diff options
| -rw-r--r-- | arch/arm/cpu/armv7/am33xx/Makefile | 3 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/am33xx/clock_am33xx.c (renamed from arch/arm/cpu/armv7/am33xx/clock.c) | 33 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/am33xx/clock_ti814x.c | 406 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-am33xx/clock.h | 2 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-am33xx/clocks_am33xx.h | 31 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-am33xx/hardware_am33xx.h | 30 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-am33xx/hardware_ti814x.h | 30 |
7 files changed, 502 insertions, 33 deletions
diff --git a/arch/arm/cpu/armv7/am33xx/Makefile b/arch/arm/cpu/armv7/am33xx/Makefile index 70c443e..c97e30d 100644 --- a/arch/arm/cpu/armv7/am33xx/Makefile +++ b/arch/arm/cpu/armv7/am33xx/Makefile @@ -16,7 +16,8 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).o -COBJS += clock.o +COBJS-$(CONFIG_AM33XX) += clock_am33xx.o +COBJS-$(CONFIG_TI814X) += clock_ti814x.o COBJS += sys_info.o COBJS += mem.o COBJS += ddr.o diff --git a/arch/arm/cpu/armv7/am33xx/clock.c b/arch/arm/cpu/armv7/am33xx/clock_am33xx.c index d7d98d1..afc0d92 100644 --- a/arch/arm/cpu/armv7/am33xx/clock.c +++ b/arch/arm/cpu/armv7/am33xx/clock_am33xx.c @@ -1,9 +1,9 @@ /* - * clock.c + * clock_am33xx.c * * clocks for AM33XX based boards * - * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + * Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/ * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -42,6 +42,35 @@ #define CPGMAC0_IDLE 0x30000 #define DPLL_CLKDCOLDO_GATE_CTRL 0x300 +#define OSC (V_OSCK/1000000) + +#define MPUPLL_M CONFIG_SYS_MPUCLK +#define MPUPLL_N (OSC-1) +#define MPUPLL_M2 1 + +/* Core PLL Fdll = 1 GHZ, */ +#define COREPLL_M 1000 +#define COREPLL_N (OSC-1) + +#define COREPLL_M4 10 /* CORE_CLKOUTM4 = 200 MHZ */ +#define COREPLL_M5 8 /* CORE_CLKOUTM5 = 250 MHZ */ +#define COREPLL_M6 4 /* CORE_CLKOUTM6 = 500 MHZ */ + +/* + * USB PHY clock is 960 MHZ. Since, this comes directly from Fdll, Fdll + * frequency needs to be set to 960 MHZ. Hence, + * For clkout = 192 MHZ, Fdll = 960 MHZ, divider values are given below + */ +#define PERPLL_M 960 +#define PERPLL_N (OSC-1) +#define PERPLL_M2 5 + +/* DDR Freq is 266 MHZ for now */ +/* Set Fdll = 400 MHZ , Fdll = M * 2 * CLKINP/ N + 1; clkout = Fdll /(2 * M2) */ +#define DDRPLL_M 266 +#define DDRPLL_N (OSC-1) +#define DDRPLL_M2 1 + const struct cm_perpll *cmper = (struct cm_perpll *)CM_PER; const struct cm_wkuppll *cmwkup = (struct cm_wkuppll *)CM_WKUP; const struct cm_dpll *cmdpll = (struct cm_dpll *)CM_DPLL; diff --git a/arch/arm/cpu/armv7/am33xx/clock_ti814x.c b/arch/arm/cpu/armv7/am33xx/clock_ti814x.c new file mode 