diff options
52 files changed, 3027 insertions, 2152 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 17b2f9c..8244b51 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -135,6 +135,7 @@ Jon Diekema <jon.diekema@smiths-aerospace.com> Dirk Eibach <eibach@gdsys.de> + dlvision PPC405EP gdppc440etx PPC440EP/GR neo PPC405EP @@ -171,6 +172,7 @@ Matthias Fuchs <matthias.fuchs@esd-electronics.com> PCI405 PPC405GP PLU405 PPC405EP PMC405 PPC405GP + PMC405DE PPC405EP PMC440 PPC440EPx VOH405 PPC405EP VOM405 PPC405EP @@ -381,7 +383,6 @@ Travis Sawyer (travis.sawyer@sandburst.com> KAREF PPC440GX METROBOX PPC440GX - XPEDITE1K PPC440GX Georg Schardt <schardt@team-ctech.de> @@ -436,6 +437,7 @@ Rune Torgersen <runet@innovsys.com> Peter Tyser <ptyser@xes-inc.com> + XPEDITE1000 PPC440GX XPEDITE5170 MPC8640 XPEDITE5200 MPC8548 XPEDITE5370 MPC8572 @@ -194,6 +194,7 @@ LIST_4xx=" \ csb272 \ csb472 \ DASA_SIM \ + dlvision \ DP405 \ DU405 \ DU440 \ @@ -237,6 +238,7 @@ LIST_4xx=" \ PIP405 \ PLU405 \ PMC405 \ + PMC405DE \ PMC440 \ PPChameleonEVB \ quad100hd \ @@ -258,7 +260,7 @@ LIST_4xx=" \ WUH405 \ xilinx-ppc440-generic \ xilinx-ppc440-generic_flash \ - XPEDITE1K \ + XPEDITE1000 \ yellowstone \ yosemite \ yucca \ @@ -1297,6 +1297,9 @@ csb472_config: unconfig DASA_SIM_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx dasa_sim esd +dlvision_config: unconfig + @$(MKCONFIG) $(@:_config=) ppc ppc4xx dlvision gdsys + DP405_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx dp405 esd @@ -1456,6 +1459,9 @@ PLU405_config: unconfig PMC405_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405 esd +PMC405DE_config: unconfig + @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405de esd + PMC440_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc440 esd @@ -1604,8 +1610,8 @@ xilinx-ppc440-generic_config: unconfig >> $(obj)board/xilinx/ppc440-generic/config.tmp @$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx -XPEDITE1K_config: unconfig - @$(MKCONFIG) $(@:_config=) ppc ppc4xx xpedite1k +XPEDITE1000_config: unconfig + @$(MKCONFIG) $(@:_config=) ppc ppc4xx xpedite1000 xes yosemite_config \ yellowstone_config: unconfig diff --git a/board/amcc/canyonlands/Makefile b/board/amcc/canyonlands/Makefile index 2aeead6..12f8a64 100644 --- a/board/amcc/canyonlands/Makefile +++ b/board/amcc/canyonlands/Makefile @@ -25,10 +25,11 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS := $(BOARD).o -COBJS += bootstrap.o +COBJS-y := $(BOARD).o +COBJS-$(CONFIG_CMD_CHIP_CONFIG) += chip_config.o SOBJS := init.o +COBJS := $(COBJS-y) SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) diff --git a/board/amcc/canyonlands/bootstrap.c b/board/amcc/canyonlands/bootstrap.c deleted file mode 100644 index 6dc2cca..0000000 --- a/board/amcc/canyonlands/bootstrap.c +++ /dev/null @@ -1,195 +0,0 @@ -/* - * (C) Copyright 2008 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - */ - -#include <common.h> -#include <command.h> -#include <i2c.h> -#include <asm/io.h> - -/* - * NOR and NAND boot options change bytes 5, 6, 8, 9, 11. The - * values are independent of the rest of the clock settings. - */ - -#define NAND_COMPATIBLE 0x01 -#define NOR_COMPATIBLE 0x02 - -#define I2C_EEPROM_ADDR 0x52 - -static char *config_labels[] = { - "CPU: 600 PLB: 200 OPB: 100 EBC: 100", - "CPU: 800 PLB: 200 OPB: 100 EBC: 100", - "CPU:1000 PLB: 200 OPB: 100 EBC: 100", - "CPU:1066 PLB: 266 OPB: 88 EBC: 88", - NULL -}; - -static u8 boot_configs[][17] = { - { - (NAND_COMPATIBLE | NOR_COMPATIBLE), - 0x86, 0x80, 0xce, 0x1f, 0x79, 0x80, 0x00, 0xa0, 0x40, 0x08, - 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 - }, - { - (NAND_COMPATIBLE | NOR_COMPATIBLE), - 0x86, 0x80, 0xba, 0x14, 0x99, 0x80, 0x00, 0xa0, 0x40, 0x08, - 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 - }, - { - (NAND_COMPATIBLE | NOR_COMPATIBLE), - 0x86, 0x82, 0x96, 0x19, 0xb9, 0x80, 0x00, 0xa0, 0x40, 0x08, - 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 - }, - { - (NAND_COMPATIBLE | NOR_COMPATIBLE), - 0x86, 0x80, 0xb3, 0x01, 0x9d, 0x80, 0x00, 0xa0, 0x40, 0x08, - 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 - }, - { - 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 - } -}; - -/* - * Bytes 5,6,8,9,11 change for NAND boot - */ -#if 0 -/* - * Values for 512 page size NAND chips, not used anymore, just - * keep them here for reference - */ -static u8 nand_boot[] = { - 0x90, 0x01, 0xa0, 0x68, 0x58 -}; -#else -/* - * Values for 2k page size NAND chips - */ -static u8 nand_boot[] = { - 0x90, 0x01, 0xa0, 0xe8, 0x58 -}; -#endif - -static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) -{ - u8 *buf, b_nand; - int x, y, nbytes, selcfg; - extern char console_buffer[]; - - if (argc < 2) { - cmd_usage(cmdtp); - return 1; - } - - if ((strcmp(argv[1], "nor") != 0) && - (strcmp(argv[1], "nand") != 0)) { - printf("Unsupported boot-device - only nor|nand support\n"); - return 1; - } - - /* set the nand flag based on provided input */ - if ((strcmp(argv[1], "nand") == 0)) - b_nand = 1; - else - b_nand = 0; - - printf("Available configurations: \n\n"); - - if (b_nand) { - for(x = 0, y = 0; boot_configs[x][0] != 0; x++) { - /* filter on nand compatible */ - if (boot_configs[x][0] & NAND_COMPATIBLE) { - printf(" %d - %s\n", (y+1), config_labels[x]); - y++; - } - } - } else { - for(x = 0, y = 0; boot_configs[x][0] != 0; x++) { - /* filter on nor compatible */ - if (boot_configs[x][0] & NOR_COMPATIBLE) { - printf(" %d - %s\n", (y+1), config_labels[x]); - y++; - } - } - } - - do { - nbytes = readline(" Selection [1-x / quit]: "); - - if (nbytes) { - if (strcmp(console_buffer, "quit") == 0) - return 0; - selcfg = simple_strtol(console_buffer, NULL, 10); - if ((selcfg < 1) || (selcfg > y)) - nbytes = 0; - } - } while (nbytes == 0); - - - y = (selcfg - 1); - - for (x = 0; boot_configs[x][0] != 0; x++) { - if (b_nand) { - if (boot_configs[x][0] & NAND_COMPATIBLE) { - if (y > 0) - y--; - else if (y < 1) - break; - } - } else { - if (boot_configs[x][0] & NOR_COMPATIBLE) { - if (y > 0) - y--; - else if (y < 1) - break; - } - } - } - - buf = &boot_configs[x][1]; - - if (b_nand) { - buf[5] = nand_boot[0]; - buf[6] = nand_boot[1]; - buf[8] = nand_boot[2]; - buf[9] = nand_boot[3]; - buf[11] = nand_boot[4]; - } - - if (i2c_write(I2C_EEPROM_ADDR, 0, 1, buf, 16) != 0) - printf("Error writing to EEPROM at address 0x%x\n", I2C_EEPROM_ADDR); - udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000); - - printf("Done\n"); - printf("Please power-cycle the board for the changes to take effect\n"); - - return 0; -} - -U_BOOT_CMD( - bootstrap, 2, 0, do_bootstrap, - "program the I2C bootstrap EEPROM", - "<nand|nor> - strap to boot from NAND or NOR flash" -); diff --git a/board/amcc/canyonlands/chip_config.c b/board/amcc/canyonlands/chip_config.c new file mode 100644 index 0000000..e46f4d8 --- /dev/null +++ b/board/amcc/canyonlands/chip_config.c @@ -0,0 +1,87 @@ +/* + * (C) Copyright 2008-2009 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include <common.h> +#include <asm/ppc4xx_config.h> + +struct ppc4xx_config ppc4xx_config_val[] = { + { + "600-nor", "NOR CPU: 600 PLB: 200 OPB: 100 EBC: 100", + { + 0x86, 0x80, 0xce, 0x1f, 0x79, 0x80, 0x00, 0xa0, + 0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 + } + }, + { + "600-nand", "NAND CPU: 600 PLB: 200 OPB: 100 EBC: 100", + { + 0x86, 0x80, 0xce, 0x1f, 0x79, 0x90, 0x01, 0xa0, + 0xa0, 0xe8, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00 + } + }, + { + "800-nor", "NOR CPU: 800 PLB: 200 OPB: 100 EBC: 100", + { + 0x86, 0x80, 0xba, 0x14, 0x99, 0x80, 0x00, 0xa0, + 0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 + } + }, + { + "800-nand", "NAND CPU: 800 PLB: 200 OPB: 100 EBC: 100", + { + 0x86, 0x80, 0xba, 0x14, 0x99, 0x90, 0x01, 0xa0, + 0xa0, 0xe8, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00 + } + }, + { + "1000-nor", "NOR CPU:1000 PLB: 200 OPB: 100 EBC: 100", + { + 0x86, 0x82, 0x96, 0x19, 0xb9, 0x80, 0x00, 0xa0, + 0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 + } + }, + { + "1000-nand", "NAND CPU:1000 PLB: 200 OPB: 100 EBC: 100", + { + 0x86, 0x82, 0x96, 0x19, 0xb9, 0x90, 0x01, 0xa0, + 0xa0, 0xe8, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00 + } + }, + { + "1066-nor", "NOR CPU:1066 PLB: 266 OPB: 88 EBC: 88", + { + 0x86, 0x80, 0xb3, 0x01, 0x9d, 0x80, 0x00, 0xa0, + 0x40, 0x08, 0x23, 0x50, 0x0d, 0x05, 0x00, 0x00 + } + }, + { + "1066-nand", "NAND CPU:1066 PLB: 266 OPB: 88 EBC: 88", + { + 0x86, 0x80, 0xb3, 0x01, 0x9d, 0x90, 0x01, 0xa0, + 0xa0, 0xe8, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00 + } + }, +}; + +int ppc4xx_config_count = ARRAY_SIZE(ppc4xx_config_val); diff --git a/board/amcc/kilauea/Makefile b/board/amcc/kilauea/Makefile index df0a68f..751e9f3 100644 --- a/board/amcc/kilauea/Makefile +++ b/board/amcc/kilauea/Makefile @@ -25,8 +25,10 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o cmd_pll.o +COBJS-y := $(BOARD).o +COBJS-$(CONFIG_CMD_CHIP_CONFIG) += chip_config.o +COBJS := $(COBJS-y) SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) diff --git a/board/amcc/kilauea/chip_config.c b/board/amcc/kilauea/chip_config.c new file mode 100644 index 0000000..9a3fc15 --- /dev/null +++ b/board/amcc/kilauea/chip_config.c @@ -0,0 +1,73 @@ +/* + * (C) Copyright 2009 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include <common.h> +#include <asm/ppc4xx_config.h> + +struct ppc4xx_config ppc4xx_config_val[] = { + { + "333-nor","NOR CPU: 333 PLB: 166 OPB: 83 EBC: 83", + { + 0x8c, 0x12, 0xec, 0x12, 0x98, 0x00, 0x0a, 0x00, + 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00 + } + }, + { + "400-133-nor", "NOR CPU: 400 PLB: 133 OPB: 66 EBC: 66", + { + 0x8e, 0x0e, 0xe8, 0x13, 0x98, 0x00, 0x0a, 0x00, + 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00 + } + }, + { + "400-nor", "NOR CPU: 400 PLB: 200 OPB: 100 EBC: 100", + { + 0x8e, 0x0e, 0xe8, 0x12, 0x98, 0x00, 0x0a, 0x00, + 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00 + } + }, + { + "533-nor", "NOR CPU: 533 PLB: 177 OPB: 88 EBC: 88", + { + 0x8e, 0x43, 0x60, 0x13, 0x98, 0x00, 0x0a, 0x00, + 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00 + } + }, + { + "600-nor", "NOR CPU: 600 PLB: 200 OPB: 100 EBC: 100", + { + 0x8d, 0x02, 0x34, 0x13, 0x98, 0x00, 0x0a, 0x00, + 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00 + } + }, + { + "666-nor", "NOR CPU: 666 PLB: 222 OPB: 111 EBC: 111", + { + 0x8d, 0x03, 0x78, 0x13, 0x98, 0x00, 0x0a, 0x00, + 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00 + } + }, +}; + +int ppc4xx_config_count = ARRAY_SIZE(ppc4xx_config_val); diff --git a/board/amcc/kilauea/cmd_pll.c b/board/amcc/kilauea/cmd_pll.c deleted file mode 100644 index 9bae67e..0000000 --- a/board/amcc/kilauea/cmd_pll.c +++ /dev/null @@ -1,297 +0,0 @@ -/* - * (C) Copyright 2000, 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - */ - -/* - * ehnus: change pll frequency. - * Wed Sep 5 11:45:17 CST 2007 - * hsun@udtech.com.cn - */ - - -#include <common.h> -#include <config.h> -#include <command.h> -#include <i2c.h> - -#ifdef CONFIG_CMD_EEPROM - -#define EEPROM_CONF_OFFSET 0 -#define EEPROM_TEST_OFFSET 16 -#define EEPROM_SDSTP_PARAM 16 - -#define PLL_NAME_MAX 12 -#define BUF_STEP 8 - -/* eeprom_wirtes 8Byte per op. */ -#define EEPROM_ALTER_FREQ(freq) \ - do { \ - int __i; \ - for (__i = 0; __i < 2; __i++) \ - eeprom_write (CONFIG_SYS_I2C_EEPROM_ADDR, \ - EEPROM_CONF_OFFSET + __i*BUF_STEP, \ - pll_select[freq], \ - BUF_STEP + __i*BUF_STEP); \ - } while (0) - -#define PDEBUG -#ifdef PDEBUG -#define PLL_DEBUG pll_debug(EEPROM_CONF_OFFSET) -#else -#define PLL_DEBUG -#endif - -typedef enum { - PLL_ebc20, - PLL_333, - PLL_4001, - PLL_4002, - PLL_533, - PLL_600, - PLL_666, /* For now, kilauea can't support */ - RCONF, - WTEST, - PLL_TOTAL -} pll_freq_t; - -static const char -pll_name[][PLL_NAME_MAX] = { - "PLL_ebc20", - "PLL_333", - "PLL_400@1", - "PLL_400@2", - "PLL_533", - "PLL_600", - "PLL_666", - "RCONF", - "WTEST", - "" -}; - -/* - * ehnus: - */ -static uchar -pll_select[][EEPROM_SDSTP_PARAM] = { - /* 0: CPU 333MHz EBC 20MHz, for test only */ - { - 0x8c, 0x12, 0xec, 0x12, 0x88, 0x00, 0x0a, 0x00, - 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00 - }, - - /* 0: 333 */ - { - 0x8c, 0x12, 0xec, 0x12, 0x98, 0x00, 0x0a, 0x00, - 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00 - }, - - /* 1: 400_266 */ - { - 0x8e, 0x0e, 0xe8, 0x13, 0x98, 0x00, 0x0a, 0x00, - 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00 - }, - - /* 2: 400 */ - { - 0x8e, 0x0e, 0xe8, 0x12, 0x98, 0x00, 0x0a, 0x00, - 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00 - }, - - /* 3: 533 */ - { - 0x8e, 0x43, 0x60, 0x13, 0x98, 0x00, 0x0a, 0x00, - 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00 - }, - - /* 4: 600 */ - { - 0x8d, 0x02, 0x34, 0x13, 0x98, 0x00, 0x0a, 0x00, - 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00 - }, - - /* 5: 666 */ - { - 0x8d, 0x03, 0x78, 0x13, 0x98, 0x00, 0x0a, 0x00, - 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00 - }, - - {} -}; - -static uchar -testbuf[EEPROM_SDSTP_PARAM] = { - 0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, - 0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff -}; - -static void -pll_debug(int off) -{ - int i; - uchar buffer[EEPROM_SDSTP_PARAM]; - - memset(buffer, 0, sizeof(buffer)); - eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, off, - buffer, EEPROM_SDSTP_PARAM); - - printf("Debug: SDSTP[0-3] at offset \"0x%02x\" lists as follows: \n", off); - for (i = 0; i < EEPROM_SDSTP_PARAM; i++) - printf("%02x ", buffer[i]); - printf("\n"); -} - -static void -test_write(void) -{ - printf("Debug: test eeprom_write ... "); - - /* - * Write twice, 8 bytes per write - */ - eeprom_write (CONFIG_SYS_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET, - testbuf, 8); - eeprom_write (CONFIG_SYS_I2C_EEPROM_ADDR, EEPROM_TEST_OFFSET+8, - testbuf, 16); - printf("done\n"); - - pll_debug(EEPROM_TEST_OFFSET); -} - -int -do_pll_alter (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) -{ - char c = '\0'; - pll_freq_t pll_freq; - if (argc < 2) { - cmd_usage(cmdtp); - goto ret; - } - - for (pll_freq = PLL_ebc20; pll_freq < PLL_TOTAL; pll_freq++) - if (!strcmp(pll_name[pll_freq], argv[1])) - break; - - switch (pll_freq) { - case PLL_ebc20: - case PLL_333: - case PLL_4001: - case PLL_4002: - case PLL_533: - case PLL_600: - EEPROM_ALTER_FREQ(pll_freq); - break; - - case PLL_666: /* not support */ - printf("Choose this option will result in a boot failure." - "\nContinue? (Y/N): "); - - c = getc(); putc('\n'); - - if ((c == 'y') || (c == 'Y')) { - EEPROM_ALTER_FREQ(pll_freq); - break; - } - goto ret; - - case RCONF: - pll_debug(EEPROM_CONF_OFFSET); - goto ret; - case WTEST: - printf("DEBUG: write test\n"); - test_write(); - goto ret; - - default: - printf("Invalid options\n\n"); - cmd_usage(cmdtp); - goto ret; - } - - printf("PLL set to %s, " - "reset the board to take effect\n", pll_name[pll_freq]); - - PLL_DEBUG; -ret: - return 0; -} - -U_BOOT_CMD( - pllalter, CONFIG_SYS_MAXARGS, 1, do_pll_alter, - "change pll frequence", - "pllalter <selection> - change pll frequence \n\n\ - ** New freq take effect after reset. ** \n\ - ----------------------------------------------\n\ - PLL_ebc20: Board: AMCC 405EX(r) Evaluation Board\n\ - \t Same as PLL_333 \n\ - \t except \n\ - \t EBC: 20 MHz \n\ - ----------------------------------------------\n\ - PLL_333: Board: AMCC 405EX(r) Evaluation Board\n\ - \t VCO: 666 MHz \n\ - \t CPU: 333 MHz \n\ - \t PLB: 166 MHz \n\ - \t OPB: 83 MHz \n\ - \t DDR: 83 MHz \n\ - ------------------------------------------------\n\ - PLL_400@1: Board: AMCC 405EX(r) Evaluation Board\n\ - \t VCO: 800 MHz \n\ - \t CPU: 400 MHz \n\ - \t PLB: 133 MHz \n\ - \t OPB: 66 MHz \n\ - \t DDR: 133 MHz \n\ - ------------------------------------------------\n\ - PLL_400@2: Board: AMCC 405EX(r) Evaluation Board\n\ - \t VCO: 800 MHz \n\ - \t CPU: 400 MHz \n\ - \t PLB: 200 MHz \n\ - \t OPB: 100 MHz \n\ - \t DDR: 200 MHz \n\ - ----------------------------------------------\n\ - PLL_533: Board: AMCC 405EX(r) Evaluation Board\n\ - \t VCO: 1066 MHz \n\ - \t CPU: 533 MHz \n\ - \t PLB: 177 MHz \n\ - \t OPB: 88 MHz \n\ - \t DDR: 177 MHz \n\ - ----------------------------------------------\n\ - PLL_600: Board: AMCC 405EX(r) Evaluation Board\n\ - \t VCO: 1200 MHz \n\ - \t CPU: 600 MHz \n\ - \t PLB: 200 MHz \n\ - \t OPB: 100 MHz \n\ - \t DDR: 200 MHz \n\ - ----------------------------------------------\n\ - PLL_666: Board: AMCC 405EX(r) Evaluation Board\n\ - \t VCO: 1333 MHz \n\ - \t CPU: 666 MHz \n\ - \t PLB: 166 MHz \n\ - \t OPB: 83 MHz \n\ - \t DDR: 166 MHz \n\ - -----------------------------------------------\n\ - RCONF: Read current eeprom configuration. \n\ - -----------------------------------------------\n\ - WTEST: Test EEPROM write with predefined values\n\ - -----------------------------------------------" -); - -#endif /* CONFIG_CMD_EEPROM */ diff --git a/board/esd/plu405/plu405.c b/board/esd/plu405/plu405.c index fdacbf6..e41545a 100644 --- a/board/esd/plu405/plu405.c +++ b/board/esd/plu405/plu405.c @@ -27,10 +27,7 @@ #include <command.h> #include <malloc.h> - -#if 0 -#define FPGA_DEBUG -#endif +#undef FPGA_DEBUG DECLARE_GLOBAL_DATA_PTR; @@ -48,7 +45,6 @@ const unsigned char fpgadata[] = */ #include "../common/fpga.c" - /* * include common auto-update code (for esd boards) */ @@ -68,7 +64,7 @@ int N_AU_IMAGES = (sizeof(au_image) / sizeof(au_image[0])); /* Prototypes */ int gunzip(void *, int, unsigned char *, unsigned long *); -int board_early_init_f (void) +int board_early_init_f(void) { /* * IRQ 0-15 405GP internally generated; active high; level sensitive @@ -94,15 +90,13 @@ int board_early_init_f (void) * EBC Configuration Register: set ready timeout to * 512 ebc-clks -> ca. 15 us */ - mtebc (epcr, 0xa8400000); /* ebc always driven */ + mtebc(epcr, 0xa8400000); /* ebc always driven */ return 0; } -int misc_init_r (void) +int misc_init_r(void) { - unsigned char *duart0_mcr = (unsigned char *)((ulong)DUART0_BA + 4); - unsigned char *duart1_mcr = (unsigned char *)((ulong)DUART1_BA + 4); unsigned char *dst; unsigned char fctr; ulong len = sizeof(fpgadata); @@ -115,9 +109,10 @@ int misc_init_r (void) gd->bd->bi_flashoffset = 0; dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE); - if (gunzip (dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) { - printf ("GUNZIP ERROR - must RESET board to recover\n"); - do_reset (NULL, 0, 0, NULL); + if (gunzip(dst, CONFIG_SYS_FPGA_MAX_SIZE, + (uchar *)fpgadata, &len) != 0) { + printf("GUNZIP ERROR - must RESET board to recover\n"); + do_reset(NULL, 0, 0, NULL); } status = fpga_boot(dst, len); @@ -152,7 +147,7 @@ int misc_init_r (void) for (index=0;index<1000;index++) udelay(1000); } - putc ('\n'); + putc('\n'); do_reset(NULL, 0, 0, NULL); } @@ -165,7 +160,7 @@ int misc_init_r (void) printf("%s ", &(dst[index+1])); index += len+3; } - putc ('\n'); + putc('\n'); free(dst); @@ -180,29 +175,35 @@ int misc_init_r (void) /* * Reset external DUARTs */ - out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CONFIG_SYS_DUART_RST); + out_be32((void*)GPIO0_OR, + in_be32((void*)GPIO0_OR) | CONFIG_SYS_DUART_RST); udelay(10); - out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~CONFIG_SYS_DUART_RST); + out_be32((void*)GPIO0_OR, + in_be32((void*)GPIO0_OR) & ~CONFIG_SYS_DUART_RST); udelay(1000); /* * Set