summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--CHANGELOG4
-rw-r--r--board/integratorap/integratorap.c28
-rw-r--r--board/integratorap/platform.S64
-rw-r--r--board/mpc8260ads/mpc8260ads.c4
-rw-r--r--board/omap2420h4/sys_info.c1
-rw-r--r--common/spartan3.c2
-rw-r--r--cpu/mpc8260/pci.c44
-rw-r--r--include/configs/MPC8260ADS.h11
-rw-r--r--include/configs/integratorap.h243
-rw-r--r--include/configs/omap2420h4.h7
10 files changed, 197 insertions, 211 deletions
diff --git a/CHANGELOG b/CHANGELOG
index a82a9a6..28971a9 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -28,8 +28,8 @@ Changes for U-Boot 1.1.4:
Patch by Zachary Landau, 21 Feb 2005
* Update ep8260: Fix flash timeouts; improve clock resolution for faster UARTs
- Patch by Jeff Angielski, 21 Feb 2005
-
+ Patch by Jeff Angielski, 21 Feb 2005
+
* Fix au1x00_serial baud rate calculation:
remove hardcoded cpu clock divisor and use register instead;
round up instead of truncate
diff --git a/board/integratorap/integratorap.c b/board/integratorap/integratorap.c
index ff074ca..d4f61d6 100644
--- a/board/integratorap/integratorap.c
+++ b/board/integratorap/integratorap.c
@@ -36,7 +36,7 @@
#include <common.h>
#ifdef CONFIG_PCI
-# include <pci.h>
+#include <pci.h>
#endif
void flash__init (void);
@@ -46,7 +46,7 @@ void peripheral_power_enable (void);
#if defined(CONFIG_SHOW_BOOT_PROGRESS)
void show_boot_progress(int progress)
{
- printf("Boot reached stage %d\n", progress);
+ printf("Boot reached stage %d\n", progress);
}
#endif
@@ -79,7 +79,7 @@ int board_init (void)
extern void cm_remap(void);
cm_remap(); /* remaps writeable memory to 0x00000000 */
#endif
-
+
icache_enable ();
flash__init ();
@@ -483,7 +483,7 @@ int dram_init (void)
DECLARE_GLOBAL_DATA_PTR;
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
#ifdef CONFIG_CM_SPD_DETECT
{
@@ -492,22 +492,22 @@ extern void dram_query(void);
unsigned long sdram_shift;
dram_query(); /* Assembler accesses to CM registers */
- /* Queries the SPD values */
+ /* Queries the SPD values */
/* Obtain the SDRAM size from the CM SDRAM register */
cm_reg_sdram = *(volatile ulong *)(CM_BASE + OS_SDRAM);
- /* Register SDRAM size
+ /* Register SDRAM size
+ *
+ * 0xXXXXXXbbb000bb 16 MB
+ * 0xXXXXXXbbb001bb 32 MB
+ * 0xXXXXXXbbb010bb 64 MB
+ * 0xXXXXXXbbb011bb 128 MB
+ * 0xXXXXXXbbb100bb 256 MB
*
- * 0xXXXXXXbbb000bb 16 MB
- * 0xXXXXXXbbb001bb 32 MB
- * 0xXXXXXXbbb010bb 64 MB
- * 0xXXXXXXbbb011bb 128 MB
- * 0xXXXXXXbbb100bb 256 MB
- *
*/
- sdram_shift = ((cm_reg_sdram & 0x0000001C)/4)%4;
- gd->bd->bi_dram[0].size = 0x01000000 << sdram_shift;
+ sdram_shift = ((cm_reg_sdram & 0x0000001C)/4)%4;
+ gd->bd->bi_dram[0].size = 0x01000000 << sdram_shift;
}
#endif /* CM_SPD_DETECT */
diff --git a/board/integratorap/platform.S b/board/integratorap/platform.S
index fefee72..2d9b436 100644
--- a/board/integratorap/platform.S
+++ b/board/integratorap/platform.S
@@ -36,7 +36,7 @@ reset_cpu:
reset_failed:
b reset_failed
-
+
/* set up the platform, once the cpu has been initialized */
.globl platformsetup
platformsetup:
@@ -48,45 +48,45 @@ platformsetup:
* itself should be performed in cpu/arm<>/start.S
* This function affects only the core module or board settings
*/
-
+
#ifdef CONFIG_CM_INIT
/* CM has an initialization register
* - bits in it are wired into test-chip pins to force
* reset defaults
* - may need to change its contents for U-Boot
*/
-
+
/* set the desired CM specific value */
mov r2,#CMMASK_LOWVEC /* Vectors at 0x00000000 for all */
