summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/powerpc/cpu/mpc8xxx/fdt.c23
-rw-r--r--arch/powerpc/include/asm/config.h9
-rw-r--r--arch/powerpc/include/asm/fsl_enet.h27
-rw-r--r--board/freescale/mpc8360emds/mpc8360emds.c10
-rw-r--r--board/freescale/mpc837xemds/mpc837xemds.c10
-rw-r--r--board/freescale/mpc8536ds/mpc8536ds.c6
-rw-r--r--board/freescale/mpc8544ds/mpc8544ds.c30
-rw-r--r--board/freescale/mpc8569mds/mpc8569mds.c4
-rw-r--r--board/freescale/mpc8572ds/mpc8572ds.c6
-rw-r--r--board/freescale/p1022ds/p1022ds.c6
-rw-r--r--board/freescale/p1_p2_rdb/p1_p2_rdb.c6
-rw-r--r--board/freescale/p2020ds/p2020ds.c7
-rw-r--r--common/Makefile4
-rw-r--r--common/cmd_mdio.c286
-rw-r--r--common/miiphyutil.c311
-rw-r--r--drivers/net/Makefile2
-rw-r--r--drivers/net/dm9000x.c18
-rw-r--r--drivers/net/enc28j60.c24
-rw-r--r--drivers/net/fsl_mdio.c120
-rw-r--r--drivers/net/phy/Makefile13
-rw-r--r--drivers/net/phy/atheros.c48
-rw-r--r--drivers/net/phy/broadcom.c288
-rw-r--r--drivers/net/phy/davicom.c98
-rw-r--r--drivers/net/phy/generic_10g.c105
-rw-r--r--drivers/net/phy/lxt.c87
-rw-r--r--drivers/net/phy/marvell.c367
-rw-r--r--drivers/net/phy/micrel.c40
-rw-r--r--drivers/net/phy/natsemi.c96
-rw-r--r--drivers/net/phy/phy.c755
-rw-r--r--drivers/net/phy/realtek.c130
-rw-r--r--drivers/net/phy/teranetics.c62
-rw-r--r--drivers/net/phy/vitesse.c242
-rw-r--r--drivers/net/tsec.c1992
-rw-r--r--drivers/net/uli526x.c24
-rw-r--r--drivers/qe/uec.c59
-rw-r--r--drivers/qe/uec.h3
-rw-r--r--drivers/qe/uec_phy.c181
-rw-r--r--include/config_phylib_all_drivers.h32
-rw-r--r--include/configs/MPC8323ERDB.h4
-rw-r--r--include/configs/MPC832XEMDS.h4
-rw-r--r--include/configs/MPC8360EMDS.h4
-rw-r--r--include/configs/MPC8360ERDK.h4
-rw-r--r--include/configs/MPC8568MDS.h4
-rw-r--r--include/configs/MPC8569MDS.h20
-rw-r--r--include/configs/kmeter1.h2
-rw-r--r--include/fsl_mdio.h62
-rw-r--r--include/linux/ethtool.h721
-rw-r--r--include/linux/mdio.h278
-rw-r--r--include/miiphy.h53
-rw-r--r--include/phy.h229
-rw-r--r--include/tsec.h302
-rw-r--r--net/eth.c6
52 files changed, 4902 insertions, 2322 deletions
diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c
index 0c166fd..520cb90 100644
--- a/arch/powerpc/cpu/mpc8xxx/fdt.c
+++ b/arch/powerpc/cpu/mpc8xxx/fdt.c
@@ -27,8 +27,8 @@
#include <libfdt.h>
#include <fdt_support.h>
#include <asm/mp.h>
-#include <asm/fsl_enet.h>
#include <asm/fsl_serdes.h>
+#include <phy.h>
#if defined(CONFIG_MP) && (defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx))
static int ft_del_cpuhandle(void *blob, int cpuhandle)
@@ -218,27 +218,10 @@ void fdt_fixup_crypto_node(void *blob, int sec_rev)
}
#endif
-int fdt_fixup_phy_connection(void *blob, int offset, enum fsl_phy_enet_if phyc)
+int fdt_fixup_phy_connection(void *blob, int offset, phy_interface_t phyc)
{
- static const char *fsl_phy_enet_if_str[] = {
- [MII] = "mii",
- [RMII] = "rmii",
- [GMII] = "gmii",
- [RGMII] = "rgmii",
- [RGMII_ID] = "rgmii-id",
- [RGMII_RXID] = "rgmii-rxid",
- [SGMII] = "sgmii",
- [TBI] = "tbi",
- [RTBI] = "rtbi",
- [XAUI] = "xgmii",
- [FSL_ETH_IF_NONE] = "",
- };
-
- if (phyc > ARRAY_SIZE(fsl_phy_enet_if_str))
- return fdt_setprop_string(blob, offset, "phy-connection-type", "");
-
return fdt_setprop_string(blob, offset, "phy-connection-type",
- fsl_phy_enet_if_str[phyc]);
+ phy_string_for_interface(phyc));
}
#ifdef CONFIG_SYS_SRIO
diff --git a/arch/powerpc/include/asm/config.h b/arch/powerpc/include/asm/config.h
index 536f142..624d8c2 100644
--- a/arch/powerpc/include/asm/config.h
+++ b/arch/powerpc/include/asm/config.h
@@ -80,6 +80,15 @@
#endif
#endif
+/* The TSEC driver uses the PHYLIB infrastructure */
+#ifndef CONFIG_PHYLIB
+#if defined(CONFIG_TSEC_ENET)
+#define CONFIG_PHYLIB
+
+#include <config_phylib_all_drivers.h>
+#endif /* TSEC_ENET */
+#endif /* !CONFIG_PHYLIB */
+
/* All PPC boards must swap IDE bytes */
#define CONFIG_IDE_SWAP_IO
diff --git a/arch/powerpc/include/asm/fsl_enet.h b/arch/powerpc/include/asm/fsl_enet.h
index 4fb2857..8227b66 100644
--- a/arch/powerpc/include/asm/fsl_enet.h
+++ b/arch/powerpc/include/asm/fsl_enet.h
@@ -13,21 +13,18 @@
#ifndef __ASM_PPC_FSL_ENET_H
#define __ASM_PPC_FSL_ENET_H
-enum fsl_phy_enet_if {
- MII,
- RMII,
- GMII,
- RGMII,
- RGMII_ID,
- RGMII_RXID,
- RGMII_TXID,
- SGMII,
- TBI,
- RTBI,
- XAUI,
- FSL_ETH_IF_NONE,
-};
+#include <phy.h>
-int fdt_fixup_phy_connection(void *blob, int offset, enum fsl_phy_enet_if phyc);
+struct tsec_mii_mng {
+ u32 miimcfg; /* MII management configuration reg */
+ u32 miimcom; /* MII management command reg */
+ u32 miimadd; /* MII management address reg */
+ u32 miimcon; /* MII management control reg */
+ u32 miimstat; /* MII management status reg */
+ u32 miimind; /* MII management indication reg */
+ u32 ifstat; /* Interface Status Register */
+} __attribute__ ((packed));
+
+int fdt_fixup_phy_connection(void *blob, int offset, phy_interface_t phyc);
#endif /* __ASM_PPC_FSL_ENET_H */
diff --git a/board/freescale/mpc8360emds/mpc8360emds.c b/board/freescale/mpc8360emds/mpc8360emds.c
index 0babd26..51d8035 100644
--- a/board/freescale/mpc8360emds/mpc8360emds.c
+++ b/board/freescale/mpc8360emds/mpc8360emds.c
@@ -16,6 +16,7 @@
#include <mpc83xx.h>
#include <i2c.h>
#include <miiphy.h>
+#include <phy.h>
#if defined(CONFIG_PCI)
#include <pci.h>
#endif
@@ -160,8 +161,9 @@ int board_eth_init(bd_t *bd)
int i;
for (i = 0; i < ARRAY_SIZE(uec_info); i++)
- uec_info[i].enet_interface_type = RGMII_RXID;
- uec_info[i].speed = 1000;
+ uec_info[i].enet_interface_type =
+ PHY_INTERFACE_MODE_RGMII_RXID;
+ uec_info[i].speed = SPEED_1000;
}
return uec_eth_init(bd, uec_info, ARRAY_SIZE(uec_info));
}
@@ -398,7 +400,7 @@ void ft_board_setup(void *blob, bd_t *bd)
"phy-connection-type", 0);
if (prop && (strcmp(prop, "rgmii-id") == 0))
fdt_fixup_phy_connection(blob, path,
- RGMII_RXID);
+ PHY_INTERFACE_MODE_RGMII_RXID);
}
#endif
#if defined(CONFIG_HAS_ETH1)
@@ -410,7 +412,7 @@ void ft_board_setup(void *blob, bd_t *bd)
"phy-connection-type", 0);
if (prop && (strcmp(prop, "rgmii-id") == 0))
fdt_fixup_phy_connection(blob, path,
- RGMII_RXID);
+ PHY_INTERFACE_MODE_RGMII_RXID);
}
#endif
}
diff --git a/board/freescale/mpc837xemds/mpc837xemds.c b/board/freescale/mpc837xemds/mpc837xemds.c
index 51dd692..650a4fe 100644
--- a/board/freescale/mpc837xemds/mpc837xemds.c
+++ b/board/freescale/mpc837xemds/mpc837xemds.c
@@ -21,6 +21,8 @@
#include <libfdt.h>
#include <fdt_support.h>
#include <fsl_esdhc.h>
+#include <fsl_mdio.h>
+#include <phy.h>
#include "pci.h"
#include "../common/pq-mds-pib.h"
@@ -86,6 +88,7 @@ int board_mmc_init(bd_t *bd)
#if defined(CONFIG_TSEC1) || defined(CONFIG_TSEC2)
int board_eth_init(bd_t *bd)
{
+ struct fsl_pq_mdio_info mdio_info;
struct tsec_info_struct tsec_info[2];
struct immap __iomem *im = (struct immap __iomem *)CONFIG_SYS_IMMR;
u32 rcwh = in_be32(&im->reset.rcwh);
@@ -131,6 +134,11 @@ int board_eth_init(bd_t *bd)
}
num++;
#endif
+
+ mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
+ mdio_info.name = DEFAULT_MII_NAME;
+ fsl_pq_mdio_init(bd, &mdio_info);
+
return tsec_eth_init(bd, tsec_info, num);
}
@@ -148,7 +156,7 @@ static void __ft_tsec_fixup(void *blob, bd_t *bd, const char *alias,
return;
}
- err = fdt_fixup_phy_connection(blob, off, SGMII);
+ err = fdt_fixup_phy_connection(blob, off, PHY_INTERFACE_MODE_SGMII);
if (err) {
printf("WARNING: could not set phy-connection-type for %s: "
diff --git a/board/freescale/mpc8536ds/mpc8536ds.c b/board/freescale/mpc8536ds/mpc8536ds.c
index f83f629..b292e13 100644
--- a/board/freescale/mpc8536ds/mpc8536ds.c
+++ b/board/freescale/mpc8536ds/mpc8536ds.c
@@ -36,6 +36,7 @@
#include <libfdt.h>
#include <spd_sdram.h>
#include <fdt_support.h>
+#include <fsl_mdio.h>
#include <tsec.h>
#include <netdev.h>
#include <sata.h>
@@ -234,6 +235,7 @@ int board_early_init_r(void)
int board_eth_init(bd_t *bis)
{
#ifdef CONFIG_TSEC_ENET
+ struct fsl_pq_mdio_info mdio_info;
struct tsec_info_struct tsec_info[2];
int num = 0;
@@ -268,6 +270,10 @@ int board_eth_init(bd_t *bis)
}
#endif
+ mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
+ mdio_info.name = DEFAULT_MII_NAME;
+ fsl_pq_mdio_init(bis, &mdio_info);
+
tsec_eth_init(bis, tsec_info, num);
#endif
return pci_eth_init(bis);
diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c
index a48c815..6fe8d39 100644
--- a/board/freescale/mpc8544ds/mpc8544ds.c
+++ b/board/freescale/mpc8544ds/mpc8544ds.c
@@ -33,6 +33,7 @@
#include <miiphy.h>
#include <libfdt.h>
#include <fdt_support.h>
+#include <fsl_mdio.h>
#include <tsec.h>
#include <netdev.h>
@@ -248,9 +249,35 @@ get_board_sys_clk(ulong dummy)
return val;
}
+
+#define MIIM_CIS8204_SLED_CON 0x1b
+#define MIIM_CIS8204_SLEDCON_INIT 0x1115
+/*
+ * Hack to write all 4 PHYs with the LED values
+ */
+int board_phy_config(struct phy_device *phydev)
+{
+ static int do_once;
+ uint phyid;
+ struct mii_dev *bus = phydev->bus;
+
+ if (do_once)
+ return 0;
+
+ for (phyid = 0; phyid < 4; phyid++)
+ bus->write(bus, phyid, MDIO_DEVAD_NONE, MIIM_CIS8204_SLED_CON,
+ MIIM_CIS8204_SLEDCON_INIT);
+
+ do_once = 1;
+
+ return 0;
+}
+
+
int board_eth_init(bd_t *bis)
{
#ifdef CONFIG_TSEC_ENET
+ struct fsl_pq_mdio_info mdio_info;
struct tsec_info_struct tsec_info[2];
int num = 0;
@@ -282,6 +309,9 @@ int board_eth_init(bd_t *bis)
fsl_sgmii_riser_init(tsec_info, num);
}
+ mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
+ mdio_info.name = DEFAULT_MII_NAME;
+ fsl_pq_mdio_init(bis, &mdio_info);
tsec_eth_init(bis, tsec_info, num);
#endif
diff --git a/board/freescale/mpc8569mds/mpc8569mds.c b/board/freescale/mpc8569mds/mpc8569mds.c
index ecda222..89557d2 100644
--- a/board/freescale/mpc8569mds/mpc8569mds.c
+++ b/board/freescale/mpc8569mds/mpc8569mds.c
@@ -39,6 +39,7 @@
#include <libfdt.h>
#include <fdt_support.h>
#include <fsl_esdhc.h>
+#include <phy.h>
#include "bcsr.h"
#if defined(CONFIG_PQ_MDS_PIB)
@@ -550,7 +551,8 @@ void ft_board_setup(void *blob, bd_t *bd)
break;
}
- err = fdt_fixup_phy_connection(blob, nodeoff, RMII);
+ err = fdt_fixup_phy_connection(blob, nodeoff,
+ PHY_INTERFACE_MODE_RMII);
if (err < 0) {
printf("WARNING: could not set phy-connection-type "
diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c
index f444805..b20299e 100644
--- a/board/freescale/mpc8572ds/mpc8572ds.c
+++ b/board/freescale/mpc8572ds/mpc8572ds.c
@@ -35,6 +35,7 @@
#include <libfdt.h>
#include <fdt_support.h>
#include <tsec.h>
+#include <fsl_mdio.h>
#include <netdev.h>
#include "../common/sgmii_riser.h"
@@ -187,6 +188,7 @@ int board_early_init_r(void)
#ifdef CONFIG_TSEC_ENET
int board_eth_init(bd_t *bis)
{
+ struct fsl_pq_mdio_info mdio_info;
struct tsec_info_struct tsec_info[4];
int num = 0;
@@ -233,6 +235,10 @@ int board_eth_init(bd_t *bis)
fsl_sgmii_riser_init(tsec_info, num);
#endif
+ mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
+ mdio_info.name = DEFAULT_MII_NAME;
+ fsl_pq_mdio_init(bis, &mdio_info);
+
tsec_eth_init(bis, tsec_info, num);
return pci_eth_init(bis);
diff --git a/board/freescale/p1022ds/p1022ds.c b/board/freescale/p1022ds/p1022ds.c
index 8b78404..73a1021 100644
--- a/board/freescale/p1022ds/p1022ds.c
+++ b/board/freescale/p1022ds/p1022ds.c
@@ -22,6 +22,7 @@
#include <asm/io.h>
#include <libfdt.h>
#include <fdt_support.h>
+#include <fsl_mdio.h>
#include <tsec.h>
#include <asm/fsl_law.h>
#include <netdev.h>
@@ -279,6 +280,7 @@ int board_early_init_r(void)
*/
int board_eth_init(bd_t *bis)
{
+ struct fsl_pq_mdio_info mdio_info;
struct tsec_info_struct tsec_info[2];
unsigned int num = 0;
@@ -291,6 +293,10 @@ int board_eth_init(bd_t *bis)
num++;
#endif
+ mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
+ mdio_info.name = DEFAULT_MII_NAME;
+ fsl_pq_mdio_init(bis, &mdio_info);
+
return tsec_eth_init(bis, tsec_info, num) + pci_eth_init(bis);
}
diff --git a/board/freescale/p1_p2_rdb/p1_p2_rdb.c b/board/freescale/p1_p2_rdb/p1_p2_rdb.c
index 307c3e2..0b4ae9d 100644
--- a/board/freescale/p1_p2_rdb/p1_p2_rdb.c
+++ b/board/freescale/p1_p2_rdb/p1_p2_rdb.c
@@ -31,6 +31,7 @@
#include <miiphy.h>
#include <libfdt.h>
#include <fdt_support.h>
+#include <fsl_mdio.h>
#include <tsec.h>
#include <vsc7385.h>
#include <netdev.h>
@@ -179,6 +180,7 @@ int board_early_init_r(void)
#ifdef CONFIG_TSEC_ENET
int board_eth_init(bd_t *bis)
{
+ struct fsl_pq_mdio_info mdio_info;
struct tsec_info_struct tsec_info[4];
int num = 0;
char *tmp;
@@ -216,6 +218,10 @@ int board_eth_init(bd_t *bis)
puts("No address specified for VSC7385 microcode.\n");
#endif
+ mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
+ mdio_info.name = DEFAULT_MII_NAME;
+ fsl_pq_mdio_init(bis, &mdio_info);
+
tsec_eth_init(bis, tsec_info, num);
return pci_eth_init(bis);
diff --git a/board/freescale/p2020ds/p2020ds.c b/board/freescale/p2020ds/p2020ds.c
index 238b4d9..d3af6cf 100644
--- a/board/freescale/p2020ds/p2020ds.c
+++ b/board/freescale/p2020ds/p2020ds.c
@@ -34,6 +34,7 @@
#include <miiphy.h>
#include <libfdt.h>
#include <fdt_support.h>
+#include <fsl_mdio.h>
#include <tsec.h>
#include <asm/fsl_law.h>
#include <netdev.h>
@@ -201,6 +202,7 @@ int board_early_init_r(void)
#ifdef CONFIG_TSEC_ENET
int board_eth_init(bd_t *bis)
{
+ struct fsl_pq_mdio_info mdio_info;
struct tsec_info_struct tsec_info[4];
int num = 0;
@@ -235,6 +237,11 @@ int board_eth_init(bd_t *bis)
fsl_sgmii_riser_init(tsec_info, num);
#endif
+ mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
+ mdio_info.name = DEFAULT_MII_NAME;
+
+ fsl_pq_mdio_init(bis, &mdio_info);
+
tsec_eth_init(bis, tsec_info, num);
return pci_eth_init(bis);
diff --git a/common/Makefile b/common/Makefile
index 4fb050e..f81cff9 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -117,7 +117,11 @@ COBJS-$(CONFIG_CMD_MFSL) += cmd_mfsl.o
COBJS-$(CONFIG_CMD_MG_DISK) += cmd_mgdisk.o
COBJS-$(CONFIG_MII) += miiphyutil.o
COBJS-$(CONFIG_CMD_MII) += miiphyutil.o
+COBJS-$(CONFIG_PHYLIB) += miiphyutil.o
COBJS-$(CONFIG_CMD_MII) += cmd_mii.o
+ifdef CONFIG_PHYLIB
+COBJS-$(CONFIG_CMD_MII) += cmd_mdio.o
+endif
COBJS-$(CONFIG_CMD_MISC) += cmd_misc.o
COBJS-$(CONFIG_CMD_MMC) += cmd_mmc.o
COBJS-$(CONFIG_CMD_MMC_SPI) += cmd_mmc_spi.o
diff --git a/common/cmd_mdio.c b/common/cmd_mdio.c
new file mode 100644
index 0000000..cac0703
--- /dev/null
+++ b/common/cmd_mdio.c
@@ -0,0 +1,286 @@
+/*
+ * (C) Copyright 2011 Freescale Semiconductor, Inc
+ * Andy Fleming
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * MDIO Commands
+ */
+
+#include <common.h>
+#include <command.h>
+#include <miiphy.h>
+#include <phy.h>
+
+
+static char last_op[2];
+static uint last_data;
+static uint last_addr_lo;
+static uint last_addr_hi;
+static uint last_devad_lo;
+static uint last_devad_hi;
+static uint last_reg_lo;
+static uint last_reg_hi;
+
+static int extract_range(char *input, int *plo, int *phi)
+{
+ char *end;
+ *plo = simple_strtol(input, &end, 0);
+ if (end == input)
+ return -1;
+
+ if ((*end == '-') && *(++end))
+ *phi = simple_strtol(end, NULL, 0);
+ else if (*end == '\0')
+ *phi = *plo;
+ else
+ return -1;
+
+ return 0;
+}
+
+int mdio_write_ranges(struct mii_dev *bus, int addrlo,
+ int addrhi, int devadlo, int devadhi,
+ int reglo, int reghi, unsigned short data)
+{
+ int addr, devad, reg;
+ int err = 0;
+
+ for (addr = addrlo; addr <= addrhi; addr++) {
+ for (devad = devadlo; devad <= devadhi; devad++) {
+ for (reg = reglo; reg <= reghi; reg++) {
+ err = bus->write(bus, addr, devad, reg, data);
+
+ if (err)
+ goto err_out;
+ }
+ }
+ }
+
+err_out:
+ return err;
+}
+
+int mdio_read_ranges(struct mii_dev *bus, int addrlo,
+ int addrhi, int devadlo, int devadhi,
+ int reglo, int reghi)
+{
+ int addr, devad, reg;
+
+ printf("Reading from bus %s\n", bus->name);
+ for (addr = addrlo; addr <= addrhi; addr++) {
+ printf("PHY at address %d:\n", addr);
+
+ for (devad = devadlo; devad <= devadhi; devad++) {
+ for (reg = reglo; reg <= reghi; reg++) {
+ u16 val;
+ val = bus->read(bus, addr, devad, reg);
+
+ if (val < 0) {
+ printf("Error\n");
+
+ return val;
+ }
+
+ if (devad >= 0)
+ printf("%d.", devad);
+
+ printf("%d - 0x%x\n", reg, val & 0xffff);
+ }
+ }
+ }
+
+ return 0;
+}
+
+/* The register will be in the form [a[-b].]x[-y] */
+int extract_reg_range(char *input, int *devadlo, int *devadhi,
+ int *reglo, int *reghi)
+{
+ char *regstr;
+
+ /* use strrchr to find the last string after a '.' */
+ regstr = strrchr(input, '.');
+
+ /* If it exists, extract the devad(s) */
+ if (regstr) {
+ char devadstr[32];
+
+ strncpy(devadstr, input, regstr - input);
+ devadstr[regstr - input] = '\0';
+
+ if (extract_range(devadstr, devadlo, devadhi))
+ return -1;
+
+ regstr++;
+ } else {
+ /* Otherwise, we have no devad, and we just got regs */
+ *devadlo = *devadhi = MDIO_DEVAD_NONE;
+
+ regstr = input;
+ }
+
+ return extract_range(regstr, reglo, reghi);
+}
+
+int extract_phy_range(char *const argv[], int argc, struct mii_dev **bus,
+ int *addrlo, int *addrhi)
+{
+ struct phy_device *phydev;
+
+ if ((argc < 1) || (argc > 2))
+ return -1;
+
+ /* If there are two arguments, it's busname addr */
+ if (argc == 2) {
+ *bus = miiphy_get_dev_by_name(argv[0]);
+
+ if (!*bus)
+ return -1;
+
+ return extract_range(argv[1], addrlo, addrhi);
+ }
+
+ /* It must be one argument, here */
+
+ /*
+ * This argument can be one of two things:
+ * 1) Ethernet device name
+ * 2) Just an address (use the previously-used bus)
+ *
+ * We check all buses for a PHY which is connected to an ethernet
+ * device by the given name. If none are found, we call
+ * extract_range() on the string, and see if it's an address range.
+ */
+ phydev = mdio_phydev_for_ethname(argv[0]);
+
+ if (phydev) {
+ *addrlo = *addrhi = phydev->addr;
+ *bus = phydev->bus;
+
+ return 0;
+ }
+
+ /* It's an address or nothing useful */
+ return extract_range(argv[0], addrlo, addrhi);
+}
+
+/* ---------------------------------------------------------------- */
+static int do_mdio(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ char op[2];
+ int addrlo, addrhi, reglo, reghi, devadlo, devadhi;
+ unsigned short data;
+ int pos = argc - 1;
+ struct mii_dev *bus;
+
+ if (argc < 2)
+ return cmd_usage(cmdtp);
+
+ /*
+ * We use the last specified parameters, unless new ones are
+ * entered.
+ */
+ op[0] = argv[1][0];
+ addrlo = last_addr_lo;
+ addrhi = last_addr_hi;
+ devadlo = last_devad_lo;
+ devadhi = last_devad_hi;
+ reglo = last_reg_lo;
+ reghi = last_reg_hi;
+ data = last_data;
+
+ bus = mdio_get_current_dev();
+
+ if (flag & CMD_FLAG_REPEAT)
+ op[0] = last_op[0];
+
+ switch (op[0]) {
+ case 'w':
+ if (pos > 1)
+ data = simple_strtoul(argv[pos--], NULL, 16);
+ case 'r':
+ if (pos > 1)
+ if (extract_reg_range(argv[pos--], &devadlo, &devadhi,
+ &reglo, &reghi))
+ return -1;
+
+ default:
+ if (pos > 1)
+ if (extract_phy_range(&(argv[2]), pos - 1, &bus,
+ &addrlo, &addrhi))
+ return -1;
+
+ break;
+ }
+
+ if (op[0] == 'l') {
+ mdio_list_devices();
+
+ return 0;
+ }
+
+ /* Save the chosen bus */
+ miiphy_set_current_dev(bus->name);
+
+ switch (op[0]) {
+ case 'w':
+ mdio_write_ranges(bus, addrlo, addrhi, devadlo, devadhi,
+ reglo, reghi, data);
+ break;
+
+ case 'r':
+ mdio_read_ranges(bus, addrlo, addrhi, devadlo, devadhi,
+ reglo, reghi);
+ break;
+ }
+
+ /*
+ * Save the parameters for repeats.
+ */
+ last_op[0] = op[0];
+ last_addr_lo = addrlo;
+ last_addr_hi = addrhi;
+ last_devad_lo = devadlo;
+ last_devad_hi = devadhi;
+ last_reg_lo = reglo;
+ last_reg_hi = reghi;
+ last_data = data;
+
+ return 0;
+}
+
+/***************************************************/
+
+U_BOOT_CMD(
+ mdio, 6, 1, do_mdio,
+ "MDIO utility commands",
+ "list - List MDIO buses\n"
+ "mdio read <phydev> [<devad>.]<reg> - "
+ "read PHY's register at <devad>.<reg>\n"
+ "mdio write <phydev> [<devad>.]<reg> <data> - "
+ "write PHY's register at <devad>.<reg>\n"
+ "<phydev> may be:\n"
+ " <busname> <addr>\n"
+ " <addr>\n"
+ " <eth name>\n"
+ "<addr> <devad>, and <reg> may be ranges, e.g. 1-5.4-0x1f.\n"
+);
diff --git a/common/miiphyutil.c b/common/miiphyutil.c
index e282096..243cae9 100644
--- a/common/miiphyutil.c
+++ b/common/miiphyutil.c
@@ -28,6 +28,7 @@
#include <common.h>
#include <miiphy.h>
+#include <phy.h>
#include <asm/types.h>
#include <linux/list.h>
@@ -39,27 +40,18 @@
#undef debug
#ifdef MII_DEBUG
-#define debug(fmt,args...) printf (fmt ,##args)
+#define debug(fmt, args...) printf(fmt, ##args)
#else
-#define debug(fmt,args...)
+#define debug(fmt, args...)
#endif /* MII_DEBUG */
-struct mii_dev {
- struct list_head link;
- const char *name;
- int (*read) (const char *devname, unsigned char addr,
- unsigned char reg, unsigned short *value);
- int (*write) (const char *devname, unsigned char addr,
- unsigned char reg, unsigned short value);
-};
-
static struct list_head mii_devs;
static struct mii_dev *current_mii;
/*
* Lookup the mii_dev struct by the registered device name.
*/
-static struct mii_dev *miiphy_get_dev_by_name(const char *devname, int quiet)
+struct mii_dev *miiphy_get_dev_by_name(const char *devname)
{
struct list_head *entry;
struct mii_dev *dev;
@@ -75,8 +67,6 @@ static struct mii_dev *miiphy_get_dev_by_name(const char *devname, int quiet)
return dev;
}
- if (!quiet)
- printf("No such device: %s\n", devname);
return NULL;
}
@@ -86,74 +76,190 @@ static struct mii_dev *miiphy_get_dev_by_name(const char *devname, int quiet)
*/
void miiphy_init(void)
{
- INIT_LIST_HEAD (&mii_devs);
+ INIT_LIST_HEAD(&mii_devs);
current_mii = NULL;
}
+static int legacy_miiphy_read(struct mii_dev *bus, int addr, int devad, int reg)
+{
+ unsigned short val;
+ int ret;
+ struct legacy_mii_dev *ldev = bus->priv;
+
+ ret = ldev->read(bus->name, addr, reg, &val);
+
+ return ret ? -1 : (int)val;
+}
+
+static int legacy_miiphy_write(struct mii_dev *bus, int addr, int devad,
+ int reg, u16 val)
+{
+ struct legacy_mii_dev *ldev = bus->priv;
+
+ return ldev->write(bus->name, addr, reg, val);
+}
+
/*****************************************************************************
*
* Register read and write MII access routines for the device <name>.
*/
void miiphy_register(const char *name,
- int (*read) (const char *devname, unsigned char addr,
+ int (*read)(const char *devname, unsigned char addr,
unsigned char reg, unsigned short *value),
- int (*write) (const char *devname, unsigned char addr,
+ int (*write)(const char *devname, unsigned char addr,
unsigned char reg, unsigned short value))
{
struct mii_dev *new_dev;
+ struct legacy_mii_dev *ldev;
unsigned int name_len;
- char *new_name;
/* check if we have unique name */
- new_dev = miiphy_get_dev_by_name(name, 1);
+ new_dev = miiphy_get_dev_by_name(name);
if (new_dev) {
printf("miiphy_register: non unique device name '%s'\n", name);
return;
}
/* allocate memory */
- name_len = strlen (name);
- new_dev =
- (struct mii_dev *)malloc (sizeof (struct mii_dev) + name_len + 1);
+ name_len = strlen(name);
+ if (name_len > MDIO_NAME_LEN - 1) {
+ /* Hopefully this won't happen, but if it does, we'll know */
+ printf("miiphy_register: MDIO name was longer than %d\n",
+ MDIO_NAME_LEN);
+ return;
+ }
+
+ new_dev = mdio_alloc();
+ ldev = malloc(sizeof(*ldev));
- if (new_dev == NULL) {
- printf ("miiphy_register: cannot allocate memory for '%s'\n",
+ if (new_dev == NULL || ldev == NULL) {
+ printf("miiphy_register: cannot allocate memory for '%s'\n",
name);
return;
}
- memset (new_dev, 0, sizeof (struct mii_dev) + name_len);
/* initalize mii_dev struct fields */
- INIT_LIST_HEAD (&new_dev->link);
- new_dev->read = read;
- new_dev->write = write;
- new_dev->name = new_name = (char *)(new_dev + 1);
- strncpy (new_name, name, name_len);
- new_name[name_len] = '\0';
+ new_dev->read = legacy_miiphy_read;
+ new_dev->write = legacy_miiphy_write;
+ sprintf(new_dev->name, name);
+ ldev->read = read;
+ ldev->write = write;
+ new_dev->priv = ldev;
- debug ("miiphy_register: added '%s', read=0x%08lx, write=0x%08lx\n",
- new_dev->name, new_dev->read, new_dev->write);
+ debug("miiphy_register: added '%s', read=0x%08lx, write=0x%08lx\n",
+ new_dev->name, ldev->read, ldev->write);
/* add it to the list */
- list_add_tail (&new_dev->link, &mii_devs);
+ list_add_tail(&new_dev->link, &mii_devs);
if (!current_mii)
current_mii = new_dev;
}
+struct mii_dev *mdio_alloc(void)
+{
+ struct mii_dev *bus;
+
+ bus = malloc(sizeof(*bus));
+ if (!bus)
+ return bus;
+
+ memset(bus, 0, sizeof(*bus));
+
+ /* initalize mii_dev struct fields */
+ INIT_LIST_HEAD(&bus->link);
+
+ return bus;
+}
+
+int mdio_register(struct mii_dev *bus)
+{
+ if (!bus || !bus->name || !bus->read || !bus->write)
+ return -1;
+
+ /* check if we have unique name */
+ if (miiphy_get_dev_by_name(bus->name)) {
+ printf("mdio_register: non unique device name '%s'\n",
+ bus->name);
+ return -1;
+ }
+
+ /* add it to the list */
+ list_add_tail(&bus->link, &mii_devs);
+
+ if (!current_mii)
+ current_mii = bus;
+
+ return 0;
+}
+
+void mdio_list_devices(void)
+{
+ struct list_head *entry;
+
+ list_for_each(entry, &mii_devs) {
+ int i;
+ struct mii_dev *bus = list_entry(entry, struct mii_dev, link);
+
+ printf("%s:\n", bus->name);
+
+ for (i = 0; i < PHY_MAX_ADDR; i++) {
+ struct phy_device *phydev = bus->phymap[i];
+
+ if (phydev) {
+ printf("%d - %s", i, phydev->drv->name);
+
+ if (phydev->dev)
+ printf(" <--> %s\n", phydev->dev->name);
+ else
+ printf("\n");
+ }
+ }
+ }
+}
+
int miiphy_set_current_dev(const char *devname)
{
struct mii_dev *dev;
- dev = miiphy_get_dev_by_name(devname, 0);
+ dev = miiphy_get_dev_by_name(devname);
if (dev) {
current_mii = dev;
return 0;
}
+ printf("No such device: %s\n", devname);
+
return 1;
}
+struct mii_dev *mdio_get_current_dev(void)
+{
+ return current_mii;
+}
+
+struct phy_device *mdio_phydev_for_ethname(const char *ethname)
+{
+ struct list_head *entry;
+ struct mii_dev *bus;
+
+ list_for_each(entry, &mii_devs) {
+ int i;
+ bus = list_entry(entry, struct mii_dev, link);
+
+ for (i = 0; i < PHY_MAX_ADDR; i++) {
+ if (!bus->phymap[i] || !bus->phymap[i]->dev)
+ continue;
+
+ if (strcmp(bus->phymap[i]->dev->name, ethname) == 0)
+ return bus->phymap[i];
+ }
+ }
+
+ printf("%s is not a known ethernet\n", ethname);
+ return NULL;
+}
+
const char *miiphy_get_current_dev(void)
{
if (current_mii)
@@ -187,13 +293,15 @@ static struct mii_dev *miiphy_get_active_dev(const char *devname)
int miiphy_read(const char *devname, unsigned char addr, unsigned char reg,
unsigned short *value)
{
- struct mii_dev *dev;
+ struct mii_dev *bus;
- dev = miiphy_get_active_dev(devname);
- if (dev)
- return dev->read(devname, addr, reg, value);
+ bus = miiphy_get_active_dev(devname);
+ if (bus)
+ *value = bus->read(bus, addr, MDIO_DEVAD_NONE, reg);
+ else
+ return 1;
- return 1;
+ return (*value < 0) ? 1 : 0;
}
/*****************************************************************************
@@ -207,11 +315,11 @@ int miiphy_read(const char *devname, unsigned char addr, unsigned char reg,
int miiphy_write(const char *devname, unsigned char addr, unsigned char reg,
unsigned short value)
{
- struct mii_dev *dev;
+ struct mii_dev *bus;
- dev = miiphy_get_active_dev(devname);
- if (dev)
- return dev->write(devname, addr, reg, value);
+ bus = miiphy_get_active_dev(devname);
+ if (bus)
+ return bus->write(bus, addr, MDIO_DEVAD_NONE, reg, value);
return 1;
}
@@ -220,20 +328,20 @@ int miiphy_write(const char *devname, unsigned char addr, unsigned char reg,
*
* Print out list of registered MII capable devices.
*/
-void miiphy_listdev (void)
+void miiphy_listdev(void)
{
struct list_head *entry;
struct mii_dev *dev;
- puts ("MII devices: ");
- list_for_each (entry, &mii_devs) {
- dev = list_entry (entry, struct mii_dev, link);
- printf ("'%s' ", dev->name);
+ puts("MII devices: ");
+ list_for_each(entry, &mii_devs) {
+ dev = list_entry(entry, struct mii_dev, link);
+ printf("'%s' ", dev->name);
}
- puts ("\n");
+ puts("\n");
if (current_mii)
- printf ("Current device: '%s'\n", current_mii->name);
+ printf("Current device: '%s'\n", current_mii->name);
}
/*****************************************************************************
@@ -253,32 +361,33 @@ int miiphy_info(const char *devname, unsigned char addr, unsigned int *oui,
unsigned int reg = 0;
unsigned short tmp;
- if (miiphy_read (devname, addr, MII_PHYSID2, &tmp) != 0) {
- debug ("PHY ID register 2 read failed\n");
- return (-1);
+ if (miiphy_read(devname, addr, MII_PHYSID2, &tmp) != 0) {
+ debug("PHY ID register 2 read failed\n");
+ return -1;
}
reg = tmp;
- debug ("MII_PHYSID2 @ 0x%x = 0x%04x\n", addr, reg);
+ debug("MII_PHYSID2 @ 0x%x = 0x%04x\n", addr, reg);
if (reg == 0xFFFF) {
/* No physical device present at this address */
- return (-1);
+ return -1;
}
- if (miiphy_read (devname, addr, MII_PHYSID1, &tmp) != 0) {
- debug ("PHY ID register 1 read failed\n");
- return (-1);
+ if (miiphy_read(devname, addr, MII_PHYSID1, &tmp) != 0) {
+ debug("PHY ID register 1 read failed\n");
+ return -1;
}
reg |= tmp << 16;
- debug ("PHY_PHYIDR[1,2] @ 0x%x = 0x%08x\n", addr, reg);
+ debug("PHY_PHYIDR[1,2] @ 0x%x = 0x%08x\n", addr, reg);
*oui = (reg >> 10);
*model = (unsigned char)((reg >> 4) & 0x0000003F);
*rev = (unsigned char)(reg & 0x0000000F);
- return (0);
+ return 0;
}
+#ifndef CONFIG_PHYLIB
/*****************************************************************************
*
* Reset the PHY.
@@ -290,16 +399,16 @@ int miiphy_reset(const char *devname, unsigned char addr)
unsigned short reg;
int timeout = 500;
- if (miiphy_read (devname, addr, MII_BMCR, &reg) != 0) {
- debug ("PHY status read failed\n");
- return (-1);
+ if (miiphy_read(devname, addr, MII_BMCR, &reg) != 0) {
+ debug("PHY status read failed\n");
+ return -1;
}
- if (miiphy_write (devname, addr, MII_BMCR, reg | BMCR_RESET) != 0) {
- debug ("PHY reset failed\n");
- return (-1);
+ if (miiphy_write(devname, addr, MII_BMCR, reg | BMCR_RESET) != 0) {
+ debug("PHY reset failed\n");
+ return -1;
}
#ifdef CONFIG_PHY_RESET_DELAY
- udelay (CONFIG_PHY_RESET_DELAY); /* Intel LXT971A needs this */
+ udelay(CONFIG_PHY_RESET_DELAY); /* Intel LXT971A needs this */
#endif
/*
* Poll the control register for the reset bit to go to 0 (it is
@@ -315,13 +424,14 @@ int miiphy_reset(const char *devname, unsigned char addr)
udelay(1000);
}
if ((reg & 0x8000) == 0) {
- return (0);
+ return 0;
} else {
- puts ("PHY reset timed out\n");
- return (-1);
+ puts("PHY reset timed out\n");
+ return -1;
}
- return (0);
+ return 0;
}
+#endif /* !PHYLIB */
/*****************************************************************************
*
@@ -338,33 +448,32 @@ int miiphy_speed(const char *devname, unsigned char addr)
* Check for 1000BASE-X. If it is supported, then assume that the speed
* is 1000.
