+
+#ifdef CONFIG_PCI
+static struct pci_controller hose;
+
+extern void pci_mpc5xxx_init(struct pci_controller *);
+
+void pci_init_board(void)
+{
+ pci_mpc5xxx_init(&hose);
+}
+#endif
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+void
+ft_board_setup(void *blob, bd_t *bd)
+{
+ ft_cpu_setup(blob, bd);
+}
+#endif
+
+int board_eth_init(bd_t *bis)
+{
+ int rv, num_if = 0;
+
+ /* Initialize TSECs first */
+ if ((rv = cpu_eth_init(bis)) >= 0)
+ num_if += rv;
+ else
+ printf("ERROR: failed to initialize FEC.\n");
+
+ if ((rv = pci_eth_init(bis)) >= 0)
+ num_if += rv;
+ else
+ printf("ERROR: failed to initialize PCI Ethernet.\n");
+
+ return num_if;
+}
+/*
+ * Miscellaneous late-boot configurations
+ *
+ * Initialize EEPROM write-protect GPIO pin.
+ */
+int misc_init_r(void)
+{
+#if defined(CONFIG_SYS_EEPROM_WREN)
+ /* Enable GPIO pin */
+ setbits_be32((void *)MPC5XXX_WU_GPIO_ENABLE, CONFIG_SYS_EEPROM_WP);
+ /* Set direction, output */
+ setbits_be32((void *)MPC5XXX_WU_GPIO_DIR, CONFIG_SYS_EEPROM_WP);
+ /* De-assert write enable */
+ setbits_be32((void *)MPC5XXX_WU_GPIO_DATA_O, CONFIG_SYS_EEPROM_WP);
+#endif
+ return 0;
+}
+#if defined(CONFIG_SYS_EEPROM_WREN)
+/* Input: <dev_addr> I2C address of EEPROM device to enable.
+ * <state> -1: deliver current state
+ * 0: disable write
+ * 1: enable write
+ * Returns: -1: wrong device address
+ * 0: dis-/en- able done
+ * 0/1: current state if <state> was -1.
+ */
+int eeprom_write_enable (unsigned dev_addr, int state)
+{
+ if (CONFIG_SYS_I2C_EEPROM_ADDR != dev_addr) {
+ return -1;
+ } else {
+ switch (state) {
+ case 1:
+ /* Enable write access */
+ clrbits_be32((void *)MPC5XXX_WU_GPIO_DATA_O, CONFIG_SYS_EEPROM_WP);
+ state = 0;
+ break;
+ case 0:
+ /* Disable write access */
+ setbits_be32((void *)MPC5XXX_WU_GPIO_DATA_O, CONFIG_SYS_EEPROM_WP);
+ state = 0;
+ break;
+ default:
+ /* Read current status back. */
+ state = (0 == (in_be32((void *)MPC5XXX_WU_GPIO_DATA_O) &
+ CONFIG_SYS_EEPROM_WP));
+ break;
+ }
+ }
+ return state;
+}
+#endif
+
+#ifdef CONFIG_CMD_DISPLAY
+#define DISPLAY_BUF_SIZE 2
+static u8 display_buf[DISPLAY_BUF_SIZE];
+static u8 display_putc_pos;
+static u8 display_out_pos;
+
+static u8 display_dot_enable;
+
+void display_set(int cmd) {
+
+ if (cmd & DISPLAY_CLEAR) {
+ display_buf[0] = display_buf[1] = 0;
+ }
+
+ if (cmd & DISPLAY_HOME) {
+ display_putc_pos = 0;
+ }
+
+ if (cmd & DISPLAY_MARK) {
+ display_dot_enable = 1;
+ } else {
+ display_dot_enable = 0;
+ }
+}
+
+#define SEG_A (1<<0)
+#define SEG_B (1<<1)
+#define SEG_C (1<<2)
+#define SEG_D (1<<3)
+#define SEG_E (1<<4)
+#define SEG_F (1<<5)
+#define SEG_G (1<<6)
+#define SEG_P (1<<7)
+#define SEG__ 0
+
+/*
+ * +- A -+
+ * | |
+ * F B
+ * | |
+ * +- G -+
+ * | |
+ * E C
+ * | |
+ * +- D -+ P
+ *
+ * 0..9 index 0..9
+ * A..Z index 10..35
+ * - index 36
+ * _ index 37
+ */
+
+#define SYMBOL_DASH (36)
+#define SYMBOL_UNDERLINE (37)
+
+static u8 display_char2seg7_tbl[]=
+{
+ SEG_A | SEG_B | SEG_C | SEG_D | SEG_E | SEG_F, /* 0 */
+ SEG_B | SEG_C, /* 1 */
+ SEG_A | SEG_B | SEG_D | SEG_E | SEG_G, /* 2 */
+ SEG_A | SEG_B | SEG_C | SEG_D | SEG_G, /* 3 */
+ SEG_B | SEG_C | SEG_F | SEG_G, /* 4 */
+ SEG_A | SEG_C | SEG_D | SEG_F | SEG_G, /* 5 */
+ SEG_A | SEG_C | SEG_D | SEG_E | SEG_F | SEG_G, /* 6 */
+ SEG_A | SEG_B | SEG_C, /* 7 */
+ SEG_A | SEG_B | SEG_C | SEG_D | SEG_E | SEG_F | SEG_G, /* 8 */
+ SEG_A | SEG_B | SEG_C | SEG_D | SEG_F | SEG_G, /* 9 */
+ SEG_A | SEG_B | SEG_C | SEG_E | SEG_F | SEG_G, /* A */
+ SEG_C | SEG_D | SEG_E | SEG_F | SEG_G, /* b */
+ SEG_A | SEG_D | SEG_E | SEG_F, /* C */
+ SEG_B | SEG_C | SEG_D | SEG_E | SEG_G, /* d */
+ SEG_A | SEG_D | SEG_E | SEG_F | SEG_G, /* E */
+ SEG_A | SEG_E | SEG_F | SEG_G, /* F */
+ SEG_A | SEG_B | SEG_C | SEG_D | SEG_F | SEG_G, /* g */
+ SEG_B | SEG_C | SEG_E | SEG_F | SEG_G, /* H */
+ SEG_E | SEG_F, /* I */
+ SEG_B | SEG_C | SEG_D | SEG_E, /* J */
+ SEG_A, /* K - special 1 */
+ SEG_D | SEG_E | SEG_F, /* L */
+ SEG_B, /* m - special 2 */
+ SEG_C | SEG_E | SEG_G, /* n */
+ SEG_C | SEG_D | SEG_E | SEG_G, /* o */
+ SEG_A | SEG_B | SEG_E | SEG_F | SEG_G, /* P */
+ SEG_A | SEG_B | SEG_C | SEG_F | SEG_G, /* q */
+ SEG_E | SEG_G, /* r */
+ SEG_A | SEG_C | SEG_D | SEG_F | SEG_G, /* S */
+ SEG_D | SEG_E | SEG_F | SEG_G, /* t */
+ SEG_B | SEG_C | SEG_D | SEG_E | SEG_F, /* U */
+ SEG_C | SEG_D | SEG_E | SEG_F, /* V */
+ SEG_C, /* w - special 3 */
+ SEG_B | SEG_C | SEG_E | SEG_F | SEG_G, /* X */
+ SEG_B | SEG_C | SEG_D | SEG_F | SEG_G, /* Y */
+ SEG_A | SEG_B | SEG_D | SEG_E | SEG_G, /* Z */
+ SEG_G, /* - */
+ SEG_D /* _ */
+};
+
+/* Convert char to the LED segments representation */
+static u8 display_char2seg7(char c)
+{
+ u8 val = 0;
+
+ if (c >= '0' && c <= '9')
+ c -= '0';
+ else if (c >= 'a' && c <= 'z')
+ c -= 'a' - 10;
+ else if (c >= 'A' && c <= 'Z')
+ c -= 'A' - 10;
+ else if (c == '-')
+ c = SYMBOL_DASH;
+ else if ((c == '_') || (c == '.'))
+ c = SYMBOL_UNDERLINE;
+ else
+ c = ' '; /* display unsupported symbols as space */
+
+ if (c != ' ')
+ val = display_char2seg7_tbl[(int)c];
+
+ /* Handle DP LED here */
+ if (display_dot_enable) {
+ val |= SEG_P;
+ }
+
+ return val;
+}
+
+static inline int display_putc_nomark(char c)
+{
+ if (display_putc_pos >= DISPLAY_BUF_SIZE)
+ return -1;
+
+ display_buf[display_putc_pos++] = display_char2seg7(c);
+ /* one-symbol message should be steady */
+ if (display_putc_pos == 1)
+ display_buf[display_putc_pos] = display_char2seg7(c);
+
+ return c;
+}
+
+int display_putc(char c)
+{
+ /* Mark the codes from the "display" command with the DP LED */
+ display_set(DISPLAY_MARK);
+ return display_putc_nomark(c);
+}
+
+/*
+ * Flush current symbol to the LED display hardware
+ */
+static inline void display_flush(void)
+{
+ u32 val = display_buf[display_out_pos];
+
+ val |= (val << 8) | (val << 16) | (val << 24);
+ out_be32((void *)CONFIG_SYS_DISP_CHR_RAM, val);
+}
+
+/*
+ * Output contents of the software display buffer to the LED display every 0.5s
+ */
+void board_show_activity(ulong timestamp)
+{
+ static ulong last;
+ static u8 once;
+
+ if (!once || (timestamp - last >= (CONFIG_SYS_HZ / 2))) {
+ display_flush();
+ display_out_pos ^= 1;
+ last = timestamp;
+ once = 1;
+ }
+}
+
+/*
+ * Empty fake function
+ */
+void show_activity(int arg)
+{
+}
+#endif
+#if defined (CONFIG_SHOW_BOOT_PROGRESS)
+static int a4m072_status2code(int status, char *buf)
+{
+ char c = 0;
+
+ if (((status > 0) && (status <= 8)) ||
+ ((status >= 100) && (status <= 108)) ||
+ ((status < 0) && (status >= -9)) ||
+ (status == -100) || (status == -101) ||
+ ((status <= -103) && (status >= -113))) {
+ c = '5';
+ } else if (((status >= 9) && (status <= 14)) ||
+ ((status >= 120) && (status <= 123)) ||
+ ((status >= 125) && (status <= 129)) ||
+ ((status >= -13) && (status <= -10)) ||
+ (status == -120) || (status == -122) ||
+ ((status <= -124) && (status >= -127)) ||
+ (status == -129)) {
+ c = '8';
+ } else if (status == 15) {
+ c = '9';
+ } else if ((status <= -30) && (status >= -32)) {
+ c = 'A';
+ } else if (((status <= -35) && (status >= -40)) ||
+ ((status <= -42) && (status >= -51)) ||
+ ((status <= -53) && (status >= -58)) ||
+ (status == -64) ||
+ ((status <= -80) && (status >= -83)) ||
+ (status == -130) || (status == -140) ||
+ (status == -150)) {
+ c = 'B';
+ }
+
+ if (c == 0)
+ return -EINVAL;
+
+ buf[0] = (status < 0) ? '-' : c;
+ buf[1] = c;
+
+ return 0;
+}
+
+void show_boot_progress(int status)
+{
+ char buf[2];
+
+ if (a4m072_status2code(status, buf) < 0)
+ return;
+
+ display_set(0); /* Clear DP Led */
+ display_putc_nomark(buf[0]);
+ display_putc_nomark(buf[1]);
+ display_set(DISPLAY_HOME);
+ display_out_pos = 0; /* reset output position */
+
+ /* we want to flush status 15 now */
+ if (status == 15)
+ display_flush();
+}
+#endif
diff --git a/board/a4m072/config.mk b/board/a4m072/config.mk
new file mode 100644
index 0000000..c6ba51d
--- /dev/null
+++ b/board/a4m072/config.mk
@@ -0,0 +1,39 @@
+#
+# (C) Copyright 2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# a4m072 board:
+#
+# Valid values for TEXT_BASE is:
+#
+# 0xFE000000 boot low
+#
+
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
+
+ifndef TEXT_BASE
+## Standard: boot low
+TEXT_BASE = 0xFE000000
+endif
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
diff --git a/board/a4m072/mt46v32m16.h b/board/a4m072/mt46v32m16.h
new file mode 100644
index 0000000..d7561fb
--- /dev/null
+++ b/board/a4m072/mt46v32m16.h
@@ -0,0 +1,37 @@
+/*
+ * (C) Copyright 2004
+ * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#define SDRAM_DDR 1 /* is DDR */
+
+#if defined(CONFIG_MPC5200)
+/* Settings for XLB = 132 MHz */
+#define SDRAM_MODE 0x018D0000
+#define SDRAM_EMODE 0x40010000
+#define SDRAM_CONTROL 0x704f0f00
+#define SDRAM_CONFIG1 0x73722930
+#define SDRAM_CONFIG2 0x47770000
+#define SDRAM_TAPDELAY 0x10000000
+
+#else
+#error CONFIG_MPC5200 not defined
+#endif
diff --git a/board/davinci/common/misc.c b/board/davinci/common/misc.c
index 86a875e..b60a46e 100644
--- a/board/davinci/common/misc.c
+++ b/board/davinci/common/misc.c
@@ -85,45 +85,22 @@ err:
return 0;
}
-/* If there is a MAC address in the environment, and if it is not identical to
- * the MAC address in the EEPROM, then a warning is printed and the MAC address
- * from the environment is used.
- *
+/*
* If there is no MAC address in the environment, then it will be initialized
* (silently) from the value in the EEPROM.
*/
-void dv_configure_mac_address(uint8_t *rom_enetaddr)
+void davinci_sync_env_enetaddr(uint8_t *rom_enetaddr)
{
- int i;
- u_int8_t env_enetaddr[6];
- char *tmp = getenv("ethaddr");
- char *end;
-
- /* Read Ethernet MAC address from the U-Boot environment.
- * If it is not defined, env_enetaddr[] will be cleared. */
- for (i = 0; i < 6; i++) {
- env_enetaddr[i] = tmp ? simple_strtoul(tmp, &end, 16) : 0;
- if (tmp)
- tmp = (*end) ? end+1 : end;
- }
-
- /* Check if EEPROM and U-Boot environment MAC addresses match. */
- if (memcmp(env_enetaddr, "\0\0\0\0\0\0", 6) != 0 &&
- memcmp(env_enetaddr, rom_enetaddr, 6) != 0) {
- printf("Warning: MAC addresses don't match:\n");
- printf(" EEPROM MAC address: %pM\n", rom_enetaddr);
- printf(" \"ethaddr\" value: %pM\n", env_enetaddr) ;
- debug("### Using MAC address from environment\n");
- }
- if (!tmp) {
- char ethaddr[20];
+ uint8_t env_enetaddr[6];
+ eth_getenv_enetaddr_by_index(0, env_enetaddr);
+ if (!memcmp(env_enetaddr, "\0\0\0\0\0\0", 6)) {
/* There is no MAC address in the environment, so we initialize
* it from the value in the EEPROM. */
- sprintf(ethaddr, "%pM", rom_enetaddr) ;
- debug("### Setting environment from EEPROM MAC address = \"%s\"\n",
- ethaddr);
- setenv("ethaddr", ethaddr);
+ debug("### Setting environment from EEPROM MAC address = "
+ "\"%pM\"\n",
+ env_enetaddr);
+ eth_setenv_enetaddr("ethaddr", rom_enetaddr);
}
}
diff --git a/board/davinci/common/misc.h b/board/davinci/common/misc.h
index 329c369..a6ac3b9 100644
--- a/board/davinci/common/misc.h
+++ b/board/davinci/common/misc.h
@@ -46,7 +46,7 @@ struct pinmux_resource {
}
int dvevm_read_mac_address(uint8_t *buf);
-void dv_configure_mac_address(uint8_t *rom_enetaddr);
+void davinci_sync_env_enetaddr(uint8_t *rom_enetaddr);
int davinci_configure_pin_mux(const struct pinmux_config *pins, int n_pins);
int davinci_configure_pin_mux_items(const struct pinmux_resource *item,
int n_items);
diff --git a/board/davinci/da8xxevm/da830evm.c b/board/davinci/da8xxevm/da830evm.c
index 6baa860..8a9f988 100644
--- a/board/davinci/da8xxevm/da830evm.c
+++ b/board/davinci/da8xxevm/da830evm.c
@@ -196,19 +196,17 @@ int board_eth_init(bd_t *bis)
{
u_int8_t mac_addr[6];
u_int8_t switch_start_cmd[2] = { 0x01, 0x23 };
+ struct eth_device *dev;
/* Read Ethernet MAC address from EEPROM */
if (dvevm_read_mac_address(mac_addr))
/* set address env if not already set */
- dv_configure_mac_address(mac_addr);
+ davinci_sync_env_enetaddr(mac_addr);
/* read the address back from env */
if (!eth_getenv_enetaddr("ethaddr", mac_addr))
return -1;
- /* provide the resulting addr to the driver */
- davinci_eth_set_mac_addr(mac_addr);
-
/* enable the Ethernet switch in the 3 port PHY */
if (i2c_write(PHY_SW_I2C_ADDR, 0, 0,
switch_start_cmd, sizeof(switch_start_cmd))) {
@@ -222,6 +220,12 @@ int board_eth_init(bd_t *bis)
return -1;
}
+ dev = eth_get_dev();
+
+ /* provide the resulting addr to the driver */
+ memcpy(dev->enetaddr, mac_addr, 6);
+ dev->write_hwaddr(dev);
+
return 0;
}
#endif /* CONFIG_DRIVER_TI_EMAC */
diff --git a/board/davinci/dm365evm/dm365evm.c b/board/davinci/dm365evm/dm365evm.c
index 290eb99..85dbe2a 100644
--- a/board/davinci/dm365evm/dm365evm.c
+++ b/board/davinci/dm365evm/dm365evm.c
@@ -68,7 +68,7 @@ int board_eth_init(bd_t *bis)
/* Read Ethernet MAC address from EEPROM */
if (dvevm_read_mac_address(eeprom_enetaddr))
- dv_configure_mac_address(eeprom_enetaddr);
+ davinci_sync_env_enetaddr(eeprom_enetaddr);
davinci_emac_initialize();
diff --git a/board/davinci/dvevm/dvevm.c b/board/davinci/dvevm/dvevm.c
index 98937a9..073c21a 100644
--- a/board/davinci/dvevm/dvevm.c
+++ b/board/davinci/dvevm/dvevm.c
@@ -71,7 +71,7 @@ int misc_init_r(void)
/* Read Ethernet MAC address from EEPROM if available. */
if (dvevm_read_mac_address(eeprom_enetaddr))
- dv_configure_mac_address(eeprom_enetaddr);
+ davinci_sync_env_enetaddr(eeprom_enetaddr);
i2c_read(0x39, 0x00, 1, &video_mode, 1);
diff --git a/board/davinci/sffsdr/sffsdr.c b/board/davinci/sffsdr/sffsdr.c
index c24b9e1..657cf2b 100644
--- a/board/davinci/sffsdr/sffsdr.c
+++ b/board/davinci/sffsdr/sffsdr.c
@@ -141,7 +141,7 @@ int misc_init_r(void)
/* Read Ethernet MAC address from EEPROM if available. */
if (sffsdr_read_mac_address(eeprom_enetaddr))
- dv_configure_mac_address(eeprom_enetaddr);
+ davinci_sync_env_enetaddr(eeprom_enetaddr);
return(0);
}
diff --git a/board/davinci/sonata/sonata.c b/board/davinci/sonata/sonata.c
index 817970a..1dc42c4 100644
--- a/board/davinci/sonata/sonata.c
+++ b/board/davinci/sonata/sonata.c
@@ -70,7 +70,7 @@ int misc_init_r(void)
/* Read Ethernet MAC address from EEPROM if available. */
if (dvevm_read_mac_address(eeprom_enetaddr))
- dv_configure_mac_address(eeprom_enetaddr);
+ davinci_sync_env_enetaddr(eeprom_enetaddr);
return(0);
}
diff --git a/board/pdm360ng/pdm360ng.c b/board/pdm360ng/pdm360ng.c
index e8714e3..2082ad4 100644
--- a/board/pdm360ng/pdm360ng.c
+++ b/board/pdm360ng/pdm360ng.c
@@ -515,6 +515,46 @@ struct node_info nodes[] = {
};
#endif
+#if defined(CONFIG_VIDEO)
+/*
+ * EDID block has been generated using Phoenix EDID Designer 1.3.
+ * This tool creates a text file containing:
+ *
+ * EDID BYTES:
+ * 0x 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
+ * ------------------------------------------------
+ * 00 | 00 FF FF FF FF FF FF 00 42 C9 34 12 01 00 00 00
+ * 10 | 0A 0C 01 03 80 98 5B 78 CA 7E 50 A0 58 4E 96 25
+ * 20 | 1E 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
+ * 30 | 01 01 01 01 01 01 80 0C 20 00 31 E0 2D 10 2A 80
+ * 40 | 12 08 30 E4 10 00 00 18 00 00 00 FD 00 38 3C 1F
+ * 50 | 3C 04 0A 20 20 20 20 20 20 20 00 00 00 FF 00 50
+ * 60 | 4D 30 37 30 57 4C 33 0A 0A 0A 0A 0A 00 00 00 FF
+ * 70 | 00 41 30 30 30 30 30 30 30 30 30 30 30 31 00 D4
+ *
+ * Then this data has been manually converted to the char
+ * array below.
+ */
+static unsigned char edid_buf[128] = {
+ 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00,
+ 0x42, 0xC9, 0x34, 0x12, 0x01, 0x00, 0x00, 0x00,
+ 0x0A, 0x0C, 0x01, 0x03, 0x80, 0x98, 0x5B, 0x78,
+ 0xCA, 0x7E, 0x50, 0xA0, 0x58, 0x4E, 0x96, 0x25,
+ 0x1E, 0x50, 0x54, 0x00, 0x00, 0x00, 0x01, 0x01,
+ 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+ 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x80, 0x0C,
+ 0x20, 0x00, 0x31, 0xE0, 0x2D, 0x10, 0x2A, 0x80,
+ 0x12, 0x08, 0x30, 0xE4, 0x10, 0x00, 0x00, 0x18,
+ 0x00, 0x00, 0x00, 0xFD, 0x00, 0x38, 0x3C, 0x1F,
+ 0x3C, 0x04, 0x0A, 0x20, 0x20, 0x20, 0x20, 0x20,
+ 0x20, 0x20, 0x00, 0x00, 0x00, 0xFF, 0x00, 0x50,
+ 0x4D, 0x30, 0x37, 0x30, 0x57, 0x4C, 0x33, 0x0A,
+ 0x0A, 0x0A, 0x0A, 0x0A, 0x00, 0x00, 0x00, 0xFF,
+ 0x00, 0x41, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30,
+ 0x30, 0x30, 0x30, 0x30, 0x30, 0x31, 0x00, 0xD4,
+};
+#endif
+
void ft_board_setup(void *blob, bd_t *bd)
{
u32 val[8];
@@ -525,6 +565,9 @@ void ft_board_setup(void *blob, bd_t *bd)
#ifdef CONFIG_FDT_FIXUP_PARTITIONS
fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
#endif
+#if defined(CONFIG_VIDEO)
+ fdt_add_edid(blob, "fsl,mpc5121-diu", edid_buf);
+#endif
/* Fixup NOR FLASH mapping */
val[i++] = 0; /* chip select number */
diff --git a/board/ppmc7xx/ppmc7xx.c b/board/ppmc7xx/ppmc7xx.c
index 0cad897..5e7427f 100644
--- a/board/ppmc7xx/ppmc7xx.c
+++ b/board/ppmc7xx/ppmc7xx.c
@@ -19,8 +19,7 @@
/* Function prototypes */
-extern void unlock_ram_in_cache( void );
-extern void _start_warm(void);
+extern void _start(void);
/*
@@ -97,8 +96,8 @@ void do_reset( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] )
icache_disable();
dcache_disable();
- /* Jump to warm start (in RAM) */
- _start_warm();
+ /* Jump to cold reset point (in RAM) */
+ _start();
/* Should never get here */
while(1);
diff --git a/board/xilinx/microblaze-generic/microblaze-generic.c b/board/xilinx/microblaze-generic/microblaze-generic.c
index 838f131..744384c 100644
--- a/board/xilinx/microblaze-generic/microblaze-generic.c
+++ b/board/xilinx/microblaze-generic/microblaze-generic.c
@@ -27,6 +27,7 @@
#include <common.h>
#include <config.h>
+#include <netdev.h>
#include <asm/microblaze_intc.h>
#include <asm/asm.h>
@@ -66,3 +67,15 @@ int fsl_init2 (void) {
return 0;
}
#endif
+
+int board_eth_init(bd_t *bis)
+{
+ /*
+ * This board either has PCI NICs or uses the CPU's TSECs
+ * pci_eth_init() will return 0 if no NICs found, so in that case
+ * returning -1 will force cpu_eth_init() to be called.
+ */
+#ifdef CONFIG_XILINX_EMACLITE
+ return xilinx_emaclite_initialize(bis, XILINX_EMACLITE_BASEADDR);
+#endif
+}
diff --git a/boards.cfg b/boards.cfg
index 38fa570..132d178 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -91,6 +91,7 @@ DB64360 powerpc 74xx_7xx db64360 Marvell
DB64460 powerpc 74xx_7xx db64460 Marvell
aria powerpc mpc512x - davedenx
PATI powerpc mpc5xx pati mpl
+a4m072 powerpc mpc5xxx a4m072
BC3450 powerpc mpc5xxx bc3450
canmb powerpc mpc5xxx
cm5200 powerpc mpc5xxx
diff --git a/common/cmd_display.c b/common/cmd_display.c
index 6c11aa6..d5d5d8c 100644
--- a/common/cmd_display.c
+++ b/common/cmd_display.c
@@ -23,40 +23,32 @@
#include <common.h>
#include <command.h>
+#include <led-display.h>
#undef DEBUG_DISP
-#define DISP_SIZE 8
-#define CWORD_CLEAR 0x80
-#define CLEAR_DELAY (110 * 2)
-
int do_display (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
int i;
- int pos;
/* Clear display */
- *((volatile char*)(CONFIG_SYS_DISP_CWORD)) = CWORD_CLEAR;
- udelay(1000 * CLEAR_DELAY);
+ display_set(DISPLAY_CLEAR | DISPLAY_HOME);
if (argc < 2)
return (0);
- for (pos = 0, i = 1; i < argc && pos < DISP_SIZE; i++) {
- char *p = argv[i], c;
+ for (i = 1; i < argc; i++) {
+ char *p = argv[i];
- if (i > 1) {
- *((volatile uchar *) (CONFIG_SYS_DISP_CHR_RAM + pos++)) = ' ';
-#ifdef DEBUG_DISP
- putc(' ');
-#endif
+ if (i > 1) { /* Insert a space between strings */
+ display_putc(' ');
}
- while ((c = *p++) != '\0' && pos < DISP_SIZE) {
- *((volatile uchar *) (CONFIG_SYS_DISP_CHR_RAM + pos++)) = c;
+ while ((*p)) {
#ifdef DEBUG_DISP
- putc(c);
+ putc(*p);
#endif
+ display_putc(*p++);
}
}
diff --git a/common/cmd_flash.c b/common/cmd_flash.c
index 2a02eb9..4493948 100644
--- a/common/cmd_flash.c
+++ b/common/cmd_flash.c
@@ -31,7 +31,7 @@
#include <dataflash.h>
#endif
-#if defined(CONFIG_CMD_JFFS2) && defined(CONFIG_CMD_MTDPARTS)
+#if defined(CONFIG_CMD_MTDPARTS)
#include <jffs2/jffs2.h>
/* partition handling routines */
@@ -327,7 +327,7 @@ int do_flerase (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
flash_info_t *info;
ulong bank, addr_first, addr_last;
int n, sect_first, sect_last;
-#if defined(CONFIG_CMD_JFFS2) && defined(CONFIG_CMD_MTDPARTS)
+#if defined(CONFIG_CMD_MTDPARTS)
struct mtd_device *dev;
struct part_info *part;
u8 dev_type, dev_num, pnum;
@@ -357,7 +357,7 @@ int do_flerase (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
return rcode;
}
-#if defined(CONFIG_CMD_JFFS2) && defined(CONFIG_CMD_MTDPARTS)
+#if defined(CONFIG_CMD_MTDPARTS)
/* erase <part-id> - erase partition */
if ((argc == 2) && (mtd_id_parse(argv[1], NULL, &dev_type, &dev_num) == 0)) {
mtdparts_init();
@@ -463,7 +463,7 @@ int do_protect (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
#if !defined(CONFIG_SYS_NO_FLASH) || defined(CONFIG_HAS_DATAFLASH)
ulong addr_first, addr_last;
#endif
-#if defined(CONFIG_CMD_JFFS2) && defined(CONFIG_CMD_MTDPARTS)
+#if defined(CONFIG_CMD_MTDPARTS)
struct mtd_device *dev;
struct part_info *part;
u8 dev_type, dev_num, pnum;
@@ -553,7 +553,7 @@ int do_protect (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
return rcode;
}
-#if defined(CONFIG_CMD_JFFS2) && defined(CONFIG_CMD_MTDPARTS)
+#if defined(CONFIG_CMD_MTDPARTS)
/* protect on/off <part-id> */
if ((argc == 3) && (mtd_id_parse(argv[2], NULL, &dev_type, &dev_num) == 0)) {
mtdparts_init();
@@ -681,7 +681,7 @@ int flash_sect_protect (int p, ulong addr_first, ulong addr_last)
/**************************************************/
-#if defined(CONFIG_CMD_JFFS2) && defined(CONFIG_CMD_MTDPARTS)
+#if defined(CONFIG_CMD_MTDPARTS)
# define TMP_ERASE "erase <part-id>\n - erase partition\n"
# define TMP_PROT_ON "protect on <part-id>\n - protect partition\n"
# define TMP_PROT_OFF "protect off <part-id>\n - make partition writable\n"
diff --git a/common/cmd_mem.c b/common/cmd_mem.c
index 44834ea..f7a442a 100644
--- a/common/cmd_mem.c
+++ b/common/cmd_mem.c
@@ -337,6 +337,10 @@ int do_mem_cmp (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
ngood++;
addr1 += size;
addr2 += size;
+
+ /* reset watchdog from time to time */
+ if ((count % (64 << 10)) == 0)
+ WATCHDOG_RESET();
}
printf("Total of %ld %s%s were the same\n",
@@ -447,6 +451,10 @@ int do_mem_cp ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
*((u_char *)dest) = *((u_char *)addr);
addr += size;
dest += size;
+
+ /* reset watchdog from time to time */
+ if ((count % (64 << 10)) == 0)
+ WATCHDOG_RESET();
}
return 0;
}
diff --git a/common/cmd_mtdparts.c b/common/cmd_mtdparts.c
index ceec5a9..5481c88 100644
--- a/common/cmd_mtdparts.c
+++ b/common/cmd_mtdparts.c
@@ -15,6 +15,9 @@
* Parsing routines are based on driver/mtd/cmdline.c from the linux 2.4
* kernel tree.
*
+ * (C) Copyright 2008
+ * Harald Welte, OpenMoko, Inc., Harald Welte <laforge@openmoko.org>
+ *
* $Id: cmdlinepart.c,v 1.17 2004/11/26 11:18:47 lavinen Exp $
* Copyright 2002 SYSGO Real-Time Solutions GmbH
*
@@ -286,6 +289,29 @@ static void current_save(void)
index_partitions();
}
+
+/**
+ * Produce a mtd_info given a type and num.
+ *
+ * @param type mtd type
+ * @param num mtd number
+ * @param mtd a pointer to an mtd_info instance (output)
+ * @return 0 if device is valid, 1 otherwise
+ */
+static int get_mtd_info(u8 type, u8 num, struct mtd_info **mtd)
+{
+ char mtd_dev[16];
+
+ sprintf(mtd_dev, "%s%d", MTD_DEV_TYPE(type), num);
+ *mtd = get_mtd_device_nm(mtd_dev);
+ if (IS_ERR(*mtd)) {
+ printf("Device %s not found!\n", mtd_dev);
+ return 1;
+ }
+
+ return 0;
+}
+
/**
* Performs sanity check for supplied flash partition.
* Table of existing MTD flash devices is searched and partition device
@@ -297,17 +323,12 @@ static void current_save(void)
*/
static int part_validate_eraseblock(struct mtdids *id, struct part_info *part)
{
- struct mtd_info *mtd;
- char mtd_dev[16];
+ struct mtd_info *mtd = NULL;
int i, j;
ulong start;
- sprintf(mtd_dev, "%s%d", MTD_DEV_TYPE(id->type), id->num);
- mtd = get_mtd_device_nm(mtd_dev);
- if (IS_ERR(mtd)) {
- printf("Partition %s not found on device %s!\n", part->name, mtd_dev);
+ if (get_mtd_info(id->type, id->num, &mtd))
return 1;
- }
part->sector_size = mtd->erasesize;
@@ -684,20 +705,17 @@ static int part_parse(const char *const partdef, const char **ret, struct part_i
/**
* Check device number to be within valid range for given device type.
*
- * @param dev device to validate
+ * @param type mtd type
+ * @param num mtd number
+ * @param size a pointer to the size of the mtd device (output)
* @return 0 if device is valid, 1 otherwise
*/
int mtd_device_validate(u8 type, u8 num, u32 *size)
{
- struct mtd_info *mtd;
- char mtd_dev[16];
+ struct mtd_info *mtd = NULL;
- sprintf(mtd_dev, "%s%d", MTD_DEV_TYPE(type), num);
- mtd = get_mtd_device_nm(mtd_dev);
- if (IS_ERR(mtd)) {
- printf("Device %s not found!\n", mtd_dev);
+ if (get_mtd_info(type, num, &mtd))
return 1;
- }
*size = mtd->size;
@@ -1200,38 +1218,93 @@ static int generate_mtdparts_save(char *buf, u32 buflen)
return ret;
}
+#if defined(CONFIG_CMD_MTDPARTS_SHOW_NET_SIZES)
/**
- * Format and print out a partition list for each device from global device
- * list.
+ * Get the net size (w/o bad blocks) of the given partition.
+ *
+ * @param mtd the mtd info
+ * @param part the partition
+ * @return the calculated net size of this partition
*/
-static void list_partitions(void)
+static uint64_t net_part_size(struct mtd_info *mtd, struct part_info *part)
+{
+ uint64_t i, net_size = 0;
+
+ if (!mtd->block_isbad)
+ return part->size;
+
+ for (i = 0; i < part->size; i += mtd->erasesize) {
+ if (!mtd->block_isbad(mtd, part->offset + i))
+ net_size += mtd->erasesize;
+ }
+
+ return net_size;
+}
+#endif
+
+static void print_partition_table(void)
{
struct list_head *dentry, *pentry;
struct part_info *part;
struct mtd_device *dev;
int part_num;
- debug("\n---list_partitions---\n");
list_for_each(dentry, &devices) {
dev = list_entry(dentry, struct mtd_device, link);
+ /* list partitions for given device */
+ part_num = 0;
+#if defined(CONFIG_CMD_MTDPARTS_SHOW_NET_SIZES)
+ struct mtd_info *mtd;
+
+ if (get_mtd_info(dev->id->type, dev->id->num, &mtd))
+ return;
+
+ printf("\ndevice %s%d <%s>, # parts = %d\n",
+ MTD_DEV_TYPE(dev->id->type), dev->id->num,
+ dev->id->mtd_id, dev->num_parts);
+ printf(" #: name\t\tsize\t\tnet size\toffset\t\tmask_flags\n");
+
+ list_for_each(pentry, &dev->parts) {
+ u32 net_size;
+ char *size_note;
+
+ part = list_entry(pentry, struct part_info, link);
+ net_size = net_part_size(mtd, part);
+ size_note = part->size == net_size ? " " : " (!)";
+ printf("%2d: %-20s0x%08x\t0x%08x%s\t0x%08x\t%d\n",
+ part_num, part->name, part->size,
+ net_size, size_note, part->offset,
+ part->mask_flags);
+#else /* !defined(CONFIG_CMD_MTDPARTS_SHOW_NET_SIZES) */
printf("\ndevice %s%d <%s>, # parts = %d\n",
MTD_DEV_TYPE(dev->id->type), dev->id->num,
dev->id->mtd_id, dev->num_parts);
printf(" #: name\t\tsize\t\toffset\t\tmask_flags\n");
- /* list partitions for given device */
- part_num = 0;
list_for_each(pentry, &dev->parts) {
part = list_entry(pentry, struct part_info, link);
printf("%2d: %-20s0x%08x\t0x%08x\t%d\n",
part_num, part->name, part->size,
part->offset, part->mask_flags);
-
+#endif /* defined(CONFIG_CMD_MTDPARTS_SHOW_NET_SIZES) */
part_num++;
}
}
+
if (list_empty(&devices))
printf("no partitions defined\n");
+}
+
+/**
+ * Format and print out a partition list for each device from global device
+ * list.