-
+
#if defined (CONFIG_CM10200E) || defined (CONFIG_CM10220E)
orr r2,r2,#CMMASK_INIT_102
#else
-
+
#if !defined (CONFIG_CM920T) && !defined (CONFIG_CM920T_ETM) && \
!defined (CONFIG_CM940T)
-
+
#ifdef CONFIG_CM_MULTIPLE_SSRAM
/* set simple mapping */
and r2,r2,#CMMASK_MAP_SIMPLE
#endif /* #ifdef CONFIG_CM_MULTIPLE_SSRAM */
-
+
#ifdef CONFIG_CM_TCRAM
/* disable TCRAM */
and r2,r2,#CMMASK_TCRAM_DISABLE
#endif /* #ifdef CONFIG_CM_TCRAM */
-
+
#if defined (CONFIG_CM926EJ_S) || defined (CONFIG_CM1026EJ_S) || \
defined (CONFIG_CM1136JF_S)
and r2,r2,#CMMASK_LE
-
+
#endif /* cpu with little endian initialization */
-
+
orr r2,r2,#CMMASK_CMxx6_COMMON
-
+
#endif /* CMxx6 code */
-
+
#endif /* ARM102xxE value */
/* read CM_INIT */
@@ -96,7 +96,7 @@ platformsetup:
and r3,r1,r2
cmp r3,r2
beq init_reg_OK
-
+
/* lock for change */
mov r3, #CMVAL_LOCK
and r3,r3,#CMMASK_LOCK
@@ -107,16 +107,16 @@ platformsetup:
str r1, [r0, #OS_INIT]
mov r1, #CMVAL_UNLOCK
str r1, [r0, #OS_LOCK]
-
+
/* soft reset so new values used */
b reset_cpu
-
+
init_reg_OK:
-
+
#endif /* CONFIG_CM_INIT */
-
+
mov pc, lr
-
+
#ifdef CONFIG_CM_SPD_DETECT
/* Fast memory is available for the DRAM data
* - ensure it has been transferred, then summarize the data
@@ -128,13 +128,13 @@ dram_query:
/* set up SDRAM info */
/* - based on example code from the CM User Guide */
mov r0, #CM_BASE
-
+
readspdbit:
ldr r1, [r0, #OS_SDRAM] /* read the SDRAM register */
and r1, r1, #0x20 /* mask SPD bit (5) */
cmp r1, #0x20 /* test if set */
bne readspdbit
-
+
setupsdram:
add r0, r0, #OS_SPD /* address the copy of the SDP data */
ldrb r1, [r0, #3] /* number of row address lines */
@@ -148,40 +148,40 @@ setupsdram:
bne not16
mov r6, #0x2 /* store size and CAS latency of 2 */
b writesize
-
+
not16:
cmp r5, #0x20 /* is it 32MB? */
bne not32
mov r6, #0x6
b writesize
-
+
not32:
cmp r5, #0x40 /* is it 64MB? */
bne not64
mov r6, #0xa
b writesize
-
+
not64:
cmp r5, #0x80 /* is it 128MB? */
bne not128
mov r6, #0xe
b writesize
-
+
not128:
/* if it is none of these sizes then it is either 256MB, or
* there is no SDRAM fitted so default to 256MB
*/
mov r6, #0x12
-
+
writesize:
mov r1, r1, ASL#8 /* row addr lines from SDRAM reg */
orr r2, r1, r2, ASL#12 /* OR in column address lines */
orr r3, r2, r3, ASL#16 /* OR in number of banks */
orr r6, r6, r3 /* OR in size and CAS latency */
str r6, [r0, #OS_SDRAM] /* store SDRAM parameters */
-
+
#endif /* #ifdef CONFIG_CM_SPD_DETECT */
-
+
ldmfd r13!,{r4-r6,pc} /* back to caller */
#ifdef CONFIG_CM_REMAP
@@ -191,23 +191,23 @@ writesize:
.globl cm_remap
cm_remap:
stmfd r13!,{r4-r10,lr}
-
+
mov r0, #CM_BASE
ldr r1, [r0, #OS_CTRL]
orr r1, r1, #CMMASK_REMAP /* set remap and led bits */
str r1, [r0, #OS_CTRL]
-
+
/* Now 0x00000000 is writeable, replace the vectors */
ldr r0, =_start /* r0 <- start of vectors */
ldr r2, =_armboot_start /* r2 <- past vectors */
sub r1,r1,r1 /* destination 0x00000000 */
-
+
copy_vec:
ldmia r0!, {r3-r10} /* copy from source address [r0] */
stmia r1!, {r3-r10} /* copy to target address [r1] */
cmp r0, r2 /* until source end address [r2] */
ble copy_vec
-
+
ldmfd r13!,{r4-r10,pc} /* back to caller */
-
+
#endif /* #ifdef CONFIG_CM_REMAP */
diff --git a/board/mpc8260ads/mpc8260ads.c b/board/mpc8260ads/mpc8260ads.c
index 2125963..a1d0a08 100644
--- a/board/mpc8260ads/mpc8260ads.c
+++ b/board/mpc8260ads/mpc8260ads.c
@@ -13,7 +13,7 @@
* Yuli Barcohen <yuli@arabellasw.com>
* Added support for SDRAM DIMMs SPD EEPROM, MII, Ethernet PHY init.