*/
- if (miiphy_is_1000base_x (devname, addr)) {
+ if (miiphy_is_1000base_x(devname, addr))
return _1000BASET;
- }
+
/*
* No 1000BASE-X, so assume 1000BASE-T/100BASE-TX/10BASE-T register set.
*/
/* Check for 1000BASE-T. */
- if (miiphy_read (devname, addr, MII_STAT1000, &btsr)) {
- printf ("PHY 1000BT status");
+ if (miiphy_read(devname, addr, MII_STAT1000, &btsr)) {
+ printf("PHY 1000BT status");
goto miiphy_read_failed;
}
if (btsr != 0xFFFF &&
- (btsr & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD))) {
+ (btsr & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)))
return _1000BASET;
- }
#endif /* CONFIG_PHY_GIGE */
/* Check Basic Management Control Register first. */
- if (miiphy_read (devname, addr, MII_BMCR, &bmcr)) {
- printf ("PHY speed");
+ if (miiphy_read(devname, addr, MII_BMCR, &bmcr)) {
+ printf("PHY speed");
goto miiphy_read_failed;
}
/* Check if auto-negotiation is on. */
if (bmcr & BMCR_ANENABLE) {
/* Get auto-negotiation results. */
- if (miiphy_read (devname, addr, MII_LPA, &anlpar)) {
- printf ("PHY AN speed");
+ if (miiphy_read(devname, addr, MII_LPA, &anlpar)) {
+ printf("PHY AN speed");
goto miiphy_read_failed;
}
return (anlpar & LPA_100) ? _100BASET : _10BASET;
@@ -373,7 +482,7 @@ int miiphy_speed(const char *devname, unsigned char addr)
return (bmcr & BMCR_SPEED100) ? _100BASET : _10BASET;
miiphy_read_failed:
- printf (" read failed, assuming 10BASE-T\n");
+ printf(" read failed, assuming 10BASE-T\n");
return _10BASET;
}
@@ -389,10 +498,10 @@ int miiphy_duplex(const char *devname, unsigned char addr)
u16 btsr;
/* Check for 1000BASE-X. */
- if (miiphy_is_1000base_x (devname, addr)) {
+ if (miiphy_is_1000base_x(devname, addr)) {
/* 1000BASE-X */
- if (miiphy_read (devname, addr, MII_LPA, &anlpar)) {
- printf ("1000BASE-X PHY AN duplex");
+ if (miiphy_read(devname, addr, MII_LPA, &anlpar)) {
+ printf("1000BASE-X PHY AN duplex");
goto miiphy_read_failed;
}
}
@@ -400,8 +509,8 @@ int miiphy_duplex(const char *devname, unsigned char addr)
* No 1000BASE-X, so assume 1000BASE-T/100BASE-TX/10BASE-T register set.
*/
/* Check for 1000BASE-T. */
- if (miiphy_read (devname, addr, MII_STAT1000, &btsr)) {
- printf ("PHY 1000BT status");
+ if (miiphy_read(devname, addr, MII_STAT1000, &btsr)) {
+ printf("PHY 1000BT status");
goto miiphy_read_failed;
}
if (btsr != 0xFFFF) {
@@ -414,15 +523,15 @@ int miiphy_duplex(const char *devname, unsigned char addr)
#endif /* CONFIG_PHY_GIGE */
/* Check Basic Management Control Register first. */
- if (miiphy_read (devname, addr, MII_BMCR, &bmcr)) {
- puts ("PHY duplex");
+ if (miiphy_read(devname, addr, MII_BMCR, &bmcr)) {
+ puts("PHY duplex");
goto miiphy_read_failed;
}
/* Check if auto-negotiation is on. */
if (bmcr & BMCR_ANENABLE) {
/* Get auto-negotiation results. */
- if (miiphy_read (devname, addr, MII_LPA, &anlpar)) {
- puts ("PHY AN duplex");
+ if (miiphy_read(devname, addr, MII_LPA, &anlpar)) {
+ puts("PHY AN duplex");
goto miiphy_read_failed;
}
return (anlpar & (LPA_10FULL | LPA_100FULL)) ?
@@ -432,7 +541,7 @@ int miiphy_duplex(const char *devname, unsigned char addr)
return (bmcr & BMCR_FULLDPLX) ? FULL : HALF;
miiphy_read_failed:
- printf (" read failed, assuming half duplex\n");
+ printf(" read failed, assuming half duplex\n");
return HALF;
}
@@ -446,8 +555,8 @@ int miiphy_is_1000base_x(const char *devname, unsigned char addr)
#if defined(CONFIG_PHY_GIGE)
u16 exsr;
- if (miiphy_read (devname, addr, MII_ESTATUS, &exsr)) {
- printf ("PHY extended status read failed, assuming no "
+ if (miiphy_read(devname, addr, MII_ESTATUS, &exsr)) {
+ printf("PHY extended status read failed, assuming no "
"1000BASE-X\n");
return 0;
}
@@ -467,17 +576,17 @@ int miiphy_link(const char *devname, unsigned char addr)
unsigned short reg;
/* dummy read; needed to latch some phys */
- (void)miiphy_read (devname, addr, MII_BMSR, &reg);
- if (miiphy_read (devname, addr, MII_BMSR, &reg)) {
- puts ("MII_BMSR read failed, assuming no link\n");
- return (0);
+ (void)miiphy_read(devname, addr, MII_BMSR, &reg);
+ if (miiphy_read(devname, addr, MII_BMSR, &reg)) {
+ puts("MII_BMSR read failed, assuming no link\n");
+ return 0;
}
/* Determine if a link is active */
if ((reg & BMSR_LSTATUS) != 0) {
- return (1);
+ return 1;
} else {
- return (0);
+ return 0;
}
}
#endif
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index fd9d0b4..819b197 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -79,7 +79,7 @@ COBJS-$(CONFIG_TIGON3) += tigon3.o
COBJS-$(CONFIG_TIGON3) += bcm570x_autoneg.o
COBJS-$(CONFIG_TIGON3) += 5701rls.o
COBJS-$(CONFIG_DRIVER_TI_EMAC) += davinci_emac.o
-COBJS-$(CONFIG_TSEC_ENET) += tsec.o
+COBJS-$(CONFIG_TSEC_ENET) += tsec.o fsl_mdio.o
COBJS-$(CONFIG_TSI108_ETH) += tsi108_eth.o
COBJS-$(CONFIG_ULI526X) += uli526x.o
COBJS-$(CONFIG_VSC7385_ENET) += vsc7385.o
diff --git a/drivers/net/dm9000x.c b/drivers/net/dm9000x.c
index 709f67a..b5c5573 100644
--- a/drivers/net/dm9000x.c
+++ b/drivers/net/dm9000x.c
@@ -110,8 +110,8 @@ static board_info_t dm9000_info;
/* function declaration ------------------------------------- */
static int dm9000_probe(void);
-static u16 phy_read(int);
-static void phy_write(int, u16);
+static u16 dm9000_phy_read(int);
+static void dm9000_phy_write(int, u16);
static u8 DM9000_ior(int);
static void DM9000_iow(int reg, u8 value);
@@ -361,7 +361,7 @@ static int dm9000_init(struct eth_device *dev, bd_t *bd)
DM9000_iow(DM9000_IMR, IMR_PAR);
i = 0;
- while (!(phy_read(1) & 0x20)) { /* autonegation complete bit */
+ while (!(dm9000_phy_read(1) & 0x20)) { /* autonegation complete bit */
udelay(1000);
i++;
if (i == 10000) {
@@ -371,7 +371,7 @@ static int dm9000_init(struct eth_device *dev, bd_t *bd)
}
/* see what we've got */
- lnk = phy_read(17) >> 12;
+ lnk = dm9000_phy_read(17) >> 12;
printf("operating at ");
switch (lnk) {
case 1:
@@ -445,7 +445,7 @@ static void dm9000_halt(struct eth_device *netdev)
DM9000_DBG("%s\n", __func__);
/* RESET devie */
- phy_write(0, 0x8000); /* PHY RESET */
+ dm9000_phy_write(0, 0x8000); /* PHY RESET */
DM9000_iow(DM9000_GPR, 0x01); /* Power-Down PHY */
DM9000_iow(DM9000_IMR, 0x80); /* Disable all interrupt */
DM9000_iow(DM9000_RCR, 0x00); /* Disable RX */
@@ -581,7 +581,7 @@ DM9000_iow(int reg, u8 value)
Read a word from phyxcer
*/
static u16
-phy_read(int reg)
+dm9000_phy_read(int reg)
{
u16 val;
@@ -593,7 +593,7 @@ phy_read(int reg)
val = (DM9000_ior(DM9000_EPDRH) << 8) | DM9000_ior(DM9000_EPDRL);
/* The read data keeps on REG_0D & REG_0E */
- DM9000_DBG("phy_read(0x%x): 0x%x\n", reg, val);
+ DM9000_DBG("dm9000_phy_read(0x%x): 0x%x\n", reg, val);
return val;
}
@@ -601,7 +601,7 @@ phy_read(int reg)
Write a word to phyxcer
*/
static void
-phy_write(int reg, u16 value)
+dm9000_phy_write(int reg, u16 value)
{
/* Fill the phyxcer register into REG_0C */
@@ -613,7 +613,7 @@ phy_write(int reg, u16 value)
DM9000_iow(DM9000_EPCR, 0xa); /* Issue phyxcer write command */
udelay(500); /* Wait write complete */
DM9000_iow(DM9000_EPCR, 0x0); /* Clear phyxcer write command */
- DM9000_DBG("phy_write(reg:0x%x, value:0x%x)\n", reg, value);
+ DM9000_DBG("dm9000_phy_write(reg:0x%x, value:0x%x)\n", reg, value);
}
int dm9000_initialize(bd_t *bis)
diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c
index 6c161b6..d55cacd 100644
--- a/drivers/net/enc28j60.c
+++ b/drivers/net/enc28j60.c
@@ -314,7 +314,7 @@ static void enc_release_bus(enc_dev_t *enc)
/*
* Read PHY register
*/
-static u16 phy_read(enc_dev_t *enc, const u8 addr)
+static u16 enc_phy_read(enc_dev_t *enc, const u8 addr)
{
uint64_t etime;
u8 status;
@@ -339,7 +339,7 @@ static u16 phy_read(enc_dev_t *enc, const u8 addr)
/*
* Write PHY register
*/
-static void phy_write(enc_dev_t *enc, const u8 addr, const u16 data)
+static void enc_phy_write(enc_dev_t *enc, const u8 addr, const u16 data)
{
uint64_t etime;
u8 status;
@@ -374,7 +374,7 @@ static int enc_phy_link_wait(enc_dev_t *enc)
#ifdef CONFIG_ENC_SILENTLINK
/* check if we have a link, then just return */
- status = phy_read(enc, PHY_REG_PHSTAT1);
+ status = enc_phy_read(enc, PHY_REG_PHSTAT1);
if (status & ENC_PHSTAT1_LLSTAT)
return 0;
#endif
@@ -382,10 +382,10 @@ static int enc_phy_link_wait(enc_dev_t *enc)
/* wait for link with 1 second timeout */
etime = get_ticks() + get_tbclk();
while (get_ticks() <= etime) {
- status = phy_read(enc, PHY_REG_PHSTAT1);
+ status = enc_phy_read(enc, PHY_REG_PHSTAT1);
if (status & ENC_PHSTAT1_LLSTAT) {
/* now we have a link */
- status = phy_read(enc, PHY_REG_PHSTAT2);
+ status = enc_phy_read(enc, PHY_REG_PHSTAT2);
duplex = (status & ENC_PHSTAT2_DPXSTAT) ? 1 : 0;
printf("%s: link up, 10Mbps %s-duplex\n",
enc->dev->name, duplex ? "full" : "half");
@@ -678,8 +678,8 @@ static int enc_setup(enc_dev_t *enc)
enc->bank = 0xff; /* invalidate current bank in enc28j60 */
/* verify PHY identification */
- phid1 = phy_read(enc, PHY_REG_PHID1);
- phid2 = phy_read(enc, PHY_REG_PHID2) & ENC_PHID2_MASK;
+ phid1 = enc_phy_read(enc, PHY_REG_PHID1);
+ phid2 = enc_phy_read(enc, PHY_REG_PHID2) & ENC_PHID2_MASK;
if (phid1 != ENC_PHID1_VALUE || phid2 != ENC_PHID2_VALUE) {
printf("%s: failed to identify PHY. Found %04x:%04x\n",
enc->dev->name, phid1, phid2);
@@ -694,7 +694,7 @@ static int enc_setup(enc_dev_t *enc)
* Prevent automatic loopback of data beeing transmitted by setting
* ENC_PHCON2_HDLDIS
*/
- phy_write(enc, PHY_REG_PHCON2, (1<<8));
+ enc_phy_write(enc, PHY_REG_PHCON2, (1<<8));
/*
* LEDs configuration
@@ -702,10 +702,10 @@ static int enc_setup(enc_dev_t *enc)
* LEDB: LBCFG = 0111 -> display TX & RX activity
* STRCH = 1 -> LED pulses
*/
- phy_write(enc, PHY_REG_PHLCON, 0x0472);
+ enc_phy_write(enc, PHY_REG_PHLCON, 0x0472);
/* Reset PDPXMD-bit => half duplex */
- phy_write(enc, PHY_REG_PHCON1, 0);
+ enc_phy_write(enc, PHY_REG_PHCON1, 0);
#ifdef CONFIG_USE_IRQ
/* enable interrupts */
@@ -771,7 +771,7 @@ int enc_miiphy_read(const char *devname, u8 phy_adr, u8 reg, u16 *value)
enc_release_bus(enc);
return -1;
}
- *value = phy_read(enc, reg);
+ *value = enc_phy_read(enc, reg);
enc_release_bus(enc);
return 0;
}
@@ -796,7 +796,7 @@ int enc_miiphy_write(const char *devname, u8 phy_adr, u8 reg, u16 value)
enc_release_bus(enc);
return -1;
}
- phy_write(enc, reg, value);
+ enc_phy_write(enc, reg, value);
enc_release_bus(enc);
return 0;
}
diff --git a/drivers/net/fsl_mdio.c b/drivers/net/fsl_mdio.c
new file mode 100644
index 0000000..1aab307
--- /dev/null
+++ b/drivers/net/fsl_mdio.c
@@ -0,0 +1,120 @@
+/*
+ * Copyright 2009-2010 Freescale Semiconductor, Inc.
+ * Jun-jie Zhang <b18070@freescale.com>
+ * Mingkai Hu <Mingkai.hu@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <miiphy.h>
+#include <phy.h>
+#include <fsl_mdio.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <asm/fsl_enet.h>
+
+void tsec_local_mdio_write(struct tsec_mii_mng *phyregs, int port_addr,
+ int dev_addr, int regnum, int value)
+{
+ int timeout = 1000000;
+
+ out_be32(&phyregs->miimadd, (port_addr << 8) | (regnum & 0x1f));
+ out_be32(&phyregs->miimcon, value);
+ asm("sync");
+
+ while ((in_be32(&phyregs->miimind) & MIIMIND_BUSY) && timeout--)
+ ;
+}
+
+int tsec_local_mdio_read(struct tsec_mii_mng *phyregs, int port_addr,
+ int dev_addr, int regnum)
+{
+ int value;
+ int timeout = 1000000;
+
+ /* Put the address of the phy, and the register
+ * number into MIIMADD */
+ out_be32(&phyregs->miimadd, (port_addr << 8) | (regnum & 0x1f));
+
+ /* Clear the command register, and wait */
+ out_be32(&phyregs->miimcom, 0);
+ asm("sync");
+
+ /* Initiate a read command, and wait */
+ out_be32(&phyregs->miimcom, MIIMCOM_READ_CYCLE);
+ asm("sync");
+
+ /* Wait for the the indication that the read is done */
+ while ((in_be32(&phyregs->miimind) & (MIIMIND_NOTVALID | MIIMIND_BUSY))
+ && timeout--)
+ ;
+
+ /* Grab the value read from the PHY */
+ value = in_be32(&phyregs->miimstat);
+
+ return value;
+}
+
+static int fsl_pq_mdio_reset(struct mii_dev *bus)
+{
+ struct tsec_mii_mng *regs = bus->priv;
+
+ /* Reset MII (due to new addresses) */
+ out_be32(&regs->miimcfg, MIIMCFG_RESET_MGMT);
+
+ out_be32(&regs->miimcfg, MIIMCFG_INIT_VALUE);
+
+ while (in_be32(&regs->miimind) & MIIMIND_BUSY)
+ ;
+
+ return 0;
+}
+
+int tsec_phy_read(struct mii_dev *bus, int addr, int dev_addr, int regnum)
+{
+ struct tsec_mii_mng *phyregs = bus->priv;
+
+ return tsec_local_mdio_read(phyregs, addr, dev_addr, regnum);
+}
+
+int tsec_phy_write(struct mii_dev *bus, int addr, int dev_addr, int regnum,
+ u16 value)
+{
+ struct tsec_mii_mng *phyregs = bus->priv;
+
+ tsec_local_mdio_write(phyregs, addr, dev_addr, regnum, value);
+
+ return 0;
+}
+
+int fsl_pq_mdio_init(bd_t *bis, struct fsl_pq_mdio_info *info)
+{
+ struct mii_dev *bus = mdio_alloc();
+
+ if (!bus) {
+ printf("Failed to allocate FSL MDIO bus\n");
+ return -1;
+ }
+
+ bus->read = tsec_phy_read;
+ bus->write = tsec_phy_write;
+ bus->reset = fsl_pq_mdio_reset;
+ sprintf(bus->name, info->name);
+
+ bus->priv = info->regs;
+
+ return mdio_register(bus);
+}
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index bba8901..a59834b 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -28,6 +28,19 @@ LIB := $(obj)libphy.o
COBJS-$(CONFIG_BITBANGMII) += miiphybb.o
COBJS-$(CONFIG_MV88E61XX_SWITCH) += mv88e61xx.o
+COBJS-$(CONFIG_PHYLIB) += phy.o
+COBJS-$(CONFIG_PHYLIB_10G) += generic_10g.o
+COBJS-$(CONFIG_PHY_ATHEROS) += atheros.o
+COBJS-$(CONFIG_PHY_BROADCOM) += broadcom.o
+COBJS-$(CONFIG_PHY_DAVICOM) += davicom.o
+COBJS-$(CONFIG_PHY_LXT) += lxt.o
+COBJS-$(CONFIG_PHY_MARVELL) += marvell.o
+COBJS-$(CONFIG_PHY_MICREL) += micrel.o
+COBJS-$(CONFIG_PHY_NATSEMI) += natsemi.o
+COBJS-$(CONFIG_PHY_REALTEK) += realtek.o
+COBJS-$(CONFIG_PHY_TERANETICS) += teranetics.o
+COBJS-$(CONFIG_PHY_VITESSE) += vitesse.o
+
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/drivers/net/phy/atheros.c b/drivers/net/phy/atheros.c
new file mode 100644
index 0000000..798473d
--- /dev/null
+++ b/drivers/net/phy/atheros.c
@@ -0,0 +1,48 @@
+/*
+ * Atheros PHY drivers
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * author Andy Fleming
+ *
+ */
+#include <phy.h>
+
+static int ar8021_config(struct phy_device *phydev)
+{
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05);
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x3D47);
+
+ return 0;
+}
+
+struct phy_driver AR8021_driver = {
+ .name = "AR8021",
+ .uid = 0x4dd040,
+ .mask = 0xfffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = ar8021_config,
+ .startup = genphy_startup,
+ .shutdown = genphy_shutdown,
+};
+
+int phy_atheros_init(void)
+{
+ phy_register(&AR8021_driver);
+
+ return 0;
+}
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
new file mode 100644
index 0000000..427ac60
--- /dev/null
+++ b/drivers/net/phy/broadcom.c
@@ -0,0 +1,288 @@
+/*
+ * Broadcom PHY drivers
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ * author Andy Fleming
+ *
+ */
+#include <config.h>
+#include <common.h>
+#include <phy.h>
+
+/* Broadcom BCM54xx -- taken from linux sungem_phy */
+#define MIIM_BCM54xx_AUXCNTL 0x18
+#define MIIM_BCM54xx_AUXCNTL_ENCODE(val) (((val & 0x7) << 12)|(val & 0x7))
+#define MIIM_BCM54xx_AUXSTATUS 0x19
+#define MIIM_BCM54xx_AUXSTATUS_LINKMODE_MASK 0x0700
+#define MIIM_BCM54xx_AUXSTATUS_LINKMODE_SHIFT 8
+
+#define MIIM_BCM54XX_SHD 0x1c
+#define MIIM_BCM54XX_SHD_WRITE 0x8000
+#define MIIM_BCM54XX_SHD_VAL(x) ((x & 0x1f) << 10)
+#define MIIM_BCM54XX_SHD_DATA(x) ((x & 0x3ff) << 0)
+#define MIIM_BCM54XX_SHD_WR_ENCODE(val, data) \
+ (MIIM_BCM54XX_SHD_WRITE | MIIM_BCM54XX_SHD_VAL(val) | \
+ MIIM_BCM54XX_SHD_DATA(data))
+
+#define MIIM_BCM54XX_EXP_DATA 0x15 /* Expansion register data */
+#define MIIM_BCM54XX_EXP_SEL 0x17 /* Expansion register select */
+#define MIIM_BCM54XX_EXP_SEL_SSD 0x0e00 /* Secondary SerDes select */
+#define MIIM_BCM54XX_EXP_SEL_ER 0x0f00 /* Expansion register select */
+
+/* Broadcom BCM5461S */
+static int bcm5461_config(struct phy_device *phydev)
+{
+ genphy_config_aneg(phydev);
+
+ phy_reset(phydev);
+
+ return 0;
+}
+
+static int bcm54xx_parse_status(struct phy_device *phydev)
+{
+ unsigned int mii_reg;
+
+ mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_BCM54xx_AUXSTATUS);
+
+ switch ((mii_reg & MIIM_BCM54xx_AUXSTATUS_LINKMODE_MASK) >>
+ MIIM_BCM54xx_AUXSTATUS_LINKMODE_SHIFT) {
+ case 1:
+ phydev->duplex = DUPLEX_HALF;
+ phydev->speed = SPEED_10;
+ break;
+ case 2:
+ phydev->duplex = DUPLEX_FULL;
+ phydev->speed = SPEED_10;
+ break;
+ case 3:
+ phydev->duplex = DUPLEX_HALF;
+ phydev->speed = SPEED_100;
+ break;
+ case 5:
+ phydev->duplex = DUPLEX_FULL;
+ phydev->speed = SPEED_100;
+ break;
+ case 6:
+ phydev->duplex = DUPLEX_HALF;
+ phydev->speed = SPEED_1000;
+ break;
+ case 7:
+ phydev->duplex = DUPLEX_FULL;
+ phydev->speed = SPEED_1000;
+ break;
+ default:
+ printf("Auto-neg error, defaulting to 10BT/HD\n");
+ phydev->duplex = DUPLEX_HALF;
+ phydev->speed = SPEED_10;
+ break;
+ }
+
+ return 0;
+}
+
+static int bcm54xx_startup(struct phy_device *phydev)
+{
+ /* Read the Status (2x to make sure link is right) */
+ genphy_update_link(phydev);
+ bcm54xx_parse_status(phydev);
+
+ return 0;
+}
+
+/* Broadcom BCM5482S */
+/*
+ * "Ethernet@Wirespeed" needs to be enabled to achieve link in certain
+ * circumstances. eg a gigabit TSEC connected to a gigabit switch with
+ * a 4-wire ethernet cable. Both ends advertise gigabit, but can't
+ * link. "Ethernet@Wirespeed" reduces advertised speed until link
+ * can be achieved.
+ */
+static u32 bcm5482_read_wirespeed(struct phy_device *phydev, u32 reg)
+{
+ return (phy_read(phydev, MDIO_DEVAD_NONE, reg) & 0x8FFF) | 0x8010;
+}
+
+static int bcm5482_config(struct phy_device *phydev)
+{
+ unsigned int reg;
+
+ /* reset the PHY */
+ reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR);
+ reg |= BMCR_RESET;
+ phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, reg);
+
+ /* Setup read from auxilary control shadow register 7 */
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54xx_AUXCNTL,
+ MIIM_BCM54xx_AUXCNTL_ENCODE(7));
+ /* Read Misc Control register and or in Ethernet@Wirespeed */
+ reg = bcm5482_read_wirespeed(phydev, MIIM_BCM54xx_AUXCNTL);
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54xx_AUXCNTL, reg);
+
+ /* Initial config/enable of secondary SerDes interface */
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_SHD,
+ MIIM_BCM54XX_SHD_WR_ENCODE(0x14, 0xf));
+ /* Write intial value to secondary SerDes Contol */
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_EXP_SEL,
+ MIIM_BCM54XX_EXP_SEL_SSD | 0);
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_EXP_DATA,
+ BMCR_ANRESTART);
+ /* Enable copper/fiber auto-detect */
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_SHD,
+ MIIM_BCM54XX_SHD_WR_ENCODE(0x1e, 0x201));
+
+ genphy_config_aneg(phydev);
+
+ return 0;
+}
+
+/*
+ * Find out if PHY is in copper or serdes mode by looking at Expansion Reg
+ * 0x42 - "Operating Mode Status Register"
+ */
+static int bcm5482_is_serdes(struct phy_device *phydev)
+{
+ u16 val;
+ int serdes = 0;
+
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_EXP_SEL,
+ MIIM_BCM54XX_EXP_SEL_ER | 0x42);
+ val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_EXP_DATA);
+
+ switch (val & 0x1f) {
+ case 0x0d: /* RGMII-to-100Base-FX */
+ case 0x0e: /* RGMII-to-SGMII */
+ case 0x0f: /* RGMII-to-SerDes */
+ case 0x12: /* SGMII-to-SerDes */
+ case 0x13: /* SGMII-to-100Base-FX */
+ case 0x16: /* SerDes-to-Serdes */
+ serdes = 1;
+ break;
+ case 0x6: /* RGMII-to-Copper */
+ case 0x14: /* SGMII-to-Copper */
+ case 0x17: /* SerDes-to-Copper */
+ break;
+ default:
+ printf("ERROR, invalid PHY mode (0x%x\n)", val);
+ break;
+ }
+
+ return serdes;
+}
+
+/*
+ * Determine SerDes link speed and duplex from Expansion reg 0x42 "Operating
+ * Mode Status Register"
+ */
+static u32 bcm5482_parse_serdes_sr(struct phy_device *phydev)
+{
+ u16 val;
+ int i = 0;
+
+ /* Wait 1s for link - Clause 37 autonegotiation happens very fast */
+ while (1) {
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_EXP_SEL,
+ MIIM_BCM54XX_EXP_SEL_ER | 0x42);
+ val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_BCM54XX_EXP_DATA);
+
+ if (val & 0x8000)
+ break;
+
+ if (i++ > 1000) {
+ phydev->link = 0;
+ return 1;
+ }
+
+ udelay(1000); /* 1 ms */
+ }
+
+ phydev->link = 1;
+ switch ((val >> 13) & 0x3) {
+ case (0x00):
+ phydev->speed = 10;
+ break;
+ case (0x01):
+ phydev->speed = 100;
+ break;
+ case (0x02):
+ phydev->speed = 1000;
+ break;
+ }
+
+ phydev->duplex = (val & 0x1000) == 0x1000;
+
+ return 0;
+}
+
+/*
+ * Figure out if BCM5482 is in serdes or copper mode and determine link
+ * configuration accordingly
+ */
+static int bcm5482_startup(struct phy_device *phydev)
+{
+ if (bcm5482_is_serdes(phydev)) {
+ bcm5482_parse_serdes_sr(phydev);
+ phydev->port = PORT_FIBRE;
+ } else {
+ /* Wait for auto-negotiation to complete or fail */
+ genphy_update_link(phydev);
+ /* Parse BCM54xx copper aux status register */
+ bcm54xx_parse_status(phydev);
+ }
+
+ return 0;
+}
+
+static struct phy_driver BCM5461S_driver = {
+ .name = "Broadcom BCM5461S",
+ .uid = 0x2060c0,
+ .mask = 0xfffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &bcm5461_config,
+ .startup = &bcm54xx_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+static struct phy_driver BCM5464S_driver = {
+ .name = "Broadcom BCM5464S",
+ .uid = 0x2060b0,
+ .mask = 0xfffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &bcm5461_config,
+ .startup = &bcm54xx_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+static struct phy_driver BCM5482S_driver = {
+ .name = "Broadcom BCM5482S",
+ .uid = 0x143bcb0,
+ .mask = 0xffffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &bcm5482_config,
+ .startup = &bcm5482_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+int phy_broadcom_init(void)
+{
+ phy_register(&BCM5482S_driver);
+ phy_register(&BCM5464S_driver);
+ phy_register(&BCM5461S_driver);
+
+ return 0;
+}
diff --git a/drivers/net/phy/davicom.c b/drivers/net/phy/davicom.c
new file mode 100644
index 0000000..e96a4af
--- /dev/null
+++ b/drivers/net/phy/davicom.c
@@ -0,0 +1,98 @@
+/*
+ * Davicom PHY drivers
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ * author Andy Fleming
+ *
+ */
+#include <phy.h>
+
+#define MIIM_DM9161_SCR 0x10
+#define MIIM_DM9161_SCR_INIT 0x0610
+
+/* DM9161 Specified Configuration and Status Register */
+#define MIIM_DM9161_SCSR 0x11
+#define MIIM_DM9161_SCSR_100F 0x8000
+#define MIIM_DM9161_SCSR_100H 0x4000
+#define MIIM_DM9161_SCSR_10F 0x2000
+#define MIIM_DM9161_SCSR_10H 0x1000
+
+/* DM9161 10BT Configuration/Status */
+#define MIIM_DM9161_10BTCSR 0x12
+#define MIIM_DM9161_10BTCSR_INIT 0x7800
+
+
+/* Davicom DM9161E */
+static int dm9161_config(struct phy_device *phydev)
+{
+ phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, BMCR_ISOLATE);
+ /* Do not bypass the scrambler/descrambler */
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_DM9161_SCR,
+ MIIM_DM9161_SCR_INIT);
+ /* Clear 10BTCSR to default */
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_DM9161_10BTCSR,
+ MIIM_DM9161_10BTCSR_INIT);
+
+ genphy_config_aneg(phydev);
+
+ return 0;
+}
+
+static int dm9161_parse_status(struct phy_device *phydev)
+{
+ int mii_reg;
+
+ mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_DM9161_SCSR);
+
+ if (mii_reg & (MIIM_DM9161_SCSR_100F | MIIM_DM9161_SCSR_100H))
+ phydev->speed = SPEED_100;
+ else
+ phydev->speed = SPEED_10;
+
+ if (mii_reg & (MIIM_DM9161_SCSR_100F | MIIM_DM9161_SCSR_10F))
+ phydev->duplex = DUPLEX_FULL;
+ else
+ phydev->duplex = DUPLEX_HALF;
+
+ return 0;
+}
+
+static int dm9161_startup(struct phy_device *phydev)
+{
+ genphy_update_link(phydev);
+ dm9161_parse_status(phydev);
+
+ return 0;
+}
+
+static struct phy_driver DM9161_driver = {
+ .name = "Davicom DM9161E",
+ .uid = 0x181b880,
+ .mask = 0xffffff0,
+ .features = PHY_BASIC_FEATURES,
+ .config = &dm9161_config,
+ .startup = &dm9161_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+int phy_davicom_init(void)
+{
+ phy_register(&DM9161_driver);
+
+ return 0;
+}
diff --git a/drivers/net/phy/generic_10g.c b/drivers/net/phy/generic_10g.c
new file mode 100644
index 0000000..315c508
--- /dev/null
+++ b/drivers/net/phy/generic_10g.c
@@ -0,0 +1,105 @@
+/*
+ * Generic PHY Management code
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ *
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * author Andy Fleming
+ *
+ * Based loosely off of Linux's PHY Lib
+ */
+
+#include <config.h>
+#include <common.h>
+#include <miiphy.h>
+#include <phy.h>
+
+int gen10g_shutdown(struct phy_device *phydev)
+{
+ return 0;
+}
+
+int gen10g_startup(struct phy_device *phydev)
+{
+ int devad, reg;
+ u32 mmd_mask = phydev->mmds;
+
+ phydev->link = 1;
+
+ /* For now just lie and say it's 10G all the time */
+ phydev->speed = SPEED_10000;
+ phydev->duplex = DUPLEX_FULL;
+
+ for (devad = 0; mmd_mask; devad++, mmd_mask = mmd_mask >> 1) {
+ if (!mmd_mask & 1)
+ continue;
+
+ /* Read twice because link state is latched and a
+ * read moves the current state into the register */
+ phy_read(phydev, devad, MDIO_STAT1);
+ reg = phy_read(phydev, devad, MDIO_STAT1);
+ if (reg < 0 || !(reg & MDIO_STAT1_LSTATUS))
+ phydev->link = 0;
+ }
+
+ return 0;
+}
+
+int gen10g_discover_mmds(struct phy_device *phydev)
+{
+ int mmd, stat2, devs1, devs2;
+
+ /* Assume PHY must have at least one of PMA/PMD, WIS, PCS, PHY
+ * XS or DTE XS; give up if none is present. */
+ for (mmd = 1; mmd <= 5; mmd++) {
+ /* Is this MMD present? */
+ stat2 = phy_read(phydev, mmd, MDIO_STAT2);
+ if (stat2 < 0 ||
+ (stat2 & MDIO_STAT2_DEVPRST) != MDIO_STAT2_DEVPRST_VAL)
+ continue;
+
+ /* It should tell us about all the other MMDs */
+ devs1 = phy_read(phydev, mmd, MDIO_DEVS1);
+ devs2 = phy_read(phydev, mmd, MDIO_DEVS2);
+ if (devs1 < 0 || devs2 < 0)
+ continue;
+
+ phydev->mmds = devs1 | (devs2 << 16);
+ return 0;
+ }
+
+ return 0;
+}
+
+int gen10g_config(struct phy_device *phydev)
+{
+ /* For now, assume 10000baseT. Fill in later */
+ phydev->supported = phydev->advertising = SUPPORTED_10000baseT_Full;
+
+ return gen10g_discover_mmds(phydev);
+}
+
+struct phy_driver gen10g_driver = {
+ .uid = 0xffffffff,
+ .mask = 0xffffffff,
+ .name = "Generic 10G PHY",
+ .features = 0,
+ .config = gen10g_config,
+ .startup = gen10g_startup,
+ .shutdown = gen10g_shutdown,
+};
+
diff --git a/drivers/net/phy/lxt.c b/drivers/net/phy/lxt.c
new file mode 100644
index 0000000..d67bbdd
--- /dev/null
+++ b/drivers/net/phy/lxt.c
@@ -0,0 +1,87 @@
+/*
+ * LXT PHY drivers
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ * author Andy Fleming
+ *
+ */
+#include <phy.h>
+
+/* LXT971 Status 2 registers */
+#define MIIM_LXT971_SR2 0x11 /* Status Register 2 */
+#define MIIM_LXT971_SR2_SPEED_MASK 0x4200
+#define MIIM_LXT971_SR2_10HDX 0x0000 /* 10 Mbit half duplex selected */
+#define MIIM_LXT971_SR2_10FDX 0x0200 /* 10 Mbit full duplex selected */
+#define MIIM_LXT971_SR2_100HDX 0x4000 /* 100 Mbit half duplex selected */
+#define MIIM_LXT971_SR2_100FDX 0x4200 /* 100 Mbit full duplex selected */
+
+
+/* LXT971 */
+static int lxt971_parse_status(struct phy_device *phydev)
+{
+ int mii_reg;
+ int speed;
+
+ mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_LXT971_SR2);
+ speed = mii_reg & MIIM_LXT971_SR2_SPEED_MASK;
+
+ switch (speed) {
+ case MIIM_LXT971_SR2_10HDX:
+ phydev->speed = SPEED_10;
+ phydev->duplex = DUPLEX_HALF;
+ break;
+ case MIIM_LXT971_SR2_10FDX:
+ phydev->speed = SPEED_10;
+ phydev->duplex = DUPLEX_FULL;
+ break;
+ case MIIM_LXT971_SR2_100HDX:
+ phydev->speed = SPEED_100;
+ phydev->duplex = DUPLEX_HALF;
+ break;
+ default:
+ phydev->speed = SPEED_100;
+ phydev->duplex = DUPLEX_FULL;
+ }
+
+ return 0;
+}
+
+static int lxt971_startup(struct phy_device *phydev)
+{
+ genphy_update_link(phydev);
+ lxt971_parse_status(phydev);
+
+ return 0;
+}
+
+static struct phy_driver LXT971_driver = {
+ .name = "LXT971",
+ .uid = 0x1378e0,
+ .mask = 0xfffff0,
+ .features = PHY_BASIC_FEATURES,
+ .config = &genphy_config_aneg,
+ .startup = &lxt971_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+int phy_lxt_init(void)
+{
+ phy_register(&LXT971_driver);
+
+ return 0;
+}
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
new file mode 100644
index 0000000..bd1cdc4
--- /dev/null
+++ b/drivers/net/phy/marvell.c
@@ -0,0 +1,367 @@
+/*
+ * Marvell PHY drivers
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ * author Andy Fleming
+ *
+ */
+#include <config.h>
+#include <common.h>
+#include <phy.h>
+
+#define PHY_AUTONEGOTIATE_TIMEOUT 5000
+
+/* 88E1011 PHY Status Register */
+#define MIIM_88E1xxx_PHY_STATUS 0x11
+#define MIIM_88E1xxx_PHYSTAT_SPEED 0xc000
+#define MIIM_88E1xxx_PHYSTAT_GBIT 0x8000
+#define MIIM_88E1xxx_PHYSTAT_100 0x4000
+#define MIIM_88E1xxx_PHYSTAT_DUPLEX 0x2000
+#define MIIM_88E1xxx_PHYSTAT_SPDDONE 0x0800
+#define MIIM_88E1xxx_PHYSTAT_LINK 0x0400
+
+#define MIIM_88E1xxx_PHY_SCR 0x10
+#define MIIM_88E1xxx_PHY_MDI_X_AUTO 0x0060
+
+/* 88E1111 PHY LED Control Register */
+#define MIIM_88E1111_PHY_LED_CONTROL 24
+#define MIIM_88E1111_PHY_LED_DIRECT 0x4100
+#define MIIM_88E1111_PHY_LED_COMBINE 0x411C
+
+/* 88E1118 PHY defines */
+#define MIIM_88E1118_PHY_PAGE 22
+#define MIIM_88E1118_PHY_LED_PAGE 3
+
+/* 88E1121 PHY LED Control Register */
+#define MIIM_88E1121_PHY_LED_CTRL 16
+#define MIIM_88E1121_PHY_LED_PAGE 3
+#define MIIM_88E1121_PHY_LED_DEF 0x0030
+
+/* 88E1121 PHY IRQ Enable/Status Register */
+#define MIIM_88E1121_PHY_IRQ_EN 18
+#define MIIM_88E1121_PHY_IRQ_STATUS 19
+
+#define MIIM_88E1121_PHY_PAGE 22
+
+/* 88E1145 Extended PHY Specific Control Register */
+#define MIIM_88E1145_PHY_EXT_CR 20
+#define MIIM_M88E1145_RGMII_RX_DELAY 0x0080
+#define MIIM_M88E1145_RGMII_TX_DELAY 0x0002
+
+#define MIIM_88E1145_PHY_LED_CONTROL 24
+#define MIIM_88E1145_PHY_LED_DIRECT 0x4100
+
+#define MIIM_88E1145_PHY_PAGE 29
+#define MIIM_88E1145_PHY_CAL_OV 30
+
+#define MIIM_88E1149_PHY_PAGE 29
+
+/* Marvell 88E1011S */
+static int m88e1011s_config(struct phy_device *phydev)
+{
+ /* Reset and configure the PHY */
+ phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, BMCR_RESET);
+
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x1f);
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x200c);
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x5);
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0);
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100);
+
+ phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, BMCR_RESET);
+
+ genphy_config_aneg(phydev);
+
+ return 0;
+}
+
+/* Parse the 88E1011's status register for speed and duplex
+ * information
+ */
+static uint m88e1xxx_parse_status(struct phy_device *phydev)
+{
+ unsigned int speed;
+ unsigned int mii_reg;
+
+ mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_88E1xxx_PHY_STATUS);
+
+ if ((mii_reg & MIIM_88E1xxx_PHYSTAT_LINK) &&
+ !(mii_reg & MIIM_88E1xxx_PHYSTAT_SPDDONE)) {
+ int i = 0;
+
+ puts("Waiting for PHY realtime link");
+ while (!(mii_reg & MIIM_88E1xxx_PHYSTAT_SPDDONE)) {
+ /* Timeout reached ? */
+ if (i > PHY_AUTONEGOTIATE_TIMEOUT) {
+ puts(" TIMEOUT !\n");
+ phydev->link = 0;
+ break;
+ }
+
+ if ((i++ % 1000) == 0)
+ putc('.');
+ udelay(1000);
+ mii_reg = phy_read(phydev, MDIO_DEVAD_NONE,
+ MIIM_88E1xxx_PHY_STATUS);
+ }
+ puts(" done\n");
+ udelay(500000); /* another 500 ms (results in faster booting) */
+ } else {
+ if (mii_reg & MIIM_88E1xxx_PHYSTAT_LINK)
+ phydev->link = 1;
+ else
+ phydev->link = 0;
+ }
+
+ if (mii_reg & MIIM_88E1xxx_PHYSTAT_DUPLEX)
+ phydev->duplex = DUPLEX_FULL;
+ else
+ phydev->duplex = DUPLEX_HALF;
+
+ speed = mii_reg & MIIM_88E1xxx_PHYSTAT_SPEED;
+
+ switch (speed) {
+ case MIIM_88E1xxx_PHYSTAT_GBIT:
+ phydev->speed = SPEED_1000;
+ break;
+ case MIIM_88E1xxx_PHYSTAT_100:
+ phydev->speed = SPEED_100;
+ break;
+ default:
+ phydev->speed = SPEED_10;
+ break;
+ }
+
+ return 0;
+}
+
+static int m88e1011s_startup(struct phy_device *phydev)
+{
+ genphy_update_link(phydev);
+ m88e1xxx_parse_status(phydev);
+
+ return 0;
+}
+
+/* Marvell 88E1111S */
+static int m88e1111s_config(struct phy_device *phydev)
+{
+ int reg;
+
+ if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) ||
+ (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) ||
+ (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) ||
+ (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)) {
+ reg = phy_read(phydev, MDIO_DEVAD_NONE, 0x1b);
+ reg = (reg & 0xfff0) | 0xb;
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1b, reg);
+ } else {
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1b, 0x1f);
+ }
+
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x14, 0x0cd2);
+
+ genphy_config_aneg(phydev);
+
+ phy_reset(phydev);
+
+ return 0;
+}
+
+/* Marvell 88E1118 */
+static int m88e1118_config(struct phy_device *phydev)
+{
+ /* Change Page Number */
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 0x0002);
+ /* Delay RGMII TX and RX */
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x15, 0x1070);
+ /* Change Page Number */
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 0x0003);
+ /* Adjust LED control */
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x10, 0x021e);
+ /* Change Page Number */
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 0x0000);
+
+ genphy_config_aneg(phydev);
+
+ phy_reset(phydev);
+
+ return 0;
+}
+
+static int m88e1118_startup(struct phy_device *phydev)
+{
+ /* Change Page Number */
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 0x0000);
+
+ genphy_update_link(phydev);
+ m88e1xxx_parse_status(phydev);
+
+ return 0;
+}
+
+/* Marvell 88E1121R */
+static int m88e1121_config(struct phy_device *phydev)
+{
+ int pg;
+
+ /* Configure the PHY */
+ genphy_config_aneg(phydev);
+
+ /* Switch the page to access the led register */
+ pg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_88E1121_PHY_PAGE);
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1121_PHY_PAGE,
+ MIIM_88E1121_PHY_LED_PAGE);
+ /* Configure leds */
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1121_PHY_LED_CTRL,
+ MIIM_88E1121_PHY_LED_DEF);
+ /* Restore the page pointer */
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1121_PHY_PAGE, pg);
+
+ /* Disable IRQs and de-assert interrupt */
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1121_PHY_IRQ_EN, 0);
+ phy_read(phydev, MDIO_DEVAD_NONE, MIIM_88E1121_PHY_IRQ_STATUS);
+
+ return 0;
+}
+
+/* Marvell 88E1145 */
+static int m88e1145_config(struct phy_device *phydev)
+{
+ int reg;
+
+ /* Errata E0, E1 */
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_PAGE, 0x001b);
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_CAL_OV, 0x418f);
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_PAGE, 0x0016);
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_CAL_OV, 0xa2da);
+
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1xxx_PHY_SCR,
+ MIIM_88E1xxx_PHY_MDI_X_AUTO);
+
+ reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_EXT_CR);
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
+ reg |= MIIM_M88E1145_RGMII_RX_DELAY |
+ MIIM_M88E1145_RGMII_TX_DELAY;
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_EXT_CR, reg);
+
+ genphy_config_aneg(phydev);
+
+ phy_reset(phydev);
+
+ return 0;
+}
+
+static int m88e1145_startup(struct phy_device *phydev)
+{
+ genphy_update_link(phydev);
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1145_PHY_LED_CONTROL,
+ MIIM_88E1145_PHY_LED_DIRECT);
+ m88e1xxx_parse_status(phydev);
+
+ return 0;
+}
+
+/* Marvell 88E1149S */
+static int m88e1149_config(struct phy_device *phydev)
+{
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1149_PHY_PAGE, 0x1f);
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x200c);
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1149_PHY_PAGE, 0x5);
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x0);
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100);
+
+ genphy_config_aneg(phydev);
+
+ phy_reset(phydev);
+
+ return 0;
+}
+
+
+static struct phy_driver M88E1011S_driver = {
+ .name = "Marvell 88E1011S",
+ .uid = 0x1410c60,
+ .mask = 0xffffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &m88e1011s_config,
+ .startup = &m88e1011s_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+static struct phy_driver M88E1111S_driver = {
+ .name = "Marvell 88E1111S",
+ .uid = 0x1410cc0,
+ .mask = 0xffffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &m88e1111s_config,
+ .startup = &m88e1011s_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+static struct phy_driver M88E1118_driver = {
+ .name = "Marvell 88E1118",
+ .uid = 0x1410e10,
+ .mask = 0xffffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &m88e1118_config,
+ .startup = &m88e1118_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+static struct phy_driver M88E1121R_driver = {
+ .name = "Marvell 88E1121R",
+ .uid = 0x1410cb0,
+ .mask = 0xffffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &m88e1121_config,
+ .startup = &genphy_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+static struct phy_driver M88E1145_driver = {
+ .name = "Marvell 88E1145",
+ .uid = 0x1410cd0,
+ .mask = 0xffffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &m88e1145_config,
+ .startup = &m88e1145_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+static struct phy_driver M88E1149S_driver = {
+ .name = "Marvell 88E1149S",
+ .uid = 0x1410ca0,
+ .mask = 0xffffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &m88e1149_config,
+ .startup = &m88e1011s_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+int phy_marvell_init(void)
+{
+ phy_register(&M88E1149S_driver);
+ phy_register(&M88E1145_driver);
+ phy_register(&M88E1121R_driver);
+ phy_register(&M88E1118_driver);
+ phy_register(&M88E1111S_driver);
+ phy_register(&M88E1011S_driver);
+
+ return 0;
+}
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
new file mode 100644
index 0000000..47064a1
--- /dev/null
+++ b/drivers/net/phy/micrel.c
@@ -0,0 +1,40 @@
+/*
+ * Micrel PHY drivers
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ * author Andy Fleming
+ *
+ */
+#include <phy.h>
+
+static struct phy_driver KSZ804_driver = {
+ .name = "Micrel KSZ804",
+ .uid = 0x221510,
+ .mask = 0xfffff0,
+ .features = PHY_BASIC_FEATURES,
+ .config = &genphy_config,
+ .startup = &genphy_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+int phy_micrel_init(void)
+{
+ phy_register(&KSZ804_driver);
+
+ return 0;
+}
diff --git a/drivers/net/phy/natsemi.c b/drivers/net/phy/natsemi.c
new file mode 100644
index 0000000..ea60ac1
--- /dev/null
+++ b/drivers/net/phy/natsemi.c
@@ -0,0 +1,96 @@
+/*
+ * National Semiconductor PHY drivers
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ * author Andy Fleming
+ *
+ */
+#include <phy.h>
+
+/* DP83865 Link and Auto-Neg Status Register */
+#define MIIM_DP83865_LANR 0x11
+#define MIIM_DP83865_SPD_MASK 0x0018
+#define MIIM_DP83865_SPD_1000 0x0010
+#define MIIM_DP83865_SPD_100 0x0008
+#define MIIM_DP83865_DPX_FULL 0x0002
+
+
+/* NatSemi DP83865 */
+static int dp83865_config(struct phy_device *phydev)
+{
+ phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, BMCR_RESET);
+ genphy_config_aneg(phydev);
+
+ return 0;
+}
+
+static int dp83865_parse_status(struct phy_device *phydev)
+{
+ int mii_reg;
+
+ mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_DP83865_LANR);
+
+ switch (mii_reg & MIIM_DP83865_SPD_MASK) {
+
+ case MIIM_DP83865_SPD_1000:
+ phydev->speed = SPEED_1000;
+ break;
+
+ case MIIM_DP83865_SPD_100:
+ phydev->speed = SPEED_100;
+ break;
+
+ default:
+ phydev->speed = SPEED_10;
+ break;
+
+ }
+
+ if (mii_reg & MIIM_DP83865_DPX_FULL)
+ phydev->duplex = DUPLEX_FULL;
+ else
+ phydev->duplex = DUPLEX_HALF;
+
+ return 0;
+}
+
+static int dp83865_startup(struct phy_device *phydev)
+{
+ genphy_update_link(phydev);
+ dp83865_parse_status(phydev);
+
+ return 0;
+}
+
+
+static struct phy_driver DP83865_driver = {
+ .name = "NatSemi DP83865",
+ .uid = 0x20005c70,
+ .mask = 0xfffffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &dp83865_config,
+ .startup = &dp83865_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+int phy_natsemi_init(void)
+{
+ phy_register(&DP83865_driver);
+
+ return 0;
+}
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
new file mode 100644
index 0000000..c7edcc0
--- /dev/null
+++ b/drivers/net/phy/phy.c
@@ -0,0 +1,755 @@
+/*
+ * Generic PHY Management code
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ *
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * author Andy Fleming
+ *
+ * Based loosely off of Linux's PHY Lib
+ */
+
+#include <config.h>
+#include <common.h>
+#include <malloc.h>
+#include <net.h>
+#include <command.h>
+#include <miiphy.h>
+#include <phy.h>
+#include <errno.h>
+
+/* Generic PHY support and helper functions */
+
+/**
+ * genphy_config_advert - sanitize and advertise auto-negotation parameters
+ * @phydev: target phy_device struct
+ *
+ * Description: Writes MII_ADVERTISE with the appropriate values,
+ * after sanitizing the values to make sure we only advertise
+ * what is supported. Returns < 0 on error, 0 if the PHY's advertisement
+ * hasn't changed, and > 0 if it has changed.
