summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--CHANGELOG45
-rw-r--r--Makefile4
-rw-r--r--board/bc3450/bc3450.c5
-rw-r--r--board/emk/top5200/top5200.c6
-rw-r--r--board/esd/cpci5200/cpci5200.c8
-rw-r--r--board/esd/pf5200/pf5200.c12
-rw-r--r--board/icecube/icecube.c8
-rw-r--r--board/inka4x0/inka4x0.c15
-rw-r--r--board/tqm5200/tqm5200.c8
-rw-r--r--board/v38b/ethaddr.c91
-rw-r--r--board/v38b/u-boot.lds3
-rw-r--r--board/v38b/v38b.c104
-rw-r--r--include/configs/v38b.h (renamed from include/configs/V38B.h)189
-rw-r--r--include/mpc5xxx.h9
14 files changed, 244 insertions, 263 deletions
diff --git a/CHANGELOG b/CHANGELOG
index afb22b7..6efddd0 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -1,3 +1,48 @@
+commit 1954be6e9c9421b45d0a9d05b10356acc7563150
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Sun Oct 29 01:03:51 2006 +0200
+
+ Automatically adjust ARFLAGS so "make -s" is really silent.
+
+commit fae684e89844856383bdf101440889557df3e6b1
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Oct 28 16:45:00 2006 +0200
+
+ [PATCH] omap925.c: Remove unused functions
+
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1265581502ab8ea8c08e8edbe9bf64fbd62fd776
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Oct 28 17:12:58 2006 +0200
+
+ [PATCH] Add some missing machtypes for netstar & voiceblue boards
+
+ Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of
+ numbers in code.
+
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 856f054410cef52d868feb330168b2a4c4091328
+Author: Stefan Roese <sr@denx.de>
+Date: Sat Oct 28 15:55:52 2006 +0200
+
+ [PATCH] NAND: Partition name support added to NAND subsystem
+
+ chpart, nboot and NAND subsystem related commands now accept also partition
+ name to specify offset.
+
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 07a69a18c2ecfda904231fdf23e2523ea7792eb6
+Author: Wolfgang Denk <wd@pollux.denx.de>
+Date: Sat Oct 28 02:29:44 2006 +0200
+
+ Update CHANGELOG.
+
commit 2751a95abd1b96911081c357e96a12fa97b40dee
Author: Wolfgang Denk <wd@pollux.denx.de>
Date: Sat Oct 28 02:29:14 2006 +0200
diff --git a/Makefile b/Makefile
index e2fb6fd..4dd03b1 100644
--- a/Makefile
+++ b/Makefile
@@ -23,7 +23,7 @@
VERSION = 1
PATCHLEVEL = 1
-SUBLEVEL = 5
+SUBLEVEL = 6
EXTRAVERSION =
U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
VERSION_FILE = $(obj)include/version_autogenerated.h
@@ -412,7 +412,7 @@ icecube_5100_config: unconfig
@$(MKCONFIG) -a IceCube ppc mpc5xxx icecube
v38b_config: unconfig
- @./mkconfig -a V38B ppc mpc5xxx v38b
+ @./mkconfig -a v38b ppc mpc5xxx v38b
inka4x0_config: unconfig
@$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0
diff --git a/board/bc3450/bc3450.c b/board/bc3450/bc3450.c
index 0d86518..05bb723 100644
--- a/board/bc3450/bc3450.c
+++ b/board/bc3450/bc3450.c
@@ -295,7 +295,6 @@ void pci_init_board(void)
#endif
#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
-#define GPIO_PSC1_4 0x01000000UL
void init_ide_reset (void)
{
@@ -311,9 +310,9 @@ void ide_set_reset (int idereset)
debug ("ide_reset(%d)\n", idereset);
if (idereset) {
- *(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4;
+ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4;
} else {
- *(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_PSC1_4;
+ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4;
}
}
#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
diff --git a/board/emk/top5200/top5200.c b/board/emk/top5200/top5200.c
index 4508438..12acc57 100644
--- a/board/emk/top5200/top5200.c
+++ b/board/emk/top5200/top5200.c
@@ -186,8 +186,6 @@ void pci_init_board(void)
*****************************************************************************/
#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
-#define GPIO_PSC1_4 0x01000000UL
-
void init_ide_reset (void)
{
debug ("init_ide_reset\n");
@@ -202,9 +200,9 @@ void ide_set_reset (int idereset)
debug ("ide_reset(%d)\n", idereset);
if (idereset) {
- *(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4;
+ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4;
} else {
- *(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_PSC1_4;
+ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4;
}
}
#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
diff --git a/board/esd/cpci5200/cpci5200.c b/board/esd/cpci5200/cpci5200.c
index 6c98f13..f14331b 100644