*
- * Copyright (c) 2005 MontaVista Software, Inc.
+ * Copyright (c) 2005 MontaVista Software, Inc.
* Vitaly Bordug <vbordug@ru.mvista.com>
* Added support for PCI.
*
@@ -267,7 +267,7 @@ int board_early_init_f (void)
#ifdef CONFIG_PCI
volatile pci_ic_t* pci_ic = (pci_ic_t *) CFG_PCI_INT;
-
+
/* mask alll the PCI interrupts */
pci_ic->pci_int_mask |= 0xfff00000;
#endif
diff --git a/board/omap2420h4/sys_info.c b/board/omap2420h4/sys_info.c
index 9864d3e..a9f7241 100644
--- a/board/omap2420h4/sys_info.c
+++ b/board/omap2420h4/sys_info.c
@@ -385,4 +385,3 @@ u32 get_device_type(void)
mode = __raw_readl(CONTROL_STATUS) & (BIT10|BIT9|BIT8);
return(mode >>= 8);
}
-
diff --git a/common/spartan3.c b/common/spartan3.c
index f9302e1..c0f2b05 100644
--- a/common/spartan3.c
+++ b/common/spartan3.c
@@ -26,7 +26,7 @@
* Configuration support for Xilinx Spartan3 devices. Based
* on spartan2.c (Rich Ireland, rireland@enterasys.com).
*/
-
+
#include <common.h> /* core U-Boot definitions */
#include <spartan3.h> /* Spartan-II device family */
diff --git a/cpu/mpc8260/pci.c b/cpu/mpc8260/pci.c
index cb0c79b..44576de 100644
--- a/cpu/mpc8260/pci.c
+++ b/cpu/mpc8260/pci.c
@@ -2,7 +2,7 @@
* (C) Copyright 2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
- * Copyright (c) 2005 MontaVista Software, Inc.
+ * Copyright (c) 2005 MontaVista Software, Inc.
* Vitaly Bordug <vbordug@ru.mvista.com>
* Added support for PCI bridge on MPC8272ADS
*
@@ -253,25 +253,25 @@ void pci_mpc8250_init (struct pci_controller *hose)
(immap->im_siu_conf.sc_siumcr & ~SIUMCR_LBPC11)
| SIUMCR_LBPC01;
#elif defined CONFIG_MPC8272
- immap->im_siu_conf.sc_siumcr = (immap->im_siu_conf.sc_siumcr &
- ~SIUMCR_BBD &
- ~SIUMCR_ESE &
- ~SIUMCR_PBSE &
- ~SIUMCR_CDIS &
- ~SIUMCR_DPPC11 &
- ~SIUMCR_L2CPC11 &
- ~SIUMCR_LBPC11 &
- ~SIUMCR_APPC11 &
- ~SIUMCR_CS10PC11 &
- ~SIUMCR_BCTLC11 &
- ~SIUMCR_MMR11)
- | SIUMCR_DPPC11
- | SIUMCR_L2CPC01
- | SIUMCR_LBPC00
- | SIUMCR_APPC10
- | SIUMCR_CS10PC00
- | SIUMCR_BCTLC00
- | SIUMCR_MMR11;
+ immap->im_siu_conf.sc_siumcr = (immap->im_siu_conf.sc_siumcr &
+ ~SIUMCR_BBD &
+ ~SIUMCR_ESE &
+ ~SIUMCR_PBSE &
+ ~SIUMCR_CDIS &
+ ~SIUMCR_DPPC11 &
+ ~SIUMCR_L2CPC11 &
+ ~SIUMCR_LBPC11 &
+ ~SIUMCR_APPC11 &
+ ~SIUMCR_CS10PC11 &
+ ~SIUMCR_BCTLC11 &
+ ~SIUMCR_MMR11)
+ | SIUMCR_DPPC11
+ | SIUMCR_L2CPC01
+ | SIUMCR_LBPC00
+ | SIUMCR_APPC10
+ | SIUMCR_CS10PC00
+ | SIUMCR_BCTLC00
+ | SIUMCR_MMR11;
#else
/*
@@ -399,7 +399,7 @@ void pci_mpc8250_init (struct pci_controller *hose)
hose->last_busno = 0xff;
/* System memory space */
-#if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272
+#if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272
pci_set_region (hose->regions + 0,
PCI_SLV_MEM_BUS,
PCI_SLV_MEM_LOCAL,
@@ -412,7 +412,7 @@ void pci_mpc8250_init (struct pci_controller *hose)
#endif
/* PCI memory space */
-#if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272
+#if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272
pci_set_region (hose->regions + 1,
PCI_MSTR_MEMIO_BUS,
PCI_MSTR_MEMIO_LOCAL,
diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h
index 61a1c27..d8c609b 100644
--- a/include/configs/MPC8260ADS.h
+++ b/include/configs/MPC8260ADS.h
@@ -13,7 +13,7 @@
* Ported to PQ2FADS-ZU and PQ2FADS-VR boards.