+ */
+int genphy_config_advert(struct phy_device *phydev)
+{
+ u32 advertise;
+ int oldadv, adv;
+ int err, changed = 0;
+
+ /* Only allow advertising what
+ * this PHY supports */
+ phydev->advertising &= phydev->supported;
+ advertise = phydev->advertising;
+
+ /* Setup standard advertisement */
+ oldadv = adv = phy_read(phydev, MDIO_DEVAD_NONE, MII_ADVERTISE);
+
+ if (adv < 0)
+ return adv;
+
+ adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP |
+ ADVERTISE_PAUSE_ASYM);
+ if (advertise & ADVERTISED_10baseT_Half)
+ adv |= ADVERTISE_10HALF;
+ if (advertise & ADVERTISED_10baseT_Full)
+ adv |= ADVERTISE_10FULL;
+ if (advertise & ADVERTISED_100baseT_Half)
+ adv |= ADVERTISE_100HALF;
+ if (advertise & ADVERTISED_100baseT_Full)
+ adv |= ADVERTISE_100FULL;
+ if (advertise & ADVERTISED_Pause)
+ adv |= ADVERTISE_PAUSE_CAP;
+ if (advertise & ADVERTISED_Asym_Pause)
+ adv |= ADVERTISE_PAUSE_ASYM;
+
+ if (adv != oldadv) {
+ err = phy_write(phydev, MDIO_DEVAD_NONE, MII_ADVERTISE, adv);
+
+ if (err < 0)
+ return err;
+ changed = 1;
+ }
+
+ /* Configure gigabit if it's supported */
+ if (phydev->supported & (SUPPORTED_1000baseT_Half |
+ SUPPORTED_1000baseT_Full)) {
+ oldadv = adv = phy_read(phydev, MDIO_DEVAD_NONE, MII_CTRL1000);
+
+ if (adv < 0)
+ return adv;
+
+ adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
+ if (advertise & SUPPORTED_1000baseT_Half)
+ adv |= ADVERTISE_1000HALF;
+ if (advertise & SUPPORTED_1000baseT_Full)
+ adv |= ADVERTISE_1000FULL;
+
+ if (adv != oldadv) {
+ err = phy_write(phydev, MDIO_DEVAD_NONE, MII_CTRL1000,
+ adv);
+
+ if (err < 0)
+ return err;
+ changed = 1;
+ }
+ }
+
+ return changed;
+}
+
+
+/**
+ * genphy_setup_forced - configures/forces speed/duplex from @phydev
+ * @phydev: target phy_device struct
+ *
+ * Description: Configures MII_BMCR to force speed/duplex
+ * to the values in phydev. Assumes that the values are valid.
+ */
+int genphy_setup_forced(struct phy_device *phydev)
+{
+ int err;
+ int ctl = 0;
+
+ phydev->pause = phydev->asym_pause = 0;
+
+ if (SPEED_1000 == phydev->speed)
+ ctl |= BMCR_SPEED1000;
+ else if (SPEED_100 == phydev->speed)
+ ctl |= BMCR_SPEED100;
+
+ if (DUPLEX_FULL == phydev->duplex)
+ ctl |= BMCR_FULLDPLX;
+
+ err = phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, ctl);
+
+ return err;
+}
+
+
+/**
+ * genphy_restart_aneg - Enable and Restart Autonegotiation
+ * @phydev: target phy_device struct
+ */
+int genphy_restart_aneg(struct phy_device *phydev)
+{
+ int ctl;
+
+ ctl = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR);
+
+ if (ctl < 0)
+ return ctl;
+
+ ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
+
+ /* Don't isolate the PHY if we're negotiating */
+ ctl &= ~(BMCR_ISOLATE);
+
+ ctl = phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, ctl);
+
+ return ctl;
+}
+
+
+/**
+ * genphy_config_aneg - restart auto-negotiation or write BMCR
+ * @phydev: target phy_device struct
+ *
+ * Description: If auto-negotiation is enabled, we configure the
+ * advertising, and then restart auto-negotiation. If it is not
+ * enabled, then we write the BMCR.
+ */
+int genphy_config_aneg(struct phy_device *phydev)
+{
+ int result;
+
+ if (AUTONEG_ENABLE != phydev->autoneg)
+ return genphy_setup_forced(phydev);
+
+ result = genphy_config_advert(phydev);
+
+ if (result < 0) /* error */
+ return result;
+
+ if (result == 0) {
+ /* Advertisment hasn't changed, but maybe aneg was never on to
+ * begin with? Or maybe phy was isolated? */
+ int ctl = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR);
+
+ if (ctl < 0)
+ return ctl;
+
+ if (!(ctl & BMCR_ANENABLE) || (ctl & BMCR_ISOLATE))
+ result = 1; /* do restart aneg */
+ }
+
+ /* Only restart aneg if we are advertising something different
+ * than we were before. */
+ if (result > 0)
+ result = genphy_restart_aneg(phydev);
+
+ return result;
+}
+
+/**
+ * genphy_update_link - update link status in @phydev
+ * @phydev: target phy_device struct
+ *
+ * Description: Update the value in phydev->link to reflect the
+ * current link value. In order to do this, we need to read
+ * the status register twice, keeping the second value.
+ */
+int genphy_update_link(struct phy_device *phydev)
+{
+ unsigned int mii_reg;
+
+ /*
+ * Wait if the link is up, and autonegotiation is in progress
+ * (ie - we're capable and it's not done)
+ */
+ mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR);
+
+ /*
+ * If we already saw the link up, and it hasn't gone down, then
+ * we don't need to wait for autoneg again
+ */
+ if (phydev->link && mii_reg & BMSR_LSTATUS)
+ return 0;
+
+ if ((mii_reg & BMSR_ANEGCAPABLE) && !(mii_reg & BMSR_ANEGCOMPLETE)) {
+ int i = 0;
+
+ printf("%s Waiting for PHY auto negotiation to complete",
+ phydev->dev->name);
+ while (!(mii_reg & BMSR_ANEGCOMPLETE)) {
+ /*
+ * Timeout reached ?
+ */
+ if (i > PHY_ANEG_TIMEOUT) {
+ printf(" TIMEOUT !\n");
+ phydev->link = 0;
+ return 0;
+ }
+
+ if (ctrlc()) {
+ puts("user interrupt!\n");
+ phydev->link = 0;
+ return -EINTR;
+ }
+
+ if ((i++ % 500) == 0)
+ printf(".");
+
+ udelay(1000); /* 1 ms */
+ mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR);
+ }
+ printf(" done\n");
+ phydev->link = 1;
+ } else {
+ /* Read the link a second time to clear the latched state */
+ mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR);
+
+ if (mii_reg & BMSR_LSTATUS)
+ phydev->link = 1;
+ else
+ phydev->link = 0;
+ }
+
+ return 0;
+}
+
+/*
+ * Generic function which updates the speed and duplex. If
+ * autonegotiation is enabled, it uses the AND of the link
+ * partner's advertised capabilities and our advertised
+ * capabilities. If autonegotiation is disabled, we use the
+ * appropriate bits in the control register.
+ *
+ * Stolen from Linux's mii.c and phy_device.c
+ */
+static int genphy_parse_link(struct phy_device *phydev)
+{
+ int mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR);
+
+ /* We're using autonegotiation */
+ if (mii_reg & BMSR_ANEGCAPABLE) {
+ u32 lpa = 0;
+ u32 gblpa = 0;
+
+ /* Check for gigabit capability */
+ if (mii_reg & BMSR_ERCAP) {
+ /* We want a list of states supported by
+ * both PHYs in the link
+ */
+ gblpa = phy_read(phydev, MDIO_DEVAD_NONE, MII_STAT1000);
+ gblpa &= phy_read(phydev,
+ MDIO_DEVAD_NONE, MII_CTRL1000) << 2;
+ }
+
+ /* Set the baseline so we only have to set them
+ * if they're different
+ */
+ phydev->speed = SPEED_10;
+ phydev->duplex = DUPLEX_HALF;
+
+ /* Check the gigabit fields */
+ if (gblpa & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)) {
+ phydev->speed = SPEED_1000;
+
+ if (gblpa & PHY_1000BTSR_1000FD)
+ phydev->duplex = DUPLEX_FULL;
+
+ /* We're done! */
+ return 0;
+ }
+
+ lpa = phy_read(phydev, MDIO_DEVAD_NONE, MII_ADVERTISE);
+ lpa &= phy_read(phydev, MDIO_DEVAD_NONE, MII_LPA);
+
+ if (lpa & (LPA_100FULL | LPA_100HALF)) {
+ phydev->speed = SPEED_100;
+
+ if (lpa & LPA_100FULL)
+ phydev->duplex = DUPLEX_FULL;
+
+ } else if (lpa & LPA_10FULL)
+ phydev->duplex = DUPLEX_FULL;
+ } else {
+ u32 bmcr = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR);
+
+ phydev->speed = SPEED_10;
+ phydev->duplex = DUPLEX_HALF;
+
+ if (bmcr & BMCR_FULLDPLX)
+ phydev->duplex = DUPLEX_FULL;
+
+ if (bmcr & BMCR_SPEED1000)
+ phydev->speed = SPEED_1000;
+ else if (bmcr & BMCR_SPEED100)
+ phydev->speed = SPEED_100;
+ }
+
+ return 0;
+}
+
+int genphy_config(struct phy_device *phydev)
+{
+ int val;
+ u32 features;
+
+ /* For now, I'll claim that the generic driver supports
+ * all possible port types */
+ features = (SUPPORTED_TP | SUPPORTED_MII
+ | SUPPORTED_AUI | SUPPORTED_FIBRE |
+ SUPPORTED_BNC);
+
+ /* Do we support autonegotiation? */
+ val = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMSR);
+
+ if (val < 0)
+ return val;
+
+ if (val & BMSR_ANEGCAPABLE)
+ features |= SUPPORTED_Autoneg;
+
+ if (val & BMSR_100FULL)
+ features |= SUPPORTED_100baseT_Full;
+ if (val & BMSR_100HALF)
+ features |= SUPPORTED_100baseT_Half;
+ if (val & BMSR_10FULL)
+ features |= SUPPORTED_10baseT_Full;
+ if (val & BMSR_10HALF)
+ features |= SUPPORTED_10baseT_Half;
+
+ if (val & BMSR_ESTATEN) {
+ val = phy_read(phydev, MDIO_DEVAD_NONE, MII_ESTATUS);
+
+ if (val < 0)
+ return val;
+
+ if (val & ESTATUS_1000_TFULL)
+ features |= SUPPORTED_1000baseT_Full;
+ if (val & ESTATUS_1000_THALF)
+ features |= SUPPORTED_1000baseT_Half;
+ }
+
+ phydev->supported = features;
+ phydev->advertising = features;
+
+ genphy_config_aneg(phydev);
+
+ return 0;
+}
+
+int genphy_startup(struct phy_device *phydev)
+{
+ genphy_update_link(phydev);
+ genphy_parse_link(phydev);
+
+ return 0;
+}
+
+int genphy_shutdown(struct phy_device *phydev)
+{
+ return 0;
+}
+
+static struct phy_driver genphy_driver = {
+ .uid = 0xffffffff,
+ .mask = 0xffffffff,
+ .name = "Generic PHY",
+ .features = 0,
+ .config = genphy_config,
+ .startup = genphy_startup,
+ .shutdown = genphy_shutdown,
+};
+
+static LIST_HEAD(phy_drivers);
+
+int phy_init(void)
+{
+#ifdef CONFIG_PHY_ATHEROS
+ phy_atheros_init();
+#endif
+#ifdef CONFIG_PHY_BROADCOM
+ phy_broadcom_init();
+#endif
+#ifdef CONFIG_PHY_DAVICOM
+ phy_davicom_init();
+#endif
+#ifdef CONFIG_PHY_LXT
+ phy_lxt_init();
+#endif
+#ifdef CONFIG_PHY_MARVELL
+ phy_marvell_init();
+#endif
+#ifdef CONFIG_PHY_MICREL
+ phy_micrel_init();
+#endif
+#ifdef CONFIG_PHY_NATSEMI
+ phy_natsemi_init();
+#endif
+#ifdef CONFIG_PHY_REALTEK
+ phy_realtek_init();
+#endif
+#ifdef CONFIG_PHY_TERANETICS
+ phy_teranetics_init();
+#endif
+#ifdef CONFIG_PHY_VITESSE
+ phy_vitesse_init();
+#endif
+
+ return 0;
+}
+
+int phy_register(struct phy_driver *drv)
+{
+ INIT_LIST_HEAD(&drv->list);
+ list_add_tail(&drv->list, &phy_drivers);
+
+ return 0;
+}
+
+int phy_probe(struct phy_device *phydev)
+{
+ int err = 0;
+
+ phydev->advertising = phydev->supported = phydev->drv->features;
+ phydev->mmds = phydev->drv->mmds;
+
+ if (phydev->drv->probe)
+ err = phydev->drv->probe(phydev);
+
+ return err;
+}
+
+static struct phy_driver *generic_for_interface(phy_interface_t interface)
+{
+#ifdef CONFIG_PHYLIB_10G
+ if (is_10g_interface(interface))
+ return &gen10g_driver;
+#endif
+
+ return &genphy_driver;
+}
+
+struct phy_driver *get_phy_driver(struct phy_device *phydev,
+ phy_interface_t interface)
+{
+ struct list_head *entry;
+ int phy_id = phydev->phy_id;
+ struct phy_driver *drv = NULL;
+
+ list_for_each(entry, &phy_drivers) {
+ drv = list_entry(entry, struct phy_driver, list);
+ if ((drv->uid & drv->mask) == (phy_id & drv->mask))
+ return drv;
+ }
+
+ /* If we made it here, there's no driver for this PHY */
+ return generic_for_interface(interface);
+}
+
+struct phy_device *phy_device_create(struct mii_dev *bus, int addr, int phy_id,
+ phy_interface_t interface)
+{
+ struct phy_device *dev;
+
+ /* We allocate the device, and initialize the
+ * default values */
+ dev = malloc(sizeof(*dev));
+ if (!dev) {
+ printf("Failed to allocate PHY device for %s:%d\n",
+ bus->name, addr);
+ return NULL;
+ }
+
+ memset(dev, 0, sizeof(*dev));
+
+ dev->duplex = -1;
+ dev->link = 1;
+ dev->interface = interface;
+
+ dev->autoneg = AUTONEG_ENABLE;
+
+ dev->addr = addr;
+ dev->phy_id = phy_id;
+ dev->bus = bus;
+
+ dev->drv = get_phy_driver(dev, interface);
+
+ phy_probe(dev);
+
+ bus->phymap[addr] = dev;
+
+ return dev;
+}
+
+/**
+ * get_phy_id - reads the specified addr for its ID.
+ * @bus: the target MII bus
+ * @addr: PHY address on the MII bus
+ * @phy_id: where to store the ID retrieved.
+ *
+ * Description: Reads the ID registers of the PHY at @addr on the
+ * @bus, stores it in @phy_id and returns zero on success.
+ */
+int get_phy_id(struct mii_dev *bus, int addr, int devad, u32 *phy_id)
+{
+ int phy_reg;
+
+ /* Grab the bits from PHYIR1, and put them
+ * in the upper half */
+ phy_reg = bus->read(bus, addr, devad, MII_PHYSID1);
+
+ if (phy_reg < 0)
+ return -EIO;
+
+ *phy_id = (phy_reg & 0xffff) << 16;
+
+ /* Grab the bits from PHYIR2, and put them in the lower half */
+ phy_reg = bus->read(bus, addr, devad, MII_PHYSID2);
+
+ if (phy_reg < 0)
+ return -EIO;
+
+ *phy_id |= (phy_reg & 0xffff);
+
+ return 0;
+}
+
+/**
+ * get_phy_device - reads the specified PHY device and returns its @phy_device struct
+ * @bus: the target MII bus
+ * @addr: PHY address on the MII bus
+ *
+ * Description: Reads the ID registers of the PHY at @addr on the
+ * @bus, then allocates and returns the phy_device to represent it.
+ */
+struct phy_device *get_phy_device(struct mii_dev *bus, int addr,
+ phy_interface_t interface)
+{
+ u32 phy_id = 0x1fffffff;
+ int i;
+ int r;
+
+ /* If we have one, return the existing device, with new interface */
+ if (bus->phymap[addr]) {
+ bus->phymap[addr]->interface = interface;
+
+ return bus->phymap[addr];
+ }
+
+ /* Try Standard (ie Clause 22) access */
+ r = get_phy_id(bus, addr, MDIO_DEVAD_NONE, &phy_id);
+ if (r)
+ return NULL;
+
+ /* If the PHY ID is mostly f's, we didn't find anything */
+ if ((phy_id & 0x1fffffff) != 0x1fffffff)
+ return phy_device_create(bus, addr, phy_id, interface);
+
+ /* Otherwise we have to try Clause 45 */
+ for (i = 1; i < 5; i++) {
+ r = get_phy_id(bus, addr, i, &phy_id);
+ if (r)
+ return NULL;
+
+ /* If the phy_id is mostly Fs, there is no device there */
+ if ((phy_id & 0x1fffffff) != 0x1fffffff)
+ break;
+ }
+
+ return phy_device_create(bus, addr, phy_id, interface);
+}
+
+int phy_reset(struct phy_device *phydev)
+{
+ int reg;
+ int timeout = 500;
+ int devad = MDIO_DEVAD_NONE;
+
+#ifdef CONFIG_PHYLIB_10G
+ /* If it's 10G, we need to issue reset through one of the MMDs */
+ if (is_10g_interface(phydev->interface)) {
+ if (!phydev->mmds)
+ gen10g_discover_mmds(phydev);
+
+ devad = ffs(phydev->mmds) - 1;
+ }
+#endif
+
+ reg = phy_read(phydev, devad, MII_BMCR);
+ if (reg < 0) {
+ debug("PHY status read failed\n");
+ return -1;
+ }
+
+ reg |= BMCR_RESET;
+
+ if (phy_write(phydev, devad, MII_BMCR, reg) < 0) {
+ debug("PHY reset failed\n");
+ return -1;
+ }
+
+#ifdef CONFIG_PHY_RESET_DELAY
+ udelay(CONFIG_PHY_RESET_DELAY); /* Intel LXT971A needs this */
+#endif
+ /*
+ * Poll the control register for the reset bit to go to 0 (it is
+ * auto-clearing). This should happen within 0.5 seconds per the
+ * IEEE spec.
+ */
+ while ((reg & BMCR_RESET) && timeout--) {
+ reg = phy_read(phydev, devad, MII_BMCR);
+
+ if (reg < 0) {
+ debug("PHY status read failed\n");
+ return -1;
+ }
+ udelay(1000);
+ }
+
+ if (reg & BMCR_RESET) {
+ puts("PHY reset timed out\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+int miiphy_reset(const char *devname, unsigned char addr)
+{
+ struct mii_dev *bus = miiphy_get_dev_by_name(devname);
+ struct phy_device *phydev;
+
+ /*
+ * miiphy_reset was only used on standard PHYs, so we'll fake it here.
+ * If later code tries to connect with the right interface, this will
+ * be corrected by get_phy_device in phy_connect()
+ */
+ phydev = get_phy_device(bus, addr, PHY_INTERFACE_MODE_MII);
+
+ return phy_reset(phydev);
+}
+
+struct phy_device *phy_connect(struct mii_dev *bus, int addr,
+ struct eth_device *dev,
+ phy_interface_t interface)
+{
+ struct phy_device *phydev;
+
+ /* Reset the bus */
+ bus->reset(bus);
+
+ /* Wait 15ms to make sure the PHY has come out of hard reset */
+ udelay(15000);
+
+ phydev = get_phy_device(bus, addr, interface);
+
+ if (!phydev) {
+ printf("Could not get PHY for %s:%d\n", bus->name, addr);
+
+ return NULL;
+ }
+
+ /* Soft Reset the PHY */
+ phy_reset(phydev);
+
+ if (phydev->dev)
+ printf("%s:%d is connected to %s. Reconnecting to %s\n",
+ bus->name, addr, phydev->dev->name, dev->name);
+
+ phydev->dev = dev;
+
+ printf("%s connected to %s\n", dev->name, phydev->drv->name);
+
+ return phydev;
+}
+
+int phy_startup(struct phy_device *phydev)
+{
+ if (phydev->drv->startup)
+ phydev->drv->startup(phydev);
+
+ return 0;
+}
+
+static int __board_phy_config(struct phy_device *phydev)
+{
+ return 0;
+}
+
+int board_phy_config(struct phy_device *phydev)
+ __attribute__((weak, alias("__board_phy_config")));
+
+int phy_config(struct phy_device *phydev)
+{
+ if (phydev->drv->config)
+ phydev->drv->config(phydev);
+
+ /* Invoke an optional board-specific helper */
+ board_phy_config(phydev);
+
+ return 0;
+}
+
+int phy_shutdown(struct phy_device *phydev)
+{
+ if (phydev->drv->shutdown)
+ phydev->drv->shutdown(phydev);
+
+ return 0;
+}
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
new file mode 100644
index 0000000..b7e2753
--- /dev/null
+++ b/drivers/net/phy/realtek.c
@@ -0,0 +1,130 @@
+/*
+ * RealTek PHY drivers
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ * author Andy Fleming
+ *
+ */
+#include <config.h>
+#include <common.h>
+#include <phy.h>
+
+#define PHY_AUTONEGOTIATE_TIMEOUT 5000
+
+/* RTL8211B PHY Status Register */
+#define MIIM_RTL8211B_PHY_STATUS 0x11
+#define MIIM_RTL8211B_PHYSTAT_SPEED 0xc000
+#define MIIM_RTL8211B_PHYSTAT_GBIT 0x8000
+#define MIIM_RTL8211B_PHYSTAT_100 0x4000
+#define MIIM_RTL8211B_PHYSTAT_DUPLEX 0x2000
+#define MIIM_RTL8211B_PHYSTAT_SPDDONE 0x0800
+#define MIIM_RTL8211B_PHYSTAT_LINK 0x0400
+
+
+/* RealTek RTL8211B */
+static int rtl8211b_config(struct phy_device *phydev)
+{
+ phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, BMCR_RESET);
+
+ genphy_config_aneg(phydev);
+
+ return 0;
+}
+
+static int rtl8211b_parse_status(struct phy_device *phydev)
+{
+ unsigned int speed;
+ unsigned int mii_reg;
+
+ mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211B_PHY_STATUS);
+
+ if (!(mii_reg & MIIM_RTL8211B_PHYSTAT_SPDDONE)) {
+ int i = 0;
+
+ /* in case of timeout ->link is cleared */
+ phydev->link = 1;
+ puts("Waiting for PHY realtime link");
+ while (!(mii_reg & MIIM_RTL8211B_PHYSTAT_SPDDONE)) {
+ /* Timeout reached ? */
+ if (i > PHY_AUTONEGOTIATE_TIMEOUT) {
+ puts(" TIMEOUT !\n");
+ phydev->link = 0;
+ break;
+ }
+
+ if ((i++ % 1000) == 0)
+ putc('.');
+ udelay(1000); /* 1 ms */
+ mii_reg = phy_read(phydev, MDIO_DEVAD_NONE,
+ MIIM_RTL8211B_PHY_STATUS);
+ }
+ puts(" done\n");
+ udelay(500000); /* another 500 ms (results in faster booting) */
+ } else {
+ if (mii_reg & MIIM_RTL8211B_PHYSTAT_LINK)
+ phydev->link = 1;
+ else
+ phydev->link = 0;
+ }
+
+ if (mii_reg & MIIM_RTL8211B_PHYSTAT_DUPLEX)
+ phydev->duplex = DUPLEX_FULL;
+ else
+ phydev->duplex = DUPLEX_HALF;
+
+ speed = (mii_reg & MIIM_RTL8211B_PHYSTAT_SPEED);
+
+ switch (speed) {
+ case MIIM_RTL8211B_PHYSTAT_GBIT:
+ phydev->speed = SPEED_1000;
+ break;
+ case MIIM_RTL8211B_PHYSTAT_100:
+ phydev->speed = SPEED_100;
+ break;
+ default:
+ phydev->speed = SPEED_10;
+ }
+
+ return 0;
+}
+
+static int rtl8211b_startup(struct phy_device *phydev)
+{
+ /* Read the Status (2x to make sure link is right) */
+ genphy_update_link(phydev);
+ rtl8211b_parse_status(phydev);
+
+ return 0;
+}
+
+static struct phy_driver RTL8211B_driver = {
+ .name = "RealTek RTL8211B",
+ .uid = 0x1cc910,
+ .mask = 0xfffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &rtl8211b_config,
+ .startup = &rtl8211b_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+int phy_realtek_init(void)
+{
+ phy_register(&RTL8211B_driver);
+
+ return 0;
+}
diff --git a/drivers/net/phy/teranetics.c b/drivers/net/phy/teranetics.c
new file mode 100644
index 0000000..a771791
--- /dev/null
+++ b/drivers/net/phy/teranetics.c
@@ -0,0 +1,62 @@
+/*
+ * Teranetics PHY drivers
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ * author Andy Fleming
+ *
+ */
+#include <config.h>
+#include <phy.h>
+
+#ifndef CONFIG_PHYLIB_10G
+#error The Teranetics PHY needs 10G support
+#endif
+
+int tn2020_config(struct phy_device *phydev)
+{
+ if (phydev->port == PORT_FIBRE) {
+ unsigned short restart_an = (MDIO_AN_CTRL1_RESTART |
+ MDIO_AN_CTRL1_ENABLE |
+ MDIO_AN_CTRL1_XNP);
+
+ phy_write(phydev, 30, 93, 2);
+ phy_write(phydev, MDIO_MMD_AN, MDIO_CTRL1, restart_an);
+ }
+
+ return 0;
+}
+
+struct phy_driver tn2020_driver = {
+ .name = "Teranetics TN2020",
+ .uid = 0x00a19410,
+ .mask = 0xfffffff0,
+ .features = PHY_10G_FEATURES,
+ .mmds = (MDIO_DEVS_PMAPMD | MDIO_DEVS_PCS |
+ MDIO_DEVS_PHYXS | MDIO_DEVS_AN |
+ MDIO_DEVS_VEND1 | MDIO_DEVS_VEND2),
+ .config = &tn2020_config,
+ .startup = &gen10g_startup,
+ .shutdown = &gen10g_shutdown,
+};
+
+int phy_teranetics_init(void)
+{
+ phy_register(&tn2020_driver);
+
+ return 0;
+}
diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c
new file mode 100644
index 0000000..d48d4fe
--- /dev/null
+++ b/drivers/net/phy/vitesse.c
@@ -0,0 +1,242 @@
+/*
+ * Vitesse PHY drivers
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ * author Andy Fleming
+ *
+ */
+#include <miiphy.h>
+
+/* Cicada Auxiliary Control/Status Register */
+#define MIIM_CIS82xx_AUX_CONSTAT 0x1c
+#define MIIM_CIS82xx_AUXCONSTAT_INIT 0x0004
+#define MIIM_CIS82xx_AUXCONSTAT_DUPLEX 0x0020
+#define MIIM_CIS82xx_AUXCONSTAT_SPEED 0x0018
+#define MIIM_CIS82xx_AUXCONSTAT_GBIT 0x0010
+#define MIIM_CIS82xx_AUXCONSTAT_100 0x0008
+
+/* Cicada Extended Control Register 1 */
+#define MIIM_CIS82xx_EXT_CON1 0x17
+#define MIIM_CIS8201_EXTCON1_INIT 0x0000
+
+/* Cicada 8204 Extended PHY Control Register 1 */
+#define MIIM_CIS8204_EPHY_CON 0x17
+#define MIIM_CIS8204_EPHYCON_INIT 0x0006
+#define MIIM_CIS8204_EPHYCON_RGMII 0x1100
+
+/* Cicada 8204 Serial LED Control Register */
+#define MIIM_CIS8204_SLED_CON 0x1b
+#define MIIM_CIS8204_SLEDCON_INIT 0x1115
+
+/* Vitesse VSC8601 Extended PHY Control Register 1 */
+#define MIIM_VSC8601_EPHY_CON 0x17
+#define MIIM_VSC8601_EPHY_CON_INIT_SKEW 0x1120
+#define MIIM_VSC8601_SKEW_CTRL 0x1c
+
+#define PHY_EXT_PAGE_ACCESS 0x1f
+
+/* CIS8201 */
+static int vitesse_config(struct phy_device *phydev)
+{
+ /* Override PHY config settings */
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS82xx_AUX_CONSTAT,
+ MIIM_CIS82xx_AUXCONSTAT_INIT);
+ /* Set up the interface mode */
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS82xx_EXT_CON1,
+ MIIM_CIS8201_EXTCON1_INIT);
+
+ genphy_config_aneg(phydev);
+
+ return 0;
+}
+
+static int vitesse_parse_status(struct phy_device *phydev)
+{
+ int speed;
+ int mii_reg;
+
+ mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_CIS82xx_AUX_CONSTAT);
+
+ if (mii_reg & MIIM_CIS82xx_AUXCONSTAT_DUPLEX)
+ phydev->duplex = DUPLEX_FULL;
+ else
+ phydev->duplex = DUPLEX_HALF;
+
+ speed = mii_reg & MIIM_CIS82xx_AUXCONSTAT_SPEED;
+ switch (speed) {
+ case MIIM_CIS82xx_AUXCONSTAT_GBIT:
+ phydev->speed = SPEED_1000;
+ break;
+ case MIIM_CIS82xx_AUXCONSTAT_100:
+ phydev->speed = SPEED_100;
+ break;
+ default:
+ phydev->speed = SPEED_10;
+ break;
+ }
+
+ return 0;
+}
+
+static int vitesse_startup(struct phy_device *phydev)
+{
+ genphy_update_link(phydev);
+ vitesse_parse_status(phydev);
+
+ return 0;
+}
+
+static int cis8204_config(struct phy_device *phydev)
+{
+ /* Override PHY config settings */
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS82xx_AUX_CONSTAT,
+ MIIM_CIS82xx_AUXCONSTAT_INIT);
+
+ genphy_config_aneg(phydev);
+
+ if ((phydev->interface == PHY_INTERFACE_MODE_RGMII) ||
+ (phydev->interface == PHY_INTERFACE_MODE_RGMII) ||
+ (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) ||
+ (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID))
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS8204_EPHY_CON,
+ MIIM_CIS8204_EPHYCON_INIT |
+ MIIM_CIS8204_EPHYCON_RGMII);
+ else
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_CIS8204_EPHY_CON,
+ MIIM_CIS8204_EPHYCON_INIT);
+
+ return 0;
+}
+
+/* Vitesse VSC8601 */
+int vsc8601_config(struct phy_device *phydev)
+{
+ /* Configure some basic stuff */
+#ifdef CONFIG_SYS_VSC8601_SKEWFIX
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8601_EPHY_CON,
+ MIIM_VSC8601_EPHY_CON_INIT_SKEW);
+#if defined(CONFIG_SYS_VSC8601_SKEW_TX) && defined(CONFIG_SYS_VSC8601_SKEW_RX)
+ phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 1);
+#define VSC8101_SKEW \
+ ((CONFIG_SYS_VSC8601_SKEW_TX << 14) \
+ | (CONFIG_SYS_VSC8601_SKEW_RX << 12))
+ phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8601_SKEW_CTRL,
+ VSC8101_SKEW);
+ phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 0);
+#endif
+#endif
+
+ genphy_config_aneg(phydev);
+
+ return 0;
+}
+
+static struct phy_driver VSC8211_driver = {
+ .name = "Vitesse VSC8211",
+ .uid = 0xfc4b0,
+ .mask = 0xffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &vitesse_config,
+ .startup = &vitesse_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+static struct phy_driver VSC8221_driver = {
+ .name = "Vitesse VSC8221",
+ .uid = 0xfc550,
+ .mask = 0xffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &genphy_config_aneg,
+ .startup = &vitesse_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+static struct phy_driver VSC8244_driver = {
+ .name = "Vitesse VSC8244",
+ .uid = 0xfc6c0,
+ .mask = 0xffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &genphy_config_aneg,
+ .startup = &vitesse_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+static struct phy_driver VSC8234_driver = {
+ .name = "Vitesse VSC8234",
+ .uid = 0xfc620,
+ .mask = 0xffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &genphy_config_aneg,
+ .startup = &vitesse_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+static struct phy_driver VSC8601_driver = {
+ .name = "Vitesse VSC8601",
+ .uid = 0x70420,
+ .mask = 0xffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &vsc8601_config,
+ .startup = &vitesse_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+static struct phy_driver VSC8641_driver = {
+ .name = "Vitesse VSC8641",
+ .uid = 0x70430,
+ .mask = 0xffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &genphy_config_aneg,
+ .startup = &vitesse_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+/* Vitesse bought Cicada, so we'll put these here */
+static struct phy_driver cis8201_driver = {
+ .name = "CIS8201",
+ .uid = 0xfc410,
+ .mask = 0xffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &vitesse_config,
+ .startup = &vitesse_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+static struct phy_driver cis8204_driver = {
+ .name = "Cicada Cis8204",
+ .uid = 0xfc440,
+ .mask = 0xffff0,
+ .features = PHY_GBIT_FEATURES,
+ .config = &cis8204_config,
+ .startup = &vitesse_startup,
+ .shutdown = &genphy_shutdown,
+};
+
+int phy_vitesse_init(void)
+{
+ phy_register(&VSC8641_driver);
+ phy_register(&VSC8601_driver);
+ phy_register(&VSC8234_driver);
+ phy_register(&VSC8244_driver);
+ phy_register(&VSC8211_driver);
+ phy_register(&VSC8221_driver);
+ phy_register(&cis8201_driver);
+ phy_register(&cis8204_driver);
+
+ return 0;
+}
diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c
index 9a91b9e..06e5834 100644
--- a/drivers/net/tsec.c
+++ b/drivers/net/tsec.c
@@ -5,7 +5,7 @@
* terms of the GNU Public License, Version 2, incorporated
* herein by reference.