NAND-FLASH GPIO signals to default */ out_be32((void*)GPIO0_OR, - in_be32((void*)GPIO0_OR) & ~(CONFIG_SYS_NAND_CLE | CONFIG_SYS_NAND_ALE)); - out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CONFIG_SYS_NAND_CE); + in_be32((void*)GPIO0_OR) & + ~(CONFIG_SYS_NAND_CLE | CONFIG_SYS_NAND_ALE)); + out_be32((void*)GPIO0_OR, + in_be32((void*)GPIO0_OR) | CONFIG_SYS_NAND_CE); /* * Setup EEPROM write protection */ - out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CONFIG_SYS_EEPROM_WP); - out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) | CONFIG_SYS_EEPROM_WP); + out_be32((void*)GPIO0_OR, + in_be32((void*)GPIO0_OR) | CONFIG_SYS_EEPROM_WP); + out_be32((void*)GPIO0_TCR, + in_be32((void*)GPIO0_TCR) | CONFIG_SYS_EEPROM_WP); /* * Enable interrupts in exar duart mcr[3] */ - out_8(duart0_mcr, 0x08); - out_8(duart1_mcr, 0x08); + out_8((void *)DUART0_BA + 4, 0x08); + out_8((void *)DUART1_BA + 4, 0x08); /* * Enable auto RS485 mode in 2nd external uart @@ -213,26 +214,25 @@ int misc_init_r (void) out_8((void *)DUART1_BA + 1, fctr); /* write FCTR */ out_8((void *)DUART1_BA + 3, 0); /* write LCR */ - return (0); + return 0; } /* * Check Board Identity: */ -int checkboard (void) +int checkboard(void) { char str[64]; - int i = getenv_r ("serial#", str, sizeof(str)); + int i = getenv_r("serial#", str, sizeof(str)); - puts ("Board: "); + puts("Board: "); - if (i == -1) { - puts ("### No HW ID - assuming PLU405"); - } else { + if (i == -1) + puts("### No HW ID - assuming PLU405"); + else puts(str); - } - putc ('\n'); + putc('\n'); return 0; } @@ -245,10 +245,12 @@ void ide_set_reset(int on) */ if (on) { /* assert RESET */ out_be16((void *)FPGA_CTRL, - in_be16((void *)FPGA_CTRL) & ~CONFIG_SYS_FPGA_CTRL_CF_RESET); + in_be16((void *)FPGA_CTRL) & + ~CONFIG_SYS_FPGA_CTRL_CF_RESET); } else { /* release RESET */ out_be16((void *)FPGA_CTRL, - in_be16((void *)FPGA_CTRL) | CONFIG_SYS_FPGA_CTRL_CF_RESET); + in_be16((void *)FPGA_CTRL) | + CONFIG_SYS_FPGA_CTRL_CF_RESET); } } #endif /* CONFIG_IDE_RESET */ @@ -266,14 +268,14 @@ void reset_phy(void) #if defined(CONFIG_SYS_EEPROM_WREN) /* Input: <dev_addr> I2C address of EEPROM device to enable. - * <state> -1: deliver current state - * 0: disable write - * 1: enable write - * Returns: -1: wrong device address - * 0: dis-/en- able done - * 0/1: current state if <state> was -1. + * <state> -1: deliver current state + * 0: disable write + * 1: enable write + * Returns: -1: wrong device address + * 0: dis-/en- able done + * 0/1: current state if <state> was -1. */ -int eeprom_write_enable (unsigned dev_addr, int state) +int eeprom_write_enable(unsigned dev_addr, int state) { if (CONFIG_SYS_I2C_EEPROM_ADDR != dev_addr) { return -1; @@ -282,51 +284,55 @@ int eeprom_write_enable (unsigned dev_addr, int state) case 1: /* Enable write access, clear bit GPIO0. */ out_be32((void*)GPIO0_OR, - in_be32((void*)GPIO0_OR) & ~CONFIG_SYS_EEPROM_WP); + in_be32((void*)GPIO0_OR) & + ~CONFIG_SYS_EEPROM_WP); state = 0; break; case 0: /* Disable write access, set bit GPIO0. */ out_be32((void*)GPIO0_OR, - in_be32((void*)GPIO0_OR) | CONFIG_SYS_EEPROM_WP); + in_be32((void*)GPIO0_OR) | + CONFIG_SYS_EEPROM_WP); state = 0; break; default: /* Read current status back. */ - state = (0 == (in_be32((void*)GPIO0_OR) & - CONFIG_SYS_EEPROM_WP)); + state = ((in_be32((void*)GPIO0_OR) & + CONFIG_SYS_EEPROM_WP) == 0); break; } } return state; } -int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { int query = argc == 1; int state = 0; if (query) { /* Query write access state. */ - state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, -1); + state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, -1); if (state < 0) { - puts ("Query of write access state failed.\n"); + puts("Query of write access state failed.\n"); } else { - printf ("Write access for device 0x%0x is %sabled.\n", - CONFIG_SYS_I2C_EEPROM_ADDR, state ? "en" : "dis"); + printf("Write access for device 0x%0x is %sabled.\n", + CONFIG_SYS_I2C_EEPROM_ADDR, + state ? "en" : "dis"); state = 0; } } else { - if ('0' == argv[1][0]) { + if (argv[1][0] == '0') { /* Disable write access. */ - state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 0); + state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, + 0); } else { /* Enable write access. */ - state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 1); - } - if (state < 0) { - puts ("Setup of write access state failed.\n"); + state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, + 1); } + if (state < 0) + puts("Setup of write access state failed.\n"); } return state; diff --git a/board/esd/pmc405de/Makefile b/board/esd/pmc405de/Makefile new file mode 100644 index 0000000..a080649 --- /dev/null +++ b/board/esd/pmc405de/Makefile @@ -0,0 +1,53 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS-y = $(BOARD).o +COBJS-y += ../common/cmd_loadpci.o +COBJS-$(CONFIG_CMD_CHIP_CONFIG) += chip_config.o + +COBJS := $(COBJS-y) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/esd/pmc405de/chip_config.c b/board/esd/pmc405de/chip_config.c new file mode 100644 index 0000000..e93a32c --- /dev/null +++ b/board/esd/pmc405de/chip_config.c @@ -0,0 +1,61 @@ +/* + * (C) Copyright 2008-2009 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include <common.h> +#include <asm/ppc4xx_config.h> + +struct ppc4xx_config ppc4xx_config_val[] = { + { + "133", + "CPU: 133 PLB: 133 OPB: 66 EBC: 44 PCI: 44/66", + { + 0x19, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x40, 0x12, 0x12, 0x42, 0x3e, 0x00, 0x00 + } + }, + { + "266", + "CPU: 266 PLB: 133 OPB: 66 EBC: 44 PCI: 44/66", + { + 0x19, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x50, 0x22, 0x2d, 0x42, 0x3e, 0x00, 0x00 + } + }, + { + "333", + "CPU: 333 PLB: 111 OPB: 55 EBC: 55 PCI: 55/111", + { + 0x19, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x60, 0x29, 0x2d, 0x42, 0xbe, 0x00, 0x00 + } + }, +}; + +int ppc4xx_config_count = ARRAY_SIZE(ppc4xx_config_val); diff --git a/board/esd/pmc405de/config.mk b/board/esd/pmc405de/config.mk new file mode 100644 index 0000000..ae855dc --- /dev/null +++ b/board/esd/pmc405de/config.mk @@ -0,0 +1,23 @@ +# +# (C) Copyright 2000 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +TEXT_BASE = 0xFFFC0000 diff --git a/board/esd/pmc405de/pmc405de.c b/board/esd/pmc405de/pmc405de.c new file mode 100644 index 0000000..f68e1b5 --- /dev/null +++ b/board/esd/pmc405de/pmc405de.c @@ -0,0 +1,521 @@ +/* + * (C) Copyright 2009 + * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd.eu + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <libfdt.h> +#include <fdt_support.h> +#include <asm/processor.h> +#include <asm/io.h> +#include <asm/gpio.h> +#include <asm/4xx_pci.h> +#include <command.h> +#include <malloc.h> + +/* + * PMC405-DE cpld registers + * - all registers are 8 bit + * - all registers are on 32 bit addesses + */ +struct pmc405de_cpld { + /* cpld design version */ + u8 version; + u8 reserved0[3]; + + /* misc. status lines */ + u8 status; + u8 reserved1[3]; + + /* + * gated control flags + * gate bit(s) must be written with '1' to + * access control flag + */ + u8 control; + u8 reserved2[3]; +}; + +#define CPLD_VERSION_MASK 0x0f +#define CPLD_CONTROL_POSTLED_N 0x01 +#define CPLD_CONTROL_POSTLED_GATE 0x02 +#define CPLD_CONTROL_RESETOUT_N 0x40 +#define CPLD_CONTROL_RESETOUT_N_GATE 0x80 + +DECLARE_GLOBAL_DATA_PTR; + +extern void __ft_board_setup(void *blob, bd_t *bd); +extern void pll_write(u32 a, u32 b); + +static int wait_for_pci_ready_done; + +static int is_monarch(void); +static int pci_is_66mhz(void); +static int board_revision(void); +static int cpld_revision(void); +static void upd_plb_pci_div(u32 pllmr0, u32 pllmr1, u32 div); + +int board_early_init_f(void) +{ + u32 pllmr0, pllmr1; + + /* + * check M66EN and patch PLB:PCI divider for 66MHz PCI + * + * fCPU==333MHz && fPCI==66MHz (PLBDiv==3 && M66EN==1): PLB/PCI=1 + * fCPU==333MHz && fPCI==33MHz (PLBDiv==3 && M66EN==0): PLB/PCI=2 + * fCPU==133|266MHz && fPCI==66MHz (PLBDiv==1|2 && M66EN==1): PLB/PCI=2 + * fCPU==133|266MHz && fPCI==33MHz (PLBDiv==1|2 && M66EN==0): PLB/PCI=3 + * + * calling upd_plb_pci_div() may end in calling pll_write() which will + * do a chip reset and never return. + */ + pllmr0 = mfdcr(CPC0_PLLMR0); + pllmr1 = mfdcr(CPC0_PLLMR1); + + if ((pllmr0 & PLLMR0_CPU_TO_PLB_MASK) == PLLMR0_CPU_PLB_DIV_3) { + /* fCPU=333MHz, fPLB=111MHz */ + if (pci_is_66mhz()) + upd_plb_pci_div(pllmr0, pllmr1, PLLMR0_PCI_PLB_DIV_1); + else + upd_plb_pci_div(pllmr0, pllmr1, PLLMR0_PCI_PLB_DIV_2); + } else { + /* fCPU=133|266MHz, fPLB=133MHz */ + if (pci_is_66mhz()) + upd_plb_pci_div(pllmr0, pllmr1, PLLMR0_PCI_PLB_DIV_2); + else + upd_plb_pci_div(pllmr0, pllmr1, PLLMR0_PCI_PLB_DIV_3); + } + + /* + * IRQ 25 (EXT IRQ 0) PCI-INTA#; active low; level sensitive + * IRQ 26 (EXT IRQ 1) PCI-INTB#; active low; level sensitive + * IRQ 27 (EXT IRQ 2) PCI-INTC#; active low; level sensitive + * IRQ 28 (EXT IRQ 3) PCI-INTD#; active low; level sensitive + * IRQ 29 (EXT IRQ 4) ETH0-PHY-IRQ#; active low; level sensitive + * IRQ 30 (EXT IRQ 5) ETH1-PHY-IRQ#; active low; level sensitive + * IRQ 31 (EXT IRQ 6) PLD-IRQ#; active low; level sensitive + */ + mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(uicer, 0x00000000); /* disable all ints */ + mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/ + mtdcr(uicpr, 0xFFFFFF80); /* set int polarities */ + mtdcr(uictr, 0x10000000); /* set int trigger levels */ + mtdcr(uicvcr, 0x00000001); /* set vect base=0, INT0 highest prio */ + mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + + /* + * EBC Configuration Register: + * - set ready timeout to 512 ebc-clks -> ca. 15 us + * - EBC lines are always driven + */ + mtebc(epcr, 0xa8400000); + + return 0; +} + +static void upd_plb_pci_div(u32 pllmr0, u32 pllmr1, u32 div) +{ + if ((pllmr0 & PLLMR0_PCI_TO_PLB_MASK) != div) + pll_write((pllmr0 & ~PLLMR0_PCI_TO_PLB_MASK) | div, pllmr1); +} + +int misc_init_r(void) +{ + int i; + struct ppc4xx_gpio *gpio0 = (struct ppc4xx_gpio *)GPIO_BASE; + struct pmc405de_cpld *cpld = + (struct pmc405de_cpld *)CONFIG_SYS_CPLD_BASE; + + if (!is_monarch()) { + /* PCI configuration done: release EREADY */ + setbits_be32(&gpio0->or, CONFIG_SYS_GPIO_EREADY); + setbits_be32(&gpio0->tcr, CONFIG_SYS_GPIO_EREADY); + } + + /* turn off POST LED */ + out_8(&cpld->control, + CPLD_CONTROL_POSTLED_N | CPLD_CONTROL_POSTLED_GATE); + + /* turn on LEDs: RUN, A, B */ + clrbits_be32(&gpio0->or, + CONFIG_SYS_GPIO_LEDRUN_N | + CONFIG_SYS_GPIO_LEDA_N | + CONFIG_SYS_GPIO_LEDB_N); + + for (i=0; i < 200; i++) + udelay(1000); + + /* turn off LEDs: A, B */ + setbits_be32(&gpio0->or, + CONFIG_SYS_GPIO_LEDA_N | + CONFIG_SYS_GPIO_LEDB_N); + + return (0); +} + +static int is_monarch(void) +{ + struct ppc4xx_gpio *gpio0 = (struct ppc4xx_gpio *)GPIO_BASE; + return (in_be32(&gpio0->ir) & CONFIG_SYS_GPIO_MONARCH_N) == 0; +} + +static int pci_is_66mhz(void) +{ + struct ppc4xx_gpio *gpio0 = (struct ppc4xx_gpio *)GPIO_BASE; + return (in_be32(&gpio0->ir) & CONFIG_SYS_GPIO_M66EN); +} + +static int board_revision(void) +{ + struct ppc4xx_gpio *gpio0 = (struct ppc4xx_gpio *)GPIO_BASE; + return ((in_be32(&gpio0->ir) & CONFIG_SYS_GPIO_HWREV_MASK) >> + CONFIG_SYS_GPIO_HWREV_SHIFT); +} + +static int cpld_revision(void) +{ + struct pmc405de_cpld *cpld = + (struct pmc405de_cpld *)CONFIG_SYS_CPLD_BASE; + return ((in_8(&cpld->version) & CPLD_VERSION_MASK)); +} + +/* + * Check Board Identity + */ +int checkboard(void) +{ + puts("Board: esd GmbH - PMC-CPU/405-DE"); + + gd->board_type = board_revision(); + printf(", Rev 1.%ld, ", gd->board_type); + + if (!is_monarch()) + puts("non-"); + + printf("monarch, PCI=%s MHz, PLD-Rev 1.%d\n", + pci_is_66mhz() ? "66" : "33", cpld_revision()); + + return 0; +} + + +static void wait_for_pci_ready(void) +{ + struct ppc4xx_gpio *gpio0 = (struct ppc4xx_gpio *)GPIO_BASE; + int i; + char *s = getenv("pcidelay"); + + /* only wait once */ + if (wait_for_pci_ready_done) + return; + + /* + * We have our own handling of the pcidelay variable. + * Using CONFIG_PCI_BOOTDELAY enables pausing for host + * and adapter devices. For adapter devices we do not + * want this. + */ + if (s) { + int ms = simple_strtoul(s, NULL, 10); + printf("PCI: Waiting for %d ms\n", ms); + for (i=0; i<ms; i++) + udelay(1000); + } + + if (!(in_be32(&gpio0->ir) & CONFIG_SYS_GPIO_EREADY)) { + printf("PCI: Waiting for EREADY (CTRL-C to skip) ... "); + while (1) { + if (ctrlc()) { + puts("abort\n"); + break; + } + if (in_be32(&gpio0->ir) & CONFIG_SYS_GPIO_EREADY) { + printf("done\n"); + break; + } + } + } + + wait_for_pci_ready_done = 1; +} + +/* + * Overwrite weak is_pci_host() + * + * This routine is called to determine if a pci scan should be + * performed. With various hardware environments (especially cPCI and + * PPMC) it's insufficient to depend on the state of the arbiter enable + * bit in the strap register, or generic host/adapter assumptions. + * + * Return 0 for adapter mode, non-zero for host (monarch) mode. + */ +int is_pci_host(struct pci_controller *hose) +{ + char *s; + + if (!is_monarch()) { + /* + * Overwrite PCI identification when running in + * non-monarch mode + * This should be moved into pci_target_init() + * when it is sometimes available for 405 CPUs + */ + pci_write_config_word(PCIDEVID_405GP, + PCI_SUBSYSTEM_ID, + CONFIG_SYS_PCI_SUBSYS_ID_NONMONARCH); + pci_write_config_word(PCIDEVID_405GP, + PCI_CLASS_SUB_CODE, + CONFIG_SYS_PCI_CLASSCODE_NONMONARCH); + } + + s = getenv("pciscan"); + if (s == NULL) { + if (is_monarch()) { + wait_for_pci_ready(); + return 1; + } else { + return 0; + } + } else { + if (!strcmp(s, "yes")) + return 1; + } + + return 0; +} + +/* + * Overwrite weak pci_pre_init() + * + * The default implementation enables the 405EP + * internal PCI arbiter. We do not want that + * on a PMC module. + */ +int pci_pre_init(struct pci_controller *hose) +{ + return 1; +} + +#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ + int rc; + + __ft_board_setup(blob, bd); + + /* + * Disable PCI in non-monarch mode. + */ + if (!is_monarch()) { + rc = fdt_find_and_setprop(blob, "/plb/pci@ec000000", "status", + "disabled", sizeof("disabled"), 1); + if (rc) { + printf("Unable to update property status in PCI node, " + "err=%s\n", + fdt_strerror(rc)); + } + } +} +#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ + +#if defined(CONFIG_SYS_EEPROM_WREN) +/* Input: <dev_addr> I2C address of EEPROM device to enable. + * <state> -1: deliver current state + * 0: disable write + * 1: enable write + * Returns: -1: wrong device address + * 0: dis-/en- able done + * 0/1: current state if <state> was -1. + */ +int eeprom_write_enable(unsigned dev_addr, int state) +{ + struct ppc4xx_gpio *gpio0 = (struct ppc4xx_gpio *)GPIO_BASE; + + if (CONFIG_SYS_I2C_EEPROM_ADDR != dev_addr) { + return -1; + } else { + switch (state) { + case 1: + /* Enable write access, clear bit GPIO0. */ + clrbits_be32(&gpio0->or, CONFIG_SYS_GPIO_EEPROM_WP); + state = 0; + break; + case 0: + /* Disable write access, set bit GPIO0. */ + setbits_be32(&gpio0->or, CONFIG_SYS_GPIO_EEPROM_WP); + state = 0; + break; + default: + /* Read current status back. */ + state = (0 == (in_be32(&gpio0->or) & + CONFIG_SYS_GPIO_EEPROM_WP)); + break; + } + } + return state; +} + +int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + int query = argc == 1; + int state = 0; + + if (query) { + /* Query write access state. */ + state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, - 1); + if (state < 0) { + puts("Query of write access state failed.\n"); + } else { + printf("Write access for device 0x%0x is %sabled.\n", + CONFIG_SYS_I2C_EEPROM_ADDR, + state ? "en" : "dis"); + state = 0; + } + } else { + if ('0' == argv[1][0]) { + /* Disable write access. */ + state = eeprom_write_enable( + CONFIG_SYS_I2C_EEPROM_ADDR, 0); + } else { + /* Enable write access. */ + state = eeprom_write_enable( + CONFIG_SYS_I2C_EEPROM_ADDR, 1); + } + if (state < 0) + puts ("Setup of write access state failed.\n"); + } + + return state; +} + +U_BOOT_CMD(eepwren, 2, 0, do_eep_wren, + "Enable / disable / query EEPROM write access", + "" +); +#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */ + +#if defined(CONFIG_PRAM) +#include <environment.h> +extern env_t *env_ptr; + +int do_painit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + u32 pram, nextbase, base; + char *v; + u32 param; + ulong *lptr; + + v = getenv("pram"); + if (v) + pram = simple_strtoul(v, NULL, 10); + else { + printf("Error: pram undefined. Please define pram in KiB\n"); + return 1; + } + + base = gd->bd->bi_memsize; +#if defined(CONFIG_LOGBUFFER) + base -= LOGBUFF_LEN + LOGBUFF_OVERHEAD; +#endif + /* + * gd->bd->bi_memsize == physical ram size - CONFIG_SYS_MM_TOP_HIDE + */ + param = base - (pram << 10); + printf("PARAM: @%08x\n", param); + debug("memsize=0x%08x, base=0x%08x\n", gd->bd->bi_memsize, base); + + /* clear entire PA ram */ + memset((void*)param, 0, (pram << 10)); + + /* reserve 4k for pointer field */ + nextbase = base - 4096; + lptr = (ulong*)(base); + + /* + * *(--lptr) = item_size; + * *(--lptr) = base - item_base = distance from field top; + */ + + /* env is first (4k aligned) */ + nextbase -= ((CONFIG_ENV_SIZE + 4096 - 1) & ~(4096 - 1)); + memcpy((void*)nextbase, env_ptr, CONFIG_ENV_SIZE); + *(--lptr) = CONFIG_ENV_SIZE; /* size */ + *(--lptr) = base - nextbase; /* offset | type=0 */ + + /* free section */ + *(--lptr) = nextbase - param; /* size */ + *(--lptr) = (base - param) | 126; /* offset | type=126 */ + + /* terminate pointer field */ + *(--lptr) = crc32(0, (void*)(base - 0x10), 0x10); + *(--lptr) = 0; /* offset=0 -> terminator */ + return 0; +} +U_BOOT_CMD( + painit, 1, 1, do_painit, + "prepare PciAccess system", + "" +); +#endif /* CONFIG_PRAM */ + +int do_selfreset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + struct ppc4xx_gpio *gpio0 = (struct ppc4xx_gpio *)GPIO_BASE; + setbits_be32(&gpio0->tcr, CONFIG_SYS_GPIO_SELFRST_N); + return 0; +} +U_BOOT_CMD( + selfreset, 1, 1, do_selfreset, + "assert self-reset# signal", + "" +); + +int do_resetout(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + struct pmc405de_cpld *cpld = + (struct pmc405de_cpld *)CONFIG_SYS_CPLD_BASE; + + if (argc > 1) { + if (argv[1][0] == '0') { + /* assert */ + printf("PMC-RESETOUT# asserted\n"); + out_8(&cpld->control, + CPLD_CONTROL_RESETOUT_N_GATE); + } else { + /* deassert */ + printf("PMC-RESETOUT# deasserted\n"); + out_8(&cpld->control, + CPLD_CONTROL_RESETOUT_N | + CPLD_CONTROL_RESETOUT_N_GATE); + } + } else { + printf("PMC-RESETOUT# is %s\n", + (in_8(&cpld->control) & CPLD_CONTROL_RESETOUT_N) ? + "inactive" : "active"); + } + return 0; +} +U_BOOT_CMD( + resetout, 2, 1, do_resetout, + "assert PMC-RESETOUT# signal", + "" +); diff --git a/board/esd/pmc405de/u-boot.lds b/board/esd/pmc405de/u-boot.lds new file mode 100644 index 0000000..8c01016 --- /dev/null +++ b/board/esd/pmc405de/u-boot.lds @@ -0,0 +1,133 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + .resetvec 0xFFFFFFFC : + { + *(.resetvec) + } = 0xffff + + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + cpu/ppc4xx/start.