* Ported to MPC8272ADS board.
*
- * Copyright (c) 2005 MontaVista Software, Inc.
+ * Copyright (c) 2005 MontaVista Software, Inc.
* Vitaly Bordug <vbordug@ru.mvista.com>
* Added support for PCI bridge on MPC8272ADS
*
@@ -55,7 +55,6 @@
# define CFG_LOWBOOT 1
#endif
-
/* ADS flavours */
#define CFG_8260ADS 1 /* MPC8260ADS */
#define CFG_8266ADS 2 /* MPC8266ADS */
@@ -185,7 +184,6 @@
#define CONFIG_PCI_SCAN_SHOW
#endif
-
#ifndef CONFIG_SDRAM_PBI
#define CONFIG_SDRAM_PBI 0 /* By default, use bank-based interleaving */
#endif
@@ -334,7 +332,6 @@
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
-
#ifdef CFG_LOWBOOT
/* PQ2FADS flash HRCW = 0x0EB4B645 */
#define CFG_HRCW_MASTER ( ( HRCW_BPS11 | HRCW_CIP ) |\
@@ -386,13 +383,11 @@
# define CFG_ENV_SIZE 0x200
#endif /* CFG_RAMBOOT */
-
#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
-
#define CFG_HID0_INIT 0
#define CFG_HID0_FINAL (HID0_ICE | HID0_IFEM | HID0_ABE )
@@ -461,8 +456,6 @@
* these windows.
*/
-
-
/*
* Master window that allows the CPU to access PCI Memory (prefetch).
* This window will be setup with the second set of Outbound ATU registers
@@ -504,7 +497,7 @@
#define CFG_PCI_MSTR0_LOCAL CFG_PCI_MSTR_IO_LOCAL /* Local base */
#define CFG_PCIMSK0_MASK ~(CFG_PCI_MSTR_IO_SIZE - 1U) /* Size of window */
/* PCIBR1 - prefetch and non-prefetch regions joined together */
-#define CFG_PCI_MSTR1_LOCAL CFG_PCI_MSTR_MEM_LOCAL
+#define CFG_PCI_MSTR1_LOCAL CFG_PCI_MSTR_MEM_LOCAL
#define CFG_PCIMSK1_MASK ~(CFG_PCI_MSTR_MEM_SIZE + CFG_PCI_MSTR_MEMIO_SIZE - 1U)
#endif /* CONFIG_ADSTYPE == CONFIG_8272ADS*/
diff --git a/include/configs/integratorap.h b/include/configs/integratorap.h
index 25f4682..ad92f32 100644
--- a/include/configs/integratorap.h
+++ b/include/configs/integratorap.h
@@ -38,15 +38,15 @@
#define CFG_MEMTEST_END 0x10000000
#define CFG_HZ 1000
#define CFG_HZ_CLOCK 24000000 /* Timer 1 is clocked at 24Mhz */
-#define CFG_TIMERBASE 0x13000100 /* Timer1 */
+#define CFG_TIMERBASE 0x13000100 /* Timer1 */
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_MISC_INIT_R 1 /* call misc_init_r during start up */
#undef CONFIG_INIT_CRITICAL
-#define CONFIG_CM_INIT 1
-#define CONFIG_CM_REMAP 1
+#define CONFIG_CM_INIT 1
+#define CONFIG_CM_REMAP 1
#undef CONFIG_CM_SPD_DETECT
/*
@@ -60,36 +60,36 @@
*/
#define CFG_PL010_SERIAL
#define CONFIG_CONS_INDEX 0
-#define CONFIG_BAUDRATE 38400
+#define CONFIG_BAUDRATE 38400
#define CONFIG_PL01x_PORTS { (void *) (CFG_SERIAL0), (void *) (CFG_SERIAL1) }
-#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CFG_SERIAL0 0x16000000
#define CFG_SERIAL1 0x17000000
/*#define CONFIG_COMMANDS (CFG_CMD_DHCP | CFG_CMD_IMI | CFG_CMD_NET | CFG_CMD_PING | CFG_CMD_BDI | CFG_CMD_PCI) */
/*#define CONFIG_NET_MULTI */
-/*#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT */
+/*#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT */
-#define CONFIG_COMMANDS (CFG_CMD_IMI | CFG_CMD_BDI | CFG_CMD_MEMORY)