*
- * Copyright 2004-2010 Freescale Semiconductor, Inc.
+ * Copyright 2004-2011 Freescale Semiconductor, Inc.
* (C) Copyright 2003, Motorola, Inc.
* author Andy Fleming
*
@@ -17,10 +17,9 @@
#include <net.h>
#include <command.h>
#include <tsec.h>
+#include <fsl_mdio.h>
#include <asm/errno.h>
-#include "miiphy.h"
-
DECLARE_GLOBAL_DATA_PTR;
#define TX_BUF_CNT 2
@@ -44,31 +43,6 @@ static RTXBD rtx __attribute__ ((aligned(8)));
#error "rtx must be 64-bit aligned"
#endif
-static int tsec_send(struct eth_device *dev,
- volatile void *packet, int length);
-static int tsec_recv(struct eth_device *dev);
-static int tsec_init(struct eth_device *dev, bd_t * bd);
-static int tsec_initialize(bd_t * bis, struct tsec_info_struct *tsec_info);
-static void tsec_halt(struct eth_device *dev);
-static void init_registers(volatile tsec_t * regs);
-static void startup_tsec(struct eth_device *dev);
-static int init_phy(struct eth_device *dev);
-void write_phy_reg(struct tsec_private *priv, uint regnum, uint value);
-uint read_phy_reg(struct tsec_private *priv, uint regnum);
-static struct phy_info *get_phy_info(struct eth_device *dev);
-static void phy_run_commands(struct tsec_private *priv, struct phy_cmd *cmd);
-static void adjust_link(struct eth_device *dev);
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) \
- && !defined(BITBANGMII)
-static int tsec_miiphy_write(const char *devname, unsigned char addr,
- unsigned char reg, unsigned short value);
-static int tsec_miiphy_read(const char *devname, unsigned char addr,
- unsigned char reg, unsigned short *value);
-#endif
-#ifdef CONFIG_MCAST_TFTP
-static int tsec_mcast_addr (struct eth_device *dev, u8 mcast_mac, u8 set);
-#endif
-
/* Default initializations for TSEC controllers. */
static struct tsec_info_struct tsec_info[] = {
@@ -81,10 +55,10 @@ static struct tsec_info_struct tsec_info[] = {
#ifdef CONFIG_MPC85XX_FEC
{
.regs = (tsec_t *)(TSEC_BASE_ADDR + 0x2000),
- .miiregs = (tsec_mdio_t *)(MDIO_BASE_ADDR),
.devname = CONFIG_MPC85XX_FEC_NAME,
.phyaddr = FEC_PHY_ADDR,
- .flags = FEC_FLAGS
+ .flags = FEC_FLAGS,
+ .mii_devname = DEFAULT_MII_NAME
}, /* FEC */
#endif
#ifdef CONFIG_TSEC3
@@ -95,195 +69,6 @@ static struct tsec_info_struct tsec_info[] = {
#endif
};
-/*
- * Initialize all the TSEC devices
- *
- * Returns the number of TSEC devices that were initialized
- */
-int tsec_eth_init(bd_t *bis, struct tsec_info_struct *tsecs, int num)
-{
- int i;
- int ret, count = 0;
-
- for (i = 0; i < num; i++) {
- ret = tsec_initialize(bis, &tsecs[i]);
- if (ret > 0)
- count += ret;
- }
-
- return count;
-}
-
-int tsec_standard_init(bd_t *bis)
-{
- return tsec_eth_init(bis, tsec_info, ARRAY_SIZE(tsec_info));
-}
-
-/* Initialize device structure. Returns success if PHY
- * initialization succeeded (i.e. if it recognizes the PHY)
- */
-static int tsec_initialize(bd_t * bis, struct tsec_info_struct *tsec_info)
-{
- struct eth_device *dev;
- int i;
- struct tsec_private *priv;
-
- dev = (struct eth_device *)malloc(sizeof *dev);
-
- if (NULL == dev)
- return 0;
-
- memset(dev, 0, sizeof *dev);
-
- priv = (struct tsec_private *)malloc(sizeof(*priv));
-
- if (NULL == priv)
- return 0;
-
- privlist[num_tsecs++] = priv;
- priv->regs = tsec_info->regs;
- priv->phyregs = tsec_info->miiregs;
- priv->phyregs_sgmii = tsec_info->miiregs_sgmii;
-
- priv->phyaddr = tsec_info->phyaddr;
- priv->flags = tsec_info->flags;
-
- sprintf(dev->name, tsec_info->devname);
- dev->iobase = 0;
- dev->priv = priv;
- dev->init = tsec_init;
- dev->halt = tsec_halt;
- dev->send = tsec_send;
- dev->recv = tsec_recv;
-#ifdef CONFIG_MCAST_TFTP
- dev->mcast = tsec_mcast_addr;
-#endif
-
- /* Tell u-boot to get the addr from the env */
- for (i = 0; i < 6; i++)
- dev->enetaddr[i] = 0;
-
- eth_register(dev);
-
- /* Reset the MAC */
- priv->regs->maccfg1 |= MACCFG1_SOFT_RESET;
- udelay(2); /* Soft Reset must be asserted for 3 TX clocks */
- priv->regs->maccfg1 &= ~(MACCFG1_SOFT_RESET);
-
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) \
- && !defined(BITBANGMII)
- miiphy_register(dev->name, tsec_miiphy_read, tsec_miiphy_write);
-#endif
-
- /* Try to initialize PHY here, and return */
- return init_phy(dev);
-}
-
-/* Initializes data structures and registers for the controller,
- * and brings the interface up. Returns the link status, meaning
- * that it returns success if the link is up, failure otherwise.
- * This allows u-boot to find the first active controller.
- */
-static int tsec_init(struct eth_device *dev, bd_t * bd)
-{
- uint tempval;
- char tmpbuf[MAC_ADDR_LEN];
- int i;
- struct tsec_private *priv = (struct tsec_private *)dev->priv;
- volatile tsec_t *regs = priv->regs;
-
- /* Make sure the controller is stopped */
- tsec_halt(dev);
-
- /* Init MACCFG2. Defaults to GMII */
- regs->maccfg2 = MACCFG2_INIT_SETTINGS;
-
- /* Init ECNTRL */
- regs->ecntrl = ECNTRL_INIT_SETTINGS;
-
- /* Copy the station address into the address registers.
- * Backwards, because little endian MACS are dumb */
- for (i = 0; i < MAC_ADDR_LEN; i++) {
- tmpbuf[MAC_ADDR_LEN - 1 - i] = dev->enetaddr[i];
- }
- tempval = (tmpbuf[0] << 24) | (tmpbuf[1] << 16) | (tmpbuf[2] << 8) |
- tmpbuf[3];
-
- regs->macstnaddr1 = tempval;
-
- tempval = *((uint *) (tmpbuf + 4));
-
- regs->macstnaddr2 = tempval;
-
- /* reset the indices to zero */
- rxIdx = 0;
- txIdx = 0;
-
- /* Clear out (for the most part) the other registers */
- init_registers(regs);
-
- /* Ready the device for tx/rx */
- startup_tsec(dev);
-
- /* If there's no link, fail */
- return (priv->link ? 0 : -1);
-}
-
-/* Writes the given phy's reg with value, using the specified MDIO regs */
-static void tsec_local_mdio_write(volatile tsec_mdio_t *phyregs, uint addr,
- uint reg, uint value)
-{
- int timeout = 1000000;
-
- phyregs->miimadd = (addr << 8) | reg;
- phyregs->miimcon = value;
- asm("sync");
-
- timeout = 1000000;
- while ((phyregs->miimind & MIIMIND_BUSY) && timeout--) ;
-}
-
-
-/* Provide the default behavior of writing the PHY of this ethernet device */
-#define write_phy_reg(priv, regnum, value) \
- tsec_local_mdio_write(priv->phyregs,priv->phyaddr,regnum,value)
-
-/* Reads register regnum on the device's PHY through the
- * specified registers. It lowers and raises the read
- * command, and waits for the data to become valid (miimind
- * notvalid bit cleared), and the bus to cease activity (miimind
- * busy bit cleared), and then returns the value
- */
-static uint tsec_local_mdio_read(volatile tsec_mdio_t *phyregs,
- uint phyid, uint regnum)
-{
- uint value;
-
- /* Put the address of the phy, and the register
- * number into MIIMADD */
- phyregs->miimadd = (phyid << 8) | regnum;
-
- /* Clear the command register, and wait */
- phyregs->miimcom = 0;
- asm("sync");
-
- /* Initiate a read command, and wait */
- phyregs->miimcom = MIIM_READ_COMMAND;
- asm("sync");
-
- /* Wait for the the indication that the read is done */
- while ((phyregs->miimind & (MIIMIND_NOTVALID | MIIMIND_BUSY))) ;
-
- /* Grab the value read from the PHY */
- value = phyregs->miimstat;
-
- return value;
-}
-
-/* #define to provide old read_phy_reg functionality without duplicating code */
-#define read_phy_reg(priv,regnum) \
- tsec_local_mdio_read(priv->phyregs,priv->phyaddr,regnum)
-
#define TBIANA_SETTINGS ( \
TBIANA_ASYMMETRIC_PAUSE \
| TBIANA_SYMMETRIC_PAUSE \
@@ -305,661 +90,150 @@ static void tsec_configure_serdes(struct tsec_private *priv)
{
/* Access TBI PHY registers at given TSEC register offset as opposed
* to the register offset used for external PHY accesses */
- tsec_local_mdio_write(priv->phyregs_sgmii, priv->regs->tbipa, TBI_ANA,
- TBIANA_SETTINGS);
- tsec_local_mdio_write(priv->phyregs_sgmii, priv->regs->tbipa, TBI_TBICON,
- TBICON_CLK_SELECT);
- tsec_local_mdio_write(priv->phyregs_sgmii, priv->regs->tbipa, TBI_CR,
- CONFIG_TSEC_TBICR_SETTINGS);
-}
-
-/* Discover which PHY is attached to the device, and configure it
- * properly. If the PHY is not recognized, then return 0
- * (failure). Otherwise, return 1
- */
-static int init_phy(struct eth_device *dev)
-{
- struct tsec_private *priv = (struct tsec_private *)dev->priv;
- struct phy_info *curphy;
- volatile tsec_t *regs = priv->regs;
-
- /* Assign a Physical address to the TBI */
- regs->tbipa = CONFIG_SYS_TBIPA_VALUE;
- asm("sync");
-
- /* Reset MII (due to new addresses) */
- priv->phyregs->miimcfg = MIIMCFG_RESET;
- asm("sync");
- priv->phyregs->miimcfg = MIIMCFG_INIT_VALUE;
- asm("sync");
- while (priv->phyregs->miimind & MIIMIND_BUSY) ;
-
- /* Get the cmd structure corresponding to the attached
- * PHY */
- curphy = get_phy_info(dev);
-
- if (curphy == NULL) {
- priv->phyinfo = NULL;
- printf("%s: No PHY found\n", dev->name);
-
- return 0;
- }
-
- if (regs->ecntrl & ECNTRL_SGMII_MODE)
- tsec_configure_serdes(priv);
-
- priv->phyinfo = curphy;
-
- phy_run_commands(priv, priv->phyinfo->config);
-
- return 1;
-}
-
-/*
- * Returns which value to write to the control register.
- * For 10/100, the value is slightly different
- */
-static uint mii_cr_init(uint mii_reg, struct tsec_private * priv)
-{
- if (priv->flags & TSEC_GIGABIT)
- return MIIM_CONTROL_INIT;
- else
- return MIIM_CR_INIT;
+ tsec_local_mdio_write(priv->phyregs_sgmii, in_be32(&priv->regs->tbipa),
+ 0, TBI_ANA, TBIANA_SETTINGS);
+ tsec_local_mdio_write(priv->phyregs_sgmii, in_be32(&priv->regs->tbipa),
+ 0, TBI_TBICON, TBICON_CLK_SELECT);
+ tsec_local_mdio_write(priv->phyregs_sgmii, in_be32(&priv->regs->tbipa),
+ 0, TBI_CR, CONFIG_TSEC_TBICR_SETTINGS);
}
-/*
- * Wait for auto-negotiation to complete, then determine link
- */
-static uint mii_parse_sr(uint mii_reg, struct tsec_private * priv)
-{
- /*
- * Wait if the link is up, and autonegotiation is in progress
- * (ie - we're capable and it's not done)
- */
- mii_reg = read_phy_reg(priv, MIIM_STATUS);
- if ((mii_reg & BMSR_ANEGCAPABLE) && !(mii_reg & BMSR_ANEGCOMPLETE)) {
- int i = 0;
-
- puts("Waiting for PHY auto negotiation to complete");
- while (!(mii_reg & BMSR_ANEGCOMPLETE)) {
- /*
- * Timeout reached ?
- */
- if (i > PHY_AUTONEGOTIATE_TIMEOUT) {
- puts(" TIMEOUT !\n");
- priv->link = 0;
- return 0;
- }
-
- if (ctrlc()) {
- puts("user interrupt!\n");
- priv->link = 0;
- return -EINTR;
- }
-
- if ((i++ % 1000) == 0) {
- putc('.');
- }
- udelay(1000); /* 1 ms */
- mii_reg = read_phy_reg(priv, MIIM_STATUS);
- }
- puts(" done\n");
-
- /* Link status bit is latched low, read it again */
- mii_reg = read_phy_reg(priv, MIIM_STATUS);
-
- udelay(500000); /* another 500 ms (results in faster booting) */
- }
+#ifdef CONFIG_MCAST_TFTP
- priv->link = mii_reg & MIIM_STATUS_LINK ? 1 : 0;
+/* CREDITS: linux gianfar driver, slightly adjusted... thanx. */
- return 0;
-}
+/* Set the appropriate hash bit for the given addr */
-/* Generic function which updates the speed and duplex. If
- * autonegotiation is enabled, it uses the AND of the link
- * partner's advertised capabilities and our advertised
- * capabilities. If autonegotiation is disabled, we use the
- * appropriate bits in the control register.
- *
- * Stolen from Linux's mii.c and phy_device.c
- */
-static uint mii_parse_link(uint mii_reg, struct tsec_private *priv)
+/* The algorithm works like so:
+ * 1) Take the Destination Address (ie the multicast address), and
+ * do a CRC on it (little endian), and reverse the bits of the
+ * result.
+ * 2) Use the 8 most significant bits as a hash into a 256-entry
+ * table. The table is controlled through 8 32-bit registers:
+ * gaddr0-7. gaddr0's MSB is entry 0, and gaddr7's LSB is
+ * gaddr7. This means that the 3 most significant bits in the
+ * hash index which gaddr register to use, and the 5 other bits
+ * indicate which bit (assuming an IBM numbering scheme, which
+ * for PowerPC (tm) is usually the case) in the tregister holds
+ * the entry. */
+static int
+tsec_mcast_addr (struct eth_device *dev, u8 mcast_mac, u8 set)
{
- /* We're using autonegotiation */
- if (mii_reg & BMSR_ANEGCAPABLE) {
- uint lpa = 0;
- uint gblpa = 0;
-
- /* Check for gigabit capability */
- if (mii_reg & BMSR_ERCAP) {
- /* We want a list of states supported by
- * both PHYs in the link
- */
- gblpa = read_phy_reg(priv, MII_STAT1000);
- gblpa &= read_phy_reg(priv, MII_CTRL1000) << 2;
- }
-
- /* Set the baseline so we only have to set them
- * if they're different
- */
- priv->speed = 10;
- priv->duplexity = 0;
-
- /* Check the gigabit fields */
- if (gblpa & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)) {
- priv->speed = 1000;
-
- if (gblpa & PHY_1000BTSR_1000FD)
- priv->duplexity = 1;
-
- /* We're done! */
- return 0;
- }
-
- lpa = read_phy_reg(priv, MII_ADVERTISE);
- lpa &= read_phy_reg(priv, MII_LPA);
+ struct tsec_private *priv = privlist[1];
+ volatile tsec_t *regs = priv->regs;
+ volatile u32 *reg_array, value;
+ u8 result, whichbit, whichreg;
- if (lpa & (LPA_100FULL | LPA_100HALF)) {
- priv->speed = 100;
+ result = (u8)((ether_crc(MAC_ADDR_LEN,mcast_mac) >> 24) & 0xff);
+ whichbit = result & 0x1f; /* the 5 LSB = which bit to set */
+ whichreg = result >> 5; /* the 3 MSB = which reg to set it in */
+ value = (1 << (31-whichbit));
- if (lpa & LPA_100FULL)
- priv->duplexity = 1;
+ reg_array = &(regs->hash.gaddr0);
- } else if (lpa & LPA_10FULL)
- priv->duplexity = 1;
+ if (set) {
+ reg_array[whichreg] |= value;
} else {
- uint bmcr = read_phy_reg(priv, MII_BMCR);
-
- priv->speed = 10;
- priv->duplexity = 0;
-
- if (bmcr & BMCR_FULLDPLX)
- priv->duplexity = 1;
-
- if (bmcr & BMCR_SPEED1000)
- priv->speed = 1000;
- else if (bmcr & BMCR_SPEED100)
- priv->speed = 100;
- }
-
- return 0;
-}
-
-/*
- * "Ethernet@Wirespeed" needs to be enabled to achieve link in certain
- * circumstances. eg a gigabit TSEC connected to a gigabit switch with
- * a 4-wire ethernet cable. Both ends advertise gigabit, but can't
- * link. "Ethernet@Wirespeed" reduces advertised speed until link
- * can be achieved.
- */
-static uint mii_BCM54xx_wirespeed(uint mii_reg, struct tsec_private *priv)
-{
- return (read_phy_reg(priv, mii_reg) & 0x8FFF) | 0x8010;
-}
-
-/*
- * Parse the BCM54xx status register for speed and duplex information.
- * The linux sungem_phy has this information, but in a table format.
- */
-static uint mii_parse_BCM54xx_sr(uint mii_reg, struct tsec_private *priv)
-{
- /* If there is no link, speed and duplex don't matter */
- if (!priv->link)
- return 0;
-
- switch ((mii_reg & MIIM_BCM54xx_AUXSTATUS_LINKMODE_MASK) >>
- MIIM_BCM54xx_AUXSTATUS_LINKMODE_SHIFT) {
- case 1:
- priv->duplexity = 0;
- priv->speed = 10;
- break;
- case 2:
- priv->duplexity = 1;
- priv->speed = 10;
- break;
- case 3:
- priv->duplexity = 0;
- priv->speed = 100;
- break;
- case 5:
- priv->duplexity = 1;
- priv->speed = 100;
- break;
- case 6:
- priv->duplexity = 0;
- priv->speed = 1000;
- break;
- case 7:
- priv->duplexity = 1;
- priv->speed = 1000;
- break;
- default:
- printf("Auto-neg error, defaulting to 10BT/HD\n");
- priv->duplexity = 0;
- priv->speed = 10;
- break;
+ reg_array[whichreg] &= ~value;
}
-
return 0;
}
+#endif /* Multicast TFTP ? */
-/*
- * Find out if PHY is in copper or serdes mode by looking at Expansion Reg
- * 0x42 - "Operating Mode Status Register"
- */
-static int BCM8482_is_serdes(struct tsec_private *priv)
-{
- u16 val;
- int serdes = 0;
-
- write_phy_reg(priv, MIIM_BCM54XX_EXP_SEL, MIIM_BCM54XX_EXP_SEL_ER | 0x42);
- val = read_phy_reg(priv, MIIM_BCM54XX_EXP_DATA);
-
- switch (val & 0x1f) {
- case 0x0d: /* RGMII-to-100Base-FX */
- case 0x0e: /* RGMII-to-SGMII */
- case 0x0f: /* RGMII-to-SerDes */
- case 0x12: /* SGMII-to-SerDes */
- case 0x13: /* SGMII-to-100Base-FX */
- case 0x16: /* SerDes-to-Serdes */
- serdes = 1;
- break;
- case 0x6: /* RGMII-to-Copper */
- case 0x14: /* SGMII-to-Copper */
- case 0x17: /* SerDes-to-Copper */
- break;
- default:
- printf("ERROR, invalid PHY mode (0x%x\n)", val);
- break;
- }
-
- return serdes;
-}
-
-/*
- * Determine SerDes link speed and duplex from Expansion reg 0x42 "Operating
- * Mode Status Register"
+/* Initialized required registers to appropriate values, zeroing
+ * those we don't care about (unless zero is bad, in which case,
+ * choose a more appropriate value)
*/
-uint mii_parse_BCM5482_serdes_sr(struct tsec_private *priv)
+static void init_registers(tsec_t *regs)
{
- u16 val;
- int i = 0;
+ /* Clear IEVENT */
+ out_be32(&regs->ievent, IEVENT_INIT_CLEAR);
+
+ out_be32(&regs->imask, IMASK_INIT_CLEAR);
+
+ out_be32(&regs->hash.iaddr0, 0);
+ out_be32(&regs->hash.iaddr1, 0);
+ out_be32(&regs->hash.iaddr2, 0);
+ out_be32(&regs->hash.iaddr3, 0);
+ out_be32(&regs->hash.iaddr4, 0);
+ out_be32(&regs->hash.iaddr5, 0);
+ out_be32(&regs->hash.iaddr6, 0);
+ out_be32(&regs->hash.iaddr7, 0);
+
+ out_be32(&regs->hash.gaddr0, 0);
+ out_be32(&regs->hash.gaddr1, 0);
+ out_be32(&regs->hash.gaddr2, 0);
+ out_be32(&regs->hash.gaddr3, 0);
+ out_be32(&regs->hash.gaddr4, 0);
+ out_be32(&regs->hash.gaddr5, 0);
+ out_be32(&regs->hash.gaddr6, 0);
+ out_be32(&regs->hash.gaddr7, 0);
+
+ out_be32(&regs->rctrl, 0x00000000);
- /* Wait 1s for link - Clause 37 autonegotiation happens very fast */
- while (1) {
- write_phy_reg(priv, MIIM_BCM54XX_EXP_SEL,
- MIIM_BCM54XX_EXP_SEL_ER | 0x42);
- val = read_phy_reg(priv, MIIM_BCM54XX_EXP_DATA);
+ /* Init RMON mib registers */
+ memset((void *)&(regs->rmon), 0, sizeof(rmon_mib_t));
- if (val & 0x8000)
- break;
+ out_be32(&regs->rmon.cam1, 0xffffffff);
+ out_be32(&regs->rmon.cam2, 0xffffffff);
- if (i++ > 1000) {
- priv->link = 0;
- return 1;
- }
+ out_be32(&regs->mrblr, MRBLR_INIT_SETTINGS);
- udelay(1000); /* 1 ms */
- }
+ out_be32(&regs->minflr, MINFLR_INIT_SETTINGS);
- priv->link = 1;
- switch ((val >> 13) & 0x3) {
- case (0x00):
- priv->speed = 10;
- break;
- case (0x01):
- priv->speed = 100;
- break;
- case (0x02):
- priv->speed = 1000;
- break;
- }
-
- priv->duplexity = (val & 0x1000) == 0x1000;
+ out_be32(&regs->attr, ATTR_INIT_SETTINGS);
+ out_be32(&regs->attreli, ATTRELI_INIT_SETTINGS);
- return 0;
}
-/*
- * Figure out if BCM5482 is in serdes or copper mode and determine link
- * configuration accordingly
- */
-static uint mii_parse_BCM5482_sr(uint mii_reg, struct tsec_private *priv)
-{
- if (BCM8482_is_serdes(priv)) {
- mii_parse_BCM5482_serdes_sr(priv);
- priv->flags |= TSEC_FIBER;
- } else {
- /* Wait for auto-negotiation to complete or fail */
- mii_parse_sr(mii_reg, priv);
-
- /* Parse BCM54xx copper aux status register */
- mii_reg = read_phy_reg(priv, MIIM_BCM54xx_AUXSTATUS);
- mii_parse_BCM54xx_sr(mii_reg, priv);
- }
-
- return 0;
-}
-
-/* Parse the 88E1011's status register for speed and duplex
- * information
- */
-static uint mii_parse_88E1011_psr(uint mii_reg, struct tsec_private * priv)
-{
- uint speed;
-
- mii_reg = read_phy_reg(priv, MIIM_88E1011_PHY_STATUS);
-
- if ((mii_reg & MIIM_88E1011_PHYSTAT_LINK) &&
- !(mii_reg & MIIM_88E1011_PHYSTAT_SPDDONE)) {
- int i = 0;
-
- puts("Waiting for PHY realtime link");
- while (!(mii_reg & MIIM_88E1011_PHYSTAT_SPDDONE)) {
- /* Timeout reached ? */
- if (i > PHY_AUTONEGOTIATE_TIMEOUT) {
- puts(" TIMEOUT !\n");
- priv->link = 0;
- break;
- }
-
- if ((i++ % 1000) == 0) {
- putc('.');
- }
- udelay(1000); /* 1 ms */
- mii_reg = read_phy_reg(priv, MIIM_88E1011_PHY_STATUS);
- }
- puts(" done\n");
- udelay(500000); /* another 500 ms (results in faster booting) */
- } else {
- if (mii_reg & MIIM_88E1011_PHYSTAT_LINK)
- priv->link = 1;
- else
- priv->link = 0;
- }
-
- if (mii_reg & MIIM_88E1011_PHYSTAT_DUPLEX)
- priv->duplexity = 1;
- else
- priv->duplexity = 0;
-
- speed = (mii_reg & MIIM_88E1011_PHYSTAT_SPEED);
-
- switch (speed) {
- case MIIM_88E1011_PHYSTAT_GBIT:
- priv->speed = 1000;
- break;
- case MIIM_88E1011_PHYSTAT_100:
- priv->speed = 100;
- break;
- default:
- priv->speed = 10;
- }
-
- return 0;
-}
-
-/* Parse the RTL8211B's status register for speed and duplex
- * information
+/* Configure maccfg2 based on negotiated speed and duplex
+ * reported by PHY handling code
*/
-static uint mii_parse_RTL8211B_sr(uint mii_reg, struct tsec_private * priv)
+static void adjust_link(struct tsec_private *priv, struct phy_device *phydev)
{
- uint speed;
-
- mii_reg = read_phy_reg(priv, MIIM_RTL8211B_PHY_STATUS);
- if (!(mii_reg & MIIM_RTL8211B_PHYSTAT_SPDDONE)) {
- int i = 0;
-
- /* in case of timeout ->link is cleared */
- priv->link = 1;
- puts("Waiting for PHY realtime link");
- while (!(mii_reg & MIIM_RTL8211B_PHYSTAT_SPDDONE)) {
- /* Timeout reached ? */
- if (i > PHY_AUTONEGOTIATE_TIMEOUT) {
- puts(" TIMEOUT !\n");
- priv->link = 0;
- break;
- }
-
- if ((i++ % 1000) == 0) {
- putc('.');
- }
- udelay(1000); /* 1 ms */
- mii_reg = read_phy_reg(priv, MIIM_RTL8211B_PHY_STATUS);
- }
- puts(" done\n");
- udelay(500000); /* another 500 ms (results in faster booting) */
- } else {
- if (mii_reg & MIIM_RTL8211B_PHYSTAT_LINK)
- priv->link = 1;
- else
- priv->link = 0;
- }
+ tsec_t *regs = priv->regs;
+ u32 ecntrl, maccfg2;
- if (mii_reg & MIIM_RTL8211B_PHYSTAT_DUPLEX)
- priv->duplexity = 1;
- else
- priv->duplexity = 0;
-
- speed = (mii_reg & MIIM_RTL8211B_PHYSTAT_SPEED);
-
- switch (speed) {
- case MIIM_RTL8211B_PHYSTAT_GBIT:
- priv->speed = 1000;
- break;
- case MIIM_RTL8211B_PHYSTAT_100:
- priv->speed = 100;
- break;
- default:
- priv->speed = 10;
+ if (!phydev->link) {
+ printf("%s: No link.\n", phydev->dev->name);
+ return;
}
- return 0;
-}
+ /* clear all bits relative with interface mode */
+ ecntrl = in_be32(&regs->ecntrl);
+ ecntrl &= ~ECNTRL_R100;
-/* Parse the cis8201's status register for speed and duplex
- * information
- */
-static uint mii_parse_cis8201(uint mii_reg, struct tsec_private * priv)
-{
- uint speed;
+ maccfg2 = in_be32(&regs->maccfg2);
+ maccfg2 &= ~(MACCFG2_IF | MACCFG2_FULL_DUPLEX);
- if (mii_reg & MIIM_CIS8201_AUXCONSTAT_DUPLEX)
- priv->duplexity = 1;
- else
- priv->duplexity = 0;
+ if (phydev->duplex)
+ maccfg2 |= MACCFG2_FULL_DUPLEX;
- speed = mii_reg & MIIM_CIS8201_AUXCONSTAT_SPEED;
- switch (speed) {
- case MIIM_CIS8201_AUXCONSTAT_GBIT:
- priv->speed = 1000;
+ switch (phydev->speed) {
+ case 1000:
+ maccfg2 |= MACCFG2_GMII;
break;
- case MIIM_CIS8201_AUXCONSTAT_100:
- priv->speed = 100;
- break;
- default:
- priv->speed = 10;
- break;
- }
-
- return 0;
-}
-
-/* Parse the vsc8244's status register for speed and duplex
- * information
- */
-static uint mii_parse_vsc8244(uint mii_reg, struct tsec_private * priv)
-{
- uint speed;
+ case 100:
+ case 10:
+ maccfg2 |= MACCFG2_MII;
- if (mii_reg & MIIM_VSC8244_AUXCONSTAT_DUPLEX)
- priv->duplexity = 1;
- else
- priv->duplexity = 0;
-
- speed = mii_reg & MIIM_VSC8244_AUXCONSTAT_SPEED;
- switch (speed) {
- case MIIM_VSC8244_AUXCONSTAT_GBIT:
- priv->speed = 1000;
- break;
- case MIIM_VSC8244_AUXCONSTAT_100:
- priv->speed = 100;
+ /* Set R100 bit in all modes although
+ * it is only used in RGMII mode
+ */
+ if (phydev->speed == 100)
+ ecntrl |= ECNTRL_R100;
break;
default:
- priv->speed = 10;
+ printf("%s: Speed was bad\n", phydev->dev->name);
break;
}
- return 0;
-}
-
-/* Parse the DM9161's status register for speed and duplex
- * information
- */
-static uint mii_parse_dm9161_scsr(uint mii_reg, struct tsec_private * priv)
-{
- if (mii_reg & (MIIM_DM9161_SCSR_100F | MIIM_DM9161_SCSR_100H))
- priv->speed = 100;
- else
- priv->speed = 10;
-
- if (mii_reg & (MIIM_DM9161_SCSR_100F | MIIM_DM9161_SCSR_10F))
- priv->duplexity = 1;
- else
- priv->duplexity = 0;
-
- return 0;
-}
-
-/*
- * Hack to write all 4 PHYs with the LED values
- */
-static uint mii_cis8204_fixled(uint mii_reg, struct tsec_private * priv)
-{
- uint phyid;
- volatile tsec_mdio_t *regbase = priv->phyregs;
- int timeout = 1000000;
-
- for (phyid = 0; phyid < 4; phyid++) {
- regbase->miimadd = (phyid << 8) | mii_reg;
- regbase->miimcon = MIIM_CIS8204_SLEDCON_INIT;
- asm("sync");
-
- timeout = 1000000;
- while ((regbase->miimind & MIIMIND_BUSY) && timeout--) ;
- }
-
- return MIIM_CIS8204_SLEDCON_INIT;
-}
-
-static uint mii_cis8204_setmode(uint mii_reg, struct tsec_private * priv)
-{
- if (priv->flags & TSEC_REDUCED)
- return MIIM_CIS8204_EPHYCON_INIT | MIIM_CIS8204_EPHYCON_RGMII;
- else
- return MIIM_CIS8204_EPHYCON_INIT;
-}
-
-static uint mii_m88e1111s_setmode(uint mii_reg, struct tsec_private *priv)
-{
- uint mii_data = read_phy_reg(priv, mii_reg);
-
- if (priv->flags & TSEC_REDUCED)
- mii_data = (mii_data & 0xfff0) | 0x000b;
- return mii_data;
-}
-
-/* Initialized required registers to appropriate values, zeroing
- * those we don't care about (unless zero is bad, in which case,
- * choose a more appropriate value)
- */
-static void init_registers(volatile tsec_t * regs)
-{
- /* Clear IEVENT */
- regs->ievent = IEVENT_INIT_CLEAR;
-
- regs->imask = IMASK_INIT_CLEAR;
-
- regs->hash.iaddr0 = 0;
- regs->hash.iaddr1 = 0;
- regs->hash.iaddr2 = 0;
- regs->hash.iaddr3 = 0;
- regs->hash.iaddr4 = 0;
- regs->hash.iaddr5 = 0;
- regs->hash.iaddr6 = 0;
- regs->hash.iaddr7 = 0;
-
- regs->hash.gaddr0 = 0;
- regs->hash.gaddr1 = 0;
- regs->hash.gaddr2 = 0;
- regs->hash.gaddr3 = 0;
- regs->hash.gaddr4 = 0;
- regs->hash.gaddr5 = 0;
- regs->hash.gaddr6 = 0;
- regs->hash.gaddr7 = 0;
-
- regs->rctrl = 0x00000000;
-
- /* Init RMON mib registers */
- memset((void *)&(regs->rmon), 0, sizeof(rmon_mib_t));
-
- regs->rmon.cam1 = 0xffffffff;
- regs->rmon.cam2 = 0xffffffff;
-
- regs->mrblr = MRBLR_INIT_SETTINGS;
-
- regs->minflr = MINFLR_INIT_SETTINGS;
-
- regs->attr = ATTR_INIT_SETTINGS;
- regs->attreli = ATTRELI_INIT_SETTINGS;
+ out_be32(&regs->ecntrl, ecntrl);
+ out_be32(&regs->maccfg2, maccfg2);
-}
-
-/* Configure maccfg2 based on negotiated speed and duplex
- * reported by PHY handling code
- */
-static void adjust_link(struct eth_device *dev)
-{
- struct tsec_private *priv = (struct tsec_private *)dev->priv;
- volatile tsec_t *regs = priv->regs;
-
- if (priv->link) {
- if (priv->duplexity != 0)
- regs->maccfg2 |= MACCFG2_FULL_DUPLEX;
- else
- regs->maccfg2 &= ~(MACCFG2_FULL_DUPLEX);
-
- switch (priv->speed) {
- case 1000:
- regs->maccfg2 = ((regs->maccfg2 & ~(MACCFG2_IF))
- | MACCFG2_GMII);
- break;
- case 100:
- case 10:
- regs->maccfg2 = ((regs->maccfg2 & ~(MACCFG2_IF))
- | MACCFG2_MII);
-
- /* Set R100 bit in all modes although
- * it is only used in RGMII mode
- */
- if (priv->speed == 100)
- regs->ecntrl |= ECNTRL_R100;
- else
- regs->ecntrl &= ~(ECNTRL_R100);
- break;
- default:
- printf("%s: Speed was bad\n", dev->name);
- break;
- }
-
- printf("Speed: %d, %s duplex%s\n", priv->speed,
- (priv->duplexity) ? "full" : "half",
- (priv->flags & TSEC_FIBER) ? ", fiber mode" : "");
-
- } else {
- printf("%s: No link.\n", dev->name);
- }
+ printf("Speed: %d, %s duplex%s\n", phydev->speed,
+ (phydev->duplex) ? "full" : "half",
+ (phydev->port == PORT_FIBRE) ? ", fiber mode" : "");
}
/* Set up the buffers and their descriptors, and bring up the
@@ -969,11 +243,15 @@ static void startup_tsec(struct eth_device *dev)
{
int i;
struct tsec_private *priv = (struct tsec_private *)dev->priv;
- volatile tsec_t *regs = priv->regs;
+ tsec_t *regs = priv->regs;
+
+ /* reset the indices to zero */
+ rxIdx = 0;
+ txIdx = 0;
/* Point to the buffer descriptors */
- regs->tbase = (unsigned int)(&rtx.txbd[txIdx]);
- regs->rbase = (unsigned int)(&rtx.rxbd[rxIdx]);
+ out_be32(&regs->tbase, (unsigned int)(&rtx.txbd[txIdx]));
+ out_be32(&regs->rbase, (unsigned int)(&rtx.rxbd[rxIdx]));
/* Initialize the Rx Buffer descriptors */
for (i = 0; i < PKTBUFSRX; i++) {
@@ -991,20 +269,14 @@ static void startup_tsec(struct eth_device *dev)
}
rtx.txbd[TX_BUF_CNT - 1].status |= TXBD_WRAP;
- /* Start up the PHY */
- if(priv->phyinfo)
- phy_run_commands(priv, priv->phyinfo->startup);
-
- adjust_link(dev);
-
/* Enable Transmit and Receive */
- regs->maccfg1 |= (MACCFG1_RX_EN | MACCFG1_TX_EN);
+ setbits_be32(&regs->maccfg1, MACCFG1_RX_EN | MACCFG1_TX_EN);
/* Tell the DMA it is clear to go */
- regs->dmactrl |= DMACTRL_INIT_SETTINGS;
- regs->tstat = TSTAT_CLEAR_THALT;
- regs->rstat = RSTAT_CLEAR_RHALT;
- regs->dmactrl &= ~(DMACTRL_GRS | DMACTRL_GTS);
+ setbits_be32(&regs->dmactrl, DMACTRL_INIT_SETTINGS);
+ out_be32(&regs->tstat, TSTAT_CLEAR_THALT);
+ out_be32(&regs->rstat, RSTAT_CLEAR_RHALT);
+ clrbits_be32(&regs->dmactrl, DMACTRL_GRS | DMACTRL_GTS);
}
/* This returns the status bits of the device. The return value
@@ -1017,7 +289,7 @@ static int tsec_send(struct eth_device *dev, volatile void *packet, int length)
int i;
int result = 0;
struct tsec_private *priv = (struct tsec_private *)dev->priv;
- volatile tsec_t *regs = priv->regs;
+ tsec_t *regs = priv->regs;
/* Find an empty buffer descriptor */
for (i = 0; rtx.txbd[txIdx].status & TXBD_READY; i++) {
@@ -1033,7 +305,7 @@ static int tsec_send(struct eth_device *dev, volatile void *packet, int length)
(TXBD_READY | TXBD_LAST | TXBD_CRC | TXBD_INTERRUPT);
/* Tell the DMA to go */
- regs->tstat = TSTAT_CLEAR_THALT;
+ out_be32(&regs->tstat, TSTAT_CLEAR_THALT);
/* Wait for buffer to be transmitted */
for (i = 0; rtx.txbd[txIdx].status & TXBD_READY; i++) {
@@ -1053,7 +325,7 @@ static int tsec_recv(struct eth_device *dev)
{
int length;
struct tsec_private *priv = (struct tsec_private *)dev->priv;
- volatile tsec_t *regs = priv->regs;
+ tsec_t *regs = priv->regs;
while (!(rtx.rxbd[rxIdx].status & RXBD_EMPTY)) {
@@ -1076,9 +348,9 @@ static int tsec_recv(struct eth_device *dev)
rxIdx = (rxIdx + 1) % PKTBUFSRX;
}
- if (regs->ievent & IEVENT_BSY) {
- regs->ievent = IEVENT_BSY;
- regs->rstat = RSTAT_CLEAR_RHALT;
+ if (in_be32(&regs->ievent) & IEVENT_BSY) {
+ out_be32(&regs->ievent, IEVENT_BSY);
+ out_be32(&regs->rstat, RSTAT_CLEAR_RHALT);
}
return -1;
@@ -1089,936 +361,236 @@ static int tsec_recv(struct eth_device *dev)
static void tsec_halt(struct eth_device *dev)
{
struct tsec_private *priv = (struct tsec_private *)dev->priv;
- volatile tsec_t *regs = priv->regs;
+ tsec_t *regs = priv->regs;
- regs->dmactrl &= ~(DMACTRL_GRS | DMACTRL_GTS);
- regs->dmactrl |= (DMACTRL_GRS | DMACTRL_GTS);
+ clrbits_be32(&regs->dmactrl, DMACTRL_GRS | DMACTRL_GTS);
+ setbits_be32(&regs->dmactrl, DMACTRL_GRS | DMACTRL_GTS);
- while ((regs->ievent & (IEVENT_GRSC | IEVENT_GTSC))
- != (IEVENT_GRSC | IEVENT_GTSC)) ;
+ while ((in_be32(&regs->ievent) & (IEVENT_GRSC | IEVENT_GTSC))
+ != (IEVENT_GRSC | IEVENT_GTSC))
+ ;
- regs->maccfg1 &= ~(MACCFG1_TX_EN | MACCFG1_RX_EN);
+ clrbits_be32(&regs->maccfg1, MACCFG1_TX_EN | MACCFG1_RX_EN);
/* Shut down the PHY, as needed */
- if(priv->phyinfo)
- phy_run_commands(priv, priv->phyinfo->shutdown);
+ phy_shutdown(priv->phydev);
}
-static struct phy_info phy_info_M88E1149S = {
- 0x1410ca,
- "Marvell 88E1149S",
- 4,
- (struct phy_cmd[]) { /* config */
- /* Reset and configure the PHY */
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- {0x1d, 0x1f, NULL},
- {0x1e, 0x200c, NULL},
- {0x1d, 0x5, NULL},
- {0x1e, 0x0, NULL},
- {0x1e, 0x100, NULL},
- {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
- {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- /* Status is read once to clear old link state */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_88E1011_PHY_STATUS, miim_read, &mii_parse_88E1011_psr},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- },
-};
-
-/* The 5411 id is 0x206070, the 5421 is 0x2060e0 */
-static struct phy_info phy_info_BCM5461S = {
- 0x02060c1, /* 5461 ID */
- "Broadcom BCM5461S",
- 0, /* not clear to me what minor revisions we can shift away */
- (struct phy_cmd[]) { /* config */
- /* Reset and configure the PHY */
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
- {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- /* Status is read once to clear old link state */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_BCM54xx_AUXSTATUS, miim_read, &mii_parse_BCM54xx_sr},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- },
-};
-
-static struct phy_info phy_info_BCM5464S = {
- 0x02060b1, /* 5464 ID */
- "Broadcom BCM5464S",
- 0, /* not clear to me what minor revisions we can shift away */
- (struct phy_cmd[]) { /* config */
- /* Reset and configure the PHY */
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
- {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- /* Status is read once to clear old link state */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_BCM54xx_AUXSTATUS, miim_read, &mii_parse_BCM54xx_sr},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- },
-};
-
-static struct phy_info phy_info_BCM5482S = {
- 0x0143bcb,
- "Broadcom BCM5482S",
- 4,
- (struct phy_cmd[]) { /* config */
- /* Reset and configure the PHY */
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- /* Setup read from auxilary control shadow register 7 */
- {MIIM_BCM54xx_AUXCNTL, MIIM_BCM54xx_AUXCNTL_ENCODE(7), NULL},
- /* Read Misc Control register and or in Ethernet@Wirespeed */
- {MIIM_BCM54xx_AUXCNTL, 0, &mii_BCM54xx_wirespeed},
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
- /* Initial config/enable of secondary SerDes interface */
- {MIIM_BCM54XX_SHD, MIIM_BCM54XX_SHD_WR_ENCODE(0x14, 0xf), NULL},
- /* Write intial value to secondary SerDes Contol */
- {MIIM_BCM54XX_EXP_SEL, MIIM_BCM54XX_EXP_SEL_SSD | 0, NULL},
- {MIIM_BCM54XX_EXP_DATA, MIIM_CONTROL_RESTART, NULL},
- /* Enable copper/fiber auto-detect */
- {MIIM_BCM54XX_SHD, MIIM_BCM54XX_SHD_WR_ENCODE(0x1e, 0x201)},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- /* Status is read once to clear old link state */
- {MIIM_STATUS, miim_read, NULL},
- /* Determine copper/fiber, auto-negotiate, and read the result */
- {MIIM_STATUS, miim_read, &mii_parse_BCM5482_sr},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- },
-};
-
-static struct phy_info phy_info_M88E1011S = {
- 0x01410c6,
- "Marvell 88E1011S",
- 4,
- (struct phy_cmd[]) { /* config */
- /* Reset and configure the PHY */
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- {0x1d, 0x1f, NULL},
- {0x1e, 0x200c, NULL},
- {0x1d, 0x5, NULL},
- {0x1e, 0x0, NULL},
- {0x1e, 0x100, NULL},
- {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
- {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- /* Status is read once to clear old link state */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_88E1011_PHY_STATUS, miim_read, &mii_parse_88E1011_psr},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- },
-};
-
-static struct phy_info phy_info_M88E1111S = {
- 0x01410cc,
- "Marvell 88E1111S",
- 4,
- (struct phy_cmd[]) { /* config */
- /* Reset and configure the PHY */
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- {0x1b, 0x848f, &mii_m88e1111s_setmode},
- {0x14, 0x0cd2, NULL}, /* Delay RGMII TX and RX */
- {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
- {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- /* Status is read once to clear old link state */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_88E1011_PHY_STATUS, miim_read, &mii_parse_88E1011_psr},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- },
-};
-
-static struct phy_info phy_info_M88E1118 = {
- 0x01410e1,
- "Marvell 88E1118",
- 4,
- (struct phy_cmd[]) { /* config */
- /* Reset and configure the PHY */
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- {0x16, 0x0002, NULL}, /* Change Page Number */
- {0x15, 0x1070, NULL}, /* Delay RGMII TX and RX */
- {0x16, 0x0003, NULL}, /* Change Page Number */
- {0x10, 0x021e, NULL}, /* Adjust LED control */
- {0x16, 0x0000, NULL}, /* Change Page Number */
- {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
- {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- {0x16, 0x0000, NULL}, /* Change Page Number */
- /* Status is read once to clear old link state */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_88E1011_PHY_STATUS, miim_read,
- &mii_parse_88E1011_psr},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- },
-};
-
-/*
- * Since to access LED register we need do switch the page, we
- * do LED configuring in the miim_read-like function as follows
+/* Initializes data structures and registers for the controller,
+ * and brings the interface up. Returns the link status, meaning
+ * that it returns success if the link is up, failure otherwise.
