summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/net/dm9000x.c33
1 files changed, 21 insertions, 12 deletions
diff --git a/drivers/net/dm9000x.c b/drivers/net/dm9000x.c
index 0a2ce68..05d07f3 100644
--- a/drivers/net/dm9000x.c
+++ b/drivers/net/dm9000x.c
@@ -41,6 +41,7 @@ v1.2 03/18/2003 Weilun Huang <weilun_huang@davicom.com.tw>:
06/03/2008 Remy Bohmer <linux@bohmer.net>
- Added autodetect of databus width.
+ - Made debug code compile again.
These changes are tested with DM9000{A,EP,E} together
with a 200MHz Atmel AT91SAM92161 core
@@ -65,10 +66,22 @@ TODO: Homerun NIC and longrun NIC are not functional, only internal at the
/* #define CONFIG_DM9000_DEBUG */
#ifdef CONFIG_DM9000_DEBUG
-#define DM9000_DBG(fmt,args...) printf(fmt ,##args)
-#else /* */
+#define DM9000_DBG(fmt,args...) printf(fmt, ##args)
+#define DM9000_DMP_PACKET(func,packet,length) \
+ do { \
+ int i; \
+ printf(func ": length: %d\n", length); \
+ for (i = 0; i < length; i++) { \
+ if (i % 8 == 0) \
+ printf("\n%s: %02x: ", func, i); \
+ printf("%02x ", ((unsigned char *) packet)[i]); \
+ } printf("\n"); \
+ } while(0)
+#else
#define DM9000_DBG(fmt,args...)
-#endif /* */
+#define DM9000_DMP_PACKET(func,packet,length)
+#endif
+
enum DM9000_PHY_mode { DM9000_10MHD = 0, DM9000_100MHD =
1, DM9000_10MFD = 4, DM9000_100MFD = 5, DM9000_AUTO =
8, DM9000_1M_HPNA = 0x10
@@ -133,7 +146,7 @@ dump_regs(void)
DM9000_DBG("TSRII (0x04): %02x\n", DM9000_ior(4));
DM9000_DBG("RCR (0x05): %02x\n", DM9000_ior(5));
DM9000_DBG("RSR (0x06): %02x\n", DM9000_ior(6));
- DM9000_DBG("ISR (0xFE): %02x\n", DM9000_ior(ISR));
+ DM9000_DBG("ISR (0xFE): %02x\n", DM9000_ior(DM9000_ISR));
DM9000_DBG("\n");
}
#endif
@@ -496,12 +509,7 @@ eth_send(volatile void *packet, int length)
int tmo;
struct board_info *db = &dm9000_info;
- DM9000_DBG("eth_send: length: %d\n", length);
- for (i = 0; i < length; i++) {
- if (i % 8 == 0)
- DM9000_DBG("\nSend: 02x: ", i);
- DM9000_DBG("%02x ", ((unsigned char *) packet)[i]);
- } DM9000_DBG("\n");
+ DM9000_DMP_PACKET("eth_send", packet, length);
/* Move data to DM9000 TX RAM */
data_ptr = (char *) packet;
@@ -596,6 +604,7 @@ eth_rx(void)
dm9000_reset();
}
} else {
+ DM9000_DMP_PACKET("eth_rx", rdptr, RxLen);
/* Pass to upper layer */
DM9000_DBG("passing packet to upper layer\n");
@@ -666,7 +675,7 @@ phy_read(int reg)
val = (DM9000_ior(DM9000_EPDRH) << 8) | DM9000_ior(DM9000_EPDRL);
/* The read data keeps on REG_0D & REG_0E */
- DM9000_DBG("phy_read(%d): %d\n", reg, val);
+ DM9000_DBG("phy_read(0x%x): 0x%x\n", reg, val);
return val;
}
@@ -686,6 +695,6 @@ phy_write(int reg, u16 value)
DM9000_iow(DM9000_EPCR, 0xa); /* Issue phyxcer write command */
udelay(500); /* Wait write complete */
DM9000_iow(DM9000_EPCR, 0x0); /* Clear phyxcer write command */
- DM9000_DBG("phy_write(reg:%d, value:%d)\n", reg, value);
+ DM9000_DBG("phy_write(reg:0x%x, value:0x%x)\n", reg, value);
}
#endif /* CONFIG_DRIVER_DM9000 */