summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--include/asm-blackfin/config-pre.h3
-rw-r--r--include/asm-blackfin/io.h159
-rw-r--r--lib_blackfin/Makefile2
-rw-r--r--lib_blackfin/ins.S117
-rw-r--r--lib_blackfin/outs.S60
5 files changed, 298 insertions, 43 deletions
diff --git a/include/asm-blackfin/config-pre.h b/include/asm-blackfin/config-pre.h
index b1d3a94..1170a2a 100644
--- a/include/asm-blackfin/config-pre.h
+++ b/include/asm-blackfin/config-pre.h
@@ -71,4 +71,7 @@ static inline const char *get_bfin_boot_mode(int bfin_boot)
# define BFIN_BOOT_SPI_SSEL 1
#endif
+/* We rarely use interrupts, so favor throughput over latency */
+#define CONFIG_BFIN_INS_LOWOVERHEAD
+
#endif
diff --git a/include/asm-blackfin/io.h b/include/asm-blackfin/io.h
index 9cb07d4..75244a0 100644
--- a/include/asm-blackfin/io.h
+++ b/include/asm-blackfin/io.h
@@ -1,25 +1,9 @@
/*
* U-boot - io.h IO routines
*
- * Copyright (c) 2005-2007 Analog Devices Inc.
+ * Copyright 2004-2009 Analog Devices Inc.
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#ifndef _BLACKFIN_IO_H
@@ -29,6 +13,8 @@
#include <asm/blackfin.h>
+#define __iomem
+
static inline void sync(void)
{
SSYNC();
@@ -70,70 +56,154 @@ static inline phys_addr_t virt_to_phys(void * vaddr)
*
* readX/writeX() are used to access memory mapped devices. On some
* architectures the memory mapped IO stuff needs to be accessed
- * differently. On the m68k architecture, we just read/write the
+ * differently. On the bfin architecture, we just read/write the
* memory location directly.
*/
-
#ifndef __ASSEMBLY__
-static inline unsigned char readb(const volatile void *addr)
+static inline unsigned char readb(const volatile void __iomem *addr)
{
unsigned int val;
int tmp;
- __asm__ __volatile__ ("cli %1;\n\t"
- "NOP; NOP; SSYNC;\n\t"
- "%0 = b [%2] (z);\n\t"
- "sti %1;\n\t"
- : "=d"(val), "=d"(tmp): "a"(addr));
+ __asm__ __volatile__ (
+ "cli %1;"
+ "NOP; NOP; SSYNC;"
+ "%0 = b [%2] (z);"
+ "sti %1;"
+ : "=d"(val), "=d"(tmp)
+ : "a"(addr)
+ );
return (unsigned char) val;
}
-static inline unsigned short readw(const volatile void *addr)
+static inline unsigned short readw(const volatile void __iomem *addr)
{
unsigned int val;
int tmp;
- __asm__ __volatile__ ("cli %1;\n\t"
- "NOP; NOP; SSYNC;\n\t"
- "%0 = w [%2] (z);\n\t"
- "sti %1;\n\t"
- : "=d"(val), "=d"(tmp): "a"(addr));
+ __asm__ __volatile__ (
+ "cli %1;"
+ "NOP; NOP; SSYNC;"
+ "%0 = w [%2] (z);"
+ "sti %1;"
+ : "=d"(val), "=d"(tmp)
+ : "a"(addr)
+ );
return (unsigned short) val;
}
-static inline unsigned int readl(const volatile void *addr)
+static inline unsigned int readl(const volatile void __iomem *addr)
{
unsigned int val;
int tmp;
- __asm__ __volatile__ ("cli %1;\n\t"
- "NOP; NOP; SSYNC;\n\t"
- "%0 = [%2];\n\t"
- "sti %1;\n\t"
- : "=d"(val), "=d"(tmp): "a"(addr));
+ __asm__ __volatile__ (
+ "cli %1;"
+ "NOP; NOP; SSYNC;"
+ "%0 = [%2];"
+ "sti %1;"
+ : "=d"(val), "=d"(tmp)
+ : "a"(addr)
+ );
+
return val;
}
-#define __raw_readb readb
-#define __raw_readw readw
-#define __raw_readl readl
-
