summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/powerpc/cpu/mpc85xx/cpu_init_early.c58
-rw-r--r--arch/powerpc/cpu/mpc85xx/start.S234
2 files changed, 234 insertions, 58 deletions
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
index 32aa94b..64eda94 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c
@@ -24,51 +24,6 @@
DECLARE_GLOBAL_DATA_PTR;
-#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR_PHYS)
-#ifdef CONFIG_FSL_CORENET
-static void setup_ccsrbar(void)
-{
- u32 temp;
- volatile u32 *ccsr_virt = (volatile u32 *)(CONFIG_SYS_CCSRBAR + 0x1000);
- volatile ccsr_local_t *ccm;
-
- /*
- * We can't call set_law() because we haven't moved
- * CCSR yet.
- */
- ccm = (void *)ccsr_virt;
-
- out_be32(&ccm->law[0].lawbarh,
- (u64)CONFIG_SYS_CCSRBAR_PHYS >> 32);
- out_be32(&ccm->law[0].lawbarl, (u32)CONFIG_SYS_CCSRBAR_PHYS);
- out_be32(&ccm->law[0].lawar,
- LAW_EN | (0x1e << 20) | LAW_SIZE_4K);
-
- in_be32((u32 *)(ccsr_virt + 0));
- in_be32((u32 *)(ccsr_virt + 1));
- isync();
-
- ccm = (void *)CONFIG_SYS_CCSRBAR;
- /* Now use the temporary LAW to move CCSR */
- out_be32(&ccm->ccsrbarh, (u64)CONFIG_SYS_CCSRBAR_PHYS >> 32);
- out_be32(&ccm->ccsrbarl, (u32)CONFIG_SYS_CCSRBAR_PHYS);
- out_be32(&ccm->ccsrar, CCSRAR_C);
- temp = in_be32(&ccm->ccsrar);
- disable_law(0);
-}
-#else
-static void setup_ccsrbar(void)
-{
- u32 temp;
- volatile u32 *ccsr_virt = (volatile u32 *)(CONFIG_SYS_CCSRBAR + 0x1000);
-
- temp = in_be32(ccsr_virt);
- out_be32(ccsr_virt, CONFIG_SYS_CCSRBAR_PHYS >> 12);
- temp = in_be32((volatile u32 *)CONFIG_SYS_CCSRBAR);
-}
-#endif
-#endif
-
/* We run cpu_init_early_f in AS = 1 */
void cpu_init_early_f(void)
{
@@ -93,19 +48,6 @@ void cpu_init_early_f(void)
write_tlb(mas0, mas1, mas2, mas3, mas7);
- /* set up CCSR if we want it moved */
-#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR_PHYS)
- mas0 = MAS0_TLBSEL(0) | MAS0_ESEL(1);
- /* mas1 is the same as above */
- mas2 = FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, MAS2_I|MAS2_G);
- mas3 = FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_DEFAULT, 0, MAS3_SW|MAS3_SR);
- mas7 = FSL_BOOKE_MAS7(CONFIG_SYS_CCSRBAR_DEFAULT);
-
- write_tlb(mas0, mas1, mas2, mas3, mas7);
-
- setup_ccsrbar();
-#endif
-
init_laws();
invalidate_tlb(0);
init_tlbs();
diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S
index 878a3d6..d89d18c 100644
--- a/arch/powerpc/cpu/mpc85xx/start.S
+++ b/arch/powerpc/cpu/mpc85xx/start.S
@@ -279,6 +279,240 @@ _start_e500:
#endif /* CONFIG_MPC8569 */
+/*
+ * Relocate CCSR, if necessary. We relocate CCSR if (obviously) the default
+ * location is not where we want it. This typically happens on a 36-bit
+ * system, where we want to move CCSR to near the top of 36-bit address space.
+ *
+ * To move CCSR, we create two temporary TLBs, one for the old location, and
+ * another for the new location. On CoreNet systems, we also need to create
+ * a special, temporary LAW.
+ *
+ * As a general rule, TLB0 is used for short-term TLBs, and TLB1 is used for
+ * long-term TLBs, so we use TLB0 here.
+ */
+#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR_PHYS)
+
+#if !defined(CONFIG_SYS_CCSRBAR_PHYS_HIGH) || !defined(CONFIG_SYS_CCSRBAR_PHYS_LOW)
+#error "CONFIG_SYS_CCSRBAR_PHYS_HIGH and CONFIG_SYS_CCSRBAR_PHYS_LOW) must be defined."