+ * This allows u-boot to find the first active controller.
*/
-static uint mii_88E1121_set_led (uint mii_reg, struct tsec_private *priv)
+static int tsec_init(struct eth_device *dev, bd_t * bd)
{
- uint pg;
+ uint tempval;
+ char tmpbuf[MAC_ADDR_LEN];
+ int i;
+ struct tsec_private *priv = (struct tsec_private *)dev->priv;
+ tsec_t *regs = priv->regs;
- /* Switch the page to access the led register */
- pg = read_phy_reg(priv, MIIM_88E1121_PHY_PAGE);
- write_phy_reg(priv, MIIM_88E1121_PHY_PAGE, MIIM_88E1121_PHY_LED_PAGE);
+ /* Make sure the controller is stopped */
+ tsec_halt(dev);
- /* Configure leds */
- write_phy_reg(priv, MIIM_88E1121_PHY_LED_CTRL,
- MIIM_88E1121_PHY_LED_DEF);
+ /* Init MACCFG2. Defaults to GMII */
+ out_be32(&regs->maccfg2, MACCFG2_INIT_SETTINGS);
- /* Restore the page pointer */
- write_phy_reg(priv, MIIM_88E1121_PHY_PAGE, pg);
- return 0;
-}
+ /* Init ECNTRL */
+ out_be32(&regs->ecntrl, ECNTRL_INIT_SETTINGS);
-static struct phy_info phy_info_M88E1121R = {
- 0x01410cb,
- "Marvell 88E1121R",
- 4,
- (struct phy_cmd[]) { /* config */
- /* Reset and configure the PHY */
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
- {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
- /* Configure leds */
- {MIIM_88E1121_PHY_LED_CTRL, miim_read, &mii_88E1121_set_led},
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
- /* Disable IRQs and de-assert interrupt */
- {MIIM_88E1121_PHY_IRQ_EN, 0, NULL},
- {MIIM_88E1121_PHY_IRQ_STATUS, miim_read, NULL},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- /* Status is read once to clear old link state */
- {MIIM_STATUS, miim_read, NULL},
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- {MIIM_STATUS, miim_read, &mii_parse_link},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- },
-};
+ /* Copy the station address into the address registers.
+ * Backwards, because little endian MACS are dumb */
+ for (i = 0; i < MAC_ADDR_LEN; i++)
+ tmpbuf[MAC_ADDR_LEN - 1 - i] = dev->enetaddr[i];
-static unsigned int m88e1145_setmode(uint mii_reg, struct tsec_private *priv)
-{
- uint mii_data = read_phy_reg(priv, mii_reg);
-
- /* Setting MIIM_88E1145_PHY_EXT_CR */
- if (priv->flags & TSEC_REDUCED)
- return mii_data |
- MIIM_M88E1145_RGMII_RX_DELAY | MIIM_M88E1145_RGMII_TX_DELAY;
- else
- return mii_data;
-}
+ tempval = (tmpbuf[0] << 24) | (tmpbuf[1] << 16) | (tmpbuf[2] << 8) |
+ tmpbuf[3];
-static struct phy_info phy_info_M88E1145 = {
- 0x01410cd,
- "Marvell 88E1145",
- 4,
- (struct phy_cmd[]) { /* config */
- /* Reset the PHY */
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
-
- /* Errata E0, E1 */
- {29, 0x001b, NULL},
- {30, 0x418f, NULL},
- {29, 0x0016, NULL},
- {30, 0xa2da, NULL},
-
- /* Configure the PHY */
- {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
- {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
- {MIIM_88E1011_PHY_SCR, MIIM_88E1011_PHY_MDI_X_AUTO, NULL},
- {MIIM_88E1145_PHY_EXT_CR, 0, &m88e1145_setmode},
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- {MIIM_CONTROL, MIIM_CONTROL_INIT, NULL},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- /* Status is read once to clear old link state */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- {MIIM_88E1111_PHY_LED_CONTROL, MIIM_88E1111_PHY_LED_DIRECT, NULL},
- /* Read the Status */
- {MIIM_88E1011_PHY_STATUS, miim_read, &mii_parse_88E1011_psr},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- },
-};
+ out_be32(&regs->macstnaddr1, tempval);
-static struct phy_info phy_info_cis8204 = {
- 0x3f11,
- "Cicada Cis8204",
- 6,
- (struct phy_cmd[]) { /* config */
- /* Override PHY config settings */
- {MIIM_CIS8201_AUX_CONSTAT, MIIM_CIS8201_AUXCONSTAT_INIT, NULL},
- /* Configure some basic stuff */
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
- {MIIM_CIS8204_SLED_CON, MIIM_CIS8204_SLEDCON_INIT,
- &mii_cis8204_fixled},
- {MIIM_CIS8204_EPHY_CON, MIIM_CIS8204_EPHYCON_INIT,
- &mii_cis8204_setmode},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- /* Read the Status (2x to make sure link is right) */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_CIS8201_AUX_CONSTAT, miim_read, &mii_parse_cis8201},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- },
-};
+ tempval = *((uint *) (tmpbuf + 4));
-/* Cicada 8201 */
-static struct phy_info phy_info_cis8201 = {
- 0xfc41,
- "CIS8201",
- 4,
- (struct phy_cmd[]) { /* config */
- /* Override PHY config settings */
- {MIIM_CIS8201_AUX_CONSTAT, MIIM_CIS8201_AUXCONSTAT_INIT, NULL},
- /* Set up the interface mode */
- {MIIM_CIS8201_EXT_CON1, MIIM_CIS8201_EXTCON1_INIT, NULL},
- /* Configure some basic stuff */
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- /* Read the Status (2x to make sure link is right) */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_CIS8201_AUX_CONSTAT, miim_read, &mii_parse_cis8201},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- },
-};
+ out_be32(&regs->macstnaddr2, tempval);
-static struct phy_info phy_info_VSC8211 = {
- 0xfc4b,
- "Vitesse VSC8211",
- 4,
- (struct phy_cmd[]) { /* config */
- /* Override PHY config settings */
- {MIIM_CIS8201_AUX_CONSTAT, MIIM_CIS8201_AUXCONSTAT_INIT, NULL},
- /* Set up the interface mode */
- {MIIM_CIS8201_EXT_CON1, MIIM_CIS8201_EXTCON1_INIT, NULL},
- /* Configure some basic stuff */
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- /* Read the Status (2x to make sure link is right) */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_CIS8201_AUX_CONSTAT, miim_read, &mii_parse_cis8201},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- },
-};
+ /* Clear out (for the most part) the other registers */
+ init_registers(regs);
-static struct phy_info phy_info_VSC8244 = {
- 0x3f1b,
- "Vitesse VSC8244",
- 6,
- (struct phy_cmd[]) { /* config */
- /* Override PHY config settings */
- /* Configure some basic stuff */
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- /* Read the Status (2x to make sure link is right) */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_VSC8244_AUX_CONSTAT, miim_read, &mii_parse_vsc8244},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- },
-};
+ /* Ready the device for tx/rx */
+ startup_tsec(dev);
-static struct phy_info phy_info_VSC8641 = {
- 0x7043,
- "Vitesse VSC8641",
- 4,
- (struct phy_cmd[]) { /* config */
- /* Configure some basic stuff */
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- /* Read the Status (2x to make sure link is right) */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_VSC8244_AUX_CONSTAT, miim_read, &mii_parse_vsc8244},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- },
-};
+ /* Start up the PHY */
+ phy_startup(priv->phydev);
-static struct phy_info phy_info_VSC8221 = {
- 0xfc55,
- "Vitesse VSC8221",
- 4,
- (struct phy_cmd[]) { /* config */
- /* Configure some basic stuff */
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- /* Read the Status (2x to make sure link is right) */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_VSC8244_AUX_CONSTAT, miim_read, &mii_parse_vsc8244},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- },
-};
+ adjust_link(priv, priv->phydev);
-static struct phy_info phy_info_VSC8601 = {
- 0x00007042,
- "Vitesse VSC8601",
- 4,
- (struct phy_cmd[]) { /* config */
- /* Override PHY config settings */
- /* Configure some basic stuff */
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
-#ifdef CONFIG_SYS_VSC8601_SKEWFIX
- {MIIM_VSC8601_EPHY_CON,MIIM_VSC8601_EPHY_CON_INIT_SKEW,NULL},
-#if defined(CONFIG_SYS_VSC8601_SKEW_TX) && defined(CONFIG_SYS_VSC8601_SKEW_RX)
- {MIIM_EXT_PAGE_ACCESS,1,NULL},
-#define VSC8101_SKEW \
- (CONFIG_SYS_VSC8601_SKEW_TX << 14) | (CONFIG_SYS_VSC8601_SKEW_RX << 12)
- {MIIM_VSC8601_SKEW_CTRL,VSC8101_SKEW,NULL},
- {MIIM_EXT_PAGE_ACCESS,0,NULL},
-#endif
-#endif
- {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
- {MIIM_CONTROL, MIIM_CONTROL_RESTART, &mii_cr_init},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- /* Read the Status (2x to make sure link is right) */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_VSC8244_AUX_CONSTAT, miim_read, &mii_parse_vsc8244},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- },
-};
+ /* If there's no link, fail */
+ return priv->phydev->link ? 0 : -1;
+}
-static struct phy_info phy_info_dm9161 = {
- 0x0181b88,
- "Davicom DM9161E",
- 4,
- (struct phy_cmd[]) { /* config */
- {MIIM_CONTROL, MIIM_DM9161_CR_STOP, NULL},
- /* Do not bypass the scrambler/descrambler */
- {MIIM_DM9161_SCR, MIIM_DM9161_SCR_INIT, NULL},
- /* Clear 10BTCSR to default */
- {MIIM_DM9161_10BTCSR, MIIM_DM9161_10BTCSR_INIT, NULL},
- /* Configure some basic stuff */
- {MIIM_CONTROL, MIIM_CR_INIT, NULL},
- /* Restart Auto Negotiation */
- {MIIM_CONTROL, MIIM_DM9161_CR_RSTAN, NULL},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- /* Status is read once to clear old link state */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_DM9161_SCSR, miim_read, &mii_parse_dm9161_scsr},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- },
-};
+static phy_interface_t tsec_get_interface(struct tsec_private *priv)
+{
+ tsec_t *regs = priv->regs;
+ u32 ecntrl;
-/* micrel KSZ804 */
-static struct phy_info phy_info_ksz804 = {
- 0x0022151,
- "Micrel KSZ804 PHY",
- 4,
- (struct phy_cmd[]) { /* config */
- {MII_BMCR, BMCR_RESET, NULL},
- {MII_BMCR, BMCR_ANENABLE|BMCR_ANRESTART, NULL},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- {MII_BMSR, miim_read, NULL},
- {MII_BMSR, miim_read, &mii_parse_sr},
- {MII_BMSR, miim_read, &mii_parse_link},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- }
-};
+ ecntrl = in_be32(&regs->ecntrl);
+
+ if (ecntrl & ECNTRL_SGMII_MODE)
+ return PHY_INTERFACE_MODE_SGMII;
-/* a generic flavor. */
-static struct phy_info phy_info_generic = {
- 0,
- "Unknown/Generic PHY",
- 32,
- (struct phy_cmd[]) { /* config */
- {MII_BMCR, BMCR_RESET, NULL},
- {MII_BMCR, BMCR_ANENABLE|BMCR_ANRESTART, NULL},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- {MII_BMSR, miim_read, NULL},
- {MII_BMSR, miim_read, &mii_parse_sr},
- {MII_BMSR, miim_read, &mii_parse_link},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
+ if (ecntrl & ECNTRL_TBI_MODE) {
+ if (ecntrl & ECNTRL_REDUCED_MODE)
+ return PHY_INTERFACE_MODE_RTBI;
+ else
+ return PHY_INTERFACE_MODE_TBI;
}
-};
-static uint mii_parse_lxt971_sr2(uint mii_reg, struct tsec_private *priv)
-{
- unsigned int speed;
- if (priv->link) {
- speed = mii_reg & MIIM_LXT971_SR2_SPEED_MASK;
-
- switch (speed) {
- case MIIM_LXT971_SR2_10HDX:
- priv->speed = 10;
- priv->duplexity = 0;
- break;
- case MIIM_LXT971_SR2_10FDX:
- priv->speed = 10;
- priv->duplexity = 1;
- break;
- case MIIM_LXT971_SR2_100HDX:
- priv->speed = 100;
- priv->duplexity = 0;
- break;
- default:
- priv->speed = 100;
- priv->duplexity = 1;
+ if (ecntrl & ECNTRL_REDUCED_MODE) {
+ if (ecntrl & ECNTRL_REDUCED_MII_MODE)
+ return PHY_INTERFACE_MODE_RMII;
+ else {
+ phy_interface_t interface = priv->interface;
+
+ /*
+ * This isn't autodetected, so it must
+ * be set by the platform code.
+ */
+ if ((interface == PHY_INTERFACE_MODE_RGMII_ID) ||
+ (interface == PHY_INTERFACE_MODE_RGMII_TXID) ||
+ (interface == PHY_INTERFACE_MODE_RGMII_RXID))
+ return interface;
+
+ return PHY_INTERFACE_MODE_RGMII;
}
- } else {
- priv->speed = 0;
- priv->duplexity = 0;
}
- return 0;
+ if (priv->flags & TSEC_GIGABIT)
+ return PHY_INTERFACE_MODE_GMII;
+
+ return PHY_INTERFACE_MODE_MII;
}
-static struct phy_info phy_info_lxt971 = {
- 0x0001378e,
- "LXT971",
- 4,
- (struct phy_cmd[]) { /* config */
- {MIIM_CR, MIIM_CR_INIT, mii_cr_init}, /* autonegotiate */
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup - enable interrupts */
- /* { 0x12, 0x00f2, NULL }, */
- {MIIM_STATUS, miim_read, NULL},
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- {MIIM_LXT971_SR2, miim_read, &mii_parse_lxt971_sr2},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown - disable interrupts */
- {miim_end,}
- },
-};
-/* Parse the DP83865's link and auto-neg status register for speed and duplex
- * information
+/* Discover which PHY is attached to the device, and configure it
+ * properly. If the PHY is not recognized, then return 0
+ * (failure). Otherwise, return 1
*/
-static uint mii_parse_dp83865_lanr(uint mii_reg, struct tsec_private *priv)
+static int init_phy(struct eth_device *dev)
{
- switch (mii_reg & MIIM_DP83865_SPD_MASK) {
-
- case MIIM_DP83865_SPD_1000:
- priv->speed = 1000;
- break;
-
- case MIIM_DP83865_SPD_100:
- priv->speed = 100;
- break;
-
- default:
- priv->speed = 10;
- break;
+ struct tsec_private *priv = (struct tsec_private *)dev->priv;
+ struct phy_device *phydev;
+ tsec_t *regs = priv->regs;
+ u32 supported = (SUPPORTED_10baseT_Half |
+ SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half |
+ SUPPORTED_100baseT_Full);
- }
+ if (priv->flags & TSEC_GIGABIT)
+ supported |= SUPPORTED_1000baseT_Full;
- if (mii_reg & MIIM_DP83865_DPX_FULL)
- priv->duplexity = 1;
- else
- priv->duplexity = 0;
+ /* Assign a Physical address to the TBI */
+ out_be32(&regs->tbipa, CONFIG_SYS_TBIPA_VALUE);
- return 0;
-}
+ priv->interface = tsec_get_interface(priv);
-static struct phy_info phy_info_dp83865 = {
- 0x20005c7,
- "NatSemi DP83865",
- 4,
- (struct phy_cmd[]) { /* config */
- {MIIM_CONTROL, MIIM_DP83865_CR_INIT, NULL},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- /* Status is read once to clear old link state */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the link and auto-neg status */
- {MIIM_DP83865_LANR, miim_read, &mii_parse_dp83865_lanr},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- },
-};
+ if (priv->interface == PHY_INTERFACE_MODE_SGMII)
+ tsec_configure_serdes(priv);
-static struct phy_info phy_info_rtl8211b = {
- 0x001cc91,
- "RealTek RTL8211B",
- 4,
- (struct phy_cmd[]) { /* config */
- /* Reset and configure the PHY */
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
- {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
- {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
- {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- /* Status is read once to clear old link state */
- {MIIM_STATUS, miim_read, NULL},
- /* Auto-negotiate */
- {MIIM_STATUS, miim_read, &mii_parse_sr},
- /* Read the status */
- {MIIM_RTL8211B_PHY_STATUS, miim_read, &mii_parse_RTL8211B_sr},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- },
-};
+ phydev = phy_connect(priv->bus, priv->phyaddr, dev, priv->interface);
-struct phy_info phy_info_AR8021 = {
- 0x4dd04,
- "AR8021",
- 4,
- (struct phy_cmd[]) { /* config */
- {MII_BMCR, BMCR_RESET, NULL},
- {MII_BMCR, BMCR_ANENABLE|BMCR_ANRESTART, NULL},
- {0x1d, 0x05, NULL},
- {0x1e, 0x3D47, NULL},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* startup */
- {MII_BMSR, miim_read, NULL},
- {MII_BMSR, miim_read, &mii_parse_sr},
- {MII_BMSR, miim_read, &mii_parse_link},
- {miim_end,}
- },
- (struct phy_cmd[]) { /* shutdown */
- {miim_end,}
- }
-};
+ phydev->supported &= supported;
+ phydev->advertising = phydev->supported;
-static struct phy_info *phy_info[] = {
- &phy_info_cis8204,
- &phy_info_cis8201,
- &phy_info_BCM5461S,
- &phy_info_BCM5464S,
- &phy_info_BCM5482S,
- &phy_info_M88E1011S,
- &phy_info_M88E1111S,
- &phy_info_M88E1118,
- &phy_info_M88E1121R,
- &phy_info_M88E1145,
- &phy_info_M88E1149S,
- &phy_info_dm9161,
- &phy_info_ksz804,
- &phy_info_lxt971,
- &phy_info_VSC8211,
- &phy_info_VSC8244,
- &phy_info_VSC8601,
- &phy_info_VSC8641,
- &phy_info_VSC8221,
- &phy_info_dp83865,
- &phy_info_rtl8211b,
- &phy_info_AR8021,
- &phy_info_generic, /* must be last; has ID 0 and 32 bit mask */
- NULL
-};
+ priv->phydev = phydev;
-/* Grab the identifier of the device's PHY, and search through
- * all of the known PHYs to see if one matches. If so, return
- * it, if not, return NULL
- */
-static struct phy_info *get_phy_info(struct eth_device *dev)
-{
- struct tsec_private *priv = (struct tsec_private *)dev->priv;
- uint phy_reg, phy_ID;
- int i;
- struct phy_info *theInfo = NULL;
-
- /* Grab the bits from PHYIR1, and put them in the upper half */
- phy_reg = read_phy_reg(priv, MIIM_PHYIR1);
- phy_ID = (phy_reg & 0xffff) << 16;
-
- /* Grab the bits from PHYIR2, and put them in the lower half */
- phy_reg = read_phy_reg(priv, MIIM_PHYIR2);
- phy_ID |= (phy_reg & 0xffff);
-
- /* loop through all the known PHY types, and find one that */
- /* matches the ID we read from the PHY. */
- for (i = 0; phy_info[i]; i++) {
- if (phy_info[i]->id == (phy_ID >> phy_info[i]->shift)) {
- theInfo = phy_info[i];
- break;
- }
- }
+ phy_config(phydev);
- if (theInfo == &phy_info_generic) {
- printf("%s: No support for PHY id %x; assuming generic\n",
- dev->name, phy_ID);
- } else {
- debug("%s: PHY is %s (%x)\n", dev->name, theInfo->name, phy_ID);
- }
-
- return theInfo;
+ return 1;
}
-/* Execute the given series of commands on the given device's
- * PHY, running functions as necessary
+/* Initialize device structure. Returns success if PHY
+ * initialization succeeded (i.e. if it recognizes the PHY)
*/
-static void phy_run_commands(struct tsec_private *priv, struct phy_cmd *cmd)
+static int tsec_initialize(bd_t *bis, struct tsec_info_struct *tsec_info)
{
+ struct eth_device *dev;
int i;
- uint result;
- volatile tsec_mdio_t *phyregs = priv->phyregs;
-
- phyregs->miimcfg = MIIMCFG_RESET;
+ struct tsec_private *priv;
- phyregs->miimcfg = MIIMCFG_INIT_VALUE;
+ dev = (struct eth_device *)malloc(sizeof *dev);
- while (phyregs->miimind & MIIMIND_BUSY) ;
+ if (NULL == dev)
+ return 0;
- for (i = 0; cmd->mii_reg != miim_end; i++) {
- if (cmd->mii_data == miim_read) {
- result = read_phy_reg(priv, cmd->mii_reg);
+ memset(dev, 0, sizeof *dev);
- if (cmd->funct != NULL)
- (*(cmd->funct)) (result, priv);
+ priv = (struct tsec_private *)malloc(sizeof(*priv));
- } else {
- if (cmd->funct != NULL)
- result = (*(cmd->funct)) (cmd->mii_reg, priv);
- else
- result = cmd->mii_data;
+ if (NULL == priv)
+ return 0;
- write_phy_reg(priv, cmd->mii_reg, result);
+ privlist[num_tsecs++] = priv;
+ priv->regs = tsec_info->regs;
+ priv->phyregs_sgmii = tsec_info->miiregs_sgmii;
- }
- cmd++;
- }
-}
+ priv->phyaddr = tsec_info->phyaddr;
+ priv->flags = tsec_info->flags;
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) \
- && !defined(BITBANGMII)
+ sprintf(dev->name, tsec_info->devname);
+ priv->interface = tsec_info->interface;
+ priv->bus = miiphy_get_dev_by_name(tsec_info->mii_devname);
+ dev->iobase = 0;
+ dev->priv = priv;
+ dev->init = tsec_init;
+ dev->halt = tsec_halt;
+ dev->send = tsec_send;
+ dev->recv = tsec_recv;
+#ifdef CONFIG_MCAST_TFTP
+ dev->mcast = tsec_mcast_addr;
+#endif
-/*
- * Read a MII PHY register.
- *
- * Returns:
- * 0 on success
- */
-static int tsec_miiphy_read(const char *devname, unsigned char addr,
- unsigned char reg, unsigned short *value)
-{
- unsigned short ret;
- struct tsec_private *priv = privlist[0];
+ /* Tell u-boot to get the addr from the env */
+ for (i = 0; i < 6; i++)
+ dev->enetaddr[i] = 0;
- if (NULL == priv) {
- printf("Can't read PHY at address %d\n", addr);
- return -1;
- }
+ eth_register(dev);
- ret = (unsigned short)tsec_local_mdio_read(priv->phyregs, addr, reg);
- *value = ret;
+ /* Reset the MAC */
+ setbits_be32(&priv->regs->maccfg1, MACCFG1_SOFT_RESET);
+ udelay(2); /* Soft Reset must be asserted for 3 TX clocks */
+ clrbits_be32(&priv->regs->maccfg1, MACCFG1_SOFT_RESET);
- return 0;
+ /* Try to initialize PHY here, and return */
+ return init_phy(dev);
}
/*
- * Write a MII PHY register.
+ * Initialize all the TSEC devices
*
- * Returns:
- * 0 on success
+ * Returns the number of TSEC devices that were initialized
*/
-static int tsec_miiphy_write(const char *devname, unsigned char addr,
- unsigned char reg, unsigned short value)
+int tsec_eth_init(bd_t *bis, struct tsec_info_struct *tsecs, int num)
{
- struct tsec_private *priv = privlist[0];
+ int i;
+ int ret, count = 0;
- if (NULL == priv) {
- printf("Can't write PHY at address %d\n", addr);
- return -1;
+ for (i = 0; i < num; i++) {
+ ret = tsec_initialize(bis, &tsecs[i]);
+ if (ret > 0)
+ count += ret;
}
- tsec_local_mdio_write(priv->phyregs, addr, reg, value);
-
- return 0;
+ return count;
}
-#endif
-
-#ifdef CONFIG_MCAST_TFTP
-
-/* CREDITS: linux gianfar driver, slightly adjusted... thanx. */
-
-/* Set the appropriate hash bit for the given addr */
-
-/* The algorithm works like so:
- * 1) Take the Destination Address (ie the multicast address), and
- * do a CRC on it (little endian), and reverse the bits of the
- * result.
