summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--board/freescale/corenet_ds/Makefile2
-rw-r--r--board/freescale/corenet_ds/eth_hydra.c553
2 files changed, 555 insertions, 0 deletions
diff --git a/board/freescale/corenet_ds/Makefile b/board/freescale/corenet_ds/Makefile
index 8b8d01a..c377c39 100644
--- a/board/freescale/corenet_ds/Makefile
+++ b/board/freescale/corenet_ds/Makefile
@@ -28,7 +28,9 @@ LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-y += ddr.o
+COBJS-$(CONFIG_P3041DS) += eth_hydra.o
COBJS-$(CONFIG_P4080DS) += eth_p4080.o
+COBJS-$(CONFIG_P5020DS) += eth_hydra.o
COBJS-$(CONFIG_P3041DS) += p3041ds_ddr.o
COBJS-$(CONFIG_P4080DS) += p4080ds_ddr.o
COBJS-$(CONFIG_P5020DS) += p5020ds_ddr.o
diff --git a/board/freescale/corenet_ds/eth_hydra.c b/board/freescale/corenet_ds/eth_hydra.c
new file mode 100644
index 0000000..91b3408
--- /dev/null
+++ b/board/freescale/corenet_ds/eth_hydra.c
@@ -0,0 +1,553 @@
+/*
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ * Author: Timur Tabi <timur@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This file handles the board muxing between the Fman Ethernet MACs and
+ * the RGMII/SGMII/XGMII PHYs on a Freescale P3041/P5020 "Hydra" reference
+ * board. The RGMII PHYs are the two on-board 1Gb ports. The SGMII PHYs are
+ * provided by the standard Freescale four-port SGMII riser card. The 10Gb
+ * XGMII PHY is provided via the XAUI riser card. Since there is only one
+ * Fman device on a P3041 and P5020, we only support one SGMII card and one
+ * RGMII card.
+ *
+ * Muxing is handled via the PIXIS BRDCFG1 register. The EMI1 bits control
+ * muxing among the RGMII PHYs and the SGMII PHYs. The value for RGMII is
+ * always the same (0). The value for SGMII depends on which slot the riser is
+ * inserted in. The EMI2 bits control muxing for the the XGMII. Like SGMII,
+ * the value is based on which slot the XAUI is inserted in.
+ *
+ * The SERDES configuration is used to determine where the SGMII and XAUI cards
+ * exist, and also which Fman MACs are routed to which PHYs. So for a given
+ * Fman MAC, there is one and only PHY it connects to. MACs cannot be routed
+ * to PHYs dynamically.
+ *
+ *
+ * This file also updates the device tree in three ways:
+ *
+ * 1) The status of each virtual MDIO node that is referenced by an Ethernet
+ * node is set to "okay".
+ *
+ * 2) The phy-handle property of each active Ethernet MAC node is set to the
+ * appropriate PHY node.
+ *
+ * 3) The "mux value" for each virtual MDIO node is set to the correct value,
+ * if necessary. Some virtual MDIO nodes do not have configurable mux
+ * values, so those values are hard-coded in the DTS. On the HYDRA board,
+ * the virtual MDIO node for the SGMII card needs to be updated.
+ *
+ * For all this to work, the device tree needs to have the following:
+ *
+ * 1) An alias for each PHY node that an Ethernet node could be routed to.
+ *
+ * 2) An alias for each real and virtual MDIO node that is disabled by default
+ * and might need to be enabled, and also might need to have its mux-value
+ * updated.
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <asm/fsl_serdes.h>
+#include <fm_eth.h>
+#include <fsl_mdio.h>
+#include <malloc.h>
+#include <asm/fsl_dtsec.h>
+
+#include "../common/ngpixis.h"
+#include "../common/fman.h"
+
+#ifdef CONFIG_FMAN_ENET
+
+#define BRDCFG1_EMI1_SEL_MASK 0x70
+#define BRDCFG1_EMI1_SEL_SLOT1 0x10
+#define BRDCFG1_EMI1_SEL_SLOT2 0x20
+#define BRDCFG1_EMI1_SEL_SLOT5 0x30
+#define BRDCFG1_EMI1_SEL_SLOT6 0x40
+#define BRDCFG1_EMI1_SEL_SLOT7 0x50
+#define BRDCFG1_EMI1_SEL_RGMII 0x00
+#define BRDCFG1_EMI1_EN 0x08
+#define BRDCFG1_EMI2_SEL_MASK 0x06
+#define BRDCFG1_EMI2_SEL_SLOT1 0x00
+#define BRDCFG1_EMI2_SEL_SLOT2 0x02
+
+#define BRDCFG2_REG_GPIO_SEL 0x20
+
+/*
+ * BRDCFG1 mask and value for each MAC
+ *
+ * This array contains the BRDCFG1 values (in mask/val format) that route the
+ * MDIO bus to a particular RGMII or SGMII PHY.
