diff options
| -rw-r--r-- | CHANGELOG | 13 | ||||
| -rw-r--r-- | board/dbau1x00/lowlevel_init.S | 5 | ||||
| -rw-r--r-- | common/cmd_flash.c | 15 | ||||
| -rw-r--r-- | include/configs/dbau1x00.h | 7 |
4 files changed, 27 insertions, 13 deletions
@@ -1,6 +1,19 @@ ====================================================================== Changes since U-Boot 1.1.4: ====================================================================== +* Fix dbau1x00 Board + - Fix dbau1x00 boards broken by dbau1550 patch + PLL:s were not set for boards other than 1550. + Flash CFI caused card to hang due to undefined CFG_FLASH_BANKS_LIST. + Default boot is now bootp for cards other than 1550. + Patch by Thomas Lange Aug 10 2005 + +* Fixes common/cmd_flash.c: + + - fix some compiler/parser error, if using m68k tool chain + - optical fix for protect on/off all messages, if using more + then one bank + Patch by Jens Scharsig, 28 July 2005 * Fix Quad UART mapping on MCC200 board due to new HW revision diff --git a/board/dbau1x00/lowlevel_init.S b/board/dbau1x00/lowlevel_init.S index 7afd584..14a7846 100644 --- a/board/dbau1x00/lowlevel_init.S +++ b/board/dbau1x00/lowlevel_init.S @@ -185,6 +185,8 @@ tlbloop: bne t0, t2, tlbloop nop +#endif /* CONFIG_DBAU1550 */ + /* First setup pll:s to make serial work ok */ /* We have a 12 MHz crystal */ li t0, SYS_CPUPLL @@ -205,6 +207,7 @@ tlbloop: sw t1, 0(t0) /* aux pll */ sync +#ifdef CONFIG_DBAU1550 /* Static memory controller */ /* RCE0 - can not change while fetching, do so from icache */ move t2, ra /* Store return address */ @@ -237,7 +240,7 @@ noCacheJump: sw t1, 0(t0) #else /* CONFIG_DBAU1550 */ li t0, MEM_STTIME0 - li t1, 0x00014C0F + li t1, 0x040181D7 sw t1, 0(t0) /* RCE0 AMD 29LV640M MirrorBit Flash */ diff --git a/common/cmd_flash.c b/common/cmd_flash.c index 201f4e3..cb1c5bb 100644 --- a/common/cmd_flash.c +++ b/common/cmd_flash.c @@ -125,13 +125,16 @@ abbrev_spec (char *str, flash_info_t ** pinfo, int *psf, int *psl) static int addr_spec(char *arg1, char *arg2, ulong *addr_first, ulong *addr_last) { - char len_used = 0; /* indicates if the "start +length" form used */ char *ep; + char len_used; /* indicates if the "start +length" form used */ + char found; + ulong bank; *addr_first = simple_strtoul(arg1, &ep, 16); if (ep == arg1 || *ep != '\0') return -1; + len_used = 0; if (arg2 && *arg2 == '+'){ len_used = 1; ++arg2; @@ -142,9 +145,6 @@ addr_spec(char *arg1, char *arg2, ulong *addr_first, ulong *addr_last) return -1; if (len_used){ - char found = 0; - ulong bank; - /* * *addr_last has the length, compute correct *addr_last * XXX watch out for the integer overflow! Right now it is @@ -159,6 +159,7 @@ addr_spec(char *arg1, char *arg2, ulong *addr_first, ulong *addr_last) */ /* find the end addr of the sector where the *addr_last is */ + found = 0; for (bank = 0; bank < CFG_MAX_FLASH_BANKS && !found; ++bank){ int i; flash_info_t *info = &flash_info[bank]; @@ -506,12 +507,10 @@ int do_protect (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) info->protect[i] = p; #endif /* CFG_FLASH_PROTECTION */ } - } - #if defined(CFG_FLASH_PROTECTION) - if (!rcode) puts (" done\n"); + if (!rcode) puts (" done\n"); #endif /* CFG_FLASH_PROTECTION */ - + } return rcode; } diff --git a/include/configs/dbau1x00.h b/include/configs/dbau1x00.h index 0a10e3c..4cc5085 100644 --- a/include/configs/dbau1x00.h +++ b/include/configs/dbau1x00.h @@ -81,8 +81,7 @@ CFG_CMD_MII | CFG_CMD_RUN | CFG_CMD_BDI | CFG_CMD_BEDBUG | \ CFG_CMD_NFS | CFG_CMD_ELF | CFG_CMD_PCMCIA | CFG_CMD_I2C)) #else /* CONFIG_DBAU1550 */ -/* Boot from Compact flash partition 2 as default */ -#define CONFIG_BOOTCOMMAND "ide reset;disk 0x81000000 0:2;bootm" +#define CONFIG_BOOTCOMMAND "bootp;bootm" #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_IDE | CFG_CMD_DHCP | CFG_CMD_ELF) & \ ~(CFG_CMD_ENV | CFG_CMD_FAT | CFG_CMD_FLASH | CFG_CMD_FPGA | \ @@ -133,8 +132,6 @@ #define PHYS_FLASH_1 0xb8000000 /* Flash Bank #1 */ #define PHYS_FLASH_2 0xbc000000 /* Flash Bank #2 */ -#define CFG_FLASH_BANKS_LIST {PHYS_FLASH_1, PHYS_FLASH_2} - #else /* CONFIG_DBAU1550 */ #define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ @@ -145,6 +142,8 @@ #endif /* CONFIG_DBAU1550 */ +#define CFG_FLASH_BANKS_LIST {PHYS_FLASH_1, PHYS_FLASH_2} + #define CFG_FLASH_CFI 1 #define CFG_FLASH_CFI_DRIVER 1 |