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.eh_frame) + *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss (NOLOAD) : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + . = ALIGN(4); + } + _end = . ; + PROVIDE (end = .); +} diff --git a/board/esd/pmc440/pmc440.c b/board/esd/pmc440/pmc440.c index 2ab944d..f22a1c2 100644 --- a/board/esd/pmc440/pmc440.c +++ b/board/esd/pmc440/pmc440.c @@ -142,7 +142,7 @@ int board_early_init_f(void) reg |= CPR0_ICFG_RLI_MASK; mtcpr(clk_icfg, reg); - mtspr(dbcr0, 0x20000000); /* do chip reset */ + mtspr(SPRN_DBCR0, 0x20000000); /* do chip reset */ } /* diff --git a/board/gdsys/dlvision/Makefile b/board/gdsys/dlvision/Makefile new file mode 100644 index 0000000..1270fea --- /dev/null +++ b/board/gdsys/dlvision/Makefile @@ -0,0 +1,51 @@ +# +# (C) Copyright 2007 +# Stefan Roese, DENX Software Engineering, sr@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS = $(BOARD).o +SOBJS = + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/gdsys/dlvision/config.mk b/board/gdsys/dlvision/config.mk new file mode 100644 index 0000000..1bdf5e4 --- /dev/null +++ b/board/gdsys/dlvision/config.mk @@ -0,0 +1,24 @@ +# +# (C) Copyright 2000 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0xFFFC0000 diff --git a/board/gdsys/dlvision/dlvision.c b/board/gdsys/dlvision/dlvision.c new file mode 100644 index 0000000..4ec1cdb --- /dev/null +++ b/board/gdsys/dlvision/dlvision.c @@ -0,0 +1,137 @@ +/* + * (C) Copyright 2009 + * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <asm/processor.h> +#include <asm/io.h> +#include <asm/gpio.h> + +enum { + HWTYPE_DLVISION_CPU = 0, + HWTYPE_DLVISION_CON = 1, +}; + +#define HWREV_100 6 + +int board_early_init_f(void) +{ + mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(uicer, 0x00000000); /* disable all ints */ + mtdcr(uiccr, 0x00000000); /* set all to be non-critical */ + mtdcr(uicpr, 0xFFFFFF80); /* set int polarities */ + mtdcr(uictr, 0x10000000); /* set int trigger levels */ + mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest prio */ + mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + + /* + * EBC Configuration Register: set ready timeout to 512 ebc-clks + * -> ca. 15 us + */ + mtebc(epcr, 0xa8400000); /* ebc always driven */ + + /* + * setup io-latches + */ + out_le16((void *)CONFIG_SYS_LATCH_BASE, 0x00f0); + out_le16((void *)(CONFIG_SYS_LATCH_BASE + 0x100), 0x0002); + out_le16((void *)(CONFIG_SYS_LATCH_BASE + 0x200), 0x0000); + return 0; +} + +int misc_init_r(void) +{ + /* + * set "startup-finished"-gpios + */ + gpio_write_bit(21, 0); + gpio_write_bit(22, 1); + + return 0; +} + +/* + * Check Board Identity: + */ +int checkboard(void) +{ + char *s = getenv("serial#"); + u8 channel2_msr = in_8((void *)CONFIG_UART_BASE + 0x26); + u8 channel3_msr = in_8((void *)CONFIG_UART_BASE + 0x36); + u8 channel7_msr = in_8((void *)CONFIG_UART_BASE + 0x76); + u8 unit_type; + u8 local_con; + u8 audio; + u8 hardware_version; + + printf("Board: "); + + unit_type = (channel2_msr & 0x80) ? 0x01 : 0x00; + local_con = (channel2_msr & 0x20) ? 0x01 : 0x00; + audio = (channel3_msr & 0x20) ? 0x01 : 0x00; + hardware_version = + ((channel7_msr & 0x20) ? 0x01 : 0x00) + | ((channel7_msr & 0x80) ? 0x02 : 0x00) + | ((channel7_msr & 0x40) ? 0x04 : 0x00); + + switch (unit_type) { + case HWTYPE_DLVISION_CON: + printf("DL-Vision-CON"); + break; + + case HWTYPE_DLVISION_CPU: + printf("DL-Vision-CPU"); + break; + + default: + printf("UnitType %d, unsupported", unit_type); + break; + } + + if (s != NULL) { + puts(", serial# "); + puts(s); + } + puts("\n "); + + switch (hardware_version) { + case HWREV_100: + printf("HW-Ver 1.00"); + break; + + default: + printf("HW-Ver %d, unsupported", + hardware_version); + break; + } + + if (local_con) + printf(", local console"); + + if (audio) + printf(", audio support"); + + puts("\n"); + + return 0; +} diff --git a/board/gdsys/dlvision/u-boot.lds b/board/gdsys/dlvision/u-boot.lds new file mode 100644 index 0000000..d803625 --- /dev/null +++ b/board/gdsys/dlvision/u-boot.lds @@ -0,0 +1,132 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + .resetvec 0xFFFFFFFC : + { + *(.resetvec) + } = 0xffff + + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + cpu/ppc4xx/start.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss (NOLOAD) : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} diff --git a/board/mpl/mip405/mip405.c b/board/mpl/mip405/mip405.c index 24caa46..1738f54 100644 --- a/board/mpl/mip405/mip405.c +++ b/board/mpl/mip405/mip405.c @@ -688,7 +688,7 @@ int misc_init_r (void) start=get_timer(0); /* if MIP405 has booted from PCI, reset CCR0[24] as described in errata PCI_18 */ if (mfdcr(strap) & PSR_ROM_LOC) - mtspr(ccr0, (mfspr(ccr0) & ~0x80)); + mtspr(SPRN_CCR0, (mfspr(SPRN_CCR0) & ~0x80)); return (0); } diff --git a/board/mpl/pip405/pip405.c b/board/mpl/pip405/pip405.c index f31a5e8..677437d 100644 --- a/board/mpl/pip405/pip405.c +++ b/board/mpl/pip405/pip405.c @@ -669,7 +669,7 @@ int misc_init_r (void) /* if PIP405 has booted from PCI, reset CCR0[24] as described in errata PCI_18 */ if (mfdcr(strap) & PSR_ROM_LOC) - mtspr(ccr0, (mfspr(ccr0) & ~0x80)); + mtspr(SPRN_CCR0, (mfspr(SPRN_CCR0) & ~0x80)); return (0); } diff --git a/board/netstal/hcu5/hcu5.c b/board/netstal/hcu5/hcu5.c index 6f4ec29..5eb33d3 100644 --- a/board/netstal/hcu5/hcu5.c +++ b/board/netstal/hcu5/hcu5.c @@ -89,8 +89,8 @@ int board_early_init_f(void) /* * Initiate system reset in debug control register DBCR */ - dbcr = mfspr(dbcr0); - mtspr(dbcr0, dbcr | CHIP_RESET); + dbcr = mfspr(SPRN_DBCR0); + mtspr(SPRN_DBCR0, dbcr | CHIP_RESET); } mtsdr(SDR0_CP440, 0x0EAAEA02); /* [Nto1] = 1*/ #endif @@ -307,14 +307,14 @@ int misc_init_r(void) /* We cannot easily enable trace before, as there are other * routines messing around with sdr0_pfc1. And I do not need it. */ - if (mfspr(dbcr0) & 0x80000000) { + if (mfspr(SPRN_DBCR0) & 0x80000000) { /* External debugger alive * enable trace facilty for Lauterbach * CCR0[DTB]=0 Enable broadcast of trace information * SDR0_PFC0[TRE] Trace signals are enabled instead of * GPIO49-63 */ - mtspr(ccr0, mfspr(ccr0) &~ (CCR0_DTB)); + mtspr(SPRN_CCR0, mfspr(SPRN_CCR0) &~ (CCR0_DTB)); mtsdr(SDR0_PFC0, sdr0_pfc1 | SDR0_PFC0_TRE_ENABLE); } return 0; diff --git a/board/netstal/hcu5/sdram.c b/board/netstal/hcu5/sdram.c index f59bd7d..5c2ec35 100644 --- a/board/netstal/hcu5/sdram.c +++ b/board/netstal/hcu5/sdram.c @@ -144,7 +144,7 @@ static void program_ecc(unsigned long start_address, unsigned long num_bytes) u32 *magicPtr; u32 magic; - if ((mfspr(dbcr0) & 0x80000000) == 0) { + if ((mfspr(SPRN_DBCR0) & 0x80000000) == 0) { /* only if no external debugger is alive! * Check whether vxWorks is using EDR logging, if yes zero * also PostMortem and user reserved memory @@ -182,7 +182,7 @@ static void program_ecc(unsigned long start_address, unsigned long num_bytes) * If not done, then we could get an interrupt later on when * exceptions are enabled. */ - mtspr(mcsr, mfspr(mcsr)); + mtspr(SPRN_MCSR, mfspr(SPRN_MCSR)); /* Set 'int_mask' parameter to functionnal value */ mfsdram(DDR0_01, val); diff --git a/board/netstal/mcu25/mcu25.c b/board/netstal/mcu25/mcu25.c index 66ed95f..67c1b0b 100644 --- a/board/netstal/mcu25/mcu25.c +++ b/board/netstal/mcu25/mcu25.c @@ -77,7 +77,7 @@ int board_early_init_f (void) out32(GPIO0_OR, CONFIG_SYS_GPIO0_OR ); out32(GPIO0_TCR, CONFIG_SYS_GPIO0_TCR); out32(GPIO0_ODR, CONFIG_SYS_GPIO0_ODR); - mtspr(ccr0, 0x00700000); + mtspr(SPRN_CCR0, 0x00700000); return 0; } diff --git a/board/xpedite1k/Makefile b/board/xes/xpedite1000/Makefile index 6ab1a26..b93f2c3 100644 --- a/board/xpedite1k/Makefile +++ b/board/xes/xpedite1000/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o +COBJS = $(BOARD).o SOBJS = init.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/board/xpedite1k/config.mk b/board/xes/xpedite1000/config.mk index 33dfbf1..33dfbf1 100644 --- a/board/xpedite1k/config.mk +++ b/board/xes/xpedite1000/config.mk diff --git a/board/xpedite1k/init.S b/board/xes/xpedite1000/init.S index 8a04f4f..54371e2 100644 --- a/board/xpedite1k/init.S +++ b/board/xes/xpedite1000/init.S @@ -1,5 +1,5 @@ /* -* Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com> +* Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com> * * See file CREDITS for list of people who contributed to this * project. @@ -24,62 +24,59 @@ #include <config.h> /* General */ -#define TLB_VALID 0x00000200 +#define TLB_VALID 0x00000200 /* Supported page sizes */ - -#define SZ_1K 0x00000000 -#define SZ_4K 0x00000010 -#define SZ_16K 0x00000020 -#define SZ_64K 0x00000030 -#define SZ_256K 0x00000040 -#define SZ_1M 0x00000050 -#define SZ_16M 0x00000070 -#define SZ_256M 0x00000090 +#define SZ_1K 0x00000000 +#define SZ_4K 0x00000010 +#define SZ_16K 0x00000020 +#define SZ_64K 0x00000030 +#define SZ_256K 0x00000040 +#define SZ_1M 0x00000050 +#define SZ_16M 0x00000070 +#define SZ_256M 0x00000090 /* Storage attributes */ -#define SA_W 0x00000800 /* Write-through */ -#define SA_I 0x00000400 /* Caching inhibited */ -#define SA_M 0x00000200 /* Memory coherence */ -#define SA_G 0x00000100 /* Guarded */ -#define SA_E 0x00000080 /* Endian */ +#define SA_W 0x00000800 /* Write-through */ +#define SA_I 0x00000400 /* Caching inhibited */ +#define SA_M 0x00000200 /* Memory coherence */ +#define SA_G 0x00000100 /* Guarded */ +#define SA_E 0x00000080 /* Endian */ /* Access control */ -#define AC_X 0x00000024 /* Execute */ -#define AC_W 0x00000012 /* Write */ -#define AC_R 0x00000009 /* Read */ +#define AC_X 0x00000024 /* Execute */ +#define AC_W 0x00000012 /* Write */ +#define AC_R 0x00000009 /* Read */ /* Some handy macros */ - #define EPN(e) ((e) & 0xfffffc00) -#define TLB0(epn,sz) ( (EPN((epn)) | (sz) | TLB_VALID ) ) -#define TLB1(rpn,erpn) ( ((rpn)&0xfffffc00) | (erpn) ) -#define TLB2(a) ( (a)&0x00000fbf ) +#define TLB0(epn,sz) ((EPN((epn)) | (sz) | TLB_VALID )) +#define TLB1(rpn,erpn) (((rpn)&0xfffffc00) | (erpn)) +#define TLB2(a) ((a)&0x00000fbf) -#define tlbtab_start\ - mflr r1 ;\ - bl 0f ; +#define tlbtab_start \ + mflr r1; \ + bl 0f; -#define tlbtab_end\ - .long 0, 0, 0 ; \ -0: mflr r0 ; \ - mtlr r1 ; \ - blr ; +#define tlbtab_end \ + .long 0, 0, 0; \ +0: mflr r0; \ + mtlr r1; \ + blr; #define tlbentry(epn,sz,rpn,erpn,attr)\ .long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr) -/************************************************************************** +/* * TLB TABLE * * This table is used by the cpu boot code to setup the initial tlb * entries. Rather than make broad assumptions in the cpu source tree, * this table lets each board set things up however they like. * - * Pointer to the table is returned in r1 - * - *************************************************************************/ + * Pointer to the table is returned in r1 + */ .section .bootpg,"ax" .globl tlbtab diff --git a/board/xpedite1k/u-boot.lds b/board/xes/xpedite1000/u-boot.lds index c8f9646..46b52fc 100644 --- a/board/xpedite1k/u-boot.lds +++ b/board/xes/xpedite1000/u-boot.lds @@ -66,7 +66,7 @@ SECTIONS /* the sector layout of our flash chips! XXX FIXME XXX */ cpu/ppc4xx/start.o (.text) - board/xpedite1k/init.o (.text) + board/xes/xpedite1000/init.o (.text) cpu/ppc4xx/kgdb.o (.text) cpu/ppc4xx/traps.o (.text) cpu/ppc4xx/interrupts.o (.text) @@ -78,9 +78,6 @@ SECTIONS lib_ppc/extable.o (.text) lib_generic/zlib.o (.text) -/* . = env_offset;*/ -/* common/env_embedded.o(.text)*/ - *(.text) *(.fixup) *(.got1) diff --git a/board/xpedite1k/u-boot.lds.debug b/board/xes/xpedite1000/u-boot.lds.debug index 5824cd9..68cd72d 100644 --- a/board/xpedite1k/u-boot.lds.debug +++ b/board/xes/xpedite1000/u-boot.lds.debug @@ -56,7 +56,7 @@ SECTIONS /* the sector layout of our flash chips! XXX FIXME XXX */ cpu/ppc4xx/start.o (.text) - board/xpedite1k/init.o (.text) + board/xes/xpedite1000/init.o (.text) cpu/ppc4xx/kgdb.o (.text) cpu/ppc4xx/traps.o (.text) cpu/ppc4xx/interrupts.o (.text) diff --git a/board/xes/xpedite1000/xpedite1000.c b/board/xes/xpedite1000/xpedite1000.c new file mode 100644 index 0000000..4529b7e --- /dev/null +++ b/board/xes/xpedite1000/xpedite1000.c @@ -0,0 +1,244 @@ +/* + * Copyright (C) 2003 Travis B. Sawyer <travis.sawyer@sandburst.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/processor.h> +#include <spd_sdram.h> +#include <i2c.h> +#include <net.h> + +DECLARE_GLOBAL_DATA_PTR; + +int board_early_init_f(void) +{ + unsigned long sdrreg; + + /* + * Enable GPIO for pins 18 - 24 + * 18 = SEEPROM_WP + * 19 = #M_RST + * 20 = #MONARCH + * 21 = #LED_ALARM + * 22 = #LED_ACT + * 23 = #LED_STATUS1 + * 24 = #LED_STATUS2 + */ + mfsdr(sdr_pfc0, sdrreg); + mtsdr(sdr_pfc0, (sdrreg & ~SDR0_PFC0_TRE_ENABLE) | 0x00003e00); + out32(CONFIG_SYS_GPIO_BASE + 0x018, (USR_LED0 | USR_LED1 | USR_LED2 | USR_LED3)); + LED0_OFF(); + LED1_OFF(); + LED2_OFF(); + LED3_OFF(); + + /* Setup the external bus controller/chip selects */ + mtebc(pb0ap, 0x04055200); /* 16MB Strata FLASH */ + mtebc(pb0cr, 0xff098000); /* BAS=0xff0 16MB R/W 8-bit */ + mtebc(pb1ap, 0x04055200); /* 512KB Socketed AMD FLASH */ + mtebc(pb1cr, 0xfe018000); /* BAS=0xfe0 1MB R/W 8-bit */ + mtebc(pb6ap, 0x05006400); /* 32-64MB AMD MirrorBit FLASH */ + mtebc(pb6cr, 0xf00da000); /* BAS=0xf00 64MB R/W i6-bit */ + mtebc(pb7ap, 0x05006400); /* 32-64MB AMD MirrorBit FLASH */ + mtebc(pb7cr, 0xf40da000); /* BAS=0xf40 64MB R/W 16-bit */ + + /* + * Setup the interrupt controller polarities, triggers, etc. + * + * Because of the interrupt handling rework to handle 440GX interrupts + * with the common code, we needed to change names of the UIC registers. + * Here the new relationship: + * + * U-Boot name 440GX name + * ----------------------- + * UIC0 UICB0 + * UIC1 UIC0 + * UIC2 UIC1 + * UIC3 UIC2 + */ + mtdcr(uic1sr, 0xffffffff); /* clear all */ + mtdcr(uic1er, 0x00000000); /* disable all */ + mtdcr(uic1cr, 0x00000003); /* SMI & UIC1 crit are critical */ + mtdcr(uic1pr, 0xfffffe00); /* per ref-board manual */ + mtdcr(uic1tr, 0x01c00000); /* per ref-board manual */ + mtdcr(uic1vr, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr(uic1sr, 0xffffffff); /* clear all */ + + mtdcr(uic2sr, 0xffffffff); /* clear all */ + mtdcr(uic2er, 0x00000000); /* disable all */ + mtdcr(uic2cr, 0x00000000); /* all non-critical */ + mtdcr(uic2pr, 0xffffc0ff); /* per ref-board manual */ + mtdcr(uic2tr, 0x00ff8000); /* per ref-board manual */ + mtdcr(uic2vr, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr(uic2sr, 0xffffffff); /* clear all */ + + mtdcr(uic3sr, 0xffffffff); /* clear all */ + mtdcr(uic3er, 0x00000000); /* disable all */ + mtdcr(uic3cr, 0x00000000); /* all non-critical */ + mtdcr(uic3pr, 0xffffffff); /* per ref-board manual */ + mtdcr(uic3tr, 0x00ff8c0f); /* per ref-board manual */ + mtdcr(uic3vr, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr(uic3sr, 0xffffffff); /* clear all */ + + mtdcr(uic0sr, 0xfc000000); /* clear all */ + mtdcr(uic0er, 0x00000000); /* disable all */ + mtdcr(uic0cr, 0x00000000); /* all non-critical */ + mtdcr(uic0pr, 0xfc000000); /* */ + mtdcr(uic0tr, 0x00000000); /* */ + mtdcr(uic0vr, 0x00000001); /* */ + + LED0_ON(); + + return 0; +} + +int checkboard(void) +{ + char *s; + + printf("Board: X-ES %s PMC SBC\n", CONFIG_SYS_BOARD_NAME); + printf(" "); + s = getenv("board_rev"); + if (s) + printf("Rev %s, ", s); + s = getenv("serial#"); + if (s) + printf("Serial# %s, ", s); + s = getenv("board_cfg"); + if (s) + printf("Cfg %s", s); + printf("\n"); + + return 0; +} + +phys_size_t initdram(int board_type) +{ + return spd_sdram(); +} + +/* + * This routine is called just prior to registering the hose and gives + * the board the opportunity to check things. Returning a value of zero + * indicates that things are bad & PCI initialization should be aborted. + * + * Different boards may wish to customize the pci controller structure + * (add regions, override default access routines, etc) or perform + * certain pre-initialization actions. + */ + +#if defined(CONFIG_PCI) +int pci_pre_init(struct pci_controller * hose) +{ + unsigned long strap; + + /* See if we're supposed to setup the pci */ + mfsdr(sdr_sdstp1, strap); + if ((strap & 0x00010000) == 0) + return 0; + +#if defined(CONFIG_SYS_PCI_FORCE_PCI_CONV) + /* Setup System Device Register PCIX0_XCR */ + mfsdr(sdr_xcr, strap); + strap &= 0x0f000000; + mtsdr(sdr_xcr, strap); +#endif + + return 1; +} +#endif /* defined(CONFIG_PCI) */ + +#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) +/* + * The bootstrap configuration provides default settings for the pci + * inbound map (PIM). But the bootstrap config choices are limited and + * may not be sufficient for a given board. + */ +void pci_target_init(struct pci_controller * hose) +{ + /* Disable everything */ + out32r(PCIX0_PIM0SA, 0); + out32r(PCIX0_PIM1SA, 0); + out32r(PCIX0_PIM2SA, 0); + out32r(PCIX0_EROMBA, 0); /* disable expansion rom */ + + /* + * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping + * options to not support sizes such as 128/256 MB. + */ + out32r(PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE); + out32r(PCIX0_PIM0LAH, 0); + out32r(PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1); + + out32r(PCIX0_BAR0, 0); + + /* Program the board's subsystem id/vendor id */ + out16r(PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID); + out16r(PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID); + + out16r(PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY); +} +#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ + +#if defined(CONFIG_PCI) +/* + * This routine is called to determine if a pci scan should be + * performed. With various hardware environments (especially cPCI and + * PPMC) it's insufficient to depend on the state of the arbiter enable + * bit in the strap register, or generic host/adapter assumptions. + * + * Rather than hard-code a bad assumption in the general 440 code, the + * 440 pci code requires the board to decide at runtime. + * + * Return 0 for adapter mode, non-zero for host (monarch) mode. + */ +int is_pci_host(struct pci_controller *hose) +{ + return ((in32(CONFIG_SYS_GPIO_BASE + 0x1C) & 0x00000800) == 0); +} +#endif /* defined(CONFIG_PCI) */ + +#ifdef CONFIG_POST +/* + * Returns 1 if keys pressed to start the power-on long-running tests + * Called from board_init_f(). + */ +int post_hotkeys_pressed(void) +{ + return ctrlc(); +} + +void post_word_store(ulong a) +{ + volatile ulong *save_addr = + (volatile ulong *)(CONFIG_SYS_POST_WORD_ADDR); + + *save_addr = a; +} + +ulong post_word_load(void) +{ + volatile ulong *save_addr = + (volatile ulong *)(CONFIG_SYS_POST_WORD_ADDR); + + return *save_addr; +} +#endif diff --git a/board/xpedite1k/flash.c b/board/xpedite1k/flash.c deleted file mode 100644 index 0711931..0000000 --- a/board/xpedite1k/flash.c +++ /dev/null @@ -1,607 +0,0 @@ -/* - * (C) Copyright 2002-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2002 Jun Gu <jung@artesyncp.com> - * Add support for Am29F016D and dynamic switch setting. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * Modified 4/5/2001 - * Wait for completion of each sector erase command issued - * 4/5/2001 - * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com - */ - -/* - * Ported to XPedite1000, 1/2 mb boot flash only - * Travis B. Sawyer, <travis.sawyer@sandburst.com> - */ - -#include <common.h> -#include <ppc4xx.h> -#include <asm/processor.h> - - -#undef DEBUG -#ifdef DEBUG -#define DEBUGF(x...) printf(x) -#else -#define DEBUGF(x...) -#endif /* DEBUG */ - -#define BOOT_SMALL_FLASH 32 /* 00100000 */ -#define FLASH_ONBD_N 2 /* 00000010 */ -#define FLASH_SRAM_SEL 1 /* 00000001 */ - -#define BOOT_SMALL_FLASH_VAL 4 -#define FLASH_ONBD_N_VAL 2 -#define FLASH_SRAM_SEL_VAL 1 - - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -static unsigned long flash_addr_table[8][CONFIG_SYS_MAX_FLASH_BANKS] = { - {0xfff80000}, /* 0:000: configuraton 3 */ - {0xfff90000}, /* 1:001: configuraton 4 */ - {0xfffa0000}, /* 2:010: configuraton 7 */ - {0xfffb0000}, /* 3:011: configuraton 8 */ - {0xfffc0000}, /* 4:100: configuraton 1 */ - {0xfffd0000}, /* 5:101: configuraton 2 */ - {0xfffe0000}, /* 6:110: configuraton 5 */ - {0xffff0000} /* 7:111: configuraton 6 */ -}; - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size (vu_long *addr, flash_info_t *info); -static int write_word (flash_info_t *info, ulong dest, ulong data); - - -#ifdef CONFIG_XPEDITE1K -#define ADDR0 0x5555 -#define ADDR1 0x2aaa -#define FLASH_WORD_SIZE unsigned char -#endif - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init (void) -{ - unsigned long total_b = 0; - unsigned long size_b[CONFIG_SYS_MAX_FLASH_BANKS]; - unsigned short index = 0; - int i; - - - DEBUGF("\n"); - DEBUGF("FLASH: Index: %d\n", index); - - /* Init: no FLASHes known */ - for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) { - flash_info[i].flash_id = FLASH_UNKNOWN; - flash_info[i].sector_count = -1; - flash_info[i].size = 0; - - /* check whether the address is 0 */ - if (flash_addr_table[index][i] == 0) { - continue; - } - - /* call flash_get_size() to initialize sector address */ - size_b[i] = flash_get_size( - (vu_long *)flash_addr_table[index][i], &flash_info[i]); - flash_info[i].size = size_b[i]; - if (flash_info[i].flash_id == FLASH_UNKNOWN) { - printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n", - i, size_b[i], size_b[i]<<20); - flash_info[i].sector_count = -1; - flash_info[i].size = 0; - } - - total_b += flash_info[i].size; - } - - return total_b; -} - - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t *info) -{ - int i; - int k; - int size; - int erased; - volatile unsigned long *flash; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: printf ("AMD "); break; - case FLASH_MAN_FUJ: printf ("FUJITSU "); break; - case FLASH_MAN_SST: printf ("SST "); break; - default: printf ("Unknown Vendor "); break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AMD016: printf ("AM29F016D (16 Mbit, uniform sector size)\n"); - break; - case FLASH_AM040: printf ("AM29F040 (512 Kbit, uniform sector size)\n"); - break; - case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n"); - break; - case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n"); - break; - case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n"); - break; - case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n"); - break; - case FLASH_SST800A: printf ("SST39LF/VF800 (8 Mbit, uniform sector size)\n"); - break; - case FLASH_SST160A: printf ("SST39LF/VF160 (16 Mbit, uniform sector size)\n"); - break; - default: printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld KB in %d Sectors\n", - info->size >> 10, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i=0; i<info->sector_count; ++i) { - /* - * Check if whole sector is erased - */ - if (i != (info->sector_count-1)) - size = info->start[i+1] - info->start[i]; - else - size = info->start[0] + info->size - info->start[i]; - erased = 1; - flash = (volatile unsigned long *)info->start[i]; - size = size >> 2; /* divide by 4 for longword access */ - for (k=0; k<size; k++) - { - if (*flash++ != 0xffffffff) - { - erased = 0; - break; - } - } - - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s%s", - info->start[i], - erased ? " E" : " ", - info->protect[i] ? "RO " : " " - ); - } - printf ("\n"); - return; - } - -/*----------------------------------------------------------------------- - */ - - -/*----------------------------------------------------------------------- - */ - -/* - * The following code cannot be run from FLASH! - */ -static ulong flash_get_size (vu_long *addr, flash_info_t *info) -{ - short i; - FLASH_WORD_SIZE value; - ulong base = (ulong)addr; - volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)addr; - - DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr ); - - /* Write auto select command: read Manufacturer ID */ - udelay(10000); - addr2[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; - udelay(1000); - addr2[ADDR1] = (FLASH_WORD_SIZE)0x00550055; - udelay(1000); - addr2[ADDR0] = (FLASH_WORD_SIZE)0x00900090; - udelay(1000); - -#ifdef CONFIG_ADCIOP - value = addr2[2]; -#else - value = addr2[0]; -#endif - - DEBUGF("FLASH MANUFACT: %x\n", value); - - switch (value) { - case (FLASH_WORD_SIZE)AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - break; - case (FLASH_WORD_SIZE)FUJ_MANUFACT: - info->flash_id = FLASH_MAN_FUJ; - break; - case (FLASH_WORD_SIZE)SST_MANUFACT: - info->flash_id = FLASH_MAN_SST; - break; - case (FLASH_WORD_SIZE)STM_MANUFACT: - info->flash_id = FLASH_MAN_STM; - break; - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* no or unknown flash */ - } - -#ifdef CONFIG_ADCIOP - value = addr2[0]; /* device ID */ - debug ("\ndev_code=%x\n", value); -#else - value = addr2[1]; /* device ID */ -#endif - - DEBUGF("\nFLASH DEVICEID: %x\n", value); - - switch (value) { - case (FLASH_WORD_SIZE)AMD_ID_LV040B: - info->flash_id += FLASH_AM040; - info->sector_count = 8; - info->size = 0x00080000; /* => 512 kb */ - break; - - default: - info->flash_id = FLASH_UNKNOWN; - return (0); /* => no or unknown flash */ - - } - - /* set up sector start address table */ - if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) || - (info->flash_id == FLASH_AM040) || - (info->flash_id == FLASH_AMD016)) { - for (i = 0; i < info->sector_count; i++) - info->start[i] = base + (i * 0x00010000); - } else { - if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00004000; - info->start[2] = base + 0x00006000; - info->start[3] = base + 0x00008000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = base + (i * 0x00010000) - 0x00030000; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00004000; - info->start[i--] = base + info->size - 0x00006000; - info->start[i--] = base + info->size - 0x00008000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00010000; - } - } - } - - /* check for protected sectors */ - for (i = 0; i < info->sector_count; i++) { - /* read sector protection at sector address, (A7 .. A0) = 0x02 */ - /* D0 = 1 if protected */ -#ifdef CONFIG_ADCIOP - addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]); - info->protect[i] = addr2[4] & 1; -#else - addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]); - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) - info->protect[i] = 0; - else - info->protect[i] = addr2[2] & 1; -#endif - } - - /* - * Prevent writes to uninitialized FLASH. - */ - if (info->flash_id != FLASH_UNKNOWN) { -#if 0 /* test-only */ -#ifdef CONFIG_ADCIOP - addr2 = (volatile unsigned char *)info->start[0]; - addr2[ADDR0] = 0xAA; - addr2[ADDR1] = 0x55; - addr2[ADDR0] = 0xF0; /* reset bank */ -#else - addr2 = (FLASH_WORD_SIZE *)info->start[0]; - *addr2 = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */ -#endif -#else /* test-only */ - addr2 = (FLASH_WORD_SIZE *)info->start[0]; - *addr2 = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */ -#endif /* test-only */ - } - - return (info->size); -} - -int wait_for_DQ7(flash_info_t *info, int sect) -{ - ulong start, now, last; - volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[sect]); - - start = get_timer (0); - last = start; - while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) { - if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - return -1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc ('.'); - last = now; - } - } - return 0; -} - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t *info, int s_first, int s_last) -{ - volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[0]); - volatile FLASH_WORD_SIZE *addr2; - int flag, prot, sect, l_sect; - int i; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("Can't erase unknown flash type - aborted\n"); - return 1; - } - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - l_sect = -1; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - addr2 = (FLASH_WORD_SIZE *)(info->start[sect]); - printf("Erasing sector %p\n", addr2); - - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) { - addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; - addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055; - addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080; - addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; - addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055; - addr2[0] = (FLASH_WORD_SIZE)0x00500050; /* block erase */ - for (i=0; i<50; i++) - udelay(1000); /* wait 1 ms */ - } else { - addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; - addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055; - addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080; - addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; - addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055; - addr2[0] = (FLASH_WORD_SIZE)0x00300030; /* sector erase */ - } - l_sect = sect; - /* - * Wait for each sector to complete, it's more - * reliable. According to AMD Spec, you must - * issue all erase commands within a specified - * timeout. This has been seen to fail, especially - * if printf()s are included (for debug)!! - */ - wait_for_DQ7(info, sect); - } - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* wait at least 80us - let's wait 1 ms */ - udelay (1000); - -#if 0 - /* - * We wait for the last triggered sector - */ - if (l_sect < 0) - goto DONE; - wait_for_DQ7(info, l_sect); - -DONE: -#endif - /* reset to read mode */ - addr = (FLASH_WORD_SIZE *)info->start[0]; - addr[0] = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */ - - printf (" done\n"); - return 0; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ - -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong cp, wp, data; - int i, l, rc; - - wp = (addr & ~3); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i=0, cp=wp; i<l; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - for (; i<4 && cnt>0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt==0 && i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - } - - /* - * handle word aligned part - */ - while (cnt >= 4) { - data = 0; - for (i=0; i<4; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - cnt -= 4; - } - - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - return (write_word(info, wp, data)); -} - -/*----------------------------------------------------------------------- - * Write a word to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_word (flash_info_t * info, ulong dest, ulong data) -{ - volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) (info->start[0]); - volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *) dest; - volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data; - ulong start; - int i; - - /* Check if Flash is (sufficiently) erased */ - if ((*((volatile FLASH_WORD_SIZE *) dest) & - (FLASH_WORD_SIZE) data) != (FLASH_WORD_SIZE) data) { - return (2); - } - - for (i = 0; i < 4 / sizeof (FLASH_WORD_SIZE); i++) { - int flag; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts (); - - addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA; - addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055; - addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00A000A0; - - dest2[i] = data2[i]; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts (); - - /* data polling for D7 */ - start = get_timer (0); - while ((dest2[i] & (FLASH_WORD_SIZE) 0x00800080) != - (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) { - - if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - return (1); - } - } - } - - return (0); -} - -/*----------------------------------------------------------------------- - */ diff --git a/board/xpedite1k/xpedite1k.c b/board/xpedite1k/xpedite1k.c deleted file mode 100644 index 044aeb9..0000000 --- a/board/xpedite1k/xpedite1k.c +++ /dev/null @@ -1,393 +0,0 @@ -/* - * Copyright (C) 2003 Travis B. Sawyer <travis.sawyer@sandburst.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - - -#include <common.h> -#include <asm/processor.h> -#include <spd_sdram.h> -#include <i2c.h> -#include <net.h> - -DECLARE_GLOBAL_DATA_PTR; - -#define BOOT_SMALL_FLASH 32 /* 00100000 */ -#define FLASH_ONBD_N 2 /* 00000010 */ -#define FLASH_SRAM_SEL 1 /* 00000001 */ - -long int fixed_sdram (void); - -int board_early_init_f(void) -{ - unsigned long sdrreg; - /* TBS: Setup the GPIO access for the user LEDs */ - mfsdr(sdr_pfc0, sdrreg); - mtsdr(sdr_pfc0, (sdrreg & ~0x00000100) | 0x00000E00); - out32(CONFIG_SYS_GPIO_BASE + 0x018, (USR_LED0 | USR_LED1 | USR_LED2 | USR_LED3)); - LED0_OFF(); - LED1_OFF(); - LED2_OFF(); - LED3_OFF(); - - /*-------------------------------------------------------------------- - * Setup the external bus controller/chip selects - *-------------------------------------------------------------------*/ - - /* set the bus controller */ - mtebc (pb0ap, 0x04055200); /* FLASH/SRAM */ - mtebc (pb0cr, 0xfff18000); /* BAS=0xfff 1MB R/W 8-bit */ - mtebc (pb1ap, 0x04055200); /* FLASH/SRAM */ - mtebc (pb1cr, 0xfe098000); /* BAS=0xff8 16MB R/W 8-bit */ - - /*-------------------------------------------------------------------- - * Setup the interrupt controller polarities, triggers, etc. - *-------------------------------------------------------------------*/ - /* - * Because of the interrupt handling rework to handle 440GX interrupts - * with the common code, we needed to change names of the UIC registers. - * Here the new relationship: - * - * U-Boot name 440GX name - * ----------------------- - * UIC0 UICB0 - * UIC1 UIC0 - * UIC2 UIC1 - * UIC3 UIC2 - */ - mtdcr (uic1sr, 0xffffffff); /* clear all */ - mtdcr (uic1er, 0x00000000); /* disable all */ - mtdcr (uic1cr, 0x00000003); /* SMI & UIC1 crit are critical */ - mtdcr (uic1pr, 0xfffffe00); /* per ref-board manual */ - mtdcr (uic1tr, 0x01c00000); /* per ref-board manual */ - mtdcr (uic1vr, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr (uic1sr, 0xffffffff); /* clear all */ - - mtdcr (uic2sr, 0xffffffff); /* clear all */ - mtdcr (uic2er, 0x00000000); /* disable all */ - mtdcr (uic2cr, 0x00000000); /* all non-critical */ - mtdcr (uic2pr, 0xffffc0ff); /* per ref-board manual */ - mtdcr (uic2tr, 0x00ff8000); /* per ref-board manual */ - mtdcr (uic2vr, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr (uic2sr, 0xffffffff); /* clear all */ - - mtdcr (uic3sr, 0xffffffff); /* clear all */ - mtdcr (uic3er, 0x00000000); /* disable all */ - mtdcr (uic3cr, 0x00000000); /* all non-critical */ - mtdcr (uic3pr, 0xffffffff); /* per ref-board manual */ - mtdcr (uic3tr, 0x00ff8c0f); /* per ref-board manual */ - mtdcr (uic3vr, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr (uic3sr, 0xffffffff); /* clear all */ - - mtdcr (uic0sr, 0xfc000000); /* clear all */ - mtdcr (uic0er, 0x00000000); /* disable all */ - mtdcr (uic0cr, 0x00000000); /* all non-critical */ - mtdcr (uic0pr, 0xfc000000); /* */ - mtdcr (uic0tr, 0x00000000); /* */ - mtdcr (uic0vr, 0x00000001); /* */ - - LED0_ON(); - - - return 0; -} - -int checkboard (void) -{ - printf ("Board: XES XPedite1000 440GX\n"); - - return (0); -} - - -phys_size_t initdram (int board_type) -{ - long dram_size = 0; - -#if defined(CONFIG_SPD_EEPROM) - dram_size = spd_sdram (); -#else - dram_size = fixed_sdram (); -#endif - return dram_size; -} - - -#if defined(CONFIG_SYS_DRAM_TEST) -int testdram (void) -{ - uint *pstart = (uint *) 0x00000000; - uint *pend = (uint *) 0x08000000; - uint *p; - - for (p = pstart; p < pend; p++) - *p = 0xaaaaaaaa; - - for (p = pstart; p < pend; p++) { - if (*p != 0xaaaaaaaa) { - printf ("SDRAM test fails at: %08x\n", (uint) p); - return 1; - } - } - - for (p = pstart; p < pend; p++) - *p = 0x55555555; - - for (p = pstart; p < pend; p++) { - if (*p != 0x55555555) { - printf ("SDRAM test fails at: %08x\n", (uint) p); - return 1; - } - } - return 0; -} -#endif - -#if !defined(CONFIG_SPD_EEPROM) -/************************************************************************* - * fixed sdram init -- doesn't use serial presence detect. - * - * Assumes: 128 MB, non-ECC, non-registered - * PLB @ 133 MHz - * - ************************************************************************/ -long int fixed_sdram (void) -{ - uint reg; - - /*-------------------------------------------------------------------- - * Setup some default - *------------------------------------------------------------------*/ - mtsdram (mem_uabba, 0x00000000); /* ubba=0 (default) */ - mtsdram (mem_slio, 0x00000000); /* rdre=0 wrre=0 rarw=0 */ - mtsdram (mem_devopt, 0x00000000); /* dll=0 ds=0 (normal) */ - mtsdram (mem_wddctr, 0x00000000); /* wrcp=0 dcd=0 */ - mtsdram (mem_clktr, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */ - - /*-------------------------------------------------------------------- - * Setup for board-specific specific mem - *------------------------------------------------------------------*/ - /* - * Following for CAS Latency = 2.5 @ 133 MHz PLB - */ - mtsdram (mem_b0cr, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */ - mtsdram (mem_tr0, 0x410a4012); /* WR=2 WD=1 CL=2.5 PA=3 CP=4 LD=2 */ - /* RA=10 RD=3 */ - mtsdram (mem_tr1, 0x8080082f); /* SS=T2 SL=STAGE 3 CD=1 CT=0x02f */ - mtsdram (mem_rtr, 0x08200000); /* Rate 15.625 ns @ 133 MHz PLB */ - mtsdram (mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM */ - udelay (400); /* Delay 200 usecs (min) */ - - /*-------------------------------------------------------------------- - * Enable the controller, then wait for DCEN to complete - *------------------------------------------------------------------*/ - mtsdram (mem_cfg0, 0x86000000); /* DCEN=1, PMUD=1, 64-bit */ - for (;;) { - mfsdram (mem_mcsts, reg); - if (reg & 0x80000000) - break; - } - - return (128 * 1024 * 1024); /* 128 MB */ -} -#endif /* !defined(CONFIG_SPD_EEPROM) */ - - -/************************************************************************* - * pci_pre_init - * - * This routine is called just prior to registering the hose and gives - * the board the opportunity to check things. Returning a value of zero - * indicates that things are bad & PCI initialization should be aborted. - * - * Different boards may wish to customize the pci controller structure - * (add regions, override default access routines, etc) or perform - * certain pre-initialization actions. - * - ************************************************************************/ -#if defined(CONFIG_PCI) -int pci_pre_init(struct pci_controller * hose ) -{ - unsigned long strap; - /* See if we're supposed to setup the pci */ - mfsdr(sdr_sdstp1, strap); - if ((strap & 0x00010000) == 0) { - return (0); - } - -#if defined(CONFIG_SYS_PCI_FORCE_PCI_CONV) - /* Setup System Device Register PCIX0_XCR */ - mfsdr(sdr_xcr, strap); - strap &= 0x0f000000; - mtsdr(sdr_xcr, strap); -#endif - return 1; -} -#endif /* defined(CONFIG_PCI) */ - -/************************************************************************* - * pci_target_init - * - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. - * - ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) -void pci_target_init(struct pci_controller * hose ) -{ - /*--------------------------------------------------------------------------+ - * Disable everything - *--------------------------------------------------------------------------*/ - out32r( PCIX0_PIM0SA, 0 ); /* disable */ - out32r( PCIX0_PIM1SA, 0 ); /* disable */ - out32r( PCIX0_PIM2SA, 0 ); /* disable */ - out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */ - - /*--------------------------------------------------------------------------+ - * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping - * options to not support sizes such as 128/256 MB. - *--------------------------------------------------------------------------*/ - out32r( PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE ); - out32r( PCIX0_PIM0LAH, 0 ); - out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 ); - - out32r( PCIX0_BAR0, 0 ); - - /*--------------------------------------------------------------------------+ - * Program the board's subsystem id/vendor id - *--------------------------------------------------------------------------*/ - out16r( PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID ); - out16r( PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID ); - - out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY ); -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ - - -/************************************************************************* - * is_pci_host - * - * This routine is called to determine if a pci scan should be - * performed. With various hardware environments (especially cPCI and - * PPMC) it's insufficient to depend on the state of the arbiter enable - * bit in the strap register, or generic host/adapter assumptions. - * - * Rather than hard-code a bad assumption in the general 440 code, the - * 440 pci code requires the board to decide at runtime. - * - * Return 0 for adapter mode, non-zero for host (monarch) mode. - * - * - ************************************************************************/ -#if defined(CONFIG_PCI) -int is_pci_host(struct pci_controller *hose) -{ - return ((in32(CONFIG_SYS_GPIO_BASE + 0x1C) & 0x00000800) == 0); -} -#endif /* defined(CONFIG_PCI) */ - -#ifdef CONFIG_POST -/* - * Returns 1 if keys pressed to start the power-on long-running tests - * Called from board_init_f(). - */ -int post_hotkeys_pressed(void) -{ - - return (ctrlc()); -} - -void post_word_store (ulong a) -{ - volatile ulong *save_addr = - (volatile ulong *)(CONFIG_SYS_POST_WORD_ADDR); - - *save_addr = a; -} - -ulong post_word_load (void) -{ - volatile ulong *save_addr = - (volatile ulong *)(CONFIG_SYS_POST_WORD_ADDR); - - return *save_addr; -} -#endif - -/*----------------------------------------------------------------------------- - * board_get_enetaddr -- Read the MAC Addresses in the I2C EEPROM - *----------------------------------------------------------------------------- - */ -static int read_i2c; -static void board_get_enetaddr(uchar *enet) -{ - int i; - unsigned char buff[0x100], *cp; - - if (read_i2c) - return; - - /* Initialize I2C */ - i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); - - /* Read 256 bytes in EEPROM */ - i2c_read (0x50, 0, 1, buff, 0x100); - - cp = &buff[0xF4]; - for (i = 0; i < 6; i++,cp++) - enet[i] = *cp; - - printf("MAC address = %pM\n", enet); - read_i2c = 1; -} - -int misc_init_r(void) -{ - uchar enetaddr[6], i2c_enetaddr[6]; - - if (!eth_getenv_enetaddr("ethaddr", enetaddr)) { - board_get_enetaddr(i2c_enetaddr); - eth_setenv_enetaddr("ethaddr", i2c_enetaddr); - } - -#ifdef CONFIG_HAS_ETH1 - if (!eth_getenv_enetaddr("eth1addr", enetaddr)) { - board_get_enetaddr(i2c_enetaddr); - eth_setenv_enetaddr("eth1addr", i2c_enetaddr); - } -#endif - -#ifdef CONFIG_HAS_ETH2 - if (!eth_getenv_enetaddr("eth2addr", enetaddr)) { - board_get_enetaddr(i2c_enetaddr); - eth_setenv_enetaddr("eth2addr", i2c_enetaddr); - } -#endif - -#ifdef CONFIG_HAS_ETH3 - if (!eth_getenv_enetaddr("eth3addr", enetaddr)) { - board_get_enetaddr(i2c_enetaddr); - eth_setenv_enetaddr("eth3addr", i2c_enetaddr); - } -#endif - - return 0; -} diff --git a/cpu/ppc4xx/Makefile b/cpu/ppc4xx/Makefile index 6f52dfd..2050b17 100644 --- a/cpu/ppc4xx/Makefile +++ b/cpu/ppc4xx/Makefile @@ -41,6 +41,9 @@ endif COBJS += 4xx_pci.o COBJS += 4xx_pcie.o COBJS += bedbug_405.o +ifdef CONFIG_CMD_CHIP_CONFIG +COBJS += cmd_chip_config.o +endif COBJS += commproc.o COBJS += cpu.o COBJS += cpu_init.o diff --git a/cpu/ppc4xx/cmd_chip_config.c b/cpu/ppc4xx/cmd_chip_config.c new file mode 100644 index 0000000..d360d5b --- /dev/null +++ b/cpu/ppc4xx/cmd_chip_config.c @@ -0,0 +1,142 @@ +/* + * (C) Copyright 2008-2009 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * (C) Copyright 2009 + * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include <common.h> +#include <command.h> +#include <i2c.h> +#include <asm/ppc4xx_config.h> +#include <asm/io.h> + +static void print_configs(int cur_config_nr) +{ + int i; + + for (i = 0; i < ppc4xx_config_count; i++) { + printf("%-16s - %s", ppc4xx_config_val[i].label, + ppc4xx_config_val[i].description); + if (i == cur_config_nr) + printf(" ***"); + printf("\n"); + } + +} + +static int do_chip_config(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + int i; + int ret; + int cur_config_nr = -1; + u8 cur_config[CONFIG_4xx_CONFIG_BLOCKSIZE]; + +#ifdef CONFIG_CMD_EEPROM + ret = eeprom_read(CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR, + CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET, + cur_config, CONFIG_4xx_CONFIG_BLOCKSIZE); +#else + ret = i2c_read(CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR, + CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET, + 1, cur_config, CONFIG_4xx_CONFIG_BLOCKSIZE); +#endif + if (ret) { + printf("Error reading EEPROM at addr 0x%x\n", + CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR); + return -1; + } + + /* + * Search the current configuration + */ + for (i = 0; i < ppc4xx_config_count; i++) { + if (memcmp(cur_config, ppc4xx_config_val[i].val, + CONFIG_4xx_CONFIG_BLOCKSIZE) == 0) + cur_config_nr = i; + } + + if (cur_config_nr == -1) { + printf("Warning: The I2C bootstrap values don't match any" + " of the available options!\n"); + printf("I2C bootstrap EEPROM values are (I2C address 0x%02x):\n", + CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR); + for (i = 0; i < CONFIG_4xx_CONFIG_BLOCKSIZE; i++) { + printf("%02x ", cur_config[i]); + } + printf("\n"); + } + + if (argc < 2) { + printf("Available configurations (I2C address 0x%02x):\n", + CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR); + print_configs(cur_config_nr); + return 0; + } + + for (i = 0; i < ppc4xx_config_count; i++) { + /* + * Search for configuration name/label + */ + if (strcmp(argv[1], ppc4xx_config_val[i].label) == 0) { + printf("Using configuration:\n%-16s - %s\n", + ppc4xx_config_val[i].label, + ppc4xx_config_val[i].description); + +#ifdef CONFIG_CMD_EEPROM + ret = eeprom_write(CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR, + CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET, + ppc4xx_config_val[i].val, + CONFIG_4xx_CONFIG_BLOCKSIZE); +#else + ret = i2c_write(CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR, + CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET, + 1, ppc4xx_config_val[i].val, + CONFIG_4xx_CONFIG_BLOCKSIZE); +#endif + udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000); + if (ret) { + printf("Error updating EEPROM at addr 0x%x\n", + CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR); + return -1; + } + + printf("done (dump via 'i2c md %x 0.1 %x')\n", + CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR, + CONFIG_4xx_CONFIG_BLOCKSIZE); + printf("Reset the board for the changes to" + " take effect\n"); + return 0; + } + } + + printf("Configuration %s not found!\n", argv[1]); + print_configs(cur_config_nr); + return -1; +} + +U_BOOT_CMD( + chip_config, 2, 0, do_chip_config, + "program the I2C bootstrap EEPROM", + "[config-label]" +); diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c index fb3837c..e12a784 100644 --- a/cpu/ppc4xx/cpu.c +++ b/cpu/ppc4xx/cpu.c @@ -272,7 +272,7 @@ static int do_chip_reset (unsigned long sys0, unsigned long sys1) mtdcr (cpc0_sys0, sys0); mtdcr (cpc0_sys1, sys1); mtdcr (cntrl0, mfdcr (cntrl0) & ~0x80000000); /* Clr SWE */ - mtspr (dbcr0, 0x20000000); /* Reset the chip */ + mtspr (SPRN_DBCR0, 0x20000000); /* Reset the chip */ return 1; } @@ -654,12 +654,12 @@ int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) board_reset(); #else #if defined(CONFIG_SYS_4xx_RESET_TYPE) - mtspr(dbcr0, CONFIG_SYS_4xx_RESET_TYPE << 28); + mtspr(SPRN_DBCR0, CONFIG_SYS_4xx_RESET_TYPE << 28); #else /* * Initiate system reset in debug control register DBCR */ - mtspr(dbcr0, 0x30000000); + mtspr(SPRN_DBCR0, 0x30000000); #endif /* defined(CONFIG_SYS_4xx_RESET_TYPE) */ #endif /* defined(CONFIG_BOARD_RESET) */ @@ -697,7 +697,7 @@ void reset_4xx_watchdog(void) /* * Clear TSR(WIS) bit */ - mtspr(tsr, 0x40000000); + mtspr(SPRN_TSR, 0x40000000); } #endif /* CONFIG_WATCHDOG */ diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c index bbd795d..65092fb 100644 --- a/cpu/ppc4xx/cpu_init.c +++ b/cpu/ppc4xx/cpu_init.c @@ -123,7 +123,7 @@ void reconfigure_pll(u32 new_cpu_freq) /* Reset processor if configuration changed */ if (reset_needed) { __asm__ __volatile__ ("sync; isync"); - mtspr(dbcr0, 0x20000000); + mtspr(SPRN_DBCR0, 0x20000000); } #endif } diff --git a/cpu/ppc4xx/interrupts.c b/cpu/ppc4xx/interrupts.c index 494bd8c..6db8421 100644 --- a/cpu/ppc4xx/interrupts.c +++ b/cpu/ppc4xx/interrupts.c @@ -102,15 +102,15 @@ int interrupt_init_cpu (unsigned *decrementer_count) * Init PIT */ #if defined(CONFIG_440) - val = mfspr( tcr ); + val = mfspr( SPRN_TCR ); val &= (~0x04400000); /* clear DIS & ARE */ - mtspr( tcr, val ); - mtspr( dec, 0 ); /* Prevent exception after TSR clear*/ - mtspr( decar, 0 ); /* clear reload */ - mtspr( tsr, 0x08000000 ); /* clear DEC status */ + mtspr( SPRN_TCR, val ); + mtspr( SPRN_DEC, 0 ); /* Prevent exception after TSR clear*/ + mtspr( SPRN_DECAR, 0 ); /* clear reload */ + mtspr( SPRN_TSR, 0x08000000 ); /* clear DEC status */ val = gd->bd->bi_intfreq/1000; /* 1 msec */ - mtspr( decar, val ); /* Set auto-reload value */ - mtspr( dec, val ); /* Set inital val */ + mtspr( SPRN_DECAR, val ); /* Set auto-reload value */ + mtspr( SPRN_DEC, val ); /* Set inital val */ #else set_pit(gd->bd->bi_intfreq / 1000); #endif @@ -126,9 +126,9 @@ int interrupt_init_cpu (unsigned *decrementer_count) /* * Enable PIT */ - val = mfspr(tcr); + val = mfspr(SPRN_TCR); val |= 0x04400000; - mtspr(tcr, val); + mtspr(SPRN_TCR, val); /* * Set EVPR to 0 diff --git a/cpu/ppc4xx/speed.c b/cpu/ppc4xx/speed.c index ed6e55b..c0a5824 100644 --- a/cpu/ppc4xx/speed.c +++ b/cpu/ppc4xx/speed.c @@ -394,7 +394,8 @@ void get_sys_info (sys_info_t *sysInfo) sysInfo->freqUART = sysInfo->freqPLB; /* Figure which timer source to use */ - if (mfspr(ccr1) & 0x0080) { /* External Clock, assume same as SYS_CLK */ + if (mfspr(SPRN_CCR1) & 0x0080) { + /* External Clock, assume same as SYS_CLK */ temp = sysInfo->freqProcessor / 2; /* Max extern clock speed */ if (CONFIG_SYS_CLK_FREQ > temp) sysInfo->freqTmrClk = temp; @@ -867,6 +868,8 @@ void get_sys_info (PPC4xx_SYS_INFO * sysInfo) sysInfo->freqEBC = sysInfo->freqPLB / sysInfo->pllExtBusDiv; + sysInfo->freqOPB = sysInfo->freqPLB / sysInfo->pllOpbDiv; + sysInfo->freqUART = sysInfo->freqProcessor * pllmr0_ccdv; } diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S index 582c781..60756c3 100644 --- a/cpu/ppc4xx/start.S +++ b/cpu/ppc4xx/start.S @@ -297,7 +297,7 @@ _start_440: | Core bug fix. Clear the esr +-----------------------------------------------------------------*/ li r0,0 - mtspr esr,r0 + mtspr SPRN_ESR,r0 /*----------------------------------------------------------------*/ /* Clear and set up some registers. */ /*----------------------------------------------------------------*/ @@ -305,16 +305,16 @@ _start_440: dccci r0,r0 /* NOTE: operands not used for 440 */ sync li r0,0 - mtspr srr0,r0 - mtspr srr1,r0 - mtspr csrr0,r0 - mtspr csrr1,r0 + mtspr SPRN_SRR0,r0 + mtspr SPRN_SRR1,r0 + mtspr SPRN_CSRR0,r0 + mtspr SPRN_CSRR1,r0 /* NOTE: 440GX adds machine check status regs */ #if defined(CONFIG_440) && !defined(CONFIG_440GP) - mtspr mcsrr0,r0 - mtspr mcsrr1,r0 - mfspr r1,mcsr - mtspr mcsr,r1 + mtspr SPRN_MCSRR0,r0 + mtspr SPRN_MCSRR1,r0 + mfspr r1,SPRN_MCSR + mtspr SPRN_MCSR,r1 #endif /*----------------------------------------------------------------*/ @@ -326,27 +326,27 @@ _start_440: */ lis r1,0x0030 /* store gathering & broadcast disable */ ori r1,r1,0x6000 /* cache touch */ - mtspr ccr0,r1 + mtspr SPRN_CCR0,r1 /*----------------------------------------------------------------*/ /* Initialize debug */ /*----------------------------------------------------------------*/ - mfspr r1,dbcr0 + mfspr r1,SPRN_DBCR0 andis. r1, r1, 0x8000 /* test DBCR0[EDM] bit */ bne skip_debug_init /* if set, don't clear debug register */ - mtspr dbcr0,r0 - mtspr dbcr1,r0 - mtspr dbcr2,r0 - mtspr iac1,r0 - mtspr iac2,r0 - mtspr iac3,r0 - mtspr dac1,r0 - mtspr dac2,r0 - mtspr dvc1,r0 - mtspr dvc2,r0 - - mfspr r1,dbsr - mtspr dbsr,r1 /* Clear all valid bits */ + mtspr SPRN_DBCR0,r0 + mtspr SPRN_DBCR1,r0 + mtspr SPRN_DBCR2,r0 + mtspr SPRN_IAC1,r0 + mtspr SPRN_IAC2,r0 + mtspr SPRN_IAC3,r0 + mtspr SPRN_DAC1,r0 + mtspr SPRN_DAC2,r0 + mtspr SPRN_DVC1,r0 + mtspr SPRN_DVC2,r0 + + mfspr r1,SPRN_DBSR + mtspr SPRN_DBSR,r1 /* Clear all valid bits */ skip_debug_init: #if defined (CONFIG_440SPE) @@ -364,68 +364,68 @@ skip_debug_init: | j. TCS: Timebase increments from CPU clock. +-----------------------------------------------------------------*/ li r0,0 - mtspr ccr1, r0 + mtspr SPRN_CCR1, r0 /*----------------------------------------------------------------+ | Reset the timebase. | The previous write to CCR1 sets the timebase source. +-----------------------------------------------------------------*/ - mtspr tbl, r0 - mtspr tbu, r0 + mtspr SPRN_TBWL, r0 + mtspr SPRN_TBWU, r0 #endif /*----------------------------------------------------------------*/ /* Setup interrupt vectors */ /*----------------------------------------------------------------*/ - mtspr ivpr,r0 /* Vectors start at 0x0000_0000 */ + mtspr SPRN_IVPR,r0 /* Vectors start at 0x0000_0000 */ li r1,0x0100 - mtspr ivor0,r1 /* Critical input */ + mtspr SPRN_IVOR0,r1 /* Critical input */ li r1,0x0200 - mtspr ivor1,r1 /* Machine check */ + mtspr SPRN_IVOR1,r1 /* Machine check */ li r1,0x0300 - mtspr ivor2,r1 /* Data storage */ + mtspr SPRN_IVOR2,r1 /* Data storage */ li r1,0x0400 - mtspr ivor3,r1 /* Instruction storage */ + mtspr SPRN_IVOR3,r1 /* Instruction storage */ li r1,0x0500 - mtspr ivor4,r1 /* External interrupt */ + mtspr SPRN_IVOR4,r1 /* External interrupt */ li r1,0x0600 - mtspr ivor5,r1 /* Alignment */ + mtspr SPRN_IVOR5,r1 /* Alignment */ li r1,0x0700 - mtspr ivor6,r1 /* Program check */ + mtspr SPRN_IVOR6,r1 /* Program check */ li r1,0x0800 - mtspr ivor7,r1 /* Floating point unavailable */ + mtspr SPRN_IVOR7,r1 /* Floating point unavailable */ li r1,0x0c00 - mtspr ivor8,r1 /* System call */ + mtspr SPRN_IVOR8,r1 /* System call */ li r1,0x0a00 - mtspr ivor9,r1 /* Auxiliary Processor unavailable */ + mtspr SPRN_IVOR9,r1 /* Auxiliary Processor unavailable */ li r1,0x0900 - mtspr ivor10,r1 /* Decrementer */ + mtspr SPRN_IVOR10,r1 /* Decrementer */ li r1,0x1300 - mtspr ivor13,r1 /* Data TLB error */ + mtspr SPRN_IVOR13,r1 /* Data TLB error */ li r1,0x1400 - mtspr ivor14,r1 /* Instr TLB error */ + mtspr SPRN_IVOR14,r1 /* Instr TLB error */ li r1,0x2000 - mtspr ivor15,r1 /* Debug */ + mtspr SPRN_IVOR15,r1 /* Debug */ /*----------------------------------------------------------------*/ /* Configure cache regions */ /*----------------------------------------------------------------*/ - mtspr inv0,r0 - mtspr inv1,r0 - mtspr inv2,r0 - mtspr inv3,r0 - mtspr dnv0,r0 - mtspr dnv1,r0 - mtspr dnv2,r0 - mtspr dnv3,r0 - mtspr itv0,r0 - mtspr itv1,r0 - mtspr itv2,r0 - mtspr itv3,r0 - mtspr dtv0,r0 - mtspr dtv1,r0 - mtspr dtv2,r0 - mtspr dtv3,r0 + mtspr SPRN_INV0,r0 + mtspr SPRN_INV1,r0 + mtspr SPRN_INV2,r0 + mtspr SPRN_INV3,r0 + mtspr SPRN_DNV0,r0 + mtspr SPRN_DNV1,r0 + mtspr SPRN_DNV2,r0 + mtspr SPRN_DNV3,r0 + mtspr SPRN_ITV0,r0 + mtspr SPRN_ITV1,r0 + mtspr SPRN_ITV2,r0 + mtspr SPRN_ITV3,r0 + mtspr SPRN_DTV0,r0 + mtspr SPRN_DTV1,r0 + mtspr SPRN_DTV2,r0 + mtspr SPRN_DTV3,r0 /*----------------------------------------------------------------*/ /* Cache victim limits */ @@ -434,25 +434,30 @@ skip_debug_init: */ lis r1,0x0001 ori r1,r1,0xf800 - mtspr ivlim,r1 - mtspr dvlim,r1 + mtspr SPRN_IVLIM,r1 + mtspr SPRN_DVLIM,r1 /*----------------------------------------------------------------+ |Initialize MMUCR[STID] = 0. +-----------------------------------------------------------------*/ - mfspr r0,mmucr + mfspr r0,SPRN_MMUCR addis r1,0,0xFFFF ori r1,r1,0xFF00 and r0,r0,r1 - mtspr mmucr,r0 + mtspr SPRN_MMUCR,r0 /*----------------------------------------------------------------*/ /* Clear all TLB entries -- TID = 0, TS = 0 */ /*----------------------------------------------------------------*/ addis r0,0,0x0000 - li r1,0x003f /* 64 TLB entries */ - mtctr r1 +#ifdef CONFIG_SYS_RAMBOOT li r4,0 /* Start with TLB #0 */ +#else + li r4,1 /* Start with TLB #1 */ +#endif + li r1,64 /* 64 TLB entries */ + sub r1,r1,r4 /* calculate last TLB # */ + mtctr r1 rsttlb: #ifdef CONFIG_SYS_RAMBOOT tlbre r3,r4,0 /* Read contents from TLB word #0 to get EPN */ @@ -516,9 +521,9 @@ tlbnx2: addi r4,r4,1 /* Next TLB */ b _start 3: li r0,0 - mtspr srr1,r0 /* Keep things disabled for now */ + mtspr SPRN_SRR1,r0 /* Keep things disabled for now */ mflr r1 - mtspr srr0,r1 + mtspr SPRN_SRR0,r1 rfi #endif /* CONFIG_440 */ @@ -622,12 +627,12 @@ _start: /*----------------------------------------------------------------*/ li r0,0x0000 lis r1,0xffff - mtspr dec,r0 /* prevent dec exceptions */ - mtspr tbl,r0 /* prevent fit & wdt exceptions */ - mtspr tbu,r0 - mtspr tsr,r1 /* clear all timer exception status */ - mtspr tcr,r0 /* disable all */ - mtspr esr,r0 /* clear exception syndrome register */ + mtspr SPRN_DEC,r0 /* prevent dec exceptions */ + mtspr SPRN_TBWL,r0 /* prevent fit & wdt exceptions */ + mtspr SPRN_TBWU,r0 + mtspr SPRN_TSR,r1 /* clear all timer exception status */ + mtspr SPRN_TCR,r0 /* disable all */ + mtspr SPRN_ESR,r0 /* clear exception syndrome register */ mtxer r0 /* clear integer exception register */ /*----------------------------------------------------------------*/ @@ -638,10 +643,10 @@ _start: #if defined(CONFIG_SYS_INIT_DBCR) lis r1,0xffff ori r1,r1,0xffff - mtspr dbsr,r1 /* Clear all status bits */ + mtspr SPRN_DBSR,r1 /* Clear all status bits */ lis r0,CONFIG_SYS_INIT_DBCR@h ori r0,r0,CONFIG_SYS_INIT_DBCR@l - mtspr dbcr0,r0 + mtspr SPRN_DBCR0,r0 isync #endif @@ -680,17 +685,17 @@ _start: /* 8. set