+ */
+struct {
+ u8 mask;
+ u8 val;
+} mdio_mux[NUM_FM_PORTS];
+
+/*
+ * Mapping of all 18 SERDES lanes to board slots. A value of '0' here means
+ * that the mapping must be determined dynamically, or that the lane maps to
+ * something other than a board slot
+ */
+static u8 lane_to_slot[] = {
+ 7, 7, 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 2, 2, 1, 1, 0, 0
+};
+
+/*
+ * Set the board muxing for a given MAC
+ *
+ * The MDIO layer calls this function every time it wants to talk to a PHY.
+ */
+void hydra_mux_mdio(u8 mask, u8 val)
+{
+ clrsetbits_8(&pixis->brdcfg1, mask, val);
+}
+
+struct hydra_mdio {
+ u8 mask;
+ u8 val;
+ struct mii_dev *realbus;
+};
+
+static int hydra_mdio_read(struct mii_dev *bus, int addr, int devad,
+ int regnum)
+{
+ struct hydra_mdio *priv = bus->priv;
+
+ hydra_mux_mdio(priv->mask, priv->val);
+
+ return priv->realbus->read(priv->realbus, addr, devad, regnum);
+}
+
+static int hydra_mdio_write(struct mii_dev *bus, int addr, int devad,
+ int regnum, u16 value)
+{
+ struct hydra_mdio *priv = bus->priv;
+
+ hydra_mux_mdio(priv->mask, priv->val);
+
+ return priv->realbus->write(priv->realbus, addr, devad, regnum, value);
+}
+
+static int hydra_mdio_reset(struct mii_dev *bus)
+{
+ struct hydra_mdio *priv = bus->priv;
+
+ return priv->realbus->reset(priv->realbus);
+}
+
+static void hydra_mdio_set_mux(char *name, u8 mask, u8 val)
+{
+ struct mii_dev *bus = miiphy_get_dev_by_name(name);
+ struct hydra_mdio *priv = bus->priv;
+
+ priv->mask = mask;
+ priv->val = val;
+}
+
+static int hydra_mdio_init(char *realbusname, char *fakebusname)
+{
+ struct hydra_mdio *hmdio;
+ struct mii_dev *bus = mdio_alloc();
+
+ if (!bus) {
+ printf("Failed to allocate Hydra MDIO bus\n");
+ return -1;
+ }
+
+ hmdio = malloc(sizeof(*hmdio));
+ if (!hmdio) {
+ printf("Failed to allocate Hydra private data\n");
+ free(bus);
+ return -1;
+ }
+
+ bus->read = hydra_mdio_read;
+ bus->write = hydra_mdio_write;
+ bus->reset = hydra_mdio_reset;
+ sprintf(bus->name, fakebusname);
+
+ hmdio->realbus = miiphy_get_dev_by_name(realbusname);
+
+ if (!hmdio->realbus) {
+ printf("No bus with name %s\n", realbusname);
+ free(bus);
+ free(hmdio);
+ return -1;
+ }
+
+ bus->priv = hmdio;
+
+ return mdio_register(bus);
+}
+
+/*
+ * Given an alias or a path for a node, set the status of that node.
+ *
+ * If 'alias' is not a valid alias, then it is treated as a full path to the
+ * node. No error checking is performed.
+ *
+ * This function is normally called to set the status for a virtual MDIO node.
+ */
+static void fdt_set_node_status(void *fdt, const char *alias,
+ const char *status)
+{
+ const char *path = fdt_get_alias(fdt, alias);
+
+ if (!path)
+ path = alias;
+
+ do_fixup_by_path(fdt, path, "status", status, strlen(status) + 1, 1);
+}
+
+/*
+ * Given an alias or a path for a node, set the mux value of that node.
+ *
+ * If 'alias' is not a valid alias, then it is treated as a full path to the
+ * node. No error checking is performed.
+ *
+ * This function is normally called to set the fsl,hydra-mdio-muxval property
+ * of a virtual MDIO node.
+ */
+static void fdt_set_mdio_mux(void *fdt, const char *alias, u32 mux)
+{
+ const char *path = fdt_get_alias(fdt, alias);
+
+ if (!path)
+ path = alias;
+
+ do_fixup_by_path(fdt, path, "fsl,hydra-mdio-muxval",
+ &mux, sizeof(mux), 1);
+}
+
+/*
+ * Given the following ...
