summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--board/BuS/vl_ma2sc/vl_ma2sc.c5
-rw-r--r--board/egnite/ethernut5/ethernut5.c3
-rw-r--r--board/esd/meesc/meesc.c5
-rw-r--r--board/esd/otc570/otc570.c5
-rw-r--r--board/eukrea/cpu9260/cpu9260.c5
-rw-r--r--board/ronetix/pm9261/pm9261.c5
-rw-r--r--board/ronetix/pm9263/pm9263.c5
-rw-r--r--board/ronetix/pm9g45/pm9g45.c5
-rw-r--r--drivers/mtd/nand/atmel_nand.c8
-rw-r--r--include/configs/at91sam9n12ek.h4
-rw-r--r--include/configs/cpu9260.h4
-rw-r--r--include/configs/ethernut5.h2
-rw-r--r--include/configs/meesc.h4
-rw-r--r--include/configs/otc570.h4
-rw-r--r--include/configs/pm9261.h4
-rw-r--r--include/configs/pm9263.h4
-rw-r--r--include/configs/pm9g45.h4
-rw-r--r--include/configs/vl_ma2sc.h4
18 files changed, 43 insertions, 37 deletions
diff --git a/board/BuS/vl_ma2sc/vl_ma2sc.c b/board/BuS/vl_ma2sc/vl_ma2sc.c
index 412ff3b..63f7ad9 100644
--- a/board/BuS/vl_ma2sc/vl_ma2sc.c
+++ b/board/BuS/vl_ma2sc/vl_ma2sc.c
@@ -10,6 +10,7 @@
#include <common.h>
#include <asm/sizes.h>
#include <asm/io.h>
+#include <asm/gpio.h>
#include <asm/arch/hardware.h>
#include <asm/arch/clk.h>
#include <asm/arch/at91_matrix.h>
@@ -65,10 +66,10 @@ static void vl_ma2sc_nand_hw_init(void)
/* Configure RDY/BSY */
#ifdef CONFIG_SYS_NAND_READY_PIN
- at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+ gpio_direction_input(CONFIG_SYS_NAND_READY_PIN);
#endif
/* Enable NandFlash */
- at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+ gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
}
#endif
diff --git a/board/egnite/ethernut5/ethernut5.c b/board/egnite/ethernut5/ethernut5.c
index 1f5eea5..b45213c 100644
--- a/board/egnite/ethernut5/ethernut5.c
+++ b/board/egnite/ethernut5/ethernut5.c
@@ -71,6 +71,7 @@
#include <asm/arch/at91_spi.h>
#include <asm/arch/gpio.h>
#include <asm/io.h>
+#include <asm/gpio.h>
#include "ethernut5_pwrman.h"
@@ -141,7 +142,7 @@ static void ethernut5_nand_hw_init(void)
/* Ready pin is optional. */
at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
#endif
- at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+ gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
}
#endif
diff --git a/board/esd/meesc/meesc.c b/board/esd/meesc/meesc.c
index 9bf6739..c5994e0 100644
--- a/board/esd/meesc/meesc.c
+++ b/board/esd/meesc/meesc.c
@@ -12,6 +12,7 @@
#include <common.h>
#include <asm/io.h>
+#include <asm/gpio.h>
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
@@ -74,10 +75,10 @@ static void meesc_nand_hw_init(void)
&smc->cs[3].mode);
/* Configure RDY/BSY */
- at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+ gpio_direction_input(CONFIG_SYS_NAND_READY_PIN);
/* Enable NandFlash */
- at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+ gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
}
#endif /* CONFIG_CMD_NAND */
diff --git a/board/esd/otc570/otc570.c b/board/esd/otc570/otc570.c
index acc1b31..4751d0a 100644
--- a/board/esd/otc570/otc570.c
+++ b/board/esd/otc570/otc570.c
@@ -12,6 +12,7 @@
#include <common.h>
#include <asm/io.h>
+#include <asm/gpio.h>
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
@@ -82,10 +83,10 @@ static void otc570_nand_hw_init(void)
&smc->cs[3].mode);
/* Configure RDY/BSY */
- at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+ gpio_direction_input(CONFIG_SYS_NAND_READY_PIN);
/* Enable NandFlash */
- at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+ gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
}
#endif /* CONFIG_CMD_NAND */
diff --git a/board/eukrea/cpu9260/cpu9260.c b/board/eukrea/cpu9260/cpu9260.c
index 274f72d..01ecccb 100644
--- a/board/eukrea/cpu9260/cpu9260.c
+++ b/board/eukrea/cpu9260/cpu9260.c
@@ -12,6 +12,7 @@
#include <common.h>
#include <asm/io.h>
+#include <asm/gpio.h>
#include <asm/arch/at91sam9260.h>
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_common.h>
@@ -78,10 +79,10 @@ static void cpu9260_nand_hw_init(void)
writel(1 << ATMEL_ID_PIOC, &pmc->pcer);
/* Configure RDY/BSY */
- at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+ gpio_direction_input(CONFIG_SYS_NAND_READY_PIN);
/* Enable NandFlash */
