summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--README6
-rw-r--r--arch/powerpc/cpu/mpc85xx/Makefile12
-rw-r--r--arch/powerpc/cpu/mpc85xx/b4860_ids.c141
-rw-r--r--arch/powerpc/cpu/mpc85xx/b4860_serdes.c162
-rw-r--r--arch/powerpc/cpu/mpc85xx/cmd_errata.c14
-rw-r--r--arch/powerpc/cpu/mpc85xx/cpu.c42
-rw-r--r--arch/powerpc/cpu/mpc85xx/cpu_init.c62
-rw-r--r--arch/powerpc/cpu/mpc85xx/ddr-gen3.c91
-rw-r--r--arch/powerpc/cpu/mpc85xx/fdt.c34
-rw-r--r--arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c203
-rw-r--r--arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.h26
-rw-r--r--arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c70
-rw-r--r--arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h3
-rw-r--r--arch/powerpc/cpu/mpc85xx/liodn.c60
-rw-r--r--arch/powerpc/cpu/mpc85xx/mp.c155
-rw-r--r--arch/powerpc/cpu/mpc85xx/mp.h5
-rw-r--r--arch/powerpc/cpu/mpc85xx/p5040_ids.c127
-rw-r--r--arch/powerpc/cpu/mpc85xx/p5040_serdes.c117
-rw-r--r--arch/powerpc/cpu/mpc85xx/portals.c13
-rw-r--r--arch/powerpc/cpu/mpc85xx/release.S219
-rw-r--r--arch/powerpc/cpu/mpc85xx/speed.c163
-rw-r--r--arch/powerpc/cpu/mpc85xx/start.S346
-rw-r--r--arch/powerpc/cpu/mpc85xx/t4240_ids.c203
-rw-r--r--arch/powerpc/cpu/mpc85xx/t4240_serdes.c237
-rw-r--r--arch/powerpc/cpu/mpc85xx/tlb.c2
-rw-r--r--arch/powerpc/cpu/mpc86xx/fdt.c2
-rw-r--r--arch/powerpc/cpu/mpc86xx/mp.c9
-rw-r--r--arch/powerpc/cpu/mpc8xxx/cpu.c11
-rw-r--r--arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c84
-rw-r--r--arch/powerpc/cpu/mpc8xxx/ddr/interactive.c12
-rw-r--r--arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c16
-rw-r--r--arch/powerpc/cpu/mpc8xxx/ddr/main.c26
-rw-r--r--arch/powerpc/cpu/mpc8xxx/ddr/options.c45
-rw-r--r--arch/powerpc/cpu/mpc8xxx/ddr/util.c22
-rw-r--r--arch/powerpc/cpu/mpc8xxx/fdt.c50
-rw-r--r--arch/powerpc/cpu/mpc8xxx/srio.c216
-rw-r--r--arch/powerpc/include/asm/config_mpc85xx.h103
-rw-r--r--arch/powerpc/include/asm/fsl_ddr_sdram.h34
-rw-r--r--arch/powerpc/include/asm/fsl_fman.h17
-rw-r--r--arch/powerpc/include/asm/fsl_liodn.h15
-rw-r--r--arch/powerpc/include/asm/fsl_memac.h271
-rw-r--r--arch/powerpc/include/asm/fsl_portals.h5
-rw-r--r--arch/powerpc/include/asm/fsl_serdes.h42
-rw-r--r--arch/powerpc/include/asm/immap_85xx.h367
-rw-r--r--arch/powerpc/include/asm/mp.h2
-rw-r--r--arch/powerpc/include/asm/mpc85xx_gpio.h5
-rw-r--r--arch/powerpc/include/asm/processor.h11
-rw-r--r--arch/powerpc/lib/board.c4
-rw-r--r--board/freescale/common/Makefile1
-rw-r--r--board/freescale/common/qixis.c15
-rw-r--r--board/freescale/common/qixis.h8
-rw-r--r--board/freescale/common/vsc3316_3308.c184
-rw-r--r--board/freescale/common/vsc3316_3308.h34
-rw-r--r--board/freescale/t4qds/Makefile54
-rw-r--r--board/freescale/t4qds/ddr.c186
-rw-r--r--board/freescale/t4qds/eth.c495
-rw-r--r--board/freescale/t4qds/law.c47
-rw-r--r--board/freescale/t4qds/pci.c39
-rw-r--r--board/freescale/t4qds/t4240qds_qixis.h56
-rw-r--r--board/freescale/t4qds/t4qds.c395
-rw-r--r--board/freescale/t4qds/t4qds.h37
-rw-r--r--board/freescale/t4qds/tlb.c136
-rw-r--r--boards.cfg3
-rw-r--r--doc/README.VSC3316-330843
-rw-r--r--doc/README.fsl-ddr5
-rw-r--r--doc/README.mpc85xx-spin-table26
-rw-r--r--doc/README.t4240qds98
-rw-r--r--drivers/net/fm/Makefile6
-rw-r--r--drivers/net/fm/eth.c39
-rw-r--r--drivers/net/fm/init.c18
-rw-r--r--drivers/net/fm/memac.c132
-rw-r--r--drivers/net/fm/memac_phy.c150
-rw-r--r--drivers/net/fm/t4240.c128
-rw-r--r--drivers/pci/fsl_pci_init.c65
-rw-r--r--drivers/spi/fsl_espi.c6
-rw-r--r--include/config_phylib_all_drivers.h1
-rw-r--r--include/configs/P3041DS.h4
-rw-r--r--include/configs/P4080DS.h4
-rw-r--r--include/configs/P5020DS.h4
-rw-r--r--include/configs/T4240QDS.h35
-rw-r--r--include/configs/corenet_ds.h4
-rw-r--r--include/configs/t4qds.h875
-rw-r--r--include/e500.h3
-rw-r--r--include/fm_eth.h53
-rw-r--r--include/fsl_mdio.h6
85 files changed, 6764 insertions, 513 deletions
diff --git a/README b/README
index a664607..69da2b8 100644
--- a/README
+++ b/README
@@ -363,6 +363,12 @@ The following options need to be configured:
ICache only when Code runs from RAM.
- 85xx CPU Options:
+ CONFIG_SYS_PPC64
+
+ Specifies that the core is a 64-bit PowerPC implementation (implements
+ the "64" category of the Power ISA). This is necessary for ePAPR
+ compliance, among other possible reasons.
+
CONFIG_SYS_FSL_TBCLK_DIV
Defines the core time base clock divider ratio compared to the
diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile
index 33e93c8..78c412d 100644
--- a/arch/powerpc/cpu/mpc85xx/Makefile
+++ b/arch/powerpc/cpu/mpc85xx/Makefile
@@ -66,6 +66,9 @@ COBJS-$(CONFIG_PPC_P2041) += ddr-gen3.o
COBJS-$(CONFIG_PPC_P3041) += ddr-gen3.o
COBJS-$(CONFIG_PPC_P4080) += ddr-gen3.o
COBJS-$(CONFIG_PPC_P5020) += ddr-gen3.o
+COBJS-$(CONFIG_PPC_P5040) += ddr-gen3.o
+COBJS-$(CONFIG_PPC_T4240) += ddr-gen3.o
+COBJS-$(CONFIG_PPC_B4860) += ddr-gen3.o
COBJS-$(CONFIG_BSC9131) += ddr-gen3.o
COBJS-$(CONFIG_CPM2) += ether_fcc.o
@@ -80,10 +83,14 @@ COBJS-$(CONFIG_PPC_P2041) += p2041_ids.o
COBJS-$(CONFIG_PPC_P3041) += p3041_ids.o
COBJS-$(CONFIG_PPC_P4080) += p4080_ids.o
COBJS-$(CONFIG_PPC_P5020) += p5020_ids.o
+COBJS-$(CONFIG_PPC_P5040) += p5040_ids.o
+COBJS-$(CONFIG_PPC_T4240) += t4240_ids.o
+COBJS-$(CONFIG_PPC_B4860) += b4860_ids.o
COBJS-$(CONFIG_QE) += qe_io.o
COBJS-$(CONFIG_CPM2) += serial_scc.o
-COBJS-$(CONFIG_FSL_CORENET) += fsl_corenet_serdes.o
+COBJS-$(CONFIG_SYS_FSL_QORIQ_CHASSIS1) += fsl_corenet_serdes.o
+COBJS-$(CONFIG_SYS_FSL_QORIQ_CHASSIS2) += fsl_corenet2_serdes.o
# SoC specific SERDES support
COBJS-$(CONFIG_MPC8536) += mpc8536_serdes.o
@@ -110,6 +117,9 @@ COBJS-$(CONFIG_PPC_P2041) += p2041_serdes.o
COBJS-$(CONFIG_PPC_P3041) += p3041_serdes.o
COBJS-$(CONFIG_PPC_P4080) += p4080_serdes.o
COBJS-$(CONFIG_PPC_P5020) += p5020_serdes.o
+COBJS-$(CONFIG_PPC_P5040) += p5040_serdes.o
+COBJS-$(CONFIG_PPC_T4240) += t4240_serdes.o
+COBJS-$(CONFIG_PPC_B4860) += b4860_serdes.o
COBJS = $(COBJS-y)
COBJS += cpu.o
diff --git a/arch/powerpc/cpu/mpc85xx/b4860_ids.c b/arch/powerpc/cpu/mpc85xx/b4860_ids.c
new file mode 100644
index 0000000..7d33731
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/b4860_ids.c
@@ -0,0 +1,141 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+
+#ifdef CONFIG_SYS_DPAA_QBMAN
+struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = {
+ /* dqrr liodn, frame data liodn, liodn off, sdest */
+ SET_QP_INFO(1, 27, 1, 0),
+ SET_QP_INFO(2, 28, 1, 0),
+ SET_QP_INFO(3, 29, 1, 1),
+ SET_QP_INFO(4, 30, 1, 1),
+ SET_QP_INFO(5, 31, 1, 2),
+ SET_QP_INFO(6, 32, 1, 2),
+ SET_QP_INFO(7, 33, 1, 3),
+ SET_QP_INFO(8, 34, 1, 3),
+ SET_QP_INFO(9, 35, 1, 0),
+ SET_QP_INFO(10, 36, 1, 0),
+ SET_QP_INFO(11, 37, 1, 1),
+ SET_QP_INFO(12, 38, 1, 1),
+ SET_QP_INFO(13, 39, 1, 2),
+ SET_QP_INFO(14, 40, 1, 2),
+ SET_QP_INFO(15, 41, 1, 3),
+ SET_QP_INFO(16, 42, 1, 3),
+ SET_QP_INFO(17, 43, 1, 0),
+ SET_QP_INFO(18, 44, 1, 0),
+ SET_QP_INFO(19, 45, 1, 1),
+ SET_QP_INFO(20, 46, 1, 1),
+ SET_QP_INFO(21, 47, 1, 2),
+ SET_QP_INFO(22, 48, 1, 2),
+ SET_QP_INFO(23, 49, 1, 3),
+ SET_QP_INFO(24, 50, 1, 3),
+ SET_QP_INFO(25, 51, 1, 0),
+};
+#endif
+
+struct srio_liodn_id_table srio_liodn_tbl[] = {
+ SET_SRIO_LIODN_1(1, 307),
+ SET_SRIO_LIODN_1(2, 387),
+};
+int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl);
+
+struct liodn_id_table liodn_tbl[] = {
+#ifdef CONFIG_SYS_DPAA_QBMAN
+ SET_QMAN_LIODN(62),
+ SET_BMAN_LIODN(63),
+#endif
+
+ SET_SDHC_LIODN(1, 552),
+
+ SET_USB_LIODN(1, "fsl-usb2-mph", 553),
+
+ SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 148),
+
+ SET_DMA_LIODN(1, 147),
+ SET_DMA_LIODN(2, 227),
+
+ SET_GUTS_LIODN("fsl,rapidio-delta", 199, rio1liodnr, 0),
+ SET_GUTS_LIODN(NULL, 200, rio2liodnr, 0),
+ SET_GUTS_LIODN(NULL, 201, rio1maintliodnr, 0),
+ SET_GUTS_LIODN(NULL, 202, rio2maintliodnr, 0),
+
+ /* SET_NEXUS_LIODN(557), -- not yet implemented */
+};
+int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl);
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+struct liodn_id_table fman1_liodn_tbl[] = {
+ SET_FMAN_RX_1G_LIODN(1, 0, 88),
+ SET_FMAN_RX_1G_LIODN(1, 1, 89),
+ SET_FMAN_RX_1G_LIODN(1, 2, 90),
+ SET_FMAN_RX_1G_LIODN(1, 3, 91),
+ SET_FMAN_RX_1G_LIODN(1, 4, 92),
+ SET_FMAN_RX_1G_LIODN(1, 5, 93),
+ SET_FMAN_RX_10G_LIODN(1, 0, 94),
+ SET_FMAN_RX_10G_LIODN(1, 1, 95),
+};
+int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl);
+#endif
+
+struct liodn_id_table sec_liodn_tbl[] = {
+ SET_SEC_JR_LIODN_ENTRY(0, 454, 458),
+ SET_SEC_JR_LIODN_ENTRY(1, 455, 459),
+ SET_SEC_JR_LIODN_ENTRY(2, 456, 460),
+ SET_SEC_JR_LIODN_ENTRY(3, 457, 461),
+ SET_SEC_RTIC_LIODN_ENTRY(a, 453),
+ SET_SEC_RTIC_LIODN_ENTRY(b, 549),
+ SET_SEC_RTIC_LIODN_ENTRY(c, 550),
+ SET_SEC_RTIC_LIODN_ENTRY(d, 551),
+ SET_SEC_DECO_LIODN_ENTRY(0, 541, 610),
+ SET_SEC_DECO_LIODN_ENTRY(1, 542, 611),
+ SET_SEC_DECO_LIODN_ENTRY(2, 543, 612),
+ SET_SEC_DECO_LIODN_ENTRY(3, 544, 613),
+ SET_SEC_DECO_LIODN_ENTRY(4, 545, 614),
+ SET_SEC_DECO_LIODN_ENTRY(5, 546, 615),
+ SET_SEC_DECO_LIODN_ENTRY(6, 547, 616),
+ SET_SEC_DECO_LIODN_ENTRY(7, 548, 617),
+};
+int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl);
+
+#ifdef CONFIG_SYS_DPAA_RMAN
+struct liodn_id_table rman_liodn_tbl[] = {
+ /* Set RMan block 0-3 liodn offset */
+ SET_RMAN_LIODN(0, 678),
+ SET_RMAN_LIODN(1, 679),
+ SET_RMAN_LIODN(2, 680),
+ SET_RMAN_LIODN(3, 681),
+};
+int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl);
+#endif
+
+struct liodn_id_table liodn_bases[] = {
+ [FSL_HW_PORTAL_SEC] = SET_LIODN_BASE_2(462, 558),
+#ifdef CONFIG_SYS_DPAA_FMAN
+ [FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(973),
+#endif
+#ifdef CONFIG_SYS_DPAA_RMAN
+ [FSL_HW_PORTAL_RMAN] = SET_LIODN_BASE_1(922),
+#endif
+};
diff --git a/arch/powerpc/cpu/mpc85xx/b4860_serdes.c b/arch/powerpc/cpu/mpc85xx/b4860_serdes.c
new file mode 100644
index 0000000..9990202
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/b4860_serdes.c
@@ -0,0 +1,162 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_serdes.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include "fsl_corenet2_serdes.h"
+
+struct serdes_config {
+ u8 protocol;
+ u8 lanes[SRDS_MAX_LANES];
+};
+
+static struct serdes_config serdes1_cfg_tbl[] = {
+ /* SerDes 1 */
+ {0x0D, {CPRI8, CPRI7, CPRI6, CPRI5,
+ CPRI4, CPRI3, CPRI2, CPRI1}},
+ {0x0E, {CPRI8, CPRI7, CPRI6, CPRI5,
+ CPRI4, CPRI3, CPRI2, CPRI1}},
+ {0x12, {CPRI8, CPRI7, CPRI6, CPRI5,
+ CPRI4, CPRI3, CPRI2, CPRI1}},
+ {0x2a, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6,
+ CPRI6, CPRI5, CPRI4, CPRI3, CPRI2, CPRI1}},
+ {0x30, {AURORA, AURORA,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ CPRI4, CPRI3, CPRI2, CPRI1}},
+ {0x32, {AURORA, AURORA,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ CPRI4, CPRI3, CPRI2, CPRI1}},
+ {0x33, {AURORA, AURORA,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ CPRI4, CPRI3, CPRI2, CPRI1}},
+ {0x34, {AURORA, AURORA,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ CPRI4, CPRI3, CPRI2, CPRI1}},
+ {0x3E, {CPRI8, CPRI7, CPRI6, CPRI5,
+ CPRI4, CPRI3, CPRI2, CPRI1}},
+ {}
+};
+static struct serdes_config serdes2_cfg_tbl[] = {
+ /* SerDes 2 */
+ {0x18, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ AURORA, AURORA, SRIO1, SRIO1}},
+ {0x1D, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ AURORA, AURORA, SRIO1, SRIO1}},
+ {0x2B, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SRIO2, SRIO2,
+ AURORA, AURORA, SRIO1, SRIO1}},
+ {0x30, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SRIO2, SRIO2,
+ AURORA, AURORA,
+ SRIO1, SRIO1}},
+ {0x49, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, AURORA,
+ SRIO1, SRIO1, SRIO1, SRIO1}},
+ {0x4A, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, AURORA,
+ SRIO1, SRIO1, SRIO1, SRIO1}},
+ {0x4C, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, AURORA,
+ SRIO1, SRIO1, SRIO1, SRIO1}},
+ {0x4E, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, AURORA,
+ SRIO1, SRIO1, SRIO1, SRIO1}},
+ {0x84, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SRIO2, SRIO2, AURORA, AURORA,
+ XFI_FM1_MAC9, XFI_FM1_MAC10}},
+ {0x85, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SRIO2, SRIO2, AURORA, AURORA,
+ XFI_FM1_MAC9, XFI_FM1_MAC10}},
+ {0x87, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SRIO2, SRIO2,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ XFI_FM1_MAC9, XFI_FM1_MAC10}},
+ {0x93, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ XAUI_FM1_MAC10, XAUI_FM1_MAC10,
+ XAUI_FM1_MAC10, XAUI_FM1_MAC10}},
+ {0x9E, {PCIE1, PCIE1, PCIE1, PCIE1,
+ XAUI_FM1_MAC10, XAUI_FM1_MAC10,
+ XAUI_FM1_MAC10, XAUI_FM1_MAC10}},
+ {0x9A, {PCIE1, PCIE1,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ XAUI_FM1_MAC10, XAUI_FM1_MAC10,
+ XAUI_FM1_MAC10, XAUI_FM1_MAC10}},
+ {0xB2, {PCIE1, PCIE1, PCIE1, PCIE1,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ XFI_FM1_MAC9, XFI_FM1_MAC10}},
+ {0xC3, {XAUI_FM1_MAC9, XAUI_FM1_MAC9,
+ XAUI_FM1_MAC9, XAUI_FM1_MAC9,
+ SRIO1, SRIO1, SRIO1, SRIO1}},
+ {}
+};
+static struct serdes_config *serdes_cfg_tbl[] = {
+ serdes1_cfg_tbl,
+ serdes2_cfg_tbl,
+};
+
+enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane)
+{
+ struct serdes_config *ptr;
+
+ if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+ return 0;
+
+ ptr = serdes_cfg_tbl[serdes];
+ while (ptr->protocol) {
+ if (ptr->protocol == cfg)
+ return ptr->lanes[lane];
+ ptr++;
+ }
+
+ return 0;
+}
+
+int is_serdes_prtcl_valid(int serdes, u32 prtcl)
+{
+ int i;
+ struct serdes_config *ptr;
+
+ if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+ return 0;
+
+ ptr = serdes_cfg_tbl[serdes];
+ while (ptr->protocol) {
+ if (ptr->protocol == prtcl)
+ break;
+ ptr++;
+ }
+
+ if (!ptr->protocol)
+ return 0;
+
+ for (i = 0; i < SRDS_MAX_LANES; i++) {
+ if (ptr->lanes[i] != NONE)
+ return 1;
+ }
+
+ return 0;
+}
diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
index e8989bd..2be192d 100644
--- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c
+++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
@@ -76,11 +76,15 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
#if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC111)
puts("Work-around for Erratum ESDHC111 enabled\n");
#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_A004468
+ puts("Work-around for Erratum A004468 enabled\n");
+#endif
#if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC135)
puts("Work-around for Erratum ESDHC135 enabled\n");
#endif
-#if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC136)
- puts("Work-around for Erratum ESDHC136 enabled\n");
+#if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC13)
+ if (SVR_MAJ(svr) < 3)
+ puts("Work-around for Erratum ESDHC13 enabled\n");
#endif
#if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC_A001)
puts("Work-around for Erratum ESDHC-A001 enabled\n");
@@ -127,6 +131,12 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
#ifdef CONFIG_SYS_FSL_ERRATUM_A004510
puts("Work-around for Erratum A004510 enabled\n");
#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
+ puts("Work-around for Erratum SRIO-A004034 enabled\n");
+#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_A_004934
+ puts("Work-around for Erratum A004934 enabled\n");
+#endif
return 0;
}
diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c
index 5ddb294..db232e6 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu.c
@@ -60,20 +60,32 @@ int checkcpu (void)
uint major, minor;
struct cpu_type *cpu;
char buf1[32], buf2[32];
-#if defined(CONFIG_DDR_CLK_FREQ) || defined(CONFIG_FSL_CORENET)
+#if (defined(CONFIG_DDR_CLK_FREQ) || \
+ defined(CONFIG_FSL_CORENET)) && !defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
#endif /* CONFIG_FSL_CORENET */
-#ifdef CONFIG_DDR_CLK_FREQ
- u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
- >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
-#else
+
+ /*
+ * Cornet platforms use ddr sync bit in RCW to indicate sync vs async
+ * mode. Previous platform use ddr ratio to do the same. This
+ * information is only for display here.
+ */
#ifdef CONFIG_FSL_CORENET
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+ u32 ddr_sync = 0; /* only async mode is supported */
+#else
u32 ddr_sync = ((gur->rcwsr[5]) & FSL_CORENET_RCWSR5_DDR_SYNC)
>> FSL_CORENET_RCWSR5_DDR_SYNC_SHIFT;
+#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
+#else /* CONFIG_FSL_CORENET */
+#ifdef CONFIG_DDR_CLK_FREQ
+ u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
+ >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
#else
u32 ddr_ratio = 0;
-#endif /* CONFIG_FSL_CORENET */
#endif /* CONFIG_DDR_CLK_FREQ */
+#endif /* CONFIG_FSL_CORENET */
+
unsigned int i, core, nr_cores = cpu_numcores();
u32 mask = cpu_mask();
@@ -127,6 +139,11 @@ int checkcpu (void)
printf(", Version: %d.%d, (0x%08x)\n", major, minor, pvr);
+ if (nr_cores > CONFIG_MAX_CPUS) {
+ panic("\nUnexpected number of cores: %d, max is %d\n",
+ nr_cores, CONFIG_MAX_CPUS);
+ }
+
get_sys_info(&sysinfo);
puts("Clock Configuration:");
@@ -181,6 +198,10 @@ int checkcpu (void)
}
#endif
+#if defined(CONFIG_FSL_IFC)
+ printf("IFC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus));
+#endif
+
#ifdef CONFIG_CPM2
printf("CPM: %s MHz\n", strmhz(buf1, sysinfo.freqSystemBus));
#endif
@@ -196,6 +217,10 @@ int checkcpu (void)
}
#endif
+#ifdef CONFIG_SYS_DPAA_QBMAN
+ printf(" QMAN: %s MHz\n", strmhz(buf1, sysinfo.freqQMAN));
+#endif
+
#ifdef CONFIG_SYS_DPAA_PME
printf(" PME: %s MHz\n", strmhz(buf1, sysinfo.freqPME));
#endif
@@ -270,10 +295,7 @@ reset_85xx_watchdog(void)
/*
* Clear TSR(WIS) bit by writing 1
*/
- unsigned long val;
- val = mfspr(SPRN_TSR);
- val |= TSR_WIS;
- mtspr(SPRN_TSR, val);
+ mtspr(SPRN_TSR, TSR_WIS);
}
#endif /* CONFIG_WATCHDOG */
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index afb5671..736293c 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -295,6 +295,43 @@ static void __fsl_serdes__init(void)
}
__attribute__((weak, alias("__fsl_serdes__init"))) void fsl_serdes_init(void);
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+int enable_cluster_l2(void)
+{
+ int i = 0;
+ u32 cluster;
+ ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ struct ccsr_cluster_l2 __iomem *l2cache;
+
+ cluster = in_be32(&gur->tp_cluster[i].lower);
+ if (cluster & TP_CLUSTER_EOC)
+ return 0;
+
+ /* The first cache has already been set up, so skip it */
+ i++;
+
+ /* Look through the remaining clusters, and set up their caches */
+ do {
+ l2cache = (void __iomem *)(CONFIG_SYS_FSL_CLUSTER_1_L2 + i * 0x40000);
+ cluster = in_be32(&gur->tp_cluster[i].lower);
+
+ /* set stash ID to (cluster) * 2 + 32 + 1 */
+ clrsetbits_be32(&l2cache->l2csr1, 0xff, 32 + i * 2 + 1);
+
+ printf("enable l2 for cluster %d %p\n", i, l2cache);
+
+ out_be32(&l2cache->l2csr0, L2CSR0_L2FI|L2CSR0_L2LFC);
+ while ((in_be32(&l2cache->l2csr0) &
+ (L2CSR0_L2FI|L2CSR0_L2LFC)) != 0)
+ ;
+ out_be32(&l2cache->l2csr0, L2CSR0_L2E);
+ i++;
+ } while (!(cluster & TP_CLUSTER_EOC));
+
+ return 0;
+}
+#endif
+
/*
* Initialize L2 as cache.
*
@@ -306,7 +343,12 @@ int cpu_init_r(void)
{
__maybe_unused u32 svr = get_svr();
#ifdef CONFIG_SYS_LBC_LCRR
- volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
+ fsl_lbc_t *lbc = (void __iomem *)LBC_BASE_ADDR;
+#endif
+#ifdef CONFIG_L2_CACHE
+ ccsr_l2cache_t *l2cache = (void __iomem *)CONFIG_SYS_MPC85xx_L2_ADDR;
+#elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
+ struct ccsr_cluster_l2 * l2cache = (void __iomem *)CONFIG_SYS_FSL_CLUSTER_1_L2;
#endif
#if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \
@@ -356,7 +398,6 @@ int cpu_init_r(void)
puts ("L2: ");
#if defined(CONFIG_L2_CACHE)
- volatile ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR;
volatile uint cache_ctl;
uint ver;
u32 l2siz_field;
@@ -467,6 +508,11 @@ int cpu_init_r(void)
}
skip_l2:
+#elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
+ if (l2cache->l2csr0 & L2CSR0_L2E)
+ printf("%d KB enabled\n", (l2cache->l2cfg0 & 0x3fff) * 64);
+
+ enable_cluster_l2();
#else
puts("disabled\n");
#endif
@@ -478,7 +524,7 @@ skip_l2:
#ifdef CONFIG_SYS_SRIO
srio_init();
-#ifdef CONFIG_FSL_CORENET
+#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER
char *s = getenv("bootmaster");
if (s) {
if (!strcmp(s, "SRIO1")) {
@@ -497,11 +543,13 @@ skip_l2:
setup_mp();
#endif
-#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC136
+#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC13
{
- void *p;
- p = (void *)CONFIG_SYS_DCSRBAR + 0x20520;
- setbits_be32(p, 1 << (31 - 14));
+ if (SVR_MAJ(svr) < 3) {
+ void *p;
+ p = (void *)CONFIG_SYS_DCSRBAR + 0x20520;
+ setbits_be32(p, 1 << (31 - 14));
+ }
}
#endif
diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
index ca4ed62..f118dd5 100644
--- a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
+++ b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
@@ -18,12 +18,14 @@
void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
unsigned int ctrl_num)
{
- unsigned int i;
+ unsigned int i, bus_width;
volatile ccsr_ddr_t *ddr;
u32 temp_sdram_cfg;
+ u32 total_gb_size_per_controller;
+ int timeout;
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
+ int timeout_save;
volatile ccsr_local_ecm_t *ecm = (void *)CONFIG_SYS_MPC85xx_ECM_ADDR;
- u32 total_gb_size_per_controller;
unsigned int csn_bnds_backup = 0, cs_sa, cs_ea, *csn_bnds_t;
int csn = -1;
#endif
@@ -52,8 +54,8 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
return;
}
- out_be32(&ddr->eor, regs->ddr_eor);
-
+ if (regs->ddr_eor)
+ out_be32(&ddr->eor, regs->ddr_eor);
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
debug("Workaround for ERRATUM_DDR111_DDR134\n");
for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
@@ -121,6 +123,11 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
out_be32(&ddr->timing_cfg_5, regs->timing_cfg_5);
out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl);
out_be32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl);
+ if (regs->ddr_wrlvl_cntl_2)
+ out_be32(&ddr->ddr_wrlvl_cntl_2, regs->ddr_wrlvl_cntl_2);
+ if (regs->ddr_wrlvl_cntl_3)
+ out_be32(&ddr->ddr_wrlvl_cntl_3, regs->ddr_wrlvl_cntl_3);
+
out_be32(&ddr->ddr_sr_cntr, regs->ddr_sr_cntr);
out_be32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1);
out_be32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2);
@@ -134,6 +141,9 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
out_be32(&ddr->debug[i], regs->debug[i]);
}
}
+#ifdef CONFIG_SYS_FSL_ERRATUM_A_004934
+ out_be32(&ddr->debug[28], 0x00003000);
+#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR_A003474
out_be32(&ddr->debug[12], 0x00000015);
@@ -270,9 +280,48 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
out_be32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN);
asm volatile("sync;isync");
+ total_gb_size_per_controller = 0;
+ for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+ if (!(regs->cs[i].config & 0x80000000))
+ continue;
+ total_gb_size_per_controller += 1 << (
+ ((regs->cs[i].config >> 14) & 0x3) + 2 +
+ ((regs->cs[i].config >> 8) & 0x7) + 12 +
+ ((regs->cs[i].config >> 0) & 0x7) + 8 +
+ 3 - ((regs->ddr_sdram_cfg >> 19) & 0x3) -
+ 26); /* minus 26 (count of 64M) */
+ }
+ if (fsl_ddr_get_intl3r() & 0x80000000) /* 3-way interleaving */
+ total_gb_size_per_controller *= 3;
+ else if (regs->cs[0].config & 0x20000000) /* 2-way interleaving */
+ total_gb_size_per_controller <<= 1;
+ /*
+ * total memory / bus width = transactions needed
+ * transactions needed / data rate = seconds
+ * to add plenty of buffer, double the time
+ * For example, 2GB on 666MT/s 64-bit bus takes about 402ms
+ * Let's wait for 800ms
+ */
+ bus_width = 3 - ((ddr->sdram_cfg & SDRAM_CFG_DBW_MASK)
+ >> SDRAM_CFG_DBW_SHIFT);
+ timeout = ((total_gb_size_per_controller << (6 - bus_width)) * 100 /
+ (get_ddr_freq(0) >> 20)) << 1;
+#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
+ timeout_save = timeout;
+#endif
+ total_gb_size_per_controller >>= 4; /* shift down to gb size */
+ debug("total %d GB\n", total_gb_size_per_controller);
+ debug("Need to wait up to %d * 10ms\n", timeout);
+
/* Poll DDR_SDRAM_CFG_2[D_INIT] bit until auto-data init is done. */
- while (in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT)
+ while ((in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) &&
+ (timeout >= 0)) {
udelay(10000); /* throttle polling rate */
+ timeout--;
+ }
+
+ if (timeout <= 0)
+ printf("Waiting for D_INIT timeout. Memory may not work.\n");
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
/* continue this workaround */
@@ -330,23 +379,9 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
while (in_be32(&ddr->debug[1]) & 0x400)
udelay(10000); /* throttle polling rate */
- /* 7. Wait for 400ms/GB */
- total_gb_size_per_controller = 0;
- for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
- if (i == csn) {
- total_gb_size_per_controller +=
- ((csn_bnds_backup & 0xFFFF) >> 6)
- - (csn_bnds_backup >> 22) + 1;
- } else {
- total_gb_size_per_controller +=
- ((regs->cs[i].bnds & 0xFFFF) >> 6)
- - (regs->cs[i].bnds >> 22) + 1;
- }
- }
- if (in_be32(&ddr->sdram_cfg) & 0x80000)
- total_gb_size_per_controller <<= 1;
- debug("Wait for %d ms\n", total_gb_size_per_controller * 400);
- udelay(total_gb_size_per_controller * 400000);
+ /* 7. Wait for state machine 2nd run, roughly 400ms/GB */
+ debug("Wait for %d * 10ms\n", timeout_save);
+ udelay(timeout_save * 10000);
/* 8. Set sdram_cfg_2[dinit] if options requires */
setbits_be32(&ddr->sdram_cfg_2,
@@ -354,8 +389,16 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
debug("Setting sdram_cfg_2 to 0x%08x\n", in_be32(&ddr->sdram_cfg_2));
/* 9. Poll until dinit is cleared */
- while (in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT)
- udelay(10000);
+ timeout = timeout_save;
+ debug("Need to wait up to %d * 10ms\n", timeout);
+ while ((in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) &&
+ (timeout >= 0)) {
+ udelay(10000); /* throttle polling rate */
+ timeout--;
+ }
+
+ if (timeout <= 0)
+ printf("Waiting for D_INIT timeout. Memory may not work.\n");
/* 10. Clear EEBACR[3] */
clrbits_be32(&ecm->eebacr, 10000000);
diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c
index a0a9b4c..ab09330 100644
--- a/arch/powerpc/cpu/mpc85xx/fdt.c
+++ b/arch/powerpc/cpu/mpc85xx/fdt.c
@@ -47,8 +47,8 @@ extern void ft_srio_setup(void *blob);
void ft_fixup_cpu(void *blob, u64 memory_limit)
{
int off;
- ulong spin_tbl_addr = get_spin_phys_addr();
- u32 bootpg = determine_mp_bootpg();
+ phys_addr_t spin_tbl_addr = get_spin_phys_addr();
+ u32 bootpg = determine_mp_bootpg(NULL);
u32 id = get_my_id();
const char *enable_method;
@@ -97,7 +97,16 @@ void ft_fixup_cpu(void *blob, u64 memory_limit)
if ((u64)bootpg < memory_limit) {
off = fdt_add_mem_rsv(blob, bootpg, (u64)4096);
if (off < 0)
- printf("%s: %s\n", __FUNCTION__, fdt_strerror(off));
+ printf("Failed to reserve memory for bootpg: %s\n",
+ fdt_strerror(off));
+ }
+ /* Reserve spin table page */
+ if (spin_tbl_addr < memory_limit) {
+ off = fdt_add_mem_rsv(blob,
+ (spin_tbl_addr & ~0xffful), 4096);
+ if (off < 0)
+ printf("Failed to reserve memory for spin table: %s\n",
+ fdt_strerror(off));
}
}
#endif
@@ -220,12 +229,19 @@ static inline void ft_fixup_l2cache(void *blob)
/* we dont bother w/L3 since no platform of this type has one */
}
-#elif defined(CONFIG_BACKSIDE_L2_CACHE)
+#elif defined(CONFIG_BACKSIDE_L2_CACHE) || \
+ defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
static inline void ft_fixup_l2cache(void *blob)
{
int off, l2_off, l3_off = -1;
u32 *ph;
+#ifdef CONFIG_BACKSIDE_L2_CACHE
u32 l2cfg0 = mfspr(SPRN_L2CFG0);
+#else
+ struct ccsr_cluster_l2 *l2cache =
+ (struct ccsr_cluster_l2 __iomem *)(CONFIG_SYS_FSL_CLUSTER_1_L2);
+ u32 l2cfg0 = in_be32(&l2cache->l2cfg0);
+#endif
u32 size, line_size, num_ways, num_sets;
int has_l2 = 1;
@@ -257,7 +273,12 @@ static inline void ft_fixup_l2cache(void *blob)
if (has_l2) {
#ifdef CONFIG_SYS_CACHE_STASHING
u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+ /* Only initialize every eighth thread */
+ if (reg && !((*reg) % 8))
+#else
if (reg)
+#endif
fdt_setprop_cell(blob, l2_off, "cache-stash-id",
(*reg * 2) + 32 + 1);
#endif
@@ -390,6 +411,11 @@ static void ft_fixup_dpaa_clks(void *blob)
#endif
#endif
+#ifdef CONFIG_SYS_DPAA_QBMAN
+ do_fixup_by_compat_u32(blob, "fsl,qman",
+ "clock-frequency", sysinfo.freqQMAN, 1);
+#endif
+
#ifdef CONFIG_SYS_DPAA_PME
do_fixup_by_compat_u32(blob, "fsl,pme",
"clock-frequency", sysinfo.freqPME, 1);
diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c
new file mode 100644
index 0000000..01dcdf6
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c
@@ -0,0 +1,203 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_serdes.h>
+#include <asm/immap_85xx.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/fsl_law.h>
+#include <asm/errno.h>
+#include "fsl_corenet2_serdes.h"
+
+static u64 serdes1_prtcl_map;
+static u64 serdes2_prtcl_map;
+#ifdef CONFIG_SYS_FSL_SRDS_3
+static u64 serdes3_prtcl_map;
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_4
+static u64 serdes4_prtcl_map;
+#endif
+
+#ifdef DEBUG
+static const char *serdes_prtcl_str[] = {
+ [NONE] = "NA",
+ [PCIE1] = "PCIE1",
+ [PCIE2] = "PCIE2",
+ [PCIE3] = "PCIE3",
+ [PCIE4] = "PCIE4",
+ [SATA1] = "SATA1",
+ [SATA2] = "SATA2",
+ [SRIO1] = "SRIO1",
+ [SRIO2] = "SRIO2",
+ [SGMII_FM1_DTSEC1] = "SGMII_FM1_DTSEC1",
+ [SGMII_FM1_DTSEC2] = "SGMII_FM1_DTSEC2",
+ [SGMII_FM1_DTSEC3] = "SGMII_FM1_DTSEC3",
+ [SGMII_FM1_DTSEC4] = "SGMII_FM1_DTSEC4",
+ [SGMII_FM1_DTSEC5] = "SGMII_FM1_DTSEC5",
+ [SGMII_FM1_DTSEC6] = "SGMII_FM1_DTSEC6",
+ [SGMII_FM2_DTSEC1] = "SGMII_FM2_DTSEC1",
+ [SGMII_FM2_DTSEC2] = "SGMII_FM2_DTSEC2",
+ [SGMII_FM2_DTSEC3] = "SGMII_FM2_DTSEC3",
+ [SGMII_FM2_DTSEC4] = "SGMII_FM2_DTSEC4",
+ [XAUI_FM1] = "XAUI_FM1",
+ [XAUI_FM2] = "XAUI_FM2",
+ [AURORA] = "DEBUG",
+ [CPRI1] = "CPRI1",
+ [CPRI2] = "CPRI2",
+ [CPRI3] = "CPRI3",
+ [CPRI4] = "CPRI4",
+ [CPRI5] = "CPRI5",
+ [CPRI6] = "CPRI6",
+ [CPRI7] = "CPRI7",
+ [CPRI8] = "CPRI8",
+ [XAUI_FM1_MAC9] = "XAUI_FM1_MAC9",
+ [XAUI_FM1_MAC10] = "XAUI_FM1_MAC10",
+ [XAUI_FM2_MAC9] = "XAUI_FM2_MAC9",
+ [XAUI_FM2_MAC10] = "XAUI_FM2_MAC10",
+ [HIGIG_FM1_MAC9] = "HiGig_FM1_MAC9",
+ [HIGIG_FM1_MAC10] = "HiGig_FM1_MAC10",
+ [HIGIG_FM2_MAC9] = "HiGig_FM2_MAC9",
+ [HIGIG_FM2_MAC10] = "HiGig_FM2_MAC10",
+ [QSGMII_FM1_A] = "QSGMII_FM1_A",
+ [QSGMII_FM1_B] = "QSGMII_FM1_B",
+ [QSGMII_FM2_A] = "QSGMII_FM2_A",
+ [QSGMII_FM2_B] = "QSGMII_FM2_B",
+ [XFI_FM1_MAC9] = "XFI_FM1_MAC9",
+ [XFI_FM1_MAC10] = "XFI_FM1_MAC10",
+ [XFI_FM2_MAC9] = "XFI_FM2_MAC9",
+ [XFI_FM2_MAC10] = "XFI_FM2_MAC10",
+ [INTERLAKEN] = "INTERLAKEN",
+};
+#endif
+
+int is_serdes_configured(enum srds_prtcl device)
+{
+ u64 ret = 0;
+
+ ret |= (1ULL << device) & serdes1_prtcl_map;
+ ret |= (1ULL << device) & serdes2_prtcl_map;
+#ifdef CONFIG_SYS_FSL_SRDS_3
+ ret |= (1ULL << device) & serdes3_prtcl_map;
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_4
+ ret |= (1ULL << device) & serdes4_prtcl_map;
+#endif
+
+ return !!ret;
+}
+
+int serdes_get_first_lane(u32 sd, enum srds_prtcl device)
+{
+ const ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 cfg = in_be32(&gur->rcwsr[4]);
+ int i;
+
+ switch (sd) {
+ case FSL_SRDS_1:
+ cfg &= FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
+ cfg >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
+ break;
+ case FSL_SRDS_2:
+ cfg &= FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
+ cfg >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
+ break;
+#ifdef CONFIG_SYS_FSL_SRDS_3
+ case FSL_SRDS_3:
+ cfg &= FSL_CORENET2_RCWSR4_SRDS3_PRTCL;
+ cfg >>= FSL_CORENET2_RCWSR4_SRDS3_PRTCL_SHIFT;
+ break;
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_4
+ case FSL_SRDS_4:
+ cfg &= FSL_CORENET2_RCWSR4_SRDS4_PRTCL;
+ cfg >>= FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT;
+ break;
+#endif
+ default:
+ printf("invalid SerDes%d\n", sd);
+ break;
+ }
+ /* Is serdes enabled at all? */
+ if (unlikely(cfg == 0))
+ return -ENODEV;
+
+ for (i = 0; i < SRDS_MAX_LANES; i++) {
+ if (serdes_get_prtcl(sd, cfg, i) == device)
+ return i;
+ }
+
+ return -ENODEV;
+}
+
+u64 serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift)
+{
+ ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u64 serdes_prtcl_map = 0;
+ u32 cfg;
+ int lane;
+
+ cfg = in_be32(&gur->rcwsr[4]) & sd_prctl_mask;
+ /* Is serdes enabled at all? */
+ if (!cfg) {
+ printf("SERDES%d is not enabled\n", sd + 1);
+ return 0;
+ }
+
+ cfg >>= sd_prctl_shift;
+ printf("Using SERDES%d Protocol: 0x%x\n", sd + 1, cfg);
+ if (!is_serdes_prtcl_valid(sd, cfg))
+ printf("SERDES%d[PRTCL] = 0x%x is not valid\n", sd + 1, cfg);
+
+ for (lane = 0; lane < SRDS_MAX_LANES; lane++) {
+ enum srds_prtcl lane_prtcl = serdes_get_prtcl(sd, cfg, lane);
+ serdes_prtcl_map |= (1ULL << lane_prtcl);
+ }
+
+ return serdes_prtcl_map;
+}
+
+void fsl_serdes_init(void)
+{
+
+ serdes1_prtcl_map = serdes_init(FSL_SRDS_1,
+ CONFIG_SYS_FSL_CORENET_SERDES_ADDR,
+ FSL_CORENET2_RCWSR4_SRDS1_PRTCL,
+ FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT);
+ serdes2_prtcl_map = serdes_init(FSL_SRDS_2,
+ CONFIG_SYS_FSL_CORENET_SERDES_ADDR + FSL_SRDS_2 * 0x1000,
+ FSL_CORENET2_RCWSR4_SRDS2_PRTCL,
+ FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT);
+#ifdef CONFIG_SYS_FSL_SRDS_3
+ serdes3_prtcl_map = serdes_init(FSL_SRDS_3,
+ CONFIG_SYS_FSL_CORENET_SERDES_ADDR + FSL_SRDS_3 * 0x1000,
+ FSL_CORENET2_RCWSR4_SRDS3_PRTCL,
+ FSL_CORENET2_RCWSR4_SRDS3_PRTCL_SHIFT);
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_4
+ serdes4_prtcl_map = serdes_init(FSL_SRDS_4,
+ CONFIG_SYS_FSL_CORENET_SERDES_ADDR + FSL_SRDS_4 * 0x1000,
+ FSL_CORENET2_RCWSR4_SRDS4_PRTCL,
+ FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT);
+#endif
+
+}
diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.h b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.h
new file mode 100644
index 0000000..2258f41
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __FSL_CORENET2_SERDES_H
+#define __FSL_CORENET2_SERDES_H
+
+int is_serdes_prtcl_valid(int serdes, u32 prtcl);
+int serdes_lane_enabled(int lane);
+enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane);
+#endif /* __FSL_CORENET2_SERDES_H */
diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
index 2a68060..e6b1b1b 100644
--- a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
@@ -92,10 +92,17 @@ static const struct {
{ 17, 163, FSL_SRDS_BANK_2 },
{ 18, 164, FSL_SRDS_BANK_2 },
{ 19, 165, FSL_SRDS_BANK_2 },
+#ifdef CONFIG_PPC_P4080
{ 20, 170, FSL_SRDS_BANK_3 },
{ 21, 171, FSL_SRDS_BANK_3 },
{ 22, 172, FSL_SRDS_BANK_3 },
{ 23, 173, FSL_SRDS_BANK_3 },
+#else
+ { 20, 166, FSL_SRDS_BANK_3 },
+ { 21, 167, FSL_SRDS_BANK_3 },
+ { 22, 168, FSL_SRDS_BANK_3 },
+ { 23, 169, FSL_SRDS_BANK_3 },
+#endif
};
int serdes_get_lane_idx(int lane)
@@ -493,6 +500,9 @@ void fsl_serdes_init(void)
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
int cfg;
serdes_corenet_t *srds_regs;
+#ifdef CONFIG_PPC_P5040
+ serdes_corenet_t *srds2_regs;
+#endif
int lane, bank, idx;
int have_bank[SRDS_MAX_BANK] = {};
#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8
@@ -574,6 +584,34 @@ void fsl_serdes_init(void)
}
}
+#ifdef CONFIG_PPC_P5040
+ /*
+ * Lanes on bank 4 on P5040 are commented-out, but for some SERDES
+ * protocols, these lanes are routed to SATA. We use serdes_prtcl_map
+ * to decide whether a protocol is supported on a given lane, so SATA
+ * will be identified as not supported, and therefore not initialized.
