summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--CHANGELOG149
-rw-r--r--MAINTAINERS8
-rwxr-xr-xMAKEALL55
-rw-r--r--Makefile1335
-rw-r--r--README55
-rw-r--r--board/AtmarkTechno/suzaku/Makefile18
-rw-r--r--board/BuS/EB+MCF-EV123/Makefile18
-rw-r--r--board/BuS/EB+MCF-EV123/textbase.mk2
-rw-r--r--board/LEOX/elpt860/Makefile19
-rw-r--r--board/MAI/AmigaOneG3SE/Makefile31
-rw-r--r--board/Marvell/db64360/Makefile22
-rw-r--r--board/Marvell/db64460/Makefile22
-rw-r--r--board/RPXClassic/Makefile18
-rw-r--r--board/RPXlite/Makefile18
-rw-r--r--board/RPXlite_dw/Makefile18
-rw-r--r--board/RRvision/Makefile18
-rw-r--r--board/a3000/Makefile18
-rw-r--r--board/adder/Makefile19
-rw-r--r--board/adsvix/Makefile19
-rw-r--r--board/alaska/Makefile19
-rw-r--r--board/altera/dk1c20/Makefile21
-rw-r--r--board/altera/dk1s10/Makefile21
-rw-r--r--board/altera/ep1c20/Makefile25
-rw-r--r--board/altera/ep1s10/Makefile25
-rw-r--r--board/altera/ep1s40/Makefile25
-rw-r--r--board/amcc/bamboo/Makefile17
-rw-r--r--board/amcc/bubinga/Makefile16
-rw-r--r--board/amcc/common/flash.c60
-rw-r--r--board/amcc/ebony/Makefile16
-rw-r--r--board/amcc/luan/Makefile17
-rw-r--r--board/amcc/ocotea/Makefile16
-rw-r--r--board/amcc/sequoia/Makefile52
-rw-r--r--board/amcc/sequoia/config.mk41
-rw-r--r--board/amcc/sequoia/init.S157
-rw-r--r--board/amcc/sequoia/sdram.c83
-rw-r--r--board/amcc/sequoia/sequoia.c560
-rw-r--r--board/amcc/sequoia/sequoia.h67
-rw-r--r--board/amcc/sequoia/u-boot-nand.lds137
-rw-r--r--board/amcc/sequoia/u-boot.lds145
-rw-r--r--board/amcc/walnut/Makefile16
-rw-r--r--board/amcc/yellowstone/Makefile16
-rw-r--r--board/amcc/yosemite/Makefile16
-rw-r--r--board/amcc/yucca/Makefile16
-rw-r--r--board/amcc/yucca/yucca.c105
-rw-r--r--board/amcc/yucca/yucca.h3
-rw-r--r--board/amirix/ap1000/Makefile16
-rw-r--r--board/armadillo/Makefile19
-rw-r--r--board/assabet/Makefile18
-rw-r--r--board/at91rm9200dk/Makefile18
-rw-r--r--board/atc/Makefile18
-rw-r--r--board/barco/Makefile18
-rw-r--r--board/bc3450/Makefile18
-rw-r--r--board/bmw/Makefile19
-rw-r--r--board/c2mon/Makefile18
-rw-r--r--board/canmb/Makefile21
-rw-r--r--board/cds/mpc8541cds/Makefile21
-rw-r--r--board/cds/mpc8548cds/Makefile21
-rw-r--r--board/cds/mpc8555cds/Makefile21
-rw-r--r--board/cerf250/Makefile18
-rw-r--r--board/cm4008/Makefile20
-rw-r--r--board/cm41xx/Makefile20
-rw-r--r--board/cmc_pu2/Makefile18
-rw-r--r--board/cmi/Makefile21
-rw-r--r--board/cobra5272/Makefile18
-rw-r--r--board/cogent/Makefile19
-rw-r--r--board/cpc45/Makefile18
-rw-r--r--board/cpu86/Makefile18
-rw-r--r--board/cpu87/Makefile18
-rw-r--r--board/cpu87/cpu87.c8
-rw-r--r--board/cradle/Makefile18
-rw-r--r--board/cray/L1/Makefile30
-rw-r--r--board/csb226/Makefile18
-rw-r--r--board/csb272/Makefile19
-rw-r--r--board/csb472/Makefile19
-rw-r--r--board/csb637/Makefile18
-rw-r--r--board/cu824/Makefile18
-rw-r--r--board/dave/B2/Makefile19
-rw-r--r--board/dave/PPChameleonEVB/Makefile16
-rw-r--r--board/dbau1x00/Makefile18
-rw-r--r--board/delta/Makefile18
-rw-r--r--board/dnp1110/Makefile18
-rw-r--r--board/eXalion/Makefile21
-rw-r--r--board/eltec/bab7xx/Makefile18
-rw-r--r--board/eltec/elppc/Makefile20
-rw-r--r--board/eltec/mhpc/Makefile18
-rw-r--r--board/emk/top5200/Makefile21
-rw-r--r--board/emk/top860/Makefile21
-rw-r--r--board/ep7312/Makefile19
-rw-r--r--board/ep8248/Makefile18
-rw-r--r--board/ep8260/Makefile18
-rw-r--r--board/ep88x/Makefile19
-rw-r--r--board/eric/Makefile16
-rw-r--r--board/esd/adciop/Makefile19
-rw-r--r--board/esd/apc405/Makefile19
-rw-r--r--board/esd/ar405/Makefile19
-rw-r--r--board/esd/ash405/Makefile19
-rw-r--r--board/esd/canbt/Makefile19
-rw-r--r--board/esd/cms700/Makefile19
-rw-r--r--board/esd/cpci2dp/Makefile19
-rw-r--r--board/esd/cpci405/Makefile19
-rw-r--r--board/esd/cpci440/Makefile19
-rw-r--r--board/esd/cpci5200/Makefile24
-rw-r--r--board/esd/cpci5200/config.mk2
-rw-r--r--board/esd/cpci750/Makefile22
-rw-r--r--board/esd/cpciiser4/Makefile19
-rw-r--r--board/esd/dasa_sim/Makefile19
-rw-r--r--board/esd/dp405/Makefile19
-rw-r--r--board/esd/du405/Makefile19
-rw-r--r--board/esd/hh405/Makefile19
-rw-r--r--board/esd/hub405/Makefile19
-rw-r--r--board/esd/ocrtc/Makefile19
-rw-r--r--board/esd/pci405/Makefile19
-rw-r--r--board/esd/pf5200/Makefile23
-rw-r--r--board/esd/pf5200/config.mk2
-rw-r--r--board/esd/plu405/Makefile19
-rw-r--r--board/esd/pmc405/Makefile19
-rw-r--r--board/esd/tasreg/Makefile18
-rw-r--r--board/esd/voh405/Makefile19
-rw-r--r--board/esd/vom405/Makefile19
-rw-r--r--board/esd/wuh405/Makefile19
-rw-r--r--board/esteem192e/Makefile18
-rw-r--r--board/etin/debris/Makefile18
-rw-r--r--board/etin/kvme080/Makefile16
-rw-r--r--board/etx094/Makefile18
-rw-r--r--board/evb4510/Makefile20
-rw-r--r--board/evb64260/Makefile18
-rw-r--r--board/exbitgen/Makefile15
-rw-r--r--board/ezkit533/Makefile18
-rw-r--r--board/fads/Makefile18
-rw-r--r--board/flagadm/Makefile18
-rw-r--r--board/funkwerk/vovpn-gw/Makefile18
-rw-r--r--board/g2000/Makefile16
-rw-r--r--board/gcplus/Makefile18
-rw-r--r--board/gen860t/Makefile18
-rw-r--r--board/genietv/Makefile18
-rw-r--r--board/gth/Makefile18
-rw-r--r--board/gth2/Makefile18
-rw-r--r--board/gw8260/Makefile18
-rw-r--r--board/hermes/Makefile18
-rw-r--r--board/hidden_dragon/Makefile18
-rw-r--r--board/hmi1001/Makefile18
-rw-r--r--board/hymod/Makefile18
-rw-r--r--board/icecube/Makefile18
-rw-r--r--board/icecube/config.mk2
-rw-r--r--board/icu862/Makefile18
-rw-r--r--board/ids8247/Makefile19
-rw-r--r--board/impa7/Makefile18
-rw-r--r--board/incaip/Makefile18
-rw-r--r--board/inka4x0/Makefile18
-rw-r--r--board/innokom/Makefile18
-rw-r--r--board/integratorap/Makefile20
-rw-r--r--board/integratorap/config.mk6
-rwxr-xr-xboard/integratorap/split_by_variant.sh9
-rw-r--r--board/integratorcp/Makefile20
-rw-r--r--board/integratorcp/config.mk6
-rwxr-xr-xboard/integratorcp/split_by_variant.sh9
-rw-r--r--board/ip860/Makefile18
-rw-r--r--board/iphase4539/Makefile19
-rw-r--r--board/ispan/Makefile19
-rw-r--r--board/ivm/Makefile18
-rw-r--r--board/ixdp425/Makefile20
-rw-r--r--board/ixdp425/config.mk2
-rw-r--r--board/jse/Makefile17
-rw-r--r--board/kb9202/Makefile20
-rw-r--r--board/kup/Makefile18
-rw-r--r--board/kup/kup4k/Makefile21
-rw-r--r--board/kup/kup4x/Makefile21
-rw-r--r--board/lantec/Makefile18
-rw-r--r--board/lart/Makefile18
-rw-r--r--board/logodl/Makefile20
-rw-r--r--board/lpd7a40x/Makefile18
-rw-r--r--board/lubbock/Makefile18
-rw-r--r--board/lwmon/Makefile18
-rw-r--r--board/m5271evb/Makefile16
-rw-r--r--board/m5272c3/Makefile18
-rw-r--r--board/m5282evb/Makefile18
-rw-r--r--board/mbx8xx/Makefile18
-rw-r--r--board/mcc200/Makefile16
-rw-r--r--board/mcc200/config.mk4
-rw-r--r--board/mcc200/lcd.c190
-rw-r--r--board/mcc200/mcc200.c12
-rw-r--r--board/ml2/Makefile16
-rw-r--r--board/modnet50/Makefile20
-rw-r--r--board/mousse/Makefile17
-rw-r--r--board/mp2usb/Makefile20
-rw-r--r--board/mpc8260ads/Makefile18
-rw-r--r--board/mpc8260ads/config.mk2
-rw-r--r--board/mpc8266ads/Makefile18
-rw-r--r--board/mpc8349emds/Makefile16
-rw-r--r--board/mpc8540ads/Makefile18
-rw-r--r--board/mpc8540eval/Makefile20
-rw-r--r--board/mpc8560ads/Makefile18
-rw-r--r--board/mpl/mip405/Makefile19
-rw-r--r--board/mpl/pati/Makefile24
-rw-r--r--board/mpl/pip405/Makefile19
-rw-r--r--board/mpl/vcma9/Makefile23
-rw-r--r--board/musenki/Makefile19
-rw-r--r--board/mvblue/Makefile19
-rw-r--r--board/mvs1/Makefile18
-rw-r--r--board/mx1ads/Makefile19
-rw-r--r--board/mx1fs2/Makefile20
-rw-r--r--board/nc650/Makefile18
-rw-r--r--board/nc650/config.mk2
-rw-r--r--board/netphone/Makefile18
-rw-r--r--board/netstar/Makefile55
-rwxr-xr-xboard/netstar/crcitbin11370 -> 0 bytes
-rw-r--r--board/netta/Makefile18
-rw-r--r--board/netta2/Makefile18
-rw-r--r--board/netvia/Makefile18
-rw-r--r--board/ns9750dev/Makefile18
-rw-r--r--board/nx823/Makefile18
-rw-r--r--board/o2dnt/Makefile18
-rw-r--r--board/omap1510inn/Makefile20
-rw-r--r--board/omap1610inn/Makefile20
-rw-r--r--board/omap2420h4/Makefile20
-rw-r--r--board/omap5912osk/Makefile20
-rw-r--r--board/omap730p2/Makefile20
-rw-r--r--board/oxc/Makefile18
-rw-r--r--board/pb1x00/Makefile18
-rw-r--r--board/pcippc2/Makefile20
-rw-r--r--board/pcs440ep/Makefile14
-rw-r--r--board/pleb2/Makefile18
-rw-r--r--board/pm520/Makefile18
-rw-r--r--board/pm826/Makefile18
-rw-r--r--board/pm826/config.mk2
-rw-r--r--board/pm828/Makefile18
-rw-r--r--board/pm828/config.mk2
-rw-r--r--board/pm854/Makefile18
-rw-r--r--board/pm856/Makefile18
-rw-r--r--board/pn62/Makefile18
-rw-r--r--board/ppmc7xx/Makefile19
-rw-r--r--board/ppmc8260/Makefile18
-rw-r--r--board/prodrive/alpr/Makefile14
-rw-r--r--board/prodrive/p3p440/Makefile16
-rw-r--r--board/prodrive/pdnb3/Makefile18
-rw-r--r--board/prodrive/pdnb3/config.mk2
-rw-r--r--board/psyent/pci5441/Makefile25
-rw-r--r--board/psyent/pk1c20/Makefile25
-rw-r--r--board/purple/Makefile18
-rw-r--r--board/pxa255_idp/Makefile18
-rw-r--r--board/quantum/Makefile17
-rw-r--r--board/r360mpi/Makefile18
-rw-r--r--board/r5200/Makefile18
-rw-r--r--board/rattler/Makefile18
-rw-r--r--board/rbc823/Makefile18
-rw-r--r--board/rmu/Makefile18
-rw-r--r--board/rpxsuper/Makefile18
-rw-r--r--board/rsdproto/Makefile22
-rw-r--r--board/sacsng/Makefile18
-rw-r--r--board/sandburst/karef/Makefile19
-rw-r--r--board/sandburst/metrobox/Makefile19
-rw-r--r--board/sandpoint/Makefile18
-rw-r--r--board/sbc2410x/Makefile18
-rw-r--r--board/sbc405/Makefile16
-rw-r--r--board/sbc8240/Makefile18
-rw-r--r--board/sbc8260/Makefile18
-rw-r--r--board/sbc8560/Makefile18
-rw-r--r--board/sc520_cdp/Makefile19
-rw-r--r--board/sc520_spunk/Makefile19
-rw-r--r--board/scb9328/Makefile20
-rw-r--r--board/shannon/Makefile18
-rw-r--r--board/siemens/CCM/Makefile22
-rw-r--r--board/siemens/IAD210/Makefile18
-rw-r--r--board/siemens/SCM/Makefile21
-rw-r--r--board/siemens/pcu_e/Makefile18
-rw-r--r--board/sixnet/Makefile18
-rw-r--r--board/sl8245/Makefile18
-rw-r--r--board/smdk2400/Makefile18
-rw-r--r--board/smdk2410/Makefile18
-rw-r--r--board/snmc/qs850/Makefile18
-rw-r--r--board/snmc/qs860t/Makefile18
-rw-r--r--board/sorcery/Makefile19
-rw-r--r--board/sorcery/sorcery.c2
-rw-r--r--board/spc1920/Makefile18
-rw-r--r--board/spd8xx/Makefile18
-rw-r--r--board/ssv/adnpesc1/Makefile21
-rw-r--r--board/stamp/Makefile21
-rw-r--r--board/stxgp3/Makefile18
-rw-r--r--board/stxxtc/Makefile22
-rw-r--r--board/svm_sc8xx/Makefile18
-rw-r--r--board/sx1/Makefile20
-rw-r--r--board/tb0229/Makefile18
-rw-r--r--board/total5200/Makefile18
-rw-r--r--board/total5200/config.mk2
-rw-r--r--board/tqm5200/Makefile18
-rwxr-xr-xboard/tqm5200/cmd_stk52xx.c27
-rw-r--r--board/tqm5200/config.mk2
-rw-r--r--board/tqm5200/tqm5200.c80
-rw-r--r--board/tqm8260/Makefile21
-rw-r--r--board/tqm834x/Makefile19
-rw-r--r--board/tqm85xx/Makefile20
-rw-r--r--board/tqm8xx/Makefile18
-rw-r--r--board/trab/Makefile36
-rw-r--r--board/trab/config.mk2
-rw-r--r--board/uc100/Makefile20
-rw-r--r--board/utx8245/Makefile18
-rw-r--r--board/v37/Makefile18
-rw-r--r--board/versatile/Makefile20
-rwxr-xr-xboard/versatile/split_by_variant.sh12
-rw-r--r--board/voiceblue/Makefile36
-rw-r--r--board/voiceblue/config.mk2
-rw-r--r--board/w7o/Makefile17
-rw-r--r--board/wepep250/Makefile18
-rw-r--r--board/westel/amx860/Makefile18
-rw-r--r--board/xaeniax/Makefile18
-rw-r--r--board/xilinx/ml300/Makefile26
-rw-r--r--board/xm250/Makefile20
-rw-r--r--board/xpedite1k/Makefile17
-rw-r--r--board/xsengine/Makefile18
-rw-r--r--board/zpc1900/Makefile18
-rw-r--r--board/zylonite/Makefile19
-rw-r--r--board/zylonite/config.mk2
-rw-r--r--common/Makefile23
-rw-r--r--common/altera.c8
-rw-r--r--common/cmd_bdinfo.c6
-rw-r--r--common/cmd_jffs2.c2
-rw-r--r--common/env_nand.c50
-rw-r--r--common/environment.c3
-rw-r--r--common/exports.c7
-rw-r--r--common/fpga.c8
-rw-r--r--common/lcd.c28
-rw-r--r--common/serial.c28
-rw-r--r--common/usb_storage.c25
-rw-r--r--common/xyzModem.c993
-rw-r--r--config.mk49
-rw-r--r--cpu/74xx_7xx/Makefile23
-rw-r--r--cpu/arm1136/Makefile18
-rw-r--r--cpu/arm720t/Makefile18
-rw-r--r--cpu/arm920t/Makefile18
-rw-r--r--cpu/arm920t/at91rm9200/Makefile21
-rw-r--r--cpu/arm920t/imx/Makefile17
-rw-r--r--cpu/arm920t/ks8695/Makefile21
-rw-r--r--cpu/arm920t/s3c24x0/Makefile17
-rw-r--r--cpu/arm925t/Makefile18
-rw-r--r--cpu/arm926ejs/Makefile18
-rw-r--r--cpu/arm926ejs/omap/Makefile22
-rw-r--r--cpu/arm926ejs/versatile/Makefile22
-rw-r--r--cpu/arm946es/Makefile18
-rw-r--r--cpu/arm_intcm/Makefile18
-rw-r--r--cpu/bf533/Makefile18
-rw-r--r--cpu/i386/Makefile23
-rw-r--r--cpu/i386/sc520.c18
-rw-r--r--cpu/i386/sc520_asm.S52
-rw-r--r--cpu/ixp/Makefile18
-rw-r--r--cpu/ixp/npe/Makefile23
-rw-r--r--cpu/lh7a40x/Makefile18
-rw-r--r--cpu/mcf52x2/Makefile18
-rw-r--r--cpu/mcf52x2/fec.c1
-rw-r--r--cpu/mcf52x2/start.S2
-rw-r--r--cpu/microblaze/Makefile18
-rw-r--r--cpu/mips/Makefile22
-rw-r--r--cpu/mpc5xx/Makefile21
-rw-r--r--cpu/mpc5xxx/Makefile22
-rw-r--r--cpu/mpc5xxx/interrupts.c292
-rw-r--r--cpu/mpc5xxx/serial.c56
-rw-r--r--cpu/mpc8220/Makefile22
-rw-r--r--cpu/mpc8220/pci.c2
-rw-r--r--cpu/mpc824x/Makefile31
-rw-r--r--cpu/mpc824x/drivers/dma/Makefile83
-rw-r--r--cpu/mpc824x/drivers/dma/Makefile_pc89
-rw-r--r--cpu/mpc824x/drivers/dma/README100
-rw-r--r--cpu/mpc824x/drivers/dma/dma.h326
-rw-r--r--cpu/mpc824x/drivers/dma/dma1.c801
-rw-r--r--cpu/mpc824x/drivers/dma/dma2.S42
-rw-r--r--cpu/mpc824x/drivers/dma/dma_export.h100
-rw-r--r--cpu/mpc824x/drivers/dma_export.h100
-rw-r--r--cpu/mpc824x/drivers/i2o.h344
-rw-r--r--cpu/mpc824x/drivers/i2o/Makefile84
-rw-r--r--cpu/mpc824x/drivers/i2o/Makefile_pc90
-rw-r--r--cpu/mpc824x/drivers/i2o/i2o.h345
-rw-r--r--cpu/mpc824x/drivers/i2o/i2o1.c890
-rw-r--r--cpu/mpc824x/drivers/i2o/i2o2.S47
-rw-r--r--cpu/mpc8260/Makefile20
-rw-r--r--cpu/mpc83xx/Makefile30
-rw-r--r--cpu/mpc85xx/Makefile18
-rw-r--r--cpu/mpc8xx/Makefile22
-rw-r--r--cpu/nios/Makefile24
-rw-r--r--cpu/nios2/Makefile24
-rw-r--r--cpu/ppc4xx/405gp_pci.c3
-rw-r--r--cpu/ppc4xx/440spe_pcie.c418
-rw-r--r--cpu/ppc4xx/440spe_pcie.h11
-rw-r--r--cpu/ppc4xx/4xx_enet.c169
-rw-r--r--cpu/ppc4xx/Makefile20
-rw-r--r--cpu/ppc4xx/cpu.c109
-rw-r--r--cpu/ppc4xx/interrupts.c57
-rw-r--r--cpu/ppc4xx/miiphy.c14
-rw-r--r--cpu/ppc4xx/ndfc.c175
-rw-r--r--cpu/ppc4xx/serial.c263
-rw-r--r--cpu/ppc4xx/speed.c3
-rw-r--r--cpu/ppc4xx/start.S128
-rw-r--r--cpu/ppc4xx/usb_ohci.c8
-rw-r--r--cpu/ppc4xx/usbdev.c20
-rw-r--r--cpu/ppc4xx/vecnum.h89
-rw-r--r--cpu/pxa/Makefile18
-rw-r--r--cpu/s3c44b0/Makefile18
-rw-r--r--cpu/sa1100/Makefile18
-rw-r--r--disk/Makefile17
-rw-r--r--doc/README.nand-boot-ppc44060
-rw-r--r--drivers/Makefile17
-rw-r--r--drivers/dm9000x.c3
-rw-r--r--drivers/nand/Makefile41
-rw-r--r--drivers/nand_legacy/Makefile41
-rw-r--r--drivers/ns9750_serial.c4
-rw-r--r--drivers/serial.c111
-rw-r--r--drivers/sk98lin/Makefile26
-rw-r--r--dtt/Makefile18
-rw-r--r--dtt/lm75.c5
-rw-r--r--examples/Makefile48
-rw-r--r--examples/interrupt.c81
-rw-r--r--fs/Makefile4
-rw-r--r--fs/cramfs/Makefile16
-rw-r--r--fs/ext2/Makefile18
-rw-r--r--fs/fat/Makefile15
-rw-r--r--fs/fdos/Makefile17
-rw-r--r--fs/jffs2/Makefile16
-rw-r--r--fs/reiserfs/Makefile18
-rw-r--r--include/405_mal.h2
-rw-r--r--include/440_i2c.h3
-rw-r--r--include/_exports.h3
-rw-r--r--include/asm-ppc/processor.h4
-rw-r--r--include/asm-ppc/u-boot.h3
-rw-r--r--include/common.h8
-rw-r--r--include/configs/CPCI440.h3
-rw-r--r--include/configs/CPU87.h2
-rw-r--r--include/configs/TQM5200.h55
-rw-r--r--include/configs/TQM834x.h19
-rw-r--r--include/configs/bamboo.h1
-rw-r--r--include/configs/mcc200.h125
-rw-r--r--include/configs/pcs440ep.h1
-rw-r--r--include/configs/sequoia.h429
-rw-r--r--include/configs/sorcery.h1
-rw-r--r--include/configs/yellowstone.h3
-rw-r--r--include/configs/yosemite.h1
-rw-r--r--include/configs/yucca.h3
-rw-r--r--include/environment.h4
-rw-r--r--include/exports.h5
-rw-r--r--include/fat.h8
-rw-r--r--include/lcd.h9
-rw-r--r--include/linux/mtd/compat.h2
-rw-r--r--include/linux/mtd/ndfc.h67
-rw-r--r--include/mpc5xxx.h69
-rw-r--r--include/ppc440.h609
-rw-r--r--include/ppc4xx_enet.h22
-rw-r--r--include/ppc_asm.tmpl2
-rw-r--r--include/serial.h7
-rw-r--r--lib_arm/Makefile17
-rw-r--r--lib_blackfin/Makefile18
-rw-r--r--lib_generic/Makefile17
-rw-r--r--lib_i386/Makefile17
-rw-r--r--lib_m68k/Makefile19
-rw-r--r--lib_microblaze/Makefile17
-rw-r--r--lib_mips/Makefile17
-rw-r--r--lib_nios/Makefile17
-rw-r--r--lib_nios2/Makefile17
-rw-r--r--lib_ppc/Makefile17
-rw-r--r--lib_ppc/board.c12
-rwxr-xr-xmkconfig30
-rw-r--r--nand_spl/board/amcc/sequoia/Makefile83
-rw-r--r--nand_spl/board/amcc/sequoia/config.mk49
-rw-r--r--nand_spl/board/amcc/sequoia/u-boot.lds65
-rw-r--r--nand_spl/nand_boot.c177
-rw-r--r--net/Makefile18
-rw-r--r--net/tftp.c2
-rw-r--r--post/Makefile2
-rw-r--r--post/cpu/Makefile2
-rw-r--r--post/rules.mk14
-rw-r--r--rtc/Makefile17
-rw-r--r--rules.mk35
-rw-r--r--tools/Makefile98
-rw-r--r--tools/easylogo/easylogo.c2
-rw-r--r--tools/env/Makefile27
-rw-r--r--tools/gdb/Makefile23
-rw-r--r--tools/mkimage.c2
-rw-r--r--tools/updater/Makefile93
-rw-r--r--tools/updater/flash.c4
-rw-r--r--tools/updater/update.c4
476 files changed, 11265 insertions, 7521 deletions
diff --git a/CHANGELOG b/CHANGELOG
index f01ad9e..e5fa93b 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,9 @@
Changes since U-Boot 1.1.4:
======================================================================
+* Remove compile warnings in fpga code
+ Patch by Stefan Roese, 18 Sep 2006
+
* Add initial support for the ALPR board from Prodrive
NAND needs some additional testing
Patch by Heiko Schocher, 15 Aug 2006
@@ -9,6 +12,152 @@ Changes since U-Boot 1.1.4:
* Add FPGA Altera Cyclone 2 support
Patch by Heiko Schocher, 15 Aug 2006
+* Disable autoboot abort for FO300 when silent mode is enabled
+ (according to S1 switch setting).
+
+* Cleanup examples binaries
+
+* Add support for AMCC Rainier PPX440GRx eval board
+ Patch by Stefan Roese, 13 Sep 2006
+
+* Add NAND environment support for PPC440EPx Sequoia NAND boot config
+ Patch by Stefan Roese, 12 Sep 2006
+
+* Update NAND boot documentation
+ Patch by Stefan Roese, 12 Sep 2006
+
+* Fix alignment problem in "mtdparts" command
+
+* Add documentation on the latest build environment extensions to
+ the README file.
+
+* Remove dead code (i2o and dma) from cpu/mpc824x/drivers/ directory.
+
+* Fix LOG_DIR directory creation error.
+ Add support for automatic creation of BUILD_DIR directory.
+
+* Fix build problem cpu/ppc4xx/ndfc.c
+ Patch by Stefan Roese, 07 Sep 2006
+
+* Fix build problem with CPCI440
+ Patch by Stefan Roese, 07 Sep 2006
+
+* Change Yellowstone to use CFI write buffer
+ Patch by Stefan Roese, 07 Sep 2006
+
+* Add support for AMCC Sequoia PPC440EPx eval board
+ - Add support for PPC440EPx & PPC440GRx
+ - Add support for PPC440EP(x)/GR(x) NAND controller
+ in cpu/ppc4xx directory
+ - Add NAND boot functionality for Sequoia board,
+ please see doc/README.nand-boot-ppc440 for details
+ - This Sequoia NAND image doesn't support environment
+ in NAND for now. This will be added in a short while.
+ Patch by Stefan Roese, 07 Sep 2006
+
+* Fix mkimage -l bug with multifile images on 64bit platforms
+ Patch by David Updegraff, 06 Sep 2006
+
+* Fix build problems on sorcery board.
+
+* Fix coldfire build problems.
+ Patch by Marian Balakowicz, 01 Sep 2006
+
+* Add support for a saving build objects in a separate directory.
+ Modifications are based on the Linux kernel approach and support
+ two use cases:
+ 1) Add O= to the make command line 'make O=/tmp/build all'
+ 2) Set environement variable BUILD_DIR to point to the desired location
+ 'export BUILD_DIR=/tmp/build'
+ 'make'
+ The second approach can also be used with a MAKEALL script
+ 'export BUILD_DIR=/tmp/build'
+ './MAKEALL'
+ Command line 'O=' setting overrides the BUILD_DIR environent variable.
+ When none of the above methods is used the local build is performed
+ and the object files are placed in the source directory.
+
+* Remove the board/netstar/crcit binary from git repository.
+
+* Fix tools/updater build error.
+
+* Fix tools/easylogo build error.
+
+* Fixed problems on PRS200 board caused by adding splash screen on MCC200
+
+* Extended README entry on coding style
+
+* Added another example showing simple interrupt interception.
+
+* Added simple_strtoul(), getenv() and setenv() to the exported functions.
+ Also bumped up ABI version to reflect this change.
+
+* Added interrupt handling capabilities for mpc5xxx processors.
+ Also added Linux like BUG() macros.
+
+* Coding Style cleanup.
+ Patch by Stefano Babic, 31 Aug 2006
+
+* Add splashscreen support for MCC200 board.
+
+* Make the serial driver framework work with CONFIG_SERIAL_MULTI
+ enabled
+
+* PCIe endpoint support for AMCC Yucca 440SPe board
+ Patch by Tirumala R Marri, 26 Aug 2006
+
+* Improve DIMM detection for AMCC Yucca 440SPe board
+ Improved the memory DIMM detection for the Yucca 440SPe board for
+ the case where a memory DIMM is falsely detected as present.
+ This issue is seen on some AMCC Yucca 440SPe validation boards if
+ only one 512MB memory DIMM is installed, i.e. DIMM slot 0 is
+ populated and DIMM slot 1 is empty. In this case, U-Boot does
+ not correctly detect that there is only one DIMM memory module
+ installed and will falsely detect two DIMM memory modules are
+ present and therefore U-Boot will not calculate the correct amount
+ of total memory and u-boot will not booting up.
+ Patch by Adam Graham, 24 Aug 2006
+
+* Fix typo.
+
+* Code cleanup
+
+* Update for MCC200 / PRS200 boards:
+ - auto-adjust console device for Linux.
+ - fix typos.
+
+* Add a fix for a buggy USB device on the FO300 board.
+
+* Updates for MCC200 / PRS200 boards:
+ - support for configurations with SDRAM or DDR memory,
+ - support for highboot and lowboot
+ - adjusting environment definitions
+
+* Add support for WTK FO300 board (TQM5200 based).
+
+* Fix TQM834x hang.
+
+* Update for SC520 board.
+ Patch by David Updegraff, 02 Dec 2005
+
+* Fixed common.h spelling error.
+ Patch by Cory Tusar, 30 Nov 2005
+
+* Fix typo.
+ Patch by Andreas Engel, 28 Nov 2005
+
+* Fix fatload command on FAT32 formatted partitions.
+ Patch by Joachim Jaeger, 18 Nov 2005
+
+* Fix drivers/dm9000.c when configured in 32 bit mode.
+ Patch by Eric Benard, 17 Nov 2005
+
+* Cleanup debug code for yucca board.
+
+* MCC200: restrict addressable flash space to 32 MB
+
+* Add debug console on COM12 for MCC200 board
+
* Fix control-c handing in CONFIG_CMDLINE_EDITING
Properly pass break code back from readline.
Patch by Roger Blofeld, 31 Jul 2006
diff --git a/MAINTAINERS b/MAINTAINERS
index e1baa42..674fba7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -279,12 +279,14 @@ Stefan Roese <sr@denx.de>
TQM85xx MPC8540/8541/8555/8560
+ alpr PPC440GX
bamboo PPC440EP
bunbinga PPC405EP
ebony PPC440GP
ocotea PPC440GX
p3p440 PPC440GP
pcs440ep PPC440EP
+ sequoia PPC440EPx
sycamore PPC405GPr
walnut PPC405GP
yellowstone PPC440GR
@@ -318,6 +320,11 @@ Rune Torgersen <runet@innovsys.com>
MPC8266ADS MPC8266
+
+David Updegraff <dave@cray.com>
+
+ CRAYL1 PPC4xx
+
Josef Wagner <Wagner@Microsys.de>
CPC45 MPC8245
@@ -347,7 +354,6 @@ Unknown / orphaned boards:
RPXClassic MPC8xx
RPXlite MPC8xx
- CRAYL1 PPC4xx
ERIC PPC4xx
MOUSSE MPC824x
diff --git a/MAKEALL b/MAKEALL
index 467a9be..3d5449e 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -8,7 +8,17 @@ else
MAKE=make
fi
-[ -d LOG ] || mkdir LOG || exit 1
+if [ "${MAKEALL_LOGDIR}" ] ; then
+ LOG_DIR=${MAKEALL_LOGDIR}
+else
+ LOG_DIR="LOG"
+fi
+
+if [ ! "${BUILD_DIR}" ] ; then
+ BUILD_DIR="."
+fi
+
+[ -d ${LOG_DIR} ] || mkdir ${LOG_DIR} || exit 1
LIST=""
@@ -25,11 +35,11 @@ LIST_5xx=" \
#########################################################################
LIST_5xxx=" \
- BC3450 cpci5200 EVAL5200 icecube_5100 \
- icecube_5200 lite5200b mcc200 o2dnt \
- pf5200 PM520 TB5200 Total5100 \
- Total5200 Total5200_Rev2 TQM5200 TQM5200_B \
- TQM5200S \
+ BC3450 cpci5200 EVAL5200 fo300 \
+ icecube_5100 icecube_5200 lite5200b mcc200 \
+ o2dnt pf5200 PM520 TB5200 \
+ Total5100 Total5200 Total5200_Rev2 TQM5200 \
+ TQM5200_B TQM5200S \
"
#########################################################################
@@ -64,18 +74,19 @@ LIST_8xx=" \
#########################################################################
LIST_4xx=" \
- ADCIOP AP1000 AR405 ASH405 \
- bubinga CANBT CMS700 CPCI2DP \
- CPCI405 CPCI4052 CPCI405AB CPCI405DT \
- CPCI440 CPCIISER4 CRAYL1 csb272 \
- csb472 DASA_SIM DP405 DU405 \
- ebony ERIC EXBITGEN G2000 \
- HH405 HUB405 JSE KAREF \
- luan METROBOX MIP405 MIP405T \
- ML2 ml300 ocotea OCRTC \
- ORSG p3p440 PCI405 pcs440ep \
- PIP405 PLU405 PMC405 PPChameleonEVB \
- sbc405 VOH405 VOM405 W7OLMC \
+ ADCIOP alpr AP1000 AR405 \
+ ASH405 bamboo bubinga CANBT \
+ CMS700 CPCI2DP CPCI405 CPCI4052 \
+ CPCI405AB CPCI405DT CPCI440 CPCIISER4 \
+ CRAYL1 csb272 csb472 DASA_SIM \
+ DP405 DU405 ebony ERIC \
+ EXBITGEN G2000 HH405 HUB405 \
+ JSE KAREF luan METROBOX \
+ MIP405 MIP405T ML2 ml300 \
+ ocotea OCRTC ORSG p3p440 \
+ PCI405 pcs440ep PIP405 PLU405 \
+ PMC405 PPChameleonEVB sbc405 sequoia \
+ sequoia_nand VOH405 VOM405 W7OLMC \
W7OLMG walnut WUH405 XPEDITE1K \
yellowstone yosemite yucca bamboo \
"
@@ -303,8 +314,12 @@ build_target() {
${MAKE} distclean >/dev/null
${MAKE} ${target}_config
- ${MAKE} ${JOBS} all 2>&1 >LOG/$target.MAKELOG | tee LOG/$target.ERR
- ${CROSS_COMPILE:-ppc_8xx-}size u-boot | tee -a LOG/$target.MAKELOG
+
+ ${MAKE} ${JOBS} all 2>&1 >${LOG_DIR}/$target.MAKELOG \
+ | tee ${LOG_DIR}/$target.ERR
+
+ ${CROSS_COMPILE:-ppc_8xx-}size ${BUILD_DIR}/u-boot \
+ | tee -a ${LOG_DIR}/$target.MAKELOG
}
#-----------------------------------------------------------------------
diff --git a/Makefile b/Makefile
index fc4ffd8..3ffca2f 100644
--- a/Makefile
+++ b/Makefile
@@ -26,7 +26,7 @@ PATCHLEVEL = 1
SUBLEVEL = 4
EXTRAVERSION =
U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
-VERSION_FILE = include/version_autogenerated.h
+VERSION_FILE = $(obj)include/version_autogenerated.h
HOSTARCH := $(shell uname -m | \
sed -e s/i.86/i386/ \
@@ -45,14 +45,78 @@ export HOSTARCH HOSTOS
VENDOR=
#########################################################################
+#
+# U-boot build supports producing a object files to the separate external
+# directory. Two use cases are supported:
+#
+# 1) Add O= to the make command line
+# 'make O=/tmp/build all'
+#
+# 2) Set environement variable BUILD_DIR to point to the desired location
+# 'export BUILD_DIR=/tmp/build'
+# 'make'
+#
+# The second approach can also be used with a MAKEALL script
+# 'export BUILD_DIR=/tmp/build'
+# './MAKEALL'
+#
+# Command line 'O=' setting overrides BUILD_DIR environent variable.
+#
+# When none of the above methods is used the local build is performed and
+# the object files are placed in the source directory.
+#
+
+ifdef O
+ifeq ("$(origin O)", "command line")
+BUILD_DIR := $(O)
+endif
+endif
+
+ifneq ($(BUILD_DIR),)
+saved-output := $(BUILD_DIR)
+
+# Attempt to create a output directory.
+$(shell [ -d ${BUILD_DIR} ] || mkdir -p ${BUILD_DIR})
+
+# Verify if it was successful.
+BUILD_DIR := $(shell cd $(BUILD_DIR) && /bin/pwd)
+$(if $(BUILD_DIR),,$(error output directory "$(saved-output)" does not exist))
+endif # ifneq ($(BUILD_DIR),)
+
+OBJTREE := $(if $(BUILD_DIR),$(BUILD_DIR),$(CURDIR))
+SRCTREE := $(CURDIR)
+TOPDIR := $(SRCTREE)
+LNDIR := $(OBJTREE)
+export TOPDIR SRCTREE OBJTREE
+
+MKCONFIG := $(SRCTREE)/mkconfig
+export MKCONFIG
-TOPDIR := $(shell if [ "$$PWD" != "" ]; then echo $$PWD; else pwd; fi)
-export TOPDIR
+ifneq ($(OBJTREE),$(SRCTREE))
+REMOTE_BUILD := 1
+export REMOTE_BUILD
+endif
+
+# $(obj) and (src) are defined in config.mk but here in main Makefile
+# we also need them before config.mk is included which is the case for
+# some targets like unconfig, clean, clobber, distclean, etc.
+ifneq ($(OBJTREE),$(SRCTREE))
+obj := $(OBJTREE)/
+src := $(SRCTREE)/
+else
+obj :=
+src :=
+endif
+export obj src
+
+#########################################################################
+
+ifeq ($(OBJTREE)/include/config.mk,$(wildcard $(OBJTREE)/include/config.mk))
-ifeq (include/config.mk,$(wildcard include/config.mk))
# load ARCH, BOARD, and CPU configuration
-include include/config.mk
+include $(OBJTREE)/include/config.mk
export ARCH CPU BOARD VENDOR SOC
+
ifndef CROSS_COMPILE
ifeq ($(HOSTARCH),ppc)
CROSS_COMPILE =
@@ -96,7 +160,6 @@ export CROSS_COMPILE
# load other configuration
include $(TOPDIR)/config.mk
-
#########################################################################
# U-Boot objects....order is important (i.e. start must be first)
@@ -119,6 +182,8 @@ OBJS += cpu/$(CPU)/start1.o cpu/$(CPU)/interrupt.o cpu/$(CPU)/cache.o
OBJS += cpu/$(CPU)/cplbhdlr.o cpu/$(CPU)/cplbmgr.o cpu/$(CPU)/flush.o
endif
+OBJS := $(addprefix $(obj),$(OBJS))
+
LIBS = lib_generic/libgeneric.a
LIBS += board/$(BOARDDIR)/lib$(BOARD).a
LIBS += cpu/$(CPU)/lib$(CPU).a
@@ -139,12 +204,13 @@ LIBS += drivers/sk98lin/libsk98lin.a
LIBS += post/libpost.a post/cpu/libcpu.a
LIBS += common/libcommon.a
LIBS += $(BOARDLIBS)
+
+LIBS := $(addprefix $(obj),$(LIBS))
.PHONY : $(LIBS)
# Add GCC lib
PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
-
# The "tools" are needed early, so put this first
# Don't include stuff already done in $(LIBS)
SUBDIRS = tools \
@@ -153,44 +219,61 @@ SUBDIRS = tools \
post/cpu
.PHONY : $(SUBDIRS)
+ifeq ($(CONFIG_NAND_U_BOOT),y)
+NAND_SPL = nand_spl
+U_BOOT_NAND = $(obj)u-boot-nand.bin
+endif
+
+__OBJS := $(subst $(obj),,$(OBJS))
+__LIBS := $(subst $(obj),,$(LIBS))
+
#########################################################################
#########################################################################
-ALL = u-boot.srec u-boot.bin System.map
+ALL = $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND)
all: $(ALL)
-u-boot.hex: u-boot
+$(obj)u-boot.hex: $(obj)u-boot
$(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@
-u-boot.srec: u-boot
+$(obj)u-boot.srec: $(obj)u-boot
$(OBJCOPY) ${OBJCFLAGS} -O srec $< $@
-u-boot.bin: u-boot
+$(obj)u-boot.bin: $(obj)u-boot
$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
-u-boot.img: u-boot.bin
+$(obj)u-boot.img: $(obj)u-boot.bin
./tools/mkimage -A $(ARCH) -T firmware -C none \
-a $(TEXT_BASE) -e 0 \
-n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \
sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \
-d $< $@
-u-boot.dis: u-boot
+$(obj)u-boot.dis: $(obj)u-boot
$(OBJDUMP) -d $< > $@
-u-boot: depend version $(SUBDIRS) $(OBJS) $(LIBS) $(LDSCRIPT)
+$(obj)u-boot: depend version $(SUBDIRS) $(OBJS) $(LIBS) $(LDSCRIPT)
UNDEF_SYM=`$(OBJDUMP) -x $(LIBS) |sed -n -e 's/.*\(__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
- $(LD) $(LDFLAGS) $$UNDEF_SYM $(OBJS) \
- --start-group $(LIBS) --end-group $(PLATFORM_LIBS) \
+ cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \
+ --start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \
-Map u-boot.map -o u-boot
+$(OBJS):
+ $(MAKE) -C cpu/$(CPU) $(if $(REMOTE_BUILD),$@,$(notdir $@))
+
$(LIBS):
- $(MAKE) -C `dirname $@`
+ $(MAKE) -C $(dir $(subst $(obj),,$@))
$(SUBDIRS):
$(MAKE) -C $@ all
+$(NAND_SPL): version
+ $(MAKE) -C nand_spl all
+
+$(U_BOOT_NAND): $(NAND_SPL) $(obj)u-boot.bin
+ cat nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin
+
version:
@echo -n "#define U_BOOT_VERSION \"U-Boot " > $(VERSION_FILE); \
echo -n "$(U_BOOT_VERSION)" >> $(VERSION_FILE); \
@@ -199,33 +282,42 @@ version:
echo "\"" >> $(VERSION_FILE)
gdbtools:
- $(MAKE) -C tools/gdb || exit 1
+ $(MAKE) -C tools/gdb all || exit 1
+
+updater:
+ $(MAKE) -C tools/updater all || exit 1
+
+env:
+ $(MAKE) -C tools/env all || exit 1
depend dep:
- @for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir .depend ; done
+ for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir _depend ; done
-tags:
- ctags -w `find $(SUBDIRS) include \
+tags ctags:
+ ctags -w -o $(OBJTREE)/ctags `find $(SUBDIRS) include \
lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \
fs/cramfs fs/fat fs/fdos fs/jffs2 \
net disk rtc dtt drivers drivers/sk98lin common \
\( -name CVS -prune \) -o \( -name '*.[ch]' -print \)`
etags:
- etags -a `find $(SUBDIRS) include \
+ etags -a -o $(OBJTREE)/etags `find $(SUBDIRS) include \
lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \
fs/cramfs fs/fat fs/fdos fs/jffs2 \
net disk rtc dtt drivers drivers/sk98lin common \
\( -name CVS -prune \) -o \( -name '*.[ch]' -print \)`
-System.map: u-boot
+$(obj)System.map: $(obj)u-boot
@$(NM) $< | \
grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
- sort > System.map
+ sort > $(obj)System.map
#########################################################################
else
-all install u-boot u-boot.srec depend dep:
+all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \
+$(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \
+$(SUBDIRS) version gdbtools updater env depend \
+dep tags ctags etags $(obj)System.map:
@echo "System not configured - see README" >&2
@ exit 1
endif
@@ -233,7 +325,8 @@ endif
#########################################################################
unconfig:
- @rm -f include/config.h include/config.mk board/*/config.tmp
+ @rm -f $(obj)include/config.h $(obj)include/config.mk \
+ $(obj)board/*/config.tmp $(obj)board/*/*/config.tmp
#========================================================================
# PowerPC
@@ -244,29 +337,29 @@ unconfig:
#########################################################################
canmb_config: unconfig
- @./mkconfig -a canmb ppc mpc5xxx canmb
+ @$(MKCONFIG) -a canmb ppc mpc5xxx canmb
cmi_mpc5xx_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc5xx cmi
+ @$(MKCONFIG) $(@:_config=) ppc mpc5xx cmi
PATI_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc5xx pati mpl
+ @$(MKCONFIG) $(@:_config=) ppc mpc5xx pati mpl
#########################################################################
## MPC5xxx Systems
#########################################################################
aev_config: unconfig
- @./mkconfig -a aev ppc mpc5xxx tqm5200
+ @$(MKCONFIG) -a aev ppc mpc5xxx tqm5200
BC3450_config: unconfig
- @./mkconfig -a BC3450 ppc mpc5xxx bc3450
+ @$(MKCONFIG) -a BC3450 ppc mpc5xxx bc3450
cpci5200_config: unconfig
- @./mkconfig -a cpci5200 ppc mpc5xxx cpci5200 esd
+ @$(MKCONFIG) -a cpci5200 ppc mpc5xxx cpci5200 esd
hmi1001_config: unconfig
- @./mkconfig hmi1001 ppc mpc5xxx hmi1001
+ @$(MKCONFIG) hmi1001 ppc mpc5xxx hmi1001
Lite5200_config \
Lite5200_LOWBOOT_config \
@@ -278,174 +371,218 @@ icecube_5200_DDR_config \
icecube_5200_DDR_LOWBOOT_config \
icecube_5200_DDR_LOWBOOT08_config \
icecube_5100_config: unconfig
- @ >include/config.h
+ @mkdir -p $(obj)include
+ @mkdir -p $(obj)board/icecube
+ @ >$(obj)include/config.h
@[ -z "$(findstring LOWBOOT_,$@)" ] || \
{ if [ "$(findstring DDR,$@)" ] ; \
- then echo "TEXT_BASE = 0xFF800000" >board/icecube/config.tmp ; \
- else echo "TEXT_BASE = 0xFF000000" >board/icecube/config.tmp ; \
+ then echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
+ else echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
fi ; \
echo "... with LOWBOOT configuration" ; \
}
@[ -z "$(findstring LOWBOOT08,$@)" ] || \
- { echo "TEXT_BASE = 0xFF800000" >board/icecube/config.tmp ; \
+ { echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
echo "... with 8 MB flash only" ; \
echo "... with LOWBOOT configuration" ; \
}
@[ -z "$(findstring DDR,$@)" ] || \
- { echo "#define CONFIG_MPC5200_DDR" >>include/config.h ; \
+ { echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \
echo "... DDR memory revision" ; \
}
@[ -z "$(findstring 5200,$@)" ] || \
- { echo "#define CONFIG_MPC5200" >>include/config.h ; \
+ { echo "#define CONFIG_MPC5200" >>$(obj)include/config.h ; \
echo "... with MPC5200 processor" ; \
}
@[ -z "$(findstring 5100,$@)" ] || \
- { echo "#define CONFIG_MGT5100" >>include/config.h ; \
+ { echo "#define CONFIG_MGT5100" >>$(obj)include/config.h ; \
echo "... with MGT5100 processor" ; \
}
- @./mkconfig -a IceCube ppc mpc5xxx icecube
+ @$(MKCONFIG) -a IceCube ppc mpc5xxx icecube
inka4x0_config: unconfig
- @./mkconfig inka4x0 ppc mpc5xxx inka4x0
+ @$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0
lite5200b_config \
lite5200b_LOWBOOT_config: unconfig
- @ >include/config.h
- @ echo "#define CONFIG_MPC5200_DDR" >>include/config.h
+ @mkdir -p $(obj)include
+ @mkdir -p $(obj)board/icecube
+ @ >$(obj)include/config.h
+ @ echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h
@ echo "... DDR memory revision"
- @ echo "#define CONFIG_MPC5200" >>include/config.h
- @ echo "#define CONFIG_LITE5200B" >>include/config.h
+ @ echo "#define CONFIG_MPC5200" >>$(obj)include/config.h
+ @ echo "#define CONFIG_LITE5200B" >>$(obj)include/config.h
@[ -z "$(findstring LOWBOOT_,$@)" ] || \
- { echo "TEXT_BASE = 0xFF000000" >board/icecube/config.tmp ; \
+ { echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
echo "... with LOWBOOT configuration" ; \
}
@ echo "... with MPC5200B processor"
- @./mkconfig -a IceCube ppc mpc5xxx icecube
+ @$(MKCONFIG) -a IceCube ppc mpc5xxx icecube
mcc200_config \
-mcc200_SDRAM \
-mcc200_highboot \
-mcc200_highboot_SDRAM: unconfig
- @ >include/config.h
+mcc200_SDRAM_config \
+mcc200_highboot_config \
+mcc200_COM12_config \
+mcc200_COM12_SDRAM_config \
+mcc200_COM12_highboot_config \
+mcc200_COM12_highboot_SDRAM_config \
+mcc200_highboot_SDRAM_config \
+prs200_config \
+prs200_DDR_config \
+prs200_highboot_config \
+prs200_highboot_DDR_config: unconfig
+ @mkdir -p $(obj)include
+ @mkdir -p $(obj)board/mcc200
+ @ >$(obj)include/config.h
@[ -n "$(findstring highboot,$@)" ] || \
{ echo "... with lowboot configuration" ; \
}
@[ -z "$(findstring highboot,$@)" ] || \
- { echo "TEXT_BASE = 0xFFF00000" >board/mcc200/config.tmp ; \
+ { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp ; \
echo "... with highboot configuration" ; \
}
@[ -n "$(findstring _SDRAM,$@)" ] || \
- { echo "... with DDR" ; \
+ { if [ -n "$(findstring mcc200,$@)" ]; \
+ then \
+ echo "... with DDR" ; \
+ else \
+ if [ -n "$(findstring _DDR,$@)" ];\
+ then \
+ echo "... with DDR" ; \
+ else \
+ echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ;\
+ echo "... with SDRAM" ; \
+ fi; \
+ fi; \
}
@[ -z "$(findstring _SDRAM,$@)" ] || \
- { echo "#define CONFIG_MCC200_SDRAM" >>include/config.h ; \
+ { echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ; \
echo "... with SDRAM" ; \
}
- @./mkconfig -a mcc200 ppc mpc5xxx mcc200
+ @[ -z "$(findstring COM12,$@)" ] || \
+ { echo "#define CONFIG_CONSOLE_COM12" >>$(obj)include/config.h ; \
+ echo "... with console on COM12" ; \
+ }
+ @[ -z "$(findstring prs200,$@)" ] || \
+ { echo "#define CONFIG_PRS200" >>$(obj)include/config.h ;\
+ }
+ @$(MKCONFIG) -n $@ -a mcc200 ppc mpc5xxx mcc200
o2dnt_config:
- @./mkconfig o2dnt ppc mpc5xxx o2dnt
+ @$(MKCONFIG) o2dnt ppc mpc5xxx o2dnt
pf5200_config: unconfig
- @./mkconfig pf5200 ppc mpc5xxx pf5200 esd
+ @$(MKCONFIG) pf5200 ppc mpc5xxx pf5200 esd
PM520_config \
PM520_DDR_config \
PM520_ROMBOOT_config \
PM520_ROMBOOT_DDR_config: unconfig
- @ >include/config.h
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
@[ -z "$(findstring DDR,$@)" ] || \
- { echo "#define CONFIG_MPC5200_DDR" >>include/config.h ; \
+ { echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \
echo "... DDR memory revision" ; \
}
@[ -z "$(findstring ROMBOOT,$@)" ] || \
- { echo "#define CONFIG_BOOT_ROM" >>include/config.h ; \
+ { echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
echo "... booting from 8-bit flash" ; \
}
- @./mkconfig -a PM520 ppc mpc5xxx pm520
+ @$(MKCONFIG) -a PM520 ppc mpc5xxx pm520
smmaco4_config: unconfig
- @./mkconfig -a smmaco4 ppc mpc5xxx tqm5200
+ @$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200
spieval_config: unconfig
- @./mkconfig -a spieval ppc mpc5xxx tqm5200
+ @$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200
TB5200_B_config \
TB5200_config: unconfig
+ @mkdir -p $(obj)include
@[ -z "$(findstring _B,$@)" ] || \
- { echo "#define CONFIG_TQM5200_B" >>include/config.h ; \
+ { echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
echo "... with MPC5200B processor" ; \
}
- @./mkconfig -n $@ -a TB5200 ppc mpc5xxx tqm5200
+ @$(MKCONFIG) -n $@ -a TB5200 ppc mpc5xxx tqm5200
MINI5200_config \
EVAL5200_config \
TOP5200_config: unconfig
- @ echo "#define CONFIG_$(@:_config=) 1" >include/config.h
- @./mkconfig -n $@ -a TOP5200 ppc mpc5xxx top5200 emk
+ @mkdir -p $(obj)include
+ @ echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
+ @$(MKCONFIG) -n $@ -a TOP5200 ppc mpc5xxx top5200 emk
Total5100_config \
Total5200_config \
Total5200_lowboot_config \
Total5200_Rev2_config \
Total5200_Rev2_lowboot_config: unconfig
- @ >include/config.h
+ @mkdir -p $(obj)include
+ @mkdir -p $(obj)board/total5200
+ @ >$(obj)include/config.h
@[ -z "$(findstring 5100,$@)" ] || \
- { echo "#define CONFIG_MGT5100" >>include/config.h ; \
+ { echo "#define CONFIG_MGT5100" >>$(obj)include/config.h ; \
echo "... with MGT5100 processor" ; \
}
@[ -z "$(findstring 5200,$@)" ] || \
- { echo "#define CONFIG_MPC5200" >>include/config.h ; \
+ { echo "#define CONFIG_MPC5200" >>$(obj)include/config.h ; \
echo "... with MPC5200 processor" ; \
}
@[ -n "$(findstring Rev,$@)" ] || \
- { echo "#define CONFIG_TOTAL5200_REV 1" >>include/config.h ; \
+ { echo "#define CONFIG_TOTAL5200_REV 1" >>$(obj)include/config.h ; \
echo "... revision 1 board" ; \
}
@[ -z "$(findstring Rev2_,$@)" ] || \
- { echo "#define CONFIG_TOTAL5200_REV 2" >>include/config.h ; \
+ { echo "#define CONFIG_TOTAL5200_REV 2" >>$(obj)include/config.h ; \
echo "... revision 2 board" ; \
}
@[ -z "$(findstring lowboot_,$@)" ] || \
- { echo "TEXT_BASE = 0xFE000000" >board/total5200/config.tmp ; \
+ { echo "TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp ; \
echo "... with lowboot configuration" ; \
}
- @./mkconfig -a Total5200 ppc mpc5xxx total5200
+ @$(MKCONFIG) -a Total5200 ppc mpc5xxx total5200
-TQM5200_config \
-TQM5200_B_config \
-TQM5200_B_HIGHBOOT_config \
+cam5200_config \
+fo300_config \
+MiniFAP_config \
TQM5200S_config \
TQM5200S_HIGHBOOT_config \
-TQM5200_STK100_config \
-cam5200_config \
-MiniFAP_config: unconfig
- @ >include/config.h
- @[ -z "$(findstring MiniFAP,$@)" ] || \
- { echo "#define CONFIG_MINIFAP" >>include/config.h ; \
- echo "... TQM5200_AC on MiniFAP" ; \
- }
+TQM5200_B_config \
+TQM5200_B_HIGHBOOT_config \
+TQM5200_config \
+TQM5200_STK100_config: unconfig
+ @mkdir -p $(obj)include
+ @mkdir -p $(obj)board/tqm5200
+ @ >$(obj)include/config.h
@[ -z "$(findstring cam5200,$@)" ] || \
- { echo "#define CONFIG_CAM5200" >>include/config.h ; \
- echo "#define CONFIG_TQM5200S" >>include/config.h ; \
- echo "#define CONFIG_TQM5200_B" >>include/config.h ; \
+ { echo "#define CONFIG_CAM5200" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
echo "... TQM5200S on Cam5200" ; \
}
+ @[ -z "$(findstring fo300,$@)" ] || \
+ { echo "#define CONFIG_FO300" >>$(obj)include/config.h ; \
+ echo "... TQM5200 on FO300" ; \
+ }
+ @[ -z "$(findstring MiniFAP,$@)" ] || \
+ { echo "#define CONFIG_MINIFAP" >>$(obj)include/config.h ; \
+ echo "... TQM5200_AC on MiniFAP" ; \
+ }
@[ -z "$(findstring STK100,$@)" ] || \
- { echo "#define CONFIG_STK52XX_REV100" >>include/config.h ; \
+ { echo "#define CONFIG_STK52XX_REV100" >>$(obj)include/config.h ; \
echo "... on a STK52XX.100 base board" ; \
}
@[ -z "$(findstring TQM5200_B,$@)" ] || \
- { echo "#define CONFIG_TQM5200_B" >>include/config.h ; \
+ { echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring TQM5200S,$@)" ] || \
- { echo "#define CONFIG_TQM5200S" >>include/config.h ; \
- echo "#define CONFIG_TQM5200_B" >>include/config.h ; \
+ { echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring HIGHBOOT,$@)" ] || \
- { echo "TEXT_BASE = 0xFFF00000" >board/tqm5200/config.tmp ; \
+ { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \
}
- @./mkconfig -n $@ -a TQM5200 ppc mpc5xxx tqm5200
+ @$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200
#########################################################################
## MPC8xx Systems
@@ -455,9 +592,10 @@ Adder_config \
Adder87x_config \
AdderII_config \
: unconfig
+ @mkdir -p $(obj)include
$(if $(findstring AdderII,$@), \
- @echo "#define CONFIG_MPC852T" > include/config.h)
- @./mkconfig -a Adder ppc mpc8xx adder
+ @echo "#define CONFIG_MPC852T" > $(obj)include/config.h)
+ @$(MKCONFIG) -a Adder ppc mpc8xx adder
ADS860_config \
FADS823_config \
@@ -465,154 +603,160 @@ FADS850SAR_config \
MPC86xADS_config \
MPC885ADS_config \
FADS860T_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx fads
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx fads
AMX860_config : unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx amx860 westel
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx amx860 westel
c2mon_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx c2mon
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx c2mon
CCM_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx CCM siemens
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx CCM siemens
cogent_mpc8xx_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx cogent
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx cogent
ELPT860_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx elpt860 LEOX
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx elpt860 LEOX
EP88x_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx ep88x
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx ep88x
ESTEEM192E_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx esteem192e
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx esteem192e
ETX094_config : unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx etx094
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx etx094
FLAGADM_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx flagadm
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx flagadm
xtract_GEN860T = $(subst _SC,,$(subst _config,,$1))
GEN860T_SC_config \
GEN860T_config: unconfig
- @ >include/config.h
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
@[ -z "$(findstring _SC,$@)" ] || \
- { echo "#define CONFIG_SC" >>include/config.h ; \
+ { echo "#define CONFIG_SC" >>$(obj)include/config.h ; \
echo "With reduced H/W feature set (SC)..." ; \
}
- @./mkconfig -a $(call xtract_GEN860T,$@) ppc mpc8xx gen860t
+ @$(MKCONFIG) -a $(call xtract_GEN860T,$@) ppc mpc8xx gen860t
GENIETV_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx genietv
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx genietv
GTH_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx gth
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx gth
hermes_config : unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx hermes
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx hermes
HMI10_config : unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx tqm8xx
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx
IAD210_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx IAD210 siemens
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx IAD210 siemens
xtract_ICU862 = $(subst _100MHz,,$(subst _config,,$1))
ICU862_100MHz_config \
ICU862_config: unconfig
- @ >include/config.h
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
@[ -z "$(findstring _100MHz,$@)" ] || \
- { echo "#define CONFIG_100MHz" >>include/config.h ; \
+ { echo "#define CONFIG_100MHz" >>$(obj)include/config.h ; \
echo "... with 100MHz system clock" ; \
}
- @./mkconfig -a $(call xtract_ICU862,$@) ppc mpc8xx icu862
+ @$(MKCONFIG) -a $(call xtract_ICU862,$@) ppc mpc8xx icu862
IP860_config : unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx ip860
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx ip860
IVML24_256_config \
IVML24_128_config \
IVML24_config: unconfig
- @ >include/config.h
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
@[ -z "$(findstring IVML24_config,$@)" ] || \
- { echo "#define CONFIG_IVML24_16M" >>include/config.h ; \
+ { echo "#define CONFIG_IVML24_16M" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring IVML24_128_config,$@)" ] || \
- { echo "#define CONFIG_IVML24_32M" >>include/config.h ; \
+ { echo "#define CONFIG_IVML24_32M" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring IVML24_256_config,$@)" ] || \
- { echo "#define CONFIG_IVML24_64M" >>include/config.h ; \
+ { echo "#define CONFIG_IVML24_64M" >>$(obj)include/config.h ; \
}
- @./mkconfig -a IVML24 ppc mpc8xx ivm
+ @$(MKCONFIG) -a IVML24 ppc mpc8xx ivm
IVMS8_256_config \
IVMS8_128_config \
IVMS8_config: unconfig
- @ >include/config.h
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
@[ -z "$(findstring IVMS8_config,$@)" ] || \
- { echo "#define CONFIG_IVMS8_16M" >>include/config.h ; \
+ { echo "#define CONFIG_IVMS8_16M" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring IVMS8_128_config,$@)" ] || \
- { echo "#define CONFIG_IVMS8_32M" >>include/config.h ; \
+ { echo "#define CONFIG_IVMS8_32M" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring IVMS8_256_config,$@)" ] || \
- { echo "#define CONFIG_IVMS8_64M" >>include/config.h ; \
+ { echo "#define CONFIG_IVMS8_64M" >>$(obj)include/config.h ; \
}
- @./mkconfig -a IVMS8 ppc mpc8xx ivm
+ @$(MKCONFIG) -a IVMS8 ppc mpc8xx ivm
KUP4K_config : unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx kup4k kup
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4k kup
KUP4X_config : unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx kup4x kup
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4x kup
LANTEC_config : unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx lantec
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx lantec
lwmon_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx lwmon
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx lwmon
MBX_config \
MBX860T_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx mbx8xx
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx mbx8xx
MHPC_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx mhpc eltec
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx mhpc eltec
MVS1_config : unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx mvs1
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx mvs1
xtract_NETVIA = $(subst _V2,,$(subst _config,,$1))
NETVIA_V2_config \
NETVIA_config: unconfig
- @ >include/config.h
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
@[ -z "$(findstring NETVIA_config,$@)" ] || \
- { echo "#define CONFIG_NETVIA_VERSION 1" >>include/config.h ; \
+ { echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h ; \
echo "... Version 1" ; \
}
@[ -z "$(findstring NETVIA_V2_config,$@)" ] || \
- { echo "#define CONFIG_NETVIA_VERSION 2" >>include/config.h ; \
+ { echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h ; \
echo "... Version 2" ; \
}
- @./mkconfig -a $(call xtract_NETVIA,$@) ppc mpc8xx netvia
+ @$(MKCONFIG) -a $(call xtract_NETVIA,$@) ppc mpc8xx netvia
xtract_NETPHONE = $(subst _V2,,$(subst _config,,$1))
NETPHONE_V2_config \
NETPHONE_config: unconfig
- @ >include/config.h
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
@[ -z "$(findstring NETPHONE_config,$@)" ] || \
- { echo "#define CONFIG_NETPHONE_VERSION 1" >>include/config.h ; \
+ { echo "#define CONFIG_NETPHONE_VERSION 1" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \
- { echo "#define CONFIG_NETPHONE_VERSION 2" >>include/config.h ; \
+ { echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h ; \
}
- @./mkconfig -a $(call xtract_NETPHONE,$@) ppc mpc8xx netphone
+ @$(MKCONFIG) -a $(call xtract_NETPHONE,$@) ppc mpc8xx netphone
xtract_NETTA = $(subst _SWAPHOOK,,$(subst _6412,,$(subst _ISDN,,$(subst _config,,$1))))
@@ -624,85 +768,88 @@ NETTA_ISDN_6412_config \
NETTA_ISDN_config \
NETTA_6412_config \
NETTA_config: unconfig
- @ >include/config.h
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
@[ -z "$(findstring ISDN_,$@)" ] || \
- { echo "#define CONFIG_NETTA_ISDN 1" >>include/config.h ; \
+ { echo "#define CONFIG_NETTA_ISDN 1" >>$(obj)include/config.h ; \
}
@[ -n "$(findstring ISDN_,$@)" ] || \
- { echo "#undef CONFIG_NETTA_ISDN" >>include/config.h ; \
+ { echo "#undef CONFIG_NETTA_ISDN" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring 6412_,$@)" ] || \
- { echo "#define CONFIG_NETTA_6412 1" >>include/config.h ; \
+ { echo "#define CONFIG_NETTA_6412 1" >>$(obj)include/config.h ; \
}
@[ -n "$(findstring 6412_,$@)" ] || \
- { echo "#undef CONFIG_NETTA_6412" >>include/config.h ; \
+ { echo "#undef CONFIG_NETTA_6412" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring SWAPHOOK_,$@)" ] || \
- { echo "#define CONFIG_NETTA_SWAPHOOK 1" >>include/config.h ; \
+ { echo "#define CONFIG_NETTA_SWAPHOOK 1" >>$(obj)include/config.h ; \
}
@[ -n "$(findstring SWAPHOOK_,$@)" ] || \
- { echo "#undef CONFIG_NETTA_SWAPHOOK" >>include/config.h ; \
+ { echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h ; \
}
- @./mkconfig -a $(call xtract_NETTA,$@) ppc mpc8xx netta
+ @$(MKCONFIG) -a $(call xtract_NETTA,$@) ppc mpc8xx netta
xtract_NETTA2 = $(subst _V2,,$(subst _config,,$1))
NETTA2_V2_config \
NETTA2_config: unconfig
- @ >include/config.h
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
@[ -z "$(findstring NETTA2_config,$@)" ] || \
- { echo "#define CONFIG_NETTA2_VERSION 1" >>include/config.h ; \
+ { echo "#define CONFIG_NETTA2_VERSION 1" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring NETTA2_V2_config,$@)" ] || \
- { echo "#define CONFIG_NETTA2_VERSION 2" >>include/config.h ; \
+ { echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h ; \
}
- @./mkconfig -a $(call xtract_NETTA2,$@) ppc mpc8xx netta2
+ @$(MKCONFIG) -a $(call xtract_NETTA2,$@) ppc mpc8xx netta2
NC650_Rev1_config \
NC650_Rev2_config \
CP850_config: unconfig
- @ >include/config.h
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
@[ -z "$(findstring CP850,$@)" ] || \
- { echo "#define CONFIG_CP850 1" >>include/config.h ; \
- echo "#define CONFIG_IDS852_REV2 1" >>include/config.h ; \
+ { echo "#define CONFIG_CP850 1" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring Rev1,$@)" ] || \
- { echo "#define CONFIG_IDS852_REV1 1" >>include/config.h ; \
+ { echo "#define CONFIG_IDS852_REV1 1" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring Rev2,$@)" ] || \
- { echo "#define CONFIG_IDS852_REV2 1" >>include/config.h ; \
+ { echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
}
- @./mkconfig -a NC650 ppc mpc8xx nc650
+ @$(MKCONFIG) -a NC650 ppc mpc8xx nc650
NX823_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx nx823
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx nx823
pcu_e_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx pcu_e siemens
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx pcu_e siemens
QS850_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx qs850 snmc
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc
QS823_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx qs850 snmc
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc
QS860T_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx qs860t snmc
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx qs860t snmc
quantum_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx quantum
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx quantum
R360MPI_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx r360mpi
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx r360mpi
RBC823_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx rbc823
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx rbc823
RPXClassic_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx RPXClassic
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXClassic
RPXlite_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx RPXlite
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXlite
RPXlite_DW_64_config \
RPXlite_DW_LCD_config \
@@ -712,55 +859,56 @@ RPXlite_DW_NVRAM_64_config \
RPXlite_DW_NVRAM_LCD_config \
RPXlite_DW_NVRAM_64_LCD_config \
RPXlite_DW_config: unconfig
- @ >include/config.h
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
@[ -z "$(findstring _64,$@)" ] || \
- { echo "#define RPXlite_64MHz" >>include/config.h ; \
+ { echo "#define RPXlite_64MHz" >>$(obj)include/config.h ; \
echo "... with 64MHz system clock ..."; \
}
@[ -z "$(findstring _LCD,$@)" ] || \
- { echo "#define CONFIG_LCD" >>include/config.h ; \
- echo "#define CONFIG_NEC_NL6448BC20" >>include/config.h ; \
+ { echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \
echo "... with LCD display ..."; \
}
@[ -z "$(findstring _NVRAM,$@)" ] || \
- { echo "#define CFG_ENV_IS_IN_NVRAM" >>include/config.h ; \
+ { echo "#define CFG_ENV_IS_IN_NVRAM" >>$(obj)include/config.h ; \
echo "... with ENV in NVRAM ..."; \
}
- @./mkconfig -a RPXlite_DW ppc mpc8xx RPXlite_dw
+ @$(MKCONFIG) -a RPXlite_DW ppc mpc8xx RPXlite_dw
rmu_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx rmu
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx rmu
RRvision_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx RRvision
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx RRvision
RRvision_LCD_config: unconfig
- @echo "#define CONFIG_LCD" >include/config.h
- @echo "#define CONFIG_SHARP_LQ104V7DS01" >>include/config.h
- @./mkconfig -a RRvision ppc mpc8xx RRvision
+ @mkdir -p $(obj)include
+ @echo "#define CONFIG_LCD" >$(obj)include/config.h
+ @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
+ @$(MKCONFIG) -a RRvision ppc mpc8xx RRvision
SM850_config : unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx tqm8xx
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx
spc1920_config:
- @./mkconfig $(@:_config=) ppc mpc8xx spc1920
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx spc1920
SPD823TS_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx spd8xx
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx spd8xx
stxxtc_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx stxxtc
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx stxxtc
svm_sc8xx_config: unconfig
- @ >include/config.h
- @./mkconfig $(@:_config=) ppc mpc8xx svm_sc8xx
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx svm_sc8xx
SXNI855T_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx sixnet
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx sixnet
# EMK MPC8xx based modules
TOP860_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx top860 emk
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx top860 emk
# Play some tricks for configuration selection
# Only 855 and 860 boards may come with FEC
@@ -784,31 +932,35 @@ TQM862M_config \
TQM866M_config \
TQM885D_config \
virtlab2_config: unconfig
- @ >include/config.h
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
@[ -z "$(findstring _LCD,$@)" ] || \
- { echo "#define CONFIG_LCD" >>include/config.h ; \
- echo "#define CONFIG_NEC_NL6448BC20" >>include/config.h ; \
+ { echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \
echo "... with LCD display" ; \
}
- @./mkconfig -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx
+ @$(MKCONFIG) -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx
TTTech_config: unconfig
- @echo "#define CONFIG_LCD" >include/config.h
- @echo "#define CONFIG_SHARP_LQ104V7DS01" >>include/config.h
- @./mkconfig -a TQM823L ppc mpc8xx tqm8xx
+ @mkdir -p $(obj)include
+ @echo "#define CONFIG_LCD" >$(obj)include/config.h
+ @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
+ @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx
uc100_config : unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx uc100
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx uc100
v37_config: unconfig
- @echo "#define CONFIG_LCD" >include/config.h
- @echo "#define CONFIG_SHARP_LQ084V1DG21" >>include/config.h
- @./mkconfig $(@:_config=) ppc mpc8xx v37
+ @mkdir -p $(obj)include
+ @echo "#define CONFIG_LCD" >$(obj)include/config.h
+ @echo "#define CONFIG_SHARP_LQ084V1DG21" >>$(obj)include/config.h
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx v37
wtk_config: unconfig
- @echo "#define CONFIG_LCD" >include/config.h
- @echo "#define CONFIG_SHARP_LQ065T9DR51U" >>include/config.h
- @./mkconfig -a TQM823L ppc mpc8xx tqm8xx
+ @mkdir -p $(obj)include
+ @echo "#define CONFIG_LCD" >$(obj)include/config.h
+ @echo "#define CONFIG_SHARP_LQ065T9DR51U" >>$(obj)include/config.h
+ @$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx
#########################################################################
## PPC4xx Systems
@@ -816,149 +968,151 @@ wtk_config: unconfig
xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(subst _config,,$1))))))
ADCIOP_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx adciop esd
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd
alpr_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx alpr prodrive
AP1000_config:unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx ap1000 amirix
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx ap1000 amirix
APC405_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx apc405 esd
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx apc405 esd
AR405_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx ar405 esd
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx ar405 esd
ASH405_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx ash405 esd
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx ash405 esd
bamboo_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx bamboo amcc
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx bamboo amcc
bubinga_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx bubinga amcc
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx bubinga amcc
CANBT_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx canbt esd
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx canbt esd
CATcenter_config \
CATcenter_25_config \
CATcenter_33_config: unconfig
- @ echo "/* CATcenter uses PPChameleon Model ME */" > include/config.h
- @ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> include/config.h
+ @mkdir -p $(obj)include
+ @ echo "/* CATcenter uses PPChameleon Model ME */" > $(obj)include/config.h
+ @ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> $(obj)include/config.h
@[ -z "$(findstring _25,$@)" ] || \
- { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>include/config.h ; \
+ { echo "#define CONFIG_PPCHAMELEON_CLK_25" >> $(obj)include/config.h ; \
echo "SysClk = 25MHz" ; \
}
@[ -z "$(findstring _33,$@)" ] || \
- { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>include/config.h ; \
+ { echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h ; \
echo "SysClk = 33MHz" ; \
}
- @./mkconfig -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
+ @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
CPCI2DP_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx cpci2dp esd
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci2dp esd
CPCI405_config \
CPCI4052_config \
CPCI405DT_config \
CPCI405AB_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx cpci405 esd
- @echo "BOARD_REVISION = $(@:_config=)" >>include/config.mk
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd
+ @echo "BOARD_REVISION = $(@:_config=)" >> $(obj)include/config.mk
CPCI440_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx cpci440 esd
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci440 esd
CPCIISER4_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx cpciiser4 esd
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpciiser4 esd
CRAYL1_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx L1 cray
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx L1 cray
csb272_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx csb272
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx csb272
csb472_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx csb472
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx csb472
DASA_SIM_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx dasa_sim esd
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx dasa_sim esd
DP405_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx dp405 esd
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx dp405 esd
DU405_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx du405 esd
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx du405 esd
ebony_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx ebony amcc
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx ebony amcc
ERIC_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx eric
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx eric
EXBITGEN_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx exbitgen
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx exbitgen
G2000_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx g2000
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx g2000
HH405_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx hh405 esd
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx hh405 esd
HUB405_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx hub405 esd
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx hub405 esd
JSE_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx jse
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx jse
KAREF_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx karef sandburst
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx karef sandburst
luan_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx luan amcc
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx luan amcc
METROBOX_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx metrobox sandburst
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx metrobox sandburst
MIP405_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx mip405 mpl
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx mip405 mpl
MIP405T_config: unconfig
- @echo "#define CONFIG_MIP405T" >include/config.h
+ @mkdir -p $(obj)include
+ @echo "#define CONFIG_MIP405T" >$(obj)include/config.h
@echo "Enable subset config for MIP405T"
- @./mkconfig -a MIP405 ppc ppc4xx mip405 mpl
+ @$(MKCONFIG) -a MIP405 ppc ppc4xx mip405 mpl
ML2_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx ml2
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml2
ml300_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx ml300 xilinx
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx ml300 xilinx
ocotea_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx ocotea amcc
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx ocotea amcc
OCRTC_config \
ORSG_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx ocrtc esd
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx ocrtc esd
p3p440_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx p3p440 prodrive
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx p3p440 prodrive
PCI405_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx pci405 esd
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx pci405 esd
pcs440ep_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx pcs440ep
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx pcs440ep
PIP405_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx pip405 mpl
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx pip405 mpl
PLU405_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx plu405 esd
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx plu405 esd
PMC405_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx pmc405 esd
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405 esd
PPChameleonEVB_config \
PPChameleonEVB_BA_25_config \
@@ -967,66 +1121,93 @@ PPChameleonEVB_HI_25_config \
PPChameleonEVB_BA_33_config \
PPChameleonEVB_ME_33_config \
PPChameleonEVB_HI_33_config: unconfig
- @ >include/config.h
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
@[ -z "$(findstring EVB_BA,$@)" ] || \
- { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>include/config.h ; \
+ { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>$(obj)include/config.h ; \
echo "... BASIC model" ; \
}
@[ -z "$(findstring EVB_ME,$@)" ] || \
- { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>include/config.h ; \
+ { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>$(obj)include/config.h ; \
echo "... MEDIUM model" ; \
}
@[ -z "$(findstring EVB_HI,$@)" ] || \
- { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>include/config.h ; \
+ { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>$(obj)include/config.h ; \
echo "... HIGH-END model" ; \
}
@[ -z "$(findstring _25,$@)" ] || \
- { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>include/config.h ; \
+ { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>$(obj)include/config.h ; \
echo "SysClk = 25MHz" ; \
}
@[ -z "$(findstring _33,$@)" ] || \
- { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>include/config.h ; \
+ { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h ; \
echo "SysClk = 33MHz" ; \
}
- @./mkconfig -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
+ @$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
+
+rainier_config: unconfig
+ @echo "#define CONFIG_RAINIER" > include/config.h
+ @echo "Configuring for rainier board as subset of sequoia..."
+ @$(MKCONFIG) -a sequoia ppc ppc4xx sequoia amcc
+
+rainier_nand_config: unconfig
+ @echo "#define CONFIG_RAINIER" > include/config.h
+ @echo "Configuring for rainier board as subset of sequoia..."
+ @ln -s board/amcc/sequoia/Makefile nand_spl/Makefile
+ @echo "#define CONFIG_NAND_U_BOOT" >> include/config.h
+ @echo "Compile NAND boot image for sequoia"
+ @$(MKCONFIG) -a sequoia ppc ppc4xx sequoia amcc
+ @echo "TEXT_BASE = 0x01000000" >board/amcc/sequoia/config.tmp
+ @echo "CONFIG_NAND_U_BOOT = y" >> include/config.mk
sbc405_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx sbc405
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx sbc405
+
+sequoia_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx sequoia amcc
+
+sequoia_nand_config: unconfig
+ @ln -s board/amcc/sequoia/Makefile nand_spl/Makefile
+ @echo "#define CONFIG_NAND_U_BOOT" >include/config.h
+ @echo "Compile NAND boot image for sequoia"
+ @$(MKCONFIG) -a sequoia ppc ppc4xx sequoia amcc
+ @echo "TEXT_BASE = 0x01000000" >board/amcc/sequoia/config.tmp
+ @echo "CONFIG_NAND_U_BOOT = y" >> include/config.mk
sycamore_config: unconfig
@echo "Configuring for sycamore board as subset of walnut..."