#endif /* __ASSEMBLY__ */
#define writeb(b, addr) (void)((*(volatile unsigned char *) (addr)) = (b))
#define writew(b, addr) (void)((*(volatile unsigned short *) (addr)) = (b))
#define writel(b, addr) (void)((*(volatile unsigned int *) (addr)) = (b))
+
+#define __raw_readb readb
+#define __raw_readw readw
+#define __raw_readl readl
#define __raw_writeb writeb
#define __raw_writew writew
#define __raw_writel writel
-
#define memset_io(a, b, c) memset((void *)(a), (b), (c))
#define memcpy_fromio(a, b, c) memcpy((a), (void *)(b), (c))
#define memcpy_toio(a, b, c) memcpy((void *)(a), (b), (c))
+/* Convert "I/O port addresses" to actual addresses. i.e. ugly casts. */
+#define __io(port) ((void *)(unsigned long)(port))
+
+#define inb(port) readb(__io(port))
+#define inw(port) readw(__io(port))
+#define inl(port) readl(__io(port))
+#define outb(x, port) writeb(x, __io(port))
+#define outw(x, port) writew(x, __io(port))
+#define outl(x, port) writel(x, __io(port))
+
+#define inb_p(port) inb(__io(port))
+#define inw_p(port) inw(__io(port))
+#define inl_p(port) inl(__io(port))
+#define outb_p(x, port) outb(x, __io(port))
+#define outw_p(x, port) outw(x, __io(port))
+#define outl_p(x, port) outl(x, __io(port))
+
+#define ioread8_rep(a, d, c) readsb(a, d, c)
+#define ioread16_rep(a, d, c) readsw(a, d, c)
+#define ioread32_rep(a, d, c) readsl(a, d, c)
+#define iowrite8_rep(a, s, c) writesb(a, s, c)
+#define iowrite16_rep(a, s, c) writesw(a, s, c)
+#define iowrite32_rep(a, s, c) writesl(a, s, c)
+
+#define ioread8(x) readb(x)
+#define ioread16(x) readw(x)
+#define ioread32(x) readl(x)
+#define iowrite8(val, x) writeb(val, x)
+#define iowrite16(val, x) writew(val, x)
+#define iowrite32(val, x) writel(val, x)
+
+#define mmiowb() wmb()
+
+#ifndef __ASSEMBLY__
+
+extern void outsb(unsigned long port, const void *addr, unsigned long count);
+extern void outsw(unsigned long port, const void *addr, unsigned long count);
+extern void outsw_8(unsigned long port, const void *addr, unsigned long count);
+extern void outsl(unsigned long port, const void *addr, unsigned long count);
+
+extern void insb(unsigned long port, void *addr, unsigned long count);
+extern void insw(unsigned long port, void *addr, unsigned long count);
+extern void insw_8(unsigned long port, void *addr, unsigned long count);
+extern void insl(unsigned long port, void *addr, unsigned long count);
+extern void insl_16(unsigned long port, void *addr, unsigned long count);
+
+static inline void readsl(const void __iomem *addr, void *buf, int len)
+{
+ insl((unsigned long)addr, buf, len);
+}
+
+static inline void readsw(const void __iomem *addr, void *buf, int len)
+{
+ insw((unsigned long)addr, buf, len);
+}
+
+static inline void readsb(const void __iomem *addr, void *buf, int len)
+{
+ insb((unsigned long)addr, buf, len);
+}
+
+static inline void writesl(const void __iomem *addr, const void *buf, int len)
+{
+ outsl((unsigned long)addr, buf, len);
+}
+
+static inline void writesw(const void __iomem *addr, const void *buf, int len)
+{
+ outsw((unsigned long)addr, buf, len);