+#define CONFIG_COMMANDS (CFG_CMD_IMI | CFG_CMD_BDI | CFG_CMD_MEMORY)
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
-#define CONFIG_BOOTDELAY 2
-#define CONFIG_BOOTARGS "root=/dev/mtdblock0 mem=32M console=ttyAM0 console=tty"
-#define CONFIG_BOOTCOMMAND ""
+#define CONFIG_BOOTDELAY 2
+#define CONFIG_BOOTARGS "root=/dev/mtdblock0 mem=32M console=ttyAM0 console=tty"
+#define CONFIG_BOOTCOMMAND ""
/*
* Miscellaneous configurable options
*/
-#define CFG_LONGHELP /* undef to save memory */
+#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "Integrator-AP # " /* Monitor Command Prompt */
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
/* Print Buffer Size */
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
#define CFG_LOAD_ADDR 0x7fc0 /* default load address */
@@ -108,11 +108,11 @@
/*-----------------------------------------------------------------------
* Physical Memory Map
*/
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */
+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
+#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */
#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
-#define CFG_FLASH_BASE 0x24000000
+#define CFG_FLASH_BASE 0x24000000
/*-----------------------------------------------------------------------
* FLASH and environment organization
@@ -123,8 +123,8 @@
/* timeout values are in ticks */
#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */
#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */
-#define CFG_MAX_FLASH_SECT 128
-#define CFG_ENV_SIZE 32768
+#define CFG_MAX_FLASH_SECT 128
+#define CFG_ENV_SIZE 32768
#define PHYS_FLASH_1 (CFG_FLASH_BASE)
@@ -134,35 +134,35 @@
/*#define CONFIG_PCI /--* include pci support */
#undef CONFIG_PCI_PNP
-#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */
+#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */
#define DEBUG
#define CONFIG_EEPRO100
-#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
+#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
#define INTEGRATOR_BOOT_ROM_BASE 0x20000000
-#define INTEGRATOR_HDR0_SDRAM_BASE 0x80000000
+#define INTEGRATOR_HDR0_SDRAM_BASE 0x80000000
/* PCI Base area */
#define INTEGRATOR_PCI_BASE 0x40000000
#define INTEGRATOR_PCI_SIZE 0x3FFFFFFF
/* memory map as seen by the CPU on the local bus */
-#define CPU_PCI_IO_ADRS 0x60000000 /* PCI I/O space base */
+#define CPU_PCI_IO_ADRS 0x60000000 /* PCI I/O space base */
#define CPU_PCI_IO_SIZE 0x10000
#define CPU_PCI_CNFG_ADRS 0x61000000 /* PCI config space */
#define CPU_PCI_CNFG_SIZE 0x1000000
-#define PCI_MEM_BASE 0x40000000 /* 512M to xxx */
+#define PCI_MEM_BASE 0x40000000 /* 512M to xxx */
/* unused 256M from A0000000-AFFFFFFF might be used for I2O ??? */
-#define INTEGRATOR_PCI_IO_BASE 0x60000000 /* 16M to xxx */
+#define INTEGRATOR_PCI_IO_BASE 0x60000000 /* 16M to xxx */
/* unused (128-16)M from B1000000-B7FFFFFF */
-#define PCI_CONFIG_BASE 0x61000000 /* 16M to xxx */
+#define PCI_CONFIG_BASE 0x61000000 /* 16M to xxx */
