summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--CHANGELOG5976
-rw-r--r--MAINTAINERS1
-rwxr-xr-xMAKEALL30
-rw-r--r--Makefile3
-rw-r--r--board/amcc/yellowstone/yellowstone.c6
-rw-r--r--board/amcc/yosemite/yosemite.c6
-rw-r--r--board/prodrive/alpr/Makefile51
-rw-r--r--board/prodrive/alpr/alpr.c284
-rw-r--r--board/prodrive/alpr/config.mk44
-rw-r--r--board/prodrive/alpr/flash.c70
-rw-r--r--board/prodrive/alpr/fpga.c264
-rw-r--r--board/prodrive/alpr/init.S104
-rw-r--r--board/prodrive/alpr/nand.c173
-rw-r--r--board/prodrive/alpr/u-boot.lds157
-rw-r--r--board/prodrive/common/flash.c4
-rw-r--r--common/Makefile2
-rw-r--r--common/altera.c27
-rw-r--r--common/cmd_fpga.c21
-rw-r--r--common/cyclon2.c305
-rw-r--r--common/fpga.c8
-rw-r--r--cpu/ppc4xx/405gp_pci.c4
-rw-r--r--cpu/ppc4xx/cpu.c20
-rw-r--r--cpu/ppc4xx/sdram.c8
-rw-r--r--drivers/nand/nand_base.c2
-rw-r--r--include/ACEX1K.h19
-rw-r--r--include/altera.h4
-rw-r--r--include/configs/alpr.h352
-rw-r--r--include/configs/yellowstone.h1
-rw-r--r--include/configs/yosemite.h1
-rw-r--r--include/ppc440.h2
30 files changed, 7057 insertions, 892 deletions
diff --git a/CHANGELOG b/CHANGELOG
index e2be1cb..0c321c6 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -1,3 +1,8 @@
+<<<<<<< master
+======================================================================
+Changes since U-Boot 1.1.4:
+======================================================================
+=======
commit 260421a21e934a68d31fb6125b0fbd2631a8ca20
Author: Stefan Roese <sr@denx.de>
Date: Mon Nov 13 13:55:24 2006 +0100
@@ -88,1276 +93,5537 @@ Date: Wed Nov 1 01:34:29 2006 +0100
commit 1954be6e9c9421b45d0a9d05b10356acc7563150
Author: Wolfgang Denk <wd@pollux.denx.de>
Date: Sun Oct 29 01:03:51 2006 +0200
+>>>>>>> origin
- Automatically adjust ARFLAGS so "make -s" is really silent.
+* CFG_NAND_QUIET_TEST added to not warn upon missing NAND device
+ Patch by Stefan Roese, 07 Oct 2006
-commit fae684e89844856383bdf101440889557df3e6b1
-Author: Stefan Roese <sr@denx.de>
-Date: Sat Oct 28 16:45:00 2006 +0200
+* Update ALPR code (NAND support working now)
+ Patch by Stefan Roese, 07 Oct 2006
- [PATCH] omap925.c: Remove unused functions
+* Remove compile warnings in fpga code
+ Patch by Stefan Roese, 07 Oct 2006
- Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
- Signed-off-by: Stefan Roese <sr@denx.de>
+* Add CONFIG_BOARD_RESET to configure board specific reset function
+ Patch by Stefan Roese, 07 Oct 2006
-commit 1265581502ab8ea8c08e8edbe9bf64fbd62fd776
-Author: Stefan Roese <sr@denx.de>
-Date: Sat Oct 28 17:12:58 2006 +0200
+* Remove compile warnings in fpga code
+ Patch by Stefan Roese, 18 Sep 2006
- [PATCH] Add some missing machtypes for netstar & voiceblue boards
+* Add initial support for the ALPR board from Prodrive
+ NAND needs some additional testing
+ Patch by Heiko Schocher, 15 Aug 2006
- Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of
- numbers in code.
+* Add FPGA Altera Cyclone 2 support
+ Patch by Heiko Schocher, 15 Aug 2006
- Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
- Signed-off-by: Stefan Roese <sr@denx.de>
+* Disable autoboot abort for FO300 when silent mode is enabled
+ (according to S1 switch setting).
-commit 856f054410cef52d868feb330168b2a4c4091328
-Author: Stefan Roese <sr@denx.de>
-Date: Sat Oct 28 15:55:52 2006 +0200
+* Cleanup examples binaries
- [PATCH] NAND: Partition name support added to NAND subsystem
+* Add support for AMCC Rainier PPX440GRx eval board
+ Patch by Stefan Roese, 13 Sep 2006
- chpart, nboot and NAND subsystem related commands now accept also partition
- name to specify offset.
+* Add NAND environment support for PPC440EPx Sequoia NAND boot config
+ Patch by Stefan Roese, 12 Sep 2006
- Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
- Signed-off-by: Stefan Roese <sr@denx.de>
+* Update NAND boot documentation
+ Patch by Stefan Roese, 12 Sep 2006
-commit 07a69a18c2ecfda904231fdf23e2523ea7792eb6
-Author: Wolfgang Denk <wd@pollux.denx.de>
-Date: Sat Oct 28 02:29:44 2006 +0200
+* Fix alignment problem in "mtdparts" command
- Update CHANGELOG.
+* Add documentation on the latest build environment extensions to
+ the README file.
-commit 2751a95abd1b96911081c357e96a12fa97b40dee
-Author: Wolfgang Denk <wd@pollux.denx.de>
-Date: Sat Oct 28 02:29:14 2006 +0200
+* Remove dead code (i2o and dma) from cpu/mpc824x/drivers/ directory.
- Enable commandline editing and hush shell on all TQM boards.
+* Fix LOG_DIR directory creation error.
+ Add support for automatic creation of BUILD_DIR directory.
-commit 8078f1a5f63a739b8533478f6c2b62fb1e2f79d7
-Author: Wolfgang Denk <wd@pollux.denx.de>
-Date: Sat Oct 28 02:28:02 2006 +0200
+* Fix build problem cpu/ppc4xx/ndfc.c
+ Patch by Stefan Roese, 07 Sep 2006
- README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE
+* Fix build problem with CPCI440
+ Patch by Stefan Roese, 07 Sep 2006
-commit 471a7be7a042e95e440f5de969c9765214ae8d6e
-Author: Wolfgang Denk <wd@denx.de>
-Date: Sat Oct 28 01:14:32 2006 +0200
+* Change Yellowstone to use CFI write buffer
+ Patch by Stefan Roese, 07 Sep 2006
- Check for illegal character '=' in environment variable names.
+* Add support for AMCC Sequoia PPC440EPx eval board
+ - Add support for PPC440EPx & PPC440GRx
+ - Add support for PPC440EP(x)/GR(x) NAND controller
+ in cpu/ppc4xx directory
+ - Add NAND boot functionality for Sequoia board,
+ please see doc/README.nand-boot-ppc440 for details
+ - This Sequoia NAND image doesn't support environment
+ in NAND for now. This will be added in a short while.
+ Patch by Stefan Roese, 07 Sep 2006
- Make sure the string passed as variable name does not contain a '='
- character. This not only prevents the common error or typing
- "setenv foo=bar" instead of "setenv foo bar", but (more importantly)
- also closes a backdoor which allowed to delete write-protected
- environment variables, for example by using "setenv ethaddr=".
+* Fix mkimage -l bug with multifile images on 64bit platforms
+ Patch by David Updegraff, 06 Sep 2006
-commit 19973b6ad9863a56f5c5fbcfd90e20ab2490a2c2
-Author: Wolfgang Denk <wd@pollux.denx.de>
-Date: Sat Oct 28 00:38:39 2006 +0200
+* Fix build problems on sorcery board.
- Minor code cleanup.
+* Fix coldfire build problems.
+ Patch by Marian Balakowicz, 01 Sep 2006
-commit e11887a77d81077416a2d1c5e0354916fee8c034
-Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
-Date: Thu Oct 26 17:55:31 2006 +0200
+* Add support for a saving build objects in a separate directory.
+ Modifications are based on the Linux kernel approach and support
+ two use cases:
+ 1) Add O= to the make command line 'make O=/tmp/build all'
+ 2) Set environement variable BUILD_DIR to point to the desired location
+ 'export BUILD_DIR=/tmp/build'
+ 'make'
+ The second approach can also be used with a MAKEALL script
+ 'export BUILD_DIR=/tmp/build'
+ './MAKEALL'
+ Command line 'O=' setting overrides the BUILD_DIR environent variable.
+ When none of the above methods is used the local build is performed
+ and the object files are placed in the source directory.
- Don't pass any debug options directly to the assembler
+* Remove the board/netstar/crcit binary from git repository.
- When passing the -g option to gcc, gcc automatically selects a
- suitable --g<format> option to pass on to the assembler.
- Thus, there's no point in forcing a specific debug option on the
- assembler using the -Wa mechanism.
+* Fix tools/updater build error.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+* Fix tools/easylogo build error.
-commit ea08ff6e14f9ebb8c07cfa79c51ef540eb087393
-Author: Jon Loeliger <jdl@freescale.com>
-Date: Fri Oct 27 07:47:22 2006 -0500
+* Fixed problems on PRS200 board caused by adding splash screen on MCC200
- MPC86xx: Cleaned up unused and conditionally used local variables.
+* Extended README entry on coding style
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
+* Added another example showing simple interrupt interception.
-commit d38936cdae46bfd2623ff83f6ce9b616d36ab0f9
-Author: Wolfgang Denk <wd@pollux.denx.de>
-Date: Fri Oct 27 11:55:21 2006 +0200
+* Added simple_strtoul(), getenv() and setenv() to the exported functions.
+ Also bumped up ABI version to reflect this change.
- Fix "ar" flags in some Makefiles to allow for silent "make -s"
+* Added interrupt handling capabilities for mpc5xxx processors.
+ Also added Linux like BUG() macros.
-commit 4653f91c13ed51c21cc4c3855745d69a3fb1817f
-Author: Ben Warren <bwarren@qstreams.com>
-Date: Thu Oct 26 14:38:25 2006 -0400
+* Coding Style cleanup.
+ Patch by Stefano Babic, 31 Aug 2006
- Fix TSEC driver (now for real): avoid crashes if PHY is not attached
- to a TSEC (e.g. a switch is connected via RMII) or
- if the PHY is defective/incorrectly configured.
+* Add splashscreen support for MCC200 board.
- Signed-off-by: Ben Warren <bwarren@qstreams.com>
+* Make the serial driver framework work with CONFIG_SERIAL_MULTI
+ enabled
-commit b985b5d6e4fb88f508f7aa0f126c2e27ada2b999
-Author: Ben Warren <bwarren@qstreams.com>
-Date: Thu Oct 26 14:38:25 2006 -0400
+* PCIe endpoint support for AMCC Yucca 440SPe board
+ Patch by Tirumala R Marri, 26 Aug 2006
- Fix TSEC driver: avoid crashes if PHY is not attached
- to a TSEC (e.g. a switch is connected via RMII) or
- if the PHY is defective/incorrectly configured.
+* Improve DIMM detection for AMCC Yucca 440SPe board
+ Improved the memory DIMM detection for the Yucca 440SPe board for
+ the case where a memory DIMM is falsely detected as present.
+ This issue is seen on some AMCC Yucca 440SPe validation boards if
+ only one 512MB memory DIMM is installed, i.e. DIMM slot 0 is
+ populated and DIMM slot 1 is empty. In this case, U-Boot does
+ not correctly detect that there is only one DIMM memory module
+ installed and will falsely detect two DIMM memory modules are
+ present and therefore U-Boot will not calculate the correct amount
+ of total memory and u-boot will not booting up.
+ Patch by Adam Graham, 24 Aug 2006
- Signed-off-by: Ben Warren <bwarren@qstreams.com>
+* Fix typo.
-commit 2b2a40bebbf1822506e80e631d7253e60f0e0fe6
-Author: Wolfgang Denk <wd@pollux.denx.de>
-Date: Thu Oct 26 16:24:31 2006 +0200
+* Code cleanup
- Code cleanup.
+* Update for MCC200 / PRS200 boards:
+ - auto-adjust console device for Linux.
+ - fix typos.
-commit 5e3b0bc19f07ed277d85324ad0427642c8981baf
-Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
-Date: Wed Oct 25 15:48:59 2006 +0200
+* Add a fix for a buggy USB device on the FO300 board.
- Finish up support for the ATSTK1000/ATSTK1002 boards
+* Updates for MCC200 / PRS200 boards:
+ - support for configurations with SDRAM or DDR memory,
+ - support for highboot and lowboot
+ - adjusting environment definitions
- Add atstk1002_config target to Makefile and move the AVR32 section
- down below Blackfin so that it doesn't end up in the middle of
- MIPS.
+* Add support for WTK FO300 board (TQM5200 based).
- Drop the autogenerated linker script thing for now. Will have to
- revisit how to handle chips with different flash and RAM layout
- later.
+* Fix TQM834x hang.
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+* Update for SC520 board.
+ Patch by David Updegraff, 02 Dec 2005
-commit c76f951a747cfb87ba826ef45b5aea82d5b5dbb4
-Author: Kumar Gala <galak@kernel.crashing.org>
-Date: Tue Oct 24 23:47:37 2006 -0500
+* Fixed common.h spelling error.
+ Patch by Cory Tusar, 30 Nov 2005
- Added support for Multi-Image files that contain a device tree
+* Fix typo.
+ Patch by Andreas Engel, 28 Nov 2005
- If a Multi-Image file contains a third image we try to use it as a
- device tree. The device tree image is assumed to be uncompressed in the
- image file. We automatically allocate space for the device tree in memory
- and provide an 8k pad to allow more than a reasonable amount of growth.
+* Fix fatload command on FAT32 formatted partitions.
+ Patch by Joachim Jaeger, 18 Nov 2005
- Additionally, a device tree that was contained in flash will now automatically
- get copied to system memory as part of boot. Previously an error was
- reported if one tried to boot a device tree that was in flash.
+* Fix drivers/dm9000.c when configured in 32 bit mode.
+ Patch by Eric Benard, 17 Nov 2005
- Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+* Cleanup debug code for yucca board.
-commit 7c52c4b943ff52bbe8796a7e2d3e476ceaf3f512
-Author: Wolfgang Denk <wd@denx.de>
-Date: Tue Oct 24 21:35:55 2006 +0200
+* MCC200: restrict addressable flash space to 32 MB
- Switch to automatically generated CHANGELOG file.
- (use "make CHANGELOG" to update it from time to time)
+* Add debug console on COM12 for MCC200 board
-commit 7ade0c634a979c32fa91a74e8f5775f24651fbe6
-Author: Stefan Roese <sr@denx.de>
-Date: Tue Oct 24 18:06:48 2006 +0200
+* Fix control-c handing in CONFIG_CMDLINE_EDITING
+ Properly pass break code back from readline.
+ Patch by Roger Blofeld, 31 Jul 2006
- Fix bug in PPC440 NAND driver cpu/ppc4xx/ndfc.c
- Patch by Stefan Roese, 24 Oct 2006
+* Add commandline history support to all AMCC eval boards
+ Patch by Stefan Roese, 07 Aug 2006
-commit 8ae3b713b2286e0c3213b7802062e4c1599010de
-Author: Wolfgang Denk <wd@pollux.denx.de>
-Date: Tue Oct 24 17:24:55 2006 +0200
+* Add Macronix MXLV320T flash support for AMCC Bamboo
+ Patch by Stefan Roese, 07 Aug 2006
- Merge with /home/wd/git/u-boot/master
+* Change "mii info" to not print an error upon missing PHY at address
+ Patch by Stefan Roese, 07 Aug 2006
-commit 47a6989c10685d2ab3efcf95228ce50d2a496d3e
-Author: Wolfgang Denk <wd@pollux.denx.de>
-Date: Tue Oct 24 15:32:57 2006 +0200
+* Fix PCI-Express on PPC440SPe rev. A.
- Code cleanup
+* Fix preboot message on TQM85xx after switching to hush parser.
-commit 3a78e3e75b633ecb6413114ffd11e2f000c4f11e
-Author: Wolfgang Denk <wd@pollux.denx.de>
-Date: Tue Oct 24 14:51:36 2006 +0200
+* Adapt TQM85xx ramdisk address to Linux kernel memory map
- Move atstk1000 files into vendor specific directory.
- Patch by Haavard Skinnemoen, 12 Sep 2006
+* Add initial support for PCI-Express on PPC440SPe (Yucca board).
-commit 6ccec4492e77428fd6eafd3dfe94fbdf08e91d37
-Author: Wolfgang Denk <wd@pollux.denx.de>
-Date: Tue Oct 24 14:42:37 2006 +0200
+* Fix compiler warning for TRAB board.
+ Patch by Martin Krause, 07 Aug 2006
- Add ATSTK1000 and ATSTK1002 board support
- Patch by Haavard Skinnemoen, 06 Sep 2006
+* Prevent USB commands from working when USB is stopped.
- This patch adds support for the ATSTK1000 with the ATSTK1002 CPU
- daughterboard.
+* Add rudimentary handling of alternate settings of USB interfaces.
+ This is in order to fix issues with some USB sticks timing out
+ during initialization. Some code readability improvements.
- ATSTK1000 is a full-featured development board for AT32AP CPUs. It
- has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker,
- and connectors for USART, PS/2, VGA, USB, MMC/SD cards and
- CompactFlash cards. For more information, please see this page:
+* PPC440 DDR setup: Set SDRAM0_CFG0[PMU]=0 for best performance
+ AMCC suggested to set the PMU bit to 0 for best performace on
+ the PPC440 DDR controller.
+ Please see doc/README.440-DDR-performance for details.
+ Patch by Stefan Roese, 28 Jul 2006
- http://www.atmel.com/dyn/products/tools.asp?family_id=682
+* AMCC bamboo (440EP) U-Boot image reduced to 384kbyte
+ Please see doc/README.bamboo for details.
+ Patch by Stefan Roese, 27 Jul 2006
- The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the
- AT32AP7000 chip.
+* Fix CONFIG_CMDLINE_EDITING implementation
+ Patch by Stefan Roese, 27 Jul 2006
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+* Fix preboot message on TQM5200 after switching to hush parser.
-commit f93ae788c3640fcde5db383471d45548ff4060d0
-Author: Wolfgang Denk <wd@pollux.denx.de>
-Date: Tue Oct 24 14:31:24 2006 +0200
+* MCC200: set default configuration to low_boot DDR,
+ and support for configurable options high_boot and/or SDRAM.
- Add common serial driver for Atmel AT32 and AT91 chips
- Patch by Haavard Skinnemoen, 06 Sep 2006
+* Add support for 256 MB SDRAM on CPU87
+ Patch by Josef Wagner, 25 Nov 2005
- This is a first attempt at creating a common serial driver for Atmel
- chips. For now, it supports the AT32AP7000 AVR32 chip, but it should
- be possible to support AT91RM9200 and other ARM-based chips with some
- minor modifications.
+* Add configuration for cam5200 board (based on TQM5200S).
- There's nothing fundamentally AVR32-specific in this driver, but it
- does use some features which are currently only defined for the
- AT32AP CPU port:
- * pm_get_clock_freq: Obtain the clock frequency of a given domain
- * gd->console_uart: A "struct device" containing information about
- register mappings, gpio resources and clocks associated with the
- UART device.
+* More code cleanup
- For more information about these features, please see the "AT32AP
- CPU" patch.
+* Disabled kvme080 board in MAKEALL because of build problems.
-commit 72a087e04705c26cad982879ebd06b5281bf825a
-Author: Wolfgang Denk <wd@pollux.denx.de>
-Date: Tue Oct 24 14:27:35 2006 +0200
+* Code cleanup
- Add AT32AP CPU and AT32AP7000 SoC support
- Patch by Haavard Skinnemoen, 06 Sep 2006
+* Update NetStar board
+ Patch by Ladislav Michl, 03 Nov 2005
- This patch adds support for the AT32AP CPU family and the AT32AP7000
- chip, which is the first chip implementing the AVR32 architecture.
+* Make code better readable.
+ Patch by Ladislav Michl, 14 Sep 2005
- The AT32AP CPU core is a high-performance implementation featuring a
- 7-stage pipeline, separate instruction- and data caches, and a MMU.
- For more information, please see the "AVR32 AP Technical Reference":
+* Enable initrd ATAG for xm250 board.
+ Patch by Josef Wagner, 05 Sep 2005
- http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
+* Add readline cmdline-editing extension
+ Patch by JinHua Luo, 01 Sep 2005
- In addition to this, the AT32AP7000 chip comes with a large set of
- integrated peripherals, many of which are shared with the AT91 series
- of ARM-based microcontrollers from Atmel. Full data sheet is
- available here:
+* Add support for friendly-arm SBC-2410X board
+ Patch by JinHua Luo, 01 Sep 2005
- http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
+* Fix multi-part image support on i386 platform.
+ Patch by David Updegraff, 19 Aug 2005
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+* Add support for KVME080 board
+ Patch by Sangmoon Kim, 18 Aug 2005
-commit 7b64fef33c66be648826c0ff9758298ef13d0604
-Author: Wolfgang Denk <wd@pollux.denx.de>
-Date: Tue Oct 24 14:21:16 2006 +0200
+* Fix MIPS LE build problem
+ Patch by Matej Kupljen, 10 Aug 2005
- Add AVR32 architecture support
- Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200
+* Check argument count in "mii" command.
+ Problem pointed out by Andrew Dyer, 13 Jun 2005
- This patch adds common infrastructure code for the Atmel AVR32
- architecture. See doc/README.AVR32 for details.
+* Cleanup TQM5200 board configurations:
+ - make highboot configurations use environment at high end, too,
+ to avoid flash fragmentation
+ - always use redundand environment
+ - don't enable video code for modules without graphics controller
+ - provide useful (though different) mtdparts settings
+ - get rid of CONFIG_CS_AUTOCONF which was always set anyway
- Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+* Extend mkconfig tool to print more useful target name
-commit 2da2d9a4766063b9848f3a35ad6025499cf87265
-Author: Wolfgang Denk <wd@pollux.denx.de>
-Date: Tue Oct 24 13:57:33 2006 +0200
+* Add support for high-boot on TQM5200 and TQM5200S boards.
+ Hint: the CPLD on the TQM5200 must be programmed with a software
+ version supporting the high boot option! The new TQM5200S is
+ already supporting this option. On the TQM5200 this option will be
+ supported in configurations with MPC5200 rev B processors.
+ To actually "high boot", set jumper X30 on the STK52xx.
+ Patch by Martin Krause, 12 Jul 2006
- Use -g instead of -gstabs in AFLAGS_DEBUG
- Patch by Haavard Skinnemoen, 30 Aug 2006
+* Add support for new TQM5200 revisions
+ - Support for TQM5200S (short version without graphic controller)
+ - Support for modules with 'N' type S29GL128N Spansion flashes
+ (requires changes to flash layout)
+ - Support for MPC5200B cpu (mostly support for second SDRAM bank)
+ Patch by Martin Krause, 07 Jul 2006
- In config.mk, -Wa,-gstabs is unconditionally appended to AFLAGS no
- matter what the target's preferred debugging format is. This patch
- simply replaces -gstabs with -g, so that the default debugging format
- for the architecture is used.
+* Fix support for PS/2 keyboard on TQM85xx boards
+ The PS/2 keyobard driver for the TQM85xx modules only supports the
+ internal DUART of the MPC85xx CPU. Since the MPC8560 doesn't
+ include a DUART, the TQM8560 modules can't be used with the PS/2
+ keyboard controller on the STK85xx board.
+ The PS/2 keyboard driver should work with the modules TQM8540,
+ TQM8541 and TQM8555, but it only has been tested on a TQM8540, yet.
+ Make sure the PS/2 controller on the STK85xx is programmed. Jumper
+ settings: X66 1-2, 9-10; X61 2-3
+ Patch by Martin Krause, 21 Jun 2006
-commit 965829872169c2996023840d98e1d85ad148d629
-Author: Wolfgang Denk <wd@pollux.denx.de>
-Date: Tue Oct 24 13:55:18 2006 +0200
+* Adjust RTC century handling on STK52xx board to match Linux driver.
+ Patch by Martin Krause, 12 Jun 2006
- Fix/workaround broken dependency handling with make 3.81
- Based on patch by Haavard Skinnemoen, 29 Aug 2006 11:20:39 +0200
+* Adjust filenames for USB update images on TRAB board.
+ During an automatic update via USB stick, U-Boot searches for
+ images with the name "firmware.img" and "kernel.img". This names
+ are now changed to "firmw_01.img" and "kernl_01.img". This is done,
+ to prevent updates of new boards (with the new macronics "c" step
+ flashes) with old, incompatible firmware or kernel versions.
+ Patch by Martin Krause, 21 Jun 2006
-commit 8318fbf8cc30418b621ea9f39b84b4c1a08f003a
-Author: Marian Balakowicz <m8@semihalf.com>
-Date: Mon Oct 23 22:17:05 2006 +0200
+* Bugfix in VFD routine on TRAB board.
+ Make sure upper lext pixel can be set to blue, too
+ (so far only red was possible).
+ Patch by Martin Krause, 15 Feb 2006
- Fix sequoia separate object direcory building problems.
+* Enable buffered flash writes for TB5200 board.
-commit 3dfa9cfdcee78b30da3432318b32821ffabe974b
-Author: Jon Loeliger <jdl@freescale.com>
-Date: Fri Oct 20 17:16:35 2006 -0500
+* Fix some bugs in TRAB board flash driver.
+ - increase CFG_FLASH_ERASE_TOUT from 2 to 15 seconds
+ - use CFG_FLASH_WRITE_TOUT for programming instead of CFG_FLASH_ERASE_TOUT
+ - remove "Unlock Bypass" mode, because macronix flashes do not support
+ this mode officially
+ - fix flash reset command from 0x00FF to 0x00F0. 0x00FF is only specified
+ for Intel compatible flashes, not for AMD compatible.
+ Patch by Martin Krause, 15 Feb 2006
- Use generic I2C register block on 85xx and 86xx.
+* Add additional error messages to flash driver on TRAB board
+ (for erase errors and timeout errors)
+ Patch by Martin Krause, 14 Feb 2006
- Replace private IMMAP I2C structures with generic reg block
- and allow 86xx to have multiple I2C device busses.
+* Add support for TB5200 board
+ The TB5200 ("Tinybox") is a small baseboard for the TQM5200 module
+ integrated in a little aluminium case.
+ Patch by Martin Krause, 8 Jun 2006
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
+* Enable buffered flash writes for TQM5200 board.
-commit f5012827df11ca0c9be1df5f8b153e188dc2fa7c
-Author: Jon Loeliger <jdl@freescale.com>
-Date: Fri Oct 20 15:54:34 2006 -0500
+* Fix problems with SanDisk Corporation Cruzer Micro USB memory stick.
- Fix compilation warnings on a few 85xx boards.
+* Add support for TQM885D board.
+ Patch by Martin Krause, 20 Mar 2006
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
+* Fix FEC initialisation: All MII configuration is done via FEC1
+ registers, but MII_SPEED was configured according to FEC used. So
+ if only FEC2 was used, this caused the real MII_SPEED register in
+ FEC1 to stay uninitalised, leqading to "mii_send STUCK!" messages.
+ Fix: always configure MII_SPEED on FEC1 only.
+ Patch by Markus Klotzbuecher, 12 Jul 2006
+
+* Add support for SPC1920 board.
+ Patch by Markus Klotzbuecher, 12 Jul 2006
+
+* MCC200 board: support console on any one of the Quad UART ports.
+
+* Fix error in flash protection calculation on MCC200 board.
+
+* Major PCMCIA Cleanup to make code better readable and maintainable.
+ Notes:
+ - Board-dependend code for RPXLITE and RPXCLASSIC-based boards
+ placed to the drivers/rpx_pmcia.c file to avoid duplication.
+ Same for TQM8xx-based boards (drivers/tqm8xx_pmcia.c).
+ - drivers/i82365.c has been split into two parts located at
+ board/atc/ti113x.c and board/cpc45/pd67290.c (ATC and CPC45 are
+ the only boards using CONFIG_82365).
+ - Changes were tested for clean build and *very* *few* boards.
+
+* Fix timer problems on AMCC yucca board.
+ Set Timer Clock Select to use CPU clock as a timer input source.
+
+* Bring yucca config more in line with other AMCC boards.
-commit 2047672684cf85cb6f96a1fbc993180aaaf19a99
-Author: Jon Loeliger <jdl@freescale.com>
-Date: Fri Oct 20 15:50:15 2006 -0500
+* Add AMCC bamboo board to MAKEALL build script.
- Converted all 85xx boards to use a common FSL I2C driver.
- Introduced COFIG_FSL_I2C to select the common FSL I2C driver.
- And removed hard i2c path from a few u-boot.lds scipts too.
- Minor whitespace cleanups along the way.
+* Fix AMCC bamboo eval board compilation errors.
+
+* Add system memory to the PCI region list for AMCC PPC44x CPUs.
+ Enabled it for Yucca board.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
+* Cleanup config file and bootup output for Yucca board.
-commit 4d45f69e362b05892c9e92a7907e5820995612aa
-Author: Jon Loeliger <jdl@freescale.com>
-Date: Thu Oct 19 12:02:24 2006 -0500
+* Fix CONFIG_440_GX define usage.
- Rewrite a series of goto statements as a sequences of
- conditional expressions instead.
+* Remove autogenerated bmp_logo.h file.
- Use consistent return code 0/-1 for good/bad indicators.
+* Add support for AMCC 440SPe CPU based eval board (Yucca).
- Include one fewer file if the driver isn't used at all.
+* Call serial_initialize() before first debug() is used.
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
+* Cleanup trab board for GCC-4.x
-commit 7237c033b02fe295880435f1eb80819a0c987532
-Author: Jon Loeliger <jdl@freescale.com>
-Date: Thu Oct 19 11:02:16 2006 -0500
+* VoiceBlue update: use new MTD flash partitioning methods, use more
+ reasonable TEXT_BASE, update default environment and enable keyed
+ autoboot.
+ Patch by Ladislav Michl, 16. Aug 2005
- Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.c
+* Add forgotten changes for the PLEB 2 Board.
+ Patch by David Snowdon, 13. Aug 2005
- in an effort to begin to unify the umpteen FSL I2C drivers that
- are all otherwise very similar.
+* Add support for wrPPMC7xx/74xx boards
+ Patch by Richard Danter, 12 Aug 2005
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
+* Add support for gth2 board
+ Patch by Thomas Lange, Aug 11 2005
-commit 13a7fcdf37f6ea9429ae04c9df67f893364cfe4b
-Author: Jon Loeliger <jdl@freescale.com>
-Date: Thu Oct 19 11:33:52 2006 -0500
+* Add support for CONFIG_SERIAL_MULTI on MPC5xxx
+ Patch by Martin Krause, 8 Jun 2006
- * Fix a bunch of compiler warnings for gcc 4.0
+ This patch supports two serial consoles on boards with
+ a MPC5xxx CPU. The console can be switched at runtime
+ by setting stdin, stdout and stderr to the desired serial
+ interface (serial0 or serial1). The PSCs to be used as
+ console port are definded by CONFIG_PSC_CONSOLE
+ and CONFIG_PSC_CONSOLE2.
+ See README.serial_multi for details.
- Signed-off-by: Matthew McClintock <msm@freescale.com>
+* Bugfix in I2C initialisation on S3C2400.
+ If the bus is blocked because of a previously interrupted
+ transfer, up to eleven clocks are generated on the I2CSCL
+ line to complete the transfer and to free the bus.
+ With this fix pin I2CSCL (PG6) is really configured as GPIO
+ so the clock pulses are really generated.
+ Patch by Martin Krause, 04 Apr 2006
-commit af9e1f5b9e6f9ce810f5e8bf2961c9542a5865c2
-Author: Stefan Roese <sr@denx.de>
-Date: Tue Oct 17 06:14:31 2006 +0200
+* Fix DDR6 errata on TQM834x boards
+ Patch by Thomas Waehner, 07 Mar 2006
+
+* Remove obsolete flash driver board/tqm5200/flash.c
+ Patch by Martin Krause, 11 Jan 2006
+
+* Update configuration for CMC-PU2 board
+ Patch by Martin Krause, 17 Nov 2005
+
+* Add support for PS/2 keyboard on TQM85xx board
+ Patch by Martin Krause, 07 Nov 2005
+
+ Tested on a STK85XX baseboard. Make sure the PS/2 controller
+ has been programmed. Jumper Settings: X66 1-2, 9-10; X61 2-3
+
+* Fix TRAB channel switching delay for trab_fkt.bin standalone applikation
+ In tsc2000_read_channel() the delay after setting the multiplexer
+ to a temperature channel is increased from 1,5 ms to 10 ms. This
+ is to allow the multiplexer inputs to stabilize after huge steps
+ of the input signal level.
+ Patch by Martin Krause, 08 Nov 2005
+
+* Adjust TQM5200 make targets
+ Make the automatic CS configuration the default.
+ The dedicated configurations CONFIG_TQM5200_AA, CONFIG_TQM5200_AB
+ and CONFIG_TQM5200_AC are removed.
+ "TQM5200_config" is now the default for STK52XX.200 base boards.
+ On a STK52XX.100 base board "TQM5200_STK100_config" must be used.
+ Patch by Martin Krause, 07 Nov 2005
+
+* Fix setting of environment variable "ver" on trab board
+ The environment variable "ver" is now set before
+ do_auto_update() is called, so that "ver" can be used
+ in USB update scripts.
+ Patch by Martin Krause, 27 Oct 2005
+
+* Fix wrong usage of udelay() in led_blink() on trab board
+ Patch by Martin Krause, 27 Oct 2005
+
+* Fix udelay bug in vfd.c for trab board
+ Patch by Martin Krause, 27 Oct 2005
+
+* Disable JFFS2 support for trab board
+ Patch by Martin Krause, 27 Oct 2005
+
+* Change mtdparts definition on trab board to match current flash map
+ Patch by Martin Krause, 27 Oct 2005
+
+* Fix memory init problems on MCC200 board
+
+* Fix IxEthDB.h to compile again
+ Patch by Stefan Roese, 14 Jun 2006
+
+* Minor cleanup for PCS440EP board
+ Patch by Stefan Roese, 13 Jun 2006
+
+* Add MCF5282 support (without preloader)
+ relocate ichache_State to ram
+ u-boot can run from internal flash
+ Add EB+MCF-EV123 board support.
+ Add m68k Boards to MAKEALL
+ Patch from Jens Scharsig, 08 Aug 2005
+
+* Nios II - Add Altera EP1C20, EP1S10 and EP1S40 boards
+ Patch by Scott McNutt, 08 Jun 2006
+
+* Nios II - Add EPCS Controller bootrom work-around
+ -When booting from an epcs controller, the epcs bootrom may leave the
+ slave select in an asserted state causing soft reset hang. This
+ patch ensures slave select is negated at reset.
+ Patch by Scott McNutt, 08 Jun 2006
+
+* Update PK1C20 board
+ -Update base addresses for standard configuration
+ -Eliminate use of CACHE_BYPASS in board code
+ Patch by Scott McNutt, 08 Jun 2006
+
+* Nios II - Fix I/O Macros and mini-app stubs
+ -Fix asm/io.h macros
+ -Eliminate use of CACHE_BYPASS in cpu code
+ -Eliminate assembler warnings
+ -Fix mini-app stubs and force no small data
+ Patch by Scott McNutt, 08 Jun 2006
+
+* Fix U-Boot environment sector protection on MCC200 board
+
+* Minor cleanup for PCS440EP board
+
+* Update PCS440EP port to fit into one flash device (incl. environment)
+ Patch by Stefan Roese, 06 Jun 2006
+
+* Add support for PCS440EP board
+ Patch by Stefan Roese, 02 Jun 2006
+
+* Fix examples/Makefile; some build targets were lost
+
+* Fix watchdog handling in CFI flash driver
+ Just use udelay() when waiting for status changes which will
+ implicitely trigger the watchdog.
+
+* Fix PCI to memory window size problems on PM82x boards
+ We use the "automatic" mode that was used for the MPC8266ADS and
+ MPC8272 boards. Eventually this should be used on all boards?]
+ Patch by Wolfgang Grandegger, 17 Jan 2006
+
+* Correct GPIO setup (UART1/IRQ's) on yosemite & yellowstone
+ Patch by Stefan Roese, 29 May 2006
+
+* Update Intel IXP4xx support
+ - Add IXP4xx NPE ethernet MAC support
+ - Add support for Intel IXDPG425 board
+ - Add support for Prodrive PDNB3 board
+ - Add IRQ support
+ Patch by Stefan Roese, 23 May 2006
+
+* Fix problem in PVR detection for 440GR
+ Patch by Stefan Roese, 18 May 2006
+
+* Fix gcc 3.4.x AFLAGS setting for m68k platform.
+
+* Enable autoboot for M5271EVB board.
+
+* Changed default ramdisk addr in yosemite/yellowstone ports
+ Patch by Stefan Roese, 15 May 2006
+
+* Fix PCMCIA support on virtlab2
+
+* Add support for VirtLab2 board
+ (needed because of differences in the PCMCIA hardware).
+
+* Minor cleanup.
+
+* Update yosemite configuration to enable flash write buffer support
+ Patch by Stefan Roese, 10 May 2006
+
+* Fix compile warnings in common/xyzModem.c
+ Patch by Stefan Roese, 10 May 2006
+
+* Add support for AMCC 440EP Rev C and 440GR Rev B
+ Patch by John Otken, 08 May 2006
+
+* OMAP 5912/OSK: update EMIFS CS1 timings:
+ Problems have been seen in the linux kernel's smc91x network driver
+ due to improper bus timings. The latest 2.6 OMAP kernels currently
+ have a workaround, but this fix belongs in u-boot.
+ Patch by Kevin Hilman, 13 Oct 2005
+
+* Fix REG_MPU_LOAD_TIMER definition in multiple OMAP ports
+ Patch by Hiroki Kaminaga, 11 Mar 2006
+
+* Update omap5912osk board support
+ - Fix OMAP support that omap5912osk compiles in current source tree
+ - Update with code from "http://omap.spectrumdigital.com/osk5912"
+ to fix problems with DDR initialization
+ - Fix timer setup
+ - Use CFI flash driver and support complete 32MB of onboard flash
+ - Add "print_cpuinfo()" and "checkboard()" functions to display
+ CPU (with frequency) and Board infos
+ Patch by Stefan Roese, 10 May 2006
+
+* Fix watchdog issues for ColdFire boards.
+
+* Add M5271EVB board support.
+
+* Make R5200 specific low level initialization board conditional.
+
+* Update CPU target identification strings for ColdFire family.
+
+* Update register definitions for MCF5271.
+
+* Fix serial console support for MCF5271.
+
+* Fixes for gcc 3.4 based m68k toolchain,
+ based on patch by Jate Sujjavanich.
+
+* Fix lowboot support on MCC200 board
+
+* Merged MPC8349ADS and MPC8349EMDS ports into MPC8349EMDS port:
+ - Removed MPC8349ADS port
+ - Added PCI support to MPC8349ADS
+ - reworked memory map to allow mapping of all regions with BATs
+ Patch by Kumar Gala, 20 Apr 2006
+
+* Coding Style cleanup
+
+* Write RTC seconds first to maintain settings integrity per
+ Maxim/Dallas DS1306 data sheet.
+ Patch by Alan J. Luse, 02 May 2006
+
+* Scheduled for removal: strnicmp() which is unused
+
+* Update for Intel Monahans boards:
+ - support for magic key detection and handling on delta board
+ - NAND support for zylonite board + some minor cleanup
+
+* Declare load_serial_ymodem() when using CFG_CMD_LOADB.
+ Patch by Jon Loeliger, 01 May 2006
+
+* Fixed handling of bad checksums with "mkimage -l"
+
+* Added support for BC3450 board
+ Patch by Stefan Strobl, 21 Oct 2005
+
+* Update for NC650 board:
+ - Support rev1 and rev2 hardware
+ - adapt to new NAND layer
+ - add CP850 configuration based on NC650
+
+* MPC5200: enable snooping of DMA transactions on XLB even if no PCI
+ is configured; othrwise DMA accesses aren't cache coherent which
+ causes for example USB to fail.
+
+* Some code cleanup
+
+* Fix dbau1x00 boards broken by dbau1550 patch
+ PLL:s were not set for boards other than 1550.
+ Flash CFI caused card to hang due to undefined CFG_FLASH_BANKS_LIST.
+ Default boot is now bootp for cards other than 1550.
+ Patch by Thomas Lange, 10 Aug 2005
+
+* Fixes common/cmd_flash.c:
+ - fix some compiler/parser error, if using m68k tool chain
+ - optical fix for protect on/off all messages, if using more
+ then one bank
+ Patch by Jens Scharsig, 28 Jul 2005
+
+* Fix Quad UART mapping on MCC200 board due to new HW revision
+
+* Fix JFFS2 support for legacy NAND driver.
+
+* Remove dependencies between DoC code and old legacy NAND driver.
+
+* Fix PM828_PCI target, for which PCI was *not* configured in.
+
+* Fix Lite5200B support: initialize SDelay register
+ See Freescale's AN3221 "MPC5200B SDRAM Initialization and
+ Configuration", 3.3.1 SDelay--MBAR + 0x0190
+
+* Changes/fixes for drivers/cfi_flash.c:
+
+ - Add Intel legacy lock/unlock support to common CFI driver
+
+ On some Intel flash's (e.g. Intel J3) legacy unlocking is
+ supported, meaning that unlocking of one sector will unlock
+ all sectors of this bank. Using this feature, unlocking
+ of all sectors upon startup (via env var "unlock=yes") will
+ get much faster.
+
+ - Fixed problem with multiple reads of envronment variable
+ "unlock" as pointed out by Reinhard Arlt & Anders Larsen.
+
+ - Removed unwanted linefeeds from "protect" command when
+ CFG_FLASH_PROTECTION is enabled.
+
+ - Changed p3p400 board to use CFG_FLASH_PROTECTION
+
+ Patch by Stefan Roese, 01 Apr 2006
+
+* Changes/fixes for drivers/cfi_flash.c:
+ - Correctly handle the cases where CFG_HZ != 1000 (several
+ XScale-based boards)
+ - Fix the timeout calculation of buffered writes (off by a
+ factor of 1000)
+ Patch by Anders Larsen, 31 Mar 2006
+
+* Updates to common PPC4xx onboard (DDR)SDRAM init code (405 and 440)
+
+ 405 SDRAM: - The SDRAM parameters can now be defined in the board
+ config file and the 405 SDRAM controller values will
+ be calculated upon bootup (see PPChameleonEVB).