+ *
+ * 1) A pointer to an Fman Ethernet node (as identified by the 'compat'
+ * compatible string and 'addr' physical address)
+ *
+ * 2) An Fman port
+ *
+ * ... update the phy-handle property of the Ethernet node to point to the
+ * right PHY. This assumes that we already know the PHY for each port. That
+ * information is stored in mdio_mux[].
+ *
+ * The offset of the Fman Ethernet node is also passed in for convenience, but
+ * it is not used, and we recalculate the offset anyway.
+ *
+ * Note that what we call "Fman ports" (enum fm_port) is really an Fman MAC.
+ * Inside the Fman, "ports" are things that connect to MACs. We only call them
+ * ports in U-Boot because on previous Ethernet devices (e.g. Gianfar), MACs
+ * and ports are the same thing.
+ *
+ * Note that this code would be cleaner if had a function called
+ * fm_info_get_phy_address(), which returns a value from the fm1_dtsec_info[]
+ * array. That's because all we're doing is figuring out the PHY address for
+ * a given Fman MAC and writing it to the device tree. Well, we already did
+ * the hard work to figure that out in board_eth_init(), so it's silly to
+ * repeat that here.
+ */
+void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
+ enum fm_port port, int offset)
+{
+ unsigned int mux = mdio_mux[port].val & mdio_mux[port].mask;
+ char phy[16];
+
+ if (port == FM1_10GEC1) {
+ /* XAUI */
+ int lane = serdes_get_first_lane(XAUI_FM1);
+ if (lane >= 0) {
+ /* The XAUI PHY is identified by the slot */
+ sprintf(phy, "phy_xgmii_%u", lane_to_slot[lane]);
+ fdt_set_phy_handle(fdt, compat, addr, phy);
+ }
+ return;
+ }
+
+ if (mux == BRDCFG1_EMI1_SEL_RGMII) {
+ /* RGMII */
+ /* The RGMII PHY is identified by the MAC connected to it */
+ sprintf(phy, "phy_rgmii_%u", port == FM1_DTSEC4 ? 0 : 1);
+ fdt_set_phy_handle(fdt, compat, addr, phy);
+ }
+
+ /* If it's not RGMII or XGMII, it must be SGMII */
+ if (mux) {
+ /* The SGMII PHY is identified by the MAC connected to it */
+ sprintf(phy, "phy_sgmii_%x",
+ CONFIG_SYS_FM1_DTSEC1_PHY_ADDR + (port - FM1_DTSEC1));
+ fdt_set_phy_handle(fdt, compat, addr, phy);
+ }
+}
+
+#define PIXIS_SW2_LANE_23_SEL 0x80
+#define PIXIS_SW2_LANE_45_SEL 0x40
+#define PIXIS_SW2_LANE_67_SEL_MASK 0x30
+#define PIXIS_SW2_LANE_67_SEL_5 0x00
+#define PIXIS_SW2_LANE_67_SEL_6 0x20
+#define PIXIS_SW2_LANE_67_SEL_7 0x10
+#define PIXIS_SW2_LANE_8_SEL 0x08
+#define PIXIS_SW2_LANE_1617_SEL 0x04
+
+/*
+ * Initialize the lane_to_slot[] array.
+ *
+ * On the P4080DS "Expedition" board, the mapping of SERDES lanes to board
+ * slots is hard-coded. On the Hydra board, however, the mapping is controlled
+ * by board switch SW2, so the lane_to_slot[] array needs to be dynamically
+ * initialized.
+ */
+static void initialize_lane_to_slot(void)
+{
+ u8 sw2 = in_8(&PIXIS_SW(2));
+
+ lane_to_slot[2] = (sw2 & PIXIS_SW2_LANE_23_SEL) ? 7 : 4;
+ lane_to_slot[3] = lane_to_slot[2];
+
+ lane_to_slot[4] = (sw2 & PIXIS_SW2_LANE_45_SEL) ? 7 : 6;
+ lane_to_slot[5] = lane_to_slot[4];
+
+ switch (sw2 & PIXIS_SW2_LANE_67_SEL_MASK) {
+ case PIXIS_SW2_LANE_67_SEL_5:
+ lane_to_slot[6] = 5;
+ break;
+ case PIXIS_SW2_LANE_67_SEL_6:
+ lane_to_slot[6] = 6;
+ break;
+ case PIXIS_SW2_LANE_67_SEL_7:
+ lane_to_slot[6] = 7;
+ break;
+ }
+ lane_to_slot[7] = lane_to_slot[6];
+
+ lane_to_slot[8] = (sw2 & PIXIS_SW2_LANE_8_SEL) ? 3 : 0;
+
+ lane_to_slot[16] = (sw2 & PIXIS_SW2_LANE_1617_SEL) ? 1 : 0;
+ lane_to_slot[17] = lane_to_slot[16];
+}
+
+#endif /* #ifdef CONFIG_FMAN_ENET */
+
+/*
+ * Configure the status for the virtual MDIO nodes
+ *
+ * Rather than create the virtual MDIO nodes from scratch for each active
+ * virtual MDIO, we expect the DTS to have the nodes defined already, and we
+ * only enable the ones that are actually active.