--- a/board/esd/cpci5200/cpci5200.c
+++ b/board/esd/cpci5200/cpci5200.c
@@ -199,8 +199,6 @@ void pci_init_board(void
#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
-#define GPIO_PSC1_4 0x01000000UL
-
void init_ide_reset(void)
{
debug("init_ide_reset\n");
@@ -215,9 +213,9 @@ void ide_set_reset(int idereset)
debug("ide_reset(%d)\n", idereset);
if (idereset) {
- *(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4;
+ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4;
} else {
- *(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_PSC1_4;
+ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4;
}
}
#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
@@ -242,7 +240,7 @@ void init_ata_reset(void)
debug("init_ata_reset\n");
/* Configure GPIO_WU6 as GPIO output for ATA reset */
- *(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_WU6;
+ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_WU6;
*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_WU6;
*(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_WU6;
__asm__ volatile ("sync");
diff --git a/board/esd/pf5200/pf5200.c b/board/esd/pf5200/pf5200.c
index 2b47012..1f30d45 100644
--- a/board/esd/pf5200/pf5200.c
+++ b/board/esd/pf5200/pf5200.c
@@ -199,8 +199,6 @@ void pci_init_board(void
#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
-#define GPIO_PSC1_4 0x01000000UL
-
void init_ide_reset(void)
{
debug("init_ide_reset\n");
@@ -215,9 +213,9 @@ void ide_set_reset(int idereset)
debug("ide_reset(%d)\n", idereset);
if (idereset) {
- *(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4;
+ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4;
} else {
- *(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_PSC1_4;
+ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4;
}
}
#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
@@ -242,7 +240,7 @@ void init_power_switch(void)
debug("init_power_switch\n");
/* Configure GPIO_WU6 as GPIO output for ATA reset */
- *(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_WU6;
+ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_WU6;
*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_WU6;
*(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_WU6;
__asm__ volatile ("sync");
@@ -272,10 +270,10 @@ void power_set_reset(int power)
debug("ide_set_reset(%d)\n", power);
if (power) {
- *(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_WU6;
+ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_WU6;
*(vu_long *) MPC5XXX_INTERRUPT_GPIO_DATA_OUTPUT &= ~GPIO_USB9;
} else {
- *(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_WU6;
+ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_WU6;
if ((*(vu_long *) MPC5XXX_INTERRUPT_GPIO_STATUS & GPIO_USB9S) ==
0) {
*(vu_long *) MPC5XXX_SIMPLEIO_GPIO_DATA_OUTPUT |=
diff --git a/board/icecube/icecube.c b/board/icecube/icecube.c
index 4f056b2..f958b32 100644
--- a/board/icecube/icecube.c
+++ b/board/icecube/icecube.c
@@ -308,8 +308,6 @@ void pci_init_board(void)
#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
-#define GPIO_PSC1_4 0x01000000UL
-
void init_ide_reset (void)
{
debug ("init_ide_reset\n");
@@ -318,7 +316,7 @@ void init_ide_reset (void)
*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4;
*(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC1_4;
/* Deassert reset */
- *(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_PSC1_4;
+ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4;
}
void ide_set_reset (int idereset)
@@ -326,11 +324,11 @@ void ide_set_reset (int idereset)
debug ("ide_reset(%d)\n", idereset);
if (idereset) {
- *(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4;
+ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4;
/* Make a delay. MPC5200 spec says 25 usec min */
udelay(500000);
} else {
- *(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_PSC1_4;
+ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4;
}
}
#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
diff --git a/board/inka4x0/inka4x0.c b/board/inka4x0/inka4x0.c
index 29878f9..d670cc3 100644
--- a/board/inka4x0/inka4x0.c
+++ b/board/inka4x0/inka4x0.c
@@ -173,9 +173,6 @@ void flash_preinit(void)
*(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
}
-#define GPIO_WKUP_7 0x80000000UL
-#define GPIO_PSC3_9 0x04000000UL
-
int misc_init_f (void)
{
uchar tmp[10];
@@ -218,13 +215,13 @@ int misc_init_f (void)
