diff options
685 files changed, 21146 insertions, 10399 deletions
@@ -16,6 +16,7 @@ *.patch *.bin *.cfgtmp +*.dts.tmp # Build tree /build-* diff --git a/Licenses/README b/Licenses/README index b1a59cc..4196125 100644 --- a/Licenses/README +++ b/Licenses/README @@ -43,10 +43,14 @@ at [2]. [1] http://spdx.org/ [2] http://spdx.org/licenses/ -Full name SPDX Identifier OSI Approved File name URI +Full name SPDX Identifier OSI Approved File name URI ======================================================================================================================================= -GNU General Public License v2.0 only GPL-2.0 Y gpl-2.0.txt http://www.gnu.org/licenses/gpl-2.0.txt -GNU General Public License v2.0 or later GPL-2.0+ Y gpl-2.0.txt http://www.gnu.org/licenses/gpl-2.0.txt -GNU Library General Public License v2 or later LGPL-2.0+ Y lgpl-2.0.txt http://www.gnu.org/licenses/old-licenses/lgpl-2.0.txt -GNU Lesser General Public License v2.1 or later LGPL-2.1+ Y lgpl-2.1.txt http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt -eCos license version 2.0 eCos-2.0 eCos-2.0.txt http://www.gnu.org/licenses/ecos-license.html +GNU General Public License v2.0 only GPL-2.0 Y gpl-2.0.txt http://www.gnu.org/licenses/gpl-2.0.txt +GNU General Public License v2.0 or later GPL-2.0+ Y gpl-2.0.txt http://www.gnu.org/licenses/gpl-2.0.txt +GNU Library General Public License v2 or later LGPL-2.0+ Y lgpl-2.0.txt http://www.gnu.org/licenses/old-licenses/lgpl-2.0.txt +GNU Lesser General Public License v2.1 or later LGPL-2.1+ Y lgpl-2.1.txt http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt +eCos license version 2.0 eCos-2.0 eCos-2.0.txt http://www.gnu.org/licenses/ecos-license.html +BSD 2-Clause License BSD-2-Clause Y bsd-2-clause.txt http://spdx.org/licenses/BSD-2-Clause +BSD 3-clause "New" or "Revised" License BSD-3-Clause Y bsd-3-clause.txt http://spdx.org/licenses/BSD-3-Clause#licenseText +IBM PIBS (PowerPC Initialization and ibm-pibs ibm-pibs.txt + Boot Software) license diff --git a/Licenses/bsd-2-clause.txt b/Licenses/bsd-2-clause.txt new file mode 100644 index 0000000..af69764 --- /dev/null +++ b/Licenses/bsd-2-clause.txt @@ -0,0 +1,25 @@ +Redistribution and use in source and binary forms, with or +without modification, are permitted provided that the following +conditions are met: + +1. Redistributions of source code must retain the above + copyright notice, this list of conditions and the following + disclaimer. +2. Redistributions in binary form must reproduce the above + copyright notice, this list of conditions and the following + disclaimer in the documentation and/or other materials + provided with the distribution. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND +CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, +INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR +CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT +NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, +EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. diff --git a/Licenses/bsd-3-clause.txt b/Licenses/bsd-3-clause.txt new file mode 100644 index 0000000..aac5e2a --- /dev/null +++ b/Licenses/bsd-3-clause.txt @@ -0,0 +1,24 @@ +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions +are met: +1. Redistributions of source code must retain the above copyright + notice, this list of conditions, and the following disclaimer, + without modification. +2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. +3. The names of the above-listed copyright holders may not be used + to endorse or promote products derived from this software without + specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS +IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, +THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR +CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, +EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF +LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING +NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. diff --git a/Licenses/ibm-pibs.txt b/Licenses/ibm-pibs.txt new file mode 100644 index 0000000..4cd7523 --- /dev/null +++ b/Licenses/ibm-pibs.txt @@ -0,0 +1,17 @@ +This source code has been made available to you by IBM on an AS-IS +basis. Anyone receiving this source is licensed under IBM +copyrights to use it in any way he or she deems fit, including +copying it, modifying it, compiling it, and redistributing it either +with or without modifications. No license under IBM patents or +patent applications is to be implied by the copyright license. + +Any user of this software should understand that IBM cannot provide +technical support for this software and will not be responsible for +any consequences resulting from the use of this software. + +Any person who transfers this source code or any derivative work +must include the IBM copyright notice, this paragraph, and the +preceding two paragraphs in the transferred software. + +COPYRIGHT I B M CORPORATION 1995 +LICENSED MATERIAL - PROGRAM PROPERTY OF I B M diff --git a/MAINTAINERS b/MAINTAINERS index 0a900dc..0807727 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -184,7 +184,6 @@ Matthias Fuchs <matthias.fuchs@esd-electronics.com> APC405 PPC405GP AR405 PPC405GP ASH405 PPC405EP - CANBT PPC405CR CPCI2DP PPC405GP CPCI405 PPC405GP CPCI4052 PPC405GP @@ -448,6 +447,7 @@ Heiko Schocher <hs@denx.de> cam_enc_4xx davinci/ARM926EJS charon MPC5200 ids8247 MPC8247 + ipam390 davinci/ARM926EJS jupiter MPC5200 kmsupx5 MPC8321 mucmc52 MPC5200 @@ -472,6 +472,10 @@ Ira W. Snyder <iws@ovro.caltech.edu> P2020COME P2020 +York Sun <yorksun@freescale.com> + + T4240EMU T4240 + Timur Tabi <timur@freescale.com> MPC8349E-mITX MPC8349 @@ -539,6 +543,10 @@ Detlev Zundel <dzu@denx.de> inka4x0 MPC5200 +Po Liu <po.liu@freescale.com> + + C29XPCIE C29X + ------------------------------------------------------------------------- Unknown / orphaned boards: @@ -943,6 +951,10 @@ Lucas Stach <dev@lynxeye.de> colibri_t20_iris Tegra20 (ARM7 & A9 Dual Core) +Antoine Tenart <atenart@adeneo-embedded.com> + + TI816X ARM ARMV7 (TI816x Soc) + Nick Thompson <nick.thompson@gefanuc.com> da830evm ARM926EJS (DA830/OMAP-L137) @@ -1082,6 +1094,11 @@ Sergey Yanovich <ynvich@gmail.com> lp8x4x xscale/pxa +Roger Meier <r.meier@siemens.com> + dxr2 ARM ARMV7 (AM335x SoC) + pxm2 ARM ARMV7 (AM335x SoC) + rut ARM ARMV7 (AM335x SoC) + ------------------------------------------------------------------------- Unknown / orphaned boards: @@ -1358,7 +1375,7 @@ Dimitar Penev <dpn@switchfin.org> # Board CPU # ######################################################################### -Macpaul Lin <macpaul@andestech.com> +Andes <uboot@andestech.com> ADP-AG101 N1213 (AG101 SoC) ADP-AG101P N1213 (AG101P XC5 FPGA) @@ -6,9 +6,9 @@ # VERSION = 2013 -PATCHLEVEL = 07 +PATCHLEVEL = 10 SUBLEVEL = -EXTRAVERSION = +EXTRAVERSION = -rc2 ifneq "$(SUBLEVEL)" "" U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) else @@ -102,10 +102,11 @@ endif # ifneq ($(BUILD_DIR),) OBJTREE := $(if $(BUILD_DIR),$(BUILD_DIR),$(CURDIR)) SPLTREE := $(OBJTREE)/spl +TPLTREE := $(OBJTREE)/tpl SRCTREE := $(CURDIR) TOPDIR := $(SRCTREE) LNDIR := $(OBJTREE) -export TOPDIR SRCTREE OBJTREE SPLTREE +export TOPDIR SRCTREE OBJTREE SPLTREE TPLTREE MKCONFIG := $(SRCTREE)/mkconfig export MKCONFIG @@ -322,7 +323,7 @@ LIBS-y += api/libapi.o LIBS-y += post/libpost.o LIBS-y += test/libtest.o -ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI814X),) +ifneq ($(CONFIG_OMAP_COMMON),) LIBS-y += $(CPUDIR)/omap-common/libomap-common.o endif @@ -397,6 +398,7 @@ ALL-y += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map ALL-$(CONFIG_NAND_U_BOOT) += $(obj)u-boot-nand.bin ALL-$(CONFIG_ONENAND_U_BOOT) += $(obj)u-boot-onenand.bin ALL-$(CONFIG_SPL) += $(obj)spl/u-boot-spl.bin +ALL-$(CONFIG_TPL) += $(obj)tpl/u-boot-tpl.bin ALL-$(CONFIG_OF_SEPARATE) += $(obj)u-boot.dtb $(obj)u-boot-dtb.bin ifneq ($(CONFIG_SPL_TARGET),) ALL-$(CONFIG_SPL) += $(obj)$(subst ",,$(CONFIG_SPL_TARGET)) @@ -413,7 +415,7 @@ endif all: $(ALL-y) $(SUBDIR_EXAMPLES) -$(obj)u-boot.dtb: $(obj)u-boot +$(obj)u-boot.dtb: checkdtc $(obj)u-boot $(MAKE) -C dts binary mv $(obj)dts/dt.dtb $@ @@ -475,13 +477,25 @@ $(obj)u-boot.sha1: $(obj)u-boot.bin $(obj)u-boot.dis: $(obj)u-boot $(OBJDUMP) -d $< > $@ +# $@ is output, $(1) and $(2) are inputs, $(3) is padded intermediate, +# $(4) is pad-to +SPL_PAD_APPEND = \ + $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(4) -I binary -O binary \ + $(1) $(obj)$(3); \ + cat $(obj)$(3) $(2) > $@; \ + rm $(obj)$(3) +ifdef CONFIG_TPL +SPL_PAYLOAD := $(obj)tpl/u-boot-with-tpl.bin +else +SPL_PAYLOAD := $(obj)u-boot.bin +endif -$(obj)u-boot-with-spl.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin - $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SPL_PAD_TO) \ - -I binary -O binary $< $(obj)spl/u-boot-spl-pad.bin - cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $@ - rm $(obj)spl/u-boot-spl-pad.bin +$(obj)u-boot-with-spl.bin: $(obj)spl/u-boot-spl.bin $(SPL_PAYLOAD) + $(call SPL_PAD_APPEND,$<,$(SPL_PAYLOAD),spl/u-boot-spl-pad.bin,$(CONFIG_SPL_PAD_TO)) + +$(obj)tpl/u-boot-with-tpl.bin: $(obj)tpl/u-boot-tpl.bin $(obj)u-boot.bin + $(call SPL_PAD_APPEND,$<,$(obj)u-boot.bin,tpl/u-boot-tpl-pad.bin,$(CONFIG_TPL_PAD_TO)) $(obj)u-boot-with-spl.imx: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin $(MAKE) -C $(SRCTREE)/arch/arm/imx-common \ @@ -607,12 +621,17 @@ $(obj)u-boot-nand.bin: nand_spl $(obj)u-boot.bin $(obj)spl/u-boot-spl.bin: $(SUBDIR_TOOLS) depend $(MAKE) -C spl all +$(obj)tpl/u-boot-tpl.bin: $(SUBDIR_TOOLS) depend + $(MAKE) -C spl all CONFIG_TPL_BUILD=y + updater: $(MAKE) -C tools/updater all # Explicitly make _depend in subdirs containing multiple targets to prevent # parallel sub-makes creating .depend files simultaneously. depend dep: $(TIMESTAMP_FILE) $(VERSION_FILE) \ + $(obj)include/spl-autoconf.mk \ + $(obj)include/tpl-autoconf.mk \ $(obj)include/autoconf.mk \ $(obj)include/generated/generic-asm-offsets.h \ $(obj)include/generated/asm-offsets.h @@ -667,6 +686,12 @@ checkgcc4: false; \ fi +checkdtc: + @if test $(call dtc-version) -lt 0104; then \ + echo '*** Your dtc is too old, please upgrade to dtc 1.4 or newer'; \ + false; \ + fi + # # Auto-generate the autoconf.mk file (which is included by all makefiles) # @@ -688,12 +713,34 @@ $(obj)include/autoconf.mk: $(obj)include/config.h sed -n -f tools/scripts/define2mk.sed > $@.tmp && \ mv $@.tmp $@ +# Auto-generate the spl-autoconf.mk file (which is included by all makefiles for SPL) +$(obj)include/tpl-autoconf.mk: $(obj)include/config.h + @$(XECHO) Generating $@ ; \ + set -e ; \ + : Extract the config macros ; \ + $(CPP) $(CFLAGS) -DCONFIG_TPL_BUILD -DCONFIG_SPL_BUILD\ + -DDO_DEPS_ONLY -dM include/common.h | \ + sed -n -f tools/scripts/define2mk.sed > $@.tmp && \ + mv $@.tmp $@ + +$(obj)include/spl-autoconf.mk: $(obj)include/config.h + @$(XECHO) Generating $@ ; \ + set -e ; \ + : Extract the config macros ; \ + $(CPP) $(CFLAGS) -DCONFIG_SPL_BUILD -DDO_DEPS_ONLY -dM include/common.h | \ + sed -n -f tools/scripts/define2mk.sed > $@.tmp && \ + mv $@.tmp $@ + $(obj)include/generated/generic-asm-offsets.h: $(obj)include/autoconf.mk.dep \ + $(obj)include/spl-autoconf.mk \ + $(obj)include/tpl-autoconf.mk \ $(obj)lib/asm-offsets.s @$(XECHO) Generating $@ tools/scripts/make-asm-offsets $(obj)lib/asm-offsets.s $@ $(obj)lib/asm-offsets.s: $(obj)include/autoconf.mk.dep \ + $(obj)include/spl-autoconf.mk \ + $(obj)include/tpl-autoconf.mk \ $(src)lib/asm-offsets.c @mkdir -p $(obj)lib $(CC) -DDO_DEPS_ONLY \ @@ -701,11 +748,15 @@ $(obj)lib/asm-offsets.s: $(obj)include/autoconf.mk.dep \ -o $@ $(src)lib/asm-offsets.c -c -S $(obj)include/generated/asm-offsets.h: $(obj)include/autoconf.mk.dep \ + $(obj)include/spl-autoconf.mk \ + $(obj)include/tpl-autoconf.mk \ $(obj)$(CPUDIR)/$(SOC)/asm-offsets.s @$(XECHO) Generating $@ tools/scripts/make-asm-offsets $(obj)$(CPUDIR)/$(SOC)/asm-offsets.s $@ -$(obj)$(CPUDIR)/$(SOC)/asm-offsets.s: $(obj)include/autoconf.mk.dep +$(obj)$(CPUDIR)/$(SOC)/asm-offsets.s: $(obj)include/autoconf.mk.dep \ + $(obj)include/spl-autoconf.mk \ + $(obj)include/tpl-autoconf.mk @mkdir -p $(obj)$(CPUDIR)/$(SOC) if [ -f $(src)$(CPUDIR)/$(SOC)/asm-offsets.c ];then \ $(CC) -DDO_DEPS_ONLY \ @@ -777,7 +828,9 @@ include/license.h: tools/bin2header COPYING unconfig: @rm -f $(obj)include/config.h $(obj)include/config.mk \ $(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \ - $(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep + $(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep \ + $(obj)include/spl-autoconf.mk \ + $(obj)include/tpl-autoconf.mk %_config:: unconfig @$(MKCONFIG) -A $(@:_config=) @@ -863,6 +916,8 @@ clobber: tidy @rm -f $(obj)nand_spl/{u-boot-nand_spl.lds,u-boot-spl,u-boot-spl.map} @rm -f $(obj)spl/{u-boot-spl,u-boot-spl.bin,u-boot-spl.map} @rm -f $(obj)spl/u-boot-spl.lds + @rm -f $(obj)tpl/{u-boot-tpl,u-boot-tpl.bin,u-boot-tpl.map} + @rm -f $(obj)tpl/u-boot-spl.lds @rm -f $(obj)MLO MLO.byteswap @rm -f $(obj)SPL @rm -f $(obj)tools/xway-swap-bytes @@ -406,13 +406,25 @@ The following options need to be configured: This is the value to write into CCSR offset 0x18600 according to the A004510 workaround. + CONFIG_SYS_FSL_DSP_DDR_ADDR + This value denotes start offset of DDR memory which is + connected exclusively to the DSP cores. + CONFIG_SYS_FSL_DSP_M2_RAM_ADDR This value denotes start offset of M2 memory which is directly connected to the DSP core. + CONFIG_SYS_FSL_DSP_M3_RAM_ADDR + This value denotes start offset of M3 memory which is directly + connected to the DSP core. + CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT This value denotes start offset of DSP CCSR space. + CONFIG_SYS_FSL_DDR_EMU + Specify emulator support for DDR. Some DDR features such as + deskew training are not available. + - Generic CPU options: CONFIG_SYS_BIG_ENDIAN, CONFIG_SYS_LITTLE_ENDIAN @@ -3078,6 +3090,14 @@ FIT uImage format: Support for NAND boot using simple NAND drivers that expose the cmd_ctrl() interface. + CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT + Set for the SPL on PPC mpc8xxx targets, support for + arch/powerpc/cpu/mpc8xxx/ddr/libddr.o in SPL binary. + + CONFIG_SPL_COMMON_INIT_DDR + Set for common ddr init with serial presence detect in + SPL binary. + CONFIG_SYS_NAND_5_ADDR_CYCLE, CONFIG_SYS_NAND_PAGE_COUNT, CONFIG_SYS_NAND_PAGE_SIZE, CONFIG_SYS_NAND_OOBSIZE, CONFIG_SYS_NAND_BLOCK_SIZE, CONFIG_SYS_NAND_BAD_BLOCK_POS, @@ -3147,6 +3167,17 @@ FIT uImage format: option to re-enable it. This will affect the output of the bootm command when booting a FIT image. +- TPL framework + CONFIG_TPL + Enable building of TPL globally. + + CONFIG_TPL_PAD_TO + Image offset to which the TPL should be padded before appending + the TPL payload. By default, this is defined as + CONFIG_SPL_MAX_SIZE, or 0 if CONFIG_SPL_MAX_SIZE is undefined. + CONFIG_SPL_PAD_TO must be either 0, meaning to append the SPL + payload without any padding, or >= CONFIG_SPL_MAX_SIZE. + Modem Support: -------------- @@ -4184,6 +4215,11 @@ Low Level (hardware related) configuration options: that is executed before the actual U-Boot. E.g. when compiling a NAND SPL. +- CONFIG_TPL_BUILD + Modifies the behaviour of start.S when compiling a loader + that is executed after the SPL and before the actual U-Boot. + It is loaded by the SPL. + - CONFIG_SYS_MPC85XX_NO_RESETVEC Only for 85xx systems. If this variable is specified, the section .resetvec is not kept and the section .bootpg is placed in the @@ -4630,6 +4666,12 @@ List of environment variables (most likely not complete): npe_ucode - set load address for the NPE microcode + silent_linux - If set then linux will be told to boot silently, by + changing the console to be empty. If "yes" it will be + made silent. If "no" it will not be made silent. If + unset, then it will be made silent if the U-Boot console + is silent. + tftpsrcport - If this is set, the value is used for TFTP's UDP source port. diff --git a/arch/arm/config.mk b/arch/arm/config.mk index 540a119..ce3903b 100644 --- a/arch/arm/config.mk +++ b/arch/arm/config.mk @@ -8,7 +8,7 @@ CROSS_COMPILE ?= arm-linux- ifndef CONFIG_STANDALONE_LOAD_ADDR -ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI814X),) +ifneq ($(CONFIG_OMAP_COMMON),) CONFIG_STANDALONE_LOAD_ADDR = 0x80300000 else CONFIG_STANDALONE_LOAD_ADDR = 0xc100000 diff --git a/arch/arm/cpu/arm1136/omap24xx/reset.S b/arch/arm/cpu/arm1136/omap24xx/reset.S deleted file mode 100644 index dd0752b..0000000 --- a/arch/arm/cpu/arm1136/omap24xx/reset.S +++ /dev/null @@ -1,26 +0,0 @@ -/* - * armboot - Startup Code for OMP2420/ARM1136 CPU-core - * - * Copyright (c) 2004 Texas Instruments <r-woodruff2@ti.com> - * - * Copyright (c) 2001 Marius Gröger <mag@sysgo.de> - * Copyright (c) 2002 Alex Züpke <azu@sysgo.de> - * Copyright (c) 2002 Gary Jennejohn <garyj@denx.de> - * Copyright (c) 2003 Richard Woodruff <r-woodruff2@ti.com> - * Copyright (c) 2003 Kshitij <kshitij@ti.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <asm/arch/omap2420.h> - -.globl reset_cpu -reset_cpu: - ldr r1, rstctl /* get addr for global reset reg */ - mov r3, #0x2 /* full reset pll+mpu */ - str r3, [r1] /* force reset */ - mov r0, r0 -_loop_forever: - b _loop_forever -rstctl: - .word PM_RSTCTRL_WKUP diff --git a/arch/arm/cpu/arm1136/omap24xx/timer.c b/arch/arm/cpu/arm1136/omap24xx/timer.c deleted file mode 100644 index b1eef27d..0000000 --- a/arch/arm/cpu/arm1136/omap24xx/timer.c +++ /dev/null @@ -1,136 +0,0 @@ -/* - * (C) Copyright 2004 - * Texas Instruments - * Richard Woodruff <r-woodruff2@ti.com> - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * Alex Zuepke <azu@sysgo.de> - * - * (C) Copyright 2002 - * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/bits.h> -#include <asm/arch/omap2420.h> - -#define TIMER_CLOCK (CONFIG_SYS_CLK_FREQ / (2 << CONFIG_SYS_PTV)) -#define TIMER_LOAD_VAL 0 - -/* macro to read the 32 bit timer */ -#define READ_TIMER readl(CONFIG_SYS_TIMERBASE+TCRR) \ - / (TIMER_CLOCK / CONFIG_SYS_HZ) - -DECLARE_GLOBAL_DATA_PTR; - -int timer_init (void) -{ - int32_t val; - - /* Start the counter ticking up */ - *((int32_t *) (CONFIG_SYS_TIMERBASE + TLDR)) = TIMER_LOAD_VAL; /* reload value on overflow*/ - val = (CONFIG_SYS_PTV << 2) | BIT5 | BIT1 | BIT0; /* mask to enable timer*/ - *((int32_t *) (CONFIG_SYS_TIMERBASE + TCLR)) = val; /* start timer */ - - /* reset time */ - gd->arch.lastinc = READ_TIMER; /* capture current incrementer value */ - gd->arch.tbl = 0; /* start "advancing" time stamp */ - - return(0); -} -/* - * timer without interrupts - */ -ulong get_timer (ulong base) -{ - return get_timer_masked () - base; -} - -/* delay x useconds AND preserve advance timestamp value */ -void __udelay (unsigned long usec) -{ - ulong tmo, tmp; - - if (usec >= 1000) { /* if "big" number, spread normalization to seconds */ - tmo = usec / 1000; /* start to normalize for usec to ticks per sec */ - tmo *= CONFIG_SYS_HZ; /* find number of "ticks" to wait to achieve target */ - tmo /= 1000; /* finish normalize. */ - } else { /* else small number, don't kill it prior to HZ multiply */ - tmo = usec * CONFIG_SYS_HZ; - tmo /= (1000*1000); - } - - tmp = get_timer (0); /* get current timestamp */ - if ((tmo + tmp + 1) < tmp) { /* if setting this forward will roll */ - /* time stamp, then reset time */ - gd->arch.lastinc = READ_TIMER; /* capture incrementer value */ - gd->arch.tbl = 0; /* start time stamp */ - } else { - tmo += tmp; /* else, set advancing stamp wake up time */ - } - while (get_timer_masked () < tmo)/* loop till event */ - /*NOP*/; -} - -ulong get_timer_masked (void) -{ - ulong now = READ_TIMER; /* current tick value */ - - if (now >= gd->arch.lastinc) { /* normal mode (non roll) */ - /* move stamp fordward with absoulte diff ticks */ - gd->arch.tbl += (now - gd->arch.lastinc); - } else { - /* we have rollover of incrementer */ - gd->arch.tbl += ((0xFFFFFFFF / (TIMER_CLOCK / CONFIG_SYS_HZ)) - - gd->arch.lastinc) + now; - } - gd->arch.lastinc = now; - return gd->arch.tbl; -} - -/* waits specified delay value and resets timestamp */ -void udelay_masked (unsigned long usec) -{ - ulong tmo; - ulong endtime; - signed long diff; - - if (usec >= 1000) { /* if "big" number, spread normalization to seconds */ - tmo = usec / 1000; /* start to normalize for usec to ticks per sec */ - tmo *= CONFIG_SYS_HZ; /* find number of "ticks" to wait to achieve target */ - tmo /= 1000; /* finish normalize. */ - } else { /* else small number, don't kill it prior to HZ multiply */ - tmo = usec * CONFIG_SYS_HZ; - tmo /= (1000*1000); - } - endtime = get_timer_masked () + tmo; - - do { - ulong now = get_timer_masked (); - diff = endtime - now; - } while (diff >= 0); -} - -/* - * This function is derived from PowerPC code (read timebase as long long). - * On ARM it just returns the timer value. - */ -unsigned long long get_ticks(void) -{ - return get_timer(0); -} -/* - * This function is derived from PowerPC code (timebase clock frequency). - * On ARM it returns the number of timer ticks per second. - */ -ulong get_tbclk (void) -{ - ulong tbclk; - tbclk = CONFIG_SYS_HZ; - return tbclk; -} diff --git a/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c b/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c index f6bf1ef..a3bbbb8 100644 --- a/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c +++ b/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c @@ -299,7 +299,11 @@ int arch_cpu_init(void) */ writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST | DAVINCI_UART_PWREMU_MGMT_UTRST), +#if (CONFIG_SYS_NS16550_COM1 == DAVINCI_UART0_BASE) + &davinci_uart0_ctrl_regs->pwremu_mgmt); +#else &davinci_uart2_ctrl_regs->pwremu_mgmt); +#endif #if defined(CONFIG_SYS_DA850_DDR_INIT) da850_ddr_setup(); diff --git a/arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c b/arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c index f603f2f..6105f63 100644 --- a/arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c +++ b/arch/arm/cpu/arm926ejs/davinci/da850_pinmux.c @@ -28,6 +28,11 @@ const struct pinmux_config uart0_pins_txrx[] = { { pinmux(3), 2, 5 }, /* UART0_TXD */ }; +const struct pinmux_config uart0_pins_rtscts[] = { + { pinmux(3), 2, 6 }, + { pinmux(3), 2, 7 }, +}; + const struct pinmux_config uart1_pins_txrx[] = { { pinmux(4), 2, 6 }, /* UART1_RXD */ { pinmux(4), 2, 7 }, /* UART1_TXD */ @@ -51,6 +56,7 @@ const struct pinmux_config emac_pins_rmii[] = { { pinmux(14), 8, 5 }, /* RMII_RXD[1] */ { pinmux(14), 8, 6 }, /* RMII_RXD[0] */ { pinmux(14), 8, 7 }, /* RMII_RXER */ + { pinmux(15), 0, 0 }, /* RMII_MHz_50_CLK */ { pinmux(15), 8, 1 }, /* RMII_CRS_DV */ }; diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile index 2ba88d0..b723e22 100644 --- a/arch/arm/cpu/armv7/Makefile +++ b/arch/arm/cpu/armv7/Makefile @@ -16,7 +16,7 @@ COBJS += cache_v7.o COBJS += cpu.o COBJS += syslib.o -ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_TI814X),) +ifneq ($(CONFIG_AM43XX)$(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_TI81XX),) SOBJS += lowlevel_init.o endif diff --git a/arch/arm/cpu/armv7/am33xx/Makefile b/arch/arm/cpu/armv7/am33xx/Makefile index dbd1ec3..f6a297c 100644 --- a/arch/arm/cpu/armv7/am33xx/Makefile +++ b/arch/arm/cpu/armv7/am33xx/Makefile @@ -10,6 +10,13 @@ LIB = $(obj)lib$(SOC).o COBJS-$(CONFIG_AM33XX) += clock_am33xx.o COBJS-$(CONFIG_TI814X) += clock_ti814x.o +COBJS-$(CONFIG_AM43XX) += clock_am43xx.o + +ifneq ($(CONFIG_AM43XX)$(CONFIG_AM33XX),) +COBJS += clock.o +endif + +COBJS-$(CONFIG_TI816X) += clock_ti816x.o COBJS += sys_info.o COBJS += mem.o COBJS += ddr.o diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c index f1623db..2ea3d69 100644 --- a/arch/arm/cpu/armv7/am33xx/board.c +++ b/arch/arm/cpu/armv7/am33xx/board.c @@ -56,12 +56,6 @@ int cpu_mmc_init(bd_t *bis) } #endif -void setup_clocks_for_console(void) -{ - /* Not yet implemented */ - return; -} - /* AM33XX has two MUSB controllers which can be host or gadget */ #if (defined(CONFIG_MUSB_GADGET) || defined(CONFIG_MUSB_HOST)) && \ (defined(CONFIG_AM335X_USB0) || defined(CONFIG_AM335X_USB1)) @@ -143,7 +137,7 @@ int arch_misc_init(void) } #if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT) -void rtc32k_enable(void) +static void rtc32k_enable(void) { struct rtc_regs *rtc = (struct rtc_regs *)RTC_BASE; @@ -159,11 +153,7 @@ void rtc32k_enable(void) writel((1 << 3) | (1 << 6), &rtc->osc); } -#define UART_RESET (0x1 << 1) -#define UART_CLK_RUNNING_MASK 0x1 -#define UART_SMART_IDLE_EN (0x1 << 0x3) - -void uart_soft_reset(void) +static void uart_soft_reset(void) { struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE; u32 regval; @@ -180,4 +170,58 @@ void uart_soft_reset(void) regval |= UART_SMART_IDLE_EN; writel(regval, &uart_base->uartsyscfg); } + +static void watchdog_disable(void) +{ + struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE; + + writel(0xAAAA, &wdtimer->wdtwspr); + while (readl(&wdtimer->wdtwwps) != 0x0) + ; + writel(0x5555, &wdtimer->wdtwspr); + while (readl(&wdtimer->wdtwwps) != 0x0) + ; +} +#endif + +void s_init(void) +{ + /* + * The ROM will only have set up sufficient pinmux to allow for the + * first 4KiB NOR to be read, we must finish doing what we know of + * the NOR mux in this space in order to continue. + */ +#ifdef CONFIG_NOR_BOOT + enable_norboot_pin_mux(); +#endif + /* + * Save the boot parameters passed from romcode. + * We cannot delay the saving further than this, + * to prevent overwrites. + */ +#ifdef CONFIG_SPL_BUILD + save_omap_boot_params(); #endif +#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT) + watchdog_disable(); + timer_init(); + set_uart_mux_conf(); + setup_clocks_for_console(); + uart_soft_reset(); +#endif +#ifdef CONFIG_NOR_BOOT + gd->baudrate = CONFIG_BAUDRATE; + serial_init(); + gd->have_console = 1; +#else + gd = &gdata; + preloader_console_init(); +#endif +#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT) + prcm_init(); + set_mux_conf_regs(); + /* Enable RTC32K clock */ + rtc32k_enable(); + sdram_init(); +#endif +} diff --git a/arch/arm/cpu/armv7/am33xx/clock.c b/arch/arm/cpu/armv7/am33xx/clock.c new file mode 100644 index 0000000..8e5f3c6 --- /dev/null +++ b/arch/arm/cpu/armv7/am33xx/clock.c @@ -0,0 +1,171 @@ +/* + * clock.c + * + * Clock initialization for AM33XX boards. + * Derived from OMAP4 boards + * + * Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include <common.h> +#include <asm/arch/cpu.h> +#include <asm/arch/clock.h> +#include <asm/arch/hardware.h> +#include <asm/arch/sys_proto.h> +#include <asm/io.h> + +static void setup_post_dividers(const struct dpll_regs *dpll_regs, + const struct dpll_params *params) +{ + /* Setup post-dividers */ + if (params->m2 >= 0) + writel(params->m2, dpll_regs->cm_div_m2_dpll); + if (params->m3 >= 0) + writel(params->m3, dpll_regs->cm_div_m3_dpll); + if (params->m4 >= 0) + writel(params->m4, dpll_regs->cm_div_m4_dpll); + if (params->m5 >= 0) + writel(params->m5, dpll_regs->cm_div_m5_dpll); + if (params->m6 >= 0) + writel(params->m6, dpll_regs->cm_div_m6_dpll); +} + +static inline void do_lock_dpll(const struct dpll_regs *dpll_regs) +{ + clrsetbits_le32(dpll_regs->cm_clkmode_dpll, + CM_CLKMODE_DPLL_DPLL_EN_MASK, + DPLL_EN_LOCK << CM_CLKMODE_DPLL_EN_SHIFT); +} + +static inline void wait_for_lock(const struct dpll_regs *dpll_regs) +{ + if (!wait_on_value(ST_DPLL_CLK_MASK, ST_DPLL_CLK_MASK, + (void *)dpll_regs->cm_idlest_dpll, LDELAY)) { + printf("DPLL locking failed for 0x%x\n", + dpll_regs->cm_clkmode_dpll); + hang(); + } +} + +static inline void do_bypass_dpll(const struct dpll_regs *dpll_regs) +{ + clrsetbits_le32(dpll_regs->cm_clkmode_dpll, + CM_CLKMODE_DPLL_DPLL_EN_MASK, + DPLL_EN_MN_BYPASS << CM_CLKMODE_DPLL_EN_SHIFT); +} + +static inline void wait_for_bypass(const struct dpll_regs *dpll_regs) +{ + if (!wait_on_value(ST_DPLL_CLK_MASK, 0, + (void *)dpll_regs->cm_idlest_dpll, LDELAY)) { + printf("Bypassing DPLL failed 0x%x\n", + dpll_regs->cm_clkmode_dpll); + } +} + +static void bypass_dpll(const struct dpll_regs *dpll_regs) +{ + do_bypass_dpll(dpll_regs); + wait_for_bypass(dpll_regs); +} + +void do_setup_dpll(const struct dpll_regs *dpll_regs, + const struct dpll_params *params) +{ + u32 temp; + + if (!params) + return; + + temp = readl(dpll_regs->cm_clksel_dpll); + + bypass_dpll(dpll_regs); + + /* Set M & N */ + temp &= ~CM_CLKSEL_DPLL_M_MASK; + temp |= (params->m << CM_CLKSEL_DPLL_M_SHIFT) & CM_CLKSEL_DPLL_M_MASK; + + temp &= ~CM_CLKSEL_DPLL_N_MASK; + temp |= (params->n << CM_CLKSEL_DPLL_N_SHIFT) & CM_CLKSEL_DPLL_N_MASK; + + writel(temp, dpll_regs->cm_clksel_dpll); + + setup_post_dividers(dpll_regs, params); + + /* Wait till the DPLL locks */ + do_lock_dpll(dpll_regs); + wait_for_lock(dpll_regs); +} + +static void setup_dplls(void) +{ + const struct dpll_params *params; + do_setup_dpll(&dpll_core_regs, &dpll_core); + do_setup_dpll(&dpll_mpu_regs, &dpll_mpu); + do_setup_dpll(&dpll_per_regs, &dpll_per); + writel(0x300, &cmwkup->clkdcoldodpllper); + + params = get_dpll_ddr_params(); + do_setup_dpll(&dpll_ddr_regs, params); +} + +static inline void wait_for_clk_enable(u32 *clkctrl_addr) +{ + u32 clkctrl, idlest = MODULE_CLKCTRL_IDLEST_DISABLED; + u32 bound = LDELAY; + + while ((idlest == MODULE_CLKCTRL_IDLEST_DISABLED) || + (idlest == MODULE_CLKCTRL_IDLEST_TRANSITIONING)) { + clkctrl = readl(clkctrl_addr); + idlest = (clkctrl & MODULE_CLKCTRL_IDLEST_MASK) >> + MODULE_CLKCTRL_IDLEST_SHIFT; + if (--bound == 0) { + printf("Clock enable failed for 0x%p idlest 0x%x\n", + clkctrl_addr, clkctrl); + return; + } + } +} + +static inline void enable_clock_module(u32 *const clkctrl_addr, u32 enable_mode, + u32 wait_for_enable) +{ + clrsetbits_le32(clkctrl_addr, MODULE_CLKCTRL_MODULEMODE_MASK, + enable_mode << MODULE_CLKCTRL_MODULEMODE_SHIFT); + debug("Enable clock module - %p\n", clkctrl_addr); + if (wait_for_enable) + wait_for_clk_enable(clkctrl_addr); +} + +static inline void enable_clock_domain(u32 *const clkctrl_reg, u32 enable_mode) +{ + clrsetbits_le32(clkctrl_reg, CD_CLKCTRL_CLKTRCTRL_MASK, + enable_mode << CD_CLKCTRL_CLKTRCTRL_SHIFT); + debug("Enable clock domain - %p\n", clkctrl_reg); +} + +void do_enable_clocks(u32 *const *clk_domains, + u32 *const *clk_modules_explicit_en, u8 wait_for_enable) +{ + u32 i, max = 100; + + /* Put the clock domains in SW_WKUP mode */ + for (i = 0; (i < max) && clk_domains[i]; i++) { + enable_clock_domain(clk_domains[i], + CD_CLKCTRL_CLKTRCTRL_SW_WKUP); + } + + /* Clock modules that need to be put in SW_EXPLICIT_EN mode */ + for (i = 0; (i < max) && clk_modules_explicit_en[i]; i++) { + enable_clock_module(clk_modules_explicit_en[i], + MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN, + wait_for_enable); + }; +} + +void prcm_init() +{ + enable_basic_clocks(); + setup_dplls(); +} diff --git a/arch/arm/cpu/armv7/am33xx/clock_am33xx.c b/arch/arm/cpu/armv7/am33xx/clock_am33xx.c index fb3fb43..e5f287b 100644 --- a/arch/arm/cpu/armv7/am33xx/clock_am33xx.c +++ b/arch/arm/cpu/armv7/am33xx/clock_am33xx.c @@ -14,392 +14,129 @@ #include <asm/arch/hardware.h> #include <asm/io.h> -#define PRCM_MOD_EN 0x2 -#define PRCM_FORCE_WAKEUP 0x2 -#define PRCM_FUNCTL 0x0 - -#define PRCM_EMIF_CLK_ACTIVITY BIT(2) -#define PRCM_L3_GCLK_ACTIVITY BIT(4) - -#define PLL_BYPASS_MODE 0x4 -#define ST_MN_BYPASS 0x00000100 -#define ST_DPLL_CLK 0x00000001 -#define CLK_SEL_MASK 0x7ffff -#define CLK_DIV_MASK 0x1f -#define CLK_DIV2_MASK 0x7f -#define CLK_SEL_SHIFT 0x8 -#define CLK_MODE_SEL 0x7 -#define CLK_MODE_MASK 0xfffffff8 -#define CLK_DIV_SEL 0xFFFFFFE0 -#define CPGMAC0_IDLE 0x30000 -#define DPLL_CLKDCOLDO_GATE_CTRL 0x300 - #define OSC (V_OSCK/1000000) -#define MPUPLL_M CONFIG_SYS_MPUCLK -#define MPUPLL_N (OSC-1) -#define MPUPLL_M2 1 - -/* Core PLL Fdll = 1 GHZ, */ -#define COREPLL_M 1000 -#define COREPLL_N (OSC-1) - -#define COREPLL_M4 10 /* CORE_CLKOUTM4 = 200 MHZ */ -#define COREPLL_M5 8 /* CORE_CLKOUTM5 = 250 MHZ */ -#define COREPLL_M6 4 /* CORE_CLKOUTM6 = 500 MHZ */ - -/* - * USB PHY clock is 960 MHZ. Since, this comes directly from Fdll, Fdll - * frequency needs to be set to 960 MHZ. Hence, - * For clkout = 192 MHZ, Fdll = 960 MHZ, divider values are given below - */ -#define PERPLL_M 960 -#define PERPLL_N (OSC-1) -#define PERPLL_M2 5 - -/* DDR Freq is 266 MHZ for now */ -/* Set Fdll = 400 MHZ , Fdll = M * 2 * CLKINP/ N + 1; clkout = Fdll /(2 * M2) */ -#define DDRPLL_M 266 -#define DDRPLL_N (OSC-1) -#define DDRPLL_M2 1 - -const struct cm_perpll *cmper = (struct cm_perpll *)CM_PER; -const struct cm_wkuppll *cmwkup = (struct cm_wkuppll *)CM_WKUP; -const struct cm_dpll *cmdpll = (struct cm_dpll *)CM_DPLL; -const struct cm_rtc *cmrtc = (struct cm_rtc *)CM_RTC; - -static void enable_interface_clocks(void) +struct cm_perpll *const cmper = (struct cm_perpll *)CM_PER; +struct cm_wkuppll *const cmwkup = (struct cm_wkuppll *)CM_WKUP; +struct cm_dpll *const cmdpll = (struct cm_dpll *)CM_DPLL; +struct cm_rtc *const cmrtc = (struct cm_rtc *)CM_RTC; + +const struct dpll_regs dpll_mpu_regs = { + .cm_clkmode_dpll = CM_WKUP + 0x88, + .cm_idlest_dpll = CM_WKUP + 0x20, + .cm_clksel_dpll = CM_WKUP + 0x2C, + .cm_div_m2_dpll = CM_WKUP + 0xA8, +}; + +const struct dpll_regs dpll_core_regs = { + .cm_clkmode_dpll = CM_WKUP + 0x90, + .cm_idlest_dpll = CM_WKUP + 0x5C, + .cm_clksel_dpll = CM_WKUP + 0x68, + .cm_div_m4_dpll = CM_WKUP + 0x80, + .cm_div_m5_dpll = CM_WKUP + 0x84, + .cm_div_m6_dpll = CM_WKUP + 0xD8, +}; + +const struct dpll_regs dpll_per_regs = { + .cm_clkmode_dpll = CM_WKUP + 0x8C, + .cm_idlest_dpll = CM_WKUP + 0x70, + .cm_clksel_dpll = CM_WKUP + 0x9C, + .cm_div_m2_dpll = CM_WKUP + 0xAC, +}; + +const struct dpll_regs dpll_ddr_regs = { + .cm_clkmode_dpll = CM_WKUP + 0x94, + .cm_idlest_dpll = CM_WKUP + 0x34, + .cm_clksel_dpll = CM_WKUP + 0x40, + .cm_div_m2_dpll = CM_WKUP + 0xA0, +}; + +const struct dpll_params dpll_mpu = { + CONFIG_SYS_MPUCLK, OSC-1, 1, -1, -1, -1, -1}; +const struct dpll_params dpll_core = { + 1000, OSC-1, -1, -1, 10, 8, 4}; +const struct dpll_params dpll_per = { + 960, OSC-1, 5, -1, -1, -1, -1}; + +void setup_clocks_for_console(void) { - /* Enable all the Interconnect Modules */ - writel(PRCM_MOD_EN, &cmper->l3clkctrl); - while (readl(&cmper->l3clkctrl) != PRCM_MOD_EN) - ; - - writel(PRCM_MOD_EN, &cmper->l4lsclkctrl); - while (readl(&cmper->l4lsclkctrl) != PRCM_MOD_EN) - ; - - writel(PRCM_MOD_EN, &cmper->l4fwclkctrl); - while (readl(&cmper->l4fwclkctrl) != PRCM_MOD_EN) - ; - - writel(PRCM_MOD_EN, &cmwkup->wkl4wkclkctrl); - while (readl(&cmwkup->wkl4wkclkctrl) != PRCM_MOD_EN) - ; - - writel(PRCM_MOD_EN, &cmper->l3instrclkctrl); - while (readl(&cmper->l3instrclkctrl) != PRCM_MOD_EN) - ; - - writel(PRCM_MOD_EN, &cmper->l4hsclkctrl); - while (readl(&cmper->l4hsclkctrl) != PRCM_MOD_EN) - ; - - writel(PRCM_MOD_EN, &cmwkup->wkgpio0clkctrl); - while (readl(&cmwkup->wkgpio0clkctrl) != PRCM_MOD_EN) - ; -} - -/* - * Force power domain wake up transition - * Ensure that the corresponding interface clock is active before - * using the peripheral - */ -static void power_domain_wkup_transition(void) -{ - writel(PRCM_FORCE_WAKEUP, &cmper->l3clkstctrl); - writel(PRCM_FORCE_WAKEUP, &cmper->l4lsclkstctrl); - writel(PRCM_FORCE_WAKEUP, &cmwkup->wkclkstctrl); - writel(PRCM_FORCE_WAKEUP, &cmper->l4fwclkstctrl); - writel(PRCM_FORCE_WAKEUP, &cmper->l3sclkstctrl); + clrsetbits_le32(&cmwkup->wkclkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK, + CD_CLKCTRL_CLKTRCTRL_SW_WKUP << + CD_CLKCTRL_CLKTRCTRL_SHIFT); + + clrsetbits_le32(&cmper->l4hsclkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK, + CD_CLKCTRL_CLKTRCTRL_SW_WKUP << + CD_CLKCTRL_CLKTRCTRL_SHIFT); + + clrsetbits_le32(&cmwkup->wkup_uart0ctrl, + MODULE_CLKCTRL_MODULEMODE_MASK, + MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << + MODULE_CLKCTRL_MODULEMODE_SHIFT); + clrsetbits_le32(&cmper->uart1clkctrl, + MODULE_CLKCTRL_MODULEMODE_MASK, + MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << + MODULE_CLKCTRL_MODULEMODE_SHIFT); + clrsetbits_le32(&cmper->uart2clkctrl, + MODULE_CLKCTRL_MODULEMODE_MASK, + MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << + MODULE_CLKCTRL_MODULEMODE_SHIFT); + clrsetbits_le32(&cmper->uart3clkctrl, + MODULE_CLKCTRL_MODULEMODE_MASK, + MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << + MODULE_CLKCTRL_MODULEMODE_SHIFT); + clrsetbits_le32(&cmper->uart4clkctrl, + MODULE_CLKCTRL_MODULEMODE_MASK, + MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << + MODULE_CLKCTRL_MODULEMODE_SHIFT); + clrsetbits_le32(&cmper->uart5clkctrl, + MODULE_CLKCTRL_MODULEMODE_MASK, + MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << + MODULE_CLKCTRL_MODULEMODE_SHIFT); } -/* - * Enable the peripheral clock for required peripherals - */ -static void enable_per_clocks(void) +void enable_basic_clocks(void) { - /* Enable the control module though RBL would have done it*/ - writel(PRCM_MOD_EN, &cmwkup->wkctrlclkctrl); - while (readl(&cmwkup->wkctrlclkctrl) != PRCM_MOD_EN) - ; - - /* Enable the module clock */ - writel(PRCM_MOD_EN, &cmper->timer2clkctrl); - while (readl(&cmper->timer2clkctrl) != PRCM_MOD_EN) - ; + u32 *const clk_domains[] = { + &cmper->l3clkstctrl, + &cmper->l4fwclkstctrl, + &cmper->l3sclkstctrl, + &cmper->l4lsclkstctrl, + &cmwkup->wkclkstctrl, + &cmper->emiffwclkctrl, + &cmrtc->clkstctrl, + 0 + }; + + u32 *const clk_modules_explicit_en[] = { + &cmper->l3clkctrl, + &cmper->l4lsclkctrl, + &cmper->l4fwclkctrl, + &cmwkup->wkl4wkclkctrl, + &cmper->l3instrclkctrl, + &cmper->l4hsclkctrl, + &cmwkup->wkgpio0clkctrl, + &cmwkup->wkctrlclkctrl, + &cmper->timer2clkctrl, + &cmper->gpmcclkctrl, + &cmper->elmclkctrl, + &cmper->mmc0clkctrl, + &cmper->mmc1clkctrl, + &cmwkup->wkup_i2c0ctrl, + &cmper->gpio1clkctrl, + &cmper->gpio2clkctrl, + &cmper->gpio3clkctrl, + &cmper->i2c1clkctrl, + &cmper->cpgmac0clkctrl, + &cmper->spi0clkctrl, + &cmrtc->rtcclkctrl, + &cmper->usb0clkctrl, + &cmper->emiffwclkctrl, + &cmper->emifclkctrl, + 0 + }; + + do_enable_clocks(clk_domains, clk_modules_explicit_en, 1); /* Select the Master osc 24 MHZ as Timer2 clock source */ writel(0x1, &cmdpll->clktimer2clk); - - /* UART0 */ - writel(PRCM_MOD_EN, &cmwkup->wkup_uart0ctrl); - while (readl(&cmwkup->wkup_uart0ctrl) != PRCM_MOD_EN) - ; - - /* UART1 */ -#ifdef CONFIG_SERIAL2 - writel(PRCM_MOD_EN, &cmper->uart1clkctrl); - while (readl(&cmper->uart1clkctrl) != PRCM_MOD_EN) - ; -#endif /* CONFIG_SERIAL2 */ - - /* UART2 */ -#ifdef CONFIG_SERIAL3 - writel(PRCM_MOD_EN, &cmper->uart2clkctrl); - while (readl(&cmper->uart2clkctrl) != PRCM_MOD_EN) - ; -#endif /* CONFIG_SERIAL3 */ - - /* UART3 */ -#ifdef CONFIG_SERIAL4 - writel(PRCM_MOD_EN, &cmper->uart3clkctrl); - while (readl(&cmper->uart3clkctrl) != PRCM_MOD_EN) - ; -#endif /* CONFIG_SERIAL4 */ - - /* UART4 */ -#ifdef CONFIG_SERIAL5 - writel(PRCM_MOD_EN, &cmper->uart4clkctrl); - while (readl(&cmper->uart4clkctrl) != PRCM_MOD_EN) - ; -#endif /* CONFIG_SERIAL5 */ - - /* UART5 */ -#ifdef CONFIG_SERIAL6 - writel(PRCM_MOD_EN, &cmper->uart5clkctrl); - while (readl(&cmper->uart5clkctrl) != PRCM_MOD_EN) - ; -#endif /* CONFIG_SERIAL6 */ - - /* GPMC */ - writel(PRCM_MOD_EN, &cmper->gpmcclkctrl); - while (readl(&cmper->gpmcclkctrl) != PRCM_MOD_EN) - ; - - /* ELM */ - writel(PRCM_MOD_EN, &cmper->elmclkctrl); - while (readl(&cmper->elmclkctrl) != PRCM_MOD_EN) - ; - - /* MMC0*/ - writel(PRCM_MOD_EN, &cmper->mmc0clkctrl); - while (readl(&cmper->mmc0clkctrl) != PRCM_MOD_EN) - ; - - /* MMC1 */ - writel(PRCM_MOD_EN, &cmper->mmc1clkctrl); - while (readl(&cmper->mmc1clkctrl) != PRCM_MOD_EN) - ; - - /* i2c0 */ - writel(PRCM_MOD_EN, &cmwkup->wkup_i2c0ctrl); - while (readl(&cmwkup->wkup_i2c0ctrl) != PRCM_MOD_EN) - ; - - /* gpio1 module */ - writel(PRCM_MOD_EN, &cmper->gpio1clkctrl); - while (readl(&cmper->gpio1clkctrl) != PRCM_MOD_EN) - ; - - /* gpio2 module */ - writel(PRCM_MOD_EN, &cmper->gpio2clkctrl); - while (readl(&cmper->gpio2clkctrl) != PRCM_MOD_EN) - ; - - /* gpio3 module */ - writel(PRCM_MOD_EN, &cmper->gpio3clkctrl); - while (readl(&cmper->gpio3clkctrl) != PRCM_MOD_EN) - ; - - /* i2c1 */ - writel(PRCM_MOD_EN, &cmper->i2c1clkctrl); - while (readl(&cmper->i2c1clkctrl) != PRCM_MOD_EN) - ; - - /* Ethernet */ - writel(PRCM_MOD_EN, &cmper->cpgmac0clkctrl); - while ((readl(&cmper->cpgmac0clkctrl) & CPGMAC0_IDLE) != PRCM_FUNCTL) - ; - - /* spi0 */ - writel(PRCM_MOD_EN, &cmper->spi0clkctrl); - while (readl(&cmper->spi0clkctrl) != PRCM_MOD_EN) - ; - - /* RTC */ - writel(PRCM_MOD_EN, &cmrtc->rtcclkctrl); - while (readl(&cmrtc->rtcclkctrl) != PRCM_MOD_EN) - ; - - /* MUSB */ - writel(PRCM_MOD_EN, &cmper->usb0clkctrl); - while (readl(&cmper->usb0clkctrl) != PRCM_MOD_EN) - ; -} - -void mpu_pll_config_val(int mpull_m) -{ - u32 clkmode, clksel, div_m2; - - clkmode = readl(&cmwkup->clkmoddpllmpu); - clksel = readl(&cmwkup->clkseldpllmpu); - div_m2 = readl(&cmwkup->divm2dpllmpu); - - /* Set the PLL to bypass Mode */ - writel(PLL_BYPASS_MODE, &cmwkup->clkmoddpllmpu); - while (readl(&cmwkup->idlestdpllmpu) != ST_MN_BYPASS) - ; - - clksel = clksel & (~CLK_SEL_MASK); - clksel = clksel | ((mpull_m << CLK_SEL_SHIFT) | MPUPLL_N); - writel(clksel, &cmwkup->clkseldpllmpu); - - div_m2 = div_m2 & ~CLK_DIV_MASK; - div_m2 = div_m2 | MPUPLL_M2; - writel(div_m2, &cmwkup->divm2dpllmpu); - - clkmode = clkmode | CLK_MODE_SEL; - writel(clkmode, &cmwkup->clkmoddpllmpu); - - while (readl(&cmwkup->idlestdpllmpu) != ST_DPLL_CLK) - ; -} - -static void mpu_pll_config(void) -{ - mpu_pll_config_val(CONFIG_SYS_MPUCLK); -} - -static void core_pll_config(void) -{ - u32 clkmode, clksel, div_m4, div_m5, div_m6; - - clkmode = readl(&cmwkup->clkmoddpllcore); - clksel = readl(&cmwkup->clkseldpllcore); - div_m4 = readl(&cmwkup->divm4dpllcore); - div_m5 = readl(&cmwkup->divm5dpllcore); - div_m6 = readl(&cmwkup->divm6dpllcore); - - /* Set the PLL to bypass Mode */ - writel(PLL_BYPASS_MODE, &cmwkup->clkmoddpllcore); - - while (readl(&cmwkup->idlestdpllcore) != ST_MN_BYPASS) - ; - - clksel = clksel & (~CLK_SEL_MASK); - clksel = clksel | ((COREPLL_M << CLK_SEL_SHIFT) | COREPLL_N); - writel(clksel, &cmwkup->clkseldpllcore); - - div_m4 = div_m4 & ~CLK_DIV_MASK; - div_m4 = div_m4 | COREPLL_M4; - writel(div_m4, &cmwkup->divm4dpllcore); - - div_m5 = div_m5 & ~CLK_DIV_MASK; - div_m5 = div_m5 | COREPLL_M5; - writel(div_m5, &cmwkup->divm5dpllcore); - - div_m6 = div_m6 & ~CLK_DIV_MASK; - div_m6 = div_m6 | COREPLL_M6; - writel(div_m6, &cmwkup->divm6dpllcore); - - clkmode = clkmode | CLK_MODE_SEL; - writel(clkmode, &cmwkup->clkmoddpllcore); - - while (readl(&cmwkup->idlestdpllcore) != ST_DPLL_CLK) - ; -} - -static void per_pll_config(void) -{ - u32 clkmode, clksel, div_m2; - - clkmode = readl(&cmwkup->clkmoddpllper); - clksel = readl(&cmwkup->clkseldpllper); - div_m2 = readl(&cmwkup->divm2dpllper); - - /* Set the PLL to bypass Mode */ - writel(PLL_BYPASS_MODE, &cmwkup->clkmoddpllper); - - while (readl(&cmwkup->idlestdpllper) != ST_MN_BYPASS) - ; - - clksel = clksel & (~CLK_SEL_MASK); - clksel = clksel | ((PERPLL_M << CLK_SEL_SHIFT) | PERPLL_N); - writel(clksel, &cmwkup->clkseldpllper); - - div_m2 = div_m2 & ~CLK_DIV2_MASK; - div_m2 = div_m2 | PERPLL_M2; - writel(div_m2, &cmwkup->divm2dpllper); - - clkmode = clkmode | CLK_MODE_SEL; - writel(clkmode, &cmwkup->clkmoddpllper); - - while (readl(&cmwkup->idlestdpllper) != ST_DPLL_CLK) - ; - - writel(DPLL_CLKDCOLDO_GATE_CTRL, &cmwkup->clkdcoldodpllper); -} - -void ddr_pll_config(unsigned int ddrpll_m) -{ - u32 clkmode, clksel, div_m2; - - clkmode = readl(&cmwkup->clkmoddpllddr); - clksel = readl(&cmwkup->clkseldpllddr); - div_m2 = readl(&cmwkup->divm2dpllddr); - - /* Set the PLL to bypass Mode */ - clkmode = (clkmode & CLK_MODE_MASK) | PLL_BYPASS_MODE; - writel(clkmode, &cmwkup->clkmoddpllddr); - - /* Wait till bypass mode is enabled */ - while ((readl(&cmwkup->idlestdpllddr) & ST_MN_BYPASS) - != ST_MN_BYPASS) - ; - - clksel = clksel & (~CLK_SEL_MASK); - clksel = clksel | ((ddrpll_m << CLK_SEL_SHIFT) | DDRPLL_N); - writel(clksel, &cmwkup->clkseldpllddr); - - div_m2 = div_m2 & CLK_DIV_SEL; - div_m2 = div_m2 | DDRPLL_M2; - writel(div_m2, &cmwkup->divm2dpllddr); - - clkmode = (clkmode & CLK_MODE_MASK) | CLK_MODE_SEL; - writel(clkmode, &cmwkup->clkmoddpllddr); - - /* Wait till dpll is locked */ - while ((readl(&cmwkup->idlestdpllddr) & ST_DPLL_CLK) != ST_DPLL_CLK) - ; -} - -void enable_emif_clocks(void) -{ - /* Enable the EMIF_FW Functional clock */ - writel(PRCM_MOD_EN, &cmper->emiffwclkctrl); - /* Enable EMIF0 Clock */ - writel(PRCM_MOD_EN, &cmper->emifclkctrl); - /* Poll if module is functional */ - while ((readl(&cmper->emifclkctrl)) != PRCM_MOD_EN) - ; -} - -/* - * Configure the PLL/PRCM for necessary peripherals - */ -void pll_init() -{ - mpu_pll_config(); - core_pll_config(); - per_pll_config(); - - /* Enable the required interconnect clocks */ - enable_interface_clocks(); - - /* Power domain wake up transition */ - power_domain_wkup_transition(); - - /* Enable the required peripherals */ - enable_per_clocks(); } diff --git a/arch/arm/cpu/armv7/am33xx/clock_am43xx.c b/arch/arm/cpu/armv7/am33xx/clock_am43xx.c new file mode 100644 index 0000000..c4890f2 --- /dev/null +++ b/arch/arm/cpu/armv7/am33xx/clock_am43xx.c @@ -0,0 +1,110 @@ +/* + * clock_am43xx.c + * + * clocks for AM43XX based boards + * Derived from AM33XX based boards + * + * Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/cpu.h> +#include <asm/arch/clock.h> +#include <asm/arch/hardware.h> +#include <asm/arch/sys_proto.h> +#include <asm/io.h> + +struct cm_perpll *const cmper = (struct cm_perpll *)CM_PER; +struct cm_wkuppll *const cmwkup = (struct cm_wkuppll *)CM_WKUP; + +const struct dpll_regs dpll_mpu_regs = { + .cm_clkmode_dpll = CM_WKUP + 0x560, + .cm_idlest_dpll = CM_WKUP + 0x564, + .cm_clksel_dpll = CM_WKUP + 0x56c, + .cm_div_m2_dpll = CM_WKUP + 0x570, +}; + +const struct dpll_regs dpll_core_regs = { + .cm_clkmode_dpll = CM_WKUP + 0x520, + .cm_idlest_dpll = CM_WKUP + 0x524, + .cm_clksel_dpll = CM_WKUP + 0x52C, + .cm_div_m4_dpll = CM_WKUP + 0x538, + .cm_div_m5_dpll = CM_WKUP + 0x53C, + .cm_div_m6_dpll = CM_WKUP + 0x540, +}; + +const struct dpll_regs dpll_per_regs = { + .cm_clkmode_dpll = CM_WKUP + 0x5E0, + .cm_idlest_dpll = CM_WKUP + 0x5E4, + .cm_clksel_dpll = CM_WKUP + 0x5EC, + .cm_div_m2_dpll = CM_WKUP + 0x5F0, +}; + +const struct dpll_regs dpll_ddr_regs = { + .cm_clkmode_dpll = CM_WKUP + 0x5A0, + .cm_idlest_dpll = CM_WKUP + 0x5A4, + .cm_clksel_dpll = CM_WKUP + 0x5AC, + .cm_div_m2_dpll = CM_WKUP + 0x5B0, +}; + +const struct dpll_params dpll_mpu = { + -1, -1, -1, -1, -1, -1, -1}; +const struct dpll_params dpll_core = { + -1, -1, -1, -1, -1, -1, -1}; +const struct dpll_params dpll_per = { + -1, -1, -1, -1, -1, -1, -1}; + +void setup_clocks_for_console(void) +{ + /* Do not add any spl_debug prints in this function */ + clrsetbits_le32(&cmwkup->wkclkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK, + CD_CLKCTRL_CLKTRCTRL_SW_WKUP << + CD_CLKCTRL_CLKTRCTRL_SHIFT); + + /* Enable UART0 */ + clrsetbits_le32(&cmwkup->wkup_uart0ctrl, + MODULE_CLKCTRL_MODULEMODE_MASK, + MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << + MODULE_CLKCTRL_MODULEMODE_SHIFT); +} + +void enable_basic_clocks(void) +{ + u32 *const clk_domains[] = { + &cmper->l3clkstctrl, + &cmper->l3sclkstctrl, + &cmper->l4lsclkstctrl, + &cmwkup->wkclkstctrl, + &cmper->emifclkstctrl, + 0 + }; + + u32 *const clk_modules_explicit_en[] = { + &cmper->l3clkctrl, + &cmper->l4lsclkctrl, + &cmper->l4fwclkctrl, + &cmwkup->wkl4wkclkctrl, + &cmper->l3instrclkctrl, + &cmper->l4hsclkctrl, + &cmwkup->wkgpio0clkctrl, + &cmwkup->wkctrlclkctrl, + &cmper->timer2clkctrl, + &cmper->gpmcclkctrl, + &cmper->elmclkctrl, + &cmper->mmc0clkctrl, + &cmper->mmc1clkctrl, + &cmwkup->wkup_i2c0ctrl, + &cmper->gpio1clkctrl, + &cmper->gpio2clkctrl, + &cmper->gpio3clkctrl, + &cmper->i2c1clkctrl, + &cmper->emiffwclkctrl, + &cmper->emifclkctrl, + &cmper->otfaemifclkctrl, + 0 + }; + + do_enable_clocks(clk_domains, clk_modules_explicit_en, 1); +} diff --git a/arch/arm/cpu/armv7/am33xx/clock_ti814x.c b/arch/arm/cpu/armv7/am33xx/clock_ti814x.c index 658772b..ef14f47 100644 --- a/arch/arm/cpu/armv7/am33xx/clock_ti814x.c +++ b/arch/arm/cpu/armv7/am33xx/clock_ti814x.c @@ -100,103 +100,8 @@ struct ad_pll { #define OSC_SRC_CTRL (PLL_SUBSYS_BASE + 0x2C0) -/* PRCM */ #define ENET_CLKCTRL_CMPL 0x30000 -#define CM_DEFAULT_BASE (PRCM_BASE + 0x0500) - -struct cm_def { - unsigned int resv0[2]; - unsigned int l3fastclkstctrl; - unsigned int resv1[1]; - unsigned int pciclkstctrl; - unsigned int resv2[1]; - unsigned int ducaticlkstctrl; - unsigned int resv3[1]; - unsigned int emif0clkctrl; - unsigned int emif1clkctrl; - unsigned int dmmclkctrl; - unsigned int fwclkctrl; - unsigned int resv4[10]; - unsigned int usbclkctrl; - unsigned int resv5[1]; - unsigned int sataclkctrl; - unsigned int resv6[4]; - unsigned int ducaticlkctrl; - unsigned int pciclkctrl; -}; - -#define CM_ALWON_BASE (PRCM_BASE + 0x1400) - -struct cm_alwon { - unsigned int l3slowclkstctrl; - unsigned int ethclkstctrl; - unsigned int l3medclkstctrl; - unsigned int mmu_clkstctrl; - unsigned int mmucfg_clkstctrl; - unsigned int ocmc0clkstctrl; - unsigned int vcpclkstctrl; - unsigned int mpuclkstctrl; - unsigned int sysclk4clkstctrl; - unsigned int sysclk5clkstctrl; - unsigned int sysclk6clkstctrl; - unsigned int rtcclkstctrl; - unsigned int l3fastclkstctrl; - unsigned int resv0[67]; - unsigned int mcasp0clkctrl; - unsigned int mcasp1clkctrl; - unsigned int mcasp2clkctrl; - unsigned int mcbspclkctrl; - unsigned int uart0clkctrl; - unsigned int uart1clkctrl; - unsigned int uart2clkctrl; - unsigned int gpio0clkctrl; - unsigned int gpio1clkctrl; - unsigned int i2c0clkctrl; - unsigned int i2c1clkctrl; - unsigned int mcasp345clkctrl; - unsigned int atlclkctrl; - unsigned int mlbclkctrl; - unsigned int pataclkctrl; - unsigned int resv1[1]; - unsigned int uart3clkctrl; - unsigned int uart4clkctrl; - unsigned int uart5clkctrl; - unsigned int wdtimerclkctrl; - unsigned int spiclkctrl; - unsigned int mailboxclkctrl; - unsigned int spinboxclkctrl; - unsigned int mmudataclkctrl; - unsigned int resv2[2]; - unsigned int mmucfgclkctrl; - unsigned int resv3[2]; - unsigned int ocmc0clkctrl; - unsigned int vcpclkctrl; - unsigned int resv4[2]; - unsigned int controlclkctrl; - unsigned int resv5[2]; - unsigned int gpmcclkctrl; - unsigned int ethernet0clkctrl; - unsigned int ethernet1clkctrl; - unsigned int mpuclkctrl; - unsigned int debugssclkctrl; - unsigned int l3clkctrl; - unsigned int l4hsclkctrl; - unsigned int l4lsclkctrl; - unsigned int rtcclkctrl; - unsigned int tpccclkctrl; - unsigned int tptc0clkctrl; - unsigned int tptc1clkctrl; - unsigned int tptc2clkctrl; - unsigned int tptc3clkctrl; - unsigned int resv7[4]; - unsigned int dcan01clkctrl; - unsigned int mmchs0clkctrl; - unsigned int mmchs1clkctrl; - unsigned int mmchs2clkctrl; - unsigned int custefuseclkctrl; -}; - #define SATA_PLL_BASE (CTRL_BASE + 0x0720) struct sata_pll { @@ -264,11 +169,6 @@ const struct sata_pll *spll = (struct sata_pll *)SATA_PLL_BASE; */ static void enable_per_clocks(void) { - /* UART0 */ - writel(PRCM_MOD_EN, &cmalwon->uart0clkctrl); - while (readl(&cmalwon->uart0clkctrl) != PRCM_MOD_EN) - ; - /* HSMMC1 */ writel(PRCM_MOD_EN, &cmalwon->mmchs1clkctrl); while (readl(&cmalwon->mmchs1clkctrl) != PRCM_MOD_EN) @@ -282,6 +182,12 @@ static void enable_per_clocks(void) writel(PRCM_MOD_EN, &cmalwon->ethernet1clkctrl); while ((readl(&cmalwon->ethernet1clkctrl) & ENET_CLKCTRL_CMPL) != 0) ; + + /* RTC clocks */ + writel(PRCM_MOD_EN, &cmalwon->rtcclkstctrl); + writel(PRCM_MOD_EN, &cmalwon->rtcclkctrl); + while (readl(&cmalwon->rtcclkctrl) != PRCM_MOD_EN) + ; } /* @@ -455,8 +361,6 @@ void sata_pll_config(void) ; } -void enable_emif_clocks(void) {}; - void enable_dmm_clocks(void) { writel(PRCM_MOD_EN, &cmdef->fwclkctrl); @@ -477,13 +381,19 @@ void enable_dmm_clocks(void) ; } +void setup_clocks_for_console(void) +{ + unlock_pll_control_mmr(); + /* UART0 */ + writel(PRCM_MOD_EN, &cmalwon->uart0clkctrl); + while (readl(&cmalwon->uart0clkctrl) != PRCM_MOD_EN) + ; +} /* * Configure the PLL/PRCM for necessary peripherals */ -void pll_init() +void prcm_init(void) { - unlock_pll_control_mmr(); - /* Enable the control module */ writel(PRCM_MOD_EN, &cmalwon->controlclkctrl); diff --git a/arch/arm/cpu/armv7/am33xx/clock_ti816x.c b/arch/arm/cpu/armv7/am33xx/clock_ti816x.c new file mode 100644 index 0000000..ace4a5a --- /dev/null +++ b/arch/arm/cpu/armv7/am33xx/clock_ti816x.c @@ -0,0 +1,445 @@ +/* + * clock_ti816x.c + * + * Clocks for TI816X based boards + * + * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com> + * Antoine Tenart, <atenart@adeneo-embedded.com> + * + * Based on TI-PSP-04.00.02.14 : + * + * Copyright (C) 2009, Texas Instruments, Incorporated + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <common.h> +#include <asm/arch/ddr_defs.h> +#include <asm/arch/cpu.h> +#include <asm/arch/clock.h> +#include <asm/arch/hardware.h> +#include <asm/io.h> + +#include <asm/emif.h> + +#define CM_PLL_BASE (CTRL_BASE + 0x0400) + +/* Main PLL */ +#define MAIN_N 64 +#define MAIN_P 0x1 +#define MAIN_INTFREQ1 0x8 +#define MAIN_FRACFREQ1 0x800000 +#define MAIN_MDIV1 0x2 +#define MAIN_INTFREQ2 0xE +#define MAIN_FRACFREQ2 0x0 +#define MAIN_MDIV2 0x1 +#define MAIN_INTFREQ3 0x8 +#define MAIN_FRACFREQ3 0xAAAAB0 +#define MAIN_MDIV3 0x3 +#define MAIN_INTFREQ4 0x9 +#define MAIN_FRACFREQ4 0x55554F +#define MAIN_MDIV4 0x3 +#define MAIN_INTFREQ5 0x9 +#define MAIN_FRACFREQ5 0x374BC6 +#define MAIN_MDIV5 0xC +#define MAIN_MDIV6 0x48 +#define MAIN_MDIV7 0x4 + +/* DDR PLL */ +#if defined(CONFIG_TI816X_DDR_PLL_400) /* 400 MHz */ +#define DDR_N 59 +#define DDR_P 0x1 +#define DDR_MDIV1 0x4 +#define DDR_INTFREQ2 0x8 +#define DDR_FRACFREQ2 0xD99999 +#define DDR_MDIV2 0x1E +#define DDR_INTFREQ3 0x8 +#define DDR_FRACFREQ3 0x0 +#define DDR_MDIV3 0x4 +#define DDR_INTFREQ4 0xE /* Expansion DDR clk */ +#define DDR_FRACFREQ4 0x0 +#define DDR_MDIV4 0x4 +#define DDR_INTFREQ5 0xE /* Expansion DDR clk */ +#define DDR_FRACFREQ5 0x0 +#define DDR_MDIV5 0x4 +#elif defined(CONFIG_TI816X_DDR_PLL_531) /* 531 MHz */ +#define DDR_N 59 +#define DDR_P 0x1 +#define DDR_MDIV1 0x3 +#define DDR_INTFREQ2 0x8 +#define DDR_FRACFREQ2 0xD99999 +#define DDR_MDIV2 0x1E +#define DDR_INTFREQ3 0x8 +#define DDR_FRACFREQ3 0x0 +#define DDR_MDIV3 0x4 +#define DDR_INTFREQ4 0xE /* Expansion DDR clk */ +#define DDR_FRACFREQ4 0x0 +#define DDR_MDIV4 0x4 +#define DDR_INTFREQ5 0xE /* Expansion DDR clk */ +#define DDR_FRACFREQ5 0x0 +#define DDR_MDIV5 0x4 +#elif defined(CONFIG_TI816X_DDR_PLL_675) /* 675 MHz */ +#define DDR_N 50 +#define DDR_P 0x1 +#define DDR_MDIV1 0x2 +#define DDR_INTFREQ2 0x9 +#define DDR_FRACFREQ2 0x0 +#define DDR_MDIV2 0x19 +#define DDR_INTFREQ3 0x13 +#define DDR_FRACFREQ3 0x800000 +#define DDR_MDIV3 0x2 +#define DDR_INTFREQ4 0xE /* Expansion DDR clk */ +#define DDR_FRACFREQ4 0x0 +#define DDR_MDIV4 0x4 +#define DDR_INTFREQ5 0xE /* Expansion DDR clk */ +#define DDR_FRACFREQ5 0x0 +#define DDR_MDIV5 0x4 +#elif defined(CONFIG_TI816X_DDR_PLL_796) /* 796 MHz */ +#define DDR_N 59 +#define DDR_P 0x1 +#define DDR_MDIV1 0x2 +#define DDR_INTFREQ2 0x8 +#define DDR_FRACFREQ2 0xD99999 +#define DDR_MDIV2 0x1E +#define DDR_INTFREQ3 0x8 +#define DDR_FRACFREQ3 0x0 +#define DDR_MDIV3 0x4 +#define DDR_INTFREQ4 0xE /* Expansion DDR clk */ +#define DDR_FRACFREQ4 0x0 +#define DDR_MDIV4 0x4 +#define DDR_INTFREQ5 0xE /* Expansion DDR clk */ +#define DDR_FRACFREQ5 0x0 +#define DDR_MDIV5 0x4 +#endif + +#define CONTROL_STATUS (CTRL_BASE + 0x40) +#define DDR_RCD (CTRL_BASE + 0x070C) +#define CM_TIMER1_CLKSEL (PRCM_BASE + 0x390) +#define DMM_PAT_BASE_ADDR (DMM_BASE + 0x420) +#define CM_ALWON_CUST_EFUSE_CLKCTRL (PRCM_BASE + 0x1628) + +#define INTCPS_SYSCONFIG 0x48200010 +#define CM_SYSCLK10_CLKSEL 0x48180324 + +struct cm_pll { + unsigned int mainpll_ctrl; /* offset 0x400 */ + unsigned int mainpll_pwd; + unsigned int mainpll_freq1; + unsigned int mainpll_div1; + unsigned int mainpll_freq2; + unsigned int mainpll_div2; + unsigned int mainpll_freq3; + unsigned int mainpll_div3; + unsigned int mainpll_freq4; + unsigned int mainpll_div4; + unsigned int mainpll_freq5; + unsigned int mainpll_div5; + unsigned int resv0[1]; + unsigned int mainpll_div6; + unsigned int resv1[1]; + unsigned int mainpll_div7; + unsigned int ddrpll_ctrl; /* offset 0x440 */ + unsigned int ddrpll_pwd; + unsigned int resv2[1]; + unsigned int ddrpll_div1; + unsigned int ddrpll_freq2; + unsigned int ddrpll_div2; + unsigned int ddrpll_freq3; + unsigned int ddrpll_div3; + unsigned int ddrpll_freq4; + unsigned int ddrpll_div4; + unsigned int ddrpll_freq5; + unsigned int ddrpll_div5; + unsigned int videopll_ctrl; /* offset 0x470 */ + unsigned int videopll_pwd; + unsigned int videopll_freq1; + unsigned int videopll_div1; + unsigned int videopll_freq2; + unsigned int videopll_div2; + unsigned int videopll_freq3; + unsigned int videopll_div3; + unsigned int resv3[4]; + unsigned int audiopll_ctrl; /* offset 0x4A0 */ + unsigned int audiopll_pwd; + unsigned int resv4[2]; + unsigned int audiopll_freq2; + unsigned int audiopll_div2; + unsigned int audiopll_freq3; + unsigned int audiopll_div3; + unsigned int audiopll_freq4; + unsigned int audiopll_div4; + unsigned int audiopll_freq5; + unsigned int audiopll_div5; +}; + +const struct cm_alwon *cmalwon = (struct cm_alwon *)CM_ALWON_BASE; +const struct cm_def *cmdef = (struct cm_def *)CM_DEFAULT_BASE; +const struct cm_pll *cmpll = (struct cm_pll *)CM_PLL_BASE; +const struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE; + +void enable_dmm_clocks(void) +{ + writel(PRCM_MOD_EN, &cmdef->l3fastclkstctrl); + writel(PRCM_MOD_EN, &cmdef->emif0clkctrl); + writel(PRCM_MOD_EN, &cmdef->emif1clkctrl); + + /* Wait for clocks to be active */ + while ((readl(&cmdef->l3fastclkstctrl) & 0x300) != 0x300) + ; + /* Wait for emif0 to be fully functional, including OCP */ + while (((readl(&cmdef->emif0clkctrl) >> 17) & 0x3) != 0) + ; + /* Wait for emif1 to be fully functional, including OCP */ + while (((readl(&cmdef->emif1clkctrl) >> 17) & 0x3) != 0) + ; + + writel(PRCM_MOD_EN, &cmdef->dmmclkctrl); + /* Wait for dmm to be fully functional, including OCP */ + while (((readl(&cmdef->dmmclkctrl) >> 17) & 0x3) != 0) + ; + + /* Enable Tiled Access */ + writel(0x80000000, DMM_PAT_BASE_ADDR); +} + +/* assume delay is aprox at least 1us */ +static void ddr_delay(int d) +{ + int i; + + /* + * read a control register. + * this is a bit more delay and cannot be optimized by the compiler + * assuming one read takes 200 cycles and A8 is runing 1 GHz + * somewhat conservative setting + */ + for (i = 0; i < 50*d; i++) + readl(CONTROL_STATUS); +} + +static void main_pll_init_ti816x(void) +{ + u32 main_pll_ctrl = 0; + + /* Put the PLL in bypass mode by setting BIT2 in its ctrl reg */ + main_pll_ctrl = readl(&cmpll->mainpll_ctrl); + main_pll_ctrl &= 0xFFFFFFFB; + main_pll_ctrl |= BIT(2); + writel(main_pll_ctrl, &cmpll->mainpll_ctrl); + + /* Enable PLL by setting BIT3 in its ctrl reg */ + main_pll_ctrl = readl(&cmpll->mainpll_ctrl); + main_pll_ctrl &= 0xFFFFFFF7; + main_pll_ctrl |= BIT(3); + writel(main_pll_ctrl, &cmpll->mainpll_ctrl); + + /* Write the values of N,P in the CTRL reg */ + main_pll_ctrl = readl(&cmpll->mainpll_ctrl); + main_pll_ctrl &= 0xFF; + main_pll_ctrl |= (MAIN_N<<16 | MAIN_P<<8); + writel(main_pll_ctrl, &cmpll->mainpll_ctrl); + + /* Power up clock1-7 */ + writel(0x0, &cmpll->mainpll_pwd); + + /* Program the freq and divider values for clock1-7 */ + writel((1<<31 | 1<<28 | (MAIN_INTFREQ1<<24) | MAIN_FRACFREQ1), + &cmpll->mainpll_freq1); + writel(((1<<8) | MAIN_MDIV1), &cmpll->mainpll_div1); + + writel((1<<31 | 1<<28 | (MAIN_INTFREQ2<<24) | MAIN_FRACFREQ2), + &cmpll->mainpll_freq2); + writel(((1<<8) | MAIN_MDIV2), &cmpll->mainpll_div2); + + writel((1<<31 | 1<<28 | (MAIN_INTFREQ3<<24) | MAIN_FRACFREQ3), + &cmpll->mainpll_freq3); + writel(((1<<8) | MAIN_MDIV3), &cmpll->mainpll_div3); + + writel((1<<31 | 1<<28 | (MAIN_INTFREQ4<<24) | MAIN_FRACFREQ4), + &cmpll->mainpll_freq4); + writel(((1<<8) | MAIN_MDIV4), &cmpll->mainpll_div4); + + writel((1<<31 | 1<<28 | (MAIN_INTFREQ5<<24) | MAIN_FRACFREQ5), + &cmpll->mainpll_freq5); + writel(((1<<8) | MAIN_MDIV5), &cmpll->mainpll_div5); + + writel((1<<8 | MAIN_MDIV6), &cmpll->mainpll_div6); + + writel((1<<8 | MAIN_MDIV7), &cmpll->mainpll_div7); + + /* Wait for PLL to lock */ + while ((readl(&cmpll->mainpll_ctrl) & BIT(7)) != BIT(7)) + ; + + /* Put the PLL in normal mode, disable bypass */ + main_pll_ctrl = readl(&cmpll->mainpll_ctrl); + main_pll_ctrl &= 0xFFFFFFFB; + writel(main_pll_ctrl, &cmpll->mainpll_ctrl); +} + +static void ddr_pll_bypass_ti816x(void) +{ + u32 ddr_pll_ctrl = 0; + + /* Put the PLL in bypass mode by setting BIT2 in its ctrl reg */ + ddr_pll_ctrl = readl(&cmpll->ddrpll_ctrl); + ddr_pll_ctrl &= 0xFFFFFFFB; + ddr_pll_ctrl |= BIT(2); + writel(ddr_pll_ctrl, &cmpll->ddrpll_ctrl); +} + +static void ddr_pll_init_ti816x(void) +{ + u32 ddr_pll_ctrl = 0; + /* Enable PLL by setting BIT3 in its ctrl reg */ + ddr_pll_ctrl = readl(&cmpll->ddrpll_ctrl); + ddr_pll_ctrl &= 0xFFFFFFF7; + ddr_pll_ctrl |= BIT(3); + writel(ddr_pll_ctrl, &cmpll->ddrpll_ctrl); + + /* Write the values of N,P in the CTRL reg */ + ddr_pll_ctrl = readl(&cmpll->ddrpll_ctrl); + ddr_pll_ctrl &= 0xFF; + ddr_pll_ctrl |= (DDR_N<<16 | DDR_P<<8); + writel(ddr_pll_ctrl, &cmpll->ddrpll_ctrl); + + ddr_delay(10); + + /* Power up clock1-5 */ + writel(0x0, &cmpll->ddrpll_pwd); + + /* Program the freq and divider values for clock1-3 */ + writel(((0<<8) | DDR_MDIV1), &cmpll->ddrpll_div1); + ddr_delay(1); + writel(((1<<8) | DDR_MDIV1), &cmpll->ddrpll_div1); + writel((1<<31 | 1<<28 | (DDR_INTFREQ2<<24) | DDR_FRACFREQ2), + &cmpll->ddrpll_freq2); + writel(((1<<8) | DDR_MDIV2), &cmpll->ddrpll_div2); + writel(((0<<8) | DDR_MDIV3), &cmpll->ddrpll_div3); + ddr_delay(1); + writel(((1<<8) | DDR_MDIV3), &cmpll->ddrpll_div3); + ddr_delay(1); + writel((0<<31 | 1<<28 | (DDR_INTFREQ3<<24) | DDR_FRACFREQ3), + &cmpll->ddrpll_freq3); + ddr_delay(1); + writel((1<<31 | 1<<28 | (DDR_INTFREQ3<<24) | DDR_FRACFREQ3), + &cmpll->ddrpll_freq3); + + ddr_delay(5); + + /* Wait for PLL to lock */ + while ((readl(&cmpll->ddrpll_ctrl) & BIT(7)) != BIT(7)) + ; + + /* Power up RCD */ + writel(BIT(0), DDR_RCD); +} + +static void peripheral_enable(void) +{ + /* Wake-up the l3_slow clock */ + writel(PRCM_MOD_EN, &cmalwon->l3slowclkstctrl); + + /* + * Note on Timers: + * There are 8 timers(0-7) out of which timer 0 is a secure timer. + * Timer 0 mux should not be changed + * + * To access the timer registers we need the to be + * enabled which is what we do in the first step + */ + + /* Enable timer1 */ + writel(PRCM_MOD_EN, &cmalwon->timer1clkctrl); + /* Select timer1 clock to be CLKIN (27MHz) */ + writel(BIT(1), CM_TIMER1_CLKSEL); + + /* Wait for timer1 to be ON-ACTIVE */ + while (((readl(&cmalwon->l3slowclkstctrl) + & (0x80000<<1))>>20) != 1) + ; + /* Wait for timer1 to be enabled */ + while (((readl(&cmalwon->timer1clkctrl) & 0x30000)>>16) != 0) + ; + /* Active posted mode */ + writel(PRCM_MOD_EN, (DM_TIMER1_BASE + 0x54)); + while (readl(DM_TIMER1_BASE + 0x10) & BIT(0)) + ; + /* Start timer1 */ + writel(BIT(0), (DM_TIMER1_BASE + 0x38)); + + /* eFuse */ + writel(PRCM_MOD_EN, CM_ALWON_CUST_EFUSE_CLKCTRL); + while (readl(CM_ALWON_CUST_EFUSE_CLKCTRL) != PRCM_MOD_EN) + ; + + /* Enable gpio0 */ + writel(PRCM_MOD_EN, &cmalwon->gpio0clkctrl); + while (readl(&cmalwon->gpio0clkctrl) != PRCM_MOD_EN) + ; + writel((BIT(8)), &cmalwon->gpio0clkctrl); + + /* Enable spi */ + writel(PRCM_MOD_EN, &cmalwon->spiclkctrl); + while (readl(&cmalwon->spiclkctrl) != PRCM_MOD_EN) + ; + + /* Enable i2c0 */ + writel(PRCM_MOD_EN, &cmalwon->i2c0clkctrl); + while (readl(&cmalwon->i2c0clkctrl) != PRCM_MOD_EN) + ; + + /* Enable ethernet0 */ + writel(PRCM_MOD_EN, &cmalwon->ethclkstctrl); + writel(PRCM_MOD_EN, &cmalwon->ethernet0clkctrl); + writel(PRCM_MOD_EN, &cmalwon->ethernet1clkctrl); + + /* Enable hsmmc */ + writel(PRCM_MOD_EN, &cmalwon->sdioclkctrl); + while (readl(&cmalwon->sdioclkctrl) != PRCM_MOD_EN) + ; +} + +void setup_clocks_for_console(void) +{ + /* Fix ROM code bug - from TI-PSP-04.00.02.14 */ + writel(0x0, CM_SYSCLK10_CLKSEL); + + ddr_pll_bypass_ti816x(); + + /* Enable uart0-2 */ + writel(PRCM_MOD_EN, &cmalwon->uart0clkctrl); + while (readl(&cmalwon->uart0clkctrl) != PRCM_MOD_EN) + ; + writel(PRCM_MOD_EN, &cmalwon->uart1clkctrl); + while (readl(&cmalwon->uart1clkctrl) != PRCM_MOD_EN) + ; + writel(PRCM_MOD_EN, &cmalwon->uart2clkctrl); + while (readl(&cmalwon->uart2clkctrl) != PRCM_MOD_EN) + ; + while ((readl(&cmalwon->l3slowclkstctrl) & 0x2100) != 0x2100) + ; +} + +void prcm_init(void) +{ + /* Enable the control */ + writel(PRCM_MOD_EN, &cmalwon->controlclkctrl); + + main_pll_init_ti816x(); + ddr_pll_init_ti816x(); + + /* + * With clk freqs setup to desired values, + * enable the required peripherals + */ + peripheral_enable(); +} diff --git a/arch/arm/cpu/armv7/am33xx/emif4.c b/arch/arm/cpu/armv7/am33xx/emif4.c index 55dc321..59ad25c 100644 --- a/arch/arm/cpu/armv7/am33xx/emif4.c +++ b/arch/arm/cpu/armv7/am33xx/emif4.c @@ -40,9 +40,11 @@ void dram_init_banksize(void) static struct dmm_lisa_map_regs *hw_lisa_map_regs = (struct dmm_lisa_map_regs *)DMM_BASE; #endif +#ifndef CONFIG_TI816X static struct vtp_reg *vtpreg[2] = { (struct vtp_reg *)VTP0_CTRL_ADDR, (struct vtp_reg *)VTP1_CTRL_ADDR}; +#endif #ifdef CONFIG_AM33XX static struct ddr_ctrl *ddrctrl = (struct ddr_ctrl *)DDR_CTRL_ADDR; #endif @@ -64,6 +66,7 @@ void config_dmm(const struct dmm_lisa_map_regs *regs) } #endif +#ifndef CONFIG_TI816X static void config_vtp(int nr) { writel(readl(&vtpreg[nr]->vtp0ctrlreg) | VTP_CTRL_ENABLE, @@ -78,14 +81,20 @@ static void config_vtp(int nr) VTP_CTRL_READY) ; } +#endif + +void __weak ddr_pll_config(unsigned int ddrpll_m) +{ +} void config_ddr(unsigned int pll, unsigned int ioctrl, const struct ddr_data *data, const struct cmd_control *ctrl, const struct emif_regs *regs, int nr) { - enable_emif_clocks(); ddr_pll_config(pll); +#ifndef CONFIG_TI816X config_vtp(nr); +#endif config_cmd_ctrl(ctrl, nr); config_ddr_data(data, nr); diff --git a/arch/arm/cpu/armv7/at91/sama5d3_devices.c b/arch/arm/cpu/armv7/at91/sama5d3_devices.c index 4a3fca5..e55e1c6 100644 --- a/arch/arm/cpu/armv7/at91/sama5d3_devices.c +++ b/arch/arm/cpu/armv7/at91/sama5d3_devices.c @@ -144,6 +144,30 @@ void at91_macb_hw_init(void) /* Enable clock */ at91_periph_clk_enable(ATMEL_ID_EMAC); } + +void at91_gmac_hw_init(void) +{ + at91_set_a_periph(AT91_PIO_PORTB, 0, 0); /* GTX0 */ + at91_set_a_periph(AT91_PIO_PORTB, 1, 0); /* GTX1 */ + at91_set_a_periph(AT91_PIO_PORTB, 2, 0); /* GTX2 */ + at91_set_a_periph(AT91_PIO_PORTB, 3, 0); /* GTX3 */ + at91_set_a_periph(AT91_PIO_PORTB, 4, 0); /* GRX0 */ + at91_set_a_periph(AT91_PIO_PORTB, 5, 0); /* GRX1 */ + at91_set_a_periph(AT91_PIO_PORTB, 6, 0); /* GRX2 */ + at91_set_a_periph(AT91_PIO_PORTB, 7, 0); /* GRX3 */ + at91_set_a_periph(AT91_PIO_PORTB, 8, 0); /* GTXCK */ + at91_set_a_periph(AT91_PIO_PORTB, 9, 0); /* GTXEN */ + + at91_set_a_periph(AT91_PIO_PORTB, 11, 0); /* GRXCK */ + at91_set_a_periph(AT91_PIO_PORTB, 13, 0); /* GRXER */ + + at91_set_a_periph(AT91_PIO_PORTB, 16, 0); /* GMDC */ + at91_set_a_periph(AT91_PIO_PORTB, 17, 0); /* GMDIO */ + at91_set_a_periph(AT91_PIO_PORTB, 18, 0); /* G125CK */ + + /* Enable clock */ + at91_periph_clk_enable(ATMEL_ID_GMAC); +} #endif #ifdef CONFIG_LCD diff --git a/arch/arm/cpu/armv7/mx5/clock.c b/arch/arm/cpu/armv7/mx5/clock.c index fbbb365..6bef254 100644 --- a/arch/arm/cpu/armv7/mx5/clock.c +++ b/arch/arm/cpu/armv7/mx5/clock.c @@ -85,7 +85,7 @@ void set_usboh3_clk(void) MXC_CCM_CSCDR1_USBOH3_CLK_PODF(1)); } -void enable_usboh3_clk(unsigned char enable) +void enable_usboh3_clk(bool enable) { unsigned int cg = enable ? MXC_CCM_CCGR_CG_ON : MXC_CCM_CCGR_CG_OFF; @@ -122,7 +122,7 @@ void set_usb_phy_clk(void) } #if defined(CONFIG_MX51) -void enable_usb_phy1_clk(unsigned char enable) +void enable_usb_phy1_clk(bool enable) { unsigned int cg = enable ? MXC_CCM_CCGR_CG_ON : MXC_CCM_CCGR_CG_OFF; @@ -131,12 +131,12 @@ void enable_usb_phy1_clk(unsigned char enable) MXC_CCM_CCGR2_USB_PHY(cg)); } -void enable_usb_phy2_clk(unsigned char enable) +void enable_usb_phy2_clk(bool enable) { /* i.MX51 has a single USB PHY clock, so do nothing here. */ } #elif defined(CONFIG_MX53) -void enable_usb_phy1_clk(unsigned char enable) +void enable_usb_phy1_clk(bool enable) { unsigned int cg = enable ? MXC_CCM_CCGR_CG_ON : MXC_CCM_CCGR_CG_OFF; @@ -145,7 +145,7 @@ void enable_usb_phy1_clk(unsigned char enable) MXC_CCM_CCGR4_USB_PHY1(cg)); } -void enable_usb_phy2_clk(unsigned char enable) +void enable_usb_phy2_clk(bool enable) { unsigned int cg = enable ? MXC_CCM_CCGR_CG_ON : MXC_CCM_CCGR_CG_OFF; diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile index 98f29d4..75b3753 100644 --- a/arch/arm/cpu/armv7/omap-common/Makefile +++ b/arch/arm/cpu/armv7/omap-common/Makefile @@ -21,7 +21,7 @@ COBJS += vc.o COBJS += abb.o endif -ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI814X),) +ifeq ($(CONFIG_OMAP34XX),) COBJS += boot-common.o SOBJS += lowlevel_init.o endif diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c index 6b9ce36..6b4772b 100644 --- a/arch/arm/cpu/armv7/omap-common/boot-common.c +++ b/arch/arm/cpu/armv7/omap-common/boot-common.c @@ -40,7 +40,8 @@ void save_omap_boot_params(void) if ((boot_device >= MMC_BOOT_DEVICES_START) && (boot_device <= MMC_BOOT_DEVICES_END)) { -#if !defined(CONFIG_AM33XX) && !defined(CONFIG_TI81XX) +#if !defined(CONFIG_AM33XX) && !defined(CONFIG_TI81XX) && \ + !defined(CONFIG_AM43XX) if ((omap_hw_init_context() == OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL)) { gd->arch.omap_boot_params.omap_bootmode = diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c index ece3655..b0e1caa 100644 --- a/arch/arm/cpu/armv7/omap-common/emif-common.c +++ b/arch/arm/cpu/armv7/omap-common/emif-common.c @@ -153,7 +153,7 @@ static void lpddr2_init(u32 base, const struct emif_regs *regs) * un-locked frequency & default RL */ writel(regs->sdram_config_init, &emif->emif_sdram_config); - writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1); + writel(regs->emif_ddr_phy_ctlr_1_init, &emif->emif_ddr_phy_ctrl_1); do_ext_phy_settings(base, regs); diff --git a/arch/arm/cpu/armv7/omap3/clock.c b/arch/arm/cpu/armv7/omap3/clock.c index 3acbc9c..9f989ff 100644 --- a/arch/arm/cpu/armv7/omap3/clock.c +++ b/arch/arm/cpu/armv7/omap3/clock.c @@ -183,8 +183,7 @@ static void dpll3_init_34xx(u32 sil_index, u32 clk_index) * if running from flash, jump to small relocated code * area in SRAM. */ - f_lock_pll = (void *) ((u32) &_end_vect - (u32) &_start + - SRAM_VECT_CODE); + f_lock_pll = (void *) (SRAM_CLK_CODE); p0 = readl(&prcm_base->clken_pll); sr32(&p0, 0, 3, PLL_FAST_RELOCK_BYPASS); @@ -401,8 +400,7 @@ static void dpll3_init_36xx(u32 sil_index, u32 clk_index) * if running from flash, jump to small relocated code * area in SRAM. */ - f_lock_pll = (void *) ((u32) &_end_vect - (u32) &_start + - SRAM_VECT_CODE); + f_lock_pll = (void *) (SRAM_CLK_CODE); p0 = readl(&prcm_base->clken_pll); sr32(&p0, 0, 3, PLL_FAST_RELOCK_BYPASS); @@ -478,6 +476,24 @@ static void dpll4_init_36xx(u32 sil_index, u32 clk_index) wait_on_value(ST_PERIPH_CLK, 2, &prcm_base->idlest_ckgen, LDELAY); } +static void dpll5_init_36xx(u32 sil_index, u32 clk_index) +{ + struct prcm *prcm_base = (struct prcm *)PRCM_BASE; + dpll_param *ptr = (dpll_param *) get_36x_per2_dpll_param(); + + /* Moving it to the right sysclk base */ + ptr = ptr + clk_index; + + /* PER2 DPLL (DPLL5) */ + sr32(&prcm_base->clken2_pll, 0, 3, PLL_STOP); + wait_on_value(1, 0, &prcm_base->idlest2_ckgen, LDELAY); + sr32(&prcm_base->clksel5_pll, 0, 5, ptr->m2); /* set M2 (usbtll_fck) */ + sr32(&prcm_base->clksel4_pll, 8, 11, ptr->m); /* set m (11-bit multiplier) */ + sr32(&prcm_base->clksel4_pll, 0, 7, ptr->n); /* set n (7-bit divider)*/ + sr32(&prcm_base->clken2_pll, 0, 3, PLL_LOCK); /* lock mode */ + wait_on_value(1, 1, &prcm_base->idlest2_ckgen, LDELAY); +} + static void mpu_init_36xx(u32 sil_index, u32 clk_index) { struct prcm *prcm_base = (struct prcm *)PRCM_BASE; @@ -582,7 +598,7 @@ void prcm_init(void) dpll3_init_36xx(0, clk_index); dpll4_init_36xx(0, clk_index); - dpll5_init_34xx(0, clk_index); + dpll5_init_36xx(0, clk_index); iva_init_36xx(0, clk_index); mpu_init_36xx(0, clk_index); diff --git a/arch/arm/cpu/armv7/omap3/lowlevel_init.S b/arch/arm/cpu/armv7/omap3/lowlevel_init.S index bdf74ea..6f7261b 100644 --- a/arch/arm/cpu/armv7/omap3/lowlevel_init.S +++ b/arch/arm/cpu/armv7/omap3/lowlevel_init.S @@ -69,15 +69,13 @@ ENDPROC(do_omap3_emu_romcode_call) *************************************************************************/ ENTRY(cpy_clk_code) /* Copy DPLL code into SRAM */ - adr r0, go_to_speed /* get addr of clock setting code */ - mov r2, #384 /* r2 size to copy (div by 32 bytes) */ - mov r1, r1 /* r1 <- dest address (passed in) */ - add r2, r2, r0 /* r2 <- source end address */ + adr r0, go_to_speed /* copy from start of go_to_speed... */ + adr r2, lowlevel_init /* ... up to start of low_level_init */ next2: ldmia r0!, {r3 - r10} /* copy from source address [r0] */ stmia r1!, {r3 - r10} /* copy to target address [r1] */ cmp r0, r2 /* until source end address [r2] */ - bne next2 + blo next2 mov pc, lr /* back to caller */ ENDPROC(cpy_clk_code) @@ -464,6 +462,19 @@ per_36x_dpll_param: .word 26000, 432, 12, 9, 16, 9, 4, 3, 1 .word 38400, 360, 15, 9, 16, 5, 4, 3, 1 +per2_36x_dpll_param: +/* 12MHz */ +.word PER2_36XX_M_12, PER2_36XX_N_12, 0, PER2_36XX_M2_12 +/* 13MHz */ +.word PER2_36XX_M_13, PER2_36XX_N_13, 0, PER2_36XX_M2_13 +/* 19.2MHz */ +.word PER2_36XX_M_19P2, PER2_36XX_N_19P2, 0, PER2_36XX_M2_19P2 +/* 26MHz */ +.word PER2_36XX_M_26, PER2_36XX_N_26, 0, PER2_36XX_M2_26 +/* 38.4MHz */ +.word PER2_36XX_M_38P4, PER2_36XX_N_38P4, 0, PER2_36XX_M2_38P4 + + ENTRY(get_36x_mpu_dpll_param) adr r0, mpu_36x_dpll_param mov pc, lr @@ -483,3 +494,8 @@ ENTRY(get_36x_per_dpll_param) adr r0, per_36x_dpll_param mov pc, lr ENDPROC(get_36x_per_dpll_param) + +ENTRY(get_36x_per2_dpll_param) + adr r0, per2_36x_dpll_param + mov pc, lr +ENDPROC(get_36x_per2_dpll_param) diff --git a/arch/arm/cpu/armv7/omap4/hw_data.c b/arch/arm/cpu/armv7/omap4/hw_data.c index 310df5a..6a225c8 100644 --- a/arch/arm/cpu/armv7/omap4/hw_data.c +++ b/arch/arm/cpu/armv7/omap4/hw_data.c @@ -50,6 +50,7 @@ static const struct dpll_params mpu_dpll_params_1400mhz[NUM_SYS_CLKS] = { /* * dpll locked at 1600 MHz - MPU clk at 800 MHz(OPP Turbo 4430) * OMAP4430 OPP_TURBO frequency + * OMAP4470 OPP_NOM frequency */ static const struct dpll_params mpu_dpll_params_1600mhz[NUM_SYS_CLKS] = { {200, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ @@ -76,6 +77,7 @@ static const struct dpll_params mpu_dpll_params_1200mhz[NUM_SYS_CLKS] = { }; /* OMAP4460 OPP_NOM frequency */ +/* OMAP4470 OPP_NOM (Low Power) frequency */ static const struct dpll_params core_dpll_params_1600mhz[NUM_SYS_CLKS] = { {200, 2, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 12 MHz */ {800, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 13 MHz */ @@ -198,6 +200,20 @@ struct dplls omap4460_dplls = { .ddr = NULL }; +struct dplls omap4470_dplls = { + .mpu = mpu_dpll_params_1600mhz, + .core = core_dpll_params_1600mhz, + .per = per_dpll_params_1536mhz, + .iva = iva_dpll_params_1862mhz, +#ifdef CONFIG_SYS_OMAP_ABE_SYSCK + .abe = abe_dpll_params_sysclk_196608khz, +#else + .abe = &abe_dpll_params_32k_196608khz, +#endif + .usb = usb_dpll_params_1920mhz, + .ddr = NULL +}; + struct pmic_data twl6030_4430es1 = { .base_offset = PHOENIX_SMPS_BASE_VOLT_STD_MODE_UV, .step = 12660, /* 12.66 mV represented in uV */ @@ -208,6 +224,7 @@ struct pmic_data twl6030_4430es1 = { .pmic_write = omap_vc_bypass_send_value, }; +/* twl6030 struct is used for TWL6030 and TWL6032 PMIC */ struct pmic_data twl6030 = { .base_offset = PHOENIX_SMPS_BASE_VOLT_STD_MODE_WITH_OFFSET_UV, .step = 12660, /* 12.66 mV represented in uV */ @@ -271,6 +288,20 @@ struct vcores_data omap4460_volts = { .mm.pmic = &twl6030, }; +struct vcores_data omap4470_volts = { + .mpu.value = 1200, + .mpu.addr = SMPS_REG_ADDR_SMPS1, + .mpu.pmic = &twl6030, + + .core.value = 1126, + .core.addr = SMPS_REG_ADDR_SMPS1, + .core.pmic = &twl6030, + + .mm.value = 1137, + .mm.addr = SMPS_REG_ADDR_SMPS1, + .mm.pmic = &twl6030, +}; + /* * Enable essential clock domains, modules and * do some additional special settings needed @@ -476,6 +507,11 @@ void hw_data_init(void) *omap_vcores = &omap4460_volts; break; + case OMAP4470_ES1_0: + *dplls_data = &omap4470_dplls; + *omap_vcores = &omap4470_volts; + break; + default: printf("\n INVALID OMAP REVISION "); } diff --git a/arch/arm/cpu/armv7/omap4/hwinit.c b/arch/arm/cpu/armv7/omap4/hwinit.c index 4da0fc0..b0598a0 100644 --- a/arch/arm/cpu/armv7/omap4/hwinit.c +++ b/arch/arm/cpu/armv7/omap4/hwinit.c @@ -138,6 +138,9 @@ void init_omap_revision(void) break; case MIDR_CORTEX_A9_R2P10: switch (readl(CONTROL_ID_CODE)) { + case OMAP4470_CONTROL_ID_CODE_ES1_0: + *omap_si_rev = OMAP4470_ES1_0; + break; case OMAP4460_CONTROL_ID_CODE_ES1_1: *omap_si_rev = OMAP4460_ES1_1; break; diff --git a/arch/arm/cpu/armv7/omap4/sdram_elpida.c b/arch/arm/cpu/armv7/omap4/sdram_elpida.c index d76dde7..67a7926 100644 --- a/arch/arm/cpu/armv7/omap4/sdram_elpida.c +++ b/arch/arm/cpu/armv7/omap4/sdram_elpida.c @@ -60,6 +60,20 @@ static const struct emif_regs emif_regs_elpida_380_mhz_1cs = { .emif_ddr_phy_ctlr_1 = 0x049ff418 }; +const struct emif_regs emif_regs_elpida_400_mhz_1cs = { + .sdram_config_init = 0x80800eb2, + .sdram_config = 0x80801ab2, + .ref_ctrl = 0x00000618, + .sdram_tim1 = 0x10eb0662, + .sdram_tim2 = 0x20370dd2, + .sdram_tim3 = 0x00b1c33f, + .read_idle_ctrl = 0x000501ff, + .zq_config = 0x500b3215, + .temp_alert_config = 0x58016893, + .emif_ddr_phy_ctlr_1_init = 0x049ffff5, + .emif_ddr_phy_ctlr_1 = 0x049ff418 +}; + const struct emif_regs emif_regs_elpida_400_mhz_2cs = { .sdram_config_init = 0x80000eb9, .sdram_config = 0x80001ab9, @@ -107,8 +121,10 @@ static void emif_get_reg_dump_sdp(u32 emif_nr, const struct emif_regs **regs) *regs = &emif_regs_elpida_380_mhz_1cs; else if (omap4_rev == OMAP4430_ES2_0) *regs = &emif_regs_elpida_200_mhz_2cs; - else + else if (omap4_rev < OMAP4470_ES1_0) *regs = &emif_regs_elpida_400_mhz_2cs; + else + *regs = &emif_regs_elpida_400_mhz_1cs; } void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs) __attribute__((weak, alias("emif_get_reg_dump_sdp"))); @@ -138,20 +154,31 @@ static const struct lpddr2_device_details elpida_2G_S4_details = { .manufacturer = LPDDR2_MANUFACTURER_ELPIDA }; +static const struct lpddr2_device_details elpida_4G_S4_details = { + .type = LPDDR2_TYPE_S4, + .density = LPDDR2_DENSITY_4Gb, + .io_width = LPDDR2_IO_WIDTH_32, + .manufacturer = LPDDR2_MANUFACTURER_ELPIDA +}; + struct lpddr2_device_details *emif_get_device_details_sdp(u32 emif_nr, u8 cs, struct lpddr2_device_details *lpddr2_dev_details) { u32 omap_rev = omap_revision(); /* EMIF1 & EMIF2 have identical configuration */ - if ((omap_rev == OMAP4430_ES1_0) && (cs == CS1)) { - /* Nothing connected on CS1 for ES1.0 */ + if (((omap_rev == OMAP4430_ES1_0) || (omap_rev == OMAP4470_ES1_0)) + && (cs == CS1)) { + /* Nothing connected on CS1 for 4430/4470 ES1.0 */ return NULL; - } else { - /* In all other cases Elpida 2G device */ + } else if (omap_rev < OMAP4470_ES1_0) { + /* In all other 4430/4460 cases Elpida 2G device */ *lpddr2_dev_details = elpida_2G_S4_details; - return lpddr2_dev_details; + } else { + /* 4470: 4G device */ + *lpddr2_dev_details = elpida_4G_S4_details; } + return lpddr2_dev_details; } struct lpddr2_device_details *emif_get_device_details(u32 emif_nr, u8 cs, @@ -265,7 +292,7 @@ void emif_get_device_timings_sdp(u32 emif_nr, /* Identical devices on EMIF1 & EMIF2 */ *cs0_device_timings = &elpida_2G_S4_timings; - if (omap_rev == OMAP4430_ES1_0) + if ((omap_rev == OMAP4430_ES1_0) || (omap_rev == OMAP4470_ES1_0)) *cs1_device_timings = NULL; else *cs1_device_timings = &elpida_2G_S4_timings; diff --git a/arch/arm/cpu/armv7/tegra114/config.mk b/arch/arm/cpu/armv7/tegra114/config.mk deleted file mode 100644 index cb1a19d..0000000 --- a/arch/arm/cpu/armv7/tegra114/config.mk +++ /dev/null @@ -1,19 +0,0 @@ -# -# Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved. -# -# (C) Copyright 2002 -# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> -# -# This program is free software; you can redistribute it and/or modify it -# under the terms and conditions of the GNU General Public License, -# version 2, as published by the Free Software Foundation. -# -# This program is distributed in the hope it will be useful, but WITHOUT -# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -# more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. -# -CONFIG_ARCH_DEVICE_TREE := tegra114 diff --git a/arch/arm/cpu/armv7/tegra20/config.mk b/arch/arm/cpu/armv7/tegra20/config.mk deleted file mode 100644 index 3cac79b..0000000 --- a/arch/arm/cpu/armv7/tegra20/config.mk +++ /dev/null @@ -1,10 +0,0 @@ -# -# (C) Copyright 2010,2011 -# NVIDIA Corporation <www.nvidia.com> -# -# (C) Copyright 2002 -# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> -# -# SPDX-License-Identifier: GPL-2.0+ -# -CONFIG_ARCH_DEVICE_TREE := tegra20 diff --git a/arch/arm/cpu/armv7/tegra30/config.mk b/arch/arm/cpu/armv7/tegra30/config.mk deleted file mode 100644 index 719ca81..0000000 --- a/arch/arm/cpu/armv7/tegra30/config.mk +++ /dev/null @@ -1,19 +0,0 @@ -# -# Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved. -# -# (C) Copyright 2002 -# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> -# -# This program is free software; you can redistribute it and/or modify it -# under the terms and conditions of the GNU General Public License, -# version 2, as published by the Free Software Foundation. -# -# This program is distributed in the hope it will be useful, but WITHOUT -# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -# more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. -# -CONFIG_ARCH_DEVICE_TREE := tegra30 diff --git a/arch/arm/cpu/armv7/zynq/Makefile b/arch/arm/cpu/armv7/zynq/Makefile index e5494f7..de6b081 100644 --- a/arch/arm/cpu/armv7/zynq/Makefile +++ b/arch/arm/cpu/armv7/zynq/Makefile @@ -14,6 +14,7 @@ LIB = $(obj)lib$(SOC).o COBJS-y := timer.o COBJS-y += cpu.o +COBJS-y += ddrc.o COBJS-y += slcr.o COBJS := $(COBJS-y) diff --git a/arch/arm/cpu/armv7/zynq/ddrc.c b/arch/arm/cpu/armv7/zynq/ddrc.c new file mode 100644 index 0000000..ba6a6ae --- /dev/null +++ b/arch/arm/cpu/armv7/zynq/ddrc.c @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2012 - 2013 Michal Simek <monstr@monstr.eu> + * Copyright (C) 2012 - 2013 Xilinx, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/hardware.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* Control regsiter bitfield definitions */ +#define ZYNQ_DDRC_CTRLREG_BUSWIDTH_MASK 0xC +#define ZYNQ_DDRC_CTRLREG_BUSWIDTH_SHIFT 2 +#define ZYNQ_DDRC_CTRLREG_BUSWIDTH_16BIT 1 + +/* ECC scrub regsiter definitions */ +#define ZYNQ_DDRC_ECC_SCRUBREG_ECC_MODE_MASK 0x7 +#define ZYNQ_DDRC_ECC_SCRUBREG_ECCMODE_SECDED 0x4 + +void zynq_ddrc_init(void) +{ + u32 width, ecctype; + + width = readl(&ddrc_base->ddrc_ctrl); + width = (width & ZYNQ_DDRC_CTRLREG_BUSWIDTH_MASK) >> + ZYNQ_DDRC_CTRLREG_BUSWIDTH_SHIFT; + ecctype = (readl(&ddrc_base->ecc_scrub) & + ZYNQ_DDRC_ECC_SCRUBREG_ECC_MODE_MASK); + + /* ECC is enabled when memory is in 16bit mode and it is enabled */ + if ((ecctype == ZYNQ_DDRC_ECC_SCRUBREG_ECCMODE_SECDED) && + (width == ZYNQ_DDRC_CTRLREG_BUSWIDTH_16BIT)) { + puts("Memory: ECC enabled\n"); + /* + * Clear the first 1MB because it is not initialized from + * first stage bootloader. To get ECC to work all memory has + * been initialized by writing any value. + */ + memset(0, 0, 1 * 1024 * 1024); + } else { + puts("Memory: ECC disabled\n"); + } + + if (width == ZYNQ_DDRC_CTRLREG_BUSWIDTH_16BIT) + gd->ram_size /= 2; +} diff --git a/arch/arm/cpu/armv7/zynq/slcr.c b/arch/arm/cpu/armv7/zynq/slcr.c index e5fe992..717ec65 100644 --- a/arch/arm/cpu/armv7/zynq/slcr.c +++ b/arch/arm/cpu/armv7/zynq/slcr.c @@ -70,7 +70,7 @@ void zynq_slcr_gem_clk_setup(u32 gem_id, u32 rclk, u32 clk) /* Configure GEM_RCLK_CTRL */ writel(rclk, &slcr_base->gem0_rclk_ctrl); } - + udelay(100000); out: zynq_slcr_lock(); } diff --git a/arch/arm/include/asm/arch-am33xx/clock.h b/arch/arm/include/asm/arch-am33xx/clock.h index 44c1e5d..519249e 100644 --- a/arch/arm/include/asm/arch-am33xx/clock.h +++ b/arch/arm/include/asm/arch-am33xx/clock.h @@ -13,4 +13,102 @@ #include <asm/arch/clocks_am33xx.h> +#ifdef CONFIG_TI81XX +#include <asm/arch/clock_ti81xx.h> +#endif + +#define LDELAY 1000000 + +/*CM_<clock_domain>__CLKCTRL */ +#define CD_CLKCTRL_CLKTRCTRL_SHIFT 0 +#define CD_CLKCTRL_CLKTRCTRL_MASK 3 + +#define CD_CLKCTRL_CLKTRCTRL_NO_SLEEP 0 +#define CD_CLKCTRL_CLKTRCTRL_SW_SLEEP 1 +#define CD_CLKCTRL_CLKTRCTRL_SW_WKUP 2 + +/* CM_<clock_domain>_<module>_CLKCTRL */ +#define MODULE_CLKCTRL_MODULEMODE_SHIFT 0 +#define MODULE_CLKCTRL_MODULEMODE_MASK 3 +#define MODULE_CLKCTRL_IDLEST_SHIFT 16 +#define MODULE_CLKCTRL_IDLEST_MASK (3 << 16) + +#define MODULE_CLKCTRL_MODULEMODE_SW_DISABLE 0 +#define MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN 2 + +#define MODULE_CLKCTRL_IDLEST_FULLY_FUNCTIONAL 0 +#define MODULE_CLKCTRL_IDLEST_TRANSITIONING 1 +#define MODULE_CLKCTRL_IDLEST_IDLE 2 +#define MODULE_CLKCTRL_IDLEST_DISABLED 3 + +/* CM_CLKMODE_DPLL */ +#define CM_CLKMODE_DPLL_REGM4XEN_SHIFT 11 +#define CM_CLKMODE_DPLL_REGM4XEN_MASK (1 << 11) +#define CM_CLKMODE_DPLL_LPMODE_EN_SHIFT 10 +#define CM_CLKMODE_DPLL_LPMODE_EN_MASK (1 << 10) +#define CM_CLKMODE_DPLL_RELOCK_RAMP_EN_SHIFT 9 +#define CM_CLKMODE_DPLL_RELOCK_RAMP_EN_MASK (1 << 9) +#define CM_CLKMODE_DPLL_DRIFTGUARD_EN_SHIFT 8 +#define CM_CLKMODE_DPLL_DRIFTGUARD_EN_MASK (1 << 8) +#define CM_CLKMODE_DPLL_RAMP_RATE_SHIFT 5 +#define CM_CLKMODE_DPLL_RAMP_RATE_MASK (0x7 << 5) +#define CM_CLKMODE_DPLL_EN_SHIFT 0 +#define CM_CLKMODE_DPLL_EN_MASK (0x7 << 0) + +#define CM_CLKMODE_DPLL_DPLL_EN_SHIFT 0 +#define CM_CLKMODE_DPLL_DPLL_EN_MASK 7 + +#define DPLL_EN_STOP 1 +#define DPLL_EN_MN_BYPASS 4 +#define DPLL_EN_LOW_POWER_BYPASS 5 +#define DPLL_EN_LOCK 7 + +/* CM_IDLEST_DPLL fields */ +#define ST_DPLL_CLK_MASK 1 + +/* CM_CLKSEL_DPLL */ +#define CM_CLKSEL_DPLL_M_SHIFT 8 +#define CM_CLKSEL_DPLL_M_MASK (0x7FF << 8) +#define CM_CLKSEL_DPLL_N_SHIFT 0 +#define CM_CLKSEL_DPLL_N_MASK 0x7F + +struct dpll_params { + u32 m; + u32 n; + s8 m2; + s8 m3; + s8 m4; + s8 m5; + s8 m6; +}; + +struct dpll_regs { + u32 cm_clkmode_dpll; + u32 cm_idlest_dpll; + u32 cm_autoidle_dpll; + u32 cm_clksel_dpll; + u32 cm_div_m2_dpll; + u32 cm_div_m3_dpll; + u32 cm_div_m4_dpll; + u32 cm_div_m5_dpll; + u32 cm_div_m6_dpll; +}; + +extern const struct dpll_regs dpll_mpu_regs; +extern const struct dpll_regs dpll_core_regs; +extern const struct dpll_regs dpll_per_regs; +extern const struct dpll_regs dpll_ddr_regs; +extern const struct dpll_params dpll_mpu; +extern const struct dpll_params dpll_core; +extern const struct dpll_params dpll_per; +extern const struct dpll_params dpll_ddr; + +extern struct cm_wkuppll *const cmwkup; + +const struct dpll_params *get_dpll_ddr_params(void); +void do_setup_dpll(const struct dpll_regs *, const struct dpll_params *); +void prcm_init(void); +void enable_basic_clocks(void); +void do_enable_clocks(u32 *const *, u32 *const *, u8); + #endif diff --git a/arch/arm/include/asm/arch-am33xx/clock_ti81xx.h b/arch/arm/include/asm/arch-am33xx/clock_ti81xx.h new file mode 100644 index 0000000..f069922 --- /dev/null +++ b/arch/arm/include/asm/arch-am33xx/clock_ti81xx.h @@ -0,0 +1,142 @@ +/* + * ti81xx.h + * + * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com> + * Antoine Tenart, <atenart@adeneo-embedded.com> + * + * This file is released under the terms of GPL v2 and any later version. + * See the file COPYING in the root directory of the source tree for details. + */ + +#ifndef _CLOCK_TI81XX_H_ +#define _CLOCK_TI81XX_H_ + +#define PRCM_MOD_EN 0x2 + +#define CM_DEFAULT_BASE (PRCM_BASE + 0x0500) +#define CM_ALWON_BASE (PRCM_BASE + 0x1400) + +struct cm_def { + unsigned int resv0[2]; + unsigned int l3fastclkstctrl; + unsigned int resv1[1]; + unsigned int pciclkstctrl; + unsigned int resv2[1]; + unsigned int ducaticlkstctrl; + unsigned int resv3[1]; + unsigned int emif0clkctrl; + unsigned int emif1clkctrl; + unsigned int dmmclkctrl; + unsigned int fwclkctrl; + unsigned int resv4[10]; + unsigned int usbclkctrl; + unsigned int resv5[1]; + unsigned int sataclkctrl; + unsigned int resv6[4]; + unsigned int ducaticlkctrl; + unsigned int pciclkctrl; +}; + +struct cm_alwon { + unsigned int l3slowclkstctrl; + unsigned int ethclkstctrl; + unsigned int l3medclkstctrl; + unsigned int mmu_clkstctrl; + unsigned int mmucfg_clkstctrl; + unsigned int ocmc0clkstctrl; +#if defined(CONFIG_TI814X) + unsigned int vcpclkstctrl; +#elif defined(CONFIG_TI816X) + unsigned int ocmc1clkstctrl; +#endif + unsigned int mpuclkstctrl; + unsigned int sysclk4clkstctrl; + unsigned int sysclk5clkstctrl; + unsigned int sysclk6clkstctrl; + unsigned int rtcclkstctrl; + unsigned int l3fastclkstctrl; + unsigned int resv0[67]; + unsigned int mcasp0clkctrl; + unsigned int mcasp1clkctrl; + unsigned int mcasp2clkctrl; + unsigned int mcbspclkctrl; + unsigned int uart0clkctrl; + unsigned int uart1clkctrl; + unsigned int uart2clkctrl; + unsigned int gpio0clkctrl; + unsigned int gpio1clkctrl; + unsigned int i2c0clkctrl; + unsigned int i2c1clkctrl; +#if defined(CONFIG_TI814X) + unsigned int mcasp345clkctrl; + unsigned int atlclkctrl; + unsigned int mlbclkctrl; + unsigned int pataclkctrl; + unsigned int resv1[1]; + unsigned int uart3clkctrl; + unsigned int uart4clkctrl; + unsigned int uart5clkctrl; +#elif defined(CONFIG_TI816X) + unsigned int resv1[1]; + unsigned int timer1clkctrl; + unsigned int timer2clkctrl; + unsigned int timer3clkctrl; + unsigned int timer4clkctrl; + unsigned int timer5clkctrl; + unsigned int timer6clkctrl; + unsigned int timer7clkctrl; +#endif + unsigned int wdtimerclkctrl; + unsigned int spiclkctrl; + unsigned int mailboxclkctrl; + unsigned int spinboxclkctrl; + unsigned int mmudataclkctrl; + unsigned int resv2[2]; + unsigned int mmucfgclkctrl; +#if defined(CONFIG_TI814X) + unsigned int resv3[2]; +#elif defined(CONFIG_TI816X) + unsigned int resv3[1]; + unsigned int sdioclkctrl; +#endif + unsigned int ocmc0clkctrl; +#if defined(CONFIG_TI814X) + unsigned int vcpclkctrl; +#elif defined(CONFIG_TI816X) + unsigned int ocmc1clkctrl; +#endif + unsigned int resv4[2]; + unsigned int controlclkctrl; + unsigned int resv5[2]; + unsigned int gpmcclkctrl; + unsigned int ethernet0clkctrl; + unsigned int ethernet1clkctrl; + unsigned int mpuclkctrl; +#if defined(CONFIG_TI814X) + unsigned int debugssclkctrl; +#elif defined(CONFIG_TI816X) + unsigned int resv6[1]; +#endif + unsigned int l3clkctrl; + unsigned int l4hsclkctrl; + unsigned int l4lsclkctrl; + unsigned int rtcclkctrl; + unsigned int tpccclkctrl; + unsigned int tptc0clkctrl; + unsigned int tptc1clkctrl; + unsigned int tptc2clkctrl; + unsigned int tptc3clkctrl; +#if defined(CONFIG_TI814X) + unsigned int resv6[4]; + unsigned int dcan01clkctrl; + unsigned int mmchs0clkctrl; + unsigned int mmchs1clkctrl; + unsigned int mmchs2clkctrl; + unsigned int custefuseclkctrl; +#elif defined(CONFIG_TI816X) + unsigned int sr0clkctrl; + unsigned int sr1clkctrl; +#endif +}; + +#endif /* _CLOCK_TI81XX_H_ */ diff --git a/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h b/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h index 80e1899..140379f 100644 --- a/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h +++ b/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h @@ -16,8 +16,10 @@ #define CONFIG_SYS_MPUCLK 550 #endif -extern void pll_init(void); -extern void enable_emif_clocks(void); +#define UART_RESET (0x1 << 1) +#define UART_CLK_RUNNING_MASK 0x1 +#define UART_SMART_IDLE_EN (0x1 << 0x3) + extern void enable_dmm_clocks(void); #endif /* endif _CLOCKS_AM33XX_H_ */ diff --git a/arch/arm/include/asm/arch-am33xx/cpu.h b/arch/arm/include/asm/arch-am33xx/cpu.h index bcb4c50..73e6db8 100644 --- a/arch/arm/include/asm/arch-am33xx/cpu.h +++ b/arch/arm/include/asm/arch-am33xx/cpu.h @@ -43,16 +43,29 @@ #define SYSBOOT_MASK (BIT(0) | BIT(1) | BIT(2)\ | BIT(3) | BIT(4)) -/* Reset control */ -#ifdef CONFIG_AM33XX -#define PRM_RSTCTRL (PRCM_BASE + 0x0F00) -#elif defined(CONFIG_TI814X) -#define PRM_RSTCTRL (PRCM_BASE + 0x00A0) -#endif -#define PRM_RSTST (PRM_RSTCTRL + 8) #define PRM_RSTCTRL_RESET 0x01 #define PRM_RSTST_WARM_RESET_MASK 0x232 +/* + * Watchdog: + * Using the prescaler, the OMAP watchdog could go for many + * months before firing. These limits work without scaling, + * with the 60 second default assumed by most tools and docs. + */ +#define TIMER_MARGIN_MAX (24 * 60 * 60) /* 1 day */ +#define TIMER_MARGIN_DEFAULT 60 /* 60 secs */ +#define TIMER_MARGIN_MIN 1 + +#define PTV 0 /* prescale */ +#define GET_WLDR_VAL(secs) (0xffffffff - ((secs) * (32768/(1<<PTV))) + 1) +#define WDT_WWPS_PEND_WCLR BIT(0) +#define WDT_WWPS_PEND_WLDR BIT(2) +#define WDT_WWPS_PEND_WTGR BIT(3) +#define WDT_WWPS_PEND_WSPR BIT(4) + +#define WDT_WCLR_PRE BIT(5) +#define WDT_WCLR_PTV_OFF 2 + #ifndef __KERNEL_STRICT_NAMES #ifndef __ASSEMBLY__ struct gpmc_cs { @@ -108,6 +121,7 @@ struct gpmc { /* Used for board specific gpmc initialization */ extern struct gpmc *gpmc_cfg; +#ifndef CONFIG_AM43XX /* Encapsulating core pll registers */ struct cm_wkuppll { unsigned int wkclkstctrl; /* offset 0x00 */ @@ -199,7 +213,8 @@ struct cm_perpll { unsigned int dcan1clkctrl; /* offset 0xC4 */ unsigned int resv6[2]; unsigned int emiffwclkctrl; /* offset 0xD0 */ - unsigned int resv7[2]; + unsigned int epwmss0clkctrl; /* offset 0xD4 */ + unsigned int epwmss2clkctrl; /* offset 0xD8 */ unsigned int l3instrclkctrl; /* offset 0xDC */ unsigned int l3clkctrl; /* Offset 0xE0 */ unsigned int resv8[4]; @@ -210,12 +225,171 @@ struct cm_perpll { unsigned int l4hsclkctrl; /* offset 0x120 */ unsigned int resv10[8]; unsigned int cpswclkstctrl; /* offset 0x144 */ + unsigned int lcdcclkstctrl; /* offset 0x148 */ }; +#else +/* Encapsulating core pll registers */ +struct cm_wkuppll { + unsigned int resv0[136]; + unsigned int wkl4wkclkctrl; /* offset 0x220 */ + unsigned int resv1[55]; + unsigned int wkclkstctrl; /* offset 0x300 */ + unsigned int resv2[15]; + unsigned int wkup_i2c0ctrl; /* offset 0x340 */ + unsigned int resv3; + unsigned int wkup_uart0ctrl; /* offset 0x348 */ + unsigned int resv4[5]; + unsigned int wkctrlclkctrl; /* offset 0x360 */ + unsigned int resv5; + unsigned int wkgpio0clkctrl; /* offset 0x368 */ + + unsigned int resv6[109]; + unsigned int clkmoddpllcore; /* offset 0x520 */ + unsigned int idlestdpllcore; /* offset 0x524 */ + unsigned int resv61; + unsigned int clkseldpllcore; /* offset 0x52C */ + unsigned int resv7[2]; + unsigned int divm4dpllcore; /* offset 0x538 */ + unsigned int divm5dpllcore; /* offset 0x53C */ + unsigned int divm6dpllcore; /* offset 0x540 */ + + unsigned int resv8[7]; + unsigned int clkmoddpllmpu; /* offset 0x560 */ + unsigned int idlestdpllmpu; /* offset 0x564 */ + unsigned int resv9; + unsigned int clkseldpllmpu; /* offset 0x56c */ + unsigned int divm2dpllmpu; /* offset 0x570 */ + + unsigned int resv10[11]; + unsigned int clkmoddpllddr; /* offset 0x5A0 */ + unsigned int idlestdpllddr; /* offset 0x5A4 */ + unsigned int resv11; + unsigned int clkseldpllddr; /* offset 0x5AC */ + unsigned int divm2dpllddr; /* offset 0x5B0 */ + + unsigned int resv12[11]; + unsigned int clkmoddpllper; /* offset 0x5E0 */ + unsigned int idlestdpllper; /* offset 0x5E4 */ + unsigned int resv13; + unsigned int clkseldpllper; /* offset 0x5EC */ + unsigned int divm2dpllper; /* offset 0x5F0 */ + unsigned int resv14[8]; + unsigned int clkdcoldodpllper; /* offset 0x614 */ + + unsigned int resv15[2]; + unsigned int clkmoddplldisp; /* offset 0x620 */ + unsigned int resv16[2]; + unsigned int clkseldplldisp; /* offset 0x62C */ + unsigned int divm2dplldisp; /* offset 0x630 */ +}; + +/* + * Encapsulating peripheral functional clocks + * pll registers + */ +struct cm_perpll { + unsigned int l3clkstctrl; /* offset 0x00 */ + unsigned int resv0[7]; + unsigned int l3clkctrl; /* Offset 0x20 */ + unsigned int resv1[7]; + unsigned int l3instrclkctrl; /* offset 0x40 */ + unsigned int resv2[3]; + unsigned int ocmcramclkctrl; /* offset 0x50 */ + unsigned int resv3[9]; + unsigned int tpccclkctrl; /* offset 0x78 */ + unsigned int resv4; + unsigned int tptc0clkctrl; /* offset 0x80 */ + + unsigned int resv5[7]; + unsigned int l4hsclkctrl; /* offset 0x0A0 */ + unsigned int resv6; + unsigned int l4fwclkctrl; /* offset 0x0A8 */ + unsigned int resv7[85]; + unsigned int l3sclkstctrl; /* offset 0x200 */ + unsigned int resv8[7]; + unsigned int gpmcclkctrl; /* offset 0x220 */ + unsigned int resv9[5]; + unsigned int mcasp0clkctrl; /* offset 0x238 */ + unsigned int resv10; + unsigned int mcasp1clkctrl; /* offset 0x240 */ + unsigned int resv11; + unsigned int mmc2clkctrl; /* offset 0x248 */ + unsigned int resv12[5]; + unsigned int usb0clkctrl; /* offset 0x260 */ + unsigned int resv13[103]; + unsigned int l4lsclkstctrl; /* offset 0x400 */ + unsigned int resv14[7]; + unsigned int l4lsclkctrl; /* offset 0x420 */ + unsigned int resv15; + unsigned int dcan0clkctrl; /* offset 0x428 */ + unsigned int resv16; + unsigned int dcan1clkctrl; /* offset 0x430 */ + unsigned int resv17[13]; + unsigned int elmclkctrl; /* offset 0x468 */ + + unsigned int resv18[3]; + unsigned int gpio1clkctrl; /* offset 0x478 */ + unsigned int resv19; + unsigned int gpio2clkctrl; /* offset 0x480 */ + unsigned int resv20; + unsigned int gpio3clkctrl; /* offset 0x488 */ + unsigned int resv21[7]; + + unsigned int i2c1clkctrl; /* offset 0x4A8 */ + unsigned int resv22; + unsigned int i2c2clkctrl; /* offset 0x4B0 */ + unsigned int resv23[3]; + unsigned int mmc0clkctrl; /* offset 0x4C0 */ + unsigned int resv24; + unsigned int mmc1clkctrl; /* offset 0x4C8 */ + + unsigned int resv25[13]; + unsigned int spi0clkctrl; /* offset 0x500 */ + unsigned int resv26; + unsigned int spi1clkctrl; /* offset 0x508 */ + unsigned int resv27[9]; + unsigned int timer2clkctrl; /* offset 0x530 */ + unsigned int resv28; + unsigned int timer3clkctrl; /* offset 0x538 */ + unsigned int resv29; + unsigned int timer4clkctrl; /* offset 0x540 */ + unsigned int resv30[5]; + unsigned int timer7clkctrl; /* offset 0x558 */ + + unsigned int resv31[9]; + unsigned int uart1clkctrl; /* offset 0x580 */ + unsigned int resv32; + unsigned int uart2clkctrl; /* offset 0x588 */ + unsigned int resv33; + unsigned int uart3clkctrl; /* offset 0x590 */ + unsigned int resv34; + unsigned int uart4clkctrl; /* offset 0x598 */ + unsigned int resv35; + unsigned int uart5clkctrl; /* offset 0x5A0 */ + unsigned int resv36[87]; + + unsigned int emifclkstctrl; /* offset 0x700 */ + unsigned int resv361[7]; + unsigned int emifclkctrl; /* offset 0x720 */ + unsigned int resv37[3]; + unsigned int emiffwclkctrl; /* offset 0x730 */ + unsigned int resv371; + unsigned int otfaemifclkctrl; /* offset 0x738 */ + unsigned int resv38[57]; + unsigned int lcdclkctrl; /* offset 0x820 */ + unsigned int resv39[183]; + unsigned int cpswclkstctrl; /* offset 0xB00 */ + unsigned int resv40[7]; + unsigned int cpgmac0clkctrl; /* offset 0xB20 */ +}; +#endif /* CONFIG_AM43XX */ /* Encapsulating Display pll registers */ struct cm_dpll { unsigned int resv1[2]; unsigned int clktimer2clk; /* offset 0x08 */ + unsigned int resv2[10]; + unsigned int clklcdcpixelclk; /* offset 0x34 */ }; /* Control Module RTC registers */ @@ -336,6 +510,54 @@ struct ctrl_dev { unsigned int resv4[4]; unsigned int miisel; /* offset 0x50 */ }; + +/* gmii_sel register defines */ +#define GMII1_SEL_MII 0x0 +#define GMII1_SEL_RMII 0x1 +#define GMII1_SEL_RGMII 0x2 +#define GMII2_SEL_MII 0x0 +#define GMII2_SEL_RMII 0x4 +#define GMII2_SEL_RGMII 0x8 +#define RGMII1_IDMODE BIT(4) +#define RGMII2_IDMODE BIT(5) +#define RMII1_IO_CLK_EN BIT(6) +#define RMII2_IO_CLK_EN BIT(7) + +#define MII_MODE_ENABLE (GMII1_SEL_MII | GMII2_SEL_MII) +#define RMII_MODE_ENABLE (GMII1_SEL_RMII | GMII2_SEL_RMII) +#define RGMII_MODE_ENABLE (GMII1_SEL_RGMII | GMII2_SEL_RGMII) +#define RGMII_INT_DELAY (RGMII1_IDMODE | RGMII2_IDMODE) +#define RMII_CHIPCKL_ENABLE (RMII1_IO_CLK_EN | RMII2_IO_CLK_EN) + +/* PWMSS */ +struct pwmss_regs { + unsigned int idver; + unsigned int sysconfig; + unsigned int clkconfig; + unsigned int clkstatus; +}; +#define ECAP_CLK_EN BIT(0) +#define ECAP_CLK_STOP_REQ BIT(1) + +struct pwmss_ecap_regs { + unsigned int tsctr; + unsigned int ctrphs; + unsigned int cap1; + unsigned int cap2; + unsigned int cap3; + unsigned int cap4; + unsigned int resv1[4]; + unsigned short ecctl1; + unsigned short ecctl2; +}; + +/* Capture Control register 2 */ +#define ECTRL2_SYNCOSEL_MASK (0x03 << 6) +#define ECTRL2_MDSL_ECAP BIT(9) +#define ECTRL2_CTRSTP_FREERUN BIT(4) +#define ECTRL2_PLSL_LOW BIT(10) +#define ECTRL2_SYNC_EN BIT(5) + #endif /* __ASSEMBLY__ */ #endif /* __KERNEL_STRICT_NAMES */ diff --git a/arch/arm/include/asm/arch-am33xx/ddr_defs.h b/arch/arm/include/asm/arch-am33xx/ddr_defs.h index 18d7d99..95f7a9a 100644 --- a/arch/arm/include/asm/arch-am33xx/ddr_defs.h +++ b/arch/arm/include/asm/arch-am33xx/ddr_defs.h @@ -192,37 +192,46 @@ struct ddr_data_regs { * correspond to DATA1 registers defined here. */ struct ddr_regs { - unsigned int resv0[7]; - unsigned int cm0csratio; /* offset 0x01C */ + unsigned int resv0[3]; + unsigned int cm0config; /* offset 0x00C */ + unsigned int cm0configclk; /* offset 0x010 */ unsigned int resv1[2]; + unsigned int cm0csratio; /* offset 0x01C */ + unsigned int resv2[2]; unsigned int cm0dldiff; /* offset 0x028 */ unsigned int cm0iclkout; /* offset 0x02C */ - unsigned int resv2[8]; + unsigned int resv3[4]; + unsigned int cm1config; /* offset 0x040 */ + unsigned int cm1configclk; /* offset 0x044 */ + unsigned int resv4[2]; unsigned int cm1csratio; /* offset 0x050 */ - unsigned int resv3[2]; + unsigned int resv5[2]; unsigned int cm1dldiff; /* offset 0x05C */ unsigned int cm1iclkout; /* offset 0x060 */ - unsigned int resv4[8]; + unsigned int resv6[4]; + unsigned int cm2config; /* offset 0x074 */ + unsigned int cm2configclk; /* offset 0x078 */ + unsigned int resv7[2]; unsigned int cm2csratio; /* offset 0x084 */ - unsigned int resv5[2]; + unsigned int resv8[2]; unsigned int cm2dldiff; /* offset 0x090 */ unsigned int cm2iclkout; /* offset 0x094 */ - unsigned int resv6[12]; + unsigned int resv9[12]; unsigned int dt0rdsratio0; /* offset 0x0C8 */ - unsigned int resv7[4]; + unsigned int resv10[4]; unsigned int dt0wdsratio0; /* offset 0x0DC */ - unsigned int resv8[4]; + unsigned int resv11[4]; unsigned int dt0wiratio0; /* offset 0x0F0 */ - unsigned int resv9; + unsigned int resv12; unsigned int dt0wimode0; /* offset 0x0F8 */ unsigned int dt0giratio0; /* offset 0x0FC */ - unsigned int resv10; + unsigned int resv13; unsigned int dt0gimode0; /* offset 0x104 */ unsigned int dt0fwsratio0; /* offset 0x108 */ - unsigned int resv11[4]; + unsigned int resv14[4]; unsigned int dt0dqoffset; /* offset 0x11C */ unsigned int dt0wrsratio0; /* offset 0x120 */ - unsigned int resv12[4]; + unsigned int resv15[4]; unsigned int dt0rdelays0; /* offset 0x134 */ unsigned int dt0dldiff0; /* offset 0x138 */ }; diff --git a/arch/arm/include/asm/arch-am33xx/hardware.h b/arch/arm/include/asm/arch-am33xx/hardware.h index 02f5f8a..ee5fce0 100644 --- a/arch/arm/include/asm/arch-am33xx/hardware.h +++ b/arch/arm/include/asm/arch-am33xx/hardware.h @@ -15,8 +15,12 @@ #include <asm/arch/omap.h> #ifdef CONFIG_AM33XX #include <asm/arch/hardware_am33xx.h> +#elif defined(CONFIG_TI816X) +#include <asm/arch/hardware_ti816x.h> #elif defined(CONFIG_TI814X) #include <asm/arch/hardware_ti814x.h> +#elif defined(CONFIG_AM43XX) +#include <asm/arch/hardware_am43xx.h> #endif /* @@ -45,37 +49,24 @@ #define EMIF4_1_CFG_BASE 0x4D000000 /* PLL related registers */ -#define CM_PER 0x44E00000 -#define CM_WKUP 0x44E00400 #define CM_DPLL 0x44E00500 #define CM_DEVICE 0x44E00700 #define CM_RTC 0x44E00800 #define CM_CEFUSE 0x44E00A00 #define PRM_DEVICE 0x44E00F00 -/* VTP Base address */ -#define VTP1_CTRL_ADDR 0x48140E10 - /* DDR Base address */ #define DDR_CTRL_ADDR 0x44E10E04 #define DDR_CONTROL_BASE_ADDR 0x44E11404 -#define DDR_PHY_CMD_ADDR2 0x47C0C800 -#define DDR_PHY_DATA_ADDR2 0x47C0C8C8 /* UART */ #define DEFAULT_UART_BASE UART0_BASE -#define DDRPHY_0_CONFIG_BASE (CTRL_BASE + 0x1400) -#define DDRPHY_CONFIG_BASE DDRPHY_0_CONFIG_BASE - /* GPMC Base address */ #define GPMC_BASE 0x50000000 /* CPSW Config space */ #define CPSW_BASE 0x4A100000 -/* OTG */ -#define USB0_OTG_BASE 0x47401000 -#define USB1_OTG_BASE 0x47401800 - +int clk_get(int clk); #endif /* __AM33XX_HARDWARE_H */ diff --git a/arch/arm/include/asm/arch-am33xx/hardware_am33xx.h b/arch/arm/include/asm/arch-am33xx/hardware_am33xx.h index 432f0c7..e4231c8 100644 --- a/arch/arm/include/asm/arch-am33xx/hardware_am33xx.h +++ b/arch/arm/include/asm/arch-am33xx/hardware_am33xx.h @@ -28,19 +28,41 @@ /* PRCM Base Address */ #define PRCM_BASE 0x44E00000 +#define CM_PER 0x44E00000 +#define CM_WKUP 0x44E00400 + +#define PRM_RSTCTRL (PRCM_BASE + 0x0F00) +#define PRM_RSTST (PRM_RSTCTRL + 8) /* VTP Base address */ #define VTP0_CTRL_ADDR 0x44E10E0C +#define VTP1_CTRL_ADDR 0x48140E10 /* DDR Base address */ #define DDR_PHY_CMD_ADDR 0x44E12000 #define DDR_PHY_DATA_ADDR 0x44E120C8 +#define DDR_PHY_CMD_ADDR2 0x47C0C800 +#define DDR_PHY_DATA_ADDR2 0x47C0C8C8 #define DDR_DATA_REGS_NR 2 +#define DDRPHY_0_CONFIG_BASE (CTRL_BASE + 0x1400) +#define DDRPHY_CONFIG_BASE DDRPHY_0_CONFIG_BASE + /* CPSW Config space */ #define CPSW_MDIO_BASE 0x4A101000 /* RTC base address */ #define RTC_BASE 0x44E3E000 +/* OTG */ +#define USB0_OTG_BASE 0x47401000 +#define USB1_OTG_BASE 0x47401800 + +/* LCD Controller */ +#define LCD_CNTL_BASE 0x4830E000 + +/* PWMSS */ +#define PWMSS0_BASE 0x48300000 +#define AM33XX_ECAP0_BASE 0x48300100 + #endif /* __AM33XX_HARDWARE_AM33XX_H */ diff --git a/arch/arm/include/asm/arch-am33xx/hardware_am43xx.h b/arch/arm/include/asm/arch-am33xx/hardware_am43xx.h new file mode 100644 index 0000000..303c594 --- /dev/null +++ b/arch/arm/include/asm/arch-am33xx/hardware_am43xx.h @@ -0,0 +1,54 @@ +/* + * hardware_am43xx.h + * + * AM43xx hardware specific header + * + * Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __AM43XX_HARDWARE_AM43XX_H +#define __AM43XX_HARDWARE_AM43XX_H + +/* Module base addresses */ + +/* UART Base Address */ +#define UART0_BASE 0x44E09000 + +/* GPIO Base address */ +#define GPIO2_BASE 0x481AC000 + +/* Watchdog Timer */ +#define WDT_BASE 0x44E35000 + +/* Control Module Base Address */ +#define CTRL_BASE 0x44E10000 +#define CTRL_DEVICE_BASE 0x44E10600 + +/* PRCM Base Address */ +#define PRCM_BASE 0x44DF0000 +#define CM_WKUP 0x44DF2800 +#define CM_PER 0x44DF8800 + +#define PRM_RSTCTRL (PRCM_BASE + 0x4000) +#define PRM_RSTST (PRM_RSTCTRL + 4) + +/* VTP Base address */ +#define VTP0_CTRL_ADDR 0x44E10E0C +#define VTP1_CTRL_ADDR 0x48140E10 + +/* DDR Base address */ +#define DDR_PHY_CMD_ADDR 0x44E12000 +#define DDR_PHY_DATA_ADDR 0x44E120C8 +#define DDR_PHY_CMD_ADDR2 0x47C0C800 +#define DDR_PHY_DATA_ADDR2 0x47C0C8C8 +#define DDR_DATA_REGS_NR 2 + +/* CPSW Config space */ +#define CPSW_MDIO_BASE 0x4A101000 + +/* RTC base address */ +#define RTC_BASE 0x44E3E000 + +#endif /* __AM43XX_HARDWARE_AM43XX_H */ diff --git a/arch/arm/include/asm/arch-am33xx/hardware_ti814x.h b/arch/arm/include/asm/arch-am33xx/hardware_ti814x.h index 451d935..4509a23 100644 --- a/arch/arm/include/asm/arch-am33xx/hardware_ti814x.h +++ b/arch/arm/include/asm/arch-am33xx/hardware_ti814x.h @@ -25,22 +25,37 @@ /* PRCM Base Address */ #define PRCM_BASE 0x48180000 +#define CM_PER 0x44E00000 +#define CM_WKUP 0x44E00400 + +#define PRM_RSTCTRL (PRCM_BASE + 0x00A0) +#define PRM_RSTST (PRM_RSTCTRL + 8) /* PLL Subsystem Base Address */ #define PLL_SUBSYS_BASE 0x481C5000 /* VTP Base address */ #define VTP0_CTRL_ADDR 0x48140E0C +#define VTP1_CTRL_ADDR 0x48140E10 /* DDR Base address */ #define DDR_PHY_CMD_ADDR 0x47C0C400 #define DDR_PHY_DATA_ADDR 0x47C0C4C8 +#define DDR_PHY_CMD_ADDR2 0x47C0C800 +#define DDR_PHY_DATA_ADDR2 0x47C0C8C8 #define DDR_DATA_REGS_NR 4 +#define DDRPHY_0_CONFIG_BASE (CTRL_BASE + 0x1400) +#define DDRPHY_CONFIG_BASE DDRPHY_0_CONFIG_BASE + /* CPSW Config space */ #define CPSW_MDIO_BASE 0x4A100800 /* RTC base address */ #define RTC_BASE 0x480C0000 +/* OTG */ +#define USB0_OTG_BASE 0x47401000 +#define USB1_OTG_BASE 0x47401800 + #endif /* __AM33XX_HARDWARE_TI814X_H */ diff --git a/arch/arm/include/asm/arch-am33xx/hardware_ti816x.h b/arch/arm/include/asm/arch-am33xx/hardware_ti816x.h new file mode 100644 index 0000000..3c68064 --- /dev/null +++ b/arch/arm/include/asm/arch-am33xx/hardware_ti816x.h @@ -0,0 +1,61 @@ +/* + * hardware_ti816x.h + * + * TI816x hardware specific header + * + * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com> + * Antoine Tenart, <atenart@adeneo-embedded.com> + * Based on TI-PSP-04.00.02.14 + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __AM33XX_HARDWARE_TI816X_H +#define __AM33XX_HARDWARE_TI816X_H + +/* UART */ +#define UART0_BASE 0x48020000 +#define UART1_BASE 0x48022000 +#define UART2_BASE 0x48024000 + +/* Watchdog Timer */ +#define WDT_BASE 0x480C2000 + +/* Control Module Base Address */ +#define CTRL_BASE 0x48140000 + +/* PRCM Base Address */ +#define PRCM_BASE 0x48180000 + +#define PRM_RSTCTRL (PRCM_BASE + 0x00A0) +#define PRM_RSTST (PRM_RSTCTRL + 8) + +/* VTP Base address */ +#define VTP0_CTRL_ADDR 0x48198358 +#define VTP1_CTRL_ADDR 0x4819A358 + +/* DDR Base address */ +#define DDR_PHY_CMD_ADDR 0x48198000 +#define DDR_PHY_DATA_ADDR 0x481980C8 +#define DDR_PHY_CMD_ADDR2 0x4819A000 +#define DDR_PHY_DATA_ADDR2 0x4819A0C8 +#define DDR_DATA_REGS_NR 4 + + +#define DDRPHY_0_CONFIG_BASE 0x48198000 +#define DDRPHY_1_CONFIG_BASE 0x4819A000 +#define DDRPHY_CONFIG_BASE ((emif == 0) ? \ + DDRPHY_0_CONFIG_BASE : DDRPHY_1_CONFIG_BASE) + +/* RTC base address */ +#define RTC_BASE 0x480C0000 + +#endif /* __AM33XX_HARDWARE_TI816X_H */ diff --git a/arch/arm/include/asm/arch-am33xx/mmc_host_def.h b/arch/arm/include/asm/arch-am33xx/mmc_host_def.h index 51ba791..724e252 100644 --- a/arch/arm/include/asm/arch-am33xx/mmc_host_def.h +++ b/arch/arm/include/asm/arch-am33xx/mmc_host_def.h @@ -27,6 +27,9 @@ #if defined(CONFIG_TI814X) #undef MMC_CLOCK_REFERENCE #define MMC_CLOCK_REFERENCE 192 /* MHz */ +#elif defined(CONFIG_TI816X) +#undef MMC_CLOCK_REFERENCE +#define MMC_CLOCK_REFERENCE 48 /* MHz */ #endif #endif /* MMC_HOST_DEF_H */ diff --git a/arch/arm/include/asm/arch-am33xx/mux.h b/arch/arm/include/asm/arch-am33xx/mux.h index 1c6b65f..3249437 100644 --- a/arch/arm/include/asm/arch-am33xx/mux.h +++ b/arch/arm/include/asm/arch-am33xx/mux.h @@ -23,6 +23,10 @@ #include <asm/arch/mux_am33xx.h> #elif defined(CONFIG_TI814X) #include <asm/arch/mux_ti814x.h> +#elif defined(CONFIG_TI816X) +#include <asm/arch/mux_ti816x.h> +#elif defined(CONFIG_AM43XX) +#include <asm/arch/mux_am43xx.h> #endif struct module_pin_mux { diff --git a/arch/arm/include/asm/arch-am33xx/mux_am43xx.h b/arch/arm/include/asm/arch-am33xx/mux_am43xx.h new file mode 100644 index 0000000..0206912 --- /dev/null +++ b/arch/arm/include/asm/arch-am33xx/mux_am43xx.h @@ -0,0 +1,142 @@ +/* + * mux_am43xx.h + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _MUX_AM43XX_H_ +#define _MUX_AM43XX_H_ + +#include <common.h> +#include <asm/io.h> + +#define MUX_CFG(value, offset) \ + __raw_writel(value, (CTRL_BASE + offset)); + +/* PAD Control Fields */ +#define SLEWCTRL (0x1 << 19) +#define RXACTIVE (0x1 << 18) +#define PULLDOWN_EN (0x0 << 17) /* Pull Down Selection */ +#define PULLUP_EN (0x1 << 17) /* Pull Up Selection */ +#define PULLUDEN (0x0 << 16) /* Pull up/down enable */ +#define PULLUDDIS (0x1 << 16) /* Pull up/down disable */ +#define MODE(val) val /* used for Readability */ + +/* + * PAD CONTROL OFFSETS + * Field names corresponds to the pad signal name + */ +struct pad_signals { + int gpmc_ad0; + int gpmc_ad1; + int gpmc_ad2; + int gpmc_ad3; + int gpmc_ad4; + int gpmc_ad5; + int gpmc_ad6; + int gpmc_ad7; + int gpmc_ad8; + int gpmc_ad9; + int gpmc_ad10; + int gpmc_ad11; + int gpmc_ad12; + int gpmc_ad13; + int gpmc_ad14; + int gpmc_ad15; + int gpmc_a0; + int gpmc_a1; + int gpmc_a2; + int gpmc_a3; + int gpmc_a4; + int gpmc_a5; + int gpmc_a6; + int gpmc_a7; + int gpmc_a8; + int gpmc_a9; + int gpmc_a10; + int gpmc_a11; + int gpmc_wait0; + int gpmc_wpn; + int gpmc_be1n; + int gpmc_csn0; + int gpmc_csn1; + int gpmc_csn2; + int gpmc_csn3; + int gpmc_clk; + int gpmc_advn_ale; + int gpmc_oen_ren; + int gpmc_wen; + int gpmc_be0n_cle; + int lcd_data0; + int lcd_data1; + int lcd_data2; + int lcd_data3; + int lcd_data4; + int lcd_data5; + int lcd_data6; + int lcd_data7; + int lcd_data8; + int lcd_data9; + int lcd_data10; + int lcd_data11; + int lcd_data12; + int lcd_data13; + int lcd_data14; + int lcd_data15; + int lcd_vsync; + int lcd_hsync; + int lcd_pclk; + int lcd_ac_bias_en; + int mmc0_dat3; + int mmc0_dat2; + int mmc0_dat1; + int mmc0_dat0; + int mmc0_clk; + int mmc0_cmd; + int mii1_col; + int mii1_crs; + int mii1_rxerr; + int mii1_txen; + int mii1_rxdv; + int mii1_txd3; + int mii1_txd2; + int mii1_txd1; + int mii1_txd0; + int mii1_txclk; + int mii1_rxclk; + int mii1_rxd3; + int mii1_rxd2; + int mii1_rxd1; + int mii1_rxd0; + int rmii1_refclk; + int mdio_data; + int mdio_clk; + int spi0_sclk; + int spi0_d0; + int spi0_d1; + int spi0_cs0; + int spi0_cs1; + int ecap0_in_pwm0_out; + int uart0_ctsn; + int uart0_rtsn; + int uart0_rxd; + int uart0_txd; + int uart1_ctsn; + int uart1_rtsn; + int uart1_rxd; + int uart1_txd; + int i2c0_sda; + int i2c0_scl; + int mcasp0_aclkx; + int mcasp0_fsx; + int mcasp0_axr0; + int mcasp0_ahclkr; + int mcasp0_aclkr; + int mcasp0_fsr; + int mcasp0_axr1; + int mcasp0_ahclkx; +}; + +#endif /* _MUX_AM43XX_H_ */ diff --git a/arch/arm/include/asm/arch-am33xx/mux_ti816x.h b/arch/arm/include/asm/arch-am33xx/mux_ti816x.h new file mode 100644 index 0000000..e4e5a48 --- /dev/null +++ b/arch/arm/include/asm/arch-am33xx/mux_ti816x.h @@ -0,0 +1,363 @@ +/* + * mux_ti816x.h + * + * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com> + * Antoine Tenart, <atenart@adeneo-embedded.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _MUX_TI816X_H_ +#define _MUX_TI816X_H_ + +#include <common.h> +#include <asm/io.h> + +#define MUX_CFG(value, offset) \ + __raw_writel(value, (CTRL_BASE + offset)); + +#define PULLDOWN_EN (0x0 << 4) /* Pull Down Selection */ +#define PULLUP_EN (0x1 << 4) /* Pull Up Selection */ +#define PULLUDEN (0x0 << 3) /* Pull up enabled */ +#define PULLUDDIS (0x1 << 3) /* Pull up disabled */ +#define MODE(val) (val) /* used for Readability */ + + +/* + * PAD CONTROL OFFSETS + * Field names corresponds to the pad signal name + */ +struct pad_signals { + int pincntl1; + int pincntl2; + int pincntl3; + int pincntl4; + int pincntl5; + int pincntl6; + int pincntl7; + int pincntl8; + int pincntl9; + int pincntl10; + int pincntl11; + int pincntl12; + int pincntl13; + int pincntl14; + int pincntl15; + int pincntl16; + int pincntl17; + int pincntl18; + int pincntl19; + int pincntl20; + int pincntl21; + int pincntl22; + int pincntl23; + int pincntl24; + int pincntl25; + int pincntl26; + int pincntl27; + int pincntl28; + int pincntl29; + int pincntl30; + int pincntl31; + int pincntl32; + int pincntl33; + int pincntl34; + int pincntl35; + int pincntl36; + int pincntl37; + int pincntl38; + int pincntl39; + int pincntl40; + int pincntl41; + int pincntl42; + int pincntl43; + int pincntl44; + int pincntl45; + int pincntl46; + int pincntl47; + int pincntl48; + int pincntl49; + int pincntl50; + int pincntl51; + int pincntl52; + int pincntl53; + int pincntl54; + int pincntl55; + int pincntl56; + int pincntl57; + int pincntl58; + int pincntl59; + int pincntl60; + int pincntl61; + int pincntl62; + int pincntl63; + int pincntl64; + int pincntl65; + int pincntl66; + int pincntl67; + int pincntl68; + int pincntl69; + int pincntl70; + int pincntl71; + int pincntl72; + int pincntl73; + int pincntl74; + int pincntl75; + int pincntl76; + int pincntl77; + int pincntl78; + int pincntl79; + int pincntl80; + int pincntl81; + int pincntl82; + int pincntl83; + int pincntl84; + int pincntl85; + int pincntl86; + int pincntl87; + int pincntl88; + int pincntl89; + int pincntl90; + int pincntl91; + int pincntl92; + int pincntl93; + int pincntl94; + int pincntl95; + int pincntl96; + int pincntl97; + int pincntl98; + int pincntl99; + int pincntl100; + int pincntl101; + int pincntl102; + int pincntl103; + int pincntl104; + int pincntl105; + int pincntl106; + int pincntl107; + int pincntl108; + int pincntl109; + int pincntl110; + int pincntl111; + int pincntl112; + int pincntl113; + int pincntl114; + int pincntl115; + int pincntl116; + int pincntl117; + int pincntl118; + int pincntl119; + int pincntl120; + int pincntl121; + int pincntl122; + int pincntl123; + int pincntl124; + int pincntl125; + int pincntl126; + int pincntl127; + int pincntl128; + int pincntl129; + int pincntl130; + int pincntl131; + int pincntl132; + int pincntl133; + int pincntl134; + int pincntl135; + int pincntl136; + int pincntl137; + int pincntl138; + int pincntl139; + int pincntl140; + int pincntl141; + int pincntl142; + int pincntl143; + int pincntl144; + int pincntl145; + int pincntl146; + int pincntl147; + int pincntl148; + int pincntl149; + int pincntl150; + int pincntl151; + int pincntl152; + int pincntl153; + int pincntl154; + int pincntl155; + int pincntl156; + int pincntl157; + int pincntl158; + int pincntl159; + int pincntl160; + int pincntl161; + int pincntl162; + int pincntl163; + int pincntl164; + int pincntl165; + int pincntl166; + int pincntl167; + int pincntl168; + int pincntl169; + int pincntl170; + int pincntl171; + int pincntl172; + int pincntl173; + int pincntl174; + int pincntl175; + int pincntl176; + int pincntl177; + int pincntl178; + int pincntl179; + int pincntl180; + int pincntl181; + int pincntl182; + int pincntl183; + int pincntl184; + int pincntl185; + int pincntl186; + int pincntl187; + int pincntl188; + int pincntl189; + int pincntl190; + int pincntl191; + int pincntl192; + int pincntl193; + int pincntl194; + int pincntl195; + int pincntl196; + int pincntl197; + int pincntl198; + int pincntl199; + int pincntl200; + int pincntl201; + int pincntl202; + int pincntl203; + int pincntl204; + int pincntl205; + int pincntl206; + int pincntl207; + int pincntl208; + int pincntl209; + int pincntl210; + int pincntl211; + int pincntl212; + int pincntl213; + int pincntl214; + int pincntl215; + int pincntl216; + int pincntl217; + int pincntl218; + int pincntl219; + int pincntl220; + int pincntl221; + int pincntl222; + int pincntl223; + int pincntl224; + int pincntl225; + int pincntl226; + int pincntl227; + int pincntl228; + int pincntl229; + int pincntl230; + int pincntl231; + int pincntl232; + int pincntl233; + int pincntl234; + int pincntl235; + int pincntl236; + int pincntl237; + int pincntl238; + int pincntl239; + int pincntl240; + int pincntl241; + int pincntl242; + int pincntl243; + int pincntl244; + int pincntl245; + int pincntl246; + int pincntl247; + int pincntl248; + int pincntl249; + int pincntl250; + int pincntl251; + int pincntl252; + int pincntl253; + int pincntl254; + int pincntl255; + int pincntl256; + int pincntl257; + int pincntl258; + int pincntl259; + int pincntl260; + int pincntl261; + int pincntl262; + int pincntl263; + int pincntl264; + int pincntl265; + int pincntl266; + int pincntl267; + int pincntl268; + int pincntl269; + int pincntl270; + int pincntl271; + int pincntl272; + int pincntl273; + int pincntl274; + int pincntl275; + int pincntl276; + int pincntl277; + int pincntl278; + int pincntl279; + int pincntl280; + int pincntl281; + int pincntl282; + int pincntl283; + int pincntl284; + int pincntl285; + int pincntl286; + int pincntl287; + int pincntl288; + int pincntl289; + int pincntl290; + int pincntl291; + int pincntl292; + int pincntl293; + int pincntl294; + int pincntl295; + int pincntl296; + int pincntl297; + int pincntl298; + int pincntl299; + int pincntl300; + int pincntl301; + int pincntl302; + int pincntl303; + int pincntl304; + int pincntl305; + int pincntl306; + int pincntl307; + int pincntl308; + int pincntl309; + int pincntl310; + int pincntl311; + int pincntl312; + int pincntl313; + int pincntl314; + int pincntl315; + int pincntl316; + int pincntl317; + int pincntl318; + int pincntl319; + int pincntl320; + int pincntl321; + int pincntl322; + int pincntl323; +}; + +#endif /* endif _MUX_TI816X_H_ */ diff --git a/arch/arm/include/asm/arch-am33xx/omap.h b/arch/arm/include/asm/arch-am33xx/omap.h index 66c61e5..2250721 100644 --- a/arch/arm/include/asm/arch-am33xx/omap.h +++ b/arch/arm/include/asm/arch-am33xx/omap.h @@ -15,18 +15,17 @@ #ifndef _OMAP_H_ #define _OMAP_H_ -/* - * Non-secure SRAM Addresses - * Non-secure RAM starts at 0x40300000 for GP devices. But we keep SRAM_BASE - * at 0x40304000(EMU base) so that our code works for both EMU and GP - */ #ifdef CONFIG_AM33XX #define NON_SECURE_SRAM_START 0x402F0400 #define NON_SECURE_SRAM_END 0x40310000 -#define SRAM_SCRATCH_SPACE_ADDR 0x4030C000 -#elif defined(CONFIG_TI814X) +#define SRAM_SCRATCH_SPACE_ADDR 0x4030B800 +#elif defined(CONFIG_TI81XX) #define NON_SECURE_SRAM_START 0x40300000 #define NON_SECURE_SRAM_END 0x40320000 #define SRAM_SCRATCH_SPACE_ADDR 0x4031B800 +#elif defined(CONFIG_AM43XX) +#define NON_SECURE_SRAM_START 0x402F0400 +#define NON_SECURE_SRAM_END 0x40340000 +#define SRAM_SCRATCH_SPACE_ADDR 0x4033C000 #endif #endif diff --git a/arch/arm/include/asm/arch-am33xx/spl.h b/arch/arm/include/asm/arch-am33xx/spl.h index e428512..95de9aa 100644 --- a/arch/arm/include/asm/arch-am33xx/spl.h +++ b/arch/arm/include/asm/arch-am33xx/spl.h @@ -7,9 +7,17 @@ #ifndef _ASM_ARCH_SPL_H_ #define _ASM_SPL_H_ +#if defined(CONFIG_TI816X) +#define BOOT_DEVICE_XIP 2 +#define BOOT_DEVICE_NAND 3 +#define BOOT_DEVICE_MMC1 6 +#define BOOT_DEVICE_MMC2 5 +#define BOOT_DEVICE_UART 0x43 +#define BOOT_DEVICE_MMC2_2 0xFF +#else #define BOOT_DEVICE_XIP 2 #define BOOT_DEVICE_NAND 5 -#ifdef CONFIG_AM33XX +#if defined(CONFIG_AM33XX) || defined(CONFIG_AM43XX) #define BOOT_DEVICE_MMC1 8 #define BOOT_DEVICE_MMC2 9 /* eMMC or daughter card */ #elif defined(CONFIG_TI814X) @@ -21,11 +29,12 @@ #define BOOT_DEVICE_USBETH 68 #define BOOT_DEVICE_CPGMAC 70 #define BOOT_DEVICE_MMC2_2 0xFF +#endif -#ifdef CONFIG_AM33XX +#if defined(CONFIG_AM33XX) || defined(CONFIG_AM43XX) #define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC1 #define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC2 -#elif defined(CONFIG_TI814X) +#elif defined(CONFIG_TI81XX) #define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC2 #define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC1 #endif diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h b/arch/arm/include/asm/arch-am33xx/sys_proto.h index 1424f90..c6070a3 100644 --- a/arch/arm/include/asm/arch-am33xx/sys_proto.h +++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h @@ -35,6 +35,11 @@ void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base, u32 size); void omap_nand_switch_ecc(uint32_t, uint32_t); -void rtc32k_enable(void); -void uart_soft_reset(void); +void set_uart_mux_conf(void); +void set_mux_conf_regs(void); +void sdram_init(void); +u32 wait_on_value(u32, u32, void *, u32); +#ifdef CONFIG_NOR_BOOT +void enable_norboot_pin_mux(void); +#endif #endif diff --git a/arch/arm/include/asm/arch-at91/at91_common.h b/arch/arm/include/asm/arch-at91/at91_common.h index d659702..9f54fdd 100644 --- a/arch/arm/include/asm/arch-at91/at91_common.h +++ b/arch/arm/include/asm/arch-at91/at91_common.h @@ -10,6 +10,7 @@ #define AT91_COMMON_H void at91_can_hw_init(void); +void at91_gmac_hw_init(void); void at91_macb_hw_init(void); void at91_mci_hw_init(void); void at91_serial0_hw_init(void); diff --git a/arch/arm/include/asm/arch-at91/at91sam9x5.h b/arch/arm/include/asm/arch-at91/at91sam9x5.h index fcc6fdc..a471038 100644 --- a/arch/arm/include/asm/arch-at91/at91sam9x5.h +++ b/arch/arm/include/asm/arch-at91/at91sam9x5.h @@ -162,6 +162,12 @@ #define ATMEL_ID_UHP ATMEL_ID_UHPHS /* + * PMECC table in ROM + */ +#define ATMEL_PMECC_INDEX_OFFSET_512 0x8000 +#define ATMEL_PMECC_INDEX_OFFSET_1024 0x10000 + +/* * at91sam9x5 specific prototypes */ #ifndef __ASSEMBLY__ diff --git a/arch/arm/include/asm/arch-at91/sama5d3.h b/arch/arm/include/asm/arch-at91/sama5d3.h index 49bd335..fefee5e 100644 --- a/arch/arm/include/asm/arch-at91/sama5d3.h +++ b/arch/arm/include/asm/arch-at91/sama5d3.h @@ -191,8 +191,6 @@ */ #define ATMEL_PMECC_INDEX_OFFSET_512 0x10000 #define ATMEL_PMECC_INDEX_OFFSET_1024 0x18000 -#define ATMEL_PMECC_ALPHA_OFFSET_512 0x10000 -#define ATMEL_PMECC_ALPHA_OFFSET_1024 0x18000 /* * SAMA5D3 specific prototypes diff --git a/arch/arm/include/asm/arch-at91/sama5d3_smc.h b/arch/arm/include/asm/arch-at91/sama5d3_smc.h index c060894..6caa9b6 100644 --- a/arch/arm/include/asm/arch-at91/sama5d3_smc.h +++ b/arch/arm/include/asm/arch-at91/sama5d3_smc.h @@ -17,7 +17,6 @@ #define AT91_ASM_SMC_MODE0 (ATMEL_BASE_SMC + 0x60C) #else struct at91_cs { - u32 reserved[96]; u32 setup; /* 0x600 SMC Setup Register */ u32 pulse; /* 0x604 SMC Pulse Register */ u32 cycle; /* 0x608 SMC Cycle Register */ @@ -26,6 +25,7 @@ struct at91_cs { }; struct at91_smc { + u32 reserved[384]; struct at91_cs cs[4]; }; #endif /* __ASSEMBLY__ */ diff --git a/arch/arm/include/asm/arch-davinci/pinmux_defs.h b/arch/arm/include/asm/arch-davinci/pinmux_defs.h index 4d45799..2d82af5 100644 --- a/arch/arm/include/asm/arch-davinci/pinmux_defs.h +++ b/arch/arm/include/asm/arch-davinci/pinmux_defs.h @@ -23,12 +23,13 @@ extern const struct pinmux_config spi1_pins_scs0[1]; /* UART pin muxer settings */ extern const struct pinmux_config uart0_pins_txrx[2]; +extern const struct pinmux_config uart0_pins_rtscts[2]; extern const struct pinmux_config uart1_pins_txrx[2]; extern const struct pinmux_config uart2_pins_txrx[2]; extern const struct pinmux_config uart2_pins_rtscts[2]; /* EMAC pin muxer settings*/ -extern const struct pinmux_config emac_pins_rmii[7]; +extern const struct pinmux_config emac_pins_rmii[8]; extern const struct pinmux_config emac_pins_rmii_clk_source[1]; extern const struct pinmux_config emac_pins_mii[15]; extern const struct pinmux_config emac_pins_mdio[2]; diff --git a/arch/arm/include/asm/arch-exynos/mipi_dsim.h b/arch/arm/include/asm/arch-exynos/mipi_dsim.h index 8916d9d..498a9ff 100644 --- a/arch/arm/include/asm/arch-exynos/mipi_dsim.h +++ b/arch/arm/include/asm/arch-exynos/mipi_dsim.h @@ -291,7 +291,7 @@ struct exynos_platform_mipi_dsim { */ struct mipi_dsim_master_ops { int (*cmd_write)(struct mipi_dsim_device *dsim, unsigned int data_id, - unsigned int data0, unsigned int data1); + const unsigned char *data0, unsigned int data1); int (*cmd_read)(struct mipi_dsim_device *dsim, unsigned int data_id, unsigned int data0, unsigned int data1); int (*get_dsim_frame_done)(struct mipi_dsim_device *dsim); diff --git a/arch/arm/include/asm/arch-mx5/clock.h b/arch/arm/include/asm/arch-mx5/clock.h index 406d150..9ee79ae 100644 --- a/arch/arm/include/asm/arch-mx5/clock.h +++ b/arch/arm/include/asm/arch-mx5/clock.h @@ -46,10 +46,10 @@ u32 imx_get_fecclk(void); unsigned int mxc_get_clock(enum mxc_clock clk); int mxc_set_clock(u32 ref, u32 freq, u32 clk_type); void set_usb_phy_clk(void); -void enable_usb_phy1_clk(unsigned char enable); -void enable_usb_phy2_clk(unsigned char enable); +void enable_usb_phy1_clk(bool enable); +void enable_usb_phy2_clk(bool enable); void set_usboh3_clk(void); -void enable_usboh3_clk(unsigned char enable); +void enable_usboh3_clk(bool enable); void mxc_set_sata_internal_clock(void); int enable_i2c_clk(unsigned char enable, unsigned i2c_num); void enable_nfc_clk(unsigned char enable); diff --git a/arch/arm/include/asm/arch-omap3/clock.h b/arch/arm/include/asm/arch-omap3/clock.h index da776cf..be669c1 100644 --- a/arch/arm/include/asm/arch-omap3/clock.h +++ b/arch/arm/include/asm/arch-omap3/clock.h @@ -61,7 +61,6 @@ extern dpll_param *get_36x_mpu_dpll_param(void); extern dpll_param *get_36x_iva_dpll_param(void); extern dpll_param *get_36x_core_dpll_param(void); extern dpll_param *get_36x_per_dpll_param(void); - -extern void *_end_vect, *_start; +extern dpll_param *get_36x_per2_dpll_param(void); #endif diff --git a/arch/arm/include/asm/arch-omap3/clocks_omap3.h b/arch/arm/include/asm/arch-omap3/clocks_omap3.h index bf7fa00..df73c4b 100644 --- a/arch/arm/include/asm/arch-omap3/clocks_omap3.h +++ b/arch/arm/include/asm/arch-omap3/clocks_omap3.h @@ -323,4 +323,26 @@ #define PER_36XX_FSEL_38P4 0x07 #define PER_36XX_M2_38P4 0x09 +/* 36XX PER2 DPLL */ + +#define PER2_36XX_M_12 0x50 +#define PER2_36XX_N_12 0x00 +#define PER2_36XX_M2_12 0x08 + +#define PER2_36XX_M_13 0x1BB +#define PER2_36XX_N_13 0x05 +#define PER2_36XX_M2_13 0x08 + +#define PER2_36XX_M_19P2 0x32 +#define PER2_36XX_N_19P2 0x00 +#define PER2_36XX_M2_19P2 0x08 + +#define PER2_36XX_M_26 0x1BB +#define PER2_36XX_N_26 0x0B +#define PER2_36XX_M2_26 0x08 + +#define PER2_36XX_M_38P4 0x19 +#define PER2_36XX_N_38P4 0x00 +#define PER2_36XX_M2_38P4 0x08 + #endif /* endif _CLOCKS_OMAP3_H_ */ diff --git a/arch/arm/include/asm/arch-omap3/gpio.h b/arch/arm/include/asm/arch-omap3/gpio.h index d72f5e5..f664c11 100644 --- a/arch/arm/include/asm/arch-omap3/gpio.h +++ b/arch/arm/include/asm/arch-omap3/gpio.h @@ -2,20 +2,7 @@ * Copyright (c) 2009 Wind River Systems, Inc. * Tom Rix <Tom.Rix@windriver.com> * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0 * * This work is derived from the linux 2.6.27 kernel source * To fetch, use the kernel repository @@ -30,10 +17,6 @@ * * Copyright (C) 2003-2005 Nokia Corporation * Written by Juha Yrjölä <juha.yrjola@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef _GPIO_OMAP3_H #define _GPIO_OMAP3_H diff --git a/arch/arm/include/asm/arch-omap4/clock.h b/arch/arm/include/asm/arch-omap4/clock.h index b2e03d6..f3a682a 100644 --- a/arch/arm/include/asm/arch-omap4/clock.h +++ b/arch/arm/include/asm/arch-omap4/clock.h @@ -149,11 +149,16 @@ /* PRM_VC_VAL_BYPASS */ #define PRM_VC_I2C_CHANNEL_FREQ_KHZ 400 -/* SMPS */ +/* PMIC */ #define SMPS_I2C_SLAVE_ADDR 0x12 +/* TWL6030 SMPS */ #define SMPS_REG_ADDR_VCORE1 0x55 #define SMPS_REG_ADDR_VCORE2 0x5B #define SMPS_REG_ADDR_VCORE3 0x61 +/* TWL6032 SMPS */ +#define SMPS_REG_ADDR_SMPS1 0x55 +#define SMPS_REG_ADDR_SMPS2 0x5B +#define SMPS_REG_ADDR_SMPS5 0x49 #define PHOENIX_SMPS_BASE_VOLT_STD_MODE_UV 607700 #define PHOENIX_SMPS_BASE_VOLT_STD_MODE_WITH_OFFSET_UV 709000 diff --git a/arch/arm/include/asm/arch-omap4/gpio.h b/arch/arm/include/asm/arch-omap4/gpio.h index fdf65ed..72ba1d7 100644 --- a/arch/arm/include/asm/arch-omap4/gpio.h +++ b/arch/arm/include/asm/arch-omap4/gpio.h @@ -2,20 +2,7 @@ * Copyright (c) 2009 Wind River Systems, Inc. * Tom Rix <Tom.Rix@windriver.com> * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0 * * This work is derived from the linux 2.6.27 kernel source * To fetch, use the kernel repository @@ -30,10 +17,6 @@ * * Copyright (C) 2003-2005 Nokia Corporation * Written by Juha Yrjölä <juha.yrjola@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef _GPIO_OMAP4_H #define _GPIO_OMAP4_H diff --git a/arch/arm/include/asm/arch-omap4/omap.h b/arch/arm/include/asm/arch-omap4/omap.h index 3823a37..9129c0d 100644 --- a/arch/arm/include/asm/arch-omap4/omap.h +++ b/arch/arm/include/asm/arch-omap4/omap.h @@ -41,6 +41,7 @@ #define OMAP4_CONTROL_ID_CODE_ES2_3 0x6B95C02F #define OMAP4460_CONTROL_ID_CODE_ES1_0 0x0B94E02F #define OMAP4460_CONTROL_ID_CODE_ES1_1 0x2B94E02F +#define OMAP4470_CONTROL_ID_CODE_ES1_0 0x0B97502F /* UART */ #define UART1_BASE (OMAP44XX_L4_PER_BASE + 0x6a000) diff --git a/arch/arm/include/asm/arch-omap5/clock.h b/arch/arm/include/asm/arch-omap5/clock.h index 3adfc09..9a2166c 100644 --- a/arch/arm/include/asm/arch-omap5/clock.h +++ b/arch/arm/include/asm/arch-omap5/clock.h @@ -149,6 +149,23 @@ /* CM_L3INIT_USBPHY_CLKCTRL */ #define USBPHY_CLKCTRL_OPTFCLKEN_PHY_48M_MASK 8 +/* CM_L3INIT_USB_HOST_HS_CLKCTRL */ +#define OPTFCLKEN_FUNC48M_CLK (1 << 15) +#define OPTFCLKEN_HSIC480M_P2_CLK (1 << 14) +#define OPTFCLKEN_HSIC480M_P1_CLK (1 << 13) +#define OPTFCLKEN_HSIC60M_P2_CLK (1 << 12) +#define OPTFCLKEN_HSIC60M_P1_CLK (1 << 11) +#define OPTFCLKEN_UTMI_P3_CLK (1 << 10) +#define OPTFCLKEN_UTMI_P2_CLK (1 << 9) +#define OPTFCLKEN_UTMI_P1_CLK (1 << 8) +#define OPTFCLKEN_HSIC480M_P3_CLK (1 << 7) +#define OPTFCLKEN_HSIC60M_P3_CLK (1 << 6) + +/* CM_L3INIT_USB_TLL_HS_CLKCTRL */ +#define OPTFCLKEN_USB_CH0_CLK_ENABLE (1 << 8) +#define OPTFCLKEN_USB_CH1_CLK_ENABLE (1 << 9) +#define OPTFCLKEN_USB_CH2_CLK_ENABLE (1 << 10) + /* CM_MPU_MPU_CLKCTRL */ #define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_SHIFT 24 #define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK (3 << 24) diff --git a/arch/arm/include/asm/arch-omap5/ehci.h b/arch/arm/include/asm/arch-omap5/ehci.h new file mode 100644 index 0000000..3921e4a --- /dev/null +++ b/arch/arm/include/asm/arch-omap5/ehci.h @@ -0,0 +1,43 @@ +/* + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com* + * Author: Govindraj R <govindraj.raja@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _EHCI_H +#define _EHCI_H + +#define OMAP_EHCI_BASE (OMAP54XX_L4_CORE_BASE + 0x64C00) +#define OMAP_UHH_BASE (OMAP54XX_L4_CORE_BASE + 0x64000) +#define OMAP_USBTLL_BASE (OMAP54XX_L4_CORE_BASE + 0x62000) + +/* TLL Register Set */ +#define OMAP_USBTLL_SYSCONFIG_SIDLEMODE (1 << 3) +#define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP (1 << 2) +#define OMAP_USBTLL_SYSCONFIG_SOFTRESET (1 << 1) +#define OMAP_USBTLL_SYSCONFIG_CACTIVITY (1 << 8) +#define OMAP_USBTLL_SYSSTATUS_RESETDONE 1 + +#define OMAP_UHH_SYSCONFIG_SOFTRESET 1 +#define OMAP_UHH_SYSSTATUS_EHCI_RESETDONE (1 << 2) +#define OMAP_UHH_SYSCONFIG_NOIDLE (1 << 2) +#define OMAP_UHH_SYSCONFIG_NOSTDBY (1 << 4) + +#define OMAP_UHH_SYSCONFIG_VAL (OMAP_UHH_SYSCONFIG_NOIDLE | \ + OMAP_UHH_SYSCONFIG_NOSTDBY) + +#endif /* _EHCI_H */ diff --git a/arch/arm/include/asm/arch-omap5/gpio.h b/arch/arm/include/asm/arch-omap5/gpio.h index 7c82f90..9dd03c9 100644 --- a/arch/arm/include/asm/arch-omap5/gpio.h +++ b/arch/arm/include/asm/arch-omap5/gpio.h @@ -2,20 +2,7 @@ * Copyright (c) 2009 Wind River Systems, Inc. * Tom Rix <Tom.Rix@windriver.com> * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0 * * This work is derived from the linux 2.6.27 kernel source * To fetch, use the kernel repository @@ -30,10 +17,6 @@ * * Copyright (C) 2003-2005 Nokia Corporation * Written by Juha Yrjölä <juha.yrjola@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef _GPIO_OMAP5_H #define _GPIO_OMAP5_H diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h index 597c692..e9a51d3 100644 --- a/arch/arm/include/asm/arch-omap5/omap.h +++ b/arch/arm/include/asm/arch-omap5/omap.h @@ -153,6 +153,15 @@ struct s32ktimer { #define EFUSE_4 0x45145100 #endif /* __ASSEMBLY__ */ +/* + * In all cases, the TRM defines the RAM Memory Map for the processor + * and indicates the area for the downloaded image. We use all of that + * space for download and once up and running may use other parts of the + * map for our needs. We set a scratch space that is at the end of the + * OMAP5 download area, but within the DRA7xx download area (as it is + * much larger) and do not, at this time, make use of the additional + * space. + */ #ifdef CONFIG_DRA7XX #define NON_SECURE_SRAM_START 0x40300000 #define NON_SECURE_SRAM_END 0x40380000 /* Not inclusive */ @@ -160,7 +169,7 @@ struct s32ktimer { #define NON_SECURE_SRAM_START 0x40300000 #define NON_SECURE_SRAM_END 0x40320000 /* Not inclusive */ #endif -#define SRAM_SCRATCH_SPACE_ADDR NON_SECURE_SRAM_START +#define SRAM_SCRATCH_SPACE_ADDR 0x4031E000 /* base address for indirect vectors (internal boot mode) */ #define SRAM_ROM_VECT_BASE 0x4031F000 diff --git a/arch/arm/include/asm/arch-zynq/hardware.h b/arch/arm/include/asm/arch-zynq/hardware.h index 25f0e3d..cd69677 100644 --- a/arch/arm/include/asm/arch-zynq/hardware.h +++ b/arch/arm/include/asm/arch-zynq/hardware.h @@ -17,6 +17,9 @@ #define ZYNQ_SDHCI_BASEADDR1 0xE0101000 #define ZYNQ_I2C_BASEADDR0 0xE0004000 #define ZYNQ_I2C_BASEADDR1 0xE0005000 +#define ZYNQ_SPI_BASEADDR0 0xE0006000 +#define ZYNQ_SPI_BASEADDR1 0xE0007000 +#define ZYNQ_DDRC_BASEADDR 0xF8006000 /* Reflect slcr offsets */ struct slcr_regs { @@ -84,4 +87,11 @@ struct scu_regs { #define scu_base ((struct scu_regs *)ZYNQ_SCU_BASEADDR) +struct ddrc_regs { + u32 ddrc_ctrl; /* 0x0 */ + u32 reserved[60]; + u32 ecc_scrub; /* 0xF4 */ +}; +#define ddrc_base ((struct ddrc_regs *)ZYNQ_DDRC_BASEADDR) + #endif /* _ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/include/asm/arch-zynq/sys_proto.h b/arch/arm/include/asm/arch-zynq/sys_proto.h index 19a4eec..110de90 100644 --- a/arch/arm/include/asm/arch-zynq/sys_proto.h +++ b/arch/arm/include/asm/arch-zynq/sys_proto.h @@ -14,6 +14,7 @@ extern void zynq_slcr_gem_clk_setup(u32 gem_id, u32 rclk, u32 clk); extern void zynq_slcr_devcfg_disable(void); extern void zynq_slcr_devcfg_enable(void); extern u32 zynq_slcr_get_idcode(void); +extern void zynq_ddrc_init(void); /* Driver extern functions */ extern int zynq_sdhci_init(u32 regbase); diff --git a/arch/arm/include/asm/ehci-omap.h b/arch/arm/include/asm/ehci-omap.h index 77e8170..ac83a53 100644 --- a/arch/arm/include/asm/ehci-omap.h +++ b/arch/arm/include/asm/ehci-omap.h @@ -42,6 +42,7 @@ enum usbhs_omap_port_mode { /* Values of UHH_REVISION - Note: these are not given in the TRM */ #define OMAP_USBHS_REV1 0x00000010 /* OMAP3 */ #define OMAP_USBHS_REV2 0x50700100 /* OMAP4 */ +#define OMAP_USBHS_REV2_1 0x50700101 /* OMAP5 */ /* UHH Register Set */ #define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN (1 << 2) @@ -60,6 +61,7 @@ enum usbhs_omap_port_mode { #define OMAP_P2_MODE_CLEAR (3 << 18) #define OMAP_P2_MODE_TLL (1 << 18) #define OMAP_P2_MODE_HSIC (3 << 18) +#define OMAP_P3_MODE_CLEAR (3 << 20) #define OMAP_P3_MODE_HSIC (3 << 20) /* EHCI Register Set */ diff --git a/arch/arm/include/asm/imx-common/dma.h b/arch/arm/include/asm/imx-common/dma.h index 5f516ef..d5c1f7f 100644 --- a/arch/arm/include/asm/imx-common/dma.h +++ b/arch/arm/include/asm/imx-common/dma.h @@ -161,4 +161,6 @@ void mxs_dma_init(void); int mxs_dma_init_channel(int chan); int mxs_dma_release(int chan); +void mxs_dma_circ_start(int chan, struct mxs_dma_desc *pdesc); + #endif /* __DMA_H__ */ diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h index 66f416f..5e2f027 100644 --- a/arch/arm/include/asm/omap_common.h +++ b/arch/arm/include/asm/omap_common.h @@ -622,6 +622,7 @@ static inline u8 is_omap54xx(void) #define OMAP4430_ES2_3 0x44300230 #define OMAP4460_ES1_0 0x44600100 #define OMAP4460_ES1_1 0x44600110 +#define OMAP4470_ES1_0 0x44700100 /* omap5 */ #define OMAP5430_SILICON_ID_INVALID 0 diff --git a/arch/arm/include/asm/omap_gpio.h b/arch/arm/include/asm/omap_gpio.h index 1ebfa86..5d25d04 100644 --- a/arch/arm/include/asm/omap_gpio.h +++ b/arch/arm/include/asm/omap_gpio.h @@ -2,20 +2,7 @@ * Copyright (c) 2009 Wind River Systems, Inc. * Tom Rix <Tom.Rix@windriver.com> * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0 * * This work is derived from the linux 2.6.27 kernel source * To fetch, use the kernel repository @@ -30,10 +17,6 @@ * * Copyright (C) 2003-2005 Nokia Corporation * Written by Juha Yrjölä <juha.yrjola@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef _GPIO_H #define _GPIO_H diff --git a/arch/arm/lib/spl.c b/arch/arm/lib/spl.c index 583bdb3..26d0be4 100644 --- a/arch/arm/lib/spl.c +++ b/arch/arm/lib/spl.c @@ -45,12 +45,17 @@ void __weak board_init_f(ulong dummy) #ifdef CONFIG_SPL_OS_BOOT void __noreturn jump_to_image_linux(void *arg) { + unsigned long machid = 0xffffffff; +#ifdef CONFIG_MACH_TYPE + machid = CONFIG_MACH_TYPE; +#endif + debug("Entering kernel arg pointer: 0x%p\n", arg); typedef void (*image_entry_arg_t)(int, int, void *) __attribute__ ((noreturn)); image_entry_arg_t image_entry = (image_entry_arg_t) spl_image.entry_point; cleanup_before_linux(); - image_entry(0, CONFIG_MACH_TYPE, arg); + image_entry(0, machid, arg); } #endif diff --git a/arch/blackfin/cpu/gpio.c b/arch/blackfin/cpu/gpio.c index f74a0b7..f9aff4d 100644 --- a/arch/blackfin/cpu/gpio.c +++ b/arch/blackfin/cpu/gpio.c @@ -247,7 +247,7 @@ static struct { static void portmux_setup(unsigned short per) { - u16 y, offset, muxreg; + u16 y, offset, muxreg, mask; u16 function = P_FUNCT2MUX(per); for (y = 0; y < ARRAY_SIZE(port_mux_lut); y++) { @@ -258,12 +258,13 @@ static void portmux_setup(unsigned short per) offset = port_mux_lut[y].offset; muxreg = bfin_read_PORT_MUX(); - if (offset != 1) - muxreg &= ~(1 << offset); + if (offset == 1) + mask = 3; else - muxreg &= ~(3 << 1); + mask = 1; - muxreg |= (function << offset); + muxreg &= ~(mask << offset); + muxreg |= ((function & mask) << offset); bfin_write_PORT_MUX(muxreg); } } @@ -662,8 +663,8 @@ void special_gpio_free(unsigned gpio) return; } - reserve(special_gpio, gpio); - reserve(peri, gpio); + unreserve(special_gpio, gpio); + unreserve(peri, gpio); set_label(gpio, "free"); } #endif diff --git a/arch/blackfin/lib/board.c b/arch/blackfin/lib/board.c index 10223bd..17d1f46 100644 --- a/arch/blackfin/lib/board.c +++ b/arch/blackfin/lib/board.c @@ -67,6 +67,7 @@ static int display_banner(void) static int init_baudrate(void) { gd->baudrate = getenv_ulong("baudrate", 10, CONFIG_BAUDRATE); + gd->bd->bi_baudrate = gd->baudrate; return 0; } @@ -235,8 +236,6 @@ static int global_board_data_init(void) bd->bi_sclk = get_sclk(); bd->bi_memstart = CONFIG_SYS_SDRAM_BASE; bd->bi_memsize = CONFIG_SYS_MAX_RAM_SIZE; - bd->bi_baudrate = (gd->baudrate > 0) - ? simple_strtoul(gd->baudrate, NULL, 10) : CONFIG_BAUDRATE; return 0; } diff --git a/arch/microblaze/config.mk b/arch/microblaze/config.mk index 6692f24..fc545a9 100644 --- a/arch/microblaze/config.mk +++ b/arch/microblaze/config.mk @@ -15,5 +15,3 @@ CONFIG_STANDALONE_LOAD_ADDR ?= 0x80F00000 PLATFORM_CPPFLAGS += -ffixed-r31 -D__microblaze__ LDSCRIPT ?= $(SRCTREE)/$(CPUDIR)/u-boot.lds - -CONFIG_ARCH_DEVICE_TREE := microblaze diff --git a/arch/microblaze/lib/board.c b/arch/microblaze/lib/board.c index 8267191..f7182f2 100644 --- a/arch/microblaze/lib/board.c +++ b/arch/microblaze/lib/board.c @@ -16,6 +16,7 @@ #include <stdio_dev.h> #include <serial.h> #include <net.h> +#include <spi.h> #include <linux/compiler.h> #include <asm/processor.h> #include <asm/microblaze_intc.h> @@ -147,6 +148,10 @@ void board_init_f(ulong not_used) } #endif +#ifdef CONFIG_SPI + spi_init(); +#endif + /* relocate environment function pointers etc. */ env_relocate(); diff --git a/arch/mips/include/asm/config.h b/arch/mips/include/asm/config.h index cd29734..3a891ba 100644 --- a/arch/mips/include/asm/config.h +++ b/arch/mips/include/asm/config.h @@ -7,4 +7,7 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ +#define CONFIG_LMB +#define CONFIG_SYS_BOOT_RAMDISK_HIGH + #endif diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile index e9f82f7..f91406c 100644 --- a/arch/mips/lib/Makefile +++ b/arch/mips/lib/Makefile @@ -19,11 +19,7 @@ LGOBJS := $(addprefix $(obj),$(GLSOBJS)) SOBJS-y += COBJS-y += board.o -ifeq ($(CONFIG_QEMU_MIPS),y) -COBJS-$(CONFIG_CMD_BOOTM) += bootm_qemu_mips.o -else COBJS-$(CONFIG_CMD_BOOTM) += bootm.o -endif SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y)) diff --git a/arch/mips/lib/bootm.c b/arch/mips/lib/bootm.c index ade9af4..66340ea 100644 --- a/arch/mips/lib/bootm.c +++ b/arch/mips/lib/bootm.c @@ -17,23 +17,148 @@ DECLARE_GLOBAL_DATA_PTR; #define LINUX_MAX_ENVS 256 #define LINUX_MAX_ARGS 256 +#if defined(CONFIG_QEMU_MALTA) +#define mips_boot_qemu_malta 1 +#else +#define mips_boot_qemu_malta 0 +#endif + static int linux_argc; static char **linux_argv; +static char *linux_argp; static char **linux_env; static char *linux_env_p; static int linux_env_idx; -static void linux_params_init(ulong start, char *commandline); -static void linux_env_set(char *env_name, char *env_val); +static ulong arch_get_sp(void) +{ + ulong ret; + + __asm__ __volatile__("move %0, $sp" : "=r"(ret) : ); + + return ret; +} + +void arch_lmb_reserve(struct lmb *lmb) +{ + ulong sp; + + sp = arch_get_sp(); + debug("## Current stack ends at 0x%08lx\n", sp); + + /* adjust sp by 4K to be safe */ + sp -= 4096; + lmb_reserve(lmb, sp, CONFIG_SYS_SDRAM_BASE + gd->ram_size - sp); +} + +static void linux_cmdline_init(void) +{ + linux_argc = 1; + linux_argv = (char **)UNCACHED_SDRAM(gd->bd->bi_boot_params); + linux_argv[0] = 0; + linux_argp = (char *)(linux_argv + LINUX_MAX_ARGS); +} + +static void linux_cmdline_set(const char *value, size_t len) +{ + linux_argv[linux_argc] = linux_argp; + memcpy(linux_argp, value, len); + linux_argp[len] = 0; + + linux_argp += len + 1; + linux_argc++; +} + +static void linux_cmdline_dump(void) +{ + int i; + + debug("## cmdline argv at 0x%p, argp at 0x%p\n", + linux_argv, linux_argp); + + for (i = 1; i < linux_argc; i++) + debug(" arg %03d: %s\n", i, linux_argv[i]); +} + +static void boot_cmdline_linux(bootm_headers_t *images) +{ + const char *bootargs, *next, *quote; + + linux_cmdline_init(); + + bootargs = getenv("bootargs"); + if (!bootargs) + return; + + next = bootargs; + + while (bootargs && *bootargs && linux_argc < LINUX_MAX_ARGS) { + quote = strchr(bootargs, '"'); + next = strchr(bootargs, ' '); + + while (next && quote && quote < next) { + /* + * we found a left quote before the next blank + * now we have to find the matching right quote + */ + next = strchr(quote + 1, '"'); + if (next) { + quote = strchr(next + 1, '"'); + next = strchr(next + 1, ' '); + } + } + + if (!next) + next = bootargs + strlen(bootargs); + + linux_cmdline_set(bootargs, next - bootargs); + + if (*next) + next++; + + bootargs = next; + } + + linux_cmdline_dump(); +} + +static void linux_env_init(void) +{ + linux_env = (char **)(((ulong) linux_argp + 15) & ~15); + linux_env[0] = 0; + linux_env_p = (char *)(linux_env + LINUX_MAX_ENVS); + linux_env_idx = 0; +} + +static void linux_env_set(const char *env_name, const char *env_val) +{ + if (linux_env_idx < LINUX_MAX_ENVS - 1) { + linux_env[linux_env_idx] = linux_env_p; + + strcpy(linux_env_p, env_name); + linux_env_p += strlen(env_name); + + if (mips_boot_qemu_malta) { + linux_env_p++; + linux_env[++linux_env_idx] = linux_env_p; + } else { + *linux_env_p++ = '='; + } + + strcpy(linux_env_p, env_val); + linux_env_p += strlen(env_val); + + linux_env_p++; + linux_env[++linux_env_idx] = 0; + } +} static void boot_prep_linux(bootm_headers_t *images) { - char *commandline = getenv("bootargs"); char env_buf[12]; - char *cp; - - linux_params_init(UNCACHED_SDRAM(gd->bd->bi_boot_params), commandline); + const char *cp; + ulong rd_start, rd_size; #ifdef CONFIG_MEMSIZE_IN_BYTES sprintf(env_buf, "%lu", (ulong)gd->ram_size); @@ -41,15 +166,20 @@ static void boot_prep_linux(bootm_headers_t *images) #else sprintf(env_buf, "%lu", (ulong)(gd->ram_size >> 20)); debug("## Giving linux memsize in MB, %lu\n", - (ulong)(gd->ram_size >> 20)); + (ulong)(gd->ram_size >> 20)); #endif /* CONFIG_MEMSIZE_IN_BYTES */ + rd_start = UNCACHED_SDRAM(images->initrd_start); + rd_size = images->initrd_end - images->initrd_start; + + linux_env_init(); + linux_env_set("memsize", env_buf); - sprintf(env_buf, "0x%08X", (uint) UNCACHED_SDRAM(images->rd_start)); + sprintf(env_buf, "0x%08lX", rd_start); linux_env_set("initrd_start", env_buf); - sprintf(env_buf, "0x%X", (uint) (images->rd_end - images->rd_start)); + sprintf(env_buf, "0x%lX", rd_size); linux_env_set("initrd_size", env_buf); sprintf(env_buf, "0x%08X", (uint) (gd->bd->bi_flashstart)); @@ -65,33 +195,42 @@ static void boot_prep_linux(bootm_headers_t *images) cp = getenv("eth1addr"); if (cp) linux_env_set("eth1addr", cp); + + if (mips_boot_qemu_malta) + linux_env_set("modetty0", "38400n8r"); } static void boot_jump_linux(bootm_headers_t *images) { - void (*theKernel) (int, char **, char **, int *); - - /* find kernel entry point */ - theKernel = (void (*)(int, char **, char **, int *))images->ep; + typedef void __noreturn (*kernel_entry_t)(int, ulong, ulong, ulong); + kernel_entry_t kernel = (kernel_entry_t) images->ep; + ulong linux_extra = 0; - debug("## Transferring control to Linux (at address %08lx) ...\n", - (ulong) theKernel); + debug("## Transferring control to Linux (at address %p) ...\n", kernel); bootstage_mark(BOOTSTAGE_ID_RUN_OS); + if (mips_boot_qemu_malta) + linux_extra = gd->ram_size; + /* we assume that the kernel is in place */ printf("\nStarting kernel ...\n\n"); - theKernel(linux_argc, linux_argv, linux_env, 0); + kernel(linux_argc, (ulong)linux_argv, (ulong)linux_env, linux_extra); } int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *images) { /* No need for those on MIPS */ - if (flag & BOOTM_STATE_OS_BD_T || flag & BOOTM_STATE_OS_CMDLINE) + if (flag & BOOTM_STATE_OS_BD_T) return -1; + if (flag & BOOTM_STATE_OS_CMDLINE) { + boot_cmdline_linux(images); + return 0; + } + if (flag & BOOTM_STATE_OS_PREP) { boot_prep_linux(images); return 0; @@ -102,76 +241,10 @@ int do_bootm_linux(int flag, int argc, char * const argv[], return 0; } + boot_cmdline_linux(images); boot_prep_linux(images); boot_jump_linux(images); /* does not return */ return 1; } - -static void linux_params_init(ulong start, char *line) -{ - char *next, *quote, *argp; - - linux_argc = 1; - linux_argv = (char **) start; - linux_argv[0] = 0; - argp = (char *) (linux_argv + LINUX_MAX_ARGS); - - next = line; - - while (line && *line && linux_argc < LINUX_MAX_ARGS) { - quote = strchr(line, '"'); - next = strchr(line, ' '); - - while (next && quote && quote < next) { - /* we found a left quote before the next blank - * now we have to find the matching right quote - */ - next = strchr(quote + 1, '"'); - if (next) { - quote = strchr(next + 1, '"'); - next = strchr(next + 1, ' '); - } - } - - if (!next) - next = line + strlen(line); - - linux_argv[linux_argc] = argp; - memcpy(argp, line, next - line); - argp[next - line] = 0; - - argp += next - line + 1; - linux_argc++; - - if (*next) - next++; - - line = next; - } - - linux_env = (char **) (((ulong) argp + 15) & ~15); - linux_env[0] = 0; - linux_env_p = (char *) (linux_env + LINUX_MAX_ENVS); - linux_env_idx = 0; -} - -static void linux_env_set(char *env_name, char *env_val) -{ - if (linux_env_idx < LINUX_MAX_ENVS - 1) { - linux_env[linux_env_idx] = linux_env_p; - - strcpy(linux_env_p, env_name); - linux_env_p += strlen(env_name); - - strcpy(linux_env_p, "="); - linux_env_p += 1; - - strcpy(linux_env_p, env_val); - linux_env_p += strlen(env_val); - - linux_env_p++; - linux_env[++linux_env_idx] = 0; - } -} diff --git a/arch/mips/lib/bootm_qemu_mips.c b/arch/mips/lib/bootm_qemu_mips.c deleted file mode 100644 index 910ab73..0000000 --- a/arch/mips/lib/bootm_qemu_mips.c +++ /dev/null @@ -1,62 +0,0 @@ -/* - * (C) Copyright 2008 - * Jean-Christophe PLAGNIOL-VILLARD <jcplagniol@jcrosoft.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <command.h> -#include <image.h> -#include <asm/byteorder.h> -#include <asm/addrspace.h> - -DECLARE_GLOBAL_DATA_PTR; - -int do_bootm_linux(int flag, int argc, char * const argv[], - bootm_headers_t *images) -{ - void (*theKernel) (int, char **, char **, int *); - char *bootargs = getenv("bootargs"); - char *start; - uint len; - - /* find kernel entry point */ - theKernel = (void (*)(int, char **, char **, int *))images->ep; - - bootstage_mark(BOOTSTAGE_ID_RUN_OS); - - debug("## Transferring control to Linux (at address %08lx) ...\n", - (ulong) theKernel); - - gd->bd->bi_boot_params = gd->bd->bi_memstart + (16 << 20) - 256; - debug("%-12s= 0x%08lX\n", "boot_params", (ulong)gd->bd->bi_boot_params); - - /* set Magic */ - *(int32_t *)(gd->bd->bi_boot_params - 4) = 0x12345678; - /* set ram_size */ - *(int32_t *)(gd->bd->bi_boot_params - 8) = gd->ram_size; - - start = (char *)gd->bd->bi_boot_params; - - len = strlen(bootargs); - - strncpy(start, bootargs, len + 1); - - start += len; - - len = images->rd_end - images->rd_start; - if (len > 0) { - start += sprintf(start, " rd_start=0x%08X rd_size=0x%0X", - (uint) UNCACHED_SDRAM(images->rd_start), - (uint) len); - } - - /* we assume that the kernel is in place */ - printf("\nStarting kernel ...\n\n"); - - theKernel(0, NULL, NULL, 0); - - /* does not return */ - return 1; -} diff --git a/arch/nds32/include/asm/dma-mapping.h b/arch/nds32/include/asm/dma-mapping.h new file mode 100644 index 0000000..25e5a1b --- /dev/null +++ b/arch/nds32/include/asm/dma-mapping.h @@ -0,0 +1,33 @@ +/* + * Copyright (C) 2013 Andes Technology Corporation + * Ken Kuo, Andes Technology Corporation <ken_kuo@andestech.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef __ASM_NDS_DMA_MAPPING_H +#define __ASM_NDS_DMA_MAPPING_H + +enum dma_data_direction { + DMA_BIDIRECTIONAL = 0, + DMA_TO_DEVICE = 1, + DMA_FROM_DEVICE = 2, +}; + +static void *dma_alloc_coherent(size_t len, unsigned long *handle) +{ + *handle = (unsigned long)memalign(ARCH_DMA_MINALIGN, len); + return (void *)*handle; +} + +static inline unsigned long dma_map_single(volatile void *vaddr, size_t len, + enum dma_data_direction dir) +{ + return (unsigned long)vaddr; +} + +static inline void dma_unmap_single(volatile void *vaddr, size_t len, + unsigned long paddr) +{ +} + +#endif /* __ASM_NDS_DMA_MAPPING_H */ diff --git a/arch/powerpc/cpu/mpc824x/cpu.c b/arch/powerpc/cpu/mpc824x/cpu.c index ee69e49..eaa4e87 100644 --- a/arch/powerpc/cpu/mpc824x/cpu.c +++ b/arch/powerpc/cpu/mpc824x/cpu.c @@ -45,12 +45,10 @@ int checkcpu (void) return -1; /* no valid CPU revision info */ } - printf (" at %s MHz:", strmhz (buf, clock)); + printf(" at %s MHz: ", strmhz(buf, clock)); - printf (" %u kB I-Cache", checkicache () >> 10); - printf (" %u kB D-Cache", checkdcache () >> 10); - - puts ("\n"); + print_size(checkicache(), " I-Cache "); + print_size(checkdcache(), " D-Cache\n"); return 0; } diff --git a/arch/powerpc/cpu/mpc83xx/pcie.c b/arch/powerpc/cpu/mpc83xx/pcie.c index 09970b0..28c25e5 100644 --- a/arch/powerpc/cpu/mpc83xx/pcie.c +++ b/arch/powerpc/cpu/mpc83xx/pcie.c @@ -299,6 +299,8 @@ static void mpc83xx_pcie_init_bus(int bus, struct pci_region *reg) printf("PCIE%d: ", bus); +#define PCI_LTSSM 0x404 /* PCIe Link Training, Status State Machine */ +#define PCI_LTSSM_L0 0x16 /* L0 state */ reg16 = in_le16(hose_cfg_base + PCI_LTSSM); if (reg16 >= PCI_LTSSM_L0) printf("link\n"); diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile index 0d1e8f1..f70f0d7 100644 --- a/arch/powerpc/cpu/mpc85xx/Makefile +++ b/arch/powerpc/cpu/mpc85xx/Makefile @@ -46,6 +46,7 @@ COBJS-$(CONFIG_MPC8568) += ddr-gen2.o COBJS-$(CONFIG_MPC8544) += ddr-gen2.o # supports ddr1/2/3 +COBJS-$(CONFIG_PPC_C29X) += ddr-gen3.o COBJS-$(CONFIG_MPC8572) += ddr-gen3.o COBJS-$(CONFIG_MPC8536) += ddr-gen3.o COBJS-$(CONFIG_MPC8569) += ddr-gen3.o @@ -100,6 +101,7 @@ COBJS-$(CONFIG_SYS_FSL_QORIQ_CHASSIS1) += fsl_corenet_serdes.o COBJS-$(CONFIG_SYS_FSL_QORIQ_CHASSIS2) += fsl_corenet2_serdes.o # SoC specific SERDES support +COBJS-$(CONFIG_PPC_C29X) += c29x_serdes.o COBJS-$(CONFIG_MPC8536) += mpc8536_serdes.o COBJS-$(CONFIG_MPC8544) += mpc8544_serdes.o COBJS-$(CONFIG_MPC8548) += mpc8548_serdes.o diff --git a/arch/powerpc/cpu/mpc85xx/b4860_ids.c b/arch/powerpc/cpu/mpc85xx/b4860_ids.c index 53c6a7f..39b8e3e 100644 --- a/arch/powerpc/cpu/mpc85xx/b4860_ids.c +++ b/arch/powerpc/cpu/mpc85xx/b4860_ids.c @@ -41,8 +41,8 @@ struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = { #ifdef CONFIG_SYS_SRIO struct srio_liodn_id_table srio_liodn_tbl[] = { - SET_SRIO_LIODN_1(1, 307), - SET_SRIO_LIODN_1(2, 387), + SET_SRIO_LIODN_BASE(1, 307), + SET_SRIO_LIODN_BASE(2, 387), }; int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl); #endif @@ -112,10 +112,10 @@ int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl); #ifdef CONFIG_SYS_DPAA_RMAN struct liodn_id_table rman_liodn_tbl[] = { /* Set RMan block 0-3 liodn offset */ - SET_RMAN_LIODN(0, 678), - SET_RMAN_LIODN(1, 679), - SET_RMAN_LIODN(2, 680), - SET_RMAN_LIODN(3, 681), + SET_RMAN_LIODN(0, 6), + SET_RMAN_LIODN(1, 7), + SET_RMAN_LIODN(2, 8), + SET_RMAN_LIODN(3, 9), }; int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl); #endif diff --git a/arch/powerpc/cpu/mpc85xx/c29x_serdes.c b/arch/powerpc/cpu/mpc85xx/c29x_serdes.c new file mode 100644 index 0000000..51972cb --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/c29x_serdes.c @@ -0,0 +1,62 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <config.h> +#include <common.h> +#include <asm/io.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_serdes.h> + +#define SRDS1_MAX_LANES 4 + +static u32 serdes1_prtcl_map; + +struct serdes_config { + u32 protocol; + u8 lanes[SRDS1_MAX_LANES]; +}; + +static const struct serdes_config serdes1_cfg_tbl[] = { + /* SerDes 1 */ + {1, {PCIE1, PCIE1, PCIE1, PCIE1} }, + {2, {PCIE1, PCIE1, PCIE1, PCIE1} }, + {3, {PCIE1, PCIE1, NONE, NONE} }, + {4, {PCIE1, PCIE1, NONE, NONE} }, + {5, {PCIE1, NONE, NONE, NONE} }, + {6, {PCIE1, NONE, NONE, NONE} }, + {} +}; + +int is_serdes_configured(enum srds_prtcl device) +{ + return (1 << device) & serdes1_prtcl_map; +} + +void fsl_serdes_init(void) +{ + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + u32 pordevsr = in_be32(&gur->pordevsr); + u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> + MPC85xx_PORDEVSR_IO_SEL_SHIFT; + const struct serdes_config *ptr; + int lane; + + debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg); + + if (srds_cfg > ARRAY_SIZE(serdes1_cfg_tbl)) { + printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg); + return; + } + + ptr = &serdes1_cfg_tbl[srds_cfg]; + if (!ptr->protocol) + return; + + for (lane = 0; lane < SRDS1_MAX_LANES; lane++) { + enum srds_prtcl lane_prtcl = ptr->lanes[lane]; + serdes1_prtcl_map |= (1 << lane_prtcl); + } +} diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c index 5cd02cc..eea264b 100644 --- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c +++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c @@ -245,6 +245,18 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #ifdef CONFIG_SYS_FSL_ERRATUM_A006593 puts("Work-around for Erratum A006593 enabled\n"); #endif +#ifdef CONFIG_SYS_FSL_ERRATUM_SEC_A003571 + if (IS_SVR_REV(svr, 1, 0)) + puts("Work-around for Erratum A003571 enabled\n"); +#endif +#ifdef CONFIG_SYS_FSL_ERRATUM_A005812 + puts("Work-around for Erratum A-005812 enabled\n"); +#endif +#ifdef CONFIG_SYS_FSL_ERRATUM_I2C_A004447 + if ((SVR_SOC_VER(svr) == SVR_8548 && IS_SVR_REV(svr, 3, 1)) || + (SVR_REV(svr) <= CONFIG_SYS_FSL_A004447_SVR_REV)) + puts("Work-around for Erratum I2C-A004447 enabled\n"); +#endif return 0; } diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c index 91ac4ee..1a0196c 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu.c +++ b/arch/powerpc/cpu/mpc85xx/cpu.c @@ -44,10 +44,10 @@ int checkcpu (void) uint major, minor; struct cpu_type *cpu; char buf1[32], buf2[32]; -#if (defined(CONFIG_DDR_CLK_FREQ) || \ - defined(CONFIG_FSL_CORENET)) && !defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); -#endif /* CONFIG_FSL_CORENET */ +#if defined(CONFIG_DDR_CLK_FREQ) || defined(CONFIG_FSL_CORENET) + ccsr_gur_t __iomem *gur = + (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); +#endif /* * Cornet platforms use ddr sync bit in RCW to indicate sync vs async @@ -135,81 +135,97 @@ int checkcpu (void) if (!(i & 3)) printf ("\n "); printf("CPU%d:%-4s MHz, ", core, - strmhz(buf1, sysinfo.freqProcessor[core])); + strmhz(buf1, sysinfo.freq_processor[core])); } - printf("\n CCB:%-4s MHz,\n", strmhz(buf1, sysinfo.freqSystemBus)); + printf("\n CCB:%-4s MHz,", strmhz(buf1, sysinfo.freq_systembus)); + printf("\n"); #ifdef CONFIG_FSL_CORENET if (ddr_sync == 1) { printf(" DDR:%-4s MHz (%s MT/s data rate) " "(Synchronous), ", - strmhz(buf1, sysinfo.freqDDRBus/2), - strmhz(buf2, sysinfo.freqDDRBus)); + strmhz(buf1, sysinfo.freq_ddrbus/2), + strmhz(buf2, sysinfo.freq_ddrbus)); } else { printf(" DDR:%-4s MHz (%s MT/s data rate) " "(Asynchronous), ", - strmhz(buf1, sysinfo.freqDDRBus/2), - strmhz(buf2, sysinfo.freqDDRBus)); + strmhz(buf1, sysinfo.freq_ddrbus/2), + strmhz(buf2, sysinfo.freq_ddrbus)); } #else switch (ddr_ratio) { case 0x0: printf(" DDR:%-4s MHz (%s MT/s data rate), ", - strmhz(buf1, sysinfo.freqDDRBus/2), - strmhz(buf2, sysinfo.freqDDRBus)); + strmhz(buf1, sysinfo.freq_ddrbus/2), + strmhz(buf2, sysinfo.freq_ddrbus)); break; case 0x7: printf(" DDR:%-4s MHz (%s MT/s data rate) " "(Synchronous), ", - strmhz(buf1, sysinfo.freqDDRBus/2), - strmhz(buf2, sysinfo.freqDDRBus)); + strmhz(buf1, sysinfo.freq_ddrbus/2), + strmhz(buf2, sysinfo.freq_ddrbus)); break; default: printf(" DDR:%-4s MHz (%s MT/s data rate) " "(Asynchronous), ", - strmhz(buf1, sysinfo.freqDDRBus/2), - strmhz(buf2, sysinfo.freqDDRBus)); + strmhz(buf1, sysinfo.freq_ddrbus/2), + strmhz(buf2, sysinfo.freq_ddrbus)); break; } #endif #if defined(CONFIG_FSL_LBC) - if (sysinfo.freqLocalBus > LCRR_CLKDIV) { - printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus)); + if (sysinfo.freq_localbus > LCRR_CLKDIV) { + printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freq_localbus)); } else { printf("LBC: unknown (LCRR[CLKDIV] = 0x%02lx)\n", - sysinfo.freqLocalBus); + sysinfo.freq_localbus); } #endif #if defined(CONFIG_FSL_IFC) - printf("IFC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus)); + printf("IFC:%-4s MHz\n", strmhz(buf1, sysinfo.freq_localbus)); #endif #ifdef CONFIG_CPM2 - printf("CPM: %s MHz\n", strmhz(buf1, sysinfo.freqSystemBus)); + printf("CPM: %s MHz\n", strmhz(buf1, sysinfo.freq_systembus)); #endif #ifdef CONFIG_QE - printf(" QE:%-4s MHz\n", strmhz(buf1, sysinfo.freqQE)); + printf(" QE:%-4s MHz\n", strmhz(buf1, sysinfo.freq_qe)); #endif #ifdef CONFIG_SYS_DPAA_FMAN for (i = 0; i < CONFIG_SYS_NUM_FMAN; i++) { printf(" FMAN%d: %s MHz\n", i + 1, - strmhz(buf1, sysinfo.freqFMan[i])); + strmhz(buf1, sysinfo.freq_fman[i])); } #endif #ifdef CONFIG_SYS_DPAA_QBMAN - printf(" QMAN: %s MHz\n", strmhz(buf1, sysinfo.freqQMAN)); + printf(" QMAN: %s MHz\n", strmhz(buf1, sysinfo.freq_qman)); #endif #ifdef CONFIG_SYS_DPAA_PME - printf(" PME: %s MHz\n", strmhz(buf1, sysinfo.freqPME)); + printf(" PME: %s MHz\n", strmhz(buf1, sysinfo.freq_pme)); #endif - puts("L1: D-cache 32 kB enabled\n I-cache 32 kB enabled\n"); + puts("L1: D-cache 32 KiB enabled\n I-cache 32 KiB enabled\n"); + +#ifdef CONFIG_FSL_CORENET + /* Display the RCW, so that no one gets confused as to what RCW + * we're actually using for this boot. + */ + puts("Reset Configuration Word (RCW):"); + for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) { + u32 rcw = in_be32(&gur->rcwsr[i]); + + if ((i % 4) == 0) + printf("\n %08x:", i * 4); + printf(" %08x", rcw); + } + puts("\n"); +#endif return 0; } diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index 25beda2..6036333 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -22,6 +22,7 @@ #include <asm/fsl_law.h> #include <asm/fsl_serdes.h> #include <asm/fsl_srio.h> +#include <fsl_usb.h> #include <hwconfig.h> #include <linux/compiler.h> #include "mp.h" @@ -166,7 +167,8 @@ static void enable_cpc(void) } - printf("Corenet Platform Cache: %d KB enabled\n", size); + puts("Corenet Platform Cache: "); + print_size(size * 1024, " enabled\n"); } static void invalidate_cpc(void) @@ -355,7 +357,9 @@ int cpu_init_r(void) extern int spin_table_compat; const char *spin; #endif - +#ifdef CONFIG_SYS_FSL_ERRATUM_SEC_A003571 + ccsr_sec_t __iomem *sec = (void *)CONFIG_SYS_FSL_SEC_ADDR; +#endif #if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \ defined(CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011) /* @@ -399,6 +403,14 @@ int cpu_init_r(void) sync(); } #endif +#ifdef CONFIG_SYS_FSL_ERRATUM_A005812 + /* + * A-005812 workaround sets bit 32 of SPR 976 for SoCs running + * in write shadow mode. Checking DCWS before setting SPR 976. + */ + if (mfspr(L1CSR2) & L1CSR2_DCWS) + mtspr(SPRN_HDBCR0, (mfspr(SPRN_HDBCR0) | 0x80000000)); +#endif #if defined(CONFIG_PPC_SPINTABLE_COMPATIBLE) && defined(CONFIG_MP) spin = getenv("spin_table_compat"); @@ -448,28 +460,28 @@ int cpu_init_r(void) case 0x1: if (ver == SVR_8540 || ver == SVR_8560 || ver == SVR_8541 || ver == SVR_8555) { - puts("128 KB "); - /* set L2E=1, L2I=1, & L2BLKSZ=1 (128 Kbyte) */ + puts("128 KiB "); + /* set L2E=1, L2I=1, & L2BLKSZ=1 (128 KiBibyte) */ cache_ctl = 0xc4000000; } else { - puts("256 KB "); + puts("256 KiB "); cache_ctl = 0xc0000000; /* set L2E=1, L2I=1, & L2SRAM=0 */ } break; case 0x2: if (ver == SVR_8540 || ver == SVR_8560 || ver == SVR_8541 || ver == SVR_8555) { - puts("256 KB "); - /* set L2E=1, L2I=1, & L2BLKSZ=2 (256 Kbyte) */ + puts("256 KiB "); + /* set L2E=1, L2I=1, & L2BLKSZ=2 (256 KiBibyte) */ cache_ctl = 0xc8000000; } else { - puts ("512 KB "); + puts("512 KiB "); /* set L2E=1, L2I=1, & L2SRAM=0 */ cache_ctl = 0xc0000000; } break; case 0x3: - puts("1024 KB "); + puts("1024 KiB "); /* set L2E=1, L2I=1, & L2SRAM=0 */ cache_ctl = 0xc0000000; break; @@ -517,13 +529,14 @@ int cpu_init_r(void) if (CONFIG_SYS_INIT_L2CSR0 & L2CSR0_L2E) { while (!(mfspr(SPRN_L2CSR0) & L2CSR0_L2E)) ; - printf("%d KB enabled\n", (l2cfg0 & 0x3fff) * 64); + print_size((l2cfg0 & 0x3fff) * 64 * 1024, " enabled\n"); } skip_l2: #elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) if (l2cache->l2csr0 & L2CSR0_L2E) - printf("%d KB enabled\n", (l2cache->l2cfg0 & 0x3fff) * 64); + print_size((l2cache->l2cfg0 & 0x3fff) * 64 * 1024, + " enabled\n"); enable_cluster_l2(); #else @@ -532,8 +545,16 @@ skip_l2: enable_cpc(); +#ifndef CONFIG_SYS_FSL_NO_SERDES /* needs to be in ram since code uses global static vars */ fsl_serdes_init(); +#endif + +#ifdef CONFIG_SYS_FSL_ERRATUM_SEC_A003571 +#define MCFGR_AXIPIPE 0x000000f0 + if (IS_SVR_REV(svr, 1, 0)) + clrbits_be32(&sec->mcfgr, MCFGR_AXIPIPE); +#endif #ifdef CONFIG_SYS_FSL_ERRATUM_A005871 if (IS_SVR_REV(svr, 1, 0)) { @@ -595,7 +616,7 @@ skip_l2: #ifdef CONFIG_SYS_FSL_USB1_PHY_ENABLE { - ccsr_usb_phy_t *usb_phy1 = + struct ccsr_usb_phy __iomem *usb_phy1 = (void *)CONFIG_SYS_MPC85xx_USB1_PHY_ADDR; out_be32(&usb_phy1->usb_enable_override, CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE); @@ -603,7 +624,7 @@ skip_l2: #endif #ifdef CONFIG_SYS_FSL_USB2_PHY_ENABLE { - ccsr_usb_phy_t *usb_phy2 = + struct ccsr_usb_phy __iomem *usb_phy2 = (void *)CONFIG_SYS_MPC85xx_USB2_PHY_ADDR; out_be32(&usb_phy2->usb_enable_override, CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE); @@ -625,7 +646,7 @@ skip_l2: #endif #if defined(CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE) - ccsr_usb_phy_t *usb_phy = + struct ccsr_usb_phy __iomem *usb_phy = (void *)CONFIG_SYS_MPC85xx_USB1_PHY_ADDR; setbits_be32(&usb_phy->pllprg[1], CONFIG_SYS_FSL_USB_PLLPRG2_PHY2_CLK_EN | diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen1.c b/arch/powerpc/cpu/mpc85xx/ddr-gen1.c index 8a86819..4dd8c0b 100644 --- a/arch/powerpc/cpu/mpc85xx/ddr-gen1.c +++ b/arch/powerpc/cpu/mpc85xx/ddr-gen1.c @@ -15,7 +15,7 @@ #endif void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, - unsigned int ctrl_num) + unsigned int ctrl_num, int step) { unsigned int i; volatile ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR; diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen2.c b/arch/powerpc/cpu/mpc85xx/ddr-gen2.c index a705862..542bc84 100644 --- a/arch/powerpc/cpu/mpc85xx/ddr-gen2.c +++ b/arch/powerpc/cpu/mpc85xx/ddr-gen2.c @@ -16,7 +16,7 @@ #endif void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, - unsigned int ctrl_num) + unsigned int ctrl_num, int step) { unsigned int i; ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR; diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c index c5b4720..1be51d3 100644 --- a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c +++ b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c @@ -15,8 +15,18 @@ #error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL #endif + +/* + * regs has the to-be-set values for DDR controller registers + * ctrl_num is the DDR controller number + * step: 0 goes through the initialization in one pass + * 1 sets registers and returns before enabling controller + * 2 resumes from step 1 and continues to initialize + * Dividing the initialization to two steps to deassert DDR reset signal + * to comply with JEDEC specs for RDIMMs. + */ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, - unsigned int ctrl_num) + unsigned int ctrl_num, int step) { unsigned int i, bus_width; volatile ccsr_ddr_t *ddr; @@ -54,6 +64,9 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, return; } + if (step == 2) + goto step2; + if (regs->ddr_eor) out_be32(&ddr->eor, regs->ddr_eor); #ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 @@ -123,10 +136,17 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, out_be32(&ddr->timing_cfg_5, regs->timing_cfg_5); out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl); out_be32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl); +#ifndef CONFIG_SYS_FSL_DDR_EMU + /* + * Skip these two registers if running on emulator + * because emulator doesn't have skew between bytes. + */ + if (regs->ddr_wrlvl_cntl_2) out_be32(&ddr->ddr_wrlvl_cntl_2, regs->ddr_wrlvl_cntl_2); if (regs->ddr_wrlvl_cntl_3) out_be32(&ddr->ddr_wrlvl_cntl_3, regs->ddr_wrlvl_cntl_3); +#endif out_be32(&ddr->ddr_sr_cntr, regs->ddr_sr_cntr); out_be32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1); @@ -150,6 +170,20 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, out_be32(&ddr->debug[21], 0x24000000); #endif /* CONFIG_SYS_FSL_ERRATUM_DDR_A003474 */ + /* + * For RDIMMs, JEDEC spec requires clocks to be stable before reset is + * deasserted. Clocks start when any chip select is enabled and clock + * control register is set. Because all DDR components are connected to + * one reset signal, this needs to be done in two steps. Step 1 is to + * get the clocks started. Step 2 resumes after reset signal is + * deasserted. + */ + if (step == 1) { + udelay(200); + return; + } + +step2: /* Set, but do not enable the memory */ temp_sdram_cfg = regs->ddr_sdram_cfg; temp_sdram_cfg &= ~(SDRAM_CFG_MEM_EN); diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c index cfaa2ed..533d47a 100644 --- a/arch/powerpc/cpu/mpc85xx/fdt.c +++ b/arch/powerpc/cpu/mpc85xx/fdt.c @@ -403,22 +403,22 @@ static void ft_fixup_dpaa_clks(void *blob) get_sys_info(&sysinfo); #ifdef CONFIG_SYS_DPAA_FMAN ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM1_OFFSET, - sysinfo.freqFMan[0]); + sysinfo.freq_fman[0]); #if (CONFIG_SYS_NUM_FMAN == 2) ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM2_OFFSET, - sysinfo.freqFMan[1]); + sysinfo.freq_fman[1]); #endif #endif #ifdef CONFIG_SYS_DPAA_QBMAN do_fixup_by_compat_u32(blob, "fsl,qman", - "clock-frequency", sysinfo.freqQMAN, 1); + "clock-frequency", sysinfo.freq_qman, 1); #endif #ifdef CONFIG_SYS_DPAA_PME do_fixup_by_compat_u32(blob, "fsl,pme", - "clock-frequency", sysinfo.freqPME, 1); + "clock-frequency", sysinfo.freq_pme, 1); #endif } #else @@ -476,7 +476,7 @@ void fdt_fixup_fman_firmware(void *blob) if (!p) return; - fmanfw = (struct qe_firmware *) simple_strtoul(p, NULL, 0); + fmanfw = (struct qe_firmware *) simple_strtoul(p, NULL, 16); if (!fmanfw) return; @@ -604,15 +604,19 @@ void ft_cpu_setup(void *blob, bd_t *bd) fdt_add_enet_stashing(blob); +#ifndef CONFIG_FSL_TBCLK_EXTRA_DIV +#define CONFIG_FSL_TBCLK_EXTRA_DIV 1 +#endif do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, - "timebase-frequency", get_tbclk(), 1); + "timebase-frequency", get_tbclk() / CONFIG_FSL_TBCLK_EXTRA_DIV, + 1); do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, "bus-frequency", bd->bi_busfreq, 1); get_sys_info(&sysinfo); off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4); while (off != -FDT_ERR_NOTFOUND) { u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0); - val = cpu_to_fdt32(sysinfo.freqProcessor[*reg]); + val = cpu_to_fdt32(sysinfo.freq_processor[*reg]); fdt_setprop(blob, off, "clock-frequency", &val, 4); off = fdt_node_offset_by_prop_value(blob, off, "device_type", "cpu", 4); diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c index de6bd11..39d9409 100644 --- a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c @@ -13,8 +13,12 @@ #include <asm/errno.h> #include "fsl_corenet2_serdes.h" +#ifdef CONFIG_SYS_FSL_SRDS_1 static u64 serdes1_prtcl_map; +#endif +#ifdef CONFIG_SYS_FSL_SRDS_2 static u64 serdes2_prtcl_map; +#endif #ifdef CONFIG_SYS_FSL_SRDS_3 static u64 serdes3_prtcl_map; #endif @@ -78,8 +82,12 @@ int is_serdes_configured(enum srds_prtcl device) { u64 ret = 0; +#ifdef CONFIG_SYS_FSL_SRDS_1 ret |= (1ULL << device) & serdes1_prtcl_map; +#endif +#ifdef CONFIG_SYS_FSL_SRDS_2 ret |= (1ULL << device) & serdes2_prtcl_map; +#endif #ifdef CONFIG_SYS_FSL_SRDS_3 ret |= (1ULL << device) & serdes3_prtcl_map; #endif @@ -97,14 +105,18 @@ int serdes_get_first_lane(u32 sd, enum srds_prtcl device) int i; switch (sd) { +#ifdef CONFIG_SYS_FSL_SRDS_1 case FSL_SRDS_1: cfg &= FSL_CORENET2_RCWSR4_SRDS1_PRTCL; cfg >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; break; +#endif +#ifdef CONFIG_SYS_FSL_SRDS_2 case FSL_SRDS_2: cfg &= FSL_CORENET2_RCWSR4_SRDS2_PRTCL; cfg >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT; break; +#endif #ifdef CONFIG_SYS_FSL_SRDS_3 case FSL_SRDS_3: cfg &= FSL_CORENET2_RCWSR4_SRDS3_PRTCL; @@ -163,14 +175,18 @@ u64 serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift) void fsl_serdes_init(void) { +#ifdef CONFIG_SYS_FSL_SRDS_1 serdes1_prtcl_map = serdes_init(FSL_SRDS_1, CONFIG_SYS_FSL_CORENET_SERDES_ADDR, FSL_CORENET2_RCWSR4_SRDS1_PRTCL, FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT); +#endif +#ifdef CONFIG_SYS_FSL_SRDS_2 serdes2_prtcl_map = serdes_init(FSL_SRDS_2, CONFIG_SYS_FSL_CORENET_SERDES_ADDR + FSL_SRDS_2 * 0x1000, FSL_CORENET2_RCWSR4_SRDS2_PRTCL, FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT); +#endif #ifdef CONFIG_SYS_FSL_SRDS_3 serdes3_prtcl_map = serdes_init(FSL_SRDS_3, CONFIG_SYS_FSL_CORENET_SERDES_ADDR + FSL_SRDS_3 * 0x1000, diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.h b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.h index 6de572d..d515b23 100644 --- a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.h +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.h @@ -9,5 +9,4 @@ int is_serdes_prtcl_valid(int serdes, u32 prtcl); int serdes_lane_enabled(int lane); -enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane); #endif /* __FSL_CORENET2_SERDES_H */ diff --git a/arch/powerpc/cpu/mpc85xx/release.S b/arch/powerpc/cpu/mpc85xx/release.S index 15bbbc1..c15e83b 100644 --- a/arch/powerpc/cpu/mpc85xx/release.S +++ b/arch/powerpc/cpu/mpc85xx/release.S @@ -226,6 +226,21 @@ __secondary_start_page: 2: #endif +#ifdef CONFIG_SYS_FSL_ERRATUM_A005812 + /* + * A-005812 workaround sets bit 32 of SPR 976 for SoCs running in + * write shadow mode. This code should run after other code setting + * DCWS. + */ + mfspr r3,L1CSR2 + andis. r3,r3,(L1CSR2_DCWS)@h + beq 1f + mfspr r3, SPRN_HDBCR0 + oris r3, r3, 0x8000 + mtspr SPRN_HDBCR0, r3 +1: +#endif + #ifdef CONFIG_BACKSIDE_L2_CACHE /* skip L2 setup on P2040/P2040E as they have no L2 */ mfspr r3,SPRN_SVR diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c index f093960..07690f9 100644 --- a/arch/powerpc/cpu/mpc85xx/speed.c +++ b/arch/powerpc/cpu/mpc85xx/speed.c @@ -20,7 +20,7 @@ DECLARE_GLOBAL_DATA_PTR; /* --------------------------------------------------------------- */ -void get_sys_info (sys_info_t * sysInfo) +void get_sys_info(sys_info_t *sys_info) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); #ifdef CONFIG_FSL_IFC @@ -46,7 +46,7 @@ void get_sys_info (sys_info_t * sysInfo) [14] = 3, /* CC4 PPL / 4 */ }; - const u8 core_cplx_PLL_div[16] = { + const u8 core_cplx_pll_div[16] = { [ 0] = 1, /* CC1 PPL / 1 */ [ 1] = 2, /* CC1 PPL / 2 */ [ 2] = 4, /* CC1 PPL / 4 */ @@ -60,26 +60,26 @@ void get_sys_info (sys_info_t * sysInfo) [13] = 2, /* CC4 PPL / 2 */ [14] = 4, /* CC4 PPL / 4 */ }; - uint i, freqCC_PLL[6], rcw_tmp; + uint i, freq_cc_pll[6], rcw_tmp; uint ratio[6]; unsigned long sysclk = CONFIG_SYS_CLK_FREQ; uint mem_pll_rat; - sysInfo->freqSystemBus = sysclk; + sys_info->freq_systembus = sysclk; #ifdef CONFIG_DDR_CLK_FREQ - sysInfo->freqDDRBus = CONFIG_DDR_CLK_FREQ; + sys_info->freq_ddrbus = CONFIG_DDR_CLK_FREQ; #else - sysInfo->freqDDRBus = sysclk; + sys_info->freq_ddrbus = sysclk; #endif - sysInfo->freqSystemBus *= (in_be32(&gur->rcwsr[0]) >> 25) & 0x1f; + sys_info->freq_systembus *= (in_be32(&gur->rcwsr[0]) >> 25) & 0x1f; mem_pll_rat = (in_be32(&gur->rcwsr[0]) >> FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT) & FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK; if (mem_pll_rat > 2) - sysInfo->freqDDRBus *= mem_pll_rat; + sys_info->freq_ddrbus *= mem_pll_rat; else - sysInfo->freqDDRBus = sysInfo->freqSystemBus * mem_pll_rat; + sys_info->freq_ddrbus = sys_info->freq_systembus * mem_pll_rat; ratio[0] = (in_be32(&clk->pllc1gsr) >> 1) & 0x3f; ratio[1] = (in_be32(&clk->pllc2gsr) >> 1) & 0x3f; @@ -89,9 +89,9 @@ void get_sys_info (sys_info_t * sysInfo) ratio[5] = (in_be32(&clk->pllc6gsr) >> 1) & 0x3f; for (i = 0; i < 6; i++) { if (ratio[i] > 4) - freqCC_PLL[i] = sysclk * ratio[i]; + freq_cc_pll[i] = sysclk * ratio[i]; else - freqCC_PLL[i] = sysInfo->freqSystemBus * ratio[i]; + freq_cc_pll[i] = sys_info->freq_systembus * ratio[i]; } #ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 /* @@ -110,8 +110,8 @@ void get_sys_info (sys_info_t * sysInfo) printf("Unsupported architecture configuration" " in function %s\n", __func__); cplx_pll += (cluster / 2) * 3; - sysInfo->freqProcessor[cpu] = - freqCC_PLL[cplx_pll] / core_cplx_PLL_div[c_pll_sel]; + sys_info->freq_processor[cpu] = + freq_cc_pll[cplx_pll] / core_cplx_pll_div[c_pll_sel]; } #ifdef CONFIG_PPC_B4860 #define FM1_CLK_SEL 0xe0000000 @@ -127,63 +127,63 @@ void get_sys_info (sys_info_t * sysInfo) #ifdef CONFIG_SYS_DPAA_PME switch ((rcw_tmp & PME_CLK_SEL) >> PME_CLK_SHIFT) { case 1: - sysInfo->freqPME = freqCC_PLL[0]; + sys_info->freq_pme = freq_cc_pll[0]; break; case 2: - sysInfo->freqPME = freqCC_PLL[0] / 2; + sys_info->freq_pme = freq_cc_pll[0] / 2; break; case 3: - sysInfo->freqPME = freqCC_PLL[0] / 3; + sys_info->freq_pme = freq_cc_pll[0] / 3; break; case 4: - sysInfo->freqPME = freqCC_PLL[0] / 4; + sys_info->freq_pme = freq_cc_pll[0] / 4; break; case 6: - sysInfo->freqPME = freqCC_PLL[1] / 2; + sys_info->freq_pme = freq_cc_pll[1] / 2; break; case 7: - sysInfo->freqPME = freqCC_PLL[1] / 3; + sys_info->freq_pme = freq_cc_pll[1] / 3; break; default: printf("Error: Unknown PME clock select!\n"); case 0: - sysInfo->freqPME = sysInfo->freqSystemBus / 2; + sys_info->freq_pme = sys_info->freq_systembus / 2; break; } #endif #ifdef CONFIG_SYS_DPAA_QBMAN - sysInfo->freqQMAN = sysInfo->freqSystemBus / 2; + sys_info->freq_qman = sys_info->freq_systembus / 2; #endif #ifdef CONFIG_SYS_DPAA_FMAN switch ((rcw_tmp & FM1_CLK_SEL) >> FM1_CLK_SHIFT) { case 1: - sysInfo->freqFMan[0] = freqCC_PLL[3]; + sys_info->freq_fman[0] = freq_cc_pll[3]; break; case 2: - sysInfo->freqFMan[0] = freqCC_PLL[3] / 2; + sys_info->freq_fman[0] = freq_cc_pll[3] / 2; break; case 3: - sysInfo->freqFMan[0] = freqCC_PLL[3] / 3; + sys_info->freq_fman[0] = freq_cc_pll[3] / 3; break; case 4: - sysInfo->freqFMan[0] = freqCC_PLL[3] / 4; + sys_info->freq_fman[0] = freq_cc_pll[3] / 4; break; case 5: - sysInfo->freqFMan[0] = sysInfo->freqSystemBus; + sys_info->freq_fman[0] = sys_info->freq_systembus; break; case 6: - sysInfo->freqFMan[0] = freqCC_PLL[4] / 2; + sys_info->freq_fman[0] = freq_cc_pll[4] / 2; break; case 7: - sysInfo->freqFMan[0] = freqCC_PLL[4] / 3; + sys_info->freq_fman[0] = freq_cc_pll[4] / 3; break; default: printf("Error: Unknown FMan1 clock select!\n"); case 0: - sysInfo->freqFMan[0] = sysInfo->freqSystemBus / 2; + sys_info->freq_fman[0] = sys_info->freq_systembus / 2; break; } #if (CONFIG_SYS_NUM_FMAN) == 2 @@ -192,27 +192,27 @@ void get_sys_info (sys_info_t * sysInfo) rcw_tmp = in_be32(&gur->rcwsr[15]); switch ((rcw_tmp & FM2_CLK_SEL) >> FM2_CLK_SHIFT) { case 1: - sysInfo->freqFMan[1] = freqCC_PLL[4]; + sys_info->freq_fman[1] = freq_cc_pll[4]; break; case 2: - sysInfo->freqFMan[1] = freqCC_PLL[4] / 2; + sys_info->freq_fman[1] = freq_cc_pll[4] / 2; break; case 3: - sysInfo->freqFMan[1] = freqCC_PLL[4] / 3; + sys_info->freq_fman[1] = freq_cc_pll[4] / 3; break; case 4: - sysInfo->freqFMan[1] = freqCC_PLL[4] / 4; + sys_info->freq_fman[1] = freq_cc_pll[4] / 4; break; case 6: - sysInfo->freqFMan[1] = freqCC_PLL[3] / 2; + sys_info->freq_fman[1] = freq_cc_pll[3] / 2; break; case 7: - sysInfo->freqFMan[1] = freqCC_PLL[3] / 3; + sys_info->freq_fman[1] = freq_cc_pll[3] / 3; break; default: printf("Error: Unknown FMan2 clock select!\n"); case 0: - sysInfo->freqFMan[1] = sysInfo->freqSystemBus / 2; + sys_info->freq_fman[1] = sys_info->freq_systembus / 2; break; } #endif /* CONFIG_SYS_NUM_FMAN == 2 */ @@ -225,8 +225,8 @@ void get_sys_info (sys_info_t * sysInfo) & 0xf; u32 cplx_pll = core_cplx_PLL[c_pll_sel]; - sysInfo->freqProcessor[cpu] = - freqCC_PLL[cplx_pll] / core_cplx_PLL_div[c_pll_sel]; + sys_info->freq_processor[cpu] = + freq_cc_pll[cplx_pll] / core_cplx_pll_div[c_pll_sel]; } #define PME_CLK_SEL 0x80000000 #define FM1_CLK_SEL 0x40000000 @@ -246,43 +246,43 @@ void get_sys_info (sys_info_t * sysInfo) #ifdef CONFIG_SYS_DPAA_PME if (rcw_tmp & PME_CLK_SEL) { if (rcw_tmp & HWA_ASYNC_DIV) - sysInfo->freqPME = freqCC_PLL[HWA_CC_PLL] / 4; + sys_info->freq_pme = freq_cc_pll[HWA_CC_PLL] / 4; else - sysInfo->freqPME = freqCC_PLL[HWA_CC_PLL] / 2; + sys_info->freq_pme = freq_cc_pll[HWA_CC_PLL] / 2; } else { - sysInfo->freqPME = sysInfo->freqSystemBus / 2; + sys_info->freq_pme = sys_info->freq_systembus / 2; } #endif #ifdef CONFIG_SYS_DPAA_FMAN if (rcw_tmp & FM1_CLK_SEL) { if (rcw_tmp & HWA_ASYNC_DIV) - sysInfo->freqFMan[0] = freqCC_PLL[HWA_CC_PLL] / 4; + sys_info->freq_fman[0] = freq_cc_pll[HWA_CC_PLL] / 4; else - sysInfo->freqFMan[0] = freqCC_PLL[HWA_CC_PLL] / 2; + sys_info->freq_fman[0] = freq_cc_pll[HWA_CC_PLL] / 2; } else { - sysInfo->freqFMan[0] = sysInfo->freqSystemBus / 2; + sys_info->freq_fman[0] = sys_info->freq_systembus / 2; } #if (CONFIG_SYS_NUM_FMAN) == 2 if (rcw_tmp & FM2_CLK_SEL) { if (rcw_tmp & HWA_ASYNC_DIV) - sysInfo->freqFMan[1] = freqCC_PLL[HWA_CC_PLL] / 4; + sys_info->freq_fman[1] = freq_cc_pll[HWA_CC_PLL] / 4; else - sysInfo->freqFMan[1] = freqCC_PLL[HWA_CC_PLL] / 2; + sys_info->freq_fman[1] = freq_cc_pll[HWA_CC_PLL] / 2; } else { - sysInfo->freqFMan[1] = sysInfo->freqSystemBus / 2; + sys_info->freq_fman[1] = sys_info->freq_systembus / 2; } #endif #endif #ifdef CONFIG_SYS_DPAA_QBMAN - sysInfo->freqQMAN = sysInfo->freqSystemBus / 2; + sys_info->freq_qman = sys_info->freq_systembus / 2; #endif #endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */ #else /* CONFIG_FSL_CORENET */ - uint plat_ratio, e500_ratio, half_freqSystemBus; + uint plat_ratio, e500_ratio, half_freq_systembus; int i; #ifdef CONFIG_QE __maybe_unused u32 qe_ratio; @@ -290,40 +290,40 @@ void get_sys_info (sys_info_t * sysInfo) plat_ratio = (gur->porpllsr) & 0x0000003e; plat_ratio >>= 1; - sysInfo->freqSystemBus = plat_ratio * CONFIG_SYS_CLK_FREQ; + sys_info->freq_systembus = plat_ratio * CONFIG_SYS_CLK_FREQ; /* Divide before multiply to avoid integer * overflow for processor speeds above 2GHz */ - half_freqSystemBus = sysInfo->freqSystemBus/2; + half_freq_systembus = sys_info->freq_systembus/2; for (i = 0; i < cpu_numcores(); i++) { e500_ratio = ((gur->porpllsr) >> (i * 8 + 16)) & 0x3f; - sysInfo->freqProcessor[i] = e500_ratio * half_freqSystemBus; + sys_info->freq_processor[i] = e500_ratio * half_freq_systembus; } - /* Note: freqDDRBus is the MCLK frequency, not the data rate. */ - sysInfo->freqDDRBus = sysInfo->freqSystemBus; + /* Note: freq_ddrbus is the MCLK frequency, not the data rate. */ + sys_info->freq_ddrbus = sys_info->freq_systembus; #ifdef CONFIG_DDR_CLK_FREQ { u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO) >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT; if (ddr_ratio != 0x7) - sysInfo->freqDDRBus = ddr_ratio * CONFIG_DDR_CLK_FREQ; + sys_info->freq_ddrbus = ddr_ratio * CONFIG_DDR_CLK_FREQ; } #endif #ifdef CONFIG_QE #if defined(CONFIG_P1012) || defined(CONFIG_P1021) || defined(CONFIG_P1025) - sysInfo->freqQE = sysInfo->freqSystemBus; + sys_info->freq_qe = sys_info->freq_systembus; #else qe_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_QE_RATIO) >> MPC85xx_PORPLLSR_QE_RATIO_SHIFT; - sysInfo->freqQE = qe_ratio * CONFIG_SYS_CLK_FREQ; + sys_info->freq_qe = qe_ratio * CONFIG_SYS_CLK_FREQ; #endif #endif #ifdef CONFIG_SYS_DPAA_FMAN - sysInfo->freqFMan[0] = sysInfo->freqSystemBus; + sys_info->freq_fman[0] = sys_info->freq_systembus; #endif #endif /* CONFIG_FSL_CORENET */ @@ -350,10 +350,10 @@ void get_sys_info (sys_info_t * sysInfo) */ lcrr_div *= 2; #endif - sysInfo->freqLocalBus = sysInfo->freqSystemBus / lcrr_div; + sys_info->freq_localbus = sys_info->freq_systembus / lcrr_div; } else { /* In case anyone cares what the unknown value is */ - sysInfo->freqLocalBus = lcrr_div; + sys_info->freq_localbus = lcrr_div; } #endif @@ -361,7 +361,7 @@ void get_sys_info (sys_info_t * sysInfo) ccr = in_be32(&ifc_regs->ifc_ccr); ccr = ((ccr & IFC_CCR_CLK_DIV_MASK) >> IFC_CCR_CLK_DIV_SHIFT) + 1; - sysInfo->freqLocalBus = sysInfo->freqSystemBus / ccr; + sys_info->freq_localbus = sys_info->freq_systembus / ccr; #endif } @@ -382,13 +382,13 @@ int get_clocks (void) dfbrg = (sccr & SCCR_DFBRG_MSK) >> SCCR_DFBRG_SHIFT; #endif get_sys_info (&sys_info); - gd->cpu_clk = sys_info.freqProcessor[0]; - gd->bus_clk = sys_info.freqSystemBus; - gd->mem_clk = sys_info.freqDDRBus; - gd->arch.lbc_clk = sys_info.freqLocalBus; + gd->cpu_clk = sys_info.freq_processor[0]; + gd->bus_clk = sys_info.freq_systembus; + gd->mem_clk = sys_info.freq_ddrbus; + gd->arch.lbc_clk = sys_info.freq_localbus; #ifdef CONFIG_QE - gd->arch.qe_clk = sys_info.freqQE; + gd->arch.qe_clk = sys_info.freq_qe; gd->arch.brg_clk = gd->arch.qe_clk / 2; #endif /* @@ -400,7 +400,7 @@ int get_clocks (void) */ #if defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \ defined(CONFIG_MPC8560) || defined(CONFIG_MPC8555) - gd->arch.i2c1_clk = sys_info.freqSystemBus; + gd->arch.i2c1_clk = sys_info.freq_systembus; #elif defined(CONFIG_MPC8544) /* * On the 8544, the I2C clock is the same as the SEC clock. This can be @@ -410,12 +410,12 @@ int get_clocks (void) * PORDEVSR2_SEC_CFG bit is 0 on all 85xx boards that are not an 8544. */ if (gur->pordevsr2 & MPC85xx_PORDEVSR2_SEC_CFG) - gd->arch.i2c1_clk = sys_info.freqSystemBus / 3; + gd->arch.i2c1_clk = sys_info.freq_systembus / 3; else - gd->arch.i2c1_clk = sys_info.freqSystemBus / 2; + gd->arch.i2c1_clk = sys_info.freq_systembus / 2; #else /* Most 85xx SOCs use CCB/2, so this is the default behavior. */ - gd->arch.i2c1_clk = sys_info.freqSystemBus / 2; + gd->arch.i2c1_clk = sys_info.freq_systembus / 2; #endif gd->arch.i2c2_clk = gd->arch.i2c1_clk; @@ -429,7 +429,7 @@ int get_clocks (void) #endif /* defined(CONFIG_FSL_ESDHC) */ #if defined(CONFIG_CPM2) - gd->arch.vco_out = 2*sys_info.freqSystemBus; + gd->arch.vco_out = 2*sys_info.freq_systembus; gd->arch.cpm_clk = gd->arch.vco_out / 2; gd->arch.scc_clk = gd->arch.vco_out / 4; gd->arch.brg_clk = gd->arch.vco_out / (1 << (2 * (dfbrg + 1))); diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S index cfc3a60..ad57a9c 100644 --- a/arch/powerpc/cpu/mpc85xx/start.S +++ b/arch/powerpc/cpu/mpc85xx/start.S @@ -33,7 +33,8 @@ #define MINIMAL_SPL #endif -#if !defined(CONFIG_SPL) && !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SECURE_BOOT) +#if !defined(CONFIG_SPL) && !defined(CONFIG_SYS_RAMBOOT) && \ + !defined(CONFIG_SECURE_BOOT) && !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) #define NOR_BOOT #endif diff --git a/arch/powerpc/cpu/mpc85xx/t4240_ids.c b/arch/powerpc/cpu/mpc85xx/t4240_ids.c index e173cb5..54c1cfd 100644 --- a/arch/powerpc/cpu/mpc85xx/t4240_ids.c +++ b/arch/powerpc/cpu/mpc85xx/t4240_ids.c @@ -65,8 +65,8 @@ struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = { #endif struct srio_liodn_id_table srio_liodn_tbl[] = { - SET_SRIO_LIODN_1(1, 307), - SET_SRIO_LIODN_1(2, 387), + SET_SRIO_LIODN_BASE(1, 307), + SET_SRIO_LIODN_BASE(2, 387), }; int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl); @@ -159,10 +159,10 @@ int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl); #ifdef CONFIG_SYS_DPAA_RMAN struct liodn_id_table rman_liodn_tbl[] = { /* Set RMan block 0-3 liodn offset */ - SET_RMAN_LIODN(0, 678), - SET_RMAN_LIODN(1, 679), - SET_RMAN_LIODN(2, 680), - SET_RMAN_LIODN(3, 681), + SET_RMAN_LIODN(0, 6), + SET_RMAN_LIODN(1, 7), + SET_RMAN_LIODN(2, 8), + SET_RMAN_LIODN(3, 9), }; int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl); #endif diff --git a/arch/powerpc/cpu/mpc85xx/t4240_serdes.c b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c index ed88602..ff55e3c 100644 --- a/arch/powerpc/cpu/mpc85xx/t4240_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c @@ -106,25 +106,25 @@ static const struct serdes_config serdes2_cfg_tbl[] = { SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, {38, {NONE, NONE, QSGMII_FM2_B, NONE, - NONE, NONE, QSGMII_FM1_A, NONE}}, + NONE, NONE, QSGMII_FM2_A, NONE} }, {40, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, - NONE, NONE, QSGMII_FM1_A, NONE}}, + NONE, NONE, QSGMII_FM2_A, NONE} }, {46, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, - NONE, NONE, QSGMII_FM1_A, NONE}}, + NONE, NONE, QSGMII_FM2_A, NONE} }, {48, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, - NONE, NONE, QSGMII_FM1_A, NONE}}, + NONE, NONE, QSGMII_FM2_A, NONE} }, {50, {XAUI_FM2_MAC9, XAUI_FM2_MAC9, XAUI_FM2_MAC9, XAUI_FM2_MAC9, - NONE, NONE, QSGMII_FM1_A, NONE}}, + NONE, NONE, QSGMII_FM2_A, NONE} }, {52, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, - NONE, NONE, QSGMII_FM1_A, NONE}}, + NONE, NONE, QSGMII_FM2_A, NONE} }, {54, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, - NONE, NONE, QSGMII_FM1_A, NONE}}, + NONE, NONE, QSGMII_FM2_A, NONE} }, {56, {XFI_FM1_MAC9, XFI_FM1_MAC10, XFI_FM2_MAC10, XFI_FM2_MAC9, SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, diff --git a/arch/powerpc/cpu/mpc85xx/tlb.c b/arch/powerpc/cpu/mpc85xx/tlb.c index da3c345..8748ecd 100644 --- a/arch/powerpc/cpu/mpc85xx/tlb.c +++ b/arch/powerpc/cpu/mpc85xx/tlb.c @@ -39,7 +39,8 @@ void init_tlbs(void) return ; } -#if !defined(CONFIG_NAND_SPL) && !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_NAND_SPL) && \ + (!defined(CONFIG_SPL_BUILD) || !defined(CONFIG_SPL_INIT_MINIMAL)) void read_tlbcam_entry(int idx, u32 *valid, u32 *tsize, unsigned long *epn, phys_addr_t *rpn) { diff --git a/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds b/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds index 08188d7..85ec74b 100644 --- a/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds +++ b/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds @@ -44,6 +44,11 @@ SECTIONS } _edata = .; + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + . = ALIGN(8); __init_begin = .; __init_end = .; diff --git a/arch/powerpc/cpu/mpc86xx/cpu.c b/arch/powerpc/cpu/mpc86xx/cpu.c index d6b28dd..3051854 100644 --- a/arch/powerpc/cpu/mpc86xx/cpu.c +++ b/arch/powerpc/cpu/mpc86xx/cpu.c @@ -72,21 +72,21 @@ checkcpu(void) get_sys_info(&sysinfo); puts("Clock Configuration:\n"); - printf(" CPU:%-4s MHz, ", strmhz(buf1, sysinfo.freqProcessor)); - printf("MPX:%-4s MHz\n", strmhz(buf1, sysinfo.freqSystemBus)); + printf(" CPU:%-4s MHz, ", strmhz(buf1, sysinfo.freq_processor)); + printf("MPX:%-4s MHz\n", strmhz(buf1, sysinfo.freq_systembus)); printf(" DDR:%-4s MHz (%s MT/s data rate), ", - strmhz(buf1, sysinfo.freqSystemBus / 2), - strmhz(buf2, sysinfo.freqSystemBus)); + strmhz(buf1, sysinfo.freq_systembus / 2), + strmhz(buf2, sysinfo.freq_systembus)); - if (sysinfo.freqLocalBus > LCRR_CLKDIV) { - printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus)); + if (sysinfo.freq_localbus > LCRR_CLKDIV) { + printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freq_localbus)); } else { printf("LBC: unknown (LCRR[CLKDIV] = 0x%02lx)\n", - sysinfo.freqLocalBus); + sysinfo.freq_localbus); } - puts("L1: D-cache 32 KB enabled\n"); - puts(" I-cache 32 KB enabled\n"); + puts("L1: D-cache 32 KiB enabled\n"); + puts(" I-cache 32 KiB enabled\n"); puts("L2: "); if (get_l2cr() & 0x80000000) { @@ -95,7 +95,7 @@ checkcpu(void) #elif defined(CONFIG_MPC8641) puts("512"); #endif - puts(" KB enabled\n"); + puts(" KiB enabled\n"); } else { puts("Disabled\n"); } @@ -131,7 +131,7 @@ get_tbclk(void) sys_info_t sys_info; get_sys_info(&sys_info); - return (sys_info.freqSystemBus + 3L) / 4L; + return (sys_info.freq_systembus + 3L) / 4L; } diff --git a/arch/powerpc/cpu/mpc86xx/ddr-8641.c b/arch/powerpc/cpu/mpc86xx/ddr-8641.c index 92ba26d..33a91f9 100644 --- a/arch/powerpc/cpu/mpc86xx/ddr-8641.c +++ b/arch/powerpc/cpu/mpc86xx/ddr-8641.c @@ -15,7 +15,7 @@ #endif void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, - unsigned int ctrl_num) + unsigned int ctrl_num, int step) { unsigned int i; volatile ccsr_ddr_t *ddr; diff --git a/arch/powerpc/cpu/mpc86xx/speed.c b/arch/powerpc/cpu/mpc86xx/speed.c index ea366ab..854d02b 100644 --- a/arch/powerpc/cpu/mpc86xx/speed.c +++ b/arch/powerpc/cpu/mpc86xx/speed.c @@ -19,7 +19,7 @@ DECLARE_GLOBAL_DATA_PTR; /* used in some defintiions of CONFIG_SYS_CLK_FREQ */ extern unsigned long get_board_sys_clk(unsigned long dummy); -void get_sys_info(sys_info_t *sysInfo) +void get_sys_info(sys_info_t *sys_info) { volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile ccsr_gur_t *gur = &immap->im_gur; @@ -31,7 +31,7 @@ void get_sys_info(sys_info_t *sysInfo) switch (plat_ratio) { case 0x0: - sysInfo->freqSystemBus = 16 * CONFIG_SYS_CLK_FREQ; + sys_info->freq_systembus = 16 * CONFIG_SYS_CLK_FREQ; break; case 0x02: case 0x03: @@ -43,10 +43,10 @@ void get_sys_info(sys_info_t *sysInfo) case 0x0a: case 0x0c: case 0x10: - sysInfo->freqSystemBus = plat_ratio * CONFIG_SYS_CLK_FREQ; + sys_info->freq_systembus = plat_ratio * CONFIG_SYS_CLK_FREQ; break; default: - sysInfo->freqSystemBus = 0; + sys_info->freq_systembus = 0; break; } @@ -55,25 +55,26 @@ void get_sys_info(sys_info_t *sysInfo) switch (e600_ratio) { case 0x10: - sysInfo->freqProcessor = 2 * sysInfo->freqSystemBus; + sys_info->freq_processor = 2 * sys_info->freq_systembus; break; case 0x19: - sysInfo->freqProcessor = 5 * sysInfo->freqSystemBus / 2; + sys_info->freq_processor = 5 * sys_info->freq_systembus / 2; break; case 0x20: - sysInfo->freqProcessor = 3 * sysInfo->freqSystemBus; + sys_info->freq_processor = 3 * sys_info->freq_systembus; break; case 0x39: - sysInfo->freqProcessor = 7 * sysInfo->freqSystemBus / 2; + sys_info->freq_processor = 7 * sys_info->freq_systembus / 2; break; case 0x28: - sysInfo->freqProcessor = 4 * sysInfo->freqSystemBus; + sys_info->freq_processor = 4 * sys_info->freq_systembus; break; case 0x1d: - sysInfo->freqProcessor = 9 * sysInfo->freqSystemBus / 2; + sys_info->freq_processor = 9 * sys_info->freq_systembus / 2; break; default: - sysInfo->freqProcessor = e600_ratio + sysInfo->freqSystemBus; + sys_info->freq_processor = e600_ratio + + sys_info->freq_systembus; break; } @@ -84,10 +85,11 @@ void get_sys_info(sys_info_t *sysInfo) lcrr_div = in_be32(&immap->im_lbc.lcrr) & LCRR_CLKDIV; #endif if (lcrr_div == 2 || lcrr_div == 4 || lcrr_div == 8) { - sysInfo->freqLocalBus = sysInfo->freqSystemBus / (lcrr_div * 2); + sys_info->freq_localbus = sys_info->freq_systembus + / (lcrr_div * 2); } else { /* In case anyone cares what the unknown value is */ - sysInfo->freqLocalBus = lcrr_div; + sys_info->freq_localbus = lcrr_div; } } @@ -102,9 +104,9 @@ int get_clocks(void) sys_info_t sys_info; get_sys_info(&sys_info); - gd->cpu_clk = sys_info.freqProcessor; - gd->bus_clk = sys_info.freqSystemBus; - gd->arch.lbc_clk = sys_info.freqLocalBus; + gd->cpu_clk = sys_info.freq_processor; + gd->bus_clk = sys_info.freq_systembus; + gd->arch.lbc_clk = sys_info.freq_localbus; /* * The base clock for I2C depends on the actual SOC. Unfortunately, @@ -114,9 +116,9 @@ int get_clocks(void) * AN2919. */ #ifdef CONFIG_MPC8610 - gd->arch.i2c1_clk = sys_info.freqSystemBus; + gd->arch.i2c1_clk = sys_info.freq_systembus; #else - gd->arch.i2c1_clk = sys_info.freqSystemBus / 2; + gd->arch.i2c1_clk = sys_info.freq_systembus / 2; #endif gd->arch.i2c2_clk = gd->arch.i2c1_clk; @@ -138,7 +140,7 @@ ulong get_bus_freq(ulong dummy) sys_info_t sys_info; get_sys_info(&sys_info); - val = sys_info.freqSystemBus; + val = sys_info.freq_systembus; return val; } diff --git a/arch/powerpc/cpu/mpc8xx/cpu.c b/arch/powerpc/cpu/mpc8xx/cpu.c index 1550045..5c96b5f 100644 --- a/arch/powerpc/cpu/mpc8xx/cpu.c +++ b/arch/powerpc/cpu/mpc8xx/cpu.c @@ -136,10 +136,8 @@ static int check_CPU (long clock, uint pvr, uint immr) #else printf (" at %s MHz: ", strmhz (buf, clock)); #endif - printf ("%u kB I-Cache %u kB D-Cache", - checkicache () >> 10, - checkdcache () >> 10 - ); + print_size(checkicache(), " I-Cache "); + print_size(checkdcache(), " D-Cache"); /* do we have a FEC (860T/P or 852/859/866/885)? */ @@ -204,10 +202,10 @@ static int check_CPU (long clock, uint pvr, uint immr) printf ("unknown MPC857 (0x%08x)", k); #endif - printf (" at %s MHz:", strmhz (buf, clock)); + printf(" at %s MHz: ", strmhz(buf, clock)); - printf (" %u kB I-Cache", checkicache () >> 10); - printf (" %u kB D-Cache", checkdcache () >> 10); + print_size(checkicache(), " I-Cache "); + print_size(checkdcache(), " D-Cache"); /* lets check and see if we're running on a 862T (or P?) */ @@ -265,10 +263,10 @@ static int check_CPU (long clock, uint pvr, uint immr) if (suf) printf ("PPC823ZTnn%s", suf); - printf (" at %s MHz:", strmhz (buf, clock)); + printf(" at %s MHz: ", strmhz(buf, clock)); - printf (" %u kB I-Cache", checkicache () >> 10); - printf (" %u kB D-Cache", checkdcache () >> 10); + print_size(checkicache(), " I-Cache "); + print_size(checkdcache(), " D-Cache"); /* lets check and see if we're running on a 860T (or P?) */ @@ -321,10 +319,10 @@ static int check_CPU (long clock, uint pvr, uint immr) default: printf ("unknown MPC850 (0x%08x)", k); } - printf (" at %s MHz:", strmhz (buf, clock)); + printf(" at %s MHz: ", strmhz(buf, clock)); - printf (" %u kB I-Cache", checkicache () >> 10); - printf (" %u kB D-Cache", checkdcache () >> 10); + print_size(checkicache(), " I-Cache "); + print_size(checkdcache(), " D-Cache"); /* lets check and see if we're running on a 850T (or P?) */ diff --git a/arch/powerpc/cpu/mpc8xx/video.c b/arch/powerpc/cpu/mpc8xx/video.c index 02cd0de..fc35158 100644 --- a/arch/powerpc/cpu/mpc8xx/video.c +++ b/arch/powerpc/cpu/mpc8xx/video.c @@ -109,7 +109,6 @@ DECLARE_GLOBAL_DATA_PTR; /************************************************************************/ #include <video_font.h> /* Get font data, width and height */ -#include <video_font_data.h> #ifdef CONFIG_VIDEO_LOGO #include <video_logo.h> /* Get logo data, width and height */ @@ -1177,7 +1176,7 @@ static void *video_logo (void) #ifndef CONFIG_FADS /* all normal boards */ /* leave one blank line */ - sprintf (info, "MPC823 CPU at %s MHz, %ld MB RAM, %ld MB Flash", + sprintf(info, "MPC823 CPU at %s MHz, %ld MiB RAM, %ld MiB Flash", strmhz(temp, gd->cpu_clk), gd->ram_size >> 20, gd->bd->bi_flashsize >> 20 ); @@ -1188,7 +1187,7 @@ static void *video_logo (void) video_drawstring (VIDEO_INFO_X, VIDEO_INFO_Y + VIDEO_FONT_HEIGHT, info); - sprintf (info, "2MB FLASH - 8MB DRAM - 4MB SRAM"); + sprintf(info, "2MiB FLASH - 8MiB DRAM - 4MiB SRAM"); video_drawstring (VIDEO_INFO_X, VIDEO_INFO_Y + VIDEO_FONT_HEIGHT * 2, info); #endif diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c index 7369582..c67be4e 100644 --- a/arch/powerpc/cpu/mpc8xxx/cpu.c +++ b/arch/powerpc/cpu/mpc8xxx/cpu.c @@ -79,6 +79,9 @@ static struct cpu_type cpu_type_list[] = { CPU_TYPE_ENTRY(BSC9131, 9131, 1), CPU_TYPE_ENTRY(BSC9132, 9132, 2), CPU_TYPE_ENTRY(BSC9232, 9232, 2), + CPU_TYPE_ENTRY(C291, C291, 1), + CPU_TYPE_ENTRY(C292, C292, 1), + CPU_TYPE_ENTRY(C293, C293, 1), #elif defined(CONFIG_MPC86xx) CPU_TYPE_ENTRY(8610, 8610, 1), CPU_TYPE_ENTRY(8641, 8641, 2), diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c index ff5812d..242eb47 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c @@ -364,7 +364,7 @@ static void set_timing_cfg_3(fsl_ddr_cfg_regs_t *ddr, ddr->timing_cfg_3 = (0 | ((ext_pretoact & 0x1) << 28) - | ((ext_acttopre & 0x2) << 24) + | ((ext_acttopre & 0x3) << 24) | ((ext_acttorw & 0x1) << 22) | ((ext_refrec & 0x1F) << 16) | ((ext_caslat & 0x3) << 12) @@ -681,6 +681,7 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, unsigned int odt_cfg = 0; /* ODT configuration */ unsigned int num_pr; /* Number of posted refreshes */ unsigned int slow = 0; /* DDR will be run less than 1250 */ + unsigned int x4_en = 0; /* x4 DRAM enable */ unsigned int obc_cfg; /* On-The-Fly Burst Chop Cfg */ unsigned int ap_en; /* Address Parity Enable */ unsigned int d_init; /* DRAM data initialization */ @@ -725,6 +726,8 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, ap_en = 0; } + x4_en = popts->x4_en ? 1 : 0; + #if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) /* Use the DDR controller to auto initialize memory. */ d_init = popts->ECC_init_using_memctl; @@ -747,6 +750,7 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, | ((odt_cfg & 0x3) << 21) | ((num_pr & 0xf) << 12) | ((slow & 1) << 11) + | (x4_en << 10) | (qd_en << 9) | (unq_mrs_en << 8) | ((obc_cfg & 0x1) << 6) @@ -1585,8 +1589,8 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, | ((ea & 0xFFF) << 0) /* ending address MSB */ ); } else { - debug("FSLDDR: setting bnds to 0 for inactive CS\n"); - ddr->cs[i].bnds = 0; + /* setting bnds to 0xffffffff for inactive CS */ + ddr->cs[i].bnds = 0xffffffff; } debug("FSLDDR: cs[%d]_bnds = 0x%08x\n", i, ddr->cs[i].bnds); @@ -1638,5 +1642,10 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, set_ddr_sdram_rcw(ddr, popts, common_dimm); +#ifdef CONFIG_SYS_FSL_DDR_EMU + /* disble DDR training for emulator */ + ddr->debug[2] = 0x00000400; + ddr->debug[4] = 0xff800000; +#endif return check_fsl_memctl_config_regs(ddr); } diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h b/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h index 4dd55fc..c173a5a 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h +++ b/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h @@ -96,7 +96,7 @@ unsigned int check_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr); /* processor specific function */ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, - unsigned int ctrl_num); + unsigned int ctrl_num, int step); /* board specific function */ int fsl_ddr_get_dimm_params(dimm_params_t *pdimm, diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c index 3e7c269..b67158c 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c @@ -129,6 +129,7 @@ ddr_compute_dimm_parameters(const ddr3_spd_eeprom_t *spd, pdimm->ec_sdram_width = 0; pdimm->data_width = pdimm->primary_sdram_width + pdimm->ec_sdram_width; + pdimm->device_width = 1 << ((spd->organization & 0x7) + 2); /* These are the types defined by the JEDEC DDR3 SPD spec */ pdimm->mirrored_dimm = 0; diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c b/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c index 1ed6c77..260fce5 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c @@ -205,6 +205,7 @@ static void fsl_ddr_dimm_parameters_edit(fsl_ddr_info_t *pinfo, DIMM_PARM(primary_sdram_width), DIMM_PARM(ec_sdram_width), DIMM_PARM(registered_dimm), + DIMM_PARM(device_width), DIMM_PARM(n_row_addr), DIMM_PARM(n_col_addr), @@ -263,6 +264,7 @@ static void print_dimm_parameters(const dimm_params_t *pdimm) DIMM_PARM(primary_sdram_width), DIMM_PARM(ec_sdram_width), DIMM_PARM(registered_dimm), + DIMM_PARM(device_width), DIMM_PARM(n_row_addr), DIMM_PARM(n_col_addr), @@ -443,6 +445,7 @@ static void fsl_ddr_options_edit(fsl_ddr_info_t *pinfo, CTRL_OPTIONS(twoT_en), CTRL_OPTIONS(threeT_en), CTRL_OPTIONS(ap_en), + CTRL_OPTIONS(x4_en), CTRL_OPTIONS(bstopre), CTRL_OPTIONS(wrlvl_override), CTRL_OPTIONS(wrlvl_sample), @@ -687,6 +690,7 @@ static void print_memctl_options(const memctl_options_t *popts) CTRL_OPTIONS(threeT_en), CTRL_OPTIONS(registered_dimm_en), CTRL_OPTIONS(ap_en), + CTRL_OPTIONS(x4_en), CTRL_OPTIONS(bstopre), CTRL_OPTIONS(wrlvl_override), CTRL_OPTIONS(wrlvl_sample), diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c index e958e13..56128a7 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c @@ -218,12 +218,16 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, if (dimm_params[i].n_ranks) { if (dimm_params[i].registered_dimm) { temp1 = 1; +#ifndef CONFIG_SPL_BUILD printf("Detected RDIMM %s\n", dimm_params[i].mpart); +#endif } else { temp2 = 1; +#ifndef CONFIG_SPL_BUILD printf("Detected UDIMM %s\n", dimm_params[i].mpart); +#endif } } } diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/main.c b/arch/powerpc/cpu/mpc8xxx/ddr/main.c index 7a8636d..842bf19 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/main.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/main.c @@ -25,10 +25,6 @@ void fsl_ddr_set_lawbar( unsigned int ctrl_num); void fsl_ddr_set_intl3r(const unsigned int granule_size); -/* processor specific function */ -extern void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, - unsigned int ctrl_num); - #if defined(SPD_EEPROM_ADDRESS) || \ defined(SPD_EEPROM_ADDRESS1) || defined(SPD_EEPROM_ADDRESS2) || \ defined(SPD_EEPROM_ADDRESS3) || defined(SPD_EEPROM_ADDRESS4) @@ -365,9 +361,11 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step, { unsigned int i, j; unsigned long long total_mem = 0; + int assert_reset; fsl_ddr_cfg_regs_t *ddr_reg = pinfo->fsl_ddr_config_reg; common_timing_params_t *timing_params = pinfo->common_timing_params; + assert_reset = board_need_mem_reset(); /* data bus width capacity adjust shift amount */ unsigned int dbw_capacity_adjust[CONFIG_NUM_DDR_CONTROLLERS]; @@ -462,7 +460,20 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step, timing_params[i].all_DIMMs_registered, &pinfo->memctl_opts[i], pinfo->dimm_params[i], i); + /* + * For RDIMMs, JEDEC spec requires clocks to be stable + * before reset signal is deasserted. For the boards + * using fixed parameters, this function should be + * be called from board init file. + */ + if (timing_params[i].all_DIMMs_registered) + assert_reset = 1; } + if (assert_reset) { + debug("Asserting mem reset\n"); + board_assert_mem_reset(); + } + case STEP_ASSIGN_ADDRESSES: /* STEP 5: Assign addresses to chip selects */ check_interleaving_options(pinfo); @@ -504,7 +515,13 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step, fsl_ddr_cfg_regs_t *reg = &ddr_reg[i]; if (reg->cs[j].config & 0x80000000) { unsigned int end; - end = reg->cs[j].bnds & 0xFFF; + /* + * 0xfffffff is a special value we put + * for unused bnds + */ + if (reg->cs[j].bnds == 0xffffffff) + continue; + end = reg->cs[j].bnds & 0xffff; if (end > max_end) { max_end = end; } @@ -531,6 +548,7 @@ phys_size_t fsl_ddr_sdram(void) unsigned int law_memctl = LAW_TRGT_IF_DDR_1; unsigned long long total_memory; fsl_ddr_info_t info; + int deassert_reset; /* Reset info structure. */ memset(&info, 0, sizeof(fsl_ddr_info_t)); @@ -559,7 +577,21 @@ phys_size_t fsl_ddr_sdram(void) } } - /* Program configuration registers. */ + /* + * Program configuration registers. + * JEDEC specs requires clocks to be stable before deasserting reset + * for RDIMMs. Clocks start after chip select is enabled and clock + * control register is set. During step 1, all controllers have their + * registers set but not enabled. Step 2 proceeds after deasserting + * reset through board FPGA or GPIO. + * For non-registered DIMMs, initialization can go through but it is + * also OK to follow the same flow. + */ + deassert_reset = board_need_mem_reset(); + for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { + if (info.common_timing_params[i].all_DIMMs_registered) + deassert_reset = 1; + } for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { debug("Programming controller %u\n", i); if (info.common_timing_params[i].ndimms_present == 0) { @@ -567,8 +599,22 @@ phys_size_t fsl_ddr_sdram(void) "skipping programming\n", i); continue; } - - fsl_ddr_set_memctl_regs(&(info.fsl_ddr_config_reg[i]), i); + /* + * The following call with step = 1 returns before enabling + * the controller. It has to finish with step = 2 later. + */ + fsl_ddr_set_memctl_regs(&(info.fsl_ddr_config_reg[i]), i, + deassert_reset ? 1 : 0); + } + if (deassert_reset) { + /* Use board FPGA or GPIO to deassert reset signal */ + debug("Deasserting mem reset\n"); + board_deassert_mem_reset(); + for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { + /* Call with step = 2 to continue initialization */ + fsl_ddr_set_memctl_regs(&(info.fsl_ddr_config_reg[i]), + i, 2); + } } /* program LAWs */ @@ -637,7 +683,8 @@ phys_size_t fsl_ddr_sdram(void) #if !defined(CONFIG_PHYS_64BIT) /* Check for 4G or more. Bad. */ if (total_memory >= (1ull << 32)) { - printf("Detected %lld MB of memory\n", total_memory >> 20); + puts("Detected "); + print_size(total_memory, " of memory\n"); printf(" This U-Boot only supports < 4G of DDR\n"); printf(" You could rebuild it with CONFIG_PHYS_64BIT\n"); printf(" "); /* re-align to match init_func_ram print */ diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/options.c b/arch/powerpc/cpu/mpc8xxx/ddr/options.c index 26369e0..30cdca4 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/options.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/options.c @@ -700,6 +700,8 @@ unsigned int populate_memctl_options(int all_DIMMs_registered, } #endif + popts->x4_en = (pdimm[0].device_width == 4) ? 1 : 0; + /* Choose burst length. */ #if defined(CONFIG_FSL_DDR3) #if defined(CONFIG_E500MC) diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c index 89966e0..eb7cbbc 100644 --- a/arch/powerpc/cpu/mpc8xxx/fdt.c +++ b/arch/powerpc/cpu/mpc8xxx/fdt.c @@ -121,11 +121,8 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd) { const char *modes[] = { "host", "peripheral", "otg" }; const char *phys[] = { "ulpi", "utmi" }; - const char *mode = NULL; - const char *phy_type = NULL; const char *dr_mode_type = NULL; const char *dr_phy_type = NULL; - char usb1_defined = 0; int usb_mode_off = -1; int usb_phy_off = -1; char str[5]; @@ -159,12 +156,6 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd) dr_mode_type = modes[mode_idx]; dr_phy_type = phys[phy_idx]; - /* use usb_dr_mode and usb_phy_type if - usb1_defined = 0; these variables are to - be deprecated */ - if (!strcmp(str, "usb1")) - usb1_defined = 1; - if (mode_idx < 0 && phy_idx < 0) { printf("WARNING: invalid phy or mode\n"); return; @@ -183,19 +174,6 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd) if (usb_phy_off < 0) return; } - - if (!usb1_defined) { - int usb_off = -1; - mode = getenv("usb_dr_mode"); - phy_type = getenv("usb_phy_type"); - if (mode || phy_type) { - printf("WARNING: usb_dr_mode and usb_phy_type " - "are to be deprecated soon. Use " - "hwconfig to set these values instead!!\n"); - fdt_fixup_usb_mode_phy_type(blob, mode, - phy_type, usb_off); - } - } } #endif /* defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) */ diff --git a/arch/powerpc/cpu/mpc8xxx/law.c b/arch/powerpc/cpu/mpc8xxx/law.c index 89a561e..a401083 100644 --- a/arch/powerpc/cpu/mpc8xxx/law.c +++ b/arch/powerpc/cpu/mpc8xxx/law.c @@ -76,7 +76,8 @@ void disable_law(u8 idx) return; } -#if !defined(CONFIG_NAND_SPL) && !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_NAND_SPL) && \ + (!defined(CONFIG_SPL_BUILD) || !defined(CONFIG_SPL_INIT_MINIMAL)) static int get_law_entry(u8 i, struct law_entry *e) { u32 lawar; @@ -106,7 +107,8 @@ int set_next_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id) return idx; } -#if !defined(CONFIG_NAND_SPL) && !defined(CONFIG_SPL_BUILD) +#if !defined(CONFIG_NAND_SPL) && \ + (!defined(CONFIG_SPL_BUILD) || !defined(CONFIG_SPL_INIT_MINIMAL)) int set_last_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id) { u32 idx; diff --git a/arch/powerpc/cpu/ppc4xx/4xx_pci.c b/arch/powerpc/cpu/ppc4xx/4xx_pci.c index 2ca355b..5584e0f 100644 --- a/arch/powerpc/cpu/ppc4xx/4xx_pci.c +++ b/arch/powerpc/cpu/ppc4xx/4xx_pci.c @@ -1,26 +1,5 @@ -/*-----------------------------------------------------------------------------+ - * This source code is dual-licensed. You may use it under the terms of - * the GNU General Public license version 2, or under the license below. - * - * This source code has been made available to you by IBM on an AS-IS - * basis. Anyone receiving this source is licensed under IBM - * copyrights to use it in any way he or she deems fit, including - * copying it, modifying it, compiling it, and redistributing it either - * with or without modifications. No license under IBM patents or - * patent applications is to be implied by the copyright license. - * - * Any user of this software should understand that IBM cannot provide - * technical support for this software and will not be responsible for - * any consequences resulting from the use of this software. - * - * Any person who transfers this source code or any derivative work - * must include the IBM copyright notice, this paragraph, and the - * preceding two paragraphs in the transferred software. - * - * COPYRIGHT I B M CORPORATION 1995 - * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M - *-----------------------------------------------------------------------------*/ -/*----------------------------------------------------------------------------+ +/* + * SPDX-License-Identifier: GPL-2.0 ibm-pibs * * File Name: 405gp_pci.c * diff --git a/arch/powerpc/cpu/ppc4xx/4xx_uart.c b/arch/powerpc/cpu/ppc4xx/4xx_uart.c index 1ad19ab..50c28a0 100644 --- a/arch/powerpc/cpu/ppc4xx/4xx_uart.c +++ b/arch/powerpc/cpu/ppc4xx/4xx_uart.c @@ -5,30 +5,7 @@ * (C) Copyright 2010 * Stefan Roese, DENX Software Engineering, sr@denx.de. * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * This source code is dual-licensed. You may use it under the terms of the - * GNU General Public License version 2, or under the license below. - * - * This source code has been made available to you by IBM on an AS-IS - * basis. Anyone receiving this source is licensed under IBM - * copyrights to use it in any way he or she deems fit, including - * copying it, modifying it, compiling it, and redistributing it either - * with or without modifications. No license under IBM patents or - * patent applications is to be implied by the copyright license. - * - * Any user of this software should understand that IBM cannot provide - * technical support for this software and will not be responsible for - * any consequences resulting from the use of this software. - * - * Any person who transfers this source code or any derivative work - * must include the IBM copyright notice, this paragraph, and the - * preceding two paragraphs in the transferred software. - * - * COPYRIGHT I B M CORPORATION 1995 - * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M + * SPDX-License-Identifier: GPL-2.0 ibm-pibs */ #include <common.h> @@ -40,7 +17,7 @@ DECLARE_GLOBAL_DATA_PTR; -#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \ +#if defined(CONFIG_405GP) || \ defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \ defined(CONFIG_405EX) || defined(CONFIG_440) @@ -91,7 +68,7 @@ DECLARE_GLOBAL_DATA_PTR; #define UDIV_SUBTRACT 0 #define UART0_SDR SDR0_UART0 #define UART1_SDR SDR0_UART1 -#else /* CONFIG_405GP || CONFIG_405CR */ +#else /* CONFIG_405GP */ #define CR0_MASK 0x00001fff #define CR0_EXTCLK_ENA 0x000000c0 #define CR0_UDIV_POS 1 @@ -196,7 +173,7 @@ int get_serial_clock(void) * Let's handle this in some #ifdef's for the SoC's. */ -#if defined(CONFIG_405CR) || defined(CONFIG_405GP) +#if defined(CONFIG_405GP) reg = mfdcr(CPC0_CR0) & ~CR0_MASK; #ifdef CONFIG_SYS_EXT_SERIAL_CLOCK clk = CONFIG_SYS_EXT_SERIAL_CLOCK; @@ -223,7 +200,7 @@ int get_serial_clock(void) #else clk = CONFIG_SYS_BASE_BAUD * 16; #endif -#endif /* CONFIG_405CR */ +#endif #if defined(CONFIG_405EP) { @@ -288,4 +265,4 @@ int get_serial_clock(void) return clk; } -#endif /* CONFIG_405GP || CONFIG_405CR */ +#endif /* CONFIG_405GP */ diff --git a/arch/powerpc/cpu/ppc4xx/cpu.c b/arch/powerpc/cpu/ppc4xx/cpu.c index fe05098..d1fc7f3 100644 --- a/arch/powerpc/cpu/ppc4xx/cpu.c +++ b/arch/powerpc/cpu/ppc4xx/cpu.c @@ -320,25 +320,9 @@ int checkcpu (void) puts("405GP Rev. D"); break; -#ifdef CONFIG_405GP - case PVR_405GP_RE: /* 405GP rev E and 405CR rev C have same PVR */ + case PVR_405GP_RE: puts("405GP Rev. E"); break; -#endif - - case PVR_405CR_RA: - puts("405CR Rev. A"); - break; - - case PVR_405CR_RB: - puts("405CR Rev. B"); - break; - -#ifdef CONFIG_405CR - case PVR_405CR_RC: /* 405GP rev E and 405CR rev C have same PVR */ - puts("405CR Rev. C"); - break; -#endif case PVR_405GPR_RB: puts("405GPr Rev. B"); @@ -647,12 +631,12 @@ int checkcpu (void) #endif #if defined(CONFIG_405EP) || defined(CONFIG_405EZ) || defined(CONFIG_405EX) - printf (" 16 kB I-Cache 16 kB D-Cache"); + printf(" 16 KiB I-Cache 16 KiB D-Cache"); #elif defined(CONFIG_440) - printf (" 32 kB I-Cache 32 kB D-Cache"); + printf(" 32 KiB I-Cache 32 KiB D-Cache"); #else - printf (" 16 kB I-Cache %d kB D-Cache", - ((pvr | 0x00000001) == PVR_405GPR_RB) ? 16 : 8); + printf(" 16 KiB I-Cache %d KiB D-Cache", + ((pvr | 0x00000001) == PVR_405GPR_RB) ? 16 : 8); #endif #endif /* !defined(CONFIG_405) */ diff --git a/arch/powerpc/cpu/ppc4xx/cpu_init.c b/arch/powerpc/cpu/ppc4xx/cpu_init.c index d53d882..d465dcd 100644 --- a/arch/powerpc/cpu/ppc4xx/cpu_init.c +++ b/arch/powerpc/cpu/ppc4xx/cpu_init.c @@ -326,7 +326,7 @@ cpu_init_f (void) * External Bus Controller (EBC) Setup */ #if (defined(CONFIG_SYS_EBC_PB0AP) && defined(CONFIG_SYS_EBC_PB0CR)) -#if (defined(CONFIG_405GP) || defined(CONFIG_405CR) || \ +#if (defined(CONFIG_405GP) || \ defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \ defined(CONFIG_405EX) || defined(CONFIG_405)) /* diff --git a/arch/powerpc/cpu/ppc4xx/miiphy.c b/arch/powerpc/cpu/ppc4xx/miiphy.c index 297155f..e4a9db6 100644 --- a/arch/powerpc/cpu/ppc4xx/miiphy.c +++ b/arch/powerpc/cpu/ppc4xx/miiphy.c @@ -1,25 +1,6 @@ -/*-----------------------------------------------------------------------------+ - | This source code is dual-licensed. You may use it under the terms of the - | GNU General Public License version 2, or under the license below. - | - | This source code has been made available to you by IBM on an AS-IS - | basis. Anyone receiving this source is licensed under IBM - | copyrights to use it in any way he or she deems fit, including - | copying it, modifying it, compiling it, and redistributing it either - | with or without modifications. No license under IBM patents or - | patent applications is to be implied by the copyright license. - | - | Any user of this software should understand that IBM cannot provide - | technical support for this software and will not be responsible for - | any consequences resulting from the use of this software. - | - | Any person who transfers this source code or any derivative work - | must include the IBM copyright notice, this paragraph, and the - | preceding two paragraphs in the transferred software. - | - | COPYRIGHT I B M CORPORATION 1995 - | LICENSED MATERIAL - PROGRAM PROPERTY OF I B M - +-----------------------------------------------------------------------------*/ +/* + * SPDX-License-Identifier: GPL-2.0 ibm-pibs + */ /*-----------------------------------------------------------------------------+ | | File Name: miiphy.c diff --git a/arch/powerpc/cpu/ppc4xx/speed.c b/arch/powerpc/cpu/ppc4xx/speed.c index 3345e73..7e077d5 100644 --- a/arch/powerpc/cpu/ppc4xx/speed.c +++ b/arch/powerpc/cpu/ppc4xx/speed.c @@ -21,7 +21,7 @@ DECLARE_GLOBAL_DATA_PTR; #define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) -#if defined(CONFIG_405GP) || defined(CONFIG_405CR) +#if defined(CONFIG_405GP) void get_sys_info (PPC4xx_SYS_INFO * sysInfo) { @@ -1184,7 +1184,7 @@ ulong get_bus_freq (ulong dummy) { ulong val; -#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \ +#if defined(CONFIG_405GP) || \ defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \ defined(CONFIG_405EX) || defined(CONFIG_405) || \ defined(CONFIG_440) diff --git a/arch/powerpc/cpu/ppc4xx/start.S b/arch/powerpc/cpu/ppc4xx/start.S index 57ae1d3..d9d8cbf 100644 --- a/arch/powerpc/cpu/ppc4xx/start.S +++ b/arch/powerpc/cpu/ppc4xx/start.S @@ -6,46 +6,7 @@ * Copyright (c) 2008 Nuovation System Designs, LLC * Grant Erickson <gerickson@nuovations.com> * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -/*------------------------------------------------------------------------------+ - * This source code is dual-licensed. You may use it under the terms of the - * GNU General Public License version 2, or under the license below. - * - * This source code has been made available to you by IBM on an AS-IS - * basis. Anyone receiving this source is licensed under IBM - * copyrights to use it in any way he or she deems fit, including - * copying it, modifying it, compiling it, and redistributing it either - * with or without modifications. No license under IBM patents or - * patent applications is to be implied by the copyright license. - * - * Any user of this software should understand that IBM cannot provide - * technical support for this software and will not be responsible for - * any consequences resulting from the use of this software. - * - * Any person who transfers this source code or any derivative work - * must include the IBM copyright notice, this paragraph, and the - * preceding two paragraphs in the transferred software. - * - * COPYRIGHT I B M CORPORATION 1995 - * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M - *------------------------------------------------------------------------------- + * SPDX-License-Identifier: GPL-2.0 ibm-pibs */ /* @@ -833,7 +794,7 @@ _start: #endif /* CONFIG_440 */ /*****************************************************************************/ -#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \ +#if defined(CONFIG_405GP) || \ defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \ defined(CONFIG_405EX) || defined(CONFIG_405) /*----------------------------------------------------------------------- */ @@ -1103,7 +1064,7 @@ _start: #endif /* CONFIG_NAND_SPL */ -#endif /* CONFIG_405GP || CONFIG_405CR || CONFIG_405 || CONFIG_405EP */ +#endif /* CONFIG_405GP || CONFIG_405 || CONFIG_405EP */ /*----------------------------------------------------------------------- */ diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index 7ed93ac..15e44de 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -67,6 +67,8 @@ #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 #define CONFIG_SYS_FSL_RMU #define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM 2 +#define CONFIG_SYS_FSL_ERRATUM_I2C_A004447 +#define CONFIG_SYS_FSL_A004447_SVR_REV 0x00 #elif defined(CONFIG_MPC8555) #define CONFIG_MAX_CPUS 1 @@ -131,7 +133,10 @@ #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY #define CONFIG_SYS_FSL_ERRATUM_IFC_A002769 #define CONFIG_SYS_FSL_ERRATUM_P1010_A003549 +#define CONFIG_SYS_FSL_ERRATUM_SEC_A003571 #define CONFIG_SYS_FSL_ERRATUM_IFC_A003399 +#define CONFIG_SYS_FSL_ERRATUM_I2C_A004447 +#define CONFIG_SYS_FSL_A004447_SVR_REV 0x10 /* P1011 is single core version of P1020 */ #elif defined(CONFIG_P1011) @@ -249,6 +254,8 @@ #define CONFIG_SYS_FM_MURAM_SIZE 0x10000 #define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2" #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff600000 +#define CONFIG_SYS_FSL_ERRATUM_I2C_A004447 +#define CONFIG_SYS_FSL_A004447_SVR_REV 0x11 /* P1024 is lower end variant of P1020 */ #elif defined(CONFIG_P1024) @@ -303,6 +310,7 @@ #elif defined(CONFIG_PPC_P2041) /* also supports P2040 */ #define CONFIG_SYS_FSL_QORIQ_CHASSIS1 +#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ #define CONFIG_MAX_CPUS 4 #define CONFIG_SYS_FSL_NUM_CC_PLLS 2 #define CONFIG_SYS_FSL_NUM_LAWS 32 @@ -333,9 +341,12 @@ #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000 #define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034 #define CONFIG_SYS_FSL_ERRATUM_A004849 +#define CONFIG_SYS_FSL_ERRATUM_I2C_A004447 +#define CONFIG_SYS_FSL_A004447_SVR_REV 0x11 #elif defined(CONFIG_PPC_P3041) #define CONFIG_SYS_FSL_QORIQ_CHASSIS1 +#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ #define CONFIG_MAX_CPUS 4 #define CONFIG_SYS_FSL_NUM_CC_PLLS 2 #define CONFIG_SYS_FSL_NUM_LAWS 32 @@ -366,9 +377,13 @@ #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000 #define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034 #define CONFIG_SYS_FSL_ERRATUM_A004849 +#define CONFIG_SYS_FSL_ERRATUM_A005812 +#define CONFIG_SYS_FSL_ERRATUM_I2C_A004447 +#define CONFIG_SYS_FSL_A004447_SVR_REV 0x20 #elif defined(CONFIG_PPC_P4080) /* also supports P4040 */ #define CONFIG_SYS_FSL_QORIQ_CHASSIS1 +#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ #define CONFIG_MAX_CPUS 8 #define CONFIG_SYS_FSL_NUM_CC_PLLS 4 #define CONFIG_SYS_FSL_NUM_LAWS 32 @@ -410,10 +425,14 @@ #define CONFIG_SYS_FSL_ERRATUM_A004849 #define CONFIG_SYS_FSL_ERRATUM_A004580 #define CONFIG_SYS_P4080_ERRATUM_PCIE_A003 +#define CONFIG_SYS_FSL_ERRATUM_A005812 +#define CONFIG_SYS_FSL_ERRATUM_I2C_A004447 +#define CONFIG_SYS_FSL_A004447_SVR_REV 0x20 #elif defined(CONFIG_PPC_P5020) /* also supports P5010 */ #define CONFIG_SYS_PPC64 /* 64-bit core */ #define CONFIG_SYS_FSL_QORIQ_CHASSIS1 +#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ #define CONFIG_MAX_CPUS 2 #define CONFIG_SYS_FSL_NUM_CC_PLLS 2 #define CONFIG_SYS_FSL_NUM_LAWS 32 @@ -440,10 +459,13 @@ #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV 0x10 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xc0000000 #define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034 +#define CONFIG_SYS_FSL_ERRATUM_I2C_A004447 +#define CONFIG_SYS_FSL_A004447_SVR_REV 0x20 #elif defined(CONFIG_PPC_P5040) #define CONFIG_SYS_PPC64 #define CONFIG_SYS_FSL_QORIQ_CHASSIS1 +#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ #define CONFIG_MAX_CPUS 4 #define CONFIG_SYS_FSL_NUM_CC_PLLS 3 #define CONFIG_SYS_FSL_NUM_LAWS 32 @@ -469,6 +491,7 @@ #define CONFIG_SYS_FSL_ERRATUM_A004510 #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV 0x10 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000 +#define CONFIG_SYS_FSL_ERRATUM_A005812 #elif defined(CONFIG_BSC9131) #define CONFIG_MAX_CPUS 1 @@ -492,12 +515,18 @@ #define CONFIG_TSECV2 #define CONFIG_SYS_FSL_SEC_COMPAT 4 #define CONFIG_NUM_DDR_CONTROLLERS 2 +#define CONFIG_SYS_FSL_DSP_DDR_ADDR 0x40000000 +#define CONFIG_SYS_FSL_DSP_M2_RAM_ADDR 0xb0000000 +#define CONFIG_SYS_FSL_DSP_M3_RAM_ADDR 0xc0000000 +#define CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT 0xff600000 #define CONFIG_SYS_FSL_IFC_BANK_COUNT 3 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_NAND_FSL_IFC #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define CONFIG_SYS_FSL_ESDHC_P1010_BROKEN_SDCLK #define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2" +#define CONFIG_SYS_FSL_ERRATUM_I2C_A004447 +#define CONFIG_SYS_FSL_A004447_SVR_REV 0x11 #elif defined(CONFIG_PPC_T4240) || defined(CONFIG_PPC_T4160) #define CONFIG_E6500 @@ -523,6 +552,8 @@ #endif #define CONFIG_SYS_FSL_NUM_CC_PLLS 5 #define CONFIG_SYS_FSL_NUM_LAWS 32 +#define CONFIG_SYS_FSL_SRDS_1 +#define CONFIG_SYS_FSL_SRDS_2 #define CONFIG_SYS_FSL_SRDS_3 #define CONFIG_SYS_FSL_SRDS_4 #define CONFIG_SYS_FSL_SEC_COMPAT 4 @@ -536,6 +567,7 @@ #define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 +#define CONFIG_SYS_FSL_SRIO_LIODN #define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY #define CONFIG_SYS_FSL_ERRATUM_A004468 @@ -552,6 +584,8 @@ #define CONFIG_SYS_FSL_QORIQ_CHASSIS2 /* Freescale Chassis generation 2 */ #define CONFIG_SYS_FSL_QMAN_V3 /* QMAN version 3 */ #define CONFIG_SYS_FSL_NUM_LAWS 32 +#define CONFIG_SYS_FSL_SRDS_1 +#define CONFIG_SYS_FSL_SRDS_2 #define CONFIG_SYS_FSL_SEC_COMPAT 4 #define CONFIG_SYS_NUM_FMAN 1 #define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_4_7 @@ -576,6 +610,7 @@ #define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 +#define CONFIG_SYS_FSL_SRIO_LIODN #else #define CONFIG_MAX_CPUS 2 #define CONFIG_SYS_FSL_CORES_PER_CLUSTER 2 @@ -612,6 +647,18 @@ #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY #define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 +#elif defined(CONFIG_PPC_C29X) +#define CONFIG_MAX_CPUS 1 +#define CONFIG_FSL_SDHC_V2_3 +#define CONFIG_SYS_FSL_NUM_LAWS 12 +#define CONFIG_SYS_PPC_E500_DEBUG_TLB 3 +#define CONFIG_TSECV2_1 +#define CONFIG_SYS_FSL_SEC_COMPAT 6 +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +#define CONFIG_NUM_DDR_CONTROLLERS 1 +#define CONFIG_SYS_FSL_IFC_BANK_COUNT 8 +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 + #else #error Processor type not defined for this platform #endif diff --git a/arch/powerpc/include/asm/fsl_ddr_dimm_params.h b/arch/powerpc/include/asm/fsl_ddr_dimm_params.h index ffe4db8..bd312ad 100644 --- a/arch/powerpc/include/asm/fsl_ddr_dimm_params.h +++ b/arch/powerpc/include/asm/fsl_ddr_dimm_params.h @@ -26,6 +26,7 @@ typedef struct dimm_params_s { unsigned int primary_sdram_width; unsigned int ec_sdram_width; unsigned int registered_dimm; + unsigned int device_width; /* x4, x8, x16 components */ /* SDRAM device parameters */ unsigned int n_row_addr; diff --git a/arch/powerpc/include/asm/fsl_ddr_sdram.h b/arch/powerpc/include/asm/fsl_ddr_sdram.h index 640d329..f4eec82 100644 --- a/arch/powerpc/include/asm/fsl_ddr_sdram.h +++ b/arch/powerpc/include/asm/fsl_ddr_sdram.h @@ -277,6 +277,7 @@ typedef struct memctl_options_s { unsigned int mirrored_dimm; unsigned int quad_rank_present; unsigned int ap_en; /* address parity enable for RDIMM */ + unsigned int x4_en; /* enable x4 devices */ /* Global Timing Parameters */ unsigned int cas_latency_override; @@ -330,9 +331,31 @@ extern phys_size_t fsl_ddr_sdram(void); extern phys_size_t fsl_ddr_sdram_size(void); extern int fsl_use_spd(void); extern void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, - unsigned int ctrl_num); + unsigned int ctrl_num, int step); u32 fsl_ddr_get_intl3r(void); +static void __board_assert_mem_reset(void) +{ +} + +static void __board_deassert_mem_reset(void) +{ +} + +void board_assert_mem_reset(void) + __attribute__((weak, alias("__board_assert_mem_reset"))); + +void board_deassert_mem_reset(void) + __attribute__((weak, alias("__board_deassert_mem_reset"))); + +static int __board_need_mem_reset(void) +{ + return 0; +} + +int board_need_mem_reset(void) + __attribute__((weak, alias("__board_need_mem_reset"))); + /* * The 85xx boards have a common prototype for fixed_sdram so put the * declaration here. diff --git a/arch/powerpc/include/asm/fsl_i2c.h b/arch/powerpc/include/asm/fsl_i2c.h index 4f71341..d6537fd 100644 --- a/arch/powerpc/include/asm/fsl_i2c.h +++ b/arch/powerpc/include/asm/fsl_i2c.h @@ -54,6 +54,7 @@ typedef struct fsl_i2c { #define I2C_CR_MTX 0x10 #define I2C_CR_TXAK 0x08 #define I2C_CR_RSTA 0x04 +#define I2C_CR_BIT6 0x02 /* required for workaround A004447 */ #define I2C_CR_BCST 0x01 u8 sr; /* I2C status register */ diff --git a/arch/powerpc/include/asm/fsl_law.h b/arch/powerpc/include/asm/fsl_law.h index bea1636..37d3a22 100644 --- a/arch/powerpc/include/asm/fsl_law.h +++ b/arch/powerpc/include/asm/fsl_law.h @@ -82,7 +82,7 @@ enum law_trgt_if { #ifndef CONFIG_MPC8641 LAW_TRGT_IF_PCIE_1 = 0x02, #endif -#if defined(CONFIG_BSC9131) +#if defined(CONFIG_BSC9131) || defined(CONFIG_BSC9132) LAW_TRGT_IF_OCN_DSP = 0x03, #else #if !defined(CONFIG_MPC8572) && !defined(CONFIG_P2020) @@ -92,9 +92,14 @@ enum law_trgt_if { LAW_TRGT_IF_LBC = 0x04, LAW_TRGT_IF_CCSR = 0x08, LAW_TRGT_IF_DSP_CCSR = 0x09, + LAW_TRGT_IF_PLATFORM_SRAM = 0x0a, LAW_TRGT_IF_DDR_INTRLV = 0x0b, LAW_TRGT_IF_RIO = 0x0c, +#if defined(CONFIG_BSC9132) + LAW_TRGT_IF_CLASS_DSP = 0x0d, +#else LAW_TRGT_IF_RIO_2 = 0x0d, +#endif LAW_TRGT_IF_DPAA_SWP_SRAM = 0x0e, LAW_TRGT_IF_DDR = 0x0f, LAW_TRGT_IF_DDR_2 = 0x16, /* 2nd controller */ diff --git a/arch/powerpc/include/asm/fsl_liodn.h b/arch/powerpc/include/asm/fsl_liodn.h index 3f543d9..44bc88d 100644 --- a/arch/powerpc/include/asm/fsl_liodn.h +++ b/arch/powerpc/include/asm/fsl_liodn.h @@ -29,6 +29,13 @@ struct srio_liodn_id_table { + CONFIG_SYS_MPC85xx_GUTS_OFFSET + CONFIG_SYS_CCSRBAR, \ } +#define SET_SRIO_LIODN_BASE(port, id_a) \ + { .id = { id_a }, .num_ids = 1, .portid = port, \ + .reg_offset[0] = offsetof(struct ccsr_rio, liodn) \ + + (port - 1) * 0x200 \ + + CONFIG_SYS_FSL_SRIO_ADDR, \ + } + struct liodn_id_table { const char * compat; u32 id[2]; diff --git a/arch/powerpc/include/asm/fsl_pci.h b/arch/powerpc/include/asm/fsl_pci.h index c740da3..749411c 100644 --- a/arch/powerpc/include/asm/fsl_pci.h +++ b/arch/powerpc/include/asm/fsl_pci.h @@ -1,5 +1,5 @@ /* - * Copyright 2007,2009-2011 Freescale Semiconductor, Inc. + * Copyright 2007,2009-2012 Freescale Semiconductor, Inc. * * SPDX-License-Identifier: GPL-2.0+ */ @@ -13,6 +13,34 @@ #define PEX_IP_BLK_REV_2_2 0x02080202 #define PEX_IP_BLK_REV_2_3 0x02080203 +#define PEX_IP_BLK_REV_3_0 0x02080300 + +/* Freescale-specific PCI config registers */ +#define FSL_PCI_PBFR 0x44 + +#ifdef CONFIG_SYS_FSL_PCI_VER_3_X +/* Currently only the PCIe capability is used, so hardcode the offset. + * if more capabilities need to be justified, the capability link method + * should be applied here + */ +#define FSL_PCIE_CAP_ID 0x70 +#define PCI_DCR 0x78 /* PCIe Device Control Register */ +#define PCI_DSR 0x7a /* PCIe Device Status Register */ +#define PCI_LSR 0x82 /* PCIe Link Status Register */ +#define PCI_LCR 0x80 /* PCIe Link Control Register */ +#else +#define FSL_PCIE_CAP_ID 0x4c +#define PCI_DCR 0x54 /* PCIe Device Control Register */ +#define PCI_DSR 0x56 /* PCIe Device Status Register */ +#define PCI_LSR 0x5e /* PCIe Link Status Register */ +#define PCI_LCR 0x5c /* PCIe Link Control Register */ +#endif + +#define FSL_PCIE_CFG_RDY 0x4b0 +#define FSL_PROG_IF_AGENT 0x1 + +#define PCI_LTSSM 0x404 /* PCIe Link Training, Status State Machine */ +#define PCI_LTSSM_L0 0x16 /* L0 state */ int fsl_setup_hose(struct pci_controller *hose, unsigned long addr); int fsl_is_pci_agent(struct pci_controller *hose); @@ -149,7 +177,10 @@ typedef struct ccsr_pci { u32 perr_cap3; /* 0xe34 - PCIE Error Capture Register 3 */ char res23[200]; u32 pdb_stat; /* 0xf00 - PCIE Debug Status */ - char res24[252]; + char res24[16]; + u32 pex_csr0; /* 0xf14 - PEX Control/Status register 0*/ + u32 pex_csr1; /* 0xf18 - PEX Control/Status register 1*/ + char res25[228]; } ccsr_fsl_pci_t; #define PCIE_CONFIG_PC 0x00020000 #define PCIE_CONFIG_OB_CK 0x00002000 diff --git a/arch/powerpc/include/asm/fsl_serdes.h b/arch/powerpc/include/asm/fsl_serdes.h index 59189ad..1106d28 100644 --- a/arch/powerpc/include/asm/fsl_serdes.h +++ b/arch/powerpc/include/asm/fsl_serdes.h @@ -90,6 +90,7 @@ void fsl_serdes_init(void); #ifdef CONFIG_FSL_CORENET #ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 int serdes_get_first_lane(u32 sd, enum srds_prtcl device); +enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane); #else int serdes_get_first_lane(enum srds_prtcl device); #endif diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index 81b3322..3a10d77 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -1544,6 +1544,18 @@ struct rio_pw { }; #endif +#ifdef CONFIG_SYS_FSL_SRIO_LIODN +struct rio_liodn { + u32 plbr; + u8 res0[28]; + u32 plaor; + u8 res1[12]; + u32 pludr; + u32 plldr; + u8 res2[456]; +}; +#endif + /* RapidIO Registers */ struct ccsr_rio { struct rio_arch arch; @@ -1566,6 +1578,10 @@ struct ccsr_rio { u8 res7[100]; struct rio_pw pw; #endif +#ifdef CONFIG_SYS_FSL_SRIO_LIODN + u8 res5[8192]; + struct rio_liodn liodn[CONFIG_SYS_FSL_SRIO_MAX_PORTS]; +#endif }; #endif @@ -2131,6 +2147,11 @@ typedef struct ccsr_gur { #ifdef CONFIG_MPC8536 #define MPC85xx_PORPLLSR_DDR_RATIO 0x3e000000 #define MPC85xx_PORPLLSR_DDR_RATIO_SHIFT 25 +#elif defined(CONFIG_PPC_C29X) +#define MPC85xx_PORPLLSR_DDR_RATIO 0x00003f00 +#define MPC85xx_PORPLLSR_DDR_RATIO_SHIFT (9 - ((gur->pordevsr2 \ + & MPC85xx_PORDEVSR2_DDR_SPD_0) \ + >> MPC85xx_PORDEVSR2_DDR_SPD_0_SHIFT)) #else #if defined(CONFIG_BSC9131) || defined(CONFIG_BSC9132) #define MPC85xx_PORPLLSR_DDR_RATIO 0x00003f00 @@ -2178,6 +2199,9 @@ typedef struct ccsr_gur { #elif defined(CONFIG_BSC9132) #define MPC85xx_PORDEVSR_IO_SEL 0x00FE0000 #define MPC85xx_PORDEVSR_IO_SEL_SHIFT 17 +#elif defined(CONFIG_PPC_C29X) +#define MPC85xx_PORDEVSR_IO_SEL 0x00e00000 +#define MPC85xx_PORDEVSR_IO_SEL_SHIFT 21 #else #define MPC85xx_PORDEVSR_IO_SEL 0x00780000 #define MPC85xx_PORDEVSR_IO_SEL_SHIFT 19 @@ -2193,6 +2217,10 @@ typedef struct ccsr_gur { #define MPC85xx_PORDEVSR_RIO_DEV_ID 0x00000007 u32 pordbgmsr; /* POR debug mode status */ u32 pordevsr2; /* POR I/O device status 2 */ +#if defined(CONFIG_PPC_C29X) +#define MPC85xx_PORDEVSR2_DDR_SPD_0 0x00000008 +#define MPC85xx_PORDEVSR2_DDR_SPD_0_SHIFT 3 +#endif /* The 8544 RM says this is bit 26, but it's really bit 24 */ #define MPC85xx_PORDEVSR2_SEC_CFG 0x00000080 u8 res1[8]; @@ -2339,6 +2367,11 @@ typedef struct ccsr_gur { #define MPC85xx_PMUXCR0_SIM_SEL_MASK 0x0003b000 #define MPC85xx_PMUXCR0_SIM_SEL 0x00014000 #endif +#if defined(CONFIG_PPC_C29X) +#define MPC85xx_PMUXCR_SPI_MASK 0x00000300 +#define MPC85xx_PMUXCR_SPI 0x00000000 +#define MPC85xx_PMUXCR_SPI_GPIO 0x00000100 +#endif u32 pmuxcr2; /* Alt. function signal multiplex control 2 */ #if defined(CONFIG_P1010) || defined(CONFIG_P1014) #define MPC85xx_PMUXCR2_UART_GPIO 0x40000000 @@ -2526,7 +2559,9 @@ typedef struct serdes_corenet { #define SRDS_RSTCTL_RSTDONE 0x40000000 #define SRDS_RSTCTL_RSTERR 0x20000000 #define SRDS_RSTCTL_SWRST 0x10000000 -#define SRDS_RSTCTL_SDPD 0x00000020 +#define SRDS_RSTCTL_SDEN 0x00000020 +#define SRDS_RSTCTL_SDRST_B 0x00000040 +#define SRDS_RSTCTL_PLLRST_B 0x00000080 u32 pllcr0; /* PLL Control Register 0 */ #define SRDS_PLLCR0_POFF 0x80000000 #define SRDS_PLLCR0_RFCK_SEL_MASK 0x70000000 @@ -2811,54 +2846,6 @@ typedef struct ccsr_pme { u8 res4[0x400]; } ccsr_pme_t; -#ifdef CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE -struct ccsr_usb_port_ctrl { - u32 ctrl; - u32 drvvbuscfg; - u32 pwrfltcfg; - u32 sts; - u8 res_14[0xc]; - u32 bistcfg; - u32 biststs; - u32 abistcfg; - u32 abiststs; - u8 res_30[0x10]; - u32 xcvrprg; - u32 anaprg; - u32 anadrv; - u32 anasts; -}; - -typedef struct ccsr_usb_phy { - u32 id; - struct ccsr_usb_port_ctrl port1; - u8 res_50[0xc]; - u32 tvr; - u32 pllprg[4]; - u8 res_70[0x4]; - u32 anaccfg; - u32 dbg; - u8 res_7c[0x4]; - struct ccsr_usb_port_ctrl port2; - u8 res_dc[0x334]; -} ccsr_usb_phy_t; - -#define CONFIG_SYS_FSL_USB_CTRL_PHY_EN (1 << 0) -#define CONFIG_SYS_FSL_USB_DRVVBUS_CR_EN (1 << 1) -#define CONFIG_SYS_FSL_USB_PWRFLT_CR_EN (1 << 1) -#define CONFIG_SYS_FSL_USB_PLLPRG2_PHY2_CLK_EN (1 << 0) -#define CONFIG_SYS_FSL_USB_PLLPRG2_PHY1_CLK_EN (1 << 1) -#define CONFIG_SYS_FSL_USB_PLLPRG2_MFI (5 << 16) -#define CONFIG_SYS_FSL_USB_PLLPRG2_PLL_EN (1 << 21) -#else -typedef struct ccsr_usb_phy { - u8 res0[0x18]; - u32 usb_enable_override; - u8 res[0xe4]; -} ccsr_usb_phy_t; -#define CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE 1 -#endif - #ifdef CONFIG_SYS_FSL_RAID_ENGINE struct ccsr_raide { u8 res0[0x543]; @@ -3008,12 +2995,18 @@ struct ccsr_pman { #define CONFIG_SYS_MPC85xx_USB2_OFFSET 0x23000 #ifdef CONFIG_TSECV2 #define CONFIG_SYS_TSEC1_OFFSET 0xB0000 +#elif defined(CONFIG_TSECV2_1) +#define CONFIG_SYS_TSEC1_OFFSET 0x10000 #else #define CONFIG_SYS_TSEC1_OFFSET 0x24000 #endif #define CONFIG_SYS_MDIO1_OFFSET 0x24000 #define CONFIG_SYS_MPC85xx_ESDHC_OFFSET 0x2e000 +#if defined(CONFIG_PPC_C29X) +#define CONFIG_SYS_FSL_SEC_OFFSET 0x80000 +#else #define CONFIG_SYS_FSL_SEC_OFFSET 0x30000 +#endif #define CONFIG_SYS_MPC85xx_SERDES2_OFFSET 0xE3100 #define CONFIG_SYS_MPC85xx_SERDES1_OFFSET 0xE3000 #define CONFIG_SYS_SNVS_OFFSET 0xE6000 @@ -3031,6 +3024,12 @@ struct ccsr_pman { #define CONFIG_SYS_MPC85xx_GUTS_OFFSET 0xE0000 #define CONFIG_SYS_FSL_SRIO_OFFSET 0xC0000 +#if defined(CONFIG_BSC9132) +#define CONFIG_SYS_FSL_DSP_CCSR_DDR_OFFSET 0x10000 +#define CONFIG_SYS_FSL_DSP_CCSR_DDR_ADDR \ + (CONFIG_SYS_FSL_DSP_CCSRBAR + CONFIG_SYS_FSL_DSP_CCSR_DDR_OFFSET) +#endif + #define CONFIG_SYS_FSL_CPC_ADDR \ (CONFIG_SYS_CCSRBAR + CONFIG_SYS_FSL_CPC_OFFSET) #define CONFIG_SYS_FSL_QMAN_ADDR \ diff --git a/arch/powerpc/include/asm/ppc405.h b/arch/powerpc/include/asm/ppc405.h index 892848a..8bb342b 100644 --- a/arch/powerpc/include/asm/ppc405.h +++ b/arch/powerpc/include/asm/ppc405.h @@ -1,25 +1,6 @@ -/*----------------------------------------------------------------------------+ -| This source code is dual-licensed. You may use it under the terms of the -| GNU General Public License version 2, or under the license below. -| -| This source code has been made available to you by IBM on an AS-IS -| basis. Anyone receiving this source is licensed under IBM -| copyrights to use it in any way he or she deems fit, including -| copying it, modifying it, compiling it, and redistributing it either -| with or without modifications. No license under IBM patents or -| patent applications is to be implied by the copyright license. -| -| Any user of this software should understand that IBM cannot provide -| technical support for this software and will not be responsible for -| any consequences resulting from the use of this software. -| -| Any person who transfers this source code or any derivative work -| must include the IBM copyright notice, this paragraph, and the -| preceding two paragraphs in the transferred software. -| -| COPYRIGHT I B M CORPORATION 1999 -| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M -+----------------------------------------------------------------------------*/ +/* + * SPDX-License-Identifier: GPL-2.0 ibm-pibs + */ #ifndef __PPC405_H__ #define __PPC405_H__ diff --git a/arch/powerpc/include/asm/ppc405cr.h b/arch/powerpc/include/asm/ppc405cr.h deleted file mode 100644 index 0ea69bd..0000000 --- a/arch/powerpc/include/asm/ppc405cr.h +++ /dev/null @@ -1,92 +0,0 @@ -/* - * (C) Copyright 2010 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _PPC405CR_H_ -#define _PPC405CR_H_ - -#define CONFIG_SDRAM_PPC4xx_IBM_SDRAM /* IBM SDRAM controller */ - -/* Memory mapped register */ -#define CONFIG_SYS_PERIPHERAL_BASE 0xef600000 /* Internal Peripherals */ - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_PERIPHERAL_BASE + 0x0300) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_PERIPHERAL_BASE + 0x0400) - -#define GPIO0_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x0700) - -/* DCR's */ -#define DCP0_CFGADDR 0x0014 /* Decompression controller addr reg */ -#define DCP0_CFGDATA 0x0015 /* Decompression controller data reg */ -#define OCM0_ISCNTL 0x0019 /* OCM I-side control reg */ -#define OCM0_DSARC 0x001a /* OCM D-side address compare */ -#define OCM0_DSCNTL 0x001b /* OCM D-side control */ -#define CPC0_PLLMR 0x00b0 /* PLL mode register */ -#define CPC0_CR0 0x00b1 /* chip control register 0 */ -#define CPC0_CR1 0x00b2 /* chip control register 1 */ -#define CPC0_PSR 0x00b4 /* chip pin strapping reg */ -#define CPC0_EIRR 0x00b6 /* ext interrupt routing reg */ -#define CPC0_SR 0x00b8 /* Power management status */ -#define CPC0_ER 0x00b9 /* Power management enable */ -#define CPC0_FR 0x00ba /* Power management force */ -#define CPC0_ECR 0x00aa /* edge conditioner register */ - -#define PLLMR_FWD_DIV_MASK 0xE0000000 /* Forward Divisor */ -#define PLLMR_FWD_DIV_BYPASS 0xE0000000 -#define PLLMR_FWD_DIV_3 0xA0000000 -#define PLLMR_FWD_DIV_4 0x80000000 -#define PLLMR_FWD_DIV_6 0x40000000 - -#define PLLMR_FB_DIV_MASK 0x1E000000 /* Feedback Divisor */ -#define PLLMR_FB_DIV_1 0x02000000 -#define PLLMR_FB_DIV_2 0x04000000 -#define PLLMR_FB_DIV_3 0x06000000 -#define PLLMR_FB_DIV_4 0x08000000 - -#define PLLMR_TUNING_MASK 0x01F80000 - -#define PLLMR_CPU_TO_PLB_MASK 0x00060000 /* CPU:PLB Frequency Divisor */ -#define PLLMR_CPU_PLB_DIV_1 0x00000000 -#define PLLMR_CPU_PLB_DIV_2 0x00020000 -#define PLLMR_CPU_PLB_DIV_3 0x00040000 -#define PLLMR_CPU_PLB_DIV_4 0x00060000 - -#define PLLMR_OPB_TO_PLB_MASK 0x00018000 /* OPB:PLB Frequency Divisor */ -#define PLLMR_OPB_PLB_DIV_1 0x00000000 -#define PLLMR_OPB_PLB_DIV_2 0x00008000 -#define PLLMR_OPB_PLB_DIV_3 0x00010000 -#define PLLMR_OPB_PLB_DIV_4 0x00018000 - -#define PLLMR_PCI_TO_PLB_MASK 0x00006000 /* PCI:PLB Frequency Divisor */ -#define PLLMR_PCI_PLB_DIV_1 0x00000000 -#define PLLMR_PCI_PLB_DIV_2 0x00002000 -#define PLLMR_PCI_PLB_DIV_3 0x00004000 -#define PLLMR_PCI_PLB_DIV_4 0x00006000 - -#define PLLMR_EXB_TO_PLB_MASK 0x00001800 /* External Bus:PLB Divisor */ -#define PLLMR_EXB_PLB_DIV_2 0x00000000 -#define PLLMR_EXB_PLB_DIV_3 0x00000800 -#define PLLMR_EXB_PLB_DIV_4 0x00001000 -#define PLLMR_EXB_PLB_DIV_5 0x00001800 - -/* definitions for PPC405GPr (new mode strapping) */ -#define PLLMR_FWDB_DIV_MASK 0x00000007 /* Forward Divisor B */ - -#define PSR_PLL_FWD_MASK 0xC0000000 -#define PSR_PLL_FDBACK_MASK 0x30000000 -#define PSR_PLL_TUNING_MASK 0x0E000000 -#define PSR_PLB_CPU_MASK 0x01800000 -#define PSR_OPB_PLB_MASK 0x00600000 -#define PSR_PCI_PLB_MASK 0x00180000 -#define PSR_EB_PLB_MASK 0x00060000 -#define PSR_ROM_WIDTH_MASK 0x00018000 -#define PSR_ROM_LOC 0x00004000 -#define PSR_PCI_ASYNC_EN 0x00001000 -#define PSR_PERCLK_SYNC_MODE_EN 0x00000800 /* PPC405GPr only */ -#define PSR_PCI_ARBIT_EN 0x00000400 -#define PSR_NEW_MODE_EN 0x00000020 /* PPC405GPr only */ - -#endif /* _PPC405CR_H_ */ diff --git a/arch/powerpc/include/asm/ppc440.h b/arch/powerpc/include/asm/ppc440.h index 411d441..0f5bc8d 100644 --- a/arch/powerpc/include/asm/ppc440.h +++ b/arch/powerpc/include/asm/ppc440.h @@ -1,26 +1,3 @@ -/*----------------------------------------------------------------------------+ -| This source code is dual-licensed. You may use it under the terms of the -| GNU General Public License version 2, or under the license below. -| -| This source code has been made available to you by IBM on an AS-IS -| basis. Anyone receiving this source is licensed under IBM -| copyrights to use it in any way he or she deems fit, including -| copying it, modifying it, compiling it, and redistributing it either -| with or without modifications. No license under IBM patents or -| patent applications is to be implied by the copyright license. -| -| Any user of this software should understand that IBM cannot provide -| technical support for this software and will not be responsible for -| any consequences resulting from the use of this software. -| -| Any person who transfers this source code or any derivative work -| must include the IBM copyright notice, this paragraph, and the -| preceding two paragraphs in the transferred software. -| -| COPYRIGHT I B M CORPORATION 1999 -| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M -+----------------------------------------------------------------------------*/ - /* * (C) Copyright 2006 * Sylvie Gohl, AMCC/IBM, gohl.sylvie@fr.ibm.com @@ -32,7 +9,7 @@ * (C) Copyright 2010 * Stefan Roese, DENX Software Engineering, sr@denx.de. * - * SPDX-License-Identifier: GPL-2.0+ + * SPDX-License-Identifier: GPL-2.0 ibm-pibs */ #ifndef __PPC440_H__ diff --git a/arch/powerpc/include/asm/ppc4xx-ebc.h b/arch/powerpc/include/asm/ppc4xx-ebc.h index 9eb50ee..32062fd 100644 --- a/arch/powerpc/include/asm/ppc4xx-ebc.h +++ b/arch/powerpc/include/asm/ppc4xx-ebc.h @@ -14,12 +14,12 @@ * Within this group there is a slight variation concerning the bit field * position of the EMPL and EMPH fields: */ -#if defined(CONFIG_405CR) || defined(CONFIG_405GP) || \ +#if defined(CONFIG_405GP) || \ defined(CONFIG_405EP) || \ defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) #define CONFIG_EBC_PPC4xx_IBM_VER1 -#if defined(CONFIG_405CR) || defined(CONFIG_405GP) || \ +#if defined(CONFIG_405GP) || \ defined(CONFIG_405EP) #define EBC_CFG_EMPH_POS 8 #define EBC_CFG_EMPL_POS 6 @@ -32,7 +32,7 @@ /* * Define the max number of EBC banks (chip selects) */ -#if defined(CONFIG_405CR) || defined(CONFIG_405GP) || \ +#if defined(CONFIG_405GP) || \ defined(CONFIG_405EZ) || \ defined(CONFIG_440GP) || defined(CONFIG_440GX) #define EBC_NUM_BANKS 8 diff --git a/arch/powerpc/include/asm/ppc4xx-emac.h b/arch/powerpc/include/asm/ppc4xx-emac.h index a219fa9..e6eb332 100644 --- a/arch/powerpc/include/asm/ppc4xx-emac.h +++ b/arch/powerpc/include/asm/ppc4xx-emac.h @@ -1,25 +1,6 @@ -/*----------------------------------------------------------------------------+ -| This source code is dual-licensed. You may use it under the terms of the -| GNU General Public License version 2, or under the license below. -| -| This source code has been made available to you by IBM on an AS-IS -| basis. Anyone receiving this source is licensed under IBM -| copyrights to use it in any way he or she deems fit, including -| copying it, modifying it, compiling it, and redistributing it either -| with or without modifications. No license under IBM patents or -| patent applications is to be implied by the copyright license. -| -| Any user of this software should understand that IBM cannot provide -| technical support for this software and will not be responsible for -| any consequences resulting from the use of this software. -| -| Any person who transfers this source code or any derivative work -| must include the IBM copyright notice, this paragraph, and the -| preceding two paragraphs in the transferred software. -| -| COPYRIGHT I B M CORPORATION 1999 -| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M -+----------------------------------------------------------------------------*/ +/* + * SPDX-License-Identifier: GPL-2.0 ibm-pibs + */ /*----------------------------------------------------------------------------+ | | File Name: enetemac.h diff --git a/arch/powerpc/include/asm/ppc4xx-mal.h b/arch/powerpc/include/asm/ppc4xx-mal.h index 7198685..d15290d 100644 --- a/arch/powerpc/include/asm/ppc4xx-mal.h +++ b/arch/powerpc/include/asm/ppc4xx-mal.h @@ -1,26 +1,7 @@ /* include/mal.h, openbios_walnut, walnut_bios 8/6/99 08:48:40 */ -/*----------------------------------------------------------------------------+ -| This source code is dual-licensed. You may use it under the terms of the -| GNU General Public License version 2, or under the license below. -| -| This source code has been made available to you by IBM on an AS-IS -| basis. Anyone receiving this source is licensed under IBM -| copyrights to use it in any way he or she deems fit, including -| copying it, modifying it, compiling it, and redistributing it either -| with or without modifications. No license under IBM patents or -| patent applications is to be implied by the copyright license. -| -| Any user of this software should understand that IBM cannot provide -| technical support for this software and will not be responsible for -| any consequences resulting from the use of this software. -| -| Any person who transfers this source code or any derivative work -| must include the IBM copyright notice, this paragraph, and the -| preceding two paragraphs in the transferred software. -| -| COPYRIGHT I B M CORPORATION 1999 -| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M -+----------------------------------------------------------------------------*/ +/* + * SPDX-License-Identifier: GPL-2.0 ibm-pibs + */ /*----------------------------------------------------------------------------+ | | File Name: mal.h diff --git a/arch/powerpc/include/asm/ppc4xx.h b/arch/powerpc/include/asm/ppc4xx.h index 9f2a08b..8d703c6 100644 --- a/arch/powerpc/include/asm/ppc4xx.h +++ b/arch/powerpc/include/asm/ppc4xx.h @@ -1,25 +1,6 @@ -/*----------------------------------------------------------------------------+ -| This source code is dual-licensed. You may use it under the terms of -| the GNU General Public License version 2, or under the license below. -| -| This source code has been made available to you by IBM on an AS-IS -| basis. Anyone receiving this source is licensed under IBM -| copyrights to use it in any way he or she deems fit, including -| copying it, modifying it, compiling it, and redistributing it either -| with or without modifications. No license under IBM patents or -| patent applications is to be implied by the copyright license. -| -| Any user of this software should understand that IBM cannot provide -| technical support for this software and will not be responsible for -| any consequences resulting from the use of this software. -| -| Any person who transfers this source code or any derivative work -| must include the IBM copyright notice, this paragraph, and the -| preceding two paragraphs in the transferred software. -| -| COPYRIGHT I B M CORPORATION 1999 -| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M -+----------------------------------------------------------------------------*/ +/* + * SPDX-License-Identifier: GPL-2.0 ibm-pibs + */ #ifndef __PPC4XX_H__ #define __PPC4XX_H__ @@ -27,10 +8,6 @@ /* * Include SoC specific headers */ -#if defined(CONFIG_405CR) -#include <asm/ppc405cr.h> -#endif - #if defined(CONFIG_405EP) #include <asm/ppc405ep.h> #endif diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 56b22d8..c0fb519 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -847,7 +847,7 @@ /* System-On-Chip Version Register (SVR) field extraction */ #define SVR_VER(svr) (((svr) >> 16) & 0xFFFF) /* Version field */ -#define SVR_REV(svr) (((svr) >> 0) & 0xFFFF) /* Revision field */ +#define SVR_REV(svr) (((svr) >> 0) & 0xFF) /* Revision field */ #define SVR_CID(svr) (((svr) >> 28) & 0x0F) /* Company or manufacturer ID */ #define SVR_SOCOP(svr) (((svr) >> 22) & 0x3F) /* SOC integration options */ @@ -894,9 +894,6 @@ #define PVR_405GP_RC 0x40110082 #define PVR_405GP_RD 0x401100C4 #define PVR_405GP_RE 0x40110145 /* same as pc405cr rev c */ -#define PVR_405CR_RA 0x40110041 -#define PVR_405CR_RB 0x401100C5 -#define PVR_405CR_RC 0x40110145 /* same as pc405gp rev e */ #define PVR_405EP_RA 0x51210950 #define PVR_405GPR_RB 0x50910951 #define PVR_405EZ_RA 0x41511460 @@ -1043,9 +1040,6 @@ /* System Version Register (SVR) field extraction */ -#define SVR_VER(svr) (((svr) >> 16) & 0xFFFF) /* Version field */ -#define SVR_REV(svr) (((svr) >> 0) & 0xFFFF) /* Revison field */ - #define SVR_SUBVER(svr) (((svr) >> 8) & 0xFF) /* Process/MFG sub-version */ #define SVR_FAM(svr) (((svr) >> 20) & 0xFFF) /* Family field */ @@ -1119,6 +1113,9 @@ #define SVR_T4240 0x824000 #define SVR_T4120 0x824001 #define SVR_T4160 0x824100 +#define SVR_C291 0x850000 +#define SVR_C292 0x850020 +#define SVR_C293 0x850030 #define SVR_B4860 0X868000 #define SVR_G4860 0x868001 #define SVR_G4060 0x868003 diff --git a/arch/powerpc/include/asm/u-boot.h b/arch/powerpc/include/asm/u-boot.h index f17b146..5916f7c 100644 --- a/arch/powerpc/include/asm/u-boot.h +++ b/arch/powerpc/include/asm/u-boot.h @@ -67,7 +67,6 @@ typedef struct bd_info { unsigned int bi_baudrate; /* Console Baudrate */ #if defined(CONFIG_405) || \ defined(CONFIG_405GP) || \ - defined(CONFIG_405CR) || \ defined(CONFIG_405EP) || \ defined(CONFIG_405EZ) || \ defined(CONFIG_405EX) || \ diff --git a/arch/x86/cpu/coreboot/config.mk b/arch/x86/cpu/coreboot/config.mk deleted file mode 100644 index 0bbd2ff..0000000 --- a/arch/x86/cpu/coreboot/config.mk +++ /dev/null @@ -1,7 +0,0 @@ -# -# Copyright (c) 2012 The Chromium OS Authors. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -CONFIG_ARCH_DEVICE_TREE := coreboot diff --git a/arch/x86/cpu/coreboot/tables.c b/arch/x86/cpu/coreboot/tables.c index b116d59..0d91adc 100644 --- a/arch/x86/cpu/coreboot/tables.c +++ b/arch/x86/cpu/coreboot/tables.c @@ -4,28 +4,7 @@ * Copyright (C) 2008 Advanced Micro Devices, Inc. * Copyright (C) 2009 coresystems GmbH * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. + * SPDX-License-Identifier: BSD-3-Clause */ #include <common.h> diff --git a/arch/x86/include/asm/arch-coreboot/sysinfo.h b/arch/x86/include/asm/arch-coreboot/sysinfo.h index 78d3a9d..8e4a61d 100644 --- a/arch/x86/include/asm/arch-coreboot/sysinfo.h +++ b/arch/x86/include/asm/arch-coreboot/sysinfo.h @@ -3,28 +3,7 @@ * * Copyright (C) 2008 Advanced Micro Devices, Inc. * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. + * SPDX-License-Identifier: BSD-3-Clause */ #ifndef _COREBOOT_SYSINFO_H diff --git a/arch/x86/include/asm/arch-coreboot/tables.h b/arch/x86/include/asm/arch-coreboot/tables.h index ad34a8b..0d02fe0 100644 --- a/arch/x86/include/asm/arch-coreboot/tables.h +++ b/arch/x86/include/asm/arch-coreboot/tables.h @@ -3,28 +3,7 @@ * * Copyright (C) 2008 Advanced Micro Devices, Inc. * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. + * SPDX-License-Identifier: BSD-3-Clause */ #ifndef _COREBOOT_TABLES_H diff --git a/board/AndesTech/adp-ag102/Makefile b/board/AndesTech/adp-ag102/Makefile index ec67dd0..6c18719 100644 --- a/board/AndesTech/adp-ag102/Makefile +++ b/board/AndesTech/adp-ag102/Makefile @@ -9,7 +9,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o -COBJS := adp-ag102.o +COBJS-y := adp-ag102.o SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y) $(SOBJS-y)) diff --git a/board/esd/canbt/Makefile b/board/Barix/ipam390/Makefile index e5caf23..c84ee05 100644 --- a/board/esd/canbt/Makefile +++ b/board/Barix/ipam390/Makefile @@ -1,29 +1,27 @@ # -# (C) Copyright 2000-2006 +# (C) Copyright 2000, 2001, 2002 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # +# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> +# # SPDX-License-Identifier: GPL-2.0+ # include $(TOPDIR)/config.mk -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif LIB = $(obj)lib$(BOARD).o -COBJS = $(BOARD).o flash.o ../common/misc.o +COBJS += ipam390.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $(OBJS)) +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS) $(SOBJS)) ######################################################################### - -# defines $(obj).depend target +# This is for $(obj).depend target include $(SRCTREE)/rules.mk sinclude $(obj).depend diff --git a/board/Barix/ipam390/README.ipam390 b/board/Barix/ipam390/README.ipam390 new file mode 100644 index 0000000..2d155a3 --- /dev/null +++ b/board/Barix/ipam390/README.ipam390 @@ -0,0 +1,229 @@ +Summary +======= +The README is for the boot procedure on the ipam390 board + +In the context of U-Boot, the board is booted in three stages. The initial +bootloader which executes upon reset is the ROM Boot Loader (RBL) and sits +in the internal ROM. The RBL initializes the internal memory and then +depending on the exact board and pin configurations will initialize another +controller (such as NAND) to continue the boot process by loading +the secondary program loader (SPL). The SPL will initialize the system +further (some clocks, SDRAM). As on this board is used the falcon boot +mode, now 2 ways are possible depending on the GPIO 7_14 input pin, +connected with the "soft reset switch" + +If this pin is logical 1 (high level): +spl code starts the kernel image without delay + +If this pin is logical 0 (low level): +spl code starts the u-boot image + +AIS is an image format defined by TI for the images that are to be loaded +to memory by the RBL. The image is divided into a series of sections and +the image's entry point is specified. Each section comes with meta data +like the target address the section is to be copied to and the size of the +section, which is used by the RBL to load the image. At the end of the +image the RBL jumps to the image entry point. The AIS format allows for +other things such as programming the clocks and SDRAM if the header is +programmed for it. We do not take advantage of this and instead use SPL as +it allows for additional flexibility (run-time detect of board revision, +loading the next image from a different media, etc). + +Compilation +=========== +run "./MAKEALL ipam390" in the u-boot source tree. +Once this build completes you will have a u-boot.ais file that needs to +be written to the nand flash. + +Flashing the images to NAND +========================== +The AIS image can be written to NAND flash using the following commands. +Assuming that the network is configured and enabled and the u-boot.ais file +is tftp'able. + +U-Boot > print upd_uboot +upd_uboot=tftp c0000000 ${u-boot};nand erase.part u-boot;nand write c0000000 20000 ${filesize} +U-Boot > +U-Boot > run upd_uboot +Using DaVinci-EMAC device +TFTP from server 192.168.1.1; our IP address is 192.168.20.71 +Filename '/tftpboot/ipam390/u-boot.ais'. +Load address: 0xc0000000 +Loading: ################################## + 1.5 MiB/s +done +Bytes transferred = 493716 (78894 hex) + +NAND erase.part: device 0 offset 0x20000, size 0x160000 +Erasing at 0x160000 -- 100% complete. +OK + +NAND write: device 0 offset 0x20000, size 0x78894 + 493716 bytes written: OK +U-Boot > + +Recovery +======== + +In the case of a "bricked" board, you need to use the TI tools found +here[1] to create an uboot-uart-ais.bin file + +- cd to the u-boot source tree + +- compile the u-boot for the ipam390 board: +$ ./MAKEALL ipam390 + + -> Now we shall have u-boot.bin + +- Create u-boot-uart-ais.bin +$ mono HexAIS_OMAP-L138.exe -entrypoint 0xC1080000 -ini +ipam390-ais-uart.cfg -o ./uboot-uart-ais.bin ./u-boot.bin@0xC1080000; + +Note: The ipam390-ais-uart.cfg is found in the board directory +for the ipam390 board, u-boot:/board/Barix/ipam390/ipam390-ais-uart.cfg + +- We can now run bootloader on IPAM390 via UART using the command below: + +$ mono ./slh_OMAP-L138.exe -waitForDevice -v -p /dev/tty.UC-232AC uboot-uart-ais.bin +NOTE: Do not cancel the command execution! The command takes 20+ seconds +to upload u-boot over serial and run it! +Outcome: +Waiting for the OMAP-L138... +(AIS Parse): Read magic word 0x41504954. +(AIS Parse): Waiting for BOOTME... (power on or reset target now) +(AIS Parse): BOOTME received! +(AIS Parse): Performing Start-Word Sync... +(AIS Parse): Performing Ping Opcode Sync... +(AIS Parse): Processing command 0: 0x5853590D. +(AIS Parse): Performing Opcode Sync... +(AIS Parse): Executing function... +(AIS Parse): Processing command 1: 0x5853590D. +(AIS Parse): Performing Opcode Sync... +(AIS Parse): Executing function... +(AIS Parse): Processing command 2: 0x5853590D. +(AIS Parse): Performing Opcode Sync... +(AIS Parse): Executing function... +(AIS Parse): Processing command 3: 0x5853590D. +(AIS Parse): Performing Opcode Sync... +(AIS Parse): Executing function... +(AIS Parse): Processing command 4: 0x5853590D. +(AIS Parse): Performing Opcode Sync... +(AIS Parse): Executing function... +(AIS Parse): Processing command 5: 0x58535901. +(AIS Parse): Performing Opcode Sync... +(AIS Parse): Loading section... +(AIS Parse): Loaded 326516-Byte section to address 0xC1080000. +(AIS Parse): Processing command 6: 0x58535906. +(AIS Parse): Performing Opcode Sync... +(AIS Parse): Performing jump and close... +(AIS Parse): AIS complete. Jump to address 0xC1080000. +(AIS Parse): Waiting for DONE... +(AIS Parse): Boot completed successfully. + +Operation completed successfully. + +Falcon Bootmode (boot linux without booting U-Boot) +=================================================== + +The Falcon Mode extends this way allowing to start the Linux kernel directly +from SPL. A new command is added to U-Boot to prepare the parameters that SPL +must pass to the kernel, using ATAGS or Device Tree. + +In normal mode, these parameters are generated each time before +loading the kernel, passing to Linux the address in memory where +the parameters can be read. +With Falcon Mode, this snapshot can be saved into persistent storage and SPL is +informed to load it before running the kernel. + +To boot the kernel, these steps under a Falcon-aware U-Boot are required: + +1. Boot the board into U-Boot. +Use the "spl export" command to generate the kernel parameters area or the DT. +U-Boot runs as when it boots the kernel, but stops before passing the control +to the kernel. + +Here the command sequence for the ipam390 board: +- load the linux kernel image into ram: + +U-Boot > nand read c0100000 2 200000 400000 + +NAND read: device 0 offset 0x200000, size 0x400000 + 4194304 bytes read: OK + +- generate the bootparms image: + +U-Boot > spl export atags c0100000 +## Booting kernel from Legacy Image at c0100000 ... + Image Name: Linux-3.5.1 + Image Type: ARM Linux Kernel Image (uncompressed) + Data Size: 2504280 Bytes = 2.4 MiB + Load Address: c0008000 + Entry Point: c0008000 + Verifying Checksum ... OK + Loading Kernel Image ... OK +subcommand not supported +subcommand not supported +Argument image is now in RAM at: 0xc0000100 + +- copy the bootparms image into nand: + +U-Boot > mtdparts + +device nand0 <davinci_nand.0>, # parts = 6 + #: name size offset mask_flags + 0: u-boot-env 0x00020000 0x00000000 0 + 1: u-boot 0x00160000 0x00020000 0 + 2: bootparms 0x00020000 0x00180000 0 + 3: factory-info 0x00060000 0x001a0000 0 + 4: kernel 0x00400000 0x00200000 0 + 5: rootfs 0x07a00000 0x00600000 0 + +active partition: nand0,0 - (u-boot-env) 0x00020000 @ 0x00000000 + +defaults: +mtdids : nand0=davinci_nand.0 +mtdparts: mtdparts=davinci_nand.0:128k(u-boot-env),1408k(u-boot),128k(bootparms),384k(factory-info),4M(kernel),-(rootfs) +U-Boot > nand erase.part bootparms + +NAND erase.part: device 0 offset 0x180000, size 0x20000 +Erasing at 0x180000 -- 100% complete. +OK +U-Boot > nand write c0000100 180000 20000 + +NAND write: device 0 offset 0x180000, size 0x20000 + 131072 bytes written: OK +U-Boot > + +You can use also the predefined U-Boot Environment variable "setbootparms", +which will do all the above steps in one command: + +U-Boot > print setbootparms +setbootparms=nand read c0100000 200000 400000;spl export atags c0100000;nand erase.part bootparms;nand write c0000100 180000 20000 +U-Boot > run setbootparms + +NAND read: device 0 offset 0x200000, size 0x400000 + 4194304 bytes read: OK +## Booting kernel from Legacy Image at c0100000 ... + Image Name: Linux-3.5.1 + Image Type: ARM Linux Kernel Image (uncompressed) + Data Size: 2504280 Bytes = 2.4 MiB + Load Address: c0008000 + Entry Point: c0008000 + Verifying Checksum ... OK + Loading Kernel Image ... OK +subcommand not supported +subcommand not supported +Argument image is now in RAM at: 0xc0000100 + +NAND erase.part: device 0 offset 0x180000, size 0x20000 +Erasing at 0x180000 -- 100% complete. +OK + +NAND write: device 0 offset 0x180000, size 0x20000 + 131072 bytes written: OK +U-Boot > + +Links +===== +[1] + http://sourceforge.net/projects/dvflashutils/files/OMAP-L138/ diff --git a/board/Barix/ipam390/ipam390-ais-uart.cfg b/board/Barix/ipam390/ipam390-ais-uart.cfg new file mode 100644 index 0000000..e1a99f2 --- /dev/null +++ b/board/Barix/ipam390/ipam390-ais-uart.cfg @@ -0,0 +1,202 @@ +; General settings that can be overwritten in the host code +; that calls the AISGen library. +[General] + +; Can be 8 or 16 - used in emifa +busWidth=8 + +; SPIMASTER,I2CMASTER,EMIFA,NAND,EMAC,UART,PCI,HPI,USB,MMC_SD,VLYNQ,RAW +BootMode=UART + +; 8,16,24 - used for SPI,I2C +;AddrWidth=8 + +; NO_CRC,SECTION_CRC,SINGLE_CRC +crcCheckType=NO_CRC + +; This section allows setting the PLL0 system clock with a +; specified multiplier and divider as shown. The clock source +; can also be chosen for internal or external. +; |------24|------16|-------8|-------0| +; PLL0CFG0: | CLKMODE| PLLM | PREDIV | POSTDIV| +; PLL0CFG1: | RSVD | PLLDIV1| PLLDIV3| PLLDIV7| +;[PLL0CONFIG] +;PLL0CFG0 = 0x00180001 +;PLL0CFG1 = 0x00000205 + +[PLLANDCLOCKCONFIG] +PLL0CFG0 = 0x00180001 +PLL0CFG1 = 0x00000205 +PERIPHCLKCFG = 0x00000051 + +; This section allows setting up the PLL1. Usually this will +; take place as part of the EMIF3a DDR setup. The format of +; the input args is as follows: +; |------24|------16|-------8|-------0| +; PLL1CFG0: | PLLM| POSTDIV| PLLDIV1| PLLDIV2| +; PLL1CFG1: | RSVD | PLLDIV3| +[PLL1CONFIG] +PLL1CFG0 = 0x18010001 +PLL1CFG1 = 0x00000002 + +; This section lets us configure the peripheral interface +; of the current booting peripheral (I2C, SPI, or UART). +; Use with caution. The format of the PERIPHCLKCFG field +; is as follows: +; SPI: |------24|------16|-------8|-------0| +; | RSVD |PRESCALE| +; +; I2C: |------24|------16|-------8|-------0| +; | RSVD |PRESCALE| CLKL | CLKH | +; +; UART: |------24|------16|-------8|-------0| +; | RSVD | OSR | DLH | DLL | +[PERIPHCLKCFG] +PERIPHCLKCFG = 0x00000051 + +; This section can be used to configure the PLL1 and the EMIF3a registers +; for starting the DDR2 interface. +; See PLL1CONFIG section for the format of the PLL1CFG fields. +; |------24|------16|-------8|-------0| +; PLL1CFG0: | PLL1CFG | +; PLL1CFG1: | PLL1CFG | +; DDRPHYC1R: | DDRPHYC1R | +; SDCR: | SDCR | +; SDTIMR: | SDTIMR | +; SDTIMR2: | SDTIMR2 | +; SDRCR: | SDRCR | +; CLK2XSRC: | CLK2XSRC | +[EMIF3DDR] +PLL1CFG0 = 0x18010001 +PLL1CFG1 = 0x00000002 +DDRPHYC1R = 0x000000C2 +SDCR = 0x0017C432 +SDTIMR = 0x26922A09 +SDTIMR2 = 0x4414C722 +SDRCR = 0x00000498 +CLK2XSRC = 0x00000000 + +; This section can be used to configure the EMIFA to use +; CS0 as an SDRAM interface. The fields required to do this +; are given below. +; |------24|------16|-------8|-------0| +; SDBCR: | SDBCR | +; SDTIMR: | SDTIMR | +; SDRSRPDEXIT: | SDRSRPDEXIT | +; SDRCR: | SDRCR | +; DIV4p5_CLK_ENABLE: | DIV4p5_CLK_ENABLE | +;[EMIF25SDRAM] +;SDBCR = 0x00004421 +;SDTIMR = 0x42215810 +;SDRSRPDEXIT = 0x00000009 +;SDRCR = 0x00000410 +;DIV4p5_CLK_ENABLE = 0x00000001 + +; This section can be used to configure the async chip selects +; of the EMIFA (CS2-CS5). The fields required to do this +; are given below. +; |------24|------16|-------8|-------0| +; A1CR: | A1CR | +; A2CR: | A2CR | +; A3CR: | A3CR | +; A4CR: | A4CR | +; NANDFCR: | NANDFCR | +;[EMIF25ASYNC] +;A1CR = 0x00000000 +;A2CR = 0x00000000 +;A3CR = 0x00000000 +;A4CR = 0x00000000 +;NANDFCR = 0x00000000 +[EMIF25ASYNC] +A1CR = 0x00000000 +A2CR = 0x3FFFFFFE +A3CR = 0x00000000 +A4CR = 0x00000000 +NANDFCR = 0x00000012 + +; This section should be used in place of PLL0CONFIG when +; the I2C, SPI, or UART modes are being used. This ensures that +; the system PLL and the peripheral's clocks are changed together. +; See PLL0CONFIG section for the format of the PLL0CFG fields. +; See PERIPHCLKCFG section for the format of the CLKCFG field. +; |------24|------16|-------8|-------0| +; PLL0CFG0: | PLL0CFG | +; PLL0CFG1: | PLL0CFG | +; PERIPHCLKCFG: | CLKCFG | +;[PLLANDCLOCKCONFIG] +;PLL0CFG0 = 0x00180001 +;PLL0CFG1 = 0x00000205 +;PERIPHCLKCFG = 0x00010032 + +; This section should be used to setup the power state of modules +; of the two PSCs. This section can be included multiple times to +; allow the configuration of any or all of the device modules. +; |------24|------16|-------8|-------0| +; LPSCCFG: | PSCNUM | MODULE | PD | STATE | +;[PSCCONFIG] +;LPSCCFG= + +; This section allows setting of a single PINMUX register. +; This section can be included multiple times to allow setting +; as many PINMUX registers as needed. +; |------24|------16|-------8|-------0| +; REGNUM: | regNum | +; MASK: | mask | +; VALUE: | value | +;[PINMUX] +;REGNUM = 5 +;MASK = 0x00FF0000 +;VALUE = 0x00880000 + +; No Params required - simply include this section for the fast boot +; function to be called +;[FASTBOOT] + +; This section allows setting up the PLL1. Usually this will +; take place as part of the EMIF3a DDR setup. The format of +; the input args is as follows: +; |------24|------16|-------8|-------0| +; PLL1CFG0: | PLLM| POSTDIV| PLLDIV1| PLLDIV2| +; PLL1CFG1: | RSVD | PLLDIV3| +;[PLL1CONFIG] +;PLL1CFG0 = 0x15010001 +;PLL1CFG1 = 0x00000002 + +; This section can be used to configure the PLL1 and the EMIF3a registers +; for starting the DDR2 interface on ARM-boot D800K002 devices. +; |------24|------16|-------8|-------0| +; DDRPHYC1R: | DDRPHYC1R | +; SDCR: | SDCR | +; SDTIMR: | SDTIMR | +; SDTIMR2: | SDTIMR2 | +; SDRCR: | SDRCR | +; CLK2XSRC: | CLK2XSRC | +;[ARM_EMIF3DDR_PATCHFXN] +;DDRPHYC1R = 0x000000C2 +;SDCR = 0x0017C432 +;SDTIMR = 0x26922A09 +;SDTIMR2 = 0x4414C722 +;SDRCR = 0x00000498 +;CLK2XSRC = 0x00000000 + +; This section can be used to configure the PLL1 and the EMIF3a registers +; for starting the DDR2 interface on DSP-boot D800K002 devices. +; |------24|------16|-------8|-------0| +; DDRPHYC1R: | DDRPHYC1R | +; SDCR: | SDCR | +; SDTIMR: | SDTIMR | +; SDTIMR2: | SDTIMR2 | +; SDRCR: | SDRCR | +; CLK2XSRC: | CLK2XSRC | +;[DSP_EMIF3DDR_PATCHFXN] +;DDRPHYC1R = 0x000000C4 +;SDCR = 0x08134632 +;SDTIMR = 0x26922A09 +;SDTIMR2 = 0x0014C722 +;SDRCR = 0x00000492 +;CLK2XSRC = 0x00000000 + +;[INPUTFILE] +;FILENAME=u-boot.bin +;LOADADDRESS=0xC1080000 +;ENTRYPOINTADDRESS=0xC1080000 diff --git a/board/Barix/ipam390/ipam390.c b/board/Barix/ipam390/ipam390.c new file mode 100644 index 0000000..f3f276e --- /dev/null +++ b/board/Barix/ipam390/ipam390.c @@ -0,0 +1,348 @@ +/* + * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. + * Based on: + * U-Boot:board/davinci/da8xxevm/da850evm.c + * + * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ + * + * Based on da830evm.c. Original Copyrights follow: + * + * Copyright (C) 2009 Nick Thompson, GE Fanuc, Ltd. <nick.thompson@gefanuc.com> + * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <i2c.h> +#include <net.h> +#include <netdev.h> +#include <spi.h> +#include <spi_flash.h> +#include <asm/arch/hardware.h> +#include <asm/arch/emif_defs.h> +#include <asm/arch/emac_defs.h> +#include <asm/arch/pinmux_defs.h> +#include <asm/io.h> +#include <asm/arch/davinci_misc.h> +#include <asm/errno.h> +#include <asm/gpio.h> +#include <hwconfig.h> +#include <bootstage.h> + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_DRIVER_TI_EMAC +#ifdef CONFIG_DRIVER_TI_EMAC_USE_RMII +#define HAS_RMII 1 +#else +#define HAS_RMII 0 +#endif +#endif /* CONFIG_DRIVER_TI_EMAC */ + +void dsp_lpsc_on(unsigned domain, unsigned int id) +{ + dv_reg_p mdstat, mdctl, ptstat, ptcmd; + struct davinci_psc_regs *psc_regs; + + psc_regs = davinci_psc0_regs; + mdstat = &psc_regs->psc0.mdstat[id]; + mdctl = &psc_regs->psc0.mdctl[id]; + ptstat = &psc_regs->ptstat; + ptcmd = &psc_regs->ptcmd; + + while (*ptstat & (0x1 << domain)) + ; + + if ((*mdstat & 0x1f) == 0x03) + return; /* Already on and enabled */ + + *mdctl |= 0x03; + + *ptcmd = 0x1 << domain; + + while (*ptstat & (0x1 << domain)) + ; + while ((*mdstat & 0x1f) != 0x03) + ; /* Probably an overkill... */ +} + +static void dspwake(void) +{ + unsigned *resetvect = (unsigned *)DAVINCI_L3CBARAM_BASE; + u32 val; + + /* if the device is ARM only, return */ + if ((readl(CHIP_REV_ID_REG) & 0x3f) == 0x10) + return; + + if (hwconfig_subarg_cmp_f("dsp", "wake", "no", NULL)) + return; + + *resetvect++ = 0x1E000; /* DSP Idle */ + /* clear out the next 10 words as NOP */ + memset(resetvect, 0, sizeof(unsigned) * 10); + + /* setup the DSP reset vector */ + writel(DAVINCI_L3CBARAM_BASE, HOST1CFG); + + dsp_lpsc_on(1, DAVINCI_LPSC_GEM); + val = readl(PSC0_MDCTL + (15 * 4)); + val |= 0x100; + writel(val, (PSC0_MDCTL + (15 * 4))); +} + +int misc_init_r(void) +{ + dspwake(); + return 0; +} + +static const struct pinmux_config gpio_pins[] = { + /* GP7[14] selects bootmode*/ + { pinmux(16), 8, 3 }, /* GP7[14] */ +}; + +const struct pinmux_resource pinmuxes[] = { +#ifdef CONFIG_DRIVER_TI_EMAC + PINMUX_ITEM(emac_pins_mdio), +#ifdef CONFIG_DRIVER_TI_EMAC_USE_RMII + PINMUX_ITEM(emac_pins_rmii), +#else + PINMUX_ITEM(emac_pins_mii), +#endif +#endif + PINMUX_ITEM(uart2_pins_txrx), + PINMUX_ITEM(uart2_pins_rtscts), + PINMUX_ITEM(uart0_pins_txrx), + PINMUX_ITEM(uart0_pins_rtscts), +#ifdef CONFIG_NAND_DAVINCI + PINMUX_ITEM(emifa_pins_cs3), + PINMUX_ITEM(emifa_pins_nand), +#endif + PINMUX_ITEM(gpio_pins), +}; + +const int pinmuxes_size = ARRAY_SIZE(pinmuxes); + +const struct lpsc_resource lpsc[] = { + { DAVINCI_LPSC_AEMIF }, /* NAND, NOR */ + { DAVINCI_LPSC_EMAC }, /* image download */ + { DAVINCI_LPSC_UART2 }, /* console */ + { DAVINCI_LPSC_UART0 }, /* console */ + { DAVINCI_LPSC_GPIO }, +}; + +const int lpsc_size = ARRAY_SIZE(lpsc); + +#ifndef CONFIG_DA850_EVM_MAX_CPU_CLK +#define CONFIG_DA850_EVM_MAX_CPU_CLK 300000000 +#endif + +#define REV_AM18X_EVM 0x100 + +/* + * get_board_rev() - setup to pass kernel board revision information + * Returns: + * bit[0-3] Maximum cpu clock rate supported by onboard SoC + * 0000b - 300 MHz + * 0001b - 372 MHz + * 0010b - 408 MHz + * 0011b - 456 MHz + */ +u32 get_board_rev(void) +{ + char *s; + u32 maxcpuclk = CONFIG_DA850_EVM_MAX_CPU_CLK; + u32 rev = 0; + + s = getenv("maxcpuclk"); + if (s) + maxcpuclk = simple_strtoul(s, NULL, 10); + + if (maxcpuclk >= 456000000) + rev = 3; + else if (maxcpuclk >= 408000000) + rev = 2; + else if (maxcpuclk >= 372000000) + rev = 1; +#ifdef CONFIG_DA850_AM18X_EVM + rev |= REV_AM18X_EVM; +#endif + return rev; +} + +int board_early_init_f(void) +{ + /* + * Power on required peripherals + * ARM does not have access by default to PSC0 and PSC1 + * assuming here that the DSP bootloader has set the IOPU + * such that PSC access is available to ARM + */ + if (da8xx_configure_lpsc_items(lpsc, ARRAY_SIZE(lpsc))) + return 1; + + return 0; +} + +int board_init(void) +{ +#ifndef CONFIG_USE_IRQ + irq_init(); +#endif + + /* arch number of the board */ + gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DA850_EVM; + + /* address of boot parameters */ + gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; + + /* setup the SUSPSRC for ARM to control emulation suspend */ + writel(readl(&davinci_syscfg_regs->suspsrc) & + ~(DAVINCI_SYSCFG_SUSPSRC_EMAC | DAVINCI_SYSCFG_SUSPSRC_I2C | + DAVINCI_SYSCFG_SUSPSRC_SPI1 | DAVINCI_SYSCFG_SUSPSRC_TIMER0 | + DAVINCI_SYSCFG_SUSPSRC_UART0), + &davinci_syscfg_regs->suspsrc); + + /* configure pinmux settings */ + if (davinci_configure_pin_mux_items(pinmuxes, ARRAY_SIZE(pinmuxes))) + return 1; + +#ifdef CONFIG_DRIVER_TI_EMAC + davinci_emac_mii_mode_sel(HAS_RMII); +#endif /* CONFIG_DRIVER_TI_EMAC */ + + /* enable the console UART */ + writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST | + DAVINCI_UART_PWREMU_MGMT_UTRST), +#if (CONFIG_SYS_NS16550_COM1 == DAVINCI_UART0_BASE) + &davinci_uart0_ctrl_regs->pwremu_mgmt); +#else + &davinci_uart2_ctrl_regs->pwremu_mgmt); +#endif + return 0; +} + +#ifdef CONFIG_DRIVER_TI_EMAC +/* + * Initializes on-board ethernet controllers. + */ +int board_eth_init(bd_t *bis) +{ + if (!davinci_emac_initialize()) { + printf("Error: Ethernet init failed!\n"); + return -1; + } + + return 0; +} +#endif /* CONFIG_DRIVER_TI_EMAC */ + +static int init_led(int gpio, char *name, int val) +{ + int ret; + + ret = gpio_request(gpio, name); + if (ret) + return -1; + ret = gpio_direction_output(gpio, val); + if (ret) + return -1; + + return gpio; +} + +#define LED_ON 0 +#define LED_OFF 1 + +#if !defined(CONFIG_SPL_BUILD) +#ifdef CONFIG_SHOW_BOOT_PROGRESS +void show_boot_progress(int status) +{ + static int red; + static int green; + + if (red == 0) + red = init_led(CONFIG_IPAM390_GPIO_LED_RED, "red", LED_OFF); + if (red != CONFIG_IPAM390_GPIO_LED_RED) + return; + if (green == 0) + green = init_led(CONFIG_IPAM390_GPIO_LED_GREEN, "green", + LED_OFF); + if (green != CONFIG_IPAM390_GPIO_LED_GREEN) + return; + + switch (status) { + case BOOTSTAGE_ID_RUN_OS: + /* + * set normal state + * LED Red : off + * LED green: off + */ + gpio_set_value(red, LED_OFF); + gpio_set_value(green, LED_OFF); + break; + case BOOTSTAGE_ID_MAIN_LOOP: + /* + * U-Boot operation + * LED Red : on + * LED green: on + */ + gpio_set_value(red, LED_ON); + gpio_set_value(green, LED_ON); + break; + } +} +#endif +#endif + +#ifdef CONFIG_SPL_OS_BOOT +int spl_start_uboot(void) +{ + int ret; + int bootmode = 0; + + /* + * GP7[14] selects bootmode: + * 1: boot linux + * 0: boot u-boot + * if error accessing gpio boot U-Boot + * + * SPL bootmode + * 0: boot linux + * 1: boot u-boot + */ + ret = gpio_request(CONFIG_IPAM390_GPIO_BOOTMODE , "bootmode"); + if (ret) + bootmode = 1; + if (!bootmode) { + ret = gpio_direction_input(CONFIG_IPAM390_GPIO_BOOTMODE); + if (ret) + bootmode = 1; + } + if (!bootmode) + ret = gpio_get_value(CONFIG_IPAM390_GPIO_BOOTMODE); + if (!bootmode) + if (ret == 0) + bootmode = 1; + if (bootmode) { + /* + * Booting U-Boot + * LED Red : on + * LED green: off + */ + init_led(CONFIG_IPAM390_GPIO_LED_RED, "red", LED_ON); + init_led(CONFIG_IPAM390_GPIO_LED_GREEN, "green", LED_OFF); + } else { + /* + * Booting Linux + * LED Red : off + * LED green: off + */ + init_led(CONFIG_IPAM390_GPIO_LED_RED, "red", LED_OFF); + init_led(CONFIG_IPAM390_GPIO_LED_GREEN, "green", LED_OFF); + } + return bootmode; +} +#endif diff --git a/board/Barix/ipam390/u-boot-spl-ipam390.lds b/board/Barix/ipam390/u-boot-spl-ipam390.lds new file mode 100644 index 0000000..5480d1f --- /dev/null +++ b/board/Barix/ipam390/u-boot-spl-ipam390.lds @@ -0,0 +1,53 @@ +/* + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> + * + * (C) Copyright 2008 + * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +MEMORY { .sram : ORIGIN = CONFIG_SPL_TEXT_BASE,\ + LENGTH = CONFIG_SPL_MAX_FOOTPRINT } + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + __start = .; + arch/arm/cpu/arm926ejs/start.o (.text*) + *(.text*) + } >.sram + + . = ALIGN(4); + .rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.sram + + . = ALIGN(4); + .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram + + . = ALIGN(4); + .rel.dyn : { + __rel_dyn_start = .; + *(.rel*) + __rel_dyn_end = .; + } >.sram + + .bss : + { + . = ALIGN(4); + __bss_start = .; + *(.bss*) + . = ALIGN(4); + __bss_end = .; + } >.sram + + __image_copy_end = .; + _end = .; +} diff --git a/board/a3m071/README b/board/a3m071/README index a0fe832..112c47b 100644 --- a/board/a3m071/README +++ b/board/a3m071/README @@ -57,13 +57,13 @@ the following command: => fdt print 5. Save fdt to NOR flash: -=> erase fc060000 fc07ffff -=> cp.b 1800000 fc060000 10000 +=> erase fc180000 fc07ffff +=> cp.b 1800000 fc180000 10000 All this can be integrated into an environment command: -=> setenv upd_fdt 'tftp 1800000 a3m071/a3m071.dtb;run mtdargs addip2 addtty; \ - fdt addr 1800000;fdt boardsetup;fdt chosen;erase fc060000 fc07ffff; \ - cp.b 1800000 fc060000 10000' +=> setenv upd_fdt 'tftp 1800000 a3m071/a3m071.dtb;run mtdargs addip addtty; \ + fdt addr 1800000;fdt boardsetup;fdt chosen;erase fc180000 fc07ffff; \ + cp.b 1800000 fc180000 10000' => saveenv After this, only "run upd_fdt" needs to get called to load, patch diff --git a/board/atmel/at91sam9m10g45ek/config.mk b/board/atmel/at91sam9m10g45ek/config.mk deleted file mode 100644 index 9d3c5ae..0000000 --- a/board/atmel/at91sam9m10g45ek/config.mk +++ /dev/null @@ -1 +0,0 @@ -CONFIG_SYS_TEXT_BASE = 0x73f00000 diff --git a/board/atmel/at91sam9x5ek/config.mk b/board/atmel/at91sam9x5ek/config.mk deleted file mode 100644 index 6589a12..0000000 --- a/board/atmel/at91sam9x5ek/config.mk +++ /dev/null @@ -1 +0,0 @@ -CONFIG_SYS_TEXT_BASE = 0x26f00000 diff --git a/board/atmel/sama5d3xek/sama5d3xek.c b/board/atmel/sama5d3xek/sama5d3xek.c index 4a309ad..97caf64 100644 --- a/board/atmel/sama5d3xek/sama5d3xek.c +++ b/board/atmel/sama5d3xek/sama5d3xek.c @@ -17,6 +17,7 @@ #include <lcd.h> #include <atmel_lcdc.h> #include <atmel_mci.h> +#include <micrel.h> #include <net.h> #include <netdev.h> @@ -178,6 +179,8 @@ int board_init(void) #ifdef CONFIG_MACB if (has_emac()) at91_macb_hw_init(); + if (has_gmac()) + at91_gmac_hw_init(); #endif #ifdef CONFIG_LCD if (has_lcdc()) @@ -193,6 +196,21 @@ int dram_init(void) return 0; } +int board_phy_config(struct phy_device *phydev) +{ + /* rx data delay */ + ksz9021_phy_extended_write(phydev, + MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW, 0x2222); + /* tx data delay */ + ksz9021_phy_extended_write(phydev, + MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW, 0x2222); + /* rx/tx clock delay */ + ksz9021_phy_extended_write(phydev, + MII_KSZ9021_EXT_RGMII_CLOCK_SKEW, 0xf2f4); + + return 0; +} + int board_eth_init(bd_t *bis) { int rc = 0; @@ -200,6 +218,8 @@ int board_eth_init(bd_t *bis) #ifdef CONFIG_MACB if (has_emac()) rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC, 0x00); + if (has_gmac()) + rc = macb_eth_initialize(0, (void *)ATMEL_BASE_GMAC, 0x00); #endif return rc; diff --git a/board/chromebook-x86/coreboot/config.mk b/board/chromebook-x86/coreboot/config.mk index f720851..0c05dd0 100644 --- a/board/chromebook-x86/coreboot/config.mk +++ b/board/chromebook-x86/coreboot/config.mk @@ -1,37 +1,7 @@ # # Copyright (c) 2011 The Chromium OS Authors. All rights reserved. -# Use of this source code is governed by a BSD-style license that can be -# found in the LICENSE file. # -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions are -# met: -# -# * Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# * Redistributions in binary form must reproduce the above -# copyright notice, this list of conditions and the following disclaimer -# in the documentation and/or other materials provided with the -# distribution. -# * Neither the name of Google Inc. nor the names of its -# contributors may be used to endorse or promote products derived from -# this software without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR -# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT -# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT -# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -# -# Alternatively, this software may be distributed under the terms of the -# GNU General Public License ("GPL") version 2 as published by the Free -# Software Foundation. +# SPDX-License-Identifier: GPL-2.0 BSD-3-Clause # HOSTCFLAGS_autoconf.mk.dep = -Wno-variadic-macros diff --git a/board/chromebook-x86/dts/link.dts b/board/chromebook-x86/dts/link.dts index d0738cb..c95ee8a 100644 --- a/board/chromebook-x86/dts/link.dts +++ b/board/chromebook-x86/dts/link.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ ARCH_CPU_DTS +/include/ "coreboot.dtsi" / { #address-cells = <1>; diff --git a/board/cray/L1/init.S b/board/cray/L1/init.S index 1662141..82f21b0 100644 --- a/board/cray/L1/init.S +++ b/board/cray/L1/init.S @@ -1,27 +1,6 @@ -/*------------------------------------------------------------------------------+ */ -/* */ -/* This source code is dual-licensed. You may use it under the terms */ -/* of the GNU General Public License version 2, or under the license */ -/* below. */ -/* */ -/* This source code has been made available to you by IBM on an AS-IS */ -/* basis. Anyone receiving this source is licensed under IBM */ -/* copyrights to use it in any way he or she deems fit, including */ -/* copying it, modifying it, compiling it, and redistributing it either */ -/* with or without modifications. No license under IBM patents or */ -/* patent applications is to be implied by the copyright license. */ -/* */ -/* Any user of this software should understand that IBM cannot provide */ -/* technical support for this software and will not be responsible for */ -/* any consequences resulting from the use of this software. */ -/* */ -/* Any person who transfers this source code or any derivative work */ -/* must include the IBM copyright notice, this paragraph, and the */ -/* preceding two paragraphs in the transferred software. */ -/* */ -/* COPYRIGHT I B M CORPORATION 1995 */ -/* LICENSED MATERIAL - PROGRAM PROPERTY OF I B M */ -/*------------------------------------------------------------------------------- */ +/* + * SPDX-License-Identifier: GPL-2.0 ibm-pibs + */ /*----------------------------------------------------------------------------- */ /* Function: ext_bus_cntlr_init */ diff --git a/board/csb272/init.S b/board/csb272/init.S index 82c6fdb..b1283aa 100644 --- a/board/csb272/init.S +++ b/board/csb272/init.S @@ -1,26 +1,6 @@ -/****************************************************************************** - * This source code is dual-licensed. You may use it under the terms of the - * GNU General Public License version 2, or under the license below. - * - * This source code has been made available to you by IBM on an AS-IS - * basis. Anyone receiving this source is licensed under IBM - * copyrights to use it in any way he or she deems fit, including - * copying it, modifying it, compiling it, and redistributing it either - * with or without modifications. No license under IBM patents or - * patent applications is to be implied by the copyright license. - * - * Any user of this software should understand that IBM cannot provide - * technical support for this software and will not be responsible for - * any consequences resulting from the use of this software. - * - * Any person who transfers this source code or any derivative work - * must include the IBM copyright notice, this paragraph, and the - * preceding two paragraphs in the transferred software. - * - * COPYRIGHT I B M CORPORATION 1995 - * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M - * - *****************************************************************************/ +/* + * SPDX-License-Identifier: GPL-2.0 ibm-pibs + */ #include <config.h> #include <asm/ppc4xx.h> diff --git a/board/csb472/init.S b/board/csb472/init.S index e00b5f5..f5805b7 100644 --- a/board/csb472/init.S +++ b/board/csb472/init.S @@ -1,26 +1,6 @@ -/****************************************************************************** - * This source code is dual-licensed. You may use it under the terms of the - * GNU General Public License version 2, or under the license below. - * - * This source code has been made available to you by IBM on an AS-IS - * basis. Anyone receiving this source is licensed under IBM - * copyrights to use it in any way he or she deems fit, including - * copying it, modifying it, compiling it, and redistributing it either - * with or without modifications. No license under IBM patents or - * patent applications is to be implied by the copyright license. - * - * Any user of this software should understand that IBM cannot provide - * technical support for this software and will not be responsible for - * any consequences resulting from the use of this software. - * - * Any person who transfers this source code or any derivative work - * must include the IBM copyright notice, this paragraph, and the - * preceding two paragraphs in the transferred software. - * - * COPYRIGHT I B M CORPORATION 1995 - * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M - * - *****************************************************************************/ +/* + * SPDX-License-Identifier: GPL-2.0 ibm-pibs + */ #include <config.h> #include <asm/ppc4xx.h> diff --git a/board/davinci/ea20/ea20.c b/board/davinci/ea20/ea20.c index c786997..c4444c7 100644 --- a/board/davinci/ea20/ea20.c +++ b/board/davinci/ea20/ea20.c @@ -24,7 +24,7 @@ #include <asm/io.h> #include <asm/arch/davinci_misc.h> #include <asm/gpio.h> -#include <asm/arch/da8xx-fb.h> +#include "../../../drivers/video/da8xx-fb.h" DECLARE_GLOBAL_DATA_PTR; @@ -43,6 +43,30 @@ static const struct da8xx_panel lcd_panel = { .invert_pxl_clk = 0, }; +static const struct display_panel disp_panel = { + QVGA, + 16, + 16, + COLOR_ACTIVE, +}; + +static const struct lcd_ctrl_config lcd_cfg = { + &disp_panel, + .ac_bias = 255, + .ac_bias_intrpt = 0, + .dma_burst_sz = 16, + .bpp = 16, + .fdd = 255, + .tft_alt_mode = 0, + .stn_565_mode = 0, + .mono_8bit_mode = 0, + .invert_line_clock = 1, + .invert_frm_clock = 1, + .sync_edge = 0, + .sync_ctrl = 1, + .raster_order = 0, +}; + /* SPI0 pin muxer settings */ static const struct pinmux_config spi1_pins[] = { { pinmux(5), 1, 1 }, @@ -259,7 +283,7 @@ int board_init(void) /* address of boot parameters */ gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; - da8xx_video_init(&lcd_panel, 16); + da8xx_video_init(&lcd_panel, &lcd_cfg, 16); return 0; } diff --git a/board/esd/canbt/canbt.c b/board/esd/canbt/canbt.c deleted file mode 100644 index 5884975..0000000 --- a/board/esd/canbt/canbt.c +++ /dev/null @@ -1,164 +0,0 @@ -/* - * (C) Copyright 2001 - * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include "canbt.h" -#include <asm/processor.h> -#include <asm/io.h> -#include <command.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* ------------------------------------------------------------------------- */ - -#if 0 -#define FPGA_DEBUG -#endif - -/* fpga configuration data */ -const unsigned char fpgadata[] = { -#include "fpgadata.c" -}; - -/* - * include common fpga code (for esd boards) - */ -#include "../common/fpga.c" - - -int board_early_init_f (void) -{ - unsigned long CPC0_CR0Reg; - int index, len, i; - int status; - - /* - * Setup GPIO pins - */ - CPC0_CR0Reg = mfdcr (CPC0_CR0) & 0xf0001fff; - CPC0_CR0Reg |= 0x0070f000; - mtdcr (CPC0_CR0, CPC0_CR0Reg); - -#ifdef FPGA_DEBUG - /* set up serial port with default baudrate */ - (void) get_clocks (); - gd->baudrate = CONFIG_BAUDRATE; - serial_init (); - console_init_f (); -#endif - - /* - * Boot onboard FPGA - */ - status = fpga_boot ((unsigned char *) fpgadata, sizeof (fpgadata)); - if (status != 0) { - /* booting FPGA failed */ -#ifndef FPGA_DEBUG - /* set up serial port with default baudrate */ - (void) get_clocks (); - gd->baudrate = CONFIG_BAUDRATE; - serial_init (); - console_init_f (); -#endif - printf ("\nFPGA: Booting failed "); - switch (status) { - case ERROR_FPGA_PRG_INIT_LOW: - printf ("(Timeout: INIT not low after asserting PROGRAM*)\n "); - break; - case ERROR_FPGA_PRG_INIT_HIGH: - printf ("(Timeout: INIT not high after deasserting PROGRAM*)\n "); - break; - case ERROR_FPGA_PRG_DONE: - printf ("(Timeout: DONE not high after programming FPGA)\n "); - break; - } - - /* display infos on fpgaimage */ - index = 15; - for (i = 0; i < 4; i++) { - len = fpgadata[index]; - printf ("FPGA: %s\n", &(fpgadata[index + 1])); - index += len + 3; - } - putc ('\n'); - /* delayed reboot */ - for (i = 20; i > 0; i--) { - printf ("Rebooting in %2d seconds \r", i); - for (index = 0; index < 1000; index++) - udelay (1000); - } - putc ('\n'); - do_reset (NULL, 0, 0, NULL); - } - - /* - * Setup port pins for normal operation - */ - out_be32 ((void *)GPIO0_ODR, 0x00000000); /* no open drain pins */ - out_be32 ((void *)GPIO0_TCR, 0x07038100); /* setup for output */ - out_be32 ((void *)GPIO0_OR, 0x07030100); /* set output pins to high (default) */ - - /* - * IRQ 0-15 405GP internally generated; active high; level sensitive - * IRQ 16 405GP internally generated; active low; level sensitive - * IRQ 17-24 RESERVED - * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive - * IRQ 26 (EXT IRQ 1) CAN1; active low; level sensitive - * IRQ 27 (EXT IRQ 2) PCI SLOT 0; active low; level sensitive - * IRQ 28 (EXT IRQ 3) PCI SLOT 1; active low; level sensitive - * IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive - * IRQ 30 (EXT IRQ 5) PCI SLOT 3; active low; level sensitive - * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive - */ - mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */ - mtdcr (UIC0ER, 0x00000000); /* disable all ints */ - mtdcr (UIC0CR, 0x00000000); /* set all to be non-critical */ - mtdcr (UIC0PR, 0xFFFFFF81); /* set int polarities */ - mtdcr (UIC0TR, 0x10000000); /* set int trigger levels */ - mtdcr (UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */ - mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */ - - return 0; -} - - -/* ------------------------------------------------------------------------- */ - -/* - * Check Board Identity: - */ - -int checkboard (void) -{ - int index; - int len; - char str[64]; - int i = getenv_f("serial#", str, sizeof (str)); - - puts ("Board: "); - - if (!i || strncmp (str, "CANBT", 5)) { - puts ("### No HW ID - assuming CANBT\n"); - return (0); - } - - puts (str); - - puts ("\nFPGA: "); - - /* display infos on fpgaimage */ - index = 15; - for (i = 0; i < 4; i++) { - len = fpgadata[index]; - printf ("%s ", &(fpgadata[index + 1])); - index += len + 3; - } - - putc ('\n'); - - return 0; -} diff --git a/board/esd/canbt/canbt.h b/board/esd/canbt/canbt.h deleted file mode 100644 index 75e7950..0000000 --- a/board/esd/canbt/canbt.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/**************************************************************************** - * FLASH Memory Map as used by TQ Monitor: - * - * Start Address Length - * +-----------------------+ 0x4000_0000 Start of Flash ----------------- - * | MON8xx code | 0x4000_0100 Reset Vector - * +-----------------------+ 0x400?_???? - * | (unused) | - * +-----------------------+ 0x4001_FF00 - * | Ethernet Addresses | 0x78 - * +-----------------------+ 0x4001_FF78 - * | (Reserved for MON8xx) | 0x44 - * +-----------------------+ 0x4001_FFBC - * | Lock Address | 0x04 - * +-----------------------+ 0x4001_FFC0 ^ - * | Hardware Information | 0x40 | MON8xx - * +=======================+ 0x4002_0000 (sector border) ----------------- - * | Autostart Header | | Applications - * | ... | v - * - *****************************************************************************/ diff --git a/board/esd/canbt/flash.c b/board/esd/canbt/flash.c deleted file mode 100644 index 34bdc05..0000000 --- a/board/esd/canbt/flash.c +++ /dev/null @@ -1,68 +0,0 @@ -/* - * (C) Copyright 2001 - * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/ppc4xx.h> -#include <asm/processor.h> - -/* - * include common flash code (for esd boards) - */ -#include "../common/flash.c" - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size (vu_long *addr, flash_info_t *info); -static void flash_get_offsets (ulong base, flash_info_t *info); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init (void) -{ - unsigned long size_b0; - int i; - uint pbcr; - unsigned long base_b0; - - /* Init: no FLASHes known */ - for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) { - flash_info[i].flash_id = FLASH_UNKNOWN; - } - - /* Static FLASH Bank configuration here - FIXME XXX */ - - size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]); - - if (flash_info[0].flash_id == FLASH_UNKNOWN) { - printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", - size_b0, size_b0<<20); - } - - /* Setup offsets */ - flash_get_offsets (-size_b0, &flash_info[0]); - - /* Re-do sizing to get full correct info */ - mtdcr(EBC0_CFGADDR, PB0CR); - pbcr = mfdcr(EBC0_CFGDATA); - mtdcr(EBC0_CFGADDR, PB0CR); - base_b0 = -size_b0; - pbcr = (pbcr & 0x0001ffff) | base_b0 | (((size_b0/1024/1024)-1)<<17); - mtdcr(EBC0_CFGDATA, pbcr); - /* printf("PB1CR = %x\n", pbcr); */ - - /* Monitor protection ON by default */ - (void)flash_protect(FLAG_PROTECT_SET, - -monitor_flash_len, - 0xffffffff, - &flash_info[0]); - - flash_info[0].size = size_b0; - - return (size_b0); -} diff --git a/board/esd/canbt/fpgadata.c b/board/esd/canbt/fpgadata.c deleted file mode 100644 index af401cd..0000000 --- a/board/esd/canbt/fpgadata.c +++ /dev/null @@ -1,807 +0,0 @@ -0x00, 0x09, 0x0f, 0xf0, 0x0f, 0xf0, 0x0f, 0xf0, -0x0f, 0xf0, 0x00, 0x00, 0x01, 0x61, 0x00, 0x0c, -0x69, 0x6f, 0x5f, 0x63, 0x68, 0x69, 0x70, 0x2e, -0x6e, 0x63, 0x64, 0x00, 0x62, 0x00, 0x0b, 0x73, -0x30, 0x35, 0x78, 0x6c, 0x76, 0x71, 0x31, 0x30, -0x30, 0x00, 0x63, 0x00, 0x0b, 0x32, 0x30, 0x30, -0x31, 0x2f, 0x31, 0x31, 0x2f, 0x32, 0x33, 0x00, -0x64, 0x00, 0x09, 0x31, 0x33, 0x3a, 0x33, 0x34, -0x3a, 0x34, 0x33, 0x00, 0x65, 0xe2, 0x01, 0x00, -0x00, 0x18, 0xe6, 0xff, 0x30, 0xe8, 0x01, 0x01, -0x01, 0x01, 0xe7, 0xe6, 0x04, 0x01, 0x0d, 0x04, -0x07, 0x03, 0x05, 0x03, 0x05, 0x03, 0xe5, 0xe5, -0x05, 0x09, 0x04, 0x06, 0x01, 0x07, 0x09, 0x01, -0x07, 0x0b, 0x0f, 0x07, 0x03, 0x05, 0x03, 0x05, -0x03, 0x11, 0x03, 0x0f, 0x09, 0x03, 0x05, 0x10, -0xe5, 0xe6, 0x1a, 0x0a, 0x13, 0x29, 0x19, 0x05, -0x09, 0x04, 0x04, 0x09, 0x09, 0x09, 0x0b, 0x04, -0x04, 0x09, 0x09, 0x09, 0x0e, 0xe5, 0x01, 0x14, -0x09, 0x09, 0x09, 0x03, 0x05, 0x0b, 0x03, 0x05, -0x09, 0x09, 0x09, 0x09, 0x01, 0xe6, 0x7b, 0x01, -0x01, 0x02, 0x75, 0xe8, 0x3e, 0x3b, 0x02, 0x34, -0x0a, 0x09, 0x07, 0x09, 0x01, 0x11, 0x0a, 0xe5, -0xe6, 0x5c, 0x1e, 0xe6, 0xe5, 0x0a, 0xe5, 0x50, -0x1d, 0x0d, 0x31, 0x09, 0x14, 0x13, 0x07, 0x01, -0x01, 0x2a, 0x08, 0x0b, 0x1e, 0x1c, 0x01, 0xe5, -0x0f, 0x09, 0x09, 0xe5, 0x07, 0x09, 0xe6, 0x08, -0x05, 0x03, 0x01, 0x07, 0x09, 0x09, 0x0d, 0xe8, -0x0f, 0x09, 0xe5, 0x07, 0x09, 0x04, 0x05, 0x0a, -0x01, 0x07, 0x01, 0x07, 0x09, 0x09, 0x0d, 0xe5, -0xe6, 0x0c, 0xe5, 0x07, 0xe5, 0x07, 0xe5, 0x07, -0xe5, 0x03, 0x03, 0xe5, 0x06, 0xe5, 0xe6, 0x03, -0x03, 0xe5, 0x04, 0x02, 0xe5, 0x01, 0x05, 0xe5, -0x07, 0xe5, 0x01, 0x07, 0x05, 0xe7, 0x0f, 0x09, -0x09, 0x09, 0x10, 0x04, 0x05, 0x03, 0x03, 0x05, -0x09, 0x09, 0x08, 0x08, 0x04, 0x01, 0x06, 0xe5, -0x07, 0xe5, 0x07, 0xe5, 0x07, 0xe5, 0x07, 0xe5, -0x02, 0xe5, 0x04, 0xe5, 0x07, 0xe5, 0x07, 0xe5, -0x07, 0xe5, 0x02, 0x04, 0xe5, 0x07, 0x02, 0x03, -0x02, 0xe5, 0x0e, 0x09, 0x09, 0x09, 0x15, 0x09, -0x09, 0x09, 0x09, 0x0e, 0xe6, 0xe5, 0x0c, 0x09, -0x09, 0x09, 0x09, 0x04, 0x04, 0x01, 0x09, 0x06, -0x02, 0x09, 0x09, 0x11, 0xe7, 0x0c, 0x02, 0x06, -0x02, 0x04, 0x01, 0x02, 0x01, 0x01, 0x02, 0x02, -0x06, 0x02, 0x03, 0x02, 0x01, 0x02, 0x06, 0x02, -0x01, 0x04, 0x02, 0x06, 0x02, 0x03, 0x02, 0x02, -0x11, 0x03, 0x17, 0x03, 0x05, 0x12, 0x15, 0x02, -0x23, 0x08, 0x16, 0x06, 0x0c, 0x05, 0x15, 0x07, -0x01, 0x0a, 0x02, 0x0f, 0x01, 0x07, 0x02, 0xe5, -0xe5, 0x08, 0x07, 0x02, 0x07, 0x02, 0x10, 0x03, -0x11, 0x03, 0x2b, 0x05, 0xe6, 0x2b, 0x0a, 0x06, -0x01, 0x01, 0x11, 0x0b, 0x0e, 0xe5, 0x08, 0xe6, -0xe5, 0x0f, 0x09, 0x09, 0x09, 0x09, 0x0b, 0x09, -0x09, 0x01, 0x07, 0x09, 0x0e, 0x01, 0xe5, 0x0f, -0x0d, 0x22, 0xe5, 0xe5, 0x27, 0x0e, 0xe6, 0x47, -0x11, 0x17, 0x02, 0x04, 0x01, 0x01, 0x0d, 0x0d, -0x1f, 0x04, 0x01, 0x24, 0x10, 0x03, 0x01, 0x2a, -0x12, 0x0c, 0x06, 0xe5, 0x0a, 0x09, 0x11, 0xe5, -0x01, 0x1c, 0x09, 0x17, 0x0b, 0x09, 0x09, 0x04, -0x19, 0xe5, 0x0c, 0x01, 0x0d, 0x22, 0x0a, 0x01, -0x0d, 0xe5, 0x04, 0x18, 0x01, 0xe5, 0x01, 0x05, -0x04, 0x01, 0x02, 0xe5, 0x14, 0x10, 0x0b, 0x02, -0x01, 0x02, 0x02, 0xe5, 0x19, 0x0d, 0xe5, 0xe5, -0x0e, 0x09, 0x09, 0x02, 0x06, 0x09, 0x02, 0x03, -0x04, 0x03, 0x05, 0x09, 0x15, 0x0c, 0x02, 0xe5, -0x01, 0x0b, 0x04, 0x04, 0x09, 0x09, 0x02, 0x06, -0x09, 0xe5, 0x01, 0x06, 0x05, 0x03, 0x06, 0x1e, -0x02, 0x1c, 0x1d, 0x08, 0xe5, 0x05, 0x02, 0x06, -0x02, 0x03, 0xe5, 0x1b, 0x03, 0x17, 0xe5, 0x08, -0x02, 0x09, 0xe5, 0x09, 0x0f, 0xe5, 0x08, 0x07, -0x09, 0x06, 0x0b, 0x02, 0x17, 0xe5, 0x09, 0x01, -0x1f, 0x05, 0xe5, 0x02, 0x05, 0x03, 0x1f, 0xe5, -0xe6, 0x0e, 0x09, 0x03, 0x05, 0x03, 0x05, 0x09, -0x11, 0x01, 0x01, 0x04, 0x0c, 0x01, 0x0a, 0x0e, -0x01, 0xe5, 0x0c, 0xe6, 0x06, 0xe6, 0x06, 0xe6, -0x06, 0xe6, 0x02, 0x03, 0xe6, 0x03, 0x03, 0x02, -0x09, 0x06, 0xe5, 0xe5, 0x25, 0x14, 0x1a, 0x12, -0x05, 0x04, 0x02, 0x13, 0x16, 0xe7, 0xe5, 0x11, -0xe5, 0x11, 0xe5, 0x06, 0xe5, 0x14, 0xe5, 0x11, -0xe5, 0x03, 0xe5, 0x08, 0xe5, 0x06, 0x01, 0x02, -0x02, 0x02, 0x01, 0x2c, 0xe5, 0x08, 0x01, 0x1d, -0xe5, 0xe6, 0x01, 0x02, 0x01, 0x04, 0x09, 0x01, -0x02, 0xe6, 0x03, 0x04, 0xe5, 0x02, 0x01, 0x02, -0xe5, 0x02, 0x01, 0x07, 0x01, 0x07, 0x01, 0x07, -0x01, 0x02, 0xe5, 0x04, 0x01, 0x07, 0x05, 0xe5, -0x01, 0x01, 0x02, 0xe5, 0x07, 0xe5, 0x01, 0x01, -0xe5, 0x09, 0xe5, 0xe5, 0xe7, 0x01, 0x0e, 0x08, -0x03, 0xe5, 0x04, 0x02, 0x06, 0x02, 0xe5, 0x04, -0x0d, 0xe5, 0x07, 0xe5, 0x08, 0xe5, 0x07, 0x05, -0x07, 0x02, 0x01, 0x01, 0xe8, 0xe5, 0x10, 0x01, -0x05, 0x0c, 0x10, 0xe5, 0x01, 0x06, 0xe5, 0x08, -0x08, 0xe6, 0x01, 0x02, 0x05, 0xe5, 0x04, 0xe5, -0x01, 0x06, 0xe5, 0x01, 0xe5, 0x01, 0x10, 0x02, -0x05, 0xe5, 0x01, 0x06, 0x02, 0x06, 0x02, 0x05, -0x03, 0x07, 0xe5, 0x01, 0x05, 0xe5, 0x01, 0x05, -0x04, 0x03, 0x03, 0xe5, 0x04, 0x08, 0xe6, 0xe5, -0xe6, 0x01, 0x0b, 0x05, 0x03, 0x09, 0x09, 0x09, -0x06, 0x04, 0x05, 0x01, 0x01, 0x09, 0x05, 0x0a, -0x01, 0x01, 0x02, 0x08, 0x02, 0xe5, 0xe6, 0x01, -0x11, 0xe5, 0x31, 0x14, 0x10, 0x0a, 0x02, 0xe8, -0x0c, 0x03, 0xe6, 0x02, 0x03, 0x05, 0x03, 0x05, -0x03, 0x02, 0x02, 0x03, 0x02, 0x04, 0x03, 0x01, -0x03, 0x03, 0x05, 0x0d, 0xe5, 0x06, 0x0b, 0x01, -0x01, 0x11, 0x0c, 0x01, 0x04, 0x02, 0x01, 0x04, -0x02, 0x09, 0x0b, 0x01, 0x07, 0x01, 0x07, 0x09, -0x13, 0xe6, 0xe6, 0x0a, 0x02, 0x06, 0x02, 0x03, -0x02, 0x02, 0x04, 0xe6, 0x01, 0x05, 0xe5, 0x01, -0x03, 0x07, 0x03, 0x02, 0x02, 0x05, 0xe5, 0x01, -0x03, 0x02, 0x02, 0x03, 0xe5, 0xe5, 0x01, 0x06, -0x04, 0x01, 0x01, 0xe5, 0xe5, 0x01, 0x08, 0xe5, -0x07, 0xe5, 0x07, 0xe5, 0x08, 0x08, 0xe5, 0x08, -0x0a, 0xe5, 0x05, 0x09, 0x02, 0x09, 0x05, 0xe5, -0x01, 0x07, 0xe5, 0xe6, 0x08, 0x05, 0x03, 0x05, -0x03, 0x05, 0x05, 0x03, 0x03, 0x05, 0x03, 0x07, -0x03, 0x05, 0x09, 0x03, 0x0a, 0x08, 0x0d, 0xe5, -0x5e, 0x06, 0x07, 0x0b, 0xe8, 0x10, 0x01, 0x07, -0x09, 0x01, 0x07, 0x01, 0x07, 0x0b, 0x09, 0x09, -0x08, 0x03, 0x06, 0x0c, 0xe8, 0x09, 0x54, 0x01, -0x0d, 0x02, 0x07, 0x01, 0x01, 0x15, 0xe5, 0x05, -0xe7, 0x05, 0xe7, 0x07, 0xe5, 0x06, 0xe6, 0x08, -0xe6, 0x05, 0xe7, 0x06, 0xe7, 0xe5, 0x02, 0xe7, -0x05, 0xe7, 0x0a, 0x10, 0xe5, 0x07, 0x09, 0x33, -0x06, 0x0b, 0x0f, 0xe7, 0x19, 0x05, 0x03, 0x02, -0x02, 0x13, 0x0b, 0x09, 0x03, 0x05, 0x06, 0x02, -0xe5, 0x07, 0x08, 0x02, 0xe5, 0x1b, 0xe6, 0x07, -0xe5, 0x11, 0xe5, 0x01, 0x07, 0xe5, 0x06, 0xe6, -0x07, 0xe5, 0xe5, 0xe5, 0x03, 0xe5, 0x02, 0x03, -0xe6, 0x0a, 0xe5, 0x02, 0x0e, 0x09, 0xe5, 0xe6, -0x04, 0xe8, 0x04, 0x09, 0xe5, 0xe6, 0x06, 0xe5, -0xe6, 0x04, 0xe5, 0xe6, 0x04, 0xe5, 0xe7, 0xe6, -0x01, 0x01, 0xe6, 0x03, 0xe8, 0x06, 0x01, 0x01, -0x0e, 0x01, 0x03, 0x03, 0x01, 0x07, 0x01, 0x07, -0x01, 0xe5, 0x05, 0x01, 0x09, 0x01, 0x07, 0x01, -0x07, 0x01, 0x01, 0x08, 0x08, 0x01, 0x0a, 0xe9, -0x10, 0x01, 0x01, 0x05, 0x01, 0xe5, 0x05, 0x01, -0xe6, 0x04, 0x01, 0xe6, 0x04, 0x01, 0x01, 0x02, -0x03, 0xe5, 0xe5, 0xe5, 0x03, 0xe5, 0xe5, 0x06, -0x01, 0x02, 0x04, 0x01, 0x07, 0x01, 0xe5, 0x08, -0x01, 0xe6, 0x0e, 0xe5, 0x02, 0x0e, 0xe5, 0x07, -0xe5, 0x07, 0xe5, 0xe5, 0x0d, 0x09, 0xe5, 0x06, -0x04, 0xe5, 0x05, 0x01, 0xe5, 0x0c, 0xe6, 0xe6, -0x1e, 0x07, 0x15, 0x07, 0x09, 0xe5, 0x0d, 0xe5, -0xe5, 0xe5, 0x01, 0x01, 0x09, 0x04, 0xe6, 0xe6, -0x04, 0x02, 0x04, 0x01, 0x02, 0x09, 0x04, 0x01, -0x02, 0x04, 0x01, 0x07, 0x01, 0x04, 0x02, 0x08, -0x0b, 0x06, 0x0e, 0x10, 0xe5, 0xe6, 0x0b, 0x01, -0x07, 0x01, 0x03, 0xe5, 0x01, 0x01, 0x07, 0x01, -0x07, 0x01, 0x02, 0x05, 0x09, 0x17, 0x04, 0x03, -0x03, 0x09, 0xe7, 0xe5, 0x0d, 0x01, 0x07, 0x01, -0x07, 0x01, 0x04, 0x02, 0x01, 0x07, 0x01, 0x04, -0x01, 0x0a, 0x07, 0x06, 0x01, 0x02, 0x0a, 0x13, -0xe6, 0x0d, 0x03, 0x05, 0x09, 0x03, 0x05, 0x09, -0x03, 0x03, 0x03, 0x02, 0x05, 0xe5, 0x02, 0x04, -0xe5, 0x07, 0xe5, 0x01, 0x03, 0x02, 0x0d, 0x01, -0x02, 0x0d, 0x02, 0x02, 0x03, 0x09, 0x02, 0x06, -0x04, 0x04, 0x02, 0xe5, 0x04, 0x01, 0x05, 0x03, -0x01, 0xe5, 0x05, 0x01, 0x07, 0x01, 0x08, 0x0c, -0x06, 0x06, 0x02, 0x05, 0xe6, 0x06, 0xe6, 0x06, -0xe5, 0x07, 0xe5, 0x07, 0xe5, 0xe5, 0x03, 0xe5, -0x01, 0xe5, 0xe5, 0xe5, 0x06, 0x09, 0x01, 0xe5, -0x17, 0x03, 0x01, 0xe6, 0x09, 0x02, 0xe5, 0x07, -0xe5, 0x07, 0xe5, 0x07, 0xe5, 0x07, 0xe5, 0x07, -0x01, 0xe6, 0x07, 0x11, 0xe5, 0xe5, 0x09, 0x02, -0x0e, 0x0b, 0x04, 0x01, 0x03, 0x03, 0x09, 0x01, -0x07, 0x04, 0x04, 0x02, 0xe5, 0xe6, 0x03, 0x07, -0x18, 0xe5, 0x13, 0xe5, 0xe6, 0x0c, 0xe5, 0x03, -0x03, 0xe5, 0x07, 0xe5, 0x02, 0x04, 0xe5, 0x07, -0xe5, 0x0a, 0x03, 0xe5, 0x01, 0x01, 0x07, 0x01, -0xe5, 0x03, 0xe5, 0x09, 0x01, 0x0a, 0x02, 0x03, -0xe5, 0x0c, 0xe6, 0x06, 0xe6, 0x01, 0x04, 0xe6, -0x06, 0xe7, 0xe5, 0x03, 0xe6, 0x01, 0x05, 0x02, -0x09, 0x05, 0x03, 0x07, 0x01, 0x02, 0x06, 0x0a, -0x03, 0xe5, 0xe6, 0xe5, 0x06, 0x1c, 0x1a, 0xe5, -0x02, 0x05, 0x0a, 0x12, 0x02, 0x0c, 0xe5, 0x01, -0x01, 0x1b, 0xe5, 0x04, 0x03, 0x01, 0x06, 0xe5, -0x10, 0xe5, 0x01, 0xe5, 0x03, 0xe5, 0x12, 0xe5, -0x06, 0xe5, 0x07, 0x01, 0x03, 0xe9, 0xe5, 0x17, -0xe5, 0x08, 0xe5, 0x06, 0xe5, 0x08, 0xe5, 0x09, -0xe5, 0x17, 0x03, 0x01, 0x0e, 0x01, 0x01, 0x02, -0x02, 0x01, 0x04, 0xe5, 0x02, 0x04, 0xe5, 0x02, -0x09, 0x09, 0x09, 0x04, 0xe5, 0x04, 0x01, 0xe5, -0x05, 0x01, 0xe5, 0x05, 0x01, 0x08, 0xe5, 0x01, -0xe5, 0x05, 0xe5, 0x07, 0xe5, 0x01, 0x01, 0xe5, -0x01, 0x1b, 0x09, 0xe5, 0x07, 0x14, 0xe5, 0x05, -0x01, 0xe5, 0x04, 0x02, 0xe5, 0x01, 0x06, 0x0d, -0x02, 0x01, 0xe5, 0x02, 0xe5, 0xe5, 0x06, 0x01, -0x05, 0xe5, 0x01, 0x05, 0x02, 0x10, 0xe5, 0xe6, -0x04, 0x01, 0x01, 0x06, 0x01, 0x02, 0x0f, 0xe5, -0x01, 0xe5, 0x02, 0xe5, 0x01, 0x08, 0x01, 0x06, -0xe5, 0xe7, 0x01, 0x06, 0x02, 0x05, 0x01, 0x01, -0x05, 0x03, 0x07, 0x01, 0x05, 0x01, 0x01, 0x05, -0x0d, 0x01, 0x0f, 0x04, 0x04, 0x08, 0x01, 0x02, -0x04, 0xe6, 0x01, 0xe6, 0x01, 0x0b, 0x09, 0x06, -0x02, 0x09, 0x09, 0x0b, 0x05, 0x03, 0x09, 0x0a, -0x02, 0x06, 0x08, 0x02, 0x02, 0xe6, 0xe5, 0x12, -0xe5, 0x11, 0xe5, 0x1d, 0xe6, 0x14, 0x04, 0xe6, -0x01, 0x0f, 0x03, 0xe6, 0x07, 0x05, 0x03, 0x02, -0x02, 0x03, 0x05, 0x03, 0xe5, 0x03, 0x03, 0x02, -0x02, 0x03, 0x02, 0x04, 0x03, 0xe5, 0x03, 0x03, -0x05, 0x03, 0x08, 0xe5, 0x01, 0x12, 0xe5, 0xe5, -0xe5, 0x07, 0x01, 0x07, 0xe5, 0x07, 0x01, 0x04, -0x16, 0x08, 0x02, 0xe5, 0x04, 0x02, 0x01, 0x07, -0x01, 0x07, 0xe5, 0x07, 0x09, 0xe5, 0x01, 0xe5, -0x09, 0xe5, 0x01, 0x06, 0x02, 0x03, 0x02, 0x02, -0x06, 0x02, 0x06, 0x02, 0x03, 0x07, 0x06, 0x02, -0x03, 0x05, 0x03, 0xe5, 0xe5, 0x01, 0x04, 0x01, -0x02, 0x05, 0xe5, 0x05, 0x01, 0xe5, 0xe5, 0x0a, -0xe5, 0x07, 0xe5, 0x07, 0xe5, 0x07, 0x09, 0xe5, -0x08, 0x0a, 0xe5, 0x08, 0x09, 0x05, 0x03, 0x06, -0x02, 0x07, 0xe8, 0x08, 0x05, 0x03, 0x05, 0x03, -0x05, 0x09, 0x03, 0x05, 0x05, 0x05, 0x03, 0x05, -0x03, 0x05, 0x04, 0x09, 0x0a, 0x08, 0xe5, 0xe6, -0x5b, 0x07, 0x17, 0xe6, 0x01, 0x0e, 0x09, 0x09, -0x01, 0x07, 0x09, 0x0b, 0x01, 0x07, 0x01, 0x07, -0x05, 0x03, 0x04, 0xe5, 0x01, 0x0e, 0xe5, 0xe6, -0x1c, 0x1c, 0xe5, 0x1e, 0x04, 0x09, 0x0e, 0x01, -0xe6, 0x08, 0x0b, 0xe5, 0x05, 0x01, 0xe5, 0x05, -0x01, 0xe5, 0x07, 0xe5, 0x05, 0x01, 0xe5, 0x07, -0xe7, 0x05, 0xe7, 0x05, 0x01, 0xe6, 0x04, 0x01, -0xe6, 0x04, 0xe7, 0x06, 0x02, 0xe5, 0xe5, 0x0d, -0xe5, 0x07, 0x29, 0x09, 0x09, 0x08, 0x09, 0x0e, -0x03, 0x20, 0x09, 0x13, 0x05, 0x05, 0x03, 0x05, -0x09, 0x09, 0xe5, 0x07, 0x09, 0xe6, 0x19, 0x02, -0x01, 0x07, 0x01, 0x11, 0x01, 0x02, 0x06, 0xe6, -0x06, 0xe6, 0x03, 0x02, 0x01, 0x07, 0x01, 0x03, -0x03, 0xe6, 0x07, 0xe5, 0xe6, 0x11, 0x09, 0xe8, -0x04, 0x01, 0xe6, 0x04, 0x09, 0xe8, 0x06, 0xe5, -0xe6, 0x04, 0xe5, 0xe6, 0x04, 0xe8, 0x04, 0xe9, -0x04, 0x01, 0xe5, 0x06, 0x03, 0xe5, 0x0b, 0xe5, -0xe5, 0x05, 0xe5, 0xe5, 0x05, 0xe5, 0xe5, 0x05, -0xe5, 0xe5, 0x05, 0xe5, 0xe5, 0x07, 0xe5, 0xe5, -0x05, 0xe5, 0xe6, 0x04, 0x02, 0x06, 0x02, 0x01, -0x14, 0xe9, 0x05, 0x0a, 0x01, 0xe5, 0x05, 0x01, -0xe5, 0x05, 0x01, 0xe6, 0x04, 0x01, 0x01, 0x05, -0x01, 0xe6, 0x01, 0x04, 0x01, 0x01, 0x05, 0x01, -0xe6, 0x01, 0x02, 0x01, 0x01, 0x05, 0x01, 0x01, -0x05, 0x01, 0x02, 0x07, 0xe8, 0x02, 0x05, 0x04, -0x07, 0x01, 0xe5, 0x07, 0x03, 0x02, 0x02, 0x09, -0x04, 0x01, 0x04, 0x04, 0xe5, 0x02, 0xe6, 0x02, -0x02, 0x02, 0x03, 0x02, 0xe5, 0x01, 0x1a, 0xe5, -0x1a, 0x02, 0x06, 0x0a, 0x02, 0x16, 0x08, 0xe5, -0x06, 0x04, 0x02, 0x02, 0x0d, 0xe5, 0xe5, 0x01, -0xe6, 0x12, 0x04, 0x1b, 0x04, 0x05, 0x0a, 0x02, -0x02, 0x07, 0x0b, 0x15, 0xe5, 0x01, 0xe5, 0x0b, -0xe6, 0x03, 0x02, 0xe6, 0x03, 0x02, 0xe6, 0x03, -0x02, 0xe7, 0x05, 0xe6, 0x02, 0x08, 0x09, 0x06, -0xe6, 0x01, 0x02, 0x03, 0x09, 0xe5, 0x01, 0x09, -0x04, 0x09, 0x03, 0x09, 0x09, 0x09, 0x09, 0x03, -0x03, 0x01, 0xe5, 0x07, 0x0b, 0x19, 0x0c, 0xe7, -0x08, 0x08, 0x06, 0xe6, 0x0c, 0x01, 0xe6, 0x04, -0x0a, 0xe5, 0x05, 0xe5, 0x03, 0x02, 0x0a, 0x03, -0x05, 0x03, 0x05, 0x09, 0x04, 0x10, 0x13, 0x06, -0x02, 0x09, 0x02, 0x03, 0x04, 0x04, 0x04, 0x09, -0x0f, 0x12, 0x02, 0x01, 0x04, 0x15, 0x02, 0x08, -0x02, 0x04, 0x0e, 0x08, 0x05, 0x28, 0x04, 0x01, -0x03, 0x19, 0x20, 0xe6, 0x08, 0x06, 0x10, 0x19, -0x01, 0x06, 0x01, 0x1d, 0x15, 0x02, 0x0a, 0x08, -0x06, 0x01, 0xe6, 0x06, 0x07, 0x0b, 0x02, 0xe7, -0xe5, 0x05, 0x09, 0x01, 0x11, 0x04, 0xe5, 0x02, -0x04, 0xe5, 0x04, 0x01, 0x08, 0x07, 0x08, 0xe5, -0x05, 0x16, 0x01, 0x02, 0x19, 0x10, 0x01, 0x0a, -0x08, 0x0d, 0x0a, 0x0b, 0x0a, 0x09, 0x01, 0x01, -0x19, 0x0e, 0x07, 0x04, 0xe5, 0x1a, 0x28, 0x02, -0x01, 0x26, 0xe5, 0x04, 0x11, 0x02, 0xe5, 0x01, -0xe5, 0xe5, 0x08, 0x02, 0xe5, 0x07, 0xe5, 0x13, -0x01, 0xe5, 0xe9, 0xe5, 0x1b, 0xe5, 0x12, 0xe5, -0x03, 0x01, 0x02, 0x03, 0x01, 0xe5, 0x01, 0xe6, -0x03, 0x01, 0xe5, 0x0c, 0x11, 0x01, 0x01, 0xe5, -0xe5, 0xe5, 0x01, 0x01, 0x12, 0x01, 0x09, 0x02, -0x01, 0xe5, 0xe5, 0xe7, 0x01, 0xe5, 0x03, 0x08, -0x06, 0x01, 0xe5, 0x01, 0x01, 0x04, 0x03, 0x16, -0x01, 0x02, 0x01, 0xe5, 0xe6, 0x01, 0x02, 0x11, -0xe5, 0xe5, 0xe5, 0x06, 0x06, 0xe5, 0xe5, 0xe5, -0x02, 0xe5, 0x05, 0x07, 0x0b, 0x07, 0x19, 0xe5, -0x05, 0x02, 0xe6, 0xe6, 0xe5, 0x01, 0x03, 0x02, -0x16, 0x09, 0x01, 0x01, 0x02, 0x02, 0x09, 0x09, -0x01, 0x01, 0xe5, 0x03, 0x23, 0xe5, 0x01, 0xe5, -0x01, 0x06, 0x02, 0x0e, 0x05, 0x03, 0x0c, 0x01, -0x02, 0x01, 0x07, 0x03, 0x05, 0x01, 0x01, 0x05, -0x03, 0x1d, 0xe5, 0x02, 0x01, 0x02, 0x14, 0x01, -0x09, 0x07, 0x04, 0x01, 0x0e, 0x04, 0x04, 0x03, -0xe5, 0xe5, 0xe6, 0x03, 0x19, 0x02, 0x02, 0x03, -0x17, 0x01, 0x07, 0x09, 0x04, 0x01, 0xe5, 0x0c, -0x09, 0x01, 0x04, 0x01, 0xe5, 0x25, 0x01, 0xe5, -0x03, 0x03, 0x26, 0xe5, 0xe5, 0x05, 0x0c, 0x08, -0x0a, 0xe5, 0x1b, 0x02, 0xe6, 0x09, 0x01, 0x22, -0x02, 0x01, 0x13, 0x01, 0x04, 0x02, 0xe5, 0x11, -0xe5, 0x12, 0xe5, 0xe6, 0x07, 0x05, 0x09, 0x09, -0x09, 0x03, 0x05, 0x0b, 0x03, 0x05, 0x09, 0x09, -0x09, 0x06, 0x06, 0x03, 0xe5, 0x29, 0x05, 0x03, -0x05, 0x0f, 0x05, 0x20, 0x0b, 0xe5, 0x27, 0x09, -0x14, 0x07, 0x2b, 0xe7, 0x15, 0x02, 0x16, 0x10, -0x01, 0x04, 0x02, 0x09, 0x01, 0x07, 0x01, 0x18, -0x03, 0x19, 0xe5, 0x0c, 0x02, 0x01, 0x01, 0x01, -0x06, 0xe5, 0x03, 0x02, 0x01, 0xe5, 0x07, 0xe6, -0x04, 0x01, 0xe5, 0x04, 0xe5, 0xe6, 0x16, 0x03, -0xe5, 0x17, 0x22, 0x0b, 0x02, 0x2e, 0xe5, 0x01, -0x15, 0xe5, 0x01, 0x03, 0xe5, 0xe5, 0x05, 0x02, -0xe5, 0xe5, 0x04, 0xe5, 0x07, 0x0a, 0xe7, 0xe5, -0x04, 0xe5, 0x06, 0xe6, 0x07, 0xe5, 0x07, 0xe5, -0x06, 0x03, 0x04, 0x14, 0x03, 0x23, 0x01, 0x04, -0x0c, 0x01, 0xe6, 0x04, 0x01, 0x1b, 0xe5, 0x18, -0x06, 0x09, 0xe5, 0xe5, 0x0f, 0x02, 0x01, 0x06, -0x09, 0xe5, 0xe5, 0x05, 0xe5, 0xe5, 0x18, 0x02, -0x19, 0x04, 0xe6, 0x05, 0x01, 0xe5, 0x09, 0x0a, -0x09, 0x09, 0x07, 0x01, 0x1b, 0x01, 0x01, 0x19, -0x04, 0x08, 0xe5, 0x01, 0x04, 0x09, 0x01, 0x07, -0x0b, 0x01, 0x05, 0x21, 0x01, 0x01, 0xe5, 0x0f, -0x19, 0xe5, 0xe5, 0x11, 0x01, 0xe6, 0x04, 0x01, -0xe5, 0xe5, 0x03, 0xe5, 0xe5, 0xe5, 0x1d, 0x01, -0xe7, 0x05, 0x0a, 0x01, 0x02, 0x04, 0x01, 0x07, -0x01, 0xe5, 0x02, 0x01, 0xe5, 0xe6, 0xe5, 0x03, -0x01, 0x01, 0x02, 0x01, 0x02, 0x01, 0xe5, 0x01, -0x03, 0x01, 0x07, 0x01, 0x01, 0x05, 0x01, 0x07, -0x01, 0x0b, 0x01, 0xe5, 0x08, 0x20, 0x09, 0x02, -0xe6, 0xe6, 0x05, 0x03, 0x0e, 0x0a, 0xe5, 0x01, -0x16, 0xe7, 0x1d, 0x08, 0x07, 0x04, 0x01, 0x03, -0x02, 0x05, 0x02, 0x06, 0x05, 0x0b, 0x07, 0x07, -0x08, 0xe5, 0x01, 0xe5, 0x11, 0x16, 0x0f, 0xe5, -0x03, 0xe5, 0xe5, 0x01, 0x04, 0x03, 0x04, 0x05, -0x06, 0x19, 0xe6, 0xe7, 0x05, 0xe5, 0x05, 0x09, -0x03, 0x09, 0x04, 0x02, 0x01, 0x02, 0x01, 0x10, -0x02, 0x01, 0x04, 0x01, 0x03, 0x20, 0x02, 0xe6, -0x10, 0x18, 0xe5, 0x03, 0x04, 0x01, 0x05, 0x01, -0x09, 0x04, 0x14, 0x16, 0xe5, 0x01, 0xe5, 0x12, -0x0b, 0x04, 0x07, 0x0e, 0x02, 0xe5, 0x02, 0x06, -0x05, 0x26, 0xe6, 0xe7, 0x12, 0xe5, 0x04, 0x0f, -0x03, 0x0b, 0x04, 0x0e, 0x0f, 0x03, 0x18, 0x01, -0xe5, 0x1a, 0xe5, 0x10, 0x05, 0x0a, 0x11, 0x14, -0x14, 0xe5, 0xe5, 0x16, 0xe6, 0x02, 0x02, 0xe7, -0x02, 0x03, 0xe6, 0x06, 0xe6, 0xe6, 0x03, 0xe5, -0x08, 0xe7, 0xe5, 0x29, 0x03, 0x02, 0x10, 0x06, -0x03, 0x05, 0x03, 0x01, 0x02, 0x0a, 0x03, 0x02, -0x07, 0xe5, 0x04, 0x0a, 0x20, 0x01, 0x01, 0xe5, -0x14, 0x17, 0x02, 0xe5, 0x19, 0x01, 0xe5, 0xe5, -0xe5, 0x02, 0x03, 0x06, 0x0d, 0x07, 0xe6, 0x01, -0x2e, 0x03, 0x02, 0x01, 0x03, 0x02, 0x01, 0x0b, -0xe5, 0x09, 0x01, 0x1f, 0x01, 0xe6, 0x12, 0x0c, -0x0e, 0x17, 0x05, 0x0d, 0x09, 0x14, 0x02, 0xe5, -0xe5, 0x01, 0x0b, 0xe5, 0xe6, 0x05, 0x02, 0xe5, -0x10, 0xe5, 0x01, 0x0e, 0xe8, 0x05, 0xe5, 0xe6, -0xe5, 0x01, 0xe5, 0x1d, 0x02, 0x01, 0xe5, 0x01, -0x0e, 0x01, 0xe5, 0x04, 0x03, 0x01, 0x0c, 0x03, -0xe5, 0x01, 0x0b, 0xe5, 0x01, 0x01, 0xe5, 0x05, -0xe5, 0x03, 0x03, 0x1b, 0x01, 0x01, 0xe5, 0xe5, -0xe5, 0x03, 0x15, 0x12, 0x07, 0x0b, 0x01, 0x04, -0xe5, 0x03, 0x06, 0x1a, 0x01, 0x02, 0x01, 0xe5, -0xe6, 0xe7, 0xe5, 0x16, 0x10, 0x01, 0x07, 0x05, -0xe5, 0x03, 0x01, 0x04, 0xe5, 0xe5, 0x01, 0x06, -0x1a, 0xe5, 0x04, 0x02, 0x01, 0x01, 0xe5, 0xe5, -0x18, 0x09, 0x04, 0x04, 0x04, 0x04, 0x08, 0x0c, -0x04, 0x23, 0xe6, 0xe7, 0xe5, 0x01, 0x25, 0x04, -0x04, 0x03, 0x07, 0x03, 0x01, 0x02, 0x04, 0x04, -0xe5, 0x02, 0x1d, 0xe5, 0xe6, 0x01, 0x02, 0x18, -0x02, 0x06, 0x02, 0x02, 0x01, 0x04, 0x02, 0x06, -0x01, 0x02, 0x01, 0x03, 0xe5, 0x08, 0xe7, 0x20, -0x06, 0xe5, 0x1a, 0x01, 0xe5, 0x05, 0xe7, 0xe5, -0x03, 0x01, 0xe7, 0x02, 0xe7, 0x03, 0x01, 0x04, -0x02, 0x03, 0xe5, 0xe5, 0x01, 0x25, 0x01, 0xe5, -0x04, 0x14, 0x01, 0xe5, 0xe6, 0x02, 0x01, 0x09, -0x07, 0x01, 0x0c, 0x01, 0xe5, 0x02, 0x01, 0x02, -0x25, 0x01, 0x02, 0x01, 0x18, 0xe5, 0x07, 0xe5, -0x11, 0xe5, 0x13, 0xe5, 0x01, 0x27, 0x02, 0xe6, -0x0d, 0x09, 0xe6, 0x06, 0xe6, 0x06, 0x09, 0xe5, -0x04, 0x04, 0x09, 0xe5, 0x01, 0x05, 0x02, 0x01, -0x01, 0x02, 0x09, 0x0d, 0xe9, 0x01, 0x19, 0x09, -0x09, 0x09, 0xe5, 0x01, 0x11, 0x2a, 0x02, 0x39, -0x01, 0x13, 0x2b, 0x02, 0x17, 0x01, 0xe7, 0x06, -0x01, 0x09, 0x06, 0xe7, 0x02, 0x02, 0x01, 0x04, -0x05, 0xe6, 0xe5, 0xe6, 0xe5, 0x08, 0x18, 0xe8, -0x16, 0x01, 0xe6, 0x08, 0x09, 0x04, 0x02, 0xe6, -0x01, 0x04, 0x01, 0xe5, 0x04, 0x02, 0xe6, 0x04, -0x01, 0xe5, 0x05, 0x02, 0x17, 0xe8, 0x15, 0x04, -0x0c, 0x0e, 0x09, 0x01, 0x04, 0x04, 0x01, 0x05, -0x01, 0x06, 0x02, 0x18, 0xe6, 0xe5, 0x14, 0xe5, -0x05, 0xe6, 0x06, 0xe6, 0x08, 0xe5, 0x01, 0xe5, -0x02, 0xe5, 0x02, 0x01, 0x04, 0xe5, 0x02, 0x04, -0xe5, 0xe5, 0xe5, 0x03, 0xe5, 0xe5, 0x06, 0xe5, -0x07, 0xe5, 0x0a, 0x17, 0x01, 0xe5, 0x03, 0x09, -0x01, 0x01, 0x09, 0xe5, 0x07, 0x01, 0xe6, 0x06, -0xe5, 0x11, 0x18, 0xe5, 0x01, 0x17, 0x01, 0x03, -0x02, 0x06, 0x02, 0xe5, 0xe5, 0x08, 0x06, 0x02, -0x01, 0x06, 0x02, 0xe5, 0x04, 0x09, 0xe5, 0x19, -0xe8, 0x19, 0x03, 0xe5, 0x07, 0xe5, 0xe5, 0xe5, -0x08, 0xe5, 0x02, 0x03, 0x02, 0x04, 0x04, 0x04, -0x09, 0x04, 0x17, 0xe9, 0x1b, 0xe5, 0x07, 0xe5, -0x02, 0x01, 0x02, 0x06, 0x02, 0x06, 0x02, 0x03, -0x04, 0x02, 0x07, 0x03, 0x02, 0x1a, 0xe9, 0x09, -0x09, 0x09, 0x08, 0x05, 0xe5, 0x07, 0x0c, 0x05, -0x02, 0x06, 0x24, 0x03, 0x0b, 0x05, 0x01, 0x06, -0xe5, 0xe5, 0x06, 0xe6, 0xe5, 0x04, 0x01, 0xe5, -0x05, 0x01, 0x04, 0x04, 0xe7, 0x01, 0x03, 0x01, -0xe6, 0x04, 0x01, 0x07, 0x01, 0xe5, 0xe5, 0x03, -0x01, 0x0a, 0xe8, 0x0e, 0xe5, 0x09, 0x07, 0xe5, -0x05, 0x08, 0xe5, 0xe5, 0x02, 0x08, 0xe6, 0xe5, -0xe6, 0xe6, 0x01, 0x04, 0xe5, 0x0c, 0x0a, 0x06, -0x02, 0x01, 0xe7, 0x13, 0x07, 0xe5, 0x01, 0x01, -0x06, 0x0c, 0xe5, 0x03, 0x03, 0x03, 0x05, 0x12, -0x1a, 0x01, 0x02, 0x0d, 0x01, 0x03, 0x09, 0x02, -0x04, 0x01, 0xe5, 0xe5, 0x08, 0x09, 0xe5, 0x05, -0x03, 0x01, 0x07, 0x01, 0x0d, 0x0f, 0xe5, 0x03, -0x03, 0x03, 0xe5, 0x18, 0x0e, 0x12, 0xe7, 0x06, -0x01, 0x09, 0x03, 0x19, 0x05, 0x02, 0xe5, 0x06, -0x09, 0x09, 0xe5, 0x07, 0x02, 0x01, 0x05, 0x01, -0x0b, 0x01, 0x07, 0x03, 0x01, 0x03, 0x01, 0x0f, -0x10, 0x02, 0xe5, 0xe8, 0x08, 0x01, 0x06, 0x12, -0x06, 0x09, 0x03, 0xe5, 0x01, 0x03, 0x03, 0x03, -0xe6, 0x08, 0x06, 0x10, 0x01, 0x07, 0xe5, 0xe8, -0xe5, 0x0c, 0x0f, 0x0b, 0x02, 0xe5, 0x04, 0x04, -0x03, 0xe5, 0x02, 0x03, 0x02, 0x02, 0x01, 0x04, -0x06, 0x0b, 0x10, 0x01, 0xe5, 0xe5, 0x11, 0x01, -0x06, 0x14, 0x08, 0x02, 0x01, 0xe5, 0x03, 0xe5, -0xe5, 0x01, 0x02, 0x04, 0x02, 0x02, 0x01, 0x1f, -0x03, 0xe5, 0x0a, 0x09, 0x09, 0xe7, 0x02, 0x0d, -0xe6, 0x06, 0xe6, 0x03, 0x05, 0x04, 0x27, 0xe7, -0xe5, 0xe5, 0x06, 0x1a, 0x03, 0x0e, 0x07, 0x01, -0x0a, 0x23, 0x0b, 0xe7, 0xe6, 0x11, 0x02, 0x0a, -0xe5, 0xe5, 0x01, 0x02, 0x01, 0x07, 0x03, 0xe5, -0x05, 0x0d, 0x02, 0x02, 0x05, 0x1b, 0x02, 0x01, -0x03, 0x0f, 0x09, 0xe5, 0x06, 0x05, 0xe5, 0xe7, -0x01, 0x01, 0xe6, 0xe5, 0x04, 0xe7, 0x05, 0x02, -0xe5, 0x06, 0xe5, 0x04, 0x1d, 0x02, 0x17, 0x0d, -0x06, 0x02, 0x06, 0x16, 0x09, 0x24, 0x01, 0x01, -0x11, 0xe5, 0x08, 0x01, 0x0d, 0xe5, 0x04, 0x02, -0xe5, 0x0b, 0x08, 0x05, 0x02, 0xe6, 0x06, 0xe5, -0x13, 0x01, 0xe6, 0xe5, 0x01, 0x01, 0x0e, 0xe5, -0x08, 0xe5, 0xe6, 0x03, 0xe5, 0x0f, 0x15, 0x06, -0xe6, 0x09, 0x11, 0x01, 0x01, 0x02, 0xe6, 0x03, -0x15, 0x08, 0xe5, 0x09, 0x05, 0x06, 0x01, 0x04, -0x11, 0x01, 0x02, 0x15, 0x01, 0x02, 0x01, 0xe5, -0xe6, 0x01, 0x02, 0x17, 0x06, 0x03, 0x01, 0xe5, -0x12, 0x1a, 0x18, 0xe5, 0x04, 0x03, 0xe5, 0xe6, -0xe5, 0x18, 0x06, 0x02, 0x03, 0xe5, 0x08, 0x01, -0x05, 0x03, 0x04, 0x01, 0x01, 0x06, 0x02, 0xe5, -0xe6, 0x02, 0x01, 0x1a, 0xe5, 0xe5, 0xe5, 0x01, -0x1e, 0x03, 0x02, 0xe6, 0x01, 0x01, 0x01, 0x02, -0xe5, 0xe5, 0xe5, 0x06, 0x04, 0x04, 0x08, 0xe5, -0xe6, 0x01, 0x02, 0x15, 0x02, 0xe5, 0x03, 0xe5, -0x01, 0x18, 0x07, 0x04, 0x01, 0x0a, 0x01, 0x09, -0x01, 0x02, 0x01, 0x01, 0x08, 0x01, 0x01, 0x0c, -0x12, 0x02, 0xe8, 0x1b, 0xe6, 0x01, 0x03, 0xe5, -0xe5, 0x0b, 0x01, 0x09, 0x04, 0x01, 0x01, 0xe5, -0x08, 0x01, 0xe5, 0x22, 0x01, 0xe5, 0x07, 0x10, -0x01, 0xe5, 0x01, 0x03, 0x01, 0x02, 0x07, 0x02, -0x06, 0xe5, 0x08, 0xe5, 0x01, 0x06, 0xe5, 0x07, -0x09, 0x02, 0x10, 0x04, 0x0a, 0x01, 0x0d, 0xe5, -0x01, 0x05, 0xe5, 0x15, 0x0b, 0xe5, 0x04, 0x02, -0xe5, 0x07, 0xe6, 0x1a, 0x01, 0xe8, 0x06, 0x05, -0x09, 0xe6, 0xe5, 0x04, 0xe5, 0x02, 0x01, 0x02, -0x02, 0x06, 0x02, 0xe5, 0x01, 0x04, 0x09, 0x09, -0xe5, 0x02, 0x01, 0x02, 0x09, 0x0d, 0x01, 0x02, -0x02, 0x19, 0x03, 0x04, 0xe5, 0x02, 0x09, 0x08, -0xe5, 0x06, 0x09, 0x03, 0x09, 0x1f, 0x1f, 0x05, -0x03, 0x09, 0x09, 0x13, 0x09, 0x1e, 0x01, 0x01, -0x17, 0x01, 0xe5, 0xe5, 0x05, 0xe7, 0x02, 0x02, -0x07, 0x01, 0x04, 0x09, 0x01, 0x01, 0xe5, 0x03, -0x04, 0x02, 0x08, 0x07, 0x01, 0x0e, 0xe5, 0xe6, -0x15, 0xe5, 0xe7, 0x01, 0x02, 0x02, 0xe5, 0x01, -0x02, 0x01, 0xe5, 0x05, 0x01, 0xe5, 0x09, 0x01, -0x05, 0x02, 0xe5, 0xe5, 0x01, 0xe5, 0xe6, 0x05, -0x02, 0x06, 0x01, 0xe5, 0x0c, 0x01, 0x01, 0x08, -0x0b, 0x02, 0x0b, 0xe5, 0x05, 0x01, 0x09, 0x04, -0x06, 0x07, 0x09, 0x09, 0x09, 0x01, 0x10, 0x01, -0x15, 0xe6, 0x04, 0xe8, 0x04, 0xe8, 0xe5, 0x04, -0xe6, 0xe5, 0x03, 0xe5, 0x0a, 0x01, 0x07, 0x01, -0x01, 0x05, 0x03, 0x05, 0xe6, 0xe5, 0x04, 0xe5, -0x06, 0xe5, 0x01, 0x1a, 0x08, 0x09, 0xe5, 0x05, -0x01, 0xe5, 0x09, 0x07, 0x01, 0x07, 0x0b, 0x1b, -0xe5, 0x19, 0x02, 0x02, 0xe5, 0x05, 0x01, 0xe5, -0xe5, 0x06, 0x01, 0xe5, 0x02, 0x01, 0x0b, 0xe5, -0xe5, 0x05, 0xe5, 0xe5, 0x05, 0xe5, 0x19, 0x01, -0x01, 0xe5, 0x15, 0x06, 0xe5, 0x02, 0x03, 0x01, -0x01, 0x01, 0xe5, 0x07, 0x08, 0x02, 0x07, 0x09, -0x09, 0x1b, 0xe7, 0x16, 0x04, 0xe5, 0xe7, 0x03, -0x01, 0xe7, 0xe6, 0x05, 0x01, 0xe5, 0x02, 0x09, -0x01, 0x02, 0x04, 0x04, 0x0b, 0x1a, 0x01, 0xe5, -0x34, 0x01, 0x03, 0x04, 0x01, 0xe6, 0x01, 0xe5, -0x03, 0xe5, 0x02, 0x01, 0x23, 0x01, 0x01, 0xe5, -0x10, 0x01, 0x07, 0x01, 0xe5, 0x05, 0x01, 0x06, -0xe5, 0xe6, 0x05, 0x01, 0x04, 0xe5, 0x02, 0x01, -0x07, 0x01, 0x02, 0xe5, 0x02, 0x01, 0xe5, 0xe5, -0x03, 0x01, 0xe6, 0x04, 0x01, 0x0a, 0x03, 0x16, -0x02, 0xe5, 0x07, 0x06, 0x02, 0xe5, 0x04, 0x02, -0xe5, 0x02, 0x08, 0x01, 0x03, 0x01, 0xe5, 0x08, -0x02, 0x05, 0xe5, 0x01, 0x0a, 0x09, 0x01, 0x01, -0xe5, 0x15, 0x01, 0x05, 0x0c, 0x09, 0xe5, 0xe5, -0x01, 0x03, 0x06, 0x02, 0xe5, 0xe5, 0x02, 0xe5, -0x01, 0x03, 0x01, 0x03, 0x08, 0x09, 0x06, 0xe5, -0xe7, 0x04, 0x1d, 0x01, 0x07, 0x0a, 0xe5, 0x03, -0xe5, 0x05, 0x03, 0x05, 0xe5, 0x01, 0x0c, 0x18, -0xe9, 0x17, 0x05, 0x0a, 0x05, 0x09, 0x06, 0x06, -0x04, 0x07, 0xe6, 0xe5, 0x0e, 0x0b, 0x05, 0xe5, -0xe5, 0x15, 0xe5, 0x07, 0x0e, 0x01, 0x01, 0x0b, -0x04, 0xe5, 0x02, 0x01, 0x05, 0xe6, 0xe5, 0x15, -0x09, 0x02, 0x03, 0xe7, 0x17, 0x12, 0x0d, 0x03, -0x0a, 0x09, 0x01, 0xe5, 0x02, 0x01, 0x1b, 0x01, -0xe5, 0xe5, 0x11, 0x0d, 0x0a, 0xe6, 0x05, 0xe5, -0x02, 0x05, 0xe5, 0x09, 0x01, 0x03, 0x06, 0x04, -0x1b, 0x01, 0xe5, 0xe5, 0x1a, 0x0a, 0x0b, 0x01, -0xe5, 0x05, 0x02, 0xe5, 0x04, 0xe6, 0x08, 0x09, -0x14, 0x08, 0xe5, 0x01, 0x06, 0x11, 0x0c, 0x01, -0x11, 0x04, 0xe5, 0x09, 0x05, 0x08, 0x1f, 0xe5, -0xe7, 0x0a, 0x06, 0x03, 0x02, 0x06, 0x1e, 0x09, -0x07, 0x0c, 0x04, 0x09, 0x0d, 0x02, 0xe5, 0x01, -0x06, 0x09, 0x05, 0x03, 0x04, 0x06, 0x02, 0x10, -0x06, 0x08, 0x03, 0x02, 0x01, 0x01, 0x07, 0x12, -0x04, 0x04, 0x03, 0x18, 0x0d, 0x02, 0x0d, 0x04, -0x05, 0x02, 0x03, 0x03, 0x05, 0x03, 0x05, 0x11, -0x09, 0xe5, 0xe5, 0x1e, 0x05, 0x03, 0x01, 0x17, -0x06, 0x09, 0x05, 0x02, 0xe5, 0x12, 0x07, 0x01, -0x03, 0x06, 0x23, 0x06, 0x04, 0x0b, 0x10, 0x01, -0x08, 0x11, 0x02, 0x02, 0xe5, 0xe6, 0x07, 0x07, -0x14, 0x08, 0x06, 0x18, 0x09, 0x09, 0x09, 0x0e, -0x02, 0xe6, 0x0a, 0x09, 0x09, 0x02, 0xe5, 0x1d, -0xe5, 0x01, 0x01, 0x04, 0xe5, 0x24, 0xe6, 0xe9, -0x01, 0x01, 0x08, 0x09, 0xe6, 0x06, 0xe6, 0xe5, -0x1e, 0x02, 0x01, 0xe5, 0x2a, 0x01, 0x01, 0xe5, -0xe5, 0x03, 0x08, 0x06, 0x01, 0x0a, 0x2c, 0xe5, -0x26, 0x02, 0xe5, 0xe6, 0x01, 0x0a, 0x06, 0xe5, -0x02, 0x04, 0x02, 0x01, 0x27, 0x06, 0xe5, 0x02, -0x1c, 0x02, 0x01, 0xe6, 0xe6, 0x0c, 0x09, 0x01, -0x02, 0x02, 0x01, 0x01, 0x03, 0x02, 0xe5, 0xe5, -0x06, 0x01, 0x15, 0x01, 0xe5, 0xe5, 0xe5, 0x05, -0x02, 0x19, 0xe6, 0xe7, 0x01, 0x0a, 0x03, 0x05, -0x01, 0x02, 0x01, 0x01, 0xe5, 0xe5, 0xe5, 0x03, -0xe5, 0xe5, 0xe5, 0x04, 0x01, 0x01, 0x16, 0x08, -0x02, 0x01, 0x15, 0x02, 0x01, 0xe5, 0x02, 0xe5, -0x03, 0xe5, 0x05, 0x0e, 0x04, 0x01, 0x03, 0xe6, -0xe5, 0xe5, 0x06, 0x01, 0x15, 0x02, 0x0b, 0x1a, -0x02, 0xe5, 0xe6, 0x05, 0x06, 0x0b, 0x07, 0x05, -0xe5, 0x01, 0x01, 0x07, 0x01, 0x18, 0xe6, 0x07, -0xe6, 0x18, 0x01, 0xe6, 0xe6, 0x12, 0x08, 0x0a, -0x02, 0x25, 0x14, 0xe5, 0x0c, 0x02, 0x03, 0x02, -0x0a, 0x09, 0x01, 0x11, 0xe5, 0x31, 0x09, 0xe5, -0x12, 0x02, 0xe5, 0x09, 0x03, 0x05, 0xe5, 0x01, -0x06, 0x02, 0x02, 0x06, 0x09, 0x0b, 0x09, 0x04, -0x01, 0x02, 0x03, 0x05, 0x09, 0x0d, 0xe9, 0x01, -0x12, 0x09, 0xe5, 0x2e, 0x03, 0x26, 0xe5, 0xe5, -0x1e, 0x31, 0x2b, 0xe5, 0xe5, 0x0a, 0x01, 0x09, -0x04, 0x02, 0x06, 0x1f, 0x07, 0x01, 0x0e, 0x1a, -0x01, 0x0d, 0x01, 0xe5, 0x04, 0xe5, 0x01, 0xe5, -0x07, 0x05, 0x03, 0x19, 0x06, 0x07, 0xe5, 0x04, -0x02, 0xe5, 0x17, 0x02, 0x0c, 0x0c, 0x06, 0x3e, -0x1a, 0x01, 0x01, 0x13, 0xe5, 0xe6, 0x04, 0xe6, -0x06, 0xe6, 0x06, 0xe6, 0x08, 0xe5, 0x09, 0xe5, -0x07, 0xe5, 0x07, 0xe6, 0x06, 0xe5, 0x07, 0xe5, -0x06, 0x01, 0xe6, 0x13, 0x05, 0x04, 0x04, 0xe5, -0x02, 0x01, 0x02, 0x03, 0xe5, 0x18, 0x0a, 0xe5, -0x04, 0x1a, 0xe5, 0xe6, 0x15, 0x07, 0x01, 0x09, -0xe5, 0x07, 0x18, 0x11, 0x1b, 0xe5, 0xe5, 0x12, -0x01, 0xe5, 0x02, 0x02, 0x01, 0x07, 0xe6, 0xe5, -0x01, 0x02, 0x01, 0x0c, 0x0c, 0x13, 0x18, 0x01, -0xe6, 0x12, 0x06, 0x01, 0xe6, 0x04, 0x03, 0x02, -0x02, 0x02, 0x1b, 0x02, 0x07, 0x08, 0x18, 0xe5, -0x01, 0x0d, 0xe5, 0xe5, 0x05, 0x01, 0xe5, 0x02, -0x02, 0x03, 0x0a, 0x02, 0x17, 0x02, 0x03, 0x05, -0x0e, 0x11, 0x02, 0x01, 0x0a, 0x06, 0x01, 0xe5, -0x01, 0x03, 0x01, 0x04, 0x02, 0x01, 0x07, 0x01, -0x01, 0x05, 0x01, 0x02, 0x01, 0x04, 0x01, 0x01, -0x05, 0x01, 0x07, 0x01, 0x02, 0x04, 0xe6, 0x06, -0x01, 0x0b, 0x02, 0x09, 0x04, 0x0a, 0x09, 0xe5, -0x01, 0x05, 0xe5, 0x13, 0xe5, 0x01, 0x03, 0xe5, -0x01, 0x05, 0x05, 0x1e, 0x01, 0x01, 0xe5, 0xe5, -0x01, 0x0b, 0x04, 0x05, 0x04, 0x01, 0x05, 0x03, -0x12, 0xe5, 0xe5, 0x0b, 0x01, 0x06, 0x01, 0x1d, -0x02, 0x01, 0x0b, 0x0d, 0x11, 0x0e, 0x04, 0x09, -0x30, 0x03, 0xe5, 0x03, 0x02, 0x04, 0x01, 0x02, -0x01, 0xe5, 0xe7, 0x04, 0x01, 0x01, 0x07, 0x01, -0x0a, 0x0b, 0x08, 0x09, 0xe5, 0x05, 0x01, 0xe5, -0x11, 0x05, 0x02, 0x02, 0x02, 0x09, 0x03, 0x04, -0x0a, 0x0a, 0x02, 0x01, 0x07, 0x03, 0x11, 0x01, -0x01, 0x05, 0x05, 0x0d, 0x06, 0x02, 0xe5, 0xe5, -0xe6, 0x0b, 0x08, 0x06, 0xe8, 0xe5, 0x03, 0xe5, -0xe5, 0xe5, 0x10, 0x04, 0x04, 0x01, 0x0a, 0xe5, -0x01, 0x04, 0xe6, 0x16, 0x02, 0x01, 0x05, 0x0a, -0x06, 0x02, 0x02, 0x04, 0x01, 0x15, 0x04, 0x05, -0x04, 0x0a, 0x01, 0x21, 0x03, 0xe5, 0x05, 0x12, -0x04, 0x07, 0x07, 0x10, 0x12, 0x27, 0xe8, 0x02, -0x08, 0x0f, 0x16, 0x08, 0x02, 0x0a, 0x05, 0x03, -0x07, 0x1c, 0xe6, 0xe6, 0xe5, 0x11, 0x1a, 0x01, -0x02, 0x08, 0x01, 0x06, 0x1c, 0x16, 0xe5, 0xe6, -0x08, 0xe5, 0x07, 0x0c, 0x02, 0xe5, 0x07, 0x09, -0x10, 0x08, 0x05, 0xe5, 0x03, 0x01, 0x01, 0x17, -0x01, 0xe7, 0x18, 0x08, 0xe5, 0x02, 0x05, 0x08, -0xe5, 0x07, 0x16, 0x05, 0xe5, 0x01, 0x01, 0x18, -0xe6, 0x18, 0x08, 0x08, 0xe5, 0x09, 0x17, 0x01, -0x03, 0xe5, 0x08, 0x16, 0x03, 0x02, 0x03, 0x09, -0x09, 0x13, 0x04, 0x20, 0xe5, 0x01, 0x02, 0x06, -0x17, 0xe5, 0x01, 0x01, 0xe6, 0x0b, 0x0b, 0x02, -0x0b, 0x01, 0xe7, 0x22, 0xe5, 0x02, 0x09, 0x14, -0x01, 0x01, 0x03, 0xe5, 0x0c, 0x05, 0xe5, 0x0e, -0x02, 0xe5, 0x04, 0x22, 0xe5, 0x03, 0x07, 0x0f, -0xe5, 0x03, 0x01, 0x04, 0x01, 0xe5, 0xe5, 0x01, -0x07, 0x19, 0xe5, 0x01, 0x01, 0xe5, 0x22, 0x04, -0x04, 0xe5, 0xe5, 0x0e, 0xe5, 0x05, 0x02, 0x01, -0x01, 0xe5, 0x0b, 0x12, 0xe5, 0x02, 0x05, 0x01, -0x02, 0xe5, 0x01, 0x1e, 0x01, 0x02, 0x1f, 0xeb, -0xe5, 0x09, 0x03, 0x09, 0x01, 0x01, 0xe6, 0x08, -0x01, 0x04, 0x01, 0x20, 0x02, 0x06, 0x01, 0x01, -0x01, 0x02, 0x0e, 0x05, 0xe6, 0x0b, 0x13, 0x09, -0x01, 0x27, 0x01, 0x04, 0x04, 0x15, 0x04, 0xe7, -0x0b, 0x13, 0x06, 0x01, 0xe5, 0xe5, 0xe5, 0x2b, -0xe5, 0x02, 0x1a, 0xe6, 0x1c, 0x02, 0x05, 0xe5, -0x07, 0xe5, 0x01, 0x06, 0x1c, 0x02, 0x01, 0xe5, -0x05, 0x02, 0x0b, 0x04, 0xe5, 0x02, 0x0a, 0x13, -0x06, 0x02, 0x01, 0x05, 0x01, 0x0b, 0x1d, 0x1d, -0x01, 0xe7, 0x09, 0x03, 0x02, 0x06, 0x02, 0x02, -0x03, 0x03, 0x05, 0xe5, 0xe5, 0xe7, 0x01, 0x0b, -0x09, 0x04, 0x01, 0x02, 0x02, 0x01, 0xe6, 0x01, -0x02, 0x06, 0x0d, 0x01, 0xe7, 0x15, 0x09, 0x05, -0x03, 0x09, 0x1f, 0x09, 0x1b, 0xe8, 0x14, 0x09, -0x08, 0x08, 0x20, 0x08, 0x1e, 0xe5, 0x01, 0x16, -0xe5, 0xe5, 0x06, 0x01, 0x06, 0xe5, 0x07, 0x20, -0x01, 0xe6, 0x04, 0x01, 0x19, 0x01, 0xe5, 0x01, -0x14, 0x01, 0xe5, 0x05, 0x01, 0x01, 0x01, 0x06, -0xe5, 0x07, 0x1c, 0x08, 0xe5, 0x01, 0x17, 0xe6, -0xe6, 0x15, 0x01, 0x04, 0x40, 0x01, 0x18, 0xe8, -0x14, 0xe5, 0x01, 0x05, 0xe5, 0x07, 0xe5, 0x07, -0xe5, 0x07, 0xe5, 0x09, 0xe5, 0x07, 0xe6, 0x01, -0x04, 0xe6, 0xe5, 0x04, 0xe5, 0x07, 0xe5, 0x06, -0x02, 0xe5, 0x16, 0x01, 0x07, 0x01, 0x57, 0xe7, -0x03, 0x12, 0x01, 0x07, 0x01, 0x13, 0x1f, 0x07, -0x1c, 0xe6, 0x16, 0x01, 0x26, 0x14, 0x01, 0x07, -0x1c, 0x01, 0x04, 0x12, 0x01, 0x07, 0x04, 0x09, -0x26, 0x07, 0x15, 0x01, 0x04, 0xe6, 0x0c, 0x01, -0xe5, 0x09, 0x05, 0xe5, 0xe5, 0x13, 0x1b, 0x06, -0x02, 0x10, 0x04, 0x03, 0xe6, 0xe6, 0x02, 0xe5, -0x06, 0x01, 0x02, 0x01, 0xe5, 0x05, 0x01, 0x04, -0x02, 0xe6, 0x06, 0x01, 0x01, 0x05, 0x01, 0x04, -0x04, 0x01, 0x02, 0x04, 0x01, 0x04, 0x02, 0x01, -0x01, 0x02, 0x02, 0x01, 0x07, 0x01, 0x01, 0x04, -0x05, 0xe6, 0x02, 0x12, 0x0e, 0x07, 0x03, 0x0c, -0x08, 0x0c, 0x06, 0x1e, 0x01, 0xe7, 0x1d, 0x08, -0x01, 0x0e, 0x24, 0x13, 0x06, 0xe5, 0xe5, 0xe5, -0x14, 0x09, 0xe5, 0x07, 0xe5, 0x01, 0x01, 0x0a, -0x02, 0x01, 0x05, 0x34, 0xe9, 0xe5, 0x01, 0x02, -0x0e, 0x01, 0x07, 0x01, 0xe5, 0x05, 0xe7, 0x01, -0xe5, 0x01, 0x0f, 0x0f, 0x09, 0x15, 0x07, 0xe5, -0x16, 0x01, 0x0a, 0x03, 0x03, 0x06, 0x03, 0x02, -0x04, 0x13, 0x03, 0x09, 0x03, 0x10, 0x02, 0x01, -0xe5, 0xe6, 0x18, 0x06, 0x0b, 0xe6, 0x07, 0x06, -0x06, 0x07, 0x0e, 0x1b, 0xe9, 0x0f, 0x05, 0x04, -0x08, 0x06, 0xe5, 0x04, 0x05, 0x02, 0x03, 0x14, -0x04, 0x03, 0x1b, 0x01, 0x02, 0x11, 0x0a, 0xe5, -0x07, 0x06, 0x11, 0xe5, 0x39, 0x02, 0x0d, 0xe5, -0x0b, 0x03, 0x0c, 0x10, 0x01, 0x39, 0x01, 0xe5, -0xe5, 0x0c, 0x02, 0x05, 0x04, 0x10, 0x05, 0xe5, -0x0a, 0x3a, 0xe5, 0xe6, 0x01, 0x16, 0x0d, 0x02, -0x06, 0x05, 0xe5, 0x06, 0xe5, 0xe5, 0x0e, 0x25, -0xe5, 0x01, 0xe5, 0x1b, 0x09, 0xe5, 0x04, 0x08, -0xe5, 0x07, 0x02, 0x19, 0x11, 0x0b, 0x02, 0x17, -0x15, 0x06, 0x02, 0x0a, 0x3a, 0xe7, 0x11, 0xe5, -0x04, 0x0f, 0x4b, 0xe5, 0x02, 0xe6, 0x01, 0x01, -0x0e, 0xe5, 0x05, 0x0f, 0xe6, 0x11, 0x34, 0x01, -0x01, 0x03, 0xe5, 0x03, 0x05, 0x01, 0xe5, 0xe5, -0x03, 0xe5, 0xe5, 0xe6, 0x0f, 0x01, 0x04, 0x01, -0xe5, 0x01, 0x03, 0xe5, 0x02, 0x04, 0x28, 0xe5, -0x03, 0x01, 0x03, 0x02, 0x02, 0x07, 0x02, 0x01, -0x04, 0xe5, 0xe5, 0xe6, 0x0c, 0xe5, 0xe5, 0xe5, -0x03, 0xe5, 0x02, 0x04, 0x32, 0xe5, 0x05, 0x02, -0x01, 0x01, 0x0b, 0x01, 0x01, 0x02, 0x04, 0x21, -0xe5, 0x01, 0xe5, 0xe5, 0x05, 0x02, 0x2d, 0xe7, -0xe6, 0x01, 0x0a, 0x01, 0x02, 0x04, 0x13, 0x01, -0x01, 0x01, 0x02, 0x05, 0x02, 0xe5, 0x05, 0x2e, -0x02, 0x03, 0x01, 0xe6, 0x17, 0x11, 0x01, 0x07, -0x07, 0x03, 0x35, 0x02, 0xe8, 0x11, 0x06, 0x11, -0x01, 0x09, 0x03, 0xe5, 0x3d, 0x01, 0xe5, 0x11, -0x09, 0x14, 0x02, 0x05, 0x3e, 0xe7, 0xe5, 0x1a, -0xe5, 0x1e, 0x3d, 0xe5, 0x01, 0xe5, 0x0a, 0x02, -0x09, 0x09, 0x09, 0x06, 0x02, 0x03, 0x02, 0x04, -0x09, 0x09, 0x09, 0x09, 0x0d, 0xe9, 0x01, 0x08, -0xe5, 0x04, 0x09, 0x14, 0x02, 0x05, 0x02, 0xe5, -0x3a, 0xe5, 0xe6, 0x0a, 0x26, 0x08, 0x40, 0xe6, -0x0c, 0x04, 0x04, 0x01, 0x02, 0x15, 0x0b, 0x04, -0x36, 0xe8, 0x0e, 0x01, 0x02, 0x02, 0x01, 0xe6, -0xe5, 0x0f, 0x0a, 0x09, 0xe5, 0x35, 0xe8, 0x08, -0x02, 0x09, 0x01, 0x10, 0x07, 0x08, 0x07, 0x2e, -0x08, 0xe7, 0x0e, 0x05, 0xe6, 0xe5, 0x04, 0xe5, -0x07, 0xe5, 0x07, 0xe5, 0x07, 0xe5, 0x09, 0xe5, -0x07, 0xe5, 0x07, 0xe5, 0x07, 0xe5, 0x07, 0xe5, -0x09, 0xe5, 0x0c, 0x09, 0x01, 0x14, 0x14, 0x36, -0x02, 0xe5, 0x0e, 0x07, 0x16, 0x4d, 0x01, 0xe5, -0x0b, 0x09, 0x01, 0x11, 0x0b, 0x01, 0x06, 0x02, -0x36, 0xe5, 0xe6, 0x02, 0x0b, 0x02, 0x04, 0x04, -0x0e, 0x02, 0x11, 0x39, 0xe5, 0x01, 0x2b, 0x15, -0x01, 0xe5, 0x20, 0x12, 0xe5, 0xe7, 0x10, 0x01, -0x02, 0x03, 0xe5, 0xe5, 0x06, 0x01, 0x02, 0x04, -0x01, 0x07, 0x01, 0x05, 0x03, 0x01, 0x07, 0x01, -0x07, 0x01, 0x07, 0x01, 0x07, 0x01, 0x0b, 0xe5, -0xe5, 0x18, 0x12, 0x02, 0x09, 0x21, 0x01, 0x1c, -0xe6, 0xe6, 0x13, 0x1c, 0x0b, 0x01, 0x13, 0x24, -0xe5, 0x01, 0xe5, 0x18, 0x14, 0x10, 0x3b, 0x02, -0x17, 0x01, 0x0e, 0x02, 0x01, 0x07, 0xe5, 0x09, -0x01, 0x16, 0x1a, 0x05, 0x02, 0x17, 0x01, 0x13, -0x0d, 0x03, 0x04, 0x03, 0x10, 0x1c, 0x02, 0x02, -0xe6, 0x19, 0x09, 0x06, 0x05, 0x0f, 0x37, 0x01, -0xe7, 0x25, 0x04, 0x01, 0x11, 0x08, 0x10, 0x1f, -0x02, 0x01, 0x26, 0x08, 0x0f, 0x06, 0x33, 0x01, -0x01, 0x0a, 0x10, 0x0f, 0x13, 0x07, 0x31, 0x02, -0xe6, 0x11, 0x16, 0x01, 0x03, 0x0f, 0x3b, 0x02, -0x14, 0x01, 0x16, 0xe5, 0x0c, 0x28, 0x13, 0x04, -0xe5, 0x2b, 0x0a, 0x36, 0x0a, 0x01, 0x01, 0x2b, -0xe5, 0x0d, 0x3e, 0xe8, 0xe5, 0x75, 0xe5, 0x03, -0x02, 0x01, 0x28, 0x47, 0x01, 0x02, 0xe6, 0xe5, -0x03, 0x23, 0x01, 0x4a, 0x04, 0xe5, 0x01, 0x02, -0x74, 0x02, 0xe6, 0xe6, 0x04, 0x05, 0x21, 0x01, -0x01, 0x01, 0x45, 0x01, 0xe6, 0x01, 0x08, 0x25, -0x02, 0x3f, 0x02, 0x05, 0xe6, 0x72, 0x04, 0xe5, -0xe5, 0xe5, 0x01, 0x2c, 0x4a, 0x03, 0xe6, 0x2d, -0x43, 0x06, 0x01, 0xe5, 0x7a, 0xe8, 0x0d, 0x09, -0x09, 0x09, 0x09, 0x0b, 0x09, 0x09, 0x09, 0x09, -0x0d, 0x03, 0xe5, 0x01, 0x27, 0x4c, 0x06, 0x29, -0x52, 0x01, 0x2d, 0xe5, 0x48, 0x03, 0x01, 0x16, -0x03, 0x14, 0x4a, 0xe6, 0xe5, 0x2c, 0x03, 0x4a, -0xe6, 0x03, 0x10, 0xe5, 0x07, 0xe5, 0x07, 0xe5, -0x07, 0xe5, 0x07, 0xe5, 0x09, 0xe5, 0x07, 0xe5, -0x07, 0xe5, 0x07, 0xe5, 0x07, 0xe5, 0x06, 0x02, -0xe5, 0x16, 0x01, 0x13, 0x4c, 0x03, 0x17, 0x01, -0x63, 0xe6, 0x15, 0x01, 0x13, 0x12, 0x39, 0x03, -0x03, 0x13, 0x01, 0x16, 0x49, 0xe5, 0xe6, 0x2a, -0x01, 0xe5, 0x49, 0x02, 0xe6, 0x10, 0x01, 0x01, -0x05, 0x01, 0x02, 0x03, 0xe5, 0xe5, 0x02, 0x03, -0x01, 0x01, 0x05, 0x01, 0x01, 0x02, 0x03, 0xe5, -0xe5, 0x06, 0x01, 0x07, 0x01, 0x07, 0x01, 0x07, -0x01, 0x0a, 0xe5, 0x01, 0x5b, 0x22, 0xe5, 0x09, -0x34, 0x07, 0x09, 0x0b, 0x1a, 0x02, 0x01, 0x3f, -0x3a, 0xe6, 0xe5, 0x16, 0x10, 0x17, 0x07, 0x2b, -0x08, 0xe5, 0x19, 0x16, 0x09, 0x03, 0x3b, 0xe7, -0x23, 0x1a, 0x04, 0xe5, 0x33, 0x01, 0xe6, 0x1b, -0x22, 0x0a, 0x0d, 0x23, 0x01, 0x3f, 0x3c, 0xe6, -0x20, 0xe6, 0x15, 0x04, 0x2a, 0x09, 0x06, 0xe5, -0xe5, 0x23, 0x1a, 0xe5, 0x28, 0x0f, 0x02, 0xe5, -0x38, 0x41, 0xe5, 0xe6, 0xe5, 0x24, 0x04, 0x1a, -0x30, 0x01, 0xe5, 0xe5, 0x2c, 0x4c, 0xe5, 0x01, -0xe6, 0x75, 0xe8, 0xe5, 0x01, 0x01, 0x70, 0x01, -0x03, 0xe5, 0xe5, 0x03, 0x70, 0x04, 0xe5, 0x01, -0x02, 0x74, 0x02, 0x01, 0xe6, 0x01, 0x78, 0x02, -0x74, 0x02, 0x02, 0xe8, 0x13, 0x5f, 0x04, 0x03, -0xe5, 0x13, 0xe5, 0x63, 0x01, 0xe6, 0x08, 0x02, -0x08, 0x64, 0xe5, 0x01, 0x0a, 0xe5, 0x6e, 0xe5, -0xe6, 0x0d, 0x09, 0x09, 0x09, 0x09, 0x0b, 0x09, -0x09, 0x09, 0x09, 0x0d, 0xe9, 0x01, 0x74, 0x06, -0x7a, 0x03, 0x01, 0x2b, 0x4d, 0xe5, 0xe5, 0x23, -0x08, 0xe5, 0x47, 0x02, 0xe8, 0x2c, 0x4b, 0xe5, -0x01, 0xe5, 0x12, 0x01, 0x07, 0xe6, 0x07, 0xe5, -0x02, 0x03, 0x01, 0x09, 0xe5, 0x09, 0xe5, 0x07, -0xe5, 0x07, 0xe5, 0x07, 0xe5, 0x07, 0xe5, 0x06, -0x01, 0xe6, 0x0f, 0xe5, 0x02, 0x09, 0x01, 0x01, -0xe5, 0x03, 0x03, 0x03, 0x01, 0x38, 0x0b, 0x01, -0x01, 0x01, 0x13, 0x02, 0x09, 0xe5, 0xe6, 0x02, -0x01, 0x02, 0x06, 0x37, 0x0d, 0x01, 0x01, 0x15, -0x07, 0xe6, 0xe5, 0xe5, 0x04, 0x03, 0x05, 0x47, -0xe5, 0xe5, 0x0f, 0x02, 0xe5, 0x07, 0xe5, 0x01, -0x01, 0xe5, 0x01, 0xe5, 0x03, 0x03, 0xe5, 0x38, -0x0e, 0x01, 0xe5, 0x2e, 0x33, 0x15, 0xe5, 0xe5, -0xe5, 0x10, 0x01, 0x07, 0x01, 0x07, 0x01, 0xe5, -0xe5, 0x03, 0x01, 0xe5, 0xe5, 0x02, 0xe5, 0xe6, -0x07, 0x01, 0xe5, 0x05, 0x01, 0xe6, 0x04, 0xe7, -0x05, 0x01, 0x07, 0x01, 0x0b, 0xe7, 0x3d, 0x15, -0x21, 0x03, 0x03, 0xe5, 0x3e, 0x38, 0xe5, 0xe5, -0xe5, 0x12, 0x02, 0x09, 0x1e, 0x07, 0x32, 0x03, -0xe5, 0x19, 0x05, 0x01, 0x0a, 0x09, 0x06, 0x3a, -0xe5, 0x01, 0x23, 0x03, 0x17, 0x3a, 0x03, 0xe5, -0x1f, 0x1d, 0x16, 0xe5, 0x24, 0xe5, 0x1e, 0x09, -0x12, 0x02, 0x15, 0x01, 0x23, 0xe7, 0x3e, 0x23, -0x17, 0x01, 0xe5, 0x3e, 0x3c, 0xe6, 0x24, 0x19, -0x3d, 0xe6, 0x1b, 0xe5, 0x04, 0x02, 0xe5, 0x08, -0x38, 0x12, 0x33, 0x36, 0xe6, 0x0b, 0x01, 0xe5, -0xe5, 0x6a, 0x10, 0xe6, 0x02, 0x0b, 0xe5, 0xe5, -0x05, 0xe5, 0x07, 0xe5, 0x07, 0xe6, 0x06, 0xe5, -0x07, 0xe7, 0x07, 0xe5, 0x07, 0xe5, 0x07, 0xe5, -0x07, 0xe5, 0x0b, 0x03, 0xe5, 0x0f, 0x09, 0x09, -0x09, 0x09, 0x04, 0x04, 0x01, 0x09, 0x09, 0x09, -0x01, 0x07, 0x0d, 0xe5, 0xe6, 0x0e, 0x09, 0x03, -0x05, 0x09, 0x09, 0x04, 0x06, 0x04, 0x04, 0x04, -0x04, 0x04, 0x04, 0x09, 0x0e, 0x03, 0x26, 0x57, -0x0f, 0x09, 0x09, 0x09, 0x09, 0x0b, 0x01, 0x07, -0x09, 0x09, 0x02, 0x06, 0x0e, 0xe5, 0xe6, 0x0c, -0xe5, 0x07, 0xe5, 0x07, 0xe5, 0x07, 0xe5, 0x07, -0xe5, 0x09, 0xe5, 0x07, 0xe5, 0x07, 0xe5, 0x07, -0xe5, 0x07, 0xe5, 0x0e, 0x03, 0x03, 0x09, 0x09, -0x09, 0x09, 0x09, 0x0b, 0x09, 0x09, 0x09, 0x09, -0x12, 0xe6, 0x0d, 0xe5, 0xe5, 0x05, 0xe5, 0xe5, -0x05, 0xe5, 0xe5, 0x05, 0xe5, 0xe5, 0x05, 0xe5, -0xe5, 0x07, 0xe5, 0xe5, 0x05, 0xe5, 0xe5, 0x05, -0xe5, 0xe5, 0x05, 0xe5, 0xe5, 0x05, 0xe5, 0xe5, -0x0b, 0x03, 0x0e, 0x09, 0x09, 0x09, 0x09, 0x03, -0x07, 0x09, 0x09, 0x09, 0x09, 0x0f, 0x02, 0xe5, -0x79, 0xe5, 0x01, 0x0e, 0x09, 0x09, 0x09, 0x09, -0x08, 0x02, 0x09, 0x09, 0x09, 0x09, 0x11, 0xe6, -0x3e, 0x3b, 0x02, 0x10, 0x09, 0x09, 0x09, 0x09, -0x0b, 0x09, 0x09, 0x09, 0x09, 0x10, 0xe5, 0x7d, -0x3f, 0x3a, 0xe5, 0x01, 0x3f, 0x36, 0x04, 0x02, -0x7a, 0x01, 0x01, 0x13, 0x3d, 0x28, 0x01, 0x01, -0x3f, 0x33, 0x0a, 0x3f, 0x34, 0x08, 0xe5, 0x79, -0x01, 0x01, 0x14, 0x09, 0x09, 0x09, 0x09, 0x0b, -0x09, 0x09, 0x09, 0x09, 0x09, 0xe5, 0x01, 0x0f, -0x09, 0x09, 0x09, 0x09, 0x07, 0x03, 0x09, 0x09, -0x09, 0x08, 0xe5, 0x0d, 0x03, 0x3a, 0x04, 0x3a, -0x02, 0xe5, 0x0c, 0x09, 0x03, 0x05, 0x09, 0x09, -0x03, 0x07, 0x09, 0x09, 0x07, 0x01, 0x1b, 0x01, -0xe5, 0x0a, 0x02, 0x07, 0x05, 0x03, 0x01, 0x03, -0x03, 0x01, 0x03, 0x03, 0x09, 0x06, 0xe5, 0x02, -0x04, 0x04, 0x04, 0x02, 0x06, 0xe5, 0x02, 0x02, -0x06, 0x02, 0xe5, 0x02, 0x03, 0xff, 0xff, 0xff, -0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, -0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, -0xff, diff --git a/board/esd/cpci750/mv_eth.c b/board/esd/cpci750/mv_eth.c index 91b4063..cbdcfe3 100644 --- a/board/esd/cpci750/mv_eth.c +++ b/board/esd/cpci750/mv_eth.c @@ -5,7 +5,7 @@ * based on - Driver for MV64360X ethernet ports * Copyright (C) 2002 rabeeh@galileo.co.il * - * SPDX-License-Identifier: GPL-2.0+ + * SPDX-License-Identifier: GPL-2.0 */ /* @@ -1025,21 +1025,6 @@ bool db64360_eth_start (struct eth_device *dev) * based on Linux code * arch/powerpc/galileo/EVB64360/mv64360_eth.c - Driver for MV64360X ethernet ports * Copyright (C) 2002 rabeeh@galileo.co.il - - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * */ /******************************************************************************** diff --git a/board/esd/pci405/writeibm.S b/board/esd/pci405/writeibm.S index 5925bc6..38acca1 100644 --- a/board/esd/pci405/writeibm.S +++ b/board/esd/pci405/writeibm.S @@ -1,28 +1,6 @@ -/*------------------------------------------------------------------------------+ */ -/* */ -/* This source code is dual-licensed. You may use it under the terms */ -/* of the GNU General Public License version 2, or under the license */ -/* below. */ -/* */ -/* This source code has been made available to you by IBM on an AS-IS */ -/* basis. Anyone receiving this source is licensed under IBM */ -/* copyrights to use it in any way he or she deems fit, including */ -/* copying it, modifying it, compiling it, and redistributing it either */ -/* with or without modifications. No license under IBM patents or */ -/* patent applications is to be implied by the copyright license. */ -/* */ -/* Any user of this software should understand that IBM cannot provide */ -/* technical support for this software and will not be responsible for */ -/* any consequences resulting from the use of this software. */ -/* */ -/* Any person who transfers this source code or any derivative work */ -/* must include the IBM copyright notice, this paragraph, and the */ -/* preceding two paragraphs in the transferred software. */ -/* */ -/* COPYRIGHT I B M CORPORATION 1995 */ -/* LICENSED MATERIAL - PROGRAM PROPERTY OF I B M */ -/*------------------------------------------------------------------------------- */ - +/* + * SPDX-License-Identifier: GPL-2.0 ibm-pibs + */ /*----------------------------------------------------------------------------- */ /* Function: ext_bus_cntlr_init */ /* Description: Initializes the External Bus Controller for the external */ diff --git a/board/freescale/b4860qds/b4860qds.c b/board/freescale/b4860qds/b4860qds.c index 86e44ea..f74651c 100644 --- a/board/freescale/b4860qds/b4860qds.c +++ b/board/freescale/b4860qds/b4860qds.c @@ -21,12 +21,14 @@ #include "../common/qixis.h" #include "../common/vsc3316_3308.h" +#include "../common/idt8t49n222a_serdes_clk.h" #include "b4860qds.h" #include "b4860qds_qixis.h" #include "b4860qds_crossbar_con.h" #define CLK_MUX_SEL_MASK 0x4 #define ETH_PHY_CLK_OUT 0x4 +#define PLL_NUM 2 DECLARE_GLOBAL_DATA_PTR; @@ -35,8 +37,6 @@ int checkboard(void) char buf[64]; u8 sw; struct cpu_type *cpu = gd->arch.cpu; - ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; - unsigned int i; static const char *const freq[] = {"100", "125", "156.25", "161.13", "122.88", "122.88", "122.88"}; int clock; @@ -61,19 +61,6 @@ int checkboard(void) /* the timestamp string contains "\n" at the end */ printf(" on %s", qixis_read_time(buf)); - /* Display the RCW, so that no one gets confused as to what RCW - * we're actually using for this boot. - */ - puts("Reset Configuration Word (RCW):"); - for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) { - u32 rcw = in_be32(&gur->rcwsr[i]); - - if ((i % 4) == 0) - printf("\n %08x:", i * 4); - printf(" %08x", rcw); - } - puts("\n"); - /* * Display the actual SERDES reference clocks as configured by the * dip switches on the board. Note that the SWx registers could @@ -252,6 +239,106 @@ int configure_vsc3316_3308(void) return 0; } +int config_serdes1_refclks(void) +{ + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + serdes_corenet_t *srds_regs = + (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR; + u32 serdes1_prtcl, lane; + unsigned int flag_sgmii_prtcl = 0; + int ret, i; + + serdes1_prtcl = in_be32(&gur->rcwsr[4]) & + FSL_CORENET2_RCWSR4_SRDS1_PRTCL; + if (!serdes1_prtcl) { + printf("SERDES1 is not enabled\n"); + return -1; + } + serdes1_prtcl >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; + debug("Using SERDES1 Protocol: 0x%x:\n", serdes1_prtcl); + + /* Clear SRDS_RSTCTL_RST bit for both PLLs before changing refclks + */ + for (i = 0; i < PLL_NUM; i++) + clrbits_be32(&srds_regs->bank[i].rstctl, SRDS_RSTCTL_RST); + /* Reconfigure IDT idt8t49n222a device for CPRI to work + * For this SerDes1's Refclk1 and refclk2 need to be set + * to 122.88MHz + */ + switch (serdes1_prtcl) { + case 0x2A: + case 0x2C: + case 0x2D: + case 0x2E: + debug("Configuring idt8t49n222a for CPRI SerDes clks:" + " for srds_prctl:%x\n", serdes1_prtcl); + ret = select_i2c_ch_pca(I2C_CH_IDT); + if (!ret) { + ret = set_serdes_refclk(IDT_SERDES1_ADDRESS, 1, + SERDES_REFCLK_122_88, + SERDES_REFCLK_122_88, 0); + if (ret) { + printf("IDT8T49N222A configuration failed.\n"); + return ret; + } else + printf("IDT8T49N222A configured.\n"); + } else { + return ret; + } + select_i2c_ch_pca(I2C_CH_DEFAULT); + + /* Change SerDes1's Refclk1 to 125MHz for on board + * SGMIIs to work + */ + for (lane = 0; lane < SRDS_MAX_LANES; lane++) { + enum srds_prtcl lane_prtcl = serdes_get_prtcl + (0, serdes1_prtcl, lane); + switch (lane_prtcl) { + case SGMII_FM1_DTSEC1: + case SGMII_FM1_DTSEC2: + case SGMII_FM1_DTSEC3: + case SGMII_FM1_DTSEC4: + case SGMII_FM1_DTSEC5: + case SGMII_FM1_DTSEC6: + flag_sgmii_prtcl++; + break; + default: + break; + } + } + + if (flag_sgmii_prtcl) + QIXIS_WRITE(brdcfg[4], QIXIS_SRDS1CLK_125); + + /* Steps For SerDes PLLs reset and reconfiguration after + * changing SerDes's refclks + */ + for (i = 0; i < PLL_NUM; i++) { + debug("For PLL%d reset and reconfiguration after" + " changing refclks\n", i+1); + clrbits_be32(&srds_regs->bank[i].rstctl, + SRDS_RSTCTL_SDRST_B); + udelay(10); + clrbits_be32(&srds_regs->bank[i].rstctl, + (SRDS_RSTCTL_SDEN | SRDS_RSTCTL_PLLRST_B)); + udelay(10); + setbits_be32(&srds_regs->bank[i].rstctl, + SRDS_RSTCTL_RST); + setbits_be32(&srds_regs->bank[i].rstctl, + (SRDS_RSTCTL_SDEN | SRDS_RSTCTL_PLLRST_B + | SRDS_RSTCTL_SDRST_B)); + } + break; + default: + printf("WARNING:IDT8T49N222A configuration not" + " supported for:%x SerDes1 Protocol.\n", + serdes1_prtcl); + return -1; + } + + return 0; +} + int board_early_init_r(void) { const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; @@ -277,6 +364,16 @@ int board_early_init_r(void) #ifdef CONFIG_SYS_DPAA_QBMAN setup_portals(); #endif + /* SerDes1 refclks need to be set again, as default clks + * are not suitable for CPRI and onboard SGMIIs to work + * simultaneously. + * This function will set SerDes1's Refclk1 and refclk2 + * as per SerDes1 protocols + */ + if (config_serdes1_refclks()) + printf("SerDes1 Refclks couldn't set properly.\n"); + else + printf("SerDes1 Refclks have been set.\n"); /* Configure VSC3316 and VSC3308 crossbar switches */ if (configure_vsc3316_3308()) diff --git a/board/freescale/b4860qds/b4860qds_crossbar_con.h b/board/freescale/b4860qds/b4860qds_crossbar_con.h index 6e64745..db0cf28 100644 --- a/board/freescale/b4860qds/b4860qds_crossbar_con.h +++ b/board/freescale/b4860qds/b4860qds_crossbar_con.h @@ -13,10 +13,10 @@ static const int8_t vsc16_tx_amc[8][2] = { {15, 3}, {0, 2}, {7, 4}, {9, 10}, {5, 11}, {4, 5}, {2, 6}, {12, 9} }; -static const int8_t vsc16_tx_sfp[8][2] = { {15, 7}, {0, 1}, {7, 8}, {9, 0}, +static int8_t vsc16_tx_sfp[8][2] = { {15, 7}, {0, 1}, {7, 8}, {9, 0}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} }; -static const int8_t vsc16_tx_4sfp_sgmii_12_56[8][2] = { {15, 7}, {0, 1}, +static int8_t vsc16_tx_4sfp_sgmii_12_56[8][2] = { {15, 7}, {0, 1}, {7, 8}, {9, 0}, {2, 14}, {12, 15}, {-1, -1}, {-1, -1} }; @@ -25,7 +25,7 @@ static const int8_t vsc16_tx_4sfp_sgmii_34[8][2] = { {15, 7}, {0, 1}, {-1, -1}, {-1, -1} }; #ifdef CONFIG_PPC_B4420 -static const int8_t vsc16_tx_sgmii_lane_cd[8][2] = { {5, 14}, {4, 15}, +static int8_t vsc16_tx_sgmii_lane_cd[8][2] = { {5, 14}, {4, 15}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} }; #endif @@ -35,10 +35,10 @@ static const int8_t vsc16_tx_aurora[8][2] = { {2, 13}, {12, 12}, {-1, -1}, static const int8_t vsc16_rx_amc[8][2] = { {3, 15}, {2, 1}, {4, 8}, {10, 9}, {11, 11}, {5, 10}, {6, 3}, {9, 12} }; -static const int8_t vsc16_rx_sfp[8][2] = { {8, 15}, {0, 1}, {7, 8}, {1, 9}, +static int8_t vsc16_rx_sfp[8][2] = { {8, 15}, {0, 1}, {7, 8}, {1, 9}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} }; -static const int8_t vsc16_rx_4sfp_sgmii_12_56[8][2] = { {8, 15}, {0, 1}, +static int8_t vsc16_rx_4sfp_sgmii_12_56[8][2] = { {8, 15}, {0, 1}, {7, 8}, {1, 9}, {14, 3}, {15, 12}, {-1, -1}, {-1, -1} }; @@ -47,7 +47,7 @@ static const int8_t vsc16_rx_4sfp_sgmii_34[8][2] = { {8, 15}, {0, 1}, {-1, -1}, {-1, -1} }; #ifdef CONFIG_PPC_B4420 -static const int8_t vsc16_rx_sgmii_lane_cd[8][2] = { {14, 11}, {15, 10}, +static int8_t vsc16_rx_sgmii_lane_cd[8][2] = { {14, 11}, {15, 10}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1}, {-1, -1} }; #endif diff --git a/board/freescale/b4860qds/eth_b4860qds.c b/board/freescale/b4860qds/eth_b4860qds.c index 19ca66e..dc4ef80 100644 --- a/board/freescale/b4860qds/eth_b4860qds.c +++ b/board/freescale/b4860qds/eth_b4860qds.c @@ -201,8 +201,6 @@ int board_eth_init(bd_t *bis) debug("Setting phy addresses for FM1_DTSEC5: %x and" "FM1_DTSEC6: %x\n", CONFIG_SYS_FM1_DTSEC5_PHY_ADDR, CONFIG_SYS_FM1_DTSEC6_PHY_ADDR); - /* Fixing Serdes clock by programming FPGA register */ - QIXIS_WRITE(brdcfg[4], QIXIS_SRDS1CLK_125); fm_info_set_phy_address(FM1_DTSEC5, CONFIG_SYS_FM1_DTSEC5_PHY_ADDR); fm_info_set_phy_address(FM1_DTSEC6, diff --git a/board/freescale/bsc9131rdb/ddr.c b/board/freescale/bsc9131rdb/ddr.c index a4161ad..c82fe0a 100644 --- a/board/freescale/bsc9131rdb/ddr.c +++ b/board/freescale/bsc9131rdb/ddr.c @@ -87,7 +87,7 @@ phys_size_t fixed_sdram(void) } ddr_size = (phys_size_t) CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; - fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0); + fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0, 0); if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE, ddr_size, LAW_TRGT_IF_DDR_1) < 0) { diff --git a/board/freescale/bsc9132qds/bsc9132qds.c b/board/freescale/bsc9132qds/bsc9132qds.c index 4574894..a895e4e 100644 --- a/board/freescale/bsc9132qds/bsc9132qds.c +++ b/board/freescale/bsc9132qds/bsc9132qds.c @@ -125,6 +125,27 @@ void board_config_serdes_mux(void) } } +/* Configure DSP DDR controller */ +void dsp_ddr_configure(void) +{ + /* + *There are separate DDR-controllers for DSP and PowerPC side DDR. + *copy the ddr controller settings from PowerPC side DDR controller + *to the DSP DDR controller as connected DDR memories are similar. + */ + ccsr_ddr_t __iomem *pa_ddr = + (ccsr_ddr_t __iomem *)CONFIG_SYS_MPC8xxx_DDR_ADDR; + ccsr_ddr_t temp_ddr; + ccsr_ddr_t __iomem *dsp_ddr = + (ccsr_ddr_t __iomem *)CONFIG_SYS_FSL_DSP_CCSR_DDR_ADDR; + + memcpy(&temp_ddr, pa_ddr, sizeof(ccsr_ddr_t)); + temp_ddr.cs0_bnds = CONFIG_SYS_DDR1_CS0_BNDS; + temp_ddr.sdram_cfg &= ~SDRAM_CFG_MEM_EN; + memcpy(dsp_ddr, &temp_ddr, sizeof(ccsr_ddr_t)); + dsp_ddr->sdram_cfg |= SDRAM_CFG_MEM_EN; +} + int board_early_init_r(void) { #ifndef CONFIG_SYS_NO_FLASH @@ -153,6 +174,7 @@ int board_early_init_r(void) 0, flash_esel+1, BOOKE_PAGESZ_64M, 1); #endif board_config_serdes_mux(); + dsp_ddr_configure(); return 0; } diff --git a/board/freescale/bsc9132qds/ddr.c b/board/freescale/bsc9132qds/ddr.c index 05bea8a..fdea193 100644 --- a/board/freescale/bsc9132qds/ddr.c +++ b/board/freescale/bsc9132qds/ddr.c @@ -109,7 +109,7 @@ phys_size_t fixed_sdram(void) strmhz(buf, ddr_freq)); ddr_size = (phys_size_t) CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; - fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0); + fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0, 0); if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE, ddr_size, LAW_TRGT_IF_DDR_1) < 0) { diff --git a/board/freescale/bsc9132qds/law.c b/board/freescale/bsc9132qds/law.c index fed2edf..e10de9a 100644 --- a/board/freescale/bsc9132qds/law.c +++ b/board/freescale/bsc9132qds/law.c @@ -16,6 +16,14 @@ struct law_entry law_table[] = { #ifdef CONFIG_SYS_FPGA_BASE_PHYS SET_LAW(CONFIG_SYS_FPGA_BASE_PHYS, LAW_SIZE_128K, LAW_TRGT_IF_IFC), #endif + SET_LAW(CONFIG_SYS_FSL_DSP_CCSRBAR_PHYS, LAW_SIZE_1M, + LAW_TRGT_IF_DSP_CCSR), + SET_LAW(CONFIG_SYS_FSL_DSP_M2_RAM_ADDR, LAW_SIZE_32M, + LAW_TRGT_IF_OCN_DSP), + SET_LAW(CONFIG_SYS_FSL_DSP_M3_RAM_ADDR, LAW_SIZE_32K, + LAW_TRGT_IF_CLASS_DSP), + SET_LAW(CONFIG_SYS_FSL_DSP_DDR_ADDR, LAW_SIZE_1G, + LAW_TRGT_IF_CLASS_DSP) }; int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/bsc9132qds/tlb.c b/board/freescale/bsc9132qds/tlb.c index 6d82353..02655e9 100644 --- a/board/freescale/bsc9132qds/tlb.c +++ b/board/freescale/bsc9132qds/tlb.c @@ -41,6 +41,11 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 1, BOOKE_PAGESZ_1M, 1), + /* CCSRBAR (DSP) */ + SET_TLB_ENTRY(1, CONFIG_SYS_FSL_DSP_CCSRBAR, + CONFIG_SYS_FSL_DSP_CCSRBAR_PHYS, MAS3_SW|MAS3_SR, + MAS2_I|MAS2_G, 0, 2, BOOKE_PAGESZ_1M, 1), + #ifndef CONFIG_SPL_BUILD SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, diff --git a/arch/arm/cpu/arm1136/omap24xx/Makefile b/board/freescale/c29xpcie/Makefile index 7d76d96..ab8eb8f 100644 --- a/arch/arm/cpu/arm1136/omap24xx/Makefile +++ b/board/freescale/c29xpcie/Makefile @@ -1,24 +1,23 @@ # -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# Copyright 2013 Freescale Semiconductor, Inc. # # SPDX-License-Identifier: GPL-2.0+ -# include $(TOPDIR)/config.mk -LIB = $(obj)lib$(SOC).o - -SOBJS = reset.o - -COBJS = timer.o +LIB = $(obj)lib$(BOARD).o -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +COBJS-y += $(BOARD).o +COBJS-y += cpld.o +COBJS-y += ddr.o +COBJS-y += law.o +COBJS-y += tlb.o -all: $(obj).depend $(LIB) +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(OBJS) +$(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) ######################################################################### diff --git a/board/freescale/c29xpcie/README b/board/freescale/c29xpcie/README new file mode 100644 index 0000000..430f0824 --- /dev/null +++ b/board/freescale/c29xpcie/README @@ -0,0 +1,100 @@ +Overview +========= +C29XPCIE board is a series of Freescale PCIe add-in cards to perform +as public key crypto accelerator or secure key management module. +It includes C293PCIE board, C293PCIE board and C291PCIE board. +The Freescale C29x family is a high performance crypto co-processor. +It combines a single e500v2 core with necessary SEC engines. +(maximum core frequency 1000/1200 MHz). + +The C29xPCIE board features are as follows: +Memory subsystem: + - 512Mbyte unbuffered DDR3 SDRAM discrete devices (32-bit bus) + - 64 Mbyte NOR flash single-chip memory + - 4 Gbyte NAND flash memory + - 1 Mbit AT24C1024 I2C EEPROM + - 16 Mbyte SPI memory + +Interfaces: + - 10/100/1000 BaseT Ethernet ports: + - eTSEC1, RGMII: one 10/100/1000 port + - eTSEC2, RGMII: one 10/100/1000 port + - DUART interface: + - DUART interface: supports two UARTs up to 115200 bps for + console display + +Board connectors: + - Mini-ITX power supply connector + - JTAG/COP for debugging + +Physical Memory Map on C29xPCIE +=============================== +Address Start Address End Memory type +0x0_0000_0000 - 0x0_1fff_ffff 512MB DDR +0xc_0000_0000 - 0xc_8fff_ffff 256MB PCIE memory +0xf_ec00_0000 - 0xf_efff_ffff 64MB NOR flash +0xf_ffb0_0000 - 0xf_ffb7_ffff 512KB SRAM +0xf_ffc0_0000 - 0xf_ffc0_ffff 64KB PCIE IO +0xf_ffdf_0000 - 0xf_ffdf_0fff 4KB CPLD +0xf_ffe0_0000 - 0xf_ffef_ffff 1MB CCSR + +Serial Port Configuration on C29xPCIE +===================================== +Configure the serial port of the attached computer with the following values: + -Data rate: 115200 bps + -Number of data bits: 8 + -Parity: None + -Number of Stop bits: 1 + -Flow Control: Hardware/None + +Settings of DIP-switch +====================== + SW5[1:4]= 1111 and SW5[6]=0 for boot from 16bit NOR flash + SW5[1:4]= 0110 and SW5[6]=0 for boot from SPI flash +Note: 1 stands for 'off', 0 stands for 'on' + +Build and program u-boot to NOR flash +================================== +1. Build u-boot.bin image example: + export ARCH=powerpc + export CROSS_COMPILE=/your_path/powerpc-linux-gnu- + make C293PCIE + +2. Program u-boot.bin into NOR flash + => tftp $loadaddr $uboot + => protect off eff80000 +$filesize + => erase eff80000 +$filesize + => cp.b $loadaddr eff80000 $filesize + +3. Check SW5[1:4]= 1111 and SW5[6]=0, then power on. + +Alternate NOR bank +================== +There are four banks in C29XPCIE board, example to change bank booting: +1. Program u-boot.bin into alternate NOR bank + => tftp $loadaddr $uboot + => protect off e9f80000 +$filesize + => erase e9f80000 +$filesize + => cp.b $loadaddr e9f80000 $filesize + +2. Switch to alternate NOR bank + => cpld_cmd reset altbank [bank] + - [bank] bank value select 1-4 + - bank 1 on the flash 0x0000000~0x0ffffff + - bank 2 on the flash 0x1000000~0x1ffffff + - bank 3 on the flash 0x2000000~0x2ffffff + - bank 4 on the flash 0x3000000~0x3ffffff + or set SW5[7]= ON/OFF and SW5[7]= ON/OFF, then power on again. + +Build and program u-boot to SPI flash +================================== +1. Build u-boot-spi.bin image + make C29xPCIE_SPIFLASH_config; make + Need the boot_format tool to generate u-boot-spi.bin from the u-boot.bin. + +2. Program u-boot-spi.bin into SPI flash + => tftp $loadaddr $uboot-spi + => sf erase 0 100000 + => sf write $loadaddr 0 $filesize + +3. Check SW5[1:4]= 0110 and SW5[6]=0, then power on. diff --git a/board/freescale/c29xpcie/c29xpcie.c b/board/freescale/c29xpcie/c29xpcie.c new file mode 100644 index 0000000..48c4b30 --- /dev/null +++ b/board/freescale/c29xpcie/c29xpcie.c @@ -0,0 +1,148 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/processor.h> +#include <asm/mmu.h> +#include <asm/cache.h> +#include <asm/immap_85xx.h> +#include <asm/io.h> +#include <miiphy.h> +#include <libfdt.h> +#include <fdt_support.h> +#include <fsl_mdio.h> +#include <tsec.h> +#include <mmc.h> +#include <netdev.h> +#include <pci.h> +#include <asm/fsl_ifc.h> +#include <asm/fsl_pci.h> + +#include "cpld.h" + +DECLARE_GLOBAL_DATA_PTR; + +int checkboard(void) +{ + struct cpu_type *cpu = gd->arch.cpu; + struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); + + printf("Board: %sPCIe, ", cpu->name); + printf("CPLD Ver: 0x%02x\n", in_8(&cpld_data->cpldver)); + + return 0; +} + +int board_early_init_f(void) +{ + struct fsl_ifc *ifc = (void *)CONFIG_SYS_IFC_ADDR; + + /* Clock configuration to access CPLD using IFC(GPCM) */ + setbits_be32(&ifc->ifc_gcr, 1 << IFC_GCR_TBCTL_TRN_TIME_SHIFT); + + return 0; +} + +int board_early_init_r(void) +{ + const unsigned long flashbase = CONFIG_SYS_FLASH_BASE; + const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); + + /* + * Remap Boot flash region to caching-inhibited + * so that flash can be erased properly. + */ + + /* Flush d-cache and invalidate i-cache of any FLASH data */ + flush_dcache(); + invalidate_icache(); + + /* invalidate existing TLB entry for flash */ + disable_tlb(flash_esel); + + set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, + MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, flash_esel, BOOKE_PAGESZ_64M, 1); + + return 0; +} + +#ifdef CONFIG_PCI +void pci_init_board(void) +{ + fsl_pcie_init_board(0); +} +#endif /* ifdef CONFIG_PCI */ + +#ifdef CONFIG_TSEC_ENET +int board_eth_init(bd_t *bis) +{ + struct fsl_pq_mdio_info mdio_info; + struct tsec_info_struct tsec_info[2]; + int num = 0; + +#ifdef CONFIG_TSEC1 + SET_STD_TSEC_INFO(tsec_info[num], 1); + num++; +#endif +#ifdef CONFIG_TSEC2 + SET_STD_TSEC_INFO(tsec_info[num], 2); + num++; +#endif + if (!num) { + printf("No TSECs initialized\n"); + return 0; + } + + /* Register 1G MDIO bus */ + mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR; + mdio_info.name = DEFAULT_MII_NAME; + + fsl_pq_mdio_init(bis, &mdio_info); + + tsec_eth_init(bis, tsec_info, num); + + return pci_eth_init(bis); +} +#endif + +#if defined(CONFIG_OF_BOARD_SETUP) +void fdt_del_sec(void *blob, int offset) +{ + int nodeoff = 0; + + while ((nodeoff = fdt_node_offset_by_compat_reg(blob, "fsl,sec-v6.0", + CONFIG_SYS_CCSRBAR_PHYS + CONFIG_SYS_FSL_SEC_OFFSET + + offset * 0x20000)) >= 0) { + fdt_del_node(blob, nodeoff); + offset++; + } +} + +void ft_board_setup(void *blob, bd_t *bd) +{ + phys_addr_t base; + phys_size_t size; + struct cpu_type *cpu; + + cpu = gd->arch.cpu; + + ft_cpu_setup(blob, bd); + + base = getenv_bootm_low(); + size = getenv_bootm_size(); + +#if defined(CONFIG_PCI) + FT_FSL_PCI_SETUP; +#endif + + fdt_fixup_memory(blob, (u64)base, (u64)size); + if (cpu->soc_ver == SVR_C291) + fdt_del_sec(blob, 1); + else if (cpu->soc_ver == SVR_C292) + fdt_del_sec(blob, 2); +} +#endif diff --git a/board/freescale/c29xpcie/cpld.c b/board/freescale/c29xpcie/cpld.c new file mode 100644 index 0000000..5cbccff --- /dev/null +++ b/board/freescale/c29xpcie/cpld.c @@ -0,0 +1,131 @@ +/** + * Copyright 2013 Freescale Semiconductor + * Author: Mingkai Hu <Mingkai.hu@freescale.com> + * Po Liu <Po.Liu@freescale.com> + * + * SPDX-License-Identifier: GPL-2.0+ + * + * This file provides support for the board-specific CPLD used on some Freescale + * reference boards. + * + * The following macros need to be defined: + * + * CONFIG_SYS_CPLD_BASE - The virtual address of the base of the + * CPLD register map + * + */ + +#include <common.h> +#include <command.h> +#include <asm/io.h> + +#include "cpld.h" +/** + * Set the boot bank to the alternate bank + */ +void cpld_set_altbank(u8 banksel) +{ + struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); + u8 reg11; + + reg11 = in_8(&cpld_data->flhcsr); + + switch (banksel) { + case 1: + out_8(&cpld_data->flhcsr, (reg11 & CPLD_BANKSEL_MASK) + | CPLD_BANKSEL_EN | CPLD_SELECT_BANK1); + break; + case 2: + out_8(&cpld_data->flhcsr, (reg11 & CPLD_BANKSEL_MASK) + | CPLD_BANKSEL_EN | CPLD_SELECT_BANK2); + break; + case 3: + out_8(&cpld_data->flhcsr, (reg11 & CPLD_BANKSEL_MASK) + | CPLD_BANKSEL_EN | CPLD_SELECT_BANK3); + break; + case 4: + out_8(&cpld_data->flhcsr, (reg11 & CPLD_BANKSEL_MASK) + | CPLD_BANKSEL_EN | CPLD_SELECT_BANK4); + break; + default: + printf("Invalid value! [1-4]\n"); + return; + } + + udelay(100); + do_reset(NULL, 0, 0, NULL); +} + +/** + * Set the boot bank to the default bank + */ +void cpld_set_defbank(void) +{ + cpld_set_altbank(4); +} + +#ifdef DEBUG +static void cpld_dump_regs(void) +{ + struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE); + + printf("chipid1 = 0x%02x\n", in_8(&cpld_data->chipid1)); + printf("chipid2 = 0x%02x\n", in_8(&cpld_data->chipid2)); + printf("hwver = 0x%02x\n", in_8(&cpld_data->hwver)); + printf("cpldver = 0x%02x\n", in_8(&cpld_data->cpldver)); + printf("rstcon = 0x%02x\n", in_8(&cpld_data->rstcon)); + printf("flhcsr = 0x%02x\n", in_8(&cpld_data->flhcsr)); + printf("wdcsr = 0x%02x\n", in_8(&cpld_data->wdcsr)); + printf("wdkick = 0x%02x\n", in_8(&cpld_data->wdkick)); + printf("fancsr = 0x%02x\n", in_8(&cpld_data->fancsr)); + printf("ledcsr = 0x%02x\n", in_8(&cpld_data->ledcsr)); + printf("misc = 0x%02x\n", in_8(&cpld_data->misccsr)); + printf("bootor = 0x%02x\n", in_8(&cpld_data->bootor)); + printf("bootcfg1 = 0x%02x\n", in_8(&cpld_data->bootcfg1)); + printf("bootcfg2 = 0x%02x\n", in_8(&cpld_data->bootcfg2)); + printf("bootcfg3 = 0x%02x\n", in_8(&cpld_data->bootcfg3)); + printf("bootcfg4 = 0x%02x\n", in_8(&cpld_data->bootcfg4)); + putc('\n'); +} +#endif + +int cpld_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + int rc = 0; + unsigned char value; + + if (argc <= 1) + return cmd_usage(cmdtp); + + if (strcmp(argv[1], "reset") == 0) { + if (!strcmp(argv[2], "altbank") && argv[3]) { + value = (u8)simple_strtoul(argv[3], NULL, 16); + cpld_set_altbank(value); + } else if (!argv[2]) + cpld_set_defbank(); + else + cmd_usage(cmdtp); +#ifdef DEBUG + } else if (strcmp(argv[1], "dump") == 0) { + cpld_dump_regs(); +#endif + } else + rc = cmd_usage(cmdtp); + + return rc; +} + +U_BOOT_CMD( + cpld_cmd, CONFIG_SYS_MAXARGS, 1, cpld_cmd, + "Reset the board using the CPLD sequencer", + "reset - hard reset to default bank 4\n" + "cpld_cmd reset altbank [bank]- reset to alternate bank\n" + " - [bank] bank value select 1-4\n" + " - bank 1 on the flash 0x0000000~0x0ffffff\n" + " - bank 2 on the flash 0x1000000~0x1ffffff\n" + " - bank 3 on the flash 0x2000000~0x2ffffff\n" + " - bank 4 on the flash 0x3000000~0x3ffffff\n" +#ifdef DEBUG + "cpld_cmd dump - display the CPLD registers\n" +#endif + ); diff --git a/board/freescale/c29xpcie/cpld.h b/board/freescale/c29xpcie/cpld.h new file mode 100644 index 0000000..20862a3 --- /dev/null +++ b/board/freescale/c29xpcie/cpld.h @@ -0,0 +1,40 @@ +/** + * Copyright 2013 Freescale Semiconductor + * Author: Mingkai Hu <Mingkai.Hu@freescale.com> + * Po Liu <Po.Liu@freescale.com> + * + * SPDX-License-Identifier: GPL-2.0+ + * + * This file provides support for the ngPIXIS, a board-specific FPGA used on + * some Freescale reference boards. + */ + +/* + * CPLD register set. Feel free to add board-specific #ifdefs where necessary. + */ +struct cpld_data { + u8 chipid1; /* 0x0 - CPLD Chip ID1 Register */ + u8 chipid2; /* 0x1 - CPLD Chip ID2 Register */ + u8 hwver; /* 0x2 - Hardware Version Register */ + u8 cpldver; /* 0x3 - Software Version Register */ + u8 res[12]; + u8 rstcon; /* 0x10 - Reset control register */ + u8 flhcsr; /* 0x11 - Flash control and status Register */ + u8 wdcsr; /* 0x12 - Watchdog control and status Register */ + u8 wdkick; /* 0x13 - Watchdog kick Register */ + u8 fancsr; /* 0x14 - Fan control and status Register */ + u8 ledcsr; /* 0x15 - LED control and status Register */ + u8 misccsr; /* 0x16 - Misc control and status Register */ + u8 bootor; /* 0x17 - Boot configure override Register */ + u8 bootcfg1; /* 0x18 - Boot configure 1 Register */ + u8 bootcfg2; /* 0x19 - Boot configure 2 Register */ + u8 bootcfg3; /* 0x1a - Boot configure 3 Register */ + u8 bootcfg4; /* 0x1b - Boot configure 4 Register */ +}; + +#define CPLD_BANKSEL_EN 0x02 +#define CPLD_BANKSEL_MASK 0x3f +#define CPLD_SELECT_BANK1 0xc0 +#define CPLD_SELECT_BANK2 0x80 +#define CPLD_SELECT_BANK3 0x40 +#define CPLD_SELECT_BANK4 0x00 diff --git a/board/freescale/c29xpcie/ddr.c b/board/freescale/c29xpcie/ddr.c new file mode 100644 index 0000000..b017cfd --- /dev/null +++ b/board/freescale/c29xpcie/ddr.c @@ -0,0 +1,86 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/fsl_law.h> +#include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_ddr_dimm_params.h> + +/* + * Micron MT41J128M16HA-15E + * */ +dimm_params_t ddr_raw_timing = { + .n_ranks = 1, + .rank_density = 536870912u, + .capacity = 536870912u, + .primary_sdram_width = 32, + .ec_sdram_width = 8, + .registered_dimm = 0, + .mirrored_dimm = 0, + .n_row_addr = 14, + .n_col_addr = 10, + .n_banks_per_sdram_device = 8, + .edc_config = 2, + .burst_lengths_bitmask = 0x0c, + + .tCKmin_X_ps = 1650, + .caslat_X = 0x7e << 4, /* 5,6,7,8,9,10 */ + .tAA_ps = 14050, + .tWR_ps = 15000, + .tRCD_ps = 13500, + .tRRD_ps = 75000, + .tRP_ps = 13500, + .tRAS_ps = 40000, + .tRC_ps = 49500, + .tRFC_ps = 160000, + .tWTR_ps = 75000, + .tRTP_ps = 75000, + .refresh_rate_ps = 7800000, + .tFAW_ps = 30000, +}; + +int fsl_ddr_get_dimm_params(dimm_params_t *pdimm, + unsigned int controller_number, + unsigned int dimm_number) +{ + const char dimm_model[] = "Fixed DDR on board"; + + if ((controller_number == 0) && (dimm_number == 0)) { + memcpy(pdimm, &ddr_raw_timing, sizeof(dimm_params_t)); + memset(pdimm->mpart, 0, sizeof(pdimm->mpart)); + memcpy(pdimm->mpart, dimm_model, sizeof(dimm_model) - 1); + } + + return 0; +} + +void fsl_ddr_board_options(memctl_options_t *popts, + dimm_params_t *pdimm, + unsigned int ctrl_num) +{ + int i; + popts->clk_adjust = 2; + popts->cpo_override = 0x1f; + popts->write_data_delay = 4; + popts->half_strength_driver_enable = 1; + popts->bstopre = 0x3cf; + popts->quad_rank_present = 1; + popts->rtt_override = 1; + popts->rtt_override_value = 1; + popts->dynamic_power = 1; + /* Write leveling override */ + popts->wrlvl_en = 1; + popts->wrlvl_override = 1; + popts->wrlvl_sample = 0xf; + popts->wrlvl_start = 0x4; + popts->trwt_override = 1; + popts->trwt = 0; + + for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { + popts->cs_local_opts[i].odt_rd_cfg = FSL_DDR_ODT_NEVER; + popts->cs_local_opts[i].odt_wr_cfg = FSL_DDR_ODT_CS; + } +} diff --git a/board/freescale/c29xpcie/law.c b/board/freescale/c29xpcie/law.c new file mode 100644 index 0000000..cd8fc21 --- /dev/null +++ b/board/freescale/c29xpcie/law.c @@ -0,0 +1,19 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/fsl_law.h> +#include <asm/mmu.h> + +struct law_entry law_table[] = { + SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_64M, LAW_TRGT_IF_IFC), + SET_LAW(CONFIG_SYS_CPLD_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC), + SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_16K, LAW_TRGT_IF_IFC), + SET_LAW(CONFIG_SYS_PLATFORM_SRAM_BASE_PHYS, LAW_SIZE_512K, + LAW_TRGT_IF_PLATFORM_SRAM), +}; + +int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/c29xpcie/tlb.c b/board/freescale/c29xpcie/tlb.c new file mode 100644 index 0000000..ddd1ef8 --- /dev/null +++ b/board/freescale/c29xpcie/tlb.c @@ -0,0 +1,76 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/mmu.h> + +struct fsl_e_tlb_entry tlb_table[] = { + /* TLB 0 - for temp stack in cache */ + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , + CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , + CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , + CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + + /* TLB 1 */ + SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, + MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 0, BOOKE_PAGESZ_1M, 1), + + SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, + MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, + 0, 1, BOOKE_PAGESZ_64M, 1), + +#ifdef CONFIG_PCI + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS, + MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 2, BOOKE_PAGESZ_256M, 1), + + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS, + MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 3, BOOKE_PAGESZ_256K, 1), +#endif + + SET_TLB_ENTRY(1, CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_BASE_PHYS, + MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 4, BOOKE_PAGESZ_4K, 1), + + SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS, + MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 5, BOOKE_PAGESZ_16K, 1), + + SET_TLB_ENTRY(1, CONFIG_SYS_PLATFORM_SRAM_BASE, + CONFIG_SYS_PLATFORM_SRAM_BASE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 6, BOOKE_PAGESZ_256K, 1), + SET_TLB_ENTRY(1, CONFIG_SYS_PLATFORM_SRAM_BASE + 0x40000, + CONFIG_SYS_PLATFORM_SRAM_BASE_PHYS + 0x40000, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 7, BOOKE_PAGESZ_256K, 1), + +#ifdef CONFIG_SYS_RAMBOOT + SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, + CONFIG_SYS_DDR_SDRAM_BASE, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 8, BOOKE_PAGESZ_256M, 1), + SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000, + CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 9, BOOKE_PAGESZ_256M, 1), +#endif +}; + +int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile index d451f6f..f9550c4 100644 --- a/board/freescale/common/Makefile +++ b/board/freescale/common/Makefile @@ -45,15 +45,14 @@ COBJS-$(CONFIG_MPC8555CDS) += cds_pci_ft.o COBJS-$(CONFIG_MPC8536DS) += ics307_clk.o COBJS-$(CONFIG_MPC8572DS) += ics307_clk.o -ifndef CONFIG_SPL_BUILD COBJS-$(CONFIG_P1022DS) += ics307_clk.o -endif COBJS-$(CONFIG_P2020DS) += ics307_clk.o COBJS-$(CONFIG_P3041DS) += ics307_clk.o COBJS-$(CONFIG_P4080DS) += ics307_clk.o COBJS-$(CONFIG_P5020DS) += ics307_clk.o COBJS-$(CONFIG_P5040DS) += ics307_clk.o COBJS-$(CONFIG_VSC_CROSSBAR) += vsc3316_3308.o +COBJS-$(CONFIG_IDT8T49N222A) += idt8t49n222a_serdes_clk.o # deal with common files for P-series corenet based devices SUBLIB-$(CONFIG_P2041RDB) += p_corenet/libp_corenet.o diff --git a/board/freescale/common/idt8t49n222a_serdes_clk.c b/board/freescale/common/idt8t49n222a_serdes_clk.c new file mode 100644 index 0000000..d347162 --- /dev/null +++ b/board/freescale/common/idt8t49n222a_serdes_clk.c @@ -0,0 +1,207 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * Author: Shaveta Leekha <shaveta@freescale.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include "idt8t49n222a_serdes_clk.h" + +#define DEVICE_ID_REG 0x00 + +static int check_pll_status(u8 idt_addr) +{ + u8 val = 0; + int ret; + + ret = i2c_read(idt_addr, 0x17, 1, &val, 1); + if (ret < 0) { + printf("IDT:0x%x could not read status register from device.\n", + idt_addr); + return ret; + } + + if (val & 0x04) { + debug("idt8t49n222a PLL is LOCKED: %x\n", val); + } else { + printf("idt8t49n222a PLL is not LOCKED: %x\n", val); + return -1; + } + + return 0; +} + +int set_serdes_refclk(u8 idt_addr, u8 serdes_num, + enum serdes_refclk refclk1, + enum serdes_refclk refclk2, u8 feedback) +{ + u8 dev_id = 0; + int i, ret; + + debug("IDT:Configuring idt8t49n222a device at I2C address: 0x%2x\n", + idt_addr); + + ret = i2c_read(idt_addr, DEVICE_ID_REG, 1, &dev_id, 1); + if (ret < 0) { + debug("IDT:0x%x could not read DEV_ID from device.\n", + idt_addr); + return ret; + } + + if ((dev_id != 0x00) && (dev_id != 0x24) && (dev_id != 0x2a)) { + debug("IDT: device at address 0x%x is not idt8t49n222a.\n", + idt_addr); + } + + if (serdes_num != 1 && serdes_num != 2) { + debug("serdes_num should be 1 for SerDes1 and" + " 2 for SerDes2.\n"); + return -1; + } + + if ((refclk1 == SERDES_REFCLK_122_88 && refclk2 != SERDES_REFCLK_122_88) + || (refclk1 != SERDES_REFCLK_122_88 + && refclk2 == SERDES_REFCLK_122_88)) { + debug("Only one refclk at 122.88MHz is not supported." + " Please set both refclk1 & refclk2 to 122.88MHz" + " or both not to 122.88MHz.\n"); + return -1; + } + + if (refclk1 != SERDES_REFCLK_100 && refclk1 != SERDES_REFCLK_122_88 + && refclk1 != SERDES_REFCLK_125 + && refclk1 != SERDES_REFCLK_156_25) { + debug("refclk1 should be 100MHZ, 122.88MHz, 125MHz" + " or 156.25MHz.\n"); + return -1; + } + + if (refclk2 != SERDES_REFCLK_100 && refclk2 != SERDES_REFCLK_122_88 + && refclk2 != SERDES_REFCLK_125 + && refclk2 != SERDES_REFCLK_156_25) { + debug("refclk2 should be 100MHZ, 122.88MHz, 125MHz" + " or 156.25MHz.\n"); + return -1; + } + + if (feedback != 0 && feedback != 1) { + debug("valid values for feedback are 0(default) or 1.\n"); + return -1; + } + + /* Configuring IDT for output refclks as + * Refclk1 = 122.88MHz Refclk2 = 122.88MHz + */ + if (refclk1 == SERDES_REFCLK_122_88 && + refclk2 == SERDES_REFCLK_122_88) { + printf("Setting refclk1:122.88 and refclk2:122.88\n"); + for (i = 0; i < NUM_IDT_REGS; i++) + i2c_reg_write(idt_addr, idt_conf_122_88[i][0], + idt_conf_122_88[i][1]); + + if (feedback) { + for (i = 0; i < NUM_IDT_REGS_FEEDBACK; i++) + i2c_reg_write(idt_addr, + idt_conf_122_88_feedback[i][0], + idt_conf_122_88_feedback[i][1]); + } + } + + if (refclk1 != SERDES_REFCLK_122_88 && + refclk2 != SERDES_REFCLK_122_88) { + for (i = 0; i < NUM_IDT_REGS; i++) + i2c_reg_write(idt_addr, idt_conf_not_122_88[i][0], + idt_conf_not_122_88[i][1]); + } + + /* Configuring IDT for output refclks as + * Refclk1 = 100MHz Refclk2 = 125MHz + */ + if (refclk1 == SERDES_REFCLK_100 && refclk2 == SERDES_REFCLK_125) { + printf("Setting refclk1:100 and refclk2:125\n"); + i2c_reg_write(idt_addr, 0x11, 0x10); + } + + /* Configuring IDT for output refclks as + * Refclk1 = 125MHz Refclk2 = 125MHz + */ + if (refclk1 == SERDES_REFCLK_125 && refclk2 == SERDES_REFCLK_125) { + printf("Setting refclk1:125 and refclk2:125\n"); + i2c_reg_write(idt_addr, 0x10, 0x10); + i2c_reg_write(idt_addr, 0x11, 0x10); + } + + /* Configuring IDT for output refclks as + * Refclk1 = 125MHz Refclk2 = 100MHz + */ + if (refclk1 == SERDES_REFCLK_125 && refclk2 == SERDES_REFCLK_100) { + printf("Setting refclk1:125 and refclk2:100\n"); + i2c_reg_write(idt_addr, 0x10, 0x10); + } + + /* Configuring IDT for output refclks as + * Refclk1 = 156.25MHz Refclk2 = 156.25MHz + */ + if (refclk1 == SERDES_REFCLK_156_25 && + refclk2 == SERDES_REFCLK_156_25) { + printf("Setting refclk1:156.25 and refclk2:156.25\n"); + for (i = 0; i < NUM_IDT_REGS_156_25; i++) + i2c_reg_write(idt_addr, idt_conf_156_25[i][0], + idt_conf_156_25[i][1]); + } + + /* Configuring IDT for output refclks as + * Refclk1 = 100MHz Refclk2 = 156.25MHz + */ + if (refclk1 == SERDES_REFCLK_100 && + refclk2 == SERDES_REFCLK_156_25) { + printf("Setting refclk1:100 and refclk2:156.25\n"); + for (i = 0; i < NUM_IDT_REGS_156_25; i++) + i2c_reg_write(idt_addr, idt_conf_100_156_25[i][0], + idt_conf_100_156_25[i][1]); + } + + /* Configuring IDT for output refclks as + * Refclk1 = 125MHz Refclk2 = 156.25MHz + */ + if (refclk1 == SERDES_REFCLK_125 && + refclk2 == SERDES_REFCLK_156_25) { + printf("Setting refclk1:125 and refclk2:156.25\n"); + for (i = 0; i < NUM_IDT_REGS_156_25; i++) + i2c_reg_write(idt_addr, idt_conf_125_156_25[i][0], + idt_conf_125_156_25[i][1]); + } + + /* Configuring IDT for output refclks as + * Refclk1 = 156.25MHz Refclk2 = 100MHz + */ + if (refclk1 == SERDES_REFCLK_156_25 && + refclk2 == SERDES_REFCLK_100) { + printf("Setting refclk1:156.25 and refclk2:100\n"); + for (i = 0; i < NUM_IDT_REGS_156_25; i++) + i2c_reg_write(idt_addr, idt_conf_156_25_100[i][0], + idt_conf_156_25_100[i][1]); + } + + /* Configuring IDT for output refclks as + * Refclk1 = 156.25MHz Refclk2 = 125MHz + */ + if (refclk1 == SERDES_REFCLK_156_25 && + refclk2 == SERDES_REFCLK_125) { + printf("Setting refclk1:156.25 and refclk2:125\n"); + for (i = 0; i < NUM_IDT_REGS_156_25; i++) + i2c_reg_write(idt_addr, idt_conf_156_25_125[i][0], + idt_conf_156_25_125[i][1]); + } + + /* waiting for maximum of 1 second if PLL doesn'r get locked + * initially. then check the status again. + */ + if (check_pll_status(idt_addr)) { + mdelay(1000); + if (check_pll_status(idt_addr)) + return -1; + } + + return 0; +} diff --git a/board/freescale/common/idt8t49n222a_serdes_clk.h b/board/freescale/common/idt8t49n222a_serdes_clk.h new file mode 100644 index 0000000..787bdd9 --- /dev/null +++ b/board/freescale/common/idt8t49n222a_serdes_clk.h @@ -0,0 +1,107 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * Author: Shaveta Leekha <shaveta@freescale.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __IDT8T49N222A_SERDES_CLK_H_ +#define __IDT8T49N222A_SERDES_CLK_H_ 1 + +#include <common.h> +#include <i2c.h> +#include "qixis.h" +#include "../b4860qds/b4860qds_qixis.h" +#include <errno.h> + +#define NUM_IDT_REGS 23 +#define NUM_IDT_REGS_FEEDBACK 12 +#define NUM_IDT_REGS_156_25 11 + +/* CLK */ +enum serdes_refclk { + SERDES_REFCLK_100, /* refclk 100Mhz */ + SERDES_REFCLK_122_88, /* refclk 122.88Mhz */ + SERDES_REFCLK_125, /* refclk 125Mhz */ + SERDES_REFCLK_156_25, /* refclk 156.25Mhz */ + SERDES_REFCLK_NONE = -1, +}; + +/* configuration values for IDT registers for Output Refclks: + * Refclk1 = 122.88MHz Refclk2 = 122.88MHz + */ +static const u8 idt_conf_122_88[23][2] = { {0x00, 0x3C}, {0x01, 0x00}, + {0x02, 0x9F}, {0x03, 0x00}, {0x04, 0x0B}, {0x05, 0x00}, + {0x06, 0x00}, {0x07, 0x00}, {0x08, 0x7D}, {0x09, 0x00}, + {0x0A, 0x08}, {0x0B, 0x00}, {0x0C, 0xDC}, {0x0D, 0x00}, + {0x0E, 0x00}, {0x0F, 0x00}, {0x10, 0x12}, {0x11, 0x12}, + {0x12, 0xB9}, {0x13, 0xBC}, {0x14, 0x40}, {0x15, 0x08}, + {0x16, 0xA0} }; + + +/* configuration values for IDT registers for Output Refclks: + * Refclk1 not equal to 122.88MHz Refclk2 not equal to 122.88MHz + */ +static const u8 idt_conf_not_122_88[23][2] = { {0x00, 0x00}, {0x01, 0x00}, + {0x02, 0x00}, {0x03, 0x00}, {0x04, 0x0A}, {0x05, 0x00}, + {0x06, 0x00}, {0x07, 0x00}, {0x08, 0x7D}, {0x09, 0x00}, + {0x0A, 0x08}, {0x0B, 0x00}, {0x0C, 0xDC}, {0x0D, 0x00}, + {0x0E, 0x00}, {0x0F, 0x00}, {0x10, 0x14}, {0x11, 0x14}, + {0x12, 0x35}, {0x13, 0xBC}, {0x14, 0x40}, {0x15, 0x08}, + {0x16, 0xA0} }; + +/* Reconfiguration values for some of IDT registers for + * Output Refclks: + * Refclk1 = 122.88MHz Refclk2 = 122.88MHz + * and with feedback as 1 + */ +static const u8 idt_conf_122_88_feedback[12][2] = { {0x00, 0x50}, {0x02, 0xD7}, + {0x04, 0x89}, {0x06, 0xC3}, {0x08, 0xC0}, {0x0A, 0x07}, + {0x0C, 0x80}, {0x10, 0x10}, {0x11, 0x10}, {0x12, 0x1B}, + {0x14, 0x00}, {0x15, 0xE8} }; + +/* configuration values for IDT registers for Output Refclks: + * Refclk1 : 156.25MHz Refclk2 : 156.25MHz + */ +static const u8 idt_conf_156_25[11][2] = { {0x04, 0x19}, {0x06, 0x03}, + {0x08, 0xC0}, {0x0A, 0x07}, {0x0C, 0xA1}, {0x0E, 0x20}, + {0x10, 0x10}, {0x11, 0x10}, {0x12, 0xB5}, {0x13, 0x3C}, + {0x15, 0xE8} }; + +/* configuration values for IDT registers for Output Refclks: + * Refclk1 : 100MHz Refclk2 : 156.25MHz + */ +static const u8 idt_conf_100_156_25[11][2] = { {0x04, 0x19}, {0x06, 0x03}, + {0x08, 0xC0}, {0x0A, 0x07}, {0x0C, 0xA1}, {0x0E, 0x20}, + {0x10, 0x19}, {0x11, 0x10}, {0x12, 0xB5}, {0x13, 0x3C}, + {0x15, 0xE8} }; + +/* configuration values for IDT registers for Output Refclks: + * Refclk1 : 125MHz Refclk2 : 156.25MHz + */ +static const u8 idt_conf_125_156_25[11][2] = { {0x04, 0x19}, {0x06, 0x03}, + {0x08, 0xC0}, {0x0A, 0x07}, {0x0C, 0xA1}, {0x0E, 0x20}, + {0x10, 0x14}, {0x11, 0x10}, {0x12, 0xB5}, {0x13, 0x3C}, + {0x15, 0xE8} }; + +/* configuration values for IDT registers for Output Refclks: + * Refclk1 : 156.25MHz Refclk2 : 100MHz + */ +static const u8 idt_conf_156_25_100[11][2] = { {0x04, 0x19}, {0x06, 0x03}, + {0x08, 0xC0}, {0x0A, 0x07}, {0x0C, 0xA1}, {0x0E, 0x20}, + {0x10, 0x10}, {0x11, 0x19}, {0x12, 0xB5}, {0x13, 0x3C}, + {0x15, 0xE8} }; + +/* configuration values for IDT registers for Output Refclks: + * Refclk1 : 156.25MHz Refclk2 : 125MHz + */ +static const u8 idt_conf_156_25_125[11][2] = { {0x04, 0x19}, {0x06, 0x03}, + {0x08, 0xC0}, {0x0A, 0x07}, {0x0C, 0xA1}, {0x0E, 0x20}, + {0x10, 0x10}, {0x11, 0x14}, {0x12, 0xB5}, {0x13, 0x3C}, + {0x15, 0xE8} }; + +int set_serdes_refclk(u8 idt_addr, u8 serdes_num, + enum serdes_refclk refclk1, + enum serdes_refclk refclk2, u8 feedback); + +#endif /*__IDT8T49N222A_SERDES_CLK_H_ */ diff --git a/board/freescale/common/qixis.c b/board/freescale/common/qixis.c index 40ce6b0..a49e300 100644 --- a/board/freescale/common/qixis.c +++ b/board/freescale/common/qixis.c @@ -107,6 +107,26 @@ const char *byte_to_binary_mask(u8 val, u8 mask, char *buf) return buf; } +#ifdef QIXIS_RST_FORCE_MEM +void board_assert_mem_reset(void) +{ + u8 rst; + + rst = QIXIS_READ(rst_frc[0]); + if (!(rst & QIXIS_RST_FORCE_MEM)) + QIXIS_WRITE(rst_frc[0], rst | QIXIS_RST_FORCE_MEM); +} + +void board_deassert_mem_reset(void) +{ + u8 rst; + + rst = QIXIS_READ(rst_frc[0]); + if (rst & QIXIS_RST_FORCE_MEM) + QIXIS_WRITE(rst_frc[0], rst & ~QIXIS_RST_FORCE_MEM); +} +#endif + void qixis_reset(void) { QIXIS_WRITE(rst_ctl, QIXIS_RST_CTL_RESET); diff --git a/board/freescale/common/vsc3316_3308.c b/board/freescale/common/vsc3316_3308.c index 8a3dc33..97a25e8 100644 --- a/board/freescale/common/vsc3316_3308.c +++ b/board/freescale/common/vsc3316_3308.c @@ -31,7 +31,7 @@ int vsc_if_enable(unsigned int vsc_addr) return i2c_write(vsc_addr, INTERFACE_MODE_REG, 1, &data, 1); } -int vsc3316_config(unsigned int vsc_addr, const int8_t con_arr[][2], +int vsc3316_config(unsigned int vsc_addr, int8_t con_arr[][2], unsigned int num_con) { unsigned int i; diff --git a/board/freescale/common/vsc3316_3308.h b/board/freescale/common/vsc3316_3308.h index 4003fcd..2a49187 100644 --- a/board/freescale/common/vsc3316_3308.h +++ b/board/freescale/common/vsc3316_3308.h @@ -12,7 +12,7 @@ #include <errno.h> int vsc_if_enable(unsigned int vsc_addr); -int vsc3316_config(unsigned int vsc_addr, const int8_t con_arr[][2], +int vsc3316_config(unsigned int vsc_addr, int8_t con_arr[][2], unsigned int num_con); int vsc3308_config(unsigned int vsc_addr, const int8_t con_arr[][2], unsigned int num_con); diff --git a/board/freescale/corenet_ds/corenet_ds.c b/board/freescale/corenet_ds/corenet_ds.c index fffb0c8..60e2100 100644 --- a/board/freescale/corenet_ds/corenet_ds.c +++ b/board/freescale/corenet_ds/corenet_ds.c @@ -27,8 +27,10 @@ int checkboard (void) { u8 sw; struct cpu_type *cpu = gd->arch.cpu; - ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; +#if defined(CONFIG_P3041DS) || defined(CONFIG_P5020DS) || \ + defined(CONFIG_P5040DS) unsigned int i; +#endif static const char * const freq[] = {"100", "125", "156.25", "212.5" }; printf("Board: %sDS, ", cpu->name); @@ -47,19 +49,6 @@ int checkboard (void) else printf("invalid setting of SW%u\n", PIXIS_LBMAP_SWITCH); - /* Display the RCW, so that no one gets confused as to what RCW - * we're actually using for this boot. - */ - puts("Reset Configuration Word (RCW):"); - for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) { - u32 rcw = in_be32(&gur->rcwsr[i]); - - if ((i % 4) == 0) - printf("\n %08x:", i * 4); - printf(" %08x", rcw); - } - puts("\n"); - /* Display the actual SERDES reference clocks as configured by the * dip switches on the board. Note that the SWx registers could * technically be set to force the reference clocks to match the diff --git a/board/freescale/corenet_ds/ddr.c b/board/freescale/corenet_ds/ddr.c index da284cd..517e87f 100644 --- a/board/freescale/corenet_ds/ddr.c +++ b/board/freescale/corenet_ds/ddr.c @@ -56,14 +56,14 @@ phys_size_t fixed_sdram(void) ddr_size = (phys_size_t) CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; ddr_cfg_regs.ddr_cdr1 = DDR_CDR1_DHC_EN; - fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0); + fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0, 0); #if (CONFIG_NUM_DDR_CONTROLLERS == 2) memcpy(&ddr_cfg_regs, fixed_ddr_parm_1[i].ddr_settings, sizeof(ddr_cfg_regs)); ddr_cfg_regs.ddr_cdr1 = DDR_CDR1_DHC_EN; - fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 1); + fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 1, 0); #endif /* diff --git a/board/freescale/mpc8540ads/mpc8540ads.c b/board/freescale/mpc8540ads/mpc8540ads.c index 7a84cd2..2fb4037 100644 --- a/board/freescale/mpc8540ads/mpc8540ads.c +++ b/board/freescale/mpc8540ads/mpc8540ads.c @@ -68,7 +68,7 @@ local_bus_init(void) get_sys_info(&sysinfo); clkdiv = lbc->lcrr & LCRR_CLKDIV; - lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; + lbc_hz = sysinfo.freq_systembus / 1000000 / clkdiv; if (lbc_hz < 66) { lbc->lcrr = CONFIG_SYS_LBC_LCRR | LCRR_DBYP; /* DLL Bypass */ diff --git a/board/freescale/mpc8541cds/mpc8541cds.c b/board/freescale/mpc8541cds/mpc8541cds.c index 3d2dabd..1e21a66 100644 --- a/board/freescale/mpc8541cds/mpc8541cds.c +++ b/board/freescale/mpc8541cds/mpc8541cds.c @@ -250,7 +250,7 @@ local_bus_init(void) get_sys_info(&sysinfo); clkdiv = lbc->lcrr & LCRR_CLKDIV; - lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; + lbc_hz = sysinfo.freq_systembus / 1000000 / clkdiv; if (lbc_hz < 66) { lbc->lcrr |= LCRR_DBYP; /* DLL Bypass */ diff --git a/board/freescale/mpc8555cds/mpc8555cds.c b/board/freescale/mpc8555cds/mpc8555cds.c index d4e7abe..ee92695 100644 --- a/board/freescale/mpc8555cds/mpc8555cds.c +++ b/board/freescale/mpc8555cds/mpc8555cds.c @@ -248,7 +248,7 @@ local_bus_init(void) get_sys_info(&sysinfo); clkdiv = lbc->lcrr & LCRR_CLKDIV; - lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; + lbc_hz = sysinfo.freq_systembus / 1000000 / clkdiv; if (lbc_hz < 66) { lbc->lcrr |= LCRR_DBYP; /* DLL Bypass */ diff --git a/board/freescale/mpc8560ads/mpc8560ads.c b/board/freescale/mpc8560ads/mpc8560ads.c index a45a558..162636e 100644 --- a/board/freescale/mpc8560ads/mpc8560ads.c +++ b/board/freescale/mpc8560ads/mpc8560ads.c @@ -273,7 +273,7 @@ local_bus_init(void) get_sys_info(&sysinfo); clkdiv = lbc->lcrr & LCRR_CLKDIV; - lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; + lbc_hz = sysinfo.freq_systembus / 1000000 / clkdiv; if (lbc_hz < 66) { lbc->lcrr = CONFIG_SYS_LBC_LCRR | LCRR_DBYP; /* DLL Bypass */ diff --git a/board/freescale/p1010rdb/ddr.c b/board/freescale/p1010rdb/ddr.c index aa8bada..681f052 100644 --- a/board/freescale/p1010rdb/ddr.c +++ b/board/freescale/p1010rdb/ddr.c @@ -139,7 +139,7 @@ phys_size_t fixed_sdram(void) } ddr_size = (phys_size_t) CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; - fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0); + fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0, 0); if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE, ddr_size, LAW_TRGT_IF_DDR_1) < 0) { diff --git a/board/freescale/p1010rdb/spl_minimal.c b/board/freescale/p1010rdb/spl_minimal.c index 73289f3..d0e712e 100644 --- a/board/freescale/p1010rdb/spl_minimal.c +++ b/board/freescale/p1010rdb/spl_minimal.c @@ -26,7 +26,7 @@ void sdram_init(void) ddr_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO; ddr_ratio = ddr_ratio >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT; - ddr_freq_mhz = (CONFIG_SYS_CLK_FREQ * ddr_ratio) / 0x1000000; + ddr_freq_mhz = (CONFIG_SYS_CLK_FREQ * ddr_ratio) / 1000000; /* mask off E bit */ u32 svr = SVR_SOC_VER(mfspr(SPRN_SVR)); diff --git a/board/freescale/p1022ds/Makefile b/board/freescale/p1022ds/Makefile index cfc05f7..3bc4f43 100644 --- a/board/freescale/p1022ds/Makefile +++ b/board/freescale/p1022ds/Makefile @@ -21,6 +21,9 @@ ifdef MINIMAL COBJS-y += spl_minimal.o tlb.o law.o else +ifdef CONFIG_SPL_BUILD +COBJS-y += spl.o +endif COBJS-y += $(BOARD).o COBJS-y += ddr.o COBJS-y += law.o diff --git a/board/freescale/p1022ds/spl.c b/board/freescale/p1022ds/spl.c new file mode 100644 index 0000000..b9dbf81 --- /dev/null +++ b/board/freescale/p1022ds/spl.c @@ -0,0 +1,121 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <ns16550.h> +#include <malloc.h> +#include <mmc.h> +#include <nand.h> +#include <i2c.h> +#include "../common/ngpixis.h" +#include <fsl_esdhc.h> +#include <spi_flash.h> + +DECLARE_GLOBAL_DATA_PTR; + +static const u32 sysclk_tbl[] = { + 66666000, 7499900, 83332500, 8999900, + 99999000, 11111000, 12499800, 13333200 +}; + +ulong get_effective_memsize(void) +{ + return CONFIG_SYS_L2_SIZE; +} + +void board_init_f(ulong bootflag) +{ + int px_spd; + u32 plat_ratio, sys_clk, bus_clk; + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + + console_init_f(); + + /* Set pmuxcr to allow both i2c1 and i2c2 */ + setbits_be32(&gur->pmuxcr, in_be32(&gur->pmuxcr) | 0x1000); + setbits_be32(&gur->pmuxcr, + in_be32(&gur->pmuxcr) | MPC85xx_PMUXCR_SD_DATA); + +#ifdef CONFIG_SPL_SPI_BOOT + /* Enable the SPI */ + clrsetbits_8(&pixis->brdcfg0, PIXIS_ELBC_SPI_MASK, PIXIS_SPI); +#endif + + /* Read back the register to synchronize the write. */ + in_be32(&gur->pmuxcr); + + /* initialize selected port with appropriate baud rate */ + px_spd = in_8((unsigned char *)(PIXIS_BASE + PIXIS_SPD)); + sys_clk = sysclk_tbl[px_spd & PIXIS_SPD_SYSCLK_MASK]; + plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO; + bus_clk = sys_clk * plat_ratio / 2; + + NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1, + bus_clk / 16 / CONFIG_BAUDRATE); +#ifdef CONFIG_SPL_MMC_BOOT + puts("\nSD boot...\n"); +#elif defined(CONFIG_SPL_SPI_BOOT) + puts("\nSPI Flash boot...\n"); +#endif + + /* copy code to RAM and jump to it - this should not return */ + /* NOTE - code has to be copied out of NAND buffer before + * other blocks can be read. + */ + relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE); +} + +void board_init_r(gd_t *gd, ulong dest_addr) +{ + /* Pointer is writable since we allocated a register for it */ + gd = (gd_t *)CONFIG_SPL_GD_ADDR; + bd_t *bd; + + memset(gd, 0, sizeof(gd_t)); + bd = (bd_t *)(CONFIG_SPL_GD_ADDR + sizeof(gd_t)); + memset(bd, 0, sizeof(bd_t)); + gd->bd = bd; + bd->bi_memstart = CONFIG_SYS_INIT_L2_ADDR; + bd->bi_memsize = CONFIG_SYS_L2_SIZE; + + probecpu(); + get_clocks(); + mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR, + CONFIG_SPL_RELOC_MALLOC_SIZE); +#ifndef CONFIG_SPL_NAND_BOOT + env_init(); +#endif +#ifdef CONFIG_SPL_MMC_BOOT + mmc_initialize(bd); +#endif + /* relocate environment function pointers etc. */ +#ifdef CONFIG_SPL_NAND_BOOT + nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, + (uchar *)CONFIG_ENV_ADDR); + + gd->env_addr = (ulong)(CONFIG_ENV_ADDR); + gd->env_valid = 1; +#else + env_relocate(); +#endif + + i2c_init(CONFIG_SYS_FSL_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + + gd->ram_size = initdram(0); +#ifdef CONFIG_SPL_NAND_BOOT + puts("Tertiary program loader running in sram..."); +#else + puts("Second program loader running in sram...\n"); +#endif + +#ifdef CONFIG_SPL_MMC_BOOT + mmc_boot(); +#elif defined(CONFIG_SPL_SPI_BOOT) + spi_boot(); +#elif defined(CONFIG_SPL_NAND_BOOT) + nand_boot(); +#endif +} diff --git a/board/freescale/p1022ds/spl_minimal.c b/board/freescale/p1022ds/spl_minimal.c index d150d95..8b34396 100644 --- a/board/freescale/p1022ds/spl_minimal.c +++ b/board/freescale/p1022ds/spl_minimal.c @@ -12,51 +12,6 @@ #include <asm/fsl_ddr_sdram.h> -/* - * Fixed sdram init -- doesn't use serial presence detect. - */ -void sdram_init(void) -{ - volatile ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR; - - __raw_writel(CONFIG_SYS_DDR_CS0_BNDS, &ddr->cs0_bnds); - __raw_writel(CONFIG_SYS_DDR_CS0_CONFIG, &ddr->cs0_config); -#if CONFIG_CHIP_SELECTS_PER_CTRL > 1 - __raw_writel(CONFIG_SYS_DDR_CS1_BNDS, &ddr->cs1_bnds); - __raw_writel(CONFIG_SYS_DDR_CS1_CONFIG, &ddr->cs1_config); -#endif - __raw_writel(CONFIG_SYS_DDR_TIMING_3, &ddr->timing_cfg_3); - __raw_writel(CONFIG_SYS_DDR_TIMING_0, &ddr->timing_cfg_0); - __raw_writel(CONFIG_SYS_DDR_TIMING_1, &ddr->timing_cfg_1); - __raw_writel(CONFIG_SYS_DDR_TIMING_2, &ddr->timing_cfg_2); - - __raw_writel(CONFIG_SYS_DDR_CONTROL_2, &ddr->sdram_cfg_2); - __raw_writel(CONFIG_SYS_DDR_MODE_1, &ddr->sdram_mode); - __raw_writel(CONFIG_SYS_DDR_MODE_2, &ddr->sdram_mode_2); - - __raw_writel(CONFIG_SYS_DDR_INTERVAL, &ddr->sdram_interval); - __raw_writel(CONFIG_SYS_DDR_DATA_INIT, &ddr->sdram_data_init); - __raw_writel(CONFIG_SYS_DDR_CLK_CTRL, &ddr->sdram_clk_cntl); - - __raw_writel(CONFIG_SYS_DDR_TIMING_4, &ddr->timing_cfg_4); - __raw_writel(CONFIG_SYS_DDR_TIMING_5, &ddr->timing_cfg_5); - __raw_writel(CONFIG_SYS_DDR_ZQ_CONTROL, &ddr->ddr_zq_cntl); - __raw_writel(CONFIG_SYS_DDR_WRLVL_CONTROL, &ddr->ddr_wrlvl_cntl); - - /* Set, but do not enable the memory */ - __raw_writel(CONFIG_SYS_DDR_CONTROL & ~SDRAM_CFG_MEM_EN, - &ddr->sdram_cfg); - - in_be32(&ddr->sdram_cfg); - udelay(500); - - /* Let the controller go */ - out_be32(&ddr->sdram_cfg, in_be32(&ddr->sdram_cfg) | SDRAM_CFG_MEM_EN); - in_be32(&ddr->sdram_cfg); - - set_next_law(0, CONFIG_SYS_SDRAM_SIZE_LAW, LAW_TRGT_IF_DDR_1); -} - const static u32 sysclk_tbl[] = { 66666000, 7499900, 83332500, 8999900, 99999000, 11111000, 12499800, 13333200 @@ -68,6 +23,10 @@ void board_init_f(ulong bootflag) u32 plat_ratio, sys_clk, bus_clk; ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; +#if defined(CONFIG_SYS_NAND_BR_PRELIM) && defined(CONFIG_SYS_NAND_OR_PRELIM) + set_lbc_br(0, CONFIG_SYS_NAND_BR_PRELIM); + set_lbc_or(0, CONFIG_SYS_NAND_OR_PRELIM); +#endif /* for FPGA */ set_lbc_br(2, CONFIG_SYS_BR2_PRELIM); set_lbc_or(2, CONFIG_SYS_OR2_PRELIM); @@ -83,9 +42,6 @@ void board_init_f(ulong bootflag) puts("\nNAND boot... "); - /* Initialize the DDR3 */ - sdram_init(); - /* copy code to RAM and jump to it - this should not return */ /* NOTE - code has to be copied out of NAND buffer before * other blocks can be read. @@ -96,6 +52,7 @@ void board_init_f(ulong bootflag) void board_init_r(gd_t *gd, ulong dest_addr) { + puts("\nSecond program loader running in sram..."); nand_boot(); } diff --git a/board/freescale/p1022ds/tlb.c b/board/freescale/p1022ds/tlb.c index 2eef6ad..e7ae2e2 100644 --- a/board/freescale/p1022ds/tlb.c +++ b/board/freescale/p1022ds/tlb.c @@ -71,25 +71,32 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 7, BOOKE_PAGESZ_4K, 1), -#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_SPL) +#if defined(CONFIG_SYS_RAMBOOT) || \ + (defined(CONFIG_SPL) && !defined(CONFIG_SPL_COMMON_INIT_DDR)) /* **** - eSDHC/eSPI/NAND boot */ SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 8, BOOKE_PAGESZ_1G, 1), + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 8, BOOKE_PAGESZ_1G, 1), /* **** - eSDHC/eSPI/NAND boot - second 1GB of memory */ SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000, - CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 9, BOOKE_PAGESZ_1G, 1), + CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 9, BOOKE_PAGESZ_1G, 1), #endif #ifdef CONFIG_SYS_NAND_BASE /* *I*G - NAND */ SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 10, BOOKE_PAGESZ_16K, 1), + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 10, BOOKE_PAGESZ_16K, 1), #endif +#ifdef CONFIG_SYS_INIT_L2_ADDR + /* *I*G - L2SRAM */ + SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_G, + 0, 11, BOOKE_PAGESZ_256K, 1) +#endif }; int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/freescale/p1_p2_rdb/ddr.c b/board/freescale/p1_p2_rdb/ddr.c index 0038077..5bee22e 100644 --- a/board/freescale/p1_p2_rdb/ddr.c +++ b/board/freescale/p1_p2_rdb/ddr.c @@ -220,7 +220,7 @@ phys_size_t fixed_sdram (void) ddr_cfg_regs.cs[0].bnds = 0x0000001F; } - fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0); + fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0, 0); set_ddr_laws(0, ddr_size, LAW_TRGT_IF_DDR_1); return ddr_size; diff --git a/board/freescale/p1_p2_rdb_pc/README b/board/freescale/p1_p2_rdb_pc/README index 4437731..f4cc43f 100644 --- a/board/freescale/p1_p2_rdb_pc/README +++ b/board/freescale/p1_p2_rdb_pc/README @@ -3,6 +3,7 @@ Overview P1_P2_RDB_PC represents a set of boards including P1020MSBG-PC P1020RDB-PC + P1020RDB-PD P1020UTM-PC P1021RDB-PC P1024RDB diff --git a/board/freescale/p1_p2_rdb_pc/ddr.c b/board/freescale/p1_p2_rdb_pc/ddr.c index 9355536..c0b72e0 100644 --- a/board/freescale/p1_p2_rdb_pc/ddr.c +++ b/board/freescale/p1_p2_rdb_pc/ddr.c @@ -80,7 +80,7 @@ dimm_params_t ddr_raw_timing = { .refresh_rate_ps = 7800000, .tFAW_ps = 30000, }; -#elif defined(CONFIG_P1020MBG) +#elif (defined(CONFIG_P1020MBG) || defined(CONFIG_P1020RDB_PD)) /* Micron MT41J512M8_187E */ dimm_params_t ddr_raw_timing = { .n_ranks = 2, @@ -111,7 +111,7 @@ dimm_params_t ddr_raw_timing = { .refresh_rate_ps = 7800000, .tFAW_ps = 37500, }; -#elif defined(CONFIG_P1020RDB) +#elif defined(CONFIG_P1020RDB_PC) /* * Samsung K4B2G0846C-HCF8 * The following timing are for "downshift" @@ -247,11 +247,11 @@ phys_size_t fixed_sdram(void) get_sys_info(&sysinfo); printf("Configuring DDR for %s MT/s data rate\n", - strmhz(buf, sysinfo.freqDDRBus)); + strmhz(buf, sysinfo.freq_ddrbus)); ddr_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; - fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0); + fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0, 0); if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE, ddr_size, LAW_TRGT_IF_DDR_1) < 0) { diff --git a/board/freescale/p1_p2_rdb_pc/tlb.c b/board/freescale/p1_p2_rdb_pc/tlb.c index 93896dc..d4561c7 100644 --- a/board/freescale/p1_p2_rdb_pc/tlb.c +++ b/board/freescale/p1_p2_rdb_pc/tlb.c @@ -94,7 +94,7 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 8, BOOKE_PAGESZ_1G, 1), -#ifdef CONFIG_P1020MBG +#if defined(CONFIG_P1020MBG) || defined(CONFIG_P1020RDB_PD) /* 2G DDR on P1020MBG, map the second 1G */ SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000, CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000, diff --git a/board/freescale/p1_twr/Makefile b/board/freescale/p1_twr/Makefile new file mode 100644 index 0000000..915b9bc --- /dev/null +++ b/board/freescale/p1_twr/Makefile @@ -0,0 +1,35 @@ +# +# Copyright 2013 Freescale Semiconductor, Inc. +# +# SPDX-License-Identifier: GPL-2.0+ + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS-y += $(BOARD).o +COBJS-y += ddr.o +COBJS-y += law.o +COBJS-y += tlb.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS)) + +clean: + rm -f $(OBJS) $(SOBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/p1_twr/ddr.c b/board/freescale/p1_twr/ddr.c new file mode 100644 index 0000000..67f69d7 --- /dev/null +++ b/board/freescale/p1_twr/ddr.c @@ -0,0 +1,69 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/mmu.h> +#include <asm/immap_85xx.h> +#include <asm/processor.h> +#include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_ddr_dimm_params.h> +#include <asm/io.h> +#include <asm/fsl_law.h> + +/* Fixed sdram init -- doesn't use serial presence detect. */ +phys_size_t fixed_sdram(void) +{ + sys_info_t sysinfo; + char buf[32]; + size_t ddr_size; + fsl_ddr_cfg_regs_t ddr_cfg_regs = { + .cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS, + .cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG, + .cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2, +#if CONFIG_CHIP_SELECTS_PER_CTRL > 1 + .cs[1].bnds = CONFIG_SYS_DDR_CS1_BNDS, + .cs[1].config = CONFIG_SYS_DDR_CS1_CONFIG, + .cs[1].config_2 = CONFIG_SYS_DDR_CS1_CONFIG_2, +#endif + .timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3, + .timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0, + .timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1, + .timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2, + .ddr_sdram_cfg = CONFIG_SYS_DDR_CONTROL, + .ddr_sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL_2, + .ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1, + .ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2, + .ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL, + .ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL, + .ddr_data_init = CONFIG_SYS_DDR_DATA_INIT, + .ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL, + .ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR, + .ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR, + .timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4, + .timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5, + .ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CONTROL, + .ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CONTROL, + .ddr_sr_cntr = CONFIG_SYS_DDR_SR_CNTR, + .ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1, + .ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2 + }; + + get_sys_info(&sysinfo); + printf("Configuring DDR for %s MT/s data rate\n", + strmhz(buf, sysinfo.freq_ddrbus)); + + ddr_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; + + fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0, 0); + + if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE, + ddr_size, LAW_TRGT_IF_DDR_1) < 0) { + printf("ERROR setting Local Access Windows for DDR\n"); + return 0; + }; + + return ddr_size; +} diff --git a/board/freescale/p1_twr/law.c b/board/freescale/p1_twr/law.c new file mode 100644 index 0000000..e79d8a4 --- /dev/null +++ b/board/freescale/p1_twr/law.c @@ -0,0 +1,16 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/fsl_law.h> +#include <asm/mmu.h> + +struct law_entry law_table[] = { + SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_64M, LAW_TRGT_IF_LBC), + SET_LAW(CONFIG_SYS_SSD_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC) +}; + +int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/p1_twr/p1_twr.c b/board/freescale/p1_twr/p1_twr.c new file mode 100644 index 0000000..ea8db6f --- /dev/null +++ b/board/freescale/p1_twr/p1_twr.c @@ -0,0 +1,281 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <command.h> +#include <hwconfig.h> +#include <pci.h> +#include <i2c.h> +#include <asm/processor.h> +#include <asm/mmu.h> +#include <asm/cache.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_pci.h> +#include <asm/fsl_ddr_sdram.h> +#include <asm/io.h> +#include <asm/fsl_law.h> +#include <asm/fsl_lbc.h> +#include <asm/mp.h> +#include <miiphy.h> +#include <libfdt.h> +#include <fdt_support.h> +#include <fsl_mdio.h> +#include <tsec.h> +#include <ioports.h> +#include <asm/fsl_serdes.h> +#include <netdev.h> + +#define SYSCLK_64 64000000 +#define SYSCLK_66 66666666 + +unsigned long get_board_sys_clk(ulong dummy) +{ + ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + par_io_t *par_io = (par_io_t *) &(gur->qe_par_io); + unsigned int cpdat_val = 0; + + /* Set-up up pin muxing based on board switch settings */ + cpdat_val = par_io[1].cpdat; + + /* Check switch setting for SYSCLK select (PB3) */ + if (cpdat_val & 0x10000000) + return SYSCLK_64; + else + return SYSCLK_66; + + return 0; +} + +#ifdef CONFIG_QE + +#define PCA_IOPORT_I2C_ADDR 0x23 +#define PCA_IOPORT_OUTPUT_CMD 0x2 +#define PCA_IOPORT_CFG_CMD 0x6 + +const qe_iop_conf_t qe_iop_conf_tab[] = { + +#ifdef CONFIG_TWR_P1025 + /* GPIO */ + {1, 0, 1, 0, 0}, + {1, 18, 1, 0, 0}, + + /* GPIO for switch options */ + {1, 2, 2, 0, 0}, /* PROFIBUS_MODE_SEL */ + {1, 3, 2, 0, 0}, /* SYS_CLK_SELECT */ + {1, 29, 2, 0, 0}, /* LOCALBUS_QE_MUXSEL */ + {1, 30, 2, 0, 0}, /* ETH_TDM_SEL */ + + /* QE_MUX_MDC */ + {1, 19, 1, 0, 1}, /* QE_MUX_MDC */ + + /* QE_MUX_MDIO */ + {1, 20, 3, 0, 1}, /* QE_MUX_MDIO */ + + /* UCC_1_MII */ + {0, 23, 2, 0, 2}, /* CLK12 */ + {0, 24, 2, 0, 1}, /* CLK9 */ + {0, 7, 1, 0, 2}, /* ENET1_TXD0_SER1_TXD0 */ + {0, 9, 1, 0, 2}, /* ENET1_TXD1_SER1_TXD1 */ + {0, 11, 1, 0, 2}, /* ENET1_TXD2_SER1_TXD2 */ + {0, 12, 1, 0, 2}, /* ENET1_TXD3_SER1_TXD3 */ + {0, 6, 2, 0, 2}, /* ENET1_RXD0_SER1_RXD0 */ + {0, 10, 2, 0, 2}, /* ENET1_RXD1_SER1_RXD1 */ + {0, 14, 2, 0, 2}, /* ENET1_RXD2_SER1_RXD2 */ + {0, 15, 2, 0, 2}, /* ENET1_RXD3_SER1_RXD3 */ + {0, 5, 1, 0, 2}, /* ENET1_TX_EN_SER1_RTS_B */ + {0, 13, 1, 0, 2}, /* ENET1_TX_ER */ + {0, 4, 2, 0, 2}, /* ENET1_RX_DV_SER1_CTS_B */ + {0, 8, 2, 0, 2}, /* ENET1_RX_ER_SER1_CD_B */ + {0, 17, 2, 0, 2}, /* ENET1_CRS */ + {0, 16, 2, 0, 2}, /* ENET1_COL */ + + /* UCC_5_RMII */ + {1, 11, 2, 0, 1}, /* CLK13 */ + {1, 7, 1, 0, 2}, /* ENET5_TXD0_SER5_TXD0 */ + {1, 10, 1, 0, 2}, /* ENET5_TXD1_SER5_TXD1 */ + {1, 6, 2, 0, 2}, /* ENET5_RXD0_SER5_RXD0 */ + {1, 9, 2, 0, 2}, /* ENET5_RXD1_SER5_RXD1 */ + {1, 5, 1, 0, 2}, /* ENET5_TX_EN_SER5_RTS_B */ + {1, 4, 2, 0, 2}, /* ENET5_RX_DV_SER5_CTS_B */ + {1, 8, 2, 0, 2}, /* ENET5_RX_ER_SER5_CD_B */ + + /* TDMA - clock option is configured in OS based on board setting */ + {1, 23, 2, 0, 2}, /* TDMA_TXD */ + {1, 25, 2, 0, 2}, /* TDMA_RXD */ + {1, 26, 1, 0, 2}, /* TDMA_SYNC */ +#endif + + {0, 0, 0, 0, QE_IOP_TAB_END} /* END of table */ +}; +#endif + +int board_early_init_f(void) +{ + ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + + setbits_be32(&gur->pmuxcr, + (MPC85xx_PMUXCR_SDHC_CD | MPC85xx_PMUXCR_SDHC_WP)); + + /* SDHC_DAT[4:7] not exposed to pins (use as SPI) */ + clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_SD_DATA); + + return 0; +} + +int checkboard(void) +{ + ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u8 boot_status; + + printf("Board: %s\n", CONFIG_BOARDNAME); + + boot_status = ((gur->porbmsr) >> MPC85xx_PORBMSR_ROMLOC_SHIFT) & 0xf; + puts("rom_loc: "); + if (boot_status == PORBMSR_ROMLOC_NOR) + puts("nor flash"); + else if (boot_status == PORBMSR_ROMLOC_SDHC) + puts("sd"); + else + puts("unknown"); + puts("\n"); + + return 0; +} + +#ifdef CONFIG_PCI +void pci_init_board(void) +{ + fsl_pcie_init_board(0); +} +#endif + +int board_early_init_r(void) +{ + const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; + const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); + + /* + * Remap Boot flash region to caching-inhibited + * so that flash can be erased properly. + */ + + /* Flush d-cache and invalidate i-cache of any FLASH data */ + flush_dcache(); + invalidate_icache(); + + /* invalidate existing TLB entry for flash */ + disable_tlb(flash_esel); + + set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, /* tlb, epn, rpn */ + MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, /* perms, wimge */ + 0, flash_esel, BOOKE_PAGESZ_64M, 1);/* ts, esel, tsize, iprot */ + return 0; +} + +int board_eth_init(bd_t *bis) +{ + struct fsl_pq_mdio_info mdio_info; + struct tsec_info_struct tsec_info[4]; + ccsr_gur_t *gur __attribute__((unused)) = + (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + int num = 0; + +#ifdef CONFIG_TSEC1 + SET_STD_TSEC_INFO(tsec_info[num], 1); + num++; +#endif +#ifdef CONFIG_TSEC2 + SET_STD_TSEC_INFO(tsec_info[num], 2); + if (is_serdes_configured(SGMII_TSEC2)) { + printf("eTSEC2 is in sgmii mode.\n"); + tsec_info[num].flags |= TSEC_SGMII; + } + num++; +#endif +#ifdef CONFIG_TSEC3 + SET_STD_TSEC_INFO(tsec_info[num], 3); + num++; +#endif + + if (!num) { + printf("No TSECs initialized\n"); + return 0; + } + + mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR; + mdio_info.name = DEFAULT_MII_NAME; + + fsl_pq_mdio_init(bis, &mdio_info); + + tsec_eth_init(bis, tsec_info, num); + +#if defined(CONFIG_UEC_ETH) + /* QE0 and QE3 need to be exposed for UCC1 + * and UCC5 Eth mode (in PMUXCR register). + * Currently QE/LBC muxed pins assumed to be + * LBC for U-Boot and PMUXCR updated by OS if required */ + + uec_standard_init(bis); +#endif + + return pci_eth_init(bis); +} + +#if defined(CONFIG_QE) +static void fdt_board_fixup_qe_pins(void *blob) +{ + int node; + + if (!hwconfig("qe")) { + /* For QE and eLBC pins multiplexing, + * When don't use QE function, remove + * qe node from dt blob. + */ + node = fdt_path_offset(blob, "/qe"); + if (node >= 0) + fdt_del_node(blob, node); + } else { + /* For TWR Peripheral Modules - TWR-SER2 + * board only can support Signal Port MII, + * so delete one UEC node when use MII port. + */ + if (hwconfig("mii")) + node = fdt_path_offset(blob, "/qe/ucc@2400"); + else + node = fdt_path_offset(blob, "/qe/ucc@2000"); + if (node >= 0) + fdt_del_node(blob, node); + } + + return; +} +#endif + +#ifdef CONFIG_OF_BOARD_SETUP +void ft_board_setup(void *blob, bd_t *bd) +{ + phys_addr_t base; + phys_size_t size; + + ft_cpu_setup(blob, bd); + + base = getenv_bootm_low(); + size = getenv_bootm_size(); + + fdt_fixup_memory(blob, (u64)base, (u64)size); + + FT_FSL_PCI_SETUP; + +#ifdef CONFIG_QE + do_fixup_by_compat(blob, "fsl,qe", "status", "okay", + sizeof("okay"), 0); +#endif +#if defined(CONFIG_TWR_P1025) + fdt_board_fixup_qe_pins(blob); +#endif + fdt_fixup_dr_usb(blob, bd); +} +#endif diff --git a/board/freescale/p1_twr/tlb.c b/board/freescale/p1_twr/tlb.c new file mode 100644 index 0000000..308335c --- /dev/null +++ b/board/freescale/p1_twr/tlb.c @@ -0,0 +1,76 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/mmu.h> + +struct fsl_e_tlb_entry tlb_table[] = { + /* TLB 0 - for temp stack in cache */ + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, + CONFIG_SYS_INIT_RAM_ADDR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , + CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , + CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , + CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + + /* TLB 1 */ + /* *I*** - Covers boot page */ + SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I, + 0, 0, BOOKE_PAGESZ_4K, 1), + + /* *I*G* - CCSRBAR */ + SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, + MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 1, BOOKE_PAGESZ_1M, 1), + +#ifndef CONFIG_SPL_BUILD + /* W**G* - Flash, localbus */ + /* This will be changed to *I*G* after relocation to RAM. */ + SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, + MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, + 0, 2, BOOKE_PAGESZ_64M, 1), + + /* W**G* - Flash, localbus */ + /* This will be changed to *I*G* after relocation to RAM. */ + SET_TLB_ENTRY(1, CONFIG_SYS_SSD_BASE, CONFIG_SYS_SSD_BASE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 5, BOOKE_PAGESZ_1M, 1), + +#ifdef CONFIG_PCI + /* *I*G* - PCI memory 1.5G */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS, + MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 3, BOOKE_PAGESZ_1G, 1), + + /* *I*G* - PCI I/O effective: 192K */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS, + MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 4, BOOKE_PAGESZ_256K, 1), +#endif + +#endif + +#ifdef CONFIG_SYS_RAMBOOT + /* *I*G - eSDHC boot */ + SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 8, BOOKE_PAGESZ_1G, 1), +#endif + +}; + +int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/freescale/p2041rdb/p2041rdb.c b/board/freescale/p2041rdb/p2041rdb.c index 08d10bc..60694a6 100644 --- a/board/freescale/p2041rdb/p2041rdb.c +++ b/board/freescale/p2041rdb/p2041rdb.c @@ -28,7 +28,6 @@ int checkboard(void) { u8 sw; struct cpu_type *cpu = gd->arch.cpu; - ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; unsigned int i; printf("Board: %sRDB, ", cpu->name); @@ -39,20 +38,6 @@ int checkboard(void) printf("vBank: %d\n", sw & 0x1); /* - * Display the RCW, so that no one gets confused as to what RCW - * we're actually using for this boot. - */ - puts("Reset Configuration Word (RCW):"); - for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) { - u32 rcw = in_be32(&gur->rcwsr[i]); - - if ((i % 4) == 0) - printf("\n %08x:", i * 4); - printf(" %08x", rcw); - } - puts("\n"); - - /* * Display the actual SERDES reference clocks as configured by the * dip switches on the board. Note that the SWx registers could * technically be set to force the reference clocks to match the diff --git a/board/freescale/t4qds/Makefile b/board/freescale/t4qds/Makefile index 85df066..a2167b3 100644 --- a/board/freescale/t4qds/Makefile +++ b/board/freescale/t4qds/Makefile @@ -8,7 +8,8 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o -COBJS-y += $(BOARD).o +COBJS-$(CONFIG_T4240QDS) += t4240qds.o +COBJS-$(CONFIG_T4240EMU) += t4240emu.o COBJS-y += ddr.o COBJS-$(CONFIG_T4240QDS)+= eth.o COBJS-$(CONFIG_PCI) += pci.o diff --git a/board/freescale/t4qds/ddr.c b/board/freescale/t4qds/ddr.c index 058d625..26ac2a5 100644 --- a/board/freescale/t4qds/ddr.c +++ b/board/freescale/t4qds/ddr.c @@ -13,81 +13,10 @@ #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> #include <asm/fsl_law.h> +#include "ddr.h" DECLARE_GLOBAL_DATA_PTR; -struct board_specific_parameters { - u32 n_ranks; - u32 datarate_mhz_high; - u32 rank_gb; - u32 clk_adjust; - u32 wrlvl_start; - u32 wrlvl_ctl_2; - u32 wrlvl_ctl_3; - u32 cpo; - u32 write_data_delay; - u32 force_2T; -}; - -/* - * This table contains all valid speeds we want to override with board - * specific parameters. datarate_mhz_high values need to be in ascending order - * for each n_ranks group. - */ -static const struct board_specific_parameters udimm0[] = { - /* - * memory controller 0 - * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T - * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay | - */ - {2, 1350, 4, 4, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0}, - {2, 1350, 0, 5, 7, 0x0709090b, 0x0c0c0d09, 0xff, 2, 0}, - {2, 1666, 4, 4, 8, 0x080a0a0d, 0x0d10100b, 0xff, 2, 0}, - {2, 1666, 0, 5, 7, 0x080a0a0c, 0x0d0d0e0a, 0xff, 2, 0}, - {2, 1900, 0, 4, 8, 0x090a0b0e, 0x0f11120c, 0xff, 2, 0}, - {2, 2140, 0, 4, 8, 0x090a0b0e, 0x0f11120c, 0xff, 2, 0}, - {1, 1350, 0, 5, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0}, - {1, 1700, 0, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0}, - {1, 1900, 0, 4, 8, 0x080a0a0c, 0x0e0e0f0a, 0xff, 2, 0}, - {1, 2140, 0, 4, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0}, - {} -}; - -/* - * The three slots have slightly different timing. The center values are good - * for all slots. We use identical speed tables for them. In future use, if - * DIMMs require separated tables, make more entries as needed. - */ -static const struct board_specific_parameters *udimms[] = { - udimm0, -}; - -static const struct board_specific_parameters rdimm0[] = { - /* - * memory controller 0 - * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T - * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay | - */ - {4, 1350, 0, 5, 9, 0x08070605, 0x07080805, 0xff, 2, 0}, - {4, 1666, 0, 5, 8, 0x08070605, 0x07080805, 0xff, 2, 0}, - {4, 2140, 0, 5, 8, 0x08070605, 0x07081805, 0xff, 2, 0}, - {2, 1350, 0, 5, 7, 0x0809090b, 0x0c0c0d09, 0xff, 2, 0}, - {2, 1666, 0, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0}, - {2, 2140, 0, 5, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0}, - {1, 1350, 0, 5, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0}, - {1, 1700, 0, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0}, - {1, 1900, 0, 4, 8, 0x080a0a0c, 0x0e0e0f0a, 0xff, 2, 0}, - {1, 2140, 0, 4, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0}, - {} -}; - -/* - * The three slots have slightly different timing. See comments above. - */ -static const struct board_specific_parameters *rdimms[] = { - rdimm0, -}; - void fsl_ddr_board_options(memctl_options_t *popts, dimm_params_t *pdimm, unsigned int ctrl_num) diff --git a/board/freescale/t4qds/ddr.h b/board/freescale/t4qds/ddr.h new file mode 100644 index 0000000..d0a0951 --- /dev/null +++ b/board/freescale/t4qds/ddr.h @@ -0,0 +1,108 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __DDR_H__ +#define __DDR_H__ +struct board_specific_parameters { + u32 n_ranks; + u32 datarate_mhz_high; + u32 rank_gb; + u32 clk_adjust; + u32 wrlvl_start; + u32 wrlvl_ctl_2; + u32 wrlvl_ctl_3; + u32 cpo; + u32 write_data_delay; + u32 force_2T; +}; + +/* + * These tables contain all valid speeds we want to override with board + * specific parameters. datarate_mhz_high values need to be in ascending order + * for each n_ranks group. + */ + +#ifdef CONFIG_T4240QDS +static const struct board_specific_parameters udimm0[] = { + /* + * memory controller 0 + * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T + * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay | + */ + {2, 1350, 4, 4, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0}, + {2, 1350, 0, 5, 7, 0x0709090b, 0x0c0c0d09, 0xff, 2, 0}, + {2, 1666, 4, 4, 8, 0x080a0a0d, 0x0d10100b, 0xff, 2, 0}, + {2, 1666, 0, 5, 7, 0x080a0a0c, 0x0d0d0e0a, 0xff, 2, 0}, + {2, 1900, 0, 4, 8, 0x090a0b0e, 0x0f11120c, 0xff, 2, 0}, + {2, 2140, 0, 4, 8, 0x090a0b0e, 0x0f11120c, 0xff, 2, 0}, + {1, 1350, 0, 5, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0}, + {1, 1700, 0, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0}, + {1, 1900, 0, 4, 8, 0x080a0a0c, 0x0e0e0f0a, 0xff, 2, 0}, + {1, 2140, 0, 4, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0}, + {} +}; + +static const struct board_specific_parameters rdimm0[] = { + /* + * memory controller 0 + * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T + * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay | + */ + {4, 1350, 0, 5, 9, 0x08070605, 0x06070806, 0xff, 2, 0}, + {4, 1666, 0, 5, 11, 0x0a080706, 0x07090906, 0xff, 2, 0}, + {4, 2140, 0, 5, 12, 0x0b090807, 0x080a0b07, 0xff, 2, 0}, + {2, 1350, 0, 5, 9, 0x08070605, 0x06070806, 0xff, 2, 0}, + {2, 1666, 0, 5, 11, 0x0a090806, 0x08090a06, 0xff, 2, 0}, + {2, 2140, 0, 5, 12, 0x0b090807, 0x080a0b07, 0xff, 2, 0}, + {1, 1350, 0, 5, 9, 0x08070605, 0x06070806, 0xff, 2, 0}, + {1, 1666, 0, 5, 11, 0x0a090806, 0x08090a06, 0xff, 2, 0}, + {1, 2140, 0, 4, 12, 0x0b090807, 0x080a0b07, 0xff, 2, 0}, + {} +}; + +#else /* CONFIG_T4240EMU */ +static const struct board_specific_parameters udimm0[] = { + /* + * memory controller 0 + * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T + * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay | + */ + {2, 2140, 0, 4, 8, 0x0, 0x0, 0xff, 2, 0}, + {1, 2140, 0, 4, 8, 0x0, 0x0, 0xff, 2, 0}, + {} +}; + +static const struct board_specific_parameters rdimm0[] = { + /* + * memory controller 0 + * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T + * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay | + */ + {4, 2140, 0, 5, 8, 0x0, 0x0, 0xff, 2, 0}, + {2, 2140, 0, 5, 8, 0x0, 0x0, 0xff, 2, 0}, + {1, 2140, 0, 4, 8, 0x0, 0x0, 0xff, 2, 0}, + {} +}; +#endif /* CONFIG_T4240EMU */ + +/* + * The three slots have slightly different timing. The center values are good + * for all slots. We use identical speed tables for them. In future use, if + * DIMMs require separated tables, make more entries as needed. + */ +static const struct board_specific_parameters *udimms[] = { + udimm0, +}; + +/* + * The three slots have slightly different timing. See comments above. + */ +static const struct board_specific_parameters *rdimms[] = { + rdimm0, +}; + + +#endif diff --git a/board/freescale/t4qds/eth.c b/board/freescale/t4qds/eth.c index c771e17..b5f488b 100644 --- a/board/freescale/t4qds/eth.c +++ b/board/freescale/t4qds/eth.c @@ -172,7 +172,10 @@ static int t4240qds_mdio_init(char *realbusname, u8 muxval) void board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa, enum fm_port port, int offset) { - if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII) { + int interface = fm_info_get_enet_if(port); + + if (interface == PHY_INTERFACE_MODE_SGMII || + interface == PHY_INTERFACE_MODE_QSGMII) { switch (port) { case FM1_DTSEC1: if (qsgmiiphy_fix[port]) @@ -272,6 +275,7 @@ void fdt_fixup_board_enet(void *fdt) for (i = FM1_DTSEC1; i < NUM_FM_PORTS; i++) { switch (fm_info_get_enet_if(i)) { case PHY_INTERFACE_MODE_SGMII: + case PHY_INTERFACE_MODE_QSGMII: switch (mdio_mux[i]) { case EMI1_SLOT1: fdt_status_okay_by_alias(fdt, "emi1_slot1"); @@ -393,7 +397,7 @@ static void initialize_qsgmiiphy_fix(void) int board_eth_init(bd_t *bis) { #if defined(CONFIG_FMAN_ENET) - int i, idx, lane, slot; + int i, idx, lane, slot, interface; struct memac_mdio_info dtsec_mdio_info; struct memac_mdio_info tgec_mdio_info; ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); @@ -470,9 +474,9 @@ int board_eth_init(bd_t *bis) fm_info_set_phy_address(FM1_DTSEC6, slot_qsgmii_phyaddr[1][1]); if ((srds_prtcl_s2 != 56) && (srds_prtcl_s2 != 57)) { fm_info_set_phy_address(FM1_DTSEC9, - slot_qsgmii_phyaddr[1][3]); - fm_info_set_phy_address(FM1_DTSEC10, slot_qsgmii_phyaddr[1][2]); + fm_info_set_phy_address(FM1_DTSEC10, + slot_qsgmii_phyaddr[1][3]); } break; case 40: @@ -482,9 +486,9 @@ int board_eth_init(bd_t *bis) fm_info_set_phy_address(FM1_DTSEC6, slot_qsgmii_phyaddr[1][1]); if ((srds_prtcl_s2 != 56) && (srds_prtcl_s2 != 57)) { fm_info_set_phy_address(FM1_DTSEC10, - slot_qsgmii_phyaddr[1][3]); - fm_info_set_phy_address(FM1_DTSEC9, slot_qsgmii_phyaddr[1][2]); + fm_info_set_phy_address(FM1_DTSEC9, + slot_qsgmii_phyaddr[1][3]); } fm_info_set_phy_address(FM1_DTSEC1, slot_qsgmii_phyaddr[2][0]); fm_info_set_phy_address(FM1_DTSEC2, slot_qsgmii_phyaddr[2][1]); @@ -498,15 +502,31 @@ int board_eth_init(bd_t *bis) for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) { idx = i - FM1_DTSEC1; - switch (fm_info_get_enet_if(i)) { + interface = fm_info_get_enet_if(i); + switch (interface) { case PHY_INTERFACE_MODE_SGMII: - lane = serdes_get_first_lane(FSL_SRDS_1, + case PHY_INTERFACE_MODE_QSGMII: + if (interface == PHY_INTERFACE_MODE_QSGMII) { + if (idx <= 3) + lane = serdes_get_first_lane(FSL_SRDS_1, + QSGMII_FM1_A); + else + lane = serdes_get_first_lane(FSL_SRDS_1, + QSGMII_FM1_B); + if (lane < 0) + break; + slot = lane_to_slot_fsm1[lane]; + debug("FM1@DTSEC%u expects QSGMII in slot %u\n", + idx + 1, slot); + } else { + lane = serdes_get_first_lane(FSL_SRDS_1, SGMII_FM1_DTSEC1 + idx); - if (lane < 0) - break; - slot = lane_to_slot_fsm1[lane]; - debug("FM1@DTSEC%u expects SGMII in slot %u\n", - idx + 1, slot); + if (lane < 0) + break; + slot = lane_to_slot_fsm1[lane]; + debug("FM1@DTSEC%u expects SGMII in slot %u\n", + idx + 1, slot); + } if (QIXIS_READ(present2) & (1 << (slot - 1))) fm_disable_port(i); switch (slot) { @@ -600,8 +620,8 @@ int board_eth_init(bd_t *bis) fm_info_set_phy_address(FM2_DTSEC4, slot_qsgmii_phyaddr[4][3]); fm_info_set_phy_address(FM2_DTSEC5, slot_qsgmii_phyaddr[3][0]); fm_info_set_phy_address(FM2_DTSEC6, slot_qsgmii_phyaddr[3][1]); - fm_info_set_phy_address(FM2_DTSEC9, slot_qsgmii_phyaddr[3][3]); - fm_info_set_phy_address(FM2_DTSEC10, slot_qsgmii_phyaddr[3][2]); + fm_info_set_phy_address(FM2_DTSEC9, slot_qsgmii_phyaddr[3][2]); + fm_info_set_phy_address(FM2_DTSEC10, slot_qsgmii_phyaddr[3][3]); break; case 40: case 46: @@ -641,15 +661,31 @@ int board_eth_init(bd_t *bis) for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) { idx = i - FM2_DTSEC1; - switch (fm_info_get_enet_if(i)) { + interface = fm_info_get_enet_if(i); + switch (interface) { case PHY_INTERFACE_MODE_SGMII: - lane = serdes_get_first_lane(FSL_SRDS_2, + case PHY_INTERFACE_MODE_QSGMII: + if (interface == PHY_INTERFACE_MODE_QSGMII) { + if (idx <= 3) + lane = serdes_get_first_lane(FSL_SRDS_2, + QSGMII_FM2_A); + else + lane = serdes_get_first_lane(FSL_SRDS_2, + QSGMII_FM2_B); + if (lane < 0) + break; + slot = lane_to_slot_fsm2[lane]; + debug("FM2@DTSEC%u expects QSGMII in slot %u\n", + idx + 1, slot); + } else { + lane = serdes_get_first_lane(FSL_SRDS_2, SGMII_FM2_DTSEC1 + idx); - if (lane < 0) - break; - slot = lane_to_slot_fsm2[lane]; - debug("FM2@DTSEC%u expects SGMII in slot %u\n", - idx + 1, slot); + if (lane < 0) + break; + slot = lane_to_slot_fsm2[lane]; + debug("FM2@DTSEC%u expects SGMII in slot %u\n", + idx + 1, slot); + } if (QIXIS_READ(present2) & (1 << (slot - 1))) fm_disable_port(i); switch (slot) { diff --git a/board/freescale/t4qds/law.c b/board/freescale/t4qds/law.c index 63549df..367783b 100644 --- a/board/freescale/t4qds/law.c +++ b/board/freescale/t4qds/law.c @@ -19,7 +19,9 @@ struct law_entry law_table[] = { #ifdef CONFIG_SYS_QMAN_MEM_PHYS SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN), #endif +#ifdef QIXIS_BASE_PHYS SET_LAW(QIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC), +#endif #ifdef CONFIG_SYS_DCSRBAR_PHYS /* Limit DCSR to 32M to access NPC Trace Buffer */ SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_DCSR), diff --git a/board/freescale/t4qds/t4240emu.c b/board/freescale/t4qds/t4240emu.c new file mode 100644 index 0000000..7a61036 --- /dev/null +++ b/board/freescale/t4qds/t4240emu.c @@ -0,0 +1,80 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <command.h> +#include <i2c.h> +#include <netdev.h> +#include <linux/compiler.h> +#include <asm/mmu.h> +#include <asm/processor.h> +#include <asm/cache.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_law.h> +#include <asm/fsl_serdes.h> +#include <asm/fsl_portals.h> +#include <asm/fsl_liodn.h> + +DECLARE_GLOBAL_DATA_PTR; + +int checkboard(void) +{ + struct cpu_type *cpu = gd->arch.cpu; + + printf("Board: %sEMU\n", cpu->name); + + return 0; +} + +int board_early_init_r(void) +{ + const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; + const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); + + /* + * Remap Boot flash + PROMJET region to caching-inhibited + * so that flash can be erased properly. + */ + + /* Flush d-cache and invalidate i-cache of any FLASH data */ + flush_dcache(); + invalidate_icache(); + + /* invalidate existing TLB entry for flash */ + disable_tlb(flash_esel); + + set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, + MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, flash_esel, BOOKE_PAGESZ_256M, 1); + + set_liodns(); +#ifdef CONFIG_SYS_DPAA_QBMAN + setup_portals(); +#endif + + return 0; +} + +int misc_init_r(void) +{ + return 0; +} + +void ft_board_setup(void *blob, bd_t *bd) +{ + phys_addr_t base; + phys_size_t size; + + ft_cpu_setup(blob, bd); + + base = getenv_bootm_low(); + size = getenv_bootm_size(); + + fdt_fixup_memory(blob, (u64)base, (u64)size); + + fdt_fixup_liodn(blob); + fdt_fixup_dr_usb(blob, bd); +} diff --git a/board/freescale/t4qds/t4qds.c b/board/freescale/t4qds/t4240qds.c index aa6a217..0c1a4fb 100644 --- a/board/freescale/t4qds/t4qds.c +++ b/board/freescale/t4qds/t4240qds.c @@ -26,16 +26,16 @@ DECLARE_GLOBAL_DATA_PTR; -static const int8_t vsc3316_fsm1_tx[8][2] = { {0, 0}, {1, 1}, {6, 6}, {7, 7}, +static int8_t vsc3316_fsm1_tx[8][2] = { {0, 0}, {1, 1}, {6, 6}, {7, 7}, {8, 8}, {9, 9}, {14, 14}, {15, 15} }; -static const int8_t vsc3316_fsm2_tx[8][2] = { {2, 2}, {3, 3}, {4, 4}, {5, 5}, +static int8_t vsc3316_fsm2_tx[8][2] = { {2, 2}, {3, 3}, {4, 4}, {5, 5}, {10, 10}, {11, 11}, {12, 12}, {13, 13} }; -static const int8_t vsc3316_fsm1_rx[8][2] = { {2, 12}, {3, 13}, {4, 5}, {5, 4}, +static int8_t vsc3316_fsm1_rx[8][2] = { {2, 12}, {3, 13}, {4, 5}, {5, 4}, {10, 11}, {11, 10}, {12, 2}, {13, 3} }; -static const int8_t vsc3316_fsm2_rx[8][2] = { {0, 15}, {1, 14}, {6, 7}, {7, 6}, +static int8_t vsc3316_fsm2_rx[8][2] = { {0, 15}, {1, 14}, {6, 7}, {7, 6}, {8, 9}, {9, 8}, {14, 1}, {15, 0} }; int checkboard(void) @@ -43,12 +43,11 @@ int checkboard(void) char buf[64]; u8 sw; struct cpu_type *cpu = gd->arch.cpu; - ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; unsigned int i; printf("Board: %sQDS, ", cpu->name); printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, ", - QIXIS_READ(id), QIXIS_READ(arch)); + QIXIS_READ(id), QIXIS_READ(arch)); sw = QIXIS_READ(brdcfg[0]); sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT; @@ -63,24 +62,11 @@ int checkboard(void) printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH); printf("FPGA: v%d (%s), build %d", - (int)QIXIS_READ(scver), qixis_read_tag(buf), - (int)qixis_read_minor()); + (int)QIXIS_READ(scver), qixis_read_tag(buf), + (int)qixis_read_minor()); /* the timestamp string contains "\n" at the end */ printf(" on %s", qixis_read_time(buf)); - /* Display the RCW, so that no one gets confused as to what RCW - * we're actually using for this boot. - */ - puts("Reset Configuration Word (RCW):"); - for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) { - u32 rcw = in_be32(&gur->rcwsr[i]); - - if ((i % 4) == 0) - printf("\n %08x:", i * 4); - printf(" %08x", rcw); - } - puts("\n"); - /* * Display the actual SERDES reference clocks as configured by the * dip switches on the board. Note that the SWx registers could @@ -92,7 +78,7 @@ int checkboard(void) puts("SERDES Reference Clocks: "); sw = QIXIS_READ(brdcfg[2]); for (i = 0; i < MAX_SERDES; i++) { - static const char *freq[] = { + static const char * const freq[] = { "100", "125", "156.25", "161.1328125"}; unsigned int clock = (sw >> (6 - 2 * i)) & 3; @@ -367,25 +353,60 @@ int config_frontside_crossbar_vsc3316(void) srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) & FSL_CORENET2_RCWSR4_SRDS1_PRTCL; srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; - if (srds_prtcl_s1) { + switch (srds_prtcl_s1) { + case 38: + /* swap first lane and third lane on slot1 */ + vsc3316_fsm1_tx[0][1] = 14; + vsc3316_fsm1_tx[6][1] = 0; + vsc3316_fsm1_rx[1][1] = 2; + vsc3316_fsm1_rx[6][1] = 13; + case 40: + case 46: + case 48: + /* swap first lane and third lane on slot2 */ + vsc3316_fsm1_tx[2][1] = 8; + vsc3316_fsm1_tx[4][1] = 6; + vsc3316_fsm1_rx[2][1] = 10; + vsc3316_fsm1_rx[5][1] = 5; + default: ret = vsc3316_config(VSC3316_FSM_TX_ADDR, vsc3316_fsm1_tx, 8); if (ret) return ret; ret = vsc3316_config(VSC3316_FSM_RX_ADDR, vsc3316_fsm1_rx, 8); if (ret) return ret; + break; } srds_prtcl_s2 = in_be32(&gur->rcwsr[4]) & FSL_CORENET2_RCWSR4_SRDS2_PRTCL; srds_prtcl_s2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT; - if (srds_prtcl_s2) { + switch (srds_prtcl_s2) { + case 38: + /* swap first lane and third lane on slot3 */ + vsc3316_fsm2_tx[2][1] = 11; + vsc3316_fsm2_tx[5][1] = 4; + vsc3316_fsm2_rx[2][1] = 9; + vsc3316_fsm2_rx[4][1] = 7; + case 40: + case 46: + case 48: + case 50: + case 52: + case 54: + /* swap first lane and third lane on slot4 */ + vsc3316_fsm2_tx[6][1] = 3; + vsc3316_fsm2_tx[1][1] = 12; + vsc3316_fsm2_rx[0][1] = 1; + vsc3316_fsm2_rx[6][1] = 15; + default: ret = vsc3316_config(VSC3316_FSM_TX_ADDR, vsc3316_fsm2_tx, 8); if (ret) return ret; ret = vsc3316_config(VSC3316_FSM_RX_ADDR, vsc3316_fsm2_rx, 8); if (ret) return ret; + break; } return 0; @@ -430,7 +451,7 @@ int config_backside_crossbar_mux(void) break; default: printf("WARNING: unsupported for SerDes3 Protocol %d\n", - srds_prtcl_s3); + srds_prtcl_s3); return -1; } @@ -470,7 +491,7 @@ int config_backside_crossbar_mux(void) break; default: printf("WARNING: unsupported for SerDes4 Protocol %d\n", - srds_prtcl_s4); + srds_prtcl_s4); return -1; } @@ -495,8 +516,8 @@ int board_early_init_r(void) disable_tlb(flash_esel); set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, flash_esel, BOOKE_PAGESZ_256M, 1); + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, flash_esel, BOOKE_PAGESZ_256M, 1); set_liodns(); #ifdef CONFIG_SYS_DPAA_QBMAN @@ -634,9 +655,8 @@ int misc_init_r(void) u32 pllcr0 = srds_regs->bank[i].pllcr0; u32 expected = pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK; if (expected != actual[i]) { - printf("Warning: SERDES%u expects reference clock" - " %sMHz, but actual is %sMHz\n", i + 1, - serdes_clock_to_string(expected), + printf("Warning: SERDES%u expects reference clock %sMHz, but actual is %sMHz\n", + i + 1, serdes_clock_to_string(expected), serdes_clock_to_string(actual[i])); } } @@ -795,42 +815,44 @@ void qixis_dump_switch(void) } sw[0] = dutcfg[0]; - sw[1] = (dutcfg[1] << 0x07) | \ - ((dutcfg[12] & 0xC0) >> 1) | \ - ((dutcfg[11] & 0xE0) >> 3) | \ - ((dutcfg[6] & 0x80) >> 6) | \ + sw[1] = (dutcfg[1] << 0x07) | + ((dutcfg[12] & 0xC0) >> 1) | + ((dutcfg[11] & 0xE0) >> 3) | + ((dutcfg[6] & 0x80) >> 6) | ((dutcfg[1] & 0x80) >> 7); - sw[2] = ((brdcfg[1] & 0x0f) << 4) | \ - ((brdcfg[1] & 0x30) >> 2) | \ - ((brdcfg[1] & 0x40) >> 5) | \ + sw[2] = ((brdcfg[1] & 0x0f) << 4) | + ((brdcfg[1] & 0x30) >> 2) | + ((brdcfg[1] & 0x40) >> 5) | ((brdcfg[1] & 0x80) >> 7); sw[3] = brdcfg[2]; - sw[4] = ((dutcfg[2] & 0x01) << 7) | \ - ((dutcfg[2] & 0x06) << 4) | \ - ((~QIXIS_READ(present)) & 0x10) | \ - ((brdcfg[3] & 0x80) >> 4) | \ - ((brdcfg[3] & 0x01) << 2) | \ - ((brdcfg[6] == 0x62) ? 3 : \ - ((brdcfg[6] == 0x5a) ? 2 : \ + sw[4] = ((dutcfg[2] & 0x01) << 7) | + ((dutcfg[2] & 0x06) << 4) | + ((~QIXIS_READ(present)) & 0x10) | + ((brdcfg[3] & 0x80) >> 4) | + ((brdcfg[3] & 0x01) << 2) | + ((brdcfg[6] == 0x62) ? 3 : + ((brdcfg[6] == 0x5a) ? 2 : ((brdcfg[6] == 0x5e) ? 1 : 0))); - sw[5] = ((brdcfg[0] & 0x0f) << 4) | \ - ((QIXIS_READ(rst_ctl) & 0x30) >> 2) | \ + sw[5] = ((brdcfg[0] & 0x0f) << 4) | + ((QIXIS_READ(rst_ctl) & 0x30) >> 2) | ((brdcfg[0] & 0x40) >> 5); sw[6] = (brdcfg[11] & 0x20) | ((brdcfg[5] & 0x02) << 3); - sw[7] = (((~QIXIS_READ(rst_ctl)) & 0x40) << 1) | \ + sw[7] = (((~QIXIS_READ(rst_ctl)) & 0x40) << 1) | ((brdcfg[5] & 0x10) << 2); - sw[8] = ((brdcfg[12] & 0x08) << 4) | \ + sw[8] = ((brdcfg[12] & 0x08) << 4) | ((brdcfg[12] & 0x03) << 5); puts("DIP switch (reverse-engineering)\n"); for (i = 0; i < 9; i++) { printf("SW%d = 0b%s (0x%02x)\n", - i + 1, byte_to_binary_mask(sw[i], mask[i], buf), sw[i]); + i + 1, byte_to_binary_mask(sw[i], mask[i], buf), sw[i]); } } -static int do_vdd_adjust(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_vdd_adjust(cmd_tbl_t *cmdtp, + int flag, int argc, + char * const argv[]) { ulong override; diff --git a/board/freescale/t4qds/tlb.c b/board/freescale/t4qds/tlb.c index b27356a..b701e75 100644 --- a/board/freescale/t4qds/tlb.c +++ b/board/freescale/t4qds/tlb.c @@ -120,9 +120,11 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 16, BOOKE_PAGESZ_64K, 1), #endif +#ifdef QIXIS_BASE_PHYS SET_TLB_ENTRY(1, QIXIS_BASE, QIXIS_BASE_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 17, BOOKE_PAGESZ_4K, 1), +#endif #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE /* * SRIO_PCIE_BOOT-SLAVE. 1M space from 0xffe00000 for diff --git a/board/gdsys/405ep/405ep.c b/board/gdsys/405ep/405ep.c index f0df2e3..426dc05 100644 --- a/board/gdsys/405ep/405ep.c +++ b/board/gdsys/405ep/405ep.c @@ -18,6 +18,12 @@ #define REFLECTION_TESTPATTERN 0xdede #define REFLECTION_TESTPATTERN_INV (~REFLECTION_TESTPATTERN & 0xffff) +#ifdef CONFIG_SYS_FPGA_NO_RFL_HI +#define REFLECTION_TESTREG reflection_low +#else +#define REFLECTION_TESTREG reflection_high +#endif + DECLARE_GLOBAL_DATA_PTR; int get_fpga_state(unsigned dev) @@ -90,23 +96,17 @@ int board_early_init_r(void) gd405ep_set_fpga_reset(0); for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k) { - struct ihs_fpga *fpga = - (struct ihs_fpga *)CONFIG_SYS_FPGA_BASE(k); -#ifdef CONFIG_SYS_FPGA_NO_RFL_HI - u16 *reflection_target = &fpga->reflection_low; -#else - u16 *reflection_target = &fpga->reflection_high; -#endif /* * wait for fpga out of reset */ ctr = 0; while (1) { - out_le16(&fpga->reflection_low, - REFLECTION_TESTPATTERN); + u16 val; + + FPGA_SET_REG(k, reflection_low, REFLECTION_TESTPATTERN); - if (in_le16(reflection_target) == - REFLECTION_TESTPATTERN_INV) + FPGA_GET_REG(k, REFLECTION_TESTREG, &val); + if (val == REFLECTION_TESTPATTERN_INV) break; udelay(100000); diff --git a/board/gdsys/405ep/dlvision-10g.c b/board/gdsys/405ep/dlvision-10g.c index 48d8786..35dfbbc 100644 --- a/board/gdsys/405ep/dlvision-10g.c +++ b/board/gdsys/405ep/dlvision-10g.c @@ -55,6 +55,8 @@ enum { RAM_DDR2_64 = 2, }; +struct ihs_fpga *fpga_ptr[] = CONFIG_SYS_FPGA_PTR; + int misc_init_r(void) { /* startup fans */ @@ -79,10 +81,9 @@ static unsigned int get_mc2_present(void) static void print_fpga_info(unsigned dev) { - struct ihs_fpga *fpga = (struct ihs_fpga *) CONFIG_SYS_FPGA_BASE(dev); - u16 versions = in_le16(&fpga->versions); - u16 fpga_version = in_le16(&fpga->fpga_version); - u16 fpga_features = in_le16(&fpga->fpga_features); + u16 versions; + u16 fpga_version; + u16 fpga_features; unsigned unit_type; unsigned hardware_version; unsigned feature_rs232; @@ -96,6 +97,10 @@ static void print_fpga_info(unsigned dev) printf("FPGA%d: ", dev); + FPGA_GET_REG(dev, versions, &versions); + FPGA_GET_REG(dev, fpga_version, &fpga_version); + FPGA_GET_REG(dev, fpga_features, &fpga_features); + hardware_version = versions & 0x000f; if (fpga_state @@ -247,8 +252,9 @@ int checkboard(void) int last_stage_init(void) { - struct ihs_fpga *fpga = (struct ihs_fpga *) CONFIG_SYS_FPGA_BASE(0); - u16 versions = in_le16(&fpga->versions); + u16 versions; + + FPGA_GET_REG(0, versions, &versions); print_fpga_info(0); if (get_mc2_present()) diff --git a/board/gdsys/405ep/io.c b/board/gdsys/405ep/io.c index eee9ba0..03d796c 100644 --- a/board/gdsys/405ep/io.c +++ b/board/gdsys/405ep/io.c @@ -37,6 +37,8 @@ enum { HWVER_122 = 3, }; +struct ihs_fpga *fpga_ptr[] = CONFIG_SYS_FPGA_PTR; + int misc_init_r(void) { /* startup fans */ @@ -101,15 +103,18 @@ int checkboard(void) static void print_fpga_info(void) { - struct ihs_fpga *fpga = (struct ihs_fpga *) CONFIG_SYS_FPGA_BASE(0); - u16 versions = in_le16(&fpga->versions); - u16 fpga_version = in_le16(&fpga->fpga_version); - u16 fpga_features = in_le16(&fpga->fpga_features); + u16 versions; + u16 fpga_version; + u16 fpga_features; unsigned unit_type; unsigned hardware_version; unsigned feature_channels; unsigned feature_expansion; + FPGA_GET_REG(0, versions, &versions); + FPGA_GET_REG(0, fpga_version, &fpga_version); + FPGA_GET_REG(0, fpga_features, &fpga_features); + unit_type = (versions & 0xf000) >> 12; hardware_version = versions & 0x000f; feature_channels = fpga_features & 0x007f; @@ -163,7 +168,6 @@ static void print_fpga_info(void) */ int last_stage_init(void) { - struct ihs_fpga *fpga = (struct ihs_fpga *) CONFIG_SYS_FPGA_BASE(0); unsigned int k; print_fpga_info(); @@ -175,7 +179,7 @@ int last_stage_init(void) configure_gbit_phy(k); /* take fpga serdes blocks out of reset */ - out_le16(&fpga->quad_serdes_reset, 0); + FPGA_SET_REG(0, quad_serdes_reset, 0); return 0; } diff --git a/board/gdsys/405ep/iocon.c b/board/gdsys/405ep/iocon.c index c728bc7..7a98e41 100644 --- a/board/gdsys/405ep/iocon.c +++ b/board/gdsys/405ep/iocon.c @@ -7,6 +7,7 @@ #include <common.h> #include <command.h> +#include <errno.h> #include <asm/processor.h> #include <asm/io.h> #include <asm/ppc4xx-gpio.h> @@ -15,11 +16,22 @@ #include <gdsys_fpga.h> #include "../common/osd.h" +#include "../common/mclink.h" + +#include <i2c.h> +#include <pca953x.h> +#include <pca9698.h> + +#include <miiphy.h> + +DECLARE_GLOBAL_DATA_PTR; #define LATCH0_BASE (CONFIG_SYS_LATCH_BASE) #define LATCH1_BASE (CONFIG_SYS_LATCH_BASE + 0x100) #define LATCH2_BASE (CONFIG_SYS_LATCH_BASE + 0x200) +#define MAX_MUX_CHANNELS 2 + enum { UNITTYPE_MAIN_SERVER = 0, UNITTYPE_MAIN_USER = 1, @@ -31,11 +43,22 @@ enum { HWVER_100 = 0, HWVER_104 = 1, HWVER_110 = 2, + HWVER_120 = 3, + HWVER_200 = 4, + HWVER_210 = 5, + HWVER_220 = 6, + HWVER_230 = 7, +}; + +enum { + FPGA_HWVER_200 = 0, + FPGA_HWVER_210 = 1, }; enum { COMPRESSION_NONE = 0, - COMPRESSION_TYPE1_DELTA, + COMPRESSION_TYPE1_DELTA = 1, + COMPRESSION_TYPE1_TYPE2_DELTA = 3, }; enum { @@ -51,8 +74,75 @@ enum { enum { RAM_DDR2_32 = 0, + RAM_DDR3_32 = 1, }; +enum { + CARRIER_SPEED_1G = 0, + CARRIER_SPEED_2_5G = 1, +}; + +enum { + MCFPGA_DONE = 1 << 0, + MCFPGA_INIT_N = 1 << 1, + MCFPGA_PROGRAM_N = 1 << 2, + MCFPGA_UPDATE_ENABLE_N = 1 << 3, + MCFPGA_RESET_N = 1 << 4, +}; + +enum { + GPIO_MDC = 1 << 14, + GPIO_MDIO = 1 << 15, +}; + +unsigned int mclink_fpgacount; +struct ihs_fpga *fpga_ptr[] = CONFIG_SYS_FPGA_PTR; + +static int setup_88e1518(const char *bus, unsigned char addr); + +int fpga_set_reg(u32 fpga, u16 *reg, off_t regoff, u16 data) +{ + int res; + + switch (fpga) { + case 0: + out_le16(reg, data); + break; + default: + res = mclink_send(fpga - 1, regoff, data); + if (res < 0) { + printf("mclink_send reg %02lx data %04x returned %d\n", + regoff, data, res); + return res; + } + break; + } + + return 0; +} + +int fpga_get_reg(u32 fpga, u16 *reg, off_t regoff, u16 *data) +{ + int res; + + switch (fpga) { + case 0: + *data = in_le16(reg); + break; + default: + if (fpga > mclink_fpgacount) + return -EINVAL; + res = mclink_receive(fpga - 1, regoff, data); + if (res < 0) { + printf("mclink_receive reg %02lx returned %d\n", + regoff, res); + return res; + } + } + + return 0; +} + /* * Check Board Identity: */ @@ -74,12 +164,11 @@ int checkboard(void) return 0; } -static void print_fpga_info(void) +static void print_fpga_info(unsigned int fpga, bool rgmii2_present) { - struct ihs_fpga *fpga = (struct ihs_fpga *) CONFIG_SYS_FPGA_BASE(0); - u16 versions = in_le16(&fpga->versions); - u16 fpga_version = in_le16(&fpga->fpga_version); - u16 fpga_features = in_le16(&fpga->fpga_features); + u16 versions; + u16 fpga_version; + u16 fpga_features; unsigned unit_type; unsigned hardware_version; unsigned feature_compression; @@ -87,19 +176,29 @@ static void print_fpga_info(void) unsigned feature_audio; unsigned feature_sysclock; unsigned feature_ramconfig; + unsigned feature_carrier_speed; unsigned feature_carriers; unsigned feature_video_channels; + int legacy = get_fpga_state(0) & FPGA_STATE_PLATFORM; + + FPGA_GET_REG(0, versions, &versions); + FPGA_GET_REG(0, fpga_version, &fpga_version); + FPGA_GET_REG(0, fpga_features, &fpga_features); + unit_type = (versions & 0xf000) >> 12; - hardware_version = versions & 0x000f; feature_compression = (fpga_features & 0xe000) >> 13; feature_osd = fpga_features & (1<<11); feature_audio = (fpga_features & 0x0600) >> 9; feature_sysclock = (fpga_features & 0x0180) >> 7; feature_ramconfig = (fpga_features & 0x0060) >> 5; + feature_carrier_speed = fpga_features & (1<<4); feature_carriers = (fpga_features & 0x000c) >> 2; feature_video_channels = fpga_features & 0x0003; + if (legacy) + printf("legacy "); + switch (unit_type) { case UNITTYPE_MAIN_USER: printf("Mainchannel"); @@ -114,27 +213,78 @@ static void print_fpga_info(void) break; } - switch (hardware_version) { - case HWVER_100: - printf(" HW-Ver 1.00\n"); - break; - - case HWVER_104: - printf(" HW-Ver 1.04\n"); - break; - - case HWVER_110: - printf(" HW-Ver 1.10\n"); - break; + if (unit_type == UNITTYPE_MAIN_USER) { + if (legacy) + hardware_version = + (in_le16((void *)LATCH2_BASE)>>8) & 0x0f; + else + hardware_version = + (!!pca9698_get_value(0x20, 24) << 0) + | (!!pca9698_get_value(0x20, 25) << 1) + | (!!pca9698_get_value(0x20, 26) << 2) + | (!!pca9698_get_value(0x20, 27) << 3); + switch (hardware_version) { + case HWVER_100: + printf(" HW-Ver 1.00,"); + break; + + case HWVER_104: + printf(" HW-Ver 1.04,"); + break; + + case HWVER_110: + printf(" HW-Ver 1.10,"); + break; + + case HWVER_120: + printf(" HW-Ver 1.20-1.21,"); + break; + + case HWVER_200: + printf(" HW-Ver 2.00,"); + break; + + case HWVER_210: + printf(" HW-Ver 2.10,"); + break; + + case HWVER_220: + printf(" HW-Ver 2.20,"); + break; + + case HWVER_230: + printf(" HW-Ver 2.30,"); + break; + + default: + printf(" HW-Ver %d(not supported),", + hardware_version); + break; + } + if (rgmii2_present) + printf(" RGMII2,"); + } - default: - printf(" HW-Ver %d(not supported)\n", - hardware_version); - break; + if (unit_type == UNITTYPE_VIDEO_USER) { + hardware_version = versions & 0x000f; + switch (hardware_version) { + case FPGA_HWVER_200: + printf(" HW-Ver 2.00,"); + break; + + case FPGA_HWVER_210: + printf(" HW-Ver 2.10,"); + break; + + default: + printf(" HW-Ver %d(not supported),", + hardware_version); + break; + } } - printf(" FPGA V %d.%02d, features:", - fpga_version / 100, fpga_version % 100); + printf(" FPGA V %d.%02d\n features:", + fpga_version / 100, fpga_version % 100); switch (feature_compression) { @@ -146,6 +296,10 @@ static void print_fpga_info(void) printf(" type1-deltacompression"); break; + case COMPRESSION_TYPE1_TYPE2_DELTA: + printf(" type1-deltacompression, type2-inlinecompression"); + break; + default: printf(" compression %d(not supported)", feature_compression); break; @@ -192,53 +346,145 @@ static void print_fpga_info(void) printf(", RAM 32 bit DDR2"); break; + case RAM_DDR3_32: + printf(", RAM 32 bit DDR3"); + break; + default: printf(", RAM %d(not supported)", feature_ramconfig); break; } - printf(", %d carrier(s)", feature_carriers); + printf(", %d carrier(s) %s", feature_carriers, + feature_carrier_speed ? "2.5Gbit/s" : "1Gbit/s"); printf(", %d video channel(s)\n", feature_video_channels); } int last_stage_init(void) { - print_fpga_info(); + int slaves; + unsigned int k; + unsigned int mux_ch; + unsigned char mclink_controllers[] = { 0x24, 0x25, 0x26 }; + int legacy = get_fpga_state(0) & FPGA_STATE_PLATFORM; + u16 fpga_features; + int feature_carrier_speed = fpga_features & (1<<4); + bool ch0_rgmii2_present = false; + + FPGA_GET_REG(0, fpga_features, &fpga_features); + + if (!legacy) + ch0_rgmii2_present = !pca9698_get_value(0x20, 30); + + print_fpga_info(0, ch0_rgmii2_present); + osd_probe(0); + + /* wait for FPGA done */ + for (k = 0; k < ARRAY_SIZE(mclink_controllers); ++k) { + unsigned int ctr = 0; + + if (i2c_probe(mclink_controllers[k])) + continue; + + while (!(pca953x_get_val(mclink_controllers[k]) + & MCFPGA_DONE)) { + udelay(100000); + if (ctr++ > 5) { + printf("no done for mclink_controller %d\n", k); + break; + } + } + } + + if (!legacy && (feature_carrier_speed == CARRIER_SPEED_1G)) { + miiphy_register(bb_miiphy_buses[0].name, bb_miiphy_read, + bb_miiphy_write); + for (mux_ch = 0; mux_ch < MAX_MUX_CHANNELS; ++mux_ch) { + if ((mux_ch == 1) && !ch0_rgmii2_present) + continue; + + setup_88e1518(bb_miiphy_buses[0].name, mux_ch); + } + } + + /* wait for slave-PLLs to be up and running */ + udelay(500000); + + mclink_fpgacount = CONFIG_SYS_MCLINK_MAX; + slaves = mclink_probe(); + mclink_fpgacount = 0; + + if (slaves <= 0) + return 0; + + mclink_fpgacount = slaves; + + for (k = 1; k <= slaves; ++k) { + FPGA_GET_REG(k, fpga_features, &fpga_features); + feature_carrier_speed = fpga_features & (1<<4); + + print_fpga_info(k, false); + osd_probe(k); + if (feature_carrier_speed == CARRIER_SPEED_1G) { + miiphy_register(bb_miiphy_buses[k].name, + bb_miiphy_read, bb_miiphy_write); + setup_88e1518(bb_miiphy_buses[k].name, 0); + } + } - return osd_probe(0); + return 0; } /* * provide access to fpga gpios (for I2C bitbang) + * (these may look all too simple but make iocon.h much more readable) */ -void fpga_gpio_set(int pin) +void fpga_gpio_set(unsigned int bus, int pin) { - out_le16((void *)(CONFIG_SYS_FPGA0_BASE + 0x18), pin); + FPGA_SET_REG(bus, gpio.set, pin); } -void fpga_gpio_clear(int pin) +void fpga_gpio_clear(unsigned int bus, int pin) { - out_le16((void *)(CONFIG_SYS_FPGA0_BASE + 0x16), pin); + FPGA_SET_REG(bus, gpio.clear, pin); } -int fpga_gpio_get(int pin) +int fpga_gpio_get(unsigned int bus, int pin) { - return in_le16((void *)(CONFIG_SYS_FPGA0_BASE + 0x14)) & pin; + u16 val; + + FPGA_GET_REG(bus, gpio.read, &val); + + return val & pin; } void gd405ep_init(void) { + unsigned int k; + + if (i2c_probe(0x20)) { /* i2c_probe returns 0 on success */ + for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k) + gd->arch.fpga_state[k] |= FPGA_STATE_PLATFORM; + } else { + pca9698_direction_output(0x20, 4, 1); + } } void gd405ep_set_fpga_reset(unsigned state) { - if (state) { - out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_RESET); - out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_RESET); + int legacy = get_fpga_state(0) & FPGA_STATE_PLATFORM; + + if (legacy) { + if (state) { + out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_RESET); + out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_RESET); + } else { + out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_BOOT); + out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_BOOT); + } } else { - out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_BOOT); - out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_BOOT); + pca9698_set_value(0x20, 4, state ? 0 : 1); } } @@ -253,5 +499,333 @@ void gd405ep_setup_hw(void) int gd405ep_get_fpga_done(unsigned fpga) { - return in_le16((void *)LATCH2_BASE) & CONFIG_SYS_FPGA_DONE(fpga); + int legacy = get_fpga_state(0) & FPGA_STATE_PLATFORM; + + if (legacy) + return in_le16((void *)LATCH2_BASE) + & CONFIG_SYS_FPGA_DONE(fpga); + else + return pca9698_get_value(0x20, 20); +} + +/* + * FPGA MII bitbang implementation + */ + +struct fpga_mii { + unsigned fpga; + int mdio; +} fpga_mii[] = { + { 0, 1}, + { 1, 1}, + { 2, 1}, + { 3, 1}, +}; + +static int mii_dummy_init(struct bb_miiphy_bus *bus) +{ + return 0; +} + +static int mii_mdio_active(struct bb_miiphy_bus *bus) +{ + struct fpga_mii *fpga_mii = bus->priv; + + if (fpga_mii->mdio) + FPGA_SET_REG(fpga_mii->fpga, gpio.set, GPIO_MDIO); + else + FPGA_SET_REG(fpga_mii->fpga, gpio.clear, GPIO_MDIO); + + return 0; +} + +static int mii_mdio_tristate(struct bb_miiphy_bus *bus) +{ + struct fpga_mii *fpga_mii = bus->priv; + + FPGA_SET_REG(fpga_mii->fpga, gpio.set, GPIO_MDIO); + + return 0; +} + +static int mii_set_mdio(struct bb_miiphy_bus *bus, int v) +{ + struct fpga_mii *fpga_mii = bus->priv; + + if (v) + FPGA_SET_REG(fpga_mii->fpga, gpio.set, GPIO_MDIO); + else + FPGA_SET_REG(fpga_mii->fpga, gpio.clear, GPIO_MDIO); + + fpga_mii->mdio = v; + + return 0; +} + +static int mii_get_mdio(struct bb_miiphy_bus *bus, int *v) +{ + u16 gpio; + struct fpga_mii *fpga_mii = bus->priv; + + FPGA_GET_REG(fpga_mii->fpga, gpio.read, &gpio); + + *v = ((gpio & GPIO_MDIO) != 0); + + return 0; +} + +static int mii_set_mdc(struct bb_miiphy_bus *bus, int v) +{ + struct fpga_mii *fpga_mii = bus->priv; + + if (v) + FPGA_SET_REG(fpga_mii->fpga, gpio.set, GPIO_MDC); + else + FPGA_SET_REG(fpga_mii->fpga, gpio.clear, GPIO_MDC); + + return 0; +} + +static int mii_delay(struct bb_miiphy_bus *bus) +{ + udelay(1); + + return 0; +} + +struct bb_miiphy_bus bb_miiphy_buses[] = { + { + .name = "board0", + .init = mii_dummy_init, + .mdio_active = mii_mdio_active, + .mdio_tristate = mii_mdio_tristate, + .set_mdio = mii_set_mdio, + .get_mdio = mii_get_mdio, + .set_mdc = mii_set_mdc, + .delay = mii_delay, + .priv = &fpga_mii[0], + }, + { + .name = "board1", + .init = mii_dummy_init, + .mdio_active = mii_mdio_active, + .mdio_tristate = mii_mdio_tristate, + .set_mdio = mii_set_mdio, + .get_mdio = mii_get_mdio, + .set_mdc = mii_set_mdc, + .delay = mii_delay, + .priv = &fpga_mii[1], + }, + { + .name = "board2", + .init = mii_dummy_init, + .mdio_active = mii_mdio_active, + .mdio_tristate = mii_mdio_tristate, + .set_mdio = mii_set_mdio, + .get_mdio = mii_get_mdio, + .set_mdc = mii_set_mdc, + .delay = mii_delay, + .priv = &fpga_mii[2], + }, + { + .name = "board3", + .init = mii_dummy_init, + .mdio_active = mii_mdio_active, + .mdio_tristate = mii_mdio_tristate, + .set_mdio = mii_set_mdio, + .get_mdio = mii_get_mdio, + .set_mdc = mii_set_mdc, + .delay = mii_delay, + .priv = &fpga_mii[3], + }, +}; + +int bb_miiphy_buses_num = sizeof(bb_miiphy_buses) / + sizeof(bb_miiphy_buses[0]); + +enum { + MIICMD_SET, + MIICMD_MODIFY, + MIICMD_VERIFY_VALUE, + MIICMD_WAIT_FOR_VALUE, +}; + +struct mii_setupcmd { + u8 token; + u8 reg; + u16 data; + u16 mask; + u32 timeout; +}; + +/* + * verify we are talking to a 88e1518 + */ +struct mii_setupcmd verify_88e1518[] = { + { MIICMD_SET, 22, 0x0000 }, + { MIICMD_VERIFY_VALUE, 2, 0x0141, 0xffff }, + { MIICMD_VERIFY_VALUE, 3, 0x0dd0, 0xfff0 }, +}; + +/* + * workaround for erratum mentioned in 88E1518 release notes + */ +struct mii_setupcmd fixup_88e1518[] = { + { MIICMD_SET, 22, 0x00ff }, + { MIICMD_SET, 17, 0x214b }, + { MIICMD_SET, 16, 0x2144 }, + { MIICMD_SET, 17, 0x0c28 }, + { MIICMD_SET, 16, 0x2146 }, + { MIICMD_SET, 17, 0xb233 }, + { MIICMD_SET, 16, 0x214d }, + { MIICMD_SET, 17, 0xcc0c }, + { MIICMD_SET, 16, 0x2159 }, + { MIICMD_SET, 22, 0x00fb }, + { MIICMD_SET, 7, 0xc00d }, + { MIICMD_SET, 22, 0x0000 }, +}; + +/* + * default initialization: + * - set RGMII receive timing to "receive clock transition when data stable" + * - set RGMII transmit timing to "transmit clock internally delayed" + * - set RGMII output impedance target to 78,8 Ohm + * - run output impedance calibration + * - set autonegotiation advertise to 1000FD only + */ +struct mii_setupcmd default_88e1518[] = { + { MIICMD_SET, 22, 0x0002 }, + { MIICMD_MODIFY, 21, 0x0030, 0x0030 }, + { MIICMD_MODIFY, 25, 0x0000, 0x0003 }, + { MIICMD_MODIFY, 24, 0x8000, 0x8000 }, + { MIICMD_WAIT_FOR_VALUE, 24, 0x4000, 0x4000, 2000 }, + { MIICMD_SET, 22, 0x0000 }, + { MIICMD_MODIFY, 4, 0x0000, 0x01e0 }, + { MIICMD_MODIFY, 9, 0x0200, 0x0300 }, +}; + +/* + * turn off CLK125 for PHY daughterboard + */ +struct mii_setupcmd ch1fix_88e1518[] = { + { MIICMD_SET, 22, 0x0002 }, + { MIICMD_MODIFY, 16, 0x0006, 0x0006 }, + { MIICMD_SET, 22, 0x0000 }, +}; + +/* + * perform copper software reset + */ +struct mii_setupcmd swreset_88e1518[] = { + { MIICMD_SET, 22, 0x0000 }, + { MIICMD_MODIFY, 0, 0x8000, 0x8000 }, + { MIICMD_WAIT_FOR_VALUE, 0, 0x0000, 0x8000, 2000 }, +}; + +static int process_setupcmd(const char *bus, unsigned char addr, + struct mii_setupcmd *setupcmd) +{ + int res; + u8 reg = setupcmd->reg; + u16 data = setupcmd->data; + u16 mask = setupcmd->mask; + u32 timeout = setupcmd->timeout; + u16 orig_data; + unsigned long start; + + debug("mii %s:%u reg %2u ", bus, addr, reg); + + switch (setupcmd->token) { + case MIICMD_MODIFY: + res = miiphy_read(bus, addr, reg, &orig_data); + if (res) + break; + debug("is %04x. (value %04x mask %04x) ", orig_data, data, + mask); + data = (orig_data & ~mask) | (data & mask); + case MIICMD_SET: + debug("=> %04x\n", data); + res = miiphy_write(bus, addr, reg, data); + break; + case MIICMD_VERIFY_VALUE: + res = miiphy_read(bus, addr, reg, &orig_data); + if (res) + break; + if ((orig_data & mask) != (data & mask)) + res = -1; + debug("(value %04x mask %04x) == %04x? %s\n", data, mask, + orig_data, res ? "FAIL" : "PASS"); + break; + case MIICMD_WAIT_FOR_VALUE: + res = -1; + start = get_timer(0); + while ((res != 0) && (get_timer(start) < timeout)) { + res = miiphy_read(bus, addr, reg, &orig_data); + if (res) + continue; + if ((orig_data & mask) != (data & mask)) + res = -1; + } + debug("(value %04x mask %04x) == %04x? %s after %lu ms\n", data, + mask, orig_data, res ? "FAIL" : "PASS", + get_timer(start)); + break; + default: + res = -1; + break; + } + + return res; +} + +static int process_setup(const char *bus, unsigned char addr, + struct mii_setupcmd *setupcmd, unsigned int count) +{ + int res = 0; + unsigned int k; + + for (k = 0; k < count; ++k) { + res = process_setupcmd(bus, addr, &setupcmd[k]); + if (res) { + printf("mii cmd %u on bus %s addr %u failed, aborting setup", + setupcmd[k].token, bus, addr); + break; + } + } + + return res; +} + +static int setup_88e1518(const char *bus, unsigned char addr) +{ + int res; + + res = process_setup(bus, addr, + verify_88e1518, ARRAY_SIZE(verify_88e1518)); + if (res) + return res; + + res = process_setup(bus, addr, + fixup_88e1518, ARRAY_SIZE(fixup_88e1518)); + if (res) + return res; + + res = process_setup(bus, addr, + default_88e1518, ARRAY_SIZE(default_88e1518)); + if (res) + return res; + + if (addr) { + res = process_setup(bus, addr, + ch1fix_88e1518, ARRAY_SIZE(ch1fix_88e1518)); + if (res) + return res; + } + + res = process_setup(bus, addr, + swreset_88e1518, ARRAY_SIZE(swreset_88e1518)); + if (res) + return res; + + return 0; } diff --git a/board/gdsys/405ep/neo.c b/board/gdsys/405ep/neo.c index bca7803..ff0edb2 100644 --- a/board/gdsys/405ep/neo.c +++ b/board/gdsys/405ep/neo.c @@ -28,6 +28,8 @@ enum { HWVER_300 = 3, }; +struct ihs_fpga *fpga_ptr[] = CONFIG_SYS_FPGA_PTR; + int misc_init_r(void) { /* startup fans */ @@ -54,10 +56,9 @@ int checkboard(void) static void print_fpga_info(void) { - struct ihs_fpga *fpga = (struct ihs_fpga *) CONFIG_SYS_FPGA_BASE(0); - u16 versions = in_le16(&fpga->versions); - u16 fpga_version = in_le16(&fpga->fpga_version); - u16 fpga_features = in_le16(&fpga->fpga_features); + u16 versions; + u16 fpga_version; + u16 fpga_features; int fpga_state = get_fpga_state(0); unsigned unit_type; unsigned hardware_version; @@ -74,6 +75,10 @@ static void print_fpga_info(void) return; } + FPGA_GET_REG(0, versions, &versions); + FPGA_GET_REG(0, fpga_version, &fpga_version); + FPGA_GET_REG(0, fpga_features, &fpga_features); + unit_type = (versions & 0xf000) >> 12; hardware_version = versions & 0x000f; feature_channels = fpga_features & 0x007f; diff --git a/board/gdsys/405ex/405ex.c b/board/gdsys/405ex/405ex.c index 32e24c0..c1a583f 100644 --- a/board/gdsys/405ex/405ex.c +++ b/board/gdsys/405ex/405ex.c @@ -11,6 +11,12 @@ #define REFLECTION_TESTPATTERN 0xdede #define REFLECTION_TESTPATTERN_INV (~REFLECTION_TESTPATTERN & 0xffff) +#ifdef CONFIG_SYS_FPGA_NO_RFL_HI +#define REFLECTION_TESTREG reflection_low +#else +#define REFLECTION_TESTREG reflection_high +#endif + DECLARE_GLOBAL_DATA_PTR; int get_fpga_state(unsigned dev) @@ -220,23 +226,17 @@ int board_early_init_r(void) gd405ex_set_fpga_reset(0); for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k) { - struct ihs_fpga *fpga = - (struct ihs_fpga *)CONFIG_SYS_FPGA_BASE(k); -#ifdef CONFIG_SYS_FPGA_NO_RFL_HI - u16 *reflection_target = &fpga->reflection_low; -#else - u16 *reflection_target = &fpga->reflection_high; -#endif /* * wait for fpga out of reset */ ctr = 0; while (1) { - out_le16(&fpga->reflection_low, - REFLECTION_TESTPATTERN); + u16 val; + + FPGA_SET_REG(k, reflection_low, REFLECTION_TESTPATTERN); - if (in_le16(reflection_target) == - REFLECTION_TESTPATTERN_INV) + FPGA_GET_REG(k, REFLECTION_TESTREG, &val); + if (val == REFLECTION_TESTPATTERN_INV) break; udelay(100000); diff --git a/board/gdsys/405ex/io64.c b/board/gdsys/405ex/io64.c index fa8961a..2f8e306 100644 --- a/board/gdsys/405ex/io64.c +++ b/board/gdsys/405ex/io64.c @@ -51,6 +51,8 @@ enum { HWVER_110 = 1, }; +struct ihs_fpga *fpga_ptr[] = CONFIG_SYS_FPGA_PTR; + static inline void blank_string(int size) { int i; @@ -84,10 +86,9 @@ int misc_init_r(void) static void print_fpga_info(unsigned dev) { - struct ihs_fpga *fpga = (struct ihs_fpga *) CONFIG_SYS_FPGA_BASE(dev); - u16 versions = in_le16(&fpga->versions); - u16 fpga_version = in_le16(&fpga->fpga_version); - u16 fpga_features = in_le16(&fpga->fpga_features); + u16 versions; + u16 fpga_version; + u16 fpga_features; int fpga_state = get_fpga_state(dev); unsigned unit_type; @@ -95,6 +96,10 @@ static void print_fpga_info(unsigned dev) unsigned feature_channels; unsigned feature_expansion; + FPGA_GET_REG(dev, versions, &versions); + FPGA_GET_REG(dev, fpga_version, &fpga_version); + FPGA_GET_REG(dev, fpga_features, &fpga_features); + printf("FPGA%d: ", dev); if (fpga_state & FPGA_STATE_PLATFORM) printf("(legacy) "); @@ -226,8 +231,6 @@ int last_stage_init(void) { unsigned int k; unsigned int fpga; - struct ihs_fpga *fpga0 = (struct ihs_fpga *) CONFIG_SYS_FPGA_BASE(0); - struct ihs_fpga *fpga1 = (struct ihs_fpga *) CONFIG_SYS_FPGA_BASE(1); int failed = 0; char str_phys[] = "Setup PHYs -"; char str_serdes[] = "Start SERDES blocks"; @@ -265,17 +268,16 @@ int last_stage_init(void) /* take fpga serdes blocks out of reset */ puts(str_serdes); udelay(500000); - out_le16(&fpga0->quad_serdes_reset, 0); - out_le16(&fpga1->quad_serdes_reset, 0); + FPGA_SET_REG(0, quad_serdes_reset, 0); + FPGA_SET_REG(1, quad_serdes_reset, 0); blank_string(strlen(str_serdes)); /* take channels out of reset */ puts(str_channels); udelay(500000); for (fpga = 0; fpga < 2; ++fpga) { - u16 *ch0_config_int = &(fpga ? fpga1 : fpga0)->ch0_config_int; for (k = 0; k < 32; ++k) - out_le16(ch0_config_int + 4 * k, 0); + FPGA_SET_REG(fpga, ch[k].config_int, 0); } blank_string(strlen(str_channels)); @@ -283,16 +285,16 @@ int last_stage_init(void) puts(str_locks); udelay(500000); for (fpga = 0; fpga < 2; ++fpga) { - u16 *ch0_status_int = &(fpga ? fpga1 : fpga0)->ch0_status_int; for (k = 0; k < 32; ++k) { - u16 status = in_le16(ch0_status_int + 4*k); + u16 status; + FPGA_GET_REG(k, ch[k].status_int, &status); if (!(status & (1 << 4))) { failed = 1; printf("fpga %d channel %d: no serdes lock\n", fpga, k); } /* reset events */ - out_le16(ch0_status_int + 4*k, status); + FPGA_SET_REG(fpga, ch[k].status_int, 0); } } blank_string(strlen(str_locks)); @@ -300,14 +302,14 @@ int last_stage_init(void) /* verify hicb_status */ puts(str_hicb); for (fpga = 0; fpga < 2; ++fpga) { - u16 *ch0_hicb_status_int = &(fpga ? fpga1 : fpga0)->ch0_hicb_status_int; for (k = 0; k < 32; ++k) { - u16 status = in_le16(ch0_hicb_status_int + 4*k); + u16 status; + FPGA_GET_REG(k, hicb_ch[k].status_int, &status); if (status) printf("fpga %d hicb %d: hicb status %04x\n", fpga, k, status); /* reset events */ - out_le16(ch0_hicb_status_int + 4*k, status); + FPGA_SET_REG(fpga, hicb_ch[k].status_int, 0); } } blank_string(strlen(str_hicb)); diff --git a/board/gdsys/common/Makefile b/board/gdsys/common/Makefile index 43e6a4c..216ad96 100644 --- a/board/gdsys/common/Makefile +++ b/board/gdsys/common/Makefile @@ -13,9 +13,11 @@ endif LIB = $(obj)lib$(VENDOR).o +COBJS-$(CONFIG_SYS_FPGA_COMMON) += fpga.o + COBJS-$(CONFIG_IO) += miiphybb.o COBJS-$(CONFIG_IO64) += miiphybb.o -COBJS-$(CONFIG_IOCON) += osd.o +COBJS-$(CONFIG_IOCON) += osd.o mclink.o COBJS-$(CONFIG_DLVISION_10G) += osd.o COBJS-$(CONFIG_CONTROLCENTERD) += dp501.o diff --git a/board/gdsys/common/dp501.c b/board/gdsys/common/dp501.c index 9aa4e3f..52f3ea1 100644 --- a/board/gdsys/common/dp501.c +++ b/board/gdsys/common/dp501.c @@ -2,23 +2,7 @@ * (C) Copyright 2012 * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ /* Parade Technologies Inc. DP501 DisplayPort DVI/HDMI Transmitter */ diff --git a/board/gdsys/common/fpga.c b/board/gdsys/common/fpga.c new file mode 100644 index 0000000..e10c105 --- /dev/null +++ b/board/gdsys/common/fpga.c @@ -0,0 +1,25 @@ +/* + * (C) Copyright 2013 + * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <gdsys_fpga.h> + +#include <asm/io.h> + +int fpga_set_reg(u32 fpga, u16 *reg, off_t regoff, u16 data) +{ + out_le16(reg, data); + + return 0; +} + +int fpga_get_reg(u32 fpga, u16 *reg, off_t regoff, u16 *data) +{ + *data = in_le16(reg); + + return 0; +} diff --git a/board/gdsys/common/mclink.c b/board/gdsys/common/mclink.c new file mode 100644 index 0000000..9f230c9 --- /dev/null +++ b/board/gdsys/common/mclink.c @@ -0,0 +1,137 @@ +/* + * (C) Copyright 2012 + * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <errno.h> + +#include <gdsys_fpga.h> + +enum { + MCINT_SLAVE_LINK_CHANGED_EV = 1 << 7, + MCINT_TX_ERROR_EV = 1 << 9, + MCINT_TX_BUFFER_FREE = 1 << 10, + MCINT_TX_PACKET_TRANSMITTED_EV = 1 << 11, + MCINT_RX_ERROR_EV = 1 << 13, + MCINT_RX_CONTENT_AVAILABLE = 1 << 14, + MCINT_RX_PACKET_RECEIVED_EV = 1 << 15, +}; + +int mclink_probe(void) +{ + unsigned int k; + int slaves = 0; + + for (k = 0; k < CONFIG_SYS_MCLINK_MAX; ++k) { + int timeout = 0; + unsigned int ctr = 0; + u16 mc_status; + + FPGA_GET_REG(k, mc_status, &mc_status); + + if (!(mc_status & (1 << 15))) + break; + + FPGA_SET_REG(k, mc_control, 0x8000); + + FPGA_GET_REG(k, mc_status, &mc_status); + while (!(mc_status & (1 << 14))) { + udelay(100); + if (ctr++ > 500) { + timeout = 1; + break; + } + FPGA_GET_REG(k, mc_status, &mc_status); + } + if (timeout) + break; + + printf("waited %d us for mclink %d to come up\n", ctr * 100, k); + + slaves++; + } + + return slaves; +} + +int mclink_send(u8 slave, u16 addr, u16 data) +{ + unsigned int ctr = 0; + u16 int_status; + u16 rx_cmd_status; + u16 rx_cmd; + + /* reset interrupt status */ + FPGA_GET_REG(0, mc_int, &int_status); + FPGA_SET_REG(0, mc_int, int_status); + + /* send */ + FPGA_SET_REG(0, mc_tx_address, addr); + FPGA_SET_REG(0, mc_tx_data, data); + FPGA_SET_REG(0, mc_tx_cmd, (slave & 0x03) << 14); + FPGA_SET_REG(0, mc_control, 0x8001); + + /* wait for reply */ + FPGA_GET_REG(0, mc_int, &int_status); + while (!(int_status & MCINT_RX_PACKET_RECEIVED_EV)) { + udelay(100); + if (ctr++ > 3) + return -ETIMEDOUT; + FPGA_GET_REG(0, mc_int, &int_status); + } + + FPGA_GET_REG(0, mc_rx_cmd_status, &rx_cmd_status); + rx_cmd = (rx_cmd_status >> 12) & 0x03; + if (rx_cmd != 0) + printf("mclink_send: received cmd %d, expected %d\n", rx_cmd, + 0); + + return 0; +} + +int mclink_receive(u8 slave, u16 addr, u16 *data) +{ + u16 rx_cmd_status; + u16 rx_cmd; + u16 int_status; + unsigned int ctr = 0; + + /* send read request */ + FPGA_SET_REG(0, mc_tx_address, addr); + FPGA_SET_REG(0, mc_tx_cmd, + ((slave & 0x03) << 14) | (1 << 12) | (1 << 0)); + FPGA_SET_REG(0, mc_control, 0x8001); + + + /* wait for reply */ + FPGA_GET_REG(0, mc_int, &int_status); + while (!(int_status & MCINT_RX_CONTENT_AVAILABLE)) { + udelay(100); + if (ctr++ > 3) + return -ETIMEDOUT; + FPGA_GET_REG(0, mc_int, &int_status); + } + + /* check reply */ + FPGA_GET_REG(0, mc_rx_cmd_status, &rx_cmd_status); + if ((rx_cmd_status >> 14) != slave) { + printf("mclink_receive: reply from slave %d, expected %d\n", + rx_cmd_status >> 14, slave); + return -EINVAL; + } + + rx_cmd = (rx_cmd_status >> 12) & 0x03; + if (rx_cmd != 1) { + printf("mclink_send: received cmd %d, expected %d\n", + rx_cmd, 1); + return -EIO; + } + + FPGA_GET_REG(0, mc_rx_data, data); + + return 0; +} diff --git a/board/gdsys/common/mclink.h b/board/gdsys/common/mclink.h new file mode 100644 index 0000000..febd46a --- /dev/null +++ b/board/gdsys/common/mclink.h @@ -0,0 +1,15 @@ +/* + * (C) Copyright 2012 + * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _MCLINK_H_ +#define _MCLINK_H_ + +int mclink_probe(void); +int mclink_send(u8 slave, u16 addr, u16 data); +int mclink_receive(u8 slave, u16 addr, u16 *data); + +#endif diff --git a/board/gdsys/common/osd.c b/board/gdsys/common/osd.c index 45cea5e..c49cd9a 100644 --- a/board/gdsys/common/osd.c +++ b/board/gdsys/common/osd.c @@ -7,7 +7,7 @@ #include <common.h> #include <i2c.h> -#include <asm/io.h> +#include <malloc.h> #include <gdsys_fpga.h> @@ -26,10 +26,6 @@ #define PIXCLK_640_480_60 25180000 -#define BASE_WIDTH 32 -#define BASE_HEIGHT 16 -#define BUFSIZE (BASE_WIDTH * BASE_HEIGHT) - enum { CH7301_CM = 0x1c, /* Clock Mode Register */ CH7301_IC = 0x1d, /* Input Clock Register */ @@ -51,37 +47,55 @@ enum { CH7301_DSP = 0x56, /* DVI Sync polarity Register */ }; +unsigned int base_width; +unsigned int base_height; +size_t bufsize; +u16 *buf; + +unsigned int max_osd_screen = CONFIG_SYS_OSD_SCREENS - 1; + +#ifdef CONFIG_SYS_CH7301 +int ch7301_i2c[] = CONFIG_SYS_CH7301_I2C; +#endif + #if defined(CONFIG_SYS_ICS8N3QV01) || defined(CONFIG_SYS_SIL1178) static void fpga_iic_write(unsigned screen, u8 slave, u8 reg, u8 data) { - struct ihs_fpga *fpga = (struct ihs_fpga *)CONFIG_SYS_FPGA_BASE(screen); - struct ihs_i2c *i2c = &fpga->i2c; + u16 val; - while (in_le16(&fpga->extended_interrupt) & (1 << 12)) - ; - out_le16(&i2c->write_mailbox_ext, reg | (data << 8)); - out_le16(&i2c->write_mailbox, 0xc400 | (slave << 1)); + do { + FPGA_GET_REG(screen, extended_interrupt, &val); + } while (val & (1 << 12)); + + FPGA_SET_REG(screen, i2c.write_mailbox_ext, reg | (data << 8)); + FPGA_SET_REG(screen, i2c.write_mailbox, 0xc400 | (slave << 1)); } static u8 fpga_iic_read(unsigned screen, u8 slave, u8 reg) { - struct ihs_fpga *fpga = (struct ihs_fpga *)CONFIG_SYS_FPGA_BASE(screen); - struct ihs_i2c *i2c = &fpga->i2c; unsigned int ctr = 0; + u16 val; + + do { + FPGA_GET_REG(screen, extended_interrupt, &val); + } while (val & (1 << 12)); - while (in_le16(&fpga->extended_interrupt) & (1 << 12)) - ; - out_le16(&fpga->extended_interrupt, 1 << 14); - out_le16(&i2c->write_mailbox_ext, reg); - out_le16(&i2c->write_mailbox, 0xc000 | (slave << 1)); - while (!(in_le16(&fpga->extended_interrupt) & (1 << 14))) { + FPGA_SET_REG(screen, extended_interrupt, 1 << 14); + FPGA_SET_REG(screen, i2c.write_mailbox_ext, reg); + FPGA_SET_REG(screen, i2c.write_mailbox, 0xc000 | (slave << 1)); + + FPGA_GET_REG(screen, extended_interrupt, &val); + while (!(val & (1 << 14))) { udelay(100000); if (ctr++ > 5) { printf("iic receive timeout\n"); break; } + FPGA_GET_REG(screen, extended_interrupt, &val); } - return in_le16(&i2c->read_mailbox_ext) >> 8; + + FPGA_GET_REG(screen, i2c.read_mailbox_ext, &val); + return val >> 8; } #endif @@ -113,7 +127,6 @@ static void mpc92469ac_calc_parameters(unsigned int fout, static void mpc92469ac_set(unsigned screen, unsigned int fout) { - struct ihs_fpga *fpga = (struct ihs_fpga *)CONFIG_SYS_FPGA_BASE(screen); unsigned int n; unsigned int m; unsigned int bitval = 0; @@ -134,7 +147,7 @@ static void mpc92469ac_set(unsigned screen, unsigned int fout) break; } - out_le16(&fpga->mpc3w_control, (bitval << 9) | m); + FPGA_SET_REG(screen, mpc3w_control, (bitval << 9) | m); } #endif @@ -249,14 +262,12 @@ static void ics8n3qv01_set(unsigned screen, unsigned int fout) static int osd_write_videomem(unsigned screen, unsigned offset, u16 *data, size_t charcount) { - struct ihs_fpga *fpga = - (struct ihs_fpga *) CONFIG_SYS_FPGA_BASE(screen); unsigned int k; for (k = 0; k < charcount; ++k) { - if (offset + k >= BUFSIZE) + if (offset + k >= bufsize) return -1; - out_le16(&fpga->videomem + offset + k, data[k]); + FPGA_SET_REG(screen, videomem[offset + k], data[k]); } return charcount; @@ -266,14 +277,13 @@ static int osd_print(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { unsigned screen; - for (screen = 0; screen < CONFIG_SYS_OSD_SCREENS; ++screen) { + for (screen = 0; screen <= max_osd_screen; ++screen) { unsigned x; unsigned y; unsigned charcount; unsigned len; u8 color; unsigned int k; - u16 buf[BUFSIZE]; char *text; int res; @@ -287,12 +297,12 @@ static int osd_print(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) color = simple_strtoul(argv[3], NULL, 16); text = argv[4]; charcount = strlen(text); - len = (charcount > BUFSIZE) ? BUFSIZE : charcount; + len = (charcount > bufsize) ? bufsize : charcount; for (k = 0; k < len; ++k) buf[k] = (text[k] << 8) | color; - res = osd_write_videomem(screen, y * BASE_WIDTH + x, buf, len); + res = osd_write_videomem(screen, y * base_width + x, buf, len); if (res < 0) return res; } @@ -302,24 +312,32 @@ static int osd_print(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) int osd_probe(unsigned screen) { - struct ihs_fpga *fpga = (struct ihs_fpga *)CONFIG_SYS_FPGA_BASE(screen); - struct ihs_osd *osd = &fpga->osd; - u16 version = in_le16(&osd->version); - u16 features = in_le16(&osd->features); - unsigned width; - unsigned height; + u16 version; + u16 features; u8 value; +#ifdef CONFIG_SYS_CH7301 + int old_bus = i2c_get_bus_num(); +#endif - width = ((features & 0x3f00) >> 8) + 1; - height = (features & 0x001f) + 1; + FPGA_GET_REG(0, osd.version, &version); + FPGA_GET_REG(0, osd.features, &features); + + base_width = ((features & 0x3f00) >> 8) + 1; + base_height = (features & 0x001f) + 1; + bufsize = base_width * base_height; + buf = malloc(sizeof(u16) * bufsize); + if (!buf) + return -1; printf("OSD%d: Digital-OSD version %01d.%02d, %d" "x%d characters\n", - screen, version/100, version%100, width, height); + screen, version/100, version%100, base_width, base_height); #ifdef CONFIG_SYS_CH7301 + i2c_set_bus_num(ch7301_i2c[screen]); value = i2c_reg_read(CH7301_I2C_ADDR, CH7301_DID); if (value != 0x17) { printf(" Probing CH7301 failed, DID %02x\n", value); + i2c_set_bus_num(old_bus); return -1; } i2c_reg_write(CH7301_I2C_ADDR, CH7301_TPCP, 0x08); @@ -327,6 +345,7 @@ int osd_probe(unsigned screen) i2c_reg_write(CH7301_I2C_ADDR, CH7301_TPF, 0x60); i2c_reg_write(CH7301_I2C_ADDR, CH7301_DC, 0x09); i2c_reg_write(CH7301_I2C_ADDR, CH7301_PM, 0xc0); + i2c_set_bus_num(old_bus); #endif #ifdef CONFIG_SYS_MPC92469AC @@ -356,12 +375,15 @@ int osd_probe(unsigned screen) fpga_iic_write(screen, SIL1178_MASTER_I2C_ADDRESS, 0x08, 0x37); #endif - out_le16(&fpga->videocontrol, 0x0002); - out_le16(&osd->control, 0x0049); + FPGA_SET_REG(screen, videocontrol, 0x0002); + FPGA_SET_REG(screen, osd.control, 0x0049); + + FPGA_SET_REG(screen, osd.xy_size, ((32 - 1) << 8) | (16 - 1)); + FPGA_SET_REG(screen, osd.x_pos, 0x007f); + FPGA_SET_REG(screen, osd.y_pos, 0x005f); - out_le16(&osd->xy_size, ((32 - 1) << 8) | (16 - 1)); - out_le16(&osd->x_pos, 0x007f); - out_le16(&osd->y_pos, 0x005f); + if (screen > max_osd_screen) + max_osd_screen = screen; return 0; } @@ -370,11 +392,11 @@ int osd_write(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { unsigned screen; - for (screen = 0; screen < CONFIG_SYS_OSD_SCREENS; ++screen) { + for (screen = 0; screen <= max_osd_screen; ++screen) { unsigned x; unsigned y; unsigned k; - u16 buffer[BASE_WIDTH]; + u16 buffer[base_width]; char *rp; u16 *wp = buffer; unsigned count = (argc > 4) ? @@ -399,13 +421,13 @@ int osd_write(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) rp += 4; wp++; - if (wp - buffer > BASE_WIDTH) + if (wp - buffer > base_width) break; } for (k = 0; k < count; ++k) { unsigned offset = - y * BASE_WIDTH + x + k * (wp - buffer); + y * base_width + x + k * (wp - buffer); osd_write_videomem(screen, offset, buffer, wp - buffer); } diff --git a/board/isee/igep0033/board.c b/board/isee/igep0033/board.c index c0f0c0d..9e91f68 100644 --- a/board/isee/igep0033/board.c +++ b/board/isee/igep0033/board.c @@ -1,5 +1,5 @@ /* - * Board functions for IGEP COM AQUILA/CYGNUS based boards + * Board functions for IGEP COM AQUILA based boards * * Copyright (C) 2013, ISEE 2007 SL - http://www.isee.biz/ * @@ -27,11 +27,6 @@ DECLARE_GLOBAL_DATA_PTR; -static struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE; - -/* MII mode defines */ -#define RMII_MODE_ENABLE 0x4D - static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; #ifdef CONFIG_SPL_BUILD @@ -66,60 +61,39 @@ static struct emif_regs ddr3_emif_reg_data = { .zq_config = K4B2G1646EBIH9_ZQ_CFG, .emif_ddr_phy_ctlr_1 = K4B2G1646EBIH9_EMIF_READ_LATENCY, }; -#endif -/* - * Early system init of muxing and clocks. - */ -void s_init(void) -{ - /* - * Save the boot parameters passed from romcode. - * We cannot delay the saving further than this, - * to prevent overwrites. - */ -#ifdef CONFIG_SPL_BUILD - save_omap_boot_params(); -#endif - - /* WDT1 is already running when the bootloader gets control - * Disable it to avoid "random" resets - */ - writel(0xAAAA, &wdtimer->wdtwspr); - while (readl(&wdtimer->wdtwwps) != 0x0) - ; - writel(0x5555, &wdtimer->wdtwspr); - while (readl(&wdtimer->wdtwwps) != 0x0) - ; - -#ifdef CONFIG_SPL_BUILD - /* Setup the PLLs and the clocks for the peripherals */ - pll_init(); +#define OSC (V_OSCK/1000000) +const struct dpll_params dpll_ddr = { + 303, OSC-1, 1, -1, -1, -1, -1}; - /* Enable RTC32K clock */ - rtc32k_enable(); +const struct dpll_params *get_dpll_ddr_params(void) +{ + return &dpll_ddr; +} +void set_uart_mux_conf(void) +{ enable_uart0_pin_mux(); +} - uart_soft_reset(); - gd = &gdata; - - preloader_console_init(); - - /* Configure board pin mux */ +void set_mux_conf_regs(void) +{ enable_board_pin_mux(); +} +void sdram_init(void) +{ config_ddr(303, K4B2G1646EBIH9_IOCTRL_VALUE, &ddr3_data, &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0); -#endif } +#endif /* * Basic board specific setup. Pinmux has been handled already. */ int board_init(void) { - gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100; + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; gpmc_init(); @@ -181,7 +155,8 @@ int board_eth_init(bd_t *bis) eth_setenv_enetaddr("ethaddr", mac_addr); } - writel(RMII_MODE_ENABLE, &cdev->miisel); + writel((GMII1_SEL_RMII | RMII1_IO_CLK_EN), + &cdev->miisel); rv = cpsw_register(&cpsw_data); if (rv < 0) diff --git a/board/isee/igep0033/board.h b/board/isee/igep0033/board.h index a6f17e3..a11d7ab 100644 --- a/board/isee/igep0033/board.h +++ b/board/isee/igep0033/board.h @@ -1,5 +1,5 @@ /* - * IGEP COM AQUILA/CYGNUS boards information header + * IGEP COM AQUILA boards information header * * Copyright (C) 2013, ISEE 2007 SL - http://www.isee.biz/ * diff --git a/board/isee/igep00x0/igep00x0.c b/board/isee/igep00x0/igep00x0.c index 77a9bc6..7a7500b 100644 --- a/board/isee/igep00x0/igep00x0.c +++ b/board/isee/igep00x0/igep00x0.c @@ -138,6 +138,18 @@ int board_mmc_init(bd_t *bis) } #endif +void set_fdt(void) +{ + switch (gd->bd->bi_arch_number) { + case MACH_TYPE_IGEP0020: + setenv("dtbfile", "omap3-igep0020.dtb"); + break; + case MACH_TYPE_IGEP0030: + setenv("dtbfile", "omap3-igep0030.dtb"); + break; + } +} + /* * Routine: misc_init_r * Description: Configure board specific parts @@ -150,6 +162,8 @@ int misc_init_r(void) dieid_num_r(); + set_fdt(); + return 0; } diff --git a/board/jse/init.S b/board/jse/init.S index bccc7e0..7b918b5 100644 --- a/board/jse/init.S +++ b/board/jse/init.S @@ -1,28 +1,6 @@ -/*------------------------------------------------------------------------+ */ -/* */ -/* This source code is dual-licensed. You may use it under the terms */ -/* of the GNU General Public License version 2, or under the license */ -/* below. */ -/* */ -/* This source code has been made available to you by IBM on an AS-IS */ -/* basis. Anyone receiving this source is licensed under IBM */ -/* copyrights to use it in any way he or she deems fit, including */ -/* copying it, modifying it, compiling it, and redistributing it either */ -/* with or without modifications. No license under IBM patents or */ -/* patent applications is to be implied by the copyright license. */ -/* */ -/* Any user of this software should understand that IBM cannot provide */ -/* technical support for this software and will not be responsible for */ -/* any consequences resulting from the use of this software. */ -/* */ -/* Any person who transfers this source code or any derivative work */ -/* must include the IBM copyright notice, this paragraph, and the */ -/* preceding two paragraphs in the transferred software. */ -/* */ -/* COPYRIGHT I B M CORPORATION 1995 */ -/* LICENSED MATERIAL - PROGRAM PROPERTY OF I B M */ -/*------------------------------------------------------------------------- */ - +/* + * SPDX-License-Identifier: GPL-2.0 ibm-pibs + */ /*------------------------------------------------------------------------- */ /* Function: ext_bus_cntlr_init */ /* Description: Initializes the External Bus Controller for the external */ diff --git a/board/mpl/common/pci.c b/board/mpl/common/pci.c index f9bb6ab..6ab263a 100644 --- a/board/mpl/common/pci.c +++ b/board/mpl/common/pci.c @@ -1,25 +1,6 @@ -/*-----------------------------------------------------------------------------+ -| This source code is dual-licensed. You may use it under the terms of -| the GNU General Public License version 2, or under the license below. -| -| This source code has been made available to you by IBM on an AS-IS -| basis. Anyone receiving this source is licensed under IBM -| copyrights to use it in any way he or she deems fit, including -| copying it, modifying it, compiling it, and redistributing it either -| with or without modifications. No license under IBM patents or -| patent applications is to be implied by the copyright license. -| -| Any user of this software should understand that IBM cannot provide -| technical support for this software and will not be responsible for -| any consequences resulting from the use of this software. -| -| Any person who transfers this source code or any derivative work -| must include the IBM copyright notice, this paragraph, and the -| preceding two paragraphs in the transferred software. -| -| COPYRIGHT I B M CORPORATION 1995 -| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M -+-----------------------------------------------------------------------------*/ +/* + * SPDX-License-Identifier: GPL-2.0 ibm-pibs + */ /* * Adapted for PIP405 03.07.01 * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch diff --git a/board/mpl/mip405/init.S b/board/mpl/mip405/init.S index 39a1d68..bf886c0 100644 --- a/board/mpl/mip405/init.S +++ b/board/mpl/mip405/init.S @@ -1,26 +1,6 @@ -/*------------------------------------------------------------------------------+ - * This source code is dual-licensed. You may use it under the terms of - * the GNU General Public License version 2, or under the license below. - * - * This source code has been made available to you by IBM on an AS-IS - * basis. Anyone receiving this source is licensed under IBM - * copyrights to use it in any way he or she deems fit, including - * copying it, modifying it, compiling it, and redistributing it either - * with or without modifications. No license under IBM patents or - * patent applications is to be implied by the copyright license. - * - * Any user of this software should understand that IBM cannot provide - * technical support for this software and will not be responsible for - * any consequences resulting from the use of this software. - * - * Any person who transfers this source code or any derivative work - * must include the IBM copyright notice, this paragraph, and the - * preceding two paragraphs in the transferred software. - * - * COPYRIGHT I B M CORPORATION 1995 - * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M - *-------------------------------------------------------------------------------*/ - +/* + * SPDX-License-Identifier: GPL-2.0 ibm-pibs + */ /*----------------------------------------------------------------------------- * Function: ext_bus_cntlr_init * Description: Initializes the External Bus Controller for the external diff --git a/board/mpl/pip405/init.S b/board/mpl/pip405/init.S index b77517f..9ed2799 100644 --- a/board/mpl/pip405/init.S +++ b/board/mpl/pip405/init.S @@ -1,26 +1,6 @@ -/*------------------------------------------------------------------------------+ - * This source code is dual-licensed. You may use it under the terms of - * the GNU General Public License version 2, or under the license below. - * - * This source code has been made available to you by IBM on an AS-IS - * basis. Anyone receiving this source is licensed under IBM - * copyrights to use it in any way he or she deems fit, including - * copying it, modifying it, compiling it, and redistributing it either - * with or without modifications. No license under IBM patents or - * patent applications is to be implied by the copyright license. - * - * Any user of this software should understand that IBM cannot provide - * technical support for this software and will not be responsible for - * any consequences resulting from the use of this software. - * - * Any person who transfers this source code or any derivative work - * must include the IBM copyright notice, this paragraph, and the - * preceding two paragraphs in the transferred software. - * - * COPYRIGHT I B M CORPORATION 1995 - * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M - *-------------------------------------------------------------------------------*/ - +/* + * SPDX-License-Identifier: GPL-2.0 ibm-pibs + */ /*----------------------------------------------------------------------------- * Function: ext_bus_cntlr_init * Description: Initializes the External Bus Controller for the external diff --git a/board/overo/overo.c b/board/overo/overo.c index a6e2e93..aace42a 100644 --- a/board/overo/overo.c +++ b/board/overo/overo.c @@ -142,16 +142,22 @@ void get_board_mem_timings(struct board_sdrc_timings *timings) timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; break; case REVISION_1: /* Micron 256MB/512MB, 1/2 banks of 256MB */ - timings->mcfg = MICRON_V_MCFG_165(256 << 20); - timings->ctrla = MICRON_V_ACTIMA_165; - timings->ctrlb = MICRON_V_ACTIMB_165; - timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; + timings->mcfg = MICRON_V_MCFG_200(256 << 20); + timings->ctrla = MICRON_V_ACTIMA_200; + timings->ctrlb = MICRON_V_ACTIMB_200; + timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz; break; case REVISION_2: /* Hynix 256MB/512MB, 1/2 banks of 256MB */ - timings->mcfg = HYNIX_V_MCFG_165(256 << 20); - timings->ctrla = HYNIX_V_ACTIMA_165; - timings->ctrlb = HYNIX_V_ACTIMB_165; - timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; + timings->mcfg = HYNIX_V_MCFG_200(256 << 20); + timings->ctrla = HYNIX_V_ACTIMA_200; + timings->ctrlb = HYNIX_V_ACTIMB_200; + timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz; + break; + case REVISION_3: /* Micron 512MB/1024MB, 1/2 banks of 512MB */ + timings->mcfg = MCFG(512 << 20, 15); + timings->ctrla = MICRON_V_ACTIMA_200; + timings->ctrlb = MICRON_V_ACTIMB_200; + timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz; break; default: timings->mcfg = MICRON_V_MCFG_165(128 << 20); diff --git a/board/overo/overo.h b/board/overo/overo.h index 88e197d..64604de 100644 --- a/board/overo/overo.h +++ b/board/overo/overo.h @@ -21,6 +21,7 @@ const omap3_sysinfo sysinfo = { #define REVISION_0 0x0 #define REVISION_1 0x1 #define REVISION_2 0x2 +#define REVISION_3 0x3 /* * IEN - Input Enable diff --git a/board/phytec/pcm051/board.c b/board/phytec/pcm051/board.c index 6291d03..e40b0bd 100644 --- a/board/phytec/pcm051/board.c +++ b/board/phytec/pcm051/board.c @@ -30,11 +30,7 @@ DECLARE_GLOBAL_DATA_PTR; -static struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE; - /* MII mode defines */ -#define MII_MODE_ENABLE 0x0 -#define RGMII_MODE_ENABLE 0xA #define RMII_RGMII2_MODE_ENABLE 0x49 static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; @@ -44,6 +40,15 @@ static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; /* DDR RAM defines */ #define DDR_CLK_MHZ 303 /* DDR_DPLL_MULT value */ +#define OSC (V_OSCK/1000000) +const struct dpll_params dpll_ddr = { + DDR_CLK_MHZ, OSC-1, 1, -1, -1, -1, -1}; + +const struct dpll_params *get_dpll_ddr_params(void) +{ + return &dpll_ddr; +} + static const struct ddr_data ddr3_data = { .datardsratio0 = MT41J256M8HX15E_RD_DQS, .datawdsratio0 = MT41J256M8HX15E_WR_DQS, @@ -76,57 +81,27 @@ static struct emif_regs ddr3_emif_reg_data = { .emif_ddr_phy_ctlr_1 = MT41J256M8HX15E_EMIF_READ_LATENCY | PHY_EN_DYN_PWRDN, }; -#endif -/* - * early system init of muxing and clocks. - */ -void s_init(void) +void set_uart_mux_conf(void) { - /* - * Save the boot parameters passed from romcode. - * We cannot delay the saving further than this, - * to prevent overwrites. - */ -#ifdef CONFIG_SPL_BUILD - save_omap_boot_params(); -#endif - - /* - * WDT1 is already running when the bootloader gets control - * Disable it to avoid "random" resets - */ - writel(0xAAAA, &wdtimer->wdtwspr); - while (readl(&wdtimer->wdtwwps) != 0x0) - ; - writel(0x5555, &wdtimer->wdtwspr); - while (readl(&wdtimer->wdtwwps) != 0x0) - ; - -#ifdef CONFIG_SPL_BUILD - /* Setup the PLLs and the clocks for the peripherals */ - pll_init(); - - /* Enable RTC32K clock */ - rtc32k_enable(); - enable_uart0_pin_mux(); - uart_soft_reset(); - - gd = &gdata; - - preloader_console_init(); +} +void set_mux_conf_regs(void) +{ /* Initalize the board header */ enable_i2c0_pin_mux(); i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); enable_board_pin_mux(); +} +void sdram_init(void) +{ config_ddr(DDR_CLK_MHZ, MT41J256M8HX15E_IOCTRL_VALUE, &ddr3_data, &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0); -#endif } +#endif /* * Basic board specific setup. Pinmux has been handled already. @@ -135,7 +110,7 @@ int board_init(void) { i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); - gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100; + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; return 0; } diff --git a/board/samsung/common/multi_i2c.c b/board/samsung/common/multi_i2c.c index 4fce987..084858d 100644 --- a/board/samsung/common/multi_i2c.c +++ b/board/samsung/common/multi_i2c.c @@ -11,13 +11,12 @@ /* Handle multiple I2C buses instances */ int get_multi_scl_pin(void) { - unsigned int bus = I2C_GET_BUS(); + unsigned int bus = i2c_get_bus_num(); switch (bus) { - case I2C_0: /* I2C_0 definition - compatibility layer */ - case I2C_5: + case I2C_0: return CONFIG_SOFT_I2C_I2C5_SCL; - case I2C_9: + case I2C_1: return CONFIG_SOFT_I2C_I2C9_SCL; default: printf("I2C_%d not supported!\n", bus); @@ -28,13 +27,12 @@ int get_multi_scl_pin(void) int get_multi_sda_pin(void) { - unsigned int bus = I2C_GET_BUS(); + unsigned int bus = i2c_get_bus_num(); switch (bus) { - case I2C_0: /* I2C_0 definition - compatibility layer */ - case I2C_5: + case I2C_0: return CONFIG_SOFT_I2C_I2C5_SDA; - case I2C_9: + case I2C_1: return CONFIG_SOFT_I2C_I2C9_SDA; default: printf("I2C_%d not supported!\n", bus); diff --git a/board/samsung/dts/exynos5250-smdk5250.dts b/board/samsung/dts/exynos5250-smdk5250.dts index 80ffe30..1e94c7f 100644 --- a/board/samsung/dts/exynos5250-smdk5250.dts +++ b/board/samsung/dts/exynos5250-smdk5250.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ ARCH_CPU_DTS +/include/ "exynos5250.dtsi" / { model = "SAMSUNG SMDK5250 board based on EXYNOS5250"; diff --git a/board/samsung/dts/exynos5250-snow.dts b/board/samsung/dts/exynos5250-snow.dts index dca3386..7832e4e 100644 --- a/board/samsung/dts/exynos5250-snow.dts +++ b/board/samsung/dts/exynos5250-snow.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ ARCH_CPU_DTS +/include/ "exynos5250.dtsi" / { model = "Google Snow"; diff --git a/board/samsung/goni/goni.c b/board/samsung/goni/goni.c index c05801d..5b3d6ef 100644 --- a/board/samsung/goni/goni.c +++ b/board/samsung/goni/goni.c @@ -32,7 +32,11 @@ int power_init_board(void) { int ret; - ret = pmic_init(I2C_5); + /* + * For PMIC the I2C bus is named as I2C5, but it is connected + * to logical I2C adapter 0 + */ + ret = pmic_init(I2C_0); if (ret) return ret; diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c index c8698f3..7f61d17 100644 --- a/board/samsung/trats/trats.c +++ b/board/samsung/trats/trats.c @@ -61,10 +61,10 @@ void i2c_init_board(void) struct exynos4_gpio_part2 *gpio2 = (struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2(); - /* I2C_5 -> PMIC */ + /* I2C_5 -> PMIC -> Adapter 0 */ s5p_gpio_direction_output(&gpio1->b, 7, 1); s5p_gpio_direction_output(&gpio1->b, 6, 1); - /* I2C_9 -> FG */ + /* I2C_9 -> FG -> Adapter 1 */ s5p_gpio_direction_output(&gpio2->y4, 0, 1); s5p_gpio_direction_output(&gpio2->y4, 1, 1); } @@ -282,10 +282,17 @@ int power_init_board(void) struct power_battery *pb; struct pmic *p_fg, *p_chrg, *p_muic, *p_bat; - ret = pmic_init(I2C_5); + /* + * For PMIC/MUIC the I2C bus is named as I2C5, but it is connected + * to logical I2C adapter 0 + * + * The FUEL_GAUGE is marked as I2C9 on the schematic, but connected + * to logical I2C adapter 1 + */ + ret = pmic_init(I2C_0); ret |= pmic_init_max8997(); - ret |= power_fg_init(I2C_9); - ret |= power_muic_init(I2C_5); + ret |= power_fg_init(I2C_1); + ret |= power_muic_init(I2C_0); ret |= power_bat_init(0); if (ret) return ret; diff --git a/board/samsung/universal_c210/universal.c b/board/samsung/universal_c210/universal.c index 2e1dba6..54d0e1e 100644 --- a/board/samsung/universal_c210/universal.c +++ b/board/samsung/universal_c210/universal.c @@ -45,6 +45,10 @@ int power_init_board(void) { int ret; + /* + * For PMIC the I2C bus is named as I2C5, but it is connected + * to logical I2C adapter 0 + */ ret = pmic_init(I2C_5); if (ret) return ret; diff --git a/board/sbc8548/sbc8548.c b/board/sbc8548/sbc8548.c index dee8710..8378518 100644 --- a/board/sbc8548/sbc8548.c +++ b/board/sbc8548/sbc8548.c @@ -65,8 +65,8 @@ local_bus_init(void) get_sys_info(&sysinfo); - lbc_mhz = sysinfo.freqLocalBus / 1000000; - clkdiv = sysinfo.freqSystemBus / sysinfo.freqLocalBus; + lbc_mhz = sysinfo.freq_localbus / 1000000; + clkdiv = sysinfo.freq_systembus / sysinfo.freq_localbus; debug("LCRR=0x%x, CD=%d, MHz=%d\n", lcrr, clkdiv, lbc_mhz); diff --git a/board/sc3/init.S b/board/sc3/init.S index 6352368..9921f8f 100644 --- a/board/sc3/init.S +++ b/board/sc3/init.S @@ -1,31 +1,6 @@ -/*------------------------------------------------------------------------------+ - * - * This souce code has been made available to you by EuroDesign - * (www.eurodsn.de). It's based on the original IBM source code, so - * this follows: - * - * This source code is dual-licensed. You may use it under the terms of the - * GNU General Public License version 2, or under the license below. - * - * This source code has been made available to you by IBM on an AS-IS - * basis. Anyone receiving this source is licensed under IBM - * copyrights to use it in any way he or she deems fit, including - * copying it, modifying it, compiling it, and redistributing it either - * with or without modifications. No license under IBM patents or - * patent applications is to be implied by the copyright license. - * - * Any user of this software should understand that IBM cannot provide - * technical support for this software and will not be responsible for - * any consequences resulting from the use of this software. - * - * Any person who transfers this source code or any derivative work - * must include the IBM copyright notice, this paragraph, and the - * preceding two paragraphs in the transferred software. - * - * COPYRIGHT I B M CORPORATION 1995 - * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M - *------------------------------------------------------------------------------- */ - +/* + * SPDX-License-Identifier: GPL-2.0 ibm-pibs + */ #include <config.h> #include <asm/ppc4xx.h> diff --git a/board/scb9328/intel.h b/board/scb9328/intel.h index 77498b6..5596d27 100644 --- a/board/scb9328/intel.h +++ b/board/scb9328/intel.h @@ -2,28 +2,7 @@ * Copyright (C) 2002 ETC s.r.o. * All rights reserved. * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the ETC s.r.o. nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * SPDX-License-Identifier: BSD-3-Clause * * Written by Marcel Telka <marcel@telka.sk>, 2002. * diff --git a/board/siemens/common/board.c b/board/siemens/common/board.c new file mode 100644 index 0000000..6279c32 --- /dev/null +++ b/board/siemens/common/board.c @@ -0,0 +1,171 @@ +/* + * Common board functions for siemens AM335X based boards + * (C) Copyright 2013 Siemens Schweiz AG + * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Based on: + * U-Boot file:/board/ti/am335x/board.c + * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <errno.h> +#include <spl.h> +#include <asm/arch/cpu.h> +#include <asm/arch/hardware.h> +#include <asm/arch/omap.h> +#include <asm/arch/ddr_defs.h> +#include <asm/arch/clock.h> +#include <asm/arch/gpio.h> +#include <asm/arch/mmc_host_def.h> +#include <asm/arch/sys_proto.h> +#include <asm/io.h> +#include <asm/emif.h> +#include <asm/gpio.h> +#include <i2c.h> +#include <miiphy.h> +#include <cpsw.h> +#include <watchdog.h> +#include "../common/factoryset.h" + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_SPL_BUILD +void set_uart_mux_conf(void) +{ + enable_uart0_pin_mux(); +} + +void set_mux_conf_regs(void) +{ + /* Initalize the board header */ + enable_i2c0_pin_mux(); + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + if (read_eeprom() < 0) + puts("Could not get board ID.\n"); + + enable_board_pin_mux(); +} + +void sdram_init(void) +{ + spl_siemens_board_init(); + board_init_ddr(); + + return; +} +#endif /* #ifdef CONFIG_SPL_BUILD */ + +#ifndef CONFIG_SPL_BUILD +/* + * Basic board specific setup. Pinmux has been handled already. + */ +int board_init(void) +{ +#if defined(CONFIG_HW_WATCHDOG) + hw_watchdog_init(); +#endif /* defined(CONFIG_HW_WATCHDOG) */ + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + if (read_eeprom() < 0) + puts("Could not get board ID.\n"); + + gd->bd->bi_arch_number = CONFIG_MACH_TYPE; + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; + +#ifdef CONFIG_FACTORYSET + factoryset_read_eeprom(CONFIG_SYS_I2C_EEPROM_ADDR); +#endif + gpmc_init(); + +#ifdef CONFIG_VIDEO + board_video_init(); +#endif + + return 0; +} +#endif /* #ifndef CONFIG_SPL_BUILD */ + +#define OSC (V_OSCK/1000000) +const struct dpll_params dpll_ddr = { + DDR_PLL_FREQ, OSC-1, 1, -1, -1, -1, -1}; + +const struct dpll_params *get_dpll_ddr_params(void) +{ + return &dpll_ddr; +} + +#ifdef CONFIG_BOARD_LATE_INIT +int board_late_init(void) +{ + omap_nand_switch_ecc(1, 8); + + return 0; +} +#endif + +#ifndef CONFIG_SPL_BUILD +#if defined(BOARD_DFU_BUTTON_GPIO) +/* + * This command returns the status of the user button on + * Input - none + * Returns - 1 if button is held down + * 0 if button is not held down + */ +static int +do_userbutton(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + int button = 0; + int gpio; + + gpio = BOARD_DFU_BUTTON_GPIO; + gpio_request(gpio, "DFU"); + gpio_direction_input(gpio); + if (gpio_get_value(gpio)) + button = 1; + else + button = 0; + + gpio_free(gpio); + if (!button) { + /* LED0 - RED=1: GPIO2_0 2*32 = 64 */ + gpio_request(BOARD_DFU_BUTTON_LED, ""); + gpio_direction_output(BOARD_DFU_BUTTON_LED, 1); + gpio_set_value(BOARD_DFU_BUTTON_LED, 1); + } + + return button; +} + +U_BOOT_CMD( + dfubutton, CONFIG_SYS_MAXARGS, 1, do_userbutton, + "Return the status of the DFU button", + "" +); +#endif + +static int +do_usertestwdt(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + printf("\n\n\n Go into infinite loop\n\n\n"); + while (1) + ; + return 0; +}; + +U_BOOT_CMD( + testwdt, CONFIG_SYS_MAXARGS, 1, do_usertestwdt, + "Sends U-Boot into infinite loop", + "" +); + +#ifndef CONFIG_SYS_DCACHE_OFF +void enable_caches(void) +{ + printf("Enable d-cache\n"); + /* Enable D-cache. I-cache is already enabled in start.S */ + dcache_enable(); +} +#endif /* CONFIG_SYS_DCACHE_OFF */ +#endif /* !CONFIG_SPL_BUILD */ diff --git a/board/siemens/common/factoryset.c b/board/siemens/common/factoryset.c new file mode 100644 index 0000000..eda9141 --- /dev/null +++ b/board/siemens/common/factoryset.c @@ -0,0 +1,284 @@ +/* + * + * Read FactorySet information from EEPROM into global structure. + * (C) Copyright 2013 Siemens Schweiz AG + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#if !defined(CONFIG_SPL_BUILD) + +#include <common.h> +#include <i2c.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/sys_proto.h> +#include <asm/unaligned.h> +#include <net.h> +#include <usbdescriptors.h> +#include "factoryset.h" + +#define EEPR_PG_SZ 0x80 +#define EEPROM_FATORYSET_OFFSET 0x400 +#define OFF_PG EEPROM_FATORYSET_OFFSET/EEPR_PG_SZ + +/* Global variable that contains necessary information from FactorySet */ +struct factorysetcontainer factory_dat; + +#define fact_get_char(i) *((char *)&eeprom_buf[i]) + +static int fact_match(unsigned char *eeprom_buf, uchar *s1, int i2) +{ + if (s1 == NULL) + return -1; + + while (*s1 == fact_get_char(i2++)) + if (*s1++ == '=') + return i2; + + if (*s1 == '\0' && fact_get_char(i2-1) == '=') + return i2; + + return -1; +} + +static int get_factory_val(unsigned char *eeprom_buf, int size, uchar *name, + uchar *buf, int len) +{ + int i, nxt = 0; + + for (i = 0; fact_get_char(i) != '\0'; i = nxt + 1) { + int val, n; + + for (nxt = i; fact_get_char(nxt) != '\0'; ++nxt) { + if (nxt >= size) + return -1; + } + + val = fact_match(eeprom_buf, (uchar *)name, i); + if (val < 0) + continue; + + /* found; copy out */ + for (n = 0; n < len; ++n, ++buf) { + *buf = fact_get_char(val++); + if (*buf == '\0') + return n; + } + + if (n) + *--buf = '\0'; + + printf("env_buf [%d bytes] too small for value of \"%s\"\n", + len, name); + + return n; + } + return -1; +} + +static +int get_factory_record_val(unsigned char *eeprom_buf, int size, uchar *record, + uchar *name, uchar *buf, int len) +{ + int ret = -1; + int i, nxt = 0; + int c; + unsigned char end = 0xff; + + for (i = 0; fact_get_char(i) != end; i = nxt) { + nxt = i + 1; + if (fact_get_char(i) == '>') { + int pos; + int endpos; + int z; + + c = strncmp((char *)&eeprom_buf[i + 1], (char *)record, + strlen((char *)record)); + if (c == 0) { + /* record found */ + pos = i + strlen((char *)record) + 2; + nxt = pos; + /* search for "<" */ + c = -1; + for (z = pos; fact_get_char(z) != end; z++) { + if ((fact_get_char(z) == '<') || + (fact_get_char(z) == '>')) { + endpos = z; + nxt = endpos; + c = 0; + break; + } + } + } + if (c == 0) { + /* end found -> call get_factory_val */ + eeprom_buf[endpos] = end; + ret = get_factory_val(&eeprom_buf[pos], + size - pos, name, buf, len); + /* fix buffer */ + eeprom_buf[endpos] = '<'; + debug("%s: %s.%s = %s\n", + __func__, record, name, buf); + return ret; + } + } + } + return ret; +} + +int factoryset_read_eeprom(int i2c_addr) +{ + int i, pages = 0, size = 0; + unsigned char eeprom_buf[0x3c00], hdr[4], buf[MAX_STRING_LENGTH]; + unsigned char *cp, *cp1; + +#if defined(CONFIG_DFU_FUNCTION) + factory_dat.usb_vendor_id = CONFIG_G_DNL_VENDOR_NUM; + factory_dat.usb_product_id = CONFIG_G_DNL_PRODUCT_NUM; +#endif + if (i2c_probe(i2c_addr)) + goto err; + + if (i2c_read(i2c_addr, EEPROM_FATORYSET_OFFSET, 2, hdr, sizeof(hdr))) + goto err; + + if ((hdr[0] != 0x99) || (hdr[1] != 0x80)) { + printf("FactorySet is not right in eeprom.\n"); + return 1; + } + + /* get FactorySet size */ + size = (hdr[2] << 8) + hdr[3] + sizeof(hdr); + if (size > 0x3bfa) + size = 0x3bfa; + + pages = size / EEPR_PG_SZ; + + /* + * read the eeprom using i2c + * I can not read entire eeprom in once, so separate into several + * times. Furthermore, fetch eeprom take longer time, so we fetch + * data after every time we got a record from eeprom + */ + debug("Read eeprom page :\n"); + for (i = 0; i < pages; i++) + if (i2c_read(i2c_addr, (OFF_PG + i) * EEPR_PG_SZ, 2, + eeprom_buf + (i * EEPR_PG_SZ), EEPR_PG_SZ)) + goto err; + + if (size % EEPR_PG_SZ) + if (i2c_read(i2c_addr, (OFF_PG + pages) * EEPR_PG_SZ, 2, + eeprom_buf + (pages * EEPR_PG_SZ), + (size % EEPR_PG_SZ))) + goto err; + + /* we do below just for eeprom align */ + for (i = 0; i < size; i++) + if (eeprom_buf[i] == '\n') + eeprom_buf[i] = 0; + + /* skip header */ + size -= sizeof(hdr); + cp = (uchar *)eeprom_buf + sizeof(hdr); + + /* get mac address */ + get_factory_record_val(cp, size, (uchar *)"ETH1", (uchar *)"mac", + buf, MAX_STRING_LENGTH); + cp1 = buf; + for (i = 0; i < 6; i++) { + factory_dat.mac[i] = simple_strtoul((char *)cp1, NULL, 16); + cp1 += 3; + } + +#if defined(CONFIG_DFU_FUNCTION) + /* read vid and pid for dfu mode */ + if (0 <= get_factory_record_val(cp, size, (uchar *)"USBD1", + (uchar *)"vid", buf, + MAX_STRING_LENGTH)) { + factory_dat.usb_vendor_id = simple_strtoul((char *)buf, + NULL, 16); + } + + if (0 <= get_factory_record_val(cp, size, (uchar *)"USBD1", + (uchar *)"pid", buf, + MAX_STRING_LENGTH)) { + factory_dat.usb_product_id = simple_strtoul((char *)buf, + NULL, 16); + } + printf("DFU USB: VID = 0x%4x, PID = 0x%4x\n", factory_dat.usb_vendor_id, + factory_dat.usb_product_id); +#endif + if (0 <= get_factory_record_val(cp, size, (uchar *)"DEV", + (uchar *)"id", buf, + MAX_STRING_LENGTH)) { + if (strncmp((const char *)buf, "PXM50", 5) == 0) + factory_dat.pxm50 = 1; + else + factory_dat.pxm50 = 0; + } + debug("PXM50: %d\n", factory_dat.pxm50); +#if defined(CONFIG_VIDEO) + if (0 <= get_factory_record_val(cp, size, (uchar *)"DISP1", + (uchar *)"name", factory_dat.disp_name, + MAX_STRING_LENGTH)) { + debug("display name: %s\n", factory_dat.disp_name); + } + +#endif + return 0; + +err: + printf("Could not read the EEPROM; something fundamentally wrong on the I2C bus.\n"); + return 1; +} + +static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; + +static int factoryset_mac_setenv(void) +{ + uint8_t mac_addr[6]; + + debug("FactorySet: Set mac address\n"); + if (is_valid_ether_addr(factory_dat.mac)) { + memcpy(mac_addr, factory_dat.mac, 6); + } else { + uint32_t mac_hi, mac_lo; + + debug("Warning: FactorySet: <ethaddr> not set. Fallback to E-fuse\n"); + mac_lo = readl(&cdev->macid0l); + mac_hi = readl(&cdev->macid0h); + + mac_addr[0] = mac_hi & 0xFF; + mac_addr[1] = (mac_hi & 0xFF00) >> 8; + mac_addr[2] = (mac_hi & 0xFF0000) >> 16; + mac_addr[3] = (mac_hi & 0xFF000000) >> 24; + mac_addr[4] = mac_lo & 0xFF; + mac_addr[5] = (mac_lo & 0xFF00) >> 8; + if (!is_valid_ether_addr(mac_addr)) { + printf("Warning: ethaddr not set by FactorySet or E-fuse. Set <ethaddr> variable to overcome this.\n"); + return -1; + } + } + + eth_setenv_enetaddr("ethaddr", mac_addr); + return 0; +} + +int factoryset_setenv(void) +{ + int ret = 0; + + if (factoryset_mac_setenv() < 0) + ret = -1; + + return ret; +} + +int g_dnl_bind_fixup(struct usb_device_descriptor *dev) +{ + put_unaligned(factory_dat.usb_vendor_id, &dev->idVendor); + put_unaligned(factory_dat.usb_product_id, &dev->idProduct); + return 0; +} +#endif /* defined(CONFIG_SPL_BUILD) */ diff --git a/board/siemens/common/factoryset.h b/board/siemens/common/factoryset.h new file mode 100644 index 0000000..445f384 --- /dev/null +++ b/board/siemens/common/factoryset.h @@ -0,0 +1,27 @@ +/* + * Common board functions for siemens AM335X based boards + * (C) Copyright 2013 Siemens Schweiz AG + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __FACTORYSET_H +#define __FACTORYSET_H + +#define MAX_STRING_LENGTH 32 + +struct factorysetcontainer { + uchar mac[6]; + int usb_vendor_id; + int usb_product_id; + int pxm50; +#if defined(CONFIG_VIDEO) + unsigned char disp_name[MAX_STRING_LENGTH]; +#endif +}; + +int factoryset_read_eeprom(int i2c_addr); +int factoryset_setenv(void); +extern struct factorysetcontainer factory_dat; + +#endif /* __FACTORYSET_H */ diff --git a/board/siemens/dxr2/Makefile b/board/siemens/dxr2/Makefile new file mode 100644 index 0000000..a09b467 --- /dev/null +++ b/board/siemens/dxr2/Makefile @@ -0,0 +1,49 @@ +# +# Makefile +# +# (C) Copyright 2013 Siemens Schweiz AG +# (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. +# +# Based on: +# u-boot:/board/ti/am335x/Makefile +# Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif + +LIB = $(obj)lib$(BOARD).o + +ifdef CONFIG_SPL_BUILD +COBJS := mux.o +endif + +COBJS += board.o +ifndef CONFIG_SPL_BUILD +COBJS += ../common/factoryset.o +endif +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS) $(SOBJS)) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/siemens/dxr2/board.c b/board/siemens/dxr2/board.c new file mode 100644 index 0000000..af9d84f --- /dev/null +++ b/board/siemens/dxr2/board.c @@ -0,0 +1,241 @@ +/* + * Board functions for TI AM335X based dxr2 board + * (C) Copyright 2013 Siemens Schweiz AG + * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Based on: + * + * Board functions for TI AM335X based boards + * u-boot:/board/ti/am335x/board.c + * + * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <errno.h> +#include <spl.h> +#include <asm/arch/cpu.h> +#include <asm/arch/hardware.h> +#include <asm/arch/omap.h> +#include <asm/arch/ddr_defs.h> +#include <asm/arch/clock.h> +#include <asm/arch/gpio.h> +#include <asm/arch/mmc_host_def.h> +#include <asm/arch/sys_proto.h> +#include <asm/io.h> +#include <asm/emif.h> +#include <asm/gpio.h> +#include <i2c.h> +#include <miiphy.h> +#include <cpsw.h> +#include <watchdog.h> +#include "board.h" +#include "../common/factoryset.h" + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_SPL_BUILD +static struct dxr2_baseboard_id __attribute__((section(".data"))) settings; + +const struct ddr3_data ddr3_default = { + 0x33524444, 0x56312e33, 0x0100, 0x0001, 0x003A, 0x008A, 0x010B, + 0x00C4, 0x0888A39B, 0x26247FDA, 0x501F821F, 0x0006, 0x61C04AB2, + 0x00000618, +}; + +static void set_default_ddr3_timings(void) +{ + printf("Set default DDR3 settings\n"); + settings.ddr3 = ddr3_default; +} + +static void print_ddr3_timings(void) +{ + printf("\n\nDDR3 Timing parameters:\n"); + printf("Diff Eeprom Default\n"); + PRINTARGS(magic); + PRINTARGS(version); + PRINTARGS(ddr3_sratio); + PRINTARGS(iclkout); + + PRINTARGS(dt0rdsratio0); + PRINTARGS(dt0wdsratio0); + PRINTARGS(dt0fwsratio0); + PRINTARGS(dt0wrsratio0); + + PRINTARGS(sdram_tim1); + PRINTARGS(sdram_tim2); + PRINTARGS(sdram_tim3); + + PRINTARGS(emif_ddr_phy_ctlr_1); + + PRINTARGS(sdram_config); + PRINTARGS(ref_ctrl); +} + +static void print_chip_data(void) +{ + printf("\n"); + printf("Device: '%s'\n", settings.chip.sdevname); + printf("HW version: '%s'\n", settings.chip.shwver); +} +#endif /* CONFIG_SPL_BUILD */ + +/* + * Read header information from EEPROM into global structure. + */ +static int read_eeprom(void) +{ + /* Check if baseboard eeprom is available */ + if (i2c_probe(CONFIG_SYS_I2C_EEPROM_ADDR)) { + printf("Could not probe the EEPROM; something fundamentally wrong on the I2C bus.\n"); + return 1; + } + +#ifdef CONFIG_SPL_BUILD + /* Read Siemens eeprom data (DDR3) */ + if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, EEPROM_ADDR_DDR3, 2, + (uchar *)&settings.ddr3, sizeof(struct ddr3_data))) { + printf("Could not read the EEPROM; something fundamentally wrong on the I2C bus.\nUse default DDR3 timings\n"); + set_default_ddr3_timings(); + } + /* Read Siemens eeprom data (CHIP) */ + if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, EEPROM_ADDR_CHIP, 2, + (uchar *)&settings.chip, sizeof(settings.chip))) + printf("Could not read chip settings\n"); + + if (ddr3_default.magic == settings.ddr3.magic && + ddr3_default.version == settings.ddr3.version) { + printf("Using DDR3 settings from EEPROM\n"); + } else { + if (ddr3_default.magic != settings.ddr3.magic) + printf("Error: No valid DDR3 data in eeprom.\n"); + if (ddr3_default.version != settings.ddr3.version) + printf("Error: DDR3 data version does not match.\n"); + + printf("Using default settings\n"); + set_default_ddr3_timings(); + } + + if (MAGIC_CHIP == settings.chip.magic) { + printf("Valid chip data in eeprom\n"); + print_chip_data(); + } else { + printf("Error: No chip data in eeprom\n"); + } + + print_ddr3_timings(); +#endif + return 0; +} + +#ifdef CONFIG_SPL_BUILD +static void board_init_ddr(void) +{ +struct emif_regs dxr2_ddr3_emif_reg_data = { + .zq_config = 0x50074BE4, +}; + +struct ddr_data dxr2_ddr3_data = { + .datadldiff0 = PHY_DLL_LOCK_DIFF, +}; + +struct cmd_control dxr2_ddr3_cmd_ctrl_data = { + .cmd0dldiff = 0, + .cmd1dldiff = 0, + .cmd2dldiff = 0, +}; + /* pass values from eeprom */ + dxr2_ddr3_emif_reg_data.sdram_tim1 = settings.ddr3.sdram_tim1; + dxr2_ddr3_emif_reg_data.sdram_tim2 = settings.ddr3.sdram_tim2; + dxr2_ddr3_emif_reg_data.sdram_tim3 = settings.ddr3.sdram_tim3; + dxr2_ddr3_emif_reg_data.emif_ddr_phy_ctlr_1 = + settings.ddr3.emif_ddr_phy_ctlr_1; + dxr2_ddr3_emif_reg_data.sdram_config = settings.ddr3.sdram_config; + dxr2_ddr3_emif_reg_data.ref_ctrl = settings.ddr3.ref_ctrl; + + dxr2_ddr3_data.datardsratio0 = settings.ddr3.dt0rdsratio0; + dxr2_ddr3_data.datawdsratio0 = settings.ddr3.dt0wdsratio0; + dxr2_ddr3_data.datafwsratio0 = settings.ddr3.dt0fwsratio0; + dxr2_ddr3_data.datawrsratio0 = settings.ddr3.dt0wrsratio0; + + dxr2_ddr3_cmd_ctrl_data.cmd0csratio = settings.ddr3.ddr3_sratio; + dxr2_ddr3_cmd_ctrl_data.cmd0iclkout = settings.ddr3.iclkout; + dxr2_ddr3_cmd_ctrl_data.cmd1csratio = settings.ddr3.ddr3_sratio; + dxr2_ddr3_cmd_ctrl_data.cmd1iclkout = settings.ddr3.iclkout; + dxr2_ddr3_cmd_ctrl_data.cmd2csratio = settings.ddr3.ddr3_sratio; + dxr2_ddr3_cmd_ctrl_data.cmd2iclkout = settings.ddr3.iclkout; + + config_ddr(DDR_PLL_FREQ, DXR2_IOCTRL_VAL, &dxr2_ddr3_data, + &dxr2_ddr3_cmd_ctrl_data, &dxr2_ddr3_emif_reg_data, 0); +} + +static void spl_siemens_board_init(void) +{ + return; +} +#endif /* if def CONFIG_SPL_BUILD */ + +#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ + (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD)) +static void cpsw_control(int enabled) +{ + /* VTP can be added here */ + + return; +} + +static struct cpsw_slave_data cpsw_slaves[] = { + { + .slave_reg_ofs = 0x208, + .sliver_reg_ofs = 0xd80, + .phy_id = 0, + .phy_if = PHY_INTERFACE_MODE_MII, + }, +}; + +static struct cpsw_platform_data cpsw_data = { + .mdio_base = CPSW_MDIO_BASE, + .cpsw_base = CPSW_BASE, + .mdio_div = 0xff, + .channels = 4, + .cpdma_reg_ofs = 0x800, + .slaves = 1, + .slave_data = cpsw_slaves, + .ale_reg_ofs = 0xd00, + .ale_entries = 1024, + .host_port_reg_ofs = 0x108, + .hw_stats_reg_ofs = 0x900, + .bd_ram_ofs = 0x2000, + .mac_control = (1 << 5), + .control = cpsw_control, + .host_port_num = 0, + .version = CPSW_CTRL_VERSION_2, +}; + +#if defined(CONFIG_DRIVER_TI_CPSW) || \ + (defined(CONFIG_USB_ETHER) && defined(CONFIG_MUSB_GADGET)) +int board_eth_init(bd_t *bis) +{ + struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; + int n = 0; + int rv; + + factoryset_setenv(); + + /* Set rgmii mode and enable rmii clock to be sourced from chip */ + writel((RMII_MODE_ENABLE | RMII_CHIPCKL_ENABLE), &cdev->miisel); + + rv = cpsw_register(&cpsw_data); + if (rv < 0) + printf("Error %d registering CPSW switch\n", rv); + else + n += rv; + return n; +} +#endif /* #if defined(CONFIG_DRIVER_TI_CPSW) */ +#endif /* #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) */ + +#include "../common/board.c" diff --git a/board/siemens/dxr2/board.h b/board/siemens/dxr2/board.h new file mode 100644 index 0000000..2be78fb --- /dev/null +++ b/board/siemens/dxr2/board.h @@ -0,0 +1,69 @@ +/* + * board.h + * + * (C) Copyright 2013 Siemens Schweiz AG + * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Based on: + * TI AM335x boards information header + * u-boot:/board/ti/am335x/board.h + * + * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _BOARD_H_ +#define _BOARD_H_ + +#define PARGS3(x) settings.ddr3.x-ddr3_default.x, \ + settings.ddr3.x, ddr3_default.x +#define PRINTARGS(y) printf("%x, %8x, %8x : "#y"\n", PARGS3(y)) +#define MAGIC_CHIP 0x50494843 + +/* Automatic generated definition */ +/* Wed, 19 Jun 2013 10:57:48 +0200 */ +/* From file: draco/ddr3-data-micron.txt */ +struct ddr3_data { + unsigned int magic; /* 0x33524444 */ + unsigned int version; /* 0x56312e33 */ + unsigned short int ddr3_sratio; /* 0x0100 */ + unsigned short int iclkout; /* 0x0001 */ + unsigned short int dt0rdsratio0; /* 0x003A */ + unsigned short int dt0wdsratio0; /* 0x008A */ + unsigned short int dt0fwsratio0; /* 0x010B */ + unsigned short int dt0wrsratio0; /* 0x00C4 */ + unsigned int sdram_tim1; /* 0x0888A39B */ + unsigned int sdram_tim2; /* 0x26247FDA */ + unsigned int sdram_tim3; /* 0x501F821F */ + unsigned short int emif_ddr_phy_ctlr_1; /* 0x0006 */ + unsigned int sdram_config; /* 0x61C04AB2 */ + unsigned int ref_ctrl; /* 0x00000618 */ +}; + +struct chip_data { + unsigned int magic; + char sdevname[16]; + char shwver[7]; +}; + +struct dxr2_baseboard_id { + struct ddr3_data ddr3; + struct chip_data chip; +}; + +/* + * We have three pin mux functions that must exist. We must be able to enable + * uart0, for initial output and i2c0 to read the main EEPROM. We then have a + * main pinmux function that can be overridden to enable all other pinmux that + * is required on the board. + */ +void enable_uart0_pin_mux(void); +void enable_uart1_pin_mux(void); +void enable_uart2_pin_mux(void); +void enable_uart3_pin_mux(void); +void enable_uart4_pin_mux(void); +void enable_uart5_pin_mux(void); +void enable_i2c0_pin_mux(void); +void enable_board_pin_mux(void); +#endif diff --git a/board/siemens/dxr2/mux.c b/board/siemens/dxr2/mux.c new file mode 100644 index 0000000..bc80b79 --- /dev/null +++ b/board/siemens/dxr2/mux.c @@ -0,0 +1,112 @@ +/* + * pinmux setup for siemens dxr2 board + * + * (C) Copyright 2013 Siemens Schweiz AG + * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Based on: + * u-boot:/board/ti/am335x/mux.c + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/hardware.h> +#include <asm/arch/mux.h> +#include <asm/io.h> +#include <i2c.h> +#include "board.h" + +static struct module_pin_mux uart0_pin_mux[] = { + {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */ + {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */ + {-1}, +}; + +static struct module_pin_mux uart3_pin_mux[] = { + {OFFSET(spi0_cs1), (MODE(1) | PULLUP_EN | RXACTIVE)}, /* UART3_RXD */ + {OFFSET(ecap0_in_pwm0_out), (MODE(1) | PULLUDEN)}, /* UART3_TXD */ + {-1}, +}; + +static struct module_pin_mux i2c0_pin_mux[] = { + {OFFSET(i2c0_sda), (MODE(0) | RXACTIVE | + PULLUDEN | SLEWCTRL)}, /* I2C_DATA */ + {OFFSET(i2c0_scl), (MODE(0) | RXACTIVE | + PULLUDEN | SLEWCTRL)}, /* I2C_SCLK */ + {-1}, +}; + +static struct module_pin_mux nand_pin_mux[] = { + {OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD0 */ + {OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD1 */ + {OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD2 */ + {OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD3 */ + {OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD4 */ + {OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD5 */ + {OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD6 */ + {OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD7 */ + {OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */ + {OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)}, /* NAND_WPN */ + {OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)}, /* NAND_CS0 */ + {OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */ + {OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)}, /* NAND_OE */ + {OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)}, /* NAND_WEN */ + {OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)}, /* NAND_BE_CLE */ + {-1}, +}; + +static struct module_pin_mux gpios_pin_mux[] = { + /* DFU button GPIO0_27*/ + {OFFSET(gpmc_ad11), (MODE(7) | PULLUDEN | RXACTIVE)}, + {OFFSET(gpmc_csn3), MODE(7) }, /* LED0 GPIO2_0 */ + {OFFSET(emu0), MODE(7)}, /* LED1 GPIO3_7 */ + {-1}, +}; + +static struct module_pin_mux ethernet_pin_mux[] = { + {OFFSET(mii1_col), (MODE(3) | RXACTIVE)}, + {OFFSET(mii1_crs), (MODE(1) | RXACTIVE)}, + {OFFSET(mii1_rxerr), (MODE(1) | RXACTIVE)}, + {OFFSET(mii1_txen), (MODE(1))}, + {OFFSET(mii1_rxdv), (MODE(3) | RXACTIVE)}, + {OFFSET(mii1_txd3), (MODE(7) | RXACTIVE)}, + {OFFSET(mii1_txd2), (MODE(7) | RXACTIVE)}, + {OFFSET(mii1_txd1), (MODE(1))}, + {OFFSET(mii1_txd0), (MODE(1))}, + {OFFSET(mii1_txclk), (MODE(1) | RXACTIVE)}, + {OFFSET(mii1_rxclk), (MODE(1) | RXACTIVE)}, + {OFFSET(mii1_rxd3), (MODE(1) | RXACTIVE)}, + {OFFSET(mii1_rxd2), (MODE(1))}, + {OFFSET(mii1_rxd1), (MODE(1) | RXACTIVE)}, + {OFFSET(mii1_rxd0), (MODE(1) | RXACTIVE)}, + {OFFSET(rmii1_refclk), (MODE(0) | RXACTIVE)}, + {OFFSET(mdio_data), (MODE(0) | RXACTIVE | PULLUP_EN)}, + {OFFSET(mdio_clk), (MODE(0) | PULLUP_EN)}, + {-1}, +}; + +void enable_uart0_pin_mux(void) +{ + configure_module_pin_mux(uart0_pin_mux); +} + +void enable_uart3_pin_mux(void) +{ + configure_module_pin_mux(uart3_pin_mux); +} + +void enable_i2c0_pin_mux(void) +{ + configure_module_pin_mux(i2c0_pin_mux); +} + +void enable_board_pin_mux(void) +{ + enable_uart3_pin_mux(); + configure_module_pin_mux(nand_pin_mux); + configure_module_pin_mux(ethernet_pin_mux); + configure_module_pin_mux(gpios_pin_mux); +} diff --git a/board/siemens/pxm2/Makefile b/board/siemens/pxm2/Makefile new file mode 100644 index 0000000..a09b467 --- /dev/null +++ b/board/siemens/pxm2/Makefile @@ -0,0 +1,49 @@ +# +# Makefile +# +# (C) Copyright 2013 Siemens Schweiz AG +# (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. +# +# Based on: +# u-boot:/board/ti/am335x/Makefile +# Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif + +LIB = $(obj)lib$(BOARD).o + +ifdef CONFIG_SPL_BUILD +COBJS := mux.o +endif + +COBJS += board.o +ifndef CONFIG_SPL_BUILD +COBJS += ../common/factoryset.o +endif +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS) $(SOBJS)) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/siemens/pxm2/board.c b/board/siemens/pxm2/board.c new file mode 100644 index 0000000..2c1841f --- /dev/null +++ b/board/siemens/pxm2/board.c @@ -0,0 +1,429 @@ +/* + * Board functions for TI AM335X based pxm2 board + * (C) Copyright 2013 Siemens Schweiz AG + * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Based on: + * u-boot:/board/ti/am335x/board.c + * + * Board functions for TI AM335X based boards + * + * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <errno.h> +#include <spl.h> +#include <asm/arch/cpu.h> +#include <asm/arch/hardware.h> +#include <asm/arch/omap.h> +#include <asm/arch/ddr_defs.h> +#include <asm/arch/clock.h> +#include <asm/arch/gpio.h> +#include <asm/arch/mmc_host_def.h> +#include <asm/arch/sys_proto.h> +#include "../../../drivers/video/da8xx-fb.h" +#include <asm/io.h> +#include <asm/emif.h> +#include <asm/gpio.h> +#include <i2c.h> +#include <miiphy.h> +#include <cpsw.h> +#include <watchdog.h> +#include "board.h" +#include "../common/factoryset.h" +#include "pmic.h" +#include <nand.h> +#include <bmp_layout.h> + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_SPL_BUILD +static void board_init_ddr(void) +{ +struct emif_regs pxm2_ddr3_emif_reg_data = { + .sdram_config = 0x41805332, + .sdram_tim1 = 0x666b3c9, + .sdram_tim2 = 0x243631ca, + .sdram_tim3 = 0x33f, + .emif_ddr_phy_ctlr_1 = 0x100005, + .zq_config = 0, + .ref_ctrl = 0x81a, +}; + +struct ddr_data pxm2_ddr3_data = { + .datardsratio0 = 0x81204812, + .datawdsratio0 = 0, + .datafwsratio0 = 0x8020080, + .datawrsratio0 = 0x4010040, + .datauserank0delay = 1, + .datadldiff0 = PHY_DLL_LOCK_DIFF, +}; + +struct cmd_control pxm2_ddr3_cmd_ctrl_data = { + .cmd0csratio = 0x80, + .cmd0dldiff = 0, + .cmd0iclkout = 0, + .cmd1csratio = 0x80, + .cmd1dldiff = 0, + .cmd1iclkout = 0, + .cmd2csratio = 0x80, + .cmd2dldiff = 0, + .cmd2iclkout = 0, +}; + + config_ddr(DDR_PLL_FREQ, DXR2_IOCTRL_VAL, &pxm2_ddr3_data, + &pxm2_ddr3_cmd_ctrl_data, &pxm2_ddr3_emif_reg_data, 0); +} + +/* + * voltage switching for MPU frequency switching. + * @module = mpu - 0, core - 1 + * @vddx_op_vol_sel = vdd voltage to set + */ + +#define MPU 0 +#define CORE 1 + +int voltage_update(unsigned int module, unsigned char vddx_op_vol_sel) +{ + uchar buf[4]; + unsigned int reg_offset; + + if (module == MPU) + reg_offset = PMIC_VDD1_OP_REG; + else + reg_offset = PMIC_VDD2_OP_REG; + + /* Select VDDx OP */ + if (i2c_read(PMIC_CTRL_I2C_ADDR, reg_offset, 1, buf, 1)) + return 1; + + buf[0] &= ~PMIC_OP_REG_CMD_MASK; + + if (i2c_write(PMIC_CTRL_I2C_ADDR, reg_offset, 1, buf, 1)) + return 1; + + /* Configure VDDx OP Voltage */ + if (i2c_read(PMIC_CTRL_I2C_ADDR, reg_offset, 1, buf, 1)) + return 1; + + buf[0] &= ~PMIC_OP_REG_SEL_MASK; + buf[0] |= vddx_op_vol_sel; + + if (i2c_write(PMIC_CTRL_I2C_ADDR, reg_offset, 1, buf, 1)) + return 1; + + if (i2c_read(PMIC_CTRL_I2C_ADDR, reg_offset, 1, buf, 1)) + return 1; + + if ((buf[0] & PMIC_OP_REG_SEL_MASK) != vddx_op_vol_sel) + return 1; + + return 0; +} + +#define OSC (V_OSCK/1000000) + +const struct dpll_params dpll_mpu_pxm2 = { + 720, OSC-1, 1, -1, -1, -1, -1}; + +void spl_siemens_board_init(void) +{ + uchar buf[4]; + /* + * pxm2 PMIC code. All boards currently want an MPU voltage + * of 1.2625V and CORE voltage of 1.1375V to operate at + * 720MHz. + */ + if (i2c_probe(PMIC_CTRL_I2C_ADDR)) + return; + + /* VDD1/2 voltage selection register access by control i/f */ + if (i2c_read(PMIC_CTRL_I2C_ADDR, PMIC_DEVCTRL_REG, 1, buf, 1)) + return; + + buf[0] |= PMIC_DEVCTRL_REG_SR_CTL_I2C_SEL_CTL_I2C; + + if (i2c_write(PMIC_CTRL_I2C_ADDR, PMIC_DEVCTRL_REG, 1, buf, 1)) + return; + + /* Frequency switching for OPP 120 */ + if (voltage_update(MPU, PMIC_OP_REG_SEL_1_2_6) || + voltage_update(CORE, PMIC_OP_REG_SEL_1_1_3)) { + printf("voltage update failed\n"); + } +} +#endif /* if def CONFIG_SPL_BUILD */ + +int read_eeprom(void) +{ + /* nothing ToDo here for this board */ + + return 0; +} + +#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ + (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD)) +static void cpsw_control(int enabled) +{ + /* VTP can be added here */ + + return; +} + +static struct cpsw_slave_data cpsw_slaves[] = { + { + .slave_reg_ofs = 0x208, + .sliver_reg_ofs = 0xd80, + .phy_id = 0, + .phy_if = PHY_INTERFACE_MODE_RMII, + }, + { + .slave_reg_ofs = 0x308, + .sliver_reg_ofs = 0xdc0, + .phy_id = 1, + .phy_if = PHY_INTERFACE_MODE_RMII, + }, +}; + +static struct cpsw_platform_data cpsw_data = { + .mdio_base = CPSW_MDIO_BASE, + .cpsw_base = CPSW_BASE, + .mdio_div = 0xff, + .channels = 4, + .cpdma_reg_ofs = 0x800, + .slaves = 1, + .slave_data = cpsw_slaves, + .ale_reg_ofs = 0xd00, + .ale_entries = 1024, + .host_port_reg_ofs = 0x108, + .hw_stats_reg_ofs = 0x900, + .bd_ram_ofs = 0x2000, + .mac_control = (1 << 5), + .control = cpsw_control, + .host_port_num = 0, + .version = CPSW_CTRL_VERSION_2, +}; +#endif /* #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) */ + +#if defined(CONFIG_DRIVER_TI_CPSW) || \ + (defined(CONFIG_USB_ETHER) && defined(CONFIG_MUSB_GADGET)) +int board_eth_init(bd_t *bis) +{ + int n = 0; +#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ + (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD)) + struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; +#ifdef CONFIG_FACTORYSET + int rv; + if (!is_valid_ether_addr(factory_dat.mac)) + printf("Error: no valid mac address\n"); + else + eth_setenv_enetaddr("ethaddr", factory_dat.mac); +#endif /* #ifdef CONFIG_FACTORYSET */ + + /* Set rgmii mode and enable rmii clock to be sourced from chip */ + writel(RGMII_MODE_ENABLE , &cdev->miisel); + + rv = cpsw_register(&cpsw_data); + if (rv < 0) + printf("Error %d registering CPSW switch\n", rv); + else + n += rv; +#endif + return n; +} +#endif /* #if defined(CONFIG_DRIVER_TI_CPSW) */ + +#if defined(CONFIG_VIDEO) && !defined(CONFIG_SPL_BUILD) +static struct da8xx_panel lcd_panels[] = { + /* AUO G156XW01 V1 */ + [0] = { + .name = "AUO_G156XW01_V1", + .width = 1376, + .height = 768, + .hfp = 14, + .hbp = 64, + .hsw = 56, + .vfp = 1, + .vbp = 28, + .vsw = 3, + .pxl_clk = 60000000, + .invert_pxl_clk = 0, + }, + /* AUO B101EVN06 V0 */ + [1] = { + .name = "AUO_B101EVN06_V0", + .width = 1280, + .height = 800, + .hfp = 52, + .hbp = 84, + .hsw = 36, + .vfp = 3, + .vbp = 14, + .vsw = 6, + .pxl_clk = 60000000, + .invert_pxl_clk = 0, + }, + /* + * Settings from factoryset + * stored in EEPROM + */ + [2] = { + .name = "factoryset", + .width = 0, + .height = 0, + .hfp = 0, + .hbp = 0, + .hsw = 0, + .vfp = 0, + .vbp = 0, + .vsw = 0, + .pxl_clk = 60000000, + .invert_pxl_clk = 0, + }, +}; + +static const struct display_panel disp_panel = { + WVGA, + 32, + 16, + COLOR_ACTIVE, +}; + +static const struct lcd_ctrl_config lcd_cfg = { + &disp_panel, + .ac_bias = 255, + .ac_bias_intrpt = 0, + .dma_burst_sz = 16, + .bpp = 32, + .fdd = 0x80, + .tft_alt_mode = 0, + .stn_565_mode = 0, + .mono_8bit_mode = 0, + .invert_line_clock = 1, + .invert_frm_clock = 1, + .sync_edge = 0, + .sync_ctrl = 1, + .raster_order = 0, +}; + +static int set_gpio(int gpio, int state) +{ + gpio_request(gpio, "temp"); + gpio_direction_output(gpio, state); + gpio_set_value(gpio, state); + gpio_free(gpio); + return 0; +} + +static int enable_backlight(void) +{ + set_gpio(BOARD_LCD_POWER, 1); + set_gpio(BOARD_BACK_LIGHT, 1); + set_gpio(BOARD_TOUCH_POWER, 1); + return 0; +} + +static int enable_pwm(void) +{ + struct pwmss_regs *pwmss = (struct pwmss_regs *)PWMSS0_BASE; + struct pwmss_ecap_regs *ecap; + int ticks = PWM_TICKS; + int duty = PWM_DUTY; + + ecap = (struct pwmss_ecap_regs *)AM33XX_ECAP0_BASE; + /* enable clock */ + setbits_le32(&pwmss->clkconfig, ECAP_CLK_EN); + /* TimeStam Counter register */ + writel(0xdb9, &ecap->tsctr); + /* config period */ + writel(ticks - 1, &ecap->cap3); + writel(ticks - 1, &ecap->cap1); + setbits_le16(&ecap->ecctl2, + (ECTRL2_MDSL_ECAP | ECTRL2_SYNCOSEL_MASK | 0xd0)); + /* config duty */ + writel(duty, &ecap->cap2); + writel(duty, &ecap->cap4); + /* start */ + setbits_le16(&ecap->ecctl2, ECTRL2_CTRSTP_FREERUN); + return 0; +} + +static struct dpll_regs dpll_lcd_regs = { + .cm_clkmode_dpll = CM_WKUP + 0x98, + .cm_idlest_dpll = CM_WKUP + 0x48, + .cm_clksel_dpll = CM_WKUP + 0x54, +}; + +/* no console on this board */ +int board_cfb_skip(void) +{ + return 1; +} + +#define PLL_GET_M(v) ((v >> 8) & 0x7ff) +#define PLL_GET_N(v) (v & 0x7f) + +static int get_clk(struct dpll_regs *dpll_regs) +{ + unsigned int val; + unsigned int m, n; + int f = 0; + + val = readl(dpll_regs->cm_clksel_dpll); + m = PLL_GET_M(val); + n = PLL_GET_N(val); + f = (m * V_OSCK) / n; + + return f; +}; + +int clk_get(int clk) +{ + return get_clk(&dpll_lcd_regs); +}; + +static int conf_disp_pll(int m, int n) +{ + struct cm_perpll *cmper = (struct cm_perpll *)CM_PER; + struct cm_dpll *cmdpll = (struct cm_dpll *)CM_DPLL; + struct dpll_params dpll_lcd = {m, n, -1, -1, -1, -1, -1}; + + u32 *const clk_domains[] = { + &cmper->lcdclkctrl, + 0 + }; + u32 *const clk_modules_explicit_en[] = { + &cmper->lcdclkctrl, + &cmper->lcdcclkstctrl, + &cmper->epwmss0clkctrl, + 0 + }; + do_enable_clocks(clk_domains, clk_modules_explicit_en, 1); + writel(0x0, &cmdpll->clklcdcpixelclk); + + do_setup_dpll(&dpll_lcd_regs, &dpll_lcd); + + return 0; +} + +static int board_video_init(void) +{ + /* set 300 MHz */ + conf_disp_pll(25, 2); + if (factory_dat.pxm50) + da8xx_video_init(&lcd_panels[0], &lcd_cfg, lcd_cfg.bpp); + else + da8xx_video_init(&lcd_panels[1], &lcd_cfg, lcd_cfg.bpp); + + enable_pwm(); + enable_backlight(); + + return 0; +} +#endif +#include "../common/board.c" diff --git a/board/siemens/pxm2/board.h b/board/siemens/pxm2/board.h new file mode 100644 index 0000000..0362612 --- /dev/null +++ b/board/siemens/pxm2/board.h @@ -0,0 +1,22 @@ +/* + * board.h + * + * (C) Copyright 2013 Siemens Schweiz AG + * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Based on: + * TI AM335x boards information header + * u-boot:/board/ti/am335x/board.h + * + * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _BOARD_H_ +#define _BOARD_H_ + +void enable_uart0_pin_mux(void); +void enable_i2c0_pin_mux(void); +void enable_board_pin_mux(void); +#endif diff --git a/board/siemens/pxm2/mux.c b/board/siemens/pxm2/mux.c new file mode 100644 index 0000000..c64b0d2 --- /dev/null +++ b/board/siemens/pxm2/mux.c @@ -0,0 +1,186 @@ +/* + * pinmux setup for siemens pxm2 board + * + * (C) Copyright 2013 Siemens Schweiz AG + * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Based on: + * u-boot:/board/ti/am335x/mux.c + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/hardware.h> +#include <asm/arch/mux.h> +#include <asm/io.h> +#include <i2c.h> +#include "board.h" + +static struct module_pin_mux uart0_pin_mux[] = { + {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */ + {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */ + {OFFSET(nnmi), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_TXD */ + {-1}, +}; + +#ifdef CONFIG_NAND +static struct module_pin_mux nand_pin_mux[] = { + {OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD0 */ + {OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD1 */ + {OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD2 */ + {OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD3 */ + {OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD4 */ + {OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD5 */ + {OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD6 */ + {OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD7 */ + {OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */ + {OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)}, /* NAND_WPN */ + {OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)}, /* NAND_CS0 */ + {OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */ + {OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)}, /* NAND_OE */ + {OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)}, /* NAND_WEN */ + {OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)}, /* NAND_BE_CLE */ + {OFFSET(gpmc_a11), MODE(7) | RXACTIVE | PULLUP_EN}, /* RGMII2_RD0 */ + {OFFSET(mcasp0_ahclkx), MODE(7) | PULLUDEN}, /* MCASP0_AHCLKX */ + {-1}, +}; +#endif + +static struct module_pin_mux i2c0_pin_mux[] = { + {OFFSET(i2c0_sda), (MODE(0) | RXACTIVE | PULLUDEN | SLEWCTRL)}, + {OFFSET(i2c0_scl), (MODE(0) | RXACTIVE | PULLUDEN | SLEWCTRL)}, + {-1}, +}; + +static struct module_pin_mux i2c1_pin_mux[] = { + {OFFSET(spi0_d1), (MODE(2) | RXACTIVE | PULLUDEN | SLEWCTRL)}, + {OFFSET(spi0_cs0), (MODE(2) | RXACTIVE | PULLUDEN | SLEWCTRL)}, + {-1}, +}; + +#ifndef CONFIG_NO_ETH +static struct module_pin_mux rgmii1_pin_mux[] = { + {OFFSET(mii1_txen), MODE(2)}, /* RGMII1_TCTL */ + {OFFSET(mii1_rxdv), MODE(2) | RXACTIVE}, /* RGMII1_RCTL */ + {OFFSET(mii1_txd3), MODE(2)}, /* RGMII1_TD3 */ + {OFFSET(mii1_txd2), MODE(2)}, /* RGMII1_TD2 */ + {OFFSET(mii1_txd1), MODE(2)}, /* RGMII1_TD1 */ + {OFFSET(mii1_txd0), MODE(2)}, /* RGMII1_TD0 */ + {OFFSET(mii1_txclk), MODE(2)}, /* RGMII1_TCLK */ + {OFFSET(mii1_rxclk), MODE(2) | RXACTIVE}, /* RGMII1_RCLK */ + {OFFSET(mii1_rxd3), MODE(2) | RXACTIVE}, /* RGMII1_RD3 */ + {OFFSET(mii1_rxd2), MODE(2) | RXACTIVE}, /* RGMII1_RD2 */ + {OFFSET(mii1_rxd1), MODE(2) | RXACTIVE}, /* RGMII1_RD1 */ + {OFFSET(mii1_rxd0), MODE(2) | RXACTIVE}, /* RGMII1_RD0 */ + {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, /* MDIO_DATA */ + {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */ + {-1}, +}; + +static struct module_pin_mux rgmii2_pin_mux[] = { + {OFFSET(gpmc_a0), MODE(2)}, /* RGMII2_TCTL */ + {OFFSET(gpmc_a1), MODE(2) | RXACTIVE}, /* RGMII2_RCTL */ + {OFFSET(gpmc_a2), MODE(2)}, /* RGMII2_TD3 */ + {OFFSET(gpmc_a3), MODE(2)}, /* RGMII2_TD2 */ + {OFFSET(gpmc_a4), MODE(2)}, /* RGMII2_TD1 */ + {OFFSET(gpmc_a5), MODE(2)}, /* RGMII2_TD0 */ + {OFFSET(gpmc_a6), MODE(7)}, /* RGMII2_TCLK */ + {OFFSET(gpmc_a7), MODE(2) | RXACTIVE}, /* RGMII2_RCLK */ + {OFFSET(gpmc_a8), MODE(2) | RXACTIVE}, /* RGMII2_RD3 */ + {OFFSET(gpmc_a9), MODE(7)}, /* RGMII2_RD2 */ + {OFFSET(gpmc_a10), MODE(2) | RXACTIVE}, /* RGMII2_RD1 */ + {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, /* MDIO_DATA */ + {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */ + {-1}, +}; +#endif + +#ifdef CONFIG_MMC +static struct module_pin_mux mmc0_pin_mux[] = { + {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */ + {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */ + {OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT1 */ + {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */ + {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */ + {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */ + {OFFSET(mcasp0_aclkr), (MODE(4) | RXACTIVE)}, /* MMC0_WP */ + {OFFSET(spi0_cs1), (MODE(5) | RXACTIVE | PULLUDEN)}, /* MMC0_CD */ + {-1}, +}; +#endif + +static struct module_pin_mux lcdc_pin_mux[] = { + {OFFSET(lcd_data0), (MODE(0) | PULLUDDIS)}, /* LCD_DAT0 */ + {OFFSET(lcd_data1), (MODE(0) | PULLUDDIS)}, /* LCD_DAT1 */ + {OFFSET(lcd_data2), (MODE(0) | PULLUDDIS)}, /* LCD_DAT2 */ + {OFFSET(lcd_data3), (MODE(0) | PULLUDDIS)}, /* LCD_DAT3 */ + {OFFSET(lcd_data4), (MODE(0) | PULLUDDIS)}, /* LCD_DAT4 */ + {OFFSET(lcd_data5), (MODE(0) | PULLUDDIS)}, /* LCD_DAT5 */ + {OFFSET(lcd_data6), (MODE(0) | PULLUDDIS)}, /* LCD_DAT6 */ + {OFFSET(lcd_data7), (MODE(0) | PULLUDDIS)}, /* LCD_DAT7 */ + {OFFSET(lcd_data8), (MODE(0) | PULLUDDIS)}, /* LCD_DAT8 */ + {OFFSET(lcd_data9), (MODE(0) | PULLUDDIS)}, /* LCD_DAT9 */ + {OFFSET(lcd_data10), (MODE(0) | PULLUDDIS)}, /* LCD_DAT10 */ + {OFFSET(lcd_data11), (MODE(0) | PULLUDDIS)}, /* LCD_DAT11 */ + {OFFSET(lcd_data12), (MODE(0) | PULLUDDIS)}, /* LCD_DAT12 */ + {OFFSET(lcd_data13), (MODE(0) | PULLUDDIS)}, /* LCD_DAT13 */ + {OFFSET(lcd_data14), (MODE(0) | PULLUDDIS)}, /* LCD_DAT14 */ + {OFFSET(lcd_data15), (MODE(0) | PULLUDDIS)}, /* LCD_DAT15 */ + {OFFSET(gpmc_ad8), (MODE(1))}, /* LCD_DAT16 */ + {OFFSET(gpmc_ad9), (MODE(1))}, /* LCD_DAT17 */ + {OFFSET(gpmc_ad10), (MODE(1))}, /* LCD_DAT18 */ + {OFFSET(gpmc_ad11), (MODE(1))}, /* LCD_DAT19 */ + {OFFSET(gpmc_ad12), (MODE(1))}, /* LCD_DAT20 */ + {OFFSET(gpmc_ad13), (MODE(1))}, /* LCD_DAT21 */ + {OFFSET(gpmc_ad14), (MODE(1))}, /* LCD_DAT22 */ + {OFFSET(gpmc_ad15), (MODE(1))}, /* LCD_DAT23 */ + {OFFSET(lcd_vsync), (MODE(0))}, /* LCD_VSYNC */ + {OFFSET(lcd_hsync), (MODE(0))}, /* LCD_HSYNC */ + {OFFSET(lcd_pclk), (MODE(0))}, /* LCD_PCLK */ + {OFFSET(lcd_ac_bias_en), (MODE(0))}, /* LCD_AC_BIAS_EN */ + {-1}, +}; + +static struct module_pin_mux ecap0_pin_mux[] = { + {OFFSET(ecap0_in_pwm0_out), (MODE(0))}, + {-1}, +}; + +static struct module_pin_mux gpio_pin_mux[] = { + {OFFSET(mcasp0_fsx), MODE(7)}, /* GPIO3_15 LCD power*/ + {OFFSET(mcasp0_axr0), MODE(7)}, /* GPIO3_16 Backlight */ + {OFFSET(gpmc_a9), MODE(7)}, /* GPIO1_25 Touch power */ + {-1}, +}; +void enable_i2c0_pin_mux(void) +{ + configure_module_pin_mux(i2c0_pin_mux); +} + +void enable_uart0_pin_mux(void) +{ + configure_module_pin_mux(uart0_pin_mux); +} + +void enable_board_pin_mux(void) +{ + configure_module_pin_mux(uart0_pin_mux); + configure_module_pin_mux(i2c1_pin_mux); +#ifdef CONFIG_NAND + configure_module_pin_mux(nand_pin_mux); +#endif +#ifndef CONFIG_NO_ETH + configure_module_pin_mux(rgmii1_pin_mux); + configure_module_pin_mux(rgmii2_pin_mux); +#endif +#ifdef CONFIG_MMC + configure_module_pin_mux(mmc0_pin_mux); +#endif + configure_module_pin_mux(lcdc_pin_mux); + configure_module_pin_mux(gpio_pin_mux); + configure_module_pin_mux(ecap0_pin_mux); +} diff --git a/board/siemens/pxm2/pmic.h b/board/siemens/pxm2/pmic.h new file mode 100644 index 0000000..c6347e5 --- /dev/null +++ b/board/siemens/pxm2/pmic.h @@ -0,0 +1,71 @@ +/* + * (C) Copyright 2013 Siemens Schweiz AG + * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Based on: + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef PMIC_H +#define PMIC_H + +/* + * The PMIC on this board is a TPS65910. + */ + +#define PMIC_SR_I2C_ADDR 0x12 +#define PMIC_CTRL_I2C_ADDR 0x2D +/* PMIC Register offsets */ +#define PMIC_VDD1_REG 0x21 +#define PMIC_VDD1_OP_REG 0x22 +#define PMIC_VDD2_REG 0x24 +#define PMIC_VDD2_OP_REG 0x25 +#define PMIC_DEVCTRL_REG 0x3f + +/* VDD2 & VDD1 control register (VDD2_REG & VDD1_REG) */ +#define PMIC_VGAIN_SEL_MASK (0x3 << 6) +#define PMIC_ILMAX_MASK (0x1 << 5) +#define PMIC_TSTEP_MASK (0x7 << 2) +#define PMIC_ST_MASK (0x3) + +#define PMIC_REG_VGAIN_SEL_X1 (0x0 << 6) +#define PMIC_REG_VGAIN_SEL_X1_0 (0x1 << 6) +#define PMIC_REG_VGAIN_SEL_X3 (0x2 << 6) +#define PMIC_REG_VGAIN_SEL_X4 (0x3 << 6) + +#define PMIC_REG_ILMAX_1_0_A (0x0 << 5) +#define PMIC_REG_ILMAX_1_5_A (0x1 << 5) + +#define PMIC_REG_TSTEP_ (0x0 << 2) +#define PMIC_REG_TSTEP_12_5 (0x1 << 2) +#define PMIC_REG_TSTEP_9_4 (0x2 << 2) +#define PMIC_REG_TSTEP_7_5 (0x3 << 2) +#define PMIC_REG_TSTEP_6_25 (0x4 << 2) +#define PMIC_REG_TSTEP_4_7 (0x5 << 2) +#define PMIC_REG_TSTEP_3_12 (0x6 << 2) +#define PMIC_REG_TSTEP_2_5 (0x7 << 2) + +#define PMIC_REG_ST_OFF (0x0) +#define PMIC_REG_ST_ON_HI_POW (0x1) +#define PMIC_REG_ST_OFF_1 (0x2) +#define PMIC_REG_ST_ON_LOW_POW (0x3) + + +/* VDD2 & VDD1 voltage selection register. (VDD2_OP_REG & VDD1_OP_REG) */ +#define PMIC_OP_REG_SEL (0x7F) + +#define PMIC_OP_REG_CMD_MASK (0x1 << 7) +#define PMIC_OP_REG_CMD_OP (0x0 << 7) +#define PMIC_OP_REG_CMD_SR (0x1 << 7) + +#define PMIC_OP_REG_SEL_MASK (0x7F) +#define PMIC_OP_REG_SEL_1_1_3 (0x2E) /* 1.1375 V */ +#define PMIC_OP_REG_SEL_1_2_6 (0x38) /* 1.2625 V */ + +/* Device control register . (DEVCTRL_REG) */ +#define PMIC_DEVCTRL_REG_SR_CTL_I2C_MASK (0x1 << 4) +#define PMIC_DEVCTRL_REG_SR_CTL_I2C_SEL_SR_I2C (0x0 << 4) +#define PMIC_DEVCTRL_REG_SR_CTL_I2C_SEL_CTL_I2C (0x1 << 4) + +#endif diff --git a/board/siemens/rut/Makefile b/board/siemens/rut/Makefile new file mode 100644 index 0000000..a09b467 --- /dev/null +++ b/board/siemens/rut/Makefile @@ -0,0 +1,49 @@ +# +# Makefile +# +# (C) Copyright 2013 Siemens Schweiz AG +# (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. +# +# Based on: +# u-boot:/board/ti/am335x/Makefile +# Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif + +LIB = $(obj)lib$(BOARD).o + +ifdef CONFIG_SPL_BUILD +COBJS := mux.o +endif + +COBJS += board.o +ifndef CONFIG_SPL_BUILD +COBJS += ../common/factoryset.o +endif +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS) $(SOBJS)) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/siemens/rut/board.c b/board/siemens/rut/board.c new file mode 100644 index 0000000..f2b0476 --- /dev/null +++ b/board/siemens/rut/board.c @@ -0,0 +1,432 @@ +/* + * Board functions for TI AM335X based rut board + * (C) Copyright 2013 Siemens Schweiz AG + * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Based on: + * u-boot:/board/ti/am335x/board.c + * + * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <errno.h> +#include <spi.h> +#include <spl.h> +#include <asm/arch/cpu.h> +#include <asm/arch/hardware.h> +#include <asm/arch/omap.h> +#include <asm/arch/ddr_defs.h> +#include <asm/arch/clock.h> +#include <asm/arch/gpio.h> +#include <asm/arch/mmc_host_def.h> +#include <asm/arch/sys_proto.h> +#include <asm/io.h> +#include <asm/emif.h> +#include <asm/gpio.h> +#include <i2c.h> +#include <miiphy.h> +#include <cpsw.h> +#include <video.h> +#include <watchdog.h> +#include "board.h" +#include "../common/factoryset.h" +#include "../../../drivers/video/da8xx-fb.h" + +DECLARE_GLOBAL_DATA_PTR; + +/* + * Read header information from EEPROM into global structure. + */ +static int read_eeprom(void) +{ + return 0; +} + +#ifdef CONFIG_SPL_BUILD +static void board_init_ddr(void) +{ +struct emif_regs rut_ddr3_emif_reg_data = { + .sdram_config = 0x61C04AB2, + .sdram_tim1 = 0x0888A39B, + .sdram_tim2 = 0x26337FDA, + .sdram_tim3 = 0x501F830F, + .emif_ddr_phy_ctlr_1 = 0x6, + .zq_config = 0x50074BE4, + .ref_ctrl = 0x93B, +}; + +struct ddr_data rut_ddr3_data = { + .datardsratio0 = 0x3b, + .datawdsratio0 = 0x85, + .datafwsratio0 = 0x100, + .datawrsratio0 = 0xc1, + .datauserank0delay = 1, + .datadldiff0 = PHY_DLL_LOCK_DIFF, +}; + +struct cmd_control rut_ddr3_cmd_ctrl_data = { + .cmd0csratio = 0x40, + .cmd0dldiff = 0, + .cmd0iclkout = 1, + .cmd1csratio = 0x40, + .cmd1dldiff = 0, + .cmd1iclkout = 1, + .cmd2csratio = 0x40, + .cmd2dldiff = 0, + .cmd2iclkout = 1, +}; + + config_ddr(DDR_PLL_FREQ, RUT_IOCTRL_VAL, &rut_ddr3_data, + &rut_ddr3_cmd_ctrl_data, &rut_ddr3_emif_reg_data, 0); +} + +static void spl_siemens_board_init(void) +{ + return; +} +#endif /* if def CONFIG_SPL_BUILD */ + +#if defined(CONFIG_DRIVER_TI_CPSW) +static void cpsw_control(int enabled) +{ + /* VTP can be added here */ + + return; +} + +static struct cpsw_slave_data cpsw_slaves[] = { + { + .slave_reg_ofs = 0x208, + .sliver_reg_ofs = 0xd80, + .phy_id = 1, + .phy_if = PHY_INTERFACE_MODE_RMII, + }, + { + .slave_reg_ofs = 0x308, + .sliver_reg_ofs = 0xdc0, + .phy_id = 0, + .phy_if = PHY_INTERFACE_MODE_RMII, + }, +}; + +static struct cpsw_platform_data cpsw_data = { + .mdio_base = CPSW_MDIO_BASE, + .cpsw_base = CPSW_BASE, + .mdio_div = 0xff, + .channels = 8, + .cpdma_reg_ofs = 0x800, + .slaves = 1, + .slave_data = cpsw_slaves, + .ale_reg_ofs = 0xd00, + .ale_entries = 1024, + .host_port_reg_ofs = 0x108, + .hw_stats_reg_ofs = 0x900, + .bd_ram_ofs = 0x2000, + .mac_control = (1 << 5), + .control = cpsw_control, + .host_port_num = 0, + .version = CPSW_CTRL_VERSION_2, +}; + +#if defined(CONFIG_DRIVER_TI_CPSW) || \ + (defined(CONFIG_USB_ETHER) && defined(CONFIG_MUSB_GADGET)) +int board_eth_init(bd_t *bis) +{ + struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; + int n = 0; + int rv; + +#ifndef CONFIG_SPL_BUILD + factoryset_setenv(); +#endif + + /* Set rgmii mode and enable rmii clock to be sourced from chip */ + writel((RMII_MODE_ENABLE | RMII_CHIPCKL_ENABLE), &cdev->miisel); + + rv = cpsw_register(&cpsw_data); + if (rv < 0) + printf("Error %d registering CPSW switch\n", rv); + else + n += rv; + return n; +} +#endif /* #if defined(CONFIG_DRIVER_TI_CPSW) */ +#endif /* #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) */ + +#if defined(CONFIG_HW_WATCHDOG) +static bool hw_watchdog_init_done; +static int hw_watchdog_trigger_level; + +void hw_watchdog_reset(void) +{ + if (!hw_watchdog_init_done) + return; + + hw_watchdog_trigger_level = hw_watchdog_trigger_level ? 0 : 1; + gpio_set_value(WATCHDOG_TRIGGER_GPIO, hw_watchdog_trigger_level); +} + +void hw_watchdog_init(void) +{ + gpio_request(WATCHDOG_TRIGGER_GPIO, "watchdog_trigger"); + gpio_direction_output(WATCHDOG_TRIGGER_GPIO, hw_watchdog_trigger_level); + + hw_watchdog_reset(); + + hw_watchdog_init_done = 1; +} +#endif /* defined(CONFIG_HW_WATCHDOG) */ + +#if defined(CONFIG_VIDEO) && !defined(CONFIG_SPL_BUILD) +static struct da8xx_panel lcd_panels[] = { + /* FORMIKE, 4.3", 480x800, KWH043MC17-F01 */ + [0] = { + .name = "KWH043MC17-F01", + .width = 480, + .height = 800, + .hfp = 50, /* no spec, "don't care" values */ + .hbp = 50, + .hsw = 50, + .vfp = 50, + .vbp = 50, + .vsw = 50, + .pxl_clk = 35910000, /* tCYCD=20ns, max 50MHz, 60fps */ + .invert_pxl_clk = 1, + }, + /* FORMIKE, 4.3", 480x800, KWH043ST20-F01 */ + [1] = { + .name = "KWH043ST20-F01", + .width = 480, + .height = 800, + .hfp = 50, /* no spec, "don't care" values */ + .hbp = 50, + .hsw = 50, + .vfp = 50, + .vbp = 50, + .vsw = 50, + .pxl_clk = 35910000, /* tCYCD=20ns, max 50MHz, 60fps */ + .invert_pxl_clk = 1, + }, + /* Multi-Inno, 4.3", 480x800, MI0430VT-1 */ + [2] = { + .name = "MI0430VT-1", + .width = 480, + .height = 800, + .hfp = 50, /* no spec, "don't care" values */ + .hbp = 50, + .hsw = 50, + .vfp = 50, + .vbp = 50, + .vsw = 50, + .pxl_clk = 35910000, /* tCYCD=20ns, max 50MHz, 60fps */ + .invert_pxl_clk = 1, + }, +}; + +static const struct display_panel disp_panels[] = { + [0] = { + WVGA, + 16, /* RGB 888 */ + 16, + COLOR_ACTIVE, + }, + [1] = { + WVGA, + 16, /* RGB 888 */ + 16, + COLOR_ACTIVE, + }, + [2] = { + WVGA, + 24, /* RGB 888 */ + 16, + COLOR_ACTIVE, + }, +}; + +static const struct lcd_ctrl_config lcd_cfgs[] = { + [0] = { + &disp_panels[0], + .ac_bias = 255, + .ac_bias_intrpt = 0, + .dma_burst_sz = 16, + .bpp = 16, + .fdd = 0x80, + .tft_alt_mode = 0, + .stn_565_mode = 0, + .mono_8bit_mode = 0, + .invert_line_clock = 1, + .invert_frm_clock = 1, + .sync_edge = 0, + .sync_ctrl = 1, + .raster_order = 0, + }, + [1] = { + &disp_panels[1], + .ac_bias = 255, + .ac_bias_intrpt = 0, + .dma_burst_sz = 16, + .bpp = 16, + .fdd = 0x80, + .tft_alt_mode = 0, + .stn_565_mode = 0, + .mono_8bit_mode = 0, + .invert_line_clock = 1, + .invert_frm_clock = 1, + .sync_edge = 0, + .sync_ctrl = 1, + .raster_order = 0, + }, + [2] = { + &disp_panels[2], + .ac_bias = 255, + .ac_bias_intrpt = 0, + .dma_burst_sz = 16, + .bpp = 24, + .fdd = 0x80, + .tft_alt_mode = 0, + .stn_565_mode = 0, + .mono_8bit_mode = 0, + .invert_line_clock = 1, + .invert_frm_clock = 1, + .sync_edge = 0, + .sync_ctrl = 1, + .raster_order = 0, + }, + +}; + +/* no console on this board */ +int board_cfb_skip(void) +{ + return 1; +} + +#define PLL_GET_M(v) ((v >> 8) & 0x7ff) +#define PLL_GET_N(v) (v & 0x7f) + +static struct dpll_regs dpll_lcd_regs = { + .cm_clkmode_dpll = CM_WKUP + 0x98, + .cm_idlest_dpll = CM_WKUP + 0x48, + .cm_clksel_dpll = CM_WKUP + 0x54, +}; + +static int get_clk(struct dpll_regs *dpll_regs) +{ + unsigned int val; + unsigned int m, n; + int f = 0; + + val = readl(dpll_regs->cm_clksel_dpll); + m = PLL_GET_M(val); + n = PLL_GET_N(val); + f = (m * V_OSCK) / n; + + return f; +}; + + + +int clk_get(int clk) +{ + return get_clk(&dpll_lcd_regs); +}; + +static int conf_disp_pll(int m, int n) +{ + struct cm_perpll *cmper = (struct cm_perpll *)CM_PER; + struct cm_dpll *cmdpll = (struct cm_dpll *)CM_DPLL; + struct dpll_params dpll_lcd = {m, n, -1, -1, -1, -1, -1}; +#if defined(DISPL_PLL_SPREAD_SPECTRUM) + struct cm_wkuppll *cmwkup = (struct cm_wkuppll *)CM_WKUP; +#endif + + u32 *const clk_domains[] = { + &cmper->lcdclkctrl, + 0 + }; + u32 *const clk_modules_explicit_en[] = { + &cmper->lcdclkctrl, + &cmper->lcdcclkstctrl, + &cmper->spi1clkctrl, + 0 + }; + do_enable_clocks(clk_domains, clk_modules_explicit_en, 1); + /* 0x44e0_0500 write lcdc pixel clock mux Linux hat hier 0 */ + writel(0x0, &cmdpll->clklcdcpixelclk); + + do_setup_dpll(&dpll_lcd_regs, &dpll_lcd); + +#if defined(DISPL_PLL_SPREAD_SPECTRUM) + writel(0x64, &cmwkup->resv6[3]); /* 0x50 */ + writel(0x800, &cmwkup->resv6[2]); /* 0x4c */ + writel(readl(&cmwkup->clkmoddplldisp) | (1 << 12), + &cmwkup->clkmoddplldisp); /* 0x98 */ +#endif + return 0; +} + +static int set_gpio(int gpio, int state) +{ + gpio_request(gpio, "temp"); + gpio_direction_output(gpio, state); + gpio_set_value(gpio, state); + gpio_free(gpio); + return 0; +} + +static int enable_lcd(void) +{ + unsigned char buf[1]; + + set_gpio(BOARD_LCD_RESET, 1); + + /* spi lcd init */ + kwh043st20_f01_spi_startup(1, 0, 5000000, SPI_MODE_3); + + /* backlight on */ + buf[0] = 0xf; + i2c_write(0x24, 0x7, 1, buf, 1); + buf[0] = 0x3f; + i2c_write(0x24, 0x8, 1, buf, 1); + return 0; +} + +int arch_early_init_r(void) +{ + enable_lcd(); + return 0; +} + +static int board_video_init(void) +{ + int i; + int anzdisp = ARRAY_SIZE(lcd_panels); + int display = 1; + + for (i = 0; i < anzdisp; i++) { + if (strncmp((const char *)factory_dat.disp_name, + lcd_panels[i].name, + strlen((const char *)factory_dat.disp_name)) == 0) { + printf("DISPLAY: %s\n", factory_dat.disp_name); + break; + } + } + if (i == anzdisp) { + i = 1; + printf("%s: %s not found, using default %s\n", __func__, + factory_dat.disp_name, lcd_panels[i].name); + } + conf_disp_pll(25, 2); + da8xx_video_init(&lcd_panels[display], &lcd_cfgs[display], + lcd_cfgs[display].bpp); + + return 0; +} + + +#endif /* ifdef CONFIG_VIDEO */ +#include "../common/board.c" diff --git a/board/siemens/rut/board.h b/board/siemens/rut/board.h new file mode 100644 index 0000000..0362612 --- /dev/null +++ b/board/siemens/rut/board.h @@ -0,0 +1,22 @@ +/* + * board.h + * + * (C) Copyright 2013 Siemens Schweiz AG + * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Based on: + * TI AM335x boards information header + * u-boot:/board/ti/am335x/board.h + * + * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _BOARD_H_ +#define _BOARD_H_ + +void enable_uart0_pin_mux(void); +void enable_i2c0_pin_mux(void); +void enable_board_pin_mux(void); +#endif diff --git a/board/siemens/rut/mux.c b/board/siemens/rut/mux.c new file mode 100644 index 0000000..1eced01 --- /dev/null +++ b/board/siemens/rut/mux.c @@ -0,0 +1,347 @@ +/* + * pinmux setup for siemens rut board + * + * (C) Copyright 2013 Siemens Schweiz AG + * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Based on: + * u-boot:/board/ti/am335x/mux.c + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/hardware.h> +#include <asm/arch/mux.h> +#include <asm/io.h> +#include <i2c.h> + +static struct module_pin_mux uart0_pin_mux[] = { + {OFFSET(uart0_rxd), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* UART0_RXD */ + {OFFSET(uart0_txd), (MODE(0) | PULLUDDIS)}, /* UART0_TXD */ + {-1}, +}; + +static struct module_pin_mux ddr_pin_mux[] = { + {OFFSET(ddr_resetn), (MODE(0))}, + {OFFSET(ddr_csn0), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_ck), (MODE(0))}, + {OFFSET(ddr_nck), (MODE(0))}, + {OFFSET(ddr_casn), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_rasn), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_wen), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_ba0), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_ba1), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_ba2), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_a0), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_a1), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_a2), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_a3), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_a4), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_a5), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_a6), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_a7), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_a8), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_a9), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_a10), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_a11), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_a12), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_a13), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_a14), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_a15), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_odt), (MODE(0))}, + {OFFSET(ddr_d0), (MODE(0) | RXACTIVE)}, + {OFFSET(ddr_d1), (MODE(0) | RXACTIVE)}, + {OFFSET(ddr_d2), (MODE(0) | RXACTIVE)}, + {OFFSET(ddr_d3), (MODE(0) | RXACTIVE)}, + {OFFSET(ddr_d4), (MODE(0) | RXACTIVE)}, + {OFFSET(ddr_d5), (MODE(0) | RXACTIVE)}, + {OFFSET(ddr_d6), (MODE(0) | RXACTIVE)}, + {OFFSET(ddr_d7), (MODE(0) | RXACTIVE)}, + {OFFSET(ddr_d8), (MODE(0) | RXACTIVE)}, + {OFFSET(ddr_d9), (MODE(0) | RXACTIVE)}, + {OFFSET(ddr_d10), (MODE(0) | RXACTIVE)}, + {OFFSET(ddr_d11), (MODE(0) | RXACTIVE)}, + {OFFSET(ddr_d12), (MODE(0) | RXACTIVE)}, + {OFFSET(ddr_d13), (MODE(0) | RXACTIVE)}, + {OFFSET(ddr_d14), (MODE(0) | RXACTIVE)}, + {OFFSET(ddr_d15), (MODE(0) | RXACTIVE)}, + {OFFSET(ddr_dqm0), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_dqm1), (MODE(0) | PULLUP_EN)}, + {OFFSET(ddr_dqs0), (MODE(0) | RXACTIVE)}, + {OFFSET(ddr_dqsn0), (MODE(0) | RXACTIVE | PULLUP_EN)}, + {OFFSET(ddr_dqs1), (MODE(0) | RXACTIVE)}, + {OFFSET(ddr_dqsn1), (MODE(0) | RXACTIVE | PULLUP_EN)}, + {OFFSET(ddr_vref), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(ddr_vtp), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {-1}, +}; + +static struct module_pin_mux lcd_pin_mux[] = { + {OFFSET(gpmc_ad8), (MODE(1))}, + {OFFSET(gpmc_ad9), (MODE(1))}, + {OFFSET(gpmc_ad10), (MODE(1))}, + {OFFSET(gpmc_ad11), (MODE(1))}, + {OFFSET(gpmc_ad12), (MODE(1))}, + {OFFSET(gpmc_ad13), (MODE(1))}, + {OFFSET(gpmc_ad14), (MODE(1))}, + {OFFSET(gpmc_ad15), (MODE(1))}, + {OFFSET(lcd_data0), (MODE(0) | PULLUDDIS)}, + {OFFSET(lcd_data1), (MODE(0) | PULLUDDIS)}, + {OFFSET(lcd_data2), (MODE(0) | PULLUDDIS)}, + {OFFSET(lcd_data3), (MODE(0) | PULLUDDIS)}, + {OFFSET(lcd_data4), (MODE(0) | PULLUDDIS)}, + {OFFSET(lcd_data5), (MODE(0) | PULLUDDIS)}, + {OFFSET(lcd_data6), (MODE(0) | PULLUDDIS)}, + {OFFSET(lcd_data7), (MODE(0) | PULLUDDIS)}, + {OFFSET(lcd_data8), (MODE(0) | PULLUDDIS)}, + {OFFSET(lcd_data9), (MODE(0) | PULLUDDIS)}, + {OFFSET(lcd_data10), (MODE(0) | PULLUDDIS)}, + {OFFSET(lcd_data11), (MODE(0) | PULLUDDIS)}, + {OFFSET(lcd_data12), (MODE(0) | PULLUDDIS)}, + {OFFSET(lcd_data13), (MODE(0) | PULLUDDIS)}, + {OFFSET(lcd_data14), (MODE(0) | PULLUDDIS)}, + {OFFSET(lcd_data15), (MODE(0) | PULLUDDIS)}, + {OFFSET(lcd_vsync), (MODE(0))}, + {OFFSET(lcd_hsync), (MODE(0))}, + {OFFSET(lcd_pclk), (MODE(0))}, + {OFFSET(lcd_ac_bias_en), (MODE(0))}, + {-1}, +}; + +static struct module_pin_mux mmc0_pin_mux[] = { + {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, + {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, + {OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, + {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, + {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, + {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, + {-1}, +}; + +static struct module_pin_mux mii_pin_mux[] = { + {OFFSET(mii1_crs), (MODE(1) | RXACTIVE)}, + {OFFSET(mii1_rxerr), (MODE(1) | RXACTIVE)}, + {OFFSET(mii1_txen), (MODE(1))}, + {OFFSET(mii1_txd1), (MODE(1))}, + {OFFSET(mii1_txd0), (MODE(1))}, + {OFFSET(mii1_rxd1), (MODE(1) | RXACTIVE)}, + {OFFSET(mii1_rxd0), (MODE(1) | RXACTIVE)}, + {OFFSET(rmii1_refclk), (MODE(0) | RXACTIVE)}, + {OFFSET(mdio_data), (MODE(0) | RXACTIVE | PULLUP_EN)}, + {OFFSET(mdio_clk), (MODE(0) | PULLUP_EN)}, + {-1}, +}; + +static struct module_pin_mux gpio_pin_mux[] = { + {OFFSET(mii1_col), (MODE(7) | RXACTIVE)}, + {OFFSET(uart1_ctsn), (MODE(7) | RXACTIVE | PULLUDDIS)}, + {OFFSET(uart1_rtsn), (MODE(7) | RXACTIVE | PULLUDDIS)}, + {OFFSET(uart1_rxd), (MODE(7) | RXACTIVE | PULLUDDIS)}, + {OFFSET(uart1_txd), (MODE(7) | RXACTIVE | PULLUDDIS)}, + {OFFSET(mii1_rxdv), (MODE(7) | RXACTIVE)}, + {OFFSET(mii1_txd3), (MODE(7) | RXACTIVE)}, + {OFFSET(mii1_txd2), (MODE(7) | RXACTIVE)}, + {OFFSET(mii1_txclk), (MODE(7) | RXACTIVE)}, + {OFFSET(mii1_rxclk), (MODE(7) | RXACTIVE)}, + {OFFSET(mii1_rxd3), (MODE(7) | RXACTIVE)}, + {OFFSET(mii1_rxd2), (MODE(7) | RXACTIVE)}, + {OFFSET(gpmc_a0), (MODE(7) | RXACTIVE)}, + {OFFSET(gpmc_a1), (MODE(7) | RXACTIVE)}, + {OFFSET(gpmc_a4), (MODE(7) | RXACTIVE)}, + {OFFSET(gpmc_a5), (MODE(7) | RXACTIVE)}, + {OFFSET(gpmc_a6), (MODE(7) | RXACTIVE)}, + {OFFSET(gpmc_a7), (MODE(7) | RXACTIVE)}, + {OFFSET(gpmc_a8), (MODE(7) | RXACTIVE)}, + {OFFSET(gpmc_a9), (MODE(7) | RXACTIVE)}, + {OFFSET(gpmc_a10), (MODE(7) | RXACTIVE)}, + {OFFSET(gpmc_a11), (MODE(7) | RXACTIVE)}, + {OFFSET(gpmc_wpn), (MODE(7) | RXACTIVE | PULLUP_EN)}, + {OFFSET(gpmc_be1n), (MODE(7) | RXACTIVE | PULLUP_EN)}, + {OFFSET(gpmc_csn1), (MODE(7) | RXACTIVE | PULLUP_EN)}, + {OFFSET(gpmc_csn2), (MODE(7) | RXACTIVE | PULLUP_EN)}, + {OFFSET(gpmc_csn3), (MODE(7) | RXACTIVE | PULLUP_EN)}, + {OFFSET(mcasp0_aclkr), (MODE(7) | RXACTIVE)}, + {OFFSET(mcasp0_fsr), (MODE(7))}, + {OFFSET(mcasp0_axr1), (MODE(7) | RXACTIVE)}, + {OFFSET(mcasp0_ahclkx), (MODE(7) | RXACTIVE)}, + {OFFSET(xdma_event_intr0), (MODE(7) | RXACTIVE | PULLUDDIS)}, + {OFFSET(xdma_event_intr1), (MODE(7) | RXACTIVE | PULLUDDIS)}, + {-1}, +}; + +static struct module_pin_mux i2c0_pin_mux[] = { + {OFFSET(i2c0_sda), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(i2c0_scl), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {-1}, +}; + +static struct module_pin_mux i2c1_pin_mux[] = { + {OFFSET(uart0_ctsn), (MODE(3) | RXACTIVE | PULLUDDIS)}, + {OFFSET(uart0_rtsn), (MODE(3) | RXACTIVE | PULLUDDIS)}, + {-1}, +}; + +static struct module_pin_mux usb0_pin_mux[] = { + {OFFSET(usb0_dm), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(usb0_dp), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(usb0_ce), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(usb0_id), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(usb0_vbus), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(usb0_drvvbus), (MODE(0))}, + {-1}, +}; + +static struct module_pin_mux usb1_pin_mux[] = { + {OFFSET(usb1_dm), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(usb1_dp), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(usb1_ce), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(usb1_id), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(usb1_vbus), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(usb1_drvvbus), (MODE(0))}, + {-1}, +}; + +static struct module_pin_mux spi0_pin_mux[] = { + {OFFSET(spi0_sclk), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(spi0_d0), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(spi0_d1), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(spi0_cs0), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(spi0_cs1), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {-1}, +}; + +static struct module_pin_mux spi1_pin_mux[] = { + {OFFSET(mcasp0_aclkx), (MODE(3) | RXACTIVE | PULLUP_EN)}, + {OFFSET(mcasp0_fsx), (MODE(3) | RXACTIVE | PULLUP_EN)}, + {OFFSET(mcasp0_axr0), (MODE(3) | RXACTIVE | PULLUP_EN)}, + {OFFSET(mcasp0_ahclkr), (MODE(3) | RXACTIVE | PULLUP_EN)}, + {-1}, +}; + +static struct module_pin_mux jtag_pin_mux[] = { + {OFFSET(tms), (MODE(0) | RXACTIVE | PULLUP_EN)}, + {OFFSET(tdi), (MODE(0) | RXACTIVE | PULLUP_EN)}, + {OFFSET(tdo), (MODE(0) | PULLUP_EN)}, + {OFFSET(tck), (MODE(0) | RXACTIVE | PULLUP_EN)}, + {OFFSET(ntrst), (MODE(0) | RXACTIVE)}, + {-1}, +}; + +static struct module_pin_mux nand_pin_mux[] = { + {OFFSET(gpmc_ad0), (MODE(0) | RXACTIVE)}, + {OFFSET(gpmc_ad1), (MODE(0) | RXACTIVE)}, + {OFFSET(gpmc_ad2), (MODE(0) | RXACTIVE)}, + {OFFSET(gpmc_ad3), (MODE(0) | RXACTIVE)}, + {OFFSET(gpmc_ad4), (MODE(0) | RXACTIVE)}, + {OFFSET(gpmc_ad5), (MODE(0) | RXACTIVE)}, + {OFFSET(gpmc_ad6), (MODE(0) | RXACTIVE)}, + {OFFSET(gpmc_ad7), (MODE(0) | RXACTIVE)}, + {OFFSET(gpmc_advn_ale), (MODE(0) | PULLUP_EN)}, + {OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUP_EN)}, + {OFFSET(gpmc_csn0), (MODE(0) | PULLUP_EN)}, + {OFFSET(gpmc_oen_ren), (MODE(0) | PULLUP_EN)}, + {OFFSET(gpmc_wen), (MODE(0) | PULLUP_EN)}, + {-1}, +}; + +static struct module_pin_mux ainx_pin_mux[] = { + {OFFSET(ain7), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(ain6), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(ain5), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(ain4), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(ain3), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(ain2), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(ain1), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(ain0), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {-1}, +}; + +static struct module_pin_mux rtc_pin_mux[] = { + {OFFSET(osc1_in), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(osc1_out), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(rtc_porz), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(enz_kaldo_1p8v), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {-1}, +}; + +static struct module_pin_mux gpmc_pin_mux[] = { + {OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, + {OFFSET(gpmc_clk), (MODE(0) | RXACTIVE)}, + {-1}, +}; + +static struct module_pin_mux pmic_pin_mux[] = { + {OFFSET(pmic_power_en), (MODE(0) | PULLUP_EN)}, + {-1}, +}; + +static struct module_pin_mux osc_pin_mux[] = { + {OFFSET(osc0_in), (MODE(0) | RXACTIVE | PULLUP_EN)}, + {OFFSET(osc0_out), (MODE(0) | PULLUP_EN)}, + {-1}, +}; + +static struct module_pin_mux pwm_pin_mux[] = { + {OFFSET(ecap0_in_pwm0_out), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(gpmc_a2), (MODE(6))}, + {OFFSET(gpmc_a3), (MODE(6))}, + {-1}, +}; + +static struct module_pin_mux emu_pin_mux[] = { + {OFFSET(emu0), (MODE(0) | RXACTIVE | PULLUP_EN)}, + {OFFSET(emu1), (MODE(0) | RXACTIVE | PULLUP_EN)}, + {-1}, +}; + +static struct module_pin_mux vref_pin_mux[] = { + {OFFSET(vrefp), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(vrefn), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {-1}, +}; + +static struct module_pin_mux misc_pin_mux[] = { + {OFFSET(porz), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(nnmi), (MODE(0) | RXACTIVE | PULLUDDIS)}, + {OFFSET(ext_wakeup), (MODE(0) | RXACTIVE)}, + {-1}, +}; + +void enable_uart0_pin_mux(void) +{ + configure_module_pin_mux(uart0_pin_mux); +} + +void enable_i2c0_pin_mux(void) +{ + configure_module_pin_mux(i2c0_pin_mux); +} + +void enable_board_pin_mux(void) +{ + configure_module_pin_mux(ddr_pin_mux); + configure_module_pin_mux(lcd_pin_mux); + configure_module_pin_mux(mmc0_pin_mux); + configure_module_pin_mux(mii_pin_mux); + configure_module_pin_mux(gpio_pin_mux); + configure_module_pin_mux(i2c1_pin_mux); + configure_module_pin_mux(usb0_pin_mux); + configure_module_pin_mux(usb1_pin_mux); + configure_module_pin_mux(spi0_pin_mux); + configure_module_pin_mux(spi1_pin_mux); + configure_module_pin_mux(jtag_pin_mux); + configure_module_pin_mux(nand_pin_mux); + configure_module_pin_mux(ainx_pin_mux); + configure_module_pin_mux(rtc_pin_mux); + configure_module_pin_mux(gpmc_pin_mux); + configure_module_pin_mux(pmic_pin_mux); + configure_module_pin_mux(osc_pin_mux); + configure_module_pin_mux(pwm_pin_mux); + configure_module_pin_mux(emu_pin_mux); + configure_module_pin_mux(vref_pin_mux); + configure_module_pin_mux(misc_pin_mux); +} diff --git a/board/socrates/socrates.c b/board/socrates/socrates.c index 97fd0e4..2caefbb 100644 --- a/board/socrates/socrates.c +++ b/board/socrates/socrates.c @@ -143,7 +143,7 @@ void local_bus_init (void) get_sys_info (&sysinfo); clkdiv = lbc->lcrr & LCRR_CLKDIV; - lbc_mhz = sysinfo.freqSystemBus / 1000000 / clkdiv; + lbc_mhz = sysinfo.freq_systembus / 1000000 / clkdiv; /* Disable PLL bypass for Local Bus Clock >= 66 MHz */ if (lbc_mhz >= 66) diff --git a/board/ti/am335x/README b/board/ti/am335x/README index 67b5246..2a30ab8 100644 --- a/board/ti/am335x/README +++ b/board/ti/am335x/README @@ -13,7 +13,33 @@ documented in TI's reference designs: - AM335x EVM SK - Beaglebone White - Beaglebone Black -' + +Customization +============= + +Given that all of the above boards are reference platforms (and the +Beaglebone platforms are OSHA), it is likely that this platform code and +configuration will be used as the basis of a custom platform. It is +worth noting that aside from things such as NAND or MMC only being +required if a custom platform makes use of these blocks, the following +are required, depending on design: + +- GPIO is only required if DDR3 power is controlled in a way similar to + EVM SK +- SPI is only required for SPI flash, or exposing the SPI bus. + +The following blocks are required: +- I2C, to talk with the PMIC and ensure that we do not run afoul of + errata 1.0.24. + +When removing options as part of customization, +CONFIG_EXTRA_ENV_SETTINGS will need additional care to update for your +needs and to remove no longer relevant options as in some cases we +define additional text blocks (such as for NAND or DFU strings). Also +note that all of the SPL options are grouped together, rather than with +the IP blocks, so both areas will need their choices updated to reflect +the custom design. + NAND ==== diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c index 728afc2..cc04426 100644 --- a/board/ti/am335x/board.c +++ b/board/ti/am335x/board.c @@ -30,12 +30,6 @@ DECLARE_GLOBAL_DATA_PTR; -static struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE; - -/* MII mode defines */ -#define MII_MODE_ENABLE 0x0 -#define RGMII_MODE_ENABLE 0x3A - /* GPIO that controls power to DDR on EVM-SK */ #define GPIO_DDR_VTT_EN 7 @@ -242,59 +236,35 @@ int spl_start_uboot(void) } #endif -#endif +#define OSC (V_OSCK/1000000) +const struct dpll_params dpll_ddr = { + 266, OSC-1, 1, -1, -1, -1, -1}; +const struct dpll_params dpll_ddr_evm_sk = { + 303, OSC-1, 1, -1, -1, -1, -1}; +const struct dpll_params dpll_ddr_bone_black = { + 400, OSC-1, 1, -1, -1, -1, -1}; -/* - * early system init of muxing and clocks. - */ -void s_init(void) +const struct dpll_params *get_dpll_ddr_params(void) { - __maybe_unused struct am335x_baseboard_id header; - - /* - * The ROM will only have set up sufficient pinmux to allow for the - * first 4KiB NOR to be read, we must finish doing what we know of - * the NOR mux in this space in order to continue. - */ -#ifdef CONFIG_NOR_BOOT - asm("stmfd sp!, {r2 - r4}"); - asm("movw r4, #0x8A4"); - asm("movw r3, #0x44E1"); - asm("orr r4, r4, r3, lsl #16"); - asm("mov r2, #9"); - asm("mov r3, #8"); - asm("gpmc_mux: str r2, [r4], #4"); - asm("subs r3, r3, #1"); - asm("bne gpmc_mux"); - asm("ldmfd sp!, {r2 - r4}"); -#endif - -#ifdef CONFIG_SPL_BUILD - /* - * Save the boot parameters passed from romcode. - * We cannot delay the saving further than this, - * to prevent overwrites. - */ - save_omap_boot_params(); -#endif - - /* WDT1 is already running when the bootloader gets control - * Disable it to avoid "random" resets - */ - writel(0xAAAA, &wdtimer->wdtwspr); - while (readl(&wdtimer->wdtwwps) != 0x0) - ; - writel(0x5555, &wdtimer->wdtwspr); - while (readl(&wdtimer->wdtwwps) != 0x0) - ; + struct am335x_baseboard_id header; -#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT) - /* Setup the PLLs and the clocks for the peripherals */ - pll_init(); + enable_i2c0_pin_mux(); + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + if (read_eeprom(&header) < 0) + puts("Could not get board ID.\n"); - /* Enable RTC32K clock */ - rtc32k_enable(); + if (board_is_evm_sk(&header)) + return &dpll_ddr_evm_sk; + else if (board_is_bone_lt(&header)) + return &dpll_ddr_bone_black; + else if (board_is_evm_15_or_later(&header)) + return &dpll_ddr_evm_sk; + else + return &dpll_ddr; +} +void set_uart_mux_conf(void) +{ #ifdef CONFIG_SERIAL1 enable_uart0_pin_mux(); #endif /* CONFIG_SERIAL1 */ @@ -313,27 +283,25 @@ void s_init(void) #ifdef CONFIG_SERIAL6 enable_uart5_pin_mux(); #endif /* CONFIG_SERIAL6 */ +} - uart_soft_reset(); +void set_mux_conf_regs(void) +{ + __maybe_unused struct am335x_baseboard_id header; + + if (read_eeprom(&header) < 0) + puts("Could not get board ID.\n"); -#if defined(CONFIG_NOR_BOOT) - /* We want our console now. */ - gd->baudrate = CONFIG_BAUDRATE; - serial_init(); - gd->have_console = 1; -#else - gd = &gdata; + enable_board_pin_mux(&header); +} - preloader_console_init(); -#endif +void sdram_init(void) +{ + __maybe_unused struct am335x_baseboard_id header; - /* Initalize the board header */ - enable_i2c0_pin_mux(); - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); if (read_eeprom(&header) < 0) puts("Could not get board ID.\n"); - enable_board_pin_mux(&header); if (board_is_evm_sk(&header)) { /* * EVM SK 1.2A and later use gpio0_7 to enable DDR3. @@ -357,8 +325,8 @@ void s_init(void) else config_ddr(266, MT47H128M16RT25E_IOCTRL_VALUE, &ddr2_data, &ddr2_cmd_ctrl_data, &ddr2_emif_reg_data, 0); -#endif } +#endif /* * Basic board specific setup. Pinmux has been handled already. @@ -371,7 +339,7 @@ int board_init(void) STNOR_GPMC_CONFIG5, STNOR_GPMC_CONFIG6, STNOR_GPMC_CONFIG7 }; #endif - gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100; + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; gpmc_init(); @@ -488,7 +456,7 @@ int board_eth_init(bd_t *bis) cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if = PHY_INTERFACE_MODE_MII; } else { - writel(RGMII_MODE_ENABLE, &cdev->miisel); + writel((RGMII_MODE_ENABLE | RGMII_INT_DELAY), &cdev->miisel); cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if = PHY_INTERFACE_MODE_RGMII; } diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c index 5b7ed63..b2bfda5 100644 --- a/board/ti/am335x/mux.c +++ b/board/ti/am335x/mux.c @@ -239,6 +239,25 @@ static struct module_pin_mux bone_norcape_pin_mux[] = { }; #endif +#if defined(CONFIG_NOR_BOOT) +static struct module_pin_mux norboot_pin_mux[] = { + {OFFSET(lcd_data1), MODE(1) | PULLUDDIS}, + {OFFSET(lcd_data2), MODE(1) | PULLUDDIS}, + {OFFSET(lcd_data3), MODE(1) | PULLUDDIS}, + {OFFSET(lcd_data4), MODE(1) | PULLUDDIS}, + {OFFSET(lcd_data5), MODE(1) | PULLUDDIS}, + {OFFSET(lcd_data6), MODE(1) | PULLUDDIS}, + {OFFSET(lcd_data7), MODE(1) | PULLUDDIS}, + {OFFSET(lcd_data8), MODE(1) | PULLUDDIS}, + {OFFSET(lcd_data9), MODE(1) | PULLUDDIS}, + {-1}, +}; + +void enable_norboot_pin_mux(void) +{ + configure_module_pin_mux(norboot_pin_mux); +} +#endif void enable_uart0_pin_mux(void) { diff --git a/board/ti/am43xx/Makefile b/board/ti/am43xx/Makefile new file mode 100644 index 0000000..4a1bb7c --- /dev/null +++ b/board/ti/am43xx/Makefile @@ -0,0 +1,38 @@ +# +# Makefile +# +# Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +ifdef CONFIG_SPL_BUILD +COBJS := mux.o +endif + +COBJS += board.o +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS) $(SOBJS)) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/ti/am43xx/board.c b/board/ti/am43xx/board.c new file mode 100644 index 0000000..51b2576 --- /dev/null +++ b/board/ti/am43xx/board.c @@ -0,0 +1,57 @@ +/* + * board.c + * + * Board functions for TI AM43XX based boards + * + * Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <spl.h> +#include <asm/arch/clock.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/mux.h> +#include "board.h" + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_SPL_BUILD + +const struct dpll_params dpll_ddr = { + -1, -1, -1, -1, -1, -1, -1}; + +const struct dpll_params *get_dpll_ddr_params(void) +{ + return &dpll_ddr; +} + +void set_uart_mux_conf(void) +{ + enable_uart0_pin_mux(); +} + +void set_mux_conf_regs(void) +{ + enable_board_pin_mux(); +} + +void sdram_init(void) +{ +} +#endif + +int board_init(void) +{ + gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100; + + return 0; +} + +#ifdef CONFIG_BOARD_LATE_INIT +int board_late_init(void) +{ + return 0; +} +#endif diff --git a/board/ti/am43xx/board.h b/board/ti/am43xx/board.h new file mode 100644 index 0000000..8ca098b --- /dev/null +++ b/board/ti/am43xx/board.h @@ -0,0 +1,17 @@ +/* + * board.h + * + * TI AM437x boards information header + * Derived from AM335x board. + * + * Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _BOARD_H_ +#define _BOARD_H_ + +void enable_uart0_pin_mux(void); +void enable_board_pin_mux(void); +#endif diff --git a/board/ti/am43xx/mux.c b/board/ti/am43xx/mux.c new file mode 100644 index 0000000..700e9a7 --- /dev/null +++ b/board/ti/am43xx/mux.c @@ -0,0 +1,27 @@ +/* + * mux.c + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/mux.h> +#include "board.h" + +static struct module_pin_mux uart0_pin_mux[] = { + {OFFSET(uart0_rxd), (MODE(0) | RXACTIVE)}, /* UART0_RXD */ + {OFFSET(uart0_txd), (MODE(0))}, /* UART0_TXD */ + {-1}, +}; + +void enable_uart0_pin_mux(void) +{ + configure_module_pin_mux(uart0_pin_mux); +} + +void enable_board_pin_mux(void) +{ +} diff --git a/board/ti/omap5_uevm/evm.c b/board/ti/omap5_uevm/evm.c index 2c00648..4706330 100644 --- a/board/ti/omap5_uevm/evm.c +++ b/board/ti/omap5_uevm/evm.c @@ -14,10 +14,22 @@ #include "mux_data.h" +#ifdef CONFIG_USB_EHCI +#include <usb.h> +#include <asm/gpio.h> +#include <asm/arch/clock.h> +#include <asm/arch/ehci.h> +#include <asm/ehci-omap.h> + +#define DIE_ID_REG_BASE (OMAP54XX_L4_CORE_BASE + 0x2000) +#define DIE_ID_REG_OFFSET 0x200 + +#endif + DECLARE_GLOBAL_DATA_PTR; const struct omap_sysinfo sysinfo = { - "Board: OMAP5430 EVM\n" + "Board: OMAP5432 uEVM\n" }; /** @@ -109,3 +121,85 @@ int board_mmc_init(bd_t *bis) return 0; } #endif + +#ifdef CONFIG_USB_EHCI +static struct omap_usbhs_board_data usbhs_bdata = { + .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[1] = OMAP_EHCI_PORT_MODE_HSIC, + .port_mode[2] = OMAP_EHCI_PORT_MODE_HSIC, +}; + +static void enable_host_clocks(void) +{ + int hs_clk_ctrl_val = (OPTFCLKEN_HSIC60M_P3_CLK | + OPTFCLKEN_HSIC480M_P3_CLK | + OPTFCLKEN_HSIC60M_P2_CLK | + OPTFCLKEN_HSIC480M_P2_CLK | + OPTFCLKEN_UTMI_P3_CLK | OPTFCLKEN_UTMI_P2_CLK); + + /* Enable port 2 and 3 clocks*/ + setbits_le32((*prcm)->cm_l3init_hsusbhost_clkctrl, hs_clk_ctrl_val); + + /* Enable port 2 and 3 usb host ports tll clocks*/ + setbits_le32((*prcm)->cm_l3init_hsusbtll_clkctrl, + (OPTFCLKEN_USB_CH1_CLK_ENABLE | OPTFCLKEN_USB_CH2_CLK_ENABLE)); +} + +int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor) +{ + int ret; + int auxclk; + int reg; + uint8_t device_mac[6]; + + enable_host_clocks(); + + if (!getenv("usbethaddr")) { + reg = DIE_ID_REG_BASE + DIE_ID_REG_OFFSET; + + /* + * create a fake MAC address from the processor ID code. + * first byte is 0x02 to signify locally administered. + */ + device_mac[0] = 0x02; + device_mac[1] = readl(reg + 0x10) & 0xff; + device_mac[2] = readl(reg + 0xC) & 0xff; + device_mac[3] = readl(reg + 0x8) & 0xff; + device_mac[4] = readl(reg) & 0xff; + device_mac[5] = (readl(reg) >> 8) & 0xff; + + eth_setenv_enetaddr("usbethaddr", device_mac); + } + + auxclk = readl((*prcm)->scrm_auxclk1); + /* Request auxilary clock */ + auxclk |= AUXCLK_ENABLE_MASK; + writel(auxclk, (*prcm)->scrm_auxclk1); + + ret = omap_ehci_hcd_init(&usbhs_bdata, hccr, hcor); + if (ret < 0) { + puts("Failed to initialize ehci\n"); + return ret; + } + + return 0; +} + +int ehci_hcd_stop(void) +{ + int ret; + + ret = omap_ehci_hcd_stop(); + return ret; +} + +void usb_hub_reset_devices(int port) +{ + /* The LAN9730 needs to be reset after the port power has been set. */ + if (port == 3) { + gpio_direction_output(CONFIG_OMAP_EHCI_PHY3_RESET_GPIO, 0); + udelay(10); + gpio_direction_output(CONFIG_OMAP_EHCI_PHY3_RESET_GPIO, 1); + } +} +#endif diff --git a/board/ti/omap5_uevm/mux_data.h b/board/ti/omap5_uevm/mux_data.h index 612c13e..31ce363 100644 --- a/board/ti/omap5_uevm/mux_data.h +++ b/board/ti/omap5_uevm/mux_data.h @@ -42,7 +42,8 @@ const struct pad_conf_entry core_padconf_array_essential[] = { {USBD0_SS_RX, (IEN | M0)}, /* USBD0_SS_RX */ {I2C5_SCL, (IEN | M0)}, /* I2C5_SCL */ {I2C5_SDA, (IEN | M0)}, /* I2C5_SDA */ - + {HSI2_ACWAKE, (PTU | M6)}, /* HSI2_ACWAKE */ + {HSI2_CAFLAG, (PTU | M6)}, /* HSI2_CAFLAG */ }; const struct pad_conf_entry wkup_padconf_array_essential[] = { @@ -50,6 +51,7 @@ const struct pad_conf_entry wkup_padconf_array_essential[] = { {SR_PMIC_SCL, (PTU | IEN | M0)}, /* SR_PMIC_SCL */ {SR_PMIC_SDA, (PTU | IEN | M0)}, /* SR_PMIC_SDA */ {SYS_32K, (IEN | M0)}, /* SYS_32K */ + {FREF_CLK1_OUT, (PTD | IEN | M0)}, /* FREF_CLK1_OUT */ }; diff --git a/board/ti/sdp4430/sdp.c b/board/ti/sdp4430/sdp.c index 25daaa9..79270a9 100644 --- a/board/ti/sdp4430/sdp.c +++ b/board/ti/sdp4430/sdp.c @@ -28,7 +28,6 @@ int board_init(void) { gpmc_init(); - gd->bd->bi_arch_number = MACH_TYPE_OMAP_4430SDP; gd->bd->bi_boot_params = (0x80000000 + 0x100); /* boot param addr */ return 0; @@ -66,7 +65,8 @@ void set_muxconf_regs_essential(void) sizeof(wkup_padconf_array_essential) / sizeof(struct pad_conf_entry)); - if (omap_revision() >= OMAP4460_ES1_0) + if ((omap_revision() >= OMAP4460_ES1_0) && + (omap_revision() < OMAP4470_ES1_0)) do_set_mux((*ctrl)->control_padconf_wkup_base, wkup_padconf_array_essential_4460, sizeof(wkup_padconf_array_essential_4460) / diff --git a/board/ti/ti814x/evm.c b/board/ti/ti814x/evm.c index c469645..e406326 100644 --- a/board/ti/ti814x/evm.c +++ b/board/ti/ti814x/evm.c @@ -27,30 +27,10 @@ DECLARE_GLOBAL_DATA_PTR; -#ifdef CONFIG_SPL_BUILD -static struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE; -#endif - static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; /* UART Defines */ #ifdef CONFIG_SPL_BUILD -static void uart_enable(void) -{ - /* UART softreset */ - uart_soft_reset(); -} - -static void wdt_disable(void) -{ - writel(0xAAAA, &wdtimer->wdtwspr); - while (readl(&wdtimer->wdtwwps) != 0x0) - ; - writel(0x5555, &wdtimer->wdtwspr); - while (readl(&wdtimer->wdtwwps) != 0x0) - ; -} - static const struct cmd_control evm_ddr2_cctrl_data = { .cmd0csratio = 0x80, .cmd0dldiff = 0x04, @@ -100,68 +80,39 @@ static const struct ddr_data evm_ddr2_data = { .datauserank0delay = 1, .datadldiff0 = 0x4, }; -#endif -/* - * early system init of muxing and clocks. - */ -void s_init(void) +void set_uart_mux_conf(void) { -#ifdef CONFIG_SPL_BUILD - /* - * Save the boot parameters passed from romcode. - * We cannot delay the saving further than this, - * to prevent overwrites. - */ -#ifdef CONFIG_SPL_BUILD - save_omap_boot_params(); -#endif - - /* WDT1 is already running when the bootloader gets control - * Disable it to avoid "random" resets - */ - wdt_disable(); - - /* Enable timer */ - timer_init(); - - /* Setup the PLLs and the clocks for the peripherals */ - pll_init(); - - /* Enable RTC32K clock */ - rtc32k_enable(); - /* Set UART pins */ enable_uart0_pin_mux(); +} +void set_mux_conf_regs(void) +{ /* Set MMC pins */ enable_mmc1_pin_mux(); /* Set Ethernet pins */ enable_enet_pin_mux(); +} - /* Enable UART */ - uart_enable(); - - gd = &gdata; - - preloader_console_init(); - +void sdram_init(void) +{ config_dmm(&evm_lisa_map_regs); config_ddr(0, 0, &evm_ddr2_data, &evm_ddr2_cctrl_data, &evm_ddr2_emif0_regs, 0); config_ddr(0, 0, &evm_ddr2_data, &evm_ddr2_cctrl_data, &evm_ddr2_emif1_regs, 1); -#endif } +#endif /* * Basic board specific setup. Pinmux has been handled already. */ int board_init(void) { - gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100; + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; return 0; } diff --git a/board/ti/ti816x/Makefile b/board/ti/ti816x/Makefile new file mode 100644 index 0000000..17ce72a --- /dev/null +++ b/board/ti/ti816x/Makefile @@ -0,0 +1,37 @@ +# +# Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com> +# Antoine Tenart, <atenart@adeneo-embedded.com> +# +# Based on TI-PSP-04.00.02.14 : +# +# Copyright (C) 2009, Texas Instruments, Incorporated +# +# SPDX-License-Identifier: GPL-2.0 +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS := evm.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +clean: + rm -f $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/ti/ti816x/evm.c b/board/ti/ti816x/evm.c new file mode 100644 index 0000000..74d35e9 --- /dev/null +++ b/board/ti/ti816x/evm.c @@ -0,0 +1,229 @@ +/* + * evm.c + * + * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com> + * Antoine Tenart, <atenart@adeneo-embedded.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <spl.h> +#include <asm/cache.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/cpu.h> +#include <asm/arch/ddr_defs.h> +#include <asm/arch/hardware.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/mmc_host_def.h> +#include <asm/arch/mem.h> +#include <asm/arch/mux.h> + +DECLARE_GLOBAL_DATA_PTR; + +int board_init(void) +{ + gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100; + return 0; +} + +#ifdef CONFIG_SPL_BUILD + +static struct module_pin_mux mmc_pin_mux[] = { + { OFFSET(pincntl157), PULLDOWN_EN | PULLUDDIS | MODE(0x0) }, + { OFFSET(pincntl158), PULLDOWN_EN | PULLUDEN | MODE(0x0) }, + { OFFSET(pincntl159), PULLUP_EN | PULLUDDIS | MODE(0x0) }, + { OFFSET(pincntl160), PULLUP_EN | PULLUDDIS | MODE(0x0) }, + { OFFSET(pincntl161), PULLUP_EN | PULLUDDIS | MODE(0x0) }, + { OFFSET(pincntl162), PULLUP_EN | PULLUDDIS | MODE(0x0) }, + { OFFSET(pincntl163), PULLUP_EN | PULLUDDIS | MODE(0x0) }, + { -1 }, +}; + +const struct dmm_lisa_map_regs evm_lisa_map_regs = { + .dmm_lisa_map_0 = 0x00000000, + .dmm_lisa_map_1 = 0x00000000, + .dmm_lisa_map_2 = 0x80640300, + .dmm_lisa_map_3 = 0xC0640320, +}; + +/* + * DDR2 related definitions + */ +#ifdef CONFIG_TI816X_EVM_DDR2 +static struct ddr_data ddr2_data = { + .datardsratio0 = ((0x40<<10) | (0x40<<0)), + .datawdsratio0 = ((0x4A<<10) | (0x4A<<0)), + .datawiratio0 = ((0x0<<10) | (0x0<<0)), + .datagiratio0 = ((0x0<<10) | (0x0<<0)), + .datafwsratio0 = ((0x13A<<10) | (0x13A<<0)), + .datawrsratio0 = ((0x8A<<10) | (0x8A<<0)), + .datauserank0delay = 0x1, + .datadldiff0 = 0x0, /* depend on cpu rev, set later */ +}; + +static struct cmd_control ddr2_ctrl = { + .cmd0csratio = 0x80, + .cmd0dldiff = 0x04, /* reset value is 0x4 */ + .cmd0iclkout = 0x00, + + .cmd1csratio = 0x80, + .cmd1dldiff = 0x04, /* reset value is 0x4 */ + .cmd1iclkout = 0x00, + + .cmd2csratio = 0x80, + .cmd2dldiff = 0x04, /* reset value is 0x4 */ + .cmd2iclkout = 0x00, + +}; + +static struct emif_regs ddr2_emif0_regs = { + .sdram_config = 0x43801A3A, + .ref_ctrl = 0x10000C30, + .sdram_tim1 = 0x0AAB15E2, + .sdram_tim2 = 0x423631D2, + .sdram_tim3 = 0x0080032F, + .emif_ddr_phy_ctlr_1 = 0x0, /* depend on cpu rev, set later */ +}; + +static struct emif_regs ddr2_emif1_regs = { + .sdram_config = 0x43801A3A, + .ref_ctrl = 0x10000C30, + .sdram_tim1 = 0x0AAB15E2, + .sdram_tim2 = 0x423631D2, + .sdram_tim3 = 0x0080032F, + .emif_ddr_phy_ctlr_1 = 0x0, /* depend on cpu rev, set later */ +}; +#endif + +/* + * DDR3 related definitions + */ + +#if defined(CONFIG_TI816X_DDR_PLL_400) +#define RD_DQS 0x03B +#define WR_DQS 0x0A6 +#define RD_DQS_GATE 0x12A +#define EMIF_SDCFG 0x62A41032 +#define EMIF_SDREF 0x10000C30 +#define EMIF_TIM1 0x0CCCE524 +#define EMIF_TIM2 0x30308023 +#define EMIF_TIM3 0x009F82CF +#define EMIF_PHYCFG 0x0000010B +#elif defined(CONFIG_TI816X_DDR_PLL_531) +#define RD_DQS 0x039 +#define WR_DQS 0x0B4 +#define RD_DQS_GATE 0x13D +#define EMIF_SDCFG 0x62A51832 +#define EMIF_SDREF 0x1000102E +#define EMIF_TIM1 0x0EF136AC +#define EMIF_TIM2 0x30408063 +#define EMIF_TIM3 0x009F83AF +#define EMIF_PHYCFG 0x0000010C +#elif defined(CONFIG_TI816X_DDR_PLL_675) +#define RD_DQS 0x039 +#define WR_DQS 0x091 +#define RD_DQS_GATE 0x196 +#define EMIF_SDCFG 0x62A63032 +#define EMIF_SDREF 0x10001491 +#define EMIF_TIM1 0x13358875 +#define EMIF_TIM2 0x5051806C +#define EMIF_TIM3 0x009F84AF +#define EMIF_PHYCFG 0x0000010F +#elif defined(CONFIG_TI816X_DDR_PLL_796) +#define RD_DQS 0x035 +#define WR_DQS 0x093 +#define RD_DQS_GATE 0x1B3 +#define EMIF_SDCFG 0x62A73832 +#define EMIF_SDREF 0x10001841 +#define EMIF_TIM1 0x1779C9FE +#define EMIF_TIM2 0x50608074 +#define EMIF_TIM3 0x009F857F +#define EMIF_PHYCFG 0x00000110 +#endif + +static struct ddr_data ddr3_data = { + .datardsratio0 = ((RD_DQS<<10) | (RD_DQS<<0)), + .datawdsratio0 = ((WR_DQS<<10) | (WR_DQS<<0)), + .datawiratio0 = ((0x20<<10) | 0x20<<0), + .datagiratio0 = ((0x20<<10) | 0x20<<0), + .datafwsratio0 = ((RD_DQS_GATE<<10) | (RD_DQS_GATE<<0)), + .datawrsratio0 = (((WR_DQS+0x40)<<10) | ((WR_DQS+0x40)<<0)), + .datauserank0delay = 0x1, + .datadldiff0 = 0x0, /* depend on cpu rev, set later */ +}; + +static const struct cmd_control ddr3_ctrl = { + .cmd0csratio = 0x100, + .cmd0dldiff = 0x004, /* reset value is 0x4 */ + .cmd0iclkout = 0x001, + + .cmd1csratio = 0x100, + .cmd1dldiff = 0x004, /* reset value is 0x4 */ + .cmd1iclkout = 0x001, + + .cmd2csratio = 0x100, + .cmd2dldiff = 0x004, /* reset value is 0x4 */ + .cmd2iclkout = 0x001, +}; + +static const struct emif_regs ddr3_emif0_regs = { + .sdram_config = EMIF_SDCFG, + .ref_ctrl = EMIF_SDREF, + .sdram_tim1 = EMIF_TIM1, + .sdram_tim2 = EMIF_TIM2, + .sdram_tim3 = EMIF_TIM3, + .emif_ddr_phy_ctlr_1 = EMIF_PHYCFG, +}; + +static const struct emif_regs ddr3_emif1_regs = { + .sdram_config = EMIF_SDCFG, + .ref_ctrl = EMIF_SDREF, + .sdram_tim1 = EMIF_TIM1, + .sdram_tim2 = EMIF_TIM2, + .sdram_tim3 = EMIF_TIM3, + .emif_ddr_phy_ctlr_1 = EMIF_PHYCFG, +}; + +void set_uart_mux_conf(void) {} + +void set_mux_conf_regs(void) +{ + configure_module_pin_mux(mmc_pin_mux); +} + +void sdram_init(void) +{ + config_dmm(&evm_lisa_map_regs); + +#ifdef CONFIG_TI816X_EVM_DDR2 + ddr2_data.datadldiff0 = (get_cpu_rev() == 0x1 ? 0x0 : 0xF); + ddr2_ctrl.cmd0dldiff = (get_cpu_rev() == 0x1 ? 0x0 : 0xF); + ddr2_ctrl.cmd1dldiff = (get_cpu_rev() == 0x1 ? 0x0 : 0xF); + ddr2_ctrl.cmd2dldiff = (get_cpu_rev() == 0x1 ? 0x0 : 0xF); + + if (CONFIG_TI816X_USE_EMIF0) { + ddr2_emif0_regs.emif_ddr_phy_ctlr_1 = + (get_cpu_rev() == 0x1 ? 0x0000010B : 0x0000030B); + config_ddr(0, 0, &ddr2_data, &ddr2_ctrl, &ddr2_emif0_regs, 0); + } + + if (CONFIG_TI816X_USE_EMIF1) { + ddr2_emif1_regs.emif_ddr_phy_ctlr_1 = + (get_cpu_rev() == 0x1 ? 0x0000010B : 0x0000030B); + config_ddr(1, 0, &ddr2_data, &ddr2_ctrl, &ddr2_emif1_regs, 1); + } +#endif + +#ifdef CONFIG_TI816X_EVM_DDR3 + ddr3_data.datadldiff0 = (get_cpu_rev() == 0x1 ? 0x0 : 0xF); + + if (CONFIG_TI816X_USE_EMIF0) + config_ddr(0, 0, &ddr3_data, &ddr3_ctrl, &ddr3_emif0_regs, 0); + + if (CONFIG_TI816X_USE_EMIF1) + config_ddr(1, 0, &ddr3_data, &ddr3_ctrl, &ddr3_emif1_regs, 1); +#endif +} +#endif /* CONFIG_SPL_BUILD */ diff --git a/board/w7o/init.S b/board/w7o/init.S index b3aadca..490411e 100644 --- a/board/w7o/init.S +++ b/board/w7o/init.S @@ -1,26 +1,6 @@ -/****************************************************************************** - * This source code is dual-licensed. You may use it under the terms of the - * GNU General Public License version 2, or under the license below. - * - * This source code has been made available to you by IBM on an AS-IS - * basis. Anyone receiving this source is licensed under IBM - * copyrights to use it in any way he or she deems fit, including - * copying it, modifying it, compiling it, and redistributing it either - * with or without modifications. No license under IBM patents or - * patent applications is to be implied by the copyright license. - * - * Any user of this software should understand that IBM cannot provide - * technical support for this software and will not be responsible for - * any consequences resulting from the use of this software. - * - * Any person who transfers this source code or any derivative work - * must include the IBM copyright notice, this paragraph, and the - * preceding two paragraphs in the transferred software. - * - * COPYRIGHT I B M CORPORATION 1995 - * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M - * - *****************************************************************************/ +/* + * SPDX-License-Identifier: GPL-2.0 ibm-pibs + */ #include <config.h> #include <asm/ppc4xx.h> diff --git a/board/xes/xpedite537x/ddr.c b/board/xes/xpedite537x/ddr.c index 0daa189..c128fcb 100644 --- a/board/xes/xpedite537x/ddr.c +++ b/board/xes/xpedite537x/ddr.c @@ -210,7 +210,7 @@ void fsl_ddr_board_options(memctl_options_t *popts, unsigned int datarate; get_sys_info(&sysinfo); - datarate = sysinfo.freqDDRBus / 1000 / 1000; + datarate = sysinfo.freq_ddrbus / 1000 / 1000; for (i = 0; i < ARRAY_SIZE(bopts_ctrl[ctrl_num]); i++) { if ((bopts[i].datarate_mhz_low <= datarate) && diff --git a/board/xilinx/microblaze-generic/dts/microblaze.dts b/board/xilinx/dts/microblaze-generic.dts index 2033309..2033309 100644 --- a/board/xilinx/microblaze-generic/dts/microblaze.dts +++ b/board/xilinx/dts/microblaze-generic.dts diff --git a/board/xilinx/dts/microblaze.dts b/board/xilinx/dts/microblaze.dts deleted file mode 100644 index bf984b0..0000000 --- a/board/xilinx/dts/microblaze.dts +++ /dev/null @@ -1 +0,0 @@ -/include/ BOARD_DTS diff --git a/board/xilinx/zynq/board.c b/board/xilinx/zynq/board.c index 4bb140e..f7f1c59 100644 --- a/board/xilinx/zynq/board.c +++ b/board/xilinx/zynq/board.c @@ -20,6 +20,7 @@ Xilinx_desc fpga010 = XILINX_XC7Z010_DESC(0x10); Xilinx_desc fpga020 = XILINX_XC7Z020_DESC(0x20); Xilinx_desc fpga030 = XILINX_XC7Z030_DESC(0x30); Xilinx_desc fpga045 = XILINX_XC7Z045_DESC(0x45); +Xilinx_desc fpga100 = XILINX_XC7Z100_DESC(0x100); #endif int board_init(void) @@ -42,6 +43,9 @@ int board_init(void) case XILINX_ZYNQ_7045: fpga = fpga045; break; + case XILINX_ZYNQ_7100: + fpga = fpga100; + break; } #endif @@ -61,6 +65,23 @@ int board_eth_init(bd_t *bis) { u32 ret = 0; +#ifdef CONFIG_XILINX_AXIEMAC + ret |= xilinx_axiemac_initialize(bis, XILINX_AXIEMAC_BASEADDR, + XILINX_AXIDMA_BASEADDR); +#endif +#ifdef CONFIG_XILINX_EMACLITE + u32 txpp = 0; + u32 rxpp = 0; +# ifdef CONFIG_XILINX_EMACLITE_TX_PING_PONG + txpp = 1; +# endif +# ifdef CONFIG_XILINX_EMACLITE_RX_PING_PONG + rxpp = 1; +# endif + ret |= xilinx_emaclite_initialize(bis, XILINX_EMACLITE_BASEADDR, + txpp, rxpp); +#endif + #if defined(CONFIG_ZYNQ_GEM) # if defined(CONFIG_ZYNQ_GEM0) ret |= zynq_gem_initialize(bis, ZYNQ_GEM_BASEADDR0, @@ -96,5 +117,7 @@ int dram_init(void) { gd->ram_size = CONFIG_SYS_SDRAM_SIZE; + zynq_ddrc_init(); + return 0; } @@ -140,6 +140,7 @@ pm9g45 arm arm926ejs pm9g45 ronetix portuxg20 arm arm926ejs stamp9g20 taskit at91 stamp9g20:AT91SAM9G20,PORTUXG20 stamp9g20 arm arm926ejs stamp9g20 taskit at91 stamp9g20:AT91SAM9G20 cam_enc_4xx arm arm926ejs cam_enc_4xx ait davinci cam_enc_4xx +ipam390 arm arm926ejs ipam390 Barix davinci da830evm arm arm926ejs da8xxevm davinci davinci da850_am18xxevm arm arm926ejs da8xxevm davinci davinci da850evm:DA850_AM18X_EVM,MAC_ADDR_IN_EEPROM,SYS_I2C_EEPROM_ADDR_LEN=2,SYS_I2C_EEPROM_ADDR=0x50 da850evm arm arm926ejs da8xxevm davinci davinci da850evm:MAC_ADDR_IN_SPIFLASH @@ -253,7 +254,12 @@ am335x_evm_uart4 arm armv7 am335x ti am335x_evm_uart5 arm armv7 am335x ti am33xx am335x_evm:SERIAL6,CONS_INDEX=1,NAND am335x_evm_usbspl arm armv7 am335x ti am33xx am335x_evm:SERIAL1,CONS_INDEX=1,NAND,SPL_USBETH_SUPPORT am335x_boneblack arm armv7 am335x ti am33xx am335x_evm:SERIAL1,CONS_INDEX=1,EMMC_BOOT +am43xx_evm arm armv7 am43xx ti am33xx am43xx_evm:SERIAL1,CONS_INDEX=1 +dxr2 arm armv7 dxr2 siemens am33xx +pxm2 arm armv7 pxm2 siemens am33xx +rut arm armv7 rut siemens am33xx ti814x_evm arm armv7 ti814x ti am33xx +ti816x_evm arm armv7 ti816x ti am33xx pcm051 arm armv7 pcm051 phytec am33xx pcm051 sama5d3xek_mmc arm armv7 sama5d3xek atmel at91 sama5d3xek:SAMA5D3,SYS_USE_MMC sama5d3xek_nandflash arm armv7 sama5d3xek atmel at91 sama5d3xek:SAMA5D3,SYS_USE_NANDFLASH @@ -779,6 +785,8 @@ MPC8569MDS_NAND powerpc mpc85xx mpc8569mds freesca MPC8572DS powerpc mpc85xx mpc8572ds freescale - MPC8572DS MPC8572DS_36BIT powerpc mpc85xx mpc8572ds freescale - MPC8572DS:36BIT MPC8572DS_NAND powerpc mpc85xx mpc8572ds freescale - MPC8572DS:NAND +C29XPCIE powerpc mpc85xx c29xpcie freescale - C29XPCIE:C29XPCIE,36BIT +C29XPCIE_SPIFLASH powerpc mpc85xx c29xpcie freescale - C29XPCIE:C29XPCIE,36BIT,SPIFLASH P1010RDB_36BIT_NAND powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,36BIT,NAND P1010RDB_36BIT_NAND_SECBOOT powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,36BIT,NAND_SECBOOT,SECURE_BOOT P1010RDB_36BIT_NOR powerpc mpc85xx p1010rdb freescale - P1010RDB:P1010RDB,36BIT @@ -809,16 +817,20 @@ P1020RDB_36BIT powerpc mpc85xx p1_p2_rdb freesca P1020RDB_36BIT_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,36BIT,SDCARD P1020RDB_36BIT_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,36BIT,SPIFLASH P1020RDB_NAND powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,NAND -P1020RDB-PC powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB -P1020RDB-PC_36BIT powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB,36BIT -P1020RDB-PC_36BIT_NAND powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB,36BIT,NAND -P1020RDB-PC_36BIT_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB,36BIT,SDCARD -P1020RDB-PC_36BIT_SPIFLASH powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB,36BIT,SPIFLASH -P1020RDB-PC_NAND powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB,NAND -P1020RDB-PC_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB,SDCARD -P1020RDB-PC_SPIFLASH powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB,SPIFLASH +P1020RDB-PC powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB_PC +P1020RDB-PC_36BIT powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB_PC,36BIT +P1020RDB-PC_36BIT_NAND powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB_PC,36BIT,NAND +P1020RDB-PC_36BIT_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB_PC,36BIT,SDCARD +P1020RDB-PC_36BIT_SPIFLASH powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB_PC,36BIT,SPIFLASH +P1020RDB-PC_NAND powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB_PC,NAND +P1020RDB-PC_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB_PC,SDCARD +P1020RDB-PC_SPIFLASH powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB_PC,SPIFLASH P1020RDB_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,SDCARD P1020RDB_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P1020RDB,SPIFLASH +P1020RDB-PD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB_PD +P1020RDB-PD_NAND powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB_PD,NAND +P1020RDB-PD_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB_PD,SDCARD +P1020RDB-PD_SPIFLASH powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020RDB_PD,SPIFLASH P1020UTM-PC powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020UTM P1020UTM-PC_36BIT powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020UTM,36BIT P1020UTM-PC_36BIT_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1020UTM,36BIT,SDCARD @@ -852,6 +864,7 @@ P1025RDB_36BIT powerpc mpc85xx p1_p2_rdb_pc freesca P1025RDB_NAND powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1025RDB,NAND P1025RDB_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1025RDB,SDCARD P1025RDB_SPIFLASH powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1025RDB,SPIFLASH +TWR-P1025 powerpc mpc85xx p1_twr freescale - p1_twr:TWR_P1025 P2010RDB powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2010RDB P2010RDB_36BIT powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2010RDB,36BIT P2010RDB_36BIT_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2010RDB,36BIT,SDCARD @@ -928,6 +941,7 @@ stxgp3 powerpc mpc85xx stxgp3 stx stxssa powerpc mpc85xx stxssa stx - stxssa stxssa_4M powerpc mpc85xx stxssa stx - stxssa:STXSSA_4M T4240QDS powerpc mpc85xx t4qds freescale - T4240QDS:PPC_T4240 +T4240EMU powerpc mpc85xx t4qds freescale - T4240EMU:PPC_T4240 T4240QDS_SDCARD powerpc mpc85xx t4qds freescale - T4240QDS:PPC_T4240,RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000 T4240QDS_SPIFLASH powerpc mpc85xx t4qds freescale - T4240QDS:PPC_T4240,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000 T4240QDS_SRIO_PCIE_BOOT powerpc mpc85xx t4qds freescale - T4240QDS:PPC_T4240,SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000 @@ -1112,7 +1126,6 @@ PPChameleonEVB_ME_33 powerpc ppc4xx PPChameleonEVB dave APC405 powerpc ppc4xx apc405 esd AR405 powerpc ppc4xx ar405 esd ASH405 powerpc ppc4xx ash405 esd -CANBT powerpc ppc4xx canbt esd CMS700 powerpc ppc4xx cms700 esd CPCI2DP powerpc ppc4xx cpci2dp esd CPCI405 powerpc ppc4xx cpci405 esd diff --git a/common/Makefile b/common/Makefile index 87ba82e..288690b 100644 --- a/common/Makefile +++ b/common/Makefile @@ -92,6 +92,7 @@ COBJS-$(CONFIG_CMD_FLASH) += cmd_flash.o ifdef CONFIG_FPGA COBJS-$(CONFIG_CMD_FPGA) += cmd_fpga.o endif +COBJS-$(CONFIG_CMD_FPGAD) += cmd_fpgad.o COBJS-$(CONFIG_CMD_FS_GENERIC) += cmd_fs.o COBJS-$(CONFIG_CMD_FUSE) += cmd_fuse.o COBJS-$(CONFIG_CMD_GETTIME) += cmd_gettime.o diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c index af884b8..713de14 100644 --- a/common/cmd_bdinfo.c +++ b/common/cmd_bdinfo.c @@ -92,7 +92,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_num("immr_base", bd->bi_immr_base); #endif print_num("bootflags", bd->bi_bootflags); -#if defined(CONFIG_405CR) || defined(CONFIG_405EP) || \ +#if defined(CONFIG_405EP) || \ defined(CONFIG_405GP) || \ defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \ defined(CONFIG_440GR) || defined(CONFIG_440GRX) || \ @@ -106,7 +106,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) defined(CONFIG_440SPE) || defined(CONFIG_XILINX_405) print_mhz("pci_busfreq", bd->bi_pci_busfreq); #endif -#else /* ! CONFIG_405GP, CONFIG_405CR, CONFIG_405EP, CONFIG_XILINX_405, CONFIG_440EP CONFIG_440GR */ +#else /* ! CONFIG_405GP, CONFIG_405EP, CONFIG_XILINX_405, CONFIG_440EP CONFIG_440GR */ #if defined(CONFIG_CPM2) print_mhz("vco", bd->bi_vco); print_mhz("sccfreq", bd->bi_sccfreq); @@ -117,7 +117,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_mhz("cpmfreq", bd->bi_cpmfreq); #endif print_mhz("busfreq", bd->bi_busfreq); -#endif /* CONFIG_405GP, CONFIG_405CR, CONFIG_405EP, CONFIG_XILINX_405, CONFIG_440EP CONFIG_440GR */ +#endif /* CONFIG_405GP, CONFIG_405EP, CONFIG_XILINX_405, CONFIG_440EP CONFIG_440GR */ #ifdef CONFIG_ENABLE_36BIT_PHYS #ifdef CONFIG_PHYS_64BIT diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index 046e22f..1685c14 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -636,7 +636,7 @@ static int do_bootm_states(cmd_tbl_t *cmdtp, int flag, int argc, goto err; else if (ret == BOOTM_ERR_OVERLAP) ret = 0; -#ifdef CONFIG_SILENT_CONSOLE +#if defined(CONFIG_SILENT_CONSOLE) && !defined(CONFIG_SILENT_U_BOOT_ONLY) if (images->os.os == IH_OS_LINUX) fixup_silent_linux(); #endif @@ -1384,9 +1384,19 @@ static void fixup_silent_linux(void) char *buf; const char *env_val; char *cmdline = getenv("bootargs"); + int want_silent; - /* Only fix cmdline when requested */ - if (!(gd->flags & GD_FLG_SILENT)) + /* + * Only fix cmdline when requested. The environment variable can be: + * + * no - we never fixup + * yes - we always fixup + * unset - we rely on the console silent flag + */ + want_silent = getenv_yesno("silent_linux"); + if (want_silent == 0) + return; + else if (want_silent == -1 && !(gd->flags & GD_FLG_SILENT)) return; debug("before silent fix-up: %s\n", cmdline); diff --git a/common/cmd_dfu.c b/common/cmd_dfu.c index db066ac..793c422 100644 --- a/common/cmd_dfu.c +++ b/common/cmd_dfu.c @@ -19,8 +19,8 @@ static int do_dfu(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { const char *str_env; char *s = "dfu"; + int ret, i = 0; char *env_bkp; - int ret; if (argc < 3) return CMD_RET_USAGE; @@ -49,6 +49,15 @@ static int do_dfu(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) g_dnl_register(s); while (1) { + if (dfu_reset()) + /* + * This extra number of usb_gadget_handle_interrupts() + * calls is necessary to assure correct transmission + * completion with dfu-util + */ + if (++i == 10) + goto exit; + if (ctrlc()) goto exit; @@ -60,6 +69,9 @@ done: dfu_free_entities(); free(env_bkp); + if (dfu_reset()) + run_command("reset", 0); + return CMD_RET_SUCCESS; } diff --git a/common/cmd_fpgad.c b/common/cmd_fpgad.c new file mode 100644 index 0000000..1b25ed8 --- /dev/null +++ b/common/cmd_fpgad.c @@ -0,0 +1,84 @@ +/* + * (C) Copyright 2013 + * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc + * + * based on cmd_mem.c + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <command.h> + +#include <gdsys_fpga.h> + +static uint dp_last_fpga; +static uint dp_last_addr; +static uint dp_last_length = 0x40; + +/* + * FPGA Memory Display + * + * Syntax: + * fpgad {fpga} {addr} {len} + */ +#define DISP_LINE_LEN 16 +int do_fpga_md(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + unsigned int k; + unsigned int fpga; + ulong addr, length; + int rc = 0; + u16 linebuf[DISP_LINE_LEN/sizeof(u16)]; + + /* + * We use the last specified parameters, unless new ones are + * entered. + */ + fpga = dp_last_fpga; + addr = dp_last_addr; + length = dp_last_length; + + if (argc < 3) + return CMD_RET_USAGE; + + if ((flag & CMD_FLAG_REPEAT) == 0) { + /* + * FPGA is specified since argc > 2 + */ + fpga = simple_strtoul(argv[1], NULL, 16); + + /* + * Address is specified since argc > 2 + */ + addr = simple_strtoul(argv[2], NULL, 16); + + /* + * If another parameter, it is the length to display. + * Length is the number of objects, not number of bytes. + */ + if (argc > 3) + length = simple_strtoul(argv[3], NULL, 16); + } + + /* Print the lines. */ + for (k = 0; k < DISP_LINE_LEN / sizeof(u16); ++k) + fpga_get_reg(fpga, (u16 *)fpga_ptr[fpga] + k, k * sizeof(u16), + &linebuf[k]); + print_buffer(addr, (void *)linebuf, sizeof(u16), + length, DISP_LINE_LEN / sizeof(u16)); + addr += sizeof(u16)*length; + + dp_last_fpga = fpga; + dp_last_addr = addr; + dp_last_length = length; + return rc; +} + +U_BOOT_CMD( + fpgad, 4, 1, do_fpga_md, + "fpga register display", + "fpga address [# of objects]" +); diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c index 29f5181..ebce7d4 100644 --- a/common/cmd_i2c.c +++ b/common/cmd_i2c.c @@ -1438,10 +1438,12 @@ int do_i2c_bus_num(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) printf("Current bus is %d\n", i2c_get_bus_num()); else { bus_no = simple_strtoul(argv[1], NULL, 10); +#if defined(CONFIG_SYS_I2C) if (bus_no >= CONFIG_SYS_NUM_I2C_BUSES) { printf("Invalid bus %d\n", bus_no); return -1; } +#endif printf("Setting bus to %d\n", bus_no); ret = i2c_set_bus_num(bus_no); if (ret) diff --git a/common/cmd_ini.c b/common/cmd_ini.c index 74481cb..727fd1c 100644 --- a/common/cmd_ini.c +++ b/common/cmd_ini.c @@ -6,30 +6,7 @@ * Joe Hershberger, National Instruments, joe.hershberger@ni.com * All rights reserved. * - * The "inih" library is distributed under the following license, which is - * derived from and very similar to the 3-clause BSD license: - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Brush Technology nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY BRUSH TECHNOLOGY ''AS IS'' AND ANY - * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL BRUSH TECHNOLOGY BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * SPDX-License-Identifier: BSD-3-Clause * * Go to the project home page for more info: * http://code.google.com/p/inih/ diff --git a/common/cmd_load.c b/common/cmd_load.c index 0ce9496..f6e522c 100644 --- a/common/cmd_load.c +++ b/common/cmd_load.c @@ -18,7 +18,7 @@ DECLARE_GLOBAL_DATA_PTR; #if defined(CONFIG_CMD_LOADB) -static ulong load_serial_ymodem(ulong offset); +static ulong load_serial_ymodem(ulong offset, int mode); #endif #if defined(CONFIG_CMD_LOADS) @@ -462,7 +462,15 @@ static int do_load_serial_bin(cmd_tbl_t *cmdtp, int flag, int argc, offset, load_baudrate); - addr = load_serial_ymodem(offset); + addr = load_serial_ymodem(offset, xyzModem_ymodem); + + } else if (strcmp(argv[0],"loadx")==0) { + printf("## Ready for binary (xmodem) download " + "to 0x%08lX at %d bps...\n", + offset, + load_baudrate); + + addr = load_serial_ymodem(offset, xyzModem_xmodem); } else { @@ -942,7 +950,7 @@ static int getcxmodem(void) { return (getc()); return -1; } -static ulong load_serial_ymodem(ulong offset) +static ulong load_serial_ymodem(ulong offset, int mode) { int size; int err; @@ -953,7 +961,7 @@ static ulong load_serial_ymodem(ulong offset) ulong addr = 0; size = 0; - info.mode = xyzModem_ymodem; + info.mode = mode; res = xyzModem_stream_open(&info, &err); if (!res) { @@ -1056,6 +1064,14 @@ U_BOOT_CMD( ); U_BOOT_CMD( + loadx, 3, 0, do_load_serial_bin, + "load binary file over serial line (xmodem mode)", + "[ off ] [ baud ]\n" + " - load binary file over serial line" + " with offset 'off' and baudrate 'baud'" +); + +U_BOOT_CMD( loady, 3, 0, do_load_serial_bin, "load binary file over serial line (ymodem mode)", "[ off ] [ baud ]\n" diff --git a/common/cmd_nand.c b/common/cmd_nand.c index 886212a..04ab0f1 100644 --- a/common/cmd_nand.c +++ b/common/cmd_nand.c @@ -42,6 +42,7 @@ static int nand_dump(nand_info_t *nand, ulong off, int only_oob, int repeat) int i; u_char *datbuf, *oobbuf, *p; static loff_t last; + int ret = 0; if (repeat) off = last + nand->writesize; @@ -49,11 +50,17 @@ static int nand_dump(nand_info_t *nand, ulong off, int only_oob, int repeat) last = off; datbuf = memalign(ARCH_DMA_MINALIGN, nand->writesize); - oobbuf = memalign(ARCH_DMA_MINALIGN, nand->oobsize); - if (!datbuf || !oobbuf) { + if (!datbuf) { puts("No memory for page buffer\n"); return 1; } + + oobbuf = memalign(ARCH_DMA_MINALIGN, nand->oobsize); + if (!oobbuf) { + puts("No memory for page buffer\n"); + ret = 1; + goto free_dat; + } off &= ~(nand->writesize - 1); loff_t addr = (loff_t) off; struct mtd_oob_ops ops; @@ -66,23 +73,25 @@ static int nand_dump(nand_info_t *nand, ulong off, int only_oob, int repeat) i = mtd_read_oob(nand, addr, &ops); if (i < 0) { printf("Error (%d) reading page %08lx\n", i, off); - free(datbuf); - free(oobbuf); - return 1; + ret = 1; + goto free_all; } printf("Page %08lx dump:\n", off); - i = nand->writesize >> 4; - p = datbuf; - while (i--) { - if (!only_oob) + if (!only_oob) { + i = nand->writesize >> 4; + p = datbuf; + + while (i--) { printf("\t%02x %02x %02x %02x %02x %02x %02x %02x" " %02x %02x %02x %02x %02x %02x %02x %02x\n", p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7], p[8], p[9], p[10], p[11], p[12], p[13], p[14], p[15]); - p += 16; + p += 16; + } } + puts("OOB:\n"); i = nand->oobsize >> 3; p = oobbuf; @@ -91,10 +100,13 @@ static int nand_dump(nand_info_t *nand, ulong off, int only_oob, int repeat) p[0], p[1], p[2], p[3], p[4], p[5], p[6], p[7]); p += 8; } - free(datbuf); + +free_all: free(oobbuf); +free_dat: + free(datbuf); - return 0; + return ret; } /* ------------------------------------------------------------------------- */ @@ -604,11 +616,11 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) opts.scrub = 1; else { puts("scrub aborted\n"); - return -1; + return 1; } } else { puts("scrub aborted\n"); - return -1; + return 1; } } ret = nand_erase_opts(nand, &opts); diff --git a/common/cmd_sf.c b/common/cmd_sf.c index 19b0dc9..4af0f0a 100644 --- a/common/cmd_sf.c +++ b/common/cmd_sf.c @@ -151,16 +151,17 @@ static const char *spi_flash_update_block(struct spi_flash *flash, u32 offset, size_t len, const char *buf, char *cmp_buf, size_t *skipped) { debug("offset=%#x, sector_size=%#x, len=%#zx\n", - offset, flash->sector_size, len); + offset, flash->sector_size, len); if (spi_flash_read(flash, offset, len, cmp_buf)) return "read"; if (memcmp(cmp_buf, buf, len) == 0) { debug("Skip region %x size %zx: no change\n", - offset, len); + offset, len); *skipped += len; return NULL; } - if (spi_flash_erase(flash, offset, len)) + /* Erase the entire sector */ + if (spi_flash_erase(flash, offset, flash->sector_size)) return "erase"; if (spi_flash_write(flash, offset, len, buf)) return "write"; @@ -200,7 +201,7 @@ static int spi_flash_update(struct spi_flash *flash, u32 offset, todo = min(end - buf, flash->sector_size); if (get_timer(last_update) > 100) { printf(" \rUpdating, %zu%% %lu B/s", - 100 - (end - buf) / scale, + 100 - (end - buf) / scale, bytes_per_second(buf - start_buf, start_time)); last_update = get_timer(0); @@ -220,9 +221,9 @@ static int spi_flash_update(struct spi_flash *flash, u32 offset, delta = get_timer(start_time); printf("%zu bytes written, %zu bytes skipped", len - skipped, - skipped); + skipped); printf(" in %ld.%lds, speed %ld B/s\n", - delta / 1000, delta % 1000, bytes_per_second(len, start_time)); + delta / 1000, delta % 1000, bytes_per_second(len, start_time)); return 0; } @@ -252,7 +253,7 @@ static int do_spi_flash_read_write(int argc, char * const argv[]) /* Consistency checking */ if (offset + len > flash->size) { printf("ERROR: attempting %s past flash size (%#x)\n", - argv[0], flash->size); + argv[0], flash->size); return 1; } @@ -262,9 +263,9 @@ static int do_spi_flash_read_write(int argc, char * const argv[]) return 1; } - if (strcmp(argv[0], "update") == 0) + if (strcmp(argv[0], "update") == 0) { ret = spi_flash_update(flash, offset, len, buf); - else if (strncmp(argv[0], "read", 4) == 0 || + } else if (strncmp(argv[0], "read", 4) == 0 || strncmp(argv[0], "write", 5) == 0) { int read; @@ -275,7 +276,7 @@ static int do_spi_flash_read_write(int argc, char * const argv[]) ret = spi_flash_write(flash, offset, len, buf); printf("SF: %zu bytes @ %#x %s: %s\n", (size_t)len, (u32)offset, - read ? "Read" : "Written", ret ? "ERROR" : "OK"); + read ? "Read" : "Written", ret ? "ERROR" : "OK"); } unmap_physmem(buf, len); @@ -304,13 +305,13 @@ static int do_spi_flash_erase(int argc, char * const argv[]) /* Consistency checking */ if (offset + len > flash->size) { printf("ERROR: attempting %s past flash size (%#x)\n", - argv[0], flash->size); + argv[0], flash->size); return 1; } ret = spi_flash_erase(flash, offset, len); printf("SF: %zu bytes @ %#x Erased: %s\n", (size_t)len, (u32)offset, - ret ? "ERROR" : "OK"); + ret ? "ERROR" : "OK"); return ret == 0 ? 0 : 1; } @@ -470,7 +471,8 @@ static int do_spi_flash_test(int argc, char * const argv[]) } #endif /* CONFIG_CMD_SF_TEST */ -static int do_spi_flash(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_spi_flash(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) { const char *cmd; int ret; @@ -526,7 +528,7 @@ U_BOOT_CMD( "SPI flash sub-system", "probe [[bus:]cs] [hz] [mode] - init flash device on given SPI bus\n" " and chip select\n" - "sf read addr offset len - read `len' bytes starting at\n" + "sf read addr offset len - read `len' bytes starting at\n" " `offset' to memory at `addr'\n" "sf write addr offset len - write `len' bytes from memory\n" " at `addr' to flash at `offset'\n" diff --git a/common/env_common.c b/common/env_common.c index f387f9a..1ac3377 100644 --- a/common/env_common.c +++ b/common/env_common.c @@ -140,7 +140,6 @@ int set_default_vars(int nvars, char * const vars[]) H_NOCLEAR | H_INTERACTIVE, nvars, vars); } -#ifndef CONFIG_SPL_BUILD /* * Check if CRC is valid and (if yes) import the environment. * Note that "buf" may or may not be aligned. @@ -172,7 +171,6 @@ int env_import(const char *buf, int check) return 0; } -#endif void env_relocate(void) { diff --git a/common/env_nand.c b/common/env_nand.c index 9a6b8a6..7530962 100644 --- a/common/env_nand.c +++ b/common/env_nand.c @@ -152,72 +152,57 @@ int writeenv(size_t offset, u_char *buf) return 0; } -#ifdef CONFIG_ENV_OFFSET_REDUND -static unsigned char env_flags; +struct env_location { + const char *name; + const nand_erase_options_t erase_opts; +}; -int saveenv(void) +static int erase_and_write_env(const struct env_location *location, + u_char *env_new) { - env_t env_new; - ssize_t len; - char *res; - int ret = 0; - nand_erase_options_t nand_erase_options; + int ret = 0; - memset(&nand_erase_options, 0, sizeof(nand_erase_options)); - nand_erase_options.length = CONFIG_ENV_RANGE; - - if (CONFIG_ENV_RANGE < CONFIG_ENV_SIZE) - return 1; - - res = (char *)&env_new.data; - len = hexport_r(&env_htab, '\0', 0, &res, ENV_SIZE, 0, NULL); - if (len < 0) { - error("Cannot export environment: errno = %d\n", errno); - return 1; - } - env_new.crc = crc32(0, env_new.data, ENV_SIZE); - env_new.flags = ++env_flags; /* increase the serial */ - - if (gd->env_valid == 1) { - puts("Erasing redundant NAND...\n"); - nand_erase_options.offset = CONFIG_ENV_OFFSET_REDUND; - if (nand_erase_opts(&nand_info[0], &nand_erase_options)) - return 1; - - puts("Writing to redundant NAND... "); - ret = writeenv(CONFIG_ENV_OFFSET_REDUND, (u_char *)&env_new); - } else { - puts("Erasing NAND...\n"); - nand_erase_options.offset = CONFIG_ENV_OFFSET; - if (nand_erase_opts(&nand_info[0], &nand_erase_options)) - return 1; - - puts("Writing to NAND... "); - ret = writeenv(CONFIG_ENV_OFFSET, (u_char *)&env_new); - } - if (ret) { - puts("FAILED!\n"); + printf("Erasing %s...\n", location->name); + if (nand_erase_opts(&nand_info[0], &location->erase_opts)) return 1; - } - - puts("done\n"); - gd->env_valid = gd->env_valid == 2 ? 1 : 2; + printf("Writing to %s... ", location->name); + ret = writeenv(location->erase_opts.offset, env_new); + puts(ret ? "FAILED!\n" : "OK\n"); return ret; } -#else /* ! CONFIG_ENV_OFFSET_REDUND */ + +#ifdef CONFIG_ENV_OFFSET_REDUND +static unsigned char env_flags; +#endif + int saveenv(void) { int ret = 0; ALLOC_CACHE_ALIGN_BUFFER(env_t, env_new, 1); ssize_t len; char *res; - nand_erase_options_t nand_erase_options; + int env_idx = 0; + static const struct env_location location[] = { + { + .name = "NAND", + .erase_opts = { + .length = CONFIG_ENV_RANGE, + .offset = CONFIG_ENV_OFFSET, + }, + }, +#ifdef CONFIG_ENV_OFFSET_REDUND + { + .name = "redundant NAND", + .erase_opts = { + .length = CONFIG_ENV_RANGE, + .offset = CONFIG_ENV_OFFSET_REDUND, + }, + }, +#endif + }; - memset(&nand_erase_options, 0, sizeof(nand_erase_options)); - nand_erase_options.length = CONFIG_ENV_RANGE; - nand_erase_options.offset = CONFIG_ENV_OFFSET; if (CONFIG_ENV_RANGE < CONFIG_ENV_SIZE) return 1; @@ -228,22 +213,29 @@ int saveenv(void) error("Cannot export environment: errno = %d\n", errno); return 1; } - env_new->crc = crc32(0, env_new->data, ENV_SIZE); - - puts("Erasing Nand...\n"); - if (nand_erase_opts(&nand_info[0], &nand_erase_options)) - return 1; + env_new->crc = crc32(0, env_new->data, ENV_SIZE); +#ifdef CONFIG_ENV_OFFSET_REDUND + env_new->flags = ++env_flags; /* increase the serial */ + env_idx = (gd->env_valid == 1); +#endif - puts("Writing to Nand... "); - if (writeenv(CONFIG_ENV_OFFSET, (u_char *)env_new)) { - puts("FAILED!\n"); - return 1; + ret = erase_and_write_env(&location[env_idx], (u_char *)env_new); +#ifdef CONFIG_ENV_OFFSET_REDUND + if (!ret) { + /* preset other copy for next write */ + gd->env_valid = gd->env_valid == 2 ? 1 : 2; + return ret; } - puts("done\n"); + env_idx = (env_idx + 1) & 1; + ret = erase_and_write_env(&location[env_idx], (u_char *)env_new); + if (!ret) + printf("Warning: primary env write failed," + " redundancy is lost!\n"); +#endif + return ret; } -#endif /* CONFIG_ENV_OFFSET_REDUND */ #endif /* CMD_SAVEENV */ int readenv(size_t offset, u_char *buf) diff --git a/common/env_sf.c b/common/env_sf.c index e3e1897..9f806fb 100644 --- a/common/env_sf.c +++ b/common/env_sf.c @@ -7,7 +7,7 @@ * * (C) Copyright 2008 Atmel Corporation * - * SPDX-License-Identifier: GPL-2.0+ + * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> #include <environment.h> diff --git a/common/image-fit.c b/common/image-fit.c index 683c1a5..199b4ed 100644 --- a/common/image-fit.c +++ b/common/image-fit.c @@ -343,6 +343,17 @@ void fit_image_print(const void *fit, int image_noffset, const char *p) else printf("%s\n", desc); + if (IMAGE_ENABLE_TIMESTAMP) { + time_t timestamp; + + ret = fit_get_timestamp(fit, 0, ×tamp); + printf("%s Created: ", p); + if (ret) + printf("unavailable\n"); + else + genimg_print_time(timestamp); + } + fit_image_get_type(fit, image_noffset, &type); printf("%s Type: %s\n", p, genimg_get_type_name(type)); diff --git a/common/lcd.c b/common/lcd.c index 8d5c63c..990650c 100644 --- a/common/lcd.c +++ b/common/lcd.c @@ -51,7 +51,6 @@ /* ** FONT DATA */ /************************************************************************/ #include <video_font.h> /* Get font data, width and height */ -#include <video_font_data.h> /************************************************************************/ /* ** LOGO DATA */ diff --git a/common/spl/spl.c b/common/spl/spl.c index d6b0e01..da31457 100644 --- a/common/spl/spl.c +++ b/common/spl/spl.c @@ -85,8 +85,9 @@ void spl_parse_image_header(const struct image_header *header) } spl_image.os = image_get_os(header); spl_image.name = image_get_name(header); - debug("spl: payload image: %s load addr: 0x%x size: %d\n", - spl_image.name, spl_image.load_addr, spl_image.size); + debug("spl: payload image: %.*s load addr: 0x%x size: %d\n", + sizeof(spl_image.name), spl_image.name, + spl_image.load_addr, spl_image.size); } else { /* Signature not found - assume u-boot.bin */ debug("mkimage signature not found - ih_magic = %x\n", diff --git a/common/stdio.c b/common/stdio.c index 721e9a1..844f98c 100644 --- a/common/stdio.c +++ b/common/stdio.c @@ -196,9 +196,6 @@ int stdio_init (void) /* Initialize the list */ INIT_LIST_HEAD(&(devs.list)); -#ifdef CONFIG_ARM_DCC - drv_arm_dcc_init (); -#endif #ifdef CONFIG_SYS_I2C i2c_init_all(); #else diff --git a/common/usb.c b/common/usb.c index f740e5e..c97f522 100644 --- a/common/usb.c +++ b/common/usb.c @@ -323,6 +323,7 @@ static int usb_set_maxpacket(struct usb_device *dev) /******************************************************************************* * Parse the config, located in buffer, and fills the dev->config structure. * Note that all little/big endian swapping are done automatically. + * (wTotalLength has already been swapped and sanitized when it was read.) */ static int usb_parse_config(struct usb_device *dev, unsigned char *buffer, int cfgno) @@ -343,24 +344,43 @@ static int usb_parse_config(struct usb_device *dev, head->bDescriptorType); return -1; } - memcpy(&dev->config, buffer, buffer[0]); - le16_to_cpus(&(dev->config.desc.wTotalLength)); + if (head->bLength != USB_DT_CONFIG_SIZE) { + printf("ERROR: Invalid USB CFG length (%d)\n", head->bLength); + return -1; + } + memcpy(&dev->config, head, USB_DT_CONFIG_SIZE); dev->config.no_of_if = 0; index = dev->config.desc.bLength; /* Ok the first entry must be a configuration entry, * now process the others */ head = (struct usb_descriptor_header *) &buffer[index]; - while (index + 1 < dev->config.desc.wTotalLength) { + while (index + 1 < dev->config.desc.wTotalLength && head->bLength) { switch (head->bDescriptorType) { case USB_DT_INTERFACE: + if (head->bLength != USB_DT_INTERFACE_SIZE) { + printf("ERROR: Invalid USB IF length (%d)\n", + head->bLength); + break; + } + if (index + USB_DT_INTERFACE_SIZE > + dev->config.desc.wTotalLength) { + puts("USB IF descriptor overflowed buffer!\n"); + break; + } if (((struct usb_interface_descriptor *) \ - &buffer[index])->bInterfaceNumber != curr_if_num) { + head)->bInterfaceNumber != curr_if_num) { /* this is a new interface, copy new desc */ ifno = dev->config.no_of_if; + if (ifno >= USB_MAXINTERFACES) { + puts("Too many USB interfaces!\n"); + /* try to go on with what we have */ + return 1; + } if_desc = &dev->config.if_desc[ifno]; dev->config.no_of_if++; - memcpy(if_desc, &buffer[index], buffer[index]); + memcpy(if_desc, head, + USB_DT_INTERFACE_SIZE); if_desc->no_of_ep = 0; if_desc->num_altsetting = 1; curr_if_num = @@ -374,12 +394,31 @@ static int usb_parse_config(struct usb_device *dev, } break; case USB_DT_ENDPOINT: + if (head->bLength != USB_DT_ENDPOINT_SIZE) { + printf("ERROR: Invalid USB EP length (%d)\n", + head->bLength); + break; + } + if (index + USB_DT_ENDPOINT_SIZE > + dev->config.desc.wTotalLength) { + puts("USB EP descriptor overflowed buffer!\n"); + break; + } + if (ifno < 0) { + puts("Endpoint descriptor out of order!\n"); + break; + } epno = dev->config.if_desc[ifno].no_of_ep; if_desc = &dev->config.if_desc[ifno]; + if (epno > USB_MAXENDPOINTS) { + printf("Interface %d has too many endpoints!\n", + if_desc->desc.bInterfaceNumber); + return 1; + } /* found an endpoint */ if_desc->no_of_ep++; - memcpy(&if_desc->ep_desc[epno], - &buffer[index], buffer[index]); + memcpy(&if_desc->ep_desc[epno], head, + USB_DT_ENDPOINT_SIZE); ep_wMaxPacketSize = get_unaligned(&dev->config.\ if_desc[ifno].\ ep_desc[epno].\ @@ -392,9 +431,23 @@ static int usb_parse_config(struct usb_device *dev, debug("if %d, ep %d\n", ifno, epno); break; case USB_DT_SS_ENDPOINT_COMP: + if (head->bLength != USB_DT_SS_EP_COMP_SIZE) { + printf("ERROR: Invalid USB EPC length (%d)\n", + head->bLength); + break; + } + if (index + USB_DT_SS_EP_COMP_SIZE > + dev->config.desc.wTotalLength) { + puts("USB EPC descriptor overflowed buffer!\n"); + break; + } + if (ifno < 0 || epno < 0) { + puts("EPC descriptor out of order!\n"); + break; + } if_desc = &dev->config.if_desc[ifno]; - memcpy(&if_desc->ss_ep_comp_desc[epno], - &buffer[index], buffer[index]); + memcpy(&if_desc->ss_ep_comp_desc[epno], head, + USB_DT_SS_EP_COMP_SIZE); break; default: if (head->bLength == 0) @@ -473,7 +526,7 @@ int usb_get_configuration_no(struct usb_device *dev, unsigned char *buffer, int cfgno) { int result; - unsigned int tmp; + unsigned int length; struct usb_config_descriptor *config; config = (struct usb_config_descriptor *)&buffer[0]; @@ -487,16 +540,18 @@ int usb_get_configuration_no(struct usb_device *dev, "(expected %i, got %i)\n", 9, result); return -1; } - tmp = le16_to_cpu(config->wTotalLength); + length = le16_to_cpu(config->wTotalLength); - if (tmp > USB_BUFSIZ) { - printf("usb_get_configuration_no: failed to get " \ - "descriptor - too long: %d\n", tmp); + if (length > USB_BUFSIZ) { + printf("%s: failed to get descriptor - too long: %d\n", + __func__, length); return -1; } - result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno, buffer, tmp); - debug("get_conf_no %d Result %d, wLength %d\n", cfgno, result, tmp); + result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno, buffer, length); + debug("get_conf_no %d Result %d, wLength %d\n", cfgno, result, length); + config->wTotalLength = length; /* validated, with CPU byte order */ + return result; } diff --git a/common/usb_hub.c b/common/usb_hub.c index 754d436..ffac0e7 100644 --- a/common/usb_hub.c +++ b/common/usb_hub.c @@ -44,6 +44,10 @@ static struct usb_hub_device hub_dev[USB_MAX_HUB]; static int usb_hub_index; +__weak void usb_hub_reset_devices(int port) +{ + return; +} static int usb_get_hub_descriptor(struct usb_device *dev, void *data, int size) { @@ -110,7 +114,7 @@ static void usb_hub_power_on(struct usb_hub_device *hub) ret = usb_get_port_status(dev, i + 1, portsts); if (ret < 0) { debug("port %d: get_port_status failed\n", i + 1); - return; + continue; } /* @@ -125,7 +129,7 @@ static void usb_hub_power_on(struct usb_hub_device *hub) portstatus = le16_to_cpu(portsts->wPortStatus); if (portstatus & (USB_PORT_STAT_POWER << 1)) { debug("port %d: Port power change failed\n", i + 1); - return; + continue; } } @@ -302,7 +306,7 @@ void usb_hub_port_connect_change(struct usb_device *dev, int port) static int usb_hub_configure(struct usb_device *dev) { - int i; + int i, length; ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buffer, USB_BUFSIZ); unsigned char *bitmap; short hubCharacteristics; @@ -323,20 +327,14 @@ static int usb_hub_configure(struct usb_device *dev) } descriptor = (struct usb_hub_descriptor *)buffer; - /* silence compiler warning if USB_BUFSIZ is > 256 [= sizeof(char)] */ - i = descriptor->bLength; - if (i > USB_BUFSIZ) { - debug("usb_hub_configure: failed to get hub " \ - "descriptor - too long: %d\n", descriptor->bLength); - return -1; - } + length = min(descriptor->bLength, sizeof(struct usb_hub_descriptor)); - if (usb_get_hub_descriptor(dev, buffer, descriptor->bLength) < 0) { + if (usb_get_hub_descriptor(dev, buffer, length) < 0) { debug("usb_hub_configure: failed to get hub " \ "descriptor 2nd giving up %lX\n", dev->status); return -1; } - memcpy((unsigned char *)&hub->desc, buffer, descriptor->bLength); + memcpy((unsigned char *)&hub->desc, buffer, length); /* adjust 16bit values */ put_unaligned(le16_to_cpu(get_unaligned( &descriptor->wHubCharacteristics)), @@ -426,6 +424,14 @@ static int usb_hub_configure(struct usb_device *dev) "" : "no "); usb_hub_power_on(hub); + /* + * Reset any devices that may be in a bad state when applying + * the power. This is a __weak function. Resetting of the devices + * should occur in the board file of the device. + */ + for (i = 0; i < dev->maxchild; i++) + usb_hub_reset_devices(i + 1); + for (i = 0; i < dev->maxchild; i++) { ALLOC_CACHE_ALIGN_BUFFER(struct usb_port_status, portsts, 1); unsigned short portstatus, portchange; diff --git a/common/usb_kbd.c b/common/usb_kbd.c index 2ca3767..1ad67ca 100644 --- a/common/usb_kbd.c +++ b/common/usb_kbd.c @@ -104,6 +104,11 @@ struct usb_kbd_pdata { uint8_t flags; }; +extern int __maybe_unused net_busy_flag; + +/* The period of time between two calls of usb_kbd_testc(). */ +static unsigned long __maybe_unused kbd_testc_tms; + /* Generic keyboard event polling. */ void usb_kbd_generic_poll(void) { @@ -349,6 +354,16 @@ static int usb_kbd_testc(void) struct usb_device *usb_kbd_dev; struct usb_kbd_pdata *data; +#ifdef CONFIG_CMD_NET + /* + * If net_busy_flag is 1, NET transfer is running, + * then we check key-pressed every second (first check may be + * less than 1 second) to improve TFTP booting performance. + */ + if (net_busy_flag && (get_timer(kbd_testc_tms) < CONFIG_SYS_HZ)) + return 0; + kbd_testc_tms = get_timer(0); +#endif dev = stdio_get_by_name(DEVNAME); usb_kbd_dev = (struct usb_device *)dev->priv; data = usb_kbd_dev->privptr; @@ -13,6 +13,12 @@ SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \ export SHELL +ifeq ($(CONFIG_TPL_BUILD),y) +SPL_BIN := u-boot-tpl +else +SPL_BIN := u-boot-spl +endif + ifeq ($(CURDIR),$(SRCTREE)) dir := else @@ -22,7 +28,11 @@ endif ifneq ($(OBJTREE),$(SRCTREE)) # Create object files for SPL in a separate directory ifeq ($(CONFIG_SPL_BUILD),y) +ifeq ($(CONFIG_TPL_BUILD),y) +obj := $(if $(dir),$(TPLTREE)/$(dir)/,$(TPLTREE)/) +else obj := $(if $(dir),$(SPLTREE)/$(dir)/,$(SPLTREE)/) +endif else obj := $(if $(dir),$(OBJTREE)/$(dir)/,$(OBJTREE)/) endif @@ -32,8 +42,12 @@ $(shell mkdir -p $(obj)) else # Create object files for SPL in a separate directory ifeq ($(CONFIG_SPL_BUILD),y) +ifeq ($(CONFIG_TPL_BUILD),y) +obj := $(if $(dir),$(TPLTREE)/$(dir)/,$(TPLTREE)/) +else obj := $(if $(dir),$(SPLTREE)/$(dir)/,$(SPLTREE)/) +endif $(shell mkdir -p $(obj)) else obj := @@ -119,6 +133,7 @@ endif # Usage gcc-ver := $(call cc-version) cc-version = $(shell $(SHELL) $(SRCTREE)/tools/gcc-version.sh $(CC)) binutils-version = $(shell $(SHELL) $(SRCTREE)/tools/binutils-version.sh $(AS)) +dtc-version = $(shell $(SHELL) $(SRCTREE)/tools/dtc-version.sh $(DTC)) # # Include the make variables (CC, etc...) @@ -144,7 +159,18 @@ CHECK = sparse ######################################################################### # Load generated board configuration +ifeq ($(CONFIG_TPL_BUILD),y) +# Include TPL autoconf +sinclude $(OBJTREE)/include/tpl-autoconf.mk +else +ifeq ($(CONFIG_SPL_BUILD),y) +# Include SPL autoconf +sinclude $(OBJTREE)/include/spl-autoconf.mk +else +# Include normal autoconf sinclude $(OBJTREE)/include/autoconf.mk +endif +endif sinclude $(OBJTREE)/include/config.mk # Some architecture config.mk files need to know what CPUDIR is set to, @@ -223,12 +249,19 @@ ifneq ($(CONFIG_SPL_PAD_TO),) CPPFLAGS += -DCONFIG_SPL_PAD_TO=$(CONFIG_SPL_PAD_TO) endif +ifneq ($(CONFIG_TPL_PAD_TO),) +CPPFLAGS += -DCONFIG_TPL_PAD_TO=$(CONFIG_TPL_PAD_TO) +endif + ifneq ($(CONFIG_UBOOT_PAD_TO),) CPPFLAGS += -DCONFIG_UBOOT_PAD_TO=$(CONFIG_UBOOT_PAD_TO) endif ifeq ($(CONFIG_SPL_BUILD),y) CPPFLAGS += -DCONFIG_SPL_BUILD +ifeq ($(CONFIG_TPL_BUILD),y) +CPPFLAGS += -DCONFIG_TPL_BUILD +endif endif # Does this architecture support generic board init? @@ -300,9 +333,9 @@ ifneq ($(CONFIG_SYS_TEXT_BASE),) LDFLAGS_u-boot += -Ttext $(CONFIG_SYS_TEXT_BASE) endif -LDFLAGS_u-boot-spl += -T $(obj)u-boot-spl.lds $(LDFLAGS_FINAL) +LDFLAGS_$(SPL_BIN) += -T $(obj)u-boot-spl.lds $(LDFLAGS_FINAL) ifneq ($(CONFIG_SPL_TEXT_BASE),) -LDFLAGS_u-boot-spl += -Ttext $(CONFIG_SPL_TEXT_BASE) +LDFLAGS_$(SPL_BIN) += -Ttext $(CONFIG_SPL_TEXT_BASE) endif # Linus' kernel sanity checking tool diff --git a/doc/README.SPL b/doc/README.SPL index ac9a213..312a6a6 100644 --- a/doc/README.SPL +++ b/doc/README.SPL @@ -67,7 +67,7 @@ CONFIG_SPL_POST_MEM_SUPPORT (post/drivers/memory.o) CONFIG_SPL_NAND_LOAD (drivers/mtd/nand/nand_spl_load.o) CONFIG_SPL_SPI_LOAD (drivers/mtd/spi/spi_spl_load.o) CONFIG_SPL_RAM_DEVICE (common/spl/spl.c) - +CONFIG_SPL_WATCHDOG_SUPPORT (drivers/watchdog/libwatchdog.o) Normally CPU is assumed to be the same between the SPL and normal u-boot build. However it is possible to specify a different CPU for diff --git a/doc/README.TPL b/doc/README.TPL new file mode 100644 index 0000000..1df03b9 --- /dev/null +++ b/doc/README.TPL @@ -0,0 +1,45 @@ +Generic TPL framework +===================== + +Overview +-------- + +TPL---Third Program Loader. + +Due to the SPL on some boards(powerpc mpc85xx) has a size limit and cannot +be compatible with all the external device(e.g. DDR). So add a tertiary +program loader (TPL) to enable a loader stub loaded by the code from the +SPL. It loads the final uboot image into DDR, then jump to it to begin +execution. Now, only the powerpc mpc85xx has this requirement and will +implemente it. + +Keep consistent with SPL, with this framework almost all source files for a +board can be reused. No code duplication or symlinking is necessary anymore. + +How it works +------------ + +There has been a directory TOPDIR/spl which contains only a Makefile. The +Makefile is shared by SPL and TPL. + +The object files are built separately for SPL/TPL and placed in the +directory spl/tpl. The final binaries which are generated are +u-boot-{spl|tpl}, u-boot-{spl|tpl}.bin and u-boot-{spl|tpl}.map. + +During the TPL build a variable named CONFIG_TPL_BUILD is exported in the +make environment and also appended to CPPFLAGS with -DCONFIG_TPL_BUILD. + +The SPL options are shared by SPL and TPL, the board config file should +determine which SPL options to choose based on whether CONFIG_TPL_BUILD +is set. Source files can be compiled for TPL with options choosed in the +board config file. + +For example: + +spl/Makefile: +LIBS-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/libcommon.o + +CONFIG_SPL_LIBCOMMON_SUPPORT is defined in board config file: +#ifdef CONFIG_TPL_BUILD +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#endif diff --git a/doc/README.atmel_pmecc b/doc/README.atmel_pmecc index b483744..41f3bd7 100644 --- a/doc/README.atmel_pmecc +++ b/doc/README.atmel_pmecc @@ -19,17 +19,6 @@ To use PMECC in this driver, the user needs to set: It can be 2, 4, 8, 12 or 24. 2. The PMECC sector size: CONFIG_PMECC_SECTOR_SIZE. It only can be 512 or 1024. - 3. The PMECC index lookup table's offsets in ROM code: CONFIG_PMECC_INDEX_TABLE_OFFSET. - In the chip datasheet section "Boot Stragegies", you can find - two Galois Field Table in the ROM code. One table is for 512-bytes - sector. Another is for 1024-byte sector. Each Galois Field includes - two sub-table: indext table & alpha table. - In the beginning of each Galois Field Table is the index table, - Alpha table is in the following. - So the index table's offset is same as the Galois Field Table. - - Please set CONFIG_PMECC_INDEX_TABLE_OFFSET correctly according the - Galois Field Table's offset base on the sector size you used. Take AT91SAM9X5EK as an example, the board definition file likes: @@ -38,7 +27,4 @@ Take AT91SAM9X5EK as an example, the board definition file likes: #define CONFIG_ATMEL_NAND_HW_PMECC 1 #define CONFIG_PMECC_CAP 2 #define CONFIG_PMECC_SECTOR_SIZE 512 -#define CONFIG_PMECC_INDEX_TABLE_OFFSET 0x8000 -NOTE: If you use 1024 as the sector size, then need set 0x10000 as the - CONFIG_PMECC_INDEX_TABLE_OFFSET diff --git a/doc/README.fdt-control b/doc/README.fdt-control index 4b29060..86bae68 100644 --- a/doc/README.fdt-control +++ b/doc/README.fdt-control @@ -119,8 +119,7 @@ file into board/<vendor>/dts/<name>.dts This should include your CPU or SOC's device tree file, placed in -arch/<arch>/dts, and then make any adjustments required. The name of this -is CONFIG_ARCH_DEVICE_TREE.dts. +arch/<arch>/dts, and then make any adjustments required. If CONFIG_OF_EMBED is defined, then it will be picked up and built into the U-Boot image (including u-boot.bin). diff --git a/doc/README.mpc85xx-sd-spi-boot b/doc/README.mpc85xx-sd-spi-boot new file mode 100644 index 0000000..d5043cc --- /dev/null +++ b/doc/README.mpc85xx-sd-spi-boot @@ -0,0 +1,81 @@ +---------------------------------------- +Booting from On-Chip ROM (eSDHC or eSPI) +---------------------------------------- + +boot_format is a tool to write SD bootable images to a filesystem and build +SD/SPI images to a binary file for writing later. + +When booting from an SD card/MMC, boot_format puts the configuration file and +the RAM-based U-Boot image on the card. +When booting from an EEPROM, boot_format generates a binary image that is used +to boot from this EEPROM. + +Where to get boot_format: +======================== + +you can browse it online at: +http://git.freescale.com/git/cgit.cgi/ppc/sdk/boot-format.git/ + +Building +======== + +Run the following to build this project + + $ make + +Execution +========= + +boot_format runs under a regular Linux machine and requires a super user mode +to run. Execute boot_format as follows. + +For building SD images by writing directly to a file system on SD media: + + $ boot_format $config u-boot.bin -sd $device + +Where $config is the included config.dat file for your platform and $device +is the target block device for the SD media on your computer. + +For build binary images directly a local file: + + $ boot_format $config u-boot.bin -spi $file + +Where $file is the target file. Also keep in mind the u-boot.bin file needs +to be the u-boot built for your particular platform and target media. + +Example: To generate a u-boot.bin for a P1022DS booting from SD, run the +following in the u-boot repository: + + $ make P1022DS_SDCARD + +Configuration Files +=================== + +Below are the configuration files to be used with a particular platform. Keep +in mind that some of these config files are tied to the platforms DDR speed. +Please see the SoC reference manual for more documentation. + +P1022DS config_sram_p1022ds.dat +P2020DS config_sram_p2020ds.dat +P2010DS config_sram_p2020ds.dat +P1020RDB config_ddr2_1g_p1020rdb_533M.dat +P1020RDB config_ddr2_1g_p1020rdb_667M.dat +P2020RDB config_ddr2_1g_p2020rdb_800M.dat +P2020RDB config_ddr2_1g_p2020rdb_667M.dat +P2020RDB config_ddr3_1gb_64bit_p2020rdb_pc.dat +P2010RDB config_ddr3_1gb_64bit_p2020rdb_pc.dat +P1020RDB config_ddr3_1gb_p1_p2_rdb_pc_800M.dat +P1011RDB config_ddr3_1gb_p1_p2_rdb_pc_800M.dat +P1010RDB config_ddr3_1gb_p1010rdb_800M.dat +P1014RDB config_ddr3_1gb_p1014rdb_800M.dat +P1021RDB config_ddr3_1gb_p1_p2_rdb_pc_800M.dat +P1012RDB config_ddr3_1gb_p1_p2_rdb_pc_800M.dat +P1022DS config_ddr3_2gb_p1022ds.dat +P1013DS config_ddr3_2gb_p1022ds.dat +P1024RDB config_ddr3_1gb_p1_p2_rdb_pc_667M.dat +P1013RDB config_ddr3_1gb_p1_p2_rdb_pc_667M.dat +P1025RDB config_ddr3_1gb_p1_p2_rdb_pc_667M.dat +P1016RDB config_ddr3_1gb_p1_p2_rdb_pc_667M.dat +P1020UTM config_ddr3_1gb_p1_p2_rdb_pc_800M.dat +P1020MBG config_ddr3_1gb_p1_p2_rdb_pc_800M.dat +MPC8536DS config_ddr2_512m_mpc8536ds_667M.dat diff --git a/doc/README.scrapyard b/doc/README.scrapyard index a0f1fa3..87b1dfe 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -11,9 +11,10 @@ easily if here is something they might want to dig for... Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= -Alaska8220 powerpc mpc8220 - - -Yukon8220 powerpc mpc8220 - - -sorcery powerpc mpc8220 - - +CANBT powerpc 405CR - - Matthias Fuchs <matthias.fuchs@esd.eu> +Alaska8220 powerpc mpc8220 d6ed322 2013-05-11 +Yukon8220 powerpc mpc8220 d6ed322 2013-05-11 +sorcery powerpc mpc8220 d6ed322 2013-05-11 smdk6400 arm arm1176 52587f1 2013-04-12 Zhong Hongbo <bocui107@gmail.com> ns9750dev arm arm926ejs 4cfc611 2013-02-28 Markus Pietrek <mpietrek@fsforth.de> AMX860 powerpc mpc860 1b0757e 2012-10-28 Wolfgang Denk <wd@denx.de> diff --git a/drivers/dfu/dfu.c b/drivers/dfu/dfu.c index b8870ec..d73d510 100644 --- a/drivers/dfu/dfu.c +++ b/drivers/dfu/dfu.c @@ -16,9 +16,20 @@ #include <linux/list.h> #include <linux/compiler.h> +static bool dfu_reset_request; static LIST_HEAD(dfu_list); static int dfu_alt_num; +bool dfu_reset(void) +{ + return dfu_reset_request; +} + +void dfu_trigger_reset() +{ + dfu_reset_request = true; +} + static int dfu_find_alt_num(const char *s) { int i = 0; diff --git a/drivers/dfu/dfu_nand.c b/drivers/dfu/dfu_nand.c index 2a01cc1..0ec12cf 100644 --- a/drivers/dfu/dfu_nand.c +++ b/drivers/dfu/dfu_nand.c @@ -136,11 +136,43 @@ static int dfu_read_medium_nand(struct dfu_entity *dfu, u64 offset, void *buf, return ret; } +static int dfu_flush_medium_nand(struct dfu_entity *dfu) +{ + int ret = 0; + + /* in case of ubi partition, erase rest of the partition */ + if (dfu->data.nand.ubi) { + nand_info_t *nand; + nand_erase_options_t opts; + + if (nand_curr_device < 0 || + nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE || + !nand_info[nand_curr_device].name) { + printf("%s: invalid nand device\n", __func__); + return -1; + } + + nand = &nand_info[nand_curr_device]; + + memset(&opts, 0, sizeof(opts)); + opts.offset = dfu->data.nand.start + dfu->offset + + dfu->bad_skip; + opts.length = dfu->data.nand.start + + dfu->data.nand.size - opts.offset; + ret = nand_erase_opts(nand, &opts); + if (ret != 0) + printf("Failure erase: %d\n", ret); + } + + return ret; +} + int dfu_fill_entity_nand(struct dfu_entity *dfu, char *s) { char *st; int ret, dev, part; + dfu->data.nand.ubi = 0; dfu->dev_type = DFU_DEV_NAND; st = strsep(&s, " "); if (!strcmp(st, "raw")) { @@ -148,7 +180,7 @@ int dfu_fill_entity_nand(struct dfu_entity *dfu, char *s) dfu->data.nand.start = simple_strtoul(s, &s, 16); s++; dfu->data.nand.size = simple_strtoul(s, &s, 16); - } else if (!strcmp(st, "part")) { + } else if ((!strcmp(st, "part")) || (!strcmp(st, "partubi"))) { char mtd_id[32]; struct mtd_device *mtd_dev; u8 part_num; @@ -173,7 +205,8 @@ int dfu_fill_entity_nand(struct dfu_entity *dfu, char *s) dfu->data.nand.start = pi->offset; dfu->data.nand.size = pi->size; - + if (!strcmp(st, "partubi")) + dfu->data.nand.ubi = 1; } else { printf("%s: Memory layout (%s) not supported!\n", __func__, st); return -1; @@ -181,6 +214,7 @@ int dfu_fill_entity_nand(struct dfu_entity *dfu, char *s) dfu->read_medium = dfu_read_medium_nand; dfu->write_medium = dfu_write_medium_nand; + dfu->flush_medium = dfu_flush_medium_nand; /* initial state */ dfu->inited = 0; diff --git a/drivers/dma/apbh_dma.c b/drivers/dma/apbh_dma.c index 96d4c9b..22defcd 100644 --- a/drivers/dma/apbh_dma.c +++ b/drivers/dma/apbh_dma.c @@ -545,6 +545,28 @@ int mxs_dma_go(int chan) } /* + * Execute a continuously running circular DMA descriptor. + * NOTE: This is not intended for general use, but rather + * for the LCD driver in Smart-LCD mode. It allows + * continuous triggering of the RUN bit there. + */ +void mxs_dma_circ_start(int chan, struct mxs_dma_desc *pdesc) +{ + struct mxs_apbh_regs *apbh_regs = + (struct mxs_apbh_regs *)MXS_APBH_BASE; + + mxs_dma_flush_desc(pdesc); + + mxs_dma_enable_irq(chan, 1); + + writel(mxs_dma_cmd_address(pdesc), + &apbh_regs->ch[chan].hw_apbh_ch_nxtcmdar); + writel(1, &apbh_regs->ch[chan].hw_apbh_ch_sema); + writel(1 << (chan + APBH_CTRL0_CLKGATE_CHANNEL_OFFSET), + &apbh_regs->hw_apbh_ctrl0_clr); +} + +/* * Initialize the DMA hardware */ void mxs_dma_init(void) diff --git a/drivers/fpga/zynqpl.c b/drivers/fpga/zynqpl.c index 8cc16fd..14363c9 100644 --- a/drivers/fpga/zynqpl.c +++ b/drivers/fpga/zynqpl.c @@ -23,6 +23,7 @@ #define DEVCFG_STATUS_DMA_CMD_Q_E 0x40000000 #define DEVCFG_STATUS_DMA_DONE_CNT_MASK 0x30000000 #define DEVCFG_STATUS_PCFG_INIT 0x00000010 +#define DEVCFG_MCTRL_PCAP_LPBK 0x00000010 #define DEVCFG_MCTRL_RFIFO_FLUSH 0x00000002 #define DEVCFG_MCTRL_WFIFO_FLUSH 0x00000001 @@ -31,7 +32,7 @@ #endif #ifndef CONFIG_SYS_FPGA_PROG_TIME -#define CONFIG_SYS_FPGA_PROG_TIME CONFIG_SYS_HZ /* 1 s */ +#define CONFIG_SYS_FPGA_PROG_TIME (CONFIG_SYS_HZ * 4) /* 4 s */ #endif int zynq_info(Xilinx_desc *desc) @@ -200,6 +201,9 @@ int zynq_load(Xilinx_desc *desc, const void *buf, size_t bsize) swap = SWAP_DONE; } + /* Clear loopback bit */ + clrbits_le32(&devcfg_base->mctrl, DEVCFG_MCTRL_PCAP_LPBK); + if (!partialbit) { zynq_slcr_devcfg_disable(); diff --git a/drivers/gpio/adi_gpio2.c b/drivers/gpio/adi_gpio2.c index 7a034eb..051073c 100644 --- a/drivers/gpio/adi_gpio2.c +++ b/drivers/gpio/adi_gpio2.c @@ -352,8 +352,8 @@ void special_gpio_free(unsigned gpio) return; } - reserve(special_gpio, gpio); - reserve(peri, gpio); + unreserve(special_gpio, gpio); + unreserve(peri, gpio); set_label(gpio, "free"); } #endif diff --git a/drivers/gpio/at91_gpio.c b/drivers/gpio/at91_gpio.c index 2322914..af09786 100644 --- a/drivers/gpio/at91_gpio.c +++ b/drivers/gpio/at91_gpio.c @@ -1,5 +1,5 @@ /* - * Memory Setup stuff - taken from blob memsetup.S + * Copyright (C) 2013 Bo Shen <voice.shen@atmel.com> * * Copyright (C) 2009 Jens Scharsig (js_at_ng@scharsoft.de) * @@ -8,16 +8,6 @@ * SPDX-License-Identifier: GPL-2.0+ */ -/* - * WARNING: - * - * As the code is right now, it expects all PIO ports A,B,C,... - * to be evenly spaced in the memory map: - * ATMEL_BASE_PIOA + port * sizeof at91pio_t - * This might not necessaryly be true in future Atmel SoCs. - * This code should be fixed to use a pointer array to the ports. - */ - #include <config.h> #include <common.h> #include <asm/io.h> @@ -25,19 +15,42 @@ #include <asm/arch/hardware.h> #include <asm/arch/at91_pio.h> +static struct at91_port *at91_pio_get_port(unsigned port) +{ + switch (port) { + case AT91_PIO_PORTA: + return (struct at91_port *)ATMEL_BASE_PIOA; + case AT91_PIO_PORTB: + return (struct at91_port *)ATMEL_BASE_PIOB; + case AT91_PIO_PORTC: + return (struct at91_port *)ATMEL_BASE_PIOC; +#if (ATMEL_PIO_PORTS > 3) + case AT91_PIO_PORTD: + return (struct at91_port *)ATMEL_BASE_PIOD; +#if (ATMEL_PIO_PORTS > 4) + case AT91_PIO_PORTE: + return (struct at91_port *)ATMEL_BASE_PIOE; +#endif +#endif + default: + return NULL; + } +} + int at91_set_pio_pullup(unsigned port, unsigned pin, int use_pullup) { - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIOA; - u32 mask; + struct at91_port *at91_port = at91_pio_get_port(port); + u32 mask; - if ((port < ATMEL_PIO_PORTS) && (pin < 32)) { + if (at91_port && (pin < 32)) { mask = 1 << pin; if (use_pullup) - writel(1 << pin, &pio->port[port].puer); + writel(1 << pin, &at91_port->puer); else - writel(1 << pin, &pio->port[port].pudr); - writel(mask, &pio->port[port].per); + writel(1 << pin, &at91_port->pudr); + writel(mask, &at91_port->per); } + return 0; } @@ -46,15 +59,16 @@ int at91_set_pio_pullup(unsigned port, unsigned pin, int use_pullup) */ int at91_set_pio_periph(unsigned port, unsigned pin, int use_pullup) { - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIOA; - u32 mask; + struct at91_port *at91_port = at91_pio_get_port(port); + u32 mask; - if ((port < ATMEL_PIO_PORTS) && (pin < 32)) { + if (at91_port && (pin < 32)) { mask = 1 << pin; - writel(mask, &pio->port[port].idr); + writel(mask, &at91_port->idr); at91_set_pio_pullup(port, pin, use_pullup); - writel(mask, &pio->port[port].per); + writel(mask, &at91_port->per); } + return 0; } @@ -63,23 +77,24 @@ int at91_set_pio_periph(unsigned port, unsigned pin, int use_pullup) */ int at91_set_a_periph(unsigned port, unsigned pin, int use_pullup) { - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIOA; - u32 mask; + struct at91_port *at91_port = at91_pio_get_port(port); + u32 mask; - if ((port < ATMEL_PIO_PORTS) && (pin < 32)) { + if (at91_port && (pin < 32)) { mask = 1 << pin; - writel(mask, &pio->port[port].idr); + writel(mask, &at91_port->idr); at91_set_pio_pullup(port, pin, use_pullup); #if defined(CPU_HAS_PIO3) - writel(readl(&pio->port[port].abcdsr1) & ~mask, - &pio->port[port].abcdsr1); - writel(readl(&pio->port[port].abcdsr2) & ~mask, - &pio->port[port].abcdsr2); + writel(readl(&at91_port->abcdsr1) & ~mask, + &at91_port->abcdsr1); + writel(readl(&at91_port->abcdsr2) & ~mask, + &at91_port->abcdsr2); #else - writel(mask, &pio->port[port].asr); + writel(mask, &at91_port->asr); #endif - writel(mask, &pio->port[port].pdr); + writel(mask, &at91_port->pdr); } + return 0; } @@ -88,23 +103,24 @@ int at91_set_a_periph(unsigned port, unsigned pin, int use_pullup) */ int at91_set_b_periph(unsigned port, unsigned pin, int use_pullup) { - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIOA; - u32 mask; + struct at91_port *at91_port = at91_pio_get_port(port); + u32 mask; - if ((port < ATMEL_PIO_PORTS) && (pin < 32)) { + if (at91_port && (pin < 32)) { mask = 1 << pin; - writel(mask, &pio->port[port].idr); + writel(mask, &at91_port->idr); at91_set_pio_pullup(port, pin, use_pullup); #if defined(CPU_HAS_PIO3) - writel(readl(&pio->port[port].abcdsr1) | mask, - &pio->port[port].abcdsr1); - writel(readl(&pio->port[port].abcdsr2) & ~mask, - &pio->port[port].abcdsr2); + writel(readl(&at91_port->abcdsr1) | mask, + &at91_port->abcdsr1); + writel(readl(&at91_port->abcdsr2) & ~mask, + &at91_port->abcdsr2); #else - writel(mask, &pio->port[port].bsr); + writel(mask, &at91_port->bsr); #endif - writel(mask, &pio->port[port].pdr); + writel(mask, &at91_port->pdr); } + return 0; } @@ -114,19 +130,20 @@ int at91_set_b_periph(unsigned port, unsigned pin, int use_pullup) */ int at91_set_c_periph(unsigned port, unsigned pin, int use_pullup) { - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIOA; - u32 mask; + struct at91_port *at91_port = at91_pio_get_port(port); + u32 mask; - if ((port < ATMEL_PIO_PORTS) && (pin < 32)) { + if (at91_port && (pin < 32)) { mask = 1 << pin; - writel(mask, &pio->port[port].idr); + writel(mask, &at91_port->idr); at91_set_pio_pullup(port, pin, use_pullup); - writel(readl(&pio->port[port].abcdsr1) & ~mask, - &pio->port[port].abcdsr1); - writel(readl(&pio->port[port].abcdsr2) | mask, - &pio->port[port].abcdsr2); - writel(mask, &pio->port[port].pdr); + writel(readl(&at91_port->abcdsr1) & ~mask, + &at91_port->abcdsr1); + writel(readl(&at91_port->abcdsr2) | mask, + &at91_port->abcdsr2); + writel(mask, &at91_port->pdr); } + return 0; } @@ -135,19 +152,20 @@ int at91_set_c_periph(unsigned port, unsigned pin, int use_pullup) */ int at91_set_d_periph(unsigned port, unsigned pin, int use_pullup) { - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIOA; - u32 mask; + struct at91_port *at91_port = at91_pio_get_port(port); + u32 mask; - if ((port < ATMEL_PIO_PORTS) && (pin < 32)) { + if (at91_port && (pin < 32)) { mask = 1 << pin; - writel(mask, &pio->port[port].idr); + writel(mask, &at91_port->idr); at91_set_pio_pullup(port, pin, use_pullup); - writel(readl(&pio->port[port].abcdsr1) | mask, - &pio->port[port].abcdsr1); - writel(readl(&pio->port[port].abcdsr2) | mask, - &pio->port[port].abcdsr2); - writel(mask, &pio->port[port].pdr); + writel(readl(&at91_port->abcdsr1) | mask, + &at91_port->abcdsr1); + writel(readl(&at91_port->abcdsr2) | mask, + &at91_port->abcdsr2); + writel(mask, &at91_port->pdr); } + return 0; } #endif @@ -158,16 +176,17 @@ int at91_set_d_periph(unsigned port, unsigned pin, int use_pullup) */ int at91_set_pio_input(unsigned port, u32 pin, int use_pullup) { - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIOA; - u32 mask; + struct at91_port *at91_port = at91_pio_get_port(port); + u32 mask; - if ((port < ATMEL_PIO_PORTS) && (pin < 32)) { + if (at91_port && (pin < 32)) { mask = 1 << pin; - writel(mask, &pio->port[port].idr); + writel(mask, &at91_port->idr); at91_set_pio_pullup(port, pin, use_pullup); - writel(mask, &pio->port[port].odr); - writel(mask, &pio->port[port].per); + writel(mask, &at91_port->odr); + writel(mask, &at91_port->per); } + return 0; } @@ -177,20 +196,21 @@ int at91_set_pio_input(unsigned port, u32 pin, int use_pullup) */ int at91_set_pio_output(unsigned port, u32 pin, int value) { - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIOA; - u32 mask; + struct at91_port *at91_port = at91_pio_get_port(port); + u32 mask; if ((port < ATMEL_PIO_PORTS) && (pin < 32)) { mask = 1 << pin; - writel(mask, &pio->port[port].idr); - writel(mask, &pio->port[port].pudr); + writel(mask, &at91_port->idr); + writel(mask, &at91_port->pudr); if (value) - writel(mask, &pio->port[port].sodr); + writel(mask, &at91_port->sodr); else - writel(mask, &pio->port[port].codr); - writel(mask, &pio->port[port].oer); - writel(mask, &pio->port[port].per); + writel(mask, &at91_port->codr); + writel(mask, &at91_port->oer); + writel(mask, &at91_port->per); } + return 0; } @@ -199,20 +219,21 @@ int at91_set_pio_output(unsigned port, u32 pin, int value) */ int at91_set_pio_deglitch(unsigned port, unsigned pin, int is_on) { - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIOA; - u32 mask; + struct at91_port *at91_port = at91_pio_get_port(port); + u32 mask; - if ((port < ATMEL_PIO_PORTS) && (pin < 32)) { + if (at91_port && (pin < 32)) { mask = 1 << pin; if (is_on) { #if defined(CPU_HAS_PIO3) - writel(mask, &pio->port[port].ifscdr); + writel(mask, &at91_port->ifscdr); #endif - writel(mask, &pio->port[port].ifer); + writel(mask, &at91_port->ifer); } else { - writel(mask, &pio->port[port].ifdr); + writel(mask, &at91_port->ifdr); } } + return 0; } @@ -222,19 +243,20 @@ int at91_set_pio_deglitch(unsigned port, unsigned pin, int is_on) */ int at91_set_pio_debounce(unsigned port, unsigned pin, int is_on, int div) { - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIOA; - u32 mask; + struct at91_port *at91_port = at91_pio_get_port(port); + u32 mask; - if ((port < ATMEL_PIO_PORTS) && (pin < 32)) { + if (at91_port && (pin < 32)) { mask = 1 << pin; if (is_on) { - writel(mask, &pio->port[port].ifscer); - writel(div & PIO_SCDR_DIV, &pio->port[port].scdr); - writel(mask, &pio->port[port].ifer); + writel(mask, &at91_port->ifscer); + writel(div & PIO_SCDR_DIV, &at91_port->scdr); + writel(mask, &at91_port->ifer); } else { - writel(mask, &pio->port[port].ifdr); + writel(mask, &at91_port->ifdr); } } + return 0; } @@ -244,17 +266,18 @@ int at91_set_pio_debounce(unsigned port, unsigned pin, int is_on, int div) */ int at91_set_pio_pulldown(unsigned port, unsigned pin, int is_on) { - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIOA; - u32 mask; + struct at91_port *at91_port = at91_pio_get_port(port); + u32 mask; - if ((port < ATMEL_PIO_PORTS) && (pin < 32)) { + if (at91_port && (pin < 32)) { mask = 1 << pin; - writel(mask, &pio->port[port].pudr); + writel(mask, &at91_port->pudr); if (is_on) - writel(mask, &pio->port[port].ppder); + writel(mask, &at91_port->ppder); else - writel(mask, &pio->port[port].ppddr); + writel(mask, &at91_port->ppddr); } + return 0; } @@ -263,14 +286,15 @@ int at91_set_pio_pulldown(unsigned port, unsigned pin, int is_on) */ int at91_set_pio_disable_schmitt_trig(unsigned port, unsigned pin) { - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIOA; - u32 mask; + struct at91_port *at91_port = at91_pio_get_port(port); + u32 mask; - if ((port < ATMEL_PIO_PORTS) && (pin < 32)) { + if (at91_port && (pin < 32)) { mask = 1 << pin; - writel(readl(&pio->port[port].schmitt) | mask, - &pio->port[port].schmitt); + writel(readl(&at91_port->schmitt) | mask, + &at91_port->schmitt); } + return 0; } #endif @@ -281,16 +305,17 @@ int at91_set_pio_disable_schmitt_trig(unsigned port, unsigned pin) */ int at91_set_pio_multi_drive(unsigned port, unsigned pin, int is_on) { - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIOA; - u32 mask; + struct at91_port *at91_port = at91_pio_get_port(port); + u32 mask; - if ((port < ATMEL_PIO_PORTS) && (pin < 32)) { + if (at91_port && (pin < 32)) { mask = 1 << pin; if (is_on) - writel(mask, &pio->port[port].mder); + writel(mask, &at91_port->mder); else - writel(mask, &pio->port[port].mddr); + writel(mask, &at91_port->mddr); } + return 0; } @@ -299,16 +324,17 @@ int at91_set_pio_multi_drive(unsigned port, unsigned pin, int is_on) */ int at91_set_pio_value(unsigned port, unsigned pin, int value) { - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIOA; - u32 mask; + struct at91_port *at91_port = at91_pio_get_port(port); + u32 mask; - if ((port < ATMEL_PIO_PORTS) && (pin < 32)) { + if (at91_port && (pin < 32)) { mask = 1 << pin; if (value) - writel(mask, &pio->port[port].sodr); + writel(mask, &at91_port->sodr); else - writel(mask, &pio->port[port].codr); + writel(mask, &at91_port->codr); } + return 0; } @@ -317,13 +343,56 @@ int at91_set_pio_value(unsigned port, unsigned pin, int value) */ int at91_get_pio_value(unsigned port, unsigned pin) { - u32 pdsr = 0; - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIOA; - u32 mask; + struct at91_port *at91_port = at91_pio_get_port(port); + u32 pdsr = 0, mask; - if ((port < ATMEL_PIO_PORTS) && (pin < 32)) { + if (at91_port && (pin < 32)) { mask = 1 << pin; - pdsr = readl(&pio->port[port].pdsr) & mask; + pdsr = readl(&at91_port->pdsr) & mask; } + return pdsr != 0; } + +/* Common GPIO API */ + +#define at91_gpio_to_port(gpio) (gpio / 32) +#define at91_gpio_to_pin(gpio) (gpio % 32) + +int gpio_request(unsigned gpio, const char *label) +{ + return 0; +} + +int gpio_free(unsigned gpio) +{ + return 0; +} + +int gpio_direction_input(unsigned gpio) +{ + at91_set_pio_input(at91_gpio_to_port(gpio), + at91_gpio_to_pin(gpio), 0); + return 0; +} + +int gpio_direction_output(unsigned gpio, int value) +{ + at91_set_pio_output(at91_gpio_to_port(gpio), + at91_gpio_to_pin(gpio), value); + return 0; +} + +int gpio_get_value(unsigned gpio) +{ + return at91_get_pio_value(at91_gpio_to_port(gpio), + at91_gpio_to_pin(gpio)); +} + +int gpio_set_value(unsigned gpio, int value) +{ + at91_set_pio_value(at91_gpio_to_port(gpio), + at91_gpio_to_pin(gpio), value); + + return 0; +} diff --git a/drivers/gpio/omap_gpio.c b/drivers/gpio/omap_gpio.c index f16e9ae..13dcf79 100644 --- a/drivers/gpio/omap_gpio.c +++ b/drivers/gpio/omap_gpio.c @@ -2,20 +2,7 @@ * Copyright (c) 2009 Wind River Systems, Inc. * Tom Rix <Tom.Rix@windriver.com> * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0 * * This work is derived from the linux 2.6.27 kernel source * To fetch, use the kernel repository @@ -30,10 +17,6 @@ * * Copyright (C) 2003-2005 Nokia Corporation * Written by Juha Yrjölä <juha.yrjola@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include <common.h> #include <asm/gpio.h> diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c index be13745..7371cd4 100644 --- a/drivers/gpio/pca953x.c +++ b/drivers/gpio/pca953x.c @@ -47,9 +47,6 @@ struct pca953x_chip_ngpio { static struct pca953x_chip_ngpio pca953x_chip_ngpios[] = CONFIG_SYS_I2C_PCA953X_WIDTH; -#define NUM_CHIP_GPIOS (sizeof(pca953x_chip_ngpios) / \ - sizeof(struct pca953x_chip_ngpio)) - /* * Determine the number of GPIO pins supported. If we don't know we assume * 8 pins. @@ -58,7 +55,7 @@ static int pca953x_ngpio(uint8_t chip) { int i; - for (i = 0; i < NUM_CHIP_GPIOS; i++) + for (i = 0; i < ARRAY_SIZE(pca953x_chip_ngpios); i++) if (pca953x_chip_ngpios[i].chip == chip) return pca953x_chip_ngpios[i].ngpio; diff --git a/drivers/i2c/fsl_i2c.c b/drivers/i2c/fsl_i2c.c index 38455e1..291ad94 100644 --- a/drivers/i2c/fsl_i2c.c +++ b/drivers/i2c/fsl_i2c.c @@ -206,9 +206,58 @@ static unsigned int get_i2c_clock(int bus) return gd->arch.i2c1_clk; /* I2C1 clock */ } +static int fsl_i2c_fixup(const struct fsl_i2c *dev) +{ + const unsigned long long timeout = usec2ticks(CONFIG_I2C_MBB_TIMEOUT); + unsigned long long timeval = 0; + int ret = -1; + unsigned int flags = 0; + +#ifdef CONFIG_SYS_FSL_ERRATUM_I2C_A004447 + unsigned int svr = get_svr(); + if ((SVR_SOC_VER(svr) == SVR_8548 && IS_SVR_REV(svr, 3, 1)) || + (SVR_REV(svr) <= CONFIG_SYS_FSL_A004447_SVR_REV)) + flags = I2C_CR_BIT6; +#endif + + writeb(I2C_CR_MEN | I2C_CR_MSTA, &dev->cr); + + timeval = get_ticks(); + while (!(readb(&dev->sr) & I2C_SR_MBB)) { + if ((get_ticks() - timeval) > timeout) + goto err; + } + + if (readb(&dev->sr) & I2C_SR_MAL) { + /* SDA is stuck low */ + writeb(0, &dev->cr); + udelay(100); + writeb(I2C_CR_MSTA | flags, &dev->cr); + writeb(I2C_CR_MEN | I2C_CR_MSTA | flags, &dev->cr); + } + + readb(&dev->dr); + + timeval = get_ticks(); + while (!(readb(&dev->sr) & I2C_SR_MIF)) { + if ((get_ticks() - timeval) > timeout) + goto err; + } + ret = 0; + +err: + writeb(I2C_CR_MEN | flags, &dev->cr); + writeb(0, &dev->sr); + udelay(100); + + return ret; +} + static void fsl_i2c_init(struct i2c_adapter *adap, int speed, int slaveadd) { const struct fsl_i2c *dev; + const unsigned long long timeout = usec2ticks(CONFIG_I2C_MBB_TIMEOUT); + unsigned long long timeval; #ifdef CONFIG_SYS_I2C_INIT_BOARD /* Call board specific i2c bus reset routine before accessing the @@ -226,6 +275,18 @@ static void fsl_i2c_init(struct i2c_adapter *adap, int speed, int slaveadd) writeb(0x0, &dev->sr); /* clear status register */ writeb(I2C_CR_MEN, &dev->cr); /* start I2C controller */ + timeval = get_ticks(); + while (readb(&dev->sr) & I2C_SR_MBB) { + if ((get_ticks() - timeval) < timeout) + continue; + + if (fsl_i2c_fixup(dev)) + debug("i2c_init: BUS#%d failed to init\n", + adap->hwadapnr); + + break; + } + #ifdef CONFIG_SYS_I2C_BOARD_LATE_INIT /* Call board specific i2c bus reset routine AFTER the bus has been * initialized. Use either this callpoint or i2c_init_board; @@ -394,8 +455,10 @@ fsl_i2c_write(struct i2c_adapter *adap, u8 dev, uint addr, int alen, int i = -1; /* signal error */ u8 *a = (u8*)&addr; - if (i2c_wait4bus(adap) >= 0 && - i2c_write_addr(adap, dev, I2C_WRITE_BIT, 0) != 0 && + if (i2c_wait4bus(adap) < 0) + return -1; + + if (i2c_write_addr(adap, dev, I2C_WRITE_BIT, 0) != 0 && __i2c_write(adap, &a[4 - alen], alen) == alen) { i = __i2c_write(adap, data, length); } diff --git a/drivers/i2c/soft_i2c.c b/drivers/i2c/soft_i2c.c index a2baec0..396fea8 100644 --- a/drivers/i2c/soft_i2c.c +++ b/drivers/i2c/soft_i2c.c @@ -105,11 +105,11 @@ DECLARE_GLOBAL_DATA_PTR; # endif #endif -#if !defined(CONFIG_SYS_SOFT_I2C_SPEED) -#define CONFIG_SYS_SOFT_I2C_SPEED CONFIG_SYS_I2C_SPEED +#if !defined(CONFIG_SYS_I2C_SOFT_SPEED) +#define CONFIG_SYS_I2C_SOFT_SPEED CONFIG_SYS_I2C_SPEED #endif -#if !defined(CONFIG_SYS_SOFT_I2C_SLAVE) -#define CONFIG_SYS_SOFT_I2C_SLAVE CONFIG_SYS_I2C_SLAVE +#if !defined(CONFIG_SYS_I2C_SOFT_SLAVE) +#define CONFIG_SYS_I2C_SOFT_SLAVE CONFIG_SYS_I2C_SLAVE #endif /*----------------------------------------------------------------------- diff --git a/drivers/i2c/tegra_i2c.c b/drivers/i2c/tegra_i2c.c index 9ac3969..9847cf1 100644 --- a/drivers/i2c/tegra_i2c.c +++ b/drivers/i2c/tegra_i2c.c @@ -453,6 +453,10 @@ void i2c_init_board(void) static void tegra_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr) { + /* No i2c support prior to relocation */ + if (!(gd->flags & GD_FLG_RELOC)) + return; + /* This will override the speed selected in the fdt for that port */ debug("i2c_init(speed=%u, slaveaddr=0x%x)\n", speed, slaveaddr); i2c_set_bus_speed(speed); diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index 49e5cb9..bedf833 100644 --- a/drivers/mmc/Makefile +++ b/drivers/mmc/Makefile @@ -32,6 +32,9 @@ COBJS-$(CONFIG_TEGRA_MMC) += tegra_mmc.o COBJS-$(CONFIG_DWMMC) += dw_mmc.o COBJS-$(CONFIG_EXYNOS_DWMMC) += exynos_dw_mmc.o COBJS-$(CONFIG_ZYNQ_SDHCI) += zynq_sdhci.o +ifdef CONFIG_SPL_BUILD +COBJS-$(CONFIG_SPL_MMC_BOOT) += fsl_esdhc_spl.o +endif COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/mmc/fsl_esdhc_spl.c b/drivers/mmc/fsl_esdhc_spl.c new file mode 100644 index 0000000..65c52a2 --- /dev/null +++ b/drivers/mmc/fsl_esdhc_spl.c @@ -0,0 +1,115 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <mmc.h> +#include <malloc.h> + +/* + * The environment variables are written to just after the u-boot image + * on SDCard, so we must read the MBR to get the start address and code + * length of the u-boot image, then calculate the address of the env. + */ +#define ESDHC_BOOT_IMAGE_SIZE 0x48 +#define ESDHC_BOOT_IMAGE_ADDR 0x50 +#define MBRDBR_BOOT_SIG_55 0x1fe +#define MBRDBR_BOOT_SIG_AA 0x1ff +#define CONFIG_CFG_DATA_SECTOR 0 + +/* + * The main entry for mmc booting. It's necessary that SDRAM is already + * configured and available since this code loads the main U-Boot image + * from mmc into SDRAM and starts it from there. + */ + +void __noreturn mmc_boot(void) +{ + __attribute__((noreturn)) void (*uboot)(void); + uint blk_start, blk_cnt, err; + u32 blklen; + uchar *tmp_buf; + uchar val; + uint i, byte_num; + u32 offset, code_len; + struct mmc *mmc; + + mmc = find_mmc_device(0); + if (!mmc) { + puts("spl: mmc device not found!!\n"); + hang(); + } + + blklen = mmc->read_bl_len; + tmp_buf = malloc(blklen); + if (!tmp_buf) { + puts("spl: malloc memory failed!!\n"); + hang(); + } + memset(tmp_buf, 0, blklen); + + /* + * Read source addr from sd card + */ + err = mmc->block_dev.block_read(0, CONFIG_CFG_DATA_SECTOR, 1, tmp_buf); + if (err != 1) { + puts("spl: mmc read failed!!\n"); + free(tmp_buf); + hang(); + } + + val = *(tmp_buf + MBRDBR_BOOT_SIG_55); + if (0x55 != val) { + puts("spl: mmc signature is not valid!!\n"); + free(tmp_buf); + hang(); + } + val = *(tmp_buf + MBRDBR_BOOT_SIG_AA); + if (0xAA != val) { + puts("spl: mmc signature is not valid!!\n"); + free(tmp_buf); + hang(); + } + + byte_num = 4; + offset = 0; + for (i = 0; i < byte_num; i++) { + val = *(tmp_buf + ESDHC_BOOT_IMAGE_ADDR + i); + offset = (offset << 8) + val; + } + offset += CONFIG_SYS_MMC_U_BOOT_OFFS; + /* Get the code size from offset 0x48 */ + byte_num = 4; + code_len = 0; + for (i = 0; i < byte_num; i++) { + val = *(tmp_buf + ESDHC_BOOT_IMAGE_SIZE + i); + code_len = (code_len << 8) + val; + } + code_len -= CONFIG_SYS_MMC_U_BOOT_OFFS; + /* + * Load U-Boot image from mmc into RAM + */ + blk_start = ALIGN(offset, mmc->read_bl_len) / mmc->read_bl_len; + blk_cnt = ALIGN(code_len, mmc->read_bl_len) / mmc->read_bl_len; + err = mmc->block_dev.block_read(0, blk_start, blk_cnt, + (uchar *)CONFIG_SYS_MMC_U_BOOT_DST); + if (err != blk_cnt) { + puts("spl: mmc read failed!!\n"); + free(tmp_buf); + hang(); + } + + /* + * Clean d-cache and invalidate i-cache, to + * make sure that no stale data is executed. + */ + flush_cache(CONFIG_SYS_MMC_U_BOOT_DST, CONFIG_SYS_MMC_U_BOOT_SIZE); + + /* + * Jump to U-Boot image + */ + uboot = (void *)CONFIG_SYS_MMC_U_BOOT_START; + (*uboot)(); +} diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 4da8db9..5502675 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -1483,7 +1483,9 @@ int mmc_initialize(bd_t *bis) if (board_mmc_init(bis) < 0) cpu_mmc_init(bis); +#ifndef CONFIG_SPL_BUILD print_mmc_devices(','); +#endif do_preinit(); return 0; diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index a37663e..a389cd1 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -1803,7 +1803,7 @@ static int flash_detect_legacy(phys_addr_t base, int banknum) break; else unmap_physmem((void *)info->start[0], - MAP_NOCACHE); + info->portwidth); } } diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index e27e0b7..366dee6 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -23,6 +23,7 @@ COBJS-$(CONFIG_SPL_NAND_SIMPLE) += nand_spl_simple.o COBJS-$(CONFIG_SPL_NAND_LOAD) += nand_spl_load.o COBJS-$(CONFIG_SPL_NAND_ECC) += nand_ecc.o COBJS-$(CONFIG_SPL_NAND_BASE) += nand_base.o +COBJS-$(CONFIG_SPL_NAND_INIT) += nand.o else # not spl diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index f844990..96aca00 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -16,6 +16,7 @@ #include <asm/arch/gpio.h> #include <asm/arch/at91_pio.h> +#include <malloc.h> #include <nand.h> #include <watchdog.h> @@ -50,13 +51,13 @@ struct atmel_nand_host { void __iomem *pmecc_index_of; /* data for pmecc computation */ - int16_t pmecc_smu[(CONFIG_PMECC_CAP + 2) * (2 * CONFIG_PMECC_CAP + 1)]; - int16_t pmecc_partial_syn[2 * CONFIG_PMECC_CAP + 1]; - int16_t pmecc_si[2 * CONFIG_PMECC_CAP + 1]; - int16_t pmecc_lmu[CONFIG_PMECC_CAP + 1]; /* polynomal order */ - int pmecc_mu[CONFIG_PMECC_CAP + 1]; - int pmecc_dmu[CONFIG_PMECC_CAP + 1]; - int pmecc_delta[CONFIG_PMECC_CAP + 1]; + int16_t *pmecc_smu; + int16_t *pmecc_partial_syn; + int16_t *pmecc_si; + int16_t *pmecc_lmu; /* polynomal order */ + int *pmecc_mu; + int *pmecc_dmu; + int *pmecc_delta; }; static struct atmel_nand_host pmecc_host; @@ -109,6 +110,48 @@ static void __iomem *pmecc_get_alpha_to(struct atmel_nand_host *host) table_size * sizeof(int16_t); } +static void pmecc_data_free(struct atmel_nand_host *host) +{ + free(host->pmecc_partial_syn); + free(host->pmecc_si); + free(host->pmecc_lmu); + free(host->pmecc_smu); + free(host->pmecc_mu); + free(host->pmecc_dmu); + free(host->pmecc_delta); +} + +static int pmecc_data_alloc(struct atmel_nand_host *host) +{ + const int cap = host->pmecc_corr_cap; + int size; + + size = (2 * cap + 1) * sizeof(int16_t); + host->pmecc_partial_syn = malloc(size); + host->pmecc_si = malloc(size); + host->pmecc_lmu = malloc((cap + 1) * sizeof(int16_t)); + host->pmecc_smu = malloc((cap + 2) * size); + + size = (cap + 1) * sizeof(int); + host->pmecc_mu = malloc(size); + host->pmecc_dmu = malloc(size); + host->pmecc_delta = malloc(size); + + if (host->pmecc_partial_syn && + host->pmecc_si && + host->pmecc_lmu && + host->pmecc_smu && + host->pmecc_mu && + host->pmecc_dmu && + host->pmecc_delta) + return 0; + + /* error happened */ + pmecc_data_free(host); + return -ENOMEM; + +} + static void pmecc_gen_syndrome(struct mtd_info *mtd, int sector) { struct nand_chip *nand_chip = mtd->priv; @@ -622,6 +665,99 @@ static void atmel_pmecc_core_init(struct mtd_info *mtd) pmecc_writel(host->pmecc, ctrl, PMECC_CTRL_ENABLE); } +#ifdef CONFIG_SYS_NAND_ONFI_DETECTION +/* + * get_onfi_ecc_param - Get ECC requirement from ONFI parameters + * @ecc_bits: store the ONFI ECC correct bits capbility + * @sector_size: in how many bytes that ONFI require to correct @ecc_bits + * + * Returns -1 if ONFI parameters is not supported. In this case @ecc_bits, + * @sector_size are initialize to 0. + * Return 0 if success to get the ECC requirement. + */ +static int get_onfi_ecc_param(struct nand_chip *chip, + int *ecc_bits, int *sector_size) +{ + *ecc_bits = *sector_size = 0; + + if (chip->onfi_params.ecc_bits == 0xff) + /* TODO: the sector_size and ecc_bits need to be find in + * extended ecc parameter, currently we don't support it. + */ + return -1; + + *ecc_bits = chip->onfi_params.ecc_bits; + + /* The default sector size (ecc codeword size) is 512 */ + *sector_size = 512; + + return 0; +} + +/* + * pmecc_choose_ecc - Get ecc requirement from ONFI parameters. If + * pmecc_corr_cap or pmecc_sector_size is 0, then set it as + * ONFI ECC parameters. + * @host: point to an atmel_nand_host structure. + * if host->pmecc_corr_cap is 0 then set it as the ONFI ecc_bits. + * if host->pmecc_sector_size is 0 then set it as the ONFI sector_size. + * @chip: point to an nand_chip structure. + * @cap: store the ONFI ECC correct bits capbility + * @sector_size: in how many bytes that ONFI require to correct @ecc_bits + * + * Return 0 if success. otherwise return the error code. + */ +static int pmecc_choose_ecc(struct atmel_nand_host *host, + struct nand_chip *chip, + int *cap, int *sector_size) +{ + /* Get ECC requirement from ONFI parameters */ + *cap = *sector_size = 0; + if (chip->onfi_version) { + if (!get_onfi_ecc_param(chip, cap, sector_size)) { + MTDDEBUG(MTD_DEBUG_LEVEL1, "ONFI params, minimum required ECC: %d bits in %d bytes\n", + *cap, *sector_size); + } else { + dev_info(host->dev, "NAND chip ECC reqirement is in Extended ONFI parameter, we don't support yet.\n"); + } + } else { + dev_info(host->dev, "NAND chip is not ONFI compliant, assume ecc_bits is 2 in 512 bytes"); + } + if (*cap == 0 && *sector_size == 0) { + /* Non-ONFI compliant or use extended ONFI parameters */ + *cap = 2; + *sector_size = 512; + } + + /* If head file doesn't specify then use the one in ONFI parameters */ + if (host->pmecc_corr_cap == 0) { + /* use the most fitable ecc bits (the near bigger one ) */ + if (*cap <= 2) + host->pmecc_corr_cap = 2; + else if (*cap <= 4) + host->pmecc_corr_cap = 4; + else if (*cap <= 8) + host->pmecc_corr_cap = 8; + else if (*cap <= 12) + host->pmecc_corr_cap = 12; + else if (*cap <= 24) + host->pmecc_corr_cap = 24; + else + return -EINVAL; + } + if (host->pmecc_sector_size == 0) { + /* use the most fitable sector size (the near smaller one ) */ + if (*sector_size >= 1024) + host->pmecc_sector_size = 1024; + else if (*sector_size >= 512) + host->pmecc_sector_size = 512; + else + return -EINVAL; + } + return 0; +} +#endif + static int atmel_pmecc_nand_init_params(struct nand_chip *nand, struct mtd_info *mtd) { @@ -635,9 +771,45 @@ static int atmel_pmecc_nand_init_params(struct nand_chip *nand, nand->ecc.correct = NULL; nand->ecc.hwctl = NULL; - cap = host->pmecc_corr_cap = CONFIG_PMECC_CAP; - sector_size = host->pmecc_sector_size = CONFIG_PMECC_SECTOR_SIZE; - host->pmecc_index_table_offset = CONFIG_PMECC_INDEX_TABLE_OFFSET; +#ifdef CONFIG_SYS_NAND_ONFI_DETECTION + host->pmecc_corr_cap = host->pmecc_sector_size = 0; + +#ifdef CONFIG_PMECC_CAP + host->pmecc_corr_cap = CONFIG_PMECC_CAP; +#endif +#ifdef CONFIG_PMECC_SECTOR_SIZE + host->pmecc_sector_size = CONFIG_PMECC_SECTOR_SIZE; +#endif + /* Get ECC requirement of ONFI parameters. And if CONFIG_PMECC_CAP or + * CONFIG_PMECC_SECTOR_SIZE not defined, then use ecc_bits, sector_size + * from ONFI. + */ + if (pmecc_choose_ecc(host, nand, &cap, §or_size)) { + dev_err(host->dev, "The NAND flash's ECC requirement(ecc_bits: %d, sector_size: %d) are not support!", + cap, sector_size); + return -EINVAL; + } + + if (cap > host->pmecc_corr_cap) + dev_info(host->dev, "WARNING: Using different ecc correct bits(%d bit) from Nand ONFI ECC reqirement (%d bit).\n", + host->pmecc_corr_cap, cap); + if (sector_size < host->pmecc_sector_size) + dev_info(host->dev, "WARNING: Using different ecc correct sector size (%d bytes) from Nand ONFI ECC reqirement (%d bytes).\n", + host->pmecc_sector_size, sector_size); +#else /* CONFIG_SYS_NAND_ONFI_DETECTION */ + host->pmecc_corr_cap = CONFIG_PMECC_CAP; + host->pmecc_sector_size = CONFIG_PMECC_SECTOR_SIZE; +#endif + + cap = host->pmecc_corr_cap; + sector_size = host->pmecc_sector_size; + + /* TODO: need check whether cap & sector_size is validate */ + + if (host->pmecc_sector_size == 512) + host->pmecc_index_table_offset = ATMEL_PMECC_INDEX_OFFSET_512; + else + host->pmecc_index_table_offset = ATMEL_PMECC_INDEX_OFFSET_1024; MTDDEBUG(MTD_DEBUG_LEVEL1, "Initialize PMECC params, cap: %d, sector: %d\n", @@ -691,6 +863,12 @@ static int atmel_pmecc_nand_init_params(struct nand_chip *nand, return 0; } + /* Allocate data for PMECC computation */ + if (pmecc_data_alloc(host)) { + dev_err(host->dev, "Cannot allocate memory for PMECC computation!\n"); + return -ENOMEM; + } + nand->ecc.read_page = atmel_nand_pmecc_read_page; nand->ecc.write_page = atmel_nand_pmecc_write_page; nand->ecc.strength = cap; diff --git a/drivers/mtd/nand/fsl_elbc_spl.c b/drivers/mtd/nand/fsl_elbc_spl.c index 7e5599a..a7476b4 100644 --- a/drivers/mtd/nand/fsl_elbc_spl.c +++ b/drivers/mtd/nand/fsl_elbc_spl.c @@ -34,7 +34,11 @@ static void nand_wait(void) } } +#ifdef CONFIG_TPL_BUILD +int nand_spl_load_image(uint32_t offs, unsigned int uboot_size, void *vdst) +#else static int nand_load_image(uint32_t offs, unsigned int uboot_size, void *vdst) +#endif { fsl_lbc_t *regs = LBC_BASE_ADDR; uchar *buf = (uchar *)CONFIG_SYS_NAND_BASE; @@ -114,6 +118,15 @@ static int nand_load_image(uint32_t offs, unsigned int uboot_size, void *vdst) } /* + * Defines a static function nand_load_image() here, because non-static makes + * the code too large for certain SPLs(minimal SPL, maximum size <= 4Kbytes) + */ +#ifndef CONFIG_TPL_BUILD +#define nand_spl_load_image(offs, uboot_size, vdst) \ + nand_load_image(offs, uboot_size, vdst) +#endif + +/* * The main entry for NAND booting. It's necessary that SDRAM is already * configured and available since this code loads the main U-Boot image * from NAND into SDRAM and starts it from there. @@ -124,17 +137,17 @@ void nand_boot(void) /* * Load U-Boot image from NAND into RAM */ - nand_load_image(CONFIG_SYS_NAND_U_BOOT_OFFS, - CONFIG_SYS_NAND_U_BOOT_SIZE, - (void *)CONFIG_SYS_NAND_U_BOOT_DST); + nand_spl_load_image(CONFIG_SYS_NAND_U_BOOT_OFFS, + CONFIG_SYS_NAND_U_BOOT_SIZE, + (void *)CONFIG_SYS_NAND_U_BOOT_DST); #ifdef CONFIG_NAND_ENV_DST - nand_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, - (void *)CONFIG_NAND_ENV_DST); + nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, + (void *)CONFIG_NAND_ENV_DST); #ifdef CONFIG_ENV_OFFSET_REDUND - nand_load_image(CONFIG_ENV_OFFSET_REDUND, CONFIG_ENV_SIZE, - (void *)CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE); + nand_spl_load_image(CONFIG_ENV_OFFSET_REDUND, CONFIG_ENV_SIZE, + (void *)CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE); #endif #endif diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c index 1e0210a..d149a6d 100644 --- a/drivers/mtd/nand/nand_util.c +++ b/drivers/mtd/nand/nand_util.c @@ -51,7 +51,6 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts) struct jffs2_unknown_node cleanmarker; erase_info_t erase; unsigned long erase_length, erased_length; /* in blocks */ - int bbtest = 1; int result; int percent_complete = -1; const char *mtd_device = meminfo->name; @@ -102,7 +101,7 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts) puts("Size of erase exceeds limit\n"); return -EFBIG; } - if (!opts->scrub && bbtest) { + if (!opts->scrub) { int ret = mtd_block_isbad(meminfo, erase.addr); if (ret > 0) { if (!opts->quiet) diff --git a/drivers/mtd/spi/Makefile b/drivers/mtd/spi/Makefile index e537fcf..191138a 100644 --- a/drivers/mtd/spi/Makefile +++ b/drivers/mtd/spi/Makefile @@ -11,6 +11,7 @@ LIB := $(obj)libspi_flash.o ifdef CONFIG_SPL_BUILD COBJS-$(CONFIG_SPL_SPI_LOAD) += spi_spl_load.o +COBJS-$(CONFIG_SPL_SPI_BOOT) += fsl_espi_spl.o endif COBJS-$(CONFIG_SPI_FLASH) += spi_flash.o diff --git a/drivers/mtd/spi/atmel.c b/drivers/mtd/spi/atmel.c index 6a92c4b..f34df43 100644 --- a/drivers/mtd/spi/atmel.c +++ b/drivers/mtd/spi/atmel.c @@ -252,7 +252,7 @@ static int dataflash_write_p2(struct spi_flash *flash, } debug("SF: AT45: Successfully programmed %zu bytes @ 0x%x\n", - len, offset); + len, offset); ret = 0; out: @@ -325,7 +325,7 @@ static int dataflash_write_at45(struct spi_flash *flash, } debug("SF: AT45: Successfully programmed %zu bytes @ 0x%x\n", - len, offset); + len, offset); ret = 0; out: @@ -387,7 +387,7 @@ static int dataflash_erase_p2(struct spi_flash *flash, u32 offset, size_t len) } debug("SF: AT45: Successfully erased %zu bytes @ 0x%x\n", - len, offset); + len, offset); ret = 0; out: @@ -450,7 +450,7 @@ static int dataflash_erase_at45(struct spi_flash *flash, u32 offset, size_t len) } debug("SF: AT45: Successfully erased %zu bytes @ 0x%x\n", - len, offset); + len, offset); ret = 0; out: @@ -476,7 +476,7 @@ struct spi_flash *spi_flash_probe_atmel(struct spi_slave *spi, u8 *idcode) if (i == ARRAY_SIZE(atmel_spi_flash_table)) { debug("SF: Unsupported DataFlash ID %02x\n", - idcode[1]); + idcode[1]); return NULL; } diff --git a/drivers/mtd/spi/eon.c b/drivers/mtd/spi/eon.c index b16e7ab..25cfc12 100644 --- a/drivers/mtd/spi/eon.c +++ b/drivers/mtd/spi/eon.c @@ -54,8 +54,7 @@ struct spi_flash *spi_flash_probe_eon(struct spi_slave *spi, u8 *idcode) flash->page_size = 256; flash->sector_size = 256 * 16 * 16; - flash->size = 256 * 16 - * params->nr_sectors; + flash->size = 256 * 16 * params->nr_sectors; return flash; } diff --git a/drivers/mtd/spi/fsl_espi_spl.c b/drivers/mtd/spi/fsl_espi_spl.c new file mode 100644 index 0000000..6263d8c --- /dev/null +++ b/drivers/mtd/spi/fsl_espi_spl.c @@ -0,0 +1,62 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <spi_flash.h> +#include <malloc.h> + +#define ESPI_BOOT_IMAGE_SIZE 0x48 +#define ESPI_BOOT_IMAGE_ADDR 0x50 +#define CONFIG_CFG_DATA_SECTOR 0 + +/* + * The main entry for SPI booting. It's necessary that SDRAM is already + * configured and available since this code loads the main U-Boot image + * from SPI into SDRAM and starts it from there. + */ +void spi_boot(void) +{ + void (*uboot)(void) __noreturn; + u32 offset, code_len; + unsigned char *buf = NULL; + struct spi_flash *flash; + + flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS, + CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE); + if (flash == NULL) { + puts("\nspi_flash_probe failed"); + hang(); + } + + /* + * Load U-Boot image from SPI flash into RAM + */ + buf = malloc(flash->page_size); + if (buf == NULL) { + puts("\nmalloc failed"); + hang(); + } + memset(buf, 0, flash->page_size); + + spi_flash_read(flash, CONFIG_CFG_DATA_SECTOR, + flash->page_size, (void *)buf); + offset = *(u32 *)(buf + ESPI_BOOT_IMAGE_ADDR); + /* Skip spl code */ + offset += CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS; + /* Get the code size from offset 0x48 */ + code_len = *(u32 *)(buf + ESPI_BOOT_IMAGE_SIZE); + /* Skip spl code */ + code_len = code_len - CONFIG_SPL_MAX_SIZE; + /* copy code to DDR */ + spi_flash_read(flash, offset, code_len, + (void *)CONFIG_SYS_SPI_FLASH_U_BOOT_DST); + /* + * Jump to U-Boot image + */ + flush_cache(CONFIG_SYS_SPI_FLASH_U_BOOT_DST, code_len); + uboot = (void *)CONFIG_SYS_SPI_FLASH_U_BOOT_START; + (*uboot)(); +} diff --git a/drivers/mtd/spi/gigadevice.c b/drivers/mtd/spi/gigadevice.c index 950c777..b42581a 100644 --- a/drivers/mtd/spi/gigadevice.c +++ b/drivers/mtd/spi/gigadevice.c @@ -45,7 +45,7 @@ struct spi_flash *spi_flash_probe_gigadevice(struct spi_slave *spi, u8 *idcode) if (i == ARRAY_SIZE(gigadevice_spi_flash_table)) { debug("SF: Unsupported Gigadevice ID %02x%02x\n", - idcode[1], idcode[2]); + idcode[1], idcode[2]); return NULL; } diff --git a/drivers/mtd/spi/ramtron.c b/drivers/mtd/spi/ramtron.c index f67ddd6..38f9d69 100644 --- a/drivers/mtd/spi/ramtron.c +++ b/drivers/mtd/spi/ramtron.c @@ -230,7 +230,8 @@ struct spi_flash *spi_fram_probe_ramtron(struct spi_slave *spi, u8 *idcode) /* JEDEC conformant RAMTRON id */ for (i = 0; i < ARRAY_SIZE(ramtron_spi_fram_table); i++) { params = &ramtron_spi_fram_table[i]; - if (idcode[1] == params->id1 && idcode[2] == params->id2) + if (idcode[1] == params->id1 && + idcode[2] == params->id2) goto found; } break; @@ -251,7 +252,8 @@ struct spi_flash *spi_fram_probe_ramtron(struct spi_slave *spi, u8 *idcode) /* now find the device */ for (i = 0; i < ARRAY_SIZE(ramtron_spi_fram_table); i++) { params = &ramtron_spi_fram_table[i]; - if (!strcmp(params->name, CONFIG_SPI_FRAM_RAMTRON_NON_JEDEC)) + if (!strcmp(params->name, + CONFIG_SPI_FRAM_RAMTRON_NON_JEDEC)) goto found; } debug("SF: Unsupported non-JEDEC RAMTRON device " @@ -264,7 +266,7 @@ struct spi_flash *spi_fram_probe_ramtron(struct spi_slave *spi, u8 *idcode) /* arriving here means no method has found a device we can handle */ debug("SF/ramtron: unsupported device id0=%02x id1=%02x id2=%02x\n", - idcode[0], idcode[1], idcode[2]); + idcode[0], idcode[1], idcode[2]); return NULL; found: diff --git a/drivers/mtd/spi/spansion.c b/drivers/mtd/spi/spansion.c index 47a4897..fa7ac8c 100644 --- a/drivers/mtd/spi/spansion.c +++ b/drivers/mtd/spi/spansion.c @@ -6,7 +6,7 @@ * TsiChung Liew (Tsi-Chung.Liew@freescale.com), * and Jason McMullan (mcmullan@netapp.com) * - * SPDX-License-Identifier: GPL-2.0+ + * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> @@ -122,7 +122,8 @@ struct spi_flash *spi_flash_probe_spansion(struct spi_slave *spi, u8 *idcode) } if (i == ARRAY_SIZE(spansion_spi_flash_table)) { - debug("SF: Unsupported SPANSION ID %04x %04x\n", jedec, ext_jedec); + debug("SF: Unsupported SPANSION ID %04x %04x\n", + jedec, ext_jedec); return NULL; } diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c index 6a6fe37..5d5055f 100644 --- a/drivers/mtd/spi/spi_flash.c +++ b/drivers/mtd/spi/spi_flash.c @@ -40,12 +40,13 @@ static int spi_flash_read_write(struct spi_slave *spi, ret = spi_xfer(spi, cmd_len * 8, cmd, NULL, flags); if (ret) { debug("SF: Failed to send command (%zu bytes): %d\n", - cmd_len, ret); + cmd_len, ret); } else if (data_len != 0) { - ret = spi_xfer(spi, data_len * 8, data_out, data_in, SPI_XFER_END); + ret = spi_xfer(spi, data_len * 8, data_out, data_in, + SPI_XFER_END); if (ret) debug("SF: Failed to transfer %zu bytes of data: %d\n", - data_len, ret); + data_len, ret); } return ret; @@ -86,7 +87,7 @@ int spi_flash_cmd_wait_ready(struct spi_flash *flash, unsigned long timeout) ret = spi_xfer(spi, 8, &cmd, NULL, SPI_XFER_BEGIN); if (ret) { debug("SF: fail to read %s status register\n", - cmd == CMD_READ_STATUS ? "read" : "flag"); + cmd == CMD_READ_STATUS ? "read" : "flag"); return ret; } @@ -144,7 +145,7 @@ int spi_flash_write_common(struct spi_flash *flash, const u8 *cmd, ret = spi_flash_cmd_wait_ready(flash, timeout); if (ret < 0) { debug("SF: write %s timed out\n", - timeout == SPI_FLASH_PROG_TIMEOUT ? + timeout == SPI_FLASH_PROG_TIMEOUT ? "program" : "page erase"); return ret; } @@ -554,12 +555,14 @@ struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs, goto err_manufacturer_probe; } #endif +#ifndef CONFIG_SPL_BUILD printf("SF: Detected %s with page size ", flash->name); print_size(flash->sector_size, ", total "); print_size(flash->size, ""); if (flash->memory_map) printf(", mapped at %p", flash->memory_map); puts("\n"); +#endif #ifndef CONFIG_SPI_FLASH_BAR if (flash->size > SPI_FLASH_16MB_BOUN) { puts("SF: Warning - Only lower 16MiB accessible,"); diff --git a/drivers/mtd/spi/spi_spl_load.c b/drivers/mtd/spi/spi_spl_load.c index 7c799ca..2935530 100644 --- a/drivers/mtd/spi/spi_spl_load.c +++ b/drivers/mtd/spi/spi_spl_load.c @@ -39,7 +39,7 @@ void spl_spi_load_image(void) /* Load u-boot, mkimage header is 64 bytes. */ spi_flash_read(flash, CONFIG_SYS_SPI_U_BOOT_OFFS, 0x40, - (void *) header); + (void *)header); spl_parse_image_header(header); spi_flash_read(flash, CONFIG_SYS_SPI_U_BOOT_OFFS, spl_image.size, (void *)spl_image.load_addr); diff --git a/drivers/mtd/spi/sst.c b/drivers/mtd/spi/sst.c index 95f5490..256867c 100644 --- a/drivers/mtd/spi/sst.c +++ b/drivers/mtd/spi/sst.c @@ -19,7 +19,7 @@ #include "spi_flash_internal.h" #define CMD_SST_BP 0x02 /* Byte Program */ -#define CMD_SST_AAI_WP 0xAD /* Auto Address Increment Word Program */ +#define CMD_SST_AAI_WP 0xAD /* Auto Address Incr Word Program */ #define SST_SR_WIP (1 << 0) /* Write-in-Progress */ #define SST_SR_WEL (1 << 1) /* Write enable */ @@ -50,47 +50,61 @@ static const struct sst_spi_flash_params sst_spi_flash_table[] = { .flags = SST_FEAT_WP, .nr_sectors = 128, .name = "SST25VF040B", - },{ + }, + { .idcode1 = 0x8e, .flags = SST_FEAT_WP, .nr_sectors = 256, .name = "SST25VF080B", - },{ + }, + { .idcode1 = 0x41, .flags = SST_FEAT_WP, .nr_sectors = 512, .name = "SST25VF016B", - },{ + }, + { .idcode1 = 0x4a, .flags = SST_FEAT_WP, .nr_sectors = 1024, .name = "SST25VF032B", - },{ + }, + { .idcode1 = 0x4b, .flags = SST_FEAT_MBP, .nr_sectors = 2048, .name = "SST25VF064C", - },{ + }, + { .idcode1 = 0x01, .flags = SST_FEAT_WP, .nr_sectors = 16, .name = "SST25WF512", - },{ + }, + { .idcode1 = 0x02, .flags = SST_FEAT_WP, .nr_sectors = 32, .name = "SST25WF010", - },{ + }, + { .idcode1 = 0x03, .flags = SST_FEAT_WP, .nr_sectors = 64, .name = "SST25WF020", - },{ + }, + { .idcode1 = 0x04, .flags = SST_FEAT_WP, .nr_sectors = 128, .name = "SST25WF040", }, + { + .idcode1 = 0x05, + .flags = SST_FEAT_WP, + .nr_sectors = 256, + .name = "SST25WF080", + }, }; static int @@ -105,7 +119,7 @@ sst_byte_write(struct spi_flash *flash, u32 offset, const void *buf) }; debug("BP[%02x]: 0x%p => cmd = { 0x%02x 0x%06x }\n", - spi_w8r8(flash->spi, CMD_READ_STATUS), buf, cmd[0], offset); + spi_w8r8(flash->spi, CMD_READ_STATUS), buf, cmd[0], offset); ret = spi_flash_cmd_write_enable(flash); if (ret) @@ -152,11 +166,11 @@ sst_write_wp(struct spi_flash *flash, u32 offset, size_t len, const void *buf) for (; actual < len - 1; actual += 2) { debug("WP[%02x]: 0x%p => cmd = { 0x%02x 0x%06x }\n", - spi_w8r8(flash->spi, CMD_READ_STATUS), buf + actual, cmd[0], - offset); + spi_w8r8(flash->spi, CMD_READ_STATUS), buf + actual, + cmd[0], offset); ret = spi_flash_cmd_write(flash->spi, cmd, cmd_len, - buf + actual, 2); + buf + actual, 2); if (ret) { debug("SF: sst word program failed\n"); break; diff --git a/drivers/mtd/spi/stmicro.c b/drivers/mtd/spi/stmicro.c index 0ca00f1..c5fa64e 100644 --- a/drivers/mtd/spi/stmicro.c +++ b/drivers/mtd/spi/stmicro.c @@ -8,7 +8,7 @@ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. * TsiChung Liew (Tsi-Chung.Liew@freescale.com) * - * SPDX-License-Identifier: GPL-2.0+ + * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> @@ -18,7 +18,7 @@ #include "spi_flash_internal.h" /* M25Pxx-specific commands */ -#define CMD_M25PXX_RES 0xab /* Release from DP, and Read Signature */ +#define CMD_M25PXX_RES 0xab /* Release from DP, and Read Signature */ struct stmicro_spi_flash_params { u16 id; @@ -150,7 +150,7 @@ static const struct stmicro_spi_flash_params stmicro_spi_flash_table[] = { }, }; -struct spi_flash *spi_flash_probe_stmicro(struct spi_slave *spi, u8 * idcode) +struct spi_flash *spi_flash_probe_stmicro(struct spi_slave *spi, u8 *idcode) { const struct stmicro_spi_flash_params *params; struct spi_flash *flash; @@ -166,17 +166,17 @@ struct spi_flash *spi_flash_probe_stmicro(struct spi_slave *spi, u8 * idcode) idcode[0] = 0x20; idcode[1] = 0x20; idcode[2] = idcode[3] + 1; - } else + } else { return NULL; + } } id = ((idcode[1] << 8) | idcode[2]); for (i = 0; i < ARRAY_SIZE(stmicro_spi_flash_table); i++) { params = &stmicro_spi_flash_table[i]; - if (params->id == id) { + if (params->id == id) break; - } } if (i == ARRAY_SIZE(stmicro_spi_flash_table)) { diff --git a/drivers/mtd/spi/winbond.c b/drivers/mtd/spi/winbond.c index c399bf1..b31911a 100644 --- a/drivers/mtd/spi/winbond.c +++ b/drivers/mtd/spi/winbond.c @@ -123,7 +123,7 @@ struct spi_flash *spi_flash_probe_winbond(struct spi_slave *spi, u8 *idcode) if (i == ARRAY_SIZE(winbond_spi_flash_table)) { debug("SF: Unsupported Winbond ID %02x%02x\n", - idcode[1], idcode[2]); + idcode[1], idcode[2]); return NULL; } diff --git a/drivers/net/4xx_enet.c b/drivers/net/4xx_enet.c index 7c6e362..c98867d 100644 --- a/drivers/net/4xx_enet.c +++ b/drivers/net/4xx_enet.c @@ -1,25 +1,6 @@ -/*-----------------------------------------------------------------------------+ - * This source code is dual-licensed. You may use it under the terms of the - * GNU General Public License version 2, or under the license below. - * - * This source code has been made available to you by IBM on an AS-IS - * basis. Anyone receiving this source is licensed under IBM - * copyrights to use it in any way he or she deems fit, including - * copying it, modifying it, compiling it, and redistributing it either - * with or without modifications. No license under IBM patents or - * patent applications is to be implied by the copyright license. - * - * Any user of this software should understand that IBM cannot provide - * technical support for this software and will not be responsible for - * any consequences resulting from the use of this software. - * - * Any person who transfers this source code or any derivative work - * must include the IBM copyright notice, this paragraph, and the - * preceding two paragraphs in the transferred software. - * - * COPYRIGHT I B M CORPORATION 1995 - * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M - *-----------------------------------------------------------------------------*/ +/* + * SPDX-License-Identifier: GPL-2.0 ibm-pibs + */ /*-----------------------------------------------------------------------------+ * * File Name: enetemac.c diff --git a/drivers/net/ax88180.c b/drivers/net/ax88180.c index f501768..7f0cfe5 100644 --- a/drivers/net/ax88180.c +++ b/drivers/net/ax88180.c @@ -157,7 +157,7 @@ static void ax88180_mac_reset (struct eth_device *dev) OUTW (dev, MISC_RESET_MAC, MISC); tmpval = INW (dev, MISC); - for (i = 0; i < (sizeof (program_seq) / sizeof (program_seq[0])); i++) + for (i = 0; i < ARRAY_SIZE(program_seq); i++) OUTW (dev, program_seq[i].value, program_seq[i].offset); } diff --git a/drivers/net/fm/eth.c b/drivers/net/fm/eth.c index 422c2c6..cb099cd 100644 --- a/drivers/net/fm/eth.c +++ b/drivers/net/fm/eth.c @@ -341,7 +341,9 @@ static int fm_eth_startup(struct fm_eth *fm_eth) mac->init_mac(mac); /* For some reason we need to set SPEED_100 */ - if ((fm_eth->enet_if == PHY_INTERFACE_MODE_SGMII) && mac->set_if_mode) + if (((fm_eth->enet_if == PHY_INTERFACE_MODE_SGMII) || + (fm_eth->enet_if == PHY_INTERFACE_MODE_QSGMII)) && + mac->set_if_mode) mac->set_if_mode(mac, fm_eth->enet_if, SPEED_100); /* init bmi rx port, IM mode and disable */ diff --git a/drivers/net/fm/fm.c b/drivers/net/fm/fm.c index 4bc8f35..bca20b3 100644 --- a/drivers/net/fm/fm.c +++ b/drivers/net/fm/fm.c @@ -396,6 +396,8 @@ int fm_init_common(int index, struct ccsr_fman *reg) } #elif defined(CONFIG_SYS_QE_FMAN_FW_IN_REMOTE) void *addr = (void *)CONFIG_SYS_QE_FMAN_FW_ADDR; +#else + void *addr = NULL; #endif /* Upload the Fman microcode if it's present */ diff --git a/drivers/net/fm/memac.c b/drivers/net/fm/memac.c index 144e109..592a67f 100644 --- a/drivers/net/fm/memac.c +++ b/drivers/net/fm/memac.c @@ -90,6 +90,7 @@ static void memac_set_interface_mode(struct fsl_enet_mac *mac, if_mode |= (IF_MODE_GMII | IF_MODE_RM); break; case PHY_INTERFACE_MODE_SGMII: + case PHY_INTERFACE_MODE_QSGMII: if_mode &= ~IF_MODE_MASK; if_mode |= (IF_MODE_GMII); break; diff --git a/drivers/net/fm/t4240.c b/drivers/net/fm/t4240.c index 10c141f..6253f22 100644 --- a/drivers/net/fm/t4240.c +++ b/drivers/net/fm/t4240.c @@ -114,7 +114,45 @@ phy_interface_t fman_port_enet_if(enum fm_port port) return PHY_INTERFACE_MODE_SGMII; break; default: - return PHY_INTERFACE_MODE_NONE; + break; + } + + /* handle QSGMII */ + switch (port) { + case FM1_DTSEC1: + case FM1_DTSEC2: + case FM1_DTSEC3: + case FM1_DTSEC4: + /* check lane G on SerDes1 */ + if (is_serdes_configured(QSGMII_FM1_A)) + return PHY_INTERFACE_MODE_QSGMII; + break; + case FM1_DTSEC5: + case FM1_DTSEC6: + case FM1_DTSEC9: + case FM1_DTSEC10: + /* check lane C on SerDes1 */ + if (is_serdes_configured(QSGMII_FM1_B)) + return PHY_INTERFACE_MODE_QSGMII; + break; + case FM2_DTSEC1: + case FM2_DTSEC2: + case FM2_DTSEC3: + case FM2_DTSEC4: + /* check lane G on SerDes2 */ + if (is_serdes_configured(QSGMII_FM2_A)) + return PHY_INTERFACE_MODE_QSGMII; + break; + case FM2_DTSEC5: + case FM2_DTSEC6: + case FM2_DTSEC9: + case FM2_DTSEC10: + /* check lane C on SerDes2 */ + if (is_serdes_configured(QSGMII_FM2_B)) + return PHY_INTERFACE_MODE_QSGMII; + break; + default: + break; } return PHY_INTERFACE_MODE_NONE; diff --git a/drivers/net/fsl_mcdmafec.c b/drivers/net/fsl_mcdmafec.c index 1ad952d..6391f9b 100644 --- a/drivers/net/fsl_mcdmafec.c +++ b/drivers/net/fsl_mcdmafec.c @@ -504,7 +504,7 @@ int mcdmafec_initialize(bd_t * bis) u32 tmp = CONFIG_SYS_INTSRAM + 0x2000; #endif - for (i = 0; i < sizeof(fec_info) / sizeof(fec_info[0]); i++) { + for (i = 0; i < ARRAY_SIZE(fec_info); i++) { dev = (struct eth_device *)memalign(CONFIG_SYS_CACHELINE_SIZE, diff --git a/drivers/net/ftmac110.c b/drivers/net/ftmac110.c index e911dd3..8eee272 100644 --- a/drivers/net/ftmac110.c +++ b/drivers/net/ftmac110.c @@ -1,7 +1,7 @@ /* * Faraday 10/100Mbps Ethernet Controller * - * (C) Copyright 2010 Faraday Technology + * (C) Copyright 2013 Faraday Technology * Dante Su <dantesu@faraday-tech.com> * * SPDX-License-Identifier: GPL-2.0+ @@ -54,11 +54,11 @@ struct ftmac110_chip { uint32_t lnkup; uint32_t phy_addr; - struct ftmac110_rxd *rxd; + struct ftmac110_desc *rxd; ulong rxd_dma; uint32_t rxd_idx; - struct ftmac110_txd *txd; + struct ftmac110_desc *txd; ulong txd_dma; uint32_t txd_idx; }; @@ -69,7 +69,7 @@ static uint16_t mdio_read(struct eth_device *dev, uint8_t phyaddr, uint8_t phyreg) { struct ftmac110_chip *chip = dev->priv; - struct ftmac110_regs __iomem *regs = chip->regs; + struct ftmac110_regs *regs = chip->regs; uint32_t tmp, ts; uint16_t ret = 0xffff; @@ -98,7 +98,7 @@ static void mdio_write(struct eth_device *dev, uint8_t phyaddr, uint8_t phyreg, uint16_t phydata) { struct ftmac110_chip *chip = dev->priv; - struct ftmac110_regs __iomem *regs = chip->regs; + struct ftmac110_regs *regs = chip->regs; uint32_t tmp, ts; tmp = PHYCR_WRITE @@ -195,7 +195,7 @@ static int ftmac110_reset(struct eth_device *dev) uint8_t *a; uint32_t i, maccr; struct ftmac110_chip *chip = dev->priv; - struct ftmac110_regs __iomem *regs = chip->regs; + struct ftmac110_regs *regs = chip->regs; /* 1. MAC reset */ writel(MACCR_RESET, ®s->maccr); @@ -212,14 +212,15 @@ static int ftmac110_reset(struct eth_device *dev) /* 1-1. Init tx ring */ for (i = 0; i < CFG_TXDES_NUM; ++i) { /* owned by SW */ - chip->txd[i].ct[0] = 0; + chip->txd[i].ctrl &= cpu_to_le64(FTMAC110_TXD_CLRMASK); } chip->txd_idx = 0; /* 1-2. Init rx ring */ for (i = 0; i < CFG_RXDES_NUM; ++i) { /* owned by HW */ - chip->rxd[i].ct[0] = cpu_to_le32(FTMAC110_RXCT0_OWNER); + chip->rxd[i].ctrl &= cpu_to_le64(FTMAC110_RXD_CLRMASK); + chip->rxd[i].ctrl |= cpu_to_le64(FTMAC110_RXD_OWNER); } chip->rxd_idx = 0; @@ -268,7 +269,7 @@ static int ftmac110_probe(struct eth_device *dev, bd_t *bis) static void ftmac110_halt(struct eth_device *dev) { struct ftmac110_chip *chip = dev->priv; - struct ftmac110_regs __iomem *regs = chip->regs; + struct ftmac110_regs *regs = chip->regs; writel(0, ®s->imr); writel(0, ®s->maccr); @@ -279,8 +280,9 @@ static void ftmac110_halt(struct eth_device *dev) static int ftmac110_send(struct eth_device *dev, void *pkt, int len) { struct ftmac110_chip *chip = dev->priv; - struct ftmac110_regs __iomem *regs = chip->regs; - struct ftmac110_txd *des; + struct ftmac110_regs *regs = chip->regs; + struct ftmac110_desc *txd; + uint64_t ctrl; if (!chip->lnkup) return 0; @@ -292,24 +294,26 @@ static int ftmac110_send(struct eth_device *dev, void *pkt, int len) len = max(60, len); - des = &chip->txd[chip->txd_idx]; - if (le32_to_cpu(des->ct[0]) & FTMAC110_TXCT0_OWNER) { + txd = &chip->txd[chip->txd_idx]; + ctrl = le64_to_cpu(txd->ctrl); + if (ctrl & FTMAC110_TXD_OWNER) { /* kick-off Tx DMA */ writel(0xffffffff, ®s->txpd); printf("ftmac110: out of txd\n"); return 0; } - memcpy(des->vbuf, (void *)pkt, len); - dma_map_single(des->vbuf, len, DMA_TO_DEVICE); + memcpy(txd->vbuf, (void *)pkt, len); + dma_map_single(txd->vbuf, len, DMA_TO_DEVICE); - /* update len, fts and lts */ - des->ct[1] &= cpu_to_le32(FTMAC110_TXCT1_END); - des->ct[1] |= cpu_to_le32(FTMAC110_TXCT1_LEN(len) - | FTMAC110_TXCT1_FTS | FTMAC110_TXCT1_LTS); - - /* set owner bit and clear others */ - des->ct[0] = cpu_to_le32(FTMAC110_TXCT0_OWNER); + /* clear control bits */ + ctrl &= FTMAC110_TXD_CLRMASK; + /* set len, fts and lts */ + ctrl |= FTMAC110_TXD_LEN(len) | FTMAC110_TXD_FTS | FTMAC110_TXD_LTS; + /* set owner bit */ + ctrl |= FTMAC110_TXD_OWNER; + /* write back to descriptor */ + txd->ctrl = cpu_to_le64(ctrl); /* kick-off Tx DMA */ writel(0xffffffff, ®s->txpd); @@ -322,23 +326,24 @@ static int ftmac110_send(struct eth_device *dev, void *pkt, int len) static int ftmac110_recv(struct eth_device *dev) { struct ftmac110_chip *chip = dev->priv; - struct ftmac110_rxd *des; - uint32_t ct0, len, rlen = 0; + struct ftmac110_desc *rxd; + uint32_t len, rlen = 0; + uint64_t ctrl; uint8_t *buf; if (!chip->lnkup) return 0; do { - des = &chip->rxd[chip->rxd_idx]; - ct0 = le32_to_cpu(des->ct[0]); - if (ct0 & FTMAC110_RXCT0_OWNER) + rxd = &chip->rxd[chip->rxd_idx]; + ctrl = le64_to_cpu(rxd->ctrl); + if (ctrl & FTMAC110_RXD_OWNER) break; - len = FTMAC110_RXCT0_LEN(ct0); - buf = des->vbuf; + len = (uint32_t)FTMAC110_RXD_LEN(ctrl); + buf = rxd->vbuf; - if (ct0 & FTMAC110_RXCT0_ERRMASK) { + if (ctrl & FTMAC110_RXD_ERRMASK) { printf("ftmac110: rx error\n"); } else { dma_map_single(buf, len, DMA_FROM_DEVICE); @@ -347,7 +352,9 @@ static int ftmac110_recv(struct eth_device *dev) } /* owned by hardware */ - des->ct[0] = cpu_to_le32(FTMAC110_RXCT0_OWNER); + ctrl &= FTMAC110_RXD_CLRMASK; + ctrl |= FTMAC110_RXD_OWNER; + rxd->ctrl |= cpu_to_le64(ctrl); chip->rxd_idx = (chip->rxd_idx + 1) % CFG_RXDES_NUM; } while (0); @@ -422,42 +429,43 @@ int ftmac110_initialize(bd_t *bis) /* allocate tx descriptors (it must be 16 bytes aligned) */ chip->txd = dma_alloc_coherent( - sizeof(struct ftmac110_txd) * CFG_TXDES_NUM, &chip->txd_dma); + sizeof(struct ftmac110_desc) * CFG_TXDES_NUM, &chip->txd_dma); if (!chip->txd) panic("ftmac110: out of memory 3\n"); memset(chip->txd, 0, - sizeof(struct ftmac110_txd) * CFG_TXDES_NUM); + sizeof(struct ftmac110_desc) * CFG_TXDES_NUM); for (i = 0; i < CFG_TXDES_NUM; ++i) { void *va = memalign(ARCH_DMA_MINALIGN, CFG_XBUF_SIZE); + if (!va) panic("ftmac110: out of memory 4\n"); - chip->txd[i].vbuf = va; - chip->txd[i].buf = cpu_to_le32(virt_to_phys(va)); - chip->txd[i].ct[1] = 0; - chip->txd[i].ct[0] = 0; /* owned by SW */ + chip->txd[i].vbuf = va; + chip->txd[i].pbuf = cpu_to_le32(virt_to_phys(va)); + chip->txd[i].ctrl = 0; /* owned by SW */ } - chip->txd[i - 1].ct[1] |= cpu_to_le32(FTMAC110_TXCT1_END); + chip->txd[i - 1].ctrl |= cpu_to_le64(FTMAC110_TXD_END); chip->txd_idx = 0; /* allocate rx descriptors (it must be 16 bytes aligned) */ chip->rxd = dma_alloc_coherent( - sizeof(struct ftmac110_rxd) * CFG_RXDES_NUM, &chip->rxd_dma); + sizeof(struct ftmac110_desc) * CFG_RXDES_NUM, &chip->rxd_dma); if (!chip->rxd) panic("ftmac110: out of memory 4\n"); memset((void *)chip->rxd, 0, - sizeof(struct ftmac110_rxd) * CFG_RXDES_NUM); + sizeof(struct ftmac110_desc) * CFG_RXDES_NUM); for (i = 0; i < CFG_RXDES_NUM; ++i) { void *va = memalign(ARCH_DMA_MINALIGN, CFG_XBUF_SIZE + 2); + if (!va) panic("ftmac110: out of memory 5\n"); /* it needs to be exactly 2 bytes aligned */ va = ((uint8_t *)va + 2); - chip->rxd[i].vbuf = va; - chip->rxd[i].buf = cpu_to_le32(virt_to_phys(va)); - chip->rxd[i].ct[1] = cpu_to_le32(CFG_XBUF_SIZE); - chip->rxd[i].ct[0] = cpu_to_le32(FTMAC110_RXCT0_OWNER); + chip->rxd[i].vbuf = va; + chip->rxd[i].pbuf = cpu_to_le32(virt_to_phys(va)); + chip->rxd[i].ctrl = cpu_to_le64(FTMAC110_RXD_OWNER + | FTMAC110_RXD_BUFSZ(CFG_XBUF_SIZE)); } - chip->rxd[i - 1].ct[1] |= cpu_to_le32(FTMAC110_RXCT1_END); + chip->rxd[i - 1].ctrl |= cpu_to_le64(FTMAC110_RXD_END); chip->rxd_idx = 0; eth_register(dev); diff --git a/drivers/net/ftmac110.h b/drivers/net/ftmac110.h index 19e4248..2772ae7 100644 --- a/drivers/net/ftmac110.h +++ b/drivers/net/ftmac110.h @@ -1,7 +1,7 @@ /* * Faraday 10/100Mbps Ethernet Controller * - * (C) Copyright 2010 Faraday Technology + * (C) Copyright 2013 Faraday Technology * Dante Su <dantesu@faraday-tech.com> * * SPDX-License-Identifier: GPL-2.0+ @@ -135,42 +135,42 @@ struct ftmac110_regs { /* * descriptor structure */ -struct ftmac110_rxd { - uint32_t ct[2]; - uint32_t buf; - void *vbuf; /* reserved */ +struct ftmac110_desc { + uint64_t ctrl; + uint32_t pbuf; + void *vbuf; }; -#define FTMAC110_RXCT0_OWNER BIT_MASK(31) /* owner: 1=HW, 0=SW */ -#define FTMAC110_RXCT0_FRS BIT_MASK(29) /* first pkt desc */ -#define FTMAC110_RXCT0_LRS BIT_MASK(28) /* last pkt desc */ -#define FTMAC110_RXCT0_ODDNB BIT_MASK(22) /* odd nibble */ -#define FTMAC110_RXCT0_RUNT BIT_MASK(21) /* runt pkt */ -#define FTMAC110_RXCT0_FTL BIT_MASK(20) /* frame too long */ -#define FTMAC110_RXCT0_CRC BIT_MASK(19) /* pkt crc error */ -#define FTMAC110_RXCT0_ERR BIT_MASK(18) /* bus error */ -#define FTMAC110_RXCT0_ERRMASK (0x1f << 18) /* all errors */ -#define FTMAC110_RXCT0_BCST BIT_MASK(17) /* Bcst pkt */ -#define FTMAC110_RXCT0_MCST BIT_MASK(16) /* Mcst pkt */ -#define FTMAC110_RXCT0_LEN(x) ((x) & 0x7ff) - -#define FTMAC110_RXCT1_END BIT_MASK(31) -#define FTMAC110_RXCT1_BUFSZ(x) ((x) & 0x7ff) - -struct ftmac110_txd { - uint32_t ct[2]; - uint32_t buf; - void *vbuf; /* reserved */ -}; - -#define FTMAC110_TXCT0_OWNER BIT_MASK(31) /* owner: 1=HW, 0=SW */ -#define FTMAC110_TXCT0_COL 0x00000003 /* collision */ - -#define FTMAC110_TXCT1_END BIT_MASK(31) /* end of ring */ -#define FTMAC110_TXCT1_TXIC BIT_MASK(30) /* tx done interrupt */ -#define FTMAC110_TXCT1_TX2FIC BIT_MASK(29) /* tx fifo interrupt */ -#define FTMAC110_TXCT1_FTS BIT_MASK(28) /* first pkt desc */ -#define FTMAC110_TXCT1_LTS BIT_MASK(27) /* last pkt desc */ -#define FTMAC110_TXCT1_LEN(x) ((x) & 0x7ff) +#define FTMAC110_RXD_END ((uint64_t)1 << 63) +#define FTMAC110_RXD_BUFSZ(x) (((uint64_t)(x) & 0x7ff) << 32) + +#define FTMAC110_RXD_OWNER ((uint64_t)1 << 31) /* owner: 1=HW, 0=SW */ +#define FTMAC110_RXD_FRS ((uint64_t)1 << 29) /* first pkt desc */ +#define FTMAC110_RXD_LRS ((uint64_t)1 << 28) /* last pkt desc */ +#define FTMAC110_RXD_ODDNB ((uint64_t)1 << 22) /* odd nibble */ +#define FTMAC110_RXD_RUNT ((uint64_t)1 << 21) /* runt pkt */ +#define FTMAC110_RXD_FTL ((uint64_t)1 << 20) /* frame too long */ +#define FTMAC110_RXD_CRC ((uint64_t)1 << 19) /* pkt crc error */ +#define FTMAC110_RXD_ERR ((uint64_t)1 << 18) /* bus error */ +#define FTMAC110_RXD_ERRMASK ((uint64_t)0x1f << 18) +#define FTMAC110_RXD_BCST ((uint64_t)1 << 17) /* Bcst pkt */ +#define FTMAC110_RXD_MCST ((uint64_t)1 << 16) /* Mcst pkt */ +#define FTMAC110_RXD_LEN(x) ((uint64_t)((x) & 0x7ff)) + +#define FTMAC110_RXD_CLRMASK \ + (FTMAC110_RXD_END | FTMAC110_RXD_BUFSZ(0x7ff)) + +#define FTMAC110_TXD_END ((uint64_t)1 << 63) /* end of ring */ +#define FTMAC110_TXD_TXIC ((uint64_t)1 << 62) /* tx done interrupt */ +#define FTMAC110_TXD_TX2FIC ((uint64_t)1 << 61) /* tx fifo interrupt */ +#define FTMAC110_TXD_FTS ((uint64_t)1 << 60) /* first pkt desc */ +#define FTMAC110_TXD_LTS ((uint64_t)1 << 59) /* last pkt desc */ +#define FTMAC110_TXD_LEN(x) ((uint64_t)((x) & 0x7ff) << 32) + +#define FTMAC110_TXD_OWNER ((uint64_t)1 << 31) /* owner: 1=HW, 0=SW */ +#define FTMAC110_TXD_COL ((uint64_t)3) /* collision */ + +#define FTMAC110_TXD_CLRMASK \ + (FTMAC110_TXD_END) #endif /* FTMAC110_H */ diff --git a/drivers/net/lan91c96.c b/drivers/net/lan91c96.c index 2bf0068..229658a 100644 --- a/drivers/net/lan91c96.c +++ b/drivers/net/lan91c96.c @@ -766,7 +766,7 @@ static int lan91c96_detect_chip(struct eth_device *dev) SMC_SELECT_BANK(dev, 3); chip_id = (SMC_inw(dev, 0xA) & LAN91C96_REV_CHIPID) >> 4; SMC_SELECT_BANK(dev, 0); - for (r = 0; r < sizeof(supported_chips) / sizeof(struct id_type); r++) + for (r = 0; r < ARRAY_SIZE(supported_chips); r++) if (chip_id == supported_chips[r].id) return r; return 0; diff --git a/drivers/net/macb.c b/drivers/net/macb.c index 1f7cc32..bf3983a 100644 --- a/drivers/net/macb.c +++ b/drivers/net/macb.c @@ -36,6 +36,7 @@ #include <asm/io.h> #include <asm/dma-mapping.h> #include <asm/arch/clk.h> +#include <asm-generic/errno.h> #include "macb.h" @@ -397,9 +398,14 @@ static int macb_phy_init(struct macb_device *macb) } #ifdef CONFIG_PHYLIB - phydev->bus = macb->bus; - phydev->dev = netdev; - phydev->addr = macb->phy_addr; + /* need to consider other phy interface mode */ + phydev = phy_connect(macb->bus, macb->phy_addr, netdev, + PHY_INTERFACE_MODE_RGMII); + if (!phydev) { + printf("phy_connect failed\n"); + return -ENODEV; + } + phy_config(phydev); #endif diff --git a/drivers/net/mcffec.c b/drivers/net/mcffec.c index 6b537d5..7c4b210 100644 --- a/drivers/net/mcffec.c +++ b/drivers/net/mcffec.c @@ -543,7 +543,7 @@ int mcffec_initialize(bd_t * bis) u32 tmp = CONFIG_SYS_INIT_RAM_ADDR + 0x1000; #endif - for (i = 0; i < sizeof(fec_info) / sizeof(fec_info[0]); i++) { + for (i = 0; i < ARRAY_SIZE(fec_info); i++) { dev = (struct eth_device *)memalign(CONFIG_SYS_CACHELINE_SIZE, diff --git a/drivers/net/mcfmii.c b/drivers/net/mcfmii.c index 2f2269d..17a780c 100644 --- a/drivers/net/mcfmii.c +++ b/drivers/net/mcfmii.c @@ -170,7 +170,7 @@ int mii_discover_phy(struct eth_device *dev) printf("PHY @ 0x%x pass %d\n", phyno, pass); #endif - for (i = 0; (i < (sizeof(phyinfo) / sizeof(phy_info_t))) + for (i = 0; (i < ARRAY_SIZE(phyinfo)) && (phyinfo[i].phyid != 0); i++) { if (phyinfo[i].phyid == phytype) { #ifdef ET_DEBUG diff --git a/drivers/net/ne2000.c b/drivers/net/ne2000.c index 3939158..e6cd3e9 100644 --- a/drivers/net/ne2000.c +++ b/drivers/net/ne2000.c @@ -228,7 +228,7 @@ int get_prom(u8* mac_addr, u8* base_addr) mdelay (10); - for (i = 0; i < sizeof (program_seq) / sizeof (program_seq[0]); i++) + for (i = 0; i < ARRAY_SIZE(program_seq); i++) n2k_outb (program_seq[i].value, program_seq[i].offset); PRINTK ("PROM:"); diff --git a/drivers/net/npe/IxEthAcc.c b/drivers/net/npe/IxEthAcc.c index 7185558..05a9e05 100644 --- a/drivers/net/npe/IxEthAcc.c +++ b/drivers/net/npe/IxEthAcc.c @@ -18,31 +18,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxEthAccCommon.c b/drivers/net/npe/IxEthAccCommon.c index b93a8c8..8249737 100644 --- a/drivers/net/npe/IxEthAccCommon.c +++ b/drivers/net/npe/IxEthAccCommon.c @@ -18,31 +18,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxEthAccControlInterface.c b/drivers/net/npe/IxEthAccControlInterface.c index 4432847..dbe32e1 100644 --- a/drivers/net/npe/IxEthAccControlInterface.c +++ b/drivers/net/npe/IxEthAccControlInterface.c @@ -18,31 +18,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxEthAccDataPlane.c b/drivers/net/npe/IxEthAccDataPlane.c index 6df3307..c0b82d9 100644 --- a/drivers/net/npe/IxEthAccDataPlane.c +++ b/drivers/net/npe/IxEthAccDataPlane.c @@ -19,31 +19,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxEthAccMac.c b/drivers/net/npe/IxEthAccMac.c index 5540b33..6511344 100644 --- a/drivers/net/npe/IxEthAccMac.c +++ b/drivers/net/npe/IxEthAccMac.c @@ -18,31 +18,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxEthAccMii.c b/drivers/net/npe/IxEthAccMii.c index d282aa6..bfe606f 100644 --- a/drivers/net/npe/IxEthAccMii.c +++ b/drivers/net/npe/IxEthAccMii.c @@ -17,31 +17,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxEthDBAPI.c b/drivers/net/npe/IxEthDBAPI.c index d46c47c..023cf50 100644 --- a/drivers/net/npe/IxEthDBAPI.c +++ b/drivers/net/npe/IxEthDBAPI.c @@ -13,31 +13,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxEthDBAPISupport.c b/drivers/net/npe/IxEthDBAPISupport.c index 1facb89..c265d94 100644 --- a/drivers/net/npe/IxEthDBAPISupport.c +++ b/drivers/net/npe/IxEthDBAPISupport.c @@ -13,31 +13,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxEthDBCore.c b/drivers/net/npe/IxEthDBCore.c index 8b3c1d9..3d3050d 100644 --- a/drivers/net/npe/IxEthDBCore.c +++ b/drivers/net/npe/IxEthDBCore.c @@ -13,31 +13,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxEthDBEvents.c b/drivers/net/npe/IxEthDBEvents.c index 529063d..5b3be0b 100644 --- a/drivers/net/npe/IxEthDBEvents.c +++ b/drivers/net/npe/IxEthDBEvents.c @@ -13,31 +13,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxEthDBFeatures.c b/drivers/net/npe/IxEthDBFeatures.c index c5b680a..1f76240 100644 --- a/drivers/net/npe/IxEthDBFeatures.c +++ b/drivers/net/npe/IxEthDBFeatures.c @@ -13,31 +13,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ @@ -144,7 +120,7 @@ void ixEthDBFeatureCapabilityScan(void) /* find the traffic class definition index compatible with the current NPE A functionality ID */ for (trafficClassDefinitionIndex = 0 ; - trafficClassDefinitionIndex < sizeof (ixEthDBTrafficClassDefinitions) / sizeof (ixEthDBTrafficClassDefinitions[0]); + trafficClassDefinitionIndex < ARRAY_SIZE(ixEthDBTrafficClassDefinitions); trafficClassDefinitionIndex++) { if (ixEthDBTrafficClassDefinitions[trafficClassDefinitionIndex][IX_ETH_DB_NPE_A_FUNCTIONALITY_ID_INDEX] == npeAImageId.functionalityId) @@ -155,7 +131,7 @@ void ixEthDBFeatureCapabilityScan(void) } /* select the default case if we went over the array boundary */ - if (trafficClassDefinitionIndex == sizeof (ixEthDBTrafficClassDefinitions) / sizeof (ixEthDBTrafficClassDefinitions[0])) + if (trafficClassDefinitionIndex == ARRAY_SIZE(ixEthDBTrafficClassDefinitions)) { trafficClassDefinitionIndex = 0; /* the first record is the default case */ } diff --git a/drivers/net/npe/IxEthDBFirewall.c b/drivers/net/npe/IxEthDBFirewall.c index 6fb5ab6..c0ae562 100644 --- a/drivers/net/npe/IxEthDBFirewall.c +++ b/drivers/net/npe/IxEthDBFirewall.c @@ -13,31 +13,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxEthDBHashtable.c b/drivers/net/npe/IxEthDBHashtable.c index f1b18e6..9493a5b 100644 --- a/drivers/net/npe/IxEthDBHashtable.c +++ b/drivers/net/npe/IxEthDBHashtable.c @@ -13,31 +13,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxEthDBLearning.c b/drivers/net/npe/IxEthDBLearning.c index 8406741..1080d11 100644 --- a/drivers/net/npe/IxEthDBLearning.c +++ b/drivers/net/npe/IxEthDBLearning.c @@ -11,31 +11,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxEthDBMem.c b/drivers/net/npe/IxEthDBMem.c index 133cbef..78fce4b 100644 --- a/drivers/net/npe/IxEthDBMem.c +++ b/drivers/net/npe/IxEthDBMem.c @@ -13,31 +13,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxEthDBNPEAdaptor.c b/drivers/net/npe/IxEthDBNPEAdaptor.c index d47ffec..30e1f61 100644 --- a/drivers/net/npe/IxEthDBNPEAdaptor.c +++ b/drivers/net/npe/IxEthDBNPEAdaptor.c @@ -13,31 +13,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxEthDBPortUpdate.c b/drivers/net/npe/IxEthDBPortUpdate.c index 813e4ee..92af331 100644 --- a/drivers/net/npe/IxEthDBPortUpdate.c +++ b/drivers/net/npe/IxEthDBPortUpdate.c @@ -13,31 +13,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxEthDBReports.c b/drivers/net/npe/IxEthDBReports.c index 912e608..d74f121 100644 --- a/drivers/net/npe/IxEthDBReports.c +++ b/drivers/net/npe/IxEthDBReports.c @@ -13,31 +13,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxEthDBSearch.c b/drivers/net/npe/IxEthDBSearch.c index 75fdebe..4fd28da 100644 --- a/drivers/net/npe/IxEthDBSearch.c +++ b/drivers/net/npe/IxEthDBSearch.c @@ -11,31 +11,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxEthDBSpanningTree.c b/drivers/net/npe/IxEthDBSpanningTree.c index 029f7ac..e12be0d 100644 --- a/drivers/net/npe/IxEthDBSpanningTree.c +++ b/drivers/net/npe/IxEthDBSpanningTree.c @@ -13,31 +13,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxEthDBUtil.c b/drivers/net/npe/IxEthDBUtil.c index 24acc24..40d4470 100644 --- a/drivers/net/npe/IxEthDBUtil.c +++ b/drivers/net/npe/IxEthDBUtil.c @@ -13,31 +13,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxEthDBVlan.c b/drivers/net/npe/IxEthDBVlan.c index 522a30b..483e348 100644 --- a/drivers/net/npe/IxEthDBVlan.c +++ b/drivers/net/npe/IxEthDBVlan.c @@ -13,31 +13,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxEthDBWiFi.c b/drivers/net/npe/IxEthDBWiFi.c index 0a6043f..44edd47 100644 --- a/drivers/net/npe/IxEthDBWiFi.c +++ b/drivers/net/npe/IxEthDBWiFi.c @@ -13,31 +13,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxEthMii.c b/drivers/net/npe/IxEthMii.c index f8b439d..27f3548 100644 --- a/drivers/net/npe/IxEthMii.c +++ b/drivers/net/npe/IxEthMii.c @@ -19,31 +19,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxFeatureCtrl.c b/drivers/net/npe/IxFeatureCtrl.c index b6728e4..0b6807d 100644 --- a/drivers/net/npe/IxFeatureCtrl.c +++ b/drivers/net/npe/IxFeatureCtrl.c @@ -17,31 +17,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxNpeDl.c b/drivers/net/npe/IxNpeDl.c index bfeac87..0e5c428 100644 --- a/drivers/net/npe/IxNpeDl.c +++ b/drivers/net/npe/IxNpeDl.c @@ -18,31 +18,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxNpeDlImageMgr.c b/drivers/net/npe/IxNpeDlImageMgr.c index 0484483..52f73d7 100644 --- a/drivers/net/npe/IxNpeDlImageMgr.c +++ b/drivers/net/npe/IxNpeDlImageMgr.c @@ -18,31 +18,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxNpeDlNpeMgr.c b/drivers/net/npe/IxNpeDlNpeMgr.c index aaffeeb..8d94dfa 100644 --- a/drivers/net/npe/IxNpeDlNpeMgr.c +++ b/drivers/net/npe/IxNpeDlNpeMgr.c @@ -18,31 +18,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxNpeDlNpeMgrUtils.c b/drivers/net/npe/IxNpeDlNpeMgrUtils.c index 18cac50..db50d22 100644 --- a/drivers/net/npe/IxNpeDlNpeMgrUtils.c +++ b/drivers/net/npe/IxNpeDlNpeMgrUtils.c @@ -18,31 +18,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxNpeMh.c b/drivers/net/npe/IxNpeMh.c index 2870ff7..5adabd8 100644 --- a/drivers/net/npe/IxNpeMh.c +++ b/drivers/net/npe/IxNpeMh.c @@ -18,31 +18,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxNpeMhConfig.c b/drivers/net/npe/IxNpeMhConfig.c index 092d480..eaa9a21 100644 --- a/drivers/net/npe/IxNpeMhConfig.c +++ b/drivers/net/npe/IxNpeMhConfig.c @@ -18,31 +18,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxNpeMhReceive.c b/drivers/net/npe/IxNpeMhReceive.c index 57c8be3..273c373 100644 --- a/drivers/net/npe/IxNpeMhReceive.c +++ b/drivers/net/npe/IxNpeMhReceive.c @@ -16,33 +16,9 @@ * @par * Copyright 2001-2005, Intel Corporation. * All rights reserved. - * - * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * + * * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxNpeMhSend.c b/drivers/net/npe/IxNpeMhSend.c index 27bc9b7..8b70388 100644 --- a/drivers/net/npe/IxNpeMhSend.c +++ b/drivers/net/npe/IxNpeMhSend.c @@ -18,31 +18,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxNpeMhSolicitedCbMgr.c b/drivers/net/npe/IxNpeMhSolicitedCbMgr.c index 8e083a6..c539d09 100644 --- a/drivers/net/npe/IxNpeMhSolicitedCbMgr.c +++ b/drivers/net/npe/IxNpeMhSolicitedCbMgr.c @@ -18,31 +18,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxNpeMhUnsolicitedCbMgr.c b/drivers/net/npe/IxNpeMhUnsolicitedCbMgr.c index d37f9f9..082f677 100644 --- a/drivers/net/npe/IxNpeMhUnsolicitedCbMgr.c +++ b/drivers/net/npe/IxNpeMhUnsolicitedCbMgr.c @@ -18,31 +18,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxOsalBufferMgt.c b/drivers/net/npe/IxOsalBufferMgt.c index fa8db47..f70ba05 100644 --- a/drivers/net/npe/IxOsalBufferMgt.c +++ b/drivers/net/npe/IxOsalBufferMgt.c @@ -16,31 +16,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxOsalIoMem.c b/drivers/net/npe/IxOsalIoMem.c index 34df92b..bf3acdc 100644 --- a/drivers/net/npe/IxOsalIoMem.c +++ b/drivers/net/npe/IxOsalIoMem.c @@ -14,31 +14,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ @@ -66,8 +42,7 @@ ixOsalMemMapFind (UINT32 requestedAddress, { UINT32 mapIndex; - UINT32 numMapElements = - sizeof (ixOsalGlobalMemoryMap) / sizeof (IxOsalMemoryMap); + UINT32 numMapElements = ARRAY_SIZE(ixOsalGlobalMemoryMap); for (mapIndex = 0; mapIndex < numMapElements; mapIndex++) { diff --git a/drivers/net/npe/IxOsalOsCacheMMU.c b/drivers/net/npe/IxOsalOsCacheMMU.c index 3db1a70..72d22e5 100644 --- a/drivers/net/npe/IxOsalOsCacheMMU.c +++ b/drivers/net/npe/IxOsalOsCacheMMU.c @@ -14,31 +14,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxOsalOsMsgQ.c b/drivers/net/npe/IxOsalOsMsgQ.c index 45a5c68..5fe368b 100644 --- a/drivers/net/npe/IxOsalOsMsgQ.c +++ b/drivers/net/npe/IxOsalOsMsgQ.c @@ -14,31 +14,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxOsalOsSemaphore.c b/drivers/net/npe/IxOsalOsSemaphore.c index 672bec1..33de7f6 100644 --- a/drivers/net/npe/IxOsalOsSemaphore.c +++ b/drivers/net/npe/IxOsalOsSemaphore.c @@ -14,31 +14,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxOsalOsServices.c b/drivers/net/npe/IxOsalOsServices.c index e18c6c4..a9aa368 100644 --- a/drivers/net/npe/IxOsalOsServices.c +++ b/drivers/net/npe/IxOsalOsServices.c @@ -14,31 +14,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxOsalOsThread.c b/drivers/net/npe/IxOsalOsThread.c index e6a4967..b3caae1 100644 --- a/drivers/net/npe/IxOsalOsThread.c +++ b/drivers/net/npe/IxOsalOsThread.c @@ -14,31 +14,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxQMgrAqmIf.c b/drivers/net/npe/IxQMgrAqmIf.c index 7386513..69138cc 100644 --- a/drivers/net/npe/IxQMgrAqmIf.c +++ b/drivers/net/npe/IxQMgrAqmIf.c @@ -20,33 +20,9 @@ * @par * Copyright 2001-2005, Intel Corporation. * All rights reserved. - * - * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * + * * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxQMgrDispatcher.c b/drivers/net/npe/IxQMgrDispatcher.c index 25a3e85..2baeaaf 100644 --- a/drivers/net/npe/IxQMgrDispatcher.c +++ b/drivers/net/npe/IxQMgrDispatcher.c @@ -17,31 +17,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxQMgrInit.c b/drivers/net/npe/IxQMgrInit.c index 61ca96c..14687e6 100644 --- a/drivers/net/npe/IxQMgrInit.c +++ b/drivers/net/npe/IxQMgrInit.c @@ -17,31 +17,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxQMgrQAccess.c b/drivers/net/npe/IxQMgrQAccess.c index 8885736..13ee0f4 100644 --- a/drivers/net/npe/IxQMgrQAccess.c +++ b/drivers/net/npe/IxQMgrQAccess.c @@ -18,31 +18,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/IxQMgrQCfg.c b/drivers/net/npe/IxQMgrQCfg.c index 26ec327..b64bb2d 100644 --- a/drivers/net/npe/IxQMgrQCfg.c +++ b/drivers/net/npe/IxQMgrQCfg.c @@ -20,31 +20,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxAssert.h b/drivers/net/npe/include/IxAssert.h index eae8b3f..8be0caf 100644 --- a/drivers/net/npe/include/IxAssert.h +++ b/drivers/net/npe/include/IxAssert.h @@ -16,31 +16,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxAtmSch.h b/drivers/net/npe/include/IxAtmSch.h index 73c3be2..7d74771 100644 --- a/drivers/net/npe/include/IxAtmSch.h +++ b/drivers/net/npe/include/IxAtmSch.h @@ -25,31 +25,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- * diff --git a/drivers/net/npe/include/IxAtmTypes.h b/drivers/net/npe/include/IxAtmTypes.h index 8624c33..6c8d12f 100644 --- a/drivers/net/npe/include/IxAtmTypes.h +++ b/drivers/net/npe/include/IxAtmTypes.h @@ -15,31 +15,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxAtmdAcc.h b/drivers/net/npe/include/IxAtmdAcc.h index ae7b243..291b662 100644 --- a/drivers/net/npe/include/IxAtmdAcc.h +++ b/drivers/net/npe/include/IxAtmdAcc.h @@ -20,31 +20,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxAtmdAccCtrl.h b/drivers/net/npe/include/IxAtmdAccCtrl.h index 7b87345..1a696b0 100644 --- a/drivers/net/npe/include/IxAtmdAccCtrl.h +++ b/drivers/net/npe/include/IxAtmdAccCtrl.h @@ -20,31 +20,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxAtmm.h b/drivers/net/npe/include/IxAtmm.h index fcf523f..805b8c9 100644 --- a/drivers/net/npe/include/IxAtmm.h +++ b/drivers/net/npe/include/IxAtmm.h @@ -16,31 +16,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxDmaAcc.h b/drivers/net/npe/include/IxDmaAcc.h index 45c7527..a62e72c 100644 --- a/drivers/net/npe/include/IxDmaAcc.h +++ b/drivers/net/npe/include/IxDmaAcc.h @@ -16,31 +16,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxEthAcc.h b/drivers/net/npe/include/IxEthAcc.h index ff706c4..cc7e010 100644 --- a/drivers/net/npe/include/IxEthAcc.h +++ b/drivers/net/npe/include/IxEthAcc.h @@ -17,31 +17,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- * diff --git a/drivers/net/npe/include/IxEthAccDataPlane_p.h b/drivers/net/npe/include/IxEthAccDataPlane_p.h index 8b8e6b2..dce43d9 100644 --- a/drivers/net/npe/include/IxEthAccDataPlane_p.h +++ b/drivers/net/npe/include/IxEthAccDataPlane_p.h @@ -19,31 +19,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxEthAccMac_p.h b/drivers/net/npe/include/IxEthAccMac_p.h index 93e9d98..4eafab2 100644 --- a/drivers/net/npe/include/IxEthAccMac_p.h +++ b/drivers/net/npe/include/IxEthAccMac_p.h @@ -10,31 +10,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxEthAccMii_p.h b/drivers/net/npe/include/IxEthAccMii_p.h index 568d4a0..aff30f0 100644 --- a/drivers/net/npe/include/IxEthAccMii_p.h +++ b/drivers/net/npe/include/IxEthAccMii_p.h @@ -19,31 +19,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxEthAccQueueAssign_p.h b/drivers/net/npe/include/IxEthAccQueueAssign_p.h index e5fd16e..65661a0 100644 --- a/drivers/net/npe/include/IxEthAccQueueAssign_p.h +++ b/drivers/net/npe/include/IxEthAccQueueAssign_p.h @@ -19,31 +19,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxEthAcc_p.h b/drivers/net/npe/include/IxEthAcc_p.h index eda3e30..1348f4e 100644 --- a/drivers/net/npe/include/IxEthAcc_p.h +++ b/drivers/net/npe/include/IxEthAcc_p.h @@ -19,31 +19,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxEthDB.h b/drivers/net/npe/include/IxEthDB.h index dfdfe1a..9c4a6a4 100644 --- a/drivers/net/npe/include/IxEthDB.h +++ b/drivers/net/npe/include/IxEthDB.h @@ -13,31 +13,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- * diff --git a/drivers/net/npe/include/IxEthDBLocks_p.h b/drivers/net/npe/include/IxEthDBLocks_p.h index 1d8b24f..91ab441 100644 --- a/drivers/net/npe/include/IxEthDBLocks_p.h +++ b/drivers/net/npe/include/IxEthDBLocks_p.h @@ -13,31 +13,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxEthDBLog_p.h b/drivers/net/npe/include/IxEthDBLog_p.h index 1d6b0bb..b357623 100644 --- a/drivers/net/npe/include/IxEthDBLog_p.h +++ b/drivers/net/npe/include/IxEthDBLog_p.h @@ -13,31 +13,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxEthDBMessages_p.h b/drivers/net/npe/include/IxEthDBMessages_p.h index ff18160..5907fd5 100644 --- a/drivers/net/npe/include/IxEthDBMessages_p.h +++ b/drivers/net/npe/include/IxEthDBMessages_p.h @@ -13,31 +13,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxEthDBPortDefs.h b/drivers/net/npe/include/IxEthDBPortDefs.h index c3acbdd..9f5e467 100644 --- a/drivers/net/npe/include/IxEthDBPortDefs.h +++ b/drivers/net/npe/include/IxEthDBPortDefs.h @@ -13,31 +13,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ @@ -106,7 +82,7 @@ static const IxEthDBPortDefinition ixEthDBPortDefinitions[] = * @def IX_ETH_DB_NUMBER_OF_PORTS * @brief number of supported ports */ -#define IX_ETH_DB_NUMBER_OF_PORTS (sizeof (ixEthDBPortDefinitions) / sizeof (ixEthDBPortDefinitions[0])) +#define IX_ETH_DB_NUMBER_OF_PORTS ARRAY_SIZE(ixEthDBPortDefinitions) /** * @def IX_ETH_DB_UNKNOWN_PORT diff --git a/drivers/net/npe/include/IxEthDBQoS.h b/drivers/net/npe/include/IxEthDBQoS.h index 6d34889..6276930 100644 --- a/drivers/net/npe/include/IxEthDBQoS.h +++ b/drivers/net/npe/include/IxEthDBQoS.h @@ -13,31 +13,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxEthDB_p.h b/drivers/net/npe/include/IxEthDB_p.h index d173d12..ddc10a5 100644 --- a/drivers/net/npe/include/IxEthDB_p.h +++ b/drivers/net/npe/include/IxEthDB_p.h @@ -13,31 +13,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxEthMii.h b/drivers/net/npe/include/IxEthMii.h index 93d3b79..8d7de3d 100644 --- a/drivers/net/npe/include/IxEthMii.h +++ b/drivers/net/npe/include/IxEthMii.h @@ -33,31 +33,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxEthMii_p.h b/drivers/net/npe/include/IxEthMii_p.h index 104b65c..0c48a69 100644 --- a/drivers/net/npe/include/IxEthMii_p.h +++ b/drivers/net/npe/include/IxEthMii_p.h @@ -19,31 +19,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxEthNpe.h b/drivers/net/npe/include/IxEthNpe.h index 21bdedc..20bfa76 100644 --- a/drivers/net/npe/include/IxEthNpe.h +++ b/drivers/net/npe/include/IxEthNpe.h @@ -13,31 +13,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxFeatureCtrl.h b/drivers/net/npe/include/IxFeatureCtrl.h index 1662a00..987b00b 100644 --- a/drivers/net/npe/include/IxFeatureCtrl.h +++ b/drivers/net/npe/include/IxFeatureCtrl.h @@ -17,31 +17,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxHssAcc.h b/drivers/net/npe/include/IxHssAcc.h index 52d5716..da71c42 100644 --- a/drivers/net/npe/include/IxHssAcc.h +++ b/drivers/net/npe/include/IxHssAcc.h @@ -17,31 +17,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxI2cDrv.h b/drivers/net/npe/include/IxI2cDrv.h index 92c6b24..0331540 100644 --- a/drivers/net/npe/include/IxI2cDrv.h +++ b/drivers/net/npe/include/IxI2cDrv.h @@ -15,31 +15,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxNpeA.h b/drivers/net/npe/include/IxNpeA.h index 90669c2..e145b43 100644 --- a/drivers/net/npe/include/IxNpeA.h +++ b/drivers/net/npe/include/IxNpeA.h @@ -18,31 +18,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxNpeDl.h b/drivers/net/npe/include/IxNpeDl.h index f514c2e..f87ee4b 100644 --- a/drivers/net/npe/include/IxNpeDl.h +++ b/drivers/net/npe/include/IxNpeDl.h @@ -17,31 +17,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxNpeDlImageMgr_p.h b/drivers/net/npe/include/IxNpeDlImageMgr_p.h index 622f879..34dd3a4 100644 --- a/drivers/net/npe/include/IxNpeDlImageMgr_p.h +++ b/drivers/net/npe/include/IxNpeDlImageMgr_p.h @@ -17,31 +17,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxNpeDlMacros_p.h b/drivers/net/npe/include/IxNpeDlMacros_p.h index e32906a..771fe74 100644 --- a/drivers/net/npe/include/IxNpeDlMacros_p.h +++ b/drivers/net/npe/include/IxNpeDlMacros_p.h @@ -17,31 +17,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxNpeDlNpeMgrEcRegisters_p.h b/drivers/net/npe/include/IxNpeDlNpeMgrEcRegisters_p.h index f682126..f6c2e46 100644 --- a/drivers/net/npe/include/IxNpeDlNpeMgrEcRegisters_p.h +++ b/drivers/net/npe/include/IxNpeDlNpeMgrEcRegisters_p.h @@ -15,31 +15,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxNpeDlNpeMgrUtils_p.h b/drivers/net/npe/include/IxNpeDlNpeMgrUtils_p.h index 876a438..bb1f4ab 100644 --- a/drivers/net/npe/include/IxNpeDlNpeMgrUtils_p.h +++ b/drivers/net/npe/include/IxNpeDlNpeMgrUtils_p.h @@ -16,31 +16,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxNpeDlNpeMgr_p.h b/drivers/net/npe/include/IxNpeDlNpeMgr_p.h index e25e532..989db2c 100644 --- a/drivers/net/npe/include/IxNpeDlNpeMgr_p.h +++ b/drivers/net/npe/include/IxNpeDlNpeMgr_p.h @@ -16,31 +16,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxNpeMh.h b/drivers/net/npe/include/IxNpeMh.h index 20ee38b..3a2bf9f 100644 --- a/drivers/net/npe/include/IxNpeMh.h +++ b/drivers/net/npe/include/IxNpeMh.h @@ -17,31 +17,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxNpeMhConfig_p.h b/drivers/net/npe/include/IxNpeMhConfig_p.h index 8c8b9ab..ca47f7f 100644 --- a/drivers/net/npe/include/IxNpeMhConfig_p.h +++ b/drivers/net/npe/include/IxNpeMhConfig_p.h @@ -17,31 +17,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxNpeMhMacros_p.h b/drivers/net/npe/include/IxNpeMhMacros_p.h index 68f34ef..51ee9e2 100644 --- a/drivers/net/npe/include/IxNpeMhMacros_p.h +++ b/drivers/net/npe/include/IxNpeMhMacros_p.h @@ -17,31 +17,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxNpeMhReceive_p.h b/drivers/net/npe/include/IxNpeMhReceive_p.h index 6416bed..7b2afa0 100644 --- a/drivers/net/npe/include/IxNpeMhReceive_p.h +++ b/drivers/net/npe/include/IxNpeMhReceive_p.h @@ -17,31 +17,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxNpeMhSend_p.h b/drivers/net/npe/include/IxNpeMhSend_p.h index 977cc94..0f060cc 100644 --- a/drivers/net/npe/include/IxNpeMhSend_p.h +++ b/drivers/net/npe/include/IxNpeMhSend_p.h @@ -17,31 +17,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxNpeMhSolicitedCbMgr_p.h b/drivers/net/npe/include/IxNpeMhSolicitedCbMgr_p.h index 40cd496..b094fd9 100644 --- a/drivers/net/npe/include/IxNpeMhSolicitedCbMgr_p.h +++ b/drivers/net/npe/include/IxNpeMhSolicitedCbMgr_p.h @@ -18,31 +18,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxNpeMhUnsolicitedCbMgr_p.h b/drivers/net/npe/include/IxNpeMhUnsolicitedCbMgr_p.h index dea8caf..faf6638 100644 --- a/drivers/net/npe/include/IxNpeMhUnsolicitedCbMgr_p.h +++ b/drivers/net/npe/include/IxNpeMhUnsolicitedCbMgr_p.h @@ -18,31 +18,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxNpeMicrocode.h b/drivers/net/npe/include/IxNpeMicrocode.h index 893d803..01dcd7a 100644 --- a/drivers/net/npe/include/IxNpeMicrocode.h +++ b/drivers/net/npe/include/IxNpeMicrocode.h @@ -18,31 +18,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsBufLib.h b/drivers/net/npe/include/IxOsBufLib.h index a297a97..68341dc 100644 --- a/drivers/net/npe/include/IxOsBufLib.h +++ b/drivers/net/npe/include/IxOsBufLib.h @@ -16,31 +16,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- * diff --git a/drivers/net/npe/include/IxOsBuffMgt.h b/drivers/net/npe/include/IxOsBuffMgt.h index b7de712..8b2ee96 100644 --- a/drivers/net/npe/include/IxOsBuffMgt.h +++ b/drivers/net/npe/include/IxOsBuffMgt.h @@ -14,31 +14,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsBuffPoolMgt.h b/drivers/net/npe/include/IxOsBuffPoolMgt.h index 4a983c7..1e39be2 100644 --- a/drivers/net/npe/include/IxOsBuffPoolMgt.h +++ b/drivers/net/npe/include/IxOsBuffPoolMgt.h @@ -16,31 +16,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- * This module contains the implementation of the OS Services buffer pool diff --git a/drivers/net/npe/include/IxOsCacheMMU.h b/drivers/net/npe/include/IxOsCacheMMU.h index 2c8592f..2632cef 100644 --- a/drivers/net/npe/include/IxOsCacheMMU.h +++ b/drivers/net/npe/include/IxOsCacheMMU.h @@ -15,31 +15,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsPrintf.h b/drivers/net/npe/include/IxOsPrintf.h index 218e140..7b573a4 100644 --- a/drivers/net/npe/include/IxOsPrintf.h +++ b/drivers/net/npe/include/IxOsPrintf.h @@ -13,31 +13,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsServices.h b/drivers/net/npe/include/IxOsServices.h index 62e8a79..d3b8850 100644 --- a/drivers/net/npe/include/IxOsServices.h +++ b/drivers/net/npe/include/IxOsServices.h @@ -14,31 +14,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsServicesComponents.h b/drivers/net/npe/include/IxOsServicesComponents.h index d662cd3..c5a6f68 100644 --- a/drivers/net/npe/include/IxOsServicesComponents.h +++ b/drivers/net/npe/include/IxOsServicesComponents.h @@ -15,31 +15,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsServicesEndianess.h b/drivers/net/npe/include/IxOsServicesEndianess.h index 0d6cd8c..383e30a 100644 --- a/drivers/net/npe/include/IxOsServicesEndianess.h +++ b/drivers/net/npe/include/IxOsServicesEndianess.h @@ -15,31 +15,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsServicesMemAccess.h b/drivers/net/npe/include/IxOsServicesMemAccess.h index 58e9941..896db14 100644 --- a/drivers/net/npe/include/IxOsServicesMemAccess.h +++ b/drivers/net/npe/include/IxOsServicesMemAccess.h @@ -15,31 +15,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsServicesMemMap.h b/drivers/net/npe/include/IxOsServicesMemMap.h index 4ce37c3..8af1081 100644 --- a/drivers/net/npe/include/IxOsServicesMemMap.h +++ b/drivers/net/npe/include/IxOsServicesMemMap.h @@ -15,31 +15,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsal.h b/drivers/net/npe/include/IxOsal.h index 28c44af..ac2631c 100644 --- a/drivers/net/npe/include/IxOsal.h +++ b/drivers/net/npe/include/IxOsal.h @@ -14,31 +14,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsalAssert.h b/drivers/net/npe/include/IxOsalAssert.h index 04a4f51..ac26bb6 100644 --- a/drivers/net/npe/include/IxOsalAssert.h +++ b/drivers/net/npe/include/IxOsalAssert.h @@ -15,31 +15,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsalBackward.h b/drivers/net/npe/include/IxOsalBackward.h index ea9f307..8e4a6fb 100644 --- a/drivers/net/npe/include/IxOsalBackward.h +++ b/drivers/net/npe/include/IxOsalBackward.h @@ -16,31 +16,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsalBackwardAssert.h b/drivers/net/npe/include/IxOsalBackwardAssert.h index be1e272..cf50a7a 100644 --- a/drivers/net/npe/include/IxOsalBackwardAssert.h +++ b/drivers/net/npe/include/IxOsalBackwardAssert.h @@ -16,31 +16,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsalBackwardBufferMgt.h b/drivers/net/npe/include/IxOsalBackwardBufferMgt.h index 4cf80d3..46df29d 100644 --- a/drivers/net/npe/include/IxOsalBackwardBufferMgt.h +++ b/drivers/net/npe/include/IxOsalBackwardBufferMgt.h @@ -16,31 +16,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsalBackwardCacheMMU.h b/drivers/net/npe/include/IxOsalBackwardCacheMMU.h index fe570e6..d9e20c0 100644 --- a/drivers/net/npe/include/IxOsalBackwardCacheMMU.h +++ b/drivers/net/npe/include/IxOsalBackwardCacheMMU.h @@ -16,31 +16,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsalBackwardMemMap.h b/drivers/net/npe/include/IxOsalBackwardMemMap.h index 3881a3b..9b6cc72 100644 --- a/drivers/net/npe/include/IxOsalBackwardMemMap.h +++ b/drivers/net/npe/include/IxOsalBackwardMemMap.h @@ -16,31 +16,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsalBackwardOsServices.h b/drivers/net/npe/include/IxOsalBackwardOsServices.h index 0ccff84..761779d 100644 --- a/drivers/net/npe/include/IxOsalBackwardOsServices.h +++ b/drivers/net/npe/include/IxOsalBackwardOsServices.h @@ -16,31 +16,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsalBackwardOssl.h b/drivers/net/npe/include/IxOsalBackwardOssl.h index 634b494..c9deb54 100644 --- a/drivers/net/npe/include/IxOsalBackwardOssl.h +++ b/drivers/net/npe/include/IxOsalBackwardOssl.h @@ -16,31 +16,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsalBufferMgt.h b/drivers/net/npe/include/IxOsalBufferMgt.h index 497ed04..1f9e373 100644 --- a/drivers/net/npe/include/IxOsalBufferMgt.h +++ b/drivers/net/npe/include/IxOsalBufferMgt.h @@ -15,31 +15,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ @@ -49,33 +25,6 @@ * @par * Copyright 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 * The Regents of the University of California. All rights reserved. - * - * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsalBufferMgtDefault.h b/drivers/net/npe/include/IxOsalBufferMgtDefault.h index 684b52e..376c498 100644 --- a/drivers/net/npe/include/IxOsalBufferMgtDefault.h +++ b/drivers/net/npe/include/IxOsalBufferMgtDefault.h @@ -16,31 +16,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsalConfig.h b/drivers/net/npe/include/IxOsalConfig.h index d56e796..81449f1 100644 --- a/drivers/net/npe/include/IxOsalConfig.h +++ b/drivers/net/npe/include/IxOsalConfig.h @@ -14,31 +14,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsalEndianess.h b/drivers/net/npe/include/IxOsalEndianess.h index 3b1c739..01de2c5 100644 --- a/drivers/net/npe/include/IxOsalEndianess.h +++ b/drivers/net/npe/include/IxOsalEndianess.h @@ -16,31 +16,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsalIoMem.h b/drivers/net/npe/include/IxOsalIoMem.h index ea6d64d..7cb9c18 100644 --- a/drivers/net/npe/include/IxOsalIoMem.h +++ b/drivers/net/npe/include/IxOsalIoMem.h @@ -17,31 +17,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsalMemAccess.h b/drivers/net/npe/include/IxOsalMemAccess.h index 9e7fb87..be7472a 100644 --- a/drivers/net/npe/include/IxOsalMemAccess.h +++ b/drivers/net/npe/include/IxOsalMemAccess.h @@ -16,31 +16,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsalOem.h b/drivers/net/npe/include/IxOsalOem.h index f894026..a1f4d21 100644 --- a/drivers/net/npe/include/IxOsalOem.h +++ b/drivers/net/npe/include/IxOsalOem.h @@ -14,31 +14,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsalOsBufferMgt.h b/drivers/net/npe/include/IxOsalOsBufferMgt.h index 8e46586..53b9616 100644 --- a/drivers/net/npe/include/IxOsalOsBufferMgt.h +++ b/drivers/net/npe/include/IxOsalOsBufferMgt.h @@ -15,31 +15,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsalOsIxp400.h b/drivers/net/npe/include/IxOsalOsIxp400.h index 44a94fb..104c733 100644 --- a/drivers/net/npe/include/IxOsalOsIxp400.h +++ b/drivers/net/npe/include/IxOsalOsIxp400.h @@ -15,31 +15,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsalOsIxp400CustomizedMapping.h b/drivers/net/npe/include/IxOsalOsIxp400CustomizedMapping.h index 47ce3a2..e037823 100644 --- a/drivers/net/npe/include/IxOsalOsIxp400CustomizedMapping.h +++ b/drivers/net/npe/include/IxOsalOsIxp400CustomizedMapping.h @@ -22,31 +22,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxOsalTypes.h b/drivers/net/npe/include/IxOsalTypes.h index 06e71de..aefa70f 100644 --- a/drivers/net/npe/include/IxOsalTypes.h +++ b/drivers/net/npe/include/IxOsalTypes.h @@ -15,31 +15,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ @@ -91,12 +67,6 @@ typedef volatile UINT32 VUINT32; */ typedef volatile INT32 VINT32; - -#ifndef NUMELEMS -#define NUMELEMS(x) (sizeof(x) / sizeof((x)[0])) -#endif - - /** * @ingroup IxOsalTypes * diff --git a/drivers/net/npe/include/IxOsalUtilitySymbols.h b/drivers/net/npe/include/IxOsalUtilitySymbols.h index f2a73db..ec34df6 100644 --- a/drivers/net/npe/include/IxOsalUtilitySymbols.h +++ b/drivers/net/npe/include/IxOsalUtilitySymbols.h @@ -14,31 +14,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxParityENAcc.h b/drivers/net/npe/include/IxParityENAcc.h index 62fe171..4d44838 100644 --- a/drivers/net/npe/include/IxParityENAcc.h +++ b/drivers/net/npe/include/IxParityENAcc.h @@ -17,31 +17,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxPerfProfAcc.h b/drivers/net/npe/include/IxPerfProfAcc.h index 7e4527a..2781ec8 100644 --- a/drivers/net/npe/include/IxPerfProfAcc.h +++ b/drivers/net/npe/include/IxPerfProfAcc.h @@ -14,31 +14,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxQMgr.h b/drivers/net/npe/include/IxQMgr.h index 03d7e07..23a4541 100644 --- a/drivers/net/npe/include/IxQMgr.h +++ b/drivers/net/npe/include/IxQMgr.h @@ -31,31 +31,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxQMgrAqmIf_p.h b/drivers/net/npe/include/IxQMgrAqmIf_p.h index b63c4a9..1b9cfd2 100644 --- a/drivers/net/npe/include/IxQMgrAqmIf_p.h +++ b/drivers/net/npe/include/IxQMgrAqmIf_p.h @@ -32,31 +32,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxQMgrDefines_p.h b/drivers/net/npe/include/IxQMgrDefines_p.h index 0183596..1c5d674 100644 --- a/drivers/net/npe/include/IxQMgrDefines_p.h +++ b/drivers/net/npe/include/IxQMgrDefines_p.h @@ -17,31 +17,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxQMgrDispatcher_p.h b/drivers/net/npe/include/IxQMgrDispatcher_p.h index 71a3f85..b68a3f1 100644 --- a/drivers/net/npe/include/IxQMgrDispatcher_p.h +++ b/drivers/net/npe/include/IxQMgrDispatcher_p.h @@ -17,31 +17,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxQMgrLog_p.h b/drivers/net/npe/include/IxQMgrLog_p.h index 6b685b8..941236a 100644 --- a/drivers/net/npe/include/IxQMgrLog_p.h +++ b/drivers/net/npe/include/IxQMgrLog_p.h @@ -17,31 +17,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxQMgrQAccess_p.h b/drivers/net/npe/include/IxQMgrQAccess_p.h index 8612670..363622f 100644 --- a/drivers/net/npe/include/IxQMgrQAccess_p.h +++ b/drivers/net/npe/include/IxQMgrQAccess_p.h @@ -17,31 +17,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxQMgrQCfg_p.h b/drivers/net/npe/include/IxQMgrQCfg_p.h index c9dae1e..5480214 100644 --- a/drivers/net/npe/include/IxQMgrQCfg_p.h +++ b/drivers/net/npe/include/IxQMgrQCfg_p.h @@ -17,31 +17,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxQueueAssignments.h b/drivers/net/npe/include/IxQueueAssignments.h index b65d621..28b9247 100644 --- a/drivers/net/npe/include/IxQueueAssignments.h +++ b/drivers/net/npe/include/IxQueueAssignments.h @@ -23,31 +23,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxSspAcc.h b/drivers/net/npe/include/IxSspAcc.h index 61d911b..b4a9def 100644 --- a/drivers/net/npe/include/IxSspAcc.h +++ b/drivers/net/npe/include/IxSspAcc.h @@ -15,31 +15,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxTimeSyncAcc.h b/drivers/net/npe/include/IxTimeSyncAcc.h index 52c4c1c..f8bcffe 100644 --- a/drivers/net/npe/include/IxTimeSyncAcc.h +++ b/drivers/net/npe/include/IxTimeSyncAcc.h @@ -19,31 +19,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxTimerCtrl.h b/drivers/net/npe/include/IxTimerCtrl.h index 669dd3e..a865b93 100644 --- a/drivers/net/npe/include/IxTimerCtrl.h +++ b/drivers/net/npe/include/IxTimerCtrl.h @@ -22,31 +22,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxTypes.h b/drivers/net/npe/include/IxTypes.h index c4c5a2d..f936a50 100644 --- a/drivers/net/npe/include/IxTypes.h +++ b/drivers/net/npe/include/IxTypes.h @@ -21,31 +21,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxUART.h b/drivers/net/npe/include/IxUART.h index 03a4444..ff23b22 100644 --- a/drivers/net/npe/include/IxUART.h +++ b/drivers/net/npe/include/IxUART.h @@ -30,31 +30,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/IxVersionId.h b/drivers/net/npe/include/IxVersionId.h index 27796ed..1769dcd 100644 --- a/drivers/net/npe/include/IxVersionId.h +++ b/drivers/net/npe/include/IxVersionId.h @@ -16,31 +16,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- */ diff --git a/drivers/net/npe/include/ix_error.h b/drivers/net/npe/include/ix_error.h index d32ace2..4c59999 100644 --- a/drivers/net/npe/include/ix_error.h +++ b/drivers/net/npe/include/ix_error.h @@ -12,31 +12,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- * = PRODUCT diff --git a/drivers/net/npe/include/ix_macros.h b/drivers/net/npe/include/ix_macros.h index 53f5942..b4cf760 100644 --- a/drivers/net/npe/include/ix_macros.h +++ b/drivers/net/npe/include/ix_macros.h @@ -12,31 +12,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- * = PRODUCT diff --git a/drivers/net/npe/include/ix_os_type.h b/drivers/net/npe/include/ix_os_type.h index 8575096..e14d561 100644 --- a/drivers/net/npe/include/ix_os_type.h +++ b/drivers/net/npe/include/ix_os_type.h @@ -12,31 +12,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- * = PRODUCT diff --git a/drivers/net/npe/include/ix_ossl.h b/drivers/net/npe/include/ix_ossl.h index b59f7d0..eaa2629 100644 --- a/drivers/net/npe/include/ix_ossl.h +++ b/drivers/net/npe/include/ix_ossl.h @@ -12,31 +12,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- * = PRODUCT diff --git a/drivers/net/npe/include/ix_symbols.h b/drivers/net/npe/include/ix_symbols.h index f7bb029..0006b22 100644 --- a/drivers/net/npe/include/ix_symbols.h +++ b/drivers/net/npe/include/ix_symbols.h @@ -12,31 +12,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- * = PRODUCT diff --git a/drivers/net/npe/include/ix_types.h b/drivers/net/npe/include/ix_types.h index fc7b1e9..6945506 100644 --- a/drivers/net/npe/include/ix_types.h +++ b/drivers/net/npe/include/ix_types.h @@ -12,31 +12,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- * = PRODUCT diff --git a/drivers/net/npe/include/os_datatypes.h b/drivers/net/npe/include/os_datatypes.h index 4387b2a..def891b 100644 --- a/drivers/net/npe/include/os_datatypes.h +++ b/drivers/net/npe/include/os_datatypes.h @@ -12,31 +12,7 @@ * All rights reserved. * * @par - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the Intel Corporation nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * @par - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * + * SPDX-License-Identifier: BSD-3-Clause * @par * -- End of Copyright Notice -- * = PRODUCT diff --git a/drivers/net/npe/miiphy.c b/drivers/net/npe/miiphy.c index a04779a..07fcb60 100644 --- a/drivers/net/npe/miiphy.c +++ b/drivers/net/npe/miiphy.c @@ -1,25 +1,6 @@ -/*-----------------------------------------------------------------------------+ - | This source code is dual-licensed. You may use it under the terms of the - | GNU General Public License version 2, or under the license below. - | - | This source code has been made available to you by IBM on an AS-IS - | basis. Anyone receiving this source is licensed under IBM - | copyrights to use it in any way he or she deems fit, including - | copying it, modifying it, compiling it, and redistributing it either - | with or without modifications. No license under IBM patents or - | patent applications is to be implied by the copyright license. - | - | Any user of this software should understand that IBM cannot provide - | technical support for this software and will not be responsible for - | any consequences resulting from the use of this software. - | - | Any person who transfers this source code or any derivative work - | must include the IBM copyright notice, this paragraph, and the - | preceding two paragraphs in the transferred software. - | - | COPYRIGHT I B M CORPORATION 1995 - | LICENSED MATERIAL - PROGRAM PROPERTY OF I B M - +-----------------------------------------------------------------------------*/ +/* + * SPDX-License-Identifier: GPL-2.0 ibm-pibs + */ /*-----------------------------------------------------------------------------+ | | File Name: miiphy.c diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c index 606a103..ddbbc35 100644 --- a/drivers/net/phy/realtek.c +++ b/drivers/net/phy/realtek.c @@ -12,18 +12,18 @@ #define PHY_AUTONEGOTIATE_TIMEOUT 5000 -/* RTL8211B PHY Status Register */ -#define MIIM_RTL8211B_PHY_STATUS 0x11 -#define MIIM_RTL8211B_PHYSTAT_SPEED 0xc000 -#define MIIM_RTL8211B_PHYSTAT_GBIT 0x8000 -#define MIIM_RTL8211B_PHYSTAT_100 0x4000 -#define MIIM_RTL8211B_PHYSTAT_DUPLEX 0x2000 -#define MIIM_RTL8211B_PHYSTAT_SPDDONE 0x0800 -#define MIIM_RTL8211B_PHYSTAT_LINK 0x0400 - - -/* RealTek RTL8211B */ -static int rtl8211b_config(struct phy_device *phydev) +/* RTL8211x PHY Status Register */ +#define MIIM_RTL8211x_PHY_STATUS 0x11 +#define MIIM_RTL8211x_PHYSTAT_SPEED 0xc000 +#define MIIM_RTL8211x_PHYSTAT_GBIT 0x8000 +#define MIIM_RTL8211x_PHYSTAT_100 0x4000 +#define MIIM_RTL8211x_PHYSTAT_DUPLEX 0x2000 +#define MIIM_RTL8211x_PHYSTAT_SPDDONE 0x0800 +#define MIIM_RTL8211x_PHYSTAT_LINK 0x0400 + + +/* RealTek RTL8211x */ +static int rtl8211x_config(struct phy_device *phydev) { phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, BMCR_RESET); @@ -32,20 +32,20 @@ static int rtl8211b_config(struct phy_device *phydev) return 0; } -static int rtl8211b_parse_status(struct phy_device *phydev) +static int rtl8211x_parse_status(struct phy_device *phydev) { unsigned int speed; unsigned int mii_reg; - mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211B_PHY_STATUS); + mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_RTL8211x_PHY_STATUS); - if (!(mii_reg & MIIM_RTL8211B_PHYSTAT_SPDDONE)) { + if (!(mii_reg & MIIM_RTL8211x_PHYSTAT_SPDDONE)) { int i = 0; /* in case of timeout ->link is cleared */ phydev->link = 1; puts("Waiting for PHY realtime link"); - while (!(mii_reg & MIIM_RTL8211B_PHYSTAT_SPDDONE)) { + while (!(mii_reg & MIIM_RTL8211x_PHYSTAT_SPDDONE)) { /* Timeout reached ? */ if (i > PHY_AUTONEGOTIATE_TIMEOUT) { puts(" TIMEOUT !\n"); @@ -57,29 +57,29 @@ static int rtl8211b_parse_status(struct phy_device *phydev) putc('.'); udelay(1000); /* 1 ms */ mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, - MIIM_RTL8211B_PHY_STATUS); + MIIM_RTL8211x_PHY_STATUS); } puts(" done\n"); udelay(500000); /* another 500 ms (results in faster booting) */ } else { - if (mii_reg & MIIM_RTL8211B_PHYSTAT_LINK) + if (mii_reg & MIIM_RTL8211x_PHYSTAT_LINK) phydev->link = 1; else phydev->link = 0; } - if (mii_reg & MIIM_RTL8211B_PHYSTAT_DUPLEX) + if (mii_reg & MIIM_RTL8211x_PHYSTAT_DUPLEX) phydev->duplex = DUPLEX_FULL; else phydev->duplex = DUPLEX_HALF; - speed = (mii_reg & MIIM_RTL8211B_PHYSTAT_SPEED); + speed = (mii_reg & MIIM_RTL8211x_PHYSTAT_SPEED); switch (speed) { - case MIIM_RTL8211B_PHYSTAT_GBIT: + case MIIM_RTL8211x_PHYSTAT_GBIT: phydev->speed = SPEED_1000; break; - case MIIM_RTL8211B_PHYSTAT_100: + case MIIM_RTL8211x_PHYSTAT_100: phydev->speed = SPEED_100; break; default: @@ -89,28 +89,53 @@ static int rtl8211b_parse_status(struct phy_device *phydev) return 0; } -static int rtl8211b_startup(struct phy_device *phydev) +static int rtl8211x_startup(struct phy_device *phydev) { /* Read the Status (2x to make sure link is right) */ genphy_update_link(phydev); - rtl8211b_parse_status(phydev); + rtl8211x_parse_status(phydev); return 0; } +/* Support for RTL8211B PHY */ static struct phy_driver RTL8211B_driver = { .name = "RealTek RTL8211B", .uid = 0x1cc910, .mask = 0xfffff0, .features = PHY_GBIT_FEATURES, - .config = &rtl8211b_config, - .startup = &rtl8211b_startup, + .config = &rtl8211x_config, + .startup = &rtl8211x_startup, + .shutdown = &genphy_shutdown, +}; + +/* Support for RTL8211E-VB-CG, RTL8211E-VL-CG and RTL8211EG-VB-CG PHYs */ +static struct phy_driver RTL8211E_driver = { + .name = "RealTek RTL8211E", + .uid = 0x1cc915, + .mask = 0xfffff0, + .features = PHY_GBIT_FEATURES, + .config = &rtl8211x_config, + .startup = &rtl8211x_startup, + .shutdown = &genphy_shutdown, +}; + +/* Support for RTL8211DN PHY */ +static struct phy_driver RTL8211DN_driver = { + .name = "RealTek RTL8211DN", + .uid = 0x1cc914, + .mask = 0xfffff0, + .features = PHY_GBIT_FEATURES, + .config = &rtl8211x_config, + .startup = &rtl8211x_startup, .shutdown = &genphy_shutdown, }; int phy_realtek_init(void) { phy_register(&RTL8211B_driver); + phy_register(&RTL8211E_driver); + phy_register(&RTL8211DN_driver); return 0; } diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c index f64eb8f..5936f9b 100644 --- a/drivers/net/phy/smsc.c +++ b/drivers/net/phy/smsc.c @@ -62,7 +62,7 @@ static struct phy_driver lan8710_driver = { .name = "SMSC LAN8710/LAN8720", .uid = 0x0007c0f0, .mask = 0xffff0, - .features = PHY_GBIT_FEATURES, + .features = PHY_BASIC_FEATURES, .config = &genphy_config_aneg, .startup = &smsc_startup, .shutdown = &genphy_shutdown, diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c index 17ca961..d55db1a 100644 --- a/drivers/pci/fsl_pci_init.c +++ b/drivers/pci/fsl_pci_init.c @@ -28,12 +28,6 @@ DECLARE_GLOBAL_DATA_PTR; #include <asm/io.h> #include <asm/fsl_pci.h> -/* Freescale-specific PCI config registers */ -#define FSL_PCI_PBFR 0x44 -#define FSL_PCIE_CAP_ID 0x4c -#define FSL_PCIE_CFG_RDY 0x4b0 -#define FSL_PROG_IF_AGENT 0x1 - #ifndef CONFIG_SYS_PCI_MEMORY_BUS #define CONFIG_SYS_PCI_MEMORY_BUS 0 #endif @@ -424,6 +418,15 @@ void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info) udelay(1); #endif if (pcie_cap == PCI_CAP_ID_EXP) { + if (block_rev >= PEX_IP_BLK_REV_3_0) { +#define PEX_CSR0_LTSSM_MASK 0xFC +#define PEX_CSR0_LTSSM_SHIFT 2 + ltssm = (in_be32(&pci->pex_csr0) + & PEX_CSR0_LTSSM_MASK) >> PEX_CSR0_LTSSM_SHIFT; + enabled = (ltssm == 0x11) ? 1 : 0; + } else { + /* pci_hose_read_config_word(hose, dev, PCI_LTSSM, <ssm); */ + /* enabled = ltssm >= PCI_LTSSM_L0; */ pci_hose_read_config_word(hose, dev, PCI_LTSSM, <ssm); enabled = ltssm >= PCI_LTSSM_L0; @@ -456,6 +459,7 @@ void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info) PCI_BASE_ADDRESS_0, pcicsrbar); } #endif + } #ifdef CONFIG_SYS_P4080_ERRATUM_PCIE_A003 if (enabled == 0) { @@ -564,6 +568,10 @@ int fsl_is_pci_agent(struct pci_controller *hose) u8 prog_if; pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &prog_if); + /* Programming Interface (PCI_CLASS_PROG) + * 0 == pci host or pcie root-complex, + * 1 == pci agent or pcie end-point + */ return (prog_if == FSL_PROG_IF_AGENT); } } diff --git a/drivers/power/power_i2c.c b/drivers/power/power_i2c.c index 66b3bab..ac76870 100644 --- a/drivers/power/power_i2c.c +++ b/drivers/power/power_i2c.c @@ -98,7 +98,7 @@ int pmic_reg_read(struct pmic *p, u32 reg, u32 *val) int pmic_probe(struct pmic *p) { - I2C_SET_BUS(p->bus); + i2c_set_bus_num(p->bus); debug("Bus: %d PMIC:%s probed!\n", p->bus, p->name); if (i2c_probe(pmic_i2c_addr)) { printf("Can't find PMIC:%s\n", p->name); diff --git a/drivers/serial/arm_dcc.c b/drivers/serial/arm_dcc.c index c217c88..5dfb02f 100644 --- a/drivers/serial/arm_dcc.c +++ b/drivers/serial/arm_dcc.c @@ -27,7 +27,7 @@ */ #include <common.h> -#include <stdio_dev.h> +#include <serial.h> #if defined(CONFIG_CPU_V6) /* @@ -89,12 +89,12 @@ #define TIMEOUT_COUNT 0x4000000 -int arm_dcc_init(void) +static int arm_dcc_init(void) { return 0; } -int arm_dcc_getc(void) +static int arm_dcc_getc(void) { int ch; register unsigned int reg; @@ -107,7 +107,7 @@ int arm_dcc_getc(void) return ch; } -void arm_dcc_putc(char ch) +static void arm_dcc_putc(char ch) { register unsigned int reg; unsigned int timeout_count = TIMEOUT_COUNT; @@ -123,13 +123,7 @@ void arm_dcc_putc(char ch) write_dcc(ch); } -void arm_dcc_puts(const char *s) -{ - while (*s) - arm_dcc_putc(*s++); -} - -int arm_dcc_tstc(void) +static int arm_dcc_tstc(void) { register unsigned int reg; @@ -138,22 +132,27 @@ int arm_dcc_tstc(void) return reg; } -static struct stdio_dev arm_dcc_dev; +static void arm_dcc_setbrg(void) +{ +} -int drv_arm_dcc_init(void) +static struct serial_device arm_dcc_drv = { + .name = "arm_dcc", + .start = arm_dcc_init, + .stop = NULL, + .setbrg = arm_dcc_setbrg, + .putc = arm_dcc_putc, + .puts = default_serial_puts, + .getc = arm_dcc_getc, + .tstc = arm_dcc_tstc, +}; + +void arm_dcc_initialize(void) { - strcpy(arm_dcc_dev.name, "dcc"); - arm_dcc_dev.ext = 0; /* No extensions */ - arm_dcc_dev.flags = DEV_FLAGS_INPUT | DEV_FLAGS_OUTPUT; - arm_dcc_dev.tstc = arm_dcc_tstc; /* 'tstc' function */ - arm_dcc_dev.getc = arm_dcc_getc; /* 'getc' function */ - arm_dcc_dev.putc = arm_dcc_putc; /* 'putc' function */ - arm_dcc_dev.puts = arm_dcc_puts; /* 'puts' function */ - - return stdio_register(&arm_dcc_dev); + serial_register(&arm_dcc_drv); } __weak struct serial_device *default_serial_console(void) { - return NULL; + return &arm_dcc_drv; } diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c index d77c25f..181c818 100644 --- a/drivers/serial/ns16550.c +++ b/drivers/serial/ns16550.c @@ -57,7 +57,8 @@ void NS16550_init(NS16550_t com_port, int baud_divisor) serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier); #if (defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2)) || \ - defined(CONFIG_AM33XX) || defined(CONFIG_TI814X) + defined(CONFIG_AM33XX) || defined(CONFIG_TI81XX) || \ + defined(CONFIG_AM43XX) serial_out(0x7, &com_port->mdr1); /* mode select reset TL16C750*/ #endif serial_out(UART_LCR_BKSE | UART_LCRVAL, &com_port->lcr); @@ -72,7 +73,7 @@ void NS16550_init(NS16550_t com_port, int baud_divisor) serial_out(UART_LCRVAL, &com_port->lcr); #if (defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2)) || \ defined(CONFIG_AM33XX) || defined(CONFIG_SOC_DA8XX) || \ - defined(CONFIG_TI814X) + defined(CONFIG_TI81XX) || defined(CONFIG_AM43XX) /* /16 is proper to hit 115200 with 48MHz */ serial_out(0, &com_port->mdr1); diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c index 336ff35..35dc61e 100644 --- a/drivers/serial/serial.c +++ b/drivers/serial/serial.c @@ -159,6 +159,7 @@ serial_initfunc(pl01x_serial_initialize); serial_initfunc(s3c44b0_serial_initialize); serial_initfunc(sa1100_serial_initialize); serial_initfunc(sh_serial_initialize); +serial_initfunc(arm_dcc_initialize); serial_initfunc(mxs_auart_initialize); /** @@ -252,6 +253,7 @@ void serial_initialize(void) s3c44b0_serial_initialize(); sa1100_serial_initialize(); sh_serial_initialize(); + arm_dcc_initialize(); mxs_auart_initialize(); serial_assign(default_serial_console()->name); diff --git a/drivers/serial/usbtty.h b/drivers/serial/usbtty.h index bbabb32..e243a8e 100644 --- a/drivers/serial/usbtty.h +++ b/drivers/serial/usbtty.h @@ -22,6 +22,8 @@ #include <usb/pxa27x_udc.h> #elif defined(CONFIG_DW_UDC) #include <usb/designware_udc.h> +#elif defined(CONFIG_MV_UDC) +#include <usb/mv_udc.h> #endif #include <version.h> diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 019132e..91d24ce 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -39,6 +39,7 @@ COBJS-$(CONFIG_TEGRA20_SFLASH) += tegra20_sflash.o COBJS-$(CONFIG_TEGRA20_SLINK) += tegra20_slink.o COBJS-$(CONFIG_TEGRA114_SPI) += tegra114_spi.o COBJS-$(CONFIG_XILINX_SPI) += xilinx_spi.o +COBJS-$(CONFIG_ZYNQ_SPI) += zynq_spi.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/spi/bfin_spi.c b/drivers/spi/bfin_spi.c index a9a4d92..f7192c2 100644 --- a/drivers/spi/bfin_spi.c +++ b/drivers/spi/bfin_spi.c @@ -144,10 +144,8 @@ void spi_set_speed(struct spi_slave *slave, uint hz) u32 baud; sclk = get_sclk(); - baud = sclk / (2 * hz); /* baud should be rounded up */ - if (sclk % (2 * hz)) - baud += 1; + baud = DIV_ROUND_UP(sclk, 2 * hz); if (baud < 2) baud = 2; else if (baud > (u16)-1) diff --git a/drivers/spi/fsl_espi.c b/drivers/spi/fsl_espi.c index fc0a58b..7c84582 100644 --- a/drivers/spi/fsl_espi.c +++ b/drivers/spi/fsl_espi.c @@ -75,7 +75,7 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, /* Set eSPI BRG clock source */ get_sys_info(&sysinfo); - spibrg = sysinfo.freqSystemBus / 2; + spibrg = sysinfo.freq_systembus / 2; fsl->div16 = 0; if ((spibrg / max_hz) > 32) { fsl->div16 = ESPI_CSMODE_DIV16; @@ -221,15 +221,13 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *data_out, slave->bus, slave->cs, *(uint *) dout, dout, *(uint *) din, din, len); - num_chunks = data_len / max_tran_len + - (data_len % max_tran_len ? 1 : 0); + num_chunks = DIV_ROUND_UP(data_len, max_tran_len); while (num_chunks--) { if (data_in) din = buffer + rx_offset; dout = buffer; tran_len = min(data_len , max_tran_len); - num_blks = (tran_len + cmd_len) / 4 + - ((tran_len + cmd_len) % 4 ? 1 : 0); + num_blks = DIV_ROUND_UP(tran_len + cmd_len, 4); num_bytes = (tran_len + cmd_len) % 4; fsl->data_len = tran_len + cmd_len; spi_cs_activate(slave); diff --git a/drivers/spi/mpc8xxx_spi.c b/drivers/spi/mpc8xxx_spi.c index bbfc259..348361a 100644 --- a/drivers/spi/mpc8xxx_spi.c +++ b/drivers/spi/mpc8xxx_spi.c @@ -77,7 +77,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, { volatile spi8xxx_t *spi = &((immap_t *) (CONFIG_SYS_IMMR))->spi; unsigned int tmpdout, tmpdin, event; - int numBlks = bitlen / 32 + (bitlen % 32 ? 1 : 0); + int numBlks = DIV_ROUND_UP(bitlen, 32); int tm, isRead = 0; unsigned char charSize = 32; diff --git a/drivers/spi/zynq_spi.c b/drivers/spi/zynq_spi.c new file mode 100644 index 0000000..5da8759 --- /dev/null +++ b/drivers/spi/zynq_spi.c @@ -0,0 +1,280 @@ +/* + * (C) Copyright 2013 Inc. + * + * Xilinx Zynq PS SPI controller driver (master mode only) + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <config.h> +#include <common.h> +#include <malloc.h> +#include <spi.h> +#include <asm/io.h> +#include <asm/arch/hardware.h> + +/* zynq spi register bit masks ZYNQ_SPI_<REG>_<BIT>_MASK */ +#define ZYNQ_SPI_CR_MSA_MASK (1 << 15) /* Manual start enb */ +#define ZYNQ_SPI_CR_MCS_MASK (1 << 14) /* Manual chip select */ +#define ZYNQ_SPI_CR_CS_MASK (0xF << 10) /* Chip select */ +#define ZYNQ_SPI_CR_BRD_MASK (0x7 << 3) /* Baud rate div */ +#define ZYNQ_SPI_CR_CPHA_MASK (1 << 2) /* Clock phase */ +#define ZYNQ_SPI_CR_CPOL_MASK (1 << 1) /* Clock polarity */ +#define ZYNQ_SPI_CR_MSTREN_MASK (1 << 0) /* Mode select */ +#define ZYNQ_SPI_IXR_RXNEMPTY_MASK (1 << 4) /* RX_FIFO_not_empty */ +#define ZYNQ_SPI_IXR_TXOW_MASK (1 << 2) /* TX_FIFO_not_full */ +#define ZYNQ_SPI_IXR_ALL_MASK 0x7F /* All IXR bits */ +#define ZYNQ_SPI_ENR_SPI_EN_MASK (1 << 0) /* SPI Enable */ + +#define ZYNQ_SPI_FIFO_DEPTH 128 +#ifndef CONFIG_SYS_ZYNQ_SPI_WAIT +#define CONFIG_SYS_ZYNQ_SPI_WAIT (CONFIG_SYS_HZ/100) /* 10 ms */ +#endif + +/* zynq spi register set */ +struct zynq_spi_regs { + u32 cr; /* 0x00 */ + u32 isr; /* 0x04 */ + u32 ier; /* 0x08 */ + u32 idr; /* 0x0C */ + u32 imr; /* 0x10 */ + u32 enr; /* 0x14 */ + u32 dr; /* 0x18 */ + u32 txdr; /* 0x1C */ + u32 rxdr; /* 0x20 */ +}; + +/* zynq spi slave */ +struct zynq_spi_slave { + struct spi_slave slave; + struct zynq_spi_regs *base; + u8 mode; + u8 fifo_depth; + u32 speed_hz; + u32 input_hz; + u32 req_hz; +}; + +static inline struct zynq_spi_slave *to_zynq_spi_slave(struct spi_slave *slave) +{ + return container_of(slave, struct zynq_spi_slave, slave); +} + +static inline struct zynq_spi_regs *get_zynq_spi_base(int dev) +{ + if (dev) + return (struct zynq_spi_regs *)ZYNQ_SPI_BASEADDR1; + else + return (struct zynq_spi_regs *)ZYNQ_SPI_BASEADDR0; +} + +static void zynq_spi_init_hw(struct zynq_spi_slave *zslave) +{ + u32 confr; + + /* Disable SPI */ + writel(~ZYNQ_SPI_ENR_SPI_EN_MASK, &zslave->base->enr); + + /* Disable Interrupts */ + writel(ZYNQ_SPI_IXR_ALL_MASK, &zslave->base->idr); + + /* Clear RX FIFO */ + while (readl(&zslave->base->isr) & + ZYNQ_SPI_IXR_RXNEMPTY_MASK) + readl(&zslave->base->rxdr); + + /* Clear Interrupts */ + writel(ZYNQ_SPI_IXR_ALL_MASK, &zslave->base->isr); + + /* Manual slave select and Auto start */ + confr = ZYNQ_SPI_CR_MCS_MASK | ZYNQ_SPI_CR_CS_MASK | + ZYNQ_SPI_CR_MSTREN_MASK; + confr &= ~ZYNQ_SPI_CR_MSA_MASK; + writel(confr, &zslave->base->cr); + + /* Enable SPI */ + writel(ZYNQ_SPI_ENR_SPI_EN_MASK, &zslave->base->enr); +} + +int spi_cs_is_valid(unsigned int bus, unsigned int cs) +{ + /* 2 bus with 3 chipselect */ + return bus < 2 && cs < 3; +} + +void spi_cs_activate(struct spi_slave *slave) +{ + struct zynq_spi_slave *zslave = to_zynq_spi_slave(slave); + u32 cr; + + debug("spi_cs_activate: 0x%08x\n", (u32)slave); + + clrbits_le32(&zslave->base->cr, ZYNQ_SPI_CR_CS_MASK); + cr = readl(&zslave->base->cr); + /* + * CS cal logic: CS[13:10] + * xxx0 - cs0 + * xx01 - cs1 + * x011 - cs2 + */ + cr |= (~(0x1 << slave->cs) << 10) & ZYNQ_SPI_CR_CS_MASK; + writel(cr, &zslave->base->cr); +} + +void spi_cs_deactivate(struct spi_slave *slave) +{ + struct zynq_spi_slave *zslave = to_zynq_spi_slave(slave); + + debug("spi_cs_deactivate: 0x%08x\n", (u32)slave); + + setbits_le32(&zslave->base->cr, ZYNQ_SPI_CR_CS_MASK); +} + +void spi_init() +{ + /* nothing to do */ +} + +struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, + unsigned int max_hz, unsigned int mode) +{ + struct zynq_spi_slave *zslave; + + if (!spi_cs_is_valid(bus, cs)) + return NULL; + + zslave = spi_alloc_slave(struct zynq_spi_slave, bus, cs); + if (!zslave) { + printf("SPI_error: Fail to allocate zynq_spi_slave\n"); + return NULL; + } + + zslave->base = get_zynq_spi_base(bus); + zslave->mode = mode; + zslave->fifo_depth = ZYNQ_SPI_FIFO_DEPTH; + zslave->input_hz = 166666700; + zslave->speed_hz = zslave->input_hz / 2; + zslave->req_hz = max_hz; + + /* init the zynq spi hw */ + zynq_spi_init_hw(zslave); + + return &zslave->slave; +} + +void spi_free_slave(struct spi_slave *slave) +{ + struct zynq_spi_slave *zslave = to_zynq_spi_slave(slave); + + debug("spi_free_slave: 0x%08x\n", (u32)slave); + free(zslave); +} + +int spi_claim_bus(struct spi_slave *slave) +{ + struct zynq_spi_slave *zslave = to_zynq_spi_slave(slave); + u32 confr = 0; + u8 baud_rate_val = 0; + + writel(~ZYNQ_SPI_ENR_SPI_EN_MASK, &zslave->base->enr); + + /* Set the SPI Clock phase and polarities */ + confr = readl(&zslave->base->cr); + confr &= ~(ZYNQ_SPI_CR_CPHA_MASK | ZYNQ_SPI_CR_CPOL_MASK); + if (zslave->mode & SPI_CPHA) + confr |= ZYNQ_SPI_CR_CPHA_MASK; + if (zslave->mode & SPI_CPOL) + confr |= ZYNQ_SPI_CR_CPOL_MASK; + + /* Set the clock frequency */ + if (zslave->req_hz == 0) { + /* Set baudrate x8, if the req_hz is 0 */ + baud_rate_val = 0x2; + } else if (zslave->speed_hz != zslave->req_hz) { + while ((baud_rate_val < 8) && + ((zslave->input_hz / + (2 << baud_rate_val)) > zslave->req_hz)) + baud_rate_val++; + zslave->speed_hz = zslave->req_hz / (2 << baud_rate_val); + } + confr &= ~ZYNQ_SPI_CR_BRD_MASK; + confr |= (baud_rate_val << 3); + writel(confr, &zslave->base->cr); + + writel(ZYNQ_SPI_ENR_SPI_EN_MASK, &zslave->base->enr); + + return 0; +} + +void spi_release_bus(struct spi_slave *slave) +{ + struct zynq_spi_slave *zslave = to_zynq_spi_slave(slave); + + debug("spi_release_bus: 0x%08x\n", (u32)slave); + writel(~ZYNQ_SPI_ENR_SPI_EN_MASK, &zslave->base->enr); +} + +int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, + void *din, unsigned long flags) +{ + struct zynq_spi_slave *zslave = to_zynq_spi_slave(slave); + u32 len = bitlen / 8; + u32 tx_len = len, rx_len = len, tx_tvl; + const u8 *tx_buf = dout; + u8 *rx_buf = din, buf; + u32 ts, status; + + debug("spi_xfer: bus:%i cs:%i bitlen:%i len:%i flags:%lx\n", + slave->bus, slave->cs, bitlen, len, flags); + + if (bitlen == 0) + return -1; + + if (bitlen % 8) { + debug("spi_xfer: Non byte aligned SPI transfer\n"); + return -1; + } + + if (flags & SPI_XFER_BEGIN) + spi_cs_activate(slave); + + while (rx_len > 0) { + /* Write the data into TX FIFO - tx threshold is fifo_depth */ + tx_tvl = 0; + while ((tx_tvl < zslave->fifo_depth) && tx_len) { + if (tx_buf) + buf = *tx_buf++; + else + buf = 0; + writel(buf, &zslave->base->txdr); + tx_len--; + tx_tvl++; + } + + /* Check TX FIFO completion */ + ts = get_timer(0); + status = readl(&zslave->base->isr); + while (!(status & ZYNQ_SPI_IXR_TXOW_MASK)) { + if (get_timer(ts) > CONFIG_SYS_ZYNQ_SPI_WAIT) { + printf("spi_xfer: Timeout! TX FIFO not full\n"); + return -1; + } + status = readl(&zslave->base->isr); + } + + /* Read the data from RX FIFO */ + status = readl(&zslave->base->isr); + while (status & ZYNQ_SPI_IXR_RXNEMPTY_MASK) { + buf = readl(&zslave->base->rxdr); + if (rx_buf) + *rx_buf++ = buf; + status = readl(&zslave->base->isr); + rx_len--; + } + } + + if (flags & SPI_XFER_END) + spi_cs_deactivate(slave); + + return 0; +} diff --git a/drivers/usb/eth/smsc95xx.c b/drivers/usb/eth/smsc95xx.c index b04e91c..15fd9a9 100644 --- a/drivers/usb/eth/smsc95xx.c +++ b/drivers/usb/eth/smsc95xx.c @@ -784,6 +784,7 @@ static const struct smsc95xx_dongle smsc95xx_dongles[] = { { 0x0424, 0xec00 }, /* LAN9512/LAN9514 Ethernet */ { 0x0424, 0x9500 }, /* LAN9500 Ethernet */ { 0x0424, 0x9730 }, /* LAN9730 Ethernet (HSIC) */ + { 0x0424, 0x9900 }, /* SMSC9500 USB Ethernet Device (SAL10) */ { 0x0000, 0x0000 } /* END - Do not remove */ }; diff --git a/drivers/usb/gadget/f_dfu.c b/drivers/usb/gadget/f_dfu.c index 5321a68..37d04a1 100644 --- a/drivers/usb/gadget/f_dfu.c +++ b/drivers/usb/gadget/f_dfu.c @@ -312,6 +312,8 @@ static int state_dfu_idle(struct f_dfu *f_dfu, DFU_STATE_dfuMANIFEST_WAIT_RST; to_runtime_mode(f_dfu); f_dfu->dfu_state = DFU_STATE_appIDLE; + + dfu_trigger_reset(); break; default: f_dfu->dfu_state = DFU_STATE_dfuERROR; diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index 5b348d7..b34068a 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -6,35 +6,7 @@ * Author: Michal Nazarewicz <m.nazarewicz@samsung.com> * All rights reserved. * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The names of the above-listed copyright holders may not be used - * to endorse or promote products derived from this software without - * specific prior written permission. - * - * ALTERNATIVELY, this software may be distributed under the terms of the - * GNU General Public License ("GPL") as published by the Free Software - * Foundation, either version 2 of that License or (at your option) any - * later version. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS - * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, - * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * SPDX-License-Identifier: GPL-2.0+ BSD-3-Clause */ diff --git a/drivers/usb/gadget/g_dnl.c b/drivers/usb/gadget/g_dnl.c index cbfcb2d..a3e05a8 100644 --- a/drivers/usb/gadget/g_dnl.c +++ b/drivers/usb/gadget/g_dnl.c @@ -31,8 +31,10 @@ #define STRING_MANUFACTURER 25 #define STRING_PRODUCT 2 +/* Index of String Descriptor describing this configuration */ #define STRING_USBDOWN 2 -#define CONFIG_USBDOWNLOADER 2 +/* Number of supported configurations */ +#define CONFIGURATION_NUMBER 1 #define DRIVER_VERSION "usb_dnl 2.0" @@ -54,11 +56,14 @@ static struct usb_device_descriptor device_desc = { .bNumConfigurations = 1, }; -/* static strings, in UTF-8 */ +/* + * static strings, in UTF-8 + * IDs for those strings are assigned dynamically at g_dnl_bind() + */ static struct usb_string g_dnl_string_defs[] = { - { 0, manufacturer, }, - { 1, product, }, - { } /* end of list */ + {.s = manufacturer}, + {.s = product}, + { } /* end of list */ }; static struct usb_gadget_strings g_dnl_string_tab = { @@ -104,7 +109,7 @@ static int g_dnl_config_register(struct usb_composite_dev *cdev) static struct usb_configuration config = { .label = "usb_dnload", .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER, - .bConfigurationValue = CONFIG_USBDOWNLOADER, + .bConfigurationValue = CONFIGURATION_NUMBER, .iConfiguration = STRING_USBDOWN, .bind = g_dnl_do_config, diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h index f038747..aa54b85 100644 --- a/drivers/usb/gadget/gadget_chips.h +++ b/drivers/usb/gadget/gadget_chips.h @@ -144,7 +144,7 @@ #define gadget_is_m66592(g) 0 #endif -#ifdef CONFIG_USB_GADGET_MV +#ifdef CONFIG_MV_UDC #define gadget_is_mv(g) (!strcmp("mv_udc", (g)->name)) #else #define gadget_is_mv(g) 0 diff --git a/drivers/usb/gadget/mv_udc.c b/drivers/usb/gadget/mv_udc.c index 7fa5288..7574e31 100644 --- a/drivers/usb/gadget/mv_udc.c +++ b/drivers/usb/gadget/mv_udc.c @@ -17,6 +17,20 @@ #include <linux/types.h> #include <usb/mv_udc.h> +#if CONFIG_USB_MAX_CONTROLLER_COUNT > 1 +#error This driver only supports one single controller. +#endif + +/* + * Check if the system has too long cachelines. If the cachelines are + * longer then 128b, the driver will not be able flush/invalidate data + * cache over separate QH entries. We use 128b because one QH entry is + * 64b long and there are always two QH list entries for each endpoint. + */ +#if ARCH_DMA_MINALIGN > 128 +#error This driver can not work on systems with caches longer than 128b +#endif + #ifndef DEBUG #define DBG(x...) do {} while (0) #else @@ -39,8 +53,6 @@ static const char *reqname(unsigned r) } #endif -#define PAGE_SIZE 4096 -#define QH_MAXNUM 32 static struct usb_endpoint_descriptor ep0_out_desc = { .bLength = sizeof(struct usb_endpoint_descriptor), .bDescriptorType = USB_DT_ENDPOINT, @@ -55,8 +67,6 @@ static struct usb_endpoint_descriptor ep0_in_desc = { .bmAttributes = USB_ENDPOINT_XFER_CONTROL, }; -struct ept_queue_head *epts; -struct ept_queue_item *items[2 * NUM_ENDPOINTS]; static int mv_pullup(struct usb_gadget *gadget, int is_on); static int mv_ep_enable(struct usb_ep *ep, const struct usb_endpoint_descriptor *desc); @@ -79,14 +89,115 @@ static struct usb_ep_ops mv_ep_ops = { .free_request = mv_ep_free_request, }; -static struct mv_ep ep[2 * NUM_ENDPOINTS]; +/* Init values for USB endpoints. */ +static const struct usb_ep mv_ep_init[2] = { + [0] = { /* EP 0 */ + .maxpacket = 64, + .name = "ep0", + .ops = &mv_ep_ops, + }, + [1] = { /* EP 1..n */ + .maxpacket = 512, + .name = "ep-", + .ops = &mv_ep_ops, + }, +}; + static struct mv_drv controller = { - .gadget = { - .ep0 = &ep[0].ep, - .name = "mv_udc", + .gadget = { + .name = "mv_udc", + .ops = &mv_udc_ops, }, }; +/** + * mv_get_qh() - return queue head for endpoint + * @ep_num: Endpoint number + * @dir_in: Direction of the endpoint (IN = 1, OUT = 0) + * + * This function returns the QH associated with particular endpoint + * and it's direction. + */ +static struct ept_queue_head *mv_get_qh(int ep_num, int dir_in) +{ + return &controller.epts[(ep_num * 2) + dir_in]; +} + +/** + * mv_get_qtd() - return queue item for endpoint + * @ep_num: Endpoint number + * @dir_in: Direction of the endpoint (IN = 1, OUT = 0) + * + * This function returns the QH associated with particular endpoint + * and it's direction. + */ +static struct ept_queue_item *mv_get_qtd(int ep_num, int dir_in) +{ + return controller.items[(ep_num * 2) + dir_in]; +} + +/** + * mv_flush_qh - flush cache over queue head + * @ep_num: Endpoint number + * + * This function flushes cache over QH for particular endpoint. + */ +static void mv_flush_qh(int ep_num) +{ + struct ept_queue_head *head = mv_get_qh(ep_num, 0); + const uint32_t start = (uint32_t)head; + const uint32_t end = start + 2 * sizeof(*head); + + flush_dcache_range(start, end); +} + +/** + * mv_invalidate_qh - invalidate cache over queue head + * @ep_num: Endpoint number + * + * This function invalidates cache over QH for particular endpoint. + */ +static void mv_invalidate_qh(int ep_num) +{ + struct ept_queue_head *head = mv_get_qh(ep_num, 0); + uint32_t start = (uint32_t)head; + uint32_t end = start + 2 * sizeof(*head); + + invalidate_dcache_range(start, end); +} + +/** + * mv_flush_qtd - flush cache over queue item + * @ep_num: Endpoint number + * + * This function flushes cache over qTD pair for particular endpoint. + */ +static void mv_flush_qtd(int ep_num) +{ + struct ept_queue_item *item = mv_get_qtd(ep_num, 0); + const uint32_t start = (uint32_t)item; + const uint32_t end_raw = start + 2 * sizeof(*item); + const uint32_t end = roundup(end_raw, ARCH_DMA_MINALIGN); + + flush_dcache_range(start, end); +} + +/** + * mv_invalidate_qtd - invalidate cache over queue item + * @ep_num: Endpoint number + * + * This function invalidates cache over qTD pair for particular endpoint. + */ +static void mv_invalidate_qtd(int ep_num) +{ + struct ept_queue_item *item = mv_get_qtd(ep_num, 0); + const uint32_t start = (uint32_t)item; + const uint32_t end_raw = start + 2 * sizeof(*item); + const uint32_t end = roundup(end_raw, ARCH_DMA_MINALIGN); + + invalidate_dcache_range(start, end); +} + static struct usb_request * mv_ep_alloc_request(struct usb_ep *ep, unsigned int gfp_flags) { @@ -102,9 +213,9 @@ static void mv_ep_free_request(struct usb_ep *ep, struct usb_request *_req) static void ep_enable(int num, int in) { struct ept_queue_head *head; - struct mv_udc *udc = controller.udc; + struct mv_udc *udc = (struct mv_udc *)controller.ctrl->hcor; unsigned n; - head = epts + 2*num + in; + head = mv_get_qh(num, in); n = readl(&udc->epctrl[num]); if (in) @@ -112,8 +223,10 @@ static void ep_enable(int num, int in) else n |= (CTRL_RXE | CTRL_RXR | CTRL_RXT_BULK); - if (num != 0) + if (num != 0) { head->config = CONFIG_MAX_PKT(EP_MAX_PACKET_SIZE) | CONFIG_ZLT; + mv_flush_qh(num); + } writel(n, &udc->epctrl[num]); } @@ -134,40 +247,108 @@ static int mv_ep_disable(struct usb_ep *ep) return 0; } +static int mv_bounce(struct mv_ep *ep) +{ + uint32_t addr = (uint32_t)ep->req.buf; + uint32_t ba; + + /* Input buffer address is not aligned. */ + if (addr & (ARCH_DMA_MINALIGN - 1)) + goto align; + + /* Input buffer length is not aligned. */ + if (ep->req.length & (ARCH_DMA_MINALIGN - 1)) + goto align; + + /* The buffer is well aligned, only flush cache. */ + ep->b_len = ep->req.length; + ep->b_buf = ep->req.buf; + goto flush; + +align: + /* Use internal buffer for small payloads. */ + if (ep->req.length <= 64) { + ep->b_len = 64; + ep->b_buf = ep->b_fast; + } else { + ep->b_len = roundup(ep->req.length, ARCH_DMA_MINALIGN); + ep->b_buf = memalign(ARCH_DMA_MINALIGN, ep->b_len); + if (!ep->b_buf) + return -ENOMEM; + } + + memcpy(ep->b_buf, ep->req.buf, ep->req.length); + +flush: + ba = (uint32_t)ep->b_buf; + flush_dcache_range(ba, ba + ep->b_len); + + return 0; +} + +static void mv_debounce(struct mv_ep *ep) +{ + uint32_t addr = (uint32_t)ep->req.buf; + uint32_t ba = (uint32_t)ep->b_buf; + + invalidate_dcache_range(ba, ba + ep->b_len); + + /* Input buffer address is not aligned. */ + if (addr & (ARCH_DMA_MINALIGN - 1)) + goto copy; + + /* Input buffer length is not aligned. */ + if (ep->req.length & (ARCH_DMA_MINALIGN - 1)) + goto copy; + + /* The buffer is well aligned, only invalidate cache. */ + return; + +copy: + memcpy(ep->req.buf, ep->b_buf, ep->req.length); + + /* Large payloads use allocated buffer, free it. */ + if (ep->req.length > 64) + free(ep->b_buf); +} + static int mv_ep_queue(struct usb_ep *ep, struct usb_request *req, gfp_t gfp_flags) { struct mv_ep *mv_ep = container_of(ep, struct mv_ep, ep); - struct mv_udc *udc = controller.udc; + struct mv_udc *udc = (struct mv_udc *)controller.ctrl->hcor; struct ept_queue_item *item; struct ept_queue_head *head; - unsigned phys; - int bit, num, len, in; + int bit, num, len, in, ret; num = mv_ep->desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; in = (mv_ep->desc->bEndpointAddress & USB_DIR_IN) != 0; - item = items[2 * num + in]; - head = epts + 2 * num + in; - phys = (unsigned)req->buf; + item = mv_get_qtd(num, in); + head = mv_get_qh(num, in); len = req->length; + ret = mv_bounce(mv_ep); + if (ret) + return ret; + item->next = TERMINATE; item->info = INFO_BYTES(len) | INFO_IOC | INFO_ACTIVE; - item->page0 = phys; - item->page1 = (phys & 0xfffff000) + 0x1000; + item->page0 = (uint32_t)mv_ep->b_buf; + item->page1 = ((uint32_t)mv_ep->b_buf & 0xfffff000) + 0x1000; head->next = (unsigned) item; head->info = 0; - DBG("ept%d %s queue len %x, buffer %x\n", - num, in ? "in" : "out", len, phys); + DBG("ept%d %s queue len %x, buffer %p\n", + num, in ? "in" : "out", len, mv_ep->b_buf); if (in) bit = EPT_TX(num); else bit = EPT_RX(num); - flush_cache(phys, len); - flush_cache((unsigned long)item, sizeof(struct ept_queue_item)); + mv_flush_qh(num); + mv_flush_qtd(num); + writel(bit, &udc->epprime); return 0; @@ -181,13 +362,17 @@ static void handle_ep_complete(struct mv_ep *ep) in = (ep->desc->bEndpointAddress & USB_DIR_IN) != 0; if (num == 0) ep->desc = &ep0_out_desc; - item = items[2 * num + in]; - + item = mv_get_qtd(num, in); + mv_invalidate_qtd(num); + if (item->info & 0xff) printf("EP%d/%s FAIL nfo=%x pg0=%x\n", num, in ? "in" : "out", item->info, item->page0); len = (item->info >> 16) & 0x7fff; + + mv_debounce(ep); + ep->req.length -= len; DBG("ept%d %s complete %x\n", num, in ? "in" : "out", len); @@ -203,16 +388,16 @@ static void handle_ep_complete(struct mv_ep *ep) static void handle_setup(void) { - struct usb_request *req = &ep[0].req; - struct mv_udc *udc = controller.udc; + struct usb_request *req = &controller.ep[0].req; + struct mv_udc *udc = (struct mv_udc *)controller.ctrl->hcor; struct ept_queue_head *head; struct usb_ctrlrequest r; int status = 0; int num, in, _num, _in, i; char *buf; - head = epts; + head = mv_get_qh(0, 0); /* EP0 OUT */ - flush_cache((unsigned long)head, sizeof(struct ept_queue_head)); + mv_invalidate_qh(0); memcpy(&r, head->setup_data, sizeof(struct usb_ctrlrequest)); writel(EPT_RX(0), &udc->epstat); DBG("handle setup %s, %x, %x index %x value %x\n", reqname(r.bRequest), @@ -226,11 +411,11 @@ static void handle_setup(void) if ((r.wValue == 0) && (r.wLength == 0)) { req->length = 0; for (i = 0; i < NUM_ENDPOINTS; i++) { - if (!ep[i].desc) + if (!controller.ep[i].desc) continue; - num = ep[i].desc->bEndpointAddress - & USB_ENDPOINT_NUMBER_MASK; - in = (ep[i].desc->bEndpointAddress + num = controller.ep[i].desc->bEndpointAddress + & USB_ENDPOINT_NUMBER_MASK; + in = (controller.ep[i].desc->bEndpointAddress & USB_DIR_IN) != 0; if ((num == _num) && (in == _in)) { ep_enable(num, in); @@ -277,7 +462,7 @@ static void stop_activity(void) { int i, num, in; struct ept_queue_head *head; - struct mv_udc *udc = controller.udc; + struct mv_udc *udc = (struct mv_udc *)controller.ctrl->hcor; writel(readl(&udc->epcomp), &udc->epcomp); writel(readl(&udc->epstat), &udc->epstat); writel(0xffffffff, &udc->epflush); @@ -286,19 +471,21 @@ static void stop_activity(void) for (i = 0; i < NUM_ENDPOINTS; i++) { if (i != 0) writel(0, &udc->epctrl[i]); - if (ep[i].desc) { - num = ep[i].desc->bEndpointAddress + if (controller.ep[i].desc) { + num = controller.ep[i].desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; - in = (ep[i].desc->bEndpointAddress & USB_DIR_IN) != 0; - head = epts + (num * 2) + (in); + in = (controller.ep[i].desc->bEndpointAddress + & USB_DIR_IN) != 0; + head = mv_get_qh(num, in); head->info = INFO_ACTIVE; + mv_flush_qh(num); } } } void udc_irq(void) { - struct mv_udc *udc = controller.udc; + struct mv_udc *udc = (struct mv_udc *)controller.ctrl->hcor; unsigned n = readl(&udc->usbsts); writel(n, &udc->usbsts); int bit, i, num, in; @@ -320,8 +507,8 @@ void udc_irq(void) if (bit == 2) { controller.gadget.speed = USB_SPEED_HIGH; for (i = 1; i < NUM_ENDPOINTS && n; i++) - if (ep[i].desc) - ep[i].ep.maxpacket = 512; + if (controller.ep[i].desc) + controller.ep[i].ep.maxpacket = 512; } else { controller.gadget.speed = USB_SPEED_FULL; } @@ -340,14 +527,14 @@ void udc_irq(void) writel(n, &udc->epcomp); for (i = 0; i < NUM_ENDPOINTS && n; i++) { - if (ep[i].desc) { - num = ep[i].desc->bEndpointAddress + if (controller.ep[i].desc) { + num = controller.ep[i].desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; - in = (ep[i].desc->bEndpointAddress + in = (controller.ep[i].desc->bEndpointAddress & USB_DIR_IN) != 0; bit = (in) ? EPT_TX(num) : EPT_RX(num); if (n & bit) - handle_ep_complete(&ep[i]); + handle_ep_complete(&controller.ep[i]); } } } @@ -356,7 +543,7 @@ void udc_irq(void) int usb_gadget_handle_interrupts(void) { u32 value; - struct mv_udc *udc = controller.udc; + struct mv_udc *udc = (struct mv_udc *)controller.ctrl->hcor; value = readl(&udc->usbsts); if (value) @@ -367,13 +554,13 @@ int usb_gadget_handle_interrupts(void) static int mv_pullup(struct usb_gadget *gadget, int is_on) { - struct mv_udc *udc = controller.udc; + struct mv_udc *udc = (struct mv_udc *)controller.ctrl->hcor; if (is_on) { /* RESET */ writel(USBCMD_ITC(MICRO_8FRAME) | USBCMD_RST, &udc->usbcmd); udelay(200); - writel((unsigned) epts, &udc->epinitaddr); + writel((unsigned)controller.epts, &udc->epinitaddr); /* select DEVICE mode */ writel(USBMODE_DEVICE, &udc->usbmode); @@ -395,7 +582,7 @@ static int mv_pullup(struct usb_gadget *gadget, int is_on) void udc_disconnect(void) { - struct mv_udc *udc = controller.udc; + struct mv_udc *udc = (struct mv_udc *)controller.ctrl->hcor; /* disable pullup */ stop_activity(); writel(USBCMD_FS2, &udc->usbcmd); @@ -407,18 +594,48 @@ void udc_disconnect(void) static int mvudc_probe(void) { struct ept_queue_head *head; + uint8_t *imem; int i; - controller.gadget.ops = &mv_udc_ops; - controller.udc = (struct mv_udc *)CONFIG_USB_REG_BASE; - epts = memalign(PAGE_SIZE, QH_MAXNUM * sizeof(struct ept_queue_head)); - memset(epts, 0, QH_MAXNUM * sizeof(struct ept_queue_head)); + const int num = 2 * NUM_ENDPOINTS; + + const int eplist_min_align = 4096; + const int eplist_align = roundup(eplist_min_align, ARCH_DMA_MINALIGN); + const int eplist_raw_sz = num * sizeof(struct ept_queue_head); + const int eplist_sz = roundup(eplist_raw_sz, ARCH_DMA_MINALIGN); + + const int ilist_align = roundup(ARCH_DMA_MINALIGN, 32); + const int ilist_ent_raw_sz = 2 * sizeof(struct ept_queue_item); + const int ilist_ent_sz = roundup(ilist_ent_raw_sz, ARCH_DMA_MINALIGN); + const int ilist_sz = NUM_ENDPOINTS * ilist_ent_sz; + + /* The QH list must be aligned to 4096 bytes. */ + controller.epts = memalign(eplist_align, eplist_sz); + if (!controller.epts) + return -ENOMEM; + memset(controller.epts, 0, eplist_sz); + + /* + * Each qTD item must be 32-byte aligned, each qTD touple must be + * cacheline aligned. There are two qTD items for each endpoint and + * only one of them is used for the endpoint at time, so we can group + * them together. + */ + controller.items_mem = memalign(ilist_align, ilist_sz); + if (!controller.items_mem) { + free(controller.epts); + return -ENOMEM; + } + for (i = 0; i < 2 * NUM_ENDPOINTS; i++) { /* - * For item0 and item1, they are served as ep0 - * out&in seperately + * Configure QH for each endpoint. The structure of the QH list + * is such that each two subsequent fields, N and N+1 where N is + * even, in the QH list represent QH for one endpoint. The Nth + * entry represents OUT configuration and the N+1th entry does + * represent IN configuration of the endpoint. */ - head = epts + i; + head = controller.epts + i; if (i < 2) head->config = CONFIG_MAX_PKT(EP0_MAX_PACKET_SIZE) | CONFIG_ZLT | CONFIG_IOS; @@ -428,49 +645,65 @@ static int mvudc_probe(void) head->next = TERMINATE; head->info = 0; - items[i] = memalign(PAGE_SIZE, sizeof(struct ept_queue_item)); + imem = controller.items_mem + ((i >> 1) * ilist_ent_sz); + if (i & 1) + imem += sizeof(struct ept_queue_item); + + controller.items[i] = (struct ept_queue_item *)imem; + + if (i & 1) { + mv_flush_qh(i - 1); + mv_flush_qtd(i - 1); + } } INIT_LIST_HEAD(&controller.gadget.ep_list); - ep[0].ep.maxpacket = 64; - ep[0].ep.name = "ep0"; - ep[0].desc = &ep0_in_desc; + + /* Init EP 0 */ + memcpy(&controller.ep[0].ep, &mv_ep_init[0], sizeof(*mv_ep_init)); + controller.ep[0].desc = &ep0_in_desc; + controller.gadget.ep0 = &controller.ep[0].ep; INIT_LIST_HEAD(&controller.gadget.ep0->ep_list); - for (i = 0; i < 2 * NUM_ENDPOINTS; i++) { - if (i != 0) { - ep[i].ep.maxpacket = 512; - ep[i].ep.name = "ep-"; - list_add_tail(&ep[i].ep.ep_list, - &controller.gadget.ep_list); - ep[i].desc = NULL; - } - ep[i].ep.ops = &mv_ep_ops; + + /* Init EP 1..n */ + for (i = 1; i < NUM_ENDPOINTS; i++) { + memcpy(&controller.ep[i].ep, &mv_ep_init[1], + sizeof(*mv_ep_init)); + list_add_tail(&controller.ep[i].ep.ep_list, + &controller.gadget.ep_list); } + return 0; } int usb_gadget_register_driver(struct usb_gadget_driver *driver) { - struct mv_udc *udc = controller.udc; - int retval; - - if (!driver - || driver->speed < USB_SPEED_FULL - || !driver->bind - || !driver->setup) { - DBG("bad parameter.\n"); + struct mv_udc *udc; + int ret; + + if (!driver) return -EINVAL; - } + if (!driver->bind || !driver->setup || !driver->disconnect) + return -EINVAL; + if (driver->speed != USB_SPEED_FULL && driver->speed != USB_SPEED_HIGH) + return -EINVAL; + + ret = usb_lowlevel_init(0, (void **)&controller.ctrl); + if (ret) + return ret; + + ret = mvudc_probe(); + if (!ret) { + udc = (struct mv_udc *)controller.ctrl->hcor; - if (!mvudc_probe()) { - usb_lowlevel_init(); /* select ULPI phy */ writel(PTS(PTS_ENABLE) | PFSC, &udc->portsc); } - retval = driver->bind(&controller.gadget); - if (retval) { - DBG("driver->bind() returned %d\n", retval); - return retval; + + ret = driver->bind(&controller.gadget); + if (ret) { + DBG("driver->bind() returned %d\n", ret); + return ret; } controller.driver = driver; diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 706cf0c..fdad739 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -36,16 +36,7 @@ #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 #endif -static struct ehci_ctrl { - struct ehci_hccr *hccr; /* R/O registers, not need for volatile */ - struct ehci_hcor *hcor; - int rootdev; - uint16_t portreset; - struct QH qh_list __aligned(USB_DMA_MINALIGN); - struct QH periodic_queue __aligned(USB_DMA_MINALIGN); - uint32_t *periodic_list; - int ntds; -} ehcic[CONFIG_USB_MAX_CONTROLLER_COUNT]; +static struct ehci_ctrl ehcic[CONFIG_USB_MAX_CONTROLLER_COUNT]; #define ALIGN_END_ADDR(type, ptr, size) \ ((uint32_t)(ptr) + roundup((size) * sizeof(type), USB_DMA_MINALIGN)) @@ -954,7 +945,9 @@ int usb_lowlevel_init(int index, void **controller) * Split Transactions will be spread across microframes using * S-mask and C-mask. */ - ehcic[index].periodic_list = memalign(4096, 1024*4); + if (ehcic[index].periodic_list == NULL) + ehcic[index].periodic_list = memalign(4096, 1024 * 4); + if (!ehcic[index].periodic_list) return -ENOMEM; for (i = 0; i < 1024; i++) { diff --git a/drivers/usb/host/ehci-mx5.c b/drivers/usb/host/ehci-mx5.c index 3548620..dd11f53 100644 --- a/drivers/usb/host/ehci-mx5.c +++ b/drivers/usb/host/ehci-mx5.c @@ -221,21 +221,12 @@ void __weak board_ehci_hcd_postinit(struct usb_ehci *ehci, int port) int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor) { struct usb_ehci *ehci; -#ifdef CONFIG_MX53 - struct clkctl *sc_regs = (struct clkctl *)CCM_BASE_ADDR; - u32 reg; - - reg = __raw_readl(&sc_regs->cscmr1) & ~(1 << 26); - /* derive USB PHY clock multiplexer from PLL3 */ - reg |= 1 << 26; - __raw_writel(reg, &sc_regs->cscmr1); -#endif set_usboh3_clk(); - enable_usboh3_clk(1); + enable_usboh3_clk(true); set_usb_phy_clk(); - enable_usb_phy1_clk(1); - enable_usb_phy2_clk(1); + enable_usb_phy1_clk(true); + enable_usb_phy2_clk(true); mdelay(1); /* Do board specific initialization */ diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index a47e078..3c58f9e 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -28,18 +28,21 @@ static struct omap_ehci *const ehci = (struct omap_ehci *)OMAP_EHCI_BASE; static int omap_uhh_reset(void) { - unsigned long init = get_timer(0); - - /* perform UHH soft reset, and wait until reset is complete */ - writel(OMAP_UHH_SYSCONFIG_SOFTRESET, &uhh->sysc); - - /* Wait for UHH reset to complete */ - while (!(readl(&uhh->syss) & OMAP_UHH_SYSSTATUS_EHCI_RESETDONE)) - if (get_timer(init) > CONFIG_SYS_HZ) { - debug("OMAP UHH error: timeout resetting ehci\n"); - return -EL3RST; - } - +/* + * Soft resetting the UHH module causes instability issues on + * all OMAPs so we just avoid it. + * + * See OMAP36xx Errata + * i571: USB host EHCI may stall when entering smart-standby mode + * i660: USBHOST Configured In Smart-Idle Can Lead To a Deadlock + * + * On OMAP4/5, soft-resetting the UHH module will put it into + * Smart-Idle mode and lead to a deadlock. + * + * On OMAP3, this doesn't seem to be the case but still instabilities + * are observed on beagle (3530 ES1.0) if soft-reset is used. + * e.g. NFS root failures with Linux kernel. + */ return 0; } @@ -76,6 +79,7 @@ static void omap_usbhs_hsic_init(int port) writel(reg, &usbtll->channel_conf + port); } +#ifdef CONFIG_USB_ULPI static void omap_ehci_soft_phy_reset(int port) { struct ulpi_viewport ulpi_vp; @@ -85,6 +89,12 @@ static void omap_ehci_soft_phy_reset(int port) ulpi_reset(&ulpi_vp); } +#else +static void omap_ehci_soft_phy_reset(int port) +{ + return; +} +#endif inline int __board_usb_init(void) { @@ -93,7 +103,8 @@ inline int __board_usb_init(void) int board_usb_init(void) __attribute__((weak, alias("__board_usb_init"))); #if defined(CONFIG_OMAP_EHCI_PHY1_RESET_GPIO) || \ - defined(CONFIG_OMAP_EHCI_PHY2_RESET_GPIO) + defined(CONFIG_OMAP_EHCI_PHY2_RESET_GPIO) || \ + defined(CONFIG_OMAP_EHCI_PHY3_RESET_GPIO) /* controls PHY(s) reset signal(s) */ static inline void omap_ehci_phy_reset(int on, int delay) { @@ -112,6 +123,10 @@ static inline void omap_ehci_phy_reset(int on, int delay) gpio_request(CONFIG_OMAP_EHCI_PHY2_RESET_GPIO, "USB PHY2 reset"); gpio_direction_output(CONFIG_OMAP_EHCI_PHY2_RESET_GPIO, !on); #endif +#ifdef CONFIG_OMAP_EHCI_PHY3_RESET_GPIO + gpio_request(CONFIG_OMAP_EHCI_PHY3_RESET_GPIO, "USB PHY3 reset"); + gpio_direction_output(CONFIG_OMAP_EHCI_PHY3_RESET_GPIO, !on); +#endif /* Hold the PHY in RESET for enough time till DIR is high */ /* Refer: ISSUE1 */ @@ -195,10 +210,27 @@ int omap_ehci_hcd_init(struct omap_usbhs_board_data *usbhs_pdata, else setbits_le32(®, OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS); } else if (rev == OMAP_USBHS_REV2) { + clrsetbits_le32(®, (OMAP_P1_MODE_CLEAR | OMAP_P2_MODE_CLEAR), OMAP4_UHH_HOSTCONFIG_APP_START_CLK); - /* Clear port mode fields for PHY mode*/ + /* Clear port mode fields for PHY mode */ + + if (is_ehci_hsic_mode(usbhs_pdata->port_mode[0])) + setbits_le32(®, OMAP_P1_MODE_HSIC); + + if (is_ehci_hsic_mode(usbhs_pdata->port_mode[1])) + setbits_le32(®, OMAP_P2_MODE_HSIC); + + } else if (rev == OMAP_USBHS_REV2_1) { + + clrsetbits_le32(®, + (OMAP_P1_MODE_CLEAR | + OMAP_P2_MODE_CLEAR | + OMAP_P3_MODE_CLEAR), + OMAP4_UHH_HOSTCONFIG_APP_START_CLK); + + /* Clear port mode fields for PHY mode */ if (is_ehci_hsic_mode(usbhs_pdata->port_mode[0])) setbits_le32(®, OMAP_P1_MODE_HSIC); diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index d090f0a..bd52afe 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -22,6 +22,8 @@ #ifndef USB_EHCI_H #define USB_EHCI_H +#include <usb.h> + #if !defined(CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS) #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2 #endif @@ -252,6 +254,17 @@ struct QH { }; }; +struct ehci_ctrl { + struct ehci_hccr *hccr; /* R/O registers, not need for volatile */ + struct ehci_hcor *hcor; + int rootdev; + uint16_t portreset; + struct QH qh_list __aligned(USB_DMA_MINALIGN); + struct QH periodic_queue __aligned(USB_DMA_MINALIGN); + uint32_t *periodic_list; + int ntds; +}; + /* Low level init functions */ int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor); int ehci_hcd_stop(int index); diff --git a/drivers/usb/musb-new/linux-compat.h b/drivers/usb/musb-new/linux-compat.h index 72c8c2b..d7a5663 100644 --- a/drivers/usb/musb-new/linux-compat.h +++ b/drivers/usb/musb-new/linux-compat.h @@ -39,15 +39,6 @@ typedef unsigned long dmaaddr_t; #define cpu_relax() do {} while (0) #define pr_debug(fmt, args...) debug(fmt, ##args) -#define dev_dbg(dev, fmt, args...) \ - debug(fmt, ##args) -#define dev_vdbg(dev, fmt, args...) \ - debug(fmt, ##args) -#define dev_info(dev, fmt, args...) \ - printf(fmt, ##args) -#define dev_err(dev, fmt, args...) \ - printf(fmt, ##args) -#define printk printf #define WARN(condition, fmt, args...) ({ \ int ret_warn = !!condition; \ @@ -55,13 +46,6 @@ typedef unsigned long dmaaddr_t; printf(fmt, ##args); \ ret_warn; }) -#define KERN_DEBUG -#define KERN_NOTICE -#define KERN_WARNING -#define KERN_ERR - -#define kfree(ptr) free(ptr) - #define pm_runtime_get_sync(dev) do {} while (0) #define pm_runtime_put(dev) do {} while (0) #define pm_runtime_put_sync(dev) do {} while (0) diff --git a/drivers/usb/musb-new/musb_core.c b/drivers/usb/musb-new/musb_core.c index da93571..36681b6 100644 --- a/drivers/usb/musb-new/musb_core.c +++ b/drivers/usb/musb-new/musb_core.c @@ -1311,9 +1311,7 @@ static int __devinit ep_config_from_table(struct musb *musb) break; } - printk(KERN_DEBUG "%s: setup fifo_mode %d\n", - musb_driver_name, fifo_mode); - + pr_debug("%s: setup fifo_mode %d\n", musb_driver_name, fifo_mode); done: offset = fifo_setup(musb, hw_ep, &ep0_cfg, 0); @@ -1341,10 +1339,9 @@ done: musb->nr_endpoints = max(epn, musb->nr_endpoints); } - printk(KERN_DEBUG "%s: %d/%d max ep, %d/%d memory\n", - musb_driver_name, - n + 1, musb->config->num_eps * 2 - 1, - offset, (1 << (musb->config->ram_bits + 2))); + pr_debug("%s: %d/%d max ep, %d/%d memory\n", musb_driver_name, n + 1, + musb->config->num_eps * 2 - 1, offset, + (1 << (musb->config->ram_bits + 2))); if (!musb->bulk_ep) { pr_debug("%s: missing bulk\n", musb_driver_name); @@ -1447,8 +1444,7 @@ static int __devinit musb_core_init(u16 musb_type, struct musb *musb) if (reg & MUSB_CONFIGDATA_SOFTCONE) strcat(aInfo, ", SoftConn"); - printk(KERN_DEBUG "%s: ConfigData=0x%02x (%s)\n", - musb_driver_name, reg, aInfo); + pr_debug("%s:ConfigData=0x%02x (%s)\n", musb_driver_name, reg, aInfo); aDate[0] = 0; if (MUSB_CONTROLLER_MHDRC == musb_type) { @@ -1469,8 +1465,8 @@ static int __devinit musb_core_init(u16 musb_type, struct musb *musb) snprintf(aRevision, 32, "%d.%d%s", MUSB_HWVERS_MAJOR(musb->hwvers), MUSB_HWVERS_MINOR(musb->hwvers), (musb->hwvers & MUSB_HWVERS_RC) ? "RC" : ""); - printk(KERN_DEBUG "%s: %sHDRC RTL version %s %s\n", - musb_driver_name, type, aRevision, aDate); + pr_debug("%s: %sHDRC RTL version %s %s\n", musb_driver_name, type, + aRevision, aDate); /* configure ep0 */ musb_configure_ep0(musb); @@ -2122,7 +2118,7 @@ musb_init_controller(struct musb_hdrc_platform_data *plat, struct device *dev, pm_runtime_put(musb->controller); - dev_info(dev, "USB %s mode controller at %p using %s, IRQ %d\n", + pr_debug("USB %s mode controller at %p using %s, IRQ %d\n", ({char *s; switch (musb->board_mode) { case MUSB_HOST: s = "Host"; break; diff --git a/drivers/video/Makefile b/drivers/video/Makefile index f1fb26c..6c208c5 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -19,6 +19,7 @@ COBJS-$(CONFIG_EXYNOS_MIPI_DSIM) += exynos_mipi_dsi.o exynos_mipi_dsi_common.o \ exynos_mipi_dsi_lowlevel.o COBJS-$(CONFIG_EXYNOS_PWM_BL) += exynos_pwm_bl.o COBJS-$(CONFIG_FSL_DIU_FB) += fsl_diu_fb.o videomodes.o +COBJS-$(CONFIG_L5F31188) += l5f31188.o COBJS-$(CONFIG_MPC8XX_LCD) += mpc8xx_lcd.o COBJS-$(CONFIG_PXA_LCD) += pxa_lcd.o COBJS-$(CONFIG_S6E8AX0) += s6e8ax0.o @@ -40,6 +41,7 @@ COBJS-$(CONFIG_VIDEO_SM501) += sm501.o COBJS-$(CONFIG_VIDEO_SMI_LYNXEM) += smiLynxEM.o videomodes.o COBJS-$(CONFIG_VIDEO_TEGRA) += tegra.o COBJS-$(CONFIG_VIDEO_VCXK) += bus_vcxk.o +COBJS-$(CONFIG_FORMIKE) += formike.o COBJS := $(sort $(COBJS-y)) SRCS := $(COBJS:.o=.c) diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_console.c index 96ef8f9..fd28855 100644 --- a/drivers/video/cfb_console.c +++ b/drivers/video/cfb_console.c @@ -197,7 +197,6 @@ #include <linux/types.h> #include <stdio_dev.h> #include <video_font.h> -#include <video_font_data.h> #if defined(CONFIG_CMD_DATE) #include <rtc.h> @@ -431,6 +430,16 @@ static const int video_font_draw_table32[16][4] = { {0x00ffffff, 0x00ffffff, 0x00ffffff, 0x00ffffff} }; +/* + * Implement a weak default function for boards that optionally + * need to skip the cfb initialization. + */ +__weak int board_cfb_skip(void) +{ + /* As default, don't skip cfb init */ + return 0; +} + static void video_drawchars(int xx, int yy, unsigned char *s, int count) { u8 *cdat, *dest, *dest0; @@ -452,6 +461,10 @@ static void video_drawchars(int xx, int yy, unsigned char *s, int count) ((u32 *) dest)[0] = (video_font_draw_table8[bits >> 4] & eorx) ^ bgx; + + if (VIDEO_FONT_WIDTH == 4) + continue; + ((u32 *) dest)[1] = (video_font_draw_table8[bits & 15] & eorx) ^ bgx; @@ -477,6 +490,10 @@ static void video_drawchars(int xx, int yy, unsigned char *s, int count) SHORTSWAP32((video_font_draw_table15 [bits >> 4 & 3] & eorx) ^ bgx); + + if (VIDEO_FONT_WIDTH == 4) + continue; + ((u32 *) dest)[2] = SHORTSWAP32((video_font_draw_table15 [bits >> 2 & 3] & eorx) ^ @@ -507,6 +524,10 @@ static void video_drawchars(int xx, int yy, unsigned char *s, int count) SHORTSWAP32((video_font_draw_table16 [bits >> 4 & 3] & eorx) ^ bgx); + + if (VIDEO_FONT_WIDTH == 4) + continue; + ((u32 *) dest)[2] = SHORTSWAP32((video_font_draw_table16 [bits >> 2 & 3] & eorx) ^ @@ -541,6 +562,11 @@ static void video_drawchars(int xx, int yy, unsigned char *s, int count) ((u32 *) dest)[3] = SWAP32((video_font_draw_table32 [bits >> 4][3] & eorx) ^ bgx); + + + if (VIDEO_FONT_WIDTH == 4) + continue; + ((u32 *) dest)[4] = SWAP32((video_font_draw_table32 [bits & 15][0] & eorx) ^ bgx); @@ -576,6 +602,10 @@ static void video_drawchars(int xx, int yy, unsigned char *s, int count) ((u32 *) dest)[2] = (video_font_draw_table24[bits >> 4][2] & eorx) ^ bgx; + + if (VIDEO_FONT_WIDTH == 4) + continue; + ((u32 *) dest)[3] = (video_font_draw_table24[bits & 15][0] & eorx) ^ bgx; @@ -1996,6 +2026,8 @@ static void *video_logo(void) return video_fb_address + video_logo_height * VIDEO_LINE_LEN; } #endif + if (board_cfb_skip()) + return 0; sprintf(info, " %s", version_string); @@ -2205,6 +2237,9 @@ int drv_video_init(void) /* Init video chip - returns with framebuffer cleared */ skip_dev_init = (video_init() == -1); + if (board_cfb_skip()) + return 0; + #if !defined(CONFIG_VGA_AS_SINGLE_DEVICE) debug("KBD: Keyboard init ...\n"); skip_dev_init |= (VIDEO_KBD_INIT_FCT == -1); diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c index 373991d..3a5f325 100644 --- a/drivers/video/da8xx-fb.c +++ b/drivers/video/da8xx-fb.c @@ -24,10 +24,17 @@ #include <asm/arch/hardware.h> #include "videomodes.h" -#include <asm/arch/da8xx-fb.h> +#include "da8xx-fb.h" + +#if !defined(DA8XX_LCD_CNTL_BASE) +#define DA8XX_LCD_CNTL_BASE DAVINCI_LCD_CNTL_BASE +#endif #define DRIVER_NAME "da8xx_lcdc" +#define LCD_VERSION_1 1 +#define LCD_VERSION_2 2 + /* LCD Status Register */ #define LCD_END_OF_FRAME1 (1 << 9) #define LCD_END_OF_FRAME0 (1 << 8) @@ -42,9 +49,14 @@ #define LCD_DMA_BURST_4 0x2 #define LCD_DMA_BURST_8 0x3 #define LCD_DMA_BURST_16 0x4 -#define LCD_END_OF_FRAME_INT_ENA (1 << 2) +#define LCD_V1_END_OF_FRAME_INT_ENA (1 << 2) +#define LCD_V2_END_OF_FRAME0_INT_ENA (1 << 8) +#define LCD_V2_END_OF_FRAME1_INT_ENA (1 << 9) #define LCD_DUAL_FRAME_BUFFER_ENABLE (1 << 0) +#define LCD_V2_TFT_24BPP_MODE (1 << 25) +#define LCD_V2_TFT_24BPP_UNPACK (1 << 26) + /* LCD Control Register */ #define LCD_CLK_DIVISOR(x) ((x) << 8) #define LCD_RASTER_MODE 0x01 @@ -58,12 +70,20 @@ #define LCD_MONO_8BIT_MODE (1 << 9) #define LCD_RASTER_ORDER (1 << 8) #define LCD_TFT_MODE (1 << 7) -#define LCD_UNDERFLOW_INT_ENA (1 << 6) -#define LCD_PL_ENABLE (1 << 4) +#define LCD_V1_UNDERFLOW_INT_ENA (1 << 6) +#define LCD_V2_UNDERFLOW_INT_ENA (1 << 5) +#define LCD_V1_PL_INT_ENA (1 << 4) +#define LCD_V2_PL_INT_ENA (1 << 6) #define LCD_MONOCHROME_MODE (1 << 1) #define LCD_RASTER_ENABLE (1 << 0) #define LCD_TFT_ALT_ENABLE (1 << 23) #define LCD_STN_565_ENABLE (1 << 24) +#define LCD_V2_DMA_CLK_EN (1 << 2) +#define LCD_V2_LIDD_CLK_EN (1 << 1) +#define LCD_V2_CORE_CLK_EN (1 << 0) +#define LCD_V2_LPP_B10 26 +#define LCD_V2_TFT_24BPP_MODE (1 << 25) +#define LCD_V2_TFT_24BPP_UNPACK (1 << 26) /* LCD Raster Timing 2 Register */ #define LCD_AC_BIAS_TRANSITIONS_PER_INT(x) ((x) << 16) @@ -74,6 +94,8 @@ #define LCD_INVERT_LINE_CLOCK (1 << 21) #define LCD_INVERT_FRAME_CLOCK (1 << 20) +/* Clock registers available only on Version 2 */ +#define LCD_CLK_MAIN_RESET (1 << 3) /* LCD Block */ struct da8xx_lcd_regs { u32 revid; @@ -97,6 +119,15 @@ struct da8xx_lcd_regs { u32 dma_frm_buf_ceiling_addr_0; u32 dma_frm_buf_base_addr_1; u32 dma_frm_buf_ceiling_addr_1; + u32 resv1; + u32 raw_stat; + u32 masked_stat; + u32 int_ena_set; + u32 int_ena_clr; + u32 end_of_int_ind; + /* Clock registers available only on Version 2 */ + u32 clk_ena; + u32 clk_reset; }; #define LCD_NUM_BUFFERS 1 @@ -107,6 +138,8 @@ struct da8xx_lcd_regs { #define RIGHT_MARGIN 64 #define UPPER_MARGIN 32 #define LOWER_MARGIN 32 +#define WAIT_FOR_FRAME_DONE true +#define NO_WAIT_FOR_FRAME_DONE false #define calc_fbsize() (panel.plnSizeX * panel.plnSizeY * panel.gdfBytesPP) @@ -119,6 +152,8 @@ static GraphicDevice gpanel; static const struct da8xx_panel *lcd_panel; static struct fb_info *da8xx_fb_info; static int bits_x_pixel; +static unsigned int lcd_revision; +const struct lcd_ctrl_config *da8xx_lcd_cfg; static inline unsigned int lcdc_read(u32 *addr) { @@ -179,35 +214,24 @@ static struct fb_fix_screeninfo da8xx_fb_fix = { .accel = FB_ACCEL_NONE }; -static const struct display_panel disp_panel = { - QVGA, - 16, - 16, - COLOR_ACTIVE, -}; - -static const struct lcd_ctrl_config lcd_cfg = { - &disp_panel, - .ac_bias = 255, - .ac_bias_intrpt = 0, - .dma_burst_sz = 16, - .bpp = 16, - .fdd = 255, - .tft_alt_mode = 0, - .stn_565_mode = 0, - .mono_8bit_mode = 0, - .invert_line_clock = 1, - .invert_frm_clock = 1, - .sync_edge = 0, - .sync_ctrl = 1, - .raster_order = 0, -}; - /* Enable the Raster Engine of the LCD Controller */ static inline void lcd_enable_raster(void) { u32 reg; + /* Put LCDC in reset for several cycles */ + if (lcd_revision == LCD_VERSION_2) + lcdc_write(LCD_CLK_MAIN_RESET, + &da8xx_fb_reg_base->clk_reset); + + udelay(1000); + /* Bring LCDC out of reset */ + if (lcd_revision == LCD_VERSION_2) + lcdc_write(0, + &da8xx_fb_reg_base->clk_reset); + + udelay(1000); + reg = lcdc_read(&da8xx_fb_reg_base->raster_ctrl); if (!(reg & LCD_RASTER_ENABLE)) lcdc_write(reg | LCD_RASTER_ENABLE, @@ -215,14 +239,40 @@ static inline void lcd_enable_raster(void) } /* Disable the Raster Engine of the LCD Controller */ -static inline void lcd_disable_raster(void) +static inline void lcd_disable_raster(bool wait_for_frame_done) { u32 reg; + u32 loop_cnt = 0; + u32 stat; + u32 i = 0; + + if (wait_for_frame_done) + loop_cnt = 5000; reg = lcdc_read(&da8xx_fb_reg_base->raster_ctrl); if (reg & LCD_RASTER_ENABLE) lcdc_write(reg & ~LCD_RASTER_ENABLE, &da8xx_fb_reg_base->raster_ctrl); + + /* Wait for the current frame to complete */ + do { + if (lcd_revision == LCD_VERSION_1) + stat = lcdc_read(&da8xx_fb_reg_base->stat); + else + stat = lcdc_read(&da8xx_fb_reg_base->raw_stat); + + mdelay(1); + } while (!(stat & 0x01) && (i++ < loop_cnt)); + + if (lcd_revision == LCD_VERSION_1) + lcdc_write(stat, &da8xx_fb_reg_base->stat); + else + lcdc_write(stat, &da8xx_fb_reg_base->raw_stat); + + if ((loop_cnt != 0) && (i >= loop_cnt)) { + printf("LCD Controller timed out\n"); + return; + } } static void lcd_blit(int load_mode, struct da8xx_fb_par *par) @@ -231,6 +281,7 @@ static void lcd_blit(int load_mode, struct da8xx_fb_par *par) u32 end; u32 reg_ras; u32 reg_dma; + u32 reg_int; /* init reg to clear PLM (loading mode) fields */ reg_ras = lcdc_read(&da8xx_fb_reg_base->raster_ctrl); @@ -243,7 +294,15 @@ static void lcd_blit(int load_mode, struct da8xx_fb_par *par) end = par->dma_end; reg_ras |= LCD_PALETTE_LOAD_MODE(DATA_ONLY); - reg_dma |= LCD_END_OF_FRAME_INT_ENA; + if (lcd_revision == LCD_VERSION_1) { + reg_dma |= LCD_V1_END_OF_FRAME_INT_ENA; + } else { + reg_int = lcdc_read(&da8xx_fb_reg_base->int_ena_set) | + LCD_V2_END_OF_FRAME0_INT_ENA | + LCD_V2_END_OF_FRAME1_INT_ENA | + LCD_V2_UNDERFLOW_INT_ENA | LCD_SYNC_LOST; + lcdc_write(reg_int, &da8xx_fb_reg_base->int_ena_set); + } #if (LCD_NUM_BUFFERS == 2) reg_dma |= LCD_DUAL_FRAME_BUFFER_ENABLE; @@ -264,7 +323,13 @@ static void lcd_blit(int load_mode, struct da8xx_fb_par *par) end = start + par->palette_sz - 1; reg_ras |= LCD_PALETTE_LOAD_MODE(PALETTE_ONLY); - reg_ras |= LCD_PL_ENABLE; + if (lcd_revision == LCD_VERSION_1) { + reg_ras |= LCD_V1_PL_INT_ENA; + } else { + reg_int = lcdc_read(&da8xx_fb_reg_base->int_ena_set) | + LCD_V2_PL_INT_ENA; + lcdc_write(reg_int, &da8xx_fb_reg_base->int_ena_set); + } lcdc_write(start, &da8xx_fb_reg_base->dma_frm_buf_base_addr_0); lcdc_write(end, &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0); @@ -348,6 +413,7 @@ static void lcd_cfg_vertical_sync(int back_porch, int pulse_width, static int lcd_cfg_display(const struct lcd_ctrl_config *cfg) { u32 reg; + u32 reg_int; reg = lcdc_read(&da8xx_fb_reg_base->raster_ctrl) & ~(LCD_TFT_MODE | LCD_MONO_8BIT_MODE | @@ -375,7 +441,13 @@ static int lcd_cfg_display(const struct lcd_ctrl_config *cfg) } /* enable additional interrupts here */ - reg |= LCD_UNDERFLOW_INT_ENA; + if (lcd_revision == LCD_VERSION_1) { + reg |= LCD_V1_UNDERFLOW_INT_ENA; + } else { + reg_int = lcdc_read(&da8xx_fb_reg_base->int_ena_set) | + LCD_V2_UNDERFLOW_INT_ENA; + lcdc_write(reg_int, &da8xx_fb_reg_base->int_ena_set); + } lcdc_write(reg, &da8xx_fb_reg_base->raster_ctrl); @@ -413,22 +485,53 @@ static int lcd_cfg_frame_buffer(struct da8xx_fb_par *par, u32 width, u32 height, /* Set the Panel Width */ /* Pixels per line = (PPL + 1)*16 */ - /*0x3F in bits 4..9 gives max horisontal resolution = 1024 pixels*/ - width &= 0x3f0; + if (lcd_revision == LCD_VERSION_1) { + /* + * 0x3F in bits 4..9 gives max horisontal resolution = 1024 + * pixels + */ + width &= 0x3f0; + } else { + /* + * 0x7F in bits 4..10 gives max horizontal resolution = 2048 + * pixels. + */ + width &= 0x7f0; + } reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_0); reg &= 0xfffffc00; - reg |= ((width >> 4) - 1) << 4; + if (lcd_revision == LCD_VERSION_1) { + reg |= ((width >> 4) - 1) << 4; + } else { + width = (width >> 4) - 1; + reg |= ((width & 0x3f) << 4) | ((width & 0x40) >> 3); + } lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_0); /* Set the Panel Height */ + /* Set bits 9:0 of Lines Per Pixel */ reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_1); reg = ((height - 1) & 0x3ff) | (reg & 0xfffffc00); lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_1); + /* Set bit 10 of Lines Per Pixel */ + if (lcd_revision == LCD_VERSION_2) { + reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_2); + reg |= ((height - 1) & 0x400) << 16; + lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_2); + } + /* Set the Raster Order of the Frame Buffer */ reg = lcdc_read(&da8xx_fb_reg_base->raster_ctrl) & ~(1 << 8); if (raster_order) reg |= LCD_RASTER_ORDER; + + if (bpp == 24) + reg |= (LCD_TFT_MODE | LCD_V2_TFT_24BPP_MODE); + else if (bpp == 32) + reg |= (LCD_TFT_MODE | LCD_V2_TFT_24BPP_MODE + | LCD_V2_TFT_24BPP_UNPACK); + lcdc_write(reg, &da8xx_fb_reg_base->raster_ctrl); switch (bpp) { @@ -436,6 +539,8 @@ static int lcd_cfg_frame_buffer(struct da8xx_fb_par *par, u32 width, u32 height, case 2: case 4: case 16: + case 24: + case 32: par->palette_sz = 16 * 2; break; @@ -494,6 +599,23 @@ static int fb_setcolreg(unsigned regno, unsigned red, unsigned green, update_hw = 1; palette[0] = 0x4000; } + } else if (((info->var.bits_per_pixel == 32) && regno < 32) || + ((info->var.bits_per_pixel == 24) && regno < 24)) { + red >>= (24 - info->var.red.length); + red <<= info->var.red.offset; + + green >>= (24 - info->var.green.length); + green <<= info->var.green.offset; + + blue >>= (24 - info->var.blue.length); + blue <<= info->var.blue.offset; + + par->pseudo_palette[regno] = red | green | blue; + + if (palette[0] != 0x4000) { + update_hw = 1; + palette[0] = 0x4000; + } } /* Update the palette in the h/w as needed. */ @@ -506,11 +628,18 @@ static int fb_setcolreg(unsigned regno, unsigned red, unsigned green, static void lcd_reset(struct da8xx_fb_par *par) { /* Disable the Raster if previously Enabled */ - lcd_disable_raster(); + lcd_disable_raster(NO_WAIT_FOR_FRAME_DONE); /* DMA has to be disabled */ lcdc_write(0, &da8xx_fb_reg_base->dma_ctrl); lcdc_write(0, &da8xx_fb_reg_base->raster_ctrl); + + if (lcd_revision == LCD_VERSION_2) { + lcdc_write(0, &da8xx_fb_reg_base->int_ena_set); + /* Write 1 to reset */ + lcdc_write(LCD_CLK_MAIN_RESET, &da8xx_fb_reg_base->clk_reset); + lcdc_write(0, &da8xx_fb_reg_base->clk_reset); + } } static void lcd_calc_clk_divider(struct da8xx_fb_par *par) @@ -521,12 +650,17 @@ static void lcd_calc_clk_divider(struct da8xx_fb_par *par) lcd_clk = clk_get(2); div = lcd_clk / par->pxl_clk; - debug("LCD Clock: 0x%x Divider: 0x%x PixClk: 0x%x\n", - lcd_clk, div, par->pxl_clk); + debug("LCD Clock: %d Divider: %d PixClk: %d\n", + lcd_clk, div, par->pxl_clk); /* Configure the LCD clock divisor. */ lcdc_write(LCD_CLK_DIVISOR(div) | (LCD_RASTER_MODE & 0x1), &da8xx_fb_reg_base->ctrl); + + if (lcd_revision == LCD_VERSION_2) + lcdc_write(LCD_V2_DMA_CLK_EN | LCD_V2_LIDD_CLK_EN | + LCD_V2_CORE_CLK_EN, + &da8xx_fb_reg_base->clk_ena); } static int lcd_init(struct da8xx_fb_par *par, const struct lcd_ctrl_config *cfg, @@ -566,7 +700,8 @@ static int lcd_init(struct da8xx_fb_par *par, const struct lcd_ctrl_config *cfg, if (ret < 0) return ret; - if (QVGA != cfg->p_disp_panel->panel_type) + if ((QVGA != cfg->p_disp_panel->panel_type) && + (WVGA != cfg->p_disp_panel->panel_type)) return -EINVAL; if (cfg->bpp <= cfg->p_disp_panel->max_bpp && @@ -602,7 +737,7 @@ static void lcdc_dma_start(void) &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_1); } -static u32 lcdc_irq_handler(void) +static u32 lcdc_irq_handler_rev01(void) { struct da8xx_fb_par *par = da8xx_fb_info->par; u32 stat = lcdc_read(&da8xx_fb_reg_base->stat); @@ -610,7 +745,7 @@ static u32 lcdc_irq_handler(void) if ((stat & LCD_SYNC_LOST) && (stat & LCD_FIFO_UNDERFLOW)) { debug("LCD_SYNC_LOST\n"); - lcd_disable_raster(); + lcd_disable_raster(NO_WAIT_FOR_FRAME_DONE); lcdc_write(stat, &da8xx_fb_reg_base->stat); lcd_enable_raster(); return LCD_SYNC_LOST; @@ -622,13 +757,13 @@ static u32 lcdc_irq_handler(void) * interrupt via the following write to the status register. If * this is done after then one gets multiple PL done interrupts. */ - lcd_disable_raster(); + lcd_disable_raster(NO_WAIT_FOR_FRAME_DONE); lcdc_write(stat, &da8xx_fb_reg_base->stat); /* Disable PL completion inerrupt */ reg_ras = lcdc_read(&da8xx_fb_reg_base->raster_ctrl); - reg_ras &= ~LCD_PL_ENABLE; + reg_ras &= ~LCD_V1_PL_INT_ENA; lcdc_write(reg_ras, &da8xx_fb_reg_base->raster_ctrl); /* Setup and start data loading mode */ @@ -650,6 +785,66 @@ static u32 lcdc_irq_handler(void) return stat; } +static u32 lcdc_irq_handler_rev02(void) +{ + struct da8xx_fb_par *par = da8xx_fb_info->par; + u32 stat = lcdc_read(&da8xx_fb_reg_base->masked_stat); + u32 reg_int; + + if ((stat & LCD_SYNC_LOST) && (stat & LCD_FIFO_UNDERFLOW)) { + debug("LCD_SYNC_LOST\n"); + lcd_disable_raster(NO_WAIT_FOR_FRAME_DONE); + lcdc_write(stat, &da8xx_fb_reg_base->masked_stat); + lcd_enable_raster(); + lcdc_write(0, &da8xx_fb_reg_base->end_of_int_ind); + return LCD_SYNC_LOST; + } else if (stat & LCD_PL_LOAD_DONE) { + debug("LCD_PL_LOAD_DONE\n"); + /* + * Must disable raster before changing state of any control bit. + * And also must be disabled before clearing the PL loading + * interrupt via the following write to the status register. If + * this is done after then one gets multiple PL done interrupts. + */ + lcd_disable_raster(NO_WAIT_FOR_FRAME_DONE); + + lcdc_write(stat, &da8xx_fb_reg_base->masked_stat); + + /* Disable PL completion inerrupt */ + reg_int = lcdc_read(&da8xx_fb_reg_base->int_ena_clr) | + (LCD_V2_PL_INT_ENA); + lcdc_write(reg_int, &da8xx_fb_reg_base->int_ena_clr); + + /* Setup and start data loading mode */ + lcd_blit(LOAD_DATA, par); + lcdc_write(0, &da8xx_fb_reg_base->end_of_int_ind); + return LCD_PL_LOAD_DONE; + } else { + lcdc_write(stat, &da8xx_fb_reg_base->masked_stat); + + if (stat & LCD_END_OF_FRAME0) + debug("LCD_END_OF_FRAME0\n"); + + lcdc_write(par->dma_start, + &da8xx_fb_reg_base->dma_frm_buf_base_addr_0); + lcdc_write(par->dma_end, + &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0); + par->vsync_flag = 1; + lcdc_write(0, &da8xx_fb_reg_base->end_of_int_ind); + return LCD_END_OF_FRAME0; + } + lcdc_write(0, &da8xx_fb_reg_base->end_of_int_ind); + return stat; +} + +static u32 lcdc_irq_handler(void) +{ + if (lcd_revision == LCD_VERSION_1) + return lcdc_irq_handler_rev01(); + else + return lcdc_irq_handler_rev02(); +} + static u32 wait_for_event(u32 event) { u32 timeout = 50000; @@ -673,6 +868,7 @@ void *video_hw_init(void) { struct da8xx_fb_par *par; u32 size; + u32 rev; char *p; if (!lcd_panel) { @@ -685,6 +881,10 @@ void *video_hw_init(void) gpanel.plnSizeY = lcd_panel->height; switch (bits_x_pixel) { + case 32: + gpanel.gdfBytesPP = 4; + gpanel.gdfIndex = GDF_32BIT_X888RGB; + break; case 24: gpanel.gdfBytesPP = 4; gpanel.gdfIndex = GDF_32BIT_X888RGB; @@ -699,12 +899,29 @@ void *video_hw_init(void) break; } - da8xx_fb_reg_base = (struct da8xx_lcd_regs *)DAVINCI_LCD_CNTL_BASE; + da8xx_fb_reg_base = (struct da8xx_lcd_regs *)DA8XX_LCD_CNTL_BASE; + + /* Determine LCD IP Version */ + rev = lcdc_read(&da8xx_fb_reg_base->revid); + switch (rev) { + case 0x4C100102: + lcd_revision = LCD_VERSION_1; + break; + case 0x4F200800: + case 0x4F201000: + lcd_revision = LCD_VERSION_2; + break; + default: + printf("Unknown PID Reg value 0x%x, defaulting to LCD revision 1\n", + rev); + lcd_revision = LCD_VERSION_1; + break; + } - debug("Resolution: %dx%d %x\n", - gpanel.winSizeX, - gpanel.winSizeY, - lcd_cfg.bpp); + debug("rev: 0x%x Resolution: %dx%d %d\n", rev, + gpanel.winSizeX, + gpanel.winSizeY, + da8xx_lcd_cfg->bpp); size = sizeof(struct fb_info) + sizeof(struct da8xx_fb_par); da8xx_fb_info = malloc(size); @@ -722,13 +939,14 @@ void *video_hw_init(void) par = da8xx_fb_info->par; par->pxl_clk = lcd_panel->pxl_clk; - if (lcd_init(par, &lcd_cfg, lcd_panel) < 0) { + if (lcd_init(par, da8xx_lcd_cfg, lcd_panel) < 0) { printf("lcd_init failed\n"); goto err_release_fb; } /* allocate frame buffer */ - par->vram_size = lcd_panel->width * lcd_panel->height * lcd_cfg.bpp; + par->vram_size = lcd_panel->width * lcd_panel->height * + da8xx_lcd_cfg->bpp; par->vram_size = par->vram_size * LCD_NUM_BUFFERS / 8; par->vram_virt = malloc(par->vram_size); @@ -741,12 +959,13 @@ void *video_hw_init(void) printf("GLCD: malloc for frame buffer failed\n"); goto err_release_fb; } + gd->fb_base = (int)par->vram_virt; gpanel.frameAdrs = (unsigned int)par->vram_virt; da8xx_fb_info->screen_base = (char *) par->vram_virt; da8xx_fb_fix.smem_start = gpanel.frameAdrs; da8xx_fb_fix.smem_len = par->vram_size; - da8xx_fb_fix.line_length = (lcd_panel->width * lcd_cfg.bpp) / 8; + da8xx_fb_fix.line_length = (lcd_panel->width * da8xx_lcd_cfg->bpp) / 8; par->dma_start = par->vram_phys; par->dma_end = par->dma_start + lcd_panel->height * @@ -762,7 +981,7 @@ void *video_hw_init(void) par->p_palette_base = (unsigned int)par->v_palette_base; /* Initialize par */ - da8xx_fb_info->var.bits_per_pixel = lcd_cfg.bpp; + da8xx_fb_info->var.bits_per_pixel = da8xx_lcd_cfg->bpp; da8xx_fb_var.xres = lcd_panel->width; da8xx_fb_var.xres_virtual = lcd_panel->width; @@ -771,8 +990,8 @@ void *video_hw_init(void) da8xx_fb_var.yres_virtual = lcd_panel->height * LCD_NUM_BUFFERS; da8xx_fb_var.grayscale = - lcd_cfg.p_disp_panel->panel_shade == MONOCHROME ? 1 : 0; - da8xx_fb_var.bits_per_pixel = lcd_cfg.bpp; + da8xx_lcd_cfg->p_disp_panel->panel_shade == MONOCHROME ? 1 : 0; + da8xx_fb_var.bits_per_pixel = da8xx_lcd_cfg->bpp; da8xx_fb_var.hsync_len = lcd_panel->hsw; da8xx_fb_var.vsync_len = lcd_panel->vsw; @@ -787,8 +1006,11 @@ void *video_hw_init(void) /* Clear interrupt */ memset((void *)par->vram_virt, 0, par->vram_size); - lcd_disable_raster(); - lcdc_write(0xFFFF, &da8xx_fb_reg_base->stat); + lcd_disable_raster(NO_WAIT_FOR_FRAME_DONE); + if (lcd_revision == LCD_VERSION_1) + lcdc_write(0xFFFF, &da8xx_fb_reg_base->stat); + else + lcdc_write(0xFFFF, &da8xx_fb_reg_base->masked_stat); debug("Palette at 0x%x size %d\n", par->p_palette_base, par->palette_sz); lcdc_dma_start(); @@ -823,8 +1045,10 @@ void video_set_lut(unsigned int index, /* color number */ return; } -void da8xx_video_init(const struct da8xx_panel *panel, int bits_pixel) +void da8xx_video_init(const struct da8xx_panel *panel, + const struct lcd_ctrl_config *lcd_cfg, int bits_pixel) { lcd_panel = panel; + da8xx_lcd_cfg = lcd_cfg; bits_x_pixel = bits_pixel; } diff --git a/arch/arm/include/asm/arch-davinci/da8xx-fb.h b/drivers/video/da8xx-fb.h index c115034..6447a40 100644 --- a/arch/arm/include/asm/arch-davinci/da8xx-fb.h +++ b/drivers/video/da8xx-fb.h @@ -17,7 +17,8 @@ #define DA8XX_FB_H enum panel_type { - QVGA = 0 + QVGA = 0, + WVGA }; enum panel_shade { @@ -108,6 +109,8 @@ struct lcd_sync_arg { int pulse_width; }; -void da8xx_video_init(const struct da8xx_panel *panel, int bits_pixel); +void da8xx_video_init(const struct da8xx_panel *panel, + const struct lcd_ctrl_config *lcd_cfg, + int bits_pixel); #endif /* ifndef DA8XX_FB_H */ diff --git a/drivers/video/exynos_mipi_dsi_common.c b/drivers/video/exynos_mipi_dsi_common.c index 2cc847f..97e1248 100644 --- a/drivers/video/exynos_mipi_dsi_common.c +++ b/drivers/video/exynos_mipi_dsi_common.c @@ -50,7 +50,7 @@ static unsigned int dpll_table[15] = { }; static void exynos_mipi_dsi_long_data_wr(struct mipi_dsim_device *dsim, - unsigned int data0, unsigned int data1) + const unsigned char *data0, unsigned int data1) { unsigned int data_cnt = 0, payload = 0; @@ -62,42 +62,40 @@ static void exynos_mipi_dsi_long_data_wr(struct mipi_dsim_device *dsim, */ if ((data1 - data_cnt) < 4) { if ((data1 - data_cnt) == 3) { - payload = *(u8 *)(data0 + data_cnt) | - (*(u8 *)(data0 + (data_cnt + 1))) << 8 | - (*(u8 *)(data0 + (data_cnt + 2))) << 16; + payload = data0[data_cnt] | + data0[data_cnt + 1] << 8 | + data0[data_cnt + 2] << 16; debug("count = 3 payload = %x, %x %x %x\n", - payload, *(u8 *)(data0 + data_cnt), - *(u8 *)(data0 + (data_cnt + 1)), - *(u8 *)(data0 + (data_cnt + 2))); + payload, data0[data_cnt], + data0[data_cnt + 1], + data0[data_cnt + 2]); } else if ((data1 - data_cnt) == 2) { - payload = *(u8 *)(data0 + data_cnt) | - (*(u8 *)(data0 + (data_cnt + 1))) << 8; + payload = data0[data_cnt] | + data0[data_cnt + 1] << 8; debug("count = 2 payload = %x, %x %x\n", payload, - *(u8 *)(data0 + data_cnt), - *(u8 *)(data0 + (data_cnt + 1))); + data0[data_cnt], data0[data_cnt + 1]); } else if ((data1 - data_cnt) == 1) { - payload = *(u8 *)(data0 + data_cnt); + payload = data0[data_cnt]; } } else { /* send 4bytes per one time. */ - payload = *(u8 *)(data0 + data_cnt) | - (*(u8 *)(data0 + (data_cnt + 1))) << 8 | - (*(u8 *)(data0 + (data_cnt + 2))) << 16 | - (*(u8 *)(data0 + (data_cnt + 3))) << 24; + payload = data0[data_cnt] | + data0[data_cnt + 1] << 8 | + data0[data_cnt + 2] << 16 | + data0[data_cnt + 3] << 24; debug("count = 4 payload = %x, %x %x %x %x\n", payload, *(u8 *)(data0 + data_cnt), - *(u8 *)(data0 + (data_cnt + 1)), - *(u8 *)(data0 + (data_cnt + 2)), - *(u8 *)(data0 + (data_cnt + 3))); - + data0[data_cnt + 1], + data0[data_cnt + 2], + data0[data_cnt + 3]); } exynos_mipi_dsi_wr_tx_data(dsim, payload); } } int exynos_mipi_dsi_wr_data(struct mipi_dsim_device *dsim, unsigned int data_id, - unsigned int data0, unsigned int data1) + const unsigned char *data0, unsigned int data1) { unsigned int timeout = TRY_GET_FIFO_TIMEOUT; unsigned long delay_val, delay; @@ -136,8 +134,8 @@ int exynos_mipi_dsi_wr_data(struct mipi_dsim_device *dsim, unsigned int data_id, case MIPI_DSI_DCS_SHORT_WRITE_PARAM: case MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE: debug("data0 = %x data1 = %x\n", - data0, data1); - exynos_mipi_dsi_wr_tx_header(dsim, data_id, data0, data1); + data0[0], data0[1]); + exynos_mipi_dsi_wr_tx_header(dsim, data_id, data0[0], data0[1]); if (check_rx_ack) { /* process response func should be implemented */ return 0; @@ -150,7 +148,7 @@ int exynos_mipi_dsi_wr_data(struct mipi_dsim_device *dsim, unsigned int data_id, case MIPI_DSI_COLOR_MODE_ON: case MIPI_DSI_SHUTDOWN_PERIPHERAL: case MIPI_DSI_TURN_ON_PERIPHERAL: - exynos_mipi_dsi_wr_tx_header(dsim, data_id, data0, data1); + exynos_mipi_dsi_wr_tx_header(dsim, data_id, data0[0], data0[1]); if (check_rx_ack) { /* process response func should be implemented. */ return 0; @@ -172,7 +170,7 @@ int exynos_mipi_dsi_wr_data(struct mipi_dsim_device *dsim, unsigned int data_id, case MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM: case MIPI_DSI_DCS_READ: exynos_mipi_dsi_clear_all_interrupt(dsim); - exynos_mipi_dsi_wr_tx_header(dsim, data_id, data0, data1); + exynos_mipi_dsi_wr_tx_header(dsim, data_id, data0[0], data0[1]); /* process response func should be implemented. */ return 0; @@ -183,21 +181,19 @@ int exynos_mipi_dsi_wr_data(struct mipi_dsim_device *dsim, unsigned int data_id, case MIPI_DSI_GENERIC_LONG_WRITE: case MIPI_DSI_DCS_LONG_WRITE: { - unsigned int data_cnt = 0, payload = 0; + unsigned int payload = 0; /* if data count is less then 4, then send 3bytes data. */ if (data1 < 4) { - payload = *(u8 *)(data0) | - *(u8 *)(data0 + 1) << 8 | - *(u8 *)(data0 + 2) << 16; + payload = data0[0] | + data0[1] << 8 | + data0[2] << 16; exynos_mipi_dsi_wr_tx_data(dsim, payload); debug("count = %d payload = %x,%x %x %x\n", - data1, payload, - *(u8 *)(data0 + data_cnt), - *(u8 *)(data0 + (data_cnt + 1)), - *(u8 *)(data0 + (data_cnt + 2))); + data1, payload, data0[0], + data0[1], data0[2]); } else { /* in case that data count is more then 4 */ exynos_mipi_dsi_long_data_wr(dsim, data0, data1); diff --git a/drivers/video/exynos_mipi_dsi_common.h b/drivers/video/exynos_mipi_dsi_common.h index 318c7ec..ef6510a 100644 --- a/drivers/video/exynos_mipi_dsi_common.h +++ b/drivers/video/exynos_mipi_dsi_common.h @@ -13,7 +13,7 @@ #define _EXYNOS_MIPI_DSI_COMMON_H int exynos_mipi_dsi_wr_data(struct mipi_dsim_device *dsim, unsigned int data_id, - unsigned int data0, unsigned int data1); + const unsigned char *data0, unsigned int data1); int exynos_mipi_dsi_pll_on(struct mipi_dsim_device *dsim, unsigned int enable); unsigned long exynos_mipi_dsi_change_pll(struct mipi_dsim_device *dsim, unsigned int pre_divider, unsigned int main_divider, diff --git a/drivers/video/exynos_mipi_dsi_lowlevel.c b/drivers/video/exynos_mipi_dsi_lowlevel.c index b47eee4..1313bce 100644 --- a/drivers/video/exynos_mipi_dsi_lowlevel.c +++ b/drivers/video/exynos_mipi_dsi_lowlevel.c @@ -600,7 +600,7 @@ unsigned int exynos_mipi_dsi_get_fifo_state(struct mipi_dsim_device *dsim) } void exynos_mipi_dsi_wr_tx_header(struct mipi_dsim_device *dsim, - unsigned int di, unsigned int data0, unsigned int data1) + unsigned int di, const unsigned char data0, const unsigned char data1) { struct exynos_mipi_dsim *mipi_dsim = (struct exynos_mipi_dsim *)samsung_get_base_mipi_dsim(); diff --git a/drivers/video/exynos_mipi_dsi_lowlevel.h b/drivers/video/exynos_mipi_dsi_lowlevel.h index 8a45954..59f6ce0 100644 --- a/drivers/video/exynos_mipi_dsi_lowlevel.h +++ b/drivers/video/exynos_mipi_dsi_lowlevel.h @@ -91,7 +91,7 @@ unsigned int _exynos_mipi_dsi_get_frame_done_status(struct mipi_dsim_device *dsim); void _exynos_mipi_dsi_clear_frame_done(struct mipi_dsim_device *dsim); void exynos_mipi_dsi_wr_tx_header(struct mipi_dsim_device *dsim, - unsigned int di, unsigned int data0, unsigned int data1); + unsigned int di, const unsigned char data0, const unsigned char data1); void exynos_mipi_dsi_wr_tx_data(struct mipi_dsim_device *dsim, unsigned int tx_data); diff --git a/drivers/video/formike.c b/drivers/video/formike.c new file mode 100644 index 0000000..b9b6822 --- /dev/null +++ b/drivers/video/formike.c @@ -0,0 +1,511 @@ +/* + * LCD: Formike, TFT 4.3", 480x800, RGB24, KWH043ST20-F01, DriverIC NT35510-16 + * LCD initialization via SPI + * + * SPDX-License-Identifier: GPL-2.0 + * Based on: + * + */ +#include <common.h> +#include <errno.h> +#include <spi.h> + +#define TAG_READ 0x80 +#define TAG_WRITE 0x00 + +#define TAG_DATA 0x40 +#define TAG_COMMAND 0x00 + +#define TAG_ADDR_H 0x20 +#define TAG_ADDR_L 0x00 + +static int spi_write_tag_val(struct spi_slave *spi, unsigned char tag, + unsigned char val) +{ + unsigned long flags = SPI_XFER_BEGIN; + u8 buf[2]; + int ret; + + buf[0] = tag; + buf[1] = val; + flags |= SPI_XFER_END; + + ret = spi_xfer(spi, 16, buf, NULL, flags); +#ifdef KWH043ST20_F01_SPI_DEBUG + printf("spi_write_tag_val: tag=%02X, val=%02X ret: %d\n", + tag, val, ret); +#endif /* KWH043ST20_F01_SPI_DEBUG */ + if (ret) + debug("%s: Failed to send: %d\n", __func__, ret); + + return ret; +} + +static void spi_write_dat(struct spi_slave *spi, unsigned int val) +{ + spi_write_tag_val(spi, TAG_WRITE|TAG_DATA, val); +} + +static void spi_write_com(struct spi_slave *spi, unsigned int addr) +{ + spi_write_tag_val(spi, TAG_WRITE|TAG_COMMAND|TAG_ADDR_H, + (addr & 0xff00) >> 8); + spi_write_tag_val(spi, TAG_WRITE|TAG_COMMAND|TAG_ADDR_L, + (addr & 0x00ff) >> 0); +} + +int kwh043st20_f01_spi_startup(unsigned int bus, unsigned int cs, + unsigned int max_hz, unsigned int spi_mode) +{ + struct spi_slave *spi; + int ret; + + spi = spi_setup_slave(bus, cs, max_hz, spi_mode); + if (!spi) { + debug("%s: Failed to set up slave\n", __func__); + return -1; + } + + ret = spi_claim_bus(spi); + if (ret) { + debug("%s: Failed to claim SPI bus: %d\n", __func__, ret); + goto err_claim_bus; + } + + + /* LV2 Page 1 enable */ + spi_write_com(spi, 0xF000); spi_write_dat(spi, 0x55); + spi_write_com(spi, 0xF001); spi_write_dat(spi, 0xAA); + spi_write_com(spi, 0xF002); spi_write_dat(spi, 0x52); + spi_write_com(spi, 0xF003); spi_write_dat(spi, 0x08); + spi_write_com(spi, 0xF004); spi_write_dat(spi, 0x01); + + /* AVDD Set AVDD 5.2V */ + spi_write_com(spi, 0xB000); spi_write_dat(spi, 0x0D); + spi_write_com(spi, 0xB001); spi_write_dat(spi, 0x0D); + spi_write_com(spi, 0xB002); spi_write_dat(spi, 0x0D); + + /* AVDD ratio */ + spi_write_com(spi, 0xB600); spi_write_dat(spi, 0x34); + spi_write_com(spi, 0xB601); spi_write_dat(spi, 0x34); + spi_write_com(spi, 0xB602); spi_write_dat(spi, 0x34); + + /* AVEE -5.2V */ + spi_write_com(spi, 0xB100); spi_write_dat(spi, 0x0D); + spi_write_com(spi, 0xB101); spi_write_dat(spi, 0x0D); + spi_write_com(spi, 0xB102); spi_write_dat(spi, 0x0D); + + /* AVEE ratio */ + spi_write_com(spi, 0xB700); spi_write_dat(spi, 0x35); + spi_write_com(spi, 0xB701); spi_write_dat(spi, 0x35); + spi_write_com(spi, 0xB702); spi_write_dat(spi, 0x35); + + /* VCL -2.5V */ + spi_write_com(spi, 0xB200); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xB201); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xB202); spi_write_dat(spi, 0x00); + + /* VCL ratio */ + spi_write_com(spi, 0xB800); spi_write_dat(spi, 0x24); + spi_write_com(spi, 0xB801); spi_write_dat(spi, 0x24); + spi_write_com(spi, 0xB802); spi_write_dat(spi, 0x24); + + /* VGH 15V */ + spi_write_com(spi, 0xBF00); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xB300); spi_write_dat(spi, 0x08); + spi_write_com(spi, 0xB301); spi_write_dat(spi, 0x08); + spi_write_com(spi, 0xB302); spi_write_dat(spi, 0x08); + + /* VGH ratio */ + spi_write_com(spi, 0xB900); spi_write_dat(spi, 0x34); + spi_write_com(spi, 0xB901); spi_write_dat(spi, 0x34); + spi_write_com(spi, 0xB902); spi_write_dat(spi, 0x34); + + /* VGLX ratio */ + spi_write_com(spi, 0xBA00); spi_write_dat(spi, 0x24); + spi_write_com(spi, 0xBA01); spi_write_dat(spi, 0x24); + spi_write_com(spi, 0xBA02); spi_write_dat(spi, 0x24); + + /* VGMP/VGSP 4.7V/0V */ + spi_write_com(spi, 0xBC00); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xBC01); spi_write_dat(spi, 0x88); + spi_write_com(spi, 0xBC02); spi_write_dat(spi, 0x00); + + /* VGMN/VGSN -4.7V/0V */ + spi_write_com(spi, 0xBD00); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xBD01); spi_write_dat(spi, 0x88); + spi_write_com(spi, 0xBD02); spi_write_dat(spi, 0x00); + + /* VCOM 1.525V */ + spi_write_com(spi, 0xBE00); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xBE01); spi_write_dat(spi, 0x7A); + + /* Gamma Setting */ + spi_write_com(spi, 0xD100); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD101); spi_write_dat(spi, 0x05); + spi_write_com(spi, 0xD102); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD103); spi_write_dat(spi, 0x15); + spi_write_com(spi, 0xD104); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD105); spi_write_dat(spi, 0x30); + spi_write_com(spi, 0xD106); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD107); spi_write_dat(spi, 0x47); + spi_write_com(spi, 0xD108); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD109); spi_write_dat(spi, 0x5B); + spi_write_com(spi, 0xD10A); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD10B); spi_write_dat(spi, 0x7D); + spi_write_com(spi, 0xD10C); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD10D); spi_write_dat(spi, 0x9D); + spi_write_com(spi, 0xD10E); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD10F); spi_write_dat(spi, 0xCC); + spi_write_com(spi, 0xD110); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD111); spi_write_dat(spi, 0xF3); + spi_write_com(spi, 0xD112); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD113); spi_write_dat(spi, 0x32); + spi_write_com(spi, 0xD114); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD115); spi_write_dat(spi, 0x63); + spi_write_com(spi, 0xD116); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD117); spi_write_dat(spi, 0xB1); + spi_write_com(spi, 0xD118); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD119); spi_write_dat(spi, 0xF0); + spi_write_com(spi, 0xD11A); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD11B); spi_write_dat(spi, 0xF2); + spi_write_com(spi, 0xD11C); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD11D); spi_write_dat(spi, 0x2A); + spi_write_com(spi, 0xD11E); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD11F); spi_write_dat(spi, 0x67); + spi_write_com(spi, 0xD120); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD121); spi_write_dat(spi, 0x90); + spi_write_com(spi, 0xD122); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD123); spi_write_dat(spi, 0xCB); + spi_write_com(spi, 0xD124); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD125); spi_write_dat(spi, 0xF2); + spi_write_com(spi, 0xD126); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD127); spi_write_dat(spi, 0x2A); + spi_write_com(spi, 0xD128); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD129); spi_write_dat(spi, 0x51); + spi_write_com(spi, 0xD12A); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD12B); spi_write_dat(spi, 0x80); + spi_write_com(spi, 0xD12C); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD12D); spi_write_dat(spi, 0x9F); + spi_write_com(spi, 0xD12E); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD12F); spi_write_dat(spi, 0xBE); + spi_write_com(spi, 0xD130); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD131); spi_write_dat(spi, 0xF9); + spi_write_com(spi, 0xD132); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD133); spi_write_dat(spi, 0xFF); + + spi_write_com(spi, 0xD200); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD201); spi_write_dat(spi, 0x05); + spi_write_com(spi, 0xD202); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD203); spi_write_dat(spi, 0x15); + spi_write_com(spi, 0xD204); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD205); spi_write_dat(spi, 0x30); + spi_write_com(spi, 0xD206); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD207); spi_write_dat(spi, 0x47); + spi_write_com(spi, 0xD208); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD209); spi_write_dat(spi, 0x5B); + spi_write_com(spi, 0xD20A); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD20B); spi_write_dat(spi, 0x7D); + spi_write_com(spi, 0xD20C); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD20D); spi_write_dat(spi, 0x9D); + spi_write_com(spi, 0xD20E); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD20F); spi_write_dat(spi, 0xCC); + spi_write_com(spi, 0xD210); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD211); spi_write_dat(spi, 0xF3); + spi_write_com(spi, 0xD212); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD213); spi_write_dat(spi, 0x32); + spi_write_com(spi, 0xD214); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD215); spi_write_dat(spi, 0x63); + spi_write_com(spi, 0xD216); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD217); spi_write_dat(spi, 0xB1); + spi_write_com(spi, 0xD218); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD219); spi_write_dat(spi, 0xF0); + spi_write_com(spi, 0xD21A); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD21B); spi_write_dat(spi, 0xF2); + spi_write_com(spi, 0xD21C); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD21D); spi_write_dat(spi, 0x2A); + spi_write_com(spi, 0xD21E); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD21F); spi_write_dat(spi, 0x67); + spi_write_com(spi, 0xD220); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD221); spi_write_dat(spi, 0x90); + spi_write_com(spi, 0xD222); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD223); spi_write_dat(spi, 0xCB); + spi_write_com(spi, 0xD224); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD225); spi_write_dat(spi, 0xF2); + spi_write_com(spi, 0xD226); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD227); spi_write_dat(spi, 0x2A); + spi_write_com(spi, 0xD228); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD229); spi_write_dat(spi, 0x51); + spi_write_com(spi, 0xD22A); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD22B); spi_write_dat(spi, 0x80); + spi_write_com(spi, 0xD22C); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD22D); spi_write_dat(spi, 0x9F); + spi_write_com(spi, 0xD22E); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD22F); spi_write_dat(spi, 0xBE); + spi_write_com(spi, 0xD230); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD231); spi_write_dat(spi, 0xF9); + spi_write_com(spi, 0xD232); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD233); spi_write_dat(spi, 0xFF); + + spi_write_com(spi, 0xD300); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD301); spi_write_dat(spi, 0x05); + spi_write_com(spi, 0xD302); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD303); spi_write_dat(spi, 0x15); + spi_write_com(spi, 0xD304); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD305); spi_write_dat(spi, 0x30); + spi_write_com(spi, 0xD306); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD307); spi_write_dat(spi, 0x47); + spi_write_com(spi, 0xD308); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD309); spi_write_dat(spi, 0x5B); + spi_write_com(spi, 0xD30A); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD30B); spi_write_dat(spi, 0x7D); + spi_write_com(spi, 0xD30C); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD30D); spi_write_dat(spi, 0x9D); + spi_write_com(spi, 0xD30E); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD30F); spi_write_dat(spi, 0xCC); + spi_write_com(spi, 0xD310); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD311); spi_write_dat(spi, 0xF3); + spi_write_com(spi, 0xD312); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD313); spi_write_dat(spi, 0x32); + spi_write_com(spi, 0xD314); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD315); spi_write_dat(spi, 0x63); + spi_write_com(spi, 0xD316); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD317); spi_write_dat(spi, 0xB1); + spi_write_com(spi, 0xD318); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD319); spi_write_dat(spi, 0xF0); + spi_write_com(spi, 0xD31A); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD31B); spi_write_dat(spi, 0xF2); + spi_write_com(spi, 0xD31C); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD31D); spi_write_dat(spi, 0x2A); + spi_write_com(spi, 0xD31E); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD31F); spi_write_dat(spi, 0x67); + spi_write_com(spi, 0xD320); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD321); spi_write_dat(spi, 0x90); + spi_write_com(spi, 0xD322); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD323); spi_write_dat(spi, 0xCB); + spi_write_com(spi, 0xD324); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD325); spi_write_dat(spi, 0xF2); + spi_write_com(spi, 0xD326); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD327); spi_write_dat(spi, 0x2A); + spi_write_com(spi, 0xD328); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD329); spi_write_dat(spi, 0x51); + spi_write_com(spi, 0xD32A); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD32B); spi_write_dat(spi, 0x80); + spi_write_com(spi, 0xD32C); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD32D); spi_write_dat(spi, 0x9F); + spi_write_com(spi, 0xD32E); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD32F); spi_write_dat(spi, 0xBE); + spi_write_com(spi, 0xD330); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD331); spi_write_dat(spi, 0xF9); + spi_write_com(spi, 0xD332); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD333); spi_write_dat(spi, 0xFF); + + spi_write_com(spi, 0xD400); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD401); spi_write_dat(spi, 0x05); + spi_write_com(spi, 0xD402); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD403); spi_write_dat(spi, 0x15); + spi_write_com(spi, 0xD404); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD405); spi_write_dat(spi, 0x30); + spi_write_com(spi, 0xD406); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD407); spi_write_dat(spi, 0x47); + spi_write_com(spi, 0xD408); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD409); spi_write_dat(spi, 0x5B); + spi_write_com(spi, 0xD40A); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD40B); spi_write_dat(spi, 0x7D); + spi_write_com(spi, 0xD40C); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD40D); spi_write_dat(spi, 0x9D); + spi_write_com(spi, 0xD40E); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD40F); spi_write_dat(spi, 0xCC); + spi_write_com(spi, 0xD410); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD411); spi_write_dat(spi, 0xF3); + spi_write_com(spi, 0xD412); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD413); spi_write_dat(spi, 0x32); + spi_write_com(spi, 0xD414); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD415); spi_write_dat(spi, 0x63); + spi_write_com(spi, 0xD416); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD417); spi_write_dat(spi, 0xB1); + spi_write_com(spi, 0xD418); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD419); spi_write_dat(spi, 0xF0); + spi_write_com(spi, 0xD41A); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD41B); spi_write_dat(spi, 0xF2); + spi_write_com(spi, 0xD41C); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD41D); spi_write_dat(spi, 0x2A); + spi_write_com(spi, 0xD41E); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD41F); spi_write_dat(spi, 0x67); + spi_write_com(spi, 0xD420); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD421); spi_write_dat(spi, 0x90); + spi_write_com(spi, 0xD422); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD423); spi_write_dat(spi, 0xCB); + spi_write_com(spi, 0xD424); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD425); spi_write_dat(spi, 0xF2); + spi_write_com(spi, 0xD426); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD427); spi_write_dat(spi, 0x2A); + spi_write_com(spi, 0xD428); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD429); spi_write_dat(spi, 0x51); + spi_write_com(spi, 0xD42A); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD42B); spi_write_dat(spi, 0x80); + spi_write_com(spi, 0xD42C); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD42D); spi_write_dat(spi, 0x9F); + spi_write_com(spi, 0xD42E); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD42F); spi_write_dat(spi, 0xBE); + spi_write_com(spi, 0xD430); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD431); spi_write_dat(spi, 0xF9); + spi_write_com(spi, 0xD432); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD433); spi_write_dat(spi, 0xFF); + + spi_write_com(spi, 0xD500); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD501); spi_write_dat(spi, 0x05); + spi_write_com(spi, 0xD502); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD503); spi_write_dat(spi, 0x15); + spi_write_com(spi, 0xD504); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD505); spi_write_dat(spi, 0x30); + spi_write_com(spi, 0xD506); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD507); spi_write_dat(spi, 0x47); + spi_write_com(spi, 0xD508); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD509); spi_write_dat(spi, 0x5B); + spi_write_com(spi, 0xD50A); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD50B); spi_write_dat(spi, 0x7D); + spi_write_com(spi, 0xD50C); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD50D); spi_write_dat(spi, 0x9D); + spi_write_com(spi, 0xD50E); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD50F); spi_write_dat(spi, 0xCC); + spi_write_com(spi, 0xD510); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD511); spi_write_dat(spi, 0xF3); + spi_write_com(spi, 0xD512); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD513); spi_write_dat(spi, 0x32); + spi_write_com(spi, 0xD514); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD515); spi_write_dat(spi, 0x63); + spi_write_com(spi, 0xD516); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD517); spi_write_dat(spi, 0xB1); + spi_write_com(spi, 0xD518); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD519); spi_write_dat(spi, 0xF0); + spi_write_com(spi, 0xD51A); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD51B); spi_write_dat(spi, 0xF2); + spi_write_com(spi, 0xD51C); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD51D); spi_write_dat(spi, 0x2A); + spi_write_com(spi, 0xD51E); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD51F); spi_write_dat(spi, 0x67); + spi_write_com(spi, 0xD520); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD521); spi_write_dat(spi, 0x90); + spi_write_com(spi, 0xD522); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD523); spi_write_dat(spi, 0xCB); + spi_write_com(spi, 0xD524); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD525); spi_write_dat(spi, 0xF2); + spi_write_com(spi, 0xD526); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD527); spi_write_dat(spi, 0x2A); + spi_write_com(spi, 0xD528); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD529); spi_write_dat(spi, 0x51); + spi_write_com(spi, 0xD52A); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD52B); spi_write_dat(spi, 0x80); + spi_write_com(spi, 0xD52C); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD52D); spi_write_dat(spi, 0x9F); + spi_write_com(spi, 0xD52E); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD52F); spi_write_dat(spi, 0xBE); + spi_write_com(spi, 0xD530); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD531); spi_write_dat(spi, 0xF9); + spi_write_com(spi, 0xD532); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD533); spi_write_dat(spi, 0xFF); + + spi_write_com(spi, 0xD600); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD601); spi_write_dat(spi, 0x05); + spi_write_com(spi, 0xD602); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD603); spi_write_dat(spi, 0x15); + spi_write_com(spi, 0xD604); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD605); spi_write_dat(spi, 0x30); + spi_write_com(spi, 0xD606); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD607); spi_write_dat(spi, 0x47); + spi_write_com(spi, 0xD608); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD609); spi_write_dat(spi, 0x5B); + spi_write_com(spi, 0xD60A); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD60B); spi_write_dat(spi, 0x7D); + spi_write_com(spi, 0xD60C); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD60D); spi_write_dat(spi, 0x9D); + spi_write_com(spi, 0xD60E); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD60F); spi_write_dat(spi, 0xCC); + spi_write_com(spi, 0xD610); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xD611); spi_write_dat(spi, 0xF3); + spi_write_com(spi, 0xD612); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD613); spi_write_dat(spi, 0x32); + spi_write_com(spi, 0xD614); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD615); spi_write_dat(spi, 0x63); + spi_write_com(spi, 0xD616); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD617); spi_write_dat(spi, 0xB1); + spi_write_com(spi, 0xD618); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD619); spi_write_dat(spi, 0xF0); + spi_write_com(spi, 0xD61A); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xD61B); spi_write_dat(spi, 0xF2); + spi_write_com(spi, 0xD61C); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD61D); spi_write_dat(spi, 0x2A); + spi_write_com(spi, 0xD61E); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD61F); spi_write_dat(spi, 0x67); + spi_write_com(spi, 0xD620); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD621); spi_write_dat(spi, 0x90); + spi_write_com(spi, 0xD622); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD623); spi_write_dat(spi, 0xCB); + spi_write_com(spi, 0xD624); spi_write_dat(spi, 0x02); + spi_write_com(spi, 0xD625); spi_write_dat(spi, 0xF2); + spi_write_com(spi, 0xD626); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD627); spi_write_dat(spi, 0x2A); + spi_write_com(spi, 0xD628); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD629); spi_write_dat(spi, 0x51); + spi_write_com(spi, 0xD62A); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD62B); spi_write_dat(spi, 0x80); + spi_write_com(spi, 0xD62C); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD62D); spi_write_dat(spi, 0x9F); + spi_write_com(spi, 0xD62E); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD62F); spi_write_dat(spi, 0xBE); + spi_write_com(spi, 0xD630); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD631); spi_write_dat(spi, 0xF9); + spi_write_com(spi, 0xD632); spi_write_dat(spi, 0x03); + spi_write_com(spi, 0xD633); spi_write_dat(spi, 0xFF); + + /* LV2 Page 0 enable */ + spi_write_com(spi, 0xF000); spi_write_dat(spi, 0x55); + spi_write_com(spi, 0xF001); spi_write_dat(spi, 0xAA); + spi_write_com(spi, 0xF002); spi_write_dat(spi, 0x52); + spi_write_com(spi, 0xF003); spi_write_dat(spi, 0x08); + spi_write_com(spi, 0xF004); spi_write_dat(spi, 0x00); + + /* Display control */ + spi_write_com(spi, 0xB100); spi_write_dat(spi, 0xFC); + spi_write_com(spi, 0xB101); spi_write_dat(spi, 0x00); + + /* Source hold time */ + spi_write_com(spi, 0xB600); spi_write_dat(spi, 0x05); + + /* Gate EQ control */ + spi_write_com(spi, 0xB700); spi_write_dat(spi, 0x70); + spi_write_com(spi, 0xB701); spi_write_dat(spi, 0x70); + + /* Source EQ control (Mode 2) */ + spi_write_com(spi, 0xB800); spi_write_dat(spi, 0x01); + spi_write_com(spi, 0xB801); spi_write_dat(spi, 0x05); + spi_write_com(spi, 0xB802); spi_write_dat(spi, 0x05); + spi_write_com(spi, 0xB803); spi_write_dat(spi, 0x05); + + /* Inversion mode (Column) */ + spi_write_com(spi, 0xBC00); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xBC01); spi_write_dat(spi, 0x00); + spi_write_com(spi, 0xBC02); spi_write_dat(spi, 0x00); + + /* Timing control 8phase dual side/4H/4delay/RST_EN */ + spi_write_com(spi, 0xC900); spi_write_dat(spi, 0xD0); + spi_write_com(spi, 0xC901); spi_write_dat(spi, 0x82); + spi_write_com(spi, 0xC902); spi_write_dat(spi, 0x50); + spi_write_com(spi, 0xC903); spi_write_dat(spi, 0x50); + spi_write_com(spi, 0xC904); spi_write_dat(spi, 0x50); + + spi_write_com(spi, 0x3A00); spi_write_dat(spi, 0x55); + mdelay(120); + spi_write_com(spi, 0x1100); + mdelay(120); + spi_write_com(spi, 0x2900); + mdelay(120); + /* spi_write_com(spi, 0x2100); spi_write_dat(spi, 0x00); */ + spi_write_com(spi, 0x2C00); + + return 0; +err_claim_bus: + spi_free_slave(spi); + return -1; +} diff --git a/drivers/video/l5f31188.c b/drivers/video/l5f31188.c new file mode 100644 index 0000000..3312dcf --- /dev/null +++ b/drivers/video/l5f31188.c @@ -0,0 +1,192 @@ +/* + * Copyright (c) 2013 Samsung Electronics Co., Ltd. All rights reserved. + * Hyungwon Hwang <human.hwang@samsung.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/mipi_dsim.h> + +#define SCAN_FROM_LEFT_TO_RIGHT 0 +#define SCAN_FROM_RIGHT_TO_LEFT 1 +#define SCAN_FROM_TOP_TO_BOTTOM 0 +#define SCAN_FROM_BOTTOM_TO_TOP 1 + +static void l5f31188_sleep_in(struct mipi_dsim_device *dev, + struct mipi_dsim_master_ops *ops) +{ + ops->cmd_write(dev, MIPI_DSI_DCS_SHORT_WRITE, 0x10, 0x00); +} + +static void l5f31188_sleep_out(struct mipi_dsim_device *dev, + struct mipi_dsim_master_ops *ops) +{ + ops->cmd_write(dev, MIPI_DSI_DCS_SHORT_WRITE, 0x11, 0x00); +} + +static void l5f31188_set_gamma(struct mipi_dsim_device *dev, + struct mipi_dsim_master_ops *ops) +{ + ops->cmd_write(dev, MIPI_DSI_DCS_SHORT_WRITE, 0x26, 0x00); +} + +static void l5f31188_display_off(struct mipi_dsim_device *dev, + struct mipi_dsim_master_ops *ops) +{ + ops->cmd_write(dev, MIPI_DSI_DCS_SHORT_WRITE, 0x28, 0x00); +} + +static void l5f31188_display_on(struct mipi_dsim_device *dev, + struct mipi_dsim_master_ops *ops) +{ + ops->cmd_write(dev, MIPI_DSI_DCS_SHORT_WRITE, 0x29, 0x00); +} + +static void l5f31188_ctl_memory_access(struct mipi_dsim_device *dev, + struct mipi_dsim_master_ops *ops, + int h_direction, int v_direction) +{ + ops->cmd_write(dev, MIPI_DSI_DCS_SHORT_WRITE_PARAM, 0x36, + (((h_direction & 0x1) << 1) | (v_direction & 0x1))); +} + +static void l5f31188_set_pixel_format(struct mipi_dsim_device *dev, + struct mipi_dsim_master_ops *ops) +{ + ops->cmd_write(dev, MIPI_DSI_DCS_SHORT_WRITE_PARAM, 0x3A, 0x70); +} + +static void l5f31188_write_disbv(struct mipi_dsim_device *dev, + struct mipi_dsim_master_ops *ops, unsigned int brightness) +{ + ops->cmd_write(dev, MIPI_DSI_DCS_SHORT_WRITE_PARAM, 0x51, brightness); +} + +static void l5f31188_write_ctrld(struct mipi_dsim_device *dev, + struct mipi_dsim_master_ops *ops) +{ + ops->cmd_write(dev, MIPI_DSI_DCS_SHORT_WRITE_PARAM, 0x53, 0x2C); +} + +static void l5f31188_write_cabc(struct mipi_dsim_device *dev, + struct mipi_dsim_master_ops *ops, + unsigned int wm_mode) +{ + ops->cmd_write(dev, MIPI_DSI_DCS_SHORT_WRITE_PARAM, 0x55, wm_mode); +} + +static void l5f31188_write_cabcmb(struct mipi_dsim_device *dev, + struct mipi_dsim_master_ops *ops, unsigned int min_brightness) +{ + ops->cmd_write(dev, MIPI_DSI_DCS_SHORT_WRITE_PARAM, 0x5E, + min_brightness); +} + +static void l5f31188_set_extension(struct mipi_dsim_device *dev, + struct mipi_dsim_master_ops *ops) +{ + const unsigned char data_to_send[] = { + 0xB9, 0xFF, 0x83, 0x94 + }; + + ops->cmd_write(dev, MIPI_DSI_DCS_LONG_WRITE, + (unsigned int)data_to_send, ARRAY_SIZE(data_to_send)); +} + +static void l5f31188_set_dgc_lut(struct mipi_dsim_device *dev, + struct mipi_dsim_master_ops *ops) +{ + const unsigned char data_to_send[] = { + 0xC1, 0x01, 0x00, 0x04, 0x0E, 0x18, 0x1E, 0x26, + 0x2F, 0x36, 0x3E, 0x47, 0x4E, 0x56, 0x5D, 0x65, + 0x6D, 0x75, 0x7D, 0x84, 0x8C, 0x94, 0x9C, 0xA4, + 0xAD, 0xB5, 0xBD, 0xC5, 0xCC, 0xD4, 0xDE, 0xE5, + 0xEE, 0xF7, 0xFF, 0x3F, 0x9A, 0xCE, 0xD4, 0x21, + 0xA1, 0x26, 0x54, 0x00, 0x00, 0x04, 0x0E, 0x19, + 0x1F, 0x27, 0x30, 0x37, 0x40, 0x48, 0x50, 0x58, + 0x60, 0x67, 0x6F, 0x77, 0x7F, 0x87, 0x8F, 0x97, + 0x9F, 0xA7, 0xB0, 0xB8, 0xC0, 0xC8, 0xCE, 0xD8, + 0xE0, 0xE7, 0xF0, 0xF7, 0xFF, 0x3C, 0xEB, 0xFD, + 0x2F, 0x66, 0xA8, 0x2C, 0x46, 0x00, 0x00, 0x04, + 0x0E, 0x18, 0x1E, 0x26, 0x30, 0x38, 0x41, 0x4A, + 0x52, 0x5A, 0x62, 0x6B, 0x73, 0x7B, 0x83, 0x8C, + 0x94, 0x9C, 0xA5, 0xAD, 0xB6, 0xBD, 0xC5, 0xCC, + 0xD4, 0xDD, 0xE3, 0xEB, 0xF2, 0xF9, 0xFF, 0x3F, + 0xA4, 0x8A, 0x8F, 0xC7, 0x33, 0xF5, 0xE9, 0x00 + }; + ops->cmd_write(dev, MIPI_DSI_DCS_LONG_WRITE, + (unsigned int)data_to_send, ARRAY_SIZE(data_to_send)); +} + +static void l5f31188_set_tcon(struct mipi_dsim_device *dev, + struct mipi_dsim_master_ops *ops) +{ + const unsigned char data_to_send[] = { + 0xC7, 0x00, 0x20 + }; + ops->cmd_write(dev, MIPI_DSI_DCS_LONG_WRITE, + (unsigned int)data_to_send, ARRAY_SIZE(data_to_send)); +} + +static void l5f31188_set_ptba(struct mipi_dsim_device *dev, + struct mipi_dsim_master_ops *ops) +{ + const unsigned char data_to_send[] = { + 0xBF, 0x06, 0x10 + }; + ops->cmd_write(dev, MIPI_DSI_DCS_LONG_WRITE, + (unsigned int)data_to_send, ARRAY_SIZE(data_to_send)); +} + +static void l5f31188_set_eco(struct mipi_dsim_device *dev, + struct mipi_dsim_master_ops *ops) +{ + ops->cmd_write(dev, MIPI_DSI_DCS_SHORT_WRITE_PARAM, 0xC6, 0x0C); +} + +static int l5f31188_panel_init(struct mipi_dsim_device *dev) +{ + struct mipi_dsim_master_ops *ops = dev->master_ops; + + l5f31188_set_extension(dev, ops); + l5f31188_set_dgc_lut(dev, ops); + + l5f31188_set_eco(dev, ops); + l5f31188_set_tcon(dev, ops); + l5f31188_set_ptba(dev, ops); + l5f31188_set_gamma(dev, ops); + l5f31188_ctl_memory_access(dev, ops, + SCAN_FROM_LEFT_TO_RIGHT, SCAN_FROM_TOP_TO_BOTTOM); + l5f31188_set_pixel_format(dev, ops); + l5f31188_write_disbv(dev, ops, 0xFF); + l5f31188_write_ctrld(dev, ops); + l5f31188_write_cabc(dev, ops, 0x0); + l5f31188_write_cabcmb(dev, ops, 0x0); + + l5f31188_sleep_out(dev, ops); + + /* 120 msec */ + udelay(120 * 1000); + + return 0; +} + +static void l5f31188_display_enable(struct mipi_dsim_device *dev) +{ + struct mipi_dsim_master_ops *ops = dev->master_ops; + l5f31188_display_on(dev, ops); +} + +static struct mipi_dsim_lcd_driver l5f31188_dsim_ddi_driver = { + .name = "l5f31188", + .id = -1, + + .mipi_panel_init = l5f31188_panel_init, + .mipi_display_on = l5f31188_display_enable, +}; + +void l5f31188_init(void) +{ + exynos_mipi_dsi_register_lcd_driver(&l5f31188_dsim_ddi_driver); +} diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c index 6bf9fc5..03b0f88 100644 --- a/drivers/video/mxsfb.c +++ b/drivers/video/mxsfb.c @@ -15,11 +15,25 @@ #include <asm/errno.h> #include <asm/io.h> +#include <asm/imx-common/dma.h> + #include "videomodes.h" #define PS2KHZ(ps) (1000000000UL / (ps)) static GraphicDevice panel; +struct mxs_dma_desc desc; + +/** + * mxsfb_system_setup() - Fine-tune LCDIF configuration + * + * This function is used to adjust the LCDIF configuration. This is usually + * needed when driving the controller in System-Mode to operate an 8080 or + * 6800 connected SmartLCD. + */ +__weak void mxsfb_system_setup(void) +{ +} /* * DENX M28EVK: @@ -75,6 +89,9 @@ static void mxs_lcd_init(GraphicDevice *panel, writel(valid_data << LCDIF_CTRL1_BYTE_PACKING_FORMAT_OFFSET, ®s->hw_lcdif_ctrl1); + + mxsfb_system_setup(); + writel((mode->yres << LCDIF_TRANSFER_COUNT_V_COUNT_OFFSET) | mode->xres, ®s->hw_lcdif_transfer_count); @@ -102,8 +119,10 @@ static void mxs_lcd_init(GraphicDevice *panel, /* Flush FIFO first */ writel(LCDIF_CTRL1_FIFO_CLEAR, ®s->hw_lcdif_ctrl1_set); +#ifndef CONFIG_VIDEO_MXS_MODE_SYSTEM /* Sync signals ON */ setbits_le32(®s->hw_lcdif_vdctrl4, LCDIF_VDCTRL4_SYNC_SIGNALS_ON); +#endif /* FIFO cleared */ writel(LCDIF_CTRL1_FIFO_CLEAR, ®s->hw_lcdif_ctrl1_clr); @@ -161,7 +180,8 @@ void *video_hw_init(void) panel.memSize = mode.xres * mode.yres * panel.gdfBytesPP; /* Allocate framebuffer */ - fb = malloc(panel.memSize); + fb = memalign(ARCH_DMA_MINALIGN, + roundup(panel.memSize, ARCH_DMA_MINALIGN)); if (!fb) { printf("MXSFB: Error allocating framebuffer!\n"); return NULL; @@ -177,5 +197,28 @@ void *video_hw_init(void) /* Start framebuffer */ mxs_lcd_init(&panel, &mode, bpp); +#ifdef CONFIG_VIDEO_MXS_MODE_SYSTEM + /* + * If the LCD runs in system mode, the LCD refresh has to be triggered + * manually by setting the RUN bit in HW_LCDIF_CTRL register. To avoid + * having to set this bit manually after every single change in the + * framebuffer memory, we set up specially crafted circular DMA, which + * sets the RUN bit, then waits until it gets cleared and repeats this + * infinitelly. This way, we get smooth continuous updates of the LCD. + */ + struct mxs_lcdif_regs *regs = (struct mxs_lcdif_regs *)MXS_LCDIF_BASE; + + memset(&desc, 0, sizeof(struct mxs_dma_desc)); + desc.address = (dma_addr_t)&desc; + desc.cmd.data = MXS_DMA_DESC_COMMAND_NO_DMAXFER | MXS_DMA_DESC_CHAIN | + MXS_DMA_DESC_WAIT4END | + (1 << MXS_DMA_DESC_PIO_WORDS_OFFSET); + desc.cmd.pio_words[0] = readl(®s->hw_lcdif_ctrl) | LCDIF_CTRL_RUN; + desc.cmd.next = (uint32_t)&desc.cmd; + + /* Execute the DMA chain. */ + mxs_dma_circ_start(MXS_DMA_CHANNEL_AHB_APBH_LCDIF, &desc); +#endif + return (void *)&panel; } diff --git a/drivers/video/s6e8ax0.c b/drivers/video/s6e8ax0.c index fc09252..0e97f51 100644 --- a/drivers/video/s6e8ax0.c +++ b/drivers/video/s6e8ax0.c @@ -34,11 +34,11 @@ static void s6e8ax0_panel_cond(struct mipi_dsim_device *dsim_dev) if (reverse) { ops->cmd_write(dsim_dev, MIPI_DSI_DCS_LONG_WRITE, - (unsigned int)data_to_send_reverse, + data_to_send_reverse, ARRAY_SIZE(data_to_send_reverse)); } else { ops->cmd_write(dsim_dev, MIPI_DSI_DCS_LONG_WRITE, - (unsigned int)data_to_send, ARRAY_SIZE(data_to_send)); + data_to_send, ARRAY_SIZE(data_to_send)); } } @@ -50,8 +50,7 @@ static void s6e8ax0_display_cond(struct mipi_dsim_device *dsim_dev) }; ops->cmd_write(dsim_dev, MIPI_DSI_DCS_LONG_WRITE, - (unsigned int)data_to_send, - ARRAY_SIZE(data_to_send)); + data_to_send, ARRAY_SIZE(data_to_send)); } static void s6e8ax0_gamma_cond(struct mipi_dsim_device *dsim_dev) @@ -65,15 +64,18 @@ static void s6e8ax0_gamma_cond(struct mipi_dsim_device *dsim_dev) }; ops->cmd_write(dsim_dev, MIPI_DSI_DCS_LONG_WRITE, - (unsigned int)data_to_send, - ARRAY_SIZE(data_to_send)); + data_to_send, ARRAY_SIZE(data_to_send)); } static void s6e8ax0_gamma_update(struct mipi_dsim_device *dsim_dev) { struct mipi_dsim_master_ops *ops = dsim_dev->master_ops; + static const unsigned char data_to_send[] = { + 0xf7, 0x03 + }; - ops->cmd_write(dsim_dev, MIPI_DSI_DCS_SHORT_WRITE_PARAM, 0xf7, 0x3); + ops->cmd_write(dsim_dev, MIPI_DSI_DCS_SHORT_WRITE_PARAM, data_to_send, + ARRAY_SIZE(data_to_send)); } static void s6e8ax0_etc_source_control(struct mipi_dsim_device *dsim_dev) @@ -84,8 +86,7 @@ static void s6e8ax0_etc_source_control(struct mipi_dsim_device *dsim_dev) }; ops->cmd_write(dsim_dev, MIPI_DSI_DCS_LONG_WRITE, - (unsigned int)data_to_send, - ARRAY_SIZE(data_to_send)); + data_to_send, ARRAY_SIZE(data_to_send)); } static void s6e8ax0_etc_pentile_control(struct mipi_dsim_device *dsim_dev) @@ -97,8 +98,7 @@ static void s6e8ax0_etc_pentile_control(struct mipi_dsim_device *dsim_dev) }; ops->cmd_write(dsim_dev, MIPI_DSI_DCS_LONG_WRITE, - (unsigned int)data_to_send, - ARRAY_SIZE(data_to_send)); + data_to_send, ARRAY_SIZE(data_to_send)); } static void s6e8ax0_etc_mipi_control1(struct mipi_dsim_device *dsim_dev) @@ -109,8 +109,7 @@ static void s6e8ax0_etc_mipi_control1(struct mipi_dsim_device *dsim_dev) }; ops->cmd_write(dsim_dev, MIPI_DSI_DCS_LONG_WRITE, - (unsigned int)data_to_send, - ARRAY_SIZE(data_to_send)); + data_to_send, ARRAY_SIZE(data_to_send)); } static void s6e8ax0_etc_mipi_control2(struct mipi_dsim_device *dsim_dev) @@ -121,8 +120,7 @@ static void s6e8ax0_etc_mipi_control2(struct mipi_dsim_device *dsim_dev) }; ops->cmd_write(dsim_dev, MIPI_DSI_DCS_LONG_WRITE, - (unsigned int)data_to_send, - ARRAY_SIZE(data_to_send)); + data_to_send, ARRAY_SIZE(data_to_send)); } static void s6e8ax0_etc_power_control(struct mipi_dsim_device *dsim_dev) @@ -133,14 +131,18 @@ static void s6e8ax0_etc_power_control(struct mipi_dsim_device *dsim_dev) }; ops->cmd_write(dsim_dev, MIPI_DSI_DCS_LONG_WRITE, - (unsigned int)data_to_send, ARRAY_SIZE(data_to_send)); + data_to_send, ARRAY_SIZE(data_to_send)); } static void s6e8ax0_etc_mipi_control3(struct mipi_dsim_device *dsim_dev) { struct mipi_dsim_master_ops *ops = dsim_dev->master_ops; + static const unsigned char data_to_send[] = { + 0xe3, 0x40 + }; - ops->cmd_write(dsim_dev, MIPI_DSI_DCS_SHORT_WRITE_PARAM, 0xe3, 0x40); + ops->cmd_write(dsim_dev, MIPI_DSI_DCS_SHORT_WRITE_PARAM, data_to_send, + ARRAY_SIZE(data_to_send)); } static void s6e8ax0_etc_mipi_control4(struct mipi_dsim_device *dsim_dev) @@ -151,7 +153,7 @@ static void s6e8ax0_etc_mipi_control4(struct mipi_dsim_device *dsim_dev) }; ops->cmd_write(dsim_dev, MIPI_DSI_DCS_LONG_WRITE, - (unsigned int)data_to_send, ARRAY_SIZE(data_to_send)); + data_to_send, ARRAY_SIZE(data_to_send)); } static void s6e8ax0_elvss_set(struct mipi_dsim_device *dsim_dev) @@ -162,24 +164,29 @@ static void s6e8ax0_elvss_set(struct mipi_dsim_device *dsim_dev) }; ops->cmd_write(dsim_dev, MIPI_DSI_DCS_LONG_WRITE, - (unsigned int)data_to_send, - ARRAY_SIZE(data_to_send)); + data_to_send, ARRAY_SIZE(data_to_send)); } static void s6e8ax0_display_on(struct mipi_dsim_device *dsim_dev) { struct mipi_dsim_master_ops *ops = dsim_dev->master_ops; + static const unsigned char data_to_send[] = { + 0x29, 0x00 + }; - ops->cmd_write(dsim_dev, - MIPI_DSI_DCS_SHORT_WRITE, 0x29, 0x00); + ops->cmd_write(dsim_dev, MIPI_DSI_DCS_SHORT_WRITE, data_to_send, + ARRAY_SIZE(data_to_send)); } static void s6e8ax0_sleep_out(struct mipi_dsim_device *dsim_dev) { struct mipi_dsim_master_ops *ops = dsim_dev->master_ops; + static const unsigned char data_to_send[] = { + 0x11, 0x00 + }; - ops->cmd_write(dsim_dev, - MIPI_DSI_DCS_SHORT_WRITE, 0x11, 0x00); + ops->cmd_write(dsim_dev, MIPI_DSI_DCS_SHORT_WRITE, data_to_send, + ARRAY_SIZE(data_to_send)); } static void s6e8ax0_apply_level1_key(struct mipi_dsim_device *dsim_dev) @@ -190,7 +197,7 @@ static void s6e8ax0_apply_level1_key(struct mipi_dsim_device *dsim_dev) }; ops->cmd_write(dsim_dev, MIPI_DSI_DCS_LONG_WRITE, - (unsigned int)data_to_send, ARRAY_SIZE(data_to_send)); + data_to_send, ARRAY_SIZE(data_to_send)); } static void s6e8ax0_apply_mtp_key(struct mipi_dsim_device *dsim_dev) @@ -201,7 +208,7 @@ static void s6e8ax0_apply_mtp_key(struct mipi_dsim_device *dsim_dev) }; ops->cmd_write(dsim_dev, MIPI_DSI_DCS_LONG_WRITE, - (unsigned int)data_to_send, ARRAY_SIZE(data_to_send)); + data_to_send, ARRAY_SIZE(data_to_send)); } static void s6e8ax0_panel_init(struct mipi_dsim_device *dsim_dev) diff --git a/drivers/video/sed156x.c b/drivers/video/sed156x.c index d8b0d7f..f324354 100644 --- a/drivers/video/sed156x.c +++ b/drivers/video/sed156x.c @@ -25,7 +25,6 @@ /* include the font data */ #include <video_font.h> -#include <video_font_data.h> #if VIDEO_FONT_WIDTH != 8 || VIDEO_FONT_HEIGHT != 16 #error Expecting VIDEO_FONT_WIDTH == 8 && VIDEO_FONT_HEIGHT == 16 diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 7e255ce..3ade624 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -18,6 +18,7 @@ COBJS-$(CONFIG_TNETV107X_WATCHDOG) += tnetv107x_wdt.o COBJS-$(CONFIG_S5P) += s5p_wdt.o COBJS-$(CONFIG_XILINX_TB_WATCHDOG) += xilinx_tb_wdt.o COBJS-$(CONFIG_BFIN_WATCHDOG) += bfin_wdt.o +COBJS-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/watchdog/omap_wdt.c b/drivers/watchdog/omap_wdt.c new file mode 100644 index 0000000..7ea4b60 --- /dev/null +++ b/drivers/watchdog/omap_wdt.c @@ -0,0 +1,121 @@ +/* + * omap_wdt.c + * + * (C) Copyright 2013 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * SPDX-License-Identifier: GPL-2.0 + * + * Based on: + * + * Watchdog driver for the TI OMAP 16xx & 24xx/34xx 32KHz (non-secure) watchdog + * + * commit 2d991a164a61858012651e13c59521975504e260 + * Author: Bill Pemberton <wfp5p@virginia.edu> + * Date: Mon Nov 19 13:21:41 2012 -0500 + * + * watchdog: remove use of __devinit + * + * CONFIG_HOTPLUG is going away as an option so __devinit is no longer + * needed. + * + * Author: MontaVista Software, Inc. + * <gdavis@mvista.com> or <source@mvista.com> + * + * History: + * + * 20030527: George G. Davis <gdavis@mvista.com> + * Initially based on linux-2.4.19-rmk7-pxa1/drivers/char/sa1100_wdt.c + * (c) Copyright 2000 Oleg Drokin <green@crimea.edu> + * Based on SoftDog driver by Alan Cox <alan@lxorguk.ukuu.org.uk> + * + * Copyright (c) 2004 Texas Instruments. + * 1. Modified to support OMAP1610 32-KHz watchdog timer + * 2. Ported to 2.6 kernel + * + * Copyright (c) 2005 David Brownell + * Use the driver model and standard identifiers; handle bigger timeouts. + */ + +#include <common.h> +#include <watchdog.h> +#include <asm/arch/hardware.h> +#include <asm/io.h> +#include <asm/processor.h> +#include <asm/arch/cpu.h> + +/* Hardware timeout in seconds */ +#define WDT_HW_TIMEOUT 60 + +static unsigned int wdt_trgr_pattern = 0x1234; + +void hw_watchdog_reset(void) +{ + struct wd_timer *wdt = (struct wd_timer *)WDT_BASE; + + /* wait for posted write to complete */ + while ((readl(&wdt->wdtwwps)) & WDT_WWPS_PEND_WTGR) + ; + + wdt_trgr_pattern = ~wdt_trgr_pattern; + writel(wdt_trgr_pattern, &wdt->wdtwtgr); + + /* wait for posted write to complete */ + while ((readl(&wdt->wdtwwps) & WDT_WWPS_PEND_WTGR)) + ; +} + +static int omap_wdt_set_timeout(unsigned int timeout) +{ + struct wd_timer *wdt = (struct wd_timer *)WDT_BASE; + u32 pre_margin = GET_WLDR_VAL(timeout); + + /* just count up at 32 KHz */ + while (readl(&wdt->wdtwwps) & WDT_WWPS_PEND_WLDR) + ; + + writel(pre_margin, &wdt->wdtwldr); + while (readl(&wdt->wdtwwps) & WDT_WWPS_PEND_WLDR) + ; + + return 0; +} + +void hw_watchdog_init(void) +{ + struct wd_timer *wdt = (struct wd_timer *)WDT_BASE; + + /* initialize prescaler */ + while (readl(&wdt->wdtwwps) & WDT_WWPS_PEND_WCLR) + ; + + writel(WDT_WCLR_PRE | (PTV << WDT_WCLR_PTV_OFF), &wdt->wdtwclr); + while (readl(&wdt->wdtwwps) & WDT_WWPS_PEND_WCLR) + ; + + omap_wdt_set_timeout(WDT_HW_TIMEOUT); + + /* Sequence to enable the watchdog */ + writel(0xBBBB, &wdt->wdtwspr); + while ((readl(&wdt->wdtwwps)) & WDT_WWPS_PEND_WSPR) + ; + + writel(0x4444, &wdt->wdtwspr); + while ((readl(&wdt->wdtwwps)) & WDT_WWPS_PEND_WSPR) + ; +} + +void hw_watchdog_disable(void) +{ + struct wd_timer *wdt = (struct wd_timer *)WDT_BASE; + + /* + * Disable watchdog + */ + writel(0xAAAA, &wdt->wdtwspr); + while (readl(&wdt->wdtwwps) != 0x0) + ; + writel(0x5555, &wdt->wdtwspr); + while (readl(&wdt->wdtwwps) != 0x0) + ; +} diff --git a/dts/Makefile b/dts/Makefile index 35303f7..3cf991e 100644 --- a/dts/Makefile +++ b/dts/Makefile @@ -17,15 +17,15 @@ $(error Please define CONFIG_DEFAULT_DEVICE_TREE in your board header file)) DEVICE_TREE = $(subst ",,$(CONFIG_DEFAULT_DEVICE_TREE)) endif -$(if $(CONFIG_ARCH_DEVICE_TREE),,\ -$(error Your architecture does not have device tree support enabled. \ -Please define CONFIG_ARCH_DEVICE_TREE)) +DTS_INCDIRS = $(SRCTREE)/board/$(VENDOR)/$(BOARD)/dts +DTS_INCDIRS += $(SRCTREE)/board/$(VENDOR)/dts +DTS_INCDIRS += $(SRCTREE)/arch/$(ARCH)/dts -# We preprocess the device tree file provide a useful define -DTS_CPPFLAGS := -x assembler-with-cpp \ - -DARCH_CPU_DTS=\"$(SRCTREE)/arch/$(ARCH)/dts/$(CONFIG_ARCH_DEVICE_TREE).dtsi\" \ - -DBOARD_DTS=\"$(SRCTREE)/board/$(VENDOR)/$(BOARD)/dts/$(DEVICE_TREE).dts\" \ - -I$(SRCTREE)/board/$(VENDOR)/dts -I$(SRCTREE)/arch/$(ARCH)/dts +DTS_CPPFLAGS := -x assembler-with-cpp -undef -D__DTS__ \ + -nostdinc $(addprefix -I,$(DTS_INCDIRS)) + +DTC_FLAGS := -R 4 -p 0x1000 \ + $(addprefix -i ,$(DTS_INCDIRS)) all: $(obj).depend $(LIB) @@ -35,13 +35,8 @@ all: $(obj).depend $(LIB) DT_BIN := $(obj)dt.dtb $(DT_BIN): $(TOPDIR)/board/$(VENDOR)/dts/$(DEVICE_TREE).dts - rc=$$( \ - cat $< | $(CPP) -P $(DTS_CPPFLAGS) - | \ - { { $(DTC) -R 4 -p 0x1000 -O dtb -o ${DT_BIN} - 2>&1 ; \ - echo $$? >&3 ; } | \ - grep -v '^DTC: dts->dtb on file' ; \ - } 3>&1 1>&2 ) ; \ - exit $$rc + $(CPP) $(DTS_CPPFLAGS) $< -o $(DT_BIN).dts.tmp + $(DTC) $(DTC_FLAGS) -O dtb -o ${DT_BIN} $(DT_BIN).dts.tmp process_lds = \ $(1) | sed -r -n 's/^OUTPUT_$(2)[ ("]*([^")]*).*/\1/p' diff --git a/fs/yaffs2/yaffs_qsort.c b/fs/yaffs2/yaffs_qsort.c index afd1ffa..1ca5895 100644 --- a/fs/yaffs2/yaffs_qsort.c +++ b/fs/yaffs2/yaffs_qsort.c @@ -2,29 +2,7 @@ * Copyright (c) 1992, 1993 * The Regents of the University of California. All rights reserved. * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. + * SPDX-License-Identifier: BSD-3-Clause */ #include "yportenv.h" diff --git a/include/api_public.h b/include/api_public.h index 4420c99..f5c89f3 100644 --- a/include/api_public.h +++ b/include/api_public.h @@ -3,50 +3,7 @@ * * Written by: Rafal Jaworowski <raj@semihalf.com> * - * This file is dual licensed; you can use it under the terms of - * either the GPL, or the BSD license, at your option. - * - * I. GPL: - * - * This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - * Alternatively, - * - * II. BSD license: - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. + * SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause */ #ifndef _API_PUBLIC_H_ diff --git a/include/asm-generic/u-boot.h b/include/asm-generic/u-boot.h index 29e0438..4387201 100644 --- a/include/asm-generic/u-boot.h +++ b/include/asm-generic/u-boot.h @@ -69,7 +69,6 @@ typedef struct bd_info { unsigned int bi_baudrate; /* Console Baudrate */ #if defined(CONFIG_405) || \ defined(CONFIG_405GP) || \ - defined(CONFIG_405CR) || \ defined(CONFIG_405EP) || \ defined(CONFIG_405EZ) || \ defined(CONFIG_405EX) || \ diff --git a/include/bootstage.h b/include/bootstage.h index 25b4e07..87bf906 100644 --- a/include/bootstage.h +++ b/include/bootstage.h @@ -353,6 +353,7 @@ static inline ulong bootstage_error(enum bootstage_id id) static inline ulong bootstage_mark_name(enum bootstage_id id, const char *name) { + show_boot_progress(id); return 0; } diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h index 0904343..2f0bc6b 100644 --- a/include/configs/B4860QDS.h +++ b/include/configs/B4860QDS.h @@ -33,7 +33,6 @@ #define CONFIG_E500MC /* BOOKE e500mc family */ #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ #define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ -#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ #define CONFIG_MP /* support multiple processors */ #ifndef CONFIG_SYS_TEXT_BASE @@ -75,6 +74,13 @@ #define VSC3308_TX_ADDRESS 0x02 #define VSC3308_RX_ADDRESS 0x03 +/* IDT clock synthesizers */ +#define CONFIG_IDT8T49N222A +#define I2C_CH_IDT 0x9 + +#define IDT_SERDES1_ADDRESS 0x6E +#define IDT_SERDES2_ADDRESS 0x6C + #define CONFIG_ENV_OVERWRITE #ifdef CONFIG_SYS_NO_FLASH @@ -578,6 +584,8 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_DPAA_FMAN +#define CONFIG_SYS_DPAA_RMAN + /* Default address of microcode for the Linux Fman driver */ #if defined(CONFIG_SPIFLASH) /* diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h index 1ab6891..03f3a4f 100644 --- a/include/configs/BSC9132QDS.h +++ b/include/configs/BSC9132QDS.h @@ -224,6 +224,10 @@ combinations. this should be removed later #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR +/* DSP CCSRBAR */ +#define CONFIG_SYS_FSL_DSP_CCSRBAR CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT +#define CONFIG_SYS_FSL_DSP_CCSRBAR_PHYS CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT + /* * IFC Definitions */ diff --git a/include/configs/C29XPCIE.h b/include/configs/C29XPCIE.h new file mode 100644 index 0000000..83779ef --- /dev/null +++ b/include/configs/C29XPCIE.h @@ -0,0 +1,456 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * C29XPCIE board configuration file + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_PHYS_64BIT + +#ifdef CONFIG_C29XPCIE +#define CONFIG_PPC_C29X +#endif + +#ifdef CONFIG_SPIFLASH +#define CONFIG_RAMBOOT_SPIFLASH +#define CONFIG_SYS_TEXT_BASE 0x11000000 +#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc +#endif + +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#endif + +#ifndef CONFIG_RESET_VECTOR_ADDRESS +#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc +#endif + +#ifndef CONFIG_SYS_MONITOR_BASE +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE +#endif + +/* High Level Configuration Options */ +#define CONFIG_BOOKE /* BOOKE */ +#define CONFIG_E500 /* BOOKE e500 family */ +#define CONFIG_MPC85xx +#define CONFIG_FSL_IFC /* Enable IFC Support */ +#define CONFIG_SYS_HAS_SERDES /* common SERDES init code */ + +#define CONFIG_PCI /* Enable PCI/PCIE */ +#ifdef CONFIG_PCI +#define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ +#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ +#define CONFIG_PCI_INDIRECT_BRIDGE +#define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ +#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ + +#define CONFIG_CMD_NET +#define CONFIG_CMD_PCI + +#define CONFIG_E1000 + +/* + * PCI Windows + * Memory space is mapped 1-1, but I/O space must start from 0. + */ +/* controller 1, Slot 1, tgtid 1, Base address a000 */ +#define CONFIG_SYS_PCIE1_NAME "Slot 1" +#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 +#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull +#define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000 +#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ +#define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc00000ull + +#define CONFIG_PCI_PNP /* do pci plug-and-play */ + +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CONFIG_DOS_PARTITION +#endif + +#define CONFIG_FSL_LAW /* Use common FSL init code */ +#define CONFIG_TSEC_ENET +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_DDR_CLK_FREQ 100000000 +#define CONFIG_SYS_CLK_FREQ 66666666 + +#define CONFIG_HWCONFIG + +/* + * These can be toggled for performance analysis, otherwise use default. + */ +#define CONFIG_L2_CACHE /* toggle L2 cache */ +#define CONFIG_BTB /* toggle branch predition */ + +#define CONFIG_ADDR_STREAMING /* toggle addr streaming */ + +#define CONFIG_ENABLE_36BIT_PHYS + +#define CONFIG_ADDR_MAP 1 +#define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ + +#define CONFIG_SYS_MEMTEST_START 0x00200000 +#define CONFIG_SYS_MEMTEST_END 0x00400000 +#define CONFIG_PANIC_HANG + +/* DDR Setup */ +#define CONFIG_FSL_DDR3 +#define CONFIG_DDR_SPD +#define CONFIG_SYS_SPD_BUS_NUM 0 +#define SPD_EEPROM_ADDRESS 0x50 +#define CONFIG_SYS_DDR_RAW_TIMING + +/* DDR ECC Setup*/ +#define CONFIG_DDR_ECC +#define CONFIG_MEM_INIT_VALUE 0xDeadBeef +#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER + +#define CONFIG_SYS_SDRAM_SIZE 512 +#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE + +#define CONFIG_DIMM_SLOTS_PER_CTLR 1 +#define CONFIG_CHIP_SELECTS_PER_CTRL 1 + +#define CONFIG_SYS_CCSRBAR 0xffe00000 +#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR + +/* Platform SRAM setting */ +#define CONFIG_SYS_PLATFORM_SRAM_BASE 0xffb00000 +#define CONFIG_SYS_PLATFORM_SRAM_BASE_PHYS \ + (0xf00000000ull | CONFIG_SYS_PLATFORM_SRAM_BASE) +#define CONFIG_SYS_PLATFORM_SRAM_SIZE (512 << 10) + +/* + * IFC Definitions + */ +/* NOR Flash on IFC */ +#define CONFIG_SYS_FLASH_BASE 0xec000000 +#define CONFIG_SYS_MAX_FLASH_SECT 512 /* 64M */ + +#define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) + +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS } +#define CONFIG_SYS_MAX_FLASH_BANKS 1 + +#define CONFIG_SYS_FLASH_QUIET_TEST +#define CONFIG_FLASH_SHOW_PROGRESS 45 +#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* in ms */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* in ms */ + +/* 16Bit NOR Flash - S29GL512S10TFI01 */ +#define CONFIG_SYS_NOR_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ + CSPR_PORT_SIZE_16 | \ + CSPR_MSEL_NOR | \ + CSPR_V) +#define CONFIG_SYS_NOR_AMASK IFC_AMASK(64*1024*1024) +#define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(4) +#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ + FTIM0_NOR_TEADC(0x5) | \ + FTIM0_NOR_TEAHC(0x5)) +#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x1e) | \ + FTIM1_NOR_TRAD_NOR(0x0f) | \ + FTIM1_NOR_TSEQRAD_NOR(0x0f)) +#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ + FTIM2_NOR_TCH(0x4) | \ + FTIM2_NOR_TWP(0x1c)) +#define CONFIG_SYS_NOR_FTIM3 0x0 + +/* CFI for NOR Flash */ +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE + +/* NAND Flash on IFC */ +#define CONFIG_NAND_FSL_IFC +#define CONFIG_SYS_NAND_BASE 0xff800000 +#define CONFIG_SYS_NAND_BASE_PHYS 0xfff800000ull + +#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } + +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_MTD_NAND_VERIFY_WRITE +#define CONFIG_CMD_NAND +#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) + +/* 8Bit NAND Flash - K9F1G08U0B */ +#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ + | CSPR_PORT_SIZE_8 \ + | CSPR_MSEL_NAND \ + | CSPR_V) +#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) +#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ + | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ + | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ + | CSOR_NAND_RAL_2 /* RAL = 2 Bytes */ \ + | CSOR_NAND_PGS_2K /* Page Size = 2k */ \ + | CSOR_NAND_SPRZ_64 /* Spare size = 64 */ \ + | CSOR_NAND_PB(64)) /* 64 Pages Per Block */ +#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x01) | \ + FTIM0_NAND_TWP(0x0c) | \ + FTIM0_NAND_TWCHT(0x08) | \ + FTIM0_NAND_TWH(0x06)) +#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x28) | \ + FTIM1_NAND_TWBE(0x1d) | \ + FTIM1_NAND_TRR(0x08) | \ + FTIM1_NAND_TRP(0x0c)) +#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0c) | \ + FTIM2_NAND_TREH(0x0a) | \ + FTIM2_NAND_TWHRE(0x18)) +#define CONFIG_SYS_NAND_FTIM3 (FTIM3_NAND_TWW(0x04)) + +#define CONFIG_SYS_NAND_DDR_LAW 11 + +/* Set up IFC registers for boot location NOR/NAND */ +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 +#define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR +#define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK +#define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR +#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 +#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 +#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 +#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 + +/* CPLD on IFC, selected by CS2 */ +#define CONFIG_SYS_CPLD_BASE 0xffdf0000 +#define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull \ + | CONFIG_SYS_CPLD_BASE) + +#define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \ + | CSPR_PORT_SIZE_8 \ + | CSPR_MSEL_GPCM \ + | CSPR_V) +#define CONFIG_SYS_AMASK2 IFC_AMASK(64*1024) +#define CONFIG_SYS_CSOR2 0x0 +/* CPLD Timing parameters for IFC CS2 */ +#define CONFIG_SYS_CS2_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ + FTIM0_GPCM_TEADC(0x0e) | \ + FTIM0_GPCM_TEAHC(0x0e)) +#define CONFIG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ + FTIM1_GPCM_TRAD(0x1f)) +#define CONFIG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ + FTIM2_GPCM_TCH(0x0) | \ + FTIM2_GPCM_TWP(0x1f)) +#define CONFIG_SYS_CS2_FTIM3 0x0 + +#if defined(CONFIG_RAMBOOT_SPIFLASH) +#define CONFIG_SYS_RAMBOOT +#define CONFIG_SYS_EXTRA_ENV_RELOC +#endif + +#define CONFIG_BOARD_EARLY_INIT_R + +#define CONFIG_SYS_INIT_RAM_LOCK +#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 +#define CONFIG_SYS_INIT_RAM_END 0x00004000 + +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END \ + - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) +#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) + +/* Serial Port */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) + +#define CONFIG_SERIAL_MULTI /* Enable both serial ports */ +#define CONFIG_SYS_CONSOLE_IS_IN_ENV + +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) + +/* Use the HUSH parser */ +#define CONFIG_SYS_HUSH_PARSER + +/* + * Pass open firmware flat tree + */ +#define CONFIG_OF_LIBFDT +#define CONFIG_OF_BOARD_SETUP +#define CONFIG_OF_STDOUT_VIA_ALIAS + +/* new uImage format support */ +#define CONFIG_FIT +#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ + +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_FSL +#define CONFIG_SYS_FSL_I2C_SPEED 400000 +#define CONFIG_SYS_FSL_I2C2_SPEED 400000 +#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 +#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 + +/* I2C EEPROM */ +/* enable read and write access to EEPROM */ +#define CONFIG_CMD_EEPROM +#define CONFIG_SYS_I2C_MULTI_EEPROMS +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 + +#define CONFIG_CMD_I2C + +/* eSPI - Enhanced SPI */ +#define CONFIG_FSL_ESPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_SPANSION +#define CONFIG_SPI_FLASH_EON +#define CONFIG_CMD_SF +#define CONFIG_SF_DEFAULT_SPEED 10000000 +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 + +#ifdef CONFIG_TSEC_ENET +#define CONFIG_NET_MULTI +#define CONFIG_MII /* MII PHY management */ +#define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "eTSEC1" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "eTSEC2" + +/* Default mode is RGMII mode */ +#define TSEC1_PHY_ADDR 0 +#define TSEC2_PHY_ADDR 2 + +#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) + +#define CONFIG_ETHPRIME "eTSEC1" + +#define CONFIG_PHY_GIGE +#endif /* CONFIG_TSEC_ENET */ + +/* + * Environment + */ +#if defined(CONFIG_SYS_RAMBOOT) +#if defined(CONFIG_RAMBOOT_SPIFLASH) +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_CS 0 +#define CONFIG_ENV_SPI_MAX_HZ 10000000 +#define CONFIG_ENV_SPI_MODE 0 +#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ +#define CONFIG_ENV_SECT_SIZE 0x10000 +#define CONFIG_ENV_SIZE 0x2000 +#endif +#else +#define CONFIG_ENV_IS_IN_FLASH +#if CONFIG_SYS_MONITOR_BASE > 0xfff80000 +#define CONFIG_ENV_ADDR 0xfff80000 +#else +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) +#endif +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x20000 +#endif + +#define CONFIG_LOADS_ECHO +#define CONFIG_SYS_LOADS_BAUD_CHANGE + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ERRATA +#define CONFIG_CMD_ELF +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_SETEXPR +#define CONFIG_CMD_REGINFO + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_CMDLINE_EDITING /* Command-line editing */ +#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ +#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ + +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) + /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ +#define CONFIG_SYS_HZ 1000 /* dec freq: 1ms ticks */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 64 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux */ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ + +/* + * Environment Configuration + */ + +#ifdef CONFIG_TSEC_ENET +#define CONFIG_HAS_ETH0 +#define CONFIG_HAS_ETH1 +#endif + +#define CONFIG_ROOTPATH "/opt/nfsroot" +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_UBOOTPATH u-boot.bin/* U-Boot image on TFTP server */ + +/* default location for tftp and bootm */ +#define CONFIG_LOADADDR 1000000 + +#define CONFIG_BOOTDELAY -1 /* -1 disables auto-boot */ + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hwconfig=" __stringify(CONFIG_DEF_HWCONFIG) "\0" \ + "netdev=eth0\0" \ + "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ + "loadaddr=1000000\0" \ + "consoledev=ttyS0\0" \ + "ramdiskaddr=2000000\0" \ + "ramdiskfile=rootfs.ext2.gz.uboot\0" \ + "fdtaddr=c00000\0" \ + "fdtfile=name/of/device-tree.dtb\0" \ + "othbootargs=ramdisk_size=600000\0" \ + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs; " \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND + +#endif /* __CONFIG_H */ diff --git a/include/configs/CANBT.h b/include/configs/CANBT.h deleted file mode 100644 index 40471b7..0000000 --- a/include/configs/CANBT.h +++ /dev/null @@ -1,215 +0,0 @@ -/* - * (C) Copyright 2001 - * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_405CR 1 /* This is a PPC405CR CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ -#define CONFIG_CANBT 1 /* ...on a CANBT board */ - -#define CONFIG_SYS_TEXT_BASE 0xFFFC0000 - -#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ - -#define CONFIG_SYS_CLK_FREQ 25000000 /* external frequency to pll */ - -#define CONFIG_BAUDRATE 115200 -#define CONFIG_BOOTDELAY 1 /* autoboot after 1 seconds */ - -#undef CONFIG_BOOTARGS -#define CONFIG_BOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw console=ttyS0,115200; " \ - "bootm ffe00000 ffe80000" - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -#undef CONFIG_PCI_PNP /* no pci plug-and-play */ - -#define CONFIG_PHY_ADDR 0 /* PHY address */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_EEPROM - -#undef CONFIG_CMD_NET -#undef CONFIG_CMD_NFS - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/ - -#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ - -#define CONFIG_CONS_INDEX 1 /* Use UART0 */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_serial_clock() - -#define CONFIG_SYS_EXT_SERIAL_CLOCK 14745600 /* use external serial clock */ - -/* The following table includes the supported baudrates */ -#define CONFIG_SYS_BAUDRATE_TABLE \ - { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \ - 57600, 115200, 230400, 460800, 921600 } - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ - -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_MONITOR_BASE -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (~(CONFIG_SYS_TEXT_BASE) + 1) -#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_SYS_FLASH_WORD_SIZE unsigned short /* flash word size (width) */ -#define CONFIG_SYS_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */ -#define CONFIG_SYS_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */ -/* - * The following defines are added for buggy IOP480 byte interface. - * All other boards should use the standard values (CPCI405 etc.) - */ -#define CONFIG_SYS_FLASH_READ0 0x0000 /* 0 is standard */ -#define CONFIG_SYS_FLASH_READ1 0x0001 /* 1 is standard */ -#define CONFIG_SYS_FLASH_READ2 0x0002 /* 2 is standard */ - -#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ - -#if 0 /* Use FLASH for environment variables */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_OFFSET 0x00010000 /* Offset of Environment Sector */ -#define CONFIG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */ - -#define CONFIG_ENV_SECT_SIZE 0x10000 /* see README - env sector total size */ - -#else /* Use EEPROM for environment variables */ - -#define CONFIG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */ -#define CONFIG_ENV_OFFSET 0x000 /* environment starts at the beginning of the EEPROM */ -#define CONFIG_ENV_SIZE 0x400 /* 1024 bytes may be used for env vars */ - /* total size of a CAT24WC08 is 1024 bytes */ -#endif - -/*----------------------------------------------------------------------- - * I2C EEPROM (CAT24WC08) for environment - */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_PPC4XX -#define CONFIG_SYS_I2C_PPC4XX_CH0 -#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 -#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F - -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* bytes of address */ -/* mask of address bits that overflow into the "EEPROM chip address" */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07 - -/* - * Init Memory Controller: - * - * BR0/1 and OR0/1 (FLASH) - */ - -#define FLASH_BASE0_PRELIM 0xFFC00000 /* FLASH bank #0 */ -#define FLASH_BASE1_PRELIM 0 /* FLASH bank #1 */ - -/*----------------------------------------------------------------------- - * External Bus Controller (EBC) Setup - */ - -/* Memory Bank 0 (Flash Bank 0) initialization */ -#define CONFIG_SYS_EBC_PB0AP 0x92015480 -#define CONFIG_SYS_EBC_PB0CR 0xFFC5A000 /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */ - -/* Memory Bank 1 (CAN/USB) initialization */ -#define CONFIG_SYS_EBC_PB1AP 0x010053C0 /* enable Ready, BEM=1 */ -#define CONFIG_SYS_EBC_PB1CR 0xF0018000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */ - -/* Memory Bank 2 (Misc-IO/LEDs) initialization */ -#define CONFIG_SYS_EBC_PB2AP 0x000004c0 /* no Ready, BEM=1 */ -#define CONFIG_SYS_EBC_PB2CR 0xF0118000 /* BAS=0xF01,BS=1MB,BU=R/W,BW=8bit */ - -/* Memory Bank 3 (CAN Features) initialization */ -#define CONFIG_SYS_EBC_PB3AP 0x80000040 /* no Ready, BEM=1 */ -#define CONFIG_SYS_EBC_PB3CR 0xF021C000 /* BAS=0xF02,BS=1MB,BU=R/W,BW=32bit */ - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in RAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x00ef0000 /* inside of SDRAM */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x0f00 /* Size of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#endif /* __CONFIG_H */ diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index 6c6ce58..ddcbfa6 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -24,7 +24,6 @@ #define CONFIG_SPL_INIT_MINIMAL #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_NAND_MINIMAL #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" #define CONFIG_SPL_MPC83XX_WAIT_FOR_NAND diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h index d1ce9fd..edece1f 100644 --- a/include/configs/P1022DS.h +++ b/include/configs/P1022DS.h @@ -16,42 +16,105 @@ #endif #ifdef CONFIG_SDCARD -#define CONFIG_RAMBOOT_SDCARD -#define CONFIG_SYS_RAMBOOT -#define CONFIG_SYS_EXTRA_ENV_RELOC -#define CONFIG_SYS_TEXT_BASE 0x11000000 -#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc +#define CONFIG_SPL +#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT +#define CONFIG_SPL_ENV_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SPL_MMC_MINIMAL +#define CONFIG_SPL_FLUSH_IMAGE +#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT +#define CONFIG_FSL_LAW /* Use common FSL init code */ +#define CONFIG_SYS_TEXT_BASE 0x11001000 +#define CONFIG_SPL_TEXT_BASE 0xf8f81000 +#define CONFIG_SPL_PAD_TO 0x18000 +#define CONFIG_SPL_MAX_SIZE (96 * 1024) +#define CONFIG_SYS_MMC_U_BOOT_SIZE (512 << 10) +#define CONFIG_SYS_MMC_U_BOOT_DST (0x11000000) +#define CONFIG_SYS_MMC_U_BOOT_START (0x11000000) +#define CONFIG_SYS_MMC_U_BOOT_OFFS (96 << 10) +#define CONFIG_SYS_MPC85XX_NO_RESETVEC +#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" +#define CONFIG_SPL_MMC_BOOT +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SPL_COMMON_INIT_DDR +#endif #endif #ifdef CONFIG_SPIFLASH -#define CONFIG_RAMBOOT_SPIFLASH -#define CONFIG_SYS_RAMBOOT -#define CONFIG_SYS_EXTRA_ENV_RELOC -#define CONFIG_SYS_TEXT_BASE 0x11000000 -#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc +#define CONFIG_SPL +#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT +#define CONFIG_SPL_ENV_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SPL_SPI_FLASH_MINIMAL +#define CONFIG_SPL_FLUSH_IMAGE +#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT +#define CONFIG_FSL_LAW /* Use common FSL init code */ +#define CONFIG_SYS_TEXT_BASE 0x11001000 +#define CONFIG_SPL_TEXT_BASE 0xf8f81000 +#define CONFIG_SPL_PAD_TO 0x18000 +#define CONFIG_SPL_MAX_SIZE (96 * 1024) +#define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (512 << 10) +#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x11000000) +#define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x11000000) +#define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (96 << 10) +#define CONFIG_SYS_MPC85XX_NO_RESETVEC +#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" +#define CONFIG_SPL_SPI_BOOT +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SPL_COMMON_INIT_DDR +#endif #endif #define CONFIG_NAND_FSL_ELBC #ifdef CONFIG_NAND #define CONFIG_SPL +#define CONFIG_TPL +#ifdef CONFIG_TPL_BUILD +#define CONFIG_SPL_NAND_BOOT +#define CONFIG_SPL_FLUSH_IMAGE +#define CONFIG_SPL_ENV_SUPPORT +#define CONFIG_SPL_NAND_INIT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT +#define CONFIG_SPL_COMMON_INIT_DDR +#define CONFIG_SPL_MAX_SIZE (128 << 10) +#define CONFIG_SPL_TEXT_BASE 0xf8f81000 +#define CONFIG_SYS_MPC85XX_NO_RESETVEC +#define CONFIG_SYS_NAND_U_BOOT_SIZE (576 << 10) +#define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000) +#define CONFIG_SYS_NAND_U_BOOT_START (0x11000000) +#define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10) +#elif defined(CONFIG_SPL_BUILD) #define CONFIG_SPL_INIT_MINIMAL #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_NAND_MINIMAL #define CONFIG_SPL_FLUSH_IMAGE -#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" - -#define CONFIG_SYS_TEXT_BASE 0x00201000 -#define CONFIG_SPL_TEXT_BASE 0xfffff000 -#define CONFIG_SPL_MAX_SIZE 4096 -#define CONFIG_SPL_RELOC_TEXT_BASE 0x00100000 -#define CONFIG_SPL_RELOC_STACK 0x00100000 -#define CONFIG_SYS_NAND_U_BOOT_SIZE ((512 << 10) + CONFIG_SPL_MAX_SIZE) -#define CONFIG_SYS_NAND_U_BOOT_DST (0x00200000 - CONFIG_SPL_MAX_SIZE) -#define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 -#define CONFIG_SYS_NAND_U_BOOT_OFFS 0 -#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" +#define CONFIG_SPL_TEXT_BASE 0xff800000 +#define CONFIG_SPL_MAX_SIZE 4096 +#define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10) +#define CONFIG_SYS_NAND_U_BOOT_DST 0xf8f80000 +#define CONFIG_SYS_NAND_U_BOOT_START 0xf8f80000 +#define CONFIG_SYS_NAND_U_BOOT_OFFS (128 << 10) +#endif +#define CONFIG_SPL_PAD_TO 0x20000 +#define CONFIG_TPL_PAD_TO 0x20000 +#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" +#define CONFIG_SYS_TEXT_BASE 0x11001000 +#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" #endif /* High Level Configuration Options */ @@ -225,11 +288,11 @@ #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE #endif -#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE, } +#define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE} #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND 1 -#define CONFIG_SYS_NAND_BLOCK_SIZE (256 * 1024) +#define CONFIG_SYS_NAND_BLOCK_SIZE (256 * 1024) #define CONFIG_ELBC_NAND_SPL_STATIC_PGSIZE /* NAND flash config */ @@ -292,6 +355,43 @@ #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) /* + * Config the L2 Cache as L2 SRAM +*/ +#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH) +#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 +#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR +#define CONFIG_SYS_L2_SIZE (256 << 10) +#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) +#define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 +#define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 128 * 1024) +#define CONFIG_SPL_RELOC_STACK_SIZE (32 << 10) +#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 160 * 1024) +#define CONFIG_SPL_RELOC_MALLOC_SIZE (96 << 10) +#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024) +#elif defined(CONFIG_NAND) +#ifdef CONFIG_TPL_BUILD +#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 +#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR +#define CONFIG_SYS_L2_SIZE (256 << 10) +#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) +#define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 +#define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024) +#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024) +#define CONFIG_SPL_RELOC_MALLOC_SIZE (48 << 10) +#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024) +#else +#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 +#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR +#define CONFIG_SYS_L2_SIZE (256 << 10) +#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) +#define CONFIG_SPL_RELOC_TEXT_BASE (CONFIG_SYS_INIT_L2_END - 0x2000) +#define CONFIG_SPL_RELOC_STACK ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) +#endif +#endif +#endif + +/* * Serial Port */ #define CONFIG_CONS_INDEX 1 @@ -299,7 +399,7 @@ #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) -#ifdef CONFIG_SPL_BUILD +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL) #define CONFIG_NS16550_MIN_FUNCTIONS #endif @@ -521,7 +621,7 @@ /* * Environment */ -#ifdef CONFIG_RAMBOOT_SPIFLASH +#ifdef CONFIG_SPIFLASH #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_ENV_SPI_BUS 0 #define CONFIG_ENV_SPI_CS 0 @@ -530,14 +630,20 @@ #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ #define CONFIG_ENV_SECT_SIZE 0x10000 -#elif defined(CONFIG_RAMBOOT_SDCARD) +#elif defined(CONFIG_SDCARD) #define CONFIG_ENV_IS_IN_MMC +#define CONFIG_FSL_FIXED_MMC_LOCATION #define CONFIG_ENV_SIZE 0x2000 #define CONFIG_SYS_MMC_ENV_DEV 0 #elif defined(CONFIG_NAND) -#define CONFIG_ENV_IS_IN_NAND +#ifdef CONFIG_TPL_BUILD +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10)) +#else #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) +#endif +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET (1024 * 1024) #define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) #elif defined(CONFIG_SYS_RAMBOOT) #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index 9814ca2..905bacf 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -37,7 +37,6 @@ #define CONFIG_E500MC /* BOOKE e500mc family */ #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ #define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ -#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ #define CONFIG_MP /* support multiple processors */ #ifndef CONFIG_SYS_TEXT_BASE diff --git a/include/configs/T4240EMU.h b/include/configs/T4240EMU.h new file mode 100644 index 0000000..9fa6b77 --- /dev/null +++ b/include/configs/T4240EMU.h @@ -0,0 +1,170 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * T4240 EMU board configuration file + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_T4240EMU +#define CONFIG_PHYS_64BIT + +#define CONFIG_SYS_NO_FLASH 1 +#define CONFIG_SYS_FSL_DDR_EMU 1 +#define CONFIG_SYS_FSL_NO_QIXIS 1 +#define CONFIG_SYS_FSL_NO_SERDES 1 + +#include "t4qds.h" + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_CACHE_FLUSH + +#define CONFIG_ENV_IS_NOWHERE +#define CONFIG_ENV_SIZE 0x2000 + +#define CONFIG_SYS_CLK_FREQ 100000000 +#define CONFIG_DDR_CLK_FREQ 133333333 +#define CONFIG_FSL_TBCLK_EXTRA_DIV 100 + + +/* + * DDR Setup + */ +#define CONFIG_SYS_SPD_BUS_NUM 1 +#define SPD_EEPROM_ADDRESS1 0x51 +#define SPD_EEPROM_ADDRESS2 0x52 +#define SPD_EEPROM_ADDRESS3 0x53 +#define SPD_EEPROM_ADDRESS4 0x54 +#define SPD_EEPROM_ADDRESS5 0x55 +#define SPD_EEPROM_ADDRESS6 0x56 +#define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 /* for p3041/p5010 */ +#define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ + +/* + * IFC Definitions + */ +#define CONFIG_SYS_NOR0_CSPR_EXT (0xf) +#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) +/* NOR Flash Timing Params */ +#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ + + 0x8000000) | \ + CSPR_PORT_SIZE_32 | \ + CSPR_MSEL_NOR | \ + CSPR_V) +#define CONFIG_SYS_NOR_CSOR CSOR_NOR_ADM_SHIFT(0) +#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x1) | \ + FTIM0_NOR_TEADC(0x1) | \ + FTIM0_NOR_TEAHC(0x1)) +#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x1) | \ + FTIM1_NOR_TRAD_NOR(0x1)) +#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x0) | \ + FTIM2_NOR_TCH(0x0) | \ + FTIM2_NOR_TWP(0x1)) +#define CONFIG_SYS_NOR_FTIM3 0x04000000 +#define CONFIG_SYS_IFC_CCR 0x01000000 + +#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 + + +/* I2C */ +#define CONFIG_SYS_FSL_I2C_SPEED 4000000 /* faster speed for emulator */ +#define CONFIG_SYS_FSL_I2C2_SPEED 4000000 + +/* Qman/Bman */ +#define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ +#define CONFIG_SYS_BMAN_NUM_PORTALS 50 +#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 +#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull +#define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 +#define CONFIG_SYS_QMAN_NUM_PORTALS 50 +#define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 +#define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull +#define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 + +#define CONFIG_SYS_DPAA_FMAN +#define CONFIG_SYS_DPAA_PME +#define CONFIG_SYS_PMAN +#define CONFIG_SYS_DPAA_DCE +#define CONFIG_SYS_DPAA_RMAN +#define CONFIG_SYS_INTERLAKEN + +#define CONFIG_SYS_QE_FMAN_FW_IN_NOR +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000 +#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 +#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) + + + +#define CONFIG_BOOTDELAY 0 + +/* + * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be + * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way + * interleaving. It can be cacheline, page, bank, superbank. + * See doc/README.fsl-ddr for details. + */ +#ifdef CONFIG_PPC_T4240 +#define CTRL_INTLV_PREFERED 3way_4KB +#else +#define CTRL_INTLV_PREFERED cacheline +#endif + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hwconfig=fsl_ddr:" \ + "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \ + "bank_intlv=auto;" \ + "netdev=eth0\0" \ + "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ + "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ + "consoledev=ttyS0\0" \ + "ramdiskaddr=2000000\0" \ + "ramdiskfile=t4240emu/ramdisk.uboot\0" \ + "fdtaddr=c00000\0" \ + "fdtfile=t4240emu/t4240emu.dtb\0" \ + "bdev=sda3\0" \ + "c=ffe\0" + +/* + * For emulation this causes u-boot to jump to the start of the proof point + * app code automatically + */ +#define CONFIG_PROOF_POINTS \ + "setenv bootargs root=/dev/$bdev rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "cpu 1 release 0x29000000 - - -;" \ + "cpu 2 release 0x29000000 - - -;" \ + "cpu 3 release 0x29000000 - - -;" \ + "cpu 4 release 0x29000000 - - -;" \ + "cpu 5 release 0x29000000 - - -;" \ + "cpu 6 release 0x29000000 - - -;" \ + "cpu 7 release 0x29000000 - - -;" \ + "go 0x29000000" + +#define CONFIG_HVBOOT \ + "setenv bootargs config-addr=0x60000000; " \ + "bootm 0x01000000 - 0x00f00000" + +#define CONFIG_LINUX \ + "errata;" \ + "setenv othbootargs ignore_loglevel;" \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "setenv ramdiskaddr 0x02000000;" \ + "setenv fdtaddr 0x00c00000;" \ + "setenv loadaddr 0x1000000;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_BOOTCOMMAND CONFIG_LINUX + +#endif /* __CONFIG_H */ diff --git a/include/configs/T4240QDS.h b/include/configs/T4240QDS.h index 9ac7f69..92a30ab 100644 --- a/include/configs/T4240QDS.h +++ b/include/configs/T4240QDS.h @@ -7,6 +7,9 @@ /* * T4240 QDS board configuration file */ +#ifndef __CONFIG_H +#define __CONFIG_H + #define CONFIG_T4240QDS #define CONFIG_PHYS_64BIT @@ -15,4 +18,543 @@ #define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ +#ifdef CONFIG_RAMBOOT_PBL +#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE +#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc +#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/t4qds/t4_pbi.cfg +#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/t4qds/t4_rcw.cfg +#endif + +#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE +/* Set 1M boot space */ +#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000) +#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \ + (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR) +#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc +#define CONFIG_SYS_NO_FLASH +#endif + +#define CONFIG_SRIO_PCIE_BOOT_MASTER +#define CONFIG_DDR_ECC + #include "t4qds.h" + +#ifdef CONFIG_SYS_NO_FLASH +#if !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL) +#define CONFIG_ENV_IS_NOWHERE +#endif +#else +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE +#endif + +#if defined(CONFIG_SPIFLASH) +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_CS 0 +#define CONFIG_ENV_SPI_MAX_HZ 10000000 +#define CONFIG_ENV_SPI_MODE 0 +#define CONFIG_ENV_SIZE 0x2000 /* 8KB */ +#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ +#define CONFIG_ENV_SECT_SIZE 0x10000 +#elif defined(CONFIG_SDCARD) +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_OFFSET (512 * 1097) +#elif defined(CONFIG_NAND) +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE +#define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE) +#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) +#define CONFIG_ENV_IS_IN_REMOTE +#define CONFIG_ENV_ADDR 0xffe20000 +#define CONFIG_ENV_SIZE 0x2000 +#elif defined(CONFIG_ENV_IS_NOWHERE) +#define CONFIG_ENV_SIZE 0x2000 +#else +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ +#endif + +#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() +#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() + +#ifndef __ASSEMBLY__ +unsigned long get_board_sys_clk(void); +unsigned long get_board_ddr_clk(void); +#endif + +/* EEPROM */ +#define CONFIG_ID_EEPROM +#define CONFIG_SYS_I2C_EEPROM_NXID +#define CONFIG_SYS_EEPROM_BUS_NUM 0 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 + +/* + * DDR Setup + */ +#define CONFIG_SYS_SPD_BUS_NUM 0 +#define SPD_EEPROM_ADDRESS1 0x51 +#define SPD_EEPROM_ADDRESS2 0x52 +#define SPD_EEPROM_ADDRESS3 0x53 +#define SPD_EEPROM_ADDRESS4 0x54 +#define SPD_EEPROM_ADDRESS5 0x55 +#define SPD_EEPROM_ADDRESS6 0x56 +#define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 /* for p3041/p5010 */ +#define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ + +/* + * IFC Definitions + */ +#define CONFIG_SYS_NOR0_CSPR_EXT (0xf) +#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ + + 0x8000000) | \ + CSPR_PORT_SIZE_16 | \ + CSPR_MSEL_NOR | \ + CSPR_V) +#define CONFIG_SYS_NOR1_CSPR_EXT (0xf) +#define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ + CSPR_PORT_SIZE_16 | \ + CSPR_MSEL_NOR | \ + CSPR_V) +#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) +/* NOR Flash Timing Params */ +#define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 + +#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ + FTIM0_NOR_TEADC(0x5) | \ + FTIM0_NOR_TEAHC(0x5)) +#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ + FTIM1_NOR_TRAD_NOR(0x1A) |\ + FTIM1_NOR_TSEQRAD_NOR(0x13)) +#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ + FTIM2_NOR_TCH(0x4) | \ + FTIM2_NOR_TWPH(0x0E) | \ + FTIM2_NOR_TWP(0x1c)) +#define CONFIG_SYS_NOR_FTIM3 0x0 + +#define CONFIG_SYS_FLASH_QUIET_TEST +#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ + +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \ + + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} + +#define CONFIG_FSL_QIXIS /* use common QIXIS code */ +#define QIXIS_BASE 0xffdf0000 +#define QIXIS_LBMAP_SWITCH 6 +#define QIXIS_LBMAP_MASK 0x0f +#define QIXIS_LBMAP_SHIFT 0 +#define QIXIS_LBMAP_DFLTBANK 0x00 +#define QIXIS_LBMAP_ALTBANK 0x04 +#define QIXIS_RST_CTL_RESET 0x83 +#define QIXIS_RST_FORCE_MEM 0x1 +#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 +#define QIXIS_RCFG_CTL_RECONFIG_START 0x21 +#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 +#define QIXIS_BASE_PHYS (0xf00000000ull | QIXIS_BASE) + +#define CONFIG_SYS_CSPR3_EXT (0xf) +#define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \ + | CSPR_PORT_SIZE_8 \ + | CSPR_MSEL_GPCM \ + | CSPR_V) +#define CONFIG_SYS_AMASK3 IFC_AMASK(4*1024) +#define CONFIG_SYS_CSOR3 0x0 +/* QIXIS Timing parameters for IFC CS3 */ +#define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ + FTIM0_GPCM_TEADC(0x0e) | \ + FTIM0_GPCM_TEAHC(0x0e)) +#define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ + FTIM1_GPCM_TRAD(0x3f)) +#define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ + FTIM2_GPCM_TCH(0x0) | \ + FTIM2_GPCM_TWP(0x1f)) +#define CONFIG_SYS_CS3_FTIM3 0x0 + +/* NAND Flash on IFC */ +#define CONFIG_NAND_FSL_IFC +#define CONFIG_SYS_NAND_BASE 0xff800000 +#define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) + +#define CONFIG_SYS_NAND_CSPR_EXT (0xf) +#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ + | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ + | CSPR_MSEL_NAND /* MSEL = NAND */ \ + | CSPR_V) +#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) + +#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ + | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ + | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ + | CSOR_NAND_RAL_3 /* RAL = 2Byes */ \ + | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ + | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \ + | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ + +#define CONFIG_SYS_NAND_ONFI_DETECTION + +/* ONFI NAND Flash mode0 Timing Params */ +#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ + FTIM0_NAND_TWP(0x18) | \ + FTIM0_NAND_TWCHT(0x07) | \ + FTIM0_NAND_TWH(0x0a)) +#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ + FTIM1_NAND_TWBE(0x39) | \ + FTIM1_NAND_TRR(0x0e) | \ + FTIM1_NAND_TRP(0x18)) +#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ + FTIM2_NAND_TREH(0x0a) | \ + FTIM2_NAND_TWHRE(0x1e)) +#define CONFIG_SYS_NAND_FTIM3 0x0 + +#define CONFIG_SYS_NAND_DDR_LAW 11 + +#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_MTD_NAND_VERIFY_WRITE +#define CONFIG_CMD_NAND + +#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) + +#if defined(CONFIG_NAND) +#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 +#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR0_CSPR_EXT +#define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR0_CSPR +#define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 +#else +#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 +#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT +#define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR +#define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK +#define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR +#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0 +#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1 +#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2 +#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 +#endif +#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT +#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR +#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 + +#if defined(CONFIG_RAMBOOT_PBL) +#define CONFIG_SYS_RAMBOOT +#endif + + +/* I2C */ +#define CONFIG_SYS_FSL_I2C_SPEED 100000 /* I2C speed */ +#define CONFIG_SYS_FSL_I2C2_SPEED 100000 /* I2C2 speed */ +#define I2C_MUX_PCA_ADDR_PRI 0x77 /* I2C bus multiplexer,primary */ +#define I2C_MUX_PCA_ADDR_SEC 0x76 /* I2C bus multiplexer,secondary */ + +#define I2C_MUX_CH_DEFAULT 0x8 +#define I2C_MUX_CH_VOL_MONITOR 0xa +#define I2C_MUX_CH_VSC3316_FS 0xc +#define I2C_MUX_CH_VSC3316_BS 0xd + +/* Voltage monitor on channel 2*/ +#define I2C_VOL_MONITOR_ADDR 0x40 +#define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 +#define I2C_VOL_MONITOR_BUS_V_OVF 0x1 +#define I2C_VOL_MONITOR_BUS_V_SHIFT 3 + +/* VSC Crossbar switches */ +#define CONFIG_VSC_CROSSBAR +#define VSC3316_FSM_TX_ADDR 0x70 +#define VSC3316_FSM_RX_ADDR 0x71 + +/* + * RapidIO + */ + +/* + * for slave u-boot IMAGE instored in master memory space, + * PHYS must be aligned based on the SIZE + */ +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x80000 /* 512K */ +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff80000ull +/* + * for slave UCODE and ENV instored in master memory space, + * PHYS must be aligned based on the SIZE + */ +#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef040000ull +#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull +#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ + +/* slave core release by master*/ +#define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4 +#define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */ + +/* + * SRIO_PCIE_BOOT - SLAVE + */ +#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE +#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000 +#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \ + (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR) +#endif +/* + * eSPI - Enhanced SPI + */ +#define CONFIG_FSL_ESPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_SST +#define CONFIG_CMD_SF +#define CONFIG_SF_DEFAULT_SPEED 10000000 +#define CONFIG_SF_DEFAULT_MODE 0 + + +/* Qman/Bman */ +#ifndef CONFIG_NOBQFMAN +#define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ +#define CONFIG_SYS_BMAN_NUM_PORTALS 50 +#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 +#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull +#define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 +#define CONFIG_SYS_QMAN_NUM_PORTALS 50 +#define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 +#define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull +#define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 + +#define CONFIG_SYS_DPAA_FMAN +#define CONFIG_SYS_DPAA_PME +#define CONFIG_SYS_PMAN +#define CONFIG_SYS_DPAA_DCE +#define CONFIG_SYS_DPAA_RMAN +#define CONFIG_SYS_INTERLAKEN + +/* Default address of microcode for the Linux Fman driver */ +#if defined(CONFIG_SPIFLASH) +/* + * env is stored at 0x100000, sector size is 0x10000, ucode is stored after + * env, so we got 0x110000. + */ +#define CONFIG_SYS_QE_FW_IN_SPIFLASH +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0x110000 +#elif defined(CONFIG_SDCARD) +/* + * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is + * about 545KB (1089 blocks), Env is stored after the image, and the env size is + * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130. + */ +#define CONFIG_SYS_QE_FMAN_FW_IN_MMC +#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1130) +#elif defined(CONFIG_NAND) +#define CONFIG_SYS_QE_FMAN_FW_IN_NAND +#define CONFIG_SYS_QE_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE) +#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) +/* + * Slave has no ucode locally, it can fetch this from remote. When implementing + * in two corenet boards, slave's ucode could be stored in master's memory + * space, the address can be mapped from slave TLB->slave LAW-> + * slave SRIO or PCIE outbound window->master inbound window-> + * master LAW->the ucode address in master's memory space. + */ +#define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xFFE00000 +#else +#define CONFIG_SYS_QE_FMAN_FW_IN_NOR +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000 +#endif +#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 +#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) +#endif /* CONFIG_NOBQFMAN */ + +#ifdef CONFIG_SYS_DPAA_FMAN +#define CONFIG_FMAN_ENET +#define CONFIG_PHYLIB_10G +#define CONFIG_PHY_VITESSE +#define CONFIG_PHY_TERANETICS +#define SGMII_CARD_PORT1_PHY_ADDR 0x1C +#define SGMII_CARD_PORT2_PHY_ADDR 0x1D +#define SGMII_CARD_PORT3_PHY_ADDR 0x1E +#define SGMII_CARD_PORT4_PHY_ADDR 0x1F +#define FM1_10GEC1_PHY_ADDR 0x0 +#define FM1_10GEC2_PHY_ADDR 0x1 +#define FM2_10GEC1_PHY_ADDR 0x2 +#define FM2_10GEC2_PHY_ADDR 0x3 +#endif + + +/* SATA */ +#ifdef CONFIG_FSL_SATA_V2 +#define CONFIG_LIBATA +#define CONFIG_FSL_SATA + +#define CONFIG_SYS_SATA_MAX_DEVICE 2 +#define CONFIG_SATA1 +#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR +#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA +#define CONFIG_SATA2 +#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR +#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA + +#define CONFIG_LBA48 +#define CONFIG_CMD_SATA +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_EXT2 +#endif + +#ifdef CONFIG_FMAN_ENET +#define CONFIG_MII /* MII PHY management */ +#define CONFIG_ETHPRIME "FM1@DTSEC1" +#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ +#endif + +/* +* USB +*/ +#define CONFIG_CMD_USB +#define CONFIG_USB_STORAGE +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_FSL +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_CMD_EXT2 +#define CONFIG_HAS_FSL_DR_USB + +#define CONFIG_MMC + +#ifdef CONFIG_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR +#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#endif + +#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ + +#define __USB_PHY_TYPE utmi + +/* + * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be + * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way + * interleaving. It can be cacheline, page, bank, superbank. + * See doc/README.fsl-ddr for details. + */ +#ifdef CONFIG_PPC_T4240 +#define CTRL_INTLV_PREFERED 3way_4KB +#else +#define CTRL_INTLV_PREFERED cacheline +#endif + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hwconfig=fsl_ddr:" \ + "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \ + "bank_intlv=auto;" \ + "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ + "netdev=eth0\0" \ + "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ + "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ + "tftpflash=tftpboot $loadaddr $uboot && " \ + "protect off $ubootaddr +$filesize && " \ + "erase $ubootaddr +$filesize && " \ + "cp.b $loadaddr $ubootaddr $filesize && " \ + "protect on $ubootaddr +$filesize && " \ + "cmp.b $loadaddr $ubootaddr $filesize\0" \ + "consoledev=ttyS0\0" \ + "ramdiskaddr=2000000\0" \ + "ramdiskfile=t4240qds/ramdisk.uboot\0" \ + "fdtaddr=c00000\0" \ + "fdtfile=t4240qds/t4240qds.dtb\0" \ + "bdev=sda3\0" \ + "c=ffe\0" + +#define CONFIG_HVBOOT \ + "setenv bootargs config-addr=0x60000000; " \ + "bootm 0x01000000 - 0x00f00000" + +#define CONFIG_ALU \ + "setenv bootargs root=/dev/$bdev rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "cpu 1 release 0x01000000 - - -;" \ + "cpu 2 release 0x01000000 - - -;" \ + "cpu 3 release 0x01000000 - - -;" \ + "cpu 4 release 0x01000000 - - -;" \ + "cpu 5 release 0x01000000 - - -;" \ + "cpu 6 release 0x01000000 - - -;" \ + "cpu 7 release 0x01000000 - - -;" \ + "go 0x01000000" + +#define CONFIG_LINUX \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "setenv ramdiskaddr 0x02000000;" \ + "setenv fdtaddr 0x00c00000;" \ + "setenv loadaddr 0x1000000;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_HDBOOT \ + "setenv bootargs root=/dev/$bdev rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_BOOTCOMMAND CONFIG_LINUX + +#ifdef CONFIG_SECURE_BOOT +#include <asm/fsl_secure_boot.h> +#endif + +#endif /* __CONFIG_H */ diff --git a/include/configs/a3m071.h b/include/configs/a3m071.h index b18a3fa..43d3d99 100644 --- a/include/configs/a3m071.h +++ b/include/configs/a3m071.h @@ -31,6 +31,8 @@ #define CONFIG_HOSTNAME a3m071 #endif +#define CONFIG_BOOTCOUNT_LIMIT + /* * Serial console configuration */ @@ -65,7 +67,8 @@ #define CONFIG_FLASH_CFI_MTD #define MTDIDS_DEFAULT "nor0=fc000000.flash" #define MTDPARTS_DEFAULT "mtdparts=fc000000.flash:512k(u-boot)," \ - "256k(env)," \ + "128k(env1)," \ + "128k(env2)," \ "128k(hwinfo)," \ "1M(nvramsim)," \ "128k(dtb)," \ @@ -73,7 +76,9 @@ "128k(sysinfo)," \ "7552k(root)," \ "4M(app)," \ - "13568k(data)" + "5376k(data)," \ + "8M(install)" + #define CONFIG_LZO /* needed for UBI */ #define CONFIG_RBTREE /* needed for UBI */ #define CONFIG_CMD_MTDPARTS @@ -367,7 +372,7 @@ "nfsargs=setenv bootargs root=/dev/nfs rw " \ "nfsroot=${serverip}:${rootpath}\0" \ "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "mtdargs=setenv bootargs root=/dev/mtdblock7 " \ + "mtdargs=setenv bootargs root=/dev/mtdblock8 " \ "rootfstype=squashfs,jffs2\0" \ "addhost=setenv bootargs ${bootargs} " \ "hostname=${hostname}\0" \ @@ -376,22 +381,32 @@ ":${hostname}:${netdev}:off panic=1\0" \ "addtty=setenv bootargs ${bootargs} " \ "console=${consoledev},${baudrate}\0" \ - "flash_nfs=run nfsargs addip addtty addhost;" \ + "flash_nfs=run nfsargs addip addtty addmtd addhost;" \ "bootm ${kernel_addr} - ${fdt_addr}\0" \ - "flash_mtd=run mtdargs addip addtty addhost;" \ + "flash_mtd=run mtdargs addip addtty addmtd addhost;" \ "bootm ${kernel_addr} - ${fdt_addr}\0" \ - "flash_self=run ramargs addip addtty addhost;" \ + "flash_self=run ramargs addip addtty addmtd addhost;" \ "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \ "tftp ${fdt_addr_r} ${fdtfile};" \ - "run nfsargs addip addtty addhost;" \ + "run nfsargs addip addtty addmtd addhost;" \ "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ "load=tftp ${loadaddr} " __stringify(CONFIG_HOSTNAME) \ "/u-boot-img.bin\0" \ - "update=protect off fc000000 fc07ffff; " \ + "update=protect off fc000000 fc07ffff;" \ "era fc000000 fc07ffff;" \ "cp.b ${loadaddr} fc000000 ${filesize}\0" \ "upd=run load;run update\0" \ + "upd_fdt=tftp 1800000 a3m071/a3m071.dtb;" \ + "run mtdargs addip addtty addmtd addhost;" \ + "fdt addr 1800000;fdt boardsetup;fdt chosen;" \ + "erase fc1e0000 fc1fffff;cp.b 1800000 fc1e0000 20000" \ + "upd_kernel=tftp 1000000 a3m071/uImage-uncompressed;" \ + "erase fc200000 fc6fffff;" \ + "cp.b 1000000 fc200000 ${filesize}" \ + "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ + "mtdids=" MTDIDS_DEFAULT "\0" \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_mtd" diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index e32066d..eae5a19 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -16,43 +16,20 @@ #ifndef __CONFIG_AM335X_EVM_H #define __CONFIG_AM335X_EVM_H -#define CONFIG_AM33XX -#define CONFIG_OMAP +#include <configs/ti_am335x_common.h> -#include <asm/arch/omap.h> - -#define CONFIG_DMA_COHERENT -#define CONFIG_DMA_COHERENT_SIZE (1 << 20) - -#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ -#define CONFIG_SYS_MALLOC_LEN (1024 << 10) -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_PROMPT "U-Boot# " -#define CONFIG_BOARD_LATE_INIT -#define CONFIG_SYS_NO_FLASH #define MACH_TYPE_TIAM335EVM 3589 /* Until the next sync */ #define CONFIG_MACH_TYPE MACH_TYPE_TIAM335EVM -#define CONFIG_OF_LIBFDT -#define CONFIG_CMD_BOOTZ -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_CMDLINE_EDITING -#define CONFIG_STACKSIZE (128 * 1024) -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG +/* Clock Defines */ +#define V_OSCK 24000000 /* Clock output from T2 */ +#define V_SCLK (V_OSCK) /* Custom script for NOR */ #define CONFIG_SYS_LDSCRIPT "board/ti/am335x/u-boot.lds" -#define CONFIG_SYS_CACHELINE_SIZE 64 - -/* commands to include */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ASKENV -#define CONFIG_VERSION_VARIABLE +/* Always 128 KiB env size */ +#define CONFIG_ENV_SIZE (128 << 10) #ifdef CONFIG_NAND #define NANDARGS \ @@ -75,15 +52,14 @@ #define NANDARGS "" #endif -/* set to negative value for no autoboot */ -#define CONFIG_BOOTDELAY 1 -#define CONFIG_ENV_VARS_UBOOT_CONFIG #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + #ifndef CONFIG_SPL_BUILD #define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x80200000\0" \ "fdtaddr=0x80F80000\0" \ "fdt_high=0xffffffff\0" \ + "boot_fdt=try\0" \ "rdaddr=0x81000000\0" \ "bootdir=/boot\0" \ "bootfile=uImage\0" \ @@ -131,6 +107,20 @@ "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \ "loaduimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ + "mmcloados=run mmcargs; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if run loadfdt; then " \ + "bootm ${loadaddr} - ${fdtaddr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootm; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootm; " \ + "fi;\0" \ "mmcboot=mmc dev ${mmcdev}; " \ "if mmc rescan; then " \ "echo SD/MMC found on device ${mmcdev};" \ @@ -142,11 +132,7 @@ "echo Running uenvcmd ...;" \ "run uenvcmd;" \ "fi;" \ - "if run loaduimage; then " \ - "run loadfdt;" \ - "run mmcargs; " \ - "bootm ${loadaddr} - ${fdtaddr};" \ - "fi;" \ + "run mmcloados;" \ "fi;\0" \ "spiboot=echo Booting from spi ...; " \ "run spiargs; " \ @@ -185,220 +171,48 @@ "run mmcboot;" \ "run nandboot;" -/* Clock Defines */ -#define V_OSCK 24000000 /* Clock output from T2 */ -#define V_SCLK (V_OSCK) - -#define CONFIG_CMD_ECHO - -/* We set the max number of command args high to avoid HUSH bugs. */ -#define CONFIG_SYS_MAXARGS 64 - -/* Console I/O Buffer Size */ -#define CONFIG_SYS_CBSIZE 512 - -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ - + sizeof(CONFIG_SYS_PROMPT) + 16) - -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -/* - * memtest works on 8 MB in DRAM after skipping 32MB from - * start addr of ram disk - */ -#define CONFIG_SYS_MEMTEST_START (PHYS_DRAM_1 + (64 * 1024 * 1024)) -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START \ - + (8 * 1024 * 1024)) - -#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */ - -#define CONFIG_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_OMAP_HSMMC -#define CONFIG_CMD_MMC -#define CONFIG_DOS_PARTITION -#define CONFIG_CMD_FAT -#define CONFIG_FAT_WRITE -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_EXT4 -#define CONFIG_CMD_FS_GENERIC - -#define CONFIG_SPI -#define CONFIG_OMAP3_SPI -#define CONFIG_MTD_DEVICE -#define CONFIG_SPI_FLASH -#define CONFIG_SPI_FLASH_WINBOND -#define CONFIG_CMD_SF -#define CONFIG_SF_DEFAULT_SPEED (24000000) - -/* USB Composite download gadget - g_dnl */ -#define CONFIG_USB_GADGET -#define CONFIG_USBDOWNLOAD_GADGET - -/* USB TI's IDs */ -#define CONFIG_USBD_HS -#define CONFIG_G_DNL_VENDOR_NUM 0x0403 -#define CONFIG_G_DNL_PRODUCT_NUM 0xBD00 -#define CONFIG_G_DNL_MANUFACTURER "Texas Instruments" - -/* USB Device Firmware Update support */ -#define CONFIG_DFU_FUNCTION -#define CONFIG_DFU_MMC -#define CONFIG_CMD_DFU -#define DFU_ALT_INFO_MMC \ - "boot part 0 1;" \ - "rootfs part 0 2;" \ - "MLO fat 0 1;" \ - "MLO.raw mmc 100 100;" \ - "u-boot.img.raw mmc 300 400;" \ - "spl-os-args.raw mmc 80 80;" \ - "spl-os-image.raw mmc 900 2000;" \ - "spl-os-args fat 0 1;" \ - "spl-os-image fat 0 1;" \ - "u-boot.img fat 0 1;" \ - "uEnv.txt fat 0 1" -#ifdef CONFIG_NAND -#define CONFIG_DFU_NAND -#define DFU_ALT_INFO_NAND \ - "SPL part 0 1;" \ - "SPL.backup1 part 0 2;" \ - "SPL.backup2 part 0 3;" \ - "SPL.backup3 part 0 4;" \ - "u-boot part 0 5;" \ - "u-boot-spl-os part 0 6;" \ - "kernel part 0 8;" \ - "rootfs part 0 9" -#endif - - /* Physical Memory Map */ -#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ -#define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */ -#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ - -#define CONFIG_SYS_SDRAM_BASE PHYS_DRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ - GENERATED_GBL_DATA_SIZE) - /* Platform/Board specific defs */ -#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ -#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 /* 1ms clock */ - /* NS16550 Configuration */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK (48000000) #define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */ #define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */ #define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */ #define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */ #define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */ #define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */ +#define CONFIG_BAUDRATE 115200 /* I2C Configuration */ -#define CONFIG_I2C -#define CONFIG_CMD_I2C -#define CONFIG_HARD_I2C -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 1 -#define CONFIG_I2C_MULTI_BUS -#define CONFIG_DRIVER_OMAP24XX_I2C #define CONFIG_CMD_EEPROM #define CONFIG_ENV_EEPROM_IS_ON_I2C #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 #define CONFIG_SYS_I2C_MULTI_EEPROMS -#define CONFIG_OMAP_GPIO - -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 110, 300, 600, 1200, 2400, \ -4800, 9600, 14400, 19200, 28800, 38400, 56000, 57600, 115200 } - -/* CPU */ -#define CONFIG_ARCH_CPU_INIT - -#define CONFIG_ENV_OVERWRITE 1 -#define CONFIG_SYS_CONSOLE_INFO_QUIET - +/* SPL */ #ifndef CONFIG_NOR_BOOT -/* Defines for SPL */ -#define CONFIG_SPL -#define CONFIG_SPL_FRAMEWORK -/* - * Place the image at the start of the ROM defined image space. - * We limit our size to the ROM-defined downloaded image area, and use the - * rest of the space for stack. - */ -#define CONFIG_SPL_TEXT_BASE 0x402F0400 -#define CONFIG_SPL_MAX_SIZE (0x4030C000 - CONFIG_SPL_TEXT_BASE) -#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR - -#define CONFIG_SPL_OS_BOOT - -#define CONFIG_SPL_BSS_START_ADDR 0x80a00000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ - -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ -#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 -#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" - -#ifdef CONFIG_SPL_OS_BOOT -/* fat */ -#define CONFIG_SPL_FAT_LOAD_KERNEL_NAME "uImage" -#define CONFIG_SPL_FAT_LOAD_ARGS_NAME "args" -#define CONFIG_SYS_SPL_ARGS_ADDR (PHYS_DRAM_1 + 0x100) - -/* raw mmc */ -#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x900 /* address 0x120000 */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x80 /* address 0x10000 */ -#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0x80 /* 64KiB */ - -/* nand */ -#ifdef CONFIG_NAND -#define CONFIG_CMD_SPL_NAND_OFS 0x240000 /* end of u-boot */ -#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 -#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 -#endif +#define CONFIG_SPL_YMODEM_SUPPORT -/* spl export command */ -#define CONFIG_CMD_SPL -#endif +/* CPSW support */ +#define CONFIG_SPL_ETH_SUPPORT -#define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SPL_FAT_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT +/* USB gadget RNDIS */ +#define CONFIG_SPL_MUSB_NEW_SUPPORT -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBDISK_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_GPIO_SUPPORT -#define CONFIG_SPL_YMODEM_SUPPORT +/* General network SPL, both CPSW and USB gadget RNDIS */ #define CONFIG_SPL_NET_SUPPORT #define CONFIG_SPL_ENV_SUPPORT #define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL" -#define CONFIG_SPL_ETH_SUPPORT + +/* SPI flash. */ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SPL_SPI_BUS 0 #define CONFIG_SPL_SPI_CS 0 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 -#define CONFIG_SPL_MUSB_NEW_SUPPORT -#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds" -#define CONFIG_SPL_BOARD_INIT +#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds" #ifdef CONFIG_NAND -#define CONFIG_SPL_NAND_AM33XX_BCH -#define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_NAND_BASE -#define CONFIG_SPL_NAND_DRIVERS -#define CONFIG_SPL_NAND_ECC #define CONFIG_SYS_NAND_5_ADDR_CYCLE #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ CONFIG_SYS_NAND_PAGE_SIZE) @@ -418,40 +232,32 @@ #define CONFIG_SYS_NAND_ECCBYTES 14 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE - #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 #endif #endif /* - * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM - * 64 bytes before this address should be set aside for u-boot.img's - * header. That is 0x800FFFC0--0x80100000 should not be used for any - * other needs. + * For NOR boot, we must set this to the start of where NOR is mapped + * in memory. */ #ifdef CONFIG_NOR_BOOT #define CONFIG_SYS_TEXT_BASE 0x08000000 -#else -#define CONFIG_SYS_TEXT_BASE 0x80800000 -#endif -#define CONFIG_SYS_SPL_MALLOC_START 0x80a08000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 - -/* Since SPL did pll and ddr initialization for us, - * we don't need to do it twice. - */ -#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_NOR_BOOT) -#define CONFIG_SKIP_LOWLEVEL_INIT #endif /* - * USB configuration + * USB configuration. We enable MUSB support, both for host and for + * gadget. We set USB0 as peripheral and USB1 as host, based on the + * board schematic and physical port wired to each. Then for host we + * add mass storage support and for gadget we add both RNDIS ethernet + * and DFU. */ #define CONFIG_USB_MUSB_DSPS #define CONFIG_ARCH_MISC_INIT #define CONFIG_MUSB_GADGET #define CONFIG_MUSB_PIO_ONLY #define CONFIG_MUSB_DISABLE_BULK_COMBINE_SPLIT +#define CONFIG_USB_GADGET +#define CONFIG_USBDOWNLOAD_GADGET #define CONFIG_USB_GADGET_DUALSPEED #define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_MUSB_HOST @@ -469,6 +275,11 @@ #define CONFIG_USB_ETHER #define CONFIG_USB_ETH_RNDIS #define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00" + +/* USB TI's IDs */ +#define CONFIG_G_DNL_VENDOR_NUM 0x0403 +#define CONFIG_G_DNL_PRODUCT_NUM 0xBD00 +#define CONFIG_G_DNL_MANUFACTURER "Texas Instruments" #endif /* CONFIG_MUSB_GADGET */ #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT) @@ -480,6 +291,35 @@ #undef CONFIG_SPL_ETH_SUPPORT #endif +/* USB Device Firmware Update support */ +#define CONFIG_DFU_FUNCTION +#define CONFIG_DFU_MMC +#define CONFIG_CMD_DFU +#define DFU_ALT_INFO_MMC \ + "boot part 0 1;" \ + "rootfs part 0 2;" \ + "MLO fat 0 1;" \ + "MLO.raw mmc 100 100;" \ + "u-boot.img.raw mmc 300 400;" \ + "spl-os-args.raw mmc 80 80;" \ + "spl-os-image.raw mmc 900 2000;" \ + "spl-os-args fat 0 1;" \ + "spl-os-image fat 0 1;" \ + "u-boot.img fat 0 1;" \ + "uEnv.txt fat 0 1" +#ifdef CONFIG_NAND +#define CONFIG_DFU_NAND +#define DFU_ALT_INFO_NAND \ + "SPL part 0 1;" \ + "SPL.backup1 part 0 2;" \ + "SPL.backup2 part 0 3;" \ + "SPL.backup3 part 0 4;" \ + "u-boot part 0 5;" \ + "u-boot-spl-os part 0 6;" \ + "kernel part 0 8;" \ + "rootfs part 0 9" +#endif + /* * Default to using SPI for environment, etc. * 0x000000 - 0x020000 : SPL (128KiB) @@ -496,7 +336,6 @@ #define CONFIG_ENV_SECT_SIZE (4 << 10) /* 4 KB sectors */ #define CONFIG_ENV_OFFSET (768 << 10) /* 768 KiB in */ #define CONFIG_ENV_OFFSET_REDUND (896 << 10) /* 896 KiB in */ -#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=m25p80-flash.0" #define MTDPARTS_DEFAULT "mtdparts=m25p80-flash.0:128k(SPL)," \ "512k(u-boot),128k(u-boot-env1)," \ @@ -509,22 +348,13 @@ #define CONFIG_SYS_MMC_ENV_PART 2 #endif -/* Unsupported features */ -#undef CONFIG_USE_IRQ - -#define CONFIG_CMD_NET -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING -#define CONFIG_DRIVER_TI_CPSW -#define CONFIG_MII -#define CONFIG_BOOTP_DEFAULT -#define CONFIG_BOOTP_DNS -#define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_NET_RETRY_COUNT 10 -#define CONFIG_NET_MULTI +/* SPI flash. */ +#define CONFIG_CMD_SF +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_WINBOND +#define CONFIG_SF_DEFAULT_SPEED 24000000 + +/* Network. */ #define CONFIG_PHY_GIGE #define CONFIG_PHYLIB #define CONFIG_PHY_ADDR 0 @@ -533,14 +363,7 @@ /* NAND support */ #ifdef CONFIG_NAND #define CONFIG_CMD_NAND -#define CONFIG_CMD_MTDPARTS -#define CONFIG_NAND_OMAP_GPMC #define GPMC_NAND_ECC_LP_x16_LAYOUT 1 -#define CONFIG_SYS_NAND_BASE (0x08000000) /* physical address */ - /* to access nand at */ - /* CS0 */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND - devices */ #if !defined(CONFIG_SPI_BOOT) && !defined(CONFIG_NOR_BOOT) #define MTDIDS_DEFAULT "nand0=omap2-nand.0" #define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:128k(SPL)," \ @@ -569,6 +392,7 @@ */ #if defined(CONFIG_NOR) #undef CONFIG_SYS_NO_FLASH +#define CONFIG_CMD_FLASH #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE #define CONFIG_SYS_FLASH_PROTECTION #define CONFIG_SYS_FLASH_CFI @@ -584,7 +408,6 @@ #define CONFIG_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ #define CONFIG_ENV_OFFSET (512 << 10) /* 512 KiB */ #define CONFIG_ENV_OFFSET_REDUND (768 << 10) /* 768 KiB */ -#define CONFIG_CMD_MTDPARTS #define MTDIDS_DEFAULT "nor0=physmap-flash.0" #define MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:" \ "512k(u-boot)," \ @@ -592,8 +415,6 @@ "128k(u-boot-env2)," \ "4m(kernel),-(rootfs)" #endif -#define CONFIG_MTD_DEVICE -#define CONFIG_CMD_FLASH #endif /* NOR support */ #endif /* ! __CONFIG_AM335X_EVM_H */ diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h index 9bf283a..1fd2508 100644 --- a/include/configs/am3517_crane.h +++ b/include/configs/am3517_crane.h @@ -19,6 +19,7 @@ #define CONFIG_OMAP 1 /* in a TI OMAP core */ #define CONFIG_OMAP34XX 1 /* which is a 34XX */ #define CONFIG_OMAP3_AM3517CRANE 1 /* working with CRANEBOARD */ +#define CONFIG_OMAP_COMMON #define CONFIG_EMIF4 /* The chip has EMIF4 controller */ diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index 5c61697..6500878 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -19,6 +19,7 @@ #define CONFIG_OMAP 1 /* in a TI OMAP core */ #define CONFIG_OMAP34XX 1 /* which is a 34XX */ #define CONFIG_OMAP3_AM3517EVM 1 /* working with AM3517EVM */ +#define CONFIG_OMAP_COMMON #define CONFIG_EMIF4 /* The chip has EMIF4 controller */ diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h new file mode 100644 index 0000000..5c802a1 --- /dev/null +++ b/include/configs/am43xx_evm.h @@ -0,0 +1,135 @@ +/* + * am43xx_evm.h + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_AM43XX_EVM_H +#define __CONFIG_AM43XX_EVM_H + +#define CONFIG_AM43XX +#define CONFIG_OMAP +#define CONFIG_OMAP_COMMON + +#include <asm/arch/omap.h> + +#define CONFIG_DMA_COHERENT +#define CONFIG_DMA_COHERENT_SIZE (1 << 20) + +#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ +#define CONFIG_SYS_MALLOC_LEN (1024 << 10) +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT "U-Boot# " +#define CONFIG_SYS_NO_FLASH + +#define CONFIG_OF_LIBFDT +#define CONFIG_CMD_BOOTZ +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_CMDLINE_EDITING +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG + +/* commands to include */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_VERSION_VARIABLE + +/* set to negative value for no autoboot */ +#define CONFIG_BOOTDELAY 1 +#define CONFIG_ENV_VARS_UBOOT_CONFIG +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + +/* Clock Defines */ +#define V_OSCK 24000000 /* Clock output from T2 */ +#define V_SCLK (V_OSCK) + +#define CONFIG_CMD_ECHO + +/* max number of command args */ +#define CONFIG_SYS_MAXARGS 64 + +/* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 512 + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ + + sizeof(CONFIG_SYS_PROMPT) + 16) + +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + + /* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ +#define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */ +#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ + +#define CONFIG_SYS_SDRAM_BASE PHYS_DRAM_1 +#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ + GENERATED_GBL_DATA_SIZE) +/* Platform/Board specific defs */ +#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */ + +#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ +#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ +#define CONFIG_SYS_HZ 1000 + +/* NS16550 Configuration */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK (48000000) +#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */ + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 110, 300, 600, 1200, 2400, \ +4800, 9600, 14400, 19200, 28800, 38400, 56000, 57600, 115200 } + +/* CPU */ +#define CONFIG_ARCH_CPU_INIT + +#define CONFIG_ENV_OVERWRITE 1 +#define CONFIG_SYS_CONSOLE_INFO_QUIET + +#define CONFIG_ENV_IS_NOWHERE + +/* + * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM + * 64 bytes before this address should be set aside for u-boot.img's + * header. That is 0x800FFFC0--0x80100000 should not be used for any + * other needs. + */ +#define CONFIG_SYS_TEXT_BASE 0x80800000 + +#ifndef CONFIG_SPL_BUILD +#define CONFIG_SKIP_LOWLEVEL_INIT +#endif + +/* Defines for SPL */ +#define CONFIG_SPL +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_TEXT_BASE 0x402F0400 +#define CONFIG_SPL_MAX_SIZE (101 * 1024) +#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR + +#define CONFIG_SPL_BSS_START_ADDR 0x80a00000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBDISK_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_YMODEM_SUPPORT +#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" + +#define CONFIG_SPL_BOARD_INIT +#define CONFIG_SYS_SPL_MALLOC_START 0x80a08000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 + +/* Unsupported features */ +#undef CONFIG_USE_IRQ + +#endif /* __CONFIG_AM43XX_EVM_H */ diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index 2aea555..fc4ecec 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -13,6 +13,8 @@ #include <asm/hardware.h> +#define CONFIG_SYS_TEXT_BASE 0x73f00000 + #define CONFIG_AT91_LEGACY #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h index be8a28c..28a7925 100644 --- a/include/configs/at91sam9n12ek.h +++ b/include/configs/at91sam9n12ek.h @@ -122,6 +122,9 @@ #define CONFIG_PMECC_CAP 2 #define CONFIG_PMECC_SECTOR_SIZE 512 #define CONFIG_PMECC_INDEX_TABLE_OFFSET 0x8000 + +#define CONFIG_CMD_NAND_TRIMFFS + #endif #define CONFIG_MTD_PARTITIONS diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index 2b1533c..4a2ac9a 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -11,6 +11,8 @@ #include <asm/hardware.h> +#define CONFIG_SYS_TEXT_BASE 0x26f00000 + /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */ @@ -121,7 +123,8 @@ #define CONFIG_ATMEL_NAND_HW_PMECC 1 #define CONFIG_PMECC_CAP 2 #define CONFIG_PMECC_SECTOR_SIZE 512 -#define CONFIG_PMECC_INDEX_TABLE_OFFSET 0x8000 + +#define CONFIG_CMD_NAND_TRIMFFS #define CONFIG_MTD_DEVICE #define CONFIG_CMD_MTDPARTS diff --git a/include/configs/blackstamp.h b/include/configs/blackstamp.h index 7d82275..5b3aac7 100644 --- a/include/configs/blackstamp.h +++ b/include/configs/blackstamp.h @@ -206,8 +206,8 @@ #ifdef CONFIG_SYS_I2C_SOFT #define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF9 #define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF8 -#define CONFIG_SYS_SOFT_I2C_SPEED 50000 -#define CONFIG_SYS_SOFT_I2C_SLAVE 0xFE +#define CONFIG_SYS_I2C_SOFT_SPEED 50000 +#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE #endif /* diff --git a/include/configs/calimain.h b/include/configs/calimain.h index c76bc2c..d20074c 100644 --- a/include/configs/calimain.h +++ b/include/configs/calimain.h @@ -185,7 +185,6 @@ #ifdef CONFIG_DRIVER_TI_EMAC #define CONFIG_EMAC_MDIO_PHY_NUM 1 #define CONFIG_MII -#define CONFIG_BOOTP_DEFAULT #define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME diff --git a/include/configs/cam_enc_4xx.h b/include/configs/cam_enc_4xx.h index 0f3f61a..ac7ed81 100644 --- a/include/configs/cam_enc_4xx.h +++ b/include/configs/cam_enc_4xx.h @@ -49,7 +49,6 @@ #define CONFIG_EMAC_MDIO_PHY_NUM 0 #define CONFIG_SYS_EMAC_TI_CLKDIV 0xa9 /* 1MHz */ #define CONFIG_MII -#define CONFIG_BOOTP_DEFAULT #define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index 39a216e..bc5b66c 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -24,6 +24,7 @@ #define CONFIG_OMAP34XX /* which is a 34XX */ #define CONFIG_OMAP_GPIO #define CONFIG_CM_T3X /* working with CM-T35 and CM-T3730 */ +#define CONFIG_OMAP_COMMON #define CONFIG_SYS_TEXT_BASE 0x80008000 diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index c0591c5..c3fb80c 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -42,7 +42,6 @@ #define CONFIG_E500MC /* BOOKE e500mc family */ #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ #define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ -#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ #define CONFIG_MP /* support multiple processors */ #ifndef CONFIG_SYS_TEXT_BASE diff --git a/include/configs/da830evm.h b/include/configs/da830evm.h index 9407eaf..3e71ae5 100644 --- a/include/configs/da830evm.h +++ b/include/configs/da830evm.h @@ -74,7 +74,6 @@ */ #ifdef CONFIG_DRIVER_TI_EMAC #define CONFIG_MII -#define CONFIG_BOOTP_DEFAULT #define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index 3c0aacd..e63d7c4 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -227,7 +227,6 @@ */ #ifdef CONFIG_DRIVER_TI_EMAC #define CONFIG_MII -#define CONFIG_BOOTP_DEFAULT #define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME diff --git a/include/configs/dalmore.h b/include/configs/dalmore.h index 145e7ac..bdf012b 100644 --- a/include/configs/dalmore.h +++ b/include/configs/dalmore.h @@ -21,9 +21,6 @@ #include "tegra114-common.h" -/* Must be off for Dalmore to boot !?!? FIXME */ -#define CONFIG_SYS_DCACHE_OFF - /* Enable fdt support for Dalmore. Flash the image in u-boot-dtb.bin */ #define CONFIG_DEFAULT_DEVICE_TREE tegra114-dalmore #define CONFIG_OF_CONTROL diff --git a/include/configs/davinci_dm365evm.h b/include/configs/davinci_dm365evm.h index e3084d3..82dc1a2 100644 --- a/include/configs/davinci_dm365evm.h +++ b/include/configs/davinci_dm365evm.h @@ -44,7 +44,6 @@ /* Network Configuration */ #define CONFIG_DRIVER_TI_EMAC #define CONFIG_MII -#define CONFIG_BOOTP_DEFAULT #define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME diff --git a/include/configs/davinci_dm6467evm.h b/include/configs/davinci_dm6467evm.h index 3c430ae..7f57877 100644 --- a/include/configs/davinci_dm6467evm.h +++ b/include/configs/davinci_dm6467evm.h @@ -69,7 +69,6 @@ extern unsigned int davinci_arm_clk_get(void); /* Network & Ethernet Configuration */ #define CONFIG_DRIVER_TI_EMAC #define CONFIG_MII -#define CONFIG_BOOTP_DEFAULT #define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h index 6526478..a49a989 100644 --- a/include/configs/davinci_dvevm.h +++ b/include/configs/davinci_dvevm.h @@ -87,7 +87,6 @@ /*==================================*/ #define CONFIG_DRIVER_TI_EMAC #define CONFIG_MII -#define CONFIG_BOOTP_DEFAULT #define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h index 29b10dd..1595bc7 100644 --- a/include/configs/davinci_schmoogie.h +++ b/include/configs/davinci_schmoogie.h @@ -56,7 +56,6 @@ /*==================================*/ #define CONFIG_DRIVER_TI_EMAC #define CONFIG_MII -#define CONFIG_BOOTP_DEFAULT #define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME diff --git a/include/configs/davinci_sffsdr.h b/include/configs/davinci_sffsdr.h index 34a64b3..6ebbe81 100644 --- a/include/configs/davinci_sffsdr.h +++ b/include/configs/davinci_sffsdr.h @@ -50,7 +50,6 @@ /* Network & Ethernet Configuration */ #define CONFIG_DRIVER_TI_EMAC #define CONFIG_MII -#define CONFIG_BOOTP_DEFAULT #define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h index d35aea7..3eaa7c0 100644 --- a/include/configs/davinci_sonata.h +++ b/include/configs/davinci_sonata.h @@ -88,7 +88,6 @@ /*==================================*/ #define CONFIG_DRIVER_TI_EMAC #define CONFIG_MII -#define CONFIG_BOOTP_DEFAULT #define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index 513121a..cb79b4e 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -21,6 +21,7 @@ #define CONFIG_OMAP3_DEVKIT8000 1 /* working with DevKit8000 */ #define CONFIG_MACH_TYPE MACH_TYPE_DEVKIT8000 #define CONFIG_OMAP_GPIO +#define CONFIG_OMAP_COMMON /* * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM diff --git a/include/configs/dig297.h b/include/configs/dig297.h index bf91625..30e3908 100644 --- a/include/configs/dig297.h +++ b/include/configs/dig297.h @@ -30,6 +30,7 @@ #define CONFIG_OMAP /* in a TI OMAP core */ #define CONFIG_OMAP34XX /* which is a 34XX */ #define CONFIG_OMAP_GPIO +#define CONFIG_OMAP_COMMON #define CONFIG_SYS_TEXT_BASE 0x80008000 diff --git a/include/configs/dlvision-10g.h b/include/configs/dlvision-10g.h index 17391cd..68e5246 100644 --- a/include/configs/dlvision-10g.h +++ b/include/configs/dlvision-10g.h @@ -18,7 +18,7 @@ * Include common defines/options for all AMCC eval boards */ #define CONFIG_HOSTNAME dlvsion-10g -#define CONFIG_IDENT_STRING " dlvision-10g 0.03" +#define CONFIG_IDENT_STRING " dlvision-10g 0.05" #include "amcc-common.h" #define CONFIG_BOARD_EARLY_INIT_F @@ -123,9 +123,15 @@ #define CONFIG_SYS_FPGA_COUNT 2 +#define CONFIG_SYS_FPGA_PTR { \ + (struct ihs_fpga *)CONFIG_SYS_FPGA0_BASE, \ + (struct ihs_fpga *)CONFIG_SYS_FPGA1_BASE } + +#define CONFIG_SYS_FPGA_COMMON + #define CONFIG_SYS_LATCH0_RESET 0xffff #define CONFIG_SYS_LATCH0_BOOT 0xffff -#define CONFIG_SYS_LATCH1_RESET 0xffcf +#define CONFIG_SYS_LATCH1_RESET 0xffbf #define CONFIG_SYS_LATCH1_BOOT 0xffff #define CONFIG_SYS_FPGA_NO_RFL_HI @@ -145,7 +151,6 @@ #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write/ms */ #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buff'd writes */ -#define CONFIG_SYS_FLASH_PROTECTION 1 /* use hardware flash protect */ #define CONFIG_SYS_FLASH_EMPTY_INFO /* 'E' for empty sector on flinfo */ #define CONFIG_SYS_FLASH_QUIET_TEST 1 /* no warn upon unknown flash */ diff --git a/include/configs/dlvision.h b/include/configs/dlvision.h index 2747128..2f8d6b4 100644 --- a/include/configs/dlvision.h +++ b/include/configs/dlvision.h @@ -18,7 +18,7 @@ * Include common defines/options for all AMCC eval boards */ #define CONFIG_HOSTNAME dlvision -#define CONFIG_IDENT_STRING " dlvision 0.01" +#define CONFIG_IDENT_STRING " dlvision 0.02" #include "amcc-common.h" #define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f */ @@ -109,7 +109,6 @@ #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write/ms */ #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buff'd writes */ -#define CONFIG_SYS_FLASH_PROTECTION 1 /* use hardware flash protect */ #define CONFIG_SYS_FLASH_EMPTY_INFO /* 'E' for empty sector on flinfo */ #define CONFIG_SYS_FLASH_QUIET_TEST 1 /* no warn upon unknown flash */ diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index 51be73d..4fbe768 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -12,38 +12,33 @@ #ifndef __CONFIG_DRA7XX_EVM_H #define __CONFIG_DRA7XX_EVM_H -/* High Level Configuration Options */ -#define CONFIG_DRA7XX /* in a TI DRA7XX core */ -#define CONFIG_ENV_IS_NOWHERE /* For now. */ - -#include <configs/omap5_common.h> +#define CONFIG_DRA7XX -#define CONFIG_SYS_PROMPT "DRA752 EVM # " +#define CONFIG_ENV_IS_NOWHERE /* For now. */ +#define CONSOLEDEV "ttyO0" #define CONFIG_CONS_INDEX 1 #define CONFIG_SYS_NS16550_COM1 UART1_BASE #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_OMAP_ABE_SYSCK -#define CONSOLEDEV "ttyO0" +#include <configs/omap5_common.h> /* CPSW Ethernet */ -#define CONFIG_CMD_NET +#define CONFIG_CMD_NET /* 'bootp' and 'tftp' */ #define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING -#define CONFIG_CMD_MII -#define CONFIG_DRIVER_TI_CPSW -#define CONFIG_MII -#define CONFIG_BOOTP_DEFAULT -#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */ #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_NET_RETRY_COUNT 10 -#define CONFIG_NET_MULTI -#define CONFIG_PHY_GIGE +#define CONFIG_NET_RETRY_COUNT 10 +#define CONFIG_CMD_PING +#define CONFIG_CMD_MII +#define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */ +#define CONFIG_MII /* Required in net/eth.c */ +#define CONFIG_PHY_GIGE /* per-board part of CPSW */ #define CONFIG_PHYLIB #define CONFIG_PHY_ADDR 2 diff --git a/include/configs/dxr2.h b/include/configs/dxr2.h new file mode 100644 index 0000000..cd553ec --- /dev/null +++ b/include/configs/dxr2.h @@ -0,0 +1,94 @@ +/* + * (C) Copyright 2013 Siemens Schweiz AG + * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Based on: + * U-Boot file:/include/configs/am335x_evm.h + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_DXR2_H +#define __CONFIG_DXR2_H + +#define CONFIG_SIEMENS_DXR2 +#define MACH_TYPE_DXR2 4315 +#define CONFIG_SIEMENS_MACH_TYPE MACH_TYPE_DXR2 + +#include "siemens-am33x-common.h" + +#define CONFIG_SYS_MPUCLK 275 +#define DXR2_IOCTRL_VAL 0x18b +#define DDR_PLL_FREQ 266 +#define CONFIG_SPL_AM33XX_DO_NOT_ENABLE_RTC32K + +#define BOARD_DFU_BUTTON_GPIO 27 +#define BOARD_DFU_BUTTON_LED 64 + +#undef CONFIG_DOS_PARTITION +#undef CONFIG_CMD_FAT + + + /* Physical Memory Map */ +#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ + +/* I2C Configuration */ +#define CONFIG_SYS_I2C_SPEED 100000 + +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define EEPROM_ADDR_DDR3 0x90 +#define EEPROM_ADDR_CHIP 0x120 + +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x300 + +#undef CONFIG_SPL_NET_SUPPORT +#undef CONFIG_SPL_NET_VCI_STRING +#undef CONFIG_SPL_ETH_SUPPORT + +#undef CONFIG_MII +#undef CONFIG_PHY_GIGE +#define CONFIG_PHY_ADDR 0 +#define CONFIG_PHY_SMSC + +#define CONFIG_FACTORYSET + +/* Watchdog */ +#define CONFIG_OMAP_WATCHDOG + +#ifndef CONFIG_SPL_BUILD + +/* Default env settings */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hostname=dxr2\0" \ + "nand_img_size=0x300000\0" \ + "optargs=\0" \ + CONFIG_COMMON_ENV_SETTINGS + +#ifndef CONFIG_RESTORE_FLASH +/* set to negative value for no autoboot */ +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_BOOTCOMMAND \ +"if dfubutton; then " \ + "run dfu_start; " \ + "reset; " \ +"fi;" \ +"if ping ${serverip}; then " \ + "run net_nfs; " \ +"fi;" \ +"run nand_boot;" + +#else +#define CONFIG_BOOTDELAY 0 + +#define CONFIG_BOOTCOMMAND \ + "setenv autoload no; " \ + "dhcp; " \ + "if tftp 80000000 debrick.scr; then " \ + "source 80000000; " \ + "fi" +#endif +#endif /* CONFIG_SPL_BUILD */ +#endif /* ! __CONFIG_DXR2_H */ diff --git a/include/configs/ea20.h b/include/configs/ea20.h index 14a8db3..e08423a 100644 --- a/include/configs/ea20.h +++ b/include/configs/ea20.h @@ -89,7 +89,6 @@ #ifdef CONFIG_DRIVER_TI_EMAC #define CONFIG_EMAC_MDIO_PHY_NUM 0 #define CONFIG_MII -#define CONFIG_BOOTP_DEFAULT #define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h index 247e37b..ccc7bd0 100644 --- a/include/configs/eb_cpux9k2.h +++ b/include/configs/eb_cpux9k2.h @@ -39,6 +39,7 @@ #define CONFIG_SYS_TEXT_BASE 0x21f00000 #endif #define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */ +#define CONFIG_STANDALONE_LOAD_ADDR 0x21000000 #define CONFIG_SYS_BOOT_SIZE 0x00 /* 0 KBytes */ #define CONFIG_SYS_U_BOOT_BASE PHYS_FLASH_1 @@ -123,41 +124,40 @@ #define CONFIG_CMD_DATE #define CONFIG_CMD_DHCP #define CONFIG_CMD_I2C -#define CONFIG_CMD_JFFS2 #define CONFIG_CMD_MII #define CONFIG_CMD_NAND #define CONFIG_CMD_PING -#define CONFIG_I2C_CMD_NO_FLAT #define CONFIG_I2C_CMD_TREE #define CONFIG_CMD_USB #define CONFIG_CMD_FAT - +#define CONFIG_CMD_UBI +#define CONFIG_CMD_MTDPARTS +#define CONFIG_CMD_UBIFS #define CONFIG_SYS_LONGHELP /* - * Filesystems + * MTD defines */ -#define CONFIG_JFFS2_NAND 1 +#define CONFIG_FLASH_CFI_MTD +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS +#define CONFIG_RBTREE +#define CONFIG_LZO -#ifndef CONFIG_JFFS2_CMDLINE -#define CONFIG_JFFS2_DEV "nand0" -#define CONFIG_JFFS2_PART_OFFSET 0 -#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF -#else -#define MTDIDS_DEFAULT "nor0=0,nand0=1" +#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=atmel_nand" #define MTDPARTS_DEFAULT "mtdparts=" \ - "0:" \ - "384k(U-Boot)," \ - "128k(Env)," \ - "128k(Splash)," \ - "4M(Kernel)," \ - "-(FS)" \ + "physmap-flash.0:" \ + "512k(U-Boot)," \ + "128k(Env)," \ + "128k(Splash)," \ + "4M(Kernel)," \ + "384k(MiniFS)," \ + "-(FS)" \ ";" \ - "1:" \ - "-(jffs2)" -#endif /* CONFIG_JFFS2_CMDLINE */ - + "atmel_nand:" \ + "1M(emergency)," \ + "-(data)" /* * Hardware drivers */ @@ -328,7 +328,7 @@ #define CONFIG_BOOTDELAY 5 #define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x60000) +#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x80000) #define CONFIG_ENV_SIZE 0x20000 /* sectors are 128K here */ #define CONFIG_BAUDRATE 115200 @@ -347,12 +347,14 @@ "displayheight=512\0" \ "displaybsteps=1023\0" \ "ubootaddr=10000000\0" \ - "splashimage=10080000\0" \ - "kerneladdr=100A0000\0" \ + "splashimage=100A0000\0" \ + "kerneladdr=100C0000\0" \ "kernelsize=00400000\0" \ - "rootfsaddr=104A0000\0" \ + "rootfsaddr=10520000\0" \ "copy_addr=21200000\0" \ - "rootfssize=00B60000\0" \ + "rootfssize=00AE0000\0" \ + "mtdids=" MTDIDS_DEFAULT "\0" \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ "bootargsdefaults=set bootargs " \ "console=ttyS0,115200 " \ "video=vcxk_fb:xres:${displaywidth}," \ @@ -373,15 +375,15 @@ "erase $(rootfsaddr) +$(rootfssize);" \ "cp.b $(fileaddr) $(rootfsaddr) $(filesize);" \ "\0" \ - "update_uboot=protect off 10000000 1005FFFF;" \ + "update_uboot=protect off 10000000 1007FFFF;" \ "dhcp $(copy_addr) u-boot_eb_cpux9k2;" \ - "erase 10000000 1005FFFF;" \ + "erase 10000000 1007FFFF;" \ "cp.b $(fileaddr) $(ubootaddr) $(filesize);" \ - "protect on 10000000 1005FFFF;reset\0" \ + "protect on 10000000 1007FFFF;reset\0" \ "update_splash=protect off $(splashimage) +20000;" \ "dhcp $(copy_addr) splash_eb_cpux9k2.bmp;" \ "erase $(splashimage) +20000;" \ - "cp.b $(fileaddr) 10080000 $(filesize);" \ + "cp.b $(fileaddr) $(splashimage) $(filesize);" \ "protect on $(splashimage) +20000;reset\0" \ "emergency=run bootargsdefaults;" \ "set bootargs $(bootargs) root=initramfs boot=emergency " \ diff --git a/include/configs/enbw_cmc.h b/include/configs/enbw_cmc.h index 43cf6bc..90033fa 100644 --- a/include/configs/enbw_cmc.h +++ b/include/configs/enbw_cmc.h @@ -135,7 +135,6 @@ */ #ifdef CONFIG_DRIVER_TI_EMAC #define CONFIG_MII -#define CONFIG_BOOTP_DEFAULT #define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h index 2ce5a78..8f8f85f 100644 --- a/include/configs/exynos5250-dt.h +++ b/include/configs/exynos5250-dt.h @@ -23,7 +23,6 @@ #define CONFIG_DISPLAY_BOARDINFO /* Enable fdt support for Exynos5250 */ -#define CONFIG_ARCH_DEVICE_TREE exynos5250 #define CONFIG_OF_CONTROL #define CONFIG_OF_SEPARATE diff --git a/include/configs/galaxy5200.h b/include/configs/galaxy5200.h index 984f274..47e65d8 100644 --- a/include/configs/galaxy5200.h +++ b/include/configs/galaxy5200.h @@ -360,10 +360,9 @@ #define CONFIG_CRC32_VERIFY 1 -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \ - CONFIG_BOOTP_DNS | \ - CONFIG_BOOTP_DNS2 | \ - CONFIG_BOOTP_SEND_HOSTNAME ) +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME #define CONFIG_VERSION_VARIABLE 1 diff --git a/include/configs/hawkboard.h b/include/configs/hawkboard.h index 2e478cc..b8197ac 100644 --- a/include/configs/hawkboard.h +++ b/include/configs/hawkboard.h @@ -97,7 +97,6 @@ */ #define CONFIG_DRIVER_TI_EMAC #define CONFIG_MII -#define CONFIG_BOOTP_DEFAULT #define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME diff --git a/include/configs/igep0033.h b/include/configs/igep0033.h index 12f28f8..3e18a65 100644 --- a/include/configs/igep0033.h +++ b/include/configs/igep0033.h @@ -16,6 +16,7 @@ #define CONFIG_AM33XX #define CONFIG_OMAP +#define CONFIG_OMAP_COMMON #include <asm/arch/omap.h> @@ -27,10 +28,6 @@ #define V_OSCK 24000000 /* Clock output from T2 */ #define V_SCLK (V_OSCK) -/* DMA defines */ -#define CONFIG_DMA_COHERENT -#define CONFIG_DMA_COHERENT_SIZE (1 << 20) - #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ #define CONFIG_SYS_MALLOC_LEN (1024 << 10) #define CONFIG_SYS_LONGHELP /* undef to save memory */ @@ -41,6 +38,9 @@ /* Display cpuinfo */ #define CONFIG_DISPLAY_CPUINFO +/* Flattened Device Tree */ +#define CONFIG_OF_LIBFDT + /* Commands to include */ #include <config_cmd_default.h> @@ -59,48 +59,48 @@ #define CONFIG_CMD_UBI #define CONFIG_CMD_UBIFS -/* - * Because the issues explained in doc/README.memory-test, the "mtest command - * is considered deprecated. It should not be enabled in most normal ports of - * U-Boot. - */ -#undef CONFIG_CMD_MEMTEST +/* Make the verbose messages from UBI stop printing */ +#define CONFIG_UBI_SILENCE_MSG +#define CONFIG_UBIFS_SILENCE_MSG #define CONFIG_BOOTDELAY 1 /* negative for no autoboot */ #define CONFIG_ENV_VARS_UBOOT_CONFIG #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG #define CONFIG_EXTRA_ENV_SETTINGS \ - "loadaddr=0x80200000\0" \ - "rdaddr=0x81000000\0" \ - "bootfile=/boot/uImage\0" \ + "loadaddr=0x80F80000\0" \ + "dtbaddr=0x80200000\0" \ + "bootdir=/boot\0" \ + "bootfile=zImage\0" \ + "dtbfile=am335x-base0033.dtb\0" \ "console=ttyO0,115200n8\0" \ - "optargs=\0" \ + "mtdids=" MTDIDS_DEFAULT "\0" \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ "mmcdev=0\0" \ "mmcroot=/dev/mmcblk0p2 rw\0" \ + "ubiroot=ubi0:filesystem rw ubi.mtd=3,2048\0" \ "mmcrootfstype=ext4 rootwait\0" \ - "ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=${rdaddr},64M\0" \ - "ramrootfstype=ext2\0" \ + "ubirootfstype=ubifs rootwait\0" \ "mmcargs=setenv bootargs console=${console} " \ - "${optargs} " \ "root=${mmcroot} " \ "rootfstype=${mmcrootfstype}\0" \ + "ubiargs=setenv bootargs console=${console} " \ + "root=${ubiroot} " \ + "rootfstype=${ubirootfstype}\0" \ "bootenv=uEnv.txt\0" \ "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ "importbootenv=echo Importing environment from mmc ...; " \ - "env import -t $loadaddr $filesize\0" \ - "ramargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "root=${ramroot} " \ - "rootfstype=${ramrootfstype}\0" \ - "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \ - "loaduimagefat=load mmc ${mmcdev} ${loadaddr} ${bootfile}\0" \ - "loaduimage=load mmc ${mmcdev}:2 ${loadaddr} ${bootfile}\0" \ + "env import -t ${loadaddr} ${filesize}\0" \ + "mmcload=load mmc ${mmcdev}:2 ${loadaddr} ${bootdir}/${bootfile}; " \ + "load mmc ${mmcdev}:2 ${dtbaddr} ${bootdir}/${dtbfile}\0" \ + "ubiload=ubi part filesystem 2048; ubifsmount ubi0; " \ + "ubifsload ${loadaddr} ${bootdir}/${bootfile}; " \ + "ubifsload ${dtbaddr} ${bootdir}/${dtbfile} \0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ - "bootm ${loadaddr}\0" \ - "ramboot=echo Booting from ramdisk ...; " \ - "run ramargs; " \ - "bootm ${loadaddr}\0" \ + "bootz ${loadaddr} - ${dtbaddr}\0" \ + "ubiboot=echo Booting from nand (ubifs) ...; " \ + "run ubiargs; run ubiload; " \ + "bootz ${loadaddr} - ${dtbaddr}\0" \ #define CONFIG_BOOTCOMMAND \ "mmc dev ${mmcdev}; if mmc rescan; then " \ @@ -113,9 +113,11 @@ "echo Running uenvcmd ...;" \ "run uenvcmd;" \ "fi;" \ - "if run loaduimage; then " \ + "if run mmcload; then " \ "run mmcboot;" \ "fi;" \ + "else " \ + "run ubiboot;" \ "fi;" \ /* Max number of command args */ @@ -131,20 +133,18 @@ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */ -#define CONFIG_SYS_HZ 1000 /* 1ms clock */ /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ -#define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */ #define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ -#define CONFIG_SYS_SDRAM_BASE PHYS_DRAM_1 +#define CONFIG_SYS_SDRAM_BASE 0x80000000 #define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ GENERATED_GBL_DATA_SIZE) /* Platform/Board specific defs */ #define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 +#define CONFIG_SYS_HZ 1000 /* 1ms clock */ /* NS16550 Configuration */ #define CONFIG_SYS_NS16550 @@ -153,7 +153,6 @@ #define CONFIG_SYS_NS16550_CLK (48000000) #define CONFIG_SYS_NS16550_COM1 0x44e09000 /* UART0 */ -#define CONFIG_SERIAL_MULTI #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 @@ -175,7 +174,6 @@ /* Ethernet support */ #define CONFIG_DRIVER_TI_CPSW #define CONFIG_MII -#define CONFIG_BOOTP_DEFAULT #define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME @@ -195,18 +193,21 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_ONFI_DETECTION 1 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ +#define CONFIG_SYS_REDUNDAND_ENVIRONMENT #define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */ +#define CONFIG_ENV_OFFSET 0x180000 /* environment starts here */ +#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_OFFSET + CONFIG_SYS_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) #define CONFIG_MTD_PARTITIONS #define CONFIG_MTD_DEVICE #define CONFIG_RBTREE #define CONFIG_LZO -#define MTDIDS_DEFAULT "nand0=nand" -#define MTDPARTS_DEFAULT "mtdparts=nand:512k(SPL),"\ - "1m(U-Boot),128k(U-Boot Env),"\ - "5m(Kernel),-(File System)" +#define MTDIDS_DEFAULT "nand0=omap2-nand.0" +#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:512k(spl),"\ + "1m(uboot),256k(environment),"\ + "-(filesystem)" /* Unsupported features */ #undef CONFIG_USE_IRQ @@ -264,10 +265,6 @@ #define CONFIG_SYS_NAND_ECCSIZE 512 #define CONFIG_SYS_NAND_ECCBYTES 14 -#define CONFIG_SYS_NAND_ECCSTEPS 4 -#define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \ - CONFIG_SYS_NAND_ECCSTEPS) - #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 diff --git a/include/configs/igep00x0.h b/include/configs/igep00x0.h index c17267e..9982cf6 100644 --- a/include/configs/igep00x0.h +++ b/include/configs/igep00x0.h @@ -18,6 +18,7 @@ #define CONFIG_OMAP 1 /* in a TI OMAP core */ #define CONFIG_OMAP34XX 1 /* which is a 34XX */ #define CONFIG_OMAP_GPIO +#define CONFIG_OMAP_COMMON #define CONFIG_SDRC /* The chip has SDRC controller */ @@ -44,6 +45,7 @@ #define CONFIG_OF_LIBFDT #define CONFIG_CMD_BOOTZ +#define CONFIG_SUPPORT_RAW_INITRD /* * NS16550 Configuration @@ -97,8 +99,9 @@ #include <config_cmd_default.h> #define CONFIG_CMD_CACHE -#define CONFIG_CMD_EXT2 /* EXT2 Support */ +#define CONFIG_CMD_EXT4 #define CONFIG_CMD_FAT /* FAT support */ +#define CONFIG_CMD_FS_GENERIC #define CONFIG_CMD_I2C /* I2C serial bus support */ #define CONFIG_CMD_MMC /* MMC support */ #ifdef CONFIG_BOOT_ONENAND @@ -136,6 +139,9 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "usbtty=cdc_acm\0" \ "loadaddr=0x82000000\0" \ + "dtbaddr=0x81600000\0" \ + "bootdir=/boot\0" \ + "bootfile=zImage\0" \ "usbtty=cdc_acm\0" \ "console=ttyO2,115200n8\0" \ "mpurate=auto\0" \ @@ -163,17 +169,20 @@ "omapdss.def_disp=${defaultdisplay} " \ "root=${nandroot} " \ "rootfstype=${nandrootfstype}\0" \ - "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \ + "loadbootenv=load mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \ "importbootenv=echo Importing environment from mmc ...; " \ "env import -t $loadaddr $filesize\0" \ - "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ + "loadzimage=load mmc ${mmcdev}:2 ${loadaddr} ${bootdir}/${bootfile}\0" \ + "loadfdt=load mmc ${mmcdev}:2 ${dtbaddr} ${bootdir}/${dtbfile}\0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ - "bootm ${loadaddr}\0" \ + "bootz ${loadaddr}\0" \ + "mmcbootfdt=echo Booting with DT from mmc ...; " \ + "bootz ${loadaddr} - ${dtbaddr}\0" \ "nandboot=echo Booting from onenand ...; " \ "run nandargs; " \ "onenand read ${loadaddr} 280000 400000; " \ - "bootm ${loadaddr}\0" \ + "bootz ${loadaddr}\0" \ #define CONFIG_BOOTCOMMAND \ "mmc dev ${mmcdev}; if mmc rescan; then " \ @@ -185,7 +194,12 @@ "echo Running uenvcmd ...;" \ "run uenvcmd;" \ "fi;" \ - "if run loaduimage; then " \ + "if run loadzimage; then " \ + "if test -n $dtbfile; then " \ + "if run loadfdt; then " \ + "run mmcbootfdt;" \ + "fi;" \ + "fi;" \ "run mmcboot;" \ "fi;" \ "fi;" \ diff --git a/include/configs/io.h b/include/configs/io.h index 33743e6..79ada68 100644 --- a/include/configs/io.h +++ b/include/configs/io.h @@ -18,7 +18,7 @@ * Include common defines/options for all AMCC eval boards */ #define CONFIG_HOSTNAME io -#define CONFIG_IDENT_STRING " io 0.05" +#define CONFIG_IDENT_STRING " io 0.06" #include "amcc-common.h" #define CONFIG_BOARD_EARLY_INIT_F @@ -123,7 +123,6 @@ #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write/ms */ #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buff'd writes */ -#define CONFIG_SYS_FLASH_PROTECTION 1 /* use hardware flash protect */ #define CONFIG_SYS_FLASH_EMPTY_INFO /* 'E' for empty sector on flinfo */ #define CONFIG_SYS_FLASH_QUIET_TEST 1 /* no warn upon unknown flash */ @@ -230,6 +229,11 @@ #define CONFIG_SYS_FPGA_COUNT 1 +#define CONFIG_SYS_FPGA_PTR \ + { (struct ihs_fpga *)CONFIG_SYS_FPGA0_BASE } + +#define CONFIG_SYS_FPGA_COMMON + /* Memory Bank 3 (Latches) initialization */ #define CONFIG_SYS_LATCH_BASE 0x7f200000 #define CONFIG_SYS_EBC_PB3AP 0xa2015480 diff --git a/include/configs/io64.h b/include/configs/io64.h index dcd1b82..f110b70 100644 --- a/include/configs/io64.h +++ b/include/configs/io64.h @@ -498,6 +498,12 @@ #define CONFIG_SYS_FPGA_COUNT 2 +#define CONFIG_SYS_FPGA_PTR { \ + (struct ihs_fpga *)CONFIG_SYS_FPGA0_BASE, \ + (struct ihs_fpga *)CONFIG_SYS_FPGA1_BASE } + +#define CONFIG_SYS_FPGA_COMMON + #define CONFIG_SYS_LATCH0_RESET 0xffff #define CONFIG_SYS_LATCH0_BOOT 0xffff #define CONFIG_SYS_LATCH1_RESET 0xffbf diff --git a/include/configs/iocon.h b/include/configs/iocon.h index 32d9050..ec9016a 100644 --- a/include/configs/iocon.h +++ b/include/configs/iocon.h @@ -18,7 +18,7 @@ * Include common defines/options for all AMCC eval boards */ #define CONFIG_HOSTNAME iocon -#define CONFIG_IDENT_STRING " iocon 0.04" +#define CONFIG_IDENT_STRING " iocon 0.05" #include "amcc-common.h" #define CONFIG_BOARD_EARLY_INIT_F @@ -63,6 +63,7 @@ * Commands additional to the ones defined in amcc-common.h */ #define CONFIG_CMD_CACHE +#define CONFIG_CMD_FPGAD #undef CONFIG_CMD_EEPROM /* @@ -100,23 +101,53 @@ #define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 #define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F +#define CONFIG_SYS_I2C_SPEED 400000 + +#define CONFIG_PCA953X /* NXP PCA9554 */ +#define CONFIG_PCA9698 /* NXP PCA9698 */ + /* * Software (bit-bang) I2C driver configuration */ +#define CONFIG_SYS_I2C_SOFT +#define CONFIG_SYS_I2C_SOFT_SPEED 50000 +#define CONFIG_SYS_I2C_SOFT_SLAVE 0x7F +#define I2C_SOFT_DECLARATIONS2 +#define CONFIG_SYS_I2C_SOFT_SPEED_2 50000 +#define CONFIG_SYS_I2C_SOFT_SLAVE_2 0x7F +#define I2C_SOFT_DECLARATIONS3 +#define CONFIG_SYS_I2C_SOFT_SPEED_3 50000 +#define CONFIG_SYS_I2C_SOFT_SLAVE_3 0x7F +#define I2C_SOFT_DECLARATIONS4 +#define CONFIG_SYS_I2C_SOFT_SPEED_4 50000 +#define CONFIG_SYS_I2C_SOFT_SLAVE_4 0x7F + +#define CONFIG_SYS_CH7301_I2C {1, 2, 3, 4} #ifndef __ASSEMBLY__ -void fpga_gpio_set(int pin); -void fpga_gpio_clear(int pin); -int fpga_gpio_get(int pin); +void fpga_gpio_set(unsigned int bus, int pin); +void fpga_gpio_clear(unsigned int bus, int pin); +int fpga_gpio_get(unsigned int bus, int pin); #endif #define I2C_ACTIVE { } #define I2C_TRISTATE { } -#define I2C_READ fpga_gpio_get(0x0040) ? 1 : 0 -#define I2C_SDA(bit) if (bit) fpga_gpio_set(0x0040); \ - else fpga_gpio_clear(0x0040) -#define I2C_SCL(bit) if (bit) fpga_gpio_set(0x0020); \ - else fpga_gpio_clear(0x0020) +#define I2C_READ \ + (fpga_gpio_get(I2C_ADAP_HWNR, 0x0040) ? 1 : 0) +#define I2C_SDA(bit) \ + do { \ + if (bit) \ + fpga_gpio_set(I2C_ADAP_HWNR, 0x0040); \ + else \ + fpga_gpio_clear(I2C_ADAP_HWNR, 0x0040); \ + } while (0) +#define I2C_SCL(bit) \ + do { \ + if (bit) \ + fpga_gpio_set(I2C_ADAP_HWNR, 0x0020); \ + else \ + fpga_gpio_clear(I2C_ADAP_HWNR, 0x0020); \ + } while (0) #define I2C_DELAY udelay(25) /* 1/4 I2C clock duration */ /* @@ -141,7 +172,6 @@ int fpga_gpio_get(int pin); #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write/ms */ #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buff'd writes */ -#define CONFIG_SYS_FLASH_PROTECTION 1 /* use hardware flash protect */ #define CONFIG_SYS_FLASH_EMPTY_INFO /* 'E' for empty sector on flinfo */ #define CONFIG_SYS_FLASH_QUIET_TEST 1 /* no warn upon unknown flash */ @@ -236,6 +266,11 @@ int fpga_gpio_get(int pin); #define CONFIG_SYS_FPGA_COUNT 1 +#define CONFIG_SYS_MCLINK_MAX 3 + +#define CONFIG_SYS_FPGA_PTR \ + { (struct ihs_fpga *)CONFIG_SYS_FPGA0_BASE, NULL, NULL, NULL } + /* Memory Bank 3 (Latches) initialization */ #define CONFIG_SYS_LATCH_BASE 0x7f200000 #define CONFIG_SYS_EBC_PB3AP 0x02025080 @@ -251,6 +286,9 @@ int fpga_gpio_get(int pin); */ #define CONFIG_SYS_MPC92469AC #define CONFIG_SYS_CH7301 -#define CONFIG_SYS_OSD_SCREENS CONFIG_SYS_FPGA_COUNT +#define CONFIG_SYS_OSD_SCREENS 1 + +#define CONFIG_BITBANGMII /* bit-bang MII PHY management */ +#define CONFIG_BITBANGMII_MULTI #endif /* __CONFIG_H */ diff --git a/include/configs/ipam390.h b/include/configs/ipam390.h new file mode 100644 index 0000000..82d4298 --- /dev/null +++ b/include/configs/ipam390.h @@ -0,0 +1,331 @@ +/* + * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. + * Based on: + * U-Boot:include/configs/da850evm.h + * + * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ + * + * Based on davinci_dvevm.h. Original Copyrights follow: + * + * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * Board + */ +#define CONFIG_DRIVER_TI_EMAC +#define CONFIG_BARIX_IPAM390 + +/* + * SoC Configuration + */ +#define CONFIG_MACH_DAVINCI_DA850_EVM +#define CONFIG_ARM926EJS /* arm926ejs CPU core */ +#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ +#define CONFIG_SOC_DA850 /* TI DA850 SoC */ +#define CONFIG_SYS_EXCEPTION_VECTORS_HIGH +#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) +#define CONFIG_SYS_OSCIN_FREQ 24000000 +#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE +#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) +#define CONFIG_SYS_HZ 1000 +#define CONFIG_SYS_DA850_PLL_INIT +#define CONFIG_SYS_DA850_DDR_INIT +#define CONFIG_SYS_TEXT_BASE 0xc1080000 + +/* + * Memory Info + */ +#define CONFIG_SYS_MALLOC_LEN (0x10000 + 1*1024*1024) /* malloc() len */ +#define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */ +#define PHYS_SDRAM_1_SIZE (128 << 20) /* SDRAM size 128MB */ +#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/ + +/* memtest start addr */ +#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + 0x2000000) + +/* memtest will be run on 16MB */ +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 16 * 1024 * 1024) + +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ + +#define CONFIG_SYS_DA850_SYSCFG_SUSPSRC ( \ + DAVINCI_SYSCFG_SUSPSRC_TIMER0 | \ + DAVINCI_SYSCFG_SUSPSRC_UART2 | \ + DAVINCI_SYSCFG_SUSPSRC_UART0 | \ + DAVINCI_SYSCFG_SUSPSRC_EMAC) + +/* + * PLL configuration + */ +#define CONFIG_SYS_DV_CLKMODE 0 +#define CONFIG_SYS_DA850_PLL0_POSTDIV 1 +#define CONFIG_SYS_DA850_PLL0_PLLDIV1 0x8000 +#define CONFIG_SYS_DA850_PLL0_PLLDIV2 0x8001 +#define CONFIG_SYS_DA850_PLL0_PLLDIV3 0x8002 +#define CONFIG_SYS_DA850_PLL0_PLLDIV4 0x8003 +#define CONFIG_SYS_DA850_PLL0_PLLDIV5 0x8002 +#define CONFIG_SYS_DA850_PLL0_PLLDIV6 CONFIG_SYS_DA850_PLL0_PLLDIV1 +#define CONFIG_SYS_DA850_PLL0_PLLDIV7 0x8005 + +#define CONFIG_SYS_DA850_PLL1_POSTDIV 1 +#define CONFIG_SYS_DA850_PLL1_PLLDIV1 0x8000 +#define CONFIG_SYS_DA850_PLL1_PLLDIV2 0x8001 +#define CONFIG_SYS_DA850_PLL1_PLLDIV3 0x8002 + +#define CONFIG_SYS_DA850_PLL0_PLLM 24 +#define CONFIG_SYS_DA850_PLL1_PLLM 24 + +/* + * DDR2 memory configuration + */ +#define CONFIG_SYS_DA850_DDR2_DDRPHYCR (DV_DDR_PHY_PWRDNEN | \ + DV_DDR_PHY_EXT_STRBEN | \ + (0x2 << DV_DDR_PHY_RD_LATENCY_SHIFT)) +#define CONFIG_SYS_DA850_DDR2_SDRCR 0x00000498 + +#define CONFIG_SYS_DA850_DDR2_SDBCR2 0x00000004 +#define CONFIG_SYS_DA850_DDR2_PBBPR 0x00000020 + + +#define CONFIG_SYS_DA850_DDR2_SDTIMR ( \ + (13 << DV_DDR_SDTMR1_RFC_SHIFT) | \ + (2 << DV_DDR_SDTMR1_RP_SHIFT) | \ + (2 << DV_DDR_SDTMR1_RCD_SHIFT) | \ + (2 << DV_DDR_SDTMR1_WR_SHIFT) | \ + (5 << DV_DDR_SDTMR1_RAS_SHIFT) | \ + (8 << DV_DDR_SDTMR1_RC_SHIFT) | \ + (1 << DV_DDR_SDTMR1_RRD_SHIFT) | \ + (1 << DV_DDR_SDTMR1_WTR_SHIFT)) + +#define CONFIG_SYS_DA850_DDR2_SDTIMR2 ( \ + (8 << DV_DDR_SDTMR2_RASMAX_SHIFT) | \ + (2 << DV_DDR_SDTMR2_XP_SHIFT) | \ + (0 << DV_DDR_SDTMR2_ODT_SHIFT) | \ + (14 << DV_DDR_SDTMR2_XSNR_SHIFT) | \ + (0xc7 << DV_DDR_SDTMR2_XSRD_SHIFT) | \ + (1 << DV_DDR_SDTMR2_RTP_SHIFT) | \ + (2 << DV_DDR_SDTMR2_CKE_SHIFT)) + +#define CONFIG_SYS_DA850_DDR2_SDBCR ( \ + (1 << DV_DDR_SDCR_DDR2EN_SHIFT) | \ + (1 << DV_DDR_SDCR_DDRDRIVE0_SHIFT) | \ + (1 << DV_DDR_SDCR_DDREN_SHIFT) | \ + (1 << DV_DDR_SDCR_SDRAMEN_SHIFT) | \ + (1 << DV_DDR_SDCR_BUS_WIDTH_SHIFT) | \ + (2 << DV_DDR_SDCR_CL_SHIFT) | \ + (3 << DV_DDR_SDCR_IBANK_SHIFT) | \ + (2 << DV_DDR_SDCR_PAGESIZE_SHIFT)) + +#define CONFIG_SYS_DA850_CS3CFG (DAVINCI_ABCR_WSETUP(2) | \ + DAVINCI_ABCR_WSTROBE(2) | \ + DAVINCI_ABCR_WHOLD(1) | \ + DAVINCI_ABCR_RSETUP(1) | \ + DAVINCI_ABCR_RSTROBE(4) | \ + DAVINCI_ABCR_RHOLD(0) | \ + DAVINCI_ABCR_TA(1) | \ + DAVINCI_ABCR_ASIZE_8BIT) + + +/* + * Serial Driver info + */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */ +#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART0_BASE /* Base address of UART0 */ +#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) +#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ +#define CONFIG_BAUDRATE 115200 /* Default baud rate */ + +/* + * Flash & Environment + */ +#define CONFIG_NAND_DAVINCI +#define CONFIG_SYS_NO_FLASH +#define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */ +#define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */ +#define CONFIG_ENV_SIZE (128 << 10) +#define CONFIG_SYS_NAND_USE_FLASH_BBT +#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST +#define CONFIG_SYS_NAND_PAGE_2K +#define CONFIG_SYS_NAND_CS 3 +#define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE3_BASE +#define CONFIG_SYS_NAND_MASK_CLE 0x10 +#define CONFIG_SYS_NAND_MASK_ALE 0x8 +#undef CONFIG_SYS_NAND_HW_ECC +#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define CONFIG_SYS_NAND_HW_ECC_OOBFIRST +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_PAGE_SIZE (2 << 10) +#define CONFIG_SYS_NAND_BLOCK_SIZE (128 << 10) +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 +#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x120000 +#define CONFIG_SYS_NAND_U_BOOT_DST 0xc1080000 +#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST +#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_DST - \ + CONFIG_SYS_NAND_U_BOOT_SIZE - \ + CONFIG_SYS_MALLOC_LEN - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_NAND_ECCPOS { \ + 24, 25, 26, 27, 28, \ + 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, \ + 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, \ + 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, \ + 59, 60, 61, 62, 63 } +#define CONFIG_SYS_NAND_PAGE_COUNT 64 +#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 +#define CONFIG_SYS_NAND_ECCSIZE 512 +#define CONFIG_SYS_NAND_ECCBYTES 10 +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_NAND_BASE +#define CONFIG_SPL_NAND_DRIVERS +#define CONFIG_SPL_NAND_ECC +#define CONFIG_SPL_NAND_SIMPLE +#define CONFIG_SPL_NAND_LOAD + +/* + * Network & Ethernet Configuration + */ +#ifdef CONFIG_DRIVER_TI_EMAC +#define CONFIG_DRIVER_TI_EMAC_USE_RMII +#define CONFIG_BOOTP_DEFAULT +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_NET_RETRY_COUNT 10 +#endif + +/* + * U-Boot general configuration + */ +#define CONFIG_MISC_INIT_R +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOOTFILE "uImage" /* Boot file name */ +#define CONFIG_SYS_PROMPT "U-Boot > " /* Command Prompt */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */ +#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000) +#define CONFIG_VERSION_VARIABLE +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_CMDLINE_EDITING +#define CONFIG_SYS_LONGHELP +#define CONFIG_CRC32_VERIFY +#define CONFIG_MX_CYCLIC + +/* + * Linux Information + */ +#define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100) +#define CONFIG_HWCONFIG /* enable hwconfig */ +#define CONFIG_CMDLINE_TAG +#define CONFIG_REVISION_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_BOOTARGS \ + "mem=128M console=ttyS0,115200n8 root=/dev/mtdblock0p4 rw noinitrd ip=dhcp" +#define CONFIG_BOOTDELAY 3 +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hwconfig=dsp:wake=yes\0" \ + "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ + "mtdids=" MTDIDS_DEFAULT "\0" \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ + "setbootparms=nand read c0100000 200000 400000;" \ + "spl export atags c0100000;" \ + "nand erase.part bootparms;" \ + "nand write c0000100 180000 20000\0" \ + "\0" + +/* + * U-Boot commands + */ +#include <config_cmd_default.h> +#define CONFIG_CMD_ENV +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_MEMORY + +#ifdef CONFIG_CMD_BDI +#define CONFIG_CLOCKS +#endif + +#ifndef CONFIG_DRIVER_TI_EMAC +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_DHCP +#undef CONFIG_CMD_MII +#undef CONFIG_CMD_PING +#endif + +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NAND_TRIMFFS + +#define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS +#define CONFIG_LZO +#define CONFIG_RBTREE +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS + +#define MTDIDS_NAME_STR "davinci_nand.0" +#define MTDIDS_DEFAULT "nand0=" MTDIDS_NAME_STR +#define MTDPARTS_DEFAULT "mtdparts=" MTDIDS_NAME_STR ":" \ + "128k(u-boot-env)," \ + "1408k(u-boot)," \ + "128k(bootparms)," \ + "384k(factory-info)," \ + "4M(kernel)," \ + "-(rootfs)" + +/* defines for SPL */ +#define CONFIG_SPL +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_BOARD_INIT +#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE - \ + CONFIG_SYS_MALLOC_LEN) +#define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_LDSCRIPT "board/$(BOARDDIR)/u-boot-spl-ipam390.lds" +#define CONFIG_SPL_STACK 0x8001ff00 +#define CONFIG_SPL_TEXT_BASE 0x80000000 +#define CONFIG_SPL_MAX_SIZE 0x20000 +#define CONFIG_SPL_MAX_FOOTPRINT 32768 + +/* additions for new relocation code, must added to all boards */ +#define CONFIG_SYS_SDRAM_BASE 0xc0000000 + +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ + GENERATED_GBL_DATA_SIZE) + +/* add FALCON boot mode */ +#define CONFIG_CMD_SPL +#define CONFIG_SPL_OS_BOOT +#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00200000 +#define CONFIG_SYS_SPL_ARGS_ADDR LINUX_BOOT_PARAM_ADDR +#define CONFIG_CMD_SPL_NAND_OFS 0x00180000 +#define CONFIG_CMD_SPL_WRITE_SIZE 0x400 + +/* GPIO support */ +#define CONFIG_SPL_GPIO_SUPPORT +#define CONFIG_DA8XX_GPIO +#define CONFIG_IPAM390_GPIO_BOOTMODE ((16 * 7) + 14) + +#define CONFIG_SHOW_BOOT_PROGRESS +#define CONFIG_IPAM390_GPIO_LED_RED ((16 * 7) + 11) +#define CONFIG_IPAM390_GPIO_LED_GREEN ((16 * 7) + 12) + +#endif /* __CONFIG_H */ diff --git a/include/configs/linkstation.h b/include/configs/linkstation.h index 2ec7761..932dac3 100644 --- a/include/configs/linkstation.h +++ b/include/configs/linkstation.h @@ -95,7 +95,17 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_EXT2 -#define CONFIG_BOOTP_MASK CONFIG_BOOTP_ALL +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_NISDOMAIN +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_BOOTP_NTPSERVER +#define CONFIG_BOOTP_TIMEOFFSET #define CONFIG_OF_LIBFDT 1 diff --git a/include/configs/mcx.h b/include/configs/mcx.h index c2b1631..5e27ab2 100644 --- a/include/configs/mcx.h +++ b/include/configs/mcx.h @@ -16,6 +16,7 @@ #define CONFIG_OMAP34XX /* which is a 34XX */ #define CONFIG_OMAP3_MCX /* working with mcx */ #define CONFIG_OMAP_GPIO +#define CONFIG_OMAP_COMMON #define MACH_TYPE_MCX 3656 #define CONFIG_MACH_TYPE MACH_TYPE_MCX @@ -408,7 +409,6 @@ #define CONFIG_DRIVER_TI_EMAC #define CONFIG_DRIVER_TI_EMAC_USE_RMII #define CONFIG_MII -#define CONFIG_BOOTP_DEFAULT #define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index 87f3d13..0e3de77 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -18,7 +18,7 @@ /* Open Firmware DTS */ #define CONFIG_OF_CONTROL 1 #define CONFIG_OF_EMBED 1 -#define CONFIG_DEFAULT_DEVICE_TREE microblaze +#define CONFIG_DEFAULT_DEVICE_TREE microblaze-generic /* linear and spi flash memory */ #ifdef XILINX_FLASH_START diff --git a/include/configs/neo.h b/include/configs/neo.h index 5abb8b1..ccbb1fa 100644 --- a/include/configs/neo.h +++ b/include/configs/neo.h @@ -19,7 +19,7 @@ * Include common defines/options for all AMCC eval boards */ #define CONFIG_HOSTNAME neo -#define CONFIG_IDENT_STRING " neo 0.01" +#define CONFIG_IDENT_STRING " neo 0.02" #include "amcc-common.h" #define CONFIG_BOARD_EARLY_INIT_F @@ -130,7 +130,6 @@ #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ -#define CONFIG_SYS_FLASH_PROTECTION 1 /* use hardware flash protection */ #define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ #define CONFIG_SYS_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ @@ -222,6 +221,11 @@ #define CONFIG_SYS_FPGA_COUNT 1 +#define CONFIG_SYS_FPGA_PTR \ + { (struct ihs_fpga *)CONFIG_SYS_FPGA0_BASE } + +#define CONFIG_SYS_FPGA_COMMON + /* Memory Bank 3 (Latches) initialization */ #define CONFIG_SYS_LATCH_BASE 0x7f200000 #define CONFIG_SYS_EBC_PB3AP 0x92015480 diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h index 36c6800..cfc5f12 100644 --- a/include/configs/nokia_rx51.h +++ b/include/configs/nokia_rx51.h @@ -28,6 +28,7 @@ #define CONFIG_OMAP3430 /* which is in a 3430 */ #define CONFIG_OMAP3_RX51 /* working with RX51 */ #define CONFIG_SYS_L2CACHE_OFF /* pretend there is no L2 CACHE */ +#define CONFIG_OMAP_COMMON #define CONFIG_MACH_TYPE MACH_TYPE_NOKIA_RX51 diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index 4487451..c1245e7 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -19,6 +19,7 @@ #define CONFIG_OMAP34XX 1 /* which is a 34XX */ #define CONFIG_OMAP3_BEAGLE 1 /* working with BEAGLE */ #define CONFIG_OMAP_GPIO +#define CONFIG_OMAP_COMMON #define CONFIG_SDRC /* The chip has SDRC controller */ diff --git a/include/configs/omap3_evm_common.h b/include/configs/omap3_evm_common.h index 3b3e25a..edf6543 100644 --- a/include/configs/omap3_evm_common.h +++ b/include/configs/omap3_evm_common.h @@ -15,6 +15,7 @@ #define CONFIG_OMAP /* This is TI OMAP core */ #define CONFIG_OMAP34XX /* belonging to 34XX family */ #define CONFIG_OMAP_GPIO +#define CONFIG_OMAP_COMMON #define CONFIG_SDRC /* The chip has SDRC controller */ diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index 3dd6d32..ee6db51 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -18,6 +18,7 @@ #define CONFIG_OMAP34XX /* which is a 34XX */ #define CONFIG_OMAP3_LOGIC /* working with Logic OMAP boards */ #define CONFIG_OMAP_GPIO +#define CONFIG_OMAP_COMMON #define CONFIG_SYS_TEXT_BASE 0x80400000 diff --git a/include/configs/omap3_mvblx.h b/include/configs/omap3_mvblx.h index 5526b43..0c88419 100644 --- a/include/configs/omap3_mvblx.h +++ b/include/configs/omap3_mvblx.h @@ -24,6 +24,7 @@ #define CONFIG_MVBLX 1 /* working with mvBlueLYNX-X */ #define CONFIG_MACH_TYPE MACH_TYPE_MVBLX #define CONFIG_OMAP_GPIO +#define CONFIG_OMAP_COMMON #define CONFIG_SDRC /* The chip has SDRC controller */ diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index 3e018c0..88380a4 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -14,6 +14,7 @@ #define CONFIG_OMAP34XX /* which is a 34XX */ #define CONFIG_OMAP3_OVERO /* working with overo */ #define CONFIG_OMAP_GPIO +#define CONFIG_OMAP_COMMON #define CONFIG_SDRC /* The chip has SDRC controller */ diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h index 3e8bd67..91a2568 100644 --- a/include/configs/omap3_pandora.h +++ b/include/configs/omap3_pandora.h @@ -17,6 +17,7 @@ #define CONFIG_OMAP34XX 1 /* which is a 34XX */ #define CONFIG_OMAP3_PANDORA 1 /* working with pandora */ #define CONFIG_OMAP_GPIO +#define CONFIG_OMAP_COMMON #define CONFIG_SDRC /* The chip has SDRC controller */ diff --git a/include/configs/omap3_sdp3430.h b/include/configs/omap3_sdp3430.h index 836a3d8..a5e469c 100644 --- a/include/configs/omap3_sdp3430.h +++ b/include/configs/omap3_sdp3430.h @@ -23,6 +23,7 @@ #define CONFIG_OMAP 1 /* in a TI OMAP core */ #define CONFIG_OMAP34XX 1 /* which is a 34XX */ #define CONFIG_OMAP3_3430SDP 1 /* working with SDP Rev2 */ +#define CONFIG_OMAP_COMMON #define CONFIG_SDRC /* The chip has SDRC controller */ diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h index 3687045..c747d52 100644 --- a/include/configs/omap3_zoom1.h +++ b/include/configs/omap3_zoom1.h @@ -19,6 +19,7 @@ #define CONFIG_OMAP 1 /* in a TI OMAP core */ #define CONFIG_OMAP34XX 1 /* which is a 34XX */ #define CONFIG_OMAP3_ZOOM1 1 /* working with Zoom MDK Rev1 */ +#define CONFIG_OMAP_COMMON #define CONFIG_SDRC /* The chip has SDRC controller */ diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h index c57df8e..cb8c7ec 100644 --- a/include/configs/omap3_zoom2.h +++ b/include/configs/omap3_zoom2.h @@ -21,6 +21,7 @@ #define CONFIG_OMAP34XX 1 /* which is a 34XX */ #define CONFIG_OMAP3_ZOOM2 1 /* working with Zoom II */ #define CONFIG_OMAP_GPIO +#define CONFIG_OMAP_COMMON #define CONFIG_SDRC /* The chip has SDRC controller */ diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h index 719cb83..e9f2383 100644 --- a/include/configs/omap4_common.h +++ b/include/configs/omap4_common.h @@ -20,6 +20,7 @@ #define CONFIG_OMAP44XX 1 /* which is a 44XX */ #define CONFIG_OMAP4430 1 /* which is in a 4430 */ #define CONFIG_OMAP_GPIO +#define CONFIG_OMAP_COMMON /* Get CPU defs */ #include <asm/arch/cpu.h> diff --git a/include/configs/omap4_sdp4430.h b/include/configs/omap4_sdp4430.h index 3da78b6..f40e0b7 100644 --- a/include/configs/omap4_sdp4430.h +++ b/include/configs/omap4_sdp4430.h @@ -17,6 +17,7 @@ * High Level Configuration Options */ #define CONFIG_4430SDP 1 /* working with SDP */ +#define CONFIG_MACH_TYPE MACH_TYPE_OMAP_4430SDP #include <configs/omap4_common.h> diff --git a/include/configs/omap5_common.h b/include/configs/omap5_common.h index 7dd56cf..98ba559 100644 --- a/include/configs/omap5_common.h +++ b/include/configs/omap5_common.h @@ -9,111 +9,62 @@ * TI OMAP5 AND DRA7XX common configuration settings * * SPDX-License-Identifier: GPL-2.0+ + * + * For more details, please see the technical documents listed at + * http://www.ti.com/product/omap5432 */ #ifndef __CONFIG_OMAP5_COMMON_H #define __CONFIG_OMAP5_COMMON_H -/* - * High Level Configuration Options - */ -#define CONFIG_OMAP /* in a TI OMAP core */ -#define CONFIG_OMAP54XX /* which is a 54XX */ -#define CONFIG_OMAP_GPIO - -/* Get CPU defs */ -#include <asm/arch/cpu.h> -#include <asm/arch/omap.h> - -/* Display CPU and Board Info */ +#define CONFIG_OMAP54XX #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO - #define CONFIG_MISC_INIT_R +#define CONFIG_ARCH_CPU_INIT -#define CONFIG_OF_LIBFDT -#define CONFIG_CMD_BOOTZ +#define CONFIG_SYS_CACHELINE_SIZE 64 -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG +/* Use General purpose timer 1 */ +#define CONFIG_SYS_TIMERBASE GPT2_BASE /* - * Size of malloc() pool - * Total Size Environment - 128k - * Malloc - add 256k + * For the DDR timing information we can either dynamically determine + * the timings to use or use pre-determined timings (based on using the + * dynamic method. Default to the static timing infomation. */ +#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS +#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS +#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION +#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS +#endif + +#ifndef CONFIG_SPL_BUILD +#define CONFIG_PALMAS_POWER +#endif + +#include <asm/arch/cpu.h> +#include <asm/arch/omap.h> + #define CONFIG_ENV_SIZE (128 << 10) -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (256 << 10)) -/* Vector Base */ -#define CONFIG_SYS_CA9_VECTOR_BASE SRAM_ROM_VECT_BASE -/* - * Hardware drivers - */ +#include <configs/ti_armv7_common.h> /* - * serial port - NS16550 compatible + * Hardware drivers */ -#define V_NS16550_CLK 48000000 - #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK - -/* CPU */ -#define CONFIG_ARCH_CPU_INIT - -/* I2C */ -#define CONFIG_HARD_I2C -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 1 -#define CONFIG_DRIVER_OMAP34XX_I2C -#define CONFIG_I2C_MULTI_BUS - -/* MMC */ -#define CONFIG_GENERIC_MMC -#define CONFIG_MMC -#define CONFIG_OMAP_HSMMC -#define CONFIG_DOS_PARTITION - -#define CONFIG_SYS_CONSOLE_IS_IN_ENV - -/* Flash */ -#define CONFIG_SYS_NO_FLASH - -/* Cache */ -#define CONFIG_SYS_CACHELINE_SIZE 64 -#define CONFIG_SYS_CACHELINE_SHIFT 6 +#define CONFIG_SYS_NS16550_CLK 48000000 -/* commands to include */ -#include <config_cmd_default.h> - -/* Enabled commands */ -#define CONFIG_CMD_EXT2 /* EXT2 Support */ -#define CONFIG_CMD_FAT /* FAT support */ -#define CONFIG_CMD_I2C /* I2C serial bus support */ -#define CONFIG_CMD_MMC /* MMC support */ - -/* Disabled commands */ +/* Per-SoC commands */ #undef CONFIG_CMD_NET #undef CONFIG_CMD_NFS -#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ -#undef CONFIG_CMD_IMLS /* List all found images */ /* * Environment setup */ - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_ENV_VARS_UBOOT_CONFIG -#define CONFIG_CMD_FS_GENERIC -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_EXT4 - -#define CONFIG_ENV_OVERWRITE - #ifndef PARTS_DEFAULT #define PARTS_DEFAULT #endif @@ -178,96 +129,17 @@ "fi; " \ "fi" -#define CONFIG_AUTO_COMPLETE 1 /* - * Miscellaneous configurable options + * SPL related defines. The Public RAM memory map the ROM defines the + * area between 0x40300000 and 0x4031E000 as a download area for OMAP5 + * (dra7xx is larger, but we do not need to be larger at this time). We + * set CONFIG_SPL_DISPLAY_PRINT to have omap_rev_string() called and + * print some information. */ - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_CBSIZE 256 -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) - -/* - * memtest setup - */ -#define CONFIG_SYS_MEMTEST_START 0x80000000 -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (32 << 20)) - -/* Default load address */ -#define CONFIG_SYS_LOAD_ADDR 0x80000000 - -/* Use General purpose timer 1 */ -#define CONFIG_SYS_TIMERBASE GPT2_BASE -#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 - -/* - * SDRAM Memory Map - * Even though we use two CS all the memory - * is mapped to one contiguous block - */ -#define CONFIG_NR_DRAM_BANKS 1 - -#define CONFIG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ - GENERATED_GBL_DATA_SIZE) - -#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS - -/* Defines for SDRAM init */ -#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS -#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION -#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS -#endif - -#ifndef CONFIG_SPL_BUILD -#define CONFIG_PALMAS_POWER -#endif - -/* Defines for SPL */ -#define CONFIG_SPL -#define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_TEXT_BASE 0x40300350 -#define CONFIG_SPL_MAX_SIZE 0x19000 /* 100K */ -#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR +#define CONFIG_SPL_TEXT_BASE 0x40300000 +#define CONFIG_SPL_MAX_SIZE (0x4031E000 - CONFIG_SPL_TEXT_BASE) #define CONFIG_SPL_DISPLAY_PRINT - -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ -#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 -#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" - -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBDISK_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SPL_FAT_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" -/* - * 64 bytes before this address should be set aside for u-boot.img's - * header. That is 80E7FFC0--0x80E80000 should not be used for any - * other needs. - */ -#define CONFIG_SYS_TEXT_BASE 0x80E80000 - -/* - * BSS and malloc area 64MB into memory to allow enough - * space for the kernel at the beginning of memory - */ -#define CONFIG_SPL_BSS_START_ADDR 0x84000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x84100000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */ -#define CONFIG_SPL_GPIO_SUPPORT - #endif /* __CONFIG_OMAP5_COMMON_H */ diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h index 47568e9..0d1c43c 100644 --- a/include/configs/omap5_uevm.h +++ b/include/configs/omap5_uevm.h @@ -37,14 +37,36 @@ #define CONFIG_PARTITION_UUIDS #define CONFIG_CMD_PART +/* Required support for the TCA642X GPIO we have on the uEVM */ #define CONFIG_TCA642X #define CONFIG_CMD_TCA642X #define CONFIG_SYS_I2C_TCA642X_BUS_NUM 4 #define CONFIG_SYS_I2C_TCA642X_ADDR 0x22 -#define CONFIG_SYS_PROMPT "OMAP5432 uEVM # " +/* USB UHH support options */ +#define CONFIG_CMD_USB +#define CONFIG_USB_HOST +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_OMAP +#define CONFIG_USB_STORAGE +#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET + +#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 80 +#define CONFIG_OMAP_EHCI_PHY3_RESET_GPIO 79 + +/* Enabled commands */ +#define CONFIG_CMD_DHCP /* DHCP Support */ +#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ +#define CONFIG_CMD_NFS /* NFS support */ + +/* USB Networking options */ +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_SMSC95XX #define CONSOLEDEV "ttyO2" +/* Max time to hold reset on this board, see doc/README.omap-reset-time */ #define CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC 16296 + #endif /* __CONFIG_OMAP5_EVM_H */ diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index 1b0be23..5f0c4fb 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -34,7 +34,7 @@ #define CONFIG_SYS_L2_SIZE (256 << 10) #endif -#if defined(CONFIG_P1020RDB) +#if defined(CONFIG_P1020RDB_PC) #define CONFIG_BOARDNAME "P1020RDB-PC" #define CONFIG_NAND_FSL_ELBC #define CONFIG_P1020 @@ -50,6 +50,35 @@ #define CONFIG_SYS_L2_SIZE (256 << 10) #endif +/* + * P1020RDB-PD board has user selectable switches for evaluating different + * frequency and boot options for the P1020 device. The table that + * follow describe the available options. The front six binary number was in + * accordance with SW3[1:6]. + * 111101 533 533 267 667 NOR Core0 boot; Core1 hold-off + * 101101 667 667 333 667 NOR Core0 boot; Core1 hold-off + * 011001 800 800 400 667 NOR Core0 boot; Core1 hold-off + * 001001 800 800 400 667 SD/MMC Core0 boot; Core1 hold-off + * 001101 800 800 400 667 SPI Core0 boot; Core1 hold-off + * 010001 800 800 400 667 NAND Core0 boot; Core1 hold-off + * 011101 800 800 400 667 PCIe-2 Core0 boot; Core1 hold-off + */ +#if defined(CONFIG_P1020RDB_PD) +#define CONFIG_BOARDNAME "P1020RDB-PD" +#define CONFIG_NAND_FSL_ELBC +#define CONFIG_P1020 +#define CONFIG_SPI_FLASH +#define CONFIG_VSC7385_ENET +#define CONFIG_SLIC +#define __SW_BOOT_MASK 0x03 +#define __SW_BOOT_NOR 0x64 +#define __SW_BOOT_SPI 0x34 +#define __SW_BOOT_SD 0x24 +#define __SW_BOOT_NAND 0x44 +#define __SW_BOOT_PCIE 0x74 +#define CONFIG_SYS_L2_SIZE (256 << 10) +#endif + #if defined(CONFIG_P1021RDB) #define CONFIG_BOARDNAME "P1021RDB-PC" #define CONFIG_NAND_FSL_ELBC @@ -143,7 +172,6 @@ #define CONFIG_SPL_INIT_MINIMAL #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_NAND_SUPPORT -#define CONFIG_SPL_NAND_MINIMAL #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" @@ -259,7 +287,7 @@ #define SPD_EEPROM_ADDRESS 0x52 #undef CONFIG_FSL_DDR_INTERACTIVE -#ifdef CONFIG_P1020MBG +#if (defined(CONFIG_P1020MBG) || defined(CONFIG_P1020RDB_PD)) #define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_2G #define CONFIG_CHIP_SELECTS_PER_CTRL 2 #else @@ -330,7 +358,7 @@ /* * Local Bus Definitions */ -#if defined(CONFIG_P1020MBG) +#if (defined(CONFIG_P1020MBG) || defined(CONFIG_P1020RDB_PD)) #define CONFIG_SYS_MAX_FLASH_SECT 512 /* 64M */ #define CONFIG_SYS_FLASH_BASE 0xec000000 #elif defined(CONFIG_P1020UTM) @@ -381,13 +409,27 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND +#if defined(CONFIG_P1020RDB_PD) +#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) +#else #define CONFIG_SYS_NAND_BLOCK_SIZE (16 * 1024) +#endif #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ | BR_PS_8 /* Port Size = 8 bit */ \ | BR_MS_FCM /* MSEL = FCM */ \ | BR_V) /* valid */ +#if defined(CONFIG_P1020RDB_PD) +#define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_32KB \ + | OR_FCM_PGS /* Large Page*/ \ + | OR_FCM_CSCT \ + | OR_FCM_CST \ + | OR_FCM_CHT \ + | OR_FCM_SCY_1 \ + | OR_FCM_TRLX \ + | OR_FCM_EHTR) +#else #define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_32KB /* small page */ \ | OR_FCM_CSCT \ | OR_FCM_CST \ @@ -395,6 +437,7 @@ | OR_FCM_SCY_1 \ | OR_FCM_TRLX \ | OR_FCM_EHTR) +#endif #endif /* CONFIG_NAND_FSL_ELBC */ #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ diff --git a/include/configs/p1_twr.h b/include/configs/p1_twr.h new file mode 100644 index 0000000..4aa7064 --- /dev/null +++ b/include/configs/p1_twr.h @@ -0,0 +1,619 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * QorIQ P1 Tower boards configuration file + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +#if defined(CONFIG_TWR_P1025) +#define CONFIG_BOARDNAME "TWR-P1025" +#define CONFIG_P1025 +#define CONFIG_PHY_ATHEROS +#define CONFIG_QE +#define CONFIG_SYS_LBC_LBCR 0x00080000 /* Conversion of LBC addr */ +#define CONFIG_SYS_LBC_LCRR 0x80000002 /* LB clock ratio reg */ +#endif + +#ifdef CONFIG_SDCARD +#define CONFIG_RAMBOOT_SDCARD +#define CONFIG_SYS_RAMBOOT +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_SYS_TEXT_BASE 0x11000000 +#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc +#endif + +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#endif + +#ifndef CONFIG_RESET_VECTOR_ADDRESS +#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc +#endif + +#ifndef CONFIG_SYS_MONITOR_BASE +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ +#endif + +/* High Level Configuration Options */ +#define CONFIG_BOOKE +#define CONFIG_E500 +#define CONFIG_MPC85xx + +#define CONFIG_MP + +#define CONFIG_FSL_ELBC +#define CONFIG_PCI +#define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ +#define CONFIG_PCIE2 /* PCIE controler 2 (slot 2) */ +#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ +#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ +#define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ +#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ + +#define CONFIG_FSL_LAW +#define CONFIG_TSEC_ENET /* tsec ethernet support */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_CMD_SATA +#define CONFIG_SATA_SIL3114 +#define CONFIG_SYS_SATA_MAX_DEVICE 2 +#define CONFIG_LIBATA +#define CONFIG_LBA48 + +#ifndef __ASSEMBLY__ +extern unsigned long get_board_sys_clk(unsigned long dummy); +#endif +#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) /*sysclk for TWR-P1025 */ + +#define CONFIG_DDR_CLK_FREQ 66666666 + +#define CONFIG_HWCONFIG +/* + * These can be toggled for performance analysis, otherwise use default. + */ +#define CONFIG_L2_CACHE +#define CONFIG_BTB + +#define CONFIG_BOARD_EARLY_INIT_F /* Call board_pre_init */ + +#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x1fffffff +#define CONFIG_PANIC_HANG /* do not reset board on panic */ + +#define CONFIG_SYS_CCSRBAR 0xffe00000 +#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR + +/* DDR Setup */ +#define CONFIG_FSL_DDR3 + +#define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_512M +#define CONFIG_CHIP_SELECTS_PER_CTRL 1 + +#define CONFIG_SYS_SDRAM_SIZE (1u << (CONFIG_SYS_SDRAM_SIZE_LAW - 19)) +#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE + +#define CONFIG_NUM_DDR_CONTROLLERS 1 +#define CONFIG_DIMM_SLOTS_PER_CTLR 1 + +/* Default settings for DDR3 */ +#define CONFIG_SYS_DDR_CS0_BNDS 0x0000001f +#define CONFIG_SYS_DDR_CS0_CONFIG 0x80014202 +#define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000 +#define CONFIG_SYS_DDR_CS1_BNDS 0x00000000 +#define CONFIG_SYS_DDR_CS1_CONFIG 0x00000000 +#define CONFIG_SYS_DDR_CS1_CONFIG_2 0x00000000 + +#define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef +#define CONFIG_SYS_DDR_INIT_ADDR 0x00000000 +#define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000 +#define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000 + +#define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600 +#define CONFIG_SYS_DDR_WRLVL_CONTROL 0x8655a608 +#define CONFIG_SYS_DDR_SR_CNTR 0x00000000 +#define CONFIG_SYS_DDR_RCW_1 0x00000000 +#define CONFIG_SYS_DDR_RCW_2 0x00000000 +#define CONFIG_SYS_DDR_CONTROL 0xc70c0000 /* Type = DDR3 */ +#define CONFIG_SYS_DDR_CONTROL_2 0x04401050 +#define CONFIG_SYS_DDR_TIMING_4 0x00220001 +#define CONFIG_SYS_DDR_TIMING_5 0x03402400 + +#define CONFIG_SYS_DDR_TIMING_3 0x00020000 +#define CONFIG_SYS_DDR_TIMING_0 0x00220004 +#define CONFIG_SYS_DDR_TIMING_1 0x5c5b6544 +#define CONFIG_SYS_DDR_TIMING_2 0x0fa880de +#define CONFIG_SYS_DDR_CLK_CTRL 0x03000000 +#define CONFIG_SYS_DDR_MODE_1 0x80461320 +#define CONFIG_SYS_DDR_MODE_2 0x00008000 +#define CONFIG_SYS_DDR_INTERVAL 0x09480000 + +/* + * Memory map + * + * 0x0000_0000 0x1fff_ffff DDR Up to 512MB cacheable + * 0x8000_0000 0xdfff_ffff PCI Express Mem 1.5G non-cacheable(PCIe * 3) + * 0xffc0_0000 0xffc3_ffff PCI IO range 256k non-cacheable + * + * Localbus + * 0xe000_0000 0xe002_0000 SSD1289 128K non-cacheable + * 0xec00_0000 0xefff_ffff FLASH Up to 64M non-cacheable + * + * 0xff90_0000 0xff97_ffff L2 SRAM Up to 512K cacheable + * 0xffd0_0000 0xffd0_3fff init ram 16K Cacheable + * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable + */ + +/* + * Local Bus Definitions + */ +#define CONFIG_SYS_MAX_FLASH_SECT 512 /* 64M */ +#define CONFIG_SYS_FLASH_BASE 0xec000000 + +#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE + +#define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS)) \ + | BR_PS_16 | BR_V) + +#define CONFIG_FLASH_OR_PRELIM 0xfc0000b1 + +#define CONFIG_SYS_SSD_BASE 0xe0000000 +#define CONFIG_SYS_SSD_BASE_PHYS CONFIG_SYS_SSD_BASE +#define CONFIG_SSD_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_SSD_BASE_PHYS) | \ + BR_PS_16 | BR_V) +#define CONFIG_SSD_OR_PRELIM (OR_AM_64KB | OR_GPCM_CSNT | OR_GPCM_XACS | \ + OR_GPCM_ACS_DIV2 | OR_GPCM_SCY | \ + OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD) + +#define CONFIG_SYS_BR2_PRELIM CONFIG_SSD_BR_PRELIM +#define CONFIG_SYS_OR2_PRELIM CONFIG_SSD_OR_PRELIM + +#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} +#define CONFIG_SYS_FLASH_QUIET_TEST +#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ + +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ + +#undef CONFIG_SYS_FLASH_CHECKSUM +#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE + +#define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ + +#define CONFIG_SYS_INIT_RAM_LOCK +#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 +/* Initial L1 address */ +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS +/* Size of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 + +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +#define CONFIG_SYS_MONITOR_LEN (512 * 1024)/* Reserve 512 kB for Mon */ +#define CONFIG_SYS_MALLOC_LEN (1024 * 1024)/* Reserved for malloc */ + +#define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ +#define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ + +/* Serial Port + * open - index 2 + * shorted - index 1 + */ +#define CONFIG_CONS_INDEX 1 +#undef CONFIG_SERIAL_SOFTWARE_FIFO +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) + +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) + +/* Use the HUSH parser */ +#define CONFIG_SYS_HUSH_PARSER +#ifdef CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#endif + +/* + * Pass open firmware flat tree + */ +#define CONFIG_OF_LIBFDT +#define CONFIG_OF_BOARD_SETUP +#define CONFIG_OF_STDOUT_VIA_ALIAS + +#define CONFIG_SYS_64BIT_VSPRINTF +#define CONFIG_SYS_64BIT_STRTOUL + +/* new uImage format support */ +#define CONFIG_FIT +#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ + +/* I2C */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_FSL /* Use FSL common I2C driver */ +#define CONFIG_SYS_FSL_I2C_SPEED 400000 /* I2C spd and slave address */ +#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 + +/* + * I2C2 EEPROM + */ +#define CONFIG_SYS_FSL_I2C2_SPEED 400000 /* I2C spd and slave address */ +#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 + +#define CONFIG_SYS_I2C_PCA9555_ADDR 0x23 + +/* enable read and write access to EEPROM */ +#define CONFIG_CMD_EEPROM +#define CONFIG_SYS_I2C_MULTI_EEPROMS +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 + +/* + * eSPI - Enhanced SPI + */ +#define CONFIG_HARD_SPI +#define CONFIG_FSL_ESPI + +#if defined(CONFIG_PCI) +/* + * General PCI + * Memory space is mapped 1-1, but I/O space must start from 0. + */ + +/* controller 2, direct to uli, tgtid 2, Base address 9000 */ +#define CONFIG_SYS_PCIE2_NAME "TWR-ELEV PCIe SLOT" +#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 +#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 +#define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 +#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000 +#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000 +#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ + +/* controller 1, tgtid 1, Base address a000 */ +#define CONFIG_SYS_PCIE1_NAME "mini PCIe SLOT" +#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 +#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 +#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000 +#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE1_IO_PHYS 0xffc00000 +#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ + +#define CONFIG_NET_MULTI +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CONFIG_E1000 /* Defind e1000 pci Ethernet card*/ +#define CONFIG_CMD_PCI +#define CONFIG_CMD_NET + +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CONFIG_DOS_PARTITION +#endif /* CONFIG_PCI */ + +#if defined(CONFIG_TSEC_ENET) + +#ifndef CONFIG_NET_MULTI +#define CONFIG_NET_MULTI +#endif + +#define CONFIG_MII /* MII PHY management */ +#define CONFIG_TSEC1 +#define CONFIG_TSEC1_NAME "eTSEC1" +#undef CONFIG_TSEC2 +#undef CONFIG_TSEC2_NAME +#define CONFIG_TSEC3 +#define CONFIG_TSEC3_NAME "eTSEC3" + +#define TSEC1_PHY_ADDR 2 +#define TSEC2_PHY_ADDR 0 +#define TSEC3_PHY_ADDR 1 + +#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) + +#define TSEC1_PHYIDX 0 +#define TSEC2_PHYIDX 0 +#define TSEC3_PHYIDX 0 + +#define CONFIG_ETHPRIME "eTSEC1" + +#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ + +#define CONFIG_HAS_ETH0 +#define CONFIG_HAS_ETH1 +#undef CONFIG_HAS_ETH2 +#endif /* CONFIG_TSEC_ENET */ + +#ifdef CONFIG_QE +/* QE microcode/firmware address */ +#define CONFIG_SYS_QE_FMAN_FW_IN_NOR +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xefec0000 +#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 +#endif /* CONFIG_QE */ + +#ifdef CONFIG_TWR_P1025 +/* + * QE UEC ethernet configuration + */ +#define CONFIG_MIIM_ADDRESS (CONFIG_SYS_CCSRBAR + 0x82120) + +#undef CONFIG_UEC_ETH +#define CONFIG_PHY_MODE_NEED_CHANGE + +#define CONFIG_UEC_ETH1 /* ETH1 */ +#define CONFIG_HAS_ETH0 + +#ifdef CONFIG_UEC_ETH1 +#define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */ +#define CONFIG_SYS_UEC1_RX_CLK QE_CLK12 /* CLK12 for MII */ +#define CONFIG_SYS_UEC1_TX_CLK QE_CLK9 /* CLK9 for MII */ +#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH +#define CONFIG_SYS_UEC1_PHY_ADDR 0x18 /* 0x18 for MII */ +#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_MII +#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100 +#endif /* CONFIG_UEC_ETH1 */ + +#define CONFIG_UEC_ETH5 /* ETH5 */ +#define CONFIG_HAS_ETH1 + +#ifdef CONFIG_UEC_ETH5 +#define CONFIG_SYS_UEC5_UCC_NUM 4 /* UCC5 */ +#define CONFIG_SYS_UEC5_RX_CLK QE_CLK_NONE +#define CONFIG_SYS_UEC5_TX_CLK QE_CLK13 /* CLK 13 for RMII */ +#define CONFIG_SYS_UEC5_ETH_TYPE FAST_ETH +#define CONFIG_SYS_UEC5_PHY_ADDR 0x19 /* 0x19 for RMII */ +#define CONFIG_SYS_UEC5_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII +#define CONFIG_SYS_UEC5_INTERFACE_SPEED 100 +#endif /* CONFIG_UEC_ETH5 */ +#endif /* CONFIG_TWR-P1025 */ + +/* + * Environment + */ +#ifdef CONFIG_SYS_RAMBOOT +#ifdef CONFIG_RAMBOOT_SDCARD +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_SYS_MMC_ENV_DEV 0 +#else +#define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) +#define CONFIG_ENV_SIZE 0x2000 +#endif +#else +#define CONFIG_ENV_IS_IN_FLASH +#if CONFIG_SYS_MONITOR_BASE > 0xfff80000 +#define CONFIG_ENV_ADDR 0xfff80000 +#else +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) +#endif +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ +#endif + +#define CONFIG_LOADS_ECHO /* echo on for serial download */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_PING +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_ELF +#define CONFIG_CMD_SETEXPR +#define CONFIG_CMD_REGINFO + +/* + * USB + */ +#define CONFIG_HAS_FSL_DR_USB + +#if defined(CONFIG_HAS_FSL_DR_USB) +#define CONFIG_USB_EHCI + +#ifdef CONFIG_USB_EHCI +#define CONFIG_CMD_USB +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_USB_EHCI_FSL +#define CONFIG_USB_STORAGE +#endif +#endif + +#define CONFIG_MMC + +#ifdef CONFIG_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#endif + +#if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) \ + || defined(CONFIG_FSL_SATA) +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#endif + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_CMDLINE_EDITING /* Command-line editing */ +#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) + /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms tick */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 64 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ + +/* + * Environment Configuration + */ +#define CONFIG_HOSTNAME unknown +#define CONFIG_ROOTPATH "/opt/nfsroot" +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ + +/* default location for tftp and bootm */ +#define CONFIG_LOADADDR 1000000 + +#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ +#define CONFIG_BOOTARGS /* the boot command will set bootargs */ + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_EXTRA_ENV_SETTINGS \ +"netdev=eth0\0" \ +"uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ +"loadaddr=1000000\0" \ +"bootfile=uImage\0" \ +"dtbfile=twr-p1025twr.dtb\0" \ +"ramdiskfile=rootfs.ext2.gz.uboot\0" \ +"qefirmwarefile=fsl_qe_ucode_1021_10_A.bin\0" \ +"tftpflash=tftpboot $loadaddr $uboot; " \ + "protect off " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ + "erase " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ + "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize; " \ + "protect on " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ + "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize\0" \ +"kernelflash=tftpboot $loadaddr $bootfile; " \ + "protect off 0xefa80000 +$filesize; " \ + "erase 0xefa80000 +$filesize; " \ + "cp.b $loadaddr 0xefa80000 $filesize; " \ + "protect on 0xefa80000 +$filesize; " \ + "cmp.b $loadaddr 0xefa80000 $filesize\0" \ +"dtbflash=tftpboot $loadaddr $dtbfile; " \ + "protect off 0xefe80000 +$filesize; " \ + "erase 0xefe80000 +$filesize; " \ + "cp.b $loadaddr 0xefe80000 $filesize; " \ + "protect on 0xefe80000 +$filesize; " \ + "cmp.b $loadaddr 0xefe80000 $filesize\0" \ +"ramdiskflash=tftpboot $loadaddr $ramdiskfile; " \ + "protect off 0xeeb80000 +$filesize; " \ + "erase 0xeeb80000 +$filesize; " \ + "cp.b $loadaddr 0xeeb80000 $filesize; " \ + "protect on 0xeeb80000 +$filesize; " \ + "cmp.b $loadaddr 0xeeb80000 $filesize\0" \ +"qefirmwareflash=tftpboot $loadaddr $qefirmwarefile; " \ + "protect off 0xefec0000 +$filesize; " \ + "erase 0xefec0000 +$filesize; " \ + "cp.b $loadaddr 0xefec0000 $filesize; " \ + "protect on 0xefec0000 +$filesize; " \ + "cmp.b $loadaddr 0xefec0000 $filesize\0" \ +"consoledev=ttyS0\0" \ +"ramdiskaddr=2000000\0" \ +"ramdiskfile=rootfs.ext2.gz.uboot\0" \ +"fdtaddr=c00000\0" \ +"bdev=sda1\0" \ +"norbootaddr=ef080000\0" \ +"norfdtaddr=ef040000\0" \ +"ramdisk_size=120000\0" \ +"usbboot=setenv bootargs root=/dev/sda1 rw rootdelay=5 " \ +"console=$consoledev,$baudrate $othbootargs ; bootm 0xefa80000 - 0xefe80000" + +#define CONFIG_NFSBOOTCOMMAND \ +"setenv bootargs root=/dev/nfs rw " \ +"nfsroot=$serverip:$rootpath " \ +"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ +"console=$consoledev,$baudrate $othbootargs;" \ +"tftp $loadaddr $bootfile&&" \ +"tftp $fdtaddr $fdtfile&&" \ +"bootm $loadaddr - $fdtaddr" + +#define CONFIG_HDBOOT \ +"setenv bootargs root=/dev/$bdev rw rootdelay=30 " \ +"console=$consoledev,$baudrate $othbootargs;" \ +"usb start;" \ +"ext2load usb 0:1 $loadaddr /boot/$bootfile;" \ +"ext2load usb 0:1 $fdtaddr /boot/$fdtfile;" \ +"bootm $loadaddr - $fdtaddr" + +#define CONFIG_USB_FAT_BOOT \ +"setenv bootargs root=/dev/ram rw " \ +"console=$consoledev,$baudrate $othbootargs " \ +"ramdisk_size=$ramdisk_size;" \ +"usb start;" \ +"fatload usb 0:2 $loadaddr $bootfile;" \ +"fatload usb 0:2 $fdtaddr $fdtfile;" \ +"fatload usb 0:2 $ramdiskaddr $ramdiskfile;" \ +"bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_USB_EXT2_BOOT \ +"setenv bootargs root=/dev/ram rw " \ +"console=$consoledev,$baudrate $othbootargs " \ +"ramdisk_size=$ramdisk_size;" \ +"usb start;" \ +"ext2load usb 0:4 $loadaddr $bootfile;" \ +"ext2load usb 0:4 $fdtaddr $fdtfile;" \ +"ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \ +"bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_NORBOOT \ +"setenv bootargs root=/dev/mtdblock3 rw " \ +"console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;" \ +"bootm $norbootaddr - $norfdtaddr" + +#define CONFIG_RAMBOOTCOMMAND_TFTP \ +"setenv bootargs root=/dev/ram rw " \ +"console=$consoledev,$baudrate $othbootargs " \ +"ramdisk_size=$ramdisk_size;" \ +"tftp $ramdiskaddr $ramdiskfile;" \ +"tftp $loadaddr $bootfile;" \ +"tftp $fdtaddr $fdtfile;" \ +"bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ +"setenv bootargs root=/dev/ram rw " \ +"console=$consoledev,$baudrate $othbootargs " \ +"ramdisk_size=$ramdisk_size;" \ +"bootm 0xefa80000 0xeeb80000 0xefe80000" + +#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND + +#endif /* __CONFIG_H */ diff --git a/include/configs/pcm051.h b/include/configs/pcm051.h index 9b16c47..e2b4de7 100644 --- a/include/configs/pcm051.h +++ b/include/configs/pcm051.h @@ -21,12 +21,10 @@ #define CONFIG_AM33XX #define CONFIG_OMAP +#define CONFIG_OMAP_COMMON #include <asm/arch/omap.h> -#define CONFIG_DMA_COHERENT -#define CONFIG_DMA_COHERENT_SIZE (1 << 20) - #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ #define CONFIG_SYS_MALLOC_LEN (1024 << 10) #define CONFIG_SYS_LONGHELP /* undef to save memory */ @@ -125,7 +123,7 @@ * memtest works on 8 MB in DRAM after skipping 32MB from * start addr of ram disk */ -#define CONFIG_SYS_MEMTEST_START (PHYS_DRAM_1 + (64 * 1024 * 1024)) +#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + (64 << 20)) #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START \ + (8 * 1024 * 1024)) @@ -149,10 +147,9 @@ /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ -#define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */ #define CONFIG_MAX_RAM_BANK_SIZE (1024 << 19) /* 512MiB */ -#define CONFIG_SYS_SDRAM_BASE PHYS_DRAM_1 +#define CONFIG_SYS_SDRAM_BASE 0x80000000 #define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ GENERATED_GBL_DATA_SIZE) /* Platform/Board specific defs */ @@ -292,7 +289,6 @@ #define CONFIG_CMD_PING #define CONFIG_DRIVER_TI_CPSW #define CONFIG_MII -#define CONFIG_BOOTP_DEFAULT #define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME diff --git a/include/configs/pxm2.h b/include/configs/pxm2.h new file mode 100644 index 0000000..20b0f9a --- /dev/null +++ b/include/configs/pxm2.h @@ -0,0 +1,153 @@ +/* + * siemens pxm2 + * (C) Copyright 2013 Siemens Schweiz AG + * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Based on: + * U-Boot file:/include/configs/am335x_evm.h + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_PXM2_H +#define __CONFIG_PXM2_H + +#define CONFIG_SIEMENS_PXM2 +#define MACH_TYPE_PXM2 4309 +#define CONFIG_SIEMENS_MACH_TYPE MACH_TYPE_PXM2 + +#include "siemens-am33x-common.h" + +#define CONFIG_SYS_MPUCLK 720 +#define DXR2_IOCTRL_VAL 0x18b +#define DDR_PLL_FREQ 266 + +#define BOARD_DFU_BUTTON_GPIO 59 +#define BOARD_DFU_BUTTON_LED 117 +#define BOARD_LCD_POWER 111 +#define BOARD_BACK_LIGHT 112 +#define BOARD_TOUCH_POWER 57 + + /* Physical Memory Map */ +#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* 1GB */ + +/* I2C Configuration */ +#define CONFIG_SYS_I2C_SPEED 400000 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 + + +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x300 + +#undef CONFIG_SPL_NET_SUPPORT +#undef CONFIG_SPL_NET_VCI_STRING +#undef CONFIG_SPL_ETH_SUPPORT + +#define CONFIG_PHY_ADDR 0 +#define CONFIG_PHY_ATHEROS + +#define CONFIG_FACTORYSET + +/* UBI Support */ +#ifndef CONFIG_SPL_BUILD +#define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_PARTITIONS +#define CONFIG_MTD_DEVICE +#define CONFIG_RBTREE +#define CONFIG_LZO +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#endif + +/* Watchdog */ +#define CONFIG_OMAP_WATCHDOG + +#ifndef CONFIG_SPL_BUILD + +/* Default env settings */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hostname=pxm2\0" \ + "nand_img_size=0x500000\0" \ + "optargs=\0" \ + CONFIG_COMMON_ENV_SETTINGS \ + "mmc_dev=0\0" \ + "mmc_root=/dev/mmcblk0p2 rw\0" \ + "mmc_root_fs_type=ext4 rootwait\0" \ + "mmc_load_uimage=" \ + "mmc rescan; " \ + "setenv bootfile uImage;" \ + "fatload mmc ${mmc_dev} ${kloadaddr} ${bootfile}\0" \ + "loadbootenv=fatload mmc ${mmc_dev} ${loadaddr} ${bootenv}\0" \ + "importbootenv=echo Importing environment from mmc ...; " \ + "env import -t $loadaddr $filesize\0" \ + "mmc_args=run bootargs_defaults;" \ + "mtdparts default;" \ + "setenv bootargs ${bootargs} " \ + "root=${mmc_root} ${mtdparts}" \ + "rootfstype=${mmc_root_fs_type} ip=${ip_method} " \ + "eth=${ethaddr} " \ + "\0" \ + "mmc_boot=run mmc_args; " \ + "run mmc_load_uimage; " \ + "bootm ${kloadaddr}\0" \ + "" + +#ifndef CONFIG_RESTORE_FLASH +/* set to negative value for no autoboot */ +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_BOOTCOMMAND \ + "if dfubutton; then " \ + "run dfu_start; " \ + "reset; " \ + "fi; " \ + "if mmc rescan; then " \ + "echo SD/MMC found on device ${mmc_dev};" \ + "if run loadbootenv; then " \ + "echo Loaded environment from ${bootenv};" \ + "run importbootenv;" \ + "fi;" \ + "if test -n $uenvcmd; then " \ + "echo Running uenvcmd ...;" \ + "run uenvcmd;" \ + "fi;" \ + "if run mmc_load_uimage; then " \ + "run mmc_args;" \ + "bootm ${kloadaddr};" \ + "fi;" \ + "fi;" \ + "run nand_boot;" \ + "if ping ${serverip}; then " \ + "run net_nfs; " \ + "fi; " + +#else +#define CONFIG_BOOTDELAY 0 + +#define CONFIG_BOOTCOMMAND \ + "setenv autoload no; " \ + "dhcp; " \ + "if tftp 80000000 debrick.scr; then " \ + "source 80000000; " \ + "fi" +#endif +#endif /* CONFIG_SPL_BUILD */ + +#define CONFIG_VIDEO +#if defined(CONFIG_VIDEO) +#define CONFIG_VIDEO_DA8XX +#define CONFIG_CFB_CONSOLE +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_SPLASH_SCREEN +#define CONFIG_SPLASH_SCREEN_ALIGN +#define CONFIG_VIDEO_LOGO +#define CONFIG_VIDEO_BMP_RLE8 +#define CONFIG_VIDEO_BMP_LOGO +#define CONFIG_CMD_BMP +#define DA8XX_LCD_CNTL_BASE LCD_CNTL_BASE +#define PWM_TICKS 0x1388 +#define PWM_DUTY 0x200 +#endif + +#endif /* ! __CONFIG_PXM2_H */ diff --git a/include/configs/rut.h b/include/configs/rut.h new file mode 100644 index 0000000..7c94644 --- /dev/null +++ b/include/configs/rut.h @@ -0,0 +1,156 @@ +/* + * siemens rut + * (C) Copyright 2013 Siemens Schweiz AG + * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Based on: + * U-Boot file:/include/configs/am335x_evm.h + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_RUT_H +#define __CONFIG_RUT_H + +#define CONFIG_SIEMENS_RUT +#define MACH_TYPE_RUT 4316 +#define CONFIG_SIEMENS_MACH_TYPE MACH_TYPE_RUT + +#include "siemens-am33x-common.h" + +#define CONFIG_SYS_MPUCLK 600 +#define RUT_IOCTRL_VAL 0x18b +#define DDR_PLL_FREQ 303 + + /* Physical Memory Map */ +#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MiB */ + +/* I2C Configuration */ +#define CONFIG_SYS_I2C_SPEED 100000 + +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 /* 64 byte pages */ +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* take up to 10 msec */ + +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 + +#undef CONFIG_SPL_NET_SUPPORT +#undef CONFIG_SPL_NET_VCI_STRING +#undef CONFIG_SPL_ETH_SUPPORT + +#define CONFIG_PHY_ADDR 1 +#define CONFIG_PHY_NATSEMI + +#define CONFIG_FACTORYSET + +/* UBI Support */ +#ifndef CONFIG_SPL_BUILD +#define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_PARTITIONS +#define CONFIG_MTD_DEVICE +#define CONFIG_RBTREE +#define CONFIG_LZO +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#endif + +/* Watchdog */ +#define WATCHDOG_TRIGGER_GPIO 14 + +#ifndef CONFIG_SPL_BUILD + +/* Default env settings */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hostname=rut\0" \ + "splashpos=488,352\0" \ + "optargs=fixrtc --no-log consoleblank=0 \0" \ + CONFIG_COMMON_ENV_SETTINGS \ + "mmc_dev=0\0" \ + "mmc_root=/dev/mmcblk0p2 rw\0" \ + "mmc_root_fs_type=ext4 rootwait\0" \ + "mmc_load_uimage=" \ + "mmc rescan; " \ + "setenv bootfile uImage;" \ + "fatload mmc ${mmc_dev} ${kloadaddr} ${bootfile}\0" \ + "loadbootenv=fatload mmc ${mmc_dev} ${loadaddr} ${bootenv}\0" \ + "importbootenv=echo Importing environment from mmc ...; " \ + "env import -t $loadaddr $filesize\0" \ + "mmc_args=run bootargs_defaults;" \ + "mtdparts default;" \ + "setenv bootargs ${bootargs} " \ + "root=${mmc_root} ${mtdparts}" \ + "rootfstype=${mmc_root_fs_type} ip=${ip_method} " \ + "eth=${ethaddr} " \ + "\0" \ + "mmc_boot=run mmc_args; " \ + "run mmc_load_uimage; " \ + "bootm ${kloadaddr}\0" \ + "" + +#ifndef CONFIG_RESTORE_FLASH +/* set to negative value for no autoboot */ +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_BOOTCOMMAND \ + "if mmc rescan; then " \ + "echo SD/MMC found on device ${mmc_dev};" \ + "if run loadbootenv; then " \ + "echo Loaded environment from ${bootenv};" \ + "run importbootenv;" \ + "fi;" \ + "if test -n $uenvcmd; then " \ + "echo Running uenvcmd ...;" \ + "run uenvcmd;" \ + "fi;" \ + "if run mmc_load_uimage; then " \ + "run mmc_args;" \ + "bootm ${kloadaddr};" \ + "fi;" \ + "fi;" \ + "run nand_boot;" \ + "if ping ${serverip}; then " \ + "run net_nfs; " \ + "fi; " + +#else +#define CONFIG_BOOTDELAY 0 + +#define CONFIG_BOOTCOMMAND \ + "setenv autoload no; " \ + "dhcp; " \ + "if tftp 80000000 debrick.scr; then " \ + "source 80000000; " \ + "fi" +#endif + +#endif /* CONFIG_SPL_BUILD */ + +#ifdef CONFIG_SPL_BUILD +#undef CONFIG_HW_WATCHDOG +#endif + +#define CONFIG_VIDEO +#if defined(CONFIG_VIDEO) +#define CONFIG_VIDEO_DA8XX +#define CONFIG_CFB_CONSOLE +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_SPLASH_SCREEN +#define CONFIG_SPLASH_SCREEN_ALIGN +#define CONFIG_VIDEO_LOGO +#define CONFIG_VIDEO_BMP_RLE8 +#define CONFIG_VIDEO_BMP_LOGO +#define CONFIG_CMD_BMP +#define DA8XX_LCD_CNTL_BASE LCD_CNTL_BASE + +#define CONFIG_SPI +#define CONFIG_OMAP3_SPI + +#define BOARD_LCD_RESET 115 /* Bank 3 pin 19 */ +#define CONFIG_ARCH_EARLY_INIT_R +#define CONFIG_FORMIKE +#endif + +#endif /* ! __CONFIG_RUT_H */ diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h index 10697d6..4099198 100644 --- a/include/configs/sama5d3xek.h +++ b/include/configs/sama5d3xek.h @@ -56,7 +56,6 @@ #define LCD_BPP LCD_COLOR16 #define LCD_OUTPUT_BPP 24 #define CONFIG_LCD_LOGO -#undef LCD_TEST_PATTERN #define CONFIG_LCD_INFO #define CONFIG_LCD_INFO_BELOW_LOGO #define CONFIG_SYS_WHITE_ON_BLACK @@ -112,7 +111,6 @@ #define CONFIG_CMD_NAND #ifdef CONFIG_CMD_NAND -#define CONFIG_NAND_MAX_CHIPS 1 #define CONFIG_NAND_ATMEL #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 @@ -126,7 +124,6 @@ #define CONFIG_ATMEL_NAND_HW_PMECC #define CONFIG_PMECC_CAP 4 #define CONFIG_PMECC_SECTOR_SIZE 512 -#define CONFIG_PMECC_INDEX_TABLE_OFFSET ATMEL_PMECC_INDEX_OFFSET_512 #define CONFIG_CMD_NAND_TRIMFFS #endif @@ -136,6 +133,11 @@ #define CONFIG_NET_MULTI #define CONFIG_NET_RETRY_COUNT 20 #define CONFIG_MACB_SEARCH_PHY +#define CONFIG_RGMII +#define CONFIG_CMD_MII +#define CONFIG_PHYLIB +#define CONFIG_PHY_MICREL +#define CONFIG_PHY_MICREL_KSZ9021 /* MMC */ #define CONFIG_CMD_MMC @@ -195,7 +197,7 @@ "bootm 0x22000000 - 0x21000000" #define CONFIG_SYS_MMC_ENV_DEV 0 #else -#define CONIG_ENV_IS_NOWHERE +#define CONFIG_ENV_IS_NOWHERE #endif #ifdef CONFIG_SYS_USE_MMC diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h new file mode 100644 index 0000000..5426ee8 --- /dev/null +++ b/include/configs/siemens-am33x-common.h @@ -0,0 +1,461 @@ +/* + * siemens am33x common board options + * (C) Copyright 2013 Siemens Schweiz AG + * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Based on: + * U-Boot file:/include/configs/am335x_evm.h + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_SIEMENS_AM33X_COMMON_H +#define __CONFIG_SIEMENS_AM33X_COMMON_H + +#define CONFIG_AM33XX +#define CONFIG_OMAP +#define CONFIG_OMAP_COMMON + +#include <asm/arch/omap.h> + +#define CONFIG_DMA_COHERENT +#define CONFIG_DMA_COHERENT_SIZE (1 << 20) + +#define CONFIG_ENV_SIZE (0x2000) +#define CONFIG_SYS_MALLOC_LEN (16 * 1024 * 1024) +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT "U-Boot# " +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_BOARD_LATE_INIT +#define CONFIG_SYS_NO_FLASH +#define CONFIG_MACH_TYPE CONFIG_SIEMENS_MACH_TYPE + +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG + +#define CONFIG_SYS_CACHELINE_SIZE 64 + +/* commands to include */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_CACHE + +#define CONFIG_ENV_VARS_UBOOT_CONFIG +#ifndef CONFIG_SPL_BUILD +#define CONFIG_ROOTPATH "/opt/eldk" +#endif + +#define CONFIG_ENV_OVERWRITE 1 +#define CONFIG_ENV_IS_NOWHERE + +#define CONFIG_SYS_LONGHELP +#define CONFIG_CMDLINE_EDITING +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_AUTOLOAD "yes" + +/* Clock Defines */ +#define V_OSCK 24000000 /* Clock output from T2 */ +#define V_SCLK (V_OSCK) + +/* We set the max number of command args high to avoid HUSH bugs. */ +#define CONFIG_SYS_MAXARGS 32 + +/* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 512 + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ + + sizeof(CONFIG_SYS_PROMPT) + 16) + +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +/* + * memtest works on 8 MB in DRAM after skipping 32MB from + * start addr of ram disk + */ +#define CONFIG_SYS_MEMTEST_START (PHYS_DRAM_1 + (64 * 1024 * 1024)) +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START \ + + (8 * 1024 * 1024)) + +#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */ +#define CONFIG_SYS_HZ 1000 /* 1ms clock */ + +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_OMAP_HSMMC +#define CONFIG_CMD_MMC +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_FAT +#define CONFIG_CMD_EXT2 + +#define CONFIG_SPI +#define CONFIG_OMAP3_SPI +#define CONFIG_MTD_DEVICE +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_WINBOND +#define CONFIG_CMD_SF +#define CONFIG_SF_DEFAULT_SPEED (75000000) + + /* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ +#define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */ + +#define CONFIG_SYS_SDRAM_BASE PHYS_DRAM_1 +#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ + GENERATED_GBL_DATA_SIZE) + /* Platform/Board specific defs */ +#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ +#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ +#define CONFIG_SYS_HZ 1000 + +/* NS16550 Configuration */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SERIAL_MULTI +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK (48000000) +#define CONFIG_SYS_NS16550_COM1 0x44e09000 +#define CONFIG_SYS_NS16550_COM4 0x481a6000 + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_SYS_CONSOLE_INFO_QUIET +#define CONFIG_SERIAL1 1 +#define CONFIG_CONS_INDEX 1 + +/* I2C Configuration */ +#define CONFIG_I2C +#define CONFIG_CMD_I2C +#define CONFIG_HARD_I2C +#define CONFIG_SYS_I2C_SLAVE 1 +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_DRIVER_OMAP24XX_I2C + + +/* Defines for SPL */ +#define CONFIG_SPL +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_TEXT_BASE 0x402F0400 +#define CONFIG_SPL_MAX_SIZE (101 * 1024) +#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR + +#define CONFIG_SPL_BSS_START_ADDR 0x80000000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ + +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ +#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 +#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SPL_FAT_SUPPORT +#define CONFIG_FS_FAT +#define CONFIG_SPL_I2C_SUPPORT + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBDISK_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_YMODEM_SUPPORT + +#define CONFIG_SPL_GPIO_SUPPORT +#define CONFIG_SPL_WATCHDOG_SUPPORT + +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SPL_SPI_LOAD +#define CONFIG_SPL_SPI_BUS 0 +#define CONFIG_SPL_SPI_CS 0 +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 + +#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds" + +#define CONFIG_SPL_BOARD_INIT +#define CONFIG_SPL_NAND_AM33XX_BCH +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_NAND_BASE +#define CONFIG_SPL_NAND_DRIVERS +#define CONFIG_SPL_NAND_ECC +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ + CONFIG_SYS_NAND_PAGE_SIZE) +#define CONFIG_SYS_NAND_PAGE_SIZE 2048 +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) +#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS +#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ + 10, 11, 12, 13, 14, 15, 16, 17, \ + 18, 19, 20, 21, 22, 23, 24, 25, \ + 26, 27, 28, 29, 30, 31, 32, 33, \ + 34, 35, 36, 37, 38, 39, 40, 41, \ + 42, 43, 44, 45, 46, 47, 48, 49, \ + 50, 51, 52, 53, 54, 55, 56, 57, } + +#define CONFIG_SYS_NAND_ECCSIZE 512 +#define CONFIG_SYS_NAND_ECCBYTES 14 + +#define CONFIG_SYS_NAND_ECCSTEPS 4 +#define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \ + CONFIG_SYS_NAND_ECCSTEPS) + +#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE + +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 + +/* + * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM + * 64 bytes before this address should be set aside for u-boot.img's + * header. That is 0x800FFFC0--0x80100000 should not be used for any + * other needs. + */ +#define CONFIG_SYS_TEXT_BASE 0x80100000 +#define CONFIG_SYS_SPL_MALLOC_START 0x80208000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 + +/* + * Since SPL did pll and ddr initialization for us, + * we don't need to do it twice. + */ +#ifndef CONFIG_SPL_BUILD +#define CONFIG_SKIP_LOWLEVEL_INIT +#endif + +#ifndef CONFIG_SPL_BUILD +/* + * USB configuration + */ +#define CONFIG_USB_MUSB_DSPS +#define CONFIG_ARCH_MISC_INIT +#define CONFIG_MUSB_GADGET +#define CONFIG_MUSB_PIO_ONLY +#define CONFIG_MUSB_DISABLE_BULK_COMBINE_SPLIT +#define CONFIG_USB_GADGET_DUALSPEED +#define CONFIG_USB_GADGET_VBUS_DRAW 2 +#define CONFIG_MUSB_HOST + +#define CONFIG_AM335X_USB0 +#define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL +#define CONFIG_AM335X_USB1 +#define CONFIG_AM335X_USB1_MODE MUSB_HOST +#ifdef CONFIG_MUSB_HOST +#define CONFIG_CMD_USB +#define CONFIG_USB_STORAGE +#endif + +#ifdef CONFIG_MUSB_GADGET +#define CONFIG_USB_ETHER +#define CONFIG_USB_ETH_RNDIS +#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00" +#endif /* CONFIG_MUSB_GADGET */ + +#define CONFIG_USB_GADGET +#define CONFIG_USBDOWNLOAD_GADGET + +/* USB TI's IDs */ +#define CONFIG_USBD_HS +#define CONFIG_G_DNL_VENDOR_NUM 0x0525 +#define CONFIG_G_DNL_PRODUCT_NUM 0x4a47 +#define CONFIG_G_DNL_MANUFACTURER "Texas Instruments" + +/* USB Device Firmware Update support */ +#define CONFIG_DFU_FUNCTION +#define CONFIG_DFU_NAND +#define CONFIG_CMD_DFU +#define CONFIG_SYS_DFU_DATA_BUF_SIZE (1 << 20) + +#endif /* CONFIG_SPL_BUILD */ + +/* + * Default to using SPI for environment, etc. We have multiple copies + * of SPL as the ROM will check these locations. + * 0x0 - 0x20000 : First copy of SPL + * 0x20000 - 0x40000 : Second copy of SPL + * 0x40000 - 0x60000 : Third copy of SPL + * 0x60000 - 0x80000 : Fourth copy of SPL + * 0x80000 - 0xDF000 : U-Boot + * 0xDF000 - 0xE0000 : U-Boot Environment + * 0xE0000 - 0x442000 : Linux Kernel + * 0x442000 - 0x800000 : Userland + */ +#if defined(CONFIG_SPI_BOOT) +# undef CONFIG_ENV_IS_NOWHERE +# define CONFIG_ENV_IS_IN_SPI_FLASH +# define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED +# define CONFIG_ENV_OFFSET (892 << 10) /* 892 KiB in */ +# define CONFIG_ENV_SECT_SIZE (4 << 10) /* 4 KB sectors */ +#endif /* SPI support */ + +/* Unsupported features */ +#undef CONFIG_USE_IRQ + +#define CONFIG_CMD_NET +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING +#define CONFIG_DRIVER_TI_CPSW +#define CONFIG_MII +#define CONFIG_PHY_GIGE +#define CONFIG_PHYLIB +#define CONFIG_CMD_MII +#define CONFIG_BOOTP_DEFAULT +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_NET_RETRY_COUNT 10 +#define CONFIG_NET_MULTI + +#define CONFIG_NAND +/* NAND support */ +#ifdef CONFIG_NAND +#define CONFIG_CMD_NAND +#define CONFIG_CMD_MTDPARTS + +#define MTDIDS_NAME_STR "omap2-nand.0" +#define MTDIDS_DEFAULT "nand0=" MTDIDS_NAME_STR +#define MTDPARTS_DEFAULT "mtdparts=" MTDIDS_NAME_STR ":" \ + "128k(spl)," \ + "128k(spl.backup1)," \ + "128k(spl.backup2)," \ + "128k(spl.backup3)," \ + "1920k(u-boot)," \ + "128k(uboot.env)," \ + "5120k(kernel_a)," \ + "5120k(kernel_b)," \ + "8192k(mtdoops)," \ + "-(rootfs)" +/* + * chip-size = 256MiB + *| name | size | address area | + *------------------------------------------------------- + *| spl | 128.000 KiB | 0x 0..0x 1ffff | + *| spl.backup1 | 128.000 KiB | 0x 20000..0x 3ffff | + *| spl.backup2 | 128.000 KiB | 0x 40000..0x 5ffff | + *| spl.backup3 | 128.000 KiB | 0x 60000..0x 7ffff | + *| u-boot | 1.875 MiB | 0x 80000..0x 25ffff | + *| uboot.env | 128.000 KiB | 0x 260000..0x 27ffff | + *| kernel_a | 5.000 MiB | 0x 280000..0x 77ffff | + *| kernel_b | 5.000 MiB | 0x 780000..0x c7ffff | + *| mtdoops | 8.000 MiB | 0x c80000..0x 147ffff | + *| rootfs | 235.500 MiB | 0x 1480000..0x fffffff | + *------------------------------------------------------- + */ + +#define DFU_ALT_INFO_NAND \ + "spl part 0 1;" \ + "spl.backup1 part 0 2;" \ + "spl.backup2 part 0 3;" \ + "spl.backup3 part 0 4;" \ + "u-boot part 0 5;" \ + "u-boot.env part 0 6;" \ + "kernel_a part 0 7;" \ + "kernel_b part 0 8;" \ + "rootfs partubi 0 10" + +#define CONFIG_COMMON_ENV_SETTINGS \ + "verify=no \0" \ + "project_dir=systemone\0" \ + "loadaddr=0x82000000\0" \ + "kloadaddr=0x81000000\0" \ + "script_addr=0x81900000\0" \ + "console=console=ttyMTD,mtdoops console=ttyO0,115200n8\0" \ + "active_set=a\0" \ + "nand_active_ubi_vol=rootfs_a\0" \ + "nand_root_fs_type=ubifs rootwait=1\0" \ + "nand_src_addr=0x280000\0" \ + "nand_src_addr_a=0x280000\0" \ + "nand_src_addr_b=0x780000\0" \ + "nfsopts=nolock rw mem=128M\0" \ + "ip_method=none\0" \ + "bootenv=uEnv.txt\0" \ + "bootargs_defaults=setenv bootargs " \ + "console=${console} " \ + "${optargs}\0" \ + "nand_args=run bootargs_defaults;" \ + "mtdparts default;" \ + "setenv nand_active_ubi_vol rootfs_${active_set};" \ + "setenv ${active_set} true;" \ + "if test -n ${a}; then " \ + "setenv nand_src_addr ${nand_src_addr_a};" \ + "fi;" \ + "if test -n ${b}; then " \ + "setenv nand_src_addr ${nand_src_addr_b};" \ + "fi;" \ + "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \ + "ubi.mtd=9,2048;" \ + "setenv bootargs ${bootargs} " \ + "root=${nand_root} noinitrd ${mtdparts} " \ + "rootfstype=${nand_root_fs_type} ip=${ip_method} " \ + "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \ + "=mtdoops\0" \ + "dfu_args=run bootargs_defaults;" \ + "setenv bootargs ${bootargs} ;" \ + "mtdparts default; " \ + "dfu nand 0; \0" \ + "dfu_alt_info=" DFU_ALT_INFO_NAND "\0" \ + "net_args=run bootargs_defaults;" \ + "mtdparts default;" \ + "setenv bootfile ${project_dir}/kernel/uImage;" \ + "setenv rootpath /home/projects/${project_dir}/rootfs;" \ + "setenv bootargs ${bootargs} " \ + "root=/dev/nfs ${mtdparts} " \ + "nfsroot=${serverip}:${rootpath},${nfsopts} " \ + "addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:" \ + "${gatewayip}:${netmask}:${hostname}:eth0:off\0" \ + "nand_boot=echo Booting from nand, active set ${active_set} ...; " \ + "run nand_args; " \ + "nand read.i ${kloadaddr} ${nand_src_addr} " \ + "${nand_img_size}; bootm ${kloadaddr}\0" \ + "net_nfs=echo Booting from network ...; " \ + "run net_args; " \ + "tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \ + "bootm ${kloadaddr}\0" \ + "flash_self=run nand_boot\0" \ + "flash_self_test=setenv bootargs_defaults ${bootargs_defaults} test; " \ + "run nand_boot\0" \ + "dfu_start=echo Preparing for dfu mode ...; " \ + "run dfu_args; \0" \ + "preboot=echo; "\ + "echo Type 'run flash_self' to use kernel and root " \ + "filesystem on memory; echo Type 'run flash_self_test' to " \ + "use kernel and root filesystem on memory, boot in test " \ + "mode; echo Not ready yet: 'run flash_nfs' to use kernel " \ + "from memory and root filesystem over NFS; echo Type " \ + "'run net_nfs' to get Kernel over TFTP and mount root " \ + "filesystem over NFS; echo Set active_set variable to 'a' " \ + "or 'b' to select kernel and rootfs partition; " \ + "echo" \ + "\0" + +#define CONFIG_NAND_OMAP_GPMC +#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 +#define CONFIG_SYS_NAND_BASE (0x08000000) /* physical address */ + /* to access nand at */ + /* CS0 */ +#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND + devices */ +#if !defined(CONFIG_SPI_BOOT) +#undef CONFIG_ENV_IS_NOWHERE +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */ +#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ +#endif +#endif + +#define CONFIG_OMAP_GPIO + +/* Watchdog */ +#define CONFIG_HW_WATCHDOG + +/* Stop autoboot with ESC ESC key detected */ +#define CONFIG_AUTOBOOT_KEYED +#define CONFIG_AUTOBOOT_STOP_STR "\x1b\x1b" +#define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds, " \ + "press \"<Esc><Esc>\" to stop\n", bootdelay + +#endif /* ! __CONFIG_SIEMENS_AM33X_COMMON_H */ diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h index 1ed53db..3e82fc2 100644 --- a/include/configs/t4qds.h +++ b/include/configs/t4qds.h @@ -7,24 +7,8 @@ /* * Corenet DS style board configuration file */ -#ifndef __CONFIG_H -#define __CONFIG_H - -#ifdef CONFIG_RAMBOOT_PBL -#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc -#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/t4qds/t4_pbi.cfg -#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/t4qds/t4_rcw.cfg -#endif - -#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE -/* Set 1M boot space */ -#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000) -#define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \ - (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR) -#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc -#define CONFIG_SYS_NO_FLASH -#endif +#ifndef __T4QDS_H +#define __T4QDS_H #define CONFIG_CMD_REGINFO @@ -34,7 +18,6 @@ #define CONFIG_E500MC /* BOOKE e500mc family */ #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ #define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ -#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ #define CONFIG_MP /* support multiple processors */ #ifndef CONFIG_SYS_TEXT_BASE @@ -58,70 +41,16 @@ #define CONFIG_SYS_SRIO #define CONFIG_SRIO1 /* SRIO port 1 */ #define CONFIG_SRIO2 /* SRIO port 2 */ -#define CONFIG_SRIO_PCIE_BOOT_MASTER #define CONFIG_FSL_LAW /* Use common FSL init code */ #define CONFIG_ENV_OVERWRITE -#ifdef CONFIG_SYS_NO_FLASH -#if !defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL) -#define CONFIG_ENV_IS_NOWHERE -#endif -#else -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE -#endif - -#if defined(CONFIG_SPIFLASH) -#define CONFIG_SYS_EXTRA_ENV_RELOC -#define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_ENV_SPI_BUS 0 -#define CONFIG_ENV_SPI_CS 0 -#define CONFIG_ENV_SPI_MAX_HZ 10000000 -#define CONFIG_ENV_SPI_MODE 0 -#define CONFIG_ENV_SIZE 0x2000 /* 8KB */ -#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ -#define CONFIG_ENV_SECT_SIZE 0x10000 -#elif defined(CONFIG_SDCARD) -#define CONFIG_SYS_EXTRA_ENV_RELOC -#define CONFIG_ENV_IS_IN_MMC -#define CONFIG_SYS_MMC_ENV_DEV 0 -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_OFFSET (512 * 1097) -#elif defined(CONFIG_NAND) -#define CONFIG_SYS_EXTRA_ENV_RELOC -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE -#define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE) -#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) -#define CONFIG_ENV_IS_IN_REMOTE -#define CONFIG_ENV_ADDR 0xffe20000 -#define CONFIG_ENV_SIZE 0x2000 -#elif defined(CONFIG_ENV_IS_NOWHERE) -#define CONFIG_ENV_SIZE 0x2000 -#else -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ -#endif - -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() -#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() - -#ifndef __ASSEMBLY__ -unsigned long get_board_sys_clk(void); -unsigned long get_board_ddr_clk(void); -#endif - /* * These can be toggled for performance analysis, otherwise use default. */ #define CONFIG_SYS_CACHE_STASHING #define CONFIG_BTB /* toggle branch predition */ -#define CONFIG_DDR_ECC #ifdef CONFIG_DDR_ECC #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER #define CONFIG_MEM_INIT_VALUE 0xdeadbeef @@ -129,14 +58,9 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_ENABLE_36BIT_PHYS -#ifdef CONFIG_PHYS_64BIT #define CONFIG_ADDR_MAP #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ -#endif -#if 0 -#define CONFIG_POST CONFIG_SYS_POST_MEMORY /* test POST memory test */ -#endif #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x00400000 #define CONFIG_SYS_ALT_MEMTEST @@ -147,17 +71,8 @@ unsigned long get_board_ddr_clk(void); */ #define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE -#ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_DCSRBAR 0xf0000000 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull -#endif - -/* EEPROM */ -#define CONFIG_ID_EEPROM -#define CONFIG_SYS_I2C_EEPROM_NXID -#define CONFIG_SYS_EEPROM_BUS_NUM 0 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* * DDR Setup @@ -174,199 +89,16 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_DDR_SPD #define CONFIG_FSL_DDR3 -#define CONFIG_SYS_SPD_BUS_NUM 0 -#define SPD_EEPROM_ADDRESS1 0x51 -#define SPD_EEPROM_ADDRESS2 0x52 -#define SPD_EEPROM_ADDRESS3 0x53 -#define SPD_EEPROM_ADDRESS4 0x54 -#define SPD_EEPROM_ADDRESS5 0x55 -#define SPD_EEPROM_ADDRESS6 0x56 -#define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 /* for p3041/p5010 */ -#define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ /* * IFC Definitions */ #define CONFIG_SYS_FLASH_BASE 0xe0000000 -#ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) -#else -#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE -#endif - -#define CONFIG_SYS_NOR0_CSPR_EXT (0xf) -#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ - + 0x8000000) | \ - CSPR_PORT_SIZE_16 | \ - CSPR_MSEL_NOR | \ - CSPR_V) -#define CONFIG_SYS_NOR1_CSPR_EXT (0xf) -#define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ - CSPR_PORT_SIZE_16 | \ - CSPR_MSEL_NOR | \ - CSPR_V) -#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) -/* NOR Flash Timing Params */ -#define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 - -#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ - FTIM0_NOR_TEADC(0x5) | \ - FTIM0_NOR_TEAHC(0x5)) -#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ - FTIM1_NOR_TRAD_NOR(0x1A) |\ - FTIM1_NOR_TSEQRAD_NOR(0x13)) -#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ - FTIM2_NOR_TCH(0x4) | \ - FTIM2_NOR_TWPH(0x0E) | \ - FTIM2_NOR_TWP(0x1c)) -#define CONFIG_SYS_NOR_FTIM3 0x0 - -#define CONFIG_SYS_FLASH_QUIET_TEST -#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ - -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ -#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ - -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \ - + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} - -#define CONFIG_FSL_QIXIS /* use common QIXIS code */ -#define QIXIS_BASE 0xffdf0000 -#define QIXIS_LBMAP_SWITCH 6 -#define QIXIS_LBMAP_MASK 0x0f -#define QIXIS_LBMAP_SHIFT 0 -#define QIXIS_LBMAP_DFLTBANK 0x00 -#define QIXIS_LBMAP_ALTBANK 0x04 -#define QIXIS_RST_CTL_RESET 0x83 -#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 -#define QIXIS_RCFG_CTL_RECONFIG_START 0x21 -#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 -#ifdef CONFIG_PHYS_64BIT -#define QIXIS_BASE_PHYS (0xf00000000ull | QIXIS_BASE) -#else -#define QIXIS_BASE_PHYS QIXIS_BASE -#endif - -#define CONFIG_SYS_CSPR3_EXT (0xf) -#define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \ - | CSPR_PORT_SIZE_8 \ - | CSPR_MSEL_GPCM \ - | CSPR_V) -#define CONFIG_SYS_AMASK3 IFC_AMASK(4 * 1024) -#define CONFIG_SYS_CSOR3 0x0 -/* QIXIS Timing parameters for IFC CS3 */ -#define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ - FTIM0_GPCM_TEADC(0x0e) | \ - FTIM0_GPCM_TEAHC(0x0e)) -#define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ - FTIM1_GPCM_TRAD(0x3f)) -#define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ - FTIM2_GPCM_TCH(0x0) | \ - FTIM2_GPCM_TWP(0x1f)) -#define CONFIG_SYS_CS3_FTIM3 0x0 - -/* NAND Flash on IFC */ -#define CONFIG_NAND_FSL_IFC -#define CONFIG_SYS_NAND_BASE 0xff800000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) -#else -#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE -#endif -#define CONFIG_SYS_NAND_CSPR_EXT (0xf) -#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ - | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ - | CSPR_MSEL_NAND /* MSEL = NAND */ \ - | CSPR_V) -#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) - -#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ - | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ - | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ - | CSOR_NAND_RAL_3 /* RAL = 2Byes */ \ - | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ - | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \ - | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ - -#define CONFIG_SYS_NAND_ONFI_DETECTION - -/* ONFI NAND Flash mode0 Timing Params */ -#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ - FTIM0_NAND_TWP(0x18) | \ - FTIM0_NAND_TWCHT(0x07) | \ - FTIM0_NAND_TWH(0x0a)) -#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ - FTIM1_NAND_TWBE(0x39) | \ - FTIM1_NAND_TRR(0x0e) | \ - FTIM1_NAND_TRP(0x18)) -#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ - FTIM2_NAND_TREH(0x0a) | \ - FTIM2_NAND_TWHRE(0x1e)) -#define CONFIG_SYS_NAND_FTIM3 0x0 - -#define CONFIG_SYS_NAND_DDR_LAW 11 - -#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE -#define CONFIG_CMD_NAND - -#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) - -#if defined(CONFIG_NAND) -#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT -#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR -#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK -#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR -#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 -#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 -#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 -#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 -#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR0_CSPR_EXT -#define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR0_CSPR -#define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR -#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 -#else -#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT -#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR -#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR -#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 -#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT -#define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR -#define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK -#define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR -#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0 -#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1 -#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2 -#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 -#endif -#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT -#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR -#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK -#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR -#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 -#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 -#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 -#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if defined(CONFIG_RAMBOOT_PBL) -#define CONFIG_SYS_RAMBOOT -#endif - #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ #define CONFIG_MISC_INIT_R @@ -376,18 +108,12 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_L1_INIT_RAM #define CONFIG_SYS_INIT_RAM_LOCK #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ -#ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe0ec000 /* The assembler doesn't like typecast */ #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) -#else -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS 0xfe0ec000 /* Initial L1 address */ -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS -#endif #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ @@ -431,149 +157,55 @@ unsigned long get_board_ddr_clk(void); /* I2C */ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_FSL -#define CONFIG_SYS_FSL_I2C_SPEED 100000 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 -#define CONFIG_SYS_FSL_I2C2_SPEED 100000 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 -#define I2C_MUX_PCA_ADDR_PRI 0x77 /* I2C bus multiplexer,primary */ -#define I2C_MUX_PCA_ADDR_SEC 0x76 /* I2C bus multiplexer,secondary */ - -#define I2C_MUX_CH_DEFAULT 0x8 -#define I2C_MUX_CH_VOL_MONITOR 0xa -#define I2C_MUX_CH_VSC3316_FS 0xc -#define I2C_MUX_CH_VSC3316_BS 0xd - -/* Voltage monitor on channel 2*/ -#define I2C_VOL_MONITOR_ADDR 0x40 -#define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 -#define I2C_VOL_MONITOR_BUS_V_OVF 0x1 -#define I2C_VOL_MONITOR_BUS_V_SHIFT 3 - -/* VSC Crossbar switches */ -#define CONFIG_VSC_CROSSBAR -#define VSC3316_FSM_TX_ADDR 0x70 -#define VSC3316_FSM_RX_ADDR 0x71 - /* * RapidIO */ #define CONFIG_SYS_SRIO1_MEM_VIRT 0xa0000000 -#ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_SRIO1_MEM_PHYS 0xc20000000ull -#else -#define CONFIG_SYS_SRIO1_MEM_PHYS 0xa0000000 -#endif #define CONFIG_SYS_SRIO1_MEM_SIZE 0x10000000 /* 256M */ #define CONFIG_SYS_SRIO2_MEM_VIRT 0xb0000000 -#ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_SRIO2_MEM_PHYS 0xc30000000ull -#else -#define CONFIG_SYS_SRIO2_MEM_PHYS 0xb0000000 -#endif #define CONFIG_SYS_SRIO2_MEM_SIZE 0x10000000 /* 256M */ /* - * for slave u-boot IMAGE instored in master memory space, - * PHYS must be aligned based on the SIZE - */ -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x80000 /* 512K */ -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff80000ull -/* - * for slave UCODE and ENV instored in master memory space, - * PHYS must be aligned based on the SIZE - */ -#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef040000ull -#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull -#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ - -/* slave core release by master*/ -#define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4 -#define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */ - -/* - * SRIO_PCIE_BOOT - SLAVE - */ -#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE -#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000 -#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \ - (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR) -#endif -/* - * eSPI - Enhanced SPI - */ -#define CONFIG_FSL_ESPI -#define CONFIG_SPI_FLASH -#define CONFIG_SPI_FLASH_SST -#define CONFIG_CMD_SF -#define CONFIG_SF_DEFAULT_SPEED 10000000 -#define CONFIG_SF_DEFAULT_MODE 0 - -/* * General PCI * Memory space is mapped 1-1, but I/O space must start from 0. */ /* controller 1, direct to uli, tgtid 3, Base address 20000 */ #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 -#ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull -#else -#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 -#define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 -#endif #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 -#ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull -#else -#define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000 -#endif #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ /* controller 2, Slot 2, tgtid 2, Base address 201000 */ #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 -#ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull -#else -#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 -#define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 -#endif #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 -#ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull -#else -#define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000 -#endif #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ /* controller 3, Slot 1, tgtid 1, Base address 202000 */ #define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000 -#ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull -#else -#define CONFIG_SYS_PCIE3_MEM_BUS 0xc0000000 -#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc0000000 -#endif #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 -#ifdef CONFIG_PHYS_64BIT #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull -#else -#define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000 -#endif #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ /* controller 4, Base address 203000 */ @@ -584,84 +216,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ -/* Qman/Bman */ -#ifndef CONFIG_NOBQFMAN -#define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ -#define CONFIG_SYS_BMAN_NUM_PORTALS 50 -#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull -#else -#define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE -#endif -#define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 -#define CONFIG_SYS_QMAN_NUM_PORTALS 50 -#define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull -#else -#define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE -#endif -#define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 - -#define CONFIG_SYS_DPAA_FMAN -#define CONFIG_SYS_DPAA_PME -#define CONFIG_SYS_PMAN -#define CONFIG_SYS_DPAA_DCE -#define CONFIG_SYS_INTERLAKEN - -/* Default address of microcode for the Linux Fman driver */ -#if defined(CONFIG_SPIFLASH) -/* - * env is stored at 0x100000, sector size is 0x10000, ucode is stored after - * env, so we got 0x110000. - */ -#define CONFIG_SYS_QE_FW_IN_SPIFLASH -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0x110000 -#elif defined(CONFIG_SDCARD) -/* - * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is - * about 545KB (1089 blocks), Env is stored after the image, and the env size is - * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130. - */ -#define CONFIG_SYS_QE_FMAN_FW_IN_MMC -#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1130) -#elif defined(CONFIG_NAND) -#define CONFIG_SYS_QE_FMAN_FW_IN_NAND -#define CONFIG_SYS_QE_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE) -#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) -/* - * Slave has no ucode locally, it can fetch this from remote. When implementing - * in two corenet boards, slave's ucode could be stored in master's memory - * space, the address can be mapped from slave TLB->slave LAW-> - * slave SRIO or PCIE outbound window->master inbound window-> - * master LAW->the ucode address in master's memory space. - */ -#define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xFFE00000 -#else -#define CONFIG_SYS_QE_FMAN_FW_IN_NOR -#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000 -#endif -#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 -#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) -#endif /* CONFIG_NOBQFMAN */ - -#ifdef CONFIG_SYS_DPAA_FMAN -#define CONFIG_FMAN_ENET -#define CONFIG_PHYLIB_10G -#define CONFIG_PHY_VITESSE -#define CONFIG_PHY_TERANETICS -#define SGMII_CARD_PORT1_PHY_ADDR 0x1C -#define SGMII_CARD_PORT2_PHY_ADDR 0x1D -#define SGMII_CARD_PORT3_PHY_ADDR 0x1E -#define SGMII_CARD_PORT4_PHY_ADDR 0x1F -#define FM1_10GEC1_PHY_ADDR 0x0 -#define FM1_10GEC2_PHY_ADDR 0x1 -#define FM2_10GEC1_PHY_ADDR 0x2 -#define FM2_10GEC2_PHY_ADDR 0x3 -#endif - #ifdef CONFIG_PCI #define CONFIG_PCI_INDIRECT_BRIDGE #define CONFIG_NET_MULTI @@ -724,30 +278,6 @@ unsigned long get_board_ddr_clk(void); #endif /* -* USB -*/ -#define CONFIG_CMD_USB -#define CONFIG_USB_STORAGE -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_FSL -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_CMD_EXT2 -#define CONFIG_HAS_FSL_DR_USB - -#define CONFIG_MMC - -#ifdef CONFIG_MMC -#define CONFIG_FSL_ESDHC -#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR -#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT -#define CONFIG_CMD_MMC -#define CONFIG_GENERIC_MMC -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_DOS_PARTITION -#endif - -/* * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ @@ -788,112 +318,11 @@ unsigned long get_board_ddr_clk(void); /* default location for tftp and bootm */ #define CONFIG_LOADADDR 1000000 -#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ #define CONFIG_BAUDRATE 115200 -#define __USB_PHY_TYPE utmi - -/* - * T4240 has 3 DDR controllers. Default to 3way_4KB interleaving. It can be - * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to - * cacheline interleaving. It can be cacheline, page, bank, superbank. - * See doc/README.fsl-ddr for details. - */ -#ifdef CONFIG_PPC_T4240 -#define CTRL_INTLV_PREFERED 3way_4KB -#else -#define CTRL_INTLV_PREFERED cacheline -#endif - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "hwconfig=fsl_ddr:" \ - "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \ - "bank_intlv=auto;" \ - "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ - "netdev=eth0\0" \ - "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ - "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ - "tftpflash=tftpboot $loadaddr $uboot && " \ - "protect off $ubootaddr +$filesize && " \ - "erase $ubootaddr +$filesize && " \ - "cp.b $loadaddr $ubootaddr $filesize && " \ - "protect on $ubootaddr +$filesize && " \ - "cmp.b $loadaddr $ubootaddr $filesize\0" \ - "consoledev=ttyS0\0" \ - "ramdiskaddr=2000000\0" \ - "ramdiskfile=t4240qds/ramdisk.uboot\0" \ - "fdtaddr=c00000\0" \ - "fdtfile=t4240qds/t4240qds.dtb\0" \ - "bdev=sda3\0" \ - "c=ffe\0" - -/* For emulation this causes u-boot to jump to the start of the proof point - app code automatically */ -#define CONFIG_PROOF_POINTS \ - "setenv bootargs root=/dev/$bdev rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "cpu 1 release 0x29000000 - - -;" \ - "cpu 2 release 0x29000000 - - -;" \ - "cpu 3 release 0x29000000 - - -;" \ - "cpu 4 release 0x29000000 - - -;" \ - "cpu 5 release 0x29000000 - - -;" \ - "cpu 6 release 0x29000000 - - -;" \ - "cpu 7 release 0x29000000 - - -;" \ - "go 0x29000000" - #define CONFIG_HVBOOT \ "setenv bootargs config-addr=0x60000000; " \ "bootm 0x01000000 - 0x00f00000" -#define CONFIG_ALU \ - "setenv bootargs root=/dev/$bdev rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "cpu 1 release 0x01000000 - - -;" \ - "cpu 2 release 0x01000000 - - -;" \ - "cpu 3 release 0x01000000 - - -;" \ - "cpu 4 release 0x01000000 - - -;" \ - "cpu 5 release 0x01000000 - - -;" \ - "cpu 6 release 0x01000000 - - -;" \ - "cpu 7 release 0x01000000 - - -;" \ - "go 0x01000000" - -#define CONFIG_LINUX \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "setenv ramdiskaddr 0x02000000;" \ - "setenv fdtaddr 0x00c00000;" \ - "setenv loadaddr 0x1000000;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_HDBOOT \ - "setenv bootargs root=/dev/$bdev rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define CONFIG_NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - -#define CONFIG_RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_BOOTCOMMAND CONFIG_LINUX - -#ifdef CONFIG_SECURE_BOOT -#include <asm/fsl_secure_boot.h> -#endif - #endif /* __CONFIG_H */ diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h index c297827..60dd8ff 100644 --- a/include/configs/tam3517-common.h +++ b/include/configs/tam3517-common.h @@ -16,6 +16,7 @@ #define CONFIG_OMAP /* in a TI OMAP core */ #define CONFIG_OMAP34XX /* which is a 34XX */ #define CONFIG_OMAP_GPIO +#define CONFIG_OMAP_COMMON #define CONFIG_SYS_TEXT_BASE 0x80008000 @@ -214,7 +215,6 @@ #define CONFIG_DRIVER_TI_EMAC_USE_RMII #define CONFIG_MII #define CONFIG_EMAC_MDIO_PHY_NUM 0 -#define CONFIG_BOOTP_DEFAULT #define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h index ccd68a1..ba6c6bb 100644 --- a/include/configs/tegra-common.h +++ b/include/configs/tegra-common.h @@ -17,8 +17,6 @@ #define CONFIG_TEGRA /* which is a Tegra generic machine */ #define CONFIG_SYS_L2CACHE_OFF /* No L2 cache */ -#define CONFIG_SYS_CACHELINE_SIZE 32 - #include <asm/arch/tegra.h> /* get chip and board defs */ /* @@ -135,6 +133,7 @@ #define CONFIG_CMD_GPIO #define CONFIG_CMD_ENTERRCM #define CONFIG_CMD_BOOTZ +#define CONFIG_SUPPORT_RAW_INITRD /* Defines for SPL */ #define CONFIG_SPL diff --git a/include/configs/tegra114-common.h b/include/configs/tegra114-common.h index 44e98e5..c3de9a9 100644 --- a/include/configs/tegra114-common.h +++ b/include/configs/tegra114-common.h @@ -18,6 +18,9 @@ #define _TEGRA114_COMMON_H_ #include "tegra-common.h" +/* Cortex-A15 uses a cache line size of 64 bytes */ +#define CONFIG_SYS_CACHELINE_SIZE 64 + /* * NS16550 Configuration */ diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h index d5e9ee4..b009a31 100644 --- a/include/configs/tegra20-common.h +++ b/include/configs/tegra20-common.h @@ -9,6 +9,9 @@ #define _TEGRA20_COMMON_H_ #include "tegra-common.h" +/* Cortex-A9 uses a cache line size of 32 bytes */ +#define CONFIG_SYS_CACHELINE_SIZE 32 + /* * Errata configuration */ diff --git a/include/configs/tegra30-common.h b/include/configs/tegra30-common.h index 5ac8816..99acbfd 100644 --- a/include/configs/tegra30-common.h +++ b/include/configs/tegra30-common.h @@ -9,6 +9,9 @@ #define _TEGRA30_COMMON_H_ #include "tegra-common.h" +/* Cortex-A9 uses a cache line size of 32 bytes */ +#define CONFIG_SYS_CACHELINE_SIZE 32 + /* * Errata configuration */ diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h index eac5ad0..2fc2c10 100644 --- a/include/configs/ti814x_evm.h +++ b/include/configs/ti814x_evm.h @@ -20,12 +20,10 @@ #define CONFIG_TI814X #define CONFIG_SYS_NO_FLASH #define CONFIG_OMAP +#define CONFIG_OMAP_COMMON #include <asm/arch/omap.h> -#define CONFIG_DMA_COHERENT -#define CONFIG_DMA_COHERENT_SIZE (1 << 20) - #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ #define CONFIG_SYS_MALLOC_LEN (1024 << 10) #define CONFIG_SYS_LONGHELP /* undef to save memory */ @@ -119,7 +117,7 @@ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_MEMTEST_START PHYS_DRAM_1 +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START \ + PHYS_DRAM_1_SIZE - (8 << 12)) @@ -139,11 +137,10 @@ * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 /* 1 banks of DRAM */ -#define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */ #define PHYS_DRAM_1_SIZE 0x20000000 /* 512MB */ #define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1024MB */ -#define CONFIG_SYS_SDRAM_BASE PHYS_DRAM_1 +#define CONFIG_SYS_SDRAM_BASE 0x80000000 #define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ GENERATED_GBL_DATA_SIZE) @@ -229,7 +226,6 @@ #define CONFIG_CMD_MII #define CONFIG_DRIVER_TI_CPSW #define CONFIG_MII -#define CONFIG_BOOTP_DEFAULT #define CONFIG_BOOTP_DNS #define CONFIG_BOOTP_DNS2 #define CONFIG_BOOTP_SEND_HOSTNAME diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h new file mode 100644 index 0000000..e90490c --- /dev/null +++ b/include/configs/ti816x_evm.h @@ -0,0 +1,180 @@ +/* + * ti816x_evm.h + * + * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com> + * Antoine Tenart, <atenart@adeneo-embedded.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_TI816X_EVM_H +#define __CONFIG_TI816X_EVM_H + +#define CONFIG_TI81XX +#define CONFIG_TI816X +#define CONFIG_SYS_NO_FLASH +#define CONFIG_OMAP +#define CONFIG_OMAP_COMMON + +#define CONFIG_ARCH_CPU_INIT + +#include <asm/arch/omap.h> + +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (32 * 1024)) +#define CONFIG_SYS_LONGHELP /* undef save memory */ +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT "u-boot/ti816x# " +#define CONFIG_MACH_TYPE MACH_TYPE_TI8168EVM + +#define CONFIG_OF_LIBFDT +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG /* required for ramdisk support */ + +#include <config_cmd_default.h> /* u-boot default commands */ + +#define CONFIG_VERSION_VARIABLE +#define CONFIG_DISPLAY_CPUINFO + +#define CONFIG_BOOTDELAY 3 /* set negative for no autoboot */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "loadaddr=0x81000000\0" \ + +#define CONFIG_BOOTCOMMAND \ + "mmc rescan;" \ + "fatload mmc 0 ${loadaddr} uImage;" \ + "bootm ${loadaddr}" \ + +#define CONFIG_BOOTARGS "console=ttyO2,115200n8 noinitrd earlyprintk" + +/* Clock Defines */ +#define V_OSCK 24000000 /* Clock output from T2 */ +#define V_SCLK (V_OSCK >> 1) + +#define CONFIG_SYS_MAXARGS 32 +#define CONFIG_SYS_CBSIZE 512 /* console I/O buffer size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ + + sizeof(CONFIG_SYS_PROMPT) + 16) /* print buffer size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* boot arg buffer size */ + +#undef CONFIG_SYS_CLKS_IN_HZ +#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */ +#define CONFIG_SYS_HZ 1000 /* 1ms clock */ + +#define CONFIG_CMD_ASKEN +#define CONFIG_CMD_ECHO +#define CONFIG_OMAP_GPIO +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_OMAP_HSMMC +#define CONFIG_CMD_MMC +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_FAT +#define CONFIG_CMD_EXT2 + +#define CONFIG_FS_FAT + +/* + * Only one of the following two options (DDR3/DDR2) should be enabled + * CONFIG_TI816X_EVM_DDR2 + * CONFIG_TI816X_EVM_DDR3 + */ +#define CONFIG_TI816X_EVM_DDR3 + +/* + * Supported values: 400, 531, 675 or 796 MHz + */ +#define CONFIG_TI816X_DDR_PLL_796 + +#define CONFIG_TI816X_USE_EMIF0 1 +#define CONFIG_TI816X_USE_EMIF1 1 + + +#define CONFIG_NR_DRAM_BANKS 2 /* we have 2 banks of DRAM */ +#define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */ +#define PHYS_DRAM_1_SIZE 0x40000000 /* 1 GB */ +#define PHYS_DRAM_2 0xC0000000 /* DRAM Bank #2 */ +#define PHYS_DRAM_2_SIZE 0x40000000 /* 1 GB */ + +#define CONFIG_MAX_RAM_BANK_SIZE (2048 << 20) /* 2048MB */ +#define CONFIG_SYS_SDRAM_BASE PHYS_DRAM_1 +#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ + GENERATED_GBL_DATA_SIZE) + +/** + * Platform/Board specific defs + */ +#define CONFIG_SYS_CLK_FREQ 27000000 +#define CONFIG_SYS_TIMERBASE 0x4802E000 +#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ + +#undef CONFIG_NAND_OMAP_GPMC + +/* + * NS16550 Configuration + */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK (48000000) +#define CONFIG_SYS_NS16550_COM1 0x48024000 /* Base EVM has UART2 */ + +#define CONFIG_BAUDRATE 115200 + +/* allow overwriting serial config and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_SERIAL1 +#define CONFIG_SERIAL2 +#define CONFIG_SERIAL3 +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_CONSOLE_INFO_QUIET + +#define CONFIG_ENV_IS_NOWHERE + +/* SPL */ +/* Defines for SPL */ +#define CONFIG_SPL +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_TEXT_BASE 0x40400000 +#define CONFIG_SPL_MAX_SIZE ((128 - 18) * 1024) +#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR + +#define CONFIG_SPL_BSS_START_ADDR 0x80000000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ + +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ +#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 +#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SPL_FAT_SUPPORT + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBDISK_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_GPIO_SUPPORT +#define CONFIG_SPL_YMODEM_SUPPORT +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 +#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000 +#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" + +#define CONFIG_SPL_BOARD_INIT + +#define CONFIG_SYS_TEXT_BASE 0x80800000 +#define CONFIG_SYS_SPL_MALLOC_START 0x80208000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 + +/* Since SPL did pll and ddr initialization for us, + * we don't need to do it twice. + */ +#ifndef CONFIG_SPL_BUILD +#define CONFIG_SKIP_LOWLEVEL_INIT +#endif + +/* Unsupported features */ +#undef CONFIG_USE_IRQ + +#endif diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h new file mode 100644 index 0000000..d2e34ae --- /dev/null +++ b/include/configs/ti_am335x_common.h @@ -0,0 +1,64 @@ +/* + * ti_am335x_common.h + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + * + * For more details, please see the technical documents listed at + * http://www.ti.com/product/am3359#technicaldocuments + */ + +#ifndef __CONFIG_TI_AM335X_COMMON_H__ +#define __CONFIG_TI_AM335X_COMMON_H__ + +#define CONFIG_AM33XX +#define CONFIG_BOARD_LATE_INIT +#define CONFIG_ARCH_CPU_INIT +#define CONFIG_SYS_CACHELINE_SIZE 64 +#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ +#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ + +#include <asm/arch/omap.h> + +/* NS16550 Configuration */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK 48000000 + +/* Network defines. */ +#define CONFIG_CMD_NET /* 'bootp' and 'tftp' */ +#define CONFIG_CMD_DHCP +#define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */ +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_NET_RETRY_COUNT 10 +#define CONFIG_CMD_PING +#define CONFIG_DRIVER_TI_CPSW /* Driver for IP block */ +#define CONFIG_MII /* Required in net/eth.c */ + +/* + * SPL related defines. The Public RAM memory map the ROM defines the + * area between 0x402F0400 and 0x4030B800 as a download area and + * 0x4030B800 to 0x4030CE00 as a public stack area. The ROM also + * supports X-MODEM loading via UART, and we leverage this and then use + * Y-MODEM to load u-boot.img, when booted over UART. + */ +#define CONFIG_SPL_TEXT_BASE 0x402F0400 +#define CONFIG_SPL_MAX_SIZE (0x4030B800 - CONFIG_SPL_TEXT_BASE) + +/* + * Since SPL did pll and ddr initialization for us, + * we don't need to do it twice. + */ +#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_NOR_BOOT) +#define CONFIG_SKIP_LOWLEVEL_INIT +#endif + +/* Now bring in the rest of the common code. */ +#include <configs/ti_armv7_common.h> + +#endif /* __CONFIG_TI_AM335X_COMMON_H__ */ diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h new file mode 100644 index 0000000..e89e874 --- /dev/null +++ b/include/configs/ti_armv7_common.h @@ -0,0 +1,252 @@ +/* + * ti_armv7_common.h + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + * + * The various ARMv7 SoCs from TI all share a number of IP blocks when + * implementing a given feature. Rather than define these in every + * board or even SoC common file, we define a common file to be re-used + * in all cases. While technically true that some of these details are + * configurable at the board design, they are common throughout SoC + * reference platforms as well as custom designs and become de facto + * standards. + */ + +#ifndef __CONFIG_TI_ARMV7_COMMON_H__ +#define __CONFIG_TI_ARMV7_COMMON_H__ + +/* Common define for many platforms. */ +#define CONFIG_OMAP +#define CONFIG_OMAP_COMMON + +/* + * We typically do not contain NOR flash. In the cases where we do, we + * undefine this later. + */ +#define CONFIG_SYS_NO_FLASH + +/* Support both device trees and ATAGs. */ +#define CONFIG_OF_LIBFDT +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG + +/* + * Our DDR memory always starts at 0x80000000 and U-Boot shall have + * relocated itself to higher in memory by the time this value is used. + */ +#define CONFIG_SYS_LOAD_ADDR 0x80000000 + +/* + * Default to a quick boot delay. + */ +#define CONFIG_BOOTDELAY 1 + +/* + * DDR information. We say (for simplicity) that we have 1 bank, + * always, even when we have more. We always start at 0x80000000, + * and we place the initial stack pointer in our SRAM. + */ +#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_SYS_SDRAM_BASE 0x80000000 +#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ + GENERATED_GBL_DATA_SIZE) + +/* Timer information. */ +#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ +#define CONFIG_SYS_HZ 1000 /* 1ms clock */ + +/* I2C IP block */ +#define CONFIG_I2C +#define CONFIG_HARD_I2C +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 1 +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_DRIVER_OMAP24XX_I2C +#define CONFIG_CMD_I2C + +/* MMC/SD IP block */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_OMAP_HSMMC +#define CONFIG_CMD_MMC + +/* McSPI IP block */ +#define CONFIG_SPI +#define CONFIG_OMAP3_SPI +#define CONFIG_CMD_SPI + +/* GPIO block */ +#define CONFIG_OMAP_GPIO +#define CONFIG_CMD_GPIO + +/* + * GPMC NAND block. We support 1 device and the physical address to + * access CS0 at is 0x8000000. + */ +#ifdef CONFIG_NAND +#define CONFIG_NAND_OMAP_GPMC +#define CONFIG_SYS_NAND_BASE 0x8000000 +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_CMD_NAND +#endif + +/* + * The following are general good-enough settings for U-Boot. We set a + * large malloc pool as we generally have a lot of DDR, and we opt for + * function over binary size in the main portion of U-Boot as this is + * generally easily constrained later if needed. We enable the config + * options that give us information in the environment about what board + * we are on so we do not need to rely on the command prompt. We set a + * console baudrate of 115200 and use the default baud rate table. + */ +#define CONFIG_SYS_MALLOC_LEN (1024 << 10) +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT "U-Boot# " +#define CONFIG_SYS_CONSOLE_INFO_QUIET +#define CONFIG_BAUDRATE 115200 +#define CONFIG_ENV_VARS_UBOOT_CONFIG /* Strongly encouraged */ +#define CONFIG_ENV_OVERWRITE /* Overwrite ethaddr / serial# */ + +/* As stated above, the following choices are optional. */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_AUTO_COMPLETE +#define CONFIG_CMDLINE_EDITING +#define CONFIG_VERSION_VARIABLE + +/* We set the max number of command args high to avoid HUSH bugs. */ +#define CONFIG_SYS_MAXARGS 64 + +/* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 512 +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ + + sizeof(CONFIG_SYS_PROMPT) + 16) +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +/* + * When we have SPI, NOR or NAND flash we expect to be making use of + * mtdparts, both for ease of use in U-Boot and for passing information + * on to the Linux kernel. + */ +#if defined(CONFIG_SPI_BOOT) || defined(CONFIG_NOR) || defined(CONFIG_NAND) +#define CONFIG_MTD_DEVICE /* Required for mtdparts */ +#define CONFIG_CMD_MTDPARTS +#endif + +/* + * For commands to use, we take the default list and add a few other + * useful commands. Note that we must have set CONFIG_SYS_NO_FLASH + * prior to this include, in order to skip a few commands. When we do + * have flash, if we expect these commands they must be enabled in that + * config. If desired, a specific list of desired commands can be used + * instead. + */ +#include <config_cmd_default.h> +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_BOOTZ + +/* + * Common filesystems support. When we have removable storage we + * enabled a number of useful commands and support. + */ +#if defined(CONFIG_MMC) || defined(CONFIG_USB_STORAGE) +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_FAT +#define CONFIG_FAT_WRITE +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_FS_GENERIC +#endif + +/* + * Our platforms make use of SPL to initalize the hardware (primarily + * memory) enough for full U-Boot to be loaded. We also support Falcon + * Mode so that the Linux kernel can be booted directly from SPL + * instead, if desired. We make use of the general SPL framework found + * under common/spl/. Given our generally common memory map, we set a + * number of related defaults and sizes here. + */ +#ifndef CONFIG_NOR_BOOT +#define CONFIG_SPL +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_OS_BOOT + +/* + * Place the image at the start of the ROM defined image space. + * We limit our size to the ROM-defined downloaded image area, and use the + * rest of the space for stack. We load U-Boot itself into memory at + * 0x80800000 for legacy reasons (to not conflict with older SPLs). We + * have our BSS be placed 1MiB after this, to allow for the default + * Linux kernel address of 0x80008000 to work, in the Falcon Mode case. + * We have the SPL malloc pool at the end of the BSS area. + */ +#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR +#define CONFIG_SYS_TEXT_BASE 0x80800000 +#define CONFIG_SPL_BSS_START_ADDR 0x80a00000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ +#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ + CONFIG_SPL_BSS_MAX_SIZE) +#define CONFIG_SYS_SPL_MALLOC_SIZE CONFIG_SYS_MALLOC_LEN + +/* RAW SD card / eMMC locations. */ +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ + +/* FAT sd card locations. */ +#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 +#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" + +#ifdef CONFIG_SPL_OS_BOOT +#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + 0x100) + +/* FAT */ +#define CONFIG_SPL_FAT_LOAD_KERNEL_NAME "uImage" +#define CONFIG_SPL_FAT_LOAD_ARGS_NAME "args" + +/* RAW SD card / eMMC */ +#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x900 /* address 0x120000 */ +#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x80 /* address 0x10000 */ +#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0x80 /* 64KiB */ + +/* NAND */ +#ifdef CONFIG_NAND +#define CONFIG_CMD_SPL_NAND_OFS 0x240000 /* end of u-boot */ +#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000 +#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000 +#endif + +/* spl export command */ +#define CONFIG_CMD_SPL +#endif + +#ifdef CONFIG_MMC +#define CONFIG_SPL_LIBDISK_SUPPORT +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SPL_FAT_SUPPORT +#endif + +/* General parts of the framework, required. */ +#define CONFIG_SPL_I2C_SUPPORT +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_GPIO_SUPPORT +#define CONFIG_SPL_BOARD_INIT + +#ifdef CONFIG_NAND +#define CONFIG_SPL_NAND_AM33XX_BCH /* OMAP4 and later ELM support */ +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_NAND_BASE +#define CONFIG_SPL_NAND_DRIVERS +#define CONFIG_SPL_NAND_ECC +#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 +#endif +#endif /* !CONFIG_NOR_BOOT */ + +#endif /* __CONFIG_TI_ARMV7_COMMON_H__ */ diff --git a/include/configs/trats.h b/include/configs/trats.h index 9b6aac9..24ea06b 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -263,6 +263,9 @@ #define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ #define CONFIG_SYS_I2C_SOFT_SPEED 50000 #define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE +#define I2C_SOFT_DECLARATIONS2 +#define CONFIG_SYS_I2C_SOFT_SPEED_2 50000 +#define CONFIG_SYS_I2C_SOFT_SLAVE_2 0x7F #define CONFIG_SOFT_I2C_READ_REPEATED_START #define CONFIG_SYS_I2C_INIT_BOARD #define CONFIG_I2C_MULTI_BUS diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h index 4e2cb65..a9b2714 100644 --- a/include/configs/tricorder.h +++ b/include/configs/tricorder.h @@ -19,6 +19,7 @@ /* High Level Configuration Options */ #define CONFIG_OMAP /* in a TI OMAP core */ #define CONFIG_OMAP34XX /* which is a 34XX */ +#define CONFIG_OMAP_COMMON #define CONFIG_MACH_TYPE MACH_TYPE_TRICORDER /* diff --git a/include/configs/zynq.h b/include/configs/zynq.h index 79fa5bb..b9f381f 100644 --- a/include/configs/zynq.h +++ b/include/configs/zynq.h @@ -72,6 +72,15 @@ # define CONFIG_CPU_V6 /* Required by CONFIG_ARM_DCC */ #endif +#define CONFIG_ZYNQ_SPI + +/* SPI */ +#ifdef CONFIG_ZYNQ_SPI +# define CONFIG_SPI_FLASH +# define CONFIG_SPI_FLASH_SST +# define CONFIG_CMD_SF +#endif + /* Enable the PL to be downloaded */ #define CONFIG_FPGA #define CONFIG_FPGA_XILINX diff --git a/include/dfu.h b/include/dfu.h index 6c7d227..47b9055 100644 --- a/include/dfu.h +++ b/include/dfu.h @@ -47,6 +47,8 @@ struct nand_internal_data { unsigned int dev; unsigned int part; + /* for nand/ubi use */ + unsigned int ubi; }; static inline unsigned int get_mmc_blk_size(int dev) @@ -109,6 +111,8 @@ const char *dfu_get_dev_type(enum dfu_device_type t); const char *dfu_get_layout(enum dfu_layout l); struct dfu_entity *dfu_get_entity(int alt); char *dfu_extract_token(char** e, int *n); +void dfu_trigger_reset(void); +bool dfu_reset(void); int dfu_read(struct dfu_entity *de, void *buf, int size, int blk_seq_num); int dfu_write(struct dfu_entity *de, void *buf, int size, int blk_seq_num); diff --git a/include/e500.h b/include/e500.h index 0ff8e89..0c24326 100644 --- a/include/e500.h +++ b/include/e500.h @@ -10,19 +10,19 @@ typedef struct { - unsigned long freqProcessor[CONFIG_MAX_CPUS]; - unsigned long freqSystemBus; - unsigned long freqDDRBus; - unsigned long freqLocalBus; - unsigned long freqQE; + unsigned long freq_processor[CONFIG_MAX_CPUS]; + unsigned long freq_systembus; + unsigned long freq_ddrbus; + unsigned long freq_localbus; + unsigned long freq_qe; #ifdef CONFIG_SYS_DPAA_FMAN - unsigned long freqFMan[CONFIG_SYS_NUM_FMAN]; + unsigned long freq_fman[CONFIG_SYS_NUM_FMAN]; #endif #ifdef CONFIG_SYS_DPAA_QBMAN - unsigned long freqQMAN; + unsigned long freq_qman; #endif #ifdef CONFIG_SYS_DPAA_PME - unsigned long freqPME; + unsigned long freq_pme; #endif } MPC85xx_SYS_INFO; diff --git a/include/edid.h b/include/edid.h index f153091..480a773 100644 --- a/include/edid.h +++ b/include/edid.h @@ -54,7 +54,7 @@ struct edid_detailed_timing { (_x).vertical_blanking) unsigned char hsync_offset; unsigned char hsync_pulse_width; - unsigned char sync_offset_pulse_width; + unsigned char vsync_offset_pulse_width; unsigned char hsync_vsync_offset_pulse_width_hi; #define EDID_DETAILED_TIMING_HSYNC_OFFSET(_x) \ ((GET_BITS((_x).hsync_vsync_offset_pulse_width_hi, 7, 6) << 8) + \ diff --git a/include/elf.h b/include/elf.h index 29f276d..b8ecc41 100644 --- a/include/elf.h +++ b/include/elf.h @@ -2,27 +2,7 @@ * Copyright (c) 1995, 1996, 2001, 2002 * Erik Theisen. All rights reserved. * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * SPDX-License-Identifier: BSD-3-Clause */ /* diff --git a/include/fsl_esdhc.h b/include/fsl_esdhc.h index 2c97398..89bcbd1 100644 --- a/include/fsl_esdhc.h +++ b/include/fsl_esdhc.h @@ -182,5 +182,6 @@ void fdt_fixup_esdhc(void *blob, bd_t *bd); static inline int fsl_esdhc_mmc_init(bd_t *bis) { return -ENOSYS; } static inline void fdt_fixup_esdhc(void *blob, bd_t *bd) {} #endif /* CONFIG_FSL_ESDHC */ +void __noreturn mmc_boot(void); #endif /* __FSL_ESDHC_H__ */ diff --git a/include/fsl_usb.h b/include/fsl_usb.h new file mode 100644 index 0000000..915774c --- /dev/null +++ b/include/fsl_usb.h @@ -0,0 +1,64 @@ +/* + * Freescale USB Controller + * + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _ASM_FSL_USB_H_ +#define _ASM_FSL_USB_H_ + +#ifdef CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE +struct ccsr_usb_port_ctrl { + u32 ctrl; + u32 drvvbuscfg; + u32 pwrfltcfg; + u32 sts; + u8 res_14[0xc]; + u32 bistcfg; + u32 biststs; + u32 abistcfg; + u32 abiststs; + u8 res_30[0x10]; + u32 xcvrprg; + u32 anaprg; + u32 anadrv; + u32 anasts; +}; + +struct ccsr_usb_phy { + u32 id; + struct ccsr_usb_port_ctrl port1; + u8 res_50[0xc]; + u32 tvr; + u32 pllprg[4]; + u8 res_70[0x4]; + u32 anaccfg; + u32 dbg; + u8 res_7c[0x4]; + struct ccsr_usb_port_ctrl port2; + u8 res_dc[0x334]; +}; + +#define CONFIG_SYS_FSL_USB_CTRL_PHY_EN (1 << 0) +#define CONFIG_SYS_FSL_USB_DRVVBUS_CR_EN (1 << 1) +#define CONFIG_SYS_FSL_USB_PWRFLT_CR_EN (1 << 1) +#define CONFIG_SYS_FSL_USB_PLLPRG1_PHY_DIV (1 << 0) +#define CONFIG_SYS_FSL_USB_PLLPRG2_PHY2_CLK_EN (1 << 0) +#define CONFIG_SYS_FSL_USB_PLLPRG2_PHY1_CLK_EN (1 << 1) +#define CONFIG_SYS_FSL_USB_PLLPRG2_FRAC_LPF_EN (1 << 13) +#define CONFIG_SYS_FSL_USB_PLLPRG2_REF_DIV (1 << 4) +#define CONFIG_SYS_FSL_USB_PLLPRG2_MFI (5 << 16) +#define CONFIG_SYS_FSL_USB_PLLPRG2_PLL_EN (1 << 21) +#define CONFIG_SYS_FSL_USB_SYS_CLK_VALID (1 << 0) +#else +struct ccsr_usb_phy { + u8 res0[0x18]; + u32 usb_enable_override; + u8 res[0xe4]; +}; +#define CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE 1 +#endif + +#endif /*_ASM_FSL_USB_H_ */ diff --git a/include/gdsys_fpga.h b/include/gdsys_fpga.h index 0a8268c..f50e0e2 100644 --- a/include/gdsys_fpga.h +++ b/include/gdsys_fpga.h @@ -19,6 +19,23 @@ enum { int get_fpga_state(unsigned dev); void print_fpga_state(unsigned dev); +int fpga_set_reg(u32 fpga, u16 *reg, off_t regoff, u16 data); +int fpga_get_reg(u32 fpga, u16 *reg, off_t regoff, u16 *data); + +extern struct ihs_fpga *fpga_ptr[]; + +#define FPGA_SET_REG(ix, fld, val) \ + fpga_set_reg((ix), \ + &fpga_ptr[ix]->fld, \ + offsetof(struct ihs_fpga, fld), \ + val) + +#define FPGA_GET_REG(ix, fld, val) \ + fpga_get_reg((ix), \ + &fpga_ptr[ix]->fld, \ + offsetof(struct ihs_fpga, fld), \ + val) + struct ihs_gpio { u16 read; u16 clear; @@ -67,6 +84,19 @@ struct ihs_fpga { #endif #ifdef CONFIG_IO64 + +struct ihs_fpga_channel { + u16 status_int; + u16 config_int; + u16 switch_connect_config; + u16 tx_destination; +}; + +struct ihs_fpga_hicb { + u16 status_int; + u16 config_int; +}; + struct ihs_fpga { u16 reflection_low; /* 0x0000 */ u16 versions; /* 0x0002 */ @@ -75,12 +105,9 @@ struct ihs_fpga { u16 reserved_0[5]; /* 0x0008 */ u16 quad_serdes_reset; /* 0x0012 */ u16 reserved_1[502]; /* 0x0014 */ - u16 ch0_status_int; /* 0x0400 */ - u16 ch0_config_int; /* 0x0402 */ - u16 reserved_2[126]; /* 0x0404 */ - u16 ch0_hicb_status_int;/* 0x0500 */ - u16 ch0_hicb_config_int;/* 0x0502 */ - u16 reserved_3[7549]; /* 0x0504 */ + struct ihs_fpga_channel ch[32]; /* 0x0400 */ + struct ihs_fpga_channel hicb_ch[32]; /* 0x0500 */ + u16 reserved_2[7487]; /* 0x0580 */ u16 reflection_high; /* 0x3ffe */ }; #endif @@ -96,11 +123,22 @@ struct ihs_fpga { u16 mpc3w_control; /* 0x001a */ u16 reserved_1[19]; /* 0x001c */ u16 videocontrol; /* 0x0042 */ - u16 reserved_2[93]; /* 0x0044 */ + u16 reserved_2[14]; /* 0x0044 */ + u16 mc_int; /* 0x0060 */ + u16 mc_int_en; /* 0x0062 */ + u16 mc_status; /* 0x0064 */ + u16 mc_control; /* 0x0066 */ + u16 mc_tx_data; /* 0x0068 */ + u16 mc_tx_address; /* 0x006a */ + u16 mc_tx_cmd; /* 0x006c */ + u16 mc_res; /* 0x006e */ + u16 mc_rx_cmd_status; /* 0x0070 */ + u16 mc_rx_data; /* 0x0072 */ + u16 reserved_3[69]; /* 0x0074 */ u16 reflection_high; /* 0x00fe */ struct ihs_osd osd; /* 0x0100 */ - u16 reserved_3[889]; /* 0x010e */ - u16 videomem; /* 0x0800 */ + u16 reserved_4[889]; /* 0x010e */ + u16 videomem[31736]; /* 0x0800 */ }; #endif @@ -121,7 +159,7 @@ struct ihs_fpga { u16 reserved_4[176]; /* 0x00a0 */ struct ihs_osd osd; /* 0x0200 */ u16 reserved_5[761]; /* 0x020e */ - u16 videomem; /* 0x0800 */ + u16 videomem[31736]; /* 0x0800 */ }; #endif diff --git a/include/i2c.h b/include/i2c.h index d8674ef..8fd17d1 100644 --- a/include/i2c.h +++ b/include/i2c.h @@ -390,7 +390,7 @@ unsigned int i2c_get_bus_speed(void); # if !defined(CONFIG_SYS_MAX_I2C_BUS) # define CONFIG_SYS_MAX_I2C_BUS 2 # endif -# define I2C_MULTI_BUS 0 +# define I2C_MULTI_BUS 1 #else # define CONFIG_SYS_MAX_I2C_BUS 1 # define I2C_MULTI_BUS 0 diff --git a/include/linux/compat.h b/include/linux/compat.h index e1338bf..3fdfb39 100644 --- a/include/linux/compat.h +++ b/include/linux/compat.h @@ -3,6 +3,14 @@ #define ndelay(x) udelay(1) +#define dev_dbg(dev, fmt, args...) \ + debug(fmt, ##args) +#define dev_vdbg(dev, fmt, args...) \ + debug(fmt, ##args) +#define dev_info(dev, fmt, args...) \ + printf(fmt, ##args) +#define dev_err(dev, fmt, args...) \ + printf(fmt, ##args) #define printk printf #define KERN_EMERG diff --git a/include/miiphy.h b/include/miiphy.h index ca5040e..657b496 100644 --- a/include/miiphy.h +++ b/include/miiphy.h @@ -1,27 +1,8 @@ -/*----------------------------------------------------------------------------+ -| This source code is dual-licensed. You may use it under the terms of the -| GNU General Public License version 2, or under the license below. -| -| This source code has been made available to you by IBM on an AS-IS -| basis. Anyone receiving this source is licensed under IBM -| copyrights to use it in any way he or she deems fit, including -| copying it, modifying it, compiling it, and redistributing it either -| with or without modifications. No license under IBM patents or -| patent applications is to be implied by the copyright license. -| -| Any user of this software should understand that IBM cannot provide -| technical support for this software and will not be responsible for -| any consequences resulting from the use of this software. -| -| Any person who transfers this source code or any derivative work -| must include the IBM copyright notice, this paragraph, and the -| preceding two paragraphs in the transferred software. -| -| COPYRIGHT I B M CORPORATION 1999 -| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M -| -| Additions (C) Copyright 2009 Industrie Dial Face S.p.A. -+----------------------------------------------------------------------------*/ +/* + * SPDX-License-Identifier: GPL-2.0 ibm-pibs + * + * Additions (C) Copyright 2009 Industrie Dial Face S.p.A. + */ /*----------------------------------------------------------------------------+ | | File Name: miiphy.h diff --git a/include/mpc86xx.h b/include/mpc86xx.h index 31e83f2..9fe4748 100644 --- a/include/mpc86xx.h +++ b/include/mpc86xx.h @@ -41,9 +41,9 @@ #ifndef __ASSEMBLY__ typedef struct { - unsigned long freqProcessor; - unsigned long freqSystemBus; - unsigned long freqLocalBus; + unsigned long freq_processor; + unsigned long freq_systembus; + unsigned long freq_localbus; } MPC86xx_SYS_INFO; #define l1icache_enable icache_enable diff --git a/include/mtd/cfi_flash.h b/include/mtd/cfi_flash.h index 5198ecd..048b477 100644 --- a/include/mtd/cfi_flash.h +++ b/include/mtd/cfi_flash.h @@ -167,5 +167,19 @@ extern int cfi_flash_num_flash_banks; void flash_write_cmd(flash_info_t * info, flash_sect_t sect, uint offset, u32 cmd); +phys_addr_t cfi_flash_bank_addr(int i); +unsigned long cfi_flash_bank_size(int i); +void flash_cmd_reset(flash_info_t *info); + +#ifdef CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS +void flash_write8(u8 value, void *addr); +void flash_write16(u16 value, void *addr); +void flash_write32(u32 value, void *addr); +void flash_write64(u64 value, void *addr); +u8 flash_read8(void *addr); +u16 flash_read16(void *addr); +u32 flash_read32(void *addr); +u64 flash_read64(void *addr); +#endif #endif /* __CFI_FLASH_H__ */ diff --git a/include/net.h b/include/net.h index 7673470..5aedc17 100644 --- a/include/net.h +++ b/include/net.h @@ -357,7 +357,7 @@ struct icmp_hdr { } echo; ulong gateway; struct { - ushort __unused; + ushort unused; ushort mtu; } frag; uchar data[0]; diff --git a/include/pci.h b/include/pci.h index 01002a4..911ba89 100644 --- a/include/pci.h +++ b/include/pci.h @@ -410,13 +410,6 @@ #define PCI_MAX_PCI_DEVICES 32 #define PCI_MAX_PCI_FUNCTIONS 8 -#define PCI_DCR 0x54 /* PCIe Device Control Register */ -#define PCI_DSR 0x56 /* PCIe Device Status Register */ -#define PCI_LSR 0x5e /* PCIe Link Status Register */ -#define PCI_LCR 0x5c /* PCIe Link Control Register */ -#define PCI_LTSSM 0x404 /* PCIe Link Training, Status State Machine */ -#define PCI_LTSSM_L0 0x16 /* L0 state */ - /* Include the ID list */ #include <pci_ids.h> diff --git a/include/serial.h b/include/serial.h index f6bb2b9..d232d47 100644 --- a/include/serial.h +++ b/include/serial.h @@ -26,7 +26,7 @@ extern struct serial_device serial_smc_device; extern struct serial_device serial_scc_device; extern struct serial_device *default_serial_console(void); -#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \ +#if defined(CONFIG_405GP) || \ defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \ defined(CONFIG_405EX) || defined(CONFIG_440) || \ defined(CONFIG_MB86R0x) || defined(CONFIG_MPC5xxx) || \ diff --git a/include/stdio_dev.h b/include/stdio_dev.h index d0b5593..e6dc12a 100644 --- a/include/stdio_dev.h +++ b/include/stdio_dev.h @@ -83,9 +83,6 @@ struct list_head* stdio_get_list(void); struct stdio_dev* stdio_get_by_name(const char* name); struct stdio_dev* stdio_clone(struct stdio_dev *dev); -#ifdef CONFIG_ARM_DCC -int drv_arm_dcc_init(void); -#endif #ifdef CONFIG_LCD int drv_lcd_init (void); #endif diff --git a/include/usb/mv_udc.h b/include/usb/mv_udc.h index c7696e6..c71516c 100644 --- a/include/usb/mv_udc.h +++ b/include/usb/mv_udc.h @@ -14,39 +14,19 @@ #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> -/* Endpoint 0 states */ -#define EP0_IDLE 0 -#define EP0_IN_DATA 1 -#define EP0_OUT_DATA 2 -#define EP0_XFER_COMPLETE 3 +#include "../../drivers/usb/host/ehci.h" +#define NUM_ENDPOINTS 6 /* Endpoint parameters */ #define MAX_ENDPOINTS 4 -#define EP_MAX_PACKET_SIZE 0x200 +#define EP_MAX_PACKET_SIZE 0x200 #define EP0_MAX_PACKET_SIZE 64 -#define UDC_OUT_ENDPOINT 0x02 -#define UDC_OUT_PACKET_SIZE EP_MAX_PACKET_SIZE -#define UDC_IN_ENDPOINT 0x01 -#define UDC_IN_PACKET_SIZE EP_MAX_PACKET_SIZE -#define UDC_INT_ENDPOINT 0x05 -#define UDC_INT_PACKET_SIZE EP_MAX_PACKET_SIZE -#define UDC_BULK_PACKET_SIZE EP_MAX_PACKET_SIZE - -#define NUM_ENDPOINTS 6 -#define REQ_COUNT 12 -struct mv_ep { - struct usb_ep ep; - struct usb_request req; - struct list_head queue; - const struct usb_endpoint_descriptor *desc; -}; struct mv_udc { - u32 pad0[80]; #define MICRO_8FRAME 0x8 -#define USBCMD_ITC(x) (((x > 0xff) ? 0xff : x) << 16) +#define USBCMD_ITC(x) ((((x) > 0xff) ? 0xff : x) << 16) #define USBCMD_FS2 (1 << 15) #define USBCMD_RST (1 << 1) #define USBCMD_RUN (1) @@ -62,37 +42,52 @@ struct mv_udc { u32 epinitaddr; /* 0x158 */ u32 pad2[10]; #define PTS_ENABLE 2 -#define PTS(x) ((x & 0x3) << 30) +#define PTS(x) (((x) & 0x3) << 30) #define PFSC (1 << 24) u32 portsc; /* 0x184 */ u32 pad3[8]; #define USBMODE_DEVICE 2 u32 usbmode; /* 0x1a8 */ u32 epstat; /* 0x1ac */ -#define EPT_TX(x) (1 << ((x & 0xffff) + 16)) -#define EPT_RX(x) (1 << (x & 0xffff)) +#define EPT_TX(x) (1 << (((x) & 0xffff) + 16)) +#define EPT_RX(x) (1 << ((x) & 0xffff)) u32 epprime; /* 0x1b0 */ u32 epflush; /* 0x1b4 */ u32 pad4; u32 epcomp; /* 0x1bc */ -#define CTRL_TXE (1 << 23) -#define CTRL_TXR (1 << 22) -#define CTRL_RXE (1 << 7) -#define CTRL_RXR (1 << 6) -#define CTRL_TXT_BULK (2 << 18) -#define CTRL_RXT_BULK (2 << 2) +#define CTRL_TXE (1 << 23) +#define CTRL_TXR (1 << 22) +#define CTRL_RXE (1 << 7) +#define CTRL_RXR (1 << 6) +#define CTRL_TXT_BULK (2 << 18) +#define CTRL_RXT_BULK (2 << 2) u32 epctrl[16]; /* 0x1c0 */ }; +struct mv_ep { + struct usb_ep ep; + struct list_head queue; + const struct usb_endpoint_descriptor *desc; + + struct usb_request req; + uint8_t *b_buf; + uint32_t b_len; + uint8_t b_fast[64] __aligned(ARCH_DMA_MINALIGN); +}; + struct mv_drv { struct usb_gadget gadget; - struct usb_gadget_driver *driver; - struct mv_udc *udc; + struct usb_gadget_driver *driver; + struct ehci_ctrl *ctrl; + struct ept_queue_head *epts; + struct ept_queue_item *items[2 * NUM_ENDPOINTS]; + uint8_t *items_mem; + struct mv_ep ep[NUM_ENDPOINTS]; }; struct ept_queue_head { unsigned config; - unsigned current; /* read-only */ + unsigned current; /* read-only */ unsigned next; unsigned info; @@ -111,9 +106,9 @@ struct ept_queue_head { unsigned reserved_4; }; -#define CONFIG_MAX_PKT(n) ((n) << 16) -#define CONFIG_ZLT (1 << 29) /* stop on zero-len xfer */ -#define CONFIG_IOS (1 << 15) /* IRQ on setup */ +#define CONFIG_MAX_PKT(n) ((n) << 16) +#define CONFIG_ZLT (1 << 29) /* stop on zero-len xfer */ +#define CONFIG_IOS (1 << 15) /* IRQ on setup */ struct ept_queue_item { unsigned next; @@ -127,12 +122,11 @@ struct ept_queue_item { }; #define TERMINATE 1 -#define INFO_BYTES(n) ((n) << 16) -#define INFO_IOC (1 << 15) -#define INFO_ACTIVE (1 << 7) -#define INFO_HALTED (1 << 6) -#define INFO_BUFFER_ERROR (1 << 5) -#define INFO_TX_ERROR (1 << 3) - -extern int usb_lowlevel_init(int index, void **controller); +#define INFO_BYTES(n) ((n) << 16) +#define INFO_IOC (1 << 15) +#define INFO_ACTIVE (1 << 7) +#define INFO_HALTED (1 << 6) +#define INFO_BUFFER_ERROR (1 << 5) +#define INFO_TX_ERROR (1 << 3) + #endif /* __MV_UDC_H__ */ diff --git a/include/video.h b/include/video.h index f7e27f8..0ff857b 100644 --- a/include/video.h +++ b/include/video.h @@ -63,4 +63,8 @@ void video_position_cursor(unsigned col, unsigned row); /* Clear the display */ void video_clear(void); +#if defined(CONFIG_FORMIKE) +int kwh043st20_f01_spi_startup(unsigned int bus, unsigned int cs, + unsigned int max_hz, unsigned int spi_mode); +#endif #endif diff --git a/include/video_font.h b/include/video_font.h index 7ef9519..96b9edb 100644 --- a/include/video_font.h +++ b/include/video_font.h @@ -8,9 +8,10 @@ #ifndef _VIDEO_FONT_ #define _VIDEO_FONT_ -#define VIDEO_FONT_CHARS 256 -#define VIDEO_FONT_WIDTH 8 -#define VIDEO_FONT_HEIGHT 16 -#define VIDEO_FONT_SIZE (VIDEO_FONT_CHARS * VIDEO_FONT_HEIGHT) +#ifdef CONFIG_VIDEO_FONT_4X6 +#include <video_font_4x6.h> +#else +#include <video_font_data.h> +#endif #endif /* _VIDEO_FONT_ */ diff --git a/include/video_font_4x6.h b/include/video_font_4x6.h new file mode 100644 index 0000000..d1778d5 --- /dev/null +++ b/include/video_font_4x6.h @@ -0,0 +1,2154 @@ + +/* Hand composed "Minuscule" 4x6 font, with binary data generated using + * Perl stub. + * + * Use 'perl -x mini_4x6.c < mini_4x6.c > new_version.c' to regenerate + * binary data. + * + * Created by Kenneth Albanowski. + * No rights reserved, released to the public domain. + * + * Version 1.0 + */ + +/* + +#!/usr/bin/perl -pn + +s{((0x)?[0-9a-fA-F]+)(.*\[([\*\ ]{4})\])}{ + + ($num,$pat,$bits) = ($1,$3,$4); + + $bits =~ s/([^\s0])|(.)/ defined($1) + 0 /ge; + + $num = ord(pack("B8", $bits)); + $num |= $num >> 4; + $num = sprintf("0x%.2x", $num); + + #print "$num,$pat,$bits\n"; + + $num . $pat; +}ge; + +__END__; +*/ + +/* Note: binary data consists of one byte for each row of each character top + to bottom, character 0 to character 255, six bytes per character. Each + byte contains the same four character bits in both nybbles. + MSBit to LSBit = left to right. + */ + +#ifndef _VIDEO_FONT_DATA_ +#define _VIDEO_FONT_DATA_ + +#define VIDEO_FONT_CHARS 256 +#define VIDEO_FONT_WIDTH 4 +#define VIDEO_FONT_HEIGHT 6 +#define VIDEO_FONT_SIZE (VIDEO_FONT_CHARS * VIDEO_FONT_HEIGHT) + +static unsigned char video_fontdata[VIDEO_FONT_SIZE] = { + + /*{*/ + /* Char 0: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 1: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 2: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 3: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 4: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 5: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 6: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 7: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 8: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 9: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 10: '' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 11: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 12: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 13: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 14: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 15: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 16: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 17: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 18: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 19: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 20: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 21: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 22: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 23: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 24: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 25: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 26: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 27: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 28: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 29: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 30: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 31: ' ' */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 32: ' ' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 33: '!' */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 34: '"' */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 35: '#' */ + 0xaa, /*= [* * ] */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 36: '$' */ + 0x44, /*= [ * ] */ + 0x66, /*= [ ** ] */ + 0xee, /*= [*** ] */ + 0xcc, /*= [** ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 37: '%' */ + 0xaa, /*= [* * ] */ + 0x22, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x88, /*= [* ] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 38: '&' */ + 0x66, /*= [ ** ] */ + 0x99, /*= [* *] */ + 0x66, /*= [ ** ] */ + 0xaa, /*= [* * ] */ + 0xdd, /*= [** *] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 39: ''' */ + 0x22, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 40: '(' */ + 0x22, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 41: ')' */ + 0x44, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 42: '*' */ + 0x00, /*= [ ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 43: '+' */ + 0x00, /*= [ ] */ + 0x44, /*= [ * ] */ + 0xee, /*= [*** ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 44: ',' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x44, /*= [ * ] */ + 0x88, /*= [* ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 45: '-' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 46: '.' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 47: '/' */ + 0x00, /*= [ ] */ + 0x22, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x88, /*= [* ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 48: '0' */ + 0x44, /*= [ * ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 49: '1' */ + 0x44, /*= [ * ] */ + 0xcc, /*= [** ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 50: '2' */ + 0xcc, /*= [** ] */ + 0x22, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x88, /*= [* ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ + /* Char 51: '3' */ + 0xee, /*= [*** ] */ + 0x22, /*= [ * ] */ + 0x66, /*= [ ** ] */ + 0x22, /*= [ * ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 52: '4' */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0x22, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 53: '5' */ + 0xee, /*= [*** ] */ + 0x88, /*= [* ] */ + 0xee, /*= [*** ] */ + 0x22, /*= [ * ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 54: '6' */ + 0xee, /*= [*** ] */ + 0x88, /*= [* ] */ + 0xee, /*= [*** ] */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 55: '7' */ + 0xee, /*= [*** ] */ + 0x22, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 56: '8' */ + 0xee, /*= [*** ] */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 57: '9' */ + 0xee, /*= [*** ] */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0x22, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 58: ':' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 59: ';' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + 0x44, /*= [ * ] */ + 0x88, /*= [* ] */ + /*}*/ + /*{*/ /* Char 60: '<' */ + 0x22, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x88, /*= [* ] */ + 0x44, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 61: '=' */ + 0x00, /*= [ ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 62: '>' */ + 0x88, /*= [* ] */ + 0x44, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x88, /*= [* ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 63: '?' */ + 0xee, /*= [*** ] */ + 0x22, /*= [ * ] */ + 0x66, /*= [ ** ] */ + 0x00, /*= [ ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 64: '@' */ + 0x44, /*= [ * ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x88, /*= [* ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 65: 'A' */ + 0x44, /*= [ * ] */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 66: 'B' */ + 0xcc, /*= [** ] */ + 0xaa, /*= [* * ] */ + 0xcc, /*= [** ] */ + 0xaa, /*= [* * ] */ + 0xcc, /*= [** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 67: 'C' */ + 0x66, /*= [ ** ] */ + 0x88, /*= [* ] */ + 0x88, /*= [* ] */ + 0x88, /*= [* ] */ + 0x66, /*= [ ** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 68: 'D' */ + 0xcc, /*= [** ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0xcc, /*= [** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 69: 'E' */ + 0xee, /*= [*** ] */ + 0x88, /*= [* ] */ + 0xee, /*= [*** ] */ + 0x88, /*= [* ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 70: 'F' */ + 0xee, /*= [*** ] */ + 0x88, /*= [* ] */ + 0xee, /*= [*** ] */ + 0x88, /*= [* ] */ + 0x88, /*= [* ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 71: 'G' */ + 0x66, /*= [ ** ] */ + 0x88, /*= [* ] */ + 0xee, /*= [*** ] */ + 0xaa, /*= [* * ] */ + 0x66, /*= [ ** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 72: 'H' */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 73: 'I' */ + 0xee, /*= [*** ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 74: 'J' */ + 0x22, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0xaa, /*= [* * ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 75: 'K' */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0xcc, /*= [** ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 76: 'L' */ + 0x88, /*= [* ] */ + 0x88, /*= [* ] */ + 0x88, /*= [* ] */ + 0x88, /*= [* ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 77: 'M' */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 78: 'N' */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 79: 'O' */ + 0x44, /*= [ * ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 80: 'P' */ + 0xcc, /*= [** ] */ + 0xaa, /*= [* * ] */ + 0xcc, /*= [** ] */ + 0x88, /*= [* ] */ + 0x88, /*= [* ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 81: 'Q' */ + 0x44, /*= [ * ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0x66, /*= [ ** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 82: 'R' */ + 0xcc, /*= [** ] */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0xcc, /*= [** ] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 83: 'S' */ + 0x66, /*= [ ** ] */ + 0x88, /*= [* ] */ + 0x44, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0xcc, /*= [** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 84: 'T' */ + 0xee, /*= [*** ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 85: 'U' */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0x66, /*= [ ** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 86: 'V' */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 87: 'W' */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 88: 'X' */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0x44, /*= [ * ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 89: 'Y' */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 90: 'Z' */ + 0xee, /*= [*** ] */ + 0x22, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x88, /*= [* ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 91: '[' */ + 0x66, /*= [ ** ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x66, /*= [ ** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 92: '\' */ + 0x00, /*= [ ] */ + 0x88, /*= [* ] */ + 0x44, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 93: ']' */ + 0x66, /*= [ ** ] */ + 0x22, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x66, /*= [ ** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 94: '^' */ + 0x44, /*= [ * ] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 95: '_' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xff, /*= [****] */ + /*}*/ + /*{*/ /* Char 96: '`' */ + 0x88, /*= [* ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 97: 'a' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x66, /*= [ ** ] */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 98: 'b' */ + 0x88, /*= [* ] */ + 0x88, /*= [* ] */ + 0xcc, /*= [** ] */ + 0xaa, /*= [* * ] */ + 0xcc, /*= [** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 99: 'c' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x66, /*= [ ** ] */ + 0x88, /*= [* ] */ + 0x66, /*= [ ** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 100: 'd' */ + 0x22, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x66, /*= [ ** ] */ + 0xaa, /*= [* * ] */ + 0x66, /*= [ ** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 101: 'e' */ + 0x00, /*= [ ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x88, /*= [* ] */ + 0x66, /*= [ ** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 102: 'f' */ + 0x22, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0xee, /*= [*** ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 103: 'g' */ + 0x00, /*= [ ] */ + 0x66, /*= [ ** ] */ + 0xaa, /*= [* * ] */ + 0x66, /*= [ ** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 104: 'h' */ + 0x88, /*= [* ] */ + 0x88, /*= [* ] */ + 0xcc, /*= [** ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 105: 'i' */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 106: 'j' */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x88, /*= [* ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 107: 'k' */ + 0x00, /*= [ ] */ + 0x88, /*= [* ] */ + 0xaa, /*= [* * ] */ + 0xcc, /*= [** ] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 108: 'l' */ + 0x00, /*= [ ] */ + 0xcc, /*= [** ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 109: 'm' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 110: 'n' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xcc, /*= [** ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 111: 'o' */ + 0x00, /*= [ ] */ + 0x44, /*= [ * ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 112: 'p' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xcc, /*= [** ] */ + 0xaa, /*= [* * ] */ + 0xcc, /*= [** ] */ + 0x88, /*= [* ] */ + /*}*/ + /*{*/ /* Char 113: 'q' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x66, /*= [ ** ] */ + 0xaa, /*= [* * ] */ + 0x66, /*= [ ** ] */ + 0x22, /*= [ * ] */ + /*}*/ + /*{*/ /* Char 114: 'r' */ + 0x00, /*= [ ] */ + 0xcc, /*= [** ] */ + 0xaa, /*= [* * ] */ + 0x88, /*= [* ] */ + 0x88, /*= [* ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 115: 's' */ + 0x00, /*= [ ] */ + 0x66, /*= [ ** ] */ + 0xcc, /*= [** ] */ + 0x22, /*= [ * ] */ + 0xcc, /*= [** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 116: 't' */ + 0x00, /*= [ ] */ + 0x44, /*= [ * ] */ + 0xee, /*= [*** ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 117: 'u' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0x66, /*= [ ** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 118: 'v' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 119: 'w' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 120: 'x' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xaa, /*= [* * ] */ + 0x44, /*= [ * ] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 121: 'y' */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0x22, /*= [ * ] */ + 0xcc, /*= [** ] */ + /*}*/ + /*{*/ /* Char 122: 'z' */ + 0x00, /*= [ ] */ + 0xee, /*= [*** ] */ + 0x66, /*= [ ** ] */ + 0xcc, /*= [** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 123: '{' */ + 0x22, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0xcc, /*= [** ] */ + 0x44, /*= [ * ] */ + 0x22, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 124: '|' */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 125: '}' */ + 0x88, /*= [* ] */ + 0x44, /*= [ * ] */ + 0x66, /*= [ ** ] */ + 0x44, /*= [ * ] */ + 0x88, /*= [* ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 126: '~' */ + 0x55, /*= [ * *] */ + 0xaa, /*= [* * ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 127: '' */ + 0x44, /*= [ * ] */ + 0xaa, /*= [* * ] */ + 0xaa, /*= [* * ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 128: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 129: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 130: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 131: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 132: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 133: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 134: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 135: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 136: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 137: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 138: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 139: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 140: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 141: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 142: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 143: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 144: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 145: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 146: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 147: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 148: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 149: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 150: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 151: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 152: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 153: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 154: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 155: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 156: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 157: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 158: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 159: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 160: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 161: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 162: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 163: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 164: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 165: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 166: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 167: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 168: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 169: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 170: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 171: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 172: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 173: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 174: */ + 0x00, /*= [ ] */ + 0x66, /*= [ ** ] */ + 0xcc, /*= [** ] */ + 0x66, /*= [ ** ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 175: */ + 0x00, /*= [ ] */ + 0xcc, /*= [** ] */ + 0x66, /*= [ ** ] */ + 0xcc, /*= [** ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 176: */ + 0x88, /*= [* ] */ + 0x22, /*= [ * ] */ + 0x88, /*= [* ] */ + 0x22, /*= [ * ] */ + 0x88, /*= [* ] */ + 0x22, /*= [ * ] */ + /*}*/ + /*{*/ /* Char 177: */ + 0xaa, /*= [* * ] */ + 0x55, /*= [ * *] */ + 0xaa, /*= [* * ] */ + 0x55, /*= [ * *] */ + 0xaa, /*= [* * ] */ + 0x55, /*= [ * *] */ + /*}*/ + /*{*/ /* Char 178: */ + 0xdd, /*= [** *] */ + 0xbb, /*= [* **] */ + 0xdd, /*= [** *] */ + 0xbb, /*= [* **] */ + 0xdd, /*= [** *] */ + 0xbb, /*= [* **] */ + /*}*/ + /*{*/ /* Char 179: */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + /*}*/ + /*{*/ /* Char 180: */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0xcc, /*= [** ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + /*}*/ + /*{*/ /* Char 181: */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0xcc, /*= [** ] */ + 0xcc, /*= [** ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + /*}*/ + /*{*/ /* Char 182: */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0xee, /*= [*** ] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + /*}*/ + /*{*/ /* Char 183: */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xee, /*= [*** ] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + /*}*/ + /*{*/ /* Char 184: */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xcc, /*= [** ] */ + 0xcc, /*= [** ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + /*}*/ + /*{*/ /* Char 185: */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + /*}*/ + /*{*/ /* Char 186: */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + /*}*/ + /*{*/ /* Char 187: */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + /*}*/ + /*{*/ /* Char 188: */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 189: */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 190: */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0xcc, /*= [** ] */ + 0xcc, /*= [** ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 191: */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xcc, /*= [** ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + /*}*/ + /*{*/ /* Char 192: */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x77, /*= [ ***] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 193: */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0xff, /*= [****] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 194: */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xff, /*= [****] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + /*}*/ + /*{*/ /* Char 195: */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x77, /*= [ ***] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + /*}*/ + /*{*/ /* Char 196: */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xff, /*= [****] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 197: */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0xff, /*= [****] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + /*}*/ + /*{*/ /* Char 198: */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x77, /*= [ ***] */ + 0x77, /*= [ ***] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + /*}*/ + /*{*/ /* Char 199: */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0x77, /*= [ ***] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + /*}*/ + /*{*/ /* Char 200: */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0x77, /*= [ ***] */ + 0x77, /*= [ ***] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 201: */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x77, /*= [ ***] */ + 0x77, /*= [ ***] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + /*}*/ + /*{*/ /* Char 202: */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 203: */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + /*}*/ + /*{*/ /* Char 204: */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0x77, /*= [ ***] */ + 0x77, /*= [ ***] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + /*}*/ + /*{*/ /* Char 205: */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 206: */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + /*}*/ + /*{*/ /* Char 207: */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 208: */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0xff, /*= [****] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 209: */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + /*}*/ + /*{*/ /* Char 210: */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xff, /*= [****] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + /*}*/ + /*{*/ /* Char 211: */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0x77, /*= [ ***] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 212: */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x77, /*= [ ***] */ + 0x77, /*= [ ***] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 213: */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x77, /*= [ ***] */ + 0x77, /*= [ ***] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + /*}*/ + /*{*/ /* Char 214: */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x77, /*= [ ***] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + /*}*/ + /*{*/ /* Char 215: */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0xff, /*= [****] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + /*}*/ + /*{*/ /* Char 216: */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + /*}*/ + /*{*/ /* Char 217: */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0xcc, /*= [** ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 218: */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x77, /*= [ ***] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + 0x44, /*= [ * ] */ + /*}*/ + /*{*/ /* Char 219: */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + /*}*/ + /*{*/ /* Char 220: */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + /*}*/ + /*{*/ /* Char 221: */ + 0xcc, /*= [** ] */ + 0xcc, /*= [** ] */ + 0xcc, /*= [** ] */ + 0xcc, /*= [** ] */ + 0xcc, /*= [** ] */ + 0xcc, /*= [** ] */ + /*}*/ + /*{*/ /* Char 222: */ + 0x33, /*= [ **] */ + 0x33, /*= [ **] */ + 0x33, /*= [ **] */ + 0x33, /*= [ **] */ + 0x33, /*= [ **] */ + 0x33, /*= [ **] */ + /*}*/ + /*{*/ /* Char 223: */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + 0xff, /*= [****] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 224: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 225: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 226: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 227: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 228: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 229: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 230: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 231: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 232: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 233: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 234: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 235: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 236: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 237: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 238: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 239: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 240: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 241: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 242: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 243: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 244: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 245: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 246: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 247: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 248: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 249: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 250: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 251: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 252: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 253: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 254: */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + 0x66, /*= [ ** ] */ + 0x66, /*= [ ** ] */ + 0x00, /*= [ ] */ + 0x00, /*= [ ] */ + /*}*/ + /*{*/ /* Char 255: */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0xee, /*= [*** ] */ + 0x00, /*= [ ] */ + /*}*/ +}; + +#endif diff --git a/include/video_font_data.h b/include/video_font_data.h index 4e544f0..346a162 100644 --- a/include/video_font_data.h +++ b/include/video_font_data.h @@ -8,7 +8,12 @@ #ifndef _VIDEO_FONT_DATA_ #define _VIDEO_FONT_DATA_ -static unsigned char video_fontdata[VIDEO_FONT_SIZE] = { +#define VIDEO_FONT_CHARS 256 +#define VIDEO_FONT_WIDTH 8 +#define VIDEO_FONT_HEIGHT 16 +#define VIDEO_FONT_SIZE (VIDEO_FONT_CHARS * VIDEO_FONT_HEIGHT) + +static unsigned char __maybe_unused video_fontdata[VIDEO_FONT_SIZE] = { /* 0 0x00 '^@' */ 0x00, /* 00000000 */ diff --git a/include/zynqpl.h b/include/zynqpl.h index f8211cd..6107cbf 100644 --- a/include/zynqpl.h +++ b/include/zynqpl.h @@ -20,12 +20,14 @@ extern int zynq_info(Xilinx_desc *desc); #define XILINX_ZYNQ_7020 0x7 #define XILINX_ZYNQ_7030 0xc #define XILINX_ZYNQ_7045 0x11 +#define XILINX_ZYNQ_7100 0x16 /* Device Image Sizes */ #define XILINX_XC7Z010_SIZE 16669920/8 #define XILINX_XC7Z020_SIZE 32364512/8 #define XILINX_XC7Z030_SIZE 47839328/8 #define XILINX_XC7Z045_SIZE 106571232/8 +#define XILINX_XC7Z100_SIZE 139330784/8 /* Descriptor Macros */ #define XILINX_XC7Z010_DESC(cookie) \ @@ -40,4 +42,7 @@ extern int zynq_info(Xilinx_desc *desc); #define XILINX_XC7Z045_DESC(cookie) \ { xilinx_zynq, devcfg, XILINX_XC7Z045_SIZE, NULL, cookie, "7z045" } +#define XILINX_XC7Z100_DESC(cookie) \ +{ xilinx_zynq, devcfg, XILINX_XC7Z100_SIZE, NULL, cookie, "7z100" } + #endif /* _ZYNQPL_H_ */ diff --git a/lib/libfdt/fdt.c b/lib/libfdt/fdt.c index 154e9a4..e146aba 100644 --- a/lib/libfdt/fdt.c +++ b/lib/libfdt/fdt.c @@ -1,52 +1,7 @@ /* * libfdt - Flat Device Tree manipulation * Copyright (C) 2006 David Gibson, IBM Corporation. - * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause */ #include "libfdt_env.h" diff --git a/lib/libfdt/fdt_empty_tree.c b/lib/libfdt/fdt_empty_tree.c index f72d13b..ac6c1fb 100644 --- a/lib/libfdt/fdt_empty_tree.c +++ b/lib/libfdt/fdt_empty_tree.c @@ -1,52 +1,7 @@ /* * libfdt - Flat Device Tree manipulation * Copyright (C) 2012 David Gibson, IBM Corporation. - * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause */ #include "libfdt_env.h" diff --git a/lib/libfdt/fdt_ro.c b/lib/libfdt/fdt_ro.c index b65f4e2..f2154e8 100644 --- a/lib/libfdt/fdt_ro.c +++ b/lib/libfdt/fdt_ro.c @@ -1,52 +1,7 @@ /* * libfdt - Flat Device Tree manipulation * Copyright (C) 2006 David Gibson, IBM Corporation. - * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause */ #include "libfdt_env.h" diff --git a/lib/libfdt/fdt_rw.c b/lib/libfdt/fdt_rw.c index aba6094..6fa4f13 100644 --- a/lib/libfdt/fdt_rw.c +++ b/lib/libfdt/fdt_rw.c @@ -1,52 +1,7 @@ /* * libfdt - Flat Device Tree manipulation * Copyright (C) 2006 David Gibson, IBM Corporation. - * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause */ #include "libfdt_env.h" diff --git a/lib/libfdt/fdt_strerror.c b/lib/libfdt/fdt_strerror.c index 9b00c3a..2f3cc24 100644 --- a/lib/libfdt/fdt_strerror.c +++ b/lib/libfdt/fdt_strerror.c @@ -1,52 +1,7 @@ /* * libfdt - Flat Device Tree manipulation * Copyright (C) 2006 David Gibson, IBM Corporation. - * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause */ #include "libfdt_env.h" diff --git a/lib/libfdt/fdt_sw.c b/lib/libfdt/fdt_sw.c index f422754..580b570 100644 --- a/lib/libfdt/fdt_sw.c +++ b/lib/libfdt/fdt_sw.c @@ -1,52 +1,7 @@ /* * libfdt - Flat Device Tree manipulation * Copyright (C) 2006 David Gibson, IBM Corporation. - * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause */ #include "libfdt_env.h" diff --git a/lib/libfdt/fdt_wip.c b/lib/libfdt/fdt_wip.c index b9e3c4a..3f2dfa5 100644 --- a/lib/libfdt/fdt_wip.c +++ b/lib/libfdt/fdt_wip.c @@ -1,52 +1,7 @@ /* * libfdt - Flat Device Tree manipulation * Copyright (C) 2006 David Gibson, IBM Corporation. - * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause */ #include "libfdt_env.h" diff --git a/lib/libfdt/libfdt_internal.h b/lib/libfdt/libfdt_internal.h index 381133b..13cbc9a 100644 --- a/lib/libfdt/libfdt_internal.h +++ b/lib/libfdt/libfdt_internal.h @@ -3,52 +3,7 @@ /* * libfdt - Flat Device Tree manipulation * Copyright (C) 2006 David Gibson, IBM Corporation. - * - * libfdt is dual licensed: you can use it either under the terms of - * the GPL, or the BSD license, at your option. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Alternatively, - * - * b) Redistribution and use in source and binary forms, with or - * without modification, are permitted provided that the following - * conditions are met: - * - * 1. Redistributions of source code must retain the above - * copyright notice, this list of conditions and the following - * disclaimer. - * 2. Redistributions in binary form must reproduce the above - * copyright notice, this list of conditions and the following - * disclaimer in the documentation and/or other materials - * provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND - * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, - * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR - * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, - * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * SPDX-License-Identifier: GPL-2.0+ BSD-2-Clause */ #include <fdt.h> @@ -207,6 +207,8 @@ static int net_check_prereq(enum proto_t protocol); static int NetTryCount; +int __maybe_unused net_busy_flag; + /**********************************************************************/ static int on_bootfile(const char *name, const char *value, enum env_op op, @@ -342,6 +344,9 @@ int NetLoop(enum proto_t protocol) eth_init_state_only(bd); restart: +#ifdef CONFIG_USB_KEYBOARD + net_busy_flag = 0; +#endif net_set_state(NETLOOP_CONTINUE); /* @@ -454,6 +459,9 @@ restart: status_led_set(STATUS_LED_RED, STATUS_LED_ON); #endif /* CONFIG_SYS_FAULT_ECHO_LINK_DOWN, ... */ #endif /* CONFIG_MII, ... */ +#ifdef CONFIG_USB_KEYBOARD + net_busy_flag = 1; +#endif /* * Main packet reception loop. Loop receiving packets until @@ -559,6 +567,9 @@ restart: } done: +#ifdef CONFIG_USB_KEYBOARD + net_busy_flag = 0; +#endif #ifdef CONFIG_CMD_TFTPPUT /* Clear out the handlers */ net_set_udp_handler(NULL); diff --git a/spl/Makefile b/spl/Makefile index 6e5299b..174d0a7 100644 --- a/spl/Makefile +++ b/spl/Makefile @@ -17,10 +17,22 @@ CONFIG_SPL_BUILD := y export CONFIG_SPL_BUILD +ifeq ($(CONFIG_TPL_BUILD),y) +export CONFIG_TPL_BUILD +SPL_BIN := u-boot-tpl +else +SPL_BIN := u-boot-spl +endif + include $(TOPDIR)/config.mk # We want the final binaries in this directory +ifeq ($(CONFIG_TPL_BUILD),y) +obj := $(OBJTREE)/tpl/ +SPLTREE := $(TPLTREE) +else obj := $(OBJTREE)/spl/ +endif HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(SRCTREE)/board/$(VENDOR)/common/Makefile),y,n) @@ -50,6 +62,9 @@ LIBS-y += arch/powerpc/cpu/mpc8xxx/lib8xxx.o endif ifeq ($(CPU),mpc85xx) LIBS-y += arch/powerpc/cpu/mpc8xxx/lib8xxx.o +ifdef CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT +LIBS-y += arch/powerpc/cpu/mpc8xxx/ddr/libddr.o +endif endif ifeq ($(CPU),mpc86xx) LIBS-y += arch/powerpc/cpu/mpc8xxx/lib8xxx.o @@ -80,10 +95,12 @@ LIBS-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/memory.o LIBS-$(CONFIG_SPL_NET_SUPPORT) += net/libnet.o LIBS-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/libnet.o LIBS-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/phy/libphy.o +LIBS-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/net/phy/libphy.o LIBS-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += drivers/usb/musb-new/libusb_musb-new.o LIBS-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/usb/gadget/libusb_gadget.o +LIBS-$(CONFIG_SPL_WATCHDOG_SUPPORT) += drivers/watchdog/libwatchdog.o -ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI814X),) +ifneq ($(CONFIG_OMAP_COMMON),) LIBS-y += $(CPUDIR)/omap-common/libomap-common.o endif @@ -157,7 +174,7 @@ $(OBJTREE)/MLO.byteswap: $(obj)u-boot-spl.bin $(OBJTREE)/SPL : $(obj)u-boot-spl.bin depend $(MAKE) -C $(SRCTREE)/arch/arm/imx-common $@ -ALL-y += $(obj)u-boot-spl.bin +ALL-y += $(obj)$(SPL_BIN).bin ifdef CONFIG_SAMSUNG ALL-y += $(obj)$(BOARD)-spl.bin @@ -171,15 +188,15 @@ $(obj)$(BOARD)-spl.bin: $(obj)u-boot-spl.bin $(obj)u-boot-spl.bin $(obj)$(BOARD)-spl.bin endif -$(obj)u-boot-spl.bin: $(obj)u-boot-spl +$(obj)$(SPL_BIN).bin: $(obj)$(SPL_BIN) $(OBJCOPY) $(OBJCFLAGS) -O binary $< $@ GEN_UBOOT = \ cd $(obj) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) $(__START) \ --start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \ - -Map u-boot-spl.map -o u-boot-spl + -Map $(SPL_BIN).map -o $(SPL_BIN) -$(obj)u-boot-spl: depend $(START) $(LIBS) $(obj)u-boot-spl.lds +$(obj)$(SPL_BIN): depend $(START) $(LIBS) $(obj)u-boot-spl.lds $(GEN_UBOOT) $(START): depend diff --git a/tools/Makefile b/tools/Makefile index f4ca1cf..0a29147 100644 --- a/tools/Makefile +++ b/tools/Makefile @@ -155,6 +155,7 @@ NOPEDOBJS := $(addprefix $(obj),$(NOPED_OBJ_FILES-y)) # # Use native tools and options # Define __KERNEL_STRICT_NAMES to prevent typedef overlaps +# Define _GNU_SOURCE to obtain the getline prototype from stdio.h # HOSTCPPFLAGS = -include $(SRCTREE)/include/libfdt_env.h \ -idirafter $(SRCTREE)/include \ @@ -164,7 +165,8 @@ HOSTCPPFLAGS = -include $(SRCTREE)/include/libfdt_env.h \ -I $(SRCTREE)/tools \ -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \ -DUSE_HOSTCC \ - -D__KERNEL_STRICT_NAMES + -D__KERNEL_STRICT_NAMES \ + -D_GNU_SOURCE all: $(obj).depend $(BINS) $(LOGO-y) subdirs diff --git a/tools/aisimage.c b/tools/aisimage.c index cd89145..980bf2e 100644 --- a/tools/aisimage.c +++ b/tools/aisimage.c @@ -5,9 +5,6 @@ * SPDX-License-Identifier: GPL-2.0+ */ -/* Required to obtain the getline prototype from stdio.h */ -#define _GNU_SOURCE - #include "mkimage.h" #include "aisimage.h" #include <image.h> diff --git a/tools/bmp_logo.c b/tools/bmp_logo.c index b2ad3d5..2247adc 100644 --- a/tools/bmp_logo.c +++ b/tools/bmp_logo.c @@ -179,7 +179,7 @@ int main (int argc, char *argv[]) printf("unsigned char bmp_logo_bitmap[] = {\n"); for (i=(b->height-1)*b->width; i>=0; i-=b->width) { for (x = 0; x < b->width; x++) { - b->data[(uint16_t) i + x] = (uint8_t) fgetc (fp) \ + b->data[i + x] = (uint8_t) fgetc(fp) + DEFAULT_CMAP_SIZE; } } diff --git a/tools/dtc-version.sh b/tools/dtc-version.sh new file mode 100755 index 0000000..e8c94d3 --- /dev/null +++ b/tools/dtc-version.sh @@ -0,0 +1,20 @@ +#!/bin/sh +# +# dtc-version dtc-command +# +# Prints the dtc version of `dtc-command' in a canonical 4-digit form +# such as `0222' for binutils 2.22 +# + +dtc="$*" + +if [ ${#dtc} -eq 0 ]; then + echo "Error: No dtc command specified." + printf "Usage:\n\t$0 <dtc-command>\n" + exit 1 +fi + +MAJOR=$($dtc -v | head -1 | awk '{print $NF}' | cut -d . -f 1) +MINOR=$($dtc -v | head -1 | awk '{print $NF}' | cut -d . -f 2) + +printf "%02d%02d\\n" $MAJOR $MINOR diff --git a/tools/imximage.c b/tools/imximage.c index 3f2dc68..c87669b 100644 --- a/tools/imximage.c +++ b/tools/imximage.c @@ -9,9 +9,6 @@ * SPDX-License-Identifier: GPL-2.0+ */ -/* Required to obtain the getline prototype from stdio.h */ -#define _GNU_SOURCE - #include "mkimage.h" #include <image.h> #include "imximage.h" diff --git a/tools/kwbimage.c b/tools/kwbimage.c index d08e498..1df6b20 100644 --- a/tools/kwbimage.c +++ b/tools/kwbimage.c @@ -6,9 +6,6 @@ * SPDX-License-Identifier: GPL-2.0+ */ -/* Required to obtain the getline prototype from stdio.h */ -#define _GNU_SOURCE - #include "mkimage.h" #include <image.h> #include "kwbimage.h" diff --git a/tools/logos/siemens.bmp b/tools/logos/siemens.bmp Binary files differnew file mode 100644 index 0000000..bff2b19 --- /dev/null +++ b/tools/logos/siemens.bmp diff --git a/tools/mkenvimage.c b/tools/mkenvimage.c index f685ff2..bbd3041 100644 --- a/tools/mkenvimage.c +++ b/tools/mkenvimage.c @@ -9,9 +9,6 @@ * SPDX-License-Identifier: GPL-2.0+ */ -/* We want the GNU version of basename() */ -#define _GNU_SOURCE - #include <errno.h> #include <fcntl.h> #include <stdio.h> diff --git a/tools/omapimage.c b/tools/omapimage.c index d4d77d8..00853dd 100644 --- a/tools/omapimage.c +++ b/tools/omapimage.c @@ -14,9 +14,6 @@ * SPDX-License-Identifier: GPL-2.0+ */ -/* Required to obtain the getline prototype from stdio.h */ -#define _GNU_SOURCE - #include "mkimage.h" #include <image.h> #include "omapimage.h" diff --git a/tools/pblimage.c b/tools/pblimage.c index 4542a9c..bac5faf 100644 --- a/tools/pblimage.c +++ b/tools/pblimage.c @@ -3,8 +3,6 @@ * * SPDX-License-Identifier: GPL-2.0+ */ -#define _GNU_SOURCE - #include "mkimage.h" #include <image.h> #include "pblimage.h" diff --git a/tools/ublimage.c b/tools/ublimage.c index 6495db6..b4ef7f0 100644 --- a/tools/ublimage.c +++ b/tools/ublimage.c @@ -13,9 +13,6 @@ * SPDX-License-Identifier: GPL-2.0+ */ -/* Required to obtain the getline prototype from stdio.h */ -#define _GNU_SOURCE - #include "mkimage.h" #include <image.h> #include "ublimage.h" |