+}
+
+static inline void writesb(const void __iomem *addr, const void *buf, int len)
+{
+ outsb((unsigned long)addr, buf, len);
+}
+
#if defined(CONFIG_STAMP_CF) || defined(CONFIG_BFIN_IDE)
/* This hack for CF/IDE needs to be addressed at some point */
extern void cf_outsw(unsigned short *addr, unsigned short *sect_buf, int words);
@@ -151,4 +221,7 @@ extern void cf_outb(unsigned char val, volatile unsigned char *addr);
#endif
#endif
+
+#endif /* __KERNEL__ */
+
#endif
diff --git a/lib_blackfin/Makefile b/lib_blackfin/Makefile
index cbf47f0..eebb131 100644
--- a/lib_blackfin/Makefile
+++ b/lib_blackfin/Makefile
@@ -31,10 +31,12 @@ CFLAGS += -DBFIN_BOARD_NAME='"$(BOARD)"'
LIB = $(obj)lib$(ARCH).a
+SOBJS-y += ins.o
SOBJS-y += memcmp.o
SOBJS-y += memcpy.o
SOBJS-y += memmove.o
SOBJS-y += memset.o
+SOBJS-y += outs.o
COBJS-y += board.o
COBJS-y += boot.o
diff --git a/lib_blackfin/ins.S b/lib_blackfin/ins.S
new file mode 100644
index 0000000..4519596
--- /dev/null
+++ b/lib_blackfin/ins.S
@@ -0,0 +1,117 @@
+/*
+ * arch/blackfin/lib/ins.S - ins{bwl} using hardware loops
+ *
+ * Copyright 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2005 Bas Vermeulen, BuyWays BV <bas@buyways.nl>
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <asm/blackfin.h>
+
+.align 2
+
+#ifdef CONFIG_IPIPE
+# define DO_CLI \
+ [--sp] = rets; \
+ [--sp] = (P5:0); \
+ sp += -12; \
+ call ___ipipe_disable_root_irqs_hw; \
+ sp += 12; \
+ (P5:0) = [sp++];
+# define CLI_INNER_NOP
+#else
+# define DO_CLI cli R3;
+# define CLI_INNER_NOP nop; nop; nop;
+#endif
+
+#ifdef CONFIG_IPIPE
+# define DO_STI \
+ sp += -12; \
+ call ___ipipe_enable_root_irqs_hw; \
+ sp += 12; \
+2: rets = [sp++];
+#else
+# define DO_STI 2: sti R3;
+#endif
+
+#ifdef CONFIG_BFIN_INS_LOWOVERHEAD
+# define CLI_OUTER DO_CLI;
+# define STI_OUTER DO_STI;
+# define CLI_INNER 1:
+# if ANOMALY_05000416
+# define STI_INNER nop; 2: nop;
+# else
+# define STI_INNER 2:
+# endif
+#else
+# define CLI_OUTER
+# define STI_OUTER
+# define CLI_INNER 1: DO_CLI; CLI_INNER_NOP;
+# define STI_INNER DO_STI;
+#endif
+
+/*
+ * Reads on the Blackfin are speculative. In Blackfin terms, this means they
+ * can be interrupted at any time (even after they have been issued on to the
+ * external bus), and re-issued after the interrupt occurs.
+ *
+ * If a FIFO is sitting on the end of the read, it will see two reads,
+ * when the core only sees one. The FIFO receives the read which is cancelled,
+ * and not delivered to the core.
+ *
+ * To solve this, interrupts are turned off before reads occur to I/O space.
+ * There are 3 versions of all these functions
+ * - turns interrupts off every read (higher overhead, but lower latency)
+ * - turns interrupts off every loop (low overhead, but longer latency)
+ * - DMA version, which do not suffer from this issue. DMA versions have
+ * different name (prefixed by dma_ ), and are located in
+ * ../kernel/bfin_dma_5xx.c
+ * Using the dma related functions are recommended for transfering large
+ * buffers in/out of FIFOs.