- at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+ gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
}
#endif
diff --git a/board/ronetix/pm9261/pm9261.c b/board/ronetix/pm9261/pm9261.c
index a2a569b..a634383 100644
--- a/board/ronetix/pm9261/pm9261.c
+++ b/board/ronetix/pm9261/pm9261.c
@@ -11,6 +11,7 @@
#include <common.h>
#include <asm/sizes.h>
#include <asm/io.h>
+#include <asm/gpio.h>
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
@@ -73,10 +74,10 @@ static void pm9261_nand_hw_init(void)
&pmc->pcer);
/* Configure RDY/BSY */
- at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+ gpio_direction_input(CONFIG_SYS_NAND_READY_PIN);
/* Enable NandFlash */
- at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+ gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* NANDOE */
at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* NANDWE */
diff --git a/board/ronetix/pm9263/pm9263.c b/board/ronetix/pm9263/pm9263.c
index 48eba99..3cedeef 100644
--- a/board/ronetix/pm9263/pm9263.c
+++ b/board/ronetix/pm9263/pm9263.c
@@ -11,6 +11,7 @@
#include <common.h>
#include <asm/sizes.h>
#include <asm/io.h>
+#include <asm/gpio.h>
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
@@ -67,10 +68,10 @@ static void pm9263_nand_hw_init(void)
&smc->cs[3].mode);
/* Configure RDY/BSY */
- at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+ gpio_direction_input(CONFIG_SYS_NAND_READY_PIN);
/* Enable NandFlash */
- at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+ gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
}
#endif
diff --git a/board/ronetix/pm9g45/pm9g45.c b/board/ronetix/pm9g45/pm9g45.c
index 5bb5a3c..c9f2747 100644
--- a/board/ronetix/pm9g45/pm9g45.c
+++ b/board/ronetix/pm9g45/pm9g45.c
@@ -14,6 +14,7 @@
#include <common.h>
#include <asm/sizes.h>
#include <asm/io.h>
+#include <asm/gpio.h>
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
@@ -66,11 +67,11 @@ static void pm9g45_nand_hw_init(void)
#ifdef CONFIG_SYS_NAND_READY_PIN
/* Configure RDY/BSY */
- at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+ gpio_direction_input(CONFIG_SYS_NAND_READY_PIN);
#endif
/* Enable NandFlash */
- at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+ gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
}
#endif
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index da83f06..99fc86c 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -12,9 +12,8 @@
*/
#include <common.h>
-#include <asm/arch/hardware.h>
+#include <asm/gpio.h>
#include <asm/arch/gpio.h>
-#include <asm/arch/at91_pio.h>
#include <malloc.h>
#include <nand.h>
@@ -1146,8 +1145,7 @@ static void at91_nand_hwcontrol(struct mtd_info *mtd,
IO_ADDR_W |= CONFIG_SYS_NAND_MASK_ALE;
#ifdef CONFIG_SYS_NAND_ENABLE_PIN
- at91_set_gpio_value(CONFIG_SYS_NAND_ENABLE_PIN,
- !(ctrl & NAND_NCE));
+ gpio_set_value(CONFIG_SYS_NAND_ENABLE_PIN, !(ctrl & NAND_NCE));
#endif
this->IO_ADDR_W = (void *) IO_ADDR_W;
}
@@ -1159,7 +1157,7 @@ static void at91_nand_hwcontrol(struct mtd_info *mtd,
#ifdef CONFIG_SYS_NAND_READY_PIN
static int at91_nand_ready(struct mtd_info *mtd)
{
- return at91_get_gpio_value(CONFIG_SYS_NAND_READY_PIN);
+ return gpio_get_value(CONFIG_SYS_NAND_READY_PIN);
}
#endif
diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h
index 4ec1799..e23549d 100644
--- a/include/configs/at91sam9n12ek.h
+++ b/include/configs/at91sam9n12ek.h
@@ -113,8 +113,8 @@
#define CONFIG_SYS_NAND_BASE 0x40000000
#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTD, 4
-#define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTD, 5
+#define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PD(4)
+#define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PD(5)
/* PMECC & PMERRLOC */
#define CONFIG_ATMEL_NAND_HWECC
diff --git a/include/configs/cpu9260.h b/include/configs/cpu9260.h
index 22c0a09..39f7062 100644
--- a/include/configs/cpu9260.h
+++ b/include/configs/cpu9260.h
@@ -280,8 +280,8 @@
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x40000000
#define CONFIG_SYS_NAND_DBW_8 1
-#define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTC, 13
-#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTC, 14
+#define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PC(13)
+#define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PC(14)
#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h
index 252df54..480d867 100644
--- a/include/configs/ethernut5.h
+++ b/include/configs/ethernut5.h
@@ -149,7 +149,7 @@
#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
/* our CLE is AD22 */
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTC, 14
+#define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PC(14)
#endif
/* JFFS2 */
diff --git a/include/configs/meesc.h b/include/configs/meesc.h
index 91f6e2f..86ce5f2 100644
--- a/include/configs/meesc.h
+++ b/include/configs/meesc.h
@@ -143,8 +143,8 @@
# define CONFIG_SYS_NAND_DBW_8
# define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
# define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
-# define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTD, 15
-# define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTA, 22
+# define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PD(15)
+# define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PA(22)
#endif
/* Ethernet */
diff --git a/include/configs/otc570.h b/include/configs/otc570.h
index 3f4e073..629967d 100644
--- a/include/configs/otc570.h
+++ b/include/configs/otc570.h
@@ -193,8 +193,8 @@
# define CONFIG_SYS_NAND_DBW_8
# define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
# define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
-# define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTD, 15
-# define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTA, 22
+# define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PD(15)
+# define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PA(22)
#endif
/* Ethernet */
diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h
index acf6d61..f977e25 100644
--- a/include/configs/pm9261.h
+++ b/include/configs/pm9261.h
@@ -219,8 +219,8 @@
#define CONFIG_SYS_NAND_MASK_ALE (1 << 22)
/* our CLE is AD21 */
#define CONFIG_SYS_NAND_MASK_CLE (1 << 21)
-#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTC, 14
-#define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTA, 16
+#define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PC(14)
+#define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PA(16)
/* NOR flash */
#define CONFIG_SYS_FLASH_CFI 1
diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h
index 533e249..dffc336 100644
--- a/include/configs/pm9263.h
+++ b/include/configs/pm9263.h
@@ -241,8 +241,8 @@
#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
/* our CLE is AD22 */
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTD, 15
-#define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTB, 30
+#define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PD(15)
+#define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PB(30)
#endif
diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h
index e0c388e..03a25c8 100644
--- a/include/configs/pm9g45.h
+++ b/include/configs/pm9g45.h
@@ -106,8 +106,8 @@
#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
/* our CLE is AD22 */
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTC, 14
-#define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTD, 3
+#define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PC(14)
+#define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PD(3)
#endif
diff --git a/include/configs/vl_ma2sc.h b/include/configs/vl_ma2sc.h
index aacb84c..88aaa95 100644
--- a/include/configs/vl_ma2sc.h
+++ b/include/configs/vl_ma2sc.h
@@ -320,8 +320,8 @@
#define CONFIG_SYS_NAND_DBW_8 1
#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) /* our ALE is AD21 */
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) /* our CLE is AD22 */
-#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTD, 15
-#define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTB, 0
+#define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PD(15)
+#define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PB(0)
#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#endif