+#endif
+
+purge_old_ccsr_tlb:
+ lis r8, CONFIG_SYS_CCSRBAR@h
+ ori r8, r8, CONFIG_SYS_CCSRBAR@l
+ lis r9, (CONFIG_SYS_CCSRBAR + 0x1000)@h
+ ori r9, r9, (CONFIG_SYS_CCSRBAR + 0x1000)@l
+
+ /*
+ * In a multi-stage boot (e.g. NAND boot), a previous stage may have
+ * created a TLB for CCSR, which will interfere with our relocation
+ * code. Since we're going to create a new TLB for CCSR anyway,
+ * it should be safe to delete this old TLB here. We have to search
+ * for it, though.
+ */
+
+ li r1, 0
+ mtspr MAS6, r1 /* Search the current address space and PID */
+ tlbsx 0, r8
+ mfspr r1, MAS1
+ andis. r2, r1, MAS1_VALID@h /* Check for the Valid bit */
+ beq 1f /* Skip if no TLB found */
+
+ rlwinm r1, r1, 0, 1, 31 /* Clear Valid bit */
+ mtspr MAS1, r1
+ tlbwe
+1:
+
+create_ccsr_new_tlb:
+ /*
+ * Create a TLB for the new location of CCSR. Register R8 is reserved
+ * for the virtual address of this TLB (CONFIG_SYS_CCSRBAR).
+ */
+ lis r0, FSL_BOOKE_MAS0(0, 0, 0)@h
+ ori r0, r0, FSL_BOOKE_MAS0(0, 0, 0)@l
+ lis r1, FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@h
+ ori r1, r1, FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@l
+ lis r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@h
+ ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@l
+ lis r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_PHYS_LOW, 0, (MAS3_SW|MAS3_SR))@h
+ ori r3, r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_PHYS_LOW, 0, (MAS3_SW|MAS3_SR))@l
+ lis r7, CONFIG_SYS_CCSRBAR_PHYS_HIGH@h
+ ori r7, r7, CONFIG_SYS_CCSRBAR_PHYS_HIGH@l
+ mtspr MAS0, r0
+ mtspr MAS1, r1
+ mtspr MAS2, r2
+ mtspr MAS3, r3
+ mtspr MAS7, r7
+ isync
+ msync
+ tlbwe
+
+ /*
+ * Create a TLB for the old location of CCSR. Register R9 is reserved
+ * for the virtual address of this TLB (CONFIG_SYS_CCSRBAR + 0x1000).
+ */
+create_ccsr_old_tlb:
+ lis r0, FSL_BOOKE_MAS0(0, 1, 0)@h
+ ori r0, r0, FSL_BOOKE_MAS0(0, 1, 0)@l
+ lis r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@h
+ ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@l
+ lis r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_DEFAULT, 0, (MAS3_SW|MAS3_SR))@h
+ ori r3, r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_DEFAULT, 0, (MAS3_SW|MAS3_SR))@l
+ li r7, 0 /* The default CCSR address is always a 32-bit number */
+ mtspr MAS0, r0
+ /* MAS1 is the same as above */
+ mtspr MAS2, r2
+ mtspr MAS3, r3
+ mtspr MAS7, r7
+ isync
+ msync
+ tlbwe
+
+#ifdef CONFIG_FSL_CORENET
+
+#define CCSR_LAWBARH0 (CONFIG_SYS_CCSRBAR + 0x1000)
+#define LAW_EN 0x80000000
+#define LAW_SIZE_4K 0xb
+#define CCSRBAR_LAWAR (LAW_EN | (0x1e << 20) | LAW_SIZE_4K)
+#define CCSRAR_C 0x80000000 /* Commit */
+
+create_temp_law:
+ /*
+ * On CoreNet systems, we create the temporary LAW using a special LAW
+ * target ID of 0x1e. LAWBARH is at offset 0xc00 in CCSR.
+ */
+ lis r0, CONFIG_SYS_CCSRBAR_PHYS_HIGH@h
+ ori r0, r0, CONFIG_SYS_CCSRBAR_PHYS_HIGH@l
+ lis r1, CONFIG_SYS_CCSRBAR_PHYS_LOW@h
+ ori r1, r1, CONFIG_SYS_CCSRBAR_PHYS_LOW@l
+ lis r2, CCSRBAR_LAWAR@h
+ ori r2, r2, CCSRBAR_LAWAR@l
+
+ stw r0, 0xc00(r9) /* LAWBARH0 */
+ stw r1, 0xc04(r9) /* LAWBARL0 */
+ sync
+ stw r2, 0xc08(r9) /* LAWAR0 */
+
+ /*
+ * Read back from LAWAR to ensure the update is complete. e500mc
+ * cores also require an isync.