- @./mkconfig -a walnut ppc ppc4xx walnut amcc
+ @$(MKCONFIG) -a walnut ppc ppc4xx walnut amcc
VOH405_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx voh405 esd
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx voh405 esd
VOM405_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx vom405 esd
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx vom405 esd
CMS700_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx cms700 esd
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx cms700 esd
W7OLMC_config \
W7OLMG_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx w7o
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx w7o
walnut_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx walnut amcc
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx walnut amcc
WUH405_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx wuh405 esd
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx wuh405 esd
XPEDITE1K_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx xpedite1k
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx xpedite1k
yosemite_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx yosemite amcc
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx yosemite amcc
yellowstone_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx yellowstone amcc
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx yellowstone amcc
yucca_config: unconfig
- @./mkconfig $(@:_config=) ppc ppc4xx yucca amcc
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx yucca amcc
#########################################################################
## MPC8220 Systems
@@ -1034,10 +1215,10 @@ yucca_config: unconfig
Alaska8220_config \
Yukon8220_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8220 alaska
+ @$(MKCONFIG) $(@:_config=) ppc mpc8220 alaska
sorcery_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8220 sorcery
+ @$(MKCONFIG) $(@:_config=) ppc mpc8220 sorcery
#########################################################################
## MPC824x Systems
@@ -1045,18 +1226,18 @@ sorcery_config: unconfig
xtract_82xx = $(subst _BIGFLASH,,$(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1))))))
A3000_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc824x a3000
+ @$(MKCONFIG) $(@:_config=) ppc mpc824x a3000
barco_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc824x barco
+ @$(MKCONFIG) $(@:_config=) ppc mpc824x barco
BMW_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc824x bmw
+ @$(MKCONFIG) $(@:_config=) ppc mpc824x bmw
CPC45_config \
CPC45_ROMBOOT_config: unconfig
- @./mkconfig $(call xtract_82xx,$@) ppc mpc824x cpc45
- @cd ./include ; \
+ @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc824x cpc45
+ @cd $(obj)include ; \
if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
echo "... booting from 8-bit flash" ; \
@@ -1067,64 +1248,64 @@ CPC45_ROMBOOT_config: unconfig
echo "export CONFIG_BOOT_ROM" >> config.mk;
CU824_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc824x cu824
+ @$(MKCONFIG) $(@:_config=) ppc mpc824x cu824
debris_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc824x debris etin
+ @$(MKCONFIG) $(@:_config=) ppc mpc824x debris etin
eXalion_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc824x eXalion
+ @$(MKCONFIG) $(@:_config=) ppc mpc824x eXalion
HIDDEN_DRAGON_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc824x hidden_dragon
+ @$(MKCONFIG) $(@:_config=) ppc mpc824x hidden_dragon
kvme080_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc824x kvme080 etin
+ @$(MKCONFIG) $(@:_config=) ppc mpc824x kvme080 etin
MOUSSE_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc824x mousse
+ @$(MKCONFIG) $(@:_config=) ppc mpc824x mousse
MUSENKI_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc824x musenki
+ @$(MKCONFIG) $(@:_config=) ppc mpc824x musenki
MVBLUE_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc824x mvblue
+ @$(MKCONFIG) $(@:_config=) ppc mpc824x mvblue
OXC_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc824x oxc
+ @$(MKCONFIG) $(@:_config=) ppc mpc824x oxc
PN62_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc824x pn62
+ @$(MKCONFIG) $(@:_config=) ppc mpc824x pn62
Sandpoint8240_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc824x sandpoint
+ @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint
Sandpoint8245_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc824x sandpoint
+ @$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint
sbc8240_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc824x sbc8240
+ @$(MKCONFIG) $(@:_config=) ppc mpc824x sbc8240
SL8245_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc824x sl8245
+ @$(MKCONFIG) $(@:_config=) ppc mpc824x sl8245
utx8245_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc824x utx8245
+ @$(MKCONFIG) $(@:_config=) ppc mpc824x utx8245
#########################################################################
## MPC8260 Systems
#########################################################################
atc_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8260 atc
+ @$(MKCONFIG) $(@:_config=) ppc mpc8260 atc
cogent_mpc8260_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8260 cogent
+ @$(MKCONFIG) $(@:_config=) ppc mpc8260 cogent
CPU86_config \
CPU86_ROMBOOT_config: unconfig
- @./mkconfig $(call xtract_82xx,$@) ppc mpc8260 cpu86
- @cd ./include ; \
+ @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu86
+ @cd $(obj)include ; \
if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
echo "... booting from 8-bit flash" ; \
@@ -1136,8 +1317,8 @@ CPU86_ROMBOOT_config: unconfig
CPU87_config \
CPU87_ROMBOOT_config: unconfig
- @./mkconfig $(call xtract_82xx,$@) ppc mpc8260 cpu87
- @cd ./include ; \
+ @$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu87
+ @cd $(obj)include ; \
if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
echo "... booting from 8-bit flash" ; \
@@ -1149,29 +1330,30 @@ CPU87_ROMBOOT_config: unconfig
ep8248_config \
ep8248E_config : unconfig
- @./mkconfig ep8248 ppc mpc8260 ep8248
+ @$(MKCONFIG) ep8248 ppc mpc8260 ep8248
ep8260_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8260 ep8260
+ @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep8260
gw8260_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8260 gw8260
+ @$(MKCONFIG) $(@:_config=) ppc mpc8260 gw8260
hymod_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8260 hymod
+ @$(MKCONFIG) $(@:_config=) ppc mpc8260 hymod
IDS8247_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8260 ids8247
+ @$(MKCONFIG) $(@:_config=) ppc mpc8260 ids8247
IPHASE4539_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8260 iphase4539
+ @$(MKCONFIG) $(@:_config=) ppc mpc8260 iphase4539
ISPAN_config \
ISPAN_REVB_config: unconfig
+ @mkdir -p $(obj)include
@if [ "$(findstring _REVB_,$@)" ] ; then \
- echo "#define CFG_REV_B" > include/config.h ; \
+ echo "#define CFG_REV_B" > $(obj)include/config.h ; \
fi
- @./mkconfig -a ISPAN ppc mpc8260 ispan
+ @$(MKCONFIG) -a ISPAN ppc mpc8260 ispan
MPC8260ADS_config \
MPC8260ADS_lowboot_config \
@@ -1190,21 +1372,23 @@ PQ2FADS-ZU_lowboot_config \
PQ2FADS-ZU_66MHz_config \
PQ2FADS-ZU_66MHz_lowboot_config \
: unconfig
+ @mkdir -p $(obj)include
+ @mkdir -p $(obj)board/mpc8260ads
$(if $(findstring PQ2FADS,$@), \
- @echo "#define CONFIG_ADSTYPE CFG_PQ2FADS" > include/config.h, \
- @echo "#define CONFIG_ADSTYPE CFG_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > include/config.h)
+ @echo "#define CONFIG_ADSTYPE CFG_PQ2FADS" > $(obj)include/config.h, \
+ @echo "#define CONFIG_ADSTYPE CFG_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > $(obj)include/config.h)
$(if $(findstring MHz,$@), \
- @echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> include/config.h, \
+ @echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> $(obj)include/config.h, \
$(if $(findstring VR,$@), \
- @echo "#define CONFIG_8260_CLKIN 66000000" >> include/config.h))
+ @echo "#define CONFIG_8260_CLKIN 66000000" >> $(obj)include/config.h))
@[ -z "$(findstring lowboot_,$@)" ] || \
- { echo "TEXT_BASE = 0xFF800000" >board/mpc8260ads/config.tmp ; \
+ { echo "TEXT_BASE = 0xFF800000" >$(obj)board/mpc8260ads/config.tmp ; \
echo "... with lowboot configuration" ; \
}
- @./mkconfig -a MPC8260ADS ppc mpc8260 mpc8260ads
+ @$(MKCONFIG) -a MPC8260ADS ppc mpc8260 mpc8260ads
MPC8266ADS_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8260 mpc8266ads
+ @$(MKCONFIG) $(@:_config=) ppc mpc8260 mpc8266ads
# PM825/PM826 default configuration: small (= 8 MB) Flash / boot from 64-bit flash
PM825_config \
@@ -1215,71 +1399,76 @@ PM826_config \
PM826_ROMBOOT_config \
PM826_BIGFLASH_config \
PM826_ROMBOOT_BIGFLASH_config: unconfig
+ @mkdir -p $(obj)include
+ @mkdir -p $(obj)board/pm826
@if [ "$(findstring PM825_,$@)" ] ; then \
- echo "#define CONFIG_PCI" >include/config.h ; \
+ echo "#define CONFIG_PCI" >$(obj)include/config.h ; \
else \
- >include/config.h ; \
+ >$(obj)include/config.h ; \
fi
@if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
echo "... booting from 8-bit flash" ; \
- echo "#define CONFIG_BOOT_ROM" >>include/config.h ; \
- echo "TEXT_BASE = 0xFF800000" >board/pm826/config.tmp ; \
+ echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
+ echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
echo "... with 32 MB Flash" ; \
- echo "#define CONFIG_FLASH_32MB" >>include/config.h ; \
+ echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
fi; \
else \
echo "... booting from 64-bit flash" ; \
if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
echo "... with 32 MB Flash" ; \
- echo "#define CONFIG_FLASH_32MB" >>include/config.h ; \
- echo "TEXT_BASE = 0x40000000" >board/pm826/config.tmp ; \
+ echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
+ echo "TEXT_BASE = 0x40000000" >$(obj)board/pm826/config.tmp ; \
else \
- echo "TEXT_BASE = 0xFF000000" >board/pm826/config.tmp ; \
+ echo "TEXT_BASE = 0xFF000000" >$(obj)board/pm826/config.tmp ; \
fi; \
fi
- @./mkconfig -a PM826 ppc mpc8260 pm826
+ @$(MKCONFIG) -a PM826 ppc mpc8260 pm826
PM828_config \
PM828_PCI_config \
PM828_ROMBOOT_config \
PM828_ROMBOOT_PCI_config: unconfig
+ @mkdir -p $(obj)include
+ @mkdir -p $(obj)board/pm826
@if [ "$(findstring _PCI_,$@)" ] ; then \
- echo "#define CONFIG_PCI" >>include/config.h ; \
+ echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
echo "... with PCI enabled" ; \
else \
- >include/config.h ; \
+ >$(obj)include/config.h ; \
fi
@if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
echo "... booting from 8-bit flash" ; \
- echo "#define CONFIG_BOOT_ROM" >>include/config.h ; \
- echo "TEXT_BASE = 0xFF800000" >board/pm826/config.tmp ; \
+ echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
+ echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
fi
- @./mkconfig -a PM828 ppc mpc8260 pm828
+ @$(MKCONFIG) -a PM828 ppc mpc8260 pm828
ppmc8260_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8260 ppmc8260
+ @$(MKCONFIG) $(@:_config=) ppc mpc8260 ppmc8260
Rattler8248_config \
Rattler_config: unconfig
+ @mkdir -p $(obj)include
$(if $(findstring 8248,$@), \
- @echo "#define CONFIG_MPC8248" > include/config.h)
- @./mkconfig -a Rattler ppc mpc8260 rattler
+ @echo "#define CONFIG_MPC8248" > $(obj)include/config.h)
+ @$(MKCONFIG) -a Rattler ppc mpc8260 rattler
RPXsuper_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8260 rpxsuper
+ @$(MKCONFIG) $(@:_config=) ppc mpc8260 rpxsuper
rsdproto_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8260 rsdproto
+ @$(MKCONFIG) $(@:_config=) ppc mpc8260 rsdproto
sacsng_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8260 sacsng
+ @$(MKCONFIG) $(@:_config=) ppc mpc8260 sacsng
sbc8260_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8260 sbc8260
+ @$(MKCONFIG) $(@:_config=) ppc mpc8260 sbc8260
SCM_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8260 SCM siemens
+ @$(MKCONFIG) $(@:_config=) ppc mpc8260 SCM siemens
TQM8255_AA_config \
TQM8260_AA_config \
@@ -1292,6 +1481,7 @@ TQM8260_AG_config \
TQM8260_AH_config \
TQM8260_AI_config \
TQM8265_AA_config: unconfig
+ @mkdir -p $(obj)include
@case "$@" in \
TQM8255_AA_config) CTYPE=MPC8255; CFREQ=300; CACHE=no; BMODE=8260;; \
TQM8260_AA_config) CTYPE=MPC8260; CFREQ=200; CACHE=no; BMODE=8260;; \
@@ -1305,205 +1495,214 @@ TQM8265_AA_config: unconfig
TQM8260_AI_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \
TQM8265_AA_config) CTYPE=MPC8265; CFREQ=300; CACHE=no; BMODE=60x;; \
esac; \
- >include/config.h ; \
+ >$(obj)include/config.h ; \
if [ "$${CTYPE}" != "MPC8260" ] ; then \
- echo "#define CONFIG_$${CTYPE}" >>include/config.h ; \
+ echo "#define CONFIG_$${CTYPE}" >>$(obj)include/config.h ; \
fi; \
- echo "#define CONFIG_$${CFREQ}MHz" >>include/config.h ; \
+ echo "#define CONFIG_$${CFREQ}MHz" >>$(obj)include/config.h ; \
echo "... with $${CFREQ}MHz system clock" ; \
if [ "$${CACHE}" == "yes" ] ; then \
- echo "#define CONFIG_L2_CACHE" >>include/config.h ; \
+ echo "#define CONFIG_L2_CACHE" >>$(obj)include/config.h ; \
echo "... with L2 Cache support" ; \
else \
- echo "#undef CONFIG_L2_CACHE" >>include/config.h ; \
+ echo "#undef CONFIG_L2_CACHE" >>$(obj)include/config.h ; \
echo "... without L2 Cache support" ; \
fi; \
if [ "$${BMODE}" == "60x" ] ; then \
- echo "#define CONFIG_BUSMODE_60x" >>include/config.h ; \
+ echo "#define CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \
echo "... with 60x Bus Mode" ; \
else \
- echo "#undef CONFIG_BUSMODE_60x" >>include/config.h ; \
+ echo "#undef CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \
echo "... without 60x Bus Mode" ; \
fi
- @./mkconfig -a TQM8260 ppc mpc8260 tqm8260
+ @$(MKCONFIG) -a TQM8260 ppc mpc8260 tqm8260
VoVPN-GW_66MHz_config \
VoVPN-GW_100MHz_config: unconfig
- @echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > include/config.h
- @./mkconfig -a VoVPN-GW ppc mpc8260 vovpn-gw funkwerk
+ @mkdir -p $(obj)include
+ @echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > $(obj)include/config.h
+ @$(MKCONFIG) -a VoVPN-GW ppc mpc8260 vovpn-gw funkwerk
ZPC1900_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8260 zpc1900
+ @$(MKCONFIG) $(@:_config=) ppc mpc8260 zpc1900
#########################################################################
## Coldfire
#########################################################################
cobra5272_config : unconfig
- @./mkconfig $(@:_config=) m68k mcf52x2 cobra5272
+ @$(MKCONFIG) $(@:_config=) m68k mcf52x2 cobra5272
EB+MCF-EV123_config : unconfig
- @ >include/config.h
- @echo "TEXT_BASE = 0xFFE00000"|tee board/BuS/EB+MCF-EV123/textbase.mk
- @./mkconfig EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
+ @mkdir -p $(obj)include
+ @mkdir -p $(obj)board/BuS/EB+MCF-EV123
+ @ >$(obj)include/config.h
+ @echo "TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
+ @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
EB+MCF-EV123_internal_config : unconfig
- @ >include/config.h
- @echo "TEXT_BASE = 0xF0000000"|tee board/BuS/EB+MCF-EV123/textbase.mk
- @./mkconfig EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
+ @mkdir -p $(obj)include
+ @mkdir -p $(obj)board/BuS/EB+MCF-EV123
+ @ >$(obj)include/config.h
+ @echo "TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
+ @$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
M5271EVB_config : unconfig
- @./mkconfig $(@:_config=) m68k mcf52x2 m5271evb
+ @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5271evb
M5272C3_config : unconfig
- @./mkconfig $(@:_config=) m68k mcf52x2 m5272c3
+ @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5272c3
M5282EVB_config : unconfig
- @./mkconfig $(@:_config=) m68k mcf52x2 m5282evb
+ @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5282evb
TASREG_config : unconfig
- @./mkconfig $(@:_config=) m68k mcf52x2 tasreg esd
+ @$(MKCONFIG) $(@:_config=) m68k mcf52x2 tasreg esd
r5200_config : unconfig
- @./mkconfig $(@:_config=) m68k mcf52x2 r5200
+ @$(MKCONFIG) $(@:_config=) m68k mcf52x2 r5200
#########################################################################
## MPC83xx Systems
#########################################################################
MPC8349ADS_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc83xx mpc8349ads
+ @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349ads
TQM834x_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc83xx tqm834x
+ @$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x
MPC8349EMDS_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc83xx mpc8349emds
+ @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds
#########################################################################
## MPC85xx Systems
#########################################################################
MPC8540ADS_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc85xx mpc8540ads
+ @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8540ads
MPC8540EVAL_config \
MPC8540EVAL_33_config \
MPC8540EVAL_66_config \
MPC8540EVAL_33_slave_config \
MPC8540EVAL_66_slave_config: unconfig
- @echo "" >include/config.h ; \
+ @mkdir -p $(obj)include
+ @echo "" >$(obj)include/config.h ; \
if [ "$(findstring _33_,$@)" ] ; then \
echo -n "... 33 MHz PCI" ; \
else \
- echo "#define CONFIG_SYSCLK_66M" >>include/config.h ; \
+ echo "#define CONFIG_SYSCLK_66M" >>$(obj)include/config.h ; \
echo -n "... 66 MHz PCI" ; \
fi ; \
if [ "$(findstring _slave_,$@)" ] ; then \
- echo "#define CONFIG_PCI_SLAVE" >>include/config.h ; \
+ echo "#define CONFIG_PCI_SLAVE" >>$(obj)include/config.h ; \
echo " slave" ; \
else \
echo " host" ; \
fi
- @./mkconfig -a MPC8540EVAL ppc mpc85xx mpc8540eval
+ @$(MKCONFIG) -a MPC8540EVAL ppc mpc85xx mpc8540eval
MPC8560ADS_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc85xx mpc8560ads
+ @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8560ads
MPC8541CDS_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc85xx mpc8541cds cds
+ @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8541cds cds
MPC8548CDS_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc85xx mpc8548cds cds
+ @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8548cds cds
MPC8555CDS_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc85xx mpc8555cds cds
+ @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8555cds cds
PM854_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc85xx pm854
+ @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm854
PM856_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc85xx pm856
+ @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm856
sbc8540_config \
sbc8540_33_config \
sbc8540_66_config: unconfig
+ @mkdir -p $(obj)include
@if [ "$(findstring _66_,$@)" ] ; then \
- echo "#define CONFIG_PCI_66" >>include/config.h ; \
+ echo "#define CONFIG_PCI_66" >>$(obj)include/config.h ; \
echo "... 66 MHz PCI" ; \
else \
- >include/config.h ; \
+ >$(obj)include/config.h ; \
echo "... 33 MHz PCI" ; \
fi
- @./mkconfig -a SBC8540 ppc mpc85xx sbc8560
+ @$(MKCONFIG) -a SBC8540 ppc mpc85xx sbc8560
sbc8560_config \
sbc8560_33_config \
sbc8560_66_config: unconfig
+ @mkdir -p $(obj)include
@if [ "$(findstring _66_,$@)" ] ; then \
- echo "#define CONFIG_PCI_66" >>include/config.h ; \
+ echo "#define CONFIG_PCI_66" >>$(obj)include/config.h ; \
echo "... 66 MHz PCI" ; \
else \
- >include/config.h ; \
+ >$(obj)include/config.h ; \
echo "... 33 MHz PCI" ; \
fi
- @./mkconfig -a sbc8560 ppc mpc85xx sbc8560
+ @$(MKCONFIG) -a sbc8560 ppc mpc85xx sbc8560
stxgp3_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc85xx stxgp3
+ @$(MKCONFIG) $(@:_config=) ppc mpc85xx stxgp3
TQM8540_config \
TQM8541_config \
TQM8555_config \
TQM8560_config: unconfig
+ @mkdir -p $(obj)include
@CTYPE=$(subst TQM,,$(@:_config=)); \
- >include/config.h ; \
+ >$(obj)include/config.h ; \
echo "... TQM"$${CTYPE}; \
- echo "#define CONFIG_MPC$${CTYPE}">>include/config.h; \
- echo "#define CONFIG_TQM$${CTYPE}">>include/config.h; \
- echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>include/config.h; \
- echo "#define CONFIG_BOARDNAME \"TQM$${CTYPE}\"">>include/config.h; \
- echo "#define CFG_BOOTFILE \"bootfile=/tftpboot/tqm$${CTYPE}/uImage\0\"">>include/config.h
- @./mkconfig -a TQM85xx ppc mpc85xx tqm85xx
+ echo "#define CONFIG_MPC$${CTYPE}">>$(obj)include/config.h; \
+ echo "#define CONFIG_TQM$${CTYPE}">>$(obj)include/config.h; \
+ echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \
+ echo "#define CONFIG_BOARDNAME \"TQM$${CTYPE}\"">>$(obj)include/config.h; \
+ echo "#define CFG_BOOTFILE \"bootfile=/tftpboot/tqm$${CTYPE}/uImage\0\"">>$(obj)include/config.h
+ @$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx
#########################################################################
## 74xx/7xx Systems
#########################################################################
AmigaOneG3SE_config: unconfig
- @./mkconfig $(@:_config=) ppc 74xx_7xx AmigaOneG3SE MAI
+ @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx AmigaOneG3SE MAI
BAB7xx_config: unconfig
- @./mkconfig $(@:_config=) ppc 74xx_7xx bab7xx eltec
+ @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx bab7xx eltec
CPCI750_config: unconfig
- @./mkconfig CPCI750 ppc 74xx_7xx cpci750 esd
+ @$(MKCONFIG) CPCI750 ppc 74xx_7xx cpci750 esd
DB64360_config: unconfig
- @./mkconfig DB64360 ppc 74xx_7xx db64360 Marvell
+ @$(MKCONFIG) DB64360 ppc 74xx_7xx db64360 Marvell
DB64460_config: unconfig
- @./mkconfig DB64460 ppc 74xx_7xx db64460 Marvell
+ @$(MKCONFIG) DB64460 ppc 74xx_7xx db64460 Marvell
ELPPC_config: unconfig
- @./mkconfig $(@:_config=) ppc 74xx_7xx elppc eltec
+ @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx elppc eltec
EVB64260_config \
EVB64260_750CX_config: unconfig
- @./mkconfig EVB64260 ppc 74xx_7xx evb64260
+ @$(MKCONFIG) EVB64260 ppc 74xx_7xx evb64260
P3G4_config: unconfig
- @./mkconfig $(@:_config=) ppc 74xx_7xx evb64260
+ @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260
PCIPPC2_config \
PCIPPC6_config: unconfig
- @./mkconfig $(@:_config=) ppc 74xx_7xx pcippc2
+ @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx pcippc2
ZUMA_config: unconfig
- @./mkconfig $(@:_config=) ppc 74xx_7xx evb64260
+ @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260
ppmc7xx_config: unconfig
- @./mkconfig $(@:_config=) ppc 74xx_7xx ppmc7xx
+ @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx ppmc7xx
#========================================================================
# ARM
@@ -1513,19 +1712,19 @@ ppmc7xx_config: unconfig
#########################################################################
assabet_config : unconfig
- @./mkconfig $(@:_config=) arm sa1100 assabet
+ @$(MKCONFIG) $(@:_config=) arm sa1100 assabet
dnp1110_config : unconfig
- @./mkconfig $(@:_config=) arm sa1100 dnp1110
+ @$(MKCONFIG) $(@:_config=) arm sa1100 dnp1110
gcplus_config : unconfig
- @./mkconfig $(@:_config=) arm sa1100 gcplus
+ @$(MKCONFIG) $(@:_config=) arm sa1100 gcplus
lart_config : unconfig
- @./mkconfig $(@:_config=) arm sa1100 lart
+ @$(MKCONFIG) $(@:_config=) arm sa1100 lart
shannon_config : unconfig
- @./mkconfig $(@:_config=) arm sa1100 shannon
+ @$(MKCONFIG) $(@:_config=) arm sa1100 shannon
#########################################################################
## ARM92xT Systems
@@ -1538,16 +1737,16 @@ xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$
xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1)))
at91rm9200dk_config : unconfig
- @./mkconfig $(@:_config=) arm arm920t at91rm9200dk NULL at91rm9200
+ @$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk NULL at91rm9200
cmc_pu2_config : unconfig
- @./mkconfig $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
+ @$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
csb637_config : unconfig
- @./mkconfig $(@:_config=) arm arm920t csb637 NULL at91rm9200
+ @$(MKCONFIG) $(@:_config=) arm arm920t csb637 NULL at91rm9200
mp2usb_config : unconfig
- @./mkconfig $(@:_config=) arm arm920t mp2usb NULL at91rm9200
+ @$(MKCONFIG) $(@:_config=) arm arm920t mp2usb NULL at91rm9200
########################################################################
@@ -1577,34 +1776,35 @@ cp1026_config: unconfig
@board/integratorcp/split_by_variant.sh $@
kb9202_config : unconfig
- @./mkconfig $(@:_config=) arm arm920t kb9202 NULL at91rm9200
+ @$(MKCONFIG) $(@:_config=) arm arm920t kb9202 NULL at91rm9200
lpd7a400_config \
lpd7a404_config: unconfig
- @./mkconfig $(@:_config=) arm lh7a40x lpd7a40x
+ @$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x
mx1ads_config : unconfig
- @./mkconfig $(@:_config=) arm arm920t mx1ads NULL imx
+ @$(MKCONFIG) $(@:_config=) arm arm920t mx1ads NULL imx
mx1fs2_config : unconfig
- @./mkconfig $(@:_config=) arm arm920t mx1fs2 NULL imx
+ @$(MKCONFIG) $(@:_config=) arm arm920t mx1fs2 NULL imx
netstar_32_config \
netstar_config: unconfig
+ @mkdir -p $(obj)include
@if [ "$(findstring _32_,$@)" ] ; then \
echo "... 32MB SDRAM" ; \
- echo "#define PHYS_SDRAM_1_SIZE SZ_32M" >>include/config.h ; \
+ echo "#define PHYS_SDRAM_1_SIZE SZ_32M" >>$(obj)include/config.h ; \
else \
echo "... 64MB SDRAM" ; \
- echo "#define PHYS_SDRAM_1_SIZE SZ_64M" >>include/config.h ; \
+ echo "#define PHYS_SDRAM_1_SIZE SZ_64M" >>$(obj)include/config.h ; \
fi
- @./mkconfig -a netstar arm arm925t netstar
+ @$(MKCONFIG) -a netstar arm arm925t netstar
omap1510inn_config : unconfig
- @./mkconfig $(@:_config=) arm arm925t omap1510inn
+ @$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn
omap5912osk_config : unconfig
- @./mkconfig $(@:_config=) arm arm926ejs omap5912osk NULL omap
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk NULL omap
omap1610inn_config \
omap1610inn_cs0boot_config \
@@ -1614,72 +1814,76 @@ omap1610h2_config \
omap1610h2_cs0boot_config \
omap1610h2_cs3boot_config \
omap1610h2_cs_autoboot_config: unconfig
+ @mkdir -p $(obj)include
@if [ "$(findstring _cs0boot_, $@)" ] ; then \
- echo "#define CONFIG_CS0_BOOT" >> ./include/config.h ; \
+ echo "#define CONFIG_CS0_BOOT" >> .$(obj)/include/config.h ; \
echo "... configured for CS0 boot"; \
elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \
- echo "#define CONFIG_CS_AUTOBOOT" >> ./include/config.h ; \
+ echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)./include/config.h ; \
echo "... configured for CS_AUTO boot"; \
else \
- echo "#define CONFIG_CS3_BOOT" >> ./include/config.h ; \
+ echo "#define CONFIG_CS3_BOOT" >> $(obj)./include/config.h ; \
echo "... configured for CS3 boot"; \
fi;
- @./mkconfig -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn NULL omap
+ @$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn NULL omap
omap730p2_config \
omap730p2_cs0boot_config \
omap730p2_cs3boot_config : unconfig
+ @mkdir -p $(obj)include
@if [ "$(findstring _cs0boot_, $@)" ] ; then \
- echo "#define CONFIG_CS0_BOOT" >> ./include/config.h ; \
+ echo "#define CONFIG_CS0_BOOT" >> $(obj)include/config.h ; \
echo "... configured for CS0 boot"; \
else \
- echo "#define CONFIG_CS3_BOOT" >> ./include/config.h ; \
+ echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
echo "... configured for CS3 boot"; \
fi;
- @./mkconfig -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 NULL omap
+ @$(MKCONFIG) -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 NULL omap
sbc2410x_config: unconfig
- @./mkconfig $(@:_config=) arm arm920t sbc2410x NULL s3c24x0
+ @$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0
scb9328_config : unconfig
- @./mkconfig $(@:_config=) arm arm920t scb9328 NULL imx
+ @$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx
smdk2400_config : unconfig
- @./mkconfig $(@:_config=) arm arm920t smdk2400 NULL s3c24x0
+ @$(MKCONFIG) $(@:_config=) arm arm920t smdk2400 NULL s3c24x0
smdk2410_config : unconfig
- @./mkconfig $(@:_config=) arm arm920t smdk2410 NULL s3c24x0
+ @$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 NULL s3c24x0
SX1_config : unconfig
- @./mkconfig $(@:_config=) arm arm925t sx1
+ @$(MKCONFIG) $(@:_config=) arm arm925t sx1
# TRAB default configuration: 8 MB Flash, 32 MB RAM
trab_config \
trab_bigram_config \
trab_bigflash_config \
trab_old_config: unconfig
- @ >include/config.h
+ @mkdir -p $(obj)include
+ @mkdir -p $(obj)board/trab
+ @ >$(obj)include/config.h
@[ -z "$(findstring _bigram,$@)" ] || \
- { echo "#define CONFIG_FLASH_8MB" >>include/config.h ; \
- echo "#define CONFIG_RAM_32MB" >>include/config.h ; \
+ { echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_RAM_32MB" >>$(obj)include/config.h ; \
echo "... with 8 MB Flash, 32 MB RAM" ; \
}
@[ -z "$(findstring _bigflash,$@)" ] || \
- { echo "#define CONFIG_FLASH_16MB" >>include/config.h ; \
- echo "#define CONFIG_RAM_16MB" >>include/config.h ; \
+ { echo "#define CONFIG_FLASH_16MB" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \
echo "... with 16 MB Flash, 16 MB RAM" ; \
- echo "TEXT_BASE = 0x0CF40000" >board/trab/config.tmp ; \
+ echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
}
@[ -z "$(findstring _old,$@)" ] || \
- { echo "#define CONFIG_FLASH_8MB" >>include/config.h ; \
- echo "#define CONFIG_RAM_16MB" >>include/config.h ; \
+ { echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \
echo "... with 8 MB Flash, 16 MB RAM" ; \
- echo "TEXT_BASE = 0x0CF40000" >board/trab/config.tmp ; \
+ echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
}
- @./mkconfig -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0
+ @$(MKCONFIG) -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0
VCMA9_config : unconfig
- @./mkconfig $(@:_config=) arm arm920t vcma9 mpl s3c24x0
+ @$(MKCONFIG) $(@:_config=) arm arm920t vcma9 mpl s3c24x0
#========================================================================
# ARM supplied Versatile development boards
@@ -1691,117 +1895,120 @@ versatilepb_config : unconfig
voiceblue_smallflash_config \
voiceblue_config: unconfig
+ @mkdir -p $(obj)include
+ @mkdir -p $(obj)board/voiceblue
@if [ "$(findstring _smallflash_,$@)" ] ; then \
echo "... boot from lower flash bank" ; \
- echo "#define VOICEBLUE_SMALL_FLASH" >>include/config.h ; \
- echo "VOICEBLUE_SMALL_FLASH=y" >board/voiceblue/config.tmp ; \
+ echo "#define VOICEBLUE_SMALL_FLASH" >>$(obj)include/config.h ; \
+ echo "VOICEBLUE_SMALL_FLASH=y" >$(obj)board/voiceblue/config.tmp ; \
else \
echo "... boot from upper flash bank" ; \
- >include/config.h ; \
- echo "VOICEBLUE_SMALL_FLASH=n" >board/voiceblue/config.tmp ; \
+ >$(obj)include/config.h ; \
+ echo "VOICEBLUE_SMALL_FLASH=n" >$(obj)board/voiceblue/config.tmp ; \
fi
- @./mkconfig -a voiceblue arm arm925t voiceblue
+ @$(MKCONFIG) -a voiceblue arm arm925t voiceblue
cm4008_config : unconfig
- @./mkconfig $(@:_config=) arm arm920t cm4008 NULL ks8695
+ @$(MKCONFIG) $(@:_config=) arm arm920t cm4008 NULL ks8695
cm41xx_config : unconfig
- @./mkconfig $(@:_config=) arm arm920t cm41xx NULL ks8695
+ @$(MKCONFIG) $(@:_config=) arm arm920t cm41xx NULL ks8695
gth2_config : unconfig
- @ >include/config.h
- @echo "#define CONFIG_GTH2 1" >>include/config.h
- @./mkconfig -a gth2 mips mips gth2
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
+ @echo "#define CONFIG_GTH2 1" >>$(obj)include/config.h
+ @$(MKCONFIG) -a gth2 mips mips gth2
#########################################################################
## S3C44B0 Systems
#########################################################################
B2_config : unconfig
- @./mkconfig $(@:_config=) arm s3c44b0 B2 dave
+ @$(MKCONFIG) $(@:_config=) arm s3c44b0 B2 dave
#########################################################################
## ARM720T Systems
#########################################################################
armadillo_config: unconfig
- @./mkconfig $(@:_config=) arm arm720t armadillo
+ @$(MKCONFIG) $(@:_config=) arm arm720t armadillo
ep7312_config : unconfig
- @./mkconfig $(@:_config=) arm arm720t ep7312
+ @$(MKCONFIG) $(@:_config=) arm arm720t ep7312
impa7_config : unconfig
- @./mkconfig $(@:_config=) arm arm720t impa7
+ @$(MKCONFIG) $(@:_config=) arm arm720t impa7
modnet50_config : unconfig
- @./mkconfig $(@:_config=) arm arm720t modnet50
+ @$(MKCONFIG) $(@:_config=) arm arm720t modnet50
evb4510_config : unconfig
- @./mkconfig $(@:_config=) arm arm720t evb4510
+ @$(MKCONFIG) $(@:_config=) arm arm720t evb4510
#########################################################################
## XScale Systems
#########################################################################
adsvix_config : unconfig
- @./mkconfig $(@:_config=) arm pxa adsvix
+ @$(MKCONFIG) $(@:_config=) arm pxa adsvix
cerf250_config : unconfig
- @./mkconfig $(@:_config=) arm pxa cerf250
+ @$(MKCONFIG) $(@:_config=) arm pxa cerf250
cradle_config : unconfig
- @./mkconfig $(@:_config=) arm pxa cradle
+ @$(MKCONFIG) $(@:_config=) arm pxa cradle
csb226_config : unconfig
- @./mkconfig $(@:_config=) arm pxa csb226
+ @$(MKCONFIG) $(@:_config=) arm pxa csb226
delta_config :
- @./mkconfig $(@:_config=) arm pxa delta
+ @$(MKCONFIG) $(@:_config=) arm pxa delta
innokom_config : unconfig
- @./mkconfig $(@:_config=) arm pxa innokom
+ @$(MKCONFIG) $(@:_config=) arm pxa innokom
ixdp425_config : unconfig
- @./mkconfig $(@:_config=) arm ixp ixdp425
+ @$(MKCONFIG) $(@:_config=) arm ixp ixdp425
ixdpg425_config : unconfig
- @./mkconfig $(@:_config=) arm ixp ixdp425
+ @$(MKCONFIG) $(@:_config=) arm ixp ixdp425
lubbock_config : unconfig
- @./mkconfig $(@:_config=) arm pxa lubbock
+ @$(MKCONFIG) $(@:_config=) arm pxa lubbock
pleb2_config : unconfig
- @./mkconfig $(@:_config=) arm pxa pleb2
+ @$(MKCONFIG) $(@:_config=) arm pxa pleb2
logodl_config : unconfig
- @./mkconfig $(@:_config=) arm pxa logodl
+ @$(MKCONFIG) $(@:_config=) arm pxa logodl
pdnb3_config : unconfig
- @./mkconfig $(@:_config=) arm ixp pdnb3 prodrive
+ @$(MKCONFIG) $(@:_config=) arm ixp pdnb3 prodrive
pxa255_idp_config: unconfig
- @./mkconfig $(@:_config=) arm pxa pxa255_idp
+ @$(MKCONFIG) $(@:_config=) arm pxa pxa255_idp
wepep250_config : unconfig
- @./mkconfig $(@:_config=) arm pxa wepep250
+ @$(MKCONFIG) $(@:_config=) arm pxa wepep250
xaeniax_config : unconfig
- @./mkconfig $(@:_config=) arm pxa xaeniax
+ @$(MKCONFIG) $(@:_config=) arm pxa xaeniax
xm250_config : unconfig
- @./mkconfig $(@:_config=) arm pxa xm250
+ @$(MKCONFIG) $(@:_config=) arm pxa xm250
xsengine_config : unconfig
- @./mkconfig $(@:_config=) arm pxa xsengine
+ @$(MKCONFIG) $(@:_config=) arm pxa xsengine
zylonite_config :
- @./mkconfig $(@:_config=) arm pxa zylonite
+ @$(MKCONFIG) $(@:_config=) arm pxa zylonite
#########################################################################
## ARM1136 Systems
#########################################################################
omap2420h4_config : unconfig
- @./mkconfig $(@:_config=) arm arm1136 omap2420h4
+ @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4
#========================================================================
# i386
@@ -1810,13 +2017,13 @@ omap2420h4_config : unconfig
## AMD SC520 CDP
#########################################################################
sc520_cdp_config : unconfig
- @./mkconfig $(@:_config=) i386 i386 sc520_cdp
+ @$(MKCONFIG) $(@:_config=) i386 i386 sc520_cdp
sc520_spunk_config : unconfig
- @./mkconfig $(@:_config=) i386 i386 sc520_spunk
+ @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk
sc520_spunk_rel_config : unconfig
- @./mkconfig $(@:_config=) i386 i386 sc520_spunk
+ @$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk
#========================================================================
# MIPS
@@ -1831,63 +2038,70 @@ incaip_100MHz_config \
incaip_133MHz_config \
incaip_150MHz_config \
incaip_config: unconfig
- @ >include/config.h
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
@[ -z "$(findstring _100MHz,$@)" ] || \
- { echo "#define CPU_CLOCK_RATE 100000000" >>include/config.h ; \
+ { echo "#define CPU_CLOCK_RATE 100000000" >>$(obj)include/config.h ; \
echo "... with 100MHz system clock" ; \
}
@[ -z "$(findstring _133MHz,$@)" ] || \
- { echo "#define CPU_CLOCK_RATE 133000000" >>include/config.h ; \
+ { echo "#define CPU_CLOCK_RATE 133000000" >>$(obj)include/config.h ; \
echo "... with 133MHz system clock" ; \
}
@[ -z "$(findstring _150MHz,$@)" ] || \
- { echo "#define CPU_CLOCK_RATE 150000000" >>include/config.h ; \
+ { echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h ; \
echo "... with 150MHz system clock" ; \
}
- @./mkconfig -a $(call xtract_incaip,$@) mips mips incaip
+ @$(MKCONFIG) -a $(call xtract_incaip,$@) mips mips incaip
tb0229_config: unconfig
- @./mkconfig $(@:_config=) mips mips tb0229
+ @$(MKCONFIG) $(@:_config=) mips mips tb0229
#########################################################################
## MIPS32 AU1X00
#########################################################################
dbau1000_config : unconfig
- @ >include/config.h
- @echo "#define CONFIG_DBAU1000 1" >>include/config.h
- @./mkconfig -a dbau1x00 mips mips dbau1x00
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
+ @echo "#define CONFIG_DBAU1000 1" >>$(obj)include/config.h
+ @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
dbau1100_config : unconfig
- @ >include/config.h
- @echo "#define CONFIG_DBAU1100 1" >>include/config.h
- @./mkconfig -a dbau1x00 mips mips dbau1x00
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
+ @echo "#define CONFIG_DBAU1100 1" >>$(obj)include/config.h
+ @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
dbau1500_config : unconfig
- @ >include/config.h
- @echo "#define CONFIG_DBAU1500 1" >>include/config.h
- @./mkconfig -a dbau1x00 mips mips dbau1x00
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
+ @echo "#define CONFIG_DBAU1500 1" >>$(obj)include/config.h
+ @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
dbau1550_config : unconfig
- @ >include/config.h
- @echo "#define CONFIG_DBAU1550 1" >>include/config.h
- @./mkconfig -a dbau1x00 mips mips dbau1x00
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
+ @echo "#define CONFIG_DBAU1550 1" >>$(obj)include/config.h
+ @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
dbau1550_el_config : unconfig
- @ >include/config.h
- @echo "#define CONFIG_DBAU1550 1" >>include/config.h
- @./mkconfig -a dbau1x00 mips mips dbau1x00
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
+ @echo "#define CONFIG_DBAU1550 1" >>$(obj)include/config.h
+ @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
pb1000_config : unconfig
- @ >include/config.h
- @echo "#define CONFIG_PB1000 1" >>include/config.h
- @./mkconfig -a pb1x00 mips mips pb1x00
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
+ @echo "#define CONFIG_PB1000 1" >>$(obj)include/config.h
+ @$(MKCONFIG) -a pb1x00 mips mips pb1x00
#########################################################################
## MIPS64 5Kc
#########################################################################
purple_config : unconfig
- @./mkconfig $(@:_config=) mips mips purple
+ @$(MKCONFIG) $(@:_config=) mips mips purple
#========================================================================
# Nios
@@ -1899,80 +2113,83 @@ purple_config : unconfig
DK1C20_safe_32_config \
DK1C20_standard_32_config \
DK1C20_config: unconfig
- @ >include/config.h
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
@[ -z "$(findstring _safe_32,$@)" ] || \
- { echo "#define CONFIG_NIOS_SAFE_32 1" >>include/config.h ; \
+ { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \
echo "... NIOS 'safe_32' configuration" ; \
}
@[ -z "$(findstring _standard_32,$@)" ] || \
- { echo "#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h ; \
+ { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
echo "... NIOS 'standard_32' configuration" ; \
}
@[ -z "$(findstring DK1C20_config,$@)" ] || \
- { echo "#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h ; \
+ { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
echo "... NIOS 'standard_32' configuration (DEFAULT)" ; \
}
- @./mkconfig -a DK1C20 nios nios dk1c20 altera
+ @$(MKCONFIG) -a DK1C20 nios nios dk1c20 altera
DK1S10_safe_32_config \
DK1S10_standard_32_config \
DK1S10_mtx_ldk_20_config \
DK1S10_config: unconfig
- @ >include/config.h
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
@[ -z "$(findstring _safe_32,$@)" ] || \
- { echo "#define CONFIG_NIOS_SAFE_32 1" >>include/config.h ; \
+ { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \
echo "... NIOS 'safe_32' configuration" ; \
}
@[ -z "$(findstring _standard_32,$@)" ] || \
- { echo "#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h ; \
+ { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
echo "... NIOS 'standard_32' configuration" ; \
}
@[ -z "$(findstring _mtx_ldk_20,$@)" ] || \
- { echo "#define CONFIG_NIOS_MTX_LDK_20 1" >>include/config.h ; \
+ { echo "#define CONFIG_NIOS_MTX_LDK_20 1" >>$(obj)include/config.h ; \
echo "... NIOS 'mtx_ldk_20' configuration" ; \
}
@[ -z "$(findstring DK1S10_config,$@)" ] || \
- { echo "#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h ; \
+ { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
echo "... NIOS 'standard_32' configuration (DEFAULT)" ; \
}
- @./mkconfig -a DK1S10 nios nios dk1s10 altera
+ @$(MKCONFIG) -a DK1S10 nios nios dk1s10 altera
ADNPESC1_DNPEVA2_base_32_config \
ADNPESC1_base_32_config \
ADNPESC1_config: unconfig
- @ >include/config.h
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
@[ -z "$(findstring _DNPEVA2,$@)" ] || \
- { echo "#define CONFIG_DNPEVA2 1" >>include/config.h ; \
+ { echo "#define CONFIG_DNPEVA2 1" >>$(obj)include/config.h ; \
echo "... DNP/EVA2 configuration" ; \
}
@[ -z "$(findstring _base_32,$@)" ] || \
- { echo "#define CONFIG_NIOS_BASE_32 1" >>include/config.h ; \
+ { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
echo "... NIOS 'base_32' configuration" ; \
}
@[ -z "$(findstring ADNPESC1_config,$@)" ] || \
- { echo "#define CONFIG_NIOS_BASE_32 1" >>include/config.h ; \
+ { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
echo "... NIOS 'base_32' configuration (DEFAULT)" ; \
}
- @./mkconfig -a ADNPESC1 nios nios adnpesc1 ssv
+ @$(MKCONFIG) -a ADNPESC1 nios nios adnpesc1 ssv
#########################################################################
## Nios-II
#########################################################################
EP1C20_config : unconfig
- @./mkconfig EP1C20 nios2 nios2 ep1c20 altera
+ @$(MKCONFIG) EP1C20 nios2 nios2 ep1c20 altera
EP1S10_config : unconfig
- @./mkconfig EP1S10 nios2 nios2 ep1s10 altera
+ @$(MKCONFIG) EP1S10 nios2 nios2 ep1s10 altera
EP1S40_config : unconfig
- @./mkconfig EP1S40 nios2 nios2 ep1s40 altera
+ @$(MKCONFIG) EP1S40 nios2 nios2 ep1s40 altera
PK1C20_config : unconfig
- @./mkconfig PK1C20 nios2 nios2 pk1c20 psyent
+ @$(MKCONFIG) PK1C20 nios2 nios2 pk1c20 psyent
PCI5441_config : unconfig
- @./mkconfig PCI5441 nios2 nios2 pci5441 psyent
+ @$(MKCONFIG) PCI5441 nios2 nios2 pci5441 psyent
#========================================================================
# MicroBlaze
@@ -1981,62 +2198,72 @@ PCI5441_config : unconfig
## Microblaze
#########################################################################
suzaku_config: unconfig
- @ >include/config.h
- @echo "#define CONFIG_SUZAKU 1" >> include/config.h
- @./mkconfig -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
+ @echo "#define CONFIG_SUZAKU 1" >> $(obj)include/config.h
+ @$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno
#########################################################################
## Blackfin
#########################################################################
ezkit533_config : unconfig
- @./mkconfig $(@:_config=) blackfin bf533 ezkit533
+ @$(MKCONFIG) $(@:_config=) blackfin bf533 ezkit533
stamp_config : unconfig
- @./mkconfig $(@:_config=) blackfin bf533 stamp
+ @$(MKCONFIG) $(@:_config=) blackfin bf533 stamp
dspstamp_config : unconfig
- @./mkconfig $(@:_config=) blackfin bf533 dsp_stamp
+ @$(MKCONFIG) $(@:_config=) blackfin bf533 dsp_stamp
#########################################################################
#########################################################################
#########################################################################
clean:
- find . -type f \
+ find $(OBJTREE) -type f \
\( -name 'core' -o -name '*.bak' -o -name '*~' \
-o -name '*.o' -o -name '*.a' \) -print \
| xargs rm -f
- rm -f examples/hello_world examples/timer \
- examples/eepro100_eeprom examples/sched \
- examples/mem_to_mem_idma2intr examples/82559_eeprom \
- examples/smc91111_eeprom \
- examples/test_burst
- rm -f tools/img2srec tools/mkimage tools/envcrc tools/gen_eth_addr
- rm -f tools/mpc86x_clk tools/ncb
- rm -f tools/easylogo/easylogo tools/bmp_logo
- rm -f tools/gdb/astest tools/gdb/gdbcont tools/gdb/gdbsend
- rm -f tools/env/fw_printenv tools/env/fw_setenv
- rm -f board/cray/L1/bootscript.c board/cray/L1/bootscript.image
- rm -f board/netstar/eeprom board/netstar/crcek
- rm -f board/netstar/*.srec board/netstar/*.bin
- rm -f board/trab/trab_fkt board/voiceblue/eeprom
- rm -f board/integratorap/u-boot.lds board/integratorcp/u-boot.lds
- rm -f include/bmp_logo.h
+ rm -f $(obj)examples/hello_world $(obj)examples/timer \
+ $(obj)examples/eepro100_eeprom $(obj)examples/sched \
+ $(obj)examples/mem_to_mem_idma2intr $(obj)examples/82559_eeprom \
+ $(obj)examples/smc91111_eeprom $(obj)examples/interrupt \
+ $(obj)examples/test_burst
+ rm -f $(obj)tools/img2srec $(obj)tools/mkimage $(obj)tools/envcrc \
+ $(obj)tools/gen_eth_addr
+ rm -f $(obj)tools/mpc86x_clk $(obj)tools/ncb
+ rm -f $(obj)tools/easylogo/easylogo $(obj)tools/bmp_logo
+ rm -f $(obj)tools/gdb/astest $(obj)tools/gdb/gdbcont $(obj)tools/gdb/gdbsend
+ rm -f $(obj)tools/env/fw_printenv $(obj)tools/env/fw_setenv
+ rm -f $(obj)board/cray/L1/bootscript.c $(obj)board/cray/L1/bootscript.image
+ rm -f $(obj)board/netstar/eeprom $(obj)board/netstar/crcek $(obj)board/netstar/crcit
+ rm -f $(obj)board/netstar/*.srec $(obj)board/netstar/*.bin
+ rm -f $(obj)board/trab/trab_fkt $(obj)board/voiceblue/eeprom
+ rm -f $(obj)board/integratorap/u-boot.lds $(obj)board/integratorcp/u-boot.lds
+ rm -f $(obj)include/bmp_logo.h
+ find nand_spl -lname "*" -print | xargs rm -f
+ rm -f nand_spl/u-boot-spl nand_spl/u-boot-spl.map
clobber: clean
- find . -type f \( -name .depend \
+ find $(OBJTREE) -type f \( -name .depend \
-o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \
-print0 \
| xargs -0 rm -f
- rm -f $(OBJS) *.bak tags TAGS include/version_autogenerated.h
- rm -fr *.*~
- rm -f u-boot u-boot.map u-boot.hex $(ALL)
- rm -f tools/crc32.c tools/environment.c tools/env/crc32.c
- rm -f tools/inca-swap-bytes cpu/mpc824x/bedbug_603e.c
- rm -f include/asm/proc include/asm/arch include/asm
-
+ rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS $(obj)include/version_autogenerated.h
+ rm -fr $(obj)*.*~
+ rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL)
+ rm -f $(obj)tools/crc32.c $(obj)tools/environment.c $(obj)tools/env/crc32.c
+ rm -f $(obj)tools/inca-swap-bytes $(obj)cpu/mpc824x/bedbug_603e.c
+ rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
+
+ifeq ($(OBJTREE),$(SRCTREE))
mrproper \
distclean: clobber unconfig
+else
+mrproper \
+distclean: clobber unconfig
+ rm -rf $(OBJTREE)/*
+endif
backup:
F=`basename $(TOPDIR)` ; cd .. ; \
diff --git a/README b/README
index e772c1a..a0949f0 100644
--- a/README
+++ b/README
@@ -2323,6 +2323,26 @@ images ready for download to / installation on your system:
- "u-boot" is an image in ELF binary format
- "u-boot.srec" is in Motorola S-Record format
+By default the build is performed locally and the objects are saved
+in the source directory. One of the two methods can be used to change
+this behavior and build U-Boot to some external directory:
+
+1. Add O= to the make command line invocations:
+
+ make O=/tmp/build distclean
+ make O=/tmp/build NAME_config
+ make O=/tmp/build all
+
+2. Set environment variable BUILD_DIR to point to the desired location:
+
+ export BUILD_DIR=/tmp/build
+ make distclean
+ make NAME_config
+ make all
+
+Note that the command line "O=" setting overrides the BUILD_DIR environment
+variable.
+
Please be aware that the Makefiles assume you are using GNU make, so
for instance on NetBSD you might need to use "gmake" instead of
@@ -2376,6 +2396,22 @@ or to build on a native PowerPC system you can type
CROSS_COMPILE=' ' MAKEALL
+When using the MAKEALL script, the default behaviour is to build U-Boot
+in the source directory. This location can be changed by setting the
+BUILD_DIR environment variable. Also, for each target built, the MAKEALL
+script saves two log files (<target>.ERR and <target>.MAKEALL) in the
+<source dir>/LOG directory. This default location can be changed by
+setting the MAKEALL_LOGDIR environment variable. For example:
+
+ export BUILD_DIR=/tmp/build
+ export MAKEALL_LOGDIR=/tmp/log
+ CROSS_COMPILE=ppc_8xx- MAKEALL
+
+With the above settings build objects are saved in the /tmp/build, log
+files are saved in the /tmp/log and the source tree remains clean during
+the whole build process.
+
+
See also "U-Boot Porting Guide" below.
@@ -3469,12 +3505,19 @@ Coding Standards:
-----------------
All contributions to U-Boot should conform to the Linux kernel
-coding style; see the file "Documentation/CodingStyle" in your Linux
-kernel source directory.
-
-Please note that U-Boot is implemented in C (and to some small parts
-in Assembler); no C++ is used, so please do not use C++ style
-comments (//) in your code.
+coding style; see the file "Documentation/CodingStyle" and the script
+"scripts/Lindent" in your Linux kernel source directory. In sources
+originating from U-Boot a style corresponding to "Lindent -pcs" (adding
+spaces before parameters to function calls) is actually used.
+
+Source files originating from a different project (for example the
+MTD subsystem) are generally exempt from these guidelines and are not
+reformated to ease subsequent migration to newer versions of those
+sources.
+
+Please note that U-Boot is implemented in C (and to some small parts in
+Assembler); no C++ is used, so please do not use C++ style comments (//)
+in your code.
Please also stick to the following formatting rules:
- remove any trailing white space
diff --git a/board/AtmarkTechno/suzaku/Makefile b/board/AtmarkTechno/suzaku/Makefile
index 7a17067..b420269 100644
--- a/board/AtmarkTechno/suzaku/Makefile
+++ b/board/AtmarkTechno/suzaku/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2003
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/BuS/EB+MCF-EV123/Makefile b/board/BuS/EB+MCF-EV123/Makefile
index 0596572..57363bc 100644
--- a/board/BuS/EB+MCF-EV123/Makefile
+++ b/board/BuS/EB+MCF-EV123/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2003
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o cfm_flash.o flash.o VCxK.o
+COBJS = $(BOARD).o cfm_flash.o flash.o VCxK.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/BuS/EB+MCF-EV123/textbase.mk b/board/BuS/EB+MCF-EV123/textbase.mk
index 10106f4..ecde6ed 100644
--- a/board/BuS/EB+MCF-EV123/textbase.mk
+++ b/board/BuS/EB+MCF-EV123/textbase.mk
@@ -1 +1 @@
-TEXT_BASE = 0xF0000000
+TEXT_BASE = 0xFFE00000
diff --git a/board/LEOX/elpt860/Makefile b/board/LEOX/elpt860/Makefile
index 3e73163..4304494 100644
--- a/board/LEOX/elpt860/Makefile
+++ b/board/LEOX/elpt860/Makefile
@@ -4,6 +4,9 @@
# Copyright (C) 2000, 2001, 2002, 2003
# The LEOX team <team@leox.org>, http://www.leox.org
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# LEOX.org is about the development of free hardware and software resources
# for system on chip.
#
@@ -31,18 +34,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
+
+COBJS = $(BOARD).o flash.o
-OBJS = $(BOARD).o flash.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): .depend $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/MAI/AmigaOneG3SE/Makefile b/board/MAI/AmigaOneG3SE/Makefile
index b1247fe..e920482 100644
--- a/board/MAI/AmigaOneG3SE/Makefile
+++ b/board/MAI/AmigaOneG3SE/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2002
+# (C) Copyright 2002-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,8 +22,12 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../menu)
+$(shell mkdir -p $(obj)../bios_emulator)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
COBJS = $(BOARD).o articiaS.o flash.o serial.o smbus.o articiaS_pci.o \
via686.o i8259.o ../bios_emulator/x86interface.o \
@@ -31,26 +35,29 @@ COBJS = $(BOARD).o articiaS.o flash.o serial.o smbus.o articiaS_pci.o \
interrupts.o ps2kbd.o video.o usb_uhci.o enet.o \
../menu/cmd_menu.o cmd_boota.o nvram.o
-AOBJS = board_asm_init.o memio.o
-
-OBJS = $(COBJS) $(AOBJS)
+SOBJS = board_asm_init.o memio.o
EMUDIR = ../bios_emulator/scitech/src/x86emu/
EMUOBJ = $(EMUDIR)decode.o $(EMUDIR)ops2.o $(EMUDIR)fpu.o $(EMUDIR)prim_ops.o \
$(EMUDIR)ops.o $(EMUDIR)sys.o
-EMUSRC = $(EMUOBJ:.o=.c)
+EMUSRC = $(EMUOBJ:.o=.c)
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+EMUOBJ := $(addprefix $(obj),$(EMUOBJ))
-$(LIB): .depend $(OBJS) $(EMUSRC)
- make libx86emu.a -C ../bios_emulator/scitech/src/x86emu -f makefile.uboot CROSS_COMPILE=$(CROSS_COMPILE)
+$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(EMUSRC)
+ make $(obj)libx86emu.a -C ../bios_emulator/scitech/src/x86emu -f makefile.uboot CROSS_COMPILE=$(CROSS_COMPILE)
-rm $(LIB)
- $(AR) crv $@ $(OBJS) $(EMUOBJ)
+ $(AR) crv $@ $(OBJS) $(SOBJS) $(EMUOBJ)
#########################################################################
-.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/Marvell/db64360/Makefile b/board/Marvell/db64360/Makefile
index 768ccdd..a084c89 100644
--- a/board/Marvell/db64360/Makefile
+++ b/board/Marvell/db64360/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2001
# Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
#
@@ -22,23 +25,30 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
SOBJS = ../common/misc.o
-OBJS = $(BOARD).o ../common/flash.o ../common/serial.o ../common/memory.o pci.o \
+COBJS = $(BOARD).o ../common/flash.o ../common/serial.o ../common/memory.o pci.o \
mv_eth.o ../common/ns16550.o mpsc.o ../common/i2c.o \
sdram_init.o ../common/intel_flash.o
-$(LIB): .depend $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/Marvell/db64460/Makefile b/board/Marvell/db64460/Makefile
index 768ccdd..a084c89 100644
--- a/board/Marvell/db64460/Makefile
+++ b/board/Marvell/db64460/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2001
# Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
#
@@ -22,23 +25,30 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
SOBJS = ../common/misc.o
-OBJS = $(BOARD).o ../common/flash.o ../common/serial.o ../common/memory.o pci.o \
+COBJS = $(BOARD).o ../common/flash.o ../common/serial.o ../common/memory.o pci.o \
mv_eth.o ../common/ns16550.o mpsc.o ../common/i2c.o \
sdram_init.o ../common/intel_flash.o
-$(LIB): .depend $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/RPXClassic/Makefile b/board/RPXClassic/Makefile
index 93907ba..d8832ac 100644
--- a/board/RPXClassic/Makefile
+++ b/board/RPXClassic/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o eccx.o
+COBJS = $(BOARD).o flash.o eccx.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/RPXlite/Makefile b/board/RPXlite/Makefile
index 13ce9fc..e3d24b3 100644
--- a/board/RPXlite/Makefile
+++ b/board/RPXlite/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/RPXlite_dw/Makefile b/board/RPXlite_dw/Makefile
index d457020..e3d24b3 100644
--- a/board/RPXlite_dw/Makefile
+++ b/board/RPXlite_dw/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/RRvision/Makefile b/board/RRvision/Makefile
index fdc6fd5..e3d24b3 100644
--- a/board/RRvision/Makefile
+++ b/board/RRvision/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/a3000/Makefile b/board/a3000/Makefile
index 5fde362..43c27e9 100644
--- a/board/a3000/Makefile
+++ b/board/a3000/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/adder/Makefile b/board/adder/Makefile
index 9123a80..d0223b5 100644
--- a/board/adder/Makefile
+++ b/board/adder/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# Copyright (C) 2004 Arabella Software Ltd.
# Yuli Barcohen <yuli@arabellasw.com>
#
@@ -23,11 +26,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := $(BOARD).o
-OBJS := $(BOARD).o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(OBJS) $(SOBJS)
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -38,9 +45,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/adsvix/Makefile b/board/adsvix/Makefile
index 24d5d06..0daa383 100644
--- a/board/adsvix/Makefile
+++ b/board/adsvix/Makefile
@@ -1,6 +1,5 @@
-
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -24,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := adsvix.o pcmcia.o
+COBJS := adsvix.o pcmcia.o
SOBJS := lowlevel_init.o pxavoltage.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
clean:
@@ -40,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/alaska/Makefile b/board/alaska/Makefile
index a4c1d2e..969580e 100644
--- a/board/alaska/Makefile
+++ b/board/alaska/Makefile
@@ -1,4 +1,5 @@
-# (C) Copyright 2003-2005
+#
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,11 +23,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := $(BOARD).o flash.o
-OBJS := $(BOARD).o flash.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(OBJS) $(SOBJS)
+$(LIB): $(OBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -37,9 +42,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/altera/dk1c20/Makefile b/board/altera/dk1c20/Makefile
index 9182a4e..26c724c 100644
--- a/board/altera/dk1c20/Makefile
+++ b/board/altera/dk1c20/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001-2004
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,14 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
-
-OBJS := $(BOARD).o flash.o misc.o
+LIB = $(obj)lib$(BOARD).a
+COBJS := $(BOARD).o flash.o misc.o
SOBJS = vectors.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -40,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/altera/dk1s10/Makefile b/board/altera/dk1s10/Makefile
index 9182a4e..26c724c 100644
--- a/board/altera/dk1s10/Makefile
+++ b/board/altera/dk1s10/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001-2004
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,14 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
-
-OBJS := $(BOARD).o flash.o misc.o
+LIB = $(obj)lib$(BOARD).a
+COBJS := $(BOARD).o flash.o misc.o
SOBJS = vectors.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -40,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/altera/ep1c20/Makefile b/board/altera/ep1c20/Makefile
index a92b258..26873b6 100644
--- a/board/altera/ep1c20/Makefile
+++ b/board/altera/ep1c20/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001-2004
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -12,7 +12,7 @@
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
@@ -22,17 +22,22 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
COMOBJS := ../common/AMDLV065D.o ../common/epled.o
-OBJS := $(BOARD).o $(COMOBJS)
+COBJS := $(BOARD).o $(COMOBJS)
-SOBJS =
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) crv $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -42,9 +47,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/altera/ep1s10/Makefile b/board/altera/ep1s10/Makefile
index a92b258..26873b6 100644
--- a/board/altera/ep1s10/Makefile
+++ b/board/altera/ep1s10/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001-2004
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -12,7 +12,7 @@
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
@@ -22,17 +22,22 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
COMOBJS := ../common/AMDLV065D.o ../common/epled.o
-OBJS := $(BOARD).o $(COMOBJS)
+COBJS := $(BOARD).o $(COMOBJS)
-SOBJS =
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) crv $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -42,9 +47,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/altera/ep1s40/Makefile b/board/altera/ep1s40/Makefile
index a92b258..26873b6 100644
--- a/board/altera/ep1s40/Makefile
+++ b/board/altera/ep1s40/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001-2004
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -12,7 +12,7 @@
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
@@ -22,17 +22,22 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
COMOBJS := ../common/AMDLV065D.o ../common/epled.o
-OBJS := $(BOARD).o $(COMOBJS)
+COBJS := $(BOARD).o $(COMOBJS)
-SOBJS =
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) crv $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -42,9 +47,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/amcc/bamboo/Makefile b/board/amcc/bamboo/Makefile
index 5654f91..5f3e34e 100644
--- a/board/amcc/bamboo/Makefile
+++ b/board/amcc/bamboo/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2002
+# (C) Copyright 2002-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o
-OBJS += flash.o
+COBJS = $(BOARD).o flash.o
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
@@ -40,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/amcc/bubinga/Makefile b/board/amcc/bubinga/Makefile
index f5bda55..e78ed5f 100644
--- a/board/amcc/bubinga/Makefile
+++ b/board/amcc/bubinga/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,9 +23,13 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
@@ -38,9 +42,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/amcc/common/flash.c b/board/amcc/common/flash.c
index a0acbba..e6429ec 100644
--- a/board/amcc/common/flash.c
+++ b/board/amcc/common/flash.c
@@ -35,7 +35,7 @@
#include <ppc4xx.h>
#include <asm/processor.h>
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
/*-----------------------------------------------------------------------
* Functions
@@ -76,7 +76,7 @@ void flash_print_info(flash_info_t * info)
case FLASH_MAN_SST:
printf("SST ");
break;
- case FLASH_MAN_MX:
+ case FLASH_MAN_MX:
printf ("MACRONIX ");
break;
default:
@@ -223,75 +223,75 @@ static ulong flash_get_size(vu_long * addr, flash_info_t * info)
return (0); /* no or unknown flash */
}
- value = addr2[1]; /* device ID */
+ value = addr2[1]; /* device ID */
DEBUGF("\nFLASH DEVICEID: %x\n", value);
switch (value) {
case (CFG_FLASH_WORD_SIZE) AMD_ID_LV040B:
info->flash_id += FLASH_AM040;
info->sector_count = 8;
- info->size = 0x0080000; /* => 512 ko */
+ info->size = 0x0080000; /* => 512 KiB */
break;
case (CFG_FLASH_WORD_SIZE) AMD_ID_F040B:
info->flash_id += FLASH_AM040;
info->sector_count = 8;
- info->size = 0x0080000; /* => 512 ko */
+ info->size = 0x0080000; /* => 512 KiB */
break;
case (CFG_FLASH_WORD_SIZE) STM_ID_M29W040B:
info->flash_id += FLASH_AM040;
info->sector_count = 8;
- info->size = 0x0080000; /* => 512 ko */
+ info->size = 0x0080000; /* => 512 KiB */
break;
case (CFG_FLASH_WORD_SIZE) AMD_ID_F016D:
info->flash_id += FLASH_AMD016;
info->sector_count = 32;
- info->size = 0x00200000;
- break; /* => 2 MB */
+ info->size = 0x00200000; /* => 2 MiB */
+ break;
case (CFG_FLASH_WORD_SIZE) AMD_ID_LV033C:
info->flash_id += FLASH_AMDLV033C;
info->sector_count = 64;
- info->size = 0x00400000;
- break; /* => 4 MB */
+ info->size = 0x00400000; /* => 4 MiB */
+ break;
case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400T:
info->flash_id += FLASH_AM400T;
info->sector_count = 11;
- info->size = 0x00080000;
- break; /* => 0.5 MB */
+ info->size = 0x00080000; /* => 512 KiB */
+ break;
case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400B:
info->flash_id += FLASH_AM400B;
info->sector_count = 11;
- info->size = 0x00080000;
- break; /* => 0.5 MB */
+ info->size = 0x00080000; /* => 512 KiB */
+ break;
case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800T:
info->flash_id += FLASH_AM800T;
info->sector_count = 19;
- info->size = 0x00100000;
- break; /* => 1 MB */
+ info->size = 0x00100000; /* => 1 MiB */
+ break;
case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800B:
info->flash_id += FLASH_AM800B;
info->sector_count = 19;
- info->size = 0x00100000;
- break; /* => 1 MB */
+ info->size = 0x00100000; /* => 1 MiB */
+ break;
case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160T:
info->flash_id += FLASH_AM160T;
info->sector_count = 35;
- info->size = 0x00200000;
- break; /* => 2 MB */
+ info->size = 0x00200000; /* => 2 MiB */
+ break;
case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160B:
info->flash_id += FLASH_AM160B;
info->sector_count = 35;
- info->size = 0x00200000;
- break; /* => 2 MB */
+ info->size = 0x00200000; /* => 2 MiB */
+ break;
default:
info->flash_id = FLASH_UNKNOWN;
@@ -306,7 +306,7 @@ static ulong flash_get_size(vu_long * addr, flash_info_t * info)
info->start[i] = base + (i * 0x00010000);
} else {
if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
+ /* set sector offsets for bottom boot block type */
info->start[0] = base + 0x00000000;
info->start[1] = base + 0x00004000;
info->start[2] = base + 0x00006000;
@@ -316,7 +316,7 @@ static ulong flash_get_size(vu_long * addr, flash_info_t * info)
base + (i * 0x00010000) - 0x00030000;
}
} else {
- /* set sector offsets for top boot block type */
+ /* set sector offsets for top boot block type */
i = info->sector_count - 1;
info->start[i--] = base + info->size - 0x00004000;
info->start[i--] = base + info->size - 0x00006000;
@@ -666,7 +666,7 @@ static ulong flash_get_size_2(vu_long * addr, flash_info_t * info)
return (0); /* no or unknown flash */
}
- value = addr2[1]; /* device ID */
+ value = addr2[1]; /* device ID */
DEBUGF("\nFLASH DEVICEID: %x\n", value);
@@ -675,17 +675,17 @@ static ulong flash_get_size_2(vu_long * addr, flash_info_t * info)
case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320T:
info->flash_id += FLASH_AM320T;
info->sector_count = 71;
- info->size = 0x00400000; break; /* => 4 MB */
+ info->size = 0x00400000; break; /* => 4 MiB */
case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320B:
info->flash_id += FLASH_AM320B;
info->sector_count = 71;
- info->size = 0x00400000; break; /* => 4 MB */
+ info->size = 0x00400000; break; /* => 4 MiB */
case (CFG_FLASH_WORD_SIZE)STM_ID_29W320DT:
info->flash_id += FLASH_STMW320DT;
info->sector_count = 67;
- info->size = 0x00400000; break; /* => 4 MB */
+ info->size = 0x00400000; break; /* => 4 MiB */
case (CFG_FLASH_WORD_SIZE)MX_ID_LV320T:
info->flash_id += FLASH_MXLV320T;
@@ -743,7 +743,7 @@ static ulong flash_get_size_2(vu_long * addr, flash_info_t * info)
info->start[i] = base + i * 0x00010000;
} else {
if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
+ /* set sector offsets for bottom boot block type */
info->start[0] = base + 0x00000000;
info->start[1] = base + 0x00004000;
info->start[2] = base + 0x00006000;
@@ -753,7 +753,7 @@ static ulong flash_get_size_2(vu_long * addr, flash_info_t * info)
base + (i * 0x00010000) - 0x00030000;
}
} else {
- /* set sector offsets for top boot block type */
+ /* set sector offsets for top boot block type */
i = info->sector_count - 1;
info->start[i--] = base + info->size - 0x00004000;
info->start[i--] = base + info->size - 0x00006000;
diff --git a/board/amcc/ebony/Makefile b/board/amcc/ebony/Makefile
index 4a3927b..5f3e34e 100644
--- a/board/amcc/ebony/Makefile
+++ b/board/amcc/ebony/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2002
+# (C) Copyright 2002-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,11 +23,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/amcc/luan/Makefile b/board/amcc/luan/Makefile
index 5654f91..5f3e34e 100644
--- a/board/amcc/luan/Makefile
+++ b/board/amcc/luan/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2002
+# (C) Copyright 2002-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o
-OBJS += flash.o
+COBJS = $(BOARD).o flash.o
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
@@ -40,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/amcc/ocotea/Makefile b/board/amcc/ocotea/Makefile
index af223d2..4def7fd 100644
--- a/board/amcc/ocotea/Makefile
+++ b/board/amcc/ocotea/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2002
+# (C) Copyright 2002-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,11 +23,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/amcc/sequoia/Makefile b/board/amcc/sequoia/Makefile
new file mode 100644
index 0000000..b29c04a
--- /dev/null
+++ b/board/amcc/sequoia/Makefile
@@ -0,0 +1,52 @@
+#
+# (C) Copyright 2002-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+include $(TOPDIR)/include/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS = $(BOARD).o sdram.o
+SOBJS = init.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/amcc/sequoia/config.mk b/board/amcc/sequoia/config.mk
new file mode 100644
index 0000000..7713a72
--- /dev/null
+++ b/board/amcc/sequoia/config.mk
@@ -0,0 +1,41 @@
+#
+# (C) Copyright 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+#
+# AMCC 440EPx Reference Platform (Sequoia) board
+#
+
+sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp
+
+ifndef TEXT_BASE
+TEXT_BASE = 0xFFFA0000
+endif
+
+PLATFORM_CPPFLAGS += -DCONFIG_440=1
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
+
+ifeq ($(dbcr),1)
+PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+endif
diff --git a/board/amcc/sequoia/init.S b/board/amcc/sequoia/init.S
new file mode 100644
index 0000000..3d4ac85
--- /dev/null
+++ b/board/amcc/sequoia/init.S
@@ -0,0 +1,157 @@
+/*
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <ppc_asm.tmpl>
+#include <config.h>
+
+/* General */
+#define TLB_VALID 0x00000200
+#define _256M 0x10000000
+
+/* Supported page sizes */
+
+#define SZ_1K 0x00000000
+#define SZ_4K 0x00000010
+#define SZ_16K 0x00000020
+#define SZ_64K 0x00000030
+#define SZ_256K 0x00000040
+#define SZ_1M 0x00000050
+#define SZ_8M 0x00000060
+#define SZ_16M 0x00000070
+#define SZ_256M 0x00000090
+
+/* Storage attributes */
+#define SA_W 0x00000800 /* Write-through */
+#define SA_I 0x00000400 /* Caching inhibited */
+#define SA_M 0x00000200 /* Memory coherence */
+#define SA_G 0x00000100 /* Guarded */
+#define SA_E 0x00000080 /* Endian */
+
+/* Access control */
+#define AC_X 0x00000024 /* Execute */
+#define AC_W 0x00000012 /* Write */
+#define AC_R 0x00000009 /* Read */
+
+/* Some handy macros */
+
+#define EPN(e) ((e) & 0xfffffc00)
+#define TLB0(epn,sz) ( (EPN((epn)) | (sz) | TLB_VALID ) )
+#define TLB1(rpn,erpn) ( ((rpn)&0xfffffc00) | (erpn) )
+#define TLB2(a) ( (a)&0x00000fbf )
+
+#define tlbtab_start\
+ mflr r1 ;\
+ bl 0f ;
+
+#define tlbtab_end\
+ .long 0, 0, 0 ; \
+0: mflr r0 ; \
+ mtlr r1 ; \
+ blr ;
+
+#define tlbentry(epn,sz,rpn,erpn,attr)\
+ .long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
+
+
+/**************************************************************************
+ * TLB TABLE
+ *
+ * This table is used by the cpu boot code to setup the initial tlb
+ * entries. Rather than make broad assumptions in the cpu source tree,
+ * this table lets each board set things up however they like.
+ *
+ * Pointer to the table is returned in r1
+ *
+ *************************************************************************/
+ .section .bootpg,"ax"
+ .globl tlbtab
+
+tlbtab:
+ tlbtab_start
+
+ /*
+ * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
+ * speed up boot process. It is patched after relocation to enable SA_I
+ */
+#ifndef CONFIG_NAND_SPL
+ tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G )
+#else
+ tlbentry( CFG_NAND_BOOT_SPL_SRC, SZ_4K, CFG_NAND_BOOT_SPL_SRC, 1, AC_R|AC_W|AC_X|SA_G )
+#endif
+
+ /* TLB-entry for DDR SDRAM (Up to 2GB) */
+ tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+
+#ifdef CFG_INIT_RAM_DCACHE
+ /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
+ tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
+#endif
+
+ /* TLB-entry for PCI Memory */
+ tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 1, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 1, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 1, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I )
+
+ /* TLB-entry for EBC */
+ tlbentry( CFG_BCSR_BASE, SZ_1K, CFG_BCSR_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+
+ /* TLB-entry for NAND */
+ tlbentry( CFG_NAND_ADDR, SZ_1K, CFG_NAND_ADDR, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+
+ /* TLB-entry for Internal Registers & OCM */
+ tlbentry( 0xe0000000, SZ_16M, 0xe0000000, 0, AC_R|AC_W|AC_X|SA_I )
+
+ /*TLB-entry PCI registers*/
+ tlbentry( 0xEEC00000, SZ_1K, 0xEEC00000, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+
+ /* TLB-entry for peripherals */
+ tlbentry( 0xEF000000, SZ_16M, 0xEF000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
+
+ tlbtab_end
+
+#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+ /*
+ * For NAND booting the first TLB has to be reconfigured to full size
+ * and with caching disabled after running from RAM!
+ */
+#define TLB00 TLB0(CFG_BOOT_BASE_ADDR, SZ_256M)
+#define TLB01 TLB1(CFG_BOOT_BASE_ADDR, 1)
+#define TLB02 TLB2(AC_R|AC_W|AC_X|SA_G|SA_I)
+
+ .globl reconfig_tlb0
+reconfig_tlb0:
+ sync
+ isync
+ addi r4,r0,0x0000 /* TLB entry #0 */
+ lis r5,TLB00@h
+ ori r5,r5,TLB00@l
+ tlbwe r5,r4,0x0000 /* Save it out */
+ lis r5,TLB01@h
+ ori r5,r5,TLB01@l
+ tlbwe r5,r4,0x0001 /* Save it out */
+ lis r5,TLB02@h
+ ori r5,r5,TLB02@l
+ tlbwe r5,r4,0x0002 /* Save it out */
+ sync
+ isync
+ blr
+#endif
diff --git a/board/amcc/sequoia/sdram.c b/board/amcc/sequoia/sdram.c
new file mode 100644
index 0000000..a62648b
--- /dev/null
+++ b/board/amcc/sequoia/sdram.c
@@ -0,0 +1,83 @@
+/*
+ * (C) Copyright 2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <ppc440.h>
+
+/*************************************************************************
+ *
+ * initdram -- 440EPx's DDR controller is a DENALI Core
+ *
+ ************************************************************************/
+long int initdram (int board_type)
+{
+#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
+ volatile ulong val;
+
+ mtsdram(DDR0_02, 0x00000000);
+
+ /*
+ * Soft-reset SDRAM controller
+ */
+ mtsdr(sdr_srst, SDR0_SRST0_DMC);
+ mtsdr(sdr_srst, 0x00000000);
+
+ mtsdram(DDR0_00, 0x0000190A);
+ mtsdram(DDR0_01, 0x01000000);
+ mtsdram(DDR0_03, 0x02030602);
+ mtsdram(DDR0_04, 0x13030300);
+ mtsdram(DDR0_05, 0x0202050E);
+ mtsdram(DDR0_06, 0x0104C823);
+ mtsdram(DDR0_07, 0x000D0100);
+ mtsdram(DDR0_08, 0x02360001);
+ mtsdram(DDR0_09, 0x00011D5F);
+ mtsdram(DDR0_10, 0x00000300);
+ mtsdram(DDR0_11, 0x0027C800);
+ mtsdram(DDR0_12, 0x00000003);
+ mtsdram(DDR0_14, 0x00000000);
+ mtsdram(DDR0_17, 0x19000000);
+ mtsdram(DDR0_18, 0x19191919);
+ mtsdram(DDR0_19, 0x19191919);
+ mtsdram(DDR0_20, 0x0B0B0B0B);
+ mtsdram(DDR0_21, 0x0B0B0B0B);
+ mtsdram(DDR0_22, 0x00267F0B);
+ mtsdram(DDR0_23, 0x00000000);
+ mtsdram(DDR0_24, 0x01010002);
+ mtsdram(DDR0_26, 0x5B260181);
+ mtsdram(DDR0_27, 0x0000682B);
+ mtsdram(DDR0_28, 0x00000000);
+ mtsdram(DDR0_31, 0x00000000);
+ mtsdram(DDR0_42, 0x01000006);
+ mtsdram(DDR0_43, 0x050A0200);
+ mtsdram(DDR0_44, 0x00000005);
+ mtsdram(DDR0_02, 0x00000001);
+
+ /*
+ * Wait for DCC master delay line to finish calibration
+ */
+ mfsdram(DDR0_17, val);
+ while (((val >> 8) & 0x000007f) == 0) {
+ mfsdram(DDR0_17, val);
+ }
+#endif /* #ifndef CONFIG_NAND_U_BOOT */
+
+ return (CFG_MBYTES_SDRAM << 20);
+}
diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c
new file mode 100644
index 0000000..a8ba2c0
--- /dev/null
+++ b/board/amcc/sequoia/sequoia.c
@@ -0,0 +1,560 @@
+/*
+ * (C) Copyright 2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * (C) Copyright 2006
+ * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
+ * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <ppc440.h>
+#include "sequoia.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+int board_early_init_f(void)
+{
+ unsigned long sdr0_cust0;
+ unsigned long sdr0_pfc1, sdr0_pfc2;
+ register uint reg;
+
+ mtdcr(ebccfga, xbcfg);
+ mtdcr(ebccfgd, 0xb8400000);
+
+ /*--------------------------------------------------------------------
+ * Setup the GPIO pins
+ *-------------------------------------------------------------------*/
+ /* test-only: take GPIO init from pcs440ep ???? in config file */
+ out32(GPIO0_OR, 0x00000000);
+ out32(GPIO0_TCR, 0x0000000f);
+ out32(GPIO0_OSRL, 0x50015400);
+ out32(GPIO0_OSRH, 0x550050aa);
+ out32(GPIO0_TSRL, 0x50015400);
+ out32(GPIO0_TSRH, 0x55005000);
+ out32(GPIO0_ISR1L, 0x50000000);
+ out32(GPIO0_ISR1H, 0x00000000);
+ out32(GPIO0_ISR2L, 0x00000000);
+ out32(GPIO0_ISR2H, 0x00000100);
+ out32(GPIO0_ISR3L, 0x00000000);
+ out32(GPIO0_ISR3H, 0x00000000);
+
+ out32(GPIO1_OR, 0x00000000);
+ out32(GPIO1_TCR, 0xc2000000);
+ out32(GPIO1_OSRL, 0x5c280000);
+ out32(GPIO1_OSRH, 0x00000000);
+ out32(GPIO1_TSRL, 0x0c000000);
+ out32(GPIO1_TSRH, 0x00000000);
+ out32(GPIO1_ISR1L, 0x00005550);
+ out32(GPIO1_ISR1H, 0x00000000);
+ out32(GPIO1_ISR2L, 0x00050000);
+ out32(GPIO1_ISR2H, 0x00000000);
+ out32(GPIO1_ISR3L, 0x01400000);
+ out32(GPIO1_ISR3H, 0x00000000);
+
+ /*--------------------------------------------------------------------
+ * Setup the interrupt controller polarities, triggers, etc.
+ *-------------------------------------------------------------------*/
+ mtdcr(uic0sr, 0xffffffff); /* clear all */
+ mtdcr(uic0er, 0x00000000); /* disable all */
+ mtdcr(uic0cr, 0x00000005); /* ATI & UIC1 crit are critical */
+ mtdcr(uic0pr, 0xfffff7ff); /* per ref-board manual */
+ mtdcr(uic0tr, 0x00000000); /* per ref-board manual */
+ mtdcr(uic0vr, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(uic0sr, 0xffffffff); /* clear all */
+
+ mtdcr(uic1sr, 0xffffffff); /* clear all */
+ mtdcr(uic1er, 0x00000000); /* disable all */
+ mtdcr(uic1cr, 0x00000000); /* all non-critical */
+ mtdcr(uic1pr, 0xffffffff); /* per ref-board manual */
+ mtdcr(uic1tr, 0x00000000); /* per ref-board manual */
+ mtdcr(uic1vr, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(uic1sr, 0xffffffff); /* clear all */
+
+ mtdcr(uic2sr, 0xffffffff); /* clear all */
+ mtdcr(uic2er, 0x00000000); /* disable all */
+ mtdcr(uic2cr, 0x00000000); /* all non-critical */
+ mtdcr(uic2pr, 0xffffffff); /* per ref-board manual */
+ mtdcr(uic2tr, 0x00000000); /* per ref-board manual */
+ mtdcr(uic2vr, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(uic2sr, 0xffffffff); /* clear all */
+
+ /* 50MHz tmrclk */
+ *(unsigned char *)(CFG_BCSR_BASE | 0x04) = 0x00;
+
+ /* clear write protects */
+ *(unsigned char *)(CFG_BCSR_BASE | 0x07) = 0x00;
+
+ /* enable Ethernet */
+ *(unsigned char *)(CFG_BCSR_BASE | 0x08) = 0x00;
+
+ /* enable USB device */
+ *(unsigned char *)(CFG_BCSR_BASE | 0x09) = 0x20;
+
+ /* select Ethernet pins */
+ mfsdr(SDR0_PFC1, sdr0_pfc1);
+ sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) | SDR0_PFC1_SELECT_CONFIG_4;
+ mfsdr(SDR0_PFC2, sdr0_pfc2);
+ sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) | SDR0_PFC2_SELECT_CONFIG_4;
+ mtsdr(SDR0_PFC2, sdr0_pfc2);
+ mtsdr(SDR0_PFC1, sdr0_pfc1);
+
+ /* PCI arbiter enabled */
+ mfsdr(sdr_pci0, reg);
+ mtsdr(sdr_pci0, 0x80000000 | reg);
+
+ /* setup NAND FLASH */
+ mfsdr(SDR0_CUST0, sdr0_cust0);
+ sdr0_cust0 = SDR0_CUST0_MUX_NDFC_SEL |
+ SDR0_CUST0_NDFC_ENABLE |
+ SDR0_CUST0_NDFC_BW_8_BIT |
+ SDR0_CUST0_NDFC_ARE_MASK |
+ (0x80000000 >> (28 + CFG_NAND_CS));
+ mtsdr(SDR0_CUST0, sdr0_cust0);
+
+ return 0;
+}
+
+/*---------------------------------------------------------------------------+
+ | misc_init_r.
+ +---------------------------------------------------------------------------*/
+int misc_init_r(void)
+{
+ uint pbcr;
+ int size_val = 0;
+#ifdef CONFIG_440EPX
+ unsigned long usb2d0cr = 0;
+ unsigned long usb2phy0cr, usb2h0cr = 0;
+ unsigned long sdr0_pfc1;
+ char *act = getenv("usbact");
+#endif
+
+ /*
+ * FLASH stuff...
+ */
+
+ /* Re-do sizing to get full correct info */
+#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
+ mtdcr(ebccfga, pb3cr);
+#else
+ mtdcr(ebccfga, pb0cr);
+#endif
+ pbcr = mfdcr(ebccfgd);
+ switch (gd->bd->bi_flashsize) {
+ case 1 << 20:
+ size_val = 0;
+ break;
+ case 2 << 20:
+ size_val = 1;
+ break;
+ case 4 << 20:
+ size_val = 2;
+ break;
+ case 8 << 20:
+ size_val = 3;
+ break;
+ case 16 << 20:
+ size_val = 4;
+ break;
+ case 32 << 20:
+ size_val = 5;
+ break;
+ case 64 << 20:
+ size_val = 6;
+ break;
+ case 128 << 20:
+ size_val = 7;
+ break;
+ }
+ pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
+#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
+ mtdcr(ebccfga, pb3cr);
+#else
+ mtdcr(ebccfga, pb0cr);
+#endif
+ mtdcr(ebccfgd, pbcr);
+
+ /* adjust flash start and offset */
+ gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
+ gd->bd->bi_flashoffset = 0;
+
+#ifdef CFG_ENV_IS_IN_FLASH
+ /* Monitor protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ -CFG_MONITOR_LEN,
+ 0xffffffff,
+ &flash_info[0]);
+
+ /* Env protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ CFG_ENV_ADDR_REDUND,
+ CFG_ENV_ADDR_REDUND + 2*CFG_ENV_SECT_SIZE - 1,
+ &flash_info[0]);
+#endif
+
+ /*
+ * USB suff...
+ */
+#ifdef CONFIG_440EPX
+ if (act == NULL || strcmp(act, "hostdev") == 0) {
+ /* SDR Setting */
+ mfsdr(SDR0_PFC1, sdr0_pfc1);
+ mfsdr(SDR0_USB0, usb2d0cr);
+ mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+ mfsdr(SDR0_USB2H0CR, usb2h0cr);
+
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0*/
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ; /*1*/
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS; /*0*/
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; /*1*/
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; /*1*/
+
+ /* An 8-bit/60MHz interface is the only possible alternative
+ when connecting the Device to the PHY */
+ usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
+ usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ; /*1*/
+
+ /* To enable the USB 2.0 Device function through the UTMI interface */
+ usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
+ usb2d0cr = usb2d0cr | SDR0_USB2D0CR_USB2DEV_SELECTION; /*1*/
+
+ sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK;
+ sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_USB2D_SEL; /*0*/
+
+ mtsdr(SDR0_PFC1, sdr0_pfc1);
+ mtsdr(SDR0_USB0, usb2d0cr);
+ mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+ mtsdr(SDR0_USB2H0CR, usb2h0cr);
+
+ /*clear resets*/
+ udelay (1000);
+ mtsdr(SDR0_SRST1, 0x00000000);
+ udelay (1000);
+ mtsdr(SDR0_SRST0, 0x00000000);
+
+ printf("USB: Host(int phy) Device(ext phy)\n");
+
+ } else if (strcmp(act, "dev") == 0) {
+ /*-------------------PATCH-------------------------------*/
+ mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0*/
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS; /*0*/
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; /*1*/
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; /*1*/
+ mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+
+ udelay (1000);
+ mtsdr(SDR0_SRST1, 0x672c6000);
+
+ udelay (1000);
+ mtsdr(SDR0_SRST0, 0x00000080);
+
+ udelay (1000);
+ mtsdr(SDR0_SRST1, 0x60206000);
+
+ *(unsigned int *)(0xe0000350) = 0x00000001;
+
+ udelay (1000);
+ mtsdr(SDR0_SRST1, 0x60306000);
+ /*-------------------PATCH-------------------------------*/
+
+ /* SDR Setting */
+ mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+ mfsdr(SDR0_USB2H0CR, usb2h0cr);
+ mfsdr(SDR0_USB0, usb2d0cr);
+ mfsdr(SDR0_PFC1, sdr0_pfc1);
+
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0*/
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ; /*0*/
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PUREN; /*1*/
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_DEV; /*0*/
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_DEV; /*0*/
+
+ usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
+ usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_8BIT_60MHZ; /*0*/
+
+ usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
+ usb2d0cr = usb2d0cr | SDR0_USB2D0CR_EBC_SELECTION; /*0*/
+
+ sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK;
+ sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_EBCHR_SEL; /*1*/
+
+ mtsdr(SDR0_USB2H0CR, usb2h0cr);
+ mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+ mtsdr(SDR0_USB0, usb2d0cr);
+ mtsdr(SDR0_PFC1, sdr0_pfc1);
+
+ /*clear resets*/
+ udelay (1000);
+ mtsdr(SDR0_SRST1, 0x00000000);
+ udelay (1000);
+ mtsdr(SDR0_SRST0, 0x00000000);
+
+ printf("USB: Device(int phy)\n");
+ }
+#endif /* CONFIG_440EPX */
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ char *s = getenv("serial#");
+
+#ifdef CONFIG_440EPX
+ printf("Board: Sequoia - AMCC PPC440EPx Evaluation Board");
+#else
+ printf("Board: Rainier - AMCC PPC440GRx Evaluation Board");
+#endif
+ if (s != NULL) {
+ puts(", serial# ");
+ puts(s);
+ }
+ putc('\n');
+
+ return (0);
+}
+
+#if defined(CFG_DRAM_TEST)
+int testdram(void)
+{
+ unsigned long *mem = (unsigned long *)0;
+ const unsigned long kend = (1024 / sizeof(unsigned long));
+ unsigned long k, n;
+
+ mtmsr(0);
+
+ for (k = 0; k < CFG_MBYTES_SDRAM;
+ ++k, mem += (1024 / sizeof(unsigned long))) {
+ if ((k & 1023) == 0) {
+ printf("%3d MB\r", k / 1024);
+ }
+
+ memset(mem, 0xaaaaaaaa, 1024);
+ for (n = 0; n < kend; ++n) {
+ if (mem[n] != 0xaaaaaaaa) {
+ printf("SDRAM test fails at: %08x\n",
+ (uint) & mem[n]);
+ return 1;
+ }
+ }
+
+ memset(mem, 0x55555555, 1024);
+ for (n = 0; n < kend; ++n) {
+ if (mem[n] != 0x55555555) {
+ printf("SDRAM test fails at: %08x\n",
+ (uint) & mem[n]);
+ return 1;
+ }
+ }
+ }
+ printf("SDRAM test passes\n");
+ return 0;
+}
+#endif
+
+/*************************************************************************
+ * pci_pre_init
+ *
+ * This routine is called just prior to registering the hose and gives
+ * the board the opportunity to check things. Returning a value of zero
+ * indicates that things are bad & PCI initialization should be aborted.
+ *
+ * Different boards may wish to customize the pci controller structure
+ * (add regions, override default access routines, etc) or perform
+ * certain pre-initialization actions.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+int pci_pre_init(struct pci_controller *hose)
+{
+ unsigned long addr;
+#if 0
+ /*--------------------------------------------------------------------------+
+ * Cactus is always configured as the host & requires the
+ * PCI arbiter to be enabled ???
+ *--------------------------------------------------------------------------*/
+ unsigned long strap;
+ mfsdr(sdr_sdstp1, strap);
+ if ((strap & SDR0_SDSTP1_PAE_MASK) == 0) {
+ printf("PCI: SDR0_STRP1[PAE] not set.\n");
+ printf("PCI: Configuration aborted.\n");
+ return 0;
+ }
+#endif
+
+ /*-------------------------------------------------------------------------+
+ | Set priority for all PLB3 devices to 0.
+ | Set PLB3 arbiter to fair mode.
+ +-------------------------------------------------------------------------*/
+ mfsdr(sdr_amp1, addr);
+ mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
+ addr = mfdcr(plb3_acr);
+ mtdcr(plb3_acr, addr | 0x80000000);
+
+ /*-------------------------------------------------------------------------+
+ | Set priority for all PLB4 devices to 0.
+ +-------------------------------------------------------------------------*/
+ mfsdr(sdr_amp0, addr);
+ mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
+ addr = mfdcr(plb4_acr) | 0xa0000000; /* Was 0x8---- */
+ mtdcr(plb4_acr, addr);
+
+ /*-------------------------------------------------------------------------+
+ | Set Nebula PLB4 arbiter to fair mode.
+ +-------------------------------------------------------------------------*/
+ /* Segment0 */
+ addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
+ addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
+ addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep;
+ addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep;
+ mtdcr(plb0_acr, addr);
+
+ /* Segment1 */
+ addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair;
+ addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled;
+ addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep;
+ addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep;
+ mtdcr(plb1_acr, addr);
+
+ return 1;
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+
+/*************************************************************************
+ * pci_target_init
+ *
+ * The bootstrap configuration provides default settings for the pci
+ * inbound map (PIM). But the bootstrap config choices are limited and
+ * may not be sufficient for a given board.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+void pci_target_init(struct pci_controller *hose)
+{
+ /*--------------------------------------------------------------------------+
+ * Set up Direct MMIO registers
+ *--------------------------------------------------------------------------*/
+ /*--------------------------------------------------------------------------+
+ | PowerPC440EPX PCI Master configuration.
+ | Map one 1Gig range of PLB/processor addresses to PCI memory space.
+ | PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF
+ | Use byte reversed out routines to handle endianess.
+ | Make this region non-prefetchable.
+ +--------------------------------------------------------------------------*/
+ out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */
+ out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE); /* PMM0 Local Address */
+ out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */
+ out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */
+ out32r(PCIX0_PMM0MA, 0xE0000001); /* 512M + No prefetching, and enable region */
+
+ out32r(PCIX0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */
+ out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2); /* PMM0 Local Address */
+ out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */
+ out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */
+ out32r(PCIX0_PMM1MA, 0xE0000001); /* 512M + No prefetching, and enable region */
+
+ out32r(PCIX0_PTM1MS, 0x00000001); /* Memory Size/Attribute */
+ out32r(PCIX0_PTM1LA, 0); /* Local Addr. Reg */
+ out32r(PCIX0_PTM2MS, 0); /* Memory Size/Attribute */
+ out32r(PCIX0_PTM2LA, 0); /* Local Addr. Reg */
+
+ /*--------------------------------------------------------------------------+
+ * Set up Configuration registers
+ *--------------------------------------------------------------------------*/
+
+ /* Program the board's subsystem id/vendor id */
+ pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
+ CFG_PCI_SUBSYS_VENDORID);
+ pci_write_config_word(0, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_ID);
+
+ /* Configure command register as bus master */
+ pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
+
+ /* 240nS PCI clock */
+ pci_write_config_word(0, PCI_LATENCY_TIMER, 1);
+
+ /* No error reporting */
+ pci_write_config_word(0, PCI_ERREN, 0);
+
+ pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
+
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+
+/*************************************************************************
+ * pci_master_init
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
+void pci_master_init(struct pci_controller *hose)
+{
+ unsigned short temp_short;
+
+ /*--------------------------------------------------------------------------+
+ | Write the PowerPC440 EP PCI Configuration regs.
+ | Enable PowerPC440 EP to be a master on the PCI bus (PMM).
+ | Enable PowerPC440 EP to act as a PCI memory target (PTM).
+ +--------------------------------------------------------------------------*/
+ pci_read_config_word(0, PCI_COMMAND, &temp_short);
+ pci_write_config_word(0, PCI_COMMAND,
+ temp_short | PCI_COMMAND_MASTER |
+ PCI_COMMAND_MEMORY);
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
+
+/*************************************************************************
+ * is_pci_host
+ *
+ * This routine is called to determine if a pci scan should be
+ * performed. With various hardware environments (especially cPCI and
+ * PPMC) it's insufficient to depend on the state of the arbiter enable
+ * bit in the strap register, or generic host/adapter assumptions.
+ *
+ * Rather than hard-code a bad assumption in the general 440 code, the
+ * 440 pci code requires the board to decide at runtime.
+ *
+ * Return 0 for adapter mode, non-zero for host (monarch) mode.
+ *
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI)
+int is_pci_host(struct pci_controller *hose)
+{
+ /* Cactus is always configured as host. */
+ return (1);
+}
+#endif /* defined(CONFIG_PCI) */
diff --git a/board/amcc/sequoia/sequoia.h b/board/amcc/sequoia/sequoia.h
new file mode 100644
index 0000000..1d44b16
--- /dev/null
+++ b/board/amcc/sequoia/sequoia.h
@@ -0,0 +1,67 @@
+/*
+ * (C) Copyright 2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * (C) Copyright 2006
+ * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
+ * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+/*----------------------------------------------------------------------------+
+ | EBC Configuration Register - EBC0_CFG
+ +----------------------------------------------------------------------------*/
+/* External Bus Three-State Control */
+#define EBC0_CFG_EBTC_DRIVEN 0x80000000
+/* Device-Paced Time-out Disable */
+#define EBC0_CFG_PTD_ENABLED 0x00000000
+/* Ready Timeout Count */
+#define EBC0_CFG_RTC_MASK 0x38000000
+#define EBC0_CFG_RTC_16PERCLK 0x00000000
+#define EBC0_CFG_RTC_32PERCLK 0x08000000
+#define EBC0_CFG_RTC_64PERCLK 0x10000000
+#define EBC0_CFG_RTC_128PERCLK 0x18000000
+#define EBC0_CFG_RTC_256PERCLK 0x20000000
+#define EBC0_CFG_RTC_512PERCLK 0x28000000
+#define EBC0_CFG_RTC_1024PERCLK 0x30000000
+#define EBC0_CFG_RTC_2048PERCLK 0x38000000
+/* External Master Priority Low */
+#define EBC0_CFG_EMPL_LOW 0x00000000
+#define EBC0_CFG_EMPL_MEDIUM_LOW 0x02000000
+#define EBC0_CFG_EMPL_MEDIUM_HIGH 0x04000000
+#define EBC0_CFG_EMPL_HIGH 0x06000000
+/* External Master Priority High */
+#define EBC0_CFG_EMPH_LOW 0x00000000
+#define EBC0_CFG_EMPH_MEDIUM_LOW 0x00800000
+#define EBC0_CFG_EMPH_MEDIUM_HIGH 0x01000000
+#define EBC0_CFG_EMPH_HIGH 0x01800000
+/* Chip Select Three-State Control */
+#define EBC0_CFG_CSTC_DRIVEN 0x00400000
+/* Burst Prefetch */
+#define EBC0_CFG_BPF_ONEDW 0x00000000
+#define EBC0_CFG_BPF_TWODW 0x00100000
+#define EBC0_CFG_BPF_FOURDW 0x00200000
+/* External Master Size */
+#define EBC0_CFG_EMS_8BIT 0x00000000
+/* Power Management Enable */
+#define EBC0_CFG_PME_DISABLED 0x00000000
+#define EBC0_CFG_PME_ENABLED 0x00020000
+/* Power Management Timer */
+#define EBC0_CFG_PMT_ENCODE(n) ((((unsigned long)(n))&0x1F)<<12)
+
+#define SDR0_USB0 0x0320 /* USB Control Register */
diff --git a/board/amcc/sequoia/u-boot-nand.lds b/board/amcc/sequoia/u-boot-nand.lds
new file mode 100644
index 0000000..cf2e2b5
--- /dev/null
+++ b/board/amcc/sequoia/u-boot-nand.lds
@@ -0,0 +1,137 @@
+/*
+ * (C) Copyright 2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/ppc4xx/start.o (.text)
+
+ /* Align to next NAND block */
+ . = ALIGN(0x4000);
+ common/environment.o (.ppcenv)
+ /* Keep some space here for redundant env and potential bad env blocks */
+ . = ALIGN(0x10000);
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/amcc/sequoia/u-boot.lds b/board/amcc/sequoia/u-boot.lds
new file mode 100644
index 0000000..a423f98
--- /dev/null
+++ b/board/amcc/sequoia/u-boot.lds
@@ -0,0 +1,145 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ .resetvec 0xFFFFFFFC :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ .bootpg 0xFFFFF000 :
+ {
+ cpu/ppc4xx/start.o (.bootpg)
+ } = 0xffff
+
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/ppc4xx/start.o (.text)
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+
+ ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified.");
+
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/amcc/walnut/Makefile b/board/amcc/walnut/Makefile
index f5bda55..e78ed5f 100644
--- a/board/amcc/walnut/Makefile
+++ b/board/amcc/walnut/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,9 +23,13 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
@@ -38,9 +42,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/amcc/yellowstone/Makefile b/board/amcc/yellowstone/Makefile
index 47116d3..a47a067 100644
--- a/board/amcc/yellowstone/Makefile
+++ b/board/amcc/yellowstone/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2002
+# (C) Copyright 2002-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,11 +23,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o
+COBJS = $(BOARD).o
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/amcc/yosemite/Makefile b/board/amcc/yosemite/Makefile
index 47116d3..a47a067 100644
--- a/board/amcc/yosemite/Makefile
+++ b/board/amcc/yosemite/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2002
+# (C) Copyright 2002-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,11 +23,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o
+COBJS = $(BOARD).o
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/amcc/yucca/Makefile b/board/amcc/yucca/Makefile
index c85fa31..696fd40 100644
--- a/board/amcc/yucca/Makefile
+++ b/board/amcc/yucca/Makefile
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o cmd_yucca.o
+COBJS = $(BOARD).o flash.o cmd_yucca.o
SOBJS = init.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c
index af12839..cd17526 100644
--- a/board/amcc/yucca/yucca.c
+++ b/board/amcc/yucca/yucca.c
@@ -32,6 +32,10 @@
#include <asm-ppc/io.h>
#include "yucca.h"
+#include "../cpu/ppc4xx/440spe_pcie.h"
+
+#undef PCIE_ENDPOINT
+/* #define PCIE_ENDPOINT 1 */
void fpga_init (void);
@@ -562,10 +566,11 @@ int checkboard (void)
static long int yucca_probe_for_dimms(void)
{
- long int dimm_installed[MAXDIMMS];
- long int dimm_num, probe_result;
- long int dimms_found = 0;
- uchar dimm_addr = IIC0_DIMM0_ADDR;
+ int dimm_installed[MAXDIMMS];
+ int dimm_num, result;
+ int dimms_found = 0;
+ uchar dimm_addr = IIC0_DIMM0_ADDR;
+ uchar dimm_spd_data[MAX_SPD_BYTES];
for (dimm_num = 0; dimm_num < MAXDIMMS; dimm_num++) {
/* check if there is a chip at the dimm address */
@@ -577,12 +582,28 @@ static long int yucca_probe_for_dimms(void)
dimm_addr = IIC0_DIMM1_ADDR;
break;
}
- probe_result = i2c_probe(dimm_addr);
- if (probe_result == 0) {
+ result = i2c_probe(dimm_addr);
+
+ memset(dimm_spd_data, 0, MAX_SPD_BYTES * sizeof(char));
+ if (result == 0) {
+ /* read first byte of SPD data, if there is any data */
+ result = i2c_read(dimm_addr, 0, 1, dimm_spd_data, 1);
+
+ if (result == 0) {
+ result = dimm_spd_data[0];
+ result = result > MAX_SPD_BYTES ?
+ MAX_SPD_BYTES : result;
+ result = i2c_read(dimm_addr, 0, 1,
+ dimm_spd_data, result);
+ }
+ }
+
+ if ((result == 0) &&
+ (dimm_spd_data[64] == MICRON_SPD_JEDEC_ID)) {
dimm_installed[dimm_num] = TRUE;
dimms_found++;
- debug("DIMM slot %d: DDR2 SDRAM detected\n",dimm_num);
+ debug("DIMM slot %d: DDR2 SDRAM detected\n", dimm_num);
} else {
dimm_installed[dimm_num] = FALSE;
debug("DIMM slot %d: Not populated or cannot sucessfully probe the DIMM\n", dimm_num);
@@ -1012,6 +1033,57 @@ void yucca_setup_pcie_fpga_rootpoint(int port)
out_be16((u16 *)FPGA_REG1C, reset_off | in_be16((u16 *)FPGA_REG1C));
}
+/*
+ * For the given slot, set endpoint mode, send power to the slot,
+ * turn on the green LED and turn off the yellow LED, enable the clock
+ * .In end point mode reset bit is read only.
+ */
+void yucca_setup_pcie_fpga_endpoint(int port)
+{
+ u16 power, clock, green_led, yellow_led, reset_off, rootpoint, endpoint;
+
+ switch(port) {
+ case 0:
+ rootpoint = FPGA_REG1C_PE0_ROOTPOINT;
+ endpoint = 0;
+ power = FPGA_REG1A_PE0_PWRON;
+ green_led = FPGA_REG1A_PE0_GLED;
+ clock = FPGA_REG1A_PE0_REFCLK_ENABLE;
+ yellow_led = FPGA_REG1A_PE0_YLED;
+ reset_off = FPGA_REG1C_PE0_PERST;
+ break;
+ case 1:
+ rootpoint = 0;
+ endpoint = FPGA_REG1C_PE1_ENDPOINT;
+ power = FPGA_REG1A_PE1_PWRON;
+ green_led = FPGA_REG1A_PE1_GLED;
+ clock = FPGA_REG1A_PE1_REFCLK_ENABLE;
+ yellow_led = FPGA_REG1A_PE1_YLED;
+ reset_off = FPGA_REG1C_PE1_PERST;
+ break;
+ case 2:
+ rootpoint = 0;
+ endpoint = FPGA_REG1C_PE2_ENDPOINT;
+ power = FPGA_REG1A_PE2_PWRON;
+ green_led = FPGA_REG1A_PE2_GLED;
+ clock = FPGA_REG1A_PE2_REFCLK_ENABLE;
+ yellow_led = FPGA_REG1A_PE2_YLED;
+ reset_off = FPGA_REG1C_PE2_PERST;
+ break;
+
+ default:
+ return;
+ }
+
+ out_be16((u16 *)FPGA_REG1A,
+ ~(power | clock | green_led) &
+ (yellow_led | in_be16((u16 *)FPGA_REG1A)));
+
+ out_be16((u16 *)FPGA_REG1C,
+ ~(rootpoint | reset_off) &
+ (endpoint | in_be16((u16 *)FPGA_REG1C)));
+}
+
static struct pci_controller pcie_hose[3] = {{0},{0},{0}};
@@ -1031,9 +1103,13 @@ void pcie_setup_hoses(void)
if (!yucca_pcie_card_present(i))
continue;
+#ifdef PCIE_ENDPOINT
+ yucca_setup_pcie_fpga_endpoint(i);
+ if (ppc440spe_init_pcie_endport(i)) {
+#else
yucca_setup_pcie_fpga_rootpoint(i);
-
if (ppc440spe_init_pcie_rootport(i)) {
+#endif
printf("PCIE%d: initialization failed\n", i);
continue;
}
@@ -1053,8 +1129,19 @@ void pcie_setup_hoses(void)
hose->region_count = 1;
pci_register_hose(hose);
- ppc440spe_setup_pcie(hose, i);
+#ifdef PCIE_ENDPOINT
+ ppc440spe_setup_pcie_endpoint(hose, i);
+ /*
+ * Reson for no scanning is endpoint can not generate
+ * upstream configuration accesses.
+ */
+#else
+ ppc440spe_setup_pcie_rootpoint(hose, i);
+ /*
+ * Config access can only go down stream
+ */
hose->last_busno = pci_hose_scan(hose);
+#endif
}
}
#endif /* defined(CONFIG_PCI) */
diff --git a/board/amcc/yucca/yucca.h b/board/amcc/yucca/yucca.h
index 66f7584..4d13021 100644
--- a/board/amcc/yucca/yucca.h
+++ b/board/amcc/yucca/yucca.h
@@ -60,6 +60,9 @@ extern "C" {
#define NUM_TLB_ENTRIES 64
+/* MICRON SPD JEDEC ID Code (first byte) - SPD data byte [64] */
+#define MICRON_SPD_JEDEC_ID 0x2c
+
/*----------------------------------------------------------------------------+
| TLB specific defines.
+----------------------------------------------------------------------------*/
diff --git a/board/amirix/ap1000/Makefile b/board/amirix/ap1000/Makefile
index 4e1ef21..08a17f9 100644
--- a/board/amirix/ap1000/Makefile
+++ b/board/amirix/ap1000/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,11 +23,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o serial.o pci.o powerspan.o
+COBJS = $(BOARD).o flash.o serial.o pci.o powerspan.o
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $^
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/armadillo/Makefile b/board/armadillo/Makefile
index 52ea7f2..80e1687 100644
--- a/board/armadillo/Makefile
+++ b/board/armadillo/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2002
# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
# Marius Groeger <mgroeger@sysgo.de>
@@ -24,12 +27,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := armadillo.o flash.o
+COBJS := armadillo.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
clean:
@@ -40,9 +47,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/assabet/Makefile b/board/assabet/Makefile
index c49f1b4..a7414e8 100644
--- a/board/assabet/Makefile
+++ b/board/assabet/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# 2004 (c) MontaVista Software, Inc.