+ * So for protocols which use SATA on bank4, we add SATA support in
+ * serdes_prtcl_map.
+ */
+ switch (cfg) {
+ case 0x0:
+ case 0x1:
+ case 0x2:
+ case 0x3:
+ case 0x4:
+ case 0x5:
+ case 0x6:
+ case 0x7:
+ serdes_prtcl_map |= 1 << SATA1 | 1 << SATA2;
+ break;
+ default:
+ srds2_regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES2_ADDR;
+
+ /* We don't need bank 4, so power it down */
+ setbits_be32(&srds2_regs->bank[0].rstctl, SRDS_RSTCTL_SDPD);
+ }
+#endif
+
soc_serdes_init();
#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8
@@ -617,6 +655,38 @@ void fsl_serdes_init(void)
}
}
+#ifdef CONFIG_SYS_FSL_ERRATUM_A004699
+ /*
+ * To avoid the situation that resulted in the P4080 erratum
+ * SERDES-8, a given SerDes bank will use the PLLs from the previous
+ * bank if one of the PLL frequencies is a multiple of the other. For
+ * instance, if bank 3 is running at 2.5GHz and bank 2 is at 1.25GHz,
+ * then bank 3 will use bank 2's PLL. P5040 Erratum A-004699 says
+ * that, in this situation, lane synchronization is not initiated. So
+ * when we detect a bank with a "borrowed" PLL, we have to manually
+ * initiate lane synchronization.
+ */
+ for (bank = FSL_SRDS_BANK_2; bank <= FSL_SRDS_BANK_3; bank++) {
+ /* Determine the first lane for this bank */
+ unsigned int lane;
+
+ for (lane = 0; lane < SRDS_MAX_LANES; lane++)
+ if (lanes[lane].bank == bank)
+ break;
+ idx = lanes[lane].idx;
+
+ /*
+ * Check if the PLL for the bank is borrowed. The UOTHL
+ * bit of the first lane will tell us that.
+ */
+ if (in_be32(&srds_regs->lane[idx].gcr0) & SRDS_GCR0_UOTHL) {
+ /* Manually start lane synchronization */
+ setbits_be32(&srds_regs->bank[bank].pllcr0,
+ SRDS_PLLCR0_PVCOCNT_EN);
+ }
+ }
+#endif
+
#if defined(CONFIG_SYS_P4080_ERRATUM_SERDES8) || defined (CONFIG_SYS_P4080_ERRATUM_SERDES9)
for (lane = 0; lane < SRDS_MAX_LANES; lane++) {
enum srds_prtcl lane_prtcl;
diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h
index f261351..3c551e9 100644
--- a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h
+++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h
@@ -22,9 +22,6 @@
#ifndef __FSL_CORENET_SERDES_H
#define __FSL_CORENET_SERDES_H
-#define SRDS_MAX_LANES 18
-#define SRDS_MAX_BANK 3
-
enum srds_bank {
FSL_SRDS_BANK_1 = 0,
FSL_SRDS_BANK_2 = 1,
diff --git a/arch/powerpc/cpu/mpc85xx/liodn.c b/arch/powerpc/cpu/mpc85xx/liodn.c
index 11881c9..2e53367 100644
--- a/arch/powerpc/cpu/mpc85xx/liodn.c
+++ b/arch/powerpc/cpu/mpc85xx/liodn.c
@@ -40,6 +40,7 @@ int get_dpaa_liodn(enum fsl_dpaa_dev dpaa_dev, u32 *liodns, int liodn_offset)
return liodn_bases[dpaa_dev].num_ids;
}
+#ifdef CONFIG_SYS_SRIO
static void set_srio_liodn(struct srio_liodn_id_table *tbl, int size)
{
int i;
@@ -54,6 +55,7 @@ static void set_srio_liodn(struct srio_liodn_id_table *tbl, int size)
}
}
}
+#endif
static void set_liodn(struct liodn_id_table *tbl, int size)
{
@@ -181,8 +183,10 @@ void set_liodns(void)
/* setup general liodn offsets */
set_liodn(liodn_tbl, liodn_tbl_sz);
+#ifdef CONFIG_SYS_SRIO
/* setup SRIO port liodns */
set_srio_liodn(srio_liodn_tbl, srio_liodn_tbl_sz);
+#endif
/* setup SEC block liodn bases & offsets if we have one */
if (IS_E_PROCESSOR(get_svr())) {
@@ -219,6 +223,7 @@ void set_liodns(void)
#endif
}
+#ifdef CONFIG_SYS_SRIO
static void fdt_fixup_srio_liodn(void *blob, struct srio_liodn_id_table *tbl)
{
int i, srio_off;
@@ -247,6 +252,57 @@ static void fdt_fixup_srio_liodn(void *blob, struct srio_liodn_id_table *tbl)
}
}
}
+#endif
+
+#define CONFIG_SYS_MAX_PCI_EPS 8
+#define CONFIG_SYS_PCI_EP_LIODN_START 256
+
+static void fdt_fixup_pci_liodn_offsets(void *fdt, const char *compat)
+{
+ int off, pci_idx = 0, pci_cnt = 0, i, rc;
+ const uint32_t *base_liodn;
+ uint32_t liodn_offs[CONFIG_SYS_MAX_PCI_EPS + 1] = { 0 };
+
+ /*
+ * Count the number of pci nodes.
+ * It's needed later when the interleaved liodn offsets are generated.
+ */
+ off = fdt_node_offset_by_compatible(fdt, -1, compat);
+ while (off != -FDT_ERR_NOTFOUND) {
+ pci_cnt++;
+ off = fdt_node_offset_by_compatible(fdt, off, compat);
+ }
+
+ for (off = fdt_node_offset_by_compatible(fdt, -1, compat);
+ off != -FDT_ERR_NOTFOUND;
+ off = fdt_node_offset_by_compatible(fdt, off, compat)) {
+ base_liodn = fdt_getprop(fdt, off, "fsl,liodn", &rc);
+ if (!base_liodn) {
+ char path[64];
+
+ if (fdt_get_path(fdt, off, path, sizeof(path)) < 0)
+ strcpy(path, "(unknown)");
+ printf("WARNING Could not get liodn of node %s: %s\n",
+ path, fdt_strerror(rc));
+ continue;
+ }
+ for (i = 0; i < CONFIG_SYS_MAX_PCI_EPS; i++)
+ liodn_offs[i + 1] = CONFIG_SYS_PCI_EP_LIODN_START +
+ i * pci_cnt + pci_idx - *base_liodn;
+ rc = fdt_setprop(fdt, off, "fsl,liodn-offset-list",
+ liodn_offs, sizeof(liodn_offs));
+ if (rc) {
+ char path[64];
+
+ if (fdt_get_path(fdt, off, path, sizeof(path)) < 0)
+ strcpy(path, "(unknown)");
+ printf("WARNING Unable to set fsl,liodn-offset-list for "
+ "node %s: %s\n", path, fdt_strerror(rc));
+ continue;
+ }
+ pci_idx++;
+ }
+}
static void fdt_fixup_liodn_tbl(void *blob, struct liodn_id_table *tbl, int sz)
{
@@ -277,7 +333,9 @@ static void fdt_fixup_liodn_tbl(void *blob, struct liodn_id_table *tbl, int sz)
void fdt_fixup_liodn(void *blob)
{
+#ifdef CONFIG_SYS_SRIO
fdt_fixup_srio_liodn(blob, srio_liodn_tbl);
+#endif
fdt_fixup_liodn_tbl(blob, liodn_tbl, liodn_tbl_sz);
#ifdef CONFIG_SYS_DPAA_FMAN
@@ -295,4 +353,6 @@ void fdt_fixup_liodn(void *blob)
#ifdef CONFIG_SYS_DPAA_RMAN
fdt_fixup_liodn_tbl(blob, rman_liodn_tbl, rman_liodn_tbl_sz);
#endif
+
+ fdt_fixup_pci_liodn_offsets(blob, "fsl,qoriq-pcie-v2.4");
}
diff --git a/arch/powerpc/cpu/mpc85xx/mp.c b/arch/powerpc/cpu/mpc85xx/mp.c
index ffc2a9a..e1197ac 100644
--- a/arch/powerpc/cpu/mpc85xx/mp.c
+++ b/arch/powerpc/cpu/mpc85xx/mp.c
@@ -27,9 +27,13 @@
#include <asm/io.h>
#include <asm/mmu.h>
#include <asm/fsl_law.h>
+#include <asm/fsl_ddr_sdram.h>
#include "mp.h"
DECLARE_GLOBAL_DATA_PTR;
+u32 fsl_ddr_get_intl3r(void);
+
+extern u32 __spin_table[];
u32 get_my_id()
{
@@ -76,17 +80,16 @@ int cpu_status(int nr)
return 0;
if (nr == id) {
- table = (u32 *)get_spin_virt_addr();
+ table = (u32 *)&__spin_table;
printf("table base @ 0x%p\n", table);
} else {
- table = (u32 *)get_spin_virt_addr() + nr * NUM_BOOT_ENTRY;
+ table = (u32 *)&__spin_table + nr * NUM_BOOT_ENTRY;
printf("Running on cpu %d\n", id);
printf("\n");
printf("table @ 0x%p\n", table);
printf(" addr - 0x%08x\n", table[BOOT_ENTRY_ADDR_LOWER]);
- printf(" pir - 0x%08x\n", table[BOOT_ENTRY_PIR]);
printf(" r3 - 0x%08x\n", table[BOOT_ENTRY_R3_LOWER]);
- printf(" r6 - 0x%08x\n", table[BOOT_ENTRY_R6_LOWER]);
+ printf(" pir - 0x%08x\n", table[BOOT_ENTRY_PIR]);
}
return 0;
@@ -149,12 +152,11 @@ static u8 boot_entry_map[4] = {
0,
BOOT_ENTRY_PIR,
BOOT_ENTRY_R3_LOWER,
- BOOT_ENTRY_R6_LOWER,
};
int cpu_release(int nr, int argc, char * const argv[])
{
- u32 i, val, *table = (u32 *)get_spin_virt_addr() + nr * NUM_BOOT_ENTRY;
+ u32 i, val, *table = (u32 *)&__spin_table + nr * NUM_BOOT_ENTRY;
u64 boot_addr;
if (hold_cores_in_reset(1))
@@ -172,8 +174,8 @@ int cpu_release(int nr, int argc, char * const argv[])
boot_addr = simple_strtoull(argv[0], NULL, 16);
- /* handle pir, r3, r6 */
- for (i = 1; i < 4; i++) {
+ /* handle pir, r3 */
+ for (i = 1; i < 3; i++) {
if (argv[i][0] != '-') {
u8 entry = boot_entry_map[i];
val = simple_strtoul(argv[i], NULL, 16);
@@ -191,38 +193,80 @@ int cpu_release(int nr, int argc, char * const argv[])
return 0;
}
-u32 determine_mp_bootpg(void)
+u32 determine_mp_bootpg(unsigned int *pagesize)
{
- /* if we have 4G or more of memory, put the boot page at 4Gb-4k */
- if ((u64)gd->ram_size > 0xfffff000)
- return (0xfffff000);
+ u32 bootpg;
+#ifdef CONFIG_SYS_FSL_ERRATUM_A004468
+ u32 svr = get_svr();
+ u32 granule_size, check;
+ struct law_entry e;
+#endif
- return (gd->ram_size - 4096);
-}
-ulong get_spin_phys_addr(void)
-{
- extern ulong __secondary_start_page;
- extern ulong __spin_table;
+ /* use last 4K of mapped memory */
+ bootpg = ((gd->ram_size > CONFIG_MAX_MEM_MAPPED) ?
+ CONFIG_MAX_MEM_MAPPED : gd->ram_size) +
+ CONFIG_SYS_SDRAM_BASE - 4096;
+ if (pagesize)
+ *pagesize = 4096;
+
+#ifdef CONFIG_SYS_FSL_ERRATUM_A004468
+/*
+ * Erratum A004468 has two parts. The 3-way interleaving applies to T4240,
+ * to be fixed in rev 2.0. The 2-way interleaving applies to many SoCs. But
+ * the way boot page chosen in u-boot avoids hitting this erratum. So only
+ * thw workaround for 3-way interleaving is needed.
+ *
+ * To make sure boot page translation works with 3-Way DDR interleaving
+ * enforce a check for the following constrains
+ * 8K granule size requires BRSIZE=8K and
+ * bootpg >> log2(BRSIZE) %3 == 1
+ * 4K and 1K granule size requires BRSIZE=4K and
+ * bootpg >> log2(BRSIZE) %3 == 0
+ */
+ if (SVR_SOC_VER(svr) == SVR_T4240 && SVR_MAJ(svr) < 2) {
+ e = find_law(bootpg);
+ switch (e.trgt_id) {
+ case LAW_TRGT_IF_DDR_INTLV_123:
+ granule_size = fsl_ddr_get_intl3r() & 0x1f;
+ if (granule_size == FSL_DDR_3WAY_8KB_INTERLEAVING) {
+ if (pagesize)
+ *pagesize = 8192;
+ bootpg &= 0xffffe000; /* align to 8KB */
+ check = bootpg >> 13;
+ while ((check % 3) != 1)
+ check--;
+ bootpg = check << 13;
+ debug("Boot page (8K) at 0x%08x\n", bootpg);
+ break;
+ } else {
+ bootpg &= 0xfffff000; /* align to 4KB */
+ check = bootpg >> 12;
+ while ((check % 3) != 0)
+ check--;
+ bootpg = check << 12;
+ debug("Boot page (4K) at 0x%08x\n", bootpg);
+ }
+ break;
+ default:
+ break;
+ }
+ }
+#endif /* CONFIG_SYS_FSL_ERRATUM_A004468 */
- return (determine_mp_bootpg() +
- (ulong)&__spin_table - (ulong)&__secondary_start_page);
+ return bootpg;
}
-ulong get_spin_virt_addr(void)
+phys_addr_t get_spin_phys_addr(void)
{
- extern ulong __secondary_start_page;
- extern ulong __spin_table;
-
- return (CONFIG_BPTR_VIRT_ADDR +
- (ulong)&__spin_table - (ulong)&__secondary_start_page);
+ return virt_to_phys(&__spin_table);
}
#ifdef CONFIG_FSL_CORENET
-static void plat_mp_up(unsigned long bootpg)
+static void plat_mp_up(unsigned long bootpg, unsigned int pagesize)
{
- u32 cpu_up_mask, whoami;
- u32 *table = (u32 *)get_spin_virt_addr();
+ u32 cpu_up_mask, whoami, brsize = LAW_SIZE_4K;
+ u32 *table = (u32 *)&__spin_table;
volatile ccsr_gur_t *gur;
volatile ccsr_local_t *ccm;
volatile ccsr_rcpm_t *rcpm;
@@ -241,7 +285,11 @@ static void plat_mp_up(unsigned long bootpg)
out_be32(&ccm->bstrl, bootpg);
e = find_law(bootpg);
- out_be32(&ccm->bstrar, LAW_EN | e.trgt_id << 20 | LAW_SIZE_4K);
+ /* pagesize is only 4K or 8K */
+ if (pagesize == 8192)
+ brsize = LAW_SIZE_8K;
+ out_be32(&ccm->bstrar, LAW_EN | e.trgt_id << 20 | brsize);
+ debug("BRSIZE is 0x%x\n", brsize);
/* readback to sync write */
in_be32(&ccm->bstrar);
@@ -294,10 +342,10 @@ static void plat_mp_up(unsigned long bootpg)
#endif
}
#else
-static void plat_mp_up(unsigned long bootpg)
+static void plat_mp_up(unsigned long bootpg, unsigned int pagesize)
{
u32 up, cpu_up_mask, whoami;
- u32 *table = (u32 *)get_spin_virt_addr();
+ u32 *table = (u32 *)&__spin_table;
volatile u32 bpcr;
volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
@@ -374,27 +422,52 @@ static void plat_mp_up(unsigned long bootpg)
void cpu_mp_lmb_reserve(struct lmb *lmb)
{
- u32 bootpg = determine_mp_bootpg();
+ u32 bootpg = determine_mp_bootpg(NULL);
lmb_reserve(lmb, bootpg, 4096);
}
void setup_mp(void)
{
- extern ulong __secondary_start_page;
- extern ulong __bootpg_addr;
- ulong fixup = (ulong)&__secondary_start_page;
- u32 bootpg = determine_mp_bootpg();
+ extern u32 __secondary_start_page;
+ extern u32 __bootpg_addr, __spin_table_addr, __second_half_boot_page;
+
+ int i;
+ ulong fixup = (u32)&__secondary_start_page;
+ u32 bootpg, bootpg_map, pagesize;
+
+ bootpg = determine_mp_bootpg(&pagesize);
+
+ /*
+ * pagesize is only 4K or 8K
+ * we only use the last 4K of boot page
+ * bootpg_map saves the address for the boot page
+ * 8K is used for the workaround of 3-way DDR interleaving
+ */
+
+ bootpg_map = bootpg;
+
+ if (pagesize == 8192)
+ bootpg += 4096; /* use 2nd half */
/* Some OSes expect secondary cores to be held in reset */
if (hold_cores_in_reset(0))
return;
- /* Store the bootpg's SDRAM address for use by secondary CPU cores */
- __bootpg_addr = bootpg;
+ /*
+ * Store the bootpg's cache-able half address for use by secondary
+ * CPU cores to continue to boot
+ */
+ __bootpg_addr = (u32)virt_to_phys(&__second_half_boot_page);
+
+ /* Store spin table's physical address for use by secondary cores */
+ __spin_table_addr = (u32)get_spin_phys_addr();
+
+ /* flush bootpg it before copying invalidate any staled cacheline */
+ flush_cache(bootpg, 4096);
/* look for the tlb covering the reset page, there better be one */
- int i = find_tlb_idx((void *)CONFIG_BPTR_VIRT_ADDR, 1);
+ i = find_tlb_idx((void *)CONFIG_BPTR_VIRT_ADDR, 1);
/* we found a match */
if (i != -1) {
@@ -407,7 +480,7 @@ void setup_mp(void)
memcpy((void *)CONFIG_BPTR_VIRT_ADDR, (void *)fixup, 4096);
- plat_mp_up(bootpg);
+ plat_mp_up(bootpg_map, pagesize);
} else {
puts("WARNING: No reset page TLB. "
"Skipping secondary core setup\n");
diff --git a/arch/powerpc/cpu/mpc85xx/mp.h b/arch/powerpc/cpu/mpc85xx/mp.h
index 87bac37..ad9950b 100644
--- a/arch/powerpc/cpu/mpc85xx/mp.h
+++ b/arch/powerpc/cpu/mpc85xx/mp.h
@@ -3,8 +3,7 @@
#include <asm/mp.h>
-ulong get_spin_phys_addr(void);
-ulong get_spin_virt_addr(void);
+phys_addr_t get_spin_phys_addr(void);
u32 get_my_id(void);
int hold_cores_in_reset(int verbose);
@@ -16,7 +15,7 @@ int hold_cores_in_reset(int verbose);
#define BOOT_ENTRY_PIR 5
#define BOOT_ENTRY_R6_UPPER 6
#define BOOT_ENTRY_R6_LOWER 7
-#define NUM_BOOT_ENTRY 8
+#define NUM_BOOT_ENTRY 16 /* pad to 64 bytes */
#define SIZE_BOOT_ENTRY (NUM_BOOT_ENTRY * sizeof(u32))
#endif
diff --git a/arch/powerpc/cpu/mpc85xx/p5040_ids.c b/arch/powerpc/cpu/mpc85xx/p5040_ids.c
new file mode 100644
index 0000000..878ee3e
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/p5040_ids.c
@@ -0,0 +1,127 @@
+/*
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+
+#ifdef CONFIG_SYS_DPAA_QBMAN
+struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = {
+ /* dqrr liodn, frame data liodn, liodn off, sdest */
+ SET_QP_INFO(1, 2, 1, 0),
+ SET_QP_INFO(3, 4, 2, 1),
+ SET_QP_INFO(5, 6, 3, 2),
+ SET_QP_INFO(7, 8, 4, 3),
+ SET_QP_INFO(9, 10, 5, 0),
+ SET_QP_INFO(11, 12, 6, 1),
+ SET_QP_INFO(13, 14, 7, 2),
+ SET_QP_INFO(15, 16, 8, 3),
+ SET_QP_INFO(17, 18, 9, 0), /* for now, set sdest to 0 */
+ SET_QP_INFO(19, 20, 10, 0), /* for now, set sdest to 0 */
+};
+#endif
+
+struct liodn_id_table liodn_tbl[] = {
+#ifdef CONFIG_SYS_DPAA_QBMAN
+ SET_QMAN_LIODN(31),
+ SET_BMAN_LIODN(32),
+#endif
+
+ SET_SDHC_LIODN(1, 64),
+
+ SET_USB_LIODN(1, "fsl-usb2-mph", 93),
+ SET_USB_LIODN(2, "fsl-usb2-dr", 94),
+
+ SET_SATA_LIODN(1, 95),
+ SET_SATA_LIODN(2, 96),
+
+ SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 195),
+ SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 2, 196),
+ SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 3, 197),
+
+ SET_DMA_LIODN(1, 193),
+ SET_DMA_LIODN(2, 194),
+};
+int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl);
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+struct liodn_id_table fman1_liodn_tbl[] = {
+ SET_FMAN_RX_1G_LIODN(1, 0, 6),
+ SET_FMAN_RX_1G_LIODN(1, 1, 7),
+ SET_FMAN_RX_1G_LIODN(1, 2, 8),
+ SET_FMAN_RX_1G_LIODN(1, 3, 9),
+ SET_FMAN_RX_1G_LIODN(1, 4, 10),
+ SET_FMAN_RX_10G_LIODN(1, 0, 11),
+};
+int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl);
+
+#if (CONFIG_SYS_NUM_FMAN == 2)
+struct liodn_id_table fman2_liodn_tbl[] = {
+ SET_FMAN_RX_1G_LIODN(2, 0, 12),
+ SET_FMAN_RX_1G_LIODN(2, 1, 13),
+ SET_FMAN_RX_1G_LIODN(2, 2, 14),
+ SET_FMAN_RX_1G_LIODN(2, 3, 15),
+ SET_FMAN_RX_1G_LIODN(2, 4, 16),
+ SET_FMAN_RX_10G_LIODN(2, 0, 17),
+};
+int fman2_liodn_tbl_sz = ARRAY_SIZE(fman2_liodn_tbl);
+#endif
+#endif
+
+struct liodn_id_table sec_liodn_tbl[] = {
+ SET_SEC_JR_LIODN_ENTRY(0, 129, 130),
+ SET_SEC_JR_LIODN_ENTRY(1, 131, 132),
+ SET_SEC_JR_LIODN_ENTRY(2, 133, 134),
+ SET_SEC_JR_LIODN_ENTRY(3, 135, 136),
+ SET_SEC_RTIC_LIODN_ENTRY(a, 89),
+ SET_SEC_RTIC_LIODN_ENTRY(b, 90),
+ SET_SEC_RTIC_LIODN_ENTRY(c, 91),
+ SET_SEC_RTIC_LIODN_ENTRY(d, 92),
+ SET_SEC_DECO_LIODN_ENTRY(0, 139, 140),
+ SET_SEC_DECO_LIODN_ENTRY(1, 141, 142),
+ SET_SEC_DECO_LIODN_ENTRY(2, 143, 144),
+ SET_SEC_DECO_LIODN_ENTRY(3, 145, 146),
+};
+int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl);
+
+#ifdef CONFIG_SYS_FSL_RAID_ENGINE
+struct liodn_id_table raide_liodn_tbl[] = {
+ SET_RAID_ENGINE_JQ_LIODN_ENTRY(0, 0, 60),
+ SET_RAID_ENGINE_JQ_LIODN_ENTRY(0, 1, 61),
+ SET_RAID_ENGINE_JQ_LIODN_ENTRY(1, 0, 62),
+ SET_RAID_ENGINE_JQ_LIODN_ENTRY(1, 1, 63),
+};
+int raide_liodn_tbl_sz = ARRAY_SIZE(raide_liodn_tbl);
+#endif
+
+struct liodn_id_table liodn_bases[] = {
+ [FSL_HW_PORTAL_SEC] = SET_LIODN_BASE_2(64, 101),
+#ifdef CONFIG_SYS_DPAA_FMAN
+ [FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(32),
+#endif
+#if (CONFIG_SYS_NUM_FMAN == 2)
+ [FSL_HW_PORTAL_FMAN2] = SET_LIODN_BASE_1(160),
+#endif
+#ifdef CONFIG_SYS_FSL_RAID_ENGINE
+ [FSL_HW_PORTAL_RAID_ENGINE] = SET_LIODN_BASE_1(49),
+#endif
+};
diff --git a/arch/powerpc/cpu/mpc85xx/p5040_serdes.c b/arch/powerpc/cpu/mpc85xx/p5040_serdes.c
new file mode 100644
index 0000000..890b88e
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/p5040_serdes.c
@@ -0,0 +1,117 @@
+/*
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_serdes.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include "fsl_corenet_serdes.h"
+
+/*
+ * Note: For P5040, the fourth SerDes bank (with two lanes) is on SerDes2, but
+ * U-boot only supports one SerDes controller. Therefore, we ignore bank 4 in
+ * this table. This works because most of the SerDes code is for errata
+ * work-arounds, and there are no P5040 errata that effect bank 4.
+ */
+
+static u8 serdes_cfg_tbl[][SRDS_MAX_LANES] = {
+ [0x00] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4, SGMII_FM1_DTSEC1,
+ SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2, /* SATA1, SATA2, */ },
+ [0x01] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2,
+ SGMII_FM1_DTSEC3, SGMII_FM2_DTSEC4, XAUI_FM1, XAUI_FM1,
+ XAUI_FM1, XAUI_FM1, XAUI_FM2, XAUI_FM2, XAUI_FM2,
+ XAUI_FM2, /* SATA1, SATA2 */ },
+ [0x02] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, SGMII_FM1_DTSEC3,
+ SGMII_FM1_DTSEC4, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4,
+ XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM2, XAUI_FM2,
+ XAUI_FM2, XAUI_FM2, /* SATA1, SATA2 */ },
+ [0x03] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, SGMII_FM2_DTSEC1,
+ SGMII_FM2_DTSEC2, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4,
+ SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3,
+ SGMII_FM1_DTSEC4, XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2,
+ /* SATA1, SATA2 */ },
+ [0x04] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE3, SGMII_FM2_DTSEC1,
+ SGMII_FM2_DTSEC2, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4,
+ SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3,
+ SGMII_FM1_DTSEC4, XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2,
+ /* SATA1, SATA2 */ },
+ [0x05] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE3, SGMII_FM1_DTSEC3,
+ SGMII_FM1_DTSEC4, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4,
+ XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM2, XAUI_FM2,
+ XAUI_FM2, XAUI_FM2, /* SATA1, SATA2 */ },
+ [0x06] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4, SGMII_FM1_DTSEC1,
+ SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+ XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2, /* SATA1, SATA2 */ },
+ [0x07] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1,
+ SGMII_FM1_DTSEC3, SGMII_FM2_DTSEC4, XAUI_FM1, XAUI_FM1,
+ XAUI_FM1, XAUI_FM1, XAUI_FM2, XAUI_FM2, XAUI_FM2,
+ XAUI_FM2, /* SATA1, SATA2 */ },
+ [0x11] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2,
+ AURORA, AURORA, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, NONE, NONE, SATA1, SATA2,
+ /* NONE, NONE */ },
+ [0x15] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2,
+ AURORA, AURORA, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1,
+ NONE, NONE, SATA1, SATA2, /* NONE, NONE */ },
+ [0x2a] = {PCIE1, PCIE1, PCIE3, PCIE3, PCIE2, PCIE2, PCIE2, PCIE2,
+ AURORA, AURORA, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, XAUI_FM2, XAUI_FM2,
+ XAUI_FM2, XAUI_FM2, /* NONE, NONE */ },
+ [0x34] = {PCIE1, PCIE1, PCIE1, PCIE1, SGMII_FM1_DTSEC1,
+ SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, AURORA,
+ AURORA, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, NONE,
+ NONE, SATA1, SATA2, /* NONE, NONE */ },
+ [0x35] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, AURORA, AURORA, XAUI_FM1,
+ XAUI_FM1, XAUI_FM1, XAUI_FM1, NONE, NONE, SATA1, SATA2,
+ /* NONE, NONE */ },
+ [0x36] = {PCIE1, PCIE1, PCIE3, PCIE3, SGMII_FM1_DTSEC1,
+ SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, AURORA,
+ AURORA, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, NONE,
+ NONE, SATA1, SATA2, /* NONE, NONE */ },
+};
+
+enum srds_prtcl serdes_get_prtcl(int cfg, int lane)
+{
+ if (!serdes_lane_enabled(lane))
+ return NONE;
+
+ return serdes_cfg_tbl[cfg][lane];
+}
+
+int is_serdes_prtcl_valid(u32 prtcl)
+{
+ int i;
+
+ if (prtcl > ARRAY_SIZE(serdes_cfg_tbl))
+ return 0;
+
+ for (i = 0; i < SRDS_MAX_LANES; i++) {
+ if (serdes_cfg_tbl[prtcl][i] != NONE)
+ return 1;
+ }
+
+ return 0;
+}
diff --git a/arch/powerpc/cpu/mpc85xx/portals.c b/arch/powerpc/cpu/mpc85xx/portals.c
index 6199633..b59ef69 100644
--- a/arch/powerpc/cpu/mpc85xx/portals.c
+++ b/arch/powerpc/cpu/mpc85xx/portals.c
@@ -182,14 +182,18 @@ void fdt_fixup_qportals(void *blob)
{
int off, err;
unsigned int maj, min;
+ unsigned int ip_cfg;
u32 rev_1 = in_be32(&qman->ip_rev_1);
+ u32 rev_2 = in_be32(&qman->ip_rev_2);
char compat[64];
int compat_len;
maj = (rev_1 >> 8) & 0xff;
min = rev_1 & 0xff;
+ ip_cfg = rev_2 & 0xff;
- compat_len = sprintf(compat, "fsl,qman-portal-%u.%u", maj, min) + 1;
+ compat_len = sprintf(compat, "fsl,qman-portal-%u.%u.%u",
+ maj, min, ip_cfg) + 1;
compat_len += sprintf(compat + compat_len, "fsl,qman-portal") + 1;
off = fdt_node_offset_by_compatible(blob, -1, "fsl,qman-portal");
@@ -267,14 +271,19 @@ void fdt_fixup_bportals(void *blob)
{
int off, err;
unsigned int maj, min;
+ unsigned int ip_cfg;
u32 rev_1 = in_be32(&bman->ip_rev_1);
+ u32 rev_2 = in_be32(&bman->ip_rev_2);
char compat[64];
int compat_len;
maj = (rev_1 >> 8) & 0xff;
min = rev_1 & 0xff;
- compat_len = sprintf(compat, "fsl,bman-portal-%u.%u", maj, min) + 1;
+ ip_cfg = rev_2 & 0xff;
+
+ compat_len = sprintf(compat, "fsl,bman-portal-%u.%u.%u",
+ maj, min, ip_cfg) + 1;
compat_len += sprintf(compat + compat_len, "fsl,bman-portal") + 1;
off = fdt_node_offset_by_compatible(blob, -1, "fsl,bman-portal");
diff --git a/arch/powerpc/cpu/mpc85xx/release.S b/arch/powerpc/cpu/mpc85xx/release.S
index 22e73e0..4ba44a9 100644
--- a/arch/powerpc/cpu/mpc85xx/release.S
+++ b/arch/powerpc/cpu/mpc85xx/release.S
@@ -150,29 +150,33 @@ __secondary_start_page:
#define toreset(x) (x - __secondary_start_page + 0xfffff000)
/* get our PIR to figure out our table entry */
- lis r3,toreset(__spin_table)@h
- ori r3,r3,toreset(__spin_table)@l
+ lis r3,toreset(__spin_table_addr)@h
+ ori r3,r3,toreset(__spin_table_addr)@l
+ lwz r3,0(r3)
- /* r10 has the base address for the entry */
+ /*
+ * r10 has the base address for the entry.
+ * we cannot access it yet before setting up a new TLB
+ */
mfspr r0,SPRN_PIR
#if defined(CONFIG_E6500)
/*
* PIR definition for E6500
* 0-17 Reserved (logic 0s)
- * 8-19 CHIP_ID, 2’b00 - SoC 1
+ * 8-19 CHIP_ID, 2'b00 - SoC 1
* all others - reserved
- * 20-24 CLUSTER_ID 5’b00000 - CCM 1
+ * 20-24 CLUSTER_ID 5'b00000 - CCM 1
* all others - reserved
- * 25-26 CORE_CLUSTER_ID 2’b00 - cluster 1
- * 2’b01 - cluster 2
- * 2’b10 - cluster 3
- * 2’b11 - cluster 4
- * 27-28 CORE_ID 2’b00 - core 0
- * 2’b01 - core 1
- * 2’b10 - core 2
- * 2’b11 - core 3
- * 29-31 THREAD_ID 3’b000 - thread 0
- * 3’b001 - thread 1
+ * 25-26 CORE_CLUSTER_ID 2'b00 - cluster 1
+ * 2'b01 - cluster 2
+ * 2'b10 - cluster 3
+ * 2'b11 - cluster 4
+ * 27-28 CORE_ID 2'b00 - core 0
+ * 2'b01 - core 1
+ * 2'b10 - core 2
+ * 2'b11 - core 3
+ * 29-31 THREAD_ID 3'b000 - thread 0
+ * 3'b001 - thread 1
*/
rlwinm r4,r0,29,25,31
#elif defined(CONFIG_E500MC)
@@ -180,16 +184,9 @@ __secondary_start_page:
#else
mr r4,r0
#endif
- slwi r8,r4,5
+ slwi r8,r4,6 /* spin table is padded to 64 byte */
add r10,r3,r8
-#if defined(CONFIG_E500MC) && defined(CONFIG_SYS_CACHE_STASHING)
- /* set stash id to (coreID) * 2 + 32 + L1 CT (0) */
- slwi r8,r4,1
- addi r8,r8,32
- mtspr L1CSR2,r8
-#endif
-
#ifdef CONFIG_E6500
mfspr r0,SPRN_PIR
/*
@@ -209,6 +206,13 @@ __secondary_start_page:
mtspr SPRN_PIR,r4 /* write to PIR register */
+#ifdef CONFIG_SYS_CACHE_STASHING
+ /* set stash id to (coreID) * 2 + 32 + L1 CT (0) */
+ slwi r8,r4,1
+ addi r8,r8,32
+ mtspr L1CSR2,r8
+#endif
+
#if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \
defined(CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011)
/*
@@ -277,73 +281,111 @@ __secondary_start_page:
beq 2b
#endif
3:
-
-#define EPAPR_MAGIC (0x45504150)
-#define ENTRY_ADDR_UPPER 0
-#define ENTRY_ADDR_LOWER 4
-#define ENTRY_R3_UPPER 8
-#define ENTRY_R3_LOWER 12
-#define ENTRY_RESV 16
-#define ENTRY_PIR 20
-#define ENTRY_R6_UPPER 24
-#define ENTRY_R6_LOWER 28
-#define ENTRY_SIZE 32
-
- /* setup the entry */
- li r3,0
- li r8,1
- stw r4,ENTRY_PIR(r10)
- stw r3,ENTRY_ADDR_UPPER(r10)
- stw r8,ENTRY_ADDR_LOWER(r10)
- stw r3,ENTRY_R3_UPPER(r10)
- stw r4,ENTRY_R3_LOWER(r10)
- stw r3,ENTRY_R6_UPPER(r10)
- stw r3,ENTRY_R6_LOWER(r10)
-
- /* load r13 with the address of the 'bootpg' in SDRAM */
- lis r13,toreset(__bootpg_addr)@h
- ori r13,r13,toreset(__bootpg_addr)@l
+ /* setup mapping for the spin table, WIMGE=0b00100 */
+ lis r13,toreset(__spin_table_addr)@h
+ ori r13,r13,toreset(__spin_table_addr)@l
lwz r13,0(r13)
+ /* mask by 4K */
+ rlwinm r13,r13,0,0,19
- /* setup mapping for AS = 1, and jump there */
lis r11,(MAS0_TLBSEL(1)|MAS0_ESEL(1))@h
mtspr SPRN_MAS0,r11
lis r11,(MAS1_VALID|MAS1_IPROT)@h
ori r11,r11,(MAS1_TS|MAS1_TSIZE(BOOKE_PAGESZ_4K))@l
mtspr SPRN_MAS1,r11
- oris r11,r13,(MAS2_I|MAS2_G)@h
- ori r11,r13,(MAS2_I|MAS2_G)@l
+ oris r11,r13,(MAS2_M|MAS2_G)@h
+ ori r11,r13,(MAS2_M|MAS2_G)@l
mtspr SPRN_MAS2,r11
oris r11,r13,(MAS3_SX|MAS3_SW|MAS3_SR)@h
ori r11,r13,(MAS3_SX|MAS3_SW|MAS3_SR)@l
mtspr SPRN_MAS3,r11
+ li r11,0
+ mtspr SPRN_MAS7,r11
tlbwe
- bl 1f
-1: mflr r11
/*
- * OR in 0xfff to create a mask of the bootpg SDRAM address. We use
- * this mask to fixup the cpu spin table and the address that we want
- * to jump to, eg change them from 0xfffffxxx to 0x7ffffxxx if the
- * bootpg is at 0x7ffff000 in SDRAM.
+ * __bootpg_addr has the address of __second_half_boot_page
+ * jump there in AS=1 space with cache enabled
*/
- ori r13,r13,0xfff
- and r11, r11, r13
- and r10, r10, r13
-
- addi r11,r11,(2f-1b)
+ lis r13,toreset(__bootpg_addr)@h
+ ori r13,r13,toreset(__bootpg_addr)@l
+ lwz r11,0(r13)
+ mtspr SPRN_SRR0,r11
mfmsr r13
ori r12,r13,MSR_IS|MSR_DS@l
-
- mtspr SPRN_SRR0,r11
mtspr SPRN_SRR1,r12
rfi
+ /*
+ * Allocate some space for the SDRAM address of the bootpg.
+ * This variable has to be in the boot page so that it can
+ * be accessed by secondary cores when they come out of reset.
+ */
+ .align L1_CACHE_SHIFT
+ .globl __bootpg_addr
+__bootpg_addr:
+ .long 0
+
+ .global __spin_table_addr
+__spin_table_addr:
+ .long 0
+
+ /*
+ * This variable is set by cpu_init_r() after parsing hwconfig
+ * to enable workaround for erratum NMG_CPU_A011.
+ */
+ .align L1_CACHE_SHIFT
+ .global enable_cpu_a011_workaround
+enable_cpu_a011_workaround:
+ .long 1
+
+ /* Fill in the empty space. The actual reset vector is
+ * the last word of the page */
+__secondary_start_code_end:
+ .space 4092 - (__secondary_start_code_end - __secondary_start_page)
+__secondary_reset_vector:
+ b __secondary_start_page
+
+
+/* this is a separated page for the spin table and cacheable boot code */
+ .align L1_CACHE_SHIFT
+ .global __second_half_boot_page
+__second_half_boot_page:
+#define EPAPR_MAGIC 0x45504150
+#define ENTRY_ADDR_UPPER 0
+#define ENTRY_ADDR_LOWER 4
+#define ENTRY_R3_UPPER 8
+#define ENTRY_R3_LOWER 12
+#define ENTRY_RESV 16
+#define ENTRY_PIR 20
+#define ENTRY_SIZE 64
+ /*
+ * setup the entry
+ * r10 has the base address of the spin table.
+ * spin table is defined as
+ * struct {
+ * uint64_t entry_addr;
+ * uint64_t r3;
+ * uint32_t rsvd1;
+ * uint32_t pir;
+ * };
+ * we pad this struct to 64 bytes so each entry is in its own cacheline
+ */
+ li r3,0
+ li r8,1
+ mfspr r4,SPRN_PIR
+ stw r3,ENTRY_ADDR_UPPER(r10)
+ stw r3,ENTRY_R3_UPPER(r10)
+ stw r4,ENTRY_R3_LOWER(r10)
+ stw r3,ENTRY_RESV(r10)
+ stw r4,ENTRY_PIR(r10)
+ msync
+ stw r8,ENTRY_ADDR_LOWER(r10)
+
/* spin waiting for addr */
-2:
- lwz r4,ENTRY_ADDR_LOWER(r10)
+3: lwz r4,ENTRY_ADDR_LOWER(r10)
andi. r11,r4,1
- bne 2b
+ bne 3b
isync
/* setup IVORs to match fixed offsets */
@@ -362,11 +404,20 @@ __secondary_start_page:
/* mask by ~64M to setup our tlb we will jump to */
rlwinm r12,r4,0,0,5
- /* setup r3, r4, r5, r6, r7, r8, r9 */
+ /*
+ * setup r3, r4, r5, r6, r7, r8, r9
+ * r3 contains the value to put in the r3 register at secondary cpu
+ * entry. The high 32-bits are ignored on 32-bit chip implementations.
+ * 64-bit chip implementations however shall load all 64-bits
+ */
+#ifdef CONFIG_SYS_PPC64
+ ld r3,ENTRY_R3_UPPER(r10)
+#else
lwz r3,ENTRY_R3_LOWER(r10)
+#endif
li r4,0
li r5,0
- lwz r6,ENTRY_R6_LOWER(r10)
+ li r6,0
lis r7,(64*1024*1024)@h
li r8,0
li r9,0
@@ -404,32 +455,10 @@ __secondary_start_page:
mtspr SPRN_SRR1,r13
rfi
- /*
- * Allocate some space for the SDRAM address of the bootpg.
- * This variable has to be in the boot page so that it can
- * be accessed by secondary cores when they come out of reset.
- */
- .globl __bootpg_addr
-__bootpg_addr:
- .long 0
- .align L1_CACHE_SHIFT
+ .align 6
.globl __spin_table
__spin_table:
.space CONFIG_MAX_CPUS*ENTRY_SIZE
-
- /*
- * This variable is set by cpu_init_r() after parsing hwconfig
- * to enable workaround for erratum NMG_CPU_A011.
- */
- .align L1_CACHE_SHIFT
- .global enable_cpu_a011_workaround
-enable_cpu_a011_workaround:
- .long 1
-
- /* Fill in the empty space. The actual reset vector is
- * the last word of the page */
-__secondary_start_code_end:
- .space 4092 - (__secondary_start_code_end - __secondary_start_page)
-__secondary_reset_vector:
- b __secondary_start_page
+__spin_table_end:
+ .space 4096 - (__spin_table_end - __spin_table)
diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index abfeb26..801ee07 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -39,6 +39,10 @@ DECLARE_GLOBAL_DATA_PTR;
void get_sys_info (sys_info_t * sysInfo)
{
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+#ifdef CONFIG_FSL_IFC
+ struct fsl_ifc *ifc_regs = (void *)CONFIG_SYS_IFC_ADDR;
+ u32 ccr;
+#endif
#ifdef CONFIG_FSL_CORENET
volatile ccsr_clk_t *clk = (void *)(CONFIG_SYS_FSL_CORENET_CLK_ADDR);
unsigned int cpu;
@@ -72,16 +76,22 @@ void get_sys_info (sys_info_t * sysInfo)
[13] = 2, /* CC4 PPL / 2 */
[14] = 4, /* CC4 PPL / 4 */
};
- uint lcrr_div, i, freqCC_PLL[4], rcw_tmp;
- uint ratio[4];
+ uint i, freqCC_PLL[6], rcw_tmp;
+ uint ratio[6];
unsigned long sysclk = CONFIG_SYS_CLK_FREQ;
uint mem_pll_rat;
sysInfo->freqSystemBus = sysclk;
+#ifdef CONFIG_DDR_CLK_FREQ
+ sysInfo->freqDDRBus = CONFIG_DDR_CLK_FREQ;
+#else
sysInfo->freqDDRBus = sysclk;
+#endif
sysInfo->freqSystemBus *= (in_be32(&gur->rcwsr[0]) >> 25) & 0x1f;
- mem_pll_rat = (in_be32(&gur->rcwsr[0]) >> 17) & 0x1f;
+ mem_pll_rat = (in_be32(&gur->rcwsr[0]) >>
+ FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT)
+ & FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK;
if (mem_pll_rat > 2)
sysInfo->freqDDRBus *= mem_pll_rat;
else
@@ -91,27 +101,151 @@ void get_sys_info (sys_info_t * sysInfo)
ratio[1] = (in_be32(&clk->pllc2gsr) >> 1) & 0x3f;
ratio[2] = (in_be32(&clk->pllc3gsr) >> 1) & 0x3f;
ratio[3] = (in_be32(&clk->pllc4gsr) >> 1) & 0x3f;
- for (i = 0; i < 4; i++) {
+ ratio[4] = (in_be32(&clk->pllc5gsr) >> 1) & 0x3f;
+ ratio[5] = (in_be32(&clk->pllc6gsr) >> 1) & 0x3f;
+ for (i = 0; i < 6; i++) {
if (ratio[i] > 4)
freqCC_PLL[i] = sysclk * ratio[i];
else
freqCC_PLL[i] = sysInfo->freqSystemBus * ratio[i];
}
- rcw_tmp = in_be32(&gur->rcwsr[3]);
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+ /*
+ * Each cluster has up to 4 cores, sharing the same PLL selection.
+ * The cluster assignment is fixed per SoC. There is no way identify the
+ * assignment so far, presuming the "first configuration" which is to
+ * fill the lower cluster group first before moving up to next group.
