summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--boards.cfg3
-rw-r--r--doc/README.mx28evk18
-rw-r--r--include/configs/mx28evk.h31
3 files changed, 50 insertions, 2 deletions
diff --git a/boards.cfg b/boards.cfg
index 199fcfa..7725a15 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -196,7 +196,8 @@ mx23_olinuxino arm arm926ejs mx23_olinuxino olimex
apx4devkit arm arm926ejs apx4devkit bluegiga mxs apx4devkit
mx23evk arm arm926ejs mx23evk freescale mxs mx23evk
m28evk arm arm926ejs m28evk denx mxs m28evk
-mx28evk arm arm926ejs mx28evk freescale mxs mx28evk
+mx28evk arm arm926ejs mx28evk freescale mxs mx28evk:ENV_IS_IN_MMC
+mx28evk_nand arm arm926ejs mx28evk freescale mxs mx28evk:ENV_IS_IN_NAND
sc_sps_1 arm arm926ejs sc_sps_1 schulercontrol mxs
nhk8815 arm arm926ejs nhk8815 st nomadik
nhk8815_onenand arm arm926ejs nhk8815 st nomadik nhk8815:BOOT_ONENAND
diff --git a/doc/README.mx28evk b/doc/README.mx28evk
index 2fc5069..76db474 100644
--- a/doc/README.mx28evk
+++ b/doc/README.mx28evk
@@ -23,6 +23,24 @@ To boot MX28EVK from an SD card, set the boot mode DIP switches as:
* VDD 5V: To the left (off)
* Hold Button: Down (off)
+
+Environment Storage
+-------------------
+
+There are two targets for mx28evk:
+
+"make mx28evk_config" - store enviroment variables into MMC
+
+or
+
+"make mx28evk_nand_config" - store enviroment variables into NAND flash
+
+Choose the target accordingly.
+
+Note: The mx28evk board does not come with a NAND flash populated from the
+factory. It comes with an empty slot (U23), which allows the insertion of a
+48-pin TSOP flash device.
+
Follow the instructions from doc/README.mx28_common to generate a bootable SD
card.
diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h
index 428fe86..d470b47 100644
--- a/include/configs/mx28evk.h
+++ b/include/configs/mx28evk.h
@@ -62,6 +62,7 @@
#define CONFIG_CMD_SPI
#define CONFIG_CMD_USB
#define CONFIG_CMD_BOOTZ
+#define CONFIG_CMD_NAND
/* Memory configurations */
#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */
@@ -115,7 +116,6 @@
#define CONFIG_APBH_DMA
/* MMC Driver */
-#define CONFIG_ENV_IS_IN_MMC
#ifdef CONFIG_ENV_IS_IN_MMC
#define CONFIG_ENV_OFFSET (256 * 1024)
#define CONFIG_ENV_SIZE (16 * 1024)
@@ -130,11 +130,40 @@
#endif
/* NAND Driver */
+#define CONFIG_ENV_SIZE (16 * 1024)
#ifdef CONFIG_CMD_NAND
#define CONFIG_NAND_MXS
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x60000000
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+
+/* Environment is in NAND */
+#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
+#define CONFIG_ENV_SECT_SIZE (128 * 1024)
+#define CONFIG_ENV_RANGE (512 * 1024)
+#ifndef CONFIG_ENV_OFFSET
+#define CONFIG_ENV_OFFSET 0x300000
+#endif
+#define CONFIG_ENV_OFFSET_REDUND \
+ (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
+
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_RBTREE
+#define CONFIG_LZO
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define MTDIDS_DEFAULT "nand0=gpmi-nand"
+#define MTDPARTS_DEFAULT \
+ "mtdparts=gpmi-nand:" \
+ "3m(bootloader)ro," \
+ "512k(environment)," \
+ "512k(redundant-environment)," \
+ "4m(kernel)," \
+ "128k(fdt)," \
+ "8m(ramdisk)," \
+ "-(filesystem)"
#endif
/* Ethernet on SOC (FEC) */