+ When those settings are not defined in the board
+ config file, the register setup will be as it is now,
+ so this implementation should not break any current
+ design using this code.
+
+ Thanks to Andrea Marson from DAVE for this patch.
+
+ 440 DDR: - Added function sdram_tr1_set to auto calculate the
+ TR1 value for the DDR.
+ - Added ECC support (see p3p440).
+
+ Patch by Stefan Roese, 17 Mar 2006
+
+* Fix CONFIG_SKIP_LOWLEVEL_INIT dependency in cpu/arm920t/start.S
+ Patch by Peter Menzebach, 13 Oct 2005 [DNX#2006040142000473]
+
+* Add support for ymodem protocol download
+ Patch by Stefano Babic, 29 Mar 2006
+
+* Memory Map Update for Delta board: U-Boot is at 0x80000000-0x84000000
+ Merge from Markus Klotzbücher's repo, 01 Apr 2006
+
+* GCC-4.x fixes: clean up global data pointer initialization for all
+ boards
+
+* Update for Delta board:
+ - redundant NAND environment
+ - misc Monahans cleanups (remove dead code etc.)
+ - DA9030 Initialization; some minimal changes to PXA I2C driver to
+ make it work with the Monahans.
+ - Make Monahans clock frequency configurable using
+ CFG_MONAHANS_RUN_MODE_OSC_RATIO and
+ CFG_MONAHANS_TURBO_RUN_MODE_RATIO.
+ Merge from Markus Klotzbücher's repo, 25 Mar 2006
+
+* Enable Quad UART om MCC200 board.
+
+* Cleanup MCC200 board configuration; omit non-existent stuff.
+
+* Add support for MPC859/866 Rev. A.0
+
+* Add command for handling DDR ECC registers on MPC8349EE MDS board.
+
+* Fix DDR ECC bit definitions for MPC83xx.
+
+* Add initial support for MPC8349E MDS board.
+
+* Add support for ECC DDR initialization on MPC83xx.
+
+* Add DMA support for MPC83xx.
+
+* Add sync in do_reset() routine for MPC83xx after RPR register
+ was written to. It is need on some targets when BAT translation
+ is enabled.
+
+* Add bit definitions for MPC83xx DDR controller registers.
+
+* Add Dcbz(), Dcbi() and Dcbf() routines for MPC83xx.
+
+* Correct shift offsets in icache_status and dcache_status for MPC83xx.
+
+* Add support for DS1374 RTC chip.
+
+* Add support for Lite5200B board.
+ Patch by Patch by Jose Maria (Txema) Lopez, 16 Jan 2006
+
+* Apply SoC concept to arm926ejs CPUs, i.e. move the SoC specific
+ timer and cpu_reset code from cpu/$(CPU) into the new
+ cpu/$(CPU)/$(SOC) directories
+ Patch by Andreas Engel, 13 Mar 2006
+
+* Change max size of uncompressed uImage's to 8MByte and add
+ CFG_BOOTM_LEN to adjust this setting.
+
+ As mentioned by Robin Getz on 2005-05-24 the size of uncompressed
+ uImages was restricted to 4MBytes. This default size is now
+ increased to 8Mbytes and can be overrided by setting CFG_BOOTM_LEN
+ in the board config file.
+
+ Patch by Stefan Roese, 13 Mar 2006
+
+* Fix problem with updated PCI code in cpu/ppc4xx/405gp_pci.c
+ Patch by Stefan Roese, 13 Mar 2006
+
+* cpu/ppc4xx/start.S : exceptions are enabled after relocation
+ Patch by Cedric Vincent, 06 Jul 2005
+
+* au1x00_eth.c: check malloc return value and abort if it failed
+ Patch by Andrew Dyer, 26 Jul 2005
+
+* Change the sequence of events in soft_i2c.c:send_ack() to keep from
+ incorrectly generating start/stop conditions on the bus.
+ Patch by Andrew Dyer, 26 Jul 2005
+
+* Fix bug in [id]cache_status commands for MPC85xx processors;
+ should look at LSB of L1CSRn registers to determine if L1 cache is
+ enabled, not the MSB.
+ Patch by Murray Jensen, 19 Jul 2005
+
+* Fix array overflow with fw_setenv on uninitialised environment
+ Patch by Murray Jensen, 15 Jul 2005
+
+* Add support for EmbeddedPlanet EP88x boards
+ Patch by Yuli Barcohen, 13 Jul 2005
+
+* Remove board specific configuration includes from the common xilinx
+ ethernet and iic adapter code.
+ Patch by Michael Libeskind, 12 Jul 2005
+
+* Add Nat Semi DP83865 PHY support to MPC85xx TSEC driver
+ Patch by Murray Jensen, 08 Jul 2005
+
+* Add (some) definitions for the MPC85xx local bus controller
+ Patch by Murray Jensen, 08 Jul 2005
+
+* Add CPM2 I/O pin functions for MPC85xx processors
+ Patch by Murray Jensen, 08 Jul 2005
+
+* Fix compile problem
+
+* Added PCI support for MPC8349ADS board
+ Patch by Kumar Gala 11 Jan 2006
+
+* Enable address translation on MPC83xx
+ Patch by Kumar Gala, 10 Feb 2006
+
+* Decopuled setting of OR/BR and LBLAWBAR/LBLAWAR on MPC83xx
+ Patch by Kumar Gala, 25 Jan 2006
+
+* Fixed defines for MPC83xx SICRL register to match current specs
+ Patch by Kumar Gala, 23 Jan 2006
+
+* Only disable the MPC83xx watchdog if its enabled out of reset.
+ If its disabled out of reset SW can later enable it if so desired
+ Patch by Kumar Gala, 11 Jan 2006
+
+* Allow config of GPIO direction & data registers at boot on 83xx
+ Patch by Kumar Gala, 11 Jan 2006
+
+* Enable time handling on 83xx
+ Patch by Kumar Gala, 11 Jan 2006
+
+* Make System IO Config Registers board configurable on MPC83xx
+ Patch by Kumar Gala, 11 Jan 2006
+
+* Fixed PCI indirect config ops to handle multiple PCI controllers
+ We need to adjust the bus number we are trying to access based
+ on which PCI controller its on
+ Patch by Kumar Gala, 12 Jan 2006
+
+* Report back PCI bus when doing table based device config
+ Patch by Kumar Gala, 11 Jan 2006
+
+* Added support for PCI prefetchable region and BARs
+ If a host controller sets up a region as prefetchable and
+ a device's BAR denotes it as prefetchable, allocate the
+ BAR into the prefetch region.
+
+ If a BAR is prefetchable and no prefetchable region has
+ been setup by the controller we fall back to allocating
+ the BAR into the normally memory region.
+ Patch by Kumar Gala, 11 Jan 2006
+
+* Add helper function for generic flat device tree fixups for mpc83xx
+ Patch by Kumar Gala, 11 Jan 2006
+
+* Add support for passing initrd information via flat device tree
+ Patch by Kumar Gala, 11 Jan 2006
+
+* Added OF_STDOUT_PATH and OF_SOC
+
+ OF_STDOUT_PATH specifies the path to the device the kernel can use
+ for console output
+
+ OF_SOC specifies the proper name of the SOC node if one exists.
+ Patch by Kumar Gala, 11 Jan 2006
+
+* Allow board code to fixup the flat device tree before booting a kernel
+ Patch by Kumar Gala, 11 Jan 2006
+
+* Added CONFIG_ options for bd_t and env in flat dev tree
+
+ CONFIG_OF_HAS_BD_T will put a copy of the bd_t
+ into the resulting flat device tree.
+
+ CONFIG_OF_HAS_UBOOT_ENV will copy the environment
+ variables from u-boot into the flat device tree
+
+ Patch by Kumar Gala, 11 Jan 2006
+
+* Add support for the DHCP vendor optional bootfile (#67).
+ Ignores the vendor TFTP server name option (#66).
+ Patch by Murray Jensen, 30 Jun 2005
+
+* Fix a HW timing issue on 8548 CDS for eTSEC 3 in RGMII mode
+ Patch by Andy Fleming, 14 Jun 2005
+
+* Fix bad register definitions for LTX971 PHY on MPC85xx boards.
+ Patch by Gerhard Jaeger, 21 Jun 2005
+
+* Add netconsole and some more commands to RPXlite_DW board
+ Patch by Sam Song, 19 Jun 2005
+
+* Fix bad declaration on pci_cfgfunc_nothing
+ Patch by Sam Song, 19 Jun 2005
+
+* Adjust "echo" as a default command
+ Patch by Sam Song, 19 Jun 2005
+
+* Fix PCIDF calculation in cpu/mpc8260/speed.c for MPC8280EC
+ Patch by KokHow Teh, 16 Jun 2005
+
+* Add crc of data to jffs2 (in jffs2_1pass_build_lists()).
+ Patch by Rick Bronson, 15 Jun 2005
+
+* Coding Style cleanup
+
+* Avoid dereferencing NULL in find_cmd() if no valid commands were found
+ Patch by Andrew Dyer, 13 Jun 2005
+
+* Add ADI Blackfin support
+ - add support for Analog Devices Blackfin BF533 CPU
+ - add support for the ADI BF533 Stamp uClinux board
+ - add support for the ADI BF533 EZKit board
+ Patches by Richard Klingler, 11 Jun 2005
+
+* Add loads of ntohl() in image header handling
+ Patch by Steven Scholz, 10 Jun 2005
+
+* Switch MPC86xADS and MPC885ADS boards to use cpuclk environment
+ variable to set clock
+ Patch by Yuli Barcohen, 05 Jun 2005
+
+* RPXlite configuration fixes
+ - Use correct flash sector size
+ - Use correct memory test end address
+ - Add support for bzip2 compression
+ - Various small fixes
+ Patch by Yuli Barcohen, 05 Jun 2005
+
+* Memory configuration changes for ZPC.1900 board
+ - Fix SDRAM timing on both local bus and 60x bus
+ - Add support for second flash bank (SIMM)
+ - Change boot flash base
+ Patch by Yuli Barcohen, 05 Jun 2005
+
+* Add support for Adder boards with 16MB SDRAM;
+ add support for second FEC on Adder87x board.
+ Patch by Yuli Barcohen, 05 Jun 2005
+
+* Fix conditional for including ks8695eth driver
+ Patch by Greg Ungerer, 04 Jun 2005
+
+* Fix Makefile: include config.mk only after CROSS_COMPILE is defined
+ Patch by Friedrich Lobenstock, 02 Jun 2005
+
+* Fix comment in common/soft_i2c.c
+ Patches by Peter Korsgaard/Tolunay Orkun, 26 May 2005
+
+* Cleanup compiler warnings.
+ Patch by Greg Ungerer, 21 May 2005
+
+* Word alignment fixes for word aligned NS16550 UART
+ Patch by Jean-Paul Saman, 01 Mar 2005
+
+ Fixes bug with UART that only supports word aligned access: removed
+ "__attribute__ ((packed));" for "(CFG_NS16550_REG_SIZE == 4)" some
+ (broken!) versions of GCC generate byte accesses when encountering
+ the packed attribute regardless if the struct is already correctly
+ aligned for a platform. Peripherals that can only handle word
+ aligned access won't work properly when accessed with byte access.
+ The struct NS16550 is already word aligned for REG_SIZE = 4, so
+ there is no need to packed the struct in that case.
+
+* Fix behaviour if gatewayip is not set
+ Patch by Robin Gilks, 23 Dec 2004
+
+* Fix cleanup for netstart board.
+ Remove build results from repository
+
+* Some code cleanup for GCC 4.x
+
+* Fixes to support environment in NAND flash;
+ enable NAND flash based environment for delta board.
+
+* Add support for Intel Monahans CPU on Zylonite and Delta boards
+ (This is Work in Progress!)
+
+* Add support for TQM8260-AI boards.
+
+* Minor code cleanup
+
+* Merge the new NAND code (testing-NAND brach); see doc/README.nand
+ Rewrite of NAND code based on what is in 2.6.12 Linux kernel
+ Patch by Ladislav Michl, 29 Jun 2005
+
+* Add lowboot target to mcc200 board
+ Patch by Stefan Roese, 4 Mar 2006
+
+* Fix problem with flash_get_size() from CFI driver update
+ Patch by Stefan Roese, 1 Mar 2006
+
+* Make CFG_NO_FLASH work on ARM systems
+ Patch by Markus Klotzbuecher, 27 Feb 2006
+
+* Update mcc200 config: Disable PCI and DoC, use 133 MHz IPB clock,
+ use hush shell.
+
+* Convert mcc200 to use common CFI flash driver
+ Patch by Stefan Roese, 28 Feb 2006
+
+* Add env-variable "unlock" to handle initial state of sectors
+ (locked/unlocked).
+
+ Only the U-Boot image and it's environment is protected,
+ all other sectors are unprotected (unlocked) if flash
+ hardware protection is used (CFG_FLASH_PROTECTION) and
+ the environment variable "unlock" is set to "yes".
+
+ Patch by Stefan Roese, 28 Feb 2006
+
+* Update drivers/cfi_flash.c:
+ - find_sector() called in both versions of flash_write_cfiword()
+ Patch by Peter Pearse, 27th Feb 2006
+
+* CFI support for a x8/x16 AMD/Spansion flash configured in x8 mode
+ Patch by Jose Maria Lopez, 16 Jan 2006
+
+* Add support for AMD/Spansion Flashes in flash_write_cfibuffer
+ Patch by Alex Bastos and Thomas Schaefer, 2005-08-29
+
+* Changes/fixes for drivers/cfi_flash.c:
+ We *should* check if there are any error bits if the previous call
+ returned ERR_OK (Otherwise we will have output an error message in
+ flash_status_check() already.) The original code would only check for
+ error bits if flash_status_check() returns ERR_TIMEOUT.
+ Patch by Marcus Hall, 23 Aug 2005
+
+* Changes/fixes for drivers/cfi_flash.c:
+ - Add CFG_FLASH_PROTECT_CLEAR on drivers/cfi_flash.c
+ - Prohibit buffer write when buffer_size is 1 on drivers/cfi_flash.c
+ Patch by Sangmoon Kim, 19 Aug 2005
+
+* Fixes for drivers/cfi_flash.c:
+ - Fix wrong timeout value usage in flash_status_check()
+ - Round write_tout up when converting to msec in flash_get_size()
+ - Remove clearing flash status at the end of flash_write_cfibuffer()
+ which sets Intel 28F640J3 flash back to command mode on CSB472
+ Patch by Tolunay Orkun, 02 July 2005
+
+* Add basic support for the SMMACO4 Board from PanDaCom.
+ Patch by Heiko Schocher, 20 Feb 2006
+
+* Add GIT version information (commid ID) to untagged U-Boot versions
+
+ As done in the linux kernel, the U-Boot version (U_BOOT_VERSION)
+ of all unreleased (untagged) U-Boot images will be automatically
+ extended upon compiletime with a part of the GIT commit ID and
+ possibly with "dirty" if uncommited changes are detected.
+
+ Here an example for the resulting version:
+ "U-Boot 1.1.4-g3457ac18-dirty"
+
+ The version is now maintained in the toplevel Makefile and the
+ version headers are autogenerated.
+
+ Patch by Stefan Roese, 9 Feb 2006
+
+* Update default environment for INKA4x00 board.
+
+* Convert CPCI750 to use common CFI flash driver
+ Patch by Reinhard Arlt, 8 Feb 2006
+
+* Various changes to esd HH405 board specific files
+ Patch by Matthias Fuchs, 07 Feb 2006
+
+* Cleanup U-Boot boot messages on ARM.
+
+ To match the U-Boot user interface on ARM platforms to the U-Boot
+ standard (as on PPC platforms), some messages with debug character
+ are removed from the default U-Boot build.
+ Enable DEBUG for lib_arm/board.c to enable debug messages.
+ New CONFIG_DISPLAY_CPUINFO and CONFIG_DISPLAY_BOARDINFO options.
+ Patch by Stefan Roese, 24 Jan 2006
+
+* Fix various compiler warnings on ppc4xx builds (ELDK 4.0)
+ Patch by Stefan Roese, 18 Jan 2006
+
+* Add VGA support (CT69000) to CPCI750 board.
+ Insert missing __le32_to_cpu() for filesize in ext2fs_read_file().
+ Patch by Reinhard Arlt, 30 Dec 2005
+
+* PMC405 and CPCI405: Moved configuration of pci resources
+ into config file.
+ PMC405 and CPCI2DP: Added firmware download and booting via pci.
+ Patch by Matthias Fuchs, 20 Dec 2005
+
+* Add ColdFire targets to MAKEALL script
+ Patch by Zachary Landau, 26 Jan 2006
+
+* Add support for r5200 board
+ Patch by Zachary Landau, 26 Jan 2006
+
+* Add support for Freescale M5271 processor
+ Patch by Zachary Landau, 26 Jan 2006
+
+* Fix 28F256J3A support on PM520 board
+ (without bank-switching only 32 MB can be accessed)
+
+* Fix mkimage bug with multifile images created on 64 bit systems.
+
+* Add support for 28F256J3A flash (=> 64 MB) on PM520 board
+
+* Fix compiler problem with at91rm9200dk board.
+ Patch by Eugen Bigz, 19 Dec 2005
+
+======================================================================
+Changes for U-Boot 1.1.4:
+======================================================================
+
+* Changes to Yellowstone & Yosemite 440EP/GR eval boards:
+ - Changed GPIO setup to enable another address line in order to
+ address 64M of FLASH.
+ - Added function sdram_tr1_set to auto calculate the tr1 value for
+ the DDR.
+ Patch by Steven Blakeslee, 12 Dec 2005
+
+* MPC5200: Set PCI retry counter to 0 = infinite retry;
+ The default of 255 is too short for slow devices.
+ Patch by Martin Nykodym, 12 Dec 2005
+
+* Change port configuration for O2DNT (CODEC1 on PSC1).
+
+* Fix register for PCI async mode on PPC440EP
+ Patch by Youngchul Bang, 08 Dec 2005
+
+* Fix U-Boot linking problems (add .eh_frame segment to linker script)
+ This segment may be required by some libgcc.a functions
+ (like _udivdi3).
+
+* Fix DPRAM offset/size for MPC8541/8555.
+ Simplify TQM85xx Makefile handling.
+
+* Fix data overflow (typo?) in rtc/ds1302.c
+
+* Fix U-Boot compilation for MIPS boards using ELDK 4.0
+
+* Add support for TQM8541/8555 boards, TQM85xx support reworked:
+ - Support for TQM8541/8555 boards added.
+ - Complete rework of TQM8540/8560 support.
+ - Common TQM85xx code now supports all current TQM85xx platforms
+ (TQM8540/8541/8555/8560).
+ - DDR SDRAM size detection added.
+ - CAS latency default values can be overwritten by setting "serial#"
+ to e.g. "ABC0001 casl=25" -> CAS latency 2.5 will be used.
+ If problems are detected with this non default CAS latency,
+ the default values will be used instead.
+ - Flash size detection added.
+ - Moved FCC ethernet driver initialization behind TSEC driver init
+ -> TSEC is first device.
+ Patch by Stefan Roese, 30 Nov 2005
+
+* Add support for AMCC 440SP, add support for AMCC Luan 440SP eval board.
+ Patch by John Otken, 23 Nov 2005
+
+* Changed PPC44x startup message (cpu info, speed...) to common style:
+ On PPC44x platforms, the startup message generated in "cpu.c" only
+ comprised the ppc type and revision but not additional information
+ like speed etc. Those speed infos where printed in the board specific
+ code. This new implementation now prints all CPU infos in the common
+ cpu specific code. No board specific code is needed anymore and
+ therefore removed from all current 44x implementations.
+ Patch by Stefan Roese, 27 Nov 2005
+
+* Adjust TQM834x PHY addresses for latest hardware revision.
+
+* Increase malloc arena on TQM5200 board to 256 kB.
+ With 64 kb uniform flash sector size the old value of 128 kB was
+ too small.
+
+* Fix miiphy global data initialization (problem on 4xx boards when
+ no ethaddr is assigned). Initialization moved from
+ miiphy_register() to eth_initialize().
+
+ Based on initial patch for 4xx platform by Matthias Fuchs.
+
+* Remove unnnecessary #include <linux/types.h> from include/asm-*/u-boot.h
+
+* Allow use of include/image.h and include/asm-*/u-boot.h in proprietary code.
+ The COPYING file was extended to make clear that these files can be
+ used in non-GPL code, too.
+ Also, a corresponding note was placed in the headers of the affected files.
+
+* Add support for Prodrive P3P440 board:
+ - Added onboard PPC440 DDR autodetection in cpu/ppc/sdram.c
+ - CFG_FLASH_QUIET_TEST added to use the common CFI driver
+ for bank autodetection
+ Patch by Stefan Roese, 22 Nov 2005
+
+* Change all '$(...)' variable references into '${...}'
+ which makes the environment compatible with the hush shell.
+ WARNING: Support for the old '$(...)' syntax will be
+ discontinued in a later version.
+
+* Minor changes to init flags in TQM834x PCI.
+
+* Fix Bamboo DDR SDRAM initialization (problem with onboard SDRAM)
+ Patch by Stefan Roese, 15 Nov 2005
+
+* New PPC 405EP board added: CMS700
+ Added CONFIG_NET_MULTI for VOM405 board.
+ Added reset_phy() for VOM405 board.
+ Patch by Matthias Fuchs, 09 Nov 2005
+
+* Updated PCI mapping for esd CPCI2DP board.
+ Add support for error LED.
+ Patch by Matthias Fuchs, 07 Nov 2005
+
+* Fix MPC85xx PCI support (pci_register_hose() before pci config access)
+ Patch by Stefan Roese, 07 Nov 2005
+
+* Correct PPC Timebase register definitions (SPRN_TBRL...)
+ Patch by Stefan Roese, 07 Nov 2005
+
+* Adjust bd->bi_flashstart on Yellowstone & Yosemite to correct size
+ Patch by Stefan Roese, 05 Nov 2005
+
+* Additional fix for external IRQ config on Yellowstone & Yosemite
+ Patch by Stefan Roese, 03 Nov 2005
+
+* Add support for Ocotea pass 3 with 440GX Rev. F
+ Patch by Stefan Roese, 01 Nov 2005
+
+* Fix external IRQ configuration on Yellowstone & Yosemite
+ Patch by Stefan Roese, 28 Oct 2005
+
+* Add support for multiple PHYs.
+ Tested on the following boards:
+ cmcpu2 (at91rm9200/ether.c)
+ PPChameleon (ppc4xx/4xx_enet.c)
+ yukon (mpc8220/fec.c)
+ uc100 (mpc8xx/fec.c)
+ tqm834x (mpc834x/tsec.c) with EEPRO100
+ lite5200 (mpc5xxx/fec.c) with EEPRO100 card (drivers/eepro100.c)
+ Main changes include:
+ common/miiphyutil.c
+ - miiphy_register routine was added to allow multiple PHYs to be registered
+ - miiphy_read and miiphy_write are now defined in this file, and
+ require additional argument (char *devname)
+ - other miiphy_* routines also require additional device name argument
+ ../lib_i386/board.c
+ ../lib_ppc/board.c
+ Calling reset_phy() was moved to be executed *after* eth_initialize().
+ This is necessary as now some of the implementations of reset_phy()
+ may need to use miiphy_reset() which is not allowed before eth_initialize()
+ as eth_initialize registers all required miiphy_* routines.
+ Tested on IP860 and PHY initializes properly after this change.
+
+* Correct includes for flat tree builder.
+
+* Fix conflicting types (flash_write()) in trab auto_update.c.
+
+* Add PCI support for the TQM834x board.
+
+* Add missing 4xx board to MAKEALL
+ Patch by Stefan Roese, 20 Oct 2005
+
+* Fix conflicting types (flash_write()) in esd auto_update.c
+ Patch by Stefan Roese, 20 Oct 2005
+
+* Fix problem with sleep in NetConsole (use get_timer())
+ Patch by Stefan Roese, 20 Oct 2005
+
+* Add NetConsole Support for AMCC eval boards
+ Patch by Stefan Roese, 20 Oct 2005
+
+* Fix NetConsole support on 4xx (only print eth link on 1st transfer)
+ Patch by Stefan Roese, 18 Oct 2005
+
+* Add fat & ext2 support to AMCC 440EP boards Yosemite & Bamboo.
+ Fix identation on ext2ls help entry.
+ Patch by Stefan Roese, 14 Oct 2005
+
+* Add support for TQM834x boards.
+ Cleanup.
+
+* Cleanup for GCC-4.x
+
+* Add documentation for Open Firmware Flat Tree and usage.
+ Patch by Pantelis Antoniou, 13 Oct 2005
+
+* Add missing files for Pantelis Antoniou's patch
+ Patch by Pantelis Antoniou, 04 Sep 2005
+
+* Fix problem in ppc4xx eth-driver without ethaddr (only without
+ CONFIG_NET_MULTI set)
+ Patch by Stefan Roese, 10 Oct 2005
+
+* Fix gzip bmp support (test if malloc fails, warning when truncated).
+ Increase CFG_VIDEO_LOGO_MAX_SIZE on HH405 board.
+ Patch by Stefan Roese, 07 Oct 2005
+
+* Add support for OF flat tree for the STXtc board.
+ Patch by Pantelis Antoniou, 04 Sep 2005
+
+* Support passing of OF flat trees to the kernel.
+ Patch by Pantelis Antoniou, 04 Sep 2005
+
+* Cleanup
+
+* Add support for NetSilicon NS7520 processor.
+ Patch by Art Shipkowski, 12 May 2005
+
+* Add support for AP1000 board.
+ Patch by James MacAulay, 07 Oct 2005
+
+* Eliminate hard-coded address of Ethernet transfer buffer on at91rm9200
+ Patch by Anders Larsen, 07 Oct 2005
+
+ The Atmel errata #11 states that the transfer buffer descriptor
+ table must be aligned on a 16-word boundary. As it turned out, this
+ is insufficient - it seems the table must be aligned on a boundary
+ at least as large as the table itself (in Linux this is not an
+ issue - the table is aligned on a PAGE_SIZE (4096) boundary).
+
+* Fixed compilation for ARM when using a (standard) hard-FP toolchain
+ Patch by Anders Larsen, 07 Oct 2005
+
+* Cleanup warnings for cpu/arm720t & cpu/arm1136 files.
+ sed the linker scripts, rather than pre-process them.
+ Patch by Peter Pearse, 07 Oct 2005
+
+* Update make target for ARM supported boards.
+ Use lowlevel_init() instead of platformsetup() [rename].
+ Patch by Peter Pearse, 06 Oct 2005
+
+* Fix booting from serial dataflash on AT91RM9200
+ Patch by Peter Menzebach, 29 Aug 2005
+
+* Add JFFS2 support for TRAB board
+ Patch by Martin Krause, 25 Aug 2005
+
+* Remove unnecessary dependency of netconsole on CONFIG_NET_MULTI
+ Patch by Marcus Hall, 24 Aug 2005
+
+* Fix the machine-id of the Cogent csb637 board
+ Patch by Anders Larsen, 05 Oct 2005
+
+* Complete support for the KwikByte KB920x boards
+ Patch by Anders Larsen, 05 Oct 2005
+
+* Set the AT91RM9200 clock to asynchronous mode
+ Patch by Anders Larsen, 03 May 2005
+
+* Set the AT91RM9200 clock to synchronous mode
+ Patch by Anders Larsen, 29 Apr 2005
+
+* Add support for Cogent csb637
+ Patch by Anders Larsen, 29 Apr 2005
+
+* Fix dm9161.c initialization
+ Patch by Anders Larsen, 29 Apr 2005
+
+* Fix problems introduced by Patch by Steven Scholz, 02 Mar 2005
+ (8e2be51de8dd03c1ce4d06cbb18ad06133d47cd5)
+
+* Move dm9161.c and lxt972.c into cpu/arm920t/at91rm9200
+ Patch by Anders Larsen, 29 Apr 2005
+
+* Fix device partition intialization for SystemACE disks.
+ Patch by Stephen Williams, 28 Apr 2005
+
+* Added support for KwikByte KB920x boards (based on AT91RM9200)
+ Patch by Matt ?? <kb9200_dev@kwikbyte.com>, 27 Apr 2005
+
+* Add support for S29GL064M-R3 flash chip on xsengine board
+ Patch by Kurt Stremerch, 18 Apr 2005
+
+* E500 update: repoint IVPR to RAM when code is relocated
+ Patch by Kylo Ginsberg, 13 Apr 2005
+
+* Fix loop end test in lib_generic/string.c:strswab()
+ Patch by Andrew Dyer, October 10, 2005
+ Signed-off-by: Andrew Dyer <amdyer@gmail.com>
+
+* Cleanup
+
+* Update ARM Integrator boards:
+ Correct addessing errors in platform files.
+ Split off common core module data from Integrator header files to
+ include/armcoremodule.h.
+ Patch by Peter Pearse, 04 Oct 2005
+
+* Make sure only supported compiler options are used
+ Import "cc-option" shell function from kernel and
+ use it to get the correct ARM GCC options for individual CPUs
+ Patch by Peter Pearse, 30 Jun 2005
+
+* Fix 440GR to print correct cpu revision
+ Patch by Stefan Roese, 04 Oct 2005
+
+* Change board message on AMCC Yosemite & Yellowstone to common style
+ Patch by Stefan Roese, 03 Oct 2005
+
+* Fix compiler warning
+
+* Fix FEC PHY addresses for TQM85xx boards
+
+* Fix uninitialized variable problem in hush shell
+ Patch by Lars Rostock, 26 Sep 2005
+
+* Undo change of f6e20fc6ca... to include/configs/trab.h
+ (Must have been an accident?)
+
+* Add support for AT91RM9200 OHCI Controller.
+ Patch by Eric Benard, 07 Apr 2005
+
+* Update ARM mach-types.h
+ Patch by Eric Benard, 07 Apr 2005
+
+* Add support for MP2USB board.
+ Patch by Eric Benard, 07 Apr 2005
+
+* Add board support for armadillo HT1070
+ Patch by Rowel Atienza, 06 Apr 2005
+
+* Second Ethernet address enabled for MPC885ADS and MPC8272ADS.
+ Patch by Vitaly Bordug, 30 Mar 2005
+
+* Add iopset command on mpc8xx
+ Patch by Daniel Eisenhut, 25 Mar 2005
+
+* Add support for MII in eepro100 driver.
+ Patch by Gleb Natapov, 21 Mar 2005
+
+* Fixes to the Lubbock (PXA 25x) support:
+ - Resolve the FIXME with respect to saving the u-boot environment.
+ - Make the default load address land in real memory.
+ - Fix lan91c96 SMC_{in,out}{b,w,l}() macros
+ Patch by David Brownell, 10 Mar 2005
+
+* Add Barco Streaming Video Card (SVC) and Sample Compress Network (SCN) board
+ Patch by Marc Leeman, 04 Mar 2005
+
+* OMAP242x H4 board update
+ - fix for ES2 differences.
+ - switch to using the cfi_flash driver.
+ - fix SRAM build address.
+ - fix for GP device operation.
+ - unlock SRAM for GP devices.
+ - display more device information.
+ - fix potential deadlock in omap24xx_i2c driver.
+ - fix DLL load values to match dpllout*1 operation.
+ - fix 2nd chip select init for combo DDR device.
+ - add support for CFI Intel 28F256L18 on H4 board.
+ Patch by Richard Woodruff, 03 Mar 2005
+
+* Fix formating in include/asm-arm/arch-at91rm9200/AT91RM9200.h
+ Patch by Steven Scholz, 02 Mar 2005
+
+* Fix typo in eth.c
+ Patch by Ara Avanesyan, 24 Feb 2005
+
+* Remove unneeded #include <malloc.h>
+ Patch by Ladislav Michl, 22 Feb 2005
+
+* Add cramfs support for m68k
+ Patch by Zachary Landau, 21 Feb 2005
+
+* Update ep8260: Fix flash timeouts; improve clock resolution for faster UARTs
+ Patch by Jeff Angielski, 21 Feb 2005
+
+* Fix au1x00_serial baud rate calculation:
+ remove hardcoded cpu clock divisor and use register instead;
+ round up instead of truncate
+ Patch by Andrew Dyer, 15 Feb 2005
+
+* Add Xilinx Spartan3 family FPGA support
+ Patch by Kurt Stremerch, 14 Feb 2005
+
+* Fix drivers/cfi_flash.c: use info->reset_cmd instead of FLASH_CMD_RESET
+ Patch by Zachary Landau, 11 Feb 2005
+
+* Fix VOH405 Support
+ Patch by Matthias Fuchs, 25 Sep 2005
+
+* Added support for PCI bridge on MPC8272ADS
+ Patch by Vitaly Bordug, Feb 09 2005
+
+* Update multicore CM9XX support for Integrator AP to allow booting from flash
+ Patch by Jean-Paul Saman, 8 Feb 2005
+
+* Fix strswab() to reliably find end of string
+ Patch by Andrew Dyer, 08 Feb 2005
+
+* Fix typos in include/ppc440.h
+ Patch by Andrew E Mileski, 04 Feb 2005
+
+* Add Vibren (was Accelent) PXA255 IDP Support
+ Patch by Cliff Brake, 04 Feb 2005
+
+* Fix tools/bmp_logo.c using incorrect offset to pixel data
+ Patch by Andrew Dyer, 31 Jan 2005
+
+* Add ARM946E cpu and core module targets; remap memory to 0x00000000
+ Patch by Peter Pearse, 2 Feb 2005
+
+* Fix error handling in tools/env/fw_env.c
+ Patch by Ara Avanesyan, 01 Feb 2005
+
+* Fix MGT5100 PSC baudrate calculation
+ Patch by Sebastian Schau, 27 Jan 2005
+
+* OMAP242x fix for GP device booting
+ - Add SRAM unlock for GP devices.
+ - Change DDR DLL unlock value to allow DPLLout*1 operation.
+ Patches by Richard Woodruff, 21 Jan 2005:
+
+* Add support for AMD's Pb1x00 eval board;
+ add MII routines to the au1x00 ethernet driver;
+ add USB ohci driver (work in progress)
+ Patch by Thomas Sailer, 20 Jan 2005
+
+* Update omap5912osk board
+ Use drivers/cfi_flash.c instead of private flash driver;
+ Remove hardcoded personalized settings from omap5912osk.h;
+ Fix spacing with (RO) marks in 'flinfo' output.
+ Patch by Michael Bendzick, 14 Jan 2005
+
+* Fix warnings for PCI code on ixp
+ Patch by Joe <lgxue@yahoo.com>, 13 Jan 2005
+
+* virtex2 fix for bogus download error messages
+ The virtex2 FPGA download code watches for init going active during
+ a download of config data as an error condition. init also goes
+ active after a configuration is finished in concert with the done
+ signal. So far, the code does not check for done active until all
+ of the configuration data is sent. If configuration data has a few
+ extra pad bytes at the end, this would cause an error message even
+ though the download had suceeded.
+ NOTE: virtex2 slave serial and spartan2 versions may still have the
+ same problem.
+ Patch by Andrew Dyer, 12 Jan 2005
+
+* Optimize flash_make_cmd in drivers/cfi_flash.c for little endian
+ Fix "WARNING: flash_make_cmd: unsuppported LittleEndian mode"
+ message when probing for nonexistent flash in little endian mode.
+ As a side effect more efficient and smaller code is generated,
+ which is always a Good Thing (TM).
+ Patch by Ladislav Michl, 24 Sep 2005
+
+* Update for TFTP using a fixed UDP port
+ Use the approved environment variable names. Added "tftpdstp" to
+ allow ports other than 69 per Tolunay Orkun's recommendation.
+ Patch by Jerry Van Baren, 12 Jan 2005
+
+* Allow to force TFTP to use a fixed UDP port
+ (Add a configuration option CONFIG_TFTP_PORT and optional env
+ variable tftpport)
+ Patch by Jerry Van Baren, 10 Jan 2005
+
+* Fix ethernet timeouts on dbau1550 and other au1x00 systems
+ Patch by Leif Lindholm, 29 Dec 2004
+
+* Cleanup: fix broken builds
+
+* Fix PHY address argument passing with mii info command
+ Patch by Andrew Dyer, 28 Dec 2004
+
+* Cleanup (PPC4xx is AMCC now)
+
+* esd CPCI2DP board added
+ Patch by Matthias Fuchs, 22 Sep 2005
+
+* esd PMC405 board updated
+ Patch by Matthias Fuchs, 22 Sep 2005
+
+* Add SM501 support to HH405 board.
+ Add support for gzip compressed bmp's (CONFIG_VIDEO_BMP_GZIP).
+ Add support for eeprom write-enable (CFG_EEPROM_WREN).
+ Patch by Stefan Roese, 22 Sep 2005
+
+* Fix autonegotiation in tsec ethernet driver
+ Patch by Stefan Roese, 21 Sep 2005
+
+* Fix bug in auto_update (trab board)
+ Patch by Martin Krause, 16 Sep 2005
+
+* Fix computation of framebuffer palette for 8bpp LCD bitmaps
+ Patch by Francesco Mandracci, 16 Sep 2005
+
+* Update configuration for INKA4x0 board
+
+* Update configuration for PM854 board
+ Based on patch by R. Loeffl, 20 Jul 2005
+
+* Add PCI support to TQM8540 and TQM8560 boards
+ Patch by Stefan Roese, 15 Sep 2005
+
+* Update AMCC Yosemite to get a consistent setup for all AMCC eval
+ boards (baudrate, environment...). Flash driver fixed.
+ Patch by Stefan Roese, 15 Sep 2005
+
+* Fix problem in 440GP ethernet driver (ebony). Add support for 2nd
+ ethernet port on ebony.
+ Patch by Stefan Roese, 7 Sep 2005
+
+* Added support for mtddevnum and mtddevname variables (mtdparts command)
+
+* Change default console baud rate for stxxtc board
+
+* Add I2C support to TQM8540 and TQM8560 boards (EEPROM, RTC, LM75-DTT).
+ Patch by Stefan Roese, 31 Aug 2005
+
+* Fix default command set (don't include CFG_CMD_DISPLAY command)
+ Patch by Pantelis Antoniou, 02 Sep 2005
+
+* Cleanup
+
+* Enable SM712 driver support for HMI1001 board.
+
+* Fix problems with ld version 2.16 (dot outside sections problem)
+ Pointed out by Gerhard Jaeger, 31 Aug 2005;
+ cf. http://sourceware.org/ml/binutils/2005-08/msg00412.html
+
+* Prepare U-Boot for gcc-4.x: fix global data pointer initialization
+
+* Adjust CS3 timings on HMI1001 board for dot matrix display under Linux
+
+* Add keyboard and dot matrix display support for HMI1001 board.
+
+* Prepare U-Boot for gcc-4.x
+
+* Fixed Bamboo port to enable running without DDR-DIMM
+ (Bamboo has also 64MB onboard DDR)
+ Patch by Stefan Roese, 24 Aug 2005
+
+* Merged 405gp_enet.c and 440gx_enet.c to generic 4xx_enet.c
+ now handling all 4xx cpu's
+ Patch by Stefan Roese, 16 Aug 2005
+
+* Fix make dependencies for at91rm9200 and ks8695 cpus
+ Patch by Steven Scholz, 23 Aug 2005
+
+* Add JFFS2 support for TQM5200 board
+
+* Add esd cpci5200 and pf5200 boards
+ Patch by Reinhard Arlt, 22 Aug 2005
+
+* Fix sysclock for TQM8540 and TQM8560 boards
+ Patch by Martin Krause, 25 Jul 2005
+
+* Initialize serial# and ethaddr from manufacturer data in EEPROM on CMC-PU2
+ Patch by Martin Krause, 08 Jun 2005
+
+* Add new board specific commands for TQM5200/STK52XX
+ - Sound commands (beep, wav, sound)
+ - Test commands (led, can, backlight, rs232)
+ Patch by Martin Krause, 02 May 2005
+
+* Change main clock on CMC-PU2 board from 207 MHz to 179 MHz
+ because of a bug in the AT91RM9200 CPU PLL
+ Patch by Martin Krause, 22 Apr 2005
+
+* Add automatic HW detection for another CMC_PU2 variant
+ Patch by Martin Krause, 20 Apr 2005
+
+* Remove CONFIG_AT91RM9200DK in CMC-PU2 configuration
+ Patch by Martin Krause, 19 Apr 2005
+
+* Fix initialization problem on TQM5200 without SM501
+ Patch by Martin Krause, 08 Apr 2005
+
+* Add RTC support for STK52XX.200
+ Patch by Martin Krause, 07 Apr 2005
+
+* Add support for IFM o2dnt board
+
+* Enable PCI on hmi1001 board
+
+* Fix return values of the jffs2 commands ls/fsload/fsinfo,
+ so we can use them to, e.g., check the existence of a file with
+ "if ls foo; then this; else that; fi" in the hush shell
+ Patch by Andreas Engel, 16 August 2005
+
+* Coding style cleanup
+
+* Add support for Silicon Turnkey eXpress XTc (mpc87x/88x) board.
+ Patch by Dan Malek and Pantelis Antoniou, 15 Aug 2005
+
+* Check return value of malloc in 440gx_enet.c
+ Patch by Travis B. Sawyer, 18 Jul 2005
+
+* Add Sandburst Metrobox and Sandburst Karef board support packages.
+ Second serial port on 440GX now defined as a system device.
+ Add 'Short Etch' code for Cicada PHY within 440gx_enet.c
+ Patch by Travis B. Sawyer, 12 Jul 2005
+
+======================================================================
+Changes for U-Boot 1.1.3:
+======================================================================
+
+* Minor code cleanup
+
+* Add forgotten new fils from latest VoiceBlue update
+
+* Make bootretry feature work with hush shell.
+ Caveat: this currently *requires* CONFIG_RESET_TO_RETRY to be set, too.
+ Patch by Andreas Engel, 19 Jul 2005
+
+* Update Hymod Board Database PHP code in "tools" directory
+ Patch by Murray Jensen, 01 Jul 2005
+
+* Make "tr" command use POSIX compliant; export HOSTOS make variable
+ Patch by Murray Jensen, 30 Jun 2005
+
+* Fix Murray Jensen's mail address.
+ Patch by Murray Jensen, 30 Jun 2005
+
+* Preserve PHY_BMCR during a soft reset.
+ Patch by Carl Riechers, 24 Jun 2005
+
+* VoiceBlue update: eeprom tool can also store firmware version now.
+ eeprom.bin is runable by jumping at load address.
+ Patch by Ladislav Michl, 23 May 2005
+
+* Move the AT91RM9200DK to the ARM Systems list.