@@ -25,12 +25,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := assabet.o
+COBJS := assabet.o
SOBJS := setup.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
clean:
@@ -41,9 +45,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/at91rm9200dk/Makefile b/board/at91rm9200dk/Makefile
index ec77da9..f087a0f 100644
--- a/board/at91rm9200dk/Makefile
+++ b/board/at91rm9200dk/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2003
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,11 +23,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := at91rm9200dk.o at45.o flash.o
+COBJS := at91rm9200dk.o at45.o flash.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
clean:
@@ -38,9 +42,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/atc/Makefile b/board/atc/Makefile
index 7573a0c..a041c99 100644
--- a/board/atc/Makefile
+++ b/board/atc/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o ti113x.o
+COBJS = $(BOARD).o flash.o ti113x.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/barco/Makefile b/board/barco/Makefile
index d6bbf2f..9ac6a4d 100644
--- a/board/barco/Makefile
+++ b/board/barco/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/bc3450/Makefile b/board/bc3450/Makefile
index 4dec44f..122a22a 100644
--- a/board/bc3450/Makefile
+++ b/board/bc3450/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2003-2004
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,11 +23,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o cmd_bc3450.o
+COBJS := $(BOARD).o cmd_bc3450.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -38,9 +42,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/bmw/Makefile b/board/bmw/Makefile
index 621640b..b775da2 100644
--- a/board/bmw/Makefile
+++ b/board/bmw/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2002
# James F. Dougherty, Broadcom Corporation, jfd@broadcom.com
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -24,20 +27,24 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o ns16550.o serial.o m48t59y.o
+COBJS = $(BOARD).o flash.o ns16550.o serial.o m48t59y.o
SOBJS = early_init.o
-$(LIB): .depend $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/c2mon/Makefile b/board/c2mon/Makefile
index 7b2b545..62db2f4 100644
--- a/board/c2mon/Makefile
+++ b/board/c2mon/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o pcmcia.o
+COBJS = $(BOARD).o flash.o pcmcia.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/canmb/Makefile b/board/canmb/Makefile
index 607833f..47a3e8c 100644
--- a/board/canmb/Makefile
+++ b/board/canmb/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2005
+# (C) Copyright 2005-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,13 +22,20 @@
#
include $(TOPDIR)/config.mk
+#ifneq ($(OBJTREE),$(SRCTREE))
+#$(shell mkdir -p $(obj)../common)
+#endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o
+COBJS := $(BOARD).o
#../common/flash.o ../common/vpd.o ../common/am79c874.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -39,9 +46,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/cds/mpc8541cds/Makefile b/board/cds/mpc8541cds/Makefile
index 0d4abbd..3f3a517 100644
--- a/board/cds/mpc8541cds/Makefile
+++ b/board/cds/mpc8541cds/Makefile
@@ -1,6 +1,6 @@
#
# Copyright 2004 Freescale Semiconductor.
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,16 +23,23 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o \
+COBJS := $(BOARD).o \
../common/cadmus.o \
../common/eeprom.o
SOBJS := init.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -43,9 +50,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/cds/mpc8548cds/Makefile b/board/cds/mpc8548cds/Makefile
index 0d4abbd..3f3a517 100644
--- a/board/cds/mpc8548cds/Makefile
+++ b/board/cds/mpc8548cds/Makefile
@@ -1,6 +1,6 @@
#
# Copyright 2004 Freescale Semiconductor.
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,16 +23,23 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o \
+COBJS := $(BOARD).o \
../common/cadmus.o \
../common/eeprom.o
SOBJS := init.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -43,9 +50,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/cds/mpc8555cds/Makefile b/board/cds/mpc8555cds/Makefile
index 0d4abbd..3f3a517 100644
--- a/board/cds/mpc8555cds/Makefile
+++ b/board/cds/mpc8555cds/Makefile
@@ -1,6 +1,6 @@
#
# Copyright 2004 Freescale Semiconductor.
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,16 +23,23 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o \
+COBJS := $(BOARD).o \
../common/cadmus.o \
../common/eeprom.o
SOBJS := init.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -43,9 +50,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/cerf250/Makefile b/board/cerf250/Makefile
index 83e3ba4..52712be 100644
--- a/board/cerf250/Makefile
+++ b/board/cerf250/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := cerf250.o flash.o
+COBJS := cerf250.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
clean:
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/cm4008/Makefile b/board/cm4008/Makefile
index c66dd71..fb18ad8 100644
--- a/board/cm4008/Makefile
+++ b/board/cm4008/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := cm4008.o flash.o
+COBJS := cm4008.o flash.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +42,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/cm41xx/Makefile b/board/cm41xx/Makefile
index f0d3451..d42e2a8 100644
--- a/board/cm41xx/Makefile
+++ b/board/cm41xx/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := cm41xx.o flash.o
+COBJS := cm41xx.o flash.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +42,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/cmc_pu2/Makefile b/board/cmc_pu2/Makefile
index d0def05..ccbf308 100644
--- a/board/cmc_pu2/Makefile
+++ b/board/cmc_pu2/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2003
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,11 +23,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := cmc_pu2.o at45.o flash.o load_sernum_ethaddr.o
+COBJS := cmc_pu2.o at45.o flash.o load_sernum_ethaddr.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
clean:
@@ -38,9 +42,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/cmi/Makefile b/board/cmi/Makefile
index 2324d87..d935044 100644
--- a/board/cmi/Makefile
+++ b/board/cmi/Makefile
@@ -1,6 +1,6 @@
#
-# (C) Copyright 2001 Wolfgang Denk, DENX Software Engineering, wd@denx.de
-#
+# (C) Copyright 2001-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de
#
# See file CREDITS for list of people who contributed to this
# project.
@@ -23,12 +23,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := flash.o cmi.o
-OBJS := flash.o cmi.o
-SOBJS :=
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -39,9 +42,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/cobra5272/Makefile b/board/cobra5272/Makefile
index e5d8446..e3d24b3 100644
--- a/board/cobra5272/Makefile
+++ b/board/cobra5272/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2003
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/cogent/Makefile b/board/cogent/Makefile
index 4084c7e..8498ace 100644
--- a/board/cogent/Makefile
+++ b/board/cogent/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := mb.o flash.o dipsw.o lcd.o serial.o # pci.o rtc.o par.o kbm.o
-SOBJS :=
+COBJS := mb.o flash.o dipsw.o lcd.o serial.o # pci.o rtc.o par.o kbm.o
-$(LIB): $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -39,9 +42,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/cpc45/Makefile b/board/cpc45/Makefile
index ccb811b..346833a 100644
--- a/board/cpc45/Makefile
+++ b/board/cpc45/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001-2003
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o plx9030.o pd67290.o
+COBJS = $(BOARD).o flash.o plx9030.o pd67290.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/cpu86/Makefile b/board/cpu86/Makefile
index 7a2014d..1b57d2b 100644
--- a/board/cpu86/Makefile
+++ b/board/cpu86/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/cpu87/Makefile b/board/cpu87/Makefile
index 26f53ed..1b57d2b 100644
--- a/board/cpu87/Makefile
+++ b/board/cpu87/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001-2005
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/cpu87/cpu87.c b/board/cpu87/cpu87.c
index e8c2614..9fecdd0 100644
--- a/board/cpu87/cpu87.c
+++ b/board/cpu87/cpu87.c
@@ -294,15 +294,15 @@ long int initdram (int board_type)
*/
size8 = try_init (memctl, CFG_PSDMR_8COL, CFG_OR2_8COL,
(uchar *) CFG_SDRAM_BASE);
-
+
size9 = try_init (memctl, CFG_PSDMR_9COL, CFG_OR2_9COL,
(uchar *) CFG_SDRAM_BASE);
-
+
size10 = try_init (memctl, CFG_PSDMR_10COL, CFG_OR2_10COL,
(uchar *) CFG_SDRAM_BASE);
-
+
psize = max(size8,max(size9,size10));
-
+
if (psize == size8) {
psize = try_init (memctl, CFG_PSDMR_8COL, CFG_OR2_8COL,
(uchar *) CFG_SDRAM_BASE);
diff --git a/board/cradle/Makefile b/board/cradle/Makefile
index 265d500..c6a5a0d 100644
--- a/board/cradle/Makefile
+++ b/board/cradle/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := cradle.o flash.o
+COBJS := cradle.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
clean:
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/cray/L1/Makefile b/board/cray/L1/Makefile
index bfe0922..44ef9c2 100644
--- a/board/cray/L1/Makefile
+++ b/board/cray/L1/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,35 +23,41 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
SOBJS = init.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
# HACK: depend needs bootscript.c, which needs tools/mkimage, which is not
# built in the depend stage. So... put bootscript.o here, not in OBJS
-$(LIB): $(OBJS) $(SOBJS) bootscript.o
+$(LIB): $(OBJS) $(SOBJS) $(obj)bootscript.o
$(AR) crv $@ $^
clean:
- rm -f $(SOBJS) $(OBJS) bootscript.c bootscript.image bootscript.o
+ rm -f $(SOBJS) $(OBJS) $(obj)bootscript.c \
+ $(obj)bootscript.image $(obj)bootscript.o
distclean: clean
rm -f $(LIB) core *.bak .depend
-$(BOARD).o : $(BOARD).c bootscript.o
+$(obj)$(BOARD).o : $(src)$(BOARD).c $(obj)bootscript.o
-bootscript.c: bootscript.image
+$(obj)bootscript.c: $(obj)bootscript.image
od -t x1 -v -A x $^ | awk -f x2c.awk > $@
-bootscript.image: bootscript.hush Makefile
- -$(TOPDIR)/tools/mkimage -A ppc -O linux -T script -C none -a 0 -e 0 -n bootscript -d bootscript.hush $@
+$(obj)bootscript.image: $(src)bootscript.hush $(src)Makefile
+ -$(OBJTREE)/tools/mkimage -A ppc -O linux -T script -C none -a 0 -e 0 -n bootscript -d $(src)bootscript.hush $@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/csb226/Makefile b/board/csb226/Makefile
index 5b311a9..34c071e 100644
--- a/board/csb226/Makefile
+++ b/board/csb226/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := csb226.o flash.o
+COBJS := csb226.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
clean:
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/csb272/Makefile b/board/csb272/Makefile
index 926e065..7acb7c8 100644
--- a/board/csb272/Makefile
+++ b/board/csb272/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,14 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-#OBJS = $(BOARD).o flash.o
-#OBJS = $(BOARD).o strataflash.o
-OBJS = $(BOARD).o
+#COBJS = $(BOARD).o flash.o
+#COBJS = $(BOARD).o strataflash.o
+COBJS = $(BOARD).o
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $^
@@ -43,9 +46,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/csb472/Makefile b/board/csb472/Makefile
index 926e065..7acb7c8 100644
--- a/board/csb472/Makefile
+++ b/board/csb472/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,14 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-#OBJS = $(BOARD).o flash.o
-#OBJS = $(BOARD).o strataflash.o
-OBJS = $(BOARD).o
+#COBJS = $(BOARD).o flash.o
+#COBJS = $(BOARD).o strataflash.o
+COBJS = $(BOARD).o
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $^
@@ -43,9 +46,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/csb637/Makefile b/board/csb637/Makefile
index 61d5a35..d766ea2 100644
--- a/board/csb637/Makefile
+++ b/board/csb637/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2003
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,11 +23,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := csb637.o
+COBJS := csb637.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
clean:
@@ -38,9 +42,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/cu824/Makefile b/board/cu824/Makefile
index 7a2014d..1b57d2b 100644
--- a/board/cu824/Makefile
+++ b/board/cu824/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/dave/B2/Makefile b/board/dave/B2/Makefile
index 548fd52..106025d 100644
--- a/board/dave/B2/Makefile
+++ b/board/dave/B2/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2002
# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
# Marius Groeger <mgroeger@sysgo.de>
@@ -24,12 +27,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := B2.o flash.o
+COBJS := B2.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
clean:
@@ -40,9 +47,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/dave/PPChameleonEVB/Makefile b/board/dave/PPChameleonEVB/Makefile
index 581a580..e62981c 100644
--- a/board/dave/PPChameleonEVB/Makefile
+++ b/board/dave/PPChameleonEVB/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,9 +23,13 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o nand.o
+COBJS = $(BOARD).o flash.o nand.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $^
@@ -38,9 +42,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/dbau1x00/Makefile b/board/dbau1x00/Makefile
index d9b0e2d..13986b8 100644
--- a/board/dbau1x00/Makefile
+++ b/board/dbau1x00/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2003
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,19 +23,23 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
SOBJS = lowlevel_init.o
-$(LIB): .depend $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/delta/Makefile b/board/delta/Makefile
index e744eec..514ca9b 100644
--- a/board/delta/Makefile
+++ b/board/delta/Makefile
@@ -1,6 +1,6 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -24,12 +24,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := delta.o nand.o
+COBJS := delta.o nand.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
clean:
@@ -40,9 +44,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/dnp1110/Makefile b/board/dnp1110/Makefile
index eaa38bc..367d8ae 100644
--- a/board/dnp1110/Makefile
+++ b/board/dnp1110/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := dnp1110.o flash.o
+COBJS := dnp1110.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
clean:
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/eXalion/Makefile b/board/eXalion/Makefile
index cfbf465..0acb052 100644
--- a/board/eXalion/Makefile
+++ b/board/eXalion/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,19 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o
-SOBJS =
+COBJS = $(BOARD).o
-$(LIB): .depend $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/eltec/bab7xx/Makefile b/board/eltec/bab7xx/Makefile
index 7d8ed26..5c6b654 100644
--- a/board/eltec/bab7xx/Makefile
+++ b/board/eltec/bab7xx/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o pci.o misc.o el_srom.o dc_srom.o l2cache.o
+COBJS = $(BOARD).o flash.o pci.o misc.o el_srom.o dc_srom.o l2cache.o
SOBJS = asm_init.o
-$(LIB): .depend $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
clean:
@@ -40,9 +44,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/eltec/elppc/Makefile b/board/eltec/elppc/Makefile
index 76b2cfe..5d186d9 100644
--- a/board/eltec/elppc/Makefile
+++ b/board/eltec/elppc/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,14 +23,18 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o pci.o misc.o mpc107_i2c.o eepro100_srom.o
+COBJS = $(BOARD).o flash.o pci.o misc.o mpc107_i2c.o eepro100_srom.o
SOBJS = asm_init.o
-$(LIB): .depend $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -40,9 +44,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/eltec/mhpc/Makefile b/board/eltec/mhpc/Makefile
index 13ce9fc..e3d24b3 100644
--- a/board/eltec/mhpc/Makefile
+++ b/board/eltec/mhpc/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/emk/top5200/Makefile b/board/emk/top5200/Makefile
index 986608b..307ef4a 100644
--- a/board/emk/top5200/Makefile
+++ b/board/emk/top5200/Makefile
@@ -1,6 +1,6 @@
#
-# (C) Copyright 2003
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,19 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o ../common/flash.o ../common/vpd.o ../common/am79c874.o
+COBJS := $(BOARD).o ../common/flash.o ../common/vpd.o ../common/am79c874.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -39,9 +46,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/emk/top860/Makefile b/board/emk/top860/Makefile
index a74dd2f..bd923af 100644
--- a/board/emk/top860/Makefile
+++ b/board/emk/top860/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,19 +22,26 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o ../common/flash.o ../common/vpd.o ../common/am79c874.o
+COBJS = $(BOARD).o ../common/flash.o ../common/vpd.o ../common/am79c874.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/ep7312/Makefile b/board/ep7312/Makefile
index c53a3c7..c8c834f 100644
--- a/board/ep7312/Makefile
+++ b/board/ep7312/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2002
# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
# Marius Groeger <mgroeger@sysgo.de>
@@ -24,12 +27,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := ep7312.o flash.o
+COBJS := ep7312.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
clean:
@@ -40,9 +47,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/ep8248/Makefile b/board/ep8248/Makefile
index 8b10993..e880f87 100644
--- a/board/ep8248/Makefile
+++ b/board/ep8248/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,11 +23,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o
+COBJS := $(BOARD).o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -38,9 +42,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/ep8260/Makefile b/board/ep8260/Makefile
index 477e5ee..8744359 100644
--- a/board/ep8260/Makefile
+++ b/board/ep8260/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2002
+# (C) Copyright 2002-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,11 +23,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o mii_phy.o
+COBJS = $(BOARD).o flash.o mii_phy.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -38,9 +42,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/ep88x/Makefile b/board/ep88x/Makefile
index 9123a80..d0223b5 100644
--- a/board/ep88x/Makefile
+++ b/board/ep88x/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# Copyright (C) 2004 Arabella Software Ltd.
# Yuli Barcohen <yuli@arabellasw.com>
#
@@ -23,11 +26,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := $(BOARD).o
-OBJS := $(BOARD).o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(OBJS) $(SOBJS)
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -38,9 +45,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/eric/Makefile b/board/eric/Makefile
index f55e7e2..fff25ab 100644
--- a/board/eric/Makefile
+++ b/board/eric/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,11 +23,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/adciop/Makefile b/board/esd/adciop/Makefile
index 67cf29b..699a848 100644
--- a/board/esd/adciop/Makefile
+++ b/board/esd/adciop/Makefile
@@ -1,6 +1,6 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,10 +23,17 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o ../common/misc.o ../common/pci.o
+COBJS = $(BOARD).o flash.o ../common/misc.o ../common/pci.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS)
$(AR) crv $@ $(OBJS)
@@ -39,9 +46,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/apc405/Makefile b/board/esd/apc405/Makefile
index 8529ec7..a5060d2 100644
--- a/board/esd/apc405/Makefile
+++ b/board/esd/apc405/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,10 +22,17 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o strataflash.o ../common/misc.o
+COBJS = $(BOARD).o strataflash.o ../common/misc.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $^
@@ -38,9 +45,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/ar405/Makefile b/board/esd/ar405/Makefile
index a60495a..dec52af 100644
--- a/board/esd/ar405/Makefile
+++ b/board/esd/ar405/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,10 +22,17 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o ../common/misc.o
+COBJS = $(BOARD).o flash.o ../common/misc.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
@@ -38,9 +45,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/ash405/Makefile b/board/esd/ash405/Makefile
index a60495a..dec52af 100644
--- a/board/esd/ash405/Makefile
+++ b/board/esd/ash405/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,10 +22,17 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o ../common/misc.o
+COBJS = $(BOARD).o flash.o ../common/misc.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
@@ -38,9 +45,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/canbt/Makefile b/board/esd/canbt/Makefile
index a60495a..dec52af 100644
--- a/board/esd/canbt/Makefile
+++ b/board/esd/canbt/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,10 +22,17 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o ../common/misc.o
+COBJS = $(BOARD).o flash.o ../common/misc.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
@@ -38,9 +45,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/cms700/Makefile b/board/esd/cms700/Makefile
index a11ee82..ab9d832 100644
--- a/board/esd/cms700/Makefile
+++ b/board/esd/cms700/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,15 +22,22 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common/xilinx_jtag)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
# Objects for Xilinx JTAG programming (CPLD)
CPLD = ../common/xilinx_jtag/lenval.o \
../common/xilinx_jtag/micro.o \
../common/xilinx_jtag/ports.o
-OBJS = $(BOARD).o flash.o ../common/misc.o $(CPLD)
+COBJS = $(BOARD).o flash.o ../common/misc.o $(CPLD)
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
@@ -43,9 +50,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/cpci2dp/Makefile b/board/esd/cpci2dp/Makefile
index 88b0ae3..72c2562 100644
--- a/board/esd/cpci2dp/Makefile
+++ b/board/esd/cpci2dp/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,10 +22,17 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o ../common/misc.o ../common/cmd_loadpci.o
+COBJS = $(BOARD).o flash.o ../common/misc.o ../common/cmd_loadpci.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
@@ -38,9 +45,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/cpci405/Makefile b/board/esd/cpci405/Makefile
index 9340a32..8f254dd 100644
--- a/board/esd/cpci405/Makefile
+++ b/board/esd/cpci405/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,10 +22,17 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o ../common/misc.o ../common/auto_update.o
+COBJS = $(BOARD).o flash.o ../common/misc.o ../common/auto_update.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
@@ -38,9 +45,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/cpci440/Makefile b/board/esd/cpci440/Makefile
index 84d44fb..b4c74fc 100644
--- a/board/esd/cpci440/Makefile
+++ b/board/esd/cpci440/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2002
+# (C) Copyright 2002-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,12 +22,19 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o strataflash.o ../common/misc.o
+COBJS = $(BOARD).o strataflash.o ../common/misc.o
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
@@ -39,9 +46,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/cpci5200/Makefile b/board/esd/cpci5200/Makefile
index 2ca73a9..78ffa0f 100644
--- a/board/esd/cpci5200/Makefile
+++ b/board/esd/cpci5200/Makefile
@@ -1,6 +1,5 @@
-
#
-# (C) Copyright 2003
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +22,25 @@
#
include $(TOPDIR)/config.mk
+# ifneq ($(OBJTREE),$(SRCTREE))
+# $(shell mkdir -p $(obj)../common/xilinx_jtag)
+# endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
# Objects for Xilinx JTAG programming (CPLD)
# CPLD = ../common/xilinx_jtag/lenval.o \
# ../common/xilinx_jtag/micro.o \
# ../common/xilinx_jtag/ports.o
-# OBJS = $(BOARD).o flash.o $(CPLD)
-OBJS = $(BOARD).o strataflash.o
+# COBJS = $(BOARD).o flash.o $(CPLD)
+COBJS = $(BOARD).o strataflash.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(OBJS) $(SOBJS)
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -45,9 +51,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/cpci5200/config.mk b/board/esd/cpci5200/config.mk
index 07b5de1..170779d 100644
--- a/board/esd/cpci5200/config.mk
+++ b/board/esd/cpci5200/config.mk
@@ -32,7 +32,7 @@
# 0x00100000 boot from RAM (for testing only)
#
-sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
ifndef TEXT_BASE
## Standard: boot high
diff --git a/board/esd/cpci750/Makefile b/board/esd/cpci750/Makefile
index cd38b2d..0dfec60 100644
--- a/board/esd/cpci750/Makefile
+++ b/board/esd/cpci750/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2001
# Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
#
@@ -22,23 +25,30 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../../Marvell/common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
SOBJS = misc.o
-OBJS = $(BOARD).o serial.o ../../Marvell/common/memory.o pci.o \
+COBJS = $(BOARD).o serial.o ../../Marvell/common/memory.o pci.o \
mv_eth.o mpsc.o i2c.o \
sdram_init.o ide.o
-$(LIB): .depend $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/cpciiser4/Makefile b/board/esd/cpciiser4/Makefile
index a60495a..dec52af 100644
--- a/board/esd/cpciiser4/Makefile
+++ b/board/esd/cpciiser4/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,10 +22,17 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o ../common/misc.o
+COBJS = $(BOARD).o flash.o ../common/misc.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
@@ -38,9 +45,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/dasa_sim/Makefile b/board/esd/dasa_sim/Makefile
index e3b1c87..c74d1ab 100644
--- a/board/esd/dasa_sim/Makefile
+++ b/board/esd/dasa_sim/Makefile
@@ -1,6 +1,6 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,10 +23,17 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o cmd_dasa_sim.o eeprom.o ../common/pci.o
+COBJS = $(BOARD).o flash.o cmd_dasa_sim.o eeprom.o ../common/pci.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS)
$(AR) crv $@ $(OBJS)
@@ -39,9 +46,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/dp405/Makefile b/board/esd/dp405/Makefile
index a11ee82..ab9d832 100644
--- a/board/esd/dp405/Makefile
+++ b/board/esd/dp405/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,15 +22,22 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common/xilinx_jtag)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
# Objects for Xilinx JTAG programming (CPLD)
CPLD = ../common/xilinx_jtag/lenval.o \
../common/xilinx_jtag/micro.o \
../common/xilinx_jtag/ports.o
-OBJS = $(BOARD).o flash.o ../common/misc.o $(CPLD)
+COBJS = $(BOARD).o flash.o ../common/misc.o $(CPLD)
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
@@ -43,9 +50,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/du405/Makefile b/board/esd/du405/Makefile
index 5ec4a4f..dec52af 100644
--- a/board/esd/du405/Makefile
+++ b/board/esd/du405/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,10 +22,17 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o ../common/misc.o
+COBJS = $(BOARD).o flash.o ../common/misc.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
@@ -38,9 +45,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/hh405/Makefile b/board/esd/hh405/Makefile
index 9340a32..8f254dd 100644
--- a/board/esd/hh405/Makefile
+++ b/board/esd/hh405/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,10 +22,17 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o ../common/misc.o ../common/auto_update.o
+COBJS = $(BOARD).o flash.o ../common/misc.o ../common/auto_update.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
@@ -38,9 +45,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/hub405/Makefile b/board/esd/hub405/Makefile
index a60495a..dec52af 100644
--- a/board/esd/hub405/Makefile
+++ b/board/esd/hub405/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,10 +22,17 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o ../common/misc.o
+COBJS = $(BOARD).o flash.o ../common/misc.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
@@ -38,9 +45,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/ocrtc/Makefile b/board/esd/ocrtc/Makefile
index b3039c6..1da3f7e 100644
--- a/board/esd/ocrtc/Makefile
+++ b/board/esd/ocrtc/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,10 +22,17 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o ../common/misc.o cmd_ocrtc.o
+COBJS = $(BOARD).o flash.o ../common/misc.o cmd_ocrtc.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
@@ -38,9 +45,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/pci405/Makefile b/board/esd/pci405/Makefile
index 6db564f..9ae728d 100644
--- a/board/esd/pci405/Makefile
+++ b/board/esd/pci405/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,12 +22,19 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o ../common/misc.o cmd_pci405.o
+COBJS = $(BOARD).o flash.o ../common/misc.o cmd_pci405.o
SOBJS = writeibm.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
$(LIB): $(OBJS) $(SOBJS)
# $(AR) crv $@ $(OBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
@@ -40,9 +47,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/pf5200/Makefile b/board/esd/pf5200/Makefile
index 603bbe2..82358af 100644
--- a/board/esd/pf5200/Makefile
+++ b/board/esd/pf5200/Makefile
@@ -1,6 +1,6 @@
#
-# (C) Copyright 2003
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,25 @@
#
include $(TOPDIR)/config.mk
+# ifneq ($(OBJTREE),$(SRCTREE))
+# $(shell mkdir -p $(obj)../common/xilinx_jtag)
+# endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
# Objects for Xilinx JTAG programming (CPLD)
# CPLD = ../common/xilinx_jtag/lenval.o \
# ../common/xilinx_jtag/micro.o \
# ../common/xilinx_jtag/ports.o
-# OBJS = $(BOARD).o flash.o $(CPLD)
-OBJS = $(BOARD).o flash.o
+# COBJS = $(BOARD).o flash.o $(CPLD)
+COBJS = $(BOARD).o flash.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -45,9 +52,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/pf5200/config.mk b/board/esd/pf5200/config.mk
index 07b5de1..170779d 100644
--- a/board/esd/pf5200/config.mk
+++ b/board/esd/pf5200/config.mk
@@ -32,7 +32,7 @@
# 0x00100000 boot from RAM (for testing only)
#
-sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
ifndef TEXT_BASE
## Standard: boot high
diff --git a/board/esd/plu405/Makefile b/board/esd/plu405/Makefile
index 9340a32..8f254dd 100644
--- a/board/esd/plu405/Makefile
+++ b/board/esd/plu405/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,10 +22,17 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o ../common/misc.o ../common/auto_update.o
+COBJS = $(BOARD).o flash.o ../common/misc.o ../common/auto_update.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
@@ -38,9 +45,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/pmc405/Makefile b/board/esd/pmc405/Makefile
index 741e4aa..2775b8a 100644
--- a/board/esd/pmc405/Makefile
+++ b/board/esd/pmc405/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,15 +22,22 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common/xilinx_jtag)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
# Objects for Xilinx JTAG programming (CPLD)
CPLD = ../common/xilinx_jtag/lenval.o \
../common/xilinx_jtag/micro.o \
../common/xilinx_jtag/ports.o
-OBJS = $(BOARD).o ../common/misc.o ../common/cmd_loadpci.o $(CPLD)
+COBJS = $(BOARD).o ../common/misc.o ../common/cmd_loadpci.o $(CPLD)
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
@@ -43,9 +50,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/tasreg/Makefile b/board/esd/tasreg/Makefile
index e5d8446..e3d24b3 100644
--- a/board/esd/tasreg/Makefile
+++ b/board/esd/tasreg/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2003
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/voh405/Makefile b/board/esd/voh405/Makefile
index a60495a..dec52af 100644
--- a/board/esd/voh405/Makefile
+++ b/board/esd/voh405/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,10 +22,17 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o ../common/misc.o
+COBJS = $(BOARD).o flash.o ../common/misc.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
@@ -38,9 +45,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/vom405/Makefile b/board/esd/vom405/Makefile
index a11ee82..ab9d832 100644
--- a/board/esd/vom405/Makefile
+++ b/board/esd/vom405/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,15 +22,22 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common/xilinx_jtag)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
# Objects for Xilinx JTAG programming (CPLD)
CPLD = ../common/xilinx_jtag/lenval.o \
../common/xilinx_jtag/micro.o \
../common/xilinx_jtag/ports.o
-OBJS = $(BOARD).o flash.o ../common/misc.o $(CPLD)
+COBJS = $(BOARD).o flash.o ../common/misc.o $(CPLD)
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
@@ -43,9 +50,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esd/wuh405/Makefile b/board/esd/wuh405/Makefile
index a60495a..dec52af 100644
--- a/board/esd/wuh405/Makefile
+++ b/board/esd/wuh405/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,10 +22,17 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o ../common/misc.o
+COBJS = $(BOARD).o flash.o ../common/misc.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
@@ -38,9 +45,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/esteem192e/Makefile b/board/esteem192e/Makefile
index 13ce9fc..e3d24b3 100644
--- a/board/esteem192e/Makefile
+++ b/board/esteem192e/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/etin/debris/Makefile b/board/etin/debris/Makefile
index 305a1bf..17ef23d 100644
--- a/board/etin/debris/Makefile
+++ b/board/etin/debris/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o phantom.o
+COBJS = $(BOARD).o flash.o phantom.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/etin/kvme080/Makefile b/board/etin/kvme080/Makefile
index 303ccfa..04ecf46 100644
--- a/board/etin/kvme080/Makefile
+++ b/board/etin/kvme080/Makefile
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o multiverse.o
+COBJS = $(BOARD).o multiverse.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/etx094/Makefile b/board/etx094/Makefile
index 13ce9fc..e3d24b3 100644
--- a/board/etx094/Makefile
+++ b/board/etx094/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/evb4510/Makefile b/board/evb4510/Makefile
index 10850a9..c634f72 100644
--- a/board/evb4510/Makefile
+++ b/board/evb4510/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := evb4510.o flash.o
+COBJS := evb4510.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/evb64260/Makefile b/board/evb64260/Makefile
index c493d6c..b28372d 100644
--- a/board/evb64260/Makefile
+++ b/board/evb64260/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2001
# Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
#
@@ -23,22 +26,25 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
SOBJS = misc.o
-OBJS = $(BOARD).o flash.o serial.o memory.o pci.o \
+COBJS = $(BOARD).o flash.o serial.o memory.o pci.o \
eth.o eth_addrtbl.o mpsc.o i2c.o \
sdram_init.o zuma_pbb.o intel_flash.o zuma_pbb_mbox.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): .depend $(OBJS) $(SOBJS)
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/exbitgen/Makefile b/board/exbitgen/Makefile
index 34bd4b2..7a39592 100644
--- a/board/exbitgen/Makefile
+++ b/board/exbitgen/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $^
@@ -41,9 +44,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/ezkit533/Makefile b/board/ezkit533/Makefile
index c9b3c92..70feb4a 100644
--- a/board/ezkit533/Makefile
+++ b/board/ezkit533/Makefile
@@ -3,7 +3,7 @@
#
# Copyright (c) 2005 blackfin.uclinux.org
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -27,18 +27,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o ezkit533.o
+COBJS = $(BOARD).o flash.o ezkit533.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/fads/Makefile b/board/fads/Makefile
index 7fc88ee..c0c1722 100644
--- a/board/fads/Makefile
+++ b/board/fads/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o lamp.o pcmcia.o
+COBJS = $(BOARD).o flash.o lamp.o pcmcia.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/flagadm/Makefile b/board/flagadm/Makefile
index 7a2014d..1b57d2b 100644
--- a/board/flagadm/Makefile
+++ b/board/flagadm/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/funkwerk/vovpn-gw/Makefile b/board/funkwerk/vovpn-gw/Makefile
index f77cc60..b2d1e35 100644
--- a/board/funkwerk/vovpn-gw/Makefile
+++ b/board/funkwerk/vovpn-gw/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,11 +23,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o flash.o m88e6060.o
+COBJS := $(BOARD).o flash.o m88e6060.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -38,9 +42,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/g2000/Makefile b/board/g2000/Makefile
index 5471d13..9b9f033 100644
--- a/board/g2000/Makefile
+++ b/board/g2000/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,9 +23,13 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o strataflash.o
+COBJS = $(BOARD).o strataflash.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
@@ -38,9 +42,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/gcplus/Makefile b/board/gcplus/Makefile
index 1954d66..695cd93 100644
--- a/board/gcplus/Makefile
+++ b/board/gcplus/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# 2003 (c) MontaVista Software, Inc.
@@ -25,12 +25,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := gcplus.o flash.o
+COBJS := gcplus.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
clean:
@@ -41,9 +45,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/gen860t/Makefile b/board/gen860t/Makefile
index dd7ecf1..9d36711 100644
--- a/board/gen860t/Makefile
+++ b/board/gen860t/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o beeper.o fpga.o ioport.o
+COBJS = $(BOARD).o flash.o beeper.o fpga.o ioport.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/genietv/Makefile b/board/genietv/Makefile
index 13ce9fc..e3d24b3 100644
--- a/board/genietv/Makefile
+++ b/board/genietv/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/gth/Makefile b/board/gth/Makefile
index 48f74cd..95bf072 100644
--- a/board/gth/Makefile
+++ b/board/gth/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o ee_access.o pcmcia.o
+COBJS = $(BOARD).o flash.o ee_access.o pcmcia.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/gth2/Makefile b/board/gth2/Makefile
index 8ef3a51..ed6a4a0 100644
--- a/board/gth2/Makefile
+++ b/board/gth2/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2005
+# (C) Copyright 2005-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,19 +23,23 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o ee_access.o
+COBJS = $(BOARD).o flash.o ee_access.o
SOBJS = lowlevel_init.o
-$(LIB): .depend $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/gw8260/Makefile b/board/gw8260/Makefile
index 827a6ac..bf5c508 100644
--- a/board/gw8260/Makefile
+++ b/board/gw8260/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := gw8260.o flash.o
+COBJS := gw8260.o flash.o
SOBJS :=
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/hermes/Makefile b/board/hermes/Makefile
index 13ce9fc..e3d24b3 100644
--- a/board/hermes/Makefile
+++ b/board/hermes/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/hidden_dragon/Makefile b/board/hidden_dragon/Makefile
index b9f1df6..9ac6a4d 100644
--- a/board/hidden_dragon/Makefile
+++ b/board/hidden_dragon/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2005
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/hmi1001/Makefile b/board/hmi1001/Makefile
index ed36ea7..4b2bbe2 100644
--- a/board/hmi1001/Makefile
+++ b/board/hmi1001/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2003-2004
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,11 +23,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o
+COBJS := $(BOARD).o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -38,9 +42,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/hymod/Makefile b/board/hymod/Makefile
index b52af9a..ff9fa90 100644
--- a/board/hymod/Makefile
+++ b/board/hymod/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o bsp.o eeprom.o fetch.o input.o env.o
+COBJS = $(BOARD).o flash.o bsp.o eeprom.o fetch.o input.o env.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/icecube/Makefile b/board/icecube/Makefile
index eb5ed59..8e61c79 100644
--- a/board/icecube/Makefile
+++ b/board/icecube/Makefile
@@ -1,6 +1,6 @@
#
-# (C) Copyright 2003
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -24,11 +24,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o flash.o
+COBJS := $(BOARD).o flash.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/icecube/config.mk b/board/icecube/config.mk
index 07b5de1..170779d 100644
--- a/board/icecube/config.mk
+++ b/board/icecube/config.mk
@@ -32,7 +32,7 @@
# 0x00100000 boot from RAM (for testing only)
#
-sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
ifndef TEXT_BASE
## Standard: boot high
diff --git a/board/icu862/Makefile b/board/icu862/Makefile
index 7b2b545..62db2f4 100644
--- a/board/icu862/Makefile
+++ b/board/icu862/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o pcmcia.o
+COBJS = $(BOARD).o flash.o pcmcia.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/ids8247/Makefile b/board/ids8247/Makefile
index cfef750..d423793 100644
--- a/board/ids8247/Makefile
+++ b/board/ids8247/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2005
# Heiko Schocher, DENX Software Engineering, <hs@denx.de>
#
@@ -23,18 +26,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
+
+COBJS = $(BOARD).o flash.o
-OBJS = $(BOARD).o flash.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): .depend $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/impa7/Makefile b/board/impa7/Makefile
index 08543f9..d77db72 100644
--- a/board/impa7/Makefile
+++ b/board/impa7/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := impa7.o flash.o
+COBJS := impa7.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
clean:
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/incaip/Makefile b/board/incaip/Makefile
index d9b0e2d..13986b8 100644
--- a/board/incaip/Makefile
+++ b/board/incaip/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2003
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,19 +23,23 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
SOBJS = lowlevel_init.o
-$(LIB): .depend $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/inka4x0/Makefile b/board/inka4x0/Makefile
index bf83292..d00e05d 100644
--- a/board/inka4x0/Makefile
+++ b/board/inka4x0/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2003-2004
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,11 +23,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o flash.o
+COBJS := $(BOARD).o flash.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -38,9 +42,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/innokom/Makefile b/board/innokom/Makefile
index 73f6a74..f4cc6cf 100644
--- a/board/innokom/Makefile
+++ b/board/innokom/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := innokom.o flash.o
+COBJS := innokom.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
clean:
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/integratorap/Makefile b/board/integratorap/Makefile
index 358df62..5b3729b 100644
--- a/board/integratorap/Makefile
+++ b/board/integratorap/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# (C) Copyright 2004
@@ -27,13 +27,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := integratorap.o flash.o
+COBJS := integratorap.o flash.o
SOBJS := lowlevel_init.o memsetup.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -43,9 +47,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/integratorap/config.mk b/board/integratorap/config.mk
index 25b79b3..e4c5c3b 100644
--- a/board/integratorap/config.mk
+++ b/board/integratorap/config.mk
@@ -3,3 +3,9 @@
#
TEXT_BASE = 0x01000000
+
+ifneq ($(OBJTREE),$(SRCTREE))
+# We are building u-boot in a separate directory, use generated
+# .lds script from OBJTREE directory.
+LDSCRIPT := $(OBJTREE)/board/$(BOARDDIR)/u-boot.lds
+endif
diff --git a/board/integratorap/split_by_variant.sh b/board/integratorap/split_by_variant.sh
index 9f71bab..53b0d1e 100755
--- a/board/integratorap/split_by_variant.sh
+++ b/board/integratorap/split_by_variant.sh
@@ -103,14 +103,17 @@ then
echo -n "#undef CONFIG_CM_TCRAM " >> tmp.fil
echo " /* CM may not have TCRAM */" >> tmp.fil
fi
-mv tmp.fil ./include/config.h
+
+mkdir -p ${obj}include
+mkdir -p ${obj}board/integratorap
+mv tmp.fil ${obj}include/config.h
# ---------------------------------------------------------
# Ensure correct core object loaded first in U-Boot image
# ---------------------------------------------------------
-sed -r 's/CPU_FILE/cpu\/'$cpu'\/start.o/; s/#.*//' board/integratorap/u-boot.lds.template > board/integratorap/u-boot.lds
+sed -r 's/CPU_FILE/cpu\/'$cpu'\/start.o/; s/#.*//' ${src}board/integratorap/u-boot.lds.template > ${obj}board/integratorap/u-boot.lds
# ---------------------------------------------------------
# Complete the configuration
# ---------------------------------------------------------
-./mkconfig -a integratorap arm $cpu integratorap;
+$MKCONFIG -a integratorap arm $cpu integratorap;
echo "Variant:: $variant with core $cpu"
diff --git a/board/integratorcp/Makefile b/board/integratorcp/Makefile
index 3d589fc..efafeb6 100644
--- a/board/integratorcp/Makefile
+++ b/board/integratorcp/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := integratorcp.o flash.o
+COBJS := integratorcp.o flash.o
SOBJS := lowlevel_init.o memsetup.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/integratorcp/config.mk b/board/integratorcp/config.mk
index 25b79b3..e4c5c3b 100644
--- a/board/integratorcp/config.mk
+++ b/board/integratorcp/config.mk
@@ -3,3 +3,9 @@
#
TEXT_BASE = 0x01000000
+
+ifneq ($(OBJTREE),$(SRCTREE))
+# We are building u-boot in a separate directory, use generated
+# .lds script from OBJTREE directory.
+LDSCRIPT := $(OBJTREE)/board/$(BOARDDIR)/u-boot.lds
+endif
diff --git a/board/integratorcp/split_by_variant.sh b/board/integratorcp/split_by_variant.sh
index 3a35433..37ae517 100755
--- a/board/integratorcp/split_by_variant.sh
+++ b/board/integratorcp/split_by_variant.sh
@@ -98,14 +98,17 @@ then
echo -n "#undef CONFIG_CM_TCRAM " >> tmp.fil
echo " /* CM may not have TCRAM */" >> tmp.fil
fi
-mv tmp.fil ./include/config.h
+
+mkdir -p ${obj}include
+mkdir -p ${obj}board/integratorcp
+mv tmp.fil ${obj}include/config.h
# ---------------------------------------------------------
# Ensure correct core object loaded first in U-Boot image
# ---------------------------------------------------------
-sed -r 's/CPU_FILE/cpu\/'$cpu'\/start.o/; s/#.*//' board/integratorcp/u-boot.lds.template > board/integratorcp/u-boot.lds
+sed -r 's/CPU_FILE/cpu\/'$cpu'\/start.o/; s/#.*//' ${src}board/integratorcp/u-boot.lds.template > ${obj}board/integratorcp/u-boot.lds
# ---------------------------------------------------------
# Complete the configuration
# ---------------------------------------------------------
-./mkconfig -a integratorcp arm $cpu integratorcp;
+$MKCONFIG -a integratorcp arm $cpu integratorcp;
echo "Variant:: $variant with core $cpu"
diff --git a/board/ip860/Makefile b/board/ip860/Makefile
index 13ce9fc..e3d24b3 100644
--- a/board/ip860/Makefile
+++ b/board/ip860/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/iphase4539/Makefile b/board/iphase4539/Makefile
index 19da5d0..efdb1c1 100644
--- a/board/iphase4539/Makefile
+++ b/board/iphase4539/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2002 Wolfgang Grandegger <wg@denx.de>
#
# See file CREDITS for list of people who contributed to this
@@ -22,11 +25,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := $(BOARD).o flash.o
-OBJS := $(BOARD).o flash.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(OBJS) $(SOBJS)
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -37,9 +44,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/ispan/Makefile b/board/ispan/Makefile
index 9123a80..0c1cb02 100644
--- a/board/ispan/Makefile
+++ b/board/ispan/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# Copyright (C) 2004 Arabella Software Ltd.
# Yuli Barcohen <yuli@arabellasw.com>
#
@@ -23,11 +26,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o
+COBJS := $(BOARD).o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -38,9 +45,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/ivm/Makefile b/board/ivm/Makefile
index 13ce9fc..e3d24b3 100644
--- a/board/ivm/Makefile
+++ b/board/ivm/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/ixdp425/Makefile b/board/ixdp425/Makefile
index 59d6964..9568cb5 100644
--- a/board/ixdp425/Makefile
+++ b/board/ixdp425/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := ixdp425.o
+COBJS := ixdp425.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) crv $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +42,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/ixdp425/config.mk b/board/ixdp425/config.mk
index 3420586..d49c0e7 100644
--- a/board/ixdp425/config.mk
+++ b/board/ixdp425/config.mk
@@ -1,4 +1,4 @@
TEXT_BASE = 0x00f80000
# include NPE ethernet driver
-BOARDLIBS = cpu/ixp/npe/libnpe.a
+BOARDLIBS = $(obj)cpu/ixp/npe/libnpe.a
diff --git a/board/jse/Makefile b/board/jse/Makefile
index 0da27b6..be6bd31 100644
--- a/board/jse/Makefile
+++ b/board/jse/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# Copyright 2004 Picture Elements, Inc.
# Stephen Williams <steve@icarus.com>
#
@@ -20,11 +23,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o sdram.o flash.o host_bridge.o
+COBJS = $(BOARD).o sdram.o flash.o host_bridge.o
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
@@ -36,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/kb9202/Makefile b/board/kb9202/Makefile
index f36d88d..2adcb58 100644
--- a/board/kb9202/Makefile
+++ b/board/kb9202/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2003
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -26,12 +26,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := kb9202.o
+COBJS := kb9202.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) crv $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -41,9 +45,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/kup/Makefile b/board/kup/Makefile
index 071f0d2..eac75a3 100644
--- a/board/kup/Makefile
+++ b/board/kup/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o kup.o
+COBJS = $(BOARD).o flash.o kup.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/kup/kup4k/Makefile b/board/kup/kup4k/Makefile
index 4a3954c..409e4cd 100644
--- a/board/kup/kup4k/Makefile
+++ b/board/kup/kup4k/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,19 +22,26 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o ../common/flash.o ../common/kup.o ../common/load_sernum_ethaddr.o ../common/pcmcia.o
+COBJS = $(BOARD).o ../common/flash.o ../common/kup.o ../common/load_sernum_ethaddr.o ../common/pcmcia.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/kup/kup4x/Makefile b/board/kup/kup4x/Makefile
index 4a3954c..409e4cd 100644
--- a/board/kup/kup4x/Makefile
+++ b/board/kup/kup4x/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,19 +22,26 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o ../common/flash.o ../common/kup.o ../common/load_sernum_ethaddr.o ../common/pcmcia.o
+COBJS = $(BOARD).o ../common/flash.o ../common/kup.o ../common/load_sernum_ethaddr.o ../common/pcmcia.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/lantec/Makefile b/board/lantec/Makefile
index 7a2014d..1b57d2b 100644
--- a/board/lantec/Makefile
+++ b/board/lantec/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/lart/Makefile b/board/lart/Makefile
index 550aa1d..7024c2b 100644
--- a/board/lart/Makefile
+++ b/board/lart/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := lart.o flash.o
+COBJS := lart.o flash.o
SOBJS := flashasm.o lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
clean:
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/logodl/Makefile b/board/logodl/Makefile
index c7cde7d..fff3a51 100644
--- a/board/logodl/Makefile
+++ b/board/logodl/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := logodl.o flash.o
+COBJS := logodl.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/lpd7a40x/Makefile b/board/lpd7a40x/Makefile
index ebe14df..692f2d5 100644
--- a/board/lpd7a40x/Makefile
+++ b/board/lpd7a40x/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001, 2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := lpd7a40x.o flash.o
+COBJS := lpd7a40x.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
clean:
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/lubbock/Makefile b/board/lubbock/Makefile
index 106622c..f562642 100644
--- a/board/lubbock/Makefile
+++ b/board/lubbock/Makefile
@@ -1,6 +1,6 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -24,12 +24,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := lubbock.o flash.o
+COBJS := lubbock.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
clean:
@@ -40,9 +44,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/lwmon/Makefile b/board/lwmon/Makefile
index 7b2b545..62db2f4 100644
--- a/board/lwmon/Makefile
+++ b/board/lwmon/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o pcmcia.o
+COBJS = $(BOARD).o flash.o pcmcia.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/m5271evb/Makefile b/board/m5271evb/Makefile
index 34de983..2951b96 100644
--- a/board/m5271evb/Makefile
+++ b/board/m5271evb/Makefile
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o
+COBJS = $(BOARD).o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/m5272c3/Makefile b/board/m5272c3/Makefile
index e5d8446..e3d24b3 100644
--- a/board/m5272c3/Makefile
+++ b/board/m5272c3/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2003
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/m5282evb/Makefile b/board/m5282evb/Makefile
index e5d8446..e3d24b3 100644
--- a/board/m5282evb/Makefile
+++ b/board/m5282evb/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2003
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/mbx8xx/Makefile b/board/mbx8xx/Makefile
index e4d1099..feadf24 100644
--- a/board/mbx8xx/Makefile
+++ b/board/mbx8xx/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o vpd.o pcmcia.o
+COBJS = $(BOARD).o flash.o vpd.o pcmcia.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/mcc200/Makefile b/board/mcc200/Makefile
index 7fdc088..eb1d059 100644
--- a/board/mcc200/Makefile
+++ b/board/mcc200/Makefile
@@ -23,11 +23,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o
+COBJS := $(BOARD).o lcd.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -38,9 +42,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/mcc200/config.mk b/board/mcc200/config.mk
index a822559..d0f9289 100644
--- a/board/mcc200/config.mk
+++ b/board/mcc200/config.mk
@@ -22,7 +22,7 @@
#
#
-# MCC200 board:
+# MCC200, PRS200 boards:
#
# Valid values for TEXT_BASE are:
#
@@ -31,7 +31,7 @@
# 0x00100000 boot from RAM (for testing only)
#
-sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
ifndef TEXT_BASE
## Standard: boot low
diff --git a/board/mcc200/lcd.c b/board/mcc200/lcd.c
new file mode 100644
index 0000000..b262516
--- /dev/null
+++ b/board/mcc200/lcd.c
@@ -0,0 +1,190 @@
+/*
+ * (C) Copyright 2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <lcd.h>
+#include <mpc5xxx.h>
+
+#ifdef CONFIG_LCD
+
+#define SWAPPED_LCD
+/*
+ * The name of the device used for communication
+ * with the PSoC.
+ */
+#define PSOC_PSC MPC5XXX_PSC2
+#define PSOC_BAUD 500000UL
+
+#define RTS_ASSERT 1
+#define RTS_NEGATE 0
+#define CTS_ASSERT 1
+#define CTS_NEGATE 0
+
+/*
+ * Dimensions in pixels
+ */
+#define LCD_WIDTH 160
+#define LCD_HEIGHT 100
+
+/*
+ * Dimensions in bytes
+ */
+#define LCD_BUF_SIZE ((LCD_WIDTH*LCD_HEIGHT)>>3)
+
+#if LCD_BPP != LCD_MONOCHROME
+#error "MCC200 support only monochrome displays (1 bpp)!"
+#endif
+
+#define PSOC_RETRIES 10 /* each of PSOC_WAIT_TIME */
+#define PSOC_WAIT_TIME 10 /* usec */
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * LCD information
+ */
+vidinfo_t panel_info = {
+ LCD_WIDTH, LCD_HEIGHT, LCD_BPP
+};
+
+int lcd_line_length;
+
+int lcd_color_fg;
+int lcd_color_bg;
+
+/*
+ * Frame buffer memory information
+ */
+void *lcd_base; /* Start of framebuffer memory */
+void *lcd_console_address; /* Start of console buffer */
+
+short console_col = 0;
+short console_row = 0;
+
+/*
+ * The device we use to communicate with PSoC
+ */
+int serial_inited = 0;
+
+/*
+ * Exported functions
+ */
+void lcd_initcolregs (void);
+void lcd_ctrl_init (void *lcdbase);
+void lcd_enable (void);
+
+/*
+ * Imported functions to support the PSoC protocol
+ */
+extern int serial_init_dev (unsigned long dev_base);
+extern void serial_setrts_dev (unsigned long dev_base, int s);
+extern int serial_getcts_dev (unsigned long dev_base);
+extern void serial_putc_raw_dev(unsigned long dev_base, const char c);
+
+/*
+ * Just stubs for our driver, needed for compiling compabilty with
+ * the common LCD driver code.
+ */
+void lcd_initcolregs (void)
+{
+}
+
+void lcd_ctrl_init (void *lcdbase)
+{
+}
+
+/*
+ * Function sends the contents of the frame-buffer to the LCD
+ */
+void lcd_enable (void)
+{
+ int i, retries, fb_size;
+
+ if (!serial_inited) {
+ unsigned long baud;
+
+ baud = gd->baudrate;
+ gd->baudrate = PSOC_BAUD;
+ serial_init_dev(PSOC_PSC);
+ gd->baudrate = baud;
+ serial_setrts_dev (PSOC_PSC, RTS_ASSERT);
+ serial_inited = 1;
+ }
+
+ /*
+ * Implement PSoC communication protocol:
+ * 1. Assert RTS, wait CTS assertion
+ * 2. Transmit data
+ * 3. Negate RTS, wait CTS negation
+ */
+
+ /* 1 */
+ serial_setrts_dev (PSOC_PSC, RTS_ASSERT);
+ for (retries = PSOC_RETRIES; retries; retries--) {
+ if (serial_getcts_dev(PSOC_PSC) == CTS_ASSERT)
+ break;
+ udelay (PSOC_WAIT_TIME);
+ }
+ if (!retries) {
+ printf ("%s Error: PSoC doesn't respond on "
+ "RTS ASSERT\n", __FUNCTION__);
+ }
+
+ /* 2 */
+ fb_size = panel_info.vl_row * (panel_info.vl_col >> 3);
+
+#if !defined(SWAPPED_LCD)
+ for (i=0; i<fb_size; i++) {
+ serial_putc_raw_dev (PSOC_PSC, ((char *)lcd_base)[i]);
+ }
+#else
+ {
+ int x, y, pwidth;
+ char *p = (char *)lcd_base;
+
+ pwidth = ((panel_info.vl_col+7) >> 3);
+ for (y=0; y<panel_info.vl_row; y++) {
+ i = y * pwidth;
+ for (x=0; x<pwidth; x+=5) {
+ serial_putc_raw_dev (PSOC_PSC, (p[i+x+2]<<4 & 0xF0) | (p[i+x+3]>>4 & 0x0F));
+ serial_putc_raw_dev (PSOC_PSC, (p[i+x+3]<<4 & 0xF0) | (p[i+x+4]>>4 & 0x0F));
+ serial_putc_raw_dev (PSOC_PSC, (p[i+x+4]<<4 & 0xF0) | (p[i+x]>>4 & 0x0F));
+ serial_putc_raw_dev (PSOC_PSC, (p[i+x]<<4 & 0xF0) | (p[i+x+1]>>4 & 0x0F));
+ serial_putc_raw_dev (PSOC_PSC, (p[i+x+1]<<4 & 0xF0) | (p[i+x+2]>>4 & 0x0F));
+ }
+ }
+ }
+#endif
+
+ /* 3 */
+ serial_setrts_dev (PSOC_PSC, RTS_NEGATE);
+ for (retries = PSOC_RETRIES; retries; retries--) {
+ if (serial_getcts_dev(PSOC_PSC) == CTS_NEGATE)
+ break;
+ udelay (PSOC_WAIT_TIME);
+ }
+ if (!retries) {
+ printf ("%s Error: PSoC doesn't respond on "
+ "RTS NEGATE\n", __FUNCTION__);
+ }
+
+ return;
+}
+#endif /* CONFIG_LCD */
diff --git a/board/mcc200/mcc200.c b/board/mcc200/mcc200.c
index 167dc0f..71a691b 100644
--- a/board/mcc200/mcc200.c
+++ b/board/mcc200/mcc200.c
@@ -197,12 +197,18 @@ long int initdram (int board_type)
int checkboard (void)
{
+#if defined(CONFIG_PRS200)
+ puts ("Board: PRS200\n");
+#else
puts ("Board: MCC200\n");
+#endif
return 0;
}
int misc_init_r (void)
{
+ ulong flash_sup_end, snum;
+
/*
* Adjust flash start and offset to detected values
*/
@@ -257,6 +263,12 @@ int misc_init_r (void)
(flash_info[0].start[0] - 1) + flash_info[0].size,
&flash_info[0]);
*(volatile int*)MPC5XXX_CS0_CFG &= ~(1 << 6);
+ printf ("Warning: Only 32 of 64 MB of Flash are accessible from U-Boot\n");
+ flash_info[0].size = 32 << 20;
+ for (snum = 0, flash_sup_end = gd->bd->bi_flashstart + (32<<20);
+ flash_info[0].start[snum] < flash_sup_end;
+ snum++);
+ flash_info[0].sector_count = snum;
}
return (0);
diff --git a/board/ml2/Makefile b/board/ml2/Makefile
index 40c60b1..ce5ba19 100644
--- a/board/ml2/Makefile
+++ b/board/ml2/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,11 +23,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o serial.o
+COBJS = $(BOARD).o flash.o serial.o
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/modnet50/Makefile b/board/modnet50/Makefile
index ab2c376..ae4de57 100644
--- a/board/modnet50/Makefile
+++ b/board/modnet50/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := modnet50.o flash.o
+COBJS := modnet50.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/mousse/Makefile b/board/mousse/Makefile
index ddc5546..490ac3b 100644
--- a/board/mousse/Makefile
+++ b/board/mousse/Makefile
@@ -1,6 +1,6 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -24,18 +24,21 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o m48t59y.o pci.o flash.o
+COBJS = $(BOARD).o m48t59y.o pci.o flash.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): .depend $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/mp2usb/Makefile b/board/mp2usb/Makefile
index b6ea3cf..c1e7ffd 100644
--- a/board/mp2usb/Makefile
+++ b/board/mp2usb/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2003
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := mp2usb.o flash.o
+COBJS := mp2usb.o flash.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) crv $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +42,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/mpc8260ads/Makefile b/board/mpc8260ads/Makefile
index cc519d1..e1e0a0f 100644
--- a/board/mpc8260ads/Makefile
+++ b/board/mpc8260ads/Makefile
@@ -1,6 +1,6 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -24,11 +24,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o flash.o
+COBJS := $(BOARD).o flash.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/mpc8260ads/config.mk b/board/mpc8260ads/config.mk
index eb6f7c9..e99e181 100644
--- a/board/mpc8260ads/config.mk
+++ b/board/mpc8260ads/config.mk
@@ -29,7 +29,7 @@
# MPC8260ADS, MPC8266ADS, and PQ2FADS-ZU/VR boards
#
-sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
ifndef TEXT_BASE
## Standard: boot high
diff --git a/board/mpc8266ads/Makefile b/board/mpc8266ads/Makefile
index cd0f40b..157c969 100644
--- a/board/mpc8266ads/Makefile
+++ b/board/mpc8266ads/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,11 +23,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o flash.o
+COBJS := $(BOARD).o flash.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -38,9 +42,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/mpc8349emds/Makefile b/board/mpc8349emds/Makefile
index 38bbb67..e699086 100644
--- a/board/mpc8349emds/Makefile
+++ b/board/mpc8349emds/Makefile
@@ -23,11 +23,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o
+COBJS := $(BOARD).o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -38,9 +42,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/mpc8540ads/Makefile b/board/mpc8540ads/Makefile
index 5d8ea34..3f1e8f2 100644
--- a/board/mpc8540ads/Makefile
+++ b/board/mpc8540ads/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o
+COBJS := $(BOARD).o
SOBJS := init.o
#SOBJS :=
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -40,9 +44,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/mpc8540eval/Makefile b/board/mpc8540eval/Makefile
index 6f1995e..0a83970 100644
--- a/board/mpc8540eval/Makefile
+++ b/board/mpc8540eval/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,14 +23,18 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o flash.o
-#OBJS := $(BOARD).o flash.o $(BOARD)_slave.o
+COBJS := $(BOARD).o flash.o
+#COBJS := $(BOARD).o flash.o $(BOARD)_slave.o
SOBJS := init.o
#SOBJS :=
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -41,9 +45,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/mpc8560ads/Makefile b/board/mpc8560ads/Makefile
index 5d8ea34..3f1e8f2 100644
--- a/board/mpc8560ads/Makefile
+++ b/board/mpc8560ads/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o
+COBJS := $(BOARD).o
SOBJS := init.o
#SOBJS :=
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -40,9 +44,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/mpl/mip405/Makefile b/board/mpl/mip405/Makefile
index 9276f64..87e507e 100644
--- a/board/mpl/mip405/Makefile
+++ b/board/mpl/mip405/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,14 +22,21 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o ../common/flash.o cmd_mip405.o ../common/pci.o \
+COBJS = $(BOARD).o ../common/flash.o cmd_mip405.o ../common/pci.o \
../common/usb_uhci.o ../common/memtst.o ../common/common_util.o
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
@@ -41,9 +48,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/mpl/pati/Makefile b/board/mpl/pati/Makefile
index 1a9ce12..c469e3f 100644
--- a/board/mpl/pati/Makefile
+++ b/board/mpl/pati/Makefile
@@ -1,6 +1,6 @@
#
-# (C) Copyright 2001 Wolfgang Denk, DENX Software Engineering, wd@denx.de
-#
+# (C) Copyright 2001-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de
#
# See file CREDITS for list of people who contributed to this
# project.
@@ -22,14 +22,20 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := pati.o ../common/flash.o ../common/memtst.o cmd_pati.o ../common/common_util.o
+COBJS := pati.o ../common/flash.o ../common/memtst.o cmd_pati.o ../common/common_util.o
#### cmd_pati.o
-SOBJS :=
-$(LIB): $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -40,9 +46,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/mpl/pip405/Makefile b/board/mpl/pip405/Makefile
index a818d08..833900d 100644
--- a/board/mpl/pip405/Makefile
+++ b/board/mpl/pip405/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,10 +22,13 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o \
+COBJS = $(BOARD).o \
../common/flash.o cmd_pip405.o ../common/pci.o \
../common/isa.o ../common/kbd.o \
../common/usb_uhci.o \
@@ -33,6 +36,10 @@ OBJS = $(BOARD).o \
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
@@ -44,9 +51,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/mpl/vcma9/Makefile b/board/mpl/vcma9/Makefile
index 304c965..bd76e74 100644
--- a/board/mpl/vcma9/Makefile
+++ b/board/mpl/vcma9/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001, 2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,15 +22,22 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := vcma9.o flash.o cmd_vcma9.o
-OBJS += ../common/common_util.o ../common/memtst.o
+COBJS := vcma9.o flash.o cmd_vcma9.o
+COBJS += ../common/common_util.o ../common/memtst.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
clean:
@@ -41,9 +48,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/musenki/Makefile b/board/musenki/Makefile
index 24dc026..1b57d2b 100644
--- a/board/musenki/Makefile
+++ b/board/musenki/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,19 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
-SOBJS =
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/mvblue/Makefile b/board/mvblue/Makefile
index 24dc026..1b57d2b 100644
--- a/board/mvblue/Makefile
+++ b/board/mvblue/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,19 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
-SOBJS =
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/mvs1/Makefile b/board/mvs1/Makefile
index 13ce9fc..e3d24b3 100644
--- a/board/mvs1/Makefile
+++ b/board/mvs1/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/mx1ads/Makefile b/board/mx1ads/Makefile
index 3e805fe..96e5be5 100644
--- a/board/mx1ads/Makefile
+++ b/board/mx1ads/Makefile
@@ -1,6 +1,9 @@
#
# board/mx1ads/Makefile
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (c) Copyright 2004
# Techware Information Technology, Inc.
# http://www.techware.com.tw/
@@ -24,12 +27,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := mx1ads.o syncflash.o
+COBJS := mx1ads.o syncflash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
clean:
@@ -40,9 +47,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/mx1fs2/Makefile b/board/mx1fs2/Makefile
index 9e3bca1..2a17f82 100644
--- a/board/mx1fs2/Makefile
+++ b/board/mx1fs2/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := mx1fs2.o flash.o
+COBJS := mx1fs2.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/nc650/Makefile b/board/nc650/Makefile
index 8dc4934..f044727 100644
--- a/board/nc650/Makefile
+++ b/board/nc650/Makefile
@@ -1,6 +1,6 @@
#
# (C) Copyright 2006 Detlev Zundel, dzu@denx.de
-# (C) Copyright 2004
+# (C) Copyright 2004-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -24,18 +24,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o nand.o flash.o
+COBJS = $(BOARD).o nand.o flash.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/nc650/config.mk b/board/nc650/config.mk
index 5b2284a..52c8ffe 100644
--- a/board/nc650/config.mk
+++ b/board/nc650/config.mk
@@ -27,4 +27,4 @@
#
TEXT_BASE = 0x40700000
-BOARDLIBS = drivers/nand/libnand.a
+BOARDLIBS = $(obj)drivers/nand/libnand.a
diff --git a/board/netphone/Makefile b/board/netphone/Makefile
index b3c1797..a8b2159 100644
--- a/board/netphone/Makefile
+++ b/board/netphone/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o phone_console.o
+COBJS = $(BOARD).o flash.o phone_console.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/netstar/Makefile b/board/netstar/Makefile
index 3a20501..b7c092d 100644
--- a/board/netstar/Makefile
+++ b/board/netstar/Makefile
@@ -1,3 +1,6 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# (C) Copyright 2005
# Ladislav Michl, 2N Telekomunikace, michl@2n.cz
@@ -23,63 +26,71 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := netstar.o flash.o nand.o
+COBJS := netstar.o flash.o nand.o
SOBJS := setup.o crcek.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) eeprom.c \
+ eeprom_start.S
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
gcclibdir := $(shell dirname `$(CC) -print-libgcc-file-name`)
LOAD_ADDR = 0x10400000
LDSCRIPT = $(TOPDIR)/board/$(BOARDDIR)/eeprom.lds
+lnk = $(if $(obj),$(obj),.)
HOST_CFLAGS = -Wall -pedantic -I$(TOPDIR)/include
-all: $(LIB) eeprom.srec eeprom.bin crcek.srec crcek.bin crcit
+all: $(obj).depend $(LIB) $(obj)eeprom.srec $(obj)eeprom.bin \
+ $(obj)crcek.srec $(obj)crcek.bin $(obj)crcit
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $^
-eeprom.srec: eeprom.o eeprom_start.o
- $(LD) -T $(LDSCRIPT) -g -Ttext $(LOAD_ADDR) \
- -o $(<:.o=) -e $(<:.o=) $^ \
- -L../../examples -lstubs \
- -L../../lib_generic -lgeneric \
+$(obj)eeprom.srec: $(obj)eeprom.o $(obj)eeprom_start.o
+ cd $(lnk) && $(LD) -T $(LDSCRIPT) -g -Ttext $(LOAD_ADDR) \
+ -o $(<:.o=) -e eeprom eeprom.o eeprom_start.o \
+ -L$(obj)../../examples -lstubs \
+ -L$(obj)../../lib_generic -lgeneric \
-L$(gcclibdir) -lgcc
$(OBJCOPY) -O srec $(<:.o=) $@
-eeprom.bin: eeprom.srec
+$(obj)eeprom.bin: $(obj)eeprom.srec
$(OBJCOPY) -I srec -O binary $< $@ 2>/dev/null
-crcek.srec: crcek.o
+$(obj)crcek.srec: $(obj)crcek.o
$(LD) -g -Ttext 0x00000000 \
- -o $(<:.o=) -e $(<:.o=) $^
+ -o $(<:.o=) -e crcek $^
$(OBJCOPY) -O srec $(<:.o=) $@
-crcek.bin: crcek.srec
+$(obj)crcek.bin: $(obj)crcek.srec
$(OBJCOPY) -I srec -O binary $< $@ 2>/dev/null
-crcit: crcit.o crc32.o
+$(obj)crcit: $(obj)crcit.o $(obj)crc32.o
$(HOSTCC) $(HOST_CFLAGS) -o $@ $^
-crcit.o: crcit.c
- $(HOSTCC) $(HOST_CFLAGS) -c $<
+$(obj)crcit.o: crcit.c
+ $(HOSTCC) $(HOST_CFLAGS) -o $@ -c $<
-crc32.o: $(TOPDIR)/tools/crc32.c
- $(HOSTCC) $(HOST_CFLAGS) -DUSE_HOSTCC -c $<
+$(obj)crc32.o: $(OBJTREE)/tools/crc32.c
+ $(HOSTCC) $(HOST_CFLAGS) -DUSE_HOSTCC -o $@ -c $<
clean:
- rm -f $(SOBJS) $(OBJS) eeprom eeprom.srec eeprom.bin \
- crcek crcek.srec crcek.bin
+ rm -f $(SOBJS) $(OBJS) $(obj)eeprom $(obj)eeprom.srec \
+ $(obj)eeprom.bin $(obj)crcek $(obj)crcek.srec \
+ $(obj)crcek.bin
distclean: clean
rm -f $(LIB) core *.bak .depend
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/netstar/crcit b/board/netstar/crcit
deleted file mode 100755
index 203645d..0000000
--- a/board/netstar/crcit
+++ /dev/null
Binary files differ
diff --git a/board/netta/Makefile b/board/netta/Makefile
index ee200c2..39362c6 100644
--- a/board/netta/Makefile
+++ b/board/netta/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o dsp.o codec.o pcmcia.o
+COBJS = $(BOARD).o flash.o dsp.o codec.o pcmcia.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/netta2/Makefile b/board/netta2/Makefile
index d457020..e3d24b3 100644
--- a/board/netta2/Makefile
+++ b/board/netta2/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/netvia/Makefile b/board/netvia/Makefile
index 13ce9fc..e3d24b3 100644
--- a/board/netvia/Makefile
+++ b/board/netvia/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/ns9750dev/Makefile b/board/ns9750dev/Makefile
index fb4333c..defc29b 100644
--- a/board/ns9750dev/Makefile
+++ b/board/ns9750dev/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001, 2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := ns9750dev.o flash.o led.o
+COBJS := ns9750dev.o flash.o led.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
clean:
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/nx823/Makefile b/board/nx823/Makefile
index 7a2014d..1b57d2b 100644
--- a/board/nx823/Makefile
+++ b/board/nx823/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/o2dnt/Makefile b/board/o2dnt/Makefile
index 2eb4366..626f610 100644
--- a/board/o2dnt/Makefile
+++ b/board/o2dnt/Makefile
@@ -1,6 +1,6 @@
#
-# (C) Copyright 2005
+# (C) Copyright 2005-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -24,11 +24,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o flash.o
+COBJS := $(BOARD).o flash.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/omap1510inn/Makefile b/board/omap1510inn/Makefile
index 902b24e..7cdc8d0 100644
--- a/board/omap1510inn/Makefile
+++ b/board/omap1510inn/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001, 2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := omap1510innovator.o
+COBJS := omap1510innovator.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/omap1610inn/Makefile b/board/omap1610inn/Makefile
index 4560102..e523dc6 100644
--- a/board/omap1610inn/Makefile
+++ b/board/omap1610inn/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001, 2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := omap1610innovator.o flash.o
+COBJS := omap1610innovator.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/omap2420h4/Makefile b/board/omap2420h4/Makefile
index ed47868..767a9d6 100644
--- a/board/omap2420h4/Makefile
+++ b/board/omap2420h4/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001, 2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := omap2420h4.o mem.o sys_info.o
+COBJS := omap2420h4.o mem.o sys_info.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/omap5912osk/Makefile b/board/omap5912osk/Makefile
index 4b56421..c734b43 100644
--- a/board/omap5912osk/Makefile
+++ b/board/omap5912osk/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := omap5912osk.o
+COBJS := omap5912osk.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/omap730p2/Makefile b/board/omap730p2/Makefile
index 29467ac..d678fd5 100644
--- a/board/omap730p2/Makefile
+++ b/board/omap730p2/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001, 2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := omap730p2.o flash.o
+COBJS := omap730p2.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/oxc/Makefile b/board/oxc/Makefile
index ae7a932..e3d24b3 100644
--- a/board/oxc/Makefile
+++ b/board/oxc/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/pb1x00/Makefile b/board/pb1x00/Makefile
index d1cdc6b..d1e9ad3 100644
--- a/board/pb1x00/Makefile
+++ b/board/pb1x00/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2003
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,19 +23,23 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
SOBJS = memsetup.o
-$(LIB): .depend $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/pcippc2/Makefile b/board/pcippc2/Makefile
index 2998f23..2af3286 100644
--- a/board/pcippc2/Makefile
+++ b/board/pcippc2/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2002
+# (C) Copyright 2002-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,23 +23,25 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
COBJS = $(BOARD).o cpc710_pci.o flash.o sconsole.o \
fpga_serial.o pcippc2_fpga.o cpc710_init_ram.o i2c.o
-AOBJS =
+SOBJS =
-OBJS = $(COBJS) $(AOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS) $(SOBJS)
#########################################################################
-.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/pcs440ep/Makefile b/board/pcs440ep/Makefile
index 4a2a388..9da90c1 100644
--- a/board/pcs440ep/Makefile
+++ b/board/pcs440ep/Makefile
@@ -23,11 +23,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/pleb2/Makefile b/board/pleb2/Makefile
index 95d9170..0799772 100644
--- a/board/pleb2/Makefile
+++ b/board/pleb2/Makefile
@@ -1,6 +1,6 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -24,12 +24,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := pleb2.o flash.o
+COBJS := pleb2.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
clean:
@@ -40,9 +44,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/pm520/Makefile b/board/pm520/Makefile
index 8cf0d7d..8e61c79 100644
--- a/board/pm520/Makefile
+++ b/board/pm520/Makefile
@@ -1,6 +1,6 @@
#
-# (C) Copyright 2003-2004
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -24,11 +24,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o flash.o
+COBJS := $(BOARD).o flash.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/pm826/Makefile b/board/pm826/Makefile
index 7a2014d..1b57d2b 100644
--- a/board/pm826/Makefile
+++ b/board/pm826/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/pm826/config.mk b/board/pm826/config.mk
index c93bad9..48ac299 100644
--- a/board/pm826/config.mk
+++ b/board/pm826/config.mk
@@ -26,7 +26,7 @@
#
-sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
ifndef TEXT_BASE
## Standard: boot 64-bit flash
diff --git a/board/pm828/Makefile b/board/pm828/Makefile
index b9ef0c0..1b57d2b 100644
--- a/board/pm828/Makefile
+++ b/board/pm828/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001-2004
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/pm828/config.mk b/board/pm828/config.mk
index e894af7..6288431 100644
--- a/board/pm828/config.mk
+++ b/board/pm828/config.mk
@@ -26,7 +26,7 @@
#
-sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
ifndef TEXT_BASE
## Standard: boot 64-bit flash
diff --git a/board/pm854/Makefile b/board/pm854/Makefile
index 7828166..3f1e8f2 100644
--- a/board/pm854/Makefile
+++ b/board/pm854/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001-2005
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o
+COBJS := $(BOARD).o
SOBJS := init.o
#SOBJS :=
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -40,9 +44,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/pm856/Makefile b/board/pm856/Makefile
index 5d8ea34..3f1e8f2 100644
--- a/board/pm856/Makefile
+++ b/board/pm856/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o
+COBJS := $(BOARD).o
SOBJS := init.o
#SOBJS :=
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -40,9 +44,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/pn62/Makefile b/board/pn62/Makefile
index e85d4fd..a837820 100644
--- a/board/pn62/Makefile
+++ b/board/pn62/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o cmd_pn62.o misc.o
+COBJS = $(BOARD).o cmd_pn62.o misc.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/ppmc7xx/Makefile b/board/ppmc7xx/Makefile
index c378677..1655b3e 100644
--- a/board/ppmc7xx/Makefile
+++ b/board/ppmc7xx/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := ppmc7xx.o pci.o flash.o
SOBJS := init.o
-$(LIB): .depend $(OBJS) $(SOBJS)
+COBJS := ppmc7xx.o pci.o flash.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
clean:
@@ -39,9 +44,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/ppmc8260/Makefile b/board/ppmc8260/Makefile
index 351f4ee..e17cb7a 100644
--- a/board/ppmc8260/Makefile
+++ b/board/ppmc8260/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,11 +23,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := ppmc8260.o
+COBJS := ppmc8260.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -38,9 +42,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/prodrive/alpr/Makefile b/board/prodrive/alpr/Makefile
index 8fc6009..993ad19 100644
--- a/board/prodrive/alpr/Makefile
+++ b/board/prodrive/alpr/Makefile
@@ -23,11 +23,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o fpga.o nand.o
+COBJS = $(BOARD).o fpga.o nand.o
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/prodrive/p3p440/Makefile b/board/prodrive/p3p440/Makefile
index 47116d3..a47a067 100644
--- a/board/prodrive/p3p440/Makefile
+++ b/board/prodrive/p3p440/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2002
+# (C) Copyright 2002-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,11 +23,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o
+COBJS = $(BOARD).o
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/prodrive/pdnb3/Makefile b/board/prodrive/pdnb3/Makefile
index f3cd5a3..32ffac0 100644
--- a/board/prodrive/pdnb3/Makefile
+++ b/board/prodrive/pdnb3/Makefile
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := flash.o pdnb3.o nand.o
+COBJS := flash.o pdnb3.o nand.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) crv $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -38,9 +42,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/prodrive/pdnb3/config.mk b/board/prodrive/pdnb3/config.mk
index 6b0f18b..7670758 100644
--- a/board/prodrive/pdnb3/config.mk
+++ b/board/prodrive/pdnb3/config.mk
@@ -1,4 +1,4 @@
TEXT_BASE = 0x01f00000
# include NPE ethernet driver
-BOARDLIBS = cpu/ixp/npe/libnpe.a
+BOARDLIBS = $(obj)cpu/ixp/npe/libnpe.a
diff --git a/board/psyent/pci5441/Makefile b/board/psyent/pci5441/Makefile
index 8e55c9b..7d74b4e 100644
--- a/board/psyent/pci5441/Makefile
+++ b/board/psyent/pci5441/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001-2004
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -12,7 +12,7 @@
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
@@ -22,17 +22,22 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
COMOBJS := ../common/AMDLV065D.o
-OBJS := $(BOARD).o $(COMOBJS)
+COBJS := $(BOARD).o $(COMOBJS)
-SOBJS =
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) crv $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -42,9 +47,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/psyent/pk1c20/Makefile b/board/psyent/pk1c20/Makefile
index 5c1db03..cbe9919 100644
--- a/board/psyent/pk1c20/Makefile
+++ b/board/psyent/pk1c20/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001-2004
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -12,7 +12,7 @@
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
@@ -22,17 +22,22 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
COMOBJS := ../common/AMDLV065D.o
-OBJS := $(BOARD).o led.o $(COMOBJS)
+COBJS := $(BOARD).o led.o $(COMOBJS)
-SOBJS =
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) crv $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -42,9 +47,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/purple/Makefile b/board/purple/Makefile
index b2f2fc0..1262d80 100644
--- a/board/purple/Makefile
+++ b/board/purple/Makefile
@@ -1,6 +1,6 @@
#
-# (C) Copyright 2003
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -24,19 +24,23 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o sconsole.o
+COBJS = $(BOARD).o flash.o sconsole.o
SOBJS = lowlevel_init.o
-$(LIB): .depend $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/pxa255_idp/Makefile b/board/pxa255_idp/Makefile
index b5f352a..2d0077b 100644
--- a/board/pxa255_idp/Makefile
+++ b/board/pxa255_idp/Makefile
@@ -1,6 +1,6 @@
#
-# (C) Copyright 2000-2005
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -24,12 +24,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := pxa_idp.o
+COBJS := pxa_idp.o
SOBJS := memsetup.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
clean:
@@ -40,9 +44,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/quantum/Makefile b/board/quantum/Makefile
index e50f5ff..602865f 100644
--- a/board/quantum/Makefile
+++ b/board/quantum/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,19 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o fpga.o
+COBJS = $(BOARD).o fpga.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): .depend $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/r360mpi/Makefile b/board/r360mpi/Makefile
index 1a7e7a6..0179b46 100644
--- a/board/r360mpi/Makefile
+++ b/board/r360mpi/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o pcmcia.o
+COBJS = $(BOARD).o flash.o pcmcia.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/r5200/Makefile b/board/r5200/Makefile
index d0364ed..2951b96 100644
--- a/board/r5200/Makefile
+++ b/board/r5200/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2003
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o
+COBJS = $(BOARD).o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/rattler/Makefile b/board/rattler/Makefile
index 52f0fd6..e880f87 100644
--- a/board/rattler/Makefile
+++ b/board/rattler/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001-2005
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,11 +23,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o
+COBJS := $(BOARD).o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -38,9 +42,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/rbc823/Makefile b/board/rbc823/Makefile
index 0121ddc..f004881 100644
--- a/board/rbc823/Makefile
+++ b/board/rbc823/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o kbd.o
+COBJS = $(BOARD).o flash.o kbd.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/rmu/Makefile b/board/rmu/Makefile
index 13ce9fc..e3d24b3 100644
--- a/board/rmu/Makefile
+++ b/board/rmu/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/rpxsuper/Makefile b/board/rpxsuper/Makefile
index 4535106..2689c6b 100644
--- a/board/rpxsuper/Makefile
+++ b/board/rpxsuper/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,11 +23,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := rpxsuper.o flash.o mii_phy.o
+COBJS := rpxsuper.o flash.o mii_phy.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -38,9 +42,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/rsdproto/Makefile b/board/rsdproto/Makefile
index 9934787..4a7bd3d 100644
--- a/board/rsdproto/Makefile
+++ b/board/rsdproto/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,25 +23,29 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := rsdproto.o flash.o
+COBJS := rsdproto.o flash.o
SOBJS := flash_asm.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
distclean: clean
- rm -f $(LIB) core *.bak .depend
+ rm -f $(LIB) core *.bak $(obj).depend
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/sacsng/Makefile b/board/sacsng/Makefile
index baefa4a..2dff242 100644
--- a/board/sacsng/Makefile
+++ b/board/sacsng/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,11 +23,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := sacsng.o flash.o clkinit.o
+COBJS := sacsng.o flash.o clkinit.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -38,9 +42,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/sandburst/karef/Makefile b/board/sandburst/karef/Makefile
index 8b3173c..60d5573 100644
--- a/board/sandburst/karef/Makefile
+++ b/board/sandburst/karef/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2005
# Sandburst Corporation
# Travis B. Sawyer
@@ -23,6 +26,9 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
# TBS: add for debugging purposes
BUILDUSER := $(shell whoami)
@@ -32,13 +38,16 @@ CFLAGS += -DBUILDUSER='"$(BUILDUSER)"'
# TBS: end debugging
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o ../common/flash.o ../common/ppc440gx_i2c.o \
+COBJS = $(BOARD).o ../common/flash.o ../common/ppc440gx_i2c.o \
../common/sb_common.o
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
@@ -51,9 +60,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/sandburst/metrobox/Makefile b/board/sandburst/metrobox/Makefile
index 06a9a22..9579512 100644
--- a/board/sandburst/metrobox/Makefile
+++ b/board/sandburst/metrobox/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2005
# Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
#
@@ -22,6 +25,9 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
# TBS: add for debugging purposes
BUILDUSER := $(shell whoami)
@@ -31,12 +37,15 @@ CFLAGS += -DBUILDUSER='"$(BUILDUSER)"'
# TBS: end debugging
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o ../common/flash.o ../common/ppc440gx_i2c.o \
+COBJS = $(BOARD).o ../common/flash.o ../common/ppc440gx_i2c.o \
../common/sb_common.o
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
@@ -49,9 +58,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/sandpoint/Makefile b/board/sandpoint/Makefile
index d6bbf2f..e3d24b3 100644
--- a/board/sandpoint/Makefile
+++ b/board/sandpoint/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/sbc2410x/Makefile b/board/sbc2410x/Makefile
index ae8665e..908b5ff 100644
--- a/board/sbc2410x/Makefile
+++ b/board/sbc2410x/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001, 2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := sbc2410x.o flash.o
+COBJS := sbc2410x.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
clean:
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/sbc405/Makefile b/board/sbc405/Makefile
index c4198c4..9b9f033 100644
--- a/board/sbc405/Makefile
+++ b/board/sbc405/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,9 +23,13 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o strataflash.o
+COBJS = $(BOARD).o strataflash.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
@@ -38,9 +42,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/sbc8240/Makefile b/board/sbc8240/Makefile
index 7a2014d..1b57d2b 100644
--- a/board/sbc8240/Makefile
+++ b/board/sbc8240/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/sbc8260/Makefile b/board/sbc8260/Makefile
index 14ed457..7077a82 100644
--- a/board/sbc8260/Makefile
+++ b/board/sbc8260/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,11 +23,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := sbc8260.o flash.o
+COBJS := sbc8260.o flash.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -38,9 +42,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/sbc8560/Makefile b/board/sbc8560/Makefile
index da295fb..4d9c2e7 100644
--- a/board/sbc8560/Makefile
+++ b/board/sbc8560/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2004
+# (C) Copyright 2004-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# (C) Copyright 2004 Wind River Systems Inc <www.windriver.com>.
@@ -26,13 +26,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o
+COBJS := $(BOARD).o
SOBJS := init.o
#SOBJS :=
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -43,9 +47,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/sc520_cdp/Makefile b/board/sc520_cdp/Makefile
index ab06ebc..7555b4f 100644
--- a/board/sc520_cdp/Makefile
+++ b/board/sc520_cdp/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2002
# Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
#
@@ -23,12 +26,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := sc520_cdp.o flash.o
+COBJS := sc520_cdp.o flash.o
SOBJS := sc520_cdp_asm.o sc520_cdp_asm16.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
clean:
@@ -39,9 +46,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/sc520_spunk/Makefile b/board/sc520_spunk/Makefile
index 242d53c..9958e80 100644
--- a/board/sc520_spunk/Makefile
+++ b/board/sc520_spunk/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2002
# Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
#
@@ -23,12 +26,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := sc520_spunk.o flash.o
+COBJS := sc520_spunk.o flash.o
SOBJS := sc520_spunk_asm.o sc520_spunk_asm16.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -39,9 +46,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/scb9328/Makefile b/board/scb9328/Makefile
index 5dc3fd4..01b908e 100644
--- a/board/scb9328/Makefile
+++ b/board/scb9328/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := scb9328.o flash.o
+COBJS := scb9328.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/shannon/Makefile b/board/shannon/Makefile
index f66b096..a04d841 100644
--- a/board/shannon/Makefile
+++ b/board/shannon/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := shannon.o flash.o
+COBJS := shannon.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
clean:
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/siemens/CCM/Makefile b/board/siemens/CCM/Makefile
index ee2fc53..2ad4c83 100644
--- a/board/siemens/CCM/Makefile
+++ b/board/siemens/CCM/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,20 +22,28 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+$(shell mkdir -p $(obj)../../tqm8xx)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = ccm.o flash.o fpga_ccm.o ../common/fpga.o \
+COBJS = ccm.o flash.o fpga_ccm.o ../common/fpga.o \
../../tqm8xx/load_sernum_ethaddr.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/siemens/IAD210/Makefile b/board/siemens/IAD210/Makefile
index 87a6893..3964381 100644
--- a/board/siemens/IAD210/Makefile
+++ b/board/siemens/IAD210/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001, 2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o atm.o
+COBJS = $(BOARD).o flash.o atm.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/siemens/SCM/Makefile b/board/siemens/SCM/Makefile
index af646e4..b4bbb53 100644
--- a/board/siemens/SCM/Makefile
+++ b/board/siemens/SCM/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,21 +22,28 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+$(shell mkdir -p $(obj)../../tqm8xx/)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = scm.o flash.o fpga_scm.o ../common/fpga.o \
+COBJS = scm.o flash.o fpga_scm.o ../common/fpga.o \
../../tqm8xx/load_sernum_ethaddr.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): .depend $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/siemens/pcu_e/Makefile b/board/siemens/pcu_e/Makefile
index 7a2014d..1b57d2b 100644
--- a/board/siemens/pcu_e/Makefile
+++ b/board/siemens/pcu_e/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/sixnet/Makefile b/board/sixnet/Makefile
index 13ce9fc..e3d24b3 100644
--- a/board/sixnet/Makefile
+++ b/board/sixnet/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/sl8245/Makefile b/board/sl8245/Makefile
index 6d11240..43c27e9 100644
--- a/board/sl8245/Makefile
+++ b/board/sl8245/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001 - 2003
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/smdk2400/Makefile b/board/smdk2400/Makefile
index fc3d48f..b3cefcf 100644
--- a/board/smdk2400/Makefile
+++ b/board/smdk2400/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001, 2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := smdk2400.o flash.o
+COBJS := smdk2400.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
clean:
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/smdk2410/Makefile b/board/smdk2410/Makefile
index 4ee21f5..65f1a4d 100644
--- a/board/smdk2410/Makefile
+++ b/board/smdk2410/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001, 2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := smdk2410.o flash.o
+COBJS := smdk2410.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
clean:
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/snmc/qs850/Makefile b/board/snmc/qs850/Makefile
index e5d8446..e3d24b3 100644
--- a/board/snmc/qs850/Makefile
+++ b/board/snmc/qs850/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2003
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/snmc/qs860t/Makefile b/board/snmc/qs860t/Makefile
index 13ce9fc..e3d24b3 100644
--- a/board/snmc/qs860t/Makefile
+++ b/board/snmc/qs860t/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/sorcery/Makefile b/board/sorcery/Makefile
index 3d6d673..c59a3be 100644
--- a/board/sorcery/Makefile
+++ b/board/sorcery/Makefile
@@ -1,4 +1,5 @@
-# (C) Copyright 2005
+#
+# (C) Copyright 2005-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,11 +23,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := $(BOARD).o
-OBJS := $(BOARD).o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(OBJS) $(SOBJS)
+$(LIB): $(OBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -37,9 +42,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/sorcery/sorcery.c b/board/sorcery/sorcery.c
index 35d6a06..165e9e2 100644
--- a/board/sorcery/sorcery.c
+++ b/board/sorcery/sorcery.c
@@ -33,7 +33,7 @@ long int initdram (int board_type)
size = dramSetup ();
- return get_ram_size((ulong *)CFG_SDRAM_BASE, size);
+ return get_ram_size(CFG_SDRAM_BASE, size);
}
int checkboard (void)
diff --git a/board/spc1920/Makefile b/board/spc1920/Makefile
index 47afef7..2951b96 100644
--- a/board/spc1920/Makefile
+++ b/board/spc1920/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o
+COBJS = $(BOARD).o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/spd8xx/Makefile b/board/spd8xx/Makefile
index 13ce9fc..e3d24b3 100644
--- a/board/spd8xx/Makefile
+++ b/board/spd8xx/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/ssv/adnpesc1/Makefile b/board/ssv/adnpesc1/Makefile
index 9182a4e..77de4fb 100644
--- a/board/ssv/adnpesc1/Makefile
+++ b/board/ssv/adnpesc1/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001-2004
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,14 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o flash.o misc.o
+COBJS := $(BOARD).o flash.o misc.o
+SOBJS := vectors.o
-SOBJS = vectors.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -40,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/stamp/Makefile b/board/stamp/Makefile
index ab97e1b..8c20543 100644
--- a/board/stamp/Makefile
+++ b/board/stamp/Makefile
@@ -3,7 +3,7 @@
#
# Copyright (c) 2005 blackfin.uclinux.org
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -26,7 +26,7 @@
#
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -50,19 +50,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o stamp.o
-SOBJS =
+COBJS = $(BOARD).o stamp.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/stxgp3/Makefile b/board/stxgp3/Makefile
index d150df8..5477ff9 100644
--- a/board/stxgp3/Makefile
+++ b/board/stxgp3/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o flash.o
+COBJS := $(BOARD).o flash.o
SOBJS := init.o
#SOBJS :=
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -40,9 +44,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/stxxtc/Makefile b/board/stxxtc/Makefile
index 11065cf..807da06 100644
--- a/board/stxxtc/Makefile
+++ b/board/stxxtc/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,26 +23,30 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o oftree.o
+COBJS = $(BOARD).o oftree.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
-%.dtb: %.dts
+$(obj)%.dtb: $(src)%.dts
dtc -f -V 0x10 -I dts -O dtb $< >$@
-%.c: %.dtb
+$(obj)%.c: $(obj)%.dtb
xxd -i $< \
| sed -e "s/^unsigned char/const unsigned char/g" \
| sed -e "s/^unsigned int/const unsigned int/g" > $@
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/svm_sc8xx/Makefile b/board/svm_sc8xx/Makefile
index 13ce9fc..e3d24b3 100644
--- a/board/svm_sc8xx/Makefile
+++ b/board/svm_sc8xx/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/sx1/Makefile b/board/sx1/Makefile
index 8fbdf2a..4e6adac 100644
--- a/board/sx1/Makefile
+++ b/board/sx1/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2004
+# (C) Copyright 2004-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := sx1.o
+COBJS := sx1.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/tb0229/Makefile b/board/tb0229/Makefile
index 4375073..aefaf0d 100644
--- a/board/tb0229/Makefile
+++ b/board/tb0229/Makefile
@@ -1,7 +1,7 @@
#
# (C) Masami Komiya <mkomiya@sonare.it> 2004
#
-# (C) Copyright 2003-2004
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -25,19 +25,23 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o vr4131-pci.o
+COBJS = $(BOARD).o flash.o vr4131-pci.o
SOBJS = lowlevel_init.o
-$(LIB): .depend $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/total5200/Makefile b/board/total5200/Makefile
index 232956a..4245f98 100644
--- a/board/total5200/Makefile
+++ b/board/total5200/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2003-2004
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,11 +23,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o sdram.o
+COBJS := $(BOARD).o sdram.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -38,9 +42,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/total5200/config.mk b/board/total5200/config.mk
index 1a7a7cf..e7ac93d 100644
--- a/board/total5200/config.mk
+++ b/board/total5200/config.mk
@@ -31,7 +31,7 @@
# 0x00100000 boot from RAM (for testing only)
#
-sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
ifndef TEXT_BASE
## Standard: boot high
diff --git a/board/tqm5200/Makefile b/board/tqm5200/Makefile
index 9a1ea48..d0dde26 100644
--- a/board/tqm5200/Makefile
+++ b/board/tqm5200/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2003-2004
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,11 +23,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o cmd_stk52xx.o cmd_tb5200.o
+COBJS := $(BOARD).o cmd_stk52xx.o cmd_tb5200.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -38,9 +42,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/tqm5200/cmd_stk52xx.c b/board/tqm5200/cmd_stk52xx.c
index c37d4c6..7af69f2 100755
--- a/board/tqm5200/cmd_stk52xx.c
+++ b/board/tqm5200/cmd_stk52xx.c
@@ -30,8 +30,8 @@
#include <command.h>
#if (CONFIG_COMMANDS & CFG_CMD_BSP)
-#if defined (CONFIG_STK52XX)
+#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300)
#define DEFAULT_VOL 45
#define DEFAULT_FREQ 500
#define DEFAULT_DURATION 200
@@ -537,7 +537,9 @@ static int cmd_beep(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
return rcode;
}
+#endif
+#if defined(CONFIG_STK52XX)
void led_init(void)
{
struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO;
@@ -736,7 +738,9 @@ int do_led(char *argv[])
return 0;
}
+#endif
+#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300)
/*
* return 1 on CAN initialization failure
* return 0 if no failure
@@ -1106,6 +1110,7 @@ int do_rs232(char *argv[])
return error_status;
}
+#ifndef CONFIG_FO300
static void sm501_backlight (unsigned int state)
{
if (state == BL_ON) {
@@ -1115,6 +1120,7 @@ static void sm501_backlight (unsigned int state)
*(vu_long *)(SM501_MMIO_BASE+SM501_PANEL_DISPLAY_CONTROL) &=
~((1 << 26) | (1 << 27));
}
+#endif
int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
@@ -1124,7 +1130,9 @@ int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
printf ("Revision 100 of STK52XX not supported!\n");
return 1;
#endif
+#if defined(CONFIG_STK52XX)
led_init();
+#endif
can_init();
switch (argc) {
@@ -1152,6 +1160,7 @@ int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
else
printf ("Error\n");
return rcode;
+#ifndef CONFIG_FO300
} else if (strncmp (argv[1], "backlight", 4) == 0) {
if (strncmp (argv[2], "on", 2) == 0) {
sm501_backlight (BL_ON);
@@ -1161,14 +1170,17 @@ int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
sm501_backlight (BL_OFF);
return 0;
}
+#endif
}
break;
+#if defined(CONFIG_STK52XX)
case 4:
if (strcmp (argv[1], "led") == 0) {
return (do_led (argv));
}
break;
+#endif
default:
break;
@@ -1204,7 +1216,9 @@ U_BOOT_CMD(
"[channel]\n"
" - play short beep on \"l\"eft or \"r\"ight channel\n"
);
+#endif /* CONFIG_STK52XX || CONFIG_FO300 */
+#if defined(CONFIG_STK52XX)
U_BOOT_CMD(
fkt , 4, 1, cmd_fkt,
"fkt - Function test routines\n",
@@ -1217,5 +1231,14 @@ U_BOOT_CMD(
"fkt backlight on/off\n"
" - switch backlight on or off\n"
);
-#endif /* CONFIG_STK52XX */
+#elif defined(CONFIG_FO300)
+U_BOOT_CMD(
+ fkt , 3, 1, cmd_fkt,
+ "fkt - Function test routines\n",
+ "fkt can\n"
+ " - loopback plug for X16/X29 required\n"
+ "fkt rs232 number\n"
+ " - loopback plug(s) for X21/X22 required\n"
+);
+#endif
#endif /* CFG_CMD_BSP */
diff --git a/board/tqm5200/config.mk b/board/tqm5200/config.mk
index 84ddee8..d72dfe7 100644
--- a/board/tqm5200/config.mk
+++ b/board/tqm5200/config.mk
@@ -32,7 +32,7 @@
# 0x00100000 boot from RAM (for testing only)
#
-sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
ifndef TEXT_BASE
## Standard: boot low
diff --git a/board/tqm5200/tqm5200.c b/board/tqm5200/tqm5200.c
index d6f7737..b76579c 100644
--- a/board/tqm5200/tqm5200.c
+++ b/board/tqm5200/tqm5200.c
@@ -290,8 +290,10 @@ int checkboard (void)
# define CARRIER_NAME "TB5200"
#elif defined(CONFIG_CAM5200)
# define CARRIER_NAME "Cam5200"
+#elif defined(CONFIG_FO300)
+# define CARRIER_NAME "FO300"
#else
-# error "Unknown carrier board"
+# error "UNKNOWN"
#endif
puts ( "Board: " MODULE_NAME " (TQ-Components GmbH)\n"
@@ -444,6 +446,43 @@ int board_early_init_r (void)
#endif
#endif /* CONFIG_PS2MULT */
+#ifdef CONFIG_FO300
+int silent_boot (void)
+{
+ vu_long timer3_status;
+
+ /* Configure GPT3 as GPIO input */
+ *(vu_long *)MPC5XXX_GPT3_ENABLE = 0x00000004;
+
+ /* Read in TIMER_3 pin status */
+ timer3_status = *(vu_long *)MPC5XXX_GPT3_STATUS;
+
+#ifdef FO300_SILENT_CONSOLE_WHEN_S1_CLOSED
+ /* Force silent console mode if S1 switch
+ * is in closed position (TIMER_3 pin status is LOW). */
+ if (MPC5XXX_GPT_GPIO_PIN(timer3_status) == 0)
+ return 1;
+#else
+ /* Force silent console mode if S1 switch
+ * is in open position (TIMER_3 pin status is HIGH). */
+ if (MPC5XXX_GPT_GPIO_PIN(timer3_status) == 1)
+ return 1;
+#endif
+
+ return 0;
+}
+
+int board_early_init_f (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ if (silent_boot())
+ gd->flags |= GD_FLG_SILENT;
+
+ return 0;
+}
+#endif /* CONFIG_FO300 */
+
int last_stage_init (void)
{
/*
@@ -536,12 +575,23 @@ int last_stage_init (void)
__asm__ volatile ("sync");
}
+#ifdef CONFIG_FO300
+ if (silent_boot()) {
+ setenv("bootdelay", "0");
+ disable_ctrlc(1);
+ }
+#endif
+
return 0;
}
#ifdef CONFIG_VIDEO_SM501
+#ifdef CONFIG_FO300
+#define DISPLAY_WIDTH 800
+#else
#define DISPLAY_WIDTH 640
+#endif
#define DISPLAY_HEIGHT 480
#ifdef CONFIG_VIDEO_SM501_8BPP
@@ -571,6 +621,28 @@ static const SMI_REGS init_regs [] =
{0x80218, 0x000201e9},
{0x80200, 0x00013306},
#else /* panel + CRT */
+#ifdef CONFIG_FO300
+ {0x00004, 0x0},
+ {0x00048, 0x00021807},
+ {0x0004C, 0x301a0a01},
+ {0x00054, 0x1},
+ {0x00040, 0x00021807},
+ {0x00044, 0x091a0a01},
+ {0x00054, 0x0},
+ {0x80000, 0x0f013106},
+ {0x80004, 0xc428bb17},
+ {0x8000C, 0x00000000},
+ {0x80010, 0x0C800C80},
+ {0x80014, 0x03200000},
+ {0x80018, 0x01e00000},
+ {0x8001C, 0x00000000},
+ {0x80020, 0x01e00320},
+ {0x80024, 0x042a031f},
+ {0x80028, 0x0086034a},
+ {0x8002C, 0x020c01df},
+ {0x80030, 0x000201ea},
+ {0x80200, 0x00010000},
+#else
{0x00004, 0x0},
{0x00048, 0x00021807},
{0x0004C, 0x091a0a01},
@@ -591,6 +663,7 @@ static const SMI_REGS init_regs [] =
{0x8002C, 0x020c01df},
{0x80030, 0x000201e9},
{0x80200, 0x00010000},
+#endif /* #ifdef CONFIG_FO300 */
#endif
{0, 0}
};
@@ -604,7 +677,7 @@ void video_get_info_str (int line_number, char *info)
{
if (line_number == 1) {
strcpy (info, " Board: TQM5200 (TQ-Components GmbH)");
-#if defined (CONFIG_STK52XX) || defined (CONFIG_TB5200)
+#if defined (CONFIG_STK52XX) || defined (CONFIG_TB5200) || defined(CONFIG_FO300)
} else if (line_number == 2) {
#if defined (CONFIG_STK52XX)
strcpy (info, " on a STK52xx carrier board");
@@ -612,6 +685,9 @@ void video_get_info_str (int line_number, char *info)
#if defined (CONFIG_TB5200)
strcpy (info, " on a TB5200 carrier board");
#endif
+#if defined (CONFIG_FO300)
+ strcpy (info, " on a FO300 carrier board");
+#endif
#endif
}
else {
diff --git a/board/tqm8260/Makefile b/board/tqm8260/Makefile
index c10b9fe..d3adccd 100644
--- a/board/tqm8260/Makefile
+++ b/board/tqm8260/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,19 +22,26 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../tqm8xx/)
+endif
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o ../tqm8xx/load_sernum_ethaddr.o
+COBJS = $(BOARD).o flash.o ../tqm8xx/load_sernum_ethaddr.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/tqm834x/Makefile b/board/tqm834x/Makefile
index 3ecc7d0..6991cfb 100644
--- a/board/tqm834x/Makefile
+++ b/board/tqm834x/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# Copyright 2004 Freescale Semiconductor, Inc.