/* unused ((128-16)M - 64K) from XXX */
-#define PCI_V3_BASE 0x62000000
+#define PCI_V3_BASE 0x62000000
/* V3 PCI bridge controller */
#define V3_BASE 0x62000000 /* V360EPC registers */
@@ -171,97 +171,97 @@
#define PCI_ENET0_MEMADDR (PCI_MEM_BASE)
-#define V3_PCI_VENDOR 0x00000000
-#define V3_PCI_DEVICE 0x00000002
-#define V3_PCI_CMD 0x00000004
-#define V3_PCI_STAT 0x00000006
-#define V3_PCI_CC_REV 0x00000008
-#define V3_PCI_HDR_CF 0x0000000C
-#define V3_PCI_IO_BASE 0x00000010
-#define V3_PCI_BASE0 0x00000014
-#define V3_PCI_BASE1 0x00000018
-#define V3_PCI_SUB_VENDOR 0x0000002C
-#define V3_PCI_SUB_ID 0x0000002E
-#define V3_PCI_ROM 0x00000030
-#define V3_PCI_BPARAM 0x0000003C
-#define V3_PCI_MAP0 0x00000040
-#define V3_PCI_MAP1 0x00000044
-#define V3_PCI_INT_STAT 0x00000048
-#define V3_PCI_INT_CFG 0x0000004C
-#define V3_LB_BASE0 0x00000054
-#define V3_LB_BASE1 0x00000058
-#define V3_LB_MAP0 0x0000005E
-#define V3_LB_MAP1 0x00000062
-#define V3_LB_BASE2 0x00000064
-#define V3_LB_MAP2 0x00000066
-#define V3_LB_SIZE 0x00000068
-#define V3_LB_IO_BASE 0x0000006E
-#define V3_FIFO_CFG 0x00000070
-#define V3_FIFO_PRIORITY 0x00000072
-#define V3_FIFO_STAT 0x00000074
-#define V3_LB_ISTAT 0x00000076
-#define V3_LB_IMASK 0x00000077
-#define V3_SYSTEM 0x00000078
-#define V3_LB_CFG 0x0000007A
-#define V3_PCI_CFG 0x0000007C
-#define V3_DMA_PCI_ADR0 0x00000080
-#define V3_DMA_PCI_ADR1 0x00000090
-#define V3_DMA_LOCAL_ADR0 0x00000084
-#define V3_DMA_LOCAL_ADR1 0x00000094
-#define V3_DMA_LENGTH0 0x00000088
-#define V3_DMA_LENGTH1 0x00000098
-#define V3_DMA_CSR0 0x0000008B
-#define V3_DMA_CSR1 0x0000009B
-#define V3_DMA_CTLB_ADR0 0x0000008C
-#define V3_DMA_CTLB_ADR1 0x0000009C
-#define V3_DMA_DELAY 0x000000E0
-#define V3_MAIL_DATA 0x000000C0
-#define V3_PCI_MAIL_IEWR 0x000000D0
-#define V3_PCI_MAIL_IERD 0x000000D2
-#define V3_LB_MAIL_IEWR 0x000000D4
-#define V3_LB_MAIL_IERD 0x000000D6
-#define V3_MAIL_WR_STAT 0x000000D8
-#define V3_MAIL_RD_STAT 0x000000DA
-#define V3_QBA_MAP 0x000000DC
+#define V3_PCI_VENDOR 0x00000000
+#define V3_PCI_DEVICE 0x00000002
+#define V3_PCI_CMD 0x00000004
+#define V3_PCI_STAT 0x00000006
+#define V3_PCI_CC_REV 0x00000008
+#define V3_PCI_HDR_CF 0x0000000C
+#define V3_PCI_IO_BASE 0x00000010
+#define V3_PCI_BASE0 0x00000014
+#define V3_PCI_BASE1 0x00000018
+#define V3_PCI_SUB_VENDOR 0x0000002C
+#define V3_PCI_SUB_ID 0x0000002E
+#define V3_PCI_ROM 0x00000030
+#define V3_PCI_BPARAM 0x0000003C
+#define V3_PCI_MAP0 0x00000040
+#define V3_PCI_MAP1 0x00000044
+#define V3_PCI_INT_STAT 0x00000048
+#define V3_PCI_INT_CFG 0x0000004C
+#define V3_LB_BASE0 0x00000054
+#define V3_LB_BASE1 0x00000058
+#define V3_LB_MAP0 0x0000005E
+#define V3_LB_MAP1 0x00000062
+#define V3_LB_BASE2 0x00000064
+#define V3_LB_MAP2 0x00000066
+#define V3_LB_SIZE 0x00000068
+#define V3_LB_IO_BASE 0x0000006E
+#define V3_FIFO_CFG 0x00000070
+#define V3_FIFO_PRIORITY 0x00000072
+#define V3_FIFO_STAT 0x00000074
+#define V3_LB_ISTAT 0x00000076