+ Patch by Anders Larsen, 26 Apr 2005
+
+* Eliminate calls of ARM libgcc.a helper functions _divsi3 and _modsi3
+ Patch by Anders Larsen, 26 Apr 2005
+
+* measure_gclk() is needed when DEBUG is enabled
+ Patch by Bryan O'Donoghue, 25 Apr 2005
+
+* Add UPD-Checksum code, fix problem in net.c (return instead of break)
+ Patch by Reinhard Arlt, 12 Aug 2005
+
+* esd PCI405 board updated
+ Patch by Matthias Fuchs, 28 Jul 2005
+
+* esd WUH405 and DU405 board updated
+ Patch by Matthias Fuchs, 27 Jul 2005
+
+* Fix problem in cmd_nand.c (only when defined CFG_NAND_SKIP_BAD_DOT_I)
+ Patch by Matthias Fuchs, 4 May 2005
+
+* Update AMCC Yosemite to get a consistent setup for all AMCC eval
+ boards (baudrate, environment...). Flash driver fixed.
+ Patch by Stefan Roese, 11 Aug 2005
+
+* Changed AMCC Bubinga (405EP) configuration to support 2nd eth port
+ Patch by Stefan Roese, 11 Aug 2005
+
+* Add NAND FLASH support for AMCC Bamboo 440EP eval board
+ Patch by Stefan Roese, 11 Aug 2005
+
+* Add configuration for IFM AEV FIFO board.
+ Minor coding style cleanup.
+
+* Add configuration for IFM SPI eval board
+
+* Fix CompactFlash problem on HMI1001 board
+
+* Make new "mtdparts" code build with older compilers
+ Patch by Andrea Scian, 09 Aug 2005
+
+* Changed CONFIG_440_GX, CONFIG_440_EP and CONFIG_440_GR options to
+ CONFIG_44GX, CONFIG_440EP and CONFIG_440GR for a consistent design
+ with the 405 defines and the linux kernel defines.
+ Patch by Stefan Roese, 08 Aug 2005
+
+* Fix compiler warnings with older GCC versions
+
+* Add common (with Linux) MTD partition scheme and "mtdparts" command
+
+ Old, obsolete and duplicated code was cleaned up and replace by the
+ new partitioning method. There are two possible approaches now:
+
+ The first one is to define a single, static partition:
+
+ #undef CONFIG_JFFS2_CMDLINE
+ #define CONFIG_JFFS2_DEV "nor0"
+ #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF /* use whole device */
+ #define CONFIG_JFFS2_PART_SIZE 0x00100000 /* use 1MB */
+ #define CONFIG_JFFS2_PART_OFFSET 0x00000000
+
+ The second method uses the mtdparts command line option and dynamic
+ partitioning:
+
+ /* mtdparts command line support */
+ #define CONFIG_JFFS2_CMDLINE
+ #define MTDIDS_DEFAULT "nor1=zuma-1,nor2=zuma-2"
+ #define MTDPARTS_DEFAULT "mtdparts=zuma-1:-(jffs2),zuma-2:-(user)"
+
+ Command line of course produces bigger images, and may be inappropriate
+ for some targets, so by default it's off.
+
+* Fix build problems for PM856 Board
+
+* Fix sign extension bug in 'fpga loadb' command;
+ make 'fpga loadb' always print the file header info
+ Patch by Andrew Dyer, 11 Jan 2005
+
+* Fix errors that occur when accessing SystemACE CF
+ Patch by Jeff Angielski, 09 Jan 2005
+
+* Document switching between U-Boot and PlanetCore on RPXlite
+ by Sam Song, 24 Dec 2004
+
+* Fix PowerQUICC II mask detection.
+ Patch by Eugene Surovegin, 20 Dec 2004
+
+* Add support for Altera NIOS DK1C20 board
+ Patch by Shlomo Kut, 13 Dec 2004
+
+* Add support for ep8248 board
+ Patch by Yuli Barcohen, 12 Dec 2004
+
+ Minor code cleanup.
+
+* Fix baudrate setting for KGDB on MPC8260
+ Patch by HoJin, 11 Dec 2004
+
+* Fix 'mii help' text formatting
+ Patch by Cory Tusar, 10 Dec 2004
+
+* Fix return code of NFS command
+ Patch by Hiroshi Ito, 11 Dec 2004
+
+* Fix typo
+
+* Fix compiler warnings in cpu/ppc4xx/usbdev.c
+ Patch by Steven Blakeslee, 04 Aug 2005
+
+* Add support for AMCC Bamboo PPC440EP eval board
+ Patch by Stefan Roese, 04 Aug 2005
+
+* Patch by Jon Loeliger
+ Fix style issues primarily in 85xx and 83xx boards.
+ - C++ comments
+ - Trailing white space
+ - Indentation not by TAB
+ - Excessive amount of empty lines
+ - Trailing empty lines
+
+* Patch by Ron Alder, 11 Jul 2005
+ Add Xianghua Xiao and Lunsheng Wang's support for the
+ GDA MPC8540 EVAL board.
+
+* Patch by Eran Liberty
+ Add support for the Freescale MPC8349ADS board.
+
+* Patch by Jon Loeliger, 25 Jul 2005
+ Move the TSEC driver out of cpu/mpc85xx as it will be shared
+ by the upcoming mpc83xx family as well.
+
+* Patch by Jon Loeliger, 05 May 2005
+ Implemented support for MPC8548CDS board.
+ Added DDR II support based on SPD values for MPC85xx boards.
+ This roll-up patch also includes bugfies for the previously
+ published patches:
+ DDRII CPO, pre eTSEC, 8548 LBIU, Andy's TSEC, eTSEC 3&4 I/O
+
+* Patch by Jon Loeliger, 10 Feb 2005
+ Add config option CONFIG_HAS_FEC calling out 8540 FEC features.
+
+* Patch by Jon Loeliger, Kumar Gala, 08 Feb 2005
+ For MPC85xxCDS:
+ Adds Relaxed Timing TRLX bit to FLASH ORx regs to allow
+ for faster flash parts.
+ Add documentation for BR/OR for FLASH.
+
+* Patch by Jon Loeliger 08 Feb 2005
+ Determine L2 Cache size dynamically on 85XX boards.
+
+* Patch by Jon Loeliger, Kumar Gala 08 Feb 2005
+ - Convert the CPM2 based functionality to use new CONFIG_CPM2
+ option rather than a myriad of CONFIG_MPC8560-like variants.
+ Applies to MPC85xx and MPC8260 boards, includes stxgp3 and sbc8560.
+ Eliminates the CONFIG_MPC8560 option entirely. Distributes the
+ new CONFIG_CPM2 option to each 8260 board.
+
+* Add support for MicroSys PM856 board
+ Patch by Josef Wagner, 03 Aug 2005
+
+* Minor fixes to PM854 board
+ Patch by Josef Wagner, 03 Aug 2005
+
+* Adjust configuration of XENIAX board
+ (chip select and GPIO required for USB operation)
+
+* Fix typos in cpu/85xx/start.S which caused DataTLB exception to be
+ routed to the Watchdog handler
+ Patch by Eugene Surovegin, 18 Jun 2005
+
+* (re)enabled scsi commands do_scsi() and do_scsiboot()
+ Patch by Denis Peter, 06 Dec 2004
+
+* Fix endianess problem in TFTP / NFS default filenames
+ Patch by Hiroshi Ito, 06 Dec 2004
+
+* Ignore broadcast status bit in received frames in 8260 FCC ethernet
+ loopback test code
+ Patch by Murray Jensen, 18 Jul 2005
+
+* Fix typo in mkconfig script (used == instead of =)
+ Patch by Murray Jensen, 18 Jul 2005
+
+* Cleanup build problems on 64 bit build hosts
+
+* Update MAINTAINERS file
+
+* Patch by Stefan Roese, 01 Aug 2005:
+ - Major cleanup for AMCC eval boards Walnut, Bubinga, Ebony, Ocotea
+ (former IBM eval board). Please see "doc/README.AMCC-eval-boards-cleanup"
+ for details.
+ - Sycamore (PPC405GPr) eval board added (Walnut port is extended
+ to run on both 405GP and 405GPr eval boards).
+
+* Patch by Steven Blakeslee, 27 Jul 2005:
+ - Add support for AMCC PPC440EP/GR.
+ - Add support for AMCC Yosemite PPC440EP eval board.
+ - Add support for AMCC Yellowstone PPC440GR eval board.
+
+* Minor fixes for PPChameleon Board:
+ - fix alignment of NAND size
+ - make code do what the comment says
+
+* Implement h/w sector protection status synchronization at boot.
+ The code is provided for, and was tested on, the Yukon/Alaska
+ and PM520 boards only.
+
+ A bug in flash_real_protect() for the Yukon board was fixed by
+ adding a function that tells if two banks are on one flash chip.
+
+* Fix sysmon POST problem: check I2C error codes
+ This fixes a problem of displaying bogus voltages when the voltages
+ are so low that the I2C devices start failing while the rest of the
+ system keeps running.
+
+* Patch by Cedric Vincent, 6 Jul 2005:
+ Fix CFG_CMD_SETGETDCR handling in "common/cmd_dcr.c"
+
+* Patch by Jon Loeliger, 20 Jul 2005:
+ Add missing PCI IO port definitions.
+
+* Add CompactFlash support for HMI1001 board.
+
+* Adjust printed board ID for LWMON board.
+
+* Fix low-level OHCI transfers for ARM920t and MPC5xxx
+
+* Add new argument format for flash commands to allow for usage like
+ "erase $(addr) +$(filesize)", i. e. a size argument can be used and
+ U-Boot will automaticially find the end of the corresponding sector.
+
+* Patch by Stefan Roese, 5 Jul 2005:
+ Update uc100 board PHY setup
+
+* Patch by Stefan Roese, 1 Jul 2005:
+ Fix PHY address for CATcenter board (now correct!)
+
+* Patch by Stefan Roese, 30 Jun 2005:
+ Fix PHY addresses for PPChameleon and CATcenter boards
+ Change MAINTAINER for most esd boards
+
+* Patch by Detlev Zundel, 30 Jun 2005:
+ Fix LCD logo for lwmon board which got lost in the merge of 8xx and PXA LCD code
+
+* Fix baudrate calculation problem on MPC5200 systems
+
+* Add EEPROM and RTC support for HMI1001 board
+
+* Patch by Detlev Zundel, 20 Jun 2005:
+ Fix initialization of low active GPIO pins on inka4x0 board
+
+* Enable redundant environment, disable HW flash protection of
+ HMI1001 board
+
+* Patch by Travis Sawyer, 10 Jun 2005:
+ Initialize allocated dev and private hw structures
+ after their respective allocation in 440gx_enet.c
+
+* Patch by Steven Scholz, 10 Jun 2005:
+ Fix byteorder problems with second argument of "bootm" with
+ standalone images;
+
+* Add support for HMI1001 board
+
+* Disable "date" and "sntp" commands on TQM866M
+
+* Fix watchdog reset problems on LWMON board
+
+* Patch by Juergen Selent, 17 May 2005:
+ Add support for Funkwerk VoVPN gateway module.
+
+* Cleanup debug code for MPC8220 FEC driver
+
+* Extend burst mode RAM test program to take a loop count
+ (0 = infinite)
+
+* Use CONFIG_DRIVER_KS8695ETH to enable KS8695 ethernet driver on
+ those boards that use it.
+
+* Patches by Greg Ungerer, 19 May 2005:
+ - add support for the KS8695P (ARM 922 based) CPU
+ - add support for the OpenGear CM4008, CM4116 and CM4148 boards
+
+* Patch by Steven Scholz, 19 May 2005:
+ Add support for CONFIG_SERIAL_TAG on ARM boards
+
+* Add PCI support for Sorcery board.
+ Code cleanup (especially Sorcery / Alaska / Yukon serial driver).
+
+* Fix compile problems caused by new burst mode SDRAM test;
+ make port pins to trigger logic analyzer configurable
+
+* Fix timer handling on MPC85xx systems
+
+* Fix debug code in omap5912osk flash driver
+
+* Add support for MPC8247 based "IDS8247" board.
+
+* Add support for 2 x TSEC interfaces on the TQM8540 board.
+
+* On LWMON we must use the watchdog to reset the board as the CPU
+ genereated HRESET pulse is too short to reset the external
+ circuitry.
+
+* Add test tool to exercise SDRAM accesses in burst mode
+ (as standalone program, MPC8xx/PowerPC only)
+
+* Increase CFG_MONITOR_LEN for Rattler board to match actual code
+ size.
+
+* Major upate of JFFS2 code; now in sync with snapshot of MTD CVS of
+ March 13, 2005); new configuration option CONFIG_JFFS2_LZO_LZARI
+ added to support LZO and LZARI compression modes (undefined by
+ default).
+
+* Fix problem with symbolic links in JFFS2 code.
+
+* Use linker ASSERT statement to prevent undetected overlapping of
+ sections on PPChameleon board; other boards might use this, too.
+
+* Patch by Stefan Roese, 03 May 2005:
+ Update for P3G4
+ Fix problems in cmd_universe.c
+
+* Patch by Matthias Fuchs, 03 May 2005:
+ Added missing variable declaration in cmd_nand.c
+ Modified CFG_PCI_PTM1MS in configs/PLU405.h to map 128MB ram
+
+* Fix INKA4x0: use CS1 as gpio_wkup_6 output
+
+* Fix bug in the SDRAM initialization code for canmb, IceCube and
+ PM520 boards.
+ Fix PHY address for canmb board.
+
+* Cleanup serial console baudrate calculation on AT91RM9200;
+ get rid of obsolete CFG_AT91C_BRGR_DIVISOR definition
+
+* Patch by Matthias Fuchs, 18 Apr 2005:
+ Make PCI target address spaces on PMC405 and CPCI405 boards
+ configurable via environment variables
+
+* Auto-size RAM on canmb board.
+
+* Add support for canmb board
+
+* Patch by Stefan Roese, 13 Apr 2005:
+ Update for esd apc405
+
+* Fixes for TQM8560 board:
+ - fix clock rates
+ - remove debug messages
+ - fix flash sector protection
+
+* Patch by Steven Scholz, 07 Apr 2005:
+ Add i2c_reg_write() and i2c_reg_write() for at91rm9200 I2C
+
+* Patches by Steven Scholz, 07 Apr 2005:
+ Fix compiler warning in altera.c
+ Fix warning in cpu/arm920t/at91rm9200/i2c.c
+
+* Patch by Ladislav Michl, 06 Apr 2005:
+ Fix voiceblue configuration.
+
+* Patch by Stefan Roese, 06 Apr 2005:
+ Updates for OCOTEA board:
+ - Changed U-Boot size from 512kByte to 256kByte
+ - Fixed flash driver to support boot from soldered user flash
+ - Added README for switch from PIBS firmware to U-Boot
+
+* Patch by Travis Sawyer, 05 Apr 2005:
+ - Change timer frequency for ppc 440 from 10 ms to 1 ms.
+ Problem found by Andrew Wozniak.
+
+* Patch by Steven Scholz, 06 Apr 2005:
+ - creating SoC subdir for Atmel AT91RM9200 cpu/arm920t/at91rm9200
+ - moving code out of cpu/at91rm9200 into cpu/arm920t/at91rm9200
+
+* Patches by Robert Whaley, 29 Nov 2004:
+ - update the pxa-regs.h file for PXA27x chips
+ - add PXA27x based ADSVIX board
+ - add support for MMC on PXA27x processors
+
+* Patch by Andrew E. Mileski, 28 Nov 2004:
+ Fix PPC4xx SPD SDRAM detection bug
+
+* Patch by Hiroshi Ito, 26 Nov 2004:
+ Fix logic of "test -z" and "test -n" commands
+
+* Patch by Ladislav Michl, 05 Apr 2005:
+ Add support for VoiceBlue board.
+
+* Patch by Ladislav Michl, 05 Apr 2005:
+ Fix netboot_common() prototypes.
+
+* Patch by Steven Scholz, 05 Apr 2005:
+ Use i.MX watchdog timer for reset_cpu()
+
+* Patch by Steven Scholz, 05 Apr 2005:
+ Move reset_cpu() out of cpu/arm920t/start.S into the SoC specific
+ subdirectories cpu/arm920t/imx/ and cpu/arm920t/s3c24x0/
+ (now in interupts.c)
+
+* Add support for MPC8220 based "sorcery" board.
+
+* Add support for TQM8560 board.
+
+* Add FEC support for TQM8540 board.
+ Interfaces are named as follows: "ENET1" - TSEC2, "ENET2" - FEC
+
+* Patch by Martin Krause, 04 Apr 2005:
+ Update default configuration for CMC_PU2 board.
+
+* Patch by Steven Scholz, 04 Apr 2005:
+ - remove all references to CONFIG_INIT_CRITICAL for ARM based boards
+ - introduce two new configuration options instead:
+ CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT
+
+* Patch by Steven Scholz, 04 Apr 2005:
+ Make sure that MDIO clock does not exceed 2.5 MHz on AT91
+
+* Fix timer code for ARM systems: make sure that udelay() does not
+ reset timers so it's save to use udelay() in timeout code.
+
+* Patch by Mathias Küster, 23 Nov 2004:
+ add udelay support for the mcf5282 cpu
+
+* Patch by Tolunay Orkun, 16 November 2004:
+ fix incorrect onboard Xilinx CPLD base address
+
+* Patch by Jerry Van Baren, 08 Nov 2004:
+ - Add low-boot option for MPC8260ADS board (if lowboot is selected,
+ the jumper for the HRCW source should select flash. If lowboot is
+ not selected, the jumper for the HRCW source should select the
+ BCSR.
+ - change default load base address to 0x00400000
+
+* Patch by Yuli Barcohen, 08 Nov 2004:
+ Add support for Analogue & Micro Rattler boards.
+ Tested on Rattler8248.
+
+* Patch by Andre Renaud, 08 Nov 2004:
+ Fix watchdog support in common/lcd.c
+
+* Patch by Marc Leeman, 05 Nov 2003:
+ Enable all 4 PCMBRW buffers for the MPC8245 processor since the CPU
+ bug only affects the XPC8245 processors
+
+* Patches by Josef Wagner, 29 Oct 2004:
+ - Add support for MicroSys CPU87 board
+ - Add support for MicroSys PM854 board
+
+* Patch by Jian Zhang, 02 Nov 2004:
+ Add 16-bit NAND support
+
+* Patch by Scott McNutt, 01 Nov 2004:
+ Add missing NIOS/NIOS2 support for "iminfo" command
+
+* Patch by Detlev Zundel, 29 Oct 2004:
+ Add missing NIOS/NIOS2 support for "mkimage" tool.
+
+* Patch by David Adair, 27 Oct 2004:
+ Add missing 440GX SDRAM Controller reset
+
+* Patch by Steven Scholz, 25 Oct 2004:
+ Declare reset_cpu() in include/common.h instead locally
+
+* Patch by Yusdi Santoso, 22 Oct 2004:
+ - Add support for HIDDEN_DRAGON board
+ - fix endianess problem in driver/rtl1839.c
+
+* Patch by Allen Curtis, 21 Oct 2004:
+ support multiple serial ports
+
+* Patch by Richard Klingler, 03 Apr 2005:
+ Add call to eth_halt() in net/net.c when called functions fail
+ after eth_init() has been called.
+
+* Patch by Sam Song, 3 April 2005:
+ - Update README.Netconsole
+ - Update README
+
+* Prepare for SoC rework of ARM code:
+ - rename CONFIG_BOOTBINFUNC into CONFIG_INIT_CRITICAL
+ - rename memsetup into lowlevel_init (function name and source files)
+ Patch by Steven Scholz, 03 Apr 2005:
+ - create SoC specific directories include/asm-arm/arch-imx and
+ include/asm-arm/arch-s3c24x0
+
+* Fix problems with SNTP support;
+ enable SNTP support in some boards.
+
+* Patches by Martin Krause, 01 Apr 2005:
+ - Fix flash erase timeout on CMC_PU2
+ - Add automatic HW detection for CMC_PU2 and CMC_BASIC
+
+* Patch by Steven Scholz, 13 March 2005:
+ fix cache enabling for AT91RM9200
+
+* Patch by Masami Komiya, 30 Mar 2005:
+ add SNTP support and expand time server and time offset fields of
+ DHCP support. See doc/README.SNTP
+
+* Patch by Steven Scholz, 13 Dec 2004:
+ Fix bug in at91rm920 ethernet driver
+
+* Patch by Steven Scholz, 13 Dec 2004:
+ Remove duplicated code by merging memsetup.S files for
+ at91rm9200 boards into one cpu/at91rm9200/lowlevel.S
+
+* Patch by Detlev Zundel, 31 Mar 2005:
+ Cleanup duplicate definition of overwrite_console()
+
+* Update TQM5200 configuration;
+ prepare for Rev. 200 starter kit boards
+
+* Patch by Scott McNutt, 21 Oct 2004:
+ Add support for Nios-II EPCS Controller core.
+
+* Patch by Scott McNutt, 20 Oct 2004:
+ Nios-II cleanups:
+ - Add sysid command (Nios-II only).
+ - Locate default exception trampoline at proper offset.
+ - Implement I/O routines (readb, writeb, etc)
+ - Implement do_bootm_linux
+
+* Patches by Martin Krause, 22 Mar 2005:
+ - use TQM5200_auto as MAKEALL target for TQM5200 systems
+ - add support for SM501 graphics controller
+ - add support for graphic console on TQM5200
+ - add support for TQM5200 Rev 200
+ - cleanup, fix typo in include/configs/TQM5200.h
+
+* Patch by Manfred Baral, 17 Mar 2005:
+ Fix typo
+
+* Fix RTC configuration for PPChameleon board
+
+* Cleanup, fix typo in include/configs/TQM5200.h
+
+* Patch by Stefan Roese, 16 Mar 2005:
+ Update for esd auto_update and hh405 board
+
+* Adapt for U-Boot image size (new features enabled) on TQM5200
+
+* Update code for TQM8540 board (and 85xx in general):
+ - Change the name of the Ethernet driver: MOTO ENET -> ENET
+ - Reformat boot messages
+ - Enable redundant environment
+ - Replace the -O2 optimization flag with -mno-string
+
+* Patch by David Brownell, 10 Mar 2005:
+ Restore copyright statements in OHCI drivers.
+
+* Add support for TQM8540 board
+
+* Patch by Detlev Zundel, 14 Mar 2005:
+ NC650: changed NAND flash addressing to using UPMB
+
+* Patch by Stefan Roese, 14 Mar 2005:
+ Update for esd voh405 fpga image
+
+* INKA4x0: Allow initialization of LCD backlight dimming from
+ "brightness" environment variable.
+
+* Add port initialization for digital I/O on INKA4x0
+
+* Patch by Stefan Roese, 01 Mar 2005:
+ Update for esd boards dp405 and hub405
+
+* Fix get_partition_info() parameter error in all other calls
+ (common/cmd_ide.c, common/cmd_reiser.c, common/cmd_scsi.c).
+
+* Enable USB and IDE support for INKA4x0 board
+
+* Patch by Andrew Dyer, 28 Feb 2005:
+ fix ext2load passing an incorrect pointer to get_partition_info()
+ resulting in load failure for devices other than 0
+
+* Add support for SRAM and 2 x Quad UARTs on INKA4x0 board
+
+* Cleanup USB and partition defines
+
+* Add support for ext2 filesystems and image timestamps to TQM5200 board
+
+* Add reset code for Coral-P on INKA4x0 board
+
+* Patch by Martin Krause, 28 Jun 2004:
+ Update for TRAB board.
+
+* Fix some missing "volatile"s in MPC5xxx FEC driver
+
+* Fix cirrus voltage detection (for CPC45)
+
+* Fix byteorder problem in usbboot and scsiboot commands.
+
+* Patch by Cajus Hahn, 04 Feb 2005:
+ - don't insist on leading '/' for filename in ext2load
+ - set default partition to useful value (1) in ext2load
+
+* Patch by Andrew Dyer, 08 Jan 2005:
+ fix wrong return codes in ext2 code
+
+* Removed '--no-warn-mismatch' option from Makefile. This option
+ makes 'ld' to overlook binary objects compatibility.
+
+* Moved $(PLATFORM_LIBS) from the library group (--start-group ...
+ --end-group) outside of the group. This will make 'ld' to do
+ _multiple_ search in the library group when resolving symbol
+ references and do only a _single_ seach in libgcc.a after the group
+ search.
+
+* Fix stability problems on CPC45 board again.
+
+* Make image detection for diskboot / usbboot / scsiboot more robust
+ (also check header checksum)
+
+* Update CPC45 board configuration.
+
+* Add USB and PCI support for INKA4x0 board
+
+* Fix IDE stability problems on CPC45 board (needs 2 x EIEIO).
+
+* Code cleanup
+
+* Patch by Robin Getz, 13 Oct 2004:
+ Add standalone application to change SMC91C111 MAC addresses,
+ see examples/README.smc91111_eeprom
+
+* Patch by Xiaogeng (Shawn) Jin, 12 Oct 2004:
+ Fix Flash support for ARM Integrator CP.
+
+* Patch by Richard Woodruff, 10 Jan 2005:
+ Update support for OMAP2420 (ARM11) and H4 board:
+ o clean up and add new types to H4 memory probe code.
+ o fix to work with internal boot.
+ o added PRCM config III operation.
+ o fix marginal flash timings.
+ o add revison ATAG usage.
+ o enable voltage scaling at power chip.
+ o fix compile error for i2c.
+
+* Fix network problem (error when receiving multiple ARP packets)
+
+* Patch by Daniel Poirot, 12 Oct 2004:
+ Add support for Wind River sbc405 board
+
+* Patch by Rainer Brestan, 12 Oct 2004:
+ Make examples/Makefile more robust
+
+* Patch by Sam Song, 11 October 2004:
+ - Add RESET/PREBOOT/AUTOBOOT support for RPXlite_DW board
+ - Adjust CPU:BUS frequency ratio 1:1 when core frequency
+ less than 50MHz
+
+* Patch by Sam Song, 10 Oct 2004:
+ Fix a parameter error in run_command() in main.c
+
+* Patch by Richard Woodruff, 01 Oct 2004:
+ add support for the TI OMAP2420 processor and its H4 reference
+ board
+
+* Patch by Christian Pellegrin, 24 Sep 2004:
+ Added support for NE2000 compatible (DP8390, DP83902) NICs.
+
+* Patch by Leif Lindholm, 23 Sep 2004:
+ add support for the AMD db1550 board
+
+* Patch by Travis Sawyer, 15 Sep 2004:
+ Add CONFIG_SERIAL_MULTI support for ppc4xx,
+ update README.serial_multi
+
+* Patches by David Snowdon, 07 Sep 2004:
+ - add u-boot.hex target in the top level Makefile
+ - add support for the UNSW/NICTA PLEB 2 board (pleb2)
+ - use -mtune=xscale and -march=armv5 options for PXA
+
+* Patch by Florian Schlote, 08 Sep 2004:
+ Add support for SenTec-COBRA5272-board (ColdFire).
+
+* Patch by Gleb Natapov, 07 Sep 2004:
+ mpc824x: set PCI latency timer to a sane value
+ (is 0 after reset).
+
+* Patch by Kurt Stremerch, 03 Sep 2004:
+ Add bitstream configuration option for fpga command (Xilinx only).
+
+* Patch by Kurt Stremerch, 03 Sep 2004:
+ Add Xilinx Spartan2E family FPGA support
+
+* Patch by Jeff Angielski, 02 Sep 2004:
+ Add Added support for H2 revision of the EP8260 board.
+ Fixed formatting for some of the EP8260 related source files.
+
+* Patch by Jon Loeliger, 02 Sep 2004:
+ Reset monitor size back to 256 so environment can be written
+ to flash on MPC85xx ADS and CDS releases.
+
+* Patch by Paolo Broggini, 02 Sep 2004:
+ Make BSS clearing on ARM systems more robust
+
+* Patch by Yue Hu and Joe, 01 Sep 2004:
+ - add PCI support for ixp425;
+ - add EEPRO100 suppor tfor ixdp425 board.
+
+* Fix problem with protected sector detection in driver/cfi_flash.c
+
+======================================================================
+Changes for U-Boot 1.1.2:
+======================================================================
+
+* Code cleanup, mostly for GCC-3.3.x
+
+* Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to
+ pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for
+ additional ethernet addresses.
+
+* Cleanup drivers/i82365.c - avoid duplication of code
+
+* Fix bogus "cannot span across banks" flash error message
+
+* Code cleanup
+
+* Add support for CompactFlash for the CPC45 Board.
+
+* Fix problems with CMC_PU2 flash driver.
+
+* Cleanup:
+ - avoid trigraph warning in fs/ext2/ext2fs.c
+ - rename UC100 -> uc100
+
+* Add support for UC100 board
+
+* Patch by Stefan Roese, 16 Dez 2004:
+ - ext2fs support added
+ - Tundra universe support added
+ - ColdFire MCF5249 support added (no preloader needed!)
+ - MCF5249 board TASREG added
+ - PPC boards added: APC405, CPCI405DT, CPCI750, G2000, HH405,
+ VOM405, WUH405
+ - some esd boards updated
+ - memory commands "mdc" and "mwc" added for cyclic read/write
+ (CONFIG_MX_CYCLIC, see README for further description)
+
+* Add support for INKA4X0 board
+
+* Patch by Steven Scholz, 12 Dec 2004:
+ Fix typo in AT91 memory setup.
+
+* Patch by Martin Krause, 27 Oct 2004:
+ - add support for "STK52xx" board (including PS/2 multiplexer)
+ - add hardware detection for TQM5200
+
+* Clean up CMC PU2 flash driver
+
+* Update MAINTAINERS file
+
+* Fix bug in MPC823 LCD driver
+
+* Fix udelay() on AT91RM9200 for delays < 1 ms.
+
+* Enable long help on CMC PU2 board;
+ fix reset issue;
+ increase CPU speed from 179 to 207 MHz.
+
+* Fix smc91111 ethernet driver for Xaeniax board (need to handle
+ unaligned tail part specially).
+
+* Update for AT91RM9200DK and CMC_PU2 boards:
+ - Enable booting directly from flash
+ - fix CMC_PU2 flash driver
+
+* Fix mkimage usage message
+
+* Map SRAM on NC650 board
+
+* Work around for Ethernet problems on Xaeniax board
+
+* Patch by TsiChung Liew, 23 Sep 2004:
+ - add support for MPC8220 CPU
+ - Add support for Alaska and Yukon boards
+
+* Fix configuration for ERIC board (needs more room)
+
+* Adjust MIPS compiler options at run-time depending on tools version
+ ("-march=4kc -mtune=4kc -Wa,-mips_allow_branch_to_undefined" for new,
+ "-mcpu=4kc" for old tools)
+
+* Add passing of the command line and memory size information to the
+ kernel on xaeniax board.
+
+* Enable NAND flash support for NC650 board.
+
+* Patch by Thomas Lange 07 Oct 2004:
+ Updated README for DBAu1x00 boards to match current status
+
+* Patch by Philippe Robin, 28 Sept 2004:
+ Fix Flash support for Versatile.
+
+* Patch by Roger Blofeld, 16 Sep 2004:
+ Fix timeout for DHCP command retry
+
+* Patch by Pantelis Antoniou, 14 Sep 2004:
+ Fix early serial hang when CONFIG_SERIAL_MULTI is defined.
+
+* Patch by Pantelis Antoniou, 14 Sep 2004:
+ Kick watchdog when bz-decompressing
+
+* Fix CFG_HZ problems on AT91RM9200 systems
+ [Remember: CFG_HZ should be 1000 on ALL systems!]
+
+* Patch by Gridish Shlomi, 30 Aug 2004:
+ - Add support to revA version of PQ27 and PQ27E.
+ - Reverted MPC8260ADS baudrate back to original 115200
+
+* Patch by Hojin, 17 Sep 2004:
+ Fix typo in cfi_flash.c
+
+* Patch by Mark Jonas, 09 September 2004:
+ mtest's data line test (with CFG_ALT_MEMTEST set) returned a wrong
+ error message
+
+* Patch by Mark Jonas, 31 August 2004:
+ Added option CFG_XLB_PIPELINING to enable XLB pipelining. This
+ improves FTP performance for MPC5200 systems. Enabled for IceCube
+ by default.
+
+* Patch by Michael Bendzick, 30 Aug 2004:
+ - Improve platform.S code for omap1510inn that detects whether code
+ is running from SDRAM or not. Patch allows SDRAM to be configured
+ if code is running out of SRAM at 0x20000000.
+
+* Patch by Frederick Klatt, 30 Aug 2004:
+ Add support for the Wind River SBC8540/SBC8560 boards
+
+* Configure SX1 board to use drivers/cfi_flash.c
+
+* Patches by Michael Bendzick, 30 Aug 2004:
+ - Configure omap1510inn board to use drivers/cfi_flash.c
+ - Make drivers/cfi_flash.c protect environment and redundant
+ environment.
+
+* Patch by Steven Scholz, 23 Jun 2004:
+ - Add script (tools/img2brec.sh) to programm U-Boot into
+ (Synch)Flash using the Bootstrap Mode of the MC9328MX1/L
+
+* Patches by Scott McNutt, 24 Aug 2004:
+ - Add support for Altera Nios-II processors.
+ - Add support for Psyent PCI-5441 board.
+ - Add support for Psyent PK1C20 board.
+
+* Patches by Jon Loeliger, 24 Aug 2004:
+ - Add support for the MPC8541 and MPC8555 CDS boards
+ - Cleanup eth?addr handling: make dependent on CONFIG_ETH?ADDR
+ - Convert MPC85xxADS to use common CFI flash driver
+ - Fix PCI window on MPC85xx; remove unneeded PCI initialization
+ from board_early_init_f()
+ - Provide SW workaround for PCI initialization on 85xx CDS
+
+* Patches by George G. Davis, 24 Aug 2004:
+ - Enable ramdisk/initrd tagged param support for omap1610h2_config
+ - Remove static network setup defaults from mx1ads_config
+ - update ARM boards to use constants from mach-types.h
+
+* Patch by Gary Jennejohn, 04 Oct 2004:
+ - fix I2C on at91rm9200
+ - add support for Ricoh RS5C372A RTC
+
+* Patch by Gary Jennejohn, 01 Oct 2004:
+ - add support for CMC PU2 board
+ - add support for I2C on at91rm9200
+
+* Patch by Gary Jennejohn, 28 Sep 2004:
+ fix baudrate handling on at91rm9200
+
+* Patch by Yuli Barcohen, 22 Aug 2004:
+ - remove ZPC.1900 board-specific flash driver;
+ switch the port to generic CFI driver;
+ - port clean-up
+
+* Patch by Hinko Kocevar, 21 Aug 2004:
+ Add calc_fbsize() function used with VIDEOLFB_TAG on TRAB
+
+* Clean up tools/bmp_logo.c to not add trailing white space
+
+* Patch by Hinko Kocevar, 21 Aug 2004:
+ - Group common framebuffer functions in common/lcd.c
+ - Group common framebuffer macros and #defines in include/lcd.h
+ - Provide calc_fbsize() for video ATAG
+
+* Patch by Sam Song, 21 August 2004:
+ - Fix a typo in README
+ - Align "(RO)" output for "flinfo" after "protect on"
+ - Add RESET support for RPXlite_DW board; adjust CPU:BUS frequency
+ ratio 1:1 when core frequency less than 50MHz
+
+* Patches by Hinko Kocevar, 21 Aug 2004:
+ - fix some "use of label at end of compound statement" warnings
+ - Define type of LCD panel on lubbock board if CONFIG_LCD is used
+
+* Patch by Steven Scholz, 16 Aug 2004:
+ - Introducing the concept of SoCs "./cpu/$(CPU)/$(SOC)"
+ - creating subdirs for SoCs ./cpu/arm920t/imx and ./cpu/arm920t/s3c24x0
+ - moving SoC specific code out of cpu/arm920t/ into cpu/arm920t/$(SOC)/
+ - moving drivers/s3c24x0_i2c.c and drivers/serial_imx.c out of drivers/
+ into cpu/arm920t/$(SOC)/
+
+* Patches by Sean Chang, 09 Aug 2004:
+ - Added support for both 8 and 16 bit mode access to System ACE CF
+ through MPU.
+ - Fixed missing System ACE CF device during get FAT partition info
+ in fat_register_device function.
+ - Enabled System ACE CF support on ML300.
+
+* Patch by Sean Chang, 09 Aug 2004:
+ Synch defines for saveenv and do_saveenv functions so they get
+ compiled under the same statement.
+
+* Patch by Sean Chang, 09 Aug 2004:
+ - Added I2C support for ML300.
+ - Added support for ML300 to read out its environment information
+ stored on the EEPROM.
+ - Added support to use board specific parameters as part of
+ U-Boot's environment information.
+ - Updated MLD files to support configuration for new features
+ above.
+
+* Patches by Travis Sawyer, 05 Aug 2004:
+ - Remove incorrect bridge settings for eth group 6
+ - Add call to setup bridge in ppc_440x_eth_initialize
+ - Fix ppc_440x_eth_init to reset the phy only if its the
+ first time through, otherwise, just check the phy for the
+ autonegotiated speed/duplex. This allows the use of netconsole
+ - only print the speed/duplex the first time the phy is reset.
+
+* Patch by Shlomo Kut, 29 Mar 2004:
+ Add support for MKS Instruments "Quantum" board
+
+* Fix build problem with Cogent boards;
+ avoid using <asm/byteorder.h> when using the host compiler
+
+* Patch by Ganapathi C, 04 Aug 2004:
+ Fix NFS timeout issue
+
+* Patch by Yuli Barcohen, 19 Jul 2004:
+ - Fix host tools building in Cygwin environment
+ - Fix header files search order for host tools
+
+* Patch by Tom Armistead, 19 Jul 2004:
+ Fix kgdb.S support for 74xx_75x cpu
+
+* Patch by Jon Loeliger, 15 Jul 2004:
+ Fix MPC85xx I2C driver
+
+* Fix problems with CDROM drive as slave device on Lite5200 IDE bus.
+
+* Patch by Stephen Williams, 15 July 2004
+ Set the PCI class code for JSE board as part of PCI interface setup
+
+* Patch by Michael Bendzick, 15 Jul 2004:
+ Fix problem with writes with odd sizes in drivers/cfi_flash.c when
+ CFG_FLASH_USE_BUFFER_WRITE is set
+
+* Patch by Yuli Barcohen, 13 Jul 2004:
+ Allow clock setting on MPC866/MPC885 series chips according to
+ environment variable `cpuclk'
+
+* Patch by Yuli Barcohen, 20 Apr 2004:
+ Remove unnecessary redefine of CPM_DATAONLY_SIZE for MPC826x
+
+* Patch by Vincent Dubey, 24 Sep 2004:
+ Add support for xaeniax board
+
+* Add comment about non-GPL character of standalone applications to
+ COPYING file
+
+* Fix FEC ethernet problem on NSCU board.
+
+* Patch by Gary Jennejohn, 09 Sep 2004:
+ allow to use USART1 as console port on at91rm9200dk boards
+
+* Patch by Stefan Roese, 16 Sep 2004:
+ Update AR405 board.
+
+* Fix SysClk handling for PPChameleon and CATcenter boards
+
+* Patch by Detlev Zundel, 08 Sep 2004:
+ Update etags build target
+
+* Improve NetConsole support: add support for broadcast destination
+ address and buffered input.
+
+* Cleanup compiler warnings for GCC 3.3.x and later
+
+* Fix problem in cmd_jffs2.c introduced by CFG_JFFS_SINGLE_PART patch
+
+* Add support for IDS "NC650" board
+
+* Add automatic update support for LWMON board
+
+* Clear Block Lock-Bits when erasing flash on LWMON board.
+
+* Fix return code of "fatload" command
+
+* Enable MSDOS/VFAT filesystem support for LWMON board
+
+* Patch by Martin Krause, 03 Aug 2004:
+ change timing for SM501 graphics controller on TQM5200 module
+
+* Patch by Mark Jonas, 13 July 2004:
+ - Total5200 LCD now run in little endian mode. Endianess conversion
+ is done in hardware.
+ - Removed last reference to "console" environment variable.
+
+* Patches by Lars Munch, 12 Jul 2004:
+ - move at45.c to board/at91rm9200dk/ since this is at91rm9200dk
+ board specific
+ - split out the LXT971A PHY from ns_9750_eth.h
+ - split the dm9161 phy part out of at91rm9200_ether.c
+
+* Patch by Andreas Engel, 12 Jul 2004:
+ Replaced hardcoded PL011 clock frequency with config variable.
+ Fixed wrong CONFIG_CMD_DFL doc.
+
+* Patch by Thomas Viehweger, 09 Jun 2004:
+ make it possible to remove chpart when there is only one partition
+
+* Add support for console over UDP (compatible to Ingo Molnar's
+ netconsole patch under Linux)
+
+* Patch by Jon Loeliger, 16 Jul 2004:
+ - support larger DDR memories up to 2G on the PC8540/8560ADS and
+ STXGP3 boards
+ - Made MPC8540/8560ADS be 33Mhz PCI by default.
+ - Removed moldy CONFIG_RAM_AS_FLASH, CFG_FLASH_PORT_WIDTH_16
+ and CONFIG_L2_INIT_RAM options.
+ - Refactor Local Bus initialization out of SDRAM setup.
+ - Re-implement new version of LBC11/DDR11 errata workarounds.
+ - Moved board specific PCI init parts out of CPU directory.
+ - Added TLB entry for PCI-1 IO Memory
+ - Updated README.mpc85xxads
+
+* Patch by Sascha Hauer, 28 Jun:
+ - add generic support for Motorola i.MX architecture
+ - add support for mx1ads, mx1fs2 and scb9328 boards
+
+* Patches by Marc Leeman, 23 Jul 2004:
+ - Add define for the PCI/Memory Buffer Configuration Register
+ - corrected comments in cpu/mpc824x/cpu_init.c
+
+* Add support for multiple serial interfaces
+ (for example to allow modem dial-in / dial-out)
+
+* Patch by Stefan Roese, 15 Jul 2004:
+ cpu/ppc4xx/sdram.c rewritten now using get_ram_size()
+
+* Fix NSCU config; add ethernet wakeup code.