100644 index 0000000..cb4210f --- /dev/null +++ b/arch/arm/cpu/armv7/am33xx/clock_ti814x.c @@ -0,0 +1,406 @@ +/* + * clock_ti814x.c + * + * Clocks for TI814X based boards + * + * Copyright (C) 2013, Texas Instruments, Incorporated + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <common.h> +#include <asm/arch/cpu.h> +#include <asm/arch/clock.h> +#include <asm/arch/hardware.h> +#include <asm/io.h> + +/* PRCM */ +#define PRCM_MOD_EN 0x2 + +/* CLK_SRC */ +#define OSC_SRC0 0 +#define OSC_SRC1 1 + +#define L3_OSC_SRC OSC_SRC0 + +#define OSC_0_FREQ 20 + +#define DCO_HS2_MIN 500 +#define DCO_HS2_MAX 1000 +#define DCO_HS1_MIN 1000 +#define DCO_HS1_MAX 2000 + +#define SELFREQDCO_HS2 0x00000801 +#define SELFREQDCO_HS1 0x00001001 + +#define MPU_N 0x1 +#define MPU_M 0x3C +#define MPU_M2 1 +#define MPU_CLKCTRL 0x1 + +#define L3_N 19 +#define L3_M 880 +#define L3_M2 4 +#define L3_CLKCTRL 0x801 + +#define DDR_N 19 +#define DDR_M 666 +#define DDR_M2 2 +#define DDR_CLKCTRL 0x801 + +/* ADPLLJ register values */ +#define ADPLLJ_CLKCTRL_HS2 0x00000801 /* HS2 mode, TINT2 = 1 */ +#define ADPLLJ_CLKCTRL_HS1 0x00001001 /* HS1 mode, TINT2 = 1 */ +#define ADPLLJ_CLKCTRL_CLKDCOLDOEN (1 << 29) +#define ADPLLJ_CLKCTRL_IDLE (1 << 23) +#define ADPLLJ_CLKCTRL_CLKOUTEN (1 << 20) +#define ADPLLJ_CLKCTRL_CLKOUTLDOEN (1 << 19) +#define ADPLLJ_CLKCTRL_CLKDCOLDOPWDNZ (1 << 17) +#define ADPLLJ_CLKCTRL_LPMODE (1 << 12) +#define ADPLLJ_CLKCTRL_DRIFTGUARDIAN (1 << 11) +#define ADPLLJ_CLKCTRL_REGM4XEN (1 << 10) +#define ADPLLJ_CLKCTRL_TINITZ (1 << 0) +#define ADPLLJ_CLKCTRL_CLKDCO (ADPLLJ_CLKCTRL_CLKDCOLDOEN | \ + ADPLLJ_CLKCTRL_CLKOUTEN | \ + ADPLLJ_CLKCTRL_CLKOUTLDOEN | \ + ADPLLJ_CLKCTRL_CLKDCOLDOPWDNZ) + +#define ADPLLJ_STATUS_PHASELOCK (1 << 10) +#define ADPLLJ_STATUS_FREQLOCK (1 << 9) +#define ADPLLJ_STATUS_PHSFRQLOCK (ADPLLJ_STATUS_PHASELOCK | \ + ADPLLJ_STATUS_FREQLOCK) +#define ADPLLJ_STATUS_BYPASSACK (1 << 8) +#define ADPLLJ_STATUS_BYPASS (1 << 0) +#define ADPLLJ_STATUS_BYPASSANDACK (ADPLLJ_STATUS_BYPASSACK | \ + ADPLLJ_STATUS_BYPASS) + +#define ADPLLJ_TENABLE_ENB (1 << 0) +#define ADPLLJ_TENABLEDIV_ENB (1 << 0) + +#define ADPLLJ_M2NDIV_M2SHIFT 16 + +#define MPU_PLL_BASE (PLL_SUBSYS_BASE + 0x048) +#define L3_PLL_BASE (PLL_SUBSYS_BASE + 0x110) +#define DDR_PLL_BASE (PLL_SUBSYS_BASE + 0x290) + +struct ad_pll { + unsigned int pwrctrl; + unsigned int clkctrl; + unsigned int tenable; + unsigned int tenablediv; + unsigned int m2ndiv; + unsigned int mn2div; + unsigned int fracdiv; + unsigned int bwctrl; + unsigned int fracctrl; + unsigned int status; + unsigned int m3div; + unsigned int rampctrl; +}; + +#define OSC_SRC_CTRL (PLL_SUBSYS_BASE + 0x2C0) + +/* PRCM */ +#define CM_DEFAULT_BASE (PRCM_BASE + 0x0500) + +struct cm_def { + unsigned int resv0[2]; + unsigned int l3fastclkstctrl; + unsigned int resv1[1]; + unsigned int pciclkstctrl; + unsigned int resv2[1]; + unsigned int ducaticlkstctrl; + unsigned int resv3[1]; + unsigned int emif0clkctrl; + unsigned int emif1clkctrl; + unsigned int dmmclkctrl; + unsigned int fwclkctrl; + unsigned int resv4[10]; + unsigned int usbclkctrl; + unsigned int resv5[1]; + unsigned int sataclkctrl; + unsigned int resv6[4]; + unsigned int ducaticlkctrl; + unsigned int pciclkctrl; +}; + +#define CM_ALWON_BASE (PRCM_BASE + 0x1400) + +struct cm_alwon { + unsigned int l3slowclkstctrl; + unsigned int ethclkstctrl; + unsigned int l3medclkstctrl; + unsigned int mmu_clkstctrl; + unsigned int mmucfg_clkstctrl; + unsigned int ocmc0clkstctrl; + unsigned int vcpclkstctrl; + unsigned int mpuclkstctrl; + unsigned int sysclk4clkstctrl; + unsigned int sysclk5clkstctrl; + unsigned int sysclk6clkstctrl; + unsigned int rtcclkstctrl; + unsigned int l3fastclkstctrl; + unsigned int resv0[67]; + unsigned int mcasp0clkctrl; + unsigned int mcasp1clkctrl; + unsigned int mcasp2clkctrl; + unsigned int mcbspclkctrl; + unsigned int uart0clkctrl; + unsigned int uart1clkctrl; + unsigned int uart2clkctrl; + unsigned int gpio0clkctrl; + unsigned int gpio1clkctrl; + unsigned int i2c0clkctrl; + unsigned int i2c1clkctrl; + unsigned int mcasp345clkctrl; + unsigned int atlclkctrl; + unsigned int mlbclkctrl; + unsigned int pataclkctrl; + unsigned int resv1[1]; + unsigned int uart3clkctrl; + unsigned int uart4clkctrl; + unsigned int uart5clkctrl; + unsigned int wdtimerclkctrl; + unsigned int spiclkctrl; + unsigned int mailboxclkctrl; + unsigned int spinboxclkctrl; + unsigned int mmudataclkctrl; + unsigned int resv2[2]; + unsigned int mmucfgclkctrl; + unsigned int resv3[2]; + unsigned int ocmc0clkctrl; + unsigned int vcpclkctrl; + unsigned int resv4[2]; + unsigned int controlclkctrl; + unsigned int resv5[2]; + unsigned int gpmcclkctrl; + unsigned int ethernet0clkctrl; + unsigned int resv6[1]; + unsigned int mpuclkctrl; + unsigned int debugssclkctrl; + unsigned int l3clkctrl; + unsigned int l4hsclkctrl; + unsigned int l4lsclkctrl; + unsigned int rtcclkctrl; + unsigned int tpccclkctrl; + unsigned int tptc0clkctrl; + unsigned int tptc1clkctrl; + unsigned int tptc2clkctrl; + unsigned int tptc3clkctrl; + unsigned int resv7[4]; + unsigned int dcan01clkctrl; + unsigned int mmchs0clkctrl; + unsigned int mmchs1clkctrl; + unsigned int mmchs2clkctrl; + unsigned int custefuseclkctrl; +}; + + +const struct cm_alwon *cmalwon = (struct cm_alwon *)CM_ALWON_BASE; +const struct cm_def *cmdef = (struct cm_def *)CM_DEFAULT_BASE; + +/* + * Enable the peripheral clock for required peripherals + */ +static void enable_per_clocks(void) +{ + /* UART0 */ + writel(PRCM_MOD_EN, &cmalwon->uart0clkctrl); + while (readl(&cmalwon->uart0clkctrl) != PRCM_MOD_EN) + ; + + /* HSMMC1 */ + writel(PRCM_MOD_EN, &cmalwon->mmchs1clkctrl); + while (readl(&cmalwon->mmchs1clkctrl) != PRCM_MOD_EN) + ; +} + +/* + * select the HS1 or HS2 for DCO Freq + * return : CLKCTRL + */ +static u32 pll_dco_freq_sel(u32 clkout_dco) +{ + if (clkout_dco >= DCO_HS2_MIN && clkout_dco < DCO_HS2_MAX) + return SELFREQDCO_HS2; + else if (clkout_dco >= DCO_HS1_MIN && clkout_dco < DCO_HS1_MAX) + return SELFREQDCO_HS1; + else + return -1; +} + +/* + * select the sigma delta config + * return: sigma delta val + */ +static u32 pll_sigma_delta_val(u32 clkout_dco) +{ + u32 sig_val = 0; + float frac_div; + + frac_div = (float) clkout_dco / 250; + frac_div = frac_div + 0.90; + sig_val = (int)frac_div; + sig_val = sig_val << 24; + + return sig_val; +} + +/* + * configure individual ADPLLJ + */ +static void pll_config(u32 base, u32 n, u32 m, u32 m2, + u32 clkctrl_val, int adpllj) +{ + const struct ad_pll *adpll = (struct ad_pll *)base; + u32 m2nval, mn2val, read_clkctrl = 0, clkout_dco = 0; + u32 sig_val = 0, hs_mod = 0; + + m2nval = (m2 << ADPLLJ_M2NDIV_M2SHIFT) | n; + mn2val = m; + + /* calculate clkout_dco */ + clkout_dco = ((OSC_0_FREQ / (n+1)) * m); + + /* sigma delta & Hs mode selection skip for ADPLLS*/ + if (adpllj) { + sig_val = pll_sigma_delta_val(clkout_dco); + hs_mod = pll_dco_freq_sel(clkout_dco); + } + + /* by-pass pll */ + read_clkctrl = readl(&adpll->clkctrl); + writel((read_clkctrl | ADPLLJ_CLKCTRL_IDLE), &adpll->clkctrl); + while ((readl(&adpll->status) & ADPLLJ_STATUS_BYPASSANDACK) + != ADPLLJ_STATUS_BYPASSANDACK) + ; + + /* clear TINITZ */ + read_clkctrl = readl(&adpll->clkctrl); + writel((read_clkctrl & ~ADPLLJ_CLKCTRL_TINITZ), &adpll->clkctrl); + + /* + * ref_clk = 20/(n + 1); + * clkout_dco = ref_clk * m; + * clk_out = clkout_dco/m2; + */ + read_clkctrl = readl(&adpll->clkctrl) & + ~(ADPLLJ_CLKCTRL_LPMODE | + ADPLLJ_CLKCTRL_DRIFTGUARDIAN | + ADPLLJ_CLKCTRL_REGM4XEN); + writel(m2nval, &adpll->m2ndiv); + writel(mn2val, &adpll->mn2div); + + /* Skip for modena(ADPLLS) */ + if (adpllj) { + writel(sig_val, &adpll->fracdiv); + writel((read_clkctrl | hs_mod), &adpll->clkctrl); + } + + /* Load M2, N2 dividers of ADPLL */ + writel(ADPLLJ_TENABLEDIV_ENB, &adpll->tenablediv); + writel(~ADPLLJ_TENABLEDIV_ENB, &adpll->tenablediv); + + /* Load M, N dividers of ADPLL */ + writel(ADPLLJ_TENABLE_ENB, &adpll->tenable); + writel(~ADPLLJ_TENABLE_ENB, &adpll->tenable); + + /* Configure CLKDCOLDOEN,CLKOUTLDOEN,CLKOUT Enable BITS */ + read_clkctrl = readl(&adpll->clkctrl) & ~ADPLLJ_CLKCTRL_CLKDCO; + if (adpllj) + writel((read_clkctrl | ADPLLJ_CLKCTRL_CLKDCO), + &adpll->clkctrl); + + /* Enable