+ */
+static void list_partitions(void)
+{
+ struct part_info *part;
+
+ debug("\n---list_partitions---\n");
+ print_partition_table();
/* current_mtd_dev is not NULL only when we have non empty device list */
if (current_mtd_dev) {
@@ -1355,6 +1428,101 @@ static int delete_partition(const char *id)
return 1;
}
+#if defined(CONFIG_CMD_MTDPARTS_SPREAD)
+/**
+ * Increase the size of the given partition so that it's net size is at least
+ * as large as the size member and such that the next partition would start on a
+ * good block if it were adjacent to this partition.
+ *
+ * @param mtd the mtd device
+ * @param part the partition
+ * @param next_offset pointer to the offset of the next partition after this
+ * partition's size has been modified (output)
+ */
+static void spread_partition(struct mtd_info *mtd, struct part_info *part,
+ uint64_t *next_offset)
+{
+ uint64_t net_size, padding_size = 0;
+ int truncated;
+
+ mtd_get_len_incl_bad(mtd, part->offset, part->size, &net_size,
+ &truncated);
+
+ /*
+ * Absorb bad blocks immediately following this
+ * partition also into the partition, such that
+ * the next partition starts with a good block.
+ */
+ if (!truncated) {
+ mtd_get_len_incl_bad(mtd, part->offset + net_size,
+ mtd->erasesize, &padding_size, &truncated);
+ if (truncated)
+ padding_size = 0;
+ else
+ padding_size -= mtd->erasesize;
+ }
+
+ if (truncated) {
+ printf("truncated partition %s to %lld bytes\n", part->name,
+ (uint64_t) net_size + padding_size);
+ }
+
+ part->size = net_size + padding_size;
+ *next_offset = part->offset + part->size;
+}
+
+/**
+ * Adjust all of the partition sizes, such that all partitions are at least
+ * as big as their mtdparts environment variable sizes and they each start
+ * on a good block.
+ *
+ * @return 0 on success, 1 otherwise
+ */
+static int spread_partitions(void)
+{
+ struct list_head *dentry, *pentry;
+ struct mtd_device *dev;
+ struct part_info *part;
+ struct mtd_info *mtd;
+ int part_num;
+ uint64_t cur_offs;
+
+ list_for_each(dentry, &devices) {
+ dev = list_entry(dentry, struct mtd_device, link);
+
+ if (get_mtd_info(dev->id->type, dev->id->num, &mtd))
+ return 1;
+
+ part_num = 0;
+ cur_offs = 0;
+ list_for_each(pentry, &dev->parts) {
+ part = list_entry(pentry, struct part_info, link);
+
+ debug("spread_partitions: device = %s%d, partition %d ="
+ " (%s) 0x%08x@0x%08x\n",
+ MTD_DEV_TYPE(dev->id->type), dev->id->num,
+ part_num, part->name, part->size,
+ part->offset);
+
+ if (cur_offs > part->offset)
+ part->offset = cur_offs;
+
+ spread_partition(mtd, part, &cur_offs);
+
+ part_num++;
+ }
+ }
+
+ index_partitions();
+
+ if (generate_mtdparts_save(last_parts, MTDPARTS_MAXLEN) != 0) {
+ printf("generated mtdparts too long, reseting to null\n");
+ return 1;
+ }
+ return 0;
+}
+#endif /* CONFIG_CMD_MTDPARTS_SPREAD */
+
/**
* Accept character string describing mtd partitions and call device_parse()
* for each entry. Add created devices to the global devices list.
@@ -1782,9 +1950,13 @@ int do_mtdparts(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
}
/* mtdparts add <mtd-dev> <size>[@<offset>] <name> [ro] */
- if (((argc == 5) || (argc == 6)) && (strcmp(argv[1], "add") == 0)) {
+ if (((argc == 5) || (argc == 6)) && (strncmp(argv[1], "add", 3) == 0)) {
#define PART_ADD_DESC_MAXLEN 64
char tmpbuf[PART_ADD_DESC_MAXLEN];
+#if defined(CONFIG_CMD_MTDPARTS_SPREAD)
+ struct mtd_info *mtd;
+ uint64_t next_offset;
+#endif
u8 type, num, len;
struct mtd_device *dev;
struct mtd_device *dev_tmp;
@@ -1819,15 +1991,25 @@ int do_mtdparts(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
debug("+ %s\t%d\t%s\n", MTD_DEV_TYPE(dev->id->type),
dev->id->num, dev->id->mtd_id);
- if ((dev_tmp = device_find(dev->id->type, dev->id->num)) == NULL) {
+ p = list_entry(dev->parts.next, struct part_info, link);
+
+#if defined(CONFIG_CMD_MTDPARTS_SPREAD)
+ if (get_mtd_info(dev->id->type, dev->id->num, &mtd))
+ return 1;
+
+ if (!strcmp(&argv[1][3], ".spread")) {
+ spread_partition(mtd, p, &next_offset);
+ debug("increased %s to %d bytes\n", p->name, p->size);
+ }
+#endif
+
+ dev_tmp = device_find(dev->id->type, dev->id->num);
+ if (dev_tmp == NULL) {
device_add(dev);
- } else {
+ } else if (part_add(dev_tmp, p) != 0) {
/* merge new partition with existing ones*/
- p = list_entry(dev->parts.next, struct part_info, link);
- if (part_add(dev_tmp, p) != 0) {
- device_del(dev);
- return 1;
- }
+ device_del(dev);
+ return 1;
}
if (generate_mtdparts_save(last_parts, MTDPARTS_MAXLEN) != 0) {
@@ -1845,6 +2027,11 @@ int do_mtdparts(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
return delete_partition(argv[2]);
}
+#if defined(CONFIG_CMD_MTDPARTS_SPREAD)
+ if ((argc == 2) && (strcmp(argv[1], "spread") == 0))
+ return spread_partitions();
+#endif /* CONFIG_CMD_MTDPARTS_SPREAD */
+
return cmd_usage(cmdtp);
}
@@ -1867,8 +2054,20 @@ U_BOOT_CMD(
" - delete partition (e.g. part-id = nand0,1)\n"
"mtdparts add <mtd-dev> <size>[@<offset>] [<name>] [ro]\n"
" - add partition\n"
+#if defined(CONFIG_CMD_MTDPARTS_SPREAD)
+ "mtdparts add.spread <mtd-dev> <size>[@<offset>] [<name>] [ro]\n"
+ " - add partition, padding size by skipping bad blocks\n"
+#endif
"mtdparts default\n"
- " - reset partition table to defaults\n\n"
+ " - reset partition table to defaults\n"
+#if defined(CONFIG_CMD_MTDPARTS_SPREAD)
+ "mtdparts spread\n"
+ " - adjust the sizes of the partitions so they are\n"
+ " at least as big as the mtdparts variable specifies\n"
+ " and they each start on a good block\n\n"
+#else
+ "\n"
+#endif /* CONFIG_CMD_MTDPARTS_SPREAD */
"-----\n\n"
"this command uses three environment variables:\n\n"
"'partition' - keeps current partition identifier\n\n"
diff --git a/common/cmd_nand.c b/common/cmd_nand.c
index 3f1d077..8a81237 100644
--- a/common/cmd_nand.c
+++ b/common/cmd_nand.c
@@ -10,6 +10,13 @@
* (C) Copyright 2006-2007 OpenMoko, Inc.
* Added 16-bit nand support
* (C) 2004 Texas Instruments
+ *
+ * Copyright 2010 Freescale Semiconductor
+ * The portions of this file whose copyright is held by Freescale and which
+ * are not considered a derived work of GPL v2-only code may be distributed
+ * and/or modified under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
*/
#include <common.h>
@@ -30,10 +37,16 @@ int find_dev_and_part(const char *id, struct mtd_device **dev,
u8 *part_num, struct part_info **part);
#endif
-static int nand_dump(nand_info_t *nand, ulong off, int only_oob)
+static int nand_dump(nand_info_t *nand, ulong off, int only_oob, int repeat)
{
int i;
u_char *datbuf, *oobbuf, *p;
+ static loff_t last;
+
+ if (repeat)
+ off = last + nand->writesize;
+
+ last = off;
datbuf = malloc(nand->writesize + nand->oobsize);
oobbuf = malloc(nand->oobsize);
@@ -85,74 +98,132 @@ static int nand_dump(nand_info_t *nand, ulong off, int only_oob)
/* ------------------------------------------------------------------------- */
-static inline int str2long(char *p, ulong *num)
+static int set_dev(int dev)
+{
+ if (dev < 0 || dev >= CONFIG_SYS_MAX_NAND_DEVICE ||
+ !nand_info[dev].name) {
+ puts("No such device\n");
+ return -1;
+ }
+
+ if (nand_curr_device == dev)
+ return 0;
+
+ printf("Device %d: %s", dev, nand_info[dev].name);
+ puts("... is now current device\n");
+ nand_curr_device = dev;
+
+#ifdef CONFIG_SYS_NAND_SELECT_DEVICE
+ board_nand_select_device(nand_info[dev].priv, dev);
+#endif
+
+ return 0;
+}
+
+static inline int str2off(const char *p, loff_t *num)
+{
+ char *endptr;
+
+ *num = simple_strtoull(p, &endptr, 16);
+ return *p != '\0' && *endptr == '\0';
+}
+
+static inline int str2long(const char *p, ulong *num)
{
char *endptr;
*num = simple_strtoul(p, &endptr, 16);
- return (*p != '\0' && *endptr == '\0') ? 1 : 0;
+ return *p != '\0' && *endptr == '\0';
}
-static int
-arg_off_size(int argc, char * const argv[], nand_info_t *nand, ulong *off, size_t *size)
+static int get_part(const char *partname, int *idx, loff_t *off, loff_t *size)
{
- int idx = nand_curr_device;
-#if defined(CONFIG_CMD_MTDPARTS)
+#ifdef CONFIG_CMD_MTDPARTS
struct mtd_device *dev;
struct part_info *part;
u8 pnum;
+ int ret;
- if (argc >= 1 && !(str2long(argv[0], off))) {
- if ((mtdparts_init() == 0) &&
- (find_dev_and_part(argv[0], &dev, &pnum, &part) == 0)) {
- if (dev->id->type != MTD_DEV_TYPE_NAND) {
- puts("not a NAND device\n");
- return -1;
- }
- *off = part->offset;
- if (argc >= 2) {
- if (!(str2long(argv[1], (ulong *)size))) {
- printf("'%s' is not a number\n", argv[1]);
- return -1;
- }
- if (*size > part->size)
- *size = part->size;
- } else {
- *size = part->size;
- }
- idx = dev->id->num;
- *nand = nand_info[idx];
- goto out;
- }
+ ret = mtdparts_init();
+ if (ret)
+ return ret;
+
+ ret = find_dev_and_part(partname, &dev, &pnum, &part);
+ if (ret)
+ return ret;
+
+ if (dev->id->type != MTD_DEV_TYPE_NAND) {
+ puts("not a NAND device\n");
+ return -1;
}
+
+ *off = part->offset;
+ *size = part->size;
+ *idx = dev->id->num;
+
+ ret = set_dev(*idx);
+ if (ret)
+ return ret;
+
+ return 0;
+#else
+ puts("offset is not a number\n");
+ return -1;
#endif
+}
- if (argc >= 1) {
- if (!(str2long(argv[0], off))) {
- printf("'%s' is not a number\n", argv[0]);
- return -1;
- }
- } else {
+static int arg_off(const char *arg, int *idx, loff_t *off, loff_t *maxsize)
+{
+ if (!str2off(arg, off))
+ return get_part(arg, idx, off, maxsize);
+
+ if (*off >= nand_info[*idx].size) {
+ puts("Offset exceeds device limit\n");
+ return -1;
+ }
+
+ *maxsize = nand_info[*idx].size - *off;
+ return 0;
+}
+
+static int arg_off_size(int argc, char *const argv[], int *idx,
+ loff_t *off, loff_t *size)
+{
+ int ret;
+ loff_t maxsize;
+
+ if (argc == 0) {
*off = 0;
+ *size = nand_info[*idx].size;
+ goto print;
}
- if (argc >= 2) {
- if (!(str2long(argv[1], (ulong *)size))) {
- printf("'%s' is not a number\n", argv[1]);
- return -1;
- }
- } else {
- *size = nand->size - *off;
+ ret = arg_off(argv[0], idx, off, &maxsize);
+ if (ret)
+ return ret;
+
+ if (argc == 1) {
+ *size = maxsize;
+ goto print;
}
-#if defined(CONFIG_CMD_MTDPARTS)
-out:
-#endif
- printf("device %d ", idx);
- if (*size == nand->size)
+ if (!str2off(argv[1], size)) {
+ printf("'%s' is not a number\n", argv[1]);
+ return -1;
+ }
+
+ if (*size > maxsize) {
+ puts("Size exceeds partition or device limit\n");
+ return -1;
+ }
+
+print:
+ printf("device %d ", *idx);
+ if (*size == nand_info[*idx].size)
puts("whole chip\n");
else
- printf("offset 0x%lx, size 0x%zx\n", *off, *size);
+ printf("offset 0x%llx, size 0x%llx\n",
+ (unsigned long long)*off, (unsigned long long)*size);
return 0;
}
@@ -200,14 +271,20 @@ static void do_nand_status(nand_info_t *nand)
#ifdef CONFIG_ENV_OFFSET_OOB
unsigned long nand_env_oob_offset;
-int do_nand_env_oob(cmd_tbl_t *cmdtp, nand_info_t *nand,
- int argc, char * const argv[])
+int do_nand_env_oob(cmd_tbl_t *cmdtp, int argc, char *const argv[])
{
int ret;
uint32_t oob_buf[ENV_OFFSET_SIZE/sizeof(uint32_t)];
-
+ nand_info_t *nand = &nand_info[0];
char *cmd = argv[1];
+ if (CONFIG_SYS_MAX_NAND_DEVICE == 0 || !nand->name) {
+ puts("no devices available\n");
+ return 1;
+ }
+
+ set_dev(0);
+
if (!strcmp(cmd, "get")) {
ret = get_nand_env_oob(nand, &nand_env_oob_offset);
if (ret)
@@ -215,16 +292,21 @@ int do_nand_env_oob(cmd_tbl_t *cmdtp, nand_info_t *nand,
printf("0x%08lx\n", nand_env_oob_offset);
} else if (!strcmp(cmd, "set")) {
- ulong addr;
- size_t dummy_size;
+ loff_t addr;
+ loff_t maxsize;
struct mtd_oob_ops ops;
+ int idx = 0;
if (argc < 3)
goto usage;
- if (arg_off_size(argc - 2, argv + 2, nand, &addr,
- &dummy_size) < 0) {
- printf("Offset or partition name expected\n");
+ if (arg_off(argv[2], &idx, &addr, &maxsize)) {
+ puts("Offset or partition name expected\n");
+ return 1;
+ }
+
+ if (idx != 0) {
+ puts("Partition not on first NAND device\n");
return 1;
}
@@ -264,8 +346,8 @@ int do_nand_env_oob(cmd_tbl_t *cmdtp, nand_info_t *nand,
if (addr != nand_env_oob_offset) {
printf("Verification of env offset in OOB failed: "
- "0x%08lx expected but got 0x%08lx\n",
- addr, nand_env_oob_offset);
+ "0x%08llx expected but got 0x%08lx\n",
+ (unsigned long long)addr, nand_env_oob_offset);
return 1;
}
} else {
@@ -293,9 +375,9 @@ static void nand_print_info(int idx)
int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
{
- int i, dev, ret = 0;
- ulong addr, off;
- size_t size;
+ int i, ret = 0;
+ ulong addr;
+ loff_t off, size;
char *cmd, *s;
nand_info_t *nand;
#ifdef CONFIG_SYS_NAND_QUIET
@@ -304,6 +386,8 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
int quiet = 0;
#endif
const char *quiet_str = getenv("quiet");
+ int dev = nand_curr_device;
+ int repeat = flag & CMD_FLAG_REPEAT;
/* at least two arguments please */
if (argc < 2)
@@ -314,6 +398,10 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
cmd = argv[1];
+ /* Only "dump" is repeatable. */
+ if (repeat && strcmp(cmd, "dump"))
+ return 0;
+
if (strcmp(cmd, "info") == 0) {
putc('\n');
@@ -325,68 +413,45 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
}
if (strcmp(cmd, "device") == 0) {
-
if (argc < 3) {
putc('\n');
- if ((nand_curr_device < 0) ||
- (nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE))
+ if (dev < 0 || dev >= CONFIG_SYS_MAX_NAND_DEVICE)
puts("no devices available\n");
else
- nand_print_info(nand_curr_device);
+ nand_print_info(dev);
return 0;
}
- dev = (int)simple_strtoul(argv[2], NULL, 10);
- if (dev < 0 || dev >= CONFIG_SYS_MAX_NAND_DEVICE || !nand_info[dev].name) {
- puts("No such device\n");
- return 1;
- }
- printf("Device %d: %s", dev, nand_info[dev].name);
- puts("... is now current device\n");
- nand_curr_device = dev;
-#ifdef CONFIG_SYS_NAND_SELECT_DEVICE
- /*
- * Select the chip in the board/cpu specific driver
- */
- board_nand_select_device(nand_info[dev].priv, dev);
-#endif
+ dev = (int)simple_strtoul(argv[2], NULL, 10);
+ set_dev(dev);
return 0;
}
- if (strcmp(cmd, "bad") != 0 && strcmp(cmd, "erase") != 0 &&
- strncmp(cmd, "dump", 4) != 0 &&
- strncmp(cmd, "read", 4) != 0 && strncmp(cmd, "write", 5) != 0 &&
- strcmp(cmd, "scrub") != 0 && strcmp(cmd, "markbad") != 0 &&
- strcmp(cmd, "biterr") != 0 &&
- strcmp(cmd, "lock") != 0 && strcmp(cmd, "unlock") != 0
-#ifdef CONFIG_ENV_OFFSET_OOB
- && strcmp(cmd, "env.oob") != 0
-#endif
- )
- goto usage;
-
#ifdef CONFIG_ENV_OFFSET_OOB
/* this command operates only on the first nand device */
- if (strcmp(cmd, "env.oob") == 0) {
- return do_nand_env_oob(cmdtp, &nand_info[0],
- argc - 1, argv + 1);
- }
+ if (strcmp(cmd, "env.oob") == 0)
+ return do_nand_env_oob(cmdtp, argc - 1, argv + 1);
#endif
- /* the following commands operate on the current device */
- if (nand_curr_device < 0 || nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE ||
- !nand_info[nand_curr_device].name) {
+ /* The following commands operate on the current device, unless
+ * overridden by a partition specifier. Note that if somehow the
+ * current device is invalid, it will have to be changed to a valid
+ * one before these commands can run, even if a partition specifier
+ * for another device is to be used.
+ */
+ if (dev < 0 || dev >= CONFIG_SYS_MAX_NAND_DEVICE ||
+ !nand_info[dev].name) {
puts("\nno devices available\n");
return 1;
}
- nand = &nand_info[nand_curr_device];
+ nand = &nand_info[dev];
if (strcmp(cmd, "bad") == 0) {
- printf("\nDevice %d bad blocks:\n", nand_curr_device);
+ printf("\nDevice %d bad blocks:\n", dev);
for (off = 0; off < nand->size; off += nand->erasesize)
if (nand_block_isbad(nand, off))
- printf(" %08lx\n", off);
+ printf(" %08llx\n", (unsigned long long)off);
return 0;
}
@@ -395,23 +460,52 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
* 0 1 2 3 4
* nand erase [clean] [off size]
*/
- if (strcmp(cmd, "erase") == 0 || strcmp(cmd, "scrub") == 0) {
+ if (strncmp(cmd, "erase", 5) == 0 || strncmp(cmd, "scrub", 5) == 0) {
nand_erase_options_t opts;
/* "clean" at index 2 means request to write cleanmarker */
int clean = argc > 2 && !strcmp("clean", argv[2]);
int o = clean ? 3 : 2;
- int scrub = !strcmp(cmd, "scrub");
+ int scrub = !strncmp(cmd, "scrub", 5);
+ int part = 0;
+ int chip = 0;
+ int spread = 0;
+ int args = 2;
+
+ if (cmd[5] != 0) {
+ if (!strcmp(&cmd[5], ".spread")) {
+ spread = 1;
+ } else if (!strcmp(&cmd[5], ".part")) {
+ part = 1;
+ args = 1;
+ } else if (!strcmp(&cmd[5], ".chip")) {
+ chip = 1;
+ args = 0;
+ } else {
+ goto usage;
+ }
+ }
+
+ /*
+ * Don't allow missing arguments to cause full chip/partition
+ * erases -- easy to do accidentally, e.g. with a misspelled
+ * variable name.
+ */
+ if (argc != o + args)
+ goto usage;
- printf("\nNAND %s: ", scrub ? "scrub" : "erase");
+ printf("\nNAND %s: ", cmd);
/* skip first two or three arguments, look for offset and size */
- if (arg_off_size(argc - o, argv + o, nand, &off, &size) != 0)
+ if (arg_off_size(argc - o, argv + o, &dev, &off, &size) != 0)
return 1;
+ nand = &nand_info[dev];
+
memset(&opts, 0, sizeof(opts));
opts.offset = off;
opts.length = size;
opts.jffs2 = clean;
opts.quiet = quiet;
+ opts.spread = spread;
if (scrub) {
puts("Warning: "
@@ -449,19 +543,14 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
if (argc < 3)
goto usage;
- s = strchr(cmd, '.');
off = (int)simple_strtoul(argv[2], NULL, 16);
-
- if (s != NULL && strcmp(s, ".oob") == 0)
- ret = nand_dump(nand, off, 1);
- else
- ret = nand_dump(nand, off, 0);
+ ret = nand_dump(nand, off, !strcmp(&cmd[4], ".oob"), repeat);
return ret == 0 ? 1 : 0;
-
}
if (strncmp(cmd, "read", 4) == 0 || strncmp(cmd, "write", 5) == 0) {
+ size_t rwsize;
int read;
if (argc < 4)
@@ -471,23 +560,26 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
read = strncmp(cmd, "read", 4) == 0; /* 1 = read, 0 = write */
printf("\nNAND %s: ", read ? "read" : "write");
- if (arg_off_size(argc - 3, argv + 3, nand, &off, &size) != 0)
+ if (arg_off_size(argc - 3, argv + 3, &dev, &off, &size) != 0)
return 1;
+ nand = &nand_info[dev];
+ rwsize = size;
+
s = strchr(cmd, '.');
if (!s || !strcmp(s, ".jffs2") ||
!strcmp(s, ".e") || !strcmp(s, ".i")) {
if (read)
- ret = nand_read_skip_bad(nand, off, &size,
+ ret = nand_read_skip_bad(nand, off, &rwsize,
(u_char *)addr);
else
- ret = nand_write_skip_bad(nand, off, &size,
+ ret = nand_write_skip_bad(nand, off, &rwsize,
(u_char *)addr);
} else if (!strcmp(s, ".oob")) {
/* out-of-band data */
mtd_oob_ops_t ops = {
.oobbuf = (u8 *)addr,
- .ooblen = size,
+ .ooblen = rwsize,
.mode = MTD_OOB_RAW
};
@@ -500,7 +592,7 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
return 1;
}
- printf(" %zu bytes %s: %s\n", size,
+ printf(" %zu bytes %s: %s\n", rwsize,
read ? "read" : "written", ret ? "ERROR" : "OK");
return ret == 0 ? 0 : 1;
@@ -564,7 +656,7 @@ int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
if (arg_off_size(argc - 2, argv + 2, nand, &off, &size) < 0)
return 1;
- if (!nand_unlock(nand, off, size)) {
+ if (!nand_unlock(&nand_info[dev], off, size)) {
puts("NAND flash successfully unlocked\n");
} else {
puts("Error unlocking NAND flash, "
@@ -588,11 +680,16 @@ U_BOOT_CMD(
"nand write - addr off|partition size\n"
" read/write 'size' bytes starting at offset 'off'\n"
" to/from memory address 'addr', skipping bad blocks.\n"
- "nand erase [clean] [off size] - erase 'size' bytes from\n"
- " offset 'off' (entire device if not specified)\n"
+ "nand erase[.spread] [clean] [off [size]] - erase 'size' bytes "
+ "from offset 'off'\n"
+ " With '.spread', erase enough for given file size, otherwise,\n"
+ " 'size' includes skipped bad blocks.\n"
+ "nand erase.part [clean] partition - erase entire mtd partition'\n"
+ "nand erase.chip [clean] - erase entire chip'\n"
"nand bad - show bad blocks\n"
"nand dump[.oob] off - dump page\n"
- "nand scrub - really clean NAND erasing bad blocks (UNSAFE)\n"
+ "nand scrub off size | scrub.part partition | scrub.chip\n"
+ " really clean NAND erasing bad blocks (UNSAFE)\n"
"nand markbad off [...] - mark bad block(s) at offset (UNSAFE)\n"
"nand biterr off - make a bit error at offset (UNSAFE)"
#ifdef CONFIG_CMD_NAND_LOCK_UNLOCK
diff --git a/common/cmd_net.c b/common/cmd_net.c
index 3ffb9df..44d17db 100644
--- a/common/cmd_net.c
+++ b/common/cmd_net.c
@@ -54,6 +54,7 @@ U_BOOT_CMD(
"[loadAddress] [[hostIPaddr:]bootfilename]"
);
+#ifdef CONFIG_CMD_RARP
int do_rarpb (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
return netboot_common (RARP, cmdtp, argc, argv);
@@ -64,6 +65,7 @@ U_BOOT_CMD(
"boot image via network using RARP/TFTP protocol",
"[loadAddress] [[hostIPaddr:]bootfilename]"
);
+#endif
#if defined(CONFIG_CMD_DHCP)
int do_dhcp (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
diff --git a/common/cmd_tsi148.c b/common/cmd_tsi148.c
index 1e83c88..6dc9dab 100644
--- a/common/cmd_tsi148.c
+++ b/common/cmd_tsi148.c
@@ -419,7 +419,7 @@ int do_tsi148(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
if (argc > 5)
vam = simple_strtoul(argv[5], NULL, 16);
if (argc > 6)
- vdw = simple_strtoul(argv[7], NULL, 16);
+ vdw = simple_strtoul(argv[6], NULL, 16);
switch (cmd) {
case 'c':
@@ -465,7 +465,7 @@ int do_tsi148(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
}
U_BOOT_CMD(
- tsi148, 8, 1, do_tsi148,
+ tsi148, 7, 1, do_tsi148,
"initialize and configure Turndra Tsi148\n",
"init\n"
" - initialize tsi148\n"
diff --git a/common/env_common.c b/common/env_common.c
index 88f068c..5acda4d 100644
--- a/common/env_common.c
+++ b/common/env_common.c
@@ -237,8 +237,8 @@ void env_relocate (void)
set_default_env(NULL);
#else
show_boot_progress (-60);
-#endif
set_default_env("!bad CRC");
+#endif
} else {
env_relocate_spec ();
}
diff --git a/common/fdt_support.c b/common/fdt_support.c
index 0ed6e77..b8a3dc9 100644
--- a/common/fdt_support.c
+++ b/common/fdt_support.c
@@ -667,6 +667,16 @@ int fdt_fixup_nor_flash_size(void *blob)
}
#endif
+int fdt_increase_size(void *fdt, int add_len)
+{
+ int newlen;
+
+ newlen = fdt_totalsize(fdt) + add_len;
+
+ /* Open in place with a new len */
+ return fdt_open_into(fdt, fdt, newlen);
+}
+
#ifdef CONFIG_FDT_FIXUP_PARTITIONS
#include <jffs2/load_kernel.h>
#include <mtd_node.h>
@@ -701,16 +711,6 @@ int fdt_del_subnodes(const void *blob, int parent_offset)
return 0;
}
-int fdt_increase_size(void *fdt, int add_len)
-{
- int newlen;
-
- newlen = fdt_totalsize(fdt) + add_len;
-
- /* Open in place with a new len */
- return fdt_open_into(fdt, fdt, newlen);
-}
-
int fdt_del_partitions(void *blob, int parent_offset)
{
const void *prop;
@@ -1189,3 +1189,32 @@ int fdt_alloc_phandle(void *blob)
return phandle + 1;
}
+
+#if defined(CONFIG_VIDEO)
+int fdt_add_edid(void *blob, const char *compat, unsigned char *edid_buf)
+{
+ int noff;
+ int ret;
+
+ noff = fdt_node_offset_by_compatible(blob, -1, compat);
+ if (noff != -FDT_ERR_NOTFOUND) {
+ debug("%s: %s\n", fdt_get_name(blob, noff, 0), compat);
+add_edid:
+ ret = fdt_setprop(blob, noff, "edid", edid_buf, 128);
+ if (ret == -FDT_ERR_NOSPACE) {
+ ret = fdt_increase_size(blob, 512);
+ if (!ret)
+ goto add_edid;
+ else
+ goto err_size;
+ } else if (ret < 0) {
+ printf("Can't add property: %s\n", fdt_strerror(ret));
+ return ret;
+ }
+ }
+ return 0;
+err_size:
+ printf("Can't increase blob size: %s\n", fdt_strerror(ret));
+ return ret;
+}
+#endif
diff --git a/common/usb_storage.c b/common/usb_storage.c
index 76949b8..613c4f0 100644
--- a/common/usb_storage.c
+++ b/common/usb_storage.c
@@ -204,6 +204,22 @@ int usb_stor_info(void)
return 1;
}
+static unsigned int usb_get_max_lun(struct us_data *us)
+{
+ int len;
+ unsigned char result;
+ len = usb_control_msg(us->pusb_dev,
+ usb_rcvctrlpipe(us->pusb_dev, 0),
+ US_BBB_GET_MAX_LUN,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
+ 0, us->ifnum,
+ &result, sizeof(result),
+ USB_CNTL_TIMEOUT * 5);
+ USB_STOR_PRINTF("Get Max LUN -> len = %i, result = %i\n",
+ len, (int) result);
+ return (len > 0) ? result : 0;
+}
+
/*******************************************************************************
* scan the usb and reports device info
* to the user if mode = 1
@@ -241,13 +257,22 @@ int usb_stor_scan(int mode)
break; /* no more devices avaiable */
if (usb_storage_probe(dev, 0, &usb_stor[usb_max_devs])) {
- /* ok, it is a storage devices
- * get info and fill it in
+ /* OK, it's a storage device. Iterate over its LUNs
+ * and populate `usb_dev_desc'.
*/
- if (usb_stor_get_info(dev, &usb_stor[usb_max_devs],
- &usb_dev_desc[usb_max_devs]) == 1)
+ int lun, max_lun, start = usb_max_devs;
+
+ max_lun = usb_get_max_lun(&usb_stor[usb_max_devs]);
+ for (lun = 0;
+ lun <= max_lun && usb_max_devs < USB_MAX_STOR_DEV;
+ lun++) {
+ usb_dev_desc[usb_max_devs].lun = lun;
+ if (usb_stor_get_info(dev, &usb_stor[start],
+ &usb_dev_desc[usb_max_devs]) == 1) {
usb_max_devs++;
}
+ }
+ }
/* if storage device */
if (usb_max_devs == USB_MAX_STOR_DEV) {
printf("max USB Storage Device reached: %d stopping\n",
@@ -882,6 +907,7 @@ static int usb_inquiry(ccb *srb, struct us_data *ss)
do {
memset(&srb->cmd[0], 0, 12);
srb->cmd[0] = SCSI_INQUIRY;
+ srb->cmd[1] = srb->lun << 5;
srb->cmd[4] = 36;
srb->datalen = 36;
srb->cmdlen = 12;
@@ -905,6 +931,7 @@ static int usb_request_sense(ccb *srb, struct us_data *ss)
ptr = (char *)srb->pdata;
memset(&srb->cmd[0], 0, 12);
srb->cmd[0] = SCSI_REQ_SENSE;
+ srb->cmd[1] = srb->lun << 5;
srb->cmd[4] = 18;
srb->datalen = 18;
srb->pdata = &srb->sense_buf[0];
@@ -924,6 +951,7 @@ static int usb_test_unit_ready(ccb *srb, struct us_data *ss)
do {
memset(&srb->cmd[0], 0, 12);
srb->cmd[0] = SCSI_TST_U_RDY;
+ srb->cmd[1] = srb->lun << 5;
srb->datalen = 0;
srb->cmdlen = 12;
if (ss->transport(srb, ss) == USB_STOR_TRANSPORT_GOOD)
@@ -943,6 +971,7 @@ static int usb_read_capacity(ccb *srb, struct us_data *ss)
do {
memset(&srb->cmd[0], 0, 12);
srb->cmd[0] = SCSI_RD_CAPAC;
+ srb->cmd[1] = srb->lun << 5;
srb->datalen = 8;
srb->cmdlen = 12;
if (ss->transport(srb, ss) == USB_STOR_TRANSPORT_GOOD)
@@ -957,6 +986,7 @@ static int usb_read_10(ccb *srb, struct us_data *ss, unsigned long start,
{
memset(&srb->cmd[0], 0, 12);
srb->cmd[0] = SCSI_READ10;
+ srb->cmd[1] = srb->lun << 5;
srb->cmd[2] = ((unsigned char) (start >> 24)) & 0xff;
srb->cmd[3] = ((unsigned char) (start >> 16)) & 0xff;
srb->cmd[4] = ((unsigned char) (start >> 8)) & 0xff;
@@ -973,6 +1003,7 @@ static int usb_write_10(ccb *srb, struct us_data *ss, unsigned long start,
{
memset(&srb->cmd[0], 0, 12);
srb->cmd[0] = SCSI_WRITE10;
+ srb->cmd[1] = srb->lun << 5;
srb->cmd[2] = ((unsigned char) (start >> 24)) & 0xff;
srb->cmd[3] = ((unsigned char) (start >> 16)) & 0xff;
srb->cmd[4] = ((unsigned char) (start >> 8)) & 0xff;
diff --git a/doc/README.LED_display b/doc/README.LED_display
new file mode 100644
index 0000000..521746e
--- /dev/null
+++ b/doc/README.LED_display
@@ -0,0 +1,27 @@
+LED display internal API
+=======================================
+
+This README describes the LED display API.
+
+The API is defined by the include file include/led-display.h
+
+The first step in to define CONFIG_CMD_DISPLAY in the board config file.
+Then you need to provide the following functions to access LED display:
+
+void display_set(int cmd);
+
+This function should control the state of the LED display. Argument is
+an ORed combination of the following values:
+ DISPLAY_CLEAR -- clear the display
+ DISPLAY_HOME -- set the position to the beginning of display
+ DISPLAY_MARK -- enable mark (decimal point), if implemented
+
+int display_putc(char c);
+
+This function should display it's parameter on the LED display in the
+current position. Returns the displayed character on success or -1 in
+case of failure.