*(vu_long *)MPC5XXX_WU_GPIO_DIR |= 0xc4000000;
/* Set LR mirror bit because it is low-active */
- *(vu_long *)MPC5XXX_WU_GPIO_DATA |= GPIO_WKUP_7;
+ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_WKUP_7;
/*
* Reset Coral-P graphics controller
*/
*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC3_9;
*(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC3_9;
- *(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_PSC3_9;
+ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC3_9;
return 0;
}
@@ -241,8 +238,6 @@ void pci_init_board(void)
#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
-#define GPIO_PSC1_4 0x01000000UL
-
void init_ide_reset (void)
{
debug ("init_ide_reset\n");
@@ -251,7 +246,7 @@ void init_ide_reset (void)
*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4;
*(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC1_4;
/* Deassert reset */
- *(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_PSC1_4;
+ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4;
}
void ide_set_reset (int idereset)
@@ -259,11 +254,11 @@ void ide_set_reset (int idereset)
debug ("ide_reset(%d)\n", idereset);
if (idereset) {
- *(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4;
+ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4;
/* Make a delay. MPC5200 spec says 25 usec min */
udelay(500000);
} else {
- *(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_PSC1_4;
+ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4;
}
}
#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
diff --git a/board/tqm5200/tqm5200.c b/board/tqm5200/tqm5200.c
index 1d81dce..cb57a5e 100644
--- a/board/tqm5200/tqm5200.c
+++ b/board/tqm5200/tqm5200.c
@@ -341,9 +341,7 @@ void pci_init_board(void)
#define SM501_GPIO_DATA_DIR_HIGH 0x0001000CUL
#define SM501_GPIO_DATA_HIGH 0x00010004UL
#define SM501_GPIO_51 0x00080000UL
-#else
-#define GPIO_PSC1_4 0x01000000UL
-#endif
+#endif /* CONFIG MINIFAP */
void init_ide_reset (void)
{
@@ -381,9 +379,9 @@ void ide_set_reset (int idereset)
}
#else
if (idereset) {
- *(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4;
+ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4;
} else {
- *(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_PSC1_4;
+ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4;
}
#endif
}
diff --git a/board/v38b/ethaddr.c b/board/v38b/ethaddr.c
index aaa629e..4e2494e 100644
--- a/board/v38b/ethaddr.c
+++ b/board/v38b/ethaddr.c
@@ -1,5 +1,4 @@
/*
- *
* (C) Copyright 2006
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
@@ -25,48 +24,13 @@
#include <common.h>
#include <mpc5xxx.h>
-#define GPIO_ENABLE (MPC5XXX_WU_GPIO)
-
-/* Open Drain Emulation Register */
-#define GPIO_ODR (MPC5XXX_WU_GPIO + 0x04)
-
-/* Data Direction Register */
-#define GPIO_DDR (MPC5XXX_WU_GPIO + 0x08)
-
-/* Data Value Out Register */
-#define GPIO_DVOR (MPC5XXX_WU_GPIO + 0x0C)
-
-/* Interrupt Enable Register */
-#define GPIO_IER (MPC5XXX_WU_GPIO + 0x10)
-
-/* Individual Interrupt Enable Register */
-#define GPIO_IIER (MPC5XXX_WU_GPIO + 0x14)
-
-/* Interrupt Type Register */
-#define GPIO_ITR (MPC5XXX_WU_GPIO + 0x18)
-
-/* Master Enable Register */
-#define GPIO_MER (MPC5XXX_WU_GPIO + 0x1C)
-
-/* Data Input Value Register */
-#define GPIO_DIVR (MPC5XXX_WU_GPIO + 0x20)
-
-/* Status Register */
-#define GPIO_SR (MPC5XXX_WU_GPIO + 0x24)
-
-#define PSC6_0 0x10000000
-#define WKUP_7 0x80000000
-
-/* For NS4 A/B board define WKUP_7, for V38B board PSC_6 */
-#define GPIO_PIN PSC6_0
+/* For the V38B board the pin is GPIO_PSC_6 */
+#define GPIO_PIN GPIO_PSC6_0
#define NO_ERROR 0
#define ERR_NO_NUMBER 1
#define ERR_BAD_NUMBER 2
-typedef volatile unsigned long GPIO_REG;
-typedef GPIO_REG *GPIO_REG_PTR;
-
static int is_high(void);
static int check_device(void);
static void io_out(int value);
@@ -79,33 +43,34 @@ static void write_byte(unsigned char command);
void read_2501_memory(unsigned char *psernum, unsigned char *perr);
void board_get_enetaddr(uchar *enetaddr);
+
static int is_high()
{
- return (* ((vu_long *) GPIO_DIVR) & GPIO_PIN);
+ return (*((vu_long *) MPC5XXX_WU_GPIO_DATA_I) & GPIO_PIN);
}
static void io_out(int value)
{
if (value)
- *((vu_long *) GPIO_DVOR) |= GPIO_PIN;
+ *((vu_long *) MPC5XXX_WU_GPIO_DATA_O) |= GPIO_PIN;
else
- *((vu_long *) GPIO_DVOR) &= ~GPIO_PIN;
+ *((vu_long *) MPC5XXX_WU_GPIO_DATA_O) &= ~GPIO_PIN;
}
static void io_input()
