diff options
114 files changed, 1082 insertions, 1748 deletions
@@ -26,6 +26,8 @@ /u-boot.ldr /u-boot.ldr.hex /u-boot.ldr.srec +/u-boot-onenand.bin +/u-boot-flexonenand.bin # # Generated files @@ -46,3 +48,8 @@ series # cscope files cscope.* + +# OneNAND IPL files +/onenand_ipl/onenand-ipl* +/onenand_ipl/board/*/onenand* +/onenand_ipl/board/*/*.S @@ -1,3 +1,553 @@ +commit a48311557db6e7e9473a6163b44bb1e6c6ed64c4 +Author: Mark Jackson <mpfj@mimc.co.uk> +Date: Thu Jul 31 16:09:00 2008 +0100 + + Add gzipped logo support + + The README file states that CONFIG_VIDEO_BMP_GZIP behaves as follows: + + If this option is set, additionally to standard BMP + images, gzipped BMP images can be displayed via the + splashscreen support or the bmp command. + + However, the splashscreen function *only* supports standard BMP images. + + This patch adds the documented gzip support. + + Signed-off-by: Mark Jackson <mpfj@mimc.co.uk> + +commit a5bcb01fbde6b1f1c9863cd86e5c4c369f0121ac +Author: Mark Jackson <mpfj@mimc.co.uk> +Date: Thu Jul 31 15:56:48 2008 +0100 + + Fix Atmel LCD controller endianess for AVR32 processors + + The Atmel lcd controller is used on Atmel's AT91 (little endian) and + AVR32 (big endian) platforms. + + As such, the controller can handle both big and little endian memory. + + This patch fixes the driver for the AVR32 platform. + + Signed-off-by: Mark Jackson <mpfj@mimc.co.uk> + +commit cdb8bd2fd3bcbe65d8e4334a55f5a667845426a1 +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Thu Jul 31 15:56:01 2008 +0200 + + apollon: fix build out of tree + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 2e752be39d3e398d4ab89ffa6634c397df298297 +Author: Guennadi Liakhovetski <lg@denx.de> +Date: Thu Jul 31 12:35:04 2008 +0200 + + Uncompressed images loaded to their start address shall set load_end too + + Signed-off-by: Guennadi Liakhovetski <lg@denx.de> + Acked-by: Bartlomiej Sieka <tur@semihalf.com> + +commit c37207d7f51e19c17f859966f314e27cc1231801 +Author: Wolfgang Denk <wd@denx.de> +Date: Wed Jul 16 16:38:59 2008 +0200 + + Fix printf() format problems with configurable prompts + + U-Boot allows for configurable prompt strings using the + CONFIG_AUTOBOOT_PROMPT resp. CONFIG_MENUPROMPT definitions. So far, + the assumption was that any such user defined problts would contain + exactly one "%d" format specifier. But some boards did not. + + To allow for flexible boot prompts without adding too complex code we + now allow to specify the whole list of printf() arguments in the user + definition. This is powerful, but requires a responsible user who + really understands what he is doing, as he needs to know for exanple + which variables are available in the respective context. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 54754120637b6a7f4ff774fb199fc550bcfea1da +Author: Wolfgang Denk <wd@denx.de> +Date: Thu Jul 31 17:02:14 2008 +0200 + + TQM85xx: fix typo introduce by commit ffbb5cb9 + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 0b4951d4cddca9cc800745891c95b291e47cbbd7 +Author: Wolfgang Denk <wd@denx.de> +Date: Thu Jul 31 15:27:01 2008 +0200 + + mvbc_p board: fix most build warnings. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit c4ec6db074051d2f6fc76a66411c60621b22bc02 +Author: Wolfgang Denk <wd@denx.de> +Date: Thu Jul 31 13:57:20 2008 +0200 + + E1000: clean up CONFIG_E1000_FALLBACK_MAC handling + + Avoid "integer constant is too large for 'long' type" warnings. + And simplify the code. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 9196b44334c330cc13de2464c59181e4db71f549 +Author: Matvejchikov Ilya <matvejchikov@gmail.com> +Date: Wed Jul 30 23:21:19 2008 +0400 + + 8260: Making the use of gd->pci_clk dependant on the CONFIG_PCI + + Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com> + +commit 6361ad4b596f5a940a01c91ae0297d98f790cbe0 +Author: Matvejchikov Ilya <matvejchikov@gmail.com> +Date: Wed Jul 30 23:20:32 2008 +0400 + + PPC: Add pci_clk in the global_data for CPM2 processors + + This patch adds pci_clk field to the global_data structure for the + processors which have CPM2 module in case the CONFIG_PCI is defined. + + Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com> + +commit f0ff885ca64655bee6540eb8a25eed90b1152686 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Jul 30 14:13:30 2008 -0500 + + mpc85xx: Update linker scripts for Freescale boards + + * Move to using absolute addressing always. Makes the scripts a bit more + portable and common + * Moved .bss after the end of the image. These allows us to have more + room in the resulting binary image for code and data. + * Removed .text object files that aren't really needed + * Make sure _end is 4-byte aligned as the .bss init code expects this. + (Its possible that the end of .bss isn't 4-byte aligned) + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 57c219ad5d34dd9d49991777a62e3899595f2ec7 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Wed Jul 30 08:01:15 2008 -0500 + + Fix compile warnings in dlmalloc + + The origional code was using on odd reference to get to the first + real element in av_[]. The first two elements of the array are + not used for actual bins, but for house keeping. If we are more + explicit about how use the first few elements we can get rid of the + warnings: + + dlmalloc.c: In function 'malloc_extend_top': + dlmalloc.c:1971: warning: dereferencing type-punned pointer will break strict-aliasing rules + dlmalloc.c:1999: warning: dereferencing type-punned pointer will break strict-aliasing rules + dlmalloc.c:2029: warning: dereferencing type-punned pointer will break strict-aliasing rules + ... + + The logic of how this code came to be is: + bin_at(0) = (char*)&(av_[2]) - 2*SIZE_SZ + + SIZE_SZ is the size of pointer, and av_ is arry of pointers so: + bin_at(0) = &(av_[0]) + + Going from there to bin_at(0)->fd or bin_at(0)->size should be straight forward. + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 3f9ae1a5d43c49a8ecf497470c3d1d80255e44b9 +Author: Stefan Roese <sr@denx.de> +Date: Wed Jul 30 10:21:01 2008 +0200 + + ppc4xx: Fix W7OLMG compile problems by adding missing LM75 defines + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit ebb86c4ecd37a7701358284e497ca4c6483c7cc5 +Author: Stefan Roese <sr@denx.de> +Date: Wed Jul 30 09:59:51 2008 +0200 + + cmd_bootm.c: Fix problem with '#if (CONFIG_CMD_USB)' + + A recent patch used '#if (CONFIG_CMD_USB)' instead of + '#if defined(CONFIG_CMD_USB)'. This patch fixes this problem and makes + common/bootm.c compile again. + + Signed-off-by: Stefan Roese <sr@denx.de> + Acked-by: Markus Klotzbuecher <mk@denx.de> + +commit 2cb9080427fe641dcb71da46cd0634dd406f37ed +Author: Kyungmin Park <kmpark@infradead.org> +Date: Tue Jul 22 08:01:43 2008 +0900 + + Remove unused I2C at apollon board + + There are no I2C devices on this board. + + Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> + +commit 3c95960e526b3b026da20201db64526f46faf14b +Author: Wolfgang Denk <wd@denx.de> +Date: Thu Jul 31 10:12:09 2008 +0200 + + at91rm9200dk, csb637: fix NAND related build problems + + Tried fixing NAND support for the at91rm9200dk board; untested. + Disabled NAND support in the csb637 board config file. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 09d318a8bb1444ec92e31cafcdba877eb9409e58 +Author: Kumar Gala <galak@kernel.crashing.org> +Date: Tue Jul 29 12:23:49 2008 -0500 + + fsl_i2c: Use timebase timer functions instead of get_timer() + + The current implementation of get_timer() is only really useful after we + have relocated u-boot to memory. The i2c code is used before that as part + of the SPD DDR setup. + + We actually have a bug when using the get_timer() code before relocation + because the .bss hasn't been setup and thus we could be reading/writing + a random location (probably in flash). + + Signed-off-by: Kumar Gala <galak@kernel.crashing.org> + +commit 4fc72a0d6ca85070a5e90d76cc5a853526ac09c4 +Author: Frank Svendsbøe <frank.svendsboe@gmail.com> +Date: Tue Jul 29 14:49:31 2008 +0200 + + Adder8xx: Fix CFG_MONITOR_LEN + + Due to increased space usage, U-Boot can no longer be stored in three sectors. + The current U-Boot use just over three flash sectors (197k), and U-Boot will + become corrupt after saving environment variables. This patch adds another 64k + to CFG_MONITOR_LEN. + + Signed-off-by: Frank E. Svendsbøe <frank.svendsboe@gmail.com> + +commit a4c59ad4a21140550ada6f97690d2527c4146ce5 +Author: Kyungmin Park <kmpark@infradead.org> +Date: Tue Jul 29 08:47:57 2008 +0900 + + Add OneNAND IPL related files to gitignore + + Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> + +commit 8d87589e8e874df7120a3d9667f051bc33bac250 +Author: Rafal Jaworowski <raj@semihalf.com> +Date: Mon Jul 28 20:38:25 2008 +0200 + + API: Teach the storage layer about SATA and MMC options. + + Signed-off-by: Rafal Czubak <rcz@semihalf.com> + Acked-by: Rafal Jaworowski <raj@semihalf.com> + +commit 6b73b754f782e1ecce5048bf20b22ce56a07a5b8 +Author: Rafal Jaworowski <raj@semihalf.com> +Date: Mon Jul 28 20:37:48 2008 +0200 + + API: Dump contents of sector 0 in the demo application. + + Signed-off-by: Rafal Czubak <rcz@semihalf.com> + Acked-by: Rafal Jaworowski <raj@semihalf.com> + +commit 13ca6305f2eba49c175f6370c35286141059c789 +Author: Rafal Jaworowski <raj@semihalf.com> +Date: Mon Jul 28 20:37:10 2008 +0200 + + API: Correct storage enumeration routine, other minor fixes in API storage area. + + Signed-off-by: Rafal Czubak <rcz@semihalf.com> + Acked-by: Rafal Jaworowski <raj@semihalf.com> + +commit 05c7fe0f049b1c9eb9a1992f27e5e350d865f4a8 +Author: Rafal Jaworowski <raj@semihalf.com> +Date: Mon Jul 28 20:36:19 2008 +0200 + + API: Fix compilation warnings in api_examples/demo.c. + + Signed-off-by: Rafal Czubak <rcz@semihalf.com> + +commit c14eefcc48212af2f3314809605698dd8393a90a +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Sun Jul 27 17:09:43 2008 +0200 + + Fix more printf() format warnings + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 936897d4d1365452bbbdf8430db5e7769ef08d38 +Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> +Date: Fri Jul 25 15:18:16 2008 +0200 + + Fix remaining CFG_CMD_ define, ifdef and comments + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + +commit 5d1d00fb36005482e1803a00ddc46efa11d719af +Author: Stefano Babic <sbabic@denx.de> +Date: Fri Jul 25 08:57:40 2008 +0200 + + Add include for config.h in command.h. + + Because the cmd_tbl_s structure depends on the configuration file, it + must be assured that config.h is included before the structure is + evaluated by the compiler. If this is not certain, it could happen + that the compiler generates structures of different size, depending + on the fact if the source file includes <config.h> before or after + <command.h>. + + The effect is that u-boot crashes when tries to relocate the command + table (for ppc) or try to access to the command table for other + architectures. + + The problem can happen on board-depending commands. All general + commands under /common are unaffected, because they include already + config.h before command.h. + + Signed-off-by: Stefano Babic <sbabic@denx.de> + +commit 2dacb734bac9dba1db9e704d3e0b200ef521c79a +Author: Scott Wood <scottwood@freescale.com> +Date: Wed Jul 23 13:16:06 2008 -0500 + + NAND: $(obj)-qualify ecc.h in kilauea NAND boot Makefile. + + This fixes building out-of-tree. + + Signed-off-by: Scott Wood <scottwood@freescale.com> + +commit 36d59bd9da9e15d19b867b48449408830f4e2ad5 +Author: Heiko Schocher <hs@denx.de> +Date: Wed Jul 23 07:30:46 2008 +0200 + + Fix warnings if compiling with IDE support. + + cmd_ide.c:827: Warnung: weak declaration of `ide_outb' after first use results in unspecified behavior + cmd_ide.c:839: Warnung: weak declaration of `ide_inb' after first use results in unspecified behavior + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit 7610db17fd4d59c51d825488526d85ede2f06767 +Author: Adrian Filipi <adrian.filipi@eurotech.com> +Date: Tue Jul 22 14:28:11 2008 -0400 + + Removed support for the adsvix board. + + Support for the adsvix was originally provided by Applied Data + Systems (ADS), inc., now EuroTech, Inc. + The board never shipped aside from some sample boards. + + Signed-off-by: Adrian Filipi <adrian.filipi@eurotech.com> + +commit f96b44cef897bd372beb86dde1b33637c119d84d +Author: Remy Bohmer <linux@bohmer.net> +Date: Tue Jul 22 16:22:11 2008 +0200 + + ARM: set GD_FLG_RELOC for boards skipping relocation to RAM + + If CONFIG_SKIP_RELOCATE_UBOOT is set the flag GD_FLG_RELOC is usually + never set, because relocation to RAM is actually never done by U-boot + itself. However, several pieces of code check if this flag is set at + some time. + + So, to make sure this flag is set on boards skipping relocation, this + is added to the initialisation of U-boot at a moment where it is safe + to do so. + + Signed-off-by: Remy Bohmer <linux@bohmer.net> + +commit e4dafff86f289b5677143a3e41da7b45c6d27fc7 +Author: Timur Tabi <timur@freescale.com> +Date: Mon Jul 21 14:26:23 2008 -0500 + + fsl-i2c: fix writes to data segment before relocation + + Prevent i2c_init() in fsl_i2c.c from writing to the data segment before + relocation. Commit d8c82db4 added the ability for i2c_init() to program the + I2C bus speed and save the value in i2c_bus_speed[], which is a global + variable. It is an error to write to the data segment before relocation, + which is what i2c_init() does when it stores the bus speed in i2c_bus_speed[]. + + Signed-off-by: Timur Tabi <timur@freescale.com> + +commit dbd32387920e5ad6f9dd58a7b5012bbabe2a6a21 +Author: Wolfgang Ocker <weo@reccoware.de> +Date: Mon Jul 28 16:56:51 2008 +0200 + + mips: Fix baudrate divisor computation on alchemy cpus + + Use CFG_MIPS_TIMER_FREQ when computing the baudrate divisor + on alchemy cpus. + + Signed-off-by: Wolfgang Ocker <weo@reccoware.de> + Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> + +commit a229d291f33308ab7761d39f25fa1a53c0fc00a2 +Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> +Date: Wed Jul 23 10:55:46 2008 +0200 + + spi flash: Fix printf() format warnings + + Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> + +commit 252a5e0738bcafaf25f7fbb40f19a59abc2cb13e +Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> +Date: Wed Jul 23 10:55:31 2008 +0200 + + atmel_mci: Fix printf() format warnings + + Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> + +commit 7f4b009f4232d57084ce0ec5aeb3b57bccb08e4c +Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> +Date: Wed Jul 23 10:55:15 2008 +0200 + + avr32: Fix printf() format warnings + + Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> + +commit a79c3e8d9c31db25d5ca3ec8e08a97f323410dd4 +Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> +Date: Wed Jul 23 10:52:19 2008 +0200 + + avr32: asm/io.h needs asm/types.h + + map_physmem() takes a phys_addr_t as parameter. This type is defined in + asm/types.h, so we need to include that file. + + Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> + +commit 1953d128fd07f07d1c3810a28c0863ea64dae1b6 +Author: Michal Simek <monstr@monstr.eu> +Date: Thu Jul 17 12:25:46 2008 +0200 + + microblaze: Fix printf() format issues + + Signed-off-by: Michal Simek <monstr@monstr.eu> + +commit de2a07e534f18b1ca5f9869a4ef0604ca829cff0 +Author: Gururaja Hebbar K R <gururajakr@sanyo.co.in> +Date: Thu Jul 17 07:27:51 2008 +0530 + + Remove unused code from lib_arm/bootm.c + + Signed-off-by: Gururaja Hebbar <gururajakr@sanyo.co.in> + +commit ffbb5cb942e9856fa24e946977e0a60c64df04ab +Author: Detlev Zundel <dzu@denx.de> +Date: Wed Jul 16 18:56:45 2008 +0200 + + tqm85xx: Demystify 'DK: !!!' comment + + Signed-off-by: Detlev Zundel <dzu@denx.de> + +commit b2f44ba570f3a01113bbb745daf46f3858d22f53 +Author: Detlev Zundel <dzu@denx.de> +Date: Wed Jul 16 18:56:44 2008 +0200 + + 83xx/85xx/86xx: Add LTEDR local bus definitions + + Signed-off-by: Detlev Zundel <dzu@denx.de> + +commit f13f64cf42d5abec3e0f920233f6a7a61e7ae494 +Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> +Date: Wed Jul 16 16:22:32 2008 +0200 + + serial_xuartlite.c: fix compiler warnings + + Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> + Acked-by: Grant Likely <grant.likely@secretlab.ca> + +commit 86446d3a5d9d3ca81e85d1ccd3accaaae6f8e3c9 +Author: Stefan Roese <sr@denx.de> +Date: Fri Jul 18 11:03:35 2008 +0200 + + POST: Add disable interrupts in some of the missing CPU POST tests + + Some CPU POST tests did not disable the interrupts while running. This + seems to be necessary to protect this self modifying code. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 97a3bf268d096e0e97e54048448c35114edcf557 +Author: Stefan Roese <sr@denx.de> +Date: Fri Jul 18 10:43:24 2008 +0200 + + ide: Use CFG_64BIT_LBA instead of CFG_64BIT_STRTOUL + + This is needed for boards that define CFG_64BIT_STRTOUL but don't define + CFG_64BIT_LBA. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 0043ac55024963295fc79b39af85b6dc3b261e17 +Author: Niklaus Giger <niklaus.giger@netstal.com> +Date: Fri Jul 18 11:22:23 2008 +0200 + + POST PPC4xx/spr IVPR only if PPC440 + + The SPR IVPR register is only present (as far as I know) for + processors with a PPC440 core. + + Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> + Acked-by: Stefan Roese <sr@denx.de> + +commit 1092fbd64748dfa2e979b102611ece9bc5ec1855 +Author: Stefan Roese <sr@denx.de> +Date: Fri Jul 18 10:42:29 2008 +0200 + + ppc4xx: Enable 64bit printf format on 440/460 platforms + + This patch defines CFG_64BIT_VSPRINTF and CFG_64BIT_STRTOUL for all + 440/460 platforms. This may be needed since those platforms support + 36bit physical address space. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 66fe183b1dd9c7534605147a8ecfed1c02345ee5 +Author: Stefan Roese <sr@denx.de> +Date: Fri Jul 18 15:57:23 2008 +0200 + + ppc4xx: Fix incorrect MODTx setup for some DIMM configurations + + This patch fixes a problem with incorrect MODTx (On Die Termination) + setup for a configuration with multiple DIMM's and multiple ranks. + Without this change Katmai was unable to boot Linux with DDR2 frequency + >= 533MHz and mem>=3GB. With this patch Katmai successfully boots Linux + with DDR2 frequency = 640MHz and mem=4GB. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 340ccb260f21516be360745d5c5e3bd0657698df +Author: Sebastian Siewior <bigeasy@linutronix.de> +Date: Wed Jul 16 20:04:49 2008 +0200 + + cfi_flash: fix flash on BE machines with CFG_WRITE_SWAPPED_DATA + + This got broken by commits 93c56f212c + [cfi_flash: support of long cmd in U-boot.] + + That command needs to be in little endian format on BE machines + with CFG_WRITE_SWAPPED_DATA. Without this patch, the command 0xf0 + gets saved on stack as 0x00 00 00 f0 and 0x00 gets written into + the cmdbuf in case portwidth = chipwidth = 8bit. + + Cc: Alexey Korolev <akorolev@infradead.org> + Cc: Vasiliy Leonenko <vasiliy.leonenko@mail.ru> + Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de> + +commit 699f05125509249072a0b865c8d35520d97cd501 +Author: Wolfgang Denk <wd@denx.de> +Date: Tue Jul 15 22:22:44 2008 +0200 + + Prepare v1.3.4-rc1: Code cleanup, update CHANGELOG, sort Makefile + + Signed-off-by: Wolfgang Denk <wd@denx.de> + commit bcab74baa6b1b1c969038ab6f64a186239180405 Author: Hugo Villeneuve <hugo.villeneuve@lyrtech.com> Date: Tue Jul 15 11:23:02 2008 -0400 @@ -540,7 +540,6 @@ LIST_at91=" \ ######################################################################### LIST_pxa=" \ - adsvix \ cerf250 \ cradle \ csb226 \ @@ -24,7 +24,7 @@ VERSION = 1 PATCHLEVEL = 3 SUBLEVEL = 4 -EXTRAVERSION = -rc1 +EXTRAVERSION = -rc2 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) VERSION_FILE = $(obj)include/version_autogenerated.h @@ -346,10 +346,9 @@ $(U_BOOT_NAND): $(NAND_SPL) $(obj)u-boot.bin $(obj)include/autoconf.mk cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin $(ONENAND_IPL): $(VERSION_FILE) $(obj)include/autoconf.mk - $(MAKE) -C $(obj)onenand_ipl/board/$(BOARDDIR) all + $(MAKE) -C onenand_ipl/board/$(BOARDDIR) all $(U_BOOT_ONENAND): $(ONENAND_IPL) $(obj)u-boot.bin $(obj)include/autoconf.mk - $(MAKE) -C $(obj)onenand_ipl/board/$(BOARDDIR) all cat $(obj)onenand_ipl/onenand-ipl-2k.bin $(obj)u-boot.bin > $(obj)u-boot-onenand.bin cat $(obj)onenand_ipl/onenand-ipl-4k.bin $(obj)u-boot.bin > $(obj)u-boot-flexonenand.bin @@ -2595,9 +2594,6 @@ actux3_config : unconfig actux4_config : unconfig @$(MKCONFIG) $(@:_config=) arm ixp actux4 -adsvix_config : unconfig - @$(MKCONFIG) $(@:_config=) arm pxa adsvix - cerf250_config : unconfig @$(MKCONFIG) $(@:_config=) arm pxa cerf250 @@ -2664,6 +2660,7 @@ zylonite_config : apollon_config : unconfig @mkdir -p $(obj)include + @mkdir -p $(obj)onenand_ipl/board/apollon @echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h @$(MKCONFIG) $(@:_config=) arm arm1136 apollon NULL omap24xx @echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk diff --git a/api/api_storage.c b/api/api_storage.c index 7e63240..74391a5 100644 --- a/api/api_storage.c +++ b/api/api_storage.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2007 Semihalf + * (C) Copyright 2007-2008 Semihalf * * Written by: Rafal Jaworowski <raj@semihalf.com> * @@ -46,14 +46,15 @@ #define ENUM_USB 1 #define ENUM_SCSI 2 #define ENUM_MMC 3 -#define ENUM_MAX 4 +#define ENUM_SATA 4 +#define ENUM_MAX 5 struct stor_spec { int max_dev; int enum_started; int enum_ended; int type; /* "external" type: DT_STOR_{IDE,USB,etc} */ - char name[4]; + char *name; }; static struct stor_spec specs[ENUM_MAX] = { { 0, 0, 0, 0, "" }, }; @@ -68,12 +69,19 @@ void dev_stor_init(void) specs[ENUM_IDE].type = DEV_TYP_STOR | DT_STOR_IDE; specs[ENUM_IDE].name = "ide"; #endif -#if defined(CONFIG_CMD_USB) - specs[ENUM_USB].max_dev = USB_MAX_STOR_DEV; - specs[ENUM_USB].enum_started = 0; - specs[ENUM_USB].enum_ended = 0; - specs[ENUM_USB].type = DEV_TYP_STOR | DT_STOR_USB; - specs[ENUM_USB].name = "usb"; +#if defined(CONFIG_CMD_MMC) + specs[ENUM_MMC].max_dev = CFG_MMC_MAX_DEVICE; + specs[ENUM_MMC].enum_started = 0; + specs[ENUM_MMC].enum_ended = 0; + specs[ENUM_MMC].type = DEV_TYP_STOR | DT_STOR_MMC; + specs[ENUM_MMC].name = "mmc"; +#endif +#if defined(CONFIG_CMD_SATA) + specs[ENUM_SATA].max_dev = CFG_SATA_MAX_DEVICE; + specs[ENUM_SATA].enum_started = 0; + specs[ENUM_SATA].enum_ended = 0; + specs[ENUM_SATA].type = DEV_TYP_STOR | DT_STOR_SATA; + specs[ENUM_SATA].name = "sata"; #endif #if defined(CONFIG_CMD_SCSI) specs[ENUM_SCSI].max_dev = CFG_SCSI_MAX_DEVICE; @@ -82,6 +90,13 @@ void dev_stor_init(void) specs[ENUM_SCSI].type = DEV_TYP_STOR | DT_STOR_SCSI; specs[ENUM_SCSI].name = "scsi"; #endif +#if defined(CONFIG_CMD_USB) && defined(CONFIG_USB_STORAGE) + specs[ENUM_USB].max_dev = USB_MAX_STOR_DEV; + specs[ENUM_USB].enum_started = 0; + specs[ENUM_USB].enum_ended = 0; + specs[ENUM_USB].type = DEV_TYP_STOR | DT_STOR_USB; + specs[ENUM_USB].name = "usb"; +#endif } /* @@ -108,7 +123,10 @@ static int dev_stor_get(int type, int first, int *more, struct device_info *di) if (first) { di->cookie = (void *)get_dev(specs[type].name, 0); - found = 1; + if (di->cookie == NULL) + return 0; + else + found = 1; } else { for (i = 0; i < specs[type].max_dev; i++) @@ -123,7 +141,10 @@ static int dev_stor_get(int type, int first, int *more, struct device_info *di) } di->cookie = (void *)get_dev(specs[type].name, i); - found = 1; + if (di->cookie == NULL) + return 0; + else + found = 1; /* provide hint if there are more devices in * this group to enumerate */ @@ -360,7 +381,7 @@ lbasize_t dev_read_stor(void *cookie, void *buf, lbasize_t len, lbastart_t start return 0; if ((dd->block_read) == NULL) { - debugf("no block_read() for device 0x%08x\n"); + debugf("no block_read() for device 0x%08x\n", cookie); return 0; } diff --git a/api_examples/demo.c b/api_examples/demo.c index eae9712..69ac318 100644 --- a/api_examples/demo.c +++ b/api_examples/demo.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2007 Semihalf + * (C) Copyright 2007-2008 Semihalf * * Written by: Rafal Jaworowski <raj@semihalf.com> * @@ -31,13 +31,15 @@ #define errf(fmt, args...) do { printf("ERROR @ %s(): ", __func__); printf(fmt, ##args); } while (0) -void test_dump_si(struct sys_info *); +#define BUF_SZ 2048 +#define WAIT_SECS 5 + +void test_dump_buf(void *, int); void test_dump_di(int); +void test_dump_si(struct sys_info *); void test_dump_sig(struct api_signature *); -char buf[2048]; - -#define WAIT_SECS 5 +static char buf[BUF_SZ]; int main(int argc, char *argv[]) { @@ -58,11 +60,12 @@ int main(int argc, char *argv[]) if (sig->version > API_SIG_VERSION) return -3; - printf("API signature found @%x\n", sig); + printf("API signature found @%x\n", (unsigned int)sig); test_dump_sig(sig); printf("\n*** Consumer API test ***\n"); - printf("syscall ptr 0x%08x@%08x\n", syscall_ptr, &syscall_ptr); + printf("syscall ptr 0x%08x@%08x\n", (unsigned int)syscall_ptr, + (unsigned int)&syscall_ptr); /* console activities */ ub_putc('B'); @@ -125,11 +128,17 @@ int main(int argc, char *argv[]) if (i == devs_no) printf("No storage devices available\n"); else { + memset(buf, 0, BUF_SZ); + if ((rv = ub_dev_open(i)) != 0) errf("open device %d error %d\n", i, rv); - else if ((rv = ub_dev_read(i, &buf, 200, 20)) != 0) + + else if ((rv = ub_dev_read(i, buf, 1, 0)) != 0) errf("could not read from device %d, error %d\n", i, rv); + printf("Sector 0 dump (512B):\n"); + test_dump_buf(buf, 512); + ub_dev_close(i); } @@ -180,7 +189,7 @@ void test_dump_sig(struct api_signature *sig) printf("signature:\n"); printf(" version\t= %d\n", sig->version); printf(" checksum\t= 0x%08x\n", sig->checksum); - printf(" sc entry\t= 0x%08x\n", sig->syscall); + printf(" sc entry\t= 0x%08x\n", (unsigned int)sig->syscall); } void test_dump_si(struct sys_info *si) @@ -188,9 +197,9 @@ void test_dump_si(struct sys_info *si) int i; printf("sys info:\n"); - printf(" clkbus\t= 0x%08x\n", si->clk_bus); - printf(" clkcpu\t= 0x%08x\n", si->clk_cpu); - printf(" bar\t\t= 0x%08x\n", si->bar); + printf(" clkbus\t= 0x%08x\n", (unsigned int)si->clk_bus); + printf(" clkcpu\t= 0x%08x\n", (unsigned int)si->clk_cpu); + printf(" bar\t\t= 0x%08x\n", (unsigned int)si->bar); printf("---\n"); for (i = 0; i < si->mr_no; i++) { @@ -217,23 +226,56 @@ void test_dump_si(struct sys_info *si) } } -static char * test_stor_typ(int type) +static char *test_stor_typ(int type) { if (type & DT_STOR_IDE) return "IDE"; + if (type & DT_STOR_MMC) + return "MMC"; + + if (type & DT_STOR_SATA) + return "SATA"; + if (type & DT_STOR_SCSI) return "SCSI"; if (type & DT_STOR_USB) return "USB"; - if (type & DT_STOR_MMC); - return "MMC"; - return "Unknown"; } +void test_dump_buf(void *buf, int len) +{ + int i; + int line_counter = 0; + int sep_flag = 0; + int addr = 0; + + printf("%07x:\t", addr); + + for (i = 0; i < len; i++) { + if (line_counter++ > 15) { + line_counter = 0; + sep_flag = 0; + addr += 16; + i--; + printf("\n%07x:\t", addr); + continue; + } + + if (sep_flag++ > 1) { + sep_flag = 1; + printf(" "); + } + + printf("%02x", *((char *)buf++)); + } + + printf("\n"); +} + void test_dump_di(int handle) { int i; @@ -252,7 +294,7 @@ void test_dump_di(int handle) } else if (di->type & DEV_TYP_STOR) { printf(" type\t\t= %s\n", test_stor_typ(di->type)); - printf(" blk size\t\t= %d\n", di->di_stor.block_size); - printf(" blk count\t\t= %d\n", di->di_stor.block_count); + printf(" blk size\t\t= %d\n", (unsigned int)di->di_stor.block_size); + printf(" blk count\t\t= %d\n", (unsigned int)di->di_stor.block_count); } } diff --git a/board/adsvix/Makefile b/board/adsvix/Makefile deleted file mode 100644 index 05601b4..0000000 --- a/board/adsvix/Makefile +++ /dev/null @@ -1,51 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).a - -COBJS := adsvix.o pcmcia.o -SOBJS := lowlevel_init.o pxavoltage.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/adsvix/adsvix.c b/board/adsvix/adsvix.c deleted file mode 100644 index c430d63..0000000 --- a/board/adsvix/adsvix.c +++ /dev/null @@ -1,75 +0,0 @@ -/* - * (C) Copyright 2004 - * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net - * - * (C) Copyright 2002 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* ------------------------------------------------------------------------- */ - -/* - * Miscelaneous platform dependent initialisations - */ - -int board_init (void) -{ - /* memory and cpu-speed are setup before relocation */ - /* so we do _nothing_ here */ - - /* arch number of ADSVIX-Board */ - gd->bd->bi_arch_number = 620; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0xa000003c; - - return 0; -} - -int board_late_init(void) -{ - setenv("stdout", "serial"); - setenv("stderr", "serial"); - return 0; -} - - -int dram_init (void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - gd->bd->bi_dram[1].start = PHYS_SDRAM_2; - gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; - gd->bd->bi_dram[2].start = PHYS_SDRAM_3; - gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE; - gd->bd->bi_dram[3].start = PHYS_SDRAM_4; - gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE; - - return 0; -} diff --git a/board/adsvix/config.mk b/board/adsvix/config.mk deleted file mode 100644 index 98be4eb..0000000 --- a/board/adsvix/config.mk +++ /dev/null @@ -1 +0,0 @@ -TEXT_BASE = 0xa1700000 diff --git a/board/adsvix/lowlevel_init.S b/board/adsvix/lowlevel_init.S deleted file mode 100644 index 8dea71c..0000000 --- a/board/adsvix/lowlevel_init.S +++ /dev/null @@ -1,466 +0,0 @@ -/* - * This was originally from the Lubbock u-boot port. - * - * Most of this taken from Redboot hal_platform_setup.h with cleanup - * - * NOTE: I haven't clean this up considerably, just enough to get it - * running. See hal_platform_setup.h for the source. See - * board/cradle/lowlevel_init.S for another PXA250 setup that is - * much cleaner. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <version.h> -#include <asm/arch/pxa-regs.h> - -/* wait for coprocessor write complete */ - .macro CPWAIT reg - mrc p15,0,\reg,c2,c0,0 - mov \reg,\reg - sub pc,pc,#4 - .endm - - -/* - * Memory setup - */ - -.globl lowlevel_init -lowlevel_init: - - /* Set up GPIO pins first ----------------------------------------- */ - - ldr r0, =GPSR0 - ldr r1, =CFG_GPSR0_VAL - str r1, [r0] - - ldr r0, =GPSR1 - ldr r1, =CFG_GPSR1_VAL - str r1, [r0] - - ldr r0, =GPSR2 - ldr r1, =CFG_GPSR2_VAL - str r1, [r0] - - ldr r0, =GPSR3 - ldr r1, =CFG_GPSR3_VAL - str r1, [r0] - - ldr r0, =GPCR0 - ldr r1, =CFG_GPCR0_VAL - str r1, [r0] - - ldr r0, =GPCR1 - ldr r1, =CFG_GPCR1_VAL - str r1, [r0] - - ldr r0, =GPCR2 - ldr r1, =CFG_GPCR2_VAL - str r1, [r0] - - ldr r0, =GPCR3 - ldr r1, =CFG_GPCR3_VAL - str r1, [r0] - - ldr r0, =GPDR0 - ldr r1, =CFG_GPDR0_VAL - str r1, [r0] - - ldr r0, =GPDR1 - ldr r1, =CFG_GPDR1_VAL - str r1, [r0] - - ldr r0, =GPDR2 - ldr r1, =CFG_GPDR2_VAL - str r1, [r0] - - ldr r0, =GPDR3 - ldr r1, =CFG_GPDR3_VAL - str r1, [r0] - - ldr r0, =GAFR0_L - ldr r1, =CFG_GAFR0_L_VAL - str r1, [r0] - - ldr r0, =GAFR0_U - ldr r1, =CFG_GAFR0_U_VAL - str r1, [r0] - - ldr r0, =GAFR1_L - ldr r1, =CFG_GAFR1_L_VAL - str r1, [r0] - - ldr r0, =GAFR1_U - ldr r1, =CFG_GAFR1_U_VAL - str r1, [r0] - - ldr r0, =GAFR2_L - ldr r1, =CFG_GAFR2_L_VAL - str r1, [r0] - - ldr r0, =GAFR2_U - ldr r1, =CFG_GAFR2_U_VAL - str r1, [r0] - - ldr r0, =GAFR3_L - ldr r1, =CFG_GAFR3_L_VAL - str r1, [r0] - - ldr r0, =GAFR3_U - ldr r1, =CFG_GAFR3_U_VAL - str r1, [r0] - - ldr r0, =PSSR /* enable GPIO pins */ - ldr r1, =CFG_PSSR_VAL - str r1, [r0] - - /* ---------------------------------------------------------------- */ - /* Enable memory interface */ - /* */ - /* The sequence below is based on the recommended init steps */ - /* detailed in the Intel PXA250 Operating Systems Developers Guide, */ - /* Chapter 10. */ - /* ---------------------------------------------------------------- */ - - /* ---------------------------------------------------------------- */ - /* Step 1: Wait for at least 200 microsedonds to allow internal */ - /* clocks to settle. Only necessary after hard reset... */ - /* FIXME: can be optimized later */ - /* ---------------------------------------------------------------- */ - - ldr r3, =OSCR /* reset the OS Timer Count to zero */ - mov r2, #0 - str r2, [r3] - ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ - /* so 0x300 should be plenty */ -1: - ldr r2, [r3] - cmp r4, r2 - bgt 1b - -mem_init: - - ldr r1, =MEMC_BASE /* get memory controller base addr. */ - - /* ---------------------------------------------------------------- */ - /* Step 2a: Initialize Asynchronous static memory controller */ - /* ---------------------------------------------------------------- */ - - /* MSC registers: timing, bus width, mem type */ - - /* MSC0: nCS(0,1) */ - ldr r2, =CFG_MSC0_VAL - str r2, [r1, #MSC0_OFFSET] - ldr r2, [r1, #MSC0_OFFSET] /* read back to ensure */ - /* that data latches */ - /* MSC1: nCS(2,3) */ - ldr r2, =CFG_MSC1_VAL - str r2, [r1, #MSC1_OFFSET] - ldr r2, [r1, #MSC1_OFFSET] - - /* MSC2: nCS(4,5) */ - ldr r2, =CFG_MSC2_VAL - str r2, [r1, #MSC2_OFFSET] - ldr r2, [r1, #MSC2_OFFSET] - - /* ---------------------------------------------------------------- */ - /* Step 2b: Initialize Card Interface */ - /* ---------------------------------------------------------------- */ - - /* MECR: Memory Expansion Card Register */ - ldr r2, =CFG_MECR_VAL - str r2, [r1, #MECR_OFFSET] - ldr r2, [r1, #MECR_OFFSET] - - /* MCMEM0: Card Interface slot 0 timing */ - ldr r2, =CFG_MCMEM0_VAL - str r2, [r1, #MCMEM0_OFFSET] - ldr r2, [r1, #MCMEM0_OFFSET] - - /* MCMEM1: Card Interface slot 1 timing */ - ldr r2, =CFG_MCMEM1_VAL - str r2, [r1, #MCMEM1_OFFSET] - ldr r2, [r1, #MCMEM1_OFFSET] - - /* MCATT0: Card Interface Attribute Space Timing, slot 0 */ - ldr r2, =CFG_MCATT0_VAL - str r2, [r1, #MCATT0_OFFSET] - ldr r2, [r1, #MCATT0_OFFSET] - - /* MCATT1: Card Interface Attribute Space Timing, slot 1 */ - ldr r2, =CFG_MCATT1_VAL - str r2, [r1, #MCATT1_OFFSET] - ldr r2, [r1, #MCATT1_OFFSET] - - /* MCIO0: Card Interface I/O Space Timing, slot 0 */ - ldr r2, =CFG_MCIO0_VAL - str r2, [r1, #MCIO0_OFFSET] - ldr r2, [r1, #MCIO0_OFFSET] - - /* MCIO1: Card Interface I/O Space Timing, slot 1 */ - ldr r2, =CFG_MCIO1_VAL - str r2, [r1, #MCIO1_OFFSET] - ldr r2, [r1, #MCIO1_OFFSET] - - /* ---------------------------------------------------------------- */ - /* Step 2c: Write FLYCNFG FIXME: what's that??? */ - /* ---------------------------------------------------------------- */ - ldr r2, =CFG_FLYCNFG_VAL - str r2, [r1, #FLYCNFG_OFFSET] - str r2, [r1, #FLYCNFG_OFFSET] - - /* ---------------------------------------------------------------- */ - /* Step 2d: Initialize Timing for Sync Memory (SDCLK0) */ - /* ---------------------------------------------------------------- */ - - /* Before accessing MDREFR we need a valid DRI field, so we set */ - /* this to power on defaults + DRI field. */ - - ldr r4, [r1, #MDREFR_OFFSET] - ldr r2, =0xFFF - bic r4, r4, r2 - - ldr r3, =CFG_MDREFR_VAL - and r3, r3, r2 - - orr r4, r4, r3 - str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ - - orr r4, r4, #MDREFR_K0RUN - orr r4, r4, #MDREFR_K0DB4 - orr r4, r4, #MDREFR_K0FREE - orr r4, r4, #MDREFR_K0DB2 - orr r4, r4, #MDREFR_K1DB2 - bic r4, r4, #MDREFR_K1FREE - bic r4, r4, #MDREFR_K2FREE - - str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ - ldr r4, [r1, #MDREFR_OFFSET] - - /* Note: preserve the mdrefr value in r4 */ - - - /* ---------------------------------------------------------------- */ - /* Step 3: Initialize Synchronous Static Memory (Flash/Peripherals) */ - /* ---------------------------------------------------------------- */ - - /* Initialize SXCNFG register. Assert the enable bits */ - - /* Write SXMRS to cause an MRS command to all enabled banks of */ - /* synchronous static memory. Note that SXLCR need not be written */ - /* at this time. */ - - ldr r2, =CFG_SXCNFG_VAL - str r2, [r1, #SXCNFG_OFFSET] - - /* ---------------------------------------------------------------- */ - /* Step 4: Initialize SDRAM */ - /* ---------------------------------------------------------------- */ - - bic r4, r4, #(MDREFR_K2FREE |MDREFR_K1FREE | MDREFR_K0FREE) - - orr r4, r4, #MDREFR_K1RUN - bic r4, r4, #MDREFR_K2DB2 - str r4, [r1, #MDREFR_OFFSET] - ldr r4, [r1, #MDREFR_OFFSET] - - bic r4, r4, #MDREFR_SLFRSH - str r4, [r1, #MDREFR_OFFSET] - ldr r4, [r1, #MDREFR_OFFSET] - - orr r4, r4, #MDREFR_E1PIN - str r4, [r1, #MDREFR_OFFSET] - ldr r4, [r1, #MDREFR_OFFSET] - - nop - nop - - - /* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to */ - /* configure but not enable each SDRAM partition pair. */ - - ldr r4, =CFG_MDCNFG_VAL - bic r4, r4, #(MDCNFG_DE0|MDCNFG_DE1) - bic r4, r4, #(MDCNFG_DE2|MDCNFG_DE3) - - str r4, [r1, #MDCNFG_OFFSET] /* write back MDCNFG */ - ldr r4, [r1, #MDCNFG_OFFSET] - - - /* Step 4e: Wait for the clock to the SDRAMs to stabilize, */ - /* 100..200 µsec. */ - - ldr r3, =OSCR /* reset the OS Timer Count to zero */ - mov r2, #0 - str r2, [r3] - ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ - /* so 0x300 should be plenty */ -1: - ldr r2, [r3] - cmp r4, r2 - bgt 1b - - - /* Step 4f: Trigger a number (usually 8) refresh cycles by */ - /* attempting non-burst read or write accesses to disabled */ - /* SDRAM, as commonly specified in the power up sequence */ - /* documented in SDRAM data sheets. The address(es) used */ - /* for this purpose must not be cacheable. */ - - ldr r3, =CFG_DRAM_BASE - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - str r2, [r3] - - - /* Step 4g: Write MDCNFG with enable bits asserted */ - /* (MDCNFG:DEx set to 1). */ - - ldr r3, [r1, #MDCNFG_OFFSET] - mov r4, r3 - orr r3, r3, #MDCNFG_DE0 - str r3, [r1, #MDCNFG_OFFSET] - mov r0, r3 - - /* Step 4h: Write MDMRS. */ - - ldr r2, =CFG_MDMRS_VAL - str r2, [r1, #MDMRS_OFFSET] - - /* enable APD */ - ldr r3, [r1, #MDREFR_OFFSET] - orr r3, r3, #MDREFR_APD - str r3, [r1, #MDREFR_OFFSET] - - /* We are finished with Intel's memory controller initialisation */ - -setvoltage: - - mov r10, lr - bl initPXAvoltage /* In case the board is rebooting with a */ - mov lr, r10 /* low voltage raise it up to a good one. */ - -wakeup: - /* Are we waking from sleep? */ - ldr r0, =RCSR - ldr r1, [r0] - and r1, r1, #(RCSR_GPR | RCSR_SMR | RCSR_WDR | RCSR_HWR) - str r1, [r0] - teq r1, #RCSR_SMR - - bne initirqs - - ldr r0, =PSSR - mov r1, #PSSR_PH - str r1, [r0] - - /* if so, resume at PSPR */ - ldr r0, =PSPR - ldr r1, [r0] - mov pc, r1 - - /* ---------------------------------------------------------------- */ - /* Disable (mask) all interrupts at interrupt controller */ - /* ---------------------------------------------------------------- */ - -initirqs: - - mov r1, #0 /* clear int. level register (IRQ, not FIQ) */ - ldr r2, =ICLR - str r1, [r2] - - ldr r2, =ICMR /* mask all interrupts at the controller */ - str r1, [r2] - - /* ---------------------------------------------------------------- */ - /* Clock initialisation */ - /* ---------------------------------------------------------------- */ - -initclks: - - /* Disable the peripheral clocks, and set the core clock frequency */ - - /* Turn Off on-chip peripheral clocks (except for memory) */ - /* for re-configuration. */ - ldr r1, =CKEN - ldr r2, =CFG_CKEN - str r2, [r1] - - /* ... and write the core clock config register */ - ldr r2, =CFG_CCCR - ldr r1, =CCCR - str r2, [r1] - - /* Turn on turbo mode */ - mrc p14, 0, r2, c6, c0, 0 - orr r2, r2, #0xB /* Turbo, Fast-Bus, Freq change**/ - mcr p14, 0, r2, c6, c0, 0 - - /* Re-write MDREFR */ - ldr r1, =MEMC_BASE - ldr r2, [r1, #MDREFR_OFFSET] - str r2, [r1, #MDREFR_OFFSET] -#ifdef RTC - /* enable the 32Khz oscillator for RTC and PowerManager */ - ldr r1, =OSCC - mov r2, #OSCC_OON - str r2, [r1] - - /* NOTE: spin here until OSCC.OOK get set, meaning the PLL */ - /* has settled. */ -60: - ldr r2, [r1] - ands r2, r2, #1 - beq 60b -#else -#error "RTC not defined" -#endif - - /* Interrupt init: Mask all interrupts */ - ldr r0, =ICMR /* enable no sources */ - mov r1, #0 - str r1, [r0] - /* FIXME */ - -#ifdef NODEBUG - /*Disable software and data breakpoints */ - mov r0,#0 - mcr p15,0,r0,c14,c8,0 /* ibcr0 */ - mcr p15,0,r0,c14,c9,0 /* ibcr1 */ - mcr p15,0,r0,c14,c4,0 /* dbcon */ - - /*Enable all debug functionality */ - mov r0,#0x80000000 - mcr p14,0,r0,c10,c0,0 /* dcsr */ -#endif - - /* ---------------------------------------------------------------- */ - /* End lowlevel_init */ - /* ---------------------------------------------------------------- */ - -endlowlevel_init: - - mov pc, lr diff --git a/board/adsvix/pcmcia.c b/board/adsvix/pcmcia.c deleted file mode 100644 index ba5be01..0000000 --- a/board/adsvix/pcmcia.c +++ /dev/null @@ -1,67 +0,0 @@ -/* - * (C) Copyright 2004 - * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/arch/pxa-regs.h> - -void pcmcia_power_on(void) -{ -#if 0 - if (!(GPLR(20) & GPIO_bit(20))) { /* 3.3V */ - GPCR(81) = GPIO_bit(81); - GPSR(82) = GPIO_bit(82); - } - else if (!(GPLR(21) & GPIO_bit(21))) { /* 5.0V */ - GPCR(81) = GPIO_bit(81); - GPCR(82) = GPIO_bit(82); - } -#else -#warning "Board will only supply 5V, wait for next HW spin for selectable power" - /* 5.0V */ - GPCR(81) = GPIO_bit(81); - GPCR(82) = GPIO_bit(82); -#endif - - udelay(300000); - - /* reset the card */ - GPSR(52) = GPIO_bit(52); - - /* enable PCMCIA */ - GPCR(83) = GPIO_bit(83); - - /* clear reset */ - udelay(10); - GPCR(52) = GPIO_bit(52); - - udelay(20000); -} - -void pcmcia_power_off(void) -{ - /* 0V */ - GPSR(81) = GPIO_bit(81); - GPSR(82) = GPIO_bit(82); - /* disable PCMCIA */ - GPSR(83) = GPIO_bit(83); -} diff --git a/board/adsvix/pxavoltage.S b/board/adsvix/pxavoltage.S deleted file mode 100644 index 2fe1cab..0000000 --- a/board/adsvix/pxavoltage.S +++ /dev/null @@ -1,230 +0,0 @@ -/* - * (C) Copyright 2004 - * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <asm/arch/pxa-regs.h> - -#define LTC1663_ADDR 0x20 - -#define LTC1663_SY 0x01 /* Sync ACK */ -#define LTC1663_SD 0x04 /* shutdown */ -#define LTC1663_BG 0x04 /* Internal Voltage Ref */ - -#define VOLT_1_55 18 /* DAC value for 1.55V */ - - .global initPXAvoltage - -@ Set the voltage to 1.55V early in the boot process so we can run -@ at a high clock speed and boot quickly. Note that this is necessary -@ because the reset button does not reset the CPU voltage, so if the -@ voltage was low (say 0.85V) then the CPU would crash without this -@ routine - -@ This routine clobbers r0-r4 - -initializei2c: - - ldr r2, =CKEN - ldr r3, [r2] - orr r3, r3, #CKEN15_PWRI2C - str r3, [r2] - - ldr r2, =PCFR - ldr r3, [r2] - orr r3, r3, #PCFR_PI2C_EN - str r3, [r2] - - /* delay for about 250msec - */ - ldr r3, =OSCR - mov r2, #0 - str r2, [r3] - ldr r1, =0xC0000 - -1: - ldr r2, [r3] - cmp r1, r2 - bgt 1b - ldr r0, =PWRICR - ldr r1, [r0] - bic r1, r1, #(ICR_MA | ICR_START | ICR_STOP) - str r1, [r0] - - orr r1, r1, #ICR_UR - str r1, [r0] - - ldr r2, =PWRISR - ldr r3, =0x7ff - str r3, [r2] - - bic r1, r1, #ICR_UR - str r1, [r0] - - mov r1, #(ICR_GCD | ICR_SCLE) - str r1, [r0] - - orr r1, r1, #ICR_IUE - str r1, [r0] - - orr r1, r1, #ICR_FM - str r1, [r0] - - /* delay for about 1msec - */ - ldr r3, =OSCR - mov r2, #0 - str r2, [r3] - ldr r1, =0xC00 - -1: - ldr r2, [r3] - cmp r1, r2 - bgt 1b - mov pc, lr - -sendbytei2c: - ldr r3, =PWRIDBR - str r0, [r3] - ldr r3, =PWRICR - ldr r0, [r3] - orr r0, r0, r1 - bic r0, r0, r2 - str r0, [r3] - orr r0, r0, #ICR_TB - str r0, [r3] - - mov r2, #0x100000 - -waitfortxemptyi2c: - - ldr r0, =PWRISR - ldr r1, [r0] - - /* take it from the top if we don't get empty after a while */ - subs r2, r2, #1 - moveq lr, r4 - beq initPXAvoltage - - tst r1, #ISR_ITE - - beq waitfortxemptyi2c - - orr r1, r1, #ISR_ITE - str r1, [r0] - - mov pc, lr - -initPXAvoltage: - - mov r4, lr - - bl setleds - - bl initializei2c - - bl setleds - - /* now send the real message to set the correct voltage */ - ldr r0, =LTC1663_ADDR - mov r0, r0, LSL #1 - mov r1, #ICR_START - ldr r2, =(ICR_STOP | ICR_ALDIE | ICR_ACKNAK) - bl sendbytei2c - - bl setleds - - mov r0, #LTC1663_BG - mov r1, #0 - mov r2, #(ICR_STOP | ICR_START) - bl sendbytei2c - - bl setleds - - ldr r0, =VOLT_1_55 - and r0, r0, #0xff - mov r1, #0 - mov r2, #(ICR_STOP | ICR_START) - bl sendbytei2c - - bl setleds - - ldr r0, =VOLT_1_55 - mov r0, r0, ASR #8 - and r0, r0, #0xff - mov r1, #ICR_STOP - mov r2, #ICR_START - bl sendbytei2c - - bl setleds - - @ delay a little for the volatage to stablize - ldr r3, =OSCR - mov r2, #0 - str r2, [r3] - ldr r1, =0xC0 - -1: - ldr r2, [r3] - cmp r1, r2 - bgt 1b - mov pc, r4 - -setleds: - mov pc, lr - - ldr r5, =0x40e00058 - ldr r3, [r5] - bic r3, r3, #0x3 - str r3, [r5] - ldr r5, =0x40e0000c - ldr r3, [r5] - orr r3, r3, #0x00010000 - str r3, [r5] - - @ inner loop - mov r0, #0x2 -1: - - ldr r5, =0x40e00018 - mov r3, #0x00010000 - str r3, [r5] - - @ outer loop - mov r3, #0x00F00000 -2: - subs r3, r3, #1 - bne 2b - - ldr r5, =0x40e00024 - mov r3, #0x00010000 - str r3, [r5] - - @ outer loop - mov r3, #0x00F00000 -3: - subs r3, r3, #1 - bne 3b - - subs r0, r0, #1 - bne 1b - - mov pc, lr diff --git a/board/adsvix/u-boot.lds b/board/adsvix/u-boot.lds deleted file mode 100644 index 14d264a..0000000 --- a/board/adsvix/u-boot.lds +++ /dev/null @@ -1,56 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -ENTRY(_start) -SECTIONS -{ - . = 0x00000000; - - . = ALIGN(4); - .text : - { - cpu/pxa/start.o (.text) - *(.text) - } - - . = ALIGN(4); - .rodata : { *(.rodata) } - - . = ALIGN(4); - .data : { *(.data) } - - . = ALIGN(4); - .got : { *(.got) } - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - . = ALIGN(4); - __bss_start = .; - .bss (NOLOAD) : { *(.bss) } - _end = .; -} diff --git a/board/atmel/atngw100/atngw100.c b/board/atmel/atngw100/atngw100.c index f2c3e79..4ead533 100644 --- a/board/atmel/atngw100/atngw100.c +++ b/board/atmel/atngw100/atngw100.c @@ -81,7 +81,7 @@ phys_size_t initdram(int board_type) unmap_physmem(sdram_base, EBI_SDRAM_SIZE); if (expected_size != actual_size) - printf("Warning: Only %u of %u MiB SDRAM is working\n", + printf("Warning: Only %lu of %lu MiB SDRAM is working\n", actual_size >> 20, expected_size >> 20); return actual_size; diff --git a/board/atmel/atstk1000/atstk1000.c b/board/atmel/atstk1000/atstk1000.c index 6371e2d..d284fc1 100644 --- a/board/atmel/atstk1000/atstk1000.c +++ b/board/atmel/atstk1000/atstk1000.c @@ -104,7 +104,7 @@ phys_size_t initdram(int board_type) unmap_physmem(sdram_base, EBI_SDRAM_SIZE); if (expected_size != actual_size) - printf("Warning: Only %u of %u MiB SDRAM is working\n", + printf("Warning: Only %lu of %lu MiB SDRAM is working\n", actual_size >> 20, expected_size >> 20); return actual_size; diff --git a/board/atmel/atstk1000/flash.c b/board/atmel/atstk1000/flash.c index 12537f3..e2bfd4a 100644 --- a/board/atmel/atstk1000/flash.c +++ b/board/atmel/atstk1000/flash.c @@ -70,7 +70,7 @@ unsigned long flash_init(void) void flash_print_info(flash_info_t *info) { - printf("Flash: Vendor ID: 0x%02x, Product ID: 0x%02x\n", + printf("Flash: Vendor ID: 0x%02lx, Product ID: 0x%02lx\n", info->flash_id >> 16, info->flash_id & 0xffff); printf("Size: %ld MB in %d sectors\n", info->size >> 10, info->sector_count); diff --git a/board/esd/common/flash.c b/board/esd/common/flash.c index dca10be..bda361e 100644 --- a/board/esd/common/flash.c +++ b/board/esd/common/flash.c @@ -22,7 +22,9 @@ */ #include <common.h> +#ifdef __PPC__ #include <ppc4xx.h> +#endif #include <asm/processor.h> flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ diff --git a/board/freescale/m5275evb/Makefile b/board/freescale/m5275evb/Makefile index f337a75..74c2528 100644 --- a/board/freescale/m5275evb/Makefile +++ b/board/freescale/m5275evb/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -OBJS = $(BOARD).o mii.o +COBJS = $(BOARD).o mii.