diff options
338 files changed, 16826 insertions, 6324 deletions
@@ -46,6 +46,7 @@ /u-boot.ais /u-boot.dtb /u-boot.sb +/u-boot.bd /u-boot.geany # diff --git a/MAINTAINERS b/MAINTAINERS index 2f06630..14075af 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -607,6 +607,7 @@ Enric Balletbo i Serra <eballetbo@iseebcn.com> igep0020 ARM ARMV7 (OMAP3xx SoC) igep0030 ARM ARMV7 (OMAP3xx SoC) igep0032 ARM ARMV7 (OMAP3xx SoC) + igep0033 ARM ARMV7 (AM33xx Soc) Eric Benard <eric@eukrea.com> @@ -664,6 +665,7 @@ Fabio Estevam <fabio.estevam@freescale.com> mx6qsabresd i.MX6Q mx6qsabreauto i.MX6Q wandboard i.MX6DL/S + mx6slevk i.MX6SL Daniel Gorsulowski <daniel.gorsulowski@esd.eu> @@ -683,7 +685,7 @@ Simon Guinot <simon.guinot@sequanux.org> Igor Grinberg <grinberg@compulab.co.il> - cm-t35 ARM ARMV7 (OMAP3xx Soc) + cm_t35 ARM ARMV7 (OMAP3xx Soc) Stefan Herbrechtsmeier <stefan@code.herbrechtsmeier.net> @@ -848,6 +850,10 @@ Sricharan R <r.sricharan@ti.com> omap4_sdp4430 ARM ARMV7 (OMAP4xx SoC) omap5_evm ARM ARMV7 (OMAP5xx Soc) +Suriyan Ramasami <suriyan.r@gmail.com> + + goflexhome ARM926EJS (Kirkwood SoC) + Thierry Reding <thierry.reding@avionic-design.de> plutux Tegra20 (ARM7 & A9 Dual Core) @@ -877,6 +883,8 @@ Stefan Roese <sr@denx.de> x600 ARM926EJS (spear600 Soc) + titanium i.MX6Q + pdnb3 xscale/ixp scpu xscale/ixp @@ -914,6 +922,7 @@ Matt Sealey <matt@genesi-usa.com> Bo Shen <voice.shen@atmel.com> at91sam9x5ek ARM926EJS (AT91SAM9G15,G25,G35,X25,X35 SoC) + sama5d3xek ARMV7 (SAMA5D31, D33, D34, D35 SoC) Rajeshwari Shinde <rajeshwari.s@samsung.com> @@ -954,6 +963,7 @@ Marek Vasut <marek.vasut@gmail.com> mx23_olinuxino i.MX23 m28evk i.MX28 sc_sps_1 i.MX28 + m53evk i.MX53 Hugo Villeneuve <hugo.villeneuve@lyrtech.com> @@ -961,7 +971,8 @@ Hugo Villeneuve <hugo.villeneuve@lyrtech.com> Matt Waddel <matt.waddel@linaro.org> - ca9x4_ct_vxp ARM ARMV7 (Quad Core) + vexpress_ca9x4 ARM ARMV7 (Quad Core) + vexpress_ca5x2 ARM ARMV7 (Dual Core) Otavio Salvador <otavio@ossystems.com.br> @@ -1018,6 +1029,9 @@ Richard Woodruff <r-woodruff2@ti.com> omap2420h4 ARM1136EJS +Josh Wu <josh.wu@atmel.com> + at91sam9n12ek ARM926EJS (AT91SAM9N12 SoC) + Ilya Yanok <yanok@emcraft.com> mcx ARM ARMV7 (AM35x SoC) @@ -341,7 +341,7 @@ ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(C LIBS-y += $(CPUDIR)/omap-common/libomap-common.o endif -ifneq (,$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35)) +ifneq (,$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35 mxs)) LIBS-y += arch/$(ARCH)/imx-common/libimx-common.o endif @@ -522,13 +522,9 @@ $(obj)u-boot.ais: $(obj)spl/u-boot-spl.bin $(obj)u-boot.img cat $(obj)spl/u-boot-spl-pad.ais $(obj)u-boot.img > \ $(obj)u-boot.ais -# Specify the target for use in elftosb call -ELFTOSB_TARGET-$(CONFIG_MX23) = imx23 -ELFTOSB_TARGET-$(CONFIG_MX28) = imx28 $(obj)u-boot.sb: $(obj)u-boot.bin $(obj)spl/u-boot-spl.bin - elftosb -zf $(ELFTOSB_TARGET-y) -c $(TOPDIR)/$(CPUDIR)/$(SOC)/u-boot-$(ELFTOSB_TARGET-y).bd \ - -o $(obj)u-boot.sb + $(MAKE) -C $(SRCTREE)/$(CPUDIR)/$(SOC)/ $(OBJTREE)/u-boot.sb # On x600 (SPEAr600) U-Boot is appended to U-Boot SPL. # Both images are created using mkimage (crc etc), so that the ROM @@ -547,18 +543,15 @@ $(obj)u-boot.spr: $(obj)u-boot.img $(obj)spl/u-boot-spl.bin cat $(obj)spl/u-boot-spl-pad.img $(obj)u-boot.img > $@ ifneq ($(CONFIG_TEGRA),) -ifeq ($(CONFIG_OF_SEPARATE),y) -nodtb=dtb -dtbfile=$(obj)u-boot.dtb -else -nodtb=nodtb -dtbfile= -endif - -$(obj)u-boot-$(nodtb)-tegra.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin $(dtbfile) +$(obj)u-boot-nodtb-tegra.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SYS_TEXT_BASE) -O binary $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin - cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin $(dtbfile) > $@ + cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $@ rm $(obj)spl/u-boot-spl-pad.bin + +ifeq ($(CONFIG_OF_SEPARATE),y) +$(obj)u-boot-dtb-tegra.bin: $(obj)u-boot-nodtb-tegra.bin $(obj)u-boot.dtb + cat $(obj)u-boot-nodtb-tegra.bin $(obj)u-boot.dtb > $@ +endif endif $(obj)u-boot-img.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.img @@ -871,6 +864,7 @@ clobber: tidy @rm -f $(obj)u-boot.ais @rm -f $(obj)u-boot.dtb @rm -f $(obj)u-boot.sb + @rm -f $(obj)u-boot.bd @rm -f $(obj)u-boot.spr @rm -f $(obj)nand_spl/{u-boot.{lds,lst},System.map} @rm -f $(obj)nand_spl/{u-boot-nand_spl.lds,u-boot-spl,u-boot-spl.map} @@ -843,6 +843,7 @@ The following options need to be configured: CONFIG_CMD_FDOS * Dos diskette Support CONFIG_CMD_FLASH flinfo, erase, protect CONFIG_CMD_FPGA FPGA device initialization support + CONFIG_CMD_FUSE Device fuse support CONFIG_CMD_GETTIME * Get time since boot CONFIG_CMD_GO * the 'go' command (exec code) CONFIG_CMD_GREPENV * search environment @@ -3345,6 +3346,10 @@ Configuration Settings: offset _bss_start_ofs from CONFIG_SYS_TEXT_BASE, rather than directly. You should not need to touch this setting. +- CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC (OMAP only) + This is set by OMAP boards for the max time that reset should + be asserted. See doc/README.omap-reset-time for details on how + the value can be calulated on a given board. The following definitions that deal with the placement and management of environment data (variable area); in general, we support the diff --git a/arch/arm/config.mk b/arch/arm/config.mk index 461899e..dc64160 100644 --- a/arch/arm/config.mk +++ b/arch/arm/config.mk @@ -31,6 +31,9 @@ CONFIG_STANDALONE_LOAD_ADDR = 0xc100000 endif endif +LDFLAGS_FINAL += --gc-sections +PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections + # Support generic board on ARM __HAVE_ARCH_GENERIC_BOARD := y diff --git a/arch/arm/cpu/arm1136/mx35/Makefile b/arch/arm/cpu/arm1136/mx35/Makefile index f4ababb..23adac0 100644 --- a/arch/arm/cpu/arm1136/mx35/Makefile +++ b/arch/arm/cpu/arm1136/mx35/Makefile @@ -29,7 +29,6 @@ LIB = $(obj)lib$(SOC).o COBJS += generic.o COBJS += timer.o -COBJS += iomux.o COBJS += mx35_sdram.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/arch/arm/cpu/arm1136/mx35/iomux.c b/arch/arm/cpu/arm1136/mx35/iomux.c deleted file mode 100644 index a302575..0000000 --- a/arch/arm/cpu/arm1136/mx35/iomux.c +++ /dev/null @@ -1,114 +0,0 @@ -/* - * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/imx-regs.h> -#include <asm/arch/mx35_pins.h> -#include <asm/arch/iomux.h> - -/* - * IOMUX register (base) addresses - */ -enum iomux_reg_addr { - IOMUXGPR = IOMUXC_BASE_ADDR, /* General purpose */ - IOMUXSW_MUX_CTL = IOMUXC_BASE_ADDR + 4, /* MUX control */ - IOMUXSW_MUX_END = IOMUXC_BASE_ADDR + 0x324, /* last MUX control */ - IOMUXSW_PAD_CTL = IOMUXC_BASE_ADDR + 0x328, /* Pad control */ - IOMUXSW_PAD_END = IOMUXC_BASE_ADDR + 0x794, /* last Pad control */ - IOMUXSW_INPUT_CTL = IOMUXC_BASE_ADDR + 0x7AC, /* input select */ - IOMUXSW_INPUT_END = IOMUXC_BASE_ADDR + 0x9F4, /* last input select */ -}; - -#define MUX_PIN_NUM_MAX \ - (((IOMUXSW_PAD_END - IOMUXSW_PAD_CTL) >> 2) + 1) -#define MUX_INPUT_NUM_MUX \ - (((IOMUXSW_INPUT_END - IOMUXSW_INPUT_CTL) >> 2) + 1) - -/* - * Request ownership for an IO pin. This function has to be the first one - * being called before that pin is used. - */ -void mxc_request_iomux(iomux_pin_name_t pin, iomux_pin_cfg_t cfg) -{ - u32 mux_reg = PIN_TO_IOMUX_MUX(pin); - - if (mux_reg != NON_MUX_I) { - mux_reg += IOMUXGPR; - writel(cfg, mux_reg); - } -} - -/* - * Release ownership for an IO pin - */ -void mxc_free_iomux(iomux_pin_name_t pin, iomux_pin_cfg_t cfg) -{ -} - -/* - * This function configures the pad value for a IOMUX pin. - * - * @param pin a pin number as defined in iomux_pin_name_t - * @param config the ORed value of elements defined in iomux_pad_config_t - */ -void mxc_iomux_set_pad(iomux_pin_name_t pin, u32 config) -{ - u32 pad_reg = IOMUXGPR + PIN_TO_IOMUX_PAD(pin); - - writel(config, pad_reg); -} - -/* - * This function enables/disables the general purpose function for a particular - * signal. - * - * @param gp one signal as defined in iomux_gp_func_t - * @param en enable/disable - */ -void mxc_iomux_set_gpr(iomux_gp_func_t gp, int en) -{ - u32 l; - - l = readl(IOMUXGPR); - if (en) - l |= gp; - else - l &= ~gp; - - writel(l, IOMUXGPR); -} - -/* - * This function configures input path. - * - * @param input index of input select register as defined in - * iomux_input_select_t - * @param config the binary value of elements defined in - * iomux_input_config_t - */ -void mxc_iomux_set_input(iomux_input_select_t input, u32 config) -{ - u32 reg = IOMUXSW_INPUT_CTL + (input << 2); - - writel(config, reg); -} diff --git a/arch/arm/cpu/arm720t/start.S b/arch/arm/cpu/arm720t/start.S index 9facc7e..f425a55 100644 --- a/arch/arm/cpu/arm720t/start.S +++ b/arch/arm/cpu/arm720t/start.S @@ -244,9 +244,9 @@ c_runtime_cpu_setup: ************************************************************************* */ +#ifndef CONFIG_SKIP_LOWLEVEL_INIT cpu_init_crit: -#if !defined(CONFIG_TEGRA) mov ip, lr /* * before relocating, we have to setup RAM timing @@ -255,9 +255,9 @@ cpu_init_crit: */ bl lowlevel_init mov lr, ip -#endif mov pc, lr +#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ #ifndef CONFIG_SPL_BUILD diff --git a/arch/arm/cpu/arm926ejs/at91/Makefile b/arch/arm/cpu/arm926ejs/at91/Makefile index 346e58f..c4408f6 100644 --- a/arch/arm/cpu/arm926ejs/at91/Makefile +++ b/arch/arm/cpu/arm926ejs/at91/Makefile @@ -35,6 +35,7 @@ COBJS-$(CONFIG_AT91SAM9263) += at91sam9263_devices.o COBJS-$(CONFIG_AT91SAM9RL) += at91sam9rl_devices.o COBJS-$(CONFIG_AT91SAM9M10G45) += at91sam9m10g45_devices.o COBJS-$(CONFIG_AT91SAM9G45) += at91sam9m10g45_devices.o +COBJS-$(CONFIG_AT91SAM9N12) += at91sam9n12_devices.o COBJS-$(CONFIG_AT91SAM9X5) += at91sam9x5_devices.o COBJS-$(CONFIG_AT91_EFLASH) += eflash.o COBJS-$(CONFIG_AT91_LED) += led.o diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c index 19ec615..5e995e1 100644 --- a/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c +++ b/arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c @@ -203,6 +203,10 @@ void at91_macb_hw_init(void) #if defined(CONFIG_GENERIC_ATMEL_MCI) void at91_mci_hw_init(void) { + /* Enable mci clock */ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + writel(1 << ATMEL_ID_MCI, &pmc->pcer); + at91_set_a_periph(AT91_PIO_PORTA, 8, 1); /* MCCK */ #if defined(CONFIG_ATMEL_MCI_PORTB) at91_set_b_periph(AT91_PIO_PORTA, 1, 1); /* MCCDB */ diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9n12_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9n12_devices.c new file mode 100644 index 0000000..6eaeac0 --- /dev/null +++ b/arch/arm/cpu/arm926ejs/at91/at91sam9n12_devices.c @@ -0,0 +1,177 @@ +/* + * (C) Copyright 2013 Atmel Corporation + * Josh Wu <josh.wu@atmel.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/at91_common.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/at91_pio.h> + +unsigned int has_lcdc() +{ + return 1; +} + +void at91_serial0_hw_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 0, 1); /* TXD0 */ + at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* RXD0 */ + writel(1 << ATMEL_ID_USART0, &pmc->pcer); +} + +void at91_serial1_hw_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 5, 1); /* TXD1 */ + at91_set_a_periph(AT91_PIO_PORTA, 6, 0); /* RXD1 */ + writel(1 << ATMEL_ID_USART1, &pmc->pcer); +} + +void at91_serial2_hw_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 7, 1); /* TXD2 */ + at91_set_a_periph(AT91_PIO_PORTA, 8, 0); /* RXD2 */ + writel(1 << ATMEL_ID_USART2, &pmc->pcer); +} + +void at91_serial3_hw_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + at91_set_b_periph(AT91_PIO_PORTC, 22, 1); /* TXD3 */ + at91_set_b_periph(AT91_PIO_PORTC, 23, 0); /* RXD3 */ + writel(1 << ATMEL_ID_USART3, &pmc->pcer); +} + +void at91_seriald_hw_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 10, 1); /* DTXD */ + at91_set_a_periph(AT91_PIO_PORTA, 9, 0); /* DRXD */ + writel(1 << ATMEL_ID_SYS, &pmc->pcer); +} + +#ifdef CONFIG_ATMEL_SPI +void at91_spi0_hw_init(unsigned long cs_mask) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 11, 0); /* SPI0_MISO */ + at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* SPI0_MOSI */ + at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* SPI0_SPCK */ + + /* Enable clock */ + writel(1 << ATMEL_ID_SPI0, &pmc->pcer); + + if (cs_mask & (1 << 0)) + at91_set_pio_output(AT91_PIO_PORTA, 14, 1); + if (cs_mask & (1 << 1)) + at91_set_pio_output(AT91_PIO_PORTA, 7, 1); + if (cs_mask & (1 << 2)) + at91_set_pio_output(AT91_PIO_PORTA, 1, 1); + if (cs_mask & (1 << 3)) + at91_set_pio_output(AT91_PIO_PORTB, 3, 1); +} + +void at91_spi1_hw_init(unsigned long cs_mask) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + at91_set_b_periph(AT91_PIO_PORTA, 21, 0); /* SPI1_MISO */ + at91_set_b_periph(AT91_PIO_PORTA, 22, 0); /* SPI1_MOSI */ + at91_set_b_periph(AT91_PIO_PORTA, 23, 0); /* SPI1_SPCK */ + + /* Enable clock */ + writel(1 << ATMEL_ID_SPI1, &pmc->pcer); + + if (cs_mask & (1 << 0)) + at91_set_pio_output(AT91_PIO_PORTA, 8, 1); + if (cs_mask & (1 << 1)) + at91_set_pio_output(AT91_PIO_PORTA, 0, 1); + if (cs_mask & (1 << 2)) + at91_set_pio_output(AT91_PIO_PORTA, 31, 1); + if (cs_mask & (1 << 3)) + at91_set_pio_output(AT91_PIO_PORTA, 30, 1); +} +#endif + +void at91_mci_hw_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTA, 17, 0); /* MCCK */ + at91_set_a_periph(AT91_PIO_PORTA, 16, 0); /* MCCDA */ + at91_set_a_periph(AT91_PIO_PORTA, 15, 0); /* MCDA0 */ + at91_set_a_periph(AT91_PIO_PORTA, 18, 0); /* MCDA1 */ + at91_set_a_periph(AT91_PIO_PORTA, 19, 0); /* MCDA2 */ + at91_set_a_periph(AT91_PIO_PORTA, 20, 0); /* MCDA3 */ + + writel(1 << ATMEL_ID_HSMCI0, &pmc->pcer); +} + +#ifdef CONFIG_LCD +void at91_lcd_hw_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + at91_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDDPWR */ + at91_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDVSYNC */ + at91_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDHSYNC */ + at91_set_a_periph(AT91_PIO_PORTC, 28, 0); /* LCDDOTCK */ + at91_set_a_periph(AT91_PIO_PORTC, 29, 0); /* LCDDEN */ + at91_set_a_periph(AT91_PIO_PORTC, 30, 0); /* LCDDOTCK */ + + at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* LCDD0 */ + at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* LCDD1 */ + at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* LCDD2 */ + at91_set_a_periph(AT91_PIO_PORTC, 3, 0); /* LCDD3 */ + at91_set_a_periph(AT91_PIO_PORTC, 4, 0); /* LCDD4 */ + at91_set_a_periph(AT91_PIO_PORTC, 5, 0); /* LCDD5 */ + at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* LCDD6 */ + at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* LCDD7 */ + at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* LCDD8 */ + at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* LCDD9 */ + at91_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDD10 */ + at91_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDD11 */ + at91_set_a_periph(AT91_PIO_PORTC, 12, 0); /* LCDD12 */ + at91_set_a_periph(AT91_PIO_PORTC, 13, 0); /* LCDD13 */ + at91_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDD14 */ + at91_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDD15 */ + at91_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDD16 */ + at91_set_a_periph(AT91_PIO_PORTC, 17, 0); /* LCDD17 */ + at91_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDD18 */ + at91_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDD19 */ + at91_set_a_periph(AT91_PIO_PORTC, 20, 0); /* LCDD20 */ + at91_set_a_periph(AT91_PIO_PORTC, 21, 0); /* LCDD21 */ + at91_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDD22 */ + at91_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDD23 */ + + writel(1 << ATMEL_ID_LCDC, &pmc->pcer); +} +#endif diff --git a/arch/arm/cpu/arm926ejs/at91/clock.c b/arch/arm/cpu/arm926ejs/at91/clock.c index f825388..5b4923f 100644 --- a/arch/arm/cpu/arm926ejs/at91/clock.c +++ b/arch/arm/cpu/arm926ejs/at91/clock.c @@ -156,7 +156,7 @@ int at91_clock_init(unsigned long main_clock) */ mckr = readl(&pmc->mckr); #if defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) \ - || defined(CONFIG_AT91SAM9X5) + || defined(CONFIG_AT91SAM9N12) || defined(CONFIG_AT91SAM9X5) /* plla divisor by 2 */ gd->arch.plla_rate_hz /= (1 << ((mckr & 1 << 12) >> 12)); #endif @@ -171,7 +171,7 @@ int at91_clock_init(unsigned long main_clock) if (mckr & AT91_PMC_MCKR_MDIV_MASK) freq /= 2; /* processor clock division */ #elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) \ - || defined(CONFIG_AT91SAM9X5) + || defined(CONFIG_AT91SAM9N12) || defined(CONFIG_AT91SAM9X5) /* mdiv <==> divisor * 0 <==> 1 * 1 <==> 2 diff --git a/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c b/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c index ff2e2e3..127beb8 100644 --- a/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c +++ b/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c @@ -32,6 +32,14 @@ #include <asm/arch/emif_defs.h> #include <asm/arch/pll_defs.h> +void davinci_enable_uart0(void) +{ + lpsc_on(DAVINCI_LPSC_UART0); + + /* Bringup UART0 out of reset */ + REG(UART0_PWREMU_MGMT) = 0x00006001; +} + #if defined(CONFIG_SYS_DA850_PLL_INIT) void da850_waitloop(unsigned long loopcnt) { diff --git a/arch/arm/cpu/arm926ejs/mx25/generic.c b/arch/arm/cpu/arm926ejs/mx25/generic.c index 679273b..7cbbe65 100644 --- a/arch/arm/cpu/arm926ejs/mx25/generic.c +++ b/arch/arm/cpu/arm926ejs/mx25/generic.c @@ -27,7 +27,6 @@ #include <netdev.h> #include <asm/io.h> #include <asm/arch/imx-regs.h> -#include <asm/arch/imx25-pinmux.h> #include <asm/arch/clock.h> #ifdef CONFIG_FSL_ESDHC @@ -248,123 +247,7 @@ int cpu_mmc_init(bd_t *bis) } #endif -#ifdef CONFIG_MXC_UART -void mx25_uart1_init_pins(void) -{ - struct iomuxc_mux_ctl *muxctl; - struct iomuxc_pad_ctl *padctl; - u32 inpadctl; - u32 outpadctl; - u32 muxmode0; - - muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE; - padctl = (struct iomuxc_pad_ctl *)IMX_IOPADCTL_BASE; - muxmode0 = MX25_PIN_MUX_MODE(0); - /* - * set up input pins with hysteresis and 100K pull-ups - */ - inpadctl = MX25_PIN_PAD_CTL_HYS - | MX25_PIN_PAD_CTL_PKE - | MX25_PIN_PAD_CTL_PUE | MX25_PIN_PAD_CTL_100K_PU; - - /* - * set up output pins with 100K pull-downs - * FIXME: need to revisit this - * PUE is ignored if PKE is not set - * so the right value here is likely - * 0x0 for no pull up/down - * or - * 0xc0 for 100k pull down - */ - outpadctl = MX25_PIN_PAD_CTL_PUE | MX25_PIN_PAD_CTL_100K_PD; - - /* UART1 */ - /* rxd */ - writel(muxmode0, &muxctl->pad_uart1_rxd); - writel(inpadctl, &padctl->pad_uart1_rxd); - - /* txd */ - writel(muxmode0, &muxctl->pad_uart1_txd); - writel(outpadctl, &padctl->pad_uart1_txd); - - /* rts */ - writel(muxmode0, &muxctl->pad_uart1_rts); - writel(outpadctl, &padctl->pad_uart1_rts); - - /* cts */ - writel(muxmode0, &muxctl->pad_uart1_cts); - writel(inpadctl, &padctl->pad_uart1_cts); -} -#endif /* CONFIG_MXC_UART */ - #ifdef CONFIG_FEC_MXC -void mx25_fec_init_pins(void) -{ - struct iomuxc_mux_ctl *muxctl; - struct iomuxc_pad_ctl *padctl; - u32 inpadctl_100kpd; - u32 inpadctl_22kpu; - u32 outpadctl; - u32 muxmode0; - - muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE; - padctl = (struct iomuxc_pad_ctl *)IMX_IOPADCTL_BASE; - muxmode0 = MX25_PIN_MUX_MODE(0); - inpadctl_100kpd = MX25_PIN_PAD_CTL_HYS - | MX25_PIN_PAD_CTL_PKE - | MX25_PIN_PAD_CTL_PUE | MX25_PIN_PAD_CTL_100K_PD; - inpadctl_22kpu = MX25_PIN_PAD_CTL_HYS - | MX25_PIN_PAD_CTL_PKE - | MX25_PIN_PAD_CTL_PUE | MX25_PIN_PAD_CTL_22K_PU; - /* - * set up output pins with 100K pull-downs - * FIXME: need to revisit this - * PUE is ignored if PKE is not set - * so the right value here is likely - * 0x0 for no pull - * or - * 0xc0 for 100k pull down - */ - outpadctl = MX25_PIN_PAD_CTL_PUE | MX25_PIN_PAD_CTL_100K_PD; - - /* FEC_TX_CLK */ - writel(muxmode0, &muxctl->pad_fec_tx_clk); - writel(inpadctl_100kpd, &padctl->pad_fec_tx_clk); - - /* FEC_RX_DV */ - writel(muxmode0, &muxctl->pad_fec_rx_dv); - writel(inpadctl_100kpd, &padctl->pad_fec_rx_dv); - - /* FEC_RDATA0 */ - writel(muxmode0, &muxctl->pad_fec_rdata0); - writel(inpadctl_100kpd, &padctl->pad_fec_rdata0); - - /* FEC_TDATA0 */ - writel(muxmode0, &muxctl->pad_fec_tdata0); - writel(outpadctl, &padctl->pad_fec_tdata0); - - /* FEC_TX_EN */ - writel(muxmode0, &muxctl->pad_fec_tx_en); - writel(outpadctl, &padctl->pad_fec_tx_en); - - /* FEC_MDC */ - writel(muxmode0, &muxctl->pad_fec_mdc); - writel(outpadctl, &padctl->pad_fec_mdc); - - /* FEC_MDIO */ - writel(muxmode0, &muxctl->pad_fec_mdio); - writel(inpadctl_22kpu, &padctl->pad_fec_mdio); - - /* FEC_RDATA1 */ - writel(muxmode0, &muxctl->pad_fec_rdata1); - writel(inpadctl_100kpd, &padctl->pad_fec_rdata1); - - /* FEC_TDATA1 */ - writel(muxmode0, &muxctl->pad_fec_tdata1); - writel(outpadctl, &padctl->pad_fec_tdata1); - -} - void imx_get_mac_from_fuse(int dev_id, unsigned char *mac) { int i; diff --git a/arch/arm/cpu/arm926ejs/mxs/Makefile b/arch/arm/cpu/arm926ejs/mxs/Makefile index eeecf89..038c1c1 100644 --- a/arch/arm/cpu/arm926ejs/mxs/Makefile +++ b/arch/arm/cpu/arm926ejs/mxs/Makefile @@ -40,6 +40,16 @@ all: $(obj).depend $(LIB) $(LIB): $(OBJS) $(call cmd_link_o_target, $(OBJS)) +# Specify the target for use in elftosb call +ELFTOSB_TARGET-$(CONFIG_MX23) = imx23 +ELFTOSB_TARGET-$(CONFIG_MX28) = imx28 + +$(OBJTREE)/u-boot.bd: $(SRCTREE)/$(CPUDIR)/$(SOC)/u-boot-$(ELFTOSB_TARGET-y).bd + sed "s@OBJTREE@$(OBJTREE)@g" $^ > $@ + +$(OBJTREE)/u-boot.sb: $(OBJTREE)/u-boot.bin $(OBJTREE)/spl/u-boot-spl.bin $(OBJTREE)/u-boot.bd + elftosb -zf $(ELFTOSB_TARGET-y) -c $(OBJTREE)/u-boot.bd -o $(OBJTREE)/u-boot.sb + ######################################################################### # defines $(obj).depend target diff --git a/arch/arm/cpu/arm926ejs/mxs/clock.c b/arch/arm/cpu/arm926ejs/mxs/clock.c index 43e7663..f94107f 100644 --- a/arch/arm/cpu/arm926ejs/mxs/clock.c +++ b/arch/arm/cpu/arm926ejs/mxs/clock.c @@ -325,6 +325,99 @@ void mxs_set_ssp_busclock(unsigned int bus, uint32_t freq) bus, tgtclk, freq); } +void mxs_set_lcdclk(uint32_t freq) +{ + struct mxs_clkctrl_regs *clkctrl_regs = + (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; + uint32_t fp, x, k_rest, k_best, x_best, tk; + int32_t k_best_l = 999, k_best_t = 0, x_best_l = 0xff, x_best_t = 0xff; + + if (freq == 0) + return; + +#if defined(CONFIG_MX23) + writel(CLKCTRL_CLKSEQ_BYPASS_PIX, &clkctrl_regs->hw_clkctrl_clkseq_clr); +#elif defined(CONFIG_MX28) + writel(CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF, &clkctrl_regs->hw_clkctrl_clkseq_clr); +#endif + + /* + * / 18 \ 1 1 + * freq kHz = | 480000000 Hz * -- | * --- * ------ + * \ x / k 1000 + * + * 480000000 Hz 18 + * ------------ * -- + * freq kHz x + * k = ------------------- + * 1000 + */ + + fp = ((PLL_FREQ_KHZ * 1000) / freq) * 18; + + for (x = 18; x <= 35; x++) { + tk = fp / x; + if ((tk / 1000 == 0) || (tk / 1000 > 255)) + continue; + + k_rest = tk % 1000; + + if (k_rest < (k_best_l % 1000)) { + k_best_l = tk; + x_best_l = x; + } + + if (k_rest > (k_best_t % 1000)) { + k_best_t = tk; + x_best_t = x; + } + } + + if (1000 - (k_best_t % 1000) > (k_best_l % 1000)) { + k_best = k_best_l; + x_best = x_best_l; + } else { + k_best = k_best_t; + x_best = x_best_t; + } + + k_best /= 1000; + +#if defined(CONFIG_MX23) + writeb(CLKCTRL_FRAC_CLKGATE, + &clkctrl_regs->hw_clkctrl_frac0_set[CLKCTRL_FRAC0_PIX]); + writeb(CLKCTRL_FRAC_CLKGATE | (x_best & CLKCTRL_FRAC_FRAC_MASK), + &clkctrl_regs->hw_clkctrl_frac0[CLKCTRL_FRAC0_PIX]); + writeb(CLKCTRL_FRAC_CLKGATE, + &clkctrl_regs->hw_clkctrl_frac0_clr[CLKCTRL_FRAC0_PIX]); + + writel(CLKCTRL_PIX_CLKGATE, + &clkctrl_regs->hw_clkctrl_pix_set); + clrsetbits_le32(&clkctrl_regs->hw_clkctrl_pix, + CLKCTRL_PIX_DIV_MASK | CLKCTRL_PIX_CLKGATE, + k_best << CLKCTRL_PIX_DIV_OFFSET); + + while (readl(&clkctrl_regs->hw_clkctrl_pix) & CLKCTRL_PIX_BUSY) + ; +#elif defined(CONFIG_MX28) + writeb(CLKCTRL_FRAC_CLKGATE, + &clkctrl_regs->hw_clkctrl_frac1_set[CLKCTRL_FRAC1_PIX]); + writeb(CLKCTRL_FRAC_CLKGATE | (x_best & CLKCTRL_FRAC_FRAC_MASK), + &clkctrl_regs->hw_clkctrl_frac1[CLKCTRL_FRAC1_PIX]); + writeb(CLKCTRL_FRAC_CLKGATE, + &clkctrl_regs->hw_clkctrl_frac1_clr[CLKCTRL_FRAC1_PIX]); + + writel(CLKCTRL_DIS_LCDIF_CLKGATE, + &clkctrl_regs->hw_clkctrl_lcdif_set); + clrsetbits_le32(&clkctrl_regs->hw_clkctrl_lcdif, + CLKCTRL_DIS_LCDIF_DIV_MASK | CLKCTRL_DIS_LCDIF_CLKGATE, + k_best << CLKCTRL_DIS_LCDIF_DIV_OFFSET); + + while (readl(&clkctrl_regs->hw_clkctrl_lcdif) & CLKCTRL_DIS_LCDIF_BUSY) + ; +#endif +} + uint32_t mxc_get_clock(enum mxc_clock clk) { switch (clk) { diff --git a/arch/arm/cpu/arm926ejs/mxs/mxs.c b/arch/arm/cpu/arm926ejs/mxs/mxs.c index e2b4196..a5e388b 100644 --- a/arch/arm/cpu/arm926ejs/mxs/mxs.c +++ b/arch/arm/cpu/arm926ejs/mxs/mxs.c @@ -30,7 +30,7 @@ #include <asm/errno.h> #include <asm/io.h> #include <asm/arch/clock.h> -#include <asm/arch/dma.h> +#include <asm/imx-common/dma.h> #include <asm/arch/gpio.h> #include <asm/arch/iomux.h> #include <asm/arch/imx-regs.h> @@ -39,12 +39,6 @@ DECLARE_GLOBAL_DATA_PTR; -/* 1 second delay should be plenty of time for block reset. */ -#define RESET_MAX_TIMEOUT 1000000 - -#define MXS_BLOCK_SFTRST (1 << 31) -#define MXS_BLOCK_CLKGATE (1 << 30) - /* Lowlevel init isn't used on i.MX28, so just have a dummy here */ inline void lowlevel_init(void) {} @@ -82,63 +76,6 @@ void enable_caches(void) #endif } -int mxs_wait_mask_set(struct mxs_register_32 *reg, uint32_t mask, unsigned - int timeout) -{ - while (--timeout) { - if ((readl(®->reg) & mask) == mask) - break; - udelay(1); - } - - return !timeout; -} - -int mxs_wait_mask_clr(struct mxs_register_32 *reg, uint32_t mask, unsigned - int timeout) -{ - while (--timeout) { - if ((readl(®->reg) & mask) == 0) - break; - udelay(1); - } - - return !timeout; -} - -int mxs_reset_block(struct mxs_register_32 *reg) -{ - /* Clear SFTRST */ - writel(MXS_BLOCK_SFTRST, ®->reg_clr); - - if (mxs_wait_mask_clr(reg, MXS_BLOCK_SFTRST, RESET_MAX_TIMEOUT)) - return 1; - - /* Clear CLKGATE */ - writel(MXS_BLOCK_CLKGATE, ®->reg_clr); - - /* Set SFTRST */ - writel(MXS_BLOCK_SFTRST, ®->reg_set); - - /* Wait for CLKGATE being set */ - if (mxs_wait_mask_set(reg, MXS_BLOCK_CLKGATE, RESET_MAX_TIMEOUT)) - return 1; - - /* Clear SFTRST */ - writel(MXS_BLOCK_SFTRST, ®->reg_clr); - - if (mxs_wait_mask_clr(reg, MXS_BLOCK_SFTRST, RESET_MAX_TIMEOUT)) - return 1; - - /* Clear CLKGATE */ - writel(MXS_BLOCK_CLKGATE, ®->reg_clr); - - if (mxs_wait_mask_clr(reg, MXS_BLOCK_CLKGATE, RESET_MAX_TIMEOUT)) - return 1; - - return 0; -} - void mx28_fixup_vt(uint32_t start_addr) { uint32_t *vt = (uint32_t *)0x20; diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c index bc2d69c..07db279 100644 --- a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c @@ -110,6 +110,7 @@ __weak void mxs_adjust_memory_params(uint32_t *dram_vals) { } +#ifdef CONFIG_MX28 static void initialize_dram_values(void) { int i; @@ -118,15 +119,36 @@ static void initialize_dram_values(void) for (i = 0; i < ARRAY_SIZE(dram_vals); i++) writel(dram_vals[i], MXS_DRAM_BASE + (4 * i)); +} +#else +static void initialize_dram_values(void) +{ + int i; + + mxs_adjust_memory_params(dram_vals); + + /* + * HW_DRAM_CTL27, HW_DRAM_CTL28 and HW_DRAM_CTL35 are not initialized as + * per FSL bootlets code. + * + * mx23 Reference Manual marks HW_DRAM_CTL27 and HW_DRAM_CTL28 as + * "reserved". + * HW_DRAM_CTL8 is setup as the last element. + * So skip the initialization of these HW_DRAM_CTL registers. + */ + for (i = 0; i < ARRAY_SIZE(dram_vals); i++) { + if (i == 8 || i == 27 || i == 28 || i == 35) + continue; + writel(dram_vals[i], MXS_DRAM_BASE + (4 * i)); + } -#ifdef CONFIG_MX23 /* * Enable tRAS lockout in HW_DRAM_CTL08 ; it must be the last * element to be set */ writel((1 << 24), MXS_DRAM_BASE + (4 * 8)); -#endif } +#endif static void mxs_mem_init_clock(void) { @@ -234,17 +256,9 @@ static void mx23_mem_setup_vddmem(void) struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; - writel((0x10 << POWER_VDDMEMCTRL_TRG_OFFSET) | - POWER_VDDMEMCTRL_ENABLE_ILIMIT | - POWER_VDDMEMCTRL_ENABLE_LINREG | - POWER_VDDMEMCTRL_PULLDOWN_ACTIVE, - &power_regs->hw_power_vddmemctrl); + clrbits_le32(&power_regs->hw_power_vddmemctrl, + POWER_VDDMEMCTRL_ENABLE_ILIMIT); - early_delay(10000); - - writel((0x10 << POWER_VDDMEMCTRL_TRG_OFFSET) | - POWER_VDDMEMCTRL_ENABLE_LINREG, - &power_regs->hw_power_vddmemctrl); } static void mx23_mem_init(void) @@ -267,22 +281,18 @@ static void mx23_mem_init(void) initialize_dram_values(); - /* Set START bit in DRAM_CTL16 */ + /* Set START bit in DRAM_CTL8 */ setbits_le32(MXS_DRAM_BASE + 0x20, 1 << 16); clrbits_le32(MXS_DRAM_BASE + 0x40, 1 << 17); early_delay(20000); /* Adjust EMI port priority. */ - clrsetbits_le32(0x80020000, 0x1f << 16, 0x8); + clrsetbits_le32(0x80020000, 0x1f << 16, 0x2); early_delay(20000); setbits_le32(MXS_DRAM_BASE + 0x40, 1 << 19); setbits_le32(MXS_DRAM_BASE + 0x40, 1 << 11); - - /* Wait for bit 10 (DRAM init complete) in DRAM_CTL18 */ - while (!(readl(MXS_DRAM_BASE + 0x48) & (1 << 10))) - ; } #endif diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c index 287c698..21cac7b 100644 --- a/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c @@ -687,6 +687,12 @@ static void mxs_power_configure_power_source(void) mxs_init_batt_bo(); mxs_switch_vddd_to_dcdc_source(); + +#ifdef CONFIG_MX23 + /* Fire up the VDDMEM LinReg now that we're all set. */ + writel(POWER_VDDMEMCTRL_ENABLE_LINREG | POWER_VDDMEMCTRL_ENABLE_ILIMIT, + &power_regs->hw_power_vddmemctrl); +#endif } static void mxs_enable_output_rail_protection(void) @@ -781,7 +787,11 @@ struct mxs_vddx_cfg { static const struct mxs_vddx_cfg mxs_vddio_cfg = { .reg = &(((struct mxs_power_regs *)MXS_POWER_BASE)-> hw_power_vddioctrl), +#if defined(CONFIG_MX23) + .step_mV = 25, +#else .step_mV = 50, +#endif .lowest_mV = 2800, .powered_by_linreg = mxs_get_vddio_power_source_off, .trg_mask = POWER_VDDIOCTRL_TRG_MASK, @@ -804,6 +814,21 @@ static const struct mxs_vddx_cfg mxs_vddd_cfg = { .bo_offset_offset = POWER_VDDDCTRL_BO_OFFSET_OFFSET, }; +#ifdef CONFIG_MX23 +static const struct mxs_vddx_cfg mxs_vddmem_cfg = { + .reg = &(((struct mxs_power_regs *)MXS_POWER_BASE)-> + hw_power_vddmemctrl), + .step_mV = 50, + .lowest_mV = 1700, + .powered_by_linreg = NULL, + .trg_mask = POWER_VDDMEMCTRL_TRG_MASK, + .bo_irq = 0, + .bo_enirq = 0, + .bo_offset_mask = 0, + .bo_offset_offset = 0, +}; +#endif + static void mxs_power_set_vddx(const struct mxs_vddx_cfg *cfg, uint32_t new_target, uint32_t new_brownout) { @@ -821,9 +846,10 @@ static void mxs_power_set_vddx(const struct mxs_vddx_cfg *cfg, cur_target += cfg->lowest_mV; adjust_up = new_target > cur_target; - powered_by_linreg = cfg->powered_by_linreg(); + if (cfg->powered_by_linreg) + powered_by_linreg = cfg->powered_by_linreg(); - if (adjust_up) { + if (adjust_up && cfg->bo_irq) { if (powered_by_linreg) { bo_int = readl(cfg->reg); clrbits_le32(cfg->reg, cfg->bo_enirq); @@ -864,14 +890,16 @@ static void mxs_power_set_vddx(const struct mxs_vddx_cfg *cfg, cur_target += cfg->lowest_mV; } while (new_target > cur_target); - if (adjust_up && powered_by_linreg) { - writel(cfg->bo_irq, &power_regs->hw_power_ctrl_clr); - if (bo_int & cfg->bo_enirq) - setbits_le32(cfg->reg, cfg->bo_enirq); - } + if (cfg->bo_irq) { + if (adjust_up && powered_by_linreg) { + writel(cfg->bo_irq, &power_regs->hw_power_ctrl_clr); + if (bo_int & cfg->bo_enirq) + setbits_le32(cfg->reg, cfg->bo_enirq); + } - clrsetbits_le32(cfg->reg, cfg->bo_offset_mask, - new_brownout << cfg->bo_offset_offset); + clrsetbits_le32(cfg->reg, cfg->bo_offset_mask, + new_brownout << cfg->bo_offset_offset); + } } static void mxs_setup_batt_detect(void) @@ -910,7 +938,9 @@ void mxs_power_init(void) mxs_power_set_vddx(&mxs_vddio_cfg, 3300, 3150); mxs_power_set_vddx(&mxs_vddd_cfg, 1500, 1000); - +#ifdef CONFIG_MX23 + mxs_power_set_vddx(&mxs_vddmem_cfg, 2500, 1700); +#endif writel(POWER_CTRL_VDDD_BO_IRQ | POWER_CTRL_VDDA_BO_IRQ | POWER_CTRL_VDDIO_BO_IRQ | POWER_CTRL_VDD5V_DROOP_IRQ | POWER_CTRL_VBUS_VALID_IRQ | POWER_CTRL_BATT_BO_IRQ | diff --git a/arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd b/arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd index 3a51879..8b6c30e 100644 --- a/arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd +++ b/arch/arm/cpu/arm926ejs/mxs/u-boot-imx23.bd @@ -4,8 +4,8 @@ options { } sources { - u_boot_spl="spl/u-boot-spl.bin"; - u_boot="u-boot.bin"; + u_boot_spl="OBJTREE/spl/u-boot-spl.bin"; + u_boot="OBJTREE/u-boot.bin"; } section (0) { diff --git a/arch/arm/cpu/arm926ejs/mxs/u-boot-imx28.bd b/arch/arm/cpu/arm926ejs/mxs/u-boot-imx28.bd index c60615a..a5fa648 100644 --- a/arch/arm/cpu/arm926ejs/mxs/u-boot-imx28.bd +++ b/arch/arm/cpu/arm926ejs/mxs/u-boot-imx28.bd @@ -1,6 +1,6 @@ sources { - u_boot_spl="spl/u-boot-spl.bin"; - u_boot="u-boot.bin"; + u_boot_spl="OBJTREE/spl/u-boot-spl.bin"; + u_boot="OBJTREE/u-boot.bin"; } section (0) { diff --git a/arch/arm/cpu/armv7/am33xx/clock_ti814x.c b/arch/arm/cpu/armv7/am33xx/clock_ti814x.c index cb4210f..8b2878d 100644 --- a/arch/arm/cpu/armv7/am33xx/clock_ti814x.c +++ b/arch/arm/cpu/armv7/am33xx/clock_ti814x.c @@ -109,6 +109,8 @@ struct ad_pll { #define OSC_SRC_CTRL (PLL_SUBSYS_BASE + 0x2C0) /* PRCM */ +#define ENET_CLKCTRL_CMPL 0x30000 + #define CM_DEFAULT_BASE (PRCM_BASE + 0x0500) struct cm_def { @@ -183,7 +185,7 @@ struct cm_alwon { unsigned int resv5[2]; unsigned int gpmcclkctrl; unsigned int ethernet0clkctrl; - unsigned int resv6[1]; + unsigned int ethernet1clkctrl; unsigned int mpuclkctrl; unsigned int debugssclkctrl; unsigned int l3clkctrl; @@ -203,9 +205,67 @@ struct cm_alwon { unsigned int custefuseclkctrl; }; +#define SATA_PLL_BASE (CTRL_BASE + 0x0720) + +struct sata_pll { + unsigned int pllcfg0; + unsigned int pllcfg1; + unsigned int pllcfg2; + unsigned int pllcfg3; + unsigned int pllcfg4; + unsigned int pllstatus; + unsigned int rxstatus; + unsigned int txstatus; + unsigned int testcfg; +}; + +#define SEL_IN_FREQ (0x1 << 31) +#define DIGCLRZ (0x1 << 30) +#define ENDIGLDO (0x1 << 4) +#define APLL_CP_CURR (0x1 << 3) +#define ENBGSC_REF (0x1 << 2) +#define ENPLLLDO (0x1 << 1) +#define ENPLL (0x1 << 0) + +#define SATA_PLLCFG0_1 (SEL_IN_FREQ | ENBGSC_REF) +#define SATA_PLLCFG0_2 (SEL_IN_FREQ | ENDIGLDO | ENBGSC_REF) +#define SATA_PLLCFG0_3 (SEL_IN_FREQ | ENDIGLDO | ENBGSC_REF | ENPLLLDO) +#define SATA_PLLCFG0_4 (SEL_IN_FREQ | DIGCLRZ | ENDIGLDO | ENBGSC_REF | \ + ENPLLLDO | ENPLL) + +#define PLL_LOCK (0x1 << 0) + +#define ENSATAMODE (0x1 << 31) +#define PLLREFSEL (0x1 << 30) +#define MDIVINT (0x4b << 18) +#define EN_CLKAUX (0x1 << 5) +#define EN_CLK125M (0x1 << 4) +#define EN_CLK100M (0x1 << 3) +#define EN_CLK50M (0x1 << 2) + +#define SATA_PLLCFG1 (ENSATAMODE | \ + PLLREFSEL | \ + MDIVINT | \ + EN_CLKAUX | \ + EN_CLK125M | \ + EN_CLK100M | \ + EN_CLK50M) + +#define DIGLDO_EN_CAPLESSMODE (0x1 << 22) +#define PLLDO_EN_LDO_STABLE (0x1 << 11) +#define PLLDO_EN_BUF_CUR (0x1 << 7) +#define PLLDO_EN_LP (0x1 << 6) +#define PLLDO_CTRL_TRIM_1_4V (0x10 << 1) + +#define SATA_PLLCFG3 (DIGLDO_EN_CAPLESSMODE | \ + PLLDO_EN_LDO_STABLE | \ + PLLDO_EN_BUF_CUR | \ + PLLDO_EN_LP | \ + PLLDO_CTRL_TRIM_1_4V) const struct cm_alwon *cmalwon = (struct cm_alwon *)CM_ALWON_BASE; const struct cm_def *cmdef = (struct cm_def *)CM_DEFAULT_BASE; +const struct sata_pll *spll = (struct sata_pll *)SATA_PLL_BASE; /* * Enable the peripheral clock for required peripherals @@ -221,6 +281,15 @@ static void enable_per_clocks(void) writel(PRCM_MOD_EN, &cmalwon->mmchs1clkctrl); while (readl(&cmalwon->mmchs1clkctrl) != PRCM_MOD_EN) ; + + /* Ethernet */ + writel(PRCM_MOD_EN, &cmalwon->ethclkstctrl); + writel(PRCM_MOD_EN, &cmalwon->ethernet0clkctrl); + while ((readl(&cmalwon->ethernet0clkctrl) & ENET_CLKCTRL_CMPL) != 0) + ; + writel(PRCM_MOD_EN, &cmalwon->ethernet1clkctrl); + while ((readl(&cmalwon->ethernet1clkctrl) & ENET_CLKCTRL_CMPL) != 0) + ; } /* @@ -365,6 +434,35 @@ void ddr_pll_config(unsigned int ddrpll_m) pll_config(DDR_PLL_BASE, DDR_N, DDR_M, DDR_M2, DDR_CLKCTRL, 1); } +void sata_pll_config(void) +{ + /* + * This sequence for configuring the SATA PLL + * resident in the control module is documented + * in TI8148 TRM section 21.3.1 + */ + writel(SATA_PLLCFG1, &spll->pllcfg1); + udelay(50); + + writel(SATA_PLLCFG3, &spll->pllcfg3); + udelay(50); + + writel(SATA_PLLCFG0_1, &spll->pllcfg0); + udelay(50); + + writel(SATA_PLLCFG0_2, &spll->pllcfg0); + udelay(50); + + writel(SATA_PLLCFG0_3, &spll->pllcfg0); + udelay(50); + + writel(SATA_PLLCFG0_4, &spll->pllcfg0); + udelay(50); + + while (((readl(&spll->pllstatus) & PLL_LOCK) == 0)) + ; +} + void enable_emif_clocks(void) {}; void enable_dmm_clocks(void) @@ -397,9 +495,10 @@ void pll_init() /* Enable the control module */ writel(PRCM_MOD_EN, &cmalwon->controlclkctrl); + /* Configure PLLs */ mpu_pll_config(); - l3_pll_config(); + sata_pll_config(); /* Enable the required peripherals */ enable_per_clocks(); diff --git a/arch/arm/cpu/armv7/am33xx/sys_info.c b/arch/arm/cpu/armv7/am33xx/sys_info.c index 5fd8b47..ac049ac 100644 --- a/arch/arm/cpu/armv7/am33xx/sys_info.c +++ b/arch/arm/cpu/armv7/am33xx/sys_info.c @@ -92,7 +92,6 @@ u32 get_sysboot_value(void) int print_cpuinfo(void) { char *cpu_s, *sec_s; - int arm_freq, ddr_freq; switch (get_cpu_type()) { case AM335X: @@ -123,10 +122,7 @@ int print_cpuinfo(void) sec_s = "?"; } - printf("%s-%s rev %d\n", - cpu_s, sec_s, get_cpu_rev()); - - /* TODO: Print ARM and DDR frequencies */ + printf("%s-%s rev %d\n", cpu_s, sec_s, get_cpu_rev()); return 0; } diff --git a/arch/arm/cpu/armv7/at91/Makefile b/arch/arm/cpu/armv7/at91/Makefile new file mode 100644 index 0000000..040c67d --- /dev/null +++ b/arch/arm/cpu/armv7/at91/Makefile @@ -0,0 +1,52 @@ +# +# (C) Copyright 2000-2008 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2013 +# Bo Shen <voice.shen@atmel.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).o + +COBJS-$(CONFIG_SAMA5D3) += sama5d3_devices.o +COBJS-y += clock.o +COBJS-y += cpu.o +COBJS-y += reset.o +COBJS-y += timer.o + +SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/arm/cpu/armv7/at91/clock.c b/arch/arm/cpu/armv7/at91/clock.c new file mode 100644 index 0000000..624b52c --- /dev/null +++ b/arch/arm/cpu/armv7/at91/clock.c @@ -0,0 +1,125 @@ +/* + * [origin: Linux kernel linux/arch/arm/mach-at91/clock.c] + * + * Copyright (C) 2005 David Brownell + * Copyright (C) 2005 Ivan Kokshaysky + * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * Copyright (C) 2013 Bo Shen <voice.shen@atmel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/hardware.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/clk.h> + +#if !defined(CONFIG_AT91FAMILY) +# error You need to define CONFIG_AT91FAMILY in your board config! +#endif + +DECLARE_GLOBAL_DATA_PTR; + +static unsigned long at91_css_to_rate(unsigned long css) +{ + switch (css) { + case AT91_PMC_MCKR_CSS_SLOW: + return CONFIG_SYS_AT91_SLOW_CLOCK; + case AT91_PMC_MCKR_CSS_MAIN: + return gd->arch.main_clk_rate_hz; + case AT91_PMC_MCKR_CSS_PLLA: + return gd->arch.plla_rate_hz; + } + + return 0; +} + +static u32 at91_pll_rate(u32 freq, u32 reg) +{ + unsigned mul, div; + + div = reg & 0xff; + mul = (reg >> 18) & 0x7f; + if (div && mul) { + freq /= div; + freq *= mul + 1; + } else { + freq = 0; + } + + return freq; +} + +int at91_clock_init(unsigned long main_clock) +{ + unsigned freq, mckr; + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; +#ifndef CONFIG_SYS_AT91_MAIN_CLOCK + unsigned tmp; + /* + * When the bootloader initialized the main oscillator correctly, + * there's no problem using the cycle counter. But if it didn't, + * or when using oscillator bypass mode, we must be told the speed + * of the main clock. + */ + if (!main_clock) { + do { + tmp = readl(&pmc->mcfr); + } while (!(tmp & AT91_PMC_MCFR_MAINRDY)); + tmp &= AT91_PMC_MCFR_MAINF_MASK; + main_clock = tmp * (CONFIG_SYS_AT91_SLOW_CLOCK / 16); + } +#endif + gd->arch.main_clk_rate_hz = main_clock; + + /* report if PLLA is more than mildly overclocked */ + gd->arch.plla_rate_hz = at91_pll_rate(main_clock, readl(&pmc->pllar)); + + /* + * MCK and CPU derive from one of those primary clocks. + * For now, assume this parentage won't change. + */ + mckr = readl(&pmc->mckr); + + /* plla divisor by 2 */ + if (mckr & (1 << 12)) + gd->arch.plla_rate_hz >>= 1; + + gd->arch.mck_rate_hz = at91_css_to_rate(mckr & AT91_PMC_MCKR_CSS_MASK); + freq = gd->arch.mck_rate_hz; + + /* prescale */ + freq >>= mckr & AT91_PMC_MCKR_PRES_MASK; + + switch (mckr & AT91_PMC_MCKR_MDIV_MASK) { + case AT91_PMC_MCKR_MDIV_2: + gd->arch.mck_rate_hz = freq / 2; + break; + case AT91_PMC_MCKR_MDIV_3: + gd->arch.mck_rate_hz = freq / 3; + break; + case AT91_PMC_MCKR_MDIV_4: + gd->arch.mck_rate_hz = freq / 4; + break; + default: + break; + } + + gd->arch.cpu_clk_rate_hz = freq; + + return 0; +} + +void at91_periph_clk_enable(int id) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + + if (id > 31) + writel(1 << (id - 32), &pmc->pcer1); + else + writel(1 << id, &pmc->pcer); +} diff --git a/arch/arm/cpu/armv7/at91/cpu.c b/arch/arm/cpu/armv7/at91/cpu.c new file mode 100644 index 0000000..3df6143 --- /dev/null +++ b/arch/arm/cpu/armv7/at91/cpu.c @@ -0,0 +1,90 @@ +/* + * (C) Copyright 2010 + * Reinhard Meyer, reinhard.meyer@emk-elektronik.de + * (C) Copyright 2009 + * Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * (C) Copyright 2013 + * Bo Shen <voice.shen@atmel.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/hardware.h> +#include <asm/arch/at91_dbu.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/at91_pit.h> +#include <asm/arch/at91_gpbr.h> +#include <asm/arch/clk.h> + +#ifndef CONFIG_SYS_AT91_MAIN_CLOCK +#define CONFIG_SYS_AT91_MAIN_CLOCK 0 +#endif + +int arch_cpu_init(void) +{ + return at91_clock_init(CONFIG_SYS_AT91_MAIN_CLOCK); +} + +void arch_preboot_os(void) +{ + ulong cpiv; + at91_pit_t *pit = (at91_pit_t *)ATMEL_BASE_PIT; + + cpiv = AT91_PIT_MR_PIV_MASK(readl(&pit->piir)); + + /* + * Disable PITC + * Add 0x1000 to current counter to stop it faster + * without waiting for wrapping back to 0 + */ + writel(cpiv + 0x1000, &pit->mr); +} + +#if defined(CONFIG_DISPLAY_CPUINFO) +int print_cpuinfo(void) +{ + char buf[32]; + + printf("CPU: %s\n", get_cpu_name()); + printf("Crystal frequency: %8s MHz\n", + strmhz(buf, get_main_clk_rate())); + printf("CPU clock : %8s MHz\n", + strmhz(buf, get_cpu_clk_rate())); + printf("Master clock : %8s MHz\n", + strmhz(buf, get_mck_clk_rate())); + + return 0; +} +#endif + +void enable_caches(void) +{ +} + +unsigned int get_chip_id(void) +{ + return readl(ATMEL_BASE_DBGU + AT91_DBU_CIDR) & ~AT91_DBU_CIDR_MASK; +} + +unsigned int get_extension_chip_id(void) +{ + return readl(ATMEL_BASE_DBGU + AT91_DBU_EXID); +} diff --git a/arch/arm/cpu/armv7/at91/reset.c b/arch/arm/cpu/armv7/at91/reset.c new file mode 100644 index 0000000..b9f83d9 --- /dev/null +++ b/arch/arm/cpu/armv7/at91/reset.c @@ -0,0 +1,47 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian@popies.net> + * Lead Tech Design <www.leadtechdesign.com> + * + * (C) Copyright 2013 + * Bo Shen <voice.shen@atmel.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/hardware.h> +#include <asm/arch/at91_rstc.h> + +/* Reset the cpu by telling the reset controller to do so */ +void reset_cpu(ulong ignored) +{ + at91_rstc_t *rstc = (at91_rstc_t *)ATMEL_BASE_RSTC; + + writel(AT91_RSTC_KEY + | AT91_RSTC_CR_PROCRST /* Processor Reset */ + | AT91_RSTC_CR_PERRST /* Peripheral Reset */ +#ifdef CONFIG_AT91RESET_EXTRST + | AT91_RSTC_CR_EXTRST /* External Reset (assert nRST pin) */ +#endif + , &rstc->cr); + /* never reached */ + do { } while (1); +} diff --git a/arch/arm/cpu/armv7/at91/sama5d3_devices.c b/arch/arm/cpu/armv7/at91/sama5d3_devices.c new file mode 100644 index 0000000..acf8b43 --- /dev/null +++ b/arch/arm/cpu/armv7/at91/sama5d3_devices.c @@ -0,0 +1,196 @@ +/* + * Copyright (C) 2012-2013 Atmel Corporation + * Bo Shen <voice.shen@atmel.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/sama5d3.h> +#include <asm/arch/at91_common.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/clk.h> +#include <asm/arch/gpio.h> +#include <asm/io.h> + +unsigned int has_emac() +{ + return cpu_is_sama5d31() || cpu_is_sama5d35(); +} + +unsigned int has_gmac() +{ + return !cpu_is_sama5d31(); +} + +unsigned int has_lcdc() +{ + return !cpu_is_sama5d35(); +} + +char *get_cpu_name() +{ + unsigned int extension_id = get_extension_chip_id(); + + if (cpu_is_sama5d3()) + switch (extension_id) { + case ARCH_EXID_SAMA5D31: + return "SAMA5D31"; + case ARCH_EXID_SAMA5D33: + return "SAMA5D33"; + case ARCH_EXID_SAMA5D34: + return "SAMA5D34"; + case ARCH_EXID_SAMA5D35: + return "SAMA5D35"; + default: + return "Unknown CPU type"; + } + else + return "Unknown CPU type"; +} + +void at91_serial0_hw_init(void) +{ + at91_set_a_periph(AT91_PIO_PORTD, 18, 1); /* TXD0 */ + at91_set_a_periph(AT91_PIO_PORTD, 17, 0); /* RXD0 */ + + /* Enable clock */ + at91_periph_clk_enable(ATMEL_ID_USART0); +} + +void at91_serial1_hw_init(void) +{ + at91_set_a_periph(AT91_PIO_PORTB, 29, 1); /* TXD1 */ + at91_set_a_periph(AT91_PIO_PORTB, 28, 0); /* RXD1 */ + + /* Enable clock */ + at91_periph_clk_enable(ATMEL_ID_USART1); +} + +void at91_serial2_hw_init(void) +{ + at91_set_b_periph(AT91_PIO_PORTE, 26, 1); /* TXD2 */ + at91_set_b_periph(AT91_PIO_PORTE, 25, 0); /* RXD2 */ + + /* Enable clock */ + at91_periph_clk_enable(ATMEL_ID_USART2); +} + +void at91_seriald_hw_init(void) +{ + at91_set_a_periph(AT91_PIO_PORTB, 31, 1); /* DTXD */ + at91_set_a_periph(AT91_PIO_PORTB, 30, 0); /* DRXD */ + + /* Enable clock */ + at91_periph_clk_enable(ATMEL_ID_SYS); +} + +#if defined(CONFIG_ATMEL_SPI) +void at91_spi0_hw_init(unsigned long cs_mask) +{ + at91_set_a_periph(AT91_PIO_PORTD, 10, 0); /* SPI0_MISO */ + at91_set_a_periph(AT91_PIO_PORTD, 11, 0); /* SPI0_MOSI */ + at91_set_a_periph(AT91_PIO_PORTD, 12, 0); /* SPI0_SPCK */ + + if (cs_mask & (1 << 0)) + at91_set_pio_output(AT91_PIO_PORTD, 13, 1); + if (cs_mask & (1 << 1)) + at91_set_pio_output(AT91_PIO_PORTD, 14, 1); + if (cs_mask & (1 << 2)) + at91_set_pio_output(AT91_PIO_PORTD, 15, 1); + if (cs_mask & (1 << 3)) + at91_set_pio_output(AT91_PIO_PORTD, 16, 1); + + /* Enable clock */ + at91_periph_clk_enable(ATMEL_ID_SPI0); +} +#endif + +#ifdef CONFIG_GENERIC_ATMEL_MCI +void at91_mci_hw_init(void) +{ + at91_set_a_periph(AT91_PIO_PORTD, 0, 0); /* MCI0 CMD */ + at91_set_a_periph(AT91_PIO_PORTD, 1, 0); /* MCI0 DA0 */ + at91_set_a_periph(AT91_PIO_PORTD, 2, 0); /* MCI0 DA1 */ + at91_set_a_periph(AT91_PIO_PORTD, 3, 0); /* MCI0 DA2 */ + at91_set_a_periph(AT91_PIO_PORTD, 4, 0); /* MCI0 DA3 */ +#ifdef CONFIG_ATMEL_MCI_8BIT + at91_set_a_periph(AT91_PIO_PORTD, 5, 0); /* MCI0 DA4 */ + at91_set_a_periph(AT91_PIO_PORTD, 6, 0); /* MCI0 DA5 */ + at91_set_a_periph(AT91_PIO_PORTD, 7, 0); /* MCI0 DA6 */ + at91_set_a_periph(AT91_PIO_PORTD, 8, 0); /* MCI0 DA7 */ +#endif + at91_set_a_periph(AT91_PIO_PORTD, 9, 0); /* MCI0 CLK */ + + /* Enable clock */ + at91_periph_clk_enable(ATMEL_ID_MCI0); +} +#endif + +#ifdef CONFIG_MACB +void at91_macb_hw_init(void) +{ + at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* ETXCK_EREFCK */ + at91_set_a_periph(AT91_PIO_PORTC, 5, 0); /* ERXDV */ + at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* ERX0 */ + at91_set_a_periph(AT91_PIO_PORTC, 3, 0); /* ERX1 */ + at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* ERXER */ + at91_set_a_periph(AT91_PIO_PORTC, 4, 0); /* ETXEN */ + at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* ETX0 */ + at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* ETX1 */ + at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* EMDIO */ + at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* EMDC */ + + /* Enable clock */ + at91_periph_clk_enable(ATMEL_ID_EMAC); +} +#endif + +#ifdef CONFIG_LCD +void at91_lcd_hw_init(void) +{ + at91_set_a_periph(AT91_PIO_PORTA, 24, 0); /* LCDPWM */ + at91_set_a_periph(AT91_PIO_PORTA, 25, 0); /* LCDDISP */ + at91_set_a_periph(AT91_PIO_PORTA, 26, 0); /* LCDVSYNC */ + at91_set_a_periph(AT91_PIO_PORTA, 27, 0); /* LCDHSYNC */ + at91_set_a_periph(AT91_PIO_PORTA, 28, 0); /* LCDDOTCK */ + at91_set_a_periph(AT91_PIO_PORTA, 29, 0); /* LCDDEN */ + + /* The lower 16-bit of LCD only available on Port A */ + at91_set_a_periph(AT91_PIO_PORTA, 0, 0); /* LCDD0 */ + at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* LCDD1 */ + at91_set_a_periph(AT91_PIO_PORTA, 2, 0); /* LCDD2 */ + at91_set_a_periph(AT91_PIO_PORTA, 3, 0); /* LCDD3 */ + at91_set_a_periph(AT91_PIO_PORTA, 4, 0); /* LCDD4 */ + at91_set_a_periph(AT91_PIO_PORTA, 5, 0); /* LCDD5 */ + at91_set_a_periph(AT91_PIO_PORTA, 6, 0); /* LCDD6 */ + at91_set_a_periph(AT91_PIO_PORTA, 7, 0); /* LCDD7 */ + at91_set_a_periph(AT91_PIO_PORTA, 8, 0); /* LCDD8 */ + at91_set_a_periph(AT91_PIO_PORTA, 9, 0); /* LCDD9 */ + at91_set_a_periph(AT91_PIO_PORTA, 10, 0); /* LCDD10 */ + at91_set_a_periph(AT91_PIO_PORTA, 11, 0); /* LCDD11 */ + at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* LCDD12 */ + at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* LCDD13 */ + at91_set_a_periph(AT91_PIO_PORTA, 14, 0); /* LCDD14 */ + at91_set_a_periph(AT91_PIO_PORTA, 15, 0); /* LCDD15 */ + + /* Enable clock */ + at91_periph_clk_enable(ATMEL_ID_LCDC); +} +#endif diff --git a/arch/arm/cpu/armv7/at91/timer.c b/arch/arm/cpu/armv7/at91/timer.c new file mode 100644 index 0000000..b3a450f --- /dev/null +++ b/arch/arm/cpu/armv7/at91/timer.c @@ -0,0 +1,139 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian@popies.net> + * Lead Tech Design <www.leadtechdesign.com> + * + * (C) Copyright 2013 + * Bo Shen <voice.shen@atmel.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/hardware.h> +#include <asm/arch/at91_pit.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/clk.h> +#include <div64.h> + +#if !defined(CONFIG_AT91FAMILY) +# error You need to define CONFIG_AT91FAMILY in your board config! +#endif + +DECLARE_GLOBAL_DATA_PTR; + +/* + * We're using the SAMA5D3x PITC in 32 bit mode, by + * setting the 20 bit counter period to its maximum (0xfffff). + * (See the relevant data sheets to understand that this really works) + * + * We do also mimic the typical powerpc way of incrementing + * two 32 bit registers called tbl and tbu. + * + * Those registers increment at 1/16 the main clock rate. + */ + +#define TIMER_LOAD_VAL 0xfffff + +static inline unsigned long long tick_to_time(unsigned long long tick) +{ + tick *= CONFIG_SYS_HZ; + do_div(tick, gd->arch.timer_rate_hz); + + return tick; +} + +static inline unsigned long long usec_to_tick(unsigned long long usec) +{ + usec *= gd->arch.timer_rate_hz; + do_div(usec, 1000000); + + return usec; +} + +/* + * Use the PITC in full 32 bit incrementing mode + */ +int timer_init(void) +{ + at91_pit_t *pit = (at91_pit_t *)ATMEL_BASE_PIT; + + /* Enable PITC Clock */ + at91_periph_clk_enable(ATMEL_ID_SYS); + + /* Enable PITC */ + writel(TIMER_LOAD_VAL | AT91_PIT_MR_EN , &pit->mr); + + gd->arch.timer_rate_hz = gd->arch.mck_rate_hz / 16; + gd->arch.tbu = 0; + gd->arch.tbl = 0; + + return 0; +} + +/* + * Get the current 64 bit timer tick count + */ +unsigned long long get_ticks(void) +{ + at91_pit_t *pit = (at91_pit_t *)ATMEL_BASE_PIT; + + ulong now = readl(&pit->piir); + + /* increment tbu if tbl has rolled over */ + if (now < gd->arch.tbl) + gd->arch.tbu++; + gd->arch.tbl = now; + return (((unsigned long long)gd->arch.tbu) << 32) | gd->arch.tbl; +} + +void __udelay(unsigned long usec) +{ + unsigned long long start; + ulong tmo; + + start = get_ticks(); /* get current timestamp */ + tmo = usec_to_tick(usec); /* convert usecs to ticks */ + while ((get_ticks() - start) < tmo) + ; /* loop till time has passed */ +} + +/* + * get_timer(base) can be used to check for timeouts or + * to measure elasped time relative to an event: + * + * ulong start_time = get_timer(0) sets start_time to the current + * time value. + * get_timer(start_time) returns the time elapsed since then. + * + * The time is used in CONFIG_SYS_HZ units! + */ +ulong get_timer(ulong base) +{ + return tick_to_time(get_ticks()) - base; +} + +/* + * Return the number of timer ticks per second. + */ +ulong get_tbclk(void) +{ + return gd->arch.timer_rate_hz; +} diff --git a/arch/arm/cpu/armv7/lowlevel_init.S b/arch/arm/cpu/armv7/lowlevel_init.S index 0d45528..0a15aa4 100644 --- a/arch/arm/cpu/armv7/lowlevel_init.S +++ b/arch/arm/cpu/armv7/lowlevel_init.S @@ -37,7 +37,13 @@ ENTRY(lowlevel_init) */ ldr sp, =CONFIG_SYS_INIT_SP_ADDR bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - +#ifdef CONFIG_SPL_BUILD + ldr r8, =gdata +#else + sub sp, #GD_SIZE + bic sp, sp, #7 + mov r8, sp +#endif /* * Save the old lr(passed in ip) and the current lr to stack */ diff --git a/arch/arm/cpu/armv7/mx5/Makefile b/arch/arm/cpu/armv7/mx5/Makefile index ecd1184..e05fae9 100644 --- a/arch/arm/cpu/armv7/mx5/Makefile +++ b/arch/arm/cpu/armv7/mx5/Makefile @@ -27,7 +27,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).o -COBJS = soc.o clock.o iomux.o +COBJS = soc.o clock.o SOBJS = lowlevel_init.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/arch/arm/cpu/armv7/mx5/clock.c b/arch/arm/cpu/armv7/mx5/clock.c index 76c2c52..431756e 100644 --- a/arch/arm/cpu/armv7/mx5/clock.c +++ b/arch/arm/cpu/armv7/mx5/clock.c @@ -739,10 +739,11 @@ static int config_core_clk(u32 ref, u32 freq) static int config_nfc_clk(u32 nfc_clk) { u32 parent_rate = get_emi_slow_clk(); - u32 div = parent_rate / nfc_clk; + u32 div; - if (nfc_clk <= 0) + if (nfc_clk == 0) return -EINVAL; + div = parent_rate / nfc_clk; if (div == 0) div++; if (parent_rate / div > NFC_CLK_MAX) @@ -755,6 +756,15 @@ static int config_nfc_clk(u32 nfc_clk) return 0; } +void enable_nfc_clk(unsigned char enable) +{ + unsigned int cg = enable ? MXC_CCM_CCGR_CG_ON : MXC_CCM_CCGR_CG_OFF; + + clrsetbits_le32(&mxc_ccm->CCGR5, + MXC_CCM_CCGR5_EMI_ENFC(MXC_CCM_CCGR_CG_MASK), + MXC_CCM_CCGR5_EMI_ENFC(cg)); +} + /* Config main_bus_clock for periphs */ static int config_periph_clk(u32 ref, u32 freq) { diff --git a/arch/arm/cpu/armv7/mx5/iomux.c b/arch/arm/cpu/armv7/mx5/iomux.c deleted file mode 100644 index d4e3bbb..0000000 --- a/arch/arm/cpu/armv7/mx5/iomux.c +++ /dev/null @@ -1,186 +0,0 @@ -/* - * (C) Copyright 2009 Freescale Semiconductor, Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/imx-regs.h> -#include <asm/arch/mx5x_pins.h> -#include <asm/arch/iomux.h> -#include <asm/arch/sys_proto.h> - -/* IOMUX register (base) addresses */ -enum iomux_reg_addr { - IOMUXGPR0 = IOMUXC_BASE_ADDR, - IOMUXGPR1 = IOMUXC_BASE_ADDR + 0x004, - IOMUXSW_MUX_CTL = IOMUXC_BASE_ADDR, - IOMUXSW_MUX_END = IOMUXC_BASE_ADDR + MUX_I_END, - IOMUXSW_PAD_CTL = IOMUXC_BASE_ADDR + PAD_I_START, - IOMUXSW_INPUT_CTL = IOMUXC_BASE_ADDR + INPUT_CTL_START, -}; - -#define MUX_PIN_NUM_MAX (((MUX_I_END - MUX_I_START) >> 2) + 1) - -/* Get the iomux register address of this pin */ -static inline u32 get_mux_reg(iomux_pin_name_t pin) -{ - u32 mux_reg = PIN_TO_IOMUX_MUX(pin); - -#if defined(CONFIG_MX51) - if (is_soc_rev(CHIP_REV_2_0) < 0) { - /* - * Fixup register address: - * i.MX51 TO1 has offset with the register - * which is define as TO2. - */ - if ((pin == MX51_PIN_NANDF_RB5) || - (pin == MX51_PIN_NANDF_RB6) || - (pin == MX51_PIN_NANDF_RB7)) - ; /* Do nothing */ - else if (mux_reg >= 0x2FC) - mux_reg += 8; - else if (mux_reg >= 0x130) - mux_reg += 0xC; - } -#endif - mux_reg += IOMUXSW_MUX_CTL; - return mux_reg; -} - -/* Get the pad register address of this pin */ -static inline u32 get_pad_reg(iomux_pin_name_t pin) -{ - u32 pad_reg = PIN_TO_IOMUX_PAD(pin); - -#if defined(CONFIG_MX51) - if (is_soc_rev(CHIP_REV_2_0) < 0) { - /* - * Fixup register address: - * i.MX51 TO1 has offset with the register - * which is define as TO2. - */ - if ((pin == MX51_PIN_NANDF_RB5) || - (pin == MX51_PIN_NANDF_RB6) || - (pin == MX51_PIN_NANDF_RB7)) - ; /* Do nothing */ - else if (pad_reg == 0x4D0 - PAD_I_START) - pad_reg += 0x4C; - else if (pad_reg == 0x860 - PAD_I_START) - pad_reg += 0x9C; - else if (pad_reg >= 0x804 - PAD_I_START) - pad_reg += 0xB0; - else if (pad_reg >= 0x7FC - PAD_I_START) - pad_reg += 0xB4; - else if (pad_reg >= 0x4E4 - PAD_I_START) - pad_reg += 0xCC; - else - pad_reg += 8; - } -#endif - pad_reg += IOMUXSW_PAD_CTL; - return pad_reg; -} - -/* Get the last iomux register address */ -static inline u32 get_mux_end(void) -{ -#if defined(CONFIG_MX51) - if (is_soc_rev(CHIP_REV_2_0) < 0) - return IOMUXC_BASE_ADDR + (0x3F8 - 4); - else - return IOMUXC_BASE_ADDR + (0x3F0 - 4); -#endif - return IOMUXSW_MUX_END; -} - -/* - * This function is used to configure a pin through the IOMUX module. - * @param pin a pin number as defined in iomux_pin_name_t - * @param cfg an output function as defined in iomux_pin_cfg_t - * - * @return 0 if successful; Non-zero otherwise - */ -static void iomux_config_mux(iomux_pin_name_t pin, iomux_pin_cfg_t cfg) -{ - u32 mux_reg = get_mux_reg(pin); - - if ((mux_reg > get_mux_end()) || (mux_reg < IOMUXSW_MUX_CTL)) - return ; - if (cfg == IOMUX_CONFIG_GPIO) - writel(PIN_TO_ALT_GPIO(pin), mux_reg); - else - writel(cfg, mux_reg); -} - -/* - * Request ownership for an IO pin. This function has to be the first one - * being called before that pin is used. The caller has to check the - * return value to make sure it returns 0. - * - * @param pin a name defined by iomux_pin_name_t - * @param cfg an input function as defined in iomux_pin_cfg_t - * - */ -void mxc_request_iomux(iomux_pin_name_t pin, iomux_pin_cfg_t cfg) -{ - iomux_config_mux(pin, cfg); -} - -/* - * Release ownership for an IO pin - * - * @param pin a name defined by iomux_pin_name_t - * @param cfg an input function as defined in iomux_pin_cfg_t - */ -void mxc_free_iomux(iomux_pin_name_t pin, iomux_pin_cfg_t cfg) -{ -} - -/* - * This function configures the pad value for a IOMUX pin. - * - * @param pin a pin number as defined in iomux_pin_name_t - * @param config the ORed value of elements defined in iomux_pad_config_t - */ -void mxc_iomux_set_pad(iomux_pin_name_t pin, u32 config) -{ - u32 pad_reg = get_pad_reg(pin); - writel(config, pad_reg); -} - -unsigned int mxc_iomux_get_pad(iomux_pin_name_t pin) -{ - u32 pad_reg = get_pad_reg(pin); - return readl(pad_reg); -} - -/* - * This function configures daisy-chain - * - * @param input index of input select register - * @param config the binary value of elements - */ -void mxc_iomux_set_input(iomux_input_select_t input, u32 config) -{ - u32 reg = IOMUXSW_INPUT_CTL + (input << 2); - - writel(config, reg); -} diff --git a/arch/arm/cpu/armv7/mx5/soc.c b/arch/arm/cpu/armv7/mx5/soc.c index 263658a..3d50a5d 100644 --- a/arch/arm/cpu/armv7/mx5/soc.c +++ b/arch/arm/cpu/armv7/mx5/soc.c @@ -72,6 +72,13 @@ u32 get_cpu_rev(void) return system_rev; } +#ifdef CONFIG_REVISION_TAG +u32 __weak get_board_rev(void) +{ + return get_cpu_rev(); +} +#endif + #ifndef CONFIG_SYS_DCACHE_OFF void enable_caches(void) { diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c index a50db70..3c0d908 100644 --- a/arch/arm/cpu/armv7/mx6/clock.c +++ b/arch/arm/cpu/armv7/mx6/clock.c @@ -37,6 +37,20 @@ enum pll_clocks { struct mxc_ccm_reg *imx_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; +#ifdef CONFIG_MXC_OCOTP +void enable_ocotp_clk(unsigned char enable) +{ + u32 reg; + + reg = __raw_readl(&imx_ccm->CCGR2); + if (enable) + reg |= MXC_CCM_CCGR2_OCOTP_CTRL_MASK; + else + reg &= ~MXC_CCM_CCGR2_OCOTP_CTRL_MASK; + __raw_writel(reg, &imx_ccm->CCGR2); +} +#endif + void enable_usboh3_clk(unsigned char enable) { u32 reg; @@ -186,12 +200,16 @@ static u32 get_ipg_per_clk(void) static u32 get_uart_clk(void) { u32 reg, uart_podf; - + u32 freq = PLL3_80M; reg = __raw_readl(&imx_ccm->cscdr1); +#ifdef CONFIG_MX6SL + if (reg & MXC_CCM_CSCDR1_UART_CLK_SEL) + freq = MXC_HCLK; +#endif reg &= MXC_CCM_CSCDR1_UART_CLK_PODF_MASK; uart_podf = reg >> MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET; - return PLL3_80M / (uart_podf + 1); + return freq / (uart_podf + 1); } static u32 get_cspi_clk(void) @@ -252,6 +270,35 @@ static u32 get_emi_slow_clk(void) return root_freq / (emi_slow_pof + 1); } +#ifdef CONFIG_MX6SL +static u32 get_mmdc_ch0_clk(void) +{ + u32 cbcmr = __raw_readl(&imx_ccm->cbcmr); + u32 cbcdr = __raw_readl(&imx_ccm->cbcdr); + u32 freq, podf; + + podf = (cbcdr & MXC_CCM_CBCDR_MMDC_CH1_PODF_MASK) \ + >> MXC_CCM_CBCDR_MMDC_CH1_PODF_OFFSET; + + switch ((cbcmr & MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_MASK) >> + MXC_CCM_CBCMR_PRE_PERIPH2_CLK_SEL_OFFSET) { + case 0: + freq = decode_pll(PLL_BUS, MXC_HCLK); + break; + case 1: + freq = PLL2_PFD2_FREQ; + break; + case 2: + freq = PLL2_PFD0_FREQ; + break; + case 3: + freq = PLL2_PFD2_DIV_FREQ; + } + + return freq / (podf + 1); + +} +#else static u32 get_mmdc_ch0_clk(void) { u32 cbcdr = __raw_readl(&imx_ccm->cbcdr); @@ -260,6 +307,7 @@ static u32 get_mmdc_ch0_clk(void) return get_periph_clk() / (mmdc_ch0_podf + 1); } +#endif static u32 get_usdhc_clk(u32 port) { diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index 2ea8ca3..fc436fb 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -30,6 +30,7 @@ #include <asm/arch/clock.h> #include <asm/arch/sys_proto.h> #include <asm/imx-common/boot_mode.h> +#include <asm/imx-common/dma.h> #include <stdbool.h> struct scu_regs { @@ -151,6 +152,12 @@ int arch_cpu_init(void) set_vddsoc(1200); /* Set VDDSOC to 1.2V */ imx_set_wdog_powerdown(false); /* Disable PDE bit of WMCR register */ + +#ifdef CONFIG_APBH_DMA + /* Start APBH DMA */ + mxs_dma_init(); +#endif + return 0; } @@ -165,8 +172,8 @@ void enable_caches(void) #if defined(CONFIG_FEC_MXC) void imx_get_mac_from_fuse(int dev_id, unsigned char *mac) { - struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE; - struct fuse_bank *bank = &iim->bank[4]; + struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR; + struct fuse_bank *bank = &ocotp->bank[4]; struct fuse_bank4_regs *fuse = (struct fuse_bank4_regs *)bank->fuse_regs; diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c index 24cbe2d..bff7e9c 100644 --- a/arch/arm/cpu/armv7/omap-common/boot-common.c +++ b/arch/arm/cpu/armv7/omap-common/boot-common.c @@ -23,31 +23,17 @@ #include <asm/arch/mmc_host_def.h> #include <asm/arch/sys_proto.h> -/* - * This is used to verify if the configuration header - * was executed by rom code prior to control of transfer - * to the bootloader. SPL is responsible for saving and - * passing the boot_params pointer to the u-boot. - */ -struct omap_boot_parameters boot_params __attribute__ ((section(".data"))); +DECLARE_GLOBAL_DATA_PTR; #ifdef CONFIG_SPL_BUILD -/* - * We use static variables because global data is not ready yet. - * Initialized data is available in SPL right from the beginning. - * We would not typically need to save these parameters in regular - * U-Boot. This is needed only in SPL at the moment. - */ -u32 omap_bootmode = MMCSD_MODE_FAT; - u32 spl_boot_device(void) { - return (u32) (boot_params.omap_bootdevice); + return (u32) (gd->arch.omap_boot_params.omap_bootdevice); } u32 spl_boot_mode(void) { - return omap_bootmode; + return gd->arch.omap_boot_params.omap_bootmode; } void spl_board_init(void) @@ -73,4 +59,15 @@ int board_mmc_init(bd_t *bis) } return 0; } + +void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) +{ + typedef void __noreturn (*image_entry_noargs_t)(u32 *); + image_entry_noargs_t image_entry = + (image_entry_noargs_t) spl_image->entry_point; + + debug("image entry point: 0x%X\n", spl_image->entry_point); + /* Pass the saved boot_params from rom code */ + image_entry((u32 *)&gd->arch.omap_boot_params); +} #endif diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c index 2b955c7..99910cd 100644 --- a/arch/arm/cpu/armv7/omap-common/clocks-common.c +++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c @@ -716,6 +716,7 @@ void prcm_init(void) setup_non_essential_dplls(); enable_non_essential_clocks(); #endif + setup_warmreset_time(); break; default: break; diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c index cdb4439..11e830a 100644 --- a/arch/arm/cpu/armv7/omap-common/emif-common.c +++ b/arch/arm/cpu/armv7/omap-common/emif-common.c @@ -1075,6 +1075,11 @@ static void do_sdram_init(u32 base) else ddr3_init(base, regs); } + if (warm_reset() && (emif_sdram_type() == EMIF_SDRAM_TYPE_DDR3)) { + set_lpmode_selfrefresh(base); + emif_reset_phy(base); + ddr3_leveling(base, regs); + } /* Write to the shadow registers */ emif_update_timings(base, regs); @@ -1262,10 +1267,10 @@ void sdram_init(void) in_sdram = running_from_sdram(); debug("in_sdram = %d\n", in_sdram); - if (!(in_sdram || warm_reset())) { - if (sdram_type == EMIF_SDRAM_TYPE_LPDDR2) + if (!in_sdram) { + if ((sdram_type == EMIF_SDRAM_TYPE_LPDDR2) && !warm_reset()) bypass_dpll((*prcm)->cm_clkmode_dpll_core); - else + else if (sdram_type == EMIF_SDRAM_TYPE_DDR3) writel(CM_DLL_CTRL_NO_OVERRIDE, (*prcm)->cm_dll_ctrl); } diff --git a/arch/arm/cpu/armv7/omap-common/hwinit-common.c b/arch/arm/cpu/armv7/omap-common/hwinit-common.c index 70d16a8..1645120 100644 --- a/arch/arm/cpu/armv7/omap-common/hwinit-common.c +++ b/arch/arm/cpu/armv7/omap-common/hwinit-common.c @@ -101,11 +101,6 @@ void omap_rev_string(void) } #ifdef CONFIG_SPL_BUILD -static void init_boot_params(void) -{ - boot_params_ptr = (u32 *) &boot_params; -} - void spl_display_print(void) { omap_rev_string(); @@ -116,6 +111,53 @@ void __weak srcomp_enable(void) { } +static void save_omap_boot_params(void) +{ + u32 rom_params = *((u32 *)OMAP_SRAM_SCRATCH_BOOT_PARAMS); + u8 boot_device; + u32 dev_desc, dev_data; + + if ((rom_params < NON_SECURE_SRAM_START) || + (rom_params > NON_SECURE_SRAM_END)) + return; + + /* + * rom_params can be type casted to omap_boot_parameters and + * used. But it not correct to assume that romcode structure + * encoding would be same as u-boot. So use the defined offsets. + */ + gd->arch.omap_boot_params.omap_bootdevice = boot_device = + *((u8 *)(rom_params + BOOT_DEVICE_OFFSET)); + + gd->arch.omap_boot_params.ch_flags = + *((u8 *)(rom_params + CH_FLAGS_OFFSET)); + + if ((boot_device >= MMC_BOOT_DEVICES_START) && + (boot_device <= MMC_BOOT_DEVICES_END)) { + if ((omap_hw_init_context() == + OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL)) { + gd->arch.omap_boot_params.omap_bootmode = + *((u8 *)(rom_params + BOOT_MODE_OFFSET)); + } else { + dev_desc = *((u32 *)(rom_params + DEV_DESC_PTR_OFFSET)); + dev_data = *((u32 *)(dev_desc + DEV_DATA_PTR_OFFSET)); + gd->arch.omap_boot_params.omap_bootmode = + *((u32 *)(dev_data + BOOT_MODE_OFFSET)); + } + } +} + +#ifdef CONFIG_ARCH_CPU_INIT +/* + * SOC specific cpu init + */ +int arch_cpu_init(void) +{ + save_omap_boot_params(); + return 0; +} +#endif /* CONFIG_ARCH_CPU_INIT */ + /* * Routine: s_init * Description: Does early system init of watchdog, muxing, andclocks @@ -132,6 +174,14 @@ void __weak srcomp_enable(void) */ void s_init(void) { + /* + * Save the boot parameters passed from romcode. + * We cannot delay the saving further than this, + * to prevent overwrites. + */ +#ifdef CONFIG_SPL_BUILD + save_omap_boot_params(); +#endif init_omap_revision(); hw_data_init(); @@ -156,7 +206,6 @@ void s_init(void) /* For regular u-boot sdram_init() is called from dram_init() */ sdram_init(); - init_boot_params(); #endif } diff --git a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S index 90b3c8a..c489536 100644 --- a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S +++ b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S @@ -28,59 +28,13 @@ #include <config.h> #include <asm/arch/omap.h> +#include <asm/omap_common.h> #include <asm/arch/spl.h> #include <linux/linkage.h> ENTRY(save_boot_params) - /* - * See if the rom code passed pointer is valid: - * It is not valid if it is not in non-secure SRAM - * This may happen if you are booting with the help of - * debugger - */ - ldr r2, =NON_SECURE_SRAM_START - cmp r2, r0 - bgt 1f - ldr r2, =NON_SECURE_SRAM_END - cmp r2, r0 - blt 1f - - /* - * store the boot params passed from rom code or saved - * and passed by SPL - */ - cmp r0, #0 - beq 1f - ldr r1, =boot_params + ldr r1, =OMAP_SRAM_SCRATCH_BOOT_PARAMS str r0, [r1] -#ifdef CONFIG_SPL_BUILD - /* Store the boot device in spl_boot_device */ - ldrb r2, [r0, #BOOT_DEVICE_OFFSET] @ r1 <- value of boot device - and r2, #BOOT_DEVICE_MASK - ldr r3, =boot_params - strb r2, [r3, #BOOT_DEVICE_OFFSET] @ spl_boot_device <- r1 - - /* - * boot mode is only valid for device that can be raw or FAT booted. - * in other cases it may be fatal to look. While platforms differ - * in the values used for each MMC slot, they are contiguous. - */ - cmp r2, #MMC_BOOT_DEVICES_START - blt 2f - cmp r2, #MMC_BOOT_DEVICES_END - bgt 2f - /* Store the boot mode (raw/FAT) in omap_bootmode */ - ldr r2, [r0, #DEV_DESC_PTR_OFFSET] @ get the device descriptor ptr - ldr r2, [r2, #DEV_DATA_PTR_OFFSET] @ get the pDeviceData ptr - ldr r2, [r2, #BOOT_MODE_OFFSET] @ get the boot mode - ldr r3, =omap_bootmode - str r2, [r3] -#endif -2: - ldrb r2, [r0, #CH_FLAGS_OFFSET] - ldr r3, =boot_params - strb r2, [r3, #CH_FLAGS_OFFSET] -1: bx lr ENDPROC(save_boot_params) diff --git a/arch/arm/cpu/armv7/omap-common/reset.c b/arch/arm/cpu/armv7/omap-common/reset.c index 587bb47..57ea9d9 100644 --- a/arch/arm/cpu/armv7/omap-common/reset.c +++ b/arch/arm/cpu/armv7/omap-common/reset.c @@ -39,3 +39,7 @@ u32 __weak warm_reset(void) { return (readl(PRM_RSTST) & PRM_RSTST_WARM_RESET_MASK); } + +void __weak setup_warmreset_time(void) +{ +} diff --git a/arch/arm/cpu/armv7/omap4/emif.c b/arch/arm/cpu/armv7/omap4/emif.c index 53f6063..0ddf35f 100644 --- a/arch/arm/cpu/armv7/omap4/emif.c +++ b/arch/arm/cpu/armv7/omap4/emif.c @@ -31,8 +31,8 @@ #include <asm/utils.h> #ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS -u32 *const T_num = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_T_NUM; -u32 *const T_den = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_T_DEN; +u32 *const T_num = (u32 *)OMAP_SRAM_SCRATCH_EMIF_T_NUM; +u32 *const T_den = (u32 *)OMAP_SRAM_SCRATCH_EMIF_T_DEN; #endif #ifdef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS diff --git a/arch/arm/cpu/armv7/omap4/hw_data.c b/arch/arm/cpu/armv7/omap4/hw_data.c index 04977b4..06a2fc8 100644 --- a/arch/arm/cpu/armv7/omap4/hw_data.c +++ b/arch/arm/cpu/armv7/omap4/hw_data.c @@ -40,7 +40,7 @@ struct dplls const **dplls_data = struct vcores_data const **omap_vcores = (struct vcores_data const **) OMAP_SRAM_SCRATCH_VCORES_PTR; struct omap_sys_ctrl_regs const **ctrl = - (struct omap_sys_ctrl_regs const **)OMAP4_SRAM_SCRATCH_SYS_CTRL; + (struct omap_sys_ctrl_regs const **)OMAP_SRAM_SCRATCH_SYS_CTRL; /* * The M & N values in the following tables are created using the diff --git a/arch/arm/cpu/armv7/omap4/hwinit.c b/arch/arm/cpu/armv7/omap4/hwinit.c index 2db517b..81f5a48 100644 --- a/arch/arm/cpu/armv7/omap4/hwinit.c +++ b/arch/arm/cpu/armv7/omap4/hwinit.c @@ -34,10 +34,11 @@ #include <asm/sizes.h> #include <asm/emif.h> #include <asm/arch/gpio.h> +#include <asm/omap_common.h> DECLARE_GLOBAL_DATA_PTR; -u32 *const omap_si_rev = (u32 *)OMAP4_SRAM_SCRATCH_OMAP4_REV; +u32 *const omap_si_rev = (u32 *)OMAP_SRAM_SCRATCH_OMAP_REV; static const struct gpio_bank gpio_bank_44xx[6] = { { (void *)OMAP44XX_GPIO1_BASE, METHOD_GPIO_24XX }, diff --git a/arch/arm/cpu/armv7/omap5/emif.c b/arch/arm/cpu/armv7/omap5/emif.c index 3f37abd..b4c1319 100644 --- a/arch/arm/cpu/armv7/omap5/emif.c +++ b/arch/arm/cpu/armv7/omap5/emif.c @@ -32,8 +32,8 @@ #ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS #define print_timing_reg(reg) debug(#reg" - 0x%08x\n", (reg)) -static u32 *const T_num = (u32 *)OMAP5_SRAM_SCRATCH_EMIF_T_NUM; -static u32 *const T_den = (u32 *)OMAP5_SRAM_SCRATCH_EMIF_T_DEN; +static u32 *const T_num = (u32 *)OMAP_SRAM_SCRATCH_EMIF_T_NUM; +static u32 *const T_den = (u32 *)OMAP_SRAM_SCRATCH_EMIF_T_DEN; #endif #ifdef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c index ced274e..604fa42 100644 --- a/arch/arm/cpu/armv7/omap5/hw_data.c +++ b/arch/arm/cpu/armv7/omap5/hw_data.c @@ -41,7 +41,7 @@ struct dplls const **dplls_data = struct vcores_data const **omap_vcores = (struct vcores_data const **) OMAP_SRAM_SCRATCH_VCORES_PTR; struct omap_sys_ctrl_regs const **ctrl = - (struct omap_sys_ctrl_regs const **)OMAP5_SRAM_SCRATCH_SYS_CTRL; + (struct omap_sys_ctrl_regs const **)OMAP_SRAM_SCRATCH_SYS_CTRL; /* OPP HIGH FREQUENCY for ES2.0 */ static const struct dpll_params mpu_dpll_params_1_5ghz[NUM_SYS_CLKS] = { @@ -403,6 +403,7 @@ void enable_basic_uboot_clocks(void) }; u32 const clk_modules_hw_auto_essential[] = { + (*prcm)->cm_l3init_hsusbtll_clkctrl, 0 }; @@ -411,7 +412,7 @@ void enable_basic_uboot_clocks(void) (*prcm)->cm_l4per_i2c2_clkctrl, (*prcm)->cm_l4per_i2c3_clkctrl, (*prcm)->cm_l4per_i2c4_clkctrl, - (*prcm)->cm_l3init_hsusbtll_clkctrl, + (*prcm)->cm_l4per_i2c5_clkctrl, (*prcm)->cm_l3init_hsusbhost_clkctrl, (*prcm)->cm_l3init_fsusb_clkctrl, 0 diff --git a/arch/arm/cpu/armv7/omap5/hwinit.c b/arch/arm/cpu/armv7/omap5/hwinit.c index 2f4b247..e192fea 100644 --- a/arch/arm/cpu/armv7/omap5/hwinit.c +++ b/arch/arm/cpu/armv7/omap5/hwinit.c @@ -37,10 +37,11 @@ #include <asm/utils.h> #include <asm/arch/gpio.h> #include <asm/emif.h> +#include <asm/omap_common.h> DECLARE_GLOBAL_DATA_PTR; -u32 *const omap_si_rev = (u32 *)OMAP5_SRAM_SCRATCH_OMAP5_REV; +u32 *const omap_si_rev = (u32 *)OMAP_SRAM_SCRATCH_OMAP_REV; static struct gpio_bank gpio_bank_54xx[6] = { { (void *)OMAP54XX_GPIO1_BASE, METHOD_GPIO_24XX }, @@ -363,3 +364,22 @@ u32 warm_reset(void) { return readl((*prcm)->prm_rstst) & PRM_RSTST_WARM_RESET_MASK; } + +void setup_warmreset_time(void) +{ + u32 rst_time, rst_val; + +#ifndef CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC + rst_time = CONFIG_DEFAULT_OMAP_RESET_TIME_MAX_USEC; +#else + rst_time = CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC; +#endif + rst_time = usec_to_32k(rst_time) << RSTTIME1_SHIFT; + + if (rst_time > RSTTIME1_MASK) + rst_time = RSTTIME1_MASK; + + rst_val = readl((*prcm)->prm_rsttime) & ~RSTTIME1_MASK; + rst_val |= rst_time; + writel(rst_val, (*prcm)->prm_rsttime); +} diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c index b8a61fe..e9f6a32 100644 --- a/arch/arm/cpu/armv7/omap5/prcm-regs.c +++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c @@ -729,6 +729,7 @@ struct prcm_regs const omap5_es2_prcm = { .cm_wkupaon_io_srcomp_clkctrl = 0x4ae07998, .prm_rstctrl = 0x4ae07c00, .prm_rstst = 0x4ae07c04, + .prm_rsttime = 0x4ae07c08, .prm_vc_val_bypass = 0x4ae07ca0, .prm_vc_cfg_i2c_mode = 0x4ae07cb4, .prm_vc_cfg_i2c_clk = 0x4ae07cb8, @@ -952,6 +953,7 @@ struct prcm_regs const dra7xx_prcm = { .cm_wkupaon_scrm_clkctrl = 0x4ae07890, .prm_rstctrl = 0x4ae07d00, .prm_rstst = 0x4ae07d04, + .prm_rsttime = 0x4ae07d08, .prm_vc_val_bypass = 0x4ae07da0, .prm_vc_cfg_i2c_mode = 0x4ae07db4, .prm_vc_cfg_i2c_clk = 0x4ae07db8, diff --git a/arch/arm/cpu/armv7/zynq/slcr.c b/arch/arm/cpu/armv7/zynq/slcr.c index 788a8fd..52048c6 100644 --- a/arch/arm/cpu/armv7/zynq/slcr.c +++ b/arch/arm/cpu/armv7/zynq/slcr.c @@ -28,6 +28,9 @@ #define SLCR_LOCK_MAGIC 0x767B #define SLCR_UNLOCK_MAGIC 0xDF0D +#define SLCR_IDCODE_MASK 0x1F000 +#define SLCR_IDCODE_SHIFT 12 + static int slcr_lock = 1; /* 1 means locked, 0 means unlocked */ void zynq_slcr_lock(void) @@ -61,3 +64,61 @@ void zynq_slcr_cpu_reset(void) writel(1, &slcr_base->pss_rst_ctrl); } + +/* Setup clk for network */ +void zynq_slcr_gem_clk_setup(u32 gem_id, u32 rclk, u32 clk) +{ + zynq_slcr_unlock(); + + if (gem_id > 1) { + printf("Non existing GEM id %d\n", gem_id); + goto out; + } + + if (gem_id) { + /* Set divisors for appropriate frequency in GEM_CLK_CTRL */ + writel(clk, &slcr_base->gem1_clk_ctrl); + /* Configure GEM_RCLK_CTRL */ + writel(rclk, &slcr_base->gem1_rclk_ctrl); + } else { + /* Set divisors for appropriate frequency in GEM_CLK_CTRL */ + writel(clk, &slcr_base->gem0_clk_ctrl); + /* Configure GEM_RCLK_CTRL */ + writel(rclk, &slcr_base->gem0_rclk_ctrl); + } + +out: + zynq_slcr_lock(); +} + +void zynq_slcr_devcfg_disable(void) +{ + zynq_slcr_unlock(); + + /* Disable AXI interface */ + writel(0xFFFFFFFF, &slcr_base->fpga_rst_ctrl); + + /* Set Level Shifters DT618760 */ + writel(0xA, &slcr_base->lvl_shftr_en); + + zynq_slcr_lock(); +} + +void zynq_slcr_devcfg_enable(void) +{ + zynq_slcr_unlock(); + + /* Set Level Shifters DT618760 */ + writel(0xF, &slcr_base->lvl_shftr_en); + + /* Disable AXI interface */ + writel(0x0, &slcr_base->fpga_rst_ctrl); + + zynq_slcr_lock(); +} + +u32 zynq_slcr_get_idcode(void) +{ + return (readl(&slcr_base->pss_idcode) & SLCR_IDCODE_MASK) >> + SLCR_IDCODE_SHIFT; +} diff --git a/arch/arm/cpu/armv7/zynq/timer.c b/arch/arm/cpu/armv7/zynq/timer.c index 45b405a..8c4357d 100644 --- a/arch/arm/cpu/armv7/zynq/timer.c +++ b/arch/arm/cpu/armv7/zynq/timer.c @@ -44,6 +44,7 @@ #include <common.h> #include <div64.h> #include <asm/io.h> +#include <asm/arch/hardware.h> DECLARE_GLOBAL_DATA_PTR; @@ -54,7 +55,7 @@ struct scu_timer { }; static struct scu_timer *timer_base = - (struct scu_timer *) CONFIG_SCUTIMER_BASEADDR; + (struct scu_timer *)ZYNQ_SCUTIMER_BASEADDR; #define SCUTIMER_CONTROL_PRESCALER_MASK 0x0000FF00 /* Prescaler */ #define SCUTIMER_CONTROL_PRESCALER_SHIFT 8 @@ -114,15 +115,43 @@ ulong get_timer_masked(void) void __udelay(unsigned long usec) { - unsigned long long tmp; - ulong tmo; - - tmo = usec / (1000000 / CONFIG_SYS_HZ); - tmp = get_ticks() + tmo; /* Get current timestamp */ - - while (get_ticks() < tmp) { /* Loop till event */ - /* NOP */; - } + u32 countticks; + u32 timeend; + u32 timediff; + u32 timenow; + + if (usec == 0) + return; + + countticks = (u32) (((unsigned long long) TIMER_TICK_HZ * usec) / + 1000000); + + /* decrementing timer */ + timeend = readl(&timer_base->counter) - countticks; + +#if TIMER_LOAD_VAL != 0xFFFFFFFF + /* do not manage multiple overflow */ + if (countticks >= TIMER_LOAD_VAL) + countticks = TIMER_LOAD_VAL - 1; +#endif + + do { + timenow = readl(&timer_base->counter); + + if (timenow >= timeend) { + /* normal case */ + timediff = timenow - timeend; + } else { + if ((TIMER_LOAD_VAL - timeend + timenow) <= + countticks) { + /* overflow */ + timediff = TIMER_LOAD_VAL - timeend + timenow; + } else { + /* missed the exact match */ + break; + } + } + } while (timediff > 0); } /* Timer without interrupts */ diff --git a/arch/arm/cpu/ixp/config.mk b/arch/arm/cpu/ixp/config.mk index b02e8af..fd3c29f 100644 --- a/arch/arm/cpu/ixp/config.mk +++ b/arch/arm/cpu/ixp/config.mk @@ -31,10 +31,6 @@ PLATFORM_CPPFLAGS += -mbig-endian -march=armv5te -mtune=strongarm1100 PLATFORM_LDFLAGS += -EB USE_PRIVATE_LIBGCC = yes -# -fdata-sections triggers "section .bss overlaps section .rel.dyn" linker error -PLATFORM_RELFLAGS += -ffunction-sections -LDFLAGS_u-boot += --gc-sections - # ========================================================================= # # Supply options according to compiler version diff --git a/arch/arm/cpu/pxa/pxa2xx.c b/arch/arm/cpu/pxa/pxa2xx.c index 09e8177..0c18610 100644 --- a/arch/arm/cpu/pxa/pxa2xx.c +++ b/arch/arm/cpu/pxa/pxa2xx.c @@ -284,7 +284,7 @@ void i2c_clk_enable(void) writel(readl(CKEN) | CKEN14_I2C, CKEN); } -void reset_cpu(ulong ignored) __attribute__((noreturn)); +void __attribute__((weak)) reset_cpu(ulong ignored) __attribute__((noreturn)); void reset_cpu(ulong ignored) { diff --git a/arch/arm/cpu/tegra-common/ap.c b/arch/arm/cpu/tegra-common/ap.c index 9b77b2b..e099683 100644 --- a/arch/arm/cpu/tegra-common/ap.c +++ b/arch/arm/cpu/tegra-common/ap.c @@ -72,6 +72,7 @@ int tegra_get_chip_sku(void) switch (chip_id) { case CHIPID_TEGRA20: switch (sku_id) { + case SKU_ID_T20_7: case SKU_ID_T20: return TEGRA_SOC_T20; case SKU_ID_T25SE: @@ -92,6 +93,7 @@ int tegra_get_chip_sku(void) case CHIPID_TEGRA114: switch (sku_id) { case SKU_ID_T114_ENG: + case SKU_ID_T114_1: return TEGRA_SOC_T114; } break; diff --git a/arch/arm/cpu/tegra-common/clock.c b/arch/arm/cpu/tegra-common/clock.c index 9156d00..268fb91 100644 --- a/arch/arm/cpu/tegra-common/clock.c +++ b/arch/arm/cpu/tegra-common/clock.c @@ -321,17 +321,17 @@ unsigned clock_adjust_periph_pll_div(enum periph_id periph_id, unsigned effective_rate; int mux_bits, divider_bits, source; int divider; + int xdiv = 0; /* work out the source clock and set it */ source = get_periph_clock_source(periph_id, parent, &mux_bits, ÷r_bits); + divider = find_best_divider(divider_bits, pll_rate[parent], + rate, &xdiv); if (extra_div) - divider = find_best_divider(divider_bits, pll_rate[parent], - rate, extra_div); - else - divider = clk_get_divider(divider_bits, pll_rate[parent], - rate); + *extra_div = xdiv; + assert(divider >= 0); if (adjust_periph_pll(periph_id, source, mux_bits, divider)) return -1U; diff --git a/arch/arm/imx-common/Makefile b/arch/arm/imx-common/Makefile index 44b6822..8bba8a5 100644 --- a/arch/arm/imx-common/Makefile +++ b/arch/arm/imx-common/Makefile @@ -27,10 +27,16 @@ include $(TOPDIR)/config.mk LIB = $(obj)libimx-common.o +ifeq ($(SOC),$(filter $(SOC),mx25 mx35 mx5 mx6)) +COBJS-y = iomux-v3.o +endif ifeq ($(SOC),$(filter $(SOC),mx5 mx6)) -COBJS-y = iomux-v3.o timer.o cpu.o speed.o +COBJS-y += timer.o cpu.o speed.o COBJS-$(CONFIG_I2C_MXC) += i2c-mxv7.o endif +ifeq ($(SOC),$(filter $(SOC),mx6 mxs)) +COBJS-y += misc.o +endif COBJS-$(CONFIG_CMD_BMODE) += cmd_bmode.o COBJS-$(CONFIG_CMD_HDMIDETECT) += cmd_hdmidet.o COBJS := $(sort $(COBJS-y)) @@ -58,8 +64,11 @@ $(OBJTREE)/SPL: $(OBJTREE)/spl/u-boot-spl.bin $(OBJTREE)/$(patsubst "%",%,$(CONF $(OBJTREE)/u-boot-with-spl.imx: $(OBJTREE)/SPL $(OBJTREE)/u-boot.bin $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SPL_PAD_TO) \ -I binary -O binary $< $(OBJTREE)/spl/u-boot-spl-pad.imx - cat $(OBJTREE)/spl/u-boot-spl-pad.imx $(OBJTREE)/u-boot.bin > $@ - rm $(OBJTREE)/spl/u-boot-spl-pad.imx + $(OBJTREE)/tools/mkimage -A arm -O U-Boot -a $(CONFIG_SYS_TEXT_BASE) \ + -e $(CONFIG_SYS_TEXT_BASE) -C none -d $(OBJTREE)/u-boot.bin \ + $(OBJTREE)/u-boot.uim + cat $(OBJTREE)/spl/u-boot-spl-pad.imx $(OBJTREE)/u-boot.uim > $@ + rm $(OBJTREE)/spl/u-boot-spl-pad.imx $(OBJTREE)/u-boot.uim $(OBJTREE)/u-boot-with-nand-spl.imx: $(OBJTREE)/SPL $(OBJTREE)/u-boot.bin (echo -ne '\x00\x00\x00\x00\x46\x43\x42\x20\x01' && \ @@ -69,8 +78,11 @@ $(OBJTREE)/u-boot-with-nand-spl.imx: $(OBJTREE)/SPL $(OBJTREE)/u-boot.bin -I binary -O binary $(OBJTREE)/spl/u-boot-nand-spl.imx \ $(OBJTREE)/spl/u-boot-nand-spl-pad.imx rm $(OBJTREE)/spl/u-boot-nand-spl.imx - cat $(OBJTREE)/spl/u-boot-nand-spl-pad.imx $(OBJTREE)/u-boot.bin > $@ - rm $(OBJTREE)/spl/u-boot-nand-spl-pad.imx + $(OBJTREE)/tools/mkimage -A arm -O U-Boot -a $(CONFIG_SYS_TEXT_BASE) \ + -e $(CONFIG_SYS_TEXT_BASE) -C none -d $(OBJTREE)/u-boot.bin \ + $(OBJTREE)/u-boot.uim + cat $(OBJTREE)/spl/u-boot-nand-spl-pad.imx $(OBJTREE)/u-boot.uim > $@ + rm $(OBJTREE)/spl/u-boot-nand-spl-pad.imx $(OBJTREE)/u-boot.uim ######################################################################### diff --git a/arch/arm/imx-common/iomux-v3.c b/arch/arm/imx-common/iomux-v3.c index 08fad78..7fe5ce7 100644 --- a/arch/arm/imx-common/iomux-v3.c +++ b/arch/arm/imx-common/iomux-v3.c @@ -30,7 +30,7 @@ static void *base = (void *)IOMUXC_BASE_ADDR; /* * configures a single pad in the iomuxer */ -int imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad) +void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad) { u32 mux_ctrl_ofs = (pad & MUX_CTRL_OFS_MASK) >> MUX_CTRL_OFS_SHIFT; u32 mux_mode = (pad & MUX_MODE_MASK) >> MUX_MODE_SHIFT; @@ -50,22 +50,14 @@ int imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad) if (!(pad_ctrl & NO_PAD_CTRL) && pad_ctrl_ofs) __raw_writel(pad_ctrl, base + pad_ctrl_ofs); - - return 0; } -int imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list, - unsigned count) +void imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list, + unsigned count) { iomux_v3_cfg_t const *p = pad_list; int i; - int ret; - for (i = 0; i < count; i++) { - ret = imx_iomux_v3_setup_pad(*p); - if (ret) - return ret; - p++; - } - return 0; + for (i = 0; i < count; i++) + imx_iomux_v3_setup_pad(*p++); } diff --git a/arch/arm/imx-common/misc.c b/arch/arm/imx-common/misc.c new file mode 100644 index 0000000..220785c --- /dev/null +++ b/arch/arm/imx-common/misc.c @@ -0,0 +1,84 @@ +/* + * Copyright 2013 Stefan Roese <sr@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <common.h> +#include <asm/errno.h> +#include <asm/io.h> +#include <asm/imx-common/regs-common.h> + +/* 1 second delay should be plenty of time for block reset. */ +#define RESET_MAX_TIMEOUT 1000000 + +#define MXS_BLOCK_SFTRST (1 << 31) +#define MXS_BLOCK_CLKGATE (1 << 30) + +int mxs_wait_mask_set(struct mxs_register_32 *reg, uint32_t mask, unsigned + int timeout) +{ + while (--timeout) { + if ((readl(®->reg) & mask) == mask) + break; + udelay(1); + } + + return !timeout; +} + +int mxs_wait_mask_clr(struct mxs_register_32 *reg, uint32_t mask, unsigned + int timeout) +{ + while (--timeout) { + if ((readl(®->reg) & mask) == 0) + break; + udelay(1); + } + + return !timeout; +} + +int mxs_reset_block(struct mxs_register_32 *reg) +{ + /* Clear SFTRST */ + writel(MXS_BLOCK_SFTRST, ®->reg_clr); + + if (mxs_wait_mask_clr(reg, MXS_BLOCK_SFTRST, RESET_MAX_TIMEOUT)) + return 1; + + /* Clear CLKGATE */ + writel(MXS_BLOCK_CLKGATE, ®->reg_clr); + + /* Set SFTRST */ + writel(MXS_BLOCK_SFTRST, ®->reg_set); + + /* Wait for CLKGATE being set */ + if (mxs_wait_mask_set(reg, MXS_BLOCK_CLKGATE, RESET_MAX_TIMEOUT)) + return 1; + + /* Clear SFTRST */ + writel(MXS_BLOCK_SFTRST, ®->reg_clr); + + if (mxs_wait_mask_clr(reg, MXS_BLOCK_SFTRST, RESET_MAX_TIMEOUT)) + return 1; + + /* Clear CLKGATE */ + writel(MXS_BLOCK_CLKGATE, ®->reg_clr); + + if (mxs_wait_mask_clr(reg, MXS_BLOCK_CLKGATE, RESET_MAX_TIMEOUT)) + return 1; + + return 0; +} diff --git a/arch/arm/include/asm/arch-am33xx/ddr_defs.h b/arch/arm/include/asm/arch-am33xx/ddr_defs.h index fb4e78e..bb53a6a 100644 --- a/arch/arm/include/asm/arch-am33xx/ddr_defs.h +++ b/arch/arm/include/asm/arch-am33xx/ddr_defs.h @@ -117,6 +117,23 @@ #define MT41J512M8RH125_PHY_WR_DATA 0x74 #define MT41J512M8RH125_IOCTRL_VALUE 0x18B +/* Samsung K4B2G1646E-BIH9 */ +#define K4B2G1646EBIH9_EMIF_READ_LATENCY 0x06 +#define K4B2G1646EBIH9_EMIF_TIM1 0x0888A39B +#define K4B2G1646EBIH9_EMIF_TIM2 0x2A04011A +#define K4B2G1646EBIH9_EMIF_TIM3 0x501F820F +#define K4B2G1646EBIH9_EMIF_SDCFG 0x61C24AB2 +#define K4B2G1646EBIH9_EMIF_SDREF 0x0000093B +#define K4B2G1646EBIH9_ZQ_CFG 0x50074BE4 +#define K4B2G1646EBIH9_DLL_LOCK_DIFF 0x1 +#define K4B2G1646EBIH9_RATIO 0x40 +#define K4B2G1646EBIH9_INVERT_CLKOUT 0x1 +#define K4B2G1646EBIH9_RD_DQS 0x3B +#define K4B2G1646EBIH9_WR_DQS 0x85 +#define K4B2G1646EBIH9_PHY_FIFO_WE 0x100 +#define K4B2G1646EBIH9_PHY_WR_DATA 0xC1 +#define K4B2G1646EBIH9_IOCTRL_VALUE 0x18B + /** * Configure DMM */ diff --git a/arch/arm/include/asm/arch-am33xx/hardware_ti814x.h b/arch/arm/include/asm/arch-am33xx/hardware_ti814x.h index a950ac3..8f9315c 100644 --- a/arch/arm/include/asm/arch-am33xx/hardware_ti814x.h +++ b/arch/arm/include/asm/arch-am33xx/hardware_ti814x.h @@ -29,6 +29,7 @@ /* Control Module Base Address */ #define CTRL_BASE 0x48140000 +#define CTRL_DEVICE_BASE 0x48140600 /* PRCM Base Address */ #define PRCM_BASE 0x48180000 diff --git a/arch/arm/include/asm/arch-am33xx/omap.h b/arch/arm/include/asm/arch-am33xx/omap.h index d28f9a8..7e3bb9c 100644 --- a/arch/arm/include/asm/arch-am33xx/omap.h +++ b/arch/arm/include/asm/arch-am33xx/omap.h @@ -35,29 +35,4 @@ #define NON_SECURE_SRAM_START 0x40300000 #define NON_SECURE_SRAM_END 0x40320000 #endif - -/* ROM code defines */ -/* Boot device */ -#define BOOT_DEVICE_MASK 0xFF -#define BOOT_DEVICE_OFFSET 0x8 -#define DEV_DESC_PTR_OFFSET 0x4 -#define DEV_DATA_PTR_OFFSET 0x18 -#define BOOT_MODE_OFFSET 0x8 -#define RESET_REASON_OFFSET 0x9 -#define CH_FLAGS_OFFSET 0xA - -#define CH_FLAGS_CHSETTINGS (0x1 << 0) -#define CH_FLAGS_CHRAM (0x1 << 1) -#define CH_FLAGS_CHFLASH (0x1 << 2) -#define CH_FLAGS_CHMMCSD (0x1 << 3) - -#ifndef __ASSEMBLY__ -struct omap_boot_parameters { - char *boot_message; - unsigned int mem_boot_descriptor; - unsigned char omap_bootdevice; - unsigned char reset_reason; - unsigned char ch_flags; -}; -#endif #endif diff --git a/arch/arm/include/asm/arch-at91/at91_common.h b/arch/arm/include/asm/arch-at91/at91_common.h index 8282f46..5843935 100644 --- a/arch/arm/include/asm/arch-at91/at91_common.h +++ b/arch/arm/include/asm/arch-at91/at91_common.h @@ -35,5 +35,6 @@ void at91_seriald_hw_init(void); void at91_spi0_hw_init(unsigned long cs_mask); void at91_spi1_hw_init(unsigned long cs_mask); void at91_uhp_hw_init(void); +void at91_lcd_hw_init(void); #endif /* AT91_COMMON_H */ diff --git a/arch/arm/include/asm/arch-at91/at91_dbu.h b/arch/arm/include/asm/arch-at91/at91_dbu.h index 3429293..9a640a5 100644 --- a/arch/arm/include/asm/arch-at91/at91_dbu.h +++ b/arch/arm/include/asm/arch-at91/at91_dbu.h @@ -38,4 +38,8 @@ typedef struct at91_dbu { #define AT91_DBU_CID_ARCH_9xx 0x01900000 #define AT91_DBU_CID_ARCH_9XExx 0x02900000 +#define AT91_DBU_CIDR_MASK 0x1f +#define AT91_DBU_CIDR 0x40 +#define AT91_DBU_EXID 0x44 + #endif diff --git a/arch/arm/include/asm/arch-at91/at91_pmc.h b/arch/arm/include/asm/arch-at91/at91_pmc.h index 086cb9b..66075b4 100644 --- a/arch/arm/include/asm/arch-at91/at91_pmc.h +++ b/arch/arm/include/asm/arch-at91/at91_pmc.h @@ -55,7 +55,16 @@ typedef struct at91_pmc { u32 reserved5[21]; u32 wpmr; /* 0xE4 Write Protect Mode Register (CAP0) */ u32 wpsr; /* 0xE8 Write Protect Status Register (CAP0) */ +#ifdef CONFIG_SAMA5D3 + u32 reserved6[8]; + u32 pcer1; /* 0x100 Periperial Clock Enable Register 1 */ + u32 pcdr1; /* 0x104 Periperial Clock Disable Register 1 */ + u32 pcsr1; /* 0x108 Periperial Clock Status Register 1 */ + u32 pcr; /* 0x10c Periperial Control Register */ + u32 ocr; /* 0x110 Oscillator Calibration Register */ +#else u32 reserved8[5]; +#endif } at91_pmc_t; #endif /* end not assembly */ @@ -82,6 +91,16 @@ typedef struct at91_pmc { #define AT91_PMC_MCKR_CSS_PLLB 0x00000003 #define AT91_PMC_MCKR_CSS_MASK 0x00000003 +#ifdef CONFIG_SAMA5D3 +#define AT91_PMC_MCKR_PRES_1 0x00000000 +#define AT91_PMC_MCKR_PRES_2 0x00000010 +#define AT91_PMC_MCKR_PRES_4 0x00000020 +#define AT91_PMC_MCKR_PRES_8 0x00000030 +#define AT91_PMC_MCKR_PRES_16 0x00000040 +#define AT91_PMC_MCKR_PRES_32 0x00000050 +#define AT91_PMC_MCKR_PRES_64 0x00000060 +#define AT91_PMC_MCKR_PRES_MASK 0x00000070 +#else #define AT91_PMC_MCKR_PRES_1 0x00000000 #define AT91_PMC_MCKR_PRES_2 0x00000004 #define AT91_PMC_MCKR_PRES_4 0x00000008 @@ -90,6 +109,7 @@ typedef struct at91_pmc { #define AT91_PMC_MCKR_PRES_32 0x00000014 #define AT91_PMC_MCKR_PRES_64 0x00000018 #define AT91_PMC_MCKR_PRES_MASK 0x0000001C +#endif #ifdef CONFIG_AT91RM9200 #define AT91_PMC_MCKR_MDIV_1 0x00000000 @@ -100,6 +120,9 @@ typedef struct at91_pmc { #else #define AT91_PMC_MCKR_MDIV_1 0x00000000 #define AT91_PMC_MCKR_MDIV_2 0x00000100 +#ifdef CONFIG_SAMA5D3 +#define AT91_PMC_MCKR_MDIV_3 0x00000300 +#endif #define AT91_PMC_MCKR_MDIV_4 0x00000200 #define AT91_PMC_MCKR_MDIV_MASK 0x00000300 #endif diff --git a/arch/arm/include/asm/arch-at91/at91sam9_matrix.h b/arch/arm/include/asm/arch-at91/at91sam9_matrix.h index b9a93b0..6e0bebd 100644 --- a/arch/arm/include/asm/arch-at91/at91sam9_matrix.h +++ b/arch/arm/include/asm/arch-at91/at91sam9_matrix.h @@ -23,7 +23,7 @@ #include <asm/arch/at91cap9_matrix.h> #elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) #include <asm/arch/at91sam9g45_matrix.h> -#elif defined(CONFIG_AT91SAM9X5) +#elif defined(CONFIG_AT91SAM9N12) || defined(CONFIG_AT91SAM9X5) #include <asm/arch/at91sam9x5_matrix.h> #else #error "Unsupported AT91SAM9/CAP9 processor" diff --git a/arch/arm/include/asm/arch-at91/at91sam9x5.h b/arch/arm/include/asm/arch-at91/at91sam9x5.h index b7d1932..85e42f5 100644 --- a/arch/arm/include/asm/arch-at91/at91sam9x5.h +++ b/arch/arm/include/asm/arch-at91/at91sam9x5.h @@ -1,10 +1,10 @@ /* * Chip-specific header file for the AT91SAM9x5 family * - * Copyright (C) 2012 Atmel Corporation. + * Copyright (C) 2012-2013 Atmel Corporation. * * Definitions for the SoC: - * AT91SAM9x5 + * AT91SAM9x5 & AT91SAM9N12 * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -22,10 +22,12 @@ #define ATMEL_ID_SYS 1 /* System Controller Interrupt */ #define ATMEL_ID_PIOAB 2 /* Parallel I/O Controller A and B */ #define ATMEL_ID_PIOCD 3 /* Parallel I/O Controller C and D */ -#define ATMEL_ID_SMD 4 /* SMD Soft Modem (SMD) */ +#define ATMEL_ID_SMD 4 /* SMD Soft Modem (SMD), only for AT91SAM9X5 */ +#define ATMEL_ID_FUSE 4 /* FUSE Controller, only for AT91SAM9N12 */ #define ATMEL_ID_USART0 5 /* USART 0 */ #define ATMEL_ID_USART1 6 /* USART 1 */ #define ATMEL_ID_USART2 7 /* USART 2 */ +#define ATMEL_ID_USART3 8 /* USART 3 */ #define ATMEL_ID_TWI0 9 /* Two-Wire Interface 0 */ #define ATMEL_ID_TWI1 10 /* Two-Wire Interface 1 */ #define ATMEL_ID_TWI2 11 /* Two-Wire Interface 2 */ @@ -46,6 +48,7 @@ #define ATMEL_ID_HSMCI1 26 /* High Speed Multimedia Card Interface 1 */ #define ATMEL_ID_EMAC1 27 /* Ethernet MAC1 */ #define ATMEL_ID_SSC 28 /* Synchronous Serial Controller */ +#define ATMEL_ID_TRNG 30 /* True Random Number Generator */ #define ATMEL_ID_IRQ 31 /* Advanced Interrupt Controller */ /* @@ -85,6 +88,7 @@ /* * System Peripherals */ +#define ATMEL_BASE_FUSE 0xffffdc00 #define ATMEL_BASE_MATRIX 0xffffde00 #define ATMEL_BASE_PMECC 0xffffe000 #define ATMEL_BASE_PMERRLOC 0xffffe600 @@ -111,10 +115,15 @@ */ #define ATMEL_BASE_ROM 0x00100000 /* Internal ROM base address */ #define ATMEL_BASE_SRAM 0x00300000 /* Internal SRAM base address */ + +#ifdef CONFIG_AT91SAM9N12 +#define ATMEL_BASE_OHCI 0x00500000 /* USB Host controller */ +#else /* AT91SAM9X5 */ #define ATMEL_BASE_SMD 0x00400000 /* SMD Controller */ #define ATMEL_BASE_UDPHS_FIFO 0x00500000 /* USB Device HS controller */ #define ATMEL_BASE_OHCI 0x00600000 /* USB Host controller (OHCI) */ #define ATMEL_BASE_EHCI 0x00700000 /* USB Host controller (EHCI) */ +#endif /* 9x5 series chip id definitions */ #define ARCH_ID_AT91SAM9X5 0x819a05a0 @@ -140,7 +149,11 @@ /* * Cpu Name */ +#ifdef CONFIG_AT91SAM9N12 +#define ATMEL_CPU_NAME "AT91SAM9N12" +#else /* AT91SAM9X5 */ #define ATMEL_CPU_NAME get_cpu_name() +#endif /* * Other misc defines diff --git a/arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h b/arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h index d6ce6fa..0d33069 100644 --- a/arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h +++ b/arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h @@ -1,10 +1,10 @@ /* * Matrix-centric header file for the AT91SAM9X5 family * - * Copyright (C) 2012 Atmel Corporation. + * Copyright (C) 2012-2013 Atmel Corporation. * * Memory Controllers (MATRIX, EBI) - System peripherals registers. - * Based on AT91SAM9X5 preliminary datasheet. + * Based on AT91SAM9X5 & AT91SAM9N12 preliminary datasheet. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -17,14 +17,25 @@ #ifndef __ASSEMBLY__ +/* AT91SAM9N12 Matrix definition is a subset of AT91SAM9X5. */ struct at91_matrix { u32 mcfg[16]; u32 scfg[16]; u32 pras[16][2]; u32 mrcr; /* 0x100 Master Remap Control */ - u32 filler[7]; + u32 filler[5]; +#ifdef CONFIG_AT91SAM9X5 + u32 filler1[2]; +#endif + /* EBI Chip Select Assignment Register + * 0x118: AT91SAM9N12 + * 0x120: AT91SAM9X5 + */ u32 ebicsa; u32 filler4[47]; +#ifdef CONFIG_AT91SAM9N12 + u32 filler5[2]; +#endif u32 wpmr; u32 wpsr; }; diff --git a/arch/arm/include/asm/arch-at91/clk.h b/arch/arm/include/asm/arch-at91/clk.h index d4852a3..04b0f83 100644 --- a/arch/arm/include/asm/arch-at91/clk.h +++ b/arch/arm/include/asm/arch-at91/clk.h @@ -95,4 +95,5 @@ static inline unsigned long get_mci_clk_rate(void) } int at91_clock_init(unsigned long main_clock); +void at91_periph_clk_enable(int id); #endif /* __ASM_ARM_ARCH_CLK_H__ */ diff --git a/arch/arm/include/asm/arch-at91/hardware.h b/arch/arm/include/asm/arch-at91/hardware.h index 4c4ee70..b04641e 100644 --- a/arch/arm/include/asm/arch-at91/hardware.h +++ b/arch/arm/include/asm/arch-at91/hardware.h @@ -37,12 +37,14 @@ # include <asm/arch/at91sam9rl.h> #elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) # include <asm/arch/at91sam9g45.h> -#elif defined(CONFIG_AT91SAM9X5) +#elif defined(CONFIG_AT91SAM9N12) || defined(CONFIG_AT91SAM9X5) # include <asm/arch/at91sam9x5.h> #elif defined(CONFIG_AT91CAP9) # include <asm/arch/at91cap9.h> #elif defined(CONFIG_AT91X40) # include <asm/arch/at91x40.h> +#elif defined(CONFIG_SAMA5D3) +# include <asm/arch/sama5d3.h> #else # error "Unsupported AT91 processor" #endif diff --git a/arch/arm/include/asm/arch-at91/sama5d3.h b/arch/arm/include/asm/arch-at91/sama5d3.h new file mode 100644 index 0000000..883b932 --- /dev/null +++ b/arch/arm/include/asm/arch-at91/sama5d3.h @@ -0,0 +1,212 @@ +/* + * Chip-specific header file for the SAMA5D3 family + * + * (C) 2012 - 2013 Atmel Corporation. + * Bo Shen <voice.shen@atmel.com> + * + * Definitions for the SoC: + * SAMA5D3 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef SAMA5D3_H +#define SAMA5D3_H + +/* + * defines to be used in other places + */ +#define CONFIG_ARMV7 /* ARM A5 Core */ +#define CONFIG_AT91FAMILY /* it's a member of AT91 */ + +/* + * Peripheral identifiers/interrupts. + */ +#define ATMEL_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ +#define ATMEL_ID_SYS 1 /* System Controller Interrupt */ +#define ATMEL_ID_DBGU 2 /* Debug Unit Interrupt */ +#define ATMEL_ID_PIT 3 /* Periodic Interval Timer Interrupt */ +#define ATMEL_ID_WDT 4 /* Watchdog timer Interrupt */ +#define ATMEL_ID_SMC 5 /* Multi-bit ECC Interrupt */ +#define ATMEL_ID_PIOA 6 /* Parallel I/O Controller A */ +#define ATMEL_ID_PIOB 7 /* Parallel I/O Controller B */ +#define ATMEL_ID_PIOC 8 /* Parallel I/O Controller C */ +#define ATMEL_ID_PIOD 9 /* Parallel I/O Controller D */ +#define ATMEL_ID_PIOE 10 /* Parallel I/O Controller E */ +#define ATMEL_ID_SMD 11 /* SMD Soft Modem */ +#define ATMEL_ID_USART0 12 /* USART 0 */ +#define ATMEL_ID_USART1 13 /* USART 1 */ +#define ATMEL_ID_USART2 14 /* USART 2 */ +#define ATMEL_ID_USART3 15 /* USART 3 */ +#define ATMEL_ID_UART0 16 +#define ATMEL_ID_UART1 17 +#define ATMEL_ID_TWI0 18 /* Two-Wire Interface 0 */ +#define ATMEL_ID_TWI1 19 /* Two-Wire Interface 1 */ +#define ATMEL_ID_TWI2 20 /* Two-Wire Interface 2 */ +#define ATMEL_ID_MCI0 21 /* High Speed Multimedia Card Interface 0 */ +#define ATMEL_ID_MCI1 22 /* */ +#define ATMEL_ID_MCI2 23 /* */ +#define ATMEL_ID_SPI0 24 /* Serial Peripheral Interface 0 */ +#define ATMEL_ID_SPI1 25 /* Serial Peripheral Interface 1 */ +#define ATMEL_ID_TC0 26 /* */ +#define ATMEL_ID_TC1 27 /* */ +#define ATMEL_ID_PWMC 28 /* Pulse Width Modulation Controller */ +#define ATMEL_ID_TSC 29 /* Touch Screen ADC Controller */ +#define ATMEL_ID_DMA0 30 /* DMA Controller */ +#define ATMEL_ID_DMA1 31 /* DMA Controller */ +#define ATMEL_ID_UHPHS 32 /* USB Host High Speed */ +#define ATMEL_ID_UDPHS 33 /* USB Device High Speed */ +#define ATMEL_ID_GMAC 34 +#define ATMEL_ID_EMAC 35 /* Ethernet MAC */ +#define ATMEL_ID_LCDC 36 /* LCD Controller */ +#define ATMEL_ID_ISI 37 /* Image Sensor Interface */ +#define ATMEL_ID_SSC0 38 /* Synchronous Serial Controller 0 */ +#define ATMEL_ID_SSC1 39 /* Synchronous Serial Controller 1 */ +#define ATMEL_ID_CAN0 40 +#define ATMEL_ID_CAN1 41 +#define ATMEL_ID_SHA 42 +#define ATMEL_ID_AES 43 +#define ATMEL_ID_TDES 44 +#define ATMEL_ID_TRNG 45 +#define ATMEL_ID_ARM 46 +#define ATMEL_ID_IRQ0 47 /* Advanced Interrupt Controller */ +#define ATMEL_ID_FUSE 48 +#define ATMEL_ID_MPDDRC 49 + +/* sama5d3 series chip id definitions */ +#define ARCH_ID_SAMA5D3 0x8a5c07c0 +#define ARCH_EXID_SAMA5D31 0x00444300 +#define ARCH_EXID_SAMA5D33 0x00414300 +#define ARCH_EXID_SAMA5D34 0x00414301 +#define ARCH_EXID_SAMA5D35 0x00584300 + +#define cpu_is_sama5d3() (get_chip_id() == ARCH_ID_SAMA5D3) +#define cpu_is_sama5d31() (cpu_is_sama5d3() && \ + (get_extension_chip_id() == ARCH_EXID_SAMA5D31)) +#define cpu_is_sama5d33() (cpu_is_sama5d3() && \ + (get_extension_chip_id() == ARCH_EXID_SAMA5D33)) +#define cpu_is_sama5d34() (cpu_is_sama5d3() && \ + (get_extension_chip_id() == ARCH_EXID_SAMA5D34)) +#define cpu_is_sama5d35() (cpu_is_sama5d3() && \ + (get_extension_chip_id() == ARCH_EXID_SAMA5D35)) + +/* + * User Peripherals physical base addresses. + */ +#define ATMEL_BASE_MCI0 0xf0000000 +#define ATMEL_BASE_SPI0 0xf0004000 +#define ATMEL_BASE_SSC0 0xf000C000 +#define ATMEL_BASE_TC2 0xf0010000 +#define ATMEL_BASE_TWI0 0xf0014000 +#define ATMEL_BASE_TWI1 0xf0018000 +#define ATMEL_BASE_USART0 0xf001c000 +#define ATMEL_BASE_USART1 0xf0020000 +#define ATMEL_BASE_UART0 0xf0024000 +#define ATMEL_BASE_GMAC 0xf0028000 +#define ATMEL_BASE_PWMC 0xf002c000 +#define ATMEL_BASE_LCDC 0xf0030000 +#define ATMEL_BASE_ISI 0xf0034000 +#define ATMEL_BASE_SFR 0xf0038000 +/* Reserved: 0xf003c000 - 0xf8000000 */ +#define ATMEL_BASE_MCI1 0xf8000000 +#define ATMEL_BASE_MCI2 0xf8004000 +#define ATMEL_BASE_SPI1 0xf8008000 +#define ATMEL_BASE_SSC1 0xf800c000 +#define ATMEL_BASE_CAN1 0xf8010000 +#define ATMEL_BASE_TC3 0xf8014000 +#define ATMEL_BASE_TSADC 0xf8018000 +#define ATMEL_BASE_TWI2 0xf801c000 +#define ATMEL_BASE_USART2 0xf8020000 +#define ATMEL_BASE_USART3 0xf8024000 +#define ATMEL_BASE_UART1 0xf8028000 +#define ATMEL_BASE_EMAC 0xf802c000 +#define ATMEL_BASE_UDHPS 0xf8030000 +#define ATMEL_BASE_SHA 0xf8034000 +#define ATMEL_BASE_AES 0xf8038000 +#define ATMEL_BASE_TDES 0xf803c000 +#define ATMEL_BASE_TRNG 0xf8040000 +/* Reserved: 0xf804400 - 0xffffc00 */ + +/* + * System Peripherals physical base addresses. + */ +#define ATMEL_BASE_SYS 0xffffc000 +#define ATMEL_BASE_SMC 0xffffc000 +#define ATMEL_BASE_PMECC (ATMEL_BASE_SMC + 0x070) +#define ATMEL_BASE_PMERRLOC (ATMEL_BASE_SMC + 0x500) +#define ATMEL_BASE_FUSE 0xffffe400 +#define ATMEL_BASE_DMAC0 0xffffe600 +#define ATMEL_BASE_DMAC1 0xffffe800 +#define ATMEL_BASE_MPDDRC 0xffffea00 +#define ATMEL_BASE_MATRIX 0xffffec00 +#define ATMEL_BASE_DBGU 0xffffee00 +#define ATMEL_BASE_AIC 0xfffff000 +#define ATMEL_BASE_PIOA 0xfffff200 +#define ATMEL_BASE_PIOB 0xfffff400 +#define ATMEL_BASE_PIOC 0xfffff600 +#define ATMEL_BASE_PIOD 0xfffff800 +#define ATMEL_BASE_PIOE 0xfffffa00 +#define ATMEL_BASE_PMC 0xfffffc00 +#define ATMEL_BASE_RSTC 0xfffffe00 +#define ATMEL_BASE_SHDWN 0xfffffe10 +#define ATMEL_BASE_PIT 0xfffffe30 +#define ATMEL_BASE_WDT 0xfffffe40 +#define ATMEL_BASE_SCKCR 0xfffffe50 +#define ATMEL_BASE_GPBR 0xfffffe60 +#define ATMEL_BASE_RTC 0xfffffeb0 +/* Reserved: 0xfffffee0 - 0xffffffff */ + +/* + * Internal Memory. + */ +#define ATMEL_BASE_ROM 0x00100000 /* Internal ROM base address */ +#define ATMEL_BASE_SRAM 0x00200000 /* Internal ROM base address */ +#define ATMEL_BASE_SRAM0 0x00300000 /* Internal SRAM base address */ +#define ATMEL_BASE_SRAM1 0x00310000 /* Internal SRAM base address */ +#define ATMEL_BASE_SMD 0x00400000 /* Internal ROM base address */ +#define ATMEL_BASE_UDPHS_FIFO 0x00500000 /* USB Device HS controller */ +#define ATMEL_BASE_OHCI 0x00600000 /* USB Host controller (OHCI) */ +#define ATMEL_BASE_EHCI 0x00700000 /* USB Host controller (EHCI) */ +#define ATMEL_BASE_AXI 0x00800000 /* Video Decoder Controller */ +#define ATMEL_BASE_DAP 0x00900000 /* Video Decoder Controller */ + +/* + * External memory + */ +#define ATMEL_BASE_CS0 0x10000000 +#define ATMEL_BASE_DDRCS 0x20000000 +#define ATMEL_BASE_CS1 0x40000000 +#define ATMEL_BASE_CS2 0x50000000 +#define ATMEL_BASE_CS3 0x60000000 + +/* + * Other misc defines + */ +#define ATMEL_PIO_PORTS 5 +#define CPU_HAS_PIO3 +#define PIO_SCDR_DIV 0x3fff + +/* + * PMECC table in ROM + */ +#define ATMEL_PMECC_INDEX_OFFSET_512 0x10000 +#define ATMEL_PMECC_INDEX_OFFSET_1024 0x18000 +#define ATMEL_PMECC_ALPHA_OFFSET_512 0x10000 +#define ATMEL_PMECC_ALPHA_OFFSET_1024 0x18000 + +/* + * SAMA5D3 specific prototypes + */ +#ifndef __ASSEMBLY__ +unsigned int get_chip_id(void); +unsigned int get_extension_chip_id(void); +unsigned int has_emac(void); +unsigned int has_gmac(void); +unsigned int has_lcdc(void); +char *get_cpu_name(void); +#endif + +#endif diff --git a/arch/arm/include/asm/arch-at91/sama5d3_smc.h b/arch/arm/include/asm/arch-at91/sama5d3_smc.h new file mode 100644 index 0000000..eb53eba --- /dev/null +++ b/arch/arm/include/asm/arch-at91/sama5d3_smc.h @@ -0,0 +1,79 @@ +/* + * Copyright (C) 2012 Atmel Corporation. + * + * Static Memory Controllers (SMC) - System peripherals registers. + * Based on SAMA5D3 datasheet. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef SAMA5D3_SMC_H +#define SAMA5D3_SMC_H + +#ifdef __ASSEMBLY__ +#define AT91_ASM_SMC_SETUP0 (ATMEL_BASE_SMC + 0x600) +#define AT91_ASM_SMC_PULSE0 (ATMEL_BASE_SMC + 0x604) +#define AT91_ASM_SMC_CYCLE0 (ATMEL_BASE_SMC + 0x608) +#define AT91_ASM_SMC_MODE0 (ATMEL_BASE_SMC + 0x60C) +#else +struct at91_cs { + u32 reserved[96]; + u32 setup; /* 0x600 SMC Setup Register */ + u32 pulse; /* 0x604 SMC Pulse Register */ + u32 cycle; /* 0x608 SMC Cycle Register */ + u32 timings; /* 0x60C SMC Cycle Register */ + u32 mode; /* 0x610 SMC Mode Register */ +}; + +struct at91_smc { + struct at91_cs cs[4]; +}; +#endif /* __ASSEMBLY__ */ + +#define AT91_SMC_SETUP_NWE(x) (x & 0x3f) +#define AT91_SMC_SETUP_NCS_WR(x) ((x & 0x3f) << 8) +#define AT91_SMC_SETUP_NRD(x) ((x & 0x3f) << 16) +#define AT91_SMC_SETUP_NCS_RD(x) ((x & 0x3f) << 24) + +#define AT91_SMC_PULSE_NWE(x) (x & 0x3f) +#define AT91_SMC_PULSE_NCS_WR(x) ((x & 0x3f) << 8) +#define AT91_SMC_PULSE_NRD(x) ((x & 0x3f) << 16) +#define AT91_SMC_PULSE_NCS_RD(x) ((x & 0x3f) << 24) + +#define AT91_SMC_CYCLE_NWE(x) (x & 0x1ff) +#define AT91_SMC_CYCLE_NRD(x) ((x & 0x1ff) << 16) + +#define AT91_SMC_TIMINGS_TCLR(x) (x & 0xf) +#define AT91_SMC_TIMINGS_TADL(x) ((x & 0xf) << 4) +#define AT91_SMC_TIMINGS_TAR(x) ((x & 0xf) << 8) +#define AT91_SMC_TIMINGS_OCMS(x) ((x & 0x1) << 12) +#define AT91_SMC_TIMINGS_TRR(x) ((x & 0xf) << 16) +#define AT91_SMC_TIMINGS_TWB(x) ((x & 0xf) << 24) +#define AT91_SMC_TIMINGS_RBNSEL(x) ((x & 0xf) << 28) +#define AT91_SMC_TIMINGS_NFSEL(x) ((x & 0x1) << 31) + +#define AT91_SMC_MODE_RM_NCS 0x00000000 +#define AT91_SMC_MODE_RM_NRD 0x00000001 +#define AT91_SMC_MODE_WM_NCS 0x00000000 +#define AT91_SMC_MODE_WM_NWE 0x00000002 + +#define AT91_SMC_MODE_EXNW_DISABLE 0x00000000 +#define AT91_SMC_MODE_EXNW_FROZEN 0x00000020 +#define AT91_SMC_MODE_EXNW_READY 0x00000030 + +#define AT91_SMC_MODE_BAT 0x00000100 +#define AT91_SMC_MODE_DBW_8 0x00000000 +#define AT91_SMC_MODE_DBW_16 0x00001000 +#define AT91_SMC_MODE_DBW_32 0x00002000 +#define AT91_SMC_MODE_TDF_CYCLE(x) ((x & 0xf) << 16) +#define AT91_SMC_MODE_TDF 0x00100000 +#define AT91_SMC_MODE_PMEN 0x01000000 +#define AT91_SMC_MODE_PS_4 0x00000000 +#define AT91_SMC_MODE_PS_8 0x10000000 +#define AT91_SMC_MODE_PS_16 0x20000000 +#define AT91_SMC_MODE_PS_32 0x30000000 + +#endif diff --git a/arch/arm/include/asm/arch-davinci/hardware.h b/arch/arm/include/asm/arch-davinci/hardware.h index 6eed6c9..a9017e4 100644 --- a/arch/arm/include/asm/arch-davinci/hardware.h +++ b/arch/arm/include/asm/arch-davinci/hardware.h @@ -346,6 +346,8 @@ void davinci_errata_workarounds(void); #define PSC_PSC0_MODULE_ID_CNT 16 #define PSC_PSC1_MODULE_ID_CNT 32 +#define UART0_PWREMU_MGMT (0x01c42030) + struct davinci_psc_regs { dv_reg revid; dv_reg rsvd0[71]; diff --git a/arch/arm/include/asm/arch-davinci/nand_defs.h b/arch/arm/include/asm/arch-davinci/nand_defs.h index 10f3a39..4a30813 100644 --- a/arch/arm/include/asm/arch-davinci/nand_defs.h +++ b/arch/arm/include/asm/arch-davinci/nand_defs.h @@ -36,6 +36,15 @@ #define MASK_ALE 0x08 #endif +#ifdef CONFIG_SYS_NAND_MASK_CLE +#undef MASK_CLE +#define MASK_CLE CONFIG_SYS_NAND_MASK_CLE +#endif +#ifdef CONFIG_SYS_NAND_MASK_ALE +#undef MASK_ALE +#define MASK_ALE CONFIG_SYS_NAND_MASK_ALE +#endif + #define NAND_READ_START 0x00 #define NAND_READ_END 0x30 #define NAND_STATUS 0x70 diff --git a/arch/arm/include/asm/arch-mx25/imx-regs.h b/arch/arm/include/asm/arch-mx25/imx-regs.h index 5f4b543..46f59d7 100644 --- a/arch/arm/include/asm/arch-mx25/imx-regs.h +++ b/arch/arm/include/asm/arch-mx25/imx-regs.h @@ -113,8 +113,12 @@ struct iim_regs { u32 iim_sdat; u32 iim_prev; u32 iim_srev; - u32 iim_prog_p; - u32 res1[0x1f5]; + u32 iim_prg_p; + u32 iim_scs0; + u32 iim_scs1; + u32 iim_scs2; + u32 iim_scs3; + u32 res1[0x1f1]; struct fuse_bank { u32 fuse_regs[0x20]; u32 fuse_rsvd[0xe0]; @@ -122,10 +126,19 @@ struct iim_regs { }; struct fuse_bank0_regs { - u32 fuse0_25[0x1a]; + u32 fuse0_7[8]; + u32 uid[8]; + u32 fuse16_25[0xa]; u32 mac_addr[6]; }; +struct fuse_bank1_regs { + u32 fuse0_21[0x16]; + u32 usr5; + u32 fuse23_29[7]; + u32 usr6[2]; +}; + /* Multi-Layer AHB Crossbar Switch (MAX) registers */ struct max_regs { u32 mpr0; @@ -187,6 +200,7 @@ struct aips_regs { #define IMX_CSPI1_BASE (0x43FA4000) #define IMX_KPP_BASE (0x43FA8000) #define IMX_IOPADMUX_BASE (0x43FAC000) +#define IOMUXC_BASE_ADDR IMX_IOPADMUX_BASE #define IMX_IOPADCTL_BASE (0x43FAC22C) #define IMX_IOPADGRPCTL_BASE (0x43FAC418) #define IMX_IOPADINPUTSEL_BASE (0x43FAC460) @@ -240,6 +254,7 @@ struct aips_regs { #define IMX_PWM1_BASE (0x53FE0000) #define IMX_RTIC_BASE (0x53FEC000) #define IMX_IIM_BASE (0x53FF0000) +#define IIM_BASE_ADDR IMX_IIM_BASE #define IMX_USB_BASE (0x53FF4000) #define IMX_USB_PORT_OFFSET 0x200 #define IMX_CSI_BASE (0x53FF8000) diff --git a/arch/arm/include/asm/arch-mx25/imx25-pinmux.h b/arch/arm/include/asm/arch-mx25/imx25-pinmux.h deleted file mode 100644 index a4c658b..0000000 --- a/arch/arm/include/asm/arch-mx25/imx25-pinmux.h +++ /dev/null @@ -1,421 +0,0 @@ -/* - * iopin settings are controlled by four different sets of registers - * iopad mux control - * individual iopad setup (voltage select, pull/keep, drive strength ...) - * group iopad setup (same as above but for groups of signals) - * input select when multiple inputs are possible - */ - -/* - * software pad mux control - */ -/* SW Input On (Loopback) */ -#define MX25_PIN_MUX_SION (1 << 4) -/* MUX Mode (0-7) */ -#define MX25_PIN_MUX_MODE(mode) ((mode & 0x7) << 0) -struct iomuxc_mux_ctl { - u32 gpr1; - u32 observe_int_mux; - u32 pad_a10; - u32 pad_a13; - u32 pad_a14; - u32 pad_a15; - u32 pad_a16; - u32 pad_a17; - u32 pad_a18; - u32 pad_a19; - u32 pad_a20; - u32 pad_a21; - u32 pad_a22; - u32 pad_a23; - u32 pad_a24; - u32 pad_a25; - u32 pad_eb0; - u32 pad_eb1; - u32 pad_oe; - u32 pad_cs0; - u32 pad_cs1; - u32 pad_cs4; - u32 pad_cs5; - u32 pad_nf_ce0; - u32 pad_ecb; - u32 pad_lba; - u32 pad_bclk; - u32 pad_rw; - u32 pad_nfwe_b; - u32 pad_nfre_b; - u32 pad_nfale; - u32 pad_nfcle; - u32 pad_nfwp_b; - u32 pad_nfrb; - u32 pad_d15; - u32 pad_d14; - u32 pad_d13; - u32 pad_d12; - u32 pad_d11; - u32 pad_d10; - u32 pad_d9; - u32 pad_d8; - u32 pad_d7; - u32 pad_d6; - u32 pad_d5; - u32 pad_d4; - u32 pad_d3; - u32 pad_d2; - u32 pad_d1; - u32 pad_d0; - u32 pad_ld0; - u32 pad_ld1; - u32 pad_ld2; - u32 pad_ld3; - u32 pad_ld4; - u32 pad_ld5; - u32 pad_ld6; - u32 pad_ld7; - u32 pad_ld8; - u32 pad_ld9; - u32 pad_ld10; - u32 pad_ld11; - u32 pad_ld12; - u32 pad_ld13; - u32 pad_ld14; - u32 pad_ld15; - u32 pad_hsync; - u32 pad_vsync; - u32 pad_lsclk; - u32 pad_oe_acd; - u32 pad_contrast; - u32 pad_pwm; - u32 pad_csi_d2; - u32 pad_csi_d3; - u32 pad_csi_d4; - u32 pad_csi_d5; - u32 pad_csi_d6; - u32 pad_csi_d7; - u32 pad_csi_d8; - u32 pad_csi_d9; - u32 pad_csi_mclk; - u32 pad_csi_vsync; - u32 pad_csi_hsync; - u32 pad_csi_pixclk; - u32 pad_i2c1_clk; - u32 pad_i2c1_dat; - u32 pad_cspi1_mosi; - u32 pad_cspi1_miso; - u32 pad_cspi1_ss0; - u32 pad_cspi1_ss1; - u32 pad_cspi1_sclk; - u32 pad_cspi1_rdy; - u32 pad_uart1_rxd; - u32 pad_uart1_txd; - u32 pad_uart1_rts; - u32 pad_uart1_cts; - u32 pad_uart2_rxd; - u32 pad_uart2_txd; - u32 pad_uart2_rts; - u32 pad_uart2_cts; - u32 pad_sd1_cmd; - u32 pad_sd1_clk; - u32 pad_sd1_data0; - u32 pad_sd1_data1; - u32 pad_sd1_data2; - u32 pad_sd1_data3; - u32 pad_kpp_row0; - u32 pad_kpp_row1; - u32 pad_kpp_row2; - u32 pad_kpp_row3; - u32 pad_kpp_col0; - u32 pad_kpp_col1; - u32 pad_kpp_col2; - u32 pad_kpp_col3; - u32 pad_fec_mdc; - u32 pad_fec_mdio; - u32 pad_fec_tdata0; - u32 pad_fec_tdata1; - u32 pad_fec_tx_en; - u32 pad_fec_rdata0; - u32 pad_fec_rdata1; - u32 pad_fec_rx_dv; - u32 pad_fec_tx_clk; - u32 pad_rtck; - u32 pad_de_b; - u32 pad_gpio_a; - u32 pad_gpio_b; - u32 pad_gpio_c; - u32 pad_gpio_d; - u32 pad_gpio_e; - u32 pad_gpio_f; - u32 pad_ext_armclk; - u32 pad_upll_bypclk; - u32 pad_vstby_req; - u32 pad_vstby_ack; - u32 pad_power_fail; - u32 pad_clko; - u32 pad_boot_mode0; - u32 pad_boot_mode1; -}; - -/* - * software pad control - */ -/* Select 3.3 or 1.8 volts */ -#define MX25_PIN_PAD_CTL_DVS_33 (0 << 13) -#define MX25_PIN_PAD_CTL_DVS_18 (1 << 13) -/* Enable hysteresis */ -#define MX25_PIN_PAD_CTL_HYS (1 << 8) -/* Enable pull/keeper */ -#define MX25_PIN_PAD_CTL_PKE (1 << 7) -/* 0 - keeper / 1 - pull */ -#define MX25_PIN_PAD_CTL_PUE (1 << 6) -/* pull up/down strength */ -#define MX25_PIN_PAD_CTL_100K_PD (0 << 4) -#define MX25_PIN_PAD_CTL_47K_PU (1 << 4) -#define MX25_PIN_PAD_CTL_100K_PU (2 << 4) -#define MX25_PIN_PAD_CTL_22K_PU (3 << 4) -/* open drain control */ -#define MX25_PIN_PAD_CTL_OD (1 << 3) -/* drive strength */ -#define MX25_PIN_PAD_CTL_DS_NOM (0 << 1) -#define MX25_PIN_PAD_CTL_DS_HIGH (1 << 1) -#define MX25_PIN_PAD_CTL_DS_MAX (2 << 1) -#define MX25_PIN_PAD_CTL_DS_MAX11 (3 << 1) -/* slew rate */ -#define MX25_PIN_PAD_CTL_SRE_SLOW (0 << 0) -#define MX25_PIN_PAD_CTL_SRE_FAST (1 << 0) -struct iomuxc_pad_ctl { - u32 pad_a13; - u32 pad_a14; - u32 pad_a15; - u32 pad_a17; - u32 pad_a18; - u32 pad_a19; - u32 pad_a20; - u32 pad_a21; - u32 pad_a23; - u32 pad_a24; - u32 pad_a25; - u32 pad_eb0; - u32 pad_eb1; - u32 pad_oe; - u32 pad_cs4; - u32 pad_cs5; - u32 pad_nf_ce0; - u32 pad_ecb; - u32 pad_lba; - u32 pad_rw; - u32 pad_nfrb; - u32 pad_d15; - u32 pad_d14; - u32 pad_d13; - u32 pad_d12; - u32 pad_d11; - u32 pad_d10; - u32 pad_d9; - u32 pad_d8; - u32 pad_d7; - u32 pad_d6; - u32 pad_d5; - u32 pad_d4; - u32 pad_d3; - u32 pad_d2; - u32 pad_d1; - u32 pad_d0; - u32 pad_ld0; - u32 pad_ld1; - u32 pad_ld2; - u32 pad_ld3; - u32 pad_ld4; - u32 pad_ld5; - u32 pad_ld6; - u32 pad_ld7; - u32 pad_ld8; - u32 pad_ld9; - u32 pad_ld10; - u32 pad_ld11; - u32 pad_ld12; - u32 pad_ld13; - u32 pad_ld14; - u32 pad_ld15; - u32 pad_hsync; - u32 pad_vsync; - u32 pad_lsclk; - u32 pad_oe_acd; - u32 pad_contrast; - u32 pad_pwm; - u32 pad_csi_d2; - u32 pad_csi_d3; - u32 pad_csi_d4; - u32 pad_csi_d5; - u32 pad_csi_d6; - u32 pad_csi_d7; - u32 pad_csi_d8; - u32 pad_csi_d9; - u32 pad_csi_mclk; - u32 pad_csi_vsync; - u32 pad_csi_hsync; - u32 pad_csi_pixclk; - u32 pad_i2c1_clk; - u32 pad_i2c1_dat; - u32 pad_cspi1_mosi; - u32 pad_cspi1_miso; - u32 pad_cspi1_ss0; - u32 pad_cspi1_ss1; - u32 pad_cspi1_sclk; - u32 pad_cspi1_rdy; - u32 pad_uart1_rxd; - u32 pad_uart1_txd; - u32 pad_uart1_rts; - u32 pad_uart1_cts; - u32 pad_uart2_rxd; - u32 pad_uart2_txd; - u32 pad_uart2_rts; - u32 pad_uart2_cts; - u32 pad_sd1_cmd; - u32 pad_sd1_clk; - u32 pad_sd1_data0; - u32 pad_sd1_data1; - u32 pad_sd1_data2; - u32 pad_sd1_data3; - u32 pad_kpp_row0; - u32 pad_kpp_row1; - u32 pad_kpp_row2; - u32 pad_kpp_row3; - u32 pad_kpp_col0; - u32 pad_kpp_col1; - u32 pad_kpp_col2; - u32 pad_kpp_col3; - u32 pad_fec_mdc; - u32 pad_fec_mdio; - u32 pad_fec_tdata0; - u32 pad_fec_tdata1; - u32 pad_fec_tx_en; - u32 pad_fec_rdata0; - u32 pad_fec_rdata1; - u32 pad_fec_rx_dv; - u32 pad_fec_tx_clk; - u32 pad_rtck; - u32 pad_tdo; - u32 pad_de_b; - u32 pad_gpio_a; - u32 pad_gpio_b; - u32 pad_gpio_c; - u32 pad_gpio_d; - u32 pad_gpio_e; - u32 pad_gpio_f; - u32 pad_vstby_req; - u32 pad_vstby_ack; - u32 pad_power_fail; - u32 pad_clko; -}; - - -/* - * Pad group drive strength and voltage select - * Same fields as iomuxc_pad_ctl plus ddr type - */ -/* Select DDR type */ -#define MX25_PIN_PAD_CTL_DDR_18 (0 << 11) -#define MX25_PIN_PAD_CTL_DDR_33 (1 << 11) -#define MX25_PIN_PAD_CTL_DDR_MAX (2 << 11) -struct iomuxc_pad_grp_ctl { - u32 grp_dvs_misc; - u32 grp_dse_fec; - u32 grp_dvs_jtag; - u32 grp_dse_nfc; - u32 grp_dse_csi; - u32 grp_dse_weim; - u32 grp_dse_ddr; - u32 grp_dvs_crm; - u32 grp_dse_kpp; - u32 grp_dse_sdhc1; - u32 grp_dse_lcd; - u32 grp_dse_uart; - u32 grp_dvs_nfc; - u32 grp_dvs_csi; - u32 grp_dse_cspi1; - u32 grp_ddrtype; - u32 grp_dvs_sdhc1; - u32 grp_dvs_lcd; -}; - -/* - * Pad input select control - * Select which pad to connect to an input port - * where multiple pads can function as given input - */ -#define MX25_PAD_INPUT_SELECT_DAISY(in) ((in & 0x7) << 0) -struct iomuxc_pad_input_select { - u32 audmux_p4_input_da_amx; - u32 audmux_p4_input_db_amx; - u32 audmux_p4_input_rxclk_amx; - u32 audmux_p4_input_rxfs_amx; - u32 audmux_p4_input_txclk_amx; - u32 audmux_p4_input_txfs_amx; - u32 audmux_p7_input_da_amx; - u32 audmux_p7_input_txfs_amx; - u32 can1_ipp_ind_canrx; - u32 can2_ipp_ind_canrx; - u32 csi_ipp_csi_d_0; - u32 csi_ipp_csi_d_1; - u32 cspi1_ipp_ind_ss3_b; - u32 cspi2_ipp_cspi_clk_in; - u32 cspi2_ipp_ind_dataready_b; - u32 cspi2_ipp_ind_miso; - u32 cspi2_ipp_ind_mosi; - u32 cspi2_ipp_ind_ss0_b; - u32 cspi2_ipp_ind_ss1_b; - u32 cspi3_ipp_cspi_clk_in; - u32 cspi3_ipp_ind_dataready_b; - u32 cspi3_ipp_ind_miso; - u32 cspi3_ipp_ind_mosi; - u32 cspi3_ipp_ind_ss0_b; - u32 cspi3_ipp_ind_ss1_b; - u32 cspi3_ipp_ind_ss2_b; - u32 cspi3_ipp_ind_ss3_b; - u32 esdhc1_ipp_dat4_in; - u32 esdhc1_ipp_dat5_in; - u32 esdhc1_ipp_dat6_in; - u32 esdhc1_ipp_dat7_in; - u32 esdhc2_ipp_card_clk_in; - u32 esdhc2_ipp_cmd_in; - u32 esdhc2_ipp_dat0_in; - u32 esdhc2_ipp_dat1_in; - u32 esdhc2_ipp_dat2_in; - u32 esdhc2_ipp_dat3_in; - u32 esdhc2_ipp_dat4_in; - u32 esdhc2_ipp_dat5_in; - u32 esdhc2_ipp_dat6_in; - u32 esdhc2_ipp_dat7_in; - u32 fec_fec_col; - u32 fec_fec_crs; - u32 fec_fec_rdata_2; - u32 fec_fec_rdata_3; - u32 fec_fec_rx_clk; - u32 fec_fec_rx_er; - u32 i2c2_ipp_scl_in; - u32 i2c2_ipp_sda_in; - u32 i2c3_ipp_scl_in; - u32 i2c3_ipp_sda_in; - u32 kpp_ipp_ind_col_4; - u32 kpp_ipp_ind_col_5; - u32 kpp_ipp_ind_col_6; - u32 kpp_ipp_ind_col_7; - u32 kpp_ipp_ind_row_4; - u32 kpp_ipp_ind_row_5; - u32 kpp_ipp_ind_row_6; - u32 kpp_ipp_ind_row_7; - u32 sim1_pin_sim_rcvd1_in; - u32 sim1_pin_sim_simpd1; - u32 sim1_sim_rcvd1_io; - u32 sim2_pin_sim_rcvd1_in; - u32 sim2_pin_sim_simpd1; - u32 sim2_sim_rcvd1_io; - u32 uart3_ipp_uart_rts_b; - u32 uart3_ipp_uart_rxd_mux; - u32 uart4_ipp_uart_rts_b; - u32 uart4_ipp_uart_rxd_mux; - u32 uart5_ipp_uart_rts_b; - u32 uart5_ipp_uart_rxd_mux; - u32 usb_top_ipp_ind_otg_usb_oc; - u32 usb_top_ipp_ind_uh2_usb_oc; -}; diff --git a/arch/arm/include/asm/arch-mx25/iomux-mx25.h b/arch/arm/include/asm/arch-mx25/iomux-mx25.h new file mode 100644 index 0000000..c0f5c61 --- /dev/null +++ b/arch/arm/include/asm/arch-mx25/iomux-mx25.h @@ -0,0 +1,545 @@ +/* + * (C) Copyright 2013 ADVANSEE + * Benoît Thébaudeau <benoit.thebaudeau@advansee.com> + * + * Based on mainline Linux i.MX iomux-mx25.h file: + * Copyright (C) 2009 by Lothar Wassmann <LW@KARO-electronics.de> + * + * Based on Linux arch/arm/mach-mx25/mx25_pins.h: + * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved. + * and Linux arch/arm/plat-mxc/include/mach/iomux-mx35.h: + * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __IOMUX_MX25_H__ +#define __IOMUX_MX25_H__ + +#include <asm/imx-common/iomux-v3.h> + +/* Pad control groupings */ +#define MX25_KPP_ROW_PAD_CTRL PAD_CTL_PUS_100K_UP +#define MX25_KPP_COL_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_ODE) + +/* + * The naming convention for the pad modes is MX25_PAD_<padname>__<padmode> + * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num> + * See also iomux-v3.h + */ + +/* PAD MUX ALT INPSE PATH PADCTRL */ +enum { + MX25_PAD_A10__A10 = IOMUX_PAD(0x000, 0x008, 0x00, 0, 0, NO_PAD_CTRL), + MX25_PAD_A10__GPIO_4_0 = IOMUX_PAD(0x000, 0x008, 0x05, 0, 0, NO_PAD_CTRL), + + MX25_PAD_A13__A13 = IOMUX_PAD(0x22C, 0x00c, 0x00, 0, 0, NO_PAD_CTRL), + MX25_PAD_A13__GPIO_4_1 = IOMUX_PAD(0x22C, 0x00c, 0x05, 0, 0, NO_PAD_CTRL), + + MX25_PAD_A14__A14 = IOMUX_PAD(0x230, 0x010, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_A14__GPIO_2_0 = IOMUX_PAD(0x230, 0x010, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_A15__A15 = IOMUX_PAD(0x234, 0x014, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_A15__GPIO_2_1 = IOMUX_PAD(0x234, 0x014, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_A16__A16 = IOMUX_PAD(0x000, 0x018, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_A16__GPIO_2_2 = IOMUX_PAD(0x000, 0x018, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_A17__A17 = IOMUX_PAD(0x238, 0x01c, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_A17__GPIO_2_3 = IOMUX_PAD(0x238, 0x01c, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_A18__A18 = IOMUX_PAD(0x23c, 0x020, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_A18__GPIO_2_4 = IOMUX_PAD(0x23c, 0x020, 0x15, 0, 0, NO_PAD_CTRL), + MX25_PAD_A18__FEC_COL = IOMUX_PAD(0x23c, 0x020, 0x17, 0x504, 0, NO_PAD_CTRL), + + MX25_PAD_A19__A19 = IOMUX_PAD(0x240, 0x024, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_A19__FEC_RX_ER = IOMUX_PAD(0x240, 0x024, 0x17, 0x518, 0, NO_PAD_CTRL), + MX25_PAD_A19__GPIO_2_5 = IOMUX_PAD(0x240, 0x024, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_A20__A20 = IOMUX_PAD(0x244, 0x028, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_A20__GPIO_2_6 = IOMUX_PAD(0x244, 0x028, 0x15, 0, 0, NO_PAD_CTRL), + MX25_PAD_A20__FEC_RDATA2 = IOMUX_PAD(0x244, 0x028, 0x17, 0x50c, 0, NO_PAD_CTRL), + + MX25_PAD_A21__A21 = IOMUX_PAD(0x248, 0x02c, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_A21__GPIO_2_7 = IOMUX_PAD(0x248, 0x02c, 0x15, 0, 0, NO_PAD_CTRL), + MX25_PAD_A21__FEC_RDATA3 = IOMUX_PAD(0x248, 0x02c, 0x17, 0x510, 0, NO_PAD_CTRL), + + MX25_PAD_A22__A22 = IOMUX_PAD(0x000, 0x030, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_A22__GPIO_2_8 = IOMUX_PAD(0x000, 0x030, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_A23__A23 = IOMUX_PAD(0x24c, 0x034, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_A23__GPIO_2_9 = IOMUX_PAD(0x24c, 0x034, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_A24__A24 = IOMUX_PAD(0x250, 0x038, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_A24__GPIO_2_10 = IOMUX_PAD(0x250, 0x038, 0x15, 0, 0, NO_PAD_CTRL), + MX25_PAD_A24__FEC_RX_CLK = IOMUX_PAD(0x250, 0x038, 0x17, 0x514, 0, NO_PAD_CTRL), + + MX25_PAD_A25__A25 = IOMUX_PAD(0x254, 0x03c, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_A25__GPIO_2_11 = IOMUX_PAD(0x254, 0x03c, 0x15, 0, 0, NO_PAD_CTRL), + MX25_PAD_A25__FEC_CRS = IOMUX_PAD(0x254, 0x03c, 0x17, 0x508, 0, NO_PAD_CTRL), + + MX25_PAD_EB0__EB0 = IOMUX_PAD(0x258, 0x040, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_EB0__AUD4_TXD = IOMUX_PAD(0x258, 0x040, 0x14, 0x464, 0, NO_PAD_CTRL), + MX25_PAD_EB0__GPIO_2_12 = IOMUX_PAD(0x258, 0x040, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_EB1__EB1 = IOMUX_PAD(0x25c, 0x044, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_EB1__AUD4_RXD = IOMUX_PAD(0x25c, 0x044, 0x14, 0x460, 0, NO_PAD_CTRL), + MX25_PAD_EB1__GPIO_2_13 = IOMUX_PAD(0x25c, 0x044, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_OE__OE = IOMUX_PAD(0x260, 0x048, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_OE__AUD4_TXC = IOMUX_PAD(0x260, 0x048, 0x14, 0, 0, NO_PAD_CTRL), + MX25_PAD_OE__GPIO_2_14 = IOMUX_PAD(0x260, 0x048, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_CS0__CS0 = IOMUX_PAD(0x000, 0x04c, 0x00, 0, 0, NO_PAD_CTRL), + MX25_PAD_CS0__GPIO_4_2 = IOMUX_PAD(0x000, 0x04c, 0x05, 0, 0, NO_PAD_CTRL), + + MX25_PAD_CS1__CS1 = IOMUX_PAD(0x000, 0x050, 0x00, 0, 0, NO_PAD_CTRL), + MX25_PAD_CS1__NF_CE3 = IOMUX_PAD(0x000, 0x050, 0x01, 0, 0, NO_PAD_CTRL), + MX25_PAD_CS1__GPIO_4_3 = IOMUX_PAD(0x000, 0x050, 0x05, 0, 0, NO_PAD_CTRL), + + MX25_PAD_CS4__CS4 = IOMUX_PAD(0x264, 0x054, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_CS4__NF_CE1 = IOMUX_PAD(0x264, 0x054, 0x01, 0, 0, NO_PAD_CTRL), + MX25_PAD_CS4__UART5_CTS = IOMUX_PAD(0x264, 0x054, 0x13, 0, 0, NO_PAD_CTRL), + MX25_PAD_CS4__GPIO_3_20 = IOMUX_PAD(0x264, 0x054, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_CS5__CS5 = IOMUX_PAD(0x268, 0x058, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_CS5__NF_CE2 = IOMUX_PAD(0x268, 0x058, 0x01, 0, 0, NO_PAD_CTRL), + MX25_PAD_CS5__UART5_RTS = IOMUX_PAD(0x268, 0x058, 0x13, 0x574, 0, NO_PAD_CTRL), + MX25_PAD_CS5__GPIO_3_21 = IOMUX_PAD(0x268, 0x058, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_NF_CE0__NF_CE0 = IOMUX_PAD(0x26c, 0x05c, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_NF_CE0__GPIO_3_22 = IOMUX_PAD(0x26c, 0x05c, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_ECB__ECB = IOMUX_PAD(0x270, 0x060, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_ECB__UART5_TXD_MUX = IOMUX_PAD(0x270, 0x060, 0x13, 0, 0, NO_PAD_CTRL), + MX25_PAD_ECB__GPIO_3_23 = IOMUX_PAD(0x270, 0x060, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_LBA__LBA = IOMUX_PAD(0x274, 0x064, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_LBA__UART5_RXD_MUX = IOMUX_PAD(0x274, 0x064, 0x13, 0x578, 0, NO_PAD_CTRL), + MX25_PAD_LBA__GPIO_3_24 = IOMUX_PAD(0x274, 0x064, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_BCLK__BCLK = IOMUX_PAD(0x000, 0x068, 0x00, 0, 0, NO_PAD_CTRL), + MX25_PAD_BCLK__GPIO_4_4 = IOMUX_PAD(0x000, 0x068, 0x05, 0, 0, NO_PAD_CTRL), + + MX25_PAD_RW__RW = IOMUX_PAD(0x278, 0x06c, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_RW__AUD4_TXFS = IOMUX_PAD(0x278, 0x06c, 0x14, 0x474, 0, NO_PAD_CTRL), + MX25_PAD_RW__GPIO_3_25 = IOMUX_PAD(0x278, 0x06c, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_NFWE_B__NFWE_B = IOMUX_PAD(0x000, 0x070, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_NFWE_B__GPIO_3_26 = IOMUX_PAD(0x000, 0x070, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_NFRE_B__NFRE_B = IOMUX_PAD(0x000, 0x074, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_NFRE_B__GPIO_3_27 = IOMUX_PAD(0x000, 0x074, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_NFALE__NFALE = IOMUX_PAD(0x000, 0x078, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_NFALE__GPIO_3_28 = IOMUX_PAD(0x000, 0x078, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_NFCLE__NFCLE = IOMUX_PAD(0x000, 0x07c, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_NFCLE__GPIO_3_29 = IOMUX_PAD(0x000, 0x07c, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_NFWP_B__NFWP_B = IOMUX_PAD(0x000, 0x080, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_NFWP_B__GPIO_3_30 = IOMUX_PAD(0x000, 0x080, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_NFRB__NFRB = IOMUX_PAD(0x27c, 0x084, 0x10, 0, 0, PAD_CTL_PKE), + MX25_PAD_NFRB__GPIO_3_31 = IOMUX_PAD(0x27c, 0x084, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_D15__D15 = IOMUX_PAD(0x280, 0x088, 0x00, 0, 0, NO_PAD_CTRL), + MX25_PAD_D15__LD16 = IOMUX_PAD(0x280, 0x088, 0x01, 0, 0, PAD_CTL_SRE_FAST), + MX25_PAD_D15__GPIO_4_5 = IOMUX_PAD(0x280, 0x088, 0x05, 0, 0, NO_PAD_CTRL), + + MX25_PAD_D14__D14 = IOMUX_PAD(0x284, 0x08c, 0x00, 0, 0, NO_PAD_CTRL), + MX25_PAD_D14__LD17 = IOMUX_PAD(0x284, 0x08c, 0x01, 0, 0, PAD_CTL_SRE_FAST), + MX25_PAD_D14__GPIO_4_6 = IOMUX_PAD(0x284, 0x08c, 0x05, 0, 0, NO_PAD_CTRL), + + MX25_PAD_D13__D13 = IOMUX_PAD(0x288, 0x090, 0x00, 0, 0, NO_PAD_CTRL), + MX25_PAD_D13__LD18 = IOMUX_PAD(0x288, 0x090, 0x01, 0, 0, PAD_CTL_SRE_FAST), + MX25_PAD_D13__GPIO_4_7 = IOMUX_PAD(0x288, 0x090, 0x05, 0, 0, NO_PAD_CTRL), + + MX25_PAD_D12__D12 = IOMUX_PAD(0x28c, 0x094, 0x00, 0, 0, NO_PAD_CTRL), + MX25_PAD_D12__GPIO_4_8 = IOMUX_PAD(0x28c, 0x094, 0x05, 0, 0, NO_PAD_CTRL), + + MX25_PAD_D11__D11 = IOMUX_PAD(0x290, 0x098, 0x00, 0, 0, NO_PAD_CTRL), + MX25_PAD_D11__GPIO_4_9 = IOMUX_PAD(0x290, 0x098, 0x05, 0, 0, NO_PAD_CTRL), + + MX25_PAD_D10__D10 = IOMUX_PAD(0x294, 0x09c, 0x00, 0, 0, NO_PAD_CTRL), + MX25_PAD_D10__GPIO_4_10 = IOMUX_PAD(0x294, 0x09c, 0x05, 0, 0, NO_PAD_CTRL), + MX25_PAD_D10__USBOTG_OC = IOMUX_PAD(0x294, 0x09c, 0x06, 0x57c, 0, PAD_CTL_PUS_100K_UP), + + MX25_PAD_D9__D9 = IOMUX_PAD(0x298, 0x0a0, 0x00, 0, 0, NO_PAD_CTRL), + MX25_PAD_D9__GPIO_4_11 = IOMUX_PAD(0x298, 0x0a0, 0x05, 0, 0, NO_PAD_CTRL), + MX25_PAD_D9__USBH2_PWR = IOMUX_PAD(0x298, 0x0a0, 0x06, 0, 0, PAD_CTL_PKE), + + MX25_PAD_D8__D8 = IOMUX_PAD(0x29c, 0x0a4, 0x00, 0, 0, NO_PAD_CTRL), + MX25_PAD_D8__GPIO_4_12 = IOMUX_PAD(0x29c, 0x0a4, 0x05, 0, 0, NO_PAD_CTRL), + MX25_PAD_D8__USBH2_OC = IOMUX_PAD(0x29c, 0x0a4, 0x06, 0x580, 0, PAD_CTL_PUS_100K_UP), + + MX25_PAD_D7__D7 = IOMUX_PAD(0x2a0, 0x0a8, 0x00, 0, 0, NO_PAD_CTRL), + MX25_PAD_D7__GPIO_4_13 = IOMUX_PAD(0x2a0, 0x0a8, 0x05, 0, 0, NO_PAD_CTRL), + + MX25_PAD_D6__D6 = IOMUX_PAD(0x2a4, 0x0ac, 0x00, 0, 0, NO_PAD_CTRL), + MX25_PAD_D6__GPIO_4_14 = IOMUX_PAD(0x2a4, 0x0ac, 0x05, 0, 0, NO_PAD_CTRL), + + MX25_PAD_D5__D5 = IOMUX_PAD(0x2a8, 0x0b0, 0x00, 0, 0, NO_PAD_CTRL), + MX25_PAD_D5__GPIO_4_15 = IOMUX_PAD(0x2a8, 0x0b0, 0x05, 0, 0, NO_PAD_CTRL), + + MX25_PAD_D4__D4 = IOMUX_PAD(0x2ac, 0x0b4, 0x00, 0, 0, NO_PAD_CTRL), + MX25_PAD_D4__GPIO_4_16 = IOMUX_PAD(0x2ac, 0x0b4, 0x05, 0, 0, NO_PAD_CTRL), + + MX25_PAD_D3__D3 = IOMUX_PAD(0x2b0, 0x0b8, 0x00, 0, 0, NO_PAD_CTRL), + MX25_PAD_D3__GPIO_4_17 = IOMUX_PAD(0x2b0, 0x0b8, 0x05, 0, 0, NO_PAD_CTRL), + + MX25_PAD_D2__D2 = IOMUX_PAD(0x2b4, 0x0bc, 0x00, 0, 0, NO_PAD_CTRL), + MX25_PAD_D2__GPIO_4_18 = IOMUX_PAD(0x2b4, 0x0bc, 0x05, 0, 0, NO_PAD_CTRL), + + MX25_PAD_D1__D1 = IOMUX_PAD(0x2b8, 0x0c0, 0x00, 0, 0, NO_PAD_CTRL), + MX25_PAD_D1__GPIO_4_19 = IOMUX_PAD(0x2b8, 0x0c0, 0x05, 0, 0, NO_PAD_CTRL), + + MX25_PAD_D0__D0 = IOMUX_PAD(0x2bc, 0x0c4, 0x00, 0, 0, NO_PAD_CTRL), + MX25_PAD_D0__GPIO_4_20 = IOMUX_PAD(0x2bc, 0x0c4, 0x05, 0, 0, NO_PAD_CTRL), + + MX25_PAD_LD0__LD0 = IOMUX_PAD(0x2c0, 0x0c8, 0x10, 0, 0, PAD_CTL_SRE_FAST), + MX25_PAD_LD0__CSI_D0 = IOMUX_PAD(0x2c0, 0x0c8, 0x12, 0x488, 0, NO_PAD_CTRL), + MX25_PAD_LD0__GPIO_2_15 = IOMUX_PAD(0x2c0, 0x0c8, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_LD1__LD1 = IOMUX_PAD(0x2c4, 0x0cc, 0x10, 0, 0, PAD_CTL_SRE_FAST), + MX25_PAD_LD1__CSI_D1 = IOMUX_PAD(0x2c4, 0x0cc, 0x12, 0x48c, 0, NO_PAD_CTRL), + MX25_PAD_LD1__GPIO_2_16 = IOMUX_PAD(0x2c4, 0x0cc, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_LD2__LD2 = IOMUX_PAD(0x2c8, 0x0d0, 0x10, 0, 0, PAD_CTL_SRE_FAST), + MX25_PAD_LD2__GPIO_2_17 = IOMUX_PAD(0x2c8, 0x0d0, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_LD3__LD3 = IOMUX_PAD(0x2cc, 0x0d4, 0x10, 0, 0, PAD_CTL_SRE_FAST), + MX25_PAD_LD3__GPIO_2_18 = IOMUX_PAD(0x2cc, 0x0d4, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_LD4__LD4 = IOMUX_PAD(0x2d0, 0x0d8, 0x10, 0, 0, PAD_CTL_SRE_FAST), + MX25_PAD_LD4__GPIO_2_19 = IOMUX_PAD(0x2d0, 0x0d8, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_LD5__LD5 = IOMUX_PAD(0x2d4, 0x0dc, 0x10, 0, 0, PAD_CTL_SRE_FAST), + MX25_PAD_LD5__GPIO_1_19 = IOMUX_PAD(0x2d4, 0x0dc, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_LD6__LD6 = IOMUX_PAD(0x2d8, 0x0e0, 0x10, 0, 0, PAD_CTL_SRE_FAST), + MX25_PAD_LD6__GPIO_1_20 = IOMUX_PAD(0x2d8, 0x0e0, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_LD7__LD7 = IOMUX_PAD(0x2dc, 0x0e4, 0x10, 0, 0, PAD_CTL_SRE_FAST), + MX25_PAD_LD7__GPIO_1_21 = IOMUX_PAD(0x2dc, 0x0e4, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_LD8__LD8 = IOMUX_PAD(0x2e0, 0x0e8, 0x10, 0, 0, PAD_CTL_SRE_FAST), + MX25_PAD_LD8__FEC_TX_ERR = IOMUX_PAD(0x2e0, 0x0e8, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_LD9__LD9 = IOMUX_PAD(0x2e4, 0x0ec, 0x10, 0, 0, PAD_CTL_SRE_FAST), + MX25_PAD_LD9__FEC_COL = IOMUX_PAD(0x2e4, 0x0ec, 0x15, 0x504, 1, NO_PAD_CTRL), + + MX25_PAD_LD10__LD10 = IOMUX_PAD(0x2e8, 0x0f0, 0x10, 0, 0, PAD_CTL_SRE_FAST), + MX25_PAD_LD10__FEC_RX_ER = IOMUX_PAD(0x2e8, 0x0f0, 0x15, 0x518, 1, NO_PAD_CTRL), + + MX25_PAD_LD11__LD11 = IOMUX_PAD(0x2ec, 0x0f4, 0x10, 0, 0, PAD_CTL_SRE_FAST), + MX25_PAD_LD11__FEC_RDATA2 = IOMUX_PAD(0x2ec, 0x0f4, 0x15, 0x50c, 1, NO_PAD_CTRL), + + MX25_PAD_LD12__LD12 = IOMUX_PAD(0x2f0, 0x0f8, 0x10, 0, 0, PAD_CTL_SRE_FAST), + MX25_PAD_LD12__FEC_RDATA3 = IOMUX_PAD(0x2f0, 0x0f8, 0x15, 0x510, 1, NO_PAD_CTRL), + + MX25_PAD_LD13__LD13 = IOMUX_PAD(0x2f4, 0x0fc, 0x10, 0, 0, PAD_CTL_SRE_FAST), + MX25_PAD_LD13__FEC_TDATA2 = IOMUX_PAD(0x2f4, 0x0fc, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_LD14__LD14 = IOMUX_PAD(0x2f8, 0x100, 0x10, 0, 0, PAD_CTL_SRE_FAST), + MX25_PAD_LD14__FEC_TDATA3 = IOMUX_PAD(0x2f8, 0x100, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_LD15__LD15 = IOMUX_PAD(0x2fc, 0x104, 0x10, 0, 0, PAD_CTL_SRE_FAST), + MX25_PAD_LD15__FEC_RX_CLK = IOMUX_PAD(0x2fc, 0x104, 0x15, 0x514, 1, NO_PAD_CTRL), + + MX25_PAD_HSYNC__HSYNC = IOMUX_PAD(0x300, 0x108, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_HSYNC__GPIO_1_22 = IOMUX_PAD(0x300, 0x108, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_VSYNC__VSYNC = IOMUX_PAD(0x304, 0x10c, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_VSYNC__GPIO_1_23 = IOMUX_PAD(0x304, 0x10c, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_LSCLK__LSCLK = IOMUX_PAD(0x308, 0x110, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_LSCLK__GPIO_1_24 = IOMUX_PAD(0x308, 0x110, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_OE_ACD__OE_ACD = IOMUX_PAD(0x30c, 0x114, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_OE_ACD__GPIO_1_25 = IOMUX_PAD(0x30c, 0x114, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_CONTRAST__CONTRAST = IOMUX_PAD(0x310, 0x118, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_CONTRAST__PWM4_PWMO = IOMUX_PAD(0x310, 0x118, 0x14, 0, 0, NO_PAD_CTRL), + MX25_PAD_CONTRAST__FEC_CRS = IOMUX_PAD(0x310, 0x118, 0x15, 0x508, 1, NO_PAD_CTRL), + + MX25_PAD_PWM__PWM = IOMUX_PAD(0x314, 0x11c, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_PWM__GPIO_1_26 = IOMUX_PAD(0x314, 0x11c, 0x15, 0, 0, NO_PAD_CTRL), + MX25_PAD_PWM__USBH2_OC = IOMUX_PAD(0x314, 0x11c, 0x16, 0x580, 1, PAD_CTL_PUS_100K_UP), + + MX25_PAD_CSI_D2__CSI_D2 = IOMUX_PAD(0x318, 0x120, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_CSI_D2__UART5_RXD_MUX = IOMUX_PAD(0x318, 0x120, 0x11, 0x578, 1, NO_PAD_CTRL), + MX25_PAD_CSI_D2__GPIO_1_27 = IOMUX_PAD(0x318, 0x120, 0x15, 0, 0, NO_PAD_CTRL), + MX25_PAD_CSI_D2__CSPI3_MOSI = IOMUX_PAD(0x318, 0x120, 0x17, 0, 0, NO_PAD_CTRL), + + MX25_PAD_CSI_D3__CSI_D3 = IOMUX_PAD(0x31c, 0x124, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_CSI_D3__GPIO_1_28 = IOMUX_PAD(0x31c, 0x124, 0x15, 0, 0, NO_PAD_CTRL), + MX25_PAD_CSI_D3__CSPI3_MISO = IOMUX_PAD(0x31c, 0x124, 0x17, 0x4b4, 1, NO_PAD_CTRL), + + MX25_PAD_CSI_D4__CSI_D4 = IOMUX_PAD(0x320, 0x128, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_CSI_D4__UART5_RTS = IOMUX_PAD(0x320, 0x128, 0x11, 0x574, 1, NO_PAD_CTRL), + MX25_PAD_CSI_D4__GPIO_1_29 = IOMUX_PAD(0x320, 0x128, 0x15, 0, 0, NO_PAD_CTRL), + MX25_PAD_CSI_D4__CSPI3_SCLK = IOMUX_PAD(0x320, 0x128, 0x17, 0, 0, NO_PAD_CTRL), + + MX25_PAD_CSI_D5__CSI_D5 = IOMUX_PAD(0x324, 0x12c, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_CSI_D5__GPIO_1_30 = IOMUX_PAD(0x324, 0x12c, 0x15, 0, 0, NO_PAD_CTRL), + MX25_PAD_CSI_D5__CSPI3_RDY = IOMUX_PAD(0x324, 0x12c, 0x17, 0, 0, NO_PAD_CTRL), + + MX25_PAD_CSI_D6__CSI_D6 = IOMUX_PAD(0x328, 0x130, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_CSI_D6__GPIO_1_31 = IOMUX_PAD(0x328, 0x130, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_CSI_D7__CSI_D7 = IOMUX_PAD(0x32c, 0x134, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_CSI_D7__GPIO_1_6 = IOMUX_PAD(0x32c, 0x134, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_CSI_D8__CSI_D8 = IOMUX_PAD(0x330, 0x138, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_CSI_D8__GPIO_1_7 = IOMUX_PAD(0x330, 0x138, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_CSI_D9__CSI_D9 = IOMUX_PAD(0x334, 0x13c, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_CSI_D9__GPIO_4_21 = IOMUX_PAD(0x334, 0x13c, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_CSI_MCLK__CSI_MCLK = IOMUX_PAD(0x338, 0x140, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_CSI_MCLK__GPIO_1_8 = IOMUX_PAD(0x338, 0x140, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_CSI_VSYNC__CSI_VSYNC = IOMUX_PAD(0x33c, 0x144, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_CSI_VSYNC__GPIO_1_9 = IOMUX_PAD(0x33c, 0x144, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_CSI_HSYNC__CSI_HSYNC = IOMUX_PAD(0x340, 0x148, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_CSI_HSYNC__GPIO_1_10 = IOMUX_PAD(0x340, 0x148, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_CSI_PIXCLK__CSI_PIXCLK = IOMUX_PAD(0x344, 0x14c, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_CSI_PIXCLK__GPIO_1_11 = IOMUX_PAD(0x344, 0x14c, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_I2C1_CLK__I2C1_CLK = IOMUX_PAD(0x348, 0x150, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_I2C1_CLK__GPIO_1_12 = IOMUX_PAD(0x348, 0x150, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_I2C1_DAT__I2C1_DAT = IOMUX_PAD(0x34c, 0x154, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_I2C1_DAT__GPIO_1_13 = IOMUX_PAD(0x34c, 0x154, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_CSPI1_MOSI__CSPI1_MOSI = IOMUX_PAD(0x350, 0x158, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_CSPI1_MOSI__GPIO_1_14 = IOMUX_PAD(0x350, 0x158, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_CSPI1_MISO__CSPI1_MISO = IOMUX_PAD(0x354, 0x15c, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_CSPI1_MISO__GPIO_1_15 = IOMUX_PAD(0x354, 0x15c, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_CSPI1_SS0__CSPI1_SS0 = IOMUX_PAD(0x358, 0x160, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_CSPI1_SS0__GPIO_1_16 = IOMUX_PAD(0x358, 0x160, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_CSPI1_SS1__CSPI1_SS1 = IOMUX_PAD(0x35c, 0x164, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_CSPI1_SS1__I2C3_DAT = IOMUX_PAD(0x35c, 0x164, 0x11, 0x528, 1, NO_PAD_CTRL), + MX25_PAD_CSPI1_SS1__GPIO_1_17 = IOMUX_PAD(0x35c, 0x164, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_CSPI1_SCLK__CSPI1_SCLK = IOMUX_PAD(0x360, 0x168, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_CSPI1_SCLK__GPIO_1_18 = IOMUX_PAD(0x360, 0x168, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_CSPI1_RDY__CSPI1_RDY = IOMUX_PAD(0x364, 0x16c, 0x10, 0, 0, PAD_CTL_PKE), + MX25_PAD_CSPI1_RDY__GPIO_2_22 = IOMUX_PAD(0x364, 0x16c, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_UART1_RXD__UART1_RXD = IOMUX_PAD(0x368, 0x170, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN), + MX25_PAD_UART1_RXD__GPIO_4_22 = IOMUX_PAD(0x368, 0x170, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_UART1_TXD__UART1_TXD = IOMUX_PAD(0x36c, 0x174, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_UART1_TXD__GPIO_4_23 = IOMUX_PAD(0x36c, 0x174, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_UART1_RTS__UART1_RTS = IOMUX_PAD(0x370, 0x178, 0x10, 0, 0, PAD_CTL_PUS_100K_UP), + MX25_PAD_UART1_RTS__CSI_D0 = IOMUX_PAD(0x370, 0x178, 0x11, 0x488, 1, NO_PAD_CTRL), + MX25_PAD_UART1_RTS__GPIO_4_24 = IOMUX_PAD(0x370, 0x178, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_UART1_CTS__UART1_CTS = IOMUX_PAD(0x374, 0x17c, 0x10, 0, 0, PAD_CTL_PUS_100K_UP), + MX25_PAD_UART1_CTS__CSI_D1 = IOMUX_PAD(0x374, 0x17c, 0x11, 0x48c, 1, NO_PAD_CTRL), + MX25_PAD_UART1_CTS__GPIO_4_25 = IOMUX_PAD(0x374, 0x17c, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_UART2_RXD__UART2_RXD = IOMUX_PAD(0x378, 0x180, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_UART2_RXD__GPIO_4_26 = IOMUX_PAD(0x378, 0x180, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_UART2_TXD__UART2_TXD = IOMUX_PAD(0x37c, 0x184, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_UART2_TXD__GPIO_4_27 = IOMUX_PAD(0x37c, 0x184, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_UART2_RTS__UART2_RTS = IOMUX_PAD(0x380, 0x188, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_UART2_RTS__FEC_COL = IOMUX_PAD(0x380, 0x188, 0x12, 0x504, 2, NO_PAD_CTRL), + MX25_PAD_UART2_RTS__GPIO_4_28 = IOMUX_PAD(0x380, 0x188, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_UART2_CTS__FEC_RX_ER = IOMUX_PAD(0x384, 0x18c, 0x12, 0x518, 2, NO_PAD_CTRL), + MX25_PAD_UART2_CTS__UART2_CTS = IOMUX_PAD(0x384, 0x18c, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_UART2_CTS__GPIO_4_29 = IOMUX_PAD(0x384, 0x18c, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_SD1_CMD__SD1_CMD = IOMUX_PAD(0x388, 0x190, 0x10, 0, 0, PAD_CTL_PUS_47K_UP), + MX25_PAD_SD1_CMD__FEC_RDATA2 = IOMUX_PAD(0x388, 0x190, 0x12, 0x50c, 2, NO_PAD_CTRL), + MX25_PAD_SD1_CMD__GPIO_2_23 = IOMUX_PAD(0x388, 0x190, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_SD1_CLK__SD1_CLK = IOMUX_PAD(0x38c, 0x194, 0x10, 0, 0, PAD_CTL_PUS_47K_UP), + MX25_PAD_SD1_CLK__FEC_RDATA3 = IOMUX_PAD(0x38c, 0x194, 0x12, 0x510, 2, NO_PAD_CTRL), + MX25_PAD_SD1_CLK__GPIO_2_24 = IOMUX_PAD(0x38c, 0x194, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_SD1_DATA0__SD1_DATA0 = IOMUX_PAD(0x390, 0x198, 0x10, 0, 0, PAD_CTL_PUS_47K_UP), + MX25_PAD_SD1_DATA0__GPIO_2_25 = IOMUX_PAD(0x390, 0x198, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_SD1_DATA1__SD1_DATA1 = IOMUX_PAD(0x394, 0x19c, 0x10, 0, 0, PAD_CTL_PUS_47K_UP), + MX25_PAD_SD1_DATA1__AUD7_RXD = IOMUX_PAD(0x394, 0x19c, 0x13, 0x478, 0, NO_PAD_CTRL), + MX25_PAD_SD1_DATA1__GPIO_2_26 = IOMUX_PAD(0x394, 0x19c, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_SD1_DATA2__SD1_DATA2 = IOMUX_PAD(0x398, 0x1a0, 0x10, 0, 0, PAD_CTL_PUS_47K_UP), + MX25_PAD_SD1_DATA2__FEC_RX_CLK = IOMUX_PAD(0x398, 0x1a0, 0x15, 0x514, 2, NO_PAD_CTRL), + MX25_PAD_SD1_DATA2__GPIO_2_27 = IOMUX_PAD(0x398, 0x1a0, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_SD1_DATA3__SD1_DATA3 = IOMUX_PAD(0x39c, 0x1a4, 0x10, 0, 0, PAD_CTL_PUS_47K_UP), + MX25_PAD_SD1_DATA3__FEC_CRS = IOMUX_PAD(0x39c, 0x1a4, 0x10, 0x508, 2, NO_PAD_CTRL), + MX25_PAD_SD1_DATA3__GPIO_2_28 = IOMUX_PAD(0x39c, 0x1a4, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_KPP_ROW0__KPP_ROW0 = IOMUX_PAD(0x3a0, 0x1a8, 0x10, 0, 0, MX25_KPP_ROW_PAD_CTRL), + MX25_PAD_KPP_ROW0__GPIO_2_29 = IOMUX_PAD(0x3a0, 0x1a8, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_KPP_ROW1__KPP_ROW1 = IOMUX_PAD(0x3a4, 0x1ac, 0x10, 0, 0, MX25_KPP_ROW_PAD_CTRL), + MX25_PAD_KPP_ROW1__GPIO_2_30 = IOMUX_PAD(0x3a4, 0x1ac, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_KPP_ROW2__KPP_ROW2 = IOMUX_PAD(0x3a8, 0x1b0, 0x10, 0, 0, MX25_KPP_ROW_PAD_CTRL), + MX25_PAD_KPP_ROW2__CSI_D0 = IOMUX_PAD(0x3a8, 0x1b0, 0x13, 0x488, 2, NO_PAD_CTRL), + MX25_PAD_KPP_ROW2__GPIO_2_31 = IOMUX_PAD(0x3a8, 0x1b0, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_KPP_ROW3__KPP_ROW3 = IOMUX_PAD(0x3ac, 0x1b4, 0x10, 0, 0, MX25_KPP_ROW_PAD_CTRL), + MX25_PAD_KPP_ROW3__CSI_LD1 = IOMUX_PAD(0x3ac, 0x1b4, 0x13, 0x48c, 2, NO_PAD_CTRL), + MX25_PAD_KPP_ROW3__GPIO_3_0 = IOMUX_PAD(0x3ac, 0x1b4, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_KPP_COL0__KPP_COL0 = IOMUX_PAD(0x3b0, 0x1b8, 0x10, 0, 0, MX25_KPP_COL_PAD_CTRL), + MX25_PAD_KPP_COL0__UART4_RXD_MUX = IOMUX_PAD(0x3b0, 0x1b8, 0x11, 0x570, 1, NO_PAD_CTRL), + MX25_PAD_KPP_COL0__AUD5_TXD = IOMUX_PAD(0x3b0, 0x1b8, 0x12, 0, 0, PAD_CTL_PUS_100K_UP), + MX25_PAD_KPP_COL0__GPIO_3_1 = IOMUX_PAD(0x3b0, 0x1b8, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_KPP_COL1__KPP_COL1 = IOMUX_PAD(0x3b4, 0x1bc, 0x10, 0, 0, MX25_KPP_COL_PAD_CTRL), + MX25_PAD_KPP_COL1__UART4_TXD_MUX = IOMUX_PAD(0x3b4, 0x1bc, 0x11, 0, 0, NO_PAD_CTRL), + MX25_PAD_KPP_COL1__AUD5_RXD = IOMUX_PAD(0x3b4, 0x1bc, 0x12, 0, 0, PAD_CTL_PUS_100K_UP), + MX25_PAD_KPP_COL1__GPIO_3_2 = IOMUX_PAD(0x3b4, 0x1bc, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_KPP_COL2__KPP_COL2 = IOMUX_PAD(0x3b8, 0x1c0, 0x10, 0, 0, MX25_KPP_COL_PAD_CTRL), + MX25_PAD_KPP_COL2__UART4_RTS = IOMUX_PAD(0x3b8, 0x1c0, 0x11, 0, 0, NO_PAD_CTRL), + MX25_PAD_KPP_COL2__AUD5_TXC = IOMUX_PAD(0x3b8, 0x1c0, 0x12, 0, 0, PAD_CTL_PUS_100K_UP), + MX25_PAD_KPP_COL2__GPIO_3_3 = IOMUX_PAD(0x3b8, 0x1c0, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_KPP_COL3__KPP_COL3 = IOMUX_PAD(0x3bc, 0x1c4, 0x10, 0, 0, MX25_KPP_COL_PAD_CTRL), + MX25_PAD_KPP_COL3__UART4_CTS = IOMUX_PAD(0x3bc, 0x1c4, 0x11, 0, 0, NO_PAD_CTRL), + MX25_PAD_KPP_COL3__AUD5_TXFS = IOMUX_PAD(0x3bc, 0x1c4, 0x12, 0, 0, PAD_CTL_PUS_100K_UP), + MX25_PAD_KPP_COL3__GPIO_3_4 = IOMUX_PAD(0x3bc, 0x1c4, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_FEC_MDC__FEC_MDC = IOMUX_PAD(0x3c0, 0x1c8, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_FEC_MDC__AUD4_TXD = IOMUX_PAD(0x3c0, 0x1c8, 0x12, 0x464, 1, NO_PAD_CTRL), + MX25_PAD_FEC_MDC__GPIO_3_5 = IOMUX_PAD(0x3c0, 0x1c8, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_FEC_MDIO__FEC_MDIO = IOMUX_PAD(0x3c4, 0x1cc, 0x10, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_22K_UP), + MX25_PAD_FEC_MDIO__AUD4_RXD = IOMUX_PAD(0x3c4, 0x1cc, 0x12, 0x460, 1, NO_PAD_CTRL), + MX25_PAD_FEC_MDIO__GPIO_3_6 = IOMUX_PAD(0x3c4, 0x1cc, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_FEC_TDATA0__FEC_TDATA0 = IOMUX_PAD(0x3c8, 0x1d0, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_FEC_TDATA0__GPIO_3_7 = IOMUX_PAD(0x3c8, 0x1d0, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_FEC_TDATA1__FEC_TDATA1 = IOMUX_PAD(0x3cc, 0x1d4, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_FEC_TDATA1__AUD4_TXFS = IOMUX_PAD(0x3cc, 0x1d4, 0x12, 0x474, 1, NO_PAD_CTRL), + MX25_PAD_FEC_TDATA1__GPIO_3_8 = IOMUX_PAD(0x3cc, 0x1d4, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_FEC_TX_EN__FEC_TX_EN = IOMUX_PAD(0x3d0, 0x1d8, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_FEC_TX_EN__GPIO_3_9 = IOMUX_PAD(0x3d0, 0x1d8, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_FEC_RDATA0__FEC_RDATA0 = IOMUX_PAD(0x3d4, 0x1dc, 0x10, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN), + MX25_PAD_FEC_RDATA0__GPIO_3_10 = IOMUX_PAD(0x3d4, 0x1dc, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_FEC_RDATA1__FEC_RDATA1 = IOMUX_PAD(0x3d8, 0x1e0, 0x10, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN), + MX25_PAD_FEC_RDATA1__GPIO_3_11 = IOMUX_PAD(0x3d8, 0x1e0, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_FEC_RX_DV__FEC_RX_DV = IOMUX_PAD(0x3dc, 0x1e4, 0x10, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN), + MX25_PAD_FEC_RX_DV__CAN2_RX = IOMUX_PAD(0x3dc, 0x1e4, 0x14, 0x484, 0, PAD_CTL_PUS_22K_UP), + MX25_PAD_FEC_RX_DV__GPIO_3_12 = IOMUX_PAD(0x3dc, 0x1e4, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_FEC_TX_CLK__FEC_TX_CLK = IOMUX_PAD(0x3e0, 0x1e8, 0x10, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN), + MX25_PAD_FEC_TX_CLK__GPIO_3_13 = IOMUX_PAD(0x3e0, 0x1e8, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_RTCK__RTCK = IOMUX_PAD(0x3e4, 0x1ec, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_RTCK__OWIRE = IOMUX_PAD(0x3e4, 0x1ec, 0x11, 0, 0, NO_PAD_CTRL), + MX25_PAD_RTCK__GPIO_3_14 = IOMUX_PAD(0x3e4, 0x1ec, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_DE_B__DE_B = IOMUX_PAD(0x3ec, 0x1f0, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_DE_B__GPIO_2_20 = IOMUX_PAD(0x3ec, 0x1f0, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_TDO__TDO = IOMUX_PAD(0x3e8, 0x000, 0x00, 0, 0, NO_PAD_CTRL), + + MX25_PAD_GPIO_A__GPIO_A = IOMUX_PAD(0x3f0, 0x1f4, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_GPIO_A__CAN1_TX = IOMUX_PAD(0x3f0, 0x1f4, 0x16, 0, 0, PAD_CTL_PUS_22K_UP), + MX25_PAD_GPIO_A__USBOTG_PWR = IOMUX_PAD(0x3f0, 0x1f4, 0x12, 0, 0, PAD_CTL_PKE), + + MX25_PAD_GPIO_B__GPIO_B = IOMUX_PAD(0x3f4, 0x1f8, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_GPIO_B__CAN1_RX = IOMUX_PAD(0x3f4, 0x1f8, 0x16, 0x480, 1, PAD_CTL_PUS_22K_UP), + MX25_PAD_GPIO_B__USBOTG_OC = IOMUX_PAD(0x3f4, 0x1f8, 0x12, 0x57c, 1, PAD_CTL_PUS_100K_UP), + + MX25_PAD_GPIO_C__GPIO_C = IOMUX_PAD(0x3f8, 0x1fc, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_GPIO_C__CAN2_TX = IOMUX_PAD(0x3f8, 0x1fc, 0x16, 0, 0, PAD_CTL_PUS_22K_UP), + + MX25_PAD_GPIO_D__GPIO_D = IOMUX_PAD(0x3fc, 0x200, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_GPIO_E__LD16 = IOMUX_PAD(0x400, 0x204, 0x02, 0, 0, PAD_CTL_SRE_FAST), + MX25_PAD_GPIO_D__CAN2_RX = IOMUX_PAD(0x3fc, 0x200, 0x16, 0x484, 1, PAD_CTL_PUS_22K_UP), + + MX25_PAD_GPIO_E__GPIO_E = IOMUX_PAD(0x400, 0x204, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_GPIO_F__LD17 = IOMUX_PAD(0x404, 0x208, 0x02, 0, 0, PAD_CTL_SRE_FAST), + MX25_PAD_GPIO_E__I2C3_CLK = IOMUX_PAD(0x400, 0x204, 0x11, 0x524, 2, NO_PAD_CTRL), + MX25_PAD_GPIO_E__AUD7_TXD = IOMUX_PAD(0x400, 0x204, 0x14, 0, 0, NO_PAD_CTRL), + + MX25_PAD_GPIO_F__GPIO_F = IOMUX_PAD(0x404, 0x208, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_GPIO_F__AUD7_TXC = IOMUX_PAD(0x404, 0x208, 0x14, 0, 0, NO_PAD_CTRL), + + MX25_PAD_EXT_ARMCLK__EXT_ARMCLK = IOMUX_PAD(0x000, 0x20c, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_EXT_ARMCLK__GPIO_3_15 = IOMUX_PAD(0x000, 0x20c, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_UPLL_BYPCLK__UPLL_BYPCLK = IOMUX_PAD(0x000, 0x210, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_UPLL_BYPCLK__GPIO_3_16 = IOMUX_PAD(0x000, 0x210, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_VSTBY_REQ__VSTBY_REQ = IOMUX_PAD(0x408, 0x214, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_VSTBY_REQ__AUD7_TXFS = IOMUX_PAD(0x408, 0x214, 0x14, 0, 0, NO_PAD_CTRL), + MX25_PAD_VSTBY_REQ__GPIO_3_17 = IOMUX_PAD(0x408, 0x214, 0x15, 0, 0, NO_PAD_CTRL), + MX25_PAD_VSTBY_ACK__VSTBY_ACK = IOMUX_PAD(0x40c, 0x218, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_VSTBY_ACK__GPIO_3_18 = IOMUX_PAD(0x40c, 0x218, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_POWER_FAIL__POWER_FAIL = IOMUX_PAD(0x410, 0x21c, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_POWER_FAIL__AUD7_RXD = IOMUX_PAD(0x410, 0x21c, 0x14, 0x478, 1, NO_PAD_CTRL), + MX25_PAD_POWER_FAIL__GPIO_3_19 = IOMUX_PAD(0x410, 0x21c, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_CLKO__CLKO = IOMUX_PAD(0x414, 0x220, 0x10, 0, 0, NO_PAD_CTRL), + MX25_PAD_CLKO__GPIO_2_21 = IOMUX_PAD(0x414, 0x220, 0x15, 0, 0, NO_PAD_CTRL), + + MX25_PAD_BOOT_MODE0__BOOT_MODE0 = IOMUX_PAD(0x000, 0x224, 0x00, 0, 0, NO_PAD_CTRL), + MX25_PAD_BOOT_MODE0__GPIO_4_30 = IOMUX_PAD(0x000, 0x224, 0x05, 0, 0, NO_PAD_CTRL), + MX25_PAD_BOOT_MODE1__BOOT_MODE1 = IOMUX_PAD(0x000, 0x228, 0x00, 0, 0, NO_PAD_CTRL), + MX25_PAD_BOOT_MODE1__GPIO_4_31 = IOMUX_PAD(0x000, 0x228, 0x05, 0, 0, NO_PAD_CTRL), + + MX25_PAD_CTL_GRP_DVS_MISC = IOMUX_PAD(0x418, 0x000, 0, 0, 0, NO_PAD_CTRL), + MX25_PAD_CTL_GRP_DSE_FEC = IOMUX_PAD(0x41c, 0x000, 0, 0, 0, NO_PAD_CTRL), + MX25_PAD_CTL_GRP_DVS_JTAG = IOMUX_PAD(0x420, 0x000, 0, 0, 0, NO_PAD_CTRL), + MX25_PAD_CTL_GRP_DSE_NFC = IOMUX_PAD(0x424, 0x000, 0, 0, 0, NO_PAD_CTRL), + MX25_PAD_CTL_GRP_DSE_CSI = IOMUX_PAD(0x428, 0x000, 0, 0, 0, NO_PAD_CTRL), + MX25_PAD_CTL_GRP_DSE_WEIM = IOMUX_PAD(0x42c, 0x000, 0, 0, 0, NO_PAD_CTRL), + MX25_PAD_CTL_GRP_DSE_DDR = IOMUX_PAD(0x430, 0x000, 0, 0, 0, NO_PAD_CTRL), + MX25_PAD_CTL_GRP_DVS_CRM = IOMUX_PAD(0x434, 0x000, 0, 0, 0, NO_PAD_CTRL), + MX25_PAD_CTL_GRP_DSE_KPP = IOMUX_PAD(0x438, 0x000, 0, 0, 0, NO_PAD_CTRL), + MX25_PAD_CTL_GRP_DSE_SDHC1 = IOMUX_PAD(0x43c, 0x000, 0, 0, 0, NO_PAD_CTRL), + MX25_PAD_CTL_GRP_DSE_LCD = IOMUX_PAD(0x440, 0x000, 0, 0, 0, NO_PAD_CTRL), + MX25_PAD_CTL_GRP_DSE_UART = IOMUX_PAD(0x444, 0x000, 0, 0, 0, NO_PAD_CTRL), + MX25_PAD_CTL_GRP_DVS_NFC = IOMUX_PAD(0x448, 0x000, 0, 0, 0, NO_PAD_CTRL), + MX25_PAD_CTL_GRP_DVS_CSI = IOMUX_PAD(0x44c, 0x000, 0, 0, 0, NO_PAD_CTRL), + MX25_PAD_CTL_GRP_DSE_CSPI1 = IOMUX_PAD(0x450, 0x000, 0, 0, 0, NO_PAD_CTRL), + MX25_PAD_CTL_GRP_DDRTYPE = IOMUX_PAD(0x454, 0x000, 0, 0, 0, NO_PAD_CTRL), + MX25_PAD_CTL_GRP_DVS_SDHC1 = IOMUX_PAD(0x458, 0x000, 0, 0, 0, NO_PAD_CTRL), + MX25_PAD_CTL_GRP_DVS_LCD = IOMUX_PAD(0x45c, 0x000, 0, 0, 0, NO_PAD_CTRL), +}; + +#endif /* __IOMUX_MX25_H__ */ diff --git a/arch/arm/include/asm/arch-mx27/imx-regs.h b/arch/arm/include/asm/arch-mx27/imx-regs.h index 2f6c823..8867e9f 100644 --- a/arch/arm/include/asm/arch-mx27/imx-regs.h +++ b/arch/arm/include/asm/arch-mx27/imx-regs.h @@ -176,7 +176,7 @@ struct iim_regs { u32 iim_sdat; u32 iim_prev; u32 iim_srev; - u32 iim_prog_p; + u32 iim_prg_p; u32 iim_scs0; u32 iim_scs1; u32 iim_scs2; @@ -222,6 +222,7 @@ struct fuse_bank0_regs { #define IMX_PLL_BASE (0x27000 + IMX_IO_BASE) #define IMX_SYSTEM_CTL_BASE (0x27800 + IMX_IO_BASE) #define IMX_IIM_BASE (0x28000 + IMX_IO_BASE) +#define IIM_BASE_ADDR IMX_IIM_BASE #define IMX_FEC_BASE (0x2b000 + IMX_IO_BASE) #define IMX_ESD_BASE (0xD8001000) diff --git a/arch/arm/include/asm/arch-mx31/imx-regs.h b/arch/arm/include/asm/arch-mx31/imx-regs.h index 3f58318..67fddac 100644 --- a/arch/arm/include/asm/arch-mx31/imx-regs.h +++ b/arch/arm/include/asm/arch-mx31/imx-regs.h @@ -68,7 +68,7 @@ struct cspi_regs { u32 test; }; -/* IIM Control Registers */ +/* IIM control registers */ struct iim_regs { u32 iim_stat; u32 iim_statm; @@ -80,11 +80,28 @@ struct iim_regs { u32 iim_sdat; u32 iim_prev; u32 iim_srev; - u32 iim_prog_p; + u32 iim_prg_p; u32 iim_scs0; u32 iim_scs1; u32 iim_scs2; u32 iim_scs3; + u32 res[0x1f1]; + struct fuse_bank { + u32 fuse_regs[0x20]; + u32 fuse_rsvd[0xe0]; + } bank[3]; +}; + +struct fuse_bank0_regs { + u32 fuse0_5[6]; + u32 usr; + u32 fuse7_15[9]; +}; + +struct fuse_bank2_regs { + u32 fuse0; + u32 uid[8]; + u32 fuse9_15[7]; }; struct iomuxc_regs { @@ -557,6 +574,7 @@ struct esdc_regs { #define CCMR_CKIH (2 << 1) #define MX31_IIM_BASE_ADDR 0x5001C000 +#define IIM_BASE_ADDR MX31_IIM_BASE_ADDR #define PDR0_CSI_PODF(x) (((x) & 0x3f) << 26) #define PDR0_CSI_PRDF(x) (((x) & 0x7) << 23) diff --git a/arch/arm/include/asm/arch-mx35/imx-regs.h b/arch/arm/include/asm/arch-mx35/imx-regs.h index 7f337be..63c6e24 100644 --- a/arch/arm/include/asm/arch-mx35/imx-regs.h +++ b/arch/arm/include/asm/arch-mx35/imx-regs.h @@ -262,11 +262,28 @@ struct iim_regs { u32 iim_sdat; u32 iim_prev; u32 iim_srev; - u32 iim_prog_p; + u32 iim_prg_p; u32 iim_scs0; u32 iim_scs1; u32 iim_scs2; u32 iim_scs3; + u32 res1[0x1f1]; + struct fuse_bank { + u32 fuse_regs[0x20]; + u32 fuse_rsvd[0xe0]; + } bank[3]; +}; + +struct fuse_bank0_regs { + u32 fuse0_7[8]; + u32 uid[8]; + u32 fuse16_31[0x10]; +}; + +struct fuse_bank1_regs { + u32 fuse0_21[0x16]; + u32 usr; + u32 fuse23_31[9]; }; /* General Purpose Timer (GPT) registers */ diff --git a/arch/arm/include/asm/arch-mx35/iomux-mx35.h b/arch/arm/include/asm/arch-mx35/iomux-mx35.h new file mode 100644 index 0000000..8016cb3 --- /dev/null +++ b/arch/arm/include/asm/arch-mx35/iomux-mx35.h @@ -0,0 +1,1276 @@ +/* + * (C) Copyright 2013 ADVANSEE + * Benoît Thébaudeau <benoit.thebaudeau@advansee.com> + * + * Based on mainline Linux i.MX iomux-mx35.h file: + * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __IOMUX_MX35_H__ +#define __IOMUX_MX35_H__ + +#include <asm/imx-common/iomux-v3.h> + +/* + * The naming convention for the pad modes is MX35_PAD_<padname>__<padmode> + * If <padname> or <padmode> refers to a GPIO, it is named GPIO<unit>_<num> + * See also iomux-v3.h + */ + +/* PAD MUX ALT INPSE PATH PADCTRL */ +enum { + MX35_PAD_CAPTURE__GPT_CAPIN1 = IOMUX_PAD(0x328, 0x004, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_CAPTURE__GPT_CMPOUT2 = IOMUX_PAD(0x328, 0x004, 1, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_CAPTURE__CSPI2_SS1 = IOMUX_PAD(0x328, 0x004, 2, 0x7f4, 0, NO_PAD_CTRL), + MX35_PAD_CAPTURE__EPIT1_EPITO = IOMUX_PAD(0x328, 0x004, 3, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_CAPTURE__CCM_CLK32K = IOMUX_PAD(0x328, 0x004, 4, 0x7d0, 0, NO_PAD_CTRL), + MX35_PAD_CAPTURE__GPIO1_4 = IOMUX_PAD(0x328, 0x004, 5, 0x850, 0, NO_PAD_CTRL), + + MX35_PAD_COMPARE__GPT_CMPOUT1 = IOMUX_PAD(0x32c, 0x008, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_COMPARE__GPT_CAPIN2 = IOMUX_PAD(0x32c, 0x008, 1, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_COMPARE__GPT_CMPOUT3 = IOMUX_PAD(0x32c, 0x008, 2, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_COMPARE__EPIT2_EPITO = IOMUX_PAD(0x32c, 0x008, 3, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_COMPARE__GPIO1_5 = IOMUX_PAD(0x32c, 0x008, 5, 0x854, 0, NO_PAD_CTRL), + MX35_PAD_COMPARE__SDMA_EXTDMA_2 = IOMUX_PAD(0x32c, 0x008, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_WDOG_RST__WDOG_WDOG_B = IOMUX_PAD(0x330, 0x00c, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_WDOG_RST__IPU_FLASH_STROBE = IOMUX_PAD(0x330, 0x00c, 3, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_WDOG_RST__GPIO1_6 = IOMUX_PAD(0x330, 0x00c, 5, 0x858, 0, NO_PAD_CTRL), + + MX35_PAD_GPIO1_0__GPIO1_0 = IOMUX_PAD(0x334, 0x010, 0, 0x82c, 0, NO_PAD_CTRL), + MX35_PAD_GPIO1_0__CCM_PMIC_RDY = IOMUX_PAD(0x334, 0x010, 1, 0x7d4, 0, NO_PAD_CTRL), + MX35_PAD_GPIO1_0__OWIRE_LINE = IOMUX_PAD(0x334, 0x010, 2, 0x990, 0, NO_PAD_CTRL), + MX35_PAD_GPIO1_0__SDMA_EXTDMA_0 = IOMUX_PAD(0x334, 0x010, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_GPIO1_1__GPIO1_1 = IOMUX_PAD(0x338, 0x014, 0, 0x838, 0, NO_PAD_CTRL), + MX35_PAD_GPIO1_1__PWM_PWMO = IOMUX_PAD(0x338, 0x014, 2, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_GPIO1_1__CSPI1_SS2 = IOMUX_PAD(0x338, 0x014, 3, 0x7d8, 0, NO_PAD_CTRL), + MX35_PAD_GPIO1_1__SCC_TAMPER_DETECT = IOMUX_PAD(0x338, 0x014, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_GPIO1_1__SDMA_EXTDMA_1 = IOMUX_PAD(0x338, 0x014, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_GPIO2_0__GPIO2_0 = IOMUX_PAD(0x33c, 0x018, 0, 0x868, 0, NO_PAD_CTRL), + MX35_PAD_GPIO2_0__USB_TOP_USBOTG_CLK = IOMUX_PAD(0x33c, 0x018, 1, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_GPIO3_0__GPIO3_0 = IOMUX_PAD(0x340, 0x01c, 0, 0x8e8, 0, NO_PAD_CTRL), + MX35_PAD_GPIO3_0__USB_TOP_USBH2_CLK = IOMUX_PAD(0x340, 0x01c, 1, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_RESET_IN_B__CCM_RESET_IN_B = IOMUX_PAD(0x344, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_POR_B__CCM_POR_B = IOMUX_PAD(0x348, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_CLKO__CCM_CLKO = IOMUX_PAD(0x34c, 0x020, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_CLKO__GPIO1_8 = IOMUX_PAD(0x34c, 0x020, 5, 0x860, 0, NO_PAD_CTRL), + + MX35_PAD_BOOT_MODE0__CCM_BOOT_MODE_0 = IOMUX_PAD(0x350, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_BOOT_MODE1__CCM_BOOT_MODE_1 = IOMUX_PAD(0x354, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_CLK_MODE0__CCM_CLK_MODE_0 = IOMUX_PAD(0x358, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_CLK_MODE1__CCM_CLK_MODE_1 = IOMUX_PAD(0x35c, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_POWER_FAIL__CCM_DSM_WAKEUP_INT_26 = IOMUX_PAD(0x360, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_VSTBY__CCM_VSTBY = IOMUX_PAD(0x364, 0x024, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_VSTBY__GPIO1_7 = IOMUX_PAD(0x364, 0x024, 5, 0x85c, 0, NO_PAD_CTRL), + + MX35_PAD_A0__EMI_EIM_DA_L_0 = IOMUX_PAD(0x368, 0x028, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_A1__EMI_EIM_DA_L_1 = IOMUX_PAD(0x36c, 0x02c, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_A2__EMI_EIM_DA_L_2 = IOMUX_PAD(0x370, 0x030, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_A3__EMI_EIM_DA_L_3 = IOMUX_PAD(0x374, 0x034, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_A4__EMI_EIM_DA_L_4 = IOMUX_PAD(0x378, 0x038, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_A5__EMI_EIM_DA_L_5 = IOMUX_PAD(0x37c, 0x03c, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_A6__EMI_EIM_DA_L_6 = IOMUX_PAD(0x380, 0x040, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_A7__EMI_EIM_DA_L_7 = IOMUX_PAD(0x384, 0x044, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_A8__EMI_EIM_DA_H_8 = IOMUX_PAD(0x388, 0x048, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_A9__EMI_EIM_DA_H_9 = IOMUX_PAD(0x38c, 0x04c, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_A10__EMI_EIM_DA_H_10 = IOMUX_PAD(0x390, 0x050, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_MA10__EMI_MA10 = IOMUX_PAD(0x394, 0x054, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_A11__EMI_EIM_DA_H_11 = IOMUX_PAD(0x398, 0x058, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_A12__EMI_EIM_DA_H_12 = IOMUX_PAD(0x39c, 0x05c, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_A13__EMI_EIM_DA_H_13 = IOMUX_PAD(0x3a0, 0x060, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_A14__EMI_EIM_DA_H2_14 = IOMUX_PAD(0x3a4, 0x064, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_A15__EMI_EIM_DA_H2_15 = IOMUX_PAD(0x3a8, 0x068, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_A16__EMI_EIM_A_16 = IOMUX_PAD(0x3ac, 0x06c, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_A17__EMI_EIM_A_17 = IOMUX_PAD(0x3b0, 0x070, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_A18__EMI_EIM_A_18 = IOMUX_PAD(0x3b4, 0x074, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_A19__EMI_EIM_A_19 = IOMUX_PAD(0x3b8, 0x078, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_A20__EMI_EIM_A_20 = IOMUX_PAD(0x3bc, 0x07c, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_A21__EMI_EIM_A_21 = IOMUX_PAD(0x3c0, 0x080, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_A22__EMI_EIM_A_22 = IOMUX_PAD(0x3c4, 0x084, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_A23__EMI_EIM_A_23 = IOMUX_PAD(0x3c8, 0x088, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_A24__EMI_EIM_A_24 = IOMUX_PAD(0x3cc, 0x08c, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_A25__EMI_EIM_A_25 = IOMUX_PAD(0x3d0, 0x090, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SDBA1__EMI_EIM_SDBA1 = IOMUX_PAD(0x3d4, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SDBA0__EMI_EIM_SDBA0 = IOMUX_PAD(0x3d8, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SD0__EMI_DRAM_D_0 = IOMUX_PAD(0x3dc, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SD1__EMI_DRAM_D_1 = IOMUX_PAD(0x3e0, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SD2__EMI_DRAM_D_2 = IOMUX_PAD(0x3e4, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SD3__EMI_DRAM_D_3 = IOMUX_PAD(0x3e8, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SD4__EMI_DRAM_D_4 = IOMUX_PAD(0x3ec, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SD5__EMI_DRAM_D_5 = IOMUX_PAD(0x3f0, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SD6__EMI_DRAM_D_6 = IOMUX_PAD(0x3f4, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SD7__EMI_DRAM_D_7 = IOMUX_PAD(0x3f8, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SD8__EMI_DRAM_D_8 = IOMUX_PAD(0x3fc, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SD9__EMI_DRAM_D_9 = IOMUX_PAD(0x400, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SD10__EMI_DRAM_D_10 = IOMUX_PAD(0x404, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SD11__EMI_DRAM_D_11 = IOMUX_PAD(0x408, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SD12__EMI_DRAM_D_12 = IOMUX_PAD(0x40c, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SD13__EMI_DRAM_D_13 = IOMUX_PAD(0x410, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SD14__EMI_DRAM_D_14 = IOMUX_PAD(0x414, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SD15__EMI_DRAM_D_15 = IOMUX_PAD(0x418, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SD16__EMI_DRAM_D_16 = IOMUX_PAD(0x41c, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SD17__EMI_DRAM_D_17 = IOMUX_PAD(0x420, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SD18__EMI_DRAM_D_18 = IOMUX_PAD(0x424, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SD19__EMI_DRAM_D_19 = IOMUX_PAD(0x428, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SD20__EMI_DRAM_D_20 = IOMUX_PAD(0x42c, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SD21__EMI_DRAM_D_21 = IOMUX_PAD(0x430, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SD22__EMI_DRAM_D_22 = IOMUX_PAD(0x434, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SD23__EMI_DRAM_D_23 = IOMUX_PAD(0x438, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SD24__EMI_DRAM_D_24 = IOMUX_PAD(0x43c, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SD25__EMI_DRAM_D_25 = IOMUX_PAD(0x440, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SD26__EMI_DRAM_D_26 = IOMUX_PAD(0x444, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SD27__EMI_DRAM_D_27 = IOMUX_PAD(0x448, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SD28__EMI_DRAM_D_28 = IOMUX_PAD(0x44c, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SD29__EMI_DRAM_D_29 = IOMUX_PAD(0x450, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SD30__EMI_DRAM_D_30 = IOMUX_PAD(0x454, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SD31__EMI_DRAM_D_31 = IOMUX_PAD(0x458, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_DQM0__EMI_DRAM_DQM_0 = IOMUX_PAD(0x45c, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_DQM1__EMI_DRAM_DQM_1 = IOMUX_PAD(0x460, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_DQM2__EMI_DRAM_DQM_2 = IOMUX_PAD(0x464, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_DQM3__EMI_DRAM_DQM_3 = IOMUX_PAD(0x468, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_EB0__EMI_EIM_EB0_B = IOMUX_PAD(0x46c, 0x094, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_EB1__EMI_EIM_EB1_B = IOMUX_PAD(0x470, 0x098, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_OE__EMI_EIM_OE = IOMUX_PAD(0x474, 0x09c, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_CS0__EMI_EIM_CS0 = IOMUX_PAD(0x478, 0x0a0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_CS1__EMI_EIM_CS1 = IOMUX_PAD(0x47c, 0x0a4, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_CS1__EMI_NANDF_CE3 = IOMUX_PAD(0x47c, 0x0a4, 3, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_CS2__EMI_EIM_CS2 = IOMUX_PAD(0x480, 0x0a8, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_CS3__EMI_EIM_CS3 = IOMUX_PAD(0x484, 0x0ac, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_CS4__EMI_EIM_CS4 = IOMUX_PAD(0x488, 0x0b0, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_CS4__EMI_DTACK_B = IOMUX_PAD(0x488, 0x0b0, 1, 0x800, 0, NO_PAD_CTRL), + MX35_PAD_CS4__EMI_NANDF_CE1 = IOMUX_PAD(0x488, 0x0b0, 3, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_CS4__GPIO1_20 = IOMUX_PAD(0x488, 0x0b0, 5, 0x83c, 0, NO_PAD_CTRL), + + MX35_PAD_CS5__EMI_EIM_CS5 = IOMUX_PAD(0x48c, 0x0b4, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_CS5__CSPI2_SS2 = IOMUX_PAD(0x48c, 0x0b4, 1, 0x7f8, 0, NO_PAD_CTRL), + MX35_PAD_CS5__CSPI1_SS2 = IOMUX_PAD(0x48c, 0x0b4, 2, 0x7d8, 1, NO_PAD_CTRL), + MX35_PAD_CS5__EMI_NANDF_CE2 = IOMUX_PAD(0x48c, 0x0b4, 3, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_CS5__GPIO1_21 = IOMUX_PAD(0x48c, 0x0b4, 5, 0x840, 0, NO_PAD_CTRL), + + MX35_PAD_NF_CE0__EMI_NANDF_CE0 = IOMUX_PAD(0x490, 0x0b8, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_NF_CE0__GPIO1_22 = IOMUX_PAD(0x490, 0x0b8, 5, 0x844, 0, NO_PAD_CTRL), + + MX35_PAD_ECB__EMI_EIM_ECB = IOMUX_PAD(0x494, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_LBA__EMI_EIM_LBA = IOMUX_PAD(0x498, 0x0bc, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_BCLK__EMI_EIM_BCLK = IOMUX_PAD(0x49c, 0x0c0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_RW__EMI_EIM_RW = IOMUX_PAD(0x4a0, 0x0c4, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_RAS__EMI_DRAM_RAS = IOMUX_PAD(0x4a4, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_CAS__EMI_DRAM_CAS = IOMUX_PAD(0x4a8, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SDWE__EMI_DRAM_SDWE = IOMUX_PAD(0x4ac, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SDCKE0__EMI_DRAM_SDCKE_0 = IOMUX_PAD(0x4b0, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SDCKE1__EMI_DRAM_SDCKE_1 = IOMUX_PAD(0x4b4, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SDCLK__EMI_DRAM_SDCLK = IOMUX_PAD(0x4b8, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SDQS0__EMI_DRAM_SDQS_0 = IOMUX_PAD(0x4bc, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SDQS1__EMI_DRAM_SDQS_1 = IOMUX_PAD(0x4c0, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SDQS2__EMI_DRAM_SDQS_2 = IOMUX_PAD(0x4c4, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SDQS3__EMI_DRAM_SDQS_3 = IOMUX_PAD(0x4c8, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_NFWE_B__EMI_NANDF_WE_B = IOMUX_PAD(0x4cc, 0x0c8, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_NFWE_B__USB_TOP_USBH2_DATA_3 = IOMUX_PAD(0x4cc, 0x0c8, 1, 0x9d8, 0, NO_PAD_CTRL), + MX35_PAD_NFWE_B__IPU_DISPB_D0_VSYNC = IOMUX_PAD(0x4cc, 0x0c8, 2, 0x924, 0, NO_PAD_CTRL), + MX35_PAD_NFWE_B__GPIO2_18 = IOMUX_PAD(0x4cc, 0x0c8, 5, 0x88c, 0, NO_PAD_CTRL), + MX35_PAD_NFWE_B__ARM11P_TOP_TRACE_0 = IOMUX_PAD(0x4cc, 0x0c8, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_NFRE_B__EMI_NANDF_RE_B = IOMUX_PAD(0x4d0, 0x0cc, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_NFRE_B__USB_TOP_USBH2_DIR = IOMUX_PAD(0x4d0, 0x0cc, 1, 0x9ec, 0, NO_PAD_CTRL), + MX35_PAD_NFRE_B__IPU_DISPB_BCLK = IOMUX_PAD(0x4d0, 0x0cc, 2, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_NFRE_B__GPIO2_19 = IOMUX_PAD(0x4d0, 0x0cc, 5, 0x890, 0, NO_PAD_CTRL), + MX35_PAD_NFRE_B__ARM11P_TOP_TRACE_1 = IOMUX_PAD(0x4d0, 0x0cc, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_NFALE__EMI_NANDF_ALE = IOMUX_PAD(0x4d4, 0x0d0, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_NFALE__USB_TOP_USBH2_STP = IOMUX_PAD(0x4d4, 0x0d0, 1, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_NFALE__IPU_DISPB_CS0 = IOMUX_PAD(0x4d4, 0x0d0, 2, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_NFALE__GPIO2_20 = IOMUX_PAD(0x4d4, 0x0d0, 5, 0x898, 0, NO_PAD_CTRL), + MX35_PAD_NFALE__ARM11P_TOP_TRACE_2 = IOMUX_PAD(0x4d4, 0x0d0, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_NFCLE__EMI_NANDF_CLE = IOMUX_PAD(0x4d8, 0x0d4, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_NFCLE__USB_TOP_USBH2_NXT = IOMUX_PAD(0x4d8, 0x0d4, 1, 0x9f0, 0, NO_PAD_CTRL), + MX35_PAD_NFCLE__IPU_DISPB_PAR_RS = IOMUX_PAD(0x4d8, 0x0d4, 2, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_NFCLE__GPIO2_21 = IOMUX_PAD(0x4d8, 0x0d4, 5, 0x89c, 0, NO_PAD_CTRL), + MX35_PAD_NFCLE__ARM11P_TOP_TRACE_3 = IOMUX_PAD(0x4d8, 0x0d4, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_NFWP_B__EMI_NANDF_WP_B = IOMUX_PAD(0x4dc, 0x0d8, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_NFWP_B__USB_TOP_USBH2_DATA_7 = IOMUX_PAD(0x4dc, 0x0d8, 1, 0x9e8, 0, NO_PAD_CTRL), + MX35_PAD_NFWP_B__IPU_DISPB_WR = IOMUX_PAD(0x4dc, 0x0d8, 2, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_NFWP_B__GPIO2_22 = IOMUX_PAD(0x4dc, 0x0d8, 5, 0x8a0, 0, NO_PAD_CTRL), + MX35_PAD_NFWP_B__ARM11P_TOP_TRCTL = IOMUX_PAD(0x4dc, 0x0d8, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_NFRB__EMI_NANDF_RB = IOMUX_PAD(0x4e0, 0x0dc, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_NFRB__IPU_DISPB_RD = IOMUX_PAD(0x4e0, 0x0dc, 2, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_NFRB__GPIO2_23 = IOMUX_PAD(0x4e0, 0x0dc, 5, 0x8a4, 0, NO_PAD_CTRL), + MX35_PAD_NFRB__ARM11P_TOP_TRCLK = IOMUX_PAD(0x4e0, 0x0dc, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_D15__EMI_EIM_D_15 = IOMUX_PAD(0x4e4, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_D14__EMI_EIM_D_14 = IOMUX_PAD(0x4e8, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_D13__EMI_EIM_D_13 = IOMUX_PAD(0x4ec, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_D12__EMI_EIM_D_12 = IOMUX_PAD(0x4f0, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_D11__EMI_EIM_D_11 = IOMUX_PAD(0x4f4, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_D10__EMI_EIM_D_10 = IOMUX_PAD(0x4f8, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_D9__EMI_EIM_D_9 = IOMUX_PAD(0x4fc, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_D8__EMI_EIM_D_8 = IOMUX_PAD(0x500, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_D7__EMI_EIM_D_7 = IOMUX_PAD(0x504, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_D6__EMI_EIM_D_6 = IOMUX_PAD(0x508, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_D5__EMI_EIM_D_5 = IOMUX_PAD(0x50c, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_D4__EMI_EIM_D_4 = IOMUX_PAD(0x510, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_D3__EMI_EIM_D_3 = IOMUX_PAD(0x514, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_D2__EMI_EIM_D_2 = IOMUX_PAD(0x518, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_D1__EMI_EIM_D_1 = IOMUX_PAD(0x51c, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_D0__EMI_EIM_D_0 = IOMUX_PAD(0x520, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_CSI_D8__IPU_CSI_D_8 = IOMUX_PAD(0x524, 0x0e0, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_CSI_D8__KPP_COL_0 = IOMUX_PAD(0x524, 0x0e0, 1, 0x950, 0, NO_PAD_CTRL), + MX35_PAD_CSI_D8__GPIO1_20 = IOMUX_PAD(0x524, 0x0e0, 5, 0x83c, 1, NO_PAD_CTRL), + MX35_PAD_CSI_D8__ARM11P_TOP_EVNTBUS_13 = IOMUX_PAD(0x524, 0x0e0, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_CSI_D9__IPU_CSI_D_9 = IOMUX_PAD(0x528, 0x0e4, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_CSI_D9__KPP_COL_1 = IOMUX_PAD(0x528, 0x0e4, 1, 0x954, 0, NO_PAD_CTRL), + MX35_PAD_CSI_D9__GPIO1_21 = IOMUX_PAD(0x528, 0x0e4, 5, 0x840, 1, NO_PAD_CTRL), + MX35_PAD_CSI_D9__ARM11P_TOP_EVNTBUS_14 = IOMUX_PAD(0x528, 0x0e4, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_CSI_D10__IPU_CSI_D_10 = IOMUX_PAD(0x52c, 0x0e8, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_CSI_D10__KPP_COL_2 = IOMUX_PAD(0x52c, 0x0e8, 1, 0x958, 0, NO_PAD_CTRL), + MX35_PAD_CSI_D10__GPIO1_22 = IOMUX_PAD(0x52c, 0x0e8, 5, 0x844, 1, NO_PAD_CTRL), + MX35_PAD_CSI_D10__ARM11P_TOP_EVNTBUS_15 = IOMUX_PAD(0x52c, 0x0e8, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_CSI_D11__IPU_CSI_D_11 = IOMUX_PAD(0x530, 0x0ec, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_CSI_D11__KPP_COL_3 = IOMUX_PAD(0x530, 0x0ec, 1, 0x95c, 0, NO_PAD_CTRL), + MX35_PAD_CSI_D11__GPIO1_23 = IOMUX_PAD(0x530, 0x0ec, 5, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_CSI_D12__IPU_CSI_D_12 = IOMUX_PAD(0x534, 0x0f0, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_CSI_D12__KPP_ROW_0 = IOMUX_PAD(0x534, 0x0f0, 1, 0x970, 0, NO_PAD_CTRL), + MX35_PAD_CSI_D12__GPIO1_24 = IOMUX_PAD(0x534, 0x0f0, 5, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_CSI_D13__IPU_CSI_D_13 = IOMUX_PAD(0x538, 0x0f4, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_CSI_D13__KPP_ROW_1 = IOMUX_PAD(0x538, 0x0f4, 1, 0x974, 0, NO_PAD_CTRL), + MX35_PAD_CSI_D13__GPIO1_25 = IOMUX_PAD(0x538, 0x0f4, 5, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_CSI_D14__IPU_CSI_D_14 = IOMUX_PAD(0x53c, 0x0f8, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_CSI_D14__KPP_ROW_2 = IOMUX_PAD(0x53c, 0x0f8, 1, 0x978, 0, NO_PAD_CTRL), + MX35_PAD_CSI_D14__GPIO1_26 = IOMUX_PAD(0x53c, 0x0f8, 5, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_CSI_D15__IPU_CSI_D_15 = IOMUX_PAD(0x540, 0x0fc, 0, 0x97c, 0, NO_PAD_CTRL), + MX35_PAD_CSI_D15__KPP_ROW_3 = IOMUX_PAD(0x540, 0x0fc, 1, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_CSI_D15__GPIO1_27 = IOMUX_PAD(0x540, 0x0fc, 5, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_CSI_MCLK__IPU_CSI_MCLK = IOMUX_PAD(0x544, 0x100, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_CSI_MCLK__GPIO1_28 = IOMUX_PAD(0x544, 0x100, 5, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC = IOMUX_PAD(0x548, 0x104, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_CSI_VSYNC__GPIO1_29 = IOMUX_PAD(0x548, 0x104, 5, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_CSI_HSYNC__IPU_CSI_HSYNC = IOMUX_PAD(0x54c, 0x108, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_CSI_HSYNC__GPIO1_30 = IOMUX_PAD(0x54c, 0x108, 5, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK = IOMUX_PAD(0x550, 0x10c, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_CSI_PIXCLK__GPIO1_31 = IOMUX_PAD(0x550, 0x10c, 5, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_I2C1_CLK__I2C1_SCL = IOMUX_PAD(0x554, 0x110, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_I2C1_CLK__GPIO2_24 = IOMUX_PAD(0x554, 0x110, 5, 0x8a8, 0, NO_PAD_CTRL), + MX35_PAD_I2C1_CLK__CCM_USB_BYP_CLK = IOMUX_PAD(0x554, 0x110, 6, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_I2C1_DAT__I2C1_SDA = IOMUX_PAD(0x558, 0x114, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_I2C1_DAT__GPIO2_25 = IOMUX_PAD(0x558, 0x114, 5, 0x8ac, 0, NO_PAD_CTRL), + + MX35_PAD_I2C2_CLK__I2C2_SCL = IOMUX_PAD(0x55c, 0x118, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_I2C2_CLK__CAN1_TXCAN = IOMUX_PAD(0x55c, 0x118, 1, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR = IOMUX_PAD(0x55c, 0x118, 2, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_I2C2_CLK__GPIO2_26 = IOMUX_PAD(0x55c, 0x118, 5, 0x8b0, 0, NO_PAD_CTRL), + MX35_PAD_I2C2_CLK__SDMA_DEBUG_BUS_DEVICE_2 = IOMUX_PAD(0x55c, 0x118, 6, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_I2C2_DAT__I2C2_SDA = IOMUX_PAD(0x560, 0x11c, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_I2C2_DAT__CAN1_RXCAN = IOMUX_PAD(0x560, 0x11c, 1, 0x7c8, 0, NO_PAD_CTRL), + MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC = IOMUX_PAD(0x560, 0x11c, 2, 0x9f4, 0, NO_PAD_CTRL), + MX35_PAD_I2C2_DAT__GPIO2_27 = IOMUX_PAD(0x560, 0x11c, 5, 0x8b4, 0, NO_PAD_CTRL), + MX35_PAD_I2C2_DAT__SDMA_DEBUG_BUS_DEVICE_3 = IOMUX_PAD(0x560, 0x11c, 6, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_STXD4__AUDMUX_AUD4_TXD = IOMUX_PAD(0x564, 0x120, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_STXD4__GPIO2_28 = IOMUX_PAD(0x564, 0x120, 5, 0x8b8, 0, NO_PAD_CTRL), + MX35_PAD_STXD4__ARM11P_TOP_ARM_COREASID0 = IOMUX_PAD(0x564, 0x120, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SRXD4__AUDMUX_AUD4_RXD = IOMUX_PAD(0x568, 0x124, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_SRXD4__GPIO2_29 = IOMUX_PAD(0x568, 0x124, 5, 0x8bc, 0, NO_PAD_CTRL), + MX35_PAD_SRXD4__ARM11P_TOP_ARM_COREASID1 = IOMUX_PAD(0x568, 0x124, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SCK4__AUDMUX_AUD4_TXC = IOMUX_PAD(0x56c, 0x128, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_SCK4__GPIO2_30 = IOMUX_PAD(0x56c, 0x128, 5, 0x8c4, 0, NO_PAD_CTRL), + MX35_PAD_SCK4__ARM11P_TOP_ARM_COREASID2 = IOMUX_PAD(0x56c, 0x128, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS = IOMUX_PAD(0x570, 0x12c, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_STXFS4__GPIO2_31 = IOMUX_PAD(0x570, 0x12c, 5, 0x8c8, 0, NO_PAD_CTRL), + MX35_PAD_STXFS4__ARM11P_TOP_ARM_COREASID3 = IOMUX_PAD(0x570, 0x12c, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_STXD5__AUDMUX_AUD5_TXD = IOMUX_PAD(0x574, 0x130, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_STXD5__SPDIF_SPDIF_OUT1 = IOMUX_PAD(0x574, 0x130, 1, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_STXD5__CSPI2_MOSI = IOMUX_PAD(0x574, 0x130, 2, 0x7ec, 0, NO_PAD_CTRL), + MX35_PAD_STXD5__GPIO1_0 = IOMUX_PAD(0x574, 0x130, 5, 0x82c, 1, NO_PAD_CTRL), + MX35_PAD_STXD5__ARM11P_TOP_ARM_COREASID4 = IOMUX_PAD(0x574, 0x130, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SRXD5__AUDMUX_AUD5_RXD = IOMUX_PAD(0x578, 0x134, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_SRXD5__SPDIF_SPDIF_IN1 = IOMUX_PAD(0x578, 0x134, 1, 0x998, 0, NO_PAD_CTRL), + MX35_PAD_SRXD5__CSPI2_MISO = IOMUX_PAD(0x578, 0x134, 2, 0x7e8, 0, NO_PAD_CTRL), + MX35_PAD_SRXD5__GPIO1_1 = IOMUX_PAD(0x578, 0x134, 5, 0x838, 1, NO_PAD_CTRL), + MX35_PAD_SRXD5__ARM11P_TOP_ARM_COREASID5 = IOMUX_PAD(0x578, 0x134, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SCK5__AUDMUX_AUD5_TXC = IOMUX_PAD(0x57c, 0x138, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_SCK5__SPDIF_SPDIF_EXTCLK = IOMUX_PAD(0x57c, 0x138, 1, 0x994, 0, NO_PAD_CTRL), + MX35_PAD_SCK5__CSPI2_SCLK = IOMUX_PAD(0x57c, 0x138, 2, 0x7e0, 0, NO_PAD_CTRL), + MX35_PAD_SCK5__GPIO1_2 = IOMUX_PAD(0x57c, 0x138, 5, 0x848, 0, NO_PAD_CTRL), + MX35_PAD_SCK5__ARM11P_TOP_ARM_COREASID6 = IOMUX_PAD(0x57c, 0x138, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_STXFS5__AUDMUX_AUD5_TXFS = IOMUX_PAD(0x580, 0x13c, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_STXFS5__CSPI2_RDY = IOMUX_PAD(0x580, 0x13c, 2, 0x7e4, 0, NO_PAD_CTRL), + MX35_PAD_STXFS5__GPIO1_3 = IOMUX_PAD(0x580, 0x13c, 5, 0x84c, 0, NO_PAD_CTRL), + MX35_PAD_STXFS5__ARM11P_TOP_ARM_COREASID7 = IOMUX_PAD(0x580, 0x13c, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SCKR__ESAI_SCKR = IOMUX_PAD(0x584, 0x140, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_SCKR__GPIO1_4 = IOMUX_PAD(0x584, 0x140, 5, 0x850, 1, NO_PAD_CTRL), + MX35_PAD_SCKR__ARM11P_TOP_EVNTBUS_10 = IOMUX_PAD(0x584, 0x140, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_FSR__ESAI_FSR = IOMUX_PAD(0x588, 0x144, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_FSR__GPIO1_5 = IOMUX_PAD(0x588, 0x144, 5, 0x854, 1, NO_PAD_CTRL), + MX35_PAD_FSR__ARM11P_TOP_EVNTBUS_11 = IOMUX_PAD(0x588, 0x144, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_HCKR__ESAI_HCKR = IOMUX_PAD(0x58c, 0x148, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_HCKR__AUDMUX_AUD5_RXFS = IOMUX_PAD(0x58c, 0x148, 1, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_HCKR__CSPI2_SS0 = IOMUX_PAD(0x58c, 0x148, 2, 0x7f0, 0, NO_PAD_CTRL), + MX35_PAD_HCKR__IPU_FLASH_STROBE = IOMUX_PAD(0x58c, 0x148, 3, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_HCKR__GPIO1_6 = IOMUX_PAD(0x58c, 0x148, 5, 0x858, 1, NO_PAD_CTRL), + MX35_PAD_HCKR__ARM11P_TOP_EVNTBUS_12 = IOMUX_PAD(0x58c, 0x148, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SCKT__ESAI_SCKT = IOMUX_PAD(0x590, 0x14c, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_SCKT__GPIO1_7 = IOMUX_PAD(0x590, 0x14c, 5, 0x85c, 1, NO_PAD_CTRL), + MX35_PAD_SCKT__IPU_CSI_D_0 = IOMUX_PAD(0x590, 0x14c, 6, 0x930, 0, NO_PAD_CTRL), + MX35_PAD_SCKT__KPP_ROW_2 = IOMUX_PAD(0x590, 0x14c, 7, 0x978, 1, NO_PAD_CTRL), + + MX35_PAD_FST__ESAI_FST = IOMUX_PAD(0x594, 0x150, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_FST__GPIO1_8 = IOMUX_PAD(0x594, 0x150, 5, 0x860, 1, NO_PAD_CTRL), + MX35_PAD_FST__IPU_CSI_D_1 = IOMUX_PAD(0x594, 0x150, 6, 0x934, 0, NO_PAD_CTRL), + MX35_PAD_FST__KPP_ROW_3 = IOMUX_PAD(0x594, 0x150, 7, 0x97c, 1, NO_PAD_CTRL), + + MX35_PAD_HCKT__ESAI_HCKT = IOMUX_PAD(0x598, 0x154, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_HCKT__AUDMUX_AUD5_RXC = IOMUX_PAD(0x598, 0x154, 1, 0x7a8, 0, NO_PAD_CTRL), + MX35_PAD_HCKT__GPIO1_9 = IOMUX_PAD(0x598, 0x154, 5, 0x864, 0, NO_PAD_CTRL), + MX35_PAD_HCKT__IPU_CSI_D_2 = IOMUX_PAD(0x598, 0x154, 6, 0x938, 0, NO_PAD_CTRL), + MX35_PAD_HCKT__KPP_COL_3 = IOMUX_PAD(0x598, 0x154, 7, 0x95c, 1, NO_PAD_CTRL), + + MX35_PAD_TX5_RX0__ESAI_TX5_RX0 = IOMUX_PAD(0x59c, 0x158, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_TX5_RX0__AUDMUX_AUD4_RXC = IOMUX_PAD(0x59c, 0x158, 1, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_TX5_RX0__CSPI2_SS2 = IOMUX_PAD(0x59c, 0x158, 2, 0x7f8, 1, NO_PAD_CTRL), + MX35_PAD_TX5_RX0__CAN2_TXCAN = IOMUX_PAD(0x59c, 0x158, 3, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_TX5_RX0__UART2_DTR = IOMUX_PAD(0x59c, 0x158, 4, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_TX5_RX0__GPIO1_10 = IOMUX_PAD(0x59c, 0x158, 5, 0x830, 0, NO_PAD_CTRL), + MX35_PAD_TX5_RX0__EMI_M3IF_CHOSEN_MASTER_0 = IOMUX_PAD(0x59c, 0x158, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_TX4_RX1__ESAI_TX4_RX1 = IOMUX_PAD(0x5a0, 0x15c, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_TX4_RX1__AUDMUX_AUD4_RXFS = IOMUX_PAD(0x5a0, 0x15c, 1, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_TX4_RX1__CSPI2_SS3 = IOMUX_PAD(0x5a0, 0x15c, 2, 0x7fc, 0, NO_PAD_CTRL), + MX35_PAD_TX4_RX1__CAN2_RXCAN = IOMUX_PAD(0x5a0, 0x15c, 3, 0x7cc, 0, NO_PAD_CTRL), + MX35_PAD_TX4_RX1__UART2_DSR = IOMUX_PAD(0x5a0, 0x15c, 4, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_TX4_RX1__GPIO1_11 = IOMUX_PAD(0x5a0, 0x15c, 5, 0x834, 0, NO_PAD_CTRL), + MX35_PAD_TX4_RX1__IPU_CSI_D_3 = IOMUX_PAD(0x5a0, 0x15c, 6, 0x93c, 0, NO_PAD_CTRL), + MX35_PAD_TX4_RX1__KPP_ROW_0 = IOMUX_PAD(0x5a0, 0x15c, 7, 0x970, 1, NO_PAD_CTRL), + + MX35_PAD_TX3_RX2__ESAI_TX3_RX2 = IOMUX_PAD(0x5a4, 0x160, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_TX3_RX2__I2C3_SCL = IOMUX_PAD(0x5a4, 0x160, 1, 0x91c, 0, NO_PAD_CTRL), + MX35_PAD_TX3_RX2__EMI_NANDF_CE1 = IOMUX_PAD(0x5a4, 0x160, 3, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_TX3_RX2__GPIO1_12 = IOMUX_PAD(0x5a4, 0x160, 5, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_TX3_RX2__IPU_CSI_D_4 = IOMUX_PAD(0x5a4, 0x160, 6, 0x940, 0, NO_PAD_CTRL), + MX35_PAD_TX3_RX2__KPP_ROW_1 = IOMUX_PAD(0x5a4, 0x160, 7, 0x974, 1, NO_PAD_CTRL), + + MX35_PAD_TX2_RX3__ESAI_TX2_RX3 = IOMUX_PAD(0x5a8, 0x164, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_TX2_RX3__I2C3_SDA = IOMUX_PAD(0x5a8, 0x164, 1, 0x920, 0, NO_PAD_CTRL), + MX35_PAD_TX2_RX3__EMI_NANDF_CE2 = IOMUX_PAD(0x5a8, 0x164, 3, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_TX2_RX3__GPIO1_13 = IOMUX_PAD(0x5a8, 0x164, 5, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_TX2_RX3__IPU_CSI_D_5 = IOMUX_PAD(0x5a8, 0x164, 6, 0x944, 0, NO_PAD_CTRL), + MX35_PAD_TX2_RX3__KPP_COL_0 = IOMUX_PAD(0x5a8, 0x164, 7, 0x950, 1, NO_PAD_CTRL), + + MX35_PAD_TX1__ESAI_TX1 = IOMUX_PAD(0x5ac, 0x168, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_TX1__CCM_PMIC_RDY = IOMUX_PAD(0x5ac, 0x168, 1, 0x7d4, 1, NO_PAD_CTRL), + MX35_PAD_TX1__CSPI1_SS2 = IOMUX_PAD(0x5ac, 0x168, 2, 0x7d8, 2, NO_PAD_CTRL), + MX35_PAD_TX1__EMI_NANDF_CE3 = IOMUX_PAD(0x5ac, 0x168, 3, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_TX1__UART2_RI = IOMUX_PAD(0x5ac, 0x168, 4, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_TX1__GPIO1_14 = IOMUX_PAD(0x5ac, 0x168, 5, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_TX1__IPU_CSI_D_6 = IOMUX_PAD(0x5ac, 0x168, 6, 0x948, 0, NO_PAD_CTRL), + MX35_PAD_TX1__KPP_COL_1 = IOMUX_PAD(0x5ac, 0x168, 7, 0x954, 1, NO_PAD_CTRL), + + MX35_PAD_TX0__ESAI_TX0 = IOMUX_PAD(0x5b0, 0x16c, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_TX0__SPDIF_SPDIF_EXTCLK = IOMUX_PAD(0x5b0, 0x16c, 1, 0x994, 1, NO_PAD_CTRL), + MX35_PAD_TX0__CSPI1_SS3 = IOMUX_PAD(0x5b0, 0x16c, 2, 0x7dc, 0, NO_PAD_CTRL), + MX35_PAD_TX0__EMI_DTACK_B = IOMUX_PAD(0x5b0, 0x16c, 3, 0x800, 1, NO_PAD_CTRL), + MX35_PAD_TX0__UART2_DCD = IOMUX_PAD(0x5b0, 0x16c, 4, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_TX0__GPIO1_15 = IOMUX_PAD(0x5b0, 0x16c, 5, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_TX0__IPU_CSI_D_7 = IOMUX_PAD(0x5b0, 0x16c, 6, 0x94c, 0, NO_PAD_CTRL), + MX35_PAD_TX0__KPP_COL_2 = IOMUX_PAD(0x5b0, 0x16c, 7, 0x958, 1, NO_PAD_CTRL), + + MX35_PAD_CSPI1_MOSI__CSPI1_MOSI = IOMUX_PAD(0x5b4, 0x170, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_CSPI1_MOSI__GPIO1_16 = IOMUX_PAD(0x5b4, 0x170, 5, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_CSPI1_MOSI__ECT_CTI_TRIG_OUT1_2 = IOMUX_PAD(0x5b4, 0x170, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_CSPI1_MISO__CSPI1_MISO = IOMUX_PAD(0x5b8, 0x174, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_CSPI1_MISO__GPIO1_17 = IOMUX_PAD(0x5b8, 0x174, 5, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_CSPI1_MISO__ECT_CTI_TRIG_OUT1_3 = IOMUX_PAD(0x5b8, 0x174, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_CSPI1_SS0__CSPI1_SS0 = IOMUX_PAD(0x5bc, 0x178, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_CSPI1_SS0__OWIRE_LINE = IOMUX_PAD(0x5bc, 0x178, 1, 0x990, 1, NO_PAD_CTRL), + MX35_PAD_CSPI1_SS0__CSPI2_SS3 = IOMUX_PAD(0x5bc, 0x178, 2, 0x7fc, 1, NO_PAD_CTRL), + MX35_PAD_CSPI1_SS0__GPIO1_18 = IOMUX_PAD(0x5bc, 0x178, 5, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_CSPI1_SS0__ECT_CTI_TRIG_OUT1_4 = IOMUX_PAD(0x5bc, 0x178, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_CSPI1_SS1__CSPI1_SS1 = IOMUX_PAD(0x5c0, 0x17c, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_CSPI1_SS1__PWM_PWMO = IOMUX_PAD(0x5c0, 0x17c, 1, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_CSPI1_SS1__CCM_CLK32K = IOMUX_PAD(0x5c0, 0x17c, 2, 0x7d0, 1, NO_PAD_CTRL), + MX35_PAD_CSPI1_SS1__GPIO1_19 = IOMUX_PAD(0x5c0, 0x17c, 5, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_CSPI1_SS1__IPU_DIAGB_29 = IOMUX_PAD(0x5c0, 0x17c, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_CSPI1_SS1__ECT_CTI_TRIG_OUT1_5 = IOMUX_PAD(0x5c0, 0x17c, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_CSPI1_SCLK__CSPI1_SCLK = IOMUX_PAD(0x5c4, 0x180, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_CSPI1_SCLK__GPIO3_4 = IOMUX_PAD(0x5c4, 0x180, 5, 0x904, 0, NO_PAD_CTRL), + MX35_PAD_CSPI1_SCLK__IPU_DIAGB_30 = IOMUX_PAD(0x5c4, 0x180, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_CSPI1_SCLK__EMI_M3IF_CHOSEN_MASTER_1 = IOMUX_PAD(0x5c4, 0x180, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_CSPI1_SPI_RDY__CSPI1_RDY = IOMUX_PAD(0x5c8, 0x184, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_CSPI1_SPI_RDY__GPIO3_5 = IOMUX_PAD(0x5c8, 0x184, 5, 0x908, 0, NO_PAD_CTRL), + MX35_PAD_CSPI1_SPI_RDY__IPU_DIAGB_31 = IOMUX_PAD(0x5c8, 0x184, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_CSPI1_SPI_RDY__EMI_M3IF_CHOSEN_MASTER_2 = IOMUX_PAD(0x5c8, 0x184, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_RXD1__UART1_RXD_MUX = IOMUX_PAD(0x5cc, 0x188, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_RXD1__CSPI2_MOSI = IOMUX_PAD(0x5cc, 0x188, 1, 0x7ec, 1, NO_PAD_CTRL), + MX35_PAD_RXD1__KPP_COL_4 = IOMUX_PAD(0x5cc, 0x188, 4, 0x960, 0, NO_PAD_CTRL), + MX35_PAD_RXD1__GPIO3_6 = IOMUX_PAD(0x5cc, 0x188, 5, 0x90c, 0, NO_PAD_CTRL), + MX35_PAD_RXD1__ARM11P_TOP_EVNTBUS_16 = IOMUX_PAD(0x5cc, 0x188, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_TXD1__UART1_TXD_MUX = IOMUX_PAD(0x5d0, 0x18c, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_TXD1__CSPI2_MISO = IOMUX_PAD(0x5d0, 0x18c, 1, 0x7e8, 1, NO_PAD_CTRL), + MX35_PAD_TXD1__KPP_COL_5 = IOMUX_PAD(0x5d0, 0x18c, 4, 0x964, 0, NO_PAD_CTRL), + MX35_PAD_TXD1__GPIO3_7 = IOMUX_PAD(0x5d0, 0x18c, 5, 0x910, 0, NO_PAD_CTRL), + MX35_PAD_TXD1__ARM11P_TOP_EVNTBUS_17 = IOMUX_PAD(0x5d0, 0x18c, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_RTS1__UART1_RTS = IOMUX_PAD(0x5d4, 0x190, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_RTS1__CSPI2_SCLK = IOMUX_PAD(0x5d4, 0x190, 1, 0x7e0, 1, NO_PAD_CTRL), + MX35_PAD_RTS1__I2C3_SCL = IOMUX_PAD(0x5d4, 0x190, 2, 0x91c, 1, NO_PAD_CTRL), + MX35_PAD_RTS1__IPU_CSI_D_0 = IOMUX_PAD(0x5d4, 0x190, 3, 0x930, 1, NO_PAD_CTRL), + MX35_PAD_RTS1__KPP_COL_6 = IOMUX_PAD(0x5d4, 0x190, 4, 0x968, 0, NO_PAD_CTRL), + MX35_PAD_RTS1__GPIO3_8 = IOMUX_PAD(0x5d4, 0x190, 5, 0x914, 0, NO_PAD_CTRL), + MX35_PAD_RTS1__EMI_NANDF_CE1 = IOMUX_PAD(0x5d4, 0x190, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_RTS1__ARM11P_TOP_EVNTBUS_18 = IOMUX_PAD(0x5d4, 0x190, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_CTS1__UART1_CTS = IOMUX_PAD(0x5d8, 0x194, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_CTS1__CSPI2_RDY = IOMUX_PAD(0x5d8, 0x194, 1, 0x7e4, 1, NO_PAD_CTRL), + MX35_PAD_CTS1__I2C3_SDA = IOMUX_PAD(0x5d8, 0x194, 2, 0x920, 1, NO_PAD_CTRL), + MX35_PAD_CTS1__IPU_CSI_D_1 = IOMUX_PAD(0x5d8, 0x194, 3, 0x934, 1, NO_PAD_CTRL), + MX35_PAD_CTS1__KPP_COL_7 = IOMUX_PAD(0x5d8, 0x194, 4, 0x96c, 0, NO_PAD_CTRL), + MX35_PAD_CTS1__GPIO3_9 = IOMUX_PAD(0x5d8, 0x194, 5, 0x918, 0, NO_PAD_CTRL), + MX35_PAD_CTS1__EMI_NANDF_CE2 = IOMUX_PAD(0x5d8, 0x194, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_CTS1__ARM11P_TOP_EVNTBUS_19 = IOMUX_PAD(0x5d8, 0x194, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_RXD2__UART2_RXD_MUX = IOMUX_PAD(0x5dc, 0x198, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_RXD2__KPP_ROW_4 = IOMUX_PAD(0x5dc, 0x198, 4, 0x980, 0, NO_PAD_CTRL), + MX35_PAD_RXD2__GPIO3_10 = IOMUX_PAD(0x5dc, 0x198, 5, 0x8ec, 0, NO_PAD_CTRL), + + MX35_PAD_TXD2__UART2_TXD_MUX = IOMUX_PAD(0x5e0, 0x19c, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_TXD2__SPDIF_SPDIF_EXTCLK = IOMUX_PAD(0x5e0, 0x19c, 1, 0x994, 2, NO_PAD_CTRL), + MX35_PAD_TXD2__KPP_ROW_5 = IOMUX_PAD(0x5e0, 0x19c, 4, 0x984, 0, NO_PAD_CTRL), + MX35_PAD_TXD2__GPIO3_11 = IOMUX_PAD(0x5e0, 0x19c, 5, 0x8f0, 0, NO_PAD_CTRL), + + MX35_PAD_RTS2__UART2_RTS = IOMUX_PAD(0x5e4, 0x1a0, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_RTS2__SPDIF_SPDIF_IN1 = IOMUX_PAD(0x5e4, 0x1a0, 1, 0x998, 1, NO_PAD_CTRL), + MX35_PAD_RTS2__CAN2_RXCAN = IOMUX_PAD(0x5e4, 0x1a0, 2, 0x7cc, 1, NO_PAD_CTRL), + MX35_PAD_RTS2__IPU_CSI_D_2 = IOMUX_PAD(0x5e4, 0x1a0, 3, 0x938, 1, NO_PAD_CTRL), + MX35_PAD_RTS2__KPP_ROW_6 = IOMUX_PAD(0x5e4, 0x1a0, 4, 0x988, 0, NO_PAD_CTRL), + MX35_PAD_RTS2__GPIO3_12 = IOMUX_PAD(0x5e4, 0x1a0, 5, 0x8f4, 0, NO_PAD_CTRL), + MX35_PAD_RTS2__AUDMUX_AUD5_RXC = IOMUX_PAD(0x5e4, 0x1a0, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_RTS2__UART3_RXD_MUX = IOMUX_PAD(0x5e4, 0x1a0, 7, 0x9a0, 0, NO_PAD_CTRL), + + MX35_PAD_CTS2__UART2_CTS = IOMUX_PAD(0x5e8, 0x1a4, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_CTS2__SPDIF_SPDIF_OUT1 = IOMUX_PAD(0x5e8, 0x1a4, 1, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_CTS2__CAN2_TXCAN = IOMUX_PAD(0x5e8, 0x1a4, 2, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_CTS2__IPU_CSI_D_3 = IOMUX_PAD(0x5e8, 0x1a4, 3, 0x93c, 1, NO_PAD_CTRL), + MX35_PAD_CTS2__KPP_ROW_7 = IOMUX_PAD(0x5e8, 0x1a4, 4, 0x98c, 0, NO_PAD_CTRL), + MX35_PAD_CTS2__GPIO3_13 = IOMUX_PAD(0x5e8, 0x1a4, 5, 0x8f8, 0, NO_PAD_CTRL), + MX35_PAD_CTS2__AUDMUX_AUD5_RXFS = IOMUX_PAD(0x5e8, 0x1a4, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_CTS2__UART3_TXD_MUX = IOMUX_PAD(0x5e8, 0x1a4, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_RTCK__ARM11P_TOP_RTCK = IOMUX_PAD(0x5ec, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_TCK__SJC_TCK = IOMUX_PAD(0x5f0, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_TMS__SJC_TMS = IOMUX_PAD(0x5f4, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_TDI__SJC_TDI = IOMUX_PAD(0x5f8, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_TDO__SJC_TDO = IOMUX_PAD(0x5fc, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_TRSTB__SJC_TRSTB = IOMUX_PAD(0x600, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_DE_B__SJC_DE_B = IOMUX_PAD(0x604, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SJC_MOD__SJC_MOD = IOMUX_PAD(0x608, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR = IOMUX_PAD(0x60c, 0x1a8, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_USBOTG_PWR__USB_TOP_USBH2_PWR = IOMUX_PAD(0x60c, 0x1a8, 1, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_USBOTG_PWR__GPIO3_14 = IOMUX_PAD(0x60c, 0x1a8, 5, 0x8fc, 0, NO_PAD_CTRL), + + MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC = IOMUX_PAD(0x610, 0x1ac, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_USBOTG_OC__USB_TOP_USBH2_OC = IOMUX_PAD(0x610, 0x1ac, 1, 0x9f4, 1, NO_PAD_CTRL), + MX35_PAD_USBOTG_OC__GPIO3_15 = IOMUX_PAD(0x610, 0x1ac, 5, 0x900, 0, NO_PAD_CTRL), + + MX35_PAD_LD0__IPU_DISPB_DAT_0 = IOMUX_PAD(0x614, 0x1b0, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD0__GPIO2_0 = IOMUX_PAD(0x614, 0x1b0, 5, 0x868, 1, NO_PAD_CTRL), + MX35_PAD_LD0__SDMA_SDMA_DEBUG_PC_0 = IOMUX_PAD(0x614, 0x1b0, 6, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_LD1__IPU_DISPB_DAT_1 = IOMUX_PAD(0x618, 0x1b4, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD1__GPIO2_1 = IOMUX_PAD(0x618, 0x1b4, 5, 0x894, 0, NO_PAD_CTRL), + MX35_PAD_LD1__SDMA_SDMA_DEBUG_PC_1 = IOMUX_PAD(0x618, 0x1b4, 6, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_LD2__IPU_DISPB_DAT_2 = IOMUX_PAD(0x61c, 0x1b8, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD2__GPIO2_2 = IOMUX_PAD(0x61c, 0x1b8, 5, 0x8c0, 0, NO_PAD_CTRL), + MX35_PAD_LD2__SDMA_SDMA_DEBUG_PC_2 = IOMUX_PAD(0x61c, 0x1b8, 6, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_LD3__IPU_DISPB_DAT_3 = IOMUX_PAD(0x620, 0x1bc, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD3__GPIO2_3 = IOMUX_PAD(0x620, 0x1bc, 5, 0x8cc, 0, NO_PAD_CTRL), + MX35_PAD_LD3__SDMA_SDMA_DEBUG_PC_3 = IOMUX_PAD(0x620, 0x1bc, 6, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_LD4__IPU_DISPB_DAT_4 = IOMUX_PAD(0x624, 0x1c0, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD4__GPIO2_4 = IOMUX_PAD(0x624, 0x1c0, 5, 0x8d0, 0, NO_PAD_CTRL), + MX35_PAD_LD4__SDMA_SDMA_DEBUG_PC_4 = IOMUX_PAD(0x624, 0x1c0, 6, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_LD5__IPU_DISPB_DAT_5 = IOMUX_PAD(0x628, 0x1c4, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD5__GPIO2_5 = IOMUX_PAD(0x628, 0x1c4, 5, 0x8d4, 0, NO_PAD_CTRL), + MX35_PAD_LD5__SDMA_SDMA_DEBUG_PC_5 = IOMUX_PAD(0x628, 0x1c4, 6, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_LD6__IPU_DISPB_DAT_6 = IOMUX_PAD(0x62c, 0x1c8, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD6__GPIO2_6 = IOMUX_PAD(0x62c, 0x1c8, 5, 0x8d8, 0, NO_PAD_CTRL), + MX35_PAD_LD6__SDMA_SDMA_DEBUG_PC_6 = IOMUX_PAD(0x62c, 0x1c8, 6, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_LD7__IPU_DISPB_DAT_7 = IOMUX_PAD(0x630, 0x1cc, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD7__GPIO2_7 = IOMUX_PAD(0x630, 0x1cc, 5, 0x8dc, 0, NO_PAD_CTRL), + MX35_PAD_LD7__SDMA_SDMA_DEBUG_PC_7 = IOMUX_PAD(0x630, 0x1cc, 6, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_LD8__IPU_DISPB_DAT_8 = IOMUX_PAD(0x634, 0x1d0, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD8__GPIO2_8 = IOMUX_PAD(0x634, 0x1d0, 5, 0x8e0, 0, NO_PAD_CTRL), + MX35_PAD_LD8__SDMA_SDMA_DEBUG_PC_8 = IOMUX_PAD(0x634, 0x1d0, 6, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_LD9__IPU_DISPB_DAT_9 = IOMUX_PAD(0x638, 0x1d4, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD9__GPIO2_9 = IOMUX_PAD(0x638, 0x1d4, 5, 0x8e4, 0, NO_PAD_CTRL), + MX35_PAD_LD9__SDMA_SDMA_DEBUG_PC_9 = IOMUX_PAD(0x638, 0x1d4, 6, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_LD10__IPU_DISPB_DAT_10 = IOMUX_PAD(0x63c, 0x1d8, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD10__GPIO2_10 = IOMUX_PAD(0x63c, 0x1d8, 5, 0x86c, 0, NO_PAD_CTRL), + MX35_PAD_LD10__SDMA_SDMA_DEBUG_PC_10 = IOMUX_PAD(0x63c, 0x1d8, 6, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_LD11__IPU_DISPB_DAT_11 = IOMUX_PAD(0x640, 0x1dc, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD11__GPIO2_11 = IOMUX_PAD(0x640, 0x1dc, 5, 0x870, 0, NO_PAD_CTRL), + MX35_PAD_LD11__SDMA_SDMA_DEBUG_PC_11 = IOMUX_PAD(0x640, 0x1dc, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD11__ARM11P_TOP_TRACE_4 = IOMUX_PAD(0x640, 0x1dc, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_LD12__IPU_DISPB_DAT_12 = IOMUX_PAD(0x644, 0x1e0, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD12__GPIO2_12 = IOMUX_PAD(0x644, 0x1e0, 5, 0x874, 0, NO_PAD_CTRL), + MX35_PAD_LD12__SDMA_SDMA_DEBUG_PC_12 = IOMUX_PAD(0x644, 0x1e0, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD12__ARM11P_TOP_TRACE_5 = IOMUX_PAD(0x644, 0x1e0, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_LD13__IPU_DISPB_DAT_13 = IOMUX_PAD(0x648, 0x1e4, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD13__GPIO2_13 = IOMUX_PAD(0x648, 0x1e4, 5, 0x878, 0, NO_PAD_CTRL), + MX35_PAD_LD13__SDMA_SDMA_DEBUG_PC_13 = IOMUX_PAD(0x648, 0x1e4, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD13__ARM11P_TOP_TRACE_6 = IOMUX_PAD(0x648, 0x1e4, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_LD14__IPU_DISPB_DAT_14 = IOMUX_PAD(0x64c, 0x1e8, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD14__GPIO2_14 = IOMUX_PAD(0x64c, 0x1e8, 5, 0x87c, 0, NO_PAD_CTRL), + MX35_PAD_LD14__SDMA_SDMA_DEBUG_EVENT_CHANNEL_0 = IOMUX_PAD(0x64c, 0x1e8, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD14__ARM11P_TOP_TRACE_7 = IOMUX_PAD(0x64c, 0x1e8, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_LD15__IPU_DISPB_DAT_15 = IOMUX_PAD(0x650, 0x1ec, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD15__GPIO2_15 = IOMUX_PAD(0x650, 0x1ec, 5, 0x880, 0, NO_PAD_CTRL), + MX35_PAD_LD15__SDMA_SDMA_DEBUG_EVENT_CHANNEL_1 = IOMUX_PAD(0x650, 0x1ec, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD15__ARM11P_TOP_TRACE_8 = IOMUX_PAD(0x650, 0x1ec, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_LD16__IPU_DISPB_DAT_16 = IOMUX_PAD(0x654, 0x1f0, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD16__IPU_DISPB_D12_VSYNC = IOMUX_PAD(0x654, 0x1f0, 2, 0x928, 0, NO_PAD_CTRL), + MX35_PAD_LD16__GPIO2_16 = IOMUX_PAD(0x654, 0x1f0, 5, 0x884, 0, NO_PAD_CTRL), + MX35_PAD_LD16__SDMA_SDMA_DEBUG_EVENT_CHANNEL_2 = IOMUX_PAD(0x654, 0x1f0, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD16__ARM11P_TOP_TRACE_9 = IOMUX_PAD(0x654, 0x1f0, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_LD17__IPU_DISPB_DAT_17 = IOMUX_PAD(0x658, 0x1f4, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD17__IPU_DISPB_CS2 = IOMUX_PAD(0x658, 0x1f4, 2, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD17__GPIO2_17 = IOMUX_PAD(0x658, 0x1f4, 5, 0x888, 0, NO_PAD_CTRL), + MX35_PAD_LD17__SDMA_SDMA_DEBUG_EVENT_CHANNEL_3 = IOMUX_PAD(0x658, 0x1f4, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD17__ARM11P_TOP_TRACE_10 = IOMUX_PAD(0x658, 0x1f4, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_LD18__IPU_DISPB_DAT_18 = IOMUX_PAD(0x65c, 0x1f8, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD18__IPU_DISPB_D0_VSYNC = IOMUX_PAD(0x65c, 0x1f8, 1, 0x924, 1, NO_PAD_CTRL), + MX35_PAD_LD18__IPU_DISPB_D12_VSYNC = IOMUX_PAD(0x65c, 0x1f8, 2, 0x928, 1, NO_PAD_CTRL), + MX35_PAD_LD18__ESDHC3_CMD = IOMUX_PAD(0x65c, 0x1f8, 3, 0x818, 0, NO_PAD_CTRL), + MX35_PAD_LD18__USB_TOP_USBOTG_DATA_3 = IOMUX_PAD(0x65c, 0x1f8, 4, 0x9b0, 0, NO_PAD_CTRL), + MX35_PAD_LD18__GPIO3_24 = IOMUX_PAD(0x65c, 0x1f8, 5, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD18__SDMA_SDMA_DEBUG_EVENT_CHANNEL_4 = IOMUX_PAD(0x65c, 0x1f8, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD18__ARM11P_TOP_TRACE_11 = IOMUX_PAD(0x65c, 0x1f8, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_LD19__IPU_DISPB_DAT_19 = IOMUX_PAD(0x660, 0x1fc, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD19__IPU_DISPB_BCLK = IOMUX_PAD(0x660, 0x1fc, 1, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD19__IPU_DISPB_CS1 = IOMUX_PAD(0x660, 0x1fc, 2, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD19__ESDHC3_CLK = IOMUX_PAD(0x660, 0x1fc, 3, 0x814, 0, NO_PAD_CTRL), + MX35_PAD_LD19__USB_TOP_USBOTG_DIR = IOMUX_PAD(0x660, 0x1fc, 4, 0x9c4, 0, NO_PAD_CTRL), + MX35_PAD_LD19__GPIO3_25 = IOMUX_PAD(0x660, 0x1fc, 5, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD19__SDMA_SDMA_DEBUG_EVENT_CHANNEL_5 = IOMUX_PAD(0x660, 0x1fc, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD19__ARM11P_TOP_TRACE_12 = IOMUX_PAD(0x660, 0x1fc, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_LD20__IPU_DISPB_DAT_20 = IOMUX_PAD(0x664, 0x200, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD20__IPU_DISPB_CS0 = IOMUX_PAD(0x664, 0x200, 1, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD20__IPU_DISPB_SD_CLK = IOMUX_PAD(0x664, 0x200, 2, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD20__ESDHC3_DAT0 = IOMUX_PAD(0x664, 0x200, 3, 0x81c, 0, NO_PAD_CTRL), + MX35_PAD_LD20__GPIO3_26 = IOMUX_PAD(0x664, 0x200, 5, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD20__SDMA_SDMA_DEBUG_CORE_STATUS_3 = IOMUX_PAD(0x664, 0x200, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD20__ARM11P_TOP_TRACE_13 = IOMUX_PAD(0x664, 0x200, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_LD21__IPU_DISPB_DAT_21 = IOMUX_PAD(0x668, 0x204, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD21__IPU_DISPB_PAR_RS = IOMUX_PAD(0x668, 0x204, 1, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD21__IPU_DISPB_SER_RS = IOMUX_PAD(0x668, 0x204, 2, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD21__ESDHC3_DAT1 = IOMUX_PAD(0x668, 0x204, 3, 0x820, 0, NO_PAD_CTRL), + MX35_PAD_LD21__USB_TOP_USBOTG_STP = IOMUX_PAD(0x668, 0x204, 4, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD21__GPIO3_27 = IOMUX_PAD(0x668, 0x204, 5, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD21__SDMA_DEBUG_EVENT_CHANNEL_SEL = IOMUX_PAD(0x668, 0x204, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD21__ARM11P_TOP_TRACE_14 = IOMUX_PAD(0x668, 0x204, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_LD22__IPU_DISPB_DAT_22 = IOMUX_PAD(0x66c, 0x208, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD22__IPU_DISPB_WR = IOMUX_PAD(0x66c, 0x208, 1, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD22__IPU_DISPB_SD_D_I = IOMUX_PAD(0x66c, 0x208, 2, 0x92c, 0, NO_PAD_CTRL), + MX35_PAD_LD22__ESDHC3_DAT2 = IOMUX_PAD(0x66c, 0x208, 3, 0x824, 0, NO_PAD_CTRL), + MX35_PAD_LD22__USB_TOP_USBOTG_NXT = IOMUX_PAD(0x66c, 0x208, 4, 0x9c8, 0, NO_PAD_CTRL), + MX35_PAD_LD22__GPIO3_28 = IOMUX_PAD(0x66c, 0x208, 5, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD22__SDMA_DEBUG_BUS_ERROR = IOMUX_PAD(0x66c, 0x208, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD22__ARM11P_TOP_TRCTL = IOMUX_PAD(0x66c, 0x208, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_LD23__IPU_DISPB_DAT_23 = IOMUX_PAD(0x670, 0x20c, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD23__IPU_DISPB_RD = IOMUX_PAD(0x670, 0x20c, 1, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD23__IPU_DISPB_SD_D_IO = IOMUX_PAD(0x670, 0x20c, 2, 0x92c, 1, NO_PAD_CTRL), + MX35_PAD_LD23__ESDHC3_DAT3 = IOMUX_PAD(0x670, 0x20c, 3, 0x828, 0, NO_PAD_CTRL), + MX35_PAD_LD23__USB_TOP_USBOTG_DATA_7 = IOMUX_PAD(0x670, 0x20c, 4, 0x9c0, 0, NO_PAD_CTRL), + MX35_PAD_LD23__GPIO3_29 = IOMUX_PAD(0x670, 0x20c, 5, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD23__SDMA_DEBUG_MATCHED_DMBUS = IOMUX_PAD(0x670, 0x20c, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_LD23__ARM11P_TOP_TRCLK = IOMUX_PAD(0x670, 0x20c, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC = IOMUX_PAD(0x674, 0x210, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_D3_HSYNC__IPU_DISPB_SD_D_IO = IOMUX_PAD(0x674, 0x210, 2, 0x92c, 2, NO_PAD_CTRL), + MX35_PAD_D3_HSYNC__GPIO3_30 = IOMUX_PAD(0x674, 0x210, 5, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_D3_HSYNC__SDMA_DEBUG_RTBUFFER_WRITE = IOMUX_PAD(0x674, 0x210, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_D3_HSYNC__ARM11P_TOP_TRACE_15 = IOMUX_PAD(0x674, 0x210, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK = IOMUX_PAD(0x678, 0x214, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_D3_FPSHIFT__IPU_DISPB_SD_CLK = IOMUX_PAD(0x678, 0x214, 2, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_D3_FPSHIFT__GPIO3_31 = IOMUX_PAD(0x678, 0x214, 5, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_D3_FPSHIFT__SDMA_SDMA_DEBUG_CORE_STATUS_0 = IOMUX_PAD(0x678, 0x214, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_D3_FPSHIFT__ARM11P_TOP_TRACE_16 = IOMUX_PAD(0x678, 0x214, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY = IOMUX_PAD(0x67c, 0x218, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_D3_DRDY__IPU_DISPB_SD_D_O = IOMUX_PAD(0x67c, 0x218, 2, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_D3_DRDY__GPIO1_0 = IOMUX_PAD(0x67c, 0x218, 5, 0x82c, 2, NO_PAD_CTRL), + MX35_PAD_D3_DRDY__SDMA_SDMA_DEBUG_CORE_STATUS_1 = IOMUX_PAD(0x67c, 0x218, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_D3_DRDY__ARM11P_TOP_TRACE_17 = IOMUX_PAD(0x67c, 0x218, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_CONTRAST__IPU_DISPB_CONTR = IOMUX_PAD(0x680, 0x21c, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_CONTRAST__GPIO1_1 = IOMUX_PAD(0x680, 0x21c, 5, 0x838, 2, NO_PAD_CTRL), + MX35_PAD_CONTRAST__SDMA_SDMA_DEBUG_CORE_STATUS_2 = IOMUX_PAD(0x680, 0x21c, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_CONTRAST__ARM11P_TOP_TRACE_18 = IOMUX_PAD(0x680, 0x21c, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC = IOMUX_PAD(0x684, 0x220, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_D3_VSYNC__IPU_DISPB_CS1 = IOMUX_PAD(0x684, 0x220, 2, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_D3_VSYNC__GPIO1_2 = IOMUX_PAD(0x684, 0x220, 5, 0x848, 1, NO_PAD_CTRL), + MX35_PAD_D3_VSYNC__SDMA_DEBUG_YIELD = IOMUX_PAD(0x684, 0x220, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_D3_VSYNC__ARM11P_TOP_TRACE_19 = IOMUX_PAD(0x684, 0x220, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_D3_REV__IPU_DISPB_D3_REV = IOMUX_PAD(0x688, 0x224, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_D3_REV__IPU_DISPB_SER_RS = IOMUX_PAD(0x688, 0x224, 2, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_D3_REV__GPIO1_3 = IOMUX_PAD(0x688, 0x224, 5, 0x84c, 1, NO_PAD_CTRL), + MX35_PAD_D3_REV__SDMA_DEBUG_BUS_RWB = IOMUX_PAD(0x688, 0x224, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_D3_REV__ARM11P_TOP_TRACE_20 = IOMUX_PAD(0x688, 0x224, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS = IOMUX_PAD(0x68c, 0x228, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_D3_CLS__IPU_DISPB_CS2 = IOMUX_PAD(0x68c, 0x228, 2, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_D3_CLS__GPIO1_4 = IOMUX_PAD(0x68c, 0x228, 5, 0x850, 2, NO_PAD_CTRL), + MX35_PAD_D3_CLS__SDMA_DEBUG_BUS_DEVICE_0 = IOMUX_PAD(0x68c, 0x228, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_D3_CLS__ARM11P_TOP_TRACE_21 = IOMUX_PAD(0x68c, 0x228, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL = IOMUX_PAD(0x690, 0x22c, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_D3_SPL__IPU_DISPB_D12_VSYNC = IOMUX_PAD(0x690, 0x22c, 2, 0x928, 2, NO_PAD_CTRL), + MX35_PAD_D3_SPL__GPIO1_5 = IOMUX_PAD(0x690, 0x22c, 5, 0x854, 2, NO_PAD_CTRL), + MX35_PAD_D3_SPL__SDMA_DEBUG_BUS_DEVICE_1 = IOMUX_PAD(0x690, 0x22c, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_D3_SPL__ARM11P_TOP_TRACE_22 = IOMUX_PAD(0x690, 0x22c, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SD1_CMD__ESDHC1_CMD = IOMUX_PAD(0x694, 0x230, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_SD1_CMD__MSHC_SCLK = IOMUX_PAD(0x694, 0x230, 1, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_SD1_CMD__IPU_DISPB_D0_VSYNC = IOMUX_PAD(0x694, 0x230, 3, 0x924, 2, NO_PAD_CTRL), + MX35_PAD_SD1_CMD__USB_TOP_USBOTG_DATA_4 = IOMUX_PAD(0x694, 0x230, 4, 0x9b4, 0, NO_PAD_CTRL), + MX35_PAD_SD1_CMD__GPIO1_6 = IOMUX_PAD(0x694, 0x230, 5, 0x858, 2, NO_PAD_CTRL), + MX35_PAD_SD1_CMD__ARM11P_TOP_TRCTL = IOMUX_PAD(0x694, 0x230, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SD1_CLK__ESDHC1_CLK = IOMUX_PAD(0x698, 0x234, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_SD1_CLK__MSHC_BS = IOMUX_PAD(0x698, 0x234, 1, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_SD1_CLK__IPU_DISPB_BCLK = IOMUX_PAD(0x698, 0x234, 3, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_SD1_CLK__USB_TOP_USBOTG_DATA_5 = IOMUX_PAD(0x698, 0x234, 4, 0x9b8, 0, NO_PAD_CTRL), + MX35_PAD_SD1_CLK__GPIO1_7 = IOMUX_PAD(0x698, 0x234, 5, 0x85c, 2, NO_PAD_CTRL), + MX35_PAD_SD1_CLK__ARM11P_TOP_TRCLK = IOMUX_PAD(0x698, 0x234, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SD1_DATA0__ESDHC1_DAT0 = IOMUX_PAD(0x69c, 0x238, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_SD1_DATA0__MSHC_DATA_0 = IOMUX_PAD(0x69c, 0x238, 1, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_SD1_DATA0__IPU_DISPB_CS0 = IOMUX_PAD(0x69c, 0x238, 3, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_SD1_DATA0__USB_TOP_USBOTG_DATA_6 = IOMUX_PAD(0x69c, 0x238, 4, 0x9bc, 0, NO_PAD_CTRL), + MX35_PAD_SD1_DATA0__GPIO1_8 = IOMUX_PAD(0x69c, 0x238, 5, 0x860, 2, NO_PAD_CTRL), + MX35_PAD_SD1_DATA0__ARM11P_TOP_TRACE_23 = IOMUX_PAD(0x69c, 0x238, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SD1_DATA1__ESDHC1_DAT1 = IOMUX_PAD(0x6a0, 0x23c, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_SD1_DATA1__MSHC_DATA_1 = IOMUX_PAD(0x6a0, 0x23c, 1, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_SD1_DATA1__IPU_DISPB_PAR_RS = IOMUX_PAD(0x6a0, 0x23c, 3, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_SD1_DATA1__USB_TOP_USBOTG_DATA_0 = IOMUX_PAD(0x6a0, 0x23c, 4, 0x9a4, 0, NO_PAD_CTRL), + MX35_PAD_SD1_DATA1__GPIO1_9 = IOMUX_PAD(0x6a0, 0x23c, 5, 0x864, 1, NO_PAD_CTRL), + MX35_PAD_SD1_DATA1__ARM11P_TOP_TRACE_24 = IOMUX_PAD(0x6a0, 0x23c, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SD1_DATA2__ESDHC1_DAT2 = IOMUX_PAD(0x6a4, 0x240, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_SD1_DATA2__MSHC_DATA_2 = IOMUX_PAD(0x6a4, 0x240, 1, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_SD1_DATA2__IPU_DISPB_WR = IOMUX_PAD(0x6a4, 0x240, 3, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_SD1_DATA2__USB_TOP_USBOTG_DATA_1 = IOMUX_PAD(0x6a4, 0x240, 4, 0x9a8, 0, NO_PAD_CTRL), + MX35_PAD_SD1_DATA2__GPIO1_10 = IOMUX_PAD(0x6a4, 0x240, 5, 0x830, 1, NO_PAD_CTRL), + MX35_PAD_SD1_DATA2__ARM11P_TOP_TRACE_25 = IOMUX_PAD(0x6a4, 0x240, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SD1_DATA3__ESDHC1_DAT3 = IOMUX_PAD(0x6a8, 0x244, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_SD1_DATA3__MSHC_DATA_3 = IOMUX_PAD(0x6a8, 0x244, 1, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_SD1_DATA3__IPU_DISPB_RD = IOMUX_PAD(0x6a8, 0x244, 3, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_SD1_DATA3__USB_TOP_USBOTG_DATA_2 = IOMUX_PAD(0x6a8, 0x244, 4, 0x9ac, 0, NO_PAD_CTRL), + MX35_PAD_SD1_DATA3__GPIO1_11 = IOMUX_PAD(0x6a8, 0x244, 5, 0x834, 1, NO_PAD_CTRL), + MX35_PAD_SD1_DATA3__ARM11P_TOP_TRACE_26 = IOMUX_PAD(0x6a8, 0x244, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SD2_CMD__ESDHC2_CMD = IOMUX_PAD(0x6ac, 0x248, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_SD2_CMD__I2C3_SCL = IOMUX_PAD(0x6ac, 0x248, 1, 0x91c, 2, NO_PAD_CTRL), + MX35_PAD_SD2_CMD__ESDHC1_DAT4 = IOMUX_PAD(0x6ac, 0x248, 2, 0x804, 0, NO_PAD_CTRL), + MX35_PAD_SD2_CMD__IPU_CSI_D_2 = IOMUX_PAD(0x6ac, 0x248, 3, 0x938, 2, NO_PAD_CTRL), + MX35_PAD_SD2_CMD__USB_TOP_USBH2_DATA_4 = IOMUX_PAD(0x6ac, 0x248, 4, 0x9dc, 0, NO_PAD_CTRL), + MX35_PAD_SD2_CMD__GPIO2_0 = IOMUX_PAD(0x6ac, 0x248, 5, 0x868, 2, NO_PAD_CTRL), + MX35_PAD_SD2_CMD__SPDIF_SPDIF_OUT1 = IOMUX_PAD(0x6ac, 0x248, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_SD2_CMD__IPU_DISPB_D12_VSYNC = IOMUX_PAD(0x6ac, 0x248, 7, 0x928, 3, NO_PAD_CTRL), + + MX35_PAD_SD2_CLK__ESDHC2_CLK = IOMUX_PAD(0x6b0, 0x24c, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_SD2_CLK__I2C3_SDA = IOMUX_PAD(0x6b0, 0x24c, 1, 0x920, 2, NO_PAD_CTRL), + MX35_PAD_SD2_CLK__ESDHC1_DAT5 = IOMUX_PAD(0x6b0, 0x24c, 2, 0x808, 0, NO_PAD_CTRL), + MX35_PAD_SD2_CLK__IPU_CSI_D_3 = IOMUX_PAD(0x6b0, 0x24c, 3, 0x93c, 2, NO_PAD_CTRL), + MX35_PAD_SD2_CLK__USB_TOP_USBH2_DATA_5 = IOMUX_PAD(0x6b0, 0x24c, 4, 0x9e0, 0, NO_PAD_CTRL), + MX35_PAD_SD2_CLK__GPIO2_1 = IOMUX_PAD(0x6b0, 0x24c, 5, 0x894, 1, NO_PAD_CTRL), + MX35_PAD_SD2_CLK__SPDIF_SPDIF_IN1 = IOMUX_PAD(0x6b0, 0x24c, 6, 0x998, 2, NO_PAD_CTRL), + MX35_PAD_SD2_CLK__IPU_DISPB_CS2 = IOMUX_PAD(0x6b0, 0x24c, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_SD2_DATA0__ESDHC2_DAT0 = IOMUX_PAD(0x6b4, 0x250, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_SD2_DATA0__UART3_RXD_MUX = IOMUX_PAD(0x6b4, 0x250, 1, 0x9a0, 1, NO_PAD_CTRL), + MX35_PAD_SD2_DATA0__ESDHC1_DAT6 = IOMUX_PAD(0x6b4, 0x250, 2, 0x80c, 0, NO_PAD_CTRL), + MX35_PAD_SD2_DATA0__IPU_CSI_D_4 = IOMUX_PAD(0x6b4, 0x250, 3, 0x940, 1, NO_PAD_CTRL), + MX35_PAD_SD2_DATA0__USB_TOP_USBH2_DATA_6 = IOMUX_PAD(0x6b4, 0x250, 4, 0x9e4, 0, NO_PAD_CTRL), + MX35_PAD_SD2_DATA0__GPIO2_2 = IOMUX_PAD(0x6b4, 0x250, 5, 0x8c0, 1, NO_PAD_CTRL), + MX35_PAD_SD2_DATA0__SPDIF_SPDIF_EXTCLK = IOMUX_PAD(0x6b4, 0x250, 6, 0x994, 3, NO_PAD_CTRL), + + MX35_PAD_SD2_DATA1__ESDHC2_DAT1 = IOMUX_PAD(0x6b8, 0x254, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_SD2_DATA1__UART3_TXD_MUX = IOMUX_PAD(0x6b8, 0x254, 1, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_SD2_DATA1__ESDHC1_DAT7 = IOMUX_PAD(0x6b8, 0x254, 2, 0x810, 0, NO_PAD_CTRL), + MX35_PAD_SD2_DATA1__IPU_CSI_D_5 = IOMUX_PAD(0x6b8, 0x254, 3, 0x944, 1, NO_PAD_CTRL), + MX35_PAD_SD2_DATA1__USB_TOP_USBH2_DATA_0 = IOMUX_PAD(0x6b8, 0x254, 4, 0x9cc, 0, NO_PAD_CTRL), + MX35_PAD_SD2_DATA1__GPIO2_3 = IOMUX_PAD(0x6b8, 0x254, 5, 0x8cc, 1, NO_PAD_CTRL), + + MX35_PAD_SD2_DATA2__ESDHC2_DAT2 = IOMUX_PAD(0x6bc, 0x258, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_SD2_DATA2__UART3_RTS = IOMUX_PAD(0x6bc, 0x258, 1, 0x99c, 0, NO_PAD_CTRL), + MX35_PAD_SD2_DATA2__CAN1_RXCAN = IOMUX_PAD(0x6bc, 0x258, 2, 0x7c8, 1, NO_PAD_CTRL), + MX35_PAD_SD2_DATA2__IPU_CSI_D_6 = IOMUX_PAD(0x6bc, 0x258, 3, 0x948, 1, NO_PAD_CTRL), + MX35_PAD_SD2_DATA2__USB_TOP_USBH2_DATA_1 = IOMUX_PAD(0x6bc, 0x258, 4, 0x9d0, 0, NO_PAD_CTRL), + MX35_PAD_SD2_DATA2__GPIO2_4 = IOMUX_PAD(0x6bc, 0x258, 5, 0x8d0, 1, NO_PAD_CTRL), + + MX35_PAD_SD2_DATA3__ESDHC2_DAT3 = IOMUX_PAD(0x6c0, 0x25c, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_SD2_DATA3__UART3_CTS = IOMUX_PAD(0x6c0, 0x25c, 1, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_SD2_DATA3__CAN1_TXCAN = IOMUX_PAD(0x6c0, 0x25c, 2, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_SD2_DATA3__IPU_CSI_D_7 = IOMUX_PAD(0x6c0, 0x25c, 3, 0x94c, 1, NO_PAD_CTRL), + MX35_PAD_SD2_DATA3__USB_TOP_USBH2_DATA_2 = IOMUX_PAD(0x6c0, 0x25c, 4, 0x9d4, 0, NO_PAD_CTRL), + MX35_PAD_SD2_DATA3__GPIO2_5 = IOMUX_PAD(0x6c0, 0x25c, 5, 0x8d4, 1, NO_PAD_CTRL), + + MX35_PAD_ATA_CS0__ATA_CS0 = IOMUX_PAD(0x6c4, 0x260, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_CS0__CSPI1_SS3 = IOMUX_PAD(0x6c4, 0x260, 1, 0x7dc, 1, NO_PAD_CTRL), + MX35_PAD_ATA_CS0__IPU_DISPB_CS1 = IOMUX_PAD(0x6c4, 0x260, 3, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_CS0__GPIO2_6 = IOMUX_PAD(0x6c4, 0x260, 5, 0x8d8, 1, NO_PAD_CTRL), + MX35_PAD_ATA_CS0__IPU_DIAGB_0 = IOMUX_PAD(0x6c4, 0x260, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_CS0__ARM11P_TOP_MAX1_HMASTER_0 = IOMUX_PAD(0x6c4, 0x260, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_ATA_CS1__ATA_CS1 = IOMUX_PAD(0x6c8, 0x264, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_CS1__IPU_DISPB_CS2 = IOMUX_PAD(0x6c8, 0x264, 3, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_CS1__CSPI2_SS0 = IOMUX_PAD(0x6c8, 0x264, 4, 0x7f0, 1, NO_PAD_CTRL), + MX35_PAD_ATA_CS1__GPIO2_7 = IOMUX_PAD(0x6c8, 0x264, 5, 0x8dc, 1, NO_PAD_CTRL), + MX35_PAD_ATA_CS1__IPU_DIAGB_1 = IOMUX_PAD(0x6c8, 0x264, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_CS1__ARM11P_TOP_MAX1_HMASTER_1 = IOMUX_PAD(0x6c8, 0x264, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_ATA_DIOR__ATA_DIOR = IOMUX_PAD(0x6cc, 0x268, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DIOR__ESDHC3_DAT0 = IOMUX_PAD(0x6cc, 0x268, 1, 0x81c, 1, NO_PAD_CTRL), + MX35_PAD_ATA_DIOR__USB_TOP_USBOTG_DIR = IOMUX_PAD(0x6cc, 0x268, 2, 0x9c4, 1, NO_PAD_CTRL), + MX35_PAD_ATA_DIOR__IPU_DISPB_BE0 = IOMUX_PAD(0x6cc, 0x268, 3, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DIOR__CSPI2_SS1 = IOMUX_PAD(0x6cc, 0x268, 4, 0x7f4, 1, NO_PAD_CTRL), + MX35_PAD_ATA_DIOR__GPIO2_8 = IOMUX_PAD(0x6cc, 0x268, 5, 0x8e0, 1, NO_PAD_CTRL), + MX35_PAD_ATA_DIOR__IPU_DIAGB_2 = IOMUX_PAD(0x6cc, 0x268, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DIOR__ARM11P_TOP_MAX1_HMASTER_2 = IOMUX_PAD(0x6cc, 0x268, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_ATA_DIOW__ATA_DIOW = IOMUX_PAD(0x6d0, 0x26c, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DIOW__ESDHC3_DAT1 = IOMUX_PAD(0x6d0, 0x26c, 1, 0x820, 1, NO_PAD_CTRL), + MX35_PAD_ATA_DIOW__USB_TOP_USBOTG_STP = IOMUX_PAD(0x6d0, 0x26c, 2, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DIOW__IPU_DISPB_BE1 = IOMUX_PAD(0x6d0, 0x26c, 3, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DIOW__CSPI2_MOSI = IOMUX_PAD(0x6d0, 0x26c, 4, 0x7ec, 2, NO_PAD_CTRL), + MX35_PAD_ATA_DIOW__GPIO2_9 = IOMUX_PAD(0x6d0, 0x26c, 5, 0x8e4, 1, NO_PAD_CTRL), + MX35_PAD_ATA_DIOW__IPU_DIAGB_3 = IOMUX_PAD(0x6d0, 0x26c, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DIOW__ARM11P_TOP_MAX1_HMASTER_3 = IOMUX_PAD(0x6d0, 0x26c, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_ATA_DMACK__ATA_DMACK = IOMUX_PAD(0x6d4, 0x270, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DMACK__ESDHC3_DAT2 = IOMUX_PAD(0x6d4, 0x270, 1, 0x824, 1, NO_PAD_CTRL), + MX35_PAD_ATA_DMACK__USB_TOP_USBOTG_NXT = IOMUX_PAD(0x6d4, 0x270, 2, 0x9c8, 1, NO_PAD_CTRL), + MX35_PAD_ATA_DMACK__CSPI2_MISO = IOMUX_PAD(0x6d4, 0x270, 4, 0x7e8, 2, NO_PAD_CTRL), + MX35_PAD_ATA_DMACK__GPIO2_10 = IOMUX_PAD(0x6d4, 0x270, 5, 0x86c, 1, NO_PAD_CTRL), + MX35_PAD_ATA_DMACK__IPU_DIAGB_4 = IOMUX_PAD(0x6d4, 0x270, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DMACK__ARM11P_TOP_MAX0_HMASTER_0 = IOMUX_PAD(0x6d4, 0x270, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_ATA_RESET_B__ATA_RESET_B = IOMUX_PAD(0x6d8, 0x274, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_RESET_B__ESDHC3_DAT3 = IOMUX_PAD(0x6d8, 0x274, 1, 0x828, 1, NO_PAD_CTRL), + MX35_PAD_ATA_RESET_B__USB_TOP_USBOTG_DATA_0 = IOMUX_PAD(0x6d8, 0x274, 2, 0x9a4, 1, NO_PAD_CTRL), + MX35_PAD_ATA_RESET_B__IPU_DISPB_SD_D_O = IOMUX_PAD(0x6d8, 0x274, 3, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_RESET_B__CSPI2_RDY = IOMUX_PAD(0x6d8, 0x274, 4, 0x7e4, 2, NO_PAD_CTRL), + MX35_PAD_ATA_RESET_B__GPIO2_11 = IOMUX_PAD(0x6d8, 0x274, 5, 0x870, 1, NO_PAD_CTRL), + MX35_PAD_ATA_RESET_B__IPU_DIAGB_5 = IOMUX_PAD(0x6d8, 0x274, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_RESET_B__ARM11P_TOP_MAX0_HMASTER_1 = IOMUX_PAD(0x6d8, 0x274, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_ATA_IORDY__ATA_IORDY = IOMUX_PAD(0x6dc, 0x278, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_IORDY__ESDHC3_DAT4 = IOMUX_PAD(0x6dc, 0x278, 1, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_IORDY__USB_TOP_USBOTG_DATA_1 = IOMUX_PAD(0x6dc, 0x278, 2, 0x9a8, 1, NO_PAD_CTRL), + MX35_PAD_ATA_IORDY__IPU_DISPB_SD_D_IO = IOMUX_PAD(0x6dc, 0x278, 3, 0x92c, 3, NO_PAD_CTRL), + MX35_PAD_ATA_IORDY__ESDHC2_DAT4 = IOMUX_PAD(0x6dc, 0x278, 4, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_IORDY__GPIO2_12 = IOMUX_PAD(0x6dc, 0x278, 5, 0x874, 1, NO_PAD_CTRL), + MX35_PAD_ATA_IORDY__IPU_DIAGB_6 = IOMUX_PAD(0x6dc, 0x278, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_IORDY__ARM11P_TOP_MAX0_HMASTER_2 = IOMUX_PAD(0x6dc, 0x278, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_ATA_DATA0__ATA_DATA_0 = IOMUX_PAD(0x6e0, 0x27c, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DATA0__ESDHC3_DAT5 = IOMUX_PAD(0x6e0, 0x27c, 1, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DATA0__USB_TOP_USBOTG_DATA_2 = IOMUX_PAD(0x6e0, 0x27c, 2, 0x9ac, 1, NO_PAD_CTRL), + MX35_PAD_ATA_DATA0__IPU_DISPB_D12_VSYNC = IOMUX_PAD(0x6e0, 0x27c, 3, 0x928, 4, NO_PAD_CTRL), + MX35_PAD_ATA_DATA0__ESDHC2_DAT5 = IOMUX_PAD(0x6e0, 0x27c, 4, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DATA0__GPIO2_13 = IOMUX_PAD(0x6e0, 0x27c, 5, 0x878, 1, NO_PAD_CTRL), + MX35_PAD_ATA_DATA0__IPU_DIAGB_7 = IOMUX_PAD(0x6e0, 0x27c, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DATA0__ARM11P_TOP_MAX0_HMASTER_3 = IOMUX_PAD(0x6e0, 0x27c, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_ATA_DATA1__ATA_DATA_1 = IOMUX_PAD(0x6e4, 0x280, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DATA1__ESDHC3_DAT6 = IOMUX_PAD(0x6e4, 0x280, 1, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DATA1__USB_TOP_USBOTG_DATA_3 = IOMUX_PAD(0x6e4, 0x280, 2, 0x9b0, 1, NO_PAD_CTRL), + MX35_PAD_ATA_DATA1__IPU_DISPB_SD_CLK = IOMUX_PAD(0x6e4, 0x280, 3, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DATA1__ESDHC2_DAT6 = IOMUX_PAD(0x6e4, 0x280, 4, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DATA1__GPIO2_14 = IOMUX_PAD(0x6e4, 0x280, 5, 0x87c, 1, NO_PAD_CTRL), + MX35_PAD_ATA_DATA1__IPU_DIAGB_8 = IOMUX_PAD(0x6e4, 0x280, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DATA1__ARM11P_TOP_TRACE_27 = IOMUX_PAD(0x6e4, 0x280, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_ATA_DATA2__ATA_DATA_2 = IOMUX_PAD(0x6e8, 0x284, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DATA2__ESDHC3_DAT7 = IOMUX_PAD(0x6e8, 0x284, 1, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DATA2__USB_TOP_USBOTG_DATA_4 = IOMUX_PAD(0x6e8, 0x284, 2, 0x9b4, 1, NO_PAD_CTRL), + MX35_PAD_ATA_DATA2__IPU_DISPB_SER_RS = IOMUX_PAD(0x6e8, 0x284, 3, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DATA2__ESDHC2_DAT7 = IOMUX_PAD(0x6e8, 0x284, 4, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DATA2__GPIO2_15 = IOMUX_PAD(0x6e8, 0x284, 5, 0x880, 1, NO_PAD_CTRL), + MX35_PAD_ATA_DATA2__IPU_DIAGB_9 = IOMUX_PAD(0x6e8, 0x284, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DATA2__ARM11P_TOP_TRACE_28 = IOMUX_PAD(0x6e8, 0x284, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_ATA_DATA3__ATA_DATA_3 = IOMUX_PAD(0x6ec, 0x288, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DATA3__ESDHC3_CLK = IOMUX_PAD(0x6ec, 0x288, 1, 0x814, 1, NO_PAD_CTRL), + MX35_PAD_ATA_DATA3__USB_TOP_USBOTG_DATA_5 = IOMUX_PAD(0x6ec, 0x288, 2, 0x9b8, 1, NO_PAD_CTRL), + MX35_PAD_ATA_DATA3__CSPI2_SCLK = IOMUX_PAD(0x6ec, 0x288, 4, 0x7e0, 2, NO_PAD_CTRL), + MX35_PAD_ATA_DATA3__GPIO2_16 = IOMUX_PAD(0x6ec, 0x288, 5, 0x884, 1, NO_PAD_CTRL), + MX35_PAD_ATA_DATA3__IPU_DIAGB_10 = IOMUX_PAD(0x6ec, 0x288, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DATA3__ARM11P_TOP_TRACE_29 = IOMUX_PAD(0x6ec, 0x288, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_ATA_DATA4__ATA_DATA_4 = IOMUX_PAD(0x6f0, 0x28c, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DATA4__ESDHC3_CMD = IOMUX_PAD(0x6f0, 0x28c, 1, 0x818, 1, NO_PAD_CTRL), + MX35_PAD_ATA_DATA4__USB_TOP_USBOTG_DATA_6 = IOMUX_PAD(0x6f0, 0x28c, 2, 0x9bc, 1, NO_PAD_CTRL), + MX35_PAD_ATA_DATA4__GPIO2_17 = IOMUX_PAD(0x6f0, 0x28c, 5, 0x888, 1, NO_PAD_CTRL), + MX35_PAD_ATA_DATA4__IPU_DIAGB_11 = IOMUX_PAD(0x6f0, 0x28c, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DATA4__ARM11P_TOP_TRACE_30 = IOMUX_PAD(0x6f0, 0x28c, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_ATA_DATA5__ATA_DATA_5 = IOMUX_PAD(0x6f4, 0x290, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DATA5__USB_TOP_USBOTG_DATA_7 = IOMUX_PAD(0x6f4, 0x290, 2, 0x9c0, 1, NO_PAD_CTRL), + MX35_PAD_ATA_DATA5__GPIO2_18 = IOMUX_PAD(0x6f4, 0x290, 5, 0x88c, 1, NO_PAD_CTRL), + MX35_PAD_ATA_DATA5__IPU_DIAGB_12 = IOMUX_PAD(0x6f4, 0x290, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DATA5__ARM11P_TOP_TRACE_31 = IOMUX_PAD(0x6f4, 0x290, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_ATA_DATA6__ATA_DATA_6 = IOMUX_PAD(0x6f8, 0x294, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DATA6__CAN1_TXCAN = IOMUX_PAD(0x6f8, 0x294, 1, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DATA6__UART1_DTR = IOMUX_PAD(0x6f8, 0x294, 2, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DATA6__AUDMUX_AUD6_TXD = IOMUX_PAD(0x6f8, 0x294, 3, 0x7b4, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DATA6__GPIO2_19 = IOMUX_PAD(0x6f8, 0x294, 5, 0x890, 1, NO_PAD_CTRL), + MX35_PAD_ATA_DATA6__IPU_DIAGB_13 = IOMUX_PAD(0x6f8, 0x294, 6, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_ATA_DATA7__ATA_DATA_7 = IOMUX_PAD(0x6fc, 0x298, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DATA7__CAN1_RXCAN = IOMUX_PAD(0x6fc, 0x298, 1, 0x7c8, 2, NO_PAD_CTRL), + MX35_PAD_ATA_DATA7__UART1_DSR = IOMUX_PAD(0x6fc, 0x298, 2, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DATA7__AUDMUX_AUD6_RXD = IOMUX_PAD(0x6fc, 0x298, 3, 0x7b0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DATA7__GPIO2_20 = IOMUX_PAD(0x6fc, 0x298, 5, 0x898, 1, NO_PAD_CTRL), + MX35_PAD_ATA_DATA7__IPU_DIAGB_14 = IOMUX_PAD(0x6fc, 0x298, 6, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_ATA_DATA8__ATA_DATA_8 = IOMUX_PAD(0x700, 0x29c, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DATA8__UART3_RTS = IOMUX_PAD(0x700, 0x29c, 1, 0x99c, 1, NO_PAD_CTRL), + MX35_PAD_ATA_DATA8__UART1_RI = IOMUX_PAD(0x700, 0x29c, 2, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DATA8__AUDMUX_AUD6_TXC = IOMUX_PAD(0x700, 0x29c, 3, 0x7c0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DATA8__GPIO2_21 = IOMUX_PAD(0x700, 0x29c, 5, 0x89c, 1, NO_PAD_CTRL), + MX35_PAD_ATA_DATA8__IPU_DIAGB_15 = IOMUX_PAD(0x700, 0x29c, 6, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_ATA_DATA9__ATA_DATA_9 = IOMUX_PAD(0x704, 0x2a0, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DATA9__UART3_CTS = IOMUX_PAD(0x704, 0x2a0, 1, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DATA9__UART1_DCD = IOMUX_PAD(0x704, 0x2a0, 2, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DATA9__AUDMUX_AUD6_TXFS = IOMUX_PAD(0x704, 0x2a0, 3, 0x7c4, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DATA9__GPIO2_22 = IOMUX_PAD(0x704, 0x2a0, 5, 0x8a0, 1, NO_PAD_CTRL), + MX35_PAD_ATA_DATA9__IPU_DIAGB_16 = IOMUX_PAD(0x704, 0x2a0, 6, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_ATA_DATA10__ATA_DATA_10 = IOMUX_PAD(0x708, 0x2a4, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DATA10__UART3_RXD_MUX = IOMUX_PAD(0x708, 0x2a4, 1, 0x9a0, 2, NO_PAD_CTRL), + MX35_PAD_ATA_DATA10__AUDMUX_AUD6_RXC = IOMUX_PAD(0x708, 0x2a4, 3, 0x7b8, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DATA10__GPIO2_23 = IOMUX_PAD(0x708, 0x2a4, 5, 0x8a4, 1, NO_PAD_CTRL), + MX35_PAD_ATA_DATA10__IPU_DIAGB_17 = IOMUX_PAD(0x708, 0x2a4, 6, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_ATA_DATA11__ATA_DATA_11 = IOMUX_PAD(0x70c, 0x2a8, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DATA11__UART3_TXD_MUX = IOMUX_PAD(0x70c, 0x2a8, 1, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DATA11__AUDMUX_AUD6_RXFS = IOMUX_PAD(0x70c, 0x2a8, 3, 0x7bc, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DATA11__GPIO2_24 = IOMUX_PAD(0x70c, 0x2a8, 5, 0x8a8, 1, NO_PAD_CTRL), + MX35_PAD_ATA_DATA11__IPU_DIAGB_18 = IOMUX_PAD(0x70c, 0x2a8, 6, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_ATA_DATA12__ATA_DATA_12 = IOMUX_PAD(0x710, 0x2ac, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DATA12__I2C3_SCL = IOMUX_PAD(0x710, 0x2ac, 1, 0x91c, 3, NO_PAD_CTRL), + MX35_PAD_ATA_DATA12__GPIO2_25 = IOMUX_PAD(0x710, 0x2ac, 5, 0x8ac, 1, NO_PAD_CTRL), + MX35_PAD_ATA_DATA12__IPU_DIAGB_19 = IOMUX_PAD(0x710, 0x2ac, 6, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_ATA_DATA13__ATA_DATA_13 = IOMUX_PAD(0x714, 0x2b0, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DATA13__I2C3_SDA = IOMUX_PAD(0x714, 0x2b0, 1, 0x920, 3, NO_PAD_CTRL), + MX35_PAD_ATA_DATA13__GPIO2_26 = IOMUX_PAD(0x714, 0x2b0, 5, 0x8b0, 1, NO_PAD_CTRL), + MX35_PAD_ATA_DATA13__IPU_DIAGB_20 = IOMUX_PAD(0x714, 0x2b0, 6, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_ATA_DATA14__ATA_DATA_14 = IOMUX_PAD(0x718, 0x2b4, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DATA14__IPU_CSI_D_0 = IOMUX_PAD(0x718, 0x2b4, 1, 0x930, 2, NO_PAD_CTRL), + MX35_PAD_ATA_DATA14__KPP_ROW_0 = IOMUX_PAD(0x718, 0x2b4, 3, 0x970, 2, NO_PAD_CTRL), + MX35_PAD_ATA_DATA14__GPIO2_27 = IOMUX_PAD(0x718, 0x2b4, 5, 0x8b4, 1, NO_PAD_CTRL), + MX35_PAD_ATA_DATA14__IPU_DIAGB_21 = IOMUX_PAD(0x718, 0x2b4, 6, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_ATA_DATA15__ATA_DATA_15 = IOMUX_PAD(0x71c, 0x2b8, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DATA15__IPU_CSI_D_1 = IOMUX_PAD(0x71c, 0x2b8, 1, 0x934, 2, NO_PAD_CTRL), + MX35_PAD_ATA_DATA15__KPP_ROW_1 = IOMUX_PAD(0x71c, 0x2b8, 3, 0x974, 2, NO_PAD_CTRL), + MX35_PAD_ATA_DATA15__GPIO2_28 = IOMUX_PAD(0x71c, 0x2b8, 5, 0x8b8, 1, NO_PAD_CTRL), + MX35_PAD_ATA_DATA15__IPU_DIAGB_22 = IOMUX_PAD(0x71c, 0x2b8, 6, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_ATA_INTRQ__ATA_INTRQ = IOMUX_PAD(0x720, 0x2bc, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_INTRQ__IPU_CSI_D_2 = IOMUX_PAD(0x720, 0x2bc, 1, 0x938, 3, NO_PAD_CTRL), + MX35_PAD_ATA_INTRQ__KPP_ROW_2 = IOMUX_PAD(0x720, 0x2bc, 3, 0x978, 2, NO_PAD_CTRL), + MX35_PAD_ATA_INTRQ__GPIO2_29 = IOMUX_PAD(0x720, 0x2bc, 5, 0x8bc, 1, NO_PAD_CTRL), + MX35_PAD_ATA_INTRQ__IPU_DIAGB_23 = IOMUX_PAD(0x720, 0x2bc, 6, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_ATA_BUFF_EN__ATA_BUFFER_EN = IOMUX_PAD(0x724, 0x2c0, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_BUFF_EN__IPU_CSI_D_3 = IOMUX_PAD(0x724, 0x2c0, 1, 0x93c, 3, NO_PAD_CTRL), + MX35_PAD_ATA_BUFF_EN__KPP_ROW_3 = IOMUX_PAD(0x724, 0x2c0, 3, 0x97c, 2, NO_PAD_CTRL), + MX35_PAD_ATA_BUFF_EN__GPIO2_30 = IOMUX_PAD(0x724, 0x2c0, 5, 0x8c4, 1, NO_PAD_CTRL), + MX35_PAD_ATA_BUFF_EN__IPU_DIAGB_24 = IOMUX_PAD(0x724, 0x2c0, 6, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_ATA_DMARQ__ATA_DMARQ = IOMUX_PAD(0x728, 0x2c4, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DMARQ__IPU_CSI_D_4 = IOMUX_PAD(0x728, 0x2c4, 1, 0x940, 2, NO_PAD_CTRL), + MX35_PAD_ATA_DMARQ__KPP_COL_0 = IOMUX_PAD(0x728, 0x2c4, 3, 0x950, 2, NO_PAD_CTRL), + MX35_PAD_ATA_DMARQ__GPIO2_31 = IOMUX_PAD(0x728, 0x2c4, 5, 0x8c8, 1, NO_PAD_CTRL), + MX35_PAD_ATA_DMARQ__IPU_DIAGB_25 = IOMUX_PAD(0x728, 0x2c4, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DMARQ__ECT_CTI_TRIG_IN1_4 = IOMUX_PAD(0x728, 0x2c4, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_ATA_DA0__ATA_DA_0 = IOMUX_PAD(0x72c, 0x2c8, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DA0__IPU_CSI_D_5 = IOMUX_PAD(0x72c, 0x2c8, 1, 0x944, 2, NO_PAD_CTRL), + MX35_PAD_ATA_DA0__KPP_COL_1 = IOMUX_PAD(0x72c, 0x2c8, 3, 0x954, 2, NO_PAD_CTRL), + MX35_PAD_ATA_DA0__GPIO3_0 = IOMUX_PAD(0x72c, 0x2c8, 5, 0x8e8, 1, NO_PAD_CTRL), + MX35_PAD_ATA_DA0__IPU_DIAGB_26 = IOMUX_PAD(0x72c, 0x2c8, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DA0__ECT_CTI_TRIG_IN1_5 = IOMUX_PAD(0x72c, 0x2c8, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_ATA_DA1__ATA_DA_1 = IOMUX_PAD(0x730, 0x2cc, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DA1__IPU_CSI_D_6 = IOMUX_PAD(0x730, 0x2cc, 1, 0x948, 2, NO_PAD_CTRL), + MX35_PAD_ATA_DA1__KPP_COL_2 = IOMUX_PAD(0x730, 0x2cc, 3, 0x958, 2, NO_PAD_CTRL), + MX35_PAD_ATA_DA1__GPIO3_1 = IOMUX_PAD(0x730, 0x2cc, 5, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DA1__IPU_DIAGB_27 = IOMUX_PAD(0x730, 0x2cc, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DA1__ECT_CTI_TRIG_IN1_6 = IOMUX_PAD(0x730, 0x2cc, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_ATA_DA2__ATA_DA_2 = IOMUX_PAD(0x734, 0x2d0, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DA2__IPU_CSI_D_7 = IOMUX_PAD(0x734, 0x2d0, 1, 0x94c, 2, NO_PAD_CTRL), + MX35_PAD_ATA_DA2__KPP_COL_3 = IOMUX_PAD(0x734, 0x2d0, 3, 0x95c, 2, NO_PAD_CTRL), + MX35_PAD_ATA_DA2__GPIO3_2 = IOMUX_PAD(0x734, 0x2d0, 5, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DA2__IPU_DIAGB_28 = IOMUX_PAD(0x734, 0x2d0, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_ATA_DA2__ECT_CTI_TRIG_IN1_7 = IOMUX_PAD(0x734, 0x2d0, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_MLB_CLK__MLB_MLBCLK = IOMUX_PAD(0x738, 0x2d4, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_MLB_CLK__GPIO3_3 = IOMUX_PAD(0x738, 0x2d4, 5, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_MLB_DAT__MLB_MLBDAT = IOMUX_PAD(0x73c, 0x2d8, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_MLB_DAT__GPIO3_4 = IOMUX_PAD(0x73c, 0x2d8, 5, 0x904, 1, NO_PAD_CTRL), + + MX35_PAD_MLB_SIG__MLB_MLBSIG = IOMUX_PAD(0x740, 0x2dc, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_MLB_SIG__GPIO3_5 = IOMUX_PAD(0x740, 0x2dc, 5, 0x908, 1, NO_PAD_CTRL), + + MX35_PAD_FEC_TX_CLK__FEC_TX_CLK = IOMUX_PAD(0x744, 0x2e0, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_FEC_TX_CLK__ESDHC1_DAT4 = IOMUX_PAD(0x744, 0x2e0, 1, 0x804, 1, NO_PAD_CTRL), + MX35_PAD_FEC_TX_CLK__UART3_RXD_MUX = IOMUX_PAD(0x744, 0x2e0, 2, 0x9a0, 3, NO_PAD_CTRL), + MX35_PAD_FEC_TX_CLK__USB_TOP_USBH2_DIR = IOMUX_PAD(0x744, 0x2e0, 3, 0x9ec, 1, NO_PAD_CTRL), + MX35_PAD_FEC_TX_CLK__CSPI2_MOSI = IOMUX_PAD(0x744, 0x2e0, 4, 0x7ec, 3, NO_PAD_CTRL), + MX35_PAD_FEC_TX_CLK__GPIO3_6 = IOMUX_PAD(0x744, 0x2e0, 5, 0x90c, 1, NO_PAD_CTRL), + MX35_PAD_FEC_TX_CLK__IPU_DISPB_D12_VSYNC = IOMUX_PAD(0x744, 0x2e0, 6, 0x928, 5, NO_PAD_CTRL), + MX35_PAD_FEC_TX_CLK__ARM11P_TOP_EVNTBUS_0 = IOMUX_PAD(0x744, 0x2e0, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_FEC_RX_CLK__FEC_RX_CLK = IOMUX_PAD(0x748, 0x2e4, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_FEC_RX_CLK__ESDHC1_DAT5 = IOMUX_PAD(0x748, 0x2e4, 1, 0x808, 1, NO_PAD_CTRL), + MX35_PAD_FEC_RX_CLK__UART3_TXD_MUX = IOMUX_PAD(0x748, 0x2e4, 2, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_FEC_RX_CLK__USB_TOP_USBH2_STP = IOMUX_PAD(0x748, 0x2e4, 3, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_FEC_RX_CLK__CSPI2_MISO = IOMUX_PAD(0x748, 0x2e4, 4, 0x7e8, 3, NO_PAD_CTRL), + MX35_PAD_FEC_RX_CLK__GPIO3_7 = IOMUX_PAD(0x748, 0x2e4, 5, 0x910, 1, NO_PAD_CTRL), + MX35_PAD_FEC_RX_CLK__IPU_DISPB_SD_D_I = IOMUX_PAD(0x748, 0x2e4, 6, 0x92c, 4, NO_PAD_CTRL), + MX35_PAD_FEC_RX_CLK__ARM11P_TOP_EVNTBUS_1 = IOMUX_PAD(0x748, 0x2e4, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_FEC_RX_DV__FEC_RX_DV = IOMUX_PAD(0x74c, 0x2e8, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_FEC_RX_DV__ESDHC1_DAT6 = IOMUX_PAD(0x74c, 0x2e8, 1, 0x80c, 1, NO_PAD_CTRL), + MX35_PAD_FEC_RX_DV__UART3_RTS = IOMUX_PAD(0x74c, 0x2e8, 2, 0x99c, 2, NO_PAD_CTRL), + MX35_PAD_FEC_RX_DV__USB_TOP_USBH2_NXT = IOMUX_PAD(0x74c, 0x2e8, 3, 0x9f0, 1, NO_PAD_CTRL), + MX35_PAD_FEC_RX_DV__CSPI2_SCLK = IOMUX_PAD(0x74c, 0x2e8, 4, 0x7e0, 3, NO_PAD_CTRL), + MX35_PAD_FEC_RX_DV__GPIO3_8 = IOMUX_PAD(0x74c, 0x2e8, 5, 0x914, 1, NO_PAD_CTRL), + MX35_PAD_FEC_RX_DV__IPU_DISPB_SD_CLK = IOMUX_PAD(0x74c, 0x2e8, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_FEC_RX_DV__ARM11P_TOP_EVNTBUS_2 = IOMUX_PAD(0x74c, 0x2e8, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_FEC_COL__FEC_COL = IOMUX_PAD(0x750, 0x2ec, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_FEC_COL__ESDHC1_DAT7 = IOMUX_PAD(0x750, 0x2ec, 1, 0x810, 1, NO_PAD_CTRL), + MX35_PAD_FEC_COL__UART3_CTS = IOMUX_PAD(0x750, 0x2ec, 2, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_FEC_COL__USB_TOP_USBH2_DATA_0 = IOMUX_PAD(0x750, 0x2ec, 3, 0x9cc, 1, NO_PAD_CTRL), + MX35_PAD_FEC_COL__CSPI2_RDY = IOMUX_PAD(0x750, 0x2ec, 4, 0x7e4, 3, NO_PAD_CTRL), + MX35_PAD_FEC_COL__GPIO3_9 = IOMUX_PAD(0x750, 0x2ec, 5, 0x918, 1, NO_PAD_CTRL), + MX35_PAD_FEC_COL__IPU_DISPB_SER_RS = IOMUX_PAD(0x750, 0x2ec, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_FEC_COL__ARM11P_TOP_EVNTBUS_3 = IOMUX_PAD(0x750, 0x2ec, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_FEC_RDATA0__FEC_RDATA_0 = IOMUX_PAD(0x754, 0x2f0, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_FEC_RDATA0__PWM_PWMO = IOMUX_PAD(0x754, 0x2f0, 1, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_FEC_RDATA0__UART3_DTR = IOMUX_PAD(0x754, 0x2f0, 2, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_FEC_RDATA0__USB_TOP_USBH2_DATA_1 = IOMUX_PAD(0x754, 0x2f0, 3, 0x9d0, 1, NO_PAD_CTRL), + MX35_PAD_FEC_RDATA0__CSPI2_SS0 = IOMUX_PAD(0x754, 0x2f0, 4, 0x7f0, 2, NO_PAD_CTRL), + MX35_PAD_FEC_RDATA0__GPIO3_10 = IOMUX_PAD(0x754, 0x2f0, 5, 0x8ec, 1, NO_PAD_CTRL), + MX35_PAD_FEC_RDATA0__IPU_DISPB_CS1 = IOMUX_PAD(0x754, 0x2f0, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_FEC_RDATA0__ARM11P_TOP_EVNTBUS_4 = IOMUX_PAD(0x754, 0x2f0, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_FEC_TDATA0__FEC_TDATA_0 = IOMUX_PAD(0x758, 0x2f4, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_FEC_TDATA0__SPDIF_SPDIF_OUT1 = IOMUX_PAD(0x758, 0x2f4, 1, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_FEC_TDATA0__UART3_DSR = IOMUX_PAD(0x758, 0x2f4, 2, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_FEC_TDATA0__USB_TOP_USBH2_DATA_2 = IOMUX_PAD(0x758, 0x2f4, 3, 0x9d4, 1, NO_PAD_CTRL), + MX35_PAD_FEC_TDATA0__CSPI2_SS1 = IOMUX_PAD(0x758, 0x2f4, 4, 0x7f4, 2, NO_PAD_CTRL), + MX35_PAD_FEC_TDATA0__GPIO3_11 = IOMUX_PAD(0x758, 0x2f4, 5, 0x8f0, 1, NO_PAD_CTRL), + MX35_PAD_FEC_TDATA0__IPU_DISPB_CS0 = IOMUX_PAD(0x758, 0x2f4, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_FEC_TDATA0__ARM11P_TOP_EVNTBUS_5 = IOMUX_PAD(0x758, 0x2f4, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_FEC_TX_EN__FEC_TX_EN = IOMUX_PAD(0x75c, 0x2f8, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_FEC_TX_EN__SPDIF_SPDIF_IN1 = IOMUX_PAD(0x75c, 0x2f8, 1, 0x998, 3, NO_PAD_CTRL), + MX35_PAD_FEC_TX_EN__UART3_RI = IOMUX_PAD(0x75c, 0x2f8, 2, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_FEC_TX_EN__USB_TOP_USBH2_DATA_3 = IOMUX_PAD(0x75c, 0x2f8, 3, 0x9d8, 1, NO_PAD_CTRL), + MX35_PAD_FEC_TX_EN__GPIO3_12 = IOMUX_PAD(0x75c, 0x2f8, 5, 0x8f4, 1, NO_PAD_CTRL), + MX35_PAD_FEC_TX_EN__IPU_DISPB_PAR_RS = IOMUX_PAD(0x75c, 0x2f8, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_FEC_TX_EN__ARM11P_TOP_EVNTBUS_6 = IOMUX_PAD(0x75c, 0x2f8, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_FEC_MDC__FEC_MDC = IOMUX_PAD(0x760, 0x2fc, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_FEC_MDC__CAN2_TXCAN = IOMUX_PAD(0x760, 0x2fc, 1, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_FEC_MDC__UART3_DCD = IOMUX_PAD(0x760, 0x2fc, 2, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_FEC_MDC__USB_TOP_USBH2_DATA_4 = IOMUX_PAD(0x760, 0x2fc, 3, 0x9dc, 1, NO_PAD_CTRL), + MX35_PAD_FEC_MDC__GPIO3_13 = IOMUX_PAD(0x760, 0x2fc, 5, 0x8f8, 1, NO_PAD_CTRL), + MX35_PAD_FEC_MDC__IPU_DISPB_WR = IOMUX_PAD(0x760, 0x2fc, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_FEC_MDC__ARM11P_TOP_EVNTBUS_7 = IOMUX_PAD(0x760, 0x2fc, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_FEC_MDIO__FEC_MDIO = IOMUX_PAD(0x764, 0x300, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_FEC_MDIO__CAN2_RXCAN = IOMUX_PAD(0x764, 0x300, 1, 0x7cc, 2, NO_PAD_CTRL), + MX35_PAD_FEC_MDIO__USB_TOP_USBH2_DATA_5 = IOMUX_PAD(0x764, 0x300, 3, 0x9e0, 1, NO_PAD_CTRL), + MX35_PAD_FEC_MDIO__GPIO3_14 = IOMUX_PAD(0x764, 0x300, 5, 0x8fc, 1, NO_PAD_CTRL), + MX35_PAD_FEC_MDIO__IPU_DISPB_RD = IOMUX_PAD(0x764, 0x300, 6, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_FEC_MDIO__ARM11P_TOP_EVNTBUS_8 = IOMUX_PAD(0x764, 0x300, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_FEC_TX_ERR__FEC_TX_ERR = IOMUX_PAD(0x768, 0x304, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_FEC_TX_ERR__OWIRE_LINE = IOMUX_PAD(0x768, 0x304, 1, 0x990, 2, NO_PAD_CTRL), + MX35_PAD_FEC_TX_ERR__SPDIF_SPDIF_EXTCLK = IOMUX_PAD(0x768, 0x304, 2, 0x994, 4, NO_PAD_CTRL), + MX35_PAD_FEC_TX_ERR__USB_TOP_USBH2_DATA_6 = IOMUX_PAD(0x768, 0x304, 3, 0x9e4, 1, NO_PAD_CTRL), + MX35_PAD_FEC_TX_ERR__GPIO3_15 = IOMUX_PAD(0x768, 0x304, 5, 0x900, 1, NO_PAD_CTRL), + MX35_PAD_FEC_TX_ERR__IPU_DISPB_D0_VSYNC = IOMUX_PAD(0x768, 0x304, 6, 0x924, 3, NO_PAD_CTRL), + MX35_PAD_FEC_TX_ERR__ARM11P_TOP_EVNTBUS_9 = IOMUX_PAD(0x768, 0x304, 7, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_FEC_RX_ERR__FEC_RX_ERR = IOMUX_PAD(0x76c, 0x308, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_FEC_RX_ERR__IPU_CSI_D_0 = IOMUX_PAD(0x76c, 0x308, 1, 0x930, 3, NO_PAD_CTRL), + MX35_PAD_FEC_RX_ERR__USB_TOP_USBH2_DATA_7 = IOMUX_PAD(0x76c, 0x308, 3, 0x9e8, 1, NO_PAD_CTRL), + MX35_PAD_FEC_RX_ERR__KPP_COL_4 = IOMUX_PAD(0x76c, 0x308, 4, 0x960, 1, NO_PAD_CTRL), + MX35_PAD_FEC_RX_ERR__GPIO3_16 = IOMUX_PAD(0x76c, 0x308, 5, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_FEC_RX_ERR__IPU_DISPB_SD_D_IO = IOMUX_PAD(0x76c, 0x308, 6, 0x92c, 5, NO_PAD_CTRL), + + MX35_PAD_FEC_CRS__FEC_CRS = IOMUX_PAD(0x770, 0x30c, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_FEC_CRS__IPU_CSI_D_1 = IOMUX_PAD(0x770, 0x30c, 1, 0x934, 3, NO_PAD_CTRL), + MX35_PAD_FEC_CRS__USB_TOP_USBH2_PWR = IOMUX_PAD(0x770, 0x30c, 3, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_FEC_CRS__KPP_COL_5 = IOMUX_PAD(0x770, 0x30c, 4, 0x964, 1, NO_PAD_CTRL), + MX35_PAD_FEC_CRS__GPIO3_17 = IOMUX_PAD(0x770, 0x30c, 5, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_FEC_CRS__IPU_FLASH_STROBE = IOMUX_PAD(0x770, 0x30c, 6, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_FEC_RDATA1__FEC_RDATA_1 = IOMUX_PAD(0x774, 0x310, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_FEC_RDATA1__IPU_CSI_D_2 = IOMUX_PAD(0x774, 0x310, 1, 0x938, 4, NO_PAD_CTRL), + MX35_PAD_FEC_RDATA1__AUDMUX_AUD6_RXC = IOMUX_PAD(0x774, 0x310, 2, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_FEC_RDATA1__USB_TOP_USBH2_OC = IOMUX_PAD(0x774, 0x310, 3, 0x9f4, 2, NO_PAD_CTRL), + MX35_PAD_FEC_RDATA1__KPP_COL_6 = IOMUX_PAD(0x774, 0x310, 4, 0x968, 1, NO_PAD_CTRL), + MX35_PAD_FEC_RDATA1__GPIO3_18 = IOMUX_PAD(0x774, 0x310, 5, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_FEC_RDATA1__IPU_DISPB_BE0 = IOMUX_PAD(0x774, 0x310, 6, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_FEC_TDATA1__FEC_TDATA_1 = IOMUX_PAD(0x778, 0x314, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_FEC_TDATA1__IPU_CSI_D_3 = IOMUX_PAD(0x778, 0x314, 1, 0x93c, 4, NO_PAD_CTRL), + MX35_PAD_FEC_TDATA1__AUDMUX_AUD6_RXFS = IOMUX_PAD(0x778, 0x314, 2, 0x7bc, 1, NO_PAD_CTRL), + MX35_PAD_FEC_TDATA1__KPP_COL_7 = IOMUX_PAD(0x778, 0x314, 4, 0x96c, 1, NO_PAD_CTRL), + MX35_PAD_FEC_TDATA1__GPIO3_19 = IOMUX_PAD(0x778, 0x314, 5, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_FEC_TDATA1__IPU_DISPB_BE1 = IOMUX_PAD(0x778, 0x314, 6, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_FEC_RDATA2__FEC_RDATA_2 = IOMUX_PAD(0x77c, 0x318, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_FEC_RDATA2__IPU_CSI_D_4 = IOMUX_PAD(0x77c, 0x318, 1, 0x940, 3, NO_PAD_CTRL), + MX35_PAD_FEC_RDATA2__AUDMUX_AUD6_TXD = IOMUX_PAD(0x77c, 0x318, 2, 0x7b4, 1, NO_PAD_CTRL), + MX35_PAD_FEC_RDATA2__KPP_ROW_4 = IOMUX_PAD(0x77c, 0x318, 4, 0x980, 1, NO_PAD_CTRL), + MX35_PAD_FEC_RDATA2__GPIO3_20 = IOMUX_PAD(0x77c, 0x318, 5, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_FEC_TDATA2__FEC_TDATA_2 = IOMUX_PAD(0x780, 0x31c, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_FEC_TDATA2__IPU_CSI_D_5 = IOMUX_PAD(0x780, 0x31c, 1, 0x944, 3, NO_PAD_CTRL), + MX35_PAD_FEC_TDATA2__AUDMUX_AUD6_RXD = IOMUX_PAD(0x780, 0x31c, 2, 0x7b0, 1, NO_PAD_CTRL), + MX35_PAD_FEC_TDATA2__KPP_ROW_5 = IOMUX_PAD(0x780, 0x31c, 4, 0x984, 1, NO_PAD_CTRL), + MX35_PAD_FEC_TDATA2__GPIO3_21 = IOMUX_PAD(0x780, 0x31c, 5, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_FEC_RDATA3__FEC_RDATA_3 = IOMUX_PAD(0x784, 0x320, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_FEC_RDATA3__IPU_CSI_D_6 = IOMUX_PAD(0x784, 0x320, 1, 0x948, 3, NO_PAD_CTRL), + MX35_PAD_FEC_RDATA3__AUDMUX_AUD6_TXC = IOMUX_PAD(0x784, 0x320, 2, 0x7c0, 1, NO_PAD_CTRL), + MX35_PAD_FEC_RDATA3__KPP_ROW_6 = IOMUX_PAD(0x784, 0x320, 4, 0x988, 1, NO_PAD_CTRL), + MX35_PAD_FEC_RDATA3__GPIO3_22 = IOMUX_PAD(0x784, 0x320, 6, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_FEC_TDATA3__FEC_TDATA_3 = IOMUX_PAD(0x788, 0x324, 0, 0x0, 0, NO_PAD_CTRL), + MX35_PAD_FEC_TDATA3__IPU_CSI_D_7 = IOMUX_PAD(0x788, 0x324, 1, 0x94c, 3, NO_PAD_CTRL), + MX35_PAD_FEC_TDATA3__AUDMUX_AUD6_TXFS = IOMUX_PAD(0x788, 0x324, 2, 0x7c4, 1, NO_PAD_CTRL), + MX35_PAD_FEC_TDATA3__KPP_ROW_7 = IOMUX_PAD(0x788, 0x324, 4, 0x98c, 1, NO_PAD_CTRL), + MX35_PAD_FEC_TDATA3__GPIO3_23 = IOMUX_PAD(0x788, 0x324, 5, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_EXT_ARMCLK__CCM_EXT_ARMCLK = IOMUX_PAD(0x78c, 0x0, 0, 0x0, 0, NO_PAD_CTRL), + + MX35_PAD_TEST_MODE__TCU_TEST_MODE = IOMUX_PAD(0x790, 0x0, 0, 0x0, 0, NO_PAD_CTRL), +}; + +#endif /* __IOMUX_MX35_H__ */ diff --git a/arch/arm/include/asm/arch-mx35/iomux.h b/arch/arm/include/asm/arch-mx35/iomux.h deleted file mode 100644 index 52c15bc..0000000 --- a/arch/arm/include/asm/arch-mx35/iomux.h +++ /dev/null @@ -1,295 +0,0 @@ -/* - * (C) Copyright 2011 - * Stefano Babic, DENX Software Engineering, sbabic@denx.de. - * - * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __MACH_MX35_IOMUX_H__ -#define __MACH_MX35_IOMUX_H__ - -#include <asm/arch/imx-regs.h> - -/* - * various IOMUX functions - */ -typedef enum iomux_pin_config { - MUX_CONFIG_FUNC = 0, /* used as function */ - MUX_CONFIG_ALT1, /* used as alternate function 1 */ - MUX_CONFIG_ALT2, /* used as alternate function 2 */ - MUX_CONFIG_ALT3, /* used as alternate function 3 */ - MUX_CONFIG_ALT4, /* used as alternate function 4 */ - MUX_CONFIG_ALT5, /* used as alternate function 5 */ - MUX_CONFIG_ALT6, /* used as alternate function 6 */ - MUX_CONFIG_ALT7, /* used as alternate function 7 */ - MUX_CONFIG_SION = 0x1 << 4, /* used as LOOPBACK:MUX SION bit */ - MUX_CONFIG_GPIO = MUX_CONFIG_ALT5, /* used as GPIO */ -} iomux_pin_cfg_t; - -/* - * various IOMUX pad functions - */ -typedef enum iomux_pad_config { - PAD_CTL_DRV_3_3V = 0x0 << 13, - PAD_CTL_DRV_1_8V = 0x1 << 13, - PAD_CTL_HYS_CMOS = 0x0 << 8, - PAD_CTL_HYS_SCHMITZ = 0x1 << 8, - PAD_CTL_PKE_NONE = 0x0 << 7, - PAD_CTL_PKE_ENABLE = 0x1 << 7, - PAD_CTL_PUE_KEEPER = 0x0 << 6, - PAD_CTL_PUE_PUD = 0x1 << 6, - PAD_CTL_100K_PD = 0x0 << 4, - PAD_CTL_47K_PU = 0x1 << 4, - PAD_CTL_100K_PU = 0x2 << 4, - PAD_CTL_22K_PU = 0x3 << 4, - PAD_CTL_ODE_CMOS = 0x0 << 3, - PAD_CTL_ODE_OpenDrain = 0x1 << 3, - PAD_CTL_DRV_NORMAL = 0x0 << 1, - PAD_CTL_DRV_HIGH = 0x1 << 1, - PAD_CTL_DRV_MAX = 0x2 << 1, - PAD_CTL_SRE_SLOW = 0x0 << 0, - PAD_CTL_SRE_FAST = 0x1 << 0 -} iomux_pad_config_t; - -/* - * various IOMUX general purpose functions - */ -typedef enum iomux_gp_func { - MUX_SDCTL_CSD0_SEL = 0x1 << 0, - MUX_SDCTL_CSD1_SEL = 0x1 << 1, - MUX_TAMPER_DETECT_EN = 0x1 << 2, -} iomux_gp_func_t; - -/* - * various IOMUX input select register index - */ -typedef enum iomux_input_select { - MUX_IN_AMX_P5_RXCLK = 0, - MUX_IN_AMX_P5_RXFS, - MUX_IN_AMX_P6_DA, - MUX_IN_AMX_P6_DB, - MUX_IN_AMX_P6_RXCLK, - MUX_IN_AMX_P6_RXFS, - MUX_IN_AMX_P6_TXCLK, - MUX_IN_AMX_P6_TXFS, - MUX_IN_CAN1_CANRX, - MUX_IN_CAN2_CANRX, - MUX_IN_CCM_32K_MUXED, - MUX_IN_CCM_PMIC_RDY, - MUX_IN_CSPI1_SS2_B, - MUX_IN_CSPI1_SS3_B, - MUX_IN_CSPI2_CLK_IN, - MUX_IN_CSPI2_DATAREADY_B, - MUX_IN_CSPI2_MISO, - MUX_IN_CSPI2_MOSI, - MUX_IN_CSPI2_SS0_B, - MUX_IN_CSPI2_SS1_B, - MUX_IN_CSPI2_SS2_B, - MUX_IN_CSPI2_SS3_B, - MUX_IN_EMI_WEIM_DTACK_B, - MUX_IN_ESDHC1_DAT4_IN, - MUX_IN_ESDHC1_DAT5_IN, - MUX_IN_ESDHC1_DAT6_IN, - MUX_IN_ESDHC1_DAT7_IN, - MUX_IN_ESDHC3_CARD_CLK_IN, - MUX_IN_ESDHC3_CMD_IN, - MUX_IN_ESDHC3_DAT0, - MUX_IN_ESDHC3_DAT1, - MUX_IN_ESDHC3_DAT2, - MUX_IN_ESDHC3_DAT3, - MUX_IN_GPIO1_IN_0, - MUX_IN_GPIO1_IN_10, - MUX_IN_GPIO1_IN_11, - MUX_IN_GPIO1_IN_1, - MUX_IN_GPIO1_IN_20, - MUX_IN_GPIO1_IN_21, - MUX_IN_GPIO1_IN_22, - MUX_IN_GPIO1_IN_2, - MUX_IN_GPIO1_IN_3, - MUX_IN_GPIO1_IN_4, - MUX_IN_GPIO1_IN_5, - MUX_IN_GPIO1_IN_6, - MUX_IN_GPIO1_IN_7, - MUX_IN_GPIO1_IN_8, - MUX_IN_GPIO1_IN_9, - MUX_IN_GPIO2_IN_0, - MUX_IN_GPIO2_IN_10, - MUX_IN_GPIO2_IN_11, - MUX_IN_GPIO2_IN_12, - MUX_IN_GPIO2_IN_13, - MUX_IN_GPIO2_IN_14, - MUX_IN_GPIO2_IN_15, - MUX_IN_GPIO2_IN_16, - MUX_IN_GPIO2_IN_17, - MUX_IN_GPIO2_IN_18, - MUX_IN_GPIO2_IN_19, - MUX_IN_GPIO2_IN_20, - MUX_IN_GPIO2_IN_21, - MUX_IN_GPIO2_IN_22, - MUX_IN_GPIO2_IN_23, - MUX_IN_GPIO2_IN_24, - MUX_IN_GPIO2_IN_25, - MUX_IN_GPIO2_IN_26, - MUX_IN_GPIO2_IN_27, - MUX_IN_GPIO2_IN_28, - MUX_IN_GPIO2_IN_29, - MUX_IN_GPIO2_IN_2, - MUX_IN_GPIO2_IN_30, - MUX_IN_GPIO2_IN_31, - MUX_IN_GPIO2_IN_3, - MUX_IN_GPIO2_IN_4, - MUX_IN_GPIO2_IN_5, - MUX_IN_GPIO2_IN_6, - MUX_IN_GPIO2_IN_7, - MUX_IN_GPIO2_IN_8, - MUX_IN_GPIO2_IN_9, - MUX_IN_GPIO3_IN_0, - MUX_IN_GPIO3_IN_10, - MUX_IN_GPIO3_IN_11, - MUX_IN_GPIO3_IN_12, - MUX_IN_GPIO3_IN_13, - MUX_IN_GPIO3_IN_14, - MUX_IN_GPIO3_IN_15, - MUX_IN_GPIO3_IN_4, - MUX_IN_GPIO3_IN_5, - MUX_IN_GPIO3_IN_6, - MUX_IN_GPIO3_IN_7, - MUX_IN_GPIO3_IN_8, - MUX_IN_GPIO3_IN_9, - MUX_IN_I2C3_SCL_IN, - MUX_IN_I2C3_SDA_IN, - MUX_IN_IPU_DISPB_D0_VSYNC, - MUX_IN_IPU_DISPB_D12_VSYNC, - MUX_IN_IPU_DISPB_SD_D, - MUX_IN_IPU_SENSB_DATA_0, - MUX_IN_IPU_SENSB_DATA_1, - MUX_IN_IPU_SENSB_DATA_2, - MUX_IN_IPU_SENSB_DATA_3, - MUX_IN_IPU_SENSB_DATA_4, - MUX_IN_IPU_SENSB_DATA_5, - MUX_IN_IPU_SENSB_DATA_6, - MUX_IN_IPU_SENSB_DATA_7, - MUX_IN_KPP_COL_0, - MUX_IN_KPP_COL_1, - MUX_IN_KPP_COL_2, - MUX_IN_KPP_COL_3, - MUX_IN_KPP_COL_4, - MUX_IN_KPP_COL_5, - MUX_IN_KPP_COL_6, - MUX_IN_KPP_COL_7, - MUX_IN_KPP_ROW_0, - MUX_IN_KPP_ROW_1, - MUX_IN_KPP_ROW_2, - MUX_IN_KPP_ROW_3, - MUX_IN_KPP_ROW_4, - MUX_IN_KPP_ROW_5, - MUX_IN_KPP_ROW_6, - MUX_IN_KPP_ROW_7, - MUX_IN_OWIRE_BATTERY_LINE, - MUX_IN_SPDIF_HCKT_CLK2, - MUX_IN_SPDIF_SPDIF_IN1, - MUX_IN_UART3_UART_RTS_B, - MUX_IN_UART3_UART_RXD_MUX, - MUX_IN_USB_OTG_DATA_0, - MUX_IN_USB_OTG_DATA_1, - MUX_IN_USB_OTG_DATA_2, - MUX_IN_USB_OTG_DATA_3, - MUX_IN_USB_OTG_DATA_4, - MUX_IN_USB_OTG_DATA_5, - MUX_IN_USB_OTG_DATA_6, - MUX_IN_USB_OTG_DATA_7, - MUX_IN_USB_OTG_DIR, - MUX_IN_USB_OTG_NXT, - MUX_IN_USB_UH2_DATA_0, - MUX_IN_USB_UH2_DATA_1, - MUX_IN_USB_UH2_DATA_2, - MUX_IN_USB_UH2_DATA_3, - MUX_IN_USB_UH2_DATA_4, - MUX_IN_USB_UH2_DATA_5, - MUX_IN_USB_UH2_DATA_6, - MUX_IN_USB_UH2_DATA_7, - MUX_IN_USB_UH2_DIR, - MUX_IN_USB_UH2_NXT, - MUX_IN_USB_UH2_USB_OC, -} iomux_input_select_t; - -/* - * various IOMUX input functions - */ -typedef enum iomux_input_config { - INPUT_CTL_PATH0 = 0x0, - INPUT_CTL_PATH1, - INPUT_CTL_PATH2, - INPUT_CTL_PATH3, - INPUT_CTL_PATH4, - INPUT_CTL_PATH5, - INPUT_CTL_PATH6, - INPUT_CTL_PATH7, -} iomux_input_cfg_t; - -/* - * Request ownership for an IO pin. This function has to be the first one - * being called before that pin is used. The caller has to check the - * return value to make sure it returns 0. - * - * @param pin a name defined by iomux_pin_name_t - * @param cfg an input function as defined in iomux_pin_cfg_t - * - * @return 0 if successful; Non-zero otherwise - */ -void mxc_request_iomux(iomux_pin_name_t pin, iomux_pin_cfg_t cfg); - -/* - * Release ownership for an IO pin - * - * @param pin a name defined by iomux_pin_name_t - * @param cfg an input function as defined in iomux_pin_cfg_t - */ -void mxc_free_iomux(iomux_pin_name_t pin, iomux_pin_cfg_t cfg); - -/* - * This function enables/disables the general purpose function for a particular - * signal. - * - * @param gp one signal as defined in iomux_gp_func_t - * @param en 1 to enable; 0 to disable - */ -void mxc_iomux_set_gpr(iomux_gp_func_t gp, int en); - -/* - * This function configures the pad value for a IOMUX pin. - * - * @param pin a pin number as defined in iomux_pin_name_t - * @param config the ORed value of elements defined in - * iomux_pad_config_t - */ -void mxc_iomux_set_pad(iomux_pin_name_t pin, u32 config); - -/* - * This function configures input path. - * - * @param input index of input select register as defined in - * iomux_input_select_t - * @param config the binary value of elements defined in - * iomux_input_cfg_t - */ -void mxc_iomux_set_input(iomux_input_select_t input, u32 config); -#endif diff --git a/arch/arm/include/asm/arch-mx35/mx35_pins.h b/arch/arm/include/asm/arch-mx35/mx35_pins.h deleted file mode 100644 index 00e5e75..0000000 --- a/arch/arm/include/asm/arch-mx35/mx35_pins.h +++ /dev/null @@ -1,353 +0,0 @@ -/* - * (C) Copyright 2011 - * Stefano Babic, DENX Software Engineering, sbabic@denx.de. - * - * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_MXC_MX35_PINS_H__ -#define __ASM_ARCH_MXC_MX35_PINS_H__ - -/*! - * @file arch-mxc/mx35_pins.h - * - * @brief MX35 I/O Pin List - * - * @ingroup GPIO_MX35 - */ - -#ifndef __ASSEMBLY__ - -/*! - * @name IOMUX/PAD Bit field definitions - */ - -/*! @{ */ - -/*! - * In order to identify pins more effectively, each mux-controlled pin's - * enumerated value is constructed in the following way: - * - * ------------------------------------------------------------------- - * 31-29 | 28 - 24 |23 - 21| 20 - 10| 9 - 0 - * ------------------------------------------------------------------- - * IO_P | IO_I | RSVD | PAD_I | MUX_I - * ------------------------------------------------------------------- - * - * Bit 0 to 7 contains MUX_I used to identify the register - * offset (base is IOMUX_module_base ) defined in the Section - * "sw_pad_ctl & sw_mux_ctl details" of the IC Spec. The similar field - * definitions are used for the pad control register.the MX35_PIN_A0 is - * defined in the enumeration: ( 0x28 << MUX_I) |( 0x368 << PAD_I) - * So the absolute address is: IOMUX_module_base + 0x28. - * The pad control register offset is: 0x368. - */ - -/*! - * Starting bit position within each entry of \b iomux_pins to represent the - * MUX control register offset - */ -#define MUX_I 0 -/*! - * Starting bit position within each entry of \b iomux_pins to represent the - * PAD control register offset - */ -#define PAD_I 10 - -/*! - * Starting bit position within each entry of \b iomux_pins to represent the - * reserved filed - */ -#define RSVD_I 21 - -#define MUX_IO_P 29 -#define MUX_IO_I 24 -#define IOMUX_TO_GPIO(pin) ((((unsigned int)pin >> MUX_IO_P) * \ - GPIO_NUM_PIN) + ((pin >> MUX_IO_I) &\ - ((1 << (MUX_IO_P - MUX_IO_I)) - 1))) -#define IOMUX_TO_IRQ(pin) (MXC_GPIO_INT_BASE + IOMUX_TO_GPIO(pin)) - -#define NON_GPIO_I 0x7 -#define PIN_TO_MUX_MASK ((1<<(PAD_I - MUX_I)) - 1) -#define PIN_TO_PAD_MASK ((1<<(RSVD_I - PAD_I)) - 1) -#define NON_MUX_I PIN_TO_MUX_MASK - -#define _MXC_BUILD_PIN(gp, gi, mi, pi) \ - (((gp) << MUX_IO_P) | ((gi) << MUX_IO_I) | \ - ((mi) << MUX_I) | ((pi) << PAD_I)) - -#define _MXC_BUILD_GPIO_PIN(gp, gi, mi, pi) \ - _MXC_BUILD_PIN(gp, gi, mi, pi) - -#define _MXC_BUILD_NON_GPIO_PIN(mi, pi) \ - _MXC_BUILD_PIN(NON_GPIO_I, 0, mi, pi) - -#define PIN_TO_IOMUX_MUX(pin) ((pin >> MUX_I) & PIN_TO_MUX_MASK) -#define PIN_TO_IOMUX_PAD(pin) ((pin >> PAD_I) & PIN_TO_PAD_MASK) - -/*! @} End IOMUX/PAD Bit field definitions */ - -/*! - * This enumeration is constructed based on the Section - * "sw_pad_ctl & sw_mux_ctl details" of the MX35 IC Spec. Each enumerated - * value is constructed based on the rules described above. - */ -typedef enum iomux_pins { - MX35_PIN_CAPTURE = _MXC_BUILD_GPIO_PIN(0, 4, 0x4, 0x328), - MX35_PIN_COMPARE = _MXC_BUILD_GPIO_PIN(0, 5, 0x8, 0x32C), - MX35_PIN_WATCHDOG_RST = _MXC_BUILD_GPIO_PIN(0, 6, 0xC, 0x330), - MX35_PIN_GPIO1_0 = _MXC_BUILD_GPIO_PIN(0, 0, 0x10, 0x334), - MX35_PIN_GPIO1_1 = _MXC_BUILD_GPIO_PIN(0, 1, 0x14, 0x338), - MX35_PIN_GPIO2_0 = _MXC_BUILD_GPIO_PIN(1, 0, 0x18, 0x33C), - MX35_PIN_GPIO3_0 = _MXC_BUILD_GPIO_PIN(2, 1, 0x1C, 0x340), - MX35_PIN_CLKO = _MXC_BUILD_GPIO_PIN(0, 8, 0x20, 0x34C), - - MX35_PIN_POWER_FAIL = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x360), - MX35_PIN_VSTBY = _MXC_BUILD_GPIO_PIN(0, 7, 0x24, 0x364), - MX35_PIN_A0 = _MXC_BUILD_NON_GPIO_PIN(0x28, 0x368), - MX35_PIN_A1 = _MXC_BUILD_NON_GPIO_PIN(0x2C, 0x36C), - MX35_PIN_A2 = _MXC_BUILD_NON_GPIO_PIN(0x30, 0x370), - MX35_PIN_A3 = _MXC_BUILD_NON_GPIO_PIN(0x34, 0x374), - MX35_PIN_A4 = _MXC_BUILD_NON_GPIO_PIN(0x38, 0x378), - MX35_PIN_A5 = _MXC_BUILD_NON_GPIO_PIN(0x3C, 0x37C), - MX35_PIN_A6 = _MXC_BUILD_NON_GPIO_PIN(0x40, 0x380), - MX35_PIN_A7 = _MXC_BUILD_NON_GPIO_PIN(0x44, 0x384), - MX35_PIN_A8 = _MXC_BUILD_NON_GPIO_PIN(0x48, 0x388), - MX35_PIN_A9 = _MXC_BUILD_NON_GPIO_PIN(0x4C, 0x38C), - MX35_PIN_A10 = _MXC_BUILD_NON_GPIO_PIN(0x50, 0x390), - MX35_PIN_MA10 = _MXC_BUILD_NON_GPIO_PIN(0x54, 0x394), - MX35_PIN_A11 = _MXC_BUILD_NON_GPIO_PIN(0x58, 0x398), - MX35_PIN_A12 = _MXC_BUILD_NON_GPIO_PIN(0x5C, 0x39C), - MX35_PIN_A13 = _MXC_BUILD_NON_GPIO_PIN(0x60, 0x3A0), - MX35_PIN_A14 = _MXC_BUILD_NON_GPIO_PIN(0x64, 0x3A4), - MX35_PIN_A15 = _MXC_BUILD_NON_GPIO_PIN(0x68, 0x3A8), - MX35_PIN_A16 = _MXC_BUILD_NON_GPIO_PIN(0x6C, 0x3AC), - MX35_PIN_A17 = _MXC_BUILD_NON_GPIO_PIN(0x70, 0x3B0), - MX35_PIN_A18 = _MXC_BUILD_NON_GPIO_PIN(0x74, 0x3B4), - MX35_PIN_A19 = _MXC_BUILD_NON_GPIO_PIN(0x78, 0x3B8), - MX35_PIN_A20 = _MXC_BUILD_NON_GPIO_PIN(0x7C, 0x3BC), - MX35_PIN_A21 = _MXC_BUILD_NON_GPIO_PIN(0x80, 0x3C0), - MX35_PIN_A22 = _MXC_BUILD_NON_GPIO_PIN(0x84, 0x3C4), - MX35_PIN_A23 = _MXC_BUILD_NON_GPIO_PIN(0x88, 0x3C8), - MX35_PIN_A24 = _MXC_BUILD_NON_GPIO_PIN(0x8C, 0x3CC), - MX35_PIN_A25 = _MXC_BUILD_NON_GPIO_PIN(0x90, 0x3D0), - - MX35_PIN_EB0 = _MXC_BUILD_NON_GPIO_PIN(0x94, 0x46C), - MX35_PIN_EB1 = _MXC_BUILD_NON_GPIO_PIN(0x98, 0x470), - MX35_PIN_OE = _MXC_BUILD_NON_GPIO_PIN(0x9C, 0x474), - MX35_PIN_CS0 = _MXC_BUILD_NON_GPIO_PIN(0xA0, 0x478), - MX35_PIN_CS1 = _MXC_BUILD_NON_GPIO_PIN(0xA4, 0x47C), - MX35_PIN_CS2 = _MXC_BUILD_NON_GPIO_PIN(0xA8, 0x480), - MX35_PIN_CS3 = _MXC_BUILD_NON_GPIO_PIN(0xAC, 0x484), - MX35_PIN_CS4 = _MXC_BUILD_GPIO_PIN(0, 20, 0xB0, 0x488), - MX35_PIN_CS5 = _MXC_BUILD_GPIO_PIN(0, 21, 0xB4, 0x48C), - MX35_PIN_NFCE_B = _MXC_BUILD_GPIO_PIN(0, 22, 0xB8, 0x490), - - MX35_PIN_LBA = _MXC_BUILD_NON_GPIO_PIN(0xBC, 0x498), - MX35_PIN_BCLK = _MXC_BUILD_NON_GPIO_PIN(0xC0, 0x49C), - MX35_PIN_RW = _MXC_BUILD_NON_GPIO_PIN(0xC4, 0x4A0), - - MX35_PIN_NFWE_B = _MXC_BUILD_GPIO_PIN(0, 18, 0xC8, 0x4CC), - MX35_PIN_NFRE_B = _MXC_BUILD_GPIO_PIN(0, 19, 0xCC, 0x4D0), - MX35_PIN_NFALE = _MXC_BUILD_GPIO_PIN(0, 20, 0xD0, 0x4D4), - MX35_PIN_NFCLE = _MXC_BUILD_GPIO_PIN(0, 21, 0xD4, 0x4D8), - MX35_PIN_NFWP_B = _MXC_BUILD_GPIO_PIN(0, 22, 0xD8, 0x4DC), - MX35_PIN_NFRB = _MXC_BUILD_GPIO_PIN(0, 23, 0xDC, 0x4E0), - - MX35_PIN_D15 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x4E4), - MX35_PIN_D14 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x4E8), - MX35_PIN_D13 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x4EC), - MX35_PIN_D12 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x4F0), - MX35_PIN_D11 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x4F4), - MX35_PIN_D10 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x4F8), - MX35_PIN_D9 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x4FC), - MX35_PIN_D8 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x500), - MX35_PIN_D7 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x504), - MX35_PIN_D6 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x508), - MX35_PIN_D5 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x50C), - MX35_PIN_D4 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x510), - MX35_PIN_D3 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x514), - MX35_PIN_D2 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x518), - MX35_PIN_D1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x51C), - MX35_PIN_D0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x520), - - MX35_PIN_CSI_D8 = _MXC_BUILD_GPIO_PIN(0, 20, 0xE0, 0x524), - MX35_PIN_CSI_D9 = _MXC_BUILD_GPIO_PIN(0, 21, 0xE4, 0x528), - MX35_PIN_CSI_D10 = _MXC_BUILD_GPIO_PIN(0, 22, 0xE8, 0x52C), - MX35_PIN_CSI_D11 = _MXC_BUILD_GPIO_PIN(0, 23, 0xEC, 0x530), - MX35_PIN_CSI_D12 = _MXC_BUILD_GPIO_PIN(0, 24, 0xF0, 0x534), - MX35_PIN_CSI_D13 = _MXC_BUILD_GPIO_PIN(0, 25, 0xF4, 0x538), - MX35_PIN_CSI_D14 = _MXC_BUILD_GPIO_PIN(0, 26, 0xF8, 0x53C), - MX35_PIN_CSI_D15 = _MXC_BUILD_GPIO_PIN(0, 27, 0xFC, 0x540), - MX35_PIN_CSI_MCLK = _MXC_BUILD_GPIO_PIN(0, 28, 0x100, 0x544), - MX35_PIN_CSI_VSYNC = _MXC_BUILD_GPIO_PIN(0, 29, 0x104, 0x548), - MX35_PIN_CSI_HSYNC = _MXC_BUILD_GPIO_PIN(0, 30, 0x108, 0x54C), - MX35_PIN_CSI_PIXCLK = _MXC_BUILD_GPIO_PIN(0, 31, 0x10C, 0x550), - - MX35_PIN_I2C1_CLK = _MXC_BUILD_GPIO_PIN(1, 24, 0x110, 0x554), - MX35_PIN_I2C1_DAT = _MXC_BUILD_GPIO_PIN(1, 25, 0x114, 0x558), - MX35_PIN_I2C2_CLK = _MXC_BUILD_GPIO_PIN(1, 26, 0x118, 0x55C), - MX35_PIN_I2C2_DAT = _MXC_BUILD_GPIO_PIN(1, 27, 0x11C, 0x560), - - MX35_PIN_STXD4 = _MXC_BUILD_GPIO_PIN(1, 28, 0x120, 0x564), - MX35_PIN_SRXD4 = _MXC_BUILD_GPIO_PIN(1, 29, 0x124, 0x568), - MX35_PIN_SCK4 = _MXC_BUILD_GPIO_PIN(1, 30, 0x128, 0x56C), - MX35_PIN_STXFS4 = _MXC_BUILD_GPIO_PIN(1, 31, 0x12C, 0x570), - MX35_PIN_STXD5 = _MXC_BUILD_GPIO_PIN(0, 0, 0x130, 0x574), - MX35_PIN_SRXD5 = _MXC_BUILD_GPIO_PIN(0, 1, 0x134, 0x578), - MX35_PIN_SCK5 = _MXC_BUILD_GPIO_PIN(0, 2, 0x138, 0x57C), - MX35_PIN_STXFS5 = _MXC_BUILD_GPIO_PIN(0, 3, 0x13C, 0x580), - - MX35_PIN_SCKR = _MXC_BUILD_GPIO_PIN(0, 4, 0x140, 0x584), - MX35_PIN_FSR = _MXC_BUILD_GPIO_PIN(0, 5, 0x144, 0x588), - MX35_PIN_HCKR = _MXC_BUILD_GPIO_PIN(0, 6, 0x148, 0x58C), - MX35_PIN_SCKT = _MXC_BUILD_GPIO_PIN(0, 7, 0x14C, 0x590), - MX35_PIN_FST = _MXC_BUILD_GPIO_PIN(0, 8, 0x150, 0x594), - MX35_PIN_HCKT = _MXC_BUILD_GPIO_PIN(0, 9, 0x154, 0x598), - MX35_PIN_TX5_RX0 = _MXC_BUILD_GPIO_PIN(0, 10, 0x158, 0x59C), - MX35_PIN_TX4_RX1 = _MXC_BUILD_GPIO_PIN(0, 11, 0x15C, 0x5A0), - MX35_PIN_TX3_RX2 = _MXC_BUILD_GPIO_PIN(0, 12, 0x160, 0x5A4), - MX35_PIN_TX2_RX3 = _MXC_BUILD_GPIO_PIN(0, 13, 0x164, 0x5A8), - MX35_PIN_TX1 = _MXC_BUILD_GPIO_PIN(0, 14, 0x168, 0x5AC), - MX35_PIN_TX0 = _MXC_BUILD_GPIO_PIN(0, 15, 0x16C, 0x5B0), - - MX35_PIN_CSPI1_MOSI = _MXC_BUILD_GPIO_PIN(0, 16, 0x170, 0x5B4), - MX35_PIN_CSPI1_MISO = _MXC_BUILD_GPIO_PIN(0, 17, 0x174, 0x5B8), - MX35_PIN_CSPI1_SS0 = _MXC_BUILD_GPIO_PIN(0, 18, 0x178, 0x5BC), - MX35_PIN_CSPI1_SS1 = _MXC_BUILD_GPIO_PIN(0, 19, 0x17C, 0x5C0), - MX35_PIN_CSPI1_SCLK = _MXC_BUILD_GPIO_PIN(2, 4, 0x180, 0x5C4), - MX35_PIN_CSPI1_SPI_RDY = _MXC_BUILD_GPIO_PIN(2, 5, 0x184, 0x5C8), - - MX35_PIN_RXD1 = _MXC_BUILD_GPIO_PIN(2, 6, 0x188, 0x5CC), - MX35_PIN_TXD1 = _MXC_BUILD_GPIO_PIN(2, 7, 0x18C, 0x5D0), - MX35_PIN_RTS1 = _MXC_BUILD_GPIO_PIN(2, 8, 0x190, 0x5D4), - MX35_PIN_CTS1 = _MXC_BUILD_GPIO_PIN(2, 9, 0x194, 0x5D8), - MX35_PIN_RXD2 = _MXC_BUILD_GPIO_PIN(2, 10, 0x198, 0x5DC), - MX35_PIN_TXD2 = _MXC_BUILD_GPIO_PIN(1, 11, 0x19C, 0x5E0), - MX35_PIN_RTS2 = _MXC_BUILD_GPIO_PIN(1, 12, 0x1A0, 0x5E4), - MX35_PIN_CTS2 = _MXC_BUILD_GPIO_PIN(1, 13, 0x1A4, 0x5E8), - - MX35_PIN_USBOTG_PWR = _MXC_BUILD_GPIO_PIN(2, 14, 0x1A8, 0x60C), - MX35_PIN_USBOTG_OC = _MXC_BUILD_GPIO_PIN(2, 15, 0x1AC, 0x610), - - MX35_PIN_LD0 = _MXC_BUILD_GPIO_PIN(1, 0, 0x1B0, 0x614), - MX35_PIN_LD1 = _MXC_BUILD_GPIO_PIN(1, 1, 0x1B4, 0x618), - MX35_PIN_LD2 = _MXC_BUILD_GPIO_PIN(1, 2, 0x1B8, 0x61C), - MX35_PIN_LD3 = _MXC_BUILD_GPIO_PIN(1, 3, 0x1BC, 0x620), - MX35_PIN_LD4 = _MXC_BUILD_GPIO_PIN(1, 4, 0x1C0, 0x624), - MX35_PIN_LD5 = _MXC_BUILD_GPIO_PIN(1, 5, 0x1C4, 0x628), - MX35_PIN_LD6 = _MXC_BUILD_GPIO_PIN(1, 6, 0x1C8, 0x62C), - MX35_PIN_LD7 = _MXC_BUILD_GPIO_PIN(1, 7, 0x1CC, 0x630), - MX35_PIN_LD8 = _MXC_BUILD_GPIO_PIN(1, 8, 0x1D0, 0x634), - MX35_PIN_LD9 = _MXC_BUILD_GPIO_PIN(1, 9, 0x1D4, 0x638), - MX35_PIN_LD10 = _MXC_BUILD_GPIO_PIN(1, 10, 0x1D8, 0x63C), - MX35_PIN_LD11 = _MXC_BUILD_GPIO_PIN(1, 11, 0x1DC, 0x640), - MX35_PIN_LD12 = _MXC_BUILD_GPIO_PIN(1, 12, 0x1E0, 0x644), - MX35_PIN_LD13 = _MXC_BUILD_GPIO_PIN(1, 13, 0x1E4, 0x648), - MX35_PIN_LD14 = _MXC_BUILD_GPIO_PIN(1, 14, 0x1E8, 0x64C), - MX35_PIN_LD15 = _MXC_BUILD_GPIO_PIN(1, 15, 0x1EC, 0x650), - MX35_PIN_LD16 = _MXC_BUILD_GPIO_PIN(1, 16, 0x1F0, 0x654), - MX35_PIN_LD17 = _MXC_BUILD_GPIO_PIN(1, 17, 0x1F4, 0x658), - MX35_PIN_LD18 = _MXC_BUILD_GPIO_PIN(2, 24, 0x1F8, 0x65C), - MX35_PIN_LD19 = _MXC_BUILD_GPIO_PIN(2, 25, 0x1FC, 0x660), - MX35_PIN_LD20 = _MXC_BUILD_GPIO_PIN(2, 26, 0x200, 0x664), - MX35_PIN_LD21 = _MXC_BUILD_GPIO_PIN(2, 27, 0x204, 0x668), - MX35_PIN_LD22 = _MXC_BUILD_GPIO_PIN(2, 28, 0x208, 0x66C), - MX35_PIN_LD23 = _MXC_BUILD_GPIO_PIN(2, 29, 0x20C, 0x670), - - MX35_PIN_D3_HSYNC = _MXC_BUILD_GPIO_PIN(2, 30, 0x210, 0x674), - MX35_PIN_D3_FPSHIFT = _MXC_BUILD_GPIO_PIN(2, 31, 0x214, 0x678), - MX35_PIN_D3_DRDY = _MXC_BUILD_GPIO_PIN(0, 0, 0x218, 0x67C), - MX35_PIN_CONTRAST = _MXC_BUILD_GPIO_PIN(0, 1, 0x21C, 0x680), - MX35_PIN_D3_VSYNC = _MXC_BUILD_GPIO_PIN(0, 2, 0x220, 0x684), - MX35_PIN_D3_REV = _MXC_BUILD_GPIO_PIN(0, 3, 0x224, 0x688), - MX35_PIN_D3_CLS = _MXC_BUILD_GPIO_PIN(0, 4, 0x228, 0x68C), - MX35_PIN_D3_SPL = _MXC_BUILD_GPIO_PIN(0, 5, 0x22C, 0x690), - - MX35_PIN_SD1_CMD = _MXC_BUILD_GPIO_PIN(0, 6, 0x230, 0x694), - MX35_PIN_SD1_CLK = _MXC_BUILD_GPIO_PIN(0, 7, 0x234, 0x698), - MX35_PIN_SD1_DATA0 = _MXC_BUILD_GPIO_PIN(0, 8, 0x238, 0x69C), - MX35_PIN_SD1_DATA1 = _MXC_BUILD_GPIO_PIN(0, 9, 0x23C, 0x6A0), - MX35_PIN_SD1_DATA2 = _MXC_BUILD_GPIO_PIN(0, 10, 0x240, 0x6A4), - MX35_PIN_SD1_DATA3 = _MXC_BUILD_GPIO_PIN(0, 11, 0x244, 0x6A8), - MX35_PIN_SD2_CMD = _MXC_BUILD_GPIO_PIN(1, 0, 0x248, 0x6AC), - MX35_PIN_SD2_CLK = _MXC_BUILD_GPIO_PIN(1, 1, 0x24C, 0x6B0), - MX35_PIN_SD2_DATA0 = _MXC_BUILD_GPIO_PIN(1, 2, 0x250, 0x6B4), - MX35_PIN_SD2_DATA1 = _MXC_BUILD_GPIO_PIN(1, 3, 0x254, 0x6B8), - MX35_PIN_SD2_DATA2 = _MXC_BUILD_GPIO_PIN(1, 4, 0x258, 0x6BC), - MX35_PIN_SD2_DATA3 = _MXC_BUILD_GPIO_PIN(1, 5, 0x25C, 0x6C0), - - MX35_PIN_ATA_CS0 = _MXC_BUILD_GPIO_PIN(1, 6, 0x260, 0x6C4), - MX35_PIN_ATA_CS1 = _MXC_BUILD_GPIO_PIN(1, 7, 0x264, 0x6C8), - MX35_PIN_ATA_DIOR = _MXC_BUILD_GPIO_PIN(1, 8, 0x268, 0x6CC), - MX35_PIN_ATA_DIOW = _MXC_BUILD_GPIO_PIN(1, 9, 0x26C, 0x6D0), - MX35_PIN_ATA_DMACK = _MXC_BUILD_GPIO_PIN(1, 10, 0x270, 0x6D4), - MX35_PIN_ATA_RESET_B = _MXC_BUILD_GPIO_PIN(1, 11, 0x274, 0x6D8), - MX35_PIN_ATA_IORDY = _MXC_BUILD_GPIO_PIN(1, 12, 0x278, 0x6DC), - MX35_PIN_ATA_DATA0 = _MXC_BUILD_GPIO_PIN(1, 13, 0x27C, 0x6E0), - MX35_PIN_ATA_DATA1 = _MXC_BUILD_GPIO_PIN(1, 14, 0x280, 0x6E4), - MX35_PIN_ATA_DATA2 = _MXC_BUILD_GPIO_PIN(1, 15, 0x284, 0x6E8), - MX35_PIN_ATA_DATA3 = _MXC_BUILD_GPIO_PIN(1, 16, 0x288, 0x6EC), - MX35_PIN_ATA_DATA4 = _MXC_BUILD_GPIO_PIN(1, 17, 0x28C, 0x6F0), - MX35_PIN_ATA_DATA5 = _MXC_BUILD_GPIO_PIN(1, 18, 0x290, 0x6F4), - MX35_PIN_ATA_DATA6 = _MXC_BUILD_GPIO_PIN(1, 19, 0x294, 0x6F8), - MX35_PIN_ATA_DATA7 = _MXC_BUILD_GPIO_PIN(1, 20, 0x298, 0x6FC), - MX35_PIN_ATA_DATA8 = _MXC_BUILD_GPIO_PIN(1, 21, 0x29C, 0x700), - MX35_PIN_ATA_DATA9 = _MXC_BUILD_GPIO_PIN(1, 22, 0x2A0, 0x704), - MX35_PIN_ATA_DATA10 = _MXC_BUILD_GPIO_PIN(1, 23, 0x2A4, 0x708), - MX35_PIN_ATA_DATA11 = _MXC_BUILD_GPIO_PIN(1, 24, 0x2A8, 0x70C), - MX35_PIN_ATA_DATA12 = _MXC_BUILD_GPIO_PIN(1, 25, 0x2AC, 0x710), - MX35_PIN_ATA_DATA13 = _MXC_BUILD_GPIO_PIN(1, 26, 0x2B0, 0x714), - MX35_PIN_ATA_DATA14 = _MXC_BUILD_GPIO_PIN(1, 27, 0x2B4, 0x718), - MX35_PIN_ATA_DATA15 = _MXC_BUILD_GPIO_PIN(1, 28, 0x2B8, 0x71C), - MX35_PIN_ATA_INTRQ = _MXC_BUILD_GPIO_PIN(1, 29, 0x2BC, 0x720), - MX35_PIN_ATA_BUFF_EN = _MXC_BUILD_GPIO_PIN(1, 30, 0x2C0, 0x724), - MX35_PIN_ATA_DMARQ = _MXC_BUILD_GPIO_PIN(1, 31, 0x2C4, 0x728), - MX35_PIN_ATA_DA0 = _MXC_BUILD_GPIO_PIN(2, 0, 0x2C8, 0x72C), - MX35_PIN_ATA_DA1 = _MXC_BUILD_GPIO_PIN(2, 1, 0x2CC, 0x730), - MX35_PIN_ATA_DA2 = _MXC_BUILD_GPIO_PIN(2, 2, 0x2D0, 0x734), - - MX35_PIN_MLB_CLK = _MXC_BUILD_GPIO_PIN(2, 3, 0x2D4, 0x738), - MX35_PIN_MLB_DAT = _MXC_BUILD_GPIO_PIN(2, 4, 0x2D8, 0x73C), - MX35_PIN_MLB_SIG = _MXC_BUILD_GPIO_PIN(2, 5, 0x2DC, 0x740), - - MX35_PIN_FEC_TX_CLK = _MXC_BUILD_GPIO_PIN(2, 6, 0x2E0, 0x744), - MX35_PIN_FEC_RX_CLK = _MXC_BUILD_GPIO_PIN(2, 7, 0x2E4, 0x748), - MX35_PIN_FEC_RX_DV = _MXC_BUILD_GPIO_PIN(2, 8, 0x2E8, 0x74C), - MX35_PIN_FEC_COL = _MXC_BUILD_GPIO_PIN(2, 9, 0x2EC, 0x750), - MX35_PIN_FEC_RDATA0 = _MXC_BUILD_GPIO_PIN(2, 10, 0x2F0, 0x754), - MX35_PIN_FEC_TDATA0 = _MXC_BUILD_GPIO_PIN(2, 11, 0x2F4, 0x758), - MX35_PIN_FEC_TX_EN = _MXC_BUILD_GPIO_PIN(2, 12, 0x2F8, 0x75C), - MX35_PIN_FEC_MDC = _MXC_BUILD_GPIO_PIN(2, 13, 0x2FC, 0x760), - MX35_PIN_FEC_MDIO = _MXC_BUILD_GPIO_PIN(2, 14, 0x300, 0x764), - MX35_PIN_FEC_TX_ERR = _MXC_BUILD_GPIO_PIN(2, 15, 0x304, 0x768), - MX35_PIN_FEC_RX_ERR = _MXC_BUILD_GPIO_PIN(2, 16, 0x308, 0x76C), - MX35_PIN_FEC_CRS = _MXC_BUILD_GPIO_PIN(2, 17, 0x30C, 0x770), - MX35_PIN_FEC_RDATA1 = _MXC_BUILD_GPIO_PIN(2, 18, 0x310, 0x774), - MX35_PIN_FEC_TDATA1 = _MXC_BUILD_GPIO_PIN(2, 19, 0x314, 0x778), - MX35_PIN_FEC_RDATA2 = _MXC_BUILD_GPIO_PIN(2, 20, 0x318, 0x77C), - MX35_PIN_FEC_TDATA2 = _MXC_BUILD_GPIO_PIN(2, 21, 0x31C, 0x780), - MX35_PIN_FEC_RDATA3 = _MXC_BUILD_GPIO_PIN(2, 22, 0x320, 0x784), - MX35_PIN_FEC_TDATA3 = _MXC_BUILD_GPIO_PIN(2, 23, 0x324, 0x788), -} iomux_pin_name_t; - -#endif -#endif diff --git a/arch/arm/include/asm/arch-mx5/clock.h b/arch/arm/include/asm/arch-mx5/clock.h index 9cdfb48..6910192 100644 --- a/arch/arm/include/asm/arch-mx5/clock.h +++ b/arch/arm/include/asm/arch-mx5/clock.h @@ -68,5 +68,6 @@ void set_usboh3_clk(void); void enable_usboh3_clk(unsigned char enable); void mxc_set_sata_internal_clock(void); int enable_i2c_clk(unsigned char enable, unsigned i2c_num); +void enable_nfc_clk(unsigned char enable); #endif /* __ASM_ARCH_CLOCK_H */ diff --git a/arch/arm/include/asm/arch-mx5/imx-regs.h b/arch/arm/include/asm/arch-mx5/imx-regs.h index a71cc13..8984e42 100644 --- a/arch/arm/include/asm/arch-mx5/imx-regs.h +++ b/arch/arm/include/asm/arch-mx5/imx-regs.h @@ -267,6 +267,8 @@ /* M4IF */ #define M4IF_FBPM0 0x40 #define M4IF_FIDBP 0x48 +#define M4IF_GENP_WEIM_MM_MASK 0x00000001 +#define WEIM_GCR2_MUX16_BYP_GRANT_MASK 0x00001000 /* Assuming 24MHz input clock with doubler ON */ /* MFI PDF */ @@ -499,7 +501,7 @@ struct iim_regs { u32 sdat; u32 prev; u32 srev; - u32 preg_p; + u32 prg_p; u32 scs0; u32 scs1; u32 scs2; @@ -508,12 +510,22 @@ struct iim_regs { struct fuse_bank { u32 fuse_regs[0x20]; u32 fuse_rsvd[0xe0]; +#if defined(CONFIG_MX51) } bank[4]; +#elif defined(CONFIG_MX53) + } bank[5]; +#endif }; struct fuse_bank0_regs { - u32 fuse0_23[24]; + u32 fuse0_7[8]; + u32 uid[8]; + u32 fuse16_23[8]; +#if defined(CONFIG_MX51) + u32 imei[8]; +#elif defined(CONFIG_MX53) u32 gp[8]; +#endif }; struct fuse_bank1_regs { @@ -522,6 +534,14 @@ struct fuse_bank1_regs { u32 fuse15_31[0x11]; }; +#if defined(CONFIG_MX53) +struct fuse_bank4_regs { + u32 fuse0_4[5]; + u32 gp[3]; + u32 fuse8_31[0x18]; +}; +#endif + #endif /* __ASSEMBLER__*/ #endif /* __ASM_ARCH_MX5_IMX_REGS_H__ */ diff --git a/arch/arm/include/asm/arch-mx5/iomux-mx51.h b/arch/arm/include/asm/arch-mx5/iomux-mx51.h index 4f37295..70aaa37 100644 --- a/arch/arm/include/asm/arch-mx5/iomux-mx51.h +++ b/arch/arm/include/asm/arch-mx5/iomux-mx51.h @@ -21,29 +21,8 @@ #include <asm/imx-common/iomux-v3.h> -#define PAD_CTL_DVS (1 << 13) -#define PAD_CTL_INPUT_DDR (1 << 9) -#define PAD_CTL_HYS (1 << 8) - -#define PAD_CTL_PKE (1 << 7) -#define PAD_CTL_PUE (1 << 6 | PAD_CTL_PKE) -#define PAD_CTL_PUS_100K_DOWN (0 << 4 | PAD_CTL_PUE) -#define PAD_CTL_PUS_47K_UP (1 << 4 | PAD_CTL_PUE) -#define PAD_CTL_PUS_100K_UP (2 << 4 | PAD_CTL_PUE) -#define PAD_CTL_PUS_22K_UP (3 << 4 | PAD_CTL_PUE) - -#define PAD_CTL_ODE (1 << 3) - -#define PAD_CTL_DSE_LOW (0 << 1) -#define PAD_CTL_DSE_MED (1 << 1) -#define PAD_CTL_DSE_HIGH (2 << 1) -#define PAD_CTL_DSE_MAX (3 << 1) - -#define PAD_CTL_SRE_FAST (1 << 0) -#define PAD_CTL_SRE_SLOW (0 << 0) - /* Pad control groupings */ -#define MX51_UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_DSE_HIGH | \ +#define MX51_UART_PAD_CTRL (PAD_CTL_PUS_100K_DOWN | PAD_CTL_DSE_HIGH | \ PAD_CTL_HYS | PAD_CTL_SRE_FAST) #define MX51_I2C_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_ODE | \ PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP | \ @@ -51,17 +30,17 @@ #define MX51_ESDHC_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_ODE | \ PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP | \ PAD_CTL_HYS) -#define MX51_USBH1_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_SRE_FAST | \ - PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP | \ - PAD_CTL_HYS | PAD_CTL_PUE) +#define MX51_USBH_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_HYS) #define MX51_ECSPI_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_HYS | \ PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST) -#define MX51_SDHCI_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_DSE_HIGH | \ - PAD_CTL_PUS_47K_UP | PAD_CTL_PUE | \ +#define MX51_SDHCI_PAD_CTRL (PAD_CTL_DSE_HIGH | PAD_CTL_PUS_47K_UP | \ PAD_CTL_SRE_FAST | PAD_CTL_DVS) #define MX51_GPIO_PAD_CTRL (PAD_CTL_DSE_HIGH | PAD_CTL_PKE | PAD_CTL_SRE_FAST) -#define __NA_ 0x000 +#define MX51_PAD_CTRL_2 (PAD_CTL_PKE | PAD_CTL_HYS) +#define MX51_PAD_CTRL_4 (PAD_CTL_PKE | PAD_CTL_DVS | PAD_CTL_HYS) +#define MX51_PAD_CTRL_5 (PAD_CTL_DVS | PAD_CTL_DSE_HIGH) /* * The naming convention for the pad modes is MX51_PAD_<padname>__<padmode> @@ -69,26 +48,57 @@ * See also iomux-v3.h */ -/* PAD MUX ALT INPSE PATH PADCTRL */ +/* PAD MUX ALT INPSE PATH PADCTRL */ enum { - MX51_PAD_EIM_D16__USBH2_DATA0 = IOMUX_PAD(0x3f0, 0x05c, 2, __NA_, 0, NO_PAD_CTRL), - MX51_PAD_EIM_D17__USBH2_DATA1 = IOMUX_PAD(0x3f4, 0x060, 2, __NA_, 0, NO_PAD_CTRL), - MX51_PAD_EIM_D18__USBH2_DATA2 = IOMUX_PAD(0x3f8, 0x064, 2, __NA_, 0, NO_PAD_CTRL), - MX51_PAD_EIM_D19__USBH2_DATA3 = IOMUX_PAD(0x3fc, 0x068, 2, __NA_, 0, NO_PAD_CTRL), - MX51_PAD_EIM_D20__USBH2_DATA4 = IOMUX_PAD(0x400, 0x06c, 2, __NA_, 0, NO_PAD_CTRL), - MX51_PAD_EIM_D21__USBH2_DATA5 = IOMUX_PAD(0x404, 0x070, 2, __NA_, 0, NO_PAD_CTRL), - MX51_PAD_EIM_D22__USBH2_DATA6 = IOMUX_PAD(0x408, 0x074, 2, __NA_, 0, NO_PAD_CTRL), - MX51_PAD_EIM_D23__USBH2_DATA7 = IOMUX_PAD(0x40c, 0x078, 2, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_EIM_D16__USBH2_DATA0 = IOMUX_PAD(0x3f0, 0x05c, 2, __NA_, 0, MX51_USBH_PAD_CTRL), + MX51_PAD_EIM_D17__GPIO2_1 = IOMUX_PAD(0x3f4, 0x060, 1, __NA_, 0, MX51_GPIO_PAD_CTRL), + MX51_PAD_EIM_D17__USBH2_DATA1 = IOMUX_PAD(0x3f4, 0x060, 2, __NA_, 0, MX51_USBH_PAD_CTRL), + MX51_PAD_EIM_D18__USBH2_DATA2 = IOMUX_PAD(0x3f8, 0x064, 2, __NA_, 0, MX51_USBH_PAD_CTRL), + MX51_PAD_EIM_D19__USBH2_DATA3 = IOMUX_PAD(0x3fc, 0x068, 2, __NA_, 0, MX51_USBH_PAD_CTRL), + MX51_PAD_EIM_D20__USBH2_DATA4 = IOMUX_PAD(0x400, 0x06c, 2, __NA_, 0, MX51_USBH_PAD_CTRL), + MX51_PAD_EIM_D21__GPIO2_5 = IOMUX_PAD(0x404, 0x070, 1, __NA_, 0, MX51_GPIO_PAD_CTRL), + MX51_PAD_EIM_D21__USBH2_DATA5 = IOMUX_PAD(0x404, 0x070, 2, __NA_, 0, MX51_USBH_PAD_CTRL), + MX51_PAD_EIM_D22__USBH2_DATA6 = IOMUX_PAD(0x408, 0x074, 2, __NA_, 0, MX51_USBH_PAD_CTRL), + MX51_PAD_EIM_D23__USBH2_DATA7 = IOMUX_PAD(0x40c, 0x078, 2, __NA_, 0, MX51_USBH_PAD_CTRL), + MX51_PAD_EIM_D25__UART3_RXD = IOMUX_PAD(0x414, 0x080, 3, 0x9f4, 0, MX51_UART_PAD_CTRL), + MX51_PAD_EIM_D26__UART3_TXD = IOMUX_PAD(0x418, 0x084, 3, __NA_, 0, MX51_UART_PAD_CTRL), MX51_PAD_EIM_D27__GPIO2_9 = IOMUX_PAD(0x41c, 0x088, 1, __NA_, 0, MX51_GPIO_PAD_CTRL), - MX51_PAD_EIM_A24__USBH2_CLK = IOMUX_PAD(0x450, 0x0bc, 2, __NA_, 0, NO_PAD_CTRL), - MX51_PAD_EIM_A25__USBH2_DIR = IOMUX_PAD(0x454, 0x0c0, 2, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_EIM_A16__GPIO2_10 = IOMUX_PAD(0x430, 0x09c, 1, __NA_, 0, MX51_GPIO_PAD_CTRL), + MX51_PAD_EIM_A17__GPIO2_11 = IOMUX_PAD(0x434, 0x0a0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL), + MX51_PAD_EIM_A20__GPIO2_14 = IOMUX_PAD(0x440, 0x0ac, 1, __NA_, 0, MX51_GPIO_PAD_CTRL), + MX51_PAD_EIM_A22__GPIO2_16 = IOMUX_PAD(0x448, 0x0b4, 1, __NA_, 0, MX51_GPIO_PAD_CTRL), + MX51_PAD_EIM_A24__USBH2_CLK = IOMUX_PAD(0x450, 0x0bc, 2, __NA_, 0, MX51_USBH_PAD_CTRL), + MX51_PAD_EIM_A25__USBH2_DIR = IOMUX_PAD(0x454, 0x0c0, 2, __NA_, 0, MX51_USBH_PAD_CTRL), MX51_PAD_EIM_A26__GPIO2_20 = IOMUX_PAD(0x458, 0x0c4, 1, __NA_, 0, MX51_GPIO_PAD_CTRL), - MX51_PAD_EIM_A26__USBH2_STP = IOMUX_PAD(0x458, 0x0c4, 2, __NA_, 0, NO_PAD_CTRL), - MX51_PAD_EIM_A27__USBH2_NXT = IOMUX_PAD(0x45c, 0x0c8, 2, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_EIM_A26__USBH2_STP = IOMUX_PAD(0x458, 0x0c4, 2, __NA_, 0, MX51_USBH_PAD_CTRL), + MX51_PAD_EIM_A27__USBH2_NXT = IOMUX_PAD(0x45c, 0x0c8, 2, __NA_, 0, MX51_USBH_PAD_CTRL), + MX51_PAD_EIM_EB2__FEC_MDIO = IOMUX_PAD(0x468, 0x0d4, 3, 0x954, 0, PAD_CTL_PUS_22K_UP | PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_HYS), + MX51_PAD_EIM_EB3__FEC_RDATA1 = IOMUX_PAD(0x46c, 0x0d8, 3, 0x95c, 0, NO_PAD_CTRL), + MX51_PAD_EIM_EB3__GPIO2_23 = IOMUX_PAD(0x46c, 0x0d8, 1, __NA_, 0, MX51_GPIO_PAD_CTRL), MX51_PAD_EIM_CS0__GPIO2_25 = IOMUX_PAD(0x474, 0x0e0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL), - MX51_PAD_EIM_CS2__SD1_CD = IOMUX_PAD(0x47c, 0x0e8, 1, __NA_, 0, MX51_ESDHC_PAD_CTRL), + MX51_PAD_EIM_CS2__FEC_RDATA2 = IOMUX_PAD(0x47c, 0x0e8, 3, 0x960, 0, NO_PAD_CTRL), + MX51_PAD_EIM_CS2__GPIO2_27 = IOMUX_PAD(0x47c, 0x0e8, 1, __NA_, 0, MX51_GPIO_PAD_CTRL), + MX51_PAD_EIM_CS3__FEC_RDATA3 = IOMUX_PAD(0x480, 0x0ec, 3, 0x964, 0, NO_PAD_CTRL), MX51_PAD_EIM_CS3__GPIO2_28 = IOMUX_PAD(0x480, 0x0ec, 1, __NA_, 0, MX51_GPIO_PAD_CTRL), + MX51_PAD_EIM_CS4__FEC_RX_ER = IOMUX_PAD(0x484, 0x0f0, 3, 0x970, 0, MX51_PAD_CTRL_2), MX51_PAD_EIM_CS4__GPIO2_29 = IOMUX_PAD(0x484, 0x0f0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL), + MX51_PAD_EIM_CS5__FEC_CRS = IOMUX_PAD(0x488, 0x0f4, 3, 0x950, 0, MX51_PAD_CTRL_2), + MX51_PAD_DRAM_RAS__DRAM_RAS = IOMUX_PAD(0x4a4, __NA_, 0, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_DRAM_CAS__DRAM_CAS = IOMUX_PAD(0x4a8, __NA_, 0, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_DRAM_SDWE__DRAM_SDWE = IOMUX_PAD(0x4ac, __NA_, 0, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_DRAM_SDCKE0__DRAM_SDCKE0 = IOMUX_PAD(0x4b0, __NA_, 0, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_DRAM_SDCKE1__DRAM_SDCKE1 = IOMUX_PAD(0x4b4, __NA_, 0, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_DRAM_SDCLK__DRAM_SDCLK = IOMUX_PAD(0x4b8, __NA_, 0, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_DRAM_SDQS0__DRAM_SDQS0 = IOMUX_PAD(0x4bc, __NA_, 0, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_DRAM_SDQS1__DRAM_SDQS1 = IOMUX_PAD(0x4c0, __NA_, 0, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_DRAM_SDQS2__DRAM_SDQS2 = IOMUX_PAD(0x4c4, __NA_, 0, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_DRAM_SDQS3__DRAM_SDQS3 = IOMUX_PAD(0x4c8, __NA_, 0, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_DRAM_CS0__DRAM_CS0 = IOMUX_PAD(0x4cc, __NA_, 0, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_DRAM_CS1__DRAM_CS1 = IOMUX_PAD(0x4d0, 0x104, 0, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_DRAM_DQM0__DRAM_DQM0 = IOMUX_PAD(0x4d4, __NA_, 0, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_DRAM_DQM1__DRAM_DQM1 = IOMUX_PAD(0x4d8, __NA_, 0, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_DRAM_DQM2__DRAM_DQM2 = IOMUX_PAD(0x4dc, __NA_, 0, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_DRAM_DQM3__DRAM_DQM3 = IOMUX_PAD(0x4e0, __NA_, 0, __NA_, 0, NO_PAD_CTRL), MX51_PAD_NANDF_WE_B__PATA_DIOW = IOMUX_PAD(0x4e4, 0x108, 1, __NA_, 0, NO_PAD_CTRL), MX51_PAD_NANDF_RE_B__PATA_DIOR = IOMUX_PAD(0x4e8, 0x10c, 1, __NA_, 0, NO_PAD_CTRL), MX51_PAD_NANDF_ALE__PATA_BUFFER_EN = IOMUX_PAD(0x4ec, 0x110, 1, __NA_, 0, NO_PAD_CTRL), @@ -96,19 +106,38 @@ enum { MX51_PAD_NANDF_WP_B__PATA_DMACK = IOMUX_PAD(0x4f4, 0x118, 1, __NA_, 0, NO_PAD_CTRL), MX51_PAD_NANDF_RB0__PATA_DMARQ = IOMUX_PAD(0x4f8, 0x11c, 1, __NA_, 0, NO_PAD_CTRL), MX51_PAD_NANDF_RB1__PATA_IORDY = IOMUX_PAD(0x4fc, 0x120, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_RB2__FEC_COL = IOMUX_PAD(0x500, 0x124, 1, 0x94c, 0, MX51_PAD_CTRL_2), + MX51_PAD_NANDF_RB2__GPIO3_10 = IOMUX_PAD(0x500, 