+
+With this functions defined 'display' command will display it's
+arguments on the LED display (or clear the display if called without
+arguments).
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 4f15db9..5d668f8 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -33,6 +33,7 @@ COBJS-$(CONFIG_NS87308) += ns87308.o
COBJS-$(CONFIG_STATUS_LED) += status_led.o
COBJS-$(CONFIG_TWL4030_LED) += twl4030_led.o
COBJS-$(CONFIG_FSL_PMIC) += fsl_pmic.o
+COBJS-$(CONFIG_PDSP188x) += pdsp188x.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
diff --git a/drivers/misc/pdsp188x.c b/drivers/misc/pdsp188x.c
new file mode 100644
index 0000000..656b6ee
--- /dev/null
+++ b/drivers/misc/pdsp188x.c
@@ -0,0 +1,57 @@
+/*
+ * Copyright 2010 Sergey Poselenov, Emcraft Systems, <sposelenov@emcraft.com>
+ * Copyright 2010 Ilya Yanok, Emcraft Systems, <yanok@emcraft.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <common.h>
+#include <led-display.h>
+#include <asm/io.h>
+
+#ifdef CONFIG_CMD_DISPLAY
+#define CWORD_CLEAR 0x80
+#define CLEAR_DELAY (110 * 2)
+#define DISPLAY_SIZE 8
+
+static int pos; /* Current display position */
+
+/* Handle different display commands */
+void display_set(int cmd)
+{
+ if (cmd & DISPLAY_CLEAR) {
+ out_8((unsigned char *)CONFIG_SYS_DISP_CWORD, CWORD_CLEAR);
+ udelay(1000 * CLEAR_DELAY);
+ }
+
+ if (cmd & DISPLAY_HOME) {
+ pos = 0;
+ }
+}
+
+/*
+ * Display a character at the current display position.
+ * Characters beyond the display size are ignored.
+ */
+int display_putc(char c)
+{
+ if (pos >= DISPLAY_SIZE)
+ return -1;
+
+ out_8((unsigned char *)CONFIG_SYS_DISP_CHR_RAM + pos++, c);
+
+ return c;
+}
+#endif
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
index 02dd27f..798902f 100644
--- a/drivers/mtd/cfi_flash.c
+++ b/drivers/mtd/cfi_flash.c
@@ -2033,7 +2033,7 @@ unsigned long flash_init (void)
printf ("## Unknown FLASH on Bank %d "
"- Size = 0x%08lx = %ld MB\n",
i+1, flash_info[i].size,
- flash_info[i].size << 20);
+ flash_info[i].size >> 20);
#endif /* CONFIG_SYS_FLASH_QUIET_TEST */
}
#ifdef CONFIG_SYS_FLASH_PROTECTION
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index 6eb52ed..a195dda 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -142,3 +142,47 @@ void put_mtd_device(struct mtd_info *mtd)
c = --mtd->usecount;
BUG_ON(c < 0);
}
+
+#if defined(CONFIG_CMD_MTDPARTS_SPREAD)
+/**
+ * mtd_get_len_incl_bad
+ *
+ * Check if length including bad blocks fits into device.
+ *
+ * @param mtd an MTD device
+ * @param offset offset in flash
+ * @param length image length
+ * @return image length including bad blocks in *len_incl_bad and whether or not
+ * the length returned was truncated in *truncated
+ */
+void mtd_get_len_incl_bad(struct mtd_info *mtd, uint64_t offset,
+ const uint64_t length, uint64_t *len_incl_bad,
+ int *truncated)
+{
+ *truncated = 0;
+ *len_incl_bad = 0;
+
+ if (!mtd->block_isbad) {
+ *len_incl_bad = length;
+ return;
+ }
+
+ uint64_t len_excl_bad = 0;
+ uint64_t block_len;
+
+ while (len_excl_bad < length) {
+ if (offset >= mtd->size) {
+ *truncated = 1;
+ return;
+ }
+
+ block_len = mtd->erasesize - (offset & (mtd->erasesize - 1));
+
+ if (!mtd->block_isbad(mtd, offset & ~(mtd->erasesize - 1)))
+ len_excl_bad += block_len;
+
+ *len_incl_bad += block_len;
+ offset += block_len;
+ }
+}
+#endif /* defined(CONFIG_CMD_MTDPARTS_SPREAD) */
diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index e2e43ea..f647e43 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -230,18 +230,6 @@ static void part_sync(struct mtd_info *mtd)
part->master->sync(part->master);
}
-static int part_suspend(struct mtd_info *mtd)
-{
- struct mtd_part *part = PART(mtd);
- return part->master->suspend(part->master);
-}
-
-static void part_resume(struct mtd_info *mtd)
-{
- struct mtd_part *part = PART(mtd);
- part->master->resume(part->master);
-}
-
static int part_block_isbad(struct mtd_info *mtd, loff_t ofs)
{
struct mtd_part *part = PART(mtd);
@@ -339,10 +327,6 @@ static struct mtd_part *add_one_partition(struct mtd_info *master,
slave->mtd.get_fact_prot_info = part_get_fact_prot_info;
if (master->sync)
slave->mtd.sync = part_sync;
- if (!partno && master->suspend && master->resume) {
- slave->mtd.suspend = part_suspend;
- slave->mtd.resume = part_resume;
- }
if (master->lock)
slave->mtd.lock = part_lock;
if (master->unlock)
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 7d17846..21cc5a3 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -32,30 +32,6 @@
*
*/
-/* XXX U-BOOT XXX */
-#if 0
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/types.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/compatmac.h>
-#include <linux/interrupt.h>
-#include <linux/bitops.h>
-#include <linux/leds.h>
-#include <asm/io.h>
-
-#ifdef CONFIG_MTD_PARTITIONS
-#include <linux/mtd/partitions.h>
-#endif
-
-#endif
-
#include <common.h>
#define ENOTSUPP 524 /* Operation is not supported */
@@ -75,10 +51,6 @@
#include <asm/io.h>
#include <asm/errno.h>
-#ifdef CONFIG_JFFS2_NAND
-#include <jffs2/jffs2.h>
-#endif
-
/*
* CONFIG_SYS_NAND_RESET_CNT is used as a timeout mechanism when resetting
* a flash. NAND flash is initialized prior to interrupts so standard timers
@@ -143,44 +115,17 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
static int nand_wait(struct mtd_info *mtd, struct nand_chip *this);
-/*
- * For devices which display every fart in the system on a separate LED. Is
- * compiled away when LED support is disabled.
- */
-/* XXX U-BOOT XXX */
-#if 0
-DEFINE_LED_TRIGGER(nand_led_trigger);
-#endif
-
/**
* nand_release_device - [GENERIC] release chip
* @mtd: MTD device structure
*
* Deselect, release chip lock and wake up anyone waiting on the device
*/
-/* XXX U-BOOT XXX */
-#if 0
-static void nand_release_device(struct mtd_info *mtd)
-{
- struct nand_chip *chip = mtd->priv;
-
- /* De-select the NAND device */
- chip->select_chip(mtd, -1);
-
- /* Release the controller and the chip */
- spin_lock(&chip->controller->lock);
- chip->controller->active = NULL;
- chip->state = FL_READY;
- wake_up(&chip->controller->wq);
- spin_unlock(&chip->controller->lock);
-}
-#else
static void nand_release_device (struct mtd_info *mtd)
{
struct nand_chip *this = mtd->priv;
this->select_chip(mtd, -1); /* De-select the NAND device */
}
-#endif
/**
* nand_read_byte - [DEFAULT] read one byte from the chip
@@ -490,24 +435,6 @@ static int nand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int getchip,
* Wait for the ready pin, after a command
* The timeout is catched later.
*/
-/* XXX U-BOOT XXX */
-#if 0
-void nand_wait_ready(struct mtd_info *mtd)
-{
- struct nand_chip *chip = mtd->priv;
- unsigned long timeo = jiffies + 2;
-
- led_trigger_event(nand_led_trigger, LED_FULL);
- /* wait until command is processed or timeout occures */
- do {
- if (chip->dev_ready(mtd))
- break;
- touch_softlockup_watchdog();
- } while (time_before(jiffies, timeo));
- led_trigger_event(nand_led_trigger, LED_OFF);
-}
-EXPORT_SYMBOL_GPL(nand_wait_ready);
-#else
void nand_wait_ready(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
@@ -522,7 +449,6 @@ void nand_wait_ready(struct mtd_info *mtd)
break;
}
}
-#endif
/**
* nand_command - [DEFAULT] Send command to NAND device
@@ -759,45 +685,11 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
*
* Get the device and lock it for exclusive access
*/
-/* XXX U-BOOT XXX */
-#if 0
-static int
-nand_get_device(struct nand_chip *chip, struct mtd_info *mtd, int new_state)
-{
- spinlock_t *lock = &chip->controller->lock;
- wait_queue_head_t *wq = &chip->controller->wq;
- DECLARE_WAITQUEUE(wait, current);
- retry:
- spin_lock(lock);
-
- /* Hardware controller shared among independend devices */
- /* Hardware controller shared among independend devices */
- if (!chip->controller->active)
- chip->controller->active = chip;
-
- if (chip->controller->active == chip && chip->state == FL_READY) {
- chip->state = new_state;
- spin_unlock(lock);
- return 0;
- }
- if (new_state == FL_PM_SUSPENDED) {
- spin_unlock(lock);
- return (chip->state == FL_PM_SUSPENDED) ? 0 : -EAGAIN;
- }
- set_current_state(TASK_UNINTERRUPTIBLE);
- add_wait_queue(wq, &wait);
- spin_unlock(lock);
- schedule();
- remove_wait_queue(wq, &wait);
- goto retry;
-}
-#else
static int nand_get_device (struct nand_chip *this, struct mtd_info *mtd, int new_state)
{
this->state = new_state;
return 0;
}
-#endif
/**
* nand_wait - [DEFAULT] wait until the command is done
@@ -808,46 +700,6 @@ static int nand_get_device (struct nand_chip *this, struct mtd_info *mtd, int ne
* Erase can take up to 400ms and program up to 20ms according to
* general NAND and SmartMedia specs
*/
-/* XXX U-BOOT XXX */
-#if 0
-static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip)
-{
-
- unsigned long timeo = jiffies;
- int status, state = chip->state;
-
- if (state == FL_ERASING)
- timeo += (HZ * 400) / 1000;
- else
- timeo += (HZ * 20) / 1000;
-
- led_trigger_event(nand_led_trigger, LED_FULL);
-
- /* Apply this short delay always to ensure that we do wait tWB in
- * any case on any machine. */
- ndelay(100);
-
- if ((state == FL_ERASING) && (chip->options & NAND_IS_AND))
- chip->cmdfunc(mtd, NAND_CMD_STATUS_MULTI, -1, -1);
- else
- chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
-
- while (time_before(jiffies, timeo)) {
- if (chip->dev_ready) {
- if (chip->dev_ready(mtd))
- break;
- } else {
- if (chip->read_byte(mtd) & NAND_STATUS_READY)
- break;
- }
- cond_resched();
- }
- led_trigger_event(nand_led_trigger, LED_OFF);
-
- status = (int)chip->read_byte(mtd);
- return status;
-}
-#else
static int nand_wait(struct mtd_info *mtd, struct nand_chip *this)
{
unsigned long timeo;
@@ -886,7 +738,6 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *this)
return this->read_byte(mtd);
}
-#endif
/**
* nand_read_page_raw - [Intern] read raw page data without ecc
@@ -2001,13 +1852,6 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
if (!writelen)
return 0;
- /* reject writes, which are not page aligned */
- if (NOTALIGNED(to) || NOTALIGNED(ops->len)) {
- printk(KERN_NOTICE "nand_write: "
- "Attempt to write not page aligned data\n");
- return -EINVAL;
- }
-
column = to & (mtd->writesize - 1);
subpage = column || (writelen & (mtd->writesize - 1));
@@ -2523,32 +2367,6 @@ static int nand_block_markbad(struct mtd_info *mtd, loff_t ofs)
return chip->block_markbad(mtd, ofs);
}
-/**
- * nand_suspend - [MTD Interface] Suspend the NAND flash
- * @mtd: MTD device structure
- */
-static int nand_suspend(struct mtd_info *mtd)
-{
- struct nand_chip *chip = mtd->priv;
-
- return nand_get_device(chip, mtd, FL_PM_SUSPENDED);
-}
-
-/**
- * nand_resume - [MTD Interface] Resume the NAND flash
- * @mtd: MTD device structure
- */
-static void nand_resume(struct mtd_info *mtd)
-{
- struct nand_chip *chip = mtd->priv;
-
- if (chip->state == FL_PM_SUSPENDED)
- nand_release_device(mtd);
- else
- printk(KERN_ERR "nand_resume() called for a chip which is not "
- "in suspended state\n");
-}
-
/*
* Set default functions
*/
@@ -2584,17 +2402,8 @@ static void nand_set_defaults(struct nand_chip *chip, int busw)
chip->verify_buf = busw ? nand_verify_buf16 : nand_verify_buf;
if (!chip->scan_bbt)
chip->scan_bbt = nand_default_bbt;
-
- if (!chip->controller) {
+ if (!chip->controller)
chip->controller = &chip->hwcontrol;
-
- /* XXX U-BOOT XXX */
-#if 0
- spin_lock_init(&chip->controller->lock);
- init_waitqueue_head(&chip->controller->wq);
-#endif
- }
-
}
/*
@@ -3028,8 +2837,6 @@ int nand_scan_tail(struct mtd_info *mtd)
mtd->sync = nand_sync;
mtd->lock = NULL;
mtd->unlock = NULL;
- mtd->suspend = nand_suspend;
- mtd->resume = nand_resume;
mtd->block_isbad = nand_block_isbad;
mtd->block_markbad = nand_block_markbad;
@@ -3043,16 +2850,6 @@ int nand_scan_tail(struct mtd_info *mtd)
return 0;
}
-/* module_text_address() isn't exported, and it's mostly a pointless
- test if this is a module _anyway_ -- they'd have to try _really_ hard
- to call us from in-kernel code if the core NAND support is modular. */
-#ifdef MODULE
-#define caller_is_module() (1)
-#else
-#define caller_is_module() \
- module_text_address((unsigned long)__builtin_return_address(0))
-#endif
-
/**
* nand_scan - [NAND Interface] Scan for the NAND device
* @mtd: MTD device structure
@@ -3069,15 +2866,6 @@ int nand_scan(struct mtd_info *mtd, int maxchips)
{
int ret;
- /* Many callers got this wrong, so check for it for a while... */
- /* XXX U-BOOT XXX */
-#if 0
- if (!mtd->owner && caller_is_module()) {
- printk(KERN_CRIT "nand_scan() called with NULL mtd->owner!\n");
- BUG();
- }
-#endif
-
ret = nand_scan_ident(mtd, maxchips);
if (!ret)
ret = nand_scan_tail(mtd);
@@ -3096,40 +2884,9 @@ void nand_release(struct mtd_info *mtd)
/* Deregister partitions */
del_mtd_partitions(mtd);
#endif
- /* Deregister the device */
- /* XXX U-BOOT XXX */
-#if 0
- del_mtd_device(mtd);
-#endif
/* Free bad block table memory */
kfree(chip->bbt);
if (!(chip->options & NAND_OWN_BUFFERS))
kfree(chip->buffers);
}
-
-/* XXX U-BOOT XXX */
-#if 0
-EXPORT_SYMBOL_GPL(nand_scan);
-EXPORT_SYMBOL_GPL(nand_scan_ident);
-EXPORT_SYMBOL_GPL(nand_scan_tail);
-EXPORT_SYMBOL_GPL(nand_release);
-
-static int __init nand_base_init(void)
-{
- led_trigger_register_simple("nand-disk", &nand_led_trigger);
- return 0;
-}
-
-static void __exit nand_base_exit(void)
-{
- led_trigger_unregister_simple(nand_led_trigger);
-}
-
-module_init(nand_base_init);
-module_exit(nand_base_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Steven J. Hill <sjhill@realitydiluted.com>, Thomas Gleixner <tglx@linutronix.de>");
-MODULE_DESCRIPTION("Generic NAND flash driver code");
-#endif
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index 2fe68ab..521ddde 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -58,19 +58,6 @@
#include <asm/errno.h>
-/* XXX U-BOOT XXX */
-#if 0
-#include <linux/slab.h>
-#include <linux/types.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/compatmac.h>
-#include <linux/bitops.h>
-#include <linux/delay.h>
-#include <linux/vmalloc.h>
-#endif
-
/**
* check_pattern - [GENERIC] check if a pattern is in the buffer
* @buf: the buffer to search
@@ -1231,9 +1218,3 @@ int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt)
}
return 1;
}
-
-/* XXX U-BOOT XXX */
-#if 0
-EXPORT_SYMBOL(nand_scan_bbt);
-EXPORT_SYMBOL(nand_default_bbt);
-#endif
diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c
index 463f9cb..52bc916 100644
--- a/drivers/mtd/nand/nand_ecc.c
+++ b/drivers/mtd/nand/nand_ecc.c
@@ -37,14 +37,6 @@
#include <common.h>
-/* XXX U-BOOT XXX */
-#if 0
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/mtd/nand_ecc.h>
-#endif
-
#include <asm/errno.h>
#include <linux/mtd/mtd.h>
@@ -140,10 +132,6 @@ int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
return 0;
}
-/* XXX U-BOOT XXX */
-#if 0
-EXPORT_SYMBOL(nand_calculate_ecc);
-#endif
#endif /* CONFIG_NAND_SPL */
static inline int countbits(uint32_t byte)
@@ -212,8 +200,3 @@ int nand_correct_data(struct mtd_info *mtd, u_char *dat,
return -EBADMSG;
}
-
-/* XXX U-BOOT XXX */
-#if 0
-EXPORT_SYMBOL(nand_correct_data);
-#endif
diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c
index 29c42f7..22c7411 100644
--- a/drivers/mtd/nand/nand_util.c
+++ b/drivers/mtd/nand/nand_util.c
@@ -28,6 +28,12 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
+ * Copyright 2010 Freescale Semiconductor
+ * The portions of this file whose copyright is held by Freescale and which
+ * are not considered a derived work of GPL v2-only code may be distributed
+ * and/or modified under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
*/
#include <common.h>
@@ -69,7 +75,7 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts)
{
struct jffs2_unknown_node cleanmarker;
erase_info_t erase;
- ulong erase_length;
+ unsigned long erase_length, erased_length; /* in blocks */
int bbtest = 1;
int result;
int percent_complete = -1;
@@ -78,13 +84,19 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts)
struct mtd_oob_ops oob_opts;
struct nand_chip *chip = meminfo->priv;
+ if ((opts->offset & (meminfo->writesize - 1)) != 0) {
+ printf("Attempt to erase non page aligned data\n");
+ return -1;
+ }
+
memset(&erase, 0, sizeof(erase));
memset(&oob_opts, 0, sizeof(oob_opts));
erase.mtd = meminfo;
erase.len = meminfo->erasesize;
erase.addr = opts->offset;
- erase_length = opts->length;
+ erase_length = lldiv(opts->length + meminfo->erasesize - 1,
+ meminfo->erasesize);
cleanmarker.magic = cpu_to_je16 (JFFS2_MAGIC_BITMASK);
cleanmarker.nodetype = cpu_to_je16 (JFFS2_NODETYPE_CLEANMARKER);
@@ -108,15 +120,8 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts)
priv_nand->bbt = NULL;
}
- if (erase_length < meminfo->erasesize) {
- printf("Warning: Erase size 0x%08lx smaller than one " \
- "erase block 0x%08x\n",erase_length, meminfo->erasesize);
- printf(" Erasing 0x%08x instead\n", meminfo->erasesize);
- erase_length = meminfo->erasesize;
- }
-
- for (;
- erase.addr < opts->offset + erase_length;
+ for (erased_length = 0;
+ erased_length < erase_length;
erase.addr += meminfo->erasesize) {
WATCHDOG_RESET ();
@@ -129,6 +134,10 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts)
"0x%08llx "
" \n",
erase.addr);
+
+ if (!opts->spread)
+ erased_length++;
+
continue;
} else if (ret < 0) {
@@ -139,6 +148,8 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts)
}
}
+ erased_length++;
+
result = meminfo->erase(meminfo, &erase);
if (result != 0) {
printf("\n%s: MTD Erase failure: %d\n",
@@ -165,9 +176,7 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts)
}
if (!opts->quiet) {
- unsigned long long n =(unsigned long long)
- (erase.addr + meminfo->erasesize - opts->offset)
- * 100;
+ unsigned long long n = erased_length * 100ULL;
int percent;
do_div(n, erase_length);
@@ -202,41 +211,6 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts)
return 0;
}
-/* XXX U-BOOT XXX */
-#if 0
-
-#define MAX_PAGE_SIZE 2048
-#define MAX_OOB_SIZE 64
-
-/*
- * buffer array used for writing data
- */
-static unsigned char data_buf[MAX_PAGE_SIZE];
-static unsigned char oob_buf[MAX_OOB_SIZE];
-
-/* OOB layouts to pass into the kernel as default */
-static struct nand_ecclayout none_ecclayout = {
- .useecc = MTD_NANDECC_OFF,
-};
-
-static struct nand_ecclayout jffs2_ecclayout = {
- .useecc = MTD_NANDECC_PLACE,
- .eccbytes = 6,
- .eccpos = { 0, 1, 2, 3, 6, 7 }
-};
-
-static struct nand_ecclayout yaffs_ecclayout = {
- .useecc = MTD_NANDECC_PLACE,
- .eccbytes = 6,
- .eccpos = { 8, 9, 10, 13, 14, 15}
-};
-
-static struct nand_ecclayout autoplace_ecclayout = {
- .useecc = MTD_NANDECC_AUTOPLACE
-};
-#endif
-
-/* XXX U-BOOT XXX */
#ifdef CONFIG_CMD_NAND_LOCK_UNLOCK
/******************************************************************************
@@ -423,36 +397,43 @@ int nand_unlock(struct mtd_info *mtd, ulong start, ulong length)
#endif
/**
- * get_len_incl_bad
+ * check_skip_len
*
- * Check if length including bad blocks fits into device.
+ * Check if there are any bad blocks, and whether length including bad
+ * blocks fits into device
*
* @param nand NAND device
* @param offset offset in flash
* @param length image length
- * @return image length including bad blocks
+ * @return 0 if the image fits and there are no bad blocks
+ * 1 if the image fits, but there are bad blocks
+ * -1 if the image does not fit
*/
-static size_t get_len_incl_bad (nand_info_t *nand, loff_t offset,
- const size_t length)
+static int check_skip_len(nand_info_t *nand, loff_t offset, size_t length)
{
- size_t len_incl_bad = 0;
size_t len_excl_bad = 0;
- size_t block_len;
+ int ret = 0;
while (len_excl_bad < length) {
- block_len = nand->erasesize - (offset & (nand->erasesize - 1));
+ size_t block_len, block_off;
+ loff_t block_start;
- if (!nand_block_isbad (nand, offset & ~(nand->erasesize - 1)))
- len_excl_bad += block_len;
+ if (offset >= nand->size)
+ return -1;
- len_incl_bad += block_len;
- offset += block_len;
+ block_start = offset & ~(loff_t)(nand->erasesize - 1);
+ block_off = offset & (nand->erasesize - 1);
+ block_len = nand->erasesize - block_off;
- if (offset >= nand->size)
- break;
+ if (!nand_block_isbad(nand, block_start))
+ len_excl_bad += block_len;
+ else
+ ret = 1;
+
+ offset += block_len;
}
- return len_incl_bad;
+ return ret;
}
/**
@@ -474,29 +455,41 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
{
int rval;
size_t left_to_write = *length;
- size_t len_incl_bad;
u_char *p_buffer = buffer;
+ int need_skip;
- /* Reject writes, which are not page aligned */
- if ((offset & (nand->writesize - 1)) != 0 ||
- (*length & (nand->writesize - 1)) != 0) {
+ /*
+ * nand_write() handles unaligned, partial page writes.
+ *
+ * We allow length to be unaligned, for convenience in
+ * using the $filesize variable.
+ *
+ * However, starting at an unaligned offset makes the
+ * semantics of bad block skipping ambiguous (really,
+ * you should only start a block skipping access at a
+ * partition boundary). So don't try to handle that.
+ */
+ if ((offset & (nand->writesize - 1)) != 0) {
printf ("Attempt to write non page aligned data\n");
+ *length = 0;
return -EINVAL;
}
- len_incl_bad = get_len_incl_bad (nand, offset, *length);
-
- if ((offset + len_incl_bad) > nand->size) {
+ need_skip = check_skip_len(nand, offset, *length);
+ if (need_skip < 0) {
printf ("Attempt to write outside the flash area\n");
+ *length = 0;
return -EINVAL;
}
- if (len_incl_bad == *length) {
+ if (!need_skip) {
rval = nand_write (nand, offset, length, buffer);
- if (rval != 0)
- printf ("NAND write to offset %llx failed %d\n",
- offset, rval);
+ if (rval == 0)
+ return 0;
+ *length = 0;
+ printf ("NAND write to offset %llx failed %d\n",
+ offset, rval);
return rval;
}
@@ -553,20 +546,28 @@ int nand_read_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
{
int rval;
size_t left_to_read = *length;
- size_t len_incl_bad;
u_char *p_buffer = buffer;
+ int need_skip;
- len_incl_bad = get_len_incl_bad (nand, offset, *length);
+ if ((offset & (nand->writesize - 1)) != 0) {
+ printf ("Attempt to read non page aligned data\n");
+ *length = 0;
+ return -EINVAL;
+ }
- if ((offset + len_incl_bad) > nand->size) {
+ need_skip = check_skip_len(nand, offset, *length);
+ if (need_skip < 0) {
printf ("Attempt to read outside the flash area\n");
+ *length = 0;
return -EINVAL;
}
- if (len_incl_bad == *length) {
+ if (!need_skip) {
rval = nand_read (nand, offset, length, buffer);
if (!rval || rval == -EUCLEAN)
return 0;
+
+ *length = 0;
printf ("NAND read from offset %llx failed %d\n",
offset, rval);
return rval;
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index f9273ab..24e02c2 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -2213,6 +2213,7 @@ char *onenand_print_device_info(int device, int version)
}
static const struct onenand_manufacturers onenand_manuf_ids[] = {
+ {ONENAND_MFR_NUMONYX, "Numonyx"},
{ONENAND_MFR_SAMSUNG, "Samsung"},
};
diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c
index ea875dc..b4ba1dd 100644
--- a/drivers/mtd/spi/spi_flash.c
+++ b/drivers/mtd/spi/spi_flash.c
@@ -2,6 +2,8 @@
* SPI flash interface
*
* Copyright (C) 2008 Atmel Corporation
+ * Copyright (C) 2010 Reinhard Meyer, EMK Elektronik
+ *
* Licensed under the GPL-2 or later.
*/
@@ -96,13 +98,68 @@ int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd,
return ret;
}
+/*
+ * The following table holds all device probe functions
+ *
+ * shift: number of continuation bytes before the ID
+ * idcode: the expected IDCODE or 0xff for non JEDEC devices
+ * probe: the function to call
+ *
+ * Non JEDEC devices should be ordered in the table such that
+ * the probe functions with best detection algorithms come first.
+ *
+ * Several matching entries are permitted, they will be tried
+ * in sequence until a probe function returns non NULL.
+ *
+ * IDCODE_CONT_LEN may be redefined if a device needs to declare a
+ * larger "shift" value. IDCODE_PART_LEN generally shouldn't be
+ * changed. This is the max number of bytes probe functions may
+ * examine when looking up part-specific identification info.
+ *
+ * Probe functions will be given the idcode buffer starting at their
+ * manu id byte (the "idcode" in the table below). In other words,
+ * all of the continuation bytes will be skipped (the "shift" below).
+ */
+#define IDCODE_CONT_LEN 0
+#define IDCODE_PART_LEN 5
+static const struct {
+ const u8 shift;
+ const u8 idcode;
+ struct spi_flash *(*probe) (struct spi_slave *spi, u8 *idcode);
+} flashes[] = {
+ /* Keep it sorted by define name */
+#ifdef CONFIG_SPI_FLASH_ATMEL
+ { 0, 0x1f, spi_flash_probe_atmel, },
+#endif
+#ifdef CONFIG_SPI_FLASH_MACRONIX
+ { 0, 0xc2, spi_flash_probe_macronix, },
+#endif
+#ifdef CONFIG_SPI_FLASH_SPANSION
+ { 0, 0x01, spi_flash_probe_spansion, },
+#endif
+#ifdef CONFIG_SPI_FLASH_SST
+ { 0, 0xbf, spi_flash_probe_sst, },
+#endif
+#ifdef CONFIG_SPI_FLASH_STMICRO
+ { 0, 0x20, spi_flash_probe_stmicro, },
+#endif
+#ifdef CONFIG_SPI_FLASH_WINBOND
+ { 0, 0xef, spi_flash_probe_winbond, },
+#endif
+ /* Keep it sorted by best detection */
+#ifdef CONFIG_SPI_FLASH_STMICRO
+ { 0, 0xff, spi_flash_probe_stmicro, },
+#endif
+};
+#define IDCODE_LEN (IDCODE_CONT_LEN + IDCODE_PART_LEN)
+
struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
unsigned int max_hz, unsigned int spi_mode)
{
struct spi_slave *spi;
- struct spi_flash *flash;
- int ret;
- u8 idcode[5];
+ struct spi_flash *flash = NULL;
+ int ret, i, shift;
+ u8 idcode[IDCODE_LEN], *idp;
spi = spi_setup_slave(bus, cs, max_hz, spi_mode);
if (!spi) {
@@ -117,53 +174,34 @@ struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
}
/* Read the ID codes */
- ret = spi_flash_cmd(spi, CMD_READ_ID, &idcode, sizeof(idcode));
+ ret = spi_flash_cmd(spi, CMD_READ_ID, idcode, sizeof(idcode));
if (ret)
goto err_read_id;
- debug("SF: Got idcode %02x %02x %02x %02x %02x\n", idcode[0],
- idcode[1], idcode[2], idcode[3], idcode[4]);
-
- switch (idcode[0]) {
-#ifdef CONFIG_SPI_FLASH_SPANSION
- case 0x01:
- flash = spi_flash_probe_spansion(spi, idcode);
- break;
+#ifdef DEBUG
+ printf("SF: Got idcodes\n");
+ print_buffer(0, idcode, 1, sizeof(idcode), 0);
#endif
-#ifdef CONFIG_SPI_FLASH_ATMEL
- case 0x1F:
- flash = spi_flash_probe_atmel(spi, idcode);
- break;
-#endif
-#ifdef CONFIG_SPI_FLASH_MACRONIX
- case 0xc2:
- flash = spi_flash_probe_macronix(spi, idcode);
- break;
-#endif
-#ifdef CONFIG_SPI_FLASH_WINBOND
- case 0xef:
- flash = spi_flash_probe_winbond(spi, idcode);
- break;
-#endif
-#ifdef CONFIG_SPI_FLASH_STMICRO
- case 0x20:
- case 0xff: /* Let the stmicro func handle non-JEDEC ids */
- flash = spi_flash_probe_stmicro(spi, idcode);
- break;
-#endif
-#ifdef CONFIG_SPI_FLASH_SST
- case 0xBF:
- flash = spi_flash_probe_sst(spi, idcode);
- break;
-#endif
- default:
- printf("SF: Unsupported manufacturer %02X\n", idcode[0]);
- flash = NULL;
- break;
- }
- if (!flash)
+ /* count the number of continuation bytes */
+ for (shift = 0, idp = idcode;
+ shift < IDCODE_CONT_LEN && *idp == 0x7f;
+ ++shift, ++idp)
+ continue;
+
+ /* search the table for matches in shift and id */
+ for (i = 0; i < ARRAY_SIZE(flashes); ++i)
+ if (flashes[i].shift == shift && flashes[i].idcode == *idp) {
+ /* we have a match, call probe */
+ flash = flashes[i].probe(spi, idp);
+ if (flash)
+ break;
+ }
+
+ if (!flash) {
+ printf("SF: Unsupported manufacturer %02x\n", *idp);
goto err_manufacturer_probe;
+ }
spi_release_bus(spi);
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 218eeff..79eb66b 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -40,6 +40,7 @@ COBJS-$(CONFIG_DNET) += dnet.o
COBJS-$(CONFIG_E1000) += e1000.o
COBJS-$(CONFIG_EEPRO100) += eepro100.o
COBJS-$(CONFIG_ENC28J60) += enc28j60.o
+COBJS-$(CONFIG_ENC28J60_LPC2292) += enc28j60_lpc2292.o
COBJS-$(CONFIG_EP93XX) += ep93xx_eth.o
COBJS-$(CONFIG_ETHOC) += ethoc.o
COBJS-$(CONFIG_FEC_MXC) += fec_mxc.o
diff --git a/drivers/net/at91_emac.c b/drivers/net/at91_emac.c
index ca2b16b..4e5685c 100644
--- a/drivers/net/at91_emac.c
+++ b/drivers/net/at91_emac.c
@@ -220,7 +220,7 @@ static int at91emac_phy_reset(struct eth_device *netdev)
at91emac_write(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, MII_BMCR,
(BMCR_ANENABLE | BMCR_ANRESTART));
- for (i = 0; i < 100000 / 100; i++) {
+ for (i = 0; i < 30000; i++) {
at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR,
MII_BMSR, &status);
if (status & BMSR_ANEGCOMPLETE)
@@ -233,7 +233,7 @@ static int at91emac_phy_reset(struct eth_device *netdev)
} else {
printf("%s: Autonegotiation timed out (status=0x%04x)\n",
netdev->name, status);
- return 1;
+ return -1;
}
return 0;
}
@@ -252,7 +252,7 @@ static int at91emac_phy_init(struct eth_device *netdev)
MII_PHYSID1, &phy_id);
if (phy_id == 0xffff) {
printf("%s: No PHY present\n", netdev->name);
- return 1;
+ return -1;
}
at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR,
@@ -261,7 +261,7 @@ static int at91emac_phy_init(struct eth_device *netdev)
if (!(status & BMSR_LSTATUS)) {
/* Try to re-negotiate if we don't have link already. */
if (at91emac_phy_reset(netdev))
- return 2;
+ return -2;
for (i = 0; i < 100000 / 100; i++) {
at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR,
@@ -273,7 +273,7 @@ static int at91emac_phy_init(struct eth_device *netdev)
}
if (!(status & BMSR_LSTATUS)) {
VERBOSEP("%s: link down\n", netdev->name);
- return 3;
+ return -3;
} else {
at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR,
MII_ADVERTISE, &adv);
@@ -298,7 +298,7 @@ int at91emac_UpdateLinkSpeed(at91_emac_t *emac)
at91emac_read(emac, CONFIG_DRIVER_AT91EMAC_PHYADDR, MII_BMSR, &stat1);
if (!(stat1 & BMSR_LSTATUS)) /* link status up? */
- return 1;
+ return -1;
if (stat1 & BMSR_100FULL) {
/*set Emac for 100BaseTX and Full Duplex */
@@ -333,7 +333,7 @@ int at91emac_UpdateLinkSpeed(at91_emac_t *emac)
&emac->cfg);
return 0;
}
- return 1;
+ return 0;
}
static int at91emac_init(struct eth_device *netdev, bd_t *bd)
@@ -399,7 +399,7 @@ static int at91emac_init(struct eth_device *netdev, bd_t *bd)
at91emac_UpdateLinkSpeed(emac);
return 0;
}
- return 1;
+ return -1;
}
static void at91emac_halt(struct eth_device *netdev)
@@ -501,11 +501,11 @@ int at91emac_register(bd_t *bis, unsigned long iobase)
iobase = AT91_EMAC_BASE;
emac = malloc(sizeof(*emac)+512);
if (emac == NULL)
- return 1;
+ return -1;
dev = malloc(sizeof(*dev));
if (dev == NULL) {
free(emac);
- return 1;
+ return -1;
}
/* alignment as per Errata (64 bytes) is insufficient! */
emacfix = (emac_device *) (((unsigned long) emac + 0x1ff) & 0xFFFFFE00);
diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index 41a9910..e06896f 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -65,21 +65,6 @@ void eth_mdio_enable(void)
davinci_eth_mdio_enable();
}
-static u_int8_t davinci_eth_mac_addr[] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
-
-/*
- * This function must be called before emac_open() if you want to override
- * the default mac address.