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/freescale/mpc8540ads/u-boot.lds b/board/freescale/mpc8540ads/u-boot.lds index f200810..0e4f5a2 100644 --- a/board/freescale/mpc8540ads/u-boot.lds +++ b/board/freescale/mpc8540ads/u-boot.lds @@ -2,6 +2,8 @@ * (C) Copyright 2002,2003, Motorola,Inc. * Xianghua Xiao, X.Xiao@motorola.com. * + * Copyright 2008 Freescale Semiconductor, Inc. + * * See file CREDITS for list of people who contributed to this * project. * @@ -26,16 +28,6 @@ OUTPUT_ARCH(powerpc) __DYNAMIC = 0; */ SECTIONS { - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/mpc85xx/start.o (.bootpg) - } = 0xffff - /* Read-only sections, merged into text segment: */ . = + SIZEOF_HEADERS; .interp : { *(.interp) } @@ -62,17 +54,6 @@ SECTIONS .plt : { *(.plt) } .text : { - cpu/mpc85xx/start.o (.text) - cpu/mpc85xx/traps.o (.text) - cpu/mpc85xx/interrupts.o (.text) - cpu/mpc85xx/cpu_init.o (.text) - cpu/mpc85xx/cpu.o (.text) - cpu/mpc85xx/speed.o (.text) - cpu/mpc85xx/pci.o (.text) - common/dlmalloc.o (.text) - lib_generic/crc32.o (.text) - lib_ppc/extable.o (.text) - lib_generic/zlib.o (.text) *(.text) *(.fixup) *(.got1) @@ -134,6 +115,18 @@ SECTIONS . = ALIGN(256); __init_end = .; + .bootpg ADDR(.text) + 0x7f000 : + { + cpu/mpc85xx/start.o (.bootpg) + } = 0xffff + + .resetvec ADDR(.text) + 0x7fffc : + { + *(.resetvec) + } = 0xffff + + . = ADDR(.text) + 0x80000; + __bss_start = .; .bss (NOLOAD) : { @@ -142,6 +135,8 @@ SECTIONS *(.bss) *(COMMON) } + + . = ALIGN(4); _end = . ; PROVIDE (end = .); } diff --git a/board/freescale/mpc8541cds/u-boot.lds b/board/freescale/mpc8541cds/u-boot.lds index 5f4dcf0..1c583de 100644 --- a/board/freescale/mpc8541cds/u-boot.lds +++ b/board/freescale/mpc8541cds/u-boot.lds @@ -1,5 +1,5 @@ /* - * Copyright 2004 Freescale Semiconductor. + * Copyright 2004, 2008 Freescale Semiconductor. * * See file CREDITS for list of people who contributed to this * project. @@ -25,16 +25,6 @@ OUTPUT_ARCH(powerpc) __DYNAMIC = 0; */ SECTIONS { - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/mpc85xx/start.o (.bootpg) - } = 0xffff - /* Read-only sections, merged into text segment: */ . = + SIZEOF_HEADERS; .interp : { *(.interp) } @@ -61,18 +51,6 @@ SECTIONS .plt : { *(.plt) } .text : { - cpu/mpc85xx/start.o (.text) - cpu/mpc85xx/traps.o (.text) - cpu/mpc85xx/interrupts.o (.text) - cpu/mpc85xx/cpu_init.o (.text) - cpu/mpc85xx/cpu.o (.text) - drivers/net/tsec.o (.text) - cpu/mpc85xx/speed.o (.text) - cpu/mpc85xx/pci.o (.text) - common/dlmalloc.o (.text) - lib_generic/crc32.o (.text) - lib_ppc/extable.o (.text) - lib_generic/zlib.o (.text) *(.text) *(.fixup) *(.got1) @@ -134,6 +112,18 @@ SECTIONS . = ALIGN(256); __init_end = .; + .bootpg ADDR(.text) + 0x7f000 : + { + cpu/mpc85xx/start.o (.bootpg) + } = 0xffff + + .resetvec ADDR(.text) + 0x7fffc : + { + *(.resetvec) + } = 0xffff + + . = ADDR(.text) + 0x80000; + __bss_start = .; .bss (NOLOAD) : { @@ -142,6 +132,8 @@ SECTIONS *(.bss) *(COMMON) } + + . = ALIGN(4); _end = . ; PROVIDE (end = .); } diff --git a/board/freescale/mpc8544ds/u-boot.lds b/board/freescale/mpc8544ds/u-boot.lds index c66c69f..500e647 100644 --- a/board/freescale/mpc8544ds/u-boot.lds +++ b/board/freescale/mpc8544ds/u-boot.lds @@ -1,5 +1,5 @@ /* - * Copyright 2007 Freescale Semiconductor, Inc. + * Copyright 2007-2008 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -25,16 +25,6 @@ OUTPUT_ARCH(powerpc) __DYNAMIC = 0; */ SECTIONS { - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/mpc85xx/start.o (.bootpg) - } = 0xffff - /* Read-only sections, merged into text segment: */ . = + SIZEOF_HEADERS; .interp : { *(.interp) } @@ -61,17 +51,6 @@ SECTIONS .plt : { *(.plt) } .text : { - cpu/mpc85xx/start.o (.text) - cpu/mpc85xx/traps.o (.text) - cpu/mpc85xx/interrupts.o (.text) - cpu/mpc85xx/cpu_init.o (.text) - cpu/mpc85xx/cpu.o (.text) - cpu/mpc85xx/speed.o (.text) - common/dlmalloc.o (.text) - lib_generic/crc32.o (.text) - lib_ppc/extable.o (.text) - lib_generic/zlib.o (.text) - drivers/bios_emulator/atibios.o (.text) *(.text) *(.fixup) *(.got1) @@ -133,6 +112,18 @@ SECTIONS . = ALIGN(256); __init_end = .; + .bootpg ADDR(.text) + 0x7f000 : + { + cpu/mpc85xx/start.o (.bootpg) + } = 0xffff + + .resetvec ADDR(.text) + 0x7fffc : + { + *(.resetvec) + } = 0xffff + + . = ADDR(.text) + 0x80000; + __bss_start = .; .bss (NOLOAD) : { @@ -141,6 +132,8 @@ SECTIONS *(.bss) *(COMMON) } + + . = ALIGN(4); _end = . ; PROVIDE (end = .); } diff --git a/board/freescale/mpc8548cds/u-boot.lds b/board/freescale/mpc8548cds/u-boot.lds index eba7e8a..6b93395 100644 --- a/board/freescale/mpc8548cds/u-boot.lds +++ b/board/freescale/mpc8548cds/u-boot.lds @@ -1,5 +1,5 @@ /* - * Copyright 2004, 2007 Freescale Semiconductor. + * Copyright 2004, 2007-2008 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -25,16 +25,6 @@ OUTPUT_ARCH(powerpc) __DYNAMIC = 0; */ SECTIONS { - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/mpc85xx/start.o (.bootpg) - } = 0xffff - /* Read-only sections, merged into text segment: */ . = + SIZEOF_HEADERS; .interp : { *(.interp) } @@ -61,17 +51,6 @@ SECTIONS .plt : { *(.plt) } .text : { - cpu/mpc85xx/start.o (.text) - cpu/mpc85xx/traps.o (.text) - cpu/mpc85xx/interrupts.o (.text) - cpu/mpc85xx/cpu_init.o (.text) - cpu/mpc85xx/cpu.o (.text) - drivers/net/tsec.o (.text) - cpu/mpc85xx/speed.o (.text) - common/dlmalloc.o (.text) - lib_generic/crc32.o (.text) - lib_ppc/extable.o (.text) - lib_generic/zlib.o (.text) *(.text) *(.fixup) *(.got1) @@ -133,6 +112,18 @@ SECTIONS . = ALIGN(256); __init_end = .; + .bootpg ADDR(.text) + 0x7f000 : + { + cpu/mpc85xx/start.o (.bootpg) + } = 0xffff + + .resetvec ADDR(.text) + 0x7fffc : + { + *(.resetvec) + } = 0xffff + + . = ADDR(.text) + 0x80000; + __bss_start = .; .bss (NOLOAD) : { @@ -141,6 +132,8 @@ SECTIONS *(.bss) *(COMMON) } + + . = ALIGN(4); _end = . ; PROVIDE (end = .); } diff --git a/board/freescale/mpc8555cds/u-boot.lds b/board/freescale/mpc8555cds/u-boot.lds index 5f4dcf0..a18b3a7 100644 --- a/board/freescale/mpc8555cds/u-boot.lds +++ b/board/freescale/mpc8555cds/u-boot.lds @@ -1,5 +1,5 @@ /* - * Copyright 2004 Freescale Semiconductor. + * Copyright 2004, 2008 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -25,16 +25,6 @@ OUTPUT_ARCH(powerpc) __DYNAMIC = 0; */ SECTIONS { - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/mpc85xx/start.o (.bootpg) - } = 0xffff - /* Read-only sections, merged into text segment: */ . = + SIZEOF_HEADERS; .interp : { *(.interp) } @@ -61,18 +51,6 @@ SECTIONS .plt : { *(.plt) } .text : { - cpu/mpc85xx/start.o (.text) - cpu/mpc85xx/traps.o (.text) - cpu/mpc85xx/interrupts.o (.text) - cpu/mpc85xx/cpu_init.o (.text) - cpu/mpc85xx/cpu.o (.text) - drivers/net/tsec.o (.text) - cpu/mpc85xx/speed.o (.text) - cpu/mpc85xx/pci.o (.text) - common/dlmalloc.o (.text) - lib_generic/crc32.o (.text) - lib_ppc/extable.o (.text) - lib_generic/zlib.o (.text) *(.text) *(.fixup) *(.got1) @@ -134,6 +112,18 @@ SECTIONS . = ALIGN(256); __init_end = .; + .bootpg ADDR(.text) + 0x7f000 : + { + cpu/mpc85xx/start.o (.bootpg) + } = 0xffff + + .resetvec ADDR(.text) + 0x7fffc : + { + *(.resetvec) + } = 0xffff + + . = ADDR(.text) + 0x80000; + __bss_start = .; .bss (NOLOAD) : { @@ -142,6 +132,8 @@ SECTIONS *(.bss) *(COMMON) } + + . = ALIGN(4); _end = . ; PROVIDE (end = .); } diff --git a/board/freescale/mpc8560ads/u-boot.lds b/board/freescale/mpc8560ads/u-boot.lds index cb30ea9..0e4f5a2 100644 --- a/board/freescale/mpc8560ads/u-boot.lds +++ b/board/freescale/mpc8560ads/u-boot.lds @@ -1,7 +1,9 @@ /* - * (C) Copyright 2002,2003,Motorola,Inc. + * (C) Copyright 2002,2003, Motorola,Inc. * Xianghua Xiao, X.Xiao@motorola.com. * + * Copyright 2008 Freescale Semiconductor, Inc. + * * See file CREDITS for list of people who contributed to this * project. * @@ -26,16 +28,6 @@ OUTPUT_ARCH(powerpc) __DYNAMIC = 0; */ SECTIONS { - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/mpc85xx/start.o (.bootpg) - } = 0xffff - /* Read-only sections, merged into text segment: */ . = + SIZEOF_HEADERS; .interp : { *(.interp) } @@ -62,20 +54,6 @@ SECTIONS .plt : { *(.plt) } .text : { - cpu/mpc85xx/start.o (.text) - cpu/mpc85xx/commproc.o (.text) - cpu/mpc85xx/traps.o (.text) - cpu/mpc85xx/interrupts.o (.text) - cpu/mpc85xx/serial_scc.o (.text) - cpu/mpc85xx/ether_fcc.o (.text) - cpu/mpc85xx/cpu_init.o (.text) - cpu/mpc85xx/cpu.o (.text) - cpu/mpc85xx/speed.o (.text) - cpu/mpc85xx/spd_sdram.o (.text) - common/dlmalloc.o (.text) - lib_generic/crc32.o (.text) - lib_ppc/extable.o (.text) - lib_generic/zlib.o (.text) *(.text) *(.fixup) *(.got1) @@ -137,6 +115,18 @@ SECTIONS . = ALIGN(256); __init_end = .; + .bootpg ADDR(.text) + 0x7f000 : + { + cpu/mpc85xx/start.o (.bootpg) + } = 0xffff + + .resetvec ADDR(.text) + 0x7fffc : + { + *(.resetvec) + } = 0xffff + + . = ADDR(.text) + 0x80000; + __bss_start = .; .bss (NOLOAD) : { @@ -145,6 +135,8 @@ SECTIONS *(.bss) *(COMMON) } + + . = ALIGN(4); _end = . ; PROVIDE (end = .); } diff --git a/board/freescale/mpc8568mds/u-boot.lds b/board/freescale/mpc8568mds/u-boot.lds index 1b83834..9d245e4 100644 --- a/board/freescale/mpc8568mds/u-boot.lds +++ b/board/freescale/mpc8568mds/u-boot.lds @@ -1,5 +1,5 @@ /* - * Copyright 2004-2007 Freescale Semiconductor. + * Copyright 2004-2008 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -23,21 +23,8 @@ OUTPUT_ARCH(powerpc) /* Do we need any of these for elf? __DYNAMIC = 0; */ - SECTIONS { - /* ELIOR - From RAM: From FLASH: 0xFFFFFFFC*/ - .resetvec 0xFFFFFFFC: - { - *(.resetvec) - } = 0xffff - - /*(ELIOR - From RAM: From FLASH: 0xFFFFF000*/ - .bootpg 0xFFFFF000: - { - cpu/mpc85xx/start.o (.bootpg) - } = 0xffff - /* Read-only sections, merged into text segment: */ . = + SIZEOF_HEADERS; .interp : { *(.interp) } @@ -64,17 +51,6 @@ SECTIONS .plt : { *(.plt) } .text : { - cpu/mpc85xx/start.o (.text) - cpu/mpc85xx/traps.o (.text) - cpu/mpc85xx/interrupts.o (.text) - cpu/mpc85xx/cpu_init.o (.text) - cpu/mpc85xx/cpu.o (.text) - cpu/mpc85xx/speed.o (.text) - cpu/mpc85xx/pci.o (.text) - common/dlmalloc.o (.text) - lib_generic/crc32.o (.text) - lib_ppc/extable.o (.text) - lib_generic/zlib.o (.text) *(.text) *(.fixup) *(.got1) @@ -136,6 +112,18 @@ SECTIONS . = ALIGN(256); __init_end = .; + .bootpg ADDR(.text) + 0x7f000 : + { + cpu/mpc85xx/start.o (.bootpg) + } = 0xffff + + .resetvec ADDR(.text) + 0x7fffc : + { + *(.resetvec) + } = 0xffff + + . = ADDR(.text) + 0x80000; + __bss_start = .; .bss (NOLOAD) : { @@ -144,6 +132,8 @@ SECTIONS *(.bss) *(COMMON) } + + . = ALIGN(4); _end = . ; PROVIDE (end = .); } diff --git a/board/idmr/mii.c b/board/idmr/mii.c index f130e6e..78a7028 100644 --- a/board/idmr/mii.c +++ b/board/idmr/mii.c @@ -200,7 +200,7 @@ int mii_discover_phy(struct eth_device *dev) } #endif /* CFG_DISCOVER_PHY */ -int mii_init(void) __attribute__((weak,alias("__mii_init"))); +void mii_init(void) __attribute__((weak,alias("__mii_init"))); void __mii_init(void) { diff --git a/board/ids8247/ids8247.c b/board/ids8247/ids8247.c index 44fc79c..065014a 100644 --- a/board/ids8247/ids8247.c +++ b/board/ids8247/ids8247.c @@ -321,7 +321,7 @@ nand_init (void) printf ("%4lu MB\n", totlen >>20); } -#endif /* CFG_CMD_NAND */ +#endif /* CONFIG_CMD_NAND */ #if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) /* diff --git a/board/matrix_vision/mvbc_p/mvbc_p.c b/board/matrix_vision/mvbc_p/mvbc_p.c index b61e84e..5c71dec 100644 --- a/board/matrix_vision/mvbc_p/mvbc_p.c +++ b/board/matrix_vision/mvbc_p/mvbc_p.c @@ -32,6 +32,7 @@ #include <malloc.h> #include <pci.h> #include <i2c.h> +#include <fpga.h> #include <environment.h> #include <fdt_support.h> #include <asm/io.h> @@ -109,7 +110,7 @@ void mvbc_init_gpio(void) struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio*)MPC5XXX_GPIO; printf("Ports : 0x%08x\n", gpio->port_config); - printf("PORCFG: 0x%08x\n", *(vu_long*)MPC5XXX_CDM_PORCFG); + printf("PORCFG: 0x%08lx\n", *(vu_long*)MPC5XXX_CDM_PORCFG); out_be32(&gpio->simple_ddr, SIMPLE_DDR); out_be32(&gpio->simple_dvo, SIMPLE_DVO); diff --git a/board/tqc/tqm85xx/tqm85xx.c b/board/tqc/tqm85xx/tqm85xx.c index 839d47d..ae3c245 100644 --- a/board/tqc/tqm85xx/tqm85xx.c +++ b/board/tqc/tqm85xx/tqm85xx.c @@ -464,7 +464,7 @@ void local_bus_init (void) if (lbc_mhz < 66) { lbc->lcrr = CFG_LBC_LCRR | LCRR_DBYP; /* DLL Bypass */ - lbc->ltedr = LTEDR_BMD | LTEDR_PARD | LTEDR_WPD | LTERD_WARA | + lbc->ltedr = LTEDR_BMD | LTEDR_PARD | LTEDR_WPD | LTEDR_WARA | LTEDR_RAWA | LTEDR_CSD; /* Disable all error checking */ } else if (lbc_mhz >= 133) { diff --git a/board/w7o/post2.c b/board/w7o/post2.c index e590128..6ee33eb 100644 --- a/board/w7o/post2.c +++ b/board/w7o/post2.c @@ -29,6 +29,12 @@ #include "errors.h" #include "dtt.h" +/* for LM75 DTT POST test */ +#define DTT_READ_TEMP 0x0 +#define DTT_CONFIG 0x1 +#define DTT_TEMP_HYST 0x2 +#define DTT_TEMP_SET 0x3 + #if defined(CONFIG_RTC_M48T35A) void rtctest(void) { diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index 1c0a416..18d7100 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -36,7 +36,7 @@ #include <lmb.h> #include <asm/byteorder.h> -#if (CONFIG_COMMANDS & CFG_CMD_USB) +#if defined(CONFIG_CMD_USB) #include <usb.h> #endif @@ -217,7 +217,7 @@ int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) */ iflag = disable_interrupts(); -#if (CONFIG_COMMANDS & CFG_CMD_USB) +#if defined(CONFIG_CMD_USB) /* * turn off USB to prevent the host controller from writing to the * SDRAM while Linux is booting. This could happen (at least for OHCI @@ -251,10 +251,9 @@ int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) memmove_wd ((void *)load_start, (void *)os_data, os_len, CHUNKSZ); - - load_end = load_start + os_len; - puts("OK\n"); } + load_end = load_start + os_len; + puts("OK\n"); break; case IH_COMP_GZIP: printf (" Uncompressing %s ... ", type_name); diff --git a/common/cmd_flash.c b/common/cmd_flash.c index a7f66dd..18d2250 100644 --- a/common/cmd_flash.c +++ b/common/cmd_flash.c @@ -342,7 +342,7 @@ int do_flerase (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) puts ("Bad sector specification\n"); return 1; } - printf ("Erase Flash Sectors %d-%d in Bank # %d ", + printf ("Erase Flash Sectors %d-%d in Bank # %zu ", sect_first, sect_last, (info-flash_info)+1); rcode = flash_erase(info, sect_first, sect_last); return rcode; @@ -534,7 +534,7 @@ int do_protect (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) puts ("Bad sector specification\n"); return 1; } - printf("%sProtect Flash Sectors %d-%d in Bank # %d\n", + printf("%sProtect Flash Sectors %d-%d in Bank # %zu\n", p ? "" : "Un-", sect_first, sect_last, (info-flash_info)+1); for (i = sect_first; i <= sect_last; i++) { diff --git a/common/cmd_ide.c b/common/cmd_ide.c index 56db433..d6ba79f 100644 --- a/common/cmd_ide.c +++ b/common/cmd_ide.c @@ -161,8 +161,6 @@ static uchar ide_wait (int dev, ulong t); #define IDE_SPIN_UP_TIME_OUT 5000 /* 5 sec spin-up timeout */ -void inline ide_outb(int dev, int port, unsigned char val); -unsigned char inline ide_inb(int dev, int port); static void input_data(int dev, ulong *sect_buf, int words); static void output_data(int dev, ulong *sect_buf, int words); static void ident_cpy (unsigned char *dest, unsigned char *src, unsigned int len); @@ -523,6 +521,28 @@ int do_diskboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) /* ------------------------------------------------------------------------- */ +void inline +__ide_outb(int dev, int port, unsigned char val) +{ + debug ("ide_outb (dev= %d, port= 0x%x, val= 0x%02x) : @ 0x%08lx\n", + dev, port, val, (ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port))); + outb(val, (ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port))); +} +void inline ide_outb (int dev, int port, unsigned char val) + __attribute__((weak, alias("__ide_outb"))); + +unsigned char inline +__ide_inb(int dev, int port) +{ + uchar val; + val = inb((ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port))); + debug ("ide_inb (dev= %d, port= 0x%x) : @ 0x%08lx -> 0x%02x\n", + dev, port, (ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port)), val); + return val; +} +unsigned char inline ide_inb(int dev, int port) + __attribute__((weak, alias("__ide_inb"))); + void ide_init (void) { @@ -817,28 +837,6 @@ set_pcmcia_timing (int pmode) /* ------------------------------------------------------------------------- */ -void inline -__ide_outb(int dev, int port, unsigned char val) -{ - debug ("ide_outb (dev= %d, port= 0x%x, val= 0x%02x) : @ 0x%08lx\n", - dev, port, val, (ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port))); - outb(val, (ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port))); -} -void inline ide_outb (int dev, int port, unsigned char val) - __attribute__((weak, alias("__ide_outb"))); - -unsigned char inline -__ide_inb(int dev, int port) -{ - uchar val; - val = inb((ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port))); - debug ("ide_inb (dev= %d, port= 0x%x) : @ 0x%08lx -> 0x%02x\n", - dev, port, (ATA_CURR_BASE(dev)+CFG_ATA_PORT_ADDR(port)), val); - return val; -} -unsigned char inline ide_inb(int dev, int port) - __attribute__((weak, alias("__ide_inb"))); - #ifdef __PPC__ # ifdef CONFIG_AMIGAONEG3SE static void diff --git a/common/dlmalloc.c b/common/dlmalloc.c index c51351e..4a18562 100644 --- a/common/dlmalloc.c +++ b/common/dlmalloc.c @@ -1457,7 +1457,7 @@ typedef struct malloc_chunk* mbinptr; indexing, maintain locality, and avoid some initialization tests. */ -#define top (bin_at(0)->fd) /* The topmost chunk */ +#define top (av_[2]) /* The topmost chunk */ #define last_remainder (bin_at(1)) /* remainder from last split */ @@ -1552,13 +1552,14 @@ void malloc_bin_reloc (void) #define BINBLOCKWIDTH 4 /* bins per block */ -#define binblocks (bin_at(0)->size) /* bitvector of nonempty blocks */ +#define binblocks_r ((INTERNAL_SIZE_T)av_[1]) /* bitvector of nonempty blocks */ +#define binblocks_w (av_[1]) /* bin<->block macros */ #define idx2binblock(ix) ((unsigned)1 << (ix / BINBLOCKWIDTH)) -#define mark_binblock(ii) (binblocks |= idx2binblock(ii)) -#define clear_binblock(ii) (binblocks &= ~(idx2binblock(ii))) +#define mark_binblock(ii) (binblocks_w = (mbinptr)(binblocks_r | idx2binblock(ii))) +#define clear_binblock(ii) (binblocks_w = (mbinptr)(binblocks_r & ~(idx2binblock(ii)))) @@ -2250,17 +2251,17 @@ Void_t* mALLOc(bytes) size_t bytes; search for best fitting chunk by scanning bins in blockwidth units. */ - if ( (block = idx2binblock(idx)) <= binblocks) + if ( (block = idx2binblock(idx)) <= binblocks_r) { /* Get to the first marked block */ - if ( (block & binblocks) == 0) + if ( (block & binblocks_r) == 0) { /* force to an even block boundary */ idx = (idx & ~(BINBLOCKWIDTH - 1)) + BINBLOCKWIDTH; block <<= 1; - while ((block & binblocks) == 0) + while ((block & binblocks_r) == 0) { idx += BINBLOCKWIDTH; block <<= 1; @@ -2315,7 +2316,7 @@ Void_t* mALLOc(bytes) size_t bytes; { if ((startidx & (BINBLOCKWIDTH - 1)) == 0) { - binblocks &= ~block; + av_[1] = (mbinptr)(binblocks_r & ~block); break; } --startidx; @@ -2324,9 +2325,9 @@ Void_t* mALLOc(bytes) size_t bytes; /* Get to the next possibly nonempty block */ - if ( (block <<= 1) <= binblocks && (block != 0) ) + if ( (block <<= 1) <= binblocks_r && (block != 0) ) { - while ((block & binblocks) == 0) + while ((block & binblocks_r) == 0) { idx += BINBLOCKWIDTH; block <<= 1; diff --git a/common/lcd.c b/common/lcd.c index eec1f53..e3347ec 100644 --- a/common/lcd.c +++ b/common/lcd.c @@ -678,6 +678,7 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y) /* Set color map */ for (i=0; i<colors; ++i) { bmp_color_table_entry_t cte = bmp->color_table[i]; +#if !defined(CONFIG_ATMEL_LCD) ushort colreg = ( ((cte.red) << 8) & 0xf800) | ( ((cte.green) << 3) & 0x07e0) | @@ -692,6 +693,9 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y) #elif defined(CONFIG_MPC823) cmap--; #endif +#else /* CONFIG_ATMEL_LCD */ + lcd_setcolreg(i, cte.red, cte.green, cte.blue); +#endif } } #endif @@ -727,7 +731,7 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y) for (i = 0; i < height; ++i) { WATCHDOG_RESET(); for (j = 0; j < width ; j++) -#if defined(CONFIG_PXA250) +#if defined(CONFIG_PXA250) || defined(CONFIG_ATMEL_LCD) *(fb++) = *(bmap++); #elif defined(CONFIG_MPC823) || defined(CONFIG_MCC200) *(fb++)=255-*(bmap++); @@ -740,6 +744,9 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y) } #endif +#ifdef CONFIG_VIDEO_BMP_GZIP +extern bmp_image_t *gunzip_bmp(unsigned long addr, unsigned long *lenp); +#endif static void *lcd_logo (void) { @@ -761,6 +768,16 @@ static void *lcd_logo (void) addr = simple_strtoul(s, NULL, 16); do_splash = 0; +#ifdef CONFIG_VIDEO_BMP_GZIP + bmp_image_t *bmp = (bmp_image_t *)addr; + unsigned long len; + + if (!((bmp->header.signature[0]=='B') && + (bmp->header.signature[1]=='M'))) { + addr = (ulong)gunzip_bmp(addr, &len); + } +#endif + if (lcd_display_bitmap (addr, 0, 0) == 0) { return ((void *)lcd_base); } diff --git a/common/main.c b/common/main.c index 79ad291..187ef8a 100644 --- a/common/main.c +++ b/common/main.c @@ -116,7 +116,7 @@ static __inline__ int abortboot(int bootdelay) u_int i; # ifdef CONFIG_AUTOBOOT_PROMPT - printf(CONFIG_AUTOBOOT_PROMPT, bootdelay); + printf(CONFIG_AUTOBOOT_PROMPT); # endif # ifdef CONFIG_AUTOBOOT_DELAY_STR @@ -212,7 +212,7 @@ static __inline__ int abortboot(int bootdelay) int abort = 0; #ifdef CONFIG_MENUPROMPT - printf(CONFIG_MENUPROMPT, bootdelay); + printf(CONFIG_MENUPROMPT); #else printf("Hit any key to stop autoboot: %2d ", bootdelay); #endif diff --git a/cpu/mips/au1x00_serial.c b/cpu/mips/au1x00_serial.c index 6309794..e8baab5 100644 --- a/cpu/mips/au1x00_serial.c +++ b/cpu/mips/au1x00_serial.c @@ -76,7 +76,7 @@ void serial_setbrg (void) sd = (*sys_powerctrl & 0x03) + 2; /* calulate 2x baudrate and round */ - divisorx2 = ((CFG_HZ/(sd * 16 * CONFIG_BAUDRATE))); + divisorx2 = ((CFG_MIPS_TIMER_FREQ/(sd * 16 * CONFIG_BAUDRATE))); if (divisorx2 & 0x01) divisorx2 = divisorx2 + 1; diff --git a/cpu/mpc8260/speed.c b/cpu/mpc8260/speed.c index 38cd0d9..8d280fb 100644 --- a/cpu/mpc8260/speed.c +++ b/cpu/mpc8260/speed.c @@ -162,6 +162,30 @@ int get_clocks (void) gd->cpu_clk = clkin; } +#ifdef CONFIG_PCI + gd->pci_clk = clkin; + + if (sccr & SCCR_PCI_MODE) { + uint pci_div; + uint pcidf = (sccr & SCCR_PCIDF_MSK) >> SCCR_PCIDF_SHIFT; + + if (sccr & SCCR_PCI_MODCK) { + pci_div = 2; + if (pcidf == 9) { + pci_div *= 5; + } else if (pcidf == 0xB) { + pci_div *= 6; + } else { + pci_div *= (pcidf + 1); + } + } else { + pci_div = pcidf + 1; + } + + gd->pci_clk = (gd->cpm_clk * 2) / pci_div; + } +#endif + return (0); } @@ -220,26 +244,9 @@ int prt_8260_clks (void) printf (" - cpu_clk %10ld, cpm_clk %10ld, bus_clk %10ld\n", gd->cpu_clk, gd->cpm_clk, gd->bus_clk); - - if (sccr & SCCR_PCI_MODE) { - uint pci_div; - uint pcidf = (sccr & SCCR_PCIDF_MSK) >> SCCR_PCIDF_SHIFT; - - if (sccr & SCCR_PCI_MODCK) { - pci_div = 2; - if (pcidf == 9) { - pci_div *= 5; - } else if (pcidf == 0xB) { - pci_div *= 6; - } else { - pci_div *= (pcidf + 1); - } - } else { - pci_div = pcidf + 1; - } - - printf (" - pci_clk %10ld\n", (gd->cpm_clk * 2) / pci_div); - } +#ifdef CONFIG_PCI + printf (" - pci_clk %10ld\n", gd->pci_clk); +#endif putc ('\n'); return (0); diff --git a/cpu/nios2/interrupts.c b/cpu/nios2/interrupts.c index aeb5b65..ec5db31b 100644 --- a/cpu/nios2/interrupts.c +++ b/cpu/nios2/interrupts.c @@ -27,6 +27,7 @@ #include <nios2.h> #include <nios2-io.h> +#include <asm/types.h> #include <asm/io.h> #include <asm/ptrace.h> #include <common.h> diff --git a/cpu/nios2/sysid.c b/cpu/nios2/sysid.c index b5a2959..697ed03 100644 --- a/cpu/nios2/sysid.c +++ b/cpu/nios2/sysid.c @@ -40,7 +40,7 @@ void display_sysid (void) stamp = readl (&sysid->timestamp); localtime_r (&stamp, &t); asctime_r (&t, asc); - printf ("SYSID : %08x, %s", readl (&sysid->id), asc); + printf ("SYSID : %08lx, %s", readl (&sysid->id), asc); } diff --git a/cpu/pxa/mmc.c b/cpu/pxa/mmc.c index 2c86a01..121dcbe 100644 --- a/cpu/pxa/mmc.c +++ b/cpu/pxa/mmc.c @@ -559,11 +559,6 @@ mmc_init(int verbose) set_GPIO_mode(GPIO8_MMCCS0_MD); #endif CKEN |= CKEN12_MMC; /* enable MMC unit clock */ -#if defined(CONFIG_ADSVIX) - /* turn on the power */ - GPCR(114) = GPIO_bit(114); - udelay(1000); -#endif MMC_CLKRT = MMC_CLKRT_0_3125MHZ; MMC_RESTO = MMC_RES_TO_MAX; diff --git a/doc/README.autoboot b/doc/README.autoboot index e4c4186..2042fe5 100644 --- a/doc/README.autoboot +++ b/doc/README.autoboot @@ -114,10 +114,17 @@ What they do CONFIG_AUTOBOOT_PROMPT is displayed before the boot delay selected by CONFIG_BOOTDELAY starts. If it is not defined there is no output indicating that autoboot is in progress. - If "%d" is included, it is replaced by the number of seconds - remaining before autoboot will start, but it does not count - down the seconds. "autoboot in %d seconds\n" is a reasonable - prompt. + + Note that CONFIG_AUTOBOOT_PROMPT is used as the (only) + argument to a printf() call, so it may contain '%' format + specifications, provided that it also includes, sepearated by + commas exactly like in a printf statement, the required + arguments. It is the responsibility of the user to select only + such arguments that are valid in the given context. A + reasonable prompt could be defined as + + #define CONFIG_AUTOBOOT_PROMPT \ + "autoboot in %d seconds\n",bootdelay If CONFIG_AUTOBOOT_DELAY_STR or "bootdelaykey" is specified and this string is received from console input before diff --git a/doc/README.qemu_mips b/doc/README.qemu_mips index 476c5e6..c9ac3f3 100644 --- a/doc/README.qemu_mips +++ b/doc/README.qemu_mips @@ -15,4 +15,4 @@ create image: # dd of=flash bs=1k count=4k if=/dev/zero # dd of=flash bs=1k conv=notrunc if=u-boot.bin start it: -# qemu-system-mips -pflash flash -monitor null -nographic +# qemu-system-mips -M mips -pflash flash -monitor null -nographic diff --git a/drivers/i2c/fsl_i2c.c b/drivers/i2c/fsl_i2c.c index 9f2c1ec..3f78e2f 100644 --- a/drivers/i2c/fsl_i2c.c +++ b/drivers/i2c/fsl_i2c.c @@ -143,12 +143,15 @@ void i2c_init(int speed, int slaveadd) { struct fsl_i2c *dev; + unsigned int temp; dev = (struct fsl_i2c *) (CFG_IMMR + CFG_I2C_OFFSET); writeb(0, &dev->cr); /* stop I2C controller */ udelay(5); /* let it shutdown in peace */ - i2c_bus_speed[0] = set_i2c_bus_speed(dev, gd->i2c1_clk, speed); + temp = set_i2c_bus_speed(dev, gd->i2c1_clk, speed); + if (gd->flags & GD_FLG_RELOC) + i2c_bus_speed[0] = temp; writeb(slaveadd << 1, &dev->adr); /* write slave address */ writeb(0x0, &dev->sr); /* clear status register */ writeb(I2C_CR_MEN, &dev->cr); /* start I2C controller */ @@ -158,7 +161,9 @@ i2c_init(int speed, int slaveadd) writeb(0, &dev->cr); /* stop I2C controller */ udelay(5); /* let it shutdown in peace */ - i2c_bus_speed[1] = set_i2c_bus_speed(dev, gd->i2c2_clk, speed); + temp = set_i2c_bus_speed(dev, gd->i2c2_clk, speed); + if (gd->flags & GD_FLG_RELOC) + i2c_bus_speed[1] = temp; writeb(slaveadd << 1, &dev->adr); /* write slave address */ writeb(0x0, &dev->sr); /* clear status register */ writeb(I2C_CR_MEN, &dev->cr); /* start I2C controller */ @@ -168,12 +173,11 @@ i2c_init(int speed, int slaveadd) static __inline__ int i2c_wait4bus(void) { - ulong timeval = get_timer(0); + unsigned long long timeval = get_ticks(); while (readb(&i2c_dev[i2c_bus_num]->sr) & I2C_SR_MBB) { - if (get_timer(timeval) > I2C_TIMEOUT) { + if ((get_ticks() - timeval) > usec2ticks(I2C_TIMEOUT)) return -1; - } } return 0; @@ -183,7 +187,7 @@ static __inline__ int i2c_wait(int write) { u32 csr; - ulong timeval = get_timer(0); + unsigned long long timeval = get_ticks(); do { csr = readb(&i2c_dev[i2c_bus_num]->sr); @@ -208,7 +212,7 @@ i2c_wait(int write) } return 0; - } while (get_timer (timeval) < I2C_TIMEOUT); + } while ((get_ticks() - timeval) < usec2ticks(I2C_TIMEOUT)); debug("i2c_wait: timed out\n"); return -1; diff --git a/drivers/mmc/atmel_mci.c b/drivers/mmc/atmel_mci.c index 61aa184..a151488 100644 --- a/drivers/mmc/atmel_mci.c +++ b/drivers/mmc/atmel_mci.c @@ -135,10 +135,10 @@ mmc_cmd(unsigned long cmd, unsigned long arg, status = mmci_readl(SR); } while (!(status & MMCI_BIT(CMDRDY))); - pr_debug("mmc: status 0x%08lx\n", status); + pr_debug("mmc: status 0x%08x\n", status); if (status & error_flags) { - printf("mmc: command %lu failed (status: 0x%08lx)\n", + printf("mmc: command %lu failed (status: 0x%08x)\n", cmd, status); return -EIO; } @@ -245,7 +245,7 @@ out: read_error: mmc_cmd(MMC_CMD_SEND_STATUS, mmc_rca << 16, &card_status, R1 | NCR); - printf("mmc: bread failed, status = %08x, card status = %08x\n", + printf("mmc: bread failed, status = %08x, card status = %08lx\n", status, card_status); goto out; } @@ -284,13 +284,13 @@ static void sd_parse_cid(struct mmc_cid *cid, unsigned long *resp) static void mmc_dump_cid(const struct mmc_cid *cid) { - printf("Manufacturer ID: %02lX\n", cid->mid); - printf("OEM/Application ID: %04lX\n", cid->oid); + printf("Manufacturer ID: %02X\n", cid->mid); + printf("OEM/Application ID: %04X\n", cid->oid); printf("Product name: %s\n", cid->pnm); - printf("Product Revision: %lu.%lu\n", + printf("Product Revision: %u.