TINTZ and disable IDLE(PLL in Active & Locked Mode */ + read_clkctrl = readl(&adpll->clkctrl) & ~ADPLLJ_CLKCTRL_IDLE; + writel((read_clkctrl | ADPLLJ_CLKCTRL_TINITZ), &adpll->clkctrl); + + /* Wait for phase and freq lock */ + while ((readl(&adpll->status) & ADPLLJ_STATUS_PHSFRQLOCK) != + ADPLLJ_STATUS_PHSFRQLOCK) + ; +} + +static void unlock_pll_control_mmr(void) +{ + /* TRM 2.10.1.4 and 3.2.7-3.2.11 */ + writel(0x1EDA4C3D, 0x481C5040); + writel(0x2FF1AC2B, 0x48140060); + writel(0xF757FDC0, 0x48140064); + writel(0xE2BC3A6D, 0x48140068); + writel(0x1EBF131D, 0x4814006c); + writel(0x6F361E05, 0x48140070); +} + +static void mpu_pll_config(void) +{ + pll_config(MPU_PLL_BASE, MPU_N, MPU_M, MPU_M2, MPU_CLKCTRL, 0); +} + +static void l3_pll_config(void) +{ + u32 l3_osc_src, rd_osc_src = 0; + + l3_osc_src = L3_OSC_SRC; + rd_osc_src = readl(OSC_SRC_CTRL); + + if (OSC_SRC0 == l3_osc_src) + writel((rd_osc_src & 0xfffffffe)|0x0, OSC_SRC_CTRL); + else + writel((rd_osc_src & 0xfffffffe)|0x1, OSC_SRC_CTRL); + + pll_config(L3_PLL_BASE, L3_N, L3_M, L3_M2, L3_CLKCTRL, 1); +} + +void ddr_pll_config(unsigned int ddrpll_m) +{ + pll_config(DDR_PLL_BASE, DDR_N, DDR_M, DDR_M2, DDR_CLKCTRL, 1); +} + +void enable_emif_clocks(void) {}; + +void enable_dmm_clocks(void) +{ + writel(PRCM_MOD_EN, &cmdef->fwclkctrl); + writel(PRCM_MOD_EN, &cmdef->l3fastclkstctrl); + writel(PRCM_MOD_EN, &cmdef->emif0clkctrl); + while ((readl(&cmdef->emif0clkctrl)) != PRCM_MOD_EN) + ; + writel(PRCM_MOD_EN, &cmdef->emif1clkctrl); + while ((readl(&cmdef->emif1clkctrl)) != PRCM_MOD_EN) + ; + while ((readl(&cmdef->l3fastclkstctrl) & 0x300) != 0x300) + ; + writel(PRCM_MOD_EN, &cmdef->dmmclkctrl); + while ((readl(&cmdef->dmmclkctrl)) != PRCM_MOD_EN) + ; + writel(PRCM_MOD_EN, &cmalwon->l3slowclkstctrl); + while ((readl(&cmalwon->l3slowclkstctrl) & 0x2100) != 0x2100) + ; +} + +/* + * Configure the PLL/PRCM for necessary peripherals + */ +void pll_init() +{ + unlock_pll_control_mmr(); + + /* Enable the control module */ + writel(PRCM_MOD_EN, &cmalwon->controlclkctrl); + + mpu_pll_config(); + + l3_pll_config(); + + /* Enable the required peripherals */ + enable_per_clocks(); +} diff --git a/arch/arm/include/asm/arch-am33xx/clock.h b/arch/arm/include/asm/arch-am33xx/clock.h index 872ff82..ecb5901 100644 --- a/arch/arm/include/asm/arch-am33xx/clock.h +++ b/arch/arm/include/asm/arch-am33xx/clock.h @@ -3,7 +3,7 @@ * * clock header * - * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + * Copyright (C) 2011, Texas Instruments Incorporated - http://www.ti.com/ * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as diff --git a/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h b/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h