{
- *((vu_long *) GPIO_DDR) &= ~GPIO_PIN;
+ *((vu_long *) MPC5XXX_WU_GPIO_DIR) &= ~GPIO_PIN;
udelay(3); /* allow input to settle */
}
static void io_output()
{
- *((vu_long *) GPIO_DDR) |= GPIO_PIN;
+ *((vu_long *) MPC5XXX_WU_GPIO_DIR) |= GPIO_PIN;
}
static void init_gpio()
{
- *((vu_long *) GPIO_ENABLE) |= GPIO_PIN; /* Enable appropriate pin */
+ *((vu_long *) MPC5XXX_WU_GPIO_ENABLE) |= GPIO_PIN; /* Enable appropriate pin */
}
void read_2501_memory(unsigned char *psernum, unsigned char *perr)
@@ -117,8 +82,8 @@ void read_2501_memory(unsigned char *psernum, unsigned char *perr)
*perr = 0;
crcval = 0;
- for (i=0; i<NBYTES; i++)
-
+ for (i = 0; i < NBYTES; i++)
+ buf[i] = 0;
if (!check_device())
*perr = ERR_NO_NUMBER;
@@ -130,10 +95,10 @@ void read_2501_memory(unsigned char *psernum, unsigned char *perr)
write_byte(0x00);
read_byte(&crcval); /* Read CRC of address and command */
- for (i=0; i<NBYTES; i++)
- read_byte( &buf[i] );
+ for (i = 0; i < NBYTES; i++)
+ read_byte(&buf[i]);
}
- if (strncmp((const char*) &buf[11], "MAREL IEEE 802.3", 16)) {
+ if (strncmp((const char *) &buf[11], "MAREL IEEE 802.3", 16)) {
*perr = ERR_BAD_NUMBER;
psernum[0] = 0x00;
psernum[1] = 0xE0;
@@ -141,8 +106,7 @@ void read_2501_memory(unsigned char *psernum, unsigned char *perr)
psernum[3] = 0xFF;
psernum[4] = 0xFF;
psernum[5] = 0xFF;
- }
- else {
+ } else {
psernum[0] = 0x00;
psernum[1] = 0xE0;
psernum[2] = 0xEE;
@@ -173,27 +137,23 @@ static void write_byte(unsigned char command)
{
char i;
- for (i=0; i<8; i++) {
+ for (i = 0; i < 8; i++) {
/* 1 us to 15 us low pulse starts bit slot */
/* Start with high pulse for 3 us */
io_input();
-
udelay(3);
io_out(0);
io_output();
-
udelay(3);
if (command & 0x01) {
/* 60 us high for 1-bit */
io_input();
udelay(60);
- }
- else {
+ } else
/* 60 us low for 0-bit */
udelay(60);
- }
/* Leave pin as input */
io_input();
@@ -201,11 +161,11 @@ static void write_byte(unsigned char command)
}
}
-static void read_byte(unsigned char *data)
+static void read_byte(unsigned char *data)
{
unsigned char i, rdat = 0;
- for (i=0; i<8; i++) {
+ for (i = 0; i < 8; i++) {
/* read one bit from one-wire device */
/* 1 - 15 us low starts bit slot */
@@ -233,22 +193,21 @@ static void read_byte(unsigned char *data)
void board_get_enetaddr(uchar *enetaddr)
{
- unsigned char sn[6], err=NO_ERROR;
+ unsigned char sn[6], err = NO_ERROR;
init_gpio();
read_2501_memory(sn, &err);
if (err == NO_ERROR) {
- sprintf(enetaddr, "%02x:%02x:%02x:%02x:%02x:%02x",
+ sprintf((char *)enetaddr, "%02x:%02x:%02x:%02x:%02x:%02x",
sn[0], sn[1], sn[2], sn[3], sn[4], sn[5]);
printf("MAC address: %s\n", enetaddr);
- setenv("ethaddr", enetaddr);
- }
- else {
- sprintf(enetaddr, "00:01:02:03:04:05");
+ setenv("ethaddr", (char *)enetaddr);
+ } else {
+ sprintf((char *)enetaddr, "00:01:02:03:04:05");
printf("Error reading MAC address.\n");
printf("Setting default to %s\n", enetaddr);
- setenv("ethaddr", enetaddr);
+ setenv("ethaddr", (char *)enetaddr);
}
}
diff --git a/board/v38b/u-boot.lds b/board/v38b/u-boot.lds
index 6ec5256..4fdea6b 100644
--- a/board/v38b/u-boot.lds
+++ b/board/v38b/u-boot.lds
@@ -61,6 +61,7 @@ SECTIONS
*(.rodata)
*(.rodata1)
*(.rodata.str1.4)
+ *(.eh_frame)
}
.fini : { *(.fini) } =0
.ctors : { *(.ctors) }
@@ -93,11 +94,13 @@ SECTIONS
_edata = .;
PROVIDE (edata = .);
+ . = .;
__u_boot_cmd_start = .;
.u_boot_cmd : { *(.u_boot_cmd) }
__u_boot_cmd_end = .;
+ . = .;
__start___ex_table = .;
__ex_table : { *(__ex_table) }
__stop___ex_table = .;
diff --git a/board/v38b/v38b.c b/board/v38b/v38b.c
index 99fe7db..dede996 100644
--- a/board/v38b/v38b.c
+++ b/board/v38b/v38b.c
@@ -28,43 +28,44 @@
#include <mpc5xxx.h>
#include <asm/processor.h>
+
#ifndef CFG_RAMBOOT
static void sdram_start(int hi_addr)
{
long hi_addr_bit = hi_addr ? 0x01000000 : 0;
/* unlock mode register */
- *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit;
+ *(vu_long *) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit;
__asm__ volatile ("sync");
/* precharge all banks */
- *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
+ *(vu_long *) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
__asm__ volatile ("sync");
#if SDRAM_DDR
/* set mode register: extended mode */
- *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_EMODE;
+ *(vu_long *) MPC5XXX_SDRAM_MODE = SDRAM_EMODE;
__asm__ volatile ("sync");
/* set mode register: reset DLL */