#
# See file CREDITS for list of people who contributed to this
@@ -22,11 +25,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o pci.o
+COBJS = $(BOARD).o pci.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -37,9 +44,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/tqm85xx/Makefile b/board/tqm85xx/Makefile
index 3933d46..a6ad98a 100644
--- a/board/tqm85xx/Makefile
+++ b/board/tqm85xx/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -12,7 +12,7 @@
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o sdram.o
+COBJS := $(BOARD).o sdram.o
SOBJS := init.o
#SOBJS :=
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -40,9 +44,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/tqm8xx/Makefile b/board/tqm8xx/Makefile
index 2ff9b4d..312c0c4 100644
--- a/board/tqm8xx/Makefile
+++ b/board/tqm8xx/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2003
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o load_sernum_ethaddr.o
+COBJS = $(BOARD).o flash.o load_sernum_ethaddr.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/trab/Makefile b/board/trab/Makefile
index 159404b..2b918f6 100644
--- a/board/trab/Makefile
+++ b/board/trab/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,43 +23,51 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := trab.o flash.o vfd.o cmd_trab.o memory.o tsc2000.o auto_update.o
+COBJS := trab.o flash.o vfd.o cmd_trab.o memory.o tsc2000.o auto_update.o
SOBJS := lowlevel_init.o
+COBJS_FKT := trab_fkt.o rs485.o tsc2000.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) $(COBJS_FKT:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+OBJS_FKT := $(addprefix $(obj),$(COBJS_FKT))
+
gcclibdir := $(shell dirname `$(CC) -print-libgcc-file-name`)
LOAD_ADDR = 0xc100000
#########################################################################
-all: $(LIB) trab_fkt.srec trab_fkt.bin
+all: $(LIB) $(obj)trab_fkt.srec $(obj)trab_fkt.bin
-$(LIB): $(OBJS) $(SOBJS)
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
-trab_fkt.srec: trab_fkt.o rs485.o tsc2000.o $(LIB)
- $(LD) -g -Ttext $(LOAD_ADDR) -o $(<:.o=) -e $(<:.o=) $^ $(LIB) \
- -L../../examples -lstubs \
- -L../../lib_generic -lgeneric \
+$(obj)trab_fkt.srec: $(OBJS_FKT) $(LIB)
+ $(LD) -g -Ttext $(LOAD_ADDR) -o $(<:.o=) -e trab_fkt $^ $(LIB) \
+ -L$(obj)../../examples -lstubs \
+ -L$(obj)../../lib_generic -lgeneric \
-L$(gcclibdir) -lgcc
$(OBJCOPY) -O srec $(<:.o=) $@
-trab_fkt.bin: trab_fkt.srec
+$(obj)trab_fkt.bin: $(obj)trab_fkt.srec
$(OBJCOPY) -I srec -O binary $< $@
clean:
- rm -f $(SOBJS) $(OBJS)
+ rm -f $(SOBJS) $(OBJS) $(OBJS_FKT)
distclean: clean
rm -f $(LIB) core *.bak .depend
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/trab/config.mk b/board/trab/config.mk
index f2411d0..800cc28 100644
--- a/board/trab/config.mk
+++ b/board/trab/config.mk
@@ -19,7 +19,7 @@
# download areas is 0C80'0000
#
-sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
ifndef TEXT_BASE
TEXT_BASE = 0x0DF40000
diff --git a/board/uc100/Makefile b/board/uc100/Makefile
index 2d2cc23..a7a93ab 100644
--- a/board/uc100/Makefile
+++ b/board/uc100/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2003
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,19 +23,23 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-#OBJS = $(BOARD).o flash.o pcmcia.o
-OBJS = $(BOARD).o pcmcia.o
+#COBJS = $(BOARD).o flash.o pcmcia.o
+COBJS = $(BOARD).o pcmcia.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/utx8245/Makefile b/board/utx8245/Makefile
index e698afc..0664d9f 100644
--- a/board/utx8245/Makefile
+++ b/board/utx8245/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# (C) Copyright 2002
@@ -28,20 +28,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-SOBJS =
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
-$(LIB): .depend $(OBJS) $(SOBJS)
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/v37/Makefile b/board/v37/Makefile
index 7a17067..b420269 100644
--- a/board/v37/Makefile
+++ b/board/v37/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2003
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/versatile/Makefile b/board/versatile/Makefile
index fbdc627..27bca10 100644
--- a/board/versatile/Makefile
+++ b/board/versatile/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := versatile.o flash.o
+COBJS := versatile.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/versatile/split_by_variant.sh b/board/versatile/split_by_variant.sh
index 576f238..25461c2 100755
--- a/board/versatile/split_by_variant.sh
+++ b/board/versatile/split_by_variant.sh
@@ -5,28 +5,30 @@
# ---------------------------------------------------------
# Set up the Versatile type define
# ---------------------------------------------------------
+
+mkdir -p ${obj}include
variant=PB926EJ-S
if [ "$1" == "" ]
then
echo "$0:: No parameters - using versatilepb_config"
- echo "#define CONFIG_ARCH_VERSATILE_PB" > ./include/config.h
+ echo "#define CONFIG_ARCH_VERSATILE_PB" > ${obj}include/config.h
variant=PB926EJ-S
else
case "$1" in
versatilepb_config | \
versatile_config)
- echo "#define CONFIG_ARCH_VERSATILE_PB" > ./include/config.h
+ echo "#define CONFIG_ARCH_VERSATILE_PB" > ${obj}include/config.h
;;
versatileab_config)
- echo "#define CONFIG_ARCH_VERSATILE_AB" > ./include/config.h
+ echo "#define CONFIG_ARCH_VERSATILE_AB" > ${obj}include/config.h
variant=AB926EJ-S
;;
*)
echo "$0:: Unrecognised config - using versatilepb_config"
- echo "#define CONFIG_ARCH_VERSATILE_PB" > ./include/config.h
+ echo "#define CONFIG_ARCH_VERSATILE_PB" > ${obj}include/config.h
variant=PB926EJ-S
;;
@@ -36,5 +38,5 @@ fi
# ---------------------------------------------------------
# Complete the configuration
# ---------------------------------------------------------
-./mkconfig -a versatile arm arm926ejs versatile NULL versatile
+$MKCONFIG -a versatile arm arm926ejs versatile NULL versatile
echo "Variant:: $variant"
diff --git a/board/voiceblue/Makefile b/board/voiceblue/Makefile
index 6302fa8..fa614f8 100644
--- a/board/voiceblue/Makefile
+++ b/board/voiceblue/Makefile
@@ -1,4 +1,4 @@
-# (C) Copyright 2000-2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de
#
# (C) Copyright 2005
@@ -24,43 +24,51 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := voiceblue.o
+COBJS := voiceblue.o
SOBJS := setup.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) eeprom.c eeprom_start.S
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
gcclibdir := $(shell dirname `$(CC) -print-libgcc-file-name`)
LOAD_ADDR = 0x10400000
LDSCRIPT = $(TOPDIR)/board/$(BOARDDIR)/eeprom.lds
+lnk = $(if $(obj),$(obj),.)
-all: $(LIB) eeprom.srec eeprom.bin
+all: $(obj).depend $(LIB) $(obj)eeprom.srec $(obj)eeprom.bin
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
-eeprom.srec: eeprom.o eeprom_start.o
- $(LD) -T $(LDSCRIPT) -g -Ttext $(LOAD_ADDR) \
- -o $(<:.o=) -e $(<:.o=) $^ \
- -L../../examples -lstubs \
- -L../../lib_generic -lgeneric \
+$(obj)eeprom.srec: $(obj)eeprom.o $(obj)eeprom_start.o
+ cd $(lnk) && $(LD) -T $(LDSCRIPT) -g -Ttext $(LOAD_ADDR) \
+ -o $(<:.o=) -e eeprom eeprom.o eeprom_start.o \
+ -L$(obj)../../examples -lstubs \
+ -L$(obj)../../lib_generic -lgeneric \
-L$(gcclibdir) -lgcc
$(OBJCOPY) -O srec $(<:.o=) $@
-eeprom.bin: eeprom.srec
+$(obj)eeprom.bin: $(obj)eeprom.srec
$(OBJCOPY) -I srec -O binary $< $@ 2>/dev/null
clean:
- rm -f $(SOBJS) $(OBJS) eeprom eeprom.srec eeprom.bin
+ rm -f $(SOBJS) $(OBJS) $(obj)eeprom \
+ $(obj)eeprom.srec $(obj)eeprom.bin \
+ $(obj)eeprom.o $(obj)eeprom_start.o
+
distclean: clean
rm -f $(LIB) core config.tmp *.bak .depend
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/voiceblue/config.mk b/board/voiceblue/config.mk
index b77c91c..d55daa4 100644
--- a/board/voiceblue/config.mk
+++ b/board/voiceblue/config.mk
@@ -3,7 +3,7 @@
# entry 1000'8000 (mem base + reserved)
#
-sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
ifeq ($(VOICEBLUE_SMALL_FLASH),y)
# We load ourself to internal SRAM at 2001'2000
diff --git a/board/w7o/Makefile b/board/w7o/Makefile
index d008f89..2ec449d 100644
--- a/board/w7o/Makefile
+++ b/board/w7o/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2001
# Erik Theisen, Wave 7 Optics, etheisen@mindspring.com.
#
@@ -23,12 +26,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o fpga.o fsboot.o post2.o vpd.o cmd_vpd.o \
+COBJS = $(BOARD).o flash.o fpga.o fsboot.o post2.o vpd.o cmd_vpd.o \
watchdog.o
SOBJS = init.o post1.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $^
@@ -40,9 +47,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/wepep250/Makefile b/board/wepep250/Makefile
index 11ad8fb..b5b5a96 100644
--- a/board/wepep250/Makefile
+++ b/board/wepep250/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := wepep250.o flash.o
+COBJS := wepep250.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
clean:
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/westel/amx860/Makefile b/board/westel/amx860/Makefile
index 7a2014d..1b57d2b 100644
--- a/board/westel/amx860/Makefile
+++ b/board/westel/amx860/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,18 +23,22 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/xaeniax/Makefile b/board/xaeniax/Makefile
index 7c5f0cd..655dc9a 100644
--- a/board/xaeniax/Makefile
+++ b/board/xaeniax/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := xaeniax.o flash.o
+COBJS := xaeniax.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
clean:
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/xilinx/ml300/Makefile b/board/xilinx/ml300/Makefile
index 880c494..4ecf37a 100644
--- a/board/xilinx/ml300/Makefile
+++ b/board/xilinx/ml300/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -19,14 +19,22 @@
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
+#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+$(shell mkdir -p $(obj)../xilinx_enet)
+$(shell mkdir -p $(obj)../xilinx_iic)
+endif
-CFLAGS += -I../ml300 -I../common -I../xilinx_enet -I../xilinx_iic
+INCS := -I../ml300 -I../common -I../xilinx_enet -I../xilinx_iic
+CFLAGS += $(INCS)
+HOST_CFLAGS += $(INCS)
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o \
+COBJS = $(BOARD).o \
serial.o \
../xilinx_enet/emac_adapter.o ../xilinx_enet/xemac.o \
../xilinx_enet/xemac_options.o ../xilinx_enet/xemac_polled.o \
@@ -39,6 +47,10 @@ OBJS = $(BOARD).o \
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $^
@@ -50,9 +62,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/xm250/Makefile b/board/xm250/Makefile
index 1b0a3f0..22f2024 100644
--- a/board/xm250/Makefile
+++ b/board/xm250/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,13 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := xm250.o flash.o
+COBJS := xm250.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/xpedite1k/Makefile b/board/xpedite1k/Makefile
index c5c0915..5f3e34e 100644
--- a/board/xpedite1k/Makefile
+++ b/board/xpedite1k/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2002-2004
+# (C) Copyright 2002-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o
-OBJS +=flash.o
+COBJS = $(BOARD).o flash.o
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
@@ -40,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/xsengine/Makefile b/board/xsengine/Makefile
index ed1464a..78ca9d6 100644
--- a/board/xsengine/Makefile
+++ b/board/xsengine/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := xsengine.o flash.o
+COBJS := xsengine.o flash.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
clean:
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/zpc1900/Makefile b/board/zpc1900/Makefile
index 8b10993..e880f87 100644
--- a/board/zpc1900/Makefile
+++ b/board/zpc1900/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,11 +23,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := $(BOARD).o
+COBJS := $(BOARD).o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -38,9 +42,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/zylonite/Makefile b/board/zylonite/Makefile
index f3ad674..4b70f70 100644
--- a/board/zylonite/Makefile
+++ b/board/zylonite/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -20,14 +20,19 @@
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
+
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS := zylonite.o nand.o
+COBJS := zylonite.o nand.o
SOBJS := lowlevel_init.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
clean:
@@ -38,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/zylonite/config.mk b/board/zylonite/config.mk
index b5d5955..09b0f71 100644
--- a/board/zylonite/config.mk
+++ b/board/zylonite/config.mk
@@ -2,5 +2,3 @@
#TEXT_BASE = 0xa1700000
#TEXT_BASE = 0xa3080000
TEXT_BASE = 0xa3008000
-
-BOARDLIBS = drivers/nand/libnand.a
diff --git a/common/Makefile b/common/Makefile
index 7e446ec..2eac66b 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2004
+# (C) Copyright 2004-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,7 +23,7 @@
include $(TOPDIR)/config.mk
-LIB = libcommon.a
+LIB = $(obj)libcommon.a
AOBJS =
@@ -53,28 +53,29 @@ COBJS = main.o ACEX1K.o altera.o bedbug.o circbuf.o \
usb.o usb_kbd.o usb_storage.o \
virtex2.o xilinx.o crc16.o xyzModem.o
-OBJS = $(AOBJS) $(COBJS)
+SRCS := $(AOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(AOBJS) $(COBJS))
CPPFLAGS += -I..
all: $(LIB) $(AOBJS)
-$(LIB): .depend $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
-environment.o: environment.c ../tools/envcrc
+$(obj)environment.o: $(src)environment.c $(obj)../tools/envcrc
$(CC) $(AFLAGS) -Wa,--no-warn \
- -DENV_CRC=$(shell ../tools/envcrc) \
- -c -o $@ environment.c
+ -DENV_CRC=$(shell $(obj)../tools/envcrc) \
+ -c -o $@ $(src)environment.c
-../tools/envcrc:
+$(obj)../tools/envcrc:
$(MAKE) -C ../tools
#########################################################################
-.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/common/altera.c b/common/altera.c
index 357d702..06e8a95 100644
--- a/common/altera.c
+++ b/common/altera.c
@@ -50,7 +50,7 @@ int altera_load( Altera_desc *desc, void *buf, size_t bsize )
{
int ret_val = FPGA_FAIL; /* assume a failure */
- if (!altera_validate (desc, __FUNCTION__)) {
+ if (!altera_validate (desc, (char *)__FUNCTION__)) {
printf ("%s: Invalid device descriptor\n", __FUNCTION__);
} else {
switch (desc->family) {
@@ -83,7 +83,7 @@ int altera_dump( Altera_desc *desc, void *buf, size_t bsize )
{
int ret_val = FPGA_FAIL; /* assume a failure */
- if (!altera_validate (desc, __FUNCTION__)) {
+ if (!altera_validate (desc, (char *)__FUNCTION__)) {
printf ("%s: Invalid device descriptor\n", __FUNCTION__);
} else {
switch (desc->family) {
@@ -111,7 +111,7 @@ int altera_info( Altera_desc *desc )
{
int ret_val = FPGA_FAIL;
- if (altera_validate (desc, __FUNCTION__)) {
+ if (altera_validate (desc, (char *)__FUNCTION__)) {
printf ("Family: \t");
switch (desc->family) {
case Altera_ACEX1K:
@@ -187,7 +187,7 @@ int altera_reloc( Altera_desc *desc, ulong reloc_offset)
{
int ret_val = FPGA_FAIL; /* assume a failure */
- if (!altera_validate (desc, __FUNCTION__)) {
+ if (!altera_validate (desc, (char *)__FUNCTION__)) {
printf ("%s: Invalid device descriptor\n", __FUNCTION__);
} else {
switch (desc->family) {
diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c
index 256e4bc..70de795 100644
--- a/common/cmd_bdinfo.c
+++ b/common/cmd_bdinfo.c
@@ -62,11 +62,13 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
defined(CONFIG_405EP) || defined(CONFIG_XILINX_ML300) || \
defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440SP)
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE)
print_str ("procfreq", strmhz(buf, bd->bi_procfreq));
print_str ("plb_busfreq", strmhz(buf, bd->bi_plb_busfreq));
#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || defined(CONFIG_XILINX_ML300) || \
- defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SPE)
+ defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
print_str ("pci_busfreq", strmhz(buf, bd->bi_pci_busfreq));
#endif
#else /* ! CONFIG_405GP, CONFIG_405CR, CONFIG_405EP, CONFIG_XILINX_ML300, CONFIG_440EP CONFIG_440GR */
diff --git a/common/cmd_jffs2.c b/common/cmd_jffs2.c
index 201c3c1..b5fd417 100644
--- a/common/cmd_jffs2.c
+++ b/common/cmd_jffs2.c
@@ -1268,7 +1268,7 @@ static void list_partitions(void)
part_num = 0;
list_for_each(pentry, &dev->parts) {
part = list_entry(pentry, struct part_info, link);
- printf(" %d: %-22s\t0x%08x\t0x%08x\t%d\n",
+ printf("%2d: %-20s0x%08x\t0x%08x\t%d\n",
part_num, part->name, part->size,
part->offset, part->mask_flags);
diff --git a/common/env_nand.c b/common/env_nand.c
index 0a05b09..67c4a4e 100644
--- a/common/env_nand.c
+++ b/common/env_nand.c
@@ -2,7 +2,7 @@
* (C) Copyright 2004
* Jian Zhang, Texas Instruments, jzhang@ti.com.
- * (C) Copyright 2000-2004
+ * (C) Copyright 2000-2006
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
@@ -76,7 +76,9 @@ env_t *env_ptr = 0;
/* local functions */
+#if !defined(ENV_IS_EMBEDDED)
static void use_default(void);
+#endif
DECLARE_GLOBAL_DATA_PTR;
@@ -91,11 +93,55 @@ uchar env_get_char_spec (int index)
* Mark it OK for now. env_relocate() in env_common.c
* will call our relocate function which will does
* the real validation.
+ *
+ * When using a NAND boot image (like sequoia_nand), the environment
+ * can be embedded or attached to the U-Boot image in NAND flash. This way
+ * the SPL loads not only the U-Boot image from NAND but also the
+ * environment.
*/
int env_init(void)
{
+#if defined(ENV_IS_EMBEDDED)
+ ulong total;
+ int crc1_ok = 0, crc2_ok = 0;
+ env_t *tmp_env1, *tmp_env2;
+
+ total = CFG_ENV_SIZE;
+
+ tmp_env1 = env_ptr;
+ tmp_env2 = (env_t *)((ulong)env_ptr + CFG_ENV_SIZE);
+
+ crc1_ok = (crc32(0, tmp_env1->data, ENV_SIZE) == tmp_env1->crc);
+ crc2_ok = (crc32(0, tmp_env2->data, ENV_SIZE) == tmp_env2->crc);
+
+ if (!crc1_ok && !crc2_ok)
+ gd->env_valid = 0;
+ else if(crc1_ok && !crc2_ok)
+ gd->env_valid = 1;
+ else if(!crc1_ok && crc2_ok)
+ gd->env_valid = 2;
+ else {
+ /* both ok - check serial */
+ if(tmp_env1->flags == 255 && tmp_env2->flags == 0)
+ gd->env_valid = 2;
+ else if(tmp_env2->flags == 255 && tmp_env1->flags == 0)
+ gd->env_valid = 1;
+ else if(tmp_env1->flags > tmp_env2->flags)
+ gd->env_valid = 1;
+ else if(tmp_env2->flags > tmp_env1->flags)
+ gd->env_valid = 2;
+ else /* flags are equal - almost impossible */
+ gd->env_valid = 1;
+ }
+
+ if (gd->env_valid == 1)
+ env_ptr = tmp_env1;
+ else if (gd->env_valid == 2)
+ env_ptr = tmp_env2;
+#else /* ENV_IS_EMBEDDED */
gd->env_addr = (ulong)&default_environment[0];
gd->env_valid = 1;
+#endif /* ENV_IS_EMBEDDED */
return (0);
}
@@ -236,6 +282,7 @@ void env_relocate_spec (void)
}
#endif /* CFG_ENV_OFFSET_REDUND */
+#if !defined(ENV_IS_EMBEDDED)
static void use_default()
{
puts ("*** Warning - bad CRC or NAND, using default environment\n\n");
@@ -253,5 +300,6 @@ static void use_default()
gd->env_valid = 1;
}
+#endif
#endif /* CFG_ENV_IS_IN_NAND */
diff --git a/common/environment.c b/common/environment.c
index 81471ce..19bdeb0 100644
--- a/common/environment.c
+++ b/common/environment.c
@@ -60,7 +60,8 @@
defined(CONFIG_RRVISION) || \
defined(CONFIG_TRAB) || \
defined(CONFIG_PPCHAMELEONEVB) || \
- defined(CONFIG_M5271EVB)) && \
+ defined(CONFIG_M5271EVB) || \
+ defined(CONFIG_NAND_U_BOOT)) && \
defined(ENV_CRC) /* Environment embedded in U-Boot .ppcenv section */
/* XXX - This only works with GNU C */
# define __PPCENV__ __attribute__ ((section(".ppcenv")))
diff --git a/common/exports.c b/common/exports.c
index ef25338..0cb4396 100644
--- a/common/exports.c
+++ b/common/exports.c
@@ -23,8 +23,11 @@ void jumptable_init (void)
gd->jt[XF_get_version] = (void *) get_version;
gd->jt[XF_malloc] = (void *) malloc;
gd->jt[XF_free] = (void *) free;
- gd->jt[XF_get_timer] = (void *)get_timer;
- gd->jt[XF_udelay] = (void *)udelay;
+ gd->jt[XF_getenv] = (void *) getenv;
+ gd->jt[XF_setenv] = (void *) setenv;
+ gd->jt[XF_get_timer] = (void *) get_timer;
+ gd->jt[XF_simple_strtoul] = (void *) simple_strtoul;
+ gd->jt[XF_udelay] = (void *) udelay;
#if defined(CONFIG_I386) || defined(CONFIG_PPC)
gd->jt[XF_install_hdlr] = (void *) irq_install_handler;
gd->jt[XF_free_hdlr] = (void *) irq_free_handler;
diff --git a/common/fpga.c b/common/fpga.c
index 02d3e42..2eff239 100644
--- a/common/fpga.c
+++ b/common/fpga.c
@@ -139,7 +139,7 @@ static int fpga_dev_info( int devnum )
printf( "Xilinx Device\nDescriptor @ 0x%p\n", desc );
ret_val = xilinx_info( desc->devdesc );
#else
- fpga_no_sup( __FUNCTION__, "Xilinx devices" );
+ fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" );
#endif
break;
case fpga_altera:
@@ -178,7 +178,7 @@ int fpga_reloc( fpga_type devtype, void *desc, ulong reloc_off )
#if CONFIG_FPGA & CFG_FPGA_XILINX
ret_val = xilinx_reloc( desc, reloc_off );
#else
- fpga_no_sup( __FUNCTION__, "Xilinx devices" );
+ fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" );
#endif
break;
case fpga_altera:
@@ -271,7 +271,7 @@ int fpga_load( int devnum, void *buf, size_t bsize )
#if CONFIG_FPGA & CFG_FPGA_XILINX
ret_val = xilinx_load( desc->devdesc, buf, bsize );
#else
- fpga_no_sup( __FUNCTION__, "Xilinx devices" );
+ fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" );
#endif
break;
case fpga_altera:
@@ -304,7 +304,7 @@ int fpga_dump( int devnum, void *buf, size_t bsize )
#if CONFIG_FPGA & CFG_FPGA_XILINX
ret_val = xilinx_dump( desc->devdesc, buf, bsize );
#else
- fpga_no_sup( __FUNCTION__, "Xilinx devices" );
+ fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" );
#endif
break;
case fpga_altera:
diff --git a/common/lcd.c b/common/lcd.c
index 0be1912..d79350f 100644
--- a/common/lcd.c
+++ b/common/lcd.c
@@ -585,6 +585,7 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y)
uchar *bmap;
ushort padded_line;
unsigned long width, height;
+ unsigned long pwidth = panel_info.vl_col;
unsigned colors,bpix;
unsigned long compression;
#if defined(CONFIG_PXA250)
@@ -628,6 +629,8 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y)
cmap = (ushort *)fbi->palette;
#elif defined(CONFIG_MPC823)
cmap = (ushort *)&(cp->lcd_cmap[255*sizeof(ushort)]);
+#elif defined(CONFIG_MCC200)
+ /* MCC200 LCD doesn't need CMAP, supports 1bpp b&w only */
#else
# error "Don't know location of color map"
#endif
@@ -652,9 +655,28 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y)
}
}
+ /*
+ * BMP format for Monochrome assumes that the state of a
+ * pixel is described on a per Bit basis, not per Byte.
+ * So, in case of Monochrome BMP we should align widths
+ * on a byte boundary and convert them from Bit to Byte
+ * units.
+ * Probably, PXA250 and MPC823 process 1bpp BMP images in
+ * their own ways, so make the converting to be MCC200
+ * specific.
+ */
+#if defined(CONFIG_MCC200)
+ if (bpix==1)
+ {
+ width = ((width + 7) & ~7) >> 3;
+ x = ((x + 7) & ~7) >> 3;
+ pwidth= ((pwidth + 7) & ~7) >> 3;
+ }
+#endif
+
padded_line = (width&0x3) ? ((width&~0x3)+4) : (width);
- if ((x + width)>panel_info.vl_col)
- width = panel_info.vl_col - x;
+ if ((x + width)>pwidth)
+ width = pwidth - x;
if ((y + height)>panel_info.vl_row)
height = panel_info.vl_row - y;
@@ -666,7 +688,7 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y)
for (j = 0; j < width ; j++)
#if defined(CONFIG_PXA250)
*(fb++)=*(bmap++);
-#elif defined(CONFIG_MPC823)
+#elif defined(CONFIG_MPC823) || defined(CONFIG_MCC200)
*(fb++)=255-*(bmap++);
#endif
bmap += (width - padded_line);
diff --git a/common/serial.c b/common/serial.c
index 38057d2..605d4e3 100644
--- a/common/serial.c
+++ b/common/serial.c
@@ -42,7 +42,19 @@ struct serial_device *default_serial_console (void)
return &serial_scc_device;
#elif defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) \
|| defined(CONFIG_405EP) || defined(CONFIG_MPC5xxx)
-#if defined(CONFIG_UART1_CONSOLE)
+#if defined(CONFIG_CONS_INDEX) && defined(CFG_NS16550_SERIAL)
+#if (CONFIG_CONS_INDEX==1)
+ return &eserial1_device;
+#elif (CONFIG_CONS_INDEX==2)
+ return &eserial2_device;
+#elif (CONFIG_CONS_INDEX==3)
+ return &eserial3_device;
+#elif (CONFIG_CONS_INDEX==4)
+ return &eserial4_device;
+#else
+#error "Bad CONFIG_CONS_INDEX."
+#endif
+#elif defined(CONFIG_UART1_CONSOLE)
return &serial1_device;
#else
return &serial0_device;
@@ -84,6 +96,20 @@ void serial_initialize (void)
serial_register(&serial1_device);
#endif
+#if defined(CFG_NS16550_SERIAL)
+#if defined(CFG_NS16550_COM1)
+ serial_register(&eserial1_device);
+#endif
+#if defined(CFG_NS16550_COM2)
+ serial_register(&eserial2_device);
+#endif
+#if defined(CFG_NS16550_COM3)
+ serial_register(&eserial3_device);
+#endif
+#if defined(CFG_NS16550_COM4)
+ serial_register(&eserial4_device);
+#endif
+#endif /* CFG_NS16550_SERIAL */
serial_assign (default_serial_console ()->name);
}
diff --git a/common/usb_storage.c b/common/usb_storage.c
index e64470c..69ecf18 100644
--- a/common/usb_storage.c
+++ b/common/usb_storage.c
@@ -916,6 +916,28 @@ static int usb_read_10(ccb *srb,struct us_data *ss, unsigned long start, unsigne
}
+#ifdef CONFIG_USB_BIN_FIXUP
+/*
+ * Some USB storage devices queried for SCSI identification data respond with
+ * binary strings, which if output to the console freeze the terminal. The
+ * workaround is to modify the vendor and product strings read from such
+ * device with proper values (as reported by 'usb info').
+ *
+ * Vendor and product length limits are taken from the definition of
+ * block_dev_desc_t in include/part.h.
+ */
+static void usb_bin_fixup(struct usb_device_descriptor descriptor,
+ unsigned char vendor[],
+ unsigned char product[]) {
+ const unsigned char max_vendor_len = 40;
+ const unsigned char max_product_len = 20;
+ if (descriptor.idVendor == 0x0424 && descriptor.idProduct == 0x223a) {
+ strncpy(vendor, "SMSC", max_vendor_len);
+ strncpy(product, "Flash Media Cntrller", max_product_len);
+ }
+}
+#endif /* CONFIG_USB_BIN_FIXUP */
+
#define USB_MAX_READ_BLK 20
unsigned long usb_stor_read(int device, unsigned long blknr, unsigned long blkcnt, unsigned long *buffer)
@@ -1171,6 +1193,9 @@ int usb_stor_get_info(struct usb_device *dev,struct us_data *ss,block_dev_desc_t
dev_desc->vendor[8] = 0;
dev_desc->product[16] = 0;
dev_desc->revision[4] = 0;
+#ifdef CONFIG_USB_BIN_FIXUP
+ usb_bin_fixup(dev->descriptor, dev_desc->vendor, dev_desc->product);
+#endif /* CONFIG_USB_BIN_FIXUP */
USB_STOR_PRINTF("ISO Vers %X, Response Data %X\n",usb_stor_buf[2],usb_stor_buf[3]);
if(usb_test_unit_ready(pccb,ss)) {
printf("Device NOT ready\n Request Sense returned %02X %02X %02X\n",pccb->sense_buf[2],pccb->sense_buf[12],pccb->sense_buf[13]);
diff --git a/common/xyzModem.c b/common/xyzModem.c
index d1d66e8..a209dfa 100644
--- a/common/xyzModem.c
+++ b/common/xyzModem.c
@@ -69,135 +69,157 @@
#define BSP 0x08
#define NAK 0x15
#define CAN 0x18
-#define EOF 0x1A /* ^Z for DOS officionados */
+#define EOF 0x1A /* ^Z for DOS officionados */
#define USE_YMODEM_LENGTH
/* Data & state local to the protocol */
-static struct {
+static struct
+{
#ifdef REDBOOT
- hal_virtual_comm_table_t* __chan;
+ hal_virtual_comm_table_t *__chan;
#else
- int *__chan;
+ int *__chan;
#endif
- unsigned char pkt[1024], *bufp;
- unsigned char blk,cblk,crc1,crc2;
- unsigned char next_blk; /* Expected block */
- int len, mode, total_retries;
- int total_SOH, total_STX, total_CAN;
- bool crc_mode, at_eof, tx_ack;
+ unsigned char pkt[1024], *bufp;
+ unsigned char blk, cblk, crc1, crc2;
+ unsigned char next_blk; /* Expected block */
+ int len, mode, total_retries;
+ int total_SOH, total_STX, total_CAN;
+ bool crc_mode, at_eof, tx_ack;
#ifdef USE_YMODEM_LENGTH
- unsigned long file_length, read_length;
+ unsigned long file_length, read_length;
#endif
} xyz;
-#define xyzModem_CHAR_TIMEOUT 2000 /* 2 seconds */
+#define xyzModem_CHAR_TIMEOUT 2000 /* 2 seconds */
#define xyzModem_MAX_RETRIES 20
#define xyzModem_MAX_RETRIES_WITH_CRC 10
-#define xyzModem_CAN_COUNT 3 /* Wait for 3 CAN before quitting */
+#define xyzModem_CAN_COUNT 3 /* Wait for 3 CAN before quitting */
-#ifndef REDBOOT /*SB */
+#ifndef REDBOOT /*SB */
typedef int cyg_int32;
-int CYGACC_COMM_IF_GETC_TIMEOUT (char chan,char *c) {
+int
+CYGACC_COMM_IF_GETC_TIMEOUT (char chan, char *c)
+{
#define DELAY 20
- unsigned long counter=0;
- while (!tstc() && (counter < xyzModem_CHAR_TIMEOUT*1000/DELAY)) {
- udelay(DELAY);
- counter++;
- }
- if (tstc()) {
- *c=getc();
- return 1;
- }
- return 0;
+ unsigned long counter = 0;
+ while (!tstc () && (counter < xyzModem_CHAR_TIMEOUT * 1000 / DELAY))
+ {
+ udelay (DELAY);
+ counter++;
+ }
+ if (tstc ())
+ {
+ *c = getc ();
+ return 1;
+ }
+ return 0;
}
-void CYGACC_COMM_IF_PUTC(char x,char y) {
- putc(y);
+void
+CYGACC_COMM_IF_PUTC (char x, char y)
+{
+ putc (y);
}
/* Validate a hex character */
__inline__ static bool
-_is_hex(char c)
+_is_hex (char c)
{
- return (((c >= '0') && (c <= '9')) ||
- ((c >= 'A') && (c <= 'F')) ||
- ((c >= 'a') && (c <= 'f')));
+ return (((c >= '0') && (c <= '9')) ||
+ ((c >= 'A') && (c <= 'F')) || ((c >= 'a') && (c <= 'f')));
}
/* Convert a single hex nibble */
__inline__ static int
-_from_hex(char c)
+_from_hex (char c)
{
- int ret = 0;
-
- if ((c >= '0') && (c <= '9')) {
- ret = (c - '0');
- } else if ((c >= 'a') && (c <= 'f')) {
- ret = (c - 'a' + 0x0a);
- } else if ((c >= 'A') && (c <= 'F')) {
- ret = (c - 'A' + 0x0A);
+ int ret = 0;
+
+ if ((c >= '0') && (c <= '9'))
+ {
+ ret = (c - '0');
+ }
+ else if ((c >= 'a') && (c <= 'f'))
+ {
+ ret = (c - 'a' + 0x0a);
}
- return ret;
+ else if ((c >= 'A') && (c <= 'F'))
+ {
+ ret = (c - 'A' + 0x0A);
+ }
+ return ret;
}
/* Convert a character to lower case */
__inline__ static char
-_tolower(char c)
+_tolower (char c)
{
- if ((c >= 'A') && (c <= 'Z')) {
- c = (c - 'A') + 'a';
+ if ((c >= 'A') && (c <= 'Z'))
+ {
+ c = (c - 'A') + 'a';
}
- return c;
+ return c;
}
/* Parse (scan) a number */
bool
-parse_num(char *s, unsigned long *val, char **es, char *delim)
+parse_num (char *s, unsigned long *val, char **es, char *delim)
{
- bool first = true;
- int radix = 10;
- char c;
- unsigned long result = 0;
- int digit;
-
- while (*s == ' ') s++;
- while (*s) {
- if (first && (s[0] == '0') && (_tolower(s[1]) == 'x')) {
- radix = 16;
- s += 2;
- }
- first = false;
- c = *s++;
- if (_is_hex(c) && ((digit = _from_hex(c)) < radix)) {
- /* Valid digit */
+ bool first = true;
+ int radix = 10;
+ char c;
+ unsigned long result = 0;
+ int digit;
+
+ while (*s == ' ')
+ s++;
+ while (*s)
+ {
+ if (first && (s[0] == '0') && (_tolower (s[1]) == 'x'))
+ {
+ radix = 16;
+ s += 2;
+ }
+ first = false;
+ c = *s++;
+ if (_is_hex (c) && ((digit = _from_hex (c)) < radix))
+ {
+ /* Valid digit */
#ifdef CYGPKG_HAL_MIPS
- /* FIXME: tx49 compiler generates 0x2539018 for MUL which */
- /* isn't any good. */
- if (16 == radix)
- result = result << 4;
- else
- result = 10 * result;
- result += digit;
+ /* FIXME: tx49 compiler generates 0x2539018 for MUL which */
+ /* isn't any good. */
+ if (16 == radix)
+ result = result << 4;
+ else
+ result = 10 * result;
+ result += digit;
#else
- result = (result * radix) + digit;
+ result = (result * radix) + digit;
#endif
- } else {
- if (delim != (char *)0) {
- /* See if this character is one of the delimiters */
- char *dp = delim;
- while (*dp && (c != *dp)) dp++;
- if (*dp) break; /* Found a good delimiter */
- }
- return false; /* Malformatted number */
- }
+ }
+ else
+ {
+ if (delim != (char *) 0)
+ {
+ /* See if this character is one of the delimiters */
+ char *dp = delim;
+ while (*dp && (c != *dp))
+ dp++;
+ if (*dp)
+ break; /* Found a good delimiter */
+ }
+ return false; /* Malformatted number */
+ }
}
- *val = result;
- if (es != (char **)0) {
- *es = s;
+ *val = result;
+ if (es != (char **) 0)
+ {
+ *es = s;
}
- return true;
+ return true;
}
#endif
@@ -211,24 +233,26 @@ parse_num(char *s, unsigned long *val, char **es, char *delim)
* messages.
*/
static int
-zm_dprintf(char *fmt, ...)
+zm_dprintf (char *fmt, ...)
{
- int cur_console;
- va_list args;
+ int cur_console;
+ va_list args;
- va_start(args, fmt);
+ va_start (args, fmt);
#ifdef REDBOOT
- cur_console = CYGACC_CALL_IF_SET_CONSOLE_COMM(CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT);
- CYGACC_CALL_IF_SET_CONSOLE_COMM(1);
+ cur_console =
+ CYGACC_CALL_IF_SET_CONSOLE_COMM
+ (CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT);
+ CYGACC_CALL_IF_SET_CONSOLE_COMM (1);
#endif
- diag_vprintf(fmt, args);
+ diag_vprintf (fmt, args);
#ifdef REDBOOT
- CYGACC_CALL_IF_SET_CONSOLE_COMM(cur_console);
+ CYGACC_CALL_IF_SET_CONSOLE_COMM (cur_console);
#endif
}
static void
-zm_flush(void)
+zm_flush (void)
{
}
@@ -238,42 +262,43 @@ zm_flush(void)
*/
#define FINAL
#ifdef FINAL
-static char *zm_out = (char *)0x00380000;
-static char *zm_out_start = (char *)0x00380000;
+static char *zm_out = (char *) 0x00380000;
+static char *zm_out_start = (char *) 0x00380000;
#else
static char zm_buf[8192];
-static char *zm_out=zm_buf;
+static char *zm_out = zm_buf;
static char *zm_out_start = zm_buf;
#endif
static int
-zm_dprintf(char *fmt, ...)
+zm_dprintf (char *fmt, ...)
{
- int len;
- va_list args;
+ int len;
+ va_list args;
- va_start(args, fmt);
- len = diag_vsprintf(zm_out, fmt, args);
- zm_out += len;
- return len;
+ va_start (args, fmt);
+ len = diag_vsprintf (zm_out, fmt, args);
+ zm_out += len;
+ return len;
}
static void
-zm_flush(void)
+zm_flush (void)
{
#ifdef REDBOOT
- char *p = zm_out_start;
- while (*p) mon_write_char(*p++);
+ char *p = zm_out_start;
+ while (*p)
+ mon_write_char (*p++);
#endif
- zm_out = zm_out_start;
+ zm_out = zm_out_start;
}
#endif
static void
-zm_dump_buf(void *buf, int len)
+zm_dump_buf (void *buf, int len)
{
#ifdef REDBOOT
- diag_vdump_buf_with_offset(zm_dprintf, buf, len, 0);
+ diag_vdump_buf_with_offset (zm_dprintf, buf, len, 0);
#else
#endif
@@ -283,22 +308,22 @@ static unsigned char zm_buf[2048];
static unsigned char *zm_bp;
static void
-zm_new(void)
+zm_new (void)
{
- zm_bp = zm_buf;
+ zm_bp = zm_buf;
}
static void
-zm_save(unsigned char c)
+zm_save (unsigned char c)
{
- *zm_bp++ = c;
+ *zm_bp++ = c;
}
static void
-zm_dump(int line)
+zm_dump (int line)
{
- zm_dprintf("Packet at line: %d\n", line);
- zm_dump_buf(zm_buf, zm_bp-zm_buf);
+ zm_dprintf ("Packet at line: %d\n", line);
+ zm_dump_buf (zm_buf, zm_bp - zm_buf);
}
#define ZM_DEBUG(x) x
@@ -308,439 +333,517 @@ zm_dump(int line)
/* Wait for the line to go idle */
static void
-xyzModem_flush(void)
+xyzModem_flush (void)
{
- int res;
- char c;
- while (true) {
- res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &c);
- if (!res) return;
+ int res;
+ char c;
+ while (true)
+ {
+ res = CYGACC_COMM_IF_GETC_TIMEOUT (*xyz.__chan, &c);
+ if (!res)
+ return;
}
}
static int
-xyzModem_get_hdr(void)
+xyzModem_get_hdr (void)
{
- char c;
- int res;
- bool hdr_found = false;
- int i, can_total, hdr_chars;
- unsigned short cksum;
-
- ZM_DEBUG(zm_new());
- /* Find the start of a header */
- can_total = 0;
- hdr_chars = 0;
-
- if (xyz.tx_ack) {
- CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK);
- xyz.tx_ack = false;
+ char c;
+ int res;
+ bool hdr_found = false;
+ int i, can_total, hdr_chars;
+ unsigned short cksum;
+
+ ZM_DEBUG (zm_new ());
+ /* Find the start of a header */
+ can_total = 0;
+ hdr_chars = 0;
+
+ if (xyz.tx_ack)
+ {
+ CYGACC_COMM_IF_PUTC (*xyz.__chan, ACK);
+ xyz.tx_ack = false;
}
- while (!hdr_found) {
- res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &c);
- ZM_DEBUG(zm_save(c));
- if (res) {
- hdr_chars++;
- switch (c) {
- case SOH:
- xyz.total_SOH++;
- case STX:
- if (c == STX) xyz.total_STX++;
- hdr_found = true;
- break;
- case CAN:
- xyz.total_CAN++;
- ZM_DEBUG(zm_dump(__LINE__));
- if (++can_total == xyzModem_CAN_COUNT) {
- return xyzModem_cancel;
- } else {
- /* Wait for multiple CAN to avoid early quits */
- break;
- }
- case EOT:
- /* EOT only supported if no noise */
- if (hdr_chars == 1) {
- CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK);
- ZM_DEBUG(zm_dprintf("ACK on EOT #%d\n", __LINE__));
- ZM_DEBUG(zm_dump(__LINE__));
- return xyzModem_eof;
- }
- default:
- /* Ignore, waiting for start of header */
- ;
- }
- } else {
- /* Data stream timed out */
- xyzModem_flush(); /* Toss any current input */
- ZM_DEBUG(zm_dump(__LINE__));
- CYGACC_CALL_IF_DELAY_US((cyg_int32)250000);
- return xyzModem_timeout;
- }
+ while (!hdr_found)
+ {
+ res = CYGACC_COMM_IF_GETC_TIMEOUT (*xyz.__chan, &c);
+ ZM_DEBUG (zm_save (c));
+ if (res)
+ {
+ hdr_chars++;
+ switch (c)
+ {
+ case SOH:
+ xyz.total_SOH++;
+ case STX:
+ if (c == STX)
+ xyz.total_STX++;
+ hdr_found = true;
+ break;
+ case CAN:
+ xyz.total_CAN++;
+ ZM_DEBUG (zm_dump (__LINE__));
+ if (++can_total == xyzModem_CAN_COUNT)
+ {
+ return xyzModem_cancel;
+ }
+ else
+ {
+ /* Wait for multiple CAN to avoid early quits */
+ break;
+ }
+ case EOT:
+ /* EOT only supported if no noise */
+ if (hdr_chars == 1)
+ {
+ CYGACC_COMM_IF_PUTC (*xyz.__chan, ACK);
+ ZM_DEBUG (zm_dprintf ("ACK on EOT #%d\n", __LINE__));
+ ZM_DEBUG (zm_dump (__LINE__));
+ return xyzModem_eof;
+ }
+ default:
+ /* Ignore, waiting for start of header */
+ ;
+ }
+ }
+ else
+ {
+ /* Data stream timed out */
+ xyzModem_flush (); /* Toss any current input */
+ ZM_DEBUG (zm_dump (__LINE__));
+ CYGACC_CALL_IF_DELAY_US ((cyg_int32) 250000);
+ return xyzModem_timeout;
+ }
}
- /* Header found, now read the data */
- res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, (char *)&xyz.blk);
- ZM_DEBUG(zm_save(xyz.blk));
- if (!res) {
- ZM_DEBUG(zm_dump(__LINE__));
- return xyzModem_timeout;
+ /* Header found, now read the data */
+ res = CYGACC_COMM_IF_GETC_TIMEOUT (*xyz.__chan, (char *) &xyz.blk);
+ ZM_DEBUG (zm_save (xyz.blk));
+ if (!res)
+ {
+ ZM_DEBUG (zm_dump (__LINE__));
+ return xyzModem_timeout;
}
- res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, (char *)&xyz.cblk);
- ZM_DEBUG(zm_save(xyz.cblk));
- if (!res) {
- ZM_DEBUG(zm_dump(__LINE__));
- return xyzModem_timeout;
+ res = CYGACC_COMM_IF_GETC_TIMEOUT (*xyz.__chan, (char *) &xyz.cblk);
+ ZM_DEBUG (zm_save (xyz.cblk));
+ if (!res)
+ {
+ ZM_DEBUG (zm_dump (__LINE__));
+ return xyzModem_timeout;
}
- xyz.len = (c == SOH) ? 128 : 1024;
- xyz.bufp = xyz.pkt;
- for (i = 0; i < xyz.len; i++) {
- res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &c);
- ZM_DEBUG(zm_save(c));
- if (res) {
- xyz.pkt[i] = c;
- } else {
- ZM_DEBUG(zm_dump(__LINE__));
- return xyzModem_timeout;
- }
+ xyz.len = (c == SOH) ? 128 : 1024;
+ xyz.bufp = xyz.pkt;
+ for (i = 0; i < xyz.len; i++)
+ {
+ res = CYGACC_COMM_IF_GETC_TIMEOUT (*xyz.__chan, &c);
+ ZM_DEBUG (zm_save (c));
+ if (res)
+ {
+ xyz.pkt[i] = c;
+ }
+ else
+ {
+ ZM_DEBUG (zm_dump (__LINE__));
+ return xyzModem_timeout;
+ }
}
- res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, (char *)&xyz.crc1);
- ZM_DEBUG(zm_save(xyz.crc1));
- if (!res) {
- ZM_DEBUG(zm_dump(__LINE__));
- return xyzModem_timeout;
+ res = CYGACC_COMM_IF_GETC_TIMEOUT (*xyz.__chan, (char *) &xyz.crc1);
+ ZM_DEBUG (zm_save (xyz.crc1));
+ if (!res)
+ {
+ ZM_DEBUG (zm_dump (__LINE__));
+ return xyzModem_timeout;
}
- if (xyz.crc_mode) {
- res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, (char *)&xyz.crc2);
- ZM_DEBUG(zm_save(xyz.crc2));
- if (!res) {
- ZM_DEBUG(zm_dump(__LINE__));
- return xyzModem_timeout;
- }
+ if (xyz.crc_mode)
+ {
+ res = CYGACC_COMM_IF_GETC_TIMEOUT (*xyz.__chan, (char *) &xyz.crc2);
+ ZM_DEBUG (zm_save (xyz.crc2));
+ if (!res)
+ {
+ ZM_DEBUG (zm_dump (__LINE__));
+ return xyzModem_timeout;
+ }
}
- ZM_DEBUG(zm_dump(__LINE__));
- /* Validate the message */
- if ((xyz.blk ^ xyz.cblk) != (unsigned char)0xFF) {
- ZM_DEBUG(zm_dprintf("Framing error - blk: %x/%x/%x\n", xyz.blk, xyz.cblk, (xyz.blk ^ xyz.cblk)));
- ZM_DEBUG(zm_dump_buf(xyz.pkt, xyz.len));
- xyzModem_flush();
- return xyzModem_frame;
+ ZM_DEBUG (zm_dump (__LINE__));
+ /* Validate the message */
+ if ((xyz.blk ^ xyz.cblk) != (unsigned char) 0xFF)
+ {
+ ZM_DEBUG (zm_dprintf
+ ("Framing error - blk: %x/%x/%x\n", xyz.blk, xyz.cblk,
+ (xyz.blk ^ xyz.cblk)));
+ ZM_DEBUG (zm_dump_buf (xyz.pkt, xyz.len));
+ xyzModem_flush ();
+ return xyzModem_frame;
}
- /* Verify checksum/CRC */
- if (xyz.crc_mode) {
- cksum = cyg_crc16(xyz.pkt, xyz.len);
- if (cksum != ((xyz.crc1 << 8) | xyz.crc2)) {
- ZM_DEBUG(zm_dprintf("CRC error - recvd: %02x%02x, computed: %x\n",
- xyz.crc1, xyz.crc2, cksum & 0xFFFF));
- return xyzModem_cksum;
- }
- } else {
- cksum = 0;
- for (i = 0; i < xyz.len; i++) {
- cksum += xyz.pkt[i];
- }
- if (xyz.crc1 != (cksum & 0xFF)) {
- ZM_DEBUG(zm_dprintf("Checksum error - recvd: %x, computed: %x\n", xyz.crc1, cksum & 0xFF));
- return xyzModem_cksum;
- }
+ /* Verify checksum/CRC */
+ if (xyz.crc_mode)
+ {
+ cksum = cyg_crc16 (xyz.pkt, xyz.len);
+ if (cksum != ((xyz.crc1 << 8) | xyz.crc2))
+ {
+ ZM_DEBUG (zm_dprintf ("CRC error - recvd: %02x%02x, computed: %x\n",
+ xyz.crc1, xyz.crc2, cksum & 0xFFFF));
+ return xyzModem_cksum;
+ }
}
- /* If we get here, the message passes [structural] muster */
- return 0;
+ else
+ {
+ cksum = 0;
+ for (i = 0; i < xyz.len; i++)
+ {
+ cksum += xyz.pkt[i];
+ }
+ if (xyz.crc1 != (cksum & 0xFF))
+ {
+ ZM_DEBUG (zm_dprintf
+ ("Checksum error - recvd: %x, computed: %x\n", xyz.crc1,
+ cksum & 0xFF));
+ return xyzModem_cksum;
+ }
+ }
+ /* If we get here, the message passes [structural] muster */
+ return 0;
}
int
-xyzModem_stream_open(connection_info_t *info, int *err)
+xyzModem_stream_open (connection_info_t * info, int *err)
{
#ifdef REDBOOT
- int console_chan;
+ int console_chan;
#endif
- int stat = 0;
- int retries = xyzModem_MAX_RETRIES;
- int crc_retries = xyzModem_MAX_RETRIES_WITH_CRC;
+ int stat = 0;
+ int retries = xyzModem_MAX_RETRIES;
+ int crc_retries = xyzModem_MAX_RETRIES_WITH_CRC;
/* ZM_DEBUG(zm_out = zm_out_start); */
#ifdef xyzModem_zmodem
- if (info->mode == xyzModem_zmodem) {
- *err = xyzModem_noZmodem;
- return -1;
+ if (info->mode == xyzModem_zmodem)
+ {
+ *err = xyzModem_noZmodem;
+ return -1;
}
#endif
#ifdef REDBOOT
- /* Set up the I/O channel. Note: this allows for using a different port in the future */
- console_chan = CYGACC_CALL_IF_SET_CONSOLE_COMM(CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT);
- if (info->chan >= 0) {
- CYGACC_CALL_IF_SET_CONSOLE_COMM(info->chan);
- } else {
- CYGACC_CALL_IF_SET_CONSOLE_COMM(console_chan);
+ /* Set up the I/O channel. Note: this allows for using a different port in the future */
+ console_chan =
+ CYGACC_CALL_IF_SET_CONSOLE_COMM
+ (CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT);
+ if (info->chan >= 0)
+ {
+ CYGACC_CALL_IF_SET_CONSOLE_COMM (info->chan);
}
- xyz.__chan = CYGACC_CALL_IF_CONSOLE_PROCS();
+ else
+ {
+ CYGACC_CALL_IF_SET_CONSOLE_COMM (console_chan);
+ }
+ xyz.__chan = CYGACC_CALL_IF_CONSOLE_PROCS ();
- CYGACC_CALL_IF_SET_CONSOLE_COMM(console_chan);
- CYGACC_COMM_IF_CONTROL(*xyz.__chan, __COMMCTL_SET_TIMEOUT, xyzModem_CHAR_TIMEOUT);
+ CYGACC_CALL_IF_SET_CONSOLE_COMM (console_chan);
+ CYGACC_COMM_IF_CONTROL (*xyz.__chan, __COMMCTL_SET_TIMEOUT,
+ xyzModem_CHAR_TIMEOUT);
#else
/* TODO: CHECK ! */
- int dummy;
- xyz.__chan=&dummy;
+ int dummy;
+ xyz.__chan = &dummy;
#endif
- xyz.len = 0;
- xyz.crc_mode = true;
- xyz.at_eof = false;
- xyz.tx_ack = false;
- xyz.mode = info->mode;
- xyz.total_retries = 0;
- xyz.total_SOH = 0;
- xyz.total_STX = 0;
- xyz.total_CAN = 0;
+ xyz.len = 0;
+ xyz.crc_mode = true;
+ xyz.at_eof = false;
+ xyz.tx_ack = false;
+ xyz.mode = info->mode;
+ xyz.total_retries = 0;
+ xyz.total_SOH = 0;
+ xyz.total_STX = 0;
+ xyz.total_CAN = 0;
#ifdef USE_YMODEM_LENGTH
- xyz.read_length = 0;
- xyz.file_length = 0;
+ xyz.read_length = 0;
+ xyz.file_length = 0;
#endif
- CYGACC_COMM_IF_PUTC(*xyz.__chan, (xyz.crc_mode ? 'C' : NAK));
+ CYGACC_COMM_IF_PUTC (*xyz.__chan, (xyz.crc_mode ? 'C' : NAK));
- if (xyz.mode == xyzModem_xmodem) {
- /* X-modem doesn't have an information header - exit here */
- xyz.next_blk = 1;
- return 0;
+ if (xyz.mode == xyzModem_xmodem)
+ {
+ /* X-modem doesn't have an information header - exit here */
+ xyz.next_blk = 1;
+ return 0;
}
- while (retries-- > 0) {
- stat = xyzModem_get_hdr();
- if (stat == 0) {
- /* Y-modem file information header */
- if (xyz.blk == 0) {
+ while (retries-- > 0)
+ {
+ stat = xyzModem_get_hdr ();
+ if (stat == 0)
+ {
+ /* Y-modem file information header */
+ if (xyz.blk == 0)
+ {
#ifdef USE_YMODEM_LENGTH
- /* skip filename */
- while (*xyz.bufp++);
- /* get the length */
- parse_num((char *)xyz.bufp, &xyz.file_length, NULL, " ");
+ /* skip filename */
+ while (*xyz.bufp++);
+ /* get the length */
+ parse_num ((char *) xyz.bufp, &xyz.file_length, NULL, " ");
#endif
- /* The rest of the file name data block quietly discarded */
- xyz.tx_ack = true;
- }
- xyz.next_blk = 1;
- xyz.len = 0;
- return 0;
- } else
- if (stat == xyzModem_timeout) {
- if (--crc_retries <= 0) xyz.crc_mode = false;
- CYGACC_CALL_IF_DELAY_US(5*100000); /* Extra delay for startup */
- CYGACC_COMM_IF_PUTC(*xyz.__chan, (xyz.crc_mode ? 'C' : NAK));
- xyz.total_retries++;
- ZM_DEBUG(zm_dprintf("NAK (%d)\n", __LINE__));
- }
- if (stat == xyzModem_cancel) {
- break;
- }
+ /* The rest of the file name data block quietly discarded */
+ xyz.tx_ack = true;
+ }
+ xyz.next_blk = 1;
+ xyz.len = 0;
+ return 0;
+ }
+ else if (stat == xyzModem_timeout)
+ {
+ if (--crc_retries <= 0)
+ xyz.crc_mode = false;
+ CYGACC_CALL_IF_DELAY_US (5 * 100000); /* Extra delay for startup */
+ CYGACC_COMM_IF_PUTC (*xyz.__chan, (xyz.crc_mode ? 'C' : NAK));
+ xyz.total_retries++;
+ ZM_DEBUG (zm_dprintf ("NAK (%d)\n", __LINE__));
+ }
+ if (stat == xyzModem_cancel)
+ {
+ break;
+ }
}
- *err = stat;
- ZM_DEBUG(zm_flush());
- return -1;
+ *err = stat;
+ ZM_DEBUG (zm_flush ());
+ return -1;
}
int
-xyzModem_stream_read(char *buf, int size, int *err)
+xyzModem_stream_read (char *buf, int size, int *err)
{
- int stat, total, len;
- int retries;
-
- total = 0;
- stat = xyzModem_cancel;
- /* Try and get 'size' bytes into the buffer */
- while (!xyz.at_eof && (size > 0)) {
- if (xyz.len == 0) {
- retries = xyzModem_MAX_RETRIES;
- while (retries-- > 0) {
- stat = xyzModem_get_hdr();
- if (stat == 0) {
- if (xyz.blk == xyz.next_blk) {
- xyz.tx_ack = true;
- ZM_DEBUG(zm_dprintf("ACK block %d (%d)\n", xyz.blk, __LINE__));
- xyz.next_blk = (xyz.next_blk + 1) & 0xFF;
+ int stat, total, len;
+ int retries;
+
+ total = 0;
+ stat = xyzModem_cancel;
+ /* Try and get 'size' bytes into the buffer */
+ while (!xyz.at_eof && (size > 0))
+ {
+ if (xyz.len == 0)
+ {
+ retries = xyzModem_MAX_RETRIES;
+ while (retries-- > 0)
+ {
+ stat = xyzModem_get_hdr ();
+ if (stat == 0)
+ {
+ if (xyz.blk == xyz.next_blk)
+ {
+ xyz.tx_ack = true;
+ ZM_DEBUG (zm_dprintf
+ ("ACK block %d (%d)\n", xyz.blk, __LINE__));
+ xyz.next_blk = (xyz.next_blk + 1) & 0xFF;
#if defined(xyzModem_zmodem) || defined(USE_YMODEM_LENGTH)
- if (xyz.mode == xyzModem_xmodem || xyz.file_length == 0) {
+ if (xyz.mode == xyzModem_xmodem || xyz.file_length == 0)
+ {
#else
- if (1) {
+ if (1)
+ {
#endif
- /* Data blocks can be padded with ^Z (EOF) characters */
- /* This code tries to detect and remove them */
- if ((xyz.bufp[xyz.len-1] == EOF) &&
- (xyz.bufp[xyz.len-2] == EOF) &&
- (xyz.bufp[xyz.len-3] == EOF)) {
- while (xyz.len && (xyz.bufp[xyz.len-1] == EOF)) {
- xyz.len--;
- }
- }
- }
+ /* Data blocks can be padded with ^Z (EOF) characters */
+ /* This code tries to detect and remove them */
+ if ((xyz.bufp[xyz.len - 1] == EOF) &&
+ (xyz.bufp[xyz.len - 2] == EOF) &&
+ (xyz.bufp[xyz.len - 3] == EOF))
+ {
+ while (xyz.len
+ && (xyz.bufp[xyz.len - 1] == EOF))
+ {
+ xyz.len--;
+ }
+ }
+ }
#ifdef USE_YMODEM_LENGTH
- /*
- * See if accumulated length exceeds that of the file.
- * If so, reduce size (i.e., cut out pad bytes)
- * Only do this for Y-modem (and Z-modem should it ever
- * be supported since it can fall back to Y-modem mode).
- */
- if (xyz.mode != xyzModem_xmodem && 0 != xyz.file_length) {
- xyz.read_length += xyz.len;
- if (xyz.read_length > xyz.file_length) {
- xyz.len -= (xyz.read_length - xyz.file_length);
- }
- }
+ /*
+ * See if accumulated length exceeds that of the file.
+ * If so, reduce size (i.e., cut out pad bytes)
+ * Only do this for Y-modem (and Z-modem should it ever
+ * be supported since it can fall back to Y-modem mode).
+ */
+ if (xyz.mode != xyzModem_xmodem && 0 != xyz.file_length)
+ {
+ xyz.read_length += xyz.len;
+ if (xyz.read_length > xyz.file_length)
+ {
+ xyz.len -= (xyz.read_length - xyz.file_length);
+ }
+ }
#endif
- break;
- } else if (xyz.blk == ((xyz.next_blk - 1) & 0xFF)) {
- /* Just re-ACK this so sender will get on with it */
- CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK);
- continue; /* Need new header */
- } else {
- stat = xyzModem_sequence;
- }
- }
- if (stat == xyzModem_cancel) {
- break;
- }
- if (stat == xyzModem_eof) {
- CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK);
- ZM_DEBUG(zm_dprintf("ACK (%d)\n", __LINE__));
- if (xyz.mode == xyzModem_ymodem) {
- CYGACC_COMM_IF_PUTC(*xyz.__chan, (xyz.crc_mode ? 'C' : NAK));
- xyz.total_retries++;
- ZM_DEBUG(zm_dprintf("Reading Final Header\n"));
- stat = xyzModem_get_hdr();
- CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK);
- ZM_DEBUG(zm_dprintf("FINAL ACK (%d)\n", __LINE__));
- }
- xyz.at_eof = true;
- break;
- }
- CYGACC_COMM_IF_PUTC(*xyz.__chan, (xyz.crc_mode ? 'C' : NAK));
- xyz.total_retries++;
- ZM_DEBUG(zm_dprintf("NAK (%d)\n", __LINE__));
- }
- if (stat < 0) {
- *err = stat;
- xyz.len = -1;
- return total;
- }
- }
- /* Don't "read" data from the EOF protocol package */
- if (!xyz.at_eof) {
- len = xyz.len;
- if (size < len) len = size;
- memcpy(buf, xyz.bufp, len);
- size -= len;
- buf += len;
- total += len;
- xyz.len -= len;
- xyz.bufp += len;
- }
+ break;
+ }
+ else if (xyz.blk == ((xyz.next_blk - 1) & 0xFF))
+ {
+ /* Just re-ACK this so sender will get on with it */
+ CYGACC_COMM_IF_PUTC (*xyz.__chan, ACK);
+ continue; /* Need new header */
+ }
+ else
+ {
+ stat = xyzModem_sequence;
+ }
+ }
+ if (stat == xyzModem_cancel)
+ {
+ break;
+ }
+ if (stat == xyzModem_eof)
+ {
+ CYGACC_COMM_IF_PUTC (*xyz.__chan, ACK);
+ ZM_DEBUG (zm_dprintf ("ACK (%d)\n", __LINE__));
+ if (xyz.mode == xyzModem_ymodem)
+ {
+ CYGACC_COMM_IF_PUTC (*xyz.__chan,
+ (xyz.crc_mode ? 'C' : NAK));
+ xyz.total_retries++;
+ ZM_DEBUG (zm_dprintf ("Reading Final Header\n"));
+ stat = xyzModem_get_hdr ();
+ CYGACC_COMM_IF_PUTC (*xyz.__chan, ACK);
+ ZM_DEBUG (zm_dprintf ("FINAL ACK (%d)\n", __LINE__));
+ }
+ xyz.at_eof = true;
+ break;
+ }
+ CYGACC_COMM_IF_PUTC (*xyz.__chan, (xyz.crc_mode ? 'C' : NAK));
+ xyz.total_retries++;
+ ZM_DEBUG (zm_dprintf ("NAK (%d)\n", __LINE__));
+ }
+ if (stat < 0)
+ {
+ *err = stat;
+ xyz.len = -1;
+ return total;
+ }
+ }
+ /* Don't "read" data from the EOF protocol package */
+ if (!xyz.at_eof)
+ {
+ len = xyz.len;
+ if (size < len)
+ len = size;
+ memcpy (buf, xyz.bufp, len);
+ size -= len;
+ buf += len;
+ total += len;
+ xyz.len -= len;
+ xyz.bufp += len;
+ }
}
- return total;
+ return total;
}
void
-xyzModem_stream_close(int *err)
+xyzModem_stream_close (int *err)
{
- diag_printf("xyzModem - %s mode, %d(SOH)/%d(STX)/%d(CAN) packets, %d retries\n",
- xyz.crc_mode ? "CRC" : "Cksum",
- xyz.total_SOH, xyz.total_STX, xyz.total_CAN,
- xyz.total_retries);
- ZM_DEBUG(zm_flush());
+ diag_printf
+ ("xyzModem - %s mode, %d(SOH)/%d(STX)/%d(CAN) packets, %d retries\n",
+ xyz.crc_mode ? "CRC" : "Cksum", xyz.total_SOH, xyz.total_STX,
+ xyz.total_CAN, xyz.total_retries);
+ ZM_DEBUG (zm_flush ());
}
/* Need to be able to clean out the input buffer, so have to take the */
/* getc */
-void xyzModem_stream_terminate(bool abort, int (*getc)(void))
+void
+xyzModem_stream_terminate (bool abort, int (*getc) (void))
{
int c;
- if (abort) {
- ZM_DEBUG(zm_dprintf("!!!! TRANSFER ABORT !!!!\n"));
- switch (xyz.mode) {
+ if (abort)
+ {
+ ZM_DEBUG (zm_dprintf ("!!!! TRANSFER ABORT !!!!\n"));
+ switch (xyz.mode)
+ {
case xyzModem_xmodem:
case xyzModem_ymodem:
/* The X/YMODEM Spec seems to suggest that multiple CAN followed by an equal */
/* number of Backspaces is a friendly way to get the other end to abort. */
- CYGACC_COMM_IF_PUTC(*xyz.__chan,CAN);
- CYGACC_COMM_IF_PUTC(*xyz.__chan,CAN);
- CYGACC_COMM_IF_PUTC(*xyz.__chan,CAN);
- CYGACC_COMM_IF_PUTC(*xyz.__chan,CAN);
- CYGACC_COMM_IF_PUTC(*xyz.__chan,BSP);
- CYGACC_COMM_IF_PUTC(*xyz.__chan,BSP);
- CYGACC_COMM_IF_PUTC(*xyz.__chan,BSP);
- CYGACC_COMM_IF_PUTC(*xyz.__chan,BSP);
+ CYGACC_COMM_IF_PUTC (*xyz.__chan, CAN);
+ CYGACC_COMM_IF_PUTC (*xyz.__chan, CAN);
+ CYGACC_COMM_IF_PUTC (*xyz.__chan, CAN);
+ CYGACC_COMM_IF_PUTC (*xyz.__chan, CAN);
+ CYGACC_COMM_IF_PUTC (*xyz.__chan, BSP);
+ CYGACC_COMM_IF_PUTC (*xyz.__chan, BSP);
+ CYGACC_COMM_IF_PUTC (*xyz.__chan, BSP);
+ CYGACC_COMM_IF_PUTC (*xyz.__chan, BSP);
/* Now consume the rest of what's waiting on the line. */
- ZM_DEBUG(zm_dprintf("Flushing serial line.\n"));
- xyzModem_flush();
- xyz.at_eof = true;
- break;
+ ZM_DEBUG (zm_dprintf ("Flushing serial line.\n"));
+ xyzModem_flush ();
+ xyz.at_eof = true;
+ break;
#ifdef xyzModem_zmodem
case xyzModem_zmodem:
/* Might support it some day I suppose. */
#endif
- break;
- }
- } else {
- ZM_DEBUG(zm_dprintf("Engaging cleanup mode...\n"));
+ break;
+ }
+ }
+ else
+ {
+ ZM_DEBUG (zm_dprintf ("Engaging cleanup mode...\n"));
/*
* Consume any trailing crap left in the inbuffer from
* previous recieved blocks. Since very few files are an exact multiple
* of the transfer block size, there will almost always be some gunk here.
* If we don't eat it now, RedBoot will think the user typed it.
*/
- ZM_DEBUG(zm_dprintf("Trailing gunk:\n"));
- while ((c = (*getc)()) > -1) ;
- ZM_DEBUG(zm_dprintf("\n"));
+ ZM_DEBUG (zm_dprintf ("Trailing gunk:\n"));
+ while ((c = (*getc) ()) > -1);
+ ZM_DEBUG (zm_dprintf ("\n"));
/*
* Make a small delay to give terminal programs like minicom
* time to get control again after their file transfer program
* exits.
*/
- CYGACC_CALL_IF_DELAY_US((cyg_int32)250000);
- }
+ CYGACC_CALL_IF_DELAY_US ((cyg_int32) 250000);
+ }
}
char *
-xyzModem_error(int err)
+xyzModem_error (int err)
{
- switch (err) {
+ switch (err)
+ {
case xyzModem_access:
- return "Can't access file";
- break;
+ return "Can't access file";
+ break;
case xyzModem_noZmodem:
- return "Sorry, zModem not available yet";
- break;
+ return "Sorry, zModem not available yet";
+ break;
case xyzModem_timeout:
- return "Timed out";
- break;
+ return "Timed out";
+ break;
case xyzModem_eof:
- return "End of file";
- break;
+ return "End of file";
+ break;
case xyzModem_cancel:
- return "Cancelled";
- break;
+ return "Cancelled";
+ break;
case xyzModem_frame:
- return "Invalid framing";
- break;
+ return "Invalid framing";
+ break;
case xyzModem_cksum:
- return "CRC/checksum error";
- break;
+ return "CRC/checksum error";
+ break;
case xyzModem_sequence:
- return "Block sequence error";
- break;
+ return "Block sequence error";
+ break;
default:
- return "Unknown error";
- break;
+ return "Unknown error";
+ break;
}
}
/*
* RedBoot interface
*/
-#if 0 /* SB */
-GETC_IO_FUNCS(xyzModem_io, xyzModem_stream_open, xyzModem_stream_close,
- xyzModem_stream_terminate, xyzModem_stream_read, xyzModem_error);
-RedBoot_load(xmodem, xyzModem_io, false, false, xyzModem_xmodem);
-RedBoot_load(ymodem, xyzModem_io, false, false, xyzModem_ymodem);
+#if 0 /* SB */
+GETC_IO_FUNCS (xyzModem_io, xyzModem_stream_open, xyzModem_stream_close,
+ xyzModem_stream_terminate, xyzModem_stream_read,
+ xyzModem_error);
+RedBoot_load (xmodem, xyzModem_io, false, false, xyzModem_xmodem);
+RedBoot_load (ymodem, xyzModem_io, false, false, xyzModem_ymodem);
#endif
diff --git a/config.mk b/config.mk
index b59667a..0f5d0f4 100644
--- a/config.mk
+++ b/config.mk
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,6 +23,22 @@
#########################################################################
+ifneq ($(OBJTREE),$(SRCTREE))
+ifeq ($(CURDIR),$(SRCTREE))
+dir :=
+else
+dir := $(subst $(SRCTREE)/,,$(CURDIR))
+endif
+
+obj := $(if $(dir),$(OBJTREE)/$(dir)/,$(OBJTREE)/)
+src := $(if $(dir),$(SRCTREE)/$(dir)/,$(SRCTREE)/)
+
+$(shell mkdir -p $(obj))
+else
+obj :=
+src :=
+endif
+
# clean the slate ...
PLATFORM_RELFLAGS =
PLATFORM_CPPFLAGS =
@@ -116,17 +132,26 @@ DBGFLAGS= -g # -DDEBUG
OPTFLAGS= -Os #-fomit-frame-pointer
ifndef LDSCRIPT
#LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds.debug
+ifeq ($(CONFIG_NAND_U_BOOT),y)
+LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds
+else
LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds
endif
+endif
OBJCFLAGS += --gap-fill=0xff
gccincdir := $(shell $(CC) -print-file-name=include)
CPPFLAGS := $(DBGFLAGS) $(OPTFLAGS) $(RELFLAGS) \
-D__KERNEL__ -DTEXT_BASE=$(TEXT_BASE) \
- -I$(TOPDIR)/include \
- -fno-builtin -ffreestanding -nostdinc -isystem \
- $(gccincdir) -pipe $(PLATFORM_CPPFLAGS)
+
+ifneq ($(OBJTREE),$(SRCTREE))
+CPPFLAGS += -I$(OBJTREE)/include2 -I$(OBJTREE)/include
+endif
+
+CPPFLAGS += -I$(TOPDIR)/include
+CPPFLAGS += -fno-builtin -ffreestanding -nostdinc \
+ -isystem $(gccincdir) -pipe $(PLATFORM_CPPFLAGS)
ifdef BUILD_TAG
CFLAGS := $(CPPFLAGS) -Wall -Wstrict-prototypes \
@@ -192,11 +217,23 @@ export TEXT_BASE PLATFORM_CPPFLAGS PLATFORM_RELFLAGS CPPFLAGS CFLAGS AFLAGS
#########################################################################
+ifndef REMOTE_BUILD
+
%.s: %.S
- $(CPP) $(AFLAGS) -o $@ $(CURDIR)/$<
+ $(CPP) $(AFLAGS) -o $@ $<
%.o: %.S
- $(CC) $(AFLAGS) -c -o $@ $(CURDIR)/$<
+ $(CC) $(AFLAGS) -c -o $@ $<
%.o: %.c
$(CC) $(CFLAGS) -c -o $@ $<
+else
+
+$(obj)%.s: %.S
+ $(CPP) $(AFLAGS) -o $@ $<
+$(obj)%.o: %.S
+ $(CC) $(AFLAGS) -c -o $@ $<
+$(obj)%.o: %.c
+ $(CC) $(CFLAGS) -c -o $@ $<
+endif
+
#########################################################################
diff --git a/cpu/74xx_7xx/Makefile b/cpu/74xx_7xx/Makefile
index 0e10d3a..e82fffc 100644
--- a/cpu/74xx_7xx/Makefile
+++ b/cpu/74xx_7xx/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2001
# Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
#
@@ -23,22 +26,26 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o
-ASOBJS = cache.o kgdb.o io.o
-OBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o
+SOBJS = cache.o kgdb.o io.o
+COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o
+
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
-all: .depend $(START) $(ASOBJS) $(LIB)
+all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) crv $@ $(ASOBJS) $(OBJS)
+ $(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(ASOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/arm1136/Makefile b/cpu/arm1136/Makefile
index 203278e..5d2c7eb 100644
--- a/cpu/arm1136/Makefile
+++ b/cpu/arm1136/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2003
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,21 +23,25 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o
-OBJS = interrupts.o cpu.o
+COBJS = interrupts.o cpu.o
-all: .depend $(START) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/arm720t/Makefile b/cpu/arm720t/Makefile
index f273d92..539a48c 100644
--- a/cpu/arm720t/Makefile
+++ b/cpu/arm720t/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,21 +23,25 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o
-OBJS = serial.o serial_netarm.o interrupts.o cpu.o
+COBJS = serial.o serial_netarm.o interrupts.o cpu.o
-all: .depend $(START) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/arm920t/Makefile b/cpu/arm920t/Makefile
index 8f256e9..199fe0c 100644
--- a/cpu/arm920t/Makefile
+++ b/cpu/arm920t/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001, 2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,21 +23,25 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o
-OBJS = cpu.o interrupts.o
+COBJS = cpu.o interrupts.o
-all: .depend $(START) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/arm920t/at91rm9200/Makefile b/cpu/arm920t/at91rm9200/Makefile
index aec9cb6..26b0b94 100644
--- a/cpu/arm920t/at91rm9200/Makefile
+++ b/cpu/arm920t/at91rm9200/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2005
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,22 +23,25 @@
include $(TOPDIR)/config.mk
-LIB = lib$(SOC).a
+LIB = $(obj)lib$(SOC).a
-OBJS = bcm5221.o dm9161.o ether.o i2c.o interrupts.o \
+COBJS = bcm5221.o dm9161.o ether.o i2c.o interrupts.o \
lxt972.o serial.o usb_ohci.o
SOBJS = lowlevel_init.o
-all: .depend $(LIB)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/arm920t/imx/Makefile b/cpu/arm920t/imx/Makefile
index 8865f82..e238fc0 100644
--- a/cpu/arm920t/imx/Makefile
+++ b/cpu/arm920t/imx/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001, 2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,20 +23,23 @@
include $(TOPDIR)/config.mk
-LIB = lib$(SOC).a
+LIB = $(obj)lib$(SOC).a
-OBJS = generic.o interrupts.o serial.o speed.o
+COBJS = generic.o interrupts.o serial.o speed.o
-all: .depend $(LIB)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+
+all: $(obj).depend $(LIB)
$(LIB): $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/arm920t/ks8695/Makefile b/cpu/arm920t/ks8695/Makefile
index ac49060..6342435 100644
--- a/cpu/arm920t/ks8695/Makefile
+++ b/cpu/arm920t/ks8695/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2005
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,21 +23,24 @@
include $(TOPDIR)/config.mk
-LIB = lib$(SOC).a
+LIB = $(obj)lib$(SOC).a
-OBJS = interrupts.o serial.o
+COBJS = interrupts.o serial.o
SOBJS = lowlevel_init.o
-all: .depend $(LIB)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/arm920t/s3c24x0/Makefile b/cpu/arm920t/s3c24x0/Makefile
index af9e4ef..557298e 100644
--- a/cpu/arm920t/s3c24x0/Makefile
+++ b/cpu/arm920t/s3c24x0/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001, 2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,21 +23,24 @@
include $(TOPDIR)/config.mk
-LIB = lib$(SOC).a
+LIB = $(obj)lib$(SOC).a
-OBJS = i2c.o interrupts.o serial.o speed.o \
+COBJS = i2c.o interrupts.o serial.o speed.o \
usb_ohci.o
-all: .depend $(LIB)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+
+all: $(obj).depend $(LIB)
$(LIB): $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/arm925t/Makefile b/cpu/arm925t/Makefile
index a1db818..086b1a3 100644
--- a/cpu/arm925t/Makefile
+++ b/cpu/arm925t/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2003
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,21 +23,25 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o
-OBJS = interrupts.o cpu.o omap925.o
+COBJS = interrupts.o cpu.o omap925.o
-all: .depend $(START) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/arm926ejs/Makefile b/cpu/arm926ejs/Makefile
index 060fd20..a410c2f 100644
--- a/cpu/arm926ejs/Makefile
+++ b/cpu/arm926ejs/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2003
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,21 +23,25 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o
-OBJS = interrupts.o cpu.o cpuinfo.o
+COBJS = interrupts.o cpu.o cpuinfo.o
-all: .depend $(START) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/arm926ejs/omap/Makefile b/cpu/arm926ejs/omap/Makefile
index f9d3378..7eca2f0 100644
--- a/cpu/arm926ejs/omap/Makefile
+++ b/cpu/arm926ejs/omap/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2005
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,21 +23,25 @@
include $(TOPDIR)/config.mk
-LIB = lib$(SOC).a
+LIB = $(obj)lib$(SOC).a
-OBJS = timer.o
+COBJS = timer.o
SOBJS = reset.o
-all: .depend $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
+START := $(addprefix $(obj),$(START))
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/arm926ejs/versatile/Makefile b/cpu/arm926ejs/versatile/Makefile
index f9d3378..7eca2f0 100644
--- a/cpu/arm926ejs/versatile/Makefile
+++ b/cpu/arm926ejs/versatile/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2005
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,21 +23,25 @@
include $(TOPDIR)/config.mk
-LIB = lib$(SOC).a
+LIB = $(obj)lib$(SOC).a
-OBJS = timer.o
+COBJS = timer.o
SOBJS = reset.o
-all: .depend $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
+START := $(addprefix $(obj),$(START))
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/arm946es/Makefile b/cpu/arm946es/Makefile
index 203278e..5d2c7eb 100644
--- a/cpu/arm946es/Makefile
+++ b/cpu/arm946es/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2003
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,21 +23,25 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o
-OBJS = interrupts.o cpu.o
+COBJS = interrupts.o cpu.o
-all: .depend $(START) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/arm_intcm/Makefile b/cpu/arm_intcm/Makefile
index 203278e..5d2c7eb 100644
--- a/cpu/arm_intcm/Makefile
+++ b/cpu/arm_intcm/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2003
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,21 +23,25 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o
-OBJS = interrupts.o cpu.o
+COBJS = interrupts.o cpu.o
-all: .depend $(START) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/bf533/Makefile b/cpu/bf533/Makefile
index c63a8f6..a5c48dc 100644
--- a/cpu/bf533/Makefile
+++ b/cpu/bf533/Makefile
@@ -2,7 +2,7 @@
#
# Copyright (c) 2005 blackfin.uclinux.org
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -26,21 +26,25 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o start1.o interrupt.o cache.o cplbhdlr.o cplbmgr.o flush.o
-OBJS = cpu.o traps.o ints.o serial.o interrupts.o
+COBJS = cpu.o traps.o ints.o serial.o interrupts.o
-all: .depend $(START) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/i386/Makefile b/cpu/i386/Makefile
index c44412a..cd46dea 100644
--- a/cpu/i386/Makefile
+++ b/cpu/i386/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2002
# Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
#
@@ -23,22 +26,26 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o start16.o reset.o
COBJS = serial.o interrupts.o cpu.o timer.o sc520.o
-AOBJS = sc520_asm.o
+SOBJS = sc520_asm.o
-all: .depend $(START) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
-$(LIB): $(COBJS) $(AOBJS)
- $(AR) crv $@ $(COBJS) $(AOBJS)
+all: $(obj).depend $(START) $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(COBJS:.o=.c) $(AOBJS:.o=.S)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(COBJS:.o=.c) $(AOBJS:.o=.S) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/i386/sc520.c b/cpu/i386/sc520.c
index c83f0bb..d0a7341 100644
--- a/cpu/i386/sc520.c
+++ b/cpu/i386/sc520.c
@@ -31,7 +31,9 @@
#include <common.h>
#include <config.h>
#include <pci.h>
+#ifdef CONFIG_SC520_SSI
#include <ssi.h>
+#endif
#include <asm/io.h>
#include <asm/pci.h>
#include <asm/ic/sc520.h>
@@ -143,7 +145,15 @@ unsigned long init_sc520_dram(void)
u32 dram_present=0;
u32 dram_ctrl;
-
+#ifdef CFG_SDRAM_DRCTMCTL
+ /* these memory control registers are set up in the assember part,
+ * in sc520_asm.S, during 'mem_init'. If we muck with them here,
+ * after we are running a stack in RAM, we have troubles. Besides,
+ * these refresh and delay values are better ? simply specified
+ * outright in the include/configs/{cfg} file since the HW designer
+ * simply dictates it.
+ */
+#else
int val;
int cas_precharge_delay = CFG_SDRAM_PRECHARGE_DELAY;
@@ -162,6 +172,7 @@ unsigned long init_sc520_dram(void)
} else {
val = 3; /* 62.4us */
}
+
write_mmcr_byte(SC520_DRCCTL, (read_mmcr_byte(SC520_DRCCTL) & 0xcf) | (val<<4));
val = read_mmcr_byte(SC520_DRCTMCTL);
@@ -181,13 +192,12 @@ unsigned long init_sc520_dram(void)
val |= 1;
}
write_mmcr_byte(SC520_DRCTMCTL, val);
-
+#endif
/* We read-back the configuration of the dram
* controller that the assembly code wrote */
dram_ctrl = read_mmcr_long(SC520_DRCBENDADR);
-
bd->bi_dram[0].start = 0;
if (dram_ctrl & 0x80) {
/* bank 0 enabled */
@@ -274,7 +284,7 @@ int pci_sc520_set_irq(int pci_pin, int irq)
{
int i;
-# if 0
+# if 1
printf("set_irq(): map INT%c to IRQ%d\n", pci_pin + 'A', irq);
#endif
if (irq < 0 || irq > 15) {
diff --git a/cpu/i386/sc520_asm.S b/cpu/i386/sc520_asm.S
index 80464fa..8fc713d 100644
--- a/cpu/i386/sc520_asm.S
+++ b/cpu/i386/sc520_asm.S
@@ -113,6 +113,7 @@
.equ DRCCFG, 0x0fffef014 /* DRAM bank configuration register */
.equ DRCBENDADR, 0x0fffef018 /* DRAM bank ending address register */
.equ ECCCTL, 0x0fffef020 /* DRAM ECC control register */
+.equ ECCINT, 0x0fffefd18 /* DRAM ECC nmi-INT mapping */
.equ DBCTL, 0x0fffef040 /* DRAM buffer control register */
.equ CACHELINESZ, 0x00000010 /* size of our cache line (read buffer) */
@@ -459,6 +460,12 @@ emptybank:
incl %edi
loop cleanuplp
+#if defined CFG_SDRAM_DRCTMCTL
+ /* just have your hardware desinger _GIVE_ you what you need here! */
+ movl $DRCTMCTL, %edi
+ movb $CFG_SDRAM_DRCTMCTL,%al
+ movb (%edi), %al
+#else
#if defined(CFG_SDRAM_CAS_LATENCY_2T) || defined(CFG_SDRAM_CAS_LATENCY_3T)
/* set the CAS latency now since it is hard to do
* when we run from the RAM */
@@ -472,6 +479,7 @@ emptybank:
#endif
movb %al, (%edi)
#endif
+#endif
movl $DRCCTL, %edi /* DRAM Control register */
movb $0x3,%al /* Load mode register cmd */
movb %al, (%edi)
@@ -528,9 +536,49 @@ bank0: movl (%edi), %eax
shll $22, %eax
movl %eax, %ebx
-done: movl %ebx, %eax
+done:
+ movl %ebx, %eax
+
+#if CFG_SDRAM_ECC_ENABLE
+ /* A nominal memory test: just a byte at each address line */
+ movl %eax, %ecx
+ shrl $0x1, %ecx
+ movl $0x1, %edi
+memtest0:
+ movb $0xa5, (%edi)
+ cmpb $0xa5, (%edi)
+ jne out
+ shrl $1, %ecx
+ andl %ecx,%ecx
+ jz set_ecc
+ shll $1, %edi
+ jmp memtest0
+
+set_ecc:
+ /* clear all ram with a memset */
+ movl %eax, %ecx
+ xorl %esi, %esi
+ xorl %edi, %edi
+ xorl %eax, %eax
+ shrl $2, %ecx
+ cld
+ rep stosl
+ /* enable read, write buffers */
+ movb $0x11, %al
+ movl $DBCTL, %edi
+ movb %al, (%edi)
+ /* enable NMI mapping for ECC */
+ movl $ECCINT, %edi
+ mov $0x10, %al
+ movb %al, (%edi)
+ /* Turn on ECC */
+ movl $ECCCTL, %edi
+ mov $0x05, %al
+ movb %al, (%edi)
+#endif
+out:
+ movl %ebx, %eax
jmp *%ebp
-
#endif /* CONFIG_SC520 */
diff --git a/cpu/ixp/Makefile b/cpu/ixp/Makefile
index ba2e589..2867270 100644
--- a/cpu/ixp/Makefile
+++ b/cpu/ixp/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,21 +23,25 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o
-OBJS = serial.o interrupts.o cpu.o timer.o pci.o
+COBJS = serial.o interrupts.o cpu.o timer.o pci.o
-all: .depend $(START) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/ixp/npe/Makefile b/cpu/ixp/npe/Makefile
index 937de9d..412b418 100644
--- a/cpu/ixp/npe/Makefile
+++ b/cpu/ixp/npe/Makefile
@@ -23,11 +23,13 @@
include $(TOPDIR)/config.mk
-LIB := libnpe.a
+LIB := $(obj)libnpe.a
-CFLAGS += -I$(TOPDIR)/cpu/ixp/npe/include -DCONFIG_IXP425_COMPONENT_ETHDB
+LOCAL_CFLAGS += -I$(TOPDIR)/cpu/ixp/npe/include -DCONFIG_IXP425_COMPONENT_ETHDB
+CFLAGS += $(LOCAL_CFLAGS)
+HOST_CFLAGS += $(LOCAL_CFLAGS)
-OBJS := npe.o \
+COBJS := npe.o \
miiphy.o \
IxOsalBufferMgt.o \
IxOsalIoMem.o \
@@ -78,14 +80,21 @@ OBJS := npe.o \
IxNpeMhSolicitedCbMgr.o \
IxNpeMhUnsolicitedCbMgr.o
+
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
+
all: $(LIB)
-$(LIB): $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/cpu/lh7a40x/Makefile b/cpu/lh7a40x/Makefile
index b45bd6a..2fcafb0 100644
--- a/cpu/lh7a40x/Makefile
+++ b/cpu/lh7a40x/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001, 2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,21 +23,25 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o
-OBJS = cpu.o speed.o interrupts.o serial.o
+COBJS = cpu.o speed.o interrupts.o serial.o
-all: .depend $(START) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/mcf52x2/Makefile b/cpu/mcf52x2/Makefile
index 879deb7..a05a803 100644
--- a/cpu/mcf52x2/Makefile
+++ b/cpu/mcf52x2/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -25,21 +25,25 @@ include $(TOPDIR)/config.mk
# CFLAGS += -DET_DEBUG
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START =
-OBJS = serial.o interrupts.o cpu.o speed.o cpu_init.o fec.o
+COBJS = serial.o interrupts.o cpu.o speed.o cpu_init.o fec.o
-all: .depend $(START) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/mcf52x2/fec.c b/cpu/mcf52x2/fec.c
index 6db6214..b6540b5 100644
--- a/cpu/mcf52x2/fec.c
+++ b/cpu/mcf52x2/fec.c
@@ -267,6 +267,7 @@ int eth_init (bd_t * bd)
fecp->fec_hash_table_high = 0;
fecp->fec_hash_table_low = 0;
#endif
+#endif
/* Set maximum receive buffer size.
*/
diff --git a/cpu/mcf52x2/start.S b/cpu/mcf52x2/start.S
index 8a83ca5..f1f4077 100644
--- a/cpu/mcf52x2/start.S
+++ b/cpu/mcf52x2/start.S
@@ -140,6 +140,7 @@ _start:
move.l #(CFG_MBAR + 1), %d0 /* set IPSBAR address + valid flag */
move.l %d0, 0x40000000
+#if defined(CONFIG_M5282)
/* Initialize RAMBAR1: locate SRAM and validate it */
move.l #(CFG_INIT_RAM_ADDR + 0x21), %d0
movec %d0, %RAMBAR1
@@ -171,6 +172,7 @@ _after_flashbar_copy:
#endif /* (TEXT_BASE == CFG_INT_FLASH_BASE) */
#endif
+#endif
/* if we come from a pre-loader we have no exception table and
* therefore no VBR to set
*/
diff --git a/cpu/microblaze/Makefile b/cpu/microblaze/Makefile
index 610043e..07ed6ce 100644
--- a/cpu/microblaze/Makefile
+++ b/cpu/microblaze/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,21 +23,25 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o
-OBJS = cpu.o interrupts.o
+COBJS = cpu.o interrupts.o
-all: .depend $(START) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) $(AOBJS:.o=.S)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) $(AOBJS:.o=.S) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/mips/Makefile b/cpu/mips/Makefile
index c8b30c7..f9a49df 100644
--- a/cpu/mips/Makefile
+++ b/cpu/mips/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2003
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,23 +23,27 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o
-OBJS = asc_serial.o au1x00_serial.o au1x00_eth.o au1x00_usb_ohci.o \
+COBJS = asc_serial.o au1x00_serial.o au1x00_eth.o au1x00_usb_ohci.o \
cpu.o interrupts.o incaip_clock.o
SOBJS = incaip_wdt.o cache.o
-all: .depend $(START) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS)
+all: $(obj).depend $(START) $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/mpc5xx/Makefile b/cpu/mpc5xx/Makefile
index b787b61..d696e79 100644
--- a/cpu/mpc5xx/Makefile
+++ b/cpu/mpc5xx/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2003
# Martin Winistoerfer, martinwinistoerfer@gmx.ch.
#
@@ -32,21 +35,25 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
+
+START = start.o
+COBJS = serial.o cpu.o cpu_init.o interrupts.o traps.o speed.o spi.o
-START = start.S
-OBJS = serial.o cpu.o cpu_init.o interrupts.o traps.o speed.o spi.o
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
-all: .depend $(START) $(LIB)
+all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/mpc5xxx/Makefile b/cpu/mpc5xxx/Makefile
index a97b625..683ded8 100644
--- a/cpu/mpc5xxx/Makefile
+++ b/cpu/mpc5xxx/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2003
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,23 +23,27 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o
-ASOBJS = io.o firmware_sc_task_bestcomm.impl.o firmware_sc_task.impl.o
-OBJS = i2c.o traps.o cpu.o cpu_init.o fec.o ide.o interrupts.o \
+SOBJS = io.o firmware_sc_task_bestcomm.impl.o firmware_sc_task.impl.o
+COBJS = i2c.o traps.o cpu.o cpu_init.o fec.o ide.o interrupts.o \
loadtask.o pci_mpc5200.o serial.o speed.o usb_ohci.o
-all: .depend $(START) $(ASOBJS) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) crv $@ $(ASOBJS) $(OBJS)
+ $(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(ASOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/mpc5xxx/interrupts.c b/cpu/mpc5xxx/interrupts.c
index 7bacecd..7b5cb8b 100644
--- a/cpu/mpc5xxx/interrupts.c
+++ b/cpu/mpc5xxx/interrupts.c
@@ -1,4 +1,7 @@
/*
+ * (C) Copyright 2006
+ * Detlev Zundel, DENX Software Engineering, dzu@denx.de
+ *
* (C) Copyright -2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
@@ -24,18 +27,212 @@
* MA 02111-1307 USA
*/
-/*
- * interrupts.c - just enough support for the decrementer/timer
+/* this section was ripped out of arch/ppc/syslib/mpc52xx_pic.c in the
+ * Linux 2.6 source with the following copyright.
+ *
+ * Based on (well, mostly copied from) the code from the 2.4 kernel by
+ * Dale Farnsworth <dfarnsworth@mvista.com> and Kent Borg.
+ *
+ * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com>
+ * Copyright (C) 2003 Montavista Software, Inc
*/
#include <common.h>
#include <asm/processor.h>
+#include <asm/io.h>
#include <command.h>
-int interrupt_init_cpu (ulong *decrementer_count)
+struct irq_action {
+ interrupt_handler_t *handler;
+ void *arg;
+ ulong count;
+};
+
+static struct irq_action irq_handlers[NR_IRQS];
+
+static struct mpc5xxx_intr *intr;
+static struct mpc5xxx_sdma *sdma;
+
+static void mpc5xxx_ic_disable(unsigned int irq)
+{
+ u32 val;
+
+ if (irq == MPC5XXX_IRQ0) {
+ val = in_be32(&intr->ctrl);
+ val &= ~(1 << 11);
+ out_be32(&intr->ctrl, val);
+ } else if (irq < MPC5XXX_IRQ1) {
+ BUG();
+ } else if (irq <= MPC5XXX_IRQ3) {
+ val = in_be32(&intr->ctrl);
+ val &= ~(1 << (10 - (irq - MPC5XXX_IRQ1)));
+ out_be32(&intr->ctrl, val);
+ } else if (irq < MPC5XXX_SDMA_IRQ_BASE) {
+ val = in_be32(&intr->main_mask);
+ val |= 1 << (16 - (irq - MPC5XXX_MAIN_IRQ_BASE));
+ out_be32(&intr->main_mask, val);
+ } else if (irq < MPC5XXX_PERP_IRQ_BASE) {
+ val = in_be32(&sdma->IntMask);
+ val |= 1 << (irq - MPC5XXX_SDMA_IRQ_BASE);
+ out_be32(&sdma->IntMask, val);
+ } else {
+ val = in_be32(&intr->per_mask);
+ val |= 1 << (31 - (irq - MPC5XXX_PERP_IRQ_BASE));
+ out_be32(&intr->per_mask, val);
+ }
+}
+
+static void mpc5xxx_ic_enable(unsigned int irq)
+{
+ u32 val;
+
+ if (irq == MPC5XXX_IRQ0) {
+ val = in_be32(&intr->ctrl);
+ val |= 1 << 11;
+ out_be32(&intr->ctrl, val);
+ } else if (irq < MPC5XXX_IRQ1) {
+ BUG();
+ } else if (irq <= MPC5XXX_IRQ3) {
+ val = in_be32(&intr->ctrl);
+ val |= 1 << (10 - (irq - MPC5XXX_IRQ1));
+ out_be32(&intr->ctrl, val);
+ } else if (irq < MPC5XXX_SDMA_IRQ_BASE) {
+ val = in_be32(&intr->main_mask);
+ val &= ~(1 << (16 - (irq - MPC5XXX_MAIN_IRQ_BASE)));
+ out_be32(&intr->main_mask, val);
+ } else if (irq < MPC5XXX_PERP_IRQ_BASE) {
+ val = in_be32(&sdma->IntMask);
+ val &= ~(1 << (irq - MPC5XXX_SDMA_IRQ_BASE));
+ out_be32(&sdma->IntMask, val);
+ } else {
+ val = in_be32(&intr->per_mask);
+ val &= ~(1 << (31 - (irq - MPC5XXX_PERP_IRQ_BASE)));
+ out_be32(&intr->per_mask, val);
+ }
+}
+
+static void mpc5xxx_ic_ack(unsigned int irq)
+{
+ u32 val;
+
+ /*
+ * Only some irqs are reset here, others in interrupting hardware.
+ */
+
+ switch (irq) {
+ case MPC5XXX_IRQ0:
+ val = in_be32(&intr->ctrl);
+ val |= 0x08000000;
+ out_be32(&intr->ctrl, val);
+ break;
+ case MPC5XXX_CCS_IRQ:
+ val = in_be32(&intr->enc_status);
+ val |= 0x00000400;
+ out_be32(&intr->enc_status, val);
+ break;
+ case MPC5XXX_IRQ1:
+ val = in_be32(&intr->ctrl);
+ val |= 0x04000000;
+ out_be32(&intr->ctrl, val);
+ break;
+ case MPC5XXX_IRQ2:
+ val = in_be32(&intr->ctrl);
+ val |= 0x02000000;
+ out_be32(&intr->ctrl, val);
+ break;
+ case MPC5XXX_IRQ3:
+ val = in_be32(&intr->ctrl);
+ val |= 0x01000000;
+ out_be32(&intr->ctrl, val);
+ break;
+ default:
+ if (irq >= MPC5XXX_SDMA_IRQ_BASE
+ && irq < (MPC5XXX_SDMA_IRQ_BASE + MPC5XXX_SDMA_IRQ_NUM)) {
+ out_be32(&sdma->IntPend,
+ 1 << (irq - MPC5XXX_SDMA_IRQ_BASE));
+ }
+ break;
+ }
+}
+
+static void mpc5xxx_ic_disable_and_ack(unsigned int irq)
+{
+ mpc5xxx_ic_disable(irq);
+ mpc5xxx_ic_ack(irq);
+}
+
+static void mpc5xxx_ic_end(unsigned int irq)
+{
+ mpc5xxx_ic_enable(irq);
+}
+
+void mpc5xxx_init_irq(void)
+{
+ u32 intr_ctrl;
+
+ /* Remap the necessary zones */
+ intr = (struct mpc5xxx_intr *)(MPC5XXX_ICTL);
+ sdma = (struct mpc5xxx_sdma *)(MPC5XXX_SDMA);
+
+ /* Disable all interrupt sources. */
+ out_be32(&sdma->IntPend, 0xffffffff); /* 1 means clear pending */
+ out_be32(&sdma->IntMask, 0xffffffff); /* 1 means disabled */
+ out_be32(&intr->per_mask, 0x7ffffc00); /* 1 means disabled */
+ out_be32(&intr->main_mask, 0x00010fff); /* 1 means disabled */
+ intr_ctrl = in_be32(&intr->ctrl);
+ intr_ctrl |= 0x0f000000 | /* clear IRQ 0-3 */
+ 0x00ff0000 | /* IRQ 0-3 level sensitive low active */
+ 0x00001000 | /* MEE master external enable */
+ 0x00000000 | /* 0 means disable IRQ 0-3 */
+ 0x00000001; /* CEb route critical normally */
+ out_be32(&intr->ctrl, intr_ctrl);
+
+ /* Zero a bunch of the priority settings. */
+ out_be32(&intr->per_pri1, 0);
+ out_be32(&intr->per_pri2, 0);
+ out_be32(&intr->per_pri3, 0);
+ out_be32(&intr->main_pri1, 0);
+ out_be32(&intr->main_pri2, 0);
+}
+
+int mpc5xxx_get_irq(struct pt_regs *regs)
+{
+ u32 status;
+ int irq = -1;
+
+ status = in_be32(&intr->enc_status);
+
+ if (status & 0x00000400) { /* critical */
+ irq = (status >> 8) & 0x3;
+ if (irq == 2) /* high priority peripheral */
+ goto peripheral;
+ irq += MPC5XXX_CRIT_IRQ_BASE;
+ } else if (status & 0x00200000) { /* main */
+ irq = (status >> 16) & 0x1f;
+ if (irq == 4) /* low priority peripheral */
+ goto peripheral;
+ irq += MPC5XXX_MAIN_IRQ_BASE;
+ } else if (status & 0x20000000) { /* peripheral */
+ peripheral:
+ irq = (status >> 24) & 0x1f;
+ if (irq == 0) { /* bestcomm */
+ status = in_be32(&sdma->IntPend);
+ irq = ffs(status) + MPC5XXX_SDMA_IRQ_BASE - 1;
+ } else
+ irq += MPC5XXX_PERP_IRQ_BASE;
+ }
+
+ return irq;
+}
+
+/****************************************************************************/
+
+int interrupt_init_cpu(ulong * decrementer_count)
{
*decrementer_count = get_tbclk() / CFG_HZ;
+ mpc5xxx_init_irq();
+
return (0);
}
@@ -44,14 +241,32 @@ int interrupt_init_cpu (ulong *decrementer_count)
/*
* Handle external interrupts
*/
-void
-external_interrupt(struct pt_regs *regs)
+void external_interrupt(struct pt_regs *regs)
{
- puts("external_interrupt (oops!)\n");
+ int irq, unmask = 1;
+
+ irq = mpc5xxx_get_irq(regs);
+
+ mpc5xxx_ic_disable_and_ack(irq);
+
+ enable_interrupts();
+
+ if (irq_handlers[irq].handler != NULL)
+ (*irq_handlers[irq].handler) (irq_handlers[irq].arg);
+ else {
+ printf("\nBogus External Interrupt IRQ %d\n", irq);
+ /*
+ * turn off the bogus interrupt, otherwise it
+ * might repeat forever
+ */
+ unmask = 0;
+ }
+
+ if (unmask)
+ mpc5xxx_ic_end(irq);
}
-void
-timer_interrupt_cpu (struct pt_regs *regs)
+void timer_interrupt_cpu(struct pt_regs *regs)
{
/* nothing to do here */
return;
@@ -63,22 +278,69 @@ timer_interrupt_cpu (struct pt_regs *regs)
* Install and free a interrupt handler.