- */
-void davinci_eth_set_mac_addr(const u_int8_t *addr)
-{
- int i;
-
- for (i = 0; i < sizeof (davinci_eth_mac_addr); i++) {
- davinci_eth_mac_addr[i] = addr[i];
- }
-}
-
/* EMAC Addresses */
static volatile emac_regs *adap_emac = (emac_regs *)EMAC_BASE_ADDR;
static volatile ewrap_regs *adap_ewrap = (ewrap_regs *)EMAC_WRAPPER_BASE_ADDR;
@@ -100,6 +85,43 @@ static volatile u_int8_t active_phy_addr = 0xff;
phy_t phy;
+static int davinci_eth_set_mac_addr(struct eth_device *dev)
+{
+ unsigned long mac_hi;
+ unsigned long mac_lo;
+
+ /*
+ * Set MAC Addresses & Init multicast Hash to 0 (disable any multicast
+ * receive)
+ * Using channel 0 only - other channels are disabled
+ * */
+ writel(0, &adap_emac->MACINDEX);
+ mac_hi = (dev->enetaddr[3] << 24) |
+ (dev->enetaddr[2] << 16) |
+ (dev->enetaddr[1] << 8) |
+ (dev->enetaddr[0]);
+ mac_lo = (dev->enetaddr[5] << 8) |
+ (dev->enetaddr[4]);
+
+ writel(mac_hi, &adap_emac->MACADDRHI);
+#if defined(DAVINCI_EMAC_VERSION2)
+ writel(mac_lo | EMAC_MAC_ADDR_IS_VALID | EMAC_MAC_ADDR_MATCH,
+ &adap_emac->MACADDRLO);
+#else
+ writel(mac_lo, &adap_emac->MACADDRLO);
+#endif
+
+ writel(0, &adap_emac->MACHASH1);
+ writel(0, &adap_emac->MACHASH2);
+
+ /* Set source MAC address - REQUIRED */
+ writel(mac_hi, &adap_emac->MACSRCADDRHI);
+ writel(mac_lo, &adap_emac->MACSRCADDRLO);
+
+
+ return 0;
+}
+
static void davinci_eth_mdio_enable(void)
{
u_int32_t clkdiv;
@@ -286,8 +308,6 @@ static int davinci_eth_open(struct eth_device *dev, bd_t *bis)
dv_reg_p addr;
u_int32_t clkdiv, cnt;
volatile emac_desc *rx_desc;
- unsigned long mac_hi;
- unsigned long mac_lo;
debug_emac("+ emac_open\n");
@@ -311,30 +331,7 @@ static int davinci_eth_open(struct eth_device *dev, bd_t *bis)
writel(1, &adap_emac->TXCONTROL);
writel(1, &adap_emac->RXCONTROL);
- /* Set MAC Addresses & Init multicast Hash to 0 (disable any multicast receive) */
- /* Using channel 0 only - other channels are disabled */
- writel(0, &adap_emac->MACINDEX);
- mac_hi = (davinci_eth_mac_addr[3] << 24) |
- (davinci_eth_mac_addr[2] << 16) |
- (davinci_eth_mac_addr[1] << 8) |
- (davinci_eth_mac_addr[0]);
- mac_lo = (davinci_eth_mac_addr[5] << 8) |
- (davinci_eth_mac_addr[4]);
-
- writel(mac_hi, &adap_emac->MACADDRHI);
-#if defined(DAVINCI_EMAC_VERSION2)
- writel(mac_lo | EMAC_MAC_ADDR_IS_VALID | EMAC_MAC_ADDR_MATCH,
- &adap_emac->MACADDRLO);
-#else
- writel(mac_lo, &adap_emac->MACADDRLO);
-#endif
-
- writel(0, &adap_emac->MACHASH1);
- writel(0, &adap_emac->MACHASH2);
-
- /* Set source MAC address - REQUIRED */
- writel(mac_hi, &adap_emac->MACSRCADDRHI);
- writel(mac_lo, &adap_emac->MACSRCADDRLO);
+ davinci_eth_set_mac_addr(dev);
/* Set DMA 8 TX / 8 RX Head pointers to 0 */
addr = &adap_emac->TX0HDP;
@@ -636,6 +633,7 @@ int davinci_emac_initialize(void)
dev->halt = davinci_eth_close;
dev->send = davinci_eth_send_packet;
dev->recv = davinci_eth_rcv_packet;
+ dev->write_hwaddr = davinci_eth_set_mac_addr;
eth_register(dev);
diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c
index 3238a50..6c161b6 100644
--- a/drivers/net/enc28j60.c
+++ b/drivers/net/enc28j60.c
@@ -1,4 +1,9 @@
/*
+ * (C) Copyright 2010
+ * Reinhard Meyer, EMK Elektronik, reinhard.meyer@emk-elektronik.de
+ * Martin Krause, Martin.Krause@tqs.de
+ * reworked original enc28j60.c
+ *
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
@@ -6,7 +11,7 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
@@ -15,968 +20,959 @@
* MA 02111-1307 USA
*/
-#include <config.h>
#include <common.h>
#include <net.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/spi.h>
-
-/*
- * Control Registers in Bank 0
- */
-
-#define CTL_REG_ERDPTL 0x00
-#define CTL_REG_ERDPTH 0x01
-#define CTL_REG_EWRPTL 0x02
-#define CTL_REG_EWRPTH 0x03
-#define CTL_REG_ETXSTL 0x04
-#define CTL_REG_ETXSTH 0x05
-#define CTL_REG_ETXNDL 0x06
-#define CTL_REG_ETXNDH 0x07
-#define CTL_REG_ERXSTL 0x08
-#define CTL_REG_ERXSTH 0x09
-#define CTL_REG_ERXNDL 0x0A
-#define CTL_REG_ERXNDH 0x0B
-#define CTL_REG_ERXRDPTL 0x0C
-#define CTL_REG_ERXRDPTH 0x0D
-#define CTL_REG_ERXWRPTL 0x0E
-#define CTL_REG_ERXWRPTH 0x0F
-#define CTL_REG_EDMASTL 0x10
-#define CTL_REG_EDMASTH 0x11
-#define CTL_REG_EDMANDL 0x12
-#define CTL_REG_EDMANDH 0x13
-#define CTL_REG_EDMADSTL 0x14
-#define CTL_REG_EDMADSTH 0x15
-#define CTL_REG_EDMACSL 0x16
-#define CTL_REG_EDMACSH 0x17
-/* these are common in all banks */
-#define CTL_REG_EIE 0x1B
-#define CTL_REG_EIR 0x1C
-#define CTL_REG_ESTAT 0x1D
-#define CTL_REG_ECON2 0x1E
-#define CTL_REG_ECON1 0x1F
-
-/*
- * Control Registers in Bank 1
- */
-
-#define CTL_REG_EHT0 0x00
-#define CTL_REG_EHT1 0x01
-#define CTL_REG_EHT2 0x02
-#define CTL_REG_EHT3 0x03
-#define CTL_REG_EHT4 0x04
-#define CTL_REG_EHT5 0x05
-#define CTL_REG_EHT6 0x06
-#define CTL_REG_EHT7 0x07
-#define CTL_REG_EPMM0 0x08
-#define CTL_REG_EPMM1 0x09
-#define CTL_REG_EPMM2 0x0A
-#define CTL_REG_EPMM3 0x0B
-#define CTL_REG_EPMM4 0x0C
-#define CTL_REG_EPMM5 0x0D
-#define CTL_REG_EPMM6 0x0E
-#define CTL_REG_EPMM7 0x0F
-#define CTL_REG_EPMCSL 0x10
-#define CTL_REG_EPMCSH 0x11
-#define CTL_REG_EPMOL 0x14
-#define CTL_REG_EPMOH 0x15
-#define CTL_REG_EWOLIE 0x16
-#define CTL_REG_EWOLIR 0x17
-#define CTL_REG_ERXFCON 0x18
-#define CTL_REG_EPKTCNT 0x19
-
-/*
- * Control Registers in Bank 2
- */
-
-#define CTL_REG_MACON1 0x00
-#define CTL_REG_MACON2 0x01
-#define CTL_REG_MACON3 0x02
-#define CTL_REG_MACON4 0x03
-#define CTL_REG_MABBIPG 0x04
-#define CTL_REG_MAIPGL 0x06
-#define CTL_REG_MAIPGH 0x07
-#define CTL_REG_MACLCON1 0x08
-#define CTL_REG_MACLCON2 0x09
-#define CTL_REG_MAMXFLL 0x0A
-#define CTL_REG_MAMXFLH 0x0B
-#define CTL_REG_MAPHSUP 0x0D
-#define CTL_REG_MICON 0x11
-#define CTL_REG_MICMD 0x12
-#define CTL_REG_MIREGADR 0x14
-#define CTL_REG_MIWRL 0x16
-#define CTL_REG_MIWRH 0x17
-#define CTL_REG_MIRDL 0x18
-#define CTL_REG_MIRDH 0x19
-
-/*
- * Control Registers in Bank 3
- */
-
-#define CTL_REG_MAADR1 0x00
-#define CTL_REG_MAADR0 0x01
-#define CTL_REG_MAADR3 0x02
-#define CTL_REG_MAADR2 0x03
-#define CTL_REG_MAADR5 0x04
-#define CTL_REG_MAADR4 0x05
-#define CTL_REG_EBSTSD 0x06
-#define CTL_REG_EBSTCON 0x07
-#define CTL_REG_EBSTCSL 0x08
-#define CTL_REG_EBSTCSH 0x09
-#define CTL_REG_MISTAT 0x0A
-#define CTL_REG_EREVID 0x12
-#define CTL_REG_ECOCON 0x15
-#define CTL_REG_EFLOCON 0x17
-#define CTL_REG_EPAUSL 0x18
-#define CTL_REG_EPAUSH 0x19
-
-
-/*
- * PHY Register
- */
-
-#define PHY_REG_PHID1 0x02
-#define PHY_REG_PHID2 0x03
-/* taken from the Linux driver */
-#define PHY_REG_PHCON1 0x00
-#define PHY_REG_PHCON2 0x10
-#define PHY_REG_PHLCON 0x14
-
-/*
- * Receive Filter Register (ERXFCON) bits
- */
-
-#define ENC_RFR_UCEN 0x80
-#define ENC_RFR_ANDOR 0x40
-#define ENC_RFR_CRCEN 0x20
-#define ENC_RFR_PMEN 0x10
-#define ENC_RFR_MPEN 0x08
-#define ENC_RFR_HTEN 0x04
-#define ENC_RFR_MCEN 0x02
-#define ENC_RFR_BCEN 0x01
+#include <spi.h>
+#include <malloc.h>
+#include <netdev.h>
+#include <miiphy.h>
+#include "enc28j60.h"
/*
- * ECON1 Register Bits
+ * IMPORTANT: spi_claim_bus() and spi_release_bus()
+ * are called at begin and end of each of the following functions:
+ * enc_miiphy_read(), enc_miiphy_write(), enc_write_hwaddr(),
+ * enc_init(), enc_recv(), enc_send(), enc_halt()
+ * ALL other functions assume that the bus has already been claimed!
+ * Since NetReceive() might call enc_send() in return, the bus must be
+ * released, NetReceive() called and claimed again.
*/
-#define ENC_ECON1_TXRST 0x80
-#define ENC_ECON1_RXRST 0x40
-#define ENC_ECON1_DMAST 0x20
-#define ENC_ECON1_CSUMEN 0x10
-#define ENC_ECON1_TXRTS 0x08
-#define ENC_ECON1_RXEN 0x04
-#define ENC_ECON1_BSEL1 0x02
-#define ENC_ECON1_BSEL0 0x01
-
/*
- * ECON2 Register Bits
+ * Controller memory layout.
+ * We only allow 1 frame for transmission and reserve the rest
+ * for reception to handle as many broadcast packets as possible.
+ * Also use the memory from 0x0000 for receiver buffer. See errata pt. 5
+ * 0x0000 - 0x19ff 6656 bytes receive buffer
+ * 0x1a00 - 0x1fff 1536 bytes transmit buffer =
+ * control(1)+frame(1518)+status(7)+reserve(10).
*/
-#define ENC_ECON2_AUTOINC 0x80
-#define ENC_ECON2_PKTDEC 0x40
-#define ENC_ECON2_PWRSV 0x20
-#define ENC_ECON2_VRPS 0x08
+#define ENC_RX_BUF_START 0x0000
+#define ENC_RX_BUF_END 0x19ff
+#define ENC_TX_BUF_START 0x1a00
+#define ENC_TX_BUF_END 0x1fff
+#define ENC_MAX_FRM_LEN 1518
+#define RX_RESET_COUNTER 1000
/*
- * EIR Register Bits
+ * For non data transfer functions, like phy read/write, set hwaddr, init
+ * we do not need a full, time consuming init including link ready wait.
+ * This enum helps to bring the chip through the minimum necessary inits.
*/
-#define ENC_EIR_PKTIF 0x40
-#define ENC_EIR_DMAIF 0x20
-#define ENC_EIR_LINKIF 0x10
-#define ENC_EIR_TXIF 0x08
-#define ENC_EIR_WOLIF 0x04
-#define ENC_EIR_TXERIF 0x02
-#define ENC_EIR_RXERIF 0x01
+enum enc_initstate {none=0, setupdone, linkready};
+typedef struct enc_device {
+ struct eth_device *dev; /* back pointer */
+ struct spi_slave *slave;
+ int rx_reset_counter;
+ u16 next_pointer;
+ u8 bank; /* current bank in enc28j60 */
+ enum enc_initstate initstate;
+} enc_dev_t;
/*
- * ESTAT Register Bits
+ * enc_bset: set bits in a common register
+ * enc_bclr: clear bits in a common register
+ *
+ * making the reg parameter u8 will give a compile time warning if the
+ * functions are called with a register not accessible in all Banks
*/
+static void enc_bset(enc_dev_t *enc, const u8 reg, const u8 data)
+{
+ u8 dout[2];
-#define ENC_ESTAT_INT 0x80
-#define ENC_ESTAT_LATECOL 0x10
-#define ENC_ESTAT_RXBUSY 0x04
-#define ENC_ESTAT_TXABRT 0x02
-#define ENC_ESTAT_CLKRDY 0x01
+ dout[0] = CMD_BFS(reg);
+ dout[1] = data;
+ spi_xfer(enc->slave, 2 * 8, dout, NULL,
+ SPI_XFER_BEGIN | SPI_XFER_END);
+}
-/*
- * EIE Register Bits
- */
+static void enc_bclr(enc_dev_t *enc, const u8 reg, const u8 data)
+{
+ u8 dout[2];
-#define ENC_EIE_INTIE 0x80
-#define ENC_EIE_PKTIE 0x40
-#define ENC_EIE_DMAIE 0x20
-#define ENC_EIE_LINKIE 0x10
-#define ENC_EIE_TXIE 0x08
-#define ENC_EIE_WOLIE 0x04
-#define ENC_EIE_TXERIE 0x02
-#define ENC_EIE_RXERIE 0x01
+ dout[0] = CMD_BFC(reg);
+ dout[1] = data;
+ spi_xfer(enc->slave, 2 * 8, dout, NULL,
+ SPI_XFER_BEGIN | SPI_XFER_END);
+}
/*
- * MACON1 Register Bits
+ * high byte of the register contains bank number:
+ * 0: no bank switch necessary
+ * 1: switch to bank 0
+ * 2: switch to bank 1
+ * 3: switch to bank 2
+ * 4: switch to bank 3
*/
-#define ENC_MACON1_LOOPBK 0x10
-#define ENC_MACON1_TXPAUS 0x08
-#define ENC_MACON1_RXPAUS 0x04
-#define ENC_MACON1_PASSALL 0x02
-#define ENC_MACON1_MARXEN 0x01
-
+static void enc_set_bank(enc_dev_t *enc, const u16 reg)
+{
+ u8 newbank = reg >> 8;
+
+ if (newbank == 0 || newbank == enc->bank)
+ return;
+ switch (newbank) {
+ case 1:
+ enc_bclr(enc, CTL_REG_ECON1,
+ ENC_ECON1_BSEL0 | ENC_ECON1_BSEL1);
+ break;
+ case 2:
+ enc_bset(enc, CTL_REG_ECON1, ENC_ECON1_BSEL0);
+ enc_bclr(enc, CTL_REG_ECON1, ENC_ECON1_BSEL1);
+ break;
+ case 3:
+ enc_bclr(enc, CTL_REG_ECON1, ENC_ECON1_BSEL0);
+ enc_bset(enc, CTL_REG_ECON1, ENC_ECON1_BSEL1);
+ break;
+ case 4:
+ enc_bset(enc, CTL_REG_ECON1,
+ ENC_ECON1_BSEL0 | ENC_ECON1_BSEL1);
+ break;
+ }
+ enc->bank = newbank;
+}
/*
- * MACON2 Register Bits
+ * local functions to access SPI
+ *
+ * reg: register inside ENC28J60
+ * data: 8/16 bits to write
+ * c: number of retries
+ *
+ * enc_r8: read 8 bits
+ * enc_r16: read 16 bits
+ * enc_w8: write 8 bits
+ * enc_w16: write 16 bits
+ * enc_w8_retry: write 8 bits, verify and retry
+ * enc_rbuf: read from ENC28J60 into buffer
+ * enc_wbuf: write from buffer into ENC28J60
*/
-#define ENC_MACON2_MARST 0x80
-#define ENC_MACON2_RNDRST 0x40
-#define ENC_MACON2_MARXRST 0x08
-#define ENC_MACON2_RFUNRST 0x04
-#define ENC_MACON2_MATXRST 0x02
-#define ENC_MACON2_TFUNRST 0x01
/*
- * MACON3 Register Bits
+ * MAC and MII registers need a 3 byte SPI transfer to read,
+ * all other registers need a 2 byte SPI transfer.
*/
-#define ENC_MACON3_PADCFG2 0x80
-#define ENC_MACON3_PADCFG1 0x40
-#define ENC_MACON3_PADCFG0 0x20
-#define ENC_MACON3_TXCRCEN 0x10
-#define ENC_MACON3_PHDRLEN 0x08
-#define ENC_MACON3_HFRMEN 0x04
-#define ENC_MACON3_FRMLNEN 0x02
-#define ENC_MACON3_FULDPX 0x01
+static int enc_reg2nbytes(const u16 reg)
+{
+ /* check if MAC or MII register */
+ return ((reg >= CTL_REG_MACON1 && reg <= CTL_REG_MIRDH) ||
+ (reg >= CTL_REG_MAADR1 && reg <= CTL_REG_MAADR4) ||
+ (reg == CTL_REG_MISTAT)) ? 3 : 2;
+}
/*
- * MICMD Register Bits
+ * Read a byte register
*/
-#define ENC_MICMD_MIISCAN 0x02
-#define ENC_MICMD_MIIRD 0x01
+static u8 enc_r8(enc_dev_t *enc, const u16 reg)
+{
+ u8 dout[3];
+ u8 din[3];
+ int nbytes = enc_reg2nbytes(reg);
+
+ enc_set_bank(enc, reg);
+ dout[0] = CMD_RCR(reg);
+ spi_xfer(enc->slave, nbytes * 8, dout, din,
+ SPI_XFER_BEGIN | SPI_XFER_END);
+ return din[nbytes-1];
+}
/*
- * MISTAT Register Bits
+ * Read a L/H register pair and return a word.
+ * Must be called with the L register's address.
*/
-#define ENC_MISTAT_NVALID 0x04
-#define ENC_MISTAT_SCAN 0x02
-#define ENC_MISTAT_BUSY 0x01
+static u16 enc_r16(enc_dev_t *enc, const u16 reg)
+{
+ u8 dout[3];
+ u8 din[3];
+ u16 result;
+ int nbytes = enc_reg2nbytes(reg);
+
+ enc_set_bank(enc, reg);
+ dout[0] = CMD_RCR(reg);
+ spi_xfer(enc->slave, nbytes * 8, dout, din,
+ SPI_XFER_BEGIN | SPI_XFER_END);
+ result = din[nbytes-1];
+ dout[0]++; /* next register */
+ spi_xfer(enc->slave, nbytes * 8, dout, din,
+ SPI_XFER_BEGIN | SPI_XFER_END);
+ result |= din[nbytes-1] << 8;
+ return result;
+}
/*
- * PHID1 and PHID2 values
+ * Write a byte register
*/
-#define ENC_PHID1_VALUE 0x0083
-#define ENC_PHID2_VALUE 0x1400
-#define ENC_PHID2_MASK 0xFC00
-
-
-#define ENC_SPI_SLAVE_CS 0x00010000 /* pin P1.16 */
-#define ENC_RESET 0x00020000 /* pin P1.17 */
+static void enc_w8(enc_dev_t *enc, const u16 reg, const u8 data)
+{
+ u8 dout[2];
-#define FAILSAFE_VALUE 5000
+ enc_set_bank(enc, reg);
+ dout[0] = CMD_WCR(reg);
+ dout[1] = data;
+ spi_xfer(enc->slave, 2 * 8, dout, NULL,
+ SPI_XFER_BEGIN | SPI_XFER_END);
+}
/*
- * Controller memory layout:
- *
- * 0x0000 - 0x17ff 6k bytes receive buffer
- * 0x1800 - 0x1fff 2k bytes transmit buffer
- */
-/* Use the lower memory for receiver buffer. See errata pt. 5 */
-#define ENC_RX_BUF_START 0x0000
-#define ENC_TX_BUF_START 0x1800
-/* taken from the Linux driver */
-#define ENC_RX_BUF_END 0x17ff
-#define ENC_TX_BUF_END 0x1fff
-
-/* maximum frame length */
-#define ENC_MAX_FRM_LEN 1518
-
-#define enc_enable() PUT32(IO1CLR, ENC_SPI_SLAVE_CS)
-#define enc_disable() PUT32(IO1SET, ENC_SPI_SLAVE_CS)
-#define enc_cfg_spi() spi_set_cfg(0, 0, 0); spi_set_clock(8);
-
-
-static unsigned char encReadReg (unsigned char regNo);
-static void encWriteReg (unsigned char regNo, unsigned char data);
-static void encWriteRegRetry (unsigned char regNo, unsigned char data, int c);
-static void encReadBuff (unsigned short length, unsigned char *pBuff);
-static void encWriteBuff (unsigned short length, unsigned char *pBuff);
-static void encBitSet (unsigned char regNo, unsigned char data);
-static void encBitClr (unsigned char regNo, unsigned char data);
-static void encReset (void);
-static void encInit (unsigned char *pEthAddr);
-static unsigned short phyRead (unsigned char addr);
-static void phyWrite(unsigned char, unsigned short);
-static void encPoll (void);
-static void encRx (void);
-
-#define m_nic_read(reg) encReadReg(reg)
-#define m_nic_write(reg, data) encWriteReg(reg, data)
-#define m_nic_write_retry(reg, data, count) encWriteRegRetry(reg, data, count)
-#define m_nic_read_data(len, buf) encReadBuff((len), (buf))
-#define m_nic_write_data(len, buf) encWriteBuff((len), (buf))
-
-/* bit field set */
-#define m_nic_bfs(reg, data) encBitSet(reg, data)
-
-/* bit field clear */
-#define m_nic_bfc(reg, data) encBitClr(reg, data)
-
-static unsigned char bank = 0; /* current bank in enc28j60 */
-static unsigned char next_pointer_lsb;
-static unsigned char next_pointer_msb;
-
-static unsigned char buffer[ENC_MAX_FRM_LEN];
-static int rxResetCounter = 0;
-
-#define RX_RESET_COUNTER 1000;
-
-/*-----------------------------------------------------------------------------
- * Always returns 0
+ * Write a L/H register pair.
+ * Must be called with the L register's address.
*/
-int eth_init (bd_t * bis)
+static void enc_w16(enc_dev_t *enc, const u16 reg, const u16 data)
{
- unsigned char estatVal;
- uchar enetaddr[6];
-
- /* configure GPIO */
- (*((volatile unsigned long *) IO1DIR)) |= ENC_SPI_SLAVE_CS;
- (*((volatile unsigned long *) IO1DIR)) |= ENC_RESET;
-
- /* CS and RESET active low */
- PUT32 (IO1SET, ENC_SPI_SLAVE_CS);
- PUT32 (IO1SET, ENC_RESET);
-
- spi_init ();
-
- /* taken from the Linux driver - dangerous stuff here! */
- /* Wait for CLKRDY to become set (i.e., check that we can communicate with
- the ENC) */
- do
- {
- estatVal = m_nic_read(CTL_REG_ESTAT);
- } while ((estatVal & 0x08) || (~estatVal & ENC_ESTAT_CLKRDY));
-
- /* initialize controller */
- encReset ();
- eth_getenv_enetaddr("ethaddr", enetaddr);
- encInit (enetaddr);
-
- m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_RXEN); /* enable receive */
-
- return 0;
+ u8 dout[2];
+
+ enc_set_bank(enc, reg);
+ dout[0] = CMD_WCR(reg);
+ dout[1] = data;
+ spi_xfer(enc->slave, 2 * 8, dout, NULL,
+ SPI_XFER_BEGIN | SPI_XFER_END);
+ dout[0]++; /* next register */
+ dout[1] = data >> 8;
+ spi_xfer(enc->slave, 2 * 8, dout, NULL,
+ SPI_XFER_BEGIN | SPI_XFER_END);
}
-int eth_send (volatile void *packet, int length)
+/*
+ * Write a byte register, verify and retry
+ */
+static void enc_w8_retry(enc_dev_t *enc, const u16 reg, const u8 data, const int c)
{
- /* check frame length, etc. */
- /* TODO: */
-
- /* switch to bank 0 */
- m_nic_bfc (CTL_REG_ECON1, (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0));
-
- /* set EWRPT */
- m_nic_write (CTL_REG_EWRPTL, (ENC_TX_BUF_START & 0xff));
- m_nic_write (CTL_REG_EWRPTH, (ENC_TX_BUF_START >> 8));
-
- /* set ETXND */
- m_nic_write (CTL_REG_ETXNDL, (length + ENC_TX_BUF_START) & 0xFF);
- m_nic_write (CTL_REG_ETXNDH, (length + ENC_TX_BUF_START) >> 8);
-
- /* set ETXST */
- m_nic_write (CTL_REG_ETXSTL, ENC_TX_BUF_START & 0xFF);
- m_nic_write (CTL_REG_ETXSTH, ENC_TX_BUF_START >> 8);
-
- /* write packet */
- m_nic_write_data (length, (unsigned char *) packet);
+ u8 dout[2];
+ u8 readback;
+ int i;
- /* taken from the Linux driver */
- /* Verify that the internal transmit logic has not been altered by excessive
- collisions. See Errata B4 12 and 14.
- */
- if (m_nic_read(CTL_REG_EIR) & ENC_EIR_TXERIF) {
- m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_TXRST);
- m_nic_bfc(CTL_REG_ECON1, ENC_ECON1_TXRST);
+ enc_set_bank(enc, reg);
+ for (i = 0; i < c; i++) {
+ dout[0] = CMD_WCR(reg);
+ dout[1] = data;
+ spi_xfer(enc->slave, 2 * 8, dout, NULL,
+ SPI_XFER_BEGIN | SPI_XFER_END);
+ readback = enc_r8(enc, reg);
+ if (readback == data)
+ break;
+ /* wait 1ms */
+ udelay(1000);
+ }
+ if (i == c) {
+ printf("%s: write reg 0x%03x failed\n", enc->dev->name, reg);
}
- m_nic_bfc(CTL_REG_EIR, (ENC_EIR_TXERIF | ENC_EIR_TXIF));
-
- /* set ECON1.TXRTS */
- m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_TXRTS);
-
- return 0;
}
-
-/*****************************************************************************
- * This function resets the receiver only. This function may be called from
- * interrupt-context.
+/*
+ * Read ENC RAM into buffer
*/
-static void encReceiverReset (void)
+static void enc_rbuf(enc_dev_t *enc, const u16 length, u8 *buf)
{
- unsigned char econ1;
-
- econ1 = m_nic_read (CTL_REG_ECON1);
- if ((econ1 & ENC_ECON1_RXRST) == 0) {
- m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_RXRST);
- rxResetCounter = RX_RESET_COUNTER;
- }
+ u8 dout[1];
+
+ dout[0] = CMD_RBM;
+ spi_xfer(enc->slave, 8, dout, NULL, SPI_XFER_BEGIN);
+ spi_xfer(enc->slave, length * 8, NULL, buf, SPI_XFER_END);
+#ifdef DEBUG
+ puts("Rx:\n");
+ print_buffer(0, buf, 1, length, 0);
+#endif
}
-/*****************************************************************************
- * receiver reset timer
+/*
+ * Write buffer into ENC RAM
*/
-static void encReceiverResetCallback (void)
+static void enc_wbuf(enc_dev_t *enc, const u16 length, const u8 *buf, const u8 control)
{
- m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_RXRST);
- m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_RXEN); /* enable receive */
+ u8 dout[2];
+ dout[0] = CMD_WBM;
+ dout[1] = control;
+ spi_xfer(enc->slave, 2 * 8, dout, NULL, SPI_XFER_BEGIN);
+ spi_xfer(enc->slave, length * 8, buf, NULL, SPI_XFER_END);
+#ifdef DEBUG
+ puts("Tx:\n");
+ print_buffer(0, buf, 1, length, 0);
+#endif
}
-/*-----------------------------------------------------------------------------
- * Check for received packets. Call NetReceive for each packet. The return
- * value is ignored by the caller.
+/*
+ * Try to claim the SPI bus.
+ * Print error message on failure.
*/
-int eth_rx (void)
+static int enc_claim_bus(enc_dev_t *enc)
{
- if (rxResetCounter > 0 && --rxResetCounter == 0) {
- encReceiverResetCallback ();
- }
-
- encPoll ();
-
- return 0;
+ int rc = spi_claim_bus(enc->slave);
+ if (rc)
+ printf("%s: failed to claim SPI bus\n", enc->dev->name);
+ return rc;
}
-void eth_halt (void)
+/*
+ * Release previously claimed SPI bus.
+ * This function is mainly for symmetry to enc_claim_bus().
+ * Let the toolchain decide to inline it...
+ */
+static void enc_release_bus(enc_dev_t *enc)
{
- m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_RXEN); /* disable receive */
+ spi_release_bus(enc->slave);
}
-/*****************************************************************************/
-
-static void encPoll (void)
+/*
+ * Read PHY register
+ */
+static u16 phy_read(enc_dev_t *enc, const u8 addr)
{
- unsigned char eir_reg;
- volatile unsigned char estat_reg;
- unsigned char pkt_cnt;
+ uint64_t etime;
+ u8 status;
-#ifdef CONFIG_USE_IRQ
- /* clear global interrupt enable bit in enc28j60 */
- m_nic_bfc (CTL_REG_EIE, ENC_EIE_INTIE);
-#endif
- estat_reg = m_nic_read (CTL_REG_ESTAT);
-
- eir_reg = m_nic_read (CTL_REG_EIR);
-
- if (eir_reg & ENC_EIR_TXIF) {
- /* clear TXIF bit in EIR */
- m_nic_bfc (CTL_REG_EIR, ENC_EIR_TXIF);
+ enc_w8(enc, CTL_REG_MIREGADR, addr);
+ enc_w8(enc, CTL_REG_MICMD, ENC_MICMD_MIIRD);
+ /* 1 second timeout - only happens on hardware problem */
+ etime = get_ticks() + get_tbclk();
+ /* poll MISTAT.BUSY bit until operation is complete */
+ do
+ {
+ status = enc_r8(enc, CTL_REG_MISTAT);
+ } while (get_ticks() <= etime && (status & ENC_MISTAT_BUSY));
+ if (status & ENC_MISTAT_BUSY) {
+ printf("%s: timeout reading phy\n", enc->dev->name);
+ return 0;
}
+ enc_w8(enc, CTL_REG_MICMD, 0);
+ return enc_r16(enc, CTL_REG_MIRDL);
+}
- /* We have to use pktcnt and not pktif bit, see errata pt. 6 */
+/*
+ * Write PHY register
+ */
+static void phy_write(enc_dev_t *enc, const u8 addr, const u16 data)
+{
+ uint64_t etime;
+ u8 status;
- /* move to bank 1 */
- m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL1);
- m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL0);
+ enc_w8(enc, CTL_REG_MIREGADR, addr);
+ enc_w16(enc, CTL_REG_MIWRL, data);
+ /* 1 second timeout - only happens on hardware problem */
+ etime = get_ticks() + get_tbclk();
+ /* poll MISTAT.BUSY bit until operation is complete */
+ do
+ {
+ status = enc_r8(enc, CTL_REG_MISTAT);
+ } while (get_ticks() <= etime && (status & ENC_MISTAT_BUSY));
+ if (status & ENC_MISTAT_BUSY) {
+ printf("%s: timeout writing phy\n", enc->dev->name);
+ return;
+ }
+}
- /* read pktcnt */
- pkt_cnt = m_nic_read (CTL_REG_EPKTCNT);
+/*
+ * Verify link status, wait if necessary
+ *
+ * Note: with a 10 MBit/s only PHY there is no autonegotiation possible,
+ * half/full duplex is a pure setup matter. For the time being, this driver
+ * will setup in half duplex mode only.
+ */
+static int enc_phy_link_wait(enc_dev_t *enc)
+{
+ u16 status;
+ int duplex;
+ uint64_t etime;
+
+#ifdef CONFIG_ENC_SILENTLINK
+ /* check if we have a link, then just return */
+ status = phy_read(enc, PHY_REG_PHSTAT1);
+ if (status & ENC_PHSTAT1_LLSTAT)
+ return 0;
+#endif
- if (pkt_cnt > 0) {
- if ((eir_reg & ENC_EIR_PKTIF) == 0) {
- /*printf("encPoll: pkt cnt > 0, but pktif not set\n"); */
+ /* wait for link with 1 second timeout */
+ etime = get_ticks() + get_tbclk();
+ while (get_ticks() <= etime) {
+ status = phy_read(enc, PHY_REG_PHSTAT1);
+ if (status & ENC_PHSTAT1_LLSTAT) {
+ /* now we have a link */
+ status = phy_read(enc, PHY_REG_PHSTAT2);
+ duplex = (status & ENC_PHSTAT2_DPXSTAT) ? 1 : 0;
+ printf("%s: link up, 10Mbps %s-duplex\n",
+ enc->dev->name, duplex ? "full" : "half");
+ return 0;
}
- encRx ();
- /* clear PKTIF bit in EIR, this should not need to be done but it
- seems like we get problems if we do not */
- m_nic_bfc (CTL_REG_EIR, ENC_EIR_PKTIF);
+ udelay(1000);
}
- if (eir_reg & ENC_EIR_RXERIF) {
- printf ("encPoll: rx error\n");
- m_nic_bfc (CTL_REG_EIR, ENC_EIR_RXERIF);
- }
- if (eir_reg & ENC_EIR_TXERIF) {
- printf ("encPoll: tx error\n");
- m_nic_bfc (CTL_REG_EIR, ENC_EIR_TXERIF);
- }
-
-#ifdef CONFIG_USE_IRQ
- /* set global interrupt enable bit in enc28j60 */
- m_nic_bfs (CTL_REG_EIE, ENC_EIE_INTIE);
-#endif
+ /* timeout occured */
+ printf("%s: link down\n", enc->dev->name);
+ return 1;
}
-static void encRx (void)
+/*
+ * This function resets the receiver only.