+ * PLL1, PLL2, PLL3 are cluster group A, feeding core 0~3 on cluster 1
+ * and core 4~7 on cluster 2
+ * PLL4, PLL5, PLL6 are cluster group B, feeding core 8~11 on cluster 3
+ * and core 12~15 on cluster 4 if existing
+ */
for_each_cpu(i, cpu, cpu_numcores(), cpu_mask()) {
- u32 c_pll_sel = (in_be32(&clk->clkc0csr + cpu*8) >> 27) & 0xf;
+ u32 c_pll_sel = (in_be32(&clk->clkc0csr + (cpu / 4) * 8) >> 27)
+ & 0xf;
u32 cplx_pll = core_cplx_PLL[c_pll_sel];
+ if (cplx_pll > 3)
+ printf("Unsupported architecture configuration"
+ " in function %s\n", __func__);
+ cplx_pll += (cpu / 8) * 3;
sysInfo->freqProcessor[cpu] =
freqCC_PLL[cplx_pll] / core_cplx_PLL_div[c_pll_sel];
}
+#define PME_CLK_SEL 0xe0000000
+#define PME_CLK_SHIFT 29
+#define FM1_CLK_SEL 0x1c000000
+#define FM1_CLK_SHIFT 26
+ rcw_tmp = in_be32(&gur->rcwsr[7]);
+
+#ifdef CONFIG_SYS_DPAA_PME
+ switch ((rcw_tmp & PME_CLK_SEL) >> PME_CLK_SHIFT) {
+ case 1:
+ sysInfo->freqPME = freqCC_PLL[0];
+ break;
+ case 2:
+ sysInfo->freqPME = freqCC_PLL[0] / 2;
+ break;
+ case 3:
+ sysInfo->freqPME = freqCC_PLL[0] / 3;
+ break;
+ case 4:
+ sysInfo->freqPME = freqCC_PLL[0] / 4;
+ break;
+ case 6:
+ sysInfo->freqPME = freqCC_PLL[1] / 2;
+ break;
+ case 7:
+ sysInfo->freqPME = freqCC_PLL[1] / 3;
+ break;
+ default:
+ printf("Error: Unknown PME clock select!\n");
+ case 0:
+ sysInfo->freqPME = sysInfo->freqSystemBus / 2;
+ break;
+ }
+#endif
+
+#ifdef CONFIG_SYS_DPAA_QBMAN
+ sysInfo->freqQMAN = sysInfo->freqSystemBus / 2;
+#endif
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+ switch ((rcw_tmp & FM1_CLK_SEL) >> FM1_CLK_SHIFT) {
+ case 1:
+ sysInfo->freqFMan[0] = freqCC_PLL[3];
+ break;
+ case 2:
+ sysInfo->freqFMan[0] = freqCC_PLL[3] / 2;
+ break;
+ case 3:
+ sysInfo->freqFMan[0] = freqCC_PLL[3] / 3;
+ break;
+ case 4:
+ sysInfo->freqFMan[0] = freqCC_PLL[3] / 4;
+ break;
+ case 6:
+ sysInfo->freqFMan[0] = freqCC_PLL[4] / 2;
+ break;
+ case 7:
+ sysInfo->freqFMan[0] = freqCC_PLL[4] / 3;
+ break;
+ default:
+ printf("Error: Unknown FMan1 clock select!\n");
+ case 0:
+ sysInfo->freqFMan[0] = sysInfo->freqSystemBus / 2;
+ break;
+ }
+#if (CONFIG_SYS_NUM_FMAN) == 2
+#define FM2_CLK_SEL 0x00000038
+#define FM2_CLK_SHIFT 3
+ rcw_tmp = in_be32(&gur->rcwsr[15]);
+ switch ((rcw_tmp & FM2_CLK_SEL) >> FM2_CLK_SHIFT) {
+ case 1:
+ sysInfo->freqFMan[1] = freqCC_PLL[4];
+ break;
+ case 2:
+ sysInfo->freqFMan[1] = freqCC_PLL[4] / 2;
+ break;
+ case 3:
+ sysInfo->freqFMan[1] = freqCC_PLL[4] / 3;
+ break;
+ case 4:
+ sysInfo->freqFMan[1] = freqCC_PLL[4] / 4;
+ break;
+ case 6:
+ sysInfo->freqFMan[1] = freqCC_PLL[3] / 2;
+ break;
+ case 7:
+ sysInfo->freqFMan[1] = freqCC_PLL[3] / 3;
+ break;
+ default:
+ printf("Error: Unknown FMan2 clock select!\n");
+ case 0:
+ sysInfo->freqFMan[1] = sysInfo->freqSystemBus / 2;
+ break;
+ }
+#endif /* CONFIG_SYS_NUM_FMAN == 2 */
+#endif /* CONFIG_SYS_DPAA_FMAN */
+
+#else /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
+
+ for_each_cpu(i, cpu, cpu_numcores(), cpu_mask()) {
+ u32 c_pll_sel = (in_be32(&clk->clkc0csr + cpu*8) >> 27) & 0xf;
+ u32 cplx_pll = core_cplx_PLL[c_pll_sel];
+
+ sysInfo->freqProcessor[cpu] =
+ freqCC_PLL[cplx_pll] / core_cplx_PLL_div[c_pll_sel];
+ }
#define PME_CLK_SEL 0x80000000
#define FM1_CLK_SEL 0x40000000
#define FM2_CLK_SEL 0x20000000
#define HWA_ASYNC_DIV 0x04000000
#if (CONFIG_SYS_FSL_NUM_CC_PLLS == 2)
#define HWA_CC_PLL 1
+#elif (CONFIG_SYS_FSL_NUM_CC_PLLS == 3)
+#define HWA_CC_PLL 2
#elif (CONFIG_SYS_FSL_NUM_CC_PLLS == 4)
#define HWA_CC_PLL 2
#else
@@ -151,11 +285,10 @@ void get_sys_info (sys_info_t * sysInfo)
#endif
#endif
-#else
- uint plat_ratio,e500_ratio,half_freqSystemBus;
-#if defined(CONFIG_FSL_LBC)
- uint lcrr_div;
-#endif
+#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
+
+#else /* CONFIG_FSL_CORENET */
+ uint plat_ratio, e500_ratio, half_freqSystemBus;
int i;
#ifdef CONFIG_QE
__maybe_unused u32 qe_ratio;
@@ -202,6 +335,7 @@ void get_sys_info (sys_info_t * sysInfo)
#endif /* CONFIG_FSL_CORENET */
#if defined(CONFIG_FSL_LBC)
+ uint lcrr_div;
#if defined(CONFIG_SYS_LBC_LCRR)
/* We will program LCRR to this value later */
lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV;
@@ -228,6 +362,13 @@ void get_sys_info (sys_info_t * sysInfo)
sysInfo->freqLocalBus = lcrr_div;
}
#endif
+
+#if defined(CONFIG_FSL_IFC)
+ ccr = in_be32(&ifc_regs->ifc_ccr);
+ ccr = ((ccr & IFC_CCR_CLK_DIV_MASK) >> IFC_CCR_CLK_DIV_SHIFT) + 1;
+
+ sysInfo->freqLocalBus = sysInfo->freqSystemBus / ccr;
+#endif
}
diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S
index 9e04257..ac17f9d 100644
--- a/arch/powerpc/cpu/mpc85xx/start.S
+++ b/arch/powerpc/cpu/mpc85xx/start.S
@@ -169,7 +169,7 @@ l2_disabled:
*
*/
-#if defined(CONFIG_E500MC) && defined(CONFIG_SYS_CACHE_STASHING)
+#ifdef CONFIG_SYS_CACHE_STASHING
/* set stash id to (coreID) * 2 + 32 + L1 CT (0) */
li r2,(32 + 0)
mtspr L1CSR2,r2
@@ -211,6 +211,77 @@ l2_disabled:
andi. r1,r3,L1CSR0_DCE@l
beq 2b
+ .macro create_tlb1_entry esel ts tsize epn wimg rpn perm phy_high scratch
+ lis \scratch, FSL_BOOKE_MAS0(1, \esel, 0)@h
+ ori \scratch, \scratch, FSL_BOOKE_MAS0(1, \esel, 0)@l
+ mtspr MAS0, \scratch
+ lis \scratch, FSL_BOOKE_MAS1(1, 1, 0, \ts, \tsize)@h
+ ori \scratch, \scratch, FSL_BOOKE_MAS1(1, 1, 0, \ts, \tsize)@l
+ mtspr MAS1, \scratch
+ lis \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@h
+ ori \scratch, \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@l
+ mtspr MAS2, \scratch
+ lis \scratch, FSL_BOOKE_MAS3(\rpn, 0, \perm)@h
+ ori \scratch, \scratch, FSL_BOOKE_MAS3(\rpn, 0, \perm)@l
+ mtspr MAS3, \scratch
+ lis \scratch, \phy_high@h
+ ori \scratch, \scratch, \phy_high@l
+ mtspr MAS7, \scratch
+ isync
+ msync
+ tlbwe
+ isync
+ .endm
+
+ .macro create_tlb0_entry esel ts tsize epn wimg rpn perm phy_high scratch
+ lis \scratch, FSL_BOOKE_MAS0(0, \esel, 0)@h
+ ori \scratch, \scratch, FSL_BOOKE_MAS0(0, \esel, 0)@l
+ mtspr MAS0, \scratch
+ lis \scratch, FSL_BOOKE_MAS1(1, 0, 0, \ts, \tsize)@h
+ ori \scratch, \scratch, FSL_BOOKE_MAS1(1, 0, 0, \ts, \tsize)@l
+ mtspr MAS1, \scratch
+ lis \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@h
+ ori \scratch, \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@l
+ mtspr MAS2, \scratch
+ lis \scratch, FSL_BOOKE_MAS3(\rpn, 0, \perm)@h
+ ori \scratch, \scratch, FSL_BOOKE_MAS3(\rpn, 0, \perm)@l
+ mtspr MAS3, \scratch
+ lis \scratch, \phy_high@h
+ ori \scratch, \scratch, \phy_high@l
+ mtspr MAS7, \scratch
+ isync
+ msync
+ tlbwe
+ isync
+ .endm
+
+ .macro delete_tlb1_entry esel scratch
+ lis \scratch, FSL_BOOKE_MAS0(1, \esel, 0)@h
+ ori \scratch, \scratch, FSL_BOOKE_MAS0(1, \esel, 0)@l
+ mtspr MAS0, \scratch
+ li \scratch, 0
+ mtspr MAS1, \scratch
+ isync
+ msync
+ tlbwe
+ isync
+ .endm
+
+ .macro delete_tlb0_entry esel epn wimg scratch
+ lis \scratch, FSL_BOOKE_MAS0(0, \esel, 0)@h
+ ori \scratch, \scratch, FSL_BOOKE_MAS0(0, \esel, 0)@l
+ mtspr MAS0, \scratch
+ li \scratch, 0
+ mtspr MAS1, \scratch
+ lis \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@h
+ ori \scratch, \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@l
+ mtspr MAS2, \scratch
+ isync
+ msync
+ tlbwe
+ isync
+ .endm
+
#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && !defined(CONFIG_NAND_SPL)
/*
* TLB entry for debuggging in AS1
@@ -220,61 +291,35 @@ l2_disabled:
* in AS1.
*/
- lis r6,FSL_BOOKE_MAS0(1,
- CONFIG_SYS_PPC_E500_DEBUG_TLB, 0)@h
- ori r6,r6,FSL_BOOKE_MAS0(1,
- CONFIG_SYS_PPC_E500_DEBUG_TLB, 0)@l
-
#if !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SECURE_BOOT)
/*
* TLB entry is created for IVPR + IVOR15 to map on valid OP code address
* bacause flash's virtual address maps to 0xff800000 - 0xffffffff.
* and this window is outside of 4K boot window.
*/
- lis r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_4M)@h
- ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_4M)@l
-
- lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE & 0xffc00000,
- (MAS2_I|MAS2_G))@h
- ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE & 0xffc00000,
- (MAS2_I|MAS2_G))@l
+ create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \
+ 0, BOOKE_PAGESZ_4M, \
+ CONFIG_SYS_MONITOR_BASE & 0xffc00000, MAS2_I|MAS2_G, \
+ 0xffc00000, MAS3_SX|MAS3_SW|MAS3_SR, \
+ 0, r6
- /* The 85xx has the default boot window 0xff800000 - 0xffffffff */
- lis r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
- ori r9,r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
#elif !defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT)
- lis r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1M)@h
- ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1M)@l
-
- lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE,(MAS2_I|MAS2_G))@h
- ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE,(MAS2_I|MAS2_G))@l
-
- lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_PBI_FLASH_WINDOW, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))@h
- ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_PBI_FLASH_WINDOW, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))@l
+ create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \
+ 0, BOOKE_PAGESZ_1M, \
+ CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \
+ CONFIG_SYS_PBI_FLASH_WINDOW, MAS3_SX|MAS3_SW|MAS3_SR, \
+ 0, r6
#else
/*
* TLB entry is created for IVPR + IVOR15 to map on valid OP code address
* because "nexti" will resize TLB to 4K
*/
- lis r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256K)@h
- ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256K)@l
-
- lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I))@h
- ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE,
- (MAS2_I))@l
- lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_MONITOR_BASE, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))@h
- ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_MONITOR_BASE, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))@l
+ create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \
+ 0, BOOKE_PAGESZ_256K, \
+ CONFIG_SYS_MONITOR_BASE, MAS2_I, \
+ CONFIG_SYS_MONITOR_BASE, MAS3_SX|MAS3_SW|MAS3_SR, \
+ 0, r6
#endif
- mtspr MAS0,r6
- mtspr MAS1,r7
- mtspr MAS2,r8
- mtspr MAS3,r9
- tlbwe
- isync
#endif
/*
@@ -392,27 +437,11 @@ l2_disabled:
*/
/* create a temp mapping TLB0[0] for LBCR */
- lis r6,FSL_BOOKE_MAS0(0, 0, 0)@h
- ori r6,r6,FSL_BOOKE_MAS0(0, 0, 0)@l
-
- lis r7,FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@h
- ori r7,r7,FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@l
-
- lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_LBC_ADDR, MAS2_I|MAS2_G)@h
- ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_LBC_ADDR, MAS2_I|MAS2_G)@l
-
- lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_LBC_ADDR, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))@h
- ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_LBC_ADDR, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))@l
-
- mtspr MAS0,r6
- mtspr MAS1,r7
- mtspr MAS2,r8
- mtspr MAS3,r9
- isync
- msync
- tlbwe
+ create_tlb0_entry 0, \
+ 0, BOOKE_PAGESZ_4K, \
+ CONFIG_SYS_LBC_ADDR, MAS2_I|MAS2_G, \
+ CONFIG_SYS_LBC_ADDR, MAS3_SW|MAS3_SR, \
+ 0, r6
/* Set LBCR register */
lis r4,CONFIG_SYS_LBCR_ADDR@h
@@ -551,49 +580,22 @@ create_ccsr_new_tlb:
ori r8, r8, CONFIG_SYS_CCSRBAR@l
lis r9, (CONFIG_SYS_CCSRBAR + 0x1000)@h
ori r9, r9, (CONFIG_SYS_CCSRBAR + 0x1000)@l
- lis r0, FSL_BOOKE_MAS0(0, 0, 0)@h
- ori r0, r0, FSL_BOOKE_MAS0(0, 0, 0)@l
- lis r1, FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@h
- ori r1, r1, FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@l
- lis r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@h
- ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@l
- lis r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_PHYS_LOW, 0, (MAS3_SW|MAS3_SR))@h
- ori r3, r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_PHYS_LOW, 0, (MAS3_SW|MAS3_SR))@l
-#ifdef CONFIG_ENABLE_36BIT_PHYS
- lis r7, CONFIG_SYS_CCSRBAR_PHYS_HIGH@h
- ori r7, r7, CONFIG_SYS_CCSRBAR_PHYS_HIGH@l
- mtspr MAS7, r7
-#endif
- mtspr MAS0, r0
- mtspr MAS1, r1
- mtspr MAS2, r2
- mtspr MAS3, r3
- isync
- msync
- tlbwe
-
+ create_tlb0_entry 0, \
+ 0, BOOKE_PAGESZ_4K, \
+ CONFIG_SYS_CCSRBAR, MAS2_I|MAS2_G, \
+ CONFIG_SYS_CCSRBAR_PHYS_LOW, MAS3_SW|MAS3_SR, \
+ CONFIG_SYS_CCSRBAR_PHYS_HIGH, r3
/*
* Create a TLB for the current location of CCSR. Register R9 is reserved
* for the virtual address of this TLB (CONFIG_SYS_CCSRBAR + 0x1000).
*/
create_ccsr_old_tlb:
- lis r0, FSL_BOOKE_MAS0(0, 1, 0)@h
- ori r0, r0, FSL_BOOKE_MAS0(0, 1, 0)@l
- lis r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@h
- ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@l
- lis r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_DEFAULT, 0, (MAS3_SW|MAS3_SR))@h
- ori r3, r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_DEFAULT, 0, (MAS3_SW|MAS3_SR))@l
-#ifdef CONFIG_ENABLE_36BIT_PHYS
- li r7, 0 /* The default CCSR address is always a 32-bit number */
- mtspr MAS7, r7
-#endif
- mtspr MAS0, r0
- /* MAS1 is the same as above */
- mtspr MAS2, r2
- mtspr MAS3, r3
- isync
- msync
- tlbwe
+ create_tlb0_entry 1, \
+ 0, BOOKE_PAGESZ_4K, \
+ CONFIG_SYS_CCSRBAR + 0x1000, MAS2_I|MAS2_G, \
+ CONFIG_SYS_CCSRBAR_DEFAULT, MAS3_SW|MAS3_SR, \
+ 0, r3 /* The default CCSR address is always a 32-bit number */
+
/*
* We have a TLB for what we think is the current (old) CCSR. Let's
@@ -743,29 +745,46 @@ write_new_ccsrbar:
/* Delete the temporary TLBs */
delete_temp_tlbs:
- lis r0, FSL_BOOKE_MAS0(0, 0, 0)@h
- ori r0, r0, FSL_BOOKE_MAS0(0, 0, 0)@l
- li r1, 0
- lis r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@h
- ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@l
- mtspr MAS0, r0
- mtspr MAS1, r1
- mtspr MAS2, r2
- isync
- msync
- tlbwe
+ delete_tlb0_entry 0, CONFIG_SYS_CCSRBAR, MAS2_I|MAS2_G, r3
+ delete_tlb0_entry 1, CONFIG_SYS_CCSRBAR + 0x1000, MAS2_I|MAS2_G, r3
- lis r0, FSL_BOOKE_MAS0(0, 1, 0)@h
- ori r0, r0, FSL_BOOKE_MAS0(0, 1, 0)@l
- lis r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@h
- ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@l
- mtspr MAS0, r0
- mtspr MAS2, r2
- isync
- msync
- tlbwe
#endif /* #if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR_PHYS) */
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+create_ccsr_l2_tlb:
+ /*
+ * Create a TLB for the MMR location of CCSR
+ * to access L2CSR0 register
+ */
+ create_tlb0_entry 0, \
+ 0, BOOKE_PAGESZ_4K, \
+ CONFIG_SYS_CCSRBAR + 0xC20000, MAS2_I|MAS2_G, \
+ CONFIG_SYS_CCSRBAR_PHYS_LOW + 0xC20000, MAS3_SW|MAS3_SR, \
+ CONFIG_SYS_CCSRBAR_PHYS_HIGH, r3
+
+enable_l2_cluster_l2:
+ /* enable L2 cache */
+ lis r3, (CONFIG_SYS_CCSRBAR + 0xC20000)@h
+ ori r3, r3, (CONFIG_SYS_CCSRBAR + 0xC20000)@l
+ li r4, 33 /* stash id */
+ stw r4, 4(r3)
+ lis r4, (L2CSR0_L2FI|L2CSR0_L2LFC)@h
+ ori r4, r4, (L2CSR0_L2FI|L2CSR0_L2LFC)@l
+ sync
+ stw r4, 0(r3) /* invalidate L2 */
+1: sync
+ lwz r0, 0(r3)
+ twi 0, r0, 0
+ isync
+ and. r1, r0, r4
+ bne 1b
+ lis r4, L2CSR0_L2E@h
+ sync
+ stw r4, 0(r3) /* eanble L2 */
+delete_ccsr_l2_tlb:
+ delete_tlb0_entry 0, CONFIG_SYS_CCSRBAR + 0xC20000, MAS2_I|MAS2_G, r3
+#endif
+
#ifdef CONFIG_SYS_FSL_ERRATUM_A004510
#define DCSR_LAWBARH0 (CONFIG_SYS_CCSRBAR + 0x1000)
#define LAW_SIZE_1M 0x13
@@ -1019,83 +1038,50 @@ create_init_ram_area:
#if !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SECURE_BOOT)
/* create a temp mapping in AS=1 to the 4M boot window */
- lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@h
- ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@l
+ create_tlb1_entry 15, \
+ 1, BOOKE_PAGESZ_4M, \
+ CONFIG_SYS_MONITOR_BASE & 0xffc00000, MAS2_I|MAS2_G, \
+ 0xffc00000, MAS3_SX|MAS3_SW|MAS3_SR, \
+ 0, r6
- lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE & 0xffc00000, (MAS2_I|MAS2_G))@h
- ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE & 0xffc00000, (MAS2_I|MAS2_G))@l
-
- /* The 85xx has the default boot window 0xff800000 - 0xffffffff */
- lis r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
- ori r9,r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
#elif !defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT)
/* create a temp mapping in AS = 1 for Flash mapping
* created by PBL for ISBC code
*/
- lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@h
- ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@l
-
- lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I|MAS2_G))@h
- ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I|MAS2_G))@l
-
- lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_PBI_FLASH_WINDOW, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))@h
- ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_PBI_FLASH_WINDOW, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))@l
+ create_tlb1_entry 15, \
+ 1, BOOKE_PAGESZ_1M, \
+ CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \
+ CONFIG_SYS_PBI_FLASH_WINDOW, MAS3_SX|MAS3_SW|MAS3_SR, \
+ 0, r6
#else
/*
* create a temp mapping in AS=1 to the 1M CONFIG_SYS_MONITOR_BASE space, the main
* image has been relocated to CONFIG_SYS_MONITOR_BASE on the second stage.
*/
- lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@h
- ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@l
-
- lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I|MAS2_G))@h
- ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I|MAS2_G))@l
-
- lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_MONITOR_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
- ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_MONITOR_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
+ create_tlb1_entry 15, \
+ 1, BOOKE_PAGESZ_1M, \
+ CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \
+ CONFIG_SYS_MONITOR_BASE, MAS3_SX|MAS3_SW|MAS3_SR, \
+ 0, r6
#endif
- mtspr MAS0,r6
- mtspr MAS1,r7
- mtspr MAS2,r8
- mtspr MAS3,r9
- isync
- msync
- tlbwe
-
/* create a temp mapping in AS=1 to the stack */
- lis r6,FSL_BOOKE_MAS0(1, 14, 0)@h
- ori r6,r6,FSL_BOOKE_MAS0(1, 14, 0)@l
-
- lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16K)@h
- ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16K)@l
-
- lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_INIT_RAM_ADDR, 0)@h
- ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_INIT_RAM_ADDR, 0)@l
-
#if defined(CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) && \
defined(CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH)
- lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))@h
- ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))@l
- li r10,CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH
- mtspr MAS7,r10
+ create_tlb1_entry 14, \
+ 1, BOOKE_PAGESZ_16K, \
+ CONFIG_SYS_INIT_RAM_ADDR, 0, \
+ CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW, MAS3_SX|MAS3_SW|MAS3_SR, \
+ CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH, r6
+
#else
- lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
- ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
+ create_tlb1_entry 14, \
+ 1, BOOKE_PAGESZ_16K, \
+ CONFIG_SYS_INIT_RAM_ADDR, 0, \
+ CONFIG_SYS_INIT_RAM_ADDR, MAS3_SX|MAS3_SW|MAS3_SR, \
+ 0, r6
#endif
- mtspr MAS0,r6
- mtspr MAS1,r7
- mtspr MAS2,r8
- mtspr MAS3,r9
- isync
- msync
- tlbwe
-
lis r6,MSR_IS|MSR_DS|MSR_DE@h
ori r6,r6,MSR_IS|MSR_DS|MSR_DE@l
lis r7,switch_as@h
diff --git a/arch/powerpc/cpu/mpc85xx/t4240_ids.c b/arch/powerpc/cpu/mpc85xx/t4240_ids.c
new file mode 100644
index 0000000..a8f16b1
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/t4240_ids.c
@@ -0,0 +1,203 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+
+#ifdef CONFIG_SYS_DPAA_QBMAN
+struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = {
+ /* dqrr liodn, frame data liodn, liodn off, sdest */
+ SET_QP_INFO(1, 27, 1, 0),
+ SET_QP_INFO(2, 28, 1, 0),
+ SET_QP_INFO(3, 29, 1, 1),
+ SET_QP_INFO(4, 30, 1, 1),
+ SET_QP_INFO(5, 31, 1, 2),
+ SET_QP_INFO(6, 32, 1, 2),
+ SET_QP_INFO(7, 33, 1, 3),
+ SET_QP_INFO(8, 34, 1, 3),
+ SET_QP_INFO(9, 35, 1, 4),
+ SET_QP_INFO(10, 36, 1, 4),
+ SET_QP_INFO(11, 37, 1, 5),
+ SET_QP_INFO(12, 38, 1, 5),
+ SET_QP_INFO(13, 39, 1, 6),
+ SET_QP_INFO(14, 40, 1, 6),
+ SET_QP_INFO(15, 41, 1, 7),
+ SET_QP_INFO(16, 42, 1, 7),
+ SET_QP_INFO(17, 43, 1, 8),
+ SET_QP_INFO(18, 44, 1, 8),
+ SET_QP_INFO(19, 45, 1, 9),
+ SET_QP_INFO(20, 46, 1, 9),
+ SET_QP_INFO(21, 47, 1, 10),
+ SET_QP_INFO(22, 48, 1, 10),
+ SET_QP_INFO(23, 49, 1, 11),
+ SET_QP_INFO(24, 50, 1, 11),
+ SET_QP_INFO(65, 89, 1, 0),
+ SET_QP_INFO(66, 90, 1, 0),
+ SET_QP_INFO(67, 91, 1, 1),
+ SET_QP_INFO(68, 92, 1, 1),
+ SET_QP_INFO(69, 93, 1, 2),
+ SET_QP_INFO(70, 94, 1, 2),
+ SET_QP_INFO(71, 95, 1, 3),
+ SET_QP_INFO(72, 96, 1, 3),
+ SET_QP_INFO(73, 97, 1, 4),
+ SET_QP_INFO(74, 98, 1, 4),
+ SET_QP_INFO(75, 99, 1, 5),
+ SET_QP_INFO(76, 100, 1, 5),
+ SET_QP_INFO(77, 101, 1, 6),
+ SET_QP_INFO(78, 102, 1, 6),
+ SET_QP_INFO(79, 103, 1, 7),
+ SET_QP_INFO(80, 104, 1, 7),
+ SET_QP_INFO(81, 105, 1, 8),
+ SET_QP_INFO(82, 106, 1, 8),
+ SET_QP_INFO(83, 107, 1, 9),
+ SET_QP_INFO(84, 108, 1, 9),
+ SET_QP_INFO(85, 109, 1, 10),
+ SET_QP_INFO(86, 110, 1, 10),
+ SET_QP_INFO(87, 111, 1, 11),
+ SET_QP_INFO(88, 112, 1, 11),
+ SET_QP_INFO(25, 51, 1, 0),
+ SET_QP_INFO(26, 52, 1, 0),
+};
+#endif
+
+struct srio_liodn_id_table srio_liodn_tbl[] = {
+ SET_SRIO_LIODN_1(1, 307),
+ SET_SRIO_LIODN_1(2, 387),
+};
+int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl);
+
+struct liodn_id_table liodn_tbl[] = {
+#ifdef CONFIG_SYS_DPAA_QBMAN
+ SET_QMAN_LIODN(62),
+ SET_BMAN_LIODN(63),
+#endif
+
+ SET_SDHC_LIODN(1, 552),
+
+ SET_PME_LIODN(117),
+
+ SET_USB_LIODN(1, "fsl-usb2-mph", 553),
+ SET_USB_LIODN(2, "fsl-usb2-dr", 554),
+
+ SET_SATA_LIODN(1, 555),
+ SET_SATA_LIODN(2, 556),
+
+ SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 148),
+ SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 2, 228),
+ SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 3, 308),
+ SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 4, 388),
+
+ SET_DMA_LIODN(1, 147),
+ SET_DMA_LIODN(2, 227),
+
+ SET_GUTS_LIODN("fsl,rapidio-delta", 199, rio1liodnr, 0),
+ SET_GUTS_LIODN(NULL, 200, rio2liodnr, 0),
+ SET_GUTS_LIODN(NULL, 201, rio1maintliodnr, 0),
+ SET_GUTS_LIODN(NULL, 202, rio2maintliodnr, 0),
+
+#ifdef CONFIG_SYS_PMAN
+ SET_PMAN_LIODN(1, 513),
+ SET_PMAN_LIODN(2, 514),
+ SET_PMAN_LIODN(3, 515),
+#endif
+
+ /* SET_NEXUS_LIODN(557), -- not yet implemented */
+};
+int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl);
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+struct liodn_id_table fman1_liodn_tbl[] = {
+ SET_FMAN_RX_1G_LIODN(1, 0, 88),
+ SET_FMAN_RX_1G_LIODN(1, 1, 89),
+ SET_FMAN_RX_1G_LIODN(1, 2, 90),
+ SET_FMAN_RX_1G_LIODN(1, 3, 91),
+ SET_FMAN_RX_1G_LIODN(1, 4, 92),
+ SET_FMAN_RX_1G_LIODN(1, 5, 93),
+ SET_FMAN_RX_10G_LIODN(1, 0, 94),
+ SET_FMAN_RX_10G_LIODN(1, 1, 95),
+};
+int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl);
+#if (CONFIG_SYS_NUM_FMAN == 2)
+struct liodn_id_table fman2_liodn_tbl[] = {
+ SET_FMAN_RX_1G_LIODN(2, 0, 88),
+ SET_FMAN_RX_1G_LIODN(2, 1, 89),
+ SET_FMAN_RX_1G_LIODN(2, 2, 90),
+ SET_FMAN_RX_1G_LIODN(2, 3, 91),
+ SET_FMAN_RX_1G_LIODN(2, 4, 92),
+ SET_FMAN_RX_1G_LIODN(2, 5, 93),
+ SET_FMAN_RX_10G_LIODN(2, 0, 94),
+ SET_FMAN_RX_10G_LIODN(2, 1, 95),
+};
+int fman2_liodn_tbl_sz = ARRAY_SIZE(fman2_liodn_tbl);
+#endif
+#endif
+
+struct liodn_id_table sec_liodn_tbl[] = {
+ SET_SEC_JR_LIODN_ENTRY(0, 454, 458),
+ SET_SEC_JR_LIODN_ENTRY(1, 455, 459),
+ SET_SEC_JR_LIODN_ENTRY(2, 456, 460),
+ SET_SEC_JR_LIODN_ENTRY(3, 457, 461),
+ SET_SEC_RTIC_LIODN_ENTRY(a, 453),
+ SET_SEC_RTIC_LIODN_ENTRY(b, 549),
+ SET_SEC_RTIC_LIODN_ENTRY(c, 550),
+ SET_SEC_RTIC_LIODN_ENTRY(d, 551),
+ SET_SEC_DECO_LIODN_ENTRY(0, 541, 610),
+ SET_SEC_DECO_LIODN_ENTRY(1, 542, 611),
+ SET_SEC_DECO_LIODN_ENTRY(2, 543, 612),
+ SET_SEC_DECO_LIODN_ENTRY(3, 544, 613),
+ SET_SEC_DECO_LIODN_ENTRY(4, 545, 614),
+ SET_SEC_DECO_LIODN_ENTRY(5, 546, 615),
+ SET_SEC_DECO_LIODN_ENTRY(6, 547, 616),
+ SET_SEC_DECO_LIODN_ENTRY(7, 548, 617),
+};
+int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl);
+
+#ifdef CONFIG_SYS_DPAA_RMAN
+struct liodn_id_table rman_liodn_tbl[] = {
+ /* Set RMan block 0-3 liodn offset */
+ SET_RMAN_LIODN(0, 678),
+ SET_RMAN_LIODN(1, 679),
+ SET_RMAN_LIODN(2, 680),
+ SET_RMAN_LIODN(3, 681),
+};
+int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl);
+#endif
+
+struct liodn_id_table liodn_bases[] = {
+#ifdef CONFIG_SYS_DPAA_DCE
+ [FSL_HW_PORTAL_DCE] = SET_LIODN_BASE_2(618, 694),
+#endif
+ [FSL_HW_PORTAL_SEC] = SET_LIODN_BASE_2(462, 558),
+#ifdef CONFIG_SYS_DPAA_FMAN
+ [FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(973),
+#if (CONFIG_SYS_NUM_FMAN == 2)
+ [FSL_HW_PORTAL_FMAN2] = SET_LIODN_BASE_1(1069),
+#endif
+#endif
+#ifdef CONFIG_SYS_DPAA_PME
+ [FSL_HW_PORTAL_PME] = SET_LIODN_BASE_2(770, 846),
+#endif
+#ifdef CONFIG_SYS_DPAA_RMAN
+ [FSL_HW_PORTAL_RMAN] = SET_LIODN_BASE_1(922),
+#endif
+};
diff --git a/arch/powerpc/cpu/mpc85xx/t4240_serdes.c b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c
new file mode 100644
index 0000000..102defa
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c
@@ -0,0 +1,237 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_serdes.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include "fsl_corenet2_serdes.h"
+
+struct serdes_config {
+ u32 protocol;
+ u8 lanes[SRDS_MAX_LANES];
+};
+
+static struct serdes_config serdes1_cfg_tbl[] = {
+ /* SerDes 1 */
+ {1, {XAUI_FM1_MAC9, XAUI_FM1_MAC9,
+ XAUI_FM1_MAC9, XAUI_FM1_MAC9,
+ XAUI_FM1_MAC10, XAUI_FM1_MAC10,
+ XAUI_FM1_MAC10, XAUI_FM1_MAC10}},
+ {2, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
+ HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
+ HIGIG_FM1_MAC10, HIGIG_FM1_MAC10,
+ HIGIG_FM1_MAC10, HIGIG_FM1_MAC10}},
+ {4, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
+ HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
+ HIGIG_FM1_MAC10, HIGIG_FM1_MAC10,
+ HIGIG_FM1_MAC10, HIGIG_FM1_MAC10}},
+ {28, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6,
+ SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9,
+ SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4}},
+ {36, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6,
+ SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9,
+ SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+ SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4}},
+ {38, {NONE, NONE, QSGMII_FM1_B, NONE,
+ NONE, NONE, QSGMII_FM1_A, NONE}},
+ {40, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6,
+ SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9,
+ NONE, NONE, QSGMII_FM1_A, NONE}},
+ {46, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6,
+ SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9,
+ NONE, NONE, QSGMII_FM1_A, NONE}},
+ {48, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6,
+ SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9,
+ NONE, NONE, QSGMII_FM1_A, NONE}},
+ {}
+};
+static struct serdes_config serdes2_cfg_tbl[] = {
+ /* SerDes 2 */
+ {1, {XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+ XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+ XAUI_FM2_MAC10, XAUI_FM2_MAC10,
+ XAUI_FM2_MAC10, XAUI_FM2_MAC10}},
+ {2, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC10, HIGIG_FM2_MAC10,
+ HIGIG_FM2_MAC10, HIGIG_FM2_MAC10}},
+ {4, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC10, HIGIG_FM2_MAC10,
+ HIGIG_FM2_MAC10, HIGIG_FM2_MAC10}},
+ {7, {XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+ XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+ {13, {XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+ XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+ {14, {XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+ XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+ {16, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+ {22, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+ {23, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+ {25, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+ {26, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+ {28, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
+ SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+ {36, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
+ SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+ {38, {NONE, NONE, QSGMII_FM2_B, NONE,
+ NONE, NONE, QSGMII_FM1_A, NONE}},
+ {40, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
+ SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
+ NONE, NONE, QSGMII_FM1_A, NONE}},
+ {46, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
+ SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
+ NONE, NONE, QSGMII_FM1_A, NONE}},
+ {48, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
+ SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
+ NONE, NONE, QSGMII_FM1_A, NONE}},
+ {50, {XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+ XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+ NONE, NONE, QSGMII_FM1_A, NONE}},
+ {52, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ NONE, NONE, QSGMII_FM1_A, NONE}},
+ {54, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+ NONE, NONE, QSGMII_FM1_A, NONE}},
+ {56, {XFI_FM1_MAC9, XFI_FM1_MAC10,
+ XFI_FM2_MAC10, XFI_FM2_MAC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+ {57, {XFI_FM1_MAC9, XFI_FM1_MAC10,
+ XFI_FM2_MAC10, XFI_FM2_MAC9,
+ SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+ SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+ {}
+};
+static struct serdes_config serdes3_cfg_tbl[] = {
+ /* SerDes 3 */
+ {2, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1}},
+ {4, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2}},
+ {6, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1}},
+ {8, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, NONE, NONE, NONE}},
+ {9, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+ INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN}},
+ {10, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+ INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN}},
+ {12, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+ PCIE2, PCIE2, PCIE2, PCIE2}},
+ {14, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+ PCIE2, PCIE2, PCIE2, PCIE2}},
+ {16, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+ SRIO1, SRIO1, SRIO1, SRIO1}},
+ {17, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+ SRIO1, SRIO1, SRIO1, SRIO1}},
+ {19, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+ SRIO1, SRIO1, SRIO1, SRIO1}},
+ {20, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+ SRIO1, SRIO1, SRIO1, SRIO1}},
+ {}
+};
+static struct serdes_config serdes4_cfg_tbl[] = {
+ /* SerDes 4 */
+ {2, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3}},
+ {4, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, PCIE4, PCIE4}},
+ {6, {PCIE3, PCIE3, PCIE3, PCIE3, SRIO2, SRIO2, SRIO2, SRIO2}},
+ {8, {PCIE3, PCIE3, PCIE3, PCIE3, SRIO2, SRIO2, SRIO2, SRIO2}},
+ {10, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, SATA1, SATA1}},
+ {12, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SATA1, SATA1}},
+ {14, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SRIO2, SRIO2}},
+ {16, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SRIO2, SRIO2}},
+ {18, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, AURORA, AURORA}},
+ {}
+};
+static struct serdes_config *serdes_cfg_tbl[] = {
+ serdes1_cfg_tbl,
+ serdes2_cfg_tbl,
+ serdes3_cfg_tbl,
+ serdes4_cfg_tbl,
+};
+
+enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane)
+{
+ struct serdes_config *ptr;
+
+ if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+ return 0;
+
+ ptr = serdes_cfg_tbl[serdes];
+ while (ptr->protocol) {
+ if (ptr->protocol == cfg)
+ return ptr->lanes[lane];
+ ptr++;
+ }
+ return 0;
+}
+
+int is_serdes_prtcl_valid(int serdes, u32 prtcl)
+{
+ int i;
+ struct serdes_config *ptr;
+
+ if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+ return 0;
+
+ ptr = serdes_cfg_tbl[serdes];
+ while (ptr->protocol) {
+ if (ptr->protocol == prtcl)
+ break;
+ ptr++;
+ }
+
+ if (!ptr->protocol)
+ return 0;
+
+ for (i = 0; i < SRDS_MAX_LANES; i++) {
+ if (ptr->lanes[i] != NONE)
+ return 1;
+ }
+
+ return 0;
+}
diff --git a/arch/powerpc/cpu/mpc85xx/tlb.c b/arch/powerpc/cpu/mpc85xx/tlb.c
index 929f6a6..a548dec 100644
--- a/arch/powerpc/cpu/mpc85xx/tlb.c
+++ b/arch/powerpc/cpu/mpc85xx/tlb.c
@@ -249,7 +249,7 @@ setup_ddr_tlbs_phys(phys_addr_t p_addr, unsigned int memsize_in_meg)
{
int i;
unsigned int tlb_size;
- unsigned int wimge = 0;
+ unsigned int wimge = MAS2_M;
unsigned int ram_tlb_address = (unsigned int)CONFIG_SYS_DDR_SDRAM_BASE;
unsigned int max_cam;
u64 size, memsize = (u64)memsize_in_meg << 20;
diff --git a/arch/powerpc/cpu/mpc86xx/fdt.c b/arch/powerpc/cpu/mpc86xx/fdt.c
index 61f5110..2f955fe 100644
--- a/arch/powerpc/cpu/mpc86xx/fdt.c
+++ b/arch/powerpc/cpu/mpc86xx/fdt.c
@@ -20,7 +20,7 @@ void ft_cpu_setup(void *blob, bd_t *bd)
{
#ifdef CONFIG_MP
int off;
- u32 bootpg = determine_mp_bootpg();
+ u32 bootpg = determine_mp_bootpg(NULL);
#endif
do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
diff --git a/arch/powerpc/cpu/mpc86xx/mp.c b/arch/powerpc/cpu/mpc86xx/mp.c
index 30c99eb..de705f0 100644
--- a/arch/powerpc/cpu/mpc86xx/mp.c
+++ b/arch/powerpc/cpu/mpc86xx/mp.c
@@ -90,8 +90,11 @@ int cpu_release(int nr, int argc, char * const argv[])
return 1;
}
-u32 determine_mp_bootpg(void)
+u32 determine_mp_bootpg(unsigned int *pagesize)
{
+ if (pagesize)
+ *pagesize = 4096;
+
/* if we have 4G or more of memory, put the boot page at 4Gb-1M */
if ((u64)gd->ram_size > 0xfffff000)
return (0xfff00000);
@@ -101,7 +104,7 @@ u32 determine_mp_bootpg(void)
void cpu_mp_lmb_reserve(struct lmb *lmb)
{
- u32 bootpg = determine_mp_bootpg();
+ u32 bootpg = determine_mp_bootpg(NULL);
/* tell u-boot we stole a page */
lmb_reserve(lmb, bootpg, 4096);
@@ -115,7 +118,7 @@ void setup_mp(void)
{
extern ulong __secondary_start_page;
ulong fixup = (ulong)&__secondary_start_page;
- u32 bootpg = determine_mp_bootpg();
+ u32 bootpg = determine_mp_bootpg(NULL);
u32 bootpg_va;
if (bootpg >= CONFIG_SYS_MAX_DDR_BAT_SIZE) {
diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c
index 78a8f92..2c487ca 100644
--- a/arch/powerpc/cpu/mpc8xxx/cpu.c
+++ b/arch/powerpc/cpu/mpc8xxx/cpu.c
@@ -73,6 +73,17 @@ struct cpu_type cpu_type_list [] = {
CPU_TYPE_ENTRY(P4080, P4080, 8),
CPU_TYPE_ENTRY(P5010, P5010, 1),
CPU_TYPE_ENTRY(P5020, P5020, 2),
+ CPU_TYPE_ENTRY(P5021, P5021, 2),
+ CPU_TYPE_ENTRY(P5040, P5040, 4),
+ CPU_TYPE_ENTRY(T4240, T4240, 0),
+ CPU_TYPE_ENTRY(T4120, T4120, 0),
+ CPU_TYPE_ENTRY(B4860, B4860, 0),
+ CPU_TYPE_ENTRY(G4860, G4860, 0),
+ CPU_TYPE_ENTRY(G4060, G4060, 0),
+ CPU_TYPE_ENTRY(B4440, B4440, 0),
+ CPU_TYPE_ENTRY(G4440, G4440, 0),
+ CPU_TYPE_ENTRY(B4420, B4420, 0),
+ CPU_TYPE_ENTRY(B4220, B4220, 0),
CPU_TYPE_ENTRY(BSC9130, 9130, 1),
CPU_TYPE_ENTRY(BSC9131, 9131, 1),
#elif defined(CONFIG_MPC86xx)
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
index 2592873..5928eb8 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
@@ -229,6 +229,26 @@ static void set_csn_config_2(int i, fsl_ddr_cfg_regs_t *ddr)
/* -3E = 667 CL5, -25 = CL6 800, -25E = CL5 800 */
#if !defined(CONFIG_FSL_DDR1)
+static inline int avoid_odt_overlap(const dimm_params_t *dimm_params)
+{
+#if CONFIG_DIMM_SLOTS_PER_CTLR == 1
+ if (dimm_params[0].n_ranks == 4)
+ return 1;
+#endif
+
+#if CONFIG_DIMM_SLOTS_PER_CTLR == 2
+ if ((dimm_params[0].n_ranks == 2) &&
+ (dimm_params[1].n_ranks == 2))
+ return 1;
+
+#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
+ if (dimm_params[0].n_ranks == 4)
+ return 1;
+#endif
+#endif
+ return 0;
+}
+
/*
* DDR SDRAM Timing Configuration 0 (TIMING_CFG_0)
*
@@ -236,7 +256,8 @@ static void set_csn_config_2(int i, fsl_ddr_cfg_regs_t *ddr)
* dreams up non-zero default values to be backwards compatible.