%u\n", cid->prv >> 4, cid->prv & 0x0f); printf("Product Serial Number: %lu\n", cid->psn); - printf("Manufacturing Date: %02lu/%02lu\n", + printf("Manufacturing Date: %02u/%02u\n", cid->mdt >> 4, cid->mdt & 0x0f); } @@ -501,7 +501,7 @@ int mmc_init(int verbose) mmc_blkdev.part_type = PART_TYPE_DOS; mmc_blkdev.block_read = mmc_bread; sprintf((char *)mmc_blkdev.vendor, - "Man %02x%04x Snr %08x", + "Man %02x%04x Snr %08lx", cid.mid, cid.oid, cid.psn); strncpy((char *)mmc_blkdev.product, cid.pnm, sizeof(mmc_blkdev.product)); diff --git a/drivers/mtd/spi/atmel.c b/drivers/mtd/spi/atmel.c index fb7a4a9..10fcf0c 100644 --- a/drivers/mtd/spi/atmel.c +++ b/drivers/mtd/spi/atmel.c @@ -205,7 +205,7 @@ static int dataflash_write_at45(struct spi_flash *flash, byte_addr = 0; } - debug("SF: AT45: Successfully programmed %u bytes @ 0x%x\n", + debug("SF: AT45: Successfully programmed %zu bytes @ 0x%x\n", len, offset); ret = 0; @@ -268,7 +268,7 @@ int dataflash_erase_at45(struct spi_flash *flash, u32 offset, size_t len) page_addr++; } - debug("SF: AT45: Successfully erased %u bytes @ 0x%x\n", + debug("SF: AT45: Successfully erased %zu bytes @ 0x%x\n", len, offset); ret = 0; @@ -351,7 +351,7 @@ struct spi_flash *spi_flash_probe_atmel(struct spi_slave *spi, u8 *idcode) * params->blocks_per_sector * params->nr_sectors; - debug("SF: Detected %s with page size %u, total %u bytes\n", + debug("SF: Detected %s with page size %lu, total %u bytes\n", params->name, page_size, asf->flash.size); return &asf->flash; diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c index 060b518..c8b4e98 100644 --- a/drivers/net/e1000.c +++ b/drivers/net/e1000.c @@ -513,9 +513,11 @@ e1000_read_mac_addr(struct eth_device *nic) nic->enetaddr[5] += 1; } #ifdef CONFIG_E1000_FALLBACK_MAC - if ( *(u32*)(nic->enetaddr) == 0 || *(u32*)(nic->enetaddr) == ~0 ) - for ( i=0; i < NODE_ADDRESS_SIZE; i++ ) - nic->enetaddr[i] = (CONFIG_E1000_FALLBACK_MAC >> (8*(5-i))) & 0xff; + if ( *(u32*)(nic->enetaddr) == 0 || *(u32*)(nic->enetaddr) == ~0 ) { + unsigned char fb_mac[NODE_ADDRESS_SIZE] = CONFIG_E1000_FALLBACK_MAC; + + memcpy (nic->enetaddr, fb_mac, NODE_ADDRESS_SIZE); + } #endif #else /* @@ -531,10 +533,9 @@ e1000_read_mac_addr(struct eth_device *nic) DEBUGFUNC(); s = getenv ("ethaddr"); - if (s == NULL){ + if (s == NULL) { return -E1000_ERR_EEPROM; - } - else{ + } else { for(ii = 0; ii < 6; ii++) { nic->enetaddr[ii] = s ? simple_strtoul (s, &e, 16) : 0; if (s){ diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index c9e797e..de6fbab 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -25,18 +25,18 @@ include $(TOPDIR)/config.mk LIB := $(obj)libserial.a -COBJS-y += atmel_usart.o -COBJS-y += mcfuart.o +COBJS-$(CONFIG_ATMEL_USART) += atmel_usart.o +COBJS-$(CONFIG_MCFUART) += mcfuart.o COBJS-y += ns9750_serial.o COBJS-y += ns16550.o -COBJS-y += s3c4510b_uart.o +COBJS-$(CONFIG_DRIVER_S3C4510_UART) += s3c4510b_uart.o COBJS-y += serial.o -COBJS-y += serial_max3100.o +COBJS-$(CONFIG_MAX3100_SERIAL) += serial_max3100.o COBJS-y += serial_pl010.o COBJS-y += serial_pl011.o -COBJS-y += serial_xuartlite.o +COBJS-$(CONFIG_XILINX_UARTLITE) += serial_xuartlite.o COBJS-y += serial_sh.o -COBJS-y += usbtty.o +COBJS-$(CONFIG_USB_TTY) += usbtty.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/serial/atmel_usart.c b/drivers/serial/atmel_usart.c index f35b997..f3b146c 100644 --- a/drivers/serial/atmel_usart.c +++ b/drivers/serial/atmel_usart.c @@ -17,7 +17,6 @@ */ #include <common.h> -#ifdef CONFIG_ATMEL_USART #include <asm/io.h> #include <asm/arch/clk.h> #include <asm/arch/memory-map.h> @@ -96,5 +95,3 @@ int serial_tstc(void) { return (usart3_readl(CSR) & USART3_BIT(RXRDY)) != 0; } - -#endif /* CONFIG_ATMEL_USART */ diff --git a/drivers/serial/mcfuart.c b/drivers/serial/mcfuart.c index 5eb4f45..a1fcd05 100644 --- a/drivers/serial/mcfuart.c +++ b/drivers/serial/mcfuart.c @@ -29,8 +29,6 @@ #include <common.h> -#ifdef CONFIG_MCFUART - #include <asm/immap.h> #include <asm/uart.h> @@ -130,4 +128,3 @@ void serial_setbrg(void) uart->ucr = UART_UCR_RX_ENABLED | UART_UCR_TX_ENABLED; } -#endif /* CONFIG_MCFUART */ diff --git a/drivers/serial/s3c4510b_uart.c b/drivers/serial/s3c4510b_uart.c index ddcd591..aa378e1 100644 --- a/drivers/serial/s3c4510b_uart.c +++ b/drivers/serial/s3c4510b_uart.c @@ -45,8 +45,6 @@ #include <common.h> -#ifdef CONFIG_DRIVER_S3C4510_UART - #include <asm/hardware.h> #include "s3c4510b_uart.h" @@ -212,5 +210,3 @@ void serial_puts (const char *s) uart->m_ctrl.bf.sendBreak = 0; } - -#endif diff --git a/drivers/serial/serial_max3100.c b/drivers/serial/serial_max3100.c index 0611fc1..4abc271 100644 --- a/drivers/serial/serial_max3100.c +++ b/drivers/serial/serial_max3100.c @@ -26,8 +26,6 @@ #include <common.h> #include <watchdog.h> -#ifdef CONFIG_MAX3100_SERIAL - DECLARE_GLOBAL_DATA_PTR; /**************************************************************/ @@ -298,5 +296,3 @@ int serial_tstc(void) void serial_setbrg(void) { } - -#endif diff --git a/drivers/serial/serial_xuartlite.c b/drivers/serial/serial_xuartlite.c index 74546ce..00d0eaa 100644 --- a/drivers/serial/serial_xuartlite.c +++ b/drivers/serial/serial_xuartlite.c @@ -27,8 +27,6 @@ #include <config.h> #include <asm/io.h> -#ifdef CONFIG_XILINX_UARTLITE - #define RX_FIFO_OFFSET 0 /* receive FIFO, read only */ #define TX_FIFO_OFFSET 4 /* transmit FIFO, write only */ #define STATUS_REG_OFFSET 8 /* status register, read only */ @@ -77,5 +75,3 @@ int serial_tstc(void) { return (in_be32((u32 *) UARTLITE_STATUS) & SR_RX_FIFO_VALID_DATA); } - -#endif /* CONFIG_MICROBLZE */ diff --git a/drivers/serial/usbtty.c b/drivers/serial/usbtty.c index 2bc5c3c..e738c56 100644 --- a/drivers/serial/usbtty.c +++ b/drivers/serial/usbtty.c @@ -23,8 +23,6 @@ #include <common.h> -#ifdef CONFIG_USB_TTY - #include <circbuf.h> #include <devices.h> #include "usbtty.h" @@ -1007,6 +1005,3 @@ void usbtty_poll (void) udc_irq(); } - - -#endif diff --git a/drivers/usb/usbdcore.c b/drivers/usb/usbdcore.c index 808da9f..53ed669 100644 --- a/drivers/usb/usbdcore.c +++ b/drivers/usb/usbdcore.c @@ -552,7 +552,7 @@ struct urb *usbd_alloc_urb (struct usb_device_instance *device, struct urb *urb; if (!(urb = (struct urb *) malloc (sizeof (struct urb)))) { - usberr (" F A T A L: malloc(%u) FAILED!!!!", + usberr (" F A T A L: malloc(%zu) FAILED!!!!", sizeof (struct urb)); return NULL; } diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index 27df449..b332a82 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -100,7 +100,11 @@ void lcd_ctrl_init(void *lcdbase) value << ATMEL_LCDC_CLKVAL_OFFSET); /* Initialize control register 2 */ +#ifdef CONFIG_AVR32 + value = ATMEL_LCDC_MEMOR_BIG | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE; +#else value = ATMEL_LCDC_MEMOR_LITTLE | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE; +#endif if (panel_info.vl_tft) value |= ATMEL_LCDC_DISTYPE_TFT; diff --git a/include/api_public.h b/include/api_public.h index 9bc0501..5b0c09e 100644 --- a/include/api_public.h +++ b/include/api_public.h @@ -126,6 +126,7 @@ typedef unsigned long lbastart_t; #define DT_STOR_SCSI 0x0020 #define DT_STOR_USB 0x0040 #define DT_STOR_MMC 0x0080 +#define DT_STOR_SATA 0x0100 #define DEV_STA_CLOSED 0x0000 /* invalid, closed */ #define DEV_STA_OPEN 0x0001 /* open i.e. active */ diff --git a/include/asm-arm/arch-at91rm9200/AT91RM9200.h b/include/asm-arm/arch-at91rm9200/AT91RM9200.h index 2f7f710..95db017 100644 --- a/include/asm-arm/arch-at91rm9200/AT91RM9200.h +++ b/include/asm-arm/arch-at91rm9200/AT91RM9200.h @@ -25,6 +25,7 @@ #ifndef AT91RM9200_H #define AT91RM9200_H +#ifndef __ASSEMBLY__ typedef volatile unsigned int AT91_REG; /* Hardware register definition */ /*****************************************************************************/ @@ -780,4 +781,5 @@ typedef struct _AT91S_PDC #define AT91C_PIOB_ODR ((AT91_REG *) 0xFFFFF614) /* (PIOB) Output Disable Registerr */ #define AT91C_PIOB_PDSR ((AT91_REG *) 0xFFFFF63C) /* (PIOB) Pin Data Status Register */ -#endif +#endif /* __ASSEMBLY__ */ +#endif /* AT91RM9200_H */ diff --git a/include/asm-avr32/io.h b/include/asm-avr32/io.h index d030c26..06e52b1 100644 --- a/include/asm-avr32/io.h +++ b/include/asm-avr32/io.h @@ -22,6 +22,8 @@ #ifndef __ASM_AVR32_IO_H #define __ASM_AVR32_IO_H +#include <asm/types.h> + #ifdef __KERNEL__ /* diff --git a/include/asm-avr32/sysreg.h b/include/asm-avr32/sysreg.h index 72ad49e..4f69704 100644 --- a/include/asm-avr32/sysreg.h +++ b/include/asm-avr32/sysreg.h @@ -273,7 +273,9 @@ | SYSREG_BF(name,value)) /* Register access macros */ -#define sysreg_read(reg) __builtin_mfsr(SYSREG_##reg) -#define sysreg_write(reg, value) __builtin_mtsr(SYSREG_##reg, value) +#define sysreg_read(reg) \ + ((unsigned long)__builtin_mfsr(SYSREG_##reg)) +#define sysreg_write(reg, value) \ + __builtin_mtsr(SYSREG_##reg, value) #endif /* __ASM_AVR32_SYSREG_H__ */ diff --git a/include/asm-nios2/types.h b/include/asm-nios2/types.h index f13d8bd..ea859c0 100644 --- a/include/asm-nios2/types.h +++ b/include/asm-nios2/types.h @@ -52,6 +52,9 @@ typedef unsigned long long u64; /* Dma addresses are 32-bits wide. */ typedef u32 dma_addr_t; + +typedef unsigned long phys_addr_t; +typedef unsigned long phys_size_t; #endif /* __KERNEL__ */ #endif /* __ASM_NIOS2_TYPES_H */ diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h index c5ac658..be2ce24 100644 --- a/include/asm-ppc/global_data.h +++ b/include/asm-ppc/global_data.h @@ -51,6 +51,9 @@ typedef struct global_data { unsigned long cpm_clk; unsigned long scc_clk; unsigned long brg_clk; +#ifdef CONFIG_PCI + unsigned long pci_clk; +#endif #endif unsigned long mem_clk; #if defined(CONFIG_MPC83XX) diff --git a/include/command.h b/include/command.h index c3ef51d..4a27e97 100644 --- a/include/command.h +++ b/include/command.h @@ -27,6 +27,8 @@ #ifndef __COMMAND_H #define __COMMAND_H +#include <config.h> + #ifndef NULL #define NULL 0 #endif diff --git a/include/configs/ADS860.h b/include/configs/ADS860.h index 2ee8c61..f677b9c 100644 --- a/include/configs/ADS860.h +++ b/include/configs/ADS860.h @@ -51,7 +51,7 @@ /* This is picked up again in fads.h */ #define FADS_COMMANDS_ALREADY_DEFINED -#include "fads.h" +#include "../../board/fads/fads.h" #define CFG_PC_IDE_RESET ((ushort)0x0008) /* PC 12 */ diff --git a/include/configs/APC405.h b/include/configs/APC405.h index 02f0c76..2f266a2 100644 --- a/include/configs/APC405.h +++ b/include/configs/APC405.h @@ -193,7 +193,8 @@ /* If a long serial cable is connected but */ /* other end is dead, garbage will be read */ #define CONFIG_AUTOBOOT_KEYED 1 -#define CONFIG_AUTOBOOT_PROMPT "Press SPACE to abort autoboot in %d seconds\n" +#define CONFIG_AUTOBOOT_PROMPT \ + "Press SPACE to abort autoboot in %d seconds\n", bootdelay #undef CONFIG_AUTOBOOT_DELAY_STR #define CONFIG_AUTOBOOT_STOP_STR " " diff --git a/include/configs/Adder.h b/include/configs/Adder.h index 7389c38..cefdd29 100644 --- a/include/configs/Adder.h +++ b/include/configs/Adder.h @@ -131,7 +131,7 @@ #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ #define CFG_MONITOR_BASE TEXT_BASE -#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 KB for Monitor */ +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 KB for Monitor */ #ifdef CONFIG_BZIP2 #define CFG_MALLOC_LEN (2500 << 10) /* Reserve ~2.5 MB for malloc() */ #else diff --git a/include/configs/AmigaOneG3SE.h b/include/configs/AmigaOneG3SE.h index a992498..84efd2f 100644 --- a/include/configs/AmigaOneG3SE.h +++ b/include/configs/AmigaOneG3SE.h @@ -371,7 +371,8 @@ #define CONFIG_BOOTDELAY 5 /* Boot automatically after five seconds */ #define CONFIG_PREBOOT "" #define CONFIG_BOOTCOMMAND "fdcboot; diskboot" -#define CONFIG_MENUPROMPT "Press any key to interrupt autoboot: %2d " +#define CONFIG_MENUPROMPT \ + "Press any key to interrupt autoboot: %2d ", bootdelay #define CONFIG_MENUKEY ' ' #define CONFIG_MENUCOMMAND "menu" /* #define CONFIG_AUTOBOOT_KEYED */ diff --git a/include/configs/CPCI405DT.h b/include/configs/CPCI405DT.h index 6b585be..c173539 100644 --- a/include/configs/CPCI405DT.h +++ b/include/configs/CPCI405DT.h @@ -152,8 +152,9 @@ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ /* Only interrupt boot if special string is typed */ -#define CONFIG_AUTOBOOT_KEYED 1 -#define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds\n" +#define CONFIG_AUTOBOOT_KEYED 1 +#define CONFIG_AUTOBOOT_PROMPT \ + "Autobooting in %d seconds\n", bootdelay #undef CONFIG_AUTOBOOT_DELAY_STR #undef CONFIG_AUTOBOOT_STOP_STR /* defined via environment var */ #define CONFIG_AUTOBOOT_STOP_STR2 "esdesd" /* esd special for esd access*/ diff --git a/include/configs/DU440.h b/include/configs/DU440.h index 0f5f85c..64c9ac0 100644 --- a/include/configs/DU440.h +++ b/include/configs/DU440.h @@ -345,8 +345,9 @@ int du440_phy_addr(int devnum); #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ -#define CONFIG_AUTOBOOT_KEYED 1 -#define CONFIG_AUTOBOOT_PROMPT "Press SPACE to abort autoboot in %d seconds\n" +#define CONFIG_AUTOBOOT_KEYED 1 +#define CONFIG_AUTOBOOT_PROMPT \ + "Press SPACE to abort autoboot in %d seconds\n", bootdelay #define CONFIG_AUTOBOOT_DELAY_STR "d" #define CONFIG_AUTOBOOT_STOP_STR " " diff --git a/include/configs/FADS860T.h b/include/configs/FADS860T.h index 18de6b0..38295c4 100644 --- a/include/configs/FADS860T.h +++ b/include/configs/FADS860T.h @@ -38,7 +38,7 @@ #define CONFIG_DRAM_50MHZ 1 #define CONFIG_SDRAM_50MHZ 1 -#include "fads.h" +#include "../../board/fads/fads.h" #ifdef USE_REAL_FLASH_VALUES /* diff --git a/include/configs/GTH.h b/include/configs/GTH.h index 00e09f7..461670a 100644 --- a/include/configs/GTH.h +++ b/include/configs/GTH.h @@ -62,8 +62,9 @@ /* Only interrupt boot if space is pressed */ /* If a long serial cable is connected but */ /* other end is dead, garbage will be read */ -#define CONFIG_AUTOBOOT_KEYED 1 -#define CONFIG_AUTOBOOT_PROMPT "Press space to abort autoboot in %d second\n" +#define CONFIG_AUTOBOOT_KEYED 1 +#define CONFIG_AUTOBOOT_PROMPT \ + "Press space to abort autoboot in %d second\n", bootdelay #define CONFIG_AUTOBOOT_DELAY_STR "d" #define CONFIG_AUTOBOOT_STOP_STR " " diff --git a/include/configs/KUP4K.h b/include/configs/KUP4K.h index f6c31ea..e52fbfd 100644 --- a/include/configs/KUP4K.h +++ b/include/configs/KUP4K.h @@ -488,7 +488,8 @@ #define CONFIG_AUTOBOOT_KEYED /* use key strings to stop autoboot */ #if 0 -#define CONFIG_AUTOBOOT_PROMPT "Boote in %d Sekunden - stop mit \"2\"\n" +#define CONFIG_AUTOBOOT_PROMPT \ + "Boote in %d Sekunden - stop mit \"2\"\n", bootdelay #endif #define CONFIG_AUTOBOOT_STOP_STR "." /* easy to stop for now */ #define CONFIG_SILENT_CONSOLE 1 diff --git a/include/configs/KUP4X.h b/include/configs/KUP4X.h index e558aa4..be0c7af 100644 --- a/include/configs/KUP4X.h +++ b/include/configs/KUP4X.h @@ -454,7 +454,8 @@ #define CONFIG_AUTOBOOT_KEYED /* use key strings to stop autoboot */ #if 0 -#define CONFIG_AUTOBOOT_PROMPT "Boote in %d Sekunden - stop mit \"2\"\n" +#define CONFIG_AUTOBOOT_PROMPT \ + "Boote in %d Sekunden - stop mit \"2\"\n", bootdelay #endif #define CONFIG_AUTOBOOT_STOP_STR "." /* easy to stop for now */ #define CONFIG_SILENT_CONSOLE 1 diff --git a/include/configs/MPC86xADS.h b/include/configs/MPC86xADS.h index e0e8554..233a8d1 100644 --- a/include/configs/MPC86xADS.h +++ b/include/configs/MPC86xADS.h @@ -41,7 +41,7 @@ #define CONFIG_DRAM_50MHZ 1 #define CONFIG_SDRAM_50MHZ 1 -#include "fads.h" +#include "../../board/fads/fads.h" #define CFG_OR5_PRELIM 0xFFFF8110 /* 64Kbyte address space */ #define CFG_BR5_PRELIM (CFG_PHYDEV_ADDR | BR_PS_8 | BR_V) diff --git a/include/configs/MPC885ADS.h b/include/configs/MPC885ADS.h index 1867c5b..f4d1842 100644 --- a/include/configs/MPC885ADS.h +++ b/include/configs/MPC885ADS.h @@ -27,7 +27,7 @@ #define CONFIG_SDRAM_50MHZ 1 -#include "fads.h" +#include "../../board/fads/fads.h" #define CFG_OR5_PRELIM 0xFFFF8110 /* 64Kbyte address space */ #define CFG_BR5_PRELIM (CFG_PHYDEV_ADDR | BR_PS_8 | BR_V) diff --git a/include/configs/MVBC_P.h b/include/configs/MVBC_P.h index 04580b7..8c8a445 100644 --- a/include/configs/MVBC_P.h +++ b/include/configs/MVBC_P.h @@ -40,7 +40,7 @@ #define CONFIG_MISC_INIT_R 1 #define CFG_CACHELINE_SIZE 32 -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#ifdef (CONFIG_CMD_KGDB) #define CFG_CACHELINE_SHIFT 5 #endif @@ -255,7 +255,7 @@ #define CONFIG_NET_RETRY_COUNT 5 #define CONFIG_E1000 -#define CONFIG_E1000_FALLBACK_MAC 0xb6b445ebfbc0 +#define CONFIG_E1000_FALLBACK_MAC { 0xb6, 0xb4, 0x45, 0xeb, 0xfb, 0xc0 } #undef CONFIG_MPC5xxx_FEC #undef CONFIG_PHY_ADDR #define CONFIG_NETDEV eth0 @@ -268,7 +268,7 @@ #define CFG_PROMPT_HUSH_PS2 "> " #undef CFG_LONGHELP #define CFG_PROMPT "=> " -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#ifdef (CONFIG_CMD_KGDB) #define CFG_CBSIZE 1024 #else #define CFG_CBSIZE 256 diff --git a/include/configs/MVBLUE.h b/include/configs/MVBLUE.h index d08d795..8e247af 100644 --- a/include/configs/MVBLUE.h +++ b/include/configs/MVBLUE.h @@ -59,17 +59,18 @@ #define CONFIG_CLOCKS_IN_MHZ 1 -#define CONFIG_BOARD_TYPES 1 +#define CONFIG_BOARD_TYPES 1 #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOT_RETRY_TIME -1 #define CONFIG_AUTOBOOT_KEYED -#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds (stop with 's')...\n" +#define CONFIG_AUTOBOOT_PROMPT \ + "autoboot in %d seconds (stop with 's')...\n", bootdelay #define CONFIG_AUTOBOOT_STOP_STR "s" #define CONFIG_ZERO_BOOTDELAY_CHECK #define CONFIG_RESET_TO_RETRY 60 diff --git a/include/configs/NC650.h b/include/configs/NC650.h index 0b09482..84c6e9b 100644 --- a/include/configs/NC650.h +++ b/include/configs/NC650.h @@ -65,9 +65,10 @@ #define CFG_MEASURE_CPUCLK #define CFG_8XX_XIN CONFIG_8xx_OSCLK -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ #define CONFIG_AUTOBOOT_KEYED -#define CONFIG_AUTOBOOT_PROMPT "\nEnter password - autoboot in %d seconds...\n" +#define CONFIG_AUTOBOOT_PROMPT \ + "\nEnter password - autoboot in %d seconds...\n", bootdelay #define CONFIG_AUTOBOOT_DELAY_STR "ids" #define CONFIG_BOOT_RETRY_TIME 900 #define CONFIG_BOOT_RETRY_MIN 30 diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h index 0bd77c0..a3d1c56 100644 --- a/include/configs/PLU405.h +++ b/include/configs/PLU405.h @@ -154,8 +154,9 @@ /* Only interrupt boot if space is pressed */ /* If a long serial cable is connected but */ /* other end is dead, garbage will be read */ -#define CONFIG_AUTOBOOT_KEYED 1 -#define CONFIG_AUTOBOOT_PROMPT "Press SPACE to abort autoboot in %d seconds\n" +#define CONFIG_AUTOBOOT_KEYED 1 +#define CONFIG_AUTOBOOT_PROMPT \ + "Press SPACE to abort autoboot in %d seconds\n", bootdelay #undef CONFIG_AUTOBOOT_DELAY_STR #define CONFIG_AUTOBOOT_STOP_STR " " diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h index e8b405a..42f1d8d 100644 --- a/include/configs/PMC440.h +++ b/include/configs/PMC440.h @@ -409,7 +409,8 @@ #define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ #define CONFIG_AUTOBOOT_KEYED 1 -#define CONFIG_AUTOBOOT_PROMPT "Press SPACE to abort autoboot in %d seconds\n" +#define CONFIG_AUTOBOOT_PROMPT \ + "Press SPACE to abort autoboot in %d seconds\n", bootdelay #undef CONFIG_AUTOBOOT_DELAY_STR #define CONFIG_AUTOBOOT_STOP_STR " " diff --git a/include/configs/RPXlite_DW.h b/include/configs/RPXlite_DW.h index 872765c..faae407 100644 --- a/include/configs/RPXlite_DW.h +++ b/include/configs/RPXlite_DW.h @@ -68,7 +68,8 @@ #ifdef DEPLOYMENT #define CONFIG_BOOT_RETRY_TIME -1 #define CONFIG_AUTOBOOT_KEYED -#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds (stop with 'st')...\n" +#define CONFIG_AUTOBOOT_PROMPT \ + "autoboot in %d seconds (stop with 'st')...\n", bootdelay #define CONFIG_AUTOBOOT_STOP_STR "st" #define CONFIG_ZERO_BOOTDELAY_CHECK #define CONFIG_RESET_TO_RETRY 1 diff --git a/include/configs/SXNI855T.h b/include/configs/SXNI855T.h index 3aee45c..aefc7ee 100644 --- a/include/configs/SXNI855T.h +++ b/include/configs/SXNI855T.h @@ -465,7 +465,7 @@ #if 1 #define CONFIG_AUTOBOOT_KEYED /* use key strings to stop autoboot */ -#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n" +#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n", bootdelay #define CONFIG_AUTOBOOT_DELAY_STR "delayabit" #define CONFIG_AUTOBOOT_STOP_STR " " /* easy to stop for now */ #endif diff --git a/include/configs/adsvix.h b/include/configs/adsvix.h deleted file mode 100644 index 427b548..0000000 --- a/include/configs/adsvix.h +++ /dev/null @@ -1,365 +0,0 @@ -/* - * (C) Copyright 2004 - * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net - * - * (C) Copyright 2002 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * Configuation settings for the LUBBOCK board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_PXA27X 1 /* This is an PXA27x CPU */ -#define CONFIG_ADSVIX 1 /* on a Adsvix Board */ -#define CONFIG_MMC 1 -#define BOARD_LATE_INIT 1 - -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - -#define RTC - -/* - * Size of malloc() pool - */ -#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) -#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ - -/* - * Hardware drivers - */ - -/* - * select serial console configuration - */ -#define CONFIG_FFUART 1 /* we use FFUART on ADSVIX */ - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAUDRATE 38400 - -#define CONFIG_DOS_PARTITION 1 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_FAT -#define CONFIG_CMD_IDE -#define CONFIG_CMD_MMC -#define CONFIG_CMD_PCMCIA - -#undef CONFIG_CMD_NET - - -#undef CONFIG_SHOW_BOOT_PROGRESS - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_SERVERIP 192.168.1.99 -#define CONFIG_BOOTCOMMAND "run boot_flash" -#define CONFIG_BOOTARGS "console=ttyS0,38400 ramdisk_size=12288"\ - " rw root=/dev/ram initrd=0xa0800000,5m" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "program_boot_cf=" \ - "mw.b 0xa0010000 0xff 0x20000; " \ - "if pinit on && " \ - "ide reset && " \ - "fatload ide 0 0xa0010000 u-boot.bin; " \ - "then " \ - "protect off 0x0 0x1ffff; " \ - "erase 0x0 0x1ffff; " \ - "cp.b 0xa0010000 0x0 0x20000; " \ - "fi\0" \ - "program_uzImage_cf=" \ - "mw.b 0xa0010000 0xff 0x180000; " \ - "if pinit on && " \ - "ide reset && " \ - "fatload ide 0 0xa0010000 uzImage; " \ - "then " \ - "protect off 0x40000 0x1bffff; " \ - "erase 0x40000 0x1bffff; " \ - "cp.b 0xa0010000 0x40000 0x180000; " \ - "fi\0" \ - "program_ramdisk_cf=" \ - "mw.b 0xa0010000 0xff 0x500000; " \ - "if pinit on && " \ - "ide reset && " \ - "fatload ide 0 0xa0010000 ramdisk.gz; " \ - "then " \ - "protect off 0x1c0000 0x6bffff; " \ - "erase 0x1c0000 0x6bffff; " \ - "cp.b 0xa0010000 0x1c0000 0x500000; " \ - "fi\0" \ - "boot_cf=" \ - "if pinit on && " \ - "ide reset && " \ - "fatload ide 0 0xa0030000 uzImage && " \ - "fatload ide 0 0xa0800000 ramdisk.gz; " \ - "then " \ - "bootm 0xa0030000; " \ - "fi\0" \ - "program_boot_mmc=" \ - "mw.b 0xa0010000 0xff 0x20000; " \ - "if mmcinit && " \ - "fatload mmc 0 0xa0010000 u-boot.bin; " \ - "then " \ - "protect off 0x0 0x1ffff; " \ - "erase 0x0 0x1ffff; " \ - "cp.b 0xa0010000 0x0 0x20000; " \ - "fi\0" \ - "program_uzImage_mmc=" \ - "mw.b 0xa0010000 0xff 0x180000; " \ - "if mmcinit && " \ - "fatload mmc 0 0xa0010000 uzImage; " \ - "then " \ - "protect off 0x40000 0x1bffff; " \ - "erase 0x40000 0x1bffff; " \ - "cp.b 0xa0010000 0x40000 0x180000; " \ - "fi\0" \ - "program_ramdisk_mmc=" \ - "mw.b 0xa0010000 0xff 0x500000; " \ - "if mmcinit && " \ - "fatload mmc 0 0xa0010000 ramdisk.gz; " \ - "then " \ - "protect off 0x1c0000 0x6bffff; " \ - "erase 0x1c0000 0x6bffff; " \ - "cp.b 0xa0010000 0x1c0000 0x500000; " \ - "fi\0" \ - "boot_mmc=" \ - "if mmcinit && " \ - "fatload mmc 0 0xa0030000 uzImage && " \ - "fatload mmc 0 0xa0800000 ramdisk.gz; " \ - "then " \ - "bootm 0xa0030000; " \ - "fi\0" \ - "boot_flash=" \ - "cp.b 0x1c0000 0xa0800000 0x500000; " \ - "bootm 0x40000\0" \ - -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -/* #define CONFIG_INITRD_TAG 1 */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ -#endif - -/* - * Miscellaneous configurable options - */ -#define CFG_HUSH_PARSER 1 -#define CFG_PROMPT_HUSH_PS2 "> " - -#define CFG_LONGHELP /* undef to save memory */ -#ifdef CFG_HUSH_PARSER -#define CFG_PROMPT "$ " /* Monitor Command Prompt */ -#else -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#endif -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_DEVICE_NULLDEV 1 - -#define CFG_MEMTEST_START 0xa0400000 /* memtest works on */ -#define CFG_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ - -#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ - -#define CFG_LOAD_ADDR 0xa1000000 /* default load address */ - -#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */ -#define CFG_CPUSPEED 0x207 /* need to look more closely, I think this is Turbo = 2x, L=91Mhz */ - - /* valid baudrates */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -#define CFG_MMC_BASE 0xF0000000 - -/* - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/* - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */ -#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ -#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */ -#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */ -#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */ -#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */ -#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */ -#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */ - -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ - -#define CFG_DRAM_BASE 0xa0000000 -#define CFG_DRAM_SIZE 0x04000000 - -#define CFG_FLASH_BASE PHYS_FLASH_1 - -/* - * GPIO settings - */ - -#define CFG_GPSR0_VAL 0x00018004 -#define CFG_GPSR1_VAL 0x004F0080 -#define CFG_GPSR2_VAL 0x13EFC000 -#define CFG_GPSR3_VAL 0x0006E032 -#define CFG_GPCR0_VAL 0x084AFE1A -#define CFG_GPCR1_VAL 0x003003F2 -#define CFG_GPCR2_VAL 0x0C014000 -#define CFG_GPCR3_VAL 0x00000C00 -#define CFG_GPDR0_VAL 0xCBC3BFFC -#define CFG_GPDR1_VAL 0x00FFABF3 -#define CFG_GPDR2_VAL 0x1EEFFC00 -#define CFG_GPDR3_VAL 0x0187EC32 -#define CFG_GAFR0_L_VAL 0x84400000 -#define CFG_GAFR0_U_VAL 0xA51A8010 -#define CFG_GAFR1_L_VAL 0x699A955A -#define CFG_GAFR1_U_VAL 0x0005A0AA -#define CFG_GAFR2_L_VAL 0x40000000 -#define CFG_GAFR2_U_VAL 0x0109A400 -#define CFG_GAFR3_L_VAL 0x54000000 -#define CFG_GAFR3_U_VAL 0x00001409 - -#define CFG_PSSR_VAL 0x20 - -/* - * Clock settings - */ -#define CFG_CKEN 0x00400200 -#define CFG_CCCR 0x02000290 /* 520Mhz */ -/* #define CFG_CCCR 0x02000210 416 Mhz */ - -/* - * Memory settings - */ - -#define CFG_MSC0_VAL 0x23F2B3DB -#define CFG_MSC1_VAL 0x0000CCD1 -#define CFG_MSC2_VAL 0x0000B884 -#define CFG_MDCNFG_VAL 0x08000AC8 -#define CFG_MDREFR_VAL 0x0000001E -#define CFG_MDMRS_VAL 0x00000000 - -#define CFG_FLYCNFG_VAL 0x00010001 -#define CFG_SXCNFG_VAL 0x40044004 - -/* - * PCMCIA and CF Interfaces - */ -#define CFG_MECR_VAL 0x00000002 -#define CFG_MCMEM0_VAL 0x00004204 -#define CFG_MCMEM1_VAL 0x00000000 -#define CFG_MCATT0_VAL 0x00010504 -#define CFG_MCATT1_VAL 0x00000000 -#define CFG_MCIO0_VAL 0x00008407 -#define CFG_MCIO1_VAL 0x00000000 - -#define CONFIG_PXA_PCMCIA 1 -#define CONFIG_PXA_IDE 1 - -#define CONFIG_PCMCIA_SLOT_A 1 -/* just to keep build system happy */ - -#define CFG_PCMCIA_MEM_ADDR 0x28000000 -#define CFG_PCMCIA_MEM_SIZE 0x04000000 - - -#define CFG_IDE_MAXBUS 1 -/* max. 1 IDE bus */ -#define CFG_IDE_MAXDEVICE 1 -/* max. 1 drive per IDE bus */ - -#define CFG_ATA_IDE0_OFFSET 0x0000 - -#define CFG_ATA_BASE_ADDR 0x20000000 - -/* Offset for data I/O */ -#define CFG_ATA_DATA_OFFSET 0x1f0 - -/* Offset for normal register accesses */ -#define CFG_ATA_REG_OFFSET 0x1f0 - -/* Offset for alternate registers */ -#define CFG_ATA_ALT_OFFSET 0x3f0 - -/* - * FLASH and environment organization - */ - -#define CFG_FLASH_CFI -#define CFG_FLASH_CFI_DRIVER 1 - -#define CFG_MONITOR_BASE 0 -#define CFG_MONITOR_LEN 0x20000 - -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 4 + 255 /* max number of sectors on one chip */ - -/* timeout values are in ticks */ -#define CFG_FLASH_ERASE_TOUT (25*CFG_HZ) /* Timeout for Flash Erase */ -#define CFG_FLASH_WRITE_TOUT (25*CFG_HZ) /* Timeout for Flash Write */ - -/* write flash less slowly */ -#define CFG_FLASH_USE_BUFFER_WRITE 1 - -/* Flash environment locations */ -#define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_ADDR (PHYS_FLASH_1 + CFG_MONITOR_LEN) /* Addr of Environment Sector */ -#define CFG_ENV_SIZE 0x20000 /* Total Size of Environment */ -#define CFG_ENV_SECT_SIZE 0x20000 /* Total Size of Environment Sector */ - -#endif /* __CONFIG_H */ diff --git a/include/configs/apollon.h b/include/configs/apollon.h index 8973296..5884611 100644 --- a/include/configs/apollon.h +++ b/include/configs/apollon.h @@ -103,14 +103,6 @@ */ #define CONFIG_SERIAL1 1 /* UART1 on H4 */ - /* - * I2C configuration - */ -#define CONFIG_HARD_I2C -#define CFG_I2C_SPEED 100000 -#define CFG_I2C_SLAVE 1 -#define CONFIG_DRIVER_OMAP24XX_I2C - /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h index 951ce16..cd2eae2 100644 --- a/include/configs/at91rm9200dk.h +++ b/include/configs/at91rm9200dk.h @@ -112,16 +112,11 @@ */ #include <config_cmd_default.h> -#define CONFIG_CMD_MII #define CONFIG_CMD_DHCP +#define CONFIG_CMD_MII +#define CONFIG_CMD_NAND -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_AUTOSCRIPT -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_MISC -#undef CONFIG_CMD_LOADS - +#define CFG_NAND_LEGACY #define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define SECTORSIZE 512 @@ -137,6 +132,7 @@ #define AT91_SMART_MEDIA_ALE (1 << 22) /* our ALE is AD22 */ #define AT91_SMART_MEDIA_CLE (1 << 21) /* our CLE is AD21 */ +#include <asm/arch/AT91RM9200.h> /* needed for port definitions */ #define NAND_DISABLE_CE(nand) do { *AT91C_PIOC_SODR = AT91C_PIO_PC0;} while(0) #define NAND_ENABLE_CE(nand) do { *AT91C_PIOC_CODR = AT91C_PIO_PC0;} while(0) diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h index 84d235e..f040b86 100644 --- a/include/configs/atngw100.h +++ b/include/configs/atngw100.h @@ -82,8 +82,8 @@ #define CONFIG_BOOTDELAY 1 #define CONFIG_AUTOBOOT 1 #define CONFIG_AUTOBOOT_KEYED 1 -#define CONFIG_AUTOBOOT_PROMPT \ - "Press SPACE to abort autoboot in %d seconds\n" +#define CONFIG_AUTOBOOT_PROMPT \ + "Press SPACE to abort autoboot in %d seconds\n", bootdelay #define CONFIG_AUTOBOOT_DELAY_STR "d" #define CONFIG_AUTOBOOT_STOP_STR " " diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h index 90910bb..68f0cec 100644 --- a/include/configs/atstk1002.h +++ b/include/configs/atstk1002.h @@ -110,8 +110,8 @@ #define CONFIG_BOOTDELAY 1 #define CONFIG_AUTOBOOT 1 #define CONFIG_AUTOBOOT_KEYED 1 -#define CONFIG_AUTOBOOT_PROMPT \ - "Press SPACE to abort autoboot in %d seconds\n" +#define CONFIG_AUTOBOOT_PROMPT \ + "Press SPACE to abort autoboot in %d seconds\n", bootdelay #define CONFIG_AUTOBOOT_DELAY_STR "d" #define CONFIG_AUTOBOOT_STOP_STR " " diff --git a/include/configs/atstk1003.h b/include/configs/atstk1003.h index 03472a8..d3a2f69 100644 --- a/include/configs/atstk1003.h +++ b/include/configs/atstk1003.h @@ -110,8 +110,8 @@ #define CONFIG_BOOTDELAY 1 #define CONFIG_AUTOBOOT 1 #define CONFIG_AUTOBOOT_KEYED 1 -#define CONFIG_AUTOBOOT_PROMPT \ - "Press SPACE to abort autoboot in %d seconds\n" +#define CONFIG_AUTOBOOT_PROMPT \ + "Press SPACE to abort autoboot in %d seconds\n", bootdelay #define CONFIG_AUTOBOOT_DELAY_STR "d" #define CONFIG_AUTOBOOT_STOP_STR " " diff --git a/include/configs/atstk1004.h b/include/configs/atstk1004.h index 07add82..a37ba92 100644 --- a/include/configs/atstk1004.h +++ b/include/configs/atstk1004.h @@ -110,8 +110,8 @@ #define CONFIG_BOOTDELAY 1 #define CONFIG_AUTOBOOT 1 #define CONFIG_AUTOBOOT_KEYED 1 -#define CONFIG_AUTOBOOT_PROMPT \ - "Press SPACE to abort autoboot in %d seconds\n" +#define CONFIG_AUTOBOOT_PROMPT \ + "Press SPACE to abort autoboot in %d seconds\n", bootdelay #define CONFIG_AUTOBOOT_DELAY_STR "d" #define CONFIG_AUTOBOOT_STOP_STR " " diff --git a/include/configs/atstk1006.h b/include/configs/atstk1006.h index f9af675..a6c5b6e 100644 --- a/include/configs/atstk1006.h +++ b/include/configs/atstk1006.h @@ -110,8 +110,8 @@ #define CONFIG_BOOTDELAY 1 #define CONFIG_AUTOBOOT 1 #define CONFIG_AUTOBOOT_KEYED 1 -#define