+ */
+static void enc_reset_rx(enc_dev_t *enc)
{
- unsigned short pkt_len;
- unsigned short copy_len;
- unsigned short status;
- unsigned char eir_reg;
- unsigned char pkt_cnt = 0;
- unsigned short rxbuf_rdpt;
+ u8 econ1;
- /* switch to bank 0 */
- m_nic_bfc (CTL_REG_ECON1, (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0));
+ econ1 = enc_r8(enc, CTL_REG_ECON1);
+ if ((econ1 & ENC_ECON1_RXRST) == 0) {
+ enc_bset(enc, CTL_REG_ECON1, ENC_ECON1_RXRST);
+ enc->rx_reset_counter = RX_RESET_COUNTER;
+ }
+}
- m_nic_write (CTL_REG_ERDPTL, next_pointer_lsb);
- m_nic_write (CTL_REG_ERDPTH, next_pointer_msb);
+/*
+ * Reset receiver and reenable it.
+ */
+static void enc_reset_rx_call(enc_dev_t *enc)
+{
+ enc_bclr(enc, CTL_REG_ECON1, ENC_ECON1_RXRST);
+ enc_bset(enc, CTL_REG_ECON1, ENC_ECON1_RXEN);
+}
+/*
+ * Copy a packet from the receive ring and forward it to
+ * the protocol stack.
+ */
+static void enc_receive(enc_dev_t *enc)
+{
+ u8 *packet = (u8 *)NetRxPackets[0];
+ u16 pkt_len;
+ u16 copy_len;
+ u16 status;
+ u8 eir_reg;
+ u8 pkt_cnt = 0;
+ u16 rxbuf_rdpt;
+ u8 hbuf[6];
+
+ enc_w16(enc, CTL_REG_ERDPTL, enc->next_pointer);
do {
- m_nic_read_data (6, buffer);
- next_pointer_lsb = buffer[0];
- next_pointer_msb = buffer[1];
- pkt_len = buffer[2];
- pkt_len |= (unsigned short) buffer[3] << 8;
- status = buffer[4];
- status |= (unsigned short) buffer[5] << 8;
-
+ enc_rbuf(enc, 6, hbuf);
+ enc->next_pointer = hbuf[0] | (hbuf[1] << 8);
+ pkt_len = hbuf[2] | (hbuf[3] << 8);
+ status = hbuf[4] | (hbuf[5] << 8);
+ debug("next_pointer=$%04x pkt_len=%u status=$%04x\n",
+ enc->next_pointer, pkt_len, status);
if (pkt_len <= ENC_MAX_FRM_LEN)
copy_len = pkt_len;
else
copy_len = 0;
-
if ((status & (1L << 7)) == 0) /* check Received Ok bit */
copy_len = 0;
-
- /* taken from the Linux driver */
/* check if next pointer is resonable */
- if ((((unsigned int)next_pointer_msb << 8) |
- (unsigned int)next_pointer_lsb) >= ENC_TX_BUF_START)
+ if (enc->next_pointer >= ENC_TX_BUF_START)
copy_len = 0;
-
if (copy_len > 0) {
- m_nic_read_data (copy_len, buffer);
+ enc_rbuf(enc, copy_len, packet);
}
-
/* advance read pointer to next pointer */
- m_nic_write (CTL_REG_ERDPTL, next_pointer_lsb);
- m_nic_write (CTL_REG_ERDPTH, next_pointer_msb);
-
+ enc_w16(enc, CTL_REG_ERDPTL, enc->next_pointer);
/* decrease packet counter */
- m_nic_bfs (CTL_REG_ECON2, ENC_ECON2_PKTDEC);
-
- /* taken from the Linux driver */
- /* Only odd values should be written to ERXRDPTL,
+ enc_bset(enc, CTL_REG_ECON2, ENC_ECON2_PKTDEC);
+ /*
+ * Only odd values should be written to ERXRDPTL,
* see errata B4 pt.13
*/
- rxbuf_rdpt = (next_pointer_msb << 8 | next_pointer_lsb) - 1;
- if ((rxbuf_rdpt < (m_nic_read(CTL_REG_ERXSTH) << 8 |
- m_nic_read(CTL_REG_ERXSTL))) || (rxbuf_rdpt >
- (m_nic_read(CTL_REG_ERXNDH) << 8 |
- m_nic_read(CTL_REG_ERXNDL)))) {
- m_nic_write(CTL_REG_ERXRDPTL, m_nic_read(CTL_REG_ERXNDL));
- m_nic_write(CTL_REG_ERXRDPTH, m_nic_read(CTL_REG_ERXNDH));
+ rxbuf_rdpt = enc->next_pointer - 1;
+ if ((rxbuf_rdpt < enc_r16(enc, CTL_REG_ERXSTL)) ||
+ (rxbuf_rdpt > enc_r16(enc, CTL_REG_ERXNDL))) {
+ enc_w16(enc, CTL_REG_ERXRDPTL,
+ enc_r16(enc, CTL_REG_ERXNDL));
} else {
- m_nic_write(CTL_REG_ERXRDPTL, rxbuf_rdpt & 0xFF);
- m_nic_write(CTL_REG_ERXRDPTH, rxbuf_rdpt >> 8);
+ enc_w16(enc, CTL_REG_ERXRDPTL, rxbuf_rdpt);
}
-
- /* move to bank 1 */
- m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL1);
- m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL0);
-
/* read pktcnt */
- pkt_cnt = m_nic_read (CTL_REG_EPKTCNT);
-
- /* switch to bank 0 */
- m_nic_bfc (CTL_REG_ECON1,
- (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0));
-
+ pkt_cnt = enc_r8(enc, CTL_REG_EPKTCNT);
if (copy_len == 0) {
- eir_reg = m_nic_read (CTL_REG_EIR);
- encReceiverReset ();
- printf ("eth_rx: copy_len=0\n");
+ eir_reg = enc_r8(enc, CTL_REG_EIR);
+ enc_reset_rx(enc);
+ printf("%s: receive copy_len=0\n", enc->dev->name);
continue;
}
-
- NetReceive ((unsigned char *) buffer, pkt_len);
-
- eir_reg = m_nic_read (CTL_REG_EIR);
- } while (pkt_cnt); /* Use EPKTCNT not EIR.PKTIF flag, see errata pt. 6 */
-}
-
-static void encWriteReg (unsigned char regNo, unsigned char data)
-{
- spi_lock ();
- enc_cfg_spi ();
- enc_enable ();
-
- spi_write (0x40 | regNo); /* write in regNo */
- spi_write (data);
-
- enc_disable ();
- enc_enable ();
-
- spi_write (0x1f); /* write reg 0x1f */
-
- enc_disable ();
- spi_unlock ();
+ /*
+ * Because NetReceive() might call enc_send(), we need to
+ * release the SPI bus, call NetReceive(), reclaim the bus
+ */
+ enc_release_bus(enc);
+ NetReceive(packet, pkt_len);
+ if (enc_claim_bus(enc))
+ return;
+ eir_reg = enc_r8(enc, CTL_REG_EIR);
+ } while (pkt_cnt);
+ /* Use EPKTCNT not EIR.PKTIF flag, see errata pt. 6 */
}
-static void encWriteRegRetry (unsigned char regNo, unsigned char data, int c)
+/*
+ * Poll for completely received packets.
+ */
+static void enc_poll(enc_dev_t *enc)
{
- unsigned char readback;
- int i;
-
- spi_lock ();
+ u8 eir_reg;
+ u8 estat_reg;
+ u8 pkt_cnt;
- for (i = 0; i < c; i++) {
- enc_cfg_spi ();
- enc_enable ();
-
- spi_write (0x40 | regNo); /* write in regNo */
- spi_write (data);
-
- enc_disable ();
- enc_enable ();
-
- spi_write (0x1f); /* write reg 0x1f */
-
- enc_disable ();
-
- spi_unlock (); /* we must unlock spi first */
-
- readback = encReadReg (regNo);
-
- spi_lock ();
-
- if (readback == data)
- break;
+#ifdef CONFIG_USE_IRQ
+ /* clear global interrupt enable bit in enc28j60 */
+ enc_bclr(enc, CTL_REG_EIE, ENC_EIE_INTIE);
+#endif
+ estat_reg = enc_r8(enc, CTL_REG_ESTAT);
+ eir_reg = enc_r8(enc, CTL_REG_EIR);
+ if (eir_reg & ENC_EIR_TXIF) {
+ /* clear TXIF bit in EIR */
+ enc_bclr(enc, CTL_REG_EIR, ENC_EIR_TXIF);
}
- spi_unlock ();
-
- if (i == c) {
- printf ("enc28j60: write reg %d failed\n", regNo);
+ /* We have to use pktcnt and not pktif bit, see errata pt. 6 */
+ pkt_cnt = enc_r8(enc, CTL_REG_EPKTCNT);
+ if (pkt_cnt > 0) {
+ if ((eir_reg & ENC_EIR_PKTIF) == 0) {
+ debug("enc_poll: pkt cnt > 0, but pktif not set\n");
+ }
+ enc_receive(enc);
+ /*
+ * clear PKTIF bit in EIR, this should not need to be done
+ * but it seems like we get problems if we do not
+ */
+ enc_bclr(enc, CTL_REG_EIR, ENC_EIR_PKTIF);
}
-}
-
-static unsigned char encReadReg (unsigned char regNo)
-{
- unsigned char rxByte;
-
- spi_lock ();
- enc_cfg_spi ();
- enc_enable ();
-
- spi_write (0x1f); /* read reg 0x1f */
-
- bank = spi_read () & 0x3;
-
- enc_disable ();
- enc_enable ();
-
- spi_write (regNo);
- rxByte = spi_read ();
-
- /* check if MAC or MII register */
- if (((bank == 2) && (regNo <= 0x1a)) ||
- ((bank == 3) && (regNo <= 0x05 || regNo == 0x0a))) {
- /* ignore first byte and read another byte */
- rxByte = spi_read ();
+ if (eir_reg & ENC_EIR_RXERIF) {
+ printf("%s: rx error\n", enc->dev->name);
+ enc_bclr(enc, CTL_REG_EIR, ENC_EIR_RXERIF);
}
-
- enc_disable ();
- spi_unlock ();
-
- return rxByte;
-}
-
-static void encReadBuff (unsigned short length, unsigned char *pBuff)
-{
- spi_lock ();
- enc_cfg_spi ();
- enc_enable ();
-
- spi_write (0x20 | 0x1a); /* read buffer memory */
-
- while (length--) {
- if (pBuff != NULL)
- *pBuff++ = spi_read ();
- else
- spi_write (0);
+ if (eir_reg & ENC_EIR_TXERIF) {
+ printf("%s: tx error\n", enc->dev->name);
+ enc_bclr(enc, CTL_REG_EIR, ENC_EIR_TXERIF);
}
-
- enc_disable ();
- spi_unlock ();
-}
-
-static void encWriteBuff (unsigned short length, unsigned char *pBuff)
-{
- spi_lock ();
- enc_cfg_spi ();
- enc_enable ();
-
- spi_write (0x60 | 0x1a); /* write buffer memory */
-
- spi_write (0x00); /* control byte */
-
- while (length--)
- spi_write (*pBuff++);
-
- enc_disable ();
- spi_unlock ();
-}
-
-static void encBitSet (unsigned char regNo, unsigned char data)
-{
- spi_lock ();
- enc_cfg_spi ();
- enc_enable ();
-
- spi_write (0x80 | regNo); /* bit field set */
- spi_write (data);
-
- enc_disable ();
- spi_unlock ();
-}
-
-static void encBitClr (unsigned char regNo, unsigned char data)
-{
- spi_lock ();
- enc_cfg_spi ();
- enc_enable ();
-
- spi_write (0xA0 | regNo); /* bit field clear */
- spi_write (data);
-
- enc_disable ();
- spi_unlock ();
+#ifdef CONFIG_USE_IRQ
+ /* set global interrupt enable bit in enc28j60 */
+ enc_bset(enc, CTL_REG_EIE, ENC_EIE_INTIE);
+#endif
}
-static void encReset (void)
+/*
+ * Completely Reset the ENC
+ */
+static void enc_reset(enc_dev_t *enc)
{
- spi_lock ();
- enc_cfg_spi ();
- enc_enable ();
-
- spi_write (0xff); /* soft reset */
-
- enc_disable ();
- spi_unlock ();
+ u8 dout[1];
+ dout[0] = CMD_SRC;
+ spi_xfer(enc->slave, 8, dout, NULL,
+ SPI_XFER_BEGIN | SPI_XFER_END);
/* sleep 1 ms. See errata pt. 2 */
- udelay (1000);
+ udelay(1000);
}
-static void encInit (unsigned char *pEthAddr)
-{
- unsigned short phid1 = 0;
- unsigned short phid2 = 0;
-
- /* switch to bank 0 */
- m_nic_bfc (CTL_REG_ECON1, (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0));
-
+/*
+ * Initialisation data for most of the ENC registers
+ */
+static const u16 enc_initdata[] = {
/*
* Setup the buffer space. The reset values are valid for the
* other pointers.
+ *
+ * We shall not write to ERXST, see errata pt. 5. Instead we
+ * have to make sure that ENC_RX_BUS_START is 0.
*/
- /* We shall not write to ERXST, see errata pt. 5. Instead we
- have to make sure that ENC_RX_BUS_START is 0. */
- m_nic_write_retry (CTL_REG_ERXSTL, (ENC_RX_BUF_START & 0xFF), 1);
- m_nic_write_retry (CTL_REG_ERXSTH, (ENC_RX_BUF_START >> 8), 1);
-
- /* taken from the Linux driver */
- m_nic_write_retry (CTL_REG_ERXNDL, (ENC_RX_BUF_END & 0xFF), 1);
- m_nic_write_retry (CTL_REG_ERXNDH, (ENC_RX_BUF_END >> 8), 1);
-
- m_nic_write_retry (CTL_REG_ERDPTL, (ENC_RX_BUF_START & 0xFF), 1);
- m_nic_write_retry (CTL_REG_ERDPTH, (ENC_RX_BUF_START >> 8), 1);
-
- next_pointer_lsb = (ENC_RX_BUF_START & 0xFF);
- next_pointer_msb = (ENC_RX_BUF_START >> 8);
-
- /* verify identification */
- phid1 = phyRead (PHY_REG_PHID1);
- phid2 = phyRead (PHY_REG_PHID2);
-
- if (phid1 != ENC_PHID1_VALUE
- || (phid2 & ENC_PHID2_MASK) != ENC_PHID2_VALUE) {
- printf ("ERROR: failed to identify controller\n");
- printf ("phid1 = %x, phid2 = %x\n",
- phid1, (phid2 & ENC_PHID2_MASK));
- printf ("should be phid1 = %x, phid2 = %x\n",
- ENC_PHID1_VALUE, ENC_PHID2_VALUE);
- }
-
+ CTL_REG_ERXSTL, ENC_RX_BUF_START,
+ CTL_REG_ERXSTH, ENC_RX_BUF_START >> 8,
+ CTL_REG_ERXNDL, ENC_RX_BUF_END,
+ CTL_REG_ERXNDH, ENC_RX_BUF_END >> 8,
+ CTL_REG_ERDPTL, ENC_RX_BUF_START,
+ CTL_REG_ERDPTH, ENC_RX_BUF_START >> 8,
/*
- * --- MAC Initialization ---
+ * Set the filter to receive only good-CRC, unicast and broadcast
+ * frames.
+ * Note: some DHCP servers return their answers as broadcasts!
+ * So its unwise to remove broadcast from this. This driver
+ * might incur receiver overruns with packet loss on a broadcast
+ * flooded network.
*/
-
- /* Pull MAC out of Reset */
-
- /* switch to bank 2 */
- m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL0);
- m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL1);
+ CTL_REG_ERXFCON, ENC_RFR_BCEN | ENC_RFR_UCEN | ENC_RFR_CRCEN,
/* enable MAC to receive frames */
- /* added some bits from the Linux driver */
- m_nic_write_retry (CTL_REG_MACON1
- ,(ENC_MACON1_MARXEN | ENC_MACON1_TXPAUS | ENC_MACON1_RXPAUS)
- ,10);
+ CTL_REG_MACON1,
+ ENC_MACON1_MARXEN | ENC_MACON1_TXPAUS | ENC_MACON1_RXPAUS,
/* configure pad, tx-crc and duplex */
- /* added a bit from the Linux driver */
- m_nic_write_retry (CTL_REG_MACON3
- ,(ENC_MACON3_PADCFG0 | ENC_MACON3_TXCRCEN | ENC_MACON3_FRMLNEN)
- ,10);
+ CTL_REG_MACON3,
+ ENC_MACON3_PADCFG0 | ENC_MACON3_TXCRCEN |
+ ENC_MACON3_FRMLNEN,
- /* added 4 new lines from the Linux driver */
/* Allow infinite deferals if the medium is continously busy */
- m_nic_write_retry(CTL_REG_MACON4, (1<<6) /*ENC_MACON4_DEFER*/, 10);
+ CTL_REG_MACON4, ENC_MACON4_DEFER,
/* Late collisions occur beyond 63 bytes */
- m_nic_write_retry(CTL_REG_MACLCON2, 63, 10);
+ CTL_REG_MACLCON2, 63,
- /* Set (low byte) Non-Back-to_Back Inter-Packet Gap. Recommended 0x12 */
- m_nic_write_retry(CTL_REG_MAIPGL, 0x12, 10);
+ /*
+ * Set (low byte) Non-Back-to_Back Inter-Packet Gap.
+ * Recommended 0x12
+ */
+ CTL_REG_MAIPGL, 0x12,
/*
- * Set (high byte) Non-Back-to_Back Inter-Packet Gap. Recommended
- * 0x0c for half-duplex. Nothing for full-duplex
- */
- m_nic_write_retry(CTL_REG_MAIPGH, 0x0C, 10);
+ * Set (high byte) Non-Back-to_Back Inter-Packet Gap.
+ * Recommended 0x0c for half-duplex. Nothing for full-duplex
+ */
+ CTL_REG_MAIPGH, 0x0C,
/* set maximum frame length */
- m_nic_write_retry (CTL_REG_MAMXFLL, (ENC_MAX_FRM_LEN & 0xff), 10);
- m_nic_write_retry (CTL_REG_MAMXFLH, (ENC_MAX_FRM_LEN >> 8), 10);
+ CTL_REG_MAMXFLL, ENC_MAX_FRM_LEN,
+ CTL_REG_MAMXFLH, ENC_MAX_FRM_LEN >> 8,
/*
- * Set MAC back-to-back inter-packet gap. Recommended 0x12 for half duplex
+ * Set MAC back-to-back inter-packet gap.
+ * Recommended 0x12 for half duplex
* and 0x15 for full duplex.
*/
- m_nic_write_retry (CTL_REG_MABBIPG, 0x12, 10);
+ CTL_REG_MABBIPG, 0x12,
- /* set MAC address */
+ /* end of table */
+ 0xffff
+};
- /* switch to bank 3 */
- m_nic_bfs (CTL_REG_ECON1, (ENC_ECON1_BSEL0 | ENC_ECON1_BSEL1));
+/*
+ * Wait for the XTAL oscillator to become ready
+ */
+static int enc_clock_wait(enc_dev_t *enc)
+{
+ uint64_t etime;
- m_nic_write_retry (CTL_REG_MAADR0, pEthAddr[5], 1);
- m_nic_write_retry (CTL_REG_MAADR1, pEthAddr[4], 1);
- m_nic_write_retry (CTL_REG_MAADR2, pEthAddr[3], 1);
- m_nic_write_retry (CTL_REG_MAADR3, pEthAddr[2], 1);
- m_nic_write_retry (CTL_REG_MAADR4, pEthAddr[1], 1);
- m_nic_write_retry (CTL_REG_MAADR5, pEthAddr[0], 1);
+ /* one second timeout */
+ etime = get_ticks() + get_tbclk();
/*
- * PHY Initialization taken from the Linux driver
+ * Wait for CLKRDY to become set (i.e., check that we can
+ * communicate with the ENC)
*/
+ do
+ {
+ if (enc_r8(enc, CTL_REG_ESTAT) & ENC_ESTAT_CLKRDY)
+ return 0;
+ } while (get_ticks() <= etime);
+
+ printf("%s: timeout waiting for CLKRDY\n", enc->dev->name);
+ return -1;
+}
+
+/*
+ * Write the MAC address into the ENC
+ */
+static int enc_write_macaddr(enc_dev_t *enc)
+{
+ unsigned char *p = enc->dev->enetaddr;
+
+ enc_w8_retry(enc, CTL_REG_MAADR5, *p++, 5);
+ enc_w8_retry(enc, CTL_REG_MAADR4, *p++, 5);
+ enc_w8_retry(enc, CTL_REG_MAADR3, *p++, 5);
+ enc_w8_retry(enc, CTL_REG_MAADR2, *p++, 5);
+ enc_w8_retry(enc, CTL_REG_MAADR1, *p++, 5);
+ enc_w8_retry(enc, CTL_REG_MAADR0, *p, 5);
+ return 0;
+}
+
+/*
+ * Setup most of the ENC registers
+ */
+static int enc_setup(enc_dev_t *enc)
+{
+ u16 phid1 = 0;
+ u16 phid2 = 0;
+ const u16 *tp;
+
+ /* reset enc struct values */
+ enc->next_pointer = ENC_RX_BUF_START;
+ enc->rx_reset_counter = RX_RESET_COUNTER;
+ enc->bank = 0xff; /* invalidate current bank in enc28j60 */
+
+ /* verify PHY identification */
+ phid1 = phy_read(enc, PHY_REG_PHID1);
+ phid2 = phy_read(enc, PHY_REG_PHID2) & ENC_PHID2_MASK;
+ if (phid1 != ENC_PHID1_VALUE || phid2 != ENC_PHID2_VALUE) {
+ printf("%s: failed to identify PHY. Found %04x:%04x\n",
+ enc->dev->name, phid1, phid2);
+ return -1;
+ }
- /* Prevent automatic loopback of data beeing transmitted by setting
- ENC_PHCON2_HDLDIS */
- phyWrite(PHY_REG_PHCON2, (1<<8));
+ /* now program registers */
+ for (tp = enc_initdata; *tp != 0xffff; tp += 2)
+ enc_w8_retry(enc, tp[0], tp[1], 10);
+
+ /*
+ * Prevent automatic loopback of data beeing transmitted by setting
+ * ENC_PHCON2_HDLDIS
+ */
+ phy_write(enc, PHY_REG_PHCON2, (1<<8));
- /* LEDs configuration
+ /*
+ * LEDs configuration
* LEDA: LACFG = 0100 -> display link status
* LEDB: LBCFG = 0111 -> display TX & RX activity
* STRCH = 1 -> LED pulses
*/
- phyWrite(PHY_REG_PHLCON, 0x0472);
+ phy_write(enc, PHY_REG_PHLCON, 0x0472);
/* Reset PDPXMD-bit => half duplex */
- phyWrite(PHY_REG_PHCON1, 0);
-
- /*
- * Receive settings
- */
+ phy_write(enc, PHY_REG_PHCON1, 0);
#ifdef CONFIG_USE_IRQ
/* enable interrupts */
- m_nic_bfs (CTL_REG_EIE, ENC_EIE_PKTIE);
- m_nic_bfs (CTL_REG_EIE, ENC_EIE_TXIE);
- m_nic_bfs (CTL_REG_EIE, ENC_EIE_RXERIE);
- m_nic_bfs (CTL_REG_EIE, ENC_EIE_TXERIE);
- m_nic_bfs (CTL_REG_EIE, ENC_EIE_INTIE);
+ enc_bset(enc, CTL_REG_EIE, ENC_EIE_PKTIE);
+ enc_bset(enc, CTL_REG_EIE, ENC_EIE_TXIE);
+ enc_bset(enc, CTL_REG_EIE, ENC_EIE_RXERIE);
+ enc_bset(enc, CTL_REG_EIE, ENC_EIE_TXERIE);
+ enc_bset(enc, CTL_REG_EIE, ENC_EIE_INTIE);
#endif
+
+ return 0;
}
-/*****************************************************************************
- *
- * Description:
- * Read PHY registers.
- *
- * NOTE! This function will change to Bank 2.
- *
- * Params:
- * [in] addr address of the register to read
- *
- * Returns:
- * The value in the register
+/*
+ * Check if ENC has been initialized.
+ * If not, try to initialize it.
+ * Remember initialized state in struct.
*/
-static unsigned short phyRead (unsigned char addr)
+static int enc_initcheck(enc_dev_t *enc, const enum enc_initstate requiredstate)
{
- unsigned short ret = 0;
-
- /* move to bank 2 */
- m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL0);
- m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL1);
+ if (enc->initstate >= requiredstate)
+ return 0;
+
+ if (enc->initstate < setupdone) {
+ /* Initialize the ENC only */
+ enc_reset(enc);
+ /* if any of functions fails, skip the rest and return an error */
+ if (enc_clock_wait(enc) || enc_setup(enc) || enc_write_macaddr(enc)) {
+ return -1;
+ }
+ enc->initstate = setupdone;
+ }
+ /* if that's all we need, return here */
+ if (enc->initstate >= requiredstate)
+ return 0;
- /* write address to MIREGADR */
- m_nic_write (CTL_REG_MIREGADR, addr);
+ /* now wait for link ready condition */
+ if (enc_phy_link_wait(enc)) {
+ return -1;
+ }
+ enc->initstate = linkready;
+ return 0;
+}
- /* set MICMD.MIIRD */
- m_nic_write (CTL_REG_MICMD, ENC_MICMD_MIIRD);
+#if defined(CONFIG_CMD_MII)
+/*
+ * Read a PHY register.
+ *
+ * This function is registered with miiphy_register().
+ */
+int enc_miiphy_read(const char *devname, u8 phy_adr, u8 reg, u16 *value)
+{
+ struct eth_device *dev = eth_get_dev_by_name(devname);
+ enc_dev_t *enc;
+
+ if (!dev || phy_adr != 0)
+ return -1;
+
+ enc = dev->priv;
+ if (enc_claim_bus(enc))
+ return -1;
+ if (enc_initcheck(enc, setupdone)) {
+ enc_release_bus(enc);
+ return -1;
+ }
+ *value = phy_read(enc, reg);
+ enc_release_bus(enc);
+ return 0;
+}
- /* taken from the Linux driver */
- /* move to bank 3 */
- m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL0);
- m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1);
+/*
+ * Write a PHY register.
+ *
+ * This function is registered with miiphy_register().
+ */
+int enc_miiphy_write(const char *devname, u8 phy_adr, u8 reg, u16 value)
+{
+ struct eth_device *dev = eth_get_dev_by_name(devname);
+ enc_dev_t *enc;
+
+ if (!dev || phy_adr != 0)
+ return -1;
+
+ enc = dev->priv;
+ if (enc_claim_bus(enc))
+ return -1;
+ if (enc_initcheck(enc, setupdone)) {
+ enc_release_bus(enc);
+ return -1;
+ }
+ phy_write(enc, reg, value);
+ enc_release_bus(enc);
+ return 0;
+}
+#endif
- /* poll MISTAT.BUSY bit until operation is complete */
- while ((m_nic_read (CTL_REG_MISTAT) & ENC_MISTAT_BUSY) != 0) {
- static int cnt = 0;
+/*
+ * Write hardware (MAC) address.
+ *
+ * This function entered into eth_device structure.
+ */
+static int enc_write_hwaddr(struct eth_device *dev)
+{
+ enc_dev_t *enc = dev->priv;
- if (cnt++ >= 1000) {
- /* GJ - this seems extremely dangerous! */
- /* printf("#"); */
- cnt = 0;
- }
+ if (enc_claim_bus(enc))
+ return -1;
+ if (enc_initcheck(enc, setupdone)) {
+ enc_release_bus(enc);
+ return -1;
}
+ enc_release_bus(enc);
+ return 0;
+}
- /* taken from the Linux driver */
- /* move to bank 2 */
- m_nic_bfc(CTL_REG_ECON1, ENC_ECON1_BSEL0);
- m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1);
+/*
+ * Initialize ENC28J60 for use.
+ *
+ * This function entered into eth_device structure.
+ */
+static int enc_init(struct eth_device *dev, bd_t *bis)
+{
+ enc_dev_t *enc = dev->priv;
- /* clear MICMD.MIIRD */
- m_nic_write (CTL_REG_MICMD, 0);
+ if (enc_claim_bus(enc))
+ return -1;
+ if (enc_initcheck(enc, linkready)) {
+ enc_release_bus(enc);
+ return -1;
+ }
+ /* enable receive */
+ enc_bset(enc, CTL_REG_ECON1, ENC_ECON1_RXEN);
+ enc_release_bus(enc);
+ return 0;
+}
- ret = (m_nic_read (CTL_REG_MIRDH) << 8);
- ret |= (m_nic_read (CTL_REG_MIRDL) & 0xFF);
+/*
+ * Check for received packets.
+ *
+ * This function entered into eth_device structure.
+ */
+static int enc_recv(struct eth_device *dev)
+{
+ enc_dev_t *enc = dev->priv;
- return ret;
+ if (enc_claim_bus(enc))
+ return -1;
+ if (enc_initcheck(enc, linkready)) {
+ enc_release_bus(enc);
+ return -1;
+ }
+ /* Check for dead receiver */
+ if (enc->rx_reset_counter > 0)
+ enc->rx_reset_counter--;
+ else
+ enc_reset_rx_call(enc);
+ enc_poll(enc);
+ enc_release_bus(enc);
+ return 0;
}
-/*****************************************************************************
- *
- * Taken from the Linux driver.
- * Description:
- * Write PHY registers.
- *
- * NOTE! This function will change to Bank 3.
+/*
+ * Send a packet.
*
- * Params:
- * [in] addr address of the register to write to
- * [in] data to be written
+ * This function entered into eth_device structure.
*
- * Returns:
- * None
+ * Should we wait here until we have a Link? Or shall we leave that to
+ * protocol retries?
*/
-static void phyWrite(unsigned char addr, unsigned short data)
+static int enc_send(
+ struct eth_device *dev,
+ volatile void *packet,
+ int length)
{
- /* move to bank 2 */
- m_nic_bfc(CTL_REG_ECON1, ENC_ECON1_BSEL0);
- m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1);
+ enc_dev_t *enc = dev->priv;
+
+ if (enc_claim_bus(enc))
+ return -1;
+ if (enc_initcheck(enc, linkready)) {
+ enc_release_bus(enc);
+ return -1;
+ }
+ /* setup transmit pointers */
+ enc_w16(enc, CTL_REG_EWRPTL, ENC_TX_BUF_START);
+ enc_w16(enc, CTL_REG_ETXNDL, length + ENC_TX_BUF_START);
+ enc_w16(enc, CTL_REG_ETXSTL, ENC_TX_BUF_START);
+ /* write packet to ENC */
+ enc_wbuf(enc, length, (u8 *) packet, 0x00);
+ /*
+ * Check that the internal transmit logic has not been altered
+ * by excessive collisions. Reset transmitter if so.
+ * See Errata B4 12 and 14.
+ */
+ if (enc_r8(enc, CTL_REG_EIR) & ENC_EIR_TXERIF) {
+ enc_bset(enc, CTL_REG_ECON1, ENC_ECON1_TXRST);
+ enc_bclr(enc, CTL_REG_ECON1, ENC_ECON1_TXRST);
+ }
+ enc_bclr(enc, CTL_REG_EIR, (ENC_EIR_TXERIF | ENC_EIR_TXIF));
+ /* start transmitting */
+ enc_bset(enc, CTL_REG_ECON1, ENC_ECON1_TXRTS);
+ enc_release_bus(enc);
+ return 0;
+}
- /* write address to MIREGADR */
- m_nic_write(CTL_REG_MIREGADR, addr);
+/*
+ * Finish use of ENC.
+ *
+ * This function entered into eth_device structure.
+ */
+static void enc_halt(struct eth_device *dev)
+{
+ enc_dev_t *enc = dev->priv;
- m_nic_write(CTL_REG_MIWRL, data & 0xff);
- m_nic_write(CTL_REG_MIWRH, data >> 8);
+ if (enc_claim_bus(enc))
+ return;
+ /* Just disable receiver */
+ enc_bclr(enc, CTL_REG_ECON1, ENC_ECON1_RXEN);
+ enc_release_bus(enc);
+}
- /* move to bank 3 */
- m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL0);
- m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1);
+/*
+ * This is the only exported function.
+ *
+ * It may be called several times with different bus:cs combinations.