- *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000;
+ *(vu_long *) MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000;
__asm__ volatile ("sync");
#endif /* SDRAM_DDR */
/* precharge all banks */
- *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
+ *(vu_long *) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
__asm__ volatile ("sync");
/* auto refresh */
- *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit;
+ *(vu_long *) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit;
__asm__ volatile ("sync");
/* set mode register */
- *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE;
+ *(vu_long *) MPC5XXX_SDRAM_MODE = SDRAM_MODE;
__asm__ volatile ("sync");
/* normal operation */
- *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
+ *(vu_long *) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
__asm__ volatile ("sync");
}
#endif /* !CFG_RAMBOOT */
@@ -80,18 +81,18 @@ long int initdram(int board_type)
ulong test1, test2;
/* setup SDRAM chip selects */
- *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e; /* 2G at 0x0 */
- *(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000; /* disabled */
+ *(vu_long *) MPC5XXX_SDRAM_CS0CFG = 0x0000001e; /* 2G at 0x0 */
+ *(vu_long *) MPC5XXX_SDRAM_CS1CFG = 0x80000000; /* disabled */
__asm__ volatile ("sync");
/* setup config registers */
- *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
- *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
+ *(vu_long *) MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
+ *(vu_long *) MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
__asm__ volatile ("sync");
#if SDRAM_DDR
/* set tap delay */
- *(vu_long *)MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY;
+ *(vu_long *) MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY;
__asm__ volatile ("sync");
#endif /* SDRAM_DDR */
@@ -112,20 +113,20 @@ long int initdram(int board_type)
/* set SDRAM CS0 size according to the amount of RAM found */
if (dramsize > 0)
- *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + __builtin_ffs(dramsize >> 20) - 1;
+ *(vu_long *) MPC5XXX_SDRAM_CS0CFG = 0x13 + __builtin_ffs(dramsize >> 20) - 1;
else
- *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
+ *(vu_long *) MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
/* let SDRAM CS1 start right after CS0 */
- *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;/* 2G */
+ *(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;/* 2G */
/* find RAM size using SDRAM CS1 only */
if (!dramsize)
sdram_start(0);
- test2 = test1 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
+ test2 = test1 = get_ram_size((long *) (CFG_SDRAM_BASE + dramsize), 0x80000000);
if (!dramsize) {
sdram_start(1);
- test2 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
+ test2 = get_ram_size((long *) (CFG_SDRAM_BASE + dramsize), 0x80000000);
}
if (test1 > test2) {
sdram_start(0);
@@ -139,22 +140,22 @@ long int initdram(int board_type)
/* set SDRAM CS1 size according to the amount of RAM found */
if (dramsize2 > 0)
- *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize
+ *(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize
| (0x13 + __builtin_ffs(dramsize2 >> 20) - 1);
else
- *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
+ *(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
#else /* CFG_RAMBOOT */
/* retrieve size of memory connected to SDRAM CS0 */
- dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
+ dramsize = *(vu_long *) MPC5XXX_SDRAM_CS0CFG & 0xFF;
if (dramsize >= 0x13)
dramsize = (1 << (dramsize - 0x13)) << 20;
else
dramsize = 0;
/* retrieve size of memory connected to SDRAM CS1 */
- dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF;
+ dramsize2 = *(vu_long *) MPC5XXX_SDRAM_CS1CFG & 0xFF;
if (dramsize2 >= 0x13)
dramsize2 = (1 << (dramsize2 - 0x13)) << 20;
else
@@ -176,7 +177,7 @@ long int initdram(int board_type)
if ((SVR_MJREV(svr) >= 2) &&
(PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) {
- *(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04;
+ *(vu_long *) MPC5XXX_SDRAM_SDELAY = 0x04;
__asm__ volatile ("sync");
}
@@ -194,27 +195,42 @@ int checkboard (void)
int board_early_init_r(void)
{
/*
- * Now, when we are in RAM, enable flash write access for detection process.
- * Note that CS_BOOT cannot be cleared when executing in flash.