*/
-void
-irq_install_handler(int vec, interrupt_handler_t *handler, void *arg)
+void irq_install_handler(int irq, interrupt_handler_t * handler, void *arg)
{
+ if (irq < 0 || irq >= NR_IRQS) {
+ printf("irq_install_handler: bad irq number %d\n", irq);
+ return;
+ }
+ if (irq_handlers[irq].handler != NULL)
+ printf("irq_install_handler: 0x%08lx replacing 0x%08lx\n",
+ (ulong) handler, (ulong) irq_handlers[irq].handler);
+
+ irq_handlers[irq].handler = handler;
+ irq_handlers[irq].arg = arg;
+
+ mpc5xxx_ic_enable(irq);
}
-void
-irq_free_handler(int vec)
+void irq_free_handler(int irq)
{
+ if (irq < 0 || irq >= NR_IRQS) {
+ printf("irq_free_handler: bad irq number %d\n", irq);
+ return;
+ }
+
+ mpc5xxx_ic_disable(irq);
+ irq_handlers[irq].handler = NULL;
+ irq_handlers[irq].arg = NULL;
}
/****************************************************************************/
-void
-do_irqinfo(cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[])
+#if (CONFIG_COMMANDS & CFG_CMD_IRQ)
+void do_irqinfo(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[])
{
- puts("IRQ related functions are unimplemented currently.\n");
+ int irq, re_enable;
+ u32 intr_ctrl;
+ char *irq_config[] = { "level sensitive, active high",
+ "edge sensitive, rising active edge",
+ "edge sensitive, falling active edge",
+ "level sensitive, active low"
+ };
+
+ re_enable = disable_interrupts();
+
+ intr_ctrl = in_be32(&intr->ctrl);
+ printf("Interrupt configuration:\n");
+
+ for (irq = 0; irq <= 3; irq++) {
+ printf("IRQ%d: %s\n", irq,
+ irq_config[(intr_ctrl >> (22 - 2 * irq)) & 0x3]);
+ }
+
+ puts("\nInterrupt-Information:\n" "Nr Routine Arg Count\n");
+
+ for (irq = 0; irq < NR_IRQS; irq++)
+ if (irq_handlers[irq].handler != NULL)
+ printf("%02d %08lx %08lx %ld\n", irq,
+ (ulong) irq_handlers[irq].handler,
+ (ulong) irq_handlers[irq].arg,
+ irq_handlers[irq].count);
+
+ if (re_enable)
+ enable_interrupts();
}
+#endif
diff --git a/cpu/mpc5xxx/serial.c b/cpu/mpc5xxx/serial.c
index 6cb523d..430d63f 100644
--- a/cpu/mpc5xxx/serial.c
+++ b/cpu/mpc5xxx/serial.c
@@ -166,6 +166,25 @@ void serial_putc(const char c)
}
#if defined(CONFIG_SERIAL_MULTI)
+void serial_putc_raw_dev(unsigned long dev_base, const char c)
+#else
+void serial_putc_raw(const char c)
+#endif
+{
+#if defined(CONFIG_SERIAL_MULTI)
+ volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base;
+#else
+ volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
+#endif
+ /* Wait for last character to go. */
+ while (!(psc->psc_status & PSC_SR_TXEMP))
+ ;
+
+ psc->psc_buffer_8 = c;
+}
+
+
+#if defined(CONFIG_SERIAL_MULTI)
void serial_puts_dev (unsigned long dev_base, const char *s)
#else
void serial_puts (const char *s)
@@ -240,6 +259,43 @@ void serial_setbrg(void)
}
#if defined(CONFIG_SERIAL_MULTI)
+void serial_setrts_dev (unsigned long dev_base, int s)
+#else
+void serial_setrts(int s)
+#endif
+{
+#if defined(CONFIG_SERIAL_MULTI)
+ volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base;
+#else
+ volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
+#endif
+
+ if (s) {
+ /* Assert RTS (become LOW) */
+ psc->op1 = 0x1;
+ }
+ else {
+ /* Negate RTS (become HIGH) */
+ psc->op0 = 0x1;
+ }
+}
+
+#if defined(CONFIG_SERIAL_MULTI)
+int serial_getcts_dev (unsigned long dev_base)
+#else
+int serial_getcts(void)
+#endif
+{
+#if defined(CONFIG_SERIAL_MULTI)
+ volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base;
+#else
+ volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
+#endif
+
+ return (psc->ip & 0x1) ? 0 : 1;
+}
+
+#if defined(CONFIG_SERIAL_MULTI)
int serial0_init(void)
{
return (serial_init_dev(PSC_BASE));
diff --git a/cpu/mpc8220/Makefile b/cpu/mpc8220/Makefile
index 7c9b6c9..1f2e931 100644
--- a/cpu/mpc8220/Makefile
+++ b/cpu/mpc8220/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2003
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,24 +23,28 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o
-ASOBJS = io.o fec_dma_tasks.o
-OBJS = cpu.o cpu_init.o dramSetup.o fec.o i2c.o \
+SOBJS = io.o fec_dma_tasks.o
+COBJS = cpu.o cpu_init.o dramSetup.o fec.o i2c.o \
interrupts.o loadtask.o speed.o \
traps.o uart.o pci.o
-all: .depend $(START) $(ASOBJS) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) crv $@ $(ASOBJS) $(OBJS)
+ $(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(ASOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/mpc8220/pci.c b/cpu/mpc8220/pci.c
index ca4a04d..4ef214e 100644
--- a/cpu/mpc8220/pci.c
+++ b/cpu/mpc8220/pci.c
@@ -170,7 +170,7 @@ pci_mpc8220_init(struct pci_controller *hose)
hose->region_count = 3;
hose->cfg_addr = &(xcpci->cfg_adr);
- hose->cfg_data = CONFIG_PCI_CFG_BUS;
+ hose->cfg_data = (volatile unsigned char *)CONFIG_PCI_CFG_BUS;
pci_set_ops(hose,
mpc8220_pci_read_config_byte,
diff --git a/cpu/mpc824x/Makefile b/cpu/mpc824x/Makefile
index df0d64e..d9fd9bf 100644
--- a/cpu/mpc824x/Makefile
+++ b/cpu/mpc824x/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -22,26 +22,35 @@
#
include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)drivers/epic)
+$(shell mkdir -p $(obj)drivers/i2c)
+endif
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
-START = start.S
-OBJS = traps.o cpu.o cpu_init.o interrupts.o speed.o \
- drivers/epic/epic1.o drivers/i2c/i2c.o pci.o bedbug_603e.o
+START = start.o
+COBJS = traps.o cpu.o cpu_init.o interrupts.o speed.o \
+ drivers/epic/epic1.o drivers/i2c/i2c.o pci.o
+COBJS_LN = bedbug_603e.o
-all: .depend $(START) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) $(addprefix $(obj),$(COBJS_LN:.o=.c))
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS) $(COBJS_LN))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
$(AR) crv $@ $(OBJS)
-bedbug_603e.c:
- ln -s ../mpc8260/bedbug_603e.c bedbug_603e.c
+$(obj)bedbug_603e.c:
+ ln -s $(src)../mpc8260/bedbug_603e.c $(obj)bedbug_603e.c
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/mpc824x/drivers/dma/Makefile b/cpu/mpc824x/drivers/dma/Makefile
deleted file mode 100644
index 59e2fac..0000000
--- a/cpu/mpc824x/drivers/dma/Makefile
+++ /dev/null
@@ -1,83 +0,0 @@
-##########################################################################
-#
-# Copyright Motorola, Inc. 1997
-# ALL RIGHTS RESERVED
-#
-# You are hereby granted a copyright license to use, modify, and
-# distribute the SOFTWARE so long as this entire notice is retained
-# without alteration in any modified and/or redistributed versions,
-# and that such modified versions are clearly identified as such.
-# No licenses are granted by implication, estoppel or otherwise under
-# any patents or trademarks of Motorola, Inc.
-#
-# The SOFTWARE is provided on an "AS IS" basis and without warranty.
-# To the maximum extent permitted by applicable law, MOTOROLA DISCLAIMS
-# ALL WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING IMPLIED
-# WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
-# PURPOSE AND ANY WARRANTY AGAINST INFRINGEMENT WITH
-# REGARD TO THE SOFTWARE (INCLUDING ANY MODIFIED VERSIONS
-# THEREOF) AND ANY ACCOMPANYING WRITTEN MATERIALS.
-#
-# To the maximum extent permitted by applicable law, IN NO EVENT SHALL
-# MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER
-# (INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF
-# BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS
-# INFORMATION, OR OTHER PECUNIARY LOSS) ARISING OF THE USE OR
-# INABILITY TO USE THE SOFTWARE.
-#
-############################################################################
-TARGET = libdma.a
-
-DEBUG = -DDMADBG
-LST = -Hanno -S
-OPTIM =
-CC = /risc/tools/pkgs/metaware/bin/hcppc
-CFLAGS = -Hnocopyr -c -Hsds -Hon=Char_default_unsigned -Hon=Char_is_rep -I../inc -I/risc/tools/pkgs/metaware/inc
-CCobj = $(CC) $(CFLAGS) $(DEBUG) $(OPTIM)
-PREP = $(CC) $(CFLAGS) -P
-
-# Assembler used to build the .s files (for the board version)
-
-ASOPT = -big_si -c
-ASDEBUG = -l -fm
-AS = /risc/tools/pkgs/metaware/bin/asppc
-
-# Linker to bring .o files together into an executable.
-
-LKOPT = -Bbase=0 -q -r -Qn
-LKCMD =
-LINK = /risc/tools/pkgs/metaware/bin/ldppc $(LKCMD) $(LKOPT)
-
-# DOS Utilities
-
-DEL = rm
-COPY = cp
-LIST = ls
-
-OBJECTS = dma1.o dma2.o
-
-all: $(TARGET)
-
-$(TARGET): $(OBJECTS)
- $(LINK) $(OBJECTS) -o $@
-
-objects: dma1.o
-
-clean:
- $(DEL) -f *.o *.i *.map *.lst $(TARGET) $(OBJECTS)
-
-.s.o:
- $(DEL) -f $*.i
- $(PREP) -Hasmcpp $<
- $(AS) $(ASOPT) $*.i
-# $(AS) $(ASOPT) $(ASDEBUG) $*.i > $*.lst
-
-.c.o:
- $(CCobj) $<
-
-.c.s:
- $(CCobj) $(LST) $<
-
-dma1.o: dma_export.h dma.h dma1.c
-
-dma2.o: dma.h dma2.s
diff --git a/cpu/mpc824x/drivers/dma/Makefile_pc b/cpu/mpc824x/drivers/dma/Makefile_pc
deleted file mode 100644
index 8df2a3c..0000000
--- a/cpu/mpc824x/drivers/dma/Makefile_pc
+++ /dev/null
@@ -1,89 +0,0 @@
-##########################################################################
-#
-# makefile_pc for use with mksnt tools drivers/dma
-#
-# Copyright Motorola, Inc. 1997
-# ALL RIGHTS RESERVED
-#
-# You are hereby granted a copyright license to use, modify, and
-# distribute the SOFTWARE so long as this entire notice is retained
-# without alteration in any modified and/or redistributed versions,
-# and that such modified versions are clearly identified as such.
-# No licenses are granted by implication, estoppel or otherwise under
-# any patents or trademarks of Motorola, Inc.
-#
-# The SOFTWARE is provided on an "AS IS" basis and without warranty.
-# To the maximum extent permitted by applicable law, MOTOROLA DISCLAIMS
-# ALL WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING IMPLIED
-# WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
-# PURPOSE AND ANY WARRANTY AGAINST INFRINGEMENT WITH
-# REGARD TO THE SOFTWARE (INCLUDING ANY MODIFIED VERSIONS
-# THEREOF) AND ANY ACCOMPANYING WRITTEN MATERIALS.
-#
-# To the maximum extent permitted by applicable law, IN NO EVENT SHALL
-# MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER
-# (INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF
-# BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS
-# INFORMATION, OR OTHER PECUNIARY LOSS) ARISING OF THE USE OR
-# INABILITY TO USE THE SOFTWARE.
-#
-############################################################################
-TARGET = libdma.a
-
-DEBUG = -DDMADBG
-LST = -Hanno -S
-OPTIM =
-CC = m:/old_tools/tools/hcppc/bin/hcppc
-CFLAGS = -Hnocopyr -c -Hsds -Hon=Char_default_unsigned -Hon=Char_is_rep -I../inc -I/risc/tools/pkgs/metaware/inc
-CCobj = $(CC) $(CFLAGS) $(DEBUG) $(OPTIM)
-PREP = $(CC) $(CFLAGS) -P
-
-# Assembler used to build the .s files (for the board version)
-
-ASOPT = -big_si -c
-ASDEBUG = -l -fm
-AS = m:/old_tools/tools/hcppc/bin/asppc
-
-# Linker to bring .o files together into an executable.
-
-LKOPT = -Bbase=0 -q -r -Qn
-LKCMD =
-LINK = m:/old_tools/tools/hcppc/bin/ldppc $(LKCMD) $(LKOPT)
-
-# DOS Utilities
-
-DEL = rm
-COPY = cp
-LIST = ls
-
-OBJECTS = dma1.o dma2.o
-
-all: $(TARGET)
-
-$(TARGET): $(OBJECTS)
- $(LINK) $(OBJECTS) -o $@
-
-objects: dma1.o
-
-clean:
- $(DEL) -f *.o *.i *.map *.lst $(TARGET) $(OBJECTS)
-
-.s.o:
- $(DEL) -f $*.i
- $(PREP) -Hasmcpp $<
- $(AS) $(ASOPT) $*.i
-# $(AS) $(ASOPT) $(ASDEBUG) $*.i > $*.lst
-
-.c.o:
- $(CCobj) $<
-
-.c.s:
- $(CCobj) $(LST) $<
-
-dma1.o: dma_export.h dma.h dma1.c
- $(CCobj) $<
-
-dma2.o: dma.h dma2.s
- $(DEL) -f $*.i
- $(PREP) -Hasmcpp $<
- $(AS) $(ASOPT) $*.i
diff --git a/cpu/mpc824x/drivers/dma/README b/cpu/mpc824x/drivers/dma/README
deleted file mode 100644
index 06f4bc0..0000000
--- a/cpu/mpc824x/drivers/dma/README
+++ /dev/null
@@ -1,100 +0,0 @@
-CONTENT:
-
- dma.h
- dma1.c
- dma2.s
-
-WHAT ARE THESE FILES:
-
-These files contain MPC8240 (Kahlua) DMA controller
-driver routines. The driver routines are not
-written for any specific operating system.
-They serves the purpose of code sample, and
-jump-start for using the MPC8240 DMA controller.
-
-For the reason of correctness of C language
-syntax, these files are compiled by Metaware
-C compiler and assembler.
-
-ENDIAN NOTATION:
-
-The algorithm is designed for big-endian mode,
-software is responsible for byte swapping.
-
-USAGE:
-
-1. The host system that is running on MPC8240
- or using MPC8240 as I/O device shall link
- the files listed here. The memory location
- of driver routines shall take into account of
- that driver routines need to run in supervisor
- mode and they process DMA controller interrupt.
-
-2. The host system is responsible for configuring
- the MPC8240 including Embedded Utilities Memory
- Block. Since the DMA controller on MPC8240 can
- be accessed by either local 603e core or the host
- that MPC8240 serves as I/O processor through host
- PCI configuration, it is important that the local
- processor uses EUMBBAR to access its local DMA
- controller while the PCI master uses I/O
- processor's PCSRBAR to access the DMA controller
- on I/O device.
-
- To qualify whether is EUMBBAR or PCSRBAR, one
- additional parameter is requied from the host
- system, LOCAL or REMOTE so that the base value
- can be correctly interpreted.
-
-3. If the host system is also using the EPIC unit
- on MPC8240, the system can register the
- DMA_ISR with the EPIC including other
- desired resources.
-
- If the host system does not using the EPIC unit
- on MPC8240, DMA_ISR function can be called for
- each desired time interval.
-
- In both cases, the host system is free to
- provide its own interrupt service routine.
-
-4. To start a direct mode DMA transaction,
- use DMA_Bld_Curr with the start parameter
- set to 1.
-
- To start a chaining mode DMA transaction,
- the application shall build descriptors
- in memory first, next, use DMA_Bld_Desp
- with the start parameter set to 1.
-
-5. DMA_Start function clears, then sets the CS
- bit of DMA mode register.
-
- DMA_Halt function clears the CS bit of DMA
- mode register.
-
- These functions can be used to start and
- halt the DMA transaction.
-
- If the chaining descriptors has been
- modified since the last time a DMA
- transaction started, use DMA_Chn_Cnt
- function to let DMA controller process
- the modified descriptor chain without
- stopping or disturbing the current DMA
- transaction.
-
- It is the host system's responsibility of
- setting up the correct DMA transfer mode
- and pass the correct memory address parameters.
-
-6. It is the host system's responsibility of
- queueing the DMA I/O request. The host
- system can call the DMA_ISR with its own
- desired interrupt service subroutines to
- handle each individual interrupt and queued
- DMA I/O requests.
-
-7. The DMA driver routines contains a set
- of utilities, Set and Get, for host system
- to query and modify the desired DMA registers.
diff --git a/cpu/mpc824x/drivers/dma/dma.h b/cpu/mpc824x/drivers/dma/dma.h
deleted file mode 100644
index a21be74..0000000
--- a/cpu/mpc824x/drivers/dma/dma.h
+++ /dev/null
@@ -1,326 +0,0 @@
-#ifndef DMA_H
-#define DMA_H
-/*******************************************************
- *
- * copyright @ Motorola 1999
- *
- *******************************************************/
-#define NUM_DMA_REG 7
-#define DMA_MR_REG 0
-#define DMA_SR_REG 1
-#define DMA_CDAR_REG 2
-#define DMA_SAR_REG 3
-#define DMA_DAR_REG 4
-#define DMA_BCR_REG 5
-#define DMA_NDAR_REG 6
-
-typedef enum _dmastatus
-{
- DMASUCCESS = 0x1000,
- DMALMERROR,
- DMAPERROR,
- DMACHNBUSY,
- DMAEOSINT,
- DMAEOCAINT,
- DMAINVALID,
- DMANOEVENT,
-} DMAStatus;
-
-typedef enum _location
-{
- LOCAL = 0, /* local processor accesses on board DMA,
- local processor's eumbbar is required */
- REMOTE = 1, /* PCI master accesses DMA on I/O board,
- I/O processor's pcsrbar is required */
-} LOCATION;
-
-typedef enum dma_mr_bit
-{
- IRQS = 0x00080000,
- PDE = 0x00040000,
- DAHTS = 0x00030000,
- SAHTS = 0x0000c000,
- DAHE = 0x00002000,
- SAHE = 0x00001000,
- PRC = 0x00000c00,
- EIE = 0x00000080,
- EOTIE = 0x00000040,
- DL = 0x00000008,
- CTM = 0x00000004,
- CC = 0x00000002,
- CS = 0x00000001,
-} DMA_MR_BIT;
-
-typedef enum dma_sr_bit
-{
- LME = 0x00000080,
- PE = 0x00000010,
- CB = 0x00000004,
- EOSI = 0x00000002,
- EOCAI = 0x00000001,
-} DMA_SR_BIT;
-
-/* structure for DMA Mode Register */
-typedef struct _dma_mr
-{
- unsigned int reserved0 : 12;
- unsigned int irqs : 1;
- unsigned int pde : 1;
- unsigned int dahts : 2;
- unsigned int sahts : 2;
- unsigned int dahe : 1;
- unsigned int sahe : 1;
- unsigned int prc : 2;
- unsigned int reserved1 : 1;
- unsigned int eie : 1;
- unsigned int eotie : 1;
- unsigned int reserved2 : 3;
- unsigned int dl : 1;
- unsigned int ctm : 1;
- /* if chaining mode is enabled, any time, user can modify the
- * descriptor and does not need to halt the current DMA transaction.
- * Set CC bit, enable DMA to process the modified descriptors
- * Hardware will clear this bit each time, DMA starts.
- */
- unsigned int cc : 1;
- /* cs bit has dua role, halt the current DMA transaction and
- * (re)start DMA transaction. In chaining mode, if the descriptor
- * needs modification, cs bit shall be used not the cc bit.
- * Hardware will not set/clear this bit each time DMA transaction
- * stops or starts. Software shall do it.
- *
- * cs bit shall not be used to halt chaining DMA transaction for
- * modifying the descriptor. That is the role of CC bit.
- */
- unsigned int cs : 1;
-} DMA_MR;
-
-/* structure for DMA Status register */
-typedef struct _dma_sr
-{
- unsigned int reserved0 : 24;
- unsigned int lme : 1;
- unsigned int reserved1 : 2;
- unsigned int pe : 1;
- unsigned int reserved2 : 1;
- unsigned int cb : 1;
- unsigned int eosi : 1;
- unsigned int eocai : 1;
-} DMA_SR;
-
-/* structure for DMA current descriptor address register */
-typedef struct _dma_cdar
-{
- unsigned int cda : 27;
- unsigned int snen : 1;
- unsigned int eosie : 1;
- unsigned int ctt : 2;
- unsigned int eotd : 1;
-} DMA_CDAR;
-
-/* structure for DMA byte count register */
-typedef struct _dma_bcr
-{
- unsigned int reserved : 6;
- unsigned int bcr : 26;
-} DMA_BCR;
-
-/* structure for DMA Next Descriptor Address register */
-typedef struct _dma_ndar
-{
- unsigned int nda : 27;
- unsigned int ndsnen : 1;
- unsigned int ndeosie: 1;
- unsigned int ndctt : 2;
- unsigned int eotd : 1;
-} DMA_NDAR;
-
-/* structure for DMA current transaction info */
-typedef struct _dma_curr
-{
- unsigned int src_addr;
- unsigned int dest_addr;
- unsigned int byte_cnt;
-} DMA_CURR;
-
-/************************* Kernel API********************
- * Kernel APIs are used to interface with O.S. kernel.
- * They are the functions required by O.S. kernel to
- * provide I/O service.
- ********************************************************/
-
-/**************DMA Device Control Functions ********/
-
-/**
- * Note:
- *
- * In all following functions, the host (KAHLUA) processor has a
- * choice of accessing on board local DMA (LOCAL),
- * or DMA on a distributed KAHLUA (REMOTE). In either case,
- * the caller shall pass the configured embedded utility memory
- * block base address relative to the DMA. If LOCAL DMA is used,
- * this parameter shall be EUMBBAR, if REMOTE is used, the
- * parameter shall be the corresponding PCSRBAR.
- **/
-
-/**************************************************************
- * function: DMA_Get_Stat
- *
- * description: return the content of status register of
- * the given DMA channel
- * if error, return DMAINVALID. Otherwise return
- * DMASUCCESS.
- *
- **************************************************************/
-static DMAStatus DMA_Get_Stat( LOCATION, unsigned int eumbbar, unsigned int channel, DMA_SR * );
-
-/**************************************************************
- * function: DMA_Get_Mode
- *
- * description: return the content of mode register of the
- * given DMA channel
- * if error, return DMAINVALID. Otherwise return DMASUCCESS.
- *
- **************************************************************/
-static DMAStatus DMA_Get_Mode( LOCATION, unsigned int eumbbar, unsigned int channel, DMA_MR * );
-
-/**************************************************************
- * function: DMA_Set_Mode
- *
- * description: Set a new mode to a given DMA channel
- * return DMASUCCESS if success, otherwise return DMACHNINVALID
- *
- * note: It is not a good idea of changing the DMA mode during
- * the middle of a transaction.
- **************************************************************/
-static DMAStatus DMA_Set_Mode( LOCATION, unsigned int eumbbar, unsigned int channel, DMA_MR mode );
-
-/*************************************************************
- * function: DMA_ISR
- *
- * description: DMA interrupt service routine
- * return DMAStatus based on the status
- *
- *************************************************************/
-static DMAStatus DMA_ISR( unsigned int eumbbar,
- unsigned int channel,
- DMAStatus (*lme_func)( unsigned int, unsigned int, DMAStatus ),
- DMAStatus (*pe_func) ( unsigned int, unsigned int, DMAStatus ),
- DMAStatus (*eosi_func)( unsigned int, unsigned int, DMAStatus ),
- DMAStatus (*eocai_func)(unsigned int, unsigned int, DMAStatus ));
-
-static DMAStatus dma_error_func( unsigned int, unsigned int, DMAStatus );
-
-/********************* DMA I/O function ********************/
-
-/************************************************************
- * function: DMA_Start
- *
- * description: start a given DMA channel transaction
- * return DMASUCCESS if success, otherwise return DMACHNINVALID
- *
- * note: this function will clear DMA_MR(CC) first, then
- * set DMA_MR(CC).
- ***********************************************************/
-static DMAStatus DMA_Start( LOCATION, unsigned int eumbbar,unsigned int channel );
-
-/***********************************************************
- * function: DMA_Halt
- *
- * description: halt the current dma transaction on the specified
- * channel.
- * return DMASUCCESS if success, otherwise return DMACHNINVALID
- *
- * note: if the specified DMA channel is idle, nothing happens
- *************************************************************/
-static DMAStatus DMA_Halt( LOCATION, unsigned int eumbbar,unsigned int channel );
-
-/*************************************************************
- * function: DMA_Chn_Cnt
- *
- * description: set the DMA_MR(CC) bit for a given channel
- * that is in chaining mode.
- * return DMASUCCESS if successfule, otherwise return DMACHNINVALID
- *
- * note: if the given channel is not in chaining mode, nothing
- * happen.
- *
- *************************************************************/
-static DMAStatus DMA_Chn_Cnt( LOCATION, unsigned int eumbbar,unsigned int channel );
-
-/*********************** App. API ***************************
- * App. API are the APIs Kernel provides for the application
- * level program
- ************************************************************/
-/**************************************************************
- * function: DMA_Bld_Curr
- *
- * description: set current src, dest, byte count registers
- * according to the desp for a given channel
- *
- * if the given channel is busy, no change made,
- * return DMACHNBUSY.
- *
- * otherwise return DMASUCCESS.
- *
- * note:
- **************************************************************/
-static DMAStatus DMA_Bld_Curr( LOCATION,
- unsigned int eumbbar,
- unsigned int channel,
- DMA_CURR desp );
-
-/**************************************************************
- * function: DMA_Poke_Curr
- *
- * description: poke the current src, dest, byte count registers
- * for a given channel.
- *
- * return DMASUCCESS if no error otherwise return DMACHNERROR
- *
- * note: Due to the undeterministic parallelism, in chaining
- * mode, the value returned by this function shall
- * be taken as reference when the query is made rather
- * than the absolute snapshot when the value is returned.
- **************************************************************/
-static DMAStatus DMA_Poke_Curr( LOCATION,
- unsigned int eumbbar,
- unsigned int channel,
- DMA_CURR* desp );
-
-/**************************************************************
- * function: DMA_Bld_Desp
- *
- * description: set current descriptor address register
- * according to the desp for a given channel
- *
- * if the given channel is busy return DMACHNBUSY
- * and no change made, otherwise return DMASUCCESS.
- *
- * note:
- **************************************************************/
-static DMAStatus DMA_Bld_Desp( LOCATION host,
- unsigned int eumbbar,
- unsigned int channel,
- DMA_CDAR desp );
-
-/**************************************************************
- * function: DMA_Poke_Desp
- *
- * description: poke the current descriptor address register
- * for a given channel
- *
- * return DMASUCCESS if no error otherwise return
- * DMAINVALID
- *
- * note: Due to the undeterministic parallellism of DMA operation,
- * the value returned by this function shall be taken as
- * the most recently used descriptor when the last time
- * DMA starts a chaining mode operation.
- **************************************************************/
-static DMAStatus DMA_Poke_Desp( LOCATION,
- unsigned int eumbbar,
- unsigned int channel,
- DMA_CDAR *desp );
-
-#endif
diff --git a/cpu/mpc824x/drivers/dma/dma1.c b/cpu/mpc824x/drivers/dma/dma1.c
deleted file mode 100644
index 9c85267..0000000
--- a/cpu/mpc824x/drivers/dma/dma1.c
+++ /dev/null
@@ -1,801 +0,0 @@
-/************************************************************
- *
- * copyright @ Motorola, 1999
- *
- * App. API
- *
- * App. API are the APIs Kernel provides for the application
- * level program
- *
- ************************************************************/
-#include "dma_export.h"
-#include "dma.h"
-
-/* Define a macro to use an optional application-layer print function, if
- * one was passed to the library during initialization. If there was no
- * function pointer passed, this protects against referencing a NULL pointer.
- * Also define The global variable that holds the passed pointer.
- */
-#define PRINT if ( app_print ) app_print
-static int (*app_print)(char *,...);
-
-/* Set by call to get_eumbbar during DMA_Initialize.
- * This could be globally available to the library, but there is
- * an advantage to passing it as a parameter: it is already in a register
- * and doesn't have to be loaded from memory. Also, that is the way the
- * library was already implemented and I don't want to change it without
- * a more detailed analysis.
- * It is being set as a global variable during initialization to hide it from
- * the DINK application layer, because it is Kahlua-specific. I think that
- * get_eumbbar, load_runtime_reg, and store_runtime_reg should be defined in
- * a Kahlua-specific library dealing with the embedded utilities memory block.
- * Right now, get_eumbbar is defined in dink32/kahlua.s. The other two are
- * defined in dink32/drivers/i2c/i2c2.s, drivers/dma/dma2.s, etc.
- */
-static unsigned int Global_eumbbar = 0;
-extern unsigned int get_eumbbar();
-
-
-extern unsigned int load_runtime_reg( unsigned int eumbbar, unsigned int reg );
-#pragma Alias( load_runtime_reg, "load_runtime_reg" );
-
-extern void store_runtime_reg( unsigned int eumbbar, unsigned int reg, unsigned int val );
-#pragma Alias( store_runtime_reg, "store_runtime_reg" );
-
-unsigned int dma_reg_tb[][14] = {
- /* local DMA registers */
- {
- /* DMA_0_MR */ 0x00001100,
- /* DMA_0_SR */ 0x00001104,
- /* DMA_0_CDAR */ 0x00001108,
- /* DMA_0_SAR */ 0x00001110,
- /* DMA_0_DAR */ 0x00001118,
- /* DMA_0_BCR */ 0x00001120,
- /* DMA_0_NDAR */ 0x00001124,
- /* DMA_1_MR */ 0x00001200,
- /* DMA_1_SR */ 0x00001204,
- /* DMA_1_CDAR */ 0x00001208,
- /* DMA_1_SAR */ 0x00001210,
- /* DMA_1_DAR */ 0x00001218,
- /* DMA_1_BCR */ 0x00001220,
- /* DMA_1_NDAR */ 0x00001224,
- },
- /* remote DMA registers */
- {
- /* DMA_0_MR */ 0x00000100,
- /* DMA_0_SR */ 0x00000104,
- /* DMA_0_CDAR */ 0x00000108,
- /* DMA_0_SAR */ 0x00000110,
- /* DMA_0_DAR */ 0x00000118,
- /* DMA_0_BCR */ 0x00000120,
- /* DMA_0_NDAR */ 0x00000124,
- /* DMA_1_MR */ 0x00000200,
- /* DMA_1_SR */ 0x00000204,
- /* DMA_1_CDAR */ 0x00000208,
- /* DMA_1_SAR */ 0x00000210,
- /* DMA_1_DAR */ 0x00000218,
- /* DMA_1_BCR */ 0x00000220,
- /* DMA_1_NDAR */ 0x00000224,
- },
-};
-
-/* API functions */
-
-/* Initialize DMA unit with the following:
- * optional pointer to application layer print function
- *
- * These parameters may be added:
- * ???
- * Interrupt enables, modes, etc. are set for each transfer.
- *
- * This function must be called before DMA unit can be used.
- */
-extern
-DMA_Status DMA_Initialize( int (*p)(char *,...))
-{
- DMAStatus status;
- /* establish the pointer, if there is one, to the application's "printf" */
- app_print = p;
-
- /* If this is the first call, get the embedded utilities memory block
- * base address. I'm not sure what to do about error handling here:
- * if a non-zero value is returned, accept it.
- */
- if ( Global_eumbbar == 0)
- Global_eumbbar = get_eumbbar();
- if ( Global_eumbbar == 0)
- {
- PRINT( "DMA_Initialize: can't find EUMBBAR\n" );
- return DMA_ERROR;
- }
-
- return DMA_SUCCESS;
-}
-
-
-/* Perform the DMA transfer, only direct mode is currently implemented.
- * At this point, I think it would be better to define a different
- * function for chaining mode.
- * Also, I'm not sure if it is appropriate to have the "generic" API
- * accept snoop and int_steer parameters. The DINK user interface allows
- * them, so for now I'll leave them.
- *
- * int_steer controls DMA interrupt steering to PCI or local processor
- * type is the type of transfer: M2M, M2P, P2M, P2P
- * source is the source address of the data
- * dest is the destination address of the data
- * len is the length of data to transfer
- * channel is the DMA channel to use for the transfer
- * snoop is the snoop enable control
- */
-extern DMA_Status DMA_direct_transfer( DMA_INTERRUPT_STEER int_steer,
- DMA_TRANSFER_TYPE type,
- unsigned int source,
- unsigned int dest,
- unsigned int len,
- DMA_CHANNEL channel,
- DMA_SNOOP_MODE snoop)
-{
- DMA_MR md;
- DMA_CDAR cdar;
- /* it's inappropriate for curr to be a struct, but I'll leave it */
- DMA_CURR curr;
-
- DMAStatus stat;
-
- /* The rest of this code was moved from device.c test_dma to here.
- * It needs to be cleaned up and validated, but at least it is removed
- * from the application and API. Most of the mode is left hard coded.
- * This should be changed after the final API is defined and the user
- * application has a way to control the transfer.
- *
- */
-
- if ( DMA_Get_Mode( LOCAL, Global_eumbbar, channel, &md ) != DMASUCCESS )
- {
- return DMA_ERROR;
- }
-
- md.irqs = int_steer;
- md.pde = 0;
- md.dahts = 3; /* 8 - byte */
- md.sahts = 3; /* 8 - byte */
- md.dahe = 0;
- md.sahe = 0;
- md.prc = 0;
- /* if steering interrupts to local processor, use polling mode */
- if ( int_steer == DMA_INT_STEER_PCI )
- {
- md.eie = 1;
- md.eotie = 1;
- } else {
- md.eie = 0;
- md.eotie = 0;
- }
- md.dl = 0;
- md.ctm = 1; /* direct mode */
- md.cc = 0;
-
- /* validate the length range */
- if (len > 0x3ffffff )
- {
- PRINT( "dev DMA: length of transfer too large: %d\n", len );
- return DMA_ERROR;
- }
-
- /* inappropriate to use a struct, but leave as is for now */
- curr.src_addr = source;
- curr.dest_addr = dest;
- curr.byte_cnt = len;
-
- (void)DMA_Poke_Desp( LOCAL, Global_eumbbar, channel, &cdar );
- cdar.snen = snoop;
- cdar.ctt = type;
-
- if ( ( stat = DMA_Bld_Desp( LOCAL, Global_eumbbar, channel, cdar ))
- != DMASUCCESS ||
- ( stat = DMA_Bld_Curr( LOCAL, Global_eumbbar, channel, curr ))
- != DMASUCCESS ||
- ( stat = DMA_Set_Mode( LOCAL, Global_eumbbar, channel, md ))
- != DMASUCCESS ||
- ( stat = DMA_Start( LOCAL, Global_eumbbar, channel ))
- != DMASUCCESS )
- {
- if ( stat == DMACHNBUSY )
- {
- PRINT( "dev DMA: channel %d busy.\n", channel );
- }
- else
- {
- PRINT( "dev DMA: invalid channel request.\n", channel );
- }
-
- return DMA_ERROR;
- }
-
-/* Since we are interested at the DMA performace right now,
- we are going to do as less as possible to burden the
- 603e core.
-
- if you have epic enabled or don't care the return from
- DMA operation, you can just return SUCCESS.
-
- if you don't have epic enabled and care the DMA result,
- you can use the polling method below.
-
- Note: I'll attempt to activate the code for handling polling.
- */
-
-#if 0
- /* if steering interrupt to local processor, let it handle results */
- if ( int_steer == DMA_INT_STEER_LOCAL )
- {
- return DMA_SUCCESS;
- }
-
- /* polling since interrupt goes to PCI */
- do
- {
- stat = DMA_ISR( Global_eumbbar, channel, dma_error_func,
- dma_error_func, dma_error_func, dma_error_func );
- }
- while ( stat == DMANOEVENT );
-#endif
-
- return DMA_SUCCESS;
-}
-
-/* DMA library internal functions */
-
-/**
- * Note:
- *
- * In all following functions, the host (KAHLUA) processor has a
- * choice of accessing on board local DMA (LOCAL),
- * or DMA on a distributed KAHLUA (REMOTE). In either case,
- * the caller shall pass the configured embedded utility memory
- * block base address relative to the DMA. If LOCAL DMA is used,
- * this parameter shall be EUMBBAR, if REMOTE is used, the
- * parameter shall be the corresponding PCSRBAR.
- **/
-
-/**************************************************************
- * function: DMA_Get_Stat
- *
- * description: return the content of status register of
- * the given DMA channel
- *
- * if error, reserved0 field all 1s.
- **************************************************************/
-static
-DMAStatus DMA_Get_Stat( LOCATION host, unsigned int eumbbar, unsigned int channel, DMA_SR *stat )
-{
- unsigned int tmp;
-
- if ( channel != 0 && channel != 1 || stat == 0 )
- {
- return DMAINVALID;
- }
-
- tmp = load_runtime_reg( eumbbar, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_SR_REG] );
-#ifdef DMADBG0
- PRINT( "%s(%d): %s DMA %d (0x%08x) stat = 0x%08x\n", __FILE__, __LINE__,
- ( host == LOCAL ? "local" : "remote" ), channel, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_SR_REG], tmp );
-#endif
-
- stat->reserved0 = ( tmp & 0xffffff00 ) >> 8;
- stat->lme = ( tmp & 0x00000080 ) >> 7;
- stat->reserved1 = ( tmp & 0x00000060 ) >> 5;
- stat->pe = ( tmp & 0x00000010 ) >> 4;
- stat->reserved2 = ( tmp & 0x00000008 ) >> 3;
- stat->cb = ( tmp & 0x00000004 ) >> 2;
- stat->eosi = ( tmp & 0x00000002 ) >> 1;
- stat->eocai = ( tmp & 0x00000001 );
-
- return DMASUCCESS;
-}
-
-/**************************************************************
- * function: DMA_Get_Mode
- *
- * description: return the content of mode register of the
- * given DMA channel
- *
- * if error, return DMAINVALID, otherwise return
- * DMASUCCESS
- **************************************************************/
-static
-DMAStatus DMA_Get_Mode( LOCATION host, unsigned eumbbar, unsigned int channel, DMA_MR *mode )
-{
- unsigned int tmp;
- if ( channel != 0 && channel != 1 || mode == 0 )
- {
- return DMAINVALID;
- }
-
- tmp = load_runtime_reg( eumbbar, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_MR_REG] );
-
-#ifdef DMADBG0
- PRINT( "%s(%d): %s DMA %d (0x%08x) mode = 0x%08x\n", __FILE__, __LINE__,
- ( host == LOCAL ? "local" : "remote" ), channel, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_MR_REG], tmp );
-#endif
-
- mode->reserved0 = (tmp & 0xfff00000) >> 20;
- mode->irqs = (tmp & 0x00080000) >> 19;
- mode->pde = (tmp & 0x00040000) >> 18;
- mode->dahts = (tmp & 0x00030000) >> 16;
- mode->sahts = (tmp & 0x0000c000) >> 14;
- mode->dahe = (tmp & 0x00002000) >> 13;
- mode->sahe = (tmp & 0x00001000) >> 12;
- mode->prc = (tmp & 0x00000c00) >> 10;
- mode->reserved1 = (tmp & 0x00000200) >> 9;
- mode->eie = (tmp & 0x00000100) >> 8;
- mode->eotie = (tmp & 0x00000080) >> 7;
- mode->reserved2 = (tmp & 0x00000070) >> 4;
- mode->dl = (tmp & 0x00000008) >> 3;
- mode->ctm = (tmp & 0x00000004) >> 2;
- mode->cc = (tmp & 0x00000002) >> 1;
- mode->cs = (tmp & 0x00000001);
-
- return DMASUCCESS;
-}
-
-/**************************************************************
- * function: DMA_Set_Mode
- *
- * description: Set a new mode to a given DMA channel
- *
- * note: It is not a good idea of changing the DMA mode during
- * the middle of a transaction.
- **************************************************************/
-static
-DMAStatus DMA_Set_Mode( LOCATION host, unsigned eumbbar, unsigned int channel, DMA_MR mode )
-{
- unsigned int tmp;
- if ( channel != 0 && channel != 1 )
- {
- return DMAINVALID;
- }
-
- tmp = ( mode.reserved0 & 0xfff ) << 20;
- tmp |= ( ( mode.irqs & 0x1 ) << 19);
- tmp |= ( ( mode.pde & 0x1 ) << 18 );
- tmp |= ( ( mode.dahts & 0x3 ) << 16 );
- tmp |= ( ( mode.sahts & 0x3 ) << 14 );
- tmp |= ( ( mode.dahe & 0x1 ) << 13 );
- tmp |= ( ( mode.sahe & 0x1 ) << 12 );
- tmp |= ( ( mode.prc & 0x3 ) << 10 );
- tmp |= ( ( mode.reserved1 & 0x1 ) << 9 );
- tmp |= ( ( mode.eie & 0x1 ) << 8 );
- tmp |= ( ( mode.eotie & 0x1 ) << 7 );
- tmp |= ( ( mode.reserved2 & 0x7 ) << 4 );
- tmp |= ( ( mode.dl & 0x1 ) << 3 );
- tmp |= ( ( mode.ctm & 0x1 ) << 2 );
- tmp |= ( ( mode.cc & 0x1 ) << 1 ) ;
- tmp |= ( mode.cs & 0x1 );
-
- store_runtime_reg( eumbbar, dma_reg_tb[host][channel*NUM_DMA_REG + DMA_MR_REG], tmp );
- return DMASUCCESS;
-}
-
-/************************************************************
- * function: DMA_Start
- *
- * description: start a given DMA channel transaction
- * return DMASUCCESS if success otherwise return
- * DMAStatus value
- *
- * note: this function will clear DMA_MR(CC) first, then
- * set DMA_MR(CC).
- ***********************************************************/
-static
-DMAStatus DMA_Start( LOCATION host, unsigned int eumbbar, unsigned int channel )
-{
- DMA_SR stat;
- unsigned int mode;
-
- if ( channel != 0 && channel != 1 )
- {
- return DMAINVALID;
- }
-
- if ( DMA_Get_Stat( host, eumbbar, channel, &stat ) != DMASUCCESS )
- {
- return DMAINVALID;
- }
-
- if ( stat.cb == 1 )
- {
- /* DMA is not free */
- return DMACHNBUSY;
- }
-
- mode = load_runtime_reg( eumbbar, dma_reg_tb[host][channel*NUM_DMA_REG + DMA_MR_REG] );
- /* clear DMA_MR(CS) */
- mode &= 0xfffffffe;
- store_runtime_reg( eumbbar, dma_reg_tb[host][channel*NUM_DMA_REG + DMA_MR_REG], mode );
-
- /* set DMA_MR(CS) */
- mode |= CS;
- store_runtime_reg( eumbbar, dma_reg_tb[host][channel*NUM_DMA_REG + DMA_MR_REG], mode );
- return DMASUCCESS;
-}
-
-/***********************************************************
- * function: DMA_Halt
- *
- * description: halt the current dma transaction on the specified
- * channel.
- * return DMASUCCESS if success otherwise return DMAINVALID
- *
- * note: if the specified DMA channel is idle, nothing happens
- *************************************************************/
-static
-DMAStatus DMA_Halt( LOCATION host, unsigned int eumbbar, unsigned int channel )
-{
- unsigned int mode;
- if ( channel != 0 && channel != 1 )
- {
- return DMAINVALID;
- }
-
- mode = load_runtime_reg( eumbbar, dma_reg_tb[host][channel*NUM_DMA_REG + DMA_MR_REG]);
-
- /* clear DMA_MR(CS) */
- mode &= 0xfffffffe;
- store_runtime_reg(eumbbar, dma_reg_tb[host][channel*NUM_DMA_REG + DMA_MR_REG], mode );
- return DMASUCCESS;
-}
-
-/*************************************************************
- * function: DMA_Chn_Cnt
- *
- * description: set the DMA_MR(CC) bit for a given channel
- * that is in chaining mode.
- * return DMASUCCESS if successfule, otherwise return
- * DMAINVALID.
- *
- * note: if the given channel is not in chaining mode, nothing
- * happen.
- *
- *************************************************************/
-static
-DMAStatus DMA_Chn_Cnt( LOCATION host, unsigned int eumbbar, unsigned int channel )
-{
- DMA_MR mode;
- if ( channel != 0 && channel != 1 )
- {
- return DMAINVALID;
- }
-
- if ( DMA_Get_Mode( host, eumbbar, channel, &mode ) != DMASUCCESS )
- {
- return DMAINVALID;
- }
-
- if ( mode.ctm == 0 )
- {
- /* either illegal mode or not chaining mode */
- return DMAINVALID;
- }
-
- mode.cc = 1;
- return DMA_Set_Mode( host, eumbbar, channel, mode );
-}
-
-/**************************************************************
- * function: DMA_Bld_Desp
- *
- * description: set current descriptor address register
- * according to the desp for a given channel
- *
- * if the given channel is busy return DMACHNBUSY
- * and no change made, otherwise return DMASUCCESS.
- *
- * note:
- **************************************************************/
-static
-DMAStatus DMA_Bld_Desp( LOCATION host,
- unsigned int eumbbar,
- unsigned int channel,
- DMA_CDAR desp )
-{
- DMA_SR status;
- unsigned int temp;
-
- if ( channel != 0 && channel != 1 )
- {
- /* channel number out of range */
- return DMAINVALID;
- }
-
- if ( DMA_Get_Stat( host, eumbbar, channel, &status ) != DMASUCCESS )
- {
- return DMAINVALID;
- }
-
- if ( status.cb == 1 )
- {
- /* channel busy */
- return DMACHNBUSY;
- }
-
- temp = ( desp.cda & 0x7ffffff ) << 5;
- temp |= (( desp.snen & 0x1 ) << 4 );
- temp |= (( desp.eosie & 0x1 ) << 3 );
- temp |= (( desp.ctt & 0x3 ) << 1 );
- temp |= ( desp.eotd & 0x1 );
-
- store_runtime_reg( eumbbar, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_CDAR_REG], temp );
-
-#ifdef DMADBG0
- PRINT( "%s(%d): %s DMA %d (0x%08x) cdar := 0x%08x\n", __FILE__, __LINE__,
- ( host == LOCAL ? "local" : "remote" ), channel, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_CDAR_REG], temp );
-#endif
-
- return DMASUCCESS;
-}
-
-/**************************************************************
- * function: DMA_Poke_Desp
- *
- * description: poke the current descriptor address register
- * for a given channel
- *
- * return DMASUCCESS if no error
- *
- * note: Due to the undeterministic parallellism of DMA operation,
- * the value returned by this function shall be taken as
- * the most recently used descriptor when the last time
- * DMA starts a chaining mode operation.
- **************************************************************/
-static
-DMAStatus DMA_Poke_Desp( LOCATION host,
- unsigned int eumbbar,
- unsigned int channel,
- DMA_CDAR *desp )
-{
- unsigned int cdar;
- if ( channel != 0 && channel != 1 || desp == 0 )
- {
- return DMAINVALID;
- }
-
- cdar = load_runtime_reg( eumbbar, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_CDAR_REG] );
-
-#ifdef DMADBG0
- PRINT( "%s(%d): %s DMA %d (0x%08x) cdar : 0x%08x\n", __FILE__, __LINE__,
- ( host == LOCAL ? "local" : "remote" ), channel, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_CDAR_REG], cdar );
-#endif
-
-
- desp->cda = ( cdar & 0xffffffe0 ) >> 5;
- desp->snen = ( cdar & 0x00000010 ) >> 4;
- desp->eosie = ( cdar & 0x00000008 ) >> 3;
- desp->ctt = ( cdar & 0x00000006 ) >> 1;
- desp->eotd = ( cdar & 0x00000001 );
-
- return DMASUCCESS;
-}
-
-/**************************************************************
- * function: DMA_Bld_Curr
- *
- * description: set current src, dest, byte count registers
- * according to the desp for a given channel
- * return DMASUCCESS if no error.
- *
- * note:
- **************************************************************/
-static
-DMAStatus DMA_Bld_Curr( LOCATION host,
- unsigned int eumbbar,
- unsigned int channel,
- DMA_CURR desp )
-{
- DMA_SR status;
- if ( channel != 0 && channel != 1 )
- {
- /* channel number out of range */
- return DMAINVALID;
- }
-
- if ( DMA_Get_Stat( host, eumbbar, channel, &status ) != DMASUCCESS )
- {
- return DMAINVALID;
- }
-
- if ( status.cb == 1 )
- {
- /* channel busy */
- return DMACHNBUSY;
- }
-
- desp.byte_cnt &= 0x03ffffff; /* upper 6-bits are 0s */
-
- store_runtime_reg( eumbbar, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_SAR_REG], desp.src_addr );
-#ifdef DMADBG0
- PRINT( "%s(%d): %s DMA %d (0x%08x) src := 0x%08x\n", __FILE__, __LINE__,
- ( host == LOCAL ? "local" : "remote" ), channel, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_CDAR_REG], desp.src_addr );
-#endif
-
- store_runtime_reg( eumbbar, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_DAR_REG], desp.dest_addr );
-#ifdef DMADBG0
- PRINT( "%s(%d): %s DMA %d (0x%08x) dest := 0x%08x\n", __FILE__, __LINE__,
- ( host == LOCAL ? "local" : "remote" ), channel, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_CDAR_REG], desp.dest_addr );
-#endif
-
- store_runtime_reg( eumbbar, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_BCR_REG], desp.byte_cnt );
-#ifdef DMADBG0
- PRINT( "%s(%d): %s DMA %d (0x%08x) count := 0x%08x\n", __FILE__, __LINE__,
- ( host == LOCAL ? "local" : "remote" ), channel, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_CDAR_REG], desp.byte_cnt );
-#endif
-
-
- return DMASUCCESS;
-
-}
-
-/**************************************************************
- * function: DMA_Poke_Curr
- *
- * description: poke the current src, dest, byte count registers
- * for a given channel.
- *
- * return DMASUCCESS if no error
- *
- * note: Due to the undeterministic parallelism, in chaining
- * mode, the value returned by this function shall
- * be taken as reference when the query is made rather
- * than the absolute snapshot when the value is returned.
- **************************************************************/
-static
-DMAStatus DMA_Poke_Curr( LOCATION host,
- unsigned int eumbbar,
- unsigned int channel,
- DMA_CURR* desp )
-{
- if ( channel != 0 && channel != 1 || desp == 0 )
- {
- return DMAINVALID;
- }
-
- desp->src_addr = load_runtime_reg( eumbbar, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_SAR_REG] );
-#ifdef DMADBG0
- PRINT( "%s(%d): %s DMA %d (0x%08x) src : 0x%08x\n", __FILE__, __LINE__,
- ( host == LOCAL ? "local" : "remote" ), channel, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_CDAR_REG], desp->src_addr );
-#endif
-
- desp->dest_addr = load_runtime_reg( eumbbar, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_DAR_REG] );
-#ifdef DMADBG0
- PRINT( "%s(%d): %s DMA %d (0x%08x) dest : 0x%08x\n", __FILE__, __LINE__,
- ( host == LOCAL ? "local" : "remote" ), channel, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_CDAR_REG], desp->dest_addr );
-#endif
-
- desp->byte_cnt = load_runtime_reg( eumbbar, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_BCR_REG] );
-#ifdef DMADBG0
- PRINT( "%s(%d): %s DMA %d (0x%08x) count : 0x%08x\n", __FILE__, __LINE__,
- ( host == LOCAL ? "local" : "remote" ), channel, dma_reg_tb[host][channel*NUM_DMA_REG+DMA_CDAR_REG], desp->byte_cnt );
-#endif
-
-
- return DMASUCCESS;
-}
-
-/*****************************************************************
- * function: dma_error_func
- *
- * description: display the error information
- *
- * note: This seems like a highly convoluted way to handle messages,
- * but I'll leave it as it was in device.c when I moved it into the
- * DMA library source.
- ****************************************************************/
-static
-DMAStatus dma_error_func( unsigned int eumbbar, unsigned int chn, DMAStatus err)
-{
- unsigned char *msg[] =
- {
- "Local Memory Error",
- "PCI Error",
- "Channel Busy",
- "End-of-Segment Interrupt",
- "End-of-Chain/Direct Interrupt",
- };
-
- if ( err >= DMALMERROR && err <= DMAEOCAINT )
- {
- PRINT( "DMA Status: channel %d %s\n", chn, msg[err-DMASUCCESS-1] );
- }
-
- return err;
-
-}
-
-/*************************************************************
- * function: DMA_ISR
- *
- * description: DMA interrupt service routine
- * return DMAStatus value based on
- * the status
- *
- *************************************************************/
-static
-DMAStatus DMA_ISR( unsigned int eumbbar,
- unsigned int channel,
- DMAStatus (*lme_func)( unsigned int, unsigned int, DMAStatus ),
- DMAStatus (*pe_func) ( unsigned int, unsigned int, DMAStatus ),
- DMAStatus (*eosi_func)( unsigned int, unsigned int, DMAStatus ),
- DMAStatus (*eocai_func)(unsigned int, unsigned int, DMAStatus ))
-{
-
- DMA_SR stat;
- DMAStatus rval = DMANOEVENT;
- unsigned int temp;
-
- if ( channel != 0 && channel != 1 )
- {
- return DMAINVALID;
- }
-
- if ( DMA_Get_Stat( LOCAL, eumbbar, channel, &stat ) != DMASUCCESS )
- {
- return DMAINVALID;
- }
-
- if ( stat.lme == 1 )
- {
- /* local memory error */
- rval = DMALMERROR;
- if ( lme_func != 0 )
- {
- rval = (*lme_func)(eumbbar, channel, DMALMERROR );
- }
-
- }
- else if ( stat.pe == 1 )
- {
- /* PCI error */
- rval = DMAPERROR;
- if ( pe_func != 0 )
- {
- rval = (*pe_func)(eumbbar, channel, DMAPERROR );
- }
-
- }
- else if ( stat.eosi == 1 )
- {
- /* end-of-segment interrupt */
- rval = DMAEOSINT;
- if ( eosi_func != 0 )
- {
- rval = (*eosi_func)(eumbbar, channel, DMAEOSINT );
- }
- }
- else
- {
- /* End-of-chain/direct interrupt */
- rval = DMAEOCAINT;
- if ( eocai_func != 0 )
- {
- rval = (*eocai_func)(eumbbar, channel, DMAEOCAINT );
- }
- }
-
- temp = ( stat.reserved0 & 0xffffff ) << 8;
- temp |= ( ( stat.lme & 0x1 ) << 7 ); /* write one to clear */
- temp |= ( ( stat.reserved1 & 0x3 ) << 5 );
- temp |= ( ( stat.pe & 0x1 ) << 4 ); /* write one to clear */
- temp |= ( ( stat.reserved2 & 0x1 ) << 3 );
- temp |= ( ( stat.cb & 0x1 ) << 2 ); /* write one to clear */
- temp |= ( ( stat.eosi & 0x1 ) << 1 ); /* write one to clear */
- temp |= ( stat.eocai & 0x1 ); /* write one to clear */
-
- store_runtime_reg( eumbbar, dma_reg_tb[LOCAL][channel*NUM_DMA_REG + DMA_SR_REG], temp );
-
-#ifdef DMADBG0
- PRINT( "%s(%d): DMA channel %d SR := 0x%08x\n", __FILE__, __LINE__, channel, temp );
-#endif
-
- return rval;
-}
diff --git a/cpu/mpc824x/drivers/dma/dma2.S b/cpu/mpc824x/drivers/dma/dma2.S
deleted file mode 100644
index ccbc226..0000000
--- a/cpu/mpc824x/drivers/dma/dma2.S
+++ /dev/null
@@ -1,42 +0,0 @@
-/**************************************
- *
- * copyright @ Motorola, 1999
- *
- **************************************/
-
-/**********************************************************
- * function: load_runtime_reg
- *
- * input: r3 - value of eumbbar
- * r4 - register offset in embedded utility space
- *
- * output: r3 - register content
- **********************************************************/
- .text
- .align 2
- .global load_runtime_reg
-
-load_runtime_reg:
-
- lwbrx r3,r4,r3
- sync
-
- bclr 20, 0
-
-/****************************************************************
- * function: store_runtime_reg
- *
- * input: r3 - value of eumbbar
- * r4 - register offset in embedded utility space
- * r5 - new value to be stored
- *
- ****************************************************************/
- .text
- .align 2
- .global store_runtime_reg
-store_runtime_reg:
-
- stwbrx r5, r4, r3
- sync
-
- bclr 20,0
diff --git a/cpu/mpc824x/drivers/dma/dma_export.h b/cpu/mpc824x/drivers/dma/dma_export.h
deleted file mode 100644
index 471e488..0000000
--- a/cpu/mpc824x/drivers/dma/dma_export.h
+++ /dev/null
@@ -1,100 +0,0 @@
-#ifndef DMA_EXPORT_H
-#define DMA_EXPORT_H
-
-/****************************************************
- * $Id:
- *
- * Copyright Motorola 1999
- *
- * $Log:
- *
- ****************************************************/
-
-/* These are the defined return values for the DMA_* functions.
- * Any non-zero value indicates failure. Failure modes can be added for
- * more detailed error reporting.
- */
-typedef enum _dma_status
-{
- DMA_SUCCESS = 0,
- DMA_ERROR,
-} DMA_Status;
-
-/* These are the defined channel transfer types. */
-typedef enum _dma_transfer_types
-{
- DMA_M2M = 0, /* local memory to local memory */
- DMA_M2P = 1, /* local memory to PCI */
- DMA_P2M = 2, /* PCI to local memory */
- DMA_P2P = 3, /* PCI to PCI */
-} DMA_TRANSFER_TYPE;
-
-typedef enum _dma_interrupt_steer
-{
- DMA_INT_STEER_LOCAL = 0, /* steer DMA int to local processor */
- DMA_INT_STEER_PCI = 1, /* steer DMA int to PCI bus through INTA_ */
-} DMA_INTERRUPT_STEER;
-
-typedef enum _dma_channel
-{
- DMA_CHN_0 = 0, /* kahlua has two dma channels: 0 and 1 */
- DMA_CHN_1 = 1,
-} DMA_CHANNEL;
-
-typedef enum _dma_snoop_mode
-{
- DMA_SNOOP_DISABLE = 0,
- DMA_SNOOP_ENABLE = 1,
-} DMA_SNOOP_MODE;
-
-/******************** App. API ********************
- * The application API is for user level application
- * to use the functionality provided by DMA driver.
- * This is a "generic" DMA interface, it should contain
- * nothing specific to the Kahlua implementation.
- * Only the generic functions are exported by the library.
- *
- * Note: Its App.s responsibility to swap the data
- * byte. In our API, we currently transfer whatever
- * we are given - Big/Little Endian. This could
- * become part of the DMA config, though.
- **************************************************/
-
-
-/* Initialize DMA unit with the following:
- * optional pointer to application layer print function
- *
- * These parameters may be added:
- * ???
- * Interrupt enables, modes, etc. are set for each transfer.
- *
- * This function must be called before DMA unit can be used.
- */
-extern DMA_Status DMA_Initialize(
- int (*app_print_function)(char *,...)); /* pointer to optional "printf"
- * provided by application
- */
-
-/* Perform the DMA transfer, only direct mode is currently implemented.
- * At this point, I think it would be better to define a different
- * function for chaining mode.
- * Also, I'm not sure if it is appropriate to have the "generic" API
- * accept snoop and int_steer parameters. The DINK user interface allows
- * them, so for now I'll leave them.
- *
- * int_steer controls DMA interrupt steering to PCI or local processor
- * type is the type of transfer: M2M, M2P, P2M, P2P
- * source is the source address of the data
- * dest is the destination address of the data
- * len is the length of data to transfer
- * channel is the DMA channel to use for the transfer
- * snoop is the snoop enable control
- */
-extern DMA_Status DMA_direct_transfer( DMA_INTERRUPT_STEER int_steer,
- DMA_TRANSFER_TYPE type,
- unsigned int source,
- unsigned int dest,
- unsigned int len,
- DMA_CHANNEL channel,
- DMA_SNOOP_MODE snoop);
-#endif
diff --git a/cpu/mpc824x/drivers/dma_export.h b/cpu/mpc824x/drivers/dma_export.h
deleted file mode 100644
index 471e488..0000000
--- a/cpu/mpc824x/drivers/dma_export.h
+++ /dev/null
@@ -1,100 +0,0 @@
-#ifndef DMA_EXPORT_H
-#define DMA_EXPORT_H
-
-/****************************************************
- * $Id:
- *
- * Copyright Motorola 1999
- *
- * $Log:
- *
- ****************************************************/
-
-/* These are the defined return values for the DMA_* functions.
- * Any non-zero value indicates failure. Failure modes can be added for
- * more detailed error reporting.
- */
-typedef enum _dma_status
-{
- DMA_SUCCESS = 0,
- DMA_ERROR,
-} DMA_Status;
-
-/* These are the defined channel transfer types. */
-typedef enum _dma_transfer_types
-{
- DMA_M2M = 0, /* local memory to local memory */
- DMA_M2P = 1, /* local memory to PCI */
- DMA_P2M = 2, /* PCI to local memory */
- DMA_P2P = 3, /* PCI to PCI */
-} DMA_TRANSFER_TYPE;
-
-typedef enum _dma_interrupt_steer
-{
- DMA_INT_STEER_LOCAL = 0, /* steer DMA int to local processor */
- DMA_INT_STEER_PCI = 1, /* steer DMA int to PCI bus through INTA_ */
-} DMA_INTERRUPT_STEER;
-
-typedef enum _dma_channel
-{
- DMA_CHN_0 = 0, /* kahlua has two dma channels: 0 and 1 */
- DMA_CHN_1 = 1,
-} DMA_CHANNEL;
-
-typedef enum _dma_snoop_mode
-{
- DMA_SNOOP_DISABLE = 0,
- DMA_SNOOP_ENABLE = 1,
-} DMA_SNOOP_MODE;
-
-/******************** App. API ********************
- * The application API is for user level application
- * to use the functionality provided by DMA driver.
- * This is a "generic" DMA interface, it should contain
- * nothing specific to the Kahlua implementation.
- * Only the generic functions are exported by the library.
- *
- * Note: Its App.s responsibility to swap the data
- * byte. In our API, we currently transfer whatever
- * we are given - Big/Little Endian. This could
- * become part of the DMA config, though.
- **************************************************/
-
-
-/* Initialize DMA unit with the following:
- * optional pointer to application layer print function
- *
- * These parameters may be added:
- * ???
- * Interrupt enables, modes, etc. are set for each transfer.
- *
- * This function must be called before DMA unit can be used.
- */
-extern DMA_Status DMA_Initialize(
- int (*app_print_function)(char *,...)); /* pointer to optional "printf"
- * provided by application
- */
-
-/* Perform the DMA transfer, only direct mode is currently implemented.
- * At this point, I think it would be better to define a different
- * function for chaining mode.
- * Also, I'm not sure if it is appropriate to have the "generic" API
- * accept snoop and int_steer parameters. The DINK user interface allows
- * them, so for now I'll leave them.
- *
- * int_steer controls DMA interrupt steering to PCI or local processor
- * type is the type of transfer: M2M, M2P, P2M, P2P
- * source is the source address of the data
- * dest is the destination address of the data
- * len is the length of data to transfer
- * channel is the DMA channel to use for the transfer
- * snoop is the snoop enable control
- */
-extern DMA_Status DMA_direct_transfer( DMA_INTERRUPT_STEER int_steer,
- DMA_TRANSFER_TYPE type,
- unsigned int source,
- unsigned int dest,
- unsigned int len,
- DMA_CHANNEL channel,
- DMA_SNOOP_MODE snoop);
-#endif
diff --git a/cpu/mpc824x/drivers/i2o.h b/cpu/mpc824x/drivers/i2o.h
deleted file mode 100644
index c47253d..0000000
--- a/cpu/mpc824x/drivers/i2o.h
+++ /dev/null
@@ -1,344 +0,0 @@
-#ifndef I2O_H
-#define I2O_H
-/*********************************************************
- *
- * copyright @ Motorola, 1999
- *********************************************************/
-
-#define I2O_REG_OFFSET 0x0004
-
-#define PCI_CFG_CLA 0x0B
-#define PCI_CFG_SCL 0x0A
-#define PCI_CFG_PIC 0x09
-
-#define I2O_IMR0 0x0050
-#define I2O_IMR1 0x0054
-#define I2O_OMR0 0x0058
-#define I2O_OMR1 0x005C
-
-#define I2O_ODBR 0x0060
-#define I2O_IDBR 0x0068
-
-#define I2O_OMISR 0x0030
-#define I2O_OMIMR 0x0034
-#define I2O_IMISR 0x0100
-#define I2O_IMIMR 0x0104
-
-/* accessable to PCI master but local processor */
-#define I2O_IFQPR 0x0040
-#define I2O_OFQPR 0x0044
-
-/* accessable to local processor */
-#define I2O_IFHPR 0x0120
-#define I2O_IFTPR 0x0128
-#define I2O_IPHPR 0x0130
-#define I2O_IPTPR 0x0138
-#define I2O_OFHPR 0x0140
-#define I2O_OFTPR 0x0148
-#define I2O_OPHPR 0x0150
-#define I2O_OPTPR 0x0158
-#define I2O_MUCR 0x0164
-#define I2O_QBAR 0x0170
-
-#define I2O_NUM_MSG 2
-
-typedef enum _i2o_status
-{
- I2OSUCCESS = 0,
- I2OINVALID,
- I2OMSGINVALID,
- I2ODBINVALID,
- I2OQUEINVALID,
- I2OQUEEMPTY,
- I2OQUEFULL,
- I2ONOEVENT,
-} I2OSTATUS;
-
-typedef enum _queue_size
-{
- QSIZE_4K = 0x02,
- QSIZE_8K = 0x04,
- QSIZE_16K = 0x08,
- QSIZE_32K = 0x10,
- QSIZe_64K = 0x20,
-} QUEUE_SIZE;
-
-typedef enum _location
-{
- LOCAL = 0, /* used by local processor to access its own on board device,
- local processor's eumbbar is required */
- REMOTE, /* used by PCI master to access the devices on its PCI device,
- device's pcsrbar is required */
-} LOCATION;
-
-/* door bell */
-typedef enum _i2o_in_db
-{
- IN_DB = 1,
- MC, /* machine check */
-} I2O_IN_DB;
-
-/* I2O PCI configuration identification */
-typedef struct _i2o_iop
-{
- unsigned int base_class : 8;
- unsigned int sub_class : 8;
- unsigned int prg_code : 8;
-} I2OIOP;
-
-/* I2O Outbound Message Interrupt Status Register */
-typedef struct _i2o_om_stat
-{
- unsigned int rsvd0 : 26;
- unsigned int opqi : 1;
- unsigned int rsvd1 : 1;
- unsigned int odi : 1;
- unsigned int rsvd2 : 1;
- unsigned int om1i : 1;
- unsigned int om0i : 1;
-} I2OOMSTAT;
-
-/* I2O inbound Message Interrupt Status Register */
-typedef struct _i2o_im_stat
-{
- unsigned int rsvd0 : 23;
- unsigned int ofoi : 1;
- unsigned int ipoi : 1;
- unsigned int rsvd1 : 1;
- unsigned int ipqi : 1;
- unsigned int mci : 1;
- unsigned int idi : 1;
- unsigned int rsvd2 : 1;
- unsigned int im1i : 1;
- unsigned int im0i : 1;
-} I2OIMSTAT;
-
-/**
- Enable the interrupt associated with in/out bound msg
-
- Inbound message interrupt generated by PCI master and serviced by local processor
- local processor needs to enable its inbound interrupts it wants to handle (LOCAL)
-
- Outbound message interrupt generated by local processor and serviced by PCI master
- PCI master needs to enable the devices' outbound interrupts it wants to handle (REMOTE)
- **/
-extern I2OSTATUS I2OMsgEnable( LOCATION, /* REMOTE/LOCAL */
- unsigned int base, /* pcsrbar/eumbbar */
- unsigned char n ); /* b'1' - msg 0
- * b'10'- msg 1
- * b'11'- both
- */
-
-/**
- Disable the interrupt associated with in/out bound msg
-
- local processor needs to disable its inbound interrupts it is not interested (LOCAL)
-
- PCI master needs to disable outbound interrupts of devices it is not interested (REMOTE)
- **/
-extern I2OSTATUS I2OMsgDisable( LOCATION, /* REMOTE/LOCAL */
- unsigned int base, /* pcsrbar/eumbbar */
- unsigned char n ); /* b'1' - msg 0
- * b'10'- msg 1
- * b'11'- both
- */
-
-/**
- Read the msg register either from local inbound msg 0/1,
- or an outbound msg 0/1 of devices.
-
- If it is not local, pcsrbar must be passed to the function.
- Otherwise eumbbar is passed.
-
- If it is remote, outbound msg of the device is read.
- Otherwise local inbound msg is read.
- **/
-extern I2OSTATUS I2OMsgGet ( LOCATION, /* REMOTE/LOCAL */
- unsigned int base, /*pcsrbar/eumbbar */
- unsigned int n, /* 0 or 1 */
- unsigned int *msg );
-
-/**
- Write to nth Msg register either on local outbound msg 0/1,
- or aninbound msg 0/1 of devices
-
- If it is not local, pcsrbar must be passed to the function.
- Otherwise eumbbar is passed.
-
- If it is remote, inbound msg on the device is written.
- Otherwise local outbound msg is written.
- **/
-extern I2OSTATUS I2OMsgPost( LOCATION, /* REMOTE/LOCAL */
- unsigned int base, /*pcsrbar/eumbbar */
- unsigned int n, /* 0 or 1 */
- unsigned int msg );
-
-/**
- Enable the In/Out DoorBell Interrupt
-
- InDoorBell interrupt is generated by PCI master and serviced by local processor
- local processor needs to enable its inbound doorbell interrupts it wants to handle
-
- OutDoorbell interrupt is generated by local processor and serviced by PCI master
- PCI master needs to enable outbound doorbell interrupts of the devices it wants to handle
- **/
-extern I2OSTATUS I2ODBEnable( LOCATION, /* REMOTE/LOCAL */
- unsigned int base, /* pcsrbar/eumbbar */
- unsigned int in_db );/* when LOCAL, I2O_IN_DB, MC, I2O_IN_DB|MC */
-
-/**
- Disable the In/Out DoorBell Interrupt
-
- local processor needs to disable its inbound doorbell interrupts it is not interested
-
- PCI master needs to disable outbound doorbell interrupts of devices it is not interested
-
- **/
-extern I2OSTATUS I2ODBDisable( LOCATION, /* REMOTE/LOCAL */
- unsigned int base, /* pcsrbar/eumbbar */
- unsigned int in_db ); /* when LOCAL, I2O_IN_DB, MC, I2O_IN_DB|MC */
-
-/**
- Read a local indoorbell register, or an outdoorbell of devices.
- Reading a doorbell register, the register will be cleared.
-
- If it is not local, pcsrbar must be passed to the function.
- Otherwise eumbbar is passed.
-
- If it is remote, outdoorbell register on the device is read.
- Otherwise local in doorbell is read
- **/
-extern unsigned int I2ODBGet( LOCATION, /* REMOTE/LOCAL */
- unsigned int base); /* pcsrbar/eumbbar */
-
-/**
- Write to a local outdoorbell register, or an indoorbell register of devices.
-
- If it is not local, pcsrbar must be passed to the function.
- Otherwise eumbbar is passed.
-
- If it is remote, in doorbell register on the device is written.
- Otherwise local out doorbell is written
- **/
-extern void I2ODBPost( LOCATION, /* REMOTE/LOCAL */
- unsigned int base, /* pcsrbar/eumbbar */
- unsigned int msg ); /* in / out */
-
-/**
- Read the outbound msg unit interrupt status of devices. Reading an interrupt status register,
- the register will be cleared.
-
- The outbound interrupt status is AND with the outbound
- interrupt mask. The result is returned.
-
- PCI master must pass the pcsrbar to the function.
- **/
-extern I2OSTATUS I2OOutMsgStatGet( unsigned int pcsrbar, I2OOMSTAT * );
-
-/**
- Read the inbound msg unit interrupt status. Reading an interrupt status register,
- the register will be cleared.
-
- The inbound interrupt status is AND with the inbound
- interrupt mask. The result is returned.
-
- Local process must pass its eumbbar to the function.
-**/
-extern I2OSTATUS I2OInMsgStatGet( unsigned int eumbbar, I2OIMSTAT * );
-
-/**
- Configure the I2O FIFO, including QBAR, IFHPR/IFTPR,IPHPR/IPTPR,OFHPR/OFTPR, OPHPR/OPTPR,
- MUCR.
- **/
-extern I2OSTATUS I2OFIFOInit( unsigned int eumbbar,
- QUEUE_SIZE,
- unsigned int qba);/* queue base address that must be aligned at 1M */
-/**
- Enable the circular queue
- **/
-extern I2OSTATUS I2OFIFOEnable( unsigned int eumbbar );
-
-/**
- Disable the circular queue
- **/
-extern void I2OFIFODisable( unsigned int eumbbar );
-
-/**
- Enable the circular queue interrupt
- PCI master enables outbound FIFO interrupt of device
- Device enables its inbound FIFO interrupt
- **/
-extern void I2OFIFOIntEnable( LOCATION, unsigned int base );
-
-/**
- Disable the circular queue interrupt
- PCI master disables outbound FIFO interrupt of device
- Device disables its inbound FIFO interrupt
- **/
-extern void I2OFIFOIntDisable( LOCATION, unsigned int base );
-
-/**
- Enable the circular queue overflow interrupt
- **/
-extern void I2OFIFOOverflowIntEnable( unsigned int eumbbar );
-
-/**
- Disable the circular queue overflow interrupt
- **/
-extern void I2OFIFOOverflowIntDisable( unsigned int eumbbar );
-
-/**
- Allocate a free msg frame from free FIFO.
-
- PCI Master allocates a free msg frame through inbound queue port of device(IFQPR)
- while local processor allocates a free msg frame from outbound free queue(OFTPR)
-
- Unless both free queues are initialized, allocating a free MF will return 0xffffffff
- **/
-extern I2OSTATUS I2OFIFOAlloc( LOCATION,
- unsigned int base,
- void **pMsg);
-/**
- Free a used msg frame back to free queue
- PCI Master frees a MFA through outbound queue port of device(OFQPR)
- while local processor frees a MFA into its inbound free queue(IFHPR)
-
- Used msg frame does not need to be recycled in the order they
- read
-
- This function has to be called by PCI master to initialize Inbound free queue
- and by device to initialize Outbound free queue before I2OFIFOAlloc can be used.
- **/
-extern I2OSTATUS I2OFIFOFree( LOCATION,
- unsigned int base,
- void *pMsg );
-
-/**
- Post a msg into FIFO
- PCI Master posts a msg through inbound queue port of device(IFQPR)
- while local processor post a msg into its outbound post queue(OPHPR)
-
- The total number of msg must be less than the max size of the queue
- Otherwise queue overflow interrupt will assert.
- **/
-extern I2OSTATUS I2OFIFOPost( LOCATION,
- unsigned int base,
- void *pMsg );
-
-/**
- Read a msg from FIFO
- PCI Master reads a msg through outbound queue port of device(OFQPR)
- while local processor reads a msg from its inbound post queue(IPTPR)
- **/
-extern I2OSTATUS I2OFIFOGet( LOCATION,
- unsigned int base,
- void **pMsg );
-
-/**
- Get the I2O PCI configuration identification register
- **/
-extern I2OSTATUS I2OPCIConfigGet( LOCATION,
- unsigned int base,
- I2OIOP *);
-
-#endif
diff --git a/cpu/mpc824x/drivers/i2o/Makefile b/cpu/mpc824x/drivers/i2o/Makefile
deleted file mode 100644
index 3f5ca26..0000000
--- a/cpu/mpc824x/drivers/i2o/Makefile
+++ /dev/null
@@ -1,84 +0,0 @@
-##########################################################################
-#
-# Copyright Motorola, Inc. 1997
-# ALL RIGHTS RESERVED
-#
-# You are hereby granted a copyright license to use, modify, and
-# distribute the SOFTWARE so long as this entire notice is retained
-# without alteration in any modified and/or redistributed versions,
-# and that such modified versions are clearly identified as such.
-# No licenses are granted by implication, estoppel or otherwise under
-# any patents or trademarks of Motorola, Inc.
-#
-# The SOFTWARE is provided on an "AS IS" basis and without warranty.
-# To the maximum extent permitted by applicable law, MOTOROLA DISCLAIMS
-# ALL WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING IMPLIED
-# WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
-# PURPOSE AND ANY WARRANTY AGAINST INFRINGEMENT WITH
-# REGARD TO THE SOFTWARE (INCLUDING ANY MODIFIED VERSIONS
-# THEREOF) AND ANY ACCOMPANYING WRITTEN MATERIALS.
-#
-# To the maximum extent permitted by applicable law, IN NO EVENT SHALL
-# MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER
-# (INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF
-# BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS
-# INFORMATION, OR OTHER PECUNIARY LOSS) ARISING OF THE USE OR
-# INABILITY TO USE THE SOFTWARE.
-#
-############################################################################
-TARGET = libi2o.a
-
-#DEBUG = -g
-DEBUG =
-LST = -Hanno -S
-OPTIM =
-CC = /risc/tools/pkgs/metaware/bin/hcppc
-CFLAGS = -Hnocopyr -c -Hsds -Hon=Char_default_unsigned -Hon=Char_is_rep -I../inc -I/risc/tools/pkgs/metaware/inc
-CCobj = $(CC) $(CFLAGS) $(DEBUG) $(OPTIM)
-PREP = $(CC) $(CFLAGS) -P
-
-# Assembler used to build the .s files (for the board version)
-
-ASOPT = -big_si -c
-ASDEBUG = -l -fm
-AS = /risc/tools/pkgs/metaware/bin/asppc
-
-# Linker to bring .o files together into an executable.
-
-LKOPT = -Bbase=0 -Qn -q -r
-LKCMD =
-LINK = /risc/tools/pkgs/metaware/bin/ldppc $(LKCMD) $(LKOPT)
-
-# DOS Utilities
-
-DEL = rm
-COPY = cp
-LIST = ls
-
-OBJECTS = i2o1.o i2o2.o
-
-all: $(TARGET)
-
-$(TARGET): $(OBJECTS)
- $(LINK) $(OBJECTS) -o $@
-
-objects: i2o1.o
-
-clean:
- $(DEL) -f *.o *.i *.map *.lst $(TARGET) $(OBJECTS)
-
-.s.o:
- $(DEL) -f $*.i
- $(PREP) -Hasmcpp $<
- $(AS) $(ASOPT) $*.i
-# $(AS) $(ASOPT) $(ASDEBUG) $*.i > $*.lst
-
-.c.o:
- $(CCobj) $<
-
-.c.s:
- $(CCobj) $(LST) $<
-
-i2o1.o: i2o.h i2o1.c
-
-i2o2.o: i2o.h i2o2.s
diff --git a/cpu/mpc824x/drivers/i2o/Makefile_pc b/cpu/mpc824x/drivers/i2o/Makefile_pc
deleted file mode 100644
index 6867f58..0000000
--- a/cpu/mpc824x/drivers/i2o/Makefile_pc
+++ /dev/null
@@ -1,90 +0,0 @@
-##########################################################################
-#
-# makefile_pc for use with PC mksnt tools dink32/drivers/i2o
-#
-# Copyright Motorola, Inc. 1997
-# ALL RIGHTS RESERVED
-#
-# You are hereby granted a copyright license to use, modify, and
-# distribute the SOFTWARE so long as this entire notice is retained
-# without alteration in any modified and/or redistributed versions,
-# and that such modified versions are clearly identified as such.
-# No licenses are granted by implication, estoppel or otherwise under
-# any patents or trademarks of Motorola, Inc.
-#
-# The SOFTWARE is provided on an "AS IS" basis and without warranty.
-# To the maximum extent permitted by applicable law, MOTOROLA DISCLAIMS
-# ALL WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING IMPLIED
-# WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
-# PURPOSE AND ANY WARRANTY AGAINST INFRINGEMENT WITH
-# REGARD TO THE SOFTWARE (INCLUDING ANY MODIFIED VERSIONS
-# THEREOF) AND ANY ACCOMPANYING WRITTEN MATERIALS.
-#
-# To the maximum extent permitted by applicable law, IN NO EVENT SHALL
-# MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER
-# (INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF
-# BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS
-# INFORMATION, OR OTHER PECUNIARY LOSS) ARISING OF THE USE OR
-# INABILITY TO USE THE SOFTWARE.
-#
-############################################################################
-TARGET = libi2o.a
-
-#DEBUG = -g
-DEBUG =
-LST = -Hanno -S
-OPTIM =
-CC = m:/old_tools/tools/hcppc/bin/hcppc
-CFLAGS = -Hnocopyr -c -Hsds -Hon=Char_default_unsigned -Hon=Char_is_rep -I../inc -I/risc/tools/pkgs/metaware/inc
-CCobj = $(CC) $(CFLAGS) $(DEBUG) $(OPTIM)
-PREP = $(CC) $(CFLAGS) -P
-
-# Assembler used to build the .s files (for the board version)
-
-ASOPT = -big_si -c
-ASDEBUG = -l -fm
-AS = m:/old_tools/tools/hcppc/bin/asppc
-
-# Linker to bring .o files together into an executable.
-
-LKOPT = -Bbase=0 -Qn -q -r
-LKCMD =
-LINK = m:/old_tools/tools/hcppc/bin/ldppc $(LKCMD) $(LKOPT)
-
-# DOS Utilities
-
-DEL = rm
-COPY = cp
-LIST = ls
-
-OBJECTS = i2o1.o i2o2.o
-
-all: $(TARGET)
-
-$(TARGET): $(OBJECTS)
- $(LINK) $(OBJECTS) -o $@
-
-objects: i2o1.o
-
-clean:
- $(DEL) -f *.o *.i *.map *.lst $(TARGET) $(OBJECTS)
-
-.s.o:
- $(DEL) -f $*.i
- $(PREP) -Hasmcpp $<
- $(AS) $(ASOPT) $*.i
-# $(AS) $(ASOPT) $(ASDEBUG) $*.i > $*.lst
-
-.c.o:
- $(CCobj) $<
-
-.c.s:
- $(CCobj) $(LST) $<
-
-i2o1.o: i2o.h i2o1.c
- $(CCobj) $<
-
-i2o2.o: i2o.h i2o2.s
- $(DEL) -f $*.i
- $(PREP) -Hasmcpp $<
- $(AS) $(ASOPT) $*.i
diff --git a/cpu/mpc824x/drivers/i2o/i2o.h b/cpu/mpc824x/drivers/i2o/i2o.h
deleted file mode 100644
index 71572b2..0000000
--- a/cpu/mpc824x/drivers/i2o/i2o.h
+++ /dev/null
@@ -1,345 +0,0 @@
-#ifndef I2O_H
-#define I2O_H
-/*********************************************************
- *
- * copyright @ Motorola, 1999
- *
- *********************************************************/
-
-#define I2O_REG_OFFSET 0x0004
-
-#define PCI_CFG_CLA 0x0B
-#define PCI_CFG_SCL 0x0A
-#define PCI_CFG_PIC 0x09
-
-#define I2O_IMR0 0x0050
-#define I2O_IMR1 0x0054
-#define I2O_OMR0 0x0058
-#define I2O_OMR1 0x005C
-
-#define I2O_ODBR 0x0060
-#define I2O_IDBR 0x0068
-
-#define I2O_OMISR 0x0030
-#define I2O_OMIMR 0x0034
-#define I2O_IMISR 0x0100
-#define I2O_IMIMR 0x0104
-
-/* accessable to PCI master but local processor */
-#define I2O_IFQPR 0x0040
-#define I2O_OFQPR 0x0044
-
-/* accessable to local processor */
-#define I2O_IFHPR 0x0120
-#define I2O_IFTPR 0x0128
-#define I2O_IPHPR 0x0130
-#define I2O_IPTPR 0x0138
-#define I2O_OFHPR 0x0140
-#define I2O_OFTPR 0x0148
-#define I2O_OPHPR 0x0150
-#define I2O_OPTPR 0x0158
-#define I2O_MUCR 0x0164
-#define I2O_QBAR 0x0170
-
-#define I2O_NUM_MSG 2
-
-typedef enum _i2o_status
-{
- I2OSUCCESS = 0,
- I2OINVALID,
- I2OMSGINVALID,
- I2ODBINVALID,
- I2OQUEINVALID,
- I2OQUEEMPTY,
- I2OQUEFULL,
- I2ONOEVENT,
-} I2OSTATUS;
-
-typedef enum _queue_size
-{
- QSIZE_4K = 0x02,
- QSIZE_8K = 0x04,
- QSIZE_16K = 0x08,
- QSIZE_32K = 0x10,
- QSIZe_64K = 0x20,
-} QUEUE_SIZE;
-
-typedef enum _location
-{
- LOCAL = 0, /* used by local processor to access its own on board device,
- local processor's eumbbar is required */
- REMOTE, /* used by PCI master to access the devices on its PCI device,
- device's pcsrbar is required */
-} LOCATION;
-
-/* door bell */
-typedef enum _i2o_in_db
-{
- IN_DB = 1,
- MC, /* machine check */
-} I2O_IN_DB;
-
-/* I2O PCI configuration identification */
-typedef struct _i2o_iop
-{
- unsigned int base_class : 8;
- unsigned int sub_class : 8;
- unsigned int prg_code : 8;
-} I2OIOP;
-
-/* I2O Outbound Message Interrupt Status Register */
-typedef struct _i2o_om_stat
-{
- unsigned int rsvd0 : 26;
- unsigned int opqi : 1;
- unsigned int rsvd1 : 1;
- unsigned int odi : 1;
- unsigned int rsvd2 : 1;
- unsigned int om1i : 1;
- unsigned int om0i : 1;
-} I2OOMSTAT;
-
-/* I2O inbound Message Interrupt Status Register */
-typedef struct _i2o_im_stat
-{
- unsigned int rsvd0 : 23;
- unsigned int ofoi : 1;
- unsigned int ipoi : 1;
- unsigned int rsvd1 : 1;
- unsigned int ipqi : 1;
- unsigned int mci : 1;
- unsigned int idi : 1;
- unsigned int rsvd2 : 1;
- unsigned int im1i : 1;
- unsigned int im0i : 1;
-} I2OIMSTAT;
-
-/**
- Enable the interrupt associated with in/out bound msg
-
- Inbound message interrupt generated by PCI master and serviced by local processor
- local processor needs to enable its inbound interrupts it wants to handle (LOCAL)
-
- Outbound message interrupt generated by local processor and serviced by PCI master
- PCI master needs to enable the devices' outbound interrupts it wants to handle (REMOTE)
- **/
-extern I2OSTATUS I2OMsgEnable( LOCATION, /* REMOTE/LOCAL */
- unsigned int base, /* pcsrbar/eumbbar */
- unsigned char n ); /* b'1' - msg 0
- * b'10'- msg 1
- * b'11'- both
- */
-
-/**
- Disable the interrupt associated with in/out bound msg
-
- local processor needs to disable its inbound interrupts it is not interested (LOCAL)
-
- PCI master needs to disable outbound interrupts of devices it is not interested (REMOTE)
- **/
-extern I2OSTATUS I2OMsgDisable( LOCATION, /* REMOTE/LOCAL */
- unsigned int base, /* pcsrbar/eumbbar */
- unsigned char n ); /* b'1' - msg 0
- * b'10'- msg 1
- * b'11'- both
- */
-
-/**
- Read the msg register either from local inbound msg 0/1,
- or an outbound msg 0/1 of devices.
-
- If it is not local, pcsrbar must be passed to the function.
- Otherwise eumbbar is passed.
-
- If it is remote, outbound msg of the device is read.
- Otherwise local inbound msg is read.
- **/
-extern I2OSTATUS I2OMsgGet ( LOCATION, /* REMOTE/LOCAL */
- unsigned int base, /*pcsrbar/eumbbar */
- unsigned int n, /* 0 or 1 */
- unsigned int *msg );
-
-/**
- Write to nth Msg register either on local outbound msg 0/1,
- or aninbound msg 0/1 of devices
-
- If it is not local, pcsrbar must be passed to the function.
- Otherwise eumbbar is passed.
-
- If it is remote, inbound msg on the device is written.
- Otherwise local outbound msg is written.
- **/
-extern I2OSTATUS I2OMsgPost( LOCATION, /* REMOTE/LOCAL */
- unsigned int base, /*pcsrbar/eumbbar */
- unsigned int n, /* 0 or 1 */
- unsigned int msg );
-
-/**
- Enable the In/Out DoorBell Interrupt
-
- InDoorBell interrupt is generated by PCI master and serviced by local processor
- local processor needs to enable its inbound doorbell interrupts it wants to handle
-
- OutDoorbell interrupt is generated by local processor and serviced by PCI master
- PCI master needs to enable outbound doorbell interrupts of the devices it wants to handle
- **/
-extern I2OSTATUS I2ODBEnable( LOCATION, /* REMOTE/LOCAL */
- unsigned int base, /* pcsrbar/eumbbar */
- unsigned int in_db );/* when LOCAL, I2O_IN_DB, MC, I2O_IN_DB|MC */
-
-/**
- Disable the In/Out DoorBell Interrupt
-
- local processor needs to disable its inbound doorbell interrupts it is not interested
-
- PCI master needs to disable outbound doorbell interrupts of devices it is not interested
-
- **/
-extern I2OSTATUS I2ODBDisable( LOCATION, /* REMOTE/LOCAL */
- unsigned int base, /* pcsrbar/eumbbar */
- unsigned int in_db ); /* when LOCAL, I2O_IN_DB, MC, I2O_IN_DB|MC */
-
-/**
- Read a local indoorbell register, or an outdoorbell of devices.
- Reading a doorbell register, the register will be cleared.
-
- If it is not local, pcsrbar must be passed to the function.
- Otherwise eumbbar is passed.
-
- If it is remote, outdoorbell register on the device is read.
- Otherwise local in doorbell is read
- **/
-extern unsigned int I2ODBGet( LOCATION, /* REMOTE/LOCAL */
- unsigned int base); /* pcsrbar/eumbbar */
-
-/**
- Write to a local outdoorbell register, or an indoorbell register of devices.
-
- If it is not local, pcsrbar must be passed to the function.
- Otherwise eumbbar is passed.
-
- If it is remote, in doorbell register on the device is written.
- Otherwise local out doorbell is written
- **/
-extern void I2ODBPost( LOCATION, /* REMOTE/LOCAL */
- unsigned int base, /* pcsrbar/eumbbar */
- unsigned int msg ); /* in / out */
-
-/**
- Read the outbound msg unit interrupt status of devices. Reading an interrupt status register,
- the register will be cleared.
-
- The outbound interrupt status is AND with the outbound
- interrupt mask. The result is returned.
-
- PCI master must pass the pcsrbar to the function.
- **/
-extern I2OSTATUS I2OOutMsgStatGet( unsigned int pcsrbar, I2OOMSTAT * );
-
-/**
- Read the inbound msg unit interrupt status. Reading an interrupt status register,
- the register will be cleared.
-
- The inbound interrupt status is AND with the inbound
- interrupt mask. The result is returned.
-
- Local process must pass its eumbbar to the function.
-**/
-extern I2OSTATUS I2OInMsgStatGet( unsigned int eumbbar, I2OIMSTAT * );
-
-/**
- Configure the I2O FIFO, including QBAR, IFHPR/IFTPR,IPHPR/IPTPR,OFHPR/OFTPR, OPHPR/OPTPR,
- MUCR.
- **/
-extern I2OSTATUS I2OFIFOInit( unsigned int eumbbar,
- QUEUE_SIZE,
- unsigned int qba);/* queue base address that must be aligned at 1M */
-/**
- Enable the circular queue
- **/
-extern I2OSTATUS I2OFIFOEnable( unsigned int eumbbar );
-
-/**
- Disable the circular queue
- **/
-extern void I2OFIFODisable( unsigned int eumbbar );
-
-/**
- Enable the circular queue interrupt
- PCI master enables outbound FIFO interrupt of device
- Device enables its inbound FIFO interrupt
- **/
-extern void I2OFIFOIntEnable( LOCATION, unsigned int base );
-
-/**
- Disable the circular queue interrupt
- PCI master disables outbound FIFO interrupt of device
- Device disables its inbound FIFO interrupt
- **/
-extern void I2OFIFOIntDisable( LOCATION, unsigned int base );
-
-/**
- Enable the circular queue overflow interrupt
- **/
-extern void I2OFIFOOverflowIntEnable( unsigned int eumbbar );
-
-/**
- Disable the circular queue overflow interrupt
- **/
-extern void I2OFIFOOverflowIntDisable( unsigned int eumbbar );
-
-/**
- Allocate a free msg frame from free FIFO.
-
- PCI Master allocates a free msg frame through inbound queue port of device(IFQPR)
- while local processor allocates a free msg frame from outbound free queue(OFTPR)
-
- Unless both free queues are initialized, allocating a free MF will return 0xffffffff
- **/
-extern I2OSTATUS I2OFIFOAlloc( LOCATION,
- unsigned int base,
- void **pMsg);
-/**
- Free a used msg frame back to free queue
- PCI Master frees a MFA through outbound queue port of device(OFQPR)
- while local processor frees a MFA into its inbound free queue(IFHPR)
-
- Used msg frame does not need to be recycled in the order they
- read
-
- This function has to be called by PCI master to initialize Inbound free queue
- and by device to initialize Outbound free queue before I2OFIFOAlloc can be used.
- **/
-extern I2OSTATUS I2OFIFOFree( LOCATION,
- unsigned int base,
- void *pMsg );
-
-/**
- Post a msg into FIFO
- PCI Master posts a msg through inbound queue port of device(IFQPR)
- while local processor post a msg into its outbound post queue(OPHPR)
-
- The total number of msg must be less than the max size of the queue
- Otherwise queue overflow interrupt will assert.
- **/
-extern I2OSTATUS I2OFIFOPost( LOCATION,
- unsigned int base,
- void *pMsg );
-
-/**
- Read a msg from FIFO
- PCI Master reads a msg through outbound queue port of device(OFQPR)
- while local processor reads a msg from its inbound post queue(IPTPR)
- **/
-extern I2OSTATUS I2OFIFOGet( LOCATION,
- unsigned int base,
- void **pMsg );
-
-/**
- Get the I2O PCI configuration identification register
- **/
-extern I2OSTATUS I2OPCIConfigGet( LOCATION,
- unsigned int base,
- I2OIOP *);
-
-#endif
diff --git a/cpu/mpc824x/drivers/i2o/i2o1.c b/cpu/mpc824x/drivers/i2o/i2o1.c
deleted file mode 100644
index f058151..0000000
--- a/cpu/mpc824x/drivers/i2o/i2o1.c
+++ /dev/null
@@ -1,890 +0,0 @@
-/*********************************************************
- * $Id
- *
- * copyright @ Motorola, 1999
- *********************************************************/
-#include "i2o.h"
-
-extern unsigned int load_runtime_reg( unsigned int eumbbar, unsigned int reg );
-#pragma Alias( load_runtime_reg, "load_runtime_reg" );
-
-extern void store_runtime_reg( unsigned int eumbbar, unsigned int reg, unsigned int val );
-#pragma Alias( store_runtime_reg, "store_runtime_reg" );
-
-typedef struct _fifo_stat
-{
- QUEUE_SIZE qsz;
- unsigned int qba;
-} FIFOSTAT;
-
-FIFOSTAT fifo_stat = { QSIZE_4K, 0xffffffff };
-
-/**********************************************************************************
- * function: I2OMsgEnable
- *
- * description: Enable the interrupt associated with in/out bound msg
- * return I2OSUCCESS if no error, otherwise return I2OMSGINVALID.
- *
- * All previously enabled interrupts are preserved.
- * note:
- * Inbound message interrupt generated by PCI master and serviced by local processor
- * Outbound message interrupt generated by local processor and serviced by PCI master
- *
- * local processor needs to enable its inbound interrupts it wants to handle(LOCAL)
- * PCI master needs to enable the outbound interrupts of devices it wants to handle(REMOTE)
- ************************************************************************************/
-I2OSTATUS I2OMsgEnable ( LOCATION loc, /* REMOTE/LOCAL */
- unsigned int base, /* pcsrbar/eumbbar */
- unsigned char n ) /* b'1' - msg 0
- * b'10'- msg 1
- * b'11'- both
- */
-{
- unsigned int reg, val;
- if ( ( n & 0x3 ) == 0 )
- {
- /* neither msg 0, nor msg 1 */
- return I2OMSGINVALID;
- }
-
- n = (~n) & 0x3;
- /* LOCATION - REMOTE : enable outbound message of device, pcsrbar as base
- * LOCAL : enable local inbound message, eumbbar as base
- */
- reg = ( loc == REMOTE ? I2O_OMIMR : I2O_IMIMR );
- val = load_runtime_reg( base, reg );
-
- val &= 0xfffffffc; /* masked out the msg interrupt bits */
- val |= n; /* LSB are the one we want */
- store_runtime_reg( base, reg, val );
-
- return I2OSUCCESS;
-}
-
-/*********************************************************************************
- * function: I2OMsgDisable
- *
- * description: Disable the interrupt associated with in/out bound msg
- * Other previously enabled interrupts are preserved.
