summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--board/amcc/luan/luan.c7
-rw-r--r--board/amcc/yucca/yucca.c34
-rw-r--r--board/lwmon5/sdram.c1
-rw-r--r--cpu/ppc4xx/44x_spd_ddr.c1
-rw-r--r--cpu/ppc4xx/44x_spd_ddr2.c58
-rw-r--r--cpu/ppc4xx/4xx_enet.c8
-rw-r--r--cpu/ppc4xx/tlb.c62
-rw-r--r--include/asm-ppc/mmu.h3
-rw-r--r--include/configs/luan.h1
-rw-r--r--include/configs/lwmon5.h3
10 files changed, 157 insertions, 21 deletions
diff --git a/board/amcc/luan/luan.c b/board/amcc/luan/luan.c
index 2eff3b3..7b16f8a 100644
--- a/board/amcc/luan/luan.c
+++ b/board/amcc/luan/luan.c
@@ -104,6 +104,13 @@ int checkboard(void)
return 0;
}
+/*
+ * Override the default functions in cpu/ppc4xx/44x_spd_ddr2.c with
+ * board specific values.
+ */
+u32 ddr_clktr(u32 default_val) {
+ return (SDRAM_CLKTR_CLKP_180_DEG_ADV);
+}
/*************************************************************************
* int testdram()
diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c
index 7316c34..d08fcf3 100644
--- a/board/amcc/yucca/yucca.c
+++ b/board/amcc/yucca/yucca.c
@@ -562,6 +562,40 @@ int checkboard (void)
return 0;
}
+/*
+ * Override the default functions in cpu/ppc4xx/44x_spd_ddr2.c with
+ * board specific values.
+ */
+static int ppc440spe_rev_a(void)
+{
+ if ((get_pvr() == PVR_440SPe_6_RA) || (get_pvr() == PVR_440SPe_RA))
+ return 1;
+ else
+ return 0;
+}
+
+u32 ddr_wrdtr(u32 default_val) {
+ /*
+ * Yucca boards with 440SPe rev. A need a slightly different setup
+ * for the MCIF0_WRDTR register.
+ */
+ if (ppc440spe_rev_a())
+ return (SDRAM_WRDTR_LLWP_1_CYC | SDRAM_WRDTR_WTR_270_DEG_ADV);
+
+ return default_val;
+}
+
+u32 ddr_clktr(u32 default_val) {
+ /*
+ * Yucca boards with 440SPe rev. A need a slightly different setup
+ * for the MCIF0_CLKTR register.
+ */
+ if (ppc440spe_rev_a())
+ return (SDRAM_CLKTR_CLKP_180_DEG_ADV);
+
+ return default_val;
+}
+
#if defined(CFG_DRAM_TEST)
int testdram (void)
{
diff --git a/board/lwmon5/sdram.c b/board/lwmon5/sdram.c
index 9a4a8ee..b6863b6 100644
--- a/board/lwmon5/sdram.c
+++ b/board/lwmon5/sdram.c
@@ -54,7 +54,6 @@
#define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE /* disable caching on SDRAM */
#endif
-void program_tlb(u32 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value);
void dcbz_area(u32 start_address, u32 num_bytes);
void dflush(void);
diff --git a/cpu/ppc4xx/44x_spd_ddr.c b/cpu/ppc4xx/44x_spd_ddr.c
index 6d6fba1..e5f296e 100644
--- a/cpu/ppc4xx/44x_spd_ddr.c
+++ b/cpu/ppc4xx/44x_spd_ddr.c
@@ -271,7 +271,6 @@ typedef struct bank_param BANKPARMS;
#ifdef CFG_SIMULATE_SPD_EEPROM
extern unsigned char cfg_simulate_spd_eeprom[128];
#endif
-void program_tlb(u32 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value);
static unsigned char spd_read(uchar chip, uint addr);
static void get_spd_info(unsigned long *dimm_populated,
diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c
index 5fef27b..18b90ba 100644
--- a/cpu/ppc4xx/44x_spd_ddr2.c
+++ b/cpu/ppc4xx/44x_spd_ddr2.c
@@ -109,7 +109,7 @@
/* Defines for the Read Cycle Delay test */
#define NUMMEMTESTS 8
#define NUMMEMWORDS 8
-#define NUMLOOPS 256 /* memory test loops */
+#define NUMLOOPS 64 /* memory test loops */
#undef CONFIG_ECC_ERROR_RESET /* test-only: see description below, at check_ecc() */
@@ -138,6 +138,26 @@ void __spd_ddr_init_hang (void)
}
void spd_ddr_init_hang (void) __attribute__((weak, alias("__spd_ddr_init_hang")));
+/*
+ * To provide an interface for board specific config values in this common
+ * DDR setup code, we implement he "weak" default functions here. They return
+ * the default value back to the caller.