- * 2) Use the 8 most significant bits as a hash into a 256-entry
- * table. The table is controlled through 8 32-bit registers:
- * gaddr0-7. gaddr0's MSB is entry 0, and gaddr7's LSB is
- * gaddr7. This means that the 3 most significant bits in the
- * hash index which gaddr register to use, and the 5 other bits
- * indicate which bit (assuming an IBM numbering scheme, which
- * for PowerPC (tm) is usually the case) in the tregister holds
- * the entry. */
-static int
-tsec_mcast_addr (struct eth_device *dev, u8 mcast_mac, u8 set)
+int tsec_standard_init(bd_t *bis)
{
- struct tsec_private *priv = privlist[1];
- volatile tsec_t *regs = priv->regs;
- volatile u32 *reg_array, value;
- u8 result, whichbit, whichreg;
+ struct fsl_pq_mdio_info info;
- result = (u8)((ether_crc(MAC_ADDR_LEN,mcast_mac) >> 24) & 0xff);
- whichbit = result & 0x1f; /* the 5 LSB = which bit to set */
- whichreg = result >> 5; /* the 3 MSB = which reg to set it in */
- value = (1 << (31-whichbit));
+ info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
+ info.name = DEFAULT_MII_NAME;
- reg_array = &(regs->hash.gaddr0);
+ fsl_pq_mdio_init(bis, &info);
- if (set) {
- reg_array[whichreg] |= value;
- } else {
- reg_array[whichreg] &= ~value;
- }
- return 0;
+ return tsec_eth_init(bis, tsec_info, ARRAY_SIZE(tsec_info));
}
-#endif /* Multicast TFTP ? */
+
diff --git a/drivers/net/uli526x.c b/drivers/net/uli526x.c
index a4624e1..5933bdd 100644
--- a/drivers/net/uli526x.c
+++ b/drivers/net/uli526x.c
@@ -175,9 +175,9 @@ static u16 read_srom_word(long, int);
static void uli526x_descriptor_init(struct uli526x_board_info *, unsigned long);
static void allocate_rx_buffer(struct uli526x_board_info *);
static void update_cr6(u32, unsigned long);
-static u16 phy_read(unsigned long, u8, u8, u32);
+static u16 uli_phy_read(unsigned long, u8, u8, u32);
static u16 phy_readby_cr10(unsigned long, u8, u8);
-static void phy_write(unsigned long, u8, u8, u16, u32);
+static void uli_phy_write(unsigned long, u8, u8, u16, u32);
static void phy_writeby_cr10(unsigned long, u8, u8, u16);
static void phy_write_1bit(unsigned long, u32, u32);
static u16 phy_read_1bit(unsigned long, u32);
@@ -349,7 +349,7 @@ static void uli526x_disable(struct eth_device *dev)
/* Reset & stop ULI526X board */
outl(ULI526X_RESET, db->ioaddr + DCR0);
udelay(5);
- phy_write(db->ioaddr, db->phy_addr, 0, 0x8000, db->chip_id);
+ uli_phy_write(db->ioaddr, db->phy_addr, 0, 0x8000, db->chip_id);
/* reset the board */
db->cr6_data &= ~(CR6_RXSC | CR6_TXSC); /* Disable Tx/Rx */
@@ -385,7 +385,7 @@ static void uli526x_init(struct eth_device *dev)
db->tx_packet_cnt = 0;
for (phy_tmp = 0; phy_tmp < 32; phy_tmp++) {
/* peer add */
- phy_value = phy_read(db->ioaddr, phy_tmp, 3, db->chip_id);
+ phy_value = uli_phy_read(db->ioaddr, phy_tmp, 3, db->chip_id);
if (phy_value != 0xffff && phy_value != 0) {
db->phy_addr = phy_tmp;
break;
@@ -404,10 +404,10 @@ static void uli526x_init(struct eth_device *dev)
if (!(inl(db->ioaddr + DCR12) & 0x8)) {
/* Phyxcer capability setting */
- phy_reg_reset = phy_read(db->ioaddr,
+ phy_reg_reset = uli_phy_read(db->ioaddr,
db->phy_addr, 0, db->chip_id);
phy_reg_reset = (phy_reg_reset | 0x8000);
- phy_write(db->ioaddr, db->phy_addr, 0,
+ uli_phy_write(db->ioaddr, db->phy_addr, 0,
phy_reg_reset, db->chip_id);
udelay(500);
@@ -781,7 +781,8 @@ static void uli526x_set_phyxcer(struct uli526x_board_info *db)
u16 phy_reg;
/* Phyxcer capability setting */
- phy_reg = phy_read(db->ioaddr, db->phy_addr, 4, db->chip_id) & ~0x01e0;
+ phy_reg = uli_phy_read(db->ioaddr,
+ db->phy_addr, 4, db->chip_id) & ~0x01e0;
if (db->media_mode & ULI526X_AUTO) {
/* AUTO Mode */
@@ -802,10 +803,10 @@ static void uli526x_set_phyxcer(struct uli526x_board_info *db)
phy_reg |= db->PHY_reg4;
db->media_mode |= ULI526X_AUTO;
}
- phy_write(db->ioaddr, db->phy_addr, 4, phy_reg, db->chip_id);
+ uli_phy_write(db->ioaddr, db->phy_addr, 4, phy_reg, db->chip_id);
/* Restart Auto-Negotiation */
- phy_write(db->ioaddr, db->phy_addr, 0, 0x1200, db->chip_id);
+ uli_phy_write(db->ioaddr, db->phy_addr, 0, 0x1200, db->chip_id);
udelay(50);
}
@@ -813,7 +814,7 @@ static void uli526x_set_phyxcer(struct uli526x_board_info *db)
* Write a word to Phy register
*/
-static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset,
+static void uli_phy_write(unsigned long iobase, u8 phy_addr, u8 offset,
u16 phy_data, u32 chip_id)
{
u16 i;
@@ -862,7 +863,8 @@ static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset,
* Read a word data from phy register
*/
-static u16 phy_read(unsigned long iobase, u8 phy_addr, u8 offset, u32 chip_id)
+static u16 uli_phy_read(unsigned long iobase, u8 phy_addr, u8 offset,
+ u32 chip_id)
{
int i;
u16 phy_data;
diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c
index 811e3fc..1ecb137 100644
--- a/drivers/qe/uec.c
+++ b/drivers/qe/uec.c
@@ -30,6 +30,7 @@
#include "uec.h"
#include "uec_phy.h"
#include "miiphy.h"
+#include <phy.h>
/* Default UTBIPAR SMI address */
#ifndef CONFIG_UTBIPAR_INIT_TBIPA
@@ -67,9 +68,6 @@ static uec_info_t uec_info[] = {
static struct eth_device *devlist[MAXCONTROLLERS];
-u16 phy_read (struct uec_mii_info *mii_info, u16 regnum);
-void phy_write (struct uec_mii_info *mii_info, u16 regnum, u16 val);
-
static int uec_mac_enable(uec_private_t *uec, comm_dir_e mode)
{
uec_t *uec_regs;
@@ -324,9 +322,9 @@ static int uec_set_mac_duplex(uec_private_t *uec, int duplex)
}
static int uec_set_mac_if_mode(uec_private_t *uec,
- enum fsl_phy_enet_if if_mode, int speed)
+ phy_interface_t if_mode, int speed)
{
- enum fsl_phy_enet_if enet_if_mode;
+ phy_interface_t enet_if_mode;
uec_info_t *uec_info;
uec_t *uec_regs;
u32 upsmr;
@@ -348,15 +346,15 @@ static int uec_set_mac_if_mode(uec_private_t *uec,
upsmr &= ~(UPSMR_RPM | UPSMR_TBIM | UPSMR_R10M | UPSMR_RMM);
switch (speed) {
- case 10:
+ case SPEED_10:
maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
switch (enet_if_mode) {
- case MII:
+ case PHY_INTERFACE_MODE_MII:
break;
- case RGMII:
+ case PHY_INTERFACE_MODE_RGMII:
upsmr |= (UPSMR_RPM | UPSMR_R10M);
break;
- case RMII:
+ case PHY_INTERFACE_MODE_RMII:
upsmr |= (UPSMR_R10M | UPSMR_RMM);
break;
default:
@@ -364,15 +362,15 @@ static int uec_set_mac_if_mode(uec_private_t *uec,
break;
}
break;
- case 100:
+ case SPEED_100:
maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
switch (enet_if_mode) {
- case MII:
+ case PHY_INTERFACE_MODE_MII:
break;
- case RGMII:
+ case PHY_INTERFACE_MODE_RGMII:
upsmr |= UPSMR_RPM;
break;
- case RMII:
+ case PHY_INTERFACE_MODE_RMII:
upsmr |= UPSMR_RMM;
break;
default:
@@ -380,23 +378,24 @@ static int uec_set_mac_if_mode(uec_private_t *uec,
break;
}
break;
- case 1000:
+ case SPEED_1000:
maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE;
switch (enet_if_mode) {
- case GMII:
+ case PHY_INTERFACE_MODE_GMII:
break;
- case TBI:
+ case PHY_INTERFACE_MODE_TBI:
upsmr |= UPSMR_TBIM;
break;
- case RTBI:
+ case PHY_INTERFACE_MODE_RTBI:
upsmr |= (UPSMR_RPM | UPSMR_TBIM);
break;
- case RGMII_RXID:
- case RGMII_ID:
- case RGMII:
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ case PHY_INTERFACE_MODE_RGMII_TXID:
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ case PHY_INTERFACE_MODE_RGMII:
upsmr |= UPSMR_RPM;
break;
- case SGMII:
+ case PHY_INTERFACE_MODE_SGMII:
upsmr |= UPSMR_SGMM;
break;
default:
@@ -521,7 +520,7 @@ static void adjust_link(struct eth_device *dev)
struct uec_mii_info *mii_info = uec->mii_info;
extern void change_phy_interface_mode(struct eth_device *dev,
- enum fsl_phy_enet_if mode, int speed);
+ phy_interface_t mode, int speed);
uec_regs = uec->uec_regs;
if (mii_info->link) {
@@ -539,19 +538,19 @@ static void adjust_link(struct eth_device *dev)
}
if (mii_info->speed != uec->oldspeed) {
- enum fsl_phy_enet_if mode = \
+ phy_interface_t mode =
uec->uec_info->enet_interface_type;
if (uec->uec_info->uf_info.eth_type == GIGA_ETH) {
switch (mii_info->speed) {
- case 1000:
+ case SPEED_1000:
break;
- case 100:
+ case SPEED_100:
printf ("switching to rgmii 100\n");
- mode = RGMII;
+ mode = PHY_INTERFACE_MODE_RGMII;
break;
- case 10:
+ case SPEED_10:
printf ("switching to rgmii 10\n");
- mode = RGMII;
+ mode = PHY_INTERFACE_MODE_RGMII;
break;
default:
printf("%s: Ack,Speed(%d)is illegal\n",
@@ -1115,8 +1114,8 @@ static int uec_startup(uec_private_t *uec)
out_be32(&uec_regs->utbipar, utbipar);
/* Configure the TBI for SGMII operation */
- if ((uec->uec_info->enet_interface_type == SGMII) &&
- (uec->uec_info->speed == 1000)) {
+ if ((uec->uec_info->enet_interface_type == PHY_INTERFACE_MODE_SGMII) &&
+ (uec->uec_info->speed == SPEED_1000)) {
uec_write_phy_reg(uec->dev, uec_regs->utbipar,
ENET_TBI_MII_ANA, TBIANA_SETTINGS);
diff --git a/drivers/qe/uec.h b/drivers/qe/uec.h
index 94eb9a2..e63bf3a 100644
--- a/drivers/qe/uec.h
+++ b/drivers/qe/uec.h
@@ -25,6 +25,7 @@
#include "qe.h"
#include "uccf.h"
+#include <phy.h>
#include <asm/fsl_enet.h>
#define MAX_TX_THREADS 8
@@ -691,7 +692,7 @@ typedef struct uec_info {
u16 rx_bd_ring_len;
u16 tx_bd_ring_len;
u8 phy_address;
- enum fsl_phy_enet_if enet_interface_type;
+ phy_interface_t enet_interface_type;
int speed;
} uec_info_t;
diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c
index 55c2622..e26218b 100644
--- a/drivers/qe/uec_phy.c
+++ b/drivers/qe/uec_phy.c
@@ -25,6 +25,7 @@
#include "uec.h"
#include "uec_phy.h"
#include "miiphy.h"
+#include <phy.h>
#define ugphy_printk(format, arg...) \
printf(format "\n", ## arg)
@@ -121,8 +122,8 @@ static int gbit_config_aneg (struct uec_mii_info *mii_info);
static int genmii_config_aneg (struct uec_mii_info *mii_info);
static int genmii_update_link (struct uec_mii_info *mii_info);
static int genmii_read_status (struct uec_mii_info *mii_info);
-u16 phy_read (struct uec_mii_info *mii_info, u16 regnum);
-void phy_write (struct uec_mii_info *mii_info, u16 regnum, u16 val);
+u16 uec_phy_read(struct uec_mii_info *mii_info, u16 regnum);
+void uec_phy_write(struct uec_mii_info *mii_info, u16 regnum, u16 val);
/* Write value to the PHY for this device to the register at regnum, */
/* waiting until the write is done before it returns. All PHY */
@@ -242,7 +243,7 @@ static void config_genmii_advert (struct uec_mii_info *mii_info)
advertise = mii_info->advertising;
/* Setup standard advertisement */
- adv = phy_read (mii_info, MII_ADVERTISE);
+ adv = uec_phy_read(mii_info, MII_ADVERTISE);
adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
if (advertise & ADVERTISED_10baseT_Half)
adv |= ADVERTISE_10HALF;
@@ -252,7 +253,7 @@ static void config_genmii_advert (struct uec_mii_info *mii_info)
adv |= ADVERTISE_100HALF;
if (advertise & ADVERTISED_100baseT_Full)
adv |= ADVERTISE_100FULL;
- phy_write (mii_info, MII_ADVERTISE, adv);
+ uec_phy_write(mii_info, MII_ADVERTISE, adv);
}
static void genmii_setup_forced (struct uec_mii_info *mii_info)
@@ -260,7 +261,7 @@ static void genmii_setup_forced (struct uec_mii_info *mii_info)
u16 ctrl;
u32 features = mii_info->phyinfo->features;
- ctrl = phy_read (mii_info, MII_BMCR);
+ ctrl = uec_phy_read(mii_info, MII_BMCR);
ctrl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 |
BMCR_SPEED1000 | BMCR_ANENABLE);
@@ -290,7 +291,7 @@ static void genmii_setup_forced (struct uec_mii_info *mii_info)
break;
}
- phy_write (mii_info, MII_BMCR, ctrl);
+ uec_phy_write(mii_info, MII_BMCR, ctrl);
}
/* Enable and Restart Autonegotiation */
@@ -298,9 +299,9 @@ static void genmii_restart_aneg (struct uec_mii_info *mii_info)
{
u16 ctl;
- ctl = phy_read (mii_info, MII_BMCR);
+ ctl = uec_phy_read(mii_info, MII_BMCR);
ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
- phy_write (mii_info, MII_BMCR, ctl);
+ uec_phy_write(mii_info, MII_BMCR, ctl);
}
static int gbit_config_aneg (struct uec_mii_info *mii_info)
@@ -313,14 +314,14 @@ static int gbit_config_aneg (struct uec_mii_info *mii_info)
config_genmii_advert (mii_info);
advertise = mii_info->advertising;
- adv = phy_read (mii_info, MII_CTRL1000);
+ adv = uec_phy_read(mii_info, MII_CTRL1000);
adv &= ~(ADVERTISE_1000FULL |
ADVERTISE_1000HALF);
if (advertise & SUPPORTED_1000baseT_Half)
adv |= ADVERTISE_1000HALF;
if (advertise & SUPPORTED_1000baseT_Full)
adv |= ADVERTISE_1000FULL;
- phy_write (mii_info, MII_CTRL1000, adv);
+ uec_phy_write(mii_info, MII_CTRL1000, adv);
/* Start/Restart aneg */
genmii_restart_aneg (mii_info);
@@ -335,13 +336,13 @@ static int marvell_config_aneg (struct uec_mii_info *mii_info)
/* The Marvell PHY has an errata which requires
* that certain registers get written in order
* to restart autonegotiation */
- phy_write (mii_info, MII_BMCR, BMCR_RESET);
+ uec_phy_write(mii_info, MII_BMCR, BMCR_RESET);
- phy_write (mii_info, 0x1d, 0x1f);
- phy_write (mii_info, 0x1e, 0x200c);
- phy_write (mii_info, 0x1d, 0x5);
- phy_write (mii_info, 0x1e, 0);
- phy_write (mii_info, 0x1e, 0x100);
+ uec_phy_write(mii_info, 0x1d, 0x1f);
+ uec_phy_write(mii_info, 0x1e, 0x200c);
+ uec_phy_write(mii_info, 0x1d, 0x5);
+ uec_phy_write(mii_info, 0x1e, 0);
+ uec_phy_write(mii_info, 0x1e, 0x100);
gbit_config_aneg (mii_info);
@@ -373,13 +374,13 @@ static int genmii_update_link (struct uec_mii_info *mii_info)
u16 status;
/* Status is read once to clear old link state */
- phy_read (mii_info, MII_BMSR);
+ uec_phy_read(mii_info, MII_BMSR);
/*
* Wait if the link is up, and autonegotiation is in progress
* (ie - we're capable and it's not done)
*/
- status = phy_read(mii_info, MII_BMSR);
+ status = uec_phy_read(mii_info, MII_BMSR);
if ((status & BMSR_LSTATUS) && (status & BMSR_ANEGCAPABLE)
&& !(status & BMSR_ANEGCOMPLETE)) {
int i = 0;
@@ -395,7 +396,7 @@ static int genmii_update_link (struct uec_mii_info *mii_info)
i++;
udelay(1000); /* 1 ms */
- status = phy_read(mii_info, MII_BMSR);
+ status = uec_phy_read(mii_info, MII_BMSR);
}
mii_info->link = 1;
} else {
@@ -420,7 +421,7 @@ static int genmii_read_status (struct uec_mii_info *mii_info)
return err;
if (mii_info->autoneg) {
- status = phy_read(mii_info, MII_STAT1000);
+ status = uec_phy_read(mii_info, MII_STAT1000);
if (status & (LPA_1000FULL | LPA_1000HALF)) {
mii_info->speed = SPEED_1000;
@@ -429,7 +430,7 @@ static int genmii_read_status (struct uec_mii_info *mii_info)
else
mii_info->duplex = DUPLEX_HALF;
} else {
- status = phy_read(mii_info, MII_LPA);
+ status = uec_phy_read(mii_info, MII_LPA);
if (status & (LPA_10FULL | LPA_100FULL))
mii_info->duplex = DUPLEX_FULL;
@@ -456,62 +457,63 @@ static int bcm_init(struct uec_mii_info *mii_info)
gbit_config_aneg(mii_info);
- if ((uec->uec_info->enet_interface_type == RGMII_RXID) &&
- (uec->uec_info->speed == 1000)) {
+ if ((uec->uec_info->enet_interface_type ==
+ PHY_INTERFACE_MODE_RGMII_RXID) &&
+ (uec->uec_info->speed == SPEED_1000)) {
u16 val;
int cnt = 50;
/* Wait for aneg to complete. */
do
- val = phy_read(mii_info, MII_BMSR);
+ val = uec_phy_read(mii_info, MII_BMSR);
while (--cnt && !(val & BMSR_ANEGCOMPLETE));
/* Set RDX clk delay. */
- phy_write(mii_info, 0x18, 0x7 | (7 << 12));
+ uec_phy_write(mii_info, 0x18, 0x7 | (7 << 12));
- val = phy_read(mii_info, 0x18);
+ val = uec_phy_read(mii_info, 0x18);
/* Set RDX-RXC skew. */
val |= (1 << 8);
val |= (7 | (7 << 12));
/* Write bits 14:0. */
val |= (1 << 15);
- phy_write(mii_info, 0x18, val);
+ uec_phy_write(mii_info, 0x18, val);
}
return 0;
}
-static int marvell_init(struct uec_mii_info *mii_info)
+static int uec_marvell_init(struct uec_mii_info *mii_info)
{
struct eth_device *edev = mii_info->dev;
uec_private_t *uec = edev->priv;
- enum fsl_phy_enet_if iface = uec->uec_info->enet_interface_type;
+ phy_interface_t iface = uec->uec_info->enet_interface_type;
int speed = uec->uec_info->speed;
- if ((speed == 1000) &&
- (iface == RGMII_ID ||
- iface == RGMII_RXID ||
- iface == RGMII_TXID)) {
+ if ((speed == SPEED_1000) &&
+ (iface == PHY_INTERFACE_MODE_RGMII_ID ||
+ iface == PHY_INTERFACE_MODE_RGMII_RXID ||
+ iface == PHY_INTERFACE_MODE_RGMII_TXID)) {
int temp;
- temp = phy_read(mii_info, MII_M1111_PHY_EXT_CR);
- if (iface == RGMII_ID) {
+ temp = uec_phy_read(mii_info, MII_M1111_PHY_EXT_CR);
+ if (iface == PHY_INTERFACE_MODE_RGMII_ID) {
temp |= MII_M1111_RX_DELAY | MII_M1111_TX_DELAY;
- } else if (iface == RGMII_RXID) {
+ } else if (iface == PHY_INTERFACE_MODE_RGMII_RXID) {
temp &= ~MII_M1111_TX_DELAY;
temp |= MII_M1111_RX_DELAY;
- } else if (iface == RGMII_TXID) {
+ } else if (iface == PHY_INTERFACE_MODE_RGMII_TXID) {
temp &= ~MII_M1111_RX_DELAY;
temp |= MII_M1111_TX_DELAY;
}
- phy_write(mii_info, MII_M1111_PHY_EXT_CR, temp);
+ uec_phy_write(mii_info, MII_M1111_PHY_EXT_CR, temp);
- temp = phy_read(mii_info, MII_M1111_PHY_EXT_SR);
+ temp = uec_phy_read(mii_info, MII_M1111_PHY_EXT_SR);
temp &= ~MII_M1111_HWCFG_MODE_MASK;
temp |= MII_M1111_HWCFG_MODE_RGMII;
- phy_write(mii_info, MII_M1111_PHY_EXT_SR, temp);
+ uec_phy_write(mii_info, MII_M1111_PHY_EXT_SR, temp);
- phy_write(mii_info, MII_BMCR, BMCR_RESET);
+ uec_phy_write(mii_info, MII_BMCR, BMCR_RESET);
}
return 0;
@@ -534,7 +536,7 @@ static int marvell_read_status (struct uec_mii_info *mii_info)
if (mii_info->autoneg && mii_info->link) {
int speed;
- status = phy_read (mii_info, MII_M1011_PHY_SPEC_STATUS);
+ status = uec_phy_read(mii_info, MII_M1011_PHY_SPEC_STATUS);
/* Get the duplexity */
if (status & MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX)
@@ -564,7 +566,7 @@ static int marvell_read_status (struct uec_mii_info *mii_info)
static int marvell_ack_interrupt (struct uec_mii_info *mii_info)
{
/* Clear the interrupts by reading the reg */
- phy_read (mii_info, MII_M1011_IEVENT);
+ uec_phy_read(mii_info, MII_M1011_IEVENT);
return 0;
}
@@ -572,9 +574,10 @@ static int marvell_ack_interrupt (struct uec_mii_info *mii_info)
static int marvell_config_intr (struct uec_mii_info *mii_info)
{
if (mii_info->interrupts == MII_INTERRUPT_ENABLED)
- phy_write (mii_info, MII_M1011_IMASK, MII_M1011_IMASK_INIT);
+ uec_phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_INIT);
else
- phy_write (mii_info, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR);
+ uec_phy_write(mii_info, MII_M1011_IMASK,
+ MII_M1011_IMASK_CLEAR);
return 0;
}
@@ -582,13 +585,13 @@ static int marvell_config_intr (struct uec_mii_info *mii_info)
static int dm9161_init (struct uec_mii_info *mii_info)
{
/* Reset the PHY */
- phy_write (mii_info, MII_BMCR, phy_read (mii_info, MII_BMCR) |
+ uec_phy_write(mii_info, MII_BMCR, uec_phy_read(mii_info, MII_BMCR) |
BMCR_RESET);
/* PHY and MAC connect */
- phy_write (mii_info, MII_BMCR, phy_read (mii_info, MII_BMCR) &
+ uec_phy_write(mii_info, MII_BMCR, uec_phy_read(mii_info, MII_BMCR) &
~BMCR_ISOLATE);
- phy_write (mii_info, MII_DM9161_SCR, MII_DM9161_SCR_INIT);
+ uec_phy_write(mii_info, MII_DM9161_SCR, MII_DM9161_SCR_INIT);
config_genmii_advert (mii_info);
/* Start/restart aneg */
@@ -614,7 +617,7 @@ static int dm9161_read_status (struct uec_mii_info *mii_info)
/* If the link is up, read the speed and duplex
If we aren't autonegotiating assume speeds are as set */
if (mii_info->autoneg && mii_info->link) {
- status = phy_read (mii_info, MII_DM9161_SCSR);
+ status = uec_phy_read(mii_info, MII_DM9161_SCSR);
if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_100H))
mii_info->speed = SPEED_100;
else
@@ -632,7 +635,7 @@ static int dm9161_read_status (struct uec_mii_info *mii_info)
static int dm9161_ack_interrupt (struct uec_mii_info *mii_info)
{
/* Clear the interrupt by reading the reg */
- phy_read (mii_info, MII_DM9161_INTR);
+ uec_phy_read(mii_info, MII_DM9161_INTR);
return 0;
}
@@ -640,9 +643,9 @@ static int dm9161_ack_interrupt (struct uec_mii_info *mii_info)
static int dm9161_config_intr (struct uec_mii_info *mii_info)
{
if (mii_info->interrupts == MII_INTERRUPT_ENABLED)
- phy_write (mii_info, MII_DM9161_INTR, MII_DM9161_INTR_INIT);
+ uec_phy_write(mii_info, MII_DM9161_INTR, MII_DM9161_INTR_INIT);
else
- phy_write (mii_info, MII_DM9161_INTR, MII_DM9161_INTR_STOP);
+ uec_phy_write(mii_info, MII_DM9161_INTR, MII_DM9161_INTR_STOP);
return 0;
}
@@ -696,7 +699,7 @@ static int smsc_read_status (struct uec_mii_info *mii_info)
if (mii_info->autoneg && mii_info->link) {
int val;
- status = phy_read (mii_info, 0x1f);
+ status = uec_phy_read(mii_info, 0x1f);
val = (status & 0x1c) >> 2;
switch (val) {
@@ -751,7 +754,7 @@ static struct phy_info phy_info_marvell = {
.phy_id_mask = 0xffffff00,
.name = "Marvell 88E11x1",
.features = MII_GBIT_FEATURES,
- .init = &marvell_init,
+ .init = &uec_marvell_init,
.config_aneg = &marvell_config_aneg,
.read_status = &marvell_read_status,
.ack_interrupt = &marvell_ack_interrupt,
@@ -804,12 +807,12 @@ static struct phy_info *phy_info[] = {
NULL
};
-u16 phy_read (struct uec_mii_info *mii_info, u16 regnum)
+u16 uec_phy_read(struct uec_mii_info *mii_info, u16 regnum)
{
return mii_info->mdio_read (mii_info->dev, mii_info->mii_id, regnum);
}
-void phy_write (struct uec_mii_info *mii_info, u16 regnum, u16 val)
+void uec_phy_write(struct uec_mii_info *mii_info, u16 regnum, u16 val)
{
mii_info->mdio_write (mii_info->dev, mii_info->mii_id, regnum, val);
}
@@ -825,11 +828,11 @@ struct phy_info *uec_get_phy_info (struct uec_mii_info *mii_info)
struct phy_info *theInfo = NULL;
/* Grab the bits from PHYIR1, and put them in the upper half */
- phy_reg = phy_read (mii_info, MII_PHYSID1);
+ phy_reg = uec_phy_read(mii_info, MII_PHYSID1);
phy_ID = (phy_reg & 0xffff) << 16;
/* Grab the bits from PHYIR2, and put them in the lower half */
- phy_reg = phy_read (mii_info, MII_PHYSID2);
+ phy_reg = uec_phy_read(mii_info, MII_PHYSID2);
phy_ID |= (phy_reg & 0xffff);
/* loop through all the known PHY types, and find one that */
@@ -852,10 +855,8 @@ struct phy_info *uec_get_phy_info (struct uec_mii_info *mii_info)
return theInfo;
}
-void marvell_phy_interface_mode (struct eth_device *dev,
- enum fsl_phy_enet_if type,
- int speed
- )
+void marvell_phy_interface_mode(struct eth_device *dev, phy_interface_t type,
+ int speed)
{
uec_private_t *uec = (uec_private_t *) dev->priv;
struct uec_mii_info *mii_info;
@@ -867,47 +868,47 @@ void marvell_phy_interface_mode (struct eth_device *dev,
}
mii_info = uec->mii_info;
- if (type == RGMII) {
- if (speed == 100) {
- phy_write (mii_info, 0x00, 0x9140);
- phy_write (mii_info, 0x1d, 0x001f);
- phy_write (mii_info, 0x1e, 0x200c);
- phy_write (mii_info, 0x1d, 0x0005);
- phy_write (mii_info, 0x1e, 0x0000);
- phy_write (mii_info, 0x1e, 0x0100);
- phy_write (mii_info, 0x09, 0x0e00);
- phy_write (mii_info, 0x04, 0x01e1);
- phy_write (mii_info, 0x00, 0x9140);
- phy_write (mii_info, 0x00, 0x1000);
+ if (type == PHY_INTERFACE_MODE_RGMII) {
+ if (speed == SPEED_100) {
+ uec_phy_write(mii_info, 0x00, 0x9140);
+ uec_phy_write(mii_info, 0x1d, 0x001f);
+ uec_phy_write(mii_info, 0x1e, 0x200c);
+ uec_phy_write(mii_info, 0x1d, 0x0005);
+ uec_phy_write(mii_info, 0x1e, 0x0000);
+ uec_phy_write(mii_info, 0x1e, 0x0100);
+ uec_phy_write(mii_info, 0x09, 0x0e00);
+ uec_phy_write(mii_info, 0x04, 0x01e1);
+ uec_phy_write(mii_info, 0x00, 0x9140);
+ uec_phy_write(mii_info, 0x00, 0x1000);
udelay (100000);
- phy_write (mii_info, 0x00, 0x2900);
- phy_write (mii_info, 0x14, 0x0cd2);
- phy_write (mii_info, 0x00, 0xa100);
- phy_write (mii_info, 0x09, 0x0000);
- phy_write (mii_info, 0x1b, 0x800b);
- phy_write (mii_info, 0x04, 0x05e1);
- phy_write (mii_info, 0x00, 0xa100);
- phy_write (mii_info, 0x00, 0x2100);
+ uec_phy_write(mii_info, 0x00, 0x2900);
+ uec_phy_write(mii_info, 0x14, 0x0cd2);
+ uec_phy_write(mii_info, 0x00, 0xa100);
+ uec_phy_write(mii_info, 0x09, 0x0000);
+ uec_phy_write(mii_info, 0x1b, 0x800b);
+ uec_phy_write(mii_info, 0x04, 0x05e1);
+ uec_phy_write(mii_info, 0x00, 0xa100);
+ uec_phy_write(mii_info, 0x00, 0x2100);
udelay (1000000);
- } else if (speed == 10) {
- phy_write (mii_info, 0x14, 0x8e40);
- phy_write (mii_info, 0x1b, 0x800b);
- phy_write (mii_info, 0x14, 0x0c82);
- phy_write (mii_info, 0x00, 0x8100);
+ } else if (speed == SPEED_10) {
+ uec_phy_write(mii_info, 0x14, 0x8e40);
+ uec_phy_write(mii_info, 0x1b, 0x800b);
+ uec_phy_write(mii_info, 0x14, 0x0c82);
+ uec_phy_write(mii_info, 0x00, 0x8100);
udelay (1000000);
}
}
/* handle 88e1111 rev.B2 erratum 5.6 */
if (mii_info->autoneg) {
- status = phy_read (mii_info, MII_BMCR);
- phy_write (mii_info, MII_BMCR, status | BMCR_ANENABLE);
+ status = uec_phy_read(mii_info, MII_BMCR);
+ uec_phy_write(mii_info, MII_BMCR, status | BMCR_ANENABLE);
}
/* now the B2 will correctly report autoneg completion status */
}
void change_phy_interface_mode (struct eth_device *dev,
- enum fsl_phy_enet_if type, int speed)
+ phy_interface_t type, int speed)
{
#ifdef CONFIG_PHY_MODE_NEED_CHANGE
marvell_phy_interface_mode (dev, type, speed);
diff --git a/include/config_phylib_all_drivers.h b/include/config_phylib_all_drivers.h
new file mode 100644
index 0000000..903c7a7
--- /dev/null
+++ b/include/config_phylib_all_drivers.h
@@ -0,0 +1,32 @@
+/*
+ * Enable all PHYs
+ *
+ * This software may be used and distributed according to the
+ * terms of the GNU Public License, Version 2, incorporated
+ * herein by reference.
+ *
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * author Andy Fleming
+ *
+ */
+#ifndef _CONFIG_PHYLIB_ALL_H
+#define _CONFIG_PHYLIB_ALL_H
+
+#ifdef CONFIG_PHYLIB
+
+#define CONFIG_PHY_VITESSE
+#define CONFIG_PHY_MARVELL
+#define CONFIG_PHY_MICREL
+#define CONFIG_PHY_BROADCOM
+#define CONFIG_PHY_DAVICOM
+#define CONFIG_PHY_REALTEK
+#define CONFIG_PHY_NATSEMI
+#define CONFIG_PHY_LXT
+
+#ifdef CONFIG_PHYLIB_10G
+#define CONFIG_PHY_TERANETICS
+#endif /* CONFIG_PHYLIB_10G */
+
+#endif /* CONFIG_PHYLIB */
+
+#endif /*_CONFIG_PHYLIB_ALL_H */
diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h
index 1191eea..e25d5ac 100644
--- a/include/configs/MPC8323ERDB.h
+++ b/include/configs/MPC8323ERDB.h
@@ -348,7 +348,7 @@
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK10
#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR 4
-#define CONFIG_SYS_UEC1_INTERFACE_TYPE MII
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_MII
#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
#endif
@@ -360,7 +360,7 @@
#define CONFIG_SYS_UEC2_TX_CLK QE_CLK3
#define CONFIG_SYS_UEC2_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC2_PHY_ADDR 0
-#define CONFIG_SYS_UEC2_INTERFACE_TYPE MII
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_MII
#define CONFIG_SYS_UEC2_INTERFACE_SPEED 100
#endif
diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h
index affa3a9..f136a8e 100644
--- a/include/configs/MPC832XEMDS.h
+++ b/include/configs/MPC832XEMDS.h
@@ -361,7 +361,7 @@
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK10
#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR 3
-#define CONFIG_SYS_UEC1_INTERFACE_TYPE MII
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_MII
#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
#endif
@@ -373,7 +373,7 @@
#define CONFIG_SYS_UEC2_TX_CLK QE_CLK8
#define CONFIG_SYS_UEC2_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC2_PHY_ADDR 4
-#define CONFIG_SYS_UEC2_INTERFACE_TYPE MII
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_MII
#define CONFIG_SYS_UEC2_INTERFACE_SPEED 100
#endif
diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h
index a959940..49d64a5 100644
--- a/include/configs/MPC8360EMDS.h
+++ b/include/configs/MPC8360EMDS.h
@@ -402,7 +402,7 @@
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK9
#define CONFIG_SYS_UEC1_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR 0
-#define CONFIG_SYS_UEC1_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
#define CONFIG_SYS_UEC1_INTERFACE_SPEED 1000
#endif
@@ -414,7 +414,7 @@
#define CONFIG_SYS_UEC2_TX_CLK QE_CLK4
#define CONFIG_SYS_UEC2_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC2_PHY_ADDR 1
-#define CONFIG_SYS_UEC2_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
#define CONFIG_SYS_UEC2_INTERFACE_SPEED 1000
#endif
diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h
index b0cdc02..a4f42cf 100644
--- a/include/configs/MPC8360ERDK.h
+++ b/include/configs/MPC8360ERDK.h
@@ -319,7 +319,7 @@
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK9
#define CONFIG_SYS_UEC1_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR 2
-#define CONFIG_SYS_UEC1_INTERFACE_TYPE RGMII_RXID
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_RXID
#define CONFIG_SYS_UEC1_INTERFACE_SPEED 1000
#endif
@@ -331,7 +331,7 @@
#define CONFIG_SYS_UEC2_TX_CLK QE_CLK4
#define CONFIG_SYS_UEC2_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC2_PHY_ADDR 4
-#define CONFIG_SYS_UEC2_INTERFACE_TYPE RGMII_RXID
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_RXID
#define CONFIG_SYS_UEC2_INTERFACE_SPEED 1000
#endif
diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index 3674e49..6237b23 100644
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -334,7 +334,7 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK16
#define CONFIG_SYS_UEC1_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR 7
-#define CONFIG_SYS_UEC1_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
#define CONFIG_SYS_UEC1_INTERFACE_SPEED 1000
#endif
@@ -346,7 +346,7 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_UEC2_TX_CLK QE_CLK16
#define CONFIG_SYS_UEC2_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC2_PHY_ADDR 1
-#define CONFIG_SYS_UEC2_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
#define CONFIG_SYS_UEC2_INTERFACE_SPEED 1000
#endif
#endif /* CONFIG_QE */
diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h
index 5a7e99e..8835ef5 100644
--- a/include/configs/MPC8569MDS.h
+++ b/include/configs/MPC8569MDS.h
@@ -385,13 +385,13 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK12
#define CONFIG_SYS_UEC1_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR 7
-#define CONFIG_SYS_UEC1_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
#define CONFIG_SYS_UEC1_INTERFACE_SPEED 1000
#elif defined(CONFIG_SYS_UCC_RMII_MODE)
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK16 /* CLK16 for RMII */
#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR 8 /* 0x8 for RMII */
-#define CONFIG_SYS_UEC1_INTERFACE_TYPE RMII
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
#endif /* CONFIG_SYS_UCC_RGMII_MODE */
#endif /* CONFIG_UEC_ETH1 */
@@ -406,13 +406,13 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_UEC2_TX_CLK QE_CLK17
#define CONFIG_SYS_UEC2_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC2_PHY_ADDR 1
-#define CONFIG_SYS_UEC2_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
#define CONFIG_SYS_UEC2_INTERFACE_SPEED 1000
#elif defined(CONFIG_SYS_UCC_RMII_MODE)
#define CONFIG_SYS_UEC2_TX_CLK QE_CLK16 /* CLK 16 for RMII */
#define CONFIG_SYS_UEC2_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC2_PHY_ADDR 0x9 /* 0x9 for RMII */
-#define CONFIG_SYS_UEC2_INTERFACE_TYPE RMII
+#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
#define CONFIG_SYS_UEC2_INTERFACE_SPEED 100
#endif /* CONFIG_SYS_UCC_RGMII_MODE */
#endif /* CONFIG_UEC_ETH2 */
@@ -427,13 +427,13 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_UEC3_TX_CLK QE_CLK12
#define CONFIG_SYS_UEC3_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC3_PHY_ADDR 2
-#define CONFIG_SYS_UEC3_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC3_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
#define CONFIG_SYS_UEC3_INTERFACE_SPEED 1000
#elif defined(CONFIG_SYS_UCC_RMII_MODE)
#define CONFIG_SYS_UEC3_TX_CLK QE_CLK16 /* CLK_16 for RMII */
#define CONFIG_SYS_UEC3_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC3_PHY_ADDR 0xA /* 0xA for RMII */
-#define CONFIG_SYS_UEC3_INTERFACE_TYPE RMII
+#define CONFIG_SYS_UEC3_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
#define CONFIG_SYS_UEC3_INTERFACE_SPEED 100
#endif /* CONFIG_SYS_UCC_RGMII_MODE */
#endif /* CONFIG_UEC_ETH3 */
@@ -448,13 +448,13 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_UEC4_TX_CLK QE_CLK17
#define CONFIG_SYS_UEC4_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC4_PHY_ADDR 3
-#define CONFIG_SYS_UEC4_INTERFACE_TYPE RGMII_ID
+#define CONFIG_SYS_UEC4_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII_ID
#define CONFIG_SYS_UEC4_INTERFACE_SPEED 1000
#elif defined(CONFIG_SYS_UCC_RMII_MODE)
#define CONFIG_SYS_UEC4_TX_CLK QE_CLK16 /* CLK16 for RMII */
#define CONFIG_SYS_UEC4_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC4_PHY_ADDR 0xB /* 0xB for RMII */
-#define CONFIG_SYS_UEC4_INTERFACE_TYPE RMII
+#define CONFIG_SYS_UEC4_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
#define CONFIG_SYS_UEC4_INTERFACE_SPEED 100
#endif /* CONFIG_SYS_UCC_RGMII_MODE */
#endif /* CONFIG_UEC_ETH4 */
@@ -468,7 +468,7 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_UEC6_TX_CLK QE_CLK_NONE
#define CONFIG_SYS_UEC6_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC6_PHY_ADDR 4
-#define CONFIG_SYS_UEC6_INTERFACE_TYPE SGMII
+#define CONFIG_SYS_UEC6_INTERFACE_TYPE PHY_INTERFACE_MODE_SGMII
#define CONFIG_SYS_UEC6_INTERFACE_SPEED 1000
#endif /* CONFIG_UEC_ETH6 */
@@ -481,7 +481,7 @@ extern unsigned long get_clock_freq(void);
#define CONFIG_SYS_UEC8_TX_CLK QE_CLK_NONE
#define CONFIG_SYS_UEC8_ETH_TYPE GIGA_ETH
#define CONFIG_SYS_UEC8_PHY_ADDR 6
-#define CONFIG_SYS_UEC8_INTERFACE_TYPE SGMII
+#define CONFIG_SYS_UEC8_INTERFACE_TYPE PHY_INTERFACE_MODE_SGMII
#define CONFIG_SYS_UEC8_INTERFACE_SPEED 1000
#endif /* CONFIG_UEC_ETH8 */
diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h
index 8fcadfe..b98e6a1 100644
--- a/include/configs/kmeter1.h
+++ b/include/configs/kmeter1.h
@@ -295,7 +295,7 @@
#define CONFIG_SYS_UEC1_TX_CLK QE_CLK17
#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR 0
-#define CONFIG_SYS_UEC1_INTERFACE_TYPE RMII
+#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
#endif
diff --git a/include/fsl_mdio.h b/include/fsl_mdio.h
new file mode 100644
index 0000000..17ca79c
--- /dev/null
+++ b/include/fsl_mdio.h
@@ -0,0 +1,62 @@
+/*
+ * Copyright 2009-2010 Freescale Semiconductor, Inc.
+ * Jun-jie Zhang <b18070@freescale.com>
+ * Mingkai Hu <Mingkai.hu@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __FSL_PHY_H__
+#define __FSL_PHY_H__
+
+#include <net.h>
+#include <miiphy.h>
+#include <asm/fsl_enet.h>
+
+/* PHY register offsets */
+#define PHY_EXT_PAGE_ACCESS 0x1f
+
+/* MII Management Configuration Register */
+#define MIIMCFG_RESET_MGMT 0x80000000
+#define MIIMCFG_MGMT_CLOCK_SELECT 0x00000007
+#define MIIMCFG_INIT_VALUE 0x00000003
+
+/* MII Management Command Register */
+#define MIIMCOM_READ_CYCLE 0x00000001
+#define MIIMCOM_SCAN_CYCLE 0x00000002
+
+/* MII Management Address Register */
+#define MIIMADD_PHY_ADDR_SHIFT 8
+
+/* MII Management Indicator Register */
+#define MIIMIND_BUSY 0x00000001
+#define MIIMIND_NOTVALID 0x00000004
+
+void tsec_local_mdio_write(struct tsec_mii_mng *phyregs, int port_addr,
+ int dev_addr, int reg, int value);
+int tsec_local_mdio_read(struct tsec_mii_mng *phyregs, int port_addr,
+ int dev_addr, int regnum);
+int tsec_phy_read(struct mii_dev *bus, int addr, int dev_addr, int regnum);
+int tsec_phy_write(struct mii_dev *bus, int addr, int dev_addr, int regnum,
+ u16 value);
+
+struct fsl_pq_mdio_info {
+ struct tsec_mii_mng *regs;
+ char *name;
+};
+int fsl_pq_mdio_init(bd_t *bis, struct fsl_pq_mdio_info *info);
+
+#endif /* __FSL_PHY_H__ */
+
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
new file mode 100644
index 0000000..fcb20fe
--- /dev/null
+++ b/include/linux/ethtool.h
@@ -0,0 +1,721 @@
+/*
+ * ethtool.h: Defines for Linux ethtool.
+ *
+ * Copyright (C) 1998 David S. Miller (davem@redhat.com)
+ * Copyright 2001 Jeff Garzik <jgarzik@pobox.com>
+ * Portions Copyright 2001 Sun Microsystems (thockin@sun.com)
+ * Portions Copyright 2002 Intel (eli.kupermann@intel.com,
+ * christopher.leech@intel.com,
+ * scott.feldman@intel.com)
+ * Portions Copyright (C) Sun Microsystems 2008
+ */
+
+#ifndef _LINUX_ETHTOOL_H
+#define _LINUX_ETHTOOL_H
+
+#include <linux/types.h>
+
+/* This should work for both 32 and 64 bit userland. */
+struct ethtool_cmd {
+ __u32 cmd;
+ __u32 supported; /* Features this interface supports */
+ __u32 advertising; /* Features this interface advertises */
+ __u16 speed; /* The forced speed, 10Mb, 100Mb, gigabit */
+ __u8 duplex; /* Duplex, half or full */
+ __u8 port; /* Which connector port */
+ __u8 phy_address;
+ __u8 transceiver; /* Which transceiver to use */
+ __u8 autoneg; /* Enable or disable autonegotiation */
+ __u8 mdio_support;
+ __u32 maxtxpkt; /* Tx pkts before generating tx int */
+ __u32 maxrxpkt; /* Rx pkts before generating rx int */
+ __u16 speed_hi;
+ __u8 eth_tp_mdix;
+ __u8 reserved2;
+ __u32 lp_advertising; /* Features the link partner advertises */
+ __u32 reserved[2];
+};
+
+static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep,
+ __u32 speed)
+{
+
+ ep->speed = (__u16)speed;
+ ep->speed_hi = (__u16)(speed >> 16);
+}
+
+static inline __u32 ethtool_cmd_speed(struct ethtool_cmd *ep)
+{
+ return (ep->speed_hi << 16) | ep->speed;
+}
+
+#define ETHTOOL_FWVERS_LEN 32
+#define ETHTOOL_BUSINFO_LEN 32
+/* these strings are set to whatever the driver author decides... */
+struct ethtool_drvinfo {
+ __u32 cmd;
+ char driver[32]; /* driver short name, "tulip", "eepro100" */
+ char version[32]; /* driver version string */
+ char fw_version[ETHTOOL_FWVERS_LEN]; /* firmware version string */
+ char bus_info[ETHTOOL_BUSINFO_LEN]; /* Bus info for this IF. */
+ /* For PCI devices, use pci_name(pci_dev). */
+ char reserved1[32];
+ char reserved2[12];
+ /*
+ * Some struct members below are filled in
+ * using ops->get_sset_count(). Obtaining
+ * this info from ethtool_drvinfo is now
+ * deprecated; Use ETHTOOL_GSSET_INFO
+ * instead.