+#define V3_LB_IMASK 0x00000077
+#define V3_SYSTEM 0x00000078
+#define V3_LB_CFG 0x0000007A
+#define V3_PCI_CFG 0x0000007C
+#define V3_DMA_PCI_ADR0 0x00000080
+#define V3_DMA_PCI_ADR1 0x00000090
+#define V3_DMA_LOCAL_ADR0 0x00000084
+#define V3_DMA_LOCAL_ADR1 0x00000094
+#define V3_DMA_LENGTH0 0x00000088
+#define V3_DMA_LENGTH1 0x00000098
+#define V3_DMA_CSR0 0x0000008B
+#define V3_DMA_CSR1 0x0000009B
+#define V3_DMA_CTLB_ADR0 0x0000008C
+#define V3_DMA_CTLB_ADR1 0x0000009C
+#define V3_DMA_DELAY 0x000000E0
+#define V3_MAIL_DATA 0x000000C0
+#define V3_PCI_MAIL_IEWR 0x000000D0
+#define V3_PCI_MAIL_IERD 0x000000D2
+#define V3_LB_MAIL_IEWR 0x000000D4
+#define V3_LB_MAIL_IERD 0x000000D6
+#define V3_MAIL_WR_STAT 0x000000D8
+#define V3_MAIL_RD_STAT 0x000000DA
+#define V3_QBA_MAP 0x000000DC
/* SYSTEM register bits */
-#define V3_SYSTEM_M_RST_OUT (1 << 15)
-#define V3_SYSTEM_M_LOCK (1 << 14)
+#define V3_SYSTEM_M_RST_OUT (1 << 15)
+#define V3_SYSTEM_M_LOCK (1 << 14)
/* PCI_CFG bits */
-#define V3_PCI_CFG_M_RETRY_EN (1 << 10)
-#define V3_PCI_CFG_M_AD_LOW1 (1 << 9)
-#define V3_PCI_CFG_M_AD_LOW0 (1 << 8)
+#define V3_PCI_CFG_M_RETRY_EN (1 << 10)
+#define V3_PCI_CFG_M_AD_LOW1 (1 << 9)
+#define V3_PCI_CFG_M_AD_LOW0 (1 << 8)
/* PCI MAP register bits (PCI -> Local bus) */
-#define V3_PCI_MAP_M_MAP_ADR 0xFFF00000
-#define V3_PCI_MAP_M_RD_POST_INH (1 << 15)
-#define V3_PCI_MAP_M_ROM_SIZE (1 << 11 | 1 << 10)
-#define V3_PCI_MAP_M_SWAP (1 << 9 | 1 << 8)
-#define V3_PCI_MAP_M_ADR_SIZE 0x000000F0
-#define V3_PCI_MAP_M_REG_EN (1 << 1)
-#define V3_PCI_MAP_M_ENABLE (1 << 0)
+#define V3_PCI_MAP_M_MAP_ADR 0xFFF00000
+#define V3_PCI_MAP_M_RD_POST_INH (1 << 15)
+#define V3_PCI_MAP_M_ROM_SIZE (1 << 11 | 1 << 10)
+#define V3_PCI_MAP_M_SWAP (1 << 9 | 1 << 8)
+#define V3_PCI_MAP_M_ADR_SIZE 0x000000F0
+#define V3_PCI_MAP_M_REG_EN (1 << 1)
+#define V3_PCI_MAP_M_ENABLE (1 << 0)
/* 9 => 512M window size */
-#define V3_PCI_MAP_M_ADR_SIZE_512M 0x00000090
+#define V3_PCI_MAP_M_ADR_SIZE_512M 0x00000090
/* A => 1024M window size */
-#define V3_PCI_MAP_M_ADR_SIZE_1024M 0x000000A0
+#define V3_PCI_MAP_M_ADR_SIZE_1024M 0x000000A0
/* LB_BASE register bits (Local bus -> PCI) */
-#define V3_LB_BASE_M_MAP_ADR 0xFFF00000
-#define V3_LB_BASE_M_SWAP (1 << 8 | 1 << 9)
-#define V3_LB_BASE_M_ADR_SIZE 0x000000F0
-#define V3_LB_BASE_M_PREFETCH (1 << 3)
-#define V3_LB_BASE_M_ENABLE (1 << 0)
+#define V3_LB_BASE_M_MAP_ADR 0xFFF00000
+#define V3_LB_BASE_M_SWAP (1 << 8 | 1 << 9)
+#define V3_LB_BASE_M_ADR_SIZE 0x000000F0
+#define V3_LB_BASE_M_PREFETCH (1 << 3)
+#define V3_LB_BASE_M_ENABLE (1 << 0)
/* PCI COMMAND REGISTER bits */
-#define V3_COMMAND_M_FBB_EN (1 << 9)
-#define V3_COMMAND_M_SERR_EN (1 << 8)
-#define V3_COMMAND_M_PAR_EN (1 << 6)
-#define V3_COMMAND_M_MASTER_EN (1 << 2)
-#define V3_COMMAND_M_MEM_EN (1 << 1)
-#define V3_COMMAND_M_IO_EN (1 << 0)
+#define V3_COMMAND_M_FBB_EN (1 << 9)
+#define V3_COMMAND_M_SERR_EN (1 << 8)
+#define V3_COMMAND_M_PAR_EN (1 << 6)