+
+* Add link for preloader for Motorola ColdFire to README.m68k
+
+* Patch by Michael Bendzick, 12 Jul 2004:
+ fix output formatting in drivers/cfi_flash.c
+
+* Patch by Mark Jonas, 02 Jul 2004:
+ Fix lowboot (again) on MPC5xxx
+
+* Patch by Curt Brune, 07 Jul 2004:
+ relocate exception vectors on arm720t if needed
+
+* Patch by George G. Davis, 06 Jul 2004:
+ - update mach-types.h to latest arm.linux.org.uk master list
+ - Set correct OMAP1610 bi_arch_number for build target
+
+* Patch by Curt Brune, 06 Jul 2004:
+ evb4510: add support for timer interrupt; cleanup
+
+* Patch by Dan Poirot, 06 Jul 2004:
+ Fix sbc8260 environment variables
+
+* Cleanup redundand "console" environment variable
+
+* Patch by Mark Jonas, 05 Jul 2004:
+ add support for the Total5100's and Total5200's LCD screen
+
+* Patches by Dan Eisenhut, 01 Jul 2004:
+ - README fixes.
+ - Move doc2000.h include to prevent compiler warning on some boards
+
+* Patch by Mark Jonas, 01 Jul 2004:
+ Added support for Total5100 and Total5200 (Rev.1 and Rev.2)
+ MGT5100 and MPC5200 based Freescale platforms.
+
+* Patch by Philippe Robin, 01 Jul 2004:
+ Add initialization for Integrator and versatile board files.
+
+* Patch by Hinko Kocevar, 01 Jun 2004:
+ Fix VFD FB allocation, add LCD FB allocation on ARM
+
+* Patch by Martin Krause, 30 Jun 2004:
+ Add support for TQM5200 board
+
+* Patch by Martin Krause, 29 Jun 2004:
+ Add loopw command: infinite write loop on address range
+
+* Patches by Yasushi Shoji, 29 Jun 2004:
+ - add empty include/asm-microblaze/processor.h
+ - add to CREDITS and MAINTAINERS
+ - add gd initialization
+ - add MicroBlaze and SUZAKU board to MAKEALL script
+ - add reset support for SUZAKU
+ - add flush_cache() for MicroBlaze
+ - add CFG_FLASH_SIZE to include/configs/suzaku.h since we have fixed
+ size flash memory on SUZAKU
+
+* Patch by Prakash Kumar, 27 Jun 2004:
+ Add support for the PXA250 based Intrinsyc Cerf board.
+
+* Patch by Yasushi Shoji, 27 Jun 2004:
+ fix comment in include/common.h
+
+* Rename SBC8560 into sbc8560 for consistency
+
+* Patch by Daniel Poirot, 24 Jun 2004:
+ Add support for Wind River's sbc8240 board
+
+* Patches by Yasushi Shoji, 26 Jun 2004:
+ - drivers/serial_xuartlite.c: fix "return 0" in void function
+ - add microblaze support to mkimage tool
+
+* Patch by Fred Klatt, 25 Jun 2004:
+ Add support for WindRiver's sbc8560 board
+
+* Patch by Nicolas Lacressonniere, 24 Jun 2004
+ Small Bugs fixes for "at91rm9200dk" board:
+ - Timing modifications for SPI DataFlash access
+ - Fix NAND flash detection bug
+
+* Patch by Nicolas Lacressonniere, 24 Jun 2004:
+ Add Support for Flash AT49BV6416 for AT91RM9200DK board
+
+* Patch by Jon Loeliger, 17 June 2004:
+ Completion of the 8540ADS/8560ADS updates:
+ Fix some PCI and Rapid I/O memory maps,
+ Initialize both TSEC 1 and 2,
+ Initialize SDRAM
+ Update MAINTAINER for 85xx boards and README.mpc85xxads
+
+* Patch by Yuli Barcohen, 16 Jun 2004:
+ Remove obsolete AdderII port which was superseded by unified
+ AdderII/Adder87x port
+
+* Patch by Ladislav Michl, 16 Jun 2004:
+ Fix gcc-3.3.3 warnings for smc91111.c
+
+* Patch by Stefan Roese, 02 Jul 2004:
+ - Fix bug in 405 ethernet driver; allocated data not cleared!
+ - Fix problem in 405 i2c driver; don't try to print without console!
+
+* Patch by Paul Ruhland, 11 Jun 2004:
+ Remove debug code from 'board/lpd7a40x/flash.c'
+
+* Patch by Andrea Marson, 11 Jun 2004:
+ Update for PPChameleon board:
+ - support for SysClk @ 25MHz
+ - support for Silicon Motion SM712 VGA controller
+ - some clean ups
+
+* Patches by Richard Woodruff, 10 Jun 2004:
+ - fix problems with examples/stubs.c for GCC >= 3.4
+ - fix problems with gd initialization
+
+* Patch by Curt Brune, 17 May 2004:
+ - Add support for Samsung S3C4510B CPU (ARM7tdmi based SoC)
+ - Add support for ESPD-Inc. EVB4510 Board
+
+* Patch by Marc Leeman, 11 May 2004:
+ Fix for MPC8245 - reading PPC Memory from another device with the
+ PPC as PCI target device corrupts data due to interenal hardware
+ buffering.
+
+* Fix "cls" command when used with splash screen
+
+* Increase NFS download timeout (now 1 min - 10 sec is to short for a
+ slow download of a big image)
+
+* Add "cls" function to MPC823 LCD driver so we can reinitialize the
+ display even after showing a bitmap
+
+* Patch by Josef Wagner, 04 Jun 2004:
+ - DDR Ram support for PM520 (MPC5200)
+ - support for different flash types (PM520)
+ - USB / IDE / CF-Card / DiskOnChip support for PM520
+ - 8 bit boot rom support for PM520/CE520
+ - Add auto SDRAM module detection for MicroSys CPC45 board (MPC8245)
+ - I2C and RTC support for CPC45
+ - support of new flash type (28F160C3T) for CPC45
+
+* Fix flash parameters passed to Linux for PPChameleon board
+
+* Remove eth_init() from lib_arm/board.c; it's done in net.net.c.
+
+* Patch by Paul Ruhland, 10 Jun 2004:
+ fix support for Logic SDK-LH7A404 board and clean up the
+ LH7A404 register macros.
+
+* Patch by Matthew McClintock, 10 Jun 2004:
+ Modify code to select correct serial clock on Sandpoint8245
+
+* Patch by Robert Schwebel, 10 Jun 2004:
+ Add support for Intel K3 strata flash.
+
+* Patch by Thomas Brand, 10 Jun 2004:
+ Fix "loads" command on DK1S10 board
+
+* Patch by Yuli Barcohen, 09 Jun 2004:
+ Add support for 8MB flash SIMM and JFFS2 file system on
+ Motorola FADS board and its derivatives (MPC86xADS, MPC885ADS).
+
+* Patch by Yuli Barcohen, 09 Jun 2004:
+ Add support for Analogue&Micro Adder87x and the older AdderII board.
+
+* Patch by Ming-Len Wu, 09 Jun 2004:
+ Add suppport for MC9328 (Dargonball) CPU and Motorola MX1ADS board
+
+* Patch by Sam Song, 09 Jun 2004:
+ - Add support for RPXlite_DW board
+ - Update FLASH driver for 4*AM29DL323DB90VI
+ - Add option configuration of CFG_ENV_IS_IN_NVRAM on RPXlite_DW board
+
+* Patch by Mark Jonas, 08 June 2004:
+ - Make MPC5200 boards evaluate the SVR to print processor name and
+ version in checkcpu() (cpu/mpc5xxx/cpu.c).
+
+* Patch by Kai-Uwe Bloem, 06 May 2004:
+ Fix endianess problem in cramfs code
+
+* Patch by Tom Armistead, 04 Jun 2004:
+ Add support for MAX6900 RTC
+
+* Patches by Ladislav Michl, 03 Jun 2004:
+ - fix cfi_flash.c on LE systems
+ - let 'make mrproper' delete u-boot.img as well
+ - turn printf into debug in cfi_flash.c
+
+* Patch by Kurt Stremerch, 28 May 2004:
+ Add support for Exys XSEngine board
+
+* Patch by Martin Krause, 27 May 2004:
+ Fix a MPC5xxx I2C timing issue in i2c_probe().
+
+* Patch by Leif Lindholm, 27 May 2004:
+ Fix board_init_f() for dbau1x00 board.
+
+* Patch by Imre Deak, 26 May 2004:
+ On OMAP1610 platforms check if booting from RAM(CS0) or flash(CS3).
+ Set flash base accordingly, and decide whether to do or skip board
+ specific setup steps.
+
+* Patch by Josef Baumgartner, 26 May 2004:
+ Add missing define in include/asm-m68k/global_data.h
+
+* Patch by Josef Baumgartner, 25 May 2004:
+ Add missing functions get_ticks() and get_tbclk() in lib_m68k/time.c
+
+* Patch by Paul Ruhland, 24 May 2004:
+ fix SDRAM initialization for LPD7A400 board.
+
+* Patch by Jian Zhang, 20 May 2004:
+ add support for environment in NAND flash
+
+* Patch by Yuli Barcohen, 20 May 2004:
+ Add support for Interphase iSPAN boards.
+
+* Patches by Paul Ruhland, 17 May 2004:
+ - Add I/O functions to the smc91111 ethernet driver to support the
+ Logic LPD7A40x boards.
+ - Add support for the Logic Zoom LH7A40x based SDK board(s),
+ specifically the LPD7A400.
+
+* Patches by Robert Schwebel, 15 May 2004:
+ - call MAC address reading code also for SMSC91C111;
+ - make SMSC91C111 timeout configurable, remove duplicate code
+ - fix get_timer() for PXA
+ - update doc/README.JFFS2
+ - use "bootfile" env variable also for jffs2
+
+* Patch by Tolunay Orkun, 14 May 2004:
+ Add support for Cogent CSB472 board (8MB Flash Rev)
+
+* Patch by Thomas Viehweger, 14 May 2004:
+ - flash.h: more flash types added
+ - immap_8260.h: some bits added (useful for RMII)
+ - cmd_coninfo.c: typo corrected, printf -> puts
+ - reduced size by replacing spaces with tab
+
+* Patch by Robert Schwebel, 13 May 2004:
+ Add 'imgextract' command: extract one part of a multi file image.
+
+* Patches by Jon Loeliger, 11 May 2004:
+ Dynamically handle REV1 and REV2 MPC85xx parts.
+ (Jon Loeliger, 10-May-2004).
+ New consistent memory map and Local Access Window across MPC85xx line.
+ New CCSRBAR at 0xE000_0000 now.
+ Add RAPID I/O memory map.
+ New memory map in README.MPC85xxads
+ (Kumar Gala, 10-May-2004)
+ Better board and CPU identification on MPC85xx boards at boot.
+ (Jon Loeliger, 10-May-2004)
+ SDRAM clock control fixes on MPC8540ADS & MPC8560 boards.
+ Some configuration options for MPC8540ADS & MPC8560ADS cleaned up.
+ (Jim Robertson, 10-May-2004)
+ Rewrite of the MPC85xx Three Speed Ethernet Controller (TSEC) driver.
+ Supports multiple PHYs.
+ (Andy Fleming, 10-May-2004)
+ Some README.MPC85xxads updates.
+ (Kumar Gala, 10-May-2004)
+ Copyright updates for "Freescale"
+ (Andy Fleming, 10-May-2004)
+
+* Patch by Stephen Williams, 11 May 2004:
+ Add flash support for ST M29W040B
+ Reduce JSE specific flash.c to remove dead code.
+
+* Patch by Markus Pietrek, 04 May 2004:
+ Fix clear_bss code for ARM systems (all except s3c44b0 which
+ doesn't clear BSS at all?)
+
+* Fix "ping" problem on INC-IP board. Strange problem:
+ Sometimes the store word instruction hangs while writing to one of
+ the Switch registers, but only if the next instruction is 16-byte
+ aligned. Moving the instruction into a separate function somehow
+ makes the problem go away.
+
+* Patch by Rishi Bhattacharya, 08 May 2004:
+ Add support for TI OMAP5912 OSK Board
+
+* Patch by Sam Song May, 07 May 2004:
+ Fix typo of UPM table for rmu board
+
+* Patch by Pantelis Antoniou, 05 May 2004:
+ - Intracom board update.
+ - Add Codec POST.
+
+* Add support for the second Ethernet interface for the 'PPChameleon'
+ board.
+
+* Patch by Dave Peverley, 30 Apr 2004:
+ Add support for OMAP730 Perseus2 Development board
+
+* Patch by Alan J. Luse, 29 Apr 2004:
+ Fix flash chip-select (OR0) option register setting on FADS boards.
+
+* Patch by Alan J. Luse, 29 Apr 2004:
+ Report MII network speed and duplex setting properly when
+ auto-negotiate is not enabled.
+
+* Patch by Jarrett Redd, 29 Apr 2004:
+ Fix hang on reset on Ocotea board due to flash in wrong mode.
+
+* Patch by Dave Peverley, 29 Apr 2004:
+ add MAC address detection to smc91111 driver
+
+* Patch by David Müller, 28 Apr 2004:
+ fix typo in lib_arm/board.c
+
+* Patch by Tolunay Orkun, 20 Apr 2004:
+ - README update: add CONFIG_CSB272 and csb272_config
+ - add descriptions for some MII/PHY options, CONFIG_I2CFAST, and
+ i2cfast environment variable
+
+* Patch by Yuli Barcohen, 19 Apr 2004:
+ - Rename DUET_ADS to MPC885ADS
+ - Rename CONFIG_DUET to CONFIG_MPC885_FAMILY
+ - Rename CONFIG_866_et_al to CONFIG_MPC866_FAMILY
+ - Clean up FADS family port to use the new defines
+
+* Fix PCI support on CPC45 board
+
+* Patch by Scott McNutt, 25 Apr 2004:
+ Add Nios GDB/JTAG Console support:
+ - Add stubs to support gdb via JTAG.
+ - Add support for console over JTAG.
+ - Minor cleanup.
+
+* Add support for CATcenter board (based on PPChameleon ME module)
+
+* Patch by Klaus Heydeck, 12 May 2004:
+ Using external watchdog for KUP4 boards in mpc8xx/cpu.c;
+ load_sernum_ethaddr() for KUP4 boards in lib_ppc/board.c;
+ various changes to KUP4 board specific files
+
+* Fix minor network problem on MPC5200: need some delay between
+ resetting the PHY and sending the first packet. Implemented in a
+ "natural" way by invoking the PHY reset and initialization code
+ only once after power on vs. each time the interface is brought up.
+
+* Add some limited support for low-speed devices to SL811 USB controller
+ (at least "usb reset" now passes successfully and "usb info" displays
+ correct information)
+
+* Change init sequence for multiple network interfaces: initialize
+ on-chip interfaces before external cards.
+
+* Fix memory leak in the NAND-specific JFFS2 code
+
+* Fix SL811 USB controller when attached to a USB hub
+
+* Fix config option spelling in PM520 config file
+
+* Fix PHY discovery problem in cpu/mpc8xx/fec.c (introduced by
+ patches by Pantelis Antoniou, 30 Mar 2004)
+
+* Fix minor NAND JFFS2 related issue
+
+* Fixes for SL811 USB controller:
+ - implement workaround for broken memory stick
+ - improve error handling
+
+* Increase packet send timeout to 1 ms in cpu/mpc8xx/scc.c to better
+ cope with congested networks.
+
+======================================================================
+Changes for U-Boot 1.1.1:
+======================================================================
+
+* Patch by Travis Sawyer, 23 Apr 2004:
+ Fix VSC/CIS 8201 phy descrambler interoperability timing due to
+ errata from Vitesse Semiconductor.
+
+* Patch by Philippe Robin, 22 Apr 2004:
+ Fix ethernet configuration for "versatile" board
+
+* Patch by Kshitij Gupta, 21 Apr 2004:
+ Remove busy loop and use MPU timer fr usleep() on OMAP1510/1610 boards
+
+* Patch by Steven Scholz, 24 Feb 2004:
+ Fix a bug in AT91RM9200 ethernet driver:
+ The MII interface is now initialized before accessing the PHY.
+
+* Patch by John Kerl, 19 Apr 2004:
+ Use U-boot's miiphy.h for PHY register names, rather than
+ introducing a new header file.
+
+* Update pci_ids.h from linux-2.4.26
+
+* Patch by Masami Komiya, 19 Apr 2004:
+ Fix problem cause by VLAN function on little endian architecture
+ without VLAN environment
+
+* Clean up the TQM8xx_YYMHz configurations; allow to use the same
+ binary image for all clock frequencies. Implement run-time
+ optimization of flash access timing based on the actual bus
+ frequency.
+
+* Modify KUP4X board configuration to use SL811 driver for USB memory
+ sticks (including FAT / VFAT filesystem support)
+
+* Add SL811 Host Controller Interface driver for USB
+
+* Add CFG_I2C_EEPROM_ADDR_OVERFLOW desription to README
+
+* Patch by Pantelis Antoniou, 19 Apr 2004:
+ Allow to use shell style syntax (i. e. ${var} ) with standard parser.
+ Minor patches for Intracom boards.
+
+* Patch by Christian Pell, 19 Apr 2004:
+ cleanup support for CF/IDE on PCMCIA for PXA25X
+
+* Temporarily disabled John Kerl's extended MII command code because
+ "miivals.h" is missing
+
+* Patches by Mark Jonas, 13 Apr 2004:
+ - Remove CS0 chip select timing setting from cpu/mpc5xxx/start.S
+ - Add sync instructions to IceCube SDRAM init code
+ - Move SDRAM chip constants into seperate include files
+ - Unify DDR and SDR initialization code
+ - Unify all IceCube (Lite5xxx) target names
+
+* Patch by John Kerl, 16 Apr 2004:
+ Enable ranges in mii command, e.g. mii read 0-1f 0 or
+ mii read 4-7 18-1a. Also add mii dump subcommand for
+ pretty-printing standard regs 0-5.
+
+* Patch by Stephen Williams, 16 April 2004:
+ fix typo in JSE.h; update MAINTAINERS
+
+* Patch by Matthew S. McClintock, 14 Apr 2004:
+ fix initdram function for utx8245 board
+
+* Patch by Markus Pietrek, 14 Apr 2004:
+ use ATAG_INITRD2 instead of deprecated ATAG_INITRD tag
+
+* Patch by Reinhard Meyer, 18 Apr 2004:
+ provide the IDE Reset Function for EMK 5200 boards
+
+* Patch by Masami Komiya, 12 Apr 2004:
+ fix pci_hose_write_config_{byte,word}_via_dword problems
+
+* Patch by Sangmoon Kim, 12 Apr 2004:
+ Update max RAM size for debris board
+
+* Patch by Travis Sawyer, 08 Apr 2004:
+ Add TLB entry for second DIMM slot on ocotea
+
+* Patch by Masami Komiya, 08 Apr 2004:
+ add RTL8169 network driver
+
+* Patch by Dan Malek, 07 Apr 2004:
+ - Add support for RPC/STx GP3, Motorola 8560 board
+ - Update 85xx TSEC driver so it searches MII for first available PHY
+ and uses that one.
+ - Add functions to support console MII commands.
+
+* Patch by Tolunay Orkun, 07 Apr 2004:
+ Move initialization of bi_iic_fast[]
+ from board_init_f() to board_init_r()
+
+* Patch by Yasushi Shoji, 07 Apr 2004:
+ Cleanup microblaze port
+
+* Patch by Sangmoon Kim, 07 Apr 2004:
+ Add auto SDRAM module detection for Debris board
+
+* Patch by Rune Torgersen, 06 Apr 2004:
+ - Fix some PCI problems on the MPC8266ADS board
+ - Fix the location of some PCI entries in the immap structure
+
+* Patch by Yasushi Shoji, 07 Apr 2004:
+ - add support for microblaze processors
+ - add support for AtmarkTechno "suzaku" board
+
+* Configure PPChameleon board to use redundand environment in flash
+
+* Configure PPChameleon board to use JFFS2 NAND support.
+
+* Added support for JFFS2 filesystem (read-only) on top of NAND flash
+
+* Patch by Rune Torgersen, 16 Apr 2004:
+ LBA48 fixes
+
+* Patches by Pantelis Antoniou, 16 Apr 2004:
+ - add support for a new version of an Intracom board and fix
+ various other things on others.
+ - add verify support to the crc32 command (define
+ CONFIG_CRC32_VERIFY to enable it)
+ - fix FEC driver for MPC8xx systems:
+ 1. fix compilation problems for boards that use dynamic
+ allocation of DPRAM
+ 2. shut down FEC after network transfers
+ - HUSH parser fixes:
+ 1. A new test command was added. This is a simplified version of
+ the one in the bourne shell.
+ 2. A new exit command was added which terminates the current
+ executing script.
+ 3. Fixed handing of $? (exit code of last executed command)
+ - Fix some compile problems;
+ add "once" functionality for the netretry variable
+
+* Patch by George G. Davis, 02 Apr 2004:
+ add support for Intel Assabet board
+
+* Patch by Stephen Williams, 01 Apr 2004:
+ Add support for Picture Elements JSE board
+
+* Patch by Christian Pell, 01 Apr 2004:
+ Add CompactFlash support for PXA systems.
+
+* Patches by Pantelis Antoniou, 30 Mar 2004:
+ - add auto-complete support to the U-Boot CLI
+ - add support for NETTA and NETPHONE boards; fix NETVIA board
+ - add support for the Epson 156x series of graphical displays
+ (These displays are serial and not suitable for using a normal
+ framebuffer console on them)
+ - add infrastructure needed in order to POST any DSPs in a board
+ - improve and fix various things in the MPC8xx FEC driver:
+ 1. The new 87x and 88x series of processors have two FECs,
+ and the new driver supports them both.
+ 2. Another change in the 87x/88x series is support for
+ the RMII (Reduced MII) interface. However numerous
+ changes are needed to make it work since the PHYs
+ are connected to the same lines. That means that
+ you have to address them correctly over the MII
+ interface.
+ 3. We now correctly match the MII/RMII interface
+ configuration to what the PHY reports.
+ - Fix problem when readingthe MII status register. Due to the
+ internal design of many PHYs you have to read the register
+ twice. The problem is more apparent in 10Mbit mode.
+ - add new mode ".jffs2s" for reading from a NAND device: it just
+ skips over bad blocks.
+ - add networking support for VLANs (802.1q), and CDP (Cisco
+ Discovery Protocol)
+ - some minor patches / cleanup
+
+* Patch by Yuli Barcohen, 28 Mar 2004:
+ - Add support for MPC8272 family including MPC8247/8248/8271/8272
+ - Add support for MPC8272ADS evaluation board (another flavour of MPC8260ADS)
+ - Change configuration method for MPC8260ADS family
+
+* add startup code to clear the BSS of standalone applications
+
+* Fix if / elif handling bug in HUSH shell
+
+======================================================================
+Changes for U-Boot 1.1.0:
+======================================================================
+
+* Patch by Mark Jonas: Remove config.tmp files only when
+ unconfiguring the board
+
+* Adapt RMU board for bigger flash memory
+
+* Patch by Klaus Heydeck, 13 Mar 2003:
+ Add support for KUP4X Board
+
+* Patch by Pavel Bartusek, 21 Mar 2004
+ Add Reiserfs support
+
+* Patch by Hinko Kocevar, 20 Mar 2004
+ - Add auto-release for SMSC LAN91c111 driver
+ - Add save/restore of PTR and PNR regs as suggested in datasheet
+
+* Patch by Stephen Williams, 19 March 2004
+ Increase speed of sector reads from SystemACE,
+ shorten poll timeout and remove a useless reset
+
+* Patch by Tolunay Orkun, 19 Mar 2004:
+ Make GigE PHY 1000Mbps Speed/Duplex detection conditional
+ (CONFIG_PHY_GIGE)
+
+* Patch by Brad Kemp, 18 Mar 2004:
+ prevent machine checks during a PCI scan
+
+* Patch by Pierre Aubert, 18 Mar 2004:
+ Fix string cleaning in IDE identification
+
+* Patch by Pierre Aubert, 18 Mar 2004:
+ - Unify video mode handling for Chips & Technologies 69000 Video
+ chip and Silicon Motion SMI 712/710/810 Video chip
+ - Add selection of the video output (CRT or LCD) via 'videoout'
+ environment variable for the Silicon Motion
+ - README update
+
+* Patch by Pierre Aubert, 18 Mar 2004:
+ include/common.h typo fix
+
+* Patches by Tolunay Orkun, 17 Mar 2004:
+ - Add support for bd->bi_iic_fast[] initialization via environment
+ variable "i2cfast" (CONFIG_I2CFAST)
+ - Add "i2cfast" u-boot environment variable support for csb272
+
+* Patch by Carl Riechers, 17 Mar 2004:
+ Ignore '\0' characters in console input for use with telnet and
+ telco pads.
+
+* Patch by Leon Kukovec, 17 Mar 2004:
+ typo fix for strswab prototype #ifdef
+
+* Patches by Thomas Viehweger, 16 Mar 2004:
+ - show PCI clock frequency on MPC8260 systems
+ - add FCC_PSMR_RMII flag for HiP7 processors
+ - in do_jffs2_fsload(), take load address from load_addr if not set
+ explicit, update load_addr otherwise
+ - replaced printf by putc/puts when no formatting is needed
+ (smaller code size, faster execution)
+
+* Patch by Phillippe Robin, 16 Mar 2004:
+ avoid dereferencing NULL pointer in lib_arm/armlinux.c
+
+* Patch by Stephen Williams, 15 Mar 2004:
+ Fix CONFIG_SERIAL_SOFTWARE_FIFO documentation
+
+* Patch by Tolunay Orkun, 15 Mar 2004:
+ Initialize bi_opbfreq to real OPB frequency via get_OPB_freq()
+
+* Patch by Travis Sawyer, 15 Mar 2004:
+ Update CREDITS & MAINTAINERS files for PPC440GX & Ocotea port
+
+* Add start-up delay to make sure power has stabilized before
+ attempting to switch on USB on SX1 board.
+
+* Patch by Josef Wagner, 18 Mar 2004:
+ - Add support for MicroSys XM250 board (PXA255)
+ - Add support for MicroSys PM828 board (MPC8280)
+ - Add support for 32 MB Flash on PM825/826
+ - new SDRAM refresh rate for PM825/PM826
+ - added support for MicroSys PM520 (MPC5200)
+ - replaced Query by Identify command in CPU86/flash.c
+ to support 28F160F3B
+
+* Fix wrap around problem with udelay() on ARM920T
+
+* Add support for Macronix flash on TRAB board
+
+* Patch by Pierre Aubert, 15 Mar 2004:
+ Fix buffer overflow in IDE identification
+
+* Fix power-off of LCD for out-of-band temperatures on LWMON board
+
+* Remove redundand #define in IceCube.h
+
+* Patch by Steven Scholz, 27 Feb 2004:
+ - Adding get_ticks() and get_tbclk() for AT91RM9200
+ - Many white space fixes in cpu/at91rm9200/interrupts.c
+
+* Patches by Steven Scholz, 20 Feb 2004:
+ some cleanup in AT91RM9200 related code
+
+* Patches by Travis Sawyer, 12 Mar 2004:
+ - Fix Gigabit Ethernet support for 440GX
+ - Add Gigabit Ethernet Support to MII PHY utilities
+
+* Patch by Brad Kemp, 12 Mar 2004:
+ Fixes for drivers/cfi_flash.c:
+ - Better support for x8/x16 implementations
+ - Added failure for AMD chips attempting to use CFG_FLASH_USE_BUFFER_WRITE
+ - Added defines for AMD command and address constants
+
+* Patch by Leon Kukovec, 12 Mar 2004:
+ Fix get_dentfromdir() to correctly handle deleted dentries
+
+* Patch by George G. Davis, 11 Mar 2004:
+ Remove hard coded network settings in TI OMAP1610 H2
+ default board config
+
+* Patch by George G. Davis, 11 Mar 2004:
+ add support for ADS GraphicsClient+ board.
+
+* Patch by Pierre Aubert, 11 Mar 2004:
+ - add bitmap command and splash screen support in cfb console
+ - add [optional] origin in the bitmap display command
+
+* Patch by Travis Sawyer, 11 Mar 2004:
+ Fix ocotea board early init interrupt setup.
+
+* Patch by Thomas Viehweger, 11 Mar 2004:
+ Remove redundand code; add PCI-specific bits to include/mpc8260.h
+
+* Patch by Stephan Linz, 09 Mar 2004
+ - Add support for the SSV ADNP/ESC1 (Nios Softcore)
+
+* Patch by George G. Davis, 9 Mar 2004:
+ fix recent build failure for SA1100 target
+
+* Patch by Travis Sawyer, 09 Mar 2004:
+ Support native interrupt mode for the IBM440GX.
+ Previously it was running in 440GP compatibility mode.
+
+* Patch by Philippe Robin, 09 Mar 2004:
+ Added ARM Integrator AP, CP and Versatile PB926EJ-S Reference
+ Platform support.
+
+* Patch by Masami Komiya, 08 Mar 2004:
+ Don't overwrite server IP address or boot file name
+ when the boot server does not return values
+
+* Patch by Tolunay Orkun, 5 Mar 2004:
+ Removed compile time restriction on CFG_I2C_SPEED for DS1338 RTC
+
+* Patch by Tolunay Orkun, 5 Mar 2004:
+ Fix early board initialization for Cogent CSB272 board
+
+* Patch by Ed Okerson, 3 Mar 2004:
+ fix CFI flash writes for little endian systems
+
+* Patch by Reinhard Meyer, 01 Mar 2004:
+ generalize USB and IDE support for MPC5200 with according
+ changes to IceCube.h and TOP5200.h
+ add Am29LV256 256 MBit FLASH support for TOP5200 boards
+ add info about USB and IDE to README
+
+* Patch by Yuli Barcohen, 4 Mar 2004:
+ Fix problems with GCC 3.3.x which changed handling of global
+ variables explicitly initialized to zero (now in .bss instead of
+ .data as before).
+
+* Patch by Leon Kukovec, 02 Mar 2004:
+ add strswab() to fix IDE LBA capacity, firmware and model numbers
+ on little endian machines
+
+* Patch by Masami Komiya, 02 Mar 2004:
+ - Remove get_ticks() from NFS code
+ - Add verification of RPC transaction ID
+
+* Patch by Pierre Aubert, 02 Mar 2004:
+ cleanup for IDE and USB drivers for MPC5200
+
+* Patch by Travis Sawyer, 01 Mar 2004:
+ Ocotea:
+ - Add IBM PPC440GX Ref Platform support (Ocotea)
+ Original code by Paul Reynolds <PaulReynolds@lhsolutions.com>
+ Adapted to U-Boot and 440GX port
+ 440gx_enet.c:
+ - Add gracious handling of all Ethernet Pin Selections for 440GX
+ - Add RGMII selection for Cicada CIS8201 Gigabit PHY
+ ppc440.h:
+ - Add needed bit definitions
+ - Fix formatting
+
+* Patch by Carl Riechers, 1 Mar 2004:
+ Add PPC440GX prbdv0 divider to fix memory clock calculation.
+
+* Patch by Stephan Linz, 27 Feb 2004
+ - avoid problems for targets without NFS download support
+
+* Patch by Rune Torgersen, 27 Feb 2004:
+ - Added LBA48 support (CONFIG_LBA48 & CFG_64BIT_LBA)
+ - Added support for 64bit printing in vsprintf (CFG_64BIT_VSPRINTF)
+ - Added support for 64bit strtoul (CFG_64BIT_STRTOUL)
+
+* Patch by Masami Komiya, 27 Feb 2004:
+ Fix rarpboot: add autoload by NFS
+
+* Patch by Dan Eisenhut, 26 Feb 2004:
+ fix flash_write return value in saveenv
+
+* Patch by Stephan Linz, 11 Dec 2003
+ expand config.mk to avoid trigraph warnings on NIOS
+
+* Rename "BMS2003" board into "HMI10"
+
+* SX1 patches: use "serial#" for USB serial #; use redundand environment
+ storage; auto-set console on USB port (using preboot command)
+
+* Add support for SX1 mobile phone; add support for USB-based console
+ (enable with "setenv stdout usbtty; setenv stdin usbtty")
+
+* Fix LOWBOOT configuration for MPC5200 with DDR memory
+
+* Fix SDRAM timings for LITE5200 / IceCube board
+
+* Handle Auti-MDIX / connection status for INCA-IP
+
+* Fix USB problems when attempting to read 0 bytes
+
+* Patch by Travis Sawyer, 26 Feb 2004:
+ Fix broken compile for XPEDITE1K target.
+
+* Patch by Stephan Linz, 26 Feb 2004:
+ Bug fix for NFS code on NIOS targets
+
+* Patch by Stephen Williams, 26 Feb 2004:
+ Break up SystemACE reads of large block counts
+
+* Patch by Pierre Aubert, 26 Feb 2004
+ add IDE support for MPC5200
+
+* Patch by Masami Komiya, 26 Feb 2004:
+ add autoload via NFS
+
+* Patch by Stephen Williams
+ Use of CONFIG_SERIAL_SOFTWARE_FIFO in board.c consistent with uses
+ elsewhere in the source.
+
+* Patch by Steven Scholz, 25 Feb 2004:
+ - Timeouts in FPGA code should be based on CFG_HZ
+ - Minor cleanup in code for Altera FPGA ACEX1K
+
+* Patch by Steven Scholz, 25 Feb 2004:
+ Changed "Directory Hierarchy" section in README
+
+* Patch by Masami Komiya, 25 Feb 2004:
+ Reduce copy count in nfs_read_reply() of NFS code
+
+* Patch by Markus Pietrek, 24 Feb 2004:
+ NS9750 DevBoard added
+
+* Patch by Pierre Aubert, 24 Feb 2004
+ add USB support for MPC5200
+
+* Patch by Steven Scholz, 24 Feb 2004:
+ - fix MII commands to use values from last command
+
+* Patch by Torsten Demke, 24 Feb 2004:
+ Add support for the eXalion platform (SPSW-8240, F-30, F-300)
+
+* Patch by Rahul Shanbhag, 19 Feb 2004:
+ Fixes for for OMAP1610 board:
+ - shift some IRQ specific code to platform.S file
+ - remove duplicatewatchdog reset code from start.S
+
+* Make Auto-MDIX Support configurable on INCA-IP board
+
+* Fix license for mkimage tool
+
+* Patch by Masami Komiya, 24 Feb 2004:
+ Update NetBootFileXferSize in NFS code
+
+* Patch by Scott McNutt, 24 Feb 2004:
+ fix packet length in NFS code
+
+* Patch by Masami Komiy, 22 Feb 2004:
+ Add support for NFS for file download
+
+* Patch by Andrea Scian, 17 Feb 2004:
+ Add support for S3C44B0 processor and DAVE B2 board
+
+* Patch by Steven Scholz, 20 Feb 2004:
+ - Add support for MII commands on AT91RM9200 boards
+ - some cleanup in AT91RM9200 ethernet code
+
+* Patch by Peter Ryser, 20 Feb 2004:
+ Add support for the Xilinx ML300 platform
+
+* Patch by Stephan Linz, 17 Feb 2004:
+ Fix watchdog support for NIOS
+
+* Patch by Josh Fryman, 16 Feb 2004:
+ Fix byte-swapping for cfi_flash.c for different bus widths
+
+* Patch by Jon Diekema, 14 Jeb 2004:
+ Remove duplicate "FPGA Support" notes from the README file
+
+* Patches by Reinhard Meyer, 14 Feb 2004:
+ - update board/emk tree; use common flash driver
+ - Corrected tested bits in machine check exception in cpu/mpc5xxx/traps.c
+ [adapted for other PPC CPUs -- wd]
+ - Added support for the M48T08 on the EVAL5200 board in rtc/mk48t59.c
+
+* Patch by Jon Diekema, 13 Feb 2004:
+ Call show_boot_progress() whenever POST "FAILED" is printed.
+
+* Patch by Nishant Kamat, 13 Feb 2004:
+ Add support for TI OMAP1610 H2 Board
+ Fixes for cpu/arm926ejs/interrupt.c
+ (based on Richard Woodruff's patch for arm925, 16 Oct 03)
+ Fix for a timer bug in OMAP1610 Innovator
+ Add support for CS0 (ROM)/CS3 (Flash) boot in OMAP1610 Innovator and H2
+
+* Patches by Stephan Linz, 12 Feb 2004:
+ - add support for NIOS timer with variable period preload counter value
+ - prepare POST framework support for NIOS targets
+
+* Patch by Denis Peter, 11 Feb 2004:
+ add POST support for the MIP405 board
+
+* Patch by Laurent Mohin, 10 Feb 2004:
+ Fix buffer overflow in common/usb.c
+
+* Patch by Tolunay Orkun, 10 Feb 2004:
+ Add support for Cogent CSB272 board
+
+* Patch by Thomas Elste, 10 Feb 2004:
+ Add support for NET+50 CPU and ModNET50 board
+
+* Patch by Sam Song, 10 Feb 2004:
+ Fix typos in cfi_flash.c
+
+* Patch by Leon Kukovec, 10 Feb 2004
+ Fixed long dir entry slot id calculation in get_vfatname
+
+* Patch by Robin Gilks, 10 Feb 2004:
+ add "itest" command (operators: -eq, -ne, -lt, -gt, -le, -ge, ==,
+ !=, <>, <, >, <=, >=)
+
+* Fix problem with side effects in macros in include/usb.h
+
+* Patch by David Benson, 13 Nov 2003:
+ bug 841358 - fix TFTP download size limit
+
+* Fixing bug 850768:
+ improper flush_cache() in load_serial()
+
+* Fixing bug 834943:
+ MPC8540 - missing volatile declarations
+
+* Patch by Stephen Williams, 09 Feb 2004:
+ Add support for Xilinx SystemACE chip:
+ - New files common/cmd_ace.c and include/systemace.h
+ - Hook systemace support into cmd_fat and the partition manager
+
+* Patch by Travis Sawyer, 09 Feb 2004:
+ Add bi_opbfreq & bi_iic_fast to 440GX bd_info as needed for Linux
+
+* Patch by Travis Sawyer, 09 Feb 2004:
+ o 440GX:
+ - Fix PCI Indirect access for type 1 config cycles with ppc440.
+ - Add phymode for 440 enet
+ - fix pci pre init
+ o XPedite1K:
+ - Change board_pre_init to board_early_init_f
+ - Add user flash to bus controller setup
+ - Fix pci pre init
+ - Fix is_pci_host to check GPIO for monarch bit
+ - Force xpedite1k to pci conventional mode (via #define option)
+
+* Patch by Brad Kemp, 4 Feb 2004:
+ - handle the machine check that is generated during the PCI scans
+ on 82xx processors.
+ - define the registers used in the IMMR by the PCI subsystem.
+
+* Patch by Pierre Aubert, 03 Feb 2004:
+ cpu/mpc5xxx/start.S: copy MBAR into SPR311
+
+* Patch by Jeff Angielski, 03 Feb 2004:
+ Fix copy & paste error in cpu/mpc8260/pci.c
+
+* Patch by Reinhard Meyer, 24 Jan 2004:
+ Fix typo in cpu/mpc5xxx/pci_mpc5200.c
+
+* Add Auto-MDIX support for INCA-IP
+
+* Some code cleanup
+
+* Patch by Josef Baumgartner, 10 Feb 2004:
+ Fixes for ColdFire port
+
+* Patch by Brad Kemp, 11 Feb 2004:
+ Fix CFI flash driver problems
+
+* Make sure to use a bus clock divider of 2 only when running TQM8xxM
+ modules at CPU clock frequencies above 66 MHz.
+
+* Optimize flash programming speed for LWMON (by another 100% :-)
+
+* Patch by Jian Zhang, 3 Feb 2004:
+ - Changed the incorrect FAT12BUFSIZE
+ - data_begin in fsdata can be negative. Changed it to be short.
+
+* Patches by Stephan Linz, 30 Jan 2004:
+ 1: - board/altera/common/flash.c:flash_erase():
+ o allow interrupts befor get_timer() call
+ o check-up each erased sector and avoid unexpected timeouts
+ - board/altera/dk1c20/dk1s10.c:board_early_init_f():
+ o enclose sevenseg_set() in cpp condition
+ - remove the ASMI configuration for DK1S10_standard_32 (never present)
+ - fix some typed in mistakes in the NIOS documentation
+ 2: - split DK1C20 configuration into several header files:
+ o two new files for each NIOS CPU description
+ o U-Boot related part is remaining in DK1C20.h
+ 3: - split DK1S10 configuration into several header files:
+ o two new files for each NIOS CPU description
+ o U-Boot related part is remaining in DK1S10.h
+ 4: - Add support for the Microtronix Linux Development Kit
+ NIOS CPU configuration at the Altera Nios Development Kit,
+ Stratix Edition (DK-1S10)
+ 5: - Add documentation for the Altera Nios Development Kit,
+ Stratix Edition (DK-1S10)
+ 6: - Add support for the Nios Serial Peripharel Interface (SPI)
+ (master only)
+ 7: - Add support for the common U-Boot SPI framework at
+ RTC driver DS1306
+
+* Patch by Rahul Shanbhag, 28 Jan 2004:
+ Fix flash protection/locking handling for OMAP1610 innovator board.
+
+* Patch by Rolf Peukert, 28 Jan 2004:
+ fix flash write problems on CSB226 board (write with 32 bit bus width)
+
+* Patches by Mark Jonas, 16 Jan 2004:
+ - fix rounding error when calculating baudrates for MPC5200 PSCs
+ - make sure CFG_RAMBOOT and CFG_LOWBOOT are not enabled at the same
+ time which is not supported
+
+* Patch by Yuli Barcohen, 26 Jan 2004:
+ Allow bzip2 compression for small memory footprint boards
+
+* Patch by Brad Kemp, 21 Jan 2004:
+ Add support for CFI flash driver for both the Intel and the AMD
+ command sets.
+
+* Patch by Travis Sawyer, 20 Jan 2004:
+ Fix pci bridge auto enumeration of sibling p2p bridges.
+
+* Patch by Tolunay Orkun, 12 Jan 2004:
+ Add some delays as needed for Intel LXT971A PHY support
+
+* Patches by Stephan Linz, 09 Jan 2004:
+ - avoid warning: unused variable `piop' in board/altera/common/sevenseg.c
+ - make DK1C20 board configuration related to ASMI conform to
+ documentation
+
+* Patch by Anders Larsen, 09 Jan 2004:
+
+ ARM memory layout fixes: the abort-stack is now set up in the
+ correct RAM area, and the BSS is zeroed out as it should be.
+
+ Furthermore, the magic variables 'armboot_end' and 'armboot_end_data'
+ of the linker scripts are replaced by '__bss_start' and '_end',
+ resp., which is a further step to eliminate unnecessary differences
+ between the implementation of the CPU architectures.