+ * Now, when we are in RAM, enable flash write access for the
+ * detection process. Note that CS_BOOT cannot be cleared when
+ * executing in flash.
+ */
+ *(vu_long *) MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
+
+#ifdef CONFIG_HW_WATCHDOG
+ /*
+ * Enable and configure the direction (output) of PSC3_9 - watchdog
+ * reset input. Refer to 7.3.2.2.[1,3,4] of the MPC5200B User's
+ * Manual.
+ */
+ *(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC3_9;
+ *(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC3_9;
+#endif /* CONFIG_HW_WATCHDOG */
+
+ /*
+ * Enable GPIO_WKUP_7 to "read the status of the actual power
+ * situation". Default direction is input, so no need to set it
+ * explicitly.
*/
- *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
+ *(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_WKUP_7;
return 0;
}
#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
-
-#define GPIO_PSC1_4 0x01000000UL
-
void init_ide_reset(void)
{
debug("init_ide_reset\n");
/* Configure PSC1_4 as GPIO output for ATA reset */
*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4;
- *(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC1_4;
+ *(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC1_4;
/* Deassert reset */
- *(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_PSC1_4;
+ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4;
}
@@ -223,30 +239,22 @@ void ide_set_reset(int idereset)
debug("ide_reset(%d)\n", idereset);
if (idereset) {
- *(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4;
+ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4;
/* Make a delay. MPC5200 spec says 25 usec min */
udelay(500000);
} else
- *(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_PSC1_4;
+ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4;
}
#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
-void led_d4_on(void)
-{
- /* TIMER7 as GPIO output low */
- *(vu_long *) (MPC5XXX_GPT + 0x70) |= 0x24;
-}
-
-
-void led_d4_off(void)
-{
- /* TIMER7 as GPIO output high */
- *(vu_long *) (MPC5XXX_GPT + 0x70) |= 0x34;
-}
-
-
+#ifdef CONFIG_HW_WATCHDOG
void hw_watchdog_reset(void)
{
-/* TODO fill this in */
+ /*
+ * MarelV38B has a TPS3705 watchdog. Spec says that to kick the dog
+ * we need a positive or negative transition on WDI i.e., our PSC3_9.
+ */
+ *(vu_long *) MPC5XXX_WU_GPIO_DATA_O ^= GPIO_PSC3_9;
}
+#endif /* CONFIG_HW_WATCHDOG */
diff --git a/include/configs/V38B.h b/include/configs/v38b.h
index 8eea504..cf2d031 100644
--- a/include/configs/V38B.h
+++ b/include/configs/v38b.h
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2003-2004 Wolfgang Denk, DENX Software Engineering,
+ * (C) Copyright 2003-2006 Wolfgang Denk, DENX Software Engineering,
* wd@denx.de.
*
* See file CREDITS for list of people who contributed to this project.
@@ -11,7 +11,7 @@
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
@@ -22,51 +22,41 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#if 0
-#define DEBUG 0xFFF
-#endif
-
-#if 0
-#define DEBUG 0x01
-#endif
-
/*
* High Level Configuration Options
* (easy to change)
-*/
+ */
+#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
+#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */
+#define CONFIG_V38B 1 /* ...on V38B board */
+#define CFG_MPC5XXX_CLKIN 33000000 /* ...running at 33.000000MHz */
-#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
-#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */
-#define CONFIG_V38B 1 /* ... on V38B board */
-#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */
+#define CONFIG_RTC_PCF8563 1 /* has PCF8563 RTC */
+#define CONFIG_MPC5200_DDR 1 /* has DDR SDRAM */
-#define CONFIG_RTC_PCF8563 1 /* has PCF8563 RTC */
-#define CONFIG_MPC5200_DDR 1 /* has DDR SDRAM */
-#define CONFIG_HW_WATCHDOG 1 /* has watchdog */
+#define CONFIG_HW_WATCHDOG 1 /* has watchdog */
#define CONFIG_NETCONSOLE 1
-#define CONFIG_BOARD_EARLY_INIT_R 1 /* make flash read/write */
-
-#define CFG_XLB_PIPELINING 1 /* gives better performance */
+#define CONFIG_BOARD_EARLY_INIT_R 1 /* do board-specific init */
+#define CFG_XLB_PIPELINING 1 /* gives better performance */