TFLOOR/NFLOOR to 8 (-> 8*16*32 bytes locked -> 4k) */ lis r1,0x0201 ori r1,r1,0xf808 - mtspr dvlim,r1 + mtspr SPRN_DVLIM,r1 lis r1,0x0808 ori r1,r1,0x0808 - mtspr dnv0,r1 - mtspr dnv1,r1 - mtspr dnv2,r1 - mtspr dnv3,r1 - mtspr dtv0,r1 - mtspr dtv1,r1 - mtspr dtv2,r1 - mtspr dtv3,r1 + mtspr SPRN_DNV0,r1 + mtspr SPRN_DNV1,r1 + mtspr SPRN_DNV2,r1 + mtspr SPRN_DNV3,r1 + mtspr SPRN_DTV0,r1 + mtspr SPRN_DTV1,r1 + mtspr SPRN_DTV2,r1 + mtspr SPRN_DTV3,r1 msync isync #endif /* CONFIG_SYS_INIT_RAM_DCACHE */ @@ -809,7 +814,7 @@ _start: /* Set up some machine state registers. */ /*----------------------------------------------------------------------- */ addi r0,r0,0x0000 /* initialize r0 to zero */ - mtspr esr,r0 /* clear Exception Syndrome Reg */ + mtspr SPRN_ESR,r0 /* clear Exception Syndrome Reg */ mttcr r0 /* timer control register */ mtexier r0 /* disable all interrupts */ addis r4,r0,0xFFFF /* set r4 to 0xFFFFFFFF (status in the */ @@ -919,7 +924,7 @@ _start: /*----------------------------------------------------------------------- */ addi r4,r0,0x0000 #if !defined(CONFIG_405EX) - mtspr sgr,r4 + mtspr SPRN_SGR,r4 #else /* * On 405EX, completely clearing the SGR leads to PPC hangup @@ -928,9 +933,9 @@ _start: */ lis r3,0x0000 ori r3,r3,0x7FFC - mtspr sgr,r3 + mtspr SPRN_SGR,r3 #endif - mtspr dcwr,r4 + mtspr SPRN_DCWR,r4 mtesr r4 /* clear Exception Syndrome Reg */ mttcr r4 /* clear Timer Control Reg */ mtxer r4 /* clear Fixed-Point Exception Reg */ @@ -1266,8 +1271,8 @@ crit_return: REST_GPR(31, r1) lwz r2,_NIP(r1) /* Restore environment */ lwz r0,_MSR(r1) - mtspr csrr0,r2 - mtspr csrr1,r0 + mtspr SPRN_CSRR0,r2 + mtspr SPRN_CSRR1,r0 lwz r0,GPR0(r1) lwz r2,GPR2(r1) lwz r1,GPR1(r1) @@ -1297,8 +1302,8 @@ mck_return: REST_GPR(31, r1) lwz r2,_NIP(r1) /* Restore environment */ lwz r0,_MSR(r1) - mtspr mcsrr0,r2 - mtspr mcsrr1,r0 + mtspr SPRN_MCSRR0,r2 + mtspr SPRN_MCSRR1,r0 lwz r0,GPR0(r1) lwz r2,GPR2(r1) lwz r1,GPR1(r1) @@ -1448,17 +1453,17 @@ relocate_code: /* set TFLOOR/NFLOOR to 0 again */ lis r6,0x0001 ori r6,r6,0xf800 - mtspr dvlim,r6 + mtspr SPRN_DVLIM,r6 lis r6,0x0000 ori r6,r6,0x0000 - mtspr dnv0,r6 - mtspr dnv1,r6 - mtspr dnv2,r6 - mtspr dnv3,r6 - mtspr dtv0,r6 - mtspr dtv1,r6 - mtspr dtv2,r6 - mtspr dtv3,r6 + mtspr SPRN_DNV0,r6 + mtspr SPRN_DNV1,r6 + mtspr SPRN_DNV2,r6 + mtspr SPRN_DNV3,r6 + mtspr SPRN_DTV0,r6 + mtspr SPRN_DTV1,r6 + mtspr SPRN_DTV2,r6 + mtspr SPRN_DTV3,r6 msync isync #endif /* CONFIG_SYS_INIT_RAM_DCACHE */ @@ -1478,8 +1483,8 @@ relocate_code: isync /* Clear all potential pending exceptions */ - mfspr r1,mcsr - mtspr mcsr,r1 + mfspr r1,SPRN_MCSR + mtspr SPRN_MCSR,r1 #ifdef CONFIG_SYS_TLB_FOR_BOOT_FLASH addi r1,r0,CONFIG_SYS_TLB_FOR_BOOT_FLASH /* Use defined TLB */ #else @@ -1723,9 +1728,9 @@ trap_init: __440_msr_set: addi r7,r0,0x1000 /* set ME bit (Machine Exceptions) */ oris r7,r7,0x0002 /* set CE bit (Critical Exceptions) */ - mtspr srr1,r7 + mtspr SPRN_SRR1,r7 mflr r7 - mtspr srr0,r7 + mtspr SPRN_SRR0,r7 rfi __440_msr_continue: #endif @@ -2059,7 +2064,7 @@ pll_wait: * Not sure if this is needed... */ addis r3,0,0x1000 - mtspr dbcr0,r3 /* This will cause a CPU core reset, and */ + mtspr SPRN_DBCR0,r3 /* This will cause a CPU core reset, and */ /* execution will continue from the poweron */ /* vector of 0xfffffffc */ #endif /* CONFIG_405EP */ diff --git a/include/asm-ppc/gpio.h b/include/asm-ppc/gpio.h index fc05dc0..23e29b1 100644 --- a/include/asm-ppc/gpio.h +++ b/include/asm-ppc/gpio.h @@ -24,6 +24,8 @@ #ifndef __ASM_PPC_GPIO_H #define __ASM_PPC_GPIO_H +#include <asm/types.h> + /* 4xx PPC's have 2 GPIO controllers */ #if defined(CONFIG_405EZ) || \ defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ @@ -34,6 +36,28 @@ #define GPIO_GROUP_MAX 1 #endif +/* GPIO controller */ +struct ppc4xx_gpio { + u32 or; /* Output Control */ + u32 tcr; /* Tri-State Control */ + u32 osl; /* Output Select 16..31 */ + u32 osh; /* Output Select 0..15 */ + u32 tsl; /* Tri-State Select 16..31 */ + u32 tsh; /* Tri-State Select 0..15 */ + u32 odr; /* Open Drain */ + u32 ir; /* Input */ + u32 rr1; /* Receive Register 1 */ + u32 rr2; /* Receive Register 2 */ + u32 rr3; /* Receive Register 3 */ + u32 reserved; + u32 is1l; /* Input Select 1 16..31 */ + u32 is1h; /* Input Select 1 0..15 */ + u32 is2l; /* Input Select 2 16..31 */ + u32 is2h; /* Input Select 2 0..15 */ + u32 is3l; /* Input Select 3 16..31 */ + u32 is3h; /* Input Select 3 0..15 */ +}; + /* Offsets */ #define GPIOx_OR 0x00 /* GPIO Output Register */ #define GPIOx_TCR 0x04 /* GPIO Three-State Control Register */ diff --git a/include/asm-ppc/ppc4xx_config.h b/include/asm-ppc/ppc4xx_config.h new file mode 100644 index 0000000..49acb60 --- /dev/null +++ b/include/asm-ppc/ppc4xx_config.h @@ -0,0 +1,42 @@ +/* + * (C) Copyright 2008-2009 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * (C) Copyright 2009 + * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#ifndef __PPC4xx_CONFIG_H +#define __PPC4xx_CONFIG_H + +#include <common.h> + +struct ppc4xx_config { + char label[16]; + char description[64]; + u8 val[CONFIG_4xx_CONFIG_BLOCKSIZE]; +}; + +extern struct ppc4xx_config ppc4xx_config_val[]; +extern int ppc4xx_config_count; + +#endif /* __PPC4xx_CONFIG_H */ diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h index 65546ad..2c0c0ce 100644 --- a/include/asm-ppc/processor.h +++ b/include/asm-ppc/processor.h @@ -96,6 +96,10 @@ #define CONFIG_BOOKE #endif +#define SPRN_CCR0 0x3B3 /* Core Configuration Register 0 */ +#ifdef CONFIG_BOOKE +#define SPRN_CCR1 0x378 /* Core Configuration Register for 440 only */ +#endif #define SPRN_CDBCR 0x3D7 /* Cache Debug Control Register */ #define SPRN_CTR 0x009 /* Count Register */ #define SPRN_DABR 0x3F5 /* Data Address Breakpoint Register */ @@ -166,6 +170,9 @@ #define SPRN_DBSR 0x3F0 /* Debug Status Register */ #else #define SPRN_DBCR1 0x135 /* Book E Debug Control Register 1 */ +#ifdef CONFIG_BOOKE +#define SPRN_DBDR 0x3f3 /* Debug Data Register */ +#endif #define SPRN_DBSR 0x130 /* Book E Debug Status Register */ #define DBSR_IC 0x08000000 /* Book E Instruction Completion */ #define DBSR_TIE 0x01000000 /* Book E Trap Instruction Event */ @@ -173,6 +180,10 @@ #define SPRN_DCCR 0x3FA /* Data Cache Cacheability Register */ #define DCCR_NOCACHE 0 /* Noncacheable */ #define DCCR_CACHE 1 /* Cacheable */ +#ifndef CONFIG_BOOKE +#define SPRN_DCDBTRL 0x39c /* Data Cache Debug Tag Register Low */ +#define SPRN_DCDBTRH 0x39d /* Data Cache Debug Tag Register High */ +#endif #define SPRN_DCMP 0x3D1 /* Data TLB Compare Register */ #define SPRN_DCWR 0x3BA /* Data Cache Write-thru Register */ #define DCWR_COPY 0 /* Copy-back */ @@ -184,7 +195,20 @@ #endif /* CONFIG_BOOKE */ #define SPRN_DEC 0x016 /* Decrement Register */ #define SPRN_DMISS 0x3D0 /* Data TLB Miss Register */ +#ifdef CONFIG_BOOKE +#define SPRN_DNV0 0x390 /* Data Cache Normal Victim 0 */ +#define SPRN_DNV1 0x391 /* Data Cache Normal Victim 1 */ +#define SPRN_DNV2 0x392 /* Data Cache Normal Victim 2 */ +#define SPRN_DNV3 0x393 /* Data Cache Normal Victim 3 */ +#endif #define SPRN_DSISR 0x012 /* Data Storage Interrupt Status Register */ +#ifdef CONFIG_BOOKE +#define SPRN_DTV0 0x394 /* Data Cache Transient Victim 0 */ +#define SPRN_DTV1 0x395 /* Data Cache Transient Victim 1 */ +#define SPRN_DTV2 0x396 /* Data Cache Transient Victim 2 */ +#define SPRN_DTV3 0x397 /* Data Cache Transient Victim 3 */ +#define SPRN_DVLIM 0x398 /* Data Cache Victim Limit */ +#endif #define SPRN_EAR 0x11A /* External Address Register */ #ifndef CONFIG_BOOKE #define SPRN_ESR 0x3D4 /* Exception Syndrome Register */ @@ -269,16 +293,34 @@ #define ICCR_NOCACHE 0 /* Noncacheable */ #define ICCR_CACHE 1 /* Cacheable */ #define SPRN_ICDBDR 0x3D3 /* Instruction Cache Debug Data Register */ +#ifdef CONFIG_BOOKE +#define SPRN_ICDBTRL 0x39e /* instruction cache debug tag register low */ +#define SPRN_ICDBTRH 0x39f /* instruction cache debug tag register high */ +#endif #define SPRN_ICMP 0x3D5 /* Instruction TLB Compare Register */ #define SPRN_ICTC 0x3FB /* Instruction Cache Throttling Control Reg */ #define SPRN_IMISS 0x3D4 /* Instruction TLB Miss Register */ #define SPRN_IMMR 0x27E /* Internal Memory Map Register */ +#ifdef CONFIG_BOOKE +#define SPRN_INV0 0x370 /* Instruction Cache Normal Victim 0 */ +#define SPRN_INV1 0x371 /* Instruction Cache Normal Victim 1 */ +#define SPRN_INV2 0x372 /* Instruction Cache Normal Victim 2 */ +#define SPRN_INV3 0x373 /* Instruction Cache Normal Victim 3 */ +#define SPRN_ITV0 0x374 /* Instruction Cache Transient Victim 0 */ +#define SPRN_ITV1 0x375 /* Instruction Cache Transient Victim 1 */ +#define SPRN_ITV2 0x376 /* Instruction Cache Transient Victim 2 */ +#define SPRN_ITV3 0x377 /* Instruction Cache Transient Victim 3 */ +#define SPRN_IVLIM 0x399 /* Instruction Cache Victim Limit */ +#endif #define SPRN_LDSTCR 0x3F8 /* Load/Store Control Register */ #define SPRN_L2CR 0x3F9 /* Level 2 Cache Control Regsiter */ #define SPRN_LR 0x008 /* Link Register */ #define SPRN_MBAR 0x137 /* System memory base address */ #define SPRN_MMCR0 0x3B8 /* Monitor Mode Control Register 0 */ #define SPRN_MMCR1 0x3BC /* Monitor Mode Control Register 1 */ +#ifdef CONFIG_BOOKE +#define SPRN_MMUCR 0x3b2 /* MMU Control Register */ +#endif #define SPRN_PBL1 0x3FC /* Protection Bound Lower 1 */ #define SPRN_PBL2 0x3FE /* Protection Bound Lower 2 */ #define SPRN_PBU1 0x3FD /* Protection Bound Upper 1 */ @@ -297,6 +339,9 @@ #define SPRN_PMC4 0x3BE /* Performance Counter Register 4 */ #define SPRN_PVR 0x11F /* Processor Version Register */ #define SPRN_RPA 0x3D6 /* Required Physical Address Register */ +#ifdef CONFIG_BOOKE +#define SPRN_RSTCFG 0x39b /* Reset Configuration */ +#endif #define SPRN_SDA 0x3BF /* Sampled Data Address Register */ #define SPRN_SDR1 0x019 /* MMU Hash Base Register */ #define SPRN_SGR 0x3B9 /* Storage Guarded Register */ @@ -315,6 +360,7 @@ #define SPRN_SRR1 0x01B /* Save/Restore Register 1 */ #define SPRN_SRR2 0x3DE /* Save/Restore Register 2 */ #define SPRN_SRR3 0x3DF /* Save/Restore Register 3 */ + #ifdef CONFIG_BOOKE #define SPRN_SVR 0x3FF /* System Version Register */ #else diff --git a/include/configs/PMC405DE.h b/include/configs/PMC405DE.h new file mode 100644 index 0000000..5232745 --- /dev/null +++ b/include/configs/PMC405DE.h @@ -0,0 +1,378 @@ +/* + * (C) Copyright 2009 + * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd.eu + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_405EP 1 /* This is a PPC405 CPU */ +#define CONFIG_4xx 1 /* ...member of PPC4xx family */ +#define CONFIG_PMC405DE 1 /* ...on a PMC405DE board */ + +#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ +#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ +#define CONFIG_BOARD_TYPES 1 /* support board types */ + +#define CONFIG_SYS_CLK_FREQ 33330000 /* external frequency to pll */ + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ + +#undef CONFIG_BOOTARGS +#undef CONFIG_BOOTCOMMAND + +#define CONFIG_PREBOOT /* enable preboot variable */ + +#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change*/ + +#define CONFIG_NET_MULTI 1 +#define CONFIG_HAS_ETH1 + +#define CONFIG_PPC4xx_EMAC +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_PHY_ADDR 1 /* PHY address */ +#define CONFIG_PHY1_ADDR 2 /* 2nd PHY address */ + +#define CONFIG_SYS_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_BSP +#define CONFIG_CMD_CHIP_CONFIG +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING + +#define CONFIG_OF_LIBFDT +#define CONFIG_OF_BOARD_SETUP + +#undef CONFIG_WATCHDOG /* watchdog disabled */ +#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ +#define CONFIG_PRAM 0 + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ + +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */ + +#define CONFIG_SYS_DEVICE_NULLDEV 1 /* include nulldev device */ +#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* don't print console info */ + +#define CONFIG_SYS_MEMTEST_START 0x0100000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x3000000 /* 1 ... 48 MB in DRAM */ + +#undef CONFIG_SYS_EXT_SERIAL_CLOCK +#define CONFIG_SYS_BASE_BAUD 691200 +#define CONFIG_UART1_CONSOLE + +/* The following table includes the supported baudrates */ +#define CONFIG_SYS_BAUDRATE_TABLE \ + { 9600, 19200, 38400, 57600, 115200 } + +#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ +#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ + +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ + +#define CONFIG_AUTOBOOT_KEYED 1 +#define CONFIG_AUTOBOOT_PROMPT \ + "Press SPACE to abort autoboot in %d seconds\n", bootdelay +#undef CONFIG_AUTOBOOT_DELAY_STR +#define CONFIG_AUTOBOOT_STOP_STR " " + +/* + * PCI stuff + */ +#define PCI_HOST_ADAPTER 0 /* configure as pci adapter */ +#define PCI_HOST_FORCE 1 /* configure as pci host */ +#define PCI_HOST_AUTO 2 /* detected via arbiter enable */ + +#define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_HOST PCI_HOST_AUTO /* select pci host function */ +#define CONFIG_PCI_PNP /* do (not) pci plug-and-play */ + +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ + +/* + * PCI identification + */ +#define CONFIG_SYS_PCI_SUBSYS_VENDORID PCI_VENDOR_ID_ESDGMBH +#define CONFIG_SYS_PCI_SUBSYS_ID_NONMONARCH 0x040e /* Dev ID: Non-Monarch */ +#define CONFIG_SYS_PCI_SUBSYS_ID_MONARCH 0x040f /* Dev ID: Monarch */ +#define CONFIG_SYS_PCI_CLASSCODE_NONMONARCH PCI_CLASS_PROCESSOR_POWERPC +#define CONFIG_SYS_PCI_CLASSCODE_MONARCH PCI_CLASS_BRIDGE_HOST + +#define CONFIG_SYS_PCI_CLASSCODE CONFIG_SYS_PCI_CLASSCODE_MONARCH +#define CONFIG_SYS_PCI_SUBSYS_DEVICEID CONFIG_SYS_PCI_SUBSYS_ID_MONARCH + +#define CONFIG_SYS_PCI_PTM1LA 0x00000000 /* point to sdram */ +#define CONFIG_SYS_PCI_PTM1MS 0xfc000001 /* 64MB, enable=1 */ +#define CONFIG_SYS_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ +#define CONFIG_SYS_PCI_PTM2LA 0xef000000 /* point to CPLD, GPIO */ +#define CONFIG_SYS_PCI_PTM2MS 0xff000001 /* 16MB, enable=1 */ +#define CONFIG_SYS_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) +/* + * FLASH organization + */ +#define CONFIG_SYS_FLASH_CFI 1 /* CFI compatible */ +#define CONFIG_FLASH_CFI_DRIVER 1 /* Use common CFI driver */ + +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } + +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max. no. memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max sectors per chip */ + +#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* erase timeout (in ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* write timeout (in ms) */ + +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* buffered writes (faster) */ +#define CONFIG_SYS_FLASH_PROTECTION 1 /* hardware flash protection */ + +#define CONFIG_SYS_FLASH_EMPTY_INFO 1 /* 'E' for empty sector (flinfo) */ +#define CONFIG_SYS_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ + + +/* + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 + */ +#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_FLASH_BASE 0xfe000000 +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE +#define CONFIG_SYS_MONITOR_LEN (~(TEXT_BASE) + 1) +#define CONFIG_SYS_MALLOC_LEN (256 * 1024) + +/* + * Environment in EEPROM setup + */ +#define CONFIG_ENV_IS_IN_EEPROM 1 +#define CONFIG_ENV_OFFSET 0x100 +#define CONFIG_ENV_SIZE 0x700 + +/* + * I2C EEPROM (24W16) for environment + */ +#define CONFIG_HARD_I2C /* I2c with hardware support */ +#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CONFIG_SYS_I2C_SLAVE 0x7F + +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM 24W16 */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ +/* mask of address bits that overflow into the "EEPROM chip address" */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24WC08 has */ + /* 16 byte page write mode using*/ + /* last 4 bits of the address */ +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ +#define CONFIG_SYS_EEPROM_WREN 1 + +#define CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR 0x50 +#define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET 0x40 +#define CONFIG_4xx_CONFIG_BLOCKSIZE 0x20 + +/* + * RTC + */ +#define CONFIG_RTC_RX8025 + +/* + * External Bus Controller (EBC) Setup + * (max. 55MHZ EBC clock) + */ +/* Memory Bank 0 (NOR flash) BAS=0xFE0,BS=32MB,BU=R/W,BW=16bit */ +#define CONFIG_SYS_EBC_PB0AP 0x03017200 +#define CONFIG_SYS_EBC_PB0CR (CONFIG_SYS_FLASH_BASE | 0xba000) + +/* Memory Bank 1 (CPLD) BAS=0xEF0,BS=16MB,BU=R/W,BW=16bit */ +#define CONFIG_SYS_CPLD_BASE 0xef000000 +#define CONFIG_SYS_EBC_PB1AP 0x00800000 +#define CONFIG_SYS_EBC_PB1CR (CONFIG_SYS_CPLD_BASE | 0x18000) + +/* + * Definitions for initial stack pointer and data area (in data cache) + */ +/* use on chip memory ( OCM ) for temperary stack until sdram is tested */ +#define CONFIG_SYS_TEMP_STACK_OCM 1 + +/* On Chip Memory location */ +#define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000 +#define CONFIG_SYS_OCM_DATA_SIZE 0x1000 +/* inside SDRAM */ +#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR +/* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE + +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes res. for initial data */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \ + CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +/* + * GPIO Configuration + */ +#define CONFIG_SYS_4xx_GPIO_TABLE { /* GPIO Alt1 */ \ +{ \ +/* GPIO Core 0 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO0 PerBLast */ \ +{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO1 TS1E */ \ +{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO2 TS2E */ \ +{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO3 TS1O */ \ +{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO4 TS2O */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_1 }, /* GPIO5 TS3 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_1 }, /* GPIO6 TS4 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_1 }, /* GPIO7 TS5 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO8 TS6 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_1 }, /* GPIO9 TrcClk */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO10 PerCS1 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO11 PerCS2 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO12 PerCS3 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO13 PerCS4 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO14 PerAddr03 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO15 PerAddr04 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO16 PerAddr05 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO17 IRQ0 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO18 IRQ1 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO19 IRQ2 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO20 IRQ3 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO21 IRQ4 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO22 IRQ5 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO23 IRQ6 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO24 UART0_DCD */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO25 UART0_DSR */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO26 UART0_RI */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO27 UART0_DTR */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO28 UART1_Rx */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO29 UART1_Tx */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO30 RejectPkt0 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO31 RejectPkt1 */ \ +} \ +} + +#define CONFIG_SYS_GPIO_HWREV_MASK (0xf0000000 >> 1) /* GPIO1..4 */ +#define CONFIG_SYS_GPIO_HWREV_SHIFT 27 +#define CONFIG_SYS_GPIO_LEDRUN_N (0x80000000 >> 5) /* GPIO5 */ +#define CONFIG_SYS_GPIO_LEDA_N (0x80000000 >> 6) /* GPIO6 */ +#define CONFIG_SYS_GPIO_LEDB_N (0x80000000 >> 7) /* GPIO7 */ +#define CONFIG_SYS_GPIO_SELFRST_N (0x80000000 >> 8) /* GPIO8 */ +#define CONFIG_SYS_GPIO_EEPROM_WP (0x80000000 >> 9) /* GPIO9 */ +#define CONFIG_SYS_GPIO_MONARCH_N (0x80000000 >> 11) /* GPIO11 */ +#define CONFIG_SYS_GPIO_EREADY (0x80000000 >> 12) /* GPIO12 */ +#define CONFIG_SYS_GPIO_M66EN (0x80000000 >> 13) /* GPIO13 */ + +/* + * Default speed selection (cpu_plb_opb_ebc) in mhz. + * This value will be set if iic boot eprom is disabled. + */ +#undef CONFIG_SYS_FCPU333MHZ +#define CONFIG_SYS_FCPU266MHZ +#undef CONFIG_SYS_FCPU133MHZ + +#if defined(CONFIG_SYS_FCPU333MHZ) +/* + * CPU: 333MHz + * PLB/SDRAM/MAL: 111MHz + * OPB: 55MHz + * EBC: 55MHz + * PCI: 55MHz (111MHz on M66EN=1) + */ +#define PLLMR0_DEFAULT (PLL_CPUDIV_1 | PLL_PLBDIV_3 | \ + PLL_OPBDIV_2 | PLL_EXTBUSDIV_2 | \ + PLL_MALDIV_1 | PLL_PCIDIV_2) +#define PLLMR1_DEFAULT (PLL_FBKDIV_10 | \ + PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \ + PLL_TUNE_15_M_40 | PLL_TUNE_VCO_HI) +#endif + +#if defined(CONFIG_SYS_FCPU266MHZ) +/* + * CPU: 266MHz + * PLB/SDRAM/MAL: 133MHz + * OPB: 66MHz + * EBC: 44MHz + * PCI: 44MHz (66MHz on M66EN=1) + */ +#define PLLMR0_DEFAULT (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \ + PLL_OPBDIV_2 | PLL_EXTBUSDIV_3 | \ + PLL_MALDIV_1 | PLL_PCIDIV_3) +#define PLLMR1_DEFAULT (PLL_FBKDIV_8 | \ + PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \ + PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW) +#endif + +#if defined(CONFIG_SYS_FCPU133MHZ) +/* + * CPU: 133MHz + * PLB/SDRAM/MAL: 133MHz + * OPB: 66MHz + * EBC: 44MHz + * PCI: 44MHz (66MHz on M66EN=1) + */ +#define PLLMR0_DEFAULT (PLL_CPUDIV_1 | PLL_PLBDIV_1 | \ + PLL_OPBDIV_2 | PLL_EXTBUSDIV_3 | \ + PLL_MALDIV_1 | PLL_PCIDIV_3) +#define PLLMR1_DEFAULT (PLL_FBKDIV_4 | \ + PLL_FWDDIVA_6 | PLL_FWDDIVB_6 | \ + PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW) +#endif + +#endif /* __CONFIG_H */ diff --git a/include/configs/XPEDITE1000.h b/include/configs/XPEDITE1000.h new file mode 100644 index 0000000..658e947 --- /dev/null +++ b/include/configs/XPEDITE1000.h @@ -0,0 +1,356 @@ +/* + * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * config for XPedite1000 from XES Inc. + * Ported from EBONY config by Travis B. Sawyer <tsawyer@sandburst.com> + * (C) Copyright 2003 Sandburst Corporation + * board/config_EBONY.h - configuration for AMCC 440GP Ref (Ebony) + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* High Level Configuration Options */ +#define CONFIG_XPEDITE1000 1 +#define CONFIG_SYS_BOARD_NAME "XPedite1000" +#define CONFIG_4xx 1 /* ... PPC4xx family */ +#define CONFIG_440 1 +#define CONFIG_440GX 1 /* 440 GX */ +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ +#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ + +/* + * DDR config + */ +#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */ +#define SPD_EEPROM_ADDRESS {0x54} /* SPD i2c spd addresses */ +#define CONFIG_VERY_BIG_RAM 1 + +/* + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + */ +#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_FLASH_BASE 0xff000000 /* start of FLASH */ +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */ +#define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped pci memory */ +#define CONFIG_SYS_PERIPHERAL_BASE 0xe0000000 /* internal peripherals */ +#define CONFIG_SYS_ISRAM_BASE 0xc0000000 /* internal SRAM */ +#define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */ +#define CONFIG_SYS_NVRAM_BASE_ADDR (CONFIG_SYS_PERIPHERAL_BASE + 0x08000000) +#define CONFIG_SYS_GPIO_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000700) + +/* + * Diagnostics + */ +#define CONFIG_SYS_ALT_MEMTEST +#define CONFIG_SYS_MEMTEST_START 0x0400000 +#define CONFIG_SYS_MEMTEST_END 0x0C00000 + +/* POST support */ +#define CONFIG_POST (CONFIG_SYS_POST_RTC | \ + CONFIG_SYS_POST_I2C) + +/* + * LED support + */ +#define USR_LED0 0x00000080 +#define USR_LED1 0x00000100 +#define USR_LED2 0x00000200 +#define USR_LED3 0x00000400 + +#ifndef __ASSEMBLY__ +extern unsigned long in32(unsigned int); +extern void out32(unsigned int, unsigned long); + +#define LED0_ON() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) & ~USR_LED0)) +#define LED1_ON() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) & ~USR_LED1)) +#define LED2_ON() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) & ~USR_LED2)) +#define LED3_ON() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) & ~USR_LED3)) + +#define LED0_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED0)) +#define LED1_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED1)) +#define LED2_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED2)) +#define LED3_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED3)) +#endif + +/* + * Use internal SRAM for initial stack + */ +#define CONFIG_SYS_TEMP_STACK_OCM 1 +#define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE +#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */ +#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_POST_WORD_ADDR + +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 KB for Mon */ +#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ + +/* + * Serial Port + */ +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400} +#define CONFIG_BAUDRATE 115200 +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +/* + * Use the HUSH parser + */ +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +/* + * NOR flash configuration + */ +#define CONFIG_SYS_MAX_FLASH_BANKS 3 +#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE, 0xf0000000, 0xf4000000 } +#define CONFIG_SYS_MAX_FLASH_SECT 512 /* sectors per device */ +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE +#define CONFIG_SYS_FLASH_QUIET_TEST /* MirrorBit flashes are optional */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +/* + * I2C + */ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CONFIG_SYS_I2C_SLAVE 0x7f +#define CONFIG_I2C_MULTI_BUS + +/* I2C EEPROM */ +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 + +/* I2C RTC: STMicro M41T00 */ +#define CONFIG_RTC_M41T11 1 +#define CONFIG_SYS_I2C_RTC_ADDR 0x68 +#define CONFIG_SYS_M41T11_BASE_YEAR 2000 + +/* + * PCI + */ +/* General PCI */ +#define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CONFIG_SYS_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */ + +/* Board-specific PCI */ +#define CONFIG_SYS_PCI_TARGET_INIT /* let board init pci target */ +#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014 /* IBM */ +#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */ +#define CONFIG_SYS_PCI_FORCE_PCI_CONV /* Force PCI Conventional Mode */ + +/* + * Networking options + */ +#define CONFIG_PPC4xx_EMAC +#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ +#define CONFIG_NET_MULTI 1 +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ +#define CONFIG_SYS_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */ +#define CONFIG_ETHPRIME "ppc_4xx_eth2" +#define CONFIG_PHY_ADDR 4 /* PHY address phy0 not populated */ +#define CONFIG_PHY2_ADDR 4 /* PHY address phy2 */ +#define CONFIG_HAS_ETH2 1 /* add support for "eth2addr" */ +#define CONFIG_PHY3_ADDR 8 /* PHY address phy3 */ +#define CONFIG_HAS_ETH3 1 /* add support for "eth3addr" */ + +/* BOOTP options */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* + * Command configuration + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_SAVEENV +#define CONFIG_CMD_SNTP + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CONFIG_CMDLINE_EDITING 1 /* Command-line editing */ +#define CONFIG_BOOTDELAY 3 /* -1 disables auto-boot */ +#define CONFIG_PANIC_HANG /* do not reset board on panic */ +#define CONFIG_PREBOOT /* enable preboot variable */ +#define CONFIG_FIT 1 +#define CONFIG_FIT_VERBOSE 1 +#define CONFIG_INTEGRITY /* support booting INTEGRITY OS */ +#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/* + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +/* + * Environment Configuration + */ +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128k (one sector) for env */ +#define CONFIG_ENV_SIZE 0x8000 +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - (256 * 1024)) + +/* + * Flash memory map: + * fff80000 - ffffffff U-Boot (512 KB) + * fff40000 - fff7ffff U-Boot Environment (256 KB) + * fff00000 - fff3ffff FDT (256KB) + * ffc00000 - ffefffff OS image (3MB) + * ff000000 - ffbfffff OS Use/Filesystem (12MB) + */ + +#define CONFIG_UBOOT_ENV_ADDR MK_STR(TEXT_BASE) +#define CONFIG_FDT_ENV_ADDR MK_STR(0xfff00000) +#define CONFIG_OS_ENV_ADDR MK_STR(0xffc00000) + +#define CONFIG_PROG_UBOOT \ + "$download_cmd $loadaddr $ubootfile; " \ + "if test $? -eq 0; then " \ + "protect off "CONFIG_UBOOT_ENV_ADDR" +80000; " \ + "erase "CONFIG_UBOOT_ENV_ADDR" +80000; " \ + "cp.w $loadaddr "CONFIG_UBOOT_ENV_ADDR" 40000; " \ + "protect on "CONFIG_UBOOT_ENV_ADDR" +80000; " \ + "cmp.b $loadaddr "CONFIG_UBOOT_ENV_ADDR" 80000; " \ + "if test $? -ne 0; then " \ + "echo PROGRAM FAILED; " \ + "else; " \ + "echo PROGRAM SUCCEEDED; " \ + "fi; " \ + "else; " \ + "echo DOWNLOAD FAILED; " \ + "fi;" + +#define CONFIG_BOOT_OS_NET \ + "$download_cmd $osaddr $osfile; " \ + "if test $? -eq 0; then " \ + "if test -n $fdtaddr; then " \ + "$download_cmd $fdtaddr $fdtfile; " \ + "if test $? -eq 0; then " \ + "bootm $osaddr - $fdtaddr; " \ + "else; " \ + "echo FDT DOWNLOAD FAILED; " \ + "fi; " \ + "else; " \ + "bootm $osaddr; " \ + "fi; " \ + "else; " \ + "echo OS DOWNLOAD FAILED; " \ + "fi;" + +#define CONFIG_PROG_OS \ + "$download_cmd $osaddr $osfile; " \ + "if test $? -eq 0; then " \ + "erase "CONFIG_OS_ENV_ADDR" +$filesize; " \ + "cp.b $osaddr "CONFIG_OS_ENV_ADDR" $filesize; " \ + "cmp.b $osaddr "CONFIG_OS_ENV_ADDR" $filesize; " \ + "if test $? -ne 0; then " \ + "echo OS PROGRAM FAILED; " \ + "else; " \ + "echo OS PROGRAM SUCCEEDED; " \ + "fi; " \ + "else; " \ + "echo OS DOWNLOAD FAILED; " \ + "fi;" + +#define CONFIG_PROG_FDT \ + "$download_cmd $fdtaddr $fdtfile; " \ + "if test $? -eq 0; then " \ + "erase "CONFIG_FDT_ENV_ADDR" +$filesize;" \ + "cp.b $fdtaddr "CONFIG_FDT_ENV_ADDR" $filesize; " \ + "cmp.b $fdtaddr "CONFIG_FDT_ENV_ADDR" $filesize; " \ + "if test $? -ne 0; then " \ + "echo FDT PROGRAM FAILED; " \ + "else; " \ + "echo FDT PROGRAM SUCCEEDED; " \ + "fi; " \ + "else; " \ + "echo FDT DOWNLOAD FAILED; " \ + "fi;" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "autoload=yes\0" \ + "download_cmd=tftp\0" \ + "console_args=console=ttyS0,115200\0" \ + "root_args=root=/dev/nfs rw\0" \ + "misc_args=ip=on\0" \ + "set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \ + "bootfile=/home/user/file\0" \ + "osfile=/home/user/uImage-XPedite1000\0" \ + "fdtfile=/home/user/xpedite1000.dtb\0" \ + "ubootfile=/home/user/u-boot.bin\0" \ + "fdtaddr=c00000\0" \ + "osaddr=0x1000000\0" \ + "loadaddr=0x1000000\0" \ + "prog_uboot="CONFIG_PROG_UBOOT"\0" \ + "prog_os="CONFIG_PROG_OS"\0" \ + "prog_fdt="CONFIG_PROG_FDT"\0" \ + "bootcmd_net=run set_bootargs; "CONFIG_BOOT_OS_NET"\0" \ + "bootcmd_flash=run set_bootargs; " \ + "bootm "CONFIG_OS_ENV_ADDR" - "CONFIG_FDT_ENV_ADDR"\0" \ + "bootcmd=run bootcmd_flash\0" +#endif /* __CONFIG_H */ diff --git a/include/configs/XPEDITE1K.h b/include/configs/XPEDITE1K.h deleted file mode 100644 index 74e55c9..0000000 --- a/include/configs/XPEDITE1K.h +++ /dev/null @@ -1,274 +0,0 @@ -/* - * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/************************************************************************ - * config for XPedite1000 from XES Inc. - * Ported from EBONY config by Travis B. Sawyer <tsawyer@sandburst.com> - * (C) Copyright 2003 Sandburst Corporation - * board/config_EBONY.h - configuration for AMCC 440GP Ref (Ebony) - ***********************************************************************/ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/*----------------------------------------------------------------------- - * High Level Configuration Options - *----------------------------------------------------------------------*/ -#define CONFIG_XPEDITE1K 1 /* Board is XPedite 1000 */ -#define CONFIG_4xx 1 /* ... PPC4xx family */ -#define CONFIG_440 1 -#define CONFIG_440GX 1 /* 440 GX */ -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ -#define CONFIG_MISC_INIT_R -#undef CONFIG_SYS_DRAM_TEST /* Disable-takes long time! */ -#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ - - -/* POST support */ -#define CONFIG_POST (CONFIG_SYS_POST_RTC | \ - CONFIG_SYS_POST_I2C) - -/*----------------------------------------------------------------------- - * Base addresses -- Note these are effective addresses where the - * actual resources get mapped (not physical addresses) - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* _must_ be 0 */ -#define CONFIG_SYS_FLASH_BASE 0xfff80000 /* start of FLASH */ - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE /* start of monitor */ -#define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped pci memory */ -#define CONFIG_SYS_PERIPHERAL_BASE 0xe0000000 /* internal peripherals */ -#define CONFIG_SYS_ISRAM_BASE 0xc0000000 /* internal SRAM */ -#define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */ - -#define CONFIG_SYS_NVRAM_BASE_ADDR (CONFIG_SYS_PERIPHERAL_BASE + 0x08000000) -#define CONFIG_SYS_GPIO_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000700) - -#define USR_LED0 0x00000080 -#define USR_LED1 0x00000100 -#define USR_LED2 0x00000200 -#define USR_LED3 0x00000400 - -#ifndef __ASSEMBLY__ -extern unsigned long in32(unsigned int); -extern void out32(unsigned int, unsigned long); - -#define LED0_ON() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) & ~USR_LED0)) -#define LED1_ON() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) & ~USR_LED1)) -#define LED2_ON() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) & ~USR_LED2)) -#define LED3_ON() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) & ~USR_LED3)) - -#define LED0_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED0)) -#define LED1_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED1)) -#define LED2_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED2)) -#define LED3_OFF() out32(CONFIG_SYS_GPIO_BASE, (in32(CONFIG_SYS_GPIO_BASE) | USR_LED3)) -#endif - -/*----------------------------------------------------------------------- - * Initial RAM & stack pointer (placed in internal SRAM) - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_TEMP_STACK_OCM 1 -#define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x2000 /* End of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ - - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) -#define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_POST_WORD_ADDR - -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ -#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc*/ - -/*----------------------------------------------------------------------- - * Serial Port - *----------------------------------------------------------------------*/ -#undef CONFIG_SERIAL_SOFTWARE_FIFO -#define CONFIG_BAUDRATE 9600 - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400} - -/*----------------------------------------------------------------------- - * NVRAM/RTC - * - * NOTE: Upper 8 bytes of NVRAM is where the RTC registers are located. - * The DS1743 code assumes this condition (i.e. -- it assumes the base - * address for the RTC registers is: - * - * CONFIG_SYS_NVRAM_BASE_ADDR + CONFIG_SYS_NVRAM_SIZE - * - *----------------------------------------------------------------------*/ -/* TBS: Xpedite 1000 has STMicro M41T00 via IIC */ -#define CONFIG_RTC_M41T11 1 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 -#define CONFIG_SYS_M41T11_BASE_YEAR 2000 - -/*----------------------------------------------------------------------- - * FLASH related - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 8 /* sectors per device */ - -#undef CONFIG_SYS_FLASH_CHECKSUM -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -/*----------------------------------------------------------------------- - * DDR SDRAM - *----------------------------------------------------------------------*/ -#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */ -#define SPD_EEPROM_ADDRESS {0x54} /* SPD i2c spd addresses */ -#define CONFIG_VERY_BIG_RAM 1 -/*----------------------------------------------------------------------- - * I2C - *----------------------------------------------------------------------*/ -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#undef CONFIG_SOFT_I2C /* I2C bit-banged */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7f -#define CONFIG_SYS_I2C_NOPROBES {0x55,0x56,0x57,0x58,0x59,0x5a,0x5b,0x5c,0x69} /* Don't probe these addrs */ - -/*----------------------------------------------------------------------- - * Environment - *----------------------------------------------------------------------*/ -#define CONFIG_ENV_IS_IN_EEPROM 1 -#define CONFIG_ENV_SIZE 0x100 /* Size of Environment vars */ -#define CONFIG_ENV_OFFSET 0x100 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* this is actually the second page of the eeprom */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 - -#define CONFIG_BOOTARGS "root=/dev/hda1 " -#define CONFIG_BOOTCOMMAND "bootm ffc00000" /* autoboot command */ -#define CONFIG_BOOTDELAY 5 /* disable autoboot */ -#define CONFIG_BAUDRATE 9600 - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -#define CONFIG_PPC4xx_EMAC -#define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_PHY_ADDR 0 /* PHY address phy0 not populated */ -#define CONFIG_PHY1_ADDR 1 /* PHY address phy1 not populated */ -#define CONFIG_PHY2_ADDR 4 /* PHY address phy2 */ -#define CONFIG_PHY3_ADDR 8 /* PHY address phy3 */ -#define CONFIG_NET_MULTI 1 -#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ -#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ -#define CONFIG_SYS_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */ - -#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */ -#define CONFIG_HAS_ETH2 1 /* add support for "eth2addr" */ -#define CONFIG_HAS_ETH3 1 /* add support for "eth3addr" */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_PCI -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_I2C -#define CONFIG_CMD_DATE -#define CONFIG_CMD_BEDBUG -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_PING -#define CONFIG_CMD_ELF -#define CONFIG_CMD_MII -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_FAT - - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ - -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - - -/*----------------------------------------------------------------------- - * PCI stuff - *----------------------------------------------------------------------- - */ -/* General PCI */ -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_PNP /* do pci plug-and-play */ -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ -#define CONFIG_SYS_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE */ - -/* Board-specific PCI */ -#define CONFIG_SYS_PCI_TARGET_INIT /* let board init pci target */ - -#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014 /* IBM */ -#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */ -#define CONFIG_SYS_PCI_FORCE_PCI_CONV /* Force PCI Conventional Mode */ -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/* - * Internal Definitions - * - * Boot Flags - */ -#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02 /* Software reboot */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ -#endif -#endif /* __CONFIG_H */ diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h index d22d411..217a8ee 100644 --- a/include/configs/canyonlands.h +++ b/include/configs/canyonlands.h @@ -330,6 +330,11 @@ #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 +/* I2C bootstrap EEPROM */ +#define CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR 0x52 +#define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET 0 +#define CONFIG_4xx_CONFIG_BLOCKSIZE 16 + /* I2C SYSMON (LM75, AD7414 is almost compatible) */ #define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */ #define CONFIG_DTT_AD7414 1 /* use AD7414 */ @@ -442,6 +447,7 @@ /* * Commands additional to the ones defined in amcc-common.h */ +#define CONFIG_CMD_CHIP_CONFIG #if defined(CONFIG_ARCHES) #define CONFIG_CMD_DTT #define CONFIG_CMD_PCI diff --git a/include/configs/dlvision.h b/include/configs/dlvision.h new file mode 100644 index 0000000..4533799 --- /dev/null +++ b/include/configs/dlvision.h @@ -0,0 +1,225 @@ +/* + * (C) Copyright 2009 + * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_405EP 1 /* this is a PPC405 CPU */ +#define CONFIG_4xx 1 /* member of PPC4xx family */ +#define CONFIG_DLVISION 1 /* on a Neo board */ + +/* + * Include common defines/options for all AMCC eval boards + */ +#define CONFIG_HOSTNAME dlvision +#define CONFIG_IDENT_STRING " dlvision 0.01" +#include "amcc-common.h" + +#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f */ +#define CONFIG_MISC_INIT_R /* call misc_init_r */ + +#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */ + +/* + * Configure PLL + */ +#define PLLMR0_DEFAULT PLLMR0_266_133_66_33 +#define PLLMR1_DEFAULT PLLMR1_266_133_66_33 + +/* new uImage format support */ +#define CONFIG_FIT +#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ + +#define CONFIG_ENV_IS_IN_FLASH /* use FLASH for environment vars */ + +/* + * Default environment variables + */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_AMCC_DEF_ENV \ + CONFIG_AMCC_DEF_ENV_POWERPC \ + CONFIG_AMCC_DEF_ENV_NOR_UPD \ + "kernel_addr=fc000000\0" \ + "fdt_addr=fc1e0000\0" \ + "ramdisk_addr=fc200000\0" \ + "" + +#define CONFIG_PHY_ADDR 4 /* PHY address */ +#define CONFIG_HAS_ETH0 +#define CONFIG_HAS_ETH1 +#define CONFIG_PHY1_ADDR 0xc /* EMAC1 PHY address */ +#define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ + +/* + * Commands additional to the ones defined in amcc-common.h + */ +#define CONFIG_CMD_CACHE +#undef CONFIG_CMD_EEPROM + +/* + * SDRAM configuration (please see cpu/ppc/sdram.[ch]) + */ +#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ + +/* SDRAM timings used in datasheet */ +#define CONFIG_SYS_SDRAM_CL 3 /* CAS latency */ +#define CONFIG_SYS_SDRAM_tRP 20 /* PRECHARGE command period */ +#define CONFIG_SYS_SDRAM_tRC 66 /* ACTIVE-to-ACTIVE period */ +#define CONFIG_SYS_SDRAM_tRCD 20 /* ACTIVE-to-READ delay */ +#define CONFIG_SYS_SDRAM_tRFC 66 /* Auto refresh period */ + +/* + * If CONFIG_SYS_EXT_SERIAL_CLOCK, then the UART divisor is 1. + * If CONFIG_SYS_405_UART_ERRATA_59, then UART divisor is 31. + * Otherwise, UART divisor is determined by CPU Clock and CONFIG_SYS_BASE_BAUD. + * The Linux BASE_BAUD define should match this configuration. + * baseBaud = cpuClock/(uartDivisor*16) + * If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock, + * set Linux BASE_BAUD to 403200. + */ +#undef CONFIG_SERIAL_SOFTWARE_FIFO +#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* external serial clock */ +#undef CONFIG_SYS_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */ +#define CONFIG_SYS_BASE_BAUD 691200 + +/* + * I2C stuff + */ +#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address*/ + +/* + * FLASH organization + */ +#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ +#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ + +#define CONFIG_SYS_FLASH_BASE 0xFC000000 +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } + +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sectors per chip*/ + +#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase/ms */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write/ms */ + +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buff'd writes */ +#define CONFIG_SYS_FLASH_PROTECTION 1 /* use hardware flash protect */ + +#define CONFIG_SYS_FLASH_EMPTY_INFO /* 'E' for empty sector on flinfo */ +#define CONFIG_SYS_FLASH_QUIET_TEST 1 /* no warn upon unknown flash */ + +#ifdef CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ +#define CONFIG_ENV_ADDR ((-CONFIG_SYS_MONITOR_LEN)-CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) +#endif + +/* + * PPC405 GPIO Configuration + */ +#define CONFIG_SYS_4xx_GPIO_TABLE { /* GPIO Alternate1 */ \ +{ \ +/* GPIO Core 0 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO0 PerBLast */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO1 TS1E */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO2 TS2E */ \ +{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO3 TS1O */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO4 TS2O */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_1 }, /* GPIO5 TS3 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO6 TS4 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO7 TS5 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO8 TS6 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO9 TrcClk */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO10 PerCS1 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO11 PerCS2 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO12 PerCS3 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO13 PerCS4 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO14 PerAddr03 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO15 PerAddr04 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO16 PerAddr05 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO17 IRQ0 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO18 IRQ1 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO19 IRQ2 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO20 IRQ3 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO21 IRQ4 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO22 IRQ5 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO23 IRQ6 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO24 UART0_DCD */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO25 UART0_DSR */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO26 UART0_RI */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO27 UART0_DTR */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO28 UART1_Rx */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO29 UART1_Tx */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO30 RejectPkt0 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO31 RejectPkt1 */ \ +} \ +} + +/* + * Definitions for initial stack pointer and data area (in data cache) + */ +/* use on chip memory (OCM) for temperary stack until sdram is tested */ +#define CONFIG_SYS_TEMP_STACK_OCM 1 + +/* On Chip Memory location */ +#define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000 +#define CONFIG_SYS_OCM_DATA_SIZE 0x1000 +#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* in SDRAM */ +#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area */ + +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size/bytes res'd for init data*/ +#define CONFIG_SYS_GBL_DATA_OFFSET \ + (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +/* + * External Bus Controller (EBC) Setup + */ + +/* Memory Bank 0 (NOR-FLASH) initialization */ +#define CONFIG_SYS_EBC_PB0AP 0x92015480 +/* BAS=0xFC0,BS=64MB,BU=R/W,BW=16bit */ +#define CONFIG_SYS_EBC_PB0CR 0xFC0DA000 + +/* Memory Bank 1 (NVRAM) initializatio */ +#define CONFIG_SYS_EBC_PB1AP 0x92015480 +/* BAS=0xFF8,BS=4MB,BU=R/W,BW=8bit */ +#define CONFIG_SYS_EBC_PB1CR 0xFB858000 + +/* Memory Bank 2 (UART) initialization */ +#define CONFIG_UART_BASE 0x7f100000 +#define CONFIG_SYS_EBC_PB2AP 0x92015480 +/* BAS=0x7f1,BS=1MB,BU=R/W,BW=8bit */ +#define CONFIG_SYS_EBC_PB2CR 0x7f118000 + +/* Memory Bank 3 (Latches) initialization */ +#define CONFIG_SYS_LATCH_BASE 0x7f200000 +#define CONFIG_SYS_EBC_PB3AP 0x92015480 +/* BAS=0x7f2,BS=1MB,BU=R/W,BW=16bit */ +#define CONFIG_SYS_EBC_PB3CR 0x7f21a000 + +#endif /* __CONFIG_H */ diff --git a/include/configs/kilauea.h b/include/configs/kilauea.h index df1b061..44bcbc0 100644 --- a/include/configs/kilauea.h +++ b/include/configs/kilauea.h @@ -374,9 +374,15 @@ *----------------------------------------------------------------------*/ #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 6 /* 24C02 requires 5ms delay */ #define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 /* I2C boot EEPROM (24C02BN) */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 + +/* I2C bootstrap EEPROM */ +#define CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR 0x52 +#define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET 0 +#define CONFIG_4xx_CONFIG_BLOCKSIZE 16 /* Standard DTT sensor configuration */ #define CONFIG_DTT_DS1775 1 @@ -426,6 +432,7 @@ /* * Commands additional to the ones defined in amcc-common.h */ +#define CONFIG_CMD_CHIP_CONFIG #define CONFIG_CMD_DATE #define CONFIG_CMD_LOG #define CONFIG_CMD_NAND diff --git a/include/ppc405.h b/include/ppc405.h index 917afec..a17dd35 100644 --- a/include/ppc405.h +++ b/include/ppc405.h @@ -32,61 +32,6 @@ #define CONFIG_SYS_DCACHE_SIZE (2 << 10) /* For PLX IOP480 (403) */ #endif -/*--------------------------------------------------------------------- */ -/* Special Purpose Registers */ -/*--------------------------------------------------------------------- */ - #define srr2 0x3de /* save/restore register 2 */ - #define srr3 0x3df /* save/restore register 3 */ - - /* - * 405 does not really have CSRR0/1 but SRR2/3 are used during critical - * exception for the exact same purposes - let's alias them and have a - * common handling in crit_return() and CRIT_EXCEPTION - */ - #define csrr0 srr2 - #define csrr1 srr3 - - #define dbsr 0x3f0 /* debug status register */ - #define dbcr0 0x3f2 /* debug control register 0 */ - #define dbcr1 0x3bd /* debug control register 1 */ - #define iac1 0x3f4 /* instruction address comparator 1 */ - #define iac2 0x3f5 /* instruction address comparator 2 */ - #define iac3 0x3b4 /* instruction address comparator 3 */ - #define iac4 0x3b5 /* instruction address comparator 4 */ - #define dac1 0x3f6 /* data address comparator 1 */ - #define dac2 0x3f7 /* data address comparator 2 */ - #define dccr 0x3fa /* data cache control register */ - #define iccr 0x3fb /* instruction cache control register */ - #define esr 0x3d4 /* execption syndrome register */ - #define dear 0x3d5 /* data exeption address register */ - #define evpr 0x3d6 /* exeption vector prefix register */ - #define tsr 0x3d8 /* timer status register */ - #define tcr 0x3da /* timer control register */ - #define pit 0x3db /* programmable interval timer */ - #define sgr 0x3b9 /* storage guarded reg */ - #define dcwr 0x3ba /* data cache write-thru reg*/ - #define sler 0x3bb /* storage little-endian reg */ - #define cdbcr 0x3d7 /* cache debug cntrl reg */ - #define icdbdr 0x3d3 /* instr cache dbug data reg*/ - #define ccr0 0x3b3 /* core configuration register */ - #define dvc1 0x3b6 /* data value compare register 1 */ - #define dvc2 0x3b7 /* data value compare register 2 */ - #define pid 0x3b1 /* process ID */ - #define su0r 0x3bc /* storage user-defined register 0 */ - #define zpr 0x3b0 /* zone protection regsiter */ - - #define tbl 0x11c /* time base lower - privileged write */ - #define tbu 0x11d /* time base upper - privileged write */ - - #define sprg4r 0x104 /* Special purpose general 4 - read only */ - #define sprg5r 0x105 /* Special purpose general 5 - read only */ - #define sprg6r 0x106 /* Special purpose general 6 - read only */ - #define sprg7r 0x107 /* Special purpose general 7 - read only */ - #define sprg4w 0x114 /* Special purpose general 4 - write only */ - #define sprg5w 0x115 /* Special purpose general 5 - write only */ - #define sprg6w 0x116 /* Special purpose general 6 - write only */ - #define sprg7w 0x117 /* Special purpose general 7 - write only */ - /****************************************************************************** * Special for PPC405GP ******************************************************************************/ diff --git a/include/ppc440.h b/include/ppc440.h index 01f6eaf..6ce53a6 100644 --- a/include/ppc440.h +++ b/include/ppc440.h @@ -48,99 +48,6 @@ #define CONFIG_SYS_DCACHE_SIZE (32 << 10) /* For AMCC 440 CPUs */ -/*--------------------------------------------------------------------- */ -/* Special Purpose Registers */ -/*--------------------------------------------------------------------- */ -#define xer_reg 0x001 -#define lr_reg 0x008 -#define dec 0x016 /* decrementer */ -#define srr0 0x01a /* save/restore register 0 */ -#define srr1 0x01b /* save/restore register 1 */ -#define pid 0x030 /* process id */ -#define decar 0x036 /* decrementer auto-reload */ -#define csrr0 0x03a /* critical save/restore register 0 */ -#define csrr1 0x03b /* critical save/restore register 1 */ -#define dear 0x03d /* data exception address register */ -#define esr 0x03e /* exception syndrome register */ -#define ivpr 0x03f /* interrupt prefix register */ -#define usprg0 0x100 /* user special purpose register general 0 */ -#define usprg1 0x110 /* user special purpose register general 1 */ -#define tblr 0x10c /* time base lower, read only */ -#define tbur 0x10d /* time base upper, read only */ -#define sprg1 0x111 /* special purpose register general 1 */ -#define sprg2 0x112 /* special purpose register general 2 */ -#define sprg3 0x113 /* special purpose register general 3 */ -#define sprg4 0x114 /* special purpose register general 4 */ -#define sprg5 0x115 /* special purpose register general 5 */ -#define sprg6 0x116 /* special purpose register general 6 */ -#define sprg7 0x117 /* special purpose register general 7 */ -#define tbl 0x11c /* time base lower (supervisor)*/ -#define tbu 0x11d /* time base upper (supervisor)*/ -#define pir 0x11e /* processor id register */ -#define dbsr 0x130 /* debug status register */ -#define dbcr0 0x134 /* debug control register 0 */ -#define dbcr1 0x135 /* debug control register 1 */ -#define dbcr2 0x136 /* debug control register 2 */ -#define iac1 0x138 /* instruction address compare 1 */ -#define iac2 0x139 /* instruction address compare 2 */ -#define iac3 0x13a /* instruction address compare 3 */ -#define iac4 0x13b /* instruction address compare 4 */ -#define dac1 0x13c /* data address compare 1 */ -#define dac2 0x13d /* data address compare 2 */ -#define dvc1 0x13e /* data value compare 1 */ -#define dvc2 0x13f /* data value compare 2 */ -#define tsr 0x150 /* timer status register */ -#define tcr 0x154 /* timer control register */ -#define ivor0 0x190 /* interrupt vector offset register 0 */ -#define ivor1 0x191 /* interrupt vector offset register 1 */ -#define ivor2 0x192 /* interrupt vector offset register 2 */ -#define ivor3 0x193 /* interrupt vector offset register 3 */ -#define ivor4 0x194 /* interrupt vector offset register 4 */ -#define ivor5 0x195 /* interrupt vector offset register 5 */ -#define ivor6 0x196 /* interrupt vector offset register 6 */ -#define ivor7 0x197 /* interrupt vector offset register 7 */ -#define ivor8 0x198 /* interrupt vector offset register 8 */ -#define ivor9 0x199 /* interrupt vector offset register 9 */ -#define ivor10 0x19a /* interrupt vector offset register 10 */ -#define ivor11 0x19b /* interrupt vector offset register 11 */ -#define ivor12 0x19c /* interrupt vector offset register 12 */ -#define ivor13 0x19d /* interrupt vector offset register 13 */ -#define ivor14 0x19e /* interrupt vector offset register 14 */ -#define ivor15 0x19f /* interrupt vector offset register 15 */ -#if defined(CONFIG_440) -#define mcsrr0 0x23a /* machine check save/restore register 0 */ -#define mcsrr1 0x23b /* mahcine check save/restore register 1 */ -#define mcsr 0x23c /* machine check status register */ -#endif -#define inv0 0x370 /* instruction cache normal victim 0 */ -#define inv1 0x371 /* instruction cache normal victim 1 */ -#define inv2 0x372 /* instruction cache normal victim 2 */ -#define inv3 0x373 /* instruction cache normal victim 3 */ -#define itv0 0x374 /* instruction cache transient victim 0 */ -#define itv1 0x375 /* instruction cache transient victim 1 */ -#define itv2 0x376 /* instruction cache transient victim 2 */ -#define itv3 0x377 /* instruction cache transient victim 3 */ -#define dnv0 0x390 /* data cache normal victim 0 */ -#define dnv1 0x391 /* data cache normal victim 1 */ -#define dnv2 0x392 /* data cache normal victim 2 */ -#define dnv3 0x393 /* data cache normal victim 3 */ -#define dtv0 0x394 /* data cache transient victim 0 */ -#define dtv1 0x395 /* data cache transient victim 1 */ -#define dtv2 0x396 /* data cache transient victim 2 */ -#define dtv3 0x397 /* data cache transient victim 3 */ -#define dvlim 0x398 /* data cache victim limit */ -#define ivlim 0x399 /* instruction cache victim limit */ -#define rstcfg 0x39b /* reset configuration */ -#define dcdbtrl 0x39c /* data cache debug tag register low */ -#define dcdbtrh 0x39d /* data cache debug tag register high */ -#define icdbtrl 0x39e /* instruction cache debug tag register low */ -#define icdbtrh 0x39f /* instruction cache debug tag register high */ -#define mmucr 0x3b2 /* mmu control register */ -#define ccr0 0x3b3 /* core configuration register 0 */ -#define ccr1 0x378 /* core configuration for 440x5 only */ -#define icdbdr 0x3d3 /* instruction cache debug data register */ -#define dbdr 0x3f3 /* debug data register */ - /****************************************************************************** * DCRs & Related ******************************************************************************/ diff --git a/post/cpu/ppc4xx/fpu.c b/post/cpu/ppc4xx/fpu.c index fff4169..e9b96dd 100644 --- a/post/cpu/ppc4xx/fpu.c +++ b/post/cpu/ppc4xx/fpu.c @@ -34,7 +34,7 @@ int fpu_status(void) { - if (mfspr(ccr0) & CCR0_DAPUIB) + if (mfspr(SPRN_CCR0) & CCR0_DAPUIB) return 0; /* Disabled */ else return 1; /* Enabled */ @@ -43,14 +43,14 @@ int fpu_status(void) void fpu_disable(void) { - mtspr(ccr0, mfspr(ccr0) | CCR0_DAPUIB); + mtspr(SPRN_CCR0, mfspr(SPRN_CCR0) | CCR0_DAPUIB); mtmsr(mfmsr() & ~MSR_FP); } void fpu_enable(void) { - mtspr(ccr0, mfspr(ccr0) & ~CCR0_DAPUIB); + mtspr(SPRN_CCR0, mfspr(SPRN_CCR0) & ~CCR0_DAPUIB); mtmsr(mfmsr() | MSR_FP); } |