+
+* Patch by liang a lei, 9 Jan 2004:
+ Fix Intel 28F128J3 ID in include/flash.h
+
+* Patch by Masami Komiya, 09 Jan 2004:
+ add support for TB0229 board (NEC VR4131 MIPS processor)
+
+* Patch by Leon Kukovec, 12 Dec 2003:
+ changed extern __inline__ into static __inline__ in
+ include/linux/byteorder/swab.h
+
+* Patch by Travis Sawyer, 30 Dec 2003:
+ Add support for IBM PPC440GX. Multiple EMAC Ethernet devices,
+ select MDI port based on enabled EMAC device.
+ Add support for XES Inc <http://www.xes-inc.com> XPedite1000 440GX
+ base PrPMC board.
+
+* Patch by Wolter Kamphuis, 15 Dec 2003:
+ made CONFIG_SILENT_CONSOLE usable on all architectures
+
+* Disable date command on TQM866M - there is no RTC on MPC866
+
+* Fix variable CPU clock for MPC859/866 systems for low CPU clocks
+
+* Implement adaptive SDRAM timing configuration based on actual CPU
+ clock frequency for INCA-IP; fix problem with board hanging when
+ switching from 150MHz to 100MHz
+
+* Add PCMCIA CS support for BMS2003 board
+
+* Add variable CPU clock for MPC859/866 systems (so far only TQM866M):
+ see doc/README.MPC866 for details;
+ implement workaround for "SIU4" and "SIU9" silicon bugs on MPC866;
+ calculate CPU clock frequency from PLL register values.
+
+* Add support for 128 MB RAM on TQM8xxL/M modules
+
+* Fix PS/2 keyboard problem caused by statically initialized variable
+ pointing to a location in flash
+
+* Fix INCA-IP clock calculation: 400/3 = 133.3 MHz, not 130.
+
+* The PS/2 mux on the BMS2003 board needs 450 ms after power on
+ before we can access it; add delay in case we are faster (with no
+ CF card inserted)
+
+* Cleanup of some init functions
+
+* Make sure SCC Ethernet is always stopped by the time we boot Linux
+ to avoid Linux crashes by early packets coming in.
+
+* Accelerate flash accesses on LWMON board by using buffered writes
+
+* Fix typo in Makefile;
+ fix problem with PARTNUM detection
+
+* Patch by Reinhard Meyer, 09 Jan 2004:
+ - add RTC support for MPC5200 based boards (requires RTC_XTAL)
+
+* Add support for IDE LED on BMS2003 board
+ (exclusive with status LED!)
+
+* Add support for PS/2 keyboard (used with PS/2 multiplexor on
+ BMS2003 board)
+
+* Patches by Reinhard Meyer, 4 Jan 2004 + 7 Jan 2004:
+ Add common files for "emk" boards
+
+* Add a common get_ram_size() function and modify the the
+ board-specific files to invoke that common implementation.
+
+======================================================================
+Changes for U-Boot 1.0.1:
+======================================================================
+
+* Set default clock for INCA-IP to 150 MHz
+
+* Make BMS2003 use a separate config file to avoid #ifdef mess;
+ add I2C support; add support for DS1337 RTC
+
+* Add CompactFlash support for BMS2003 board
+
+* Add support for status LED on BMS2003 board
+
+* Patch by Scott McNutt, 02 Jan 2004:
+ Add support for the Nios Active Serial Memory Interface (ASMI)
+ on Cyclone devices
+
+* Patch by Andrea Marson, 16 Dec 2003:
+ Add support for the PPChameleon ME and HI modules
+
+* Patch by Yuli Barcohen, 22 Dec 2003:
+ Add support for Motorola DUET ADS board (MPC87x/88x)
+
+* Patch by Robert Schwebel, 15 Dec 2003:
+ add support for cramfs (uses JFFS2 command interface)
+
+* Patches by Stephan Linz, 11 Dec 2003:
+ - more documentation for NIOS port
+ - new struct nios_pio_t, struct nios_spi_t
+ - Reconfiguration for NIOS Development Kit DK1C20:
+ o move board related code from board/dk1c20
+ to board/altera/dk1c20
+ o create a new common source path board/altera/common
+ and move generic flash access stuff into it
+ o change/expand configuration file DK1C20.h
+ - Add support for NIOS Development Kit DK1S10
+ - Add status LED support for NIOS systems
+ - Add dual 7-segment LED support for Altera NIOS DevKits
+
+* Patch by Ronen Shitrit, 10 Dec 2003:
+ Add support for the Marvell DB64360 / DB64460 development boards
+
+* Patch by Detlev Zundel, 10 Dec 2003:
+ fix dependency problem in examples/Makefile
+
+* Patch by Denis Peter, 8 Dec 2003
+ - add support for the PATI board (MPC555)
+ - add SPI support for the MPC5xx
+
+* Patch by Anders Larsen, 08 Dec 2003:
+ add configuration options CONFIG_SERIAL_TAG and CONFIG_REVISION_TAG
+ to pass ATAG_SERIAL and ATAG_REVISION, resp., to the ARM target;
+ cleanup some redundand #defines
+
+* Patch by André Schwarz, 8 Dec 2003:
+ fixes for Davicom DM9102A Ethernet Chip (#define CONFIG_TULIP_FIX_DAVICOM):
+ - TX and RX deskriptors must be quad-word aligned
+ - does not work with only one TX deskriptor
+ - standard reset method does not work
+
+* Patch by Masami Komiya, 08 Dec 2003:
+ add RTL8139 ethernet driver
+
+* Patches by Ed Okerson, 07 Dec 2003:
+ - fix ethernet for the AU1x00 processors in little-endian mode.
+ - extend memsetup.S for the AU1x00 processors in BE and LE modes
+
+* Minor code cleanup (coding style)
+
+* Patch by Reinhard Meyer, 30 Dec 2003:
+ - cpu/mpc5xxx/fec.c: added CONFIG_PHY_ADDR, added CONFIG_PHY_TYPE,
+ - added CONFIG_PHY_ADDR to include/configs/IceCube.h,
+ - turned debug print of PHY registers into a function (called in two places)
+ - added support for EMK MPC5200 based modules
+
+* Fix MPC8xx PLPRCR_MFD_SHIFT typo
+
+* Add support for TQM866M modules
+
+* Fixes for TQM855M with 4 MB flash (Am29DL163 = _no_ mirror bit flash)
+
+* Fix a few compiler warnings
+
+* Patch by Reinhard Meyer, 28 Dec 2003:
+ Add initial support for TOP5200 board
+
+* Make CPU clock on ICA-IP board controllable by a "cpuclk"
+ environment variable which can set to "100", "133", or "150". The
+ CPU clock will be configured accordingly upon next reboot. Other
+ values are ignored. In case of an invalid or undefined "cpuclk"
+ value, the compile-time default CPU clock speed will be used.
+
+* Enable Quad-UART on BMS2003 board (initialize the PCMCIA memory
+ window that is used to access the UART registers by the Linux driver)
+
+* Patch by Reinhard Meyer, 20 Dec 2003:
+ Fix clock calculation for the MPC5200 for higher clock frequencies
+ (above 2**32 / 10 = 429.5 MHz).
+
+* Fix CONFIG_PLL_PCI_TO_MEM_MULTIPLIER divider error in SP8240 configuration
+
+* Fix IceCube CLKIN configuration (it's 33.000000MHz)
+
+* Add new configuration for IceCube board with DDR memory
+
+* Update TRAB memory configurations
+
+* Add JFFS2 support for INCA-IP board
+
+* Patch by Bill Hargen, 09 Dec 2003:
+ - BUBINGA405EP: changed flash driver to protect top sector containing
+ first instruction.
+ - BUBINGA405EP: configured "eeprom" command to access boot config EEPROM.
+ - BUBINGA405EP: fixed PLL init (init chip selects before FPGA/NVRAM access).
+ - 405EP: fixed SPD-based SDRAM init (only use banks 0 and 1).
+ - 405EP: added/fixed support for "reginfo" command.
+ - 4xx: removed spurious MII error messages on "mii info" command.
+
+* Patch by Bernhard Kuhn, 28 Nov 2003:
+ add support for ColdFire CPU
+ add support for Motorola M5272C3 and M5282EVB boards
+
+* Patch by Pierre Aubert, 24 Nov 2003:
+ - add a return value for the fpga command
+ - add ide_preinit() function called in ide_init if CONFIG_IDE_PREINIT
+ is defined. If ide_preinit fails, ide_init is aborted.
+ - fix an endianess problem in fat.h
+
+* Patch by Wolter Kamphuis, 05 Dec 2003:
+ Add support for SNMC's QS850/QS823/QS860T boards
+
+* Patch by Yuli Barcohen, 3 Dec 2003:
+ "revive" U-Boot support for old Motorola MPC860ADS board
+
+* Patch by Cam(ilo?), 03 Dec 2003:
+ make examples build even with broken Montavista objcopy
+
+* Patch by Pavel Bartusek, 27 Nov 2003:
+ fix conversion problem with "bootretry" evironment variable
+
+* Patch by Andre Schwarz, 24 Nov 2003:
+ add support for mvblue (mvBlueLYNX and mvBlueBOX) boards
+
+* Patch by Pavel Bartusek, 21 Nov 2003:
+ set ZMII bridge speed on 440
+
+* Patch by Anders Larsen, 17 Nov 2003:
+ Fix mismatched #ifdef / #endif in include/asm-arm/arch-pxa/hardware.h
+
+* Patches by David Müller, 14 Nov 2003:
+ - board/mpl/common/common_util.c
+ * implement support for BZIP2 compressed images
+ * various cleanups (printf -> puts, ...)
+ - board/mpl/common/flash.c
+ * report correct errors to upper layers
+ * check the erase fail and VPP low bits in status reg
+ - board/mpl/vcma9/cmd_vcma9.c
+ - board/mpl/vcma9/flash.c
+ * various cleanups (printf -> puts, ...)
+ - common/cmd_usb.c
+ * fix typo in comment
+ - cpu/arm920t/usb_ohci.c
+ * support for S3C2410 is missing in #if line
+ - drivers/cs8900.c
+ * reinit some registers in case of error (cable missing, ...)
+ - fs/fat/fat.c
+ * support for USB/MMC devices is missing in #if line
+ - include/configs/MIP405.h
+ - include/configs/PIP405.h
+ * enable BZIP2 support
+ * enlarge malloc space to 1MiB because of BZIP2 support
+ - include/configs/VCMA9.h
+ * enable BZIP2 support
+ * enlarge malloc space to 1MiB because of BZIP2 support
+ * enable USB support
+ - lib_arm/armlinux.c
+ * change calling convention of ARM Linux kernel as
+ described on http://www.arm.linux.org.uk/developer/booting.php
+
+* Patch by Thomas Lange, 14 Nov 2003:
+ Split dbau1x00 into dbau1000, dbau1100 and dbau1500 configs to
+ support all these AMD boards.
+
+* Patch by Thomas Lange, 14 Nov 2003:
+ Workaround for mips au1x00 physical memory accesses (the au1x00
+ uses a 36 bit bus internally and cannot access physical memory
+ directly. Use the uncached SDRAM address instead of the physical
+ one.)
+
+* Patch by Xue Ligong (Joe), 13 Nov 2003:
+ add Realtek 8019 ethernet driver
+
+* Patch by Yuli Barcohen, 13 Nov 2003:
+ MPC826xADS/PQ2FADS cleanup
+
+* Patch by Anders Larsen, 12 Nov 2003:
+ Update README to mark the PORTIO commands non-standard
+
+* Patch by Nicolas Lacressonnière, 12 Nov 2003:
+ update for for Atmel AT91RM9200DK development kit:
+ - support for environment variables in DataFlash
+ - Atmel DataFlash AT45DB1282 support
+
+* Patch by Jeff Carr, 11 Nov 2003:
+ add support for new version of 8270 processors
+
+* Patches by George G. Davis, 05 Nov 2003:
+ - only pass the ARM linux initrd tag to the kernel when an initrd
+ is actually present
+ - update omap1510inn configuration file
+
+* Patches by Stephan Linz, 3 Nov 2003:
+ - more endianess fixes for LAN91C111 driver
+ - CFG_HZ configuration patch for NIOS Cyclone board
+
+* Patch by Stephan Linz, 28 Oct 2003:
+ fix PHY_INT_REG vs. PHY_MASK_REG bug in drivers/smc91111.c
+
+* Patch by Steven Scholz, 20 Oct 2003:
+ - make "mii info <addr>" show infor for PHY at "addr" only
+ - Endian fix for miiphy_info()
+
+* Patch by Gleb Natapov, 19 Sep 2003:
+ Move most of the timer interrupt related PPC code to ppc_lib/interrupts.c
+
+* Patch by Anders Larsen, 17 Sep 2003:
+ Bring ARM memory layout in sync with the documentation:
+ stack and malloc-heap are now located _below_ the U-Boot code
+
+* Accelerate booting on TRAB board: read and check autoupdate image
+ headers first instead of always reading the whole images.
+
+* Fix type in MPC5XXX code (pointed out by Victor Wren)
+
+* Enabled password check on RMU board
+
+* Fix configuration problem with IceCube in LOWBOOT configuration:
+ envrionment got embedded, corrupting the image layout.
+
+* Fix NEC display names (it's 6440 [for 640x480], not 6640).
+
+* Added BMS2003 board
+ add support for NEC NL6448BC33-54. 10.4", 640x480 TFT display
+
+* Fix flash driver for TRAB board (must use Unlock Bypass Reset
+ command to exit Unlock Bypass Mode); adjust timings for flash, SRAM
+ and CPLD
+
+* Use "-fPIC" instead of "-mrelocatable" to prevent problems with
+ recent tools
+
+* Add checksum verification to 'imls' command
+
+* Add bd_info fields needed for 4xx Linux I2C driver
+
+* Patch by Martin Krause, 4 Nov. 2003:
+ Fix error in cmd_vfd.c (TRAB board: "vfd /1" shows now only one Bitmap)
+
+* Print used network interface when CONFIG_NET_MULTI is set
+
+* Patch by Bernhard Kuhn, 28 Oct 2003:
+ Add low boot support for MPC5200
+
+* Fix problem with dual PCMCIA support (NSCU)
+
+* Fix MPC5200 I2C initialization function
+
+======================================================================
+Changes for U-Boot 1.0.0:
+======================================================================
+
+* Fix parameter passing to standalone images with bootm command
+
+* Patch by Kyle Harris, 30 Oct 2003:
+ Fix build errors for ixdp425 board
+
+* Patch by David M. Horn, 29 Oct 2003:
+ Fixes to build under CYGWIN
+
+* Get IceCube MGT5100 working (again)
+
+* Fix problems in memory test on some boards (which was not
+ non-destructive as intended)
+
+* Patch by Gary Jennejohn, 28 Oct 2003:
+ Change fs/fat/fat.c to put I/O buffers in BSS instead on the stack
+ to prevent stack overflow on ARM systems
+
+* Patch by Stephan Linz, 28 Oct 2003:
+ fix init sequence error for NIOS port
+
+* Allow lowercase spelling for IceCube_5200; support MPC5200LITE name
+
+* Add CONFIG_VERSION_VARIABLE to TRAB configuration
+
+* Patch by Xiao Xianghua, 23 Oct 2003:
+ small patch for mpc85xx
+
+* Fix small problem in MPC5200 I2C driver
+
+* Fix FCC3 support on ATC board
+
+* Correct header printing for multi-image files in do_bootm()
+
+* Make CONFIG_SILENT_CONSOLE work with CONFIG_AUTOBOOT_KEYED
+
+* Fix PCI problems on PPChameleon board
+
+* Patch by Steven Scholz, 18 Oct 2003:
+ Fix AT91RM9200 ethernet driver
- Add monitor functions for indirect access to PPC440 DCR's
- Patch by Leonid Baryudin, 12 Oct 2006
+* Patch by Nye Liu, 17 Oct 2003:
+ Fix typo in include/mpc8xx.h
-commit 5f3249a0a168e446a4cc9669b2bce0bc456f0a09
-Author: Jon Loeliger <jdl@freescale.com>
-Date: Fri Oct 13 16:47:53 2006 -0500
+* Patch by Richard Woodruff, 16 Oct 03:
+ Fixes for cpu/arm925/interrupt.c
+ - Initialize timestamp & lastdec vars.
+ - fix timestamp overflows.
+ - fix lastdec overflow.
+ - smarter normalization to allow udelay() below 1ms to work.
- Fixed leading whitespace issues.
- Removed spurious LAWAR thing.
+* Patch by Scott McNutt, 16 Oct
+ add networking support for the Altera Nios Development Kit,
+ Cyclone Edition (DK-1C20)
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
+* Patch by Jon Diekema, 14 Oct 2003:
+ add hint about doc/README.silent to README file
-commit 0ee90cb77e01d6e8ccd37e1bd96678597875c391
-Author: Jon Loeliger <jdl@freescale.com>
-Date: Thu Oct 12 10:42:36 2006 -0500
+* Add CompactFlash support for NSCU
- Remove unneeded include files and local variable.
+* Fix PCI problems on PPChameleonEVB
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
+* TRAB auto-update: Base decision if we have to strip the image
+ header on image type as encoded in the header
+ (include image type patch by Martin Krause, 17 Oct 2003)
-commit 1eaf3a5ff4960a46f3a9063568ba2af7883f07c5
-Author: Grant Likely <grant.likely@secretlab.ca>
-Date: Tue Oct 10 00:23:32 2006 -0600
+* Patches by Xianghua Xiao, 15 Oct 2003:
- Fix possible uninitialized variable compiler warning.
+ - Added Motorola CPU 8540/8560 support (cpu/85xx)
+ - Added Motorola MPC8540ADS board support (board/mpc8540ads)
+ - Added Motorola MPC8560ADS board support (board/mpc8560ads)
- When CONFIG_OF_FLAG_TREE is set, the compiler complains that 'len' in
- do_bootm_linux() may be uninitialized. There is no possibility in the
- current code that len will get used uninitialized, but this fix follows
- the existing convention of setting both len and data to zero at the same
- time.
+* Fix flash timings on TRAB board
- Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
+* Make sure HUSH is initialized for running auto-update scripts
-commit 7376eb87aaa601f728f9b8e5e9cd2711a67f529e
-Author: Matthew McClintock <msm@freescale.com>
-Date: Wed Oct 11 15:13:01 2006 -0500
+* Make 5200 reset command _really_ reset the board, without running
+ any other code after it
- * Fix a bunch of compiler warnings for gcc 4.0
+* Fix errors with flash erase when range spans across banks
+ that are mapped in reverse order
- Signed-off-by: Matthew McClintock <msm@freescale.com>
+* Fix flash mapping and display on P3G4 board
-commit bf651baa365e5447246aad6a633ccd667cf24a39
-Author: Jon Loeliger <jdl@freescale.com>
-Date: Wed Oct 11 10:10:43 2006 -0500
+* Patch by Kyle Harris, 15 Jul 2003:
+ - add support for Intel IXP425 CPU
+ - add support for IXDP425 eval board
- Move "ar" flags to config.mk to allow for silent "make -s"
+* Added config option CONFIG_SILENT_CONSOLE. See doc/README.silent
+ for more information
-commit 1fd5699a4a24f5c1dab1b32f480bace1ebb9fc3e
-Author: Jon Loeliger <jdl@freescale.com>
-Date: Tue Oct 10 17:19:03 2006 -0500
+* Patch by Steven Scholz, 10 Oct 2003
+ - Add support for Altera FPGA ACEX1K
- Coding style changes to remove local varible blocks
- and reformat a bit nicer.
+* Patches by Thomas Lange, 09 Oct 2003:
+ - fix cmd_ide.c for non ppc boards (read/write functions did not
+ add ATA base address)
+ - fix for shannon board
+ - #ifdef CONFIG_IDE_8xx_DIRECT some otherwise unused code
+ - Endian swap ATA identity for all big endian CPUs, not just PPC
+ - MIPS only: New option CONFIG_MEMSIZE_IN_BYTES for passing memsize
+ args to linux
+ - add support for dbau1x00 board (MIPS32)
-commit 8b283dbb3a08d1b8d406bc15f119e081b3e2606a
-Author: Jon Loeliger <jdl@freescale.com>
-Date: Tue Oct 10 17:16:04 2006 -0500
+* Patch by Sangmoon Kim, 07 Oct 2003:
+ add support for debris board
- Fix whitespace issues.
+* Patch by Martin Krause, 09 Oct 2003:
+ Fixes for TRAB board
+ - /board/trab/rs485.c: correct baudrate
+ - /board/trab/cmd_trab.c: bug fix for problem with timer overflow in
+ udelay(); fix some timing problems with adc controller
+ - /board/trab/trab_fkt.c: add new commands: gain, eeprom and power;
+ modify commands: touch and buzzer
-commit 7b382b7125f2397cce63253df62f183e3dfa2770
-Author: Jon Loeliger <jdl@freescale.com>
-Date: Tue Oct 10 17:14:45 2006 -0500
+* Disable CONFIG_SUPPORT_VFAT when used with CONFIG_AUTO_UPDATE
+ (quick & dirty workaround for rogue pointer problem in get_vfatname());
+ Use direct function calls for auto_update instead of hush commands
- Fix whitespace issues.
+* Patch by Scott McNutt, 04 Oct 2003:
+ - add support for Altera Nios-32 CPU
+ - add support for Nios Cyclone Development Kit (DK-1C20)
-commit e10390ddd736b0dad1528eec4b0fe35c0827139a
-Author: Jon Loeliger <jdl@freescale.com>
-Date: Tue Oct 10 17:06:53 2006 -0500
+* Patch by Steven Scholz, 29 Sep 2003:
+ - A second parameter for bootm overwrites the load address for
+ "Standalone Application" images.
+ - bootm sets environment variable "filesize" to the resulting
+ (uncompressed) data length for "Standalone Application" images
+ when autostart is set to "no". Now you can do something like
+ if bootm $fpgadata $some_free_ram ; then
+ fpga load 0 $some_free_ram $filesize
+ fi
- Fix whitespace issues.
+* Patch by Denis Peter, 25 Sept 2003:
+ add support for the MIP405 Rev. C board
-commit 89875e96ba3f023157bf50d5f8e33bf254964a76
-Author: Jon Loeliger <jdl@freescale.com>
-Date: Tue Oct 10 17:03:43 2006 -0500
+* Patch by Yuli Barcohen, 25 Sep 2003:
+ add support for Zephyr Engineering ZPC.1900 board
- Ran lindent and cleaned up whitespace issues.
- Format for 80-columns too.
+* Patch by Anders Larsen, 23 Sep 2003:
+ add CMD_PORTIO to CFG_CMD_NONSTD (commands in question are only
+ implemented for the x86 architecture)
-commit 333961ae7095fc66d8a041fce1ac9ee873b09d86
-Author: Jon Loeliger <jdl@freescale.com>
-Date: Tue Oct 10 17:02:22 2006 -0500
+* Patch by Sangmoon Kim, 23 Sep 2003:
+ fix pll_pci_to_mem_multiplier table for MPC8245
- Fix whitespace and 80-col issues.
+* Patch by Anders Larsen, 22 Sep 2003:
+ enable timed autoboot on PXA
-commit f55df18187e7a45cb73fec4370d12135e6691ae1
-Author: John Traill <john.traill@freescale.com>
-Date: Fri Sep 29 08:23:12 2006 +0100
+* Patch by David Müller, 22 Sep 2003:
+ - add $(CFLAGS) to "-print-libgcc-filename" so compiler driver
+ returns correct libgcc file path
+ - "latency" reduction of busy-loop waiting to improve "U-Boot" boot
+ time on s3c24x0 systems
- Fix missing tCycle/modfreq calculation.
+* Patch by Jon Diekema, 19 Sep 2003:
+ - Add CFG_FAULT_ECHO_LINK_DOWN option to echo the inverted Ethernet
+ link state to the fault LED.
+ - In NetLoop, make the Fault LED reflect the link status. The link
+ status gets updated on entry, and on timeouts.
- Signed-off-by: John Traill <john.traill@freescale.com>
+* Patch by Anders Larsen, 18 Sep 2003:
+ allow mkimage to build and run on Cygwin-hosted systems
-commit 8272dc2f58f2473d8995fcc9b916440cfba080f0
-Author: Andy Fleming <afleming@freescale.com>
-Date: Wed Sep 13 10:33:35 2006 -0500
+* Patch by Frank Müller, 18 Sep 2003:
+ use bi_intfreq instead of bi_busfreq to compute fec_mii_speed in
+ cpu/mpc8xx/fec.c
- Updated config headers to add default FDT-based booting
+* Patch by Pantelis Antoniou, 16 Sep 2003:
+ add tool to compute fileds in the PLPRCR register for MPC86x
-commit 09f3e09e9ebcfa7919ca8931a4b5504fadd1f1d3
-Author: Andy Fleming <afleming@freescale.com>
-Date: Wed Sep 13 10:34:18 2006 -0500
+* Use IH_TYPE_FILESYSTEM for TRAB "disk" images.
- Add support for eTSEC 3 & 4 on 8548 CDS
+* Fix build problems under FreeBSD
- * Added support for using eTSEC 3 and eTSEC 4 on the 8548 CDS.
- This will only work on rev 1.3 boards (but doesn't break older boards)
- * Cleaned up some comments to reflect the expanded role of tsec
- in other systems
+* Add generic filesystem image type
-commit 084d648b109c8984f83674043c1a7fa3885ef801
-Author: Andy Fleming <afleming@freescale.com>
-Date: Wed Sep 13 10:33:56 2006 -0500
+* Make fatload set filesize environment variable
- Added code to support 2.6.18 PCI changes in u-boot
+* enable basic / medium / high-end configurations for PPChameleonEVB
+ board; fix NAND code
- * Added code to swizzle the IRQ map for the PCI
+* enable TFTP client code to specify to the server the desired
+ timeout value (see RFC-2349)
-commit afbdc649f8751e4f4f1a6f527edfe139773f2c15
-Author: Jon Loeliger <jdl@freescale.com>
-Date: Tue Sep 19 09:34:10 2006 -0500
+* Improve SDRAM setup for TRAB board
- Modified makefile for new build mechanism.
+* Suppress all output with splashscreen configured only if "splashimage"
+ is set
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
+* Fix problems with I2C support for mpc5200
-commit d14ba6a798beb753e7a864500414fcc2d198b8bc
-Author: Jon Loeliger <jdl@freescale.com>
-Date: Thu Sep 14 08:40:36 2006 -0500
+* Adapt TRAB configuration and auto_update to new memory layout
- Handle 86xx SVR values according to the new Reference Manual.
- Both 8641 and 8641D have SVR == 0x8090, and are distinguished
- by the byte in bits 16-23 instead.
- Thanks to Jason Jin for noticing.
+* Add configuration for wtk board
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
+* Add support for the Sharp LQ065T9DR51U LCD display
-commit 88c8f4921fc47fb0eb2384b16586f1bd7f275be7
-Author: Zhang Wei <wei.zhang@freescale.com>
-Date: Mon Aug 28 14:25:31 2006 +0800
+* Patch by Rune Torgersen, 17 Sep 2003:
+ - Fixes for MPC8266 default config
+ - Allow eth_loopback_test() on 8260 to use a subset of the FCC's
- Fixed an OF-tree off-by-one bug when adding a new property name.
- This bug will cause the kernel booting to pause a long time.
+* Patches by Jon Diekema, 17 Sep 2003:
+ - update README (SHOW_BOOT_PROGRESS values for cmd_nand.c and
+ env_common.c)
+ - sbc8260 tweaks
+ - adjust "help" output
- Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
- (cherry picked from 2f15776ccc6dc32377d8ba9652b8f58059c27c6d commit)
+* Patches by Anders Larsen, 17 Sep 2003:
+ - fix spelling errors
+ - set GD_FLG_DEVINIT flag only after device function pointers
+ are valid
+ - Allow CFG_ALT_MEMTEST on systems where address zero isn't
+ writeable
+ - enable 3.rd UART (ST-UART) on PXA(XScale) CPUs
+ - trigger watchdog while waiting in serial driver
-commit 9bff7a69a885adebbd2bd45990494ec4cf998a30
-Author: Jon Loeliger <jdl@freescale.com>
-Date: Tue Aug 29 11:05:09 2006 -0500
+* Add auto-update code for TRAB board using USB memory sticks,
+ support new configuration with more memory
- Remove trailing empty lines.
+* disable MPC5200 bus pipelining as workaround for bus contention
-commit cd6d73d5b895a5935ac4fde0a356288142a584e0
-Author: Jon Loeliger <jdl@freescale.com>
-Date: Tue Aug 29 09:48:49 2006 -0500
+* Modify XLB arbiter priorities on MPC5200 so all devices use same
+ priority; configure critical interrupts to be handled like external
+ interrupts
- Remove bogus msync and use volatile asm.
+* Make IPB clock on MGT5100/MPC5200 configurable in board config file;
+ go back to 66 MHz for stability
-commit 778d45049ce5927b65b3ff1d8e6692b654bdd49e
-Author: Jon Loeliger <jdl@freescale.com>
-Date: Tue Aug 29 08:17:14 2006 -0500
+* Patches by Jon Diekema, 15 Sep 2003:
+ - add description for missing CFG_CMD_* entries in the README file
+ - sacsng tweaks
- Add myself as maintainer for MPC8641HPCN.
+* Patch by Gleb Natapov, 14 Sep 2003:
+ enable watchdog support for all MPC824x boards that have a watchdog
-commit 2f15776ccc6dc32377d8ba9652b8f58059c27c6d
-Author: Zhang Wei <wei.zhang@freescale.com>
-Date: Mon Aug 28 14:25:31 2006 +0800
+* On MPC5200, restrict FEC to a maximum of 10 Mbps to work around the
+ "Non-octet Aligned Frame" errors we see at 100 Mbps
- Fixed an OF-tree off-by-one bug when adding a new property name.
- This bug will cause the kernel booting to pause a long time.
+* Patch by Sharad Gupta, 14 Sep 2003:
+ fix SPR numbers for upper BAT register ([ID]BAT[4-7][UL])
- Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
+* Patch by llandre, 11 Sep 2003:
+ update configuration for PPChameleonEVB board
-commit 5567806b67d0ae83493aa8823ad3b6c914f581d7
-Author: Haiying Wang <haiying.wang@freescale.com>
-Date: Fri Aug 25 14:38:34 2006 -0400
+* Patch by David Müller, 13 Sep 2003:
+ various changes to VCMA9 board specific files
- Change ramdiskaddr and dtbaddr
- Remove PEX fluff commands.
+* Add I2C support for MGT5100 / MPC5200
- Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
+* Patch by Rune Torgersen, 11 Sep 2003:
+ Changed default memory option on MPC8266ADS to NOT be Page Based
+ Interleave, since this doesn't work very well with the standard
+ 16MB DIMM
-commit b2b78421d9db49c21a821af8a19c21c1f7dfb29e
-Author: Matthew McClintock <msm@freescale.com>
-Date: Wed Aug 23 13:32:45 2006 -0500
+* Patch by George G. Davis, 12 Sep 2003:
+ fix Makefile settings for sk98 driver
- * Another small fix for booting with disable_of
+* Patch by Stefan Roese, 12 Sep 2003:
+ - new boards added: DP405, HUB405, PLU405, VOH405
+ - some esd boards updated
+ - cpu/ppc4xx/sdram.c: disable memory controller before setting
+ first values
+ - cpu/ppc4xx/405_pci.c: set vendor id on PPC405EP systems
- Signed-off-by: Matthew McClintock <msm@freescale.com>
+* Patch by Martin Krause, 11 Sep 2003:
+ add burn-in tests for TRAB board
-commit 4a7cc0f21918e6ecf07ed57075d67df2c4a1299c
-Author: Jon Loeliger <jdl@freescale.com>
-Date: Wed Aug 23 11:04:43 2006 -0500
+* Enable instruction cache on MPC5200 board
- Cleanup and lindent new AHCI driver.
+* Patch by Denis Peter, 11 Sep 2003:
+ - fix USB data pointer assignment for bulk only transfer.
+ - prevent to display erased directories in FAT filesystem.
-commit dabf9ef8c10b4dead5ef2106ef742b1c06b542de
-Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
-Date: Wed Aug 23 19:15:12 2006 +0800
+* Change output format for NAND flash - make it look like for other
+ memory, too
- Add AHCI define and sata support for MPC8641HPCN board.
+======================================================================
+Changes for U-Boot 0.4.8:
+======================================================================
- Signed-off-by:Jason Jin<jason.jin@freescale.com>
+* Add I2C and RTC support for RMU board
-commit 4782ac80b02f0d01afd309e2200dd3c7037f2ba4
-Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
-Date: Wed Aug 23 19:10:44 2006 +0800
+* Patches by Denis Peter, 9 Sep 2003:
+ add FAT support for IDE, SCSI and USB
- Add AHCI support to u-boot
+* Patches by Gleb Natapov, 2 Sep 2003:
+ - cleanup of POST code for unsupported architectures
+ - MPC824x locks way0 of data cache for use as initial RAM;
+ this patch unlocks it after relocation to RAM and invalidates
+ the locked entries.
- Add AHCI support in u-boot, enable the sata disk controllers which
- following the AHCI protocol.
+* Patch by Gleb Natapov, 30 Aug 2003:
+ new I2C driver for mpc107 bridge. Now works from flash.
- Signed-off-by:Jason Jin<jason.jin@freescale.com>
+* Patch by Dave Ellis, 11 Aug 2003:
+ - JFFS2: fix typo in common/cmd_jffs2.c
+ - JFFS2: fix CFG_JFFS2_SORT_FRAGMENTS option
+ - JFFS2: remove node version 0 warning
+ - JFFS2: accept JFFS2 PADDING nodes
+ - SXNI855T: add AM29LV800 support
+ - SXNI855T: move environment from EEPROM to flash
+ - SXNI855T: boot from JFFS2 in NOR or NAND flash
-commit d8ea2acf5f137cae99417df4f573d036ee384668
-Author: Zhang Wei <wei.zhang@freescale.com>
-Date: Wed Aug 23 17:54:32 2006 +0800
+* Patch by Bill Hargen, 11 Aug 2003:
+ fixes for I2C on MPC8240
+ - fix i2c_write routine
+ - fix iprobe command
+ - eliminates use of global variables, plus dead code, cleanup.
- Add dtb boot-up parameter to default boot commands.
+* Add support for USB Mass Storage Devices (BBB)
+ (tested with USB memory sticks only)
- Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
+* Avoid flicker on TRAB's VFD
-commit b93775c2036b99baa390ea425c4771895bbc63c4
-Author: Jon Loeliger <jdl@freescale.com>
-Date: Tue Aug 22 18:26:08 2006 -0500
+* Add support for SK98xx driver
- Cleanup even more poorly introduced whitespace.
+* Add PCI support for SL8245 board
-commit ae6241685cbcf0c79a3636530d2ceab1fb291a94
-Author: Jon Loeliger <jdl@freescale.com>
-Date: Tue Aug 22 18:07:00 2006 -0500
+* Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB)
+ or 1 x AM29LV652 (two LV065 in one chip = 16 MB);
+ Run IPB at 133 Mhz; adjust the MII clock frequency accordingly
- Cleanup more poorly introduced whitespace.
+* Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16 MHz)
+ to allow for more accurate baudrate settings
+ (error now 0.7% at 115 kbps, instead of 3.5% before)
-commit 2c33e8a1c535b3ae91cf0b284480600bf3f57c57
-Author: Jon Loeliger <jdl@freescale.com>
-Date: Tue Aug 22 17:54:05 2006 -0500
+* Patch by Andreas Mohr, 4 Sep 2003:
+ Fix a lot of spelling errors
- Cleanup poorly introduced whitespace.
+* Add support for PPChameleon Eval Board
-commit 80e955c7dd98f4b4fd23c2113caf75ed2b77b5b3
-Author: Jon Loeliger <jdl@freescale.com>
-Date: Tue Aug 22 12:25:27 2006 -0500
+* Add support for P3G4 board
- General indent and whitespace cleanups.
+* Fix problem with MGT5100 FEC driver: add "early" MAC address
+ initialization
-commit ffff3ae56f5842ca3679e4ce7922b819a87aad9f
-Author: Jon Loeliger <jdl@freescale.com>
-Date: Tue Aug 22 12:06:18 2006 -0500
+* Patch by Yuli Barcohen, 7 Aug 2003:
+ check BCSR to detect if the board is configured in PCI mode
- General indent and whitespace cleanups.
+======================================================================
+Changes for U-Boot 0.4.7:
+======================================================================
-commit 41a0e8b304d3ff55fe27a230507aac79684016ac
-Author: Jon Loeliger <jdl@freescale.com>
-Date: Tue Aug 22 10:42:21 2006 -0500
+* Patch by Raghu Krishnaprasad, 7 Aug 2003:
+ add support for Adder II MPC852T module
- Cleanup compiler warnings.
+* Patch by George G. Davis, 19 Aug 2003:
+ fix TI Innovator/OMAP1510 pin configs
-commit 5de62c47a8628b3da4d73f7c07027f32a3342d40
-Author: Matthew McClintock <msm@freescale.com>
-Date: Tue Aug 22 09:31:59 2006 -0500
+* Patches by Kshitij, 18 Aug 2003
+ - add support for arm926ejs cpu core
+ - add support for TI OMAP 1610 Innovator Board
- Fix disable_of booting
+* Patch by Yuli Barcohen, 14 Aug 2003:
+ add support for bzip2 uncompression
- Signed-off-by: Matthew McClintock <msm@freescale.com>
+* Add GCC library to examples/Makefile so GCC utility functions will
+ be resolved, too
-commit 87a449c8ac396420cb24260f717ea9e6faa82047
-Author: Matthew McClintock <msm@freescale.com>
-Date: Tue Aug 22 09:23:55 2006 -0500
+* Add I2C and RTC support for RMU board using software I2C driver
+ (because of better response to iprobe command); fix problem with
+ "reset" command
- Support for FDT in uImage format, error when using FDT from flash
+* Patch by Matthias Fuchs, 28 Aug 2003:
+ Added CONFIG_BOOTP_DNS2 and CONFIG_BOOTP_SEND_HOSTNAME to
+ CONFIG_BOOTP_MAKS (see README).
- Signed-off-by: Matthew McClintock <msm@freescale.com>
+* Fix ICU862 environment problem
-commit 75c299c38369d01addd5e054b8a16217b70f4a86
-Author: Haiying Wang <haiying.wang@freescale.com>
-Date: Tue Aug 15 15:12:55 2006 -0400
+* Fix RAM size detection for RMU board
- Unlock cache before kernel starts up for MPC86xx
+* Implement "reset" for MGT5100/MPC5200 systems
-commit 67256678f00c09b0a7f19e862e5c1847553d31bc
-Author: Haiying Wang <haiying.wang@freescale.com>
-Date: Tue Aug 15 15:13:15 2006 -0400
+======================================================================
+Changes for U-Boot 0.4.6:
+======================================================================
- Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
+* Make Ethernet autonegotiation on INCA-IP work for all clock rates;
+ allow selection of clock frequency as "make" target
-commit 1c8f6d8fb028f156094d05f2d14298e6479364ac
-Author: Haiying Wang <haiying.wang@freescale.com>
-Date: Tue Aug 15 15:12:55 2006 -0400
+* Implement memory autosizing code for IceCube boards
- Unlock cache before kernel starts up for MPC86xx
+* Configure network port on INCA-IP for autonegotiation
-commit 0d9ccc55edf9a7f3c5b2b6263580a6ea8d702a04
-Author: Haiying Wang <haiying.wang@freescale.com>
-Date: Tue Aug 15 15:13:15 2006 -0400
+* Fix overflow problem in network timeout code
- Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
+* Patch by Richard Woodruff, 8 Aug 2003:
+ Allow crc32 to be used at address 0x000 (crc32_no_comp, too).
-commit 86c8e17f25e972a7e272950a0735fad84e082b88
-Author: Matthew McClintock <msm@freescale.com>
-Date: Wed Aug 16 13:59:47 2006 -0500
+======================================================================
+Changes for U-Boot 0.4.5:
+======================================================================
- * Fix disable_of booting
+* Update for TQM board defaults:
+ disable clocks_in_mhz, enable boot count limit
- Signed-off-by: Matthew McClintock <msm@freescale.com>
+* Removed tools/gdb from "make all" target. Added make target "gdbtools"
+ in toplevel directory instead. Removed astest.c from tools/gdb because
+ it is no longer relevant.
-commit 25c751e9adc86e22fe3b5b47cf2806379b575db7
-Author: Matthew McClintock <msm@freescale.com>
-Date: Wed Aug 16 10:54:09 2006 -0500
+* Fix PCI support for MPC5200 / IceCube Board
- * Support for FDT in uImage format, error when using FDT from flash
+* Map ISP1362 USB OTG controller for NSCU board
- Signed-off-by: Matthew McClintock <msm@freescale.com>
+* Patch by Brad Parker, 02 Aug 2003:
+ fix sc520_cdp problems
-commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b
-Author: Jon Loeliger <jdl@freescale.com>
-Date: Mon Aug 14 15:33:38 2006 -0500
+* Implement Boot Cycle Detection (Req. 2.3 of OSDL CGL Reqirements)
- Fix BAT0 to actually be cacheable, non-guarded as documented.
+* Allow erase command to cross flash bank boundaries
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
+* Patch by Scott McNutt, 21 Jul 2003:
+ Add support for LynuxWorks Kernel Downloadable Images (KDIs).
+ Both LynxOS and BlueCat linux KDIs are supported.
-commit 40bc83559db5745681909fd7382ae509567e116d
-Author: Jon Loeliger <jdl@freescale.com>
-Date: Wed Aug 9 15:32:16 2006 -0500
+* Patch by Richard Woodruff, 25 Jul 2003:
+ use more reliable reset for OMAP/925T
- Removed MPC8641HPCN DTS source file from build.
- It is no longer linked into U-Boot; its sources are
- now located in the kernel tree.
+* Patch by Nye Liu, 25 Jul 2003:
+ fix typo in mpc8xx.h
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
+* Patch by Richard Woodruff, 24 Jul 2003:
+ Fixes for cmd_nand.c:
+ - Fixed null dereferece which could result in incorrect ECC values.
+ - Added support for devices with no Ready/Busy signal hooked up.
+ - Added OMAP1510 read/write protect handling.
+ - Fixed nand.h's ECCPOS. A conflict existed with POS5 and badblock
+ for non-JFFS2.
+ - Switched default ECC to be JFFS2.
-commit 34c3c0e01dbf1f8cc2bd08de92f2b89ba84921eb
-Author: Matthew McClintock <msm@freescale.com>
-Date: Wed Jun 28 10:47:03 2006 -0500
+* Allow crc32 to be used at address 0x000
- * Switched default PCI speed for 8540 ADS back to 33MHz
+* Provide consistent interface to standalone applications to access
+ the 'global_data' structure
+ Provide a doc/README.standalone more useful to users/developers.