+ */
+ __u32 n_priv_flags; /* number of flags valid in ETHTOOL_GPFLAGS */
+ __u32 n_stats; /* number of u64's from ETHTOOL_GSTATS */
+ __u32 testinfo_len;
+ __u32 eedump_len; /* Size of data from ETHTOOL_GEEPROM (bytes) */
+ __u32 regdump_len; /* Size of data from ETHTOOL_GREGS (bytes) */
+};
+
+#define SOPASS_MAX 6
+/* wake-on-lan settings */
+struct ethtool_wolinfo {
+ __u32 cmd;
+ __u32 supported;
+ __u32 wolopts;
+ __u8 sopass[SOPASS_MAX]; /* SecureOn(tm) password */
+};
+
+/* for passing single values */
+struct ethtool_value {
+ __u32 cmd;
+ __u32 data;
+};
+
+/* for passing big chunks of data */
+struct ethtool_regs {
+ __u32 cmd;
+ __u32 version; /* driver-specific, indicates different chips/revs */
+ __u32 len; /* bytes */
+ __u8 data[0];
+};
+
+/* for passing EEPROM chunks */
+struct ethtool_eeprom {
+ __u32 cmd;
+ __u32 magic;
+ __u32 offset; /* in bytes */
+ __u32 len; /* in bytes */
+ __u8 data[0];
+};
+
+/* for configuring coalescing parameters of chip */
+struct ethtool_coalesce {
+ __u32 cmd; /* ETHTOOL_{G,S}COALESCE */
+
+ /* How many usecs to delay an RX interrupt after
+ * a packet arrives. If 0, only rx_max_coalesced_frames
+ * is used.
+ */
+ __u32 rx_coalesce_usecs;
+
+ /* How many packets to delay an RX interrupt after
+ * a packet arrives. If 0, only rx_coalesce_usecs is
+ * used. It is illegal to set both usecs and max frames
+ * to zero as this would cause RX interrupts to never be
+ * generated.
+ */
+ __u32 rx_max_coalesced_frames;
+
+ /* Same as above two parameters, except that these values
+ * apply while an IRQ is being serviced by the host. Not
+ * all cards support this feature and the values are ignored
+ * in that case.
+ */
+ __u32 rx_coalesce_usecs_irq;
+ __u32 rx_max_coalesced_frames_irq;
+
+ /* How many usecs to delay a TX interrupt after
+ * a packet is sent. If 0, only tx_max_coalesced_frames
+ * is used.
+ */
+ __u32 tx_coalesce_usecs;
+
+ /* How many packets to delay a TX interrupt after
+ * a packet is sent. If 0, only tx_coalesce_usecs is
+ * used. It is illegal to set both usecs and max frames
+ * to zero as this would cause TX interrupts to never be
+ * generated.
+ */
+ __u32 tx_max_coalesced_frames;
+
+ /* Same as above two parameters, except that these values
+ * apply while an IRQ is being serviced by the host. Not
+ * all cards support this feature and the values are ignored
+ * in that case.
+ */
+ __u32 tx_coalesce_usecs_irq;
+ __u32 tx_max_coalesced_frames_irq;
+
+ /* How many usecs to delay in-memory statistics
+ * block updates. Some drivers do not have an in-memory
+ * statistic block, and in such cases this value is ignored.
+ * This value must not be zero.
+ */
+ __u32 stats_block_coalesce_usecs;
+
+ /* Adaptive RX/TX coalescing is an algorithm implemented by
+ * some drivers to improve latency under low packet rates and
+ * improve throughput under high packet rates. Some drivers
+ * only implement one of RX or TX adaptive coalescing. Anything
+ * not implemented by the driver causes these values to be
+ * silently ignored.
+ */
+ __u32 use_adaptive_rx_coalesce;
+ __u32 use_adaptive_tx_coalesce;
+
+ /* When the packet rate (measured in packets per second)
+ * is below pkt_rate_low, the {rx,tx}_*_low parameters are
+ * used.
+ */
+ __u32 pkt_rate_low;
+ __u32 rx_coalesce_usecs_low;
+ __u32 rx_max_coalesced_frames_low;
+ __u32 tx_coalesce_usecs_low;
+ __u32 tx_max_coalesced_frames_low;
+
+ /* When the packet rate is below pkt_rate_high but above
+ * pkt_rate_low (both measured in packets per second) the
+ * normal {rx,tx}_* coalescing parameters are used.
+ */
+
+ /* When the packet rate is (measured in packets per second)
+ * is above pkt_rate_high, the {rx,tx}_*_high parameters are
+ * used.
+ */
+ __u32 pkt_rate_high;
+ __u32 rx_coalesce_usecs_high;
+ __u32 rx_max_coalesced_frames_high;
+ __u32 tx_coalesce_usecs_high;
+ __u32 tx_max_coalesced_frames_high;
+
+ /* How often to do adaptive coalescing packet rate sampling,
+ * measured in seconds. Must not be zero.
+ */
+ __u32 rate_sample_interval;
+};
+
+/* for configuring RX/TX ring parameters */
+struct ethtool_ringparam {
+ __u32 cmd; /* ETHTOOL_{G,S}RINGPARAM */
+
+ /* Read only attributes. These indicate the maximum number
+ * of pending RX/TX ring entries the driver will allow the
+ * user to set.
+ */
+ __u32 rx_max_pending;
+ __u32 rx_mini_max_pending;
+ __u32 rx_jumbo_max_pending;
+ __u32 tx_max_pending;
+
+ /* Values changeable by the user. The valid values are
+ * in the range 1 to the "*_max_pending" counterpart above.
+ */
+ __u32 rx_pending;
+ __u32 rx_mini_pending;
+ __u32 rx_jumbo_pending;
+ __u32 tx_pending;
+};
+
+/* for configuring link flow control parameters */
+struct ethtool_pauseparam {
+ __u32 cmd; /* ETHTOOL_{G,S}PAUSEPARAM */
+
+ /* If the link is being auto-negotiated (via ethtool_cmd.autoneg
+ * being true) the user may set 'autonet' here non-zero to have the
+ * pause parameters be auto-negotiated too. In such a case, the
+ * {rx,tx}_pause values below determine what capabilities are
+ * advertised.
+ *
+ * If 'autoneg' is zero or the link is not being auto-negotiated,
+ * then {rx,tx}_pause force the driver to use/not-use pause
+ * flow control.
+ */
+ __u32 autoneg;
+ __u32 rx_pause;
+ __u32 tx_pause;
+};
+
+#define ETH_GSTRING_LEN 32
+enum ethtool_stringset {
+ ETH_SS_TEST = 0,
+ ETH_SS_STATS,
+ ETH_SS_PRIV_FLAGS,
+ ETH_SS_NTUPLE_FILTERS,
+ ETH_SS_FEATURES,
+};
+
+/* for passing string sets for data tagging */
+struct ethtool_gstrings {
+ __u32 cmd; /* ETHTOOL_GSTRINGS */
+ __u32 string_set; /* string set id e.c. ETH_SS_TEST, etc*/
+ __u32 len; /* number of strings in the string set */
+ __u8 data[0];
+};
+
+struct ethtool_sset_info {
+ __u32 cmd; /* ETHTOOL_GSSET_INFO */
+ __u32 reserved;
+ __u64 sset_mask; /* input: each bit selects an sset to query */
+ /* output: each bit a returned sset */
+ __u32 data[0]; /* ETH_SS_xxx count, in order, based on bits
+ in sset_mask. One bit implies one
+ __u32, two bits implies two
+ __u32's, etc. */
+};
+
+enum ethtool_test_flags {
+ ETH_TEST_FL_OFFLINE = (1 << 0), /* online / offline */
+ ETH_TEST_FL_FAILED = (1 << 1), /* test passed / failed */
+};
+
+/* for requesting NIC test and getting results*/
+struct ethtool_test {
+ __u32 cmd; /* ETHTOOL_TEST */
+ __u32 flags; /* ETH_TEST_FL_xxx */
+ __u32 reserved;
+ __u32 len; /* result length, in number of u64 elements */
+ __u64 data[0];
+};
+
+/* for dumping NIC-specific statistics */
+struct ethtool_stats {
+ __u32 cmd; /* ETHTOOL_GSTATS */
+ __u32 n_stats; /* number of u64's being returned */
+ __u64 data[0];
+};
+
+struct ethtool_perm_addr {
+ __u32 cmd; /* ETHTOOL_GPERMADDR */
+ __u32 size;
+ __u8 data[0];
+};
+
+/* boolean flags controlling per-interface behavior characteristics.
+ * When reading, the flag indicates whether or not a certain behavior
+ * is enabled/present. When writing, the flag indicates whether
+ * or not the driver should turn on (set) or off (clear) a behavior.
+ *
+ * Some behaviors may read-only (unconditionally absent or present).
+ * If such is the case, return EINVAL in the set-flags operation if the
+ * flag differs from the read-only value.
+ */
+enum ethtool_flags {
+ ETH_FLAG_TXVLAN = (1 << 7), /* TX VLAN offload enabled */
+ ETH_FLAG_RXVLAN = (1 << 8), /* RX VLAN offload enabled */
+ ETH_FLAG_LRO = (1 << 15), /* LRO is enabled */
+ ETH_FLAG_NTUPLE = (1 << 27), /* N-tuple filters enabled */
+ ETH_FLAG_RXHASH = (1 << 28),
+};
+
+/* The following structures are for supporting RX network flow
+ * classification and RX n-tuple configuration. Note, all multibyte
+ * fields, e.g., ip4src, ip4dst, psrc, pdst, spi, etc. are expected to
+ * be in network byte order.
+ */
+
+/**
+ * struct ethtool_tcpip4_spec - flow specification for TCP/IPv4 etc.
+ * @ip4src: Source host
+ * @ip4dst: Destination host
+ * @psrc: Source port
+ * @pdst: Destination port
+ * @tos: Type-of-service
+ *
+ * This can be used to specify a TCP/IPv4, UDP/IPv4 or SCTP/IPv4 flow.
+ */
+struct ethtool_tcpip4_spec {
+ __be32 ip4src;
+ __be32 ip4dst;
+ __be16 psrc;
+ __be16 pdst;
+ __u8 tos;
+};
+
+/**
+ * struct ethtool_ah_espip4_spec - flow specification for IPsec/IPv4
+ * @ip4src: Source host
+ * @ip4dst: Destination host
+ * @spi: Security parameters index
+ * @tos: Type-of-service
+ *
+ * This can be used to specify an IPsec transport or tunnel over IPv4.
+ */
+struct ethtool_ah_espip4_spec {
+ __be32 ip4src;
+ __be32 ip4dst;
+ __be32 spi;
+ __u8 tos;
+};
+
+#define ETH_RX_NFC_IP4 1
+
+/**
+ * struct ethtool_usrip4_spec - general flow specification for IPv4
+ * @ip4src: Source host
+ * @ip4dst: Destination host
+ * @l4_4_bytes: First 4 bytes of transport (layer 4) header
+ * @tos: Type-of-service
+ * @ip_ver: Value must be %ETH_RX_NFC_IP4; mask must be 0
+ * @proto: Transport protocol number; mask must be 0
+ */
+struct ethtool_usrip4_spec {
+ __be32 ip4src;
+ __be32 ip4dst;
+ __be32 l4_4_bytes;
+ __u8 tos;
+ __u8 ip_ver;
+ __u8 proto;
+};
+
+
+/**
+ * struct ethtool_rxfh_indir - command to get or set RX flow hash indirection
+ * @cmd: Specific command number - %ETHTOOL_GRXFHINDIR or %ETHTOOL_SRXFHINDIR
+ * @size: On entry, the array size of the user buffer. On return from
+ * %ETHTOOL_GRXFHINDIR, the array size of the hardware indirection table.
+ * @ring_index: RX ring/queue index for each hash value
+ */
+struct ethtool_rxfh_indir {
+ __u32 cmd;
+ __u32 size;
+ __u32 ring_index[0];
+};
+
+#define ETHTOOL_FLASH_MAX_FILENAME 128
+enum ethtool_flash_op_type {
+ ETHTOOL_FLASH_ALL_REGIONS = 0,
+};
+
+/* for passing firmware flashing related parameters */
+struct ethtool_flash {
+ __u32 cmd;
+ __u32 region;
+ char data[ETHTOOL_FLASH_MAX_FILENAME];
+};
+
+/* for returning and changing feature sets */
+
+/**
+ * struct ethtool_get_features_block - block with state of 32 features
+ * @available: mask of changeable features
+ * @requested: mask of features requested to be enabled if possible
+ * @active: mask of currently enabled features
+ * @never_changed: mask of features not changeable for any device
+ */
+struct ethtool_get_features_block {
+ __u32 available;
+ __u32 requested;
+ __u32 active;
+ __u32 never_changed;
+};
+
+/**
+ * struct ethtool_gfeatures - command to get state of device's features
+ * @cmd: command number = %ETHTOOL_GFEATURES
+ * @size: in: number of elements in the features[] array;
+ * out: number of elements in features[] needed to hold all features
+ * @features: state of features
+ */
+struct ethtool_gfeatures {
+ __u32 cmd;
+ __u32 size;
+ struct ethtool_get_features_block features[0];
+};
+
+/**
+ * struct ethtool_set_features_block - block with request for 32 features
+ * @valid: mask of features to be changed
+ * @requested: values of features to be changed
+ */
+struct ethtool_set_features_block {
+ __u32 valid;
+ __u32 requested;
+};
+
+/**
+ * struct ethtool_sfeatures - command to request change in device's features
+ * @cmd: command number = %ETHTOOL_SFEATURES
+ * @size: array size of the features[] array
+ * @features: feature change masks
+ */
+struct ethtool_sfeatures {
+ __u32 cmd;
+ __u32 size;
+ struct ethtool_set_features_block features[0];
+};
+
+/*
+ * %ETHTOOL_SFEATURES changes features present in features[].valid to the
+ * values of corresponding bits in features[].requested. Bits in .requested
+ * not set in .valid or not changeable are ignored.
+ *
+ * Returns %EINVAL when .valid contains undefined or never-changable bits
+ * or size is not equal to required number of features words (32-bit blocks).
+ * Returns >= 0 if request was completed; bits set in the value mean:
+ * %ETHTOOL_F_UNSUPPORTED - there were bits set in .valid that are not
+ * changeable (not present in %ETHTOOL_GFEATURES' features[].available)
+ * those bits were ignored.
+ * %ETHTOOL_F_WISH - some or all changes requested were recorded but the
+ * resulting state of bits masked by .valid is not equal to .requested.
+ * Probably there are other device-specific constraints on some features
+ * in the set. When %ETHTOOL_F_UNSUPPORTED is set, .valid is considered
+ * here as though ignored bits were cleared.
+ * %ETHTOOL_F_COMPAT - some or all changes requested were made by calling
+ * compatibility functions. Requested offload state cannot be properly
+ * managed by kernel.
+ *
+ * Meaning of bits in the masks are obtained by %ETHTOOL_GSSET_INFO (number of
+ * bits in the arrays - always multiple of 32) and %ETHTOOL_GSTRINGS commands
+ * for ETH_SS_FEATURES string set. First entry in the table corresponds to least
+ * significant bit in features[0] fields. Empty strings mark undefined features.
+ */
+enum ethtool_sfeatures_retval_bits {
+ ETHTOOL_F_UNSUPPORTED__BIT,
+ ETHTOOL_F_WISH__BIT,
+ ETHTOOL_F_COMPAT__BIT,
+};
+
+#define ETHTOOL_F_UNSUPPORTED (1 << ETHTOOL_F_UNSUPPORTED__BIT)
+#define ETHTOOL_F_WISH (1 << ETHTOOL_F_WISH__BIT)
+#define ETHTOOL_F_COMPAT (1 << ETHTOOL_F_COMPAT__BIT)
+
+/* CMDs currently supported */
+#define ETHTOOL_GSET 0x00000001 /* Get settings. */
+#define ETHTOOL_SSET 0x00000002 /* Set settings. */
+#define ETHTOOL_GDRVINFO 0x00000003 /* Get driver info. */
+#define ETHTOOL_GREGS 0x00000004 /* Get NIC registers. */
+#define ETHTOOL_GWOL 0x00000005 /* Get wake-on-lan options. */
+#define ETHTOOL_SWOL 0x00000006 /* Set wake-on-lan options. */
+#define ETHTOOL_GMSGLVL 0x00000007 /* Get driver message level */
+#define ETHTOOL_SMSGLVL 0x00000008 /* Set driver msg level. */
+#define ETHTOOL_NWAY_RST 0x00000009 /* Restart autonegotiation. */
+/* Get link status for host, i.e. whether the interface *and* the
+ * physical port (if there is one) are up (ethtool_value). */
+#define ETHTOOL_GLINK 0x0000000a
+#define ETHTOOL_GEEPROM 0x0000000b /* Get EEPROM data */
+#define ETHTOOL_SEEPROM 0x0000000c /* Set EEPROM data. */
+#define ETHTOOL_GCOALESCE 0x0000000e /* Get coalesce config */
+#define ETHTOOL_SCOALESCE 0x0000000f /* Set coalesce config. */
+#define ETHTOOL_GRINGPARAM 0x00000010 /* Get ring parameters */
+#define ETHTOOL_SRINGPARAM 0x00000011 /* Set ring parameters. */
+#define ETHTOOL_GPAUSEPARAM 0x00000012 /* Get pause parameters */
+#define ETHTOOL_SPAUSEPARAM 0x00000013 /* Set pause parameters. */
+#define ETHTOOL_GRXCSUM 0x00000014 /* Get RX hw csum enable (ethtool_value) */
+#define ETHTOOL_SRXCSUM 0x00000015 /* Set RX hw csum enable (ethtool_value) */
+#define ETHTOOL_GTXCSUM 0x00000016 /* Get TX hw csum enable (ethtool_value) */
+#define ETHTOOL_STXCSUM 0x00000017 /* Set TX hw csum enable (ethtool_value) */
+#define ETHTOOL_GSG 0x00000018 /* Get scatter-gather enable
+ * (ethtool_value) */
+#define ETHTOOL_SSG 0x00000019 /* Set scatter-gather enable
+ * (ethtool_value). */
+#define ETHTOOL_TEST 0x0000001a /* execute NIC self-test. */
+#define ETHTOOL_GSTRINGS 0x0000001b /* get specified string set */
+#define ETHTOOL_PHYS_ID 0x0000001c /* identify the NIC */
+#define ETHTOOL_GSTATS 0x0000001d /* get NIC-specific statistics */
+#define ETHTOOL_GTSO 0x0000001e /* Get TSO enable (ethtool_value) */
+#define ETHTOOL_STSO 0x0000001f /* Set TSO enable (ethtool_value) */
+#define ETHTOOL_GPERMADDR 0x00000020 /* Get permanent hardware address */
+#define ETHTOOL_GUFO 0x00000021 /* Get UFO enable (ethtool_value) */
+#define ETHTOOL_SUFO 0x00000022 /* Set UFO enable (ethtool_value) */
+#define ETHTOOL_GGSO 0x00000023 /* Get GSO enable (ethtool_value) */
+#define ETHTOOL_SGSO 0x00000024 /* Set GSO enable (ethtool_value) */
+#define ETHTOOL_GFLAGS 0x00000025 /* Get flags bitmap(ethtool_value) */
+#define ETHTOOL_SFLAGS 0x00000026 /* Set flags bitmap(ethtool_value) */
+#define ETHTOOL_GPFLAGS 0x00000027 /* Get driver-private flags bitmap */
+#define ETHTOOL_SPFLAGS 0x00000028 /* Set driver-private flags bitmap */
+
+#define ETHTOOL_GRXFH 0x00000029 /* Get RX flow hash configuration */
+#define ETHTOOL_SRXFH 0x0000002a /* Set RX flow hash configuration */
+#define ETHTOOL_GGRO 0x0000002b /* Get GRO enable (ethtool_value) */
+#define ETHTOOL_SGRO 0x0000002c /* Set GRO enable (ethtool_value) */
+#define ETHTOOL_GRXRINGS 0x0000002d /* Get RX rings available for LB */
+#define ETHTOOL_GRXCLSRLCNT 0x0000002e /* Get RX class rule count */
+#define ETHTOOL_GRXCLSRULE 0x0000002f /* Get RX classification rule */
+#define ETHTOOL_GRXCLSRLALL 0x00000030 /* Get all RX classification rule */
+#define ETHTOOL_SRXCLSRLDEL 0x00000031 /* Delete RX classification rule */
+#define ETHTOOL_SRXCLSRLINS 0x00000032 /* Insert RX classification rule */
+#define ETHTOOL_FLASHDEV 0x00000033 /* Flash firmware to device */
+#define ETHTOOL_RESET 0x00000034 /* Reset hardware */
+#define ETHTOOL_SRXNTUPLE 0x00000035 /* Add an n-tuple filter to device */
+#define ETHTOOL_GRXNTUPLE 0x00000036 /* Get n-tuple filters from device */
+#define ETHTOOL_GSSET_INFO 0x00000037 /* Get string set info */
+#define ETHTOOL_GRXFHINDIR 0x00000038 /* Get RX flow hash indir'n table */
+#define ETHTOOL_SRXFHINDIR 0x00000039 /* Set RX flow hash indir'n table */
+
+#define ETHTOOL_GFEATURES 0x0000003a /* Get device offload settings */
+#define ETHTOOL_SFEATURES 0x0000003b /* Change device offload settings */
+
+/* compatibility with older code */
+#define SPARC_ETH_GSET ETHTOOL_GSET
+#define SPARC_ETH_SSET ETHTOOL_SSET
+
+/* Indicates what features are supported by the interface. */
+#define SUPPORTED_10baseT_Half (1 << 0)
+#define SUPPORTED_10baseT_Full (1 << 1)
+#define SUPPORTED_100baseT_Half (1 << 2)
+#define SUPPORTED_100baseT_Full (1 << 3)
+#define SUPPORTED_1000baseT_Half (1 << 4)
+#define SUPPORTED_1000baseT_Full (1 << 5)
+#define SUPPORTED_Autoneg (1 << 6)
+#define SUPPORTED_TP (1 << 7)
+#define SUPPORTED_AUI (1 << 8)
+#define SUPPORTED_MII (1 << 9)
+#define SUPPORTED_FIBRE (1 << 10)
+#define SUPPORTED_BNC (1 << 11)
+#define SUPPORTED_10000baseT_Full (1 << 12)
+#define SUPPORTED_Pause (1 << 13)
+#define SUPPORTED_Asym_Pause (1 << 14)
+#define SUPPORTED_2500baseX_Full (1 << 15)
+#define SUPPORTED_Backplane (1 << 16)
+#define SUPPORTED_1000baseKX_Full (1 << 17)
+#define SUPPORTED_10000baseKX4_Full (1 << 18)
+#define SUPPORTED_10000baseKR_Full (1 << 19)
+#define SUPPORTED_10000baseR_FEC (1 << 20)
+
+/* Indicates what features are advertised by the interface. */
+#define ADVERTISED_10baseT_Half (1 << 0)
+#define ADVERTISED_10baseT_Full (1 << 1)
+#define ADVERTISED_100baseT_Half (1 << 2)
+#define ADVERTISED_100baseT_Full (1 << 3)
+#define ADVERTISED_1000baseT_Half (1 << 4)
+#define ADVERTISED_1000baseT_Full (1 << 5)
+#define ADVERTISED_Autoneg (1 << 6)
+#define ADVERTISED_TP (1 << 7)
+#define ADVERTISED_AUI (1 << 8)
+#define ADVERTISED_MII (1 << 9)
+#define ADVERTISED_FIBRE (1 << 10)
+#define ADVERTISED_BNC (1 << 11)
+#define ADVERTISED_10000baseT_Full (1 << 12)
+#define ADVERTISED_Pause (1 << 13)
+#define ADVERTISED_Asym_Pause (1 << 14)
+#define ADVERTISED_2500baseX_Full (1 << 15)
+#define ADVERTISED_Backplane (1 << 16)
+#define ADVERTISED_1000baseKX_Full (1 << 17)
+#define ADVERTISED_10000baseKX4_Full (1 << 18)
+#define ADVERTISED_10000baseKR_Full (1 << 19)
+#define ADVERTISED_10000baseR_FEC (1 << 20)
+
+/* The following are all involved in forcing a particular link
+ * mode for the device for setting things. When getting the
+ * devices settings, these indicate the current mode and whether
+ * it was foced up into this mode or autonegotiated.
+ */
+
+/* The forced speed, 10Mb, 100Mb, gigabit, 2.5Gb, 10GbE. */
+#define SPEED_10 10
+#define SPEED_100 100
+#define SPEED_1000 1000
+#define SPEED_2500 2500
+#define SPEED_10000 10000
+
+/* Duplex, half or full. */
+#define DUPLEX_HALF 0x00
+#define DUPLEX_FULL 0x01
+
+/* Which connector port. */
+#define PORT_TP 0x00
+#define PORT_AUI 0x01
+#define PORT_MII 0x02
+#define PORT_FIBRE 0x03
+#define PORT_BNC 0x04
+#define PORT_DA 0x05
+#define PORT_NONE 0xef
+#define PORT_OTHER 0xff
+
+/* Which transceiver to use. */
+#define XCVR_INTERNAL 0x00
+#define XCVR_EXTERNAL 0x01
+#define XCVR_DUMMY1 0x02
+#define XCVR_DUMMY2 0x03
+#define XCVR_DUMMY3 0x04
+
+/* Enable or disable autonegotiation. If this is set to enable,
+ * the forced link modes above are completely ignored.
+ */
+#define AUTONEG_DISABLE 0x00
+#define AUTONEG_ENABLE 0x01
+
+/* Mode MDI or MDI-X */
+#define ETH_TP_MDI_INVALID 0x00
+#define ETH_TP_MDI 0x01
+#define ETH_TP_MDI_X 0x02
+
+/* Wake-On-Lan options. */
+#define WAKE_PHY (1 << 0)
+#define WAKE_UCAST (1 << 1)
+#define WAKE_MCAST (1 << 2)
+#define WAKE_BCAST (1 << 3)
+#define WAKE_ARP (1 << 4)
+#define WAKE_MAGIC (1 << 5)
+#define WAKE_MAGICSECURE (1 << 6) /* only meaningful if WAKE_MAGIC */
+
+/* L2-L4 network traffic flow types */
+#define TCP_V4_FLOW 0x01 /* hash or spec (tcp_ip4_spec) */
+#define UDP_V4_FLOW 0x02 /* hash or spec (udp_ip4_spec) */
+#define SCTP_V4_FLOW 0x03 /* hash or spec (sctp_ip4_spec) */
+#define AH_ESP_V4_FLOW 0x04 /* hash only */
+#define TCP_V6_FLOW 0x05 /* hash only */
+#define UDP_V6_FLOW 0x06 /* hash only */
+#define SCTP_V6_FLOW 0x07 /* hash only */
+#define AH_ESP_V6_FLOW 0x08 /* hash only */
+#define AH_V4_FLOW 0x09 /* hash or spec (ah_ip4_spec) */
+#define ESP_V4_FLOW 0x0a /* hash or spec (esp_ip4_spec) */
+#define AH_V6_FLOW 0x0b /* hash only */
+#define ESP_V6_FLOW 0x0c /* hash only */
+#define IP_USER_FLOW 0x0d /* spec only (usr_ip4_spec) */
+#define IPV4_FLOW 0x10 /* hash only */
+#define IPV6_FLOW 0x11 /* hash only */
+#define ETHER_FLOW 0x12 /* spec only (ether_spec) */
+
+/* L3-L4 network traffic flow hash options */
+#define RXH_L2DA (1 << 1)
+#define RXH_VLAN (1 << 2)
+#define RXH_L3_PROTO (1 << 3)
+#define RXH_IP_SRC (1 << 4)
+#define RXH_IP_DST (1 << 5)
+#define RXH_L4_B_0_1 (1 << 6) /* src port in case of TCP/UDP/SCTP */
+#define RXH_L4_B_2_3 (1 << 7) /* dst port in case of TCP/UDP/SCTP */
+#define RXH_DISCARD (1 << 31)
+
+#define RX_CLS_FLOW_DISC 0xffffffffffffffffULL
+
+/* Reset flags */
+/* The reset() operation must clear the flags for the components which
+ * were actually reset. On successful return, the flags indicate the
+ * components which were not reset, either because they do not exist
+ * in the hardware or because they cannot be reset independently. The
+ * driver must never reset any components that were not requested.
+ */
+enum ethtool_reset_flags {
+ /* These flags represent components dedicated to the interface
+ * the command is addressed to. Shift any flag left by
+ * ETH_RESET_SHARED_SHIFT to reset a shared component of the
+ * same type.
+ */
+ ETH_RESET_MGMT = 1 << 0, /* Management processor */
+ ETH_RESET_IRQ = 1 << 1, /* Interrupt requester */
+ ETH_RESET_DMA = 1 << 2, /* DMA engine */
+ ETH_RESET_FILTER = 1 << 3, /* Filtering/flow direction */
+ ETH_RESET_OFFLOAD = 1 << 4, /* Protocol offload */
+ ETH_RESET_MAC = 1 << 5, /* Media access controller */
+ ETH_RESET_PHY = 1 << 6, /* Transceiver/PHY */
+ ETH_RESET_RAM = 1 << 7, /* RAM shared between
+ * multiple components */
+
+ ETH_RESET_DEDICATED = 0x0000ffff, /* All components dedicated to
+ * this interface */
+ ETH_RESET_ALL = 0xffffffff, /* All components used by this
+ * interface, even if shared */
+};
+#define ETH_RESET_SHARED_SHIFT 16
+
+#endif /* _LINUX_ETHTOOL_H */
diff --git a/include/linux/mdio.h b/include/linux/mdio.h
new file mode 100644
index 0000000..022d772
--- /dev/null
+++ b/include/linux/mdio.h
@@ -0,0 +1,278 @@
+/*
+ * linux/mdio.h: definitions for MDIO (clause 45) transceivers
+ * Copyright 2006-2009 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#ifndef __LINUX_MDIO_H__
+#define __LINUX_MDIO_H__
+
+#include <linux/mii.h>
+
+/* MDIO Manageable Devices (MMDs). */
+#define MDIO_MMD_PMAPMD 1 /* Physical Medium Attachment/
+ * Physical Medium Dependent */
+#define MDIO_MMD_WIS 2 /* WAN Interface Sublayer */
+#define MDIO_MMD_PCS 3 /* Physical Coding Sublayer */
+#define MDIO_MMD_PHYXS 4 /* PHY Extender Sublayer */
+#define MDIO_MMD_DTEXS 5 /* DTE Extender Sublayer */
+#define MDIO_MMD_TC 6 /* Transmission Convergence */
+#define MDIO_MMD_AN 7 /* Auto-Negotiation */
+#define MDIO_MMD_C22EXT 29 /* Clause 22 extension */
+#define MDIO_MMD_VEND1 30 /* Vendor specific 1 */
+#define MDIO_MMD_VEND2 31 /* Vendor specific 2 */
+
+/* Generic MDIO registers. */
+#define MDIO_CTRL1 MII_BMCR
+#define MDIO_STAT1 MII_BMSR
+#define MDIO_DEVID1 MII_PHYSID1
+#define MDIO_DEVID2 MII_PHYSID2
+#define MDIO_SPEED 4 /* Speed ability */
+#define MDIO_DEVS1 5 /* Devices in package */
+#define MDIO_DEVS2 6
+#define MDIO_CTRL2 7 /* 10G control 2 */
+#define MDIO_STAT2 8 /* 10G status 2 */
+#define MDIO_PMA_TXDIS 9 /* 10G PMA/PMD transmit disable */
+#define MDIO_PMA_RXDET 10 /* 10G PMA/PMD receive signal detect */
+#define MDIO_PMA_EXTABLE 11 /* 10G PMA/PMD extended ability */
+#define MDIO_PKGID1 14 /* Package identifier */
+#define MDIO_PKGID2 15
+#define MDIO_AN_ADVERTISE 16 /* AN advertising (base page) */
+#define MDIO_AN_LPA 19 /* AN LP abilities (base page) */
+#define MDIO_PHYXS_LNSTAT 24 /* PHY XGXS lane state */
+
+/* Media-dependent registers. */
+#define MDIO_PMA_10GBT_SWAPPOL 130 /* 10GBASE-T pair swap & polarity */
+#define MDIO_PMA_10GBT_TXPWR 131 /* 10GBASE-T TX power control */
+#define MDIO_PMA_10GBT_SNR 133 /* 10GBASE-T SNR margin, lane A.