- * return I2OSUCCESS if no error otherwise return I2OMSGINVALID
- *
- * note:
- * local processor needs to disable its inbound interrupts it is not interested(LOCAL)
- * PCI master needs to disable outbound interrupts of devices it is not interested(REMOTE)
- *********************************************************************************/
-I2OSTATUS I2OMsgDisable( LOCATION loc, /* REMOTE/LOCAL */
- unsigned int base, /* pcsrbar/eumbbar */
- unsigned char n ) /* b'1' - msg 0
- * b'10'- msg 1
- * b'11'- both
- */
-{
- unsigned int reg, val;
-
- if ( ( n & 0x3 ) == 0 )
- {
- /* neither msg 0, nor msg 1 */
- return I2OMSGINVALID;
- }
-
- /* LOCATION - REMOTE : disable outbound message interrupt of device, pcsrbar as base
- * LOCAL : disable local inbound message interrupt, eumbbar as base
- */
- reg = ( loc == REMOTE ? I2O_OMIMR : I2O_IMIMR );
- val = load_runtime_reg( base, reg );
-
- val &= 0xfffffffc; /* masked out the msg interrupt bits */
- val |= ( n & 0x3 );
- store_runtime_reg( base, reg, val );
-
- return I2OSUCCESS;
-
-}
-
-/**************************************************************************
- * function: I2OMsgGet
- *
- * description: Local processor reads the nth Msg register from its inbound msg,
- * or a PCI Master reads nth outbound msg from device
- *
- * return I2OSUCCESS if no error, otherwise return I2OMSGINVALID.
- *
- * note:
- * If it is not local, pcsrbar must be passed to the function. Otherwise eumbbar is passed.
- * If it is remote, outbound msg on the device is read; otherwise local inbound msg is read
- *************************************************************************/
-I2OSTATUS I2OMsgGet ( LOCATION loc, /* REMOTE/LOCAL */
- unsigned int base, /*pcsrbar/eumbbar */
- unsigned int n, /* 0 or 1 */
- unsigned int *msg )
-{
- if ( n >= I2O_NUM_MSG || msg == 0 )
- {
- return I2OMSGINVALID;
- }
-
- if ( loc == REMOTE )
- {
- /* read the outbound msg of the device, pcsrbar as base */
- *msg = load_runtime_reg( base, I2O_OMR0+n*I2O_REG_OFFSET );
- }
- else
- {
- /* read the inbound msg sent by PCI master, eumbbar as base */
- *msg = load_runtime_reg( base, I2O_IMR0+n*I2O_REG_OFFSET );
- }
-
- return I2OSUCCESS;
-}
-
-/***************************************************************
- * function: I2OMsgPost
- *
- * description: Kahlua writes to its nth outbound msg register
- * PCI master writes to nth inbound msg register of device
- *
- * return I2OSUCCESS if no error, otherwise return I2OMSGINVALID.
- *
- * note:
- * If it is not local, pcsrbar must be passed to the function. Otherwise eumbbar is passed.
- *
- * If it is remote, inbound msg on the device is written; otherwise local outbound msg is written
- ***************************************************************/
-I2OSTATUS I2OMsgPost( LOCATION loc, /* REMOTE/LOCAL */
- unsigned int base, /*pcsrbar/eumbbar */
- unsigned int n, /* 0 or 1 */
- unsigned int msg )
-{
- if ( n >= I2O_NUM_MSG )
- {
- return I2OMSGINVALID;
- }
-
- if ( loc == REMOTE )
- {
- /* write to the inbound msg register of the device, pcsrbar as base */
- store_runtime_reg( base, I2O_IMR0+n*I2O_REG_OFFSET, msg );
- }
- else
- {
- /* write to the outbound msg register for PCI master to read, eumbbar as base */
- store_runtime_reg( base, I2O_OMR0+n*I2O_REG_OFFSET, msg );
- }
-
- return I2OSUCCESS;
-}
-
-/***********************************************************************
- * function: I2ODBEnable
- *
- * description: Local processor enables it's inbound doorbell interrupt
- * PCI master enables outbound doorbell interrupt of devices
- * Other previously enabled interrupts are preserved.
- * Return I2OSUCCESS if no error otherwise return I2ODBINVALID
- *
- * note:
- * In DoorBell interrupt is generated by PCI master and serviced by local processor
- * Out Doorbell interrupt is generated by local processor and serviced by PCI master
- *
- * Out Doorbell interrupt is generated by local processor and serviced by PCI master
- * PCI master needs to enable the outbound doorbell interrupts of device it wants to handle
- **********************************************************************/
-I2OSTATUS I2ODBEnable( LOCATION loc, /* REMOTE/LOCAL */
- unsigned int base, /* pcsrbar/eumbbar */
- unsigned int in_db ) /* when LOCAL, I2O_IN_DB, MC, I2O_IN_DB|MC */
-{
-
- /* LOCATION - REMOTE : PCI master initializes outbound doorbell message of device
- * LOCAL : Kahlua initializes its inbound doorbell message
- */
- unsigned int val;
-
- if ( loc == LOCAL && ( in_db & 0x3 ) == 0 )
- {
- return I2ODBINVALID;
- }
-
- if ( loc == REMOTE )
- {
- /* pcsrbar is base */
- val = load_runtime_reg( base, I2O_OMIMR );
- val &= 0xfffffff7;
- store_runtime_reg( base, I2O_OMIMR , val );
- }
- else
- {
- /* eumbbar is base */
- val = load_runtime_reg( base, I2O_IMIMR);
- in_db = ( (~in_db) & 0x3 ) << 3;
- val = ( val & 0xffffffe7) | in_db;
- store_runtime_reg( base, I2O_IMIMR, val );
- }
-
- return I2OSUCCESS;
-}
-
-/**********************************************************************************
- * function: I2ODBDisable
- *
- * description: local processor disables its inbound DoorBell Interrupt
- * PCI master disables outbound DoorBell interrupt of device
- * Other previously enabled interrupts are preserved.
- * return I2OSUCCESS if no error.Otherwise return I2ODBINVALID
- *
- * note:
- * local processor needs to disable its inbound doorbell interrupts it is not interested
- *
- * PCI master needs to disable outbound doorbell interrupts of device it is not interested
- ************************************************************************************/
-I2OSTATUS I2ODBDisable( LOCATION loc, /* REMOTE/LOCAL */
- unsigned int base, /* pcsrbar/eumbbar */
- unsigned int in_db ) /* when LOCAL, I2O_IN_DB, MC, I2O_IN_DB|MC */
-{
- /* LOCATION - REMOTE : handle device's out bound message initialization
- * LOCAL : handle local in bound message initialization
- */
- unsigned int val;
-
- if ( loc == LOCAL && ( in_db & 0x3 ) == 0 )
- {
- return I2ODBINVALID;
- }
-
- if ( loc == REMOTE )
- {
- /* pcsrbar is the base */
- val = load_runtime_reg( base, I2O_OMIMR );
- val |= 0x8;
- store_runtime_reg( base, I2O_OMIMR, val );
- }
- else
- {
- val = load_runtime_reg( base, I2O_IMIMR);
- in_db = ( in_db & 0x3 ) << 3;
- val |= in_db;
- store_runtime_reg( base, I2O_IMIMR, val );
- }
-
- return I2OSUCCESS;
-}
-
-/**********************************************************************************
- * function: I2ODBGet
- *
- * description: Local processor reads its in doorbell register,
- * PCI master reads the outdoorbell register of device.
- * After a doorbell register is read, the whole register will be cleared.
- * Otherwise, HW keeps generating interrupt.
- *
- * note:
- * If it is not local, pcsrbar must be passed to the function.
- * Otherwise eumbbar is passed.
- *
- * If it is remote, out doorbell register on the device is read.
- * Otherwise local in doorbell is read
- *
- * If the register is not cleared by write to it, any remaining bit of b'1's
- * will cause interrupt pending.
- *********************************************************************************/
-unsigned int I2ODBGet( LOCATION loc, /* REMOTE/LOCAL */
- unsigned int base) /* pcsrbar/eumbbar */
-{
- unsigned int msg, val;
-
- if ( loc == REMOTE )
- {
- /* read outbound doorbell register of device, pcsrbar is the base */
- val = load_runtime_reg( base, I2O_ODBR );
- msg = val & 0xe0000000;
- store_runtime_reg( base, I2O_ODBR, val ); /* clear the register */
- }
- else
- {
- /* read the inbound doorbell register, eumbbar is the base */
- val = load_runtime_reg( base, I2O_IDBR );
- store_runtime_reg( base, I2O_IDBR, val ); /* clear the register */
- msg = val;
- }
-
- return msg;
-}
-
-/**********************************************************************
- * function: I2ODBPost
- *
- * description: local processor writes to a outbound doorbell register,
- * PCI master writes to the inbound doorbell register of device
- *
- * note:
- * If it is not local, pcsrbar must be passed to the function.
- * Otherwise eumbbar is passed.
- *
- * If it is remote, in doorbell register on the device is written.
- * Otherwise local out doorbell is written
- *********************************************************************/
-void I2ODBPost( LOCATION loc, /* REMOTE/LOCAL */
- unsigned int base, /* pcsrbar/eumbbar */
- unsigned int msg ) /* in / out */
-{
- if ( loc == REMOTE )
- {
- /* write to inbound doorbell register of device, pcsrbar is the base */
- store_runtime_reg( base, I2O_IDBR, msg );
- }
- else
- {
- /* write to local outbound doorbell register, eumbbar is the base */
- store_runtime_reg( base, I2O_ODBR, msg & 0x1fffffff );
- }
-
-}
-
-/********************************************************************
- * function: I2OOutMsgStatGet
- *
- * description: PCI master reads device's outbound msg unit interrupt status.
- * Reading an interrupt status register,
- * the register will be cleared.
- *
- * The value of the status register is AND with the outbound
- * interrupt mask and result is returned.
- *
- * note:
- * pcsrbar must be passed to the function.
- ********************************************************************/
-I2OSTATUS I2OOutMsgStatGet( unsigned int pcsrbar, I2OOMSTAT *val )
-{
- unsigned int stat;
- unsigned int mask;
-
- if ( val == 0 )
- {
- return I2OINVALID;
- }
-
- /* read device's outbound status */
- stat = load_runtime_reg( pcsrbar, I2O_OMISR );
- mask = load_runtime_reg( pcsrbar, I2O_OMIMR );
- store_runtime_reg( pcsrbar, I2O_OMISR, stat & 0xffffffd7);
-
- stat &= mask;
- val->rsvd0 = ( stat & 0xffffffc0 ) >> 6;
- val->opqi = ( stat & 0x00000020 ) >> 5;
- val->rsvd1 = ( stat & 0x00000010 ) >> 4;
- val->odi = ( stat & 0x00000008 ) >> 3;
- val->rsvd2 = ( stat & 0x00000004 ) >> 2;
- val->om1i = ( stat & 0x00000002 ) >> 1;
- val->om0i = ( stat & 0x00000001 );
-
- return I2OSUCCESS;
-}
-
-/********************************************************************
- * function: I2OInMsgStatGet
- *
- * description: Local processor reads its inbound msg unit interrupt status.
- * Reading an interrupt status register,
- * the register will be cleared.
- *
- * The inbound msg interrupt status is AND with the inbound
- * msg interrupt mask and result is returned.
- *
- * note:
- * eumbbar must be passed to the function.
- ********************************************************************/
-I2OSTATUS I2OInMsgStatGet(unsigned int eumbbar, I2OIMSTAT *val)
-{
- unsigned int stat;
- unsigned int mask;
-
- if ( val == 0 )
- {
- return I2OINVALID;
- }
-
- /* read device's outbound status */
- stat = load_runtime_reg( eumbbar, I2O_OMISR );
- mask = load_runtime_reg( eumbbar, I2O_OMIMR );
- store_runtime_reg( eumbbar, I2O_OMISR, stat & 0xffffffe7 );
-
- stat &= mask;
- val->rsvd0 = ( stat & 0xfffffe00 ) >> 9;
- val->ofoi = ( stat & 0x00000100 ) >> 8;
- val->ipoi = ( stat & 0x00000080 ) >> 7;
- val->rsvd1 = ( stat & 0x00000040 ) >> 6;
- val->ipqi = ( stat & 0x00000020 ) >> 5;
- val->mci = ( stat & 0x00000010 ) >> 4;
- val->idi = ( stat & 0x00000008 ) >> 3;
- val->rsvd2 = ( stat & 0x00000004 ) >> 2;
- val->im1i = ( stat & 0x00000002 ) >> 1;
- val->im0i = ( stat & 0x00000001 );
-
- return I2OSUCCESS;
-
-}
-
-/***********************************************************
- * function: I2OFIFOInit
- *
- * description: Configure the I2O FIFO, including QBAR,
- * IFHPR/IFTPR, IPHPR/IPTPR, OFHPR/OFTPR,
- * OPHPR/OPTPR, MUCR.
- *
- * return I2OSUCCESS if no error,
- * otherwise return I2OQUEINVALID
- *
- * note: It is NOT this driver's responsibility of initializing
- * MFA blocks, i.e., FIFO queue itself. The MFA blocks
- * must be initialized before I2O unit can be used.
- ***********************************************************/
-I2OSTATUS I2OFIFOInit( unsigned int eumbbar,
- QUEUE_SIZE sz, /* value of CQS of MUCR */
- unsigned int qba) /* queue base address that must be aligned at 1M */
-{
-
- if ( ( qba & 0xfffff ) != 0 )
- {
- /* QBA must be aligned at 1Mbyte boundary */
- return I2OQUEINVALID;
- }
-
- store_runtime_reg( eumbbar, I2O_QBAR, qba );
- store_runtime_reg( eumbbar, I2O_MUCR, (unsigned int)sz );
- store_runtime_reg( eumbbar, I2O_IFHPR, qba );
- store_runtime_reg( eumbbar, I2O_IFTPR, qba );
- store_runtime_reg( eumbbar, I2O_IPHPR, qba + 1 * ( sz << 11 ));
- store_runtime_reg( eumbbar, I2O_IPTPR, qba + 1 * ( sz << 11 ));
- store_runtime_reg( eumbbar, I2O_OFHPR, qba + 2 * ( sz << 11 ));
- store_runtime_reg( eumbbar, I2O_OFTPR, qba + 2 * ( sz << 11 ));
- store_runtime_reg( eumbbar, I2O_OPHPR, qba + 3 * ( sz << 11 ));
- store_runtime_reg( eumbbar, I2O_OPTPR, qba + 3 * ( sz << 11 ));
-
- fifo_stat.qsz = sz;
- fifo_stat.qba = qba;
-
- return I2OSUCCESS;
-}
-
-/**************************************************
- * function: I2OFIFOEnable
- *
- * description: Enable the circular queue
- * return I2OSUCCESS if no error.
- * Otherwise I2OQUEINVALID is returned.
- *
- * note:
- *************************************************/
-I2OSTATUS I2OFIFOEnable( unsigned int eumbbar )
-{
- unsigned int val;
-
- if ( fifo_stat.qba == 0xfffffff )
- {
- return I2OQUEINVALID;
- }
-
- val = load_runtime_reg( eumbbar, I2O_MUCR );
- store_runtime_reg( eumbbar, I2O_MUCR, val | 0x1 );
-
- return I2OSUCCESS;
-}
-
-/**************************************************
- * function: I2OFIFODisable
- *
- * description: Disable the circular queue
- *
- * note:
- *************************************************/
-void I2OFIFODisable( unsigned int eumbbar )
-{
- if ( fifo_stat.qba == 0xffffffff )
- {
- /* not enabled */
- return;
- }
-
- unsigned int val = load_runtime_reg( eumbbar, I2O_MUCR );
- store_runtime_reg( eumbbar, I2O_MUCR, val & 0xfffffffe );
-}
-
-/****************************************************
- * function: I2OFIFOAlloc
- *
- * description: Allocate a free MFA from free FIFO.
- * return I2OSUCCESS if no error.
- * return I2OQUEEMPTY if no more free MFA.
- * return I2OINVALID on other errors.
- *
- * A free MFA must be allocated before a
- * message can be posted.
- *
- * note:
- * PCI Master allocates a free MFA from inbound queue of device
- * (pcsrbar is the base,) through the inbound queue port of device
- * while local processor allocates a free MFA from its outbound
- * queue (eumbbar is the base.)
- *
- ****************************************************/
-I2OSTATUS I2OFIFOAlloc( LOCATION loc,
- unsigned int base,
- void **pMsg )
-{
- I2OSTATUS stat = I2OSUCCESS;
- void *pHdr, *pTil;
-
- if ( pMsg == 0 || *pMsg == 0 || fifo_stat.qba == 0xffffffff )
- {
- /* not configured */
- return I2OQUEINVALID;
- }
-
- if ( loc == REMOTE )
- {
- /* pcsrbar is the base and read the inbound free tail ptr */
- pTil = (void *)load_runtime_reg( base, I2O_IFQPR );
- if ( ( (unsigned int)pTil & 0xFFFFFFF ) == 0xFFFFFFFF )
- {
- stat = I2OQUEEMPTY;
- }
- else
- {
- *pMsg = pTil;
- }
- }
- else
- {
- /* eumbbar is the base and read the outbound free tail ptr */
- pHdr = (void *)load_runtime_reg( base, I2O_OFHPR ); /* queue head */
- pTil = (void *)load_runtime_reg( base, I2O_OFTPR ); /* queue tail */
-
- /* check underflow */
- if ( pHdr == pTil )
- {
- /* hdr and til point to the same fifo item, no free MFA */
- stat = I2OQUEEMPTY;
- }
- else
- {
- /* update OFTPR */
- *pMsg = (void *)(*(unsigned char *)pTil);
- pTil = (void *)((unsigned int)pTil + 4);
- if ( (unsigned int)pTil == fifo_stat.qba + ( 4 * ( fifo_stat.qsz << 11 ) ) )
- {
- /* reach the upper limit */
- pTil = (void *)(fifo_stat.qba + ( 3 * (fifo_stat.qsz << 11) ));
- }
- store_runtime_reg( base, I2O_OFTPR, (unsigned int)pTil );
- }
- }
-
- return stat;
-}
-
-/******************************************************
- * function: I2OFIFOFree
- *
- * description: Free a used MFA back to free queue after
- * use.
- * return I2OSUCCESS if no error.
- * return I2OQUEFULL if inbound free queue
- * overflow
- *
- * note: PCI Master frees a MFA into device's outbound queue
- * (OFQPR) while local processor frees a MFA into its
- * inbound queue (IFHPR).
- *****************************************************/
-I2OSTATUS I2OFIFOFree( LOCATION loc,
- unsigned int base,
- void *pMsg )
-{
- void **pHdr, **pTil;
- I2OSTATUS stat = I2OSUCCESS;
-
- if ( fifo_stat.qba == 0xffffffff || pMsg == 0 )
- {
- return I2OQUEINVALID;
- }
-
- if ( loc == REMOTE )
- {
- /* pcsrbar is the base */
- store_runtime_reg( base, I2O_OFQPR, (unsigned int)pMsg );
- }
- else
- {
- /* eumbbar is the base */
- pHdr = (void **)load_runtime_reg( base, I2O_IFHPR );
- pTil = (void **)load_runtime_reg( base, I2O_IFTPR );
-
- /* store MFA */
- *pHdr = pMsg;
-
- /* update IFHPR */
- pHdr += 4;
-
- if ( (unsigned int)pHdr == fifo_stat.qba + ( fifo_stat.qsz << 11 ) )
- {
- /* reach the upper limit */
- pHdr = (void **)fifo_stat.qba;
- }
-
- /* check inbound free queue overflow */
- if ( pHdr != pTil )
- {
- store_runtime_reg( base, I2O_OPHPR, (unsigned int)pHdr);
- }
- else
- {
- stat = I2OQUEFULL;
- }
-
- }
-
- return stat;
-
-}
-
-/*********************************************
- * function: I2OFIFOPost
- *
- * description: Post a msg into FIFO post queue
- * the value of msg must be the one
- * returned by I2OFIFOAlloc
- *
- * note: PCI Master posts a msg into device's inbound queue
- * (IFQPR) while local processor post a msg into device's
- * outbound queue (OPHPR)
- *********************************************/
-I2OSTATUS I2OFIFOPost( LOCATION loc,
- unsigned int base,
- void *pMsg )
-{
- void **pHdr, **pTil;
- I2OSTATUS stat = I2OSUCCESS;
-
- if ( fifo_stat.qba == 0xffffffff || pMsg == 0 )
- {
- return I2OQUEINVALID;
- }
-
- if ( loc == REMOTE )
- {
- /* pcsrbar is the base */
- store_runtime_reg( base, I2O_IFQPR, (unsigned int)pMsg );
- }
- else
- {
- /* eumbbar is the base */
- pHdr = (void **)load_runtime_reg( base, I2O_OPHPR );
- pTil = (void **)load_runtime_reg( base, I2O_OPTPR );
-
- /* store MFA */
- *pHdr = pMsg;
-
- /* update IFHPR */
- pHdr += 4;
-
- if ( (unsigned int)pHdr == fifo_stat.qba + 3 * ( fifo_stat.qsz << 11 ) )
- {
- /* reach the upper limit */
- pHdr = (void **)(fifo_stat.qba + 2 * ( fifo_stat.qsz << 11 ) );
- }
-
- /* check post queue overflow */
- if ( pHdr != pTil )
- {
- store_runtime_reg( base, I2O_OPHPR, (unsigned int)pHdr);
- }
- else
- {
- stat = I2OQUEFULL;
- }
- }
-
- return stat;
-}
-
-/************************************************
- * function: I2OFIFOGet
- *
- * description: Read a msg from FIFO
- * This function should be called
- * only when there is a corresponding
- * msg interrupt.
- *
- * note: PCI Master reads a msg from device's outbound queue
- * (OFQPR) while local processor reads a msg from device's
- * inbound queue (IPTPR)
- ************************************************/
-I2OSTATUS I2OFIFOGet( LOCATION loc,
- unsigned int base,
- void **pMsg )
-{
- I2OSTATUS stat = I2OSUCCESS;
- void *pHdr, *pTil;
-
- if ( pMsg == 0 || *pMsg == 0 || fifo_stat.qba == 0xffffffff )
- {
- /* not configured */
- return I2OQUEINVALID;
- }
-
- if ( loc == REMOTE )
- {
- /* pcsrbar is the base */
- pTil = (void *)load_runtime_reg( base, I2O_OFQPR );
- if ( ( (unsigned int)pTil & 0xFFFFFFF ) == 0xFFFFFFFF )
- {
- stat = I2OQUEEMPTY;
- }
- else
- {
- *pMsg = pTil;
- }
- }
- else
- {
- /* eumbbar is the base and read the outbound free tail ptr */
- pHdr = (void *)load_runtime_reg( base, I2O_IPHPR ); /* queue head */
- pTil = (void *)load_runtime_reg( base, I2O_IPTPR ); /* queue tail */
-
- /* check underflow */
- if ( pHdr == pTil )
- {
- /* no free MFA */
- stat = I2OQUEEMPTY;
- }
- else
- {
- /* update OFTPR */
- *pMsg = (void *)(*(unsigned char *)pTil);
- pTil = (void *)((unsigned int)pTil + 4);
- if ( (unsigned int)pTil == fifo_stat.qba + 2 * ( fifo_stat.qsz << 11 ) )
- {
- /* reach the upper limit */
- pTil = (void *)(fifo_stat.qba + 1 * (fifo_stat.qsz << 11) );
- }
-
- store_runtime_reg( base, I2O_IPTPR, (unsigned int)pTil );
- }
- }
-
- return stat;
-}
-
-/********************************************************
- * function: I2OIOP
- *
- * description: Get the I2O PCI configuration identification
- * register.
- *
- * note: PCI master should pass pcsrbar while local processor
- * should pass eumbbar.
- *********************************************************/
-I2OSTATUS I2OPCIConfigGet( LOCATION loc,
- unsigned int base,
- I2OIOP * val)
-{
- unsigned int tmp;
- if ( val == 0 )
- {
- return I2OINVALID;
- }
- tmp = load_runtime_reg( base, PCI_CFG_CLA );
- val->base_class = ( tmp & 0xFF) << 16;
- tmp = load_runtime_reg( base, PCI_CFG_SCL );
- val->sub_class= ( (tmp & 0xFF) << 8 );
- tmp = load_runtime_reg( base, PCI_CFG_PIC );
- val->prg_code = (tmp & 0xFF);
- return I2OSUCCESS;
-}
-
-/*********************************************************
- * function: I2OFIFOIntEnable
- *
- * description: Enable the circular post queue interrupt
- *
- * note:
- * PCI master enables outbound FIFO interrupt of device
- * pscrbar is the base
- * Device enables its inbound FIFO interrupt
- * eumbbar is the base
- *******************************************************/
-void I2OFIFOIntEnable( LOCATION loc, unsigned int base )
-{
- unsigned int reg, val;
-
- /* LOCATION - REMOTE : enable outbound message of device, pcsrbar as base
- * LOCAL : enable local inbound message, eumbbar as base
- */
- reg = ( loc == REMOTE ? I2O_OMIMR : I2O_IMIMR );
- val = load_runtime_reg( base, reg );
-
- val &= 0xffffffdf; /* clear the msg interrupt bits */
- store_runtime_reg( base, reg, val );
-
-}
-
-/****************************************************
- * function: I2OFIFOIntDisable
- *
- * description: Disable the circular post queue interrupt
- *
- * note:
- * PCI master disables outbound FIFO interrupt of device
- * (pscrbar is the base)
- * Device disables its inbound FIFO interrupt
- * (eumbbar is the base)
- *****************************************************/
-void I2OFIFOIntDisable( LOCATION loc, unsigned int base )
-{
-
- /* LOCATION - REMOTE : disable outbound message interrupt of device, pcsrbar as base
- * LOCAL : disable local inbound message interrupt, eumbbar as base
- */
- unsigned int reg = ( loc == REMOTE ? I2O_OMIMR : I2O_IMIMR );
- unsigned int val = load_runtime_reg( base, reg );
-
- val |= 0x00000020; /* masked out the msg interrupt bits */
- store_runtime_reg( base, reg, val );
-
-}
-
-/*********************************************************
- * function: I2OFIFOOverflowIntEnable
- *
- * description: Enable the circular queue overflow interrupt
- *
- * note:
- * Device enables its inbound FIFO post overflow interrupt
- * and outbound free overflow interrupt.
- * eumbbar is the base
- *******************************************************/
-void I2OFIFOOverflowIntEnable( unsigned int eumbbar )
-{
- unsigned int val = load_runtime_reg( eumbbar, I2O_IMIMR );
-
- val &= 0xfffffe7f; /* clear the two overflow interrupt bits */
- store_runtime_reg( eumbbar, I2O_IMIMR, val );
-
-}
-
-/****************************************************
- * function: I2OFIFOOverflowIntDisable
- *
- * description: Disable the circular queue overflow interrupt
- *
- * note:
- * Device disables its inbound post FIFO overflow interrupt
- * and outbound free FIFO overflow interrupt
- * (eumbbar is the base)
- *****************************************************/
-void I2OFIFOOverflowIntDisable( unsigned int eumbbar )
-{
-
- unsigned int val = load_runtime_reg( eumbbar, I2O_IMIMR );
-
- val |= 0x00000180; /* masked out the msg overflow interrupt bits */
- store_runtime_reg( eumbbar, I2O_IMIMR, val );
-}
diff --git a/cpu/mpc824x/drivers/i2o/i2o2.S b/cpu/mpc824x/drivers/i2o/i2o2.S
deleted file mode 100644
index 990f9ef..0000000
--- a/cpu/mpc824x/drivers/i2o/i2o2.S
+++ /dev/null
@@ -1,47 +0,0 @@
-/**************************************
- *
- * copyright @ Motorola, 1999
- *
- **************************************/
-
-/**********************************************************
- * function: load_runtime_reg
- *
- * input: r3 - value of eumbbar
- * r4 - register offset in embedded utility space
- *
- * output: r3 - register content
- **********************************************************/
- .text
- .align 2
- .global load_runtime_reg
-
-load_runtime_reg:
-
- xor r5,r5,r5
- or r5,r5,r3 /* save eumbbar */
-
- lwbrx r3,r4,r5
- sync
-
- bclr 20, 0
-
-/****************************************************************
- * function: store_runtime_reg
- *
- * input: r3 - value of eumbbar
- * r4 - register offset in embedded utility space
- * r5 - new value to be stored
- *
- ****************************************************************/
- .text
- .align 2
- .global store_runtime_reg
-store_runtime_reg:
-
- xor r0,r0,r0
-
- stwbrx r5, r4, r3
- sync
-
- bclr 20,0
diff --git a/cpu/mpc8260/Makefile b/cpu/mpc8260/Makefile
index b4c269f..b1f1c18 100644
--- a/cpu/mpc8260/Makefile
+++ b/cpu/mpc8260/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,23 +23,27 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o kgdb.o
-OBJS = traps.o serial_smc.o serial_scc.o cpu.o cpu_init.o speed.o \
+COBJS = traps.o serial_smc.o serial_scc.o cpu.o cpu_init.o speed.o \
interrupts.o ether_scc.o ether_fcc.o i2c.o commproc.o \
bedbug_603e.o pci.o spi.o
-all: .depend $(START) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
- $(AR) crv $@ $(OBJS) kgdb.o
+ $(AR) crv $@ $(OBJS) $(obj)kgdb.o
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/mpc83xx/Makefile b/cpu/mpc83xx/Makefile
index 60df4cd..f3fa6fd 100644
--- a/cpu/mpc83xx/Makefile
+++ b/cpu/mpc83xx/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# Copyright 2004 Freescale Semiconductor, Inc.
#
# See file CREDITS for list of people who contributed to this
@@ -22,31 +25,26 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
-START = start.o \
- resetvec.o
+START = start.o resetvec.o
+COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o \
+ i2c.o spd_sdram.o
-COBJS = traps.o \
- cpu.o \
- cpu_init.o \
- speed.o \
- interrupts.o \
- i2c.o \
- spd_sdram.o
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
-OBJS = $(COBJS)
-
-all: .depend $(START) $(LIB)
+all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(COBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/mpc85xx/Makefile b/cpu/mpc85xx/Makefile
index 5298dc1..bbc5084 100644
--- a/cpu/mpc85xx/Makefile
+++ b/cpu/mpc85xx/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2002,2003 Motorola Inc.
# Xianghua Xiao,X.Xiao@motorola.com
#
@@ -23,23 +26,26 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o resetvec.o
COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o \
pci.o serial_scc.o commproc.o ether_fcc.o i2c.o spd_sdram.o
-OBJS = $(COBJS)
-all: .depend $(START) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/mpc8xx/Makefile b/cpu/mpc8xx/Makefile
index de75fad..6451e05 100644
--- a/cpu/mpc8xx/Makefile
+++ b/cpu/mpc8xx/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -25,25 +25,29 @@ include $(TOPDIR)/config.mk
# CFLAGS += -DET_DEBUG
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o kgdb.o
-OBJS = bedbug_860.o commproc.o cpu.o cpu_init.o \
+COBJS = bedbug_860.o commproc.o cpu.o cpu_init.o \
fec.o i2c.o interrupts.o lcd.o scc.o \
serial.o speed.o spi.o \
traps.o upatch.o video.o
SOBJS = plprcr_write.o
-all: .depend $(START) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $(OBJS) $(SOBJS) kgdb.o
+all: $(obj).depend $(START) $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) crv $@ $(OBJS) $(obj)kgdb.o
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) $(SOBJS:.o=.S)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) $(SOBJS:.o=.S) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/nios/Makefile b/cpu/nios/Makefile
index 7855325..cdab7b0 100644
--- a/cpu/nios/Makefile
+++ b/cpu/nios/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,22 +23,26 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o
-AOBJS = traps.o
-OBJS = cpu.o interrupts.o serial.o asmi.o spi.o
+SOBJS = traps.o
+COBJS = cpu.o interrupts.o serial.o asmi.o spi.o
-all: .depend $(START) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
-$(LIB): $(OBJS) $(AOBJS)
- $(AR) crv $@ $(OBJS) $(AOBJS)
+all: $(obj).depend $(START) $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) $(AOBJS:.o=.S)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) $(AOBJS:.o=.S) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/nios2/Makefile b/cpu/nios2/Makefile
index 11fda50..f903129 100644
--- a/cpu/nios2/Makefile
+++ b/cpu/nios2/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,22 +23,26 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o
-AOBJS = exceptions.o
-OBJS = cpu.o interrupts.o serial.o sysid.o traps.o epcs.o
+SOBJS = exceptions.o
+COBJS = cpu.o interrupts.o serial.o sysid.o traps.o epcs.o
-all: .depend $(START) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
-$(LIB): $(OBJS) $(AOBJS)
- $(AR) crv $@ $(OBJS) $(AOBJS)
+all: $(obj).depend $(START) $(LIB)
+
+$(LIB): $(OBJS)
+ $(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) $(AOBJS:.o=.S)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) $(AOBJS:.o=.S) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/ppc4xx/405gp_pci.c b/cpu/ppc4xx/405gp_pci.c
index 7e2c7c1..9b711e2 100644
--- a/cpu/ppc4xx/405gp_pci.c
+++ b/cpu/ppc4xx/405gp_pci.c
@@ -559,7 +559,8 @@ void pci_440_init (struct pci_controller *hose)
#ifdef CONFIG_PCI_SCAN_SHOW
printf("PCI: Bus Dev VenId DevId Class Int\n");
#endif
-#if !defined(CONFIG_440EP) && !defined(CONFIG_440GR)
+#if !defined(CONFIG_440EP) && !defined(CONFIG_440GR) && \
+ !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX)
out16r( PCIX0_CMD, in16r( PCIX0_CMD ) | PCI_COMMAND_MASTER);
#endif
hose->last_busno = pci_hose_scan(hose);
diff --git a/cpu/ppc4xx/440spe_pcie.c b/cpu/ppc4xx/440spe_pcie.c
index 2e920aa..6130cd2 100644
--- a/cpu/ppc4xx/440spe_pcie.c
+++ b/cpu/ppc4xx/440spe_pcie.c
@@ -169,7 +169,7 @@ static void ppc440spe_setup_utl(u32 port) {
break;
}
utl_base = (unsigned int *)(CFG_PCIE_BASE + 0x1000 * port);
-
+
/*
* Set buffer allocations and then assert VRB and TXE.
*/
@@ -270,7 +270,7 @@ int ppc440spe_init_pcie(void)
SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) & ~(1 << 24));
udelay(3);
- while(time_out) {
+ while (time_out) {
if (!(SDR_READ(PESDR0_PLLLCT3) & 0x10000000)) {
time_out--;
udelay(1);
@@ -284,6 +284,40 @@ int ppc440spe_init_pcie(void)
return 0;
}
+/*
+ * Yucca board as End point and root point setup
+ * and
+ * testing inbound and out bound windows
+ *
+ * YUCCA board can be plugged into another yucca board or you can get PCI-E
+ * cable which can be used to setup loop back from one port to another port.
+ * Please rememeber that unless there is a endpoint plugged in to root port it
+ * will not initialize. It is the same in case of endpoint , unless there is
+ * root port attached it will not initialize.
+ *
+ * In this release of software all the PCI-E ports are configured as either
+ * endpoint or rootpoint.In future we will have support for selective ports
+ * setup as endpoint and root point in single board.
+ *
+ * Once your board came up as root point , you can verify by reading
+ * /proc/bus/pci/devices. Where you can see the configuration registers
+ * of end point device attached to the port.
+ *
+ * Enpoint cofiguration can be verified by connecting Yucca board to any
+ * host or another yucca board. Then try to scan the device. In case of
+ * linux use "lspci" or appripriate os command.
+ *
+ * How do I verify the inbound and out bound windows ?(yucca to yucca)
+ * in this configuration inbound and outbound windows are setup to access
+ * sram memroy area. SRAM is at 0x4 0000 0000 , on PLB bus. This address
+ * is mapped at 0x90000000. From u-boot prompt write data 0xb000 0000,
+ * This is waere your POM(PLB out bound memory window) mapped. then
+ * read the data from other yucca board's u-boot prompt at address
+ * 0x9000 0000(SRAM). Data should match.
+ * In case of inbound , write data to u-boot command prompt at 0xb000 0000
+ * which is mapped to 0x4 0000 0000. Now on rootpoint yucca u-boot prompt check
+ * data at 0x9000 0000(SRAM).Data should match.
+ */
int ppc440spe_init_pcie_rootport(int port)
{
static int core_init;
@@ -326,7 +360,7 @@ int ppc440spe_init_pcie_rootport(int port)
SDR_WRITE(PESDR0_HSSL6SET1, 0x35000000);
SDR_WRITE(PESDR0_HSSL7SET1, 0x35000000);
SDR_WRITE(PESDR0_RCSSET,
- (SDR_READ(PESDR0_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
+ (SDR_READ(PESDR0_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
break;
case 1:
@@ -339,7 +373,7 @@ int ppc440spe_init_pcie_rootport(int port)
SDR_WRITE(PESDR1_HSSL2SET1, 0x35000000);
SDR_WRITE(PESDR1_HSSL3SET1, 0x35000000);
SDR_WRITE(PESDR1_RCSSET,
- (SDR_READ(PESDR1_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
+ (SDR_READ(PESDR1_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
break;
case 2:
@@ -352,6 +386,225 @@ int ppc440spe_init_pcie_rootport(int port)
SDR_WRITE(PESDR2_HSSL2SET1, 0x35000000);
SDR_WRITE(PESDR2_HSSL3SET1, 0x35000000);
SDR_WRITE(PESDR2_RCSSET,
+ (SDR_READ(PESDR2_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
+ break;
+ }
+ /*
+ * Notice: the following delay has critical impact on device
+ * initialization - if too short (<50ms) the link doesn't get up.
+ */
+ mdelay(100);
+
+ switch (port) {
+ case 0:
+ val = SDR_READ(PESDR0_RCSSTS);
+ break;
+ case 1:
+ val = SDR_READ(PESDR1_RCSSTS);
+ break;
+ case 2:
+ val = SDR_READ(PESDR2_RCSSTS);
+ break;
+ }
+
+ if (val & (1 << 20)) {
+ printf("PCIE%d: PGRST failed %08x\n", port, val);
+ return -1;
+ }
+
+ /*
+ * Verify link is up
+ */
+ val = 0;
+ switch (port) {
+ case 0:
+ val = SDR_READ(PESDR0_LOOP);
+ break;
+ case 1:
+ val = SDR_READ(PESDR1_LOOP);
+ break;
+ case 2:
+ val = SDR_READ(PESDR2_LOOP);
+ break;
+ }
+ if (!(val & 0x00001000)) {
+ printf("PCIE%d: link is not up.\n", port);
+ return -1;
+ }
+
+ /*
+ * Setup UTL registers - but only on revA!
+ * We use default settings for revB chip.
+ */
+ if (!ppc440spe_revB())
+ ppc440spe_setup_utl(port);
+
+ /*
+ * We map PCI Express configuration access into the 512MB regions
+ *
+ * NOTICE: revB is very strict about PLB real addressess and ranges to
+ * be mapped for config space; it seems to only work with d_nnnn_nnnn
+ * range (hangs the core upon config transaction attempts when set
+ * otherwise) while revA uses c_nnnn_nnnn.
+ *
+ * For revA:
+ * PCIE0: 0xc_4000_0000
+ * PCIE1: 0xc_8000_0000
+ * PCIE2: 0xc_c000_0000
+ *
+ * For revB:
+ * PCIE0: 0xd_0000_0000
+ * PCIE1: 0xd_2000_0000
+ * PCIE2: 0xd_4000_0000
+ */
+
+ switch (port) {
+ case 0:
+ if (ppc440spe_revB()) {
+ mtdcr(DCRN_PEGPL_CFGBAH(PCIE0), 0x0000000d);
+ mtdcr(DCRN_PEGPL_CFGBAL(PCIE0), 0x00000000);
+ } else {
+ /* revA */
+ mtdcr(DCRN_PEGPL_CFGBAH(PCIE0), 0x0000000c);
+ mtdcr(DCRN_PEGPL_CFGBAL(PCIE0), 0x40000000);
+ }
+ mtdcr(DCRN_PEGPL_CFGMSK(PCIE0), 0xe0000001); /* 512MB region, valid */
+ break;
+
+ case 1:
+ if (ppc440spe_revB()) {
+ mtdcr(DCRN_PEGPL_CFGBAH(PCIE1), 0x0000000d);
+ mtdcr(DCRN_PEGPL_CFGBAL(PCIE1), 0x20000000);
+ } else {
+ mtdcr(DCRN_PEGPL_CFGBAH(PCIE1), 0x0000000c);
+ mtdcr(DCRN_PEGPL_CFGBAL(PCIE1), 0x80000000);
+ }
+ mtdcr(DCRN_PEGPL_CFGMSK(PCIE1), 0xe0000001); /* 512MB region, valid */
+ break;
+
+ case 2:
+ if (ppc440spe_revB()) {
+ mtdcr(DCRN_PEGPL_CFGBAH(PCIE2), 0x0000000d);
+ mtdcr(DCRN_PEGPL_CFGBAL(PCIE2), 0x40000000);
+ } else {
+ mtdcr(DCRN_PEGPL_CFGBAH(PCIE2), 0x0000000c);
+ mtdcr(DCRN_PEGPL_CFGBAL(PCIE2), 0xc0000000);
+ }
+ mtdcr(DCRN_PEGPL_CFGMSK(PCIE2), 0xe0000001); /* 512MB region, valid */
+ break;
+ }
+
+ /*
+ * Check for VC0 active and assert RDY.
+ */
+ attempts = 10;
+ switch (port) {
+ case 0:
+ while(!(SDR_READ(PESDR0_RCSSTS) & (1 << 16))) {
+ if (!(attempts--)) {
+ printf("PCIE0: VC0 not active\n");
+ return -1;
+ }
+ mdelay(1000);
+ }
+ SDR_WRITE(PESDR0_RCSSET, SDR_READ(PESDR0_RCSSET) | 1 << 20);
+ break;
+ case 1:
+ while(!(SDR_READ(PESDR1_RCSSTS) & (1 << 16))) {
+ if (!(attempts--)) {
+ printf("PCIE1: VC0 not active\n");
+ return -1;
+ }
+ mdelay(1000);
+ }
+
+ SDR_WRITE(PESDR1_RCSSET, SDR_READ(PESDR1_RCSSET) | 1 << 20);
+ break;
+ case 2:
+ while(!(SDR_READ(PESDR2_RCSSTS) & (1 << 16))) {
+ if (!(attempts--)) {
+ printf("PCIE2: VC0 not active\n");
+ return -1;
+ }
+ mdelay(1000);
+ }
+
+ SDR_WRITE(PESDR2_RCSSET, SDR_READ(PESDR2_RCSSET) | 1 << 20);
+ break;
+ }
+ mdelay(100);
+
+ return 0;
+}
+
+int ppc440spe_init_pcie_endport(int port)
+{
+ static int core_init;
+ volatile u32 val = 0;
+ int attempts;
+
+ if (!core_init) {
+ ++core_init;
+ if (ppc440spe_init_pcie())
+ return -1;
+ }
+
+ /*
+ * Initialize various parts of the PCI Express core for our port:
+ *
+ * - Set as a end port and enable max width
+ * (PXIE0 -> X8, PCIE1 and PCIE2 -> X4).
+ * - Set up UTL configuration.
+ * - Increase SERDES drive strength to levels suggested by AMCC.
+ * - De-assert RSTPYN, RSTDL and RSTGU.
+ *
+ * NOTICE for revB chip: PESDRn_UTLSET2 is not set - we leave it with
+ * default setting 0x11310000. The register has new fields,
+ * PESDRn_UTLSET2[LKINE] in particular: clearing it leads to PCIE core
+ * hang.
+ */
+ switch (port) {
+ case 0:
+ SDR_WRITE(PESDR0_DLPSET, 1 << 24 | PTYPE_LEGACY_ENDPOINT << 20 | LNKW_X8 << 12);
+
+ SDR_WRITE(PESDR0_UTLSET1, 0x20222222);
+ if (!ppc440spe_revB())
+ SDR_WRITE(PESDR0_UTLSET2, 0x11000000);
+ SDR_WRITE(PESDR0_HSSL0SET1, 0x35000000);
+ SDR_WRITE(PESDR0_HSSL1SET1, 0x35000000);
+ SDR_WRITE(PESDR0_HSSL2SET1, 0x35000000);
+ SDR_WRITE(PESDR0_HSSL3SET1, 0x35000000);
+ SDR_WRITE(PESDR0_HSSL4SET1, 0x35000000);
+ SDR_WRITE(PESDR0_HSSL5SET1, 0x35000000);
+ SDR_WRITE(PESDR0_HSSL6SET1, 0x35000000);
+ SDR_WRITE(PESDR0_HSSL7SET1, 0x35000000);
+ SDR_WRITE(PESDR0_RCSSET,
+ (SDR_READ(PESDR0_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
+ break;
+
+ case 1:
+ SDR_WRITE(PESDR1_DLPSET, 1 << 24 | PTYPE_LEGACY_ENDPOINT << 20 | LNKW_X4 << 12);
+ SDR_WRITE(PESDR1_UTLSET1, 0x20222222);
+ if (!ppc440spe_revB())
+ SDR_WRITE(PESDR1_UTLSET2, 0x11000000);
+ SDR_WRITE(PESDR1_HSSL0SET1, 0x35000000);
+ SDR_WRITE(PESDR1_HSSL1SET1, 0x35000000);
+ SDR_WRITE(PESDR1_HSSL2SET1, 0x35000000);
+ SDR_WRITE(PESDR1_HSSL3SET1, 0x35000000);
+ SDR_WRITE(PESDR1_RCSSET,
+ (SDR_READ(PESDR1_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
+ break;
+
+ case 2:
+ SDR_WRITE(PESDR2_DLPSET, 1 << 24 | PTYPE_LEGACY_ENDPOINT << 20 | LNKW_X4 << 12);
+ SDR_WRITE(PESDR2_UTLSET1, 0x20222222);
+ if (!ppc440spe_revB())
+ SDR_WRITE(PESDR2_UTLSET2, 0x11000000);
+ SDR_WRITE(PESDR2_HSSL0SET1, 0x35000000);
+ SDR_WRITE(PESDR2_HSSL1SET1, 0x35000000);
+ SDR_WRITE(PESDR2_HSSL2SET1, 0x35000000);
+ SDR_WRITE(PESDR2_HSSL3SET1, 0x35000000);
+ SDR_WRITE(PESDR2_RCSSET,
(SDR_READ(PESDR2_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
break;
}
@@ -418,7 +671,6 @@ int ppc440spe_init_pcie_rootport(int port)
* PCIE1: 0xd_2000_0000
* PCIE2: 0xd_4000_0000
*/
-
switch (port) {
case 0:
if (ppc440spe_revB()) {
@@ -498,29 +750,33 @@ int ppc440spe_init_pcie_rootport(int port)
return 0;
}
-void ppc440spe_setup_pcie(struct pci_controller *hose, int port)
+void ppc440spe_setup_pcie_rootpoint(struct pci_controller *hose, int port)
{
volatile void *mbase = NULL;
+ volatile void *rmbase = NULL;
pci_set_ops(hose,
- pcie_read_config_byte,
- pcie_read_config_word,
- pcie_read_config_dword,
- pcie_write_config_byte,
- pcie_write_config_word,
- pcie_write_config_dword);
-
- switch(port) {
+ pcie_read_config_byte,
+ pcie_read_config_word,
+ pcie_read_config_dword,
+ pcie_write_config_byte,
+ pcie_write_config_word,
+ pcie_write_config_dword);
+
+ switch (port) {
case 0:
mbase = (u32 *)CFG_PCIE0_XCFGBASE;
+ rmbase = (u32 *)CFG_PCIE0_CFGBASE;
hose->cfg_data = (u8 *)CFG_PCIE0_CFGBASE;
break;
case 1:
mbase = (u32 *)CFG_PCIE1_XCFGBASE;
+ rmbase = (u32 *)CFG_PCIE1_CFGBASE;
hose->cfg_data = (u8 *)CFG_PCIE1_CFGBASE;
break;
case 2:
mbase = (u32 *)CFG_PCIE2_XCFGBASE;
+ rmbase = (u32 *)CFG_PCIE2_CFGBASE;
hose->cfg_data = (u8 *)CFG_PCIE2_CFGBASE;
break;
}
@@ -528,14 +784,9 @@ void ppc440spe_setup_pcie(struct pci_controller *hose, int port)
/*
* Set bus numbers on our root port
*/
- if (ppc440spe_revB()) {
- out_8((u8 *)mbase + PCI_PRIMARY_BUS, 0);
- out_8((u8 *)mbase + PCI_SECONDARY_BUS, 1);
- out_8((u8 *)mbase + PCI_SUBORDINATE_BUS, 1);
- } else {
- out_8((u8 *)mbase + PCI_PRIMARY_BUS, 0);
- out_8((u8 *)mbase + PCI_SECONDARY_BUS, 0);
- }
+ out_8((u8 *)mbase + PCI_PRIMARY_BUS, 0);
+ out_8((u8 *)mbase + PCI_SECONDARY_BUS, 1);
+ out_8((u8 *)mbase + PCI_SUBORDINATE_BUS, 1);
/*
* Set up outbound translation to hose->mem_space from PLB
@@ -544,8 +795,7 @@ void ppc440spe_setup_pcie(struct pci_controller *hose, int port)
* subregions and to enable the outbound translation.
*/
out_le32(mbase + PECFG_POM0LAH, 0x00000000);
- out_le32(mbase + PECFG_POM0LAL, (CFG_PCIE_MEMBASE +
- port * CFG_PCIE_MEMSIZE));
+ out_le32(mbase + PECFG_POM0LAL, 0x00000000);
switch (port) {
case 0:
@@ -579,14 +829,134 @@ void ppc440spe_setup_pcie(struct pci_controller *hose, int port)
out_le32(mbase + PCI_BASE_ADDRESS_1, 0);
out_le32(mbase + PECFG_BAR0HMPA, 0x7fffffc);
out_le32(mbase + PECFG_BAR0LMPA, 0);
+
+ out_le32(mbase + PECFG_PIM01SAH, 0xffff0000);
+ out_le32(mbase + PECFG_PIM01SAL, 0x00000000);
out_le32(mbase + PECFG_PIM0LAL, 0);
out_le32(mbase + PECFG_PIM0LAH, 0);
+ out_le32(mbase + PECFG_PIM1LAL, 0x00000000);
+ out_le32(mbase + PECFG_PIM1LAH, 0x00000004);
+ out_le32(mbase + PECFG_PIMEN, 0x1);
+
+ /* Enable I/O, Mem, and Busmaster cycles */
+ out_le16((u16 *)(mbase + PCI_COMMAND),
+ in_le16((u16 *)(mbase + PCI_COMMAND)) |
+ PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+ printf("PCIE:%d successfully set as rootpoint\n",port);
+}
+
+int ppc440spe_setup_pcie_endpoint(struct pci_controller *hose, int port)
+{
+ volatile void *mbase = NULL;
+ int attempts = 0;
+
+ pci_set_ops(hose,
+ pcie_read_config_byte,
+ pcie_read_config_word,
+ pcie_read_config_dword,
+ pcie_write_config_byte,
+ pcie_write_config_word,
+ pcie_write_config_dword);
+
+ switch (port) {
+ case 0:
+ mbase = (u32 *)CFG_PCIE0_XCFGBASE;
+ hose->cfg_data = (u8 *)CFG_PCIE0_CFGBASE;
+ break;
+ case 1:
+ mbase = (u32 *)CFG_PCIE1_XCFGBASE;
+ hose->cfg_data = (u8 *)CFG_PCIE1_CFGBASE;
+ break;
+ case 2:
+ mbase = (u32 *)CFG_PCIE2_XCFGBASE;
+ hose->cfg_data = (u8 *)CFG_PCIE2_CFGBASE;
+ break;
+ }
+
+ /*
+ * Set up outbound translation to hose->mem_space from PLB
+ * addresses at an offset of 0xd_0000_0000. We set the low
+ * bits of the mask to 11 to turn off splitting into 8
+ * subregions and to enable the outbound translation.
+ */
+ out_le32(mbase + PECFG_POM0LAH, 0x00001ff8);
+ out_le32(mbase + PECFG_POM0LAL, 0x00001000);
+
+ switch (port) {
+ case 0:
+ mtdcr(DCRN_PEGPL_OMR1BAH(PCIE0), 0x0000000d);
+ mtdcr(DCRN_PEGPL_OMR1BAL(PCIE0), CFG_PCIE_MEMBASE +
+ port * CFG_PCIE_MEMSIZE);
+ mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE0), 0x7fffffff);
+ mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE0),
+ ~(CFG_PCIE_MEMSIZE - 1) | 3);
+ break;
+ case 1:
+ mtdcr(DCRN_PEGPL_OMR1BAH(PCIE1), 0x0000000d);
+ mtdcr(DCRN_PEGPL_OMR1BAL(PCIE1), (CFG_PCIE_MEMBASE +
+ port * CFG_PCIE_MEMSIZE));
+ mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE1), 0x7fffffff);
+ mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE1),
+ ~(CFG_PCIE_MEMSIZE - 1) | 3);
+ break;
+ case 2:
+ mtdcr(DCRN_PEGPL_OMR1BAH(PCIE2), 0x0000000d);
+ mtdcr(DCRN_PEGPL_OMR1BAL(PCIE2), (CFG_PCIE_MEMBASE +
+ port * CFG_PCIE_MEMSIZE));
+ mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE2), 0x7fffffff);
+ mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE2),
+ ~(CFG_PCIE_MEMSIZE - 1) | 3);
+ break;
+ }
+
+ /* Set up 16GB inbound memory window at 0 */
+ out_le32(mbase + PCI_BASE_ADDRESS_0, 0);
+ out_le32(mbase + PCI_BASE_ADDRESS_1, 0);
+ out_le32(mbase + PECFG_BAR0HMPA, 0x7fffffc);
+ out_le32(mbase + PECFG_BAR0LMPA, 0);
+ out_le32(mbase + PECFG_PIM0LAL, 0x00000000);
+ out_le32(mbase + PECFG_PIM0LAH, 0x00000004); /* pointing to SRAM */
out_le32(mbase + PECFG_PIMEN, 0x1);
/* Enable I/O, Mem, and Busmaster cycles */
out_le16((u16 *)(mbase + PCI_COMMAND),
in_le16((u16 *)(mbase + PCI_COMMAND)) |
PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+ out_le16(mbase + 0x200,0xcaad); /* Setting vendor ID */
+ out_le16(mbase + 0x202,0xfeed); /* Setting device ID */
+ attempts = 10;
+ switch (port) {
+ case 0:
+ while (!(SDR_READ(PESDR0_RCSSTS) & (1 << 8))) {
+ if (!(attempts--)) {
+ printf("PCIE0: BMEN is not active\n");
+ return -1;
+ }
+ mdelay(1000);
+ }
+ break;
+ case 1:
+ while (!(SDR_READ(PESDR1_RCSSTS) & (1 << 8))) {
+ if (!(attempts--)) {
+ printf("PCIE1: BMEN is not active\n");
+ return -1;
+ }
+ mdelay(1000);
+ }
+ break;
+ case 2:
+ while (!(SDR_READ(PESDR2_RCSSTS) & (1 << 8))) {
+ if (!(attempts--)) {
+ printf("PCIE2: BMEN is not active\n");
+ return -1;
+ }
+ mdelay(1000);
+ }
+ break;
+ }
+ printf("PCIE:%d successfully set as endpoint\n",port);
+
+ return 0;
}
#endif /* CONFIG_PCI */
#endif /* CONFIG_440SPE */
diff --git a/cpu/ppc4xx/440spe_pcie.h b/cpu/ppc4xx/440spe_pcie.h
index 47df762..2becc77 100644
--- a/cpu/ppc4xx/440spe_pcie.h
+++ b/cpu/ppc4xx/440spe_pcie.h
@@ -139,9 +139,17 @@
*/
#define PECFG_BAR0LMPA 0x210
#define PECFG_BAR0HMPA 0x214
+#define PECFG_BAR1MPA 0x218
+#define PECFG_BAR2MPA 0x220
+
#define PECFG_PIMEN 0x33c
#define PECFG_PIM0LAL 0x340
#define PECFG_PIM0LAH 0x344
+#define PECFG_PIM1LAL 0x348
+#define PECFG_PIM1LAH 0x34c
+#define PECFG_PIM01SAL 0x350
+#define PECFG_PIM01SAH 0x354
+
#define PECFG_POM0LAL 0x380
#define PECFG_POM0LAH 0x384
@@ -156,7 +164,8 @@
int ppc440spe_init_pcie(void);
int ppc440spe_init_pcie_rootport(int port);
void yucca_setup_pcie_fpga_rootpoint(int port);
-void ppc440spe_setup_pcie(struct pci_controller *hose, int port);
+void ppc440spe_setup_pcie_rootpoint(struct pci_controller *hose, int port);
+int ppc440spe_setup_pcie_endpoint(struct pci_controller *hose, int port);
int yucca_pcie_card_present(int port);
int pcie_hose_scan(struct pci_controller *hose, int bus);
#endif /* __440SPE_PCIE_H */
diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c
index d166993..81d49ff 100644
--- a/cpu/ppc4xx/4xx_enet.c
+++ b/cpu/ppc4xx/4xx_enet.c
@@ -130,7 +130,17 @@
#define BI_PHYMODE_NONE 0
#define BI_PHYMODE_ZMII 1
#define BI_PHYMODE_RGMII 2
+#define BI_PHYMODE_GMII 3
+#define BI_PHYMODE_RTBI 4
+#define BI_PHYMODE_TBI 5
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#define BI_PHYMODE_SMII 6
+#define BI_PHYMODE_MII 7
+#endif
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#define SDR0_MFR_ETH_CLK_SEL_V(n) ((0x01<<27) / (n+1))
+#endif
/*-----------------------------------------------------------------------------+
* Global variables. TX and RX descriptors and buffers.
@@ -181,7 +191,7 @@ static void ppc_4xx_eth_halt (struct eth_device *dev)
{
EMAC_4XX_HW_PST hw_p = dev->priv;
uint32_t failsafe = 10000;
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
unsigned long mfr;
#endif
@@ -205,19 +215,19 @@ static void ppc_4xx_eth_halt (struct eth_device *dev)
}
/* EMAC RESET */
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
/* provide clocks for EMAC internal loopback */
mfsdr (sdr_mfr, mfr);
- mfr |= 0x08000000;
+ mfr |= SDR0_MFR_ETH_CLK_SEL_V(hw_p->devnum);
mtsdr(sdr_mfr, mfr);
#endif
out32 (EMAC_M0 + hw_p->hw_addr, EMAC_M0_SRST);
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
/* remove clocks for EMAC internal loopback */
mfsdr (sdr_mfr, mfr);
- mfr &= ~0x08000000;
+ mfr &= ~SDR0_MFR_ETH_CLK_SEL_V(hw_p->devnum);
mtsdr(sdr_mfr, mfr);
#endif
@@ -317,10 +327,50 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis)
out32 (RGMII_FER, rmiifer);
return ((int)pfc1);
-
}
#endif /* CONFIG_440_GX */
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis)
+{
+ unsigned long zmiifer=0x0;
+
+ /*
+ * Right now only 2*RGMII is supported. Please extend when needed.
+ * sr - 2006-08-29
+ */
+ switch (1) {
+ case 0:
+ /* 1 x GMII port */
+ out32 (ZMII_FER, 0x00);
+ out32 (RGMII_FER, 0x00000037);
+ bis->bi_phymode[0] = BI_PHYMODE_GMII;
+ bis->bi_phymode[1] = BI_PHYMODE_NONE;
+ break;
+ case 1:
+ /* 2 x RGMII ports */
+ out32 (ZMII_FER, 0x00);
+ out32 (RGMII_FER, 0x00000055);
+ bis->bi_phymode[0] = BI_PHYMODE_RGMII;
+ bis->bi_phymode[1] = BI_PHYMODE_RGMII;
+ break;
+ case 2:
+ /* 2 x SMII ports */
+
+ break;
+ default:
+ break;
+ }
+
+ /* Ensure we setup mdio for this devnum and ONLY this devnum */
+ zmiifer = in32 (ZMII_FER);
+ zmiifer |= (ZMII_FER_MDI) << ZMII_FER_V(devnum);
+ out32 (ZMII_FER, zmiifer);
+
+ return ((int)0x0);
+}
+#endif /* CONFIG_440EPX */
+
static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
{
int i, j;
@@ -332,13 +382,16 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
unsigned mode_reg;
unsigned short devnum;
unsigned short reg_short;
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE)
sys_info_t sysinfo;
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
int ethgroup = -1;
#endif
#endif
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || defined(CONFIG_440SPE)
unsigned long mfr;
#endif
@@ -352,7 +405,9 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
return -1;
}
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE)
/* Need to get the OPB frequency so we can access the PHY */
get_sys_info (&sysinfo);
#endif
@@ -407,7 +462,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
out32 (ZMII_FER, (ZMII_FER_RMII | ZMII_FER_MDI) << ZMII_FER_V (devnum));
-#elif defined(CONFIG_440GX)
+#elif defined(CONFIG_440GX) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
ethgroup = ppc_4xx_eth_setup_bridge(devnum, bis);
#elif defined(CONFIG_440GP)
/* set RMII mode */
@@ -429,10 +484,10 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
__asm__ volatile ("eieio");
/* reset emac so we have access to the phy */
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
/* provide clocks for EMAC internal loopback */
mfsdr (sdr_mfr, mfr);
- mfr |= 0x08000000;
+ mfr |= SDR0_MFR_ETH_CLK_SEL_V(devnum);
mtsdr(sdr_mfr, mfr);
#endif
@@ -444,15 +499,19 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
udelay (1000);
failsafe--;
}
+ if (failsafe <= 0)
+ printf("\nProblem resetting EMAC!\n");
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
/* remove clocks for EMAC internal loopback */
mfsdr (sdr_mfr, mfr);
- mfr &= ~0x08000000;
+ mfr &= ~SDR0_MFR_ETH_CLK_SEL_V(devnum);
mtsdr(sdr_mfr, mfr);
#endif
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE)
/* Whack the M1 register */
mode_reg = 0x0;
mode_reg &= ~0x00000038;
@@ -517,15 +576,24 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
reg_short |= (1 << 7) | (1 << 1) | (1 << 0);
miiphy_write (dev->name, reg, 0x14, reg_short);
#endif
+#if defined(CONFIG_M88E1111_PHY) /* test-only: merge with CONFIG_88E1111_CLK_DELAY !!! */
+ miiphy_write (dev->name, reg, 0x14, 0x0ce3);
+ miiphy_write (dev->name, reg, 0x18, 0x4101);
+ miiphy_write (dev->name, reg, 0x09, 0x0e00);
+ miiphy_write (dev->name, reg, 0x04, 0x01e1);
+#endif
miiphy_reset (dev->name, reg);
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+
#if defined(CONFIG_CIS8201_PHY)
/*
* Cicada 8201 PHY needs to have an extended register whacked
* for RGMII mode.
*/
- if ( ((devnum == 2) || (devnum ==3)) && (4 == ethgroup) ) {
+ if (((devnum == 2) || (devnum == 3)) && (4 == ethgroup)) {
#if defined(CONFIG_CIS8201_SHORT_ETCH)
miiphy_write (dev->name, reg, 23, 0x1300);
#else
@@ -595,7 +663,8 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
(int) speed, (duplex == HALF) ? "HALF" : "FULL");
}
-#if defined(CONFIG_440) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE)
+#if defined(CONFIG_440) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) && \
+ !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX)
#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
mfsdr(sdr_mfr, reg);
if (speed == 100) {
@@ -618,15 +687,34 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
reg = (RGMII_SSR_SP_1000MBPS << RGMII_SSR_V (devnum));
else if (speed == 100)
reg = (RGMII_SSR_SP_100MBPS << RGMII_SSR_V (devnum));
- else
+ else if (speed == 10)
reg = (RGMII_SSR_SP_10MBPS << RGMII_SSR_V (devnum));
-
+ else {
+ printf("Error in RGMII Speed\n");
+ return -1;
+ }
out32 (RGMII_SSR, reg);
}
#endif /* defined(CONFIG_440) && !defined(CONFIG_440SP) */
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+ if (speed == 1000)
+ reg = (RGMII_SSR_SP_1000MBPS << RGMII_SSR_V (devnum));
+ else if (speed == 100)
+ reg = (RGMII_SSR_SP_100MBPS << RGMII_SSR_V (devnum));
+ else if (speed == 10)
+ reg = (RGMII_SSR_SP_10MBPS << RGMII_SSR_V (devnum));
+ else {
+ printf("Error in RGMII Speed\n");
+ return -1;
+ }
+ out32 (RGMII_SSR, reg);
+#endif
+
/* set the Mal configuration reg */
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE)
mtdcr (malmcr, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA |
MAL_CR_PLBLT_DEFAULT | MAL_CR_EOPIE | 0x00330000);
#else
@@ -810,8 +898,10 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
/* set speed */
if (speed == _1000BASET) {
-#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
unsigned long pfc1;
+
mfsdr (sdr_pfc1, pfc1);
pfc1 |= SDR0_PFC1_EM_1000;
mtsdr (sdr_pfc1, pfc1);
@@ -957,6 +1047,14 @@ static int ppc_4xx_eth_send (struct eth_device *dev, volatile void *ptr,
#define UIC0SR uic0sr
#endif
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#define UICMSR_ETHX uic0msr
+#define UICSR_ETHX uic0sr
+#else
+#define UICMSR_ETHX uic1msr
+#define UICSR_ETHX uic1sr
+#endif
+
int enetInt (struct eth_device *dev)
{
int serviced;
@@ -965,6 +1063,7 @@ int enetInt (struct eth_device *dev)
unsigned long emac_isr = 0;
unsigned long mal_rx_eob;
unsigned long my_uic0msr, my_uic1msr;
+ unsigned long my_uicmsr_ethx;
#if defined(CONFIG_440GX)
unsigned long my_uic2msr;
@@ -992,8 +1091,11 @@ int enetInt (struct eth_device *dev)
#if defined(CONFIG_440GX)
my_uic2msr = mfdcr (uic2msr);
#endif
+ my_uicmsr_ethx = mfdcr (UICMSR_ETHX);
+
if (!(my_uic0msr & (UIC_MRE | UIC_MTE))
- && !(my_uic1msr & (UIC_ETH0 | UIC_ETH1 | UIC_MS | UIC_MTDE | UIC_MRDE))) {
+ && !(my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))
+ && !(my_uicmsr_ethx & (UIC_ETH0 | UIC_ETH1))) {
/* not for us */
return (rc);
}
@@ -1012,8 +1114,7 @@ int enetInt (struct eth_device *dev)
mal_isr = mfdcr (malesr);
/* look for mal error */
if (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE)) {
- mal_err (dev, mal_isr, my_uic0msr,
- MAL_UIC_DEF, MAL_UIC_ERR);
+ mal_err (dev, mal_isr, my_uic1msr, MAL_UIC_DEF, MAL_UIC_ERR);
serviced = 1;
rc = 0;
}
@@ -1021,7 +1122,7 @@ int enetInt (struct eth_device *dev)
/* port by port dispatch of emac interrupts */
if (hw_p->devnum == 0) {
- if (UIC_ETH0 & my_uic1msr) { /* look for EMAC errors */
+ if (UIC_ETH0 & my_uicmsr_ethx) { /* look for EMAC errors */
emac_isr = in32 (EMAC_ISR + hw_p->hw_addr);
if ((hw_p->emac_ier & emac_isr) != 0) {
emac_err (dev, emac_isr);
@@ -1032,14 +1133,15 @@ int enetInt (struct eth_device *dev)
if ((hw_p->emac_ier & emac_isr)
|| (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) {
mtdcr (UIC0SR, UIC_MRE | UIC_MTE); /* Clear */
- mtdcr (uic1sr, UIC_ETH0 | UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
+ mtdcr (uic1sr, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
+ mtdcr (UICSR_ETHX, UIC_ETH0); /* Clear */
return (rc); /* we had errors so get out */
}
}
#if !defined(CONFIG_440SP)
if (hw_p->devnum == 1) {
- if (UIC_ETH1 & my_uic1msr) { /* look for EMAC errors */
+ if (UIC_ETH1 & my_uicmsr_ethx) { /* look for EMAC errors */
emac_isr = in32 (EMAC_ISR + hw_p->hw_addr);
if ((hw_p->emac_ier & emac_isr) != 0) {
emac_err (dev, emac_isr);
@@ -1050,7 +1152,8 @@ int enetInt (struct eth_device *dev)
if ((hw_p->emac_ier & emac_isr)
|| (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) {
mtdcr (UIC0SR, UIC_MRE | UIC_MTE); /* Clear */
- mtdcr (uic1sr, UIC_ETH1 | UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
+ mtdcr (uic1sr, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
+ mtdcr (UICSR_ETHX, UIC_ETH1); /* Clear */
return (rc); /* we had errors so get out */
}
}
@@ -1117,10 +1220,10 @@ int enetInt (struct eth_device *dev)
mtdcr (uic1sr, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */
switch (hw_p->devnum) {
case 0:
- mtdcr (uic1sr, UIC_ETH0);
+ mtdcr (UICSR_ETHX, UIC_ETH0);
break;
case 1:
- mtdcr (uic1sr, UIC_ETH1);
+ mtdcr (UICSR_ETHX, UIC_ETH1);
break;
#if defined (CONFIG_440GX)
case 2:
@@ -1527,7 +1630,7 @@ int ppc_4xx_eth_initialize (bd_t * bis)
if (0 == virgin) {
/* set the MAL IER ??? names may change with new spec ??? */
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
mal_ier =
MAL_IER_PT | MAL_IER_PRE | MAL_IER_PWE |
MAL_IER_DE | MAL_IER_OTE | MAL_IER_OE | MAL_IER_PE ;
diff --git a/cpu/ppc4xx/Makefile b/cpu/ppc4xx/Makefile
index 7d6990f..16dc8d6 100644
--- a/cpu/ppc4xx/Makefile
+++ b/cpu/ppc4xx/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,29 +23,31 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o resetvec.o kgdb.o
-AOBJS = dcr.o
+SOBJS = dcr.o
COBJS = 405gp_pci.o 4xx_enet.o \
bedbug_405.o commproc.o \
cpu.o cpu_init.o i2c.o interrupts.o \
- miiphy.o sdram.o serial.o \
+ miiphy.o ndfc.o sdram.o serial.o \
spd_sdram.o speed.o traps.o usb_ohci.o usbdev.o \
440spe_pcie.o
-OBJS = $(AOBJS) $(COBJS)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
-all: .depend $(START) $(LIB)
+all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c
index bc51fbf..94478db 100644
--- a/cpu/ppc4xx/cpu.c
+++ b/cpu/ppc4xx/cpu.c
@@ -41,14 +41,15 @@
DECLARE_GLOBAL_DATA_PTR;
#endif
-
#if defined(CONFIG_440)
#define FREQ_EBC (sys_info.freqEPB)
#else
#define FREQ_EBC (sys_info.freqPLB / sys_info.pllExtBusDiv)
#endif
-#if defined(CONFIG_405GP) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_405GP) || \
+ defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#define PCI_ASYNC
@@ -58,7 +59,8 @@ int pci_async_enabled(void)
return (mfdcr(strap) & PSR_PCI_ASYNC_EN);
#endif
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
unsigned long val;
mfsdr(sdr_sdstp1, val);
@@ -82,9 +84,10 @@ int pci_arbiter_enabled(void)
return (mfdcr(cpc0_strp1) & CPC0_STRP1_PAE_MASK);
#endif
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || \
- defined(CONFIG_440GR) || defined(CONFIG_440SP) || \
- defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || \
+ defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE)
unsigned long val;
mfsdr(sdr_sdstp1, val);
@@ -93,8 +96,10 @@ int pci_arbiter_enabled(void)
}
#endif
-#if defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#if defined(CONFIG_405EP) || defined(CONFIG_440GX) || \
+ defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE)
#define I2C_BOOTROM
@@ -102,17 +107,75 @@ int i2c_bootrom_enabled(void)
{
#if defined(CONFIG_405EP)
return (mfdcr(cpc0_boot) & CPC0_BOOT_SEP);
-#endif
-
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || \
- defined(CONFIG_440GR) || defined(CONFIG_440SP) || \
- defined(CONFIG_440SPE)
+#else
unsigned long val;
mfsdr(sdr_sdcs, val);
return (val & SDR0_SDCS_SDD);
#endif
}
+
+#if defined(CONFIG_440GX)
+#define SDR0_PINSTP_SHIFT 29
+static char *bootstrap_str[] = {
+ "EBC (16 bits)",
+ "EBC (8 bits)",
+ "EBC (32 bits)",
+ "EBC (8 bits)",
+ "PCI",
+ "I2C (Addr 0x54)",
+ "Reserved",
+ "I2C (Addr 0x50)",
+};
+#endif
+
+#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#define SDR0_PINSTP_SHIFT 30
+static char *bootstrap_str[] = {
+ "EBC (8 bits)",
+ "PCI",
+ "I2C (Addr 0x54)",
+ "I2C (Addr 0x50)",
+};
+#endif
+
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#define SDR0_PINSTP_SHIFT 29
+static char *bootstrap_str[] = {
+ "EBC (8 bits)",
+ "PCI",
+ "NAND (8 bits)",
+ "EBC (16 bits)",
+ "EBC (16 bits)",
+ "I2C (Addr 0x54)",
+ "PCI",
+ "I2C (Addr 0x52)",
+};
+#endif
+
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#define SDR0_PINSTP_SHIFT 29
+static char *bootstrap_str[] = {
+ "EBC (8 bits)",
+ "EBC (16 bits)",
+ "EBC (16 bits)",
+ "NAND (8 bits)",
+ "PCI",
+ "I2C (Addr 0x54)",
+ "PCI",
+ "I2C (Addr 0x52)",
+};
+#endif
+
+#if defined(SDR0_PINSTP_SHIFT)
+static int bootstrap_option(void)
+{
+ unsigned long val;
+
+ mfsdr(sdr_pinstp, val);
+ return ((val & 0xe0000000) >> SDR0_PINSTP_SHIFT);
+}
+#endif /* SDR0_PINSTP_SHIFT */
#endif
@@ -244,6 +307,22 @@ int checkcpu (void)
#endif /* CONFIG_440GR */
#endif /* CONFIG_440 */
+ case PVR_440EPX1_RA:
+ puts("EPx Rev. A - Security/Kasumi support");
+ break;
+
+ case PVR_440EPX2_RA:
+ puts("EPx Rev. A - No Security/Kasumi support");
+ break;
+
+ case PVR_440GRX1_RA:
+ puts("GRx Rev. A - Security/Kasumi support");
+ break;
+
+ case PVR_440GRX2_RA:
+ puts("GRx Rev. A - No Security/Kasumi support");
+ break;
+
case PVR_440SP_RA:
puts("SP Rev. A");
break;
@@ -272,6 +351,10 @@ int checkcpu (void)
#if defined(I2C_BOOTROM)
printf (" I2C boot EEPROM %sabled\n", i2c_bootrom_enabled() ? "en" : "dis");
+#if defined(SDR0_PINSTP_SHIFT)
+ printf (" Bootstrap Option %c - ", (char)bootstrap_option() + 'A');
+ printf ("Boot ROM Location %s\n", bootstrap_str[bootstrap_option()]);
+#endif
#endif
#if defined(CONFIG_PCI)
diff --git a/cpu/ppc4xx/interrupts.c b/cpu/ppc4xx/interrupts.c
index 886f405..c5a9f02 100644
--- a/cpu/ppc4xx/interrupts.c
+++ b/cpu/ppc4xx/interrupts.c
@@ -57,12 +57,13 @@ static struct irq_action irq_vecs1[32]; /* For UIC1 */
void uic1_interrupt( void * parms); /* UIC1 handler */
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
static struct irq_action irq_vecs2[32]; /* For UIC2 */
void uic2_interrupt( void * parms); /* UIC2 handler */
#endif /* CONFIG_440GX CONFIG_440SPE */
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
static struct irq_action irq_vecs3[32]; /* For UIC3 */
void uic3_interrupt( void * parms); /* UIC3 handler */
#endif /* CONFIG_440SPE */
@@ -119,12 +120,13 @@ int interrupt_init_cpu (unsigned *decrementer_count)
irq_vecs1[vec].handler = NULL;
irq_vecs1[vec].arg = NULL;
irq_vecs1[vec].count = 0;
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
irq_vecs2[vec].handler = NULL;
irq_vecs2[vec].arg = NULL;
irq_vecs2[vec].count = 0;
#endif /* CONFIG_440GX */
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
irq_vecs3[vec].handler = NULL;
irq_vecs3[vec].arg = NULL;
irq_vecs3[vec].count = 0;
@@ -230,6 +232,32 @@ void external_interrupt(struct pt_regs *regs)
} /* external_interrupt CONFIG_440GX */
+#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+void external_interrupt(struct pt_regs *regs)
+{
+ ulong uic_msr;
+
+ /*
+ * Read masked interrupt status register to determine interrupt source
+ */
+ /* 440 SPe uses base uic register */
+ uic_msr = mfdcr(uic0msr);
+
+ if ( (UICB0_UIC1CI & uic_msr) || (UICB0_UIC1NCI & uic_msr) )
+ uic1_interrupt(0);
+
+ if ( (UICB0_UIC2CI & uic_msr) || (UICB0_UIC2NCI & uic_msr) )
+ uic2_interrupt(0);
+
+ if (uic_msr & ~(UICB0_ALL))
+ uic0_interrupt(0);
+
+ mtdcr(uic0sr, uic_msr);
+
+ return;
+
+} /* external_interrupt CONFIG_440EPX & CONFIG_440GRX */
+
#elif defined(CONFIG_440SPE)
void external_interrupt(struct pt_regs *regs)
{
@@ -303,7 +331,8 @@ void external_interrupt(struct pt_regs *regs)
}
#endif
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
/* Handler for UIC0 interrupt */
void uic0_interrupt( void * parms)
{
@@ -394,7 +423,8 @@ void uic1_interrupt( void * parms)
}
#endif /* defined(CONFIG_440) */
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
/* Handler for UIC2 interrupt */
void uic2_interrupt( void * parms)
{
@@ -496,7 +526,8 @@ void irq_install_handler (int vec, interrupt_handler_t * handler, void *arg)
int i = vec;
#if defined(CONFIG_440)
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
if ((vec > 31) && (vec < 64)) {
i = vec - 32;
irqa = irq_vecs1;
@@ -523,7 +554,8 @@ void irq_install_handler (int vec, interrupt_handler_t * handler, void *arg)
irqa[i].arg = arg;
#if defined(CONFIG_440)
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
if ((vec > 31) && (vec < 64))
mtdcr (uic1er, mfdcr (uic1er) | (0x80000000 >> i));
else if (vec > 63)
@@ -546,7 +578,8 @@ void irq_free_handler (int vec)
int i = vec;
#if defined(CONFIG_440)
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
if ((vec > 31) && (vec < 64)) {
irqa = irq_vecs1;
i = vec - 32;
@@ -567,7 +600,8 @@ void irq_free_handler (int vec)
#endif
#if defined(CONFIG_440)
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
if ((vec > 31) && (vec < 64))
mtdcr (uic1er, mfdcr (uic1er) & ~(0x80000000 >> i));
else if (vec > 63)
@@ -635,7 +669,8 @@ do_irqinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
printf("\n");
#endif
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
printf ("\nUIC 2\n");
printf ("Nr Routine Arg Count\n");
diff --git a/cpu/ppc4xx/miiphy.c b/cpu/ppc4xx/miiphy.c
index aa580ed..6b98025 100644
--- a/cpu/ppc4xx/miiphy.c
+++ b/cpu/ppc4xx/miiphy.c
@@ -173,7 +173,8 @@ int emac4xx_miiphy_read (char *devname, unsigned char addr,
}
sta_reg = reg; /* reg address */
/* set clock (50Mhz) and read flags */
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#if defined(CONFIG_IBM_EMAC4_V4) /* EMAC4 V4 changed bit setting */
sta_reg = (sta_reg & ~EMAC_STACR_OP_MASK) | EMAC_STACR_READ;
#else
@@ -183,7 +184,9 @@ int emac4xx_miiphy_read (char *devname, unsigned char addr,
sta_reg = (sta_reg | EMAC_STACR_READ) & ~EMAC_STACR_CLK_100MHZ;
#endif
-#if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440GX) && !defined(CONFIG__440SP) && !defined(CONFIG__440SPE)
+#if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440GX) && \
+ !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) && \
+ !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX)
sta_reg = sta_reg | CONFIG_PHY_CLK_FREQ;
#endif
sta_reg = sta_reg | (addr << 5); /* Phy address */
@@ -244,7 +247,8 @@ int emac4xx_miiphy_write (char *devname, unsigned char addr,
sta_reg = 0;
sta_reg = reg; /* reg address */
/* set clock (50Mhz) and read flags */
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#if defined(CONFIG_IBM_EMAC4_V4) /* EMAC4 V4 changed bit setting */
sta_reg = (sta_reg & ~EMAC_STACR_OP_MASK) | EMAC_STACR_WRITE;
#else
@@ -254,7 +258,9 @@ int emac4xx_miiphy_write (char *devname, unsigned char addr,
sta_reg = (sta_reg | EMAC_STACR_WRITE) & ~EMAC_STACR_CLK_100MHZ;
#endif
-#if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440GX) && !defined(CONFIG__440SP) && !defined(CONFIG__440SPE)
+#if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440GX) && \
+ !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) && \
+ !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX)
sta_reg = sta_reg | CONFIG_PHY_CLK_FREQ; /* Set clock frequency (PLB freq. dependend) */
#endif
sta_reg = sta_reg | ((unsigned long) addr << 5);/* Phy address */
diff --git a/cpu/ppc4xx/ndfc.c b/cpu/ppc4xx/ndfc.c
new file mode 100644
index 0000000..c255f93
--- /dev/null
+++ b/cpu/ppc4xx/ndfc.c
@@ -0,0 +1,175 @@
+/*
+ * Overview:
+ * Platform independend driver for NDFC (NanD Flash Controller)
+ * integrated into EP440 cores
+ *
+ * (C) Copyright 2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * Based on original work by
+ * Thomas Gleixner
+ * Copyright 2006 IBM
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_NAND) && !defined(CFG_NAND_LEGACY) && \
+ (defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX))
+
+#include <nand.h>
+#include <linux/mtd/ndfc.h>
+#include <asm/processor.h>
+#include <ppc440.h>
+
+static u8 hwctl = 0;
+
+static void ndfc_hwcontrol(struct mtd_info *mtdinfo, int cmd)
+{
+ switch (cmd) {
+ case NAND_CTL_SETCLE:
+ hwctl |= 0x1;
+ break;
+
+ case NAND_CTL_CLRCLE:
+ hwctl &= ~0x1;
+ break;
+
+ case NAND_CTL_SETALE:
+ hwctl |= 0x2;
+ break;
+
+ case NAND_CTL_CLRALE:
+ hwctl &= ~0x2;
+ break;
+ }
+}
+
+static void ndfc_write_byte(struct mtd_info *mtdinfo, u_char byte)
+{
+ struct nand_chip *this = mtdinfo->priv;
+ ulong base = (ulong) this->IO_ADDR_W;
+
+ if (hwctl & 0x1)
+ out8(base + NDFC_CMD, byte);
+ else if (hwctl & 0x2)
+ out8(base + NDFC_ALE, byte);
+ else
+ out8(base + NDFC_DATA, byte);
+}
+
+static u_char ndfc_read_byte(struct mtd_info *mtdinfo)
+{
+ struct nand_chip *this = mtdinfo->priv;
+ ulong base = (ulong) this->IO_ADDR_W;
+
+ return (in8(base + NDFC_DATA));
+}
+
+static int ndfc_dev_ready(struct mtd_info *mtdinfo)
+{
+ struct nand_chip *this = mtdinfo->priv;
+ ulong base = (ulong) this->IO_ADDR_W;
+
+ while (!(in32(base + NDFC_STAT) & NDFC_STAT_IS_READY))
+ ;
+
+ return 1;
+}
+
+#ifndef CONFIG_NAND_SPL
+/*
+ * Don't use these speedup functions in NAND boot image, since the image
+ * has to fit into 4kByte.
+ */
+
+/*
+ * Speedups for buffer read/write/verify
+ *
+ * NDFC allows 32bit read/write of data. So we can speed up the buffer
+ * functions. No further checking, as nand_base will always read/write
+ * page aligned.
+ */
+static void ndfc_read_buf(struct mtd_info *mtdinfo, uint8_t *buf, int len)
+{
+ struct nand_chip *this = mtdinfo->priv;
+ ulong base = (ulong) this->IO_ADDR_W;
+ uint32_t *p = (uint32_t *) buf;
+
+ for(;len > 0; len -= 4)
+ *p++ = in32(base + NDFC_DATA);
+}
+
+static void ndfc_write_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len)
+{
+ struct nand_chip *this = mtdinfo->priv;
+ ulong base = (ulong) this->IO_ADDR_W;
+ uint32_t *p = (uint32_t *) buf;
+
+ for(; len > 0; len -= 4)
+ out32(base + NDFC_DATA, *p++);
+}
+
+static int ndfc_verify_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len)
+{
+ struct nand_chip *this = mtdinfo->priv;
+ ulong base = (ulong) this->IO_ADDR_W;
+ uint32_t *p = (uint32_t *) buf;
+
+ for(; len > 0; len -= 4)
+ if (*p++ != in32(base + NDFC_DATA))
+ return -1;
+
+ return 0;
+}
+#endif /* #ifndef CONFIG_NAND_SPL */
+
+void board_nand_init(struct nand_chip *nand)
+{
+ nand->eccmode = NAND_ECC_SOFT;
+
+ nand->hwcontrol = ndfc_hwcontrol;
+ nand->read_byte = ndfc_read_byte;
+ nand->write_byte = ndfc_write_byte;
+ nand->dev_ready = ndfc_dev_ready;
+
+#ifndef CONFIG_NAND_SPL
+ nand->write_buf = ndfc_write_buf;
+ nand->read_buf = ndfc_read_buf;
+ nand->verify_buf = ndfc_verify_buf;
+#else
+ /*
+ * Setup EBC (CS0 only right now)
+ */
+ mtdcr(ebccfga, xbcfg);
+ mtdcr(ebccfgd, 0xb8400000);
+
+ mtebc(pb0cr, CFG_EBC_PB0CR);
+ mtebc(pb0ap, CFG_EBC_PB0AP);
+#endif
+
+ /* Set NandFlash Core Configuration Register */
+ /* Chip select 3, 1col x 2 rows */
+ out32(CFG_NAND_BASE + NDFC_CCR, 0x00000000 | (CFG_NAND_CS << 24));
+ out32(CFG_NAND_BASE + NDFC_BCFG0 + (CFG_NAND_CS << 2), 0x80002222);
+}
+
+#endif
diff --git a/cpu/ppc4xx/serial.c b/cpu/ppc4xx/serial.c
index ad3ca6e..fab0d95 100644
--- a/cpu/ppc4xx/serial.c
+++ b/cpu/ppc4xx/serial.c
@@ -264,10 +264,12 @@ int serial_tstc ()
#endif /* CONFIG_IOP480 */
/*****************************************************************************/
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) || defined(CONFIG_405EP)
+#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_405EP) || \
+ defined(CONFIG_440)
#if defined(CONFIG_440)
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#define UART0_BASE CFG_PERIPHERAL_BASE + 0x00000300
#define UART1_BASE CFG_PERIPHERAL_BASE + 0x00000400
#else
@@ -279,15 +281,34 @@ int serial_tstc ()
#define UART2_BASE CFG_PERIPHERAL_BASE + 0x00000600
#endif
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
-#define CR0_MASK 0xdfffffff
-#define CR0_EXTCLK_ENA 0x00800000
-#define CR0_UDIV_POS 0
-#else
+#if defined(CONFIG_440GP)
#define CR0_MASK 0x3fff0000
#define CR0_EXTCLK_ENA 0x00600000
#define CR0_UDIV_POS 16
-#endif /* CONFIG_440GX */
+#define UDIV_SUBTRACT 1
+#define UART0_SDR cntrl0
+#define MFREG(a, d) d = mfdcr(a)
+#define MTREG(a, d) mtdcr(a, d)
+#else /* #if defined(CONFIG_440GP) */
+/* all other 440 PPC's access clock divider via sdr register */
+#define CR0_MASK 0xdfffffff
+#define CR0_EXTCLK_ENA 0x00800000
+#define CR0_UDIV_POS 0
+#define UDIV_SUBTRACT 0
+#define UART0_SDR sdr_uart0
+#define UART1_SDR sdr_uart1
+#if defined(CONFIG_440EP) || defined(CONFIG_440EPx) || \
+ defined(CONFIG_440GR) || defined(CONFIG_440GRx) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPe)
+#define UART2_SDR sdr_uart2
+#endif
+#if defined(CONFIG_440EP) || defined(CONFIG_440EPx) || \
+ defined(CONFIG_440GR) || defined(CONFIG_440GRx)
+#define UART3_SDR sdr_uart3
+#endif
+#define MFREG(a, d) mfsdr(a, d)
+#define MTREG(a, d) mtsdr(a, d)
+#endif /* #if defined(CONFIG_440GP) */
#elif defined(CONFIG_405EP)
#define UART0_BASE 0xef600300
#define UART1_BASE 0xef600400
@@ -309,21 +330,15 @@ int serial_tstc ()
#if defined(CONFIG_UART1_CONSOLE)
#define ACTING_UART0_BASE UART1_BASE
#define ACTING_UART1_BASE UART0_BASE
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || \
- defined(CONFIG_440GR) || defined(CONFIG_440SP) || \
- defined(CONFIG_440SPE)
-#define UART0_SDR sdr_uart1
-#define UART1_SDR sdr_uart0
-#endif /* CONFIG_440GX */
#else
#define ACTING_UART0_BASE UART0_BASE
#define ACTING_UART1_BASE UART1_BASE
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || \
- defined(CONFIG_440GR) || defined(CONFIG_440SP) || \
- defined(CONFIG_440SPE)
-#define UART0_SDR sdr_uart0
-#define UART1_SDR sdr_uart1
-#endif /* CONFIG_440GX */
+#endif
+
+#if defined(CONFIG_SERIAL_MULTI)
+#define UART_BASE dev_base
+#else
+#define UART_BASE ACTING_UART0_BASE
#endif
#if defined(CONFIG_405EP) && defined(CFG_EXT_SERIAL_CLOCK)
@@ -419,7 +434,7 @@ static void serial_divs (int baudrate, unsigned long *pudiv,
*pbdiv = div/udiv;
}
-#endif /* defined(CONFIG_440) && !defined(CFG_EXT_SERIAL_CLK */
+#endif /* defined(CONFIG_440) && !defined(CFG_EXT_SERIAL_CLK) */
/*
* Minimal serial functions needed to use one of the SMC ports
@@ -441,23 +456,9 @@ int serial_init(void)
unsigned long tmp;
#endif
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || \
- defined(CONFIG_440SPE)
-#if defined(CONFIG_SERIAL_MULTI)
- if (UART0_BASE == dev_base) {
- mfsdr(UART0_SDR,reg);
- reg &= ~CR0_MASK;
- } else {
- mfsdr(UART1_SDR,reg);
- reg &= ~CR0_MASK;
- }
-#else
- mfsdr(UART0_SDR,reg);
+ MFREG(UART0_SDR, reg);
reg &= ~CR0_MASK;
-#endif
-#else
- reg = mfdcr(cntrl0) & ~CR0_MASK;
-#endif /* CONFIG_440GX */
+
#ifdef CFG_EXT_SERIAL_CLOCK
reg |= CR0_EXTCLK_ENA;
udiv = 1;
@@ -471,47 +472,34 @@ int serial_init(void)
serial_divs (gd->baudrate, &udiv, &bdiv);
#endif
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || \
- defined(CONFIG_440GR) || defined(CONFIG_440SP) || \
- defined(CONFIG_440SPE)
- reg |= udiv << CR0_UDIV_POS; /* set the UART divisor */
-#if defined(CONFIG_SERIAL_MULTI)
- if (UART0_BASE == dev_base) {
- mtsdr (UART0_SDR,reg);
- } else {
- mtsdr (UART1_SDR,reg);
- }
-#else
- mtsdr (UART0_SDR,reg);
+ reg |= (udiv - UDIV_SUBTRACT) << CR0_UDIV_POS; /* set the UART divisor */
+
+ /*
+ * Configure input clock to baudrate generator for all
+ * available serial ports here
+ */
+ MTREG(UART0_SDR, reg);
+#if defined(UART1_SDR)
+ MTREG(UART1_SDR, reg);
#endif
-#else
- reg |= (udiv - 1) << CR0_UDIV_POS; /* set the UART divisor */
- mtdcr (cntrl0, reg);
+#if defined(UART2_SDR)
+ MTREG(UART2_SDR, reg);
#endif
-
-#if defined(CONFIG_SERIAL_MULTI)
- out8 (dev_base + UART_LCR, 0x80); /* set DLAB bit */
- out8 (dev_base + UART_DLL, bdiv); /* set baudrate divisor */
- out8 (dev_base + UART_DLM, bdiv >> 8);/* set baudrate divisor */
- out8 (dev_base + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */
- out8 (dev_base + UART_FCR, 0x00); /* disable FIFO */
- out8 (dev_base + UART_MCR, 0x00); /* no modem control DTR RTS */
- val = in8 (dev_base + UART_LSR); /* clear line status */
- val = in8 (dev_base + UART_RBR); /* read receive buffer */
- out8 (dev_base + UART_SCR, 0x00); /* set scratchpad */
- out8 (dev_base + UART_IER, 0x00); /* set interrupt enable reg */
-#else
- out8 (ACTING_UART0_BASE + UART_LCR, 0x80); /* set DLAB bit */
- out8 (ACTING_UART0_BASE + UART_DLL, bdiv); /* set baudrate divisor */
- out8 (ACTING_UART0_BASE + UART_DLM, bdiv >> 8);/* set baudrate divisor */
- out8 (ACTING_UART0_BASE + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */
- out8 (ACTING_UART0_BASE + UART_FCR, 0x00); /* disable FIFO */
- out8 (ACTING_UART0_BASE + UART_MCR, 0x00); /* no modem control DTR RTS */
- val = in8 (ACTING_UART0_BASE + UART_LSR); /* clear line status */
- val = in8 (ACTING_UART0_BASE + UART_RBR); /* read receive buffer */
- out8 (ACTING_UART0_BASE + UART_SCR, 0x00); /* set scratchpad */
- out8 (ACTING_UART0_BASE + UART_IER, 0x00); /* set interrupt enable reg */
+#if defined(UART3_SDR)
+ MTREG(UART3_SDR, reg);
#endif
+
+ out8(UART_BASE + UART_LCR, 0x80); /* set DLAB bit */
+ out8(UART_BASE + UART_DLL, bdiv); /* set baudrate divisor */
+ out8(UART_BASE + UART_DLM, bdiv >> 8); /* set baudrate divisor */
+ out8(UART_BASE + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */
+ out8(UART_BASE + UART_FCR, 0x00); /* disable FIFO */
+ out8(UART_BASE + UART_MCR, 0x00); /* no modem control DTR RTS */
+ val = in8(UART_BASE + UART_LSR); /* clear line status */
+ val = in8(UART_BASE + UART_RBR); /* read receive buffer */
+ out8(UART_BASE + UART_SCR, 0x00); /* set scratchpad */
+ out8(UART_BASE + UART_IER, 0x00); /* set interrupt enable reg */
+
return (0);
}
@@ -564,29 +552,17 @@ int serial_init (void)
tmp = gd->baudrate * udiv * 16;
bdiv = (clk + tmp / 2) / tmp;
-#if defined(CONFIG_SERIAL_MULTI)
- out8 (dev_base + UART_LCR, 0x80); /* set DLAB bit */
- out8 (dev_base + UART_DLL, bdiv); /* set baudrate divisor */
- out8 (dev_base + UART_DLM, bdiv >> 8);/* set baudrate divisor */
- out8 (dev_base + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */
- out8 (dev_base + UART_FCR, 0x00); /* disable FIFO */
- out8 (dev_base + UART_MCR, 0x00); /* no modem control DTR RTS */
- val = in8 (dev_base + UART_LSR); /* clear line status */
- val = in8 (dev_base + UART_RBR); /* read receive buffer */
- out8 (dev_base + UART_SCR, 0x00); /* set scratchpad */
- out8 (dev_base + UART_IER, 0x00); /* set interrupt enable reg */
-#else
- out8 (ACTING_UART0_BASE + UART_LCR, 0x80); /* set DLAB bit */
- out8 (ACTING_UART0_BASE + UART_DLL, bdiv); /* set baudrate divisor */
- out8 (ACTING_UART0_BASE + UART_DLM, bdiv >> 8);/* set baudrate divisor */
- out8 (ACTING_UART0_BASE + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */
- out8 (ACTING_UART0_BASE + UART_FCR, 0x00); /* disable FIFO */
- out8 (ACTING_UART0_BASE + UART_MCR, 0x00); /* no modem control DTR RTS */
- val = in8 (ACTING_UART0_BASE + UART_LSR); /* clear line status */
- val = in8 (ACTING_UART0_BASE + UART_RBR); /* read receive buffer */
- out8 (ACTING_UART0_BASE + UART_SCR, 0x00); /* set scratchpad */
- out8 (ACTING_UART0_BASE + UART_IER, 0x00); /* set interrupt enable reg */
-#endif
+ out8(UART_BASE + UART_LCR, 0x80); /* set DLAB bit */
+ out8(UART_BASE + UART_DLL, bdiv); /* set baudrate divisor */
+ out8(UART_BASE + UART_DLM, bdiv >> 8); /* set baudrate divisor */
+ out8(UART_BASE + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */
+ out8(UART_BASE + UART_FCR, 0x00); /* disable FIFO */
+ out8(UART_BASE + UART_MCR, 0x00); /* no modem control DTR RTS */
+ val = in8(UART_BASE + UART_LSR); /* clear line status */
+ val = in8(UART_BASE + UART_RBR); /* read receive buffer */
+ out8(UART_BASE + UART_SCR, 0x00); /* set scratchpad */
+ out8(UART_BASE + UART_IER, 0x00); /* set interrupt enable reg */
+
return (0);
}
@@ -598,55 +574,10 @@ void serial_setbrg_dev (unsigned long dev_base)
void serial_setbrg (void)
#endif
{
- unsigned long tmp;
- unsigned long clk;
- unsigned long udiv;
- unsigned short bdiv;
-
-#ifdef CFG_EXT_SERIAL_CLOCK
- clk = CFG_EXT_SERIAL_CLOCK;
-#else
- clk = gd->cpu_clk;
-#endif
-
-#ifdef CONFIG_405EP
- udiv = ((mfdcr (cpc0_ucr) & UCR0_MASK) >> UCR0_UDIV_POS);
-#else
- udiv = ((mfdcr (cntrl0) & 0x3e) >> 1) + 1;
-#endif /* CONFIG_405EP */
-
-#if !defined(CFG_EXT_SERIAL_CLOCK) && \
- ( defined(CONFIG_440GX) || defined(CONFIG_440EP) || \
- defined(CONFIG_440GR) || defined(CONFIG_440SP) || \
- defined(CONFIG_440SPE) )
- serial_divs (gd->baudrate, &udiv, &bdiv);
- tmp = udiv << CR0_UDIV_POS; /* set the UART divisor */
-#if defined(CONFIG_SERIAL_MULTI)
- if (UART0_BASE == dev_base) {
- mtsdr (UART0_SDR, tmp);
- } else {
- mtsdr (UART1_SDR, tmp);
- }
-#else
- mtsdr (UART0_SDR, tmp);
-#endif
-
-#else
-
- tmp = gd->baudrate * udiv * 16;
- bdiv = (clk + tmp / 2) / tmp;
-#endif /* !defined(CFG_EXT_SERIAL_CLOCK) && (...) */
-
#if defined(CONFIG_SERIAL_MULTI)
- out8 (dev_base + UART_LCR, 0x80); /* set DLAB bit */
- out8 (dev_base + UART_DLL, bdiv); /* set baudrate divisor */
- out8 (dev_base + UART_DLM, bdiv >> 8);/* set baudrate divisor */
- out8 (dev_base + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */
+ serial_init_dev(dev_base);
#else
- out8 (ACTING_UART0_BASE + UART_LCR, 0x80); /* set DLAB bit */
- out8 (ACTING_UART0_BASE + UART_DLL, bdiv); /* set baudrate divisor */
- out8 (ACTING_UART0_BASE + UART_DLM, bdiv >> 8);/* set baudrate divisor */
- out8 (ACTING_UART0_BASE + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */
+ serial_init();
#endif
}
@@ -667,19 +598,11 @@ void serial_putc (const char c)
/* check THRE bit, wait for transmiter available */
for (i = 1; i < 3500; i++) {
-#if defined(CONFIG_SERIAL_MULTI)
- if ((in8 (dev_base + UART_LSR) & 0x20) == 0x20)
-#else
- if ((in8 (ACTING_UART0_BASE + UART_LSR) & 0x20) == 0x20)
-#endif
+ if ((in8 (UART_BASE + UART_LSR) & 0x20) == 0x20)
break;
udelay (100);
}
-#if defined(CONFIG_SERIAL_MULTI)
- out8 (dev_base + UART_THR, c); /* put character out */
-#else
- out8 (ACTING_UART0_BASE + UART_THR, c); /* put character out */
-#endif
+ out8 (UART_BASE + UART_THR, c); /* put character out */
}
#if defined(CONFIG_SERIAL_MULTI)
@@ -709,11 +632,7 @@ int serial_getc (void)
#if defined(CONFIG_HW_WATCHDOG)
WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */
#endif /* CONFIG_HW_WATCHDOG */
-#if defined(CONFIG_SERIAL_MULTI)
- status = in8 (dev_base + UART_LSR);
-#else
- status = in8 (ACTING_UART0_BASE + UART_LSR);
-#endif
+ status = in8 (UART_BASE + UART_LSR);
if ((status & asyncLSRDataReady1) != 0x0) {
break;
}
@@ -721,22 +640,14 @@ int serial_getc (void)
asyncLSROverrunError1 |
asyncLSRParityError1 |
asyncLSRBreakInterrupt1 )) != 0) {
-#if defined(CONFIG_SERIAL_MULTI)
- out8 (dev_base + UART_LSR,
-#else
- out8 (ACTING_UART0_BASE + UART_LSR,
-#endif
+ out8 (UART_BASE + UART_LSR,
asyncLSRFramingError1 |
asyncLSROverrunError1 |
asyncLSRParityError1 |
asyncLSRBreakInterrupt1);
}
}
-#if defined(CONFIG_SERIAL_MULTI)
- return (0x000000ff & (int) in8 (dev_base));
-#else
- return (0x000000ff & (int) in8 (ACTING_UART0_BASE));
-#endif
+ return (0x000000ff & (int) in8 (UART_BASE));
}
#if defined(CONFIG_SERIAL_MULTI)
@@ -747,11 +658,7 @@ int serial_tstc (void)
{
unsigned char status;
-#if defined(CONFIG_SERIAL_MULTI)
- status = in8 (dev_base + UART_LSR);
-#else
- status = in8 (ACTING_UART0_BASE + UART_LSR);
-#endif
+ status = in8 (UART_BASE + UART_LSR);
if ((status & asyncLSRDataReady1) != 0x0) {
return (1);
}
@@ -759,11 +666,7 @@ int serial_tstc (void)
asyncLSROverrunError1 |
asyncLSRParityError1 |
asyncLSRBreakInterrupt1 )) != 0) {
-#if defined(CONFIG_SERIAL_MULTI)
- out8 (dev_base + UART_LSR,
-#else
- out8 (ACTING_UART0_BASE + UART_LSR,
-#endif
+ out8 (UART_BASE + UART_LSR,
asyncLSRFramingError1 |
asyncLSROverrunError1 |
asyncLSRParityError1 |
diff --git a/cpu/ppc4xx/speed.c b/cpu/ppc4xx/speed.c
index e552c03..2d16a83 100644
--- a/cpu/ppc4xx/speed.c
+++ b/cpu/ppc4xx/speed.c
@@ -199,7 +199,8 @@ ulong get_PCI_freq (void)
#elif defined(CONFIG_440)
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
void get_sys_info (sys_info_t *sysInfo)
{
unsigned long temp;
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
index 60ed2d5..5a1ab38 100644
--- a/cpu/ppc4xx/start.S
+++ b/cpu/ppc4xx/start.S
@@ -117,12 +117,16 @@
.extern ext_bus_cntlr_init
.extern sdram_init
+#ifdef CONFIG_NAND_U_BOOT
+ .extern reconfig_tlb0
+#endif
/*
* Set up GOT: Global Offset Table
*
* Use r14 to access the GOT
*/
+#if !defined(CONFIG_NAND_SPL)
START_GOT
GOT_ENTRY(_GOT2_TABLE_)
GOT_ENTRY(_FIXUP_TABLE_)
@@ -136,6 +140,18 @@
GOT_ENTRY(_end)
GOT_ENTRY(__bss_start)
END_GOT
+#endif /* CONFIG_NAND_SPL */
+
+#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+ /*
+ * NAND U-Boot image is started from offset 0
+ */
+ .text
+ bl reconfig_tlb0
+ GET_GOT
+ bl cpu_init_f /* run low-level CPU init code (from Flash) */
+ bl board_init_f
+#endif
/*
* 440 Startup -- on reset only the top 4k of the effective
@@ -150,11 +166,21 @@
*/
#if defined(CONFIG_440)
+#if !defined(CONFIG_NAND_SPL)
.section .bootpg,"ax"
+#endif
.globl _start_440
/**************************************************************************/
_start_440:
+ /*--------------------------------------------------------------------+
+ | 440EPX BUP Change - Hardware team request
+ +--------------------------------------------------------------------*/
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+ sync
+ nop
+ nop
+#endif
/*----------------------------------------------------------------+
| Core bug fix. Clear the esr
+-----------------------------------------------------------------*/
@@ -171,15 +197,19 @@ _start_440:
mtspr srr1,r0
mtspr csrr0,r0
mtspr csrr1,r0
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE) /* NOTE: 440GX adds machine check status regs */
+ /* NOTE: 440GX adds machine check status regs */
+#if defined(CONFIG_440) && !defined(CONFIG_440GP)
mtspr mcsrr0,r0
mtspr mcsrr1,r0
- mfspr r1, mcsr
+ mfspr r1,mcsr
mtspr mcsr,r1
#endif
/*----------------------------------------------------------------*/
/* Initialize debug */
/*----------------------------------------------------------------*/
+ mfspr r1,dbcr0
+ andis. r1, r1, 0x8000 /* test DBCR0[EDM] bit */
+ bne skip_debug_init /* if set, don't clear debug register */
mtspr dbcr0,r0
mtspr dbcr1,r0
mtspr dbcr2,r0
@@ -193,6 +223,7 @@ _start_440:
mfspr r1,dbsr
mtspr dbsr,r1 /* Clear all valid bits */
+skip_debug_init:
/*----------------------------------------------------------------*/
/* CCR0 init */
@@ -352,7 +383,53 @@ rsttlb: tlbwe r0,r1,0x0000 /* Invalidate all entries (V=0)*/
/*----------------------------------------------------------------*/
/* Continue from 'normal' start */
/*----------------------------------------------------------------*/
-2: bl 3f
+2:
+
+#if defined(CONFIG_NAND_SPL)
+ /*
+ * Enable internal SRAM
+ */
+ lis r2,0x7fff
+ ori r2,r2,0xffff
+ mfdcr r1,isram0_dpc
+ and r1,r1,r2 /* Disable parity check */
+ mtdcr isram0_dpc,r1
+ mfdcr r1,isram0_pmeg
+ and r1,r1,r2 /* Disable pwr mgmt */
+ mtdcr isram0_pmeg,r1
+
+ /*
+ * Copy SPL from cache into internal SRAM
+ */
+ li r4,(CFG_NAND_BOOT_SPL_SIZE >> 2) - 1
+ mtctr r4
+ lis r2,CFG_NAND_BOOT_SPL_SRC@h
+ ori r2,r2,CFG_NAND_BOOT_SPL_SRC@l
+ lis r3,CFG_NAND_BOOT_SPL_DST@h
+ ori r3,r3,CFG_NAND_BOOT_SPL_DST@l
+spl_loop:
+ lwzu r4,4(r2)
+ stwu r4,4(r3)
+ bdnz spl_loop
+
+ /*
+ * Jump to code in RAM
+ */
+ bl 00f
+00: mflr r10
+ lis r3,(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)@h
+ ori r3,r3,(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)@l
+ sub r10,r10,r3
+ addi r10,r10,28
+ mtlr r10
+ blr
+
+start_ram:
+ sync
+ isync
+#endif
+
+ bl 3f
b _start
3: li r0,0
@@ -366,6 +443,7 @@ rsttlb: tlbwe r0,r1,0x0000 /* Invalidate all entries (V=0)*/
* r3 - 1st arg to board_init(): IMMP pointer
* r4 - 2nd arg to board_init(): boot flag
*/
+#ifndef CONFIG_NAND_SPL
.text
.long 0x27051956 /* U-Boot Magic Number */
.globl version_string
@@ -379,6 +457,7 @@ version_string:
* location (0x100) is where the CriticalInput Execption should be.