- * Added comments and a printf to warn that PCI-X won't
- work at 33MHz
- Patch by Andy Fleming 17-Mar-2006
+* Make IceCube MGT5100 FEC driver work
- Signed-off-by: Andy Fleming <afleming@freescale.com>
+* Implement new mechanism to export U-Boot's functions to standalone
+ applications: instead of using (PPC-specific) system calls we now
+ use a jump table; please see doc/README.standalone for details
-commit b6c5e1373b6ea0bb37a18e4aeecec00613d1cd39
-Author: Matthew McClintock <msm@freescale.com>
-Date: Wed Jun 28 10:46:35 2006 -0500
+* Patch by Dave Westwood, 24 Jul 2003:
+ added support for Unity OS (a proprietary OS)
- * Fixed a bug where 8555 PCI code used the old variable and function names Patch by Andy Fleming 17-Mar-2006
+* Patch by Detlev Zundel, 23 Jul 2003:
+ add "imls" command to print flash table of contents
- Signed-off-by: Andy Fleming <afleming@freescale.com>
+* Fix cold boot detection for log buffer reset
-commit bf1dfffd8c26f8ecdd630a0ae4c834e751e4e452
-Author: Matthew McClintock <msm@freescale.com>
-Date: Wed Jun 28 10:46:13 2006 -0500
+* Return error for invalid length specifiers with "cp.X" etc.
- * Added VIA configuration table
+* Fix startup problem on MIPS
- * Added support for PCI2 on CDS
- Patch by Andy Fleming 17-Mar-2006
+* Allow for CONFIG_SPLASH_SCREEN even when no explicit
+ bitmap support is configured
- Signed-off-by: Andy Fleming <afleming@freescale.com>
+* Patch by Bill Hargen, 18 Jul 2003:
+ - fix endinaness problem in cpu/mpc824x/drivers/i2c/i2c1.c
-commit c88f9fe66b64247e5b6a38410ba315ca25596d16
-Author: Matthew McClintock <msm@freescale.com>
-Date: Wed Jun 28 10:45:41 2006 -0500
+* Patch by Denis Peter, 18 Jul 2003:
+ - fix memory configuration for MIP405T
+ - fix printout of baudrate for "loadb <loadaddr> <baudrate>"
- * Fixed PCI memory definitions Patch by Andy Fleming 17-Mar-2006
+* Cleanup of TQM82xx configurations; use "official" board types
+ to make selection easier.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
+* Patch by Martin Krause, 17 Jul 2003:
+ add delay to get I2C working with "imm" command and s3c24x0_i2c.c
-commit 97074ed9655309b64231bc2cee69fe85399f8055
-Author: Matthew McClintock <msm@freescale.com>
-Date: Wed Jun 28 10:45:17 2006 -0500
+* Patch by Richard Woodruff, 17 July 03:
+ - Fixed bug in OMAP1510 baud rate divisor settings.
- * Added support for initializing second PCI bus on 85xx Patch by Andy Fleming 17-Mar-2006
+* Patch by Nye Liu, 16 July 2003:
+ MPC860FADS fixes:
+ - add MPC86xADS support (uses MPC86xADS.h)
+ - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T)
+ o PLPRCR changes
+ o BRG changes (EXTAL/XTAL restricted to 10MHz)
+ o don't trust gclk() software measurement by default, depend on
+ CONFIG_8xx_GCLK_FREQ
+ - add DRAM SIMM not installed detection
+ - use more "correct" SDRAM initialization sequence
+ - allow different SDRAM sizes (8xxADS has 8M)
+ - default DER is 0
+ - remove unused MAMR defines from FADS860T.h (all done in fads.c)
+ - rename MAMR/MBMR defines to be more consistent. Should eventually
+ be merged into MxMR to better reflect the PowerQUICC datasheet.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
+* Patch by Yuli Barcohen, 16 Jul 2003:
+ support new Motorola PQ2FADS-ZU evaluation board which replaced
+ MPC8260ADS and MPC8266ADS
-commit f0e6f57f71b3c4fdd13028eb03c3f3e91926dda2
-Author: Matthew McClintock <msm@freescale.com>
-Date: Wed Jun 28 10:44:49 2006 -0500
+======================================================================
+Changes for U-Boot 0.4.4:
+======================================================================
- * Added PCI-X #defines for PCI-X initialization Patch by Andy Fleming on 17-Mar-2006
+* Add support for IceCube board (with MGT5100 and MPC5200 CPUs)
- Signed-off-by: Andy Fleming <afleming@freescale.com>
+* Add support for MGT5100 and MPC5200 processors
-commit a4e11558b810ef2cddffdf7b9d86bc1130441960
-Author: Matthew McClintock <msm@freescale.com>
-Date: Wed Jun 28 10:44:23 2006 -0500
+* Patch by Lutz Dennig, 15 Jul 2003:
+ update for R360MPI board
- * Made sure the code which disables prefetch for PCI devices sets the size of the prefetch region to 0 Patch by Andy Fleming on 17-Mar-2006
+======================================================================
+Changes for U-Boot 0.4.3:
+======================================================================
- Signed-off-by: Andy Fleming <afleming@freescale.com>
+* Patches by Kshitij, 04 Jul 2003
+ - added support for arm925t cpu core
+ - added support for TI OMAP 1510 Innovator Board
-commit 0e16387db1d4aacd5bf35cb6d7c1942765c0347b
-Author: Matthew McClintock <msm@freescale.com>
-Date: Wed Jun 28 10:43:36 2006 -0500
+* Patches by Martin Krause, 14 Jul 2003:
+ - add I2C support for s3c2400 systems (trab board)
+ - (re-) add "ping" to command table
- * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards Patch by Jon Loeliger 17-Jan-2006
+* Fix handling of "slow" POST routines
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
+* Patches by Yuli Barcohen, 13 Jul 2003:
+ - Correct flash and JFFS2 support for MPC8260ADS
+ - fix PVR values and clock generation for PowerQUICC II family
+ (8270/8275/8280)
-commit 855e6fb073f9d04fe4a7f06c107ecbac6344ddd4
-Author: Matthew McClintock <msm@freescale.com>
-Date: Wed Jun 28 10:43:00 2006 -0500
+* Patch by Bernhard Kuhn, 08 Jul 2003:
+ - add support for M68K targets
- * Removed the oftree.dts for stxxtx in light of the changes to the flat device tree handling code Patch by Matthew McClintock 26-June-2006
+* Patch by Ken Chou, 3 Jul:
+ - Fix PCI config table for A3000
+ - Fix iobase for natsemi.c
+ (PCI_BASE_ADDRESS_0 is the IO base register for DP83815)
-commit 5498d90312aad9f6bdbf047986027c35b03cd163
-Author: Matthew McClintock <msm@freescale.com>
-Date: Wed Jun 28 10:42:24 2006 -0500
+* Allow to enable "slow" POST routines by key press on power-on
+* Fix temperature dependend switching of LCD backlight on LWMON
+* Tweak output format for LWMON
- * Patch to modify ft_build.c to update flat device trees in place Patch by Matthew McClintock 26-June-2006
+* Patch by Stefan Roese, 11 Jul 2003:
+ - Fix bug in CONFIG_VERSION_VARIABLE.
+ - AR405 config updated.
+ - OCRTC/ORSG: bsp command added.
+ - ASH405 bsp update.
-commit 0267768eddc5ca7bc1865bc40c866829ac5efbfe
-Author: Matthew McClintock <msm@freescale.com>
-Date: Wed Jun 28 10:41:37 2006 -0500
+======================================================================
+Changes for U-Boot 0.4.2:
+======================================================================
- * Modify bootm command to support booting with flat device trees Patch by Matthew McClintock 26-June-2006
+* Add support for NSCU board
-commit 8fc8bd2cc479b6cd188fdede4010e0e052970b8a
-Author: John Traill <john.traill@freescale.com>
-Date: Wed Aug 9 14:33:50 2006 +0100
+* Add support for TQM823M, TQM850M, TQM855M and TQM860M modules
- Add Rapidio support for the MPC8641HPCN
+* Add support for Am29LV160ML, Am29LV320ML, and Am29LV640ML
+ mirror bit flash on TQM8xxM modules
- Signed-off-by: John Traill <john.traill@freescale.com>
+* Patch by Kenneth Johansson, 30 Jun 2003:
+ get rid of MK_CMD_ENTRY macro; update doc/README.command
-commit 91a414c7d1fb0eac912592cd995b30c9f23045c9
-Author: John Traill <john.traill@freescale.com>
-Date: Tue Aug 8 11:32:43 2006 +0100
+* Patch by Seb James, 30 Jun 2003:
+ Improve documentation of I2C configuration in README
- Fix caslat calculation
+* Fix problems with previous log buffer "fixes"
- Signed-off-by: John Traill <john.traill@freescale.com>
+* Fix minor help text issues
-commit 709d3073e74153278e7904a70819bbef7df50e1a
-Author: Jon Loeliger <jdl@freescale.com>
-Date: Thu Aug 3 16:17:56 2006 -0500
+* "log append" did not append a newline
- Convert to mac-address in ethernet nodes.
+======================================================================
+Changes for U-Boot 0.4.1:
+======================================================================
+
+* Fix some missing commands, cleanup header files
+ (autoscript, bmp, bsp, fat, mmc, nand, portio, ...)
+
+* Rewrite command lookup and help command (fix problems with bubble
+ sort when sorting command name list). Minor cleanup here and there.
+
+* Merge from "stable branch", tag LABEL_2003_06_28_1800-stable:
+ - Allow to call sysmon function interactively
+ - PIC on LWMON board needs delay after power-on
+ - Add missing RSR definitions for MPC8xx
+ - Improve log buffer handling: guarantee clean reset after power-on
+ - Add support for EXBITGEN board (aka "genie")
+ - Add support for SL8245 board
+
+* Code cleanup:
+ - remove trailing white space, trailing empty lines, C++ comments, etc.
+ - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)
+
+* Patches by Kenneth Johansson, 25 Jun 2003:
+ - major rework of command structure
+ (work done mostly by Michal Cendrowski and Joakim Kristiansen)
+
+======================================================================
+Changes for U-Boot 0.4.0:
+======================================================================
+
+* Patches by Robert Schwebel, 26 Jun 2003:
+ - csb226 configuration updated
+ - credits for logodl port updated
+ - innokom configuration updated
+ - logodl tree update, still with coding style inconsistencies
+ - added OCM for ppc405 warning to README
+
+* Patch by Pantelis Antoniou, 25 Jun 2003:
+ update NetVia with V2 board support
+
+* Header file cleanup for ARM
+
+* Patch by Murray Jensen, 24 Jun 2003:
+ - make sure to use only U-boot provided header files
+ - fix problems with ".rodata.str1.4" section as used by GCC-3.x
+
+* Patch by Stefan Roese, 24 Jun 2003:
+ - Update esd ASH405 board files.
+ - Update esd DASA_SIM config file.
+ - Add ping command to some esd boards.
+
+* Patch by Yuli Barcohen, 23 Jun 2003:
+ Update for MPC8260ADS board
+
+* Patch by Murray Jensen, 23 Jun 2003:
+ - cleanup of GCC 3.x compiler warnings
+
+* Patch by Rune Torgersen, 4 Jun 2003:
+ add large memory support for MPC8266ADS board
+
+* Patch by Richard Woodruff, 19 June 03:
+ - Enabled standard u-boot device abstraction for ARM
+ - Enabled console device for ARM
+ - Initilized bi_baudrate for ARM
+
+* Patch by Bill Hargen, 23 Apr 2003:
+ fix byte order for 824x I2C addresses (write op)
+
+* Patch by Murray Jensen, 20 Jun 2003:
+ - hymod update
+ - cleanup (especially for gcc-3.x compilers)
+
+* Patch by Tom Guilliams, 20 Jun 2003:
+ added CONFIG_750FX support for IBM 750FX processors
+
+* Patch by Devin Crumb, 02 Apr 2003:
+ Fix clock divider rounding problem in drivers/serial.c
+
+* Patch by Richard Woodruff, 19 June 03:
+ - Fixed smc91c111 driver to sync with the u-boot environment
+ (driver/smc91c111.c).
+ - Added eth_init error return check in NetLoop (net/net.c).
+
+* Patch by Ken Chou, 19 June 2003:
+ Added support for A3000 SBC board (Artis Microsystems Inc.)
+
+* Patches by Murray Jensen, 17 Jun 2003:
+ - Hymod board database mods: add "who" field and new xilinx chip types
+ - provide new "init_cmd_timeout()" function so code external to
+ "common/main.c" can use the "reset_cmd_timeout()" function before
+ entering the main loop
+ - add DTT support for adm1021 (new file dtt/adm1021.c; config
+ slightly different. see include/configs/hymod.h for an example
+ (requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and
+ CFG_DTT_ADM1021 defined)
+ - add new "eeprom_probe()" function which has similar args and
+ behaves in a similar way to "eeprom_read()" etc.
+ - add 8260 FCC ethernet loopback code (new "eth_loopback_test()"
+ function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST)
+ - gdbtools copyright update
+ - ensure that set_msr() executes the "sync" and "isync" instructions
+ after the "mtmsr" instruction in cpu/mpc8260/interrupts.c
+ - 8260 I/O ports fix: Open Drain should be set last when configuring
+ - add SIU IRQ defines for 8260
+ - allow LDSCRIPT override and OBJCFLAGS initialization: change to
+ config.mk to allow board configurations to override the GNU
+ linker script, selected via the LDSCRIPT, make variable, and to
+ give an initial value to the OBJCFLAGS make variable
+ - 8260 i2c enhancement:
+ o correctly extends the timeout depending on the size of all
+ queued messages for both transmit and receive
+ o will not continue with receive if transmit times out
+ o ensures that the error callback is done for all queued tx
+ and rx messages
+ o correctly detects both tx and rx timeouts, only delivers one to
+ the callback, and does not overwrite an earlier error
+ o logic in i2c_probe now correct
+ - add "vprintf()" function so that "panic()" function can be
+ technically correct
+ - many Hymod board changes
+
+* Patches by Robert Schwebel, 14 Jun 2003:
+ - add support for Logotronic DL datalogger board
+ - cleanup serial line after kermit binary download
+ - add debugX macro (debug level support)
+ - update mach-types.h to latest arm.linux.org.uk master list.
+
+* Patches by David Müller, 12 Jun 2003:
+ - rewrite of the S3C24X0 register definitions stuff
+ - "driver" for the built-in S3C24X0 RTC
+
+* Patches by Yuli Barcohen, 12 Jun 2003:
+ - Add MII support and Ethernet PHY initialization for MPC8260ADS board
+ - Fix incorrect SIUMCR initialisation caused by wrong Hard Reset
+ configuration word supplied by FPGA on some MPC8260ADS boards
+
+* Patch by Pantelis Antoniou, 10 Jun 2003:
+ Unify status LED interface
+
+* Add support for DS12887 RTC; add RTC support for ATC board
+
+* Patch by Nicolas Lacressonniere, 11 Jun 2003:
+ Modifications for Atmel AT91RM9200DK ARM920T based development kit
+ - Add Atmel DataFlash support for reading and writing.
+ - Add possibility to boot a Linux from DataFlash with BOOTM command.
+ - Add Flash detection on Atmel AT91RM9200DK
+ (between Atmel AT49BV1614 and AT49BV1614A flashes)
+ - Replace old Ethernet PHY layer functions
+ - Change link address
+
+* Patch by Frank Smith, 9 Jun 2003:
+ use CRIT_EXCEPTION for machine check on 4xx
+
+* Patch by Detlev Zundel, 13 Jun 2003:
+ added implementation of the "carinfo" command in cmd_immap.c
+
+* Fix CONFIG_NET_MULTI support in include/net.h
+
+* Patches by Kyle Harris, 13 Mar 2003:
+ - Add FAT partition support
+ - Add command support for FAT
+ - Add command support for MMC
+ ----
+ - Add Intel PXA support for video
+ - Add Intel PXA support for MMC
+ ----
+ - Enable MMC and FAT for lubbock board
+ - Other misc changes for lubbock board
+
+* Patch by Robert Schwebel, April 02, 2003:
+ fix for SMSC91111 driver
+
+* Patch by Vladimir Gurevich, 04 Jun 2003:
+ make ppc405 ethernet driver compatible with CONFIG_NET_MULTI option
+
+* Patch by Stefan Roese, 05 Jun 2003:
+ - PPC4xx: Fix bug for initial stack in data cache as pointed out by
+ Thomas Schaefer (tschaefer@giga-stream.de). Now inital stack in
+ data cache can be used even if the chip select is in use.
+ - CFG_RX_ETH_BUFFER added to set the ethernet receive buffer count
+ (see README for further description).
+ - Changed config files of CONFIG_EEPRO100 boards to use the
+ CFG_RX_ETH_BUFFER define.
+
+* Add support for RMU board
+
+* Add support for TQM862L at 100/50 MHz
+
+* Patch by Pantelis Antoniou, 02 Jun 2003:
+ major reconstruction of networking code;
+ add "ping" support (outgoing only!)
+
+* Patch by Denis Peter, 04 June 2003:
+ add support for the MIP405T board
+
+* Patches by Udi Finkelstein, 2 June 2003:
+ - Added support for custom keyboards, initialized by defining a
+ board-specific drv_keyboard_init as well as defining CONFIG_KEYBOARD .
+ - Added support for the RBC823 board.
+ - cpu/mpc8xx/lcd.c now automatically calculates the
+ Horizontal Pixel Count field.
+
+* Fix alignment problem in BOOTP (dhcp_leasetime option)
+ [pointed out by Nicolas Lacressonnière, 2 Jun 2003]
+
+* Patch by Mark Rakes, 14 May 2003:
+ add support for Intel e1000 gig cards.
+
+* Patch by Nye Liu, 3 Jun 2003:
+ fix critical typo in MAMR definition (include/mpc8xx.h)
+
+* Fix requirement to align U-Boot image on 16 kB boundaries on PPC.
+
+* Patch by Klaus Heydeck, 2 Jun 2003
+ Minor changes for KUP4K configuration
-commit 71748af833ca1017edf1415be376366ff2937d17
-Author: Haiying Wang <haiying.wang@freescale.com>
-Date: Fri Jul 28 12:41:35 2006 -0400
+* Patch by Marc Singer, 29 May 2003:
+ Fixed rarp boot method for IA32 and other little-endian CPUs.
- Correct the irq value of DUART2
+* Patch by Marc Singer, 28 May 2003:
+ Added port I/O commands.
-commit 9cb3e8816ae4d854e7dc22128c3eea3d70bb982c
-Author: Haiying Wang <haiying.wang@freescale.com>
-Date: Fri Jul 28 12:41:41 2006 -0400
+* Patch by Matthew McClintock, 28 May 2003
+ - cpu/mpc824x/start.S: fix relocation code when booting from RAM
+ - minor patches for utx8245
- Change the space size of PEX IO in README
+* Patch by Daniel Engström, 28 May 2003:
+ x86 update
-commit 239db37c94f7a92941c4465feceb867c609241c5
-Author: Haiying Wang <haiying.wang@freescale.com>
-Date: Fri Jul 28 12:41:18 2006 -0400
+* Patch by Dave Ellis, 9 May 2003 + 27 May 2003:
+ add nand flash support to SXNI855T configuration
+ fix/extend nand flash support:
+ - fix 'nand erase' command so does not erase bad blocks
+ - fix 'nand write' command so does not write to bad blocks
+ - fix nand_probe() so handles no flash detected properly
+ - add doc/README.nand
+ - add .jffs2 and .oob options to nand read/write
+ - add 'nand bad' command to list bad blocks
+ - add 'clean' option to 'nand erase' to write JFFS2 clean markers
+ - make NAND read/write faster
- Move get_board_sys_clk to board directory
+* Patch by Rune Torgersen, 23 May 2003:
+ Update for MPC8266ADS board
-commit 492900b985439fbce1a118afde1e35def870db03
-Author: John Traill <john.traill@freescale.com>
-Date: Fri Jul 28 09:03:54 2006 +0100
+* Get (mostly) rid of CFG_MONITOR_LEN definition; compute real length
+ instead CFG_MONITOR_LEN is now only used to determine _at_compile_
+ _time_ (!) if the environment is embedded within the U-Boot image,
+ or in a separate flash sector.
- Fix 8641HPCN pollution
+* Cleanup CFG_DER #defines in config files (wd maintained only)
-commit 515ab8a62e8574e2babc6e8dcc43544ad221c5b2
-Author: John Traill <john.traill@freescale.com>
-Date: Fri Jul 28 08:16:06 2006 +0100
+* Fix data abort exception handling for arm920t CPU
- Fix 8641HPCN timebase
+* Fix alignment problems with flash driver for TRAB board
-commit c86360b830f1eecd7a72208575dde4f57879faea
-Author: Zhang Wei <wei.zhang@freescale.com>
-Date: Fri Jul 28 00:01:34 2006 +0800
+* Patch by Donald White, 21 May 2003:
+ fix calculation of base address in pci_hose_config_device()
- Fixed OF device tree of mpc86xxhpcn board.
+* Fix bug in command line parsing: "cmd1;cmd2" is supposed to always
+ execute "cmd2", even if "cmd1" fails. Note that this is different
+ to "run var1 var2" where the contents of "var2" will NOT be
+ executed when a command in "var1" fails.
- The changes works in with kernel irq mapping rework.
+* Add zero-copy ramdisk support (requires corresponding kernel support!)
- Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
+* Patch by Kyle Harris, 20 May 2003:
+ In preparation for an ixp port, rename cpu/xscale and arch-xscale
+ into cpu/pxa and arch-pxa.
-commit bea3f28d285942bf3f7ab339ce85178ded544225
-Author: Haiying Wang <haiying.wang@freescale.com>
-Date: Wed Jul 12 10:48:05 2006 -0400
+* Patch by Stefan Roese, 23 May 2003:
+ - IBM PPC405EP port added.
+ - CONFIG_UART1_CONSOLE added. If defined internal UART1 (and not
+ UART0) is used as default U-Boot console. PPC4xx only!
+ - esd ASH405 board added (PPC405EP based).
+ - BUBINGA405EP board added (PPC405EP based - IBM Eval Board).
+ - esd CPCI405AB board added.
+ - esd PMC405 board added.
+ - Update of some esd boards.
- Add support for reading and writing mac addresses to or from ID EEPROM.
+* Patch by Denis Peter, 19 Mai 2003:
+ add support for the MIP405-3 board
- Added code for reading and writing Mac addresses to/from ID EEPROM(0x57).
- With attached patch, we can use command "mac/mac read/mac save/"
- to read and write EEPROM under u-boot prompt.
+* Patch by Dave Ellis, 22 May 2003:
+ Fix problem with only partially cleared .bss segment
- U-boot will calculate the checksum of EEPROM while bootup,
- if it is right, then u-boot will check whether the mac address
- of eTSEC0/1/2/3 is availalbe (non-zero).
+* Patch by Rune Torgersen, 12 May 2003:
+ get PCI to work on a MPC8266ADS board; incorporate change to
+ cpu/mpc8260/pci.c to enable overrides of PCI memory parameters
- If there is mac address availabe in EEPROM, u-boot will use it,
- otherewise, u-boot will use the mac address defined in
- MPC8641HPCN.h. This matches the requirement to set unique mac address
- for each TSEC port.
+* Patch by Nye Liu, 1 May 2003:
+ minor patches for the FADS8xx
- Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
- Signed-off-by: York Sun <yorksun@freescale.com>
+* Patch by Thomas Schäfer, 28 Apr 2003:
+ Fix SPD handling for 256 ECC DIMM on Walnut
-commit fcb28e763415e0e4e66b0f45842d1557ae198e5e
-Author: Jin Zhengxiong <Jason.Jin@freescale.com>
-Date: Thu Jul 13 10:35:10 2006 -0500
+* Add support for arbitrary bitmaps for TRAB's VFD command;
+ allow to pass boot bitmap addresses in environment variables;
+ allow for zero boot delay
- Fixed initrd issue by define big RAM
+* Patch by Christian Geißinger, 19 May 2002:
+ On TRAB: wait until the dummy byte has been completely sent
- Signed-off-by:Jason Jin <Jason.jin@freescale.com>
+* Patch by David Updegraff, 22 Apr 2003:
+ update for CrayL1 board
-commit e6cd2a1785d74ec3d30a86f1cb360be8de478151
-Author: Jason Jin <Jason.jin@freescale.com>
-Date: Fri Jul 7 10:01:45 2006 -0500
+* Patch by Pantelis Antoniou, 21 Apr 2003:
+ add boot support for ARTOS (a proprietary OS)
- We made a u-boot patch to fix the hang up issue
- when booting filesystem from ramdisk.
+* Patch by Steven Scholz, 11 Apr 2003:
+ Add support for RTC DS1338
- Signed-off-by:Jason Jin <Jason.jin@freescale.com>
+* Patch by Rod Boyce, 24 Jan 2003:
+ Fix counting of extended partitions in diskboot command
-commit 38433ccc5850ee70549af0b2bc5b920355ef5388
-Author: Matthew McClintock <msm@freescale.com>
-Date: Wed Jun 28 10:47:03 2006 -0500
+* Patch by Christophe Lindheimer, 20 May 2003:
+ allow the use of CFG_LOADS when CFG_NO_FLASH is set
- * Switched default PCI speed for 8540 ADS back to 33MHz
- * Added comments and a printf to warn that PCI-X won't
- work at 33MHz
- Patch by Andy Fleming 17-Mar-2006
+* Fix SDRAM timing on Purple board
- Signed-off-by: Andy Fleming <afleming@freescale.com>
+* Add support for CompactFlash on ATC board
+ (includes support for Intel 82365 and compatible PC Card controllers,
+ and Yenta-compatible PCI-to-CardBus controllers)
-commit e4c2a0eb0c3e3ffbf824800184ee42bdc99d5b19
-Author: Matthew McClintock <msm@freescale.com>
-Date: Wed Jun 28 10:46:35 2006 -0500
+* Patch by Mathijs Haarman, 08 May 2003:
+ Add lan91c96 driver (tested on Lubbock and custom PXA250 board only)
- * Fixed a bug where 8555 PCI code used the old variable and
- function names
- Patch by Andy Fleming 17-Mar-2006
+* Fix problem with usage of "true" (undefined in current versions of bfd.h)
- Signed-off-by: Andy Fleming <afleming@freescale.com>
+* Add support for Promess ATC board
-commit cbfc7ce756b88eb26e5537bc7b625c445c6dcfac
-Author: Matthew McClintock <msm@freescale.com>
-Date: Wed Jun 28 10:46:13 2006 -0500
+* Patch by Keith Outwater, 28 Apr 2003:
+ - Miscellaneous corrections and additions to GEN860T board specific code.
+ - Added GEN860_SC variant to GEN860T.
+ - Miscellaneous corrections to GEN860T documentation.
+ - Correct duplicate entry in U-Boot CREDITS file.
+ - Add GEN860T_SC entry in MAINTAINERS file.
+ - Update CREDITS file with GEN860T_SC info.
- * Added VIA configuration table
- * Added support for PCI2 on CDS
- Patch by Andy Fleming 17-Mar-2006
+* Update Smiths Aerospace addresses in MAINTAINERS file
- Signed-off-by: Andy Fleming <afleming@freescale.com>
+* Fix error handling in hush's version of "run" command
-commit 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc
-Author: Matthew McClintock <msm@freescale.com>
-Date: Wed Jun 28 10:45:41 2006 -0500
+* LWMON extensions:
+ - Splashscreen support
+ - modem support
+ - sysmon support
+ - temperature dependend enabling of LCD
- * Fixed PCI memory definitions
- Patch by Andy Fleming 17-Mar-2006
+* Allow booting from old "PPCBoot" disk partitions
- Signed-off-by: Andy Fleming <afleming@freescale.com>
+* Add support for TQM8255 Board / MPC8255 CPU
-commit 087454609e47295443af793a282cddcd91a5f49c
-Author: Matthew McClintock <msm@freescale.com>
-Date: Wed Jun 28 10:45:17 2006 -0500
+======================================================================
+Changes for U-Boot 0.3.1:
+======================================================================
- * Added support for initializing second PCI bus on 85xx
- Patch by Andy Fleming 17-Mar-2006
+* Make sure Block Lock Bits get cleared in R360MPI flash driver
- Signed-off-by: Andy Fleming <afleming@freescale.com>
+* MPC823 LCD driver: Fill color map backwards, to allow for steady
+ display when Linux takes over
-commit b636aaeb6fd516a442fb611bbeeddf3077a687fb
-Author: Matthew McClintock <msm@freescale.com>
-Date: Wed Jun 28 10:44:49 2006 -0500
+* Patch by Erwin Rol, 27 Feb 2003:
+ Add support for RTEMS (this time for real).
- * Added PCI-X #defines for PCI-X initialization
- Patch by Andy Fleming on 17-Mar-2006
+* Add support for "bmp info" and "bmp display" commands to load
+ bitmap images; this can be used (for example in a "preboot"
+ command) to display a splash screen very quickly after poweron.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
+* Add support for 133 MHz clock on INCA-IP board
-commit 20abbc6fffa115690107cc942c7abf84bdc03a1b
-Author: Matthew McClintock <msm@freescale.com>
-Date: Wed Jun 28 10:44:23 2006 -0500
+* Patch by Lutz Dennig, 10 Apr 2003:
+ Update for R360MPI board
- * Made sure the code which disables prefetch for PCI devices
- sets the size of the prefetch region to 0
- Patch by Andy Fleming on 17-Mar-2006
+* Add new meaning to "autostart" environment variable:
+ If set to "no", a standalone image passed to the
+ "bootm" command will be copied to the load address
+ (and eventually uncompressed), but NOT be started.
+ This can be used to load and uncompress arbitrary
+ data.
- Signed-off-by: Andy Fleming <afleming@freescale.com>
+* Patch by Stefan Roese, 10 Apr 2003:
+ Changed DHCP client to use IP address from server option field #54
+ from the OFFER packet in the server option field #54 in the REQUEST
+ packet. This fixes a problem using a Windows 2000 DHCP server,
+ where the DHCP-server is not the TFTP-server.
-commit 40d5fa35d02df22580593bf0039ab173367e8ef0
-Author: Matthew McClintock <msm@freescale.com>
-Date: Wed Jun 28 10:43:36 2006 -0500
+* Set max brightness for MN11236 displays on TRAB board
- * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards
- Patch by Jon Loeliger 17-Jan-2006
+* Add support for TQM862L modules
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
+======================================================================
+Changes for U-Boot 0.3.0:
+======================================================================
-commit be7e8b0cb5a0c49dc180075b96df296a893bf146
-Author: Matthew McClintock <msm@freescale.com>
-Date: Wed Jun 28 10:43:00 2006 -0500
+* Patch by Arun Dharankar, 4 Apr 2003:
+ Add IDMA example code (tested on 8260 only)
- * Removed the oftree.dts for stxxtx in light of the changes
- to the flat device tree handling code
- Patch by Matthew McClintock 26-June-2006
+* Add support for Purple Board (MIPS64 5Kc)
-commit 1b380ec225665e73959677f3893dc658c5925e05
-Author: Matthew McClintock <msm@freescale.com>
-Date: Wed Jun 28 10:42:24 2006 -0500
+* Add support for MIPS64 5Kc CPUs
- * Patch to modify ft_build.c to update flat device trees in place
- Patch by Matthew McClintock 26-June-2006
+* Fix missing setting of "loadaddr" and "bootfile" on ARM and MIPS
-commit 98a9c4d468a942a09ebe8979bec508017f3e4462
-Author: Matthew McClintock <msm@freescale.com>
-Date: Wed Jun 28 10:41:37 2006 -0500
+* Patch by Denis Peter, 04 Apr 2003:
+ - update MIP405-4 board
- * Modify bootm command to support booting with flat device trees
- Patch by Matthew McClintock 26-June-2006
+* Patch by Stefan Roese, 4 Apr 2003:
+ - U-Boot version environment variable "ver" added
+ (CONFIG_VERSION_VARIABLE).
+ - Changed PPC405GPr version from A to B.
+ - Changed CPCI405 to use CTS instead of DSR on PPC405 UART1.
-commit da012ab661fd4ab169dd7b9b32201a4df62cf34a
-Author: Jin Zhengxiong <Jason.Jin@freescale.com>
-Date: Wed Jun 28 08:43:56 2006 -0500
+* Patches by Denis Peter, 03 April 2003:
+ - fix PCI IRQs on MPL boards
+ - fix two more un-relocated pointer problems
- Change Id to symbolic name for RTL8139
+* Fix behaviour of "run" command:
+ - print error message iv variable does not exist
+ - terminate processing of arguments in case of error
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+* Patches by Peter Figuli, 10 Mar 2003
+ - Add support for BTUART on PXA platform
+ - Add support for WEP EP250 (PXA) board
-commit bc09cf3c2bfb8d54c659cbb332f79d0950982fd0
-Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
-Date: Tue Jun 27 18:12:10 2006 +0800
+* Fix flash problems on INCA-IP; add tool to allow bruning images to
+ flash using a BDI2000
- Fix RTL8139 in big endian
+* Implement fix for I2C Edge Conditions problem for all boards that
+ use the bit-banging driver (common/soft_i2c.c)
- signed-off-by: Jason Jin <Jason.Jin@freescale.com>
- signed-off-by: Wei Zhang <wei.zhang@freescale.com>
+* Patch by Martin Winistoerfer, 23 Mar 2003
+ - Add port to MPC555/556 microcontrollers
+ - Add support for cmi customer board with
+ Intel 28F128J3A, 28F320J3A or 28F640J3A flash.
-commit fcfb9a57947fc203b99fe81ab0578f7286261f9f
-Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
-Date: Tue Jun 27 18:12:23 2006 +0800
+* Patch by Rick Bronson, 28 Mar 2003:
+ - fix common/cmd_nand.c
- Fix Tsec bug when no link
+* Patch by Arun Dharankar, 24 Mar 2003:
+ - add threads / scheduler example code
- When tftp a non-exist file from the tftp server, u-boot will check
- the link of all eth port. The original file will return wrong link
- state on the no link ports.
+* Add patches by Robert Schwebel, 31 Mar 2003:
+ - add ctrl-c support for kermit download
+ - align bdinfo output on ARM
+ - csb226 board: bring in sync with innokom/memsetup.S
+ - csb226 board: fix MDREFR handling
+ - misc doc fixes / extensions
+ - innokom board: cleanup, MDREFR fix in memsetup.S, config update
+ - add BOOT_PROGRESS to armlinux.c
- signed-off-by: Jason Jin <Jason.Jin@freescale.com>
+* Add CPU ID, version, and clock speed for INCA-IP
-commit bd22c2b97514fbfb0e03bd9c72b3445e4dbd57e2
-Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
-Date: Tue Jun 27 18:12:02 2006 +0800
+* Patches by Dave Ellis, 18 Mar 2003 for SXNI855T board:
+ - fix SRAM and SDRAM memory sizing
+ - add status LED support
+ - add MAC address for second (SCC1) ethernet port
- Fix bug for io_bar size during pci scan
+* Update default environment for TQM8260 board
+
+* Patch by Rick Bronson, 16 Mar 2003:
+ - Add NAND flash support for reading, writing, and erasing NAND
+ flash (certain forms of which are called SmartMedia).
+ - Add support for Atmel AT91RM9200DK ARM920T based development kit.
+
+* Patches by Robert Schwebel, 19 Mar 2003:
+ - use arm-linux-gcc as default compiler for ARM
+ - fix i2c fixup code
+ - fix missing baudrate setting
+ - added $loadaddr / CFG_LOAD_ADDR support to loadb
+ - moved "ignoring trailing characters" _before_ u-boot wants to
+ print out diagnostics messages; removes bogus characters at the
+ end of transmission
+
+* Patch by John Zhan, 18 Mar 2003:
+ Add support for SinoVee Microsystems SC8xx boards
+
+* Patch by Rolf Offermanns, 21 Mar 2003:
+ ported the dnp1110 related changes from the current armboot cvs to
+ current u-boot cvs. smc91111 does not work. problem marked in
+ smc91111.c, grep for "FIXME".
+
+* Patch by Brian Auld, 25 Mar 2003:
+ Add support for STM flash chips on ebony board
+
+* Add PCI support for MPC8250 Boards (PM825 module)
+
+* Patch by Stefan Roese, 25 Mar 2003:
+ - PCI405 update.
+
+* Patch by Stefan Roese, 20 Mar 2003:
+ - CPCI4052 update (support for revision 3).
+ - Set edge conditioning circuitry on PPC405GPr for compatibility
+ to existing PPC405GP designs.
+ - Clip udiv to 5 bits on PPC405 (serial.c).
+
+* Extend INCAIP board support:
+ - add automatic RAM size detection
+ - add "bdinfo" command
+ - pass flash address and size to Linux kernel
+ - switch to 150 MHz clock
+
+* Avoid flicker on the TRAB's VFD by synchronizing the enable with
+ the HSYNC/VSYNC. Requires new CPLD code (Version 101 for Rev. 100
+ boards, version 153 for Rev. 200 boards).
+
+* Patch by Vladimir Gurevich, 12 Mar 2003:
+ Fix relocation problem of statically initialized string pointers
+ in common/cmd_pci.c
+
+* Patch by Kai-Uwe Blöm, 12 Mar 2003:
+ Cleanup & bug fixes for JFFS2 code:
+ - the memory mangement was broken. It caused havoc on malloc by
+ writing beyond the block boundaries.
+ - the length calculation for files was wrong, sometimes resulting
+ in short file reads.
+ - data copying now optionally takes fragment version numbers into
+ account, to avoid copying from older data.
+ See doc/README.JFFS2 for details.
+
+* Patch by Josef Wagner, 12 Mar 2003:
+ - 16/32 MB and 50/80 MHz support with auto-detection for IP860
+ - ETH05 and BEDBUG support for CU824
+ - added support for MicroSys CPC45
+ - new BOOTROM/FLASH0 and DOC base for PM826
+
+* Patch by Robert Schwebel, 12 Mar 2003:
+ Fix the chpart command on innokom board
+
+* Name cleanup:
+ mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h
+ s/PPCBoot/U-Boot/ in some files
+ s/pImage/uImage/ in some files
+
+* Patch by Detlev Zundel, 15 Jan 2003:
+ Fix '' command line quoting
+
+* Patch by The LEOX team, 19 Jan 2003:
+ - add support for the ELPT860 board
+ - add support for Dallas ds164x RTC
+
+* Patches by David Müller, 31 Jan 2003:
+ - minimal setup for CardBus bridges
+ - add EEPROM read/write support in the CS8900 driver
+ - add support for the builtin I2C controller in the Samsung s3c24x0 chips
+ - add support for MPL's VCMA9 (Samsung s3c2410 based) board
+
+* Patch by Steven Scholz, 04 Feb 2003:
+ add support for RTC DS1307
- During the pci scan process, Some devices return bar_reponse with the
- highest bytes 0, such as the pci bridge in uli1575 return bar_response
- with 0xffffff, So the bar_size should be manually set under 64K.
+* Patch by Reinhard Meyer, 5 Feb 2003:
+ fix PLPRCR/SCCR init sequence on 8xx to allow for
+ changes of EBDF by software
+
+* Patch by Vladimir Gurevich, 07 Feb 2003:
+ "API-compatibility patch" for 4xx I2C driver
- Signed-off-by: Jason Jin <jason.jin@freescale.com>
+* TRAB fixes / extensions:
+ - Restore VFD brightness as saved in environment
+ - add support for Fujitsu flashes
+ - make sure both buzzers are turned off (drive low level)
-commit fa7db9c377bc2353a17bf1d381d65a6c418728f0
-Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
-Date: Tue Jun 27 18:11:54 2006 +0800
+* Patches by Robert Schwebel, 06 Mar 2003:
+ - fix bug in BOOTP code (must use NetCopyIP)
+ - update of CSB226 port
+ - clear BSS segment on XScale
+ - added support for i2c_init_board() function
+ - update to the Innokom plattform
- Enable PCIE1 for MPC8641HPCN board
+* Extend support for redundand environments for configurations where
+ environment size < sector size
- Signed-off-by: Jason Jin <Jason.jin@freescale.com>
+* Patch by Rune Torgersen, 13 Feb 2003:
+ Add support for Motorola MPC8266ADS board
-commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba
-Author: Jon Loeliger <jdl@freescale.com>
-Date: Thu Jun 22 08:51:46 2006 -0500
+* Patch by Kyle Harris, 19 Feb 2003:
+ patches for the Intel lubbock board:
+ memsetup.S - general cleanup (based on Robert's csb226 code)
+ flash.c - overhaul, actually works now
+ lubbock.c - fix init funcs to return proper value
- Fix bug in 8641hpcn reset command with no args.
+* Patch by Kenneth Johansson, 26 Feb 2003:
+ - Fixed off by one in RFTA calculation.
+ - No need to abort when LDF is lower than we can program it's only
+ minimum timing so clamp it to what we can do.
+ - Takes function pointer to function for reading the spd_nvram. Usefull
+ for faking data or hardcode a module without the nvram.
+ - fix other user for above change
+ - fix some comments.
- Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
- Acked-by: Jon Loeliger <jdl@freescale.com>
+* Patches by Brian Waite, 26 Feb 2003:
+ - fix port for evb64260 board
+ - fix PCI for evb64260 board
+ - fix PCI scan
-commit 8be429a5ddbf0ebe2d94174ba58fcfc7a24285dc
-Author: Zhang Wei <wei.zhang@freescale.com>
-Date: Tue Jun 20 17:47:15 2006 +0800
+* Patch by Reinhard Meyer, 1 Mar 2003:
+ Add support for EMK TOP860 Module
- Reworked IRQ mapping in OF-tree.
+* Patch by Yuli Barcohen, 02 Mar 2003:
+ Add SPD EEPROM support for MPC8260ADS board
-commit 0e4c2a17ca34001ed36d259f13cb88ada4611a8c
-Author: Jon Loeliger <jdl@freescale.com>
-Date: Thu Jun 15 21:33:37 2006 -0500
+* Patch by Robert Schwebel, 21 Jan 2003:
+ - Add support for Innokom board
+ - Don't complain if "install" fails
+ - README cleanup (remove duplicated lines)
+ - Update PXA header files
- Do not enable address translation on secondary CPUs.
- Do not set up BATs on secondary CPUs. Let Linux do the nasty.