-#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM 0x02 /* Software reboot */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
/*
* Serial console configuration
*/
-#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
-#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
+#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
+#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
-
/*
* DDR
*/
@@ -79,7 +69,6 @@
#define SDRAM_CONFIG2 0x47770000
#define SDRAM_TAPDELAY 0x10000000
-
/*
* PCI - no suport
*/
@@ -96,13 +85,13 @@
*/
#define CONFIG_USB_OHCI
#define CONFIG_USB_STORAGE
-
-#define CONFIG_TIMESTAMP /* Print image info with timestamp */
+#define CONFIG_USB_CLOCK 0x0001BBBB
+#define CONFIG_USB_CONFIG 0x00001000
/*
* Supported commands
*/
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
CFG_CMD_FAT | \
CFG_CMD_I2C | \
CFG_CMD_IDE | \
@@ -112,53 +101,63 @@
CFG_CMD_IRQ | \
CFG_CMD_JFFS2 | \
CFG_CMD_MII | \
- CFG_CMD_SDRAMi | \
+ CFG_CMD_SDRAMi | \
CFG_CMD_DATE | \
CFG_CMD_USB | \
CFG_CMD_FAT)
+#define CONFIG_TIMESTAMP /* Print image info with timestamp */
+
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
/*
* Boot low with 16 MB Flash
*/
-# define CFG_LOWBOOT 1
-# define CFG_LOWBOOT16 1
+#define CFG_LOWBOOT 1
+#define CFG_LOWBOOT16 1
/*
* Autobooting
*/
#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
-#define CONFIG_PREBOOT "echo;" \
+#define CONFIG_PREBOOT "echo;" \
"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
"echo"
-#undef CONFIG_BOOTARGS
+#undef CONFIG_BOOTARGS
#define CONFIG_EXTRA_ENV_SETTINGS \
+ "bootcmd=run net_nfs\0" \
+ "bootdelay=3\0" \
+ "baudrate=115200\0" \
+ "preboot=echo;echo Type \"run flash_nfs\" to mount root " \
+ "filesystem over NFS; echo\0" \
"netdev=eth0\0" \
- "devno=5\0" \
- "hostname=V38B_$(devno)\0" \
- "ipaddr=10.100.99.$(devno)\0" \
- "netmask=255.255.0.0\0" \
- "serverip=10.100.10.90\0" \
- "gatewayip=10.100.254.254\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
- "rootpath=/opt/eldk/ppc_6xx\0" \
- "bootfile=mpc5200/uImage\0" \
- "bootcmd=run net_nfs\0" \
"addip=setenv bootargs $(bootargs) " \
"ip=$(ipaddr):$(serverip):$(gatewayip):" \
"$(netmask):$(hostname):$(netdev):off panic=1\0" \
"flash_nfs=run nfsargs addip;bootm $(kernel_addr)\0" \
"flash_self=run ramargs addip;bootm $(kernel_addr) " \
"$(ramdisk_addr)\0" \
- "net_nfs=tftp 200000 $(bootfile);run nfsargs " \
- "addip;bootm\0" \
+ "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=$(serverip):$(rootpath)\0" \
+ "hostname=v38b\0" \
+ "ethact=FEC ETHERNET\0" \
+ "rootpath=/opt/eldk-3.1.1/ppc_6xx\0" \
+ "update=prot off ff000000 ff03ffff; era ff000000 ff03ffff; " \
+ "cp.b 200000 ff000000 $(filesize);" \
+ "prot on ff000000 ff03ffff\0" \
+ "load=tftp 200000 $(u-boot)\0" \
+ "netmask=255.255.0.0\0" \
+ "ipaddr=192.168.160.18\0" \
+ "serverip=192.168.1.1\0" \
+ "ethaddr=00:e0:ee:00:05:2e\0" \
+ "bootfile=/tftpboot/v38b/uImage\0" \
+ "u-boot=/tftpboot/v38b/u-boot.bin\0" \
""
#define CONFIG_BOOTCOMMAND "run net_nfs"
@@ -169,13 +168,13 @@
*/
#undef CFG_IPBSPEED_133 /* define for 133MHz speed */
#endif
+
/*
* I2C configuration
*/
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
#define CFG_I2C_MODULE 2 /* Select I2C module #1 or #2 */
-
-#define CFG_I2C_SPEED 100000 /* 100 kHz */
+#define CFG_I2C_SPEED 100000 /* 100 kHz */
#define CFG_I2C_SLAVE 0x7F
/*
@@ -196,7 +195,7 @@
*/
#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
-#define CFG_FLASH_CFI_AMD_RESET 1
+#define CFG_FLASH_CFI_AMD_RESET 1
#define CFG_FLASH_BASE 0xFF000000
#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */
#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
@@ -224,19 +223,18 @@
#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM
#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used area in DPRAM */
-
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
-#define CFG_MONITOR_BASE TEXT_BASE
+#define CFG_MONITOR_BASE TEXT_BASE
#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
# define CFG_RAMBOOT 1
#endif
-#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
-#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
-#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256kB for Monitor */