*/
static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts)
+ const memctl_options_t *popts,
+ const dimm_params_t *dimm_params)
{
unsigned char trwt_mclk = 0; /* Read-to-write turnaround */
unsigned char twrt_mclk = 0; /* Write-to-read turnaround */
@@ -266,7 +287,18 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr,
unsigned int data_rate = get_ddr_freq(0);
tmrd_mclk = 4;
/* set the turnaround time */
- trwt_mclk = 1;
+
+ /*
+ * for single quad-rank DIMM and two dual-rank DIMMs
+ * to avoid ODT overlap
+ */
+ if (avoid_odt_overlap(dimm_params)) {
+ twwt_mclk = 2;
+ trrt_mclk = 1;
+ }
+ /* for faster clock, need more time for data setup */
+ trwt_mclk = (data_rate/1000000 > 1800) ? 2 : 1;
+
if ((data_rate/1000000 > 1150) || (popts->memctl_interleaving))
twrt_mclk = 1;
@@ -451,8 +483,8 @@ static void set_timing_cfg_1(fsl_ddr_cfg_regs_t *ddr,
| ((caslat_ctrl & 0xF) << 16)
| ((refrec_ctrl & 0xF) << 12)
| ((wrrec_mclk & 0x0F) << 8)
- | ((acttoact_mclk & 0x07) << 4)
- | ((wrtord_mclk & 0x07) << 0)
+ | ((acttoact_mclk & 0x0F) << 4)
+ | ((wrtord_mclk & 0x0F) << 0)
);
debug("FSLDDR: timing_cfg_1 = 0x%08x\n", ddr->timing_cfg_1);
}
@@ -659,6 +691,7 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr,
unsigned int dqs_cfg; /* DQS configuration */
unsigned int odt_cfg = 0; /* ODT configuration */
unsigned int num_pr; /* Number of posted refreshes */
+ unsigned int slow = 0; /* DDR will be run less than 1250 */
unsigned int obc_cfg; /* On-The-Fly Burst Chop Cfg */
unsigned int ap_en; /* Address Parity Enable */
unsigned int d_init; /* DRAM data initialization */
@@ -692,6 +725,10 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr,
obc_cfg = 0;
#endif
+#if (CONFIG_SYS_FSL_DDR_VER >= FSL_DDR_VER_4_7)
+ slow = get_ddr_freq(0) < 1249000000;
+#endif
+
if (popts->registered_dimm_en) {
rcw_en = 1;
ap_en = popts->ap_en;
@@ -720,6 +757,7 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr,
| ((dqs_cfg & 0x3) << 26)
| ((odt_cfg & 0x3) << 21)
| ((num_pr & 0xf) << 12)
+ | ((slow & 1) << 11)
| (qd_en << 9)
| (unq_mrs_en << 8)
| ((obc_cfg & 0x1) << 6)
@@ -1347,6 +1385,11 @@ static void set_ddr_wrlvl_cntl(fsl_ddr_cfg_regs_t *ddr, unsigned int wrlvl_en,
| ((wrlvl_start & 0x1F) << 0)
);
debug("FSLDDR: wrlvl_cntl = 0x%08x\n", ddr->ddr_wrlvl_cntl);
+ ddr->ddr_wrlvl_cntl_2 = popts->wrlvl_ctl_2;
+ debug("FSLDDR: wrlvl_cntl_2 = 0x%08x\n", ddr->ddr_wrlvl_cntl_2);
+ ddr->ddr_wrlvl_cntl_3 = popts->wrlvl_ctl_3;
+ debug("FSLDDR: wrlvl_cntl_3 = 0x%08x\n", ddr->ddr_wrlvl_cntl_3);
+
}
/* DDR Self Refresh Counter (DDR_SR_CNTR) */
@@ -1370,6 +1413,12 @@ static void set_ddr_cdr1(fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts)
debug("FSLDDR: ddr_cdr1 = 0x%08x\n", ddr->ddr_cdr1);
}
+static void set_ddr_cdr2(fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts)
+{
+ ddr->ddr_cdr2 = popts->ddr_cdr2;
+ debug("FSLDDR: ddr_cdr2 = 0x%08x\n", ddr->ddr_cdr2);
+}
+
unsigned int
check_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr)
{
@@ -1466,7 +1515,7 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts,
break;
}
sa = common_dimm->base_address;
- ea = common_dimm->total_mem - 1;
+ ea = sa + common_dimm->total_mem - 1;
} else if (!popts->memctl_interleaving) {
/*
* If memory interleaving between controllers is NOT
@@ -1480,7 +1529,7 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts,
switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) {
case FSL_DDR_CS0_CS1_CS2_CS3:
sa = common_dimm->base_address;
- ea = common_dimm->total_mem - 1;
+ ea = sa + common_dimm->total_mem - 1;
break;
case FSL_DDR_CS0_CS1_AND_CS2_CS3:
if ((i >= 2) && (dimm_number == 0)) {
@@ -1537,17 +1586,19 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts,
sa >>= 24;
ea >>= 24;
- ddr->cs[i].bnds = (0
- | ((sa & 0xFFF) << 16) /* starting address MSB */
- | ((ea & 0xFFF) << 0) /* ending address MSB */
- );
+ if (cs_en) {
+ ddr->cs[i].bnds = (0
+ | ((sa & 0xFFF) << 16)/* starting address MSB */
+ | ((ea & 0xFFF) << 0) /* ending address MSB */
+ );
+ } else {
+ debug("FSLDDR: setting bnds to 0 for inactive CS\n");
+ ddr->cs[i].bnds = 0;
+ }
debug("FSLDDR: cs[%d]_bnds = 0x%08x\n", i, ddr->cs[i].bnds);
- if (cs_en) {
- set_csn_config(dimm_number, i, ddr, popts, dimm_params);
- set_csn_config_2(i, ddr);
- } else
- debug("CS%d is disabled.\n", i);
+ set_csn_config(dimm_number, i, ddr, popts, dimm_params);
+ set_csn_config_2(i, ddr);
}
/*
@@ -1560,7 +1611,7 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts,
set_ddr_eor(ddr, popts);
#if !defined(CONFIG_FSL_DDR1)
- set_timing_cfg_0(ddr, popts);
+ set_timing_cfg_0(ddr, popts, dimm_params);
#endif
set_timing_cfg_3(ddr, popts, common_dimm, cas_latency);
@@ -1569,6 +1620,7 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts,
cas_latency, additive_latency);
set_ddr_cdr1(ddr, popts);
+ set_ddr_cdr2(ddr, popts);
set_ddr_sdram_cfg(ddr, popts, common_dimm);
ip_rev = fsl_ddr_get_version();
if (ip_rev > 0x40400)
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c b/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c
index f59d105..cb71f94 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c
@@ -452,6 +452,8 @@ static void fsl_ddr_options_edit(fsl_ddr_info_t *pinfo,
CTRL_OPTIONS(rcw_override),
CTRL_OPTIONS(rcw_1),
CTRL_OPTIONS(rcw_2),
+ CTRL_OPTIONS(ddr_cdr1),
+ CTRL_OPTIONS(ddr_cdr2),
CTRL_OPTIONS(tCKE_clock_pulse_width_ps),
CTRL_OPTIONS(tFAW_window_four_activates_ps),
CTRL_OPTIONS(trwt_override),
@@ -518,6 +520,8 @@ static void print_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr)
CFG_REGS(timing_cfg_5),
CFG_REGS(ddr_zq_cntl),
CFG_REGS(ddr_wrlvl_cntl),
+ CFG_REGS(ddr_wrlvl_cntl_2),
+ CFG_REGS(ddr_wrlvl_cntl_3),
CFG_REGS(ddr_sr_cntr),
CFG_REGS(ddr_sdram_rcw_1),
CFG_REGS(ddr_sdram_rcw_2),
@@ -525,6 +529,7 @@ static void print_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr)
CFG_REGS(ddr_cdr2),
CFG_REGS(err_disable),
CFG_REGS(err_int_en),
+ CFG_REGS(ddr_eor),
};
static const unsigned int n_opts = ARRAY_SIZE(options);
@@ -584,6 +589,8 @@ static void fsl_ddr_regs_edit(fsl_ddr_info_t *pinfo,
CFG_REGS(timing_cfg_5),
CFG_REGS(ddr_zq_cntl),
CFG_REGS(ddr_wrlvl_cntl),
+ CFG_REGS(ddr_wrlvl_cntl_2),
+ CFG_REGS(ddr_wrlvl_cntl_3),
CFG_REGS(ddr_sr_cntr),
CFG_REGS(ddr_sdram_rcw_1),
CFG_REGS(ddr_sdram_rcw_2),
@@ -593,7 +600,7 @@ static void fsl_ddr_regs_edit(fsl_ddr_info_t *pinfo,
CFG_REGS(err_int_en),
CFG_REGS(ddr_sdram_rcw_2),
CFG_REGS(ddr_sdram_rcw_2),
-
+ CFG_REGS(ddr_eor),
};
static const unsigned int n_opts = ARRAY_SIZE(options);
@@ -689,6 +696,8 @@ static void print_memctl_options(const memctl_options_t *popts)
CTRL_OPTIONS(rcw_override),
CTRL_OPTIONS(rcw_1),
CTRL_OPTIONS(rcw_2),
+ CTRL_OPTIONS_HEX(ddr_cdr1),
+ CTRL_OPTIONS_HEX(ddr_cdr2),
CTRL_OPTIONS(tCKE_clock_pulse_width_ps),
CTRL_OPTIONS(tFAW_window_four_activates_ps),
CTRL_OPTIONS(trwt_override),
@@ -1597,6 +1606,7 @@ unsigned long long fsl_ddr_interactive(fsl_ddr_info_t *pinfo)
* doesn't return
*/
do_reset(NULL, 0, 0, NULL);
+ printf("Reset didn't work\n");
}
if (strcmp(argv[0], "recompute") == 0) {
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c
index 03a784c..6a1f4e4 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c
@@ -76,7 +76,7 @@ compute_cas_latency_ddr3(const dimm_params_t *dimm_params,
unsigned int
compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params,
common_timing_params_t *outpdimm,
- unsigned int number_of_dimms)
+ const unsigned int number_of_dimms)
{
unsigned int i, j;
@@ -126,13 +126,20 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params,
temp1++;
continue;
}
+
+ /*
+ * check if quad-rank DIMM is plugged if
+ * CONFIG_CHIP_SELECT_QUAD_CAPABLE is not defined
+ * Only the board with proper design is capable
+ */
+#ifndef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
if (dimm_params[i].n_ranks == 4 && \
CONFIG_CHIP_SELECTS_PER_CTRL/CONFIG_DIMM_SLOTS_PER_CTLR < 4) {
printf("Found Quad-rank DIMM, not able to support.");
temp1++;
continue;
}
-
+#endif
/*
* Find minimum tCKmax_ps to find fastest slow speed,
* i.e., this is the slowest the whole system can go.
@@ -236,11 +243,14 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params,
if (outpdimm->all_DIMMs_registered)
for (j = 0; j < 16; j++) {
outpdimm->rcw[j] = dimm_params[0].rcw[j];
- for (i = 1; i < number_of_dimms; i++)
+ for (i = 1; i < number_of_dimms; i++) {
+ if (!dimm_params[i].n_ranks)
+ continue;
if (dimm_params[i].rcw[j] != dimm_params[0].rcw[j]) {
temp1 = 1;
break;
}
+ }
}
if (temp1 != 0)
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/main.c b/arch/powerpc/cpu/mpc8xxx/ddr/main.c
index b47268c..d6b73c7 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/main.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/main.c
@@ -77,7 +77,19 @@ static void __get_spd(generic_spd_eeprom_t *spd, u8 i2c_address)
sizeof(generic_spd_eeprom_t));
if (ret) {
- printf("DDR: failed to read SPD from address %u\n", i2c_address);
+ if (i2c_address ==
+#ifdef SPD_EEPROM_ADDRESS
+ SPD_EEPROM_ADDRESS
+#elif defined(SPD_EEPROM_ADDRESS1)
+ SPD_EEPROM_ADDRESS1
+#endif
+ ) {
+ printf("DDR: failed to read SPD from address %u\n",
+ i2c_address);
+ } else {
+ debug("DDR: failed to read SPD from address %u\n",
+ i2c_address);
+ }
memset(spd, 0, sizeof(generic_spd_eeprom_t));
}
}
@@ -526,6 +538,17 @@ phys_size_t fsl_ddr_sdram(void)
#endif
total_memory = fsl_ddr_compute(&info, STEP_GET_SPD, 0);
+ /* setup 3-way interleaving before enabling DDRC */
+ switch (info.memctl_opts[0].memctl_interleaving_mode) {
+ case FSL_DDR_3WAY_1KB_INTERLEAVING:
+ case FSL_DDR_3WAY_4KB_INTERLEAVING:
+ case FSL_DDR_3WAY_8KB_INTERLEAVING:
+ fsl_ddr_set_intl3r(info.memctl_opts[0].memctl_interleaving_mode);
+ break;
+ default:
+ break;
+ }
+
/* Program configuration registers. */
for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
debug("Programming controller %u\n", i);
@@ -561,7 +584,6 @@ phys_size_t fsl_ddr_sdram(void)
case FSL_DDR_3WAY_8KB_INTERLEAVING:
law_memctl = LAW_TRGT_IF_DDR_INTLV_123;
if (i == 0) {
- fsl_ddr_set_intl3r(info.memctl_opts[i].memctl_interleaving_mode);
fsl_ddr_set_lawbar(&info.common_timing_params[i],
law_memctl, i);
}
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/options.c b/arch/powerpc/cpu/mpc8xxx/ddr/options.c
index 13e4825..2f13b8f 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/options.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/options.c
@@ -474,6 +474,34 @@ static const struct dynamic_odt odt_unknown[4] = {
}
};
#endif
+
+/*
+ * Automatically seleect bank interleaving mode based on DIMMs
+ * in this order: cs0_cs1_cs2_cs3, cs0_cs1, null.
+ * This function only deal with one or two slots per controller.
+ */
+static inline unsigned int auto_bank_intlv(dimm_params_t *pdimm)
+{
+#if (CONFIG_DIMM_SLOTS_PER_CTLR == 1)
+ if (pdimm[0].n_ranks == 4)
+ return FSL_DDR_CS0_CS1_CS2_CS3;
+ else if (pdimm[0].n_ranks == 2)
+ return FSL_DDR_CS0_CS1;
+#elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
+#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
+ if (pdimm[0].n_ranks == 4)
+ return FSL_DDR_CS0_CS1_CS2_CS3;
+#endif
+ if (pdimm[0].n_ranks == 2) {
+ if (pdimm[1].n_ranks == 2)
+ return FSL_DDR_CS0_CS1_CS2_CS3;
+ else
+ return FSL_DDR_CS0_CS1;
+ }
+#endif
+ return 0;
+}
+
unsigned int populate_memctl_options(int all_DIMMs_registered,
memctl_options_t *popts,
dimm_params_t *pdimm,
@@ -510,6 +538,14 @@ unsigned int populate_memctl_options(int all_DIMMs_registered,
}
} else if (CONFIG_DIMM_SLOTS_PER_CTLR == 2) {
switch (pdimm[0].n_ranks) {
+#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
+ case 4:
+ pdodt = single_Q;
+ if (pdimm[1].n_ranks)
+ printf("Error: Quad- and Dual-rank DIMMs "
+ "cannot be used together\n");
+ break;
+#endif
case 2:
switch (pdimm[1].n_ranks) {
case 2:
@@ -900,6 +936,9 @@ done:
else if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv",
"cs0_cs1_cs2_cs3", buf))
popts->ba_intlv_ctl = FSL_DDR_CS0_CS1_CS2_CS3;
+ else if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv",
+ "auto", buf))
+ popts->ba_intlv_ctl = auto_bank_intlv(pdimm);
else
printf("hwconfig has unrecognized parameter for bank_intlv.\n");
switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) {
@@ -912,6 +951,10 @@ done:
"interleaving disabled!\n", ctrl_num);
}
#elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
+#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
+ if (pdimm[0].n_ranks == 4)
+ break;
+#endif
if ((pdimm[0].n_ranks < 2) && (pdimm[1].n_ranks < 2)) {
popts->ba_intlv_ctl = 0;
printf("Not enough bank(chip-select) for "
@@ -1063,7 +1106,7 @@ void check_interleaving_options(fsl_ddr_info_t *pinfo)
break;
}
debug("%d of %d controllers are interleaving.\n", j, k);
- if (j != k) {
+ if (j && (j != k)) {
for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++)
pinfo->memctl_opts[i].memctl_interleaving = 0;
printf("Not all controllers have compatible "
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/util.c b/arch/powerpc/cpu/mpc8xxx/ddr/util.c
index 664ad09..940ffff 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/util.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/util.c
@@ -121,6 +121,16 @@ void fsl_ddr_set_intl3r(const unsigned int granule_size)
#endif
}
+u32 fsl_ddr_get_intl3r(void)
+{
+ u32 val = 0;
+#ifdef CONFIG_E6500
+ u32 *mcintl3r = (void *) (CONFIG_SYS_IMMR + 0x18004);
+ val = *mcintl3r;
+#endif
+ return val;
+}
+
void board_add_ram_info(int use_default)
{
#if defined(CONFIG_MPC83xx)
@@ -140,6 +150,18 @@ void board_add_ram_info(int use_default)
uint32_t sdram_cfg = in_be32(&ddr->sdram_cfg);
int cas_lat;
+#if CONFIG_NUM_DDR_CONTROLLERS >= 2
+ if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) {
+ ddr = (void __iomem *)CONFIG_SYS_MPC85xx_DDR2_ADDR;
+ sdram_cfg = in_be32(&ddr->sdram_cfg);
+ }
+#endif
+#if CONFIG_NUM_DDR_CONTROLLERS >= 3
+ if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) {
+ ddr = (void __iomem *)CONFIG_SYS_MPC85xx_DDR3_ADDR;
+ sdram_cfg = in_be32(&ddr->sdram_cfg);
+ }
+#endif
puts(" (DDR");
switch ((sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK) >>
SDRAM_CFG_SDRAM_TYPE_SHIFT) {
diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c
index 32ab050..68db8e2 100644
--- a/arch/powerpc/cpu/mpc8xxx/fdt.c
+++ b/arch/powerpc/cpu/mpc8xxx/fdt.c
@@ -139,6 +139,8 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd)
const char *phys[] = { "ulpi", "utmi" };
const char *mode = NULL;
const char *phy_type = NULL;
+ const char *dr_mode_type = NULL;
+ const char *dr_phy_type = NULL;
char usb1_defined = 0;
int usb_mode_off = -1;
int usb_phy_off = -1;
@@ -156,6 +158,7 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd)
break;
}
}
+
for (j = 0; j < ARRAY_SIZE(phys); j++) {
if (hwconfig_subarg_cmp(str, "phy_type",
phys[j])) {
@@ -163,31 +166,46 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd)
break;
}
}
- if (mode_idx >= 0) {
- usb_mode_off = fdt_fixup_usb_mode_phy_type(blob,
- modes[mode_idx], NULL, usb_mode_off);
- if (usb_mode_off < 0)
- return;
- }
- if (phy_idx >= 0) {
- usb_phy_off = fdt_fixup_usb_mode_phy_type(blob,
- NULL, phys[phy_idx], usb_phy_off);
- if (usb_phy_off < 0)
- return;
- }
+
+ dr_mode_type = modes[mode_idx];
+ dr_phy_type = phys[phy_idx];
+
+ /* use usb_dr_mode and usb_phy_type if
+ usb1_defined = 0; these variables are to
+ be deprecated */
if (!strcmp(str, "usb1"))
usb1_defined = 1;
- if (mode_idx < 0 && phy_idx < 0)
+
+ if (mode_idx < 0 && phy_idx < 0) {
printf("WARNING: invalid phy or mode\n");
+ return;
+ }
}
+
+ usb_mode_off = fdt_fixup_usb_mode_phy_type(blob,
+ dr_mode_type, NULL, usb_mode_off);
+
+ if (usb_mode_off < 0)
+ return;
+
+ usb_phy_off = fdt_fixup_usb_mode_phy_type(blob,
+ NULL, dr_phy_type, usb_phy_off);
+
+ if (usb_phy_off < 0)
+ return;
}
+
if (!usb1_defined) {
int usb_off = -1;
mode = getenv("usb_dr_mode");
phy_type = getenv("usb_phy_type");
- if (!mode && !phy_type)
- return;
- fdt_fixup_usb_mode_phy_type(blob, mode, phy_type, usb_off);
+ if (mode || phy_type) {
+ printf("WARNING: usb_dr_mode and usb_phy_type "
+ "are to be deprecated soon. Use "
+ "hwconfig to set these values instead!!\n");
+ fdt_fixup_usb_mode_phy_type(blob, mode,
+ phy_type, usb_off);
+ }
}
}
#endif /* defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) */
diff --git a/arch/powerpc/cpu/mpc8xxx/srio.c b/arch/powerpc/cpu/mpc8xxx/srio.c
index 0cb65b3..6e6f7dc 100644
--- a/arch/powerpc/cpu/mpc8xxx/srio.c
+++ b/arch/powerpc/cpu/mpc8xxx/srio.c
@@ -22,7 +22,9 @@
#include <asm/fsl_law.h>
#include <asm/fsl_serdes.h>
#include <asm/fsl_srio.h>
+#include <asm/errno.h>
+#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER
#define SRIO_PORT_ACCEPT_ALL 0x10000001
#define SRIO_IB_ATMU_AR 0x80f55000
#define SRIO_OB_ATMU_AR_MAINT 0x80077000
@@ -31,10 +33,16 @@
#define SRIO_MAINT_WIN_SIZE 0x1000000 /* 16M */
#define SRIO_RW_WIN_SIZE 0x100000 /* 1M */
#define SRIO_LCSBA1CSR 0x60000000
+#endif
#if defined(CONFIG_FSL_CORENET)
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+ #define _DEVDISR_SRIO1 FSL_CORENET_DEVDISR3_SRIO1
+ #define _DEVDISR_SRIO2 FSL_CORENET_DEVDISR3_SRIO2
+#else
#define _DEVDISR_SRIO1 FSL_CORENET_DEVDISR_SRIO1
#define _DEVDISR_SRIO2 FSL_CORENET_DEVDISR_SRIO2
+#endif
#define _DEVDISR_RMU FSL_CORENET_DEVDISR_RMU
#define CONFIG_SYS_MPC8xxx_GUTS_ADDR CONFIG_SYS_MPC85xx_GUTS_ADDR
#elif defined(CONFIG_MPC85xx)
@@ -52,16 +60,206 @@
#error "No defines for DEVDISR_SRIO"
#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
+/*
+ * Erratum A-004034
+ * Affects: SRIO
+ * Description: During port initialization, the SRIO port performs
+ * lane synchronization (detecting valid symbols on a lane) and
+ * lane alignment (coordinating multiple lanes to receive valid data
+ * across lanes). Internal errors in lane synchronization and lane
+ * alignment may cause failure to achieve link initialization at
+ * the configured port width.
+ * An SRIO port configured as a 4x port may see one of these scenarios:
+ * 1. One or more lanes fails to achieve lane synchronization. Depending
+ * on which lanes fail, this may result in downtraining from 4x to 1x
+ * on lane 0, 4x to 1x on lane R (redundant lane).
+ * 2. The link may fail to achieve lane alignment as a 4x, even though
+ * all 4 lanes achieve lane synchronization, and downtrain to a 1x.
+ * An SRIO port configured as a 1x port may fail to complete port
+ * initialization (PnESCSR[PU] never deasserts) because of scenario 1.
+ * Impact: SRIO port may downtrain to 1x, or may fail to complete
+ * link initialization. Once a port completes link initialization
+ * successfully, it will operate normally.
+ */
+static int srio_erratum_a004034(u8 port)
+{
+ serdes_corenet_t *srds_regs;
+ u32 conf_lane;
+ u32 init_lane;
+ int idx, first, last;
+ u32 i;
+ unsigned long long end_tick;
+ struct ccsr_rio *srio_regs = (void *)CONFIG_SYS_FSL_SRIO_ADDR;
+
+ srds_regs = (void *)(CONFIG_SYS_FSL_CORENET_SERDES_ADDR);
+ conf_lane = (in_be32((void *)&srds_regs->srdspccr0)
+ >> (12 - port * 4)) & 0x3;
+ init_lane = (in_be32((void *)&srio_regs->lp_serial
+ .port[port].pccsr) >> 27) & 0x7;
+
+ /*
+ * Start a counter set to ~2 ms after the SERDES reset is
+ * complete (SERDES SRDSBnRSTCTL[RST_DONE]=1 for n
+ * corresponding to the SERDES bank/PLL for the SRIO port).
+ */
+ if (in_be32((void *)&srds_regs->bank[0].rstctl)
+ & SRDS_RSTCTL_RSTDONE) {
+ /*
+ * Poll the port uninitialized status (SRIO PnESCSR[PO]) until
+ * PO=1 or the counter expires. If the counter expires, the
+ * port has failed initialization: go to recover steps. If PO=1
+ * and the desired port width is 1x, go to normal steps. If
+ * PO = 1 and the desired port width is 4x, go to recover steps.
+ */
+ end_tick = usec2ticks(2000) + get_ticks();
+ do {
+ if (in_be32((void *)&srio_regs->lp_serial
+ .port[port].pescsr) & 0x2) {
+ if (conf_lane == 0x1)
+ goto host_ok;
+ else {
+ if (init_lane == 0x2)
+ goto host_ok;
+ else
+ break;
+ }
+ }
+ } while (end_tick > get_ticks());
+
+ /* recover at most 3 times */
+ for (i = 0; i < 3; i++) {
+ /* Set SRIO PnCCSR[PD]=1 */
+ setbits_be32((void *)&srio_regs->lp_serial
+ .port[port].pccsr,
+ 0x800000);
+ /*
+ * Set SRIO PnPCR[OBDEN] on the host to
+ * enable the discarding of any pending packets.
+ */
+ setbits_be32((void *)&srio_regs->impl.port[port].pcr,
+ 0x04);
+ /* Wait 50 us */
+ udelay(50);
+ /* Run sync command */
+ isync();
+
+ if (port)
+ first = serdes_get_first_lane(SRIO2);
+ else
+ first = serdes_get_first_lane(SRIO1);
+ if (unlikely(first < 0))
+ return -ENODEV;
+ if (conf_lane == 0x1)
+ last = first;
+ else
+ last = first + 3;
+ /*
+ * Set SERDES BnGCRm0[RRST]=0 for each SRIO
+ * bank n and lane m.
+ */
+ for (idx = first; idx <= last; idx++)
+ clrbits_be32(&srds_regs->lane[idx].gcr0,
+ SRDS_GCR0_RRST);
+ /*
+ * Read SERDES BnGCRm0 for each SRIO
+ * bank n and lane m
+ */
+ for (idx = first; idx <= last; idx++)
+ in_be32(&srds_regs->lane[idx].gcr0);
+ /* Run sync command */
+ isync();
+ /* Wait >= 100 ns */
+ udelay(1);
+ /*
+ * Set SERDES BnGCRm0[RRST]=1 for each SRIO
+ * bank n and lane m.
+ */
+ for (idx = first; idx <= last; idx++)
+ setbits_be32(&srds_regs->lane[idx].gcr0,
+ SRDS_GCR0_RRST);
+ /*
+ * Read SERDES BnGCRm0 for each SRIO
+ * bank n and lane m
+ */
+ for (idx = first; idx <= last; idx++)
+ in_be32(&srds_regs->lane[idx].gcr0);
+ /* Run sync command */
+ isync();
+ /* Wait >= 300 ns */
+ udelay(1);
+
+ /* Write 1 to clear all bits in SRIO PnSLCSR */
+ out_be32((void *)&srio_regs->impl.port[port].slcsr,
+ 0xffffffff);
+ /* Clear SRIO PnPCR[OBDEN] on the host */
+ clrbits_be32((void *)&srio_regs->impl.port[port].pcr,
+ 0x04);
+ /* Set SRIO PnCCSR[PD]=0 */
+ clrbits_be32((void *)&srio_regs->lp_serial
+ .port[port].pccsr,
+ 0x800000);
+ /* Wait >= 24 ms */
+ udelay(24000);
+ /* Poll the state of the port again */
+ init_lane =
+ (in_be32((void *)&srio_regs->lp_serial
+ .port[port].pccsr) >> 27) & 0x7;
+ if (in_be32((void *)&srio_regs->lp_serial
+ .port[port].pescsr) & 0x2) {
+ if (conf_lane == 0x1)
+ goto host_ok;
+ else {
+ if (init_lane == 0x2)
+ goto host_ok;
+ }
+ }
+ if (i == 2)
+ return -ENODEV;
+ }
+ } else
+ return -ENODEV;
+
+host_ok:
+ /* Poll PnESCSR[OES] on the host until it is clear */
+ end_tick = usec2ticks(1000000) + get_ticks();
+ do {
+ if (!(in_be32((void *)&srio_regs->lp_serial.port[port].pescsr)
+ & 0x10000)) {
+ out_be32(((void *)&srio_regs->lp_serial
+ .port[port].pescsr), 0xffffffff);
+ out_be32(((void *)&srio_regs->phys_err
+ .port[port].edcsr), 0);
+ out_be32(((void *)&srio_regs->logical_err.ltledcsr), 0);
+ return 0;
+ }
+ } while (end_tick > get_ticks());
+
+ return -ENODEV;
+}
+#endif
+
void srio_init(void)
{
ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC8xxx_GUTS_ADDR;
int srio1_used = 0, srio2_used = 0;
+ u32 *devdisr;
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+ devdisr = &gur->devdisr3;
+#else
+ devdisr = &gur->devdisr;
+#endif
if (is_serdes_configured(SRIO1)) {
set_next_law(CONFIG_SYS_SRIO1_MEM_PHYS,
law_size_bits(CONFIG_SYS_SRIO1_MEM_SIZE),
LAW_TRGT_IF_RIO_1);
srio1_used = 1;
+#ifdef CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
+ if (srio_erratum_a004034(0) < 0)
+ printf("SRIO1: enabled but port error\n");
+ else
+#endif
printf("SRIO1: enabled\n");
} else {
printf("SRIO1: disabled\n");
@@ -73,7 +271,13 @@ void srio_init(void)
law_size_bits(CONFIG_SYS_SRIO2_MEM_SIZE),
LAW_TRGT_IF_RIO_2);
srio2_used = 1;
+#ifdef CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
+ if (srio_erratum_a004034(1) < 0)
+ printf("SRIO2: enabled but port error\n");
+ else
+#endif
printf("SRIO2: enabled\n");
+
} else {
printf("SRIO2: disabled\n");
}
@@ -82,20 +286,20 @@ void srio_init(void)
#ifdef CONFIG_FSL_CORENET
/* On FSL_CORENET devices we can disable individual ports */
if (!srio1_used)
- setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_SRIO1);
+ setbits_be32(devdisr, _DEVDISR_SRIO1);
if (!srio2_used)
- setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_SRIO2);
+ setbits_be32(devdisr, _DEVDISR_SRIO2);
#endif
/* neither port is used - disable everything */
if (!srio1_used && !srio2_used) {
- setbits_be32(&gur->devdisr, _DEVDISR_SRIO1);
- setbits_be32(&gur->devdisr, _DEVDISR_SRIO2);
- setbits_be32(&gur->devdisr, _DEVDISR_RMU);
+ setbits_be32(devdisr, _DEVDISR_SRIO1);
+ setbits_be32(devdisr, _DEVDISR_SRIO2);
+ setbits_be32(devdisr, _DEVDISR_RMU);
}
}
-#ifdef CONFIG_FSL_CORENET
+#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER
void srio_boot_master(int port)
{
struct ccsr_rio *srio = (void *)CONFIG_SYS_FSL_SRIO_ADDR;
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index aa27741..03baaee 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -27,6 +27,8 @@
#error "Do not define CONFIG_SYS_CCSRBAR_DEFAULT in the board header file."
#endif
+#define FSL_DDR_VER_4_7 47
+
/* Number of TLB CAM entries we have on FSL Book-E chips */
#if defined(CONFIG_E500MC)
#define CONFIG_SYS_NUM_TLBCAMS 64
@@ -311,6 +313,7 @@
#define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM 2
#elif defined(CONFIG_PPC_P2041) /* also supports P2040 */
+#define CONFIG_SYS_FSL_QORIQ_CHASSIS1
#define CONFIG_MAX_CPUS 4
#define CONFIG_SYS_FSL_NUM_CC_PLLS 2
#define CONFIG_SYS_FSL_NUM_LAWS 32
@@ -331,6 +334,7 @@
#define CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011
#define CONFIG_SYS_FSL_ERRATUM_CPU_A003999
#define CONFIG_SYS_FSL_ERRATUM_DDR_A003474
+#define CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
@@ -338,8 +342,10 @@
#define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV 0x10
#define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV2 0x11
#define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000
+#define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
#elif defined(CONFIG_PPC_P3041)
+#define CONFIG_SYS_FSL_QORIQ_CHASSIS1
#define CONFIG_MAX_CPUS 4
#define CONFIG_SYS_FSL_NUM_CC_PLLS 2
#define CONFIG_SYS_FSL_NUM_LAWS 32
@@ -360,6 +366,7 @@
#define CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011
#define CONFIG_SYS_FSL_ERRATUM_CPU_A003999
#define CONFIG_SYS_FSL_ERRATUM_DDR_A003474
+#define CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
@@ -367,8 +374,10 @@
#define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV 0x10
#define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV2 0x11
#define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000
+#define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
#elif defined(CONFIG_PPC_P4080) /* also supports P4040 */
+#define CONFIG_SYS_FSL_QORIQ_CHASSIS1
#define CONFIG_MAX_CPUS 8
#define CONFIG_SYS_FSL_NUM_CC_PLLS 4
#define CONFIG_SYS_FSL_NUM_LAWS 32
@@ -389,7 +398,7 @@
#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_SYS_FSL_ERRATUM_ESDHC135
-#define CONFIG_SYS_FSL_ERRATUM_ESDHC136
+#define CONFIG_SYS_FSL_ERRATUM_ESDHC13
#define CONFIG_SYS_P4080_ERRATUM_CPU22
#define CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011
#define CONFIG_SYS_P4080_ERRATUM_SERDES8
@@ -398,6 +407,7 @@
#define CONFIG_SYS_P4080_ERRATUM_SERDES_A005
#define CONFIG_SYS_FSL_ERRATUM_CPU_A003999
#define CONFIG_SYS_FSL_ERRATUM_DDR_A003474
+#define CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
@@ -406,8 +416,11 @@
#define CONFIG_SYS_FSL_ERRATUM_A004510
#define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV 0x20
#define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xff000000
+#define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
#elif defined(CONFIG_PPC_P5020) /* also supports P5010 */
+#define CONFIG_SYS_PPC64 /* 64-bit core */
+#define CONFIG_SYS_FSL_QORIQ_CHASSIS1
#define CONFIG_MAX_CPUS 2
#define CONFIG_SYS_FSL_NUM_CC_PLLS 2
#define CONFIG_SYS_FSL_NUM_LAWS 32
@@ -426,12 +439,43 @@
#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_SYS_FSL_ERRATUM_DDR_A003474
+#define CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
#define CONFIG_SYS_FSL_ERRATUM_A004510
#define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV 0x10
#define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xc0000000
+#define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
+
+#elif defined(CONFIG_PPC_P5040)
+#define CONFIG_SYS_FSL_QORIQ_CHASSIS1
+#define CONFIG_MAX_CPUS 4
+#define CONFIG_SYS_FSL_NUM_CC_PLLS 3
+#define CONFIG_SYS_FSL_NUM_LAWS 32
+#define CONFIG_SYS_FSL_SEC_COMPAT 4
+#define CONFIG_SYS_NUM_FMAN 2
+#define CONFIG_SYS_NUM_FM1_DTSEC 5
+#define CONFIG_SYS_NUM_FM1_10GEC 1
+#define CONFIG_SYS_NUM_FM2_DTSEC 5
+#define CONFIG_SYS_NUM_FM2_10GEC 1
+#define CONFIG_NUM_DDR_CONTROLLERS 2
+#define CONFIG_SYS_FM_MURAM_SIZE 0x28000
+#define CONFIG_SYS_FSL_TBCLK_DIV 16
+#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.4"
+#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
+#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
+#define CONFIG_SYS_FSL_USB2_PHY_ENABLE
+#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
+#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
+#define CONFIG_SYS_FSL_ERRATUM_USB138
+#define CONFIG_SYS_FSL_ERRATUM_DDR_A003
+#define CONFIG_SYS_FSL_ERRATUM_DDR_A003474
+#define CONFIG_SYS_FSL_ERRATUM_A004699
+#define CONFIG_SYS_FSL_ELBC_MULTIBIT_ECC
+#define CONFIG_SYS_FSL_ERRATUM_A004510
+#define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV 0x10
+#define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000
#elif defined(CONFIG_BSC9131)
#define CONFIG_MAX_CPUS 1
@@ -445,6 +489,63 @@
#define CONFIG_SYS_FSL_ERRATUM_IFC_A003399
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
+#elif defined(CONFIG_PPC_T4240)
+#define CONFIG_SYS_PPC64 /* 64-bit core */
+#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */
+#define CONFIG_SYS_FSL_QORIQ_CHASSIS2 /* Freescale Chassis generation 2 */
+#define CONFIG_SYS_FSL_QMAN_V3 /* QMAN version 3 */
+#define CONFIG_MAX_CPUS 12
+#define CONFIG_SYS_FSL_NUM_CC_PLLS 5
+#define CONFIG_SYS_FSL_NUM_LAWS 32
+#define CONFIG_SYS_FSL_SRDS_3
+#define CONFIG_SYS_FSL_SRDS_4
+#define CONFIG_SYS_FSL_SEC_COMPAT 4
+#define CONFIG_SYS_NUM_FMAN 2
+#define CONFIG_SYS_NUM_FM1_DTSEC 8
+#define CONFIG_SYS_NUM_FM1_10GEC 2
+#define CONFIG_SYS_NUM_FM2_DTSEC 8
+#define CONFIG_SYS_NUM_FM2_10GEC 2
+#define CONFIG_NUM_DDR_CONTROLLERS 3
+#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_4_7
+#define CONFIG_SYS_FMAN_V3
+#define CONFIG_SYS_FM_MURAM_SIZE 0x60000
+#define CONFIG_SYS_FSL_TBCLK_DIV 16
+#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v3.0"
+#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
+#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
+#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
+#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
+#define CONFIG_SYS_FSL_USB2_PHY_ENABLE
+#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
+#define CONFIG_SYS_FSL_ERRATUM_A004468
+#define CONFIG_SYS_FSL_ERRATUM_A_004934
+#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
+
+#elif defined(CONFIG_PPC_B4860)
+#define CONFIG_SYS_PPC64 /* 64-bit core */
+#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */
+#define CONFIG_SYS_FSL_QORIQ_CHASSIS2 /* Freescale Chassis generation 2 */
+#define CONFIG_SYS_FSL_QMAN_V3 /* QMAN version 3 */
+#define CONFIG_MAX_CPUS 4
+#define CONFIG_SYS_FSL_NUM_CC_PLLS 4
+#define CONFIG_SYS_FSL_NUM_LAWS 32
+#define CONFIG_SYS_FSL_SEC_COMPAT 4
+#define CONFIG_SYS_NUM_FMAN 1
+#define CONFIG_SYS_NUM_FM1_DTSEC 6
+#define CONFIG_SYS_NUM_FM1_10GEC 2
+#define CONFIG_NUM_DDR_CONTROLLERS 1
+#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_4_7
+#define CONFIG_SYS_FMAN_V3
+#define CONFIG_SYS_FM_MURAM_SIZE 0x60000
+#define CONFIG_SYS_FSL_TBCLK_DIV 16
+#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.4"
+#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
+#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
+#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
+#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
+#define CONFIG_SYS_FSL_ERRATUM_A_004934
+#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
+
#else
#error Processor type not defined for this platform
#endif
diff --git a/arch/powerpc/include/asm/fsl_ddr_sdram.h b/arch/powerpc/include/asm/fsl_ddr_sdram.h
index e271342..640d329 100644
--- a/arch/powerpc/include/asm/fsl_ddr_sdram.h
+++ b/arch/powerpc/include/asm/fsl_ddr_sdram.h
@@ -84,6 +84,8 @@ typedef ddr3_spd_eeprom_t generic_spd_eeprom_t;
#define FSL_DDR_4WAY_4KB_INTERLEAVING 0x1C
#define FSL_DDR_4WAY_8KB_INTERLEAVING 0x1D
+#define SDRAM_CS_CONFIG_EN 0x80000000
+
/* DDR_SDRAM_CFG - DDR SDRAM Control Configuration
*/
#define SDRAM_CFG_MEM_EN 0x80000000
@@ -96,6 +98,7 @@ typedef ddr3_spd_eeprom_t generic_spd_eeprom_t;
#define SDRAM_CFG_SDRAM_TYPE_SHIFT 24
#define SDRAM_CFG_DYN_PWR 0x00200000
#define SDRAM_CFG_DBW_MASK 0x00180000
+#define SDRAM_CFG_DBW_SHIFT 19
#define SDRAM_CFG_32_BE 0x00080000
#define SDRAM_CFG_16_BE 0x00100000
#define SDRAM_CFG_8_BE 0x00040000
@@ -145,6 +148,31 @@ typedef ddr3_spd_eeprom_t generic_spd_eeprom_t;
/* DDR_CDR1 */
#define DDR_CDR1_DHC_EN 0x80000000
+#define DDR_CDR1_ODT_SHIFT 17
+#define DDR_CDR1_ODT_MASK 0x6
+#define DDR_CDR2_ODT_MASK 0x1
+#define DDR_CDR1_ODT(x) ((x & DDR_CDR1_ODT_MASK) << DDR_CDR1_ODT_SHIFT)
+#define DDR_CDR2_ODT(x) (x & DDR_CDR2_ODT_MASK)
+
+#if (defined(CONFIG_SYS_FSL_DDR_VER) && \
+ (CONFIG_SYS_FSL_DDR_VER >= FSL_DDR_VER_4_7))
+#define DDR_CDR_ODT_OFF 0x0
+#define DDR_CDR_ODT_120ohm 0x1
+#define DDR_CDR_ODT_180ohm 0x2
+#define DDR_CDR_ODT_75ohm 0x3
+#define DDR_CDR_ODT_110ohm 0x4
+#define DDR_CDR_ODT_60hm 0x5
+#define DDR_CDR_ODT_70ohm 0x6
+#define DDR_CDR_ODT_47ohm 0x7
+#else
+#define DDR_CDR_ODT_75ohm 0x0
+#define DDR_CDR_ODT_55ohm 0x1
+#define DDR_CDR_ODT_60ohm 0x2
+#define DDR_CDR_ODT_50ohm 0x3
+#define DDR_CDR_ODT_150ohm 0x4
+#define DDR_CDR_ODT_43ohm 0x5
+#define DDR_CDR_ODT_120ohm 0x6
+#endif
/* Record of register values computed */
typedef struct fsl_ddr_cfg_regs_s {
@@ -177,6 +205,8 @@ typedef struct fsl_ddr_cfg_regs_s {
unsigned int timing_cfg_5;
unsigned int ddr_zq_cntl;
unsigned int ddr_wrlvl_cntl;
+ unsigned int ddr_wrlvl_cntl_2;
+ unsigned int ddr_wrlvl_cntl_3;
unsigned int ddr_sr_cntr;
unsigned int ddr_sdram_rcw_1;
unsigned int ddr_sdram_rcw_2;
@@ -262,6 +292,8 @@ typedef struct memctl_options_s {
unsigned int wrlvl_override;
unsigned int wrlvl_sample; /* Write leveling */
unsigned int wrlvl_start;
+ unsigned int wrlvl_ctl_2;
+ unsigned int wrlvl_ctl_3;
unsigned int half_strength_driver_enable;
unsigned int twoT_en;
@@ -288,6 +320,7 @@ typedef struct memctl_options_s {
unsigned int rcw_2;
/* control register 1 */
unsigned int ddr_cdr1;
+ unsigned int ddr_cdr2;
unsigned int trwt_override;
unsigned int trwt; /* read-to-write turnaround */
@@ -298,6 +331,7 @@ extern phys_size_t fsl_ddr_sdram_size(void);