*/
. = EXC_OFF_SYS_RESET
+#endif
.globl _start
_start:
@@ -417,7 +496,8 @@ _start:
/* Setup the internal SRAM */
/*----------------------------------------------------------------*/
li r0,0
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+
+#ifdef CFG_INIT_RAM_DCACHE
/* Clear Dcache to use as RAM */
addis r3,r0,CFG_INIT_RAM_ADDR@h
ori r3,r3,CFG_INIT_RAM_ADDR@l
@@ -433,19 +513,22 @@ _start:
dcbz r0,r3
addi r3,r3,32
bdnz ..d_ag
-#else
-#if defined (CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#endif /* CFG_INIT_RAM_DCACHE */
+
+ /* 440EP & 440GR are only 440er PPC's without internal SRAM */
+#if !defined(CONFIG_440EP) && !defined(CONFIG_440GR)
+ /* not all PPC's have internal SRAM usable as L2-cache */
+#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
mtdcr l2_cache_cfg,r0 /* Ensure L2 Cache is off */
#endif
- mtdcr isram0_sb1cr,r0 /* Disable bank 1 */
- li r2,0x7fff
+ lis r2,0x7fff
ori r2,r2,0xffff
mfdcr r1,isram0_dpc
and r1,r1,r2 /* Disable parity check */
mtdcr isram0_dpc,r1
mfdcr r1,isram0_pmeg
- andis. r1,r1,r2 /* Disable pwr mgmt */
+ and r1,r1,r2 /* Disable pwr mgmt */
mtdcr isram0_pmeg,r1
lis r1,0x8000 /* BAS = 8000_0000 */
@@ -474,11 +557,12 @@ _start:
lis r1, 0x0003
ori r1,r1, 0x0984 /* fourth 64k */
mtdcr isram0_sb3cr,r1
-#else
+#elif defined(CONFIG_440GP)
ori r1,r1,0x0380 /* 8k rw */
mtdcr isram0_sb0cr,r1
+ mtdcr isram0_sb1cr,r0 /* Disable bank 1 */
#endif
-#endif
+#endif /* #if !defined(CONFIG_440EP) && !defined(CONFIG_440GR) */
/*----------------------------------------------------------------*/
/* Setup the stack in internal SRAM */
@@ -495,10 +579,14 @@ _start:
stwu r1,-8(r1) /* Save back chain and move SP */
stw r0,+12(r1) /* Save return addr (underflow vect) */
+#ifdef CONFIG_NAND_SPL
+ bl nand_boot /* will not return */
+#else
GET_GOT
bl cpu_init_f /* run low-level CPU init code (from Flash) */
bl board_init_f
+#endif
#endif /* CONFIG_440 */
@@ -808,6 +896,7 @@ _start:
/*----------------------------------------------------------------------- */
+#ifndef CONFIG_NAND_SPL
/*****************************************************************************/
.globl _start_of_vectors
_start_of_vectors:
@@ -1013,6 +1102,7 @@ crit_return:
lwz r1,GPR1(r1)
SYNC
rfci
+#endif /* CONFIG_NAND_SPL */
/* Cache functions.
*/
@@ -1254,6 +1344,7 @@ ppcSync:
/*------------------------------------------------------------------------------*/
+#ifndef CONFIG_NAND_SPL
/*
* void relocate_code (addr_sp, gd, addr_moni)
*
@@ -1267,7 +1358,9 @@ ppcSync:
*/
.globl relocate_code
relocate_code:
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SPE)
/*
* On some 440er platforms the cache is enabled in the first TLB (Boot-CS)
* to speed up the boot process. Now this cache needs to be disabled.
@@ -1482,22 +1575,22 @@ trap_init:
cmplw 0, r7, r8
blt 4b
-#if !defined(CONFIG_440GX) && !defined(CONFIG_440SPE)
+#if !defined(CONFIG_440)
addi r7,r0,0x1000 /* set ME bit (Machine Exceptions) */
oris r7,r7,0x0002 /* set CE bit (Critical Exceptions) */
mtmsr r7 /* change MSR */
#else
- bl __440gx_msr_set
- b __440gx_msr_continue
+ bl __440_msr_set
+ b __440_msr_continue
-__440gx_msr_set:
+__440_msr_set:
addi r7,r0,0x1000 /* set ME bit (Machine Exceptions) */
oris r7,r7,0x0002 /* set CE bit (Critical Exceptions) */
mtspr srr1,r7
mflr r7
mtspr srr0,r7
rfi
-__440gx_msr_continue:
+__440_msr_continue:
#endif
mtlr r4 /* restore link register */
@@ -1516,6 +1609,7 @@ trap_reloc:
stw r0, 4(r7)
blr
+#endif /* CONFIG_NAND_SPL */
/**************************************************************************/
diff --git a/cpu/ppc4xx/usb_ohci.c b/cpu/ppc4xx/usb_ohci.c
index bb57658..ab852c5 100644
--- a/cpu/ppc4xx/usb_ohci.c
+++ b/cpu/ppc4xx/usb_ohci.c
@@ -76,7 +76,7 @@
#define m16_swap(x) swap_16(x)
#define m32_swap(x) swap_32(x)
-#ifdef CONFIG_440EP
+#if defined(CONFIG_440EP) || defined(CONFIG_440EPX)
#define ohci_cpu_to_le16(x) (x)
#define ohci_cpu_to_le32(x) (x)
#else
@@ -1599,7 +1599,11 @@ int usb_lowlevel_init(void)
gohci.disabled = 1;
gohci.sleeping = 0;
gohci.irq = -1;
- gohci.regs = (struct ohci_regs *)(CFG_PERIPHERAL_BASE | 0x1000);
+#if defined(CONFIG_440EP)
+ gohci.regs = (struct ohci_regs *)(CFG_PERIPHERAL_BASE | 0x1000);
+#elif defined(CONFIG_440EPX)
+ gohci.regs = (struct ohci_regs *)(CFG_USB_HOST);
+#endif
gohci.flags = 0;
gohci.slot_name = "ppc440";
diff --git a/cpu/ppc4xx/usbdev.c b/cpu/ppc4xx/usbdev.c
index 8262c54..6140d2a 100644
--- a/cpu/ppc4xx/usbdev.c
+++ b/cpu/ppc4xx/usbdev.c
@@ -3,7 +3,7 @@
#include <common.h>
#include <asm/processor.h>
-#ifdef CONFIG_440EP
+#if (defined(CONFIG_440EP) || defined(CONFIG_440EPX)) && (CONFIG_COMMANDS & CFG_CMD_USB)
#include <usb.h>
#include "usbdev.h"
@@ -186,6 +186,21 @@ int usbInt(void)
return 0;
}
+#if defined(CONFIG_440EPX)
+void usb_dev_init()
+{
+ printf("USB 2.0 Device init\n");
+
+ /*usb dev init */
+ *(unsigned char *)USB2D0_POWER_8 = 0xa1; /* 2.0 */
+
+ /*enable interrupts */
+ *(unsigned char *)USB2D0_INTRUSBE_8 = 0x0f;
+
+ irq_install_handler(VECNUM_HSB2D, (interrupt_handler_t *) usbInt,
+ NULL);
+}
+#else
void usb_dev_init()
{
#ifdef USB_2_0_DEVICE
@@ -210,5 +225,6 @@ void usb_dev_init()
irq_install_handler(VECNUM_USBDEV, (interrupt_handler_t *) usbInt,
NULL);
}
+#endif
-#endif /*CONFIG_440EP */
+#endif /* CONFIG_440EP || CONFIG_440EPX */
diff --git a/cpu/ppc4xx/vecnum.h b/cpu/ppc4xx/vecnum.h
index 93cef02..685d48b 100644
--- a/cpu/ppc4xx/vecnum.h
+++ b/cpu/ppc4xx/vecnum.h
@@ -31,7 +31,94 @@
#ifndef _VECNUMS_H_
#define _VECNUMS_H_
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+
+/* UIC 0 */
+#define VECNUM_U0 0 /* UART 0 */
+#define VECNUM_U1 1 /* UART 1 */
+#define VECNUM_IIC0 2 /* IIC */
+#define VECNUM_KRD 3 /* Kasumi Ready for data */
+#define VECNUM_KDA 4 /* Kasumi Data Available */
+#define VECNUM_PCRW 5 /* PCI command register write */
+#define VECNUM_PPM 6 /* PCI power management */
+#define VECNUM_IIC1 7 /* IIC */
+#define VECNUM_SPI 8 /* SPI */
+#define VECNUM_EPCISER 9 /* External PCI SERR */
+#define VECNUM_MTE 10 /* MAL TXEOB */
+#define VECNUM_MRE 11 /* MAL RXEOB */
+#define VECNUM_D0 12 /* DMA channel 0 */
+#define VECNUM_D1 13 /* DMA channel 1 */
+#define VECNUM_D2 14 /* DMA channel 2 */
+#define VECNUM_D3 15 /* DMA channel 3 */
+#define VECNUM_UD0 16 /* UDMA irq 0 */
+#define VECNUM_UD1 17 /* UDMA irq 1 */
+#define VECNUM_UD2 18 /* UDMA irq 2 */
+#define VECNUM_UD3 19 /* UDMA irq 3 */
+#define VECNUM_HSB2D 20 /* USB2.0 Device */
+#define VECNUM_USBDEV 20 /* USB 1.1/USB 2.0 Device */
+#define VECNUM_OHCI1 21 /* USB2.0 Host OHCI irq 1 */
+#define VECNUM_OHCI2 22 /* USB2.0 Host OHCI irq 2 */
+#define VECNUM_EIP94 23 /* Security EIP94 */
+#define VECNUM_ETH0 24 /* Emac 0 */
+#define VECNUM_ETH1 25 /* Emac 1 */
+#define VECNUM_EHCI 26 /* USB2.0 Host EHCI */
+#define VECNUM_EIR4 27 /* External interrupt 4 */
+#define VECNUM_UIC2NC 28 /* UIC2 non-critical interrupt */
+#define VECNUM_UIC2C 29 /* UIC2 critical interrupt */
+#define VECNUM_UIC1NC 30 /* UIC1 non-critical interrupt */
+#define VECNUM_UIC1C 31 /* UIC1 critical interrupt */
+
+/* UIC 1 */
+#define VECNUM_MS (32 + 0) /* MAL SERR */
+#define VECNUM_MTDE (32 + 1) /* MAL TXDE */
+#define VECNUM_MRDE (32 + 2) /* MAL RXDE */
+#define VECNUM_U2 (32 + 3) /* UART 2 */
+#define VECNUM_U3 (32 + 4) /* UART 3 */
+#define VECNUM_EBCO (32 + 5) /* EBCO interrupt status */
+#define VECNUM_NDFC (32 + 6) /* NDFC */
+#define VECNUM_KSLE (32 + 7) /* KASUMI slave error */
+#define VECNUM_CT5 (32 + 8) /* GPT compare timer 5 */
+#define VECNUM_CT6 (32 + 9) /* GPT compare timer 6 */
+#define VECNUM_PLB34I0 (32 + 10) /* PLB3X4X MIRQ0 */
+#define VECNUM_PLB34I1 (32 + 11) /* PLB3X4X MIRQ1 */
+#define VECNUM_PLB34I2 (32 + 12) /* PLB3X4X MIRQ2 */
+#define VECNUM_PLB34I3 (32 + 13) /* PLB3X4X MIRQ3 */
+#define VECNUM_PLB34I4 (32 + 14) /* PLB3X4X MIRQ4 */
+#define VECNUM_PLB34I5 (32 + 15) /* PLB3X4X MIRQ5 */
+#define VECNUM_CT0 (32 + 16) /* GPT compare timer 0 */
+#define VECNUM_CT1 (32 + 17) /* GPT compare timer 1 */
+#define VECNUM_EIR7 (32 + 18) /* External interrupt 7 */
+#define VECNUM_EIR8 (32 + 19) /* External interrupt 8 */
+#define VECNUM_EIR9 (32 + 20) /* External interrupt 9 */
+#define VECNUM_CT2 (32 + 21) /* GPT compare timer 2 */
+#define VECNUM_CT3 (32 + 22) /* GPT compare timer 3 */
+#define VECNUM_CT4 (32 + 23) /* GPT compare timer 4 */
+#define VECNUM_SRE (32 + 24) /* Serial ROM error */
+#define VECNUM_GPTDC (32 + 25) /* GPT decrementer pulse */
+#define VECNUM_RSVD0 (32 + 26) /* Reserved */
+#define VECNUM_EPCIPER (32 + 27) /* External PCI PERR */
+#define VECNUM_EIR0 (32 + 28) /* External interrupt 0 */
+#define VECNUM_EWU0 (32 + 29) /* Ethernet 0 wakeup */
+#define VECNUM_EIR1 (32 + 30) /* External interrupt 1 */
+#define VECNUM_EWU1 (32 + 31) /* Ethernet 1 wakeup */
+
+#define VECNUM_TXDE VECNUM_MTDE
+#define VECNUM_RXDE VECNUM_MRDE
+
+/* UIC 2 */
+#define VECNUM_EIR5 (62 + 0) /* External interrupt 5 */
+#define VECNUM_EIR6 (62 + 1) /* External interrupt 6 */
+#define VECNUM_OPB (62 + 2) /* OPB to PLB bridge int stat */
+#define VECNUM_EIR2 (62 + 3) /* External interrupt 2 */
+#define VECNUM_EIR3 (62 + 4) /* External interrupt 3 */
+#define VECNUM_DDR2 (62 + 5) /* DDR2 sdram */
+#define VECNUM_MCTX0 (62 + 6) /* MAl intp coalescence TX0 */
+#define VECNUM_MCTX1 (62 + 7) /* MAl intp coalescence TX1 */
+#define VECNUM_MCTR0 (62 + 8) /* MAl intp coalescence TR0 */
+#define VECNUM_MCTR1 (62 + 9) /* MAl intp coalescence TR1 */
+
+#elif defined(CONFIG_440SPE)
+
/* UIC 0 */
#define VECNUM_U0 0 /* UART0 */
#define VECNUM_U1 1 /* UART1 */
diff --git a/cpu/pxa/Makefile b/cpu/pxa/Makefile
index 1af53d6..a6f6b59 100644
--- a/cpu/pxa/Makefile
+++ b/cpu/pxa/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,21 +23,25 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o
-OBJS = serial.o interrupts.o cpu.o i2c.o pxafb.o mmc.o
+COBJS = serial.o interrupts.o cpu.o i2c.o pxafb.o mmc.o
-all: .depend $(START) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/s3c44b0/Makefile b/cpu/s3c44b0/Makefile
index d43c73e..62cb514 100644
--- a/cpu/s3c44b0/Makefile
+++ b/cpu/s3c44b0/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,21 +23,25 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o
-OBJS = serial.o interrupts.o cpu.o
+COBJS = serial.o interrupts.o cpu.o
-all: .depend $(START) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/cpu/sa1100/Makefile b/cpu/sa1100/Makefile
index 8c950da..62cb514 100644
--- a/cpu/sa1100/Makefile
+++ b/cpu/sa1100/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,21 +23,25 @@
include $(TOPDIR)/config.mk
-LIB = lib$(CPU).a
+LIB = $(obj)lib$(CPU).a
START = start.o
-OBJS = serial.o interrupts.o cpu.o
+COBJS = serial.o interrupts.o cpu.o
-all: .depend $(START) $(LIB)
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/disk/Makefile b/disk/Makefile
index 39677f1..3bdb018 100644
--- a/disk/Makefile
+++ b/disk/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -25,20 +25,23 @@ include $(TOPDIR)/config.mk
#CFLAGS += -DET_DEBUG -DDEBUG
-LIB = libdisk.a
+LIB = $(obj)libdisk.a
-OBJS = part.o part_mac.o part_dos.o part_iso.o part_amiga.o
+COBJS = part.o part_mac.o part_dos.o part_iso.o part_amiga.o
+
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
all: $(LIB)
-$(LIB): $(START) $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/doc/README.nand-boot-ppc440 b/doc/README.nand-boot-ppc440
new file mode 100644
index 0000000..a1c1d8c
--- /dev/null
+++ b/doc/README.nand-boot-ppc440
@@ -0,0 +1,60 @@
+-----------------------------
+NAND boot on PPC440 platforms
+-----------------------------
+
+This document describes the U-Boot NAND boot feature as it
+is implemented for the AMCC Sequoia (PPC440EPx) board.
+
+The PPC440EP(x)/GR(x) cpu's can boot directly from NAND FLASH,
+completely without NOR FLASH. This can be done by using the NAND
+boot feature of the 440 NAND flash controller (NDFC).
+
+Here a short desciption of the different boot stages:
+
+a) IPL (Initial Program Loader, integrated inside CPU)
+------------------------------------------------------
+Will load first 4k from NAND (SPL) into cache and execute it from there.
+
+b) SPL (Secondary Program Loader)
+---------------------------------
+Will load special U-Boot version (NUB) from NAND and execute it. This SPL
+has to fit into 4kByte. It sets up the CPU and configures the SDRAM
+controller and the NAND controller so that the special U-Boot image can be
+loaded from NAND to SDRAM.
+This special image is build in the directory "nand_spl".
+
+c) NUB (NAND U-Boot)
+--------------------
+This NAND U-Boot (NUB) is a special U-Boot version which can be started
+from RAM. Therefore it mustn't (re-)configure the SDRAM controller.
+
+On 440EPx the SPL is copied to internal SRAM before the NAND controller
+is set up. While still running from cache, I experienced problems accessing
+the NAND controller.
+
+
+Example: Build and install NAND boot image for Sequoia (440EPx):
+
+a) Configure for sequoia with NAND boot support:
+# make sequoia_nand_config
+
+b) Build image(s)
+# make
+
+This will generate the SPL image in the "nand_spl" directory:
+nand_spl/u-boot-spl.bin
+Also another image is created spanning a whole NAND block (16kBytes):
+nand_spl/u-boot-spl-16k.bin
+The main NAND U-Boot image is generated in the toplevel directory:
+u-boot.bin
+A combined image of u-boot-spl-16k.bin and u-boot.bin is also created:
+u-boot-nand.bin
+
+This image should be programmed at offset 0 in the NAND flash:
+
+# tftp 100000 /tftpboot/sequoia/u-boot-nand.bin
+# nand erase 0 60000
+# nand write 100000 0 60000
+
+
+September 07 2006, Stefan Roese <sr@denx.de>
diff --git a/drivers/Makefile b/drivers/Makefile
index 9be95c7..d0acf8e 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -25,9 +25,9 @@ include $(TOPDIR)/config.mk
# CFLAGS += -DET_DEBUG -DDEBUG
-LIB = libdrivers.a
+LIB = $(obj)libdrivers.a
-OBJS = 3c589.o 5701rls.o ali512x.o \
+COBJS = 3c589.o 5701rls.o ali512x.o \
bcm570x.o bcm570x_autoneg.o cfb_console.o cfi_flash.o \
cs8900.o ct69000.o dataflash.o dc2114x.o dm9000x.o \
e1000.o eepro100.o \
@@ -52,16 +52,19 @@ OBJS = 3c589.o 5701rls.o ali512x.o \
pxa_pcmcia.o mpc8xx_pcmcia.o tqm8xx_pcmcia.o \
rpx_pcmcia.o
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
all: $(LIB)
-$(LIB): $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/drivers/dm9000x.c b/drivers/dm9000x.c
index 0e475d4..6877076 100644
--- a/drivers/dm9000x.c
+++ b/drivers/dm9000x.c
@@ -436,6 +436,9 @@ eth_rx(void)
u8 rxbyte, *rdptr = (u8 *) NetRxPackets[0];
u16 RxStatus, RxLen = 0;
u32 tmplen, i;
+#ifdef CONFIG_DM9000_USE_32BIT
+ u32 tmpdata;
+#endif
/* Check packet ready or not */
DM9000_ior(DM9000_MRCMDX); /* Dummy read */
diff --git a/drivers/nand/Makefile b/drivers/nand/Makefile
index 96f67df..d707658 100644
--- a/drivers/nand/Makefile
+++ b/drivers/nand/Makefile
@@ -1,16 +1,45 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
include $(TOPDIR)/config.mk
-LIB := libnand.a
+LIB := $(obj)libnand.a
+
+COBJS := nand.o nand_base.o nand_ids.o nand_ecc.o nand_bbt.o
+
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
-OBJS := nand.o nand_base.o nand_ids.o nand_ecc.o nand_bbt.o
all: $(LIB)
-$(LIB): $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/drivers/nand_legacy/Makefile b/drivers/nand_legacy/Makefile
index 7e2cf66..23df5b7 100644
--- a/drivers/nand_legacy/Makefile
+++ b/drivers/nand_legacy/Makefile
@@ -1,16 +1,45 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
include $(TOPDIR)/config.mk
-LIB := libnand_legacy.a
+LIB := $(obj)libnand_legacy.a
+
+COBJS := nand_legacy.o
+
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
-OBJS := nand_legacy.o
all: $(LIB)
-$(LIB): $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/drivers/ns9750_serial.c b/drivers/ns9750_serial.c
index 8dff367..02c0d39 100644
--- a/drivers/ns9750_serial.c
+++ b/drivers/ns9750_serial.c
@@ -35,6 +35,10 @@
DECLARE_GLOBAL_DATA_PTR;
+#if !defined(CONFIG_CONS_INDEX)
+#error "No console index specified."
+#endif
+
#define CONSOLE CONFIG_CONS_INDEX
static unsigned int calcBitrateRegister( void );
diff --git a/drivers/serial.c b/drivers/serial.c
index 228781b..8d1ae96 100644
--- a/drivers/serial.c
+++ b/drivers/serial.c
@@ -30,10 +30,20 @@
#include <ns87308.h>
#endif
+#if defined (CONFIG_SERIAL_MULTI)
+#include <serial.h>
+#endif
+
DECLARE_GLOBAL_DATA_PTR;
#if !defined(CONFIG_CONS_INDEX)
+#if defined (CONFIG_SERIAL_MULTI)
+/* with CONFIG_SERIAL_MULTI we might have no console
+ * on these devices
+ */
+#else
#error "No console index specified."
+#endif /* CONFIG_SERIAL_MULTI */
#elif (CONFIG_CONS_INDEX < 1) || (CONFIG_CONS_INDEX > 4)
#error "Invalid console index value."
#endif
@@ -75,7 +85,42 @@ static NS16550_t serial_ports[4] = {
};
#define PORT serial_ports[port-1]
+#if defined(CONFIG_CONS_INDEX)
#define CONSOLE (serial_ports[CONFIG_CONS_INDEX-1])
+#endif
+
+#if defined(CONFIG_SERIAL_MULTI)
+
+/* Multi serial device functions */
+#define DECLARE_ESERIAL_FUNCTIONS(port) \
+ int eserial##port##_init (void) {\
+ int clock_divisor; \
+ clock_divisor = calc_divisor(serial_ports[port-1]); \
+ NS16550_init(serial_ports[port-1], clock_divisor); \
+ return(0);}\
+ void eserial##port##_setbrg (void) {\
+ serial_setbrg_dev(port);}\
+ int eserial##port##_getc (void) {\
+ return serial_getc_dev(port);}\
+ int eserial##port##_tstc (void) {\
+ return serial_tstc_dev(port);}\
+ void eserial##port##_putc (const char c) {\
+ serial_putc_dev(port, c);}\
+ void eserial##port##_puts (const char *s) {\
+ serial_puts_dev(port, s);}
+
+/* Serial device descriptor */
+#define INIT_ESERIAL_STRUCTURE(port,name,bus) {\
+ name,\
+ bus,\
+ eserial##port##_init,\
+ eserial##port##_setbrg,\
+ eserial##port##_getc,\
+ eserial##port##_tstc,\
+ eserial##port##_putc,\
+ eserial##port##_puts, }
+
+#endif /* CONFIG_SERIAL_MULTI */
static int calc_divisor (NS16550_t port)
{
@@ -103,6 +148,7 @@ static int calc_divisor (NS16550_t port)
}
+#if !defined(CONFIG_SERIAL_MULTI)
int serial_init (void)
{
int clock_divisor;
@@ -130,6 +176,7 @@ int serial_init (void)
return (0);
}
+#endif
void
_serial_putc(const char c,const int port)
@@ -176,40 +223,104 @@ _serial_setbrg (const int port)
NS16550_reinit(PORT, clock_divisor);
}
+#if defined(CONFIG_SERIAL_MULTI)
+static inline void
+serial_putc_dev(unsigned int dev_index,const char c)
+{
+ _serial_putc(c,dev_index);
+}
+#else
void
serial_putc(const char c)
{
_serial_putc(c,CONFIG_CONS_INDEX);
}
+#endif
+#if defined(CONFIG_SERIAL_MULTI)
+static inline void
+serial_putc_raw_dev(unsigned int dev_index,const char c)
+{
+ _serial_putc_raw(c,dev_index);
+}
+#else
void
serial_putc_raw(const char c)
{
_serial_putc_raw(c,CONFIG_CONS_INDEX);
}
+#endif
+#if defined(CONFIG_SERIAL_MULTI)
+static inline void
+serial_puts_dev(unsigned int dev_index,const char *s)
+{
+ _serial_puts(s,dev_index);
+}
+#else
void
serial_puts(const char *s)
{
_serial_puts(s,CONFIG_CONS_INDEX);
}
+#endif
+#if defined(CONFIG_SERIAL_MULTI)
+static inline int
+serial_getc_dev(unsigned int dev_index)
+{
+ return _serial_getc(dev_index);
+}
+#else
int
serial_getc(void)
{
return _serial_getc(CONFIG_CONS_INDEX);
}
+#endif
+#if defined(CONFIG_SERIAL_MULTI)
+static inline int
+serial_tstc_dev(unsigned int dev_index)
+{
+ return _serial_tstc(dev_index);
+}
+#else
int
serial_tstc(void)
{
return _serial_tstc(CONFIG_CONS_INDEX);
}
+#endif
+#if defined(CONFIG_SERIAL_MULTI)
+static inline void
+serial_setbrg_dev(unsigned int dev_index)
+{
+ _serial_setbrg(dev_index);
+}
+#else
void
serial_setbrg(void)
{
_serial_setbrg(CONFIG_CONS_INDEX);
}
+#endif
+
+#if defined(CONFIG_SERIAL_MULTI)
+
+DECLARE_ESERIAL_FUNCTIONS(1);
+struct serial_device eserial1_device =
+ INIT_ESERIAL_STRUCTURE(1,"eserial0","EUART1");
+DECLARE_ESERIAL_FUNCTIONS(2);
+struct serial_device eserial2_device =
+ INIT_ESERIAL_STRUCTURE(2,"eserial1","EUART2");
+DECLARE_ESERIAL_FUNCTIONS(3);
+struct serial_device eserial3_device =
+ INIT_ESERIAL_STRUCTURE(3,"eserial2","EUART3");
+DECLARE_ESERIAL_FUNCTIONS(4);
+struct serial_device eserial4_device =
+ INIT_ESERIAL_STRUCTURE(4,"eserial3","EUART4");
+#endif /* CONFIG_SERIAL_MULTI */
#endif
diff --git a/drivers/sk98lin/Makefile b/drivers/sk98lin/Makefile
index 8ee0e21..ac21e02 100644
--- a/drivers/sk98lin/Makefile
+++ b/drivers/sk98lin/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2003
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -24,15 +24,19 @@
#
# Makefile for the SysKonnect SK-98xx device driver.
#
+
include $(TOPDIR)/config.mk
-LIB := libsk98lin.a
+LIB := $(obj)libsk98lin.a
+
+COBJS := skge.o skaddr.o skgehwt.o skgeinit.o skgepnmi.o skgesirq.o \
+ ski2c.o sklm80.o skqueue.o skrlmt.o sktimer.o skvpd.o \
+ skxmac2.o skcsum.o #skproc.o
-OBJS := skge.o skaddr.o skgehwt.o skgeinit.o skgepnmi.o skgesirq.o \
- ski2c.o sklm80.o skqueue.o skrlmt.o sktimer.o skvpd.o \
- skxmac2.o skcsum.o #skproc.o
+COBJS += uboot_skb.o uboot_drv.o
-OBJS += uboot_skb.o uboot_drv.o
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
# DBGDEF = \
# -DDEBUG
@@ -84,18 +88,20 @@ endif
EXTRA_CFLAGS += -I. -DSK_USE_CSUM $(DBGDEF)
CFLAGS += $(EXTRA_CFLAGS)
+HOST_CFLAGS += $(EXTRA_CFLAGS)
all: $(LIB)
-$(LIB): $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
+
diff --git a/dtt/Makefile b/dtt/Makefile
index 0a33478..486008a 100644
--- a/dtt/Makefile
+++ b/dtt/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2001
# Erik Theisen, Wave 7 Optics, etheisen@mindspring.com.
#
@@ -25,20 +28,23 @@ include $(TOPDIR)/config.mk
#CFLAGS += -DDEBUG
-LIB = libdtt.a
+LIB = $(obj)libdtt.a
+
+COBJS = lm75.o ds1621.o adm1021.o
-OBJS = lm75.o ds1621.o adm1021.o
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
all: $(LIB)
-$(LIB): $(START) $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/dtt/lm75.c b/dtt/lm75.c
index 59daa45..63f3b75 100644
--- a/dtt/lm75.c
+++ b/dtt/lm75.c
@@ -146,8 +146,13 @@ static int _dtt_init(int sensor)
/*
* Setup configuraton register
*/
+#ifdef CONFIG_DTT_AD7414
+ /* config = alert active low and disabled */
+ val = 0x60;
+#else
/* config = 6 sample integration, int mode, active low, and enable */
val = 0x18;
+#endif
if (dtt_write(sensor, DTT_CONFIG, val) != 0)
return 1;
diff --git a/examples/Makefile b/examples/Makefile
index a342d75..d7cd843 100644
--- a/examples/Makefile
+++ b/examples/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -94,6 +94,12 @@ SREC += mem_to_mem_idma2intr.srec
BIN += mem_to_mem_idma2intr.bin mem_to_mem_idma2intr
endif
+# Demo for 52xx IRQs
+ifeq ($(CPU),mpc5xxx)
+SREC += interrupt.srec
+BIN += interrupt.bin interrupt
+endif
+
# Utility for resetting i82559 EEPROM
ifeq ($(BOARD),oxc)
SREC += eepro100_eeprom.srec
@@ -104,9 +110,9 @@ ifeq ($(BIG_ENDIAN),y)
EX_LDFLAGS += -EB
endif
-OBJS = $(SREC:.srec=.o)
+COBJS := $(SREC:.srec=.o)
-LIB = libstubs.a
+LIB = $(obj)libstubs.a
LIBAOBJS=
ifeq ($(ARCH),ppc)
LIBAOBJS+= $(ARCH)_longjmp.o $(ARCH)_setjmp.o
@@ -115,34 +121,40 @@ ifeq ($(CPU),mpc8xx)
LIBAOBJS+= test_burst_lib.o
endif
LIBCOBJS= stubs.o
-LIBOBJS = $(LIBAOBJS) $(LIBCOBJS)
+
+LIBOBJS = $(addprefix $(obj),$(LIBAOBJS) $(LIBCOBJS))
+
+SRCS := $(COBJS:.o=.c) $(LIBCOBJS:.o=.c) $(if $(LIBAOBJS),$(LIBAOBJS:.o=.S))
+OBJS := $(addprefix $(obj),$(COBJS))
+BIN := $(addprefix $(obj),$(BIN))
+SREC := $(addprefix $(obj),$(SREC))
gcclibdir := $(shell dirname `$(CC) -print-libgcc-file-name`)
clibdir := $(shell dirname `$(CC) $(CFLAGS) -print-file-name=libc.a`)
CPPFLAGS += -I..
-all: .depend $(OBJS) $(LIB) $(SREC) $(BIN)
+all: $(obj).depend $(OBJS) $(LIB) $(SREC) $(BIN)
#########################################################################
-$(LIB): .depend $(LIBOBJS)
- $(AR) crv $@ $(LIBOBJS)
+$(LIB): $(obj).depend $(LIBOBJS)
+ $(AR) crv $@ $(LIBOBJS)
-%: %.o $(LIB)
- $(LD) -g $(EX_LDFLAGS) -Ttext $(LOAD_ADDR) \
- -o $@ -e $(<:.o=) $< $(LIB) \
- -L$(gcclibdir) -lgcc
-%.srec: %
- $(OBJCOPY) -O srec $< $@ 2>/dev/null
+$(obj)%: $(obj)%.o $(LIB)
+ $(LD) -g $(EX_LDFLAGS) -Ttext $(LOAD_ADDR) \
+ -o $@ -e $(notdir $(<:.o=)) $< $(LIB) \
+ -L$(gcclibdir) -lgcc
+$(obj)%.srec: $(obj)%
+ $(OBJCOPY) -O srec $< $@ 2>/dev/null
-%.bin: %
- $(OBJCOPY) -O binary $< $@ 2>/dev/null
+$(obj)%.bin: $(obj)%
+ $(OBJCOPY) -O binary $< $@ 2>/dev/null
#########################################################################
-.depend: Makefile $(OBJS:.o=.c) $(LIBCOBJS:.o=.c) $(LIBAOBJS:.o=.S)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) $(LIBCOBJS:.o=.c) $(LIBAOBJS:.o=.S) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/examples/interrupt.c b/examples/interrupt.c
new file mode 100644
index 0000000..f3061d1
--- /dev/null
+++ b/examples/interrupt.c
@@ -0,0 +1,81 @@
+/*
+ * (C) Copyright 2006
+ * Detlev Zundel, DENX Software Engineering, dzu@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * This is a very simple standalone application demonstrating
+ * catching IRQs on the MPC52xx architecture.
+ *
+ * The interrupt to be intercepted can be specified as an argument
+ * to the application. Specifying nothing will intercept IRQ1 on the
+ * MPC5200 platform. On the CR825 carrier board from MicroSys this
+ * maps to the ABORT switch :)
+ *
+ * Note that the specified vector is only a logical number specified
+ * by the respective header file.
+ */
+
+#include <common.h>
+#include <exports.h>
+#include <config.h>
+
+#if defined(CONFIG_MPC5xxx)
+#define DFL_IRQ MPC5XXX_IRQ1
+#else
+#define DFL_IRQ 0
+#endif
+
+static void irq_handler (void *arg);
+
+int interrupt (int argc, char *argv[])
+{
+ int c, irq = -1;
+
+ app_startup (argv);
+
+ if (argc > 1)
+ irq = simple_strtoul (argv[1], NULL, 0);
+ if ((irq < 0) || (irq > NR_IRQS))
+ irq = DFL_IRQ;
+
+ printf ("Installing handler for irq vector %d and doing busy wait\n",
+ irq);
+ printf ("Press 'q' to quit\n");
+
+ /* Install interrupt handler */
+ install_hdlr (irq, irq_handler, NULL);
+ while ((c = getc ()) != 'q') {
+ printf ("Ok, ok, I am still alive!\n");
+ }
+
+ free_hdlr (irq);
+ printf ("\nInterrupt handler has been uninstalled\n");
+
+ return (0);
+}
+
+/*
+ * Handler for interrupt
+ */
+static void irq_handler (void *arg)
+{
+ /* just for demonstration */
+ printf ("+");
+}
diff --git a/fs/Makefile b/fs/Makefile
index 79cbdea..273d90e 100644
--- a/fs/Makefile
+++ b/fs/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -24,6 +24,6 @@
SUBDIRS := jffs2 cramfs fdos fat reiserfs ext2
-.depend all:
+$(obj).depend all:
@for dir in $(SUBDIRS) ; do \
$(MAKE) -C $$dir $@ ; done
diff --git a/fs/cramfs/Makefile b/fs/cramfs/Makefile
index 54a475e..1a6f4b7 100644
--- a/fs/cramfs/Makefile
+++ b/fs/cramfs/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,25 +23,27 @@
include $(TOPDIR)/config.mk
-LIB = libcramfs.a
+LIB = $(obj)libcramfs.a
AOBJS =
COBJS = cramfs.o uncompress.o
-OBJS = $(AOBJS) $(COBJS)
+
+SRCS := $(AOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(AOBJS) $(COBJS))
#CPPFLAGS +=
all: $(LIB) $(AOBJS)
-$(LIB): .depend $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/fs/ext2/Makefile b/fs/ext2/Makefile
index 3b19368..2e420d5 100644
--- a/fs/ext2/Makefile
+++ b/fs/ext2/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2003
# Pavel Bartusek, Sysgo Real-Time Solutions AG, pba@sysgo.de
#
@@ -24,25 +27,26 @@
include $(TOPDIR)/config.mk
-LIB = libext2fs.a
+LIB = $(obj)libext2fs.a
AOBJS =
COBJS = ext2fs.o dev.o
-OBJS = $(AOBJS) $(COBJS)
+
+SRCS := $(AOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(AOBJS) $(COBJS))
#CPPFLAGS +=
all: $(LIB) $(AOBJS)
-$(LIB): .depend $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
-
#########################################################################
-.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/fs/fat/Makefile b/fs/fat/Makefile
index e462757..2fa428c 100644
--- a/fs/fat/Makefile
+++ b/fs/fat/Makefile
@@ -19,28 +19,27 @@
# MA 02111-1307 USA
#
-TOPDIR=../../
-
include $(TOPDIR)/config.mk
-LIB = libfat.a
+LIB = $(obj)libfat.a
AOBJS =
COBJS = fat.o file.o
-OBJS = $(AOBJS) $(COBJS)
+SRCS := $(AOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(AOBJS) $(COBJS))
all: $(LIB) $(AOBJS)
-$(LIB): .depend $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/fs/fdos/Makefile b/fs/fdos/Makefile
index c25e744..e55ac8a 100644
--- a/fs/fdos/Makefile
+++ b/fs/fdos/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2002
# Stäubli Faverges - <www.staubli.com>
# Pierre AUBERT p.aubert@staubli.com
@@ -25,25 +28,27 @@
include $(TOPDIR)/config.mk
-LIB = libfdos.a
+LIB = $(obj)libfdos.a
AOBJS =
COBJS = fat.o vfat.o dev.o fdos.o fs.o subdir.o
-OBJS = $(AOBJS) $(COBJS)
+
+SRCS := $(AOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(AOBJS) $(COBJS))
#CPPFLAGS +=
all: $(LIB) $(AOBJS)
-$(LIB): .depend $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/fs/jffs2/Makefile b/fs/jffs2/Makefile
index f28b17a..82436bb 100644
--- a/fs/jffs2/Makefile
+++ b/fs/jffs2/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,26 +23,28 @@
include $(TOPDIR)/config.mk
-LIB = libjffs2.a
+LIB = $(obj)libjffs2.a
AOBJS =
COBJS = jffs2_1pass.o compr_rtime.o compr_rubin.o compr_zlib.o mini_inflate.o
COBJS += compr_lzo.o compr_lzari.o
-OBJS = $(AOBJS) $(COBJS)
+
+SRCS := $(AOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(AOBJS) $(COBJS))
#CPPFLAGS +=
all: $(LIB) $(AOBJS)
-$(LIB): .depend $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/fs/reiserfs/Makefile b/fs/reiserfs/Makefile
index 98a9a8d..45028cb 100644
--- a/fs/reiserfs/Makefile
+++ b/fs/reiserfs/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2003
# Pavel Bartusek, Sysgo Real-Time Solutions AG, pba@sysgo.de
#
@@ -24,25 +27,26 @@
include $(TOPDIR)/config.mk
-LIB = libreiserfs.a
+LIB = $(obj)libreiserfs.a
AOBJS =
COBJS = reiserfs.o dev.o mode_string.o
-OBJS = $(AOBJS) $(COBJS)
+
+SRCS := $(AOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(AOBJS) $(COBJS))
#CPPFLAGS +=
all: $(LIB) $(AOBJS)
-$(LIB): .depend $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
-
#########################################################################
-.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/include/405_mal.h b/include/405_mal.h
index 0598586..2a42184 100644
--- a/include/405_mal.h
+++ b/include/405_mal.h
@@ -92,7 +92,7 @@
#define MAL_ESR_PBEI 0x00000001
/* ^^ ^^ */
/* Mal IER */
-#ifdef CONFIG_440SPE
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#define MAL_IER_PT 0x00000080
#define MAL_IER_PRE 0x00000040
#define MAL_IER_PWE 0x00000020
diff --git a/include/440_i2c.h b/include/440_i2c.h
index 9c90a9e..0c2bf36 100644
--- a/include/440_i2c.h
+++ b/include/440_i2c.h
@@ -1,7 +1,8 @@
#ifndef _440_i2c_h_
#define _440_i2c_h_
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#define I2C_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x00000700)
#else
#define I2C_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x00000400)
diff --git a/include/_exports.h b/include/_exports.h
index 61dcaaf..2b8ec3d 100644
--- a/include/_exports.h
+++ b/include/_exports.h
@@ -12,6 +12,9 @@ EXPORT_FUNC(udelay)
EXPORT_FUNC(get_timer)
EXPORT_FUNC(vprintf)
EXPORT_FUNC(do_reset)
+EXPORT_FUNC(getenv)
+EXPORT_FUNC(setenv)
+EXPORT_FUNC(simple_strtoul)
#if (CONFIG_COMMANDS & CFG_CMD_I2C)
EXPORT_FUNC(i2c_write)
EXPORT_FUNC(i2c_read)
diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h
index 44b23f1..bbd3497 100644
--- a/include/asm-ppc/processor.h
+++ b/include/asm-ppc/processor.h
@@ -728,6 +728,10 @@
#define PVR_440EP_RC 0x422218D4 /* 440EP rev C and 440GR rev B have same PVR */
#define PVR_440GR_RA 0x422218D3 /* 440EP rev B and 440GR rev A have same PVR */
#define PVR_440GR_RB 0x422218D4 /* 440EP rev C and 440GR rev B have same PVR */
+#define PVR_440EPX1_RA 0x216218D0 /* 440EPX rev A with Security / Kasumi */
+#define PVR_440EPX2_RA 0x216218D4 /* 440EPX rev A without Security / Kasumi */
+#define PVR_440GRX1_RA 0x216218D8 /* 440GRX rev A with Security / Kasumi */
+#define PVR_440GRX2_RA 0x216218DC /* 440GRX rev A without Security / Kasumi */
#define PVR_440GX_RA 0x51B21850
#define PVR_440GX_RB 0x51B21851
#define PVR_440GX_RC 0x51B21892
diff --git a/include/asm-ppc/u-boot.h b/include/asm-ppc/u-boot.h
index f7aa55f..794a6d4 100644
--- a/include/asm-ppc/u-boot.h
+++ b/include/asm-ppc/u-boot.h
@@ -108,7 +108,8 @@ typedef struct bd_info {
#endif
#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || defined (CONFIG_440GX) || \
- defined(CONFIG_440EP) || defined(CONFIG_440GR)
+ defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
unsigned int bi_opbfreq; /* OPB clock in Hz */
int bi_iic_fast[2]; /* Use fast i2c mode */
#endif
diff --git a/include/common.h b/include/common.h
index bd41ae1..bee2fb7 100644
--- a/include/common.h
+++ b/include/common.h
@@ -109,6 +109,12 @@ typedef volatile unsigned char vu_char;
#define debugX(level,fmt,args...)
#endif /* DEBUG */
+#define BUG() do { \
+ printf("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __FUNCTION__); \
+ panic("BUG!"); \
+} while (0)
+#define BUG_ON(condition) do { if (unlikely((condition)!=0)) BUG(); } while(0)
+
typedef void (interrupt_handler_t)(void *);
#include <asm/u-boot.h> /* boot information for Linux kernel */
@@ -603,7 +609,7 @@ void show_boot_progress (int status);
#endif
#ifdef CONFIG_INIT_CRITICAL
-#error CONFIG_INIT_CRITICAL is depracted!
+#error CONFIG_INIT_CRITICAL is deprecated!
#error Read section CONFIG_SKIP_LOWLEVEL_INIT in README.
#endif
diff --git a/include/configs/CPCI440.h b/include/configs/CPCI440.h
index a5bc773..90d3a8d 100644
--- a/include/configs/CPCI440.h
+++ b/include/configs/CPCI440.h
@@ -31,7 +31,8 @@
/*-----------------------------------------------------------------------
* High Level Configuration Options
*----------------------------------------------------------------------*/
-#define CONFIG_EBONY 1 /* Board is ebony */
+#define CONFIG_CPCI440 1 /* Board is ebony */
+#define CONFIG_440GP 1 /* Specifc GP support */
#define CONFIG_4xx 1 /* ... PPC4xx family */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
#undef CFG_DRAM_TEST /* Disable-takes long time! */
diff --git a/include/configs/CPU87.h b/include/configs/CPU87.h
index 7a1dada..ce969ec 100644
--- a/include/configs/CPU87.h
+++ b/include/configs/CPU87.h
@@ -527,7 +527,7 @@
PSDMR_LDOTOPRE_1C |\
PSDMR_WRC_1C |\
PSDMR_CL_2)
-
+
/*
* Init Memory Controller:
*
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index be83b67..e0de5c1 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -37,7 +37,8 @@
#define CONFIG_TQM5200 1 /* ... on TQM5200 module */
#undef CONFIG_TQM5200_REV100 /* define for revision 100 modules */
-#ifndef CONFIG_CAM5200 /* On a Cameron board or ... */
+/* On a Cameron or on a FO300 board or ... */
+#if !defined(CONFIG_CAM5200) && !defined(CONFIG_FO300)
#define CONFIG_STK52XX 1 /* ... on a STK52XX board */
#endif
@@ -58,6 +59,20 @@
#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
+#ifdef CONFIG_FO300
+#define CFG_DEVICE_NULLDEV 1 /* enable null device */
+#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* used to detect S1 switch position */
+#define CONFIG_USB_BIN_FIXUP 1 /* for a buggy USB device */
+#if 0
+#define FO300_SILENT_CONSOLE_WHEN_S1_CLOSED 1 /* silent console on PSC1 when S1 */
+ /* switch is closed */
+#endif
+
+#undef FO300_SILENT_CONSOLE_WHEN_S1_CLOSED /* silent console on PSC1 when S1 */
+ /* switch is open */
+#endif /* CONFIG_FO300 */
+
#ifdef CONFIG_STK52XX
#define CONFIG_PS2KBD /* AT-PS/2 Keyboard */
#define CONFIG_PS2MULT /* .. on PS/2 Multiplexer */
@@ -105,12 +120,18 @@
#define CONFIG_VIDEO_SM501_32BPP
#define CONFIG_CFB_CONSOLE
#define CONFIG_VIDEO_LOGO
-#define CONFIG_VGA_AS_SINGLE_DEVICE
+
+#ifndef CONFIG_FO300
#define CONFIG_CONSOLE_EXTRA_INFO
+#else
+#define CONFIG_VIDEO_BMP_LOGO
+#endif
+
+#define CONFIG_VGA_AS_SINGLE_DEVICE
#define CONFIG_VIDEO_SW_CURSOR
#define CONFIG_SPLASH_SCREEN
#define CFG_CONSOLE_IS_IN_ENV
-#endif
+#endif /* #ifndef CONFIG_TQM5200S */
#ifdef CONFIG_VIDEO
#define ADD_BMP_CMD CFG_CMD_BMP
@@ -124,7 +145,7 @@
#define CONFIG_ISO_PARTITION
/* USB */
-#ifdef CONFIG_STK52XX
+#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300)
#define CONFIG_USB_OHCI
#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT
#define CONFIG_USB_STORAGE
@@ -148,7 +169,7 @@
#endif
/* IDE */
-#if defined (CONFIG_MINIFAP) || defined (CONFIG_STK52XX)
+#if defined (CONFIG_MINIFAP) || defined (CONFIG_STK52XX) || defined(CONFIG_FO300)
#define ADD_IDE_CMD (CFG_CMD_IDE | CFG_CMD_FAT | CFG_CMD_EXT2)
#else
#define ADD_IDE_CMD 0
@@ -224,6 +245,12 @@
"erase FC000000 FC03FFFF;" \
"cp.b 200000 FC000000 ${filesize};" \
"protect on FC000000 FC03FFFF\0"
+#elif defined (CONFIG_FO300)
+# define ENV_UPDT \
+ "update=protect off FC000000 FC05FFFF;" \
+ "erase FC000000 FC05FFFF;" \
+ "cp.b 200000 FC000000 ${filesize};" \
+ "protect on FC000000 FC05FFFF\0"
#else
# error "Unknown Carrier Board"
#endif /* CONFIG_STK52XX */
@@ -378,6 +405,13 @@
"2m(initrd)," \
"8m(misc)," \
"16m(big-fs)"
+#elif defined (CONFIG_FO300)
+# define MTDPARTS_DEFAULT "mtdparts=TQM5200-0:640k(firmware)," \
+ "1408k(kernel)," \
+ "2m(initrd)," \
+ "4m(small-fs)," \
+ "8m(misc)," \
+ "16m(big-fs)"
#else
# error "Unknown Carrier Board"
#endif /* CONFIG_STK52XX */
@@ -450,15 +484,18 @@
* use ALT CAN position: Bits 2-3 (mask: 0x30000000):
* 00 -> No Alternatives, CAN1/2 on PSC2 according to PSC2 setting.
* 01 -> CAN1 on I2C1, CAN2 on Tmr0/1.
- * Use for REV200 STK52XX boards. Do not use with REV100 modules
- * (because, there I2C1 is used as I2C bus)
+ * Use for REV200 STK52XX boards and FO300 boards. Do not use
+ * with REV100 modules (because, there I2C1 is used as I2C bus)
* use PSC1 as UART: Bits 28-31 (mask: 0x00000007): 0100
* use PSC2 as CAN: Bits 25:27 (mask: 0x00000030)
* 000 -> All PSC2 pins are GIOPs
* 001 -> CAN1/2 on PSC2 pins
* Use for REV100 STK52xx boards
+ * 01x -> Use AC97
+ * use PSC3: Bits 20-23 (mask: 0x00000f00)
+ * 1100 -> UART/SPI (on FO300 board)
* use PSC6:
- * on STK52xx:
+ * on STK52xx and FO300:
* use as UART. Pins PSC6_0 to PSC6_3 are used.
* Bits 9:11 (mask: 0x00700000):
* 101 -> PSC6 : Extended POST test is not available
@@ -480,6 +517,8 @@
# define CFG_GPS_PORT_CONFIG 0x91500004
# endif
# endif
+#elif defined (CONFIG_FO300)
+# define CFG_GPS_PORT_CONFIG 0x91502c24
#else /* TMQ5200 Inbetriebnahme-Board */
# define CFG_GPS_PORT_CONFIG 0x81000004
#endif
diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index cec7e3e..92c7016 100644
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -422,9 +422,9 @@ extern int tqm834x_num_flash_banks;
#define CFG_SICRL SICRL_LDP_A
/* i-cache and d-cache disabled */
-#define CFG_HID0_INIT 0x000000000
-#define CFG_HID0_FINAL CFG_HID0_INIT
-#define CFG_HID2 0x000000000
+#define CFG_HID0_INIT 0x000000000
+#define CFG_HID0_FINAL CFG_HID0_INIT
+#define CFG_HID2 HID2_HBE
/* DDR 0 - 512M */
#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
@@ -437,12 +437,21 @@ extern int tqm834x_num_flash_banks;
#define CFG_IBAT2U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
/* PCI */
-#define CFG_IBAT3L (CFG_PCI1_MEM_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#ifdef CONFIG_PCI
+#define CFG_IBAT3L (CFG_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
#define CFG_IBAT3U (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_IBAT4L (CFG_PCI1_MEM_BASE + 0x10000000 | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT4L (CFG_PCI1_MEM_BASE + 0x10000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
#define CFG_IBAT4U (CFG_PCI1_MEM_BASE + 0x10000000 | BATU_BL_256M | BATU_VS | BATU_VP)
#define CFG_IBAT5L (CFG_PCI1_IO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
#define CFG_IBAT5U (CFG_PCI1_IO_BASE + 0x10000000 | BATU_BL_16M | BATU_VS | BATU_VP)
+#else
+#define CFG_IBAT3L (0)
+#define CFG_IBAT3U (0)
+#define CFG_IBAT4L (0)
+#define CFG_IBAT4U (0)
+#define CFG_IBAT5L (0)
+#define CFG_IBAT5U (0)
+#endif
/* IMMRBAR */
#define CFG_IBAT6L (CFG_IMMRBAR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h
index cd4339b..4961011 100644
--- a/include/configs/bamboo.h
+++ b/include/configs/bamboo.h
@@ -73,6 +73,7 @@
/*-----------------------------------------------------------------------
* Initial RAM & stack pointer (placed in SDRAM)
*----------------------------------------------------------------------*/
+#define CFG_INIT_RAM_DCACHE 1 /* d-cache as init ram */
#define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */
#define CFG_INIT_RAM_END (4 << 10)
#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */
diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h
index ce33b85..0c935bf 100644
--- a/include/configs/mcc200.h
+++ b/include/configs/mcc200.h
@@ -37,12 +37,12 @@
#define CONFIG_MISC_INIT_R
-#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
/*
@@ -51,16 +51,36 @@
* To select console on the one of 8 external UARTs,
* define CONFIG_QUART_CONSOLE as 1, 2, 3, or 4 for the first Quad UART,
* or as 5, 6, 7, or 8 for the second Quad UART.
+ * COM11, COM12, COM13, COM14 are located on the second Quad UART.
*
* CONFIG_PSC_CONSOLE must be undefined in this case.
*/
-/* #define CONFIG_QUART_CONSOLE 1 */ /* console is on UART1 of QUART1 */
+#if !defined(CONFIG_PRS200)
+/* MCC200 configuration: */
+#ifdef CONFIG_CONSOLE_COM12
+#define CONFIG_QUART_CONSOLE 6 /* console is on UARTF of QUART2 */
+#else
+#define CONFIG_QUART_CONSOLE 8 /* console is on UARTH of QUART2 */
+#endif
+#else
+/* PRS200 configuration: */
+#undef CONFIG_QUART_CONSOLE
+#endif /* CONFIG_PRS200 */
/*
* To select console on PSC1, define CONFIG_PSC_CONSOLE as 1
* and undefine CONFIG_QUART_CONSOLE.
*/
-#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
-#if defined(CONFIG_QUART_CONSOLE) && defined(CONFIG_PSC_CONSOLE)
+#if !defined(CONFIG_PRS200)
+/* MCC200 configuration: */
+#define CONFIG_SERIAL_MULTI 1
+#define CONFIG_PSC_CONSOLE 1 /* PSC1 may be COM */
+#define CONFIG_PSC_CONSOLE2 2 /* PSC2 is PSoC */
+#else
+/* PRS200 configuration: */
+#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
+#endif
+#if defined(CONFIG_QUART_CONSOLE) && defined(CONFIG_PSC_CONSOLE) && \
+ !defined(CONFIG_SERIAL_MULTI)
#error "Select only one console device!"
#endif
#define CONFIG_BAUDRATE 115200
@@ -72,7 +92,7 @@
/* USB */
#define CONFIG_USB_OHCI
-#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT
+#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT
#define CONFIG_USB_STORAGE
/*
@@ -98,33 +118,46 @@
#undef CONFIG_BOOTARGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define XMK_STR(x) #x
+#define MK_STR(x) XMK_STR(x)
+
+#ifdef CONFIG_PRS200
+# define CFG__BOARDNAME "prs200"
+# define CFG__LINUX_CONSOLE "ttyS0"
+#else
+# define CFG__BOARDNAME "mcc200"
+# define CFG__LINUX_CONSOLE "ttyEU7"
+#endif
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
- "hostname=mcc200\0" \
+ "hostname=" CFG__BOARDNAME "\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
"addip=setenv bootargs ${bootargs} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
":${hostname}:${netdev}:off panic=1\0" \
- "flash_nfs=run nfsargs addip;" \
+ "addcons=setenv bootargs ${bootargs} " \
+ "console=${console},${baudrate}\0" \
+ "flash_nfs=run nfsargs addip addcons;" \
"bootm ${kernel_addr}\0" \
- "flash_self=run ramargs addip;" \
+ "flash_self=run ramargs addip addcons;" \
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
- "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
+ "net_nfs=tftp 200000 ${bootfile};" \
+ "run nfsargs addip addcons;bootm\0" \
+ "console=" CFG__LINUX_CONSOLE "\0" \
"rootpath=/opt/eldk/ppc_6xx\0" \
- "bootfile=/tftpboot/mcc200/uImage\0" \
- "baudrate=115200\0" \
- "load=tftp 200000 /tftpboot/mcc200/u-boot.bin\0" \
- "update=protect off FFF00000 +${filesize};" \
- "era FFF00000 +${filesize};" \
- "cp.b 200000 FFF00000 ${filesize}\0" \
- "serverip=192.168.1.1\0" \
- "ipaddr=192.168.133.144\0" \
- "netmask=255.255.0.0\0" \
+ "bootfile=/tftpboot/" CFG__BOARDNAME "/uImage\0" \
+ "load=tftp 200000 /tftpboot/" CFG__BOARDNAME "/u-boot.bin\0" \
+ "text_base=" MK_STR(TEXT_BASE) "\0" \
+ "update=protect off ${text_base} +${filesize};" \
+ "era ${text_base} +${filesize};" \
+ "cp.b 200000 ${text_base} ${filesize}\0" \
"unlock=yes\0" \
- "ethaddr=00:02:44:7D:73:3B\0" \
""
+#undef MK_STR
+#undef XMK_STR
#define CONFIG_BOOTCOMMAND "run flash_self"
@@ -134,7 +167,7 @@
/*
* IPB Bus clocking configuration.
*/
-#define CFG_IPBSPEED_133 /* define for 133MHz speed */
+#define CFG_IPBSPEED_133 /* define for 133MHz speed */
/*
* I2C configuration
@@ -150,9 +183,9 @@
* TEXT base always at 0xFFF00000
* ENV_ADDR always at 0xFFF40000
* FLASH_BASE at 0xFC000000 for 64 MB (only 32MB are supported, not enough addr lines!!!)
- * 0xFE000000 for 32 MB
- * 0xFF000000 for 16 MB
- * 0xFF800000 for 8 MB
+ * 0xFE000000 for 32 MB
+ * 0xFF000000 for 16 MB
+ * 0xFF800000 for 8 MB
*/
#define CFG_FLASH_BASE 0xfc000000
#define CFG_FLASH_SIZE 0x04000000
@@ -174,9 +207,9 @@
#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */
-#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
+#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
-#define CFG_ENV_SECT_SIZE 0x40000 /* size of one complete sector */
+#define CFG_ENV_SECT_SIZE 0x40000 /* size of one complete sector */
#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
@@ -206,7 +239,7 @@
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
-#define CFG_MONITOR_BASE TEXT_BASE
+#define CFG_MONITOR_BASE TEXT_BASE
#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
# define CFG_RAMBOOT 1
#endif
@@ -226,27 +259,45 @@
#define CONFIG_PHY_ADDR 1
/*
+ * LCD Splash Screen
+ */
+#if !defined(CONFIG_PRS200)
+#define CONFIG_LCD 1
+#endif
+
+#if defined(CONFIG_LCD)
+#define CONFIG_SPLASH_SCREEN 1
+#define CFG_CONSOLE_IS_IN_ENV 1
+#define LCD_BPP LCD_MONOCHROME
+#endif
+
+/*
* GPIO configuration
*/
/* 0x10000004 = 32MB SDRAM */
/* 0x90000004 = 64MB SDRAM */
+#if defined(CONFIG_LCD)
+/* set PSC2 in UART mode */
+#define CFG_GPS_PORT_CONFIG 0x00000044
+#else
#define CFG_GPS_PORT_CONFIG 0x00000004
+#endif
/*
* Miscellaneous configurable options
*/
-#define CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
-#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
+#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
#define CFG_LOAD_ADDR 0x100000 /* default load address */
@@ -309,7 +360,7 @@
* One of four SC16C554 UARTs is selected with
* A3-A4 (DA5-DA6) lines.
*/
-#if (CONFIG_QUART_CONSOLE > 0) && (CONFIG_QUART_CONSOLE < 5)
+#if (CONFIG_QUART_CONSOLE > 0) && (CONFIG_QUART_CONSOLE < 5) && !defined(CONFIG_PRS200)
#define CFG_NS16550_COM1 (CFG_CS2_START | (CONFIG_QUART_CONSOLE - 1)<<5)
#elif (CONFIG_QUART_CONSOLE > 4) && (CONFIG_QUART_CONSOLE < 9)
#define CFG_NS16550_COM1 (CFG_CS1_START | (CONFIG_QUART_CONSOLE - 5)<<5)
diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h
index 50c1c4f..23bdfc8 100644
--- a/include/configs/pcs440ep.h
+++ b/include/configs/pcs440ep.h
@@ -63,6 +63,7 @@
/*-----------------------------------------------------------------------
* Initial RAM & stack pointer (placed in SDRAM)
*----------------------------------------------------------------------*/
+#define CFG_INIT_RAM_DCACHE 1 /* d-cache as init ram */
#define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */
#define CFG_INIT_RAM_END (8 << 10)
#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data*/
diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
new file mode 100644
index 0000000..f67fd91
--- /dev/null
+++ b/include/configs/sequoia.h
@@ -0,0 +1,429 @@
+/*
+ * (C) Copyright 2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * (C) Copyright 2006
+ * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
+ * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * sequoia.h - configuration for Sequoia board (PowerPC440EPx)
+ ***********************************************************************/
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+/* This config file is used for Sequoia (440EPx) and Rainier (440GRx) */
+#ifndef CONFIG_RAINIER
+#define CONFIG_SEQUOIA 1 /* Board is Sequoia */
+#define CONFIG_440EPX 1 /* Specific PPC440EPx */
+#else
+#define CONFIG_440GRX 1 /* Specific PPC440GRx */
+#endif
+#define CONFIG_4xx 1 /* ... PPC4xx family */
+#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
+
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
+#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
+
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ *----------------------------------------------------------------------*/
+#define CFG_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Monitor */
+#define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */
+
+#define CFG_BOOT_BASE_ADDR 0xf0000000
+#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
+#define CFG_FLASH_BASE 0xfe000000 /* start of FLASH */
+#define CFG_MONITOR_BASE TEXT_BASE
+#define CFG_NAND_ADDR 0xd0000000 /* NAND Flash */
+#define CFG_OCM_BASE 0xe0010000 /* ocm */
+#define CFG_PCI_BASE 0xe0000000 /* Internal PCI regs */
+#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */
+#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000
+#define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000
+#define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000
+
+/* Don't change either of these */
+#define CFG_PERIPHERAL_BASE 0xef600000 /* internal peripherals */
+
+#define CFG_USB2D0_BASE 0xe0000100
+#define CFG_USB_DEVICE 0xe0000000
+#define CFG_USB_HOST 0xe0000400
+#define CFG_BCSR_BASE 0xc0000000
+
+/*-----------------------------------------------------------------------
+ * Initial RAM & stack pointer
+ *----------------------------------------------------------------------*/
+/* 440EPx/440GRx have 16KB of internal SRAM, so no need for D-Cache */
+#define CFG_INIT_RAM_OCM 1 /* OCM as init ram */
+#define CFG_INIT_RAM_ADDR CFG_OCM_BASE /* OCM */
+
+#define CFG_INIT_RAM_END (4 << 10)
+#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#define CFG_EXT_SERIAL_CLOCK 11059200 /* ext. 11.059MHz clk */
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SERIAL_MULTI 1
+/* define this if you want console on UART1 */
+#undef CONFIG_UART1_CONSOLE
+
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
+#else
+#define CFG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */
+#endif
+
+/*-----------------------------------------------------------------------
+ * FLASH related
+ *----------------------------------------------------------------------*/
+#define CFG_FLASH_CFI /* The flash is CFI compatible */
+#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */
+
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
+#define CFG_FLASH_PROTECTION 1 /* use hardware flash protection */
+
+#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
+#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */
+
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
+#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
+
+/* Address and size of Redundant Environment Sector */
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+#endif
+
+/*-----------------------------------------------------------------------
+ * NAND FLASH
+ *----------------------------------------------------------------------*/
+#define CFG_MAX_NAND_DEVICE 1
+#define NAND_MAX_CHIPS 1
+#define CFG_NAND_BASE CFG_NAND_ADDR
+
+/*
+ * IPL (Initial Program Loader, integrated inside CPU)
+ * Will load first 4k from NAND (SPL) into cache and execute it from there.
+ *
+ * SPL (Secondary Program Loader)
+ * Will load special U-Boot version (NUB) from NAND and execute it. This SPL
+ * has to fit into 4kByte. It sets up the CPU and configures the SDRAM
+ * controller and the NAND controller so that the special U-Boot image can be
+ * loaded from NAND to SDRAM.
+ *
+ * NUB (NAND U-Boot)
+ * This NAND U-Boot (NUB) is a special U-Boot version which can be started
+ * from RAM. Therefore it mustn't (re-)configure the SDRAM controller.
+ *
+ * On 440EPx the SPL is copied to SDRAM before the NAND controller is
+ * set up. While still running from cache, I experienced problems accessing
+ * the NAND controller. sr - 2006-08-25
+ */
+#define CFG_NAND_BOOT_SPL_SRC 0xfffff000 /* SPL location */
+#define CFG_NAND_BOOT_SPL_SIZE (4 << 10) /* SPL size */
+#define CFG_NAND_BOOT_SPL_DST (CFG_OCM_BASE + (12 << 10)) /* Copy SPL here */
+#define CFG_NAND_U_BOOT_DST 0x01000000 /* Load NUB to this addr */
+#define CFG_NAND_U_BOOT_START CFG_NAND_U_BOOT_DST /* Start NUB from this addr */
+#define CFG_NAND_BOOT_SPL_DELTA (CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)
+
+/*
+ * Define the partitioning of the NAND chip (only RAM U-Boot is needed here)
+ */
+#define CFG_NAND_U_BOOT_OFFS (16 << 10) /* Offset to RAM U-Boot image */
+#define CFG_NAND_U_BOOT_SIZE (384 << 10) /* Size of RAM U-Boot image */
+
+/*
+ * Now the NAND chip has to be defined (no autodetection used!)
+ */
+#define CFG_NAND_PAGE_SIZE (512) /* NAND chip page size */
+#define CFG_NAND_BLOCK_SIZE (16 << 10) /* NAND chip block size */
+#define CFG_NAND_PAGE_COUNT (32) /* NAND chip page count */
+#define CFG_NAND_BAD_BLOCK_POS (5) /* Location of bad block marker */
+#undef CFG_NAND_4_ADDR_CYCLE /* No fourth addr used (<=32MB) */
+
+#ifdef CFG_ENV_IS_IN_NAND
+/*
+ * For NAND booting the environment is embedded in the U-Boot image. Please take
+ * look at the file board/amcc/sequoia/u-boot-nand.lds for details.