+ *
+ * We assume that the DTS already hard-codes the status for all the
+ * virtual MDIO nodes to "disabled", so all we need to do is enable the
+ * active ones.
+ *
+ * For SGMII, we also need to set the mux value in the node.
+ */
+void fdt_fixup_board_enet(void *fdt)
+{
+#ifdef CONFIG_FMAN_ENET
+ unsigned int i;
+ int lane;
+
+ for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
+ int idx = i - FM1_DTSEC1;
+
+ switch (fm_info_get_enet_if(i)) {
+ case PHY_INTERFACE_MODE_SGMII:
+ lane = serdes_get_first_lane(SGMII_FM1_DTSEC1 + idx);
+ if (lane >= 0) {
+ fdt_set_node_status(fdt, "emi1_sgmii", "okay");
+ /* Also set the MUX value */
+ fdt_set_mdio_mux(fdt, "emi1_sgmii",
+ mdio_mux[i].val);
+ }
+ break;
+ case PHY_INTERFACE_MODE_RGMII:
+ fdt_set_node_status(fdt, "emi1_rgmii", "okay");
+ break;
+ default:
+ break;
+ }
+ }
+
+ lane = serdes_get_first_lane(XAUI_FM1);
+ if (lane >= 0)
+ fdt_set_node_status(fdt, "emi2_xgmii", "okay");
+#endif
+}
+
+int board_eth_init(bd_t *bis)
+{
+#ifdef CONFIG_FMAN_ENET
+ struct dtsec *tsec = (void *)CONFIG_SYS_FSL_FM1_DTSEC1_ADDR;
+ struct fsl_pq_mdio_info dtsec_mdio_info;
+ struct tgec_mdio_info tgec_mdio_info;
+ unsigned int i, slot;
+ int lane;
+
+ printf("Initializing Fman\n");
+
+ initialize_lane_to_slot();
+
+ /*
+ * Set TBIPA on FM1@DTSEC1. This is needed for configurations
+ * where FM1@DTSEC1 isn't used directly, since it provides
+ * MDIO for other ports.
+ */
+ out_be32(&tsec->tbipa, CONFIG_SYS_TBIPA_VALUE);
+
+ /* We want to use the PIXIS to configure MUX routing, not GPIOs. */
+ setbits_8(&pixis->brdcfg2, BRDCFG2_REG_GPIO_SEL);
+
+ memset(mdio_mux, 0, sizeof(mdio_mux));
+
+ dtsec_mdio_info.regs =
+ (struct tsec_mii_mng *)CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR;
+ dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME;
+
+ /* Register the real 1G MDIO bus */
+ fsl_pq_mdio_init(bis, &dtsec_mdio_info);
+
+ tgec_mdio_info.regs =
+ (struct tgec_mdio_controller *)CONFIG_SYS_FM1_TGEC_MDIO_ADDR;
+ tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME;
+
+ /* Register the real 10G MDIO bus */
+ fm_tgec_mdio_init(bis, &tgec_mdio_info);
+
+ /* Register the three virtual MDIO front-ends */
+ hydra_mdio_init(DEFAULT_FM_MDIO_NAME, "HYDRA_RGMII_MDIO");
+ hydra_mdio_init(DEFAULT_FM_MDIO_NAME, "HYDRA_SGMII_MDIO");
+
+ /*
+ * Program the DTSEC PHY addresses assuming that they are all SGMII.
+ * For any DTSEC that's RGMII, we'll override its PHY address later.
+ * We assume that DTSEC5 is only used for RGMII.