+ * Lanes B-D are numbered 134-136. */
+#define MDIO_PMA_10GBR_FECABLE 170 /* 10GBASE-R FEC ability */
+#define MDIO_PCS_10GBX_STAT1 24 /* 10GBASE-X PCS status 1 */
+#define MDIO_PCS_10GBRT_STAT1 32 /* 10GBASE-R/-T PCS status 1 */
+#define MDIO_PCS_10GBRT_STAT2 33 /* 10GBASE-R/-T PCS status 2 */
+#define MDIO_AN_10GBT_CTRL 32 /* 10GBASE-T auto-negotiation control */
+#define MDIO_AN_10GBT_STAT 33 /* 10GBASE-T auto-negotiation status */
+#define MDIO_AN_EEE_ADV 60 /* EEE advertisement */
+
+/* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */
+#define MDIO_PMA_LASI_RXCTRL 0x9000 /* RX_ALARM control */
+#define MDIO_PMA_LASI_TXCTRL 0x9001 /* TX_ALARM control */
+#define MDIO_PMA_LASI_CTRL 0x9002 /* LASI control */
+#define MDIO_PMA_LASI_RXSTAT 0x9003 /* RX_ALARM status */
+#define MDIO_PMA_LASI_TXSTAT 0x9004 /* TX_ALARM status */
+#define MDIO_PMA_LASI_STAT 0x9005 /* LASI status */
+
+/* Control register 1. */
+/* Enable extended speed selection */
+#define MDIO_CTRL1_SPEEDSELEXT (BMCR_SPEED1000 | BMCR_SPEED100)
+/* All speed selection bits */
+#define MDIO_CTRL1_SPEEDSEL (MDIO_CTRL1_SPEEDSELEXT | 0x003c)
+#define MDIO_CTRL1_FULLDPLX BMCR_FULLDPLX
+#define MDIO_CTRL1_LPOWER BMCR_PDOWN
+#define MDIO_CTRL1_RESET BMCR_RESET
+#define MDIO_PMA_CTRL1_LOOPBACK 0x0001
+#define MDIO_PMA_CTRL1_SPEED1000 BMCR_SPEED1000
+#define MDIO_PMA_CTRL1_SPEED100 BMCR_SPEED100
+#define MDIO_PCS_CTRL1_LOOPBACK BMCR_LOOPBACK
+#define MDIO_PHYXS_CTRL1_LOOPBACK BMCR_LOOPBACK
+#define MDIO_AN_CTRL1_RESTART BMCR_ANRESTART
+#define MDIO_AN_CTRL1_ENABLE BMCR_ANENABLE
+#define MDIO_AN_CTRL1_XNP 0x2000 /* Enable extended next page */
+
+/* 10 Gb/s */
+#define MDIO_CTRL1_SPEED10G (MDIO_CTRL1_SPEEDSELEXT | 0x00)
+/* 10PASS-TS/2BASE-TL */
+#define MDIO_CTRL1_SPEED10P2B (MDIO_CTRL1_SPEEDSELEXT | 0x04)
+
+/* Status register 1. */
+#define MDIO_STAT1_LPOWERABLE 0x0002 /* Low-power ability */
+#define MDIO_STAT1_LSTATUS BMSR_LSTATUS
+#define MDIO_STAT1_FAULT 0x0080 /* Fault */
+#define MDIO_AN_STAT1_LPABLE 0x0001 /* Link partner AN ability */
+#define MDIO_AN_STAT1_ABLE BMSR_ANEGCAPABLE
+#define MDIO_AN_STAT1_RFAULT BMSR_RFAULT
+#define MDIO_AN_STAT1_COMPLETE BMSR_ANEGCOMPLETE
+#define MDIO_AN_STAT1_PAGE 0x0040 /* Page received */
+#define MDIO_AN_STAT1_XNP 0x0080 /* Extended next page status */
+
+/* Speed register. */
+#define MDIO_SPEED_10G 0x0001 /* 10G capable */
+#define MDIO_PMA_SPEED_2B 0x0002 /* 2BASE-TL capable */
+#define MDIO_PMA_SPEED_10P 0x0004 /* 10PASS-TS capable */
+#define MDIO_PMA_SPEED_1000 0x0010 /* 1000M capable */
+#define MDIO_PMA_SPEED_100 0x0020 /* 100M capable */
+#define MDIO_PMA_SPEED_10 0x0040 /* 10M capable */
+#define MDIO_PCS_SPEED_10P2B 0x0002 /* 10PASS-TS/2BASE-TL capable */
+
+/* Device present registers. */
+#define MDIO_DEVS_PRESENT(devad) (1 << (devad))
+#define MDIO_DEVS_PMAPMD MDIO_DEVS_PRESENT(MDIO_MMD_PMAPMD)
+#define MDIO_DEVS_WIS MDIO_DEVS_PRESENT(MDIO_MMD_WIS)
+#define MDIO_DEVS_PCS MDIO_DEVS_PRESENT(MDIO_MMD_PCS)
+#define MDIO_DEVS_PHYXS MDIO_DEVS_PRESENT(MDIO_MMD_PHYXS)
+#define MDIO_DEVS_DTEXS MDIO_DEVS_PRESENT(MDIO_MMD_DTEXS)
+#define MDIO_DEVS_TC MDIO_DEVS_PRESENT(MDIO_MMD_TC)
+#define MDIO_DEVS_AN MDIO_DEVS_PRESENT(MDIO_MMD_AN)
+#define MDIO_DEVS_C22EXT MDIO_DEVS_PRESENT(MDIO_MMD_C22EXT)
+#define MDIO_DEVS_VEND1 MDIO_DEVS_PRESENT(MDIO_MMD_VEND1)
+#define MDIO_DEVS_VEND2 MDIO_DEVS_PRESENT(MDIO_MMD_VEND2)
+
+
+/* Control register 2. */
+#define MDIO_PMA_CTRL2_TYPE 0x000f /* PMA/PMD type selection */
+#define MDIO_PMA_CTRL2_10GBCX4 0x0000 /* 10GBASE-CX4 type */
+#define MDIO_PMA_CTRL2_10GBEW 0x0001 /* 10GBASE-EW type */
+#define MDIO_PMA_CTRL2_10GBLW 0x0002 /* 10GBASE-LW type */
+#define MDIO_PMA_CTRL2_10GBSW 0x0003 /* 10GBASE-SW type */
+#define MDIO_PMA_CTRL2_10GBLX4 0x0004 /* 10GBASE-LX4 type */
+#define MDIO_PMA_CTRL2_10GBER 0x0005 /* 10GBASE-ER type */
+#define MDIO_PMA_CTRL2_10GBLR 0x0006 /* 10GBASE-LR type */
+#define MDIO_PMA_CTRL2_10GBSR 0x0007 /* 10GBASE-SR type */
+#define MDIO_PMA_CTRL2_10GBLRM 0x0008 /* 10GBASE-LRM type */
+#define MDIO_PMA_CTRL2_10GBT 0x0009 /* 10GBASE-T type */
+#define MDIO_PMA_CTRL2_10GBKX4 0x000a /* 10GBASE-KX4 type */
+#define MDIO_PMA_CTRL2_10GBKR 0x000b /* 10GBASE-KR type */
+#define MDIO_PMA_CTRL2_1000BT 0x000c /* 1000BASE-T type */
+#define MDIO_PMA_CTRL2_1000BKX 0x000d /* 1000BASE-KX type */
+#define MDIO_PMA_CTRL2_100BTX 0x000e /* 100BASE-TX type */
+#define MDIO_PMA_CTRL2_10BT 0x000f /* 10BASE-T type */
+#define MDIO_PCS_CTRL2_TYPE 0x0003 /* PCS type selection */
+#define MDIO_PCS_CTRL2_10GBR 0x0000 /* 10GBASE-R type */
+#define MDIO_PCS_CTRL2_10GBX 0x0001 /* 10GBASE-X type */
+#define MDIO_PCS_CTRL2_10GBW 0x0002 /* 10GBASE-W type */
+#define MDIO_PCS_CTRL2_10GBT 0x0003 /* 10GBASE-T type */
+
+/* Status register 2. */
+#define MDIO_STAT2_RXFAULT 0x0400 /* Receive fault */
+#define MDIO_STAT2_TXFAULT 0x0800 /* Transmit fault */
+#define MDIO_STAT2_DEVPRST 0xc000 /* Device present */
+#define MDIO_STAT2_DEVPRST_VAL 0x8000 /* Device present value */
+#define MDIO_PMA_STAT2_LBABLE 0x0001 /* PMA loopback ability */
+#define MDIO_PMA_STAT2_10GBEW 0x0002 /* 10GBASE-EW ability */
+#define MDIO_PMA_STAT2_10GBLW 0x0004 /* 10GBASE-LW ability */
+#define MDIO_PMA_STAT2_10GBSW 0x0008 /* 10GBASE-SW ability */
+#define MDIO_PMA_STAT2_10GBLX4 0x0010 /* 10GBASE-LX4 ability */
+#define MDIO_PMA_STAT2_10GBER 0x0020 /* 10GBASE-ER ability */
+#define MDIO_PMA_STAT2_10GBLR 0x0040 /* 10GBASE-LR ability */
+#define MDIO_PMA_STAT2_10GBSR 0x0080 /* 10GBASE-SR ability */
+#define MDIO_PMD_STAT2_TXDISAB 0x0100 /* PMD TX disable ability */
+#define MDIO_PMA_STAT2_EXTABLE 0x0200 /* Extended abilities */
+#define MDIO_PMA_STAT2_RXFLTABLE 0x1000 /* Receive fault ability */
+#define MDIO_PMA_STAT2_TXFLTABLE 0x2000 /* Transmit fault ability */
+#define MDIO_PCS_STAT2_10GBR 0x0001 /* 10GBASE-R capable */
+#define MDIO_PCS_STAT2_10GBX 0x0002 /* 10GBASE-X capable */
+#define MDIO_PCS_STAT2_10GBW 0x0004 /* 10GBASE-W capable */
+#define MDIO_PCS_STAT2_RXFLTABLE 0x1000 /* Receive fault ability */
+#define MDIO_PCS_STAT2_TXFLTABLE 0x2000 /* Transmit fault ability */
+
+/* Transmit disable register. */
+#define MDIO_PMD_TXDIS_GLOBAL 0x0001 /* Global PMD TX disable */
+#define MDIO_PMD_TXDIS_0 0x0002 /* PMD TX disable 0 */
+#define MDIO_PMD_TXDIS_1 0x0004 /* PMD TX disable 1 */
+#define MDIO_PMD_TXDIS_2 0x0008 /* PMD TX disable 2 */
+#define MDIO_PMD_TXDIS_3 0x0010 /* PMD TX disable 3 */
+
+/* Receive signal detect register. */
+#define MDIO_PMD_RXDET_GLOBAL 0x0001 /* Global PMD RX signal detect */
+#define MDIO_PMD_RXDET_0 0x0002 /* PMD RX signal detect 0 */
+#define MDIO_PMD_RXDET_1 0x0004 /* PMD RX signal detect 1 */
+#define MDIO_PMD_RXDET_2 0x0008 /* PMD RX signal detect 2 */
+#define MDIO_PMD_RXDET_3 0x0010 /* PMD RX signal detect 3 */
+
+/* Extended abilities register. */
+#define MDIO_PMA_EXTABLE_10GCX4 0x0001 /* 10GBASE-CX4 ability */
+#define MDIO_PMA_EXTABLE_10GBLRM 0x0002 /* 10GBASE-LRM ability */
+#define MDIO_PMA_EXTABLE_10GBT 0x0004 /* 10GBASE-T ability */
+#define MDIO_PMA_EXTABLE_10GBKX4 0x0008 /* 10GBASE-KX4 ability */
+#define MDIO_PMA_EXTABLE_10GBKR 0x0010 /* 10GBASE-KR ability */
+#define MDIO_PMA_EXTABLE_1000BT 0x0020 /* 1000BASE-T ability */
+#define MDIO_PMA_EXTABLE_1000BKX 0x0040 /* 1000BASE-KX ability */
+#define MDIO_PMA_EXTABLE_100BTX 0x0080 /* 100BASE-TX ability */
+#define MDIO_PMA_EXTABLE_10BT 0x0100 /* 10BASE-T ability */
+
+/* PHY XGXS lane state register. */
+#define MDIO_PHYXS_LNSTAT_SYNC0 0x0001
+#define MDIO_PHYXS_LNSTAT_SYNC1 0x0002
+#define MDIO_PHYXS_LNSTAT_SYNC2 0x0004
+#define MDIO_PHYXS_LNSTAT_SYNC3 0x0008
+#define MDIO_PHYXS_LNSTAT_ALIGN 0x1000
+
+/* PMA 10GBASE-T pair swap & polarity */
+#define MDIO_PMA_10GBT_SWAPPOL_ABNX 0x0001 /* Pair A/B uncrossed */
+#define MDIO_PMA_10GBT_SWAPPOL_CDNX 0x0002 /* Pair C/D uncrossed */
+#define MDIO_PMA_10GBT_SWAPPOL_AREV 0x0100 /* Pair A polarity reversed */
+#define MDIO_PMA_10GBT_SWAPPOL_BREV 0x0200 /* Pair B polarity reversed */
+#define MDIO_PMA_10GBT_SWAPPOL_CREV 0x0400 /* Pair C polarity reversed */
+#define MDIO_PMA_10GBT_SWAPPOL_DREV 0x0800 /* Pair D polarity reversed */
+
+/* PMA 10GBASE-T TX power register. */
+#define MDIO_PMA_10GBT_TXPWR_SHORT 0x0001 /* Short-reach mode */
+
+/* PMA 10GBASE-T SNR registers. */
+/* Value is SNR margin in dB, clamped to range [-127, 127], plus 0x8000. */
+#define MDIO_PMA_10GBT_SNR_BIAS 0x8000
+#define MDIO_PMA_10GBT_SNR_MAX 127
+
+/* PMA 10GBASE-R FEC ability register. */
+#define MDIO_PMA_10GBR_FECABLE_ABLE 0x0001 /* FEC ability */
+#define MDIO_PMA_10GBR_FECABLE_ERRABLE 0x0002 /* FEC error indic. ability */
+
+/* PCS 10GBASE-R/-T status register 1. */
+#define MDIO_PCS_10GBRT_STAT1_BLKLK 0x0001 /* Block lock attained */
+
+/* PCS 10GBASE-R/-T status register 2. */
+#define MDIO_PCS_10GBRT_STAT2_ERR 0x00ff
+#define MDIO_PCS_10GBRT_STAT2_BER 0x3f00
+
+/* AN 10GBASE-T control register. */
+#define MDIO_AN_10GBT_CTRL_ADV10G 0x1000 /* Advertise 10GBASE-T */
+
+/* AN 10GBASE-T status register. */
+#define MDIO_AN_10GBT_STAT_LPTRR 0x0200 /* LP training reset req. */
+#define MDIO_AN_10GBT_STAT_LPLTABLE 0x0400 /* LP loop timing ability */
+#define MDIO_AN_10GBT_STAT_LP10G 0x0800 /* LP is 10GBT capable */
+#define MDIO_AN_10GBT_STAT_REMOK 0x1000 /* Remote OK */
+#define MDIO_AN_10GBT_STAT_LOCOK 0x2000 /* Local OK */
+#define MDIO_AN_10GBT_STAT_MS 0x4000 /* Master/slave config */
+#define MDIO_AN_10GBT_STAT_MSFLT 0x8000 /* Master/slave config fault */
+
+/* AN EEE Advertisement register. */
+#define MDIO_AN_EEE_ADV_100TX 0x0002 /* Advertise 100TX EEE cap */
+#define MDIO_AN_EEE_ADV_1000T 0x0004 /* Advertise 1000T EEE cap */
+
+/* LASI RX_ALARM control/status registers. */
+#define MDIO_PMA_LASI_RX_PHYXSLFLT 0x0001 /* PHY XS RX local fault */
+#define MDIO_PMA_LASI_RX_PCSLFLT 0x0008 /* PCS RX local fault */
+#define MDIO_PMA_LASI_RX_PMALFLT 0x0010 /* PMA/PMD RX local fault */
+#define MDIO_PMA_LASI_RX_OPTICPOWERFLT 0x0020 /* RX optical power fault */
+#define MDIO_PMA_LASI_RX_WISLFLT 0x0200 /* WIS local fault */
+
+/* LASI TX_ALARM control/status registers. */
+#define MDIO_PMA_LASI_TX_PHYXSLFLT 0x0001 /* PHY XS TX local fault */
+#define MDIO_PMA_LASI_TX_PCSLFLT 0x0008 /* PCS TX local fault */
+#define MDIO_PMA_LASI_TX_PMALFLT 0x0010 /* PMA/PMD TX local fault */
+#define MDIO_PMA_LASI_TX_LASERPOWERFLT 0x0080 /* Laser output power fault */
+#define MDIO_PMA_LASI_TX_LASERTEMPFLT 0x0100 /* Laser temperature fault */
+#define MDIO_PMA_LASI_TX_LASERBICURRFLT 0x0200 /* Laser bias current fault */
+
+/* LASI control/status registers. */
+#define MDIO_PMA_LASI_LSALARM 0x0001 /* LS_ALARM enable/status */
+#define MDIO_PMA_LASI_TXALARM 0x0002 /* TX_ALARM enable/status */
+#define MDIO_PMA_LASI_RXALARM 0x0004 /* RX_ALARM enable/status */
+
+/* Mapping between MDIO PRTAD/DEVAD and mii_ioctl_data::phy_id */
+
+#define MDIO_PHY_ID_C45 0x8000
+#define MDIO_PHY_ID_PRTAD 0x03e0
+#define MDIO_PHY_ID_DEVAD 0x001f
+#define MDIO_PHY_ID_C45_MASK \
+ (MDIO_PHY_ID_C45 | MDIO_PHY_ID_PRTAD | MDIO_PHY_ID_DEVAD)
+
+#define MDIO_PRTAD_NONE (-1)
+#define MDIO_DEVAD_NONE (-1)
+#define MDIO_EMULATE_C22 4
+
+#endif /* __LINUX_MDIO_H__ */
diff --git a/include/miiphy.h b/include/miiphy.h
index 42dc127..7e70cf8 100644
--- a/include/miiphy.h
+++ b/include/miiphy.h
@@ -34,35 +34,52 @@
#ifndef _miiphy_h_
#define _miiphy_h_
+#include <common.h>
#include <linux/mii.h>
+#include <linux/list.h>
#include <net.h>
+#include <phy.h>
-int miiphy_read (const char *devname, unsigned char addr, unsigned char reg,
+struct legacy_mii_dev {
+ int (*read)(const char *devname, unsigned char addr,
+ unsigned char reg, unsigned short *value);
+ int (*write)(const char *devname, unsigned char addr,
+ unsigned char reg, unsigned short value);
+};
+
+int miiphy_read(const char *devname, unsigned char addr, unsigned char reg,
unsigned short *value);
-int miiphy_write (const char *devname, unsigned char addr, unsigned char reg,
+int miiphy_write(const char *devname, unsigned char addr, unsigned char reg,
unsigned short value);
-int miiphy_info (const char *devname, unsigned char addr, unsigned int *oui,
+int miiphy_info(const char *devname, unsigned char addr, unsigned int *oui,
unsigned char *model, unsigned char *rev);
-int miiphy_reset (const char *devname, unsigned char addr);
-int miiphy_speed (const char *devname, unsigned char addr);
-int miiphy_duplex (const char *devname, unsigned char addr);
-int miiphy_is_1000base_x (const char *devname, unsigned char addr);
+int miiphy_reset(const char *devname, unsigned char addr);
+int miiphy_speed(const char *devname, unsigned char addr);
+int miiphy_duplex(const char *devname, unsigned char addr);
+int miiphy_is_1000base_x(const char *devname, unsigned char addr);
#ifdef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-int miiphy_link (const char *devname, unsigned char addr);
+int miiphy_link(const char *devname, unsigned char addr);
#endif
-void miiphy_init (void);
+void miiphy_init(void);
-void miiphy_register (const char *devname,
- int (*read) (const char *devname, unsigned char addr,
+void miiphy_register(const char *devname,
+ int (*read)(const char *devname, unsigned char addr,
unsigned char reg, unsigned short *value),
- int (*write) (const char *devname, unsigned char addr,
+ int (*write)(const char *devname, unsigned char addr,
unsigned char reg, unsigned short value));
-int miiphy_set_current_dev (const char *devname);
-const char *miiphy_get_current_dev (void);
+int miiphy_set_current_dev(const char *devname);
+const char *miiphy_get_current_dev(void);
+struct mii_dev *mdio_get_current_dev(void);
+struct mii_dev *miiphy_get_dev_by_name(const char *devname);
+struct phy_device *mdio_phydev_for_ethname(const char *devname);
+
+void miiphy_listdev(void);
-void miiphy_listdev (void);
+struct mii_dev *mdio_alloc(void);
+int mdio_register(struct mii_dev *bus);
+void mdio_list_devices(void);
#ifdef CONFIG_BITBANGMII
@@ -85,10 +102,10 @@ struct bb_miiphy_bus {
extern struct bb_miiphy_bus bb_miiphy_buses[];
extern int bb_miiphy_buses_num;
-void bb_miiphy_init (void);
-int bb_miiphy_read (const char *devname, unsigned char addr,
+void bb_miiphy_init(void);
+int bb_miiphy_read(const char *devname, unsigned char addr,
unsigned char reg, unsigned short *value);
-int bb_miiphy_write (const char *devname, unsigned char addr,
+int bb_miiphy_write(const char *devname, unsigned char addr,
unsigned char reg, unsigned short value);
#endif
diff --git a/include/phy.h b/include/phy.h
new file mode 100644
index 0000000..d5817bf
--- /dev/null
+++ b/include/phy.h
@@ -0,0 +1,229 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Andy Fleming <afleming@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * This file pretty much stolen from Linux's mii.h/ethtool.h/phy.h
+ */
+
+#ifndef _PHY_H
+#define _PHY_H
+
+#include <linux/list.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/mdio.h>
+
+#define PHY_MAX_ADDR 32
+
+#define PHY_BASIC_FEATURES (SUPPORTED_10baseT_Half | \
+ SUPPORTED_10baseT_Full | \
+ SUPPORTED_100baseT_Half | \
+ SUPPORTED_100baseT_Full | \
+ SUPPORTED_Autoneg | \
+ SUPPORTED_TP | \
+ SUPPORTED_MII)
+
+#define PHY_GBIT_FEATURES (PHY_BASIC_FEATURES | \
+ SUPPORTED_1000baseT_Half | \
+ SUPPORTED_1000baseT_Full)
+
+#define PHY_10G_FEATURES (PHY_GBIT_FEATURES | \
+ SUPPORTED_10000baseT_Full)
+
+#define PHY_ANEG_TIMEOUT 4000
+
+
+typedef enum {
+ PHY_INTERFACE_MODE_MII,
+ PHY_INTERFACE_MODE_GMII,
+ PHY_INTERFACE_MODE_SGMII,
+ PHY_INTERFACE_MODE_TBI,
+ PHY_INTERFACE_MODE_RMII,
+ PHY_INTERFACE_MODE_RGMII,
+ PHY_INTERFACE_MODE_RGMII_ID,
+ PHY_INTERFACE_MODE_RGMII_RXID,
+ PHY_INTERFACE_MODE_RGMII_TXID,
+ PHY_INTERFACE_MODE_RTBI,
+ PHY_INTERFACE_MODE_XGMII,
+ PHY_INTERFACE_MODE_NONE /* Must be last */
+} phy_interface_t;
+
+static const char *phy_interface_strings[] = {
+ [PHY_INTERFACE_MODE_MII] = "mii",
+ [PHY_INTERFACE_MODE_GMII] = "gmii",
+ [PHY_INTERFACE_MODE_SGMII] = "sgmii",
+ [PHY_INTERFACE_MODE_TBI] = "tbi",
+ [PHY_INTERFACE_MODE_RMII] = "rmii",
+ [PHY_INTERFACE_MODE_RGMII] = "rgmii",
+ [PHY_INTERFACE_MODE_RGMII_ID] = "rgmii-id",
+ [PHY_INTERFACE_MODE_RGMII_RXID] = "rgmii-rxid",
+ [PHY_INTERFACE_MODE_RGMII_TXID] = "rgmii-txid",
+ [PHY_INTERFACE_MODE_RTBI] = "rtbi",
+ [PHY_INTERFACE_MODE_XGMII] = "xgmii",
+ [PHY_INTERFACE_MODE_NONE] = "",
+};
+
+static inline const char *phy_string_for_interface(phy_interface_t i)
+{
+ /* Default to unknown */
+ if (i > PHY_INTERFACE_MODE_NONE)
+ i = PHY_INTERFACE_MODE_NONE;
+
+ return phy_interface_strings[i];
+}
+
+
+struct phy_device;
+
+#define MDIO_NAME_LEN 32
+
+struct mii_dev {
+ struct list_head link;
+ char name[MDIO_NAME_LEN];
+ void *priv;
+ int (*read)(struct mii_dev *bus, int addr, int devad, int reg);
+ int (*write)(struct mii_dev *bus, int addr, int devad, int reg,
+ u16 val);
+ int (*reset)(struct mii_dev *bus);
+ struct phy_device *phymap[PHY_MAX_ADDR];
+ u32 phy_mask;
+};
+
+/* struct phy_driver: a structure which defines PHY behavior
+ *
+ * uid will contain a number which represents the PHY. During
+ * startup, the driver will poll the PHY to find out what its
+ * UID--as defined by registers 2 and 3--is. The 32-bit result
+ * gotten from the PHY will be masked to
+ * discard any bits which may change based on revision numbers
+ * unimportant to functionality
+ *
+ */
+struct phy_driver {
+ char *name;
+ unsigned int uid;
+ unsigned int mask;
+ unsigned int mmds;
+
+ u32 features;
+
+ /* Called to do any driver startup necessities */
+ /* Will be called during phy_connect */
+ int (*probe)(struct phy_device *phydev);
+
+ /* Called to configure the PHY, and modify the controller
+ * based on the results. Should be called after phy_connect */
+ int (*config)(struct phy_device *phydev);
+
+ /* Called when starting up the controller */
+ int (*startup)(struct phy_device *phydev);
+
+ /* Called when bringing down the controller */
+ int (*shutdown)(struct phy_device *phydev);
+
+ struct list_head list;
+};
+
+struct phy_device {
+ /* Information about the PHY type */
+ /* And management functions */
+ struct mii_dev *bus;
+ struct phy_driver *drv;
+ void *priv;
+
+ struct eth_device *dev;
+
+ /* forced speed & duplex (no autoneg)
+ * partner speed & duplex & pause (autoneg)
+ */
+ int speed;
+ int duplex;
+
+ /* The most recently read link state */
+ int link;
+ int port;
+ phy_interface_t interface;
+
+ u32 advertising;
+ u32 supported;
+ u32 mmds;
+
+ int autoneg;
+ int addr;
+ int pause;
+ int asym_pause;
+ u32 phy_id;
+ u32 flags;
+};
+
+static inline int phy_read(struct phy_device *phydev, int devad, int regnum)
+{
+ struct mii_dev *bus = phydev->bus;
+
+ return bus->read(bus, phydev->addr, devad, regnum);
+}
+
+static inline int phy_write(struct phy_device *phydev, int devad, int regnum,
+ u16 val)
+{
+ struct mii_dev *bus = phydev->bus;
+
+ return bus->write(bus, phydev->addr, devad, regnum, val);
+}
+
+#ifdef CONFIG_PHYLIB_10G
+extern struct phy_driver gen10g_driver;
+
+/* For now, XGMII is the only 10G interface */
+static inline int is_10g_interface(phy_interface_t interface)
+{
+ return interface == PHY_INTERFACE_MODE_XGMII;
+}
+
+#endif
+
+int phy_init(void);
+int phy_reset(struct phy_device *phydev);
+struct phy_device *phy_connect(struct mii_dev *bus, int addr,
+ struct eth_device *dev,
+ phy_interface_t interface);
+int phy_startup(struct phy_device *phydev);
+int phy_config(struct phy_device *phydev);
+int phy_shutdown(struct phy_device *phydev);
+int phy_register(struct phy_driver *drv);
+int genphy_config_aneg(struct phy_device *phydev);
+int genphy_update_link(struct phy_device *phydev);
+int genphy_config(struct phy_device *phydev);
+int genphy_startup(struct phy_device *phydev);
+int genphy_shutdown(struct phy_device *phydev);
+int gen10g_config(struct phy_device *phydev);
+int gen10g_startup(struct phy_device *phydev);
+int gen10g_shutdown(struct phy_device *phydev);
+int gen10g_discover_mmds(struct phy_device *phydev);
+
+int phy_atheros_init(void);
+int phy_broadcom_init(void);
+int phy_davicom_init(void);
+int phy_lxt_init(void);
+int phy_marvell_init(void);
+int phy_micrel_init(void);
+int phy_natsemi_init(void);
+int phy_realtek_init(void);
+int phy_teranetics_init(void);
+int phy_vitesse_init(void);
+#endif
diff --git a/include/tsec.h b/include/tsec.h
index d56ec2c..8ed30ac 100644
--- a/include/tsec.h
+++ b/include/tsec.h
@@ -7,7 +7,7 @@
* terms of the GNU Public License, Version 2, incorporated
* herein by reference.
*
- * Copyright 2004, 2007, 2009 Freescale Semiconductor, Inc.
+ * Copyright 2004, 2007, 2009, 2011 Freescale Semiconductor, Inc.
* (C) Copyright 2003, Motorola, Inc.
* maintained by Xianghua Xiao (x.xiao@motorola.com)
* author Andy Fleming
@@ -19,30 +19,36 @@
#include <net.h>
#include <config.h>
+#include <phy.h>
+#include <asm/fsl_enet.h>
#define TSEC_SIZE 0x01000
#define TSEC_MDIO_OFFSET 0x01000
+#define CONFIG_SYS_MDIO_BASE_ADDR (TSEC_BASE_ADDR + 0x520)
+
+#define DEFAULT_MII_NAME "FSL_MDIO"
+
#define STD_TSEC_INFO(num) \
{ \
.regs = (tsec_t *)(TSEC_BASE_ADDR + ((num - 1) * TSEC_SIZE)), \
- .miiregs = (tsec_mdio_t *)(MDIO_BASE_ADDR), \
- .miiregs_sgmii = (tsec_mdio_t *)(MDIO_BASE_ADDR \
+ .miiregs_sgmii = (struct tsec_mii_mng *)(CONFIG_SYS_MDIO_BASE_ADDR \
+ (num - 1) * TSEC_MDIO_OFFSET), \
.devname = CONFIG_TSEC##num##_NAME, \
.phyaddr = TSEC##num##_PHY_ADDR, \
- .flags = TSEC##num##_FLAGS \
+ .flags = TSEC##num##_FLAGS, \
+ .mii_devname = DEFAULT_MII_NAME \
}
#define SET_STD_TSEC_INFO(x, num) \
{ \
x.regs = (tsec_t *)(TSEC_BASE_ADDR + ((num - 1) * TSEC_SIZE)); \
- x.miiregs = (tsec_mdio_t *)(MDIO_BASE_ADDR); \
- x.miiregs_sgmii = (tsec_mdio_t *)(MDIO_BASE_ADDR \
+ x.miiregs_sgmii = (struct tsec_mii_mng *)(CONFIG_SYS_MDIO_BASE_ADDR \
+ (num - 1) * TSEC_MDIO_OFFSET); \
x.devname = CONFIG_TSEC##num##_NAME; \
x.phyaddr = TSEC##num##_PHY_ADDR; \
x.flags = TSEC##num##_FLAGS;\
+ x.mii_devname = DEFAULT_MII_NAME;\
}
#define MAC_ADDR_LEN 6
@@ -51,8 +57,6 @@
#define TSEC_TIMEOUT 1000
#define TOUT_LOOP 1000000
-#define PHY_AUTONEGOTIATE_TIMEOUT 5000 /* in ms */
-
/* TBI register addresses */
#define TBI_CR 0x00
#define TBI_SR 0x01
@@ -96,204 +100,14 @@
#define ECNTRL_INIT_SETTINGS 0x00001000
#define ECNTRL_TBI_MODE 0x00000020
+#define ECNTRL_REDUCED_MODE 0x00000010
#define ECNTRL_R100 0x00000008
+#define ECNTRL_REDUCED_MII_MODE 0x00000004
#define ECNTRL_SGMII_MODE 0x00000002
-#define miim_end -2
-#define miim_read -1
-
#ifndef CONFIG_SYS_TBIPA_VALUE
#define CONFIG_SYS_TBIPA_VALUE 0x1f
#endif
-#define MIIMCFG_INIT_VALUE 0x00000003
-#define MIIMCFG_RESET 0x80000000
-
-#define MIIMIND_BUSY 0x00000001
-#define MIIMIND_NOTVALID 0x00000004
-
-#define MIIM_CONTROL 0x00
-#define MIIM_CONTROL_RESET 0x00009140
-#define MIIM_CONTROL_INIT 0x00001140
-#define MIIM_CONTROL_RESTART 0x00001340
-#define MIIM_ANEN 0x00001000
-
-#define MIIM_CR 0x00
-#define MIIM_CR_RST 0x00008000
-#define MIIM_CR_INIT 0x00001000
-
-#define MIIM_STATUS 0x1
-#define MIIM_STATUS_AN_DONE 0x00000020
-#define MIIM_STATUS_LINK 0x0004
-
-#define MIIM_PHYIR1 0x2
-#define MIIM_PHYIR2 0x3
-
-#define MIIM_ANAR 0x4
-#define MIIM_ANAR_INIT 0x1e1
-
-#define MIIM_TBI_ANLPBPA 0x5
-#define MIIM_TBI_ANLPBPA_HALF 0x00000040
-#define MIIM_TBI_ANLPBPA_FULL 0x00000020
-
-#define MIIM_TBI_ANEX 0x6
-#define MIIM_TBI_ANEX_NP 0x00000004
-#define MIIM_TBI_ANEX_PRX 0x00000002
-
-#define MIIM_GBIT_CONTROL 0x9
-#define MIIM_GBIT_CONTROL_INIT 0xe00
-
-#define MIIM_EXT_PAGE_ACCESS 0x1f
-
-/* Broadcom BCM54xx -- taken from linux sungem_phy */
-#define MIIM_BCM54xx_AUXCNTL 0x18
-#define MIIM_BCM54xx_AUXCNTL_ENCODE(val) ((val & 0x7) << 12)|(val & 0x7)
-#define MIIM_BCM54xx_AUXSTATUS 0x19
-#define MIIM_BCM54xx_AUXSTATUS_LINKMODE_MASK 0x0700
-#define MIIM_BCM54xx_AUXSTATUS_LINKMODE_SHIFT 8
-
-#define MIIM_BCM54XX_SHD 0x1c /* 0x1c shadow registers */
-#define MIIM_BCM54XX_SHD_WRITE 0x8000
-#define MIIM_BCM54XX_SHD_VAL(x) ((x & 0x1f) << 10)
-#define MIIM_BCM54XX_SHD_DATA(x) ((x & 0x3ff) << 0)
-#define MIIM_BCM54XX_SHD_WR_ENCODE(val, data) \
- (MIIM_BCM54XX_SHD_WRITE | MIIM_BCM54XX_SHD_VAL(val) | \
- MIIM_BCM54XX_SHD_DATA(data))
-
-#define MIIM_BCM54XX_EXP_DATA 0x15 /* Expansion register data */
-#define MIIM_BCM54XX_EXP_SEL 0x17 /* Expansion register select */
-#define MIIM_BCM54XX_EXP_SEL_SSD 0x0e00 /* Secondary SerDes select */
-#define MIIM_BCM54XX_EXP_SEL_ER 0x0f00 /* Expansion register select */
-
-/* Cicada Auxiliary Control/Status Register */
-#define MIIM_CIS8201_AUX_CONSTAT 0x1c
-#define MIIM_CIS8201_AUXCONSTAT_INIT 0x0004
-#define MIIM_CIS8201_AUXCONSTAT_DUPLEX 0x0020
-#define MIIM_CIS8201_AUXCONSTAT_SPEED 0x0018
-#define MIIM_CIS8201_AUXCONSTAT_GBIT 0x0010
-#define MIIM_CIS8201_AUXCONSTAT_100 0x0008
-
-/* Cicada Extended Control Register 1 */
-#define MIIM_CIS8201_EXT_CON1 0x17
-#define MIIM_CIS8201_EXTCON1_INIT 0x0000
-
-/* Cicada 8204 Extended PHY Control Register 1 */
-#define MIIM_CIS8204_EPHY_CON 0x17
-#define MIIM_CIS8204_EPHYCON_INIT 0x0006
-#define MIIM_CIS8204_EPHYCON_RGMII 0x1100
-
-/* Cicada 8204 Serial LED Control Register */
-#define MIIM_CIS8204_SLED_CON 0x1b
-#define MIIM_CIS8204_SLEDCON_INIT 0x1115
-
-#define MIIM_GBIT_CON 0x09
-#define MIIM_GBIT_CON_ADVERT 0x0e00
-
-/* Entry for Vitesse VSC8244 regs starts here */
-/* Vitesse VSC8244 Auxiliary Control/Status Register */
-#define MIIM_VSC8244_AUX_CONSTAT 0x1c
-#define MIIM_VSC8244_AUXCONSTAT_INIT 0x0000
-#define MIIM_VSC8244_AUXCONSTAT_DUPLEX 0x0020
-#define MIIM_VSC8244_AUXCONSTAT_SPEED 0x0018
-#define MIIM_VSC8244_AUXCONSTAT_GBIT 0x0010
-#define MIIM_VSC8244_AUXCONSTAT_100 0x0008
-#define MIIM_CONTROL_INIT_LOOPBACK 0x4000
-
-/* Vitesse VSC8244 Extended PHY Control Register 1 */
-#define MIIM_VSC8244_EPHY_CON 0x17
-#define MIIM_VSC8244_EPHYCON_INIT 0x0006
-
-/* Vitesse VSC8244 Serial LED Control Register */
-#define MIIM_VSC8244_LED_CON 0x1b
-#define MIIM_VSC8244_LEDCON_INIT 0xF011
-
-/* Entry for Vitesse VSC8601 regs starts here (Not complete) */
-/* Vitesse VSC8601 Extended PHY Control Register 1 */
-#define MIIM_VSC8601_EPHY_CON 0x17
-#define MIIM_VSC8601_EPHY_CON_INIT_SKEW 0x1120
-#define MIIM_VSC8601_SKEW_CTRL 0x1c
-
-/* 88E1011 PHY Status Register */
-#define MIIM_88E1011_PHY_STATUS 0x11
-#define MIIM_88E1011_PHYSTAT_SPEED 0xc000
-#define MIIM_88E1011_PHYSTAT_GBIT 0x8000
-#define MIIM_88E1011_PHYSTAT_100 0x4000
-#define MIIM_88E1011_PHYSTAT_DUPLEX 0x2000
-#define MIIM_88E1011_PHYSTAT_SPDDONE 0x0800
-#define MIIM_88E1011_PHYSTAT_LINK 0x0400
-
-#define MIIM_88E1011_PHY_SCR 0x10
-#define MIIM_88E1011_PHY_MDI_X_AUTO 0x0060
-
-/* 88E1111 PHY LED Control Register */
-#define MIIM_88E1111_PHY_LED_CONTROL 24
-#define MIIM_88E1111_PHY_LED_DIRECT 0x4100
-#define MIIM_88E1111_PHY_LED_COMBINE 0x411C
-
-/* 88E1121 PHY LED Control Register */
-#define MIIM_88E1121_PHY_LED_CTRL 16
-#define MIIM_88E1121_PHY_LED_PAGE 3
-#define MIIM_88E1121_PHY_LED_DEF 0x0030
-
-/* 88E1121 PHY IRQ Enable/Status Register */
-#define MIIM_88E1121_PHY_IRQ_EN 18
-#define MIIM_88E1121_PHY_IRQ_STATUS 19
-
-#define MIIM_88E1121_PHY_PAGE 22
-
-/* 88E1145 Extended PHY Specific Control Register */
-#define MIIM_88E1145_PHY_EXT_CR 20
-#define MIIM_M88E1145_RGMII_RX_DELAY 0x0080
-#define MIIM_M88E1145_RGMII_TX_DELAY 0x0002
-
-#define MIIM_88E1145_PHY_PAGE 29
-#define MIIM_88E1145_PHY_CAL_OV 30
-
-/* RTL8211B PHY Status Register */
-#define MIIM_RTL8211B_PHY_STATUS 0x11
-#define MIIM_RTL8211B_PHYSTAT_SPEED 0xc000
-#define MIIM_RTL8211B_PHYSTAT_GBIT 0x8000
-#define MIIM_RTL8211B_PHYSTAT_100 0x4000
-#define MIIM_RTL8211B_PHYSTAT_DUPLEX 0x2000
-#define MIIM_RTL8211B_PHYSTAT_SPDDONE 0x0800
-#define MIIM_RTL8211B_PHYSTAT_LINK 0x0400
-
-/* DM9161 Control register values */
-#define MIIM_DM9161_CR_STOP 0x0400
-#define MIIM_DM9161_CR_RSTAN 0x1200
-
-#define MIIM_DM9161_SCR 0x10
-#define MIIM_DM9161_SCR_INIT 0x0610
-
-/* DM9161 Specified Configuration and Status Register */
-#define MIIM_DM9161_SCSR 0x11
-#define MIIM_DM9161_SCSR_100F 0x8000
-#define MIIM_DM9161_SCSR_100H 0x4000
-#define MIIM_DM9161_SCSR_10F 0x2000
-#define MIIM_DM9161_SCSR_10H 0x1000
-
-/* DM9161 10BT Configuration/Status */
-#define MIIM_DM9161_10BTCSR 0x12
-#define MIIM_DM9161_10BTCSR_INIT 0x7800
-
-/* LXT971 Status 2 registers */
-#define MIIM_LXT971_SR2 0x11 /* Status Register 2 */
-#define MIIM_LXT971_SR2_SPEED_MASK 0x4200
-#define MIIM_LXT971_SR2_10HDX 0x0000 /* 10 Mbit half duplex selected */
-#define MIIM_LXT971_SR2_10FDX 0x0200 /* 10 Mbit full duplex selected */
-#define MIIM_LXT971_SR2_100HDX 0x4000 /* 100 Mbit half duplex selected */
-#define MIIM_LXT971_SR2_100FDX 0x4200 /* 100 Mbit full duplex selected */
-
-/* DP83865 Control register values */
-#define MIIM_DP83865_CR_INIT 0x9200
-
-/* DP83865 Link and Auto-Neg Status Register */
-#define MIIM_DP83865_LANR 0x11
-#define MIIM_DP83865_SPD_MASK 0x0018
-#define MIIM_DP83865_SPD_1000 0x0010
-#define MIIM_DP83865_SPD_100 0x0008
-#define MIIM_DP83865_DPX_FULL 0x0002
-
-#define MIIM_READ_COMMAND 0x00000001
#define MRBLR_INIT_SETTINGS PKTSIZE_ALIGN
@@ -467,22 +281,6 @@ typedef struct tsec_hash_regs
uint res2[24];
} tsec_hash_t;
-typedef struct tsec_mdio {
- uint res1[4];
- uint ieventm;
- uint imaskm;
- uint res2;
- uint emapm;
- uint res3[320];
- uint miimcfg; /* MII Management: Configuration */
- uint miimcom; /* MII Management: Command */
- uint miimadd; /* MII Management: Address */
- uint miimcon; /* MII Management: Control */
- uint miimstat; /* MII Management: Status */
- uint miimind; /* MII Management: Indicators */
- uint res4[690];
-} tsec_mdio_t;
-
typedef struct tsec
{
/* General Control and Status Registers (0x2_n000) */
@@ -578,79 +376,29 @@ typedef struct tsec
uint resc00[256];
} tsec_t;
-#define TSEC_GIGABIT (1)
+#define TSEC_GIGABIT (1 << 0)
-/* This flag currently only has
- * meaning if we're using the eTSEC */
+/* These flags currently only have meaning if we're using the eTSEC */
#define TSEC_REDUCED (1 << 1) /* MAC-PHY interface uses RGMII */
#define TSEC_SGMII (1 << 2) /* MAC-PHY interface uses SGMII */
-#define TSEC_FIBER (1 << 3) /* PHY uses fiber, eg 1000 Base-X */
struct tsec_private {
- volatile tsec_t *regs;
- volatile tsec_mdio_t *phyregs;
- volatile tsec_mdio_t *phyregs_sgmii;
- struct phy_info *phyinfo;
+ tsec_t *regs;
+ struct tsec_mii_mng *phyregs_sgmii;
+ struct phy_device *phydev;
+ phy_interface_t interface;
+ struct mii_dev *bus;
uint phyaddr;
+ char mii_devname[16];
u32 flags;
- uint link;
- uint duplexity;
- uint speed;
-};
-
-
-/*
- * struct phy_cmd: A command for reading or writing a PHY register
- *
- * mii_reg: The register to read or write
- *
- * mii_data: For writes, the value to put in the register.
- * A value of -1 indicates this is a read.
- *
- * funct: A function pointer which is invoked for each command.
- * For reads, this function will be passed the value read
- * from the PHY, and process it.
- * For writes, the result of this function will be written
- * to the PHY register
- */
-struct phy_cmd {
- uint mii_reg;
- uint mii_data;
- uint (*funct) (uint mii_reg, struct tsec_private * priv);
-};
-
-/* struct phy_info: a structure which defines attributes for a PHY
- *
- * id will contain a number which represents the PHY. During
- * startup, the driver will poll the PHY to find out what its
- * UID--as defined by registers 2 and 3--is. The 32-bit result
- * gotten from the PHY will be shifted right by "shift" bits to
- * discard any bits which may change based on revision numbers
- * unimportant to functionality
- *
- * The struct phy_cmd entries represent pointers to an arrays of
- * commands which tell the driver what to do to the PHY.
- */
-struct phy_info {
- uint id;
- char *name;
- uint shift;
- /* Called to configure the PHY, and modify the controller
- * based on the results */
- struct phy_cmd *config;
-
- /* Called when starting up the controller */
- struct phy_cmd *startup;
-
- /* Called when bringing down the controller */
- struct phy_cmd *shutdown;
};
struct tsec_info_struct {
tsec_t *regs;
- tsec_mdio_t *miiregs;
- tsec_mdio_t *miiregs_sgmii;
+ struct tsec_mii_mng *miiregs_sgmii;
char *devname;
+ char *mii_devname;
+ phy_interface_t interface;
unsigned int phyaddr;
u32 flags;
};
diff --git a/net/eth.c b/net/eth.c
index 3a7ff50..6523834 100644
--- a/net/eth.c
+++ b/net/eth.c
@@ -25,6 +25,7 @@
#include <command.h>
#include <net.h>
#include <miiphy.h>
+#include <phy.h>
void eth_parse_enetaddr(const char *addr, uchar *enetaddr)
{
@@ -217,6 +218,11 @@ int eth_initialize(bd_t *bis)
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
miiphy_init();
#endif
+
+#ifdef CONFIG_PHYLIB
+ phy_init();
+#endif
+
/*
* If board-specific initialization exists, call it.
* If not, call a CPU-specific one