+ *
+ * Please see include/configs/yucca.h for an example fora board specific
+ * implementation.
+ */
+u32 __ddr_wrdtr(u32 default_val)
+{
+ return default_val;
+}
+u32 ddr_wrdtr(u32) __attribute__((weak, alias("__ddr_wrdtr")));
+
+u32 __ddr_clktr(u32 default_val)
+{
+ return default_val;
+}
+u32 ddr_clktr(u32) __attribute__((weak, alias("__ddr_clktr")));
+
/* Private Structure Definitions */
@@ -154,7 +174,6 @@ typedef enum ddr_cas_id {
* Prototypes
*-----------------------------------------------------------------------------*/
static unsigned long sdram_memsize(void);
-void program_tlb(u32 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value);
static void get_spd_info(unsigned long *dimm_populated,
unsigned char *iic0_dimm_addr,
unsigned long num_dimm_banks);
@@ -216,9 +235,7 @@ static void test(void);
#else
static void DQS_calibration_process(void);
#endif
-#if defined(DEBUG)
static void ppc440sp_sdram_register_dump(void);
-#endif
int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
void dcbz_area(u32 start_address, u32 num_bytes);
void dflush(void);
@@ -469,17 +486,14 @@ long int initdram(int board_type)
*-----------------------------------------------------------------*/
mfsdram(SDRAM_WRDTR, val);
mtsdram(SDRAM_WRDTR, (val & ~(SDRAM_WRDTR_LLWP_MASK | SDRAM_WRDTR_WTR_MASK)) |
- (SDRAM_WRDTR_LLWP_1_CYC | SDRAM_WRDTR_WTR_90_DEG_ADV));
+ ddr_wrdtr(SDRAM_WRDTR_LLWP_1_CYC | SDRAM_WRDTR_WTR_90_DEG_ADV));
/*------------------------------------------------------------------
* Set the SDRAM Clock Timing Register
*-----------------------------------------------------------------*/
mfsdram(SDRAM_CLKTR, val);
-#ifdef CFG_44x_DDR2_CKTR_180
- mtsdram(SDRAM_CLKTR, (val & ~SDRAM_CLKTR_CLKP_MASK) | SDRAM_CLKTR_CLKP_180_DEG_ADV);
-#else
- mtsdram(SDRAM_CLKTR, (val & ~SDRAM_CLKTR_CLKP_MASK) | SDRAM_CLKTR_CLKP_0_DEG);
-#endif
+ mtsdram(SDRAM_CLKTR, (val & ~SDRAM_CLKTR_CLKP_MASK) |
+ ddr_clktr(SDRAM_CLKTR_CLKP_0_DEG));
/*------------------------------------------------------------------
* Program the BxCF registers.
@@ -538,7 +552,12 @@ long int initdram(int board_type)
dram_size = sdram_memsize();
/* and program tlb entries for this size (dynamic) */
- program_tlb(0, 0, dram_size, MY_TLB_WORD2_I_ENABLE);
+
+ /*
+ * Program TLB entries with caches enabled, for best performace
+ * while auto-calibrating and ECC generation
+ */
+ program_tlb(0, 0, dram_size, 0);
/*------------------------------------------------------------------
* DQS calibration.
@@ -549,12 +568,18 @@ long int initdram(int board_type)
/*------------------------------------------------------------------
* If ecc is enabled, initialize the parity bits.
*-----------------------------------------------------------------*/
- program_ecc(dimm_populated, iic0_dimm_addr, num_dimm_banks, MY_TLB_WORD2_I_ENABLE);
+ program_ecc(dimm_populated, iic0_dimm_addr, num_dimm_banks, 0);
#endif
-#ifdef DEBUG
+ /*
+ * Now after initialization (auto-calibration and ECC generation)
+ * remove the TLB entries with caches enabled and program again with
+ * desired cache functionality
+ */
+ remove_tlb(0, dram_size);
+ program_tlb(0, 0, dram_size, MY_TLB_WORD2_I_ENABLE);
+
ppc440sp_sdram_register_dump();
-#endif
return dram_size;
}
@@ -2703,6 +2728,7 @@ calibration_loop:
printf("\nERROR: Cannot determine a common read delay for the "
"DIMM(s) installed.\n");
debug("%s[%d] ERROR : \n", __FUNCTION__,__LINE__);
+ ppc440sp_sdram_register_dump();
spd_ddr_init_hang ();
}
@@ -3028,5 +3054,9 @@ static void ppc440sp_sdram_register_dump(void)
dcr_data = mfdcr(SDRAM_R3BAS);
printf(" MQ3_B0BAS = 0x%08X\n", dcr_data);
}
+#else
+static void ppc440sp_sdram_register_dump(void)
+{
+}
#endif
#endif /* CONFIG_SPD_EEPROM */
diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c
index 1200d02..b90363f 100644
--- a/cpu/ppc4xx/4xx_enet.c
+++ b/cpu/ppc4xx/4xx_enet.c
@@ -1415,10 +1415,8 @@ static void enet_rcv (struct eth_device *dev, unsigned long malisr)
if ((MAL_RX_CTRL_EMPTY & hw_p->rx[i].ctrl)
|| (loop_count >= NUM_RX_BUFF))
break;
+
loop_count++;
- hw_p->rx_slot++;
- if (NUM_RX_BUFF == hw_p->rx_slot)
- hw_p->rx_slot = 0;
handled++;
data_len = (unsigned long) hw_p->rx[i].data_len; /* Get len */
if (data_len) {
@@ -1468,6 +1466,10 @@ static void enet_rcv (struct eth_device *dev, unsigned long malisr)
if (NUM_RX_BUFF == hw_p->rx_i_index)
hw_p->rx_i_index = 0;
+ hw_p->rx_slot++;
+ if (NUM_RX_BUFF == hw_p->rx_slot)
+ hw_p->rx_slot = 0;
+
/* AS.HARNOIS
* free receive buffer only when
* buffer has been handled (eth_rx)
diff --git a/cpu/ppc4xx/tlb.c b/cpu/ppc4xx/tlb.c
index 049a785..098694c 100644
--- a/cpu/ppc4xx/tlb.c
+++ b/cpu/ppc4xx/tlb.c
@@ -25,7 +25,6 @@
#if defined(CONFIG_440)
-#include <ppc4xx.h>
#include <ppc440.h>
#include <asm/io.h>
#include <asm/mmu.h>
@@ -36,6 +35,67 @@ typedef struct region {
unsigned long tlb_word2_i_value;
} region_t;
+void remove_tlb(u32 vaddr, u32 size)
+{
+ int i;
+ u32 tlb_word0_value;
+ u32 tlb_vaddr;
+ u32 tlb_size = 0;
+
+ /* First, find the index of a TLB entry not being used */
+ for (i=0; i<PPC4XX_TLB_SIZE; i++) {
+ tlb_word0_value = mftlb1(i);
+ tlb_vaddr = TLB_WORD0_EPN_DECODE(tlb_word0_value);
+ if (((tlb_word0_value & TLB_WORD0_V_MASK) == TLB_WORD0_V_ENABLE) &&
+ (tlb_vaddr >= vaddr)) {
+ /*
+ * TLB is enabled and start address is lower or equal
+ * than the area we are looking for. Now we only have
+ * to check the size/end address for a match.
+ */
+ switch (tlb_word0_value & TLB_WORD0_SIZE_MASK) {
+ case TLB_WORD0_SIZE_1KB:
+ tlb_size = 1 << 10;
+ break;
+ case TLB_WORD0_SIZE_4KB:
+ tlb_size = 4 << 10;
+ break;
+ case TLB_WORD0_SIZE_16KB:
+ tlb_size = 16 << 10;
+ break;
+ case TLB_WORD0_SIZE_64KB:
+ tlb_size = 64 << 10;
+ break;
+ case TLB_WORD0_SIZE_256KB:
+ tlb_size = 256 << 10;
+ break;
+ case TLB_WORD0_SIZE_1MB:
+ tlb_size = 1 << 20;
+ break;
+ case TLB_WORD0_SIZE_16MB:
+ tlb_size = 16 << 20;
+ break;
+ case TLB_WORD0_SIZE_256MB:
+ tlb_size = 256 << 20;
+ break;
+ }
+
+ /*
+ * Now check the end-address if it's in the range
+ */
+ if ((tlb_vaddr + tlb_size - 1) <= (vaddr + size - 1))
+ /*
+ * Found a TLB in the range.
+ * Disable it by writing 0 to tlb0 word.
+ */
+ mttlb1(i, 0);
+ }
+ }
+
+ /* Execute an ISYNC instruction so that the new TLB entry takes effect */
+ asm("isync");
+}
+
static int add_tlb_entry(unsigned long phys_addr,
unsigned long virt_addr,
unsigned long tlb_word0_size_value,
diff --git a/include/asm-ppc/mmu.h b/include/asm-ppc/mmu.h
index 48fd982..b3cfa9b 100644
--- a/include/asm-ppc/mmu.h
+++ b/include/asm-ppc/mmu.h
@@ -645,6 +645,9 @@ void mttlb3(unsigned long index, unsigned long value);
unsigned long mftlb1(unsigned long index);
unsigned long mftlb2(unsigned long index);
unsigned long mftlb3(unsigned long index);
+
+void program_tlb(u32 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value);
+void remove_tlb(u32 vaddr, u32 size);
#endif /* __ASSEMBLY__ */
#endif /* CONFIG_440 */
diff --git a/include/configs/luan.h b/include/configs/luan.h
index cbb59c5..e192d06 100644
--- a/include/configs/luan.h
+++ b/include/configs/luan.h
@@ -136,7 +136,6 @@
#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */
#define SPD_EEPROM_ADDRESS {0x53, 0x52} /* SPD i2c spd addresses*/
#define CONFIG_DDR_ECC 1 /* with ECC support */
-#define CFG_44x_DDR2_CKTR_180 1 /* use 180 deg advance */
/*-----------------------------------------------------------------------
* I2C
diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index 1d87c73..c4b7c4e 100644
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -162,6 +162,7 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"hostname=lwmon5\0" \
"netdev=eth0\0" \
+ "unlock=yes\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
@@ -183,6 +184,8 @@
"update=protect off FFF80000 FFFFFFFF;era FFF80000 FFFFFFFF;" \
"cp.b 200000 FFF80000 80000\0" \
"upd=run load;run update\0" \
+ "lwe_env=tftp 200000 /tftpboot.dev/lwmon5/env_uboot.bin;" \
+ "autoscr 200000\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
generated by cgit v1.1 at 2024-08-22 19:03:27 +0000