+ */
+int enc28j60_initialize(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode)
+{
+ struct eth_device *dev;
+ enc_dev_t *enc;
- /* poll MISTAT.BUSY bit until operation is complete */
- while((m_nic_read(CTL_REG_MISTAT) & ENC_MISTAT_BUSY) != 0) {
- static int cnt = 0;
+ /* try to allocate, check and clear eth_device object */
+ dev = malloc(sizeof(*dev));
+ if (!dev) {
+ return -1;
+ }
+ memset(dev, 0, sizeof(*dev));
- if(cnt++ >= 1000) {
- cnt = 0;
- }
+ /* try to allocate, check and clear enc_dev_t object */
+ enc = malloc(sizeof(*enc));
+ if (!enc) {
+ free(dev);
+ return -1;
+ }
+ memset(enc, 0, sizeof(*enc));
+
+ /* try to setup the SPI slave */
+ enc->slave = spi_setup_slave(bus, cs, max_hz, mode);
+ if (!enc->slave) {
+ printf("enc28j60: invalid SPI device %i:%i\n", bus, cs);
+ free(enc);
+ free(dev);
+ return -1;
}
+
+ enc->dev = dev;
+ /* now fill the eth_device object */
+ dev->priv = enc;
+ dev->init = enc_init;
+ dev->halt = enc_halt;
+ dev->send = enc_send;
+ dev->recv = enc_recv;
+ dev->write_hwaddr = enc_write_hwaddr;
+ sprintf(dev->name, "enc%i.%i", bus, cs);
+ eth_register(dev);
+#if defined(CONFIG_CMD_MII)
+ miiphy_register(dev->name, enc_miiphy_read, enc_miiphy_write);
+#endif
+ return 0;
}
diff --git a/drivers/net/enc28j60.h b/drivers/net/enc28j60.h
new file mode 100644
index 0000000..888c599
--- /dev/null
+++ b/drivers/net/enc28j60.h
@@ -0,0 +1,251 @@
+/*
+ * (X) extracted from enc28j60.c
+ * Reinhard Meyer, EMK Elektronik, reinhard.meyer@emk-elektronik.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _enc28j60_h
+#define _enc28j60_h
+
+/*
+ * SPI Commands
+ *
+ * Bits 7-5: Command
+ * Bits 4-0: Register
+ */
+#define CMD_RCR(x) (0x00+((x)&0x1f)) /* Read Control Register */
+#define CMD_RBM 0x3a /* Read Buffer Memory */
+#define CMD_WCR(x) (0x40+((x)&0x1f)) /* Write Control Register */
+#define CMD_WBM 0x7a /* Write Buffer Memory */
+#define CMD_BFS(x) (0x80+((x)&0x1f)) /* Bit Field Set */
+#define CMD_BFC(x) (0xa0+((x)&0x1f)) /* Bit Field Clear */
+#define CMD_SRC 0xff /* System Reset Command */
+
+/* NEW: encode (bank number+1) in upper byte */
+
+/* Common Control Registers accessible in all Banks */
+#define CTL_REG_EIE 0x01B
+#define CTL_REG_EIR 0x01C
+#define CTL_REG_ESTAT 0x01D
+#define CTL_REG_ECON2 0x01E
+#define CTL_REG_ECON1 0x01F
+
+/* Control Registers accessible in Bank 0 */
+#define CTL_REG_ERDPTL 0x100
+#define CTL_REG_ERDPTH 0x101
+#define CTL_REG_EWRPTL 0x102
+#define CTL_REG_EWRPTH 0x103
+#define CTL_REG_ETXSTL 0x104
+#define CTL_REG_ETXSTH 0x105
+#define CTL_REG_ETXNDL 0x106
+#define CTL_REG_ETXNDH 0x107
+#define CTL_REG_ERXSTL 0x108
+#define CTL_REG_ERXSTH 0x109
+#define CTL_REG_ERXNDL 0x10A
+#define CTL_REG_ERXNDH 0x10B
+#define CTL_REG_ERXRDPTL 0x10C
+#define CTL_REG_ERXRDPTH 0x10D
+#define CTL_REG_ERXWRPTL 0x10E
+#define CTL_REG_ERXWRPTH 0x10F
+#define CTL_REG_EDMASTL 0x110
+#define CTL_REG_EDMASTH 0x111
+#define CTL_REG_EDMANDL 0x112
+#define CTL_REG_EDMANDH 0x113
+#define CTL_REG_EDMADSTL 0x114
+#define CTL_REG_EDMADSTH 0x115
+#define CTL_REG_EDMACSL 0x116
+#define CTL_REG_EDMACSH 0x117
+
+/* Control Registers accessible in Bank 1 */
+#define CTL_REG_EHT0 0x200
+#define CTL_REG_EHT1 0x201
+#define CTL_REG_EHT2 0x202
+#define CTL_REG_EHT3 0x203
+#define CTL_REG_EHT4 0x204
+#define CTL_REG_EHT5 0x205
+#define CTL_REG_EHT6 0x206
+#define CTL_REG_EHT7 0x207
+#define CTL_REG_EPMM0 0x208
+#define CTL_REG_EPMM1 0x209
+#define CTL_REG_EPMM2 0x20A
+#define CTL_REG_EPMM3 0x20B
+#define CTL_REG_EPMM4 0x20C
+#define CTL_REG_EPMM5 0x20D
+#define CTL_REG_EPMM6 0x20E
+#define CTL_REG_EPMM7 0x20F
+#define CTL_REG_EPMCSL 0x210
+#define CTL_REG_EPMCSH 0x211
+#define CTL_REG_EPMOL 0x214
+#define CTL_REG_EPMOH 0x215
+#define CTL_REG_EWOLIE 0x216
+#define CTL_REG_EWOLIR 0x217
+#define CTL_REG_ERXFCON 0x218
+#define CTL_REG_EPKTCNT 0x219
+
+/* Control Registers accessible in Bank 2 */
+#define CTL_REG_MACON1 0x300
+#define CTL_REG_MACON2 0x301
+#define CTL_REG_MACON3 0x302
+#define CTL_REG_MACON4 0x303
+#define CTL_REG_MABBIPG 0x304
+#define CTL_REG_MAIPGL 0x306
+#define CTL_REG_MAIPGH 0x307
+#define CTL_REG_MACLCON1 0x308
+#define CTL_REG_MACLCON2 0x309
+#define CTL_REG_MAMXFLL 0x30A
+#define CTL_REG_MAMXFLH 0x30B
+#define CTL_REG_MAPHSUP 0x30D
+#define CTL_REG_MICON 0x311
+#define CTL_REG_MICMD 0x312
+#define CTL_REG_MIREGADR 0x314
+#define CTL_REG_MIWRL 0x316
+#define CTL_REG_MIWRH 0x317
+#define CTL_REG_MIRDL 0x318
+#define CTL_REG_MIRDH 0x319
+
+/* Control Registers accessible in Bank 3 */
+#define CTL_REG_MAADR1 0x400
+#define CTL_REG_MAADR0 0x401
+#define CTL_REG_MAADR3 0x402
+#define CTL_REG_MAADR2 0x403
+#define CTL_REG_MAADR5 0x404
+#define CTL_REG_MAADR4 0x405
+#define CTL_REG_EBSTSD 0x406
+#define CTL_REG_EBSTCON 0x407
+#define CTL_REG_EBSTCSL 0x408
+#define CTL_REG_EBSTCSH 0x409
+#define CTL_REG_MISTAT 0x40A
+#define CTL_REG_EREVID 0x412
+#define CTL_REG_ECOCON 0x415
+#define CTL_REG_EFLOCON 0x417
+#define CTL_REG_EPAUSL 0x418
+#define CTL_REG_EPAUSH 0x419
+
+/* PHY Register */
+#define PHY_REG_PHCON1 0x00
+#define PHY_REG_PHSTAT1 0x01
+#define PHY_REG_PHID1 0x02
+#define PHY_REG_PHID2 0x03
+#define PHY_REG_PHCON2 0x10
+#define PHY_REG_PHSTAT2 0x11
+#define PHY_REG_PHLCON 0x14
+
+/* Receive Filter Register (ERXFCON) bits */
+#define ENC_RFR_UCEN 0x80
+#define ENC_RFR_ANDOR 0x40
+#define ENC_RFR_CRCEN 0x20
+#define ENC_RFR_PMEN 0x10
+#define ENC_RFR_MPEN 0x08
+#define ENC_RFR_HTEN 0x04
+#define ENC_RFR_MCEN 0x02
+#define ENC_RFR_BCEN 0x01
+
+/* ECON1 Register Bits */
+#define ENC_ECON1_TXRST 0x80
+#define ENC_ECON1_RXRST 0x40
+#define ENC_ECON1_DMAST 0x20
+#define ENC_ECON1_CSUMEN 0x10
+#define ENC_ECON1_TXRTS 0x08
+#define ENC_ECON1_RXEN 0x04
+#define ENC_ECON1_BSEL1 0x02
+#define ENC_ECON1_BSEL0 0x01
+
+/* ECON2 Register Bits */
+#define ENC_ECON2_AUTOINC 0x80
+#define ENC_ECON2_PKTDEC 0x40
+#define ENC_ECON2_PWRSV 0x20
+#define ENC_ECON2_VRPS 0x08
+
+/* EIR Register Bits */
+#define ENC_EIR_PKTIF 0x40
+#define ENC_EIR_DMAIF 0x20
+#define ENC_EIR_LINKIF 0x10
+#define ENC_EIR_TXIF 0x08
+#define ENC_EIR_WOLIF 0x04
+#define ENC_EIR_TXERIF 0x02
+#define ENC_EIR_RXERIF 0x01
+
+/* ESTAT Register Bits */
+#define ENC_ESTAT_INT 0x80
+#define ENC_ESTAT_LATECOL 0x10
+#define ENC_ESTAT_RXBUSY 0x04
+#define ENC_ESTAT_TXABRT 0x02
+#define ENC_ESTAT_CLKRDY 0x01
+
+/* EIE Register Bits */
+#define ENC_EIE_INTIE 0x80
+#define ENC_EIE_PKTIE 0x40
+#define ENC_EIE_DMAIE 0x20
+#define ENC_EIE_LINKIE 0x10
+#define ENC_EIE_TXIE 0x08
+#define ENC_EIE_WOLIE 0x04
+#define ENC_EIE_TXERIE 0x02
+#define ENC_EIE_RXERIE 0x01
+
+/* MACON1 Register Bits */
+#define ENC_MACON1_LOOPBK 0x10
+#define ENC_MACON1_TXPAUS 0x08
+#define ENC_MACON1_RXPAUS 0x04
+#define ENC_MACON1_PASSALL 0x02
+#define ENC_MACON1_MARXEN 0x01
+
+/* MACON2 Register Bits */
+#define ENC_MACON2_MARST 0x80
+#define ENC_MACON2_RNDRST 0x40
+#define ENC_MACON2_MARXRST 0x08
+#define ENC_MACON2_RFUNRST 0x04
+#define ENC_MACON2_MATXRST 0x02
+#define ENC_MACON2_TFUNRST 0x01
+
+/* MACON3 Register Bits */
+#define ENC_MACON3_PADCFG2 0x80
+#define ENC_MACON3_PADCFG1 0x40
+#define ENC_MACON3_PADCFG0 0x20
+#define ENC_MACON3_TXCRCEN 0x10
+#define ENC_MACON3_PHDRLEN 0x08
+#define ENC_MACON3_HFRMEN 0x04
+#define ENC_MACON3_FRMLNEN 0x02
+#define ENC_MACON3_FULDPX 0x01
+
+/* MACON4 Register Bits */
+#define ENC_MACON4_DEFER 0x40
+
+/* MICMD Register Bits */
+#define ENC_MICMD_MIISCAN 0x02
+#define ENC_MICMD_MIIRD 0x01
+
+/* MISTAT Register Bits */
+#define ENC_MISTAT_NVALID 0x04
+#define ENC_MISTAT_SCAN 0x02
+#define ENC_MISTAT_BUSY 0x01
+
+/* PHID1 and PHID2 values */
+#define ENC_PHID1_VALUE 0x0083
+#define ENC_PHID2_VALUE 0x1400
+#define ENC_PHID2_MASK 0xFC00
+
+/* PHCON1 values */
+#define ENC_PHCON1_PDPXMD 0x0100
+
+/* PHSTAT1 values */
+#define ENC_PHSTAT1_LLSTAT 0x0004
+
+/* PHSTAT2 values */
+#define ENC_PHSTAT2_LSTAT 0x0400
+#define ENC_PHSTAT2_DPXSTAT 0x0200
+
+#endif
diff --git a/drivers/net/enc28j60_lpc2292.c b/drivers/net/enc28j60_lpc2292.c
new file mode 100644
index 0000000..bf95052
--- /dev/null
+++ b/drivers/net/enc28j60_lpc2292.c
@@ -0,0 +1,983 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#warning This driver is depreciated. Please update to new SPI framework enc28j60 driver
+#include <config.h>
+#include <common.h>
+#include <net.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/spi.h>
+
+/*
+ * Control Registers in Bank 0
+ */
+
+#define CTL_REG_ERDPTL 0x00
+#define CTL_REG_ERDPTH 0x01
+#define CTL_REG_EWRPTL 0x02
+#define CTL_REG_EWRPTH 0x03
+#define CTL_REG_ETXSTL 0x04
+#define CTL_REG_ETXSTH 0x05
+#define CTL_REG_ETXNDL 0x06
+#define CTL_REG_ETXNDH 0x07
+#define CTL_REG_ERXSTL 0x08
+#define CTL_REG_ERXSTH 0x09
+#define CTL_REG_ERXNDL 0x0A
+#define CTL_REG_ERXNDH 0x0B
+#define CTL_REG_ERXRDPTL 0x0C
+#define CTL_REG_ERXRDPTH 0x0D
+#define CTL_REG_ERXWRPTL 0x0E
+#define CTL_REG_ERXWRPTH 0x0F
+#define CTL_REG_EDMASTL 0x10
+#define CTL_REG_EDMASTH 0x11
+#define CTL_REG_EDMANDL 0x12
+#define CTL_REG_EDMANDH 0x13
+#define CTL_REG_EDMADSTL 0x14
+#define CTL_REG_EDMADSTH 0x15
+#define CTL_REG_EDMACSL 0x16
+#define CTL_REG_EDMACSH 0x17
+/* these are common in all banks */
+#define CTL_REG_EIE 0x1B
+#define CTL_REG_EIR 0x1C
+#define CTL_REG_ESTAT 0x1D
+#define CTL_REG_ECON2 0x1E
+#define CTL_REG_ECON1 0x1F
+
+/*
+ * Control Registers in Bank 1
+ */
+
+#define CTL_REG_EHT0 0x00
+#define CTL_REG_EHT1 0x01
+#define CTL_REG_EHT2 0x02
+#define CTL_REG_EHT3 0x03
+#define CTL_REG_EHT4 0x04
+#define CTL_REG_EHT5 0x05
+#define CTL_REG_EHT6 0x06
+#define CTL_REG_EHT7 0x07
+#define CTL_REG_EPMM0 0x08
+#define CTL_REG_EPMM1 0x09
+#define CTL_REG_EPMM2 0x0A
+#define CTL_REG_EPMM3 0x0B
+#define CTL_REG_EPMM4 0x0C
+#define CTL_REG_EPMM5 0x0D
+#define CTL_REG_EPMM6 0x0E
+#define CTL_REG_EPMM7 0x0F
+#define CTL_REG_EPMCSL 0x10
+#define CTL_REG_EPMCSH 0x11
+#define CTL_REG_EPMOL 0x14
+#define CTL_REG_EPMOH 0x15
+#define CTL_REG_EWOLIE 0x16
+#define CTL_REG_EWOLIR 0x17
+#define CTL_REG_ERXFCON 0x18
+#define CTL_REG_EPKTCNT 0x19
+
+/*
+ * Control Registers in Bank 2
+ */
+
+#define CTL_REG_MACON1 0x00
+#define CTL_REG_MACON2 0x01
+#define CTL_REG_MACON3 0x02
+#define CTL_REG_MACON4 0x03
+#define CTL_REG_MABBIPG 0x04
+#define CTL_REG_MAIPGL 0x06
+#define CTL_REG_MAIPGH 0x07
+#define CTL_REG_MACLCON1 0x08
+#define CTL_REG_MACLCON2 0x09
+#define CTL_REG_MAMXFLL 0x0A
+#define CTL_REG_MAMXFLH 0x0B
+#define CTL_REG_MAPHSUP 0x0D
+#define CTL_REG_MICON 0x11
+#define CTL_REG_MICMD 0x12
+#define CTL_REG_MIREGADR 0x14
+#define CTL_REG_MIWRL 0x16
+#define CTL_REG_MIWRH 0x17
+#define CTL_REG_MIRDL 0x18
+#define CTL_REG_MIRDH 0x19
+
+/*
+ * Control Registers in Bank 3
+ */
+
+#define CTL_REG_MAADR1 0x00
+#define CTL_REG_MAADR0 0x01
+#define CTL_REG_MAADR3 0x02
+#define CTL_REG_MAADR2 0x03
+#define CTL_REG_MAADR5 0x04
+#define CTL_REG_MAADR4 0x05
+#define CTL_REG_EBSTSD 0x06
+#define CTL_REG_EBSTCON 0x07
+#define CTL_REG_EBSTCSL 0x08
+#define CTL_REG_EBSTCSH 0x09
+#define CTL_REG_MISTAT 0x0A
+#define CTL_REG_EREVID 0x12
+#define CTL_REG_ECOCON 0x15
+#define CTL_REG_EFLOCON 0x17
+#define CTL_REG_EPAUSL 0x18
+#define CTL_REG_EPAUSH 0x19
+
+
+/*
+ * PHY Register
+ */
+
+#define PHY_REG_PHID1 0x02
+#define PHY_REG_PHID2 0x03
+/* taken from the Linux driver */
+#define PHY_REG_PHCON1 0x00
+#define PHY_REG_PHCON2 0x10
+#define PHY_REG_PHLCON 0x14
+
+/*
+ * Receive Filter Register (ERXFCON) bits
+ */
+
+#define ENC_RFR_UCEN 0x80
+#define ENC_RFR_ANDOR 0x40
+#define ENC_RFR_CRCEN 0x20
+#define ENC_RFR_PMEN 0x10
+#define ENC_RFR_MPEN 0x08
+#define ENC_RFR_HTEN 0x04
+#define ENC_RFR_MCEN 0x02
+#define ENC_RFR_BCEN 0x01
+
+/*
+ * ECON1 Register Bits
+ */
+
+#define ENC_ECON1_TXRST 0x80
+#define ENC_ECON1_RXRST 0x40
+#define ENC_ECON1_DMAST 0x20
+#define ENC_ECON1_CSUMEN 0x10
+#define ENC_ECON1_TXRTS 0x08
+#define ENC_ECON1_RXEN 0x04
+#define ENC_ECON1_BSEL1 0x02
+#define ENC_ECON1_BSEL0 0x01
+
+/*
+ * ECON2 Register Bits
+ */
+#define ENC_ECON2_AUTOINC 0x80
+#define ENC_ECON2_PKTDEC 0x40
+#define ENC_ECON2_PWRSV 0x20
+#define ENC_ECON2_VRPS 0x08
+
+/*
+ * EIR Register Bits
+ */
+#define ENC_EIR_PKTIF 0x40
+#define ENC_EIR_DMAIF 0x20
+#define ENC_EIR_LINKIF 0x10
+#define ENC_EIR_TXIF 0x08
+#define ENC_EIR_WOLIF 0x04
+#define ENC_EIR_TXERIF 0x02
+#define ENC_EIR_RXERIF 0x01
+
+/*
+ * ESTAT Register Bits
+ */
+
+#define ENC_ESTAT_INT 0x80
+#define ENC_ESTAT_LATECOL 0x10
+#define ENC_ESTAT_RXBUSY 0x04
+#define ENC_ESTAT_TXABRT 0x02
+#define ENC_ESTAT_CLKRDY 0x01
+
+/*
+ * EIE Register Bits
+ */
+
+#define ENC_EIE_INTIE 0x80
+#define ENC_EIE_PKTIE 0x40
+#define ENC_EIE_DMAIE 0x20
+#define ENC_EIE_LINKIE 0x10
+#define ENC_EIE_TXIE 0x08
+#define ENC_EIE_WOLIE 0x04
+#define ENC_EIE_TXERIE 0x02
+#define ENC_EIE_RXERIE 0x01
+
+/*
+ * MACON1 Register Bits
+ */
+#define ENC_MACON1_LOOPBK 0x10
+#define ENC_MACON1_TXPAUS 0x08
+#define ENC_MACON1_RXPAUS 0x04
+#define ENC_MACON1_PASSALL 0x02
+#define ENC_MACON1_MARXEN 0x01
+
+
+/*
+ * MACON2 Register Bits
+ */
+#define ENC_MACON2_MARST 0x80
+#define ENC_MACON2_RNDRST 0x40
+#define ENC_MACON2_MARXRST 0x08
+#define ENC_MACON2_RFUNRST 0x04
+#define ENC_MACON2_MATXRST 0x02
+#define ENC_MACON2_TFUNRST 0x01
+
+/*
+ * MACON3 Register Bits
+ */
+#define ENC_MACON3_PADCFG2 0x80
+#define ENC_MACON3_PADCFG1 0x40
+#define ENC_MACON3_PADCFG0 0x20
+#define ENC_MACON3_TXCRCEN 0x10
+#define ENC_MACON3_PHDRLEN 0x08
+#define ENC_MACON3_HFRMEN 0x04
+#define ENC_MACON3_FRMLNEN 0x02
+#define ENC_MACON3_FULDPX 0x01
+
+/*
+ * MICMD Register Bits
+ */
+#define ENC_MICMD_MIISCAN 0x02
+#define ENC_MICMD_MIIRD 0x01
+
+/*
+ * MISTAT Register Bits
+ */
+#define ENC_MISTAT_NVALID 0x04
+#define ENC_MISTAT_SCAN 0x02
+#define ENC_MISTAT_BUSY 0x01
+
+/*
+ * PHID1 and PHID2 values
+ */
+#define ENC_PHID1_VALUE 0x0083
+#define ENC_PHID2_VALUE 0x1400
+#define ENC_PHID2_MASK 0xFC00
+
+
+#define ENC_SPI_SLAVE_CS 0x00010000 /* pin P1.16 */
+#define ENC_RESET 0x00020000 /* pin P1.17 */
+
+#define FAILSAFE_VALUE 5000
+
+/*
+ * Controller memory layout:
+ *
+ * 0x0000 - 0x17ff 6k bytes receive buffer
+ * 0x1800 - 0x1fff 2k bytes transmit buffer
+ */
+/* Use the lower memory for receiver buffer. See errata pt. 5 */
+#define ENC_RX_BUF_START 0x0000
+#define ENC_TX_BUF_START 0x1800
+/* taken from the Linux driver */
+#define ENC_RX_BUF_END 0x17ff
+#define ENC_TX_BUF_END 0x1fff
+
+/* maximum frame length */
+#define ENC_MAX_FRM_LEN 1518
+
+#define enc_enable() PUT32(IO1CLR, ENC_SPI_SLAVE_CS)
+#define enc_disable() PUT32(IO1SET, ENC_SPI_SLAVE_CS)
+#define enc_cfg_spi() spi_set_cfg(0, 0, 0); spi_set_clock(8);
+
+
+static unsigned char encReadReg (unsigned char regNo);
+static void encWriteReg (unsigned char regNo, unsigned char data);
+static void encWriteRegRetry (unsigned char regNo, unsigned char data, int c);
+static void encReadBuff (unsigned short length, unsigned char *pBuff);
+static void encWriteBuff (unsigned short length, unsigned char *pBuff);
+static void encBitSet (unsigned char regNo, unsigned char data);
+static void encBitClr (unsigned char regNo, unsigned char data);
+static void encReset (void);
+static void encInit (unsigned char *pEthAddr);
+static unsigned short phyRead (unsigned char addr);
+static void phyWrite(unsigned char, unsigned short);
+static void encPoll (void);
+static void encRx (void);
+
+#define m_nic_read(reg) encReadReg(reg)
+#define m_nic_write(reg, data) encWriteReg(reg, data)
+#define m_nic_write_retry(reg, data, count) encWriteRegRetry(reg, data, count)
+#define m_nic_read_data(len, buf) encReadBuff((len), (buf))
+#define m_nic_write_data(len, buf) encWriteBuff((len), (buf))
+
+/* bit field set */
+#define m_nic_bfs(reg, data) encBitSet(reg, data)
+
+/* bit field clear */
+#define m_nic_bfc(reg, data) encBitClr(reg, data)
+
+static unsigned char bank = 0; /* current bank in enc28j60 */
+static unsigned char next_pointer_lsb;
+static unsigned char next_pointer_msb;
+
+static unsigned char buffer[ENC_MAX_FRM_LEN];
+static int rxResetCounter = 0;
+
+#define RX_RESET_COUNTER 1000;
+
+/*-----------------------------------------------------------------------------
+ * Always returns 0
+ */
+int eth_init (bd_t * bis)
+{
+ unsigned char estatVal;
+ uchar enetaddr[6];
+
+ /* configure GPIO */
+ (*((volatile unsigned long *) IO1DIR)) |= ENC_SPI_SLAVE_CS;
+ (*((volatile unsigned long *) IO1DIR)) |= ENC_RESET;
+
+ /* CS and RESET active low */
+ PUT32 (IO1SET, ENC_SPI_SLAVE_CS);
+ PUT32 (IO1SET, ENC_RESET);
+
+ spi_init ();
+
+ /* taken from the Linux driver - dangerous stuff here! */
+ /* Wait for CLKRDY to become set (i.e., check that we can communicate with
+ the ENC) */
+ do
+ {
+ estatVal = m_nic_read(CTL_REG_ESTAT);
+ } while ((estatVal & 0x08) || (~estatVal & ENC_ESTAT_CLKRDY));
+
+ /* initialize controller */
+ encReset ();
+ eth_getenv_enetaddr("ethaddr", enetaddr);
+ encInit (enetaddr);
+
+ m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_RXEN); /* enable receive */
+
+ return 0;
+}
+
+int eth_send (volatile void *packet, int length)
+{
+ /* check frame length, etc. */
+ /* TODO: */
+
+ /* switch to bank 0 */
+ m_nic_bfc (CTL_REG_ECON1, (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0));
+
+ /* set EWRPT */
+ m_nic_write (CTL_REG_EWRPTL, (ENC_TX_BUF_START & 0xff));
+ m_nic_write (CTL_REG_EWRPTH, (ENC_TX_BUF_START >> 8));
+
+ /* set ETXND */
+ m_nic_write (CTL_REG_ETXNDL, (length + ENC_TX_BUF_START) & 0xFF);
+ m_nic_write (CTL_REG_ETXNDH, (length + ENC_TX_BUF_START) >> 8);
+
+ /* set ETXST */
+ m_nic_write (CTL_REG_ETXSTL, ENC_TX_BUF_START & 0xFF);
+ m_nic_write (CTL_REG_ETXSTH, ENC_TX_BUF_START >> 8);
+
+ /* write packet */
+ m_nic_write_data (length, (unsigned char *) packet);
+
+ /* taken from the Linux driver */
+ /* Verify that the internal transmit logic has not been altered by excessive
+ collisions. See Errata B4 12 and 14.
+ */
+ if (m_nic_read(CTL_REG_EIR) & ENC_EIR_TXERIF) {
+ m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_TXRST);
+ m_nic_bfc(CTL_REG_ECON1, ENC_ECON1_TXRST);
+ }
+ m_nic_bfc(CTL_REG_EIR, (ENC_EIR_TXERIF | ENC_EIR_TXIF));
+
+ /* set ECON1.TXRTS */
+ m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_TXRTS);
+
+ return 0;
+}
+
+
+/*****************************************************************************
+ * This function resets the receiver only. This function may be called from
+ * interrupt-context.
+ */
+static void encReceiverReset (void)
+{
+ unsigned char econ1;
+
+ econ1 = m_nic_read (CTL_REG_ECON1);
+ if ((econ1 & ENC_ECON1_RXRST) == 0) {
+ m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_RXRST);
+ rxResetCounter = RX_RESET_COUNTER;
+ }
+}
+
+/*****************************************************************************
+ * receiver reset timer
+ */
+static void encReceiverResetCallback (void)
+{
+ m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_RXRST);
+ m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_RXEN); /* enable receive */
+}
+
+/*-----------------------------------------------------------------------------
+ * Check for received packets. Call NetReceive for each packet. The return
+ * value is ignored by the caller.
+ */
+int eth_rx (void)
+{
+ if (rxResetCounter > 0 && --rxResetCounter == 0) {
+ encReceiverResetCallback ();
+ }
+
+ encPoll ();
+
+ return 0;
+}
+
+void eth_halt (void)
+{
+ m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_RXEN); /* disable receive */
+}
+
+/*****************************************************************************/
+
+static void encPoll (void)
+{
+ unsigned char eir_reg;
+ volatile unsigned char estat_reg;
+ unsigned char pkt_cnt;
+
+#ifdef CONFIG_USE_IRQ
+ /* clear global interrupt enable bit in enc28j60 */
+ m_nic_bfc (CTL_REG_EIE, ENC_EIE_INTIE);
+#endif
+ estat_reg = m_nic_read (CTL_REG_ESTAT);
+
+ eir_reg = m_nic_read (CTL_REG_EIR);
+
+ if (eir_reg & ENC_EIR_TXIF) {
+ /* clear TXIF bit in EIR */
+ m_nic_bfc (CTL_REG_EIR, ENC_EIR_TXIF);
+ }
+
+ /* We have to use pktcnt and not pktif bit, see errata pt. 6 */
+
+ /* move to bank 1 */
+ m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL1);
+ m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL0);
+
+ /* read pktcnt */
+ pkt_cnt = m_nic_read (CTL_REG_EPKTCNT);
+
+ if (pkt_cnt > 0) {
+ if ((eir_reg & ENC_EIR_PKTIF) == 0) {
+ /*printf("encPoll: pkt cnt > 0, but pktif not set\n"); */
+ }
+ encRx ();
+ /* clear PKTIF bit in EIR, this should not need to be done but it
+ seems like we get problems if we do not */
+ m_nic_bfc (CTL_REG_EIR, ENC_EIR_PKTIF);
+ }
+
+ if (eir_reg & ENC_EIR_RXERIF) {
+ printf ("encPoll: rx error\n");
+ m_nic_bfc (CTL_REG_EIR, ENC_EIR_RXERIF);
+ }
+ if (eir_reg & ENC_EIR_TXERIF) {
+ printf ("encPoll: tx error\n");
+ m_nic_bfc (CTL_REG_EIR, ENC_EIR_TXERIF);
+ }
+
+#ifdef CONFIG_USE_IRQ
+ /* set global interrupt enable bit in enc28j60 */
+ m_nic_bfs (CTL_REG_EIE, ENC_EIE_INTIE);
+#endif
+}
+
+static void encRx (void)
+{
+ unsigned short pkt_len;
+ unsigned short copy_len;
+ unsigned short status;
+ unsigned char eir_reg;
+ unsigned char pkt_cnt = 0;
+ unsigned short rxbuf_rdpt;
+
+ /* switch to bank 0 */
+ m_nic_bfc (CTL_REG_ECON1, (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0));
+
+ m_nic_write (CTL_REG_ERDPTL, next_pointer_lsb);
+ m_nic_write (CTL_REG_ERDPTH, next_pointer_msb);
+
+ do {
+ m_nic_read_data (6, buffer);
+ next_pointer_lsb = buffer[0];
+ next_pointer_msb = buffer[1];
+ pkt_len = buffer[2];
+ pkt_len |= (unsigned short) buffer[3] << 8;
+ status = buffer[4];
+ status |= (unsigned short) buffer[5] << 8;
+
+ if (pkt_len <= ENC_MAX_FRM_LEN)
+ copy_len = pkt_len;
+ else
+ copy_len = 0;
+
+ if ((status & (1L << 7)) == 0) /* check Received Ok bit */
+ copy_len = 0;
+
+ /* taken from the Linux driver */
+ /* check if next pointer is resonable */
+ if ((((unsigned int)next_pointer_msb << 8) |
+ (unsigned int)next_pointer_lsb) >= ENC_TX_BUF_START)
+ copy_len = 0;
+
+ if (copy_len > 0) {
+ m_nic_read_data (copy_len, buffer);
+ }
+
+ /* advance read pointer to next pointer */
+ m_nic_write (CTL_REG_ERDPTL, next_pointer_lsb);
+ m_nic_write (CTL_REG_ERDPTH, next_pointer_msb);
+
+ /* decrease packet counter */
+ m_nic_bfs (CTL_REG_ECON2, ENC_ECON2_PKTDEC);
+
+ /* taken from the Linux driver */
+ /* Only odd values should be written to ERXRDPTL,
+ * see errata B4 pt.13
+ */
+ rxbuf_rdpt = (next_pointer_msb << 8 | next_pointer_lsb) - 1;
+ if ((rxbuf_rdpt < (m_nic_read(CTL_REG_ERXSTH) << 8 |
+ m_nic_read(CTL_REG_ERXSTL))) || (rxbuf_rdpt >
+ (m_nic_read(CTL_REG_ERXNDH) << 8 |
+ m_nic_read(CTL_REG_ERXNDL)))) {
+ m_nic_write(CTL_REG_ERXRDPTL, m_nic_read(CTL_REG_ERXNDL));
+ m_nic_write(CTL_REG_ERXRDPTH, m_nic_read(CTL_REG_ERXNDH));
+ } else {
+ m_nic_write(CTL_REG_ERXRDPTL, rxbuf_rdpt & 0xFF);
+ m_nic_write(CTL_REG_ERXRDPTH, rxbuf_rdpt >> 8);
+ }
+
+ /* move to bank 1 */
+ m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL1);
+ m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL0);
+
+ /* read pktcnt */
+ pkt_cnt = m_nic_read (CTL_REG_EPKTCNT);
+
+ /* switch to bank 0 */
+ m_nic_bfc (CTL_REG_ECON1,
+ (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0));
+
+ if (copy_len == 0) {
+ eir_reg = m_nic_read (CTL_REG_EIR);
+ encReceiverReset ();
+ printf ("eth_rx: copy_len=0\n");
+ continue;
+ }
+
+ NetReceive ((unsigned char *) buffer, pkt_len);
+
+ eir_reg = m_nic_read (CTL_REG_EIR);
+ } while (pkt_cnt); /* Use EPKTCNT not EIR.PKTIF flag, see errata pt. 6 */
+}
+
+static void encWriteReg (unsigned char regNo, unsigned char data)
+{
+ spi_lock ();
+ enc_cfg_spi ();
+ enc_enable ();
+
+ spi_write (0x40 | regNo); /* write in regNo */
+ spi_write (data);
+
+ enc_disable ();
+ enc_enable ();
+
+ spi_write (0x1f); /* write reg 0x1f */
+
+ enc_disable ();
+ spi_unlock ();
+}
+
+static void encWriteRegRetry (unsigned char regNo, unsigned char data, int c)
+{
+ unsigned char readback;
+ int i;
+
+ spi_lock ();
+
+ for (i = 0; i < c; i++) {
+ enc_cfg_spi ();
+ enc_enable ();
+
+ spi_write (0x40 | regNo); /* write in regNo */
+ spi_write (data);
+
+ enc_disable ();
+ enc_enable ();
+
+ spi_write (0x1f); /* write reg 0x1f */
+
+ enc_disable ();
+
+ spi_unlock (); /* we must unlock spi first */
+
+ readback = encReadReg (regNo);
+
+ spi_lock ();
+
+ if (readback == data)
+ break;
+ }
+ spi_unlock ();
+
+ if (i == c) {
+ printf ("enc28j60: write reg %d failed\n", regNo);
+ }
+}
+
+static unsigned char encReadReg (unsigned char regNo)
+{
+ unsigned char rxByte;
+
+ spi_lock ();
+ enc_cfg_spi ();
+ enc_enable ();
+
+ spi_write (0x1f); /* read reg 0x1f */
+
+ bank = spi_read () & 0x3;
+
+ enc_disable ();
+ enc_enable ();
+
+ spi_write (regNo);
+ rxByte = spi_read ();
+
+ /* check if MAC or MII register */
+ if (((bank == 2) && (regNo <= 0x1a)) ||
+ ((bank == 3) && (regNo <= 0x05 || regNo == 0x0a))) {
+ /* ignore first byte and read another byte */
+ rxByte = spi_read ();
+ }
+
+ enc_disable ();
+ spi_unlock ();
+
+ return rxByte;
+}
+
+static void encReadBuff (unsigned short length, unsigned char *pBuff)
+{
+ spi_lock ();
+ enc_cfg_spi ();
+ enc_enable ();
+
+ spi_write (0x20 | 0x1a); /* read buffer memory */
+
+ while (length--) {
+ if (pBuff != NULL)
+ *pBuff++ = spi_read ();
+ else
+ spi_write (0);
+ }
+
+ enc_disable ();
+ spi_unlock ();
+}
+
+static void encWriteBuff (unsigned short length, unsigned char *pBuff)
+{
+ spi_lock ();
+ enc_cfg_spi ();
+ enc_enable ();
+
+ spi_write (0x60 | 0x1a); /* write buffer memory */
+
+ spi_write (0x00); /* control byte */
+
+ while (length--)
+ spi_write (*pBuff++);
+
+ enc_disable ();
+ spi_unlock ();
+}
+
+static void encBitSet (unsigned char regNo, unsigned char data)
+{
+ spi_lock ();
+ enc_cfg_spi ();
+ enc_enable ();
+
+ spi_write (0x80 | regNo); /* bit field set */
+ spi_write (data);
+
+ enc_disable ();
+ spi_unlock ();
+}
+
+static void encBitClr (unsigned char regNo, unsigned char data)
+{
+ spi_lock ();
+ enc_cfg_spi ();
+ enc_enable ();
+
+ spi_write (0xA0 | regNo); /* bit field clear */
+ spi_write (data);
+
+ enc_disable ();
+ spi_unlock ();
+}
+
+static void encReset (void)
+{
+ spi_lock ();
+ enc_cfg_spi ();
+ enc_enable ();
+
+ spi_write (0xff); /* soft reset */
+
+ enc_disable ();
+ spi_unlock ();
+
+ /* sleep 1 ms. See errata pt. 2 */
+ udelay (1000);
+}
+
+static void encInit (unsigned char *pEthAddr)
+{
+ unsigned short phid1 = 0;
+ unsigned short phid2 = 0;
+
+ /* switch to bank 0 */
+ m_nic_bfc (CTL_REG_ECON1, (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0));
+
+ /*
+ * Setup the buffer space. The reset values are valid for the
+ * other pointers.