extern int fsl_use_spd(void);
extern void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
unsigned int ctrl_num);
+u32 fsl_ddr_get_intl3r(void);
/*
* The 85xx boards have a common prototype for fixed_sdram so put the
diff --git a/arch/powerpc/include/asm/fsl_fman.h b/arch/powerpc/include/asm/fsl_fman.h
index 2c0c9bc..299daca 100644
--- a/arch/powerpc/include/asm/fsl_fman.h
+++ b/arch/powerpc/include/asm/fsl_fman.h
@@ -423,6 +423,14 @@ typedef struct fm_10gec_mdio {
u8 res[4*1024];
} fm_10gec_mdio_t;
+typedef struct fm_memac {
+ u8 res[4*1024];
+} fm_memac_t;
+
+typedef struct fm_memac_mdio {
+ u8 res[4*1024];
+} fm_memac_mdio_t;
+
typedef struct fm_1588 {
u8 res[4*1024];
} fm_1588_t;
@@ -446,6 +454,14 @@ typedef struct ccsr_fman {
u8 res1[8*1024];
fm_soft_parser_t fm_soft_parser;
u8 res2[96*1024];
+#ifdef CONFIG_SYS_FMAN_V3
+ struct {
+ fm_memac_t fm_memac;
+ fm_memac_mdio_t fm_memac_mdio;
+ } memac[10];
+ u8 res4[32*1024];
+ fm_memac_mdio_t fm_dedicated_mdio[2];
+#else
struct {
fm_dtsec_t fm_dtesc;
fm_mdio_t fm_mdio;
@@ -455,6 +471,7 @@ typedef struct ccsr_fman {
fm_10gec_mdio_t fm_10gec_mdio;
} mac_10g[1];
u8 res4[48*1024];
+#endif
fm_1588_t fm_1588;
u8 res5[4*1024];
} ccsr_fman_t;
diff --git a/arch/powerpc/include/asm/fsl_liodn.h b/arch/powerpc/include/asm/fsl_liodn.h
index a9973b8..d759de9 100644
--- a/arch/powerpc/include/asm/fsl_liodn.h
+++ b/arch/powerpc/include/asm/fsl_liodn.h
@@ -94,6 +94,11 @@ extern void fdt_fixup_liodn(void *blob);
SET_GUTS_LIODN(compat, liodn, pex##pciNum##liodnr,\
CONFIG_SYS_MPC85xx_PCIE##pciNum##_OFFSET)
+#define SET_PCI_LIODN_BASE(compat, pciNum, liodn) \
+ SET_LIODN_ENTRY_1(compat, liodn,\
+ offsetof(ccsr_pcix_t, liodn_base) + CONFIG_SYS_MPC85xx_PCIE##pciNum##_OFFSET,\
+ CONFIG_SYS_MPC85xx_PCIE##pciNum##_OFFSET)
+
/* reg nodes for DMA start @ 0x300 */
#define SET_DMA_LIODN(dmaNum, liodn) \
SET_GUTS_LIODN("fsl,eloplus-dma", liodn, dma##dmaNum##liodnr,\
@@ -118,6 +123,12 @@ extern void fdt_fixup_liodn(void *blob);
CONFIG_SYS_FSL_CORENET_PME_OFFSET, \
CONFIG_SYS_FSL_CORENET_PME_OFFSET)
+#define SET_PMAN_LIODN(num, liodn) \
+ SET_LIODN_ENTRY_2("fsl,pman", liodn, 0, \
+ offsetof(struct ccsr_pman, ppa1) + \
+ CONFIG_SYS_FSL_CORENET_PMAN##num##_OFFSET, \
+ CONFIG_SYS_FSL_CORENET_PMAN##num##_OFFSET)
+
/* -1 from portID due to how immap has the registers */
#define FM_PPID_RX_PORT_OFFSET(fmNum, portID) \
CONFIG_SYS_FSL_FM##fmNum##_OFFSET + \
@@ -184,11 +195,13 @@ extern void fdt_fixup_liodn(void *blob);
extern struct liodn_id_table liodn_tbl[], liodn_bases[], sec_liodn_tbl[];
extern struct liodn_id_table raide_liodn_tbl[];
extern struct liodn_id_table fman1_liodn_tbl[], fman2_liodn_tbl[];
+#ifdef CONFIG_SYS_SRIO
extern struct srio_liodn_id_table srio_liodn_tbl[];
+extern int srio_liodn_tbl_sz;
+#endif
extern struct liodn_id_table rman_liodn_tbl[];
extern int liodn_tbl_sz, sec_liodn_tbl_sz, raide_liodn_tbl_sz;
extern int fman1_liodn_tbl_sz, fman2_liodn_tbl_sz;
-extern int srio_liodn_tbl_sz;
extern int rman_liodn_tbl_sz;
#endif
diff --git a/arch/powerpc/include/asm/fsl_memac.h b/arch/powerpc/include/asm/fsl_memac.h
new file mode 100644
index 0000000..d6b60e6
--- /dev/null
+++ b/arch/powerpc/include/asm/fsl_memac.h
@@ -0,0 +1,271 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Roy Zang <tie-fei.zang@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __MEMAC_H__
+#define __MEMAC_H__
+
+#include <phy.h>
+
+struct memac {
+ /* memac general control and status registers */
+ u32 res_0[2];
+ u32 command_config; /* Control and configuration register */
+ u32 mac_addr_0; /* Lower 32 bits of 48-bit MAC address */
+ u32 mac_addr_1; /* Upper 16 bits of 48-bit MAC address */
+ u32 maxfrm; /* Maximum frame length register */
+ u32 res_18[5];
+ u32 hashtable_ctrl; /* Hash table control register */
+ u32 res_30[4];
+ u32 ievent; /* Interrupt event register */
+ u32 tx_ipg_length; /* Transmitter inter-packet-gap register */
+ u32 res_48;
+ u32 imask; /* interrupt mask register */
+ u32 res_50;
+ u32 cl_pause_quanta[4]; /* CL01-CL67 pause quanta register */
+ u32 cl_pause_thresh[4]; /* CL01-CL67 pause thresh register */
+ u32 rx_pause_status; /* Receive pause status register */
+ u32 res_78[2];
+ u32 mac_addr[14]; /* MAC address */
+ u32 lpwake_timer; /* EEE low power wakeup timer register */
+ u32 sleep_timer; /* Transmit EEE Low Power Timer register */
+ u32 res_c0[8];
+ u32 statn_config; /* Statistics configuration register */
+ u32 res_e4[7];
+
+ /* memac statistics counter registers */
+ u32 rx_eoct_l; /* Rx ethernet octests lower */
+ u32 rx_eoct_u; /* Rx ethernet octests upper */
+ u32 rx_oct_l; /* Rx octests lower */
+ u32 rx_oct_u; /* Rx octests upper */
+ u32 rx_align_err_l; /* Rx alignment error lower */
+ u32 rx_align_err_u; /* Rx alignment error upper */
+ u32 rx_pause_frame_l; /* Rx valid pause frame upper */
+ u32 rx_pause_frame_u; /* Rx valid pause frame upper */
+ u32 rx_frame_l; /* Rx frame counter lower */
+ u32 rx_frame_u; /* Rx frame counter upper */
+ u32 rx_frame_crc_err_l; /* Rx frame check sequence error lower */
+ u32 rx_frame_crc_err_u; /* Rx frame check sequence error upper */
+ u32 rx_vlan_l; /* Rx VLAN frame lower */
+ u32 rx_vlan_u; /* Rx VLAN frame upper */
+ u32 rx_err_l; /* Rx frame error lower */
+ u32 rx_err_u; /* Rx frame error upper */
+ u32 rx_uni_l; /* Rx unicast frame lower */
+ u32 rx_uni_u; /* Rx unicast frame upper */
+ u32 rx_multi_l; /* Rx multicast frame lower */
+ u32 rx_multi_u; /* Rx multicast frame upper */
+ u32 rx_brd_l; /* Rx broadcast frame lower */
+ u32 rx_brd_u; /* Rx broadcast frame upper */
+ u32 rx_drop_l; /* Rx dropped packets lower */
+ u32 rx_drop_u; /* Rx dropped packets upper */
+ u32 rx_pkt_l; /* Rx packets lower */
+ u32 rx_pkt_u; /* Rx packets upper */
+ u32 rx_undsz_l; /* Rx undersized packet lower */
+ u32 rx_undsz_u; /* Rx undersized packet upper */
+ u32 rx_64_l; /* Rx 64 oct packet lower */
+ u32 rx_64_u; /* Rx 64 oct packet upper */
+ u32 rx_127_l; /* Rx 65 to 127 oct packet lower */
+ u32 rx_127_u; /* Rx 65 to 127 oct packet upper */
+ u32 rx_255_l; /* Rx 128 to 255 oct packet lower */
+ u32 rx_255_u; /* Rx 128 to 255 oct packet upper */
+ u32 rx_511_l; /* Rx 256 to 511 oct packet lower */
+ u32 rx_511_u; /* Rx 256 to 511 oct packet upper */
+ u32 rx_1023_l; /* Rx 512 to 1023 oct packet lower */
+ u32 rx_1023_u; /* Rx 512 to 1023 oct packet upper */
+ u32 rx_1518_l; /* Rx 1024 to 1518 oct packet lower */
+ u32 rx_1518_u; /* Rx 1024 to 1518 oct packet upper */
+ u32 rx_1519_l; /* Rx 1519 to max oct packet lower */
+ u32 rx_1519_u; /* Rx 1519 to max oct packet upper */
+ u32 rx_oversz_l; /* Rx oversized packet lower */
+ u32 rx_oversz_u; /* Rx oversized packet upper */
+ u32 rx_jabber_l; /* Rx Jabber packet lower */
+ u32 rx_jabber_u; /* Rx Jabber packet upper */
+ u32 rx_frag_l; /* Rx Fragment packet lower */
+ u32 rx_frag_u; /* Rx Fragment packet upper */
+ u32 rx_cnp_l; /* Rx control packet lower */
+ u32 rx_cnp_u; /* Rx control packet upper */
+ u32 rx_drntp_l; /* Rx dripped not truncated packet lower */
+ u32 rx_drntp_u; /* Rx dripped not truncated packet upper */
+ u32 res_1d0[0xc];
+
+ u32 tx_eoct_l; /* Tx ethernet octests lower */
+ u32 tx_eoct_u; /* Tx ethernet octests upper */
+ u32 tx_oct_l; /* Tx octests lower */
+ u32 tx_oct_u; /* Tx octests upper */
+ u32 res_210[0x2];
+ u32 tx_pause_frame_l; /* Tx valid pause frame lower */
+ u32 tx_pause_frame_u; /* Tx valid pause frame upper */
+ u32 tx_frame_l; /* Tx frame counter lower */
+ u32 tx_frame_u; /* Tx frame counter upper */
+ u32 tx_frame_crc_err_l; /* Tx frame check sequence error lower */
+ u32 tx_frame_crc_err_u; /* Tx frame check sequence error upper */
+ u32 tx_vlan_l; /* Tx VLAN frame lower */
+ u32 tx_vlan_u; /* Tx VLAN frame upper */
+ u32 tx_frame_err_l; /* Tx frame error lower */
+ u32 tx_frame_err_u; /* Tx frame error upper */
+ u32 tx_uni_l; /* Tx unicast frame lower */
+ u32 tx_uni_u; /* Tx unicast frame upper */
+ u32 tx_multi_l; /* Tx multicast frame lower */
+ u32 tx_multi_u; /* Tx multicast frame upper */
+ u32 tx_brd_l; /* Tx broadcast frame lower */
+ u32 tx_brd_u; /* Tx broadcast frame upper */
+ u32 res_258[0x2];
+ u32 tx_pkt_l; /* Tx packets lower */
+ u32 tx_pkt_u; /* Tx packets upper */
+ u32 tx_undsz_l; /* Tx undersized packet lower */
+ u32 tx_undsz_u; /* Tx undersized packet upper */
+ u32 tx_64_l; /* Tx 64 oct packet lower */
+ u32 tx_64_u; /* Tx 64 oct packet upper */
+ u32 tx_127_l; /* Tx 65 to 127 oct packet lower */
+ u32 tx_127_u; /* Tx 65 to 127 oct packet upper */
+ u32 tx_255_l; /* Tx 128 to 255 oct packet lower */
+ u32 tx_255_u; /* Tx 128 to 255 oct packet upper */
+ u32 tx_511_l; /* Tx 256 to 511 oct packet lower */
+ u32 tx_511_u; /* Tx 256 to 511 oct packet upper */
+ u32 tx_1023_l; /* Tx 512 to 1023 oct packet lower */
+ u32 tx_1023_u; /* Tx 512 to 1023 oct packet upper */
+ u32 tx_1518_l; /* Tx 1024 to 1518 oct packet lower */
+ u32 tx_1518_u; /* Tx 1024 to 1518 oct packet upper */
+ u32 tx_1519_l; /* Tx 1519 to max oct packet lower */
+ u32 tx_1519_u; /* Tx 1519 to max oct packet upper */
+ u32 res_2a8[0x6];
+ u32 tx_cnp_l; /* Tx control packet lower */
+ u32 tx_cnp_u; /* Tx control packet upper */
+ u32 res_2c8[0xe];
+
+ /* Line interface control register */
+ u32 if_mode; /* interface mode control */
+ u32 if_status; /* interface status */
+ u32 res_308[0xe];
+
+ /* HiGig/2 Register */
+ u32 hg_config; /* HiGig2 control and configuration */
+ u32 res_344[0x3];
+ u32 hg_pause_quanta; /* HiGig2 pause quanta */
+ u32 res_354[0x3];
+ u32 hg_pause_thresh; /* HiGig2 pause quanta threshold */
+ u32 res_364[0x3];
+ u32 hgrx_pause_status; /* HiGig2 rx pause quanta status */
+ u32 hg_fifos_status; /* HiGig2 fifos status */
+ u32 rhm; /* Rx HiGig2 message counter register */
+ u32 thm;/* Tx HiGig2 message counter register */
+ u32 res_380[0x320];
+};
+
+/* COMMAND_CONFIG - command and configuration register */
+#define MEMAC_CMD_CFG_RX_EN 0x00000002 /* MAC Rx path enable */
+#define MEMAC_CMD_CFG_TX_EN 0x00000001 /* MAC Tx path enable */
+#define MEMAC_CMD_CFG_RXTX_EN (MEMAC_CMD_CFG_RX_EN | MEMAC_CMD_CFG_TX_EN)
+
+/* HASHTABLE_CTRL - Hashtable control register */
+#define HASHTABLE_CTRL_MCAST_EN 0x00000200 /* enable mulitcast Rx hash */
+#define HASHTABLE_CTRL_ADDR_MASK 0x000001ff
+
+/* TX_IPG_LENGTH - Transmit inter-packet gap length register */
+#define TX_IPG_LENGTH_IPG_LEN_MASK 0x000003ff
+
+/* IMASK - interrupt mask register */
+#define IMASK_MDIO_SCAN_EVENT 0x00010000 /* MDIO scan event mask */
+#define IMASK_MDIO_CMD_CMPL 0x00008000 /* MDIO cmd completion mask */
+#define IMASK_REM_FAULT 0x00004000 /* remote fault mask */
+#define IMASK_LOC_FAULT 0x00002000 /* local fault mask */
+#define IMASK_TX_ECC_ER 0x00001000 /* Tx frame ECC error mask */
+#define IMASK_TX_FIFO_UNFL 0x00000800 /* Tx FIFO underflow mask */
+#define IMASK_TX_ER 0x00000200 /* Tx frame error mask */
+#define IMASK_RX_FIFO_OVFL 0x00000100 /* Rx FIFO overflow mask */
+#define IMASK_RX_ECC_ER 0x00000080 /* Rx frame ECC error mask */
+#define IMASK_RX_JAB_FRM 0x00000040 /* Rx jabber frame mask */
+#define IMASK_RX_OVRSZ_FRM 0x00000020 /* Rx oversized frame mask */
+#define IMASK_RX_RUNT_FRM 0x00000010 /* Rx runt frame mask */
+#define IMASK_RX_FRAG_FRM 0x00000008 /* Rx fragment frame mask */
+#define IMASK_RX_LEN_ER 0x00000004 /* Rx payload length error mask */
+#define IMASK_RX_CRC_ER 0x00000002 /* Rx CRC error mask */
+#define IMASK_RX_ALIGN_ER 0x00000001 /* Rx alignment error mask */
+
+#define IMASK_MASK_ALL 0x00000000
+
+/* IEVENT - interrupt event register */
+#define IEVENT_MDIO_SCAN_EVENT 0x00010000 /* MDIO scan event */
+#define IEVENT_MDIO_CMD_CMPL 0x00008000 /* MDIO cmd completion */
+#define IEVENT_REM_FAULT 0x00004000 /* remote fault */
+#define IEVENT_LOC_FAULT 0x00002000 /* local fault */
+#define IEVENT_TX_ECC_ER 0x00001000 /* Tx frame ECC error */
+#define IEVENT_TX_FIFO_UNFL 0x00000800 /* Tx FIFO underflow */
+#define IEVENT_TX_ER 0x00000200 /* Tx frame error */
+#define IEVENT_RX_FIFO_OVFL 0x00000100 /* Rx FIFO overflow */
+#define IEVENT_RX_ECC_ER 0x00000080 /* Rx frame ECC error */
+#define IEVENT_RX_JAB_FRM 0x00000040 /* Rx jabber frame */
+#define IEVENT_RX_OVRSZ_FRM 0x00000020 /* Rx oversized frame */
+#define IEVENT_RX_RUNT_FRM 0x00000010 /* Rx runt frame */
+#define IEVENT_RX_FRAG_FRM 0x00000008 /* Rx fragment frame */
+#define IEVENT_RX_LEN_ER 0x00000004 /* Rx payload length error */
+#define IEVENT_RX_CRC_ER 0x00000002 /* Rx CRC error */
+#define IEVENT_RX_ALIGN_ER 0x00000001 /* Rx alignment error */
+
+#define IEVENT_CLEAR_ALL 0xffffffff
+
+/* IF_MODE - Interface Mode Register */
+#define IF_MODE_EN_AUTO 0x00008000 /* 1 - Enable automatic speed selection */
+#define IF_MODE_XGMII 0x00000000 /* 00- XGMII(10) interface mode */
+#define IF_MODE_GMII 0x00000002 /* 10- GMII interface mode */
+#define IF_MODE_MASK 0x00000003 /* mask for mode interface mode */
+#define IF_MODE_RG 0x00000004 /* 1- RGMII */
+#define IF_MODE_RM 0x00000008 /* 1- RGMII */
+
+#define IF_DEFAULT (IF_GMII)
+
+/* Internal PHY Registers - SGMII */
+#define PHY_SGMII_CR_PHY_RESET 0x8000
+#define PHY_SGMII_CR_RESET_AN 0x0200
+#define PHY_SGMII_CR_DEF_VAL 0x1140
+#define PHY_SGMII_DEV_ABILITY_SGMII 0x4001
+#define PHY_SGMII_IF_MODE_AN 0x0002
+#define PHY_SGMII_IF_MODE_SGMII 0x0001
+
+struct memac_mdio_controller {
+ u32 res0[0xc];
+ u32 mdio_stat; /* MDIO configuration and status */
+ u32 mdio_ctl; /* MDIO control */
+ u32 mdio_data; /* MDIO data */
+ u32 mdio_addr; /* MDIO address */
+};
+
+#define MDIO_STAT_CLKDIV(x) (((x>>1) & 0xff) << 8)
+#define MDIO_STAT_BSY (1 << 0)
+#define MDIO_STAT_RD_ER (1 << 1)
+#define MDIO_STAT_PRE (1 << 5)
+#define MDIO_STAT_ENC (1 << 6)
+#define MDIO_STAT_HOLD_15_CLK (7 << 2)
+
+#define MDIO_CTL_DEV_ADDR(x) (x & 0x1f)
+#define MDIO_CTL_PORT_ADDR(x) ((x & 0x1f) << 5)
+#define MDIO_CTL_PRE_DIS (1 << 10)
+#define MDIO_CTL_SCAN_EN (1 << 11)
+#define MDIO_CTL_POST_INC (1 << 14)
+#define MDIO_CTL_READ (1 << 15)
+
+#define MDIO_DATA(x) (x & 0xffff)
+#define MDIO_DATA_BSY (1 << 31)
+
+struct fsl_enet_mac;
+
+void init_memac(struct fsl_enet_mac *mac, void *base, void *phyregs,
+ int max_rx_len);
+
+#endif
diff --git a/arch/powerpc/include/asm/fsl_portals.h b/arch/powerpc/include/asm/fsl_portals.h
index 5644044..b75f5b9 100644
--- a/arch/powerpc/include/asm/fsl_portals.h
+++ b/arch/powerpc/include/asm/fsl_portals.h
@@ -32,15 +32,16 @@ enum fsl_dpaa_dev {
FSL_HW_PORTAL_FMAN2,
#endif
#endif
-#ifdef CONFIG_SYS_DPAA_PME
FSL_HW_PORTAL_PME,
-#endif
#ifdef CONFIG_SYS_FSL_RAID_ENGINE
FSL_HW_PORTAL_RAID_ENGINE,
#endif
#ifdef CONFIG_SYS_DPAA_RMAN
FSL_HW_PORTAL_RMAN,
#endif
+#ifdef CONFIG_SYS_DPAA_DCE
+ FSL_HW_PORTAL_DCE,
+#endif
};
diff --git a/arch/powerpc/include/asm/fsl_serdes.h b/arch/powerpc/include/asm/fsl_serdes.h
index 22525f1..6cd7379 100644
--- a/arch/powerpc/include/asm/fsl_serdes.h
+++ b/arch/powerpc/include/asm/fsl_serdes.h
@@ -37,11 +37,17 @@ enum srds_prtcl {
SGMII_FM1_DTSEC3,
SGMII_FM1_DTSEC4,
SGMII_FM1_DTSEC5,
+ SGMII_FM1_DTSEC6,
+ SGMII_FM1_DTSEC9,
+ SGMII_FM1_DTSEC10,
SGMII_FM2_DTSEC1,
SGMII_FM2_DTSEC2,
SGMII_FM2_DTSEC3,
SGMII_FM2_DTSEC4,
SGMII_FM2_DTSEC5,
+ SGMII_FM2_DTSEC6,
+ SGMII_FM2_DTSEC9,
+ SGMII_FM2_DTSEC10,
SGMII_TSEC1,
SGMII_TSEC2,
SGMII_TSEC3,
@@ -49,13 +55,49 @@ enum srds_prtcl {
XAUI_FM1,
XAUI_FM2,
AURORA,
+ CPRI1,
+ CPRI2,
+ CPRI3,
+ CPRI4,
+ CPRI5,
+ CPRI6,
+ CPRI7,
+ CPRI8,
+ XAUI_FM1_MAC9,
+ XAUI_FM1_MAC10,
+ XAUI_FM2_MAC9,
+ XAUI_FM2_MAC10,
+ HIGIG_FM1_MAC9,
+ HIGIG_FM1_MAC10,
+ HIGIG_FM2_MAC9,
+ HIGIG_FM2_MAC10,
+ QSGMII_FM1_A, /* A indicates MACs 1-4 */
+ QSGMII_FM1_B, /* B indicates MACs 5,6,9,10 */
+ QSGMII_FM2_A,
+ QSGMII_FM2_B,
+ XFI_FM1_MAC9,
+ XFI_FM1_MAC10,
+ XFI_FM2_MAC9,
+ XFI_FM2_MAC10,
+ INTERLAKEN,
+};
+
+enum srds {
+ FSL_SRDS_1 = 0,
+ FSL_SRDS_2 = 1,
+ FSL_SRDS_3 = 2,
+ FSL_SRDS_4 = 3,
};
int is_serdes_configured(enum srds_prtcl device);
void fsl_serdes_init(void);
#ifdef CONFIG_FSL_CORENET
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+int serdes_get_first_lane(u32 sd, enum srds_prtcl device);
+#else
int serdes_get_first_lane(enum srds_prtcl device);
+#endif
#ifdef CONFIG_SYS_P4080_ERRATUM_SERDES9
void serdes_reset_rx(enum srds_prtcl device);
#endif
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 7de33a7..969f726 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -296,7 +296,9 @@ typedef struct ccsr_pcix {
u32 cfg_addr; /* PCIX Configuration Addr */
u32 cfg_data; /* PCIX Configuration Data */
u32 int_ack; /* PCIX IRQ Acknowledge */
- u8 res1[3060];
+ u8 res000c[52];
+ u32 liodn_base; /* PCIX LIODN base register */
+ u8 res0044[3004];
u32 potar0; /* PCIX Outbound Transaction Addr 0 */
u32 potear0; /* PCIX Outbound Translation Extended Addr 0 */
u32 powbar0; /* PCIX Outbound Window Base Addr 0 */
@@ -1687,6 +1689,77 @@ typedef struct ccsr_gur {
u32 alt_pmuxcr; /* Alt function signal multiplex control */
u8 res6[12];
u32 devdisr; /* Device disable control */
+ u32 devdisr2; /* Device disable control 2 */
+ u32 devdisr3; /* Device disable control 3 */
+ u32 devdisr4; /* Device disable control 4 */
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+ u32 devdisr5; /* Device disable control 5 */
+#define FSL_CORENET_DEVDISR_PBL 0x80000000
+#define FSL_CORENET_DEVDISR_PMAN 0x40000000
+#define FSL_CORENET_DEVDISR_ESDHC 0x20000000
+#define FSL_CORENET_DEVDISR_DMA1 0x00800000
+#define FSL_CORENET_DEVDISR_DMA2 0x00400000
+#define FSL_CORENET_DEVDISR_USB1 0x00080000
+#define FSL_CORENET_DEVDISR_USB2 0x00040000
+#define FSL_CORENET_DEVDISR_SATA1 0x00008000
+#define FSL_CORENET_DEVDISR_SATA2 0x00004000
+#define FSL_CORENET_DEVDISR_PME 0x00000800
+#define FSL_CORENET_DEVDISR_SEC 0x00000200
+#define FSL_CORENET_DEVDISR_RMU 0x00000080
+#define FSL_CORENET_DEVDISR_DCE 0x00000040
+#define FSL_CORENET_DEVDISR2_DTSEC1_1 0x80000000
+#define FSL_CORENET_DEVDISR2_DTSEC1_2 0x40000000
+#define FSL_CORENET_DEVDISR2_DTSEC1_3 0x20000000
+#define FSL_CORENET_DEVDISR2_DTSEC1_4 0x10000000
+#define FSL_CORENET_DEVDISR2_DTSEC1_5 0x08000000
+#define FSL_CORENET_DEVDISR2_DTSEC1_6 0x04000000
+#define FSL_CORENET_DEVDISR2_DTSEC1_9 0x00800000
+#define FSL_CORENET_DEVDISR2_DTSEC1_10 0x00400000
+#define FSL_CORENET_DEVDISR2_10GEC1_1 0x00800000
+#define FSL_CORENET_DEVDISR2_10GEC1_2 0x00400000
+#define FSL_CORENET_DEVDISR2_DTSEC2_1 0x00080000
+#define FSL_CORENET_DEVDISR2_DTSEC2_2 0x00040000
+#define FSL_CORENET_DEVDISR2_DTSEC2_3 0x00020000
+#define FSL_CORENET_DEVDISR2_DTSEC2_4 0x00010000
+#define FSL_CORENET_DEVDISR2_DTSEC2_5 0x00008000
+#define FSL_CORENET_DEVDISR2_DTSEC2_6 0x00004000
+#define FSL_CORENET_DEVDISR2_DTSEC2_9 0x00000800
+#define FSL_CORENET_DEVDISR2_DTSEC2_10 0x00000400
+#define FSL_CORENET_DEVDISR2_10GEC2_1 0x00000800
+#define FSL_CORENET_DEVDISR2_10GEC2_2 0x00000400
+#define FSL_CORENET_DEVDISR2_FM1 0x00000080
+#define FSL_CORENET_DEVDISR2_FM2 0x00000040
+#define FSL_CORENET_DEVDISR2_CPRI 0x00000008
+#define FSL_CORENET_DEVDISR3_PCIE1 0x80000000
+#define FSL_CORENET_DEVDISR3_PCIE2 0x40000000
+#define FSL_CORENET_DEVDISR3_PCIE3 0x20000000
+#define FSL_CORENET_DEVDISR3_PCIE4 0x10000000
+#define FSL_CORENET_DEVDISR3_SRIO1 0x08000000
+#define FSL_CORENET_DEVDISR3_SRIO2 0x04000000
+#define FSL_CORENET_DEVDISR3_QMAN 0x00080000
+#define FSL_CORENET_DEVDISR3_BMAN 0x00040000
+#define FSL_CORENET_DEVDISR3_LA1 0x00008000
+#define FSL_CORENET_DEVDISR3_MAPLE1 0x00000800
+#define FSL_CORENET_DEVDISR3_MAPLE2 0x00000400
+#define FSL_CORENET_DEVDISR3_MAPLE3 0x00000200
+#define FSL_CORENET_DEVDISR4_I2C1 0x80000000
+#define FSL_CORENET_DEVDISR4_I2C2 0x40000000
+#define FSL_CORENET_DEVDISR4_DUART1 0x20000000
+#define FSL_CORENET_DEVDISR4_DUART2 0x10000000
+#define FSL_CORENET_DEVDISR4_ESPI 0x08000000
+#define FSL_CORENET_DEVDISR5_DDR1 0x80000000
+#define FSL_CORENET_DEVDISR5_DDR2 0x40000000
+#define FSL_CORENET_DEVDISR5_DDR3 0x20000000
+#define FSL_CORENET_DEVDISR5_CPC1 0x08000000
+#define FSL_CORENET_DEVDISR5_CPC2 0x04000000
+#define FSL_CORENET_DEVDISR5_CPC3 0x02000000
+#define FSL_CORENET_DEVDISR5_IFC 0x00800000
+#define FSL_CORENET_DEVDISR5_GPIO 0x00400000
+#define FSL_CORENET_DEVDISR5_DBG 0x00200000
+#define FSL_CORENET_DEVDISR5_NAL 0x00100000
+#define FSL_CORENET_DEVDISR5_TIMERS 0x00020000
+#define FSL_CORENET_NUM_DEVDISR 5
+#else
#define FSL_CORENET_DEVDISR_PCIE1 0x80000000
#define FSL_CORENET_DEVDISR_PCIE2 0x40000000
#define FSL_CORENET_DEVDISR_PCIE3 0x20000000
@@ -1712,7 +1785,6 @@ typedef struct ccsr_gur {
#define FSL_CORENET_DEVDISR_I2C2 0x00000010
#define FSL_CORENET_DEVDISR_DUART1 0x00000002
#define FSL_CORENET_DEVDISR_DUART2 0x00000001
- u32 devdisr2; /* Device disable control 2 */
#define FSL_CORENET_DEVDISR2_PME 0x80000000
#define FSL_CORENET_DEVDISR2_SEC 0x40000000
#define FSL_CORENET_DEVDISR2_QMBM 0x08000000
@@ -1731,8 +1803,8 @@ typedef struct ccsr_gur {
#define FSL_CORENET_DEVDISR2_DTSEC2_4 0x00001000
#define FSL_CORENET_DEVDISR2_DTSEC2_5 0x00000800
#define FSL_CORENET_NUM_DEVDISR 2
- u8 res7[8];
u32 powmgtcsr; /* Power management status & control */
+#endif
u8 res8[12];
u32 coredisru; /* uppper portion for support of 64 cores */
u32 coredisrl; /* lower portion for support of 64 cores */
@@ -1755,13 +1827,47 @@ typedef struct ccsr_gur {
u32 brrl; /* Boot release */
u8 res17[24];
u32 rcwsr[16]; /* Reset control word status */
+
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+#define FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT 16
+#define FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK 0x3f
+#if defined(CONFIG_PPC_T4240)
+#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL 0xfc000000
+#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT 26
+#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL 0x00fe0000
+#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT 17
+#define FSL_CORENET2_RCWSR4_SRDS3_PRTCL 0x0000f800
+#define FSL_CORENET2_RCWSR4_SRDS3_PRTCL_SHIFT 11
+#define FSL_CORENET2_RCWSR4_SRDS4_PRTCL 0x000000f8
+#define FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT 3
+#elif defined(CONFIG_PPC_B4860)
+#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL 0xfe000000
+#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT 25
+#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL 0x00ff0000
+#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT 16
+#endif
+#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S1_PLL1 0x00800000
+#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S1_PLL2 0x00400000
+#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S2_PLL1 0x00200000
+#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S2_PLL2 0x00100000
+#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S3_PLL1 0x00080000
+#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S3_PLL2 0x00040000
+#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S4_PLL1 0x00020000
+#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S4_PLL2 0x00010000
+
+#else /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
+#define FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT 17
+#define FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK 0x1f
#define FSL_CORENET_RCWSR4_SRDS_PRTCL 0xfc000000
#define FSL_CORENET_RCWSR5_DDR_SYNC 0x00000080
#define FSL_CORENET_RCWSR5_DDR_SYNC_SHIFT 7
#define FSL_CORENET_RCWSR5_SRDS_EN 0x00002000
+#define FSL_CORENET_RCWSR5_SRDS2_EN 0x00001000
#define FSL_CORENET_RCWSR6_BOOT_LOC 0x0f800000
#define FSL_CORENET_RCWSRn_SRDS_LPD_B2 0x3c000000 /* bits 162..165 */
#define FSL_CORENET_RCWSRn_SRDS_LPD_B3 0x003c0000 /* bits 170..173 */
+#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
+
#define FSL_CORENET_RCWSR7_MCK_TO_PLAT_RAT 0x00400000
#define FSL_CORENET_RCWSR8_HOST_AGT_B1 0x00e00000
#define FSL_CORENET_RCWSR8_HOST_AGT_B2 0x00100000
@@ -1784,6 +1890,24 @@ typedef struct ccsr_gur {
#define FSL_CORENET_RCWSR11_EC2_FM1_DTSEC5_MII 0x00100000
#define FSL_CORENET_RCWSR11_EC2_FM1_DTSEC5_NONE 0x00180000
#endif
+#if defined(CONFIG_PPC_P5040)
+#define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC5_RGMII 0x00000000
+#define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC5_MII 0x00800000
+#define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC5_NONE 0x00c00000
+#define FSL_CORENET_RCWSR11_EC2 0x00180000 /* bits 363..364 */
+#define FSL_CORENET_RCWSR11_EC2_FM2_DTSEC5_RGMII 0x00000000
+#define FSL_CORENET_RCWSR11_EC2_FM2_DTSEC5_MII 0x00100000
+#define FSL_CORENET_RCWSR11_EC2_FM2_DTSEC5_NONE 0x00180000
+#endif
+#if defined(CONFIG_PPC_T4240)
+#define FSL_CORENET_RCWSR13_EC1 0x60000000 /* bits 417..418 */
+#define FSL_CORENET_RCWSR13_EC1_FM2_DTSEC5_RGMII 0x00000000
+#define FSL_CORENET_RCWSR13_EC1_FM2_GPIO 0x40000000
+#define FSL_CORENET_RCWSR13_EC2 0x18000000 /* bits 419..420 */
+#define FSL_CORENET_RCWSR13_EC2_FM1_DTSEC5_RGMII 0x00000000
+#define FSL_CORENET_RCWSR13_EC2_FM1_DTSEC6_RGMII 0x08000000
+#define FSL_CORENET_RCWSR13_EC2_FM1_GPIO 0x10000000
+#endif
u8 res18[192];
u32 scratchrw[4]; /* Scratch Read/Write */
u8 res19[240];
@@ -1880,34 +2004,38 @@ typedef struct ccsr_gur {
#define rmuliodnr rio1maintliodnr
typedef struct ccsr_clk {
- u32 clkc0csr; /* Core 0 Clock control/status */
+ u32 clkc0csr; /* 0x000 Core 0 Clock control/status */
u8 res1[0x1c];
- u32 clkc1csr; /* Core 1 Clock control/status */
+ u32 clkc1csr; /* 0x020 Core 1 Clock control/status */
u8 res2[0x1c];
- u32 clkc2csr; /* Core 2 Clock control/status */
+ u32 clkc2csr; /* 0x040 Core 2 Clock control/status */
u8 res3[0x1c];
- u32 clkc3csr; /* Core 3 Clock control/status */
+ u32 clkc3csr; /* 0x060 Core 3 Clock control/status */
u8 res4[0x1c];
- u32 clkc4csr; /* Core 4 Clock control/status */
+ u32 clkc4csr; /* 0x080 Core 4 Clock control/status */
u8 res5[0x1c];
- u32 clkc5csr; /* Core 5 Clock control/status */
+ u32 clkc5csr; /* 0x0a0 Core 5 Clock control/status */
u8 res6[0x1c];
- u32 clkc6csr; /* Core 6 Clock control/status */
+ u32 clkc6csr; /* 0x0c0 Core 6 Clock control/status */
u8 res7[0x1c];
- u32 clkc7csr; /* Core 7 Clock control/status */
+ u32 clkc7csr; /* 0x0e0 Core 7 Clock control/status */
u8 res8[0x71c];
- u32 pllc1gsr; /* Cluster PLL 1 General Status */
+ u32 pllc1gsr; /* 0x800 Cluster PLL 1 General Status */
u8 res10[0x1c];
- u32 pllc2gsr; /* Cluster PLL 2 General Status */
+ u32 pllc2gsr; /* 0x820 Cluster PLL 2 General Status */
u8 res11[0x1c];
- u32 pllc3gsr; /* Cluster PLL 3 General Status */
+ u32 pllc3gsr; /* 0x840 Cluster PLL 3 General Status */
u8 res12[0x1c];
- u32 pllc4gsr; /* Cluster PLL 4 General Status */
- u8 res13[0x39c];
- u32 pllpgsr; /* Platform PLL General Status */
+ u32 pllc4gsr; /* 0x860 Cluster PLL 4 General Status */
+ u8 res13[0x1c];
+ u32 pllc5gsr; /* 0x880 Cluster PLL 5 General Status */
u8 res14[0x1c];
- u32 plldgsr; /* DDR PLL General Status */
- u8 res15[0x3dc];
+ u32 pllc6gsr; /* 0x8a0 Cluster PLL 6 General Status */
+ u8 res15[0x35c];
+ u32 pllpgsr; /* 0xc00 Platform PLL General Status */
+ u8 res16[0x1c];
+ u32 plldgsr; /* 0xc20 DDR PLL General Status */
+ u8 res17[0x3dc];
} ccsr_clk_t;
#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
@@ -2384,6 +2512,78 @@ typedef struct ccsr_gur {
#define SDHCDCR_CD_INV 0x80000000 /* invert SDHC card detect */
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+#define MAX_SERDES 4
+#define SRDS_MAX_LANES 8
+#define SRDS_MAX_BANK 2
+typedef struct serdes_corenet {
+ struct {
+ u32 rstctl; /* Reset Control Register */
+#define SRDS_RSTCTL_RST 0x80000000
+#define SRDS_RSTCTL_RSTDONE 0x40000000
+#define SRDS_RSTCTL_RSTERR 0x20000000
+#define SRDS_RSTCTL_SWRST 0x10000000
+#define SRDS_RSTCTL_SDPD 0x00000020
+ u32 pllcr0; /* PLL Control Register 0 */
+#define SRDS_PLLCR0_POFF 0x80000000
+#define SRDS_PLLCR0_RFCK_SEL_MASK 0x70000000
+#define SRDS_PLLCR0_RFCK_SEL_100 0x00000000
+#define SRDS_PLLCR0_RFCK_SEL_125 0x10000000
+#define SRDS_PLLCR0_RFCK_SEL_156_25 0x20000000
+#define SRDS_PLLCR0_RFCK_SEL_150 0x30000000
+#define SRDS_PLLCR0_RFCK_SEL_161_13 0x40000000
+#define SRDS_PLLCR0_RFCK_SEL_122_88 0x50000000
+#define SRDS_PLLCR0_FRATE_SEL_MASK 0x000f0000
+#define SRDS_PLLCR0_FRATE_SEL_5 0x00000000
+#define SRDS_PLLCR0_FRATE_SEL_3_75 0x00050000
+#define SRDS_PLLCR0_FRATE_SEL_5_15 0x00060000
+#define SRDS_PLLCR0_FRATE_SEL_4 0x00070000
+#define SRDS_PLLCR0_FRATE_SEL_3_12 0x00090000
+#define SRDS_PLLCR0_FRATE_SEL_3 0x000a0000
+ u32 pllcr1; /* PLL Control Register 1 */
+#define SRDS_PLLCR1_PLL_BWSEL 0x08000000
+ u32 res_0c; /* 0x00c */
+ u32 pllcr3;
+ u32 pllcr4;
+ u8 res_18[0x20-0x18];
+ } bank[2];
+ u8 res_40[0x90-0x40];
+ u32 srdstcalcr; /* 0x90 TX Calibration Control */
+ u8 res_94[0xa0-0x94];
+ u32 srdsrcalcr; /* 0xa0 RX Calibration Control */
+ u8 res_a4[0xb0-0xa4];
+ u32 srdsgr0; /* 0xb0 General Register 0 */
+ u8 res_b4[0xe0-0xb4];
+ u32 srdspccr0; /* 0xe0 Protocol Converter Config 0 */
+ u32 srdspccr1; /* 0xe4 Protocol Converter Config 1 */
+ u32 srdspccr2; /* 0xe8 Protocol Converter Config 2 */
+ u32 srdspccr3; /* 0xec Protocol Converter Config 3 */
+ u32 srdspccr4; /* 0xf0 Protocol Converter Config 4 */
+ u8 res_f4[0x100-0xf4];
+ struct {
+ u32 lnpssr; /* 0x100, 0x120, ..., 0x1e0 */
+ u8 res_104[0x120-0x104];
+ } srdslnpssr[8];
+ u8 res_200[0x800-0x200];
+ struct {
+ u32 gcr0; /* 0x800 General Control Register 0 */
+ u32 gcr1; /* 0x804 General Control Register 1 */
+ u32 gcr2; /* 0x808 General Control Register 2 */
+ u32 res_80c;
+ u32 recr0; /* 0x810 Receive Equalization Control */
+ u32 res_814;
+ u32 tecr0; /* 0x818 Transmit Equalization Control */
+ u32 res_81c;
+ u32 ttlcr0; /* 0x820 Transition Tracking Loop Ctrl 0 */
+ u8 res_824[0x840-0x824];
+ } lane[8]; /* Lane A, B, C, D, E, F, G, H */
+ u8 res_a00[0x1000-0xa00]; /* from 0xa00 to 0xfff */
+} serdes_corenet_t;
+
+#else /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
+
+#define SRDS_MAX_LANES 18
+#define SRDS_MAX_BANK 3
typedef struct serdes_corenet {
struct {
u32 rstctl; /* Reset Control Register */
@@ -2392,11 +2592,13 @@ typedef struct serdes_corenet {
#define SRDS_RSTCTL_RSTERR 0x20000000
#define SRDS_RSTCTL_SDPD 0x00000020
u32 pllcr0; /* PLL Control Register 0 */
-#define SRDS_PLLCR0_RFCK_SEL_MASK 0x30000000
+#define SRDS_PLLCR0_RFCK_SEL_MASK 0x70000000
+#define SRDS_PLLCR0_PVCOCNT_EN 0x02000000
#define SRDS_PLLCR0_RFCK_SEL_100 0x00000000
#define SRDS_PLLCR0_RFCK_SEL_125 0x10000000
#define SRDS_PLLCR0_RFCK_SEL_156_25 0x20000000
#define SRDS_PLLCR0_RFCK_SEL_150 0x30000000
+#define SRDS_PLLCR0_RFCK_SEL_161_13 0x40000000
#define SRDS_PLLCR0_FRATE_SEL_MASK 0x00030000
#define SRDS_PLLCR0_FRATE_SEL_5 0x00000000
#define SRDS_PLLCR0_FRATE_SEL_6_25 0x00010000
@@ -2421,6 +2623,7 @@ typedef struct serdes_corenet {
u32 gcr0; /* General Control Register 0 */
#define SRDS_GCR0_RRST 0x00400000
#define SRDS_GCR0_1STLANE 0x00010000
+#define SRDS_GCR0_UOTHL 0x00100000
u32 gcr1; /* General Control Register 1 */
#define SRDS_GCR1_REIDL_CTL_MASK 0x001f0000
#define SRDS_GCR1_REIDL_CTL_PCIE 0x00100000
@@ -2440,6 +2643,7 @@ typedef struct serdes_corenet {
} lane[24];
u32 res6[384];
} serdes_corenet_t;
+#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
enum {
FSL_SRDS_B1_LANE_A = 0,
@@ -2482,8 +2686,8 @@ typedef struct ccsr_sec {
struct {
u32 ms; /* DECO LIODN Register, MS */
u32 ls; /* DECO LIODN Register, LS */
- } decoliodnr[5];
- u8 res4[0x58];
+ } decoliodnr[8];
+ u8 res4[0x40];
u32 dar; /* DECO Avail Register */
u32 drr; /* DECO Reset Register */
u8 res5[0xe78];
@@ -2523,13 +2727,16 @@ typedef struct ccsr_sec {
#endif
typedef struct ccsr_qman {
+#ifdef CONFIG_SYS_FSL_QMAN_V3
+ u8 res0[0x200];
+#else
struct {
u32 qcsp_lio_cfg; /* 0x0 - SW Portal n LIO cfg */
u32 qcsp_io_cfg; /* 0x4 - SW Portal n IO cfg */
u32 res;
u32 qcsp_dd_cfg; /* 0xc - SW Portal n Dynamic Debug cfg */
} qcsp[32];
-
+#endif
/* Not actually reserved, but irrelevant to u-boot */
u8 res[0xbf8 - 0x200];
u32 ip_rev_1;
@@ -2554,6 +2761,14 @@ typedef struct ccsr_qman {
u32 ci_rlm_cfg; /* Initiator Read Latency Monitor Cfg */
u32 ci_rlm_avg; /* Initiator Read Latency Monitor Avg */
u8 res7[0x2e8];
+#ifdef CONFIG_SYS_FSL_QMAN_V3
+ struct {
+ u32 qcsp_lio_cfg; /* 0x0 - SW Portal n LIO cfg */
+ u32 qcsp_io_cfg; /* 0x4 - SW Portal n IO cfg */
+ u32 res;
+ u32 qcsp_dd_cfg; /* 0xc - SW Portal n Dynamic Debug cfg*/
+ } qcsp[50];
+#endif
} ccsr_qman_t;
typedef struct ccsr_bman {
@@ -2617,14 +2832,48 @@ struct ccsr_rman {
};
#endif
+#ifdef CONFIG_SYS_PMAN
+struct ccsr_pman {
+ u8 res_00[0x40];
+ u32 poes1; /* PMAN Operation Error Status Register 1 */
+ u32 poes2; /* PMAN Operation Error Status Register 2 */
+ u32 poeah; /* PMAN Operation Error Address High */
+ u32 poeal; /* PMAN Operation Error Address Low */
+ u8 res_50[0x50];
+ u32 pr1; /* PMAN Revision Register 1 */
+ u32 pr2; /* PMAN Revision Register 2 */
+ u8 res_a8[0x8];
+ u32 pcap; /* PMAN Capabilities Register */
+ u8 res_b4[0xc];
+ u32 pc1; /* PMAN Control Register 1 */
+ u32 pc2; /* PMAN Control Register 2 */
+ u32 pc3; /* PMAN Control Register 3 */
+ u32 pc4; /* PMAN Control Register 4 */
+ u32 pc5; /* PMAN Control Register 5 */
+ u32 pc6; /* PMAN Control Register 6 */
+ u8 res_d8[0x8];
+ u32 ppa1; /* PMAN Prefetch Attributes Register 1 */
+ u32 ppa2; /* PMAN Prefetch Attributes Register 2 */
+ u8 res_e8[0x8];
+ u32 pics; /* PMAN Interrupt Control and Status */
+ u8 res_f4[0xf0c];
+};
+#endif
+
#ifdef CONFIG_FSL_CORENET
#define CONFIG_SYS_FSL_CORENET_CCM_OFFSET 0x0000
+#ifdef CONFIG_SYS_PMAN
+#define CONFIG_SYS_FSL_CORENET_PMAN1_OFFSET 0x4000
+#define CONFIG_SYS_FSL_CORENET_PMAN2_OFFSET 0x5000
+#define CONFIG_SYS_FSL_CORENET_PMAN3_OFFSET 0x6000
+#endif
#define CONFIG_SYS_MPC85xx_DDR_OFFSET 0x8000
#define CONFIG_SYS_MPC85xx_DDR2_OFFSET 0x9000
#define CONFIG_SYS_MPC85xx_DDR3_OFFSET 0xA000
#define CONFIG_SYS_FSL_CORENET_CLK_OFFSET 0xE1000
#define CONFIG_SYS_FSL_CORENET_RCPM_OFFSET 0xE2000
#define CONFIG_SYS_FSL_CORENET_SERDES_OFFSET 0xEA000
+#define CONFIG_SYS_FSL_CORENET_SERDES2_OFFSET 0xEB000
#define CONFIG_SYS_FSL_CPC_OFFSET 0x10000
#define CONFIG_SYS_MPC85xx_DMA1_OFFSET 0x100000
#define CONFIG_SYS_MPC85xx_DMA2_OFFSET 0x101000
@@ -2635,10 +2884,17 @@ struct ccsr_rman {
#define CONFIG_SYS_MPC85xx_IFC_OFFSET 0x124000
#define CONFIG_SYS_MPC85xx_GPIO_OFFSET 0x130000
#define CONFIG_SYS_FSL_CORENET_RMAN_OFFSET 0x1e0000
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+#define CONFIG_SYS_MPC85xx_PCIE1_OFFSET 0x240000
+#define CONFIG_SYS_MPC85xx_PCIE2_OFFSET 0x250000
+#define CONFIG_SYS_MPC85xx_PCIE3_OFFSET 0x260000
+#define CONFIG_SYS_MPC85xx_PCIE4_OFFSET 0x270000
+#else
#define CONFIG_SYS_MPC85xx_PCIE1_OFFSET 0x200000