0x124, 3, __NA_, 0, MX51_GPIO_PAD_CTRL), + MX51_PAD_NANDF_RB3__FEC_RX_CLK = IOMUX_PAD(0x504, 0x128, 1, 0x968, 0, MX51_PAD_CTRL_2), + MX51_PAD_NANDF_RB3__GPIO3_11 = IOMUX_PAD(0x504, 0x128, 3, __NA_, 0, MX51_GPIO_PAD_CTRL), MX51_PAD_GPIO_NAND__PATA_INTRQ = IOMUX_PAD(0x514, 0x12c, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_CS2__FEC_TX_ER = IOMUX_PAD(0x520, 0x138, 2, __NA_, 0, MX51_PAD_CTRL_5), MX51_PAD_NANDF_CS2__PATA_CS_0 = IOMUX_PAD(0x520, 0x138, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_CS3__FEC_MDC = IOMUX_PAD(0x524, 0x13c, 2, __NA_, 0, MX51_PAD_CTRL_5), MX51_PAD_NANDF_CS3__PATA_CS_1 = IOMUX_PAD(0x524, 0x13c, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_CS4__FEC_TDATA1 = IOMUX_PAD(0x528, 0x140, 2, __NA_, 0, MX51_PAD_CTRL_5), MX51_PAD_NANDF_CS4__PATA_DA_0 = IOMUX_PAD(0x528, 0x140, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_CS5__FEC_TDATA2 = IOMUX_PAD(0x52c, 0x144, 2, __NA_, 0, MX51_PAD_CTRL_5), MX51_PAD_NANDF_CS5__PATA_DA_1 = IOMUX_PAD(0x52c, 0x144, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_CS6__FEC_TDATA3 = IOMUX_PAD(0x530, 0x148, 2, __NA_, 0, MX51_PAD_CTRL_5), MX51_PAD_NANDF_CS6__PATA_DA_2 = IOMUX_PAD(0x530, 0x148, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_CS7__FEC_TX_EN = IOMUX_PAD(0x534, 0x14c, 1, __NA_, 0, MX51_PAD_CTRL_5), + MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK = IOMUX_PAD(0x538, 0x150, 1, 0x974, 0, MX51_PAD_CTRL_4), + MX51_PAD_NANDF_D15__GPIO3_25 = IOMUX_PAD(0x53c, 0x154, 3, __NA_, 0, MX51_GPIO_PAD_CTRL), MX51_PAD_NANDF_D15__PATA_DATA15 = IOMUX_PAD(0x53c, 0x154, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D14__GPIO3_26 = IOMUX_PAD(0x540, 0x158, 3, __NA_, 0, MX51_GPIO_PAD_CTRL), MX51_PAD_NANDF_D14__PATA_DATA14 = IOMUX_PAD(0x540, 0x158, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D13__GPIO3_27 = IOMUX_PAD(0x544, 0x15c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL), MX51_PAD_NANDF_D13__PATA_DATA13 = IOMUX_PAD(0x544, 0x15c, 1, __NA_, 0, NO_PAD_CTRL), MX51_PAD_NANDF_D12__PATA_DATA12 = IOMUX_PAD(0x548, 0x160, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D11__FEC_RX_DV = IOMUX_PAD(0x54c, 0x164, 2, 0x96c, 0, NO_PAD_CTRL), MX51_PAD_NANDF_D11__PATA_DATA11 = IOMUX_PAD(0x54c, 0x164, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D10__GPIO3_30 = IOMUX_PAD(0x550, 0x168, 3, __NA_, 0, MX51_GPIO_PAD_CTRL), MX51_PAD_NANDF_D10__PATA_DATA10 = IOMUX_PAD(0x550, 0x168, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D9__FEC_RDATA0 = IOMUX_PAD(0x554, 0x16c, 0x12, 0x958, 0, MX51_PAD_CTRL_4), + MX51_PAD_NANDF_D9__GPIO3_31 = IOMUX_PAD(0x554, 0x16c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL), MX51_PAD_NANDF_D9__PATA_DATA9 = IOMUX_PAD(0x554, 0x16c, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_NANDF_D8__FEC_TDATA0 = IOMUX_PAD(0x558, 0x170, 2, __NA_, 0, MX51_PAD_CTRL_5), MX51_PAD_NANDF_D8__PATA_DATA8 = IOMUX_PAD(0x558, 0x170, 1, __NA_, 0, NO_PAD_CTRL), MX51_PAD_NANDF_D7__PATA_DATA7 = IOMUX_PAD(0x55c, 0x174, 1, __NA_, 0, NO_PAD_CTRL), MX51_PAD_NANDF_D6__PATA_DATA6 = IOMUX_PAD(0x560, 0x178, 1, __NA_, 0, NO_PAD_CTRL), @@ -118,34 +147,52 @@ enum { MX51_PAD_NANDF_D2__PATA_DATA2 = IOMUX_PAD(0x570, 0x188, 1, __NA_, 0, NO_PAD_CTRL), MX51_PAD_NANDF_D1__PATA_DATA1 = IOMUX_PAD(0x574, 0x18c, 1, __NA_, 0, NO_PAD_CTRL), MX51_PAD_NANDF_D0__PATA_DATA0 = IOMUX_PAD(0x578, 0x190, 1, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_CSI2_D12__GPIO4_9 = IOMUX_PAD(0x5bc, 0x1cc, 3, __NA_, 0, MX51_GPIO_PAD_CTRL), + MX51_PAD_CSI2_D13__GPIO4_10 = IOMUX_PAD(0x5c0, 0x1d0, 3, __NA_, 0, MX51_GPIO_PAD_CTRL), MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI = IOMUX_PAD(0x600, 0x210, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL), MX51_PAD_CSPI1_MISO__ECSPI1_MISO = IOMUX_PAD(0x604, 0x214, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL), + MX51_PAD_CSPI1_SS0__ECSPI1_SS0 = IOMUX_PAD(0x608, 0x218, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL), MX51_PAD_CSPI1_SS0__GPIO4_24 = IOMUX_PAD(0x608, 0x218, 3, __NA_, 0, MX51_GPIO_PAD_CTRL), + MX51_PAD_CSPI1_SS1__ECSPI1_SS1 = IOMUX_PAD(0x60c, 0x21c, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL), MX51_PAD_CSPI1_SS1__GPIO4_25 = IOMUX_PAD(0x60c, 0x21c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL), + MX51_PAD_CSPI1_RDY__ECSPI1_RDY = IOMUX_PAD(0x610, 0x220, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL), + MX51_PAD_CSPI1_RDY__GPIO4_26 = IOMUX_PAD(0x610, 0x220, 3, __NA_, 0, MX51_GPIO_PAD_CTRL), MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK = IOMUX_PAD(0x614, 0x224, 0, __NA_, 0, MX51_ECSPI_PAD_CTRL), MX51_PAD_UART1_RXD__UART1_RXD = IOMUX_PAD(0x618, 0x228, 0, 0x9e4, 0, MX51_UART_PAD_CTRL), MX51_PAD_UART1_TXD__UART1_TXD = IOMUX_PAD(0x61c, 0x22c, 0, __NA_, 0, MX51_UART_PAD_CTRL), MX51_PAD_UART1_RTS__UART1_RTS = IOMUX_PAD(0x620, 0x230, 0, 0x9e0, 0, MX51_UART_PAD_CTRL), MX51_PAD_UART1_CTS__UART1_CTS = IOMUX_PAD(0x624, 0x234, 0, __NA_, 0, MX51_UART_PAD_CTRL), - MX51_PAD_USBH1_CLK__USBH1_CLK = IOMUX_PAD(0x678, 0x278, 0, __NA_, 0, MX51_USBH1_PAD_CTRL), - MX51_PAD_USBH1_DIR__USBH1_DIR = IOMUX_PAD(0x67c, 0x27c, 0, __NA_, 0, MX51_USBH1_PAD_CTRL), - MX51_PAD_USBH1_STP__USBH1_STP = IOMUX_PAD(0x680, 0x280, 0, __NA_, 0, MX51_USBH1_PAD_CTRL), + MX51_PAD_USBH1_CLK__USBH1_CLK = IOMUX_PAD(0x678, 0x278, 0, __NA_, 0, MX51_USBH_PAD_CTRL), + MX51_PAD_USBH1_DIR__USBH1_DIR = IOMUX_PAD(0x67c, 0x27c, 0, __NA_, 0, MX51_USBH_PAD_CTRL), MX51_PAD_USBH1_STP__GPIO1_27 = IOMUX_PAD(0x680, 0x280, 2, __NA_, 0, MX51_GPIO_PAD_CTRL), - MX51_PAD_USBH1_NXT__USBH1_NXT = IOMUX_PAD(0x684, 0x284, 0, __NA_, 0, MX51_USBH1_PAD_CTRL), - MX51_PAD_USBH1_DATA0__USBH1_DATA0 = IOMUX_PAD(0x688, 0x288, 0, __NA_, 0, MX51_USBH1_PAD_CTRL), - MX51_PAD_USBH1_DATA1__USBH1_DATA1 = IOMUX_PAD(0x68c, 0x28c, 0, __NA_, 0, MX51_USBH1_PAD_CTRL), - MX51_PAD_USBH1_DATA2__USBH1_DATA2 = IOMUX_PAD(0x690, 0x290, 0, __NA_, 0, MX51_USBH1_PAD_CTRL), - MX51_PAD_USBH1_DATA3__USBH1_DATA3 = IOMUX_PAD(0x694, 0x294, 0, __NA_, 0, MX51_USBH1_PAD_CTRL), - MX51_PAD_USBH1_DATA4__USBH1_DATA4 = IOMUX_PAD(0x698, 0x298, 0, __NA_, 0, MX51_USBH1_PAD_CTRL), - MX51_PAD_USBH1_DATA5__USBH1_DATA5 = IOMUX_PAD(0x69c, 0x29c, 0, __NA_, 0, MX51_USBH1_PAD_CTRL), - MX51_PAD_USBH1_DATA6__USBH1_DATA6 = IOMUX_PAD(0x6a0, 0x2a0, 0, __NA_, 0, MX51_USBH1_PAD_CTRL), - MX51_PAD_USBH1_DATA7__USBH1_DATA7 = IOMUX_PAD(0x6a4, 0x2a4, 0, __NA_, 0, MX51_USBH1_PAD_CTRL), + MX51_PAD_USBH1_STP__USBH1_STP = IOMUX_PAD(0x680, 0x280, 0, __NA_, 0, MX51_USBH_PAD_CTRL), + MX51_PAD_USBH1_NXT__USBH1_NXT = IOMUX_PAD(0x684, 0x284, 0, __NA_, 0, MX51_USBH_PAD_CTRL), + MX51_PAD_USBH1_DATA0__USBH1_DATA0 = IOMUX_PAD(0x688, 0x288, 0, __NA_, 0, MX51_USBH_PAD_CTRL), + MX51_PAD_USBH1_DATA1__USBH1_DATA1 = IOMUX_PAD(0x68c, 0x28c, 0, __NA_, 0, MX51_USBH_PAD_CTRL), + MX51_PAD_USBH1_DATA2__USBH1_DATA2 = IOMUX_PAD(0x690, 0x290, 0, __NA_, 0, MX51_USBH_PAD_CTRL), + MX51_PAD_USBH1_DATA3__USBH1_DATA3 = IOMUX_PAD(0x694, 0x294, 0, __NA_, 0, MX51_USBH_PAD_CTRL), + MX51_PAD_USBH1_DATA4__USBH1_DATA4 = IOMUX_PAD(0x698, 0x298, 0, __NA_, 0, MX51_USBH_PAD_CTRL), + MX51_PAD_USBH1_DATA5__USBH1_DATA5 = IOMUX_PAD(0x69c, 0x29c, 0, __NA_, 0, MX51_USBH_PAD_CTRL), + MX51_PAD_USBH1_DATA6__USBH1_DATA6 = IOMUX_PAD(0x6a0, 0x2a0, 0, __NA_, 0, MX51_USBH_PAD_CTRL), + MX51_PAD_USBH1_DATA7__USBH1_DATA7 = IOMUX_PAD(0x6a4, 0x2a4, 0, __NA_, 0, MX51_USBH_PAD_CTRL), + MX51_PAD_DI1_PIN11__ECSPI1_SS2 = IOMUX_PAD(0x6a8, 0x2a8, 7, __NA_, 0, MX51_ECSPI_PAD_CTRL), + MX51_PAD_DI1_PIN12__GPIO3_1 = IOMUX_PAD(0x6ac, 0x2ac, 4, 0x978, 1, MX51_GPIO_PAD_CTRL), + MX51_PAD_DI1_PIN13__GPIO3_2 = IOMUX_PAD(0x6b0, 0x2b0, 4, 0x97c, 1, MX51_GPIO_PAD_CTRL), + MX51_PAD_DI1_D0_CS__GPIO3_3 = IOMUX_PAD(0x6b4, 0x2b4, 4, 0x980, 1, MX51_GPIO_PAD_CTRL), + MX51_PAD_DI1_D1_CS__GPIO3_4 = IOMUX_PAD(0x6b8, 0x2b8, 4, 0x984, 1, MX51_GPIO_PAD_CTRL), + MX51_PAD_DISPB2_SER_DIN__GPIO3_5 = IOMUX_PAD(0x6bc, 0x2bc, 4, 0x988, 1, MX51_GPIO_PAD_CTRL), + MX51_PAD_DISPB2_SER_DIO__GPIO3_6 = IOMUX_PAD(0x6c0, 0x2c0, 4, 0x98c, 1, MX51_GPIO_PAD_CTRL), + MX51_PAD_DI1_PIN3__DI1_PIN3 = IOMUX_PAD(0x72c, 0x32c, 0, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_DI1_PIN2__DI1_PIN2 = IOMUX_PAD(0x734, 0x330, 0, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK = IOMUX_PAD(0x754, 0x34c, 0, __NA_, 0, NO_PAD_CTRL), + MX51_PAD_DI_GP4__DI2_PIN15 = IOMUX_PAD(0x758, 0x350, 4, __NA_, 0, NO_PAD_CTRL), MX51_PAD_SD1_CMD__SD1_CMD = IOMUX_PAD(0x79c, 0x394, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL), MX51_PAD_SD1_CLK__SD1_CLK = IOMUX_PAD(0x7a0, 0x398, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS), MX51_PAD_SD1_DATA0__SD1_DATA0 = IOMUX_PAD(0x7a4, 0x39c, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL), MX51_PAD_SD1_DATA1__SD1_DATA1 = IOMUX_PAD(0x7a8, 0x3a0, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL), MX51_PAD_SD1_DATA2__SD1_DATA2 = IOMUX_PAD(0x7ac, 0x3a4, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL), MX51_PAD_SD1_DATA3__SD1_DATA3 = IOMUX_PAD(0x7b0, 0x3a8, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL), + MX51_PAD_GPIO1_0__GPIO1_0 = IOMUX_PAD(0x7b4, 0x3ac, 1, __NA_, 0, MX51_GPIO_PAD_CTRL), MX51_PAD_GPIO1_0__SD1_CD = IOMUX_PAD(0x7b4, 0x3ac, 0, __NA_, 0, MX51_ESDHC_PAD_CTRL), MX51_PAD_GPIO1_1__SD1_WP = IOMUX_PAD(0x7b8, 0x3b0, 0, __NA_, 0, MX51_ESDHC_PAD_CTRL), MX51_PAD_SD2_CMD__SD2_CMD = IOMUX_PAD(0x7bc, 0x3b4, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL), @@ -154,11 +201,36 @@ enum { MX51_PAD_SD2_DATA1__SD2_DATA1 = IOMUX_PAD(0x7c8, 0x3c0, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL), MX51_PAD_SD2_DATA2__SD2_DATA2 = IOMUX_PAD(0x7cc, 0x3c4, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL), MX51_PAD_SD2_DATA3__SD2_DATA3 = IOMUX_PAD(0x7d0, 0x3c8, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL), + MX51_PAD_GPIO1_2__GPIO1_2 = IOMUX_PAD(0x7d4, 0x3cc, 0, __NA_, 0, MX51_GPIO_PAD_CTRL), + MX51_PAD_GPIO1_2__PWM1_PWMO = IOMUX_PAD(0x7d4, 0x3cc, 1, __NA_, 0, NO_PAD_CTRL), MX51_PAD_GPIO1_3__GPIO1_3 = IOMUX_PAD(0x7d8, 0x3d0, 0, __NA_, 0, MX51_GPIO_PAD_CTRL), MX51_PAD_GPIO1_5__GPIO1_5 = IOMUX_PAD(0x808, 0x3dc, 0, __NA_, 0, MX51_GPIO_PAD_CTRL), MX51_PAD_GPIO1_6__GPIO1_6 = IOMUX_PAD(0x80c, 0x3e0, 0, __NA_, 0, MX51_GPIO_PAD_CTRL), + MX51_PAD_GPIO1_7__GPIO1_7 = IOMUX_PAD(0x810, 0x3e4, 0, __NA_, 0, MX51_GPIO_PAD_CTRL), MX51_PAD_GPIO1_7__SD2_WP = IOMUX_PAD(0x810, 0x3e4, 6, __NA_, 0, MX51_ESDHC_PAD_CTRL), MX51_PAD_GPIO1_8__SD2_CD = IOMUX_PAD(0x814, 0x3e8, 6, __NA_, 0, MX51_ESDHC_PAD_CTRL), + MX51_GRP_DDRPKS = IOMUX_PAD(0x820, __NA_, 0, __NA_, 0, NO_PAD_CTRL), + MX51_GRP_DRAM_B4 = IOMUX_PAD(0x82c, __NA_, 0, __NA_, 0, NO_PAD_CTRL), + MX51_GRP_PKEDDR = IOMUX_PAD(0x838, __NA_, 0, __NA_, 0, NO_PAD_CTRL), + MX51_GRP_DDR_A0 = IOMUX_PAD(0x83c, __NA_, 0, __NA_, 0, NO_PAD_CTRL), + MX51_GRP_DDR_A1 = IOMUX_PAD(0x848, __NA_, 0, __NA_, 0, NO_PAD_CTRL), + MX51_GRP_DDRAPUS = IOMUX_PAD(0x84c, __NA_, 0, __NA_, 0, NO_PAD_CTRL), + MX51_GRP_HYSDDR0 = IOMUX_PAD(0x85c, __NA_, 0, __NA_, 0, NO_PAD_CTRL), + MX51_GRP_HYSDDR1 = IOMUX_PAD(0x864, __NA_, 0, __NA_, 0, NO_PAD_CTRL), + MX51_GRP_HYSDDR2 = IOMUX_PAD(0x86c, __NA_, 0, __NA_, 0, NO_PAD_CTRL), + MX51_GRP_HYSDDR3 = IOMUX_PAD(0x874, __NA_, 0, __NA_, 0, NO_PAD_CTRL), + MX51_GRP_DRAM_SR_B0 = IOMUX_PAD(0x878, __NA_, 0, __NA_, 0, NO_PAD_CTRL), + MX51_GRP_DDRAPKS = IOMUX_PAD(0x87c, __NA_, 0, __NA_, 0, NO_PAD_CTRL), + MX51_GRP_DRAM_SR_B1 = IOMUX_PAD(0x880, __NA_, 0, __NA_, 0, NO_PAD_CTRL), + MX51_GRP_DDRPUS = IOMUX_PAD(0x884, __NA_, 0, __NA_, 0, NO_PAD_CTRL), + MX51_GRP_DRAM_SR_B2 = IOMUX_PAD(0x88c, __NA_, 0, __NA_, 0, NO_PAD_CTRL), + MX51_GRP_PKEADDR = IOMUX_PAD(0x890, __NA_, 0, __NA_, 0, NO_PAD_CTRL), + MX51_GRP_DRAM_SR_B4 = IOMUX_PAD(0x89c, __NA_, 0, __NA_, 0, NO_PAD_CTRL), + MX51_GRP_INMODE1 = IOMUX_PAD(0x8a0, __NA_, 0, __NA_, 0, NO_PAD_CTRL), + MX51_GRP_DRAM_B0 = IOMUX_PAD(0x8a4, __NA_, 0, __NA_, 0, NO_PAD_CTRL), + MX51_GRP_DRAM_B1 = IOMUX_PAD(0x8ac, __NA_, 0, __NA_, 0, NO_PAD_CTRL), + MX51_GRP_DRAM_B2 = IOMUX_PAD(0x8b8, __NA_, 0, __NA_, 0, NO_PAD_CTRL), + MX51_GRP_DDR_SR_A1 = IOMUX_PAD(0x8bc, __NA_, 0, __NA_, 0, NO_PAD_CTRL), }; #endif /* __IOMUX_MX51_H__ */ diff --git a/arch/arm/include/asm/arch-mx5/iomux-mx53.h b/arch/arm/include/asm/arch-mx5/iomux-mx53.h new file mode 100644 index 0000000..f55c0f5 --- /dev/null +++ b/arch/arm/include/asm/arch-mx5/iomux-mx53.h @@ -0,0 +1,1232 @@ +/* + * (C) Copyright 2013 ADVANSEE + * Benoît Thébaudeau <benoit.thebaudeau@advansee.com> + * + * Based on Freescale's Linux i.MX iomux-mx53.h file: + * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __IOMUX_MX53_H__ +#define __IOMUX_MX53_H__ + +#include <asm/imx-common/iomux-v3.h> + +/* Pad control groupings */ +#define MX53_UART_PAD_CTRL (PAD_CTL_PUS_100K_DOWN | PAD_CTL_DSE_HIGH | \ + PAD_CTL_SRE_FAST | PAD_CTL_HYS) +#define MX53_SDHC_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | \ + PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST) + +/* + * The naming convention for the pad modes is MX53_PAD_<padname>__<padmode> + * If <padname> refers to a GPIO, it is named GPIO_<unit> + * If <padmode> refers to a GPIO, it is named GPIO<unit>_<num> + * See also iomux-v3.h + */ + +/* PAD MUX ALT INPSE PATH PADCTRL */ +enum { + MX53_PAD_GPIO_19__KPP_COL_5 = IOMUX_PAD(0x348, 0x020, 0, 0x840, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_19__GPIO4_5 = IOMUX_PAD(0x348, 0x020, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_19__CCM_CLKO = IOMUX_PAD(0x348, 0x020, 2, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_19__SPDIF_OUT1 = IOMUX_PAD(0x348, 0x020, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_19__RTC_CE_RTC_EXT_TRIG2 = IOMUX_PAD(0x348, 0x020, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_19__ECSPI1_RDY = IOMUX_PAD(0x348, 0x020, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_19__FEC_TDATA_3 = IOMUX_PAD(0x348, 0x020, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_19__SRC_INT_BOOT = IOMUX_PAD(0x348, 0x020, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_KEY_COL0__KPP_COL_0 = IOMUX_PAD(0x34C, 0x024, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_KEY_COL0__GPIO4_6 = IOMUX_PAD(0x34C, 0x024, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC = IOMUX_PAD(0x34C, 0x024, 2, 0x758, 0, NO_PAD_CTRL), + MX53_PAD_KEY_COL0__UART4_TXD_MUX = IOMUX_PAD(0x34C, 0x024, 4, __NA_, 0, MX53_UART_PAD_CTRL), + MX53_PAD_KEY_COL0__ECSPI1_SCLK = IOMUX_PAD(0x34C, 0x024, 5, 0x79C, 0, NO_PAD_CTRL), + MX53_PAD_KEY_COL0__FEC_RDATA_3 = IOMUX_PAD(0x34C, 0x024, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_KEY_COL0__SRC_ANY_PU_RST = IOMUX_PAD(0x34C, 0x024, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_KEY_ROW0__KPP_ROW_0 = IOMUX_PAD(0x350, 0x028, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_KEY_ROW0__GPIO4_7 = IOMUX_PAD(0x350, 0x028, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD = IOMUX_PAD(0x350, 0x028, 2, 0x74C, 0, NO_PAD_CTRL), + MX53_PAD_KEY_ROW0__UART4_RXD_MUX = IOMUX_PAD(0x350, 0x028, 4, 0x890, 1, MX53_UART_PAD_CTRL), + MX53_PAD_KEY_ROW0__ECSPI1_MOSI = IOMUX_PAD(0x350, 0x028, 5, 0x7A4, 0, NO_PAD_CTRL), + MX53_PAD_KEY_ROW0__FEC_TX_ER = IOMUX_PAD(0x350, 0x028, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_KEY_COL1__KPP_COL_1 = IOMUX_PAD(0x354, 0x02C, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_KEY_COL1__GPIO4_8 = IOMUX_PAD(0x354, 0x02C, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS = IOMUX_PAD(0x354, 0x02C, 2, 0x75C, 0, NO_PAD_CTRL), + MX53_PAD_KEY_COL1__UART5_TXD_MUX = IOMUX_PAD(0x354, 0x02C, 4, __NA_, 0, MX53_UART_PAD_CTRL), + MX53_PAD_KEY_COL1__ECSPI1_MISO = IOMUX_PAD(0x354, 0x02C, 5, 0x7A0, 0, NO_PAD_CTRL), + MX53_PAD_KEY_COL1__FEC_RX_CLK = IOMUX_PAD(0x354, 0x02C, 6, 0x808, 0, NO_PAD_CTRL), + MX53_PAD_KEY_COL1__USBPHY1_TXREADY = IOMUX_PAD(0x354, 0x02C, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_KEY_ROW1__KPP_ROW_1 = IOMUX_PAD(0x358, 0x030, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_KEY_ROW1__GPIO4_9 = IOMUX_PAD(0x358, 0x030, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD = IOMUX_PAD(0x358, 0x030, 2, 0x748, 0, NO_PAD_CTRL), + MX53_PAD_KEY_ROW1__UART5_RXD_MUX = IOMUX_PAD(0x358, 0x030, 4, 0x898, 1, MX53_UART_PAD_CTRL), + MX53_PAD_KEY_ROW1__ECSPI1_SS0 = IOMUX_PAD(0x358, 0x030, 5, 0x7A8, 0, NO_PAD_CTRL), + MX53_PAD_KEY_ROW1__FEC_COL = IOMUX_PAD(0x358, 0x030, 6, 0x800, 0, NO_PAD_CTRL), + MX53_PAD_KEY_ROW1__USBPHY1_RXVALID = IOMUX_PAD(0x358, 0x030, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_KEY_COL2__KPP_COL_2 = IOMUX_PAD(0x35C, 0x034, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_KEY_COL2__GPIO4_10 = IOMUX_PAD(0x35C, 0x034, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_KEY_COL2__CAN1_TXCAN = IOMUX_PAD(0x35C, 0x034, 2, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_KEY_COL2__FEC_MDIO = IOMUX_PAD(0x35C, 0x034, 4, 0x804, 0, NO_PAD_CTRL), + MX53_PAD_KEY_COL2__ECSPI1_SS1 = IOMUX_PAD(0x35C, 0x034, 5, 0x7AC, 0, NO_PAD_CTRL), + MX53_PAD_KEY_COL2__FEC_RDATA_2 = IOMUX_PAD(0x35C, 0x034, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_KEY_COL2__USBPHY1_RXACTIVE = IOMUX_PAD(0x35C, 0x034, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_KEY_ROW2__KPP_ROW_2 = IOMUX_PAD(0x360, 0x038, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_KEY_ROW2__GPIO4_11 = IOMUX_PAD(0x360, 0x038, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_KEY_ROW2__CAN1_RXCAN = IOMUX_PAD(0x360, 0x038, 2, 0x760, 0, NO_PAD_CTRL), + MX53_PAD_KEY_ROW2__FEC_MDC = IOMUX_PAD(0x360, 0x038, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_KEY_ROW2__ECSPI1_SS2 = IOMUX_PAD(0x360, 0x038, 5, 0x7B0, 0, NO_PAD_CTRL), + MX53_PAD_KEY_ROW2__FEC_TDATA_2 = IOMUX_PAD(0x360, 0x038, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_KEY_ROW2__USBPHY1_RXERROR = IOMUX_PAD(0x360, 0x038, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_KEY_COL3__KPP_COL_3 = IOMUX_PAD(0x364, 0x03C, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_KEY_COL3__GPIO4_12 = IOMUX_PAD(0x364, 0x03C, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_KEY_COL3__USBOH3_H2_DP = IOMUX_PAD(0x364, 0x03C, 2, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_KEY_COL3__SPDIF_IN1 = IOMUX_PAD(0x364, 0x03C, 3, 0x870, 0, NO_PAD_CTRL), + MX53_PAD_KEY_COL3__I2C2_SCL = IOMUX_PAD(0x364, 0x03C, 4 | IOMUX_CONFIG_SION, 0x81C, 0, NO_PAD_CTRL), + MX53_PAD_KEY_COL3__ECSPI1_SS3 = IOMUX_PAD(0x364, 0x03C, 5, 0x7B4, 0, NO_PAD_CTRL), + MX53_PAD_KEY_COL3__FEC_CRS = IOMUX_PAD(0x364, 0x03C, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK = IOMUX_PAD(0x364, 0x03C, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_KEY_ROW3__KPP_ROW_3 = IOMUX_PAD(0x368, 0x040, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_KEY_ROW3__GPIO4_13 = IOMUX_PAD(0x368, 0x040, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_KEY_ROW3__USBOH3_H2_DM = IOMUX_PAD(0x368, 0x040, 2, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK = IOMUX_PAD(0x368, 0x040, 3, 0x768, 0, NO_PAD_CTRL), + MX53_PAD_KEY_ROW3__I2C2_SDA = IOMUX_PAD(0x368, 0x040, 4 | IOMUX_CONFIG_SION, 0x820, 0, NO_PAD_CTRL), + MX53_PAD_KEY_ROW3__OSC32K_32K_OUT = IOMUX_PAD(0x368, 0x040, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_KEY_ROW3__CCM_PLL4_BYP = IOMUX_PAD(0x368, 0x040, 6, 0x77C, 0, NO_PAD_CTRL), + MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0 = IOMUX_PAD(0x368, 0x040, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_KEY_COL4__KPP_COL_4 = IOMUX_PAD(0x36C, 0x044, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_KEY_COL4__GPIO4_14 = IOMUX_PAD(0x36C, 0x044, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_KEY_COL4__CAN2_TXCAN = IOMUX_PAD(0x36C, 0x044, 2, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_KEY_COL4__IPU_SISG_4 = IOMUX_PAD(0x36C, 0x044, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_KEY_COL4__UART5_RTS = IOMUX_PAD(0x36C, 0x044, 4, 0x894, 0, MX53_UART_PAD_CTRL), + MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC = IOMUX_PAD(0x36C, 0x044, 5, 0x89C, 0, NO_PAD_CTRL), + MX53_PAD_KEY_COL4__USBPHY1_LINESTATE_1 = IOMUX_PAD(0x36C, 0x044, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_KEY_ROW4__KPP_ROW_4 = IOMUX_PAD(0x370, 0x048, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_KEY_ROW4__GPIO4_15 = IOMUX_PAD(0x370, 0x048, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_KEY_ROW4__CAN2_RXCAN = IOMUX_PAD(0x370, 0x048, 2, 0x764, 0, NO_PAD_CTRL), + MX53_PAD_KEY_ROW4__IPU_SISG_5 = IOMUX_PAD(0x370, 0x048, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_KEY_ROW4__UART5_CTS = IOMUX_PAD(0x370, 0x048, 4, __NA_, 0, MX53_UART_PAD_CTRL), + MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR = IOMUX_PAD(0x370, 0x048, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_KEY_ROW4__USBPHY1_VBUSVALID = IOMUX_PAD(0x370, 0x048, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK = IOMUX_PAD(0x378, 0x04C, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DI0_DISP_CLK__GPIO4_16 = IOMUX_PAD(0x378, 0x04C, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR = IOMUX_PAD(0x378, 0x04C, 2, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DI0_DISP_CLK__SDMA_DEBUG_CORE_STATE_0 = IOMUX_PAD(0x378, 0x04C, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DI0_DISP_CLK__EMI_EMI_DEBUG_0 = IOMUX_PAD(0x378, 0x04C, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DI0_DISP_CLK__USBPHY1_AVALID = IOMUX_PAD(0x378, 0x04C, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DI0_PIN15__IPU_DI0_PIN15 = IOMUX_PAD(0x37C, 0x050, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DI0_PIN15__GPIO4_17 = IOMUX_PAD(0x37C, 0x050, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC = IOMUX_PAD(0x37C, 0x050, 2, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DI0_PIN15__SDMA_DEBUG_CORE_STATE_1 = IOMUX_PAD(0x37C, 0x050, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DI0_PIN15__EMI_EMI_DEBUG_1 = IOMUX_PAD(0x37C, 0x050, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DI0_PIN15__USBPHY1_BVALID = IOMUX_PAD(0x37C, 0x050, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DI0_PIN2__IPU_DI0_PIN2 = IOMUX_PAD(0x380, 0x054, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DI0_PIN2__GPIO4_18 = IOMUX_PAD(0x380, 0x054, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD = IOMUX_PAD(0x380, 0x054, 2, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DI0_PIN2__SDMA_DEBUG_CORE_STATE_2 = IOMUX_PAD(0x380, 0x054, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DI0_PIN2__EMI_EMI_DEBUG_2 = IOMUX_PAD(0x380, 0x054, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DI0_PIN2__USBPHY1_ENDSESSION = IOMUX_PAD(0x380, 0x054, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DI0_PIN3__IPU_DI0_PIN3 = IOMUX_PAD(0x384, 0x058, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DI0_PIN3__GPIO4_19 = IOMUX_PAD(0x384, 0x058, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS = IOMUX_PAD(0x384, 0x058, 2, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DI0_PIN3__SDMA_DEBUG_CORE_STATE_3 = IOMUX_PAD(0x384, 0x058, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DI0_PIN3__EMI_EMI_DEBUG_3 = IOMUX_PAD(0x384, 0x058, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DI0_PIN3__USBPHY1_IDDIG = IOMUX_PAD(0x384, 0x058, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DI0_PIN4__IPU_DI0_PIN4 = IOMUX_PAD(0x388, 0x05C, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DI0_PIN4__GPIO4_20 = IOMUX_PAD(0x388, 0x05C, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD = IOMUX_PAD(0x388, 0x05C, 2, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DI0_PIN4__ESDHC1_WP = IOMUX_PAD(0x388, 0x05C, 3, 0x7FC, 0, NO_PAD_CTRL), + MX53_PAD_DI0_PIN4__SDMA_DEBUG_YIELD = IOMUX_PAD(0x388, 0x05C, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DI0_PIN4__EMI_EMI_DEBUG_4 = IOMUX_PAD(0x388, 0x05C, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DI0_PIN4__USBPHY1_HOSTDISCONNECT = IOMUX_PAD(0x388, 0x05C, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0 = IOMUX_PAD(0x38C, 0x060, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT0__GPIO4_21 = IOMUX_PAD(0x38C, 0x060, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT0__CSPI_SCLK = IOMUX_PAD(0x38C, 0x060, 2, 0x780, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0 = IOMUX_PAD(0x38C, 0x060, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT0__SDMA_DEBUG_CORE_RUN = IOMUX_PAD(0x38C, 0x060, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT0__EMI_EMI_DEBUG_5 = IOMUX_PAD(0x38C, 0x060, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT0__USBPHY2_TXREADY = IOMUX_PAD(0x38C, 0x060, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1 = IOMUX_PAD(0x390, 0x064, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT1__GPIO4_22 = IOMUX_PAD(0x390, 0x064, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT1__CSPI_MOSI = IOMUX_PAD(0x390, 0x064, 2, 0x788, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1 = IOMUX_PAD(0x390, 0x064, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT1__SDMA_DEBUG_EVENT_CHANNEL_SEL + = IOMUX_PAD(0x390, 0x064, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT1__EMI_EMI_DEBUG_6 = IOMUX_PAD(0x390, 0x064, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT1__USBPHY2_RXVALID = IOMUX_PAD(0x390, 0x064, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2 = IOMUX_PAD(0x394, 0x068, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT2__GPIO4_23 = IOMUX_PAD(0x394, 0x068, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT2__CSPI_MISO = IOMUX_PAD(0x394, 0x068, 2, 0x784, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2 = IOMUX_PAD(0x394, 0x068, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT2__SDMA_DEBUG_MODE = IOMUX_PAD(0x394, 0x068, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT2__EMI_EMI_DEBUG_7 = IOMUX_PAD(0x394, 0x068, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT2__USBPHY2_RXACTIVE = IOMUX_PAD(0x394, 0x068, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3 = IOMUX_PAD(0x398, 0x06C, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT3__GPIO4_24 = IOMUX_PAD(0x398, 0x06C, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT3__CSPI_SS0 = IOMUX_PAD(0x398, 0x06C, 2, 0x78C, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3 = IOMUX_PAD(0x398, 0x06C, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT3__SDMA_DEBUG_BUS_ERROR = IOMUX_PAD(0x398, 0x06C, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT3__EMI_EMI_DEBUG_8 = IOMUX_PAD(0x398, 0x06C, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT3__USBPHY2_RXERROR = IOMUX_PAD(0x398, 0x06C, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4 = IOMUX_PAD(0x39C, 0x070, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT4__GPIO4_25 = IOMUX_PAD(0x39C, 0x070, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT4__CSPI_SS1 = IOMUX_PAD(0x39C, 0x070, 2, 0x790, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4 = IOMUX_PAD(0x39C, 0x070, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB = IOMUX_PAD(0x39C, 0x070, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT4__EMI_EMI_DEBUG_9 = IOMUX_PAD(0x39C, 0x070, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT4__USBPHY2_SIECLOCK = IOMUX_PAD(0x39C, 0x070, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5 = IOMUX_PAD(0x3A0, 0x074, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT5__GPIO4_26 = IOMUX_PAD(0x3A0, 0x074, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT5__CSPI_SS2 = IOMUX_PAD(0x3A0, 0x074, 2, 0x794, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5 = IOMUX_PAD(0x3A0, 0x074, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT5__SDMA_DEBUG_MATCHED_DMBUS = IOMUX_PAD(0x3A0, 0x074, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT5__EMI_EMI_DEBUG_10 = IOMUX_PAD(0x3A0, 0x074, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT5__USBPHY2_LINESTATE_0 = IOMUX_PAD(0x3A0, 0x074, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6 = IOMUX_PAD(0x3A4, 0x078, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT6__GPIO4_27 = IOMUX_PAD(0x3A4, 0x078, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT6__CSPI_SS3 = IOMUX_PAD(0x3A4, 0x078, 2, 0x798, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6 = IOMUX_PAD(0x3A4, 0x078, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT6__SDMA_DEBUG_RTBUFFER_WRITE = IOMUX_PAD(0x3A4, 0x078, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT6__EMI_EMI_DEBUG_11 = IOMUX_PAD(0x3A4, 0x078, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT6__USBPHY2_LINESTATE_1 = IOMUX_PAD(0x3A4, 0x078, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7 = IOMUX_PAD(0x3A8, 0x07C, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT7__GPIO4_28 = IOMUX_PAD(0x3A8, 0x07C, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT7__CSPI_RDY = IOMUX_PAD(0x3A8, 0x07C, 2, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7 = IOMUX_PAD(0x3A8, 0x07C, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT7__SDMA_DEBUG_EVENT_CHANNEL_0 = IOMUX_PAD(0x3A8, 0x07C, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT7__EMI_EMI_DEBUG_12 = IOMUX_PAD(0x3A8, 0x07C, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT7__USBPHY2_VBUSVALID = IOMUX_PAD(0x3A8, 0x07C, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8 = IOMUX_PAD(0x3AC, 0x080, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT8__GPIO4_29 = IOMUX_PAD(0x3AC, 0x080, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT8__PWM1_PWMO = IOMUX_PAD(0x3AC, 0x080, 2, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT8__WDOG1_WDOG_B = IOMUX_PAD(0x3AC, 0x080, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT8__SDMA_DEBUG_EVENT_CHANNEL_1 = IOMUX_PAD(0x3AC, 0x080, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT8__EMI_EMI_DEBUG_13 = IOMUX_PAD(0x3AC, 0x080, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT8__USBPHY2_AVALID = IOMUX_PAD(0x3AC, 0x080, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9 = IOMUX_PAD(0x3B0, 0x084, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT9__GPIO4_30 = IOMUX_PAD(0x3B0, 0x084, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT9__PWM2_PWMO = IOMUX_PAD(0x3B0, 0x084, 2, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT9__WDOG2_WDOG_B = IOMUX_PAD(0x3B0, 0x084, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT9__SDMA_DEBUG_EVENT_CHANNEL_2 = IOMUX_PAD(0x3B0, 0x084, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT9__EMI_EMI_DEBUG_14 = IOMUX_PAD(0x3B0, 0x084, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT9__USBPHY2_VSTATUS_0 = IOMUX_PAD(0x3B0, 0x084, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10 = IOMUX_PAD(0x3B4, 0x088, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT10__GPIO4_31 = IOMUX_PAD(0x3B4, 0x088, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP = IOMUX_PAD(0x3B4, 0x088, 2, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT10__SDMA_DEBUG_EVENT_CHANNEL_3 + = IOMUX_PAD(0x3B4, 0x088, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT10__EMI_EMI_DEBUG_15 = IOMUX_PAD(0x3B4, 0x088, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT10__USBPHY2_VSTATUS_1 = IOMUX_PAD(0x3B4, 0x088, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11 = IOMUX_PAD(0x3B8, 0x08C, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT11__GPIO5_5 = IOMUX_PAD(0x3B8, 0x08C, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT = IOMUX_PAD(0x3B8, 0x08C, 2, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT11__SDMA_DEBUG_EVENT_CHANNEL_4 + = IOMUX_PAD(0x3B8, 0x08C, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT11__EMI_EMI_DEBUG_16 = IOMUX_PAD(0x3B8, 0x08C, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT11__USBPHY2_VSTATUS_2 = IOMUX_PAD(0x3B8, 0x08C, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12 = IOMUX_PAD(0x3BC, 0x090, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT12__GPIO5_6 = IOMUX_PAD(0x3BC, 0x090, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK = IOMUX_PAD(0x3BC, 0x090, 2, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT12__SDMA_DEBUG_EVENT_CHANNEL_5 + = IOMUX_PAD(0x3BC, 0x090, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT12__EMI_EMI_DEBUG_17 = IOMUX_PAD(0x3BC, 0x090, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT12__USBPHY2_VSTATUS_3 = IOMUX_PAD(0x3BC, 0x090, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13 = IOMUX_PAD(0x3C0, 0x094, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT13__GPIO5_7 = IOMUX_PAD(0x3C0, 0x094, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS = IOMUX_PAD(0x3C0, 0x094, 3, 0x754, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT13__SDMA_DEBUG_EVT_CHN_LINES_0 + = IOMUX_PAD(0x3C0, 0x094, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT13__EMI_EMI_DEBUG_18 = IOMUX_PAD(0x3C0, 0x094, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT13__USBPHY2_VSTATUS_4 = IOMUX_PAD(0x3C0, 0x094, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14 = IOMUX_PAD(0x3C4, 0x098, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT14__GPIO5_8 = IOMUX_PAD(0x3C4, 0x098, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC = IOMUX_PAD(0x3C4, 0x098, 3, 0x750, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT14__SDMA_DEBUG_EVT_CHN_LINES_1 + = IOMUX_PAD(0x3C4, 0x098, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT14__EMI_EMI_DEBUG_19 = IOMUX_PAD(0x3C4, 0x098, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT14__USBPHY2_VSTATUS_5 = IOMUX_PAD(0x3C4, 0x098, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15 = IOMUX_PAD(0x3C8, 0x09C, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT15__GPIO5_9 = IOMUX_PAD(0x3C8, 0x09C, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT15__ECSPI1_SS1 = IOMUX_PAD(0x3C8, 0x09C, 2, 0x7AC, 1, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT15__ECSPI2_SS1 = IOMUX_PAD(0x3C8, 0x09C, 3, 0x7C8, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT15__SDMA_DEBUG_EVT_CHN_LINES_2 + = IOMUX_PAD(0x3C8, 0x09C, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT15__EMI_EMI_DEBUG_20 = IOMUX_PAD(0x3C8, 0x09C, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT15__USBPHY2_VSTATUS_6 = IOMUX_PAD(0x3C8, 0x09C, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16 = IOMUX_PAD(0x3CC, 0x0A0, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT16__GPIO5_10 = IOMUX_PAD(0x3CC, 0x0A0, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT16__ECSPI2_MOSI = IOMUX_PAD(0x3CC, 0x0A0, 2, 0x7C0, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC = IOMUX_PAD(0x3CC, 0x0A0, 3, 0x758, 1, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0 = IOMUX_PAD(0x3CC, 0x0A0, 4, 0x868, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT16__SDMA_DEBUG_EVT_CHN_LINES_3 + = IOMUX_PAD(0x3CC, 0x0A0, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT16__EMI_EMI_DEBUG_21 = IOMUX_PAD(0x3CC, 0x0A0, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT16__USBPHY2_VSTATUS_7 = IOMUX_PAD(0x3CC, 0x0A0, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17 = IOMUX_PAD(0x3D0, 0x0A4, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT17__GPIO5_11 = IOMUX_PAD(0x3D0, 0x0A4, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT17__ECSPI2_MISO = IOMUX_PAD(0x3D0, 0x0A4, 2, 0x7BC, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD = IOMUX_PAD(0x3D0, 0x0A4, 3, 0x74C, 1, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1 = IOMUX_PAD(0x3D0, 0x0A4, 4, 0x86C, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT17__SDMA_DEBUG_EVT_CHN_LINES_4 + = IOMUX_PAD(0x3D0, 0x0A4, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT17__EMI_EMI_DEBUG_22 = IOMUX_PAD(0x3D0, 0x0A4, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18 = IOMUX_PAD(0x3D4, 0x0A8, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT18__GPIO5_12 = IOMUX_PAD(0x3D4, 0x0A8, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT18__ECSPI2_SS0 = IOMUX_PAD(0x3D4, 0x0A8, 2, 0x7C4, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS = IOMUX_PAD(0x3D4, 0x0A8, 3, 0x75C, 1, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS = IOMUX_PAD(0x3D4, 0x0A8, 4, 0x73C, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT18__SDMA_DEBUG_EVT_CHN_LINES_5 + = IOMUX_PAD(0x3D4, 0x0A8, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT18__EMI_EMI_DEBUG_23 = IOMUX_PAD(0x3D4, 0x0A8, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT18__EMI_WEIM_CS_2 = IOMUX_PAD(0x3D4, 0x0A8, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19 = IOMUX_PAD(0x3D8, 0x0AC, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT19__GPIO5_13 = IOMUX_PAD(0x3D8, 0x0AC, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT19__ECSPI2_SCLK = IOMUX_PAD(0x3D8, 0x0AC, 2, 0x7B8, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD = IOMUX_PAD(0x3D8, 0x0AC, 3, 0x748, 1, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC = IOMUX_PAD(0x3D8, 0x0AC, 4, 0x738, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT19__SDMA_DEBUG_EVT_CHN_LINES_6 + = IOMUX_PAD(0x3D8, 0x0AC, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT19__EMI_EMI_DEBUG_24 = IOMUX_PAD(0x3D8, 0x0AC, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT19__EMI_WEIM_CS_3 = IOMUX_PAD(0x3D8, 0x0AC, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20 = IOMUX_PAD(0x3DC, 0x0B0, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT20__GPIO5_14 = IOMUX_PAD(0x3DC, 0x0B0, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT20__ECSPI1_SCLK = IOMUX_PAD(0x3DC, 0x0B0, 2, 0x79C, 1, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC = IOMUX_PAD(0x3DC, 0x0B0, 3, 0x740, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT20__SDMA_DEBUG_EVT_CHN_LINES_7 + = IOMUX_PAD(0x3DC, 0x0B0, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT20__EMI_EMI_DEBUG_25 = IOMUX_PAD(0x3DC, 0x0B0, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT20__SATA_PHY_TDI = IOMUX_PAD(0x3DC, 0x0B0, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21 = IOMUX_PAD(0x3E0, 0x0B4, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT21__GPIO5_15 = IOMUX_PAD(0x3E0, 0x0B4, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT21__ECSPI1_MOSI = IOMUX_PAD(0x3E0, 0x0B4, 2, 0x7A4, 1, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD = IOMUX_PAD(0x3E0, 0x0B4, 3, 0x734, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT21__SDMA_DEBUG_BUS_DEVICE_0 = IOMUX_PAD(0x3E0, 0x0B4, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT21__EMI_EMI_DEBUG_26 = IOMUX_PAD(0x3E0, 0x0B4, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT21__SATA_PHY_TDO = IOMUX_PAD(0x3E0, 0x0B4, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22 = IOMUX_PAD(0x3E4, 0x0B8, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT22__GPIO5_16 = IOMUX_PAD(0x3E4, 0x0B8, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT22__ECSPI1_MISO = IOMUX_PAD(0x3E4, 0x0B8, 2, 0x7A0, 1, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS = IOMUX_PAD(0x3E4, 0x0B8, 3, 0x744, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT22__SDMA_DEBUG_BUS_DEVICE_1 = IOMUX_PAD(0x3E4, 0x0B8, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT22__EMI_EMI_DEBUG_27 = IOMUX_PAD(0x3E4, 0x0B8, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT22__SATA_PHY_TCK = IOMUX_PAD(0x3E4, 0x0B8, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 = IOMUX_PAD(0x3E8, 0x0BC, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT23__GPIO5_17 = IOMUX_PAD(0x3E8, 0x0BC, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT23__ECSPI1_SS0 = IOMUX_PAD(0x3E8, 0x0BC, 2, 0x7A8, 1, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD = IOMUX_PAD(0x3E8, 0x0BC, 3, 0x730, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT23__SDMA_DEBUG_BUS_DEVICE_2 = IOMUX_PAD(0x3E8, 0x0BC, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT23__EMI_EMI_DEBUG_28 = IOMUX_PAD(0x3E8, 0x0BC, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_DISP0_DAT23__SATA_PHY_TMS = IOMUX_PAD(0x3E8, 0x0BC, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK = IOMUX_PAD(0x3EC, 0x0C0, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_PIXCLK__GPIO5_18 = IOMUX_PAD(0x3EC, 0x0C0, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0 = IOMUX_PAD(0x3EC, 0x0C0, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_PIXCLK__EMI_EMI_DEBUG_29 = IOMUX_PAD(0x3EC, 0x0C0, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC = IOMUX_PAD(0x3F0, 0x0C4, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_MCLK__GPIO5_19 = IOMUX_PAD(0x3F0, 0x0C4, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK = IOMUX_PAD(0x3F0, 0x0C4, 2, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1 = IOMUX_PAD(0x3F0, 0x0C4, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_MCLK__EMI_EMI_DEBUG_30 = IOMUX_PAD(0x3F0, 0x0C4, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_MCLK__TPIU_TRCTL = IOMUX_PAD(0x3F0, 0x0C4, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN = IOMUX_PAD(0x3F4, 0x0C8, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DATA_EN__GPIO5_20 = IOMUX_PAD(0x3F4, 0x0C8, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2 = IOMUX_PAD(0x3F4, 0x0C8, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DATA_EN__EMI_EMI_DEBUG_31 = IOMUX_PAD(0x3F4, 0x0C8, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DATA_EN__TPIU_TRCLK = IOMUX_PAD(0x3F4, 0x0C8, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC = IOMUX_PAD(0x3F8, 0x0CC, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_VSYNC__GPIO5_21 = IOMUX_PAD(0x3F8, 0x0CC, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3 = IOMUX_PAD(0x3F8, 0x0CC, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_VSYNC__EMI_EMI_DEBUG_32 = IOMUX_PAD(0x3F8, 0x0CC, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_VSYNC__TPIU_TRACE_0 = IOMUX_PAD(0x3F8, 0x0CC, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT4__IPU_CSI0_D_4 = IOMUX_PAD(0x3FC, 0x0D0, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT4__GPIO5_22 = IOMUX_PAD(0x3FC, 0x0D0, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT4__KPP_COL_5 = IOMUX_PAD(0x3FC, 0x0D0, 2, 0x840, 1, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT4__ECSPI1_SCLK = IOMUX_PAD(0x3FC, 0x0D0, 3, 0x79C, 2, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP = IOMUX_PAD(0x3FC, 0x0D0, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC = IOMUX_PAD(0x3FC, 0x0D0, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT4__EMI_EMI_DEBUG_33 = IOMUX_PAD(0x3FC, 0x0D0, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT4__TPIU_TRACE_1 = IOMUX_PAD(0x3FC, 0x0D0, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT5__IPU_CSI0_D_5 = IOMUX_PAD(0x400, 0x0D4, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT5__GPIO5_23 = IOMUX_PAD(0x400, 0x0D4, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT5__KPP_ROW_5 = IOMUX_PAD(0x400, 0x0D4, 2, 0x84C, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT5__ECSPI1_MOSI = IOMUX_PAD(0x400, 0x0D4, 3, 0x7A4, 2, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT = IOMUX_PAD(0x400, 0x0D4, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD = IOMUX_PAD(0x400, 0x0D4, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT5__EMI_EMI_DEBUG_34 = IOMUX_PAD(0x400, 0x0D4, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT5__TPIU_TRACE_2 = IOMUX_PAD(0x400, 0x0D4, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT6__IPU_CSI0_D_6 = IOMUX_PAD(0x404, 0x0D8, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT6__GPIO5_24 = IOMUX_PAD(0x404, 0x0D8, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT6__KPP_COL_6 = IOMUX_PAD(0x404, 0x0D8, 2, 0x844, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT6__ECSPI1_MISO = IOMUX_PAD(0x404, 0x0D8, 3, 0x7A0, 2, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK = IOMUX_PAD(0x404, 0x0D8, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS = IOMUX_PAD(0x404, 0x0D8, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT6__EMI_EMI_DEBUG_35 = IOMUX_PAD(0x404, 0x0D8, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT6__TPIU_TRACE_3 = IOMUX_PAD(0x404, 0x0D8, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT7__IPU_CSI0_D_7 = IOMUX_PAD(0x408, 0x0DC, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT7__GPIO5_25 = IOMUX_PAD(0x408, 0x0DC, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT7__KPP_ROW_6 = IOMUX_PAD(0x408, 0x0DC, 2, 0x850, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT7__ECSPI1_SS0 = IOMUX_PAD(0x408, 0x0DC, 3, 0x7A8, 2, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR = IOMUX_PAD(0x408, 0x0DC, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD = IOMUX_PAD(0x408, 0x0DC, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT7__EMI_EMI_DEBUG_36 = IOMUX_PAD(0x408, 0x0DC, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT7__TPIU_TRACE_4 = IOMUX_PAD(0x408, 0x0DC, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT8__IPU_CSI0_D_8 = IOMUX_PAD(0x40C, 0x0E0, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT8__GPIO5_26 = IOMUX_PAD(0x40C, 0x0E0, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT8__KPP_COL_7 = IOMUX_PAD(0x40C, 0x0E0, 2, 0x848, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT8__ECSPI2_SCLK = IOMUX_PAD(0x40C, 0x0E0, 3, 0x7B8, 1, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC = IOMUX_PAD(0x40C, 0x0E0, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT8__I2C1_SDA = IOMUX_PAD(0x40C, 0x0E0, 5 | IOMUX_CONFIG_SION, 0x818, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37 = IOMUX_PAD(0x40C, 0x0E0, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT8__TPIU_TRACE_5 = IOMUX_PAD(0x40C, 0x0E0, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 = IOMUX_PAD(0x410, 0x0E4, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT9__GPIO5_27 = IOMUX_PAD(0x410, 0x0E4, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT9__KPP_ROW_7 = IOMUX_PAD(0x410, 0x0E4, 2, 0x854, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT9__ECSPI2_MOSI = IOMUX_PAD(0x410, 0x0E4, 3, 0x7C0, 1, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR = IOMUX_PAD(0x410, 0x0E4, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT9__I2C1_SCL = IOMUX_PAD(0x410, 0x0E4, 5 | IOMUX_CONFIG_SION, 0x814, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38 = IOMUX_PAD(0x410, 0x0E4, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT9__TPIU_TRACE_6 = IOMUX_PAD(0x410, 0x0E4, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 = IOMUX_PAD(0x414, 0x0E8, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT10__GPIO5_28 = IOMUX_PAD(0x414, 0x0E8, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT10__UART1_TXD_MUX = IOMUX_PAD(0x414, 0x0E8, 2, __NA_, 0, MX53_UART_PAD_CTRL), + MX53_PAD_CSI0_DAT10__ECSPI2_MISO = IOMUX_PAD(0x414, 0x0E8, 3, 0x7BC, 1, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC = IOMUX_PAD(0x414, 0x0E8, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4 = IOMUX_PAD(0x414, 0x0E8, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT10__EMI_EMI_DEBUG_39 = IOMUX_PAD(0x414, 0x0E8, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT10__TPIU_TRACE_7 = IOMUX_PAD(0x414, 0x0E8, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT11__IPU_CSI0_D_11 = IOMUX_PAD(0x418, 0x0EC, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT11__GPIO5_29 = IOMUX_PAD(0x418, 0x0EC, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT11__UART1_RXD_MUX = IOMUX_PAD(0x418, 0x0EC, 2, 0x878, 1, MX53_UART_PAD_CTRL), + MX53_PAD_CSI0_DAT11__ECSPI2_SS0 = IOMUX_PAD(0x418, 0x0EC, 3, 0x7C4, 1, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS = IOMUX_PAD(0x418, 0x0EC, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5 = IOMUX_PAD(0x418, 0x0EC, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT11__EMI_EMI_DEBUG_40 = IOMUX_PAD(0x418, 0x0EC, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT11__TPIU_TRACE_8 = IOMUX_PAD(0x418, 0x0EC, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 = IOMUX_PAD(0x41C, 0x0F0, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT12__GPIO5_30 = IOMUX_PAD(0x41C, 0x0F0, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT12__UART4_TXD_MUX = IOMUX_PAD(0x41C, 0x0F0, 2, __NA_, 0, MX53_UART_PAD_CTRL), + MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0 = IOMUX_PAD(0x41C, 0x0F0, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6 = IOMUX_PAD(0x41C, 0x0F0, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT12__EMI_EMI_DEBUG_41 = IOMUX_PAD(0x41C, 0x0F0, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT12__TPIU_TRACE_9 = IOMUX_PAD(0x41C, 0x0F0, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 = IOMUX_PAD(0x420, 0x0F4, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT13__GPIO5_31 = IOMUX_PAD(0x420, 0x0F4, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT13__UART4_RXD_MUX = IOMUX_PAD(0x420, 0x0F4, 2, 0x890, 3, MX53_UART_PAD_CTRL), + MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1 = IOMUX_PAD(0x420, 0x0F4, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7 = IOMUX_PAD(0x420, 0x0F4, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT13__EMI_EMI_DEBUG_42 = IOMUX_PAD(0x420, 0x0F4, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT13__TPIU_TRACE_10 = IOMUX_PAD(0x420, 0x0F4, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 = IOMUX_PAD(0x424, 0x0F8, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT14__GPIO6_0 = IOMUX_PAD(0x424, 0x0F8, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT14__UART5_TXD_MUX = IOMUX_PAD(0x424, 0x0F8, 2, __NA_, 0, MX53_UART_PAD_CTRL), + MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2 = IOMUX_PAD(0x424, 0x0F8, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8 = IOMUX_PAD(0x424, 0x0F8, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT14__EMI_EMI_DEBUG_43 = IOMUX_PAD(0x424, 0x0F8, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT14__TPIU_TRACE_11 = IOMUX_PAD(0x424, 0x0F8, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 = IOMUX_PAD(0x428, 0x0FC, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT15__GPIO6_1 = IOMUX_PAD(0x428, 0x0FC, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT15__UART5_RXD_MUX = IOMUX_PAD(0x428, 0x0FC, 2, 0x898, 3, MX53_UART_PAD_CTRL), + MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3 = IOMUX_PAD(0x428, 0x0FC, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9 = IOMUX_PAD(0x428, 0x0FC, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT15__EMI_EMI_DEBUG_44 = IOMUX_PAD(0x428, 0x0FC, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT15__TPIU_TRACE_12 = IOMUX_PAD(0x428, 0x0FC, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 = IOMUX_PAD(0x42C, 0x100, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT16__GPIO6_2 = IOMUX_PAD(0x42C, 0x100, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT16__UART4_RTS = IOMUX_PAD(0x42C, 0x100, 2, 0x88C, 0, MX53_UART_PAD_CTRL), + MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4 = IOMUX_PAD(0x42C, 0x100, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10 = IOMUX_PAD(0x42C, 0x100, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT16__EMI_EMI_DEBUG_45 = IOMUX_PAD(0x42C, 0x100, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT16__TPIU_TRACE_13 = IOMUX_PAD(0x42C, 0x100, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 = IOMUX_PAD(0x430, 0x104, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT17__GPIO6_3 = IOMUX_PAD(0x430, 0x104, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT17__UART4_CTS = IOMUX_PAD(0x430, 0x104, 2, __NA_, 0, MX53_UART_PAD_CTRL), + MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5 = IOMUX_PAD(0x430, 0x104, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11 = IOMUX_PAD(0x430, 0x104, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT17__EMI_EMI_DEBUG_46 = IOMUX_PAD(0x430, 0x104, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT17__TPIU_TRACE_14 = IOMUX_PAD(0x430, 0x104, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 = IOMUX_PAD(0x434, 0x108, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT18__GPIO6_4 = IOMUX_PAD(0x434, 0x108, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT18__UART5_RTS = IOMUX_PAD(0x434, 0x108, 2, 0x894, 2, MX53_UART_PAD_CTRL), + MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6 = IOMUX_PAD(0x434, 0x108, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12 = IOMUX_PAD(0x434, 0x108, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT18__EMI_EMI_DEBUG_47 = IOMUX_PAD(0x434, 0x108, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT18__TPIU_TRACE_15 = IOMUX_PAD(0x434, 0x108, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 = IOMUX_PAD(0x438, 0x10C, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT19__GPIO6_5 = IOMUX_PAD(0x438, 0x10C, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT19__UART5_CTS = IOMUX_PAD(0x438, 0x10C, 2, __NA_, 0, MX53_UART_PAD_CTRL), + MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7 = IOMUX_PAD(0x438, 0x10C, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13 = IOMUX_PAD(0x438, 0x10C, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT19__EMI_EMI_DEBUG_48 = IOMUX_PAD(0x438, 0x10C, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_CSI0_DAT19__USBPHY2_BISTOK = IOMUX_PAD(0x438, 0x10C, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A25__EMI_WEIM_A_25 = IOMUX_PAD(0x458, 0x110, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A25__GPIO5_2 = IOMUX_PAD(0x458, 0x110, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A25__ECSPI2_RDY = IOMUX_PAD(0x458, 0x110, 2, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A25__IPU_DI1_PIN12 = IOMUX_PAD(0x458, 0x110, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A25__CSPI_SS1 = IOMUX_PAD(0x458, 0x110, 4, 0x790, 1, NO_PAD_CTRL), + MX53_PAD_EIM_A25__IPU_DI0_D1_CS = IOMUX_PAD(0x458, 0x110, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A25__USBPHY1_BISTOK = IOMUX_PAD(0x458, 0x110, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_EB2__EMI_WEIM_EB_2 = IOMUX_PAD(0x45C, 0x114, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_EB2__GPIO2_30 = IOMUX_PAD(0x45C, 0x114, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK = IOMUX_PAD(0x45C, 0x114, 2, 0x76C, 0, NO_PAD_CTRL), + MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS = IOMUX_PAD(0x45C, 0x114, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_EB2__ECSPI1_SS0 = IOMUX_PAD(0x45C, 0x114, 4, 0x7A8, 3, NO_PAD_CTRL), + MX53_PAD_EIM_EB2__I2C2_SCL = IOMUX_PAD(0x45C, 0x114, 5 | IOMUX_CONFIG_SION, 0x81C, 1, NO_PAD_CTRL), + MX53_PAD_EIM_D16__EMI_WEIM_D_16 = IOMUX_PAD(0x460, 0x118, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D16__GPIO3_16 = IOMUX_PAD(0x460, 0x118, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D16__IPU_DI0_PIN5 = IOMUX_PAD(0x460, 0x118, 2, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK = IOMUX_PAD(0x460, 0x118, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D16__ECSPI1_SCLK = IOMUX_PAD(0x460, 0x118, 4, 0x79C, 3, NO_PAD_CTRL), + MX53_PAD_EIM_D16__I2C2_SDA = IOMUX_PAD(0x460, 0x118, 5 | IOMUX_CONFIG_SION, 0x820, 1, NO_PAD_CTRL), + MX53_PAD_EIM_D17__EMI_WEIM_D_17 = IOMUX_PAD(0x464, 0x11C, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D17__GPIO3_17 = IOMUX_PAD(0x464, 0x11C, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D17__IPU_DI0_PIN6 = IOMUX_PAD(0x464, 0x11C, 2, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN = IOMUX_PAD(0x464, 0x11C, 3, 0x830, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D17__ECSPI1_MISO = IOMUX_PAD(0x464, 0x11C, 4, 0x7A0, 3, NO_PAD_CTRL), + MX53_PAD_EIM_D17__I2C3_SCL = IOMUX_PAD(0x464, 0x11C, 5 | IOMUX_CONFIG_SION, 0x824, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D18__EMI_WEIM_D_18 = IOMUX_PAD(0x468, 0x120, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D18__GPIO3_18 = IOMUX_PAD(0x468, 0x120, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D18__IPU_DI0_PIN7 = IOMUX_PAD(0x468, 0x120, 2, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO = IOMUX_PAD(0x468, 0x120, 3, 0x830, 1, NO_PAD_CTRL), + MX53_PAD_EIM_D18__ECSPI1_MOSI = IOMUX_PAD(0x468, 0x120, 4, 0x7A4, 3, NO_PAD_CTRL), + MX53_PAD_EIM_D18__I2C3_SDA = IOMUX_PAD(0x468, 0x120, 5 | IOMUX_CONFIG_SION, 0x828, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D18__IPU_DI1_D0_CS = IOMUX_PAD(0x468, 0x120, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D19__EMI_WEIM_D_19 = IOMUX_PAD(0x46C, 0x124, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D19__GPIO3_19 = IOMUX_PAD(0x46C, 0x124, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D19__IPU_DI0_PIN8 = IOMUX_PAD(0x46C, 0x124, 2, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D19__IPU_DISPB1_SER_RS = IOMUX_PAD(0x46C, 0x124, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D19__ECSPI1_SS1 = IOMUX_PAD(0x46C, 0x124, 4, 0x7AC, 2, NO_PAD_CTRL), + MX53_PAD_EIM_D19__EPIT1_EPITO = IOMUX_PAD(0x46C, 0x124, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D19__UART1_CTS = IOMUX_PAD(0x46C, 0x124, 6, __NA_, 0, MX53_UART_PAD_CTRL), + MX53_PAD_EIM_D19__USBOH3_USBH2_OC = IOMUX_PAD(0x46C, 0x124, 7, 0x8A4, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D20__EMI_WEIM_D_20 = IOMUX_PAD(0x470, 0x128, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D20__GPIO3_20 = IOMUX_PAD(0x470, 0x128, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D20__IPU_DI0_PIN16 = IOMUX_PAD(0x470, 0x128, 2, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D20__IPU_SER_DISP0_CS = IOMUX_PAD(0x470, 0x128, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D20__CSPI_SS0 = IOMUX_PAD(0x470, 0x128, 4, 0x78C, 1, NO_PAD_CTRL), + MX53_PAD_EIM_D20__EPIT2_EPITO = IOMUX_PAD(0x470, 0x128, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D20__UART1_RTS = IOMUX_PAD(0x470, 0x128, 6, 0x874, 1, MX53_UART_PAD_CTRL), + MX53_PAD_EIM_D20__USBOH3_USBH2_PWR = IOMUX_PAD(0x470, 0x128, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D21__EMI_WEIM_D_21 = IOMUX_PAD(0x474, 0x12C, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D21__GPIO3_21 = IOMUX_PAD(0x474, 0x12C, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D21__IPU_DI0_PIN17 = IOMUX_PAD(0x474, 0x12C, 2, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK = IOMUX_PAD(0x474, 0x12C, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D21__CSPI_SCLK = IOMUX_PAD(0x474, 0x12C, 4, 0x780, 1, NO_PAD_CTRL), + MX53_PAD_EIM_D21__I2C1_SCL = IOMUX_PAD(0x474, 0x12C, 5 | IOMUX_CONFIG_SION, 0x814, 1, NO_PAD_CTRL), + MX53_PAD_EIM_D21__USBOH3_USBOTG_OC = IOMUX_PAD(0x474, 0x12C, 6, 0x89C, 1, NO_PAD_CTRL), + MX53_PAD_EIM_D22__EMI_WEIM_D_22 = IOMUX_PAD(0x478, 0x130, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D22__GPIO3_22 = IOMUX_PAD(0x478, 0x130, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D22__IPU_DI0_PIN1 = IOMUX_PAD(0x478, 0x130, 2, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN = IOMUX_PAD(0x478, 0x130, 3, 0x82C, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D22__CSPI_MISO = IOMUX_PAD(0x478, 0x130, 4, 0x784, 1, NO_PAD_CTRL), + MX53_PAD_EIM_D22__USBOH3_USBOTG_PWR = IOMUX_PAD(0x478, 0x130, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D23__EMI_WEIM_D_23 = IOMUX_PAD(0x47C, 0x134, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D23__GPIO3_23 = IOMUX_PAD(0x47C, 0x134, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D23__UART3_CTS = IOMUX_PAD(0x47C, 0x134, 2, __NA_, 0, MX53_UART_PAD_CTRL), + MX53_PAD_EIM_D23__UART1_DCD = IOMUX_PAD(0x47C, 0x134, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D23__IPU_DI0_D0_CS = IOMUX_PAD(0x47C, 0x134, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D23__IPU_DI1_PIN2 = IOMUX_PAD(0x47C, 0x134, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D23__IPU_CSI1_DATA_EN = IOMUX_PAD(0x47C, 0x134, 6, 0x834, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D23__IPU_DI1_PIN14 = IOMUX_PAD(0x47C, 0x134, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_EB3__EMI_WEIM_EB_3 = IOMUX_PAD(0x480, 0x138, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_EB3__GPIO2_31 = IOMUX_PAD(0x480, 0x138, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_EB3__UART3_RTS = IOMUX_PAD(0x480, 0x138, 2, 0x884, 1, MX53_UART_PAD_CTRL), + MX53_PAD_EIM_EB3__UART1_RI = IOMUX_PAD(0x480, 0x138, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_EB3__IPU_DI1_PIN3 = IOMUX_PAD(0x480, 0x138, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_EB3__IPU_CSI1_HSYNC = IOMUX_PAD(0x480, 0x138, 6, 0x838, 0, NO_PAD_CTRL), + MX53_PAD_EIM_EB3__IPU_DI1_PIN16 = IOMUX_PAD(0x480, 0x138, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D24__EMI_WEIM_D_24 = IOMUX_PAD(0x484, 0x13C, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D24__GPIO3_24 = IOMUX_PAD(0x484, 0x13C, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D24__UART3_TXD_MUX = IOMUX_PAD(0x484, 0x13C, 2, __NA_, 0, MX53_UART_PAD_CTRL), + MX53_PAD_EIM_D24__ECSPI1_SS2 = IOMUX_PAD(0x484, 0x13C, 3, 0x7B0, 1, NO_PAD_CTRL), + MX53_PAD_EIM_D24__CSPI_SS2 = IOMUX_PAD(0x484, 0x13C, 4, 0x794, 1, NO_PAD_CTRL), + MX53_PAD_EIM_D24__AUDMUX_AUD5_RXFS = IOMUX_PAD(0x484, 0x13C, 5, 0x754, 1, NO_PAD_CTRL), + MX53_PAD_EIM_D24__ECSPI2_SS2 = IOMUX_PAD(0x484, 0x13C, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D24__UART1_DTR = IOMUX_PAD(0x484, 0x13C, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D25__EMI_WEIM_D_25 = IOMUX_PAD(0x488, 0x140, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D25__GPIO3_25 = IOMUX_PAD(0x488, 0x140, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D25__UART3_RXD_MUX = IOMUX_PAD(0x488, 0x140, 2, 0x888, 1, MX53_UART_PAD_CTRL), + MX53_PAD_EIM_D25__ECSPI1_SS3 = IOMUX_PAD(0x488, 0x140, 3, 0x7B4, 1, NO_PAD_CTRL), + MX53_PAD_EIM_D25__CSPI_SS3 = IOMUX_PAD(0x488, 0x140, 4, 0x798, 1, NO_PAD_CTRL), + MX53_PAD_EIM_D25__AUDMUX_AUD5_RXC = IOMUX_PAD(0x488, 0x140, 5, 0x750, 1, NO_PAD_CTRL), + MX53_PAD_EIM_D25__ECSPI2_SS3 = IOMUX_PAD(0x488, 0x140, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D25__UART1_DSR = IOMUX_PAD(0x488, 0x140, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D26__EMI_WEIM_D_26 = IOMUX_PAD(0x48C, 0x144, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D26__GPIO3_26 = IOMUX_PAD(0x48C, 0x144, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D26__UART2_TXD_MUX = IOMUX_PAD(0x48C, 0x144, 2, __NA_, 0, MX53_UART_PAD_CTRL), + MX53_PAD_EIM_D26__FIRI_RXD = IOMUX_PAD(0x48C, 0x144, 3, 0x80C, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D26__IPU_CSI0_D_1 = IOMUX_PAD(0x48C, 0x144, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D26__IPU_DI1_PIN11 = IOMUX_PAD(0x48C, 0x144, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D26__IPU_SISG_2 = IOMUX_PAD(0x48C, 0x144, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 = IOMUX_PAD(0x48C, 0x144, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D27__EMI_WEIM_D_27 = IOMUX_PAD(0x490, 0x148, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D27__GPIO3_27 = IOMUX_PAD(0x490, 0x148, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D27__UART2_RXD_MUX = IOMUX_PAD(0x490, 0x148, 2, 0x880, 1, MX53_UART_PAD_CTRL), + MX53_PAD_EIM_D27__FIRI_TXD = IOMUX_PAD(0x490, 0x148, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D27__IPU_CSI0_D_0 = IOMUX_PAD(0x490, 0x148, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D27__IPU_DI1_PIN13 = IOMUX_PAD(0x490, 0x148, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D27__IPU_SISG_3 = IOMUX_PAD(0x490, 0x148, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 = IOMUX_PAD(0x490, 0x148, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D28__EMI_WEIM_D_28 = IOMUX_PAD(0x494, 0x14C, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D28__GPIO3_28 = IOMUX_PAD(0x494, 0x14C, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D28__UART2_CTS = IOMUX_PAD(0x494, 0x14C, 2, __NA_, 0, MX53_UART_PAD_CTRL), + MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO = IOMUX_PAD(0x494, 0x14C, 3, 0x82C, 1, NO_PAD_CTRL), + MX53_PAD_EIM_D28__CSPI_MOSI = IOMUX_PAD(0x494, 0x14C, 4, 0x788, 1, NO_PAD_CTRL), + MX53_PAD_EIM_D28__I2C1_SDA = IOMUX_PAD(0x494, 0x14C, 5 | IOMUX_CONFIG_SION, 0x818, 1, NO_PAD_CTRL), + MX53_PAD_EIM_D28__IPU_EXT_TRIG = IOMUX_PAD(0x494, 0x14C, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D28__IPU_DI0_PIN13 = IOMUX_PAD(0x494, 0x14C, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D29__EMI_WEIM_D_29 = IOMUX_PAD(0x498, 0x150, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D29__GPIO3_29 = IOMUX_PAD(0x498, 0x150, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D29__UART2_RTS = IOMUX_PAD(0x498, 0x150, 2, 0x87C, 1, MX53_UART_PAD_CTRL), + MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS = IOMUX_PAD(0x498, 0x150, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D29__CSPI_SS0 = IOMUX_PAD(0x498, 0x150, 4, 0x78C, 2, NO_PAD_CTRL), + MX53_PAD_EIM_D29__IPU_DI1_PIN15 = IOMUX_PAD(0x498, 0x150, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D29__IPU_CSI1_VSYNC = IOMUX_PAD(0x498, 0x150, 6, 0x83C, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D29__IPU_DI0_PIN14 = IOMUX_PAD(0x498, 0x150, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D30__EMI_WEIM_D_30 = IOMUX_PAD(0x49C, 0x154, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D30__GPIO3_30 = IOMUX_PAD(0x49C, 0x154, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D30__UART3_CTS = IOMUX_PAD(0x49C, 0x154, 2, __NA_, 0, MX53_UART_PAD_CTRL), + MX53_PAD_EIM_D30__IPU_CSI0_D_3 = IOMUX_PAD(0x49C, 0x154, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D30__IPU_DI0_PIN11 = IOMUX_PAD(0x49C, 0x154, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 = IOMUX_PAD(0x49C, 0x154, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D30__USBOH3_USBH1_OC = IOMUX_PAD(0x49C, 0x154, 6, 0x8A0, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D30__USBOH3_USBH2_OC = IOMUX_PAD(0x49C, 0x154, 7, 0x8A4, 1, NO_PAD_CTRL), + MX53_PAD_EIM_D31__EMI_WEIM_D_31 = IOMUX_PAD(0x4A0, 0x158, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D31__GPIO3_31 = IOMUX_PAD(0x4A0, 0x158, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D31__UART3_RTS = IOMUX_PAD(0x4A0, 0x158, 2, 0x884, 3, MX53_UART_PAD_CTRL), + MX53_PAD_EIM_D31__IPU_CSI0_D_2 = IOMUX_PAD(0x4A0, 0x158, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D31__IPU_DI0_PIN12 = IOMUX_PAD(0x4A0, 0x158, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 = IOMUX_PAD(0x4A0, 0x158, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D31__USBOH3_USBH1_PWR = IOMUX_PAD(0x4A0, 0x158, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_D31__USBOH3_USBH2_PWR = IOMUX_PAD(0x4A0, 0x158, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A24__EMI_WEIM_A_24 = IOMUX_PAD(0x4A8, 0x15C, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A24__GPIO5_4 = IOMUX_PAD(0x4A8, 0x15C, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 = IOMUX_PAD(0x4A8, 0x15C, 2, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A24__IPU_CSI1_D_19 = IOMUX_PAD(0x4A8, 0x15C, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A24__IPU_SISG_2 = IOMUX_PAD(0x4A8, 0x15C, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A24__USBPHY2_BVALID = IOMUX_PAD(0x4A8, 0x15C, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A23__EMI_WEIM_A_23 = IOMUX_PAD(0x4AC, 0x160, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A23__GPIO6_6 = IOMUX_PAD(0x4AC, 0x160, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 = IOMUX_PAD(0x4AC, 0x160, 2, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A23__IPU_CSI1_D_18 = IOMUX_PAD(0x4AC, 0x160, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A23__IPU_SISG_3 = IOMUX_PAD(0x4AC, 0x160, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A23__USBPHY2_ENDSESSION = IOMUX_PAD(0x4AC, 0x160, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A22__EMI_WEIM_A_22 = IOMUX_PAD(0x4B0, 0x164, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A22__GPIO2_16 = IOMUX_PAD(0x4B0, 0x164, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 = IOMUX_PAD(0x4B0, 0x164, 2, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A22__IPU_CSI1_D_17 = IOMUX_PAD(0x4B0, 0x164, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A22__SRC_BT_CFG1_7 = IOMUX_PAD(0x4B0, 0x164, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A21__EMI_WEIM_A_21 = IOMUX_PAD(0x4B4, 0x168, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A21__GPIO2_17 = IOMUX_PAD(0x4B4, 0x168, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 = IOMUX_PAD(0x4B4, 0x168, 2, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A21__IPU_CSI1_D_16 = IOMUX_PAD(0x4B4, 0x168, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A21__SRC_BT_CFG1_6 = IOMUX_PAD(0x4B4, 0x168, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A20__EMI_WEIM_A_20 = IOMUX_PAD(0x4B8, 0x16C, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A20__GPIO2_18 = IOMUX_PAD(0x4B8, 0x16C, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 = IOMUX_PAD(0x4B8, 0x16C, 2, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A20__IPU_CSI1_D_15 = IOMUX_PAD(0x4B8, 0x16C, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A20__SRC_BT_CFG1_5 = IOMUX_PAD(0x4B8, 0x16C, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A19__EMI_WEIM_A_19 = IOMUX_PAD(0x4BC, 0x170, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A19__GPIO2_19 = IOMUX_PAD(0x4BC, 0x170, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 = IOMUX_PAD(0x4BC, 0x170, 2, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A19__IPU_CSI1_D_14 = IOMUX_PAD(0x4BC, 0x170, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A19__SRC_BT_CFG1_4 = IOMUX_PAD(0x4BC, 0x170, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A18__EMI_WEIM_A_18 = IOMUX_PAD(0x4C0, 0x174, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A18__GPIO2_20 = IOMUX_PAD(0x4C0, 0x174, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 = IOMUX_PAD(0x4C0, 0x174, 2, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A18__IPU_CSI1_D_13 = IOMUX_PAD(0x4C0, 0x174, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A18__SRC_BT_CFG1_3 = IOMUX_PAD(0x4C0, 0x174, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A17__EMI_WEIM_A_17 = IOMUX_PAD(0x4C4, 0x178, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A17__GPIO2_21 = IOMUX_PAD(0x4C4, 0x178, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 = IOMUX_PAD(0x4C4, 0x178, 2, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A17__IPU_CSI1_D_12 = IOMUX_PAD(0x4C4, 0x178, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A17__SRC_BT_CFG1_2 = IOMUX_PAD(0x4C4, 0x178, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A16__EMI_WEIM_A_16 = IOMUX_PAD(0x4C8, 0x17C, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A16__GPIO2_22 = IOMUX_PAD(0x4C8, 0x17C, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK = IOMUX_PAD(0x4C8, 0x17C, 2, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A16__IPU_CSI1_PIXCLK = IOMUX_PAD(0x4C8, 0x17C, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_A16__SRC_BT_CFG1_1 = IOMUX_PAD(0x4C8, 0x17C, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_CS0__EMI_WEIM_CS_0 = IOMUX_PAD(0x4CC, 0x180, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_CS0__GPIO2_23 = IOMUX_PAD(0x4CC, 0x180, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_CS0__ECSPI2_SCLK = IOMUX_PAD(0x4CC, 0x180, 2, 0x7B8, 2, NO_PAD_CTRL), + MX53_PAD_EIM_CS0__IPU_DI1_PIN5 = IOMUX_PAD(0x4CC, 0x180, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 = IOMUX_PAD(0x4D0, 0x184, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_CS1__GPIO2_24 = IOMUX_PAD(0x4D0, 0x184, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_CS1__ECSPI2_MOSI = IOMUX_PAD(0x4D0, 0x184, 2, 0x7C0, 2, NO_PAD_CTRL), + MX53_PAD_EIM_CS1__IPU_DI1_PIN6 = IOMUX_PAD(0x4D0, 0x184, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_OE__EMI_WEIM_OE = IOMUX_PAD(0x4D4, 0x188, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_OE__GPIO2_25 = IOMUX_PAD(0x4D4, 0x188, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_OE__ECSPI2_MISO = IOMUX_PAD(0x4D4, 0x188, 2, 0x7BC, 2, NO_PAD_CTRL), + MX53_PAD_EIM_OE__IPU_DI1_PIN7 = IOMUX_PAD(0x4D4, 0x188, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_OE__USBPHY2_IDDIG = IOMUX_PAD(0x4D4, 0x188, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_RW__EMI_WEIM_RW = IOMUX_PAD(0x4D8, 0x18C, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_RW__GPIO2_26 = IOMUX_PAD(0x4D8, 0x18C, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_RW__ECSPI2_SS0 = IOMUX_PAD(0x4D8, 0x18C, 2, 0x7C4, 2, NO_PAD_CTRL), + MX53_PAD_EIM_RW__IPU_DI1_PIN8 = IOMUX_PAD(0x4D8, 0x18C, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_RW__USBPHY2_HOSTDISCONNECT = IOMUX_PAD(0x4D8, 0x18C, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_LBA__EMI_WEIM_LBA = IOMUX_PAD(0x4DC, 0x190, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_LBA__GPIO2_27 = IOMUX_PAD(0x4DC, 0x190, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_LBA__ECSPI2_SS1 = IOMUX_PAD(0x4DC, 0x190, 2, 0x7C8, 1, NO_PAD_CTRL), + MX53_PAD_EIM_LBA__IPU_DI1_PIN17 = IOMUX_PAD(0x4DC, 0x190, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_LBA__SRC_BT_CFG1_0 = IOMUX_PAD(0x4DC, 0x190, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_EB0__EMI_WEIM_EB_0 = IOMUX_PAD(0x4E4, 0x194, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_EB0__GPIO2_28 = IOMUX_PAD(0x4E4, 0x194, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 = IOMUX_PAD(0x4E4, 0x194, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_EB0__IPU_CSI1_D_11 = IOMUX_PAD(0x4E4, 0x194, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_EB0__GPC_PMIC_RDY = IOMUX_PAD(0x4E4, 0x194, 5, 0x810, 0, NO_PAD_CTRL), + MX53_PAD_EIM_EB0__SRC_BT_CFG2_7 = IOMUX_PAD(0x4E4, 0x194, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_EB1__EMI_WEIM_EB_1 = IOMUX_PAD(0x4E8, 0x198, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_EB1__GPIO2_29 = IOMUX_PAD(0x4E8, 0x198, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 = IOMUX_PAD(0x4E8, 0x198, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_EB1__IPU_CSI1_D_10 = IOMUX_PAD(0x4E8, 0x198, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_EB1__SRC_BT_CFG2_6 = IOMUX_PAD(0x4E8, 0x198, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 = IOMUX_PAD(0x4EC, 0x19C, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA0__GPIO3_0 = IOMUX_PAD(0x4EC, 0x19C, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 = IOMUX_PAD(0x4EC, 0x19C, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA0__IPU_CSI1_D_9 = IOMUX_PAD(0x4EC, 0x19C, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA0__SRC_BT_CFG2_5 = IOMUX_PAD(0x4EC, 0x19C, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 = IOMUX_PAD(0x4F0, 0x1A0, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA1__GPIO3_1 = IOMUX_PAD(0x4F0, 0x1A0, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 = IOMUX_PAD(0x4F0, 0x1A0, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA1__IPU_CSI1_D_8 = IOMUX_PAD(0x4F0, 0x1A0, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA1__SRC_BT_CFG2_4 = IOMUX_PAD(0x4F0, 0x1A0, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 = IOMUX_PAD(0x4F4, 0x1A4, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA2__GPIO3_2 = IOMUX_PAD(0x4F4, 0x1A4, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 = IOMUX_PAD(0x4F4, 0x1A4, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA2__IPU_CSI1_D_7 = IOMUX_PAD(0x4F4, 0x1A4, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA2__SRC_BT_CFG2_3 = IOMUX_PAD(0x4F4, 0x1A4, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 = IOMUX_PAD(0x4F8, 0x1A8, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA3__GPIO3_3 = IOMUX_PAD(0x4F8, 0x1A8, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 = IOMUX_PAD(0x4F8, 0x1A8, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA3__IPU_CSI1_D_6 = IOMUX_PAD(0x4F8, 0x1A8, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA3__SRC_BT_CFG2_2 = IOMUX_PAD(0x4F8, 0x1A8, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 = IOMUX_PAD(0x4FC, 0x1AC, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA4__GPIO3_4 = IOMUX_PAD(0x4FC, 0x1AC, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 = IOMUX_PAD(0x4FC, 0x1AC, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA4__IPU_CSI1_D_5 = IOMUX_PAD(0x4FC, 0x1AC, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA4__SRC_BT_CFG3_7 = IOMUX_PAD(0x4FC, 0x1AC, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 = IOMUX_PAD(0x500, 0x1B0, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA5__GPIO3_5 = IOMUX_PAD(0x500, 0x1B0, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 = IOMUX_PAD(0x500, 0x1B0, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA5__IPU_CSI1_D_4 = IOMUX_PAD(0x500, 0x1B0, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA5__SRC_BT_CFG3_6 = IOMUX_PAD(0x500, 0x1B0, 7 | IOMUX_CONFIG_SION, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 = IOMUX_PAD(0x504, 0x1B4, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA6__GPIO3_6 = IOMUX_PAD(0x504, 0x1B4, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 = IOMUX_PAD(0x504, 0x1B4, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA6__IPU_CSI1_D_3 = IOMUX_PAD(0x504, 0x1B4, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA6__SRC_BT_CFG3_5 = IOMUX_PAD(0x504, 0x1B4, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7 = IOMUX_PAD(0x508, 0x1B8, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA7__GPIO3_7 = IOMUX_PAD(0x508, 0x1B8, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 = IOMUX_PAD(0x508, 0x1B8, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA7__IPU_CSI1_D_2 = IOMUX_PAD(0x508, 0x1B8, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA7__SRC_BT_CFG3_4 = IOMUX_PAD(0x508, 0x1B8, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA8__EMI_NAND_WEIM_DA_8 = IOMUX_PAD(0x50C, 0x1BC, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA8__GPIO3_8 = IOMUX_PAD(0x50C, 0x1BC, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 = IOMUX_PAD(0x50C, 0x1BC, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA8__IPU_CSI1_D_1 = IOMUX_PAD(0x50C, 0x1BC, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA8__SRC_BT_CFG3_3 = IOMUX_PAD(0x50C, 0x1BC, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA9__EMI_NAND_WEIM_DA_9 = IOMUX_PAD(0x510, 0x1C0, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA9__GPIO3_9 = IOMUX_PAD(0x510, 0x1C0, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 = IOMUX_PAD(0x510, 0x1C0, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA9__IPU_CSI1_D_0 = IOMUX_PAD(0x510, 0x1C0, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA9__SRC_BT_CFG3_2 = IOMUX_PAD(0x510, 0x1C0, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA10__EMI_NAND_WEIM_DA_10 = IOMUX_PAD(0x514, 0x1C4, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA10__GPIO3_10 = IOMUX_PAD(0x514, 0x1C4, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA10__IPU_DI1_PIN15 = IOMUX_PAD(0x514, 0x1C4, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA10__IPU_CSI1_DATA_EN = IOMUX_PAD(0x514, 0x1C4, 4, 0x834, 1, NO_PAD_CTRL), + MX53_PAD_EIM_DA10__SRC_BT_CFG3_1 = IOMUX_PAD(0x514, 0x1C4, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA11__EMI_NAND_WEIM_DA_11 = IOMUX_PAD(0x518, 0x1C8, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA11__GPIO3_11 = IOMUX_PAD(0x518, 0x1C8, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA11__IPU_DI1_PIN2 = IOMUX_PAD(0x518, 0x1C8, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA11__IPU_CSI1_HSYNC = IOMUX_PAD(0x518, 0x1C8, 4, 0x838, 1, NO_PAD_CTRL), + MX53_PAD_EIM_DA12__EMI_NAND_WEIM_DA_12 = IOMUX_PAD(0x51C, 0x1CC, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA12__GPIO3_12 = IOMUX_PAD(0x51C, 0x1CC, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA12__IPU_DI1_PIN3 = IOMUX_PAD(0x51C, 0x1CC, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA12__IPU_CSI1_VSYNC = IOMUX_PAD(0x51C, 0x1CC, 4, 0x83C, 1, NO_PAD_CTRL), + MX53_PAD_EIM_DA13__EMI_NAND_WEIM_DA_13 = IOMUX_PAD(0x520, 0x1D0, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA13__GPIO3_13 = IOMUX_PAD(0x520, 0x1D0, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA13__IPU_DI1_D0_CS = IOMUX_PAD(0x520, 0x1D0, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA13__CCM_DI1_EXT_CLK = IOMUX_PAD(0x520, 0x1D0, 4, 0x76C, 1, NO_PAD_CTRL), + MX53_PAD_EIM_DA14__EMI_NAND_WEIM_DA_14 = IOMUX_PAD(0x524, 0x1D4, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA14__GPIO3_14 = IOMUX_PAD(0x524, 0x1D4, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA14__IPU_DI1_D1_CS = IOMUX_PAD(0x524, 0x1D4, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA14__CCM_DI0_EXT_CLK = IOMUX_PAD(0x524, 0x1D4, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA15__EMI_NAND_WEIM_DA_15 = IOMUX_PAD(0x528, 0x1D8, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA15__GPIO3_15 = IOMUX_PAD(0x528, 0x1D8, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA15__IPU_DI1_PIN1 = IOMUX_PAD(0x528, 0x1D8, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_DA15__IPU_DI1_PIN4 = IOMUX_PAD(0x528, 0x1D8, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B = IOMUX_PAD(0x52C, 0x1DC, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_NANDF_WE_B__GPIO6_12 = IOMUX_PAD(0x52C, 0x1DC, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B = IOMUX_PAD(0x530, 0x1E0, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_NANDF_RE_B__GPIO6_13 = IOMUX_PAD(0x530, 0x1E0, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_WAIT__EMI_WEIM_WAIT = IOMUX_PAD(0x534, 0x1E4, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_WAIT__GPIO5_0 = IOMUX_PAD(0x534, 0x1E4, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_EIM_WAIT__EMI_WEIM_DTACK_B = IOMUX_PAD(0x534, 0x1E4, 2, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_LVDS1_TX3_P__GPIO6_22 = IOMUX_PAD(__NA_, 0x1EC, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 = IOMUX_PAD(__NA_, 0x1EC, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_LVDS1_TX2_P__GPIO6_24 = IOMUX_PAD(__NA_, 0x1F0, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 = IOMUX_PAD(__NA_, 0x1F0, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_LVDS1_CLK_P__GPIO6_26 = IOMUX_PAD(__NA_, 0x1F4, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK = IOMUX_PAD(__NA_, 0x1F4, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_LVDS1_TX1_P__GPIO6_28 = IOMUX_PAD(__NA_, 0x1F8, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 = IOMUX_PAD(__NA_, 0x1F8, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_LVDS1_TX0_P__GPIO6_30 = IOMUX_PAD(__NA_, 0x1FC, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 = IOMUX_PAD(__NA_, 0x1FC, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_LVDS0_TX3_P__GPIO7_22 = IOMUX_PAD(__NA_, 0x200, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 = IOMUX_PAD(__NA_, 0x200, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_LVDS0_CLK_P__GPIO7_24 = IOMUX_PAD(__NA_, 0x204, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK = IOMUX_PAD(__NA_, 0x204, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_LVDS0_TX2_P__GPIO7_26 = IOMUX_PAD(__NA_, 0x208, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 = IOMUX_PAD(__NA_, 0x208, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_LVDS0_TX1_P__GPIO7_28 = IOMUX_PAD(__NA_, 0x20C, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 = IOMUX_PAD(__NA_, 0x20C, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_LVDS0_TX0_P__GPIO7_30 = IOMUX_PAD(__NA_, 0x210, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 = IOMUX_PAD(__NA_, 0x210, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_10__GPIO4_0 = IOMUX_PAD(0x540, 0x214, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_10__OSC32k_32K_OUT = IOMUX_PAD(0x540, 0x214, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_11__GPIO4_1 = IOMUX_PAD(0x544, 0x218, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_12__GPIO4_2 = IOMUX_PAD(0x548, 0x21C, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_13__GPIO4_3 = IOMUX_PAD(0x54C, 0x220, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_14__GPIO4_4 = IOMUX_PAD(0x550, 0x224, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_NANDF_CLE__EMI_NANDF_CLE = IOMUX_PAD(0x5A0, 0x228, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_NANDF_CLE__GPIO6_7 = IOMUX_PAD(0x5A0, 0x228, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_NANDF_CLE__USBPHY1_VSTATUS_0 = IOMUX_PAD(0x5A0, 0x228, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_NANDF_ALE__EMI_NANDF_ALE = IOMUX_PAD(0x5A4, 0x22C, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_NANDF_ALE__GPIO6_8 = IOMUX_PAD(0x5A4, 0x22C, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_NANDF_ALE__USBPHY1_VSTATUS_1 = IOMUX_PAD(0x5A4, 0x22C, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B = IOMUX_PAD(0x5A8, 0x230, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_NANDF_WP_B__GPIO6_9 = IOMUX_PAD(0x5A8, 0x230, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_NANDF_WP_B__USBPHY1_VSTATUS_2 = IOMUX_PAD(0x5A8, 0x230, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 = IOMUX_PAD(0x5AC, 0x234, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_NANDF_RB0__GPIO6_10 = IOMUX_PAD(0x5AC, 0x234, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_NANDF_RB0__USBPHY1_VSTATUS_3 = IOMUX_PAD(0x5AC, 0x234, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 = IOMUX_PAD(0x5B0, 0x238, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_NANDF_CS0__GPIO6_11 = IOMUX_PAD(0x5B0, 0x238, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_NANDF_CS0__USBPHY1_VSTATUS_4 = IOMUX_PAD(0x5B0, 0x238, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1 = IOMUX_PAD(0x5B4, 0x23C, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_NANDF_CS1__GPIO6_14 = IOMUX_PAD(0x5B4, 0x23C, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_NANDF_CS1__MLB_MLBCLK = IOMUX_PAD(0x5B4, 0x23C, 6, 0x858, 0, NO_PAD_CTRL), + MX53_PAD_NANDF_CS1__USBPHY1_VSTATUS_5 = IOMUX_PAD(0x5B4, 0x23C, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2 = IOMUX_PAD(0x5B8, 0x240, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_NANDF_CS2__GPIO6_15 = IOMUX_PAD(0x5B8, 0x240, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_NANDF_CS2__IPU_SISG_0 = IOMUX_PAD(0x5B8, 0x240, 2, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_NANDF_CS2__ESAI1_TX0 = IOMUX_PAD(0x5B8, 0x240, 3, 0x7E4, 0, NO_PAD_CTRL), + MX53_PAD_NANDF_CS2__EMI_WEIM_CRE = IOMUX_PAD(0x5B8, 0x240, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_NANDF_CS2__CCM_CSI0_MCLK = IOMUX_PAD(0x5B8, 0x240, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_NANDF_CS2__MLB_MLBSIG = IOMUX_PAD(0x5B8, 0x240, 6, 0x860, 0, NO_PAD_CTRL), + MX53_PAD_NANDF_CS2__USBPHY1_VSTATUS_6 = IOMUX_PAD(0x5B8, 0x240, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3 = IOMUX_PAD(0x5BC, 0x244, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_NANDF_CS3__GPIO6_16 = IOMUX_PAD(0x5BC, 0x244, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_NANDF_CS3__IPU_SISG_1 = IOMUX_PAD(0x5BC, 0x244, 2, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_NANDF_CS3__ESAI1_TX1 = IOMUX_PAD(0x5BC, 0x244, 3, 0x7E8, 0, NO_PAD_CTRL), + MX53_PAD_NANDF_CS3__EMI_WEIM_A_26 = IOMUX_PAD(0x5BC, 0x244, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_NANDF_CS3__MLB_MLBDAT = IOMUX_PAD(0x5BC, 0x244, 6, 0x85C, 0, NO_PAD_CTRL), + MX53_PAD_NANDF_CS3__USBPHY1_VSTATUS_7 = IOMUX_PAD(0x5BC, 0x244, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_FEC_MDIO__FEC_MDIO = IOMUX_PAD(0x5C4, 0x248, 0, 0x804, 1, NO_PAD_CTRL), + MX53_PAD_FEC_MDIO__GPIO1_22 = IOMUX_PAD(0x5C4, 0x248, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_FEC_MDIO__ESAI1_SCKR = IOMUX_PAD(0x5C4, 0x248, 2, 0x7DC, 0, NO_PAD_CTRL), + MX53_PAD_FEC_MDIO__FEC_COL = IOMUX_PAD(0x5C4, 0x248, 3, 0x800, 1, NO_PAD_CTRL), + MX53_PAD_FEC_MDIO__RTC_CE_RTC_PS2 = IOMUX_PAD(0x5C4, 0x248, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_FEC_MDIO__SDMA_DEBUG_BUS_DEVICE_3 = IOMUX_PAD(0x5C4, 0x248, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_FEC_MDIO__EMI_EMI_DEBUG_49 = IOMUX_PAD(0x5C4, 0x248, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_FEC_REF_CLK__FEC_TX_CLK = IOMUX_PAD(0x5C8, 0x24C, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_FEC_REF_CLK__GPIO1_23 = IOMUX_PAD(0x5C8, 0x24C, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_FEC_REF_CLK__ESAI1_FSR = IOMUX_PAD(0x5C8, 0x24C, 2, 0x7CC, 0, NO_PAD_CTRL), + MX53_PAD_FEC_REF_CLK__SDMA_DEBUG_BUS_DEVICE_4 = IOMUX_PAD(0x5C8, 0x24C, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_FEC_REF_CLK__EMI_EMI_DEBUG_50 = IOMUX_PAD(0x5C8, 0x24C, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_FEC_RX_ER__FEC_RX_ER = IOMUX_PAD(0x5CC, 0x250, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_FEC_RX_ER__GPIO1_24 = IOMUX_PAD(0x5CC, 0x250, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_FEC_RX_ER__ESAI1_HCKR = IOMUX_PAD(0x5CC, 0x250, 2, 0x7D4, 0, NO_PAD_CTRL), + MX53_PAD_FEC_RX_ER__FEC_RX_CLK = IOMUX_PAD(0x5CC, 0x250, 3, 0x808, 1, NO_PAD_CTRL), + MX53_PAD_FEC_RX_ER__RTC_CE_RTC_PS3 = IOMUX_PAD(0x5CC, 0x250, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_FEC_CRS_DV__FEC_RX_DV = IOMUX_PAD(0x5D0, 0x254, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_FEC_CRS_DV__GPIO1_25 = IOMUX_PAD(0x5D0, 0x254, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_FEC_CRS_DV__ESAI1_SCKT = IOMUX_PAD(0x5D0, 0x254, 2, 0x7E0, 0, NO_PAD_CTRL), + MX53_PAD_FEC_RXD1__FEC_RDATA_1 = IOMUX_PAD(0x5D4, 0x258, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_FEC_RXD1__GPIO1_26 = IOMUX_PAD(0x5D4, 0x258, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_FEC_RXD1__ESAI1_FST = IOMUX_PAD(0x5D4, 0x258, 2, 0x7D0, 0, NO_PAD_CTRL), + MX53_PAD_FEC_RXD1__MLB_MLBSIG = IOMUX_PAD(0x5D4, 0x258, 3, 0x860, 1, NO_PAD_CTRL), + MX53_PAD_FEC_RXD1__RTC_CE_RTC_PS1 = IOMUX_PAD(0x5D4, 0x258, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_FEC_RXD0__FEC_RDATA_0 = IOMUX_PAD(0x5D8, 0x25C, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_FEC_RXD0__GPIO1_27 = IOMUX_PAD(0x5D8, 0x25C, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_FEC_RXD0__ESAI1_HCKT = IOMUX_PAD(0x5D8, 0x25C, 2, 0x7D8, 0, NO_PAD_CTRL), + MX53_PAD_FEC_RXD0__OSC32k_32K_OUT = IOMUX_PAD(0x5D8, 0x25C, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_FEC_TX_EN__FEC_TX_EN = IOMUX_PAD(0x5DC, 0x260, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_FEC_TX_EN__GPIO1_28 = IOMUX_PAD(0x5DC, 0x260, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_FEC_TX_EN__ESAI1_TX3_RX2 = IOMUX_PAD(0x5DC, 0x260, 2, 0x7F0, 0, NO_PAD_CTRL), + MX53_PAD_FEC_TXD1__FEC_TDATA_1 = IOMUX_PAD(0x5E0, 0x264, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_FEC_TXD1__GPIO1_29 = IOMUX_PAD(0x5E0, 0x264, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_FEC_TXD1__ESAI1_TX2_RX3 = IOMUX_PAD(0x5E0, 0x264, 2, 0x7EC, 0, NO_PAD_CTRL), + MX53_PAD_FEC_TXD1__MLB_MLBCLK = IOMUX_PAD(0x5E0, 0x264, 3, 0x858, 1, NO_PAD_CTRL), + MX53_PAD_FEC_TXD1__RTC_CE_RTC_PRSC_CLK = IOMUX_PAD(0x5E0, 0x264, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_FEC_TXD0__FEC_TDATA_0 = IOMUX_PAD(0x5E4, 0x268, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_FEC_TXD0__GPIO1_30 = IOMUX_PAD(0x5E4, 0x268, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_FEC_TXD0__ESAI1_TX4_RX1 = IOMUX_PAD(0x5E4, 0x268, 2, 0x7F4, 0, NO_PAD_CTRL), + MX53_PAD_FEC_TXD0__USBPHY2_DATAOUT_0 = IOMUX_PAD(0x5E4, 0x268, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_FEC_MDC__FEC_MDC = IOMUX_PAD(0x5E8, 0x26C, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_FEC_MDC__GPIO1_31 = IOMUX_PAD(0x5E8, 0x26C, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_FEC_MDC__ESAI1_TX5_RX0 = IOMUX_PAD(0x5E8, 0x26C, 2, 0x7F8, 0, NO_PAD_CTRL), + MX53_PAD_FEC_MDC__MLB_MLBDAT = IOMUX_PAD(0x5E8, 0x26C, 3, 0x85C, 1, NO_PAD_CTRL), + MX53_PAD_FEC_MDC__RTC_CE_RTC_ALARM1_TRIG = IOMUX_PAD(0x5E8, 0x26C, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_FEC_MDC__USBPHY2_DATAOUT_1 = IOMUX_PAD(0x5E8, 0x26C, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DIOW__PATA_DIOW = IOMUX_PAD(0x5F0, 0x270, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DIOW__GPIO6_17 = IOMUX_PAD(0x5F0, 0x270, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DIOW__UART1_TXD_MUX = IOMUX_PAD(0x5F0, 0x270, 3, __NA_, 0, MX53_UART_PAD_CTRL), + MX53_PAD_PATA_DIOW__USBPHY2_DATAOUT_2 = IOMUX_PAD(0x5F0, 0x270, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DMACK__PATA_DMACK = IOMUX_PAD(0x5F4, 0x274, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DMACK__GPIO6_18 = IOMUX_PAD(0x5F4, 0x274, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DMACK__UART1_RXD_MUX = IOMUX_PAD(0x5F4, 0x274, 3, 0x878, 3, MX53_UART_PAD_CTRL), + MX53_PAD_PATA_DMACK__USBPHY2_DATAOUT_3 = IOMUX_PAD(0x5F4, 0x274, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DMARQ__PATA_DMARQ = IOMUX_PAD(0x5F8, 0x278, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DMARQ__GPIO7_0 = IOMUX_PAD(0x5F8, 0x278, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DMARQ__UART2_TXD_MUX = IOMUX_PAD(0x5F8, 0x278, 3, __NA_, 0, MX53_UART_PAD_CTRL), + MX53_PAD_PATA_DMARQ__CCM_CCM_OUT_0 = IOMUX_PAD(0x5F8, 0x278, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DMARQ__USBPHY2_DATAOUT_4 = IOMUX_PAD(0x5F8, 0x278, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_BUFFER_EN__PATA_BUFFER_EN = IOMUX_PAD(0x5FC, 0x27C, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_BUFFER_EN__GPIO7_1 = IOMUX_PAD(0x5FC, 0x27C, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX = IOMUX_PAD(0x5FC, 0x27C, 3, 0x880, 3, MX53_UART_PAD_CTRL), + MX53_PAD_PATA_BUFFER_EN__CCM_CCM_OUT_1 = IOMUX_PAD(0x5FC, 0x27C, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_BUFFER_EN__USBPHY2_DATAOUT_5 = IOMUX_PAD(0x5FC, 0x27C, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_INTRQ__PATA_INTRQ = IOMUX_PAD(0x600, 0x280, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_INTRQ__GPIO7_2 = IOMUX_PAD(0x600, 0x280, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_INTRQ__UART2_CTS = IOMUX_PAD(0x600, 0x280, 3, __NA_, 0, MX53_UART_PAD_CTRL), + MX53_PAD_PATA_INTRQ__CAN1_TXCAN = IOMUX_PAD(0x600, 0x280, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_INTRQ__CCM_CCM_OUT_2 = IOMUX_PAD(0x600, 0x280, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_INTRQ__USBPHY2_DATAOUT_6 = IOMUX_PAD(0x600, 0x280, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DIOR__PATA_DIOR = IOMUX_PAD(0x604, 0x284, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DIOR__GPIO7_3 = IOMUX_PAD(0x604, 0x284, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DIOR__UART2_RTS = IOMUX_PAD(0x604, 0x284, 3, 0x87C, 3, MX53_UART_PAD_CTRL), + MX53_PAD_PATA_DIOR__CAN1_RXCAN = IOMUX_PAD(0x604, 0x284, 4, 0x760, 1, NO_PAD_CTRL), + MX53_PAD_PATA_DIOR__USBPHY2_DATAOUT_7 = IOMUX_PAD(0x604, 0x284, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B = IOMUX_PAD(0x608, 0x288, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_RESET_B__GPIO7_4 = IOMUX_PAD(0x608, 0x288, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_RESET_B__ESDHC3_CMD = IOMUX_PAD(0x608, 0x288, 2, __NA_, 0, MX53_SDHC_PAD_CTRL), + MX53_PAD_PATA_RESET_B__UART1_CTS = IOMUX_PAD(0x608, 0x288, 3, __NA_, 0, MX53_UART_PAD_CTRL), + MX53_PAD_PATA_RESET_B__CAN2_TXCAN = IOMUX_PAD(0x608, 0x288, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0 = IOMUX_PAD(0x608, 0x288, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_IORDY__PATA_IORDY = IOMUX_PAD(0x60C, 0x28C, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_IORDY__GPIO7_5 = IOMUX_PAD(0x60C, 0x28C, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_IORDY__ESDHC3_CLK = IOMUX_PAD(0x60C, 0x28C, 2, __NA_, 0, MX53_SDHC_PAD_CTRL), + MX53_PAD_PATA_IORDY__UART1_RTS = IOMUX_PAD(0x60C, 0x28C, 3, 0x874, 3, MX53_UART_PAD_CTRL), + MX53_PAD_PATA_IORDY__CAN2_RXCAN = IOMUX_PAD(0x60C, 0x28C, 4, 0x764, 1, NO_PAD_CTRL), + MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1 = IOMUX_PAD(0x60C, 0x28C, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DA_0__PATA_DA_0 = IOMUX_PAD(0x610, 0x290, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DA_0__GPIO7_6 = IOMUX_PAD(0x610, 0x290, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DA_0__ESDHC3_RST = IOMUX_PAD(0x610, 0x290, 2, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DA_0__OWIRE_LINE = IOMUX_PAD(0x610, 0x290, 4, 0x864, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DA_0__USBPHY1_DATAOUT_2 = IOMUX_PAD(0x610, 0x290, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DA_1__PATA_DA_1 = IOMUX_PAD(0x614, 0x294, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DA_1__GPIO7_7 = IOMUX_PAD(0x614, 0x294, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DA_1__ESDHC4_CMD = IOMUX_PAD(0x614, 0x294, 2, __NA_, 0, MX53_SDHC_PAD_CTRL), + MX53_PAD_PATA_DA_1__UART3_CTS = IOMUX_PAD(0x614, 0x294, 4, __NA_, 0, MX53_UART_PAD_CTRL), + MX53_PAD_PATA_DA_1__USBPHY1_DATAOUT_3 = IOMUX_PAD(0x614, 0x294, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DA_2__PATA_DA_2 = IOMUX_PAD(0x618, 0x298, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DA_2__GPIO7_8 = IOMUX_PAD(0x618, 0x298, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DA_2__ESDHC4_CLK = IOMUX_PAD(0x618, 0x298, 2, __NA_, 0, MX53_SDHC_PAD_CTRL), + MX53_PAD_PATA_DA_2__UART3_RTS = IOMUX_PAD(0x618, 0x298, 4, 0x884, 5, MX53_UART_PAD_CTRL), + MX53_PAD_PATA_DA_2__USBPHY1_DATAOUT_4 = IOMUX_PAD(0x618, 0x298, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_CS_0__PATA_CS_0 = IOMUX_PAD(0x61C, 0x29C, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_CS_0__GPIO7_9 = IOMUX_PAD(0x61C, 0x29C, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_CS_0__UART3_TXD_MUX = IOMUX_PAD(0x61C, 0x29C, 4, __NA_, 0, MX53_UART_PAD_CTRL), + MX53_PAD_PATA_CS_0__USBPHY1_DATAOUT_5 = IOMUX_PAD(0x61C, 0x29C, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_CS_1__PATA_CS_1 = IOMUX_PAD(0x620, 0x2A0, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_CS_1__GPIO7_10 = IOMUX_PAD(0x620, 0x2A0, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_CS_1__UART3_RXD_MUX = IOMUX_PAD(0x620, 0x2A0, 4, 0x888, 3, MX53_UART_PAD_CTRL), + MX53_PAD_PATA_CS_1__USBPHY1_DATAOUT_6 = IOMUX_PAD(0x620, 0x2A0, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA0__PATA_DATA_0 = IOMUX_PAD(0x628, 0x2A4, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA0__GPIO2_0 = IOMUX_PAD(0x628, 0x2A4, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 = IOMUX_PAD(0x628, 0x2A4, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA0__ESDHC3_DAT4 = IOMUX_PAD(0x628, 0x2A4, 4, __NA_, 0, MX53_SDHC_PAD_CTRL), + MX53_PAD_PATA_DATA0__GPU3d_GPU_DEBUG_OUT_0 = IOMUX_PAD(0x628, 0x2A4, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA0__IPU_DIAG_BUS_0 = IOMUX_PAD(0x628, 0x2A4, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA0__USBPHY1_DATAOUT_7 = IOMUX_PAD(0x628, 0x2A4, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA1__PATA_DATA_1 = IOMUX_PAD(0x62C, 0x2A8, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA1__GPIO2_1 = IOMUX_PAD(0x62C, 0x2A8, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 = IOMUX_PAD(0x62C, 0x2A8, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA1__ESDHC3_DAT5 = IOMUX_PAD(0x62C, 0x2A8, 4, __NA_, 0, MX53_SDHC_PAD_CTRL), + MX53_PAD_PATA_DATA1__GPU3d_GPU_DEBUG_OUT_1 = IOMUX_PAD(0x62C, 0x2A8, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA1__IPU_DIAG_BUS_1 = IOMUX_PAD(0x62C, 0x2A8, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA2__PATA_DATA_2 = IOMUX_PAD(0x630, 0x2AC, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA2__GPIO2_2 = IOMUX_PAD(0x630, 0x2AC, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 = IOMUX_PAD(0x630, 0x2AC, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA2__ESDHC3_DAT6 = IOMUX_PAD(0x630, 0x2AC, 4, __NA_, 0, MX53_SDHC_PAD_CTRL), + MX53_PAD_PATA_DATA2__GPU3d_GPU_DEBUG_OUT_2 = IOMUX_PAD(0x630, 0x2AC, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA2__IPU_DIAG_BUS_2 = IOMUX_PAD(0x630, 0x2AC, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA3__PATA_DATA_3 = IOMUX_PAD(0x634, 0x2B0, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA3__GPIO2_3 = IOMUX_PAD(0x634, 0x2B0, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 = IOMUX_PAD(0x634, 0x2B0, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA3__ESDHC3_DAT7 = IOMUX_PAD(0x634, 0x2B0, 4, __NA_, 0, MX53_SDHC_PAD_CTRL), + MX53_PAD_PATA_DATA3__GPU3d_GPU_DEBUG_OUT_3 = IOMUX_PAD(0x634, 0x2B0, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA3__IPU_DIAG_BUS_3 = IOMUX_PAD(0x634, 0x2B0, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA4__PATA_DATA_4 = IOMUX_PAD(0x638, 0x2B4, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA4__GPIO2_4 = IOMUX_PAD(0x638, 0x2B4, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 = IOMUX_PAD(0x638, 0x2B4, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA4__ESDHC4_DAT4 = IOMUX_PAD(0x638, 0x2B4, 4, __NA_, 0, MX53_SDHC_PAD_CTRL), + MX53_PAD_PATA_DATA4__GPU3d_GPU_DEBUG_OUT_4 = IOMUX_PAD(0x638, 0x2B4, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA4__IPU_DIAG_BUS_4 = IOMUX_PAD(0x638, 0x2B4, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA5__PATA_DATA_5 = IOMUX_PAD(0x63C, 0x2B8, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA5__GPIO2_5 = IOMUX_PAD(0x63C, 0x2B8, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 = IOMUX_PAD(0x63C, 0x2B8, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA5__ESDHC4_DAT5 = IOMUX_PAD(0x63C, 0x2B8, 4, __NA_, 0, MX53_SDHC_PAD_CTRL), + MX53_PAD_PATA_DATA5__GPU3d_GPU_DEBUG_OUT_5 = IOMUX_PAD(0x63C, 0x2B8, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA5__IPU_DIAG_BUS_5 = IOMUX_PAD(0x63C, 0x2B8, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA6__PATA_DATA_6 = IOMUX_PAD(0x640, 0x2BC, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA6__GPIO2_6 = IOMUX_PAD(0x640, 0x2BC, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 = IOMUX_PAD(0x640, 0x2BC, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA6__ESDHC4_DAT6 = IOMUX_PAD(0x640, 0x2BC, 4, __NA_, 0, MX53_SDHC_PAD_CTRL), + MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6 = IOMUX_PAD(0x640, 0x2BC, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6 = IOMUX_PAD(0x640, 0x2BC, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA7__PATA_DATA_7 = IOMUX_PAD(0x644, 0x2C0, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA7__GPIO2_7 = IOMUX_PAD(0x644, 0x2C0, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 = IOMUX_PAD(0x644, 0x2C0, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA7__ESDHC4_DAT7 = IOMUX_PAD(0x644, 0x2C0, 4, __NA_, 0, MX53_SDHC_PAD_CTRL), + MX53_PAD_PATA_DATA7__GPU3d_GPU_DEBUG_OUT_7 = IOMUX_PAD(0x644, 0x2C0, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA7__IPU_DIAG_BUS_7 = IOMUX_PAD(0x644, 0x2C0, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA8__PATA_DATA_8 = IOMUX_PAD(0x648, 0x2C4, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA8__GPIO2_8 = IOMUX_PAD(0x648, 0x2C4, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA8__ESDHC1_DAT4 = IOMUX_PAD(0x648, 0x2C4, 2, __NA_, 0, MX53_SDHC_PAD_CTRL), + MX53_PAD_PATA_DATA8__EMI_NANDF_D_8 = IOMUX_PAD(0x648, 0x2C4, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA8__ESDHC3_DAT0 = IOMUX_PAD(0x648, 0x2C4, 4, __NA_, 0, MX53_SDHC_PAD_CTRL), + MX53_PAD_PATA_DATA8__GPU3d_GPU_DEBUG_OUT_8 = IOMUX_PAD(0x648, 0x2C4, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA8__IPU_DIAG_BUS_8 = IOMUX_PAD(0x648, 0x2C4, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA9__PATA_DATA_9 = IOMUX_PAD(0x64C, 0x2C8, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA9__GPIO2_9 = IOMUX_PAD(0x64C, 0x2C8, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA9__ESDHC1_DAT5 = IOMUX_PAD(0x64C, 0x2C8, 2, __NA_, 0, MX53_SDHC_PAD_CTRL), + MX53_PAD_PATA_DATA9__EMI_NANDF_D_9 = IOMUX_PAD(0x64C, 0x2C8, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA9__ESDHC3_DAT1 = IOMUX_PAD(0x64C, 0x2C8, 4, __NA_, 0, MX53_SDHC_PAD_CTRL), + MX53_PAD_PATA_DATA9__GPU3d_GPU_DEBUG_OUT_9 = IOMUX_PAD(0x64C, 0x2C8, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA9__IPU_DIAG_BUS_9 = IOMUX_PAD(0x64C, 0x2C8, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA10__PATA_DATA_10 = IOMUX_PAD(0x650, 0x2CC, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA10__GPIO2_10 = IOMUX_PAD(0x650, 0x2CC, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA10__ESDHC1_DAT6 = IOMUX_PAD(0x650, 0x2CC, 2, __NA_, 0, MX53_SDHC_PAD_CTRL), + MX53_PAD_PATA_DATA10__EMI_NANDF_D_10 = IOMUX_PAD(0x650, 0x2CC, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA10__ESDHC3_DAT2 = IOMUX_PAD(0x650, 0x2CC, 4, __NA_, 0, MX53_SDHC_PAD_CTRL), + MX53_PAD_PATA_DATA10__GPU3d_GPU_DEBUG_OUT_10 = IOMUX_PAD(0x650, 0x2CC, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA10__IPU_DIAG_BUS_10 = IOMUX_PAD(0x650, 0x2CC, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA11__PATA_DATA_11 = IOMUX_PAD(0x654, 0x2D0, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA11__GPIO2_11 = IOMUX_PAD(0x654, 0x2D0, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA11__ESDHC1_DAT7 = IOMUX_PAD(0x654, 0x2D0, 2, __NA_, 0, MX53_SDHC_PAD_CTRL), + MX53_PAD_PATA_DATA11__EMI_NANDF_D_11 = IOMUX_PAD(0x654, 0x2D0, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA11__ESDHC3_DAT3 = IOMUX_PAD(0x654, 0x2D0, 4, __NA_, 0, MX53_SDHC_PAD_CTRL), + MX53_PAD_PATA_DATA11__GPU3d_GPU_DEBUG_OUT_11 = IOMUX_PAD(0x654, 0x2D0, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA11__IPU_DIAG_BUS_11 = IOMUX_PAD(0x654, 0x2D0, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA12__PATA_DATA_12 = IOMUX_PAD(0x658, 0x2D4, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA12__GPIO2_12 = IOMUX_PAD(0x658, 0x2D4, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA12__ESDHC2_DAT4 = IOMUX_PAD(0x658, 0x2D4, 2, __NA_, 0, MX53_SDHC_PAD_CTRL), + MX53_PAD_PATA_DATA12__EMI_NANDF_D_12 = IOMUX_PAD(0x658, 0x2D4, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA12__ESDHC4_DAT0 = IOMUX_PAD(0x658, 0x2D4, 4, __NA_, 0, MX53_SDHC_PAD_CTRL), + MX53_PAD_PATA_DATA12__GPU3d_GPU_DEBUG_OUT_12 = IOMUX_PAD(0x658, 0x2D4, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA12__IPU_DIAG_BUS_12 = IOMUX_PAD(0x658, 0x2D4, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA13__PATA_DATA_13 = IOMUX_PAD(0x65C, 0x2D8, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA13__GPIO2_13 = IOMUX_PAD(0x65C, 0x2D8, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA13__ESDHC2_DAT5 = IOMUX_PAD(0x65C, 0x2D8, 2, __NA_, 0, MX53_SDHC_PAD_CTRL), + MX53_PAD_PATA_DATA13__EMI_NANDF_D_13 = IOMUX_PAD(0x65C, 0x2D8, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA13__ESDHC4_DAT1 = IOMUX_PAD(0x65C, 0x2D8, 4, __NA_, 0, MX53_SDHC_PAD_CTRL), + MX53_PAD_PATA_DATA13__GPU3d_GPU_DEBUG_OUT_13 = IOMUX_PAD(0x65C, 0x2D8, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA13__IPU_DIAG_BUS_13 = IOMUX_PAD(0x65C, 0x2D8, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA14__PATA_DATA_14 = IOMUX_PAD(0x660, 0x2DC, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA14__GPIO2_14 = IOMUX_PAD(0x660, 0x2DC, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA14__ESDHC2_DAT6 = IOMUX_PAD(0x660, 0x2DC, 2, __NA_, 0, MX53_SDHC_PAD_CTRL), + MX53_PAD_PATA_DATA14__EMI_NANDF_D_14 = IOMUX_PAD(0x660, 0x2DC, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA14__ESDHC4_DAT2 = IOMUX_PAD(0x660, 0x2DC, 4, __NA_, 0, MX53_SDHC_PAD_CTRL), + MX53_PAD_PATA_DATA14__GPU3d_GPU_DEBUG_OUT_14 = IOMUX_PAD(0x660, 0x2DC, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA14__IPU_DIAG_BUS_14 = IOMUX_PAD(0x660, 0x2DC, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA15__PATA_DATA_15 = IOMUX_PAD(0x664, 0x2E0, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA15__GPIO2_15 = IOMUX_PAD(0x664, 0x2E0, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA15__ESDHC2_DAT7 = IOMUX_PAD(0x664, 0x2E0, 2, __NA_, 0, MX53_SDHC_PAD_CTRL), + MX53_PAD_PATA_DATA15__EMI_NANDF_D_15 = IOMUX_PAD(0x664, 0x2E0, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA15__ESDHC4_DAT3 = IOMUX_PAD(0x664, 0x2E0, 4, __NA_, 0, MX53_SDHC_PAD_CTRL), + MX53_PAD_PATA_DATA15__GPU3d_GPU_DEBUG_OUT_15 = IOMUX_PAD(0x664, 0x2E0, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_PATA_DATA15__IPU_DIAG_BUS_15 = IOMUX_PAD(0x664, 0x2E0, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_SD1_DATA0__ESDHC1_DAT0 = IOMUX_PAD(0x66C, 0x2E4, 0, __NA_, 0, MX53_SDHC_PAD_CTRL), + MX53_PAD_SD1_DATA0__GPIO1_16 = IOMUX_PAD(0x66C, 0x2E4, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_SD1_DATA0__GPT_CAPIN1 = IOMUX_PAD(0x66C, 0x2E4, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_SD1_DATA0__CSPI_MISO = IOMUX_PAD(0x66C, 0x2E4, 5, 0x784, 2, NO_PAD_CTRL), + MX53_PAD_SD1_DATA0__CCM_PLL3_BYP = IOMUX_PAD(0x66C, 0x2E4, 7, 0x778, 0, NO_PAD_CTRL), + MX53_PAD_SD1_DATA1__ESDHC1_DAT1 = IOMUX_PAD(0x670, 0x2E8, 0, __NA_, 0, MX53_SDHC_PAD_CTRL), + MX53_PAD_SD1_DATA1__GPIO1_17 = IOMUX_PAD(0x670, 0x2E8, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_SD1_DATA1__GPT_CAPIN2 = IOMUX_PAD(0x670, 0x2E8, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_SD1_DATA1__CSPI_SS0 = IOMUX_PAD(0x670, 0x2E8, 5, 0x78C, 3, NO_PAD_CTRL), + MX53_PAD_SD1_DATA1__CCM_PLL4_BYP = IOMUX_PAD(0x670, 0x2E8, 7, 0x77C, 1, NO_PAD_CTRL), + MX53_PAD_SD1_CMD__ESDHC1_CMD = IOMUX_PAD(0x674, 0x2EC, 0 | IOMUX_CONFIG_SION, __NA_, 0, MX53_SDHC_PAD_CTRL), + MX53_PAD_SD1_CMD__GPIO1_18 = IOMUX_PAD(0x674, 0x2EC, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_SD1_CMD__GPT_CMPOUT1 = IOMUX_PAD(0x674, 0x2EC, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_SD1_CMD__CSPI_MOSI = IOMUX_PAD(0x674, 0x2EC, 5, 0x788, 2, NO_PAD_CTRL), + MX53_PAD_SD1_CMD__CCM_PLL1_BYP = IOMUX_PAD(0x674, 0x2EC, 7, 0x770, 0, NO_PAD_CTRL), + MX53_PAD_SD1_DATA2__ESDHC1_DAT2 = IOMUX_PAD(0x678, 0x2F0, 0, __NA_, 0, MX53_SDHC_PAD_CTRL), + MX53_PAD_SD1_DATA2__GPIO1_19 = IOMUX_PAD(0x678, 0x2F0, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_SD1_DATA2__GPT_CMPOUT2 = IOMUX_PAD(0x678, 0x2F0, 2, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_SD1_DATA2__PWM2_PWMO = IOMUX_PAD(0x678, 0x2F0, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_SD1_DATA2__WDOG1_WDOG_B = IOMUX_PAD(0x678, 0x2F0, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_SD1_DATA2__CSPI_SS1 = IOMUX_PAD(0x678, 0x2F0, 5, 0x790, 2, NO_PAD_CTRL), + MX53_PAD_SD1_DATA2__WDOG1_WDOG_RST_B_DEB = IOMUX_PAD(0x678, 0x2F0, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_SD1_DATA2__CCM_PLL2_BYP = IOMUX_PAD(0x678, 0x2F0, 7, 0x774, 0, NO_PAD_CTRL), + MX53_PAD_SD1_CLK__ESDHC1_CLK = IOMUX_PAD(0x67C, 0x2F4, 0, __NA_, 0, MX53_SDHC_PAD_CTRL), + MX53_PAD_SD1_CLK__GPIO1_20 = IOMUX_PAD(0x67C, 0x2F4, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_SD1_CLK__OSC32k_32K_OUT = IOMUX_PAD(0x67C, 0x2F4, 2, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_SD1_CLK__GPT_CLKIN = IOMUX_PAD(0x67C, 0x2F4, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_SD1_CLK__CSPI_SCLK = IOMUX_PAD(0x67C, 0x2F4, 5, 0x780, 2, NO_PAD_CTRL), + MX53_PAD_SD1_CLK__SATA_PHY_DTB_0 = IOMUX_PAD(0x67C, 0x2F4, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_SD1_DATA3__ESDHC1_DAT3 = IOMUX_PAD(0x680, 0x2F8, 0, __NA_, 0, MX53_SDHC_PAD_CTRL), + MX53_PAD_SD1_DATA3__GPIO1_21 = IOMUX_PAD(0x680, 0x2F8, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_SD1_DATA3__GPT_CMPOUT3 = IOMUX_PAD(0x680, 0x2F8, 2, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_SD1_DATA3__PWM1_PWMO = IOMUX_PAD(0x680, 0x2F8, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_SD1_DATA3__WDOG2_WDOG_B = IOMUX_PAD(0x680, 0x2F8, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_SD1_DATA3__CSPI_SS2 = IOMUX_PAD(0x680, 0x2F8, 5, 0x794, 2, NO_PAD_CTRL), + MX53_PAD_SD1_DATA3__WDOG2_WDOG_RST_B_DEB = IOMUX_PAD(0x680, 0x2F8, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_SD1_DATA3__SATA_PHY_DTB_1 = IOMUX_PAD(0x680, 0x2F8, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_SD2_CLK__ESDHC2_CLK = IOMUX_PAD(0x688, 0x2FC, 0, __NA_, 0, MX53_SDHC_PAD_CTRL), + MX53_PAD_SD2_CLK__GPIO1_10 = IOMUX_PAD(0x688, 0x2FC, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_SD2_CLK__KPP_COL_5 = IOMUX_PAD(0x688, 0x2FC, 2, 0x840, 2, NO_PAD_CTRL), + MX53_PAD_SD2_CLK__AUDMUX_AUD4_RXFS = IOMUX_PAD(0x688, 0x2FC, 3, 0x73C, 1, NO_PAD_CTRL), + MX53_PAD_SD2_CLK__CSPI_SCLK = IOMUX_PAD(0x688, 0x2FC, 5, 0x780, 3, NO_PAD_CTRL), + MX53_PAD_SD2_CLK__SCC_RANDOM_V = IOMUX_PAD(0x688, 0x2FC, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_SD2_CMD__ESDHC2_CMD = IOMUX_PAD(0x68C, 0x300, 0, __NA_, 0, MX53_SDHC_PAD_CTRL), + MX53_PAD_SD2_CMD__GPIO1_11 = IOMUX_PAD(0x68C, 0x300, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_SD2_CMD__KPP_ROW_5 = IOMUX_PAD(0x68C, 0x300, 2, 0x84C, 1, NO_PAD_CTRL), + MX53_PAD_SD2_CMD__AUDMUX_AUD4_RXC = IOMUX_PAD(0x68C, 0x300, 3, 0x738, 1, NO_PAD_CTRL), + MX53_PAD_SD2_CMD__CSPI_MOSI = IOMUX_PAD(0x68C, 0x300, 5, 0x788, 3, NO_PAD_CTRL), + MX53_PAD_SD2_CMD__SCC_RANDOM = IOMUX_PAD(0x68C, 0x300, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_SD2_DATA3__ESDHC2_DAT3 = IOMUX_PAD(0x690, 0x304, 0, __NA_, 0, MX53_SDHC_PAD_CTRL), + MX53_PAD_SD2_DATA3__GPIO1_12 = IOMUX_PAD(0x690, 0x304, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_SD2_DATA3__KPP_COL_6 = IOMUX_PAD(0x690, 0x304, 2, 0x844, 1, NO_PAD_CTRL), + MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC = IOMUX_PAD(0x690, 0x304, 3, 0x740, 1, NO_PAD_CTRL), + MX53_PAD_SD2_DATA3__CSPI_SS2 = IOMUX_PAD(0x690, 0x304, 5, 0x794, 3, NO_PAD_CTRL), + MX53_PAD_SD2_DATA3__SJC_DONE = IOMUX_PAD(0x690, 0x304, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_SD2_DATA2__ESDHC2_DAT2 = IOMUX_PAD(0x694, 0x308, 0, __NA_, 0, MX53_SDHC_PAD_CTRL), + MX53_PAD_SD2_DATA2__GPIO1_13 = IOMUX_PAD(0x694, 0x308, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_SD2_DATA2__KPP_ROW_6 = IOMUX_PAD(0x694, 0x308, 2, 0x850, 1, NO_PAD_CTRL), + MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD = IOMUX_PAD(0x694, 0x308, 3, 0x734, 1, NO_PAD_CTRL), + MX53_PAD_SD2_DATA2__CSPI_SS1 = IOMUX_PAD(0x694, 0x308, 5, 0x790, 3, NO_PAD_CTRL), + MX53_PAD_SD2_DATA2__SJC_FAIL = IOMUX_PAD(0x694, 0x308, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_SD2_DATA1__ESDHC2_DAT1 = IOMUX_PAD(0x698, 0x30C, 0, __NA_, 0, MX53_SDHC_PAD_CTRL), + MX53_PAD_SD2_DATA1__GPIO1_14 = IOMUX_PAD(0x698, 0x30C, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_SD2_DATA1__KPP_COL_7 = IOMUX_PAD(0x698, 0x30C, 2, 0x848, 1, NO_PAD_CTRL), + MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS = IOMUX_PAD(0x698, 0x30C, 3, 0x744, 0, NO_PAD_CTRL), + MX53_PAD_SD2_DATA1__CSPI_SS0 = IOMUX_PAD(0x698, 0x30C, 5, 0x78C, 4, NO_PAD_CTRL), + MX53_PAD_SD2_DATA1__RTIC_SEC_VIO = IOMUX_PAD(0x698, 0x30C, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_SD2_DATA0__ESDHC2_DAT0 = IOMUX_PAD(0x69C, 0x310, 0, __NA_, 0, MX53_SDHC_PAD_CTRL), + MX53_PAD_SD2_DATA0__GPIO1_15 = IOMUX_PAD(0x69C, 0x310, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_SD2_DATA0__KPP_ROW_7 = IOMUX_PAD(0x69C, 0x310, 2, 0x854, 1, NO_PAD_CTRL), + MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD = IOMUX_PAD(0x69C, 0x310, 3, 0x730, 1, NO_PAD_CTRL), + MX53_PAD_SD2_DATA0__CSPI_MISO = IOMUX_PAD(0x69C, 0x310, 5, 0x784, 3, NO_PAD_CTRL), + MX53_PAD_SD2_DATA0__RTIC_DONE_INT = IOMUX_PAD(0x69C, 0x310, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_0__CCM_CLKO = IOMUX_PAD(0x6A4, 0x314, 0, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_0__GPIO1_0 = IOMUX_PAD(0x6A4, 0x314, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_0__KPP_COL_5 = IOMUX_PAD(0x6A4, 0x314, 2, 0x840, 3, NO_PAD_CTRL), + MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK = IOMUX_PAD(0x6A4, 0x314, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_0__EPIT1_EPITO = IOMUX_PAD(0x6A4, 0x314, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_0__SRTC_ALARM_DEB = IOMUX_PAD(0x6A4, 0x314, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_0__USBOH3_USBH1_PWR = IOMUX_PAD(0x6A4, 0x314, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_0__CSU_TD = IOMUX_PAD(0x6A4, 0x314, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_1__ESAI1_SCKR = IOMUX_PAD(0x6A8, 0x318, 0, 0x7DC, 1, NO_PAD_CTRL), + MX53_PAD_GPIO_1__GPIO1_1 = IOMUX_PAD(0x6A8, 0x318, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_1__KPP_ROW_5 = IOMUX_PAD(0x6A8, 0x318, 2, 0x84C, 2, NO_PAD_CTRL), + MX53_PAD_GPIO_1__CCM_SSI_EXT2_CLK = IOMUX_PAD(0x6A8, 0x318, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_1__PWM2_PWMO = IOMUX_PAD(0x6A8, 0x318, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_1__WDOG2_WDOG_B = IOMUX_PAD(0x6A8, 0x318, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_1__ESDHC1_CD = IOMUX_PAD(0x6A8, 0x318, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_1__SRC_TESTER_ACK = IOMUX_PAD(0x6A8, 0x318, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_9__ESAI1_FSR = IOMUX_PAD(0x6AC, 0x31C, 0, 0x7CC, 1, NO_PAD_CTRL), + MX53_PAD_GPIO_9__GPIO1_9 = IOMUX_PAD(0x6AC, 0x31C, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_9__KPP_COL_6 = IOMUX_PAD(0x6AC, 0x31C, 2, 0x844, 2, NO_PAD_CTRL), + MX53_PAD_GPIO_9__CCM_REF_EN_B = IOMUX_PAD(0x6AC, 0x31C, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_9__PWM1_PWMO = IOMUX_PAD(0x6AC, 0x31C, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_9__WDOG1_WDOG_B = IOMUX_PAD(0x6AC, 0x31C, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_9__ESDHC1_WP = IOMUX_PAD(0x6AC, 0x31C, 6, 0x7FC, 1, NO_PAD_CTRL), + MX53_PAD_GPIO_9__SCC_FAIL_STATE = IOMUX_PAD(0x6AC, 0x31C, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_3__ESAI1_HCKR = IOMUX_PAD(0x6B0, 0x320, 0, 0x7D4, 1, NO_PAD_CTRL), + MX53_PAD_GPIO_3__GPIO1_3 = IOMUX_PAD(0x6B0, 0x320, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_3__I2C3_SCL = IOMUX_PAD(0x6B0, 0x320, 2 | IOMUX_CONFIG_SION, 0x824, 1, NO_PAD_CTRL), + MX53_PAD_GPIO_3__DPLLIP1_TOG_EN = IOMUX_PAD(0x6B0, 0x320, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_3__CCM_CLKO2 = IOMUX_PAD(0x6B0, 0x320, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0 = IOMUX_PAD(0x6B0, 0x320, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_3__USBOH3_USBH1_OC = IOMUX_PAD(0x6B0, 0x320, 6, 0x8A0, 1, NO_PAD_CTRL), + MX53_PAD_GPIO_3__MLB_MLBCLK = IOMUX_PAD(0x6B0, 0x320, 7, 0x858, 2, NO_PAD_CTRL), + MX53_PAD_GPIO_6__ESAI1_SCKT = IOMUX_PAD(0x6B4, 0x324, 0, 0x7E0, 1, NO_PAD_CTRL), + MX53_PAD_GPIO_6__GPIO1_6 = IOMUX_PAD(0x6B4, 0x324, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_6__I2C3_SDA = IOMUX_PAD(0x6B4, 0x324, 2 | IOMUX_CONFIG_SION, 0x828, 1, NO_PAD_CTRL), + MX53_PAD_GPIO_6__CCM_CCM_OUT_0 = IOMUX_PAD(0x6B4, 0x324, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_6__CSU_CSU_INT_DEB = IOMUX_PAD(0x6B4, 0x324, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1 = IOMUX_PAD(0x6B4, 0x324, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_6__ESDHC2_LCTL = IOMUX_PAD(0x6B4, 0x324, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_6__MLB_MLBSIG = IOMUX_PAD(0x6B4, 0x324, 7, 0x860, 2, NO_PAD_CTRL), + MX53_PAD_GPIO_2__ESAI1_FST = IOMUX_PAD(0x6B8, 0x328, 0, 0x7D0, 1, NO_PAD_CTRL), + MX53_PAD_GPIO_2__GPIO1_2 = IOMUX_PAD(0x6B8, 0x328, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_2__KPP_ROW_6 = IOMUX_PAD(0x6B8, 0x328, 2, 0x850, 2, NO_PAD_CTRL), + MX53_PAD_GPIO_2__CCM_CCM_OUT_1 = IOMUX_PAD(0x6B8, 0x328, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0 = IOMUX_PAD(0x6B8, 0x328, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_2__OBSERVE_MUX_OBSRV_INT_OUT2 = IOMUX_PAD(0x6B8, 0x328, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_2__ESDHC2_WP = IOMUX_PAD(0x6B8, 0x328, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_2__MLB_MLBDAT = IOMUX_PAD(0x6B8, 0x328, 7, 0x85C, 2, NO_PAD_CTRL), + MX53_PAD_GPIO_4__ESAI1_HCKT = IOMUX_PAD(0x6BC, 0x32C, 0, 0x7D8, 1, NO_PAD_CTRL), + MX53_PAD_GPIO_4__GPIO1_4 = IOMUX_PAD(0x6BC, 0x32C, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_4__KPP_COL_7 = IOMUX_PAD(0x6BC, 0x32C, 2, 0x848, 2, NO_PAD_CTRL), + MX53_PAD_GPIO_4__CCM_CCM_OUT_2 = IOMUX_PAD(0x6BC, 0x32C, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1 = IOMUX_PAD(0x6BC, 0x32C, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_4__OBSERVE_MUX_OBSRV_INT_OUT3 = IOMUX_PAD(0x6BC, 0x32C, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_4__ESDHC2_CD = IOMUX_PAD(0x6BC, 0x32C, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_4__SCC_SEC_STATE = IOMUX_PAD(0x6BC, 0x32C, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_5__ESAI1_TX2_RX3 = IOMUX_PAD(0x6C0, 0x330, 0, 0x7EC, 1, NO_PAD_CTRL), + MX53_PAD_GPIO_5__GPIO1_5 = IOMUX_PAD(0x6C0, 0x330, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_5__KPP_ROW_7 = IOMUX_PAD(0x6C0, 0x330, 2, 0x854, 2, NO_PAD_CTRL), + MX53_PAD_GPIO_5__CCM_CLKO = IOMUX_PAD(0x6C0, 0x330, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 = IOMUX_PAD(0x6C0, 0x330, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4 = IOMUX_PAD(0x6C0, 0x330, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_5__I2C3_SCL = IOMUX_PAD(0x6C0, 0x330, 6 | IOMUX_CONFIG_SION, 0x824, 2, NO_PAD_CTRL), + MX53_PAD_GPIO_5__CCM_PLL1_BYP = IOMUX_PAD(0x6C0, 0x330, 7, 0x770, 1, NO_PAD_CTRL), + MX53_PAD_GPIO_7__ESAI1_TX4_RX1 = IOMUX_PAD(0x6C4, 0x334, 0, 0x7F4, 1, NO_PAD_CTRL), + MX53_PAD_GPIO_7__GPIO1_7 = IOMUX_PAD(0x6C4, 0x334, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_7__EPIT1_EPITO = IOMUX_PAD(0x6C4, 0x334, 2, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_7__CAN1_TXCAN = IOMUX_PAD(0x6C4, 0x334, 3, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_7__UART2_TXD_MUX = IOMUX_PAD(0x6C4, 0x334, 4, __NA_, 0, MX53_UART_PAD_CTRL), + MX53_PAD_GPIO_7__FIRI_RXD = IOMUX_PAD(0x6C4, 0x334, 5, 0x80C, 1, NO_PAD_CTRL), + MX53_PAD_GPIO_7__SPDIF_PLOCK = IOMUX_PAD(0x6C4, 0x334, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_7__CCM_PLL2_BYP = IOMUX_PAD(0x6C4, 0x334, 7, 0x774, 1, NO_PAD_CTRL), + MX53_PAD_GPIO_8__ESAI1_TX5_RX0 = IOMUX_PAD(0x6C8, 0x338, 0, 0x7F8, 1, NO_PAD_CTRL), + MX53_PAD_GPIO_8__GPIO1_8 = IOMUX_PAD(0x6C8, 0x338, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_8__EPIT2_EPITO = IOMUX_PAD(0x6C8, 0x338, 2, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_8__CAN1_RXCAN = IOMUX_PAD(0x6C8, 0x338, 3, 0x760, 3, NO_PAD_CTRL), + MX53_PAD_GPIO_8__UART2_RXD_MUX = IOMUX_PAD(0x6C8, 0x338, 4, 0x880, 5, MX53_UART_PAD_CTRL), + MX53_PAD_GPIO_8__FIRI_TXD = IOMUX_PAD(0x6C8, 0x338, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_8__SPDIF_SRCLK = IOMUX_PAD(0x6C8, 0x338, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_8__CCM_PLL3_BYP = IOMUX_PAD(0x6C8, 0x338, 7, 0x778, 1, NO_PAD_CTRL), + MX53_PAD_GPIO_16__ESAI1_TX3_RX2 = IOMUX_PAD(0x6CC, 0x33C, 0, 0x7F0, 1, NO_PAD_CTRL), + MX53_PAD_GPIO_16__GPIO7_11 = IOMUX_PAD(0x6CC, 0x33C, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT = IOMUX_PAD(0x6CC, 0x33C, 2, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1 = IOMUX_PAD(0x6CC, 0x33C, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_16__SPDIF_IN1 = IOMUX_PAD(0x6CC, 0x33C, 5, 0x870, 1, NO_PAD_CTRL), + MX53_PAD_GPIO_16__I2C3_SDA = IOMUX_PAD(0x6CC, 0x33C, 6 | IOMUX_CONFIG_SION, 0x828, 2, NO_PAD_CTRL), + MX53_PAD_GPIO_16__SJC_DE_B = IOMUX_PAD(0x6CC, 0x33C, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_17__ESAI1_TX0 = IOMUX_PAD(0x6D0, 0x340, 0, 0x7E4, 1, NO_PAD_CTRL), + MX53_PAD_GPIO_17__GPIO7_12 = IOMUX_PAD(0x6D0, 0x340, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_17__SDMA_EXT_EVENT_0 = IOMUX_PAD(0x6D0, 0x340, 2, 0x868, 1, NO_PAD_CTRL), + MX53_PAD_GPIO_17__GPC_PMIC_RDY = IOMUX_PAD(0x6D0, 0x340, 3, 0x810, 1, NO_PAD_CTRL), + MX53_PAD_GPIO_17__RTC_CE_RTC_FSV_TRIG = IOMUX_PAD(0x6D0, 0x340, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_17__SPDIF_OUT1 = IOMUX_PAD(0x6D0, 0x340, 5, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_17__IPU_SNOOP2 = IOMUX_PAD(0x6D0, 0x340, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_17__SJC_JTAG_ACT = IOMUX_PAD(0x6D0, 0x340, 7, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_18__ESAI1_TX1 = IOMUX_PAD(0x6D4, 0x344, 0, 0x7E8, 1, NO_PAD_CTRL), + MX53_PAD_GPIO_18__GPIO7_13 = IOMUX_PAD(0x6D4, 0x344, 1, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_18__SDMA_EXT_EVENT_1 = IOMUX_PAD(0x6D4, 0x344, 2, 0x86C, 1, NO_PAD_CTRL), + MX53_PAD_GPIO_18__OWIRE_LINE = IOMUX_PAD(0x6D4, 0x344, 3, 0x864, 1, NO_PAD_CTRL), + MX53_PAD_GPIO_18__RTC_CE_RTC_ALARM2_TRIG = IOMUX_PAD(0x6D4, 0x344, 4, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_18__CCM_ASRC_EXT_CLK = IOMUX_PAD(0x6D4, 0x344, 5, 0x768, 1, NO_PAD_CTRL), + MX53_PAD_GPIO_18__ESDHC1_LCTL = IOMUX_PAD(0x6D4, 0x344, 6, __NA_, 0, NO_PAD_CTRL), + MX53_PAD_GPIO_18__SRC_SYSTEM_RST = IOMUX_PAD(0x6D4, 0x344, 7, __NA_, 0, NO_PAD_CTRL), +}; + +#endif /* __IOMUX_MX53_H__ */ diff --git a/arch/arm/include/asm/arch-mx5/iomux.h b/arch/arm/include/asm/arch-mx5/iomux.h deleted file mode 100644 index e3765a3..0000000 --- a/arch/arm/include/asm/arch-mx5/iomux.h +++ /dev/null @@ -1,91 +0,0 @@ -/* - * (C) Copyright 2008-2009 Freescale Semiconductor, Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __MACH_MX5_IOMUX_H__ -#define __MACH_MX5_IOMUX_H__ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/imx-regs.h> -#include <asm/arch/mx5x_pins.h> - -typedef unsigned int iomux_pin_name_t; - -/* various IOMUX output functions */ -typedef enum iomux_config { - IOMUX_CONFIG_ALT0, /*!< used as alternate function 0 */ - IOMUX_CONFIG_ALT1, /*!< used as alternate function 1 */ - IOMUX_CONFIG_ALT2, /*!< used as alternate function 2 */ - IOMUX_CONFIG_ALT3, /*!< used as alternate function 3 */ - IOMUX_CONFIG_ALT4, /*!< used as alternate function 4 */ - IOMUX_CONFIG_ALT5, /*!< used as alternate function 5 */ - IOMUX_CONFIG_ALT6, /*!< used as alternate function 6 */ - IOMUX_CONFIG_ALT7, /*!< used as alternate function 7 */ - IOMUX_CONFIG_GPIO, /*!< added to help user use GPIO mode */ - IOMUX_CONFIG_SION = 0x1 << 4, /*!< used as LOOPBACK:MUX SION bit */ -} iomux_pin_cfg_t; - -/* various IOMUX pad functions */ -typedef enum iomux_pad_config { - PAD_CTL_SRE_SLOW = 0x0 << 0, /* Slow slew rate */ - PAD_CTL_SRE_FAST = 0x1 << 0, /* Fast slew rate */ - PAD_CTL_DRV_LOW = 0x0 << 1, /* Low drive strength */ - PAD_CTL_DRV_MEDIUM = 0x1 << 1, /* Medium drive strength */ - PAD_CTL_DRV_HIGH = 0x2 << 1, /* High drive strength */ - PAD_CTL_DRV_MAX = 0x3 << 1, /* Max drive strength */ - PAD_CTL_ODE_OPENDRAIN_NONE = 0x0 << 3, /* Opendrain disable */ - PAD_CTL_ODE_OPENDRAIN_ENABLE = 0x1 << 3,/* Opendrain enable */ - PAD_CTL_100K_PD = 0x0 << 4, /* 100Kohm pulldown */ - PAD_CTL_47K_PU = 0x1 << 4, /* 47Kohm pullup */ - PAD_CTL_100K_PU = 0x2 << 4, /* 100Kohm pullup */ - PAD_CTL_22K_PU = 0x3 << 4, /* 22Kohm pullup */ - PAD_CTL_PUE_KEEPER = 0x0 << 6, /* enable pulldown */ - PAD_CTL_PUE_PULL = 0x1 << 6, /* enable pullup */ - PAD_CTL_PKE_NONE = 0x0 << 7, /* Disable pullup/pulldown */ - PAD_CTL_PKE_ENABLE = 0x1 << 7, /* Enable pullup/pulldown */ - PAD_CTL_HYS_NONE = 0x0 << 8, /* Hysteresis disabled */ - PAD_CTL_HYS_ENABLE = 0x1 << 8, /* Hysteresis enabled */ - PAD_CTL_DDR_INPUT_CMOS = 0x0 << 9,/* DDR input CMOS */ - PAD_CTL_DDR_INPUT_DDR = 0x1 << 9,/* DDR input DDR */ - PAD_CTL_DRV_VOT_LOW = 0x1 << 13, /* Low voltage mode */ - PAD_CTL_DRV_VOT_HIGH = 0x0 << 13,/* High voltage mode */ -} iomux_pad_config_t; - -/* various IOMUX input functions */ -typedef enum iomux_input_config { - INPUT_CTL_PATH0 = 0x0, - INPUT_CTL_PATH1, - INPUT_CTL_PATH2, - INPUT_CTL_PATH3, - INPUT_CTL_PATH4, - INPUT_CTL_PATH5, - INPUT_CTL_PATH6, - INPUT_CTL_PATH7, -} iomux_input_config_t; - -void mxc_request_iomux(iomux_pin_name_t pin, iomux_pin_cfg_t config); -void mxc_free_iomux(iomux_pin_name_t pin, iomux_pin_cfg_t config); -void mxc_iomux_set_pad(iomux_pin_name_t pin, u32 config); -unsigned int mxc_iomux_get_pad(iomux_pin_name_t pin); -void mxc_iomux_set_input(iomux_input_select_t input, u32 config); - -#endif /* __MACH_MX5_IOMUX_H__ */ diff --git a/arch/arm/include/asm/arch-mx5/mx5x_pins.h b/arch/arm/include/asm/arch-mx5/mx5x_pins.h deleted file mode 100644 index 3457f6a..0000000 --- a/arch/arm/include/asm/arch-mx5/mx5x_pins.h +++ /dev/null @@ -1,879 +0,0 @@ -/* - * (C) Copyright 2008-2009 Freescale Semiconductor, Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_MX5_MX5X_PINS_H__ -#define __ASM_ARCH_MX5_MX5X_PINS_H__ - -#ifndef __ASSEMBLY__ - -/* - * In order to identify pins more effectively, each mux-controlled pin's - * enumerated value is constructed in the following way: - * - * ------------------------------------------------------------------- - * 31-29 | 28 - 24 | 23 - 21 | 20 - 10| 9 - 0 - * ------------------------------------------------------------------- - * IO_P | IO_I | GPIO_I | PAD_I | MUX_I - * ------------------------------------------------------------------- - * - * Bit 0 to 9 contains MUX_I used to identify the register - * offset (0-based. base is IOMUX_module_base) defined in the Section - * "sw_pad_ctl & sw_mux_ctl details" of the IC Spec. The - * similar field definitions are used for the pad control register. - * The IOMUX controller can be split in two parts. At the begeinning, - * there is the register definitions for the multiplexing each pin. - * Then there is a set of registers (PAD_I) to configure each pin - * (pullup, pulldown, etc). - * PAD_I defines the offset of the pad register for each pin. - * GPIO_I defines, if available, the number of gpio that can be - * connected to that pad - * IO_I defines the multiplexer mode required to set the pad in gpio mode - * IO_P defines the gpio structure (gpio1..gpio4) the pad belongs - * - * For example, the MX51_PIN_ETM_D0 is defined in the enumeration: - * ( (0x28 - MUX_I_START) << MUX_I)|( (0x250 - PAD_I_START) << PAD_I) - * It means the mux control register is at register offset 0x28. The pad control - * register offset is: 0x250 and also occupy the least significant bits - * within the register. - */ - -/*! - * Starting bit position within each entry of \b iomux_pins to represent the - * MUX control register offset - */ -#define MUX_I 0 -/*! - * Starting bit position within each entry of \b iomux_pins to represent the - * PAD control register offset - */ -#define PAD_I 10 -/*! - * Starting bit position within each entry of \b iomux_pins to represent which - * mux mode is for GPIO (0-based) - */ -#define GPIO_I 21 - -#define MUX_IO_P 29 -#define MUX_IO_I 24 -#define IOMUX_TO_GPIO(pin) ((((unsigned int)pin >> MUX_IO_P) * \ - GPIO_NUM_PIN) + ((pin >> MUX_IO_I) &\ - ((1 << (MUX_IO_P - MUX_IO_I)) - 1))) -#define IOMUX_TO_IRQ(pin) (MXC_GPIO_INT_BASE + IOMUX_TO_GPIO(pin)) - -#define NON_GPIO_PORT 0x7 -#define PIN_TO_MUX_MASK ((1 << (PAD_I - MUX_I)) - 1) -#define PIN_TO_PAD_MASK ((1 << (GPIO_I - PAD_I)) - 1) -#define PIN_TO_ALT_GPIO_MASK ((1 << (MUX_IO_I - GPIO_I)) - 1) - -#define NON_MUX_I PIN_TO_MUX_MASK -#define NON_PAD_I PIN_TO_PAD_MASK - -#if defined(CONFIG_MX51) -#define MUX_I_START 0x001C -#define PAD_I_START 0x3F0 -#define INPUT_CTL_START 0x8C4 -#define MUX_I_END (PAD_I_START - 4) -#elif defined(CONFIG_MX53) -#define MUX_I_START 0x0020 -#define PAD_I_START 0x348 -#define INPUT_CTL_START 0x730 -#define MUX_I_END (PAD_I_START - 4) -#else -#error "CPU_TYPE not defined" -#endif - -#define _MXC_BUILD_PIN(gp, gi, ga, mi, pi) \ - (((gp) << MUX_IO_P) | ((gi) << MUX_IO_I) | \ - ((mi) << MUX_I) | \ - ((pi - PAD_I_START) << PAD_I) | \ - ((ga) << GPIO_I)) - -#define _MXC_BUILD_GPIO_PIN(gp, gi, ga, mi, pi) \ - _MXC_BUILD_PIN(gp, gi, ga, mi, pi) - -#define _MXC_BUILD_NON_GPIO_PIN(mi, pi) \ - _MXC_BUILD_PIN(NON_GPIO_PORT, 0, 0, mi, pi) - -#define PIN_TO_IOMUX_MUX(pin) ((pin >> MUX_I) & PIN_TO_MUX_MASK) -#define PIN_TO_IOMUX_PAD(pin) ((pin >> PAD_I) & PIN_TO_PAD_MASK) -#define PIN_TO_ALT_GPIO(pin) ((pin >> GPIO_I) & PIN_TO_ALT_GPIO_MASK) -#define PIN_TO_IOMUX_INDEX(pin) (PIN_TO_IOMUX_MUX(pin) >> 2) - -/* - * This enumeration is constructed based on the Section - * "sw_pad_ctl & sw_mux_ctl details" of the MX51 IC Spec. Each enumerated - * value is constructed based on the rules described above. - */ -enum { - MX51_PIN_EIM_DA0 = _MXC_BUILD_NON_GPIO_PIN(0x1C, 0x7A8), - MX51_PIN_EIM_DA1 = _MXC_BUILD_NON_GPIO_PIN(0x20, 0x7A8), - MX51_PIN_EIM_DA2 = _MXC_BUILD_NON_GPIO_PIN(0x24, 0x7A8), - MX51_PIN_EIM_DA3 = _MXC_BUILD_NON_GPIO_PIN(0x28, 0x7A8), - MX51_PIN_EIM_DA4 = _MXC_BUILD_NON_GPIO_PIN(0x2C, 0x7AC), - MX51_PIN_EIM_DA5 = _MXC_BUILD_NON_GPIO_PIN(0x30, 0x7AC), - MX51_PIN_EIM_DA6 = _MXC_BUILD_NON_GPIO_PIN(0x34, 0x7AC), - MX51_PIN_EIM_DA7 = _MXC_BUILD_NON_GPIO_PIN(0x38, 0x7AC), - MX51_PIN_EIM_DA8 = _MXC_BUILD_NON_GPIO_PIN(0x3C, 0x7B0), - MX51_PIN_EIM_DA9 = _MXC_BUILD_NON_GPIO_PIN(0x40, 0x7B0), - MX51_PIN_EIM_DA10 = _MXC_BUILD_NON_GPIO_PIN(0x44, 0x7B0), - MX51_PIN_EIM_DA11 = _MXC_BUILD_NON_GPIO_PIN(0x48, 0x7B0), - MX51_PIN_EIM_DA12 = _MXC_BUILD_NON_GPIO_PIN(0x4C, 0x7BC), - MX51_PIN_EIM_DA13 = _MXC_BUILD_NON_GPIO_PIN(0x50, 0x7BC), - MX51_PIN_EIM_DA14 = _MXC_BUILD_NON_GPIO_PIN(0x54, 0x7BC), - MX51_PIN_EIM_DA15 = _MXC_BUILD_NON_GPIO_PIN(0x58, 0x7BC), - MX51_PIN_EIM_D16 = _MXC_BUILD_GPIO_PIN(1, 0, 1, 0x5C, 0x3F0), - MX51_PIN_EIM_D17 = _MXC_BUILD_GPIO_PIN(1, 1, 1, 0x60, 0x3F4), - MX51_PIN_EIM_D18 = _MXC_BUILD_GPIO_PIN(1, 2, 1, 0x64, 0x3F8), - MX51_PIN_EIM_D19 = _MXC_BUILD_GPIO_PIN(1, 3, 1, 0x68, 0x3FC), - MX51_PIN_EIM_D20 = _MXC_BUILD_GPIO_PIN(1, 4, 1, 0x6C, 0x400), - MX51_PIN_EIM_D21 = _MXC_BUILD_GPIO_PIN(1, 5, 1, 0x70, 0x404), - MX51_PIN_EIM_D22 = _MXC_BUILD_GPIO_PIN(1, 6, 1, 0x74, 0x408), - MX51_PIN_EIM_D23 = _MXC_BUILD_GPIO_PIN(1, 7, 1, 0x78, 0x40C), - MX51_PIN_EIM_D24 = _MXC_BUILD_GPIO_PIN(1, 8, 1, 0x7C, 0x410), - MX51_PIN_EIM_D25 = _MXC_BUILD_NON_GPIO_PIN(0x80, 0x414), - MX51_PIN_EIM_D26 = _MXC_BUILD_NON_GPIO_PIN(0x84, 0x418), - MX51_PIN_EIM_D27 = _MXC_BUILD_GPIO_PIN(1, 9, 1, 0x88, 0x41C), - MX51_PIN_EIM_D28 = _MXC_BUILD_NON_GPIO_PIN(0x8C, 0x420), - MX51_PIN_EIM_D29 = _MXC_BUILD_NON_GPIO_PIN(0x90, 0x424), - MX51_PIN_EIM_D30 = _MXC_BUILD_NON_GPIO_PIN(0x94, 0x428), - MX51_PIN_EIM_D31 = _MXC_BUILD_NON_GPIO_PIN(0x98, 0x42C), - MX51_PIN_EIM_A16 = _MXC_BUILD_GPIO_PIN(1, 10, 1, 0x9C, 0x430), - MX51_PIN_EIM_A17 = _MXC_BUILD_GPIO_PIN(1, 11, 1, 0xA0, 0x434), - MX51_PIN_EIM_A18 = _MXC_BUILD_GPIO_PIN(1, 12, 1, 0xA4, 0x438), - MX51_PIN_EIM_A19 = _MXC_BUILD_GPIO_PIN(1, 13, 1, 0xA8, 0x43C), - MX51_PIN_EIM_A20 = _MXC_BUILD_GPIO_PIN(1, 14, 1, 0xAC, 0x440), - MX51_PIN_EIM_A21 = _MXC_BUILD_GPIO_PIN(1, 15, 1, 0xB0, 0x444), - MX51_PIN_EIM_A22 = _MXC_BUILD_GPIO_PIN(1, 16, 1, 0xB4, 0x448), - MX51_PIN_EIM_A23 = _MXC_BUILD_GPIO_PIN(1, 17, 1, 0xB8, 0x44C), - MX51_PIN_EIM_A24 = _MXC_BUILD_GPIO_PIN(1, 18, 1, 0xBC, 0x450), - MX51_PIN_EIM_A25 = _MXC_BUILD_GPIO_PIN(1, 19, 1, 0xC0, 0x454), - MX51_PIN_EIM_A26 = _MXC_BUILD_GPIO_PIN(1, 20, 1, 0xC4, 0x458), - MX51_PIN_EIM_A27 = _MXC_BUILD_GPIO_PIN(1, 21, 1, 0xC8, 0x45C), - MX51_PIN_EIM_EB0 = _MXC_BUILD_NON_GPIO_PIN(0xCC, 0x460), - MX51_PIN_EIM_EB1 = _MXC_BUILD_NON_GPIO_PIN(0xD0, 0x464), - MX51_PIN_EIM_EB2 = _MXC_BUILD_GPIO_PIN(1, 22, 1, 0xD4, 0x468), - MX51_PIN_EIM_EB3 = _MXC_BUILD_GPIO_PIN(1, 23, 1, 0xD8, 0x46C), - MX51_PIN_EIM_OE = _MXC_BUILD_GPIO_PIN(1, 24, 1, 0xDC, 0x470), - MX51_PIN_EIM_CS0 = _MXC_BUILD_GPIO_PIN(1, 25, 1, 0xE0, 0x474), - MX51_PIN_EIM_CS1 = _MXC_BUILD_GPIO_PIN(1, 26, 1, 0xE4, 0x478), - MX51_PIN_EIM_CS2 = _MXC_BUILD_GPIO_PIN(1, 27, 1, 0xE8, 0x47C), - MX51_PIN_EIM_CS3 = _MXC_BUILD_GPIO_PIN(1, 28, 1, 0xEC, 0x480), - MX51_PIN_EIM_CS4 = _MXC_BUILD_GPIO_PIN(1, 29, 1, 0xF0, 0x484), - MX51_PIN_EIM_CS5 = _MXC_BUILD_GPIO_PIN(1, 30, 1, 0xF4, 0x488), - MX51_PIN_EIM_DTACK = _MXC_BUILD_GPIO_PIN(1, 31, 1, 0xF8, 0x48C), - MX51_PIN_EIM_LBA = _MXC_BUILD_GPIO_PIN(2, 1, 1, 0xFC, 0x494), - MX51_PIN_EIM_CRE = _MXC_BUILD_GPIO_PIN(2, 2, 1, 0x100, 0x4A0), - MX51_PIN_DRAM_CS1 = _MXC_BUILD_NON_GPIO_PIN(0x104, 0x4D0), - MX51_PIN_NANDF_WE_B = _MXC_BUILD_GPIO_PIN(2, 3, 3, 0x108, 0x4E4), - MX51_PIN_NANDF_RE_B = _MXC_BUILD_GPIO_PIN(2, 4, 3, 0x10C, 0x4E8), - MX51_PIN_NANDF_ALE = _MXC_BUILD_GPIO_PIN(2, 5, 3, 0x110, 0x4EC), - MX51_PIN_NANDF_CLE = _MXC_BUILD_GPIO_PIN(2, 6, 3, 0x114, 0x4F0), - MX51_PIN_NANDF_WP_B = _MXC_BUILD_GPIO_PIN(2, 7, 3, 0x118, 0x4F4), - MX51_PIN_NANDF_RB0 = _MXC_BUILD_GPIO_PIN(2, 8, 3, 0x11C, 0x4F8), - MX51_PIN_NANDF_RB1 = _MXC_BUILD_GPIO_PIN(2, 9, 3, 0x120, 0x4FC), - MX51_PIN_NANDF_RB2 = _MXC_BUILD_GPIO_PIN(2, 10, 3, 0x124, 0x500), - MX51_PIN_NANDF_RB3 = _MXC_BUILD_GPIO_PIN(2, 11, 3, 0x128, 0x504), - MX51_PIN_GPIO_NAND = _MXC_BUILD_GPIO_PIN(2, 12, 3, 0x12C, 0x514), - MX51_PIN_NANDF_RB4 = MX51_PIN_GPIO_NAND, - MX51_PIN_NANDF_RB5 = _MXC_BUILD_GPIO_PIN(2, 13, 3, 0x130, 0x5D8), - MX51_PIN_NANDF_RB6 = _MXC_BUILD_GPIO_PIN(2, 14, 3, 0x134, 0x5DC), - MX51_PIN_NANDF_RB7 = _MXC_BUILD_GPIO_PIN(2, 15, 3, 0x138, 0x5E0), - MX51_PIN_NANDF_CS0 = _MXC_BUILD_GPIO_PIN(2, 16, 3, 0x130, 0x518), - MX51_PIN_NANDF_CS1 = _MXC_BUILD_GPIO_PIN(2, 17, 3, 0x134, 0x51C), - MX51_PIN_NANDF_CS2 = _MXC_BUILD_GPIO_PIN(2, 18, 3, 0x138, 0x520), - MX51_PIN_NANDF_CS3 = _MXC_BUILD_GPIO_PIN(2, 19, 3, 0x13C, 0x524), - MX51_PIN_NANDF_CS4 = _MXC_BUILD_GPIO_PIN(2, 20, 3, 0x140, 0x528), - MX51_PIN_NANDF_CS5 = _MXC_BUILD_GPIO_PIN(2, 21, 3, 0x144, 0x52C), - MX51_PIN_NANDF_CS6 = _MXC_BUILD_GPIO_PIN(2, 22, 3, 0x148, 0x530), - MX51_PIN_NANDF_CS7 = _MXC_BUILD_GPIO_PIN(2, 23, 3, 0x14C, 0x534), - MX51_PIN_NANDF_RDY_INT = _MXC_BUILD_GPIO_PIN(2, 24, 3, 0x150, 0x538), - MX51_PIN_NANDF_D15 = _MXC_BUILD_GPIO_PIN(2, 25, 3, 0x154, 0x53C), - MX51_PIN_NANDF_D14 = _MXC_BUILD_GPIO_PIN(2, 26, 3, 0x158, 0x540), - MX51_PIN_NANDF_D13 = _MXC_BUILD_GPIO_PIN(2, 27, 3, 0x15C, 0x544), - MX51_PIN_NANDF_D12 = _MXC_BUILD_GPIO_PIN(2, 28, 3, 0x160, 0x548), - MX51_PIN_NANDF_D11 = _MXC_BUILD_GPIO_PIN(2, 29, 3, 0x164, 0x54C), - MX51_PIN_NANDF_D10 = _MXC_BUILD_GPIO_PIN(2, 30, 3, 0x168, 0x550), - MX51_PIN_NANDF_D9 = _MXC_BUILD_GPIO_PIN(2, 31, 3, 0x16C, 0x554), - MX51_PIN_NANDF_D8 = _MXC_BUILD_GPIO_PIN(3, 0, 3, 0x170, 0x558), - MX51_PIN_NANDF_D7 = _MXC_BUILD_GPIO_PIN(3, 1, 3, 0x174, 0x55C), - MX51_PIN_NANDF_D6 = _MXC_BUILD_GPIO_PIN(3, 2, 3, 0x178, 0x560), - MX51_PIN_NANDF_D5 = _MXC_BUILD_GPIO_PIN(3, 3, 3, 0x17C, 0x564), - MX51_PIN_NANDF_D4 = _MXC_BUILD_GPIO_PIN(3, 4, 3, 0x180, 0x568), - MX51_PIN_NANDF_D3 = _MXC_BUILD_GPIO_PIN(3, 5, 3, 0x184, 0x56C), - MX51_PIN_NANDF_D2 = _MXC_BUILD_GPIO_PIN(3, 6, 3, 0x188, 0x570), - MX51_PIN_NANDF_D1 = _MXC_BUILD_GPIO_PIN(3, 7, 3, 0x18C, 0x574), - MX51_PIN_NANDF_D0 = _MXC_BUILD_GPIO_PIN(3, 8, 3, 0x190, 0x578), - MX51_PIN_CSI1_D8 = _MXC_BUILD_GPIO_PIN(2, 12, 3, 0x194, 0x57C), - MX51_PIN_CSI1_D9 = _MXC_BUILD_GPIO_PIN(2, 13, 3, 0x198, 0x580), - MX51_PIN_CSI1_D10 = _MXC_BUILD_NON_GPIO_PIN(0x19C, 0x584), - MX51_PIN_CSI1_D11 = _MXC_BUILD_NON_GPIO_PIN(0x1A0, 0x588), - MX51_PIN_CSI1_D12 = _MXC_BUILD_NON_GPIO_PIN(0x1A4, 0x58C), - MX51_PIN_CSI1_D13 = _MXC_BUILD_NON_GPIO_PIN(0x1A8, 0x590), - MX51_PIN_CSI1_D14 = _MXC_BUILD_NON_GPIO_PIN(0x1AC, 0x594), - MX51_PIN_CSI1_D15 = _MXC_BUILD_NON_GPIO_PIN(0x1B0, 0x598), - MX51_PIN_CSI1_D16 = _MXC_BUILD_NON_GPIO_PIN(0x1B4, 0x59C), - MX51_PIN_CSI1_D17 = _MXC_BUILD_NON_GPIO_PIN(0x1B8, 0x5A0), - MX51_PIN_CSI1_D18 = _MXC_BUILD_NON_GPIO_PIN(0x1BC, 0x5A4), - MX51_PIN_CSI1_D19 = _MXC_BUILD_NON_GPIO_PIN(0x1C0, 0x5A8), - MX51_PIN_CSI1_VSYNC = _MXC_BUILD_NON_GPIO_PIN(0x1C4, 0x5AC), - MX51_PIN_CSI1_HSYNC = _MXC_BUILD_NON_GPIO_PIN(0x1C8, 0x5B0), - MX51_PIN_CSI1_PIXCLK = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x5B4), - MX51_PIN_CSI1_MCLK = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x5B8), - MX51_PIN_CSI1_PKE0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x860), - MX51_PIN_CSI2_D12 = _MXC_BUILD_GPIO_PIN(3, 9, 3, 0x1CC, 0x5BC), - MX51_PIN_CSI2_D13 = _MXC_BUILD_GPIO_PIN(3, 10, 3, 0x1D0, 0x5C0), - MX51_PIN_CSI2_D14 = _MXC_BUILD_GPIO_PIN(3, 11, 3, 0x1D4, 0x5C4), - MX51_PIN_CSI2_D15 = _MXC_BUILD_GPIO_PIN(3, 12, 3, 0x1D8, 0x5C8), - MX51_PIN_CSI2_D16 = _MXC_BUILD_GPIO_PIN(3, 11, 3, 0x1DC, 0x5CC), - MX51_PIN_CSI2_D17 = _MXC_BUILD_GPIO_PIN(3, 12, 3, 0x1E0, 0x5D0), - MX51_PIN_CSI2_D18 = _MXC_BUILD_GPIO_PIN(3, 11, 3, 0x1E4, 0x5D4), - MX51_PIN_CSI2_D19 = _MXC_BUILD_GPIO_PIN(3, 12, 3, 0x1E8, 0x5D8), - MX51_PIN_CSI2_VSYNC = _MXC_BUILD_GPIO_PIN(3, 13, 3, 0x1EC, 0x5DC), - MX51_PIN_CSI2_HSYNC = _MXC_BUILD_GPIO_PIN(3, 14, 3, 0x1F0, 0x5E0), - MX51_PIN_CSI2_PIXCLK = _MXC_BUILD_GPIO_PIN(3, 15, 3, 0x1F4, 0x5E4), - MX51_PIN_CSI2_PKE0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x81C), - MX51_PIN_I2C1_CLK = _MXC_BUILD_GPIO_PIN(3, 16, 3, 0x1F8, 0x5E8), - MX51_PIN_I2C1_DAT = _MXC_BUILD_GPIO_PIN(3, 17, 3, 0x1FC, 0x5EC), - MX51_PIN_AUD3_BB_TXD = _MXC_BUILD_GPIO_PIN(3, 18, 3, 0x200, 0x5F0), - MX51_PIN_AUD3_BB_RXD = _MXC_BUILD_GPIO_PIN(3, 19, 3, 0x204, 0x5F4), - MX51_PIN_AUD3_BB_CK = _MXC_BUILD_GPIO_PIN(3, 20, 3, 0x208, 0x5F8), - MX51_PIN_AUD3_BB_FS = _MXC_BUILD_GPIO_PIN(3, 21, 3, 0x20C, 0x5FC), - MX51_PIN_CSPI1_MOSI = _MXC_BUILD_GPIO_PIN(3, 22, 3, 0x210, 0x600), - MX51_PIN_CSPI1_MISO = _MXC_BUILD_GPIO_PIN(3, 23, 3, 0x214, 0x604), - MX51_PIN_CSPI1_SS0 = _MXC_BUILD_GPIO_PIN(3, 24, 3, 0x218, 0x608), - MX51_PIN_CSPI1_SS1 = _MXC_BUILD_GPIO_PIN(3, 25, 3, 0x21C, 0x60C), - MX51_PIN_CSPI1_RDY = _MXC_BUILD_GPIO_PIN(3, 26, 3, 0x220, 0x610), - MX51_PIN_CSPI1_SCLK = _MXC_BUILD_GPIO_PIN(3, 27, 3, 0x224, 0x614), - MX51_PIN_UART1_RXD = _MXC_BUILD_GPIO_PIN(3, 28, 3, 0x228, 0x618), - MX51_PIN_UART1_TXD = _MXC_BUILD_GPIO_PIN(3, 29, 3, 0x22C, 0x61C), - MX51_PIN_UART1_RTS = _MXC_BUILD_GPIO_PIN(3, 30, 3, 0x230, 0x620), - MX51_PIN_UART1_CTS = _MXC_BUILD_GPIO_PIN(3, 31, 3, 0x234, 0x624), - MX51_PIN_UART2_RXD = _MXC_BUILD_GPIO_PIN(0, 20, 3, 0x238, 0x628), - MX51_PIN_UART2_TXD = _MXC_BUILD_GPIO_PIN(0, 21, 3, 0x23C, 0x62C), - MX51_PIN_UART3_RXD = _MXC_BUILD_GPIO_PIN(0, 22, 3, 0x240, 0x630), - MX51_PIN_UART3_TXD = _MXC_BUILD_GPIO_PIN(0, 23, 3, 0x244, 0x634), - MX51_PIN_OWIRE_LINE = _MXC_BUILD_GPIO_PIN(0, 24, 3, 0x248, 0x638), - MX51_PIN_KEY_ROW0 = _MXC_BUILD_NON_GPIO_PIN(0x24C, 0x63C), - MX51_PIN_KEY_ROW1 = _MXC_BUILD_NON_GPIO_PIN(0x250, 0x640), - MX51_PIN_KEY_ROW2 = _MXC_BUILD_NON_GPIO_PIN(0x254, 0x644), - MX51_PIN_KEY_ROW3 = _MXC_BUILD_NON_GPIO_PIN(0x258, 0x648), - MX51_PIN_KEY_COL0 = _MXC_BUILD_NON_GPIO_PIN(0x25C, 0x64C), - MX51_PIN_KEY_COL1 = _MXC_BUILD_NON_GPIO_PIN(0x260, 0x650), - MX51_PIN_KEY_COL2 = _MXC_BUILD_NON_GPIO_PIN(0x264, 0x654), - MX51_PIN_KEY_COL3 = _MXC_BUILD_NON_GPIO_PIN(0x268, 0x658), - MX51_PIN_KEY_COL4 = _MXC_BUILD_NON_GPIO_PIN(0x26C, 0x65C), - MX51_PIN_KEY_COL5 = _MXC_BUILD_NON_GPIO_PIN(0x270, 0x660), - MX51_PIN_USBH1_CLK = _MXC_BUILD_GPIO_PIN(0, 25, 2, 0x278, 0x678), - MX51_PIN_USBH1_DIR = _MXC_BUILD_GPIO_PIN(0, 26, 2, 0x27C, 0x67C), - MX51_PIN_USBH1_STP = _MXC_BUILD_GPIO_PIN(0, 27, 2, 0x280, 0x680), - MX51_PIN_USBH1_NXT = _MXC_BUILD_GPIO_PIN(0, 28, 2, 0x284, 0x684), - MX51_PIN_USBH1_DATA0 = _MXC_BUILD_GPIO_PIN(0, 11, 2, 0x288, 0x688), - MX51_PIN_USBH1_DATA1 = _MXC_BUILD_GPIO_PIN(0, 12, 2, 0x28C, 0x68C), - MX51_PIN_USBH1_DATA2 = _MXC_BUILD_GPIO_PIN(0, 13, 2, 0x290, 0x690), - MX51_PIN_USBH1_DATA3 = _MXC_BUILD_GPIO_PIN(0, 14, 2, 0x294, 0x694), - MX51_PIN_USBH1_DATA4 = _MXC_BUILD_GPIO_PIN(0, 15, 2, 0x298, 0x698), - MX51_PIN_USBH1_DATA5 = _MXC_BUILD_GPIO_PIN(0, 16, 2, 0x29C, 0x69C), - MX51_PIN_USBH1_DATA6 = _MXC_BUILD_GPIO_PIN(0, 17, 2, 0x2A0, 0x6A0), - MX51_PIN_USBH1_DATA7 = _MXC_BUILD_GPIO_PIN(0, 18, 2, 0x2A4, 0x6A4), - MX51_PIN_DI1_PIN11 = _MXC_BUILD_GPIO_PIN(2, 0, 4, 0x2A8, 0x6A8), - MX51_PIN_DI1_PIN12 = _MXC_BUILD_GPIO_PIN(2, 1, 4, 0x2AC, 0x6AC), - MX51_PIN_DI1_PIN13 = _MXC_BUILD_GPIO_PIN(2, 2, 4, 0x2B0, 0x6B0), - MX51_PIN_DI1_D0_CS = _MXC_BUILD_GPIO_PIN(2, 3, 4, 0x2B4, 0x6B4), - MX51_PIN_DI1_D1_CS = _MXC_BUILD_GPIO_PIN(2, 4, 4, 0x2B8, 0x6B8), - MX51_PIN_DISPB2_SER_DIN = _MXC_BUILD_GPIO_PIN(2, 5, 4, 0x2BC, 0x6BC), - MX51_PIN_DISPB2_SER_DIO = _MXC_BUILD_GPIO_PIN(2, 6, 4, 0x2C0, 0x6C0), - MX51_PIN_DISPB2_SER_CLK = _MXC_BUILD_GPIO_PIN(2, 7, 4, 0x2C4, 0x6C4), - MX51_PIN_DISPB2_SER_RS = _MXC_BUILD_GPIO_PIN(2, 8, 4, 0x2C8, 0x6C8), - MX51_PIN_DISP1_DAT0 = _MXC_BUILD_NON_GPIO_PIN(0x2CC, 0x6CC), - MX51_PIN_DISP1_DAT1 = _MXC_BUILD_NON_GPIO_PIN(0x2D0, 0x6D0), - MX51_PIN_DISP1_DAT2 = _MXC_BUILD_NON_GPIO_PIN(0x2D4, 0x6D4), - MX51_PIN_DISP1_DAT3 = _MXC_BUILD_NON_GPIO_PIN(0x2D8, 0x6D8), - MX51_PIN_DISP1_DAT4 = _MXC_BUILD_NON_GPIO_PIN(0x2DC, 0x6DC), - MX51_PIN_DISP1_DAT5 = _MXC_BUILD_NON_GPIO_PIN(0x2E0, 0x6E0), - MX51_PIN_DISP1_DAT6 = _MXC_BUILD_NON_GPIO_PIN(0x2E4, 0x6E4), - MX51_PIN_DISP1_DAT7 = _MXC_BUILD_NON_GPIO_PIN(0x2E8, 0x6E8), - MX51_PIN_DISP1_DAT8 = _MXC_BUILD_NON_GPIO_PIN(0x2EC, 0x6EC), - MX51_PIN_DISP1_DAT9 = _MXC_BUILD_NON_GPIO_PIN(0x2F0, 0x6F0), - MX51_PIN_DISP1_DAT10 = _MXC_BUILD_NON_GPIO_PIN(0x2F4, 0x6F4), - MX51_PIN_DISP1_DAT11 = _MXC_BUILD_NON_GPIO_PIN(0x2F8, 0x6F8), - MX51_PIN_DISP1_DAT12 = _MXC_BUILD_NON_GPIO_PIN(0x2FC, 0x6FC), - MX51_PIN_DISP1_DAT13 = _MXC_BUILD_NON_GPIO_PIN(0x300, 0x700), - MX51_PIN_DISP1_DAT14 = _MXC_BUILD_NON_GPIO_PIN(0x304, 0x704), - MX51_PIN_DISP1_DAT15 = _MXC_BUILD_NON_GPIO_PIN(0x308, 0x708), - MX51_PIN_DISP1_DAT16 = _MXC_BUILD_NON_GPIO_PIN(0x30C, 0x70C), - MX51_PIN_DISP1_DAT17 = _MXC_BUILD_NON_GPIO_PIN(0x310, 0x710), - MX51_PIN_DISP1_DAT18 = _MXC_BUILD_NON_GPIO_PIN(0x314, 0x714), - MX51_PIN_DISP1_DAT19 = _MXC_BUILD_NON_GPIO_PIN(0x318, 0x718), - MX51_PIN_DISP1_DAT20 = _MXC_BUILD_NON_GPIO_PIN(0x31C, 0x71C), - MX51_PIN_DISP1_DAT21 = _MXC_BUILD_NON_GPIO_PIN(0x320, 0x720), - MX51_PIN_DISP1_DAT22 = _MXC_BUILD_NON_GPIO_PIN(0x324, 0x724), - MX51_PIN_DISP1_DAT23 = _MXC_BUILD_NON_GPIO_PIN(0x328, 0x728), - MX51_PIN_DI1_PIN3 = _MXC_BUILD_NON_GPIO_PIN(0x32C, 0x72C), - MX51_PIN_DI1_PIN2 = _MXC_BUILD_NON_GPIO_PIN(0x330, 0x734), - MX51_PIN_DI_GP1 = _MXC_BUILD_NON_GPIO_PIN(0x334, 0x73C), - MX51_PIN_DI_GP2 = _MXC_BUILD_NON_GPIO_PIN(0x338, 0x740), - MX51_PIN_DI_GP3 = _MXC_BUILD_NON_GPIO_PIN(0x33C, 0x744), - MX51_PIN_DI2_PIN4 = _MXC_BUILD_NON_GPIO_PIN(0x340, 0x748), - MX51_PIN_DI2_PIN2 = _MXC_BUILD_NON_GPIO_PIN(0x344, 0x74C), - MX51_PIN_DI2_PIN3 = _MXC_BUILD_NON_GPIO_PIN(0x348, 0x750), - MX51_PIN_DI2_DISP_CLK = _MXC_BUILD_NON_GPIO_PIN(0x34C, 0x754), - MX51_PIN_DI_GP4 = _MXC_BUILD_NON_GPIO_PIN(0x350, 0x758), - MX51_PIN_DISP2_DAT0 = _MXC_BUILD_NON_GPIO_PIN(0x354, 0x75C), - MX51_PIN_DISP2_DAT1 = _MXC_BUILD_NON_GPIO_PIN(0x358, 0x760), - MX51_PIN_DISP2_DAT2 = _MXC_BUILD_NON_GPIO_PIN(0x35C, 0x764), - MX51_PIN_DISP2_DAT3 = _MXC_BUILD_NON_GPIO_PIN(0x360, 0x768), - MX51_PIN_DISP2_DAT4 = _MXC_BUILD_NON_GPIO_PIN(0x364, 0x76C), - MX51_PIN_DISP2_DAT5 = _MXC_BUILD_NON_GPIO_PIN(0x368, 0x770), - MX51_PIN_DISP2_DAT6 = _MXC_BUILD_GPIO_PIN(0, 19, 5, 0x36C, 0x774), - MX51_PIN_DISP2_DAT7 = _MXC_BUILD_GPIO_PIN(0, 29, 5, 0x370, 0x778), - MX51_PIN_DISP2_DAT8 = _MXC_BUILD_GPIO_PIN(0, 30, 5, 0x374, 0x77C), - MX51_PIN_DISP2_DAT9 = _MXC_BUILD_GPIO_PIN(0, 31, 5, 0x378, 0x780), - MX51_PIN_DISP2_DAT10 = _MXC_BUILD_NON_GPIO_PIN(0x37C, 0x784), - MX51_PIN_DISP2_DAT11 = _MXC_BUILD_NON_GPIO_PIN(0x380, 0x788), - MX51_PIN_DISP2_DAT12 = _MXC_BUILD_NON_GPIO_PIN(0x384, 0x78C), - MX51_PIN_DISP2_DAT13 = _MXC_BUILD_NON_GPIO_PIN(0x388, 0x790), - MX51_PIN_DISP2_DAT14 = _MXC_BUILD_NON_GPIO_PIN(0x38C, 0x794), - MX51_PIN_DISP2_DAT15 = _MXC_BUILD_NON_GPIO_PIN(0x390, 0x798), - MX51_PIN_SD1_CMD = _MXC_BUILD_NON_GPIO_PIN(0x394, 0x79C), - MX51_PIN_SD1_CLK = _MXC_BUILD_NON_GPIO_PIN(0x398, 0x7A0), - MX51_PIN_SD1_DATA0 = _MXC_BUILD_NON_GPIO_PIN(0x39C, 0x7A4), - MX51_PIN_SD1_DATA1 = _MXC_BUILD_NON_GPIO_PIN(0x3A0, 0x7A8), - MX51_PIN_SD1_DATA2 = _MXC_BUILD_NON_GPIO_PIN(0x3A4, 0x7AC), - MX51_PIN_SD1_DATA3 = _MXC_BUILD_NON_GPIO_PIN(0x3A8, 0x7B0), - MX51_PIN_GPIO1_0 = _MXC_BUILD_GPIO_PIN(0, 0, 1, 0x3AC, 0x7B4), - MX51_PIN_GPIO1_1 = _MXC_BUILD_GPIO_PIN(0, 1, 1, 0x3B0, 0x7B8), - MX51_PIN_SD2_CMD = _MXC_BUILD_NON_GPIO_PIN(0x3B4, 0x7BC), - MX51_PIN_SD2_CLK = _MXC_BUILD_NON_GPIO_PIN(0x3B8, 0x7C0), - MX51_PIN_SD2_DATA0 = _MXC_BUILD_NON_GPIO_PIN(0x3BC, 0x7C4), - MX51_PIN_SD2_DATA1 = _MXC_BUILD_NON_GPIO_PIN(0x3C0, 0x7C8), - MX51_PIN_SD2_DATA2 = _MXC_BUILD_NON_GPIO_PIN(0x3C4, 0x7CC), - MX51_PIN_SD2_DATA3 = _MXC_BUILD_NON_GPIO_PIN(0x3C8, 0x7D0), - MX51_PIN_GPIO1_2 = _MXC_BUILD_GPIO_PIN(0, 2, 0, 0x3CC, 0x7D4), - MX51_PIN_GPIO1_3 = _MXC_BUILD_GPIO_PIN(0, 3, 0, 0x3D0, 0x7D8), - MX51_PIN_PMIC_INT_REQ = _MXC_BUILD_NON_GPIO_PIN(0x3D4, 0x7FC), - MX51_PIN_GPIO1_4 = _MXC_BUILD_GPIO_PIN(0, 4, 0, 0x3D8, 0x804), - MX51_PIN_GPIO1_5 = _MXC_BUILD_GPIO_PIN(0, 5, 0, 0x3DC, 0x808), - MX51_PIN_GPIO1_6 = _MXC_BUILD_GPIO_PIN(0, 6, 0, 0x3E0, 0x80C), - MX51_PIN_GPIO1_7 = _MXC_BUILD_GPIO_PIN(0, 7, 0, 0x3E4, 0x810), - MX51_PIN_GPIO1_8 = _MXC_BUILD_GPIO_PIN(0, 8, 0, 0x3E8, 0x814), - MX51_PIN_GPIO1_9 = _MXC_BUILD_GPIO_PIN(0, 9, 0, 0x3EC, 0x818), - - /* The following are PADS used for drive strength */ - - MX51_PIN_CTL_GRP_DDRPKS = _MXC_BUILD_NON_GPIO_PIN(0, 0x820), - MX51_PIN_CTL_GRP_PKEDDR = _MXC_BUILD_NON_GPIO_PIN(0, 0x838), - MX51_PIN_CTL_GRP_PKEADDR = _MXC_BUILD_NON_GPIO_PIN(0, 0x890), - MX51_PIN_CTL_GRP_DDRAPKS = _MXC_BUILD_NON_GPIO_PIN(0, 0x87C), - MX51_PIN_CTL_GRP_DDRAPUS = _MXC_BUILD_NON_GPIO_PIN(0, 0x84C), - MX51_PIN_CTL_GRP_DDRPUS = _MXC_BUILD_NON_GPIO_PIN(0, 0x884), - MX51_PIN_CTL_GRP_HYSDDR0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x85C), - MX51_PIN_CTL_GRP_HYSDDR1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x864), - MX51_PIN_CTL_GRP_HYSDDR2 = _MXC_BUILD_NON_GPIO_PIN(0, 0x86C), - MX51_PIN_CTL_GRP_HYSDDR3 = _MXC_BUILD_NON_GPIO_PIN(0, 0x874), - MX51_PIN_CTL_GRP_DDR_SR_B0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x878), - MX51_PIN_CTL_GRP_DDR_SR_B1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x880), - MX51_PIN_CTL_GRP_DDR_SR_B2 = _MXC_BUILD_NON_GPIO_PIN(0, 0x88C), - MX51_PIN_CTL_GRP_DDR_SR_B4 = _MXC_BUILD_NON_GPIO_PIN(0, 0x89C), - MX51_PIN_CTL_GRP_DRAM_B0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x8A4), - MX51_PIN_CTL_GRP_DRAM_B1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x8AC), - MX51_PIN_CTL_GRP_DRAM_B2 = _MXC_BUILD_NON_GPIO_PIN(0, 0x8B8), - MX51_PIN_CTL_GRP_DRAM_B4 = _MXC_BUILD_NON_GPIO_PIN(0, 0x82C), - MX51_PIN_CTL_GRP_INMODE1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x8A0), - MX51_PIN_CTL_GRP_DDR_SR_A0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x8B0), - MX51_PIN_CTL_GRP_EMI_DS5 = _MXC_BUILD_NON_GPIO_PIN(0, 0x8B4), - MX51_PIN_CTL_GRP_DDR_SR_A1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x8BC), - MX51_PIN_CTL_GRP_DDR_A0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x83C), - MX51_PIN_CTL_GRP_DDR_A1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x848), - MX51_PIN_CTL_GRP_DISP_PKE0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x868), - MX51_PIN_CTL_DRAM_RAS = _MXC_BUILD_NON_GPIO_PIN(0, 0x4A4), - MX51_PIN_CTL_DRAM_CAS = _MXC_BUILD_NON_GPIO_PIN(0, 0x4A8), - MX51_PIN_CTL_DRAM_SDWE = _MXC_BUILD_NON_GPIO_PIN(0, 0x4Ac), - MX51_PIN_CTL_DRAM_SDCKE0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4B0), - MX51_PIN_CTL_DRAM_SDCKE1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4B4), - MX51_PIN_CTL_DRAM_SDCLK = _MXC_BUILD_NON_GPIO_PIN(0, 0x4B8), - MX51_PIN_CTL_DRAM_SDQS0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4BC), - MX51_PIN_CTL_DRAM_SDQS1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4C0), - MX51_PIN_CTL_DRAM_SDQS2 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4C4), - MX51_PIN_CTL_DRAM_SDQS3 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4C8), - MX51_PIN_CTL_DRAM_CS0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4CC), - MX51_PIN_CTL_DRAM_CS1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4D0), - MX51_PIN_CTL_DRAM_DQM0 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4D4), - MX51_PIN_CTL_DRAM_DQM1 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4D8), - MX51_PIN_CTL_DRAM_DQM2 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4DC), - MX51_PIN_CTL_DRAM_DQM3 = _MXC_BUILD_NON_GPIO_PIN(0, 0x4E0), -}; - -enum { - MX53_PIN_GPIO_19 = _MXC_BUILD_GPIO_PIN(3, 5, 1, 0x20, 0x348), - MX53_PIN_KEY_COL0 = _MXC_BUILD_GPIO_PIN(3, 6, 1, 0x24, 0x34C), - MX53_PIN_KEY_ROW0 = _MXC_BUILD_GPIO_PIN(3, 7, 1, 0x28, 0x350), - MX53_PIN_KEY_COL1 = _MXC_BUILD_GPIO_PIN(3, 8, 1, 0x2C, 0x354), - MX53_PIN_KEY_ROW1 = _MXC_BUILD_GPIO_PIN(3, 9, 1, 0x30, 0x358), - MX53_PIN_KEY_COL2 = _MXC_BUILD_GPIO_PIN(3, 10, 1, 0x34, 0x35C), - MX53_PIN_KEY_ROW2 = _MXC_BUILD_GPIO_PIN(3, 11, 1, 0x38, 0x360), - MX53_PIN_KEY_COL3 = _MXC_BUILD_GPIO_PIN(3, 12, 1, 0x3C, 0x364), - MX53_PIN_KEY_ROW3 = _MXC_BUILD_GPIO_PIN(3, 13, 1, 0x40, 0x368), - MX53_PIN_KEY_COL4 = _MXC_BUILD_GPIO_PIN(3, 14, 1, 0x44, 0x36C), - MX53_PIN_KEY_ROW4 = _MXC_BUILD_GPIO_PIN(3, 15, 1, 0x48, 0x370), - MX53_PIN_NVCC_KEYPAD = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x374), - MX53_PIN_DI0_DISP_CLK = _MXC_BUILD_GPIO_PIN(3, 16, 1, 0x4C, 0x378), - MX53_PIN_DI0_PIN15 = _MXC_BUILD_GPIO_PIN(3, 17, 1, 0x50, 0x37C), - MX53_PIN_DI0_PIN2 = _MXC_BUILD_GPIO_PIN(3, 18, 1, 0x54, 0x380), - MX53_PIN_DI0_PIN3 = _MXC_BUILD_GPIO_PIN(3, 19, 1, 0x58, 0x384), - MX53_PIN_DI0_PIN4 = _MXC_BUILD_GPIO_PIN(3, 20, 1, 0x5C, 0x388), - MX53_PIN_DISP0_DAT0 = _MXC_BUILD_GPIO_PIN(3, 21, 1, 0x60, 0x38C), - MX53_PIN_DISP0_DAT1 = _MXC_BUILD_GPIO_PIN(3, 22, 1, 0x64, 0x390), - MX53_PIN_DISP0_DAT2 = _MXC_BUILD_GPIO_PIN(3, 23, 1, 0x68, 0x394), - MX53_PIN_DISP0_DAT3 = _MXC_BUILD_GPIO_PIN(3, 24, 1, 0x6C, 0x398), - MX53_PIN_DISP0_DAT4 = _MXC_BUILD_GPIO_PIN(3, 25, 1, 0x70, 0x39C), - MX53_PIN_DISP0_DAT5 = _MXC_BUILD_GPIO_PIN(3, 26, 1, 0x74, 0x3A0), - MX53_PIN_DISP0_DAT6 = _MXC_BUILD_GPIO_PIN(3, 27, 1, 0x78, 0x3A4), - MX53_PIN_DISP0_DAT7 = _MXC_BUILD_GPIO_PIN(3, 28, 1, 0x7C, 0x3A8), - MX53_PIN_DISP0_DAT8 = _MXC_BUILD_GPIO_PIN(3, 29, 1, 0x80, 0x3AC), - MX53_PIN_DISP0_DAT9 = _MXC_BUILD_GPIO_PIN(3, 30, 1, 0x84, 0x3B0), - MX53_PIN_DISP0_DAT10 = _MXC_BUILD_GPIO_PIN(3, 31, 1, 0x88, 0x3B4), - MX53_PIN_DISP0_DAT11 = _MXC_BUILD_GPIO_PIN(4, 5, 1, 0x8C, 0x3B8), - MX53_PIN_DISP0_DAT12 = _MXC_BUILD_GPIO_PIN(4, 6, 1, 0x90, 0x3BC), - MX53_PIN_DISP0_DAT13 = _MXC_BUILD_GPIO_PIN(4, 7, 1, 0x94, 0x3C0), - MX53_PIN_DISP0_DAT14 = _MXC_BUILD_GPIO_PIN(4, 8, 1, 0x98, 0x3C4), - MX53_PIN_DISP0_DAT15 = _MXC_BUILD_GPIO_PIN(4, 9, 1, 0x9C, 0x3C8), - MX53_PIN_DISP0_DAT16 = _MXC_BUILD_GPIO_PIN(4, 10, 1, 0xA0, 0x3CC), - MX53_PIN_DISP0_DAT17 = _MXC_BUILD_GPIO_PIN(4, 11, 1, 0xA4, 0x3D0), - MX53_PIN_DISP0_DAT18 = _MXC_BUILD_GPIO_PIN(4, 12, 1, 0xA8, 0x3D4), - MX53_PIN_DISP0_DAT19 = _MXC_BUILD_GPIO_PIN(4, 13, 1, 0xAC, 0x3D8), - MX53_PIN_DISP0_DAT20 = _MXC_BUILD_GPIO_PIN(4, 14, 1, 0xB0, 0x3DC), - MX53_PIN_DISP0_DAT21 = _MXC_BUILD_GPIO_PIN(4, 15, 1, 0xB4, 0x3E0), - MX53_PIN_DISP0_DAT22 = _MXC_BUILD_GPIO_PIN(4, 16, 1, 0xB8, 0x3E4), - MX53_PIN_DISP0_DAT23 = _MXC_BUILD_GPIO_PIN(4, 17, 1, 0xBC, 0x3E8), - MX53_PIN_CSI0_PIXCLK = _MXC_BUILD_GPIO_PIN(4, 18, 1, 0xC0, 0x3EC), - MX53_PIN_CSI0_MCLK = _MXC_BUILD_GPIO_PIN(4, 19, 1, 0xC4, 0x3F0), - MX53_PIN_CSI0_DATA_EN = _MXC_BUILD_GPIO_PIN(4, 20, 1, 0xC8, 0x3F4), - MX53_PIN_CSI0_VSYNC = _MXC_BUILD_GPIO_PIN(4, 21, 1, 0xCC, 0x3F8), - MX53_PIN_CSI0_D4 = _MXC_BUILD_GPIO_PIN(4, 22, 1, 0xD0, 0x3FC), - MX53_PIN_CSI0_D5 = _MXC_BUILD_GPIO_PIN(4, 23, 1, 0xD4, 0x400), - MX53_PIN_CSI0_D6 = _MXC_BUILD_GPIO_PIN(4, 24, 1, 0xD8, 0x404), - MX53_PIN_CSI0_D7 = _MXC_BUILD_GPIO_PIN(4, 25, 1, 0xDC, 0x408), - MX53_PIN_CSI0_D8 = _MXC_BUILD_GPIO_PIN(4, 26, 1, 0xE0, 0x40C), - MX53_PIN_CSI0_D9 = _MXC_BUILD_GPIO_PIN(4, 27, 1, 0xE4, 0x410), - MX53_PIN_CSI0_D10 = _MXC_BUILD_GPIO_PIN(4, 28, 1, 0xE8, 0x414), - MX53_PIN_CSI0_D11 = _MXC_BUILD_GPIO_PIN(4, 29, 1, 0xEC, 0x418), - MX53_PIN_CSI0_D12 = _MXC_BUILD_GPIO_PIN(4, 30, 1, 0xF0, 0x41C), - MX53_PIN_CSI0_D13 = _MXC_BUILD_GPIO_PIN(4, 31, 1, 0xF4, 0x420), - MX53_PIN_CSI0_D14 = _MXC_BUILD_GPIO_PIN(5, 0, 1, 0xF8, 0x424), - MX53_PIN_CSI0_D15 = _MXC_BUILD_GPIO_PIN(5, 1, 1, 0xFC, 0x428), - MX53_PIN_CSI0_D16 = _MXC_BUILD_GPIO_PIN(5, 2, 1, 0x100, 0x42C), - MX53_PIN_CSI0_D17 = _MXC_BUILD_GPIO_PIN(5, 3, 1, 0x104, 0x430), - MX53_PIN_CSI0_D18 = _MXC_BUILD_GPIO_PIN(5, 4, 1, 0x108, 0x434), - MX53_PIN_CSI0_D19 = _MXC_BUILD_GPIO_PIN(5, 5, 1, 0x10C, 0x438), - MX53_PIN_NVCC_CSI0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x43C), - MX53_PIN_JTAG_TMS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x440), - MX53_PIN_JTAG_MOD = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x444), - MX53_PIN_JTAG_TRSTB = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x448), - MX53_PIN_JTAG_TDI = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x44C), - MX53_PIN_JTAG_TCK = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x450), - MX53_PIN_JTAG_TDO = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x454), - MX53_PIN_EIM_A25 = _MXC_BUILD_GPIO_PIN(4, 2, 1, 0x110, 0x458), - MX53_PIN_EIM_EB2 = _MXC_BUILD_GPIO_PIN(1, 30, 1, 0x114, 0x45C), - MX53_PIN_EIM_D16 = _MXC_BUILD_GPIO_PIN(2, 16, 1, 0x118, 0x460), - MX53_PIN_EIM_D17 = _MXC_BUILD_GPIO_PIN(2, 17, 1, 0x11C, 0x464), - MX53_PIN_EIM_D18 = _MXC_BUILD_GPIO_PIN(2, 18, 1, 0x120, 0x468), - MX53_PIN_EIM_D19 = _MXC_BUILD_GPIO_PIN(2, 19, 1, 0x124, 0x46C), - MX53_PIN_EIM_D20 = _MXC_BUILD_GPIO_PIN(2, 20, 1, 0x128, 0x470), - MX53_PIN_EIM_D21 = _MXC_BUILD_GPIO_PIN(2, 21, 1, 0x12C, 0x474), - MX53_PIN_EIM_D22 = _MXC_BUILD_GPIO_PIN(2, 22, 1, 0x130, 0x478), - MX53_PIN_EIM_D23 = _MXC_BUILD_GPIO_PIN(2, 23, 1, 0x134, 0x47C), - MX53_PIN_EIM_EB3 = _MXC_BUILD_GPIO_PIN(1, 31, 1, 0x138, 0x480), - MX53_PIN_EIM_D24 = _MXC_BUILD_GPIO_PIN(2, 24, 1, 0x13C, 0x484), - MX53_PIN_EIM_D25 = _MXC_BUILD_GPIO_PIN(2, 25, 1, 0x140, 0x488), - MX53_PIN_EIM_D26 = _MXC_BUILD_GPIO_PIN(2, 26, 1, 0x144, 0x48C), - MX53_PIN_EIM_D27 = _MXC_BUILD_GPIO_PIN(2, 27, 1, 0x148, 0x490), - MX53_PIN_EIM_D28 = _MXC_BUILD_GPIO_PIN(2, 28, 1, 0x14C, 0x494), - MX53_PIN_EIM_D29 = _MXC_BUILD_GPIO_PIN(2, 29, 1, 0x150, 0x498), - MX53_PIN_EIM_D30 = _MXC_BUILD_GPIO_PIN(2, 30, 1, 0x154, 0x49C), - MX53_PIN_EIM_D31 = _MXC_BUILD_GPIO_PIN(2, 31, 1, 0x158, 0x4A0), - MX53_PIN_NVCC_EIM1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x4A4), - MX53_PIN_EIM_A24 = _MXC_BUILD_GPIO_PIN(4, 4, 1, 0x15C, 0x4A8), - MX53_PIN_EIM_A23 = _MXC_BUILD_GPIO_PIN(5, 6, 1, 0x160, 0x4AC), - MX53_PIN_EIM_A22 = _MXC_BUILD_GPIO_PIN(1, 16, 1, 0x164, 0x4B0), - MX53_PIN_EIM_A21 = _MXC_BUILD_GPIO_PIN(1, 17, 1, 0x168, 0x4B4), - MX53_PIN_EIM_A20 = _MXC_BUILD_GPIO_PIN(1, 18, 1, 0x16C, 0x4B8), - MX53_PIN_EIM_A19 = _MXC_BUILD_GPIO_PIN(1, 19, 1, 0x170, 0x4BC), - MX53_PIN_EIM_A18 = _MXC_BUILD_GPIO_PIN(1, 20, 1, 0x174, 0x4C0), - MX53_PIN_EIM_A17 = _MXC_BUILD_GPIO_PIN(1, 21, 1, 0x178, 0x4C4), - MX53_PIN_EIM_A16 = _MXC_BUILD_GPIO_PIN(1, 22, 1, 0x17C, 0x4C8), - MX53_PIN_EIM_CS0 = _MXC_BUILD_GPIO_PIN(1, 23, 1, 0x180, 0x4CC), - MX53_PIN_EIM_CS1 = _MXC_BUILD_GPIO_PIN(1, 24, 1, 0x184, 0x4D0), - MX53_PIN_EIM_OE = _MXC_BUILD_GPIO_PIN(1, 25, 1, 0x188, 0x4D4), - MX53_PIN_EIM_RW = _MXC_BUILD_GPIO_PIN(1, 26, 1, 0x18C, 0x4D8), - MX53_PIN_EIM_LBA = _MXC_BUILD_GPIO_PIN(1, 27, 1, 0x190, 0x4DC), - MX53_PIN_NVCC_EIM4 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x4E0), - MX53_PIN_EIM_EB0 = _MXC_BUILD_GPIO_PIN(1, 28, 1, 0x194, 0x4E4), - MX53_PIN_EIM_EB1 = _MXC_BUILD_GPIO_PIN(1, 29, 1, 0x198, 0x4E8), - MX53_PIN_EIM_DA0 = _MXC_BUILD_GPIO_PIN(2, 0, 1, 0x19C, 0x4EC), - MX53_PIN_EIM_DA1 = _MXC_BUILD_GPIO_PIN(2, 1, 1, 0x1A0, 0x4F0), - MX53_PIN_EIM_DA2 = _MXC_BUILD_GPIO_PIN(2, 2, 1, 0x1A4, 0x4F4), - MX53_PIN_EIM_DA3 = _MXC_BUILD_GPIO_PIN(2, 3, 1, 0x1A8, 0x4F8), - MX53_PIN_EIM_DA4 = _MXC_BUILD_GPIO_PIN(2, 4, 1, 0x1AC, 0x4FC), - MX53_PIN_EIM_DA5 = _MXC_BUILD_GPIO_PIN(2, 5, 1, 0x1B0, 0x500), - MX53_PIN_EIM_DA6 = _MXC_BUILD_GPIO_PIN(2, 6, 1, 0x1B4, 0x504), - MX53_PIN_EIM_DA7 = _MXC_BUILD_GPIO_PIN(2, 7, 1, 0x1B8, 0x508), - MX53_PIN_EIM_DA8 = _MXC_BUILD_GPIO_PIN(2, 8, 1, 0x1BC, 0x50C), - MX53_PIN_EIM_DA9 = _MXC_BUILD_GPIO_PIN(2, 9, 1, 0x1C0, 0x510), - MX53_PIN_EIM_DA10 = _MXC_BUILD_GPIO_PIN(2, 10, 1, 0x1C4, 0x514), - MX53_PIN_EIM_DA11 = _MXC_BUILD_GPIO_PIN(2, 11, 1, 0x1C8, 0x518), - MX53_PIN_EIM_DA12 = _MXC_BUILD_GPIO_PIN(2, 12, 1, 0x1CC, 0x51C), - MX53_PIN_EIM_DA13 = _MXC_BUILD_GPIO_PIN(2, 13, 1, 0x1D0, 0x520), - MX53_PIN_EIM_DA14 = _MXC_BUILD_GPIO_PIN(2, 14, 1, 0x1D4, 0x524), - MX53_PIN_EIM_DA15 = _MXC_BUILD_GPIO_PIN(2, 15, 1, 0x1D8, 0x528), - MX53_PIN_NANDF_WE_B = _MXC_BUILD_GPIO_PIN(5, 12, 1, 0x1DC, 0x52C), - MX53_PIN_NANDF_RE_B = _MXC_BUILD_GPIO_PIN(5, 13, 1, 0x1E0, 0x530), - MX53_PIN_EIM_WAIT = _MXC_BUILD_GPIO_PIN(4, 0, 1, 0x1E4, 0x534), - MX53_PIN_EIM_BCLK = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x538), - MX53_PIN_NVCC_EIM7 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x53C), - MX53_PIN_LVDS1_TX3_P = _MXC_BUILD_GPIO_PIN(5, 22, 0, 0x1EC, NON_PAD_I), - MX53_PIN_LVDS1_TX2_P = _MXC_BUILD_GPIO_PIN(5, 24, 0, 0x1F0, NON_PAD_I), - MX53_PIN_LVDS1_CLK_P = _MXC_BUILD_GPIO_PIN(5, 26, 0, 0x1F4, NON_PAD_I), - MX53_PIN_LVDS1_TX1_P = _MXC_BUILD_GPIO_PIN(5, 28, 0, 0x1F8, NON_PAD_I), - MX53_PIN_LVDS1_TX0_P = _MXC_BUILD_GPIO_PIN(5, 30, 0, 0x1FC, NON_PAD_I), - MX53_PIN_LVDS0_TX3_P = _MXC_BUILD_GPIO_PIN(6, 22, 0, 0x200, NON_PAD_I), - MX53_PIN_LVDS0_CLK_P = _MXC_BUILD_GPIO_PIN(6, 24, 0, 0x204, NON_PAD_I), - MX53_PIN_LVDS0_TX2_P = _MXC_BUILD_GPIO_PIN(6, 26, 0, 0x208, NON_PAD_I), - MX53_PIN_LVDS0_TX1_P = _MXC_BUILD_GPIO_PIN(6, 28, 0, 0x20C, NON_PAD_I), - MX53_PIN_LVDS0_TX0_P = _MXC_BUILD_GPIO_PIN(6, 30, 0, 0x210, NON_PAD_I), - MX53_PIN_GPIO_10 = _MXC_BUILD_GPIO_PIN(3, 0, 0, 0x214, 0x540), - MX53_PIN_GPIO_11 = _MXC_BUILD_GPIO_PIN(3, 1, 0, 0x218, 0x544), - MX53_PIN_GPIO_12 = _MXC_BUILD_GPIO_PIN(3, 2, 0, 0x21C, 0x548), - MX53_PIN_GPIO_13 = _MXC_BUILD_GPIO_PIN(3, 3, 0, 0x220, 0x54C), - MX53_PIN_GPIO_14 = _MXC_BUILD_GPIO_PIN(3, 4, 0, 0x224, 0x550), - MX53_PIN_DRAM_DQM3 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x554), - MX53_PIN_DRAM_SDQS3 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x558), - MX53_PIN_DRAM_SDCKE1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x55C), - MX53_PIN_DRAM_DQM2 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x560), - MX53_PIN_DRAM_SDODT1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x564), - MX53_PIN_DRAM_SDQS2 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x568), - MX53_PIN_DRAM_RESET = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x56C), - MX53_PIN_DRAM_SDCLK1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x570), - MX53_PIN_DRAM_CAS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x574), - MX53_PIN_DRAM_SDCLK0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x578), - MX53_PIN_DRAM_SDQS0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x57C), - MX53_PIN_DRAM_SDODT0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x580), - MX53_PIN_DRAM_DQM0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x584), - MX53_PIN_DRAM_RAS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x588), - MX53_PIN_DRAM_SDCKE0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x58C), - MX53_PIN_DRAM_SDQS1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x590), - MX53_PIN_DRAM_DQM1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x594), - MX53_PIN_PMIC_ON_REQ = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x598), - MX53_PIN_PMIC_STBY_REQ = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x59C), - MX53_PIN_NANDF_CLE = _MXC_BUILD_GPIO_PIN(5, 7, 1, 0x228, 0x5A0), - MX53_PIN_NANDF_ALE = _MXC_BUILD_GPIO_PIN(5, 8 , 1, 0x22C, 0x5A4), - MX53_PIN_NANDF_WP_B = _MXC_BUILD_GPIO_PIN(5, 9, 1, 0x230, 0x5A8), - MX53_PIN_NANDF_RB0 = _MXC_BUILD_GPIO_PIN(5, 10, 1, 0x234, 0x5AC), - MX53_PIN_NANDF_CS0 = _MXC_BUILD_GPIO_PIN(5, 11, 1, 0x238, 0x5B0), - MX53_PIN_NANDF_CS1 = _MXC_BUILD_GPIO_PIN(5, 14, 1, 0x23C, 0x5B4), - MX53_PIN_NANDF_CS2 = _MXC_BUILD_GPIO_PIN(5, 15, 1, 0x240, 0x5B8), - MX53_PIN_NANDF_CS3 = _MXC_BUILD_GPIO_PIN(5, 16, 1, 0x244, 0x5BC), - MX53_PIN_NVCC_NANDF = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x5C0), - MX53_PIN_FEC_MDIO = _MXC_BUILD_GPIO_PIN(0, 22, 1, 0x248, 0x5C4), - MX53_PIN_FEC_REF_CLK = _MXC_BUILD_GPIO_PIN(0, 23, 1, 0x24C, 0x5C8), - MX53_PIN_FEC_RX_ER = _MXC_BUILD_GPIO_PIN(0, 24, 1, 0x250, 0x5CC), - MX53_PIN_FEC_CRS_DV = _MXC_BUILD_GPIO_PIN(0, 25, 1, 0x254, 0x5D0), - MX53_PIN_FEC_RXD1 = _MXC_BUILD_GPIO_PIN(0, 26, 1, 0x258, 0x5D4), - MX53_PIN_FEC_RXD0 = _MXC_BUILD_GPIO_PIN(0, 27, 1, 0x25C, 0x5D8), - MX53_PIN_FEC_TX_EN = _MXC_BUILD_GPIO_PIN(0, 28, 1, 0x260, 0x5DC), - MX53_PIN_FEC_TXD1 = _MXC_BUILD_GPIO_PIN(0, 29, 1, 0x264, 0x5E0), - MX53_PIN_FEC_TXD0 = _MXC_BUILD_GPIO_PIN(0, 30, 1, 0x268, 0x5E4), - MX53_PIN_FEC_MDC = _MXC_BUILD_GPIO_PIN(0, 31, 1, 0x26C, 0x5E8), - MX53_PIN_NVCC_FEC = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x5EC), - MX53_PIN_ATA_DIOW = _MXC_BUILD_GPIO_PIN(5, 17, 1, 0x270, 0x5F0), - MX53_PIN_ATA_DMACK = _MXC_BUILD_GPIO_PIN(5, 18, 1, 0x274, 0x5F4), - MX53_PIN_ATA_DMARQ = _MXC_BUILD_GPIO_PIN(6, 0, 1, 0x278, 0x5F8), - MX53_PIN_ATA_BUFFER_EN = _MXC_BUILD_GPIO_PIN(6, 1, 1, 0x27C, 0x5FC), - MX53_PIN_ATA_INTRQ = _MXC_BUILD_GPIO_PIN(6, 2, 1, 0x280, 0x600), - MX53_PIN_ATA_DIOR = _MXC_BUILD_GPIO_PIN(6, 3, 1, 0x284, 0x604), - MX53_PIN_ATA_RESET_B = _MXC_BUILD_GPIO_PIN(6, 4, 1, 0x288, 0x608), - MX53_PIN_ATA_IORDY = _MXC_BUILD_GPIO_PIN(6, 5, 1, 0x28C, 0x60C), - MX53_PIN_ATA_DA_0 = _MXC_BUILD_GPIO_PIN(6, 6, 1, 0x290, 0x610), - MX53_PIN_ATA_DA_1 = _MXC_BUILD_GPIO_PIN(6, 7, 1, 0x294, 0x614), - MX53_PIN_ATA_DA_2 = _MXC_BUILD_GPIO_PIN(6, 8, 1, 0x298, 0x618), - MX53_PIN_ATA_CS_0 = _MXC_BUILD_GPIO_PIN(6, 9, 1, 0x29C, 0x61C), - MX53_PIN_ATA_CS_1 = _MXC_BUILD_GPIO_PIN(6, 10, 1, 0x2A0, 0x620), - MX53_PIN_NVCC_ATA2 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x624), - MX53_PIN_ATA_DATA0 = _MXC_BUILD_GPIO_PIN(1, 0, 1, 0x2A4, 0x628), - MX53_PIN_ATA_DATA1 = _MXC_BUILD_GPIO_PIN(1, 1, 1, 0x2A8, 0x62C), - MX53_PIN_ATA_DATA2 = _MXC_BUILD_GPIO_PIN(1, 2, 1, 0x2AC, 0x630), - MX53_PIN_ATA_DATA3 = _MXC_BUILD_GPIO_PIN(1, 3, 1, 0x2B0, 0x634), - MX53_PIN_ATA_DATA4 = _MXC_BUILD_GPIO_PIN(1, 4, 1, 0x2B4, 0x638), - MX53_PIN_ATA_DATA5 = _MXC_BUILD_GPIO_PIN(1, 5, 1, 0x2B8, 0x63C), - MX53_PIN_ATA_DATA6 = _MXC_BUILD_GPIO_PIN(1, 6, 1, 0x2BC, 0x640), - MX53_PIN_ATA_DATA7 = _MXC_BUILD_GPIO_PIN(1, 7, 1, 0x2C0, 0x644), - MX53_PIN_ATA_DATA8 = _MXC_BUILD_GPIO_PIN(1, 8, 1, 0x2C4, 0x648), - MX53_PIN_ATA_DATA9 = _MXC_BUILD_GPIO_PIN(1, 9, 1, 0x2C8, 0x64C), - MX53_PIN_ATA_DATA10 = _MXC_BUILD_GPIO_PIN(1, 10, 1, 0x2CC, 0x650), - MX53_PIN_ATA_DATA11 = _MXC_BUILD_GPIO_PIN(1, 11, 1, 0x2D0, 0x654), - MX53_PIN_ATA_DATA12 = _MXC_BUILD_GPIO_PIN(1, 12, 1, 0x2D4, 0x658), - MX53_PIN_ATA_DATA13 = _MXC_BUILD_GPIO_PIN(1, 13, 1, 0x2D8, 0x65C), - MX53_PIN_ATA_DATA14 = _MXC_BUILD_GPIO_PIN(1, 14, 1, 0x2DC, 0x660), - MX53_PIN_ATA_DATA15 = _MXC_BUILD_GPIO_PIN(1, 15, 1, 0x2E0, 0x664), - MX53_PIN_NVCC_ATA0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x668), - MX53_PIN_SD1_DATA0 = _MXC_BUILD_GPIO_PIN(0, 16, 1, 0x2E4, 0x66C), - MX53_PIN_SD1_DATA1 = _MXC_BUILD_GPIO_PIN(0, 17, 1, 0x2E8, 0x670), - MX53_PIN_SD1_CMD = _MXC_BUILD_GPIO_PIN(0, 18, 1, 0x2EC, 0x674), - MX53_PIN_SD1_DATA2 = _MXC_BUILD_GPIO_PIN(0, 19, 1, 0x2F0, 0x678), - MX53_PIN_SD1_CLK = _MXC_BUILD_GPIO_PIN(0, 20, 1, 0x2F4, 0x67C), - MX53_PIN_SD1_DATA3 = _MXC_BUILD_GPIO_PIN(0, 21, 1, 0x2F8, 0x680), - MX53_PIN_NVCC_SD1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x684), - MX53_PIN_SD2_CLK = _MXC_BUILD_GPIO_PIN(0, 10, 1, 0x2FC, 0x688), - MX53_PIN_SD2_CMD = _MXC_BUILD_GPIO_PIN(0, 11, 1, 0x300, 0x68C), - MX53_PIN_SD2_DATA3 = _MXC_BUILD_GPIO_PIN(0, 12, 1, 0x304, 0x690), - MX53_PIN_SD2_DATA2 = _MXC_BUILD_GPIO_PIN(0, 13, 1, 0x308, 0x694), - MX53_PIN_SD2_DATA1 = _MXC_BUILD_GPIO_PIN(0, 14, 1, 0x30C, 0x698), - MX53_PIN_SD2_DATA0 = _MXC_BUILD_GPIO_PIN(0, 15, 1, 0x310, 0x69C), - MX53_PIN_NVCC_SD2 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6A0), - MX53_PIN_GPIO_0 = _MXC_BUILD_GPIO_PIN(0, 0, 1, 0x314, 0x6A4), - MX53_PIN_GPIO_1 = _MXC_BUILD_GPIO_PIN(0, 1, 1, 0x318, 0x6A8), - MX53_PIN_GPIO_9 = _MXC_BUILD_GPIO_PIN(0, 9, 1, 0x31C, 0x6AC), - MX53_PIN_GPIO_3 = _MXC_BUILD_GPIO_PIN(0, 3, 1, 0x320, 0x6B0), - MX53_PIN_GPIO_6 = _MXC_BUILD_GPIO_PIN(0, 6, 1, 0x324, 0x6B4), - MX53_PIN_GPIO_2 = _MXC_BUILD_GPIO_PIN(0, 2, 1, 0x328, 0x6B8), - MX53_PIN_GPIO_4 = _MXC_BUILD_GPIO_PIN(0, 4, 1, 0x32C, 0x6BC), - MX53_PIN_GPIO_5 = _MXC_BUILD_GPIO_PIN(0, 5, 1, 0x330, 0x6C0), - MX53_PIN_GPIO_7 = _MXC_BUILD_GPIO_PIN(0, 7, 1, 0x334, 0x6C4), - MX53_PIN_GPIO_8 = _MXC_BUILD_GPIO_PIN(0, 8, 1, 0x338, 0x6C8), - MX53_PIN_GPIO_16 = _MXC_BUILD_GPIO_PIN(6, 11, 1, 0x33C, 0x6CC), - MX53_PIN_GPIO_17 = _MXC_BUILD_GPIO_PIN(6, 12, 1, 0x340, 0x6D0), - MX53_PIN_GPIO_18 = _MXC_BUILD_GPIO_PIN(6, 13, 1, 0x344, 0x6D4), - MX53_PIN_NVCC_GPIO = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6D8), - MX53_PIN_POR_B = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6DC), - MX53_PIN_BOOT_MODE1 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6E0), - MX53_PIN_RESET_IN_B = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6E4), - MX53_PIN_BOOT_MODE0 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6E8), - MX53_PIN_TEST_MODE = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6EC), - MX53_PIN_GRP_ADDDS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6F0), - MX53_PIN_GRP_DDRMODE_CTL = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6F4), - MX53_PIN_GRP_DDRPKE = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x6FC), - MX53_PIN_GRP_DDRPK = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x708), - MX53_PIN_GRP_TERM_CTL3 = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x70C), - MX53_PIN_GRP_DDRHYS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x710), - MX53_PIN_GRP_DDRMODE = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x714), - MX53_PIN_GRP_B0DS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x718), - MX53_PIN_GRP_B1DS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x71C), - MX53_PIN_GRP_CTLDS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x720), - MX53_PIN_GRP_DDR_TYPE = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x724), - MX53_PIN_GRP_B2DS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x728), - MX53_PIN_GRP_B3DS = _MXC_BUILD_NON_GPIO_PIN(NON_MUX_I, 0x72C), -}; -/* various IOMUX input select register index */ -typedef enum iomux_input_select { - MX51_AUDMUX_P4_INPUT_DA_AMX_SELECT_I = 0, - MX51_AUDMUX_P4_INPUT_DB_AMX_SELECT_I, - MX51_AUDMUX_P4_INPUT_TXCLK_AMX_SELECT_INPUT, - MX51_AUDMUX_P4_INPUT_TXFS_AMX_SELECT_INPUT, - MX51_AUDMUX_P5_INPUT_DA_AMX_SELECT_INPUT, - MX51_AUDMUX_P5_INPUT_DB_AMX_SELECT_INPUT, - MX51_AUDMUX_P5_INPUT_RXCLK_AMX_SELECT_INPUT, - MX51_AUDMUX_P5_INPUT_RXFS_AMX_SELECT, - MX51_AUDMUX_P5_INPUT_TXCLK_AMX_SELECT_INPUT, - MX51_AUDMUX_P5_INPUT_TXFS_AMX_SELECT_INPUT, - MX51_AUDMUX_P6_INPUT_DA_AMX_SELECT_INPUT, - MX51_AUDMUX_P6_INPUT_DB_AMX_SELECT_INPUT, - MX51_AUDMUX_P6_INPUT_RXCLK_AMX_SELECT_INPUT, - MX51_AUDMUX_P6_INPUT_RXFS_AMX_SELECT_INPUT, - MX51_AUDMUX_P6_INPUT_TXCLK_AMX_SELECT_INPUT, - MX51_AUDMUX_P6_INPUT_TXFS_AMX_SELECT_INPUT, - MX51_CCM_IPP_DI_CLK_SELECT_INPUT, - /* TO2 */ - MX51_CCM_IPP_DI1_CLK_SELECT_INPUT, - MX51_CCM_PLL1_BYPASS_CLK_SELECT_INPUT, - MX51_CCM_PLL2_BYPASS_CLK_SELECT_INPUT, - MX51_CSPI_IPP_CSPI_CLK_IN_SELECT_INPUT, - MX51_CSPI_IPP_IND_MISO_SELECT_INPUT, - MX51_CSPI_IPP_IND_MOSI_SELECT_INPUT, - MX51_CSPI_IPP_IND_SS_B_1_SELECT_INPUT, - MX51_CSPI_IPP_IND_SS_B_2_SELECT_INPUT, - MX51_CSPI_IPP_IND_SS_B_3_SELECT_INPUT, - MX51_DPLLIP1_L1T_TOG_EN_SELECT_INPUT, - /* TO2 */ - MX51_ECSPI2_IPP_IND_SS_B_1_SELECT_INPUT, - MX51_ECSPI2_IPP_IND_SS_B_3_SELECT_INPUT, - MX51_EMI_IPP_IND_RDY_INT_SELECT_INPUT, - MX51_ESDHC3_IPP_DAT0_IN_SELECT_INPUT, - MX51_ESDHC3_IPP_DAT1_IN_SELECT_INPUT, - MX51_ESDHC3_IPP_DAT2_IN_SELECT_INPUT, - MX51_ESDHC3_IPP_DAT3_IN_SELECT_INPUT, - MX51_FEC_FEC_COL_SELECT_INPUT, - MX51_FEC_FEC_CRS_SELECT_INPUT, - MX51_FEC_FEC_MDI_SELECT_INPUT, - MX51_FEC_FEC_RDATA_0_SELECT_INPUT, - MX51_FEC_FEC_RDATA_1_SELECT_INPUT, - MX51_FEC_FEC_RDATA_2_SELECT_INPUT, - MX51_FEC_FEC_RDATA_3_SELECT_INPUT, - MX51_FEC_FEC_RX_CLK_SELECT_INPUT, - MX51_FEC_FEC_RX_DV_SELECT_INPUT, - MX51_FEC_FEC_RX_ER_SELECT_INPUT, - MX51_FEC_FEC_TX_CLK_SELECT_INPUT, - MX51_GPIO3_IPP_IND_G_IN_1_SELECT_INPUT, - MX51_GPIO3_IPP_IND_G_IN_2_SELECT_INPUT, - MX51_GPIO3_IPP_IND_G_IN_3_SELECT_INPUT, - MX51_GPIO3_IPP_IND_G_IN_4_SELECT_INPUT, - MX51_GPIO3_IPP_IND_G_IN_5_SELECT_INPUT, - MX51_GPIO3_IPP_IND_G_IN_6_SELECT_INPUT, - MX51_GPIO3_IPP_IND_G_IN_7_SELECT_INPUT, - MX51_GPIO3_IPP_IND_G_IN_8_SELECT_INPUT, - /* TO2 */ - MX51_GPIO3_IPP_IND_G_IN_12_SELECT_INPUT, - MX51_HSC_MIPI_MIX_IPP_IND_SENS1_DATA_EN_SELECT_INPUT, - MX51_HSC_MIPI_MIX_IPP_IND_SENS2_DATA_EN_SELECT_INPUT, - /* TO2 */ - MX51_HSC_MIPI_MIX_PAR_VSYNC_SELECT_INPUT, - /* TO2 */ - MX51_HSC_MIPI_MIX_PAR_DI_WAIT_SELECT_INPUT, - MX51_HSC_MIPI_MIX_PAR_SISG_TRIG_SELECT_INPUT, - MX51_I2C1_IPP_SCL_IN_SELECT_INPUT, - MX51_I2C1_IPP_SDA_IN_SELECT_INPUT, - MX51_I2C2_IPP_SCL_IN_SELECT_INPUT, - MX51_I2C2_IPP_SDA_IN_SELECT_INPUT, - MX51_IPU_IPP_DI_0_IND_DISPB_SD_D_SELECT_INPUT, - MX51_IPU_IPP_DI_1_IND_DISPB_SD_D_SELECT_INPUT, - MX51_KPP_IPP_IND_COL_6_SELECT_INPUT, - MX51_KPP_IPP_IND_COL_7_SELECT_INPUT, - MX51_KPP_IPP_IND_ROW_4_SELECT_INPUT, - MX51_KPP_IPP_IND_ROW_5_SELECT_INPUT, - MX51_KPP_IPP_IND_ROW_6_SELECT_INPUT, - MX51_KPP_IPP_IND_ROW_7_SELECT_INPUT, - MX51_UART1_IPP_UART_RTS_B_SELECT_INPUT, - MX51_UART1_IPP_UART_RXD_MUX_SELECT_INPUT, - MX51_UART2_IPP_UART_RTS_B_SELECT_INPUT, - MX51_UART2_IPP_UART_RXD_MUX_SELECT_INPUT, - MX51_UART3_IPP_UART_RTS_B_SELECT_INPUT, - MX51_UART3_IPP_UART_RXD_MUX_SELECT_INPUT, - MX51_USBOH3_IPP_IND_UH3_CLK_SELECT_INPUT, - MX51_USBOH3_IPP_IND_UH3_DATA_0_SELECT_INPUT, - MX51_USBOH3_IPP_IND_UH3_DATA_1_SELECT_INPUT, - MX51_USBOH3_IPP_IND_UH3_DATA_2_SELECT_INPUT, - MX51_USBOH3_IPP_IND_UH3_DATA_3_SELECT_INPUT, - MX51_USBOH3_IPP_IND_UH3_DATA_4_SELECT_INPUT, - MX51_USBOH3_IPP_IND_UH3_DATA_5_SELECT_INPUT, - MX51_USBOH3_IPP_IND_UH3_DATA_6_SELECT_INPUT, - MX51_USBOH3_IPP_IND_UH3_DATA_7_SELECT_INPUT, - MX51_USBOH3_IPP_IND_UH3_DIR_SELECT_INPUT, - MX51_USBOH3_IPP_IND_UH3_NXT_SELECT_INPUT, - MX51_USBOH3_IPP_IND_UH3_STP_SELECT_INPUT, - MX51PUT_NUM_MUX, - /* MX53 */ - MX53_AUDMUX_P4_INPUT_DA_AMX_SELECT_I = 0, - MX53_AUDMUX_P4_INPUT_DB_AMX_SELECT_I, - MX53_AUDMUX_P4_INPUT_RXCLK_AMX_SELECT_INPUT, - MX53_AUDMUX_P4_INPUT_RXFS_AMX_SELECT_INPUT, - MX53_AUDMUX_P4_INPUT_TXCLK_AMX_SELECT_INPUT, - MX53_AUDMUX_P4_INPUT_TXFS_AMX_SELECT_INPUT, - MX53_AUDMUX_P5_INPUT_DA_AMX_SELECT_I, - MX53_AUDMUX_P5_INPUT_DB_AMX_SELECT_I, - MX53_AUDMUX_P5_INPUT_RXCLK_AMX_SELECT_INPUT, - MX53_AUDMUX_P5_INPUT_RXFS_AMX_SELECT_INPUT, - MX53_AUDMUX_P5_INPUT_TXCLK_AMX_SELECT_INPUT, - MX53_AUDMUX_P5_INPUT_TXFS_AMX_SELECT_INPUT, - MX53_CAN1_IPP_IND_CANRX_SELECT_INPUT, - MX53_CAN2_IPP_IND_CANRX_SELECT_INPUT, - MX53_CCM_IPP_ASRC_EXT_SELECT_INPUT, - MX53_CCM_IPP_DI1_CLK_SELECT_INPUT, - MX53_CCM_PLL1_BYPASS_CLK_SELECT_INPUT, - MX53_CCM_PLL2_BYPASS_CLK_SELECT_INPUT, - MX53_CCM_PLL3_BYPASS_CLK_SELECT_INPUT, - MX53_CCM_PLL4_BYPASS_CLK_SELECT_INPUT, - MX53_CSPI_IPP_CSPI_CLK_IN_SELECT_INPUT, - MX53_CSPI_IPP_IND_MISO_SELECT_INPUT, - MX53_CSPI_IPP_IND_MOSI_SELECT_INPUT, - MX53_CSPI_IPP_IND_SS_B_0_SELECT_INPUT, - MX53_CSPI_IPP_IND_SS_B_1_SELECT_INPUT, - MX53_CSPI_IPP_IND_SS_B_2_SELECT_INPUT, - MX53_CSPI_IPP_IND_SS_B_3_SELECT_INPUT, - MX53_ECSPI1_IPP_CSPI_CLK_IN_SELECT_INPUT, - MX53_ECSPI1_IPP_IND_MISO_SELECT_INPUT, - MX53_ECSPI1_IPP_IND_MOSI_SELECT_INPUT, - MX53_ECSPI1_IPP_IND_SS_B_0_SELECT_INPUT, - MX53_ECSPI1_IPP_IND_SS_B_1_SELECT_INPUT, - MX53_ECSPI1_IPP_IND_SS_B_2_SELECT_INPUT, - MX53_ECSPI1_IPP_IND_SS_B_3_SELECT_INPUT, - MX53_ECSPI2_IPP_CSPI_CLK_IN_SELECT_INPUT, - MX53_ECSPI2_IPP_IND_MISO_SELECT_INPUT, - MX53_ECSPI2_IPP_IND_MOSI_SELECT_INPUT, - MX53_ECSPI2_IPP_IND_SS_B_0_SELECT_INPUT, - MX53_ECSPI2_IPP_IND_SS_B_1_SELECT_INPUT, - MX53_ESAI1_IPP_IND_FSR_SELECT_INPUT, - MX53_ESAI1_IPP_IND_FST_SELECT_INPUT, - MX53_ESAI1_IPP_IND_HCKR_SELECT_INPUT, - MX53_ESAI1_IPP_IND_HCKT_SELECT_INPUT, - MX53_ESAI1_IPP_IND_SCKR_SELECT_INPUT, - MX53_ESAI1_IPP_IND_SCKT_SELECT_INPUT, - MX53_ESAI1_IPP_IND_SDO0_SELECT_INPUT, - MX53_ESAI1_IPP_IND_SDO1_SELECT_INPUT, - MX53_ESAI1_IPP_IND_SDO2_SDI3_SELECT_INPUT, - MX53_ESAI1_IPP_IND_SDO3_SDI2_SELECT_INPUT, - MX53_ESAI1_IPP_IND_SDO4_SDI1_SELECT_INPUT, - MX53_ESAI1_IPP_IND_SDO5_SDI0_SELECT_INPUT, - MX53_ESDHC1_IPP_WP_ON_SELECT_INPUT, - MX53_FEC_FEC_COL_SELECT_INPUT, - MX53_FEC_FEC_MDI_SELECT_INPUT, - MX53_FEC_FEC_RX_CLK_SELECT_INPUT, - MX53_FIRI_IPP_IND_RXD_SELECT_INPUT, - MX53_GPC_PMIC_RDY_SELECT_INPUT, - MX53_I2C1_IPP_SCL_IN_SELECT_INPUT, - MX53_I2C1_IPP_SDA_IN_SELECT_INPUT, - MX53_I2C2_IPP_SCL_IN_SELECT_INPUT, - MX53_I2C2_IPP_SDA_IN_SELECT_INPUT, - MX53_I2C3_IPP_SCL_IN_SELECT_INPUT, - MX53_I2C3_IPP_SDA_IN_SELECT_INPUT, - MX53_IPU_IPP_DI_0_IND_DISPB_SD_D_SELECT_INPUT, - MX53_IPU_IPP_DI_1_IND_DISPB_SD_D_SELECT_INPUT, - MX53_IPU_IPP_IND_SENS1_DATA_EN_SELECT_INPUT, - MX53_IPU_IPP_IND_SENS1_HSYNC_SELECT_INPUT, - MX53_IPU_IPP_IND_SENS1_VSYNC_SELECT_INPUT, - MX53_KPP_IPP_IND_COL_5_SELECT_INPUT, - MX53_KPP_IPP_IND_COL_6_SELECT_INPUT, - MX53_KPP_IPP_IND_COL_7_SELECT_INPUT, - MX53_KPP_IPP_IND_ROW_5_SELECT_INPUT, - MX53_KPP_IPP_IND_ROW_6_SELECT_INPUT, - MX53_KPP_IPP_IND_ROW_7_SELECT_INPUT, - MX53_MLB_MLBCLK_IN_SELECT_INPUT, - MX53_MLB_MLBDAT_IN_SELECT_INPUT, - MX53_MLB_MLBSIG_IN_SELECT_INPUT, - MX53_OWIRE_BATTERY_LINE_IN_SELECT_INPUT, - MX53_SDMA_EVENTS_14_SELECT_INPUT, - MX53_SDMA_EVENTS_15_SELECT_INPUT, - MX53_SPDIF_SPDIF_IN1_SELECT_INPUT, - MX53_UART1_IPP_UART_RTS_B_SELECT_INPUT, - MX53_UART1_IPP_UART_RXD_MUX_SELECT_INPUT, - MX53_UART2_IPP_UART_RTS_B_SELECT_INPUT, - MX53_UART2_IPP_UART_RXD_MUX_SELECT_INPUT, - MX53_UART3_IPP_UART_RTS_B_SELECT_INPUT, - MX53_UART3_IPP_UART_RXD_MUX_SELECT_INPUT, - MX53_UART4_IPP_UART_RTS_B_SELECT_INPUT, - MX53_UART4_IPP_UART_RXD_MUX_SELECT_INPUT, - MX53_UART5_IPP_UART_RTS_B_SELECT_INPUT, - MX53_UART5_IPP_UART_RXD_MUX_SELECT_INPUT, - MX53_USBOH3_IPP_IND_OTG_OC_SELECT_INPUT, - MX53_USBOH3_IPP_IND_UH1_OC_SELECT_INPUT, - MX53_USBOH3_IPP_IND_UH2_OC_SELECT_INPUT, -} iomux_input_select_t; - -#endif /* __ASSEMBLY__ */ -#endif /* __ASM_ARCH_MX5_MX5X_PINS_H__ */ diff --git a/arch/arm/include/asm/arch-mx5/spl.h b/arch/arm/include/asm/arch-mx5/spl.h new file mode 100644 index 0000000..e0b6e3e --- /dev/null +++ b/arch/arm/include/asm/arch-mx5/spl.h @@ -0,0 +1,19 @@ +/* + * Copyright (C) 2013 Marek Vasut <marex@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#ifndef __ASM_ARCH_SPL_H__ +#define __ASM_ARCH_SPL_H__ + +#define BOOT_DEVICE_NONE 0 +#define BOOT_DEVICE_NAND 1 + +#endif /* __ASM_ARCH_SPL_H__ */ diff --git a/arch/arm/include/asm/arch-mx6/clock.h b/arch/arm/include/asm/arch-mx6/clock.h index db377cc..cfd4edc 100644 --- a/arch/arm/include/asm/arch-mx6/clock.h +++ b/arch/arm/include/asm/arch-mx6/clock.h @@ -61,6 +61,7 @@ enum mxc_clock { u32 imx_get_uartclk(void); u32 imx_get_fecclk(void); unsigned int mxc_get_clock(enum mxc_clock clk); +void enable_ocotp_clk(unsigned char enable); void enable_usboh3_clk(unsigned char enable); int enable_sata_clock(void); int enable_i2c_clk(unsigned char enable, unsigned i2c_num); diff --git a/arch/arm/include/asm/arch-mx6/crm_regs.h b/arch/arm/include/asm/arch-mx6/crm_regs.h index 7676457..aa9747c 100644 --- a/arch/arm/include/asm/arch-mx6/crm_regs.h +++ b/arch/arm/include/asm/arch-mx6/crm_regs.h @@ -20,6 +20,7 @@ #ifndef __ARCH_ARM_MACH_MX6_CCM_REGS_H__ #define __ARCH_ARM_MACH_MX6_CCM_REGS_H__ +#define CCM_CCOSR 0x020c4060 #define CCM_CCGR0 0x020C4068 #define CCM_CCGR1 0x020C406c #define CCM_CCGR2 0x020C4070 @@ -244,7 +245,12 @@ struct mxc_ccm_reg { #define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_MASK (0x7 << 8) #define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_OFFSET 6 #define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_MASK (0x3 << 6) +#ifdef CONFIG_MX6SL +#define MXC_CCM_CSCDR1_UART_CLK_PODF_MASK 0x1F +#define MXC_CCM_CSCDR1_UART_CLK_SEL (1 << 6) +#else #define MXC_CCM_CSCDR1_UART_CLK_PODF_MASK 0x3F +#endif #define MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET 0 /* Define the bits in register CS1CDR */ @@ -262,10 +268,13 @@ struct mxc_ccm_reg { /* Define the bits in register CS2CDR */ #define MXC_CCM_CS2CDR_ENFC_CLK_PODF_MASK (0x3F << 21) #define MXC_CCM_CS2CDR_ENFC_CLK_PODF_OFFSET 21 +#define MXC_CCM_CS2CDR_ENFC_CLK_PODF(v) (((v) & 0x3f) << 21) #define MXC_CCM_CS2CDR_ENFC_CLK_PRED_MASK (0x7 << 18) #define MXC_CCM_CS2CDR_ENFC_CLK_PRED_OFFSET 18 +#define MXC_CCM_CS2CDR_ENFC_CLK_PRED(v) (((v) & 0x7) << 18) #define MXC_CCM_CS2CDR_ENFC_CLK_SEL_MASK (0x3 << 16) #define MXC_CCM_CS2CDR_ENFC_CLK_SEL_OFFSET 16 +#define MXC_CCM_CS2CDR_ENFC_CLK_SEL(v) (((v) & 0x3) << 16) #define MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK (0x7 << 12) #define MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET 12 #define MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK (0x7 << 9) @@ -412,183 +421,183 @@ struct mxc_ccm_reg { #define MXC_CCM_CCGR_CG_MASK 3 #define MXC_CCM_CCGR0_AIPS_TZ1_OFFSET 0 -#define MXC_CCM_CCGR0_AIPS_TZ1_MASK (3<<MXC_CCM_CCGR0_AIPS_TZ1_OFFSET) +#define MXC_CCM_CCGR0_AIPS_TZ1_MASK (3 << MXC_CCM_CCGR0_AIPS_TZ1_OFFSET) #define MXC_CCM_CCGR0_AIPS_TZ2_OFFSET 2 -#define MXC_CCM_CCGR0_AIPS_TZ2_MASK (3<<MXC_CCM_CCGR0_AIPS_TZ2_OFFSET) -#define MXC_CCM_CCGR0_APBHDMA HCLK_OFFSET 4 -#define MXC_CCM_CCGR0_AMASK (3<<MXC_CCM_CCGR0_APBHDMA) +#define MXC_CCM_CCGR0_AIPS_TZ2_MASK (3 << MXC_CCM_CCGR0_AIPS_TZ2_OFFSET) +#define MXC_CCM_CCGR0_APBHDMA_OFFSET 4 +#define MXC_CCM_CCGR0_APBHDMA_MASK (3 << MXC_CCM_CCGR0_APBHDMA_OFFSET) #define MXC_CCM_CCGR0_ASRC_OFFSET 6 -#define MXC_CCM_CCGR0_ASRC_MASK (3<<MXC_CCM_CCGR0_ASRC_OFFSET) +#define MXC_CCM_CCGR0_ASRC_MASK (3 << MXC_CCM_CCGR0_ASRC_OFFSET) #define MXC_CCM_CCGR0_CAAM_SECURE_MEM_OFFSET 8 -#define MXC_CCM_CCGR0_CAAM_SECURE_MEM_MASK (3<<MXC_CCM_CCGR0_CAAM_SECURE_MEM_OFFSET) +#define MXC_CCM_CCGR0_CAAM_SECURE_MEM_MASK (3 << MXC_CCM_CCGR0_CAAM_SECURE_MEM_OFFSET) #define MXC_CCM_CCGR0_CAAM_WRAPPER_ACLK_OFFSET 10 -#define MXC_CCM_CCGR0_CAAM_WRAPPER_ACLK_MASK (3<<MXC_CCM_CCGR0_CAAM_WRAPPER_ACLK_OFFSET) +#define MXC_CCM_CCGR0_CAAM_WRAPPER_ACLK_MASK (3 << MXC_CCM_CCGR0_CAAM_WRAPPER_ACLK_OFFSET) #define MXC_CCM_CCGR0_CAAM_WRAPPER_IPG_OFFSET 12 -#define MXC_CCM_CCGR0_CAAM_WRAPPER_IPG_MASK (3<<MXC_CCM_CCGR0_CAAM_WRAPPER_IPG_OFFSET) +#define MXC_CCM_CCGR0_CAAM_WRAPPER_IPG_MASK (3 << MXC_CCM_CCGR0_CAAM_WRAPPER_IPG_OFFSET) #define MXC_CCM_CCGR0_CAN1_OFFSET 14 -#define MXC_CCM_CCGR0_CAN1_MASK (3<<MXC_CCM_CCGR0_CAN1_OFFSET) +#define MXC_CCM_CCGR0_CAN1_MASK (3 << MXC_CCM_CCGR0_CAN1_OFFSET) #define MXC_CCM_CCGR0_CAN1_SERIAL_OFFSET 16 -#define MXC_CCM_CCGR0_CAN1_SERIAL_MASK (3<<MXC_CCM_CCGR0_CAN1_SERIAL_OFFSET) +#define MXC_CCM_CCGR0_CAN1_SERIAL_MASK (3 << MXC_CCM_CCGR0_CAN1_SERIAL_OFFSET) #define MXC_CCM_CCGR0_CAN2_OFFSET 18 -#define MXC_CCM_CCGR0_CAN2_MASK (3<<MXC_CCM_CCGR0_CAN2_OFFSET) +#define MXC_CCM_CCGR0_CAN2_MASK (3 << MXC_CCM_CCGR0_CAN2_OFFSET) #define MXC_CCM_CCGR0_CAN2_SERIAL_OFFSET 20 -#define MXC_CCM_CCGR0_CAN2_SERIAL_MASK (3<<MXC_CCM_CCGR0_CAN2_SERIAL_OFFSET) +#define MXC_CCM_CCGR0_CAN2_SERIAL_MASK (3 << MXC_CCM_CCGR0_CAN2_SERIAL_OFFSET) #define MXC_CCM_CCGR0_CHEETAH_DBG_CLK_OFFSET 22 -#define MXC_CCM_CCGR0_CHEETAH_DBG_CLK_MASK (3<<MXC_CCM_CCGR0_CHEETAH_DBG_CLK_OFFSET) +#define MXC_CCM_CCGR0_CHEETAH_DBG_CLK_MASK (3 << MXC_CCM_CCGR0_CHEETAH_DBG_CLK_OFFSET) #define MXC_CCM_CCGR0_DCIC1_OFFSET 24 -#define MXC_CCM_CCGR0_DCIC1_MASK (3<<MXC_CCM_CCGR0_DCIC1_OFFSET) +#define MXC_CCM_CCGR0_DCIC1_MASK (3 << MXC_CCM_CCGR0_DCIC1_OFFSET) #define MXC_CCM_CCGR0_DCIC2_OFFSET 26 -#define MXC_CCM_CCGR0_DCIC2_MASK (3<<MXC_CCM_CCGR0_DCIC2_OFFSET) +#define MXC_CCM_CCGR0_DCIC2_MASK (3 << MXC_CCM_CCGR0_DCIC2_OFFSET) #define MXC_CCM_CCGR0_DTCP_OFFSET 28 -#define MXC_CCM_CCGR0_DTCP_MASK (3<<MXC_CCM_CCGR0_DTCP_OFFSET) +#define MXC_CCM_CCGR0_DTCP_MASK (3 << MXC_CCM_CCGR0_DTCP_OFFSET) #define MXC_CCM_CCGR1_ECSPI1S_OFFSET 0 -#define MXC_CCM_CCGR1_ECSPI1S_MASK (3<<MXC_CCM_CCGR1_ECSPI1S_OFFSET) +#define MXC_CCM_CCGR1_ECSPI1S_MASK (3 << MXC_CCM_CCGR1_ECSPI1S_OFFSET) #define MXC_CCM_CCGR1_ECSPI2S_OFFSET 2 -#define MXC_CCM_CCGR1_ECSPI2S_MASK (3<<MXC_CCM_CCGR1_ECSPI2S_OFFSET) +#define MXC_CCM_CCGR1_ECSPI2S_MASK (3 << MXC_CCM_CCGR1_ECSPI2S_OFFSET) #define MXC_CCM_CCGR1_ECSPI3S_OFFSET 4 -#define MXC_CCM_CCGR1_ECSPI3S_MASK (3<<MXC_CCM_CCGR1_ECSPI3S_OFFSET) +#define MXC_CCM_CCGR1_ECSPI3S_MASK (3 << MXC_CCM_CCGR1_ECSPI3S_OFFSET) #define MXC_CCM_CCGR1_ECSPI4S_OFFSET 6 -#define MXC_CCM_CCGR1_ECSPI4S_MASK (3<<MXC_CCM_CCGR1_ECSPI4S_OFFSET) +#define MXC_CCM_CCGR1_ECSPI4S_MASK (3 << MXC_CCM_CCGR1_ECSPI4S_OFFSET) #define MXC_CCM_CCGR1_ECSPI5S_OFFSET 8 -#define MXC_CCM_CCGR1_ECSPI5S_MASK (3<<MXC_CCM_CCGR1_ECSPI5S_OFFSET) +#define MXC_CCM_CCGR1_ECSPI5S_MASK (3 << MXC_CCM_CCGR1_ECSPI5S_OFFSET) #define MXC_CCM_CCGR1_ENET_CLK_ENABLE_OFFSET 10 -#define MXC_CCM_CCGR1_ENET_CLK_ENABLE_MASK (3<<MXC_CCM_CCGR1_ENET_CLK_ENABLE_OFFSET) +#define MXC_CCM_CCGR1_ENET_CLK_ENABLE_MASK (3 << MXC_CCM_CCGR1_ENET_CLK_ENABLE_OFFSET) #define MXC_CCM_CCGR1_EPIT1S_OFFSET 12 -#define MXC_CCM_CCGR1_EPIT1S_MASK (3<<MXC_CCM_CCGR1_EPIT1S_OFFSET) +#define MXC_CCM_CCGR1_EPIT1S_MASK (3 << MXC_CCM_CCGR1_EPIT1S_OFFSET) #define MXC_CCM_CCGR1_EPIT2S_OFFSET 14 -#define MXC_CCM_CCGR1_EPIT2S_MASK (3<<MXC_CCM_CCGR1_EPIT2S_OFFSET) +#define MXC_CCM_CCGR1_EPIT2S_MASK (3 << MXC_CCM_CCGR1_EPIT2S_OFFSET) #define MXC_CCM_CCGR1_ESAIS_OFFSET 16 -#define MXC_CCM_CCGR1_ESAIS_MASK (3<<MXC_CCM_CCGR1_ESAIS_OFFSET) +#define MXC_CCM_CCGR1_ESAIS_MASK (3 << MXC_CCM_CCGR1_ESAIS_OFFSET) #define MXC_CCM_CCGR1_GPT_BUS_OFFSET 20 -#define MXC_CCM_CCGR1_GPT_BUS_MASK (3<<MXC_CCM_CCGR1_GPT_BUS_OFFSET) +#define MXC_CCM_CCGR1_GPT_BUS_MASK (3 << MXC_CCM_CCGR1_GPT_BUS_OFFSET) #define MXC_CCM_CCGR1_GPT_SERIAL_OFFSET 22 -#define MXC_CCM_CCGR1_GPT_SERIAL_MASK (3<<MXC_CCM_CCGR1_GPT_SERIAL_OFFSET) +#define MXC_CCM_CCGR1_GPT_SERIAL_MASK (3 << MXC_CCM_CCGR1_GPT_SERIAL_OFFSET) #define MXC_CCM_CCGR1_GPU2D_OFFSET 24 -#define MXC_CCM_CCGR1_GPU2D_MASK (3<<MXC_CCM_CCGR1_GPU2D_OFFSET) +#define MXC_CCM_CCGR1_GPU2D_MASK (3 << MXC_CCM_CCGR1_GPU2D_OFFSET) #define MXC_CCM_CCGR1_GPU3D_OFFSET 26 -#define MXC_CCM_CCGR1_GPU3D_MASK (3<<MXC_CCM_CCGR1_GPU3D_OFFSET) +#define MXC_CCM_CCGR1_GPU3D_MASK (3 << MXC_CCM_CCGR1_GPU3D_OFFSET) #define MXC_CCM_CCGR2_HDMI_TX_IAHBCLK_OFFSET 0 -#define MXC_CCM_CCGR2_HDMI_TX_IAHBCLK_MASK (3<<MXC_CCM_CCGR2_HDMI_TX_IAHBCLK_OFFSET) +#define MXC_CCM_CCGR2_HDMI_TX_IAHBCLK_MASK (3 << MXC_CCM_CCGR2_HDMI_TX_IAHBCLK_OFFSET) #define MXC_CCM_CCGR2_HDMI_TX_ISFRCLK_OFFSET 4 -#define MXC_CCM_CCGR2_HDMI_TX_ISFRCLK_MASK (3<<MXC_CCM_CCGR2_HDMI_TX_ISFRCLK_OFFSET) +#define MXC_CCM_CCGR2_HDMI_TX_ISFRCLK_MASK (3 << MXC_CCM_CCGR2_HDMI_TX_ISFRCLK_OFFSET) #define MXC_CCM_CCGR2_I2C1_SERIAL_OFFSET 6 -#define MXC_CCM_CCGR2_I2C1_SERIAL_MASK (3<<MXC_CCM_CCGR2_I2C1_SERIAL_OFFSET) +#define MXC_CCM_CCGR2_I2C1_SERIAL_MASK (3 << MXC_CCM_CCGR2_I2C1_SERIAL_OFFSET) #define MXC_CCM_CCGR2_I2C2_SERIAL_OFFSET 8 -#define MXC_CCM_CCGR2_I2C2_SERIAL_MASK (3<<MXC_CCM_CCGR2_I2C2_SERIAL_OFFSET) +#define MXC_CCM_CCGR2_I2C2_SERIAL_MASK (3 << MXC_CCM_CCGR2_I2C2_SERIAL_OFFSET) #define MXC_CCM_CCGR2_I2C3_SERIAL_OFFSET 10 -#define MXC_CCM_CCGR2_I2C3_SERIAL_MASK (3<<MXC_CCM_CCGR2_I2C3_SERIAL_OFFSET) +#define MXC_CCM_CCGR2_I2C3_SERIAL_MASK (3 << MXC_CCM_CCGR2_I2C3_SERIAL_OFFSET) #define MXC_CCM_CCGR2_OCOTP_CTRL_OFFSET 12 -#define MXC_CCM_CCGR2_OCOTP_CTRL_MASK (3<<MXC_CCM_CCGR2_OCOTP_CTRL_OFFSET) +#define MXC_CCM_CCGR2_OCOTP_CTRL_MASK (3 << MXC_CCM_CCGR2_OCOTP_CTRL_OFFSET) #define MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_OFFSET 14 -#define MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_MASK (3<<MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_OFFSET) +#define MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_MASK (3 << MXC_CCM_CCGR2_IOMUX_IPT_CLK_IO_OFFSET) #define MXC_CCM_CCGR2_IPMUX1_OFFSET 16 -#define MXC_CCM_CCGR2_IPMUX1_MASK (3<<MXC_CCM_CCGR2_IPMUX1_OFFSET) +#define MXC_CCM_CCGR2_IPMUX1_MASK (3 << MXC_CCM_CCGR2_IPMUX1_OFFSET) #define MXC_CCM_CCGR2_IPMUX2_OFFSET 18 -#define MXC_CCM_CCGR2_IPMUX2_MASK (3<<MXC_CCM_CCGR2_IPMUX2_OFFSET) +#define MXC_CCM_CCGR2_IPMUX2_MASK (3 << MXC_CCM_CCGR2_IPMUX2_OFFSET) #define MXC_CCM_CCGR2_IPMUX3_OFFSET 20 -#define MXC_CCM_CCGR2_IPMUX3_MASK (3<<MXC_CCM_CCGR2_IPMUX3_OFFSET) +#define MXC_CCM_CCGR2_IPMUX3_MASK (3 << MXC_CCM_CCGR2_IPMUX3_OFFSET) #define MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC1_IPGS_OFFSET 22 -#define MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC1_IPGS_MASK (3<<MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC1_IPGS_OFFSET) +#define MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC1_IPGS_MASK (3 << MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC1_IPGS_OFFSET) #define MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC2_IPG_OFFSET 24 -#define MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC2_IPG_MASK (3<<MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC2_IPG_OFFSET) +#define MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC2_IPG_MASK (3 << MXC_CCM_CCGR2_IPSYNC_IP2APB_TZASC2_IPG_OFFSET) #define MXC_CCM_CCGR2_IPSYNC_VDOA_IPG_MASTER_CLK_OFFSET 26 -#define MXC_CCM_CCGR2_IPSYNC_VDOA_IPG_MASTER_CLK_MASK (3<<MXC_CCM_CCGR2_IPSYNC_VDOA_IPG_MASTER_CLK_OFFSET) +#define MXC_CCM_CCGR2_IPSYNC_VDOA_IPG_MASTER_CLK_MASK (3 << MXC_CCM_CCGR2_IPSYNC_VDOA_IPG_MASTER_CLK_OFFSET) #define MXC_CCM_CCGR3_IPU1_IPU_OFFSET 0 -#define MXC_CCM_CCGR3_IPU1_IPU_MASK (3<<MXC_CCM_CCGR3_IPU1_IPU_OFFSET) +#define MXC_CCM_CCGR3_IPU1_IPU_MASK (3 << MXC_CCM_CCGR3_IPU1_IPU_OFFSET) #define MXC_CCM_CCGR3_IPU1_IPU_DI0_OFFSET 2 -#define MXC_CCM_CCGR3_IPU1_IPU_DI0_MASK (3<<MXC_CCM_CCGR3_IPU1_IPU_DI0_OFFSET) +#define MXC_CCM_CCGR3_IPU1_IPU_DI0_MASK (3 << MXC_CCM_CCGR3_IPU1_IPU_DI0_OFFSET) #define MXC_CCM_CCGR3_IPU1_IPU_DI1_OFFSET 4 -#define MXC_CCM_CCGR3_IPU1_IPU_DI1_MASK (3<<MXC_CCM_CCGR3_IPU1_IPU_DI1_OFFSET) +#define MXC_CCM_CCGR3_IPU1_IPU_DI1_MASK (3 << MXC_CCM_CCGR3_IPU1_IPU_DI1_OFFSET) #define MXC_CCM_CCGR3_IPU2_IPU_OFFSET 6 -#define MXC_CCM_CCGR3_IPU2_IPU_MASK (3<<MXC_CCM_CCGR3_IPU2_IPU_OFFSET) +#define MXC_CCM_CCGR3_IPU2_IPU_MASK (3 << MXC_CCM_CCGR3_IPU2_IPU_OFFSET) #define MXC_CCM_CCGR3_IPU2_IPU_DI0_OFFSET 8 -#define MXC_CCM_CCGR3_IPU2_IPU_DI0_MASK (3<<MXC_CCM_CCGR3_IPU2_IPU_DI0_OFFSET) +#define MXC_CCM_CCGR3_IPU2_IPU_DI0_MASK (3 << MXC_CCM_CCGR3_IPU2_IPU_DI0_OFFSET) #define MXC_CCM_CCGR3_IPU2_IPU_DI1_OFFSET 10 -#define MXC_CCM_CCGR3_IPU2_IPU_DI1_MASK (3<<MXC_CCM_CCGR3_IPU2_IPU_DI1_OFFSET) +#define MXC_CCM_CCGR3_IPU2_IPU_DI1_MASK (3 << MXC_CCM_CCGR3_IPU2_IPU_DI1_OFFSET) #define MXC_CCM_CCGR3_LDB_DI0_OFFSET 12 -#define MXC_CCM_CCGR3_LDB_DI0_MASK (3<<MXC_CCM_CCGR3_LDB_DI0_OFFSET) +#define MXC_CCM_CCGR3_LDB_DI0_MASK (3 << MXC_CCM_CCGR3_LDB_DI0_OFFSET) #define MXC_CCM_CCGR3_LDB_DI1_OFFSET 14 -#define MXC_CCM_CCGR3_LDB_DI1_MASK (3<<MXC_CCM_CCGR3_LDB_DI1_OFFSET) +#define MXC_CCM_CCGR3_LDB_DI1_MASK (3 << MXC_CCM_CCGR3_LDB_DI1_OFFSET) #define MXC_CCM_CCGR3_MIPI_CORE_CFG_OFFSET 16 -#define MXC_CCM_CCGR3_MIPI_CORE_CFG_MASK (3<<MXC_CCM_CCGR3_MIPI_CORE_CFG_OFFSET) +#define MXC_CCM_CCGR3_MIPI_CORE_CFG_MASK (3 << MXC_CCM_CCGR3_MIPI_CORE_CFG_OFFSET) #define MXC_CCM_CCGR3_MLB_OFFSET 18 -#define MXC_CCM_CCGR3_MLB_MASK (3<<MXC_CCM_CCGR3_MLB_OFFSET) +#define MXC_CCM_CCGR3_MLB_MASK (3 << MXC_CCM_CCGR3_MLB_OFFSET) #define MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P0_OFFSET 20 -#define MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P0_MASK (3<<MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P0_OFFSET) +#define MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P0_MASK (3 << MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P0_OFFSET) #define MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P1_OFFSET 22 -#define MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P1_MASK (3<<MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P1_OFFSET) +#define MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P1_MASK (3 << MXC_CCM_CCGR3_MMDC_CORE_ACLK_FAST_CORE_P1_OFFSET) #define MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P0_OFFSET 24 -#define MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P0_MASK (3<<MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P0_OFFSET) +#define MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P0_MASK (3 << MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P0_OFFSET) #define MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P1_OFFSET 26 -#define MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P1_MASK (3<<MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P1_OFFSET) +#define MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P1_MASK (3 << MXC_CCM_CCGR3_MMDC_CORE_IPG_CLK_P1_OFFSET) #define MXC_CCM_CCGR3_OCRAM_OFFSET 28 -#define MXC_CCM_CCGR3_OCRAM_MASK (3<<MXC_CCM_CCGR3_OCRAM_OFFSET) +#define MXC_CCM_CCGR3_OCRAM_MASK (3 << MXC_CCM_CCGR3_OCRAM_OFFSET) #define MXC_CCM_CCGR3_OPENVGAXICLK_OFFSET 30 -#define MXC_CCM_CCGR3_OPENVGAXICLK_MASK (3<<MXC_CCM_CCGR3_OPENVGAXICLK_OFFSET) +#define MXC_CCM_CCGR3_OPENVGAXICLK_MASK (3 << MXC_CCM_CCGR3_OPENVGAXICLK_OFFSET) #define MXC_CCM_CCGR4_PCIE_OFFSET 0 -#define MXC_CCM_CCGR4_PCIE_MASK (3<<MXC_CCM_CCGR4_PCIE_OFFSET) +#define MXC_CCM_CCGR4_PCIE_MASK (3 << MXC_CCM_CCGR4_PCIE_OFFSET) #define MXC_CCM_CCGR4_PL301_MX6QFAST1_S133_OFFSET 8 -#define MXC_CCM_CCGR4_PL301_MX6QFAST1_S133_MASK (3<<MXC_CCM_CCGR4_PL301_MX6QFAST1_S133_OFFSET) +#define MXC_CCM_CCGR4_PL301_MX6QFAST1_S133_MASK (3 << MXC_CCM_CCGR4_PL301_MX6QFAST1_S133_OFFSET) #define MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_OFFSET 12 -#define MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK (3<<MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_OFFSET) +#define MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK (3 << MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_OFFSET) #define MXC_CCM_CCGR4_PL301_MX6QPER2_MAINCLK_ENABLE_OFFSET 14 -#define MXC_CCM_CCGR4_PL301_MX6QPER2_MAINCLK_ENABLE_MASK (3<<MXC_CCM_CCGR4_PL301_MX6QPER2_MAINCLK_ENABLE_OFFSET) +#define MXC_CCM_CCGR4_PL301_MX6QPER2_MAINCLK_ENABLE_MASK (3 << MXC_CCM_CCGR4_PL301_MX6QPER2_MAINCLK_ENABLE_OFFSET) #define MXC_CCM_CCGR4_PWM1_OFFSET 16 -#define MXC_CCM_CCGR4_PWM1_MASK (3<<MXC_CCM_CCGR4_PWM1_OFFSET) +#define MXC_CCM_CCGR4_PWM1_MASK (3 << MXC_CCM_CCGR4_PWM1_OFFSET) #define MXC_CCM_CCGR4_PWM2_OFFSET 18 -#define MXC_CCM_CCGR4_PWM2_MASK (3<<MXC_CCM_CCGR4_PWM2_OFFSET) +#define MXC_CCM_CCGR4_PWM2_MASK (3 << MXC_CCM_CCGR4_PWM2_OFFSET) #define MXC_CCM_CCGR4_PWM3_OFFSET 20 -#define MXC_CCM_CCGR4_PWM3_MASK (3<<MXC_CCM_CCGR4_PWM3_OFFSET) +#define MXC_CCM_CCGR4_PWM3_MASK (3 << MXC_CCM_CCGR4_PWM3_OFFSET) #define MXC_CCM_CCGR4_PWM4_OFFSET 22 -#define MXC_CCM_CCGR4_PWM4_MASK (3<<MXC_CCM_CCGR4_PWM4_OFFSET) +#define MXC_CCM_CCGR4_PWM4_MASK (3 << MXC_CCM_CCGR4_PWM4_OFFSET) #define MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_OFFSET 24 -#define MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK (3<<MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_OFFSET) +#define MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK (3 << MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_OFFSET) #define MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_OFFSET 26 -#define MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK (3<<MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_OFFSET) +#define MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK (3 << MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_OFFSET) #define MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_OFFSET 28 -#define MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK (3<<MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_OFFSET) +#define MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK (3 << MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_OFFSET) #define MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_OFFSET 30 -#define MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK (3<<MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_OFFSET) +#define MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK (3 << MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_OFFSET) #define MXC_CCM_CCGR5_ROM_OFFSET 0 -#define MXC_CCM_CCGR5_ROM_MASK (3<<MXC_CCM_CCGR5_ROM_OFFSET) +#define MXC_CCM_CCGR5_ROM_MASK (3 << MXC_CCM_CCGR5_ROM_OFFSET) #define MXC_CCM_CCGR5_SATA_OFFSET 4 -#define MXC_CCM_CCGR5_SATA_MASK (3<<MXC_CCM_CCGR5_SATA_OFFSET) +#define MXC_CCM_CCGR5_SATA_MASK (3 << MXC_CCM_CCGR5_SATA_OFFSET) #define MXC_CCM_CCGR5_SDMA_OFFSET 6 -#define MXC_CCM_CCGR5_SDMA_MASK (3<<MXC_CCM_CCGR5_SDMA_OFFSET) +#define MXC_CCM_CCGR5_SDMA_MASK (3 << MXC_CCM_CCGR5_SDMA_OFFSET) #define MXC_CCM_CCGR5_SPBA_OFFSET 12 -#define MXC_CCM_CCGR5_SPBA_MASK (3<<MXC_CCM_CCGR5_SPBA_OFFSET) +#define MXC_CCM_CCGR5_SPBA_MASK (3 << MXC_CCM_CCGR5_SPBA_OFFSET) #define MXC_CCM_CCGR5_SPDIF_OFFSET 14 -#define MXC_CCM_CCGR5_SPDIF_MASK (3<<MXC_CCM_CCGR5_SPDIF_OFFSET) +#define MXC_CCM_CCGR5_SPDIF_MASK (3 << MXC_CCM_CCGR5_SPDIF_OFFSET) #define MXC_CCM_CCGR5_SSI1_OFFSET 18 -#define MXC_CCM_CCGR5_SSI1_MASK (3<<MXC_CCM_CCGR5_SSI1_OFFSET) +#define MXC_CCM_CCGR5_SSI1_MASK (3 << MXC_CCM_CCGR5_SSI1_OFFSET) #define MXC_CCM_CCGR5_SSI2_OFFSET 20 -#define MXC_CCM_CCGR5_SSI2_MASK (3<<MXC_CCM_CCGR5_SSI2_OFFSET) +#define MXC_CCM_CCGR5_SSI2_MASK (3 << MXC_CCM_CCGR5_SSI2_OFFSET) #define MXC_CCM_CCGR5_SSI3_OFFSET 22 -#define MXC_CCM_CCGR5_SSI3_MASK (3<<MXC_CCM_CCGR5_SSI3_OFFSET) +#define MXC_CCM_CCGR5_SSI3_MASK (3 << MXC_CCM_CCGR5_SSI3_OFFSET) #define MXC_CCM_CCGR5_UART_OFFSET 24 -#define MXC_CCM_CCGR5_UART_MASK (3<<MXC_CCM_CCGR5_UART_OFFSET) +#define MXC_CCM_CCGR5_UART_MASK (3 << MXC_CCM_CCGR5_UART_OFFSET) #define MXC_CCM_CCGR5_UART_SERIAL_OFFSET 26 -#define MXC_CCM_CCGR5_UART_SERIAL_MASK (3<<MXC_CCM_CCGR5_UART_SERIAL_OFFSET) +#define MXC_CCM_CCGR5_UART_SERIAL_MASK (3 << MXC_CCM_CCGR5_UART_SERIAL_OFFSET) #define MXC_CCM_CCGR6_USBOH3_OFFSET 0 -#define MXC_CCM_CCGR6_USBOH3_MASK (3<<MXC_CCM_CCGR6_USBOH3_OFFSET) +#define MXC_CCM_CCGR6_USBOH3_MASK (3 << MXC_CCM_CCGR6_USBOH3_OFFSET) #define MXC_CCM_CCGR6_USDHC1_OFFSET 2 -#define MXC_CCM_CCGR6_USDHC1_MASK (3<<MXC_CCM_CCGR6_USDHC1_OFFSET) +#define MXC_CCM_CCGR6_USDHC1_MASK (3 << MXC_CCM_CCGR6_USDHC1_OFFSET) #define MXC_CCM_CCGR6_USDHC2_OFFSET 4 -#define MXC_CCM_CCGR6_USDHC2_MASK (3<<MXC_CCM_CCGR6_USDHC2_OFFSET) +#define MXC_CCM_CCGR6_USDHC2_MASK (3 << MXC_CCM_CCGR6_USDHC2_OFFSET) #define MXC_CCM_CCGR6_USDHC3_OFFSET 6 -#define MXC_CCM_CCGR6_USDHC3_MASK (3<<MXC_CCM_CCGR6_USDHC3_OFFSET) +#define MXC_CCM_CCGR6_USDHC3_MASK (3 << MXC_CCM_CCGR6_USDHC3_OFFSET) #define MXC_CCM_CCGR6_USDHC4_OFFSET 8 -#define MXC_CCM_CCGR6_USDHC4_MASK (3<<MXC_CCM_CCGR6_USDHC4_OFFSET) +#define MXC_CCM_CCGR6_USDHC4_MASK (3 << MXC_CCM_CCGR6_USDHC4_OFFSET) #define MXC_CCM_CCGR6_EMI_SLOW_OFFSET 10 -#define MXC_CCM_CCGR6_EMI_SLOW_MASK (3<<MXC_CCM_CCGR6_EMI_SLOW_OFFSET) +#define MXC_CCM_CCGR6_EMI_SLOW_MASK (3 << MXC_CCM_CCGR6_EMI_SLOW_OFFSET) #define MXC_CCM_CCGR6_VDOAXICLK_OFFSET 12 -#define MXC_CCM_CCGR6_VDOAXICLK_MASK (3<<MXC_CCM_CCGR6_VDOAXICLK_OFFSET) +#define MXC_CCM_CCGR6_VDOAXICLK_MASK (3 << MXC_CCM_CCGR6_VDOAXICLK_OFFSET) #define BM_ANADIG_PLL_SYS_LOCK 0x80000000 #define BP_ANADIG_PLL_SYS_RSVD0 20 diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h index d79ab2f..03abb2a 100644 --- a/arch/arm/include/asm/arch-mx6/imx-regs.h +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h @@ -25,6 +25,13 @@ #define ROMCP_ARB_BASE_ADDR 0x00000000 #define ROMCP_ARB_END_ADDR 0x000FFFFF + +#ifdef CONFIG_MX6SL +#define GPU_2D_ARB_BASE_ADDR 0x02200000 +#define GPU_2D_ARB_END_ADDR 0x02203FFF +#define OPENVG_ARB_BASE_ADDR 0x02204000 +#define OPENVG_ARB_END_ADDR 0x02207FFF +#else #define CAAM_ARB_BASE_ADDR 0x00100000 #define CAAM_ARB_END_ADDR 0x00103FFF #define APBH_DMA_ARB_BASE_ADDR 0x00110000 @@ -37,9 +44,19 @@ #define GPU_2D_ARB_END_ADDR 0x00137FFF #define DTCP_ARB_BASE_ADDR 0x00138000 #define DTCP_ARB_END_ADDR 0x0013BFFF +#endif /* CONFIG_MX6SL */ + +#define MXS_APBH_BASE APBH_DMA_ARB_BASE_ADDR +#define MXS_GPMI_BASE (APBH_DMA_ARB_BASE_ADDR + 0x02000) +#define MXS_BCH_BASE (APBH_DMA_ARB_BASE_ADDR + 0x04000) /* GPV - PL301 configuration ports */ +#ifdef CONFIG_MX6SL +#define GPV2_BASE_ADDR 0x00D00000 +#else #define GPV2_BASE_ADDR 0x00200000 +#endif + #define GPV3_BASE_ADDR 0x00300000 #define GPV4_BASE_ADDR 0x00800000 #define IRAM_BASE_ADDR 0x00900000 @@ -70,10 +87,17 @@ #define WEIM_ARB_BASE_ADDR 0x08000000 #define WEIM_ARB_END_ADDR 0x0FFFFFFF +#ifdef CONFIG_MX6SL +#define MMDC0_ARB_BASE_ADDR 0x80000000 +#define MMDC0_ARB_END_ADDR 0xFFFFFFFF +#define MMDC1_ARB_BASE_ADDR 0xC0000000 +#define MMDC1_ARB_END_ADDR 0xFFFFFFFF +#else #define MMDC0_ARB_BASE_ADDR 0x10000000 #define MMDC0_ARB_END_ADDR 0x7FFFFFFF #define MMDC1_ARB_BASE_ADDR 0x80000000 #define MMDC1_ARB_END_ADDR 0xFFFFFFFF +#endif #define IPU_SOC_BASE_ADDR IPU1_ARB_BASE_ADDR #define IPU_SOC_OFFSET 0x00200000 @@ -89,6 +113,16 @@ #define ECSPI2_BASE_ADDR (ATZ1_BASE_ADDR + 0x0C000) #define ECSPI3_BASE_ADDR (ATZ1_BASE_ADDR + 0x10000) #define ECSPI4_BASE_ADDR (ATZ1_BASE_ADDR + 0x14000) +#ifdef CONFIG_MX6SL +#define UART5_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x18000) +#define UART1_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x20000) +#define UART2_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x24000) +#define SSI1_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x28000) +#define SSI2_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x2C000) +#define SSI3_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x30000) +#define UART3_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x34000) +#define UART4_IPS_BASE_ADDR (ATZ1_BASE_ADDR + 0x38000) +#else #define ECSPI5_BASE_ADDR (ATZ1_BASE_ADDR + 0x18000) #define UART1_BASE (ATZ1_BASE_ADDR + 0x20000) #define ESAI1_BASE_ADDR (ATZ1_BASE_ADDR + 0x24000) @@ -96,6 +130,8 @@ #define SSI2_BASE_ADDR (ATZ1_BASE_ADDR + 0x2C000) #define SSI3_BASE_ADDR (ATZ1_BASE_ADDR + 0x30000) #define ASRC_BASE_ADDR (ATZ1_BASE_ADDR + 0x34000) +#endif + #define SPBA_BASE_ADDR (ATZ1_BASE_ADDR + 0x3C000) #define VPU_BASE_ADDR (ATZ1_BASE_ADDR + 0x40000) #define AIPS1_ON_BASE_ADDR (ATZ1_BASE_ADDR + 0x7C000) @@ -128,18 +164,35 @@ #define SRC_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x58000) #define GPC_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x5C000) #define IOMUXC_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x60000) +#ifdef CONFIG_MX6SL +#define CSI_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x64000) +#define SIPIX_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x68000) +#define SDMA_PORT_HOST_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x6C000) +#else #define DCIC1_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x64000) #define DCIC2_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x68000) #define DMA_REQ_PORT_HOST_BASE_ADDR (AIPS1_OFF_BASE_ADDR + 0x6C000) +#endif #define AIPS2_ON_BASE_ADDR (ATZ2_BASE_ADDR + 0x7C000) #define AIPS2_OFF_BASE_ADDR (ATZ2_BASE_ADDR + 0x80000) #define CAAM_BASE_ADDR (ATZ2_BASE_ADDR) #define ARM_BASE_ADDR (ATZ2_BASE_ADDR + 0x40000) +#ifdef CONFIG_MX6SL +#define USBO2H_PL301_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x0000) +#define USBO2H_USB_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x4000) +#else #define USBOH3_PL301_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x0000) #define USBOH3_USB_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x4000) +#endif + #define ENET_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x8000) +#ifdef CONFIG_MX6SL +#define MSHC_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0xC000) +#else #define MLB_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0xC000) +#endif + #define USDHC1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x10000) #define USDHC2_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x14000) #define USDHC3_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x18000) @@ -149,7 +202,12 @@ #define I2C3_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x28000) #define ROMCP_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x2C000) #define MMDC_P0_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x30000) +#ifdef CONFIG_MX6SL +#define RNGB_IPS_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x34000) +#else #define MMDC_P1_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x34000) +#endif + #define WEIM_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x38000) #define OCOTP_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x3C000) #define CSU_BASE_ADDR (AIPS2_OFF_BASE_ADDR + 0x40000) @@ -171,7 +229,6 @@ #define CHIP_REV_1_0 0x10 #define IRAM_SIZE 0x00040000 -#define IMX_IIM_BASE OCOTP_BASE_ADDR #define FEC_QUIRK_ENET_MAC #if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) @@ -200,12 +257,6 @@ struct src { u32 gpr10; }; -/* OCOTP Registers */ -struct ocotp_regs { - u32 reserved[0x198]; - u32 gp1; /* 0x660 */ -}; - /* GPR3 bitfields */ #define IOMUXC_GPR3_GPU_DBG_OFFSET 29 #define IOMUXC_GPR3_GPU_DBG_MASK (3<<IOMUXC_GPR3_GPU_DBG_OFFSET) @@ -365,14 +416,22 @@ struct cspi_regs { #define MXC_CSPICON_POL 4 #define MXC_CSPICON_PHA 0 #define MXC_CSPICON_SSPOL 12 +#ifdef CONFIG_MX6SL +#define MXC_SPI_BASE_ADDRESSES \ + ECSPI1_BASE_ADDR, \ + ECSPI2_BASE_ADDR, \ + ECSPI3_BASE_ADDR, \ + ECSPI4_BASE_ADDR +#else #define MXC_SPI_BASE_ADDRESSES \ ECSPI1_BASE_ADDR, \ ECSPI2_BASE_ADDR, \ ECSPI3_BASE_ADDR, \ ECSPI4_BASE_ADDR, \ ECSPI5_BASE_ADDR +#endif -struct iim_regs { +struct ocotp_regs { u32 ctrl; u32 ctrl_set; u32 ctrl_clr; @@ -383,9 +442,9 @@ struct iim_regs { u32 rsvd1[3]; u32 read_ctrl; u32 rsvd2[3]; - u32 fuse_data; + u32 read_fuse_data; u32 rsvd3[3]; - u32 sticky; + u32 sw_sticky; u32 rsvd4[3]; u32 scs; u32 scs_set; @@ -400,7 +459,16 @@ struct iim_regs { struct fuse_bank { u32 fuse_regs[0x20]; - } bank[15]; + } bank[16]; +}; + +struct fuse_bank0_regs { + u32 lock; + u32 rsvd0[3]; + u32 uid_low; + u32 rsvd1[3]; + u32 uid_high; + u32 rsvd2[0x17]; }; struct fuse_bank4_regs { @@ -411,7 +479,11 @@ struct fuse_bank4_regs { u32 mac_addr_low; u32 rsvd2[3]; u32 mac_addr_high; - u32 rsvd3[0x13]; + u32 rsvd3[0xb]; + u32 gp1; + u32 rsvd4[3]; + u32 gp2; + u32 rsvd5[3]; }; struct aipstz_regs { diff --git a/arch/arm/include/asm/arch-mx6/mx6-pins.h b/arch/arm/include/asm/arch-mx6/mx6-pins.h index 63f4856..ce865a6 100644 --- a/arch/arm/include/asm/arch-mx6/mx6-pins.h +++ b/arch/arm/include/asm/arch-mx6/mx6-pins.h @@ -24,7 +24,11 @@ #if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S) #include "mx6dl_pins.h" #else +#if defined(CONFIG_MX6SL) +#include "mx6sl_pins.h" +#else #error "Please select cpu" +#endif /* CONFIG_MX6SL */ #endif /* CONFIG_MX6DL or CONFIG_MX6S */ #endif /* CONFIG_MX6Q */ diff --git a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h index 9846f1b..a4134a0 100644 --- a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h +++ b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h @@ -22,33 +22,6 @@ #include <asm/imx-common/iomux-v3.h> -/* Use to set PAD control */ -#define PAD_CTL_HYS (1 << 16) -#define PAD_CTL_PUS_100K_DOWN (0 << 14) -#define PAD_CTL_PUS_47K_UP (1 << 14) -#define PAD_CTL_PUS_100K_UP (2 << 14) -#define PAD_CTL_PUS_22K_UP (3 << 14) - -#define PAD_CTL_PUE (1 << 13) -#define PAD_CTL_PKE (1 << 12) -#define PAD_CTL_ODE (1 << 11) -#define PAD_CTL_SPEED_LOW (1 << 6) -#define PAD_CTL_SPEED_MED (2 << 6) -#define PAD_CTL_SPEED_HIGH (3 << 6) -#define PAD_CTL_DSE_DISABLE (0 << 3) -#define PAD_CTL_DSE_240ohm (1 << 3) -#define PAD_CTL_DSE_120ohm (2 << 3) -#define PAD_CTL_DSE_80ohm (3 << 3) -#define PAD_CTL_DSE_60ohm (4 << 3) -#define PAD_CTL_DSE_48ohm (5 << 3) -#define PAD_CTL_DSE_40ohm (6 << 3) -#define PAD_CTL_DSE_34ohm (7 << 3) -#define PAD_CTL_SRE_FAST (1 << 0) -#define PAD_CTL_SRE_SLOW (0 << 0) - -#define IOMUX_CONFIG_SION 0x10 -#define NO_MUX_I 0 -#define NO_PAD_I 0 enum { MX6_PAD_CSI0_DAT10__UART1_TXD = IOMUX_PAD(0x0360, 0x004C, 3, 0x0000, 0, 0), MX6_PAD_CSI0_DAT11__UART1_RXD = IOMUX_PAD(0x0364, 0x0050, 3, 0x08FC, 1, 0), @@ -93,6 +66,7 @@ enum { MX6_PAD_EIM_D28__I2C1_SDA = IOMUX_PAD(0x0544, 0x0174, 1 | IOMUX_CONFIG_SION, 0x086C, 1, 0), MX6_PAD_EIM_D28__GPIO_3_28 = IOMUX_PAD(0x0544, 0x0174, 5, 0x0000, 0, 0), MX6_PAD_EIM_D29__GPIO_3_29 = IOMUX_PAD(0x0548, 0x0178, 5, 0x0000, 0, 0), + MX6_PAD_EIM_DA9__GPIO_3_9 = IOMUX_PAD(0x0590, 0x01C0, 5, 0x0000, 0, 0), MX6_PAD_ENET_MDC__ENET_MDC = IOMUX_PAD(0x05B8, 0x01E8, 1, 0x0000, 0, 0), MX6_PAD_ENET_MDIO__ENET_MDIO = IOMUX_PAD(0x05BC, 0x01EC, 1, 0x0810, 0, 0), MX6_PAD_ENET_REF_CLK__ENET_TX_CLK = IOMUX_PAD(0x05C0, 0x01F0, 1, 0x0000, 0, 0), @@ -102,6 +76,7 @@ enum { MX6_PAD_GPIO_17__GPIO_7_12 = IOMUX_PAD(0x05E8, 0x0218, 5, 0x0000, 0, 0), MX6_PAD_GPIO_18__GPIO_7_13 = IOMUX_PAD(0x05EC, 0x021C, 5, 0x0000, 0, 0), MX6_PAD_GPIO_19__GPIO_4_5 = IOMUX_PAD(0x05F0, 0x0220, 5, 0x0000, 0, 0), + MX6_PAD_GPIO_2__GPIO_1_2 = IOMUX_PAD(0x05F4, 0x0224, 5, 0x0000, 0, 0), MX6_PAD_GPIO_5__GPIO_1_5 = IOMUX_PAD(0x0600, 0x0230, 5, 0x0000, 0, 0), MX6_PAD_GPIO_5__I2C3_SCL = IOMUX_PAD(0x0600, 0x0230, 6 | IOMUX_CONFIG_SION, 0x0878, 2, 0), MX6_PAD_KEY_COL3__I2C2_SCL = IOMUX_PAD(0x0638, 0x0250, 4 | IOMUX_CONFIG_SION, 0x0870, 1, 0), @@ -134,8 +109,14 @@ enum { MX6_PAD_RGMII_TD3__ENET_RGMII_TD3 = IOMUX_PAD(0x06B8, 0x02D0, 1, 0x0000, 0, 0), MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL = IOMUX_PAD(0x06BC, 0x02D4, 1, 0x0000, 0, 0), MX6_PAD_RGMII_TXC__ENET_RGMII_TXC = IOMUX_PAD(0x06C0, 0x02D8, 1, 0x0000, 0, 0), + MX6_PAD_SD1_CLK__USDHC1_CLK = IOMUX_PAD(0x06C4, 0x02DC, 0, 0x0928, 1, 0), + MX6_PAD_SD1_CMD__USDHC1_CMD = IOMUX_PAD(0x06C8, 0x02E0, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0), MX6_PAD_SD1_CMD__GPIO_1_18 = IOMUX_PAD(0x06C8, 0x02E0, 5, 0x0000, 0, 0), MX6_PAD_SD1_DAT3__GPIO_1_21 = IOMUX_PAD(0x06D8, 0x02F0, 5, 0x0000, 0, 0), + MX6_PAD_SD1_DAT0__USDHC1_DAT0 = IOMUX_PAD(0x06CC, 0x02E4, 0, 0x0000, 0, 0), + MX6_PAD_SD1_DAT1__USDHC1_DAT1 = IOMUX_PAD(0x06D0, 0x02E8, 0, 0x0000, 0, 0), + MX6_PAD_SD1_DAT2__USDHC1_DAT2 = IOMUX_PAD(0x06D4, 0x02EC, 0, 0x0000, 0, 0), + MX6_PAD_SD1_DAT3__USDHC1_DAT3 = IOMUX_PAD(0x06D8, 0x02F0, 0, 0x0000, 0, 0), MX6_PAD_SD3_CLK__USDHC3_CLK = IOMUX_PAD(0x06F4, 0x030C, 0, 0x0934, 1, 0), MX6_PAD_SD3_CMD__USDHC3_CMD = IOMUX_PAD(0x06F8, 0x0310, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0), MX6_PAD_SD3_DAT0__USDHC3_DAT0 = IOMUX_PAD(0x06FC, 0x0314, 0, 0x0000, 0, 0), diff --git a/arch/arm/include/asm/arch-mx6/mx6q_pins.h b/arch/arm/include/asm/arch-mx6/mx6q_pins.h index 1c1c008..02a40d4 100644 --- a/arch/arm/include/asm/arch-mx6/mx6q_pins.h +++ b/arch/arm/include/asm/arch-mx6/mx6q_pins.h @@ -24,33 +24,6 @@ #include <asm/imx-common/iomux-v3.h> -/* Use to set PAD control */ -#define PAD_CTL_HYS (1 << 16) -#define PAD_CTL_PUS_100K_DOWN (0 << 14) -#define PAD_CTL_PUS_47K_UP (1 << 14) -#define PAD_CTL_PUS_100K_UP (2 << 14) -#define PAD_CTL_PUS_22K_UP (3 << 14) - -#define PAD_CTL_PUE (1 << 13) -#define PAD_CTL_PKE (1 << 12) -#define PAD_CTL_ODE (1 << 11) -#define PAD_CTL_SPEED_LOW (1 << 6) -#define PAD_CTL_SPEED_MED (2 << 6) -#define PAD_CTL_SPEED_HIGH (3 << 6) -#define PAD_CTL_DSE_DISABLE (0 << 3) -#define PAD_CTL_DSE_240ohm (1 << 3) -#define PAD_CTL_DSE_120ohm (2 << 3) -#define PAD_CTL_DSE_80ohm (3 << 3) -#define PAD_CTL_DSE_60ohm (4 << 3) -#define PAD_CTL_DSE_48ohm (5 << 3) -#define PAD_CTL_DSE_40ohm (6 << 3) -#define PAD_CTL_DSE_34ohm (7 << 3) -#define PAD_CTL_SRE_FAST (1 << 0) -#define PAD_CTL_SRE_SLOW (0 << 0) - -#define NO_MUX_I 0 -#define NO_PAD_I 0 - enum { MX6_PAD_SD2_DAT1__USDHC2_DAT1 = IOMUX_PAD(0x0360, 0x004C, 0, 0x0000, 0, 0), MX6_PAD_SD2_DAT1__ECSPI5_SS0 = IOMUX_PAD(0x0360, 0x004C, 1, 0x0834, 0, 0), diff --git a/arch/arm/include/asm/arch-mx6/mx6sl_pins.h b/arch/arm/include/asm/arch-mx6/mx6sl_pins.h new file mode 100644 index 0000000..3c0ede0 --- /dev/null +++ b/arch/arm/include/asm/arch-mx6/mx6sl_pins.h @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2013 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __ASM_ARCH_MX6_MX6SL_PINS_H__ +#define __ASM_ARCH_MX6_MX6SL_PINS_H__ + +#include <asm/imx-common/iomux-v3.h> + +enum { + MX6_PAD_SD2_CLK__USDHC2_CLK = IOMUX_PAD(0x055C, 0x0254, 0, 0x0000, 0, 0), + MX6_PAD_SD2_CMD__USDHC2_CMD = IOMUX_PAD(0x0560, 0x0258, 0, 0x0000, 0, 0), + MX6_PAD_SD2_DAT0__USDHC2_DAT0 = IOMUX_PAD(0x0564, 0x025C, 0, 0x0000, 0, 0), + MX6_PAD_SD2_DAT1__USDHC2_DAT1 = IOMUX_PAD(0x0568, 0x0260, 0, 0x0000, 0, 0), + MX6_PAD_SD2_DAT2__USDHC2_DAT2 = IOMUX_PAD(0x056C, 0x0264, 0, 0x0000, 0, 0), + MX6_PAD_SD2_DAT3__USDHC2_DAT3 = IOMUX_PAD(0x0570, 0x0268, 0, 0x0000, 0, 0), + MX6_PAD_UART1_RXD__UART1_RXD = IOMUX_PAD(0x05A0, 0x0298, 0, 0x07FC, 0, 0), + MX6_PAD_UART1_TXD__UART1_TXD = IOMUX_PAD(0x05A4, 0x029C, 0, 0x0000, 0, 0), +}; +#endif /* __ASM_ARCH_MX6_MX6SL_PINS_H__ */ diff --git a/arch/arm/include/asm/arch-mx6/sys_proto.h b/arch/arm/include/asm/arch-mx6/sys_proto.h index 3193297..38e4e51 100644 --- a/arch/arm/include/asm/arch-mx6/sys_proto.h +++ b/arch/arm/include/asm/arch-mx6/sys_proto.h @@ -24,6 +24,8 @@ #ifndef _SYS_PROTO_H_ #define _SYS_PROTO_H_ +#include <asm/imx-common/regs-common.h> + #define MXC_CPU_MX51 0x51 #define MXC_CPU_MX53 0x53 #define MXC_CPU_MX6SL 0x60 @@ -46,4 +48,12 @@ void set_vddsoc(u32 mv); int fecmxc_initialize(bd_t *bis); u32 get_ahb_clk(void); u32 get_periph_clk(void); + +int mxs_reset_block(struct mxs_register_32 *reg); +int mxs_wait_mask_set(struct mxs_register_32 *reg, + uint32_t mask, + unsigned int timeout); +int mxs_wait_mask_clr(struct mxs_register_32 *reg, + uint32_t mask, + unsigned int timeout); #endif diff --git a/arch/arm/include/asm/arch-mxs/clock.h b/arch/arm/include/asm/arch-mxs/clock.h index 3f7d3f0..9be53f0 100644 --- a/arch/arm/include/asm/arch-mxs/clock.h +++ b/arch/arm/include/asm/arch-mxs/clock.h @@ -59,6 +59,7 @@ uint32_t mxc_get_clock(enum mxc_clock clk); void mxs_set_ioclk(enum mxs_ioclock io, uint32_t freq); void mxs_set_sspclk(enum mxs_sspclock ssp, uint32_t freq, int xtal); void mxs_set_ssp_busclock(unsigned int bus, uint32_t freq); +void mxs_set_lcdclk(uint32_t freq); /* Compatibility with the FEC Ethernet driver */ #define imx_get_fecclk() mxc_get_clock(MXC_AHB_CLK) diff --git a/arch/arm/include/asm/arch-mxs/imx-regs.h b/arch/arm/include/asm/arch-mxs/imx-regs.h index 8f67497..dc21e34 100644 --- a/arch/arm/include/asm/arch-mxs/imx-regs.h +++ b/arch/arm/include/asm/arch-mxs/imx-regs.h @@ -23,11 +23,11 @@ #ifndef __IMX_REGS_H__ #define __IMX_REGS_H__ -#include <asm/arch/regs-apbh.h> +#include <asm/imx-common/regs-apbh.h> #include <asm/arch/regs-base.h> -#include <asm/arch/regs-bch.h> +#include <asm/imx-common/regs-bch.h> #include <asm/arch/regs-digctl.h> -#include <asm/arch/regs-gpmi.h> +#include <asm/imx-common/regs-gpmi.h> #include <asm/arch/regs-i2c.h> #include <asm/arch/regs-lcdif.h> #include <asm/arch/regs-lradc.h> diff --git a/arch/arm/include/asm/arch-mxs/iomux.h b/arch/arm/include/asm/arch-mxs/iomux.h index 4288715..d919fb2 100644 --- a/arch/arm/include/asm/arch-mxs/iomux.h +++ b/arch/arm/include/asm/arch-mxs/iomux.h @@ -71,7 +71,11 @@ typedef u32 iomux_cfg_t; #define PAD_16MA 3 #define PAD_1V8 0 +#if defined(CONFIG_MX28) #define PAD_3V3 1 +#else +#define PAD_3V3 0 +#endif #define PAD_NOPULL 0 #define PAD_PULLUP 1 diff --git a/arch/arm/include/asm/arch-mxs/regs-clkctrl-mx23.h b/arch/arm/include/asm/arch-mxs/regs-clkctrl-mx23.h index 62810ec..c3cba33 100644 --- a/arch/arm/include/asm/arch-mxs/regs-clkctrl-mx23.h +++ b/arch/arm/include/asm/arch-mxs/regs-clkctrl-mx23.h @@ -26,7 +26,7 @@ #ifndef __MX23_REGS_CLKCTRL_H__ #define __MX23_REGS_CLKCTRL_H__ -#include <asm/arch/regs-common.h> +#include <asm/imx-common/regs-common.h> #ifndef __ASSEMBLY__ struct mxs_clkctrl_regs { diff --git a/arch/arm/include/asm/arch-mxs/regs-clkctrl-mx28.h b/arch/arm/include/asm/arch-mxs/regs-clkctrl-mx28.h index 23e9adc..1c2c82e 100644 --- a/arch/arm/include/asm/arch-mxs/regs-clkctrl-mx28.h +++ b/arch/arm/include/asm/arch-mxs/regs-clkctrl-mx28.h @@ -26,7 +26,7 @@ #ifndef __MX28_REGS_CLKCTRL_H__ #define __MX28_REGS_CLKCTRL_H__ -#include <asm/arch/regs-common.h> +#include <asm/imx-common/regs-common.h> #ifndef __ASSEMBLY__ struct mxs_clkctrl_regs { diff --git a/arch/arm/include/asm/arch-mxs/regs-digctl.h b/arch/arm/include/asm/arch-mxs/regs-digctl.h index d043325..d4a3966 100644 --- a/arch/arm/include/asm/arch-mxs/regs-digctl.h +++ b/arch/arm/include/asm/arch-mxs/regs-digctl.h @@ -22,7 +22,7 @@ #ifndef __MX28_REGS_DIGCTL_H__ #define __MX28_REGS_DIGCTL_H__ -#include <asm/arch/regs-common.h> +#include <asm/imx-common/regs-common.h> #ifndef __ASSEMBLY__ struct mxs_digctl_regs { diff --git a/arch/arm/include/asm/arch-mxs/regs-i2c.h b/arch/arm/include/asm/arch-mxs/regs-i2c.h index 067cfd3..d062b5b 100644 --- a/arch/arm/include/asm/arch-mxs/regs-i2c.h +++ b/arch/arm/include/asm/arch-mxs/regs-i2c.h @@ -23,7 +23,7 @@ #ifndef __MX28_REGS_I2C_H__ #define __MX28_REGS_I2C_H__ -#include <asm/arch/regs-common.h> +#include <asm/imx-common/regs-common.h> #ifndef __ASSEMBLY__ struct mxs_i2c_regs { diff --git a/arch/arm/include/asm/arch-mxs/regs-lcdif.h b/arch/arm/include/asm/arch-mxs/regs-lcdif.h index b90b2d4..59ce236 100644 --- a/arch/arm/include/asm/arch-mxs/regs-lcdif.h +++ b/arch/arm/include/asm/arch-mxs/regs-lcdif.h @@ -26,16 +26,23 @@ #ifndef __MX28_REGS_LCDIF_H__ #define __MX28_REGS_LCDIF_H__ -#include <asm/arch/regs-common.h> +#include <asm/imx-common/regs-common.h> #ifndef __ASSEMBLY__ struct mxs_lcdif_regs { mxs_reg_32(hw_lcdif_ctrl) /* 0x00 */ mxs_reg_32(hw_lcdif_ctrl1) /* 0x10 */ +#if defined(CONFIG_MX28) mxs_reg_32(hw_lcdif_ctrl2) /* 0x20 */ - mxs_reg_32(hw_lcdif_transfer_count) /* 0x30 */ - mxs_reg_32(hw_lcdif_cur_buf) /* 0x40 */ - mxs_reg_32(hw_lcdif_next_buf) /* 0x50 */ +#endif + mxs_reg_32(hw_lcdif_transfer_count) /* 0x20/0x30 */ + mxs_reg_32(hw_lcdif_cur_buf) /* 0x30/0x40 */ + mxs_reg_32(hw_lcdif_next_buf) /* 0x40/0x50 */ + +#if defined(CONFIG_MX23) + uint32_t reserved1[4]; +#endif + mxs_reg_32(hw_lcdif_timing) /* 0x60 */ mxs_reg_32(hw_lcdif_vdctrl0) /* 0x70 */ mxs_reg_32(hw_lcdif_vdctrl1) /* 0x80 */ @@ -54,13 +61,19 @@ struct mxs_lcdif_regs { mxs_reg_32(hw_lcdif_csc_coeffctrl4) /* 0x150 */ mxs_reg_32(hw_lcdif_csc_offset) /* 0x160 */ mxs_reg_32(hw_lcdif_csc_limit) /* 0x170 */ - mxs_reg_32(hw_lcdif_data) /* 0x180 */ - mxs_reg_32(hw_lcdif_bm_error_stat) /* 0x190 */ + +#if defined(CONFIG_MX23) + uint32_t reserved2[12]; +#endif + mxs_reg_32(hw_lcdif_data) /* 0x1b0/0x180 */ + mxs_reg_32(hw_lcdif_bm_error_stat) /* 0x1c0/0x190 */ +#if defined(CONFIG_MX28) mxs_reg_32(hw_lcdif_crc_stat) /* 0x1a0 */ - mxs_reg_32(hw_lcdif_lcdif_stat) /* 0x1b0 */ - mxs_reg_32(hw_lcdif_version) /* 0x1c0 */ - mxs_reg_32(hw_lcdif_debug0) /* 0x1d0 */ - mxs_reg_32(hw_lcdif_debug1) /* 0x1e0 */ +#endif + mxs_reg_32(hw_lcdif_lcdif_stat) /* 0x1d0/0x1b0 */ + mxs_reg_32(hw_lcdif_version) /* 0x1e0/0x1c0 */ + mxs_reg_32(hw_lcdif_debug0) /* 0x1f0/0x1d0 */ + mxs_reg_32(hw_lcdif_debug1) /* 0x200/0x1e0 */ mxs_reg_32(hw_lcdif_debug2) /* 0x1f0 */ }; #endif @@ -191,8 +204,13 @@ struct mxs_lcdif_regs { #define LCDIF_VDCTRL1_VSYNC_PERIOD_MASK 0xffffffff #define LCDIF_VDCTRL1_VSYNC_PERIOD_OFFSET 0 +#if defined(CONFIG_MX23) +#define LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH_MASK (0xff << 24) +#define LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH_OFFSET 24 +#elif defined(CONFIG_MX28) #define LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH_MASK (0x3fff << 18) #define LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH_OFFSET 18 +#endif #define LCDIF_VDCTRL2_HSYNC_PERIOD_MASK 0x3ffff #define LCDIF_VDCTRL2_HSYNC_PERIOD_OFFSET 0 diff --git a/arch/arm/include/asm/arch-mxs/regs-lradc.h b/arch/arm/include/asm/arch-mxs/regs-lradc.h index 28d8382..23fd0e3 100644 --- a/arch/arm/include/asm/arch-mxs/regs-lradc.h +++ b/arch/arm/include/asm/arch-mxs/regs-lradc.h @@ -26,7 +26,7 @@ #ifndef __MX28_REGS_LRADC_H__ #define __MX28_REGS_LRADC_H__ -#include <asm/arch/regs-common.h> +#include <asm/imx-common/regs-common.h> #ifndef __ASSEMBLY__ struct mxs_lradc_regs { diff --git a/arch/arm/include/asm/arch-mxs/regs-ocotp.h b/arch/arm/include/asm/arch-mxs/regs-ocotp.h index 3269892..5af3855 100644 --- a/arch/arm/include/asm/arch-mxs/regs-ocotp.h +++ b/arch/arm/include/asm/arch-mxs/regs-ocotp.h @@ -26,7 +26,7 @@ #ifndef __MX28_REGS_OCOTP_H__ #define __MX28_REGS_OCOTP_H__ -#include <asm/arch/regs-common.h> +#include <asm/imx-common/regs-common.h> #ifndef __ASSEMBLY__ struct mxs_ocotp_regs { diff --git a/arch/arm/include/asm/arch-mxs/regs-pinctrl.h b/arch/arm/include/asm/arch-mxs/regs-pinctrl.h index d584170..191093b 100644 --- a/arch/arm/include/asm/arch-mxs/regs-pinctrl.h +++ b/arch/arm/include/asm/arch-mxs/regs-pinctrl.h @@ -26,7 +26,7 @@ #ifndef __MX28_REGS_PINCTRL_H__ #define __MX28_REGS_PINCTRL_H__ -#include <asm/arch/regs-common.h> +#include <asm/imx-common/regs-common.h> #ifndef __ASSEMBLY__ struct mxs_pinctrl_regs { diff --git a/arch/arm/include/asm/arch-mxs/regs-power-mx23.h b/arch/arm/include/asm/arch-mxs/regs-power-mx23.h index 51a981a..a7430c4 100644 --- a/arch/arm/include/asm/arch-mxs/regs-power-mx23.h +++ b/arch/arm/include/asm/arch-mxs/regs-power-mx23.h @@ -22,7 +22,7 @@ #ifndef __MX23_REGS_POWER_H__ #define __MX23_REGS_POWER_H__ -#include <asm/arch/regs-common.h> +#include <asm/imx-common/regs-common.h> #ifndef __ASSEMBLY__ struct mxs_power_regs { diff --git a/arch/arm/include/asm/arch-mxs/regs-power-mx28.h b/arch/arm/include/asm/arch-mxs/regs-power-mx28.h index 257ee88..4a73b1c 100644 --- a/arch/arm/include/asm/arch-mxs/regs-power-mx28.h +++ b/arch/arm/include/asm/arch-mxs/regs-power-mx28.h @@ -22,7 +22,7 @@ #ifndef __MX28_REGS_POWER_H__ #define __MX28_REGS_POWER_H__ -#include <asm/arch/regs-common.h> +#include <asm/imx-common/regs-common.h> #ifndef __ASSEMBLY__ struct mxs_power_regs { diff --git a/arch/arm/include/asm/arch-mxs/regs-rtc.h b/arch/arm/include/asm/arch-mxs/regs-rtc.h index 6b2dd33..1926546 100644 --- a/arch/arm/include/asm/arch-mxs/regs-rtc.h +++ b/arch/arm/include/asm/arch-mxs/regs-rtc.h @@ -23,7 +23,7 @@ #ifndef __MX28_REGS_RTC_H__ #define __MX28_REGS_RTC_H__ -#include <asm/arch/regs-common.h> +#include <asm/imx-common/regs-common.h> #ifndef __ASSEMBLY__ struct mxs_rtc_regs { diff --git a/arch/arm/include/asm/arch-mxs/regs-ssp.h b/arch/arm/include/asm/arch-mxs/regs-ssp.h index 5920f9b..0b61fa9 100644 --- a/arch/arm/include/asm/arch-mxs/regs-ssp.h +++ b/arch/arm/include/asm/arch-mxs/regs-ssp.h @@ -25,7 +25,7 @@ #ifndef __MX28_REGS_SSP_H__ #define __MX28_REGS_SSP_H__ -#include <asm/arch/regs-common.h> +#include <asm/imx-common/regs-common.h> #ifndef __ASSEMBLY__ #if defined(CONFIG_MX23) diff --git a/arch/arm/include/asm/arch-mxs/regs-timrot.h b/arch/arm/include/asm/arch-mxs/regs-timrot.h index f8537f1..df343bd 100644 --- a/arch/arm/include/asm/arch-mxs/regs-timrot.h +++ b/arch/arm/include/asm/arch-mxs/regs-timrot.h @@ -25,7 +25,7 @@ #ifndef __MX28_REGS_TIMROT_H__ #define __MX28_REGS_TIMROT_H__ -#include <asm/arch/regs-common.h> +#include <asm/imx-common/regs-common.h> #ifndef __ASSEMBLY__ struct mxs_timrot_regs { diff --git a/arch/arm/include/asm/arch-omap4/omap.h b/arch/arm/include/asm/arch-omap4/omap.h index ad984da..e9a6ffe 100644 --- a/arch/arm/include/asm/arch-omap4/omap.h +++ b/arch/arm/include/asm/arch-omap4/omap.h @@ -143,40 +143,4 @@ struct s32ktimer { #define NON_SECURE_SRAM_END 0x4030E000 /* Not inclusive */ /* base address for indirect vectors (internal boot mode) */ #define SRAM_ROM_VECT_BASE 0x4030D000 -/* Temporary SRAM stack used while low level init is done */ -#define SRAM_SCRATCH_SPACE_ADDR NON_SECURE_SRAM_START -/* SRAM scratch space entries */ -#define OMAP4_SRAM_SCRATCH_OMAP4_REV SRAM_SCRATCH_SPACE_ADDR -#define OMAP4_SRAM_SCRATCH_EMIF_T_NUM (SRAM_SCRATCH_SPACE_ADDR + 0xC) -#define OMAP4_SRAM_SCRATCH_EMIF_T_DEN (SRAM_SCRATCH_SPACE_ADDR + 0x10) -#define OMAP_SRAM_SCRATCH_PRCM_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x14) -#define OMAP_SRAM_SCRATCH_DPLLS_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x18) -#define OMAP_SRAM_SCRATCH_VCORES_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x1C) -#define OMAP4_SRAM_SCRATCH_SYS_CTRL (SRAM_SCRATCH_SPACE_ADDR + 0x20) -#define OMAP4_SRAM_SCRATCH_SPACE_END (SRAM_SCRATCH_SPACE_ADDR + 0x24) - -/* ROM code defines */ -/* Boot device */ -#define BOOT_DEVICE_MASK 0xFF -#define BOOT_DEVICE_OFFSET 0x8 -#define DEV_DESC_PTR_OFFSET 0x4 -#define DEV_DATA_PTR_OFFSET 0x18 -#define BOOT_MODE_OFFSET 0x8 -#define RESET_REASON_OFFSET 0x9 -#define CH_FLAGS_OFFSET 0xA - -#define CH_FLAGS_CHSETTINGS (0x1 << 0) -#define CH_FLAGS_CHRAM (0x1 << 1) -#define CH_FLAGS_CHFLASH (0x1 << 2) -#define CH_FLAGS_CHMMCSD (0x1 << 3) - -#ifndef __ASSEMBLY__ -struct omap_boot_parameters { - char *boot_message; - unsigned int mem_boot_descriptor; - unsigned char omap_bootdevice; - unsigned char reset_reason; - unsigned char ch_flags; -}; -#endif #endif diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h index d5f1868..039a1f2 100644 --- a/arch/arm/include/asm/arch-omap4/sys_proto.h +++ b/arch/arm/include/asm/arch-omap4/sys_proto.h @@ -27,6 +27,8 @@ #include <asm/omap_common.h> #include <asm/arch/mux_omap4.h> +DECLARE_GLOBAL_DATA_PTR; + struct omap_sysinfo { char *board_string; }; @@ -58,13 +60,7 @@ void omap_vc_init(u16 speed_khz); int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data); u32 warm_reset(void); void force_emif_self_refresh(void); -/* - * This is used to verify if the configuration header - * was executed by Romcode prior to control of transfer - * to the bootloader. SPL is responsible for saving and - * passing this to the u-boot. - */ -extern struct omap_boot_parameters boot_params; +void setup_warmreset_time(void); static inline u32 running_from_sdram(void) { @@ -84,7 +80,7 @@ static inline u8 uboot_loaded_by_spl(void) * variable by both SPL and u-boot.Check out for CHSETTINGS, which is a * mandatory section if CH is present. */ - if ((boot_params.ch_flags) & (CH_FLAGS_CHSETTINGS)) + if ((gd->arch.omap_boot_params.ch_flags) & (CH_FLAGS_CHSETTINGS)) return 0; else return running_from_sdram(); diff --git a/arch/arm/include/asm/arch-omap5/clocks.h b/arch/arm/include/asm/arch-omap5/clocks.h index cfde374..68afa76 100644 --- a/arch/arm/include/asm/arch-omap5/clocks.h +++ b/arch/arm/include/asm/arch-omap5/clocks.h @@ -190,6 +190,10 @@ #define OPTFCLKEN_SRCOMP_FCLK_SHIFT 8 #define OPTFCLKEN_SRCOMP_FCLK_MASK (1 << 8) +/* PRM_RSTTIME */ +#define RSTTIME1_SHIFT 0 +#define RSTTIME1_MASK (0x3ff << 0) + /* Clock frequencies */ #define OMAP_SYS_CLK_FREQ_38_4_MHZ 38400000 #define OMAP_SYS_CLK_IND_38_4_MHZ 6 @@ -251,4 +255,10 @@ #define DPLL_NO_LOCK 0 #define DPLL_LOCK 1 +/* + * MAX value for PRM_RSTTIME[9:0]RSTTIME1 stored is 0x3ff. + * 0x3ff is in the no of FUNC_32K_CLK cycles. Converting cycles + * into microsec and passing the value. + */ +#define CONFIG_DEFAULT_OMAP_RESET_TIME_MAX_USEC 31219 #endif /* _CLOCKS_OMAP5_H_ */ diff --git a/arch/arm/include/asm/arch-omap5/cpu.h b/arch/arm/include/asm/arch-omap5/cpu.h index 5e62013..044ab55 100644 --- a/arch/arm/include/asm/arch-omap5/cpu.h +++ b/arch/arm/include/asm/arch-omap5/cpu.h @@ -142,6 +142,8 @@ struct watchdog { #define I2C_BASE1 (OMAP54XX_L4_PER_BASE + 0x70000) #define I2C_BASE2 (OMAP54XX_L4_PER_BASE + 0x72000) #define I2C_BASE3 (OMAP54XX_L4_PER_BASE + 0x60000) +#define I2C_BASE4 (OMAP54XX_L4_PER_BASE + 0x7A000) +#define I2C_BASE5 (OMAP54XX_L4_PER_BASE + 0x7C000) /* MUSB base */ #define MUSB_BASE (OMAP54XX_L4_CORE_BASE + 0xAB000) diff --git a/arch/arm/include/asm/arch-omap5/i2c.h b/arch/arm/include/asm/arch-omap5/i2c.h index 68be03b..ec39a53 100644 --- a/arch/arm/include/asm/arch-omap5/i2c.h +++ b/arch/arm/include/asm/arch-omap5/i2c.h @@ -23,7 +23,7 @@ #ifndef _OMAP5_I2C_H_ #define _OMAP5_I2C_H_ -#define I2C_BUS_MAX 3 +#define I2C_BUS_MAX 5 #define I2C_DEFAULT_BASE I2C_BASE1 struct i2c { diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h index 887fcaa..4f43a90 100644 --- a/arch/arm/include/asm/arch-omap5/omap.h +++ b/arch/arm/include/asm/arch-omap5/omap.h @@ -191,19 +191,6 @@ struct s32ktimer { /* base address for indirect vectors (internal boot mode) */ #define SRAM_ROM_VECT_BASE 0x4031F000 -#define SRAM_SCRATCH_SPACE_ADDR NON_SECURE_SRAM_START -/* - * SRAM scratch space entries - */ -#define OMAP5_SRAM_SCRATCH_OMAP5_REV SRAM_SCRATCH_SPACE_ADDR -#define OMAP5_SRAM_SCRATCH_EMIF_T_NUM (SRAM_SCRATCH_SPACE_ADDR + 0xC) -#define OMAP5_SRAM_SCRATCH_EMIF_T_DEN (SRAM_SCRATCH_SPACE_ADDR + 0x10) -#define OMAP_SRAM_SCRATCH_PRCM_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x14) -#define OMAP_SRAM_SCRATCH_DPLLS_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x18) -#define OMAP_SRAM_SCRATCH_VCORES_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x1C) -#define OMAP5_SRAM_SCRATCH_SYS_CTRL (SRAM_SCRATCH_SPACE_ADDR + 0x20) -#define OMAP5_SRAM_SCRATCH_SPACE_END (SRAM_SCRATCH_SPACE_ADDR + 0x24) - /* Silicon revisions */ #define OMAP4430_SILICON_ID_INVALID 0xFFFFFFFF #define OMAP4430_ES1_0 0x44300100 @@ -214,21 +201,6 @@ struct s32ktimer { #define OMAP4460_ES1_0 0x44600100 #define OMAP4460_ES1_1 0x44600110 -/* ROM code defines */ -/* Boot device */ -#define BOOT_DEVICE_MASK 0xFF -#define BOOT_DEVICE_OFFSET 0x8 -#define DEV_DESC_PTR_OFFSET 0x4 -#define DEV_DATA_PTR_OFFSET 0x18 -#define BOOT_MODE_OFFSET 0x8 -#define RESET_REASON_OFFSET 0x9 -#define CH_FLAGS_OFFSET 0xA - -#define CH_FLAGS_CHSETTINGS (0x1 << 0) -#define CH_FLAGS_CHRAM (0x1 << 1) -#define CH_FLAGS_CHFLASH (0x1 << 2) -#define CH_FLAGS_CHMMCSD (0x1 << 3) - /* CONTROL_SRCOMP_XXX_SIDE */ #define OVERRIDE_XS_SHIFT 30 #define OVERRIDE_XS_MASK (1 << 30) @@ -249,14 +221,6 @@ struct srcomp_params { s8 multiply_factor; }; -struct omap_boot_parameters { - char *boot_message; - unsigned int mem_boot_descriptor; - unsigned char omap_bootdevice; - unsigned char reset_reason; - unsigned char ch_flags; -}; - struct ctrl_ioregs { u32 ctrl_ddrch; u32 ctrl_lpddr2ch; diff --git a/arch/arm/include/asm/arch-omap5/sys_proto.h b/arch/arm/include/asm/arch-omap5/sys_proto.h index e66ab44..b79161d 100644 --- a/arch/arm/include/asm/arch-omap5/sys_proto.h +++ b/arch/arm/include/asm/arch-omap5/sys_proto.h @@ -27,6 +27,8 @@ #include <asm/omap_common.h> #include <asm/arch/clocks.h> +DECLARE_GLOBAL_DATA_PTR; + struct pad_conf_entry { u32 offset; u32 val; @@ -64,14 +66,7 @@ u32 warm_reset(void); void force_emif_self_refresh(void); void get_ioregs(const struct ctrl_ioregs **regs); void srcomp_enable(void); - -/* - * This is used to verify if the configuration header - * was executed by Romcode prior to control of transfer - * to the bootloader. SPL is responsible for saving and - * passing this to the u-boot. - */ -extern struct omap_boot_parameters boot_params; +void setup_warmreset_time(void); static inline u32 running_from_sdram(void) { @@ -91,7 +86,7 @@ static inline u8 uboot_loaded_by_spl(void) * variable by both SPL and u-boot.Check out for CHSETTINGS, which is a * mandatory section if CH is present. */ - if ((boot_params.ch_flags) & (CH_FLAGS_CHSETTINGS)) + if ((gd->arch.omap_boot_params.ch_flags) & (CH_FLAGS_CHSETTINGS)) return 0; else return running_from_sdram(); @@ -122,4 +117,13 @@ static inline u32 omap_hw_init_context(void) #endif } +static inline u32 div_round_up(u32 num, u32 den) +{ + return (num + den - 1)/den; +} + +static inline u32 usec_to_32k(u32 usec) +{ + return div_round_up(32768 * usec, 1000000); +} #endif diff --git a/arch/arm/include/asm/arch-pxa/hardware.h b/arch/arm/include/asm/arch-pxa/hardware.h index 44b800f..2397bce 100644 --- a/arch/arm/include/asm/arch-pxa/hardware.h +++ b/arch/arm/include/asm/arch-pxa/hardware.h @@ -77,17 +77,6 @@ #define GPIO_FALLING_EDGE 1 #define GPIO_RISING_EDGE 2 #define GPIO_BOTH_EDGES 3 -extern void set_GPIO_IRQ_edge( int gpio_nr, int edge_mask ); - -/* - * Handy routine to set GPIO alternate functions - */ -extern void set_GPIO_mode( int gpio_mode ); - -/* - * return current lclk frequency in units of 10kHz - */ -extern unsigned int get_lclk_frequency_10khz(void); #endif diff --git a/arch/arm/include/asm/arch-tegra/tegra.h b/arch/arm/include/asm/arch-tegra/tegra.h index 3e642e9..5fe4838 100644 --- a/arch/arm/include/asm/arch-tegra/tegra.h +++ b/arch/arm/include/asm/arch-tegra/tegra.h @@ -72,6 +72,7 @@ struct timerus { /* These are the available SKUs (product types) for Tegra */ enum { + SKU_ID_T20_7 = 0x7, SKU_ID_T20 = 0x8, SKU_ID_T25SE = 0x14, SKU_ID_AP25 = 0x17, @@ -81,6 +82,7 @@ enum { SKU_ID_T33 = 0x80, SKU_ID_T30 = 0x81, /* Cardhu value */ SKU_ID_T114_ENG = 0x00, /* Dalmore value, unfused */ + SKU_ID_T114_1 = 0x01, }; /* diff --git a/arch/arm/include/asm/arch-zynq/hardware.h b/arch/arm/include/asm/arch-zynq/hardware.h index d0c69da..8b8a91a 100644 --- a/arch/arm/include/asm/arch-zynq/hardware.h +++ b/arch/arm/include/asm/arch-zynq/hardware.h @@ -23,16 +23,28 @@ #ifndef _ASM_ARCH_HARDWARE_H #define _ASM_ARCH_HARDWARE_H -#define XPSS_SYS_CTRL_BASEADDR 0xF8000000 -#define XPSS_DEV_CFG_APB_BASEADDR 0xF8007000 -#define XPSS_SCU_BASEADDR 0xF8F00000 +#define ZYNQ_SYS_CTRL_BASEADDR 0xF8000000 +#define ZYNQ_DEV_CFG_APB_BASEADDR 0xF8007000 +#define ZYNQ_SCU_BASEADDR 0xF8F00000 +#define ZYNQ_SCUTIMER_BASEADDR 0xF8F00600 +#define ZYNQ_GEM_BASEADDR0 0xE000B000 +#define ZYNQ_GEM_BASEADDR1 0xE000C000 +#define ZYNQ_SDHCI_BASEADDR0 0xE0100000 +#define ZYNQ_SDHCI_BASEADDR1 0xE0101000 +#define ZYNQ_I2C_BASEADDR0 0xE0004000 +#define ZYNQ_I2C_BASEADDR1 0xE0005000 /* Reflect slcr offsets */ struct slcr_regs { u32 scl; /* 0x0 */ u32 slcr_lock; /* 0x4 */ u32 slcr_unlock; /* 0x8 */ - u32 reserved1[125]; + u32 reserved0[75]; + u32 gem0_rclk_ctrl; /* 0x138 */ + u32 gem1_rclk_ctrl; /* 0x13c */ + u32 gem0_clk_ctrl; /* 0x140 */ + u32 gem1_clk_ctrl; /* 0x144 */ + u32 reserved1[46]; u32 pss_rst_ctrl; /* 0x200 */ u32 reserved2[15]; u32 fpga_rst_ctrl; /* 0x240 */ @@ -41,15 +53,21 @@ struct slcr_regs { u32 boot_mode; /* 0x25c */ u32 reserved4[116]; u32 trust_zone; /* 0x430 */ /* FIXME */ - u32 reserved5[115]; + u32 reserved5_1[63]; + u32 pss_idcode; /* 0x530 */ + u32 reserved5_2[51]; u32 ddr_urgent; /* 0x600 */ u32 reserved6[6]; u32 ddr_urgent_sel; /* 0x61c */ - u32 reserved7[188]; + u32 reserved7[56]; + u32 mio_pin[54]; /* 0x700 - 0x7D4 */ + u32 reserved8[74]; + u32 lvl_shftr_en; /* 0x900 */ + u32 reserved9[3]; u32 ocm_cfg; /* 0x910 */ }; -#define slcr_base ((struct slcr_regs *) XPSS_SYS_CTRL_BASEADDR) +#define slcr_base ((struct slcr_regs *)ZYNQ_SYS_CTRL_BASEADDR) struct devcfg_regs { u32 ctrl; /* 0x0 */ @@ -72,7 +90,7 @@ struct devcfg_regs { u32 read_count; /* 0x8c */ }; -#define devcfg_base ((struct devcfg_regs *) XPSS_DEV_CFG_APB_BASEADDR) +#define devcfg_base ((struct devcfg_regs *)ZYNQ_DEV_CFG_APB_BASEADDR) struct scu_regs { u32 reserved1[16]; @@ -80,6 +98,6 @@ struct scu_regs { u32 filter_end; /* 0x44 */ }; -#define scu_base ((struct scu_regs *) XPSS_SCU_BASEADDR) +#define scu_base ((struct scu_regs *)ZYNQ_SCU_BASEADDR) #endif /* _ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/include/asm/arch-zynq/sys_proto.h b/arch/arm/include/asm/arch-zynq/sys_proto.h index e788900..2317121 100644 --- a/arch/arm/include/asm/arch-zynq/sys_proto.h +++ b/arch/arm/include/asm/arch-zynq/sys_proto.h @@ -26,5 +26,12 @@ extern void zynq_slcr_lock(void); extern void zynq_slcr_unlock(void); extern void zynq_slcr_cpu_reset(void); +extern void zynq_slcr_gem_clk_setup(u32 gem_id, u32 rclk, u32 clk); +extern void zynq_slcr_devcfg_disable(void); +extern void zynq_slcr_devcfg_enable(void); +extern u32 zynq_slcr_get_idcode(void); + +/* Driver extern functions */ +extern int zynq_sdhci_init(u32 regbase); #endif /* _SYS_PROTO_H_ */ diff --git a/arch/arm/include/asm/global_data.h b/arch/arm/include/asm/global_data.h index 37ac0da..7611d0a 100644 --- a/arch/arm/include/asm/global_data.h +++ b/arch/arm/include/asm/global_data.h @@ -24,6 +24,10 @@ #ifndef __ASM_GBL_DATA_H #define __ASM_GBL_DATA_H +#ifdef CONFIG_OMAP +#include <asm/omap_boot.h> +#endif + /* Architecture-specific global data */ struct arch_global_data { #if defined(CONFIG_FSL_ESDHC) @@ -51,6 +55,10 @@ struct arch_global_data { unsigned long tlb_addr; unsigned long tlb_size; #endif + +#ifdef CONFIG_OMAP + struct omap_boot_parameters omap_boot_params; +#endif }; #include <asm-generic/global_data.h> diff --git a/arch/arm/include/asm/arch-mxs/dma.h b/arch/arm/include/asm/imx-common/dma.h index 1ac8696..cb74528 100644 --- a/arch/arm/include/asm/arch-mxs/dma.h +++ b/arch/arm/include/asm/imx-common/dma.h @@ -72,6 +72,18 @@ enum { MXS_DMA_CHANNEL_AHB_APBH_RESERVED1, MXS_MAX_DMA_CHANNELS, }; +#elif defined(CONFIG_MX6) +enum { + MXS_DMA_CHANNEL_AHB_APBH_GPMI0 = 0, + MXS_DMA_CHANNEL_AHB_APBH_GPMI1, + MXS_DMA_CHANNEL_AHB_APBH_GPMI2, + MXS_DMA_CHANNEL_AHB_APBH_GPMI3, + MXS_DMA_CHANNEL_AHB_APBH_GPMI4, + MXS_DMA_CHANNEL_AHB_APBH_GPMI5, + MXS_DMA_CHANNEL_AHB_APBH_GPMI6, + MXS_DMA_CHANNEL_AHB_APBH_GPMI7, + MXS_MAX_DMA_CHANNELS, +}; #endif /* diff --git a/arch/arm/include/asm/imx-common/imximage.cfg b/arch/arm/include/asm/imx-common/imximage.cfg new file mode 100644 index 0000000..95daa3d --- /dev/null +++ b/arch/arm/include/asm/imx-common/imximage.cfg @@ -0,0 +1,30 @@ +/* + * i.MX image header offset values + * Copyright (C) 2013 Marek Vasut <marex@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + */ + +/* + * NOTE: This file must be kept in sync with tools/imximage.h because + * tools/imximage.c can not cross-include headers from arch/arm/ + * and vice-versa. + */ + +#ifndef __ASM_IMX_COMMON_IMXIMAGE_CFG__ +#define __ASM_IMX_COMMON_IMXIMAGE_CFG__ + +/* Standard image header offset for NAND, SATA, SD, SPI flash. */ +#define FLASH_OFFSET_STANDARD 0x400 +/* Specific image header offset for booting from OneNAND. */ +#define FLASH_OFFSET_ONENAND 0x100 +/* Specific image header offset for booting from memory-mapped NOR. */ +#define FLASH_OFFSET_NOR 0x1000 + +#endif /* __ASM_IMX_COMMON_IMXIMAGE_CFG__ */ diff --git a/arch/arm/include/asm/imx-common/iomux-v3.h b/arch/arm/include/asm/imx-common/iomux-v3.h index c34bb76..0b4e763 100644 --- a/arch/arm/include/asm/imx-common/iomux-v3.h +++ b/arch/arm/include/asm/imx-common/iomux-v3.h @@ -23,6 +23,8 @@ #ifndef __MACH_IOMUX_V3_H__ #define __MACH_IOMUX_V3_H__ +#include <common.h> + /* * build IOMUX_PAD structure * @@ -84,7 +86,68 @@ typedef u64 iomux_v3_cfg_t; ((iomux_v3_cfg_t)(sel_input_ofs) << MUX_SEL_INPUT_OFS_SHIFT)| \ ((iomux_v3_cfg_t)(sel_input) << MUX_SEL_INPUT_SHIFT)) +#define NEW_PAD_CTRL(cfg, pad) (((cfg) & ~MUX_PAD_CTRL_MASK) | \ + MUX_PAD_CTRL(pad)) + +#define __NA_ 0x000 +#define NO_MUX_I 0 +#define NO_PAD_I 0 + #define NO_PAD_CTRL (1 << 17) + +#ifdef CONFIG_MX6 + +#define PAD_CTL_HYS (1 << 16) + +#define PAD_CTL_PUS_100K_DOWN (0 << 14 | PAD_CTL_PUE) +#define PAD_CTL_PUS_47K_UP (1 << 14 | PAD_CTL_PUE) +#define PAD_CTL_PUS_100K_UP (2 << 14 | PAD_CTL_PUE) +#define PAD_CTL_PUS_22K_UP (3 << 14 | PAD_CTL_PUE) +#define PAD_CTL_PUE (1 << 13 | PAD_CTL_PKE) +#define PAD_CTL_PKE (1 << 12) + +#define PAD_CTL_ODE (1 << 11) + +#define PAD_CTL_SPEED_LOW (1 << 6) +#define PAD_CTL_SPEED_MED (2 << 6) +#define PAD_CTL_SPEED_HIGH (3 << 6) + +#define PAD_CTL_DSE_DISABLE (0 << 3) +#define PAD_CTL_DSE_240ohm (1 << 3) +#define PAD_CTL_DSE_120ohm (2 << 3) +#define PAD_CTL_DSE_80ohm (3 << 3) +#define PAD_CTL_DSE_60ohm (4 << 3) +#define PAD_CTL_DSE_48ohm (5 << 3) +#define PAD_CTL_DSE_40ohm (6 << 3) +#define PAD_CTL_DSE_34ohm (7 << 3) + +#else + +#define PAD_CTL_DVS (1 << 13) +#define PAD_CTL_INPUT_DDR (1 << 9) +#define PAD_CTL_HYS (1 << 8) + +#define PAD_CTL_PKE (1 << 7) +#define PAD_CTL_PUE (1 << 6 | PAD_CTL_PKE) +#define PAD_CTL_PUS_100K_DOWN (0 << 4 | PAD_CTL_PUE) +#define PAD_CTL_PUS_47K_UP (1 << 4 | PAD_CTL_PUE) +#define PAD_CTL_PUS_100K_UP (2 << 4 | PAD_CTL_PUE) +#define PAD_CTL_PUS_22K_UP (3 << 4 | PAD_CTL_PUE) + +#define PAD_CTL_ODE (1 << 3) + +#define PAD_CTL_DSE_LOW (0 << 1) +#define PAD_CTL_DSE_MED (1 << 1) +#define PAD_CTL_DSE_HIGH (2 << 1) +#define PAD_CTL_DSE_MAX (3 << 1) + +#endif + +#define PAD_CTL_SRE_SLOW (0 << 0) +#define PAD_CTL_SRE_FAST (1 << 0) + +#define IOMUX_CONFIG_SION 0x10 + #define GPIO_PIN_MASK 0x1f #define GPIO_PORT_SHIFT 5 #define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT) @@ -95,10 +158,8 @@ typedef u64 iomux_v3_cfg_t; #define GPIO_PORTE (4 << GPIO_PORT_SHIFT) #define GPIO_PORTF (5 << GPIO_PORT_SHIFT) -#define MUX_CONFIG_SION (0x1 << 4) - -int imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad); -int imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list, +void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad); +void imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list, unsigned count); #endif /* __MACH_IOMUX_V3_H__*/ diff --git a/arch/arm/include/asm/arch-mxs/regs-apbh.h b/arch/arm/include/asm/imx-common/regs-apbh.h index fcef4b8..bcec6e0 100644 --- a/arch/arm/include/asm/arch-mxs/regs-apbh.h +++ b/arch/arm/include/asm/imx-common/regs-apbh.h @@ -26,7 +26,7 @@ #ifndef __REGS_APBH_H__ #define __REGS_APBH_H__ -#include <asm/arch/regs-common.h> +#include <asm/imx-common/regs-common.h> #ifndef __ASSEMBLY__ @@ -109,7 +109,7 @@ struct mxs_apbh_regs { mxs_reg_32(hw_apbh_version) }; -#elif defined(CONFIG_MX28) +#elif (defined(CONFIG_MX28) || defined(CONFIG_MX6)) struct mxs_apbh_regs { mxs_reg_32(hw_apbh_ctrl0) mxs_reg_32(hw_apbh_ctrl1) @@ -288,6 +288,17 @@ struct mxs_apbh_regs { #define APBH_CTRL0_CLKGATE_CHANNEL_NAND7 0x0800 #define APBH_CTRL0_CLKGATE_CHANNEL_HSADC 0x1000 #define APBH_CTRL0_CLKGATE_CHANNEL_LCDIF 0x2000 +#elif defined(CONFIG_MX6) +#define APBH_CTRL0_CLKGATE_CHANNEL_OFFSET 0 +#define APBH_CTRL0_CLKGATE_CHANNEL_NAND0 0x0001 +#define APBH_CTRL0_CLKGATE_CHANNEL_NAND1 0x0002 +#define APBH_CTRL0_CLKGATE_CHANNEL_NAND2 0x0004 +#define APBH_CTRL0_CLKGATE_CHANNEL_NAND3 0x0008 +#define APBH_CTRL0_CLKGATE_CHANNEL_NAND4 0x0010 +#define APBH_CTRL0_CLKGATE_CHANNEL_NAND5 0x0020 +#define APBH_CTRL0_CLKGATE_CHANNEL_NAND6 0x0040 +#define APBH_CTRL0_CLKGATE_CHANNEL_NAND7 0x0080 +#define APBH_CTRL0_CLKGATE_CHANNEL_SSP 0x0100 #endif #define APBH_CTRL1_CH15_CMDCMPLT_IRQ_EN (1 << 31) @@ -393,6 +404,10 @@ struct mxs_apbh_regs { #define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_LCDIF 0x2000 #endif +#if defined(CONFIG_MX6) +#define APBH_CHANNEL_CTRL_RESET_CHANNEL_OFFSET 16 +#endif + #if defined(CONFIG_MX23) #define APBH_DEVSEL_CH7_MASK (0xf << 28) #define APBH_DEVSEL_CH7_OFFSET 28 diff --git a/arch/arm/include/asm/arch-mxs/regs-bch.h b/arch/arm/include/asm/imx-common/regs-bch.h index 40baa4d..dbe7ac8 100644 --- a/arch/arm/include/asm/arch-mxs/regs-bch.h +++ b/arch/arm/include/asm/imx-common/regs-bch.h @@ -26,7 +26,7 @@ #ifndef __MX28_REGS_BCH_H__ #define __MX28_REGS_BCH_H__ -#include <asm/arch/regs-common.h> +#include <asm/imx-common/regs-common.h> #ifndef __ASSEMBLY__ struct mxs_bch_regs { @@ -136,8 +136,13 @@ struct mxs_bch_regs { #define BCH_FLASHLAYOUT0_NBLOCKS_OFFSET 24 #define BCH_FLASHLAYOUT0_META_SIZE_MASK (0xff << 16) #define BCH_FLASHLAYOUT0_META_SIZE_OFFSET 16 +#if defined(CONFIG_MX6) +#define BCH_FLASHLAYOUT0_ECC0_MASK (0x1f << 11) +#define BCH_FLASHLAYOUT0_ECC0_OFFSET 11 +#else #define BCH_FLASHLAYOUT0_ECC0_MASK (0xf << 12) #define BCH_FLASHLAYOUT0_ECC0_OFFSET 12 +#endif #define BCH_FLASHLAYOUT0_ECC0_NONE (0x0 << 12) #define BCH_FLASHLAYOUT0_ECC0_ECC2 (0x1 << 12) #define BCH_FLASHLAYOUT0_ECC0_ECC4 (0x2 << 12) @@ -161,8 +166,13 @@ struct mxs_bch_regs { #define BCH_FLASHLAYOUT1_PAGE_SIZE_MASK (0xffff << 16) #define BCH_FLASHLAYOUT1_PAGE_SIZE_OFFSET 16 +#if defined(CONFIG_MX6) +#define BCH_FLASHLAYOUT1_ECCN_MASK (0x1f << 11) +#define BCH_FLASHLAYOUT1_ECCN_OFFSET 11 +#else #define BCH_FLASHLAYOUT1_ECCN_MASK (0xf << 12) #define BCH_FLASHLAYOUT1_ECCN_OFFSET 12 +#endif #define BCH_FLASHLAYOUT1_ECCN_NONE (0x0 << 12) #define BCH_FLASHLAYOUT1_ECCN_ECC2 (0x1 << 12) #define BCH_FLASHLAYOUT1_ECCN_ECC4 (0x2 << 12) diff --git a/arch/arm/include/asm/arch-mxs/regs-common.h b/arch/arm/include/asm/imx-common/regs-common.h index bcea419..bcea419 100644 --- a/arch/arm/include/asm/arch-mxs/regs-common.h +++ b/arch/arm/include/asm/imx-common/regs-common.h diff --git a/arch/arm/include/asm/arch-mxs/regs-gpmi.h b/arch/arm/include/asm/imx-common/regs-gpmi.h index 624d618..3409b94 100644 --- a/arch/arm/include/asm/arch-mxs/regs-gpmi.h +++ b/arch/arm/include/asm/imx-common/regs-gpmi.h @@ -26,7 +26,7 @@ #ifndef __MX28_REGS_GPMI_H__ #define __MX28_REGS_GPMI_H__ -#include <asm/arch/regs-common.h> +#include <asm/imx-common/regs-common.h> #ifndef __ASSEMBLY__ struct mxs_gpmi_regs { diff --git a/arch/arm/include/asm/omap_boot.h b/arch/arm/include/asm/omap_boot.h new file mode 100644 index 0000000..a803965 --- /dev/null +++ b/arch/arm/include/asm/omap_boot.h @@ -0,0 +1,50 @@ +/* + * (C) Copyright 2013 + * Texas Instruments, <www.ti.com> + * + * Sricharan R <r.sricharan@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* ROM code defines */ +/* Boot device */ +#define BOOT_DEVICE_MASK 0xFF +#define BOOT_DEVICE_OFFSET 0x8 +#define DEV_DESC_PTR_OFFSET 0x4 +#define DEV_DATA_PTR_OFFSET 0x18 +#define BOOT_MODE_OFFSET 0x8 +#define RESET_REASON_OFFSET 0x9 +#define CH_FLAGS_OFFSET 0xA + +#define CH_FLAGS_CHSETTINGS (0x1 << 0) +#define CH_FLAGS_CHRAM (0x1 << 1) +#define CH_FLAGS_CHFLASH (0x1 << 2) +#define CH_FLAGS_CHMMCSD (0x1 << 3) + +#ifndef __ASSEMBLY__ +struct omap_boot_parameters { + char *boot_message; + unsigned int mem_boot_descriptor; + unsigned char omap_bootdevice; + unsigned char reset_reason; + unsigned char ch_flags; + unsigned long omap_bootmode; +}; +#endif diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h index 091ddb5..ee7b188 100644 --- a/arch/arm/include/asm/omap_common.h +++ b/arch/arm/include/asm/omap_common.h @@ -25,6 +25,8 @@ #ifndef _OMAP_COMMON_H_ #define _OMAP_COMMON_H_ +#ifndef __ASSEMBLY__ + #include <common.h> #define NUM_SYS_CLKS 8 @@ -316,6 +318,7 @@ struct prcm_regs { u32 cm_wkupaon_io_srcomp_clkctrl; u32 prm_rstctrl; u32 prm_rstst; + u32 prm_rsttime; u32 prm_vc_val_bypass; u32 prm_vc_cfg_i2c_mode; u32 prm_vc_cfg_i2c_clk; @@ -557,6 +560,7 @@ static inline u32 omap_revision(void) extern u32 *const omap_si_rev; return *omap_si_rev; } +#endif /* * silicon revisions. @@ -583,4 +587,20 @@ static inline u32 omap_revision(void) /* DRA7XX */ #define DRA752_ES1_0 0x07520100 + +/* + * SRAM scratch space entries + */ +#define SRAM_SCRATCH_SPACE_ADDR NON_SECURE_SRAM_START +#define OMAP_SRAM_SCRATCH_OMAP_REV SRAM_SCRATCH_SPACE_ADDR +#define OMAP_SRAM_SCRATCH_EMIF_SIZE (SRAM_SCRATCH_SPACE_ADDR + 0x4) +#define OMAP_SRAM_SCRATCH_EMIF_T_NUM (SRAM_SCRATCH_SPACE_ADDR + 0xC) +#define OMAP_SRAM_SCRATCH_EMIF_T_DEN (SRAM_SCRATCH_SPACE_ADDR + 0x10) +#define OMAP_SRAM_SCRATCH_PRCM_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x14) +#define OMAP_SRAM_SCRATCH_DPLLS_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x18) +#define OMAP_SRAM_SCRATCH_VCORES_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x1C) +#define OMAP_SRAM_SCRATCH_SYS_CTRL (SRAM_SCRATCH_SPACE_ADDR + 0x20) +#define OMAP_SRAM_SCRATCH_BOOT_PARAMS (SRAM_SCRATCH_SPACE_ADDR + 0x24) +#define OMAP5_SRAM_SCRATCH_SPACE_END (SRAM_SCRATCH_SPACE_ADDR + 0x28) + #endif /* _OMAP_COMMON_H_ */ diff --git a/arch/powerpc/cpu/mpc512x/Makefile b/arch/powerpc/cpu/mpc512x/Makefile index b53232f..4f4c9ec 100644 --- a/arch/powerpc/cpu/mpc512x/Makefile +++ b/arch/powerpc/cpu/mpc512x/Makefile @@ -38,7 +38,6 @@ COBJS-y += serial.o COBJS-y += speed.o COBJS-$(CONFIG_FSL_DIU_FB) += diu.o COBJS-$(CONFIG_CMD_IDE) += ide.o -COBJS-$(CONFIG_IIM) += iim.o COBJS-$(CONFIG_PCI) += pci.o # Stub implementations of cache management functions for USB diff --git a/arch/powerpc/cpu/mpc512x/cpu_init.c b/arch/powerpc/cpu/mpc512x/cpu_init.c index b308cb4..0e20ded 100644 --- a/arch/powerpc/cpu/mpc512x/cpu_init.c +++ b/arch/powerpc/cpu/mpc512x/cpu_init.c @@ -201,7 +201,7 @@ void cpu_init_f (volatile immap_t * im) */ out_be32(&im->clk.sccr[0], SCCR1_CLOCKS_EN); out_be32(&im->clk.sccr[1], SCCR2_CLOCKS_EN); -#if defined(CONFIG_IIM) || defined(CONFIG_CMD_FUSE) +#if defined(CONFIG_FSL_IIM) || defined(CONFIG_CMD_FUSE) setbits_be32(&im->clk.sccr[1], CLOCK_SCCR2_IIM_EN); #endif } diff --git a/arch/powerpc/cpu/mpc512x/iim.c b/arch/powerpc/cpu/mpc512x/iim.c deleted file mode 100644 index abec8f6..0000000 --- a/arch/powerpc/cpu/mpc512x/iim.c +++ /dev/null @@ -1,394 +0,0 @@ -/* - * Copyright 2008 Silicon Turnkey Express, Inc. - * Martha Marx <mmarx@silicontkx.com> - * - * ADS5121 IIM (Fusebox) Interface - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <command.h> -#include <asm/io.h> - -#ifdef CONFIG_CMD_FUSE - -DECLARE_GLOBAL_DATA_PTR; - -static char cur_bank = '1'; - -char *iim_err_msg(u32 err) -{ - static char *IIM_errs[] = { - "Parity Error in cache", - "Explicit Sense Cycle Error", - "Write to Locked Register Error", - "Read Protect Error", - "Override Protect Error", - "Write Protect Error"}; - - int i; - - if (!err) - return ""; - for (i = 1; i < 8; i++) - if (err & (1 << i)) - printf("IIM - %s\n", IIM_errs[i-1]); - return ""; -} - -int in_range(int n, int min, int max, char *err, char *usg) -{ - if (n > max || n < min) { - printf(err); - printf("Usage:\n%s\n", usg); - return 0; - } - return 1; -} - -int ads5121_fuse_read(int bank, int fstart, int num) -{ - iim512x_t *iim = &((immap_t *) CONFIG_SYS_IMMR)->iim; - u32 *iim_fb, dummy; - int f, ctr; - - out_be32(&iim->err, in_be32(&iim->err)); - if (bank == 0) - iim_fb = (u32 *)&(iim->fbac0); - else - iim_fb = (u32 *)&(iim->fbac1); -/* try a read to see if Read Protect is set */ - dummy = in_be32(&iim_fb[0]); - if (in_be32(&iim->err) & IIM_ERR_RPE) { - printf("\tRead protect fuse is set\n"); - out_be32(&iim->err, IIM_ERR_RPE); - return 0; - } - printf("Reading Bank %d cache\n", bank); - for (f = fstart, ctr = 0; num > 0; ctr++, num--, f++) { - if (ctr % 4 == 0) - printf("F%2d:", f); - printf("\t%#04x", (u8)(iim_fb[f])); - if (ctr % 4 == 3) - printf("\n"); - } - if (ctr % 4 != 0) - printf("\n"); -} - -int ads5121_fuse_override(int bank, int f, u8 val) -{ - iim512x_t *iim = &((immap_t *) CONFIG_SYS_IMMR)->iim; - u32 *iim_fb; - u32 iim_stat; - int i; - - out_be32(&iim->err, in_be32(&iim->err)); - if (bank == 0) - iim_fb = (u32 *)&(iim->fbac0); - else - iim_fb = (u32 *)&(iim->fbac1); -/* try a read to see if Read Protect is set */ - iim_stat = in_be32(&iim_fb[0]); - if (in_be32(&iim->err) & IIM_ERR_RPE) { - printf("Read protect fuse is set on bank %d;" - "Override protect may also be set\n", bank); - printf("An attempt will be made to override\n"); - out_be32(&iim->err, IIM_ERR_RPE); - } - if (iim_stat & IIM_FBAC_FBOP) { - printf("Override protect fuse is set on bank %d\n", bank); - return 1; - } - if (f > IIM_FMAX) /* reset the entire bank */ - for (i = 0; i < IIM_FMAX + 1; i++) - out_be32(&iim_fb[i], 0); - else - out_be32(&iim_fb[f], val); - return 0; -} - -int ads5121_fuse_prog(cmd_tbl_t *cmdtp, int bank, char *fuseno_bitno) -{ - iim512x_t *iim = &((immap_t *) CONFIG_SYS_IMMR)->iim; - int f, i, bitno; - u32 stat, err; - - f = simple_strtol(fuseno_bitno, NULL, 10); - if (f == 0 && fuseno_bitno[0] != '0') - f = -1; - if (!in_range(f, 0, IIM_FMAX, - "<frow> must be between 0-31\n\n", cmdtp->usage)) - return 1; - bitno = -1; - for (i = 0; i < 6; i++) { - if (fuseno_bitno[i] == '_') { - bitno = simple_strtol(&(fuseno_bitno[i+1]), NULL, 10); - if (bitno == 0 && fuseno_bitno[i+1] != '0') - bitno = -1; - break; - } - } - if (!in_range(bitno, 0, 7, "Bit number ranges from 0-7\n" - "Example of <frow_bitno>: \"18_4\" sets bit 4 of row 18\n", - cmdtp->usage)) - return 1; - out_be32(&iim->err, in_be32(&iim->err)); - out_be32(&iim->prg_p, IIM_PRG_P_SET); - out_be32(&iim->ua, IIM_SET_UA(bank, f)); - out_be32(&iim->la, IIM_SET_LA(f, bitno)); -#ifdef DEBUG - printf("Programming disabled with DEBUG defined \n"); - printf(""Set up to pro - printf("iim.ua = %x; iim.la = %x\n", iim->ua, iim->la); -#else - out_be32(&iim->fctl, IIM_FCTL_PROG_PULSE | IIM_FCTL_PROG); - do - udelay(20); - while ((stat = in_be32(&iim->stat)) & IIM_STAT_BUSY); - out_be32(&iim->prg_p, 0); - err = in_be32(&iim->err); - if (stat & IIM_STAT_PRGD) { - if (!(err & (IIM_ERR_WPE | IIM_ERR_WPE))) { - printf("Fuse is successfully set"); - if (err) - printf(" - however there are other errors"); - printf("\n"); - } - iim->stat = 0; - } - if (err) { - iim_err_msg(err); - out_be32(&iim->err, in_be32(&iim->err)); - } -#endif -} - -int ads5121_fuse_sense(int bank, int fstart, int num) -{ - iim512x_t *iim = &((immap_t *) CONFIG_SYS_IMMR)->iim; - u32 iim_fbac; - u32 stat, err, err_hold = 0; - int f, ctr; - - out_be32(&iim->err, in_be32(&iim->err)); - if (bank == 0) - iim_fbac = in_be32(&iim->fbac0); - else - iim_fbac = in_be32(&iim->fbac1); - if (iim_fbac & IIM_FBAC_FBESP) { - printf("\tSense Protect disallows this operation\n"); - out_be32(&iim->err, IIM_FBAC_FBESP); - return 1; - } - err = in_be32(&iim->err); - if (err) { - iim_err_msg(err); - err_hold |= err; - } - if (err & IIM_ERR_RPE) - printf("\tRead protect fuse is set; " - "Sense Protect may be set but will be attempted\n"); - if (err) - out_be32(&iim->err, err); - printf("Sensing fuse(s) on Bank %d\n", bank); - for (f = fstart, ctr = 0; num > 0; ctr++, f++, num--) { - out_be32(&iim->ua, IIM_SET_UA(bank, f)); - out_be32(&iim->la, IIM_SET_LA(f, 0)); - out_be32(&iim->fctl, IIM_FCTL_ESNS_N); - do - udelay(20); - while ((stat = in_be32(&iim->stat)) & IIM_STAT_BUSY); - err = in_be32(&iim->err); - if (err & IIM_ERR_SNSE) { - iim_err_msg(err); - out_be32(&iim->err, IIM_ERR_SNSE); - return 1; - } - if (stat & IIM_STAT_SNSD) { - out_be32(&iim->stat, 0); - if (ctr % 4 == 0) - printf("F%2d:", f); - printf("\t%#04x", (u8)iim->sdat); - if (ctr % 4 == 3) - printf("\n"); - } - if (err) { - err_hold |= err; - out_be32(&iim->err, err); - } - } - if (ctr % 4 != 0) - printf("\n"); - if (err_hold) - iim_err_msg(err_hold); - - return 0; -} - -int ads5121_fuse_stat(int bank) -{ - iim512x_t *iim = &((immap_t *) CONFIG_SYS_IMMR)->iim; - u32 iim_fbac; - u32 err; - - out_be32(&iim->err, in_be32(&iim->err)); - if (bank == 0) - iim_fbac = in_be32(&iim->fbac0); - else - iim_fbac = in_be32(&iim->fbac1); - err = in_be32(&iim->err); - if (err) - iim_err_msg(err); - if (err & IIM_ERR_RPE || iim_fbac & IIM_FBAC_FBRP) { - if (iim_fbac == 0) - printf("Since protection settings can't be read - " - "try sensing fuse row 0;\n"); - return 0; - } - if (iim_fbac & IIM_PROTECTION) - printf("Protection Fuses Bank %d = %#04x:\n", bank, iim_fbac); - else if (!(err & IIM_ERR_RPE)) - printf("No Protection fuses are set\n"); - if (iim_fbac & IIM_FBAC_FBWP) - printf("\tWrite Protect fuse is set\n"); - if (iim_fbac & IIM_FBAC_FBOP) - printf("\tOverride Protect fuse is set\n"); - if (iim_fbac & IIM_FBAC_FBESP) - printf("\tSense Protect Fuse is set\n"); - out_be32(&iim->err, in_be32(&iim->err)); - - return 0; -} - -int do_ads5121_fuse(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - int frow, n, v, bank; - - if (cur_bank == '0') - bank = 0; - else - bank = 1; - - switch (argc) { - case 0: - case 1: - printf("Usage:\n%s\n", cmdtp->usage); - return 1; - case 2: - if (strncmp(argv[1], "stat", 4) == 0) - return ads5121_fuse_stat(bank); - if (strncmp(argv[1], "read", 4) == 0) - return ads5121_fuse_read(bank, 0, IIM_FMAX + 1); - if (strncmp(argv[1], "sense", 5) == 0) - return ads5121_fuse_sense(bank, 0, IIM_FMAX + 1); - if (strncmp(argv[1], "ovride", 6) == 0) - return ads5121_fuse_override(bank, IIM_FMAX + 1, 0); - if (strncmp(argv[1], "bank", 4) == 0) { - printf("Active Fuse Bank is %c\n", cur_bank); - return 0; - } - printf("Usage:\n%s\n", cmdtp->usage); - return 1; - case 3: - if (strncmp(argv[1], "bank", 4) == 0) { - if (argv[2][0] == '0') - cur_bank = '0'; - else if (argv[2][0] == '1') - cur_bank = '1'; - else { - printf("Usage:\n%s\n", cmdtp->usage); - return 1; - } - - printf("Setting Active Fuse Bank to %c\n", cur_bank); - return 0; - } - if (strncmp(argv[1], "prog", 4) == 0) - return ads5121_fuse_prog(cmdtp, bank, argv[2]); - - frow = (int)simple_strtol(argv[2], NULL, 10); - if (frow == 0 && argv[2][0] != '0') - frow = -1; - if (!in_range(frow, 0, IIM_FMAX, - "<frow> must be between 0-31\n\n", cmdtp->usage)) - return 1; - if (strncmp(argv[1], "read", 4) == 0) - return ads5121_fuse_read(bank, frow, 1); - if (strncmp(argv[1], "ovride", 6) == 0) - return ads5121_fuse_override(bank, frow, 0); - if (strncmp(argv[1], "sense", 5) == 0) - return ads5121_fuse_sense(bank, frow, 1); - printf("Usage:\n%s\n", cmdtp->usage); - return 1; - case 4: - frow = (int)simple_strtol(argv[2], NULL, 10); - if (frow == 0 && argv[2][0] != '0') - frow = -1; - if (!in_range(frow, 0, IIM_FMAX, - "<frow> must be between 0-31\n\n", cmdtp->usage)) - return 1; - if (strncmp(argv[1], "read", 4) == 0) { - n = (int)simple_strtol(argv[3], NULL, 10); - if (!in_range(frow + n, frow + 1, IIM_FMAX + 1, - "<frow>+<n> must be between 1-32\n\n", - cmdtp->usage)) - return 1; - return ads5121_fuse_read(bank, frow, n); - } - if (strncmp(argv[1], "ovride", 6) == 0) { - v = (int)simple_strtol(argv[3], NULL, 10); - return ads5121_fuse_override(bank, frow, v); - } - if (strncmp(argv[1], "sense", 5) == 0) { - n = (int)simple_strtol(argv[3], NULL, 10); - if (!in_range(frow + n, frow + 1, IIM_FMAX + 1, - "<frow>+<n> must be between 1-32\n\n", - cmdtp->usage)) - return 1; - return ads5121_fuse_sense(bank, frow, n); - } - printf("Usage:\n%s\n", cmdtp->usage); - return 1; - default: /* at least 5 args */ - printf("Usage:\n%s\n", cmdtp->usage); - return 1; - } -} - -U_BOOT_CMD( - fuse, CONFIG_SYS_MAXARGS, 0, do_ads5121_fuse, - " - Read, Sense, Override or Program Fuses\n", - "bank <n> - sets active Fuse Bank to 0 or 1\n" - " no args shows current active bank\n" - "fuse stat - print active fuse bank's protection status\n" - "fuse read [<frow> [<n>]] - print <n> fuse rows starting at <frow>\n" - " no args to print entire bank's fuses\n" - "fuse ovride [<frow> [<v>]]- override fuses at <frow> with <v>\n" - " no <v> defaults to 0 for the row\n" - " no args resets entire bank to 0\n" - " NOTE - settings persist until hard reset\n" - "fuse sense [<frow>] - senses current fuse at <frow>\n" - " no args for entire bank\n" - "fuse prog <frow_bit> - program fuse at row <frow>, bit <_bit>\n" - " <frow> is 0-31, <bit> is 0-7; eg. 13_2 \n" - " WARNING - this is permanent" -); -#endif /* CONFIG_CMD_FUSE */ diff --git a/arch/powerpc/include/asm/immap_512x.h b/arch/powerpc/include/asm/immap_512x.h index d96e536..8248219 100644 --- a/arch/powerpc/include/asm/immap_512x.h +++ b/arch/powerpc/include/asm/immap_512x.h @@ -1272,4 +1272,6 @@ static inline u32 get_pata_base (void) #define CONFIG_SYS_MPC512x_USB_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC512x_USB_OFFSET) +#define IIM_BASE_ADDR (CONFIG_SYS_IMMR + offsetof(immap_t, iim)) + #endif /* __IMMAP_512x__ */ diff --git a/board/CarMediaLab/flea3/flea3.c b/board/CarMediaLab/flea3/flea3.c index f2b4284..af5338e 100644 --- a/board/CarMediaLab/flea3/flea3.c +++ b/board/CarMediaLab/flea3/flea3.c @@ -29,8 +29,7 @@ #include <asm/errno.h> #include <asm/arch/imx-regs.h> #include <asm/arch/crm_regs.h> -#include <asm/arch/mx35_pins.h> -#include <asm/arch/iomux.h> +#include <asm/arch/iomux-mx35.h> #include <i2c.h> #include <linux/types.h> #include <asm/gpio.h> @@ -165,62 +164,68 @@ static void board_setup_sdram(void) static void setup_iomux_uart3(void) { - mxc_request_iomux(MX35_PIN_RTS2, MUX_CONFIG_ALT7); - mxc_request_iomux(MX35_PIN_CTS2, MUX_CONFIG_ALT7); + static const iomux_v3_cfg_t uart3_pads[] = { + MX35_PAD_RTS2__UART3_RXD_MUX, + MX35_PAD_CTS2__UART3_TXD_MUX, + }; + + imx_iomux_v3_setup_multiple_pads(uart3_pads, ARRAY_SIZE(uart3_pads)); } +#define I2C_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN | PAD_CTL_ODE) + static void setup_iomux_i2c(void) { - int pad; - - mxc_request_iomux(MX35_PIN_I2C1_CLK, MUX_CONFIG_SION); - mxc_request_iomux(MX35_PIN_I2C1_DAT, MUX_CONFIG_SION); - - pad = (PAD_CTL_HYS_SCHMITZ | PAD_CTL_PKE_ENABLE \ - | PAD_CTL_PUE_PUD | PAD_CTL_ODE_OpenDrain); + static const iomux_v3_cfg_t i2c_pads[] = { + NEW_PAD_CTRL(MX35_PAD_I2C1_CLK__I2C1_SCL, I2C_PAD_CTRL), + NEW_PAD_CTRL(MX35_PAD_I2C1_DAT__I2C1_SDA, I2C_PAD_CTRL), - mxc_iomux_set_pad(MX35_PIN_I2C1_CLK, pad); - mxc_iomux_set_pad(MX35_PIN_I2C1_DAT, pad); + NEW_PAD_CTRL(MX35_PAD_TX3_RX2__I2C3_SCL, I2C_PAD_CTRL), + NEW_PAD_CTRL(MX35_PAD_TX2_RX3__I2C3_SDA, I2C_PAD_CTRL), + }; - mxc_request_iomux(MX35_PIN_TX3_RX2, MUX_CONFIG_ALT1); - mxc_request_iomux(MX35_PIN_TX2_RX3, MUX_CONFIG_ALT1); - - mxc_iomux_set_pad(MX35_PIN_TX3_RX2, pad); - mxc_iomux_set_pad(MX35_PIN_TX2_RX3, pad); + imx_iomux_v3_setup_multiple_pads(i2c_pads, ARRAY_SIZE(i2c_pads)); } static void setup_iomux_spi(void) { - mxc_request_iomux(MX35_PIN_CSPI1_MOSI, MUX_CONFIG_SION); - mxc_request_iomux(MX35_PIN_CSPI1_MISO, MUX_CONFIG_SION); - mxc_request_iomux(MX35_PIN_CSPI1_SS0, MUX_CONFIG_SION); - mxc_request_iomux(MX35_PIN_CSPI1_SS1, MUX_CONFIG_SION); - mxc_request_iomux(MX35_PIN_CSPI1_SCLK, MUX_CONFIG_SION); + static const iomux_v3_cfg_t spi_pads[] = { + MX35_PAD_CSPI1_MOSI__CSPI1_MOSI, + MX35_PAD_CSPI1_MISO__CSPI1_MISO, + MX35_PAD_CSPI1_SS0__CSPI1_SS0, + MX35_PAD_CSPI1_SS1__CSPI1_SS1, + MX35_PAD_CSPI1_SCLK__CSPI1_SCLK, + }; + + imx_iomux_v3_setup_multiple_pads(spi_pads, ARRAY_SIZE(spi_pads)); } static void setup_iomux_fec(void) { - /* setup pins for FEC */ - mxc_request_iomux(MX35_PIN_FEC_TX_CLK, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_RX_CLK, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_RX_DV, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_COL, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_RDATA0, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_TDATA0, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_TX_EN, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_MDC, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_MDIO, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_TX_ERR, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_RX_ERR, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_CRS, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_RDATA1, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_TDATA1, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_RDATA2, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_TDATA2, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_RDATA3, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_TDATA3, MUX_CONFIG_FUNC); + static const iomux_v3_cfg_t fec_pads[] = { + MX35_PAD_FEC_TX_CLK__FEC_TX_CLK, + MX35_PAD_FEC_RX_CLK__FEC_RX_CLK, + MX35_PAD_FEC_RX_DV__FEC_RX_DV, + MX35_PAD_FEC_COL__FEC_COL, + MX35_PAD_FEC_RDATA0__FEC_RDATA_0, + MX35_PAD_FEC_TDATA0__FEC_TDATA_0, + MX35_PAD_FEC_TX_EN__FEC_TX_EN, + MX35_PAD_FEC_MDC__FEC_MDC, + MX35_PAD_FEC_MDIO__FEC_MDIO, + MX35_PAD_FEC_TX_ERR__FEC_TX_ERR, + MX35_PAD_FEC_RX_ERR__FEC_RX_ERR, + MX35_PAD_FEC_CRS__FEC_CRS, + MX35_PAD_FEC_RDATA1__FEC_RDATA_1, + MX35_PAD_FEC_TDATA1__FEC_TDATA_1, + MX35_PAD_FEC_RDATA2__FEC_RDATA_2, + MX35_PAD_FEC_TDATA2__FEC_TDATA_2, + MX35_PAD_FEC_RDATA3__FEC_RDATA_3, + MX35_PAD_FEC_TDATA3__FEC_TDATA_3, + }; + /* setup pins for FEC */ + imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads)); } int board_early_init_f(void) @@ -229,7 +234,7 @@ int board_early_init_f(void) (struct ccm_regs *)IMX_CCM_BASE; /* setup GPIO3_1 to set HighVCore signal */ - mxc_request_iomux(MX35_PIN_ATA_DA1, MUX_CONFIG_ALT5); + imx_iomux_v3_setup_pad(MX35_PAD_ATA_DA1__GPIO3_1); gpio_direction_output(65, 1); /* initialize PLL and clock configuration */ diff --git a/board/Seagate/goflexhome/Makefile b/board/Seagate/goflexhome/Makefile new file mode 100644 index 0000000..9948fe2 --- /dev/null +++ b/board/Seagate/goflexhome/Makefile @@ -0,0 +1,51 @@ +# +# Copyright (C) 2013 Suriyan Ramasami <suriyan.r@gmail.com> +# +# Based on dockstar/Makefile originally written by +# Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu> +# +# Based on sheevaplug/Makefile originally written by +# Prafulla Wadaskar <prafulla@marvell.com> +# (C) Copyright 2009 +# Marvell Semiconductor <www.marvell.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, +# MA 02110-1301 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS := goflexhome.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS) $(SOBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/Seagate/goflexhome/goflexhome.c b/board/Seagate/goflexhome/goflexhome.c new file mode 100644 index 0000000..17c1905 --- /dev/null +++ b/board/Seagate/goflexhome/goflexhome.c @@ -0,0 +1,189 @@ +/* + * Copyright (C) 2013 Suriyan Ramasami <suriyan.r@gmail.com> + * + * Based on dockstar.c originally written by + * Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu> + * + * Based on sheevaplug.c originally written by + * Prafulla Wadaskar <prafulla@marvell.com> + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <common.h> +#include <miiphy.h> +#include <asm/arch/kirkwood.h> +#include <asm/arch/mpp.h> +#include <asm/arch/cpu.h> +#include <asm/io.h> + +DECLARE_GLOBAL_DATA_PTR; + +int board_early_init_f(void) +{ + /* Multi-Purpose Pins Functionality configuration */ + static const u32 kwmpp_config[] = { + MPP0_NF_IO2, + MPP1_NF_IO3, + MPP2_NF_IO4, + MPP3_NF_IO5, + MPP4_NF_IO6, + MPP5_NF_IO7, + MPP6_SYSRST_OUTn, + MPP7_GPO, + MPP8_UART0_RTS, + MPP9_UART0_CTS, + MPP10_UART0_TXD, + MPP11_UART0_RXD, + MPP12_SD_CLK, + MPP13_SD_CMD, + MPP14_SD_D0, + MPP15_SD_D1, + MPP16_SD_D2, + MPP17_SD_D3, + MPP18_NF_IO0, + MPP19_NF_IO1, + MPP20_GPIO, + MPP21_GPIO, + MPP22_GPIO, + MPP23_GPIO, + MPP24_GPIO, + MPP25_GPIO, + MPP26_GPIO, + MPP27_GPIO, + MPP28_GPIO, + MPP29_TSMP9, + MPP30_GPIO, + MPP31_GPIO, + MPP32_GPIO, + MPP33_GPIO, + MPP34_GPIO, + MPP35_GPIO, + MPP36_GPIO, + MPP37_GPIO, + MPP38_GPIO, + MPP39_GPIO, + MPP40_GPIO, + MPP41_GPIO, + MPP42_GPIO, + MPP43_GPIO, + MPP44_GPIO, + MPP45_GPIO, + MPP46_GPIO, + MPP47_GPIO, + MPP48_GPIO, + MPP49_GPIO, + 0 + }; + + /* + * default gpio configuration + * There are maximum 64 gpios controlled through 2 sets of registers + * the below configuration configures mainly initial LED status + */ + kw_config_gpio(GOFLEXHOME_OE_VAL_LOW, + GOFLEXHOME_OE_VAL_HIGH, + GOFLEXHOME_OE_LOW, GOFLEXHOME_OE_HIGH); + kirkwood_mpp_conf(kwmpp_config, NULL); + return 0; +} + +int board_init(void) +{ + /* + * arch number of board + */ + gd->bd->bi_arch_number = MACH_TYPE_GOFLEXHOME; + + /* address of boot parameters */ + gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100; + + return 0; +} + +#ifdef CONFIG_RESET_PHY_R +/* Configure and enable MV88E1116 PHY */ +void reset_phy(void) +{ + u16 reg; + u16 devadr; + char *name = "egiga0"; + + if (miiphy_set_current_dev(name)) + return; + + /* command to read PHY dev address */ + if (miiphy_read(name, 0xEE, 0xEE, (u16 *)&devadr)) { + printf("Err..%s could not read PHY dev address\n", + __func__); + return; + } + + /* + * Enable RGMII delay on Tx and Rx for CPU port + * Ref: sec 4.7.2 of chip datasheet + */ + miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2); + miiphy_read(name, devadr, MV88E1116_MAC_CTRL_REG, ®); + reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL); + miiphy_write(name, devadr, MV88E1116_MAC_CTRL_REG, reg); + miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0); + + /* reset the phy */ + miiphy_reset(name, devadr); + + printf("88E1116 Initialized on %s\n", name); +} +#endif /* CONFIG_RESET_PHY_R */ + +#define GREEN_LED (1 << 14) +#define ORANGE_LED (1 << 15) +#define BOTH_LEDS (GREEN_LED | ORANGE_LED) +#define NEITHER_LED 0 + +static void set_leds(u32 leds, u32 blinking) +{ + struct kwgpio_registers *r; + u32 oe; + u32 bl; + + r = (struct kwgpio_registers *)KW_GPIO1_BASE; + oe = readl(&r->oe) | BOTH_LEDS; + writel(oe & ~leds, &r->oe); /* active low */ + bl = readl(&r->blink_en) & ~BOTH_LEDS; + writel(bl | blinking, &r->blink_en); +} + +void show_boot_progress(int val) +{ + switch (val) { + case BOOTSTAGE_ID_RUN_OS: /* booting Linux */ + set_leds(BOTH_LEDS, NEITHER_LED); + break; + case BOOTSTAGE_ID_NET_ETH_START: /* Ethernet initialization */ + set_leds(GREEN_LED, GREEN_LED); + break; + default: + if (val < 0) /* error */ + set_leds(ORANGE_LED, ORANGE_LED); + break; + } +} diff --git a/board/Seagate/goflexhome/kwbimage.cfg b/board/Seagate/goflexhome/kwbimage.cfg new file mode 100644 index 0000000..e984d72 --- /dev/null +++ b/board/Seagate/goflexhome/kwbimage.cfg @@ -0,0 +1,168 @@ +# +# Copyright (C) 2013 Suriyan Ramasami <suriyan.r@gmail.com> +# +# Based on dockstar/kwbimage.cfg originally written by +# Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu> +# +# Based on sheevaplug/kwbimage.cfg originally written by +# Prafulla Wadaskar <prafulla@marvell.com> +# (C) Copyright 2009 +# Marvell Semiconductor <www.marvell.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, +# MA 02110-1301 USA +# +# Refer docs/README.kwimage for more details about how-to configure +# and create kirkwood boot image +# + +# Boot Media configurations +BOOT_FROM nand +NAND_ECC_MODE default +NAND_PAGE_SIZE 0x0800 + +# SOC registers configuration using bootrom header extension +# Maximum KWBIMAGE_MAX_CONFIG configurations allowed + +# Configure RGMII-0 interface pad voltage to 1.8V +DATA 0xFFD100e0 0x1b1b1b9b + +#Dram initalization for SINGLE x16 CL=5 @ 400MHz +DATA 0xFFD01400 0x43000c30 # DDR Configuration register +# bit13-0: 0xc30 (3120 DDR2 clks refresh rate) +# bit23-14: zero +# bit24: 1= enable exit self refresh mode on DDR access +# bit25: 1 required +# bit29-26: zero +# bit31-30: 01 + +DATA 0xFFD01404 0x37543000 # DDR Controller Control Low +# bit 4: 0=addr/cmd in smame cycle +# bit 5: 0=clk is driven during self refresh, we don't care for APX +# bit 6: 0=use recommended falling edge of clk for addr/cmd +# bit14: 0=input buffer always powered up +# bit18: 1=cpu lock transaction enabled +# bit23-20: 5=recommended value for CL=5 and STARTBURST_DEL disabled bit31=0 +# bit27-24: 7= CL+2, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM +# bit30-28: 3 required +# bit31: 0=no additional STARTBURST delay + +DATA 0xFFD01408 0x22125451 # DDR Timing (Low) (active cycles value +1) +# bit3-0: TRAS lsbs +# bit7-4: TRCD +# bit11- 8: TRP +# bit15-12: TWR +# bit19-16: TWTR +# bit20: TRAS msb +# bit23-21: 0x0 +# bit27-24: TRRD +# bit31-28: TRTP + +DATA 0xFFD0140C 0x00000a33 # DDR Timing (High) +# bit6-0: TRFC +# bit8-7: TR2R +# bit10-9: TR2W +# bit12-11: TW2W +# bit31-13: zero required + +DATA 0xFFD01410 0x0000000d # DDR Address Control +# bit1-0: 00, Cs0width=x8 +# bit3-2: 11, Cs0size=1Gb +# bit5-4: 00, Cs1width=nonexistent +# bit7-6: 00, Cs1size =nonexistent +# bit9-8: 00, Cs2width=nonexistent +# bit11-10: 00, Cs2size =nonexistent +# bit13-12: 00, Cs3width=nonexistent +# bit15-14: 00, Cs3size =nonexistent +# bit16: 0, Cs0AddrSel +# bit17: 0, Cs1AddrSel +# bit18: 0, Cs2AddrSel +# bit19: 0, Cs3AddrSel +# bit31-20: 0 required + +DATA 0xFFD01414 0x00000000 # DDR Open Pages Control +# bit0: 0, OpenPage enabled +# bit31-1: 0 required + +DATA 0xFFD01418 0x00000000 # DDR Operation +# bit3-0: 0x0, DDR cmd +# bit31-4: 0 required + +DATA 0xFFD0141C 0x00000C52 # DDR Mode +# bit2-0: 2, BurstLen=2 required +# bit3: 0, BurstType=0 required +# bit6-4: 4, CL=5 +# bit7: 0, TestMode=0 normal +# bit8: 0, DLL reset=0 normal +# bit11-9: 6, auto-precharge write recovery ???????????? +# bit12: 0, PD must be zero +# bit31-13: 0 required + +DATA 0xFFD01420 0x00000040 # DDR Extended Mode +# bit0: 0, DDR DLL enabled +# bit1: 0, DDR drive strenght normal +# bit2: 0, DDR ODT control lsd (disabled) +# bit5-3: 000, required +# bit6: 1, DDR ODT control msb, (disabled) +# bit9-7: 000, required +# bit10: 0, differential DQS enabled +# bit11: 0, required +# bit12: 0, DDR output buffer enabled +# bit31-13: 0 required + +DATA 0xFFD01424 0x0000F17F # DDR Controller Control High +# bit2-0: 111, required +# bit3 : 1 , MBUS Burst Chop disabled +# bit6-4: 111, required +# bit7 : 0 +# bit8 : 1 , add writepath sample stage, must be 1 for DDR freq >= 300MHz +# bit9 : 0 , no half clock cycle addition to dataout +# bit10 : 0 , 1/4 clock cycle skew enabled for addr/ctl signals +# bit11 : 0 , 1/4 clock cycle skew disabled for write mesh +# bit15-12: 1111 required +# bit31-16: 0 required + +DATA 0xFFD01428 0x00085520 # DDR2 ODT Read Timing (default values) +DATA 0xFFD0147C 0x00008552 # DDR2 ODT Write Timing (default values) + +DATA 0xFFD01500 0x00000000 # CS[0]n Base address to 0x0 +DATA 0xFFD01504 0x07FFFFF1 # CS[0]n Size +# bit0: 1, Window enabled +# bit1: 0, Write Protect disabled +# bit3-2: 00, CS0 hit selected +# bit23-4: ones, required +# bit31-24: 0x07, Size (i.e. 128MB) + +DATA 0xFFD01508 0x10000000 # CS[1]n Base address to 256Mb +DATA 0xFFD0150C 0x00000000 # CS[1]n Size, window disabled + +DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled +DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled + +DATA 0xFFD01494 0x00030000 # DDR ODT Control (Low) +DATA 0xFFD01498 0x00000000 # DDR ODT Control (High) +# bit1-0: 00, ODT0 controlled by ODT Control (low) register above +# bit3-2: 01, ODT1 active NEVER! +# bit31-4: zero, required + +DATA 0xFFD0149C 0x0000E803 # CPU ODT Control +DATA 0xFFD01480 0x00000001 # DDR Initialization Control +#bit0=1, enable DDR init upon this register write + +# End of Header extension +DATA 0x0 0x0 diff --git a/board/armltd/vexpress/Makefile b/board/armltd/vexpress/Makefile index 8749590..6719f3d 100644 --- a/board/armltd/vexpress/Makefile +++ b/board/armltd/vexpress/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o -COBJS := ca9x4_ct_vxp.o +COBJS := vexpress_common.o SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/armltd/vexpress/ca9x4_ct_vxp.c b/board/armltd/vexpress/vexpress_common.c index d5e109e..2c54869 100644 --- a/board/armltd/vexpress/ca9x4_ct_vxp.c +++ b/board/armltd/vexpress/vexpress_common.c @@ -45,8 +45,7 @@ static ulong timestamp; static ulong lastdec; -static struct wdt *wdt_base = (struct wdt *)WDT_BASE; -static struct systimer *systimer_base = (struct systimer *)SYSTIMER_BASE; +static struct systimer *systimer_base = (struct systimer *)V2M_TIMER01; static struct sysctrl *sysctrl_base = (struct sysctrl *)SCTL_BASE; static void flash__init(void); @@ -166,20 +165,38 @@ static void vexpress_timer_init(void) */ writel(SYSTIMER_RELOAD, &systimer_base->timer0load); writel(SYSTIMER_RELOAD, &systimer_base->timer0value); - writel(SYSTIMER_EN | SYSTIMER_32BIT | \ - readl(&systimer_base->timer0control), \ + writel(SYSTIMER_EN | SYSTIMER_32BIT | + readl(&systimer_base->timer0control), &systimer_base->timer0control); reset_timer_masked(); } +int v2m_cfg_write(u32 devfn, u32 data) +{ + /* Configuration interface broken? */ + u32 val; + + devfn |= SYS_CFG_START | SYS_CFG_WRITE; + + val = readl(V2M_SYS_CFGSTAT); + writel(val & ~SYS_CFG_COMPLETE, V2M_SYS_CFGSTAT); + + writel(data, V2M_SYS_CFGDATA); + writel(devfn, V2M_SYS_CFGCTRL); + + do { + val = readl(V2M_SYS_CFGSTAT); + } while (val == 0); + + return !!(val & SYS_CFG_ERR); +} + /* Use the ARM Watchdog System to cause reset */ void reset_cpu(ulong addr) { - writeb(WDT_EN, &wdt_base->wdogcontrol); - writel(WDT_RESET_LOAD, &wdt_base->wdogload); - while (1) - ; + if (v2m_cfg_write(SYS_CFG_REBOOT | SYS_CFG_SITE_MB, 0)) + printf("Unable to reboot\n"); } /* @@ -251,7 +268,7 @@ unsigned long long get_ticks(void) return get_timer(0); } -ulong get_tbclk (void) +ulong get_tbclk(void) { return (ulong)CONFIG_SYS_HZ; } diff --git a/board/atmel/at91sam9260ek/at91sam9260ek.c b/board/atmel/at91sam9260ek/at91sam9260ek.c index 3aa394a..8d3fc75 100644 --- a/board/atmel/at91sam9260ek/at91sam9260ek.c +++ b/board/atmel/at91sam9260ek/at91sam9260ek.c @@ -30,6 +30,7 @@ #include <asm/arch/at91_pmc.h> #include <asm/arch/at91_rstc.h> #include <asm/arch/gpio.h> +#include <atmel_mci.h> #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) # include <net.h> @@ -143,6 +144,15 @@ static void at91sam9260ek_macb_hw_init(void) } #endif +#ifdef CONFIG_GENERIC_ATMEL_MCI +int board_mmc_init(bd_t *bd) +{ + at91_mci_hw_init(); + + return atmel_mci_init((void *)ATMEL_BASE_MCI); +} +#endif + int board_early_init_f(void) { struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; @@ -157,18 +167,6 @@ int board_early_init_f(void) int board_init(void) { -#ifdef CONFIG_AT91SAM9G20EK_2MMC - /* arch number of AT91SAM9G20EK_2MMC-Board */ - gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G20EK_2MMC; -#else -#ifdef CONFIG_AT91SAM9G20EK - /* arch number of AT91SAM9G20EK-Board */ - gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G20EK; -#else - /* arch number of AT91SAM9260EK-Board */ - gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9260EK; -#endif -#endif /* adress of boot parameters */ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; diff --git a/board/atmel/at91sam9n12ek/Makefile b/board/atmel/at91sam9n12ek/Makefile new file mode 100644 index 0000000..3aa67d5 --- /dev/null +++ b/board/atmel/at91sam9n12ek/Makefile @@ -0,0 +1,52 @@ +# +# (C) Copyright 2003-2008 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2008 +# Stelian Pop <stelian.pop@leadtechdesign.com> +# Lead Tech Design <www.leadtechdesign.com> +# +# (C) Copyright 2013 +# Josh Wu <josh.wu@atmel.com> +# Atmel corporation <www.atmel.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS-y += at91sam9n12ek.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS) $(SOBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/atmel/at91sam9n12ek/at91sam9n12ek.c b/board/atmel/at91sam9n12ek/at91sam9n12ek.c new file mode 100644 index 0000000..8752794 --- /dev/null +++ b/board/atmel/at91sam9n12ek/at91sam9n12ek.c @@ -0,0 +1,228 @@ +/* + * (C) Copyright 2013 Atmel Corporation + * Josh Wu <josh.wu@atmel.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/at91sam9x5_matrix.h> +#include <asm/arch/at91sam9_smc.h> +#include <asm/arch/at91_common.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/at91_rstc.h> +#include <asm/arch/at91_pio.h> +#include <asm/arch/clk.h> +#include <lcd.h> +#include <atmel_hlcdc.h> +#include <atmel_mci.h> + +#ifdef CONFIG_LCD_INFO +#include <nand.h> +#include <version.h> +#endif + +DECLARE_GLOBAL_DATA_PTR; + +/* ------------------------------------------------------------------------- */ +/* + * Miscelaneous platform dependent initialisations + */ +#ifdef CONFIG_NAND_ATMEL +static void at91sam9n12ek_nand_hw_init(void) +{ + struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC; + struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX; + unsigned long csa; + + /* Assign CS3 to NAND/SmartMedia Interface */ + csa = readl(&matrix->ebicsa); + csa |= AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA; + /* Configure databus */ + csa &= ~AT91_MATRIX_NFD0_ON_D16; /* nandflash connect to D0~D15 */ + /* Configure IO drive */ + csa &= ~AT91_MATRIX_EBI_EBI_IOSR_NORMAL; + + writel(csa, &matrix->ebicsa); + + /* Configure SMC CS3 for NAND/SmartMedia */ + writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) | + AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(0), + &smc->cs[3].setup); + writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(5) | + AT91_SMC_PULSE_NRD(4) | AT91_SMC_PULSE_NCS_RD(6), + &smc->cs[3].pulse); + writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(7), + &smc->cs[3].cycle); + writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | + AT91_SMC_MODE_EXNW_DISABLE | +#ifdef CONFIG_SYS_NAND_DBW_16 + AT91_SMC_MODE_DBW_16 | +#else /* CONFIG_SYS_NAND_DBW_8 */ + AT91_SMC_MODE_DBW_8 | +#endif + AT91_SMC_MODE_TDF_CYCLE(1), + &smc->cs[3].mode); + + /* Configure RDY/BSY pin */ + at91_set_pio_input(AT91_PIO_PORTD, 5, 1); + + /* Configure ENABLE pin for NandFlash */ + at91_set_pio_output(AT91_PIO_PORTD, 4, 1); + + at91_set_a_periph(AT91_PIO_PORTD, 0, 1); /* NAND OE */ + at91_set_a_periph(AT91_PIO_PORTD, 1, 1); /* NAND WE */ + at91_set_a_periph(AT91_PIO_PORTD, 2, 1); /* ALE */ + at91_set_a_periph(AT91_PIO_PORTD, 3, 1); /* CLE */ +} +#endif + +#ifdef CONFIG_LCD +vidinfo_t panel_info = { + .vl_col = 480, + .vl_row = 272, + .vl_clk = 9000000, + .vl_bpix = LCD_BPP, + .vl_sync = 0, + .vl_tft = 1, + .vl_hsync_len = 5, + .vl_left_margin = 8, + .vl_right_margin = 43, + .vl_vsync_len = 10, + .vl_upper_margin = 4, + .vl_lower_margin = 12, + .mmio = ATMEL_BASE_LCDC, +}; + +void lcd_enable(void) +{ + at91_set_pio_output(AT91_PIO_PORTC, 25, 0); /* power up */ +} + +void lcd_disable(void) +{ + at91_set_pio_output(AT91_PIO_PORTC, 25, 1); /* power down */ +} + +#ifdef CONFIG_LCD_INFO +void lcd_show_board_info(void) +{ + ulong dram_size, nand_size; + int i; + char temp[32]; + + lcd_printf("%s\n", U_BOOT_VERSION); + lcd_printf("ATMEL Corp\n"); + lcd_printf("at91@atmel.com\n"); + lcd_printf("%s CPU at %s MHz\n", + ATMEL_CPU_NAME, + strmhz(temp, get_cpu_clk_rate())); + + dram_size = 0; + for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) + dram_size += gd->bd->bi_dram[i].size; + nand_size = 0; + for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) + nand_size += nand_info[i].size; + lcd_printf(" %ld MB SDRAM, %ld MB NAND\n", + dram_size >> 20, + nand_size >> 20); +} +#endif /* CONFIG_LCD_INFO */ +#endif /* CONFIG_LCD */ + +/* SPI chip select control */ +#ifdef CONFIG_ATMEL_SPI +#include <spi.h> +int spi_cs_is_valid(unsigned int bus, unsigned int cs) +{ + return bus == 0 && cs < 2; +} + +void spi_cs_activate(struct spi_slave *slave) +{ + switch (slave->cs) { + case 0: + at91_set_pio_output(AT91_PIO_PORTA, 14, 0); + break; + case 1: + at91_set_pio_output(AT91_PIO_PORTA, 7, 0); + break; + } +} + +void spi_cs_deactivate(struct spi_slave *slave) +{ + switch (slave->cs) { + case 0: + at91_set_pio_output(AT91_PIO_PORTA, 14, 1); + break; + case 1: + at91_set_pio_output(AT91_PIO_PORTA, 7, 1); + break; + } +} +#endif /* CONFIG_ATMEL_SPI */ + +#ifdef CONFIG_GENERIC_ATMEL_MCI +int board_mmc_init(bd_t *bd) +{ + at91_mci_hw_init(); + + return atmel_mci_init((void *)ATMEL_BASE_HSMCI0); +} +#endif + +int board_early_init_f(void) +{ + /* Enable clocks for all PIOs */ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + writel((1 << ATMEL_ID_PIOAB) | (1 << ATMEL_ID_PIOCD), &pmc->pcer); + + at91_seriald_hw_init(); + return 0; +} + +int board_init(void) +{ + /* adress of boot parameters */ + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; + +#ifdef CONFIG_NAND_ATMEL + at91sam9n12ek_nand_hw_init(); +#endif + +#ifdef CONFIG_ATMEL_SPI + at91_spi0_hw_init(1 << 0); +#endif + +#ifdef CONFIG_LCD + at91_lcd_hw_init(); +#endif + + return 0; +} + +int dram_init(void) +{ + gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, + CONFIG_SYS_SDRAM_SIZE); + return 0; +} diff --git a/board/atmel/sama5d3xek/Makefile b/board/atmel/sama5d3xek/Makefile new file mode 100644 index 0000000..45d24d2 --- /dev/null +++ b/board/atmel/sama5d3xek/Makefile @@ -0,0 +1,51 @@ +# +# (C) Copyright 2003-2008 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2008 +# Stelian Pop <stelian@popies.net> +# Lead Tech Design <www.leadtechdesign.com> +# +# (C) Copyright 2013 +# Bo Shen <voice.shen@atmel.