+ */
+ fm_info_set_phy_address(FM1_DTSEC1, CONFIG_SYS_FM1_DTSEC1_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC2, CONFIG_SYS_FM1_DTSEC2_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC3, CONFIG_SYS_FM1_DTSEC3_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC4, CONFIG_SYS_FM1_DTSEC4_PHY_ADDR);
+
+ for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
+ int idx = i - FM1_DTSEC1;
+
+ switch (fm_info_get_enet_if(i)) {
+ case PHY_INTERFACE_MODE_SGMII:
+ lane = serdes_get_first_lane(SGMII_FM1_DTSEC1 + idx);
+ if (lane < 0)
+ break;
+ slot = lane_to_slot[lane];
+ mdio_mux[i].mask = BRDCFG1_EMI1_SEL_MASK;
+ switch (slot) {
+ case 1:
+ /* Always DTSEC5 on Bank 3 */
+ mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT1 |
+ BRDCFG1_EMI1_EN;
+ break;
+ case 2:
+ mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT2 |
+ BRDCFG1_EMI1_EN;
+ break;
+ case 5:
+ mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT5 |
+ BRDCFG1_EMI1_EN;
+ break;
+ case 6:
+ mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT6 |
+ BRDCFG1_EMI1_EN;
+ break;
+ case 7:
+ mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT7 |
+ BRDCFG1_EMI1_EN;
+ break;
+ };
+
+ hydra_mdio_set_mux("HYDRA_SGMII_MDIO",
+ mdio_mux[i].mask, mdio_mux[i].val);
+ fm_info_set_mdio(i,
+ miiphy_get_dev_by_name("HYDRA_SGMII_MDIO"));
+ break;
+ case PHY_INTERFACE_MODE_RGMII:
+ /*
+ * If DTSEC4 is RGMII, then it's routed via via EC1 to
+ * the first on-board RGMII port. If DTSEC5 is RGMII,
+ * then it's routed via via EC2 to the second on-board
+ * RGMII port. The other DTSECs cannot be routed to
+ * RGMII.
+ */
+ fm_info_set_phy_address(i, i == FM1_DTSEC4 ? 0 : 1);
+ mdio_mux[i].mask = BRDCFG1_EMI1_SEL_MASK;
+ mdio_mux[i].val = BRDCFG1_EMI1_SEL_RGMII |
+ BRDCFG1_EMI1_EN;
+ hydra_mdio_set_mux("HYDRA_RGMII_MDIO",
+ mdio_mux[i].mask, mdio_mux[i].val);
+ fm_info_set_mdio(i,
+ miiphy_get_dev_by_name("HYDRA_RGMII_MDIO"));
+ break;
+ case PHY_INTERFACE_MODE_NONE:
+ fm_info_set_phy_address(i, 0);
+ break;
+ default:
+ printf("Fman1: DTSEC%u set to unknown interface %i\n",
+ idx + 1, fm_info_get_enet_if(i));
+ fm_info_set_phy_address(i, 0);
+ break;
+ }
+ }
+
+ /*
+ * For 10G, we only support one XAUI card per Fman. If present, then we
+ * force its routing and never touch those bits again, which removes the
+ * need for Linux to do any muxing. This works because of the way
+ * BRDCFG1 is defined, but it's a bit hackish.
+ *
+ * The PHY address for the XAUI card depends on which slot it's in. The
+ * macros we use imply that the PHY address is based on which FM, but
+ * that's not true. On the P4080DS, FM1 could only use XAUI in slot 5,
+ * and FM2 could only use a XAUI in slot 4. On the Hydra board, we
+ * check the actual slot and just use the macros as-is, even though
+ * the P3041 and P5020 only have one Fman.
+ */
+ lane = serdes_get_first_lane(XAUI_FM1);
+ if (lane >= 0) {
+ slot = lane_to_slot[lane];
+ if (slot == 1) {
+ /* XAUI card is in slot 1 */
+ clrsetbits_8(&pixis->brdcfg1, BRDCFG1_EMI2_SEL_MASK,
+ BRDCFG1_EMI2_SEL_SLOT1);
+ fm_info_set_phy_address(FM1_10GEC1,
+ CONFIG_SYS_FM1_10GEC1_PHY_ADDR);
+ } else {
+ /* XAUI card is in slot 2 */
+ clrsetbits_8(&pixis->brdcfg1, BRDCFG1_EMI2_SEL_MASK,
+ BRDCFG1_EMI2_SEL_SLOT2);
+ fm_info_set_phy_address(FM1_10GEC1,
+ CONFIG_SYS_FM2_10GEC1_PHY_ADDR);
+ }
+ }
+
+ fm_info_set_mdio(FM1_10GEC1,
+ miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME));
+
+ cpu_eth_init(bis);
+#endif
+
+ return pci_eth_init(bis);
+}