+ */
+#define CFG_ENV_SIZE CFG_NAND_BLOCK_SIZE
+#define CFG_ENV_OFFSET (CFG_NAND_U_BOOT_OFFS + CFG_ENV_SIZE)
+#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET + CFG_ENV_SIZE)
+#endif
+
+/*-----------------------------------------------------------------------
+ * DDR SDRAM
+ *----------------------------------------------------------------------*/
+#define CFG_MBYTES_SDRAM (256) /* 256MB */
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+
+#define CFG_I2C_MULTI_EEPROMS
+#define CFG_I2C_EEPROM_ADDR (0xa8>>1)
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CFG_EEPROM_PAGE_WRITE_BITS 3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+
+/* I2C SYSMON (LM75, AD7414 is almost compatible) */
+#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */
+#define CONFIG_DTT_AD7414 1 /* use AD7414 */
+#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */
+#define CFG_DTT_MAX_TEMP 70
+#define CFG_DTT_LOW_TEMP -30
+#define CFG_DTT_HYSTERESIS 3
+
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
+
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "hostname=sequoia\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off panic=1\0" \
+ "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
+ "flash_nfs=run nfsargs addip addtty;" \
+ "bootm ${kernel_addr}\0" \
+ "flash_self=run ramargs addip addtty;" \
+ "bootm ${kernel_addr} ${ramdisk_addr}\0" \
+ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
+ "bootm\0" \
+ "rootpath=/opt/eldk/ppc_4xx\0" \
+ "bootfile=/tftpboot/sequoia/uImage\0" \
+ "kernel_addr=FE000000\0" \
+ "ramdisk_addr=FE180000\0" \
+ "load=tftp 100000 /tftpboot/sequoia/u-boot.bin\0" \
+ "update=protect off FFFA0000 FFFFFFFF;era FFFA0000 FFFFFFFF;" \
+ "cp.b 100000 FFFA0000 60000\0" \
+ "upd=run load;run update\0" \
+ ""
+#define CONFIG_BOOTCOMMAND "run flash_self"
+
+#if 0
+#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
+#else
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+#endif
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#define CONFIG_M88E1111_PHY 1
+#define CONFIG_IBM_EMAC4_V4 1
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_PHY_ADDR 0 /* PHY address, See schematics */
+
+#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
+#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
+
+#define CONFIG_HAS_ETH0
+#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
+
+#define CONFIG_NET_MULTI 1
+#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
+#define CONFIG_PHY1_ADDR 1
+
+/* USB */
+#ifdef CONFIG_440EPX
+#define CONFIG_USB_OHCI
+#define CONFIG_USB_STORAGE
+
+/* Comment this out to enable USB 1.1 device */
+#define USB_2_0_DEVICE
+
+#define CMD_USB CFG_CMD_USB
+#else
+#define CMD_USB 0 /* no USB on 440GRx */
+#endif /* CONFIG_440EPX */
+
+/* Partitions */
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_ASKENV | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_DTT | \
+ CFG_CMD_DIAG | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_ELF | \
+ CFG_CMD_FAT | \
+ CFG_CMD_I2C | \
+ CFG_CMD_IRQ | \
+ CFG_CMD_MII | \
+ CFG_CMD_NAND | \
+ CFG_CMD_NET | \
+ CFG_CMD_NFS | \
+ CFG_CMD_PCI | \
+ CFG_CMD_PING | \
+ CFG_CMD_REGINFO | \
+ CFG_CMD_SDRAM | \
+ CMD_USB)
+
+#define CONFIG_SUPPORT_VFAT
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*-----------------------------------------------------------------------
+ * Miscellaneous configurable options
+ *----------------------------------------------------------------------*/
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
+#define CONFIG_LOOPW 1 /* enable loopw command */
+#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *----------------------------------------------------------------------*/
+/* General PCI */
+#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_PNP /* do (not) pci plug-and-play */
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/
+
+/* Board-specific PCI */
+#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */
+#define CFG_PCI_TARGET_INIT
+#define CFG_PCI_MASTER_INIT
+
+#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */
+#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ *----------------------------------------------------------------------*/
+#define CFG_FLASH CFG_FLASH_BASE
+#define CFG_NAND 0xD0000000
+#define CFG_CPLD 0xC0000000
+
+/*
+ * On Sequoia CS0 and CS3 are switched when configuring for NAND booting
+ */
+#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+#define CFG_NAND_CS 3 /* NAND chip connected to CSx */
+/* Memory Bank 0 (NOR-FLASH) initialization */
+#define CFG_EBC_PB0AP 0x03017300
+#define CFG_EBC_PB0CR (CFG_FLASH | 0xba000)
+
+/* Memory Bank 3 (NAND-FLASH) initialization */
+#define CFG_EBC_PB3AP 0x018003c0
+#define CFG_EBC_PB3CR (CFG_NAND | 0x1c000)
+#else
+#define CFG_NAND_CS 0 /* NAND chip connected to CSx */
+/* Memory Bank 3 (NOR-FLASH) initialization */
+#define CFG_EBC_PB3AP 0x03017300
+#define CFG_EBC_PB3CR (CFG_FLASH | 0xba000)
+
+/* Memory Bank 0 (NAND-FLASH) initialization */
+#define CFG_EBC_PB0AP 0x018003c0
+#define CFG_EBC_PB0CR (CFG_NAND | 0x1c000)
+#endif
+
+/* Memory Bank 2 (CPLD) initialization */
+#define CFG_EBC_PB2AP 0x24814580
+#define CFG_EBC_PB2CR (CFG_CPLD | 0x38000)
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ *----------------------------------------------------------------------*/
+#define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */
+#define CFG_CACHELINE_SIZE 32 /* ... */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+#endif /* __CONFIG_H */
diff --git a/include/configs/sorcery.h b/include/configs/sorcery.h
index 3d907f8..4937638 100644
--- a/include/configs/sorcery.h
+++ b/include/configs/sorcery.h
@@ -261,6 +261,7 @@
#define CONFIG_MPC8220_FEC 1
#define CONFIG_FEC_10MBIT 1 /* Workaround for FEC 100Mbit problem */
#define CONFIG_PHY_ADDR 0x1F
+#define CONFIG_MII 1
/*
* Miscellaneous configurable options
diff --git a/include/configs/yellowstone.h b/include/configs/yellowstone.h
index cf42b66..ba27f37 100644
--- a/include/configs/yellowstone.h
+++ b/include/configs/yellowstone.h
@@ -65,6 +65,7 @@
/*-----------------------------------------------------------------------
* Initial RAM & stack pointer (placed in SDRAM)
*----------------------------------------------------------------------*/
+#define CFG_INIT_RAM_DCACHE 1 /* d-cache as init ram */
#define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */
#define CFG_INIT_RAM_END (8 << 10)
#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data*/
@@ -109,6 +110,8 @@
#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
+
#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
#ifdef CFG_ENV_IS_IN_FLASH
diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h
index 86a85b8..3d7b4a2 100644
--- a/include/configs/yosemite.h
+++ b/include/configs/yosemite.h
@@ -65,6 +65,7 @@
/*-----------------------------------------------------------------------
* Initial RAM & stack pointer (placed in SDRAM)
*----------------------------------------------------------------------*/
+#define CFG_INIT_RAM_DCACHE 1 /* d-cache as init ram */
#define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */
#define CFG_INIT_RAM_END (8 << 10)
#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data*/
diff --git a/include/configs/yucca.h b/include/configs/yucca.h
index 884f85c..a6532b5 100644
--- a/include/configs/yucca.h
+++ b/include/configs/yucca.h
@@ -31,9 +31,6 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#define DEBUG
-#undef DEBUG
-
/*-----------------------------------------------------------------------
* High Level Configuration Options
*----------------------------------------------------------------------*/
diff --git a/include/environment.h b/include/environment.h
index 422f800..26b0712 100644
--- a/include/environment.h
+++ b/include/environment.h
@@ -79,6 +79,10 @@
# ifdef CFG_ENV_OFFSET_REDUND
# define CFG_REDUNDAND_ENVIRONMENT
# endif
+# if defined(CONFIG_NAND_U_BOOT)
+/* Use embedded environment in NAND boot versions */
+# define ENV_IS_EMBEDDED 1
+# endif
#endif /* CFG_ENV_IS_IN_NAND */
diff --git a/include/exports.h b/include/exports.h
index 0eaf66e..8f7f617 100644
--- a/include/exports.h
+++ b/include/exports.h
@@ -20,6 +20,9 @@ void udelay(unsigned long);
unsigned long get_timer(unsigned long);
void vprintf(const char *, va_list);
void do_reset (void);
+unsigned long simple_strtoul(const char *cp,char **endp,unsigned int base);
+char *getenv (char *name);
+void setenv (char *varname, char *varvalue);
#if (CONFIG_COMMANDS & CFG_CMD_I2C)
int i2c_write (uchar, uint, int , uchar* , int);
int i2c_read (uchar, uint, int , uchar* , int);
@@ -37,7 +40,7 @@ enum {
XF_MAX
};
-#define XF_VERSION 2
+#define XF_VERSION 3
#if defined(CONFIG_I386)
extern gd_t *global_data;
diff --git a/include/fat.h b/include/fat.h
index 0645458..92638d5 100644
--- a/include/fat.h
+++ b/include/fat.h
@@ -175,15 +175,19 @@ typedef struct dir_slot {
__u8 name11_12[4]; /* Last 2 characters in name */
} dir_slot;
-/* Private filesystem parameters */
+/* Private filesystem parameters
+ *
+ * Note: FAT buffer has to be 32 bit aligned
+ * (see FAT32 accesses)
+ */
typedef struct {
+ __u8 fatbuf[FATBUFSIZE]; /* Current FAT buffer */
int fatsize; /* Size of FAT in bits */
__u16 fatlength; /* Length of FAT in sectors */
__u16 fat_sect; /* Starting sector of the FAT */
__u16 rootdir_sect; /* Start sector of root directory */
__u16 clust_size; /* Size of clusters in sectors */
short data_begin; /* The sector of the first cluster, can be negative */
- __u8 fatbuf[FATBUFSIZE]; /* Current FAT buffer */
int fatbufnum; /* Used by get_fatent, init to -1 */
} fsdata;
diff --git a/include/lcd.h b/include/lcd.h
index 7e23736..b688583 100644
--- a/include/lcd.h
+++ b/include/lcd.h
@@ -148,7 +148,14 @@ typedef struct vidinfo {
extern vidinfo_t panel_info;
-#endif /* CONFIG_MPC823 or CONFIG_PXA250 */
+#elif defined(CONFIG_MCC200)
+typedef struct vidinfo {
+ ushort vl_col; /* Number of columns (i.e. 160) */
+ ushort vl_row; /* Number of rows (i.e. 100) */
+
+ u_char vl_bpix; /* Bits per pixel, 0 = 1 */
+} vidinfo_t;
+#endif /* CONFIG_MPC823, CONFIG_PXA250 or CONFIG_MCC200 */
/* Video functions */
diff --git a/include/linux/mtd/compat.h b/include/linux/mtd/compat.h
index 460cd45..fe55087 100644
--- a/include/linux/mtd/compat.h
+++ b/include/linux/mtd/compat.h
@@ -31,11 +31,13 @@
#define max_t(type,x,y) \
({ type __x = (x); type __y = (y); __x > __y ? __x: __y; })
+#ifndef BUG
#define BUG() do { \
printf("U-Boot BUG at %s:%d!\n", __FILE__, __LINE__); \
} while (0)
#define BUG_ON(condition) do { if (condition) BUG(); } while(0)
+#endif /* BUG */
#define likely(x) __builtin_expect(!!(x), 1)
#define unlikely(x) __builtin_expect(!!(x), 0)
diff --git a/include/linux/mtd/ndfc.h b/include/linux/mtd/ndfc.h
new file mode 100644
index 0000000..d0558a9
--- /dev/null
+++ b/include/linux/mtd/ndfc.h
@@ -0,0 +1,67 @@
+/*
+ * linux/include/linux/mtd/ndfc.h
+ *
+ * Copyright (c) 2006 Thomas Gleixner <tglx@linutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Info:
+ * Contains defines, datastructures for ndfc nand controller
+ *
+ */
+#ifndef __LINUX_MTD_NDFC_H
+#define __LINUX_MTD_NDFC_H
+
+/* NDFC Register definitions */
+#define NDFC_CMD 0x00
+#define NDFC_ALE 0x04
+#define NDFC_DATA 0x08
+#define NDFC_ECC 0x10
+#define NDFC_BCFG0 0x30
+#define NDFC_BCFG1 0x34
+#define NDFC_BCFG2 0x38
+#define NDFC_BCFG3 0x3c
+#define NDFC_CCR 0x40
+#define NDFC_STAT 0x44
+#define NDFC_HWCTL 0x48
+#define NDFC_REVID 0x50
+
+#define NDFC_STAT_IS_READY 0x01000000
+
+#define NDFC_CCR_RESET_CE 0x80000000 /* CE Reset */
+#define NDFC_CCR_RESET_ECC 0x40000000 /* ECC Reset */
+#define NDFC_CCR_RIE 0x20000000 /* Interrupt Enable on Device Rdy */
+#define NDFC_CCR_REN 0x10000000 /* Enable wait for Rdy in LinearR */
+#define NDFC_CCR_ROMEN 0x08000000 /* Enable ROM In LinearR */
+#define NDFC_CCR_ARE 0x04000000 /* Auto-Read Enable */
+#define NDFC_CCR_BS(x) (((x) & 0x3) << 24) /* Select Bank on CE[x] */
+#define NDFC_CCR_BS_MASK 0x03000000 /* Select Bank */
+#define NDFC_CCR_ARAC0 0x00000000 /* 3 Addr, 1 Col 2 Row 512b page */
+#define NDFC_CCR_ARAC1 0x00001000 /* 4 Addr, 1 Col 3 Row 512b page */
+#define NDFC_CCR_ARAC2 0x00002000 /* 4 Addr, 2 Col 2 Row 2K page */
+#define NDFC_CCR_ARAC3 0x00003000 /* 5 Addr, 2 Col 3 Row 2K page */
+#define NDFC_CCR_ARAC_MASK 0x00003000 /* Auto-Read mode Addr Cycles */
+#define NDFC_CCR_RPG 0x0000C000 /* Auto-Read Page */
+#define NDFC_CCR_EBCC 0x00000004 /* EBC Configuration Completed */
+#define NDFC_CCR_DHC 0x00000002 /* Direct Hardware Control Enable */
+
+#define NDFC_BxCFG_EN 0x80000000 /* Bank Enable */
+#define NDFC_BxCFG_CED 0x40000000 /* nCE Style */
+#define NDFC_BxCFG_SZ_MASK 0x08000000 /* Bank Size */
+#define NDFC_BxCFG_SZ_8BIT 0x00000000 /* 8bit */
+#define NDFC_BxCFG_SZ_16BIT 0x08000000 /* 16bit */
+
+#define NDFC_MAX_BANKS 4
+
+struct ndfc_controller_settings {
+ uint32_t ccr_settings;
+ uint64_t ndfc_erpn;
+};
+
+struct ndfc_chip_settings {
+ uint32_t bank_settings;
+};
+
+#endif
diff --git a/include/mpc5xxx.h b/include/mpc5xxx.h
index 50a6ac1..1d20d1d 100644
--- a/include/mpc5xxx.h
+++ b/include/mpc5xxx.h
@@ -232,23 +232,92 @@
#define MPC5XXX_ICTL_PER_STS (MPC5XXX_ICTL + 0x0030)
#define MPC5XXX_ICTL_BUS_STS (MPC5XXX_ICTL + 0x0038)
+#define NR_IRQS 64
+
+/* IRQ mapping - these are our logical IRQ numbers */
+#define MPC5XXX_CRIT_IRQ_NUM 4
+#define MPC5XXX_MAIN_IRQ_NUM 17
+#define MPC5XXX_SDMA_IRQ_NUM 17
+#define MPC5XXX_PERP_IRQ_NUM 23
+
+#define MPC5XXX_CRIT_IRQ_BASE 1
+#define MPC5XXX_MAIN_IRQ_BASE (MPC5XXX_CRIT_IRQ_BASE + MPC5XXX_CRIT_IRQ_NUM)
+#define MPC5XXX_SDMA_IRQ_BASE (MPC5XXX_MAIN_IRQ_BASE + MPC5XXX_MAIN_IRQ_NUM)
+#define MPC5XXX_PERP_IRQ_BASE (MPC5XXX_SDMA_IRQ_BASE + MPC5XXX_SDMA_IRQ_NUM)
+
+#define MPC5XXX_IRQ0 (MPC5XXX_CRIT_IRQ_BASE + 0)
+#define MPC5XXX_SLICE_TIMER_0_IRQ (MPC5XXX_CRIT_IRQ_BASE + 1)
+#define MPC5XXX_HI_INT_IRQ (MPC5XXX_CRIT_IRQ_BASE + 2)
+#define MPC5XXX_CCS_IRQ (MPC5XXX_CRIT_IRQ_BASE + 3)
+
+#define MPC5XXX_IRQ1 (MPC5XXX_MAIN_IRQ_BASE + 1)
+#define MPC5XXX_IRQ2 (MPC5XXX_MAIN_IRQ_BASE + 2)
+#define MPC5XXX_IRQ3 (MPC5XXX_MAIN_IRQ_BASE + 3)
+#define MPC5XXX_RTC_PINT_IRQ (MPC5XXX_MAIN_IRQ_BASE + 5)
+#define MPC5XXX_RTC_SINT_IRQ (MPC5XXX_MAIN_IRQ_BASE + 6)
+#define MPC5XXX_RTC_GPIO_STD_IRQ (MPC5XXX_MAIN_IRQ_BASE + 7)
+#define MPC5XXX_RTC_GPIO_WKUP_IRQ (MPC5XXX_MAIN_IRQ_BASE + 8)
+#define MPC5XXX_TMR0_IRQ (MPC5XXX_MAIN_IRQ_BASE + 9)
+#define MPC5XXX_TMR1_IRQ (MPC5XXX_MAIN_IRQ_BASE + 10)
+#define MPC5XXX_TMR2_IRQ (MPC5XXX_MAIN_IRQ_BASE + 11)
+#define MPC5XXX_TMR3_IRQ (MPC5XXX_MAIN_IRQ_BASE + 12)
+#define MPC5XXX_TMR4_IRQ (MPC5XXX_MAIN_IRQ_BASE + 13)
+#define MPC5XXX_TMR5_IRQ (MPC5XXX_MAIN_IRQ_BASE + 14)
+#define MPC5XXX_TMR6_IRQ (MPC5XXX_MAIN_IRQ_BASE + 15)
+#define MPC5XXX_TMR7_IRQ (MPC5XXX_MAIN_IRQ_BASE + 16)
+
+#define MPC5XXX_SDMA_IRQ (MPC5XXX_PERP_IRQ_BASE + 0)
+#define MPC5XXX_PSC1_IRQ (MPC5XXX_PERP_IRQ_BASE + 1)
+#define MPC5XXX_PSC2_IRQ (MPC5XXX_PERP_IRQ_BASE + 2)
+#define MPC5XXX_PSC3_IRQ (MPC5XXX_PERP_IRQ_BASE + 3)
+#define MPC5XXX_PSC6_IRQ (MPC5XXX_PERP_IRQ_BASE + 4)
+#define MPC5XXX_IRDA_IRQ (MPC5XXX_PERP_IRQ_BASE + 4)
+#define MPC5XXX_FEC_IRQ (MPC5XXX_PERP_IRQ_BASE + 5)
+#define MPC5XXX_USB_IRQ (MPC5XXX_PERP_IRQ_BASE + 6)
+#define MPC5XXX_ATA_IRQ (MPC5XXX_PERP_IRQ_BASE + 7)
+#define MPC5XXX_PCI_CNTRL_IRQ (MPC5XXX_PERP_IRQ_BASE + 8)
+#define MPC5XXX_PCI_SCIRX_IRQ (MPC5XXX_PERP_IRQ_BASE + 9)
+#define MPC5XXX_PCI_SCITX_IRQ (MPC5XXX_PERP_IRQ_BASE + 10)
+#define MPC5XXX_PSC4_IRQ (MPC5XXX_PERP_IRQ_BASE + 11)
+#define MPC5XXX_PSC5_IRQ (MPC5XXX_PERP_IRQ_BASE + 12)
+#define MPC5XXX_SPI_MODF_IRQ (MPC5XXX_PERP_IRQ_BASE + 13)
+#define MPC5XXX_SPI_SPIF_IRQ (MPC5XXX_PERP_IRQ_BASE + 14)
+#define MPC5XXX_I2C1_IRQ (MPC5XXX_PERP_IRQ_BASE + 15)
+#define MPC5XXX_I2C2_IRQ (MPC5XXX_PERP_IRQ_BASE + 16)
+#define MPC5XXX_MSCAN1_IRQ (MPC5XXX_PERP_IRQ_BASE + 17)
+#define MPC5XXX_MSCAN2_IRQ (MPC5XXX_PERP_IRQ_BASE + 18)
+#define MPC5XXX_IR_RX_IRQ (MPC5XXX_PERP_IRQ_BASE + 19)
+#define MPC5XXX_IR_TX_IRQ (MPC5XXX_PERP_IRQ_BASE + 20)
+#define MPC5XXX_XLB_ARB_IRQ (MPC5XXX_PERP_IRQ_BASE + 21)
+#define MPC5XXX_BDLC_IRQ (MPC5XXX_PERP_IRQ_BASE + 22)
+
/* General Purpose Timers registers */
#define MPC5XXX_GPT0_ENABLE (MPC5XXX_GPT + 0x0)
#define MPC5XXX_GPT0_COUNTER (MPC5XXX_GPT + 0x4)
+#define MPC5XXX_GPT0_STATUS (MPC5XXX_GPT + 0x0C)
#define MPC5XXX_GPT1_ENABLE (MPC5XXX_GPT + 0x10)
#define MPC5XXX_GPT1_COUNTER (MPC5XXX_GPT + 0x14)
+#define MPC5XXX_GPT1_STATUS (MPC5XXX_GPT + 0x1C)
#define MPC5XXX_GPT2_ENABLE (MPC5XXX_GPT + 0x20)
#define MPC5XXX_GPT2_COUNTER (MPC5XXX_GPT + 0x24)
+#define MPC5XXX_GPT2_STATUS (MPC5XXX_GPT + 0x2C)
#define MPC5XXX_GPT3_ENABLE (MPC5XXX_GPT + 0x30)
#define MPC5XXX_GPT3_COUNTER (MPC5XXX_GPT + 0x34)
+#define MPC5XXX_GPT3_STATUS (MPC5XXX_GPT + 0x3C)
#define MPC5XXX_GPT4_ENABLE (MPC5XXX_GPT + 0x40)
#define MPC5XXX_GPT4_COUNTER (MPC5XXX_GPT + 0x44)
+#define MPC5XXX_GPT4_STATUS (MPC5XXX_GPT + 0x4C)
#define MPC5XXX_GPT5_ENABLE (MPC5XXX_GPT + 0x50)
+#define MPC5XXX_GPT5_STATUS (MPC5XXX_GPT + 0x5C)
#define MPC5XXX_GPT5_COUNTER (MPC5XXX_GPT + 0x54)
#define MPC5XXX_GPT6_ENABLE (MPC5XXX_GPT + 0x60)
#define MPC5XXX_GPT6_COUNTER (MPC5XXX_GPT + 0x64)
+#define MPC5XXX_GPT6_STATUS (MPC5XXX_GPT + 0x6C)
#define MPC5XXX_GPT7_ENABLE (MPC5XXX_GPT + 0x70)
#define MPC5XXX_GPT7_COUNTER (MPC5XXX_GPT + 0x74)
+#define MPC5XXX_GPT7_STATUS (MPC5XXX_GPT + 0x7C)
+
+#define MPC5XXX_GPT_GPIO_PIN(status) ((0x00000100 & (status)) >> 8)
#define MPC5XXX_GPT7_PWMCFG (MPC5XXX_GPT + 0x78)
diff --git a/include/ppc440.h b/include/ppc440.h
index b81e34d..0762e66 100644
--- a/include/ppc440.h
+++ b/include/ppc440.h
@@ -82,7 +82,10 @@
#define ivor13 0x19d /* interrupt vector offset register 13 */
#define ivor14 0x19e /* interrupt vector offset register 14 */
#define ivor15 0x19f /* interrupt vector offset register 15 */
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || \
+ defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE)
#define mcsrr0 0x23a /* machine check save/restore register 0 */
#define mcsrr1 0x23b /* mahcine check save/restore register 1 */
#define mcsr 0x23c /* machine check status register */
@@ -151,7 +154,18 @@
#define sdr_ecid1 0x0081
#define sdr_ecid2 0x0082
#define sdr_jtag 0x00c0
+#if !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX)
#define sdr_ddrdl 0x00e0
+#else
+#define sdr_cfg 0x00e0
+#define SDR_CFG_LT2_MASK 0x01000000 /* Leakage test 2*/
+#define SDR_CFG_64_32BITS_MASK 0x01000000 /* Switch DDR 64 bits or 32 bits */
+#define SDR_CFG_32BITS 0x00000000 /* 32 bits */
+#define SDR_CFG_64BITS 0x01000000 /* 64 bits */
+#define SDR_CFG_MC_V2518_MASK 0x02000000 /* Low VDD2518 (2.5 or 1.8V) */
+#define SDR_CFG_MC_V25 0x00000000 /* 2.5 V */
+#define SDR_CFG_MC_V18 0x02000000 /* 1.8 V */
+#endif /* !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) */
#define sdr_ebc 0x0100
#define sdr_uart0 0x0120 /* UART0 Config */
#define sdr_uart1 0x0121 /* UART1 Config */
@@ -180,6 +194,54 @@
#define sdr_plbtr 0x4200
#define sdr_mfr 0x4300 /* SDR0_MFR reg */
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* test-only!!!! */
+#define DDR0_00 0x00
+#define DDR0_01 0x01
+#define DDR0_02 0x02
+#define DDR0_03 0x03
+#define DDR0_04 0x04
+#define DDR0_05 0x05
+#define DDR0_06 0x06
+#define DDR0_07 0x07
+#define DDR0_08 0x08
+#define DDR0_09 0x09
+#define DDR0_10 0x0A
+#define DDR0_11 0x0B
+#define DDR0_12 0x0C
+#define DDR0_13 0x0D
+#define DDR0_14 0x0E
+#define DDR0_15 0x0F
+#define DDR0_16 0x10
+#define DDR0_17 0x11
+#define DDR0_18 0x12
+#define DDR0_19 0x13
+#define DDR0_20 0x14
+#define DDR0_21 0x15
+#define DDR0_22 0x16
+#define DDR0_23 0x17
+#define DDR0_24 0x18
+#define DDR0_25 0x19
+#define DDR0_26 0x1A
+#define DDR0_27 0x1B
+#define DDR0_28 0x1C
+#define DDR0_29 0x1D
+#define DDR0_30 0x1E
+#define DDR0_31 0x1F
+#define DDR0_32 0x20
+#define DDR0_33 0x21
+#define DDR0_34 0x22
+#define DDR0_35 0x23
+#define DDR0_36 0x24
+#define DDR0_37 0x25
+#define DDR0_38 0x26
+#define DDR0_39 0x27
+#define DDR0_40 0x28
+#define DDR0_41 0x29
+#define DDR0_42 0x2A
+#define DDR0_43 0x2B
+#define DDR0_44 0x2C
+#endif /*CONFIG_440EPX*/
+
/*-----------------------------------------------------------------------------
| SDRAM Controller
+----------------------------------------------------------------------------*/
@@ -787,7 +849,8 @@
#define xbcfg 0x23 /* external bus configuration reg */
#define xbcid 0x24 /* external bus core id reg */
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
/* PLB4 to PLB3 Bridge OUT */
#define P4P3_DCR_BASE 0x020
@@ -877,6 +940,7 @@
#define plb1_bearl (PLB_ARBITER_BASE+ 0x0C)
#define plb1_bearh (PLB_ARBITER_BASE+ 0x0D)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
/* Pin Function Control Register 1 */
#define SDR0_PFC1 0x4101
#define SDR0_PFC1_U1ME_MASK 0x02000000 /* UART1 Mode Enable */
@@ -918,6 +982,178 @@
#define SDR0_USB0_LEEN_DISABLE 0x00000000 /* Little Endian Disable */
#define SDR0_USB0_LEEN_ENABLE 0x00000001 /* Little Endian Enable */
+/* Miscealleneaous Function Reg. */
+#define SDR0_MFR 0x4300
+#define SDR0_MFR_ETH0_CLK_SEL_MASK 0x08000000 /* Ethernet0 Clock Select */
+#define SDR0_MFR_ETH0_CLK_SEL_EXT 0x00000000
+#define SDR0_MFR_ETH1_CLK_SEL_MASK 0x04000000 /* Ethernet1 Clock Select */
+#define SDR0_MFR_ETH1_CLK_SEL_EXT 0x00000000
+#define SDR0_MFR_ZMII_MODE_MASK 0x03000000 /* ZMII Mode Mask */
+#define SDR0_MFR_ZMII_MODE_MII 0x00000000 /* ZMII Mode MII */
+#define SDR0_MFR_ZMII_MODE_SMII 0x01000000 /* ZMII Mode SMII */
+#define SDR0_MFR_ZMII_MODE_RMII_10M 0x02000000 /* ZMII Mode RMII - 10 Mbs */
+#define SDR0_MFR_ZMII_MODE_RMII_100M 0x03000000 /* ZMII Mode RMII - 100 Mbs */
+#define SDR0_MFR_ZMII_MODE_BIT0 0x02000000 /* ZMII Mode Bit0 */
+#define SDR0_MFR_ZMII_MODE_BIT1 0x01000000 /* ZMII Mode Bit1 */
+#define SDR0_MFR_ZM_ENCODE(n) ((((unsigned long)(n))&0x3)<<24)
+#define SDR0_MFR_ZM_DECODE(n) ((((unsigned long)(n))<<24)&0x3)
+
+#define SDR0_MFR_ERRATA3_EN0 0x00800000
+#define SDR0_MFR_ERRATA3_EN1 0x00400000
+#define SDR0_MFR_PKT_REJ_MASK 0x00180000 /* Pkt Rej. Enable Mask */
+#define SDR0_MFR_PKT_REJ_EN 0x00180000 /* Pkt Rej. Enable on both EMAC3 0-1 */
+#define SDR0_MFR_PKT_REJ_EN0 0x00100000 /* Pkt Rej. Enable on EMAC3(0) */
+#define SDR0_MFR_PKT_REJ_EN1 0x00080000 /* Pkt Rej. Enable on EMAC3(1) */
+#define SDR0_MFR_PKT_REJ_POL 0x00200000 /* Packet Reject Polarity */
+
+#endif /* defined(CONFIG_440EP) || defined(CONFIG_440GR) */
+
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#define SDR_USB2D0CR 0x0320
+#define SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK 0x00000004 /* USB 2.0 Device/EBC Master Selection */
+#define SDR0_USB2D0CR_USB2DEV_SELECTION 0x00000004 /* USB 2.0 Device Selection */
+#define SDR0_USB2D0CR_EBC_SELECTION 0x00000000 /* EBC Selection */
+
+#define SDR0_USB2D0CR_USB_DEV_INT_SEL_MASK 0x00000002 /* USB Device Interface Selection */
+#define SDR0_USB2D0CR_USB20D_DEVSEL 0x00000000 /* USB2.0 Device Selected */
+#define SDR0_USB2D0CR_USB11D_DEVSEL 0x00000002 /* USB1.1 Device Selected */
+
+#define SDR0_USB2D0CR_LEEN_MASK 0x00000001 /* Little Endian selection */
+#define SDR0_USB2D0CR_LEEN_DISABLE 0x00000000 /* Little Endian Disable */
+#define SDR0_USB2D0CR_LEEN_ENABLE 0x00000001 /* Little Endian Enable */
+
+/* USB2 Host Control Register */
+#define SDR0_USB2H0CR 0x0340
+#define SDR0_USB2H0CR_WDINT_MASK 0x00000001 /* Host UTMI Word Interface */
+#define SDR0_USB2H0CR_WDINT_8BIT_60MHZ 0x00000000 /* 8-bit/60MHz */
+#define SDR0_USB2H0CR_WDINT_16BIT_30MHZ 0x00000001 /* 16-bit/30MHz */
+#define SDR0_USB2H0CR_EFLADJ_MASK 0x0000007e /* EHCI Frame Length Adjustment */
+
+/* Pin Function Control Register 1 */
+#define SDR0_PFC1 0x4101
+#define SDR0_PFC1_U1ME_MASK 0x02000000 /* UART1 Mode Enable */
+#define SDR0_PFC1_U1ME_DSR_DTR 0x00000000 /* UART1 in DSR/DTR Mode */
+#define SDR0_PFC1_U1ME_CTS_RTS 0x02000000 /* UART1 in CTS/RTS Mode */
+
+#define SDR0_PFC1_SELECT_MASK 0x01C00000 /* Ethernet Pin Select EMAC 0 */
+#define SDR0_PFC1_SELECT_CONFIG_1_1 0x00C00000 /* 1xMII using RGMII bridge */
+#define SDR0_PFC1_SELECT_CONFIG_1_2 0x00000000 /* 1xMII using ZMII bridge */
+#define SDR0_PFC1_SELECT_CONFIG_2 0x00C00000 /* 1xGMII using RGMII bridge */
+#define SDR0_PFC1_SELECT_CONFIG_3 0x01000000 /* 1xTBI using RGMII bridge */
+#define SDR0_PFC1_SELECT_CONFIG_4 0x01400000 /* 2xRGMII using RGMII bridge */
+#define SDR0_PFC1_SELECT_CONFIG_5 0x01800000 /* 2xRTBI using RGMII bridge */
+#define SDR0_PFC1_SELECT_CONFIG_6 0x00800000 /* 2xSMII using ZMII bridge */
+
+#define SDR0_PFC1_U0ME_MASK 0x00080000 /* UART0 Mode Enable */
+#define SDR0_PFC1_U0ME_DSR_DTR 0x00000000 /* UART0 in DSR/DTR Mode */
+#define SDR0_PFC1_U0ME_CTS_RTS 0x00080000 /* UART0 in CTS/RTS Mode */
+#define SDR0_PFC1_U0IM_MASK 0x00040000 /* UART0 Interface Mode */
+#define SDR0_PFC1_U0IM_8PINS 0x00000000 /* UART0 Interface Mode 8 pins */
+#define SDR0_PFC1_U0IM_4PINS 0x00040000 /* UART0 Interface Mode 4 pins */
+#define SDR0_PFC1_SIS_MASK 0x00020000 /* SCP or IIC1 Selection */
+#define SDR0_PFC1_SIS_SCP_SEL 0x00000000 /* SCP Selected */
+#define SDR0_PFC1_SIS_IIC1_SEL 0x00020000 /* IIC1 Selected */
+#define SDR0_PFC1_UES_MASK 0x00010000 /* USB2D_RX_Active / EBC_Hold Req Selection */
+#define SDR0_PFC1_UES_USB2D_SEL 0x00000000 /* USB2D_RX_Active Selected */
+#define SDR0_PFC1_UES_EBCHR_SEL 0x00010000 /* EBC_Hold Req Selected */
+#define SDR0_PFC1_DIS_MASK 0x00008000 /* DMA_Req(1) / UIC_IRQ(5) Selection */
+#define SDR0_PFC1_DIS_DMAR_SEL 0x00000000 /* DMA_Req(1) Selected */
+#define SDR0_PFC1_DIS_UICIRQ5_SEL 0x00008000 /* UIC_IRQ(5) Selected */
+#define SDR0_PFC1_ERE_MASK 0x00004000 /* EBC Mast.Ext.Req.En./GPIO0(27) Selection */
+#define SDR0_PFC1_ERE_EXTR_SEL 0x00000000 /* EBC Mast.Ext.Req.En. Selected */
+#define SDR0_PFC1_ERE_GPIO0_27_SEL 0x00004000 /* GPIO0(27) Selected */
+#define SDR0_PFC1_UPR_MASK 0x00002000 /* USB2 Device Packet Reject Selection */
+#define SDR0_PFC1_UPR_DISABLE 0x00000000 /* USB2 Device Packet Reject Disable */
+#define SDR0_PFC1_UPR_ENABLE 0x00002000 /* USB2 Device Packet Reject Enable */
+
+#define SDR0_PFC1_PLB_PME_MASK 0x00001000 /* PLB3/PLB4 Perf. Monitor En. Selection */
+#define SDR0_PFC1_PLB_PME_PLB3_SEL 0x00000000 /* PLB3 Performance Monitor Enable */
+#define SDR0_PFC1_PLB_PME_PLB4_SEL 0x00001000 /* PLB3 Performance Monitor Enable */
+#define SDR0_PFC1_GFGGI_MASK 0x0000000F /* GPT Frequency Generation Gated In */
+
+/* Ethernet PLL Configuration Register */
+#define SDR0_PFC2 0x4102
+#define SDR0_PFC2_TUNE_MASK 0x01FF8000 /* Loop stability tuning bits */
+#define SDR0_PFC2_MULTI_MASK 0x00007C00 /* Frequency multiplication selector */
+#define SDR0_PFC2_RANGEB_MASK 0x00000380 /* PLLOUTB/C frequency selector */
+#define SDR0_PFC2_RANGEA_MASK 0x00000071 /* PLLOUTA frequency selector */
+
+#define SDR0_PFC2_SELECT_MASK 0xE0000000 /* Ethernet Pin select EMAC1 */
+#define SDR0_PFC2_SELECT_CONFIG_1_1 0x60000000 /* 1xMII using RGMII bridge */
+#define SDR0_PFC2_SELECT_CONFIG_1_2 0x00000000 /* 1xMII using ZMII bridge */
+#define SDR0_PFC2_SELECT_CONFIG_2 0x60000000 /* 1xGMII using RGMII bridge */
+#define SDR0_PFC2_SELECT_CONFIG_3 0x80000000 /* 1xTBI using RGMII bridge */
+#define SDR0_PFC2_SELECT_CONFIG_4 0xA0000000 /* 2xRGMII using RGMII bridge */
+#define SDR0_PFC2_SELECT_CONFIG_5 0xC0000000 /* 2xRTBI using RGMII bridge */
+#define SDR0_PFC2_SELECT_CONFIG_6 0x40000000 /* 2xSMII using ZMII bridge */
+
+/* USB2PHY0 Control Register */
+#define SDR0_USB2PHY0CR 0x4103
+#define SDR0_USB2PHY0CR_UTMICN_MASK 0x00100000 /* PHY UTMI interface connection */
+#define SDR0_USB2PHY0CR_UTMICN_DEV 0x00000000 /* Device support */
+#define SDR0_USB2PHY0CR_UTMICN_HOST 0x00100000 /* Host support */
+
+#define SDR0_USB2PHY0CR_DWNSTR_MASK 0x00400000 /* Select downstream port mode */
+#define SDR0_USB2PHY0CR_DWNSTR_DEV 0x00000000 /* Device */
+#define SDR0_USB2PHY0CR_DWNSTR_HOST 0x00400000 /* Host */
+
+#define SDR0_USB2PHY0CR_DVBUS_MASK 0x00800000 /* VBus detect (Device mode only) */
+#define SDR0_USB2PHY0CR_DVBUS_PURDIS 0x00000000 /* Pull-up resistance on D+ is disabled */
+#define SDR0_USB2PHY0CR_DVBUS_PUREN 0x00800000 /* Pull-up resistance on D+ is enabled */
+
+#define SDR0_USB2PHY0CR_WDINT_MASK 0x01000000 /* PHY UTMI data width and clock select */
+#define SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ 0x00000000 /* 8-bit data/60MHz */
+#define SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ 0x01000000 /* 16-bit data/30MHz */
+
+#define SDR0_USB2PHY0CR_LOOPEN_MASK 0x02000000 /* Loop back test enable */
+#define SDR0_USB2PHY0CR_LOOP_ENABLE 0x00000000 /* Loop back disabled */
+#define SDR0_USB2PHY0CR_LOOP_DISABLE 0x02000000 /* Loop back enabled (only test purposes) */
+
+#define SDR0_USB2PHY0CR_XOON_MASK 0x04000000 /* Force XO block on during a suspend */
+#define SDR0_USB2PHY0CR_XO_ON 0x00000000 /* PHY XO block is powered-on */
+#define SDR0_USB2PHY0CR_XO_OFF 0x04000000 /* PHY XO block is powered-off when all ports are suspended */
+
+#define SDR0_USB2PHY0CR_PWRSAV_MASK 0x08000000 /* Select PHY power-save mode */
+#define SDR0_USB2PHY0CR_PWRSAV_OFF 0x00000000 /* Non-power-save mode */
+#define SDR0_USB2PHY0CR_PWRSAV_ON 0x08000000 /* Power-save mode. Valid only for full-speed operation */
+
+#define SDR0_USB2PHY0CR_XOREF_MASK 0x10000000 /* Select reference clock source */
+#define SDR0_USB2PHY0CR_XOREF_INTERNAL 0x00000000 /* PHY PLL uses chip internal 48M clock as a reference */
+#define SDR0_USB2PHY0CR_XOREF_XO 0x10000000 /* PHY PLL uses internal XO block output as a reference */
+
+#define SDR0_USB2PHY0CR_XOCLK_MASK 0x20000000 /* Select clock for XO block */
+#define SDR0_USB2PHY0CR_XOCLK_EXTERNAL 0x00000000 /* PHY macro used an external clock */
+#define SDR0_USB2PHY0CR_XOCLK_CRYSTAL 0x20000000 /* PHY macro uses the clock from a crystal */
+
+#define SDR0_USB2PHY0CR_CLKSEL_MASK 0xc0000000 /* Select ref clk freq */
+#define SDR0_USB2PHY0CR_CLKSEL_12MHZ 0x00000000 /* Select ref clk freq = 12 MHz*/
+#define SDR0_USB2PHY0CR_CLKSEL_48MHZ 0x40000000 /* Select ref clk freq = 48 MHz*/
+#define SDR0_USB2PHY0CR_CLKSEL_24MHZ 0x80000000 /* Select ref clk freq = 24 MHz*/
+
+/* Miscealleneaous Function Reg. */
+#define SDR0_MFR 0x4300
+#define SDR0_MFR_ETH0_CLK_SEL_MASK 0x08000000 /* Ethernet0 Clock Select */
+#define SDR0_MFR_ETH0_CLK_SEL_EXT 0x00000000
+#define SDR0_MFR_ETH1_CLK_SEL_MASK 0x04000000 /* Ethernet1 Clock Select */
+#define SDR0_MFR_ETH1_CLK_SEL_EXT 0x00000000
+#define SDR0_MFR_ZMII_MODE_MASK 0x03000000 /* ZMII Mode Mask */
+#define SDR0_MFR_ZMII_MODE_MII 0x00000000 /* ZMII Mode MII */
+#define SDR0_MFR_ZMII_MODE_SMII 0x01000000 /* ZMII Mode SMII */
+#define SDR0_MFR_ZMII_MODE_BIT0 0x02000000 /* ZMII Mode Bit0 */
+#define SDR0_MFR_ZMII_MODE_BIT1 0x01000000 /* ZMII Mode Bit1 */
+#define SDR0_MFR_ZM_ENCODE(n) ((((unsigned long)(n))&0x3)<<24)
+#define SDR0_MFR_ZM_DECODE(n) ((((unsigned long)(n))<<24)&0x3)
+
+#define SDR0_MFR_ERRATA3_EN0 0x00800000
+#define SDR0_MFR_ERRATA3_EN1 0x00400000
+#define SDR0_MFR_PKT_REJ_MASK 0x00180000 /* Pkt Rej. Enable Mask */
+#define SDR0_MFR_PKT_REJ_EN 0x00180000 /* Pkt Rej. Enable on both EMAC3 0-1 */
+#define SDR0_MFR_PKT_REJ_EN0 0x00100000 /* Pkt Rej. Enable on EMAC3(0) */
+#define SDR0_MFR_PKT_REJ_EN1 0x00080000 /* Pkt Rej. Enable on EMAC3(1) */
+#define SDR0_MFR_PKT_REJ_POL 0x00200000 /* Packet Reject Polarity */
+
+#endif /* defined(CONFIG_440EPX) || defined(CONFIG_440GRX) */
+
/* CUST0 Customer Configuration Register0 */
#define SDR0_CUST0 0x4000
#define SDR0_CUST0_MUX_E_N_G_MASK 0xC0000000 /* Mux_Emac_NDFC_GPIO */
@@ -1007,27 +1243,18 @@
#define SDR0_PFC1_PLB_PME_PLB4_SEL 0x00001000 /* PLB3 Performance Monitor Enable */
#define SDR0_PFC1_GFGGI_MASK 0x0000000F /* GPT Frequency Generation Gated In */
-/* Miscealleneaous Function Reg. */
-#define SDR0_MFR 0x4300
-#define SDR0_MFR_ETH0_CLK_SEL 0x08000000 /* Ethernet0 Clock Select */
-#define SDR0_MFR_ETH1_CLK_SEL 0x04000000 /* Ethernet1 Clock Select */
-#define SDR0_MFR_ZMII_MODE_MASK 0x03000000 /* ZMII Mode Mask */
-#define SDR0_MFR_ZMII_MODE_MII 0x00000000 /* ZMII Mode MII */
-#define SDR0_MFR_ZMII_MODE_SMII 0x01000000 /* ZMII Mode SMII */
-#define SDR0_MFR_ZMII_MODE_RMII_10M 0x02000000 /* ZMII Mode RMII - 10 Mbs */
-#define SDR0_MFR_ZMII_MODE_RMII_100M 0x03000000 /* ZMII Mode RMII - 100 Mbs */
-#define SDR0_MFR_ZMII_MODE_BIT0 0x02000000 /* ZMII Mode Bit0 */
-#define SDR0_MFR_ZMII_MODE_BIT1 0x01000000 /* ZMII Mode Bit1 */
-#define SDR0_MFR_ZM_ENCODE(n) ((((unsigned long)(n))&0x3)<<24)
-#define SDR0_MFR_ZM_DECODE(n) ((((unsigned long)(n))<<24)&0x3)
-
-#define SDR0_MFR_ERRATA3_EN0 0x00800000
-#define SDR0_MFR_ERRATA3_EN1 0x00400000
-#define SDR0_MFR_PKT_REJ_MASK 0x00300000 /* Pkt Rej. Enable Mask */
-#define SDR0_MFR_PKT_REJ_EN 0x00300000 /* Pkt Rej. Enable on both EMAC3 0-1 */
-#define SDR0_MFR_PKT_REJ_EN0 0x00200000 /* Pkt Rej. Enable on EMAC3(0) */
-#define SDR0_MFR_PKT_REJ_EN1 0x00100000 /* Pkt Rej. Enable on EMAC3(1) */
-#define SDR0_MFR_PKT_REJ_POL 0x00080000 /* Packet Reject Polarity */
+/*-----------------------------------------------------------------------------
+ | Internal SRAM
+ +----------------------------------------------------------------------------*/
+#define ISRAM0_DCR_BASE 0x380
+#define isram0_sb0cr (ISRAM0_DCR_BASE+0x00) /* SRAM bank config 0*/
+#define isram0_bear (ISRAM0_DCR_BASE+0x04) /* SRAM bus error addr reg */
+#define isram0_besr0 (ISRAM0_DCR_BASE+0x05) /* SRAM bus error status reg 0 */
+#define isram0_besr1 (ISRAM0_DCR_BASE+0x06) /* SRAM bus error status reg 1 */
+#define isram0_pmeg (ISRAM0_DCR_BASE+0x07) /* SRAM power management */
+#define isram0_cid (ISRAM0_DCR_BASE+0x08) /* SRAM bus core id reg */
+#define isram0_revid (ISRAM0_DCR_BASE+0x09) /* SRAM bus revision id reg */
+#define isram0_dpc (ISRAM0_DCR_BASE+0x0a) /* SRAM data parity check reg */
#else
@@ -1121,7 +1348,7 @@
#define uic1vr (UIC1_DCR_BASE+0x7) /* UIC1 vector */
#define uic1vcr (UIC1_DCR_BASE+0x8) /* UIC1 vector configuration */
-#if defined(CONFIG_440SPE)
+#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#define UIC2_DCR_BASE 0xe0
#define uic2sr (UIC0_DCR_BASE+0x0) /* UIC2 status-Read Clear */
#define uic2srs (UIC0_DCR_BASE+0x1) /* UIC2 status-Read Set */
@@ -1423,6 +1650,46 @@
#define UIC_EIR6 0x00000004 /* External interrupt 6 */
#define UIC_UIC1NC 0x00000002 /* UIC1 non-critical interrupt */
#define UIC_UIC1C 0x00000001 /* UIC1 critical interrupt */
+
+#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+
+#define UIC_U0 0x80000000 /* UART 0 */
+#define UIC_U1 0x40000000 /* UART 1 */
+#define UIC_IIC0 0x20000000 /* IIC */
+#define UIC_KRD 0x10000000 /* Kasumi Ready for data */
+#define UIC_KDA 0x08000000 /* Kasumi Data Available */
+#define UIC_PCRW 0x04000000 /* PCI command register write */
+#define UIC_PPM 0x02000000 /* PCI power management */
+#define UIC_IIC1 0x01000000 /* IIC */
+#define UIC_SPI 0x00800000 /* SPI */
+#define UIC_EPCISER 0x00400000 /* External PCI SERR */
+#define UIC_MTE 0x00200000 /* MAL TXEOB */
+#define UIC_MRE 0x00100000 /* MAL RXEOB */
+#define UIC_D0 0x00080000 /* DMA channel 0 */
+#define UIC_D1 0x00040000 /* DMA channel 1 */
+#define UIC_D2 0x00020000 /* DMA channel 2 */
+#define UIC_D3 0x00010000 /* DMA channel 3 */
+#define UIC_UD0 0x00008000 /* UDMA irq 0 */
+#define UIC_UD1 0x00004000 /* UDMA irq 1 */
+#define UIC_UD2 0x00002000 /* UDMA irq 2 */
+#define UIC_UD3 0x00001000 /* UDMA irq 3 */
+#define UIC_HSB2D 0x00000800 /* USB2.0 Device */
+#define UIC_OHCI1 0x00000400 /* USB2.0 Host OHCI irq 1 */
+#define UIC_OHCI2 0x00000200 /* USB2.0 Host OHCI irq 2 */
+#define UIC_EIP94 0x00000100 /* Security EIP94 */
+#define UIC_ETH0 0x00000080 /* Emac 0 */
+#define UIC_ETH1 0x00000040 /* Emac 1 */
+#define UIC_EHCI 0x00000020 /* USB2.0 Host EHCI */
+#define UIC_EIR4 0x00000010 /* External interrupt 4 */
+#define UIC_UIC2NC 0x00000008 /* UIC2 non-critical interrupt */
+#define UIC_UIC2C 0x00000004 /* UIC2 critical interrupt */
+#define UIC_UIC1NC 0x00000002 /* UIC1 non-critical interrupt */
+#define UIC_UIC1C 0x00000001 /* UIC1 critical interrupt */
+
+/* For compatibility with 405 code */
+#define UIC_MAL_TXEOB UIC_MTE
+#define UIC_MAL_RXEOB UIC_MRE
+
#elif !defined(CONFIG_440SPE)
#define UIC_U0 0x80000000 /* UART 0 */
#define UIC_U1 0x40000000 /* UART 1 */
@@ -1531,6 +1798,48 @@
#define UIC_EWU0 0x00000004 /* Ethernet 0 wakeup */
#define UIC_ETH1 0x00000002 /* Ethernet 1 */
#define UIC_EWU1 0x00000001 /* Ethernet 1 wakeup */
+
+#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+
+#define UIC_MS 0x80000000 /* MAL SERR */
+#define UIC_MTDE 0x40000000 /* MAL TXDE */
+#define UIC_MRDE 0x20000000 /* MAL RXDE */
+#define UIC_U2 0x10000000 /* UART 2 */
+#define UIC_U3 0x08000000 /* UART 3 */
+#define UIC_EBCO 0x04000000 /* EBCO interrupt status */
+#define UIC_NDFC 0x02000000 /* NDFC */
+#define UIC_KSLE 0x01000000 /* KASUMI slave error */
+#define UIC_CT5 0x00800000 /* GPT compare timer 5 */
+#define UIC_CT6 0x00400000 /* GPT compare timer 6 */
+#define UIC_PLB34I0 0x00200000 /* PLB3X4X MIRQ0 */
+#define UIC_PLB34I1 0x00100000 /* PLB3X4X MIRQ1 */
+#define UIC_PLB34I2 0x00080000 /* PLB3X4X MIRQ2 */
+#define UIC_PLB34I3 0x00040000 /* PLB3X4X MIRQ3 */
+#define UIC_PLB34I4 0x00020000 /* PLB3X4X MIRQ4 */
+#define UIC_PLB34I5 0x00010000 /* PLB3X4X MIRQ5 */
+#define UIC_CT0 0x00008000 /* GPT compare timer 0 */
+#define UIC_CT1 0x00004000 /* GPT compare timer 1 */
+#define UIC_EIR7 0x00002000 /* External interrupt 7 */
+#define UIC_EIR8 0x00001000 /* External interrupt 8 */
+#define UIC_EIR9 0x00000800 /* External interrupt 9 */
+#define UIC_CT2 0x00000400 /* GPT compare timer 2 */
+#define UIC_CT3 0x00000200 /* GPT compare timer 3 */
+#define UIC_CT4 0x00000100 /* GPT compare timer 4 */
+#define UIC_SRE 0x00000080 /* Serial ROM error */
+#define UIC_GPTDC 0x00000040 /* GPT decrementer pulse */
+#define UIC_RSVD0 0x00000020 /* Reserved */
+#define UIC_EPCIPER 0x00000010 /* External PCI PERR */
+#define UIC_EIR0 0x00000008 /* External interrupt 0 */
+#define UIC_EWU0 0x00000004 /* Ethernet 0 wakeup */
+#define UIC_EIR1 0x00000002 /* External interrupt 1 */
+#define UIC_EWU1 0x00000001 /* Ethernet 1 wakeup */
+
+/* For compatibility with 405 code */
+#define UIC_MAL_SERR UIC_MS
+#define UIC_MAL_TXDE UIC_MTDE
+#define UIC_MAL_RXDE UIC_MRDE
+#define UIC_ENET UIC_ETH0
+
#elif !defined(CONFIG_440SPE)
#define UIC_MS 0x80000000 /* MAL SERR */
#define UIC_MTDE 0x40000000 /* MAL TXDE */
@@ -1608,6 +1917,20 @@
#define UIC_RSVD29 0x00000004 /* Reserved */
#define UIC_RSVD30 0x00000002 /* Reserved */
#define UIC_RSVD31 0x00000001 /* Reserved */
+
+#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* UIC2 */
+
+#define UIC_EIR5 0x80000000 /* External interrupt 5 */
+#define UIC_EIR6 0x40000000 /* External interrupt 6 */
+#define UIC_OPB 0x20000000 /* OPB to PLB bridge interrupt stat */
+#define UIC_EIR2 0x10000000 /* External interrupt 2 */
+#define UIC_EIR3 0x08000000 /* External interrupt 3 */
+#define UIC_DDR2 0x04000000 /* DDR2 sdram */
+#define UIC_MCTX0 0x02000000 /* MAl intp coalescence TX0 */
+#define UIC_MCTX1 0x01000000 /* MAl intp coalescence TX1 */
+#define UIC_MCTR0 0x00800000 /* MAl intp coalescence TR0 */
+#define UIC_MCTR1 0x00400000 /* MAl intp coalescence TR1 */
+
#endif /* CONFIG_440GX */
/*---------------------------------------------------------------------------+
@@ -1623,6 +1946,17 @@
#define UICB0_ALL (UICB0_UIC0CI | UICB0_UIC0NCI | UICB0_UIC1CI | \
UICB0_UIC1NCI | UICB0_UIC2CI | UICB0_UIC2NCI)
+
+#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+
+#define UICB0_UIC1CI 0x00000000 /* UIC1 Critical Interrupt */
+#define UICB0_UIC1NCI 0x00000000 /* UIC1 Noncritical Interrupt */
+#define UICB0_UIC2CI 0x00000000 /* UIC2 Critical Interrupt */
+#define UICB0_UIC2NCI 0x00000000 /* UIC2 Noncritical Interrupt */
+
+#define UICB0_ALL (UICB0_UIC1CI | UICB0_UIC1NCI | \
+ UICB0_UIC1CI | UICB0_UIC2NCI)
+
#endif /* CONFIG_440GX */
/*---------------------------------------------------------------------------+
| Universal interrupt controller interrupts
@@ -2262,7 +2596,8 @@
#define SDR0_SDSTP1_PAE_MASK (0x80000000 >> 13)
#define SDR0_SDSTP1_PISE_MASK (0x80000000 >> 15)
#endif /* defined(CONFIG_440GX) || defined(CONFIG_440SP) */
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#define SDR0_SDSTP1_PAE_MASK (0x80000000 >> 21)
#define SDR0_SDSTP1_PAME_MASK (0x80000000 >> 27)
#endif /* defined(CONFIG_440EP) || defined(CONFIG_440GR) */
@@ -2390,11 +2725,81 @@
#define SDR0_MFR_ZMII_MODE_BIT1 0x01000000 /* ZMII Mode Bit1 */
#define SDR0_MFR_ERRATA3_EN0 0x00800000
#define SDR0_MFR_ERRATA3_EN1 0x00400000
+#if defined(CONFIG_440GX) /* test-only: only 440GX or 440SPE??? */
#define SDR0_MFR_PKT_REJ_MASK 0x00300000 /* Pkt Rej. Enable Mask */
#define SDR0_MFR_PKT_REJ_EN 0x00300000 /* Pkt Rej. Enable on both EMAC3 0-1 */
#define SDR0_MFR_PKT_REJ_EN0 0x00200000 /* Pkt Rej. Enable on EMAC3(0) */
#define SDR0_MFR_PKT_REJ_EN1 0x00100000 /* Pkt Rej. Enable on EMAC3(1) */
#define SDR0_MFR_PKT_REJ_POL 0x00080000 /* Packet Reject Polarity */
+#endif
+
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#define SDR0_PFC1_EPS_ENCODE(n) ((((unsigned long)(n))&0x07)<<22)
+#define SDR0_PFC1_EPS_DECODE(n) ((((unsigned long)(n))>>22)&0x07)
+#define SDR0_PFC2_EPS_ENCODE(n) ((((unsigned long)(n))&0x07)<<29)
+#define SDR0_PFC2_EPS_DECODE(n) ((((unsigned long)(n))>>29)&0x07)
+#endif
+
+#define SDR0_MFR_ECS_MASK 0x10000000
+#define SDR0_MFR_ECS_INTERNAL 0x10000000
+
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#define SDR0_SRST0 0x200
+#define SDR0_SRST0_BGO 0x80000000 /* PLB to OPB bridge */
+#define SDR0_SRST0_PLB4 0x40000000 /* PLB4 arbiter */
+#define SDR0_SRST0_EBC 0x20000000 /* External bus controller */
+#define SDR0_SRST0_OPB 0x10000000 /* OPB arbiter */
+#define SDR0_SRST0_UART0 0x08000000 /* Universal asynchronous receiver/transmitter 0 */
+#define SDR0_SRST0_UART1 0x04000000 /* Universal asynchronous receiver/transmitter 1 */
+#define SDR0_SRST0_IIC0 0x02000000 /* Inter integrated circuit 0 */
+#define SDR0_SRST0_USB2H 0x01000000 /* USB2.0 Host */
+#define SDR0_SRST0_GPIO 0x00800000 /* General purpose I/O */
+#define SDR0_SRST0_GPT 0x00400000 /* General purpose timer */
+#define SDR0_SRST0_DMC 0x00200000 /* DDR SDRAM memory controller */
+#define SDR0_SRST0_PCI 0x00100000 /* PCI */
+#define SDR0_SRST0_EMAC0 0x00080000 /* Ethernet media access controller 0 */
+#define SDR0_SRST0_EMAC1 0x00040000 /* Ethernet media access controller 1 */
+#define SDR0_SRST0_CPM0 0x00020000 /* Clock and power management */
+#define SDR0_SRST0_ZMII 0x00010000 /* ZMII bridge */
+#define SDR0_SRST0_UIC0 0x00008000 /* Universal interrupt controller 0 */
+#define SDR0_SRST0_UIC1 0x00004000 /* Universal interrupt controller 1 */
+#define SDR0_SRST0_IIC1 0x00002000 /* Inter integrated circuit 1 */
+#define SDR0_SRST0_SCP 0x00001000 /* Serial communications port */
+#define SDR0_SRST0_BGI 0x00000800 /* OPB to PLB bridge */
+#define SDR0_SRST0_DMA 0x00000400 /* Direct memory access controller */
+#define SDR0_SRST0_DMAC 0x00000200 /* DMA channel */
+#define SDR0_SRST0_MAL 0x00000100 /* Media access layer */
+#define SDR0_SRST0_USB2D 0x00000080 /* USB2.0 device */
+#define SDR0_SRST0_GPTR 0x00000040 /* General purpose timer */
+#define SDR0_SRST0_P4P3 0x00000010 /* PLB4 to PLB3 bridge */
+#define SDR0_SRST0_P3P4 0x00000008 /* PLB3 to PLB4 bridge */
+#define SDR0_SRST0_PLB3 0x00000004 /* PLB3 arbiter */
+#define SDR0_SRST0_UART2 0x00000002 /* Universal asynchronous receiver/transmitter 2 */
+#define SDR0_SRST0_UART3 0x00000001 /* Universal asynchronous receiver/transmitter 3 */
+
+#define SDR0_SRST1 0x201
+#define SDR0_SRST1_NDFC 0x80000000 /* Nand flash controller */
+#define SDR0_SRST1_OPBA1 0x40000000 /* OPB Arbiter attached to PLB4 */
+#define SDR0_SRST1_P4OPB0 0x20000000 /* PLB4 to OPB Bridge0 */
+#define SDR0_SRST1_PLB42OPB0 SDR0_SRST1_P4OPB0
+#define SDR0_SRST1_DMA4 0x10000000 /* DMA to PLB4 */
+#define SDR0_SRST1_DMA4CH 0x08000000 /* DMA Channel to PLB4 */
+#define SDR0_SRST1_OPBA2 0x04000000 /* OPB Arbiter attached to PLB4 USB 2.0 Host */
+#define SDR0_SRST1_OPB2PLB40 0x02000000 /* OPB to PLB4 Bridge attached to USB 2.0 Host */
+#define SDR0_SRST1_PLB42OPB1 0x01000000 /* PLB4 to OPB Bridge attached to USB 2.0 Host */
+#define SDR0_SRST1_CPM1 0x00800000 /* Clock and Power management 1 */
+#define SDR0_SRST1_UIC2 0x00400000 /* Universal Interrupt Controller 2 */
+#define SDR0_SRST1_CRYP0 0x00200000 /* Security Engine */
+#define SDR0_SRST1_USB20PHY 0x00100000 /* USB 2.0 Phy */
+#define SDR0_SRST1_USB2HUTMI 0x00080000 /* USB 2.0 Host UTMI Interface */
+#define SDR0_SRST1_USB2HPHY 0x00040000 /* USB 2.0 Host Phy Interface */
+#define SDR0_SRST1_SRAM0 0x00020000 /* Internal SRAM Controller */
+#define SDR0_SRST1_RGMII0 0x00010000 /* RGMII Bridge */
+#define SDR0_SRST1_ETHPLL 0x00008000 /* Ethernet PLL */
+#define SDR0_SRST1_FPU 0x00004000 /* Floating Point Unit */
+#define SDR0_SRST1_KASU0 0x00002000 /* Kasumi Engine */
+
+#else
#define SDR0_SRST_BGO 0x80000000
#define SDR0_SRST_PLB 0x40000000
@@ -2427,10 +2832,15 @@
#define SDR0_SRST_EMAC3 0x00000008
#define SDR0_SRST_RGMII 0x00000001
+#endif
+
/*-----------------------------------------------------------------------------+
| Clocking
+-----------------------------------------------------------------------------*/
-#if !defined (CONFIG_440GX) && !defined(CONFIG_440EP) && !defined(CONFIG_440GR) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE)
+#if !defined (CONFIG_440GX) && \
+ !defined(CONFIG_440EP) && !defined(CONFIG_440GR) && \
+ !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) && \
+ !defined(CONFIG_440SP) && !defined(CONFIG_440SPE)
#define PLLSYS0_TUNE_MASK 0xffc00000 /* PLL TUNE bits */
#define PLLSYS0_FB_DIV_MASK 0x003c0000 /* Feedback divisor */
#define PLLSYS0_FWD_DIV_A_MASK 0x00038000 /* Forward divisor A */
@@ -2498,6 +2908,120 @@
#define PLLSYS1_NTO1_MASK 0x00000001 /* CPU:PLB N-to-1 ratio */
#endif /* CONFIG_440GX */
+#if defined (CONFIG_440EPX) || defined (CONFIG_440GRX)
+/*--------------------------------------*/
+#define CPR0_PLLC 0x40
+#define CPR0_PLLC_RST_MASK 0x80000000
+#define CPR0_PLLC_RST_PLLLOCKED 0x00000000
+#define CPR0_PLLC_RST_PLLRESET 0x80000000
+#define CPR0_PLLC_ENG_MASK 0x40000000
+#define CPR0_PLLC_ENG_DISABLE 0x00000000
+#define CPR0_PLLC_ENG_ENABLE 0x40000000
+#define CPR0_PLLC_ENG_ENCODE(n) ((((unsigned long)(n))&0x01)<<30)
+#define CPR0_PLLC_ENG_DECODE(n) ((((unsigned long)(n))>>30)&0x01)
+#define CPR0_PLLC_SRC_MASK 0x20000000
+#define CPR0_PLLC_SRC_PLLOUTA 0x00000000
+#define CPR0_PLLC_SRC_PLLOUTB 0x20000000
+#define CPR0_PLLC_SRC_ENCODE(n) ((((unsigned long)(n))&0x01)<<29)
+#define CPR0_PLLC_SRC_DECODE(n) ((((unsigned long)(n))>>29)&0x01)
+#define CPR0_PLLC_SEL_MASK 0x07000000
+#define CPR0_PLLC_SEL_PLL 0x00000000
+#define CPR0_PLLC_SEL_CPU 0x01000000
+#define CPR0_PLLC_SEL_PER 0x05000000
+#define CPR0_PLLC_SEL_ENCODE(n) ((((unsigned long)(n))&0x07)<<24)
+#define CPR0_PLLC_SEL_DECODE(n) ((((unsigned long)(n))>>24)&0x07)
+#define CPR0_PLLC_TUNE_MASK 0x000003FF
+#define CPR0_PLLC_TUNE_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0)
+#define CPR0_PLLC_TUNE_DECODE(n) ((((unsigned long)(n))>>0)&0x3FF)
+/*--------------------------------------*/
+#define CPR0_PLLD 0x60
+#define CPR0_PLLD_FBDV_MASK 0x1F000000
+#define CPR0_PLLD_FBDV_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
+#define CPR0_PLLD_FBDV_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x1F)+1)
+#define CPR0_PLLD_FWDVA_MASK 0x000F0000
+#define CPR0_PLLD_FWDVA_ENCODE(n) ((((unsigned long)(n))&0x0F)<<16)
+#define CPR0_PLLD_FWDVA_DECODE(n) ((((((unsigned long)(n))>>16)-1)&0x0F)+1)
+#define CPR0_PLLD_FWDVB_MASK 0x00000700
+#define CPR0_PLLD_FWDVB_ENCODE(n) ((((unsigned long)(n))&0x07)<<8)
+#define CPR0_PLLD_FWDVB_DECODE(n) ((((((unsigned long)(n))>>8)-1)&0x07)+1)
+#define CPR0_PLLD_LFBDV_MASK 0x0000003F
+#define CPR0_PLLD_LFBDV_ENCODE(n) ((((unsigned long)(n))&0x3F)<<0)
+#define CPR0_PLLD_LFBDV_DECODE(n) ((((((unsigned long)(n))>>0)-1)&0x3F)+1)
+/*--------------------------------------*/
+#define CPR0_PRIMAD 0x80
+#define CPR0_PRIMAD_PRADV0_MASK 0x07000000
+#define CPR0_PRIMAD_PRADV0_ENCODE(n) ((((unsigned long)(n))&0x07)<<24)
+#define CPR0_PRIMAD_PRADV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x07)+1)
+/*--------------------------------------*/
+#define CPR0_PRIMBD 0xA0
+#define CPR0_PRIMBD_PRBDV0_MASK 0x07000000
+#define CPR0_PRIMBD_PRBDV0_ENCODE(n) ((((unsigned long)(n))&0x07)<<24)
+#define CPR0_PRIMBD_PRBDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x07)+1)
+/*--------------------------------------*/
+#if 0
+#define CPR0_CPM0_ER 0xB0 /* CPM Enable Register */
+#define CPR0_CPM0_FR 0xB1 /* CPM Force Register */
+#define CPR0_CPM0_SR 0xB2 /* CPM Status Register */
+#define CPR0_CPM0_IIC0 0x80000000 /* Inter-Intergrated Circuit0 */
+#define CPR0_CPM0_IIC1 0x40000000 /* Inter-Intergrated Circuit1 */
+#define CPR0_CPM0_PCI 0x20000000 /* Peripheral Component Interconnect */
+#define CPR0_CPM0_USB1H 0x08000000 /* USB1.1 Host */
+#define CPR0_CPM0_FPU 0x04000000 /* PPC440 FPU */
+#define CPR0_CPM0_CPU 0x02000000 /* PPC440x5 Processor Core */
+#define CPR0_CPM0_DMA 0x01000000 /* Direct Memory Access Controller */
+#define CPR0_CPM0_BGO 0x00800000 /* PLB to OPB Bridge */
+#define CPR0_CPM0_BGI 0x00400000 /* OPB to PLB Bridge */
+#define CPR0_CPM0_EBC 0x00200000 /* External Bus Controller */
+#define CPR0_CPM0_NDFC 0x00100000 /* Nand Flash Controller */
+#define CPR0_CPM0_MADMAL 0x00080000 /* DDR SDRAM Controller or MADMAL ??? */
+#define CPR0_CPM0_DMC 0x00080000 /* DDR SDRAM Controller or MADMAL ??? */
+#define CPR0_CPM0_PLB4 0x00040000 /* PLB4 Arbiter */
+#define CPR0_CPM0_PLB4x3x 0x00020000 /* PLB4 to PLB3 */
+#define CPR0_CPM0_PLB3x4x 0x00010000 /* PLB3 to PLB4 */
+#define CPR0_CPM0_PLB3 0x00008000 /* PLB3 Arbiter */
+#define CPR0_CPM0_PPM 0x00002000 /* PLB Performance Monitor */
+#define CPR0_CPM0_UIC1 0x00001000 /* Universal Interrupt Controller 1 */
+#define CPR0_CPM0_GPIO 0x00000800 /* General Purpose IO */
+#define CPR0_CPM0_GPT 0x00000400 /* General Purpose Timer */
+#define CPR0_CPM0_UART0 0x00000200 /* Universal Asynchronous Rcver/Xmitter 0 */
+#define CPR0_CPM0_UART1 0x00000100 /* Universal Asynchronous Rcver/Xmitter 1 */
+#define CPR0_CPM0_UIC0 0x00000080 /* Universal Interrupt Controller 0 */
+#define CPR0_CPM0_TMRCLK 0x00000040 /* CPU Timer */
+#define CPR0_CPM0_EMC0 0x00000020 /* Ethernet 0 */
+#define CPR0_CPM0_EMC1 0x00000010 /* Ethernet 1 */
+#define CPR0_CPM0_UART2 0x00000008 /* Universal Asynchronous Rcver/Xmitter 2 */
+#define CPR0_CPM0_UART3 0x00000004 /* Universal Asynchronous Rcver/Xmitter 3 */
+#define CPR0_CPM0_USB2D 0x00000002 /* USB2.0 Device */
+#define CPR0_CPM0_USB2H 0x00000001 /* USB2.0 Host */
+#endif
+/*--------------------------------------*/
+#define CPR0_OPBD 0xC0
+#define CPR0_OPBD_OPBDV0_MASK 0x03000000
+#define CPR0_OPBD_OPBDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24)
+#define CPR0_OPBD_OPBDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x03)+1)
+/*--------------------------------------*/
+#define CPR0_PERD 0xE0
+#define CPR0_PERD_PERDV0_MASK 0x07000000
+#define CPR0_PERD_PERDV0_ENCODE(n) ((((unsigned long)(n))&0x07)<<24)
+#define CPR0_PERD_PERDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x07)+1)
+/*--------------------------------------*/
+#define CPR0_MALD 0x100
+#define CPR0_MALD_MALDV0_MASK 0x03000000
+#define CPR0_MALD_MALDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24)
+#define CPR0_MALD_MALDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x03)+1)
+/*--------------------------------------*/
+#define CPR0_SPCID 0x120
+#define CPR0_SPCID_SPCIDV0_MASK 0x03000000
+#define CPR0_SPCID_SPCIDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24)
+#define CPR0_SPCID_SPCIDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x03)+1)
+/*--------------------------------------*/
+#define CPR0_ICFG 0x140
+#define CPR0_ICFG_RLI_MASK 0x80000000
+#define CPR0_ICFG_RLI_RESETCPR 0x00000000
+#define CPR0_ICFG_RLI_PRESERVECPR 0x80000000
+#define CPR0_ICFG_ICS_MASK 0x00000007
+#endif /* defined (CONFIG_440EPX) || defined (CONFIG_440GRX) */
+
/*-----------------------------------------------------------------------------
| IIC Register Offsets
'----------------------------------------------------------------------------*/
@@ -2539,7 +3063,8 @@
#define PCIX0_CFGBASE (CFG_PCI_BASE + 0x0ec80000)
#define PCIX0_IOBASE (CFG_PCI_BASE + 0x08000000)
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
/* PCI Local Configuration Registers
--------------------------------- */
@@ -2625,6 +3150,33 @@
#endif /* !defined(CONFIG_440EP) !defined(CONFIG_440GR) */
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+
+/* USB2.0 Device */
+#define USB2D0_BASE CFG_USB2D0_BASE
+
+#define USB2D0_INTRIN (USB2D0_BASE + 0x00000000)
+
+#define USB2D0_INTRIN (USB2D0_BASE + 0x00000000) /* Interrupt register for Endpoint 0 plus IN Endpoints 1 to 3 */
+#define USB2D0_POWER (USB2D0_BASE + 0x00000000) /* Power management register */
+#define USB2D0_FADDR (USB2D0_BASE + 0x00000000) /* Function address register */
+#define USB2D0_INTRINE (USB2D0_BASE + 0x00000000) /* Interrupt enable register for USB2D0_INTRIN */
+#define USB2D0_INTROUT (USB2D0_BASE + 0x00000000) /* Interrupt register for OUT Endpoints 1 to 3 */
+#define USB2D0_INTRUSBE (USB2D0_BASE + 0x00000000) /* Interrupt enable register for USB2D0_INTRUSB */
+#define USB2D0_INTRUSB (USB2D0_BASE + 0x00000000) /* Interrupt register for common USB interrupts */
+#define USB2D0_INTROUTE (USB2D0_BASE + 0x00000000) /* Interrupt enable register for IntrOut */
+#define USB2D0_TSTMODE (USB2D0_BASE + 0x00000000) /* Enables the USB 2.0 test modes */
+#define USB2D0_INDEX (USB2D0_BASE + 0x00000000) /* Index register for selecting the Endpoint status/control registers */
+#define USB2D0_FRAME (USB2D0_BASE + 0x00000000) /* Frame number */
+#define USB2D0_INCSR0 (USB2D0_BASE + 0x00000000) /* Control Status register for Endpoint 0. (Index register set to select Endpoint 0) */
+#define USB2D0_INCSR (USB2D0_BASE + 0x00000000) /* Control Status register for IN Endpoint. (Index register set to select Endpoints 13) */
+#define USB2D0_INMAXP (USB2D0_BASE + 0x00000000) /* Maximum packet size for IN Endpoint. (Index register set to select Endpoints 13) */
+#define USB2D0_OUTCSR (USB2D0_BASE + 0x00000000) /* Control Status register for OUT Endpoint. (Index register set to select Endpoints 13) */
+#define USB2D0_OUTMAXP (USB2D0_BASE + 0x00000000) /* Maximum packet size for OUT Endpoint. (Index register set to select Endpoints 13) */
+#define USB2D0_OUTCOUNT0 (USB2D0_BASE + 0x00000000) /* Number of received bytes in Endpoint 0 FIFO. (Index register set to select Endpoint 0) */
+#define USB2D0_OUTCOUNT (USB2D0_BASE + 0x00000000) /* Number of bytes in OUT Endpoint FIFO. (Index register set to select Endpoints 13) */
+#endif
+
/******************************************************************************
* GPIO macro register defines
******************************************************************************/
@@ -2640,7 +3192,8 @@
#define GPIO0_IR (GPIO0_BASE+0x1C)
#endif /* CONFIG_440GP */
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#define GPIO0_BASE (CFG_PERIPHERAL_BASE+0x00000B00)
#define GPIO1_BASE (CFG_PERIPHERAL_BASE+0x00000C00)
diff --git a/include/ppc4xx_enet.h b/include/ppc4xx_enet.h
index ec2e362..43c5ca4 100644
--- a/include/ppc4xx_enet.h
+++ b/include/ppc4xx_enet.h
@@ -145,12 +145,14 @@ typedef struct emac_4xx_hw_st {
#define EMAC_STACR_OC_MASK (0x00000000)
#endif
-#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#define SDR0_PFC1_EM_1000 (0x00200000)
#endif
/*ZMII Bridge Register addresses */
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#define ZMII_BASE (CFG_PERIPHERAL_BASE + 0x0D00)
#else
#define ZMII_BASE (CFG_PERIPHERAL_BASE + 0x0780)
@@ -163,6 +165,7 @@ typedef struct emac_4xx_hw_st {
#define ZMII_MDI0 0x80000000
/* ZMII FER Register Bit Definitions */
+#define ZMII_FER_DIS (0x0)
#define ZMII_FER_MDI (0x8)
#define ZMII_FER_SMII (0x4)
#define ZMII_FER_RMII (0x2)
@@ -197,7 +200,11 @@ typedef struct emac_4xx_hw_st {
#define ZMII_SMIISR_V(__x) ((3 - __x) * 8)
/* RGMII Register Addresses */
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#define RGMII_BASE (CFG_PERIPHERAL_BASE + 0x1000)
+#else
#define RGMII_BASE (CFG_PERIPHERAL_BASE + 0x0790)
+#endif
#define RGMII_FER (RGMII_BASE + 0x00)
#define RGMII_SSR (RGMII_BASE + 0x04)
@@ -216,7 +223,11 @@ typedef struct emac_4xx_hw_st {
#define RGMII_SSR_SP_100MBPS (0x02)
#define RGMII_SSR_SP_1000MBPS (0x04)
+#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
+#define RGMII_SSR_V(__x) ((__x) * 8)
+#else
#define RGMII_SSR_V(__x) ((__x -2) * 8)
+#endif
/*---------------------------------------------------------------------------+
@@ -286,7 +297,8 @@ typedef struct emac_4xx_hw_st {
/* Ethernet MAC Regsiter Addresses */
#if defined(CONFIG_440)
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#define EMAC_BASE (CFG_PERIPHERAL_BASE + 0x0E00)
#else
#define EMAC_BASE (CFG_PERIPHERAL_BASE + 0x0800)
@@ -332,7 +344,9 @@ typedef struct emac_4xx_hw_st {
#define EMAC_M0_WKE (0x04000000)
/* on 440GX EMAC_MR1 has a different layout! */
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#if defined(CONFIG_440GX) || \
+ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+ defined(CONFIG_440SP) || defined(CONFIG_440SPE)
/* MODE Reg 1 */
#define EMAC_M1_FDE (0x80000000)
#define EMAC_M1_ILE (0x40000000)
diff --git a/include/ppc_asm.tmpl b/include/ppc_asm.tmpl
index 72d690e..3e47e82 100644
--- a/include/ppc_asm.tmpl
+++ b/include/ppc_asm.tmpl
@@ -312,7 +312,7 @@ label: \
lwz r3,GOT(transfer_to_handler); \
mtlr r3; \
addi r3,r1,STACK_FRAME_OVERHEAD; \
- li r20,MSR_KERNEL; \
+ li r20,(MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)); \
rlwimi r20,r23,0,25,25; \
blrl ; \
.L_ ## label : \
diff --git a/include/serial.h b/include/serial.h
index 8c7b1c2..4880059 100644
--- a/include/serial.h
+++ b/include/serial.h
@@ -26,6 +26,13 @@ extern struct serial_device * default_serial_console (void);
|| defined(CONFIG_405EP) || defined(CONFIG_MPC5xxx)
extern struct serial_device serial0_device;
extern struct serial_device serial1_device;
+#if defined(CFG_NS16550_SERIAL)
+extern struct serial_device eserial1_device;
+extern struct serial_device eserial2_device;
+extern struct serial_device eserial3_device;
+extern struct serial_device eserial4_device;
+#endif /* CFG_NS16550_SERIAL */
+
#endif
diff --git a/lib_arm/Makefile b/lib_arm/Makefile
index e56e06b..3e0a5c7 100644
--- a/lib_arm/Makefile
+++ b/lib_arm/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2002
+# (C) Copyright 2002-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,23 +23,24 @@
include $(TOPDIR)/config.mk
-LIB = lib$(ARCH).a
+LIB = $(obj)lib$(ARCH).a
-AOBJS = _ashldi3.o _ashrdi3.o _divsi3.o _modsi3.o _udivsi3.o _umodsi3.o
+SOBJS = _ashldi3.o _ashrdi3.o _divsi3.o _modsi3.o _udivsi3.o _umodsi3.o
COBJS = armlinux.o board.o \
cache.o div0.o
-OBJS = $(AOBJS) $(COBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-$(LIB): .depend $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/lib_blackfin/Makefile b/lib_blackfin/Makefile
index bc280d0..549c8c1 100644
--- a/lib_blackfin/Makefile
+++ b/lib_blackfin/Makefile
@@ -3,7 +3,7 @@
#
# Copyright (c) 2005 blackfin.uclinux.org
#
-# (C) Copyright 2000-2004
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -27,21 +27,23 @@
include $(TOPDIR)/config.mk
-LIB = lib$(ARCH).a
+LIB = $(obj)lib$(ARCH).a
-AOBJS =
+SOBJS =
COBJS = board.o bf533_linux.o bf533_string.o cache.o muldi3.o
-OBJS = $(AOBJS) $(COBJS)
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/lib_generic/Makefile b/lib_generic/Makefile
index 18c41b1..fcd43c6 100644
--- a/lib_generic/Makefile
+++ b/lib_generic/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2002
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,21 +23,24 @@
include $(TOPDIR)/config.mk
-LIB = libgeneric.a
+LIB = $(obj)libgeneric.a
-OBJS = bzlib.o bzlib_crctable.o bzlib_decompress.o \
+COBJS = bzlib.o bzlib_crctable.o bzlib_decompress.o \
bzlib_randtable.o bzlib_huffman.o \
crc32.o ctype.o display_options.o ldiv.o \
string.o vsprintf.o zlib.o
+
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
-$(LIB): .depend $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/lib_i386/Makefile b/lib_i386/Makefile
index e5925e5..8dc809e 100644
--- a/lib_i386/Makefile
+++ b/lib_i386/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2002
+# (C) Copyright 2002-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,23 +23,24 @@
include $(TOPDIR)/config.mk
-LIB = lib$(ARCH).a
+LIB = $(obj)lib$(ARCH).a
-AOBJS = bios.o bios_pci.o realmode_switch.o
+SOBJS = bios.o bios_pci.o realmode_switch.o
COBJS = board.o bios_setup.o i386_linux.o zimage.o realmode.o \
pci_type1.o pci.o video_bios.o video.o
-OBJS = $(AOBJS) $(COBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-$(LIB): .depend $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/lib_m68k/Makefile b/lib_m68k/Makefile
index 698da36..f9e8398 100644
--- a/lib_m68k/Makefile
+++ b/lib_m68k/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,20 +23,23 @@
include $(TOPDIR)/config.mk
-LIB = lib$(ARCH).a
+LIB = $(obj)lib$(ARCH).a
+
+SOBJS =
-AOBJS =
COBJS = cache.o traps.o time.o board.o m68k_linux.o
-OBJS = $(AOBJS) $(COBJS)
-$(LIB): .depend $(OBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/lib_microblaze/Makefile b/lib_microblaze/Makefile
index ec01722..35de97f 100644
--- a/lib_microblaze/Makefile
+++ b/lib_microblaze/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2003-2004
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,22 +23,23 @@
include $(TOPDIR)/config.mk
-LIB = lib$(ARCH).a
+LIB = $(obj)lib$(ARCH).a
-AOBJS =
+SOBJS =
COBJS = board.o microblaze_linux.o time.o cache.o
-OBJS = $(AOBJS) $(COBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-$(LIB): .depend $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/lib_mips/Makefile b/lib_mips/Makefile
index d5980e6..e2ac999 100644
--- a/lib_mips/Makefile
+++ b/lib_mips/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2003
+# (C) Copyright 2003-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,22 +23,23 @@
include $(TOPDIR)/config.mk
-LIB = lib$(ARCH).a
+LIB = $(obj)lib$(ARCH).a
-AOBJS =
+SOBJS =
COBJS = board.o time.o mips_linux.o
-OBJS = $(AOBJS) $(COBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-$(LIB): .depend $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/lib_nios/Makefile b/lib_nios/Makefile
index eff46db..ad4c6c4 100644
--- a/lib_nios/Makefile
+++ b/lib_nios/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,22 +23,23 @@
include $(TOPDIR)/config.mk
-LIB = lib$(ARCH).a
+LIB = $(obj)lib$(ARCH).a
-AOBJS =
+SOBJS =
COBJS = board.o cache.o divmod.o nios_linux.o mult.o time.o
-OBJS = $(AOBJS) $(COBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-$(LIB): .depend $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/lib_nios2/Makefile b/lib_nios2/Makefile
index 44b893c..1c2ac72 100644
--- a/lib_nios2/Makefile
+++ b/lib_nios2/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,22 +23,23 @@
include $(TOPDIR)/config.mk
-LIB = lib$(ARCH).a
+LIB = $(obj)lib$(ARCH).a
-AOBJS = cache.o
+SOBJS = cache.o
COBJS = board.o divmod.o nios_linux.o mult.o time.o
-OBJS = $(AOBJS) $(COBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-$(LIB): .depend $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/lib_ppc/Makefile b/lib_ppc/Makefile
index 652a419..bae8cbc 100644
--- a/lib_ppc/Makefile
+++ b/lib_ppc/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,23 +23,24 @@
include $(TOPDIR)/config.mk
-LIB = lib$(ARCH).a
+LIB = $(obj)lib$(ARCH).a
-AOBJS = ppcstring.o ticks.o
+SOBJS = ppcstring.o ticks.o
COBJS = board.o \
bat_rw.o cache.o extable.o kgdb.o time.o interrupts.o
-OBJS = $(AOBJS) $(COBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-$(LIB): .depend $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index db80f77..cf0e3fd 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -763,6 +763,12 @@ void board_init_r (gd_t *id, ulong dest_addr)
spi_init_r ();
#endif
+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+ WATCHDOG_RESET ();
+ puts ("NAND: ");
+ nand_init(); /* go init the NAND */
+#endif
+
/* relocate environment function pointers etc. */
env_relocate ();
@@ -959,12 +965,6 @@ void board_init_r (gd_t *id, ulong dest_addr)
doc_init ();
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_NAND)
- WATCHDOG_RESET ();
- puts ("NAND: ");
- nand_init(); /* go init the NAND */
-#endif
-
#if (CONFIG_COMMANDS & CFG_CMD_NET)
#if defined(CONFIG_NET_MULTI)
WATCHDOG_RESET ();
diff --git a/mkconfig b/mkconfig
index 4fe6e44..c3e4cea 100755
--- a/mkconfig
+++ b/mkconfig
@@ -5,7 +5,7 @@
#
# Parameters: Target Architecture CPU Board [VENDOR] [SOC]
#
-# (C) 2002 DENX Software Engineering, Wolfgang Denk <wd@denx.de>
+# (C) 2002-2006 DENX Software Engineering, Wolfgang Denk <wd@denx.de>
#
APPEND=no # Default: Create new config file
@@ -27,24 +27,38 @@ done
echo "Configuring for ${BOARD_NAME} board..."
-cd ./include
-
#
# Create link to architecture specific headers
#
-rm -f asm
-ln -s asm-$2 asm
+if [ "$SRCTREE" != "$OBJTREE" ] ; then
+ mkdir -p ${OBJTREE}/include
+ mkdir -p ${OBJTREE}/include2
+ cd ${OBJTREE}/include2
+ rm -f asm
+ ln -s ${SRCTREE}/include/asm-$2 asm
+ LNPREFIX="../../include2/asm/"
+ cd ../include
+ rm -rf asm-$2
+ rm -f asm
+ mkdir asm-$2
+ ln -s asm-$2 asm
+else
+ cd ./include
+ rm -f asm
+ ln -s asm-$2 asm
+fi
+
rm -f asm-$2/arch
if [ -z "$6" -o "$6" = "NULL" ] ; then
- ln -s arch-$3 asm-$2/arch
+ ln -s ${LNPREFIX}arch-$3 asm-$2/arch
else
- ln -s arch-$6 asm-$2/arch
+ ln -s ${LNPREFIX}arch-$6 asm-$2/arch
fi
if [ "$2" = "arm" ] ; then
rm -f asm-$2/proc
- ln -s proc-armv asm-$2/proc
+ ln -s ${LNPREFIX}proc-armv asm-$2/proc
fi
#
diff --git a/nand_spl/board/amcc/sequoia/Makefile b/nand_spl/board/amcc/sequoia/Makefile
new file mode 100644
index 0000000..897aa8b
--- /dev/null
+++ b/nand_spl/board/amcc/sequoia/Makefile
@@ -0,0 +1,83 @@
+#
+# (C) Copyright 2006
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+include board/$(BOARDDIR)/config.mk
+
+LDSCRIPT= board/$(BOARDDIR)/u-boot.lds
+LDFLAGS = -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS)
+AFLAGS += -DCONFIG_NAND_SPL
+CFLAGS += -DCONFIG_NAND_SPL
+
+SOBJS = start.o init.o resetvec.o
+COBJS = nand_boot.o ndfc.o sdram.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+
+ALL = u-boot-spl u-boot-spl.bin u-boot-spl-16k.bin
+
+all: $(obj).depend $(ALL)
+
+u-boot-spl-16k.bin: u-boot-spl
+ $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@
+
+u-boot-spl.bin: u-boot-spl
+ $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
+
+u-boot-spl: $(OBJS)
+ $(LD) $(LDFLAGS) $$UNDEF_SYM $(OBJS) \
+ -Map u-boot-spl.map -o u-boot-spl
+
+# create symbolic links for common files
+
+# from cpu directory
+ndfc.c:
+ @rm -f ndfc.c
+ ln -s ../cpu/ppc4xx/ndfc.c ndfc.c
+
+resetvec.S:
+ @rm -f resetvec.S
+ ln -s ../cpu/ppc4xx/resetvec.S resetvec.S
+
+start.S:
+ @rm -f start.S
+ ln -s ../cpu/ppc4xx/start.S start.S
+
+# from board directory
+init.S:
+ @rm -f init.S
+ ln -s ../board/amcc/sequoia/init.S init.S
+
+sdram.c:
+ @rm -f sdram.c
+ ln -s ../board/amcc/sequoia/sdram.c sdram.c
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/nand_spl/board/amcc/sequoia/config.mk b/nand_spl/board/amcc/sequoia/config.mk
new file mode 100644
index 0000000..a29ba5f
--- /dev/null
+++ b/nand_spl/board/amcc/sequoia/config.mk
@@ -0,0 +1,49 @@
+#
+# (C) Copyright 2006
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+#
+# AMCC 440EPx Reference Platform (Sequoia) board
+#
+
+#
+# TEXT_BASE for SPL:
+#
+# On 440EP(x) platforms the SPL is located at 0xfffff000...0xffffffff,
+# in the last 4kBytes of memory space in cache.
+# We will copy this SPL into internal SRAM in start.S. So we set
+# TEXT_BASE to starting address in internal SRAM here.
+#
+TEXT_BASE = 0xE0013000
+
+# PAD_TO used to generate a 16kByte binary needed for the combined image
+# -> PAD_TO = TEXT_BASE + 0x4000
+PAD_TO = 0xE0017000
+
+PLATFORM_CPPFLAGS += -DCONFIG_440=1
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
+
+ifeq ($(dbcr),1)
+PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+endif
diff --git a/nand_spl/board/amcc/sequoia/u-boot.lds b/nand_spl/board/amcc/sequoia/u-boot.lds
new file mode 100644
index 0000000..1563689
--- /dev/null
+++ b/nand_spl/board/amcc/sequoia/u-boot.lds
@@ -0,0 +1,65 @@
+/*
+ * (C) Copyright 2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc:common)
+SECTIONS
+{
+ .resetvec 0xE0013FFC :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ .text :
+ {
+ start.o (.text)
+ init.o (.text)
+ nand_boot.o (.text)
+ sdram.o (.text)
+ ndfc.o (.text)
+
+ *(.text)
+ *(.fixup)
+ }
+ _etext = .;
+
+ .data :
+ {
+ *(.rodata*)
+ *(.data*)
+ *(.sdata*)
+ __got2_start = .;
+ *(.got2)
+ __got2_end = .;
+ }
+
+ _edata = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss)
+ *(.bss)
+ }
+
+ _end = . ;
+}
diff --git a/nand_spl/nand_boot.c b/nand_spl/nand_boot.c
new file mode 100644
index 0000000..21abb09
--- /dev/null
+++ b/nand_spl/nand_boot.c
@@ -0,0 +1,177 @@
+/*
+ * (C) Copyright 2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <nand.h>
+
+#define CFG_NAND_READ_DELAY \
+ { volatile int dummy; int i; for (i=0; i<10000; i++) dummy = i; }
+
+extern void board_nand_init(struct nand_chip *nand);
+extern void ndfc_hwcontrol(struct mtd_info *mtdinfo, int cmd);
+extern void ndfc_write_byte(struct mtd_info *mtdinfo, u_char byte);
+extern u_char ndfc_read_byte(struct mtd_info *mtdinfo);
+extern int ndfc_dev_ready(struct mtd_info *mtdinfo);
+extern int jump_to_ram(ulong delta);
+extern int jump_to_uboot(ulong addr);
+
+static int nand_is_bad_block(struct mtd_info *mtd, int block)
+{
+ struct nand_chip *this = mtd->priv;
+ int page_addr = block * CFG_NAND_PAGE_COUNT;
+
+ /* Begin command latch cycle */
+ this->hwcontrol(mtd, NAND_CTL_SETCLE);
+ this->write_byte(mtd, NAND_CMD_READOOB);
+ /* Set ALE and clear CLE to start address cycle */
+ this->hwcontrol(mtd, NAND_CTL_CLRCLE);
+ this->hwcontrol(mtd, NAND_CTL_SETALE);
+ /* Column address */
+ this->write_byte(mtd, CFG_NAND_BAD_BLOCK_POS); /* A[7:0] */
+ this->write_byte(mtd, (uchar)(page_addr & 0xff)); /* A[16:9] */
+ this->write_byte(mtd, (uchar)((page_addr >> 8) & 0xff)); /* A[24:17] */
+#ifdef CFG_NAND_4_ADDR_CYCLE
+ /* One more address cycle for devices > 32MiB */
+ this->write_byte(mtd, (uchar)((page_addr >> 16) & 0x0f)); /* A[xx:25] */
+#endif
+ /* Latch in address */
+ this->hwcontrol(mtd, NAND_CTL_CLRALE);
+
+ /*
+ * Wait a while for the data to be ready
+ */
+ if (this->dev_ready)
+ this->dev_ready(mtd);
+ else
+ CFG_NAND_READ_DELAY;
+
+ /*
+ * Read on byte
+ */
+ if (this->read_byte(mtd) != 0xff)
+ return 1;
+
+ return 0;
+}
+
+static int nand_read_page(struct mtd_info *mtd, int block, int page, uchar *dst)
+{
+ struct nand_chip *this = mtd->priv;
+ int page_addr = page + block * CFG_NAND_PAGE_COUNT;
+ int i;
+
+ /* Begin command latch cycle */
+ this->hwcontrol(mtd, NAND_CTL_SETCLE);
+ this->write_byte(mtd, NAND_CMD_READ0);
+ /* Set ALE and clear CLE to start address cycle */
+ this->hwcontrol(mtd, NAND_CTL_CLRCLE);
+ this->hwcontrol(mtd, NAND_CTL_SETALE);
+ /* Column address */
+ this->write_byte(mtd, 0); /* A[7:0] */
+ this->write_byte(mtd, (uchar)(page_addr & 0xff)); /* A[16:9] */
+ this->write_byte(mtd, (uchar)((page_addr >> 8) & 0xff)); /* A[24:17] */
+#ifdef CFG_NAND_4_ADDR_CYCLE
+ /* One more address cycle for devices > 32MiB */
+ this->write_byte(mtd, (uchar)((page_addr >> 16) & 0x0f)); /* A[xx:25] */
+#endif
+ /* Latch in address */
+ this->hwcontrol(mtd, NAND_CTL_CLRALE);
+
+ /*
+ * Wait a while for the data to be ready
+ */
+ if (this->dev_ready)
+ this->dev_ready(mtd);
+ else
+ CFG_NAND_READ_DELAY;
+
+ /*
+ * Read page into buffer
+ */
+ for (i=0; i<CFG_NAND_PAGE_SIZE; i++)
+ *dst++ = this->read_byte(mtd);
+
+ return 0;
+}
+
+static int nand_load(struct mtd_info *mtd, int offs, int uboot_size, uchar *dst)
+{
+ int block;
+ int blockcopy_count;
+ int page;
+
+ /*
+ * offs has to be aligned to a block address!
+ */
+ block = offs / CFG_NAND_BLOCK_SIZE;
+ blockcopy_count = 0;
+
+ while (blockcopy_count < (uboot_size / CFG_NAND_BLOCK_SIZE)) {
+ if (!nand_is_bad_block(mtd, block)) {
+ /*
+ * Skip bad blocks
+ */
+ for (page = 0; page < CFG_NAND_PAGE_COUNT; page++) {
+ nand_read_page(mtd, block, page, dst);
+ dst += CFG_NAND_PAGE_SIZE;
+ }
+
+ blockcopy_count++;
+ }
+
+ block++;
+ }
+
+ return 0;
+}
+
+void nand_boot(void)
+{
+ ulong mem_size;
+ struct nand_chip nand_chip;
+ nand_info_t nand_info;
+ int ret;
+ void (*uboot)(void);
+
+ /*
+ * Init sdram, so we have access to memory
+ */
+ mem_size = initdram(0);
+
+ /*
+ * Init board specific nand support
+ */
+ nand_info.priv = &nand_chip;
+ nand_chip.IO_ADDR_R = nand_chip.IO_ADDR_W = (void __iomem *)CFG_NAND_BASE;
+ nand_chip.dev_ready = NULL; /* preset to NULL */
+ board_nand_init(&nand_chip);
+
+ /*
+ * Load U-Boot image from NAND into RAM
+ */
+ ret = nand_load(&nand_info, CFG_NAND_U_BOOT_OFFS, CFG_NAND_U_BOOT_SIZE,
+ (uchar *)CFG_NAND_U_BOOT_DST);
+
+ /*
+ * Jump to U-Boot image
+ */
+ uboot = (void (*)(void))CFG_NAND_U_BOOT_START;
+ (*uboot)();
+}
diff --git a/net/Makefile b/net/Makefile
index 7a70489..6fe4002 100644
--- a/net/Makefile
+++ b/net/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -25,19 +25,23 @@ include $(TOPDIR)/config.mk
# CFLAGS += -DET_DEBUG -DDEBUG
-LIB = libnet.a
+LIB = $(obj)libnet.a
+
+COBJS = net.o tftp.o bootp.o rarp.o eth.o nfs.o sntp.o
+
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
-OBJS = net.o tftp.o bootp.o rarp.o eth.o nfs.o sntp.o
all: $(LIB)
-$(LIB): $(START) $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/net/tftp.c b/net/tftp.c
index eca21d2..f3a5471 100644
--- a/net/tftp.c
+++ b/net/tftp.c
@@ -225,7 +225,7 @@ TftpHandler (uchar * pkt, unsigned dest, unsigned src, unsigned len)
if (TftpBlock == 0) {
TftpBlockWrap++;
TftpBlockWrapOffset += TFTP_BLOCK_SIZE * TFTP_SEQUENCE_SIZE;
- printf ("\n\t %lu MB reveived\n\t ", TftpBlockWrapOffset>>20);
+ printf ("\n\t %lu MB received\n\t ", TftpBlockWrapOffset>>20);
} else {
if (((TftpBlock - 1) % 10) == 0) {
putc ('#');
diff --git a/post/Makefile b/post/Makefile
index 4ee429d..228bafc 100644
--- a/post/Makefile
+++ b/post/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2002
+# (C) Copyright 2002-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
diff --git a/post/cpu/Makefile b/post/cpu/Makefile
index 43fc044..645e838 100644
--- a/post/cpu/Makefile
+++ b/post/cpu/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2002
+# (C) Copyright 2002-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
diff --git a/post/rules.mk b/post/rules.mk
index 1ad6959..a2f33ad 100644
--- a/post/rules.mk
+++ b/post/rules.mk
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2002
+# (C) Copyright 2002-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,20 +23,22 @@
include $(TOPDIR)/config.mk
-OBJS = $(AOBJS) $(COBJS)
+SRCS := $(AOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(AOBJS) $(COBJS))
+LIB := $(obj)$(LIB)
CPPFLAGS += -I$(TOPDIR)
all: $(LIB)
-$(LIB): .depend $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > .depend
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/rtc/Makefile b/rtc/Makefile
index 2c5d099..ca5b66b 100644
--- a/rtc/Makefile
+++ b/rtc/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2001-2004
+# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -25,24 +25,27 @@ include $(TOPDIR)/config.mk
#CFLAGS += -DDEBUG
-LIB = librtc.a
+LIB = $(obj)librtc.a
-OBJS = date.o \
+COBJS = date.o \
bf533_rtc.o ds12887.o ds1302.o ds1306.o ds1307.o \
ds1337.o ds1374.o ds1556.o ds164x.o ds174x.o \
m41t11.o max6900.o m48t35ax.o mc146818.o mk48t59.o \
mpc5xxx.o mpc8xx.o pcf8563.o s3c24x0_rtc.o rs5c372.o
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
all: $(LIB)
-$(LIB): $(START) $(OBJS)
+$(LIB): $(obj).depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/rules.mk b/rules.mk
new file mode 100644
index 0000000..a77451b
--- /dev/null
+++ b/rules.mk
@@ -0,0 +1,35 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#########################################################################
+
+_depend: $(obj).depend
+
+$(obj).depend: $(src)Makefile $(TOPDIR)/config.mk $(SRCS)
+ @rm -f $@
+ @for f in $(SRCS); do \
+ g=`basename $$f | sed -e 's/\(.*\)\.\w/\1.o/'`; \
+ $(CC) -M $(HOST_CFLAGS) $(CPPFLAGS) -MQ $(obj)$$g $$f >> $@ ; \
+ done
+
+#########################################################################
diff --git a/tools/Makefile b/tools/Makefile
index d3dcc7d..606f024 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2003
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -21,22 +21,23 @@
# MA 02111-1307 USA
#
-BINS = img2srec$(SFX) mkimage$(SFX) envcrc$(SFX) gen_eth_addr$(SFX) bmp_logo$(SFX)
+BIN_FILES = img2srec$(SFX) mkimage$(SFX) envcrc$(SFX) gen_eth_addr$(SFX) bmp_logo$(SFX)
-OBJS = environment.o img2srec.o mkimage.o crc32.o envcrc.o gen_eth_addr.o bmp_logo.o
+OBJ_LINKS = environment.o crc32.o
+OBJ_FILES = img2srec.o mkimage.o envcrc.o gen_eth_addr.o bmp_logo.o
ifeq ($(ARCH),mips)
-BINS += inca-swap-bytes$(SFX)
-OBJS += inca-swap-bytes.o
+BIN_FILES += inca-swap-bytes$(SFX)
+OBJ_FILES += inca-swap-bytes.o
endif
# Don't build by default
#ifeq ($(ARCH),ppc)
-#BINS += mpc86x_clk$(SFX)
-#OBJS += mpc86x_clk.o
+#BIN_FILES += mpc86x_clk$(SFX)
+#OBJ_FILES += mpc86x_clk.o
#endif
-LOGO_H = $(TOPDIR)/include/bmp_logo.h
+LOGO_H = $(OBJTREE)/include/bmp_logo.h
ifeq ($(LOGO_BMP),)
LOGO_BMP= logos/denx.bmp
@@ -106,69 +107,76 @@ endif
#
include $(TOPDIR)/config.mk
+# now $(obj) is defined
+SRCS := $(addprefix $(obj),$(OBJ_LINKS:.o=.c)) $(OBJ_FILES:.o=.c)
+BINS := $(addprefix $(obj),$(BIN_FILES))
+
#
# Use native tools and options
#
-CPPFLAGS = -idirafter ../include -DTEXT_BASE=$(TEXT_BASE) -DUSE_HOSTCC
+CPPFLAGS = -idirafter $(SRCTREE)/include \
+ -idirafter $(OBJTREE)/include2 \
+ -idirafter $(OBJTREE)/include \
+ -DTEXT_BASE=$(TEXT_BASE) -DUSE_HOSTCC
CFLAGS = $(HOST_CFLAGS) $(CPPFLAGS) -O
AFLAGS = -D__ASSEMBLY__ $(CPPFLAGS)
CC = $(HOSTCC)
STRIP = $(HOSTSTRIP)
MAKEDEPEND = makedepend
-all: .depend $(BINS) $(LOGO_H) subdirs
+all: $(obj).depend $(BINS) $(LOGO_H) subdirs
-envcrc$(SFX): envcrc.o crc32.o environment.o
+$(obj)envcrc$(SFX): $(obj)envcrc.o $(obj)crc32.o $(obj)environment.o
$(CC) $(CFLAGS) -o $@ $^
-img2srec$(SFX): img2srec.o
+$(obj)img2srec$(SFX): $(obj)img2srec.o
$(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^
$(STRIP) $@
-mkimage$(SFX): mkimage.o crc32.o
+$(obj)mkimage$(SFX): $(obj)mkimage.o $(obj)crc32.o
$(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^
$(STRIP) $@
-ncb$(SFX): ncb.o
+$(obj)ncb$(SFX): $(obj)ncb.o
$(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^
$(STRIP) $@
-gen_eth_addr$(SFX): gen_eth_addr.o
+$(obj)gen_eth_addr$(SFX): $(obj)gen_eth_addr.o
$(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^
$(STRIP) $@
-bmp_logo$(SFX): bmp_logo.o
+$(obj)bmp_logo$(SFX): $(obj)bmp_logo.o
$(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^
$(STRIP) $@
-inca-swap-bytes$(SFX): inca-swap-bytes.o
+$(obj)inca-swap-bytes$(SFX): $(obj)inca-swap-bytes.o
$(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^
$(STRIP) $@
-mpc86x_clk$(SFX): mpc86x_clk.o
+$(obj)mpc86x_clk$(SFX): $(obj)mpc86x_clk.o
$(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^
$(STRIP) $@
-envcrc.o: envcrc.c
- $(CC) -g $(CFLAGS) -c $<
+$(obj)envcrc.o: $(src)envcrc.c
+ $(CC) -g $(CFLAGS) -c -o $@ $<
-crc32.o: crc32.c
- $(CC) -g $(CFLAGS) -c $<
+$(obj)crc32.o: $(obj)crc32.c
+ $(CC) -g $(CFLAGS) -c -o $@ $<
-mkimage.o: mkimage.c
- $(CC) -g $(CFLAGS) -c $<
+$(obj)mkimage.o: $(src)mkimage.c
+ $(CC) -g $(CFLAGS) -c -o $@ $<
-ncb.o: ncb.c
- $(CC) -g $(CFLAGS) -c $<
+$(obj)ncb.o: $(src)ncb.c
+ $(CC) -g $(CFLAGS) -c -o $@ $<
-gen_eth_addr.o: gen_eth_addr.c
- $(CC) -g $(CFLAGS) -c $<
+$(obj)gen_eth_addr.o: $(src)gen_eth_addr.c
+ $(CC) -g $(CFLAGS) -c -o $@ $<
-inca-swap-bytes.o: inca-swap-bytes.c
- $(CC) -g $(CFLAGS) -c $<
+$(obj)inca-swap-bytes.o: $(src)inca-swap-bytes.c
+ $(CC) -g $(CFLAGS) -c -o $@ $<
-mpc86x_clk.o: mpc86x_clk.c
- $(CC) -g $(CFLAGS) -c $<
+$(obj)mpc86x_clk.o: $(src)mpc86x_clk.c
+ $(CC) -g $(CFLAGS) -c -o $@ $<
subdirs:
ifeq ($(TOOLSUBDIRS),)
@@ -184,25 +192,25 @@ else
done
endif
-environment.c:
- @rm -f environment.c
- ln -s ../common/environment.c environment.c
+$(obj)environment.c:
+ @rm -f $(obj)environment.c
+ ln -s $(src)../common/environment.c $(obj)environment.c
-environment.o: environment.c
- $(CC) -g $(HOST_ENVIRO_CFLAGS) $(CPPFLAGS) -c $<
+$(obj)environment.o: $(obj)environment.c
+ $(CC) -g $(HOST_ENVIRO_CFLAGS) $(CPPFLAGS) -c -o $@ $<
-crc32.c:
- @rm -f crc32.c
- ln -s ../lib_generic/crc32.c crc32.c
+$(obj)crc32.c:
+ @rm -f $(obj)crc32.c
+ ln -s $(src)../lib_generic/crc32.c $(obj)crc32.c
-$(LOGO_H): bmp_logo $(LOGO_BMP)
- ./bmp_logo $(LOGO_BMP) >$@
+$(LOGO_H): $(obj)bmp_logo $(LOGO_BMP)
+ $(obj)./bmp_logo $(LOGO_BMP) >$@
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(HOST_CFLAGS) $(CPPFLAGS) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/tools/easylogo/easylogo.c b/tools/easylogo/easylogo.c
index cbec70b..9f1d1ff 100644
--- a/tools/easylogo/easylogo.c
+++ b/tools/easylogo/easylogo.c
@@ -265,7 +265,7 @@ int image_save_header (image_t *image, char *filename, char *varname)
return -1 ;
/* Author information */
- fprintf(file, "/*\n * Generated by EasyLogo, (C) 2000 by Paolo Scaffardi\n/*\n"); */
+ fprintf(file, "/*\n * Generated by EasyLogo, (C) 2000 by Paolo Scaffardi\n *\n");
fprintf(file, " * To use this, include it and call: easylogo_plot(screen,&%s, width,x,y)\n *\n", varname);
fprintf(file, " * Where:\t'screen'\tis the pointer to the frame buffer\n");
fprintf(file, " *\t\t'width'\tis the screen width\n");
diff --git a/tools/env/Makefile b/tools/env/Makefile
index 9ce477c..1f16768 100644
--- a/tools/env/Makefile
+++ b/tools/env/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2002
+# (C) Copyright 2002-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -21,25 +21,28 @@
# MA 02111-1307 USA
#
-SOURCES := crc32.c fw_env.c fw_env_main.c
-HEADERS := fw_env.h
+include $(TOPDIR)/config.mk
-all: fw_printenv
+SRCS := $(obj)crc32.c fw_env.c fw_env_main.c
+HEADERS := fw_env.h
-fw_printenv: $(SOURCES) $(HEADERS)
- $(CROSS_COMPILE)gcc -Wall -DUSE_HOSTCC $(SOURCES) -o fw_printenv
+CPPFLAGS := -Wall -DUSE_HOSTCC
+
+all: $(obj)fw_printenv
+
+$(obj)fw_printenv: $(SRCS) $(HEADERS)
+ $(CROSS_COMPILE)gcc $(CPPFLAGS) $(SRCS) -o $(obj)fw_printenv
clean:
- rm -f fw_printenv crc32.c
+ rm -f $(obj)fw_printenv $(obj)crc32.c
-crc32.c:
- ln -s ../../lib_generic/crc32.c crc32.c
+$(obj)crc32.c:
+ ln -s $(src)../../lib_generic/crc32.c $(obj)crc32.c
#########################################################################
-.depend: Makefile $(SOURCES)
- $(CC) -M $(HOST_CFLAGS) $(CPPFLAGS) -DUSE_HOSTCC $(SOURCES) > $@
+include $(TOPDIR)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/tools/gdb/Makefile b/tools/gdb/Makefile
index e7618b7..dbcb91f 100644
--- a/tools/gdb/Makefile
+++ b/tools/gdb/Makefile
@@ -1,4 +1,7 @@
#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
# (C) Copyright 2000
# Murray Jensen <Murray.Jensen@csiro.au>
#
@@ -25,7 +28,11 @@ include $(TOPDIR)/config.mk
BINS = gdbsend gdbcont
-OBJS = gdbsend.o gdbcont.o error.o remote.o serial.o
+COBJS = gdbsend.o gdbcont.o error.o remote.o serial.o
+
+OBJS := $(addprefix $(obj),$(COBJS))
+SRCS := $(COBJS:.o=.c)
+BINS := $(addprefix $(obj),$(BINS))
#
# Use native tools and options
@@ -44,26 +51,26 @@ all:
else # ! CYGWIN
-all: $(BINS)
+all: $(obj).depend $(BINS)
-gdbsend: gdbsend.o error.o remote.o serial.o
+$(obj)gdbsend: $(obj)gdbsend.o $(obj)error.o $(obj)remote.o $(obj)serial.o
$(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^
-gdbcont: gdbcont.o error.o remote.o serial.o
+$(obj)gdbcont: $(obj)gdbcont.o $(obj)error.o $(obj)remote.o $(obj)serial.o
$(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^
clean:
rm -f $(OBJS)
distclean: clean
- rm -f $(BINS) core *.bak .depend
+ rm -f $(BINS) $(obj)core $(obj)*.bak $(obj).depend
#########################################################################
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) -I../include $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
--include .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/tools/mkimage.c b/tools/mkimage.c
index fea3e5b..60aac79 100644
--- a/tools/mkimage.c
+++ b/tools/mkimage.c
@@ -632,7 +632,7 @@ print_header (image_header_t *hdr)
if (hdr->ih_type == IH_TYPE_MULTI || hdr->ih_type == IH_TYPE_SCRIPT) {
int i, ptrs;
uint32_t pos;
- unsigned long *len_ptr = (unsigned long *) (
+ uint32_t *len_ptr = (uint32_t *) (
(unsigned long)hdr + sizeof(image_header_t)
);
diff --git a/tools/updater/Makefile b/tools/updater/Makefile
index 3fa1912..e9684cb 100644
--- a/tools/updater/Makefile
+++ b/tools/updater/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -25,62 +25,81 @@ LOAD_ADDR = 0x40000
include $(TOPDIR)/config.mk
-PROG = updater
-IMAGE = updater.image
-SRC = update.c flash.c flash_hw.c utils.c cmd_flash.c string.c ctype.c dummy.c
-ASRC = ppcstring.S
-OBJS = $(SRC:.c=.o) $(ASRC:.S=.o)
+PROG = $(obj)updater
+IMAGE = $(obj)updater.image
-LIB = $(TOPDIR)/examples/libstubs.a
-LIBAOBJS=
-LIBCOBJS= $(TOPDIR)/examples/stubs.o
-LIBOBJS = $(LIBAOBJS) $(LIBCOBJS)
+COBJS = update.o flash.o flash_hw.o utils.o cmd_flash.o string.o ctype.o dummy.o
+COBJS_LINKS = stubs.o
+AOBJS = ppcstring.o
+AOBJS_LINKS = memio.o
+
+OBJS := $(addprefix $(obj),$(COBJS) $(COBJS_LINKS) $(AOBJS) $(AOBJS_LINKS))
+SRCS := $(COBJS:.o=.c) $(AOBJS:.o=.S) $(addprefix $(obj), $(COBJS_LINKS:.o:.c) $(AOBJS_LINKS:.o:.S))
CPPFLAGS += -I$(TOPDIR) -I$(TOPDIR)/board/MAI/AmigaOneG3SE
CFLAGS += -I$(TOPDIR)/board/MAI/AmigaOneG3SE
+AFLAGS += -I$(TOPDIR)/board/MAI/AmigaOneG3SE
+
+DEPS = $(OBJTREE)/u-boot.bin $(OBJTREE)/tools/mkimage
+ifneq ($(DEPS),$(wildcard $(DEPS)))
+$(error "updater: Missing required objects, please run regular build first")
+endif
-all: .depend $(LIB) $(PROG)
+all: $(obj).depend $(PROG) $(IMAGE)
#########################################################################
-$(LIB): .depend $(LIBOBJS)
- $(AR) crv $@ $(LIBOBJS)
-%.srec: %.o $(LIB)
+$(obj)%.srec: %.o $(LIB)
$(LD) -g -Ttext $(LOAD_ADDR) -o $(<:.o=) -e $(<:.o=) $< $(LIB)
$(OBJCOPY) -O srec $(<:.o=) $@
-%.o: %.c
- $(CC) $(CPPFLAGS) -c $<
+$(obj)%.o: %.c
+ $(CC) $(CFLAGS) -c -o $@ $<
+
+$(obj)%.o: %.S
+ $(CC) $(AFLAGS) -c -o $@ $<
+
+$(obj)memio.o: $(obj)memio.S
+ $(CC) $(AFLAGS) -c -o $@ $<
-%.o: %.S
- $(CC) $(CPPFLAGS) -c $<
+$(obj)memio.S:
+ rm -f $(obj)memio.c
+ ln -s $(SRCTREE)/board/MAI/AmigaOneG3SE/memio.S $(obj)memio.S
+
+$(obj)stubs.o: $(obj)stubs.c
+ $(CC) $(CFLAGS) -c -o $@ $<
+
+$(obj)stubs.c:
+ rm -f $(obj)stubs.c
+ ln -s $(SRCTREE)/examples/stubs.c $(obj)stubs.c
#########################################################################
-updater: $(OBJS) $(LIB) $(TOPDIR)/board/MAI/AmigaOneG3SE/memio.o
- $(LD) -g -Ttext $(LOAD_ADDR) -o updater -e _main $(OBJS) $(LIB) \
- $(TOPDIR)/board/MAI/AmigaOneG3SE/memio.o
- $(OBJCOPY) -O binary updater updater.bin
+$(obj)updater: $(OBJS)
+ $(LD) -g -Ttext $(LOAD_ADDR) -o $(obj)updater -e _main $(OBJS)
+ $(OBJCOPY) -O binary $(obj)updater $(obj)updater.bin
-updater.image: updater $(TOPDIR)/u-boot.bin
- cat >/tmp/tempimage updater.bin junk $(TOPDIR)/u-boot.bin
- $(TOPDIR)/tools/mkimage -A ppc -O u-boot -T standalone -C none -a $(LOAD_ADDR) \
- -e `ppc-elf32-nm updater | grep _main | cut --bytes=0-8` \
- -n "Firmware Updater" -d /tmp/tempimage updater.image
+$(obj)updater.image: $(obj)updater $(OBJTREE)/u-boot.bin
+ cat >/tmp/tempimage $(obj)updater.bin junk $(OBJTREE)/u-boot.bin
+ $(OBJTREE)/tools/mkimage -A ppc -O u-boot -T standalone -C none -a $(LOAD_ADDR) \
+ -e `$(NM) $(obj)updater | grep _main | cut --bytes=0-8` \
+ -n "Firmware Updater" -d /tmp/tempimage $(obj)updater.image
rm /tmp/tempimage
- cp updater.image /tftpboot
+ cp $(obj)updater.image /tftpboot
-updater.image2: updater $(TOPDIR)/u-boot.bin
- cat >/tmp/tempimage updater.bin junk ../../create_image/image
- $(TOPDIR)/tools/mkimage -A ppc -O u-boot -T standalone -C none -a $(LOAD_ADDR) \
- -e `ppc-elf32-nm updater | grep _main | cut --bytes=0-8` \
- -n "Firmware Updater" -d /tmp/tempimage updater.image
+(obj)updater.image2: $(obj)updater $(OBJTREE)/u-boot.bin
+ cat >/tmp/tempimage $(obj)updater.bin junk ../../create_image/image
+ $(OBJTREE)/tools/mkimage -A ppc -O u-boot -T standalone -C none -a $(LOAD_ADDR) \
+ -e `$(NM) $(obj)updater | grep _main | cut --bytes=0-8` \
+ -n "Firmware Updater" -d /tmp/tempimage $(obj)updater.image
rm /tmp/tempimage
- cp updater.image /tftpboot
+ cp $(obj)updater.image /tftpboot
+
+#########################################################################
-.depend: Makefile $(SRC) $(ASRC) $(LIBCOBJS:.o=.c) $(LIBAOBJS:.o=.S)
- $(CC) -M $(CFLAGS) $(SRC) $(ASRC) $(LIBCOBJS:.o=.c) $(LIBAOBJS:.o=.S) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/tools/updater/flash.c b/tools/updater/flash.c
index 32a1767..1ed77b1 100644
--- a/tools/updater/flash.c
+++ b/tools/updater/flash.c
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2006
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
@@ -124,7 +124,7 @@ addr2info (ulong addr)
* (only some targets require alignment)
*/
int
-flash_write (uchar *src, ulong addr, ulong cnt)
+flash_write (char *src, ulong addr, ulong cnt)
{
#ifdef CONFIG_SPD823TS
return (ERR_TIMOUT); /* any other error codes are possible as well */
diff --git a/tools/updater/update.c b/tools/updater/update.c
index b6d50d5..18f122a 100644
--- a/tools/updater/update.c
+++ b/tools/updater/update.c
@@ -46,10 +46,6 @@ void _main(void)
while (1);
}
-int flash_sect_protect (int p, ulong addr_first, ulong addr_last);
-int flash_sect_erase (ulong addr_first, ulong addr_last);
-int flash_write (uchar *src, ulong addr, ulong cnt);
-
void do_updater(void)
{
unsigned long *addr = &__dummy + 65;