+* Add documentation for existing POST code (doc/README.POST)
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
+* Patch by Laudney Ren, 15 Jan 2003:
+ Fix handling of redundand environment in "tools/envcrc.c"
-commit 8ecc971618f56029ad99d3516f8b297a6ed58971
-Author: Jon Loeliger <jdl@jdl.com>
-Date: Wed Jun 7 10:53:55 2006 -0500
+* Patch by Detlev Zundel, 28 Feb 2003:
+ Add bedbug support for 824x systems
- Fix a get_board_sys_clk() use-before-def warning.
+* Add support for 16 MB flash configuration of TRAB board
- Signed-off-by: Jon Loeliger <jdl@jdl.com>
+* Patch by Erwin Rol, 27 Feb 2003:
+ Add support for RTEMS
-commit d9bf4858fca5aa4d651b283270f77da72ebadfd5
-Author: Jon Loeliger <jdl@jdl.com>
-Date: Wed Jun 7 10:52:49 2006 -0500
+* Add image information to README
- Allow DTC path to be passed in.
+* Patch by Stefan Roese, 18 Feb 2003:
+ CPCIISER4 configuration updated.
- Signed-off-by: Jon Loeliger <jdl@jdl.com>
+* Patch by Stefan Roese, 17 Feb 2003:
+ Fixed bug in ext. serial clock setup on PPC405 (since PPC440 port).
-commit c83ae9ea6d93abbe751bf8a3396236a084e56f87
-Author: Haiying Wang <haiying.wang@freescale.com>
-Date: Tue Jun 6 16:54:29 2006 -0400
+* Patch by Stefan Roese, 13 Feb 2003:
+ Add "pcidelay" environment variable (in ms, enabled via
+ CONFIG_PCI_BOOTDELAY).
+ PCI spec 2.2 defines, that a pci target has 2^25 pci clocks after
+ RST# to respond to configuration cycles (33MHz -> 1s).
- Modify the IRQ of DUART2
+* Fix dual PCMCIA slot support (when running with just one
+ slot populated)
-commit c934f655f9aeca70a5c5f88b465d9e9d57a8d22e
-Author: Jon Loeliger <jdl@jdl.com>
-Date: Wed May 31 13:55:35 2006 -0500
+* Add VFD type detection to trab board
- Review cleanups.
+* extend drivers/cs8900.c driver to synchronize ethaddr environment
+ variable with value in the EEPROM
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
+* Patch by Stefan Roese, 10 Feb 2003:
+ Add support for 4MB and 128MB onboard SDRAM (cpu/ppc4xx/sdram.c)
-commit cb5965fb95b77a49f4e6af95248e0c849f4af03e
-Author: Jon Loeliger <jdl@jdl.com>
-Date: Wed May 31 12:44:44 2006 -0500
+* Add support for MIPS32 4Kc CPUs
- White space cleanup.
- Some 80-column cleanups.
- Convert printf() to puts() where possible.
- Use #include "spd_sdram.h" as needed.
- Enhanced reset command usage message a bit.
+* Add support for INCA-IP Board
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
+======================================================================
+Changes for U-Boot 0.2.2:
+======================================================================
-commit 3d5c5be547445dd3bd2eb7368d80df03ea437970
-Author: Jon Loeliger <jdl@jdl.com>
-Date: Wed May 31 11:39:34 2006 -0500
+* Add dual ethernet support on PM826
- Removed unneeded local_bus_init() from 8641HPCN board.
+* Add support for LXT971 PHY on PM826
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
+* Patch by Tord Andersson, 16 Jan 2003:
+ Fix flash sector count for TQM8xxL
-commit 4d3d729c16c392d2982d3266b659d333c927697d
-Author: Jon Loeliger <jdl@jdl.com>
-Date: Wed May 31 11:24:28 2006 -0500
+* Fix I2C EEPROM problem on ICU862 board (would only write the first
+ 16 bytes out of each 32 byte block)
- Moved mpc8641hpcn_board_reset() out of cpu/ into board/.
+======================================================================
+Changes for U-Boot 0.2.1:
+======================================================================
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
+* Add support for V37 board
+ (patch by Jón Benediktsson, 11 Dec 2002)
-commit b2a941de060350ad15878d8219825f4950e9bb8e
-Author: Jon Loeliger <jdl@jdl.com>
-Date: Wed May 31 10:07:28 2006 -0500
+* Update baudrate in bd_info when it gets changed
- Remove dead debug code.
+* Add watchdog trigger points while waiting for serial port
+ (so far only 8xx -- needed on LWMON with 100ms watchdog)
- Signed-off-by: Jon Loeliger <jdl@jdl.com>
+* Improve command line tool to access the U-Boot's environment
+ (figuration of the utility, using a config file)
-commit 126aa70f10ba3d20e0a6f4d32328250513b77770
-Author: Jon Loeliger <jdl@freescale.com>
-Date: Tue May 30 17:47:00 2006 -0500
+* Add single quote support for (old) command line parser
- Move mpc86xx PIXIS code to board directory
+* Switch LWMON board default config from FRAM to EEPROM;
+ in POST, EEPROM shows up on 8 addresses
- First cut at moving the PIXIS platform code out of
- the 86xx cpu directory and into board/mpc8641hpcn
- where it belongs.
+======================================================================
+Changes for U-Boot 0.2.0:
+======================================================================
- Signed-off-by: Jon Loeliger <jdl@freescale.com>
+* Use 1-byte-read instead of -write for iprobe() function
+ Add i2c commands to PM826 config
-commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8
-Author: Haiying Wang <Haiying.Wang@freescale.com>
-Date: Tue May 30 09:10:32 2006 -0500
+* extend I2C POST code: check for list on known addresses
- Improve "reset" command's interaction with watchdog.
+* Improve log buffer code; use "loglevel" to decide which messages
+ to log on the console, too (like in Linux); get rid of "logstart"
- "reset altbank" will reset another bank WITHOUT watch dog timer enabled
- "reset altbank wd" will reset another bank WITH watch dog enabled
- "diswd" will disable watch dog after u-boot boots up successfully
+* Add command line tool to access the U-Boot's environment
+ (board-specific for TRAB now, to be fixed later)
- Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+* Patch by Hans-Joerg Frieden, 06 Dec 2002
+ Fix misc problems with AmigaOne support
-commit 70205e5a6ddc8528b11db9eb4d3fa0209d9fce2a
-Author: Haiying Wang <Haiying.Wang@freescale.com>
-Date: Tue May 30 08:51:19 2006 -0500
+* Patch by Chris Hallinan, 3 Dec 2002:
+ minor cleanup to the MPC8245 EPIC driver
- Fix two SDRAM setup bugs.
+* Patch by Pierre Aubert , 28 Nov 2002
+ Add support for external (SIU) interrupts on MPC8xx
- Fix ECC setup bug.
- Enable 1T/2T based on number of DIMMs present.
+* Patch by Pierre Aubert , 28 Nov 2002
+ Fix nested syscalls bug in standalone applications
- Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+* Patch by David Müller, 27 Nov 2002:
+ fix output of "pciinfo" command for CardBus bridge devices.
-commit d11fec5015334deb2010e36ce00bb118cc5429a5
-Author: Haiying Wang <Haiying.Wang@freescale.com>
-Date: Fri May 26 10:24:48 2006 -0500
+* Fix bug in TQM8260 board detection - boards got stuck when board ID
+ was not readable
- Add first draft of the MPC8641HPCN doc/README.
+* Add LED indication for IDE activity on KUP4K board
- Signed-off-by: Jon Loeliger <jdl@jdl.com>
+* Fix startup problems with VFD display on TRAB
-commit ed45d6c930b5939718a87ee12e25cf9a05978d4a
-Author: Haiying Wang <Haiying.Wang@freescale.com>
-Date: Fri May 26 10:13:04 2006 -0500
+* Patch by Pierre Aubert, 20 Nov 2002
+ Add driver for Epson SED13806 graphic controller.
+ Add support for BMP logos in cfb_console driver.
- Added pci@8000 block.
- Updated ethernet interrupt mappings (moved up 48).
- Cleaned up a few comments.
+* Added support for both PCMCIA slots (at the same time!) on MPC8xx
- Signed-off-by: Jon Loeliger <jdl@jdl.com>
+* Patch by Rod Boyce, 21 Nov 2002:
+ fix PCMCIA on MBX8xx board
-commit 3033ebb20fd7c372c7bca3c9955a4692bb2240b7
-Author: Haiying Wang <Haiying.Wang@freescale.com>
-Date: Fri May 26 10:01:16 2006 -0500
+* Patch by Pierre Aubert , 21 Nov 2002
+ Add CFG_CPM_POST_WORD_ADDR to make the offset of the
+ bootmode word in DPRAM configurable
- Allow args on reset command.
+* Patch by Daniel Engström, 18 Nov 2002:
+ Fixes for x86 port (mostly strings issues)
- Signed-off-by: Jon Loeliger <jdl@jdl.com>
+* Patch by Ken Chou, 18 Nov 2002:
+ Fix for natsemi NIC cards (DP83815)
-commit 14e37081ff3cac7ebe6e93836523429853b6b292
-Author: Jon Loeliger <jdl@jdl.com>
-Date: Fri May 19 13:28:39 2006 -0500
+* Patch by Pierre Aubert, 19 Nov 2002:
+ fix a bug for the MII configuration, and some warnings
- Change arbitration to round-robin for SMP linux.
+* Patch by Thomas Frieden, 13 Nov 2002:
+ Add code for AmigaOne board
+ (preliminary merge to U-Boot, still WIP)
-commit 9a655876e5995be80f49054e2509500e871e4d3a
-Author: Jon Loeliger <jdl@jdl.com>
-Date: Fri May 19 13:26:34 2006 -0500
+* Patch by Jon Diekema, 12 Nov 2002:
+ - Adding URL for IEEE OUI lookup
+ - Making the autoboot #defines dependent on CONFIG_AUTOBOOT_KEYED
+ being defined.
+ - In the CONFIG_EXTRA_ENV_SETTINGS #define, the root-on-initrd and
+ root-on-nfs macros are designed to switch how the default boot
+ method gets defined.
- Enable dual DDR controllers and interleaving.
+* Patch by Daniel Engström, 13 Nov 2002:
+ Add support for i386 architecture and AMD SC520 board
-commit 586d1d5abd3e525f1e1d9b81e5a61a4da6b2fa3c
-Author: Jon Loeliger <jdl@jdl.com>
-Date: Fri May 19 13:22:44 2006 -0500
+* Patch by Pierre Aubert, 12 Nov 2002:
+ Add support for DOS filesystem and booting from DOS floppy disk
- Update 86xx address map and LAWBARs.
+* Patch by Jim Sandoz, 07 Nov 2002:
+ Increase number of network RX buffers (PKTBUFSRX in
+ "include/net.h") for EEPRO100 based boards (especially SP8240)
+ which showed "Receiver is not ready" errors when U-Boot was
+ processing the receive buffers slower than the network controller
+ was filling them.
-commit cccce5d0581bb0ba4602799a4b5112e58d1579cb
-Author: Jon Loeliger <jdl@jdl.com>
-Date: Fri May 19 13:14:15 2006 -0500
+* Patch by Andreas Oberritter, 09 Nov 2002:
+ Change behaviour of NetLoop(): return -1 for errors, filesize
+ otherwise; return code 0 is valid an means no file loaded - in this
+ case the environment still gets updated!
- Remove L2 Cache invalidate polling.
+* Patches by Jon Diekema, 9 Nov 2002:
+ - improve ADC/DAC clocking on the SACSng board to align
+ the failing edges of LRCLK and SCLK
+ - sbc8260 configuration tweaks
+ - add status LED support for 82xx systems
+ - wire sspi/sspo commands into command handler; improved error
+ handlering
+ - add timestamp support and alternate memory test to the
+ SACSng configuration
-commit f35ec68fb066cec0e36294bfe07dec2d4e8ad3a8
-Author: Jon Loeliger <jdl@jdl.com>
-Date: Fri May 19 12:33:09 2006 -0500
+* Patch by Vince Husovsky, 7 Nov 2002:
+ Add "-n" to linker options to get rid of "Not enough room for
+ program headers" problem
- Enable 2nd CPU and I2C.
+* Patch by David Müller, 05 Nov 2002
+ Rename CONFIG_PLL_INPUT_FREQ to CONFIG_SYS_CLK_FREQ
+ so we can use an already existing name
-commit bf690dcb512d34c4fceec0eb1e5c0e88a9db5d54
-Author: Jon Loeliger <jdl@freescale.com>
-Date: Mon May 15 07:26:56 2006 -0500
+* Patch by Pierre Aubert, 05 Nov 2002
+ Hardware relatied improvments in FDC boot code
- Update interrupt mapping.
+* Patch by Holger Schurig, 5 Nov 2002:
+ Make the PXA really change it's frequency
-commit 6cfea33477b04b63ed47386ed1629529484c33ba
-Author: Haiying Wang <Haiying.Wang@freescale.com>
-Date: Wed May 10 09:38:06 2006 -0500
+* Patch by Pierre Aubert, 05 Nov 2002
+ Add support for slave serial Spartan 2 FPGAs
- Remove unneeded INIT_RAM_LOCK cache twiddling.
- Correctly tracks r29 as global data pointer now.
+* Fix uninitialized memory (MAC address) in 8xx SCC/FEC ethernet
+ drivers
- Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+* Add support for log buffer which can be passed to Linux kernel's
+ syslog mechanism; used especially for POST results.
-commit d4dd317b58c126a2a7e73f4764ecc1a7c97f876c
-Author: Jon Loeliger <jdl@freescale.com>
-Date: Wed May 10 09:33:07 2006 -0500
+* Patch by Klaus Heydeck, 31 Oct 2002:
+ Add initial support for kup4k board
- Remove unnecessary flash.c file.
+* Patch by Robert Schwebel, 04 Nov 2002:
+ - use watchdog to reset PXA250 systems
+ - added progress callbacks to (some of the) ARM code
+ - update for Cogent CSB226 board
-commit 18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8
-Author: Jon Loeliger <jdl@freescale.com>
-Date: Tue May 9 08:23:49 2006 -0500
+* Add support for FPS860 board
- Get MPC8641HPCN flash images working.
+* Patch by Guillaume Alexandre,, 04 Nov 2002:
+ Improve PCI access on 32-bits Compact PCI bus
- Enable the CFI driver.
- Remove bogus LAWBAR7 cruft.
- Use correct TEXT_BASE, Fixup load script.
- Enable SPD EEPROM during DDR setup.
- Use generic RFC 1918 IP addresses by default.
+* Fix mdelay() on TRAB - this was still the debugging version with
+ seconds instead of ms.
-commit 5c9efb36a6b5431423f52888a0e3b4b515fe7eca
-Author: Jon Loeliger <jdl@freescale.com>
-Date: Thu Apr 27 10:15:16 2006 -0500
+* Patch by Robert Schwebel, 1 Nov 2002:
+ XScale related cleanup (affects all ARM boards)
- Cleanup whitespaces and style issues.
- Removed //-style comments.
- Use 80-column lines.
- Remove trailing whitespace.
- Remove dead code and debug cruft.
+* Cleanup of names and README.
-commit a2320a6bf8113a09544c42d160d10ac69d049a03
-Author: Jon Loeliger <jdl@freescale.com>
-Date: Thu Apr 27 08:22:39 2006 -0500
+======================================================================
+Notes for U-Boot 0.1.0:
+======================================================================
- Revert bad PCI prefetch limit change.
+This is the initial version of "Das U-Boot", the Universal Boot Loader.
-commit debb7354d1ea4f694154818df5e5b523f5c1cc1d
-Author: Jon Loeliger <jdl@freescale.com>
-Date: Wed Apr 26 17:58:56 2006 -0500
+It is based on version 2.0.0 (the "Halloween Release") of PPCBoot.
+For information about the history of the project please see the
+PPCBoot project page at http://sourceforge.net/projects/ppcboot
- Initial support for MPC8641 HPCN board.
+======================================================================
diff --git a/MAINTAINERS b/MAINTAINERS
index 8bb38b5..d453967 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -281,6 +281,7 @@ Stefan Roese <sr@denx.de>
TQM85xx MPC8540/8541/8555/8560
+ alpr PPC440GX
bamboo PPC440EP
bunbinga PPC405EP
ebony PPC440GP
diff --git a/MAKEALL b/MAKEALL
index 879a17f..84a708a 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -74,21 +74,21 @@ LIST_8xx=" \
#########################################################################
LIST_4xx=" \
- ADCIOP AP1000 AR405 ASH405 \
- bamboo bubinga CANBT CMS700 \
- CPCI2DP CPCI405 CPCI4052 CPCI405AB \
- CPCI405DT CPCI440 CPCIISER4 CRAYL1 \
- csb272 csb472 DASA_SIM DP405 \
- DU405 ebony ERIC EXBITGEN \
- G2000 HH405 HUB405 JSE \
- KAREF luan METROBOX MIP405 \
- MIP405T ML2 ml300 ocotea \
- OCRTC ORSG p3p440 PCI405 \
- pcs440ep PIP405 PLU405 PMC405 \
- PPChameleonEVB sbc405 sequoia sequoia_nand \
- VOH405 VOM405 W7OLMC W7OLMG \
- walnut WUH405 XPEDITE1K yellowstone \
- yosemite yucca bamboo \
+ ADCIOP alpr AP1000 AR405 \
+ ASH405 bamboo bubinga CANBT \
+ CMS700 CPCI2DP CPCI405 CPCI4052 \
+ CPCI405AB CPCI405DT CPCI440 CPCIISER4 \
+ CRAYL1 csb272 csb472 DASA_SIM \
+ DP405 DU405 ebony ERIC \
+ EXBITGEN G2000 HH405 HUB405 \
+ JSE KAREF luan METROBOX \
+ MIP405 MIP405T ML2 ml300 \
+ ocotea OCRTC ORSG p3p440 \
+ PCI405 pcs440ep PIP405 PLU405 \
+ PMC405 PPChameleonEVB sbc405 sequoia \
+ sequoia_nand VOH405 VOM405 W7OLMC \
+ W7OLMG walnut WUH405 XPEDITE1K \
+ yellowstone yosemite yucca \
"
#########################################################################
diff --git a/Makefile b/Makefile
index 5316504..37d782d 100644
--- a/Makefile
+++ b/Makefile
@@ -984,6 +984,9 @@ xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(
ADCIOP_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd
+alpr_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx alpr prodrive
+
AP1000_config:unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx ap1000 amirix
diff --git a/board/amcc/yellowstone/yellowstone.c b/board/amcc/yellowstone/yellowstone.c
index 92dc9d4..754ae44 100644
--- a/board/amcc/yellowstone/yellowstone.c
+++ b/board/amcc/yellowstone/yellowstone.c
@@ -552,3 +552,9 @@ void hw_watchdog_reset(void)
}
#endif
+
+void board_reset(void)
+{
+ /* give reset to BCSR */
+ *(unsigned char *)(CFG_BCSR_BASE | 0x06) = 0x09;
+}
diff --git a/board/amcc/yosemite/yosemite.c b/board/amcc/yosemite/yosemite.c
index 7f2e718..588ee90 100644
--- a/board/amcc/yosemite/yosemite.c
+++ b/board/amcc/yosemite/yosemite.c
@@ -548,3 +548,9 @@ void hw_watchdog_reset(void)
}
#endif
+
+void board_reset(void)
+{
+ /* give reset to BCSR */
+ *(unsigned char *)(CFG_BCSR_BASE | 0x06) = 0x09;
+}
diff --git a/board/prodrive/alpr/Makefile b/board/prodrive/alpr/Makefile
new file mode 100644
index 0000000..1024a41
--- /dev/null
+++ b/board/prodrive/alpr/Makefile
@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS = $(BOARD).o flash.o fpga.o nand.o
+SOBJS = init.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend *~
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/prodrive/alpr/alpr.c b/board/prodrive/alpr/alpr.c
new file mode 100644
index 0000000..e8435bf
--- /dev/null
+++ b/board/prodrive/alpr/alpr.c
@@ -0,0 +1,284 @@
+/*
+ * (C) Copyright 2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <common.h>
+#include <asm/processor.h>
+#include <spd_sdram.h>
+#include <ppc4xx_enet.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern int alpr_fpga_init(void);
+
+int board_early_init_f (void)
+{
+ unsigned long mfr;
+
+ /*-------------------------------------------------------------------------+
+ | Initialize EBC CONFIG
+ +-------------------------------------------------------------------------*/
+#if 0
+ mtebc(xbcfg, EBC_CFG_LE_UNLOCK |
+ EBC_CFG_PTD_ENABLE | EBC_CFG_RTC_64PERCLK |
+ EBC_CFG_ATC_PREVIOUS | EBC_CFG_DTC_PREVIOUS |
+ EBC_CFG_CTC_PREVIOUS | EBC_CFG_EMC_NONDEFAULT |
+ EBC_CFG_PME_DISABLE | EBC_CFG_PR_32);
+#else
+ mtebc(xbcfg, EBC_CFG_LE_UNLOCK |
+ EBC_CFG_PTD_DISABLE | EBC_CFG_RTC_64PERCLK |
+ EBC_CFG_ATC_PREVIOUS | EBC_CFG_DTC_PREVIOUS |
+ EBC_CFG_CTC_PREVIOUS | EBC_CFG_EMC_NONDEFAULT |
+ EBC_CFG_PME_DISABLE | EBC_CFG_PR_32);
+#endif
+
+ /*--------------------------------------------------------------------
+ * Setup the interrupt controller polarities, triggers, etc.
+ *-------------------------------------------------------------------*/
+ mtdcr (uic0sr, 0xffffffff); /* clear all */
+ mtdcr (uic0er, 0x00000000); /* disable all */
+ mtdcr (uic0cr, 0x00000009); /* SMI & UIC1 crit are critical */
+ mtdcr (uic0pr, 0xfffffe13); /* per ref-board manual */
+ mtdcr (uic0tr, 0x01c00008); /* per ref-board manual */
+ mtdcr (uic0vr, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (uic0sr, 0xffffffff); /* clear all */
+
+ mtdcr (uic1sr, 0xffffffff); /* clear all */
+ mtdcr (uic1er, 0x00000000); /* disable all */
+ mtdcr (uic1cr, 0x00000000); /* all non-critical */
+ mtdcr (uic1pr, 0xffffe0ff); /* per ref-board manual */
+ mtdcr (uic1tr, 0x00ffc000); /* per ref-board manual */
+ mtdcr (uic1vr, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (uic1sr, 0xffffffff); /* clear all */
+
+ mtdcr (uic2sr, 0xffffffff); /* clear all */
+ mtdcr (uic2er, 0x00000000); /* disable all */
+ mtdcr (uic2cr, 0x00000000); /* all non-critical */
+ mtdcr (uic2pr, 0xffffffff); /* per ref-board manual */
+ mtdcr (uic2tr, 0x00ff8c0f); /* per ref-board manual */
+ mtdcr (uic2vr, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (uic2sr, 0xffffffff); /* clear all */
+
+ mtdcr (uicb0sr, 0xfc000000); /* clear all */
+ mtdcr (uicb0er, 0x00000000); /* disable all */
+ mtdcr (uicb0cr, 0x00000000); /* all non-critical */
+ mtdcr (uicb0pr, 0xfc000000); /* */
+ mtdcr (uicb0tr, 0x00000000); /* */
+ mtdcr (uicb0vr, 0x00000001); /* */
+ mfsdr (sdr_mfr, mfr);
+ mfr &= ~SDR0_MFR_ECS_MASK;
+
+ return 0;
+}
+
+int checkboard (void)
+{
+ char *s = getenv ("serial#");
+
+ printf ("Board: ALPR");
+ if (s != NULL) {
+ puts (", serial# ");
+ puts (s);
+ }
+ putc ('\n');
+
+ return (0);
+}
+
+#if defined(CFG_DRAM_TEST)
+int testdram (void)
+{
+ uint *pstart = (uint *) 0x00000000;
+ uint *pend = (uint *) 0x08000000;
+ uint *p;
+
+ for (p = pstart; p < pend; p++)
+ *p = 0xaaaaaaaa;
+
+ for (p = pstart; p < pend; p++) {
+ if (*p != 0xaaaaaaaa) {
+ printf ("SDRAM test fails at: %08x\n", (uint) p);
+ return 1;
+ }
+ }
+
+ for (p = pstart; p < pend; p++)
+ *p = 0x55555555;
+
+ for (p = pstart; p < pend; p++) {
+ if (*p != 0x55555555) {
+ printf ("SDRAM test fails at: %08x\n", (uint) p);
+ return 1;
+ }
+ }
+ return 0;
+}
+#endif
+
+/*************************************************************************
+ * pci_pre_init
+ *
+ * This routine is called just prior to registering the hose and gives
+ * the board the opportunity to check things. Returning a value of zero
+ * indicates that things are bad & PCI initialization should be aborted.
+ *
+ * Different boards may wish to customize the pci controller structure
+ * (add regions, override default access routines, etc) or perform
+ * certain pre-initialization actions.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+int pci_pre_init(struct pci_controller * hose )
+{
+ unsigned long strap;
+
+ /*--------------------------------------------------------------------------+
+ * The ocotea board is always configured as the host & requires the
+ * PCI arbiter to be enabled.
+ *--------------------------------------------------------------------------*/
+ mfsdr(sdr_sdstp1, strap);
+ if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ){
+ printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap);
+ return 0;
+ }
+
+ /* FPGA Init */
+ alpr_fpga_init ();
+
+ return 1;
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+
+/*************************************************************************
+ * pci_target_init
+ *
+ * The bootstrap configuration provides default settings for the pci
+ * inbound map (PIM). But the bootstrap config choices are limited and
+ * may not be sufficient for a given board.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+void pci_target_init(struct pci_controller * hose )
+{
+ /*--------------------------------------------------------------------------+
+ * Disable everything
+ *--------------------------------------------------------------------------*/
+ out32r( PCIX0_PIM0SA, 0 ); /* disable */
+ out32r( PCIX0_PIM1SA, 0 ); /* disable */
+ out32r( PCIX0_PIM2SA, 0 ); /* disable */
+ out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */
+
+ /*--------------------------------------------------------------------------+
+ * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
+ * options to not support sizes such as 128/256 MB.
+ *--------------------------------------------------------------------------*/
+ out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE );
+ out32r( PCIX0_PIM0LAH, 0 );
+ out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
+
+ out32r( PCIX0_BAR0, 0 );
+
+ /*--------------------------------------------------------------------------+
+ * Program the board's subsystem id/vendor id
+ *--------------------------------------------------------------------------*/
+ out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID );
+ out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID );
+
+ out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+
+/*************************************************************************
+ * is_pci_host
+ *
+ * This routine is called to determine if a pci scan should be
+ * performed. With various hardware environments (especially cPCI and
+ * PPMC) it's insufficient to depend on the state of the arbiter enable
+ * bit in the strap register, or generic host/adapter assumptions.
+ *
+ * Rather than hard-code a bad assumption in the general 440 code, the
+ * 440 pci code requires the board to decide at runtime.
+ *
+ * Return 0 for adapter mode, non-zero for host (monarch) mode.
+ *
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI)
+int is_pci_host(struct pci_controller *hose)
+{
+ /* The ocotea board is always configured as host. */
+ return(1);
+}
+#endif /* defined(CONFIG_PCI) */
+
+/*************************************************************************
+ * pci_master_init
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
+void pci_master_init(struct pci_controller *hose)
+{
+ /*--------------------------------------------------------------------------+
+ | PowerPC440 PCI Master configuration.
+ | Map PLB/processor addresses to PCI memory space.
+ | PLB address 0xA0000000-0xCFFFFFFF ==> PCI address 0x80000000-0xCFFFFFFF
+ | Use byte reversed out routines to handle endianess.
+ | Make this region non-prefetchable.
+ +--------------------------------------------------------------------------*/
+ out32r( PCIX0_POM0SA, 0 ); /* disable */
+ out32r( PCIX0_POM1SA, 0 ); /* disable */
+ out32r( PCIX0_POM2SA, 0 ); /* disable */
+
+ out32r(PCIX0_POM0LAL, CFG_PCI_MEMBASE); /* PMM0 Local Address */
+ out32r(PCIX0_POM0LAH, 0x00000003); /* PMM0 Local Address */
+ out32r(PCIX0_POM0PCIAL, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */
+ out32r(PCIX0_POM0PCIAH, 0x00000000); /* PMM0 PCI High Address */
+ out32r(PCIX0_POM0SA, ~(0x10000000 - 1) | 1); /* 256MB + enable region */
+
+ out32r(PCIX0_POM1LAL, CFG_PCI_MEMBASE2); /* PMM0 Local Address */
+ out32r(PCIX0_POM1LAH, 0x00000003); /* PMM0 Local Address */
+ out32r(PCIX0_POM1PCIAL, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */
+ out32r(PCIX0_POM1PCIAH, 0x00000000); /* PMM0 PCI High Address */
+ out32r(PCIX0_POM1SA, ~(0x10000000 - 1) | 1); /* 256MB + enable region */
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
+
+#ifdef CONFIG_POST
+/*
+ * Returns 1 if keys pressed to start the power-on long-running tests
+ * Called from board_init_f().
+ */
+int post_hotkeys_pressed(void)
+{
+
+ return (ctrlc());
+}
+#endif
+
+void board_reset(void)
+{
+ /*
+ * Initiate chip reset in debug control register DBCR
+ */
+ mtspr(dbcr0, 0x20000000);
+}
diff --git a/board/prodrive/alpr/config.mk b/board/prodrive/alpr/config.mk
new file mode 100644
index 0000000..9e18335
--- /dev/null
+++ b/board/prodrive/alpr/config.mk
@@ -0,0 +1,44 @@
+#
+# (C) Copyright 2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# AMCC 440GX Reference Platform (Ocotea) board
+#
+
+#TEXT_BASE = 0xFFFE0000
+
+ifeq ($(ramsym),1)
+TEXT_BASE = 0x07FD0000
+else
+TEXT_BASE = 0xFFFC0000
+endif
+
+PLATFORM_CPPFLAGS += -DCONFIG_440=1
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
+
+ifeq ($(dbcr),1)
+PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+endif
diff --git a/board/prodrive/alpr/flash.c b/board/prodrive/alpr/flash.c
new file mode 100644
index 0000000..8fa0084
--- /dev/null
+++ b/board/prodrive/alpr/flash.c
@@ -0,0 +1,70 @@
+/*
+ * (C) Copyright 2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+/*
+ * include common flash code (for esd boards)
+ */
+#include "../common/flash.c"
+
+/*
+ * Prototypes
+ */
+static ulong flash_get_size (vu_long * addr, flash_info_t * info);
+
+unsigned long flash_init(void)
+{
+ unsigned long size;
+ int i;
+
+ /* Init: no FLASHes known */
+ for (i=0; i<CFG_MAX_FLASH_BANKS; i++)
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+
+ size = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
+
+ if (flash_info[0].flash_id == FLASH_UNKNOWN)
+ printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+ size, size<<20);
+
+ /* Monitor protection ON by default */
+ flash_protect(FLAG_PROTECT_SET, -CFG_MONITOR_LEN, 0xffffffff,
+ &flash_info[0]);
+
+ /* Environment protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+ &flash_info[CFG_MAX_FLASH_BANKS - 1]);
+
+ /* Redundant environment protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_ENV_ADDR_REDUND,
+ CFG_ENV_ADDR_REDUND + CFG_ENV_SIZE_REDUND - 1,
+ &flash_info[CFG_MAX_FLASH_BANKS - 1]);
+
+ flash_info[0].size = size;
+
+ return size;
+}
diff --git a/board/prodrive/alpr/fpga.c b/board/prodrive/alpr/fpga.c
new file mode 100644
index 0000000..78307b4
--- /dev/null
+++ b/board/prodrive/alpr/fpga.c
@@ -0,0 +1,264 @@
+/*
+ * (C) Copyright 2006
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+/*
+ * Altera FPGA configuration support for the ALPR computer from prodrive
+ */
+
+#include <common.h>
+#include <altera.h>
+#include <ACEX1K.h>
+#include <command.h>
+#include <asm-ppc/processor.h>
+#include <ppc440.h>
+#include "fpga.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if (CONFIG_FPGA)
+
+#ifdef FPGA_DEBUG
+#define PRINTF(fmt,args...) printf (fmt ,##args)
+#else
+#define PRINTF(fmt,args...)
+#endif
+
+static unsigned long regval;
+
+#define SET_GPIO_REG_0(reg, bit) {\
+ regval = in32(reg);\
+ regval &= ~(0x80000000 >> bit);\
+ out32(reg, regval);\
+ }
+
+#define SET_GPIO_REG_1(reg, bit) {\
+ regval = in32(reg);\
+ regval |= (0x80000000 >> bit);\
+ out32(reg, regval);\
+ }
+
+#define GPIO_CLK_PIN 0x00002000
+#define GPIO_CLK_PIN_I 0xffffdfff
+#define GPIO_DAT_PIN 0x00001000
+#define GPIO_DAT_PIN_I 0xffffefff
+#define GPIO_CLKDAT_PIN_I 0xffffcfff
+
+#define SET_GPIO_CLK_0 out32(GPIO0_OR, in32(GPIO0_OR) & GPIO_CLK_PIN_I);
+#define SET_GPIO_CLK_1 out32(GPIO0_OR, in32(GPIO0_OR) | GPIO_CLK_PIN);
+#define SET_GPIO_DAT_0 out32(GPIO0_OR, in32(GPIO0_OR) & GPIO_DAT_PIN_I);
+#define SET_GPIO_DAT_1 out32(GPIO0_OR, in32(GPIO0_OR) | GPIO_DAT_PIN);
+
+#define SET_GPIO_0(bit) SET_GPIO_REG_0(GPIO0_OR, bit)
+#define SET_GPIO_1(bit) SET_GPIO_REG_1(GPIO0_OR, bit)
+
+#define SET_GPIO_CLK_0_Z1 out32(GPIO0_OR, (in32(GPIO0_OR) & GPIO_CLK_PIN_I) | GPIO_DAT_PIN);
+#define SET_GPIO_CLK_0_Z0 out32(GPIO0_OR, in32(GPIO0_OR) & GPIO_CLKDAT_PIN_I);
+
+#define FPGA_WRITE_1 { \
+ SET_GPIO_CLK_0_Z1\
+ SET_GPIO_CLK_1}
+
+#define FPGA_WRITE_0 { \
+ SET_GPIO_CLK_0_Z0\
+ SET_GPIO_CLK_1}
+
+#define P_GP(reg) (reg & 0x00023f00)
+
+/* Plattforminitializations */
+/* Here we have to set the FPGA Chain */
+/* PROGRAM_PROG_EN = HIGH */
+/* PROGRAM_SEL_DPR = LOW */
+int fpga_pre_fn (int cookie)
+{
+ unsigned long reg;
+
+ reg = in32(GPIO0_IR);
+ /* Enable the FPGA Chain */
+ SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_PROG_EN);
+ SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_PROG_EN);
+ SET_GPIO_1(CFG_GPIO_PROG_EN);
+ SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_SEL_DPR);
+ SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_SEL_DPR);
+ SET_GPIO_0((CFG_GPIO_SEL_DPR));
+
+ /* initialize the GPIO Pins */
+ /* output */
+ SET_GPIO_0(CFG_GPIO_CLK);
+ SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_CLK);
+ SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_CLK);
+
+ /* output */
+ SET_GPIO_0(CFG_GPIO_DATA);
+ SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_DATA);
+ SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_DATA);
+
+ /* First we set STATUS to 0 then as an input */
+ SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_STATUS);
+ SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_STATUS);
+ SET_GPIO_0(CFG_GPIO_STATUS);
+ SET_GPIO_REG_0(GPIO0_TCR, CFG_GPIO_STATUS);
+ SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_STATUS);
+
+ /* output */
+ SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_CONFIG);
+ SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_CONFIG);
+ SET_GPIO_0(CFG_GPIO_CONFIG);
+
+ /* input */
+ SET_GPIO_0(CFG_GPIO_CON_DON);
+ SET_GPIO_REG_0(GPIO0_TCR, CFG_GPIO_CON_DON);
+ SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_CON_DON);
+
+ /* CONFIG = 0 STATUS = 0 -> FPGA in reset state */
+ SET_GPIO_0(CFG_GPIO_CONFIG);
+ return FPGA_SUCCESS;
+}
+
+/* Set the state of CONFIG Pin */
+int fpga_config_fn (int assert_config, int flush, int cookie)
+{
+ if (assert_config) {
+ SET_GPIO_1(CFG_GPIO_CONFIG);
+ } else {
+ SET_GPIO_0(CFG_GPIO_CONFIG);
+ }
+ return FPGA_SUCCESS;
+}
+
+/* Returns the state of STATUS Pin */
+int fpga_status_fn (int cookie)
+{
+ unsigned long reg;
+
+ reg = in32(GPIO0_IR);
+ if (reg &= (0x80000000 >> CFG_GPIO_STATUS)) {
+ PRINTF("STATUS = HIGH\n");
+ return FPGA_FAIL;
+ }
+ PRINTF("STATUS = LOW\n");
+ return FPGA_SUCCESS;
+}
+
+/* Returns the state of CONF_DONE Pin */
+int fpga_done_fn (int cookie)
+{
+ unsigned long reg;
+ reg = in32(GPIO0_IR);
+ if (reg &= (0x80000000 >> CFG_GPIO_CON_DON)) {
+ PRINTF("CONF_DON = HIGH\n");
+ return FPGA_FAIL;
+ }
+ PRINTF("CONF_DON = LOW\n");
+ return FPGA_SUCCESS;
+}
+
+/* writes the complete buffer to the FPGA
+ writing the complete buffer in one function is very faster,
+ then calling it for every bit */
+int fpga_write_fn (void *buf, size_t len, int flush, int cookie)
+{
+ size_t bytecount = 0;
+ unsigned char *data = (unsigned char *) buf;
+ unsigned char val=0;
+ int i;
+
+ while (bytecount < len) {
+#ifdef CFG_FPGA_CHECK_CTRLC
+ if (ctrlc ()) {
+ return FPGA_FAIL;
+ }
+#endif
+ val = data[bytecount ++ ];
+ i = 8;
+ do {
+ if (val & 0x01) {
+ FPGA_WRITE_1;
+ } else {
+ FPGA_WRITE_0;
+ }
+ val >>= 1;
+ i --;
+ } while (i > 0);
+
+#ifdef CFG_FPGA_PROG_FEEDBACK
+ if (bytecount % (len / 40) == 0)
+ putc ('.'); /* let them know we are alive */
+#endif
+ }
+ return FPGA_SUCCESS;
+}
+
+/* called, when programming is aborted */
+int fpga_abort_fn (int cookie)
+{
+ SET_GPIO_1((CFG_GPIO_SEL_DPR));
+ return FPGA_SUCCESS;
+}
+
+/* called, when programming was succesful */
+int fpga_post_fn (int cookie)
+{
+ return fpga_abort_fn (cookie);
+}
+
+/* Note that these are pointers to code that is in Flash. They will be
+ * relocated at runtime.
+ */
+Altera_CYC2_Passive_Serial_fns fpga_fns = {
+ fpga_pre_fn,
+ fpga_config_fn,
+ fpga_status_fn,
+ fpga_done_fn,
+ fpga_write_fn,
+ fpga_abort_fn,
+ fpga_post_fn
+};
+
+Altera_desc fpga[CONFIG_FPGA_COUNT] = {
+ {Altera_CYC2,
+ passive_serial,
+ Altera_EP2C35_SIZE,
+ (void *) &fpga_fns,
+ NULL,
+ 0}
+};
+
+/*
+ * Initialize the fpga. Return 1 on success, 0 on failure.
+ */
+int alpr_fpga_init (void)
+{
+ int i;
+
+ PRINTF ("%s:%d: Initialize FPGA interface (relocation offset = 0x%.8lx)\n", __FUNCTION__, __LINE__, gd->reloc_off);
+ fpga_init (gd->reloc_off);
+
+ for (i = 0; i < CONFIG_FPGA_COUNT; i++) {
+ PRINTF ("%s:%d: Adding fpga %d\n", __FUNCTION__, __LINE__, i);
+ fpga_add (fpga_altera, &fpga[i]);
+ }
+ return 1;
+}
+
+#endif
diff --git a/board/prodrive/alpr/init.S b/board/prodrive/alpr/init.S
new file mode 100644
index 0000000..1baa609
--- /dev/null
+++ b/board/prodrive/alpr/init.S
@@ -0,0 +1,104 @@
+/*
+ * (C) Copyright 2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <ppc_asm.tmpl>
+#include <config.h>
+
+/* General */
+#define TLB_VALID 0x00000200
+
+/* Supported page sizes */
+#define SZ_1K 0x00000000
+#define SZ_4K 0x00000010
+#define SZ_16K 0x00000020
+#define SZ_64K 0x00000030
+#define SZ_256K 0x00000040
+#define SZ_1M 0x00000050
+#define SZ_8M 0x00000060
+#define SZ_16M 0x00000070
+#define SZ_256M 0x00000090
+
+/* Storage attributes */
+#define SA_W 0x00000800 /* Write-through */
+#define SA_I 0x00000400 /* Caching inhibited */
+#define SA_M 0x00000200 /* Memory coherence */
+#define SA_G 0x00000100 /* Guarded */
+#define SA_E 0x00000080 /* Endian */
+
+/* Access control */
+#define AC_X 0x00000024 /* Execute */
+#define AC_W 0x00000012 /* Write */
+#define AC_R 0x00000009 /* Read */
+
+/* Some handy macros */
+
+#define EPN(e) ((e) & 0xfffffc00)
+#define TLB0(epn,sz) ( (EPN((epn)) | (sz) | TLB_VALID ) )
+#define TLB1(rpn,erpn) ( ((rpn)&0xfffffc00) | (erpn) )
+#define TLB2(a) ( (a)&0x00000fbf )
+
+#define tlbtab_start\
+ mflr r1 ;\
+ bl 0f ;
+
+#define tlbtab_end\
+ .long 0, 0, 0 ; \
+0: mflr r0 ; \
+ mtlr r1 ; \
+ blr ;
+
+#define tlbentry(epn,sz,rpn,erpn,attr)\
+ .long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
+
+
+/**************************************************************************
+ * TLB TABLE
+ *
+ * This table is used by the cpu boot code to setup the initial tlb
+ * entries. Rather than make broad assumptions in the cpu source tree,
+ * this table lets each board set things up however they like.