index 2d96007..89b63d9 100644 --- a/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h +++ b/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h @@ -3,7 +3,7 @@ * * AM33xx clock define * - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -19,40 +19,13 @@ #ifndef _CLOCKS_AM33XX_H_ #define _CLOCKS_AM33XX_H_ -#define OSC (V_OSCK/1000000) - /* MAIN PLL Fdll = 550 MHz, by default */ #ifndef CONFIG_SYS_MPUCLK #define CONFIG_SYS_MPUCLK 550 #endif -#define MPUPLL_M CONFIG_SYS_MPUCLK -#define MPUPLL_N (OSC-1) -#define MPUPLL_M2 1 - -/* Core PLL Fdll = 1 GHZ, */ -#define COREPLL_M 1000 -#define COREPLL_N (OSC-1) - -#define COREPLL_M4 10 /* CORE_CLKOUTM4 = 200 MHZ */ -#define COREPLL_M5 8 /* CORE_CLKOUTM5 = 250 MHZ */ -#define COREPLL_M6 4 /* CORE_CLKOUTM6 = 500 MHZ */ - -/* - * USB PHY clock is 960 MHZ. Since, this comes directly from Fdll, Fdll - * frequency needs to be set to 960 MHZ. Hence, - * For clkout = 192 MHZ, Fdll = 960 MHZ, divider values are given below - */ -#define PERPLL_M 960 -#define PERPLL_N (OSC-1) -#define PERPLL_M2 5 - -/* DDR Freq is 266 MHZ for now */ -/* Set Fdll = 400 MHZ , Fdll = M * 2 * CLKINP/ N + 1; clkout = Fdll /(2 * M2) */ -#define DDRPLL_M 266 -#define DDRPLL_N (OSC-1) -#define DDRPLL_M2 1 extern void pll_init(void); extern void enable_emif_clocks(void); +extern void enable_dmm_clocks(void); #endif /* endif _CLOCKS_AM33XX_H_ */ diff --git a/arch/arm/include/asm/arch-am33xx/hardware_am33xx.h b/arch/arm/include/asm/arch-am33xx/hardware_am33xx.h new file mode 100644 index 0000000..7a4070c --- /dev/null +++ b/arch/arm/include/asm/arch-am33xx/hardware_am33xx.h @@ -0,0 +1,30 @@ +/* + * hardware_am33xx.h + * + * AM33xx hardware specific header + * + * Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __AM33XX_HARDWARE_AM33XX_H +#define __AM33XX_HARDWARE_AM33XX_H + +/* VTP Base address */ +#define VTP0_CTRL_ADDR 0x44E10E0C + +/* DDR Base address */ +#define DDR_PHY_CMD_ADDR 0x44E12000 +#define DDR_PHY_DATA_ADDR 0x44E120C8 +#define DDR_DATA_REGS_NR 2 + +#endif /* __AM33XX_HARDWARE_AM33XX_H */ diff --git a/arch/arm/include/asm/arch-am33xx/hardware_ti814x.h b/arch/arm/include/asm/arch-am33xx/hardware_ti814x.h new file mode 100644 index 0000000..af7d1d8 --- /dev/null +++ b/arch/arm/include/asm/arch-am33xx/hardware_ti814x.h @@ -0,0 +1,30 @@ +/* + * hardware_ti814x.h + * + * TI814x hardware specific header + * + * Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __AM33XX_HARDWARE_TI814X_H +#define __AM33XX_HARDWARE_TI814X_H + +/* VTP Base address */ +#define VTP0_CTRL_ADDR 0x48140E0C + +/* DDR Base address */ +#define DDR_PHY_CMD_ADDR 0x47C0C400 +#define DDR_PHY_DATA_ADDR 0x47C0C4C8 +#define DDR_DATA_REGS_NR 4 + +#endif /* __AM33XX_HARDWARE_TI814X_H */ |