+ */
+ /* We shall not write to ERXST, see errata pt. 5. Instead we
+ have to make sure that ENC_RX_BUS_START is 0. */
+ m_nic_write_retry (CTL_REG_ERXSTL, (ENC_RX_BUF_START & 0xFF), 1);
+ m_nic_write_retry (CTL_REG_ERXSTH, (ENC_RX_BUF_START >> 8), 1);
+
+ /* taken from the Linux driver */
+ m_nic_write_retry (CTL_REG_ERXNDL, (ENC_RX_BUF_END & 0xFF), 1);
+ m_nic_write_retry (CTL_REG_ERXNDH, (ENC_RX_BUF_END >> 8), 1);
+
+ m_nic_write_retry (CTL_REG_ERDPTL, (ENC_RX_BUF_START & 0xFF), 1);
+ m_nic_write_retry (CTL_REG_ERDPTH, (ENC_RX_BUF_START >> 8), 1);
+
+ next_pointer_lsb = (ENC_RX_BUF_START & 0xFF);
+ next_pointer_msb = (ENC_RX_BUF_START >> 8);
+
+ /* verify identification */
+ phid1 = phyRead (PHY_REG_PHID1);
+ phid2 = phyRead (PHY_REG_PHID2);
+
+ if (phid1 != ENC_PHID1_VALUE
+ || (phid2 & ENC_PHID2_MASK) != ENC_PHID2_VALUE) {
+ printf ("ERROR: failed to identify controller\n");
+ printf ("phid1 = %x, phid2 = %x\n",
+ phid1, (phid2 & ENC_PHID2_MASK));
+ printf ("should be phid1 = %x, phid2 = %x\n",
+ ENC_PHID1_VALUE, ENC_PHID2_VALUE);
+ }
+
+ /*
+ * --- MAC Initialization ---
+ */
+
+ /* Pull MAC out of Reset */
+
+ /* switch to bank 2 */
+ m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL0);
+ m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL1);
+
+ /* enable MAC to receive frames */
+ /* added some bits from the Linux driver */
+ m_nic_write_retry (CTL_REG_MACON1
+ ,(ENC_MACON1_MARXEN | ENC_MACON1_TXPAUS | ENC_MACON1_RXPAUS)
+ ,10);
+
+ /* configure pad, tx-crc and duplex */
+ /* added a bit from the Linux driver */
+ m_nic_write_retry (CTL_REG_MACON3
+ ,(ENC_MACON3_PADCFG0 | ENC_MACON3_TXCRCEN | ENC_MACON3_FRMLNEN)
+ ,10);
+
+ /* added 4 new lines from the Linux driver */
+ /* Allow infinite deferals if the medium is continously busy */
+ m_nic_write_retry(CTL_REG_MACON4, (1<<6) /*ENC_MACON4_DEFER*/, 10);
+
+ /* Late collisions occur beyond 63 bytes */
+ m_nic_write_retry(CTL_REG_MACLCON2, 63, 10);
+
+ /* Set (low byte) Non-Back-to_Back Inter-Packet Gap. Recommended 0x12 */
+ m_nic_write_retry(CTL_REG_MAIPGL, 0x12, 10);
+
+ /*
+ * Set (high byte) Non-Back-to_Back Inter-Packet Gap. Recommended
+ * 0x0c for half-duplex. Nothing for full-duplex
+ */
+ m_nic_write_retry(CTL_REG_MAIPGH, 0x0C, 10);
+
+ /* set maximum frame length */
+ m_nic_write_retry (CTL_REG_MAMXFLL, (ENC_MAX_FRM_LEN & 0xff), 10);
+ m_nic_write_retry (CTL_REG_MAMXFLH, (ENC_MAX_FRM_LEN >> 8), 10);
+
+ /*
+ * Set MAC back-to-back inter-packet gap. Recommended 0x12 for half duplex
+ * and 0x15 for full duplex.
+ */
+ m_nic_write_retry (CTL_REG_MABBIPG, 0x12, 10);
+
+ /* set MAC address */
+
+ /* switch to bank 3 */
+ m_nic_bfs (CTL_REG_ECON1, (ENC_ECON1_BSEL0 | ENC_ECON1_BSEL1));
+
+ m_nic_write_retry (CTL_REG_MAADR0, pEthAddr[5], 1);
+ m_nic_write_retry (CTL_REG_MAADR1, pEthAddr[4], 1);
+ m_nic_write_retry (CTL_REG_MAADR2, pEthAddr[3], 1);
+ m_nic_write_retry (CTL_REG_MAADR3, pEthAddr[2], 1);
+ m_nic_write_retry (CTL_REG_MAADR4, pEthAddr[1], 1);
+ m_nic_write_retry (CTL_REG_MAADR5, pEthAddr[0], 1);
+
+ /*
+ * PHY Initialization taken from the Linux driver
+ */
+
+ /* Prevent automatic loopback of data beeing transmitted by setting
+ ENC_PHCON2_HDLDIS */
+ phyWrite(PHY_REG_PHCON2, (1<<8));
+
+ /* LEDs configuration
+ * LEDA: LACFG = 0100 -> display link status
+ * LEDB: LBCFG = 0111 -> display TX & RX activity
+ * STRCH = 1 -> LED pulses
+ */
+ phyWrite(PHY_REG_PHLCON, 0x0472);
+
+ /* Reset PDPXMD-bit => half duplex */
+ phyWrite(PHY_REG_PHCON1, 0);
+
+ /*
+ * Receive settings
+ */
+
+#ifdef CONFIG_USE_IRQ
+ /* enable interrupts */
+ m_nic_bfs (CTL_REG_EIE, ENC_EIE_PKTIE);
+ m_nic_bfs (CTL_REG_EIE, ENC_EIE_TXIE);
+ m_nic_bfs (CTL_REG_EIE, ENC_EIE_RXERIE);
+ m_nic_bfs (CTL_REG_EIE, ENC_EIE_TXERIE);
+ m_nic_bfs (CTL_REG_EIE, ENC_EIE_INTIE);
+#endif
+}
+
+/*****************************************************************************
+ *
+ * Description:
+ * Read PHY registers.
+ *
+ * NOTE! This function will change to Bank 2.
+ *
+ * Params:
+ * [in] addr address of the register to read
+ *
+ * Returns:
+ * The value in the register
+ */
+static unsigned short phyRead (unsigned char addr)
+{
+ unsigned short ret = 0;
+
+ /* move to bank 2 */
+ m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL0);
+ m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL1);
+
+ /* write address to MIREGADR */
+ m_nic_write (CTL_REG_MIREGADR, addr);
+
+ /* set MICMD.MIIRD */
+ m_nic_write (CTL_REG_MICMD, ENC_MICMD_MIIRD);
+
+ /* taken from the Linux driver */
+ /* move to bank 3 */
+ m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL0);
+ m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1);
+
+ /* poll MISTAT.BUSY bit until operation is complete */
+ while ((m_nic_read (CTL_REG_MISTAT) & ENC_MISTAT_BUSY) != 0) {
+ static int cnt = 0;
+
+ if (cnt++ >= 1000) {
+ /* GJ - this seems extremely dangerous! */
+ /* printf("#"); */
+ cnt = 0;
+ }
+ }
+
+ /* taken from the Linux driver */
+ /* move to bank 2 */
+ m_nic_bfc(CTL_REG_ECON1, ENC_ECON1_BSEL0);
+ m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1);
+
+ /* clear MICMD.MIIRD */
+ m_nic_write (CTL_REG_MICMD, 0);
+
+ ret = (m_nic_read (CTL_REG_MIRDH) << 8);
+ ret |= (m_nic_read (CTL_REG_MIRDL) & 0xFF);
+
+ return ret;
+}
+
+/*****************************************************************************
+ *
+ * Taken from the Linux driver.
+ * Description:
+ * Write PHY registers.
+ *
+ * NOTE! This function will change to Bank 3.
+ *
+ * Params:
+ * [in] addr address of the register to write to
+ * [in] data to be written
+ *
+ * Returns:
+ * None
+ */
+static void phyWrite(unsigned char addr, unsigned short data)
+{
+ /* move to bank 2 */
+ m_nic_bfc(CTL_REG_ECON1, ENC_ECON1_BSEL0);
+ m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1);
+
+ /* write address to MIREGADR */
+ m_nic_write(CTL_REG_MIREGADR, addr);
+
+ m_nic_write(CTL_REG_MIWRL, data & 0xff);
+ m_nic_write(CTL_REG_MIWRH, data >> 8);
+
+ /* move to bank 3 */
+ m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL0);
+ m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1);
+
+ /* poll MISTAT.BUSY bit until operation is complete */
+ while((m_nic_read(CTL_REG_MISTAT) & ENC_MISTAT_BUSY) != 0) {
+ static int cnt = 0;
+
+ if(cnt++ >= 1000) {
+ cnt = 0;
+ }
+ }
+}
diff --git a/drivers/net/mpc5xxx_fec.c b/drivers/net/mpc5xxx_fec.c
index c88e596..bc8c922 100644
--- a/drivers/net/mpc5xxx_fec.c
+++ b/drivers/net/mpc5xxx_fec.c
@@ -250,6 +250,13 @@ static int mpc5xxx_fec_init(struct eth_device *dev, bd_t * bis)
mpc5xxx_fec_init_phy(dev, bis);
/*
+ * Call board-specific PHY fixups (if any)
+ */
+#ifdef CONFIG_RESET_PHY_R
+ reset_phy();
+#endif
+
+ /*
* Initialize RxBD/TxBD rings
*/
mpc5xxx_fec_rbd_init(fec);
diff --git a/drivers/net/smc91111.c b/drivers/net/smc91111.c
index 54a1bfb..ba9c67e 100644
--- a/drivers/net/smc91111.c
+++ b/drivers/net/smc91111.c
@@ -654,6 +654,28 @@ again:
return length;
}
+static int smc_write_hwaddr(struct eth_device *dev)
+{
+ int i;
+
+ swap_to(ETHERNET);
+ SMC_SELECT_BANK (dev, 1);
+#ifdef USE_32_BIT
+ for (i = 0; i < 6; i += 2) {
+ word address;
+
+ address = dev->enetaddr[i + 1] << 8;
+ address |= dev->enetaddr[i];
+ SMC_outw(dev, address, (ADDR0_REG + i));
+ }
+#else
+ for (i = 0; i < 6; i++)
+ SMC_outb(dev, dev->enetaddr[i], (ADDR0_REG + i));
+#endif
+ swap_to(FLASH);
+ return 0;
+}
+
/*
* Open and Initialize the board
*
@@ -662,8 +684,6 @@ again:
*/
static int smc_init(struct eth_device *dev, bd_t *bd)
{
- int i;
-
swap_to(ETHERNET);
PRINTK2 ("%s: smc_init\n", SMC_DEV_NAME);
@@ -680,20 +700,6 @@ static int smc_init(struct eth_device *dev, bd_t *bd)
/* conservative setting (10Mbps, HalfDuplex, no AutoNeg.) */
/* SMC_SELECT_BANK(dev, 0); */
/* SMC_outw(dev, 0, RPC_REG); */
- SMC_SELECT_BANK (dev, 1);
-
-#ifdef USE_32_BIT
- for (i = 0; i < 6; i += 2) {
- word address;
-
- address = dev->enetaddr[i + 1] << 8;
- address |= dev->enetaddr[i];
- SMC_outw(dev, address, (ADDR0_REG + i));
- }
-#else
- for (i = 0; i < 6; i++)
- SMC_outb(dev, dev->enetaddr[i], (ADDR0_REG + i));
-#endif
printf(SMC_DEV_NAME ": MAC %pM\n", dev->enetaddr);
@@ -1360,6 +1366,7 @@ int smc91111_initialize(u8 dev_num, int base_addr)
return 0;
}
+ memset(dev, 0, sizeof(*dev));
priv->dev_num = dev_num;
dev->priv = priv;
dev->iobase = base_addr;
@@ -1374,6 +1381,7 @@ int smc91111_initialize(u8 dev_num, int base_addr)
dev->halt = smc_halt;
dev->send = smc_send;
dev->recv = smc_rcv;
+ dev->write_hwaddr = smc_write_hwaddr;
sprintf(dev->name, "%s-%hu", SMC_DEV_NAME, dev_num);
eth_register(dev);
diff --git a/drivers/net/xilinx_emaclite.c b/drivers/net/xilinx_emaclite.c
index 0820daa..76af939 100644
--- a/drivers/net/xilinx_emaclite.c
+++ b/drivers/net/xilinx_emaclite.c
@@ -26,6 +26,7 @@
#include <common.h>
#include <net.h>
#include <config.h>
+#include <malloc.h>
#include <asm/io.h>
#undef DEBUG
@@ -63,26 +64,19 @@
#define XEL_RSR_RECV_IE_MASK 0x00000008UL
typedef struct {
- unsigned int baseaddress; /* Base address for device (IPIF) */
- unsigned int nexttxbuffertouse; /* Next TX buffer to write to */
- unsigned int nextrxbuffertouse; /* Next RX buffer to read from */
- unsigned char deviceid; /* Unique ID of device - for future */
+ u32 baseaddress; /* Base address for device (IPIF) */
+ u32 nexttxbuffertouse; /* Next TX buffer to write to */
+ u32 nextrxbuffertouse; /* Next RX buffer to read from */
+ uchar deviceid; /* Unique ID of device - for future */
} xemaclite;
static xemaclite emaclite;
static u32 etherrxbuff[PKTSIZE_ALIGN/4]; /* Receive buffer */
-/* hardcoded MAC address for the Xilinx EMAC Core when env is nowhere*/
-#ifdef CONFIG_ENV_IS_NOWHERE
-static u8 emacaddr[ENET_ADDR_LENGTH] = { 0x00, 0x0a, 0x35, 0x00, 0x22, 0x01 };
-#else
-static u8 emacaddr[ENET_ADDR_LENGTH];
-#endif
-
-void xemaclite_alignedread (u32 * srcptr, void *destptr, unsigned bytecount)
+static void xemaclite_alignedread (u32 *srcptr, void *destptr, u32 bytecount)
{
- unsigned int i;
+ u32 i;
u32 alignbuffer;
u32 *to32ptr;
u32 *from32ptr;
@@ -107,9 +101,9 @@ void xemaclite_alignedread (u32 * srcptr, void *destptr, unsigned bytecount)
}
}
-void xemaclite_alignedwrite (void *srcptr, u32 destptr, unsigned bytecount)
+static void xemaclite_alignedwrite (void *srcptr, u32 destptr, u32 bytecount)
{
- unsigned i;
+ u32 i;
u32 alignbuffer;
u32 *to32ptr = (u32 *) destptr;
u32 *from32ptr;
@@ -134,23 +128,16 @@ void xemaclite_alignedwrite (void *srcptr, u32 destptr, unsigned bytecount)
*to32ptr++ = alignbuffer;
}
-void eth_halt (void)
+static void emaclite_halt(struct eth_device *dev)
{
debug ("eth_halt\n");
}
-int eth_init (bd_t * bis)
+static int emaclite_init(struct eth_device *dev, bd_t *bis)
{
- uchar enetaddr[6];
-
debug ("EmacLite Initialization Started\n");
memset (&emaclite, 0, sizeof (xemaclite));
- emaclite.baseaddress = XILINX_EMACLITE_BASEADDR;
-
- if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {
- memcpy(enetaddr, emacaddr, ENET_ADDR_LENGTH);
- eth_setenv_enetaddr("ethaddr", enetaddr);
- }
+ emaclite.baseaddress = dev->iobase;
/*
* TX - TX_PING & TX_PONG initialization
@@ -158,7 +145,7 @@ int eth_init (bd_t * bis)
/* Restart PING TX */
out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET, 0);
/* Copy MAC address */
- xemaclite_alignedwrite (enetaddr,
+ xemaclite_alignedwrite (dev->enetaddr,
emaclite.baseaddress, ENET_ADDR_LENGTH);
/* Set the length */
out_be32 (emaclite.baseaddress + XEL_TPLR_OFFSET, ENET_ADDR_LENGTH);
@@ -171,7 +158,7 @@ int eth_init (bd_t * bis)
#ifdef CONFIG_XILINX_EMACLITE_TX_PING_PONG
/* The same operation with PONG TX */
out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET + XEL_BUFFER_OFFSET, 0);
- xemaclite_alignedwrite (enetaddr, emaclite.baseaddress +
+ xemaclite_alignedwrite (dev->enetaddr, emaclite.baseaddress +
XEL_BUFFER_OFFSET, ENET_ADDR_LENGTH);
out_be32 (emaclite.baseaddress + XEL_TPLR_OFFSET, ENET_ADDR_LENGTH);
out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET + XEL_BUFFER_OFFSET,
@@ -194,7 +181,7 @@ int eth_init (bd_t * bis)
return 0;
}
-int xemaclite_txbufferavailable (xemaclite * instanceptr)
+static int xemaclite_txbufferavailable (xemaclite *instanceptr)
{
u32 reg;
u32 txpingbusy;
@@ -216,12 +203,12 @@ int xemaclite_txbufferavailable (xemaclite * instanceptr)
return (!(txpingbusy && txpongbusy));
}
-int eth_send (volatile void *ptr, int len) {
-
- unsigned int reg;
- unsigned int baseaddress;
+static int emaclite_send (struct eth_device *dev, volatile void *ptr, int len)
+{
+ u32 reg;
+ u32 baseaddress;
- unsigned maxtry = 1000;
+ u32 maxtry = 1000;
if (len > ENET_MAX_MTU)
len = ENET_MAX_MTU;
@@ -293,11 +280,11 @@ int eth_send (volatile void *ptr, int len) {
return 0;
}
-int eth_rx (void)
+static int emaclite_recv(struct eth_device *dev)
{
- unsigned int length;
- unsigned int reg;
- unsigned int baseaddress;
+ u32 length;
+ u32 reg;
+ u32 baseaddress;
baseaddress = emaclite.baseaddress + emaclite.nextrxbuffertouse;
reg = in_be32 (baseaddress + XEL_RSR_OFFSET);
@@ -322,7 +309,7 @@ int eth_rx (void)
#endif
}
/* Get the length of the frame that arrived */
- switch(((in_be32 (baseaddress + XEL_RXBUFF_OFFSET + 0xC)) &
+ switch(((ntohl(in_be32 (baseaddress + XEL_RXBUFF_OFFSET + 0xC))) &
0xFFFF0000 ) >> 16) {
case 0x806:
length = 42 + 20; /* FIXME size of ARP */
@@ -330,7 +317,7 @@ int eth_rx (void)
break;
case 0x800:
length = 14 + 14 +
- (((in_be32 (baseaddress + XEL_RXBUFF_OFFSET + 0x10)) &
+ (((ntohl(in_be32 (baseaddress + XEL_RXBUFF_OFFSET + 0x10))) &
0xFFFF0000) >> 16); /* FIXME size of IP packet */
debug ("IP Packet\n");
break;
@@ -353,3 +340,26 @@ int eth_rx (void)
return 1;
}
+
+int xilinx_emaclite_initialize (bd_t *bis, int base_addr)
+{
+ struct eth_device *dev;
+
+ dev = malloc(sizeof(*dev));
+ if (dev == NULL)
+ hang();
+
+ memset(dev, 0, sizeof(*dev));
+ sprintf(dev->name, "Xilinx_Emaclite");
+
+ dev->iobase = base_addr;
+ dev->priv = 0;
+ dev->init = emaclite_init;
+ dev->halt = emaclite_halt;
+ dev->send = emaclite_send;
+ dev->recv = emaclite_recv;
+
+ eth_register(dev);
+
+ return 0;
+}
diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c
index e10c0f3..48033d7 100644
--- a/drivers/qe/uec.c
+++ b/drivers/qe/uec.c
@@ -1223,8 +1223,10 @@ static int uec_init(struct eth_device* dev, bd_t *bd)
i = 50;
do {
err = curphy->read_status(uec->mii_info);
+ if (!(((i-- > 0) && !uec->mii_info->link) || err))
+ break;
udelay(100000);
- } while (((i-- > 0) && !uec->mii_info->link) || err);
+ } while (1);
if (err || i <= 0)
printf("warning: %s: timeout on PHY link\n", dev->name);
diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c
index 2d3a896..9be784e 100644
--- a/drivers/qe/uec_phy.c
+++ b/drivers/qe/uec_phy.c
@@ -351,6 +351,15 @@ static int marvell_config_aneg (struct uec_mii_info *mii_info)
static int genmii_config_aneg (struct uec_mii_info *mii_info)
{
if (mii_info->autoneg) {
+ /* Speed up the common case, if link is already up, speed and
+ duplex match, skip auto neg as it already matches */
+ if (!genmii_read_status(mii_info) && mii_info->link)
+ if (mii_info->duplex == DUPLEX_FULL &&
+ mii_info->speed == SPEED_100)
+ if (mii_info->advertising &
+ ADVERTISED_100baseT_Full)
+ return 0;
+
config_genmii_advert (mii_info);
genmii_restart_aneg (mii_info);
} else
@@ -389,7 +398,6 @@ static int genmii_update_link (struct uec_mii_info *mii_info)
status = phy_read(mii_info, PHY_BMSR);
}
mii_info->link = 1;
- udelay(500000); /* another 500 ms (results in faster booting) */
} else {
if (status & PHY_BMSR_LS)
mii_info->link = 1;
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index bc6480c..b22ca90 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -1276,9 +1276,6 @@ static void rx_complete(struct usb_ep *ep, struct usb_request *req)
debug("%s: status %d\n", __func__, req->status);
packet_received = 1;
-
- if (req)
- dev->rx_req = req;
}
static int alloc_requests(struct eth_dev *dev, unsigned n, gfp_t gfp_flags)
@@ -1287,16 +1284,18 @@ static int alloc_requests(struct eth_dev *dev, unsigned n, gfp_t gfp_flags)
dev->tx_req = usb_ep_alloc_request(dev->in_ep, 0);
if (!dev->tx_req)
- goto fail;
+ goto fail1;
dev->rx_req = usb_ep_alloc_request(dev->out_ep, 0);
if (!dev->rx_req)
- goto fail;
+ goto fail2;
return 0;
-fail:
+fail2:
+ usb_ep_free_request(dev->in_ep, dev->tx_req);
+fail1:
error("can't alloc requests");
return -1;
}
@@ -1791,8 +1790,6 @@ static int usb_eth_init(struct eth_device *netdev, bd_t *bd)
}
dev->network_started = 0;
- dev->tx_req = NULL;
- dev->rx_req = NULL;
packet_received = 0;
packet_sent = 0;
@@ -1813,6 +1810,7 @@ static int usb_eth_init(struct eth_device *netdev, bd_t *bd)
usb_gadget_handle_interrupts();
}
+ packet_received = 0;
rx_submit(dev, dev->rx_req, 0);
return 0;
fail:
@@ -1823,15 +1821,13 @@ static int usb_eth_send(struct eth_device *netdev,
volatile void *packet, int length)
{
int retval;
- struct usb_request *req = NULL;
struct eth_dev *dev = &l_ethdev;
+ struct usb_request *req = dev->tx_req;
unsigned long ts;
unsigned long timeout = USB_CONNECT_TIMEOUT;
debug("%s:...\n", __func__);
- req = dev->tx_req;
-
req->buf = (void *)packet;
req->context = NULL;
req->complete = tx_complete;
@@ -1883,8 +1879,7 @@ static int usb_eth_recv(struct eth_device *netdev)
NetReceive(NetRxPackets[0], dev->rx_req->length);
packet_received = 0;
- if (dev->rx_req)
- rx_submit(dev, dev->rx_req, 0);
+ rx_submit(dev, dev->rx_req, 0);
} else
error("dev->rx_req invalid");
}
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 3f76c4e..d246978 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1529,7 +1529,7 @@ int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
if (usb_pipebulk(pipe))
timeout = BULK_TO;
else
- timeout = 100;
+ timeout = 1000;
/* wait for it to complete */
for (;;) {
diff --git a/drivers/usb/musb/musb_hcd.c b/drivers/usb/musb/musb_hcd.c
index af989aa..f38b279 100644
--- a/drivers/usb/musb/musb_hcd.c
+++ b/drivers/usb/musb/musb_hcd.c
@@ -144,19 +144,28 @@ static void write_toggle(struct usb_device *dev, u8 ep, u8 dir_out)
u16 csr;
if (dir_out) {
- if (!toggle)
- writew(MUSB_TXCSR_CLRDATATOG, &musbr->txcsr);
- else {
- csr = readw(&musbr->txcsr);
+ csr = readw(&musbr->txcsr);
+ if (!toggle) {
+ if (csr & MUSB_TXCSR_MODE)
+ csr = MUSB_TXCSR_CLRDATATOG;
+ else
+ csr = 0;
+ writew(csr, &musbr->txcsr);
+ } else {
csr |= MUSB_TXCSR_H_WR_DATATOGGLE;
writew(csr, &musbr->txcsr);
csr |= (toggle << MUSB_TXCSR_H_DATATOGGLE_SHIFT);
writew(csr, &musbr->txcsr);
}
} else {
- if (!toggle)
- writew(MUSB_RXCSR_CLRDATATOG, &musbr->rxcsr);
- else {
+ if (!toggle) {
+ csr = readw(&musbr->txcsr);
+ if (csr & MUSB_TXCSR_MODE)
+ csr = MUSB_RXCSR_CLRDATATOG;
+ else
+ csr = 0;
+ writew(csr, &musbr->rxcsr);
+ } else {
csr = readw(&musbr->rxcsr);
csr |= MUSB_RXCSR_H_WR_DATATOGGLE;
writew(csr, &musbr->rxcsr);
diff --git a/examples/standalone/Makefile b/examples/standalone/Makefile
index 5f1f800..c2dd514 100644
--- a/examples/standalone/Makefile
+++ b/examples/standalone/Makefile
@@ -82,6 +82,11 @@ CFLAGS := $(filter-out $(RELFLAGS),$(CFLAGS))
CPPFLAGS := $(filter-out $(RELFLAGS),$(CPPFLAGS))
endif
+# We don't want gcc reordering functions if possible. This ensures that an
+# application's entry point will be the first function in the application's
+# source file.
+CFLAGS += $(call cc-option,-fno-toplevel-reorder)
+
all: $(obj).depend $(OBJS) $(LIB) $(SREC) $(BIN) $(ELF)
#########################################################################
diff --git a/fs/fat/fat.c b/fs/fat/fat.c
index 003666e..744e961 100644
--- a/fs/fat/fat.c
+++ b/fs/fat/fat.c
@@ -439,11 +439,19 @@ get_vfatname (fsdata *mydata, int curclust, __u8 *cluster,
{
dir_entry *realdent;
dir_slot *slotptr = (dir_slot *)retdent;
- __u8 *nextclust = cluster + mydata->clust_size * SECTOR_SIZE;
+ __u8 *buflimit = cluster + ((curclust == 0) ?
+ LINEAR_PREFETCH_SIZE :
+ (mydata->clust_size * SECTOR_SIZE)
+ );
__u8 counter = (slotptr->id & ~LAST_LONG_ENTRY_MASK) & 0xff;
int idx = 0;
- while ((__u8 *)slotptr < nextclust) {
+ if (counter > VFAT_MAXSEQ) {
+ debug("Error: VFAT name is too long\n");
+ return -1;
+ }
+
+ while ((__u8 *)slotptr < buflimit) {
if (counter == 0)
break;
if (((slotptr->id & ~LAST_LONG_ENTRY_MASK) & 0xff) != counter)
@@ -452,10 +460,11 @@ get_vfatname (fsdata *mydata, int curclust, __u8 *cluster,
counter--;
}
- if ((__u8 *)slotptr >= nextclust) {
+ if ((__u8 *)slotptr >= buflimit) {
dir_slot *slotptr2;
- slotptr--;
+ if (curclust == 0)
+ return -1;
curclust = get_fatent(mydata, curclust);
if (CHECK_CLUST(curclust, mydata->fatsize)) {
debug("curclust: 0x%x\n", curclust);
@@ -470,14 +479,19 @@ get_vfatname (fsdata *mydata, int curclust, __u8 *cluster,
}
slotptr2 = (dir_slot *)get_vfatname_block;
- while (slotptr2->id > 0x01)
+ while (counter > 0) {
+ if (((slotptr2->id & ~LAST_LONG_ENTRY_MASK)
+ & 0xff) != counter)
+ return -1;
slotptr2++;
+ counter--;
+ }
/* Save the real directory entry */
- realdent = (dir_entry *)slotptr2 + 1;
- while ((__u8 *)slotptr2 >= get_vfatname_block) {
- slot2str(slotptr2, l_name, &idx);
+ realdent = (dir_entry *)slotptr2;
+ while ((__u8 *)slotptr2 > get_vfatname_block) {
slotptr2--;
+ slot2str(slotptr2, l_name, &idx);
}
} else {
/* Save the real directory entry */
@@ -549,7 +563,7 @@ static dir_entry *get_dentfromdir (fsdata *mydata, int startsect,
dentptr = (dir_entry *)get_dentfromdir_block;
for (i = 0; i < DIRENTSPERCLUST; i++) {
- char s_name[14], l_name[256];
+ char s_name[14], l_name[VFAT_MAXLEN_BYTES];
l_name[0] = '\0';
if (dentptr->name[0] == DELETED_FLAG) {
@@ -841,7 +855,11 @@ do_fat_read (const char *filename, void *buffer, unsigned long maxsize,
debug("FAT read sect=%d, clust_size=%d, DIRENTSPERBLOCK=%d\n",
cursect, mydata->clust_size, DIRENTSPERBLOCK);
- if (disk_read(cursect, mydata->clust_size, do_fat_read_block) < 0) {
+ if (disk_read(cursect,
+ (mydata->fatsize == 32) ?
+ (mydata->clust_size) :
+ LINEAR_PREFETCH_SIZE,
+ do_fat_read_block) < 0) {
debug("Error: reading rootdir block\n");
return -1;
}
@@ -849,9 +867,13 @@ do_fat_read (const char *filename, void *buffer, unsigned long maxsize,
dentptr = (dir_entry *) do_fat_read_block;
for (i = 0; i < DIRENTSPERBLOCK; i++) {
- char s_name[14], l_name[256];
+ char s_name[14], l_name[VFAT_MAXLEN_BYTES];
l_name[0] = '\0';
+ if (dentptr->name[0] == DELETED_FLAG) {
+ dentptr++;
+ continue;
+ }
if ((dentptr->attr & ATTR_VOLUME)) {
#ifdef CONFIG_SUPPORT_VFAT
if ((dentptr->attr & ATTR_VFAT) &&
@@ -859,7 +881,10 @@ do_fat_read (const char *filename, void *buffer, unsigned long maxsize,
prevcksum =
((dir_slot *)dentptr)->alias_checksum;
- get_vfatname(mydata, 0,
+ get_vfatname(mydata,
+ (mydata->fatsize == 32) ?
+ root_cluster :
+ 0,
do_fat_read_block,
dentptr, l_name);
diff --git a/include/config_cmd_all.h b/include/config_cmd_all.h
index 746bf18..cdc5ff1 100644
--- a/include/config_cmd_all.h
+++ b/include/config_cmd_all.h
@@ -70,6 +70,7 @@
#define CONFIG_CMD_PORTIO /* Port I/O */
#define CONFIG_CMD_REGINFO /* Register dump */
#define CONFIG_CMD_REISER /* Reiserfs support */
+#define CONFIG_CMD_RARP /* rarpboot support */
#define CONFIG_CMD_RUN /* run command in env variable */
#define CONFIG_CMD_SAVEENV /* saveenv */
#define CONFIG_CMD_SAVES /* save S record dump */
diff --git a/include/configs/SMN42.h b/include/configs/SMN42.h
index adb6ac5..ba3ada1 100644
--- a/include/configs/SMN42.h
+++ b/include/configs/SMN42.h
@@ -198,6 +198,6 @@
#define CONFIG_INITRD_TAG
#define CONFIG_MMC 1
/* we use this ethernet chip */
-#define CONFIG_ENC28J60
+#define CONFIG_ENC28J60_LPC2292
#endif /* __CONFIG_H */
diff --git a/include/configs/a4m072.h b/include/configs/a4m072.h
new file mode 100644
index 0000000..a54ab1d
--- /dev/null
+++ b/include/configs/a4m072.h
@@ -0,0 +1,387 @@
+/*
+ * (C) Copyright 2003-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2010
+ * Sergei Poselenov, Emcraft Systems, sposelenov@emcraft.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
+#define CONFIG_MPC5200 1 /* (more precisely a MPC5200 CPU) */
+#define CONFIG_A4M072 1 /* ... on A4M072 board */
+#define CONFIG_MPC5200_DDR 1 /* ... use DDR RAM */
+
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */
+
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#define CONFIG_HIGH_BATS 1 /* High BATs supported */
+
+/*
+ * Serial console configuration
+ */
+#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
+#define CONFIG_BAUDRATE 9600 /* ... at 9600 bps */
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
+/* define to enable silent console */
+#define CONFIG_SILENT_CONSOLE
+#define CONFIG_SYS_DEVICE_NULLDEV 1 /* include nulldev device */
+
+/*
+ * PCI Mapping:
+ * 0x40000000 - 0x4fffffff - PCI Memory
+ * 0x50000000 - 0x50ffffff - PCI IO Space
+ */
+#define CONFIG_PCI
+
+#if defined(CONFIG_PCI)
+#define CONFIG_PCI_PNP 1
+#define CONFIG_PCI_SCAN_SHOW 1
+#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1
+
+#define CONFIG_PCI_MEM_BUS 0x40000000
+#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
+#define CONFIG_PCI_MEM_SIZE 0x10000000
+
+#define CONFIG_PCI_IO_BUS 0x50000000
+#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
+#define CONFIG_PCI_IO_SIZE 0x01000000
+#endif
+
+#define CONFIG_SYS_XLB_PIPELINING 1
+
+#undef CONFIG_NET_MULTI
+#undef CONFIG_EEPRO100
+
+/* Partitions */
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+
+/* USB */
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_USB_STORAGE
+#define CONFIG_SYS_OHCI_BE_CONTROLLER
+#undef CONFIG_SYS_USB_OHCI_BOARD_INIT
+#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
+#define CONFIG_SYS_USB_OHCI_REGS_BASE MPC5XXX_USB
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME "mpc5200"
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15
+
+#define CONFIG_TIMESTAMP /* Print image info with timestamp */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DISPLAY
+
+#if defined(CONFIG_PCI)
+#define CONFIG_CMD_PCI
+#endif
+
+#if (TEXT_BASE == 0xFE000000) /* Boot low with 32 MB Flash */
+#define CONFIG_SYS_LOWBOOT 1
+#define CONFIG_SYS_LOWBOOT32 1
+#endif
+
+/*
+ * Autobooting
+ */
+#define CONFIG_BOOTDELAY 2 /* autoboot after 2 seconds */
+
+#define CONFIG_SYS_AUTOLOAD "n"
+
+#define CONFIG_AUTOBOOT_KEYED
+#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n", bootdelay
+#define CONFIG_AUTOBOOT_DELAY_STR "asdfg"
+
+#undef CONFIG_BOOTARGS
+#define CONFIG_PREBOOT "run try_update"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "bk=run add_mtd ; run add_consolespec ; bootm 200000\0" \
+ "cf1=diskboot 200000 0:1\0" \
+ "bootcmd_cf1=run bcf1\0" \
+ "bcf=setenv bootargs root=/dev/hda3\0" \
+ "bootcmd_nfs=run bnfs\0" \
+ "norargs=setenv bootargs root=/dev/mtdblock3 rootfstype=cramfs\0" \
+ "bootcmd_nor=cp.b ${kernel_addr} 200000 100000; run norargs addip; run bk\0" \
+ "bnfs=nfs 200000 ${rootpath}/boot/uImage ; run nfsargs addip ; run bk\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath}\0" \
+ "try_update=usb start;sleep 2;usb start;sleep 1;fatload usb 0 2F0000 PCPUUPDT 2FF;usb stop;source 2F0000\0" \
+ "env_addr=FE060000\0" \
+ "kernel_addr=FE100000\0" \
+ "rootfs_addr=FE200000\0" \
+ "add_mtd=setenv bootargs ${bootargs} mtdparts=phys_mapped_flash:384k(u),640k(e),1m(k),30m(r)\0" \
+ "bcf1=run cf1; run bcf; run addip; run bk\0" \
+ "add_consolespec=setenv bootargs ${bootargs} console=/dev/null quiet\0" \
+ "addip=if test \"${ethaddr}\" != \"00:00:00:00:00:00\" ; then if test -n ${ipaddr}; then setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off panic=1; fi ; fi\0" \
+ "hostname=CPUP0\0" \
+ "ethaddr=00:00:00:00:00:00\0" \
+ "netdev=eth0\0" \
+ "bootcmd=run bootcmd_nor\0" \
+ ""
+/*
+ * IPB Bus clocking configuration.