#define CONFIG_SYS_MPC85xx_PCIE2_OFFSET 0x201000
#define CONFIG_SYS_MPC85xx_PCIE3_OFFSET 0x202000
#define CONFIG_SYS_MPC85xx_PCIE4_OFFSET 0x203000
+#endif
#define CONFIG_SYS_MPC85xx_USB1_OFFSET 0x210000
#define CONFIG_SYS_MPC85xx_USB2_OFFSET 0x211000
#define CONFIG_SYS_MPC85xx_USB_OFFSET CONFIG_SYS_MPC85xx_USB1_OFFSET
@@ -2657,7 +2913,9 @@ struct ccsr_rman {
#define CONFIG_SYS_FSL_FM1_RX2_1G_OFFSET 0x48a000
#define CONFIG_SYS_FSL_FM1_RX3_1G_OFFSET 0x48b000
#define CONFIG_SYS_FSL_FM1_RX4_1G_OFFSET 0x48c000
+#define CONFIG_SYS_FSL_FM1_RX5_1G_OFFSET 0x48d000
#define CONFIG_SYS_FSL_FM1_RX0_10G_OFFSET 0x490000
+#define CONFIG_SYS_FSL_FM1_RX1_10G_OFFSET 0x491000
#define CONFIG_SYS_FSL_FM1_DTSEC1_OFFSET 0x4e0000
#define CONFIG_SYS_FSL_FM2_OFFSET 0x500000
#define CONFIG_SYS_FSL_FM2_RX0_1G_OFFSET 0x588000
@@ -2665,7 +2923,10 @@ struct ccsr_rman {
#define CONFIG_SYS_FSL_FM2_RX2_1G_OFFSET 0x58a000
#define CONFIG_SYS_FSL_FM2_RX3_1G_OFFSET 0x58b000
#define CONFIG_SYS_FSL_FM2_RX4_1G_OFFSET 0x58c000
+#define CONFIG_SYS_FSL_FM2_RX5_1G_OFFSET 0x58d000
#define CONFIG_SYS_FSL_FM2_RX0_10G_OFFSET 0x590000
+#define CONFIG_SYS_FSL_FM2_RX1_10G_OFFSET 0x591000
+#define CONFIG_SYS_FSL_CLUSTER_1_L2_OFFSET 0xC20000
#else
#define CONFIG_SYS_MPC85xx_ECM_OFFSET 0x0000
#define CONFIG_SYS_MPC85xx_DDR_OFFSET 0x2000
@@ -2775,6 +3036,8 @@ struct ccsr_rman {
(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_SERDES2_OFFSET)
#define CONFIG_SYS_FSL_CORENET_SERDES_ADDR \
(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_SERDES_OFFSET)
+#define CONFIG_SYS_FSL_CORENET_SERDES2_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_SERDES2_OFFSET)
#define CONFIG_SYS_MPC85xx_USB_ADDR \
(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_USB_OFFSET)
#define CONFIG_SYS_MPC85xx_USB1_PHY_ADDR \
@@ -2808,4 +3071,62 @@ struct ccsr_rman {
#define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
#define MDIO_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET)
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+struct ccsr_cluster_l2 {
+ u32 l2csr0; /* 0x000 L2 cache control and status register 0 */
+ u32 l2csr1; /* 0x004 L2 cache control and status register 1 */
+ u32 l2cfg0; /* 0x008 L2 cache configuration register 0 */
+ u8 res_0c[500];/* 0x00c - 0x1ff */
+ u32 l2pir0; /* 0x200 L2 cache partitioning ID register 0 */
+ u8 res_204[4];
+ u32 l2par0; /* 0x208 L2 cache partitioning allocation register 0 */
+ u32 l2pwr0; /* 0x20c L2 cache partitioning way register 0 */
+ u32 l2pir1; /* 0x210 L2 cache partitioning ID register 1 */
+ u8 res_214[4];
+ u32 l2par1; /* 0x218 L2 cache partitioning allocation register 1 */
+ u32 l2pwr1; /* 0x21c L2 cache partitioning way register 1 */
+ u32 u2pir2; /* 0x220 L2 cache partitioning ID register 2 */
+ u8 res_224[4];
+ u32 l2par2; /* 0x228 L2 cache partitioning allocation register 2 */
+ u32 l2pwr2; /* 0x22c L2 cache partitioning way register 2 */
+ u32 l2pir3; /* 0x230 L2 cache partitioning ID register 3 */
+ u8 res_234[4];
+ u32 l2par3; /* 0x238 L2 cache partitining allocation register 3 */
+ u32 l2pwr3; /* 0x23c L2 cache partitining way register 3 */
+ u32 l2pir4; /* 0x240 L2 cache partitioning ID register 3 */
+ u8 res244[4];
+ u32 l2par4; /* 0x248 L2 cache partitioning allocation register 3 */
+ u32 l2pwr4; /* 0x24c L2 cache partitioning way register 3 */
+ u32 l2pir5; /* 0x250 L2 cache partitioning ID register 3 */
+ u8 res_254[4];
+ u32 l2par5; /* 0x258 L2 cache partitioning allocation register 3 */
+ u32 l2pwr5; /* 0x25c L2 cache partitioning way register 3 */
+ u32 l2pir6; /* 0x260 L2 cache partitioning ID register 3 */
+ u8 res_264[4];
+ u32 l2par6; /* 0x268 L2 cache partitioning allocation register 3 */
+ u32 l2pwr6; /* 0x26c L2 cache partitioning way register 3 */
+ u32 l2pir7; /* 0x270 L2 cache partitioning ID register 3 */
+ u8 res274[4];
+ u32 l2par7; /* 0x278 L2 cache partitioning allocation register 3 */
+ u32 l2pwr7; /* 0x27c L2 cache partitioning way register 3 */
+ u8 res_280[0xb80]; /* 0x280 - 0xdff */
+ u32 l2errinjhi; /* 0xe00 L2 cache error injection mask high */
+ u32 l2errinjlo; /* 0xe04 L2 cache error injection mask low */
+ u32 l2errinjctl;/* 0xe08 L2 cache error injection control */
+ u8 res_e0c[20]; /* 0xe0c - 0x01f */
+ u32 l2captdatahi; /* 0xe20 L2 cache error capture data high */
+ u32 l2captdatalo; /* 0xe24 L2 cache error capture data low */
+ u32 l2captecc; /* 0xe28 L2 cache error capture ECC syndrome */
+ u8 res_e2c[20]; /* 0xe2c - 0xe3f */
+ u32 l2errdet; /* 0xe40 L2 cache error detect */
+ u32 l2errdis; /* 0xe44 L2 cache error disable */
+ u32 l2errinten; /* 0xe48 L2 cache error interrupt enable */
+ u32 l2errattr; /* 0xe4c L2 cache error attribute */
+ u32 l2erreaddr; /* 0xe50 L2 cache error extended address */
+ u32 l2erraddr; /* 0xe54 L2 cache error address */
+ u32 l2errctl; /* 0xe58 L2 cache error control */
+};
+#define CONFIG_SYS_FSL_CLUSTER_1_L2 \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CLUSTER_1_L2_OFFSET)
+#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
#endif /*__IMMAP_85xx__*/
diff --git a/arch/powerpc/include/asm/mp.h b/arch/powerpc/include/asm/mp.h
index fe490ba..9188ede 100644
--- a/arch/powerpc/include/asm/mp.h
+++ b/arch/powerpc/include/asm/mp.h
@@ -25,7 +25,7 @@
void setup_mp(void);
void cpu_mp_lmb_reserve(struct lmb *lmb);
-u32 determine_mp_bootpg(void);
+u32 determine_mp_bootpg(unsigned int *pagesize);
int is_core_disabled(int nr);
#ifdef CONFIG_E6500
diff --git a/arch/powerpc/include/asm/mpc85xx_gpio.h b/arch/powerpc/include/asm/mpc85xx_gpio.h
index 5a608a5..2aed514 100644
--- a/arch/powerpc/include/asm/mpc85xx_gpio.h
+++ b/arch/powerpc/include/asm/mpc85xx_gpio.h
@@ -98,7 +98,10 @@ static inline int gpio_direction_input(unsigned gpio)
static inline int gpio_direction_output(unsigned gpio, int value)
{
- mpc85xx_gpio_set_low(1U << gpio);
+ if (value)
+ mpc85xx_gpio_set_high(1U << gpio);
+ else
+ mpc85xx_gpio_set_low(1U << gpio);
return 0;
}
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 36695e2..7aa3231 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -1095,6 +1095,17 @@
#define SVR_P4080 0x820000
#define SVR_P5010 0x822100
#define SVR_P5020 0x822000
+#define SVR_P5021 0X820500
+#define SVR_P5040 0x820400
+#define SVR_T4240 0x824000
+#define SVR_T4120 0x824001
+#define SVR_B4860 0X868000
+#define SVR_G4860 0x868001
+#define SVR_G4060 0x868003
+#define SVR_B4440 0x868100
+#define SVR_G4440 0x868101
+#define SVR_B4420 0x868102
+#define SVR_B4220 0x868103
#define SVR_8610 0x80A000
#define SVR_8641 0x809000
diff --git a/arch/powerpc/lib/board.c b/arch/powerpc/lib/board.c
index b860141..ebf4008 100644
--- a/arch/powerpc/lib/board.c
+++ b/arch/powerpc/lib/board.c
@@ -440,8 +440,8 @@ void board_init_f(ulong bootflag)
* We need to make sure the location we intend to put secondary core
* boot code is reserved and not used by any part of u-boot
*/
- if (addr > determine_mp_bootpg()) {
- addr = determine_mp_bootpg();
+ if (addr > determine_mp_bootpg(NULL)) {
+ addr = determine_mp_bootpg(NULL);
debug("Reserving MP boot page to %08lx\n", addr);
}
#endif
diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile
index 54cb098..36f7c4f 100644
--- a/board/freescale/common/Makefile
+++ b/board/freescale/common/Makefile
@@ -53,6 +53,7 @@ COBJS-$(CONFIG_P2020DS) += ics307_clk.o
COBJS-$(CONFIG_P3041DS) += ics307_clk.o
COBJS-$(CONFIG_P4080DS) += ics307_clk.o
COBJS-$(CONFIG_P5020DS) += ics307_clk.o
+COBJS-$(CONFIG_VSC_CROSSBAR) += vsc3316_3308.o
# deal with common files for P-series corenet based devices
SUBLIB-$(CONFIG_P2041RDB) += p_corenet/libp_corenet.o
diff --git a/board/freescale/common/qixis.c b/board/freescale/common/qixis.c
index 6cd7e51..c92902a 100644
--- a/board/freescale/common/qixis.c
+++ b/board/freescale/common/qixis.c
@@ -32,22 +32,22 @@ void qixis_write(unsigned int reg, u8 value)
void qixis_reset(void)
{
- QIXIS_WRITE(rst_ctl, 0x83);
+ QIXIS_WRITE(rst_ctl, QIXIS_RST_CTL_RESET);
}
void qixis_bank_reset(void)
{
- QIXIS_WRITE(rcfg_ctl, 0x20);
- QIXIS_WRITE(rcfg_ctl, 0x21);
+ QIXIS_WRITE(rcfg_ctl, QIXIS_RCFG_CTL_RECONFIG_IDLE);
+ QIXIS_WRITE(rcfg_ctl, QIXIS_RCFG_CTL_RECONFIG_START);
}
-/* Set the boot bank to the power-on default bank0 */
+/* Set the boot bank to the power-on default bank */
void clear_altbank(void)
{
u8 reg;
reg = QIXIS_READ(brdcfg[0]);
- reg = reg & ~QIXIS_LBMAP_MASK;
+ reg = (reg & ~QIXIS_LBMAP_MASK) | QIXIS_LBMAP_DFLTBANK;
QIXIS_WRITE(brdcfg[0], reg);
}
@@ -85,11 +85,11 @@ static void qixis_dump_regs(void)
printf("ctl_sys = %02x\n", QIXIS_READ(ctl_sys));
printf("rcw_ctl = %02x\n", QIXIS_READ(rcw_ctl));
printf("present = %02x\n", QIXIS_READ(present));
+ printf("present2 = %02x\n", QIXIS_READ(present2));
printf("clk_spd = %02x\n", QIXIS_READ(clk_spd));
printf("stat_dut = %02x\n", QIXIS_READ(stat_dut));
printf("stat_sys = %02x\n", QIXIS_READ(stat_sys));
printf("stat_alrm = %02x\n", QIXIS_READ(stat_alrm));
- printf("ctl_sys2 = %02x\n", QIXIS_READ(ctl_sys2));
}
#endif
@@ -115,7 +115,8 @@ int qixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
for (i = 0; i < ARRAY_SIZE(period); i++) {
if (strcmp(argv[2], period[i]) == 0) {
/* disable watchdog */
- QIXIS_WRITE(rcfg_ctl, rcfg & ~0x08);
+ QIXIS_WRITE(rcfg_ctl,
+ rcfg & ~QIXIS_RCFG_CTL_WATCHDOG_ENBLE);
QIXIS_WRITE(watch, ((i<<2) - 1));
QIXIS_WRITE(rcfg_ctl, rcfg);
return 0;
diff --git a/board/freescale/common/qixis.h b/board/freescale/common/qixis.h
index 7a0268a..b98b180 100644
--- a/board/freescale/common/qixis.h
+++ b/board/freescale/common/qixis.h
@@ -26,7 +26,7 @@ struct qixis {
u8 stat_sys;
u8 stat_alrm;
u8 present;
- u8 ctl_sys2;
+ u8 present2; /* Presence Status Register 2,0x0c */
u8 rcw_ctl;
u8 ctl_led;
u8 i2cblk;
@@ -86,12 +86,6 @@ struct qixis {
u8 res15[16];
};
-#define QIXIS_BASE 0xffdf0000
-#define QIXIS_LBMAP_SWITCH 7
-#define QIXIS_LBMAP_MASK 0x0f
-#define QIXIS_LBMAP_SHIFT 0
-#define QIXIS_LBMAP_ALTBANK 0x04
-
u8 qixis_read(unsigned int reg);
void qixis_write(unsigned int reg, u8 value);
diff --git a/board/freescale/common/vsc3316_3308.c b/board/freescale/common/vsc3316_3308.c
new file mode 100644
index 0000000..7868565
--- /dev/null
+++ b/board/freescale/common/vsc3316_3308.c
@@ -0,0 +1,184 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include "vsc3316_3308.h"
+
+#define REVISION_ID_REG 0x7E
+#define INTERFACE_MODE_REG 0x79
+#define CURRENT_PAGE_REGISTER 0x7F
+#define CONNECTION_CONFIG_PAGE 0x00
+#define INPUT_STATE_REG 0x13
+#define GLOBAL_INPUT_ISE1 0x51
+#define GLOBAL_INPUT_ISE2 0x52
+#define GLOBAL_INPUT_LOS 0x55
+#define GLOBAL_CORE_CNTRL 0x5D
+#define OUTPUT_MODE_PAGE 0x23
+#define CORE_CONTROL_PAGE 0x25
+#define CORE_CONFIG_REG 0x75
+
+int vsc_if_enable(unsigned int vsc_addr)
+{
+ u8 data;
+
+ debug("VSC:Configuring VSC at I2C address 0x%2x"
+ " for 2-wire interface\n", vsc_addr);
+
+ /* enable 2-wire Serial InterFace (I2C) */
+ data = 0x02;
+ return i2c_write(vsc_addr, INTERFACE_MODE_REG, 1, &data, 1);
+}
+
+int vsc3316_config(unsigned int vsc_addr, const int8_t con_arr[][2],
+ unsigned int num_con)
+{
+ unsigned int i;
+ u8 rev_id = 0;
+ int ret;
+
+ debug("VSC:Initializing VSC3316 at I2C address 0x%2x"
+ " for Tx\n", vsc_addr);
+
+ ret = i2c_read(vsc_addr, REVISION_ID_REG, 1, &rev_id, 1);
+ if (ret < 0) {
+ printf("VSC:0x%x could not read REV_ID from device.\n",
+ vsc_addr);
+ return ret;
+ }
+
+ if (rev_id != 0xab) {
+ printf("VSC: device at address 0x%x is not VSC3316/3308.\n",
+ vsc_addr);
+ return -ENODEV;
+ }
+
+ ret = vsc_if_enable(vsc_addr);
+ if (ret) {
+ printf("VSC:0x%x could not configured for 2-wire I/F.\n",
+ vsc_addr);
+ return ret;
+ }
+
+ /* config connections - page 0x00 */
+ i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, CONNECTION_CONFIG_PAGE);
+
+ /* Making crosspoint connections, by connecting required
+ * input to output */
+ for (i = 0; i < num_con ; i++)
+ i2c_reg_write(vsc_addr, con_arr[i][1], con_arr[i][0]);
+
+ /* input state - page 0x13 */
+ i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, INPUT_STATE_REG);
+ /* Configuring the required input of the switch */
+ for (i = 0; i < num_con ; i++)
+ i2c_reg_write(vsc_addr, con_arr[i][0], 0x80);
+
+ /* Setting Global Input LOS threshold value */
+ i2c_reg_write(vsc_addr, GLOBAL_INPUT_LOS, 0x60);
+
+ /* config output mode - page 0x23 */
+ i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, OUTPUT_MODE_PAGE);
+ /* Turn ON the Output driver correspond to required output*/
+ for (i = 0; i < num_con ; i++)
+ i2c_reg_write(vsc_addr, con_arr[i][1], 0);
+
+ /* configure global core control register, Turn on Global core power */
+ i2c_reg_write(vsc_addr, GLOBAL_CORE_CNTRL, 0);
+
+ vsc_wp_config(vsc_addr);
+
+ return 0;
+}
+
+int vsc3308_config(unsigned int vsc_addr, const int8_t con_arr[][2],
+ unsigned int num_con)
+{
+ unsigned int i;
+ u8 rev_id = 0;
+ int ret;
+
+ debug("VSC:Initializing VSC3308 at I2C address 0x%x"
+ " for Tx\n", vsc_addr);
+
+ ret = i2c_read(vsc_addr, REVISION_ID_REG, 1, &rev_id, 1);
+ if (ret < 0) {
+ printf("VSC:0x%x could not read REV_ID from device.\n",
+ vsc_addr);
+ return ret;
+ }
+
+ if (rev_id != 0xab) {
+ printf("VSC: device at address 0x%x is not VSC3316/3308.\n",
+ vsc_addr);
+ return -ENODEV;
+ }
+
+ ret = vsc_if_enable(vsc_addr);
+ if (ret) {
+ printf("VSC:0x%x could not configured for 2-wire I/F.\n",
+ vsc_addr);
+ return ret;
+ }
+
+ /* config connections - page 0x00 */
+ i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, CONNECTION_CONFIG_PAGE);
+
+ /* Making crosspoint connections, by connecting required
+ * input to output */
+ for (i = 0; i < num_con ; i++)
+ i2c_reg_write(vsc_addr, con_arr[i][1], con_arr[i][0]);
+
+ /*Configure Global Input ISE and gain */
+ i2c_reg_write(vsc_addr, GLOBAL_INPUT_ISE1, 0x12);
+ i2c_reg_write(vsc_addr, GLOBAL_INPUT_ISE2, 0x12);
+
+ /* input state - page 0x13 */
+ i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, INPUT_STATE_REG);
+ /* Turning ON the required input of the switch */
+ for (i = 0; i < num_con ; i++)
+ i2c_reg_write(vsc_addr, con_arr[i][0], 0);
+
+ /* Setting Global Input LOS threshold value */
+ i2c_reg_write(vsc_addr, GLOBAL_INPUT_LOS, 0x60);
+
+ /* config output mode - page 0x23 */
+ i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, OUTPUT_MODE_PAGE);
+ /* Turn ON the Output driver correspond to required output*/
+ for (i = 0; i < num_con ; i++)
+ i2c_reg_write(vsc_addr, con_arr[i][1], 0);
+
+ /* configure global core control register, Turn on Global core power */
+ i2c_reg_write(vsc_addr, GLOBAL_CORE_CNTRL, 0);
+
+ vsc_wp_config(vsc_addr);
+
+ return 0;
+}
+
+void vsc_wp_config(unsigned int vsc_addr)
+{
+ debug("VSC:Configuring VSC at address:0x%x for WP\n", vsc_addr);
+
+ /* For new crosspoint configuration to occur, WP bit of
+ * CORE_CONFIG_REG should be set 1 and then reset to 0 */
+ i2c_reg_write(vsc_addr, CORE_CONFIG_REG, 0x01);
+ i2c_reg_write(vsc_addr, CORE_CONFIG_REG, 0x0);
+}
diff --git a/board/freescale/common/vsc3316_3308.h b/board/freescale/common/vsc3316_3308.h
new file mode 100644
index 0000000..effd66d
--- /dev/null
+++ b/board/freescale/common/vsc3316_3308.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __VSC_CROSSBAR_H_
+#define __VSC_CROSSBAR_H 1_
+
+#include <common.h>
+#include <i2c.h>
+#include <errno.h>
+
+int vsc_if_enable(unsigned int vsc_addr);
+int vsc3316_config(unsigned int vsc_addr, const int8_t con_arr[][2],
+ unsigned int num_con);
+int vsc3308_config(unsigned int vsc_addr, const int8_t con_arr[][2],
+ unsigned int num_con);
+void vsc_wp_config(unsigned int vsc_addr);
+
+#endif /* __VSC_CROSSBAR_H_ */
diff --git a/board/freescale/t4qds/Makefile b/board/freescale/t4qds/Makefile
new file mode 100644
index 0000000..ff09ffa
--- /dev/null
+++ b/board/freescale/t4qds/Makefile
@@ -0,0 +1,54 @@
+#
+# Copyright 2012 Freescale Semiconductor, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS-y += $(BOARD).o
+COBJS-y += ddr.o
+COBJS-$(CONFIG_T4240QDS)+= eth.o
+COBJS-$(CONFIG_PCI) += pci.o
+COBJS-y += law.o
+COBJS-y += tlb.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS-y))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+clean:
+ rm -f $(OBJS) $(SOBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/freescale/t4qds/ddr.c b/board/freescale/t4qds/ddr.c
new file mode 100644
index 0000000..692616a
--- /dev/null
+++ b/board/freescale/t4qds/ddr.c
@@ -0,0 +1,186 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 or later as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <hwconfig.h>
+#include <asm/mmu.h>
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
+#include <asm/fsl_law.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct board_specific_parameters {
+ u32 n_ranks;
+ u32 datarate_mhz_high;
+ u32 clk_adjust;
+ u32 wrlvl_start;
+ u32 wrlvl_ctl_2;
+ u32 wrlvl_ctl_3;
+ u32 cpo;
+ u32 write_data_delay;
+ u32 force_2T;
+};
+
+/*
+ * This table contains all valid speeds we want to override with board
+ * specific parameters. datarate_mhz_high values need to be in ascending order
+ * for each n_ranks group.
+ */
+static const struct board_specific_parameters udimm0[] = {
+ /*
+ * memory controller 0
+ * num| hi| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T
+ * ranks| mhz|adjst| start | ctl2 | ctl3 | |delay |
+ */
+ {2, 1350, 5, 7, 0x0809090b, 0x0c0c0d09, 0xff, 2, 0},
+ {2, 1666, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0},
+ {2, 2140, 5, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0},
+ {1, 1350, 5, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0},
+ {1, 1700, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0},
+ {1, 1900, 4, 8, 0x080a0a0c, 0x0e0e0f0a, 0xff, 2, 0},
+ {1, 2140, 4, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0},
+ {}
+};
+
+/*
+ * The three slots have slightly different timing. The center values are good
+ * for all slots. We use identical speed tables for them. In future use, if
+ * DIMMs require separated tables, make more entries as needed.
+ */
+static const struct board_specific_parameters *udimms[] = {
+ udimm0,
+};
+
+static const struct board_specific_parameters rdimm0[] = {
+ /*
+ * memory controller 0
+ * num| hi| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T
+ * ranks| mhz|adjst| start | ctl2 | ctl3 | |delay |
+ */
+ {4, 1350, 5, 9, 0x08070605, 0x07080805, 0xff, 2, 0},
+ {4, 1666, 5, 8, 0x08070605, 0x07080805, 0xff, 2, 0},
+ {4, 2140, 5, 8, 0x08070605, 0x07081805, 0xff, 2, 0},
+ {2, 1350, 5, 7, 0x0809090b, 0x0c0c0d09, 0xff, 2, 0},
+ {2, 1666, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0},
+ {2, 2140, 5, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0},
+ {1, 1350, 5, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0},
+ {1, 1700, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0},
+ {1, 1900, 4, 8, 0x080a0a0c, 0x0e0e0f0a, 0xff, 2, 0},
+ {1, 2140, 4, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0},
+ {}
+};
+
+/*
+ * The three slots have slightly different timing. See comments above.
+ */
+static const struct board_specific_parameters *rdimms[] = {
+ rdimm0,
+};
+
+void fsl_ddr_board_options(memctl_options_t *popts,
+ dimm_params_t *pdimm,
+ unsigned int ctrl_num)
+{
+ const struct board_specific_parameters *pbsp, *pbsp_highest = NULL;
+ ulong ddr_freq;
+
+ if (ctrl_num > 2) {
+ printf("Not supported controller number %d\n", ctrl_num);
+ return;
+ }
+ if (!pdimm->n_ranks)
+ return;
+
+ /*
+ * we use identical timing for all slots. If needed, change the code
+ * to pbsp = rdimms[ctrl_num] or pbsp = udimms[ctrl_num];
+ */
+ if (popts->registered_dimm_en)
+ pbsp = rdimms[0];
+ else
+ pbsp = udimms[0];
+
+
+ /* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr
+ * freqency and n_banks specified in board_specific_parameters table.
+ */
+ ddr_freq = get_ddr_freq(0) / 1000000;
+ while (pbsp->datarate_mhz_high) {
+ if (pbsp->n_ranks == pdimm->n_ranks) {
+ if (ddr_freq <= pbsp->datarate_mhz_high) {
+ popts->cpo_override = pbsp->cpo;
+ popts->write_data_delay =
+ pbsp->write_data_delay;
+ popts->clk_adjust = pbsp->clk_adjust;
+ popts->wrlvl_start = pbsp->wrlvl_start;
+ popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
+ popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
+ popts->twoT_en = pbsp->force_2T;
+ goto found;
+ }
+ pbsp_highest = pbsp;
+ }
+ pbsp++;
+ }
+
+ if (pbsp_highest) {
+ printf("Error: board specific timing not found "
+ "for data rate %lu MT/s\n"
+ "Trying to use the highest speed (%u) parameters\n",
+ ddr_freq, pbsp_highest->datarate_mhz_high);
+ popts->cpo_override = pbsp_highest->cpo;
+ popts->write_data_delay = pbsp_highest->write_data_delay;
+ popts->clk_adjust = pbsp_highest->clk_adjust;
+ popts->wrlvl_start = pbsp_highest->wrlvl_start;
+ popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
+ popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
+ popts->twoT_en = pbsp_highest->force_2T;
+ } else {
+ panic("DIMM is not supported by this board");
+ }
+found:
+ /*
+ * Factors to consider for half-strength driver enable:
+ * - number of DIMMs installed
+ */
+ popts->half_strength_driver_enable = 0;
+ /*
+ * Write leveling override
+ */
+ popts->wrlvl_override = 1;
+ popts->wrlvl_sample = 0xf;
+
+ /*
+ * Rtt and Rtt_WR override
+ */
+ popts->rtt_override = 0;
+
+ /* Enable ZQ calibration */
+ popts->zq_en = 1;
+
+ /* DHC_EN =1, ODT = 75 Ohm */
+ popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm);
+ popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm);
+}
+
+phys_size_t initdram(int board_type)
+{
+ phys_size_t dram_size;
+
+ puts("Initializing....using SPD\n");
+
+ dram_size = fsl_ddr_sdram();
+
+ dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+ dram_size *= 0x100000;
+
+ puts(" DDR: ");
+ return dram_size;
+}
diff --git a/board/freescale/t4qds/eth.c b/board/freescale/t4qds/eth.c
new file mode 100644
index 0000000..a49c7d4
--- /dev/null
+++ b/board/freescale/t4qds/eth.c
@@ -0,0 +1,495 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <netdev.h>
+#include <asm/mmu.h>
+#include <asm/processor.h>
+#include <asm/cache.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_law.h>
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_serdes.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+#include <malloc.h>
+#include <fm_eth.h>
+#include <fsl_mdio.h>
+#include <miiphy.h>
+#include <phy.h>
+#include <asm/fsl_dtsec.h>
+#include <asm/fsl_serdes.h>
+#include "../common/qixis.h"
+#include "../common/fman.h"
+
+#include "t4240qds_qixis.h"
+
+#define EMI_NONE 0xFFFFFFFF
+#define EMI1_RGMII 0
+#define EMI1_SLOT1 1
+#define EMI1_SLOT2 2
+#define EMI1_SLOT3 3
+#define EMI1_SLOT4 4
+#define EMI1_SLOT5 5
+#define EMI1_SLOT7 7
+#define EMI2 8 /* tmp, FIXME */
+/* Slot6 and Slot8 do not have EMI connections */
+
+static int mdio_mux[NUM_FM_PORTS];
+
+static const char *mdio_names[] = {
+ "T4240QDS_MDIO0",
+ "T4240QDS_MDIO1",
+ "T4240QDS_MDIO2",
+ "T4240QDS_MDIO3",
+ "T4240QDS_MDIO4",
+ "T4240QDS_MDIO5",
+ "NULL",
+ "T4240QDS_MDIO7",
+ "T4240QDS_10GC",
+};
+
+static u8 lane_to_slot_fsm1[] = {1, 1, 1, 1, 2, 2, 2, 2};
+static u8 lane_to_slot_fsm2[] = {3, 3, 3, 3, 4, 4, 4, 4};
+
+static const char *t4240qds_mdio_name_for_muxval(u8 muxval)
+{
+ return mdio_names[muxval];
+}
+
+struct mii_dev *mii_dev_for_muxval(u8 muxval)
+{
+ struct mii_dev *bus;
+ const char *name = t4240qds_mdio_name_for_muxval(muxval);
+
+ if (!name) {
+ printf("No bus for muxval %x\n", muxval);
+ return NULL;
+ }
+
+ bus = miiphy_get_dev_by_name(name);
+
+ if (!bus) {
+ printf("No bus by name %s\n", name);
+ return NULL;
+ }
+
+ return bus;
+}
+
+struct t4240qds_mdio {
+ u8 muxval;
+ struct mii_dev *realbus;
+};
+
+static void t4240qds_mux_mdio(u8 muxval)
+{
+ u8 brdcfg4;
+ if ((muxval < 6) || (muxval == 7)) {
+ brdcfg4 = QIXIS_READ(brdcfg[4]);
+ brdcfg4 &= ~BRDCFG4_EMISEL_MASK;
+ brdcfg4 |= (muxval << BRDCFG4_EMISEL_SHIFT);
+ QIXIS_WRITE(brdcfg[4], brdcfg4);
+ }
+}
+
+static int t4240qds_mdio_read(struct mii_dev *bus, int addr, int devad,
+ int regnum)
+{
+ struct t4240qds_mdio *priv = bus->priv;
+
+ t4240qds_mux_mdio(priv->muxval);
+
+ return priv->realbus->read(priv->realbus, addr, devad, regnum);
+}
+
+static int t4240qds_mdio_write(struct mii_dev *bus, int addr, int devad,
+ int regnum, u16 value)
+{
+ struct t4240qds_mdio *priv = bus->priv;
+
+ t4240qds_mux_mdio(priv->muxval);
+
+ return priv->realbus->write(priv->realbus, addr, devad, regnum, value);
+}
+
+static int t4240qds_mdio_reset(struct mii_dev *bus)
+{
+ struct t4240qds_mdio *priv = bus->priv;
+
+ return priv->realbus->reset(priv->realbus);
+}
+
+static int t4240qds_mdio_init(char *realbusname, u8 muxval)
+{
+ struct t4240qds_mdio *pmdio;
+ struct mii_dev *bus = mdio_alloc();
+
+ if (!bus) {
+ printf("Failed to allocate T4240QDS MDIO bus\n");
+ return -1;
+ }
+
+ pmdio = malloc(sizeof(*pmdio));
+ if (!pmdio) {
+ printf("Failed to allocate T4240QDS private data\n");
+ free(bus);
+ return -1;
+ }
+
+ bus->read = t4240qds_mdio_read;
+ bus->write = t4240qds_mdio_write;
+ bus->reset = t4240qds_mdio_reset;
+ sprintf(bus->name, t4240qds_mdio_name_for_muxval(muxval));
+
+ pmdio->realbus = miiphy_get_dev_by_name(realbusname);
+
+ if (!pmdio->realbus) {
+ printf("No bus with name %s\n", realbusname);
+ free(bus);
+ free(pmdio);
+ return -1;
+ }
+
+ pmdio->muxval = muxval;
+ bus->priv = pmdio;
+
+ return mdio_register(bus);
+}
+
+void board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa,
+ enum fm_port port, int offset)
+{
+ if (mdio_mux[port] == EMI1_RGMII)
+ fdt_set_phy_handle(blob, prop, pa, "phy_rgmii");
+
+ /* TODO: will do with dts */
+}
+
+void fdt_fixup_board_enet(void *fdt)
+{
+ /* TODO: will do with dts */
+}
+
+int board_eth_init(bd_t *bis)
+{
+#if defined(CONFIG_FMAN_ENET)
+ int i;
+ struct memac_mdio_info dtsec_mdio_info;
+ struct memac_mdio_info tgec_mdio_info;
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 srds_prtcl_s1, srds_prtcl_s2;
+
+ srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) &
+ FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
+ srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
+ srds_prtcl_s2 = in_be32(&gur->rcwsr[4]) &
+ FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
+ srds_prtcl_s2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
+
+ /* Initialize the mdio_mux array so we can recognize empty elements */
+ for (i = 0; i < NUM_FM_PORTS; i++)
+ mdio_mux[i] = EMI_NONE;
+
+ dtsec_mdio_info.regs =
+ (struct memac_mdio_controller *)CONFIG_SYS_FM2_DTSEC_MDIO_ADDR;
+
+ dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME;
+
+ /* Register the 1G MDIO bus */
+ fm_memac_mdio_init(bis, &dtsec_mdio_info);
+
+ tgec_mdio_info.regs =
+ (struct memac_mdio_controller *)CONFIG_SYS_FM2_TGEC_MDIO_ADDR;
+ tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME;
+
+ /* Register the 10G MDIO bus */
+ fm_memac_mdio_init(bis, &tgec_mdio_info);
+
+ /* Register the muxing front-ends to the MDIO buses */
+ t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII);
+ t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT1);
+ t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT2);
+ t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT3);
+ t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT4);
+ t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT5);
+ t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT7);
+ t4240qds_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME, EMI2);
+
+
+ switch (srds_prtcl_s1) {
+ case 1:
+ case 2:
+ case 4:
+ /* XAUI/HiGig in Slot1 and Slot2 */
+ fm_info_set_phy_address(FM1_10GEC1, FM1_10GEC1_PHY_ADDR);
+ fm_info_set_phy_address(FM1_10GEC2, FM1_10GEC2_PHY_ADDR);
+ break;
+ case 28:
+ case 36:
+ /* SGMII in Slot1 and Slot2 */
+ fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC3, SGMII_CARD_PORT3_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC4, SGMII_CARD_PORT4_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT1_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR);
+ if ((srds_prtcl_s2 != 56) && (srds_prtcl_s2 != 57)) {
+ fm_info_set_phy_address(FM1_DTSEC9,
+ SGMII_CARD_PORT4_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC10,
+ SGMII_CARD_PORT3_PHY_ADDR);
+ }
+ break;
+ case 38:
+ fm_info_set_phy_address(FM1_DTSEC5, QSGMII_CARD_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC6, QSGMII_CARD_PHY_ADDR);
+ if ((srds_prtcl_s2 != 56) && (srds_prtcl_s2 != 57)) {
+ fm_info_set_phy_address(FM1_DTSEC9,
+ QSGMII_CARD_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC10,
+ QSGMII_CARD_PHY_ADDR);
+ }
+ break;
+ case 40:
+ case 46:
+ case 48:
+ fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT1_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR);
+ if ((srds_prtcl_s2 != 56) && (srds_prtcl_s2 != 57)) {
+ fm_info_set_phy_address(FM1_DTSEC10,
+ SGMII_CARD_PORT3_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC9,
+ SGMII_CARD_PORT4_PHY_ADDR);
+ }
+ fm_info_set_phy_address(FM1_DTSEC1, QSGMII_CARD_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC2, QSGMII_CARD_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC3, QSGMII_CARD_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC4, QSGMII_CARD_PHY_ADDR);
+ break;
+ default:
+ puts("Invalid SerDes1 protocol for T4240QDS\n");
+ break;
+ }
+
+ for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
+ int idx = i - FM1_DTSEC1, lane, slot;
+ switch (fm_info_get_enet_if(i)) {
+ case PHY_INTERFACE_MODE_SGMII:
+ lane = serdes_get_first_lane(FSL_SRDS_1,
+ SGMII_FM1_DTSEC1 + idx);
+ if (lane < 0)
+ break;
+ slot = lane_to_slot_fsm1[lane];
+ debug("FM1@DTSEC%u expects SGMII in slot %u\n",
+ idx + 1, slot);
+ if (QIXIS_READ(present2) & (1 << (slot - 1)))
+ fm_disable_port(i);
+ switch (slot) {
+ case 1:
+ mdio_mux[i] = EMI1_SLOT1;
+ fm_info_set_mdio(i,
+ mii_dev_for_muxval(mdio_mux[i]));
+ break;
+ case 2:
+ mdio_mux[i] = EMI1_SLOT2;
+ fm_info_set_mdio(i,
+ mii_dev_for_muxval(mdio_mux[i]));
+ break;
+ };
+ break;
+ case PHY_INTERFACE_MODE_RGMII:
+ /* FM1 DTSEC5 routes to RGMII with EC2 */
+ debug("FM1@DTSEC%u is RGMII at address %u\n",
+ idx + 1, 2);
+ if (i == FM1_DTSEC5)
+ fm_info_set_phy_address(i, 2);
+ mdio_mux[i] = EMI1_RGMII;
+ fm_info_set_mdio(i,
+ mii_dev_for_muxval(mdio_mux[i]));
+ break;
+ default:
+ break;
+ }
+ }
+
+ for (i = FM1_10GEC1; i < FM1_10GEC1 + CONFIG_SYS_NUM_FM1_10GEC; i++) {
+ switch (fm_info_get_enet_if(i)) {
+ case PHY_INTERFACE_MODE_XGMII:
+ mdio_mux[i] = EMI2;
+ fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
+ break;
+ default:
+ break;
+ }
+ }
+
+
+#if (CONFIG_SYS_NUM_FMAN == 2)
+ switch (srds_prtcl_s2) {
+ case 1:
+ case 2:
+ case 4:
+ /* XAUI/HiGig in Slot3 and Slot4 */
+ fm_info_set_phy_address(FM2_10GEC1, FM2_10GEC1_PHY_ADDR);
+ fm_info_set_phy_address(FM2_10GEC2, FM2_10GEC2_PHY_ADDR);
+ break;
+ case 7:
+ case 13:
+ case 14:
+ case 16:
+ case 22:
+ case 23:
+ case 25:
+ case 26:
+ /* XAUI/HiGig in Slot3, SGMII in Slot4 */
+ fm_info_set_phy_address(FM2_10GEC1, FM2_10GEC1_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC3, SGMII_CARD_PORT3_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC4, SGMII_CARD_PORT4_PHY_ADDR);
+ break;
+ case 28:
+ case 36:
+ /* SGMII in Slot3 and Slot4 */
+ fm_info_set_phy_address(FM2_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC3, SGMII_CARD_PORT3_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC4, SGMII_CARD_PORT4_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC5, SGMII_CARD_PORT1_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC9, SGMII_CARD_PORT4_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC10, SGMII_CARD_PORT3_PHY_ADDR);
+ break;
+ case 38:
+ /* QSGMII in Slot3 and Slot4 */
+ fm_info_set_phy_address(FM2_DTSEC1, QSGMII_CARD_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC2, QSGMII_CARD_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC3, QSGMII_CARD_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC4, QSGMII_CARD_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC5, QSGMII_CARD_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC6, QSGMII_CARD_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC9, QSGMII_CARD_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC10, QSGMII_CARD_PHY_ADDR);
+ break;
+ case 40:
+ case 46:
+ case 48:
+ /* SGMII in Slot3 */
+ fm_info_set_phy_address(FM2_DTSEC5, SGMII_CARD_PORT1_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC9, SGMII_CARD_PORT4_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC10, SGMII_CARD_PORT3_PHY_ADDR);
+ /* QSGMII in Slot4 */
+ fm_info_set_phy_address(FM2_DTSEC1, QSGMII_CARD_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC2, QSGMII_CARD_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC3, QSGMII_CARD_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC4, QSGMII_CARD_PHY_ADDR);
+ break;
+ case 50:
+ case 52:
+ case 54:
+ fm_info_set_phy_address(FM2_10GEC1, FM2_10GEC1_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC1, QSGMII_CARD_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC2, QSGMII_CARD_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC3, QSGMII_CARD_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC4, QSGMII_CARD_PHY_ADDR);
+ break;
+ case 56:
+ case 57:
+ /* XFI in Slot3, SGMII in Slot4 */
+ fm_info_set_phy_address(FM1_10GEC1, XFI_CARD_PORT1_PHY_ADDR);
+ fm_info_set_phy_address(FM1_10GEC2, XFI_CARD_PORT2_PHY_ADDR);
+ fm_info_set_phy_address(FM2_10GEC2, XFI_CARD_PORT3_PHY_ADDR);
+ fm_info_set_phy_address(FM2_10GEC1, XFI_CARD_PORT4_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC3, SGMII_CARD_PORT3_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC4, SGMII_CARD_PORT4_PHY_ADDR);
+ break;
+ default:
+ puts("Invalid SerDes2 protocol for T4240QDS\n");
+ break;
+ }
+
+ for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) {
+ int idx = i - FM2_DTSEC1, lane, slot;
+ switch (fm_info_get_enet_if(i)) {
+ case PHY_INTERFACE_MODE_SGMII:
+ lane = serdes_get_first_lane(FSL_SRDS_2,
+ SGMII_FM2_DTSEC1 + idx);
+ if (lane < 0)
+ break;
+ slot = lane_to_slot_fsm2[lane];
+ debug("FM2@DTSEC%u expects SGMII in slot %u\n",
+ idx + 1, slot);
+ if (QIXIS_READ(present2) & (1 << (slot - 1)))
+ fm_disable_port(i);
+ switch (slot) {
+ case 3:
+ mdio_mux[i] = EMI1_SLOT3;
+ fm_info_set_mdio(i,
+ mii_dev_for_muxval(mdio_mux[i]));
+ break;
+ case 4:
+ mdio_mux[i] = EMI1_SLOT4;
+ fm_info_set_mdio(i,
+ mii_dev_for_muxval(mdio_mux[i]));
+ break;
+ };
+ break;
+ case PHY_INTERFACE_MODE_RGMII:
+ /*
+ * If DTSEC5 is RGMII, then it's routed via via EC1 to
+ * the first on-board RGMII port. If DTSEC6 is RGMII,
+ * then it's routed via via EC2 to the second on-board
+ * RGMII port.