+#define V3_COMMAND_M_MASTER_EN (1 << 2)
+#define V3_COMMAND_M_MEM_EN (1 << 1)
+#define V3_COMMAND_M_IO_EN (1 << 0)
#define INTEGRATOR_SC_BASE 0x11000000
#define INTEGRATOR_SC_PCIENABLE_OFFSET 0x18
@@ -280,38 +280,37 @@
/* CM registers common to all integrator/CP CMs */
#define OS_CTRL 0x0000000C
-#define CMMASK_REMAP 0x00000005 /* Set remap & led */
+#define CMMASK_REMAP 0x00000005 /* Set remap & led */
#define CMMASK_RESET 0x00000008
#define OS_LOCK 0x00000014
-#define CMVAL_LOCK 0x0000A000 /* Locking value */
-#define CMMASK_LOCK 0x0000005F /* Locking value */
+#define CMVAL_LOCK 0x0000A000 /* Locking value */
+#define CMMASK_LOCK 0x0000005F /* Locking value */
#define CMVAL_UNLOCK 0x00000000 /* Any value != CM_LOCKVAL */
#define OS_SDRAM 0x00000020
#define OS_INIT 0x00000024
#define CMMASK_MAP_SIMPLE 0xFFFDFFFF /* simple mapping */
#define CMMASK_TCRAM_DISABLE 0xFFFEFFFF /* TCRAM disabled */
-#define CMMASK_LOWVEC 0x00000004 /* vectors @ 0x00000000 */
+#define CMMASK_LOWVEC 0x00000004 /* vectors @ 0x00000000 */
#ifdef CONFIG_CM_SPD_DETECT
#define OS_SPD 0x00000100 /* The SDRAM SPD data is copied here */
#endif
#if defined (CONFIG_CM10200E) || defined (CONFIG_CM10220E)
-#define CMMASK_INIT_102 0x00000300 /* see CM102xx ref manual
- * - PLL test clock bypassed
- * - bus clock ratio 2
- * - little endian
- * - vectors at zero
- */
+#define CMMASK_INIT_102 0x00000300 /* see CM102xx ref manual
+ * - PLL test clock bypassed
+ * - bus clock ratio 2
+ * - little endian
+ * - vectors at zero
+ */
#endif /* CM1022xx */
-#define CMMASK_LE 0x00000008 /* little endian */
+#define CMMASK_LE 0x00000008 /* little endian */
#define CMMASK_CMxx6_COMMON 0x00000100 /* Common value for CMxx6
- * - divisor/ratio b00000001
- * bx
- * - HCLKDIV b000
- * bxx
- * - PLL BYPASS b00
- */
-#endif /* __CONFIG_H */
-
+ * - divisor/ratio b00000001
+ * bx
+ * - HCLKDIV b000
+ * bxx
+ * - PLL BYPASS b00
+ */
+#endif /* __CONFIG_H */
diff --git a/include/configs/omap2420h4.h b/include/configs/omap2420h4.h
index 5674e20..12252ac 100644
--- a/include/configs/omap2420h4.h
+++ b/include/configs/omap2420h4.h
@@ -40,7 +40,7 @@
/* Clock config to target*/
#define PRCM_CONFIG_II 1
-//#define PRCM_CONFIG_III 1
+/* #define PRCM_CONFIG_III 1 */
#include <asm/arch/omap2420.h> /* get chip and board defs */
@@ -157,7 +157,6 @@
#define NAND_WP_OFF() do {*(volatile u32 *)(0x6800A050) |= 0x00000010;} while(0)
#define NAND_WP_ON() do {*(volatile u32 *)(0x6800A050) &= ~0x00000010;} while(0)
-
#define NAND_CTL_CLRALE(nandptr)
#define NAND_CTL_SETALE(nandptr)
#define NAND_CTL_CLRCLE(nandptr)
@@ -165,7 +164,6 @@
#define NAND_DISABLE_CE(nand)
#define NAND_ENABLE_CE(nand)
-
#define CONFIG_BOOTDELAY 3
#ifdef NFS_BOOT_DEFAULTS
@@ -261,9 +259,6 @@
#define CFG_ENV_OFFSET ( CFG_MONITOR_BASE + CFG_MONITOR_LEN ) /* Environment after Monitor */
#endif
-
-
-
/*-----------------------------------------------------------------------
* CFI FLASH driver setup
*/