+ */
+#undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
+
+/*
+ * I2C configuration
+ */
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #1 or #2 */
+
+#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */
+#define CONFIG_SYS_I2C_SLAVE 0x7F
+
+/*
+ * EEPROM configuration
+ */
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 /* 1010010x */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
+#define CONFIG_SYS_EEPROM_WREN 1
+#define CONFIG_SYS_EEPROM_WP GPIO_PSC2_4
+
+/*
+ * Flash configuration
+ */
+#define CONFIG_SYS_FLASH_BASE 0xFE000000
+#define CONFIG_SYS_FLASH_SIZE 0x02000000
+#if !defined(CONFIG_SYS_LOWBOOT)
+#error "CONFIG_SYS_LOWBOOT not defined?"
+#else /* CONFIG_SYS_LOWBOOT */
+#if defined(CONFIG_SYS_LOWBOOT32)
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00060000)
+#endif
+#endif /* CONFIG_SYS_LOWBOOT */
+
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max num of sects on one chip */
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
+#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_CS0_START}
+
+/*
+ * Environment settings
+ */
+#define CONFIG_ENV_IS_IN_FLASH 1
+#define CONFIG_ENV_SIZE 0x10000
+#define CONFIG_ENV_SECT_SIZE 0x20000
+#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
+
+#define CONFIG_ENV_OVERWRITE 1
+
+/*
+ * Memory map
+ */
+#define CONFIG_SYS_MBAR 0xF0000000
+#define CONFIG_SYS_SDRAM_BASE 0x00000000
+#define CONFIG_SYS_DEFAULT_MBAR 0x80000000
+
+/* Use SRAM until RAM will be available */
+#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM
+#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used area in DPRAM */
+
+
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
+
+#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+# define CONFIG_SYS_RAMBOOT 1
+#endif
+
+#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */
+#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*
+ * Ethernet configuration
+ */
+#define CONFIG_MPC5xxx_FEC 1
+#define CONFIG_MPC5xxx_FEC_MII100
+/*
+ * Define CONFIG_MPC5xxx_FEC_MII10 to force FEC at 10Mb
+ */
+/* #define CONFIG_MPC5xxx_FEC_MII10 */
+#define CONFIG_PHY_ADDR 0x1f
+#define CONFIG_PHY_TYPE 0x79c874 /* AMD Phy Controller */
+
+/*
+ * GPIO configuration
+ */
+#define CONFIG_SYS_GPS_PORT_CONFIG 0x18000004
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_CMDLINE_EDITING 1
+#ifdef CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#endif
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
+
+#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
+
+#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
+
+#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+
+/*
+ * Various low-level settings
+ */
+#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
+#define CONFIG_SYS_HID0_FINAL HID0_ICE
+/* Flash at CSBoot, CS0 */
+#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
+#define CONFIG_SYS_BOOTCS_CFG 0x0002DD00
+#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE
+/* External SRAM at CS1 */
+#define CONFIG_SYS_CS1_START 0x62000000
+#define CONFIG_SYS_CS1_SIZE 0x00400000
+#define CONFIG_SYS_CS1_CFG 0x00009930
+#define CONFIG_SYS_SRAM_BASE CONFIG_SYS_CS1_START
+#define CONFIG_SYS_SRAM_SIZE CONFIG_SYS_CS1_SIZE
+/* LED display at CS7 */
+#define CONFIG_SYS_CS7_START 0x6a000000
+#define CONFIG_SYS_CS7_SIZE (64*1024)
+#define CONFIG_SYS_CS7_CFG 0x0000bf30
+
+#define CONFIG_SYS_CS_BURST 0x00000000
+#define CONFIG_SYS_CS_DEADCYCLE 0x33333003
+
+#define CONFIG_SYS_RESET_ADDRESS 0xff000000
+
+/*-----------------------------------------------------------------------
+ * USB stuff
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_USB_CLOCK 0x0001BBBB
+#define CONFIG_USB_CONFIG 0x00001000 /* 0x4000 for SE mode */
+
+/*-----------------------------------------------------------------------
+ * IDE/ATA stuff Supports IDE harddisk
+ *-----------------------------------------------------------------------
+ */
+
+#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */
+
+#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
+#undef CONFIG_IDE_LED /* LED for ide not supported */
+
+#define CONFIG_IDE_PREINIT
+
+#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
+#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 2 drives per IDE bus */
+
+#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
+
+#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA
+
+/* Offset for data I/O */
+#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060)
+
+/* Offset for normal register accesses */
+#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET)
+
+/* Offset for alternate registers */
+#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C)
+
+/* Interval between registers */
+#define CONFIG_SYS_ATA_STRIDE 4
+
+#define CONFIG_ATAPI 1
+
+/*-----------------------------------------------------------------------
+ * Open firmware flat tree support
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+
+#define OF_CPU "PowerPC,5200@0"
+#define OF_SOC "soc5200@f0000000"
+#define OF_TBCLK (bd->bi_busfreq / 4)
+#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000"
+
+/* Support for the 7-segment display */
+#define CONFIG_SYS_DISP_CHR_RAM CONFIG_SYS_CS7_START
+#define CONFIG_SHOW_ACTIVITY /* used for display realization */
+
+#define CONFIG_SHOW_BOOT_PROGRESS
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/hmi1001.h b/include/configs/hmi1001.h
index d40b7a9..8b0b773 100644
--- a/include/configs/hmi1001.h
+++ b/include/configs/hmi1001.h
@@ -352,6 +352,7 @@
/* Display addresses */
/*---------------------------------------------------------------------*/
+#define CONFIG_PDSP188x
#define CONFIG_SYS_DISP_CHR_RAM (CONFIG_SYS_DISPLAY_BASE + 0x38)
#define CONFIG_SYS_DISP_CWORD (CONFIG_SYS_DISPLAY_BASE + 0x30)
diff --git a/include/configs/lpc2292sodimm.h b/include/configs/lpc2292sodimm.h
index 7ce8d6d..65276a2 100644
--- a/include/configs/lpc2292sodimm.h
+++ b/include/configs/lpc2292sodimm.h
@@ -156,6 +156,6 @@
#define CONFIG_INITRD_TAG
#define CONFIG_MMC 1
/* we use this ethernet chip */
-#define CONFIG_ENC28J60
+#define CONFIG_ENC28J60_LPC2292
#endif /* __CONFIG_H */
diff --git a/include/configs/manroland/common.h b/include/configs/manroland/common.h
index 0224608..291b669 100644
--- a/include/configs/manroland/common.h
+++ b/include/configs/manroland/common.h
@@ -55,6 +55,11 @@
#define CONFIG_CMD_MII
#define CONFIG_CMD_SNTP
+/*
+ * 8-symbol LED display (can be accessed with 'display' command)
+ */
+#define CONFIG_PDSP188x
+
#define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */
/*
diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h
index 9b1569a..c30cc4c 100644
--- a/include/configs/microblaze-generic.h
+++ b/include/configs/microblaze-generic.h
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2007-2008 Michal Simek
+ * (C) Copyright 2007-2010 Michal Simek
*
* Michal SIMEK <monstr@monstr.eu>
*
@@ -27,31 +27,33 @@
#include "../board/xilinx/microblaze-generic/xparameters.h"
-#define CONFIG_MICROBLAZE 1 /* MicroBlaze CPU */
+/* MicroBlaze CPU */
+#define CONFIG_MICROBLAZE 1
#define MICROBLAZE_V5 1
/* uart */
#ifdef XILINX_UARTLITE_BASEADDR
- #define CONFIG_XILINX_UARTLITE
- #define CONFIG_SERIAL_BASE XILINX_UARTLITE_BASEADDR
- #define CONFIG_BAUDRATE XILINX_UARTLITE_BAUDRATE
- #define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE }
- #define CONSOLE_ARG "console=console=ttyUL0,115200\0"
+# define CONFIG_XILINX_UARTLITE
+# define CONFIG_SERIAL_BASE XILINX_UARTLITE_BASEADDR
+# define CONFIG_BAUDRATE XILINX_UARTLITE_BAUDRATE
+# define CONFIG_SYS_BAUDRATE_TABLE { CONFIG_BAUDRATE }
+# define CONSOLE_ARG "console=console=ttyUL0,115200\0"
#elif XILINX_UART16550_BASEADDR
- #define CONFIG_SYS_NS16550 1
- #define CONFIG_SYS_NS16550_SERIAL
- #define CONFIG_SYS_NS16550_REG_SIZE -4
- #define CONFIG_CONS_INDEX 1
- #define CONFIG_SYS_NS16550_COM1 (XILINX_UART16550_BASEADDR + 0x1000 + 0x3)
- #define CONFIG_SYS_NS16550_CLK XILINX_UART16550_CLOCK_HZ
- #define CONFIG_BAUDRATE 115200
-
- /* The following table includes the supported baudrates */
- #define CONFIG_SYS_BAUDRATE_TABLE \
- {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
- #define CONSOLE_ARG "console=console=ttyS0,115200\0"
+# define CONFIG_SYS_NS16550 1
+# define CONFIG_SYS_NS16550_SERIAL
+# define CONFIG_SYS_NS16550_REG_SIZE -4
+# define CONFIG_CONS_INDEX 1
+# define CONFIG_SYS_NS16550_COM1 \
+ (XILINX_UART16550_BASEADDR + 0x1000 + 0x3)
+# define CONFIG_SYS_NS16550_CLK XILINX_UART16550_CLOCK_HZ
+# define CONFIG_BAUDRATE 115200
+
+/* The following table includes the supported baudrates */
+# define CONFIG_SYS_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
+# define CONSOLE_ARG "console=console=ttyS0,115200\0"
#else
- #error Undefined uart
+# error Undefined uart
#endif
/* setting reset address */
@@ -59,41 +61,41 @@
/* ethernet */
#ifdef XILINX_EMACLITE_BASEADDR
- #define CONFIG_XILINX_EMACLITE 1
- #define CONFIG_SYS_ENET
+# define CONFIG_XILINX_EMACLITE 1
+# define CONFIG_SYS_ENET
#elif XILINX_LLTEMAC_BASEADDR
- #define CONFIG_XILINX_LL_TEMAC 1
- #define CONFIG_SYS_ENET
+# define CONFIG_XILINX_LL_TEMAC 1
+# define CONFIG_SYS_ENET
#endif
#undef ET_DEBUG
/* gpio */
#ifdef XILINX_GPIO_BASEADDR
- #define CONFIG_SYS_GPIO_0 1
- #define CONFIG_SYS_GPIO_0_ADDR XILINX_GPIO_BASEADDR
+# define CONFIG_SYS_GPIO_0 1
+# define CONFIG_SYS_GPIO_0_ADDR XILINX_GPIO_BASEADDR
#endif
/* interrupt controller */
#ifdef XILINX_INTC_BASEADDR
- #define CONFIG_SYS_INTC_0 1
- #define CONFIG_SYS_INTC_0_ADDR XILINX_INTC_BASEADDR
- #define CONFIG_SYS_INTC_0_NUM XILINX_INTC_NUM_INTR_INPUTS
+# define CONFIG_SYS_INTC_0 1
+# define CONFIG_SYS_INTC_0_ADDR XILINX_INTC_BASEADDR
+# define CONFIG_SYS_INTC_0_NUM XILINX_INTC_NUM_INTR_INPUTS
#endif
/* timer */
#ifdef XILINX_TIMER_BASEADDR
- #if (XILINX_TIMER_IRQ != -1)
- #define CONFIG_SYS_TIMER_0 1
- #define CONFIG_SYS_TIMER_0_ADDR XILINX_TIMER_BASEADDR
- #define CONFIG_SYS_TIMER_0_IRQ XILINX_TIMER_IRQ
- #define FREQUENCE XILINX_CLOCK_FREQ
- #define CONFIG_SYS_TIMER_0_PRELOAD ( FREQUENCE/1000 )
- #endif
+# if (XILINX_TIMER_IRQ != -1)
+# define CONFIG_SYS_TIMER_0 1
+# define CONFIG_SYS_TIMER_0_ADDR XILINX_TIMER_BASEADDR
+# define CONFIG_SYS_TIMER_0_IRQ XILINX_TIMER_IRQ
+# define FREQUENCE XILINX_CLOCK_FREQ
+# define CONFIG_SYS_TIMER_0_PRELOAD ( FREQUENCE/1000 )
+# endif
#elif XILINX_CLOCK_FREQ
- #define CONFIG_XILINX_CLOCK_FREQ XILINX_CLOCK_FREQ
+# define CONFIG_XILINX_CLOCK_FREQ XILINX_CLOCK_FREQ
#else
- #error BAD CLOCK FREQ
+# error BAD CLOCK FREQ
#endif
/* FSL */
/* #define CONFIG_SYS_FSL_2 */
@@ -135,15 +137,20 @@
/* global pointer */
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size of global data */
/* start of global data */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET \
+ (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE \
+ - CONFIG_SYS_GBL_DATA_SIZE)
/* monitor code */
-#define SIZE 0x40000
+#define SIZE 0x40000
#define CONFIG_SYS_MONITOR_LEN (SIZE - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_SYS_MONITOR_END (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_SYS_MONITOR_BASE \
+ (CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_SYS_MONITOR_END \
+ (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
#define CONFIG_SYS_MALLOC_LEN SIZE
-#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
+#define CONFIG_SYS_MALLOC_BASE \
+ (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
/* stack */
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_MALLOC_BASE
@@ -152,55 +159,62 @@
#define FLASH
#ifdef FLASH
- #define CONFIG_SYS_FLASH_BASE XILINX_FLASH_START
- #define CONFIG_SYS_FLASH_SIZE XILINX_FLASH_SIZE
- #define CONFIG_SYS_FLASH_CFI 1
- #define CONFIG_FLASH_CFI_DRIVER 1
- #define CONFIG_SYS_FLASH_EMPTY_INFO 1 /* ?empty sector */
- #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
- #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
- #define CONFIG_SYS_FLASH_PROTECTION /* hardware flash protection */
-
- #ifdef RAMENV
- #define CONFIG_ENV_IS_NOWHERE 1
- #define CONFIG_ENV_SIZE 0x1000
- #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
-
- #else /* !RAMENV */
- #define CONFIG_ENV_IS_IN_FLASH 1
- #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */
- #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE))
- #define CONFIG_ENV_SIZE 0x20000
- #endif /* !RAMBOOT */
+# define CONFIG_SYS_FLASH_BASE XILINX_FLASH_START
+# define CONFIG_SYS_FLASH_SIZE XILINX_FLASH_SIZE
+# define CONFIG_SYS_FLASH_CFI 1
+# define CONFIG_FLASH_CFI_DRIVER 1
+/* ?empty sector */
+# define CONFIG_SYS_FLASH_EMPTY_INFO 1
+/* max number of memory banks */
+# define CONFIG_SYS_MAX_FLASH_BANKS 1
+/* max number of sectors on one chip */
+# define CONFIG_SYS_MAX_FLASH_SECT 512
+/* hardware flash protection */
+# define CONFIG_SYS_FLASH_PROTECTION
+
+# ifdef RAMENV
+# define CONFIG_ENV_IS_NOWHERE 1
+# define CONFIG_ENV_SIZE 0x1000
+# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
+
+# else /* !RAMENV */
+# define CONFIG_ENV_IS_IN_FLASH 1
+/* 128K(one sector) for env */
+# define CONFIG_ENV_SECT_SIZE 0x20000
+# define CONFIG_ENV_ADDR \
+ (CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE))
+# define CONFIG_ENV_SIZE 0x20000
+# endif /* !RAMBOOT */
#else /* !FLASH */
- /* ENV in RAM */
- #define CONFIG_SYS_NO_FLASH 1
- #define CONFIG_ENV_IS_NOWHERE 1
- #define CONFIG_ENV_SIZE 0x1000
- #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
- #define CONFIG_SYS_FLASH_PROTECTION /* hardware flash protection */
+/* ENV in RAM */
+# define CONFIG_SYS_NO_FLASH 1
+# define CONFIG_ENV_IS_NOWHERE 1
+# define CONFIG_ENV_SIZE 0x1000
+# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
+/* hardware flash protection */
+# define CONFIG_SYS_FLASH_PROTECTION
#endif /* !FLASH */
/* system ace */
#ifdef XILINX_SYSACE_BASEADDR
- #define CONFIG_SYSTEMACE
- /* #define DEBUG_SYSTEMACE */
- #define SYSTEMACE_CONFIG_FPGA
- #define CONFIG_SYS_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR
- #define CONFIG_SYS_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH
- #define CONFIG_DOS_PARTITION
+# define CONFIG_SYSTEMACE
+/* #define DEBUG_SYSTEMACE */
+# define SYSTEMACE_CONFIG_FPGA
+# define CONFIG_SYS_SYSTEMACE_BASE XILINX_SYSACE_BASEADDR
+# define CONFIG_SYS_SYSTEMACE_WIDTH XILINX_SYSACE_MEM_WIDTH
+# define CONFIG_DOS_PARTITION
#endif
#if defined(XILINX_USE_ICACHE)
- #define CONFIG_ICACHE
+# define CONFIG_ICACHE
#else
- #undef CONFIG_ICACHE
+# undef CONFIG_ICACHE
#endif
#if defined(XILINX_USE_DCACHE)
- #define CONFIG_DCACHE
+# define CONFIG_DCACHE
#else
- #undef CONFIG_DCACHE
+# undef CONFIG_DCACHE
#endif
/*
@@ -222,36 +236,39 @@
#define CONFIG_CMD_ECHO
#if defined(CONFIG_DCACHE) || defined(CONFIG_ICACHE)
- #define CONFIG_CMD_CACHE
+# define CONFIG_CMD_CACHE
#else
- #undef CONFIG_CMD_CACHE
+# undef CONFIG_CMD_CACHE
#endif
#ifndef CONFIG_SYS_ENET
- #undef CONFIG_CMD_NET
+# undef CONFIG_CMD_NET
+# undef CONFIG_NET_MULTI
#else
- #define CONFIG_CMD_PING
+# define CONFIG_CMD_PING
+# define CONFIG_CMD_DHCP
+# define CONFIG_NET_MULTI
#endif
#if defined(CONFIG_SYSTEMACE)
- #define CONFIG_CMD_EXT2
- #define CONFIG_CMD_FAT
+# define CONFIG_CMD_EXT2
+# define CONFIG_CMD_FAT
#endif
#if defined(FLASH)
- #define CONFIG_CMD_ECHO
- #define CONFIG_CMD_FLASH
- #define CONFIG_CMD_IMLS
- #define CONFIG_CMD_JFFS2
-
- #if !defined(RAMENV)
- #define CONFIG_CMD_SAVEENV
- #define CONFIG_CMD_SAVES
- #endif
+# define CONFIG_CMD_ECHO
+# define CONFIG_CMD_FLASH
+# define CONFIG_CMD_IMLS
+# define CONFIG_CMD_JFFS2
+
+# if !defined(RAMENV)
+# define CONFIG_CMD_SAVEENV
+# define CONFIG_CMD_SAVES
+# endif
#else
- #undef CONFIG_CMD_IMLS
- #undef CONFIG_CMD_FLASH
- #undef CONFIG_CMD_JFFS2
+# undef CONFIG_CMD_IMLS
+# undef CONFIG_CMD_FLASH
+# undef CONFIG_CMD_JFFS2
#endif
#if defined(CONFIG_CMD_JFFS2)
@@ -259,21 +276,26 @@
#define CONFIG_CMD_MTDPARTS /* mtdparts command line support */
#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
#define CONFIG_FLASH_CFI_MTD
-#define MTDIDS_DEFAULT "nor0=ml401-0"
+#define MTDIDS_DEFAULT "nor0=flash-0"
/* default mtd partition table */
-#define MTDPARTS_DEFAULT "mtdparts=ml401-0:256k(u-boot),"\
+#define MTDPARTS_DEFAULT "mtdparts=flash-0:256k(u-boot),"\
"256k(env),3m(kernel),1m(romfs),"\
"1m(cramfs),-(jffs2)"
#endif
/* Miscellaneous configurable options */
#define CONFIG_SYS_PROMPT "U-Boot-mONStR> "
-#define CONFIG_SYS_CBSIZE 512 /* size of console buffer */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* print buffer size */
-#define CONFIG_SYS_MAXARGS 15 /* max number of command args */
+/* size of console buffer */
+#define CONFIG_SYS_CBSIZE 512
+ /* print buffer size */
+#define CONFIG_SYS_PBSIZE \
+ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+/* max number of command args */
+#define CONFIG_SYS_MAXARGS 15
#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_LOAD_ADDR XILINX_RAM_START /* default load address */
+/* default load address */
+#define CONFIG_SYS_LOAD_ADDR XILINX_RAM_START
#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */
#define CONFIG_BOOTARGS "root=romfs"
@@ -290,9 +312,9 @@
#define CONFIG_PREBOOT "echo U-BOOT for ${hostname};setenv preboot;echo"
-#define CONFIG_EXTRA_ENV_SETTINGS "unlock=yes\0" /* hardware flash protection */\
- "nor0=ml401-0\0"\
- "mtdparts=mtdparts=ml401-0:"\
+#define CONFIG_EXTRA_ENV_SETTINGS "unlock=yes\0" \
+ "nor0=flash-0\0"\
+ "mtdparts=mtdparts=flash-0:"\
"256k(u-boot),256k(env),3m(kernel),"\
"1m(romfs),1m(cramfs),-(jffs2)\0"
@@ -301,7 +323,7 @@
/* Use the HUSH parser */
#define CONFIG_SYS_HUSH_PARSER
#ifdef CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+# define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#endif
#endif /* __CONFIG_H */
diff --git a/include/fat.h b/include/fat.h
index de48afd..afb2116 100644
--- a/include/fat.h
+++ b/include/fat.h
@@ -30,6 +30,10 @@
#include <asm/byteorder.h>
#define CONFIG_SUPPORT_VFAT
+/* Maximum Long File Name length supported here is 128 UTF-16 code units */
+#define VFAT_MAXLEN_BYTES 256 /* Maximum LFN buffer in bytes */
+#define VFAT_MAXSEQ 9 /* Up to 9 of 13 2-byte UTF-16 entries */
+#define LINEAR_PREFETCH_SIZE (SECTOR_SIZE*2) /* Prefetch buffer size */
#define SECTOR_SIZE FS_BLOCK_SIZE
diff --git a/include/fdt_support.h b/include/fdt_support.h
index fd94929..deb5dda 100644
--- a/include/fdt_support.h
+++ b/include/fdt_support.h
@@ -87,6 +87,7 @@ u64 fdt_translate_address(void *blob, int node_offset, const u32 *in_addr);
int fdt_node_offset_by_compat_reg(void *blob, const char *compat,
phys_addr_t compat_off);
int fdt_alloc_phandle(void *blob);
+int fdt_add_edid(void *blob, const char *compat, unsigned char *buf);
#endif /* ifdef CONFIG_OF_LIBFDT */
#endif /* ifndef __FDT_SUPPORT_H */
diff --git a/include/led-display.h b/include/led-display.h
new file mode 100644
index 0000000..41c3744
--- /dev/null
+++ b/include/led-display.h
@@ -0,0 +1,36 @@
+/*
+ * (C) Copyright 2005-2010
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2010
+ * Sergei Poselenov, Emcraft Systems, sposelenov@emcraft.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _led_display_h_
+#define _led_display_h_
+
+/* Display Commands */
+#define DISPLAY_CLEAR 0x1 /* Clear the display */
+#define DISPLAY_HOME 0x2 /* Set cursor at home position */
+#define DISPLAY_MARK 0x4 /* Enable the decimal point led, if implemented */
+
+void display_set(int cmd);
+int display_putc(char c);
+#endif
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 16556c4..3b18d7d 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -208,10 +208,6 @@ struct mtd_info {
int (*lock) (struct mtd_info *mtd, loff_t ofs, uint64_t len);
int (*unlock) (struct mtd_info *mtd, loff_t ofs, uint64_t len);
- /* Power Management functions */
- int (*suspend) (struct mtd_info *mtd);
- void (*resume) (struct mtd_info *mtd);
-
/* Bad block management functions */
int (*block_isbad) (struct mtd_info *mtd, loff_t ofs);
int (*block_markbad) (struct mtd_info *mtd, loff_t ofs);
@@ -259,7 +255,9 @@ extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num);
extern struct mtd_info *get_mtd_device_nm(const char *name);
extern void put_mtd_device(struct mtd_info *mtd);
-
+extern void mtd_get_len_incl_bad(struct mtd_info *mtd, uint64_t offset,
+ const uint64_t length, uint64_t *len_incl_bad,
+ int *truncated);
/* XXX U-BOOT XXX */
#if 0
struct mtd_notifier {
diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h
index 68e174e..5465562 100644
--- a/include/linux/mtd/onenand.h
+++ b/include/linux/mtd/onenand.h
@@ -154,6 +154,7 @@ struct onenand_chip {
/*
* OneNAND Flash Manufacturer ID Codes
*/
+#define ONENAND_MFR_NUMONYX 0x20
#define ONENAND_MFR_SAMSUNG 0xec
/**
diff --git a/include/mpc5xxx.h b/include/mpc5xxx.h
index 2d343c7..859d696 100644
--- a/include/mpc5xxx.h
+++ b/include/mpc5xxx.h
@@ -160,11 +160,12 @@
#define MPC5XXX_WU_GPIO_DATA_O (MPC5XXX_WU_GPIO + 0x000c)
#define MPC5XXX_WU_GPIO_DATA_I (MPC5XXX_WU_GPIO + 0x0020)
-/* GPIO pins */
+/* GPIO pins, for Rev.B chip */
#define GPIO_WKUP_7 0x80000000UL
#define GPIO_PSC6_0 0x10000000UL
#define GPIO_PSC3_9 0x04000000UL
#define GPIO_PSC1_4 0x01000000UL
+#define GPIO_PSC2_4 0x02000000UL
#define MPC5XXX_GPIO_SIMPLE_PSC6_3 0x20000000UL
#define MPC5XXX_GPIO_SIMPLE_PSC6_2 0x10000000UL
diff --git a/include/nand.h b/include/nand.h
index 8bdf419..a452411 100644
--- a/include/nand.h
+++ b/include/nand.h
@@ -98,13 +98,16 @@ struct nand_read_options {
typedef struct nand_read_options nand_read_options_t;
struct nand_erase_options {
- ulong length; /* number of bytes to erase */
- ulong offset; /* first address in NAND to erase */
+ loff_t length; /* number of bytes to erase */
+ loff_t offset; /* first address in NAND to erase */
int quiet; /* don't display progress messages */
int jffs2; /* if true: format for jffs2 usage
* (write appropriate cleanmarker blocks) */
int scrub; /* if true, really clean NAND by erasing
* bad blocks (UNSAFE) */
+
+ /* Don't include skipped bad blocks in size to be erased */
+ int spread;
};
typedef struct nand_erase_options nand_erase_options_t;
diff --git a/include/netdev.h b/include/netdev.h
index 94eedfe..7f66419 100644
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -54,6 +54,8 @@ int designware_initialize(u32 id, ulong base_addr, u32 phy_addr);
int dnet_eth_initialize(int id, void *regs, unsigned int phy_addr);
int e1000_initialize(bd_t *bis);
int eepro100_initialize(bd_t *bis);
+int enc28j60_initialize(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode);
int ep93xx_eth_initialize(u8 dev_num, int base_addr);
int ethoc_initialize(u8 dev_num, int base_addr);
int eth_3com_initialize (bd_t * bis);
@@ -85,9 +87,9 @@ int skge_initialize(bd_t *bis);
int smc911x_initialize(u8 dev_num, int base_addr);
int smc91111_initialize(u8 dev_num, int base_addr);
int tsi108_eth_initialize(bd_t *bis);
-int uec_initialize(int index);
int uec_standard_init(bd_t *bis);
int uli526x_initialize(bd_t *bis);
+int xilinx_emaclite_initialize (bd_t *bis, int base_addr);
int sh_eth_initialize(bd_t *bis);
int dm9000_initialize(bd_t *bis);
diff --git a/lib/gunzip.c b/lib/gunzip.c
index d2b7ad4..482a476 100644
--- a/lib/gunzip.c
+++ b/lib/gunzip.c
@@ -96,11 +96,6 @@ int zunzip(void *dst, int dstlen, unsigned char *src, unsigned long *lenp,
s.zalloc = zalloc;
s.zfree = zfree;
-#if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG)
- s.outcb = (cb_func)WATCHDOG_RESET;
-#else
- s.outcb = Z_NULL;
-#endif /* CONFIG_HW_WATCHDOG */
r = inflateInit2(&s, -MAX_WBITS);
if (r != Z_OK) {
diff --git a/lib/zlib.c b/lib/zlib.c
index 26e5af1..e19484a 100644
--- a/lib/zlib.c
+++ b/lib/zlib.c
@@ -29,6 +29,7 @@
#include <common.h>
#include <compiler.h>
#include <asm/unaligned.h>
+#include <watchdog.h>
#include "u-boot/zlib.h"
#undef OFF /* avoid conflicts */
@@ -1075,8 +1076,7 @@ z_streamp strm;
state->hold = 0;
state->bits = 0;
state->lencode = state->distcode = state->next = state->codes;
- if (strm->outcb != Z_NULL)
- (*strm->outcb)(Z_NULL, 0);
+ WATCHDOG_RESET();
Tracev((stderr, "inflate: reset\n"));
return Z_OK;
}
@@ -1599,6 +1599,7 @@ int flush;
strm->adler = state->check = adler32(0L, Z_NULL, 0);
state->mode = TYPE;
case TYPE:
+ WATCHDOG_RESET();
if (flush == Z_BLOCK) goto inf_leave;
case TYPEDO:
if (state->last) {
@@ -1776,8 +1777,7 @@ int flush;
Tracev((stderr, "inflate: codes ok\n"));
state->mode = LEN;
case LEN:
- if (strm->outcb != Z_NULL) /* for watchdog (U-Boot) */
- (*strm->outcb)(Z_NULL, 0);
+ WATCHDOG_RESET();
if (have >= 6 && left >= 258) {
RESTORE();
inflate_fast(strm, out);
@@ -1990,8 +1990,7 @@ z_streamp strm;
return Z_STREAM_ERROR;
state = (struct inflate_state FAR *)strm->state;
if (state->window != Z_NULL) {
- if (strm->outcb != Z_NULL)
- (*strm->outcb)(Z_NULL, 0);
+ WATCHDOG_RESET();
ZFREE(strm, state->window);
}
ZFREE(strm, strm->state);
diff --git a/net/Makefile b/net/Makefile
index 4f819dd..216d1ec 100644
--- a/net/Makefile
+++ b/net/Makefile
@@ -32,7 +32,7 @@ COBJS-$(CONFIG_CMD_DNS) += dns.o
COBJS-$(CONFIG_CMD_NET) += eth.o
COBJS-$(CONFIG_CMD_NET) += net.o
COBJS-$(CONFIG_CMD_NFS) += nfs.o
-COBJS-$(CONFIG_CMD_NET) += rarp.o
+COBJS-$(CONFIG_CMD_RARP) += rarp.o
COBJS-$(CONFIG_CMD_SNTP) += sntp.o
COBJS-$(CONFIG_CMD_NET) += tftp.o
diff --git a/net/eth.c b/net/eth.c
index 993306f..5c70d4f 100644
--- a/net/eth.c
+++ b/net/eth.c
@@ -263,7 +263,6 @@ int eth_initialize(bd_t *bis)
dev = dev->next;
} while(dev != eth_devices);
-#ifdef CONFIG_NET_MULTI
/* update current ethernet name */
if (eth_current) {
char *act = getenv("ethact");
@@ -271,7 +270,6 @@ int eth_initialize(bd_t *bis)
setenv("ethact", eth_current->name);
} else
setenv("ethact", NULL);
-#endif
putc ('\n');
}
@@ -441,7 +439,7 @@ int eth_receive(volatile void *packet, int length)
void eth_try_another(int first_restart)
{
static struct eth_device *first_failed = NULL;
- char *ethrotate;
+ char *ethrotate, *act;
/*
* Do not rotate between network interfaces when
@@ -460,21 +458,16 @@ void eth_try_another(int first_restart)
eth_current = eth_current->next;
-#ifdef CONFIG_NET_MULTI
/* update current ethernet name */
- {
- char *act = getenv("ethact");
- if (act == NULL || strcmp(act, eth_current->name) != 0)
- setenv("ethact", eth_current->name);
- }
-#endif
+ act = getenv("ethact");
+ if (act == NULL || strcmp(act, eth_current->name) != 0)
+ setenv("ethact", eth_current->name);
if (first_failed == eth_current) {
NetRestartWrap = 1;
}
}
-#ifdef CONFIG_NET_MULTI
void eth_set_current(void)
{
static char *act = NULL;
@@ -501,7 +494,6 @@ void eth_set_current(void)
setenv("ethact", eth_current->name);
}
-#endif
char *eth_get_name (void)
{
diff --git a/net/net.c b/net/net.c
index 33fcd90..d5a5429 100644
--- a/net/net.c
+++ b/net/net.c
@@ -80,7 +80,9 @@
#include <net.h>
#include "bootp.h"
#include "tftp.h"
+#ifdef CONFIG_CMD_RARP
#include "rarp.h"
+#endif
#include "nfs.h"
#ifdef CONFIG_STATUS_LED
#include <status_led.h>
@@ -401,11 +403,13 @@ restart:
BootpRequest ();
break;
+#if defined(CONFIG_CMD_RARP)
case RARP:
RarpTry = 0;
NetOurIP = 0;
RarpRequest ();
break;
+#endif
#if defined(CONFIG_CMD_PING)
case PING:
PingStart();
@@ -1492,6 +1496,7 @@ NetReceive(volatile uchar * inpkt, int len)
}
break;
+#ifdef CONFIG_CMD_RARP
case PROT_RARP:
debug("Got RARP\n");
arp = (ARP_t *)ip;
@@ -1515,7 +1520,7 @@ NetReceive(volatile uchar * inpkt, int len)
(*packetHandler)(0,0,0,0);
}
break;
-
+#endif
case PROT_IP:
debug("Got IP\n");
/* Before we start poking the header, make sure it is there */
@@ -1729,10 +1734,12 @@ static int net_check_prereq (proto_t protocol)
}
/* Fall through */
- case DHCP:
+#ifdef CONFIG_CMD_RARP
case RARP:
+#endif
case BOOTP:
case CDP:
+ case DHCP:
if (memcmp (NetOurEther, "\0\0\0\0\0\0", 6) == 0) {
#ifdef CONFIG_NET_MULTI
extern int eth_get_dev_index (void);
diff --git a/tools/imls/Makefile b/tools/imls/Makefile
index 8407277..0caa397 100644
--- a/tools/imls/Makefile
+++ b/tools/imls/Makefile
@@ -67,7 +67,7 @@ $(obj)imls: $(obj)imls.o $(obj)crc32.o $(obj)image.o $(obj)md5.o \
$(CC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $^
$(STRIP) $@
-# Some files complain if compiled with -pedantic, use FIT_CFLAGS
+# Some files complain if compiled with -pedantic, use HOSTCFLAGS_NOPED
$(obj)image.o: $(SRCTREE)/common/image.c
$(CC) -g $(HOSTCFLAGS_NOPED) -c -o $@ $<