+ *
+ * Pointer to the table is returned in r1
+ *
+ *************************************************************************/
+
+ .section .bootpg,"ax"
+ .globl tlbtab
+
+tlbtab:
+ tlbtab_start
+ tlbentry( 0xff000000, SZ_16M, 0xff000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+ tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CFG_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X )
+ tlbentry( CFG_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X )
+ tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+ tlbentry( CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I )
+
+ /* PCI */
+ tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 3, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 3, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 3, AC_R|AC_W|SA_G|SA_I )
+
+ /* NAND */
+ tlbentry( CFG_NAND_BASE, SZ_4K, CFG_NAND_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+ tlbtab_end
diff --git a/board/prodrive/alpr/nand.c b/board/prodrive/alpr/nand.c
new file mode 100644
index 0000000..20a8098
--- /dev/null
+++ b/board/prodrive/alpr/nand.c
@@ -0,0 +1,173 @@
+/*
+ * (C) Copyright 2006
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de
+ *
+ * (C) Copyright 2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+
+#include <asm/processor.h>
+#include <nand.h>
+
+struct alpr_ndfc_regs {
+ u16 cmd[4];
+ u16 addr_wait;
+ u16 term;
+ u16 dummy;
+ u16 dummy2;
+ u16 data;
+};
+
+static u8 hwctl;
+static struct alpr_ndfc_regs *alpr_ndfc = NULL;
+
+#define readb(addr) (u8)(*(volatile u16 *)(addr))
+#define writeb(d,addr) *(volatile u16 *)(addr) = ((u16)(d))
+
+/*
+ * The ALPR has a NAND Flash Controller (NDFC) that handles all accesses to
+ * the NAND devices. The NDFC has command, address and data registers that
+ * when accessed will set up the NAND flash pins appropriately. We'll use the
+ * hwcontrol function to save the configuration in a global variable.
+ * We can then use this information in the read and write functions to
+ * determine which NDFC register to access.
+ *
+ * There are 2 NAND devices on the board, a Hynix HY27US08561A (1 GByte).
+ */
+static void alpr_nand_hwcontrol(struct mtd_info *mtd, int cmd)
+{
+ switch (cmd) {
+ case NAND_CTL_SETCLE:
+ hwctl |= 0x1;
+ break;
+ case NAND_CTL_CLRCLE:
+ hwctl &= ~0x1;
+ break;
+ case NAND_CTL_SETALE:
+ hwctl |= 0x2;
+ break;
+ case NAND_CTL_CLRALE:
+ hwctl &= ~0x2;
+ break;
+ case NAND_CTL_SETNCE:
+ break;
+ case NAND_CTL_CLRNCE:
+ writeb(0x00, &(alpr_ndfc->term));
+ break;
+ }
+}
+
+static void alpr_nand_write_byte(struct mtd_info *mtd, u_char byte)
+{
+ struct nand_chip *nand = mtd->priv;
+
+ if (hwctl & 0x1)
+ /*
+ * IO_ADDR_W used as CMD[i] reg to support multiple NAND
+ * chips.
+ */
+ writeb(byte, nand->IO_ADDR_W);
+ else if (hwctl & 0x2) {
+ writeb(byte, &(alpr_ndfc->addr_wait));
+ } else
+ writeb(byte, &(alpr_ndfc->data));
+}
+
+static u_char alpr_nand_read_byte(struct mtd_info *mtd)
+{
+ return readb(&(alpr_ndfc->data));
+}
+
+static void alpr_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+ struct nand_chip *nand = mtd->priv;
+ int i;
+
+ for (i = 0; i < len; i++) {
+ if (hwctl & 0x1)
+ /*
+ * IO_ADDR_W used as CMD[i] reg to support multiple NAND
+ * chips.
+ */
+ writeb(buf[i], nand->IO_ADDR_W);
+ else if (hwctl & 0x2)
+ writeb(buf[i], &(alpr_ndfc->addr_wait));
+ else
+ writeb(buf[i], &(alpr_ndfc->data));
+ }
+}
+
+static void alpr_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+ int i;
+
+ for (i = 0; i < len; i++) {
+ buf[i] = readb(&(alpr_ndfc->data));
+ }
+}
+
+static int alpr_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+ int i;
+
+ for (i = 0; i < len; i++)
+ if (buf[i] != readb(&(alpr_ndfc->data)))
+ return i;
+
+ return 0;
+}
+
+static int alpr_nand_dev_ready(struct mtd_info *mtd)
+{
+ volatile u_char val;
+
+ /*
+ * Blocking read to wait for NAND to be ready
+ */
+ val = readb(&(alpr_ndfc->addr_wait));
+
+ /*
+ * Return always true
+ */
+ return 1;
+}
+
+void board_nand_init(struct nand_chip *nand)
+{
+ alpr_ndfc = (struct alpr_ndfc_regs *)CFG_NAND_BASE;
+
+ nand->eccmode = NAND_ECC_SOFT;
+
+ /* Reference hardware control function */
+ nand->hwcontrol = alpr_nand_hwcontrol;
+ /* Set command delay time */
+ nand->write_byte = alpr_nand_write_byte;
+ nand->read_byte = alpr_nand_read_byte;
+ nand->write_buf = alpr_nand_write_buf;
+ nand->read_buf = alpr_nand_read_buf;
+ nand->verify_buf = alpr_nand_verify_buf;
+ nand->dev_ready = alpr_nand_dev_ready;
+}
+#endif
diff --git a/board/prodrive/alpr/u-boot.lds b/board/prodrive/alpr/u-boot.lds
new file mode 100644
index 0000000..4f04089
--- /dev/null
+++ b/board/prodrive/alpr/u-boot.lds
@@ -0,0 +1,157 @@
+/*
+ * (C) Copyright 2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ .resetvec 0xFFFFFFFC :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ .bootpg 0xFFFFF000 :
+ {
+ cpu/ppc4xx/start.o (.bootpg)
+ } = 0xffff
+
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/ppc4xx/start.o (.text)
+ board/prodrive/alpr/init.o (.text)
+ cpu/ppc4xx/kgdb.o (.text)
+ cpu/ppc4xx/traps.o (.text)
+ cpu/ppc4xx/interrupts.o (.text)
+ cpu/ppc4xx/serial.o (.text)
+ cpu/ppc4xx/cpu_init.o (.text)
+ cpu/ppc4xx/speed.o (.text)
+ common/dlmalloc.o (.text)
+ lib_generic/crc32.o (.text)
+ lib_ppc/extable.o (.text)
+ lib_generic/zlib.o (.text)
+
+/* . = env_offset;*/
+/* common/environment.o(.text)*/
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ *(.eh_frame)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/prodrive/common/flash.c b/board/prodrive/common/flash.c
index 8630cc1..363631f 100644
--- a/board/prodrive/common/flash.c
+++ b/board/prodrive/common/flash.c
@@ -48,6 +48,7 @@ void flash_print_info(flash_info_t *info)
case FLASH_MAN_AMD: printf ("AMD "); break;
case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
case FLASH_MAN_SST: printf ("SST "); break;
+ case FLASH_MAN_STM: printf ("ST "); break;
case FLASH_MAN_EXCEL: printf ("Excel Semiconductor "); break;
default: printf ("Unknown Vendor "); break;
}
@@ -156,6 +157,9 @@ static ulong flash_get_size(vu_long *addr, flash_info_t *info)
case (CFG_FLASH_WORD_SIZE)SST_MANUFACT:
info->flash_id = FLASH_MAN_SST;
break;
+ case (CFG_FLASH_WORD_SIZE)STM_MANUFACT:
+ info->flash_id = FLASH_MAN_STM;
+ break;
case (CFG_FLASH_WORD_SIZE)EXCEL_MANUFACT:
info->flash_id = FLASH_MAN_EXCEL;
break;
diff --git a/common/Makefile b/common/Makefile
index 07ddc95..0106088 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -41,7 +41,7 @@ COBJS = main.o ACEX1K.o altera.o bedbug.o circbuf.o \
cmd_pci.o cmd_pcmcia.o cmd_portio.o \
cmd_reginfo.o cmd_reiser.o cmd_scsi.o cmd_spi.o cmd_universe.o \
cmd_usb.o cmd_vfd.o \
- command.o console.o devices.o dlmalloc.o docecc.o \
+ command.o console.o cyclon2.o devices.o dlmalloc.o docecc.o \
environment.o env_common.o \
env_nand.o env_dataflash.o env_flash.o env_eeprom.o \
env_nvram.o env_nowhere.o \
diff --git a/common/altera.c b/common/altera.c
index ebd5038..06e8a95 100644
--- a/common/altera.c
+++ b/common/altera.c
@@ -50,15 +50,20 @@ int altera_load( Altera_desc *desc, void *buf, size_t bsize )
{
int ret_val = FPGA_FAIL; /* assume a failure */
- if (!altera_validate (desc, __FUNCTION__)) {
+ if (!altera_validate (desc, (char *)__FUNCTION__)) {
printf ("%s: Invalid device descriptor\n", __FUNCTION__);
} else {
switch (desc->family) {
case Altera_ACEX1K:
+ case Altera_CYC2:
#if (CONFIG_FPGA & CFG_ACEX1K)
PRINTF ("%s: Launching the ACEX1K Loader...\n",
__FUNCTION__);
ret_val = ACEX1K_load (desc, buf, bsize);
+#elif (CONFIG_FPGA & CFG_CYCLON2)
+ PRINTF ("%s: Launching the CYCLON II Loader...\n",
+ __FUNCTION__);
+ ret_val = CYC2_load (desc, buf, bsize);
#else
printf ("%s: No support for ACEX1K devices.\n",
__FUNCTION__);
@@ -78,7 +83,7 @@ int altera_dump( Altera_desc *desc, void *buf, size_t bsize )
{
int ret_val = FPGA_FAIL; /* assume a failure */
- if (!altera_validate (desc, __FUNCTION__)) {
+ if (!altera_validate (desc, (char *)__FUNCTION__)) {
printf ("%s: Invalid device descriptor\n", __FUNCTION__);
} else {
switch (desc->family) {
@@ -106,13 +111,16 @@ int altera_info( Altera_desc *desc )
{
int ret_val = FPGA_FAIL;
- if (altera_validate (desc, __FUNCTION__)) {
+ if (altera_validate (desc, (char *)__FUNCTION__)) {
printf ("Family: \t");
switch (desc->family) {
case Altera_ACEX1K:
printf ("ACEX1K\n");
break;
/* Add new family types here */
+ case Altera_CYC2:
+ printf ("CYCLON II\n");
+ break;
default:
printf ("Unknown family type, %d\n", desc->family);
}
@@ -147,8 +155,11 @@ int altera_info( Altera_desc *desc )
printf ("Device Function Table @ 0x%p\n", desc->iface_fns);
switch (desc->family) {
case Altera_ACEX1K:
+ case Altera_CYC2:
#if (CONFIG_FPGA & CFG_ACEX1K)
ACEX1K_info (desc);
+#elif (CONFIG_FPGA & CFG_CYCLON2)
+ CYC2_info (desc);
#else
/* just in case */
printf ("%s: No support for ACEX1K devices.\n",
@@ -176,7 +187,7 @@ int altera_reloc( Altera_desc *desc, ulong reloc_offset)
{
int ret_val = FPGA_FAIL; /* assume a failure */
- if (!altera_validate (desc, __FUNCTION__)) {
+ if (!altera_validate (desc, (char *)__FUNCTION__)) {
printf ("%s: Invalid device descriptor\n", __FUNCTION__);
} else {
switch (desc->family) {
@@ -188,6 +199,14 @@ int altera_reloc( Altera_desc *desc, ulong reloc_offset)
__FUNCTION__);
#endif
break;
+ case Altera_CYC2:
+#if (CONFIG_FPGA & CFG_CYCLON2)
+ ret_val = CYC2_reloc (desc, reloc_offset);
+#else
+ printf ("%s: No support for CYCLON II devices.\n",
+ __FUNCTION__);
+#endif
+ break;
/* Add new family types here */
default:
printf ("%s: Unsupported family type, %d\n",
diff --git a/common/cmd_fpga.c b/common/cmd_fpga.c
index 9a01e7d..3444091 100644
--- a/common/cmd_fpga.c
+++ b/common/cmd_fpga.c
@@ -55,6 +55,7 @@ static int fpga_get_op (char *opstr);
#define FPGA_LOAD 1
#define FPGA_LOADB 2
#define FPGA_DUMP 3
+#define FPGA_LOADMK 4
/* Convert bitstream data and load into the fpga */
int fpga_loadbitstream(unsigned long dev, char* fpgadata, size_t size)
@@ -251,6 +252,23 @@ int do_fpga (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
rc = fpga_loadbitstream(dev, fpga_data, data_size);
break;
+ case FPGA_LOADMK:
+ {
+ image_header_t header;
+ image_header_t *hdr = &header;
+ ulong data;
+
+ memmove (&header, (char *)fpga_data, sizeof(image_header_t));
+ if (ntohl(hdr->ih_magic) != IH_MAGIC) {
+ puts ("Bad Magic Number\n");
+ return 1;
+ }
+ data = ((ulong)fpga_data + sizeof(image_header_t));
+ data_size = ntohl(hdr->ih_size);
+ rc = fpga_load (dev, (void *)data, data_size);
+ }
+ break;
+
case FPGA_DUMP:
rc = fpga_dump (dev, fpga_data, data_size);
break;
@@ -282,6 +300,8 @@ static int fpga_get_op (char *opstr)
op = FPGA_LOADB;
} else if (!strcmp ("load", opstr)) {
op = FPGA_LOAD;
+ } else if (!strcmp ("loadmk", opstr)) {
+ op = FPGA_LOADMK;
} else if (!strcmp ("dump", opstr)) {
op = FPGA_DUMP;
}
@@ -299,5 +319,6 @@ U_BOOT_CMD (fpga, 6, 1, do_fpga,
"\tinfo\tlist known device information\n"
"\tload\tLoad device from memory buffer\n"
"\tloadb\tLoad device from bitstream buffer (Xilinx devices only)\n"
+ "\tloadmk\tLoad device generated with mkimage\n"
"\tdump\tLoad device to memory buffer\n");
#endif /* CONFIG_FPGA && CONFIG_COMMANDS & CFG_CMD_FPGA */
diff --git a/common/cyclon2.c b/common/cyclon2.c
new file mode 100644
index 0000000..dce13b5
--- /dev/null
+++ b/common/cyclon2.c
@@ -0,0 +1,305 @@
+/*
+ * (C) Copyright 2006
+ * Heiko Schocher, hs@denx.de
+ * Based on ACE1XK.c
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h> /* core U-Boot definitions */
+#include <altera.h>
+#include <ACEX1K.h> /* ACEX device family */
+
+#if (CONFIG_FPGA & (CFG_ALTERA | CFG_CYCLON2))
+
+/* Define FPGA_DEBUG to get debug printf's */
+#ifdef FPGA_DEBUG
+#define PRINTF(fmt,args...) printf (fmt ,##args)
+#else
+#define PRINTF(fmt,args...)
+#endif
+
+/* Note: The assumption is that we cannot possibly run fast enough to
+ * overrun the device (the Slave Parallel mode can free run at 50MHz).
+ * If there is a need to operate slower, define CONFIG_FPGA_DELAY in
+ * the board config file to slow things down.
+ */
+#ifndef CONFIG_FPGA_DELAY
+#define CONFIG_FPGA_DELAY()
+#endif
+
+#ifndef CFG_FPGA_WAIT
+#define CFG_FPGA_WAIT CFG_HZ/10 /* 100 ms */
+#endif
+
+static int CYC2_ps_load( Altera_desc *desc, void *buf, size_t bsize );
+static int CYC2_ps_dump( Altera_desc *desc, void *buf, size_t bsize );
+/* static int CYC2_ps_info( Altera_desc *desc ); */
+static int CYC2_ps_reloc( Altera_desc *desc, ulong reloc_offset );
+
+/* ------------------------------------------------------------------------- */
+/* CYCLON2 Generic Implementation */
+int CYC2_load (Altera_desc * desc, void *buf, size_t bsize)
+{
+ int ret_val = FPGA_FAIL;
+
+ switch (desc->iface) {
+ case passive_serial:
+ PRINTF ("%s: Launching Passive Serial Loader\n", __FUNCTION__);
+ ret_val = CYC2_ps_load (desc, buf, bsize);
+ break;
+
+ /* Add new interface types here */
+
+ default:
+ printf ("%s: Unsupported interface type, %d\n",
+ __FUNCTION__, desc->iface);
+ }
+
+ return ret_val;
+}
+
+int CYC2_dump (Altera_desc * desc, void *buf, size_t bsize)
+{
+ int ret_val = FPGA_FAIL;
+
+ switch (desc->iface) {
+ case passive_serial:
+ PRINTF ("%s: Launching Passive Serial Dump\n", __FUNCTION__);
+ ret_val = CYC2_ps_dump (desc, buf, bsize);
+ break;
+
+ /* Add new interface types here */
+
+ default:
+ printf ("%s: Unsupported interface type, %d\n",
+ __FUNCTION__, desc->iface);
+ }
+
+ return ret_val;
+}
+
+int CYC2_info( Altera_desc *desc )
+{
+ return FPGA_SUCCESS;
+}
+
+int CYC2_reloc (Altera_desc * desc, ulong reloc_offset)
+{
+ int ret_val = FPGA_FAIL; /* assume a failure */
+
+ if (desc->family != Altera_CYC2) {
+ printf ("%s: Unsupported family type, %d\n",
+ __FUNCTION__, desc->family);
+ return FPGA_FAIL;
+ } else
+ switch (desc->iface) {
+ case passive_serial:
+ ret_val = CYC2_ps_reloc (desc, reloc_offset);
+ break;
+
+ /* Add new interface types here */
+
+ default:
+ printf ("%s: Unsupported interface type, %d\n",
+ __FUNCTION__, desc->iface);
+ }
+
+ return ret_val;
+}
+
+/* ------------------------------------------------------------------------- */
+/* CYCLON2 Passive Serial Generic Implementation */
+static int CYC2_ps_load (Altera_desc * desc, void *buf, size_t bsize)
+{
+ int ret_val = FPGA_FAIL; /* assume the worst */
+ Altera_CYC2_Passive_Serial_fns *fn = desc->iface_fns;
+ int ret = 0;
+
+ PRINTF ("%s: start with interface functions @ 0x%p\n",
+ __FUNCTION__, fn);
+
+ if (fn) {
+ int cookie = desc->cookie; /* make a local copy */
+ unsigned long ts; /* timestamp */
+
+ PRINTF ("%s: Function Table:\n"
+ "ptr:\t0x%p\n"
+ "struct: 0x%p\n"
+ "config:\t0x%p\n"
+ "status:\t0x%p\n"
+ "write:\t0x%p\n"
+ "done:\t0x%p\n\n",
+ __FUNCTION__, &fn, fn, fn->config, fn->status,
+ fn->write, fn->done);
+#ifdef CFG_FPGA_PROG_FEEDBACK
+ printf ("Loading FPGA Device %d...", cookie);
+#endif
+
+ /*
+ * Run the pre configuration function if there is one.
+ */
+ if (*fn->pre) {
+ (*fn->pre) (cookie);
+ }
+
+ /* Establish the initial state */
+ (*fn->config) (TRUE, TRUE, cookie); /* Assert nCONFIG */
+
+ udelay(2); /* T_cfg > 2us */
+
+ /* Wait for nSTATUS to be asserted */
+ ts = get_timer (0); /* get current time */
+ do {
+ CONFIG_FPGA_DELAY ();
+ if (get_timer (ts) > CFG_FPGA_WAIT) { /* check the time */
+ puts ("** Timeout waiting for STATUS to go high.\n");
+ (*fn->abort) (cookie);
+ return FPGA_FAIL;
+ }
+ } while (!(*fn->status) (cookie));
+
+ /* Get ready for the burn */
+ CONFIG_FPGA_DELAY ();
+
+ ret = (*fn->write) (buf, bsize, TRUE, cookie);
+ if (ret) {
+ puts ("** Write failed.\n");
+ (*fn->abort) (cookie);
+ return FPGA_FAIL;
+ }
+#ifdef CFG_FPGA_PROG_FEEDBACK
+ puts(" OK? ...");
+#endif
+
+ CONFIG_FPGA_DELAY ();
+
+#ifdef CFG_FPGA_PROG_FEEDBACK
+ putc (' '); /* terminate the dotted line */
+#endif
+
+ /*
+ * Checking FPGA's CONF_DONE signal - correctly booted ?
+ */
+
+ if ( ! (*fn->done) (cookie) ) {
+ puts ("** Booting failed! CONF_DONE is still deasserted.\n");
+ (*fn->abort) (cookie);
+ return (FPGA_FAIL);
+ }
+#ifdef CFG_FPGA_PROG_FEEDBACK
+ puts(" OK\n");
+#endif
+
+ ret_val = FPGA_SUCCESS;
+
+#ifdef CFG_FPGA_PROG_FEEDBACK
+ if (ret_val == FPGA_SUCCESS) {
+ puts ("Done.\n");
+ }
+ else {
+ puts ("Fail.\n");
+ }
+#endif
+ (*fn->post) (cookie);
+
+ } else {
+ printf ("%s: NULL Interface function table!\n", __FUNCTION__);
+ }
+
+ return ret_val;
+}
+
+static int CYC2_ps_dump (Altera_desc * desc, void *buf, size_t bsize)
+{
+ /* Readback is only available through the Slave Parallel and */
+ /* boundary-scan interfaces. */
+ printf ("%s: Passive Serial Dumping is unavailable\n",
+ __FUNCTION__);
+ return FPGA_FAIL;
+}
+
+static int CYC2_ps_reloc (Altera_desc * desc, ulong reloc_offset)
+{
+ int ret_val = FPGA_FAIL; /* assume the worst */
+ Altera_CYC2_Passive_Serial_fns *fn_r, *fn =
+ (Altera_CYC2_Passive_Serial_fns *) (desc->iface_fns);
+
+ if (fn) {
+ ulong addr;
+
+ /* Get the relocated table address */
+ addr = (ulong) fn + reloc_offset;
+ fn_r = (Altera_CYC2_Passive_Serial_fns *) addr;
+
+ if (!fn_r->relocated) {
+
+ if (memcmp (fn_r, fn,
+ sizeof (Altera_CYC2_Passive_Serial_fns))
+ == 0) {
+ /* good copy of the table, fix the descriptor pointer */
+ desc->iface_fns = fn_r;
+ } else {
+ PRINTF ("%s: Invalid function table at 0x%p\n",
+ __FUNCTION__, fn_r);
+ return FPGA_FAIL;
+ }
+
+ PRINTF ("%s: Relocating descriptor at 0x%p\n", __FUNCTION__,
+ desc);
+
+ addr = (ulong) (fn->pre) + reloc_offset;
+ fn_r->pre = (Altera_pre_fn) addr;
+
+ addr = (ulong) (fn->config) + reloc_offset;
+ fn_r->config = (Altera_config_fn) addr;
+
+ addr = (ulong) (fn->status) + reloc_offset;
+ fn_r->status = (Altera_status_fn) addr;
+
+ addr = (ulong) (fn->done) + reloc_offset;
+ fn_r->done = (Altera_done_fn) addr;
+
+ addr = (ulong) (fn->write) + reloc_offset;
+ fn_r->write = (Altera_write_fn) addr;
+
+ addr = (ulong) (fn->abort) + reloc_offset;
+ fn_r->abort = (Altera_abort_fn) addr;
+
+ addr = (ulong) (fn->post) + reloc_offset;
+ fn_r->post = (Altera_post_fn) addr;
+
+ fn_r->relocated = TRUE;
+
+ } else {
+ /* this table has already been moved */
+ /* XXX - should check to see if the descriptor is correct */
+ desc->iface_fns = fn_r;
+ }
+
+ ret_val = FPGA_SUCCESS;
+ } else {
+ printf ("%s: NULL Interface function table!\n", __FUNCTION__);
+ }
+
+ return ret_val;
+}
+
+#endif /* (CONFIG_FPGA & (CFG_ALTERA | CFG_CYCLON2)) */
diff --git a/common/fpga.c b/common/fpga.c
index 02d3e42..2eff239 100644
--- a/common/fpga.c
+++ b/common/fpga.c
@@ -139,7 +139,7 @@ static int fpga_dev_info( int devnum )
printf( "Xilinx Device\nDescriptor @ 0x%p\n", desc );
ret_val = xilinx_info( desc->devdesc );
#else
- fpga_no_sup( __FUNCTION__, "Xilinx devices" );
+ fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" );
#endif
break;
case fpga_altera:
@@ -178,7 +178,7 @@ int fpga_reloc( fpga_type devtype, void *desc, ulong reloc_off )
#if CONFIG_FPGA & CFG_FPGA_XILINX
ret_val = xilinx_reloc( desc, reloc_off );
#else
- fpga_no_sup( __FUNCTION__, "Xilinx devices" );
+ fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" );
#endif
break;
case fpga_altera:
@@ -271,7 +271,7 @@ int fpga_load( int devnum, void *buf, size_t bsize )
#if CONFIG_FPGA & CFG_FPGA_XILINX
ret_val = xilinx_load( desc->devdesc, buf, bsize );
#else
- fpga_no_sup( __FUNCTION__, "Xilinx devices" );
+ fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" );
#endif
break;
case fpga_altera:
@@ -304,7 +304,7 @@ int fpga_dump( int devnum, void *buf, size_t bsize )
#if CONFIG_FPGA & CFG_FPGA_XILINX
ret_val = xilinx_dump( desc->devdesc, buf, bsize );
#else
- fpga_no_sup( __FUNCTION__, "Xilinx devices" );
+ fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" );
#endif
break;
case fpga_altera:
diff --git a/cpu/ppc4xx/405gp_pci.c b/cpu/ppc4xx/405gp_pci.c
index 03128d3..9b711e2 100644
--- a/cpu/ppc4xx/405gp_pci.c
+++ b/cpu/ppc4xx/405gp_pci.c
@@ -475,7 +475,11 @@ void pci_440_init (struct pci_controller *hose)
pci_set_region(hose->regions + reg_num++,
CFG_PCI_TARGBASE,
CFG_PCI_MEMBASE,
+#ifdef CFG_PCI_MEMSIZE
+ CFG_PCI_MEMSIZE,
+#else
0x10000000,
+#endif
PCI_REGION_MEM );
#if defined(CONFIG_PCI_SYS_MEM_BUS) && defined(CONFIG_PCI_SYS_MEM_PHYS) && \
diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c
index f4a7208..faa5257 100644
--- a/cpu/ppc4xx/cpu.c
+++ b/cpu/ppc4xx/cpu.c
@@ -41,6 +41,10 @@
DECLARE_GLOBAL_DATA_PTR;
#endif
+#if defined(CONFIG_BOARD_RESET)
+void board_reset(void);
+#endif
+
#if defined(CONFIG_440)
#define FREQ_EBC (sys_info.freqEPB)
#else
@@ -422,23 +426,15 @@ int ppc440spe_revB() {
int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
-#if defined(CONFIG_YOSEMITE) || defined(CONFIG_YELLOWSTONE)
- /*give reset to BCSR*/
- *(unsigned char*)(CFG_BCSR_BASE | 0x06) = 0x09;
-
+#if defined(CONFIG_BOARD_RESET)
+ board_reset();
#else
-
/*
* Initiate system reset in debug control register DBCR
*/
- __asm__ __volatile__("lis 3, 0x3000" ::: "r3");
-#if defined(CONFIG_440)
- __asm__ __volatile__("mtspr 0x134, 3");
-#else
- __asm__ __volatile__("mtspr 0x3f2, 3");
-#endif
+ mtspr(dbcr0, 0x30000000);
+#endif /* defined(CONFIG_BOARD_RESET) */
-#endif/* defined(CONFIG_YOSEMITE) || defined(CONFIG_YELLOWSTONE)*/
return 1;
}
diff --git a/cpu/ppc4xx/sdram.c b/cpu/ppc4xx/sdram.c
index faeea5c..f06038e 100644
--- a/cpu/ppc4xx/sdram.c
+++ b/cpu/ppc4xx/sdram.c
@@ -351,6 +351,14 @@ long int initdram(int board_type)
int i;
int tr1_bank1;
+#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP)
+ /*
+ * Soft-reset SDRAM controller.
+ */
+ mtsdr(sdr_srst, SDR0_SRST_DMC);
+ mtsdr(sdr_srst, 0x00000000);
+#endif
+
for (i=0; i<N_MB0CF; i++) {
/*
* Disable memory controller.
diff --git a/drivers/nand/nand_base.c b/drivers/nand/nand_base.c
index b7a5d32..b003085 100644
--- a/drivers/nand/nand_base.c
+++ b/drivers/nand/nand_base.c
@@ -2407,7 +2407,9 @@ int nand_scan (struct mtd_info *mtd, int maxchips)
}
if (!nand_flash_ids[i].name) {
+#ifndef CFG_NAND_QUIET_TEST
printk (KERN_WARNING "No NAND device found!!!\n");
+#endif
this->select_chip(mtd, -1);
return 1;
}
diff --git a/include/ACEX1K.h b/include/ACEX1K.h
index f75c463..f249d64 100644
--- a/include/ACEX1K.h
+++ b/include/ACEX1K.h
@@ -35,6 +35,11 @@ extern int ACEX1K_dump( Altera_desc *desc, void *buf, size_t bsize );
extern int ACEX1K_info( Altera_desc *desc );
extern int ACEX1K_reloc( Altera_desc *desc, ulong reloc_off );
+extern int CYC2_load( Altera_desc *desc, void *image, size_t size );
+extern int CYC2_dump( Altera_desc *desc, void *buf, size_t bsize );
+extern int CYC2_info( Altera_desc *desc );
+extern int CYC2_reloc( Altera_desc *desc, ulong reloc_off );
+
/* Slave Serial Implementation function table */
typedef struct {
Altera_pre_fn pre;
@@ -48,6 +53,18 @@ typedef struct {
int relocated;
} Altera_ACEX1K_Passive_Serial_fns;
+/* Slave Serial Implementation function table */
+typedef struct {
+ Altera_pre_fn pre;
+ Altera_config_fn config;
+ Altera_status_fn status;
+ Altera_done_fn done;
+ Altera_write_fn write;
+ Altera_abort_fn abort;
+ Altera_post_fn post;
+ int relocated;
+} Altera_CYC2_Passive_Serial_fns;
+
/* Device Image Sizes
*********************************************************************/
/* ACEX1K */
@@ -60,6 +77,8 @@ typedef struct {
#endif
#define Altera_EP1K100_SIZE (166965*8)
+#define Altera_EP2C35_SIZE 883905
+
/* Descriptor Macros
*********************************************************************/
/* ACEX1K devices */
diff --git a/include/altera.h b/include/altera.h
index 74b6729..7b8cb4a 100644
--- a/include/altera.h
+++ b/include/altera.h
@@ -34,8 +34,10 @@
/* Altera Model definitions
*********************************************************************/
#define CFG_ACEX1K CFG_FPGA_DEV( 0x1 )
+#define CFG_CYCLON2 CFG_FPGA_DEV( 0x2 )
#define CFG_ALTERA_ACEX1K (CFG_FPGA_ALTERA | CFG_ACEX1K)
+#define CFG_ALTERA_CYCLON2 (CFG_FPGA_ALTERA | CFG_CYCLON2)
/* Add new models here */
/* Altera Interface definitions
@@ -56,6 +58,7 @@ typedef enum { /* typedef Altera_iface */
typedef enum { /* typedef Altera_Family */
min_altera_type, /* insert all new types after this */
Altera_ACEX1K, /* ACEX1K Family */
+ Altera_CYC2, /* CYCLONII Family */
/* Add new models here */
max_altera_type /* insert all new types before this */
} Altera_Family; /* end, typedef Altera_Family */
@@ -84,6 +87,7 @@ typedef int (*Altera_status_fn)( int cookie );
typedef int (*Altera_done_fn)( int cookie );
typedef int (*Altera_clk_fn)( int assert_clk, int flush, int cookie );
typedef int (*Altera_data_fn)( int assert_data, int flush, int cookie );
+typedef int (*Altera_write_fn)(void *buf, size_t len, int flush, int cookie);
typedef int (*Altera_abort_fn)( int cookie );
typedef int (*Altera_post_fn)( int cookie );
diff --git a/include/configs/alpr.h b/include/configs/alpr.h
new file mode 100644
index 0000000..c6731ba
--- /dev/null
+++ b/include/configs/alpr.h
@@ -0,0 +1,352 @@
+/*
+ * (C) Copyright 2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_ALPR 1 /* Board is ebony */
+#define CONFIG_440GX 1 /* Specifc GX support */
+#define CONFIG_4xx 1 /* ... PPC4xx family */
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
+#define CONFIG_BOARD_RESET 1 /* call board_reset() */
+#undef CFG_DRAM_TEST /* Disable-takes long time! */
+#define CONFIG_SYS_CLK_FREQ 33333000 /* external freq to pll */
+
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ *----------------------------------------------------------------------*/
+#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
+#define CFG_FLASH_BASE 0xffe00000 /* start of FLASH */
+#define CFG_MONITOR_BASE 0xfffc0000 /* start of monitor */
+#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */
+#define CFG_PCI_MEMSIZE 0x40000000 /* size of mapped pci memory */
+#define CFG_PERIPHERAL_BASE 0xe0000000 /* internal peripherals */
+#define CFG_ISRAM_BASE 0xc0000000 /* internal SRAM */
+#define CFG_PCI_BASE 0xd0000000 /* internal PCI regs */
+#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000
+#define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000
+#define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000
+
+
+#define CFG_FPGA_BASE (CFG_PERIPHERAL_BASE + 0x08300000)
+#define CFG_NVRAM_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x08000000)
+
+/*-----------------------------------------------------------------------
+ * Initial RAM & stack pointer (placed in internal SRAM)
+ *----------------------------------------------------------------------*/
+#define CFG_TEMP_STACK_OCM 1
+#define CFG_OCM_DATA_ADDR CFG_ISRAM_BASE
+#define CFG_INIT_RAM_ADDR CFG_ISRAM_BASE /* Initial RAM address */
+#define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */
+#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
+
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4)
+#define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR
+
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc*/
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#undef CFG_EXT_SERIAL_CLOCK
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_UART1_CONSOLE /* define for uart1 as console */
+
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+/*-----------------------------------------------------------------------
+ * FLASH related
+ *----------------------------------------------------------------------*/
+#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */
+
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 1000 /* Timeout for Flash Write (in ms) */
+
+#define CFG_FLASH_WORD_SIZE unsigned short /* flash word size (width) */
+#define CFG_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */
+#define CFG_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */
+/*
+ * The following defines are added for buggy IOP480 byte interface.
+ * All other boards should use the standard values (CPCI405 etc.)
+ */
+#define CFG_FLASH_READ0 0x0000 /* 0 is standard */
+#define CFG_FLASH_READ1 0x0001 /* 1 is standard */
+#define CFG_FLASH_READ2 0x0002 /* 2 is standard */
+
+#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
+
+#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
+
+#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
+#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
+
+/* Address and size of Redundant Environment Sector */
+#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+
+/*-----------------------------------------------------------------------
+ * DDR SDRAM
+ *----------------------------------------------------------------------*/
+#undef CONFIG_SPD_EEPROM /* Don't use SPD EEPROM for setup */
+#define CONFIG_SDRAM_BANK0 1 /* init onboard DDR SDRAM bank 0 */
+#undef CONFIG_SDRAM_ECC /* enable ECC support */
+#define CFG_SDRAM_TABLE { \
+ {(256 << 20), 13, 0x000C4001}, /* 256MB mode 3, 13x10(4)*/ \
+ {(64 << 20), 12, 0x00082001}} /* 64MB mode 2, 12x9(4) */
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CFG_I2C_SPEED 100000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
+
+/*-----------------------------------------------------------------------
+ * I2C EEPROM (PCF8594C)
+ *----------------------------------------------------------------------*/
+#define CFG_I2C_EEPROM_ADDR 0x54 /* EEPROM PCF8594C */
+#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
+/* mask of address bits that overflow into the "EEPROM chip address" */
+#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07
+#define CFG_EEPROM_PAGE_WRITE_BITS 3 /* The Philips PCF8594C has */
+ /* 8 byte page write mode using */
+ /* last 3 bits of the address */
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 40 /* and takes up to 40 msec */
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
+
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "hostname=alpr\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off panic=1\0" \
+ "addtty=setenv bootargs ${bootargs} console=ttyS1,${baudrate}\0"\
+ "flash_nfs=run nfsargs addip addtty;" \
+ "bootm ${kernel_addr}\0" \
+ "flash_self=run ramargs addip addtty;" \
+ "bootm ${kernel_addr} ${ramdisk_addr}\0" \
+ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
+ "bootm\0" \
+ "rootpath=/opt/eldk/ppc_4xx\0" \
+ "bootfile=/tftpboot/alpr/uImage\0" \
+ "kernel_addr=fff00000\0" \
+ "ramdisk_addr=fff10000\0" \
+ "load=tftp 100000 /tftpboot/alpr/u-boot.bin\0" \
+ "update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \
+ "cp.b 100000 fffc0000 40000;" \
+ "setenv filesize;saveenv\0" \
+ "upd=run load;run update\0" \
+ ""
+#define CONFIG_BOOTCOMMAND "run flash_self"
+
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_NET_MULTI 1
+#define CONFIG_PHY_ADDR 0x02 /* dummy setting, no EMAC0 used */
+#define CONFIG_PHY1_ADDR 0x03 /* dummy setting, no EMAC1 used */
+#define CONFIG_PHY2_ADDR 0x00 /* test-only: will be changed */
+#define CONFIG_PHY3_ADDR 0x01 /* PHY address for EMAC3 */
+#define CONFIG_HAS_ETH0
+#define CONFIG_HAS_ETH1
+#define CONFIG_HAS_ETH2
+#define CONFIG_HAS_ETH3
+#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
+#define CONFIG_88E1111_CLK_DELAY 1 /* set CLK delay on ALPR */
+#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
+#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
+
+#define CONFIG_NETCONSOLE /* include NetConsole support */
+
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_ASKENV | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_DIAG | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_ELF | \
+ CFG_CMD_I2C | \
+ CFG_CMD_IRQ | \
+ CFG_CMD_MII | \
+ CFG_CMD_NET | \
+ CFG_CMD_NFS | \
+ CFG_CMD_PCI | \
+ CFG_CMD_PING | \
+ CFG_CMD_FPGA | \
+ CFG_CMD_NAND | \
+ CFG_CMD_REGINFO)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
+#define CONFIG_LOOPW 1 /* enable loopw command */
+#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+/* General PCI */
+#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */
+#define CONFIG_PCI_BOOTDELAY 0 /* enable pci bootdelay variable*/
+
+/* Board-specific PCI */
+#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */
+#define CFG_PCI_TARGET_INIT /* let board init pci target */
+#define CFG_PCI_MASTER_INIT
+
+#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */
+#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
+
+/*-----------------------------------------------------------------------
+ * FPGA stuff
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_FPGA CFG_ALTERA_CYCLON2
+#undef CFG_FPGA_CHECK_CTRLC
+#undef CFG_FPGA_PROG_FEEDBACK
+#define CONFIG_FPGA_COUNT 1 /* Ich habe 2 ... aber in
+ Reihe geschaltet -> sollte gehen,
+ aufpassen mit Datasize ist jetzt
+ halt doppelt so gross ... Seite 306
+ ist das mit den multiple Device in PS
+ Mode erklaert ...*/
+
+/* FPGA program pin configuration */
+#define CFG_GPIO_CLK 18 /* FPGA clk pin (cpu output) */
+#define CFG_GPIO_DATA 19 /* FPGA data pin (cpu output) */
+#define CFG_GPIO_STATUS 20 /* FPGA status pin (cpu input) */
+#define CFG_GPIO_CONFIG 21 /* FPGA CONFIG pin (cpu output) */
+#define CFG_GPIO_CON_DON 22 /* FPGA CONFIG_DONE pin (cpu input) */
+
+#define CFG_GPIO_SEL_DPR 14 /* cpu output */
+#define CFG_GPIO_SEL_AVR 15 /* cpu output */
+#define CFG_GPIO_PROG_EN 23 /* cpu output */
+
+/*
+ * NAND-FLASH stuff
+ */
+#define CFG_MAX_NAND_DEVICE 4
+#define NAND_MAX_CHIPS CFG_MAX_NAND_DEVICE
+#define CFG_NAND_BASE 0xF0000000 /* NAND FLASH Base Address */
+#define CFG_NAND_BASE_LIST { CFG_NAND_BASE + 0, CFG_NAND_BASE + 2, \
+ CFG_NAND_BASE + 4, CFG_NAND_BASE + 6 }
+#define CFG_NAND_QUIET_TEST 1 /* don't warn upon unknown NAND flash */
+
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
+ *----------------------------------------------------------------------*/
+#define CFG_FLASH CFG_FLASH_BASE
+
+/* Memory Bank 0 (Flash Bank 0, NOR-FLASH) initialization */
+#define CFG_EBC_PB0AP 0x92015480
+#define CFG_EBC_PB0CR (CFG_FLASH | 0x3A000) /* BS=2MB,BU=R/W,BW=16bit */
+
+/* Memory Bank 1 (NAND-FLASH) initialization */
+#define CFG_EBC_PB1AP 0x01840380 /* TWT=3 */
+#define CFG_EBC_PB1CR (CFG_NAND_BASE | 0x1A000) /* BS=1MB,BU=R/W,BW=16bit */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE 32768 /* For AMCC 440 CPUs */
+#define CFG_CACHELINE_SIZE 32 /* ... */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+#endif /* __CONFIG_H */
diff --git a/include/configs/yellowstone.h b/include/configs/yellowstone.h
index ba27f37..58717f8 100644
--- a/include/configs/yellowstone.h
+++ b/include/configs/yellowstone.h
@@ -37,6 +37,7 @@
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */
+#define CONFIG_BOARD_RESET 1 /* call board_reset() */
/*-----------------------------------------------------------------------
* Base addresses -- Note these are effective addresses where the
diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h
index 3d7b4a2..6e942ab 100644
--- a/include/configs/yosemite.h
+++ b/include/configs/yosemite.h
@@ -37,6 +37,7 @@
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */
+#define CONFIG_BOARD_RESET 1 /* call board_reset() */
/*-----------------------------------------------------------------------
* Base addresses -- Note these are effective addresses where the
diff --git a/include/ppc440.h b/include/ppc440.h
index e407320..407daae 100644
--- a/include/ppc440.h
+++ b/include/ppc440.h
@@ -3183,7 +3183,7 @@
#define GPIO0 0
#define GPIO1 1
-#if defined(CONFIG_440GP)
+#if defined(CONFIG_440GP) || defined(CONFIG_440GX)
#define GPIO0_BASE (CFG_PERIPHERAL_BASE+0x00000700)
#define GPIO0_OR (GPIO0_BASE+0x0)