CONFIG_AUTOBOOT_PROMPT \ - "Press SPACE to abort autoboot in %d seconds\n" +#define CONFIG_AUTOBOOT_PROMPT \ + "Press SPACE to abort autoboot in %d seconds\n", bootdelay #define CONFIG_AUTOBOOT_DELAY_STR "d" #define CONFIG_AUTOBOOT_STOP_STR " " diff --git a/include/configs/csb637.h b/include/configs/csb637.h index e9c6d8e..735a211 100644 --- a/include/configs/csb637.h +++ b/include/configs/csb637.h @@ -114,17 +114,11 @@ */ #include <config_cmd_default.h> -#define CONFIG_CMD_JFFS2 #define CONFIG_CMD_DHCP +#define CONFIG_CMD_JFFS2 #define CONFIG_CMD_PING -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_AUTOSCRIPT -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_MISC -#undef CONFIG_CMD_LOADS - +#ifdef NAND_SUPPORT_HAS_BEEN_FIXED /* NAND support is broken / unimplemented */ #define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define SECTORSIZE 512 @@ -140,6 +134,7 @@ #define AT91_SMART_MEDIA_ALE (1 << 22) /* our ALE is AD22 */ #define AT91_SMART_MEDIA_CLE (1 << 21) /* our CLE is AD21 */ +#include <asm/arch/AT91RM9200.h> /* needed for port definitions */ #define NAND_DISABLE_CE(nand) do { *AT91C_PIOC_SODR = AT91C_PIO_PC0;} while(0) #define NAND_ENABLE_CE(nand) do { *AT91C_PIOC_CODR = AT91C_PIO_PC0;} while(0) @@ -155,6 +150,8 @@ #define NAND_CTL_CLRCLE(nandptr) #define NAND_CTL_SETCLE(nandptr) +#endif /* NAND_SUPPORT_HAS_BEEN_FIXED */ + #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM 0x20000000 #define PHYS_SDRAM_SIZE 0x4000000 /* 64 megs */ diff --git a/include/configs/gth2.h b/include/configs/gth2.h index c2d6ca7..7f7190b 100644 --- a/include/configs/gth2.h +++ b/include/configs/gth2.h @@ -54,8 +54,9 @@ /* Only interrupt boot if space is pressed */ /* If a long serial cable is connected but */ /* other end is dead, garbage will be read */ -#define CONFIG_AUTOBOOT_KEYED 1 -#define CONFIG_AUTOBOOT_PROMPT "Press space to abort autoboot in %d second\n" +#define CONFIG_AUTOBOOT_KEYED 1 +#define CONFIG_AUTOBOOT_PROMPT \ + "Press space to abort autoboot in %d second\n", bootdelay #define CONFIG_AUTOBOOT_DELAY_STR "d" #define CONFIG_AUTOBOOT_STOP_STR " " diff --git a/include/configs/gw8260.h b/include/configs/gw8260.h index 7c2c224..d918782 100644 --- a/include/configs/gw8260.h +++ b/include/configs/gw8260.h @@ -279,7 +279,8 @@ * To stop use: " " */ #define CONFIG_AUTOBOOT_KEYED -#define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds, press \" \" to stop\n" +#define CONFIG_AUTOBOOT_PROMPT \ + "Autobooting in %d seconds, press \" \" to stop\n", bootdelay #define CONFIG_AUTOBOOT_STOP_STR " " #undef CONFIG_AUTOBOOT_DELAY_STR #define DEBUG_BOOTKEYS 0 diff --git a/include/configs/hymod.h b/include/configs/hymod.h index 01e7970..264192f 100644 --- a/include/configs/hymod.h +++ b/include/configs/hymod.h @@ -224,7 +224,7 @@ */ #define CONFIG_AUTOBOOT_KEYED #define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds, " \ - "press <SPACE> to stop\n" + "press <SPACE> to stop\n", bootdelay #define CONFIG_AUTOBOOT_STOP_STR " " #undef CONFIG_AUTOBOOT_DELAY_STR #define DEBUG_BOOTKEYS 0 diff --git a/include/configs/linkstation.h b/include/configs/linkstation.h index d3908b9..bc64294 100644 --- a/include/configs/linkstation.h +++ b/include/configs/linkstation.h @@ -82,7 +82,8 @@ #undef CONFIG_BOOT_RETRY_TIME #define CONFIG_AUTOBOOT_KEYED -#define CONFIG_AUTOBOOT_PROMPT "Boot in %02d seconds ('s' to stop)..." +#define CONFIG_AUTOBOOT_PROMPT \ + "Boot in %02d seconds ('s' to stop)...", bootdelay #define CONFIG_AUTOBOOT_STOP_STR "s" #define CONFIG_CMD_IDE diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h index 8a82702..87abfba 100644 --- a/include/configs/lwmon.h +++ b/include/configs/lwmon.h @@ -252,7 +252,8 @@ #define CONFIG_POST_KEY_MAGIC "3C+3E" /* press F3 + F5 keys to force POST */ #if 0 #define CONFIG_AUTOBOOT_KEYED /* Enable "password" protection */ -#define CONFIG_AUTOBOOT_PROMPT "\nEnter password - autoboot in %d sec...\n" +#define CONFIG_AUTOBOOT_PROMPT \ + "\nEnter password - autoboot in %d sec...\n", bootdelay #define CONFIG_AUTOBOOT_DELAY_STR " " /* "password" */ #endif /*----------------------------------------------------------------------*/ diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index cf406c8..2f3a066 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -277,7 +277,8 @@ #define CONFIG_POST_KEY_MAGIC "3C+3E" /* press F3 + F5 keys to force POST */ #if 0 #define CONFIG_AUTOBOOT_KEYED /* Enable "password" protection */ -#define CONFIG_AUTOBOOT_PROMPT "\nEnter password - autoboot in %d sec...\n" +#define CONFIG_AUTOBOOT_PROMPT \ + "\nEnter password - autoboot in %d sec...\n", bootdelay #define CONFIG_AUTOBOOT_DELAY_STR " " /* "password" */ #endif diff --git a/include/configs/m501sk.h b/include/configs/m501sk.h index 095fdaf..e4be1ed 100644 --- a/include/configs/m501sk.h +++ b/include/configs/m501sk.h @@ -40,7 +40,6 @@ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_INITRD_TAG 1 -#undef CONFIG_AUTOBOOT_PROMPT #define CONFIG_MENUPROMPT "." /* @@ -105,7 +104,7 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "unlock=yes\0" -#define CFG_CMD_JFFS2 +#define CONFIG_CMD_JFFS2 #undef CONFIG_CMD_EEPROM #define CONFIG_CMD_NET #define CONFIG_CMD_RUN diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h index b6843af..3d1eafe 100644 --- a/include/configs/motionpro.h +++ b/include/configs/motionpro.h @@ -96,7 +96,7 @@ #undef CONFIG_AUTOBOOT_DELAY_STR #undef CONFIG_BOOTARGS #define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds, " \ - "press \"<Esc><Esc>\" to stop\n" + "press \"<Esc><Esc>\" to stop\n", bootdelay #define CONFIG_ETHADDR 00:50:C2:40:10:00 #define CONFIG_OVERWRITE_ETHADDR_ONCE 1 diff --git a/include/configs/mp2usb.h b/include/configs/mp2usb.h index 2eb4af1..87264fb 100644 --- a/include/configs/mp2usb.h +++ b/include/configs/mp2usb.h @@ -230,7 +230,8 @@ #undef CONFIG_SILENT_CONSOLE /* enable silent startup */ #define CONFIG_AUTOBOOT_KEYED -#define CONFIG_AUTOBOOT_PROMPT "Press SPACE to abort autoboot in %d seconds\n" +#define CONFIG_AUTOBOOT_PROMPT \ + "Press SPACE to abort autoboot in %d seconds\n", bootdelay #define CONFIG_AUTOBOOT_STOP_STR " " #define CONFIG_AUTOBOOT_DELAY_STR "d" diff --git a/include/configs/netstar.h b/include/configs/netstar.h index d4deda4..756b7c2 100644 --- a/include/configs/netstar.h +++ b/include/configs/netstar.h @@ -195,7 +195,8 @@ #if 0 /* feel free to disable for development */ #define CONFIG_AUTOBOOT_KEYED /* Enable password protection */ -#define CONFIG_AUTOBOOT_PROMPT "\nNetStar PBX - boot in %d secs...\n" +#define CONFIG_AUTOBOOT_PROMPT \ + "\nNetStar PBX - boot in %d secs...\n", bootdelay #define CONFIG_AUTOBOOT_DELAY_STR "." /* 1st "password" */ #endif diff --git a/include/configs/ppmc8260.h b/include/configs/ppmc8260.h index 56b4d92..dee6643 100644 --- a/include/configs/ppmc8260.h +++ b/include/configs/ppmc8260.h @@ -228,7 +228,8 @@ * To stop use: " " */ # define CONFIG_AUTOBOOT_KEYED -# define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds, press \" \" to stop\n" +# define CONFIG_AUTOBOOT_PROMPT \ + "Autobooting in %d seconds, press \" \" to stop\n", bootdelay # define CONFIG_AUTOBOOT_STOP_STR " " # undef CONFIG_AUTOBOOT_DELAY_STR # define DEBUG_BOOTKEYS 0 diff --git a/include/configs/quantum.h b/include/configs/quantum.h index f49e2b0..cc261c3 100644 --- a/include/configs/quantum.h +++ b/include/configs/quantum.h @@ -116,7 +116,8 @@ #define CONFIG_AUTOBOOT_KEYED /* Enable password protection */ -#define CONFIG_AUTOBOOT_PROMPT "\nEnter password - autoboot in %d sec...\n" +#define CONFIG_AUTOBOOT_PROMPT \ + "\nEnter password - autoboot in %d sec...\n", bootdelay #define CONFIG_AUTOBOOT_DELAY_STR "system" /* * Miscellaneous configurable options diff --git a/include/configs/rmu.h b/include/configs/rmu.h index 28fb7c3..596bf15 100644 --- a/include/configs/rmu.h +++ b/include/configs/rmu.h @@ -111,7 +111,8 @@ #define CONFIG_AUTOBOOT_KEYED /* Enable password protection */ -#define CONFIG_AUTOBOOT_PROMPT "\nEnter password - autoboot in %d sec...\n" +#define CONFIG_AUTOBOOT_PROMPT \ + "\nEnter password - autoboot in %d sec...\n", bootdelay #define CONFIG_AUTOBOOT_DELAY_STR "system" /* diff --git a/include/configs/sacsng.h b/include/configs/sacsng.h index 2a398e8..8427752 100644 --- a/include/configs/sacsng.h +++ b/include/configs/sacsng.h @@ -436,7 +436,7 @@ * To stop use: " " */ #define CONFIG_AUTOBOOT_KEYED -#define CONFIG_AUTOBOOT_PROMPT "Autobooting...\n" +#define CONFIG_AUTOBOOT_PROMPT "Autobooting...\n" #define CONFIG_AUTOBOOT_STOP_STR " " #undef CONFIG_AUTOBOOT_DELAY_STR #define CONFIG_ZERO_BOOTDELAY_CHECK diff --git a/include/configs/sbc8260.h b/include/configs/sbc8260.h index 7993137..b92344c 100644 --- a/include/configs/sbc8260.h +++ b/include/configs/sbc8260.h @@ -306,7 +306,8 @@ */ #undef CONFIG_AUTOBOOT_KEYED #ifdef CONFIG_AUTOBOOT_KEYED -# define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds, press \" \" to stop\n" +# define CONFIG_AUTOBOOT_PROMPT \ + "Autobooting in %d seconds, press \" \" to stop\n", bootdelay # define CONFIG_AUTOBOOT_STOP_STR " " # undef CONFIG_AUTOBOOT_DELAY_STR # define DEBUG_BOOTKEYS 0 diff --git a/include/configs/sc3.h b/include/configs/sc3.h index f6e40de..87311ea 100644 --- a/include/configs/sc3.h +++ b/include/configs/sc3.h @@ -132,7 +132,8 @@ #if 1 /* feel free to disable for development */ #define CONFIG_AUTOBOOT_KEYED /* Enable password protection */ -#define CONFIG_AUTOBOOT_PROMPT "\nSC3 - booting... stop with ENTER\n" +#define CONFIG_AUTOBOOT_PROMPT \ + "\nSC3 - booting... stop with ENTER\n" #define CONFIG_AUTOBOOT_DELAY_STR "\r" /* 1st "password" */ #define CONFIG_AUTOBOOT_DELAY_STR2 "\n" /* 1st "password" */ #endif diff --git a/include/configs/trab.h b/include/configs/trab.h index de36fca..b0615a0 100644 --- a/include/configs/trab.h +++ b/include/configs/trab.h @@ -289,7 +289,8 @@ #if 1 /* feel free to disable for development */ #define CONFIG_AUTOBOOT_KEYED /* Enable password protection */ -#define CONFIG_AUTOBOOT_PROMPT "\nEnter password - autoboot in %d sec...\n" +#define CONFIG_AUTOBOOT_PROMPT \ + "\nEnter password - autoboot in %d sec...\n", bootdelay #define CONFIG_AUTOBOOT_DELAY_STR "R" /* 1st "password" */ #endif diff --git a/include/configs/utx8245.h b/include/configs/utx8245.h index 287a618..1675ab7 100644 --- a/include/configs/utx8245.h +++ b/include/configs/utx8245.h @@ -58,7 +58,7 @@ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #define CONFIG_BOOTDELAY 2 -#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n" +#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n", bootdelay #define CONFIG_BOOTCOMMAND "run nfsboot" /* autoboot command */ #define CONFIG_BOOTARGS "root=/dev/ram console=ttyS0,57600" /* RAMdisk */ #define CONFIG_ETHADDR 00:AA:00:14:00:05 /* UTX5 */ diff --git a/lib_arm/board.c b/lib_arm/board.c index 80b149b..a093860 100644 --- a/lib_arm/board.c +++ b/lib_arm/board.c @@ -233,6 +233,18 @@ static int init_func_i2c (void) } #endif +#ifdef CONFIG_SKIP_RELOCATE_UBOOT +/* + * This routine sets the relocation done flag, because even if + * relocation is skipped, the flag is used by other generic code. + */ +static int reloc_init(void) +{ + gd->flags |= GD_FLG_RELOC; + return 0; +} +#endif + /* * Breathe some life into the board... * @@ -262,6 +274,11 @@ int print_cpuinfo (void); /* test-only */ init_fnc_t *init_sequence[] = { cpu_init, /* basic cpu dependent setup */ +#if defined(CONFIG_SKIP_RELOCATE_UBOOT) + reloc_init, /* Set the relocation done flag, must + do this AFTER cpu_init(), but as soon + as possible */ +#endif board_init, /* basic board dependent setup */ interrupt_init, /* set up exceptions */ env_init, /* initialize environment */ diff --git a/lib_m68k/time.c b/lib_m68k/time.c index 28d371d..6eba784 100644 --- a/lib_m68k/time.c +++ b/lib_m68k/time.c @@ -199,6 +199,11 @@ unsigned long long get_ticks(void) return get_timer(0); } +unsigned long usec2ticks(unsigned long usec) +{ + return get_timer(usec); +} + /* * This function is derived from PowerPC code (timebase clock frequency). * On M68K it returns the number of timer ticks per second. diff --git a/lib_sparc/board.c b/lib_sparc/board.c index af301c0..205a8ca 100644 --- a/lib_sparc/board.c +++ b/lib_sparc/board.c @@ -451,7 +451,7 @@ void board_init_f(ulong bootflag) if ((s = getenv("bootfile")) != NULL) { copy_filename(BootFile, s, sizeof(BootFile)); } -#endif /* CFG_CMD_NET */ +#endif /* CONFIG_CMD_NET */ WATCHDOG_RESET(); @@ -483,7 +483,7 @@ void board_init_f(ulong bootflag) WATCHDOG_RESET(); puts("IDE: "); ide_init(); -#endif /* CFG_CMD_IDE */ +#endif /* CONFIG_CMD_IDE */ #ifdef CONFIG_LAST_STAGE_INIT WATCHDOG_RESET(); diff --git a/nand_spl/board/amcc/kilauea/Makefile b/nand_spl/board/amcc/kilauea/Makefile index 0667fc1..cedc8e0 100644 --- a/nand_spl/board/amcc/kilauea/Makefile +++ b/nand_spl/board/amcc/kilauea/Makefile @@ -57,7 +57,7 @@ $(nandobj)u-boot-spl: $(OBJS) # create symbolic links for common files # from cpu directory -$(obj)44x_spd_ddr2.c: ecc.h +$(obj)44x_spd_ddr2.c: $(obj)ecc.h @rm -f $(obj)44x_spd_ddr2.c ln -s $(SRCTREE)/cpu/ppc4xx/44x_spd_ddr2.c $(obj)44x_spd_ddr2.c diff --git a/onenand_ipl/board/apollon/Makefile b/onenand_ipl/board/apollon/Makefile index f10ed02..1f996a4 100644 --- a/onenand_ipl/board/apollon/Makefile +++ b/onenand_ipl/board/apollon/Makefile @@ -1,6 +1,5 @@ include $(TOPDIR)/config.mk -include $(TOPDIR)/include/config.mk include $(TOPDIR)/onenand_ipl/board/$(BOARDDIR)/config.mk LDSCRIPT= $(TOPDIR)/onenand_ipl/board/$(BOARDDIR)/u-boot.onenand.lds @@ -9,8 +8,11 @@ AFLAGS += -DCONFIG_ONENAND_IPL CFLAGS += -DCONFIG_ONENAND_IPL OBJCLFAGS += --gap-fill=0x00 -SOBJS = start.o low_levelinit.o -COBJS = apollon.o onenand_read.o onenand_boot.o +SOBJS := low_levelinit.o +SOBJS += start.o +COBJS := apollon.o +COBJS += onenand_read.o +COBJS += onenand_boot.o SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c)) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) @@ -34,28 +36,39 @@ $(onenandobj)onenand-ipl.bin: $(onenandobj)onenand-ipl $(onenandobj)onenand-ipl: $(OBJS) cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \ - -Map $(onenandobj)onenand-ipl.map \ - -o $(onenandobj)onenand-ipl + -Map $@.map -o $@ # create symbolic links from common files # from cpu directory $(obj)start.S: - rm -f $(obj)start.S - ln -s $(SRCTREE)/cpu/$(CPU)/start.S $(obj)start.S + @rm -f $@ + ln -s $(SRCTREE)/cpu/$(CPU)/start.S $@ # from onenand_ipl directory $(obj)onenand_ipl.h: - rm -f $(obj)onenand_ipl.h - ln -s $(SRCTREE)/onenand_ipl/onenand_ipl.h $(obj)onenand_ipl.h + @rm -f $@ + ln -s $(SRCTREE)/onenand_ipl/onenand_ipl.h $@ $(obj)onenand_boot.c: $(obj)onenand_ipl.h - rm -f $(obj)onenand_boot.c - ln -s $(SRCTREE)/onenand_ipl/onenand_boot.c $(obj)onenand_boot.c + @rm -f $@ + ln -s $(SRCTREE)/onenand_ipl/onenand_boot.c $@ $(obj)onenand_read.c: $(obj)onenand_ipl.h - rm -f $(obj)onenand_read.c - ln -s $(SRCTREE)/onenand_ipl/onenand_read.c $(obj)onenand_read.c + @rm -f $@ + ln -s $(SRCTREE)/onenand_ipl/onenand_read.c $@ + +ifneq ($(OBJTREE), $(SRCTREE)) +$(obj)apollon.c: + @rm -f $@ + ln -s $(SRCTREE)/onenand_ipl/board/$(BOARDDIR)/apollon.c $@ + +$(obj)low_levelinit.S: + @rm -f $@ + ln -s $(SRCTREE)/onenand_ipl/board/$(BOARDDIR)/low_levelinit.S $@ +endif + +######################################################################### $(obj)%.o: $(obj)%.S $(CC) $(AFLAGS) -c -o $@ $< @@ -63,6 +76,9 @@ $(obj)%.o: $(obj)%.S $(obj)%.o: $(obj)$.c $(CC) $(CFLAGS) -c -o $@ $< +# defines $(obj).depend target include $(SRCTREE)/rules.mk sinclude $(obj).depend + +######################################################################### |