+ */
+
+#define COMMON_INS(func, ops) \
+ENTRY(_ins##func) \
+ P0 = R0; /* P0 = port */ \
+ CLI_OUTER; /* 3 instructions before first read access */ \
+ P1 = R1; /* P1 = address */ \
+ P2 = R2; /* P2 = count */ \
+ SSYNC; \
+ \
+ LSETUP(1f, 2f) LC0 = P2; \
+ CLI_INNER; \
+ ops; \
+ STI_INNER; \
+ \
+ STI_OUTER; \
+ RTS; \
+ENDPROC(_ins##func)
+
+COMMON_INS(l, \
+ R0 = [P0]; \
+ [P1++] = R0; \
+)
+
+COMMON_INS(w, \
+ R0 = W[P0]; \
+ W[P1++] = R0; \
+)
+
+COMMON_INS(w_8, \
+ R0 = W[P0]; \
+ B[P1++] = R0; \
+ R0 = R0 >> 8; \
+ B[P1++] = R0; \
+)
+
+COMMON_INS(b, \
+ R0 = B[P0]; \
+ B[P1++] = R0; \
+)
+
+COMMON_INS(l_16, \
+ R0 = [P0]; \
+ W[P1++] = R0; \
+ R0 = R0 >> 16; \
+ W[P1++] = R0; \
+)
diff --git a/lib_blackfin/outs.S b/lib_blackfin/outs.S
new file mode 100644
index 0000000..90c6033
--- /dev/null
+++ b/lib_blackfin/outs.S
@@ -0,0 +1,60 @@
+/*
+ * Implementation of outs{bwl} for BlackFin processors using zero overhead loops.
+ *
+ * Copyright 2005-2009 Analog Devices Inc.
+ * 2005 BuyWays BV
+ * Bas Vermeulen <bas@buyways.nl>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <asm/linkage.h>
+
+.align 2
+
+ENTRY(_outsl)
+ P0 = R0; /* P0 = port */
+ P1 = R1; /* P1 = address */
+ P2 = R2; /* P2 = count */
+
+ LSETUP( .Llong_loop_s, .Llong_loop_e) LC0 = P2;
+.Llong_loop_s: R0 = [P1++];
+.Llong_loop_e: [P0] = R0;
+ RTS;
+ENDPROC(_outsl)
+
+ENTRY(_outsw)
+ P0 = R0; /* P0 = port */
+ P1 = R1; /* P1 = address */
+ P2 = R2; /* P2 = count */
+
+ LSETUP( .Lword_loop_s, .Lword_loop_e) LC0 = P2;
+.Lword_loop_s: R0 = W[P1++];
+.Lword_loop_e: W[P0] = R0;
+ RTS;
+ENDPROC(_outsw)
+
+ENTRY(_outsb)
+ P0 = R0; /* P0 = port */
+ P1 = R1; /* P1 = address */
+ P2 = R2; /* P2 = count */
+
+ LSETUP( .Lbyte_loop_s, .Lbyte_loop_e) LC0 = P2;
+.Lbyte_loop_s: R0 = B[P1++];
+.Lbyte_loop_e: B[P0] = R0;
+ RTS;
+ENDPROC(_outsb)
+
+ENTRY(_outsw_8)
+ P0 = R0; /* P0 = port */
+ P1 = R1; /* P1 = address */
+ P2 = R2; /* P2 = count */
+
+ LSETUP( .Lword8_loop_s, .Lword8_loop_e) LC0 = P2;
+.Lword8_loop_s: R1 = B[P1++];
+ R0 = B[P1++];
+ R0 = R0 << 8;
+ R0 = R0 + R1;
+.Lword8_loop_e: W[P0] = R0;
+ RTS;
+ENDPROC(_outsw_8)