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS-y += sama5d3xek.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS) $(SOBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/atmel/sama5d3xek/sama5d3xek.c b/board/atmel/sama5d3xek/sama5d3xek.c new file mode 100644 index 0000000..541296d --- /dev/null +++ b/board/atmel/sama5d3xek/sama5d3xek.c @@ -0,0 +1,275 @@ +/* + * Copyright (C) 2012 - 2013 Atmel Corporation + * Bo Shen <voice.shen@atmel.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <mmc.h> +#include <asm/io.h> +#include <asm/arch/sama5d3_smc.h> +#include <asm/arch/at91_common.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/at91_rstc.h> +#include <asm/arch/gpio.h> +#include <asm/arch/clk.h> +#include <lcd.h> +#include <atmel_lcdc.h> +#include <atmel_mci.h> +#include <net.h> +#include <netdev.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* ------------------------------------------------------------------------- */ +/* + * Miscelaneous platform dependent initialisations + */ + +#ifdef CONFIG_NAND_ATMEL +void sama5d3xek_nand_hw_init(void) +{ + struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC; + + at91_periph_clk_enable(ATMEL_ID_SMC); + + /* Configure SMC CS3 for NAND/SmartMedia */ + writel(AT91_SMC_SETUP_NWE(2) | AT91_SMC_SETUP_NCS_WR(1) | + AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(1), + &smc->cs[3].setup); + writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(5) | + AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(5), + &smc->cs[3].pulse); + writel(AT91_SMC_CYCLE_NWE(8) | AT91_SMC_CYCLE_NRD(8), + &smc->cs[3].cycle); + writel(AT91_SMC_TIMINGS_TCLR(3) | AT91_SMC_TIMINGS_TADL(10) | + AT91_SMC_TIMINGS_TAR(3) | AT91_SMC_TIMINGS_TRR(4) | + AT91_SMC_TIMINGS_TWB(5) | AT91_SMC_TIMINGS_RBNSEL(3)| + AT91_SMC_TIMINGS_NFSEL(1), &smc->cs[3].timings); + writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | + AT91_SMC_MODE_EXNW_DISABLE | +#ifdef CONFIG_SYS_NAND_DBW_16 + AT91_SMC_MODE_DBW_16 | +#else /* CONFIG_SYS_NAND_DBW_8 */ + AT91_SMC_MODE_DBW_8 | +#endif + AT91_SMC_MODE_TDF_CYCLE(3), + &smc->cs[3].mode); +} +#endif + +#ifdef CONFIG_CMD_USB +static void sama5d3xek_usb_hw_init(void) +{ + at91_set_pio_output(AT91_PIO_PORTD, 25, 0); + at91_set_pio_output(AT91_PIO_PORTD, 26, 0); + at91_set_pio_output(AT91_PIO_PORTD, 27, 0); +} +#endif + +#ifdef CONFIG_GENERIC_ATMEL_MCI +static void sama5d3xek_mci_hw_init(void) +{ + at91_mci_hw_init(); + + at91_set_pio_output(AT91_PIO_PORTB, 10, 0); /* MCI0 Power */ +} +#endif + +#ifdef CONFIG_LCD +vidinfo_t panel_info = { + .vl_col = 800, + .vl_row = 480, + .vl_clk = 24000000, + .vl_sync = ATMEL_LCDC_INVLINE_NORMAL | ATMEL_LCDC_INVFRAME_NORMAL, + .vl_bpix = LCD_BPP, + .vl_tft = 1, + .vl_hsync_len = 128, + .vl_left_margin = 64, + .vl_right_margin = 64, + .vl_vsync_len = 2, + .vl_upper_margin = 22, + .vl_lower_margin = 21, + .mmio = ATMEL_BASE_LCDC, +}; + +void lcd_enable(void) +{ +} + +void lcd_disable(void) +{ +} + +static void sama5d3xek_lcd_hw_init(void) +{ + gd->fb_base = CONFIG_SAMA5D3_LCD_BASE; + + /* The higher 8 bit of LCD is board related */ + at91_set_c_periph(AT91_PIO_PORTC, 14, 0); /* LCDD16 */ + at91_set_c_periph(AT91_PIO_PORTC, 13, 0); /* LCDD17 */ + at91_set_c_periph(AT91_PIO_PORTC, 12, 0); /* LCDD18 */ + at91_set_c_periph(AT91_PIO_PORTC, 11, 0); /* LCDD19 */ + at91_set_c_periph(AT91_PIO_PORTC, 10, 0); /* LCDD20 */ + at91_set_c_periph(AT91_PIO_PORTC, 15, 0); /* LCDD21 */ + at91_set_c_periph(AT91_PIO_PORTE, 27, 0); /* LCDD22 */ + at91_set_c_periph(AT91_PIO_PORTE, 28, 0); /* LCDD23 */ + + /* Configure lower 16 bit of LCD and enable clock */ + at91_lcd_hw_init(); +} + +#ifdef CONFIG_LCD_INFO +#include <nand.h> +#include <version.h> + +void lcd_show_board_info(void) +{ + ulong dram_size, nand_size; + int i; + char temp[32]; + + lcd_printf("%s\n", U_BOOT_VERSION); + lcd_printf("(C) 2013 ATMEL Corp\n"); + lcd_printf("at91@atmel.com\n"); + lcd_printf("%s CPU at %s MHz\n", get_cpu_name(), + strmhz(temp, get_cpu_clk_rate())); + + dram_size = 0; + for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) + dram_size += gd->bd->bi_dram[i].size; + + nand_size = 0; +#ifdef CONFIG_NAND_ATMEL + for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) + nand_size += nand_info[i].size; +#endif + lcd_printf("%ld MB SDRAM, %ld MB NAND\n", + dram_size >> 20, nand_size >> 20); +} +#endif /* CONFIG_LCD_INFO */ +#endif /* CONFIG_LCD */ + +int board_early_init_f(void) +{ + at91_seriald_hw_init(); + + return 0; +} + +int board_init(void) +{ + /* adress of boot parameters */ + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; + +#ifdef CONFIG_NAND_ATMEL + sama5d3xek_nand_hw_init(); +#endif +#ifdef CONFIG_CMD_USB + sama5d3xek_usb_hw_init(); +#endif +#ifdef CONFIG_GENERIC_ATMEL_MCI + sama5d3xek_mci_hw_init(); +#endif +#ifdef CONFIG_ATMEL_SPI + at91_spi0_hw_init(1 << 0); +#endif +#ifdef CONFIG_MACB + if (has_emac()) + at91_macb_hw_init(); +#endif +#ifdef CONFIG_LCD + if (has_lcdc()) + sama5d3xek_lcd_hw_init(); +#endif + return 0; +} + +int dram_init(void) +{ + gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, + CONFIG_SYS_SDRAM_SIZE); + return 0; +} + +int board_eth_init(bd_t *bis) +{ + int rc = 0; + +#ifdef CONFIG_MACB + if (has_emac()) + rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC, 0x00); +#endif + + return rc; +} + +#ifdef CONFIG_GENERIC_ATMEL_MCI +int board_mmc_init(bd_t *bis) +{ + int rc = 0; + + rc = atmel_mci_init((void *)ATMEL_BASE_MCI0); + + return rc; +} +#endif + +/* SPI chip select control */ +#ifdef CONFIG_ATMEL_SPI +#include <spi.h> + +int spi_cs_is_valid(unsigned int bus, unsigned int cs) +{ + return bus == 0 && cs < 4; +} + +void spi_cs_activate(struct spi_slave *slave) +{ + switch (slave->cs) { + case 0: + at91_set_pio_output(AT91_PIO_PORTD, 13, 0); + case 1: + at91_set_pio_output(AT91_PIO_PORTD, 14, 0); + case 2: + at91_set_pio_output(AT91_PIO_PORTD, 15, 0); + case 3: + at91_set_pio_output(AT91_PIO_PORTD, 16, 0); + default: + break; + } +} + +void spi_cs_deactivate(struct spi_slave *slave) +{ + switch (slave->cs) { + case 0: + at91_set_pio_output(AT91_PIO_PORTD, 13, 1); + case 1: + at91_set_pio_output(AT91_PIO_PORTD, 14, 1); + case 2: + at91_set_pio_output(AT91_PIO_PORTD, 15, 1); + case 3: + at91_set_pio_output(AT91_PIO_PORTD, 16, 1); + default: + break; + } +} +#endif /* CONFIG_ATMEL_SPI */ diff --git a/board/boundary/nitrogen6x/clocks.cfg b/board/boundary/nitrogen6x/clocks.cfg index e7d1f86..0a3b47b 100644 --- a/board/boundary/nitrogen6x/clocks.cfg +++ b/board/boundary/nitrogen6x/clocks.cfg @@ -44,3 +44,14 @@ DATA 4, MX6_IOMUXC_GPR4, 0xF00000CF /* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ DATA 4, MX6_IOMUXC_GPR6, 0x007F007F DATA 4, MX6_IOMUXC_GPR7, 0x007F007F + +/* + * Setup CCM_CCOSR register as follows: + * + * cko1_en = 1 --> CKO1 enabled + * cko1_div = 111 --> divide by 8 + * cko1_sel = 1011 --> ahb_clk_root + * + * This sets CKO1 at ahb_clk_root/8 = 132/8 = 16.5 MHz + */ +DATA 4, CCM_CCOSR, 0x000000fb diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index cc071d6..e155556 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -47,40 +47,34 @@ DECLARE_GLOBAL_DATA_PTR; -#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ - PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) +#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ + PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \ + PAD_CTL_SRE_FAST | PAD_CTL_HYS) -#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \ - PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) +#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \ + PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \ + PAD_CTL_SRE_FAST | PAD_CTL_HYS) -#define ENET_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ - PAD_CTL_DSE_40ohm | PAD_CTL_HYS) +#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ + PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS) -#define SPI_PAD_CTRL (PAD_CTL_HYS | \ - PAD_CTL_PUS_100K_DOWN | PAD_CTL_SPEED_MED | \ +#define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \ PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST) -#define BUTTON_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ - PAD_CTL_DSE_40ohm | PAD_CTL_HYS) +#define BUTTON_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ + PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS) -#define I2C_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ - PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ +#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ + PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ PAD_CTL_ODE | PAD_CTL_SRE_FAST) -#define WEAK_PULLUP (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ - PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ +#define WEAK_PULLUP (PAD_CTL_PUS_100K_UP | \ + PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ PAD_CTL_SRE_SLOW) -#define WEAK_PULLDOWN (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_100K_DOWN | PAD_CTL_SPEED_MED | \ - PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ - PAD_CTL_SRE_SLOW) +#define WEAK_PULLDOWN (PAD_CTL_PUS_100K_DOWN | \ + PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \ + PAD_CTL_HYS | PAD_CTL_SRE_SLOW) #define OUTPUT_40OHM (PAD_CTL_SPEED_MED|PAD_CTL_DSE_40ohm) diff --git a/board/cm_t35/Makefile b/board/compulab/cm_t35/Makefile index bde56e6..31d9bbb 100644 --- a/board/cm_t35/Makefile +++ b/board/compulab/cm_t35/Makefile @@ -1,6 +1,8 @@ # -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# (C) Copyright 2011 - 2013 CompuLab, Ltd. <www.compulab.co.il> +# +# Authors: Nikita Kiryanov <nikita@compulab.co.il> +# Igor Grinberg <grinberg@compulab.co.il> # # See file CREDITS for list of people who contributed to this # project. @@ -17,9 +19,7 @@ # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# +# Foundation, Inc. include $(TOPDIR)/config.mk @@ -42,3 +42,5 @@ $(LIB): $(obj).depend $(OBJS) include $(SRCTREE)/rules.mk sinclude $(obj).depend + +######################################################################### diff --git a/board/cm_t35/cm_t35.c b/board/compulab/cm_t35/cm_t35.c index 84c36ba..b0b80e5 100644 --- a/board/cm_t35/cm_t35.c +++ b/board/compulab/cm_t35/cm_t35.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2011 CompuLab, Ltd. <www.compulab.co.il> + * (C) Copyright 2011 - 2013 CompuLab, Ltd. <www.compulab.co.il> * * Authors: Mike Rapoport <mike@compulab.co.il> * Igor Grinberg <grinberg@compulab.co.il> @@ -448,7 +448,7 @@ int board_mmc_getcd(struct mmc *mmc) { u8 val; - if (twl4030_i2c_read_u8(TWL4030_CHIP_GPIO, &val, TWL4030_BASEADD_GPIO)) + if (twl4030_i2c_read_u8(TWL4030_CHIP_GPIO, TWL4030_BASEADD_GPIO, &val)) return -1; return !(val & 1); @@ -493,17 +493,17 @@ static void setup_net_chip_gmpc(void) static void reset_net_chip(void) { /* Set GPIO1 of TPS65930 as output */ - twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02, - TWL4030_BASEADD_GPIO + 0x03); + twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, TWL4030_BASEADD_GPIO + 0x03, + 0x02); /* Send a pulse on the GPIO pin */ - twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02, - TWL4030_BASEADD_GPIO + 0x0C); + twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, TWL4030_BASEADD_GPIO + 0x0C, + 0x02); udelay(1); - twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02, - TWL4030_BASEADD_GPIO + 0x09); + twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, TWL4030_BASEADD_GPIO + 0x09, + 0x02); mdelay(40); - twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02, - TWL4030_BASEADD_GPIO + 0x0C); + twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, TWL4030_BASEADD_GPIO + 0x0C, + 0x02); mdelay(1); } #else @@ -597,13 +597,13 @@ int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor) udelay(1000); offset = TWL4030_BASEADD_GPIO + TWL4030_GPIO_GPIODATADIR1; - twl4030_i2c_read_u8(TWL4030_CHIP_GPIO, &val, offset); + twl4030_i2c_read_u8(TWL4030_CHIP_GPIO, offset, &val); /* Set GPIO6 and GPIO7 of TPS65930 as output */ val |= 0xC0; - twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, val, offset); + twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, offset, val); offset = TWL4030_BASEADD_GPIO + TWL4030_GPIO_SETGPIODATAOUT1; /* Take both PHYs out of reset */ - twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0xC0, offset); + twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, offset, 0xC0); udelay(1); return omap_ehci_hcd_init(&usbhs_bdata, hccr, hcor); diff --git a/board/cm_t35/display.c b/board/compulab/cm_t35/display.c index a004ea1..adc4853 100644 --- a/board/cm_t35/display.c +++ b/board/compulab/cm_t35/display.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2012 CompuLab, Ltd. <www.compulab.co.il> + * (C) Copyright 2012 - 2013 CompuLab, Ltd. <www.compulab.co.il> * * Authors: Nikita Kiryanov <nikita@compulab.co.il> * diff --git a/board/cm_t35/eeprom.c b/board/compulab/cm_t35/eeprom.c index b0af103..b0af103 100644 --- a/board/cm_t35/eeprom.c +++ b/board/compulab/cm_t35/eeprom.c diff --git a/board/cm_t35/eeprom.h b/board/compulab/cm_t35/eeprom.h index 38824d1..38824d1 100644 --- a/board/cm_t35/eeprom.h +++ b/board/compulab/cm_t35/eeprom.h diff --git a/board/cm_t35/leds.c b/board/compulab/cm_t35/leds.c index 48ad598..dcae135 100644 --- a/board/cm_t35/leds.c +++ b/board/compulab/cm_t35/leds.c @@ -1,6 +1,5 @@ /* - * (C) Copyright 2011 - * CompuLab, Ltd. <www.compulab.co.il> + * (C) Copyright 2011 - 2013 CompuLab, Ltd. <www.compulab.co.il> * * Author: Igor Grinberg <grinberg@compulab.co.il> * diff --git a/board/denx/m53evk/Makefile b/board/denx/m53evk/Makefile new file mode 100644 index 0000000..bfb040a --- /dev/null +++ b/board/denx/m53evk/Makefile @@ -0,0 +1,40 @@ +# +# DENX M53EVK +# Copyright (C) 2012-2013 Marek Vasut <marex@denx.de> +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS := m53evk.o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/denx/m53evk/imximage.cfg b/board/denx/m53evk/imximage.cfg new file mode 100644 index 0000000..27c593a --- /dev/null +++ b/board/denx/m53evk/imximage.cfg @@ -0,0 +1,108 @@ +/* + * DENX M53 DRAM init values + * Copyright (C) 2012-2013 Marek Vasut <marex@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ +#include <asm/imx-common/imximage.cfg> + +/* image version */ +IMAGE_VERSION 2 + + +/* Boot Offset 0x400, valid for both SD and NAND boot. */ +BOOT_OFFSET FLASH_OFFSET_STANDARD + +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ +DATA 4 0x53fa86f4 0x00000000 /* GRP_DDRMODE_CTL */ +DATA 4 0x53fa8714 0x00000000 /* GRP_DDRMODE */ +DATA 4 0x53fa86fc 0x00000000 /* GRP_DDRPKE */ +DATA 4 0x53fa8724 0x04000000 /* GRP_DDR_TYPE */ + +DATA 4 0x53fa872c 0x00300000 /* GRP_B3DS */ +DATA 4 0x53fa8554 0x00300000 /* DRAM_DQM3 */ +DATA 4 0x53fa8558 0x00300040 /* DRAM_SDQS3 */ + +DATA 4 0x53fa8728 0x00300000 /* GRP_B2DS */ +DATA 4 0x53fa8560 0x00300000 /* DRAM_DQM2 */ +DATA 4 0x53fa8568 0x00300040 /* DRAM_SDQS2 */ + +DATA 4 0x53fa871c 0x00300000 /* GRP_B1DS */ +DATA 4 0x53fa8594 0x00300000 /* DRAM_DQM1 */ +DATA 4 0x53fa8590 0x00300040 /* DRAM_SDQS1 */ + +DATA 4 0x53fa8718 0x00300000 /* GRP_B0DS */ +DATA 4 0x53fa8584 0x00300000 /* DRAM_DQM0 */ +DATA 4 0x53fa857c 0x00300040 /* DRAM_SDQS0 */ + +DATA 4 0x53fa8578 0x00300000 /* DRAM_SDCLK_0 */ +DATA 4 0x53fa8570 0x00300000 /* DRAM_SDCLK_1 */ + +DATA 4 0x53fa8574 0x00300000 /* DRAM_CAS */ +DATA 4 0x53fa8588 0x00300000 /* DRAM_RAS */ +DATA 4 0x53fa86f0 0x00300000 /* GRP_ADDDS */ +DATA 4 0x53fa8720 0x00300000 /* GRP_CTLDS */ + +DATA 4 0x53fa8564 0x00300040 /* DRAM_SDODT1 */ +DATA 4 0x53fa8580 0x00300040 /* DRAM_SDODT0 */ + +/* ESDCTL */ +DATA 4 0x63fd9088 0x32383535 +DATA 4 0x63fd9090 0x40383538 +DATA 4 0x63fd907c 0x0136014d +DATA 4 0x63fd9080 0x01510141 + +DATA 4 0x63fd9018 0x00011740 +DATA 4 0x63fd9000 0xc3190000 +DATA 4 0x63fd900c 0x555952e3 +DATA 4 0x63fd9010 0xb68e8b63 +DATA 4 0x63fd9014 0x01ff00db +DATA 4 0x63fd902c 0x000026d2 +DATA 4 0x63fd9030 0x009f0e21 +DATA 4 0x63fd9008 0x12273030 +DATA 4 0x63fd9004 0x0002002d +DATA 4 0x63fd901c 0x00008032 +DATA 4 0x63fd901c 0x00008033 +DATA 4 0x63fd901c 0x00028031 +DATA 4 0x63fd901c 0x092080b0 +DATA 4 0x63fd901c 0x04008040 +DATA 4 0x63fd901c 0x0000803a +DATA 4 0x63fd901c 0x0000803b +DATA 4 0x63fd901c 0x00028039 +DATA 4 0x63fd901c 0x09208138 +DATA 4 0x63fd901c 0x04008048 +DATA 4 0x63fd9020 0x00001800 +DATA 4 0x63fd9040 0x04b80003 +DATA 4 0x63fd9058 0x00022227 +DATA 4 0x63fd901c 0x00000000 diff --git a/board/denx/m53evk/m53evk.c b/board/denx/m53evk/m53evk.c new file mode 100644 index 0000000..12917fd --- /dev/null +++ b/board/denx/m53evk/m53evk.c @@ -0,0 +1,328 @@ +/* + * DENX M53 module + * + * Copyright (C) 2012-2013 Marek Vasut <marex@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/crm_regs.h> +#include <asm/arch/clock.h> +#include <asm/arch/iomux-mx53.h> +#include <asm/arch/spl.h> +#include <asm/errno.h> +#include <netdev.h> +#include <i2c.h> +#include <mmc.h> +#include <spl.h> +#include <fsl_esdhc.h> +#include <asm/gpio.h> +#include <usb/ehci-fsl.h> + +DECLARE_GLOBAL_DATA_PTR; + +int dram_init(void) +{ + u32 size1, size2; + + size1 = get_ram_size((void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); + size2 = get_ram_size((void *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE); + + gd->ram_size = size1 + size2; + + return 0; +} +void dram_init_banksize(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + + gd->bd->bi_dram[1].start = PHYS_SDRAM_2; + gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; +} + +static void setup_iomux_uart(void) +{ + static const iomux_v3_cfg_t uart_pads[] = { + MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX, + MX53_PAD_PATA_DMARQ__UART2_TXD_MUX, + }; + + imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads)); +} + +#ifdef CONFIG_USB_EHCI_MX5 +int board_ehci_hcd_init(int port) +{ + if (port == 0) { + /* USB OTG PWRON */ + imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX53_PAD_GPIO_4__GPIO1_4, + PAD_CTL_PKE | PAD_CTL_DSE_HIGH)); + gpio_direction_output(IMX_GPIO_NR(1, 4), 0); + + /* USB OTG Over Current */ + imx_iomux_v3_setup_pad(MX53_PAD_GPIO_18__GPIO7_13); + } else if (port == 1) { + /* USB Host PWRON */ + imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX53_PAD_GPIO_2__GPIO1_2, + PAD_CTL_PKE | PAD_CTL_DSE_HIGH)); + gpio_direction_output(IMX_GPIO_NR(1, 2), 0); + + /* USB Host Over Current */ + imx_iomux_v3_setup_pad(MX53_PAD_GPIO_3__USBOH3_USBH1_OC); + } + + return 0; +} +#endif + +static void setup_iomux_fec(void) +{ + static const iomux_v3_cfg_t fec_pads[] = { + /* MDIO pads */ + NEW_PAD_CTRL(MX53_PAD_FEC_MDIO__FEC_MDIO, PAD_CTL_HYS | + PAD_CTL_DSE_HIGH | PAD_CTL_PUS_22K_UP | PAD_CTL_ODE), + NEW_PAD_CTRL(MX53_PAD_FEC_MDC__FEC_MDC, PAD_CTL_DSE_HIGH), + + /* FEC 0 pads */ + NEW_PAD_CTRL(MX53_PAD_FEC_CRS_DV__FEC_RX_DV, + PAD_CTL_HYS | PAD_CTL_PKE), + NEW_PAD_CTRL(MX53_PAD_FEC_REF_CLK__FEC_TX_CLK, + PAD_CTL_HYS | PAD_CTL_PKE), + NEW_PAD_CTRL(MX53_PAD_FEC_RX_ER__FEC_RX_ER, + PAD_CTL_HYS | PAD_CTL_PKE), + NEW_PAD_CTRL(MX53_PAD_FEC_TX_EN__FEC_TX_EN, PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_FEC_RXD0__FEC_RDATA_0, + PAD_CTL_HYS | PAD_CTL_PKE), + NEW_PAD_CTRL(MX53_PAD_FEC_RXD1__FEC_RDATA_1, + PAD_CTL_HYS | PAD_CTL_PKE), + NEW_PAD_CTRL(MX53_PAD_FEC_TXD0__FEC_TDATA_0, PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_FEC_TXD1__FEC_TDATA_1, PAD_CTL_DSE_HIGH), + + /* FEC 1 pads */ + NEW_PAD_CTRL(MX53_PAD_KEY_COL0__FEC_RDATA_3, + PAD_CTL_HYS | PAD_CTL_PKE), + NEW_PAD_CTRL(MX53_PAD_KEY_ROW0__FEC_TX_ER, + PAD_CTL_HYS | PAD_CTL_PKE), + NEW_PAD_CTRL(MX53_PAD_KEY_COL1__FEC_RX_CLK, + PAD_CTL_HYS | PAD_CTL_PKE), + NEW_PAD_CTRL(MX53_PAD_KEY_ROW1__FEC_COL, + PAD_CTL_HYS | PAD_CTL_PKE), + NEW_PAD_CTRL(MX53_PAD_KEY_COL2__FEC_RDATA_2, + PAD_CTL_HYS | PAD_CTL_PKE), + NEW_PAD_CTRL(MX53_PAD_KEY_ROW2__FEC_TDATA_2, PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_KEY_COL3__FEC_CRS, + PAD_CTL_HYS | PAD_CTL_PKE), + NEW_PAD_CTRL(MX53_PAD_GPIO_19__FEC_TDATA_3, PAD_CTL_DSE_HIGH), + }; + + imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads)); +} + +#ifdef CONFIG_FSL_ESDHC +struct fsl_esdhc_cfg esdhc_cfg = { + MMC_SDHC1_BASE_ADDR, +}; + +int board_mmc_getcd(struct mmc *mmc) +{ + imx_iomux_v3_setup_pad(MX53_PAD_GPIO_1__GPIO1_1); + gpio_direction_input(IMX_GPIO_NR(1, 1)); + + return !gpio_get_value(IMX_GPIO_NR(1, 1)); +} + +#define SD_CMD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \ + PAD_CTL_PUS_100K_UP) +#define SD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | \ + PAD_CTL_DSE_HIGH) + +int board_mmc_init(bd_t *bis) +{ + static const iomux_v3_cfg_t sd1_pads[] = { + NEW_PAD_CTRL(MX53_PAD_SD1_CMD__ESDHC1_CMD, SD_CMD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_SD1_CLK__ESDHC1_CLK, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_SD1_DATA0__ESDHC1_DAT0, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_SD1_DATA1__ESDHC1_DAT1, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_SD1_DATA2__ESDHC1_DAT2, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_SD1_DATA3__ESDHC1_DAT3, SD_PAD_CTRL), + MX53_PAD_EIM_DA13__GPIO3_13, + + MX53_PAD_EIM_EB3__GPIO2_31, /* SD power */ + }; + + esdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); + + imx_iomux_v3_setup_multiple_pads(sd1_pads, ARRAY_SIZE(sd1_pads)); + + /* GPIO 2_31 is SD power */ + gpio_direction_output(IMX_GPIO_NR(2, 31), 0); + + return fsl_esdhc_initialize(bis, &esdhc_cfg); +} +#endif + +#define I2C_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_ODE) + +static void setup_iomux_i2c(void) +{ + static const iomux_v3_cfg_t i2c_pads[] = { + NEW_PAD_CTRL(MX53_PAD_EIM_D16__I2C2_SDA, I2C_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_EIM_EB2__I2C2_SCL, I2C_PAD_CTRL), + }; + + imx_iomux_v3_setup_multiple_pads(i2c_pads, ARRAY_SIZE(i2c_pads)); +} + +static void setup_iomux_nand(void) +{ + static const iomux_v3_cfg_t nand_pads[] = { + NEW_PAD_CTRL(MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B, + PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B, + PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_NANDF_CLE__EMI_NANDF_CLE, + PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_NANDF_ALE__EMI_NANDF_ALE, + PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B, + PAD_CTL_PUS_100K_UP), + NEW_PAD_CTRL(MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0, + PAD_CTL_PUS_100K_UP), + NEW_PAD_CTRL(MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0, + PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_PATA_DATA0__EMI_NANDF_D_0, + PAD_CTL_DSE_HIGH | PAD_CTL_PKE), + NEW_PAD_CTRL(MX53_PAD_PATA_DATA1__EMI_NANDF_D_1, + PAD_CTL_DSE_HIGH | PAD_CTL_PKE), + NEW_PAD_CTRL(MX53_PAD_PATA_DATA2__EMI_NANDF_D_2, + PAD_CTL_DSE_HIGH | PAD_CTL_PKE), + NEW_PAD_CTRL(MX53_PAD_PATA_DATA3__EMI_NANDF_D_3, + PAD_CTL_DSE_HIGH | PAD_CTL_PKE), + NEW_PAD_CTRL(MX53_PAD_PATA_DATA4__EMI_NANDF_D_4, + PAD_CTL_DSE_HIGH | PAD_CTL_PKE), + NEW_PAD_CTRL(MX53_PAD_PATA_DATA5__EMI_NANDF_D_5, + PAD_CTL_DSE_HIGH | PAD_CTL_PKE), + NEW_PAD_CTRL(MX53_PAD_PATA_DATA6__EMI_NANDF_D_6, + PAD_CTL_DSE_HIGH | PAD_CTL_PKE), + NEW_PAD_CTRL(MX53_PAD_PATA_DATA7__EMI_NANDF_D_7, + PAD_CTL_DSE_HIGH | PAD_CTL_PKE), + }; + + imx_iomux_v3_setup_multiple_pads(nand_pads, ARRAY_SIZE(nand_pads)); +} + +static void m53_set_clock(void) +{ + int ret; + const uint32_t ref_clk = MXC_HCLK; + const uint32_t dramclk = 400; + uint32_t cpuclk; + + imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX53_PAD_GPIO_10__GPIO4_0, + PAD_CTL_DSE_HIGH | PAD_CTL_PKE)); + gpio_direction_input(IMX_GPIO_NR(4, 0)); + + /* GPIO10 selects modules' CPU speed, 1 = 1200MHz ; 0 = 800MHz */ + cpuclk = gpio_get_value(IMX_GPIO_NR(4, 0)) ? 1200 : 800; + + ret = mxc_set_clock(ref_clk, cpuclk, MXC_ARM_CLK); + if (ret) + printf("CPU: Switch CPU clock to %dMHz failed\n", cpuclk); + + ret = mxc_set_clock(ref_clk, dramclk, MXC_PERIPH_CLK); + if (ret) { + printf("CPU: Switch peripheral clock to %dMHz failed\n", + dramclk); + } + + ret = mxc_set_clock(ref_clk, dramclk, MXC_DDR_CLK); + if (ret) + printf("CPU: Switch DDR clock to %dMHz failed\n", dramclk); +} + +static void m53_set_nand(void) +{ + u32 i; + + /* NAND flash is muxed on ATA pins */ + setbits_le32(M4IF_BASE_ADDR + 0xc, M4IF_GENP_WEIM_MM_MASK); + + /* Wait for Grant/Ack sequence (see EIM_CSnGCR2:MUX16_BYP_GRANT) */ + for (i = 0x4; i < 0x94; i += 0x18) { + clrbits_le32(WEIM_BASE_ADDR + i, + WEIM_GCR2_MUX16_BYP_GRANT_MASK); + } + + mxc_set_clock(0, 33, MXC_NFC_CLK); + enable_nfc_clk(1); +} + +int board_early_init_f(void) +{ + setup_iomux_uart(); + setup_iomux_fec(); + setup_iomux_i2c(); + setup_iomux_nand(); + + m53_set_clock(); + + mxc_set_sata_internal_clock(); + + /* NAND clock @ 33MHz */ + m53_set_nand(); + + return 0; +} + +int board_init(void) +{ + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; + + return 0; +} + +int checkboard(void) +{ + puts("Board: DENX M53EVK\n"); + + return 0; +} + +/* + * NAND SPL + */ +#ifdef CONFIG_SPL_BUILD +void spl_board_init(void) +{ + setup_iomux_nand(); + m53_set_clock(); + m53_set_nand(); +} + +u32 spl_boot_device(void) +{ + return BOOT_DEVICE_NAND; +} +#endif diff --git a/board/esg/ima3-mx53/ima3-mx53.c b/board/esg/ima3-mx53/ima3-mx53.c index 41d6bb6..051fa6e 100644 --- a/board/esg/ima3-mx53/ima3-mx53.c +++ b/board/esg/ima3-mx53/ima3-mx53.c @@ -23,11 +23,10 @@ #include <common.h> #include <asm/io.h> #include <asm/arch/imx-regs.h> -#include <asm/arch/mx5x_pins.h> #include <asm/arch/sys_proto.h> #include <asm/arch/crm_regs.h> #include <asm/arch/clock.h> -#include <asm/arch/iomux.h> +#include <asm/arch/iomux-mx53.h> #include <asm/errno.h> #include <netdev.h> #include <mmc.h> @@ -66,109 +65,53 @@ int dram_init(void) return 0; } +#define UART_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_ODE) + static void setup_iomux_uart(void) { - /* UART4 RXD */ - mxc_request_iomux(MX53_PIN_CSI0_D13, IOMUX_CONFIG_ALT2); - mxc_iomux_set_pad(MX53_PIN_CSI0_D13, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | - PAD_CTL_100K_PU | PAD_CTL_ODE_OPENDRAIN_ENABLE); - mxc_iomux_set_input(MX53_UART4_IPP_UART_RXD_MUX_SELECT_INPUT, 0x3); - - /* UART4 TXD */ - mxc_request_iomux(MX53_PIN_CSI0_D12, IOMUX_CONFIG_ALT2); - mxc_iomux_set_pad(MX53_PIN_CSI0_D12, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | - PAD_CTL_100K_PU | PAD_CTL_ODE_OPENDRAIN_ENABLE); + static const iomux_v3_cfg_t uart_pads[] = { + NEW_PAD_CTRL(MX53_PAD_CSI0_DAT13__UART4_RXD_MUX, UART_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_CSI0_DAT12__UART4_TXD_MUX, UART_PAD_CTRL), + }; + + imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads)); } static void setup_iomux_fec(void) { - /*FEC_MDIO*/ - mxc_request_iomux(MX53_PIN_FEC_MDIO, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_MDIO, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | PAD_CTL_22K_PU | - PAD_CTL_ODE_OPENDRAIN_ENABLE); - mxc_iomux_set_input(MX53_FEC_FEC_MDI_SELECT_INPUT, 0x1); - - /*FEC_MDC*/ - mxc_request_iomux(MX53_PIN_FEC_MDC, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_MDC, PAD_CTL_DRV_HIGH); - - /* FEC RXD3 */ - mxc_request_iomux(MX53_PIN_KEY_COL0, IOMUX_CONFIG_ALT6); - mxc_iomux_set_pad(MX53_PIN_KEY_COL0, PAD_CTL_HYS_ENABLE | - PAD_CTL_PKE_ENABLE); - - /* FEC RXD2 */ - mxc_request_iomux(MX53_PIN_KEY_COL2, IOMUX_CONFIG_ALT6); - mxc_iomux_set_pad(MX53_PIN_KEY_COL2, PAD_CTL_HYS_ENABLE | - PAD_CTL_PKE_ENABLE); - - /* FEC RXD1 */ - mxc_request_iomux(MX53_PIN_FEC_RXD1, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_RXD1, PAD_CTL_HYS_ENABLE | - PAD_CTL_PKE_ENABLE); - - /* FEC RXD0 */ - mxc_request_iomux(MX53_PIN_FEC_RXD0, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_RXD0, PAD_CTL_HYS_ENABLE | - PAD_CTL_PKE_ENABLE); - - /* FEC TXD3 */ - mxc_request_iomux(MX53_PIN_GPIO_19, IOMUX_CONFIG_ALT6); - mxc_iomux_set_pad(MX53_PIN_GPIO_19, PAD_CTL_DRV_HIGH); - - /* FEC TXD2 */ - mxc_request_iomux(MX53_PIN_KEY_ROW2, IOMUX_CONFIG_ALT6); - mxc_iomux_set_pad(MX53_PIN_KEY_ROW2, PAD_CTL_DRV_HIGH); - - /* FEC TXD1 */ - mxc_request_iomux(MX53_PIN_FEC_TXD1, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_TXD1, PAD_CTL_DRV_HIGH); - - /* FEC TXD0 */ - mxc_request_iomux(MX53_PIN_FEC_TXD0, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_TXD0, PAD_CTL_DRV_HIGH); - - /* FEC TX_EN */ - mxc_request_iomux(MX53_PIN_FEC_TX_EN, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_TX_EN, PAD_CTL_DRV_HIGH); - - /* FEC TX_CLK */ - mxc_request_iomux(MX53_PIN_FEC_REF_CLK, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_REF_CLK, PAD_CTL_HYS_ENABLE | - PAD_CTL_PKE_ENABLE); - - /* FEC RX_ER */ - mxc_request_iomux(MX53_PIN_FEC_RX_ER, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_RX_ER, PAD_CTL_HYS_ENABLE | - PAD_CTL_PKE_ENABLE); - - /* FEC RX_DV */ - mxc_request_iomux(MX53_PIN_FEC_CRS_DV, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_CRS_DV, PAD_CTL_HYS_ENABLE | - PAD_CTL_PKE_ENABLE); - - /* FEC CRS */ - mxc_request_iomux(MX53_PIN_KEY_COL3, IOMUX_CONFIG_ALT6); - mxc_iomux_set_pad(MX53_PIN_KEY_COL3, PAD_CTL_HYS_ENABLE | - PAD_CTL_PKE_ENABLE); - - /* FEC COL */ - mxc_request_iomux(MX53_PIN_KEY_ROW1, IOMUX_CONFIG_ALT6); - mxc_iomux_set_pad(MX53_PIN_KEY_ROW1, PAD_CTL_HYS_ENABLE | - PAD_CTL_PKE_ENABLE); - mxc_iomux_set_input(MX53_FEC_FEC_COL_SELECT_INPUT, 0x0); - - /* FEC RX_CLK */ - mxc_request_iomux(MX53_PIN_KEY_COL1, IOMUX_CONFIG_ALT6); - mxc_iomux_set_pad(MX53_PIN_KEY_COL1, PAD_CTL_HYS_ENABLE | - PAD_CTL_PKE_ENABLE); - mxc_iomux_set_input(MX53_FEC_FEC_RX_CLK_SELECT_INPUT, 0x0); + static const iomux_v3_cfg_t fec_pads[] = { + NEW_PAD_CTRL(MX53_PAD_FEC_MDIO__FEC_MDIO, PAD_CTL_HYS | + PAD_CTL_DSE_HIGH | PAD_CTL_PUS_22K_UP | PAD_CTL_ODE), + NEW_PAD_CTRL(MX53_PAD_FEC_MDC__FEC_MDC, PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_KEY_COL0__FEC_RDATA_3, + PAD_CTL_HYS | PAD_CTL_PKE), + NEW_PAD_CTRL(MX53_PAD_KEY_COL2__FEC_RDATA_2, + PAD_CTL_HYS | PAD_CTL_PKE), + NEW_PAD_CTRL(MX53_PAD_FEC_RXD1__FEC_RDATA_1, + PAD_CTL_HYS | PAD_CTL_PKE), + NEW_PAD_CTRL(MX53_PAD_FEC_RXD0__FEC_RDATA_0, + PAD_CTL_HYS | PAD_CTL_PKE), + NEW_PAD_CTRL(MX53_PAD_GPIO_19__FEC_TDATA_3, PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_KEY_ROW2__FEC_TDATA_2, PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_FEC_TXD1__FEC_TDATA_1, PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_FEC_TXD0__FEC_TDATA_0, PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_FEC_TX_EN__FEC_TX_EN, PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_FEC_REF_CLK__FEC_TX_CLK, + PAD_CTL_HYS | PAD_CTL_PKE), + NEW_PAD_CTRL(MX53_PAD_FEC_RX_ER__FEC_RX_ER, + PAD_CTL_HYS | PAD_CTL_PKE), + NEW_PAD_CTRL(MX53_PAD_FEC_CRS_DV__FEC_RX_DV, + PAD_CTL_HYS | PAD_CTL_PKE), + NEW_PAD_CTRL(MX53_PAD_KEY_COL3__FEC_CRS, + PAD_CTL_HYS | PAD_CTL_PKE), + NEW_PAD_CTRL(MX53_PAD_KEY_ROW1__FEC_COL, + PAD_CTL_HYS | PAD_CTL_PKE), + NEW_PAD_CTRL(MX53_PAD_KEY_COL1__FEC_RX_CLK, + PAD_CTL_HYS | PAD_CTL_PKE), + }; + + imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads)); } #ifdef CONFIG_FSL_ESDHC @@ -178,76 +121,51 @@ int board_mmc_getcd(struct mmc *mmc) { int ret; - ret = !gpio_get_value(IOMUX_TO_GPIO(MX53_PIN_GPIO_1)); + ret = !gpio_get_value(IMX_GPIO_NR(1, 1)); return ret; } +#define SD_CMD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \ + PAD_CTL_PUS_100K_UP) +#define SD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | \ + PAD_CTL_DSE_HIGH) +#define SD_CD_PAD_CTRL (PAD_CTL_DSE_HIGH | PAD_CTL_HYS | PAD_CTL_PKE) + int board_mmc_init(bd_t *bis) { - mxc_request_iomux(MX53_PIN_SD1_CMD, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_SD1_CLK, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_SD1_DATA0, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_SD1_DATA1, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_SD1_DATA2, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_SD1_DATA3, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_GPIO_1, IOMUX_CONFIG_ALT1); - mxc_iomux_set_pad(MX53_PIN_GPIO_1, - PAD_CTL_DRV_HIGH | PAD_CTL_HYS_ENABLE | - PAD_CTL_PUE_KEEPER | PAD_CTL_100K_PU | - PAD_CTL_ODE_OPENDRAIN_NONE | PAD_CTL_PKE_ENABLE); - gpio_direction_input(IOMUX_TO_GPIO(MX53_PIN_GPIO_1)); - - mxc_iomux_set_pad(MX53_PIN_SD1_CMD, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL | - PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU); - mxc_iomux_set_pad(MX53_PIN_SD1_CLK, - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | - PAD_CTL_47K_PU | PAD_CTL_DRV_HIGH); - mxc_iomux_set_pad(MX53_PIN_SD1_DATA0, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL | - PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); - mxc_iomux_set_pad(MX53_PIN_SD1_DATA1, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL | - PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); - mxc_iomux_set_pad(MX53_PIN_SD1_DATA2, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL | - PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); - mxc_iomux_set_pad(MX53_PIN_SD1_DATA3, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL | - PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); + static const iomux_v3_cfg_t sd1_pads[] = { + NEW_PAD_CTRL(MX53_PAD_SD1_CMD__ESDHC1_CMD, SD_CMD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_SD1_CLK__ESDHC1_CLK, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_SD1_DATA0__ESDHC1_DAT0, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_SD1_DATA1__ESDHC1_DAT1, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_SD1_DATA2__ESDHC1_DAT2, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_SD1_DATA3__ESDHC1_DAT3, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_GPIO_1__GPIO1_1, SD_CD_PAD_CTRL), + }; + + imx_iomux_v3_setup_multiple_pads(sd1_pads, ARRAY_SIZE(sd1_pads)); + gpio_direction_input(IMX_GPIO_NR(1, 1)); esdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); return fsl_esdhc_initialize(bis, &esdhc_cfg); } #endif +#define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_47K_UP) + static void setup_iomux_spi(void) { - /* SCLK */ - mxc_request_iomux(MX53_PIN_CSI0_D8, IOMUX_CONFIG_ALT3); - mxc_iomux_set_pad(MX53_PIN_CSI0_D8, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL | - PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); - mxc_iomux_set_input(MX53_ECSPI2_IPP_CSPI_CLK_IN_SELECT_INPUT, 0x1); - /* MOSI */ - mxc_request_iomux(MX53_PIN_CSI0_D9, IOMUX_CONFIG_ALT3); - mxc_iomux_set_pad(MX53_PIN_CSI0_D9, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL | - PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); - mxc_iomux_set_input(MX53_ECSPI2_IPP_IND_MOSI_SELECT_INPUT, 0x1); - /* MISO */ - mxc_request_iomux(MX53_PIN_CSI0_D10, IOMUX_CONFIG_ALT3); - mxc_iomux_set_pad(MX53_PIN_CSI0_D10, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL | - PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); - mxc_iomux_set_input(MX53_ECSPI2_IPP_IND_MISO_SELECT_INPUT, 0x1); - /* SSEL 0 */ - mxc_request_iomux(MX53_PIN_CSI0_D11, IOMUX_CONFIG_GPIO); - mxc_iomux_set_pad(MX53_PIN_CSI0_D11, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL | - PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); - gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_CSI0_D11), 1); + static const iomux_v3_cfg_t spi_pads[] = { + NEW_PAD_CTRL(MX53_PAD_CSI0_DAT8__ECSPI2_SCLK, SPI_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_CSI0_DAT9__ECSPI2_MOSI, SPI_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_CSI0_DAT10__ECSPI2_MISO, SPI_PAD_CTRL), + /* SSEL 0 */ + NEW_PAD_CTRL(MX53_PAD_CSI0_DAT11__GPIO5_29, SPI_PAD_CTRL), + }; + + imx_iomux_v3_setup_multiple_pads(spi_pads, ARRAY_SIZE(spi_pads)); + gpio_direction_output(IMX_GPIO_NR(5, 29), 1); } int board_early_init_f(void) diff --git a/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg b/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg index d0f5815..bae5c23 100644 --- a/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg +++ b/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg @@ -172,3 +172,14 @@ DATA 4 0x020e0010 0xF00000CF /* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ DATA 4 0x020e0018 0x007F007F DATA 4 0x020e001c 0x007F007F + +/* + * Setup CCM_CCOSR register as follows: + * + * cko1_en = 1 --> CKO1 enabled + * cko1_div = 111 --> divide by 8 + * cko1_sel = 1011 --> ahb_clk_root + * + * This sets CKO1 at ahb_clk_root/8 = 132/8 = 16.5 MHz + */ +DATA 4 0x020c4060 0x000000fb diff --git a/board/freescale/mx23evk/spl_boot.c b/board/freescale/mx23evk/spl_boot.c index b6f4e7e..6be8c8d 100644 --- a/board/freescale/mx23evk/spl_boot.c +++ b/board/freescale/mx23evk/spl_boot.c @@ -25,8 +25,8 @@ #include <asm/arch/imx-regs.h> #include <asm/arch/sys_proto.h> -#define MUX_CONFIG_SSP1 (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP) -#define MUX_CONFIG_EMI (MXS_PAD_3V3 | MXS_PAD_16MA | MXS_PAD_PULLUP) +#define MUX_CONFIG_SSP1 (MXS_PAD_8MA | MXS_PAD_PULLUP) +#define MUX_CONFIG_EMI (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_PULLUP) const iomux_cfg_t iomux_setup[] = { /* DUART */ diff --git a/board/freescale/mx25pdk/mx25pdk.c b/board/freescale/mx25pdk/mx25pdk.c index d73e27e..5e6047f 100644 --- a/board/freescale/mx25pdk/mx25pdk.c +++ b/board/freescale/mx25pdk/mx25pdk.c @@ -21,8 +21,7 @@ #include <asm/io.h> #include <asm/gpio.h> #include <asm/arch/imx-regs.h> -#include <asm/arch/imx25-pinmux.h> -#include <asm/arch/sys_proto.h> +#include <asm/arch/iomux-mx25.h> #include <asm/arch/clock.h> #include <mmc.h> #include <fsl_esdhc.h> @@ -31,8 +30,8 @@ #include <fsl_pmic.h> #include <mc34704.h> -#define FEC_RESET_B IMX_GPIO_NR(2, 3) -#define FEC_ENABLE_B IMX_GPIO_NR(4, 8) +#define FEC_RESET_B IMX_GPIO_NR(4, 8) +#define FEC_ENABLE_B IMX_GPIO_NR(2, 3) #define CARD_DETECT IMX_GPIO_NR(2, 1) DECLARE_GLOBAL_DATA_PTR; @@ -43,29 +42,42 @@ struct fsl_esdhc_cfg esdhc_cfg[1] = { }; #endif +/* + * FIXME: need to revisit this + * The original code enabled PUE and 100-k pull-down without PKE, so the right + * value here is likely: + * 0 for no pull + * or: + * PAD_CTL_PUS_100K_DOWN for 100-k pull-down + */ +#define FEC_OUT_PAD_CTRL 0 + +#define I2C_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP | \ + PAD_CTL_ODE) + static void mx25pdk_fec_init(void) { - struct iomuxc_mux_ctl *muxctl; - struct iomuxc_pad_ctl *padctl; - u32 gpio_mux_mode = MX25_PIN_MUX_MODE(5); - u32 gpio_mux_mode0_sion = MX25_PIN_MUX_MODE(0) | MX25_PIN_MUX_SION; - - /* FEC pin init is generic */ - mx25_fec_init_pins(); - - muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE; - padctl = (struct iomuxc_pad_ctl *)IMX_IOPADCTL_BASE; - /* - * Set up FEC_RESET_B and FEC_ENABLE_B - * - * FEC_RESET_B: gpio2_3 is ALT 5 mode of pin D12 - * FEC_ENABLE_B: gpio4_8 is ALT 5 mode of pin A17 - */ - writel(gpio_mux_mode, &muxctl->pad_d12); - writel(gpio_mux_mode, &muxctl->pad_a17); - - writel(0x0, &padctl->pad_d12); - writel(0x0, &padctl->pad_a17); + static const iomux_v3_cfg_t fec_pads[] = { + MX25_PAD_FEC_TX_CLK__FEC_TX_CLK, + MX25_PAD_FEC_RX_DV__FEC_RX_DV, + MX25_PAD_FEC_RDATA0__FEC_RDATA0, + NEW_PAD_CTRL(MX25_PAD_FEC_TDATA0__FEC_TDATA0, FEC_OUT_PAD_CTRL), + NEW_PAD_CTRL(MX25_PAD_FEC_TX_EN__FEC_TX_EN, FEC_OUT_PAD_CTRL), + NEW_PAD_CTRL(MX25_PAD_FEC_MDC__FEC_MDC, FEC_OUT_PAD_CTRL), + MX25_PAD_FEC_MDIO__FEC_MDIO, + MX25_PAD_FEC_RDATA1__FEC_RDATA1, + NEW_PAD_CTRL(MX25_PAD_FEC_TDATA1__FEC_TDATA1, FEC_OUT_PAD_CTRL), + + NEW_PAD_CTRL(MX25_PAD_D12__GPIO_4_8, 0), /* FEC_RESET_B */ + NEW_PAD_CTRL(MX25_PAD_A17__GPIO_2_3, 0), /* FEC_ENABLE_B */ + }; + + static const iomux_v3_cfg_t i2c_pads[] = { + NEW_PAD_CTRL(MX25_PAD_I2C1_CLK__I2C1_CLK, I2C_PAD_CTRL), + NEW_PAD_CTRL(MX25_PAD_I2C1_DAT__I2C1_DAT, I2C_PAD_CTRL), + }; + + imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads)); /* Assert RESET and ENABLE low */ gpio_direction_output(FEC_RESET_B, 0); @@ -78,10 +90,7 @@ static void mx25pdk_fec_init(void) gpio_set_value(FEC_ENABLE_B, 1); /* Setup I2C pins so that PMIC can turn on PHY supply */ - writel(gpio_mux_mode0_sion, &muxctl->pad_i2c1_clk); - writel(gpio_mux_mode0_sion, &muxctl->pad_i2c1_dat); - writel(0x1E8, &padctl->pad_i2c1_clk); - writel(0x1E8, &padctl->pad_i2c1_dat); + imx_iomux_v3_setup_multiple_pads(i2c_pads, ARRAY_SIZE(i2c_pads)); } int dram_init(void) @@ -92,9 +101,35 @@ int dram_init(void) return 0; } +/* + * Set up input pins with hysteresis and 100-k pull-ups + */ +#define UART1_IN_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP) +/* + * FIXME: need to revisit this + * The original code enabled PUE and 100-k pull-down without PKE, so the right + * value here is likely: + * 0 for no pull + * or: + * PAD_CTL_PUS_100K_DOWN for 100-k pull-down + */ +#define UART1_OUT_PAD_CTRL 0 + +static void mx25pdk_uart1_init(void) +{ + static const iomux_v3_cfg_t uart1_pads[] = { + NEW_PAD_CTRL(MX25_PAD_UART1_RXD__UART1_RXD, UART1_IN_PAD_CTRL), + NEW_PAD_CTRL(MX25_PAD_UART1_TXD__UART1_TXD, UART1_OUT_PAD_CTRL), + NEW_PAD_CTRL(MX25_PAD_UART1_RTS__UART1_RTS, UART1_OUT_PAD_CTRL), + NEW_PAD_CTRL(MX25_PAD_UART1_CTS__UART1_CTS, UART1_IN_PAD_CTRL), + }; + + imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); +} + int board_early_init_f(void) { - mx25_uart1_init_pins(); + mx25pdk_uart1_init(); return 0; } @@ -131,21 +166,8 @@ int board_late_init(void) #ifdef CONFIG_FSL_ESDHC int board_mmc_getcd(struct mmc *mmc) { - struct iomuxc_mux_ctl *muxctl; - struct iomuxc_pad_ctl *padctl; - u32 gpio_mux_mode = MX25_PIN_MUX_MODE(5); - - /* - * Set up the Card Detect pin. - * - * SD1_GPIO_CD: gpio2_1 is ALT 5 mode of pin A15 - * - */ - muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE; - padctl = (struct iomuxc_pad_ctl *)IMX_IOPADCTL_BASE; - - writel(gpio_mux_mode, &muxctl->pad_a15); - writel(0x0, &padctl->pad_a15); + /* Set up the Card Detect pin. */ + imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX25_PAD_A15__GPIO_2_1, 0)); gpio_direction_input(CARD_DETECT); return !gpio_get_value(CARD_DETECT); @@ -153,16 +175,16 @@ int board_mmc_getcd(struct mmc *mmc) int board_mmc_init(bd_t *bis) { - struct iomuxc_mux_ctl *muxctl; - u32 sdhc1_mux_mode = MX25_PIN_MUX_MODE(0) | MX25_PIN_MUX_SION; - - muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE; - writel(sdhc1_mux_mode, &muxctl->pad_sd1_cmd); - writel(sdhc1_mux_mode, &muxctl->pad_sd1_clk); - writel(sdhc1_mux_mode, &muxctl->pad_sd1_data0); - writel(sdhc1_mux_mode, &muxctl->pad_sd1_data1); - writel(sdhc1_mux_mode, &muxctl->pad_sd1_data2); - writel(sdhc1_mux_mode, &muxctl->pad_sd1_data3); + static const iomux_v3_cfg_t sdhc1_pads[] = { + NEW_PAD_CTRL(MX25_PAD_SD1_CMD__SD1_CMD, NO_PAD_CTRL), + NEW_PAD_CTRL(MX25_PAD_SD1_CLK__SD1_CLK, NO_PAD_CTRL), + NEW_PAD_CTRL(MX25_PAD_SD1_DATA0__SD1_DATA0, NO_PAD_CTRL), + NEW_PAD_CTRL(MX25_PAD_SD1_DATA1__SD1_DATA1, NO_PAD_CTRL), + NEW_PAD_CTRL(MX25_PAD_SD1_DATA2__SD1_DATA2, NO_PAD_CTRL), + NEW_PAD_CTRL(MX25_PAD_SD1_DATA3__SD1_DATA3, NO_PAD_CTRL), + }; + + imx_iomux_v3_setup_multiple_pads(sdhc1_pads, ARRAY_SIZE(sdhc1_pads)); esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK); return fsl_esdhc_initialize(bis, &esdhc_cfg[0]); diff --git a/board/freescale/mx35pdk/mx35pdk.c b/board/freescale/mx35pdk/mx35pdk.c index b7f474e..9f667d2 100644 --- a/board/freescale/mx35pdk/mx35pdk.c +++ b/board/freescale/mx35pdk/mx35pdk.c @@ -28,8 +28,7 @@ #include <asm/arch/imx-regs.h> #include <asm/arch/crm_regs.h> #include <asm/arch/clock.h> -#include <asm/arch/mx35_pins.h> -#include <asm/arch/iomux.h> +#include <asm/arch/iomux-mx35.h> #include <i2c.h> #include <power/pmic.h> #include <fsl_pmic.h> @@ -73,114 +72,88 @@ void dram_init_banksize(void) gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; } +#define I2C_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN | PAD_CTL_ODE) + static void setup_iomux_i2c(void) { - int pad; + static const iomux_v3_cfg_t i2c1_pads[] = { + NEW_PAD_CTRL(MX35_PAD_I2C1_CLK__I2C1_SCL, I2C_PAD_CTRL), + NEW_PAD_CTRL(MX35_PAD_I2C1_DAT__I2C1_SDA, I2C_PAD_CTRL), + }; /* setup pins for I2C1 */ - mxc_request_iomux(MX35_PIN_I2C1_CLK, MUX_CONFIG_SION); - mxc_request_iomux(MX35_PIN_I2C1_DAT, MUX_CONFIG_SION); - - pad = (PAD_CTL_HYS_SCHMITZ | PAD_CTL_PKE_ENABLE \ - | PAD_CTL_PUE_PUD | PAD_CTL_ODE_OpenDrain); - - mxc_iomux_set_pad(MX35_PIN_I2C1_CLK, pad); - mxc_iomux_set_pad(MX35_PIN_I2C1_DAT, pad); + imx_iomux_v3_setup_multiple_pads(i2c1_pads, ARRAY_SIZE(i2c1_pads)); } static void setup_iomux_spi(void) { - mxc_request_iomux(MX35_PIN_CSPI1_MOSI, MUX_CONFIG_SION); - mxc_request_iomux(MX35_PIN_CSPI1_MISO, MUX_CONFIG_SION); - mxc_request_iomux(MX35_PIN_CSPI1_SS0, MUX_CONFIG_SION); - mxc_request_iomux(MX35_PIN_CSPI1_SS1, MUX_CONFIG_SION); - mxc_request_iomux(MX35_PIN_CSPI1_SCLK, MUX_CONFIG_SION); + static const iomux_v3_cfg_t spi_pads[] = { + MX35_PAD_CSPI1_MOSI__CSPI1_MOSI, + MX35_PAD_CSPI1_MISO__CSPI1_MISO, + MX35_PAD_CSPI1_SS0__CSPI1_SS0, + MX35_PAD_CSPI1_SS1__CSPI1_SS1, + MX35_PAD_CSPI1_SCLK__CSPI1_SCLK, + }; + + imx_iomux_v3_setup_multiple_pads(spi_pads, ARRAY_SIZE(spi_pads)); } +#define USBOTG_IN_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN | \ + PAD_CTL_DSE_LOW | PAD_CTL_SRE_SLOW) +#define USBOTG_OUT_PAD_CTRL (PAD_CTL_DSE_LOW | PAD_CTL_SRE_SLOW) + static void setup_iomux_usbotg(void) { - int in_pad, out_pad; + static const iomux_v3_cfg_t usbotg_pads[] = { + NEW_PAD_CTRL(MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR, + USBOTG_OUT_PAD_CTRL), + NEW_PAD_CTRL(MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC, + USBOTG_IN_PAD_CTRL), + }; /* Set up pins for USBOTG. */ - mxc_request_iomux(MX35_PIN_USBOTG_PWR, - MUX_CONFIG_SION | MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_USBOTG_OC, - MUX_CONFIG_SION | MUX_CONFIG_FUNC); - - in_pad = PAD_CTL_DRV_3_3V | PAD_CTL_HYS_SCHMITZ | PAD_CTL_PKE_ENABLE | - PAD_CTL_PUE_PUD | PAD_CTL_100K_PD | PAD_CTL_ODE_CMOS | - PAD_CTL_DRV_NORMAL | PAD_CTL_SRE_SLOW; - out_pad = PAD_CTL_DRV_3_3V | PAD_CTL_HYS_CMOS | PAD_CTL_PKE_NONE | - PAD_CTL_ODE_CMOS | PAD_CTL_DRV_NORMAL | PAD_CTL_SRE_SLOW; - - mxc_iomux_set_pad(MX35_PIN_USBOTG_PWR, out_pad); - mxc_iomux_set_pad(MX35_PIN_USBOTG_OC, in_pad); + imx_iomux_v3_setup_multiple_pads(usbotg_pads, ARRAY_SIZE(usbotg_pads)); } +#define FEC_PAD_CTRL (PAD_CTL_DSE_LOW | PAD_CTL_SRE_SLOW) + static void setup_iomux_fec(void) { - int pad; + static const iomux_v3_cfg_t fec_pads[] = { + NEW_PAD_CTRL(MX35_PAD_FEC_TX_CLK__FEC_TX_CLK, FEC_PAD_CTRL | + PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN), + NEW_PAD_CTRL(MX35_PAD_FEC_RX_CLK__FEC_RX_CLK, FEC_PAD_CTRL | + PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN), + NEW_PAD_CTRL(MX35_PAD_FEC_RX_DV__FEC_RX_DV, FEC_PAD_CTRL | + PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN), + NEW_PAD_CTRL(MX35_PAD_FEC_COL__FEC_COL, FEC_PAD_CTRL | + PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN), + NEW_PAD_CTRL(MX35_PAD_FEC_RDATA0__FEC_RDATA_0, FEC_PAD_CTRL | + PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN), + NEW_PAD_CTRL(MX35_PAD_FEC_TDATA0__FEC_TDATA_0, FEC_PAD_CTRL), + NEW_PAD_CTRL(MX35_PAD_FEC_TX_EN__FEC_TX_EN, FEC_PAD_CTRL), + NEW_PAD_CTRL(MX35_PAD_FEC_MDC__FEC_MDC, FEC_PAD_CTRL), + NEW_PAD_CTRL(MX35_PAD_FEC_MDIO__FEC_MDIO, FEC_PAD_CTRL | + PAD_CTL_HYS | PAD_CTL_PUS_22K_UP), + NEW_PAD_CTRL(MX35_PAD_FEC_TX_ERR__FEC_TX_ERR, FEC_PAD_CTRL), + NEW_PAD_CTRL(MX35_PAD_FEC_RX_ERR__FEC_RX_ERR, FEC_PAD_CTRL | + PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN), + NEW_PAD_CTRL(MX35_PAD_FEC_CRS__FEC_CRS, FEC_PAD_CTRL | + PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN), + NEW_PAD_CTRL(MX35_PAD_FEC_RDATA1__FEC_RDATA_1, FEC_PAD_CTRL | + PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN), + NEW_PAD_CTRL(MX35_PAD_FEC_TDATA1__FEC_TDATA_1, FEC_PAD_CTRL), + NEW_PAD_CTRL(MX35_PAD_FEC_RDATA2__FEC_RDATA_2, FEC_PAD_CTRL | + PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN), + NEW_PAD_CTRL(MX35_PAD_FEC_TDATA2__FEC_TDATA_2, FEC_PAD_CTRL), + NEW_PAD_CTRL(MX35_PAD_FEC_RDATA3__FEC_RDATA_3, FEC_PAD_CTRL | + PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN), + NEW_PAD_CTRL(MX35_PAD_FEC_TDATA3__FEC_TDATA_3, FEC_PAD_CTRL), + }; /* setup pins for FEC */ - mxc_request_iomux(MX35_PIN_FEC_TX_CLK, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_RX_CLK, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_RX_DV, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_COL, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_RDATA0, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_TDATA0, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_TX_EN, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_MDC, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_MDIO, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_TX_ERR, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_RX_ERR, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_CRS, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_RDATA1, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_TDATA1, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_RDATA2, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_TDATA2, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_RDATA3, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_TDATA3, MUX_CONFIG_FUNC); - - pad = (PAD_CTL_DRV_3_3V | PAD_CTL_PUE_PUD | PAD_CTL_ODE_CMOS | \ - PAD_CTL_DRV_NORMAL | PAD_CTL_SRE_SLOW); - - mxc_iomux_set_pad(MX35_PIN_FEC_TX_CLK, pad | PAD_CTL_HYS_SCHMITZ | \ - PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD); - mxc_iomux_set_pad(MX35_PIN_FEC_RX_CLK, pad | PAD_CTL_HYS_SCHMITZ | \ - PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD); - mxc_iomux_set_pad(MX35_PIN_FEC_RX_DV, pad | PAD_CTL_HYS_SCHMITZ | \ - PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD); - mxc_iomux_set_pad(MX35_PIN_FEC_COL, pad | PAD_CTL_HYS_SCHMITZ | \ - PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD); - mxc_iomux_set_pad(MX35_PIN_FEC_RDATA0, pad | PAD_CTL_HYS_SCHMITZ | \ - PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD); - mxc_iomux_set_pad(MX35_PIN_FEC_TDATA0, pad | PAD_CTL_HYS_CMOS | \ - PAD_CTL_PKE_NONE | PAD_CTL_100K_PD); - mxc_iomux_set_pad(MX35_PIN_FEC_TX_EN, pad | PAD_CTL_HYS_CMOS | \ - PAD_CTL_PKE_NONE | PAD_CTL_100K_PD); - mxc_iomux_set_pad(MX35_PIN_FEC_MDC, pad | PAD_CTL_HYS_CMOS | \ - PAD_CTL_PKE_NONE | PAD_CTL_100K_PD); - mxc_iomux_set_pad(MX35_PIN_FEC_MDIO, pad | PAD_CTL_HYS_SCHMITZ | \ - PAD_CTL_PKE_ENABLE | PAD_CTL_22K_PU); - mxc_iomux_set_pad(MX35_PIN_FEC_TX_ERR, pad | PAD_CTL_HYS_CMOS | \ - PAD_CTL_PKE_NONE | PAD_CTL_100K_PD); - mxc_iomux_set_pad(MX35_PIN_FEC_RX_ERR, pad | PAD_CTL_HYS_SCHMITZ | \ - PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD); - mxc_iomux_set_pad(MX35_PIN_FEC_CRS, pad | PAD_CTL_HYS_SCHMITZ | \ - PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD); - mxc_iomux_set_pad(MX35_PIN_FEC_RDATA1, pad | PAD_CTL_HYS_SCHMITZ | \ - PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD); - mxc_iomux_set_pad(MX35_PIN_FEC_TDATA1, pad | PAD_CTL_HYS_CMOS | \ - PAD_CTL_PKE_NONE | PAD_CTL_100K_PD); - mxc_iomux_set_pad(MX35_PIN_FEC_RDATA2, pad | PAD_CTL_HYS_SCHMITZ | \ - PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD); - mxc_iomux_set_pad(MX35_PIN_FEC_TDATA2, pad | PAD_CTL_HYS_CMOS | \ - PAD_CTL_PKE_NONE | PAD_CTL_100K_PD); - mxc_iomux_set_pad(MX35_PIN_FEC_RDATA3, pad | PAD_CTL_HYS_SCHMITZ | \ - PAD_CTL_PKE_ENABLE | PAD_CTL_100K_PD); - mxc_iomux_set_pad(MX35_PIN_FEC_TDATA3, pad | PAD_CTL_HYS_CMOS | \ - PAD_CTL_PKE_NONE | PAD_CTL_100K_PD); + imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads)); } int board_early_init_f(void) @@ -262,8 +235,7 @@ int board_late_init(void) if (pmic_detect()) { p = pmic_get("FSL_PMIC"); - mxc_request_iomux(MX35_PIN_WATCHDOG_RST, MUX_CONFIG_SION | - MUX_CONFIG_ALT1); + imx_iomux_v3_setup_pad(MX35_PAD_WDOG_RST__WDOG_WDOG_B); pmic_reg_read(p, REG_SETTING_0, &pmic_val); pmic_reg_write(p, REG_SETTING_0, @@ -271,10 +243,9 @@ int board_late_init(void) pmic_reg_read(p, REG_MODE_0, &pmic_val); pmic_reg_write(p, REG_MODE_0, pmic_val | VGEN3EN); - mxc_request_iomux(MX35_PIN_COMPARE, MUX_CONFIG_GPIO); - mxc_iomux_set_input(MUX_IN_GPIO1_IN_5, INPUT_CTL_PATH0); + imx_iomux_v3_setup_pad(MX35_PAD_COMPARE__GPIO1_5); - gpio_direction_output(IMX_GPIO_NR(2, 5), 1); + gpio_direction_output(IMX_GPIO_NR(1, 5), 1); } val = mc9sdz60_reg_read(MC9SDZ60_REG_GPIO_1) | 0x04; @@ -312,13 +283,17 @@ struct fsl_esdhc_cfg esdhc_cfg = {MMC_SDHC1_BASE_ADDR}; int board_mmc_init(bd_t *bis) { + static const iomux_v3_cfg_t sdhc1_pads[] = { + MX35_PAD_SD1_CMD__ESDHC1_CMD, + MX35_PAD_SD1_CLK__ESDHC1_CLK, + MX35_PAD_SD1_DATA0__ESDHC1_DAT0, + MX35_PAD_SD1_DATA1__ESDHC1_DAT1, + MX35_PAD_SD1_DATA2__ESDHC1_DAT2, + MX35_PAD_SD1_DATA3__ESDHC1_DAT3, + }; + /* configure pins for SDHC1 only */ - mxc_request_iomux(MX35_PIN_SD1_CMD, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_SD1_CLK, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_SD1_DATA0, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_SD1_DATA1, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_SD1_DATA2, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_SD1_DATA3, MUX_CONFIG_FUNC); + imx_iomux_v3_setup_multiple_pads(sdhc1_pads, ARRAY_SIZE(sdhc1_pads)); esdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK); return fsl_esdhc_initialize(bis, &esdhc_cfg); diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c index 54c16b1..369da6d 100644 --- a/board/freescale/mx51evk/mx51evk.c +++ b/board/freescale/mx51evk/mx51evk.c @@ -24,8 +24,7 @@ #include <asm/io.h> #include <asm/gpio.h> #include <asm/arch/imx-regs.h> -#include <asm/arch/mx5x_pins.h> -#include <asm/arch/iomux.h> +#include <asm/arch/iomux-mx51.h> #include <asm/errno.h> #include <asm/arch/sys_proto.h> #include <asm/arch/crm_regs.h> @@ -64,160 +63,103 @@ u32 get_board_rev(void) return rev; } +#define UART_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN | PAD_CTL_DSE_HIGH) + static void setup_iomux_uart(void) { - unsigned int pad = PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE | - PAD_CTL_PUE_PULL | PAD_CTL_DRV_HIGH; - - mxc_request_iomux(MX51_PIN_UART1_RXD, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_UART1_RXD, pad | PAD_CTL_SRE_FAST); - mxc_request_iomux(MX51_PIN_UART1_TXD, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_UART1_TXD, pad | PAD_CTL_SRE_FAST); - mxc_request_iomux(MX51_PIN_UART1_RTS, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_UART1_RTS, pad); - mxc_request_iomux(MX51_PIN_UART1_CTS, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_UART1_CTS, pad); + static const iomux_v3_cfg_t uart_pads[] = { + MX51_PAD_UART1_RXD__UART1_RXD, + MX51_PAD_UART1_TXD__UART1_TXD, + NEW_PAD_CTRL(MX51_PAD_UART1_RTS__UART1_RTS, UART_PAD_CTRL), + NEW_PAD_CTRL(MX51_PAD_UART1_CTS__UART1_CTS, UART_PAD_CTRL), + }; + + imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads)); } static void setup_iomux_fec(void) { - /*FEC_MDIO*/ - mxc_request_iomux(MX51_PIN_EIM_EB2 , IOMUX_CONFIG_ALT3); - mxc_iomux_set_pad(MX51_PIN_EIM_EB2 , 0x1FD); - - /*FEC_MDC*/ - mxc_request_iomux(MX51_PIN_NANDF_CS3, IOMUX_CONFIG_ALT2); - mxc_iomux_set_pad(MX51_PIN_NANDF_CS3, 0x2004); - - /* FEC RDATA[3] */ - mxc_request_iomux(MX51_PIN_EIM_CS3, IOMUX_CONFIG_ALT3); - mxc_iomux_set_pad(MX51_PIN_EIM_CS3, 0x180); - - /* FEC RDATA[2] */ - mxc_request_iomux(MX51_PIN_EIM_CS2, IOMUX_CONFIG_ALT3); - mxc_iomux_set_pad(MX51_PIN_EIM_CS2, 0x180); - - /* FEC RDATA[1] */ - mxc_request_iomux(MX51_PIN_EIM_EB3, IOMUX_CONFIG_ALT3); - mxc_iomux_set_pad(MX51_PIN_EIM_EB3, 0x180); - - /* FEC RDATA[0] */ - mxc_request_iomux(MX51_PIN_NANDF_D9, IOMUX_CONFIG_ALT2); - mxc_iomux_set_pad(MX51_PIN_NANDF_D9, 0x2180); - - /* FEC TDATA[3] */ - mxc_request_iomux(MX51_PIN_NANDF_CS6, IOMUX_CONFIG_ALT2); - mxc_iomux_set_pad(MX51_PIN_NANDF_CS6, 0x2004); - - /* FEC TDATA[2] */ - mxc_request_iomux(MX51_PIN_NANDF_CS5, IOMUX_CONFIG_ALT2); - mxc_iomux_set_pad(MX51_PIN_NANDF_CS5, 0x2004); - - /* FEC TDATA[1] */ - mxc_request_iomux(MX51_PIN_NANDF_CS4, IOMUX_CONFIG_ALT2); - mxc_iomux_set_pad(MX51_PIN_NANDF_CS4, 0x2004); - - /* FEC TDATA[0] */ - mxc_request_iomux(MX51_PIN_NANDF_D8, IOMUX_CONFIG_ALT2); - mxc_iomux_set_pad(MX51_PIN_NANDF_D8, 0x2004); - - /* FEC TX_EN */ - mxc_request_iomux(MX51_PIN_NANDF_CS7, IOMUX_CONFIG_ALT1); - mxc_iomux_set_pad(MX51_PIN_NANDF_CS7, 0x2004); - - /* FEC TX_ER */ - mxc_request_iomux(MX51_PIN_NANDF_CS2, IOMUX_CONFIG_ALT2); - mxc_iomux_set_pad(MX51_PIN_NANDF_CS2, 0x2004); - - /* FEC TX_CLK */ - mxc_request_iomux(MX51_PIN_NANDF_RDY_INT, IOMUX_CONFIG_ALT1); - mxc_iomux_set_pad(MX51_PIN_NANDF_RDY_INT, 0x2180); - - /* FEC TX_COL */ - mxc_request_iomux(MX51_PIN_NANDF_RB2, IOMUX_CONFIG_ALT1); - mxc_iomux_set_pad(MX51_PIN_NANDF_RB2, 0x2180); - - /* FEC RX_CLK */ - mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_ALT1); - mxc_iomux_set_pad(MX51_PIN_NANDF_RB3, 0x2180); - - /* FEC RX_CRS */ - mxc_request_iomux(MX51_PIN_EIM_CS5, IOMUX_CONFIG_ALT3); - mxc_iomux_set_pad(MX51_PIN_EIM_CS5, 0x180); - - /* FEC RX_ER */ - mxc_request_iomux(MX51_PIN_EIM_CS4, IOMUX_CONFIG_ALT3); - mxc_iomux_set_pad(MX51_PIN_EIM_CS4, 0x180); - - /* FEC RX_DV */ - mxc_request_iomux(MX51_PIN_NANDF_D11, IOMUX_CONFIG_ALT2); - mxc_iomux_set_pad(MX51_PIN_NANDF_D11, 0x2180); + static const iomux_v3_cfg_t fec_pads[] = { + NEW_PAD_CTRL(MX51_PAD_EIM_EB2__FEC_MDIO, PAD_CTL_HYS | + PAD_CTL_PUS_22K_UP | PAD_CTL_ODE | + PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST), + MX51_PAD_NANDF_CS3__FEC_MDC, + NEW_PAD_CTRL(MX51_PAD_EIM_CS3__FEC_RDATA3, MX51_PAD_CTRL_2), + NEW_PAD_CTRL(MX51_PAD_EIM_CS2__FEC_RDATA2, MX51_PAD_CTRL_2), + NEW_PAD_CTRL(MX51_PAD_EIM_EB3__FEC_RDATA1, MX51_PAD_CTRL_2), + MX51_PAD_NANDF_D9__FEC_RDATA0, + MX51_PAD_NANDF_CS6__FEC_TDATA3, + MX51_PAD_NANDF_CS5__FEC_TDATA2, + MX51_PAD_NANDF_CS4__FEC_TDATA1, + MX51_PAD_NANDF_D8__FEC_TDATA0, + MX51_PAD_NANDF_CS7__FEC_TX_EN, + MX51_PAD_NANDF_CS2__FEC_TX_ER, + MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK, + NEW_PAD_CTRL(MX51_PAD_NANDF_RB2__FEC_COL, MX51_PAD_CTRL_4), + NEW_PAD_CTRL(MX51_PAD_NANDF_RB3__FEC_RX_CLK, MX51_PAD_CTRL_4), + MX51_PAD_EIM_CS5__FEC_CRS, + MX51_PAD_EIM_CS4__FEC_RX_ER, + NEW_PAD_CTRL(MX51_PAD_NANDF_D11__FEC_RX_DV, MX51_PAD_CTRL_4), + }; + + imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads)); } #ifdef CONFIG_MXC_SPI static void setup_iomux_spi(void) { - /* 000: Select mux mode: ALT0 mux port: MOSI of instance: ecspi1 */ - mxc_request_iomux(MX51_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_CSPI1_MOSI, 0x105); - - /* 000: Select mux mode: ALT0 mux port: MISO of instance: ecspi1. */ - mxc_request_iomux(MX51_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_CSPI1_MISO, 0x105); - - /* de-select SS1 of instance: ecspi1. */ - mxc_request_iomux(MX51_PIN_CSPI1_SS1, IOMUX_CONFIG_ALT3); - mxc_iomux_set_pad(MX51_PIN_CSPI1_SS1, 0x85); - - /* 000: Select mux mode: ALT0 mux port: SS0 ecspi1 */ - mxc_request_iomux(MX51_PIN_CSPI1_SS0, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_CSPI1_SS0, 0x185); - - /* 000: Select mux mode: ALT0 mux port: RDY of instance: ecspi1. */ - mxc_request_iomux(MX51_PIN_CSPI1_RDY, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_CSPI1_RDY, 0x180); - - /* 000: Select mux mode: ALT0 mux port: SCLK of instance: ecspi1. */ - mxc_request_iomux(MX51_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_CSPI1_SCLK, 0x105); + static const iomux_v3_cfg_t spi_pads[] = { + NEW_PAD_CTRL(MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI, PAD_CTL_HYS | + PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST), + NEW_PAD_CTRL(MX51_PAD_CSPI1_MISO__ECSPI1_MISO, PAD_CTL_HYS | + PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST), + NEW_PAD_CTRL(MX51_PAD_CSPI1_SS1__ECSPI1_SS1, + MX51_GPIO_PAD_CTRL), + MX51_PAD_CSPI1_SS0__ECSPI1_SS0, + NEW_PAD_CTRL(MX51_PAD_CSPI1_RDY__ECSPI1_RDY, MX51_PAD_CTRL_2), + NEW_PAD_CTRL(MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK, PAD_CTL_HYS | + PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST), + }; + + imx_iomux_v3_setup_multiple_pads(spi_pads, ARRAY_SIZE(spi_pads)); } #endif #ifdef CONFIG_USB_EHCI_MX5 -#define MX51EVK_USBH1_HUB_RST IOMUX_TO_GPIO(MX51_PIN_GPIO1_7) /* GPIO1_7 */ -#define MX51EVK_USBH1_STP IOMUX_TO_GPIO(MX51_PIN_USBH1_STP) /* GPIO1_27 */ -#define MX51EVK_USB_CLK_EN_B IOMUX_TO_GPIO(MX51_PIN_EIM_D18) /* GPIO2_1 */ -#define MX51EVK_USB_PHY_RESET IOMUX_TO_GPIO(MX51_PIN_EIM_D21) /* GPIO2_5 */ - -#define USBH1_PAD (PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH | \ - PAD_CTL_100K_PU | PAD_CTL_PUE_PULL | \ - PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE) -#define GPIO_PAD (PAD_CTL_DRV_HIGH | PAD_CTL_PKE_ENABLE | \ - PAD_CTL_SRE_FAST) -#define NO_PAD (1 << 16) +#define MX51EVK_USBH1_HUB_RST IMX_GPIO_NR(1, 7) +#define MX51EVK_USBH1_STP IMX_GPIO_NR(1, 27) +#define MX51EVK_USB_CLK_EN_B IMX_GPIO_NR(2, 2) +#define MX51EVK_USB_PHY_RESET IMX_GPIO_NR(2, 5) static void setup_usb_h1(void) { - setup_iomux_usb_h1(); - - /* GPIO_1_7 for USBH1 hub reset */ - mxc_request_iomux(MX51_PIN_GPIO1_7, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_GPIO1_7, NO_PAD); - - /* GPIO_2_1 */ - mxc_request_iomux(MX51_PIN_EIM_D17, IOMUX_CONFIG_ALT1); - mxc_iomux_set_pad(MX51_PIN_EIM_D17, GPIO_PAD); - - /* GPIO_2_5 for USB PHY reset */ - mxc_request_iomux(MX51_PIN_EIM_D21, IOMUX_CONFIG_ALT1); - mxc_iomux_set_pad(MX51_PIN_EIM_D21, GPIO_PAD); + static const iomux_v3_cfg_t usb_h1_pads[] = { + MX51_PAD_USBH1_CLK__USBH1_CLK, + MX51_PAD_USBH1_DIR__USBH1_DIR, + MX51_PAD_USBH1_STP__USBH1_STP, + MX51_PAD_USBH1_NXT__USBH1_NXT, + MX51_PAD_USBH1_DATA0__USBH1_DATA0, + MX51_PAD_USBH1_DATA1__USBH1_DATA1, + MX51_PAD_USBH1_DATA2__USBH1_DATA2, + MX51_PAD_USBH1_DATA3__USBH1_DATA3, + MX51_PAD_USBH1_DATA4__USBH1_DATA4, + MX51_PAD_USBH1_DATA5__USBH1_DATA5, + MX51_PAD_USBH1_DATA6__USBH1_DATA6, + MX51_PAD_USBH1_DATA7__USBH1_DATA7, + + NEW_PAD_CTRL(MX51_PAD_GPIO1_7__GPIO1_7, 0), /* H1 hub reset */ + MX51_PAD_EIM_D17__GPIO2_1, + MX51_PAD_EIM_D21__GPIO2_5, /* PHY reset */ + }; + + imx_iomux_v3_setup_multiple_pads(usb_h1_pads, ARRAY_SIZE(usb_h1_pads)); } int board_ehci_hcd_init(int port) { /* Set USBH1_STP to GPIO and toggle it */ - mxc_request_iomux(MX51_PIN_USBH1_STP, IOMUX_CONFIG_GPIO); - mxc_iomux_set_pad(MX51_PIN_USBH1_STP, USBH1_PAD); + imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_USBH1_STP__GPIO1_27, + MX51_USBH_PAD_CTRL)); gpio_direction_output(MX51EVK_USBH1_STP, 0); gpio_direction_output(MX51EVK_USB_PHY_RESET, 0); @@ -225,8 +167,7 @@ int board_ehci_hcd_init(int port) gpio_set_value(MX51EVK_USBH1_STP, 1); /* Set back USBH1_STP to be function */ - mxc_request_iomux(MX51_PIN_USBH1_STP, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_USBH1_STP, USBH1_PAD); + imx_iomux_v3_setup_pad(MX51_PAD_USBH1_STP__USBH1_STP); /* De-assert USB PHY RESETB */ gpio_set_value(MX51EVK_USB_PHY_RESET, 1); @@ -328,7 +269,8 @@ static void power_init(void) VVIDEOEN | VAUDIOEN | VSDEN; pmic_reg_write(p, REG_MODE_1, val); - mxc_request_iomux(MX51_PIN_EIM_A20, IOMUX_CONFIG_ALT1); + imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_EIM_A20__GPIO2_14, + NO_PAD_CTRL)); gpio_direction_output(IMX_GPIO_NR(2, 14), 0); udelay(500); @@ -342,9 +284,11 @@ int board_mmc_getcd(struct mmc *mmc) struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; int ret; - mxc_request_iomux(MX51_PIN_GPIO1_0, IOMUX_CONFIG_ALT1); + imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_GPIO1_0__GPIO1_0, + NO_PAD_CTRL)); gpio_direction_input(IMX_GPIO_NR(1, 0)); - mxc_request_iomux(MX51_PIN_GPIO1_6, IOMUX_CONFIG_ALT0); + imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_GPIO1_6__GPIO1_6, + NO_PAD_CTRL)); gpio_direction_input(IMX_GPIO_NR(1, 6)); if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR) @@ -357,6 +301,40 @@ int board_mmc_getcd(struct mmc *mmc) int board_mmc_init(bd_t *bis) { + static const iomux_v3_cfg_t sd1_pads[] = { + NEW_PAD_CTRL(MX51_PAD_SD1_CMD__SD1_CMD, PAD_CTL_DSE_MAX | + PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST), + NEW_PAD_CTRL(MX51_PAD_SD1_CLK__SD1_CLK, PAD_CTL_DSE_MAX | + PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST), + NEW_PAD_CTRL(MX51_PAD_SD1_DATA0__SD1_DATA0, PAD_CTL_DSE_MAX | + PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST), + NEW_PAD_CTRL(MX51_PAD_SD1_DATA1__SD1_DATA1, PAD_CTL_DSE_MAX | + PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST), + NEW_PAD_CTRL(MX51_PAD_SD1_DATA2__SD1_DATA2, PAD_CTL_DSE_MAX | + PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST), + NEW_PAD_CTRL(MX51_PAD_SD1_DATA3__SD1_DATA3, PAD_CTL_DSE_MAX | + PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN | PAD_CTL_SRE_FAST), + NEW_PAD_CTRL(MX51_PAD_GPIO1_0__SD1_CD, PAD_CTL_HYS), + NEW_PAD_CTRL(MX51_PAD_GPIO1_1__SD1_WP, PAD_CTL_HYS), + }; + + static const iomux_v3_cfg_t sd2_pads[] = { + NEW_PAD_CTRL(MX51_PAD_SD2_CMD__SD2_CMD, + PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST), + NEW_PAD_CTRL(MX51_PAD_SD2_CLK__SD2_CLK, + PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST), + NEW_PAD_CTRL(MX51_PAD_SD2_DATA0__SD2_DATA0, + PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST), + NEW_PAD_CTRL(MX51_PAD_SD2_DATA1__SD2_DATA1, + PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST), + NEW_PAD_CTRL(MX51_PAD_SD2_DATA2__SD2_DATA2, + PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST), + NEW_PAD_CTRL(MX51_PAD_SD2_DATA3__SD2_DATA3, + PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST), + NEW_PAD_CTRL(MX51_PAD_GPIO1_6__GPIO1_6, PAD_CTL_HYS), + NEW_PAD_CTRL(MX51_PAD_GPIO1_5__GPIO1_5, PAD_CTL_HYS), + }; + u32 index; s32 status = 0; @@ -367,98 +345,12 @@ int board_mmc_init(bd_t *bis) index++) { switch (index) { case 0: - mxc_request_iomux(MX51_PIN_SD1_CMD, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_request_iomux(MX51_PIN_SD1_CLK, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_request_iomux(MX51_PIN_SD1_DATA0, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_request_iomux(MX51_PIN_SD1_DATA1, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_request_iomux(MX51_PIN_SD1_DATA2, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_request_iomux(MX51_PIN_SD1_DATA3, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_iomux_set_pad(MX51_PIN_SD1_CMD, - PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | - PAD_CTL_PUE_PULL | - PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_SD1_CLK, - PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | - PAD_CTL_HYS_NONE | PAD_CTL_47K_PU | - PAD_CTL_PUE_PULL | - PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_SD1_DATA0, - PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | - PAD_CTL_PUE_PULL | - PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_SD1_DATA1, - PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | - PAD_CTL_PUE_PULL | - PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_SD1_DATA2, - PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | - PAD_CTL_PUE_PULL | - PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_SD1_DATA3, - PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | - PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PD | - PAD_CTL_PUE_PULL | - PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); - mxc_request_iomux(MX51_PIN_GPIO1_0, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_iomux_set_pad(MX51_PIN_GPIO1_0, - PAD_CTL_HYS_ENABLE); - mxc_request_iomux(MX51_PIN_GPIO1_1, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_iomux_set_pad(MX51_PIN_GPIO1_1, - PAD_CTL_HYS_ENABLE); + imx_iomux_v3_setup_multiple_pads(sd1_pads, + ARRAY_SIZE(sd1_pads)); break; case 1: - mxc_request_iomux(MX51_PIN_SD2_CMD, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_request_iomux(MX51_PIN_SD2_CLK, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_request_iomux(MX51_PIN_SD2_DATA0, - IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX51_PIN_SD2_DATA1, - IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX51_PIN_SD2_DATA2, - IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX51_PIN_SD2_DATA3, - IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_SD2_CMD, - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | - PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_SD2_CLK, - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | - PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_SD2_DATA0, - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | - PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_SD2_DATA1, - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | - PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_SD2_DATA2, - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | - PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_SD2_DATA3, - PAD_CTL_DRV_MAX | PAD_CTL_22K_PU | - PAD_CTL_SRE_FAST); - mxc_request_iomux(MX51_PIN_SD2_CMD, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_request_iomux(MX51_PIN_GPIO1_6, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_iomux_set_pad(MX51_PIN_GPIO1_6, - PAD_CTL_HYS_ENABLE); - mxc_request_iomux(MX51_PIN_GPIO1_5, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_iomux_set_pad(MX51_PIN_GPIO1_5, - PAD_CTL_HYS_ENABLE); + imx_iomux_v3_setup_multiple_pads(sd2_pads, + ARRAY_SIZE(sd2_pads)); break; default: printf("Warning: you configured more ESDHC controller" diff --git a/board/freescale/mx51evk/mx51evk_video.c b/board/freescale/mx51evk/mx51evk_video.c index 7be5c9b..556cb38 100644 --- a/board/freescale/mx51evk/mx51evk_video.c +++ b/board/freescale/mx51evk/mx51evk_video.c @@ -24,7 +24,7 @@ #include <common.h> #include <linux/list.h> #include <asm/gpio.h> -#include <asm/arch/iomux.h> +#include <asm/arch/iomux-mx51.h> #include <linux/fb.h> #include <ipu_pixfmt.h> @@ -67,25 +67,25 @@ static struct fb_videomode const dvi = { void setup_iomux_lcd(void) { /* DI2_PIN15 */ - mxc_request_iomux(MX51_PIN_DI_GP4, IOMUX_CONFIG_ALT4); + imx_iomux_v3_setup_pad(MX51_PAD_DI_GP4__DI2_PIN15); - /* Pad settings for MX51_PIN_DI2_DISP_CLK */ - mxc_iomux_set_pad(MX51_PIN_DI2_DISP_CLK, PAD_CTL_HYS_NONE | - PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | - PAD_CTL_DRV_MAX | PAD_CTL_SRE_SLOW); + /* Pad settings for DI2_DISP_CLK */ + imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK, + PAD_CTL_PKE | PAD_CTL_DSE_MAX | PAD_CTL_SRE_SLOW)); /* Turn on 3.3V voltage for LCD */ - mxc_request_iomux(MX51_PIN_CSI2_D12, IOMUX_CONFIG_ALT3); + imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_CSI2_D12__GPIO4_9, + NO_PAD_CTRL)); gpio_direction_output(MX51EVK_LCD_3V3, 1); /* Turn on 5V voltage for LCD */ - mxc_request_iomux(MX51_PIN_CSI2_D13, IOMUX_CONFIG_ALT3); + imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_CSI2_D13__GPIO4_10, + NO_PAD_CTRL)); gpio_direction_output(MX51EVK_LCD_5V, 1); /* Turn on GPIO backlight */ - mxc_request_iomux(MX51_PIN_DI1_D1_CS, IOMUX_CONFIG_ALT4); - mxc_iomux_set_input(MX51_GPIO3_IPP_IND_G_IN_4_SELECT_INPUT, - INPUT_CTL_PATH1); + imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_DI1_D1_CS__GPIO3_4, + NO_PAD_CTRL)); gpio_direction_output(MX51EVK_LCD_BACKLIGHT, 1); } diff --git a/board/freescale/mx53ard/mx53ard.c b/board/freescale/mx53ard/mx53ard.c index 8d433a3..e2dbf63 100644 --- a/board/freescale/mx53ard/mx53ard.c +++ b/board/freescale/mx53ard/mx53ard.c @@ -23,11 +23,10 @@ #include <common.h> #include <asm/io.h> #include <asm/arch/imx-regs.h> -#include <asm/arch/mx5x_pins.h> #include <asm/arch/sys_proto.h> #include <asm/arch/crm_regs.h> #include <asm/arch/clock.h> -#include <asm/arch/iomux.h> +#include <asm/arch/iomux-mx53.h> #include <asm/errno.h> #include <netdev.h> #include <mmc.h> @@ -61,9 +60,42 @@ void dram_init_banksize(void) #ifdef CONFIG_NAND_MXC static void setup_iomux_nand(void) { + static const iomux_v3_cfg_t nand_pads[] = { + NEW_PAD_CTRL(MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0, + PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1, + PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0, + PAD_CTL_PUS_100K_UP), + NEW_PAD_CTRL(MX53_PAD_NANDF_CLE__EMI_NANDF_CLE, + PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_NANDF_ALE__EMI_NANDF_ALE, + PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B, + PAD_CTL_PUS_100K_UP), + NEW_PAD_CTRL(MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B, + PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B, + PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0, + PAD_CTL_PKE | PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1, + PAD_CTL_PKE | PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2, + PAD_CTL_PKE | PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3, + PAD_CTL_PKE | PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4, + PAD_CTL_PKE | PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5, + PAD_CTL_PKE | PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6, + PAD_CTL_PKE | PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7, + PAD_CTL_PKE | PAD_CTL_DSE_HIGH), + }; + u32 i, reg; - #define M4IF_GENP_WEIM_MM_MASK 0x00000001 - #define WEIM_GCR2_MUX16_BYP_GRANT_MASK 0x00001000 reg = __raw_readl(M4IF_BASE_ADDR + 0xc); reg &= ~M4IF_GENP_WEIM_MM_MASK; @@ -74,48 +106,7 @@ static void setup_iomux_nand(void) __raw_writel(reg, WEIM_BASE_ADDR + i); } - mxc_request_iomux(MX53_PIN_NANDF_CS0, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_NANDF_CS0, PAD_CTL_DRV_HIGH); - mxc_request_iomux(MX53_PIN_NANDF_CS1, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_NANDF_CS1, PAD_CTL_DRV_HIGH); - mxc_request_iomux(MX53_PIN_NANDF_RB0, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_NANDF_RB0, PAD_CTL_PKE_ENABLE | - PAD_CTL_PUE_PULL | PAD_CTL_100K_PU); - mxc_request_iomux(MX53_PIN_NANDF_CLE, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_NANDF_CLE, PAD_CTL_DRV_HIGH); - mxc_request_iomux(MX53_PIN_NANDF_ALE, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_NANDF_ALE, PAD_CTL_DRV_HIGH); - mxc_request_iomux(MX53_PIN_NANDF_WP_B, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_NANDF_WP_B, PAD_CTL_PKE_ENABLE | - PAD_CTL_PUE_PULL | PAD_CTL_100K_PU); - mxc_request_iomux(MX53_PIN_NANDF_RE_B, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_NANDF_RE_B, PAD_CTL_DRV_HIGH); - mxc_request_iomux(MX53_PIN_NANDF_WE_B, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_NANDF_WE_B, PAD_CTL_DRV_HIGH); - mxc_request_iomux(MX53_PIN_EIM_DA0, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_EIM_DA0, PAD_CTL_PKE_ENABLE | - PAD_CTL_100K_PU | PAD_CTL_DRV_HIGH); - mxc_request_iomux(MX53_PIN_EIM_DA1, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_EIM_DA1, PAD_CTL_PKE_ENABLE | - PAD_CTL_100K_PU | PAD_CTL_DRV_HIGH); - mxc_request_iomux(MX53_PIN_EIM_DA2, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_EIM_DA2, PAD_CTL_PKE_ENABLE | - PAD_CTL_100K_PU | PAD_CTL_DRV_HIGH); - mxc_request_iomux(MX53_PIN_EIM_DA3, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_EIM_DA3, PAD_CTL_PKE_ENABLE | - PAD_CTL_100K_PU | PAD_CTL_DRV_HIGH); - mxc_request_iomux(MX53_PIN_EIM_DA4, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_EIM_DA4, PAD_CTL_PKE_ENABLE | - PAD_CTL_100K_PU | PAD_CTL_DRV_HIGH); - mxc_request_iomux(MX53_PIN_EIM_DA5, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_EIM_DA5, PAD_CTL_PKE_ENABLE | - PAD_CTL_100K_PU | PAD_CTL_DRV_HIGH); - mxc_request_iomux(MX53_PIN_EIM_DA6, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_EIM_DA6, PAD_CTL_PKE_ENABLE | - PAD_CTL_100K_PU | PAD_CTL_DRV_HIGH); - mxc_request_iomux(MX53_PIN_EIM_DA7, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_EIM_DA7, PAD_CTL_PKE_ENABLE | - PAD_CTL_100K_PU | PAD_CTL_DRV_HIGH); + imx_iomux_v3_setup_multiple_pads(nand_pads, ARRAY_SIZE(nand_pads)); } #else static void setup_iomux_nand(void) @@ -123,24 +114,17 @@ static void setup_iomux_nand(void) } #endif +#define UART_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_ODE) + static void setup_iomux_uart(void) { - /* UART1 RXD */ - mxc_request_iomux(MX53_PIN_ATA_DMACK, IOMUX_CONFIG_ALT3); - mxc_iomux_set_pad(MX53_PIN_ATA_DMACK, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU | - PAD_CTL_ODE_OPENDRAIN_ENABLE); - mxc_iomux_set_input(MX53_UART1_IPP_UART_RXD_MUX_SELECT_INPUT, 0x3); - - /* UART1 TXD */ - mxc_request_iomux(MX53_PIN_ATA_DIOW, IOMUX_CONFIG_ALT3); - mxc_iomux_set_pad(MX53_PIN_ATA_DIOW, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU | - PAD_CTL_ODE_OPENDRAIN_ENABLE); + static const iomux_v3_cfg_t uart_pads[] = { + NEW_PAD_CTRL(MX53_PAD_PATA_DMACK__UART1_RXD_MUX, UART_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_PATA_DIOW__UART1_TXD_MUX, UART_PAD_CTRL), + }; + + imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads)); } #ifdef CONFIG_FSL_ESDHC @@ -154,9 +138,9 @@ int board_mmc_getcd(struct mmc *mmc) struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; int ret; - mxc_request_iomux(MX53_PIN_GPIO_1, IOMUX_CONFIG_ALT1); + imx_iomux_v3_setup_pad(MX53_PAD_GPIO_1__GPIO1_1); gpio_direction_input(IMX_GPIO_NR(1, 1)); - mxc_request_iomux(MX53_PIN_GPIO_4, IOMUX_CONFIG_ALT1); + imx_iomux_v3_setup_pad(MX53_PAD_GPIO_4__GPIO1_4); gpio_direction_input(IMX_GPIO_NR(1, 4)); if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR) @@ -167,8 +151,36 @@ int board_mmc_getcd(struct mmc *mmc) return ret; } +#define SD_CMD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \ + PAD_CTL_PUS_100K_UP) +#define SD_CLK_PAD_CTRL (PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_HIGH) +#define SD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | \ + PAD_CTL_DSE_HIGH) + int board_mmc_init(bd_t *bis) { + static const iomux_v3_cfg_t sd1_pads[] = { + NEW_PAD_CTRL(MX53_PAD_SD1_CMD__ESDHC1_CMD, SD_CMD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_SD1_CLK__ESDHC1_CLK, SD_CLK_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_SD1_DATA0__ESDHC1_DAT0, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_SD1_DATA1__ESDHC1_DAT1, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_SD1_DATA2__ESDHC1_DAT2, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_SD1_DATA3__ESDHC1_DAT3, SD_PAD_CTRL), + }; + + static const iomux_v3_cfg_t sd2_pads[] = { + NEW_PAD_CTRL(MX53_PAD_SD2_CMD__ESDHC2_CMD, SD_CMD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_SD2_CLK__ESDHC2_CLK, SD_CLK_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_SD2_DATA0__ESDHC2_DAT0, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_SD2_DATA1__ESDHC2_DAT1, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_SD2_DATA2__ESDHC2_DAT2, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_SD2_DATA3__ESDHC2_DAT3, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_PATA_DATA12__ESDHC2_DAT4, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_PATA_DATA13__ESDHC2_DAT5, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_PATA_DATA14__ESDHC2_DAT6, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_PATA_DATA15__ESDHC2_DAT7, SD_PAD_CTRL), + }; + u32 index; s32 status = 0; @@ -178,56 +190,12 @@ int board_mmc_init(bd_t *bis) for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) { switch (index) { case 0: - mxc_request_iomux(MX53_PIN_SD1_CMD, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_SD1_CLK, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_SD1_DATA0, - IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_SD1_DATA1, - IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_SD1_DATA2, - IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_SD1_DATA3, - IOMUX_CONFIG_ALT0); - - mxc_iomux_set_pad(MX53_PIN_SD1_CMD, 0x1E4); - mxc_iomux_set_pad(MX53_PIN_SD1_CLK, 0xD4); - mxc_iomux_set_pad(MX53_PIN_SD1_DATA0, 0x1D4); - mxc_iomux_set_pad(MX53_PIN_SD1_DATA1, 0x1D4); - mxc_iomux_set_pad(MX53_PIN_SD1_DATA2, 0x1D4); - mxc_iomux_set_pad(MX53_PIN_SD1_DATA3, 0x1D4); + imx_iomux_v3_setup_multiple_pads(sd1_pads, + ARRAY_SIZE(sd1_pads)); break; case 1: - mxc_request_iomux(MX53_PIN_SD2_CMD, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_request_iomux(MX53_PIN_SD2_CLK, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_request_iomux(MX53_PIN_SD2_DATA0, - IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_SD2_DATA1, - IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_SD2_DATA2, - IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_SD2_DATA3, - IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_ATA_DATA12, - IOMUX_CONFIG_ALT2); - mxc_request_iomux(MX53_PIN_ATA_DATA13, - IOMUX_CONFIG_ALT2); - mxc_request_iomux(MX53_PIN_ATA_DATA14, - IOMUX_CONFIG_ALT2); - mxc_request_iomux(MX53_PIN_ATA_DATA15, - IOMUX_CONFIG_ALT2); - - mxc_iomux_set_pad(MX53_PIN_SD2_CMD, 0x1E4); - mxc_iomux_set_pad(MX53_PIN_SD2_CLK, 0xD4); - mxc_iomux_set_pad(MX53_PIN_SD2_DATA0, 0x1D4); - mxc_iomux_set_pad(MX53_PIN_SD2_DATA1, 0x1D4); - mxc_iomux_set_pad(MX53_PIN_SD2_DATA2, 0x1D4); - mxc_iomux_set_pad(MX53_PIN_SD2_DATA3, 0x1D4); - mxc_iomux_set_pad(MX53_PIN_ATA_DATA12, 0x1D4); - mxc_iomux_set_pad(MX53_PIN_ATA_DATA13, 0x1D4); - mxc_iomux_set_pad(MX53_PIN_ATA_DATA14, 0x1D4); - mxc_iomux_set_pad(MX53_PIN_ATA_DATA15, 0x1D4); + imx_iomux_v3_setup_multiple_pads(sd2_pads, + ARRAY_SIZE(sd2_pads)); break; default: printf("Warning: you configured more ESDHC controller" @@ -244,85 +212,70 @@ int board_mmc_init(bd_t *bis) static void weim_smc911x_iomux(void) { + static const iomux_v3_cfg_t weim_smc911x_pads[] = { + /* Data bus */ + NEW_PAD_CTRL(MX53_PAD_EIM_D16__EMI_WEIM_D_16, + PAD_CTL_PKE | PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_EIM_D17__EMI_WEIM_D_17, + PAD_CTL_PKE | PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_EIM_D18__EMI_WEIM_D_18, + PAD_CTL_PKE | PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_EIM_D19__EMI_WEIM_D_19, + PAD_CTL_PKE | PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_EIM_D20__EMI_WEIM_D_20, + PAD_CTL_PKE | PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_EIM_D21__EMI_WEIM_D_21, + PAD_CTL_PKE | PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_EIM_D22__EMI_WEIM_D_22, + PAD_CTL_PKE | PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_EIM_D23__EMI_WEIM_D_23, + PAD_CTL_PKE | PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_EIM_D24__EMI_WEIM_D_24, + PAD_CTL_PKE | PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_EIM_D25__EMI_WEIM_D_25, + PAD_CTL_PKE | PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_EIM_D26__EMI_WEIM_D_26, + PAD_CTL_PKE | PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_EIM_D27__EMI_WEIM_D_27, + PAD_CTL_PKE | PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_EIM_D28__EMI_WEIM_D_28, + PAD_CTL_PKE | PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_EIM_D29__EMI_WEIM_D_29, + PAD_CTL_PKE | PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_EIM_D30__EMI_WEIM_D_30, + PAD_CTL_PKE | PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_EIM_D31__EMI_WEIM_D_31, + PAD_CTL_PKE | PAD_CTL_DSE_HIGH), + + /* Address lines */ + NEW_PAD_CTRL(MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0, + PAD_CTL_PKE | PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1, + PAD_CTL_PKE | PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2, + PAD_CTL_PKE | PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3, + PAD_CTL_PKE | PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4, + PAD_CTL_PKE | PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5, + PAD_CTL_PKE | PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6, + PAD_CTL_PKE | PAD_CTL_DSE_HIGH), + + /* other EIM signals for ethernet */ + MX53_PAD_EIM_OE__EMI_WEIM_OE, + MX53_PAD_EIM_RW__EMI_WEIM_RW, + MX53_PAD_EIM_CS1__EMI_WEIM_CS_1, + }; + /* ETHERNET_INT as GPIO2_31 */ - mxc_request_iomux(MX53_PIN_EIM_EB3, IOMUX_CONFIG_ALT1); + imx_iomux_v3_setup_pad(MX53_PAD_EIM_EB3__GPIO2_31); gpio_direction_input(ETHERNET_INT); - /* Data bus */ - mxc_request_iomux(MX53_PIN_EIM_D16, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_EIM_D16, 0xA4); - - mxc_request_iomux(MX53_PIN_EIM_D17, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_EIM_D17, 0xA4); - - mxc_request_iomux(MX53_PIN_EIM_D18, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_EIM_D18, 0xA4); - - mxc_request_iomux(MX53_PIN_EIM_D19, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_EIM_D19, 0xA4); - - mxc_request_iomux(MX53_PIN_EIM_D20, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_EIM_D20, 0xA4); - - mxc_request_iomux(MX53_PIN_EIM_D21, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_EIM_D21, 0xA4); - - mxc_request_iomux(MX53_PIN_EIM_D22, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_EIM_D22, 0xA4); - - mxc_request_iomux(MX53_PIN_EIM_D23, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_EIM_D23, 0xA4); - - mxc_request_iomux(MX53_PIN_EIM_D24, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_EIM_D24, 0xA4); - - mxc_request_iomux(MX53_PIN_EIM_D25, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_EIM_D25, 0xA4); - - mxc_request_iomux(MX53_PIN_EIM_D26, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_EIM_D26, 0xA4); - - mxc_request_iomux(MX53_PIN_EIM_D27, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_EIM_D27, 0xA4); - - mxc_request_iomux(MX53_PIN_EIM_D28, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_EIM_D28, 0xA4); - - mxc_request_iomux(MX53_PIN_EIM_D29, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_EIM_D29, 0xA4); - - mxc_request_iomux(MX53_PIN_EIM_D30, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_EIM_D30, 0xA4); - - mxc_request_iomux(MX53_PIN_EIM_D31, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_EIM_D31, 0xA4); - - /* Address lines */ - mxc_request_iomux(MX53_PIN_EIM_DA0, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_EIM_DA0, 0xA4); - - mxc_request_iomux(MX53_PIN_EIM_DA1, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_EIM_DA1, 0xA4); - - mxc_request_iomux(MX53_PIN_EIM_DA2, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_EIM_DA2, 0xA4); - - mxc_request_iomux(MX53_PIN_EIM_DA3, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_EIM_DA3, 0xA4); - - mxc_request_iomux(MX53_PIN_EIM_DA4, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_EIM_DA4, 0xA4); - - mxc_request_iomux(MX53_PIN_EIM_DA5, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_EIM_DA5, 0xA4); - - mxc_request_iomux(MX53_PIN_EIM_DA6, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_EIM_DA6, 0xA4); - - /* other EIM signals for ethernet */ - mxc_request_iomux(MX53_PIN_EIM_OE, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_EIM_RW, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_EIM_CS1, IOMUX_CONFIG_ALT0); + /* WEIM bus */ + imx_iomux_v3_setup_multiple_pads(weim_smc911x_pads, + ARRAY_SIZE(weim_smc911x_pads)); } static void weim_cs1_settings(void) diff --git a/board/freescale/mx53evk/mx53evk.c b/board/freescale/mx53evk/mx53evk.c index 1273501..727ad65 100644 --- a/board/freescale/mx53evk/mx53evk.c +++ b/board/freescale/mx53evk/mx53evk.c @@ -23,11 +23,10 @@ #include <common.h> #include <asm/io.h> #include <asm/arch/imx-regs.h> -#include <asm/arch/mx5x_pins.h> #include <asm/arch/sys_proto.h> #include <asm/arch/crm_regs.h> #include <asm/arch/clock.h> -#include <asm/arch/iomux.h> +#include <asm/arch/iomux-mx53.h> #include <asm/errno.h> #include <asm/imx-common/boot_mode.h> #include <netdev.h> @@ -49,69 +48,42 @@ int dram_init(void) return 0; } +#define UART_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_ODE) + static void setup_iomux_uart(void) { - /* UART1 RXD */ - mxc_request_iomux(MX53_PIN_CSI0_D11, IOMUX_CONFIG_ALT2); - mxc_iomux_set_pad(MX53_PIN_CSI0_D11, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU | - PAD_CTL_ODE_OPENDRAIN_ENABLE); - mxc_iomux_set_input(MX53_UART1_IPP_UART_RXD_MUX_SELECT_INPUT, 0x1); - - /* UART1 TXD */ - mxc_request_iomux(MX53_PIN_CSI0_D10, IOMUX_CONFIG_ALT2); - mxc_iomux_set_pad(MX53_PIN_CSI0_D10, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU | - PAD_CTL_ODE_OPENDRAIN_ENABLE); + static const iomux_v3_cfg_t uart_pads[] = { + NEW_PAD_CTRL(MX53_PAD_CSI0_DAT11__UART1_RXD_MUX, UART_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_CSI0_DAT10__UART1_TXD_MUX, UART_PAD_CTRL), + }; + + imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads)); } +#define I2C_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \ + PAD_CTL_HYS | PAD_CTL_ODE) + static void setup_i2c(unsigned int port_number) { + static const iomux_v3_cfg_t i2c1_pads[] = { + NEW_PAD_CTRL(MX53_PAD_CSI0_DAT8__I2C1_SDA, I2C_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_CSI0_DAT9__I2C1_SCL, I2C_PAD_CTRL), + }; + + static const iomux_v3_cfg_t i2c2_pads[] = { + NEW_PAD_CTRL(MX53_PAD_KEY_ROW3__I2C2_SDA, I2C_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_KEY_COL3__I2C2_SCL, I2C_PAD_CTRL), + }; + switch (port_number) { case 0: - /* i2c1 SDA */ - mxc_request_iomux(MX53_PIN_CSI0_D8, - IOMUX_CONFIG_ALT5 | IOMUX_CONFIG_SION); - mxc_iomux_set_input(MX53_I2C1_IPP_SDA_IN_SELECT_INPUT, - INPUT_CTL_PATH0); - mxc_iomux_set_pad(MX53_PIN_CSI0_D8, - PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH | - PAD_CTL_100K_PU | PAD_CTL_HYS_ENABLE | - PAD_CTL_ODE_OPENDRAIN_ENABLE); - /* i2c1 SCL */ - mxc_request_iomux(MX53_PIN_CSI0_D9, - IOMUX_CONFIG_ALT5 | IOMUX_CONFIG_SION); - mxc_iomux_set_input(MX53_I2C1_IPP_SCL_IN_SELECT_INPUT, - INPUT_CTL_PATH0); - mxc_iomux_set_pad(MX53_PIN_CSI0_D9, - PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH | - PAD_CTL_100K_PU | PAD_CTL_HYS_ENABLE | - PAD_CTL_ODE_OPENDRAIN_ENABLE); + imx_iomux_v3_setup_multiple_pads(i2c1_pads, + ARRAY_SIZE(i2c1_pads)); break; case 1: - /* i2c2 SDA */ - mxc_request_iomux(MX53_PIN_KEY_ROW3, - IOMUX_CONFIG_ALT4 | IOMUX_CONFIG_SION); - mxc_iomux_set_input(MX53_I2C2_IPP_SDA_IN_SELECT_INPUT, - INPUT_CTL_PATH0); - mxc_iomux_set_pad(MX53_PIN_KEY_ROW3, - PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH | - PAD_CTL_100K_PU | PAD_CTL_HYS_ENABLE | - PAD_CTL_ODE_OPENDRAIN_ENABLE); - - /* i2c2 SCL */ - mxc_request_iomux(MX53_PIN_KEY_COL3, - IOMUX_CONFIG_ALT4 | IOMUX_CONFIG_SION); - mxc_iomux_set_input(MX53_I2C2_IPP_SCL_IN_SELECT_INPUT, - INPUT_CTL_PATH0); - mxc_iomux_set_pad(MX53_PIN_KEY_COL3, - PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH | - PAD_CTL_100K_PU | PAD_CTL_HYS_ENABLE | - PAD_CTL_ODE_OPENDRAIN_ENABLE); + imx_iomux_v3_setup_multiple_pads(i2c2_pads, + ARRAY_SIZE(i2c2_pads)); break; default: printf("Warning: Wrong I2C port number\n"); @@ -160,54 +132,26 @@ void power_init(void) static void setup_iomux_fec(void) { - /*FEC_MDIO*/ - mxc_request_iomux(MX53_PIN_FEC_MDIO, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_MDIO, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_22K_PU | PAD_CTL_ODE_OPENDRAIN_ENABLE); - mxc_iomux_set_input(MX53_FEC_FEC_MDI_SELECT_INPUT, 0x1); - - /*FEC_MDC*/ - mxc_request_iomux(MX53_PIN_FEC_MDC, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_MDC, PAD_CTL_DRV_HIGH); - - /* FEC RXD1 */ - mxc_request_iomux(MX53_PIN_FEC_RXD1, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_RXD1, - PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE); - - /* FEC RXD0 */ - mxc_request_iomux(MX53_PIN_FEC_RXD0, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_RXD0, - PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE); - - /* FEC TXD1 */ - mxc_request_iomux(MX53_PIN_FEC_TXD1, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_TXD1, PAD_CTL_DRV_HIGH); - - /* FEC TXD0 */ - mxc_request_iomux(MX53_PIN_FEC_TXD0, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_TXD0, PAD_CTL_DRV_HIGH); - - /* FEC TX_EN */ - mxc_request_iomux(MX53_PIN_FEC_TX_EN, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_TX_EN, PAD_CTL_DRV_HIGH); - - /* FEC TX_CLK */ - mxc_request_iomux(MX53_PIN_FEC_REF_CLK, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_REF_CLK, - PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE); - - /* FEC RX_ER */ - mxc_request_iomux(MX53_PIN_FEC_RX_ER, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_RX_ER, - PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE); - - /* FEC CRS */ - mxc_request_iomux(MX53_PIN_FEC_CRS_DV, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_CRS_DV, - PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE); + static const iomux_v3_cfg_t fec_pads[] = { + NEW_PAD_CTRL(MX53_PAD_FEC_MDIO__FEC_MDIO, PAD_CTL_HYS | + PAD_CTL_DSE_HIGH | PAD_CTL_PUS_22K_UP | PAD_CTL_ODE), + NEW_PAD_CTRL(MX53_PAD_FEC_MDC__FEC_MDC, PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_FEC_RXD1__FEC_RDATA_1, + PAD_CTL_HYS | PAD_CTL_PKE), + NEW_PAD_CTRL(MX53_PAD_FEC_RXD0__FEC_RDATA_0, + PAD_CTL_HYS | PAD_CTL_PKE), + NEW_PAD_CTRL(MX53_PAD_FEC_TXD1__FEC_TDATA_1, PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_FEC_TXD0__FEC_TDATA_0, PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_FEC_TX_EN__FEC_TX_EN, PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_FEC_REF_CLK__FEC_TX_CLK, + PAD_CTL_HYS | PAD_CTL_PKE), + NEW_PAD_CTRL(MX53_PAD_FEC_RX_ER__FEC_RX_ER, + PAD_CTL_HYS | PAD_CTL_PKE), + NEW_PAD_CTRL(MX53_PAD_FEC_CRS_DV__FEC_RX_DV, + PAD_CTL_HYS | PAD_CTL_PKE), + }; + + imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads)); } #ifdef CONFIG_FSL_ESDHC @@ -221,9 +165,9 @@ int board_mmc_getcd(struct mmc *mmc) struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; int ret; - mxc_request_iomux(MX53_PIN_EIM_DA11, IOMUX_CONFIG_ALT1); + imx_iomux_v3_setup_pad(MX53_PAD_EIM_DA11__GPIO3_11); gpio_direction_input(IMX_GPIO_NR(3, 11)); - mxc_request_iomux(MX53_PIN_EIM_DA13, IOMUX_CONFIG_ALT1); + imx_iomux_v3_setup_pad(MX53_PAD_EIM_DA13__GPIO3_13); gpio_direction_input(IMX_GPIO_NR(3, 13)); if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR) @@ -234,8 +178,38 @@ int board_mmc_getcd(struct mmc *mmc) return ret; } +#define SD_CMD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \ + PAD_CTL_PUS_100K_UP) +#define SD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | \ + PAD_CTL_DSE_HIGH) + int board_mmc_init(bd_t *bis) { + static const iomux_v3_cfg_t sd1_pads[] = { + NEW_PAD_CTRL(MX53_PAD_SD1_CMD__ESDHC1_CMD, SD_CMD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_SD1_CLK__ESDHC1_CLK, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_SD1_DATA0__ESDHC1_DAT0, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_SD1_DATA1__ESDHC1_DAT1, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_SD1_DATA2__ESDHC1_DAT2, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_SD1_DATA3__ESDHC1_DAT3, SD_PAD_CTRL), + MX53_PAD_EIM_DA13__GPIO3_13, + }; + + static const iomux_v3_cfg_t sd2_pads[] = { + NEW_PAD_CTRL(MX53_PAD_PATA_RESET_B__ESDHC3_CMD, + SD_CMD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_PATA_IORDY__ESDHC3_CLK, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_PATA_DATA8__ESDHC3_DAT0, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_PATA_DATA9__ESDHC3_DAT1, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_PATA_DATA10__ESDHC3_DAT2, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_PATA_DATA11__ESDHC3_DAT3, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_PATA_DATA0__ESDHC3_DAT4, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_PATA_DATA1__ESDHC3_DAT5, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_PATA_DATA2__ESDHC3_DAT6, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_PATA_DATA3__ESDHC3_DAT7, SD_PAD_CTRL), + MX53_PAD_EIM_DA11__GPIO3_11, + }; + u32 index; s32 status = 0; @@ -245,109 +219,12 @@ int board_mmc_init(bd_t *bis) for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) { switch (index) { case 0: - mxc_request_iomux(MX53_PIN_SD1_CMD, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_SD1_CLK, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_SD1_DATA0, - IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_SD1_DATA1, - IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_SD1_DATA2, - IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_SD1_DATA3, - IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_EIM_DA13, - IOMUX_CONFIG_ALT1); - - mxc_iomux_set_pad(MX53_PIN_SD1_CMD, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU); - mxc_iomux_set_pad(MX53_PIN_SD1_CLK, - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | - PAD_CTL_DRV_HIGH); - mxc_iomux_set_pad(MX53_PIN_SD1_DATA0, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); - mxc_iomux_set_pad(MX53_PIN_SD1_DATA1, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); - mxc_iomux_set_pad(MX53_PIN_SD1_DATA2, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); - mxc_iomux_set_pad(MX53_PIN_SD1_DATA3, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); + imx_iomux_v3_setup_multiple_pads(sd1_pads, + ARRAY_SIZE(sd1_pads)); break; case 1: - mxc_request_iomux(MX53_PIN_ATA_RESET_B, - IOMUX_CONFIG_ALT2); - mxc_request_iomux(MX53_PIN_ATA_IORDY, - IOMUX_CONFIG_ALT2); - mxc_request_iomux(MX53_PIN_ATA_DATA8, - IOMUX_CONFIG_ALT4); - mxc_request_iomux(MX53_PIN_ATA_DATA9, - IOMUX_CONFIG_ALT4); - mxc_request_iomux(MX53_PIN_ATA_DATA10, - IOMUX_CONFIG_ALT4); - mxc_request_iomux(MX53_PIN_ATA_DATA11, - IOMUX_CONFIG_ALT4); - mxc_request_iomux(MX53_PIN_ATA_DATA0, - IOMUX_CONFIG_ALT4); - mxc_request_iomux(MX53_PIN_ATA_DATA1, - IOMUX_CONFIG_ALT4); - mxc_request_iomux(MX53_PIN_ATA_DATA2, - IOMUX_CONFIG_ALT4); - mxc_request_iomux(MX53_PIN_ATA_DATA3, - IOMUX_CONFIG_ALT4); - mxc_request_iomux(MX53_PIN_EIM_DA11, - IOMUX_CONFIG_ALT1); - - mxc_iomux_set_pad(MX53_PIN_ATA_RESET_B, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU); - mxc_iomux_set_pad(MX53_PIN_ATA_IORDY, - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | - PAD_CTL_DRV_HIGH); - mxc_iomux_set_pad(MX53_PIN_ATA_DATA8, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); - mxc_iomux_set_pad(MX53_PIN_ATA_DATA9, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); - mxc_iomux_set_pad(MX53_PIN_ATA_DATA10, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); - mxc_iomux_set_pad(MX53_PIN_ATA_DATA11, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); - mxc_iomux_set_pad(MX53_PIN_ATA_DATA0, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); - mxc_iomux_set_pad(MX53_PIN_ATA_DATA1, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); - mxc_iomux_set_pad(MX53_PIN_ATA_DATA2, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); - mxc_iomux_set_pad(MX53_PIN_ATA_DATA3, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); - + imx_iomux_v3_setup_multiple_pads(sd2_pads, + ARRAY_SIZE(sd2_pads)); break; default: printf("Warning: you configured more ESDHC controller" diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c index 8f39c38..10e9d36 100644 --- a/board/freescale/mx53loco/mx53loco.c +++ b/board/freescale/mx53loco/mx53loco.c @@ -24,11 +24,10 @@ #include <common.h> #include <asm/io.h> #include <asm/arch/imx-regs.h> -#include <asm/arch/mx5x_pins.h> #include <asm/arch/sys_proto.h> #include <asm/arch/crm_regs.h> #include <asm/arch/clock.h> -#include <asm/arch/iomux.h> +#include <asm/arch/iomux-mx53.h> #include <asm/arch/clock.h> #include <asm/errno.h> #include <asm/imx-common/mx5_video.h> @@ -82,86 +81,51 @@ u32 get_board_rev(void) return (get_cpu_rev() & ~(0xF << 8)) | (rev & 0xF) << 8; } +#define UART_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_ODE) + static void setup_iomux_uart(void) { - /* UART1 RXD */ - mxc_request_iomux(MX53_PIN_CSI0_D11, IOMUX_CONFIG_ALT2); - mxc_iomux_set_pad(MX53_PIN_CSI0_D11, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU | - PAD_CTL_ODE_OPENDRAIN_ENABLE); - mxc_iomux_set_input(MX53_UART1_IPP_UART_RXD_MUX_SELECT_INPUT, 0x1); - - /* UART1 TXD */ - mxc_request_iomux(MX53_PIN_CSI0_D10, IOMUX_CONFIG_ALT2); - mxc_iomux_set_pad(MX53_PIN_CSI0_D10, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU | - PAD_CTL_ODE_OPENDRAIN_ENABLE); + static const iomux_v3_cfg_t uart_pads[] = { + NEW_PAD_CTRL(MX53_PAD_CSI0_DAT11__UART1_RXD_MUX, UART_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_CSI0_DAT10__UART1_TXD_MUX, UART_PAD_CTRL), + }; + + imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads)); } #ifdef CONFIG_USB_EHCI_MX5 int board_ehci_hcd_init(int port) { /* request VBUS power enable pin, GPIO7_8 */ - mxc_request_iomux(MX53_PIN_ATA_DA_2, IOMUX_CONFIG_ALT1); - gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_ATA_DA_2), 1); + imx_iomux_v3_setup_pad(MX53_PAD_PATA_DA_2__GPIO7_8); + gpio_direction_output(IMX_GPIO_NR(7, 8), 1); return 0; } #endif static void setup_iomux_fec(void) { - /*FEC_MDIO*/ - mxc_request_iomux(MX53_PIN_FEC_MDIO, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_MDIO, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_22K_PU | PAD_CTL_ODE_OPENDRAIN_ENABLE); - mxc_iomux_set_input(MX53_FEC_FEC_MDI_SELECT_INPUT, 0x1); - - /*FEC_MDC*/ - mxc_request_iomux(MX53_PIN_FEC_MDC, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_MDC, PAD_CTL_DRV_HIGH); - - /* FEC RXD1 */ - mxc_request_iomux(MX53_PIN_FEC_RXD1, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_RXD1, - PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE); - - /* FEC RXD0 */ - mxc_request_iomux(MX53_PIN_FEC_RXD0, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_RXD0, - PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE); - - /* FEC TXD1 */ - mxc_request_iomux(MX53_PIN_FEC_TXD1, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_TXD1, PAD_CTL_DRV_HIGH); - - /* FEC TXD0 */ - mxc_request_iomux(MX53_PIN_FEC_TXD0, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_TXD0, PAD_CTL_DRV_HIGH); - - /* FEC TX_EN */ - mxc_request_iomux(MX53_PIN_FEC_TX_EN, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_TX_EN, PAD_CTL_DRV_HIGH); - - /* FEC TX_CLK */ - mxc_request_iomux(MX53_PIN_FEC_REF_CLK, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_REF_CLK, - PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE); - - /* FEC RX_ER */ - mxc_request_iomux(MX53_PIN_FEC_RX_ER, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_RX_ER, - PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE); - - /* FEC CRS */ - mxc_request_iomux(MX53_PIN_FEC_CRS_DV, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_CRS_DV, - PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE); + static const iomux_v3_cfg_t fec_pads[] = { + NEW_PAD_CTRL(MX53_PAD_FEC_MDIO__FEC_MDIO, PAD_CTL_HYS | + PAD_CTL_DSE_HIGH | PAD_CTL_PUS_22K_UP | PAD_CTL_ODE), + NEW_PAD_CTRL(MX53_PAD_FEC_MDC__FEC_MDC, PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_FEC_RXD1__FEC_RDATA_1, + PAD_CTL_HYS | PAD_CTL_PKE), + NEW_PAD_CTRL(MX53_PAD_FEC_RXD0__FEC_RDATA_0, + PAD_CTL_HYS | PAD_CTL_PKE), + NEW_PAD_CTRL(MX53_PAD_FEC_TXD1__FEC_TDATA_1, PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_FEC_TXD0__FEC_TDATA_0, PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_FEC_TX_EN__FEC_TX_EN, PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_FEC_REF_CLK__FEC_TX_CLK, + PAD_CTL_HYS | PAD_CTL_PKE), + NEW_PAD_CTRL(MX53_PAD_FEC_RX_ER__FEC_RX_ER, + PAD_CTL_HYS | PAD_CTL_PKE), + NEW_PAD_CTRL(MX53_PAD_FEC_CRS_DV__FEC_RX_DV, + PAD_CTL_HYS | PAD_CTL_PKE), + }; + + imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads)); } #ifdef CONFIG_FSL_ESDHC @@ -175,9 +139,9 @@ int board_mmc_getcd(struct mmc *mmc) struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; int ret; - mxc_request_iomux(MX53_PIN_EIM_DA11, IOMUX_CONFIG_ALT1); + imx_iomux_v3_setup_pad(MX53_PAD_EIM_DA11__GPIO3_11); gpio_direction_input(IMX_GPIO_NR(3, 11)); - mxc_request_iomux(MX53_PIN_EIM_DA13, IOMUX_CONFIG_ALT1); + imx_iomux_v3_setup_pad(MX53_PAD_EIM_DA13__GPIO3_13); gpio_direction_input(IMX_GPIO_NR(3, 13)); if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR) @@ -188,8 +152,38 @@ int board_mmc_getcd(struct mmc *mmc) return ret; } +#define SD_CMD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \ + PAD_CTL_PUS_100K_UP) +#define SD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | \ + PAD_CTL_DSE_HIGH) + int board_mmc_init(bd_t *bis) { + static const iomux_v3_cfg_t sd1_pads[] = { + NEW_PAD_CTRL(MX53_PAD_SD1_CMD__ESDHC1_CMD, SD_CMD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_SD1_CLK__ESDHC1_CLK, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_SD1_DATA0__ESDHC1_DAT0, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_SD1_DATA1__ESDHC1_DAT1, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_SD1_DATA2__ESDHC1_DAT2, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_SD1_DATA3__ESDHC1_DAT3, SD_PAD_CTRL), + MX53_PAD_EIM_DA13__GPIO3_13, + }; + + static const iomux_v3_cfg_t sd2_pads[] = { + NEW_PAD_CTRL(MX53_PAD_PATA_RESET_B__ESDHC3_CMD, + SD_CMD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_PATA_IORDY__ESDHC3_CLK, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_PATA_DATA8__ESDHC3_DAT0, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_PATA_DATA9__ESDHC3_DAT1, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_PATA_DATA10__ESDHC3_DAT2, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_PATA_DATA11__ESDHC3_DAT3, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_PATA_DATA0__ESDHC3_DAT4, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_PATA_DATA1__ESDHC3_DAT5, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_PATA_DATA2__ESDHC3_DAT6, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_PATA_DATA3__ESDHC3_DAT7, SD_PAD_CTRL), + MX53_PAD_EIM_DA11__GPIO3_11, + }; + u32 index; s32 status = 0; @@ -199,109 +193,12 @@ int board_mmc_init(bd_t *bis) for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) { switch (index) { case 0: - mxc_request_iomux(MX53_PIN_SD1_CMD, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_SD1_CLK, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_SD1_DATA0, - IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_SD1_DATA1, - IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_SD1_DATA2, - IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_SD1_DATA3, - IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_EIM_DA13, - IOMUX_CONFIG_ALT1); - - mxc_iomux_set_pad(MX53_PIN_SD1_CMD, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU); - mxc_iomux_set_pad(MX53_PIN_SD1_CLK, - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | - PAD_CTL_DRV_HIGH); - mxc_iomux_set_pad(MX53_PIN_SD1_DATA0, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); - mxc_iomux_set_pad(MX53_PIN_SD1_DATA1, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); - mxc_iomux_set_pad(MX53_PIN_SD1_DATA2, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); - mxc_iomux_set_pad(MX53_PIN_SD1_DATA3, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); + imx_iomux_v3_setup_multiple_pads(sd1_pads, + ARRAY_SIZE(sd1_pads)); break; case 1: - mxc_request_iomux(MX53_PIN_ATA_RESET_B, - IOMUX_CONFIG_ALT2); - mxc_request_iomux(MX53_PIN_ATA_IORDY, - IOMUX_CONFIG_ALT2); - mxc_request_iomux(MX53_PIN_ATA_DATA8, - IOMUX_CONFIG_ALT4); - mxc_request_iomux(MX53_PIN_ATA_DATA9, - IOMUX_CONFIG_ALT4); - mxc_request_iomux(MX53_PIN_ATA_DATA10, - IOMUX_CONFIG_ALT4); - mxc_request_iomux(MX53_PIN_ATA_DATA11, - IOMUX_CONFIG_ALT4); - mxc_request_iomux(MX53_PIN_ATA_DATA0, - IOMUX_CONFIG_ALT4); - mxc_request_iomux(MX53_PIN_ATA_DATA1, - IOMUX_CONFIG_ALT4); - mxc_request_iomux(MX53_PIN_ATA_DATA2, - IOMUX_CONFIG_ALT4); - mxc_request_iomux(MX53_PIN_ATA_DATA3, - IOMUX_CONFIG_ALT4); - mxc_request_iomux(MX53_PIN_EIM_DA11, - IOMUX_CONFIG_ALT1); - - mxc_iomux_set_pad(MX53_PIN_ATA_RESET_B, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU); - mxc_iomux_set_pad(MX53_PIN_ATA_IORDY, - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | - PAD_CTL_DRV_HIGH); - mxc_iomux_set_pad(MX53_PIN_ATA_DATA8, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); - mxc_iomux_set_pad(MX53_PIN_ATA_DATA9, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); - mxc_iomux_set_pad(MX53_PIN_ATA_DATA10, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); - mxc_iomux_set_pad(MX53_PIN_ATA_DATA11, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); - mxc_iomux_set_pad(MX53_PIN_ATA_DATA0, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); - mxc_iomux_set_pad(MX53_PIN_ATA_DATA1, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); - mxc_iomux_set_pad(MX53_PIN_ATA_DATA2, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); - mxc_iomux_set_pad(MX53_PIN_ATA_DATA3, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); - + imx_iomux_v3_setup_multiple_pads(sd2_pads, + ARRAY_SIZE(sd2_pads)); break; default: printf("Warning: you configured more ESDHC controller" @@ -316,28 +213,17 @@ int board_mmc_init(bd_t *bis) } #endif +#define I2C_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_ODE) + static void setup_iomux_i2c(void) { - /* I2C1 SDA */ - mxc_request_iomux(MX53_PIN_CSI0_D8, - IOMUX_CONFIG_ALT5 | IOMUX_CONFIG_SION); - mxc_iomux_set_input(MX53_I2C1_IPP_SDA_IN_SELECT_INPUT, - INPUT_CTL_PATH0); - mxc_iomux_set_pad(MX53_PIN_CSI0_D8, - PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH | - PAD_CTL_100K_PU | PAD_CTL_PKE_ENABLE | - PAD_CTL_PUE_PULL | - PAD_CTL_ODE_OPENDRAIN_ENABLE); - /* I2C1 SCL */ - mxc_request_iomux(MX53_PIN_CSI0_D9, - IOMUX_CONFIG_ALT5 | IOMUX_CONFIG_SION); - mxc_iomux_set_input(MX53_I2C1_IPP_SCL_IN_SELECT_INPUT, - INPUT_CTL_PATH0); - mxc_iomux_set_pad(MX53_PIN_CSI0_D9, - PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH | - PAD_CTL_100K_PU | PAD_CTL_PKE_ENABLE | - PAD_CTL_PUE_PULL | - PAD_CTL_ODE_OPENDRAIN_ENABLE); + static const iomux_v3_cfg_t i2c1_pads[] = { + NEW_PAD_CTRL(MX53_PAD_CSI0_DAT8__I2C1_SDA, I2C_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_CSI0_DAT9__I2C1_SCL, I2C_PAD_CTRL), + }; + + imx_iomux_v3_setup_multiple_pads(i2c1_pads, ARRAY_SIZE(i2c1_pads)); } static int power_init(void) diff --git a/board/freescale/mx53loco/mx53loco_video.c b/board/freescale/mx53loco/mx53loco_video.c index a4d5a6a..c4654c9 100644 --- a/board/freescale/mx53loco/mx53loco_video.c +++ b/board/freescale/mx53loco/mx53loco_video.c @@ -24,7 +24,7 @@ #include <common.h> #include <linux/list.h> #include <asm/gpio.h> -#include <asm/arch/iomux.h> +#include <asm/arch/iomux-mx53.h> #include <linux/fb.h> #include <ipu_pixfmt.h> @@ -63,42 +63,46 @@ static struct fb_videomode const seiko_wvga = { void setup_iomux_lcd(void) { - mxc_request_iomux(MX53_PIN_DI0_DISP_CLK, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DI0_PIN15, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DI0_PIN2, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DI0_PIN3, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DISP0_DAT0, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DISP0_DAT1, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DISP0_DAT2, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DISP0_DAT3, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DISP0_DAT4, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DISP0_DAT5, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DISP0_DAT6, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DISP0_DAT7, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DISP0_DAT8, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DISP0_DAT9, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DISP0_DAT10, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DISP0_DAT11, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DISP0_DAT12, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DISP0_DAT13, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DISP0_DAT14, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DISP0_DAT15, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DISP0_DAT16, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DISP0_DAT17, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DISP0_DAT18, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DISP0_DAT19, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DISP0_DAT20, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DISP0_DAT21, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DISP0_DAT22, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_DISP0_DAT23, IOMUX_CONFIG_ALT0); + static const iomux_v3_cfg_t lcd_pads[] = { + MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK, + MX53_PAD_DI0_PIN15__IPU_DI0_PIN15, + MX53_PAD_DI0_PIN2__IPU_DI0_PIN2, + MX53_PAD_DI0_PIN3__IPU_DI0_PIN3, + MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0, + MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1, + MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2, + MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3, + MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4, + MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5, + MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6, + MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7, + MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8, + MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9, + MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10, + MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11, + MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12, + MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13, + MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14, + MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15, + MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16, + MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17, + MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18, + MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19, + MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20, + MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21, + MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22, + MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23, + }; + + imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads)); /* Turn on GPIO backlight */ - mxc_request_iomux(MX53_PIN_EIM_D24, IOMUX_CONFIG_ALT1); + imx_iomux_v3_setup_pad(MX53_PAD_EIM_D24__GPIO3_24); gpio_direction_output(MX53LOCO_LCD_POWER, 1); /* Turn on display contrast */ - mxc_request_iomux(MX53_PIN_GPIO_1, IOMUX_CONFIG_ALT1); - gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_GPIO_1), 1); + imx_iomux_v3_setup_pad(MX53_PAD_GPIO_1__GPIO1_1); + gpio_direction_output(IMX_GPIO_NR(1, 1), 1); } int board_video_skip(void) diff --git a/board/freescale/mx53smd/mx53smd.c b/board/freescale/mx53smd/mx53smd.c index 761f727..d04f44f 100644 --- a/board/freescale/mx53smd/mx53smd.c +++ b/board/freescale/mx53smd/mx53smd.c @@ -23,11 +23,10 @@ #include <common.h> #include <asm/io.h> #include <asm/arch/imx-regs.h> -#include <asm/arch/mx5x_pins.h> #include <asm/arch/sys_proto.h> #include <asm/arch/crm_regs.h> #include <asm/arch/clock.h> -#include <asm/arch/iomux.h> +#include <asm/arch/iomux-mx53.h> #include <asm/errno.h> #include <netdev.h> #include <mmc.h> @@ -56,76 +55,41 @@ void dram_init_banksize(void) gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; } +#define UART_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_ODE) + static void setup_iomux_uart(void) { - /* UART1 RXD */ - mxc_request_iomux(MX53_PIN_CSI0_D11, IOMUX_CONFIG_ALT2); - mxc_iomux_set_pad(MX53_PIN_CSI0_D11, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU | - PAD_CTL_ODE_OPENDRAIN_ENABLE); - mxc_iomux_set_input(MX53_UART1_IPP_UART_RXD_MUX_SELECT_INPUT, 0x1); - - /* UART1 TXD */ - mxc_request_iomux(MX53_PIN_CSI0_D10, IOMUX_CONFIG_ALT2); - mxc_iomux_set_pad(MX53_PIN_CSI0_D10, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU | - PAD_CTL_ODE_OPENDRAIN_ENABLE); + static const iomux_v3_cfg_t uart_pads[] = { + NEW_PAD_CTRL(MX53_PAD_CSI0_DAT11__UART1_RXD_MUX, UART_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_CSI0_DAT10__UART1_TXD_MUX, UART_PAD_CTRL), + }; + + imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads)); } static void setup_iomux_fec(void) { - /*FEC_MDIO*/ - mxc_request_iomux(MX53_PIN_FEC_MDIO, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_MDIO, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_22K_PU | PAD_CTL_ODE_OPENDRAIN_ENABLE); - mxc_iomux_set_input(MX53_FEC_FEC_MDI_SELECT_INPUT, 0x1); - - /*FEC_MDC*/ - mxc_request_iomux(MX53_PIN_FEC_MDC, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_MDC, PAD_CTL_DRV_HIGH); - - /* FEC RXD1 */ - mxc_request_iomux(MX53_PIN_FEC_RXD1, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_RXD1, - PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE); - - /* FEC RXD0 */ - mxc_request_iomux(MX53_PIN_FEC_RXD0, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_RXD0, - PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE); - - /* FEC TXD1 */ - mxc_request_iomux(MX53_PIN_FEC_TXD1, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_TXD1, PAD_CTL_DRV_HIGH); - - /* FEC TXD0 */ - mxc_request_iomux(MX53_PIN_FEC_TXD0, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_TXD0, PAD_CTL_DRV_HIGH); - - /* FEC TX_EN */ - mxc_request_iomux(MX53_PIN_FEC_TX_EN, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_TX_EN, PAD_CTL_DRV_HIGH); - - /* FEC TX_CLK */ - mxc_request_iomux(MX53_PIN_FEC_REF_CLK, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_REF_CLK, - PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE); - - /* FEC RX_ER */ - mxc_request_iomux(MX53_PIN_FEC_RX_ER, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_RX_ER, - PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE); - - /* FEC CRS */ - mxc_request_iomux(MX53_PIN_FEC_CRS_DV, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX53_PIN_FEC_CRS_DV, - PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE); + static const iomux_v3_cfg_t fec_pads[] = { + NEW_PAD_CTRL(MX53_PAD_FEC_MDIO__FEC_MDIO, PAD_CTL_HYS | + PAD_CTL_DSE_HIGH | PAD_CTL_PUS_22K_UP | PAD_CTL_ODE), + NEW_PAD_CTRL(MX53_PAD_FEC_MDC__FEC_MDC, PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_FEC_RXD1__FEC_RDATA_1, + PAD_CTL_HYS | PAD_CTL_PKE), + NEW_PAD_CTRL(MX53_PAD_FEC_RXD0__FEC_RDATA_0, + PAD_CTL_HYS | PAD_CTL_PKE), + NEW_PAD_CTRL(MX53_PAD_FEC_TXD1__FEC_TDATA_1, PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_FEC_TXD0__FEC_TDATA_0, PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_FEC_TX_EN__FEC_TX_EN, PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX53_PAD_FEC_REF_CLK__FEC_TX_CLK, + PAD_CTL_HYS | PAD_CTL_PKE), + NEW_PAD_CTRL(MX53_PAD_FEC_RX_ER__FEC_RX_ER, + PAD_CTL_HYS | PAD_CTL_PKE), + NEW_PAD_CTRL(MX53_PAD_FEC_CRS_DV__FEC_RX_DV, + PAD_CTL_HYS | PAD_CTL_PKE), + }; + + imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads)); } #ifdef CONFIG_FSL_ESDHC @@ -135,13 +99,28 @@ struct fsl_esdhc_cfg esdhc_cfg[1] = { int board_mmc_getcd(struct mmc *mmc) { - mxc_request_iomux(MX53_PIN_EIM_DA13, IOMUX_CONFIG_ALT1); + imx_iomux_v3_setup_pad(MX53_PAD_EIM_DA13__GPIO3_13); gpio_direction_input(IMX_GPIO_NR(3, 13)); return !gpio_get_value(IMX_GPIO_NR(3, 13)); } +#define SD_CMD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \ + PAD_CTL_PUS_100K_UP) +#define SD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | \ + PAD_CTL_DSE_HIGH) + int board_mmc_init(bd_t *bis) { + static const iomux_v3_cfg_t sd1_pads[] = { + NEW_PAD_CTRL(MX53_PAD_SD1_CMD__ESDHC1_CMD, SD_CMD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_SD1_CLK__ESDHC1_CLK, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_SD1_DATA0__ESDHC1_DAT0, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_SD1_DATA1__ESDHC1_DAT1, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_SD1_DATA2__ESDHC1_DAT2, SD_PAD_CTRL), + NEW_PAD_CTRL(MX53_PAD_SD1_DATA3__ESDHC1_DAT3, SD_PAD_CTRL), + MX53_PAD_EIM_DA13__GPIO3_13, + }; + u32 index; s32 status = 0; @@ -150,43 +129,8 @@ int board_mmc_init(bd_t *bis) for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM; index++) { switch (index) { case 0: - mxc_request_iomux(MX53_PIN_SD1_CMD, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_SD1_CLK, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_SD1_DATA0, - IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_SD1_DATA1, - IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_SD1_DATA2, - IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_SD1_DATA3, - IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX53_PIN_EIM_DA13, - IOMUX_CONFIG_ALT1); - - mxc_iomux_set_pad(MX53_PIN_SD1_CMD, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU); - mxc_iomux_set_pad(MX53_PIN_SD1_CLK, - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | - PAD_CTL_DRV_HIGH); - mxc_iomux_set_pad(MX53_PIN_SD1_DATA0, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); - mxc_iomux_set_pad(MX53_PIN_SD1_DATA1, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); - mxc_iomux_set_pad(MX53_PIN_SD1_DATA2, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); - mxc_iomux_set_pad(MX53_PIN_SD1_DATA3, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | - PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU); + imx_iomux_v3_setup_multiple_pads(sd1_pads, + ARRAY_SIZE(sd1_pads)); break; default: diff --git a/board/freescale/mx6qarm2/mx6qarm2.c b/board/freescale/mx6qarm2/mx6qarm2.c index ff7f5e8..e336746 100644 --- a/board/freescale/mx6qarm2/mx6qarm2.c +++ b/board/freescale/mx6qarm2/mx6qarm2.c @@ -35,17 +35,16 @@ DECLARE_GLOBAL_DATA_PTR; -#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ - PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) +#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ + PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \ + PAD_CTL_SRE_FAST | PAD_CTL_HYS) -#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \ - PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) +#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \ + PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \ + PAD_CTL_SRE_FAST | PAD_CTL_HYS) -#define ENET_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ - PAD_CTL_DSE_40ohm | PAD_CTL_HYS) +#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ + PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS) int dram_init(void) { diff --git a/board/freescale/mx6qsabreauto/mx6qsabreauto.c b/board/freescale/mx6qsabreauto/mx6qsabreauto.c index aec3286..bfe4868 100644 --- a/board/freescale/mx6qsabreauto/mx6qsabreauto.c +++ b/board/freescale/mx6qsabreauto/mx6qsabreauto.c @@ -35,17 +35,16 @@ DECLARE_GLOBAL_DATA_PTR; -#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ - PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) +#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ + PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \ + PAD_CTL_SRE_FAST | PAD_CTL_HYS) -#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \ - PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) +#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \ + PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \ + PAD_CTL_SRE_FAST | PAD_CTL_HYS) -#define ENET_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ - PAD_CTL_DSE_40ohm | PAD_CTL_HYS) +#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ + PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS) int dram_init(void) { @@ -179,7 +178,10 @@ static int mx6sabre_rev(void) * i.MX6Q ARD RevB: 0x02 */ struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR; - int reg = readl(&ocotp->gp1); + struct fuse_bank *bank = &ocotp->bank[4]; + struct fuse_bank4_regs *fuse = + (struct fuse_bank4_regs *)bank->fuse_regs; + int reg = readl(&fuse->gp1); int ret; switch (reg >> 8 & 0x0F) { diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c b/board/freescale/mx6qsabrelite/mx6qsabrelite.c index 9f9cac8..8ce054e 100644 --- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c +++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c @@ -45,29 +45,25 @@ DECLARE_GLOBAL_DATA_PTR; -#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ - PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) +#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ + PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \ + PAD_CTL_SRE_FAST | PAD_CTL_HYS) -#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \ - PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) +#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \ + PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \ + PAD_CTL_SRE_FAST | PAD_CTL_HYS) -#define ENET_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ - PAD_CTL_DSE_40ohm | PAD_CTL_HYS) +#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ + PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS) -#define SPI_PAD_CTRL (PAD_CTL_HYS | \ - PAD_CTL_PUS_100K_DOWN | PAD_CTL_SPEED_MED | \ +#define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \ PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST) -#define BUTTON_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ - PAD_CTL_DSE_40ohm | PAD_CTL_HYS) +#define BUTTON_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ + PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS) -#define I2C_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ - PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ +#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ + PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ PAD_CTL_ODE | PAD_CTL_SRE_FAST) int dram_init(void) diff --git a/board/freescale/mx6qsabresd/mx6qsabresd.c b/board/freescale/mx6qsabresd/mx6qsabresd.c index 0d7cb9e..2529826 100644 --- a/board/freescale/mx6qsabresd/mx6qsabresd.c +++ b/board/freescale/mx6qsabresd/mx6qsabresd.c @@ -34,17 +34,16 @@ DECLARE_GLOBAL_DATA_PTR; -#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ - PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) +#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ + PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \ + PAD_CTL_SRE_FAST | PAD_CTL_HYS) -#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \ - PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) +#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \ + PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \ + PAD_CTL_SRE_FAST | PAD_CTL_HYS) -#define ENET_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ - PAD_CTL_DSE_40ohm | PAD_CTL_HYS) +#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ + PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS) int dram_init(void) { @@ -166,6 +165,7 @@ int board_mmc_getcd(struct mmc *mmc) int board_mmc_init(bd_t *bis) { + s32 status = 0; int i; /* @@ -196,15 +196,15 @@ int board_mmc_init(bd_t *bis) break; default: printf("Warning: you configured more USDHC controllers" - "(%d) than supported by the board\n", i + 1); - return 0; - } + "(%d) then supported by the board (%d)\n", + i + 1, CONFIG_SYS_FSL_USDHC_NUM); + return status; + } - if (fsl_esdhc_initialize(bis, &usdhc_cfg[i])) - printf("Warning: failed to initialize mmc dev %d\n", i); + status |= fsl_esdhc_initialize(bis, &usdhc_cfg[i]); } - return 0; + return status; } #endif diff --git a/board/freescale/mx6slevk/Makefile b/board/freescale/mx6slevk/Makefile new file mode 100644 index 0000000..43af351 --- /dev/null +++ b/board/freescale/mx6slevk/Makefile @@ -0,0 +1,28 @@ +# (C) Copyright 2013 Freescale Semiconductor, Inc. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS := mx6slevk.o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/mx6slevk/imximage.cfg b/board/freescale/mx6slevk/imximage.cfg new file mode 100644 index 0000000..df39a16 --- /dev/null +++ b/board/freescale/mx6slevk/imximage.cfg @@ -0,0 +1,118 @@ +/* + * Copyright (C) 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ + +/* image version */ + +IMAGE_VERSION 2 + +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ + +BOOT_FROM sd + +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ +DATA 4 0x020c4018 0x00260324 + +DATA 4 0x020c4068 0xffffffff +DATA 4 0x020c406c 0xffffffff +DATA 4 0x020c4070 0xffffffff +DATA 4 0x020c4074 0xffffffff +DATA 4 0x020c4078 0xffffffff +DATA 4 0x020c407c 0xffffffff +DATA 4 0x020c4080 0xffffffff + +DATA 4 0x020e0344 0x00003030 +DATA 4 0x020e0348 0x00003030 +DATA 4 0x020e034c 0x00003030 +DATA 4 0x020e0350 0x00003030 +DATA 4 0x020e030c 0x00000030 +DATA 4 0x020e0310 0x00000030 +DATA 4 0x020e0314 0x00000030 +DATA 4 0x020e0318 0x00000030 +DATA 4 0x020e0300 0x00000030 +DATA 4 0x020e031c 0x00000030 +DATA 4 0x020e0338 0x00000028 +DATA 4 0x020e0320 0x00000030 +DATA 4 0x020e032c 0x00000000 +DATA 4 0x020e033c 0x00000008 +DATA 4 0x020e0340 0x00000008 +DATA 4 0x020e05c4 0x00000030 +DATA 4 0x020e05cc 0x00000030 +DATA 4 0x020e05d4 0x00000030 +DATA 4 0x020e05d8 0x00000030 +DATA 4 0x020e05ac 0x00000030 +DATA 4 0x020e05c8 0x00000030 +DATA 4 0x020e05b0 0x00020000 +DATA 4 0x020e05b4 0x00000000 +DATA 4 0x020e05c0 0x00020000 +DATA 4 0x020e05d0 0x00080000 + +DATA 4 0x021b001c 0x00008000 +DATA 4 0x021b085c 0x1b4700c7 +DATA 4 0x021b0800 0xa1390003 +DATA 4 0x021b0890 0x00300000 +DATA 4 0x021b08b8 0x00000800 +DATA 4 0x021b081c 0x33333333 +DATA 4 0x021b0820 0x33333333 +DATA 4 0x021b0824 0x33333333 +DATA 4 0x021b0828 0x33333333 +DATA 4 0x021b082c 0xf3333333 +DATA 4 0x021b0830 0xf3333333 +DATA 4 0x021b0834 0xf3333333 +DATA 4 0x021b0838 0xf3333333 +DATA 4 0x021b0848 0x4241444a +DATA 4 0x021b0850 0x3030312b +DATA 4 0x021b083c 0x20000000 +DATA 4 0x021b0840 0x00000000 +DATA 4 0x021b08c0 0x24911492 +DATA 4 0x021b08b8 0x00000800 +DATA 4 0x021b000c 0x33374133 +DATA 4 0x021b0004 0x00020024 +DATA 4 0x021b0010 0x00100A82 +DATA 4 0x021b0014 0x00000093 +DATA 4 0x021b0018 0x00001688 +DATA 4 0x021b002c 0x0f9f26d2 +DATA 4 0x021b0030 0x0000020e +DATA 4 0x021b0038 0x00190778 +DATA 4 0x021b0008 0x00000000 +DATA 4 0x021b0040 0x0000004f +DATA 4 0x021b0000 0xc3110000 +DATA 4 0x021b001c 0x003f8030 +DATA 4 0x021b001c 0xff0a8030 +DATA 4 0x021b001c 0x82018030 +DATA 4 0x021b001c 0x04028030 +DATA 4 0x021b001c 0x02038030 +DATA 4 0x021b001c 0xff0a8038 +DATA 4 0x021b001c 0x82018038 +DATA 4 0x021b001c 0x04028038 +DATA 4 0x021b001c 0x02038038 +DATA 4 0x021b0800 0xa1310003 +DATA 4 0x021b0020 0x00001800 +DATA 4 0x021b0818 0x00000000 +DATA 4 0x021b08b8 0x00000800 +DATA 4 0x021b0004 0x00025564 +DATA 4 0x021b0404 0x00011006 +DATA 4 0x021b001c 0x00000000 diff --git a/board/freescale/mx6slevk/mx6slevk.c b/board/freescale/mx6slevk/mx6slevk.c new file mode 100644 index 0000000..69fe8fc --- /dev/null +++ b/board/freescale/mx6slevk/mx6slevk.c @@ -0,0 +1,102 @@ +/* + * Copyright (C) 2013 Freescale Semiconductor, Inc. + * + * Author: Fabio Estevam <fabio.estevam@freescale.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#include <asm/arch/clock.h> +#include <asm/arch/iomux.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/mx6-pins.h> +#include <asm/arch/sys_proto.h> +#include <asm/gpio.h> +#include <asm/imx-common/iomux-v3.h> +#include <asm/io.h> +#include <asm/sizes.h> +#include <common.h> +#include <fsl_esdhc.h> +#include <mmc.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ + PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \ + PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +#define USDHC_PAD_CTRL (PAD_CTL_PUS_22K_UP | \ + PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \ + PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +int dram_init(void) +{ + gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); + + return 0; +} + +static iomux_v3_cfg_t const uart1_pads[] = { + MX6_PAD_UART1_TXD__UART1_TXD | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_UART1_RXD__UART1_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +static iomux_v3_cfg_t const usdhc2_pads[] = { + MX6_PAD_SD2_CLK__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_CMD__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DAT0__USDHC2_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DAT1__USDHC2_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DAT2__USDHC2_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DAT3__USDHC2_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), +}; + +static void setup_iomux_uart(void) +{ + imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); +} + +static struct fsl_esdhc_cfg usdhc_cfg[1] = { + {USDHC2_BASE_ADDR}, +}; + +int board_mmc_getcd(struct mmc *mmc) +{ + return 1; /* Assume boot SD always present */ +} + +int board_mmc_init(bd_t *bis) +{ + imx_iomux_v3_setup_multiple_pads(usdhc2_pads, ARRAY_SIZE(usdhc2_pads)); + + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); + return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); +} + +int board_early_init_f(void) +{ + setup_iomux_uart(); + return 0; +} + +int board_init(void) +{ + /* address of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + + return 0; +} + +u32 get_board_rev(void) +{ + return get_cpu_rev(); +} + +int checkboard(void) +{ + puts("Board: MX6SLEVK\n"); + + return 0; +} diff --git a/board/freescale/titanium/Makefile b/board/freescale/titanium/Makefile new file mode 100644 index 0000000..46827f8 --- /dev/null +++ b/board/freescale/titanium/Makefile @@ -0,0 +1,36 @@ +# +# Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de> +# +# (C) Copyright 2011 Freescale Semiconductor, Inc. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS := titanium.o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/titanium/imximage.cfg b/board/freescale/titanium/imximage.cfg new file mode 100644 index 0000000..1934343 --- /dev/null +++ b/board/freescale/titanium/imximage.cfg @@ -0,0 +1,178 @@ +/* + * Projectiondesign AS + * Derived from ./board/freescale/mx6qsabrelite/imximage.cfg + * + * Copyright (C) 2011 Freescale Semiconductor, Inc. + * Jason Liu <r64343@freescale.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ + +/* image version */ + +IMAGE_VERSION 2 + +/* + * Boot Device : one of + * sd, nand + */ +BOOT_FROM nand + +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ + +#define __ASSEMBLY__ +#include <config.h> +#include "asm/arch/mx6-ddr.h" +#include "asm/arch/iomux.h" +#include "asm/arch/crm_regs.h" + +DATA 4, MX6_IOM_DRAM_SDQS0, 0x00000030 +DATA 4, MX6_IOM_DRAM_SDQS1, 0x00000030 +DATA 4, MX6_IOM_DRAM_SDQS2, 0x00000030 +DATA 4, MX6_IOM_DRAM_SDQS3, 0x00000030 +DATA 4, MX6_IOM_DRAM_SDQS4, 0x00000030 +DATA 4, MX6_IOM_DRAM_SDQS5, 0x00000030 +DATA 4, MX6_IOM_DRAM_SDQS6, 0x00000030 +DATA 4, MX6_IOM_DRAM_SDQS7, 0x00000030 + +DATA 4, MX6_IOM_DRAM_DQM0, 0x00020030 +DATA 4, MX6_IOM_DRAM_DQM1, 0x00020030 +DATA 4, MX6_IOM_DRAM_DQM2, 0x00020030 +DATA 4, MX6_IOM_DRAM_DQM3, 0x00020030 +DATA 4, MX6_IOM_DRAM_DQM4, 0x00020030 +DATA 4, MX6_IOM_DRAM_DQM5, 0x00020030 +DATA 4, MX6_IOM_DRAM_DQM6, 0x00020030 +DATA 4, MX6_IOM_DRAM_DQM7, 0x00020030 + +DATA 4, MX6_IOM_DRAM_CAS, 0x00020030 +DATA 4, MX6_IOM_DRAM_RAS, 0x00020030 +DATA 4, MX6_IOM_DRAM_SDCLK_0, 0x00020030 +DATA 4, MX6_IOM_DRAM_SDCLK_1, 0x00020030 + +DATA 4, MX6_IOM_DRAM_RESET, 0x00020030 +DATA 4, MX6_IOM_DRAM_SDCKE0, 0x00003000 +DATA 4, MX6_IOM_DRAM_SDCKE1, 0x00003000 + +DATA 4, MX6_IOM_DRAM_SDBA2, 0x00000000 + +DATA 4, MX6_IOM_DRAM_SDODT0, 0x00003030 +DATA 4, MX6_IOM_DRAM_SDODT1, 0x00003030 + +DATA 4, MX6_IOM_GRP_B0DS, 0x00000030 +DATA 4, MX6_IOM_GRP_B1DS, 0x00000030 +DATA 4, MX6_IOM_GRP_B2DS, 0x00000030 +DATA 4, MX6_IOM_GRP_B3DS, 0x00000030 +DATA 4, MX6_IOM_GRP_B4DS, 0x00000030 +DATA 4, MX6_IOM_GRP_B5DS, 0x00000030 +DATA 4, MX6_IOM_GRP_B6DS, 0x00000030 +DATA 4, MX6_IOM_GRP_B7DS, 0x00000030 +DATA 4, MX6_IOM_GRP_ADDDS, 0x00000030 + +/* (differential input) */ +DATA 4, MX6_IOM_DDRMODE_CTL, 0x00020000 +/* disable ddr pullups */ +DATA 4, MX6_IOM_GRP_DDRPKE, 0x00000000 +/* (differential input) */ +DATA 4, MX6_IOM_GRP_DDRMODE, 0x00020000 +/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */ +DATA 4, MX6_IOM_GRP_CTLDS, 0x00000030 +/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */ +DATA 4, MX6_IOM_GRP_DDR_TYPE, 0x000C0000 + +/* Read data DQ Byte0-3 delay */ +DATA 4, MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333 +DATA 4, MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333 +DATA 4, MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333 +DATA 4, MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333 +DATA 4, MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333 +DATA 4, MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333 +DATA 4, MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333 +DATA 4, MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333 + +/* + * MDMISC mirroring interleaved (row/bank/col) + */ +DATA 4, MX6_MMDC_P0_MDMISC, 0x00081740 + +DATA 4, MX6_MMDC_P0_MDSCR, 0x00008000 +DATA 4, MX6_MMDC_P0_MDCFG0, 0x555A7975 +DATA 4, MX6_MMDC_P0_MDCFG1, 0xFF538E64 +DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB +DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2 +DATA 4, MX6_MMDC_P0_MDOR, 0x005B0E21 +DATA 4, MX6_MMDC_P0_MDOTC, 0x09444040 +DATA 4, MX6_MMDC_P0_MDPDC, 0x00025576 +DATA 4, MX6_MMDC_P0_MDASP, 0x00000017 +DATA 4, MX6_MMDC_P0_MDCTL, 0x83190000 +DATA 4, MX6_MMDC_P0_MDSCR, 0x04088032 +DATA 4, MX6_MMDC_P0_MDSCR, 0x0408803A +DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033 +DATA 4, MX6_MMDC_P0_MDSCR, 0x0000803B +DATA 4, MX6_MMDC_P0_MDSCR, 0x00428031 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00428039 +DATA 4, MX6_MMDC_P0_MDSCR, 0x09408030 +DATA 4, MX6_MMDC_P0_MDSCR, 0x09408038 +DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040 +DATA 4, MX6_MMDC_P0_MDSCR, 0x04008048 +DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xA1380003 +DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xA1380003 +DATA 4, MX6_MMDC_P0_MDREF, 0x00005800 +DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00022227 +DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00022227 +DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x434B0350 +DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x034C0359 +DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x434B0350 +DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x03650348 +DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x4436383B +DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x39393341 +DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x35373933 +DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x48254A36 +DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x001F001F +DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x001F001F +DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x00440044 +DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x00440044 +DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800 +DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000 +DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006 + +/* set the default clock gate to save power */ +DATA 4, CCM_CCGR0, 0x00C03F3F +DATA 4, CCM_CCGR1, 0x0030FC03 +DATA 4, CCM_CCGR2, 0x0FFFC000 +DATA 4, CCM_CCGR3, 0x3FF00000 +DATA 4, CCM_CCGR4, 0xFFFFF300 /* enable NAND/GPMI/BCH clocks */ +DATA 4, CCM_CCGR5, 0x0F0000C3 +DATA 4, CCM_CCGR6, 0x000003FF + +/* enable AXI cache for VDOA/VPU/IPU */ +DATA 4, MX6_IOMUXC_GPR4, 0xF00000CF +/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ +DATA 4, MX6_IOMUXC_GPR6, 0x007F007F +DATA 4, MX6_IOMUXC_GPR7, 0x007F007F diff --git a/board/freescale/titanium/titanium.c b/board/freescale/titanium/titanium.c new file mode 100644 index 0000000..5250522 --- /dev/null +++ b/board/freescale/titanium/titanium.c @@ -0,0 +1,334 @@ +/* + * Copyright (C) 2013 Stefan Roese <sr@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/iomux.h> +#include <asm/arch/mx6q_pins.h> +#include <asm/arch/crm_regs.h> +#include <asm/arch/sys_proto.h> +#include <asm/gpio.h> +#include <asm/imx-common/iomux-v3.h> +#include <asm/imx-common/mxc_i2c.h> +#include <asm/imx-common/boot_mode.h> +#include <mmc.h> +#include <fsl_esdhc.h> +#include <micrel.h> +#include <miiphy.h> +#include <netdev.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \ + PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_HYS) + +#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ + PAD_CTL_ODE | PAD_CTL_SRE_FAST) + +int dram_init(void) +{ + gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); + + return 0; +} + +iomux_v3_cfg_t const uart1_pads[] = { + MX6_PAD_SD3_DAT6__UART1_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_SD3_DAT7__UART1_TXD | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +iomux_v3_cfg_t const uart2_pads[] = { + MX6_PAD_EIM_D26__UART2_TXD | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_EIM_D27__UART2_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +iomux_v3_cfg_t const uart4_pads[] = { + MX6_PAD_CSI0_DAT12__UART4_TXD | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_CSI0_DAT13__UART4_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +#define PC MUX_PAD_CTRL(I2C_PAD_CTRL) + +struct i2c_pads_info i2c_pad_info0 = { + .scl = { + .i2c_mode = MX6_PAD_CSI0_DAT9__I2C1_SCL | PC, + .gpio_mode = MX6_PAD_CSI0_DAT9__GPIO_5_27 | PC, + .gp = IMX_GPIO_NR(5, 27) + }, + .sda = { + .i2c_mode = MX6_PAD_CSI0_DAT8__I2C1_SDA | PC, + .gpio_mode = MX6_PAD_CSI0_DAT8__GPIO_5_26 | PC, + .gp = IMX_GPIO_NR(5, 26) + } +}; + +struct i2c_pads_info i2c_pad_info2 = { + .scl = { + .i2c_mode = MX6_PAD_GPIO_3__I2C3_SCL | PC, + .gpio_mode = MX6_PAD_GPIO_3__GPIO_1_3 | PC, + .gp = IMX_GPIO_NR(1, 3) + }, + .sda = { + .i2c_mode = MX6_PAD_GPIO_16__I2C3_SDA | PC, + .gpio_mode = MX6_PAD_GPIO_16__GPIO_7_11 | PC, + .gp = IMX_GPIO_NR(7, 11) + } +}; + +iomux_v3_cfg_t const usdhc3_pads[] = { + MX6_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT1__USDHC3_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT2__USDHC3_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT3__USDHC3_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT5__GPIO_7_0 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ +}; + +iomux_v3_cfg_t const enet_pads1[] = { + MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TXC__ENET_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD0__ENET_RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD1__ENET_RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD2__ENET_RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD3__ENET_RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL), + /* pin 35 - 1 (PHY_AD2) on reset */ + MX6_PAD_RGMII_RXC__GPIO_6_30 | MUX_PAD_CTRL(NO_PAD_CTRL), + /* pin 32 - 1 - (MODE0) all */ + MX6_PAD_RGMII_RD0__GPIO_6_25 | MUX_PAD_CTRL(NO_PAD_CTRL), + /* pin 31 - 1 - (MODE1) all */ + MX6_PAD_RGMII_RD1__GPIO_6_27 | MUX_PAD_CTRL(NO_PAD_CTRL), + /* pin 28 - 1 - (MODE2) all */ + MX6_PAD_RGMII_RD2__GPIO_6_28 | MUX_PAD_CTRL(NO_PAD_CTRL), + /* pin 27 - 1 - (MODE3) all */ + MX6_PAD_RGMII_RD3__GPIO_6_29 | MUX_PAD_CTRL(NO_PAD_CTRL), + /* pin 33 - 1 - (CLK125_EN) 125Mhz clockout enabled */ + MX6_PAD_RGMII_RX_CTL__GPIO_6_24 | MUX_PAD_CTRL(NO_PAD_CTRL), + /* pin 42 PHY nRST */ + MX6_PAD_EIM_D23__GPIO_3_23 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +iomux_v3_cfg_t const enet_pads2[] = { + MX6_PAD_RGMII_RXC__ENET_RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD0__ENET_RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD1__ENET_RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD2__ENET_RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD3__ENET_RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), +}; + +iomux_v3_cfg_t nfc_pads[] = { + MX6_PAD_NANDF_CLE__RAWNAND_CLE | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_NANDF_ALE__RAWNAND_ALE | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_NANDF_WP_B__RAWNAND_RESETN | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_NANDF_RB0__RAWNAND_READY0 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_NANDF_CS0__RAWNAND_CE0N | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_NANDF_CS1__RAWNAND_CE1N | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_NANDF_CS2__RAWNAND_CE2N | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_NANDF_CS3__RAWNAND_CE3N | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_SD4_CMD__RAWNAND_RDN | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_SD4_CLK__RAWNAND_WRN | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_NANDF_D0__RAWNAND_D0 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_NANDF_D1__RAWNAND_D1 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_NANDF_D2__RAWNAND_D2 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_NANDF_D3__RAWNAND_D3 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_NANDF_D4__RAWNAND_D4 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_NANDF_D5__RAWNAND_D5 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_NANDF_D6__RAWNAND_D6 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_NANDF_D7__RAWNAND_D7 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_SD4_DAT0__RAWNAND_DQS | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +static void setup_gpmi_nand(void) +{ + struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; + + /* config gpmi nand iomux */ + imx_iomux_v3_setup_multiple_pads(nfc_pads, + ARRAY_SIZE(nfc_pads)); + + /* config gpmi and bch clock to 100 MHz */ + clrsetbits_le32(&mxc_ccm->cs2cdr, + MXC_CCM_CS2CDR_ENFC_CLK_PODF_MASK | + MXC_CCM_CS2CDR_ENFC_CLK_PRED_MASK | + MXC_CCM_CS2CDR_ENFC_CLK_SEL_MASK, + MXC_CCM_CS2CDR_ENFC_CLK_PODF(0) | + MXC_CCM_CS2CDR_ENFC_CLK_PRED(3) | + MXC_CCM_CS2CDR_ENFC_CLK_SEL(3)); + + /* enable gpmi and bch clock gating */ + setbits_le32(&mxc_ccm->CCGR4, + MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK | + MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK | + MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK | + MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK | + MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_OFFSET); + + /* enable apbh clock gating */ + setbits_le32(&mxc_ccm->CCGR0, MXC_CCM_CCGR0_APBHDMA_MASK); +} + +static void setup_iomux_enet(void) +{ + gpio_direction_output(IMX_GPIO_NR(3, 23), 0); + gpio_direction_output(IMX_GPIO_NR(6, 30), 1); + gpio_direction_output(IMX_GPIO_NR(6, 25), 1); + gpio_direction_output(IMX_GPIO_NR(6, 27), 1); + gpio_direction_output(IMX_GPIO_NR(6, 28), 1); + gpio_direction_output(IMX_GPIO_NR(6, 29), 1); + imx_iomux_v3_setup_multiple_pads(enet_pads1, ARRAY_SIZE(enet_pads1)); + gpio_direction_output(IMX_GPIO_NR(6, 24), 1); + + /* Need delay 10ms according to KSZ9021 spec */ + udelay(1000 * 10); + gpio_set_value(IMX_GPIO_NR(3, 23), 1); + + imx_iomux_v3_setup_multiple_pads(enet_pads2, ARRAY_SIZE(enet_pads2)); +} + +static void setup_iomux_uart(void) +{ + imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); + imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads)); + imx_iomux_v3_setup_multiple_pads(uart4_pads, ARRAY_SIZE(uart4_pads)); +} + +#ifdef CONFIG_USB_EHCI_MX6 +int board_ehci_hcd_init(int port) +{ + return 0; +} + +#endif + +#ifdef CONFIG_FSL_ESDHC +struct fsl_esdhc_cfg usdhc_cfg[1] = { + { USDHC3_BASE_ADDR }, +}; + +int board_mmc_getcd(struct mmc *mmc) +{ + struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; + + if (cfg->esdhc_base == USDHC3_BASE_ADDR) { + gpio_direction_input(IMX_GPIO_NR(7, 0)); + return !gpio_get_value(IMX_GPIO_NR(7, 0)); + } + + return 0; +} + +int board_mmc_init(bd_t *bis) +{ + /* + * Only one USDHC controller on titianium + */ + imx_iomux_v3_setup_multiple_pads(usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); + + return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); +} +#endif + +int board_phy_config(struct phy_device *phydev) +{ + /* min rx data delay */ + ksz9021_phy_extended_write(phydev, + MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW, 0x0); + /* min tx data delay */ + ksz9021_phy_extended_write(phydev, + MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW, 0x0); + /* max rx/tx clock delay, min rx/tx control */ + ksz9021_phy_extended_write(phydev, + MII_KSZ9021_EXT_RGMII_CLOCK_SKEW, 0xf0f0); + if (phydev->drv->config) + phydev->drv->config(phydev); + + return 0; +} + +int board_eth_init(bd_t *bis) +{ + int ret; + + setup_iomux_enet(); + + ret = cpu_eth_init(bis); + if (ret) + printf("FEC MXC: %s:failed\n", __func__); + + return 0; +} + +int board_early_init_f(void) +{ + setup_iomux_uart(); + + return 0; +} + +int board_init(void) +{ + /* address of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + + setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info0); + setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2); + + setup_gpmi_nand(); + + return 0; +} + +int checkboard(void) +{ + puts("Board: Titanium\n"); + + return 0; +} + +#ifdef CONFIG_CMD_BMODE +static const struct boot_mode board_boot_modes[] = { + /* NAND */ + { "nand", MAKE_CFGVAL(0x80, 0x02, 0x00, 0x00) }, + /* 4 bit bus width */ + { "mmc0", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00) }, + { "mmc1", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00) }, + { NULL, 0 }, +}; +#endif + +int misc_init_r(void) +{ +#ifdef CONFIG_CMD_BMODE + add_board_boot_modes(board_boot_modes); +#endif + + return 0; +} diff --git a/board/genesi/mx51_efikamx/efikamx-usb.c b/board/genesi/mx51_efikamx/efikamx-usb.c index cf020c3..cabad70 100644 --- a/board/genesi/mx51_efikamx/efikamx-usb.c +++ b/board/genesi/mx51_efikamx/efikamx-usb.c @@ -26,8 +26,7 @@ #include <usb.h> #include <asm/io.h> #include <asm/arch/imx-regs.h> -#include <asm/arch/mx5x_pins.h> -#include <asm/arch/iomux.h> +#include <asm/arch/iomux-mx51.h> #include <asm/gpio.h> #include <usb/ehci-fsl.h> #include <usb/ulpi.h> @@ -35,40 +34,57 @@ #include "../../../drivers/usb/host/ehci.h" -/* USB pin configuration */ -#define USB_PAD_CONFIG (PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST | \ - PAD_CTL_DRV_HIGH | PAD_CTL_100K_PU | \ - PAD_CTL_HYS_ENABLE | PAD_CTL_PUE_PULL) - /* * Configure the USB H1 and USB H2 IOMUX */ void setup_iomux_usb(void) { - setup_iomux_usb_h1(); - - if (machine_is_efikasb()) - setup_iomux_usb_h2(); - - /* USB PHY reset */ - mxc_request_iomux(MX51_PIN_EIM_D27, IOMUX_CONFIG_ALT1); - mxc_iomux_set_pad(MX51_PIN_EIM_D27, PAD_CTL_PKE_ENABLE | - PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH); - - /* USB HUB reset */ - mxc_request_iomux(MX51_PIN_GPIO1_5, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_GPIO1_5, PAD_CTL_PKE_ENABLE | - PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH); - - /* WIFI EN (act low) */ - mxc_request_iomux(MX51_PIN_EIM_A22, IOMUX_CONFIG_GPIO); - mxc_iomux_set_pad(MX51_PIN_EIM_A22, 0); - /* WIFI RESET */ - mxc_request_iomux(MX51_PIN_EIM_A16, IOMUX_CONFIG_GPIO); - mxc_iomux_set_pad(MX51_PIN_EIM_A16, 0); - /* BT EN (act low) */ - mxc_request_iomux(MX51_PIN_EIM_A17, IOMUX_CONFIG_GPIO); - mxc_iomux_set_pad(MX51_PIN_EIM_A17, 0); + static const iomux_v3_cfg_t usb_h1_pads[] = { + MX51_PAD_USBH1_CLK__USBH1_CLK, + MX51_PAD_USBH1_DIR__USBH1_DIR, + MX51_PAD_USBH1_STP__USBH1_STP, + MX51_PAD_USBH1_NXT__USBH1_NXT, + MX51_PAD_USBH1_DATA0__USBH1_DATA0, + MX51_PAD_USBH1_DATA1__USBH1_DATA1, + MX51_PAD_USBH1_DATA2__USBH1_DATA2, + MX51_PAD_USBH1_DATA3__USBH1_DATA3, + MX51_PAD_USBH1_DATA4__USBH1_DATA4, + MX51_PAD_USBH1_DATA5__USBH1_DATA5, + MX51_PAD_USBH1_DATA6__USBH1_DATA6, + MX51_PAD_USBH1_DATA7__USBH1_DATA7, + }; + + static const iomux_v3_cfg_t usb_pads[] = { + MX51_PAD_EIM_D27__GPIO2_9, /* USB PHY reset */ + MX51_PAD_GPIO1_5__GPIO1_5, /* USB HUB reset */ + NEW_PAD_CTRL(MX51_PAD_EIM_A22__GPIO2_16, 0), /* WIFI /EN */ + NEW_PAD_CTRL(MX51_PAD_EIM_A16__GPIO2_10, 0), /* WIFI RESET */ + NEW_PAD_CTRL(MX51_PAD_EIM_A17__GPIO2_11, 0), /* BT /EN */ + }; + + imx_iomux_v3_setup_multiple_pads(usb_h1_pads, ARRAY_SIZE(usb_h1_pads)); + + if (machine_is_efikasb()) { + static const iomux_v3_cfg_t usb_h2_pads[] = { + MX51_PAD_EIM_A24__USBH2_CLK, + MX51_PAD_EIM_A25__USBH2_DIR, + MX51_PAD_EIM_A26__USBH2_STP, + MX51_PAD_EIM_A27__USBH2_NXT, + MX51_PAD_EIM_D16__USBH2_DATA0, + MX51_PAD_EIM_D17__USBH2_DATA1, + MX51_PAD_EIM_D18__USBH2_DATA2, + MX51_PAD_EIM_D19__USBH2_DATA3, + MX51_PAD_EIM_D20__USBH2_DATA4, + MX51_PAD_EIM_D21__USBH2_DATA5, + MX51_PAD_EIM_D22__USBH2_DATA6, + MX51_PAD_EIM_D23__USBH2_DATA7, + }; + + imx_iomux_v3_setup_multiple_pads(usb_h2_pads, + ARRAY_SIZE(usb_h2_pads)); + } + + imx_iomux_v3_setup_multiple_pads(usb_pads, ARRAY_SIZE(usb_pads)); } /* @@ -77,18 +93,18 @@ void setup_iomux_usb(void) static void efika_usb_enable_devices(void) { /* Enable Bluetooth */ - gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_EIM_A17), 0); + gpio_direction_output(IMX_GPIO_NR(2, 11), 0); udelay(10000); - gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_EIM_A17), 1); + gpio_set_value(IMX_GPIO_NR(2, 11), 1); /* Enable WiFi */ - gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_EIM_A22), 1); + gpio_direction_output(IMX_GPIO_NR(2, 16), 1); udelay(10000); /* Reset the WiFi chip */ - gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_EIM_A16), 0); + gpio_direction_output(IMX_GPIO_NR(2, 10), 0); udelay(10000); - gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_EIM_A16), 1); + gpio_set_value(IMX_GPIO_NR(2, 10), 1); } /* @@ -97,11 +113,11 @@ static void efika_usb_enable_devices(void) static void efika_usb_hub_reset(void) { /* HUB reset */ - gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_GPIO1_5), 1); + gpio_direction_output(IMX_GPIO_NR(1, 5), 1); udelay(1000); - gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_GPIO1_5), 0); + gpio_set_value(IMX_GPIO_NR(1, 5), 0); udelay(1000); - gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_GPIO1_5), 1); + gpio_set_value(IMX_GPIO_NR(1, 5), 1); } /* @@ -110,28 +126,26 @@ static void efika_usb_hub_reset(void) static void efika_usb_phy_reset(void) { /* SMSC 3317 PHY reset */ - gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_EIM_D27), 0); + gpio_direction_output(IMX_GPIO_NR(2, 9), 0); udelay(1000); - gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_EIM_D27), 1); + gpio_set_value(IMX_GPIO_NR(2, 9), 1); } static void efika_ehci_init(struct usb_ehci *ehci, uint32_t stp_gpio, - uint32_t alt0, uint32_t alt1) + iomux_v3_cfg_t stp_pad_gpio, + iomux_v3_cfg_t stp_pad_usb) { int ret; struct ulpi_regs *ulpi = (struct ulpi_regs *)0; struct ulpi_viewport ulpi_vp; - mxc_request_iomux(stp_gpio, alt0); - mxc_iomux_set_pad(stp_gpio, PAD_CTL_DRV_HIGH | - PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); - gpio_direction_output(IOMUX_TO_GPIO(stp_gpio), 0); + imx_iomux_v3_setup_pad(stp_pad_gpio); + gpio_direction_output(stp_gpio, 0); udelay(1000); - gpio_set_value(IOMUX_TO_GPIO(stp_gpio), 1); + gpio_set_value(stp_gpio, 1); udelay(1000); - mxc_request_iomux(stp_gpio, alt1); - mxc_iomux_set_pad(stp_gpio, USB_PAD_CONFIG); + imx_iomux_v3_setup_pad(stp_pad_usb); udelay(10000); ulpi_vp.viewport_addr = (u32)&ehci->ulpi_viewpoint; @@ -204,11 +218,13 @@ void board_ehci_hcd_postinit(struct usb_ehci *ehci, int port) tmp = (tmp & ~0x3) | 0x01; writel(tmp, OTG_BASE_ADDR + 0x80c); } else if (port == 1) { - efika_ehci_init(ehci, MX51_PIN_USBH1_STP, - IOMUX_CONFIG_ALT2, IOMUX_CONFIG_ALT0); + efika_ehci_init(ehci, IMX_GPIO_NR(1, 27), + MX51_PAD_USBH1_STP__GPIO1_27, + MX51_PAD_USBH1_STP__USBH1_STP); } else if ((port == 2) && machine_is_efikasb()) { - efika_ehci_init(ehci, MX51_PIN_EIM_A26, - IOMUX_CONFIG_ALT1, IOMUX_CONFIG_ALT2); + efika_ehci_init(ehci, IMX_GPIO_NR(2, 20), + MX51_PAD_EIM_A26__GPIO2_20, + MX51_PAD_EIM_A26__USBH2_STP); } if (port) diff --git a/board/genesi/mx51_efikamx/efikamx.c b/board/genesi/mx51_efikamx/efikamx.c index 69d41db..13582a2 100644 --- a/board/genesi/mx51_efikamx/efikamx.c +++ b/board/genesi/mx51_efikamx/efikamx.c @@ -293,7 +293,7 @@ static iomux_v3_cfg_t const efikamx_sdhc1_pads[] = { static iomux_v3_cfg_t const efikamx_sdhc1_cd_pads[] = { MX51_PAD_GPIO1_0__SD1_CD, - MX51_PAD_EIM_CS2__SD1_CD, + NEW_PAD_CTRL(MX51_PAD_EIM_CS2__GPIO2_27, MX51_ESDHC_PAD_CTRL), }; #define EFIKAMX_SDHC1_CD IMX_GPIO_NR(1, 0) diff --git a/board/h2200/h2200.c b/board/h2200/h2200.c index 720b06e..738e480 100644 --- a/board/h2200/h2200.c +++ b/board/h2200/h2200.c @@ -32,6 +32,15 @@ int board_eth_init(bd_t *bis) return 0; } +void reset_cpu(ulong ignore) +{ + /* Enable VLIO interface on Hamcop */ + writeb(0x1, 0x4000); + + /* Reset board (cold reset) */ + writeb(0xff, 0x4002); +} + int board_init(void) { /* We have RAM, disable cache */ diff --git a/board/isee/igep0033/Makefile b/board/isee/igep0033/Makefile new file mode 100644 index 0000000..54a4b75 --- /dev/null +++ b/board/isee/igep0033/Makefile @@ -0,0 +1,46 @@ +# +# Makefile +# +# Copyright (C) 2013, ISEE 2007 SL - http://www.isee.biz/ +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed "as is" WITHOUT ANY WARRANTY of any +# kind, whether express or implied; without even the implied warranty +# of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +ifdef CONFIG_SPL_BUILD +COBJS := mux.o +endif + +COBJS += board.o +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS) $(SOBJS)) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/isee/igep0033/board.c b/board/isee/igep0033/board.c new file mode 100644 index 0000000..d315516 --- /dev/null +++ b/board/isee/igep0033/board.c @@ -0,0 +1,232 @@ +/* + * Board functions for IGEP COM AQUILA/CYGNUS based boards + * + * Copyright (C) 2013, ISEE 2007 SL - http://www.isee.biz/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <common.h> +#include <errno.h> +#include <spl.h> +#include <asm/arch/cpu.h> +#include <asm/arch/hardware.h> +#include <asm/arch/omap.h> +#include <asm/arch/ddr_defs.h> +#include <asm/arch/clock.h> +#include <asm/arch/gpio.h> +#include <asm/arch/mmc_host_def.h> +#include <asm/arch/sys_proto.h> +#include <asm/io.h> +#include <asm/emif.h> +#include <asm/gpio.h> +#include <i2c.h> +#include <miiphy.h> +#include <cpsw.h> +#include "board.h" + +DECLARE_GLOBAL_DATA_PTR; + +static struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE; +#ifdef CONFIG_SPL_BUILD +static struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE; +#endif + +/* MII mode defines */ +#define RMII_MODE_ENABLE 0x4D + +static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; + +/* UART Defines */ +#ifdef CONFIG_SPL_BUILD +#define UART_RESET (0x1 << 1) +#define UART_CLK_RUNNING_MASK 0x1 +#define UART_SMART_IDLE_EN (0x1 << 0x3) + +static void rtc32k_enable(void) +{ + struct rtc_regs *rtc = (struct rtc_regs *)RTC_BASE; + + /* + * Unlock the RTC's registers. For more details please see the + * RTC_SS section of the TRM. In order to unlock we need to + * write these specific values (keys) in this order. + */ + writel(0x83e70b13, &rtc->kick0r); + writel(0x95a4f1e0, &rtc->kick1r); + + /* Enable the RTC 32K OSC by setting bits 3 and 6. */ + writel((1 << 3) | (1 << 6), &rtc->osc); +} + +static const struct ddr_data ddr3_data = { + .datardsratio0 = K4B2G1646EBIH9_RD_DQS, + .datawdsratio0 = K4B2G1646EBIH9_WR_DQS, + .datafwsratio0 = K4B2G1646EBIH9_PHY_FIFO_WE, + .datawrsratio0 = K4B2G1646EBIH9_PHY_WR_DATA, + .datadldiff0 = PHY_DLL_LOCK_DIFF, +}; + +static const struct cmd_control ddr3_cmd_ctrl_data = { + .cmd0csratio = K4B2G1646EBIH9_RATIO, + .cmd0dldiff = K4B2G1646EBIH9_DLL_LOCK_DIFF, + .cmd0iclkout = K4B2G1646EBIH9_INVERT_CLKOUT, + + .cmd1csratio = K4B2G1646EBIH9_RATIO, + .cmd1dldiff = K4B2G1646EBIH9_DLL_LOCK_DIFF, + .cmd1iclkout = K4B2G1646EBIH9_INVERT_CLKOUT, + + .cmd2csratio = K4B2G1646EBIH9_RATIO, + .cmd2dldiff = K4B2G1646EBIH9_DLL_LOCK_DIFF, + .cmd2iclkout = K4B2G1646EBIH9_INVERT_CLKOUT, +}; + +static struct emif_regs ddr3_emif_reg_data = { + .sdram_config = K4B2G1646EBIH9_EMIF_SDCFG, + .ref_ctrl = K4B2G1646EBIH9_EMIF_SDREF, + .sdram_tim1 = K4B2G1646EBIH9_EMIF_TIM1, + .sdram_tim2 = K4B2G1646EBIH9_EMIF_TIM2, + .sdram_tim3 = K4B2G1646EBIH9_EMIF_TIM3, + .zq_config = K4B2G1646EBIH9_ZQ_CFG, + .emif_ddr_phy_ctlr_1 = K4B2G1646EBIH9_EMIF_READ_LATENCY, +}; +#endif + +/* + * Early system init of muxing and clocks. + */ +void s_init(void) +{ + /* WDT1 is already running when the bootloader gets control + * Disable it to avoid "random" resets + */ + writel(0xAAAA, &wdtimer->wdtwspr); + while (readl(&wdtimer->wdtwwps) != 0x0) + ; + writel(0x5555, &wdtimer->wdtwspr); + while (readl(&wdtimer->wdtwwps) != 0x0) + ; + +#ifdef CONFIG_SPL_BUILD + /* Setup the PLLs and the clocks for the peripherals */ + pll_init(); + + /* Enable RTC32K clock */ + rtc32k_enable(); + + /* UART softreset */ + u32 regval; + + enable_uart0_pin_mux(); + + regval = readl(&uart_base->uartsyscfg); + regval |= UART_RESET; + writel(regval, &uart_base->uartsyscfg); + while ((readl(&uart_base->uartsyssts) & + UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK) + ; + + /* Disable smart idle */ + regval = readl(&uart_base->uartsyscfg); + regval |= UART_SMART_IDLE_EN; + writel(regval, &uart_base->uartsyscfg); + + gd = &gdata; + + preloader_console_init(); + + /* Configure board pin mux */ + enable_board_pin_mux(); + + config_ddr(303, K4B2G1646EBIH9_IOCTRL_VALUE, &ddr3_data, + &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0); +#endif +} + +/* + * Basic board specific setup. Pinmux has been handled already. + */ +int board_init(void) +{ + gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100; + + gpmc_init(); + + return 0; +} + +#if defined(CONFIG_DRIVER_TI_CPSW) +static void cpsw_control(int enabled) +{ + /* VTP can be added here */ + + return; +} + +static struct cpsw_slave_data cpsw_slaves[] = { + { + .slave_reg_ofs = 0x208, + .sliver_reg_ofs = 0xd80, + .phy_id = 0, + .phy_if = PHY_INTERFACE_MODE_RMII, + }, +}; + +static struct cpsw_platform_data cpsw_data = { + .mdio_base = CPSW_MDIO_BASE, + .cpsw_base = CPSW_BASE, + .mdio_div = 0xff, + .channels = 8, + .cpdma_reg_ofs = 0x800, + .slaves = 1, + .slave_data = cpsw_slaves, + .ale_reg_ofs = 0xd00, + .ale_entries = 1024, + .host_port_reg_ofs = 0x108, + .hw_stats_reg_ofs = 0x900, + .mac_control = (1 << 5), + .control = cpsw_control, + .host_port_num = 0, + .version = CPSW_CTRL_VERSION_2, +}; + +int board_eth_init(bd_t *bis) +{ + int rv, ret = 0; + uint8_t mac_addr[6]; + uint32_t mac_hi, mac_lo; + + if (!eth_getenv_enetaddr("ethaddr", mac_addr)) { + /* try reading mac address from efuse */ + mac_lo = readl(&cdev->macid0l); + mac_hi = readl(&cdev->macid0h); + mac_addr[0] = mac_hi & 0xFF; + mac_addr[1] = (mac_hi & 0xFF00) >> 8; + mac_addr[2] = (mac_hi & 0xFF0000) >> 16; + mac_addr[3] = (mac_hi & 0xFF000000) >> 24; + mac_addr[4] = mac_lo & 0xFF; + mac_addr[5] = (mac_lo & 0xFF00) >> 8; + if (is_valid_ether_addr(mac_addr)) + eth_setenv_enetaddr("ethaddr", mac_addr); + } + + writel(RMII_MODE_ENABLE, &cdev->miisel); + + rv = cpsw_register(&cpsw_data); + if (rv < 0) + printf("Error %d registering CPSW switch\n", rv); + else + ret += rv; + + return ret; +} +#endif + diff --git a/board/isee/igep0033/board.h b/board/isee/igep0033/board.h new file mode 100644 index 0000000..37988e0 --- /dev/null +++ b/board/isee/igep0033/board.h @@ -0,0 +1,27 @@ +/* + * IGEP COM AQUILA/CYGNUS boards information header + * + * Copyright (C) 2013, ISEE 2007 SL - http://www.isee.biz/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _BOARD_H_ +#define _BOARD_H_ + +/* + * We must be able to enable uart0, for initial output. We then have a + * main pinmux function that can be overridden to enable all other pinmux that + * is required on the board. + */ +void enable_uart0_pin_mux(void); +void enable_board_pin_mux(void); +#endif diff --git a/board/isee/igep0033/mux.c b/board/isee/igep0033/mux.c new file mode 100644 index 0000000..16f4add --- /dev/null +++ b/board/isee/igep0033/mux.c @@ -0,0 +1,89 @@ +/* + * Copyright (C) 2013, ISEE 2007 SL - http://www.isee.biz/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <common.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/hardware.h> +#include <asm/arch/mux.h> +#include <asm/io.h> +#include <i2c.h> +#include "board.h" + +static struct module_pin_mux uart0_pin_mux[] = { + {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */ + {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */ + {-1}, +}; + +static struct module_pin_mux mmc0_pin_mux[] = { + {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */ + {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */ + {OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT1 */ + {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */ + {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */ + {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */ + {OFFSET(mcasp0_aclkx), (MODE(4) | RXACTIVE)}, /* MMC0_CD */ + {-1}, +}; + +static struct module_pin_mux nand_pin_mux[] = { + {OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD0 */ + {OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD1 */ + {OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD2 */ + {OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD3 */ + {OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD4 */ + {OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD5 */ + {OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD6 */ + {OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD7 */ + {OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */ + {OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)}, /* NAND_WPN */ + {OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)}, /* NAND_CS0 */ + {OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */ + {OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)}, /* NAND_OE */ + {OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)}, /* NAND_WEN */ + {OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)}, /* NAND_BE_CLE */ + {-1}, +}; + +static struct module_pin_mux rmii1_pin_mux[] = { + {OFFSET(mii1_txen), MODE(1)}, /* RMII1_TXEN */ + {OFFSET(mii1_rxerr), MODE(1) | RXACTIVE}, /* RMII1_RXERR */ + {OFFSET(mii1_crs), MODE(1) | RXACTIVE}, /* RMII1_CRS_DV */ + {OFFSET(mii1_rxd0), MODE(1) | RXACTIVE}, /* RMII1_RXD0 */ + {OFFSET(mii1_rxd1), MODE(1) | RXACTIVE}, /* RMII1_RXD1 */ + {OFFSET(mii1_txd0), MODE(1)}, /* RMII1_TXD0 */ + {OFFSET(mii1_txd1), MODE(1)}, /* RMII1_TXD1 */ + {OFFSET(rmii1_refclk), MODE(0) | RXACTIVE}, /* RMII1_REF_CLK */ + {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, /* MDIO_DATA */ + {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */ + {-1}, +}; + +void enable_uart0_pin_mux(void) +{ + configure_module_pin_mux(uart0_pin_mux); +} + +/* + * Do board-specific muxes. + */ +void enable_board_pin_mux(void) +{ + /* NAND Flash */ + configure_module_pin_mux(nand_pin_mux); + /* SD Card */ + configure_module_pin_mux(mmc0_pin_mux); + /* Ethernet pinmux. */ + configure_module_pin_mux(rmii1_pin_mux); +} + diff --git a/board/karo/tx25/tx25.c b/board/karo/tx25/tx25.c index 85719a0..2952eba 100644 --- a/board/karo/tx25/tx25.c +++ b/board/karo/tx25/tx25.c @@ -27,9 +27,8 @@ #include <common.h> #include <asm/io.h> #include <asm/arch/imx-regs.h> -#include <asm/arch/imx25-pinmux.h> +#include <asm/arch/iomux-mx25.h> #include <asm/gpio.h> -#include <asm/arch/sys_proto.h> DECLARE_GLOBAL_DATA_PTR; @@ -42,36 +41,44 @@ void board_init_f(ulong bootflag) #endif #ifdef CONFIG_FEC_MXC +/* + * FIXME: need to revisit this + * The original code enabled PUE and 100-k pull-down without PKE, so the right + * value here is likely: + * 0 for no pull + * or: + * PAD_CTL_PUS_100K_DOWN for 100-k pull-down + */ +#define FEC_OUT_PAD_CTRL 0 + #define GPIO_FEC_RESET_B IMX_GPIO_NR(4, 7) #define GPIO_FEC_ENABLE_B IMX_GPIO_NR(4, 9) void tx25_fec_init(void) { - struct iomuxc_mux_ctl *muxctl; - struct iomuxc_pad_ctl *padctl; - u32 gpio_mux_mode = MX25_PIN_MUX_MODE(5); - u32 saved_rdata0_mode, saved_rdata1_mode, saved_rx_dv_mode; + static const iomux_v3_cfg_t fec_pads[] = { + MX25_PAD_FEC_TX_CLK__FEC_TX_CLK, + MX25_PAD_FEC_RX_DV__FEC_RX_DV, + MX25_PAD_FEC_RDATA0__FEC_RDATA0, + NEW_PAD_CTRL(MX25_PAD_FEC_TDATA0__FEC_TDATA0, FEC_OUT_PAD_CTRL), + NEW_PAD_CTRL(MX25_PAD_FEC_TX_EN__FEC_TX_EN, FEC_OUT_PAD_CTRL), + NEW_PAD_CTRL(MX25_PAD_FEC_MDC__FEC_MDC, FEC_OUT_PAD_CTRL), + MX25_PAD_FEC_MDIO__FEC_MDIO, + MX25_PAD_FEC_RDATA1__FEC_RDATA1, + NEW_PAD_CTRL(MX25_PAD_FEC_TDATA1__FEC_TDATA1, FEC_OUT_PAD_CTRL), + + NEW_PAD_CTRL(MX25_PAD_D13__GPIO_4_7, 0), /* FEC_RESET_B */ + NEW_PAD_CTRL(MX25_PAD_D11__GPIO_4_9, 0), /* FEC_ENABLE_B */ + }; + + static const iomux_v3_cfg_t fec_cfg_pads[] = { + MX25_PAD_FEC_RDATA0__GPIO_3_10, + MX25_PAD_FEC_RDATA1__GPIO_3_11, + MX25_PAD_FEC_RX_DV__GPIO_3_12, + }; debug("tx25_fec_init\n"); - /* - * fec pin init is generic - */ - mx25_fec_init_pins(); - - /* - * Set up the FEC_RESET_B and FEC_ENABLE GPIO pins. - * - * FEC_RESET_B: gpio4[7] is ALT 5 mode of pin D13 - * FEC_ENABLE_B: gpio4[9] is ALT 5 mode of pin D11 - */ - muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE; - padctl = (struct iomuxc_pad_ctl *)IMX_IOPADCTL_BASE; - - writel(gpio_mux_mode, &muxctl->pad_d13); - writel(gpio_mux_mode, &muxctl->pad_d11); - - writel(0x0, &padctl->pad_d13); - writel(0x0, &padctl->pad_d11); + imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads)); /* drop PHY power and assert reset (low) */ gpio_direction_output(GPIO_FEC_RESET_B, 0); @@ -99,15 +106,10 @@ void tx25_fec_init(void) * RMII mode is selected by FEC_RX_DV which is GPIO 3_12 in mux mode */ /* - * save three current mux modes and set each to gpio mode + * set each mux mode to gpio mode */ - saved_rdata0_mode = readl(&muxctl->pad_fec_rdata0); - saved_rdata1_mode = readl(&muxctl->pad_fec_rdata1); - saved_rx_dv_mode = readl(&muxctl->pad_fec_rx_dv); - - writel(gpio_mux_mode, &muxctl->pad_fec_rdata0); - writel(gpio_mux_mode, &muxctl->pad_fec_rdata1); - writel(gpio_mux_mode, &muxctl->pad_fec_rx_dv); + imx_iomux_v3_setup_multiple_pads(fec_cfg_pads, + ARRAY_SIZE(fec_cfg_pads)); /* * set each to 1 and make each an output @@ -128,19 +130,46 @@ void tx25_fec_init(void) /* * set FEC pins back */ - writel(saved_rdata0_mode, &muxctl->pad_fec_rdata0); - writel(saved_rdata1_mode, &muxctl->pad_fec_rdata1); - writel(saved_rx_dv_mode, &muxctl->pad_fec_rx_dv); + imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads)); } #else #define tx25_fec_init() #endif -int board_init() -{ #ifdef CONFIG_MXC_UART - mx25_uart1_init_pins(); +/* + * Set up input pins with hysteresis and 100-k pull-ups + */ +#define UART1_IN_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP) +/* + * FIXME: need to revisit this + * The original code enabled PUE and 100-k pull-down without PKE, so the right + * value here is likely: + * 0 for no pull + * or: + * PAD_CTL_PUS_100K_DOWN for 100-k pull-down + */ +#define UART1_OUT_PAD_CTRL 0 + +static void tx25_uart1_init(void) +{ + static const iomux_v3_cfg_t uart1_pads[] = { + NEW_PAD_CTRL(MX25_PAD_UART1_RXD__UART1_RXD, UART1_IN_PAD_CTRL), + NEW_PAD_CTRL(MX25_PAD_UART1_TXD__UART1_TXD, UART1_OUT_PAD_CTRL), + NEW_PAD_CTRL(MX25_PAD_UART1_RTS__UART1_RTS, UART1_OUT_PAD_CTRL), + NEW_PAD_CTRL(MX25_PAD_UART1_CTS__UART1_CTS, UART1_IN_PAD_CTRL), + }; + + imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); +} +#else +#define tx25_uart1_init() #endif + +int board_init() +{ + tx25_uart1_init(); + /* board id for linux */ gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; return 0; diff --git a/board/nokia/rx51/rx51.c b/board/nokia/rx51/rx51.c index 48eb65f..42bf8b6 100644 --- a/board/nokia/rx51/rx51.c +++ b/board/nokia/rx51/rx51.c @@ -332,10 +332,10 @@ void *video_hw_init(void) static void twl4030_regulator_set_mode(u8 id, u8 mode) { u16 msg = MSG_SINGULAR(DEV_GRP_P1, id, mode); - twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, msg >> 8, - TWL4030_PM_MASTER_PB_WORD_MSB); - twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, msg & 0xff, - TWL4030_PM_MASTER_PB_WORD_LSB); + twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, + TWL4030_PM_MASTER_PB_WORD_MSB, msg >> 8); + twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, + TWL4030_PM_MASTER_PB_WORD_LSB, msg & 0xff); } static void omap3_emu_romcode_call(u32 service_id, u32 *parameters) @@ -406,12 +406,12 @@ int misc_init_r(void) TWL4030_PM_RECEIVER_DEV_GRP_P1); /* store I2C access state */ - twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER, &state, - TWL4030_PM_MASTER_PB_CFG); + twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER, TWL4030_PM_MASTER_PB_CFG, + &state); /* enable I2C access to powerbus (needed for twl4030 regulator) */ - twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, 0x02, - TWL4030_PM_MASTER_PB_CFG); + twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, TWL4030_PM_MASTER_PB_CFG, + 0x02); /* set VAUX3, VSIM and VMMC1 state to active - enable eMMC memory */ twl4030_regulator_set_mode(RES_VAUX3, RES_STATE_ACTIVE); @@ -419,8 +419,8 @@ int misc_init_r(void) twl4030_regulator_set_mode(RES_VMMC1, RES_STATE_ACTIVE); /* restore I2C access state */ - twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, state, - TWL4030_PM_MASTER_PB_CFG); + twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, TWL4030_PM_MASTER_PB_CFG, + state); /* set env variable attkernaddr for relocated kernel */ sprintf(buf, "%#x", KERNEL_ADDRESS); @@ -475,14 +475,14 @@ void hw_watchdog_reset(void) return; /* read actual watchdog timeout */ - twl4030_i2c_read_u8(TWL4030_CHIP_PM_RECEIVER, &timeout, - TWL4030_PM_RECEIVER_WATCHDOG_CFG); + twl4030_i2c_read_u8(TWL4030_CHIP_PM_RECEIVER, + TWL4030_PM_RECEIVER_WATCHDOG_CFG, &timeout); /* timeout 0 means watchdog is disabled */ /* reset watchdog timeout to 31s (maximum) */ if (timeout != 0) - twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 31, - TWL4030_PM_RECEIVER_WATCHDOG_CFG); + twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, + TWL4030_PM_RECEIVER_WATCHDOG_CFG, 31); /* store last watchdog reset time */ twl_wd_time = get_timer(0); @@ -531,8 +531,8 @@ int rx51_kp_init(void) { int ret = 0; u8 ctrl; - ret = twl4030_i2c_read_u8(TWL4030_CHIP_KEYPAD, &ctrl, - TWL4030_KEYPAD_KEYP_CTRL_REG); + ret = twl4030_i2c_read_u8(TWL4030_CHIP_KEYPAD, + TWL4030_KEYPAD_KEYP_CTRL_REG, &ctrl); if (ret) return ret; @@ -541,18 +541,18 @@ int rx51_kp_init(void) ctrl |= TWL4030_KEYPAD_CTRL_KBD_ON; ctrl |= TWL4030_KEYPAD_CTRL_SOFT_NRST; ctrl |= TWL4030_KEYPAD_CTRL_SOFTMODEN; - ret |= twl4030_i2c_write_u8(TWL4030_CHIP_KEYPAD, ctrl, - TWL4030_KEYPAD_KEYP_CTRL_REG); + ret |= twl4030_i2c_write_u8(TWL4030_CHIP_KEYPAD, + TWL4030_KEYPAD_KEYP_CTRL_REG, ctrl); /* enable key event status */ - ret |= twl4030_i2c_write_u8(TWL4030_CHIP_KEYPAD, 0xfe, - TWL4030_KEYPAD_KEYP_IMR1); + ret |= twl4030_i2c_write_u8(TWL4030_CHIP_KEYPAD, + TWL4030_KEYPAD_KEYP_IMR1, 0xfe); /* enable interrupt generation on rising and falling */ /* this is a workaround for qemu twl4030 emulation */ - ret |= twl4030_i2c_write_u8(TWL4030_CHIP_KEYPAD, 0x57, - TWL4030_KEYPAD_KEYP_EDR); + ret |= twl4030_i2c_write_u8(TWL4030_CHIP_KEYPAD, + TWL4030_KEYPAD_KEYP_EDR, 0x57); /* enable ISR clear on read */ - ret |= twl4030_i2c_write_u8(TWL4030_CHIP_KEYPAD, 0x05, - TWL4030_KEYPAD_KEYP_SIH_CTRL); + ret |= twl4030_i2c_write_u8(TWL4030_CHIP_KEYPAD, + TWL4030_KEYPAD_KEYP_SIH_CTRL, 0x05); return 0; } @@ -615,8 +615,8 @@ int rx51_kp_tstc(void) for (i = 0; i < 2; i++) { /* check interrupt register for events */ - twl4030_i2c_read_u8(TWL4030_CHIP_KEYPAD, &intr, - TWL4030_KEYPAD_KEYP_ISR1+(2*i)); + twl4030_i2c_read_u8(TWL4030_CHIP_KEYPAD, + TWL4030_KEYPAD_KEYP_ISR1 + (2 * i), &intr); /* no event */ if (!(intr&1)) diff --git a/board/nvidia/beaver/Makefile b/board/nvidia/beaver/Makefile new file mode 100644 index 0000000..9510f60 --- /dev/null +++ b/board/nvidia/beaver/Makefile @@ -0,0 +1,38 @@ +# +# Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved. +# +# This program is free software; you can redistribute it and/or modify it +# under the terms and conditions of the GNU General Public License, +# version 2, as published by the Free Software Foundation. +# +# This program is distributed in the hope it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +# more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +include $(TOPDIR)/config.mk + +$(shell mkdir -p $(obj)../cardhu) + +LIB = $(obj)lib$(BOARD).o + +COBJS = ../cardhu/cardhu.o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/olimex/mx23_olinuxino/spl_boot.c b/board/olimex/mx23_olinuxino/spl_boot.c index a96c293..6ba8c86 100644 --- a/board/olimex/mx23_olinuxino/spl_boot.c +++ b/board/olimex/mx23_olinuxino/spl_boot.c @@ -29,8 +29,8 @@ #include <asm/arch/imx-regs.h> #include <asm/arch/sys_proto.h> -#define MUX_CONFIG_EMI (MXS_PAD_3V3 | MXS_PAD_16MA | MXS_PAD_PULLUP) -#define MUX_CONFIG_SSP (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP) +#define MUX_CONFIG_EMI (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_PULLUP) +#define MUX_CONFIG_SSP (MXS_PAD_8MA | MXS_PAD_PULLUP) const iomux_cfg_t iomux_setup[] = { /* DUART */ diff --git a/board/pandora/pandora.c b/board/pandora/pandora.c index 9ff5dd7..5f0c58d 100644 --- a/board/pandora/pandora.c +++ b/board/pandora/pandora.c @@ -114,8 +114,9 @@ int misc_init_r(void) /* Enable battery backup capacitor (3.2V, 0.5mA charge current) */ twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, + TWL4030_PM_RECEIVER_BB_CFG, TWL4030_BB_CFG_BBCHEN | TWL4030_BB_CFG_BBSEL_3200MV | - TWL4030_BB_CFG_BBISEL_500UA, TWL4030_PM_RECEIVER_BB_CFG); + TWL4030_BB_CFG_BBISEL_500UA); dieid_num_r(); diff --git a/board/syteco/zmx25/zmx25.c b/board/syteco/zmx25/zmx25.c index 4f37c59..087d856 100644 --- a/board/syteco/zmx25/zmx25.c +++ b/board/syteco/zmx25/zmx25.c @@ -32,91 +32,85 @@ #include <asm/gpio.h> #include <asm/io.h> #include <asm/arch/imx-regs.h> -#include <asm/arch/imx25-pinmux.h> -#include <asm/arch/sys_proto.h> +#include <asm/arch/iomux-mx25.h> DECLARE_GLOBAL_DATA_PTR; int board_init() { - struct iomuxc_mux_ctl *muxctl; - struct iomuxc_pad_ctl *padctl; - struct iomuxc_pad_input_select *inputselect; - u32 gpio_mux_mode0_sion = MX25_PIN_MUX_MODE(0) | MX25_PIN_MUX_SION; - u32 gpio_mux_mode1 = MX25_PIN_MUX_MODE(1); - u32 gpio_mux_mode5 = MX25_PIN_MUX_MODE(5); - u32 gpio_mux_mode6 = MX25_PIN_MUX_MODE(6); - u32 input_select1 = MX25_PAD_INPUT_SELECT_DAISY(1); - u32 input_select2 = MX25_PAD_INPUT_SELECT_DAISY(2); + static const iomux_v3_cfg_t sdhc1_pads[] = { + NEW_PAD_CTRL(MX25_PAD_SD1_CMD__SD1_CMD, NO_PAD_CTRL), + NEW_PAD_CTRL(MX25_PAD_SD1_CLK__SD1_CLK, NO_PAD_CTRL), + NEW_PAD_CTRL(MX25_PAD_SD1_DATA0__SD1_DATA0, NO_PAD_CTRL), + NEW_PAD_CTRL(MX25_PAD_SD1_DATA1__SD1_DATA1, NO_PAD_CTRL), + NEW_PAD_CTRL(MX25_PAD_SD1_DATA2__SD1_DATA2, NO_PAD_CTRL), + NEW_PAD_CTRL(MX25_PAD_SD1_DATA3__SD1_DATA3, NO_PAD_CTRL), + }; + + static const iomux_v3_cfg_t dig_out_pads[] = { + MX25_PAD_CSI_D8__GPIO_1_7, /* Ouput 1 Ctrl */ + MX25_PAD_CSI_D7__GPIO_1_6, /* Ouput 2 Ctrl */ + NEW_PAD_CTRL(MX25_PAD_CSI_D6__GPIO_1_31, 0), /* Ouput 1 Stat */ + NEW_PAD_CTRL(MX25_PAD_CSI_D5__GPIO_1_30, 0), /* Ouput 2 Stat */ + }; + + static const iomux_v3_cfg_t led_pads[] = { + MX25_PAD_CSI_D9__GPIO_4_21, + MX25_PAD_CSI_D4__GPIO_1_29, + }; + + static const iomux_v3_cfg_t can_pads[] = { + NEW_PAD_CTRL(MX25_PAD_GPIO_A__CAN1_TX, NO_PAD_CTRL), + NEW_PAD_CTRL(MX25_PAD_GPIO_B__CAN1_RX, NO_PAD_CTRL), + NEW_PAD_CTRL(MX25_PAD_GPIO_C__CAN2_TX, NO_PAD_CTRL), + NEW_PAD_CTRL(MX25_PAD_GPIO_D__CAN2_RX, NO_PAD_CTRL), + }; + + static const iomux_v3_cfg_t i2c3_pads[] = { + MX25_PAD_CSPI1_SS1__I2C3_DAT, + MX25_PAD_GPIO_E__I2C3_CLK, + }; icache_enable(); - muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE; - padctl = (struct iomuxc_pad_ctl *)IMX_IOPADCTL_BASE; - inputselect = (struct iomuxc_pad_input_select *)IMX_IOPADINPUTSEL_BASE; - - /* Setup of core volatage selection pin to run at 1.4V */ - writel(gpio_mux_mode5, &muxctl->pad_ext_armclk); /* VCORE GPIO3[15] */ + /* Setup of core voltage selection pin to run at 1.4V */ + imx_iomux_v3_setup_pad(MX25_PAD_EXT_ARMCLK__GPIO_3_15); /* VCORE */ gpio_direction_output(IMX_GPIO_NR(3, 15), 1); - /* Setup of input daisy chains for SD card pins*/ - writel(gpio_mux_mode0_sion, &muxctl->pad_sd1_cmd); - writel(gpio_mux_mode0_sion, &muxctl->pad_sd1_clk); - writel(gpio_mux_mode0_sion, &muxctl->pad_sd1_data0); - writel(gpio_mux_mode0_sion, &muxctl->pad_sd1_data1); - writel(gpio_mux_mode0_sion, &muxctl->pad_sd1_data2); - writel(gpio_mux_mode0_sion, &muxctl->pad_sd1_data3); + /* Setup of SD card pins*/ + imx_iomux_v3_setup_multiple_pads(sdhc1_pads, ARRAY_SIZE(sdhc1_pads)); /* Setup of digital output for USB power and OC */ - writel(gpio_mux_mode5, &muxctl->pad_csi_d3); /* USB Power GPIO1[28] */ + imx_iomux_v3_setup_pad(MX25_PAD_CSI_D3__GPIO_1_28); /* USB Power */ gpio_direction_output(IMX_GPIO_NR(1, 28), 1); - writel(gpio_mux_mode5, &muxctl->pad_csi_d2); /* USB OC GPIO1[27] */ + imx_iomux_v3_setup_pad(MX25_PAD_CSI_D2__GPIO_1_27); /* USB OC */ gpio_direction_input(IMX_GPIO_NR(1, 18)); /* Setup of digital output control pins */ - writel(gpio_mux_mode5, &muxctl->pad_csi_d8); /* Ouput 1 Ctrl GPIO1[7] */ - writel(gpio_mux_mode5, &muxctl->pad_csi_d7); /* Ouput 2 Ctrl GPIO1[6] */ - writel(gpio_mux_mode5, &muxctl->pad_csi_d6); /* Ouput 1 Stat GPIO1[31]*/ - writel(gpio_mux_mode5, &muxctl->pad_csi_d5); /* Ouput 2 Stat GPIO1[30]*/ - - writel(0, &padctl->pad_csi_d6); /* Ouput 1 Stat pull up off */ - writel(0, &padctl->pad_csi_d5); /* Ouput 2 Stat pull up off */ + imx_iomux_v3_setup_multiple_pads(dig_out_pads, + ARRAY_SIZE(dig_out_pads)); /* Switch both output drivers off */ gpio_direction_output(IMX_GPIO_NR(1, 7), 0); gpio_direction_output(IMX_GPIO_NR(1, 6), 0); - /* Setup of key input pin GPIO2[29]*/ - writel(gpio_mux_mode5 | MX25_PIN_MUX_SION, &muxctl->pad_kpp_row0); - writel(0, &padctl->pad_kpp_row0); /* Key pull up off */ + /* Setup of key input pin */ + imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX25_PAD_KPP_ROW0__GPIO_2_29, 0)); gpio_direction_input(IMX_GPIO_NR(2, 29)); /* Setup of status LED outputs */ - writel(gpio_mux_mode5, &muxctl->pad_csi_d9); /* GPIO4[21] */ - writel(gpio_mux_mode5, &muxctl->pad_csi_d4); /* GPIO1[29] */ + imx_iomux_v3_setup_multiple_pads(led_pads, ARRAY_SIZE(led_pads)); /* Switch both LEDs off */ gpio_direction_output(IMX_GPIO_NR(4, 21), 0); gpio_direction_output(IMX_GPIO_NR(1, 29), 0); /* Setup of CAN1 and CAN2 signals */ - writel(gpio_mux_mode6, &muxctl->pad_gpio_a); /* CAN1 TX */ - writel(gpio_mux_mode6, &muxctl->pad_gpio_b); /* CAN1 RX */ - writel(gpio_mux_mode6, &muxctl->pad_gpio_c); /* CAN2 TX */ - writel(gpio_mux_mode6, &muxctl->pad_gpio_d); /* CAN2 RX */ - - /* Setup of input daisy chains for CAN signals*/ - writel(input_select1, &inputselect->can1_ipp_ind_canrx); /* CAN1 RX */ - writel(input_select1, &inputselect->can2_ipp_ind_canrx); /* CAN2 RX */ + imx_iomux_v3_setup_multiple_pads(can_pads, ARRAY_SIZE(can_pads)); /* Setup of I2C3 signals */ - writel(gpio_mux_mode1, &muxctl->pad_cspi1_ss1); /* I2C3 SDA */ - writel(gpio_mux_mode1, &muxctl->pad_gpio_e); /* I2C3 SCL */ - - /* Setup of input daisy chains for I2C3 signals*/ - writel(input_select1, &inputselect->i2c3_ipp_sda_in); /* I2C3 SDA */ - writel(input_select2, &inputselect->i2c3_ipp_scl_in); /* I2C3 SCL */ + imx_iomux_v3_setup_multiple_pads(i2c3_pads, ARRAY_SIZE(i2c3_pads)); gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; @@ -128,25 +122,32 @@ int board_late_init(void) const char *e; #ifdef CONFIG_FEC_MXC - struct iomuxc_mux_ctl *muxctl; - u32 gpio_mux_mode2 = MX25_PIN_MUX_MODE(2); - u32 gpio_mux_mode5 = MX25_PIN_MUX_MODE(5); - - /* - * fec pin init is generic - */ - mx25_fec_init_pins(); - - /* - * Set up LAN-RESET and FEC_RX_ERR - * - * LAN-RESET: GPIO3[16] is ALT 5 mode of pin U20 - * FEC_RX_ERR: FEC_RX_ERR is ALT 2 mode of pin R2 - */ - muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE; - - writel(gpio_mux_mode5, &muxctl->pad_upll_bypclk); - writel(gpio_mux_mode2, &muxctl->pad_uart2_cts); +/* + * FIXME: need to revisit this + * The original code enabled PUE and 100-k pull-down without PKE, so the right + * value here is likely: + * 0 for no pull + * or: + * PAD_CTL_PUS_100K_DOWN for 100-k pull-down + */ +#define FEC_OUT_PAD_CTRL 0 + + static const iomux_v3_cfg_t fec_pads[] = { + MX25_PAD_FEC_TX_CLK__FEC_TX_CLK, + MX25_PAD_FEC_RX_DV__FEC_RX_DV, + MX25_PAD_FEC_RDATA0__FEC_RDATA0, + NEW_PAD_CTRL(MX25_PAD_FEC_TDATA0__FEC_TDATA0, FEC_OUT_PAD_CTRL), + NEW_PAD_CTRL(MX25_PAD_FEC_TX_EN__FEC_TX_EN, FEC_OUT_PAD_CTRL), + NEW_PAD_CTRL(MX25_PAD_FEC_MDC__FEC_MDC, FEC_OUT_PAD_CTRL), + MX25_PAD_FEC_MDIO__FEC_MDIO, + MX25_PAD_FEC_RDATA1__FEC_RDATA1, + NEW_PAD_CTRL(MX25_PAD_FEC_TDATA1__FEC_TDATA1, FEC_OUT_PAD_CTRL), + + MX25_PAD_UPLL_BYPCLK__GPIO_3_16, /* LAN-RESET */ + MX25_PAD_UART2_CTS__FEC_RX_ER, /* FEC_RX_ERR */ + }; + + imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads)); /* assert PHY reset (low) */ gpio_direction_output(IMX_GPIO_NR(3, 16), 0); diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c index 3d9b6dd..c686f40 100644 --- a/board/ti/beagle/beagle.c +++ b/board/ti/beagle/beagle.c @@ -108,13 +108,14 @@ int board_init(void) /* * Routine: get_board_revision * Description: Detect if we are running on a Beagle revision Ax/Bx, - * C1/2/3, C4 or xM. This can be done by reading + * C1/2/3, C4, xM Ax/Bx or xM Cx. This can be done by reading * the level of GPIO173, GPIO172 and GPIO171. This should * result in * GPIO173, GPIO172, GPIO171: 1 1 1 => Ax/Bx * GPIO173, GPIO172, GPIO171: 1 1 0 => C1/2/3 * GPIO173, GPIO172, GPIO171: 1 0 1 => C4 - * GPIO173, GPIO172, GPIO171: 0 0 0 => xM + * GPIO173, GPIO172, GPIO171: 0 1 0 => xM Cx + * GPIO173, GPIO172, GPIO171: 0 0 0 => xM Ax/Bx */ static int get_board_revision(void) { diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c index 7bbb549..bf7e091 100644 --- a/board/ti/dra7xx/evm.c +++ b/board/ti/dra7xx/evm.c @@ -27,7 +27,7 @@ * MA 02111-1307 USA */ #include <common.h> -#include <twl6035.h> +#include <palmas.h> #include <asm/arch/sys_proto.h> #include <asm/arch/mmc_host_def.h> diff --git a/board/ti/omap5_uevm/evm.c b/board/ti/omap5_uevm/evm.c index 55337c0..46db1bf 100644 --- a/board/ti/omap5_uevm/evm.c +++ b/board/ti/omap5_uevm/evm.c @@ -23,7 +23,7 @@ * MA 02111-1307 USA */ #include <common.h> -#include <twl6035.h> +#include <palmas.h> #include <asm/arch/sys_proto.h> #include <asm/arch/mmc_host_def.h> @@ -63,8 +63,8 @@ int board_eth_init(bd_t *bis) */ int misc_init_r(void) { -#ifdef CONFIG_TWL6035_POWER - twl6035_init_settings(); +#ifdef CONFIG_PALMAS_POWER + palmas_init_settings(); #endif return 0; } diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c index cab0598..2bbe392 100644 --- a/board/ti/panda/panda.c +++ b/board/ti/panda/panda.c @@ -82,6 +82,12 @@ int misc_init_r(void) if (omap_revision() == OMAP4430_ES1_0) return 0; +#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + if (omap_revision() >= OMAP4460_ES1_0 || + omap_revision() <= OMAP4460_ES1_1) + setenv("board_name", strcat(CONFIG_SYS_BOARD, "-es")); +#endif + gpio_direction_input(PANDA_ULPI_PHY_TYPE_GