diff options
| -rw-r--r-- | CHANGELOG | 147 | ||||
| -rw-r--r-- | Makefile | 2 |
2 files changed, 148 insertions, 1 deletions
@@ -1,3 +1,150 @@ +commit f9476902b789b0481b9df49af88d6ca94fb16fa0 +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Tue Dec 15 12:10:47 2009 -0600 + + mpc85xx, mpc86xx: Fix gd->cpu pointer after relocation + + The gd->cpu pointer is set to an address located in flash when the + probecpu() function is called while U-Boot is executing from flash. + This pointer needs to be updated to point to an address in RAM after + relocation has occurred otherwise Linux may not be able to boot due to + "fdt board" crashing if flash has been erased or changed. + + This bug was introduced in commit + a0e2066f392782730f0398095e583c87812d97f2. + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + Reported-by: Ed Swarthout <Ed.Swarthout@freescale.com> + Tested-by: Kumar Gala <galak@kernel.crashing.org> + Tested on MPC8527DS. + Tested by: Ed Swarthout <Ed.Swarthout@freescale.com> + +commit 3363a34b9eeda9783afcbbed5cdd738926d1f4bf +Author: Peter Tyser <ptyser@xes-inc.com> +Date: Sun Dec 13 17:58:34 2009 -0600 + + MVBLUE: Remove CONFIG_CMD_IRQ + + Neither the MVBLUE nor its underlying architecture implement the + do_irqinfo() function which is required when CONFIG_CMD_IRQ is defined. + This change fixes the following MVBLUE compiler error: + + -> ./MAKEALL MVBLUE + Configuring for MVBLUE board... + common/libcommon.a(cmd_irq.o):(.u_boot_cmd+0x24): undefined reference to `do_irqinfo' + make: *** [u-boot] Error 1 + + Signed-off-by: Peter Tyser <ptyser@xes-inc.com> + Acked-by: Andre Schwarz <andre.schwarz@matrix-vision.de> + +commit 18e8ad60ee87431c01cc2686985b60cc54f5dd3b +Author: Detlev Zundel <dzu@denx.de> +Date: Mon Dec 14 17:54:40 2009 +0100 + + imx27lite: Reenable MTD support on NOR flash. + + The support for this was silently dropped by a configuration + split during the merge of the imx27lite board support in commit + 864aa034f3a0e10ce710e8bbda171df3cab59414 (cmd_mtdparts: Move to common + handling of FLASH devices via MTD layer). + + Signed-off-by: Detlev Zundel <dzu@denx.de> + +commit f4cfe42758192d09f8375e384cc000aa70d97029 +Author: Stefan Roese <sr@denx.de> +Date: Wed Dec 9 09:01:43 2009 +0100 + + nand: Fix access to last block in NAND devices + + Currently, the last block of NAND devices can't be accessed. This patch + fixes this issue by correcting the boundary checking (off-by-one error). + + Signed-off-by: Stefan Roese <sr@denx.de> + Cc: Scott Wood <scottwood@freescale.com> + Cc: Wolfgang Denk <wd@denx.de> + +commit 3b887ca8ce72cc12129183538f6e828db13f4867 +Author: Peter Korsgaard <jacmet@sunsite.dk> +Date: Tue Dec 8 22:20:34 2009 +0100 + + mpc83xx: boot time regression, move LCRR setup back to cpu_init_f + + Commit c7190f02 (retain POR values of non-configured ACR, SPCR, SCCR, + and LCRR bitfields) moved the LCRR assignment to after relocation + to RAM because of the potential problem with changing the local bus + clock while executing from flash. + + This change unfortunately adversely affects the boot time, as running + all code up to cpu_init_r can cause significant slowdown. + + E.G. on a 8347 board a bootup time increase of ~600ms has been observed: + + 0.020 CPU: e300c1, MPC8347_PBGA_EA, Rev: 3.0 at 400 MHz, CSB: 266.667 MHz + 0.168 RS: 232 + 0.172 I2C: ready + 0.176 DRAM: 64 MB + 1.236 FLASH: 32 MB + + Versus: + + 0.016 CPU: e300c1, MPC8347_PBGA_EA, Rev: 3.0 at 400 MHz, CSB: 266.667 MHz + 0.092 RS: 232 + 0.092 I2C: ready + 0.096 DRAM: 64 MB + 0.644 FLASH: 32 MB + + So far no boards have needed the late LCRR setup, so simply revert it + for now - If it is needed at a later time, those boards can either do + their own final LCRR setup in board code (E.G. in board_early_init_r), + or we can introduce a CONFIG_SYS_LCRR_LATE config option to only do + the setup in cpu_init_r. + + Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> + Signed-off-by: Kim Phillips <kim.phillips@freescale.com> + +commit 386118a896554b13f14ad0f82356276988f7de82 +Author: Michal Simek <monstr@monstr.eu> +Date: Tue Dec 8 09:12:49 2009 +0100 + + microblaze: Correct ffs regression for Microblaze + + We are using generic implementation of ffs. This should + be part of Simon's commit 0413cfecea350000eab5e591a0965c3e3ee0ff00 + + Here is warning message which this patch removes. + + In file included from /tmp/u-boot-microblaze/include/common.h:38, + from cmd_mtdparts.c:87: + /tmp/u-boot-microblaze/include/linux/bitops.h:123:1: warning: "ffs" redefined + In file included from /tmp/u-boot-microblaze/include/linux/bitops.h:110, + from /tmp/u-boot-microblaze/include/common.h:38, + from cmd_mtdparts.c:87: + /tmp/u-boot-microblaze/include/asm/bitops.h:269:1: + warning: this is the location of the previous definition + + Signed-off-by: Michal Simek <monstr@monstr.eu> + +commit 8fe7b29f9811322931f0192a56431edcf819d6b9 +Author: Graeme Smecher <graeme.smecher@mail.mcgill.ca> +Date: Mon Dec 7 08:09:57 2009 -0800 + + microblaze: Stop stack clobbering in microblaze-generic. + + A typo caused the stack and malloc regions to overlap, which prevented + mem_malloc_init() from returning. This commit makes the memory layout match + the example described in include/configs/microblaze-generic.h + + Signed-off-by: Graeme Smecher <graeme.smecher@mail.mcgill.ca> + Signed-off-by: Michal Simek <monstr@monstr.eu> + +commit 0fc52948bda0734431cb528ee4fd82f1dec8c7b5 +Author: Wolfgang Denk <wd@denx.de> +Date: Mon Dec 7 23:14:13 2009 +0100 + + Update CHANGELOG, prepare -rc2 + + Signed-off-by: Wolfgang Denk <wd@denx.de> + commit f2352877cb2daac88115192fb09991a2397d0b27 Author: Peter Tyser <ptyser@xes-inc.com> Date: Sun Dec 6 23:58:28 2009 -0600 @@ -24,7 +24,7 @@ VERSION = 2009 PATCHLEVEL = 11 SUBLEVEL = -EXTRAVERSION = -rc2 +EXTRAVERSION = ifneq "$(SUBLEVEL)" "" U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) else |