+ */
+ debug("FM2@DTSEC%u is RGMII at address %u\n",
+ idx + 1, i == FM2_DTSEC5 ? 1 : 2);
+ fm_info_set_phy_address(i, i == FM2_DTSEC5 ? 1 : 2);
+ mdio_mux[i] = EMI1_RGMII;
+ fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
+ break;
+ default:
+ break;
+ }
+ }
+
+ for (i = FM2_10GEC1; i < FM2_10GEC1 + CONFIG_SYS_NUM_FM2_10GEC; i++) {
+ switch (fm_info_get_enet_if(i)) {
+ case PHY_INTERFACE_MODE_XGMII:
+ mdio_mux[i] = EMI2;
+ fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
+ break;
+ default:
+ break;
+ }
+ }
+#endif /* CONFIG_SYS_NUM_FMAN */
+
+ cpu_eth_init(bis);
+#endif /* CONFIG_FMAN_ENET */
+
+ return pci_eth_init(bis);
+}
diff --git a/board/freescale/t4qds/law.c b/board/freescale/t4qds/law.c
new file mode 100644
index 0000000..5debcf6
--- /dev/null
+++ b/board/freescale/t4qds/law.c
@@ -0,0 +1,47 @@
+/*
+ * Copyright 2008-2012 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+struct law_entry law_table[] = {
+ SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_IFC),
+#ifdef CONFIG_SYS_BMAN_MEM_PHYS
+ SET_LAW(CONFIG_SYS_BMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_BMAN),
+#endif
+#ifdef CONFIG_SYS_QMAN_MEM_PHYS
+ SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN),
+#endif
+ SET_LAW(QIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC),
+#ifdef CONFIG_SYS_DCSRBAR_PHYS
+ SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_DCSR),
+#endif
+#ifdef CONFIG_SYS_NAND_BASE_PHYS
+ SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_IFC),
+#endif
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/t4qds/pci.c b/board/freescale/t4qds/pci.c
new file mode 100644
index 0000000..fc00b4a
--- /dev/null
+++ b/board/freescale/t4qds/pci.c
@@ -0,0 +1,39 @@
+/*
+ * Copyright 2007-2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <pci.h>
+#include <asm/fsl_pci.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <asm/fsl_serdes.h>
+
+void pci_init_board(void)
+{
+ fsl_pcie_init_board(0);
+}
+
+void pci_of_setup(void *blob, bd_t *bd)
+{
+ FT_FSL_PCI_SETUP;
+}
diff --git a/board/freescale/t4qds/t4240qds_qixis.h b/board/freescale/t4qds/t4240qds_qixis.h
new file mode 100644
index 0000000..efb718d
--- /dev/null
+++ b/board/freescale/t4qds/t4240qds_qixis.h
@@ -0,0 +1,56 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __T4020QDS_QIXIS_H__
+#define __T4020QDS_QIXIS_H__
+
+/* Definitions of QIXIS Registers for T4020QDS */
+
+/* BRDCFG4[4:7]] select EC1 and EC2 as a pair */
+#define BRDCFG4_EMISEL_MASK 0xE0
+#define BRDCFG4_EMISEL_SHIFT 5
+
+/* SYSCLK */
+#define QIXIS_SYSCLK_66 0x0
+#define QIXIS_SYSCLK_83 0x1
+#define QIXIS_SYSCLK_100 0x2
+#define QIXIS_SYSCLK_125 0x3
+#define QIXIS_SYSCLK_133 0x4
+#define QIXIS_SYSCLK_150 0x5
+#define QIXIS_SYSCLK_160 0x6
+#define QIXIS_SYSCLK_166 0x7
+
+/* DDRCLK */
+#define QIXIS_DDRCLK_66 0x0
+#define QIXIS_DDRCLK_100 0x1
+#define QIXIS_DDRCLK_125 0x2
+#define QIXIS_DDRCLK_133 0x3
+
+#define BRDCFG5_RESET 0x00
+
+#define BRDCFG12_SD3EN_MASK 0x20
+#define BRDCFG12_SD3MX_MASK 0x08
+#define BRDCFG12_SD3MX_SLOT5 0x08
+#define BRDCFG12_SD3MX_SLOT6 0x00
+#define BRDCFG12_SD4EN_MASK 0x04
+#define BRDCFG12_SD4MX_MASK 0x03
+#define BRDCFG12_SD4MX_SLOT7 0x02
+#define BRDCFG12_SD4MX_SLOT8 0x01
+#define BRDCFG12_SD4MX_AURO_SATA 0x00
+#endif
diff --git a/board/freescale/t4qds/t4qds.c b/board/freescale/t4qds/t4qds.c
new file mode 100644
index 0000000..88b8ced
--- /dev/null
+++ b/board/freescale/t4qds/t4qds.c
@@ -0,0 +1,395 @@
+/*
+ * Copyright 2009-2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <i2c.h>
+#include <netdev.h>
+#include <linux/compiler.h>
+#include <asm/mmu.h>
+#include <asm/processor.h>
+#include <asm/cache.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_law.h>
+#include <asm/fsl_serdes.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+#include <fm_eth.h>
+
+#include "../common/qixis.h"
+#include "../common/vsc3316_3308.h"
+#include "t4qds.h"
+#include "t4240qds_qixis.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkboard(void)
+{
+ u8 sw;
+ struct cpu_type *cpu = gd->cpu;
+ ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+ unsigned int i;
+
+ printf("Board: %sQDS, ", cpu->name);
+ printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
+ QIXIS_READ(id), QIXIS_READ(arch), QIXIS_READ(scver));
+
+ sw = QIXIS_READ(brdcfg[0]);
+ sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
+
+ if (sw < 0x8)
+ printf("vBank: %d\n", sw);
+ else if (sw == 0x8)
+ puts("Promjet\n");
+ else if (sw == 0x9)
+ puts("NAND\n");
+ else
+ printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
+
+ /* Display the RCW, so that no one gets confused as to what RCW
+ * we're actually using for this boot.
+ */
+ puts("Reset Configuration Word (RCW):");
+ for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) {
+ u32 rcw = in_be32(&gur->rcwsr[i]);
+
+ if ((i % 4) == 0)
+ printf("\n %08x:", i * 4);
+ printf(" %08x", rcw);
+ }
+ puts("\n");
+
+ /*
+ * Display the actual SERDES reference clocks as configured by the
+ * dip switches on the board. Note that the SWx registers could
+ * technically be set to force the reference clocks to match the
+ * values that the SERDES expects (or vice versa). For now, however,
+ * we just display both values and hope the user notices when they
+ * don't match.
+ */
+ puts("SERDES Reference Clocks: ");
+ sw = QIXIS_READ(brdcfg[2]);
+ for (i = 0; i < MAX_SERDES; i++) {
+ static const char *freq[] = {
+ "100", "125", "156.25", "161.1328125"};
+ unsigned int clock = (sw >> (2 * i)) & 3;
+
+ printf("SERDES%u=%sMHz ", i+1, freq[clock]);
+ }
+ puts("\n");
+
+ return 0;
+}
+
+int select_i2c_ch_pca9547(u8 ch)
+{
+ int ret;
+
+ ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
+ if (ret) {
+ puts("PCA: failed to select proper channel\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+/* Configure Crossbar switches for Front-Side SerDes Ports */
+int config_frontside_crossbar_vsc3316(void)
+{
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 srds_prtcl_s1, srds_prtcl_s2;
+ int ret;
+
+ ret = select_i2c_ch_pca9547(I2C_MUX_CH_VSC3316_FS);
+ if (ret)
+ return ret;
+
+ srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) &
+ FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
+ srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
+ if (srds_prtcl_s1) {
+ ret = vsc3316_config(VSC3316_FSM_TX_ADDR, vsc3316_fsm1_tx, 8);
+ if (ret)
+ return ret;
+ ret = vsc3316_config(VSC3316_FSM_RX_ADDR, vsc3316_fsm1_rx, 8);
+ if (ret)
+ return ret;
+ }
+
+ srds_prtcl_s2 = in_be32(&gur->rcwsr[4]) &
+ FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
+ srds_prtcl_s2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
+ if (srds_prtcl_s2) {
+ ret = vsc3316_config(VSC3316_FSM_TX_ADDR, vsc3316_fsm2_tx, 8);
+ if (ret)
+ return ret;
+ ret = vsc3316_config(VSC3316_FSM_RX_ADDR, vsc3316_fsm2_rx, 8);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+int config_backside_crossbar_mux(void)
+{
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 srds_prtcl_s3, srds_prtcl_s4;
+ u8 brdcfg;
+
+ srds_prtcl_s3 = in_be32(&gur->rcwsr[4]) &
+ FSL_CORENET2_RCWSR4_SRDS3_PRTCL;
+ srds_prtcl_s3 >>= FSL_CORENET2_RCWSR4_SRDS3_PRTCL_SHIFT;
+ switch (srds_prtcl_s3) {
+ case 0:
+ /* SerDes3 is not enabled */
+ break;
+ case 2:
+ case 9:
+ case 10:
+ /* SD3(0:7) => SLOT5(0:7) */
+ brdcfg = QIXIS_READ(brdcfg[12]);
+ brdcfg &= ~BRDCFG12_SD3MX_MASK;
+ brdcfg |= BRDCFG12_SD3MX_SLOT5;
+ QIXIS_WRITE(brdcfg[12], brdcfg);
+ break;
+ case 4:
+ case 6:
+ case 8:
+ case 12:
+ case 14:
+ case 16:
+ case 17:
+ case 19:
+ case 20:
+ /* SD3(4:7) => SLOT6(0:3) */
+ brdcfg = QIXIS_READ(brdcfg[12]);
+ brdcfg &= ~BRDCFG12_SD3MX_MASK;
+ brdcfg |= BRDCFG12_SD3MX_SLOT6;
+ QIXIS_WRITE(brdcfg[12], brdcfg);
+ break;
+ default:
+ printf("WARNING: unsupported for SerDes3 Protocol %d\n",
+ srds_prtcl_s3);
+ return -1;
+ }
+
+ srds_prtcl_s4 = in_be32(&gur->rcwsr[4]) &
+ FSL_CORENET2_RCWSR4_SRDS4_PRTCL;
+ srds_prtcl_s4 >>= FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT;
+ switch (srds_prtcl_s4) {
+ case 0:
+ /* SerDes4 is not enabled */
+ break;
+ case 2:
+ /* 10b, SD4(0:7) => SLOT7(0:7) */
+ brdcfg = QIXIS_READ(brdcfg[12]);
+ brdcfg &= ~BRDCFG12_SD4MX_MASK;
+ brdcfg |= BRDCFG12_SD4MX_SLOT7;
+ QIXIS_WRITE(brdcfg[12], brdcfg);
+ break;
+ case 4:
+ case 6:
+ case 8:
+ /* x1b, SD4(4:7) => SLOT8(0:3) */
+ brdcfg = QIXIS_READ(brdcfg[12]);
+ brdcfg &= ~BRDCFG12_SD4MX_MASK;
+ brdcfg |= BRDCFG12_SD4MX_SLOT8;
+ QIXIS_WRITE(brdcfg[12], brdcfg);
+ break;
+ case 10:
+ case 12:
+ case 14:
+ case 16:
+ case 18:
+ /* 00b, SD4(4:5) => AURORA, SD4(6:7) => SATA */
+ brdcfg = QIXIS_READ(brdcfg[12]);
+ brdcfg &= ~BRDCFG12_SD4MX_MASK;
+ brdcfg |= BRDCFG12_SD4MX_AURO_SATA;
+ QIXIS_WRITE(brdcfg[12], brdcfg);
+ break;
+ default:
+ printf("WARNING: unsupported for SerDes4 Protocol %d\n",
+ srds_prtcl_s4);
+ return -1;
+ }
+
+ return 0;
+}
+
+int board_early_init_r(void)
+{
+ const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
+ const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
+
+ /*
+ * Remap Boot flash + PROMJET region to caching-inhibited
+ * so that flash can be erased properly.
+ */
+
+ /* Flush d-cache and invalidate i-cache of any FLASH data */
+ flush_dcache();
+ invalidate_icache();
+
+ /* invalidate existing TLB entry for flash + promjet */
+ disable_tlb(flash_esel);
+
+ set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, flash_esel, BOOKE_PAGESZ_256M, 1);
+
+ set_liodns();
+#ifdef CONFIG_SYS_DPAA_QBMAN
+ setup_portals();
+#endif
+
+ /* Disable remote I2C connectoin */
+ QIXIS_WRITE(brdcfg[5], BRDCFG5_RESET);
+
+ /* Configure board SERDES ports crossbar */
+ config_frontside_crossbar_vsc3316();
+ config_backside_crossbar_mux();
+ select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+
+ return 0;
+}
+
+unsigned long get_board_sys_clk(void)
+{
+ u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
+
+ switch (sysclk_conf & 0x0F) {
+ case QIXIS_SYSCLK_83:
+ return 83333333;
+ case QIXIS_SYSCLK_100:
+ return 100000000;
+ case QIXIS_SYSCLK_125:
+ return 125000000;
+ case QIXIS_SYSCLK_133:
+ return 133333333;
+ case QIXIS_SYSCLK_150:
+ return 150000000;
+ case QIXIS_SYSCLK_160:
+ return 160000000;
+ case QIXIS_SYSCLK_166:
+ return 166666666;
+ }
+ return 66666666;
+}
+
+unsigned long get_board_ddr_clk(void)
+{
+ u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);
+
+ switch ((ddrclk_conf & 0x30) >> 4) {
+ case QIXIS_DDRCLK_100:
+ return 100000000;
+ case QIXIS_DDRCLK_125:
+ return 125000000;
+ case QIXIS_DDRCLK_133:
+ return 133333333;
+ }
+ return 66666666;
+}
+
+static const char *serdes_clock_to_string(u32 clock)
+{
+ switch (clock) {
+ case SRDS_PLLCR0_RFCK_SEL_100:
+ return "100";
+ case SRDS_PLLCR0_RFCK_SEL_125:
+ return "125";
+ case SRDS_PLLCR0_RFCK_SEL_156_25:
+ return "156.25";
+ case SRDS_PLLCR0_RFCK_SEL_161_13:
+ return "161.1328125";
+ default:
+ return "???";
+ }
+}
+
+int misc_init_r(void)
+{
+ u8 sw;
+ serdes_corenet_t *srds_regs =
+ (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
+ u32 actual[MAX_SERDES];
+ unsigned int i;
+
+ sw = QIXIS_READ(brdcfg[2]);
+ for (i = 0; i < MAX_SERDES; i++) {
+ unsigned int clock = (sw >> (2 * i)) & 3;
+ switch (clock) {
+ case 0:
+ actual[i] = SRDS_PLLCR0_RFCK_SEL_100;
+ break;
+ case 1:
+ actual[i] = SRDS_PLLCR0_RFCK_SEL_125;
+ break;
+ case 2:
+ actual[i] = SRDS_PLLCR0_RFCK_SEL_156_25;
+ break;
+ case 3:
+ actual[i] = SRDS_PLLCR0_RFCK_SEL_161_13;
+ break;
+ }
+ }
+
+ for (i = 0; i < MAX_SERDES; i++) {
+ u32 pllcr0 = srds_regs->bank[i].pllcr0;
+ u32 expected = pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK;
+ if (expected != actual[i]) {
+ printf("Warning: SERDES%u expects reference clock"
+ " %sMHz, but actual is %sMHz\n", i + 1,
+ serdes_clock_to_string(expected),
+ serdes_clock_to_string(actual[i]));
+ }
+ }
+
+ return 0;
+}
+
+void ft_board_setup(void *blob, bd_t *bd)
+{
+ phys_addr_t base;
+ phys_size_t size;
+
+ ft_cpu_setup(blob, bd);
+
+ base = getenv_bootm_low();
+ size = getenv_bootm_size();
+
+ fdt_fixup_memory(blob, (u64)base, (u64)size);
+
+#ifdef CONFIG_PCI
+ pci_of_setup(blob, bd);
+#endif
+
+ fdt_fixup_liodn(blob);
+ fdt_fixup_dr_usb(blob, bd);
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+ fdt_fixup_fman_ethernet(blob);
+ fdt_fixup_board_enet(blob);
+#endif
+}
diff --git a/board/freescale/t4qds/t4qds.h b/board/freescale/t4qds/t4qds.h
new file mode 100644
index 0000000..c6a3492
--- /dev/null
+++ b/board/freescale/t4qds/t4qds.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright 2011-2012 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CORENET_DS_H__
+#define __CORENET_DS_H__
+
+void fdt_fixup_board_enet(void *blob);
+void pci_of_setup(void *blob, bd_t *bd);
+
+static const int8_t vsc3316_fsm1_tx[8][2] = { {0, 0}, {1, 1}, {6, 6}, {7, 7},
+ {8, 8}, {9, 9}, {14, 14}, {15, 15} };
+
+static const int8_t vsc3316_fsm2_tx[8][2] = { {2, 2}, {3, 3}, {4, 4}, {5, 5},
+ {10, 10}, {11, 11}, {12, 12}, {13, 13} };
+
+static const int8_t vsc3316_fsm1_rx[8][2] = { {2, 12}, {3, 13}, {4, 5}, {5, 4},
+ {10, 11}, {11, 10}, {12, 2}, {13, 3} };
+
+static const int8_t vsc3316_fsm2_rx[8][2] = { {0, 15}, {1, 14}, {6, 7}, {7, 6},
+ {8, 9}, {9, 8}, {14, 1}, {15, 0} };
+#endif
diff --git a/board/freescale/t4qds/tlb.c b/board/freescale/t4qds/tlb.c
new file mode 100644
index 0000000..078a6e4
--- /dev/null
+++ b/board/freescale/t4qds/tlb.c
@@ -0,0 +1,136 @@
+/*
+ * Copyright 2008-2012 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+ /* TLB 0 - for temp stack in cache */
+ SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR,
+ CONFIG_SYS_INIT_RAM_ADDR_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
+ CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
+ CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+ SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
+ CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 0, BOOKE_PAGESZ_4K, 0),
+
+ /* TLB 1 */
+ /* *I*** - Covers boot page */
+#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L3_ADDR)
+ /*
+ * *I*G - L3SRAM. When L3 is used as 1M SRAM, the address of the
+ * SRAM is at 0xfff00000, it covered the 0xfffff000.
+ */
+ SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 0, BOOKE_PAGESZ_1M, 1),
+#else
+ SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 0, BOOKE_PAGESZ_4K, 1),
+#endif
+
+ /* *I*G* - CCSRBAR */
+ SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 1, BOOKE_PAGESZ_16M, 1),
+
+ /* *I*G* - Flash, localbus */
+ /* This will be changed to *I*G* after relocation to RAM. */
+ SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
+ MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
+ 0, 2, BOOKE_PAGESZ_256M, 1),
+
+ /* *I*G* - PCI */
+ SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 3, BOOKE_PAGESZ_1G, 1),
+
+ /* *I*G* - PCI */
+ SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x40000000,
+ CONFIG_SYS_PCIE1_MEM_PHYS + 0x40000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 4, BOOKE_PAGESZ_256M, 1),
+
+ SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x50000000,
+ CONFIG_SYS_PCIE1_MEM_PHYS + 0x50000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 5, BOOKE_PAGESZ_256M, 1),
+
+ /* *I*G* - PCI I/O */
+ SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 6, BOOKE_PAGESZ_256K, 1),
+
+ /* Bman/Qman */
+#ifdef CONFIG_SYS_BMAN_MEM_PHYS
+ SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE, CONFIG_SYS_BMAN_MEM_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 9, BOOKE_PAGESZ_16M, 1),
+ SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE + 0x01000000,
+ CONFIG_SYS_BMAN_MEM_PHYS + 0x01000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 10, BOOKE_PAGESZ_16M, 1),
+#endif
+#ifdef CONFIG_SYS_QMAN_MEM_PHYS
+ SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE, CONFIG_SYS_QMAN_MEM_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 11, BOOKE_PAGESZ_16M, 1),
+ SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE + 0x01000000,
+ CONFIG_SYS_QMAN_MEM_PHYS + 0x01000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 12, BOOKE_PAGESZ_16M, 1),
+#endif
+#ifdef CONFIG_SYS_DCSRBAR_PHYS
+ SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 13, BOOKE_PAGESZ_4M, 1),
+#endif
+#ifdef CONFIG_SYS_NAND_BASE
+ /*
+ * *I*G - NAND
+ * entry 14 and 15 has been used hard coded, they will be disabled
+ * in cpu_init_f, so we use entry 16 for nand.
+ */
+ SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 16, BOOKE_PAGESZ_1M, 1),
+#endif
+ SET_TLB_ENTRY(1, QIXIS_BASE, QIXIS_BASE_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 17, BOOKE_PAGESZ_4K, 1),
+
+};
+
+int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/boards.cfg b/boards.cfg
index 83e7084..3e19647 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -838,6 +838,9 @@ BSC9131RDB_SPIFLASH powerpc mpc85xx bsc9131rdb freesca
stxgp3 powerpc mpc85xx stxgp3 stx
stxssa powerpc mpc85xx stxssa stx - stxssa
stxssa_4M powerpc mpc85xx stxssa stx - stxssa:STXSSA_4M
+T4240QDS powerpc mpc85xx t4qds freescale
+T4240QDS_SDCARD powerpc mpc85xx t4qds freescale - T4240QDS:RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000
+T4240QDS_SPIFLASH powerpc mpc85xx t4qds freescale - T4240QDS:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000
xpedite520x powerpc mpc85xx - xes
xpedite537x powerpc mpc85xx - xes
xpedite550x powerpc mpc85xx - xes
diff --git a/doc/README.VSC3316-3308 b/doc/README.VSC3316-3308
new file mode 100644
index 0000000..925663b
--- /dev/null
+++ b/doc/README.VSC3316-3308
@@ -0,0 +1,43 @@
+This file contains API information of the initialization code written for
+Vitesse cross-point devices, VSC3316 and VSC3308 for board B4860QDS
+
+Author: Shaveta Leekha <shaveta@freescale.com>
+
+About Device:
+=============
+VSC 3316/3308 is a low-power, low-cost asynchronous crosspoint switch capable of data rates upto 11.5Gbps.
+
+VSC3316 has 16 input and 16 output ports whereas VSC3308 has 8 input and 8 output ports. Programming of these devices are performed by two-wire or four-wire serial interface.
+
+Initialization:
+===============
+On reset, VSC devices are in low-power state with all inputs, outputs and connections in an off state.
+First thing required is to program it to interface with either two-wire or four-wire interface.
+In our case the interface is two-wire I2C serial interface. So the value in Interface mode register at address 79.h to be written is 0x02 for two-wire interface. Also for crosspoint connections to be activated, 01.h value need to be written in 75.h (core configuration register).
+
+API Overview:
+=============
+
+ vsc_if_enable(u8 vsc_addr):
+ --------------------------
+ This API programs VSC to interface with either two-wire or four-wire interface. In our case the interface is two-wire I2C serial interface. So the value in Interface mode register at address 79.h to be written is 0x02 for two-wire interface.
+ Parameters:
+ vsc_addr - Address of the VSC device on board.
+
+
+ vsc3316_config(u8 vsc_addr, int con_arr[][2], u8 num_con):
+ ---------------------------------------------------------
+ This API configures the VSC3316 device for required connections. Connection through the VSC device requires the inputs and outputs to be properly configured.
+ Connection registers are on page 00. It Configures the selected input and output correctly and join them to make a connection. It also program Input state register, Global input ISE, Global input LOS, Global core control, Output mode register and core control registers etc.
+ vsc3308_config(u8 vsc_addr, int con_arr[][2], u8 num_con) does the essential configurations for VSC3308.
+
+ Parameters:
+ vsc_addr - Address of the VSC device on board.
+ con_arr - connection array
+ num_con - number of connections to be configured
+
+ vsc_wp_config(u8 vsc_addr):
+ --------------------------
+ For crosspoint connections to be activated, 01.h value need to be written in 75.h (core configuration register), which is done by this API.
+ Parameters:
+ vsc_addr - Address of the VSC device on board.
diff --git a/doc/README.fsl-ddr b/doc/README.fsl-ddr
index f94b56f..3992640 100644
--- a/doc/README.fsl-ddr
+++ b/doc/README.fsl-ddr
@@ -103,6 +103,11 @@ The ways to configure the ddr interleaving mode
# bank(chip-select) interleaving (cs0+cs1+cs2+cs3) (4x1)
setenv hwconfig "fsl_ddr:bank_intlv=cs0_cs1_cs2_cs3"
+ # bank(chip-select) interleaving (auto)
+ setenv hwconfig "fsl_ddr:bank_intlv=auto"
+ This auto mode only select from cs0_cs1_cs2_cs3, cs0_cs1, null dependings
+ on DIMMs.
+
Memory controller address hashing
==================================
If the DDR controller supports address hashing, it can be enabled by hwconfig.
diff --git a/doc/README.mpc85xx-spin-table b/doc/README.mpc85xx-spin-table
new file mode 100644
index 0000000..8da768a
--- /dev/null
+++ b/doc/README.mpc85xx-spin-table
@@ -0,0 +1,26 @@
+Spin table in cache
+=====================================
+As specified by ePAPR v1.1, the spin table needs to be in cached memory. After
+DDR is initialized and U-boot relocates itself into DDR, the spin table is
+accessible for core 0. It is part of release.S, within 4KB range after
+__secondary_start_page. For other cores to use the spin table, the booting
+process is described below:
+
+Core 0 sets up the reset page on the top 4K of memory (or 4GB if total memory
+is more than 4GB), and creates a TLB to map it to 0xffff_f000, regardless of
+the physical address of this page, with WIMGE=0b01010. Core 0 also enables boot
+page translation for secondary cores to use this page of memory. Then 4KB
+memory is copied from __secondary_start_page to the boot page, after flusing
+cache because this page is mapped as normal DDR. Before copying the reset page,
+core 0 puts the physical address of the spin table (which is in release.S and
+relocated to the top of mapped memory) into a variable __spin_table_addr so
+that secondary cores can see it.
+
+When secondary cores boot up from 0xffff_f000 page, they only have one default
+TLB. While booting, they set up another TLB in AS=1 space and jump into
+the new space. The new TLB covers the physical address of the spin table page,
+with WIMGE =0b00100. Now secondary cores can keep polling the spin table
+without stress DDR bus because both the code and the spin table is in cache.
+
+For the above to work, DDR has to set the 'M' bit of WIMGE, in order to keep
+cache coherence.
diff --git a/doc/README.t4240qds b/doc/README.t4240qds
new file mode 100644
index 0000000..677d120
--- /dev/null
+++ b/doc/README.t4240qds
@@ -0,0 +1,98 @@
+Overview
+--------
+The T4240QDS is a high-performance computing evaluation, development and test
+platform supporting the T4240 QorIQ™ Power Architecture™ processor. T4240QDS is
+optimized to support the high-bandwidth DDR3 memory ports, as well as the
+highly-configurable SerDes ports. The system is lead-free and RoHS-compliant.
+
+Board Features
+ SERDES Connections
+ 32 lanes grouped into four 8-lane banks
+ Two “front side” banks dedicated to Ethernet
+ - High-speed crosspoint switch fabric on selected lanes
+ - Two PCI Express slots with side-band connector supporting
+ - SGMII
+ - XAUI
+ - HiGig
+ - I-pass connectors allow board-to-board and loopback support
+ Two “back side” banks dedicated to other protocols
+ - High-speed crosspoint switch fabric on all lanes
+ - Four PCI Express slots with side-band connector supporting
+ - PCI Express 3.0
+ - SATA 2.0
+ - SRIO 2.0
+ - Supports 4X Aurora debug with two connectors
+ DDR Controllers
+ Three independant 64-bit DDR3 controllers
+ Supports rates of 1866 up to 2133 MHz data-rate
+ Supports two DDR3/DDR3LP UDIMM/RDIMMs per controller
+ DDR power supplies 1.5V to all devices with automatic tracking of VTT.
+ Power software-switchable to 1.35V if software detects all DDR3LP devices.
+ MT9JSF25672AZ-2G1KZESZF has been tested at 1333, 1600, 1867, 2000 and
+ 2133MT/s speeds. For 1867MT/s and above, read-to-write turnaround time
+ increases by 1 clock.
+
+ IFC/Local Bus
+ NAND flash: 8-bit, async or sync, up to 2GB.
+ NOR: 16-bit, Address/Data Multiplexed (ADM), up to 128 MB
+ NOR: 8-bit or 16-bit, non-multiplexed, up to 512MB
+ - NOR devices support 16 virtual banks
+ GASIC: Minimal target within Qixis FPGA
+ PromJET rapid memory download support
+ Address demultiplexing handled within FPGA.
+ - Flexible demux allows 8 or 16 bit evaluation.
+ IFC Debug/Development card
+ - Support for 32-bit devices
+ Ethernet
+ Support two on-board RGMII 10/100/1G ethernet ports.
+ SGMII and XAUI support via SERDES block (see above).
+ 1588 support via Symmetricom board.
+ QIXIS System Logic FPGA
+ Manages system power and reset sequencing
+ Manages DUT, board, clock, etc. configuration for dynamic shmoo
+ Collects V-I-T data in background for code/power profiling.
+ Supports legacy TMT test features (POSt, IRS, SYSCLK-synchronous assertion)
+ General fault monitoring and logging
+ Runs from ATX “hot” power rails allowing operation while system is off.
+ Clocks
+ System and DDR clock (SYSCLK, “DDRCLK”)
+ - Switch selectable to one of 16 common settings in the interval 33MHz-166MHz.
+ - Software selectable in 1MHz increments from 1-200MHz.
+ SERDES clocks
+ - Provides clocks to all SerDes blocks and slots
+ - 100, 125 and 156.25 MHz
+ Power Supplies
+ Dedicated regulators for VDD
+ - Adjustable from (0.7V to 1.3V at 80A
+ - Regulators can be controlled by VID and/or software
+ Dedicated regulator for GVDD_PL: 1.35/1.5V at 22A
+ - VTT/MVREF automatically track operating voltage
+ Dedicated regulators/filters for AVDD supplies
+ Dedicated regulators for other supplies: OVDD, BVDD, DVDD, LVDD, POVDD, etc.
+ USB
+ Supports two USB 2.0 ports with integrated PHYs
+ - One type A, one type micro-AB with 1.0A power per port.
+ Other IO
+ eSDHC/MMC
+ - SDHC card slot
+ eSPI port
+ - High-speed serial flash
+ Two Serial port
+ Four I2C ports
+
+Memory map
+----------
+The addresses in brackets are physical addresses.
+
+0x0_0000_0000 (0x0_0000_0000) - 0x0_7fff_ffff 2GB DDR (more than 2GB is initialized but not mapped under with TLB)
+0x0_8000_0000 (0xc_0000_0000) - 0x0_dfff_ffff 1.5GB PCIE memory
+0x0_f000_0000 (0xf_0000_0000) - 0x0_f03f_ffff 4MB DCSR
+0x0_f400_0000 (0xf_f400_0000) - 0x0_f5ff_ffff 32MB BMan
+0x0_f600_0000 (0xf_f600_0000) - 0x0_f7ff_ffff 32MB QMan
+0x0_f800_0000 (0xf_f800_0000) - 0x0_f803_ffff 256KB PCIE IO
+0x0_e000_0000 (0xf_e000_0000) - 0x0_efff_ffff 256MB NOR flash
+0x0_fe00_0000 (0xf_fe00_0000) - 0x0_feff_ffff 16MB CCSR
+0x0_ffdf_0000 (0xf_ffdf_0000) - 0x0_ffdf_03ff 4KB QIXIS
+0x0_ffff_f000 (0x0_7fff_fff0) - 0x0_ffff_ffff 4KB Boot page translation for secondary cores
+
+The physical address of the last (boot page translation) varies with the actual DDR size.
diff --git a/drivers/net/fm/Makefile b/drivers/net/fm/Makefile
index cc57354..7a1fcdd 100644
--- a/drivers/net/fm/Makefile
+++ b/drivers/net/fm/Makefile
@@ -32,6 +32,10 @@ COBJS-y += init.o
COBJS-y += tgec.o
COBJS-y += tgec_phy.o
+# Soc have FMAN v3 with mEMAC
+COBJS-$(CONFIG_SYS_FMAN_V3) += memac_phy.o
+COBJS-$(CONFIG_SYS_FMAN_V3) += memac.o
+
# SoC specific SERDES support
COBJS-$(CONFIG_P1017) += p1023.o
COBJS-$(CONFIG_P1023) += p1023.o
@@ -40,6 +44,8 @@ COBJS-$(CONFIG_PPC_P2041) += p5020.o
COBJS-$(CONFIG_PPC_P3041) += p5020.o
COBJS-$(CONFIG_PPC_P4080) += p4080.o
COBJS-$(CONFIG_PPC_P5020) += p5020.o
+COBJS-$(CONFIG_PPC_T4240) += t4240.o
+COBJS-$(CONFIG_PPC_B4860) += b4860.o
endif
COBJS := $(COBJS-y)
diff --git a/drivers/net/fm/eth.c b/drivers/net/fm/eth.c
index 2b616ad..82c787b 100644
--- a/drivers/net/fm/eth.c
+++ b/drivers/net/fm/eth.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ * Copyright 2009-2012 Freescale Semiconductor, Inc.
* Dave Liu <daveliu@freescale.com>
*
* This program is free software; you can redistribute it and/or
@@ -28,6 +28,7 @@
#include <phy.h>
#include <asm/fsl_dtsec.h>
#include <asm/fsl_tgec.h>
+#include <asm/fsl_memac.h>
#include "fm.h"
@@ -47,6 +48,28 @@ static int num_controllers;
/* Configure the TBI for SGMII operation */
void dtsec_configure_serdes(struct fm_eth *priv)
{
+#ifdef CONFIG_SYS_FMAN_V3
+ u32 value;
+ struct mii_dev bus;
+ bus.priv = priv->mac->phyregs;
+
+ /* SGMII IF mode + AN enable */
+ value = PHY_SGMII_IF_MODE_AN | PHY_SGMII_IF_MODE_SGMII;
+ memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0x14, value);
+
+ /* Dev ability according to SGMII specification */
+ value = PHY_SGMII_DEV_ABILITY_SGMII;
+ memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0x4, value);
+
+ /* Adjust link timer for SGMII -
+ 1.6 ms in units of 8 ns = 2 * 10^5 = 0x30d40 */
+ memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0x13, 0x3);
+ memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0x12, 0xd40);
+
+ /* Restart AN */
+ value = PHY_SGMII_CR_DEF_VAL | PHY_SGMII_CR_RESET_AN;
+ memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0, value);
+#else
struct dtsec *regs = priv->mac->base;
struct tsec_mii_mng *phyregs = priv->mac->phyregs;
@@ -60,15 +83,18 @@ void dtsec_configure_serdes(struct fm_eth *priv)
TBIANA_SGMII_ACK);
tsec_local_mdio_write(phyregs, in_be32(&regs->tbipa), 0,
TBI_CR, TBICR_SETTINGS);
+#endif
}
static void dtsec_init_phy(struct eth_device *dev)
{
struct fm_eth *fm_eth = dev->priv;
- struct dtsec *regs = (struct dtsec *)fm_eth->mac->base;
+#ifndef CONFIG_SYS_FMAN_V3
+ struct dtsec *regs = (struct dtsec *)CONFIG_SYS_FSL_FM1_DTSEC1_ADDR;
/* Assign a Physical address to the TBI */
out_be32(&regs->tbipa, CONFIG_SYS_TBIPA_VALUE);
+#endif
if (fm_eth->enet_if == PHY_INTERFACE_MODE_SGMII)
dtsec_configure_serdes(fm_eth);
@@ -541,6 +567,10 @@ static int fm_eth_init_mac(struct fm_eth *fm_eth, struct ccsr_fman *reg)
num = fm_eth->num;
+#ifdef CONFIG_SYS_FMAN_V3
+ base = &reg->memac[num].fm_memac;
+ phyregs = &reg->memac[num].fm_memac_mdio;
+#else
/* Get the mac registers base address */
if (fm_eth->type == FM_ETH_1G_E) {
base = &reg->mac_1g[num].fm_dtesc;
@@ -549,6 +579,7 @@ static int fm_eth_init_mac(struct fm_eth *fm_eth, struct ccsr_fman *reg)
base = &reg->mac_10g[num].fm_10gec;
phyregs = &reg->mac_10g[num].fm_10gec_mdio;
}
+#endif
/* alloc mac controller */
mac = malloc(sizeof(struct fsl_enet_mac));
@@ -559,10 +590,14 @@ static int fm_eth_init_mac(struct fm_eth *fm_eth, struct ccsr_fman *reg)
/* save the mac to fm_eth struct */
fm_eth->mac = mac;
+#ifdef CONFIG_SYS_FMAN_V3
+ init_memac(mac, base, phyregs, MAX_RXBUF_LEN);
+#else
if (fm_eth->type == FM_ETH_1G_E)
init_dtsec(mac, base, phyregs, MAX_RXBUF_LEN);
else
init_tgec(mac, base, phyregs, MAX_RXBUF_LEN);
+#endif
return 1;
}
diff --git a/drivers/net/fm/init.c b/drivers/net/fm/init.c
index 736b8b9..ae389b8 100644
--- a/drivers/net/fm/init.c
+++ b/drivers/net/fm/init.c
@@ -38,6 +38,15 @@ struct fm_eth_info fm_info[] = {
#if (CONFIG_SYS_NUM_FM1_DTSEC >= 5)
FM_DTSEC_INFO_INITIALIZER(1, 5),
#endif
+#if (CONFIG_SYS_NUM_FM1_DTSEC >= 6)
+ FM_DTSEC_INFO_INITIALIZER(1, 6),
+#endif
+#if (CONFIG_SYS_NUM_FM1_DTSEC >= 7)
+ FM_DTSEC_INFO_INITIALIZER(1, 9),
+#endif
+#if (CONFIG_SYS_NUM_FM1_DTSEC >= 8)
+ FM_DTSEC_INFO_INITIALIZER(1, 10),
+#endif
#if (CONFIG_SYS_NUM_FM2_DTSEC >= 1)
FM_DTSEC_INFO_INITIALIZER(2, 1),
#endif
@@ -53,6 +62,15 @@ struct fm_eth_info fm_info[] = {
#if (CONFIG_SYS_NUM_FM2_DTSEC >= 5)
FM_DTSEC_INFO_INITIALIZER(2, 5),
#endif
+#if (CONFIG_SYS_NUM_FM2_DTSEC >= 6)
+ FM_DTSEC_INFO_INITIALIZER(2, 6),
+#endif
+#if (CONFIG_SYS_NUM_FM2_DTSEC >= 7)
+ FM_DTSEC_INFO_INITIALIZER(2, 9),
+#endif
+#if (CONFIG_SYS_NUM_FM2_DTSEC >= 8)
+ FM_DTSEC_INFO_INITIALIZER(2, 10),
+#endif
#if (CONFIG_SYS_NUM_FM1_10GEC >= 1)
FM_TGEC_INFO_INITIALIZER(1, 1),
#endif
diff --git a/drivers/net/fm/memac.c b/drivers/net/fm/memac.c
new file mode 100644
index 0000000..32c7054
--- /dev/null
+++ b/drivers/net/fm/memac.c
@@ -0,0 +1,132 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Roy Zang <tie-fei.zang@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* MAXFRM - maximum frame length */
+#define MAXFRM_MASK 0x0000ffff
+
+#include <common.h>
+#include <phy.h>
+#include <asm/types.h>
+#include <asm/io.h>
+#include <asm/fsl_enet.h>
+#include <asm/fsl_memac.h>
+
+#include "fm.h"
+
+static void memac_init_mac(struct fsl_enet_mac *mac)
+{
+ struct memac *regs = mac->base;
+
+ /* mask all interrupt */
+ out_be32(&regs->imask, IMASK_MASK_ALL);
+
+ /* clear all events */
+ out_be32(&regs->ievent, IEVENT_CLEAR_ALL);
+
+ /* set the max receive length */
+ out_be32(&regs->maxfrm, mac->max_rx_len & MAXFRM_MASK);
+
+ /* multicast frame reception for the hash entry disable */
+ out_be32(&regs->hashtable_ctrl, 0);
+}
+
+static void memac_enable_mac(struct fsl_enet_mac *mac)
+{
+ struct memac *regs = mac->base;
+
+ setbits_be32(&regs->command_config, MEMAC_CMD_CFG_RXTX_EN);
+}
+
+static void memac_disable_mac(struct fsl_enet_mac *mac)
+{
+ struct memac *regs = mac->base;
+
+ clrbits_be32(&regs->command_config, MEMAC_CMD_CFG_RXTX_EN);
+}
+
+static void memac_set_mac_addr(struct fsl_enet_mac *mac, u8 *mac_addr)
+{
+ struct memac *regs = mac->base;
+ u32 mac_addr0, mac_addr1;
+
+ /*
+ * if a station address of 0x12345678ABCD, perform a write to
+ * MAC_ADDR0 of 0x78563412, MAC_ADDR1 of 0x0000CDAB
+ */
+ mac_addr0 = (mac_addr[3] << 24) | (mac_addr[2] << 16) | \
+ (mac_addr[1] << 8) | (mac_addr[0]);
+ out_be32(&regs->mac_addr_0, mac_addr0);
+
+ mac_addr1 = ((mac_addr[5] << 8) | mac_addr[4]) & 0x0000ffff;
+ out_be32(&regs->mac_addr_1, mac_addr1);
+}
+
+static void memac_set_interface_mode(struct fsl_enet_mac *mac,
+ phy_interface_t type, int speed)
+{
+ /* Roy need more work here */
+
+ struct memac *regs = mac->base;
+ u32 if_mode, if_status;
+
+ /* clear all bits relative with interface mode */
+ if_mode = in_be32(&regs->if_mode);
+ if_status = in_be32(&regs->if_status);
+
+ /* set interface mode */
+ switch (type) {
+ case PHY_INTERFACE_MODE_GMII:
+ if_mode &= ~IF_MODE_MASK;
+ if_mode |= IF_MODE_GMII;
+ break;
+ case PHY_INTERFACE_MODE_RGMII:
+ if_mode |= (IF_MODE_GMII | IF_MODE_RG);
+ break;
+ case PHY_INTERFACE_MODE_RMII:
+ if_mode |= (IF_MODE_GMII | IF_MODE_RM);
+ break;
+ case PHY_INTERFACE_MODE_SGMII:
+ if_mode &= ~IF_MODE_MASK;
+ if_mode |= (IF_MODE_GMII);
+ break;
+ default:
+ break;
+ }
+ /* Enable automatic speed selection */
+ if_mode |= IF_MODE_EN_AUTO;
+
+ debug(" %s, if_mode = %x\n", __func__, if_mode);
+ debug(" %s, if_status = %x\n", __func__, if_status);
+ out_be32(&regs->if_mode, if_mode);
+ return;
+}
+
+void init_memac(struct fsl_enet_mac *mac, void *base,
+ void *phyregs, int max_rx_len)
+{
+ mac->base = base;
+ mac->phyregs = phyregs;
+ mac->max_rx_len = max_rx_len;
+ mac->init_mac = memac_init_mac;
+ mac->enable_mac = memac_enable_mac;
+ mac->disable_mac = memac_disable_mac;
+ mac->set_mac_addr = memac_set_mac_addr;
+ mac->set_if_mode = memac_set_interface_mode;
+}
diff --git a/drivers/net/fm/memac_phy.c b/drivers/net/fm/memac_phy.c
new file mode 100644
index 0000000..ea6118b
--- /dev/null
+++ b/drivers/net/fm/memac_phy.c
@@ -0,0 +1,150 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Andy Fleming <afleming@freescale.com>
+ * Roy Zang <tie-fei.zang@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ * Some part is taken from tsec.c
+ */
+#include <common.h>
+#include <miiphy.h>
+#include <phy.h>
+#include <asm/io.h>
+#include <asm/fsl_memac.h>
+#include <fm_eth.h>
+
+/*
+ * Write value to the PHY for this device to the register at regnum, waiting
+ * until the write is done before it returns. All PHY configuration has to be
+ * done through the TSEC1 MIIM regs
+ */
+int memac_mdio_write(struct mii_dev *bus, int port_addr, int dev_addr,
+ int regnum, u16 value)
+{
+ u32 mdio_ctl;
+ struct memac_mdio_controller *regs = bus->priv;
+ u32 c45 = 1; /* Default to 10G interface */
+
+ if (dev_addr == MDIO_DEVAD_NONE) {
+ c45 = 0; /* clause 22 */
+ dev_addr = regnum & 0x1f;
+ clrbits_be32(&regs->mdio_stat, MDIO_STAT_ENC);
+ } else {
+ setbits_be32(&regs->mdio_stat, MDIO_STAT_ENC);
+ setbits_be32(&regs->mdio_stat, MDIO_STAT_HOLD_15_CLK);
+ }
+
+ /* Wait till the bus is free */
+ while ((in_be32(&regs->mdio_stat)) & MDIO_STAT_BSY)
+ ;
+
+ /* Set the port and dev addr */
+ mdio_ctl = MDIO_CTL_PORT_ADDR(port_addr) | MDIO_CTL_DEV_ADDR(dev_addr);
+ out_be32(&regs->mdio_ctl, mdio_ctl);
+
+ /* Set the register address */
+ if (c45)
+ out_be32(&regs->mdio_addr, regnum & 0xffff);
+
+ /* Wait till the bus is free */
+ while ((in_be32(&regs->mdio_stat)) & MDIO_STAT_BSY)
+ ;
+
+ /* Write the value to the register */
+ out_be32(&regs->mdio_data, MDIO_DATA(value));
+
+ /* Wait till the MDIO write is complete */
+ while ((in_be32(&regs->mdio_data)) & MDIO_DATA_BSY)
+ ;
+
+ return 0;
+}
+
+/*
+ * Reads from register regnum in the PHY for device dev, returning the value.
+ * Clears miimcom first. All PHY configuration has to be done through the
+ * TSEC1 MIIM regs
+ */
+int memac_mdio_read(struct mii_dev *bus, int port_addr, int dev_addr,
+ int regnum)
+{
+ u32 mdio_ctl;
+ struct memac_mdio_controller *regs = bus->priv;
+ u32 c45 = 1;
+
+ if (dev_addr == MDIO_DEVAD_NONE) {
+ c45 = 0; /* clause 22 */
+ dev_addr = regnum & 0x1f;
+ clrbits_be32(&regs->mdio_stat, MDIO_STAT_ENC);
+ } else {
+ setbits_be32(&regs->mdio_stat, MDIO_STAT_ENC);
+ setbits_be32(&regs->mdio_stat, MDIO_STAT_HOLD_15_CLK);
+ }
+
+ /* Wait till the bus is free */
+ while ((in_be32(&regs->mdio_stat)) & MDIO_STAT_BSY)
+ ;
+
+ /* Set the Port and Device Addrs */
+ mdio_ctl = MDIO_CTL_PORT_ADDR(port_addr) | MDIO_CTL_DEV_ADDR(dev_addr);
+ out_be32(&regs->mdio_ctl, mdio_ctl);
+
+ /* Set the register address */
+ if (c45)
+ out_be32(&regs->mdio_addr, regnum & 0xffff);
+
+ /* Wait till the bus is free */
+ while ((in_be32(&regs->mdio_stat)) & MDIO_STAT_BSY)
+ ;
+
+ /* Initiate the read */
+ mdio_ctl |= MDIO_CTL_READ;
+ out_be32(&regs->mdio_ctl, mdio_ctl);
+
+ /* Wait till the MDIO write is complete */
+ while ((in_be32(&regs->mdio_data)) & MDIO_DATA_BSY)
+ ;
+
+ /* Return all Fs if nothing was there */
+ if (in_be32(&regs->mdio_stat) & MDIO_STAT_RD_ER)
+ return 0xffff;
+
+ return in_be32(&regs->mdio_data) & 0xffff;
+}
+
+int memac_mdio_reset(struct mii_dev *bus)
+{
+ return 0;
+}
+
+int fm_memac_mdio_init(bd_t *bis, struct memac_mdio_info *info)
+{
+ struct mii_dev *bus = mdio_alloc();
+
+ if (!bus) {
+ printf("Failed to allocate FM TGEC MDIO bus\n");
+ return -1;
+ }
+
+ bus->read = memac_mdio_read;
+ bus->write = memac_mdio_write;
+ bus->reset = memac_mdio_reset;
+ sprintf(bus->name, info->name);
+
+ bus->priv = info->regs;
+
+ return mdio_register(bus);
+}
diff --git a/drivers/net/fm/t4240.c b/drivers/net/fm/t4240.c
new file mode 100644
index 0000000..48c530c
--- /dev/null
+++ b/drivers/net/fm/t4240.c
@@ -0,0 +1,128 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Roy Zang <tie-fei.zang@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <phy.h>
+#include <fm_eth.h>
+#include <asm/io.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_serdes.h>
+
+u32 port_to_devdisr[] = {
+ [FM1_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC1_1,
+ [FM1_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC1_2,
+ [FM1_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC1_3,
+ [FM1_DTSEC4] = FSL_CORENET_DEVDISR2_DTSEC1_4,
+ [FM1_DTSEC5] = FSL_CORENET_DEVDISR2_DTSEC1_5,
+ [FM1_DTSEC6] = FSL_CORENET_DEVDISR2_DTSEC1_6,
+ [FM1_DTSEC9] = FSL_CORENET_DEVDISR2_DTSEC1_9,
+ [FM1_DTSEC10] = FSL_CORENET_DEVDISR2_DTSEC1_10,
+ [FM1_10GEC1] = FSL_CORENET_DEVDISR2_10GEC1_1,
+ [FM1_10GEC2] = FSL_CORENET_DEVDISR2_10GEC1_2,
+ [FM2_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC2_1,
+ [FM2_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC2_2,
+ [FM2_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC2_3,
+ [FM2_DTSEC4] = FSL_CORENET_DEVDISR2_DTSEC2_4,
+ [FM2_DTSEC5] = FSL_CORENET_DEVDISR2_DTSEC2_5,
+ [FM2_DTSEC6] = FSL_CORENET_DEVDISR2_DTSEC2_6,
+ [FM2_DTSEC9] = FSL_CORENET_DEVDISR2_DTSEC2_9,
+ [FM2_DTSEC10] = FSL_CORENET_DEVDISR2_DTSEC2_10,
+ [FM2_10GEC1] = FSL_CORENET_DEVDISR2_10GEC2_1,
+ [FM2_10GEC2] = FSL_CORENET_DEVDISR2_10GEC2_2,
+};
+
+static int is_device_disabled(enum fm_port port)
+{
+ ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 devdisr2 = in_be32(&gur->devdisr2);
+
+ return port_to_devdisr[port] & devdisr2;
+}
+
+void fman_disable_port(enum fm_port port)
+{
+ ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+
+ setbits_be32(&gur->devdisr2, port_to_devdisr[port]);
+}
+
+phy_interface_t fman_port_enet_if(enum fm_port port)
+{
+ ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 rcwsr13 = in_be32(&gur->rcwsr[13]);
+
+ if (is_device_disabled(port))
+ return PHY_INTERFACE_MODE_NONE;
+
+ if ((port == FM1_10GEC1 || port == FM1_10GEC2)
+ && (is_serdes_configured(XAUI_FM1)))
+ return PHY_INTERFACE_MODE_XGMII;
+
+ if ((port == FM2_10GEC1 || port == FM2_10GEC2)
+ && (is_serdes_configured(XAUI_FM2)))
+ return PHY_INTERFACE_MODE_XGMII;
+
+#define FSL_CORENET_RCWSR13_EC1 0x60000000 /* bits 417..418 */
+#define FSL_CORENET_RCWSR13_EC1_FM2_DTSEC5_RGMII 0x00000000
+#define FSL_CORENET_RCWSR13_EC1_FM2_GPIO 0x40000000
+#define FSL_CORENET_RCWSR13_EC2 0x18000000 /* bits 419..420 */
+#define FSL_CORENET_RCWSR13_EC2_FM1_DTSEC5_RGMII 0x00000000
+#define FSL_CORENET_RCWSR13_EC2_FM2_DTSEC6_RGMII 0x08000000
+#define FSL_CORENET_RCWSR13_EC2_FM1_GPIO 0x10000000
+ /* handle RGMII first */
+ if ((port == FM2_DTSEC5) && ((rcwsr13 & FSL_CORENET_RCWSR13_EC1) ==
+ FSL_CORENET_RCWSR13_EC1_FM2_DTSEC5_RGMII))
+ return PHY_INTERFACE_MODE_RGMII;
+
+ if ((port == FM1_DTSEC5) && ((rcwsr13 & FSL_CORENET_RCWSR13_EC2) ==
+ FSL_CORENET_RCWSR13_EC2_FM1_DTSEC5_RGMII))
+ return PHY_INTERFACE_MODE_RGMII;
+
+ if ((port == FM2_DTSEC6) && ((rcwsr13 & FSL_CORENET_RCWSR13_EC2) ==
+ FSL_CORENET_RCWSR13_EC2_FM2_DTSEC6_RGMII))
+ return PHY_INTERFACE_MODE_RGMII;
+ switch (port) {
+ case FM1_DTSEC1:
+ case FM1_DTSEC2:
+ case FM1_DTSEC3:
+ case FM1_DTSEC4:
+ case FM1_DTSEC5:
+ case FM1_DTSEC6:
+ case FM1_DTSEC9:
+ case FM1_DTSEC10:
+ if (is_serdes_configured(SGMII_FM1_DTSEC1 + port - FM1_DTSEC1))
+ return PHY_INTERFACE_MODE_SGMII;
+ break;
+ case FM2_DTSEC1:
+ case FM2_DTSEC2:
+ case FM2_DTSEC3:
+ case FM2_DTSEC4:
+ case FM2_DTSEC5:
+ case FM2_DTSEC6:
+ case FM2_DTSEC9:
+ case FM2_DTSEC10:
+ if (is_serdes_configured(SGMII_FM2_DTSEC1 + port - FM2_DTSEC1))
+ return PHY_INTERFACE_MODE_SGMII;
+ break;
+ default:
+ return PHY_INTERFACE_MODE_NONE;
+ }
+
+ return PHY_INTERFACE_MODE_NONE;
+}
diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c
index 0d46c96..48ae163 100644
--- a/drivers/pci/fsl_pci_init.c
+++ b/drivers/pci/fsl_pci_init.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2007-2011 Freescale Semiconductor, Inc.
+ * Copyright 2007-2012 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
@@ -211,7 +211,7 @@ static int fsl_pci_setup_inbound_windows(struct pci_controller *hose,
return 1;
}
-#ifdef CONFIG_FSL_CORENET
+#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER
static void fsl_pcie_boot_master(pit_t *pi)
{
/* configure inbound window for slave's u-boot image */
@@ -276,14 +276,18 @@ static void fsl_pcie_boot_master_release_slave(int port)
release_addr = CONFIG_SYS_PCIE1_MEM_VIRT
+ CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET;
break;
+#ifdef CONFIG_SYS_PCIE2_MEM_VIRT
case 2:
release_addr = CONFIG_SYS_PCIE2_MEM_VIRT
+ CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET;
break;
+#endif
+#ifdef CONFIG_SYS_PCIE3_MEM_VIRT
case 3:
release_addr = CONFIG_SYS_PCIE3_MEM_VIRT
+ CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET;
break;
+#endif
default:
release_addr = 0;
break;
@@ -384,7 +388,7 @@ void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info)
/* see if we are a PCIe or PCI controller */
pci_hose_read_config_byte(hose, dev, FSL_PCIE_CAP_ID, &pcie_cap);
-#ifdef CONFIG_FSL_CORENET
+#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER
/* boot from PCIE --master */
char *s = getenv("bootmaster");
char pcie[6];
@@ -499,13 +503,7 @@ void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info)
}
#ifndef CONFIG_PCI_NOSCAN
- pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &temp8);
-
- /* Programming Interface (PCI_CLASS_PROG)
- * 0 == pci host or pcie root-complex,
- * 1 == pci agent or pcie end-point
- */
- if (!temp8) {
+ if (!fsl_is_pci_agent(hose)) {
debug(" Scanning PCI bus %02x\n",
hose->current_busno);
hose->last_busno = pci_hose_scan_bus(hose, hose->current_busno);
@@ -543,12 +541,22 @@ void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info)
int fsl_is_pci_agent(struct pci_controller *hose)
{
- u8 prog_if;
+ u8 pcie_cap;
pci_dev_t dev = PCI_BDF(hose->first_busno, 0, 0);
- pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &prog_if);
+ pci_hose_read_config_byte(hose, dev, FSL_PCIE_CAP_ID, &pcie_cap);
+ if (pcie_cap == PCI_CAP_ID_EXP) {
+ u8 header_type;
- return (prog_if == FSL_PROG_IF_AGENT);
+ pci_hose_read_config_byte(hose, dev, PCI_HEADER_TYPE,
+ &header_type);
+ return (header_type & 0x7f) == PCI_HEADER_TYPE_NORMAL;
+ } else {
+ u8 prog_if;
+
+ pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &prog_if);
+ return (prog_if == FSL_PROG_IF_AGENT);
+ }
}
int fsl_pci_init_port(struct fsl_pci_info *pci_info,
@@ -594,7 +602,7 @@ int fsl_pci_init_port(struct fsl_pci_info *pci_info,
if (fsl_is_pci_agent(hose)) {
fsl_pci_config_unlock(hose);
hose->last_busno = hose->first_busno;
-#ifdef CONFIG_FSL_CORENET
+#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER
} else {
/* boot from PCIE --master releases slave's core 0 */
char *s = getenv("bootmaster");
@@ -618,12 +626,10 @@ int fsl_pci_init_port(struct fsl_pci_info *pci_info,
void fsl_pci_config_unlock(struct pci_controller *hose)
{
pci_dev_t dev = PCI_BDF(hose->first_busno,0,0);
- u8 agent;
u8 pcie_cap;
u16 pbfr;
- pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &agent);
- if (!agent)
+ if (!fsl_is_pci_agent(hose))
return;
pci_hose_read_config_byte(hose, dev, FSL_PCIE_CAP_ID, &pcie_cap);
@@ -660,10 +666,17 @@ int fsl_configure_pcie(struct fsl_pci_info *info,
}
#if defined(CONFIG_FSL_CORENET)
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+ #define _DEVDISR_PCIE1 FSL_CORENET_DEVDISR3_PCIE1
+ #define _DEVDISR_PCIE2 FSL_CORENET_DEVDISR3_PCIE2
+ #define _DEVDISR_PCIE3 FSL_CORENET_DEVDISR3_PCIE3
+ #define _DEVDISR_PCIE4 FSL_CORENET_DEVDISR3_PCIE4
+#else
#define _DEVDISR_PCIE1 FSL_CORENET_DEVDISR_PCIE1
#define _DEVDISR_PCIE2 FSL_CORENET_DEVDISR_PCIE2
#define _DEVDISR_PCIE3 FSL_CORENET_DEVDISR_PCIE3
#define _DEVDISR_PCIE4 FSL_CORENET_DEVDISR_PCIE4
+#endif
#define CONFIG_SYS_MPC8xxx_GUTS_ADDR CONFIG_SYS_MPC85xx_GUTS_ADDR
#elif defined(CONFIG_MPC85xx)
#define _DEVDISR_PCIE1 MPC85xx_DEVDISR_PCIE
@@ -743,34 +756,42 @@ int fsl_pcie_init_board(int busno)
{
struct fsl_pci_info pci_info;
ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC8xxx_GUTS_ADDR;
- u32 devdisr = in_be32(&gur->devdisr);
+ u32 devdisr;
+ u32 *addr;
+
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+ addr = &gur->devdisr3;
+#else
+ addr = &gur->devdisr;
+#endif
+ devdisr = in_be32(addr);
#ifdef CONFIG_PCIE1
SET_STD_PCIE_INFO(pci_info, 1);
busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE1, &pci_info);
#else
- setbits_be32(&gur->devdisr, _DEVDISR_PCIE1); /* disable */
+ setbits_be32(addr, _DEVDISR_PCIE1); /* disable */
#endif
#ifdef CONFIG_PCIE2
SET_STD_PCIE_INFO(pci_info, 2);
busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE2, &pci_info);
#else
- setbits_be32(&gur->devdisr, _DEVDISR_PCIE2); /* disable */
+ setbits_be32(addr, _DEVDISR_PCIE2); /* disable */
#endif
#ifdef CONFIG_PCIE3
SET_STD_PCIE_INFO(pci_info, 3);
busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE3, &pci_info);
#else
- setbits_be32(&gur->devdisr, _DEVDISR_PCIE3); /* disable */
+ setbits_be32(addr, _DEVDISR_PCIE3); /* disable */
#endif
#ifdef CONFIG_PCIE4
SET_STD_PCIE_INFO(pci_info, 4);
busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE4, &pci_info);
#else
- setbits_be32(&gur->devdisr, _DEVDISR_PCIE4); /* disable */
+ setbits_be32(addr, _DEVDISR_PCIE4); /* disable */
#endif
return busno;
diff --git a/drivers/spi/fsl_espi.c b/drivers/spi/fsl_espi.c
index a1ebd33..eb99e90 100644
--- a/drivers/spi/fsl_espi.c
+++ b/drivers/spi/fsl_espi.c
@@ -216,10 +216,8 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *data_out,
return 1;
}
memcpy(buffer, cmd_buf, cmd_len);
- if (cmd_len != 1) {
- if (data_in == NULL)
- memcpy(buffer + cmd_len, data_out, data_len);
- }
+ if (data_in == NULL)
+ memcpy(buffer + cmd_len, data_out, data_len);
break;
case SPI_XFER_BEGIN | SPI_XFER_END:
len = data_len;
diff --git a/include/config_phylib_all_drivers.h b/include/config_phylib_all_drivers.h
index 1db7cec..12828c6 100644
--- a/include/config_phylib_all_drivers.h
+++ b/include/config_phylib_all_drivers.h
@@ -23,6 +23,7 @@
#define CONFIG_PHY_NATSEMI
#define CONFIG_PHY_LXT
#define CONFIG_PHY_ATHEROS
+#define CONFIG_PHY_SMSC
#ifdef CONFIG_PHYLIB_10G
#define CONFIG_PHY_TERANETICS
diff --git a/include/configs/P3041DS.h b/include/configs/P3041DS.h
index 98e7a42..cf184e7 100644
--- a/include/configs/P3041DS.h
+++ b/include/configs/P3041DS.h
@@ -36,6 +36,10 @@
#define CONFIG_PCIE4
#define CONFIG_SYS_DPAA_RMAN
+#define CONFIG_SYS_SRIO
+#define CONFIG_SRIO1 /* SRIO port 1 */
+#define CONFIG_SRIO2 /* SRIO port 2 */
+
#define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */
#include "corenet_ds.h"
diff --git a/include/configs/P4080DS.h b/include/configs/P4080DS.h
index d6f2f5c..53979dd 100644
--- a/include/configs/P4080DS.h
+++ b/include/configs/P4080DS.h
@@ -33,6 +33,10 @@
#define CONFIG_MMC
#define CONFIG_PCIE3
+#define CONFIG_SYS_SRIO
+#define CONFIG_SRIO1 /* SRIO port 1 */
+#define CONFIG_SRIO2 /* SRIO port 2 */
+
#define CONFIG_ICS307_REFCLK_HZ 33333000 /* ICS307 ref clk freq */
#include "corenet_ds.h"
diff --git a/include/configs/P5020DS.h b/include/configs/P5020DS.h
index 8625f76..7018d7a 100644
--- a/include/configs/P5020DS.h
+++ b/include/configs/P5020DS.h
@@ -37,6 +37,10 @@
#define CONFIG_SYS_FSL_RAID_ENGINE
#define CONFIG_SYS_DPAA_RMAN
+#define CONFIG_SYS_SRIO
+#define CONFIG_SRIO1 /* SRIO port 1 */
+#define CONFIG_SRIO2 /* SRIO port 2 */
+
#define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */
#include "corenet_ds.h"
diff --git a/include/configs/T4240QDS.h b/include/configs/T4240QDS.h
new file mode 100644
index 0000000..76b3ca6
--- /dev/null
+++ b/include/configs/T4240QDS.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright 2011-2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * T4240 QDS board configuration file
+ */
+#define CONFIG_T4240QDS
+#define CONFIG_PHYS_64BIT
+#define CONFIG_PPC_T4240
+
+#define CONFIG_FSL_SATA_V2
+#define CONFIG_PCIE4
+
+#define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */
+
+#include "t4qds.h"
diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h
index 8489d16..c41b039 100644
--- a/include/configs/corenet_ds.h
+++ b/include/configs/corenet_ds.h
@@ -76,10 +76,6 @@
#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
-#define CONFIG_SYS_SRIO
-#define CONFIG_SRIO1 /* SRIO port 1 */
-#define CONFIG_SRIO2 /* SRIO port 2 */
-
#define CONFIG_FSL_LAW /* Use common FSL init code */
#define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h
new file mode 100644
index 0000000..d58c24c
--- /dev/null
+++ b/include/configs/t4qds.h
@@ -0,0 +1,875 @@
+/*
+ * Copyright 2011-2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Corenet DS style board configuration file
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#ifdef CONFIG_RAMBOOT_PBL
+#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE
+#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
+#endif
+
+#define CONFIG_CMD_REGINFO
+
+/* High Level Configuration Options */
+#define CONFIG_BOOKE
+#define CONFIG_E6500
+#define CONFIG_E500 /* BOOKE e500 family */
+#define CONFIG_E500MC /* BOOKE e500mc family */
+#define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */
+#define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */
+#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */
+#define CONFIG_MP /* support multiple processors */
+
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE 0xeff80000
+#endif
+
+#ifndef CONFIG_RESET_VECTOR_ADDRESS
+#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc
+#endif
+
+#define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */
+#define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS
+#define CONFIG_FSL_IFC /* Enable IFC Support */
+#define CONFIG_PCI /* Enable PCI/PCIE */
+#define CONFIG_PCIE1 /* PCIE controler 1 */
+#define CONFIG_PCIE2 /* PCIE controler 2 */
+#define CONFIG_PCIE3 /* PCIE controler 3 */
+#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
+#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
+
+#define CONFIG_SYS_SRIO
+#define CONFIG_SRIO1 /* SRIO port 1 */
+#define CONFIG_SRIO2 /* SRIO port 2 */
+
+#define CONFIG_FSL_LAW /* Use common FSL init code */
+
+#define CONFIG_ENV_OVERWRITE
+
+#ifdef CONFIG_SYS_NO_FLASH
+#define CONFIG_ENV_IS_NOWHERE
+#else
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#endif
+
+#ifndef CONFIG_SYS_NO_FLASH
+#if defined(CONFIG_SPIFLASH)
+#define CONFIG_SYS_EXTRA_ENV_RELOC
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SPI_BUS 0
+#define CONFIG_ENV_SPI_CS 0
+#define CONFIG_ENV_SPI_MAX_HZ 10000000
+#define CONFIG_ENV_SPI_MODE 0
+#define CONFIG_ENV_SIZE 0x2000 /* 8KB */
+#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */
+#define CONFIG_ENV_SECT_SIZE 0x10000
+#elif defined(CONFIG_SDCARD)
+#define CONFIG_SYS_EXTRA_ENV_RELOC
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#define CONFIG_ENV_SIZE 0x2000
+#define CONFIG_ENV_OFFSET (512 * 1097)
+#elif defined(CONFIG_NAND)
+#define CONFIG_SYS_EXTRA_ENV_RELOC
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
+#define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
+#else
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE 0x2000
+#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
+#endif
+#else /* CONFIG_SYS_NO_FLASH */
+#define CONFIG_ENV_SIZE 0x2000
+#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
+#endif
+
+
+
+#define CONFIG_SYS_CLK_FREQ get_board_sys_clk()
+#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk()
+
+#ifndef __ASSEMBLY__
+unsigned long get_board_sys_clk(void);
+unsigned long get_board_ddr_clk(void);
+#endif
+
+/*
+ * These can be toggled for performance analysis, otherwise use default.
+ */
+#define CONFIG_SYS_CACHE_STASHING
+#define CONFIG_BTB /* toggle branch predition */
+#define CONFIG_DDR_ECC
+#ifdef CONFIG_DDR_ECC
+#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
+#define CONFIG_MEM_INIT_VALUE 0xdeadbeef
+#endif
+
+#define CONFIG_ENABLE_36BIT_PHYS
+
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_ADDR_MAP
+#define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */
+#endif
+
+#if 0
+#define CONFIG_POST CONFIG_SYS_POST_MEMORY /* test POST memory test */
+#endif
+#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0x00400000
+#define CONFIG_SYS_ALT_MEMTEST
+#define CONFIG_PANIC_HANG /* do not reset board on panic */
+
+/*
+ * Config the L3 Cache as L3 SRAM
+ */
+#define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE
+
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_DCSRBAR 0xf0000000
+#define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull
+#endif
+
+/* EEPROM */
+#define CONFIG_ID_EEPROM
+#define CONFIG_SYS_I2C_EEPROM_NXID
+#define CONFIG_SYS_EEPROM_BUS_NUM 0
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+
+/*
+ * DDR Setup
+ */
+#define CONFIG_VERY_BIG_RAM
+#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
+#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
+
+/* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
+#define CONFIG_DIMM_SLOTS_PER_CTLR 2
+#define CONFIG_CHIP_SELECTS_PER_CTRL 4
+#define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
+
+#define CONFIG_DDR_SPD
+#define CONFIG_FSL_DDR3
+
+#define CONFIG_SYS_SPD_BUS_NUM 0
+#define SPD_EEPROM_ADDRESS1 0x51
+#define SPD_EEPROM_ADDRESS2 0x52
+#define SPD_EEPROM_ADDRESS3 0x53
+#define SPD_EEPROM_ADDRESS4 0x54
+#define SPD_EEPROM_ADDRESS5 0x55
+#define SPD_EEPROM_ADDRESS6 0x56
+#define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 /* for p3041/p5010 */
+#define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */
+
+/*
+ * IFC Definitions
+ */
+#define CONFIG_SYS_FLASH_BASE 0xe0000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
+#else
+#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
+#endif
+
+#define CONFIG_SYS_NOR0_CSPR_EXT (0xf)
+#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
+ + 0x8000000) | \
+ CSPR_PORT_SIZE_16 | \
+ CSPR_MSEL_NOR | \
+ CSPR_V)
+#define CONFIG_SYS_NOR1_CSPR_EXT (0xf)
+#define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
+ CSPR_PORT_SIZE_16 | \
+ CSPR_MSEL_NOR | \
+ CSPR_V)
+#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024)
+/* NOR Flash Timing Params */
+#define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80
+
+#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x01) | \
+ FTIM0_NOR_TEADC(0x01) | \
+ FTIM0_NOR_TEAHC(0x20))
+#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \
+ FTIM1_NOR_TRAD_NOR(0x1A) |\
+ FTIM1_NOR_TSEQRAD_NOR(0x13))
+#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x01) | \
+ FTIM2_NOR_TCH(0x0E) | \
+ FTIM2_NOR_TWPH(0x0E) | \
+ FTIM2_NOR_TWP(0x1c))
+#define CONFIG_SYS_NOR_FTIM3 0x0
+
+#define CONFIG_SYS_FLASH_QUIET_TEST
+#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
+
+#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */
+#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
+
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \
+ + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
+
+#define CONFIG_FSL_QIXIS /* use common QIXIS code */
+#define QIXIS_BASE 0xffdf0000
+#define QIXIS_LBMAP_SWITCH 6
+#define QIXIS_LBMAP_MASK 0x0f
+#define QIXIS_LBMAP_SHIFT 0
+#define QIXIS_LBMAP_DFLTBANK 0x00
+#define QIXIS_LBMAP_ALTBANK 0x04
+#define QIXIS_RST_CTL_RESET 0x83
+#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20
+#define QIXIS_RCFG_CTL_RECONFIG_START 0x21
+#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08
+#ifdef CONFIG_PHYS_64BIT
+#define QIXIS_BASE_PHYS (0xf00000000ull | QIXIS_BASE)
+#else
+#define QIXIS_BASE_PHYS QIXIS_BASE
+#endif
+
+#define CONFIG_SYS_CSPR3_EXT (0xf)
+#define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
+ | CSPR_PORT_SIZE_8 \
+ | CSPR_MSEL_GPCM \
+ | CSPR_V)
+#define CONFIG_SYS_AMASK3 IFC_AMASK(64*1024)
+#define CONFIG_SYS_CSOR3 0x0
+/* QIXIS Timing parameters for IFC CS3 */
+#define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \
+ FTIM0_GPCM_TEADC(0x0e) | \
+ FTIM0_GPCM_TEAHC(0x0e))
+#define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0xff) | \
+ FTIM1_GPCM_TRAD(0x3f))
+#define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \
+ FTIM2_GPCM_TCH(0x0) | \
+ FTIM2_GPCM_TWP(0x1f))
+#define CONFIG_SYS_CS3_FTIM3 0x0
+
+/* NAND Flash on IFC */
+#define CONFIG_NAND_FSL_IFC
+#define CONFIG_SYS_NAND_BASE 0xff800000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE)
+#else
+#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE
+#endif
+
+#define CONFIG_SYS_NAND_CSPR_EXT (0xf)
+#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
+ | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
+ | CSPR_MSEL_NAND /* MSEL = NAND */ \
+ | CSPR_V)
+#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024)
+
+#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \
+ | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \
+ | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \
+ | CSOR_NAND_RAL_3 /* RAL = 2Byes */ \
+ | CSOR_NAND_PGS_2K /* Page Size = 2K */ \
+ | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
+ | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/
+
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+
+/* ONFI NAND Flash mode0 Timing Params */
+#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \
+ FTIM0_NAND_TWP(0x18) | \
+ FTIM0_NAND_TWCHT(0x07) | \
+ FTIM0_NAND_TWH(0x0a))
+#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \
+ FTIM1_NAND_TWBE(0x39) | \
+ FTIM1_NAND_TRR(0x0e) | \
+ FTIM1_NAND_TRP(0x18))
+#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \
+ FTIM2_NAND_TREH(0x0a) | \
+ FTIM2_NAND_TWHRE(0x1e))
+#define CONFIG_SYS_NAND_FTIM3 0x0
+
+#define CONFIG_SYS_NAND_DDR_LAW 11
+
+#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_MTD_NAND_VERIFY_WRITE
+#define CONFIG_CMD_NAND
+
+#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
+
+#if defined(CONFIG_NAND)
+#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT
+#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR
+#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK
+#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR
+#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0
+#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1
+#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2
+#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3
+#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR0_CSPR_EXT
+#define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR0_CSPR
+#define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK
+#define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR
+#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0
+#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1
+#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2
+#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3
+#else
+#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT
+#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR
+#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK
+#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR
+#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0
+#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1
+#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2
+#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3
+#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT
+#define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR
+#define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK
+#define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR
+#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0
+#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1
+#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2
+#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3
+#endif
+#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT
+#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR
+#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK
+#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR
+#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0
+#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1
+#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2
+#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3
+
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+
+#if defined(CONFIG_RAMBOOT_PBL)
+#define CONFIG_SYS_RAMBOOT
+#endif
+
+#define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_HWCONFIG
+
+/* define to use L1 as initial stack */
+#define CONFIG_L1_INIT_RAM
+#define CONFIG_SYS_INIT_RAM_LOCK
+#define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe0ec000
+/* The assembler doesn't like typecast */
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
+ ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
+ CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
+#else
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS 0xfe0ec000 /* Initial L1 address */
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
+#endif
+#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000
+
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
+
+#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
+#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
+
+/* Serial Port - controlled on board with jumper J8
+ * open - index 2
+ * shorted - index 1
+ */
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE 1
+#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2)
+
+#define CONFIG_SYS_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
+#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
+#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
+#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
+
+/* Use the HUSH parser */
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT
+#define CONFIG_OF_BOARD_SETUP
+#define CONFIG_OF_STDOUT_VIA_ALIAS
+
+/* new uImage format support */
+#define CONFIG_FIT
+#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */
+
+/* I2C */
+#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
+#define CONFIG_HARD_I2C /* I2C with hardware support */
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_I2C_CMD_TREE
+#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed */
+#define CONFIG_SYS_I2C_SLAVE 0x7F
+#define CONFIG_SYS_I2C_OFFSET 0x118000
+#define CONFIG_SYS_I2C2_OFFSET 0x118100
+#define I2C_MUX_PCA_ADDR_PRI 0x77 /* I2C bus multiplexer,primary */
+#define I2C_MUX_PCA_ADDR_SEC 0x76 /* I2C bus multiplexer,secondary */
+
+/* VSC Crossbar switches */
+#define CONFIG_VSC_CROSSBAR
+#define I2C_MUX_CH_DEFAULT 0x8
+#define I2C_MUX_CH_VSC3316_FS 0xc
+#define I2C_MUX_CH_VSC3316_BS 0xd
+#define VSC3316_FSM_TX_ADDR 0x70
+#define VSC3316_FSM_RX_ADDR 0x71
+
+/*
+ * RapidIO
+ */
+#define CONFIG_SYS_SRIO1_MEM_VIRT 0xa0000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_SRIO1_MEM_PHYS 0xc20000000ull
+#else
+#define CONFIG_SYS_SRIO1_MEM_PHYS 0xa0000000
+#endif
+#define CONFIG_SYS_SRIO1_MEM_SIZE 0x10000000 /* 256M */
+
+#define CONFIG_SYS_SRIO2_MEM_VIRT 0xb0000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_SRIO2_MEM_PHYS 0xc30000000ull
+#else
+#define CONFIG_SYS_SRIO2_MEM_PHYS 0xb0000000
+#endif
+#define CONFIG_SYS_SRIO2_MEM_SIZE 0x10000000 /* 256M */
+
+/*
+ * for slave u-boot IMAGE instored in master memory space,
+ * PHYS must be aligned based on the SIZE
+ */
+#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull
+#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull
+#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x80000 /* 512K */
+#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff80000ull
+/*
+ * for slave UCODE and ENV instored in master memory space,
+ * PHYS must be aligned based on the SIZE
+ */
+#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef040000ull
+#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
+#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */
+
+/* slave core release by master*/
+#define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
+#define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
+
+/*
+ * SRIO_PCIE_BOOT - SLAVE
+ */
+#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
+#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
+#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
+ (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
+#endif
+/*
+ * eSPI - Enhanced SPI
+ */
+#define CONFIG_FSL_ESPI
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_SPANSION
+#define CONFIG_CMD_SF
+#define CONFIG_SF_DEFAULT_SPEED 10000000
+#define CONFIG_SF_DEFAULT_MODE 0
+
+/*
+ * General PCI
+ * Memory space is mapped 1-1, but I/O space must start from 0.
+ */
+
+/* controller 1, direct to uli, tgtid 3, Base address 20000 */
+#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull
+#else
+#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000
+#endif
+#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */
+#define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000
+#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull
+#else
+#define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000
+#endif
+#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */
+
+/* controller 2, Slot 2, tgtid 2, Base address 201000 */
+#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000
+#define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull
+#else
+#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000
+#define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000
+#endif
+#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */
+#define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000
+#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull
+#else
+#define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000
+#endif
+#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */
+
+/* controller 3, Slot 1, tgtid 1, Base address 202000 */
+#define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000
+#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull
+#else
+#define CONFIG_SYS_PCIE3_MEM_BUS 0xc0000000
+#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc0000000
+#endif
+#define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */
+#define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000
+#define CONFIG_SYS_PCIE3_IO_BUS 0x00000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull
+#else
+#define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000
+#endif
+#define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */
+
+/* controller 4, Base address 203000 */
+#define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000
+#define CONFIG_SYS_PCIE4_MEM_PHYS 0xc60000000ull
+#define CONFIG_SYS_PCIE4_MEM_SIZE 0x20000000 /* 512M */
+#define CONFIG_SYS_PCIE4_IO_BUS 0x00000000
+#define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull
+#define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */
+
+/* Qman/Bman */
+#ifndef CONFIG_NOBQFMAN
+#define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */
+#define CONFIG_SYS_BMAN_NUM_PORTALS 50
+#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull
+#else
+#define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE
+#endif
+#define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000
+#define CONFIG_SYS_QMAN_NUM_PORTALS 50
+#define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull
+#else
+#define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE
+#endif
+#define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000
+
+#define CONFIG_SYS_DPAA_FMAN
+#define CONFIG_SYS_DPAA_PME
+#define CONFIG_SYS_PMAN
+#define CONFIG_SYS_DPAA_DCE
+#define CONFIG_SYS_INTERLAKEN
+
+/* Default address of microcode for the Linux Fman driver */
+#if defined(CONFIG_SPIFLASH)
+/*
+ * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
+ * env, so we got 0x110000.
+ */
+#define CONFIG_SYS_QE_FW_IN_SPIFLASH
+#define CONFIG_SYS_QE_FMAN_FW_ADDR 0x110000
+#elif defined(CONFIG_SDCARD)
+/*
+ * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
+ * about 545KB (1089 blocks), Env is stored after the image, and the env size is
+ * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130.
+ */
+#define CONFIG_SYS_QE_FMAN_FW_IN_MMC
+#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1130)
+#elif defined(CONFIG_NAND)
+#define CONFIG_SYS_QE_FMAN_FW_IN_NAND
+#define CONFIG_SYS_QE_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE)
+#else
+#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
+#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000
+#endif
+#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000
+#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
+#endif /* CONFIG_NOBQFMAN */
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+#define CONFIG_FMAN_ENET
+#define CONFIG_PHYLIB_10G
+#define CONFIG_PHY_VITESSE
+#define CONFIG_PHY_TERANETICS
+#define SGMII_CARD_PORT1_PHY_ADDR 0x1C
+#define SGMII_CARD_PORT2_PHY_ADDR 0x1D
+#define SGMII_CARD_PORT3_PHY_ADDR 0x1E
+#define SGMII_CARD_PORT4_PHY_ADDR 0x1F
+#define XFI_CARD_PORT1_PHY_ADDR 0x1 /* tmp, FIXME below addr */
+#define XFI_CARD_PORT2_PHY_ADDR 0x2
+#define XFI_CARD_PORT3_PHY_ADDR 0x3
+#define XFI_CARD_PORT4_PHY_ADDR 0x4
+#define QSGMII_CARD_PHY_ADDR 0x5
+#define FM1_10GEC1_PHY_ADDR 0x6
+#define FM1_10GEC2_PHY_ADDR 0x7
+#define FM2_10GEC1_PHY_ADDR 0x8
+#define FM2_10GEC2_PHY_ADDR 0x9
+#endif
+
+#ifdef CONFIG_PCI
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+#define CONFIG_E1000
+
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CONFIG_DOS_PARTITION
+#endif /* CONFIG_PCI */
+
+/* SATA */
+#ifdef CONFIG_FSL_SATA_V2
+#define CONFIG_LIBATA
+#define CONFIG_FSL_SATA
+
+#define CONFIG_SYS_SATA_MAX_DEVICE 2
+#define CONFIG_SATA1
+#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR
+#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA
+#define CONFIG_SATA2
+#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR
+#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA
+
+#define CONFIG_LBA48
+#define CONFIG_CMD_SATA
+#define CONFIG_DOS_PARTITION
+#define CONFIG_CMD_EXT2
+#endif
+
+#ifdef CONFIG_FMAN_ENET
+#define CONFIG_MII /* MII PHY management */
+#define CONFIG_ETHPRIME "FM1@DTSEC1"
+#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */
+#endif
+
+/*
+ * Environment
+ */
+#define CONFIG_LOADS_ECHO /* echo on for serial download */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_ERRATA
+#define CONFIG_CMD_GREPENV
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SETEXPR
+
+#ifdef CONFIG_PCI
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_NET
+#endif
+
+/*
+* USB
+*/
+#define CONFIG_CMD_USB
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_FSL
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_CMD_EXT2
+#define CONFIG_HAS_FSL_DR_USB
+
+#define CONFIG_MMC
+
+#ifdef CONFIG_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
+#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
+#define CONFIG_CMD_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_CMDLINE_EDITING /* Command-line editing */
+#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
+#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
+#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
+#ifdef CONFIG_CMD_KGDB
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
+#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks*/
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 64 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/
+#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
+
+#ifdef CONFIG_CMD_KGDB
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+#define CONFIG_ROOTPATH "/opt/nfsroot"
+#define CONFIG_BOOTFILE "uImage"
+#define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/
+
+/* default location for tftp and bootm */
+#define CONFIG_LOADADDR 1000000
+
+#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
+
+#define CONFIG_BAUDRATE 115200
+
+#define __USB_PHY_TYPE utmi
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "hwconfig=fsl_ddr:ctlr_intlv=3way_4KB," \
+ "bank_intlv=auto;" \
+ "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
+ "netdev=eth0\0" \
+ "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
+ "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \
+ "tftpflash=tftpboot $loadaddr $uboot && " \
+ "protect off $ubootaddr +$filesize && " \
+ "erase $ubootaddr +$filesize && " \
+ "cp.b $loadaddr $ubootaddr $filesize && " \
+ "protect on $ubootaddr +$filesize && " \
+ "cmp.b $loadaddr $ubootaddr $filesize\0" \
+ "consoledev=ttyS0\0" \
+ "ramdiskaddr=2000000\0" \
+ "ramdiskfile=t4240qds/ramdisk.uboot\0" \
+ "fdtaddr=c00000\0" \
+ "fdtfile=t4240qds/t4240qds.dtb\0" \
+ "bdev=sda3\0" \
+ "c=ffe\0"
+
+/* For emulation this causes u-boot to jump to the start of the proof point
+ app code automatically */
+#define CONFIG_PROOF_POINTS \
+ "setenv bootargs root=/dev/$bdev rw " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "cpu 1 release 0x29000000 - - -;" \
+ "cpu 2 release 0x29000000 - - -;" \
+ "cpu 3 release 0x29000000 - - -;" \
+ "cpu 4 release 0x29000000 - - -;" \
+ "cpu 5 release 0x29000000 - - -;" \
+ "cpu 6 release 0x29000000 - - -;" \
+ "cpu 7 release 0x29000000 - - -;" \
+ "go 0x29000000"
+
+#define CONFIG_HVBOOT \
+ "setenv bootargs config-addr=0x60000000; " \
+ "bootm 0x01000000 - 0x00f00000"
+
+#define CONFIG_ALU \
+ "setenv bootargs root=/dev/$bdev rw " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "cpu 1 release 0x01000000 - - -;" \
+ "cpu 2 release 0x01000000 - - -;" \
+ "cpu 3 release 0x01000000 - - -;" \
+ "cpu 4 release 0x01000000 - - -;" \
+ "cpu 5 release 0x01000000 - - -;" \
+ "cpu 6 release 0x01000000 - - -;" \
+ "cpu 7 release 0x01000000 - - -;" \
+ "go 0x01000000"
+
+#define CONFIG_LINUX \
+ "setenv bootargs root=/dev/ram rw " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "setenv ramdiskaddr 0x02000000;" \
+ "setenv fdtaddr 0x00c00000;" \
+ "setenv loadaddr 0x1000000;" \
+ "bootm $loadaddr $ramdiskaddr $fdtaddr"
+
+#define CONFIG_HDBOOT \
+ "setenv bootargs root=/dev/$bdev rw " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr - $fdtaddr"
+
+#define CONFIG_NFSBOOTCOMMAND \
+ "setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$serverip:$rootpath " \
+ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr - $fdtaddr"
+
+#define CONFIG_RAMBOOTCOMMAND \
+ "setenv bootargs root=/dev/ram rw " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $ramdiskaddr $ramdiskfile;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr $ramdiskaddr $fdtaddr"
+
+#define CONFIG_BOOTCOMMAND CONFIG_LINUX
+
+#ifdef CONFIG_SECURE_BOOT
+#include <asm/fsl_secure_boot.h>
+#endif
+
+#endif /* __CONFIG_H */
diff --git a/include/e500.h b/include/e500.h
index e1708b9..0ff8e89 100644
--- a/include/e500.h
+++ b/include/e500.h
@@ -18,6 +18,9 @@ typedef struct
#ifdef CONFIG_SYS_DPAA_FMAN
unsigned long freqFMan[CONFIG_SYS_NUM_FMAN];
#endif
+#ifdef CONFIG_SYS_DPAA_QBMAN
+ unsigned long freqQMAN;
+#endif
#ifdef CONFIG_SYS_DPAA_PME
unsigned long freqPME;
#endif
diff --git a/include/fm_eth.h b/include/fm_eth.h
index e56541d..495765b 100644
--- a/include/fm_eth.h
+++ b/include/fm_eth.h
@@ -1,5 +1,5 @@
/*
- * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ * Copyright 2009-2012 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -30,13 +30,21 @@ enum fm_port {
FM1_DTSEC3,
FM1_DTSEC4,
FM1_DTSEC5,
+ FM1_DTSEC6,
+ FM1_DTSEC9,
+ FM1_DTSEC10,
FM1_10GEC1,
+ FM1_10GEC2,
FM2_DTSEC1,
FM2_DTSEC2,
FM2_DTSEC3,
FM2_DTSEC4,
FM2_DTSEC5,
+ FM2_DTSEC6,
+ FM2_DTSEC9,
+ FM2_DTSEC10,
FM2_10GEC1,
+ FM2_10GEC2,
NUM_FM_PORTS,
};
@@ -45,8 +53,15 @@ enum fm_eth_type {
FM_ETH_10G_E,
};
+#ifdef CONFIG_SYS_FMAN_V3
+#define CONFIG_SYS_FM1_DTSEC_MDIO_ADDR (CONFIG_SYS_FSL_FM1_ADDR + 0xfc000)
+#define CONFIG_SYS_FM1_TGEC_MDIO_ADDR (CONFIG_SYS_FSL_FM1_ADDR + 0xfd000)
+#define CONFIG_SYS_FM2_DTSEC_MDIO_ADDR (CONFIG_SYS_FSL_FM2_ADDR + 0xfc000)
+#define CONFIG_SYS_FM2_TGEC_MDIO_ADDR (CONFIG_SYS_FSL_FM2_ADDR + 0xfd000)
+#else
#define CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR (CONFIG_SYS_FSL_FM1_ADDR + 0xe1120)
#define CONFIG_SYS_FM1_TGEC_MDIO_ADDR (CONFIG_SYS_FSL_FM1_ADDR + 0xf1000)
+#endif
#define DEFAULT_FM_MDIO_NAME "FSL_MDIO0"
#define DEFAULT_FM_TGEC_MDIO_NAME "FM_TGEC_MDIO"
@@ -57,6 +72,33 @@ enum fm_eth_type {
.phy_regs = (void *)pregs, \
.enet_if = PHY_INTERFACE_MODE_NONE, \
+#ifdef CONFIG_SYS_FMAN_V3
+#define FM_DTSEC_INFO_INITIALIZER(idx, n) \
+{ \
+ FM_ETH_INFO_INITIALIZER(idx, CONFIG_SYS_FM1_DTSEC_MDIO_ADDR) \
+ .index = idx, \
+ .num = n - 1, \
+ .type = FM_ETH_1G_E, \
+ .port = FM##idx##_DTSEC##n, \
+ .rx_port_id = RX_PORT_1G_BASE + n - 1, \
+ .tx_port_id = TX_PORT_1G_BASE + n - 1, \
+ .compat_offset = CONFIG_SYS_FSL_FM##idx##_OFFSET + \
+ offsetof(struct ccsr_fman, memac[n-1]),\
+}
+
+#define FM_TGEC_INFO_INITIALIZER(idx, n) \
+{ \
+ FM_ETH_INFO_INITIALIZER(idx, CONFIG_SYS_FM1_TGEC_MDIO_ADDR) \
+ .index = idx, \
+ .num = n - 1, \
+ .type = FM_ETH_10G_E, \
+ .port = FM##idx##_10GEC##n, \
+ .rx_port_id = RX_PORT_10G_BASE + n - 1, \
+ .tx_port_id = TX_PORT_10G_BASE + n - 1, \
+ .compat_offset = CONFIG_SYS_FSL_FM##idx##_OFFSET + \
+ offsetof(struct ccsr_fman, memac[n-1]),\
+}
+#else
#define FM_DTSEC_INFO_INITIALIZER(idx, n) \
{ \
FM_ETH_INFO_INITIALIZER(idx, CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR) \
@@ -82,7 +124,7 @@ enum fm_eth_type {
.compat_offset = CONFIG_SYS_FSL_FM##idx##_OFFSET + \
offsetof(struct ccsr_fman, mac_10g[n-1]),\
}
-
+#endif
struct fm_eth_info {
u8 enabled;
u8 fm;
@@ -104,7 +146,14 @@ struct tgec_mdio_info {
char *name;
};
+struct memac_mdio_info {
+ struct memac_mdio_controller *regs;
+ char *name;
+};
+
int fm_tgec_mdio_init(bd_t *bis, struct tgec_mdio_info *info);
+int fm_memac_mdio_init(bd_t *bis, struct memac_mdio_info *info);
+
int fm_standard_init(bd_t *bis);
void fman_enet_init(void);
void fdt_fixup_fman_ethernet(void *fdt);
diff --git a/include/fsl_mdio.h b/include/fsl_mdio.h
index ea8b54b..e24e828 100644
--- a/include/fsl_mdio.h
+++ b/include/fsl_mdio.h
@@ -1,5 +1,5 @@
/*
- * Copyright 2009-2010 Freescale Semiconductor, Inc.
+ * Copyright 2009-2012 Freescale Semiconductor, Inc.
* Jun-jie Zhang <b18070@freescale.com>
* Mingkai Hu <Mingkai.hu@freescale.com>
*
@@ -51,6 +51,10 @@ int tsec_local_mdio_read(struct tsec_mii_mng *phyregs, int port_addr,
int tsec_phy_read(struct mii_dev *bus, int addr, int dev_addr, int regnum);
int tsec_phy_write(struct mii_dev *bus, int addr, int dev_addr, int regnum,
u16 value);
+int memac_mdio_write(struct mii_dev *bus, int port_addr, int dev_addr,
+ int regnum, u16 value);
+int memac_mdio_read(struct mii_dev *bus, int port_addr, int dev_addr,
+ int regnum);
struct fsl_pq_mdio_info {
struct tsec_mii_mng *regs;