+ */
+ lwz r0, 0xc08(r9) /* LAWAR0 */
+ isync
+
+ /*
+ * Read the current CCSRBARH and CCSRBARL using load word instructions.
+ * Follow this with an isync instruction. This forces any outstanding
+ * accesses to configuration space to completion.
+ */
+read_old_ccsrbar:
+ lwz r0, 0(r9) /* CCSRBARH */
+ lwz r0, 4(r9) /* CCSRBARH */
+ isync
+
+ /*
+ * Write the new values for CCSRBARH and CCSRBARL to their old
+ * locations. The CCSRBARH has a shadow register. When the CCSRBARH
+ * has a new value written it loads a CCSRBARH shadow register. When
+ * the CCSRBARL is written, the CCSRBARH shadow register contents
+ * along with the CCSRBARL value are loaded into the CCSRBARH and
+ * CCSRBARL registers, respectively. Follow this with a sync
+ * instruction.
+ */
+write_new_ccsrbar:
+ lis r0, CONFIG_SYS_CCSRBAR_PHYS_HIGH@h
+ ori r0, r0, CONFIG_SYS_CCSRBAR_PHYS_HIGH@l
+ lis r1, CONFIG_SYS_CCSRBAR_PHYS_LOW@h
+ ori r1, r1, CONFIG_SYS_CCSRBAR_PHYS_LOW@l
+ lis r2, CCSRAR_C@h
+ ori r2, r2, CCSRAR_C@l
+
+ stw r0, 0(r9) /* Write to CCSRBARH */
+ sync /* Make sure we write to CCSRBARH first */
+ stw r1, 4(r9) /* Write to CCSRBARL */
+ sync
+
+ /*
+ * Write a 1 to the commit bit (C) of CCSRAR at the old location.
+ * Follow this with a sync instruction.
+ */
+ stw r2, 8(r9)
+ sync
+
+ /* Delete the temporary LAW */
+delete_temp_law:
+ li r1, 0
+ stw r1, 0xc08(r8)
+ sync
+ stw r1, 0xc00(r8)
+ stw r1, 0xc04(r8)
+ sync
+
+#else /* #ifdef CONFIG_FSL_CORENET */
+
+write_new_ccsrbar:
+ /*
+ * Read the current value of CCSRBAR using a load word instruction
+ * followed by an isync. This forces all accesses to configuration
+ * space to complete.
+ */
+ sync
+ lwz r0, 0(r9)
+ isync
+
+/* CONFIG_SYS_CCSRBAR_PHYS right shifted by 12 */
+#define CCSRBAR_PHYS_RS12 ((CONFIG_SYS_CCSRBAR_PHYS_HIGH << 20) | \
+ (CONFIG_SYS_CCSRBAR_PHYS_LOW >> 12))
+
+ /* Write the new value to CCSRBAR. */
+ lis r0, CCSRBAR_PHYS_RS12@h
+ ori r0, r0, CCSRBAR_PHYS_RS12@l
+ stw r0, 0(r9)
+ sync
+
+ /*
+ * The manual says to perform a load of an address that does not
+ * access configuration space or the on-chip SRAM using an existing TLB,
+ * but that doesn't appear to be necessary. We will do the isync,
+ * though.
+ */
+ isync
+
+ /*
+ * Read the contents of CCSRBAR from its new location, followed by
+ * another isync.
+ */
+ lwz r0, 0(r8)
+ isync
+
+#endif /* #ifdef CONFIG_FSL_CORENET */
+
+ /* Delete the temporary TLBs */
+delete_temp_tlbs:
+ lis r0, FSL_BOOKE_MAS0(0, 0, 0)@h
+ ori r0, r0, FSL_BOOKE_MAS0(0, 0, 0)@l
+ li r1, 0
+ lis r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@h
+ ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@l
+ mtspr MAS0, r0
+ mtspr MAS1, r1
+ mtspr MAS2, r2
+ isync
+ msync
+ tlbwe
+
+ lis r0, FSL_BOOKE_MAS0(0, 1, 0)@h
+ ori r0, r0, FSL_BOOKE_MAS0(0, 1, 0)@l
+ lis r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@h
+ ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@l
+ mtspr MAS0, r0
+ mtspr MAS2, r2
+ isync
+ msync
+ tlbwe
+#endif /* #if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR_PHYS) */
+
+create_init_ram_area:
lis r6,FSL_BOOKE_MAS0(1, 15, 0)@h
ori r6,r6,FSL_BOOKE_MAS0(1, 15, 0)@l