+#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128kB for malloc() */
+#define CFG_BOOTMAPSZ (8 << 20) /* Linux initial memory map */
/*
* Ethernet configuration
@@ -253,19 +251,19 @@
/*
* Miscellaneous configurable options
*/
-#define CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
-#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
+#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
#define CFG_LOAD_ADDR 0x100000 /* default load address */
@@ -274,14 +272,8 @@
/*
* Various low-level settings
*/
-#if defined(CONFIG_MPC5200)
#define CFG_HID0_INIT HID0_ICE | HID0_ICFI
#define CFG_HID0_FINAL HID0_ICE
-#else
-#define CFG_HID0_INIT 0
-#define CFG_HID0_FINAL 0
-#endif
-
#define CFG_BOOTCS_START CFG_FLASH_BASE
#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE
@@ -294,55 +286,39 @@
#define CFG_RESET_ADDRESS 0xff000000
-/*-----------------------------------------------------------------------
- * USB stuff
- *-----------------------------------------------------------------------
- */
-#define CONFIG_USB_CLOCK 0x0001BBBB
-#define CONFIG_USB_CONFIG 0x00001000
-
-
-/*-----------------------------------------------------------------------
- * IDE/ATA stuff Supports IDE harddisk
- *-----------------------------------------------------------------------
+/*
+ * IDE/ATA (supports IDE harddisk)
*/
+#undef CONFIG_IDE_8xx_PCCARD /* Don't use IDE with PC Card Adapter */
+#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
+#undef CONFIG_IDE_LED /* LED for ide not supported */
-#undef CONFIG_IDE_8xx_PCCARD /* Don't use IDE with PC Card Adapter */
-
-#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
-#undef CONFIG_IDE_LED /* LED for ide not supported */
-
-#define CONFIG_IDE_RESET /* reset for ide supported */
+#define CONFIG_IDE_RESET /* reset for ide supported */
#define CONFIG_IDE_PREINIT
-#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
-#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
+#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
+#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
#define CFG_ATA_IDE0_OFFSET 0x0000
#define CFG_ATA_BASE_ADDR MPC5XXX_ATA
-/* Offset for data I/O */
-#define CFG_ATA_DATA_OFFSET (0x0060)
-
-/* Offset for normal register accesses */
-#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET)
+#define CFG_ATA_DATA_OFFSET (0x0060) /* data I/O offset */
-/* Offset for alternate registers */
-#define CFG_ATA_ALT_OFFSET (0x005C)
+#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET) /* normal register accesses offset */
-/* Interval between registers */
-#define CFG_ATA_STRIDE 4
+#define CFG_ATA_ALT_OFFSET (0x005C) /* alternate registers offset */
-/* Status LED */
+#define CFG_ATA_STRIDE 4 /* Interval between registers */
-#define CONFIG_STATUS_LED /* Status LED enabled */
-#define CONFIG_BOARD_SPECIFIC_LED /* version has board specific leds */
-
-#define CFG_LED_BASE (0xf0000600 + 0x70) /* Timer 7 GPIO */
+/*
+ * Status LED
+ */
+#define CONFIG_STATUS_LED /* Status LED enabled */
+#define CONFIG_BOARD_SPECIFIC_LED /* version has board specific leds */
+#define CFG_LED_BASE MPC5XXX_GPT7_ENABLE /* Timer 7 GPIO */
#ifndef __ASSEMBLY__
-/* LEDs */
typedef unsigned int led_id_t;
#define __led_toggle(_msk) \
@@ -359,10 +335,9 @@ typedef unsigned int led_id_t;
} while(0)
#define __led_init(_msk, st) \
- { \
+ do { \
*((volatile long *) (CFG_LED_BASE)) |= 0x34; \
- }
-
-#endif
+ } while(0)
+#endif /* __ASSEMBLY__ */
#endif /* __CONFIG_H */
diff --git a/include/mpc5xxx.h b/include/mpc5xxx.h
index 1d20d1d..089aa13 100644
--- a/include/mpc5xxx.h
+++ b/include/mpc5xxx.h
@@ -188,7 +188,14 @@
#define MPC5XXX_WU_GPIO_ENABLE (MPC5XXX_WU_GPIO + 0x0000)
#define MPC5XXX_WU_GPIO_ODE (MPC5XXX_WU_GPIO + 0x0004)
#define MPC5XXX_WU_GPIO_DIR (MPC5XXX_WU_GPIO + 0x0008)
-#define MPC5XXX_WU_GPIO_DATA (MPC5XXX_WU_GPIO + 0x000c)
+#define MPC5XXX_WU_GPIO_DATA_O (MPC5XXX_WU_GPIO + 0x000c)
+#define MPC5XXX_WU_GPIO_DATA_I (MPC5XXX_WU_GPIO + 0x0020)
+
+/* GPIO pins */
+#define GPIO_WKUP_7 0x80000000UL
+#define GPIO_PSC6_0 0x10000000UL
+#define GPIO_PSC3_9 0x04000000UL
+#define GPIO_PSC1_4 0x01000000UL
/* PCI registers */
#define MPC5XXX_PCI_CMD (MPC5XXX_PCI + 0x04)