summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--board/at91rm9200dk/led.c2
-rwxr-xr-xcpu/arm920t/start.S126
-rwxr-xr-xinclude/asm-arm/coloured_led.h (renamed from include/asm-arm/led.h)0
3 files changed, 22 insertions, 106 deletions
diff --git a/board/at91rm9200dk/led.c b/board/at91rm9200dk/led.c
index 0518918..47a3bfc 100644
--- a/board/at91rm9200dk/led.c
+++ b/board/at91rm9200dk/led.c
@@ -66,7 +66,7 @@ void red_LED_off(void)
}
-void LED_init (void)
+void coloured_LED_init (void)
{
AT91PS_PIO PIOB = AT91C_BASE_PIOB;
AT91PS_PMC PMC = AT91C_BASE_PMC;
diff --git a/cpu/arm920t/start.S b/cpu/arm920t/start.S
index 1bc6099..df2ee20 100755
--- a/cpu/arm920t/start.S
+++ b/cpu/arm920t/start.S
@@ -27,7 +27,7 @@
#include <config.h>
#include <version.h>
-#include <asm/led.h>
+#include <asm/coloured_led.h>
/*
*************************************************************************
@@ -39,7 +39,7 @@
.globl _start
-_start: b reset
+_start: b start_code
ldr pc, _undefined_instruction
ldr pc, _software_interrupt
ldr pc, _prefetch_abort
@@ -62,7 +62,7 @@ _fiq: .word fiq
/*
*************************************************************************
*
- * Startup Code (reset vector)
+ * Startup Code (called from the ARM reset exception vector)
*
* do important init only if we don't start from memory!
* relocate armboot to ram
@@ -104,10 +104,10 @@ FIQ_STACK_START:
/*
- * the actual reset code
+ * the actual start code
*/
-reset:
+start_code:
/*
* set the cpu to SVC32 mode
*/
@@ -115,59 +115,13 @@ reset:
bic r0,r0,#0x1f
orr r0,r0,#0xd3
msr cpsr,r0
- /*
- * if board has a red led use it to show U-Boot is running
- */
+
bl coloured_LED_init
bl red_LED_on
-#ifdef CONFIG_AT91RM9200
-#ifdef CONFIG_BOOTBINFUNC
-/* code based on entry.S from ATMEL */
-#define AT91C_BASE_CKGR 0xFFFFFC20
-#define CKGR_MOR 0
- /* Get the CKGR Base Address */
- ldr r1, =AT91C_BASE_CKGR
-
-/* Main oscillator Enable register APMC_MOR : Enable main oscillator , OSCOUNT = 0xFF */
-/* ldr r0, = AT91C_CKGR_MOSCEN:OR:AT91C_CKGR_OSCOUNT */
- ldr r0, =0x0000FF01
- str r0, [r1, #CKGR_MOR]
- /* Add loop to compensate Main Oscillator startup time */
- ldr r0, =0x00000010
-LoopOsc:
- subs r0, r0, #1
- bhi LoopOsc
- /* scratch stack */
- ldr r1, =0x00204000
- /* Insure word alignment */
- bic r1, r1, #3
- /* Init stack SYS */
- mov sp, r1
- /*
- * This does a lot more than just set up the memory, which
- * is why it's called lowlevelinit
- */
- bl lowlevelinit /* in memsetup.S */
- bl icache_enable;
- /* ------------------------------------
- * Read/modify/write CP15 control register
- * -------------------------------------
- * read cp15 control register (cp15 r1) in r0
- * ------------------------------------
- */
- mrc p15, 0, r0, c1, c0, 0
- /* Reset bit :Little Endian end fast bus mode */
- ldr r3, =0xC0000080
- /* Set bit :Asynchronous clock mode, Not Fast Bus */
- ldr r4, =0xC0000000
- bic r0, r0, r3
- orr r0, r0, r4
- /* write r0 in cp15 control register (cp15 r1) */
- mcr p15, 0, r0, c1, c0, 0
-#endif /* CONFIG_BOOTBINFUNC */
+#if defined(CONFIG_AT91RM9200DK) || defined(CONFIG_AT91RM9200EK) || defined(CONFIG_AT91RM9200DF)
/*
- * relocate exeception table
+ * relocate exception table
*/
ldr r0, =_start
ldr r1, =0x0
@@ -179,19 +133,20 @@ copyex:
bne copyex
#endif
-/* turn off the watchdog */
-#if defined(CONFIG_S3C2400)
-# define pWTCON 0x15300000
-# define INTMSK 0x14400008 /* Interupt-Controller base addresses */
-# define CLKDIVN 0x14800014 /* clock divisor register */
-#elif defined(CONFIG_S3C2410)
-# define pWTCON 0x53000000
-# define INTMSK 0x4A000008 /* Interupt-Controller base addresses */
-# define INTSUBMSK 0x4A00001C
-# define CLKDIVN 0x4C000014 /* clock divisor register */
-#endif
-
#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410)
+ /* turn off the watchdog */
+
+# if defined(CONFIG_S3C2400)
+# define pWTCON 0x15300000
+# define INTMSK 0x14400008 /* Interupt-Controller base addresses */
+# define CLKDIVN 0x14800014 /* clock divisor register */
+#else
+# define pWTCON 0x53000000
+# define INTMSK 0x4A000008 /* Interupt-Controller base addresses */
+# define INTSUBMSK 0x4A00001C
+# define CLKDIVN 0x4C000014 /* clock divisor register */
+# endif
+
ldr r0, =pWTCON
mov r1, #0x0
str r1, [r0]
@@ -224,25 +179,7 @@ copyex:
#endif
#ifdef CONFIG_AT91RM9200
-#ifdef CONFIG_BOOTBINFUNC
-relocate: /* relocate U-Boot to RAM */
- adr r0, _start /* r0 <- current position of code */
- ldr r1, _TEXT_BASE /* test if we run from flash or RAM */
- cmp r0, r1 /* don't reloc during debug */
- beq stack_setup
- ldr r2, _armboot_start
- ldr r3, _bss_start
- sub r2, r3, r2 /* r2 <- size of armboot */
- add r2, r0, r2 /* r2 <- source end address */
-
-copy_loop:
- ldmia r0!, {r3-r10} /* copy from source address [r0] */
- stmia r1!, {r3-r10} /* copy to target address [r1] */
- cmp r0, r2 /* until source end addreee [r2] */
- ble copy_loop
-#endif /* CONFIG_BOOTBINFUNC */
-#else
#ifndef CONFIG_SKIP_RELOCATE_UBOOT
relocate: /* relocate U-Boot to RAM */
adr r0, _start /* r0 <- current position of code */
@@ -282,27 +219,6 @@ clbss_l:str r2, [r0] /* clear loop... */
cmp r0, r1
ble clbss_l
-#if 0
- /* try doing this stuff after the relocation */
- ldr r0, =pWTCON
- mov r1, #0x0
- str r1, [r0]
-
- /*
- * mask all IRQs by setting all bits in the INTMR - default
- */
- mov r1, #0xffffffff
- ldr r0, =INTMR
- str r1, [r0]
-
- /* FCLK:HCLK:PCLK = 1:2:4 */
- /* default FCLK is 120 MHz ! */
- ldr r0, =CLKDIVN
- mov r1, #3
- str r1, [r0]
- /* END stuff after relocation */
-#endif
-
ldr pc, _start_armboot
_start_armboot: .word start_armboot
diff --git a/include/asm-arm/led.h b/include/asm-arm/coloured_led.h
index f78a4b1..f78a4b1 100755
--- a/include/asm-arm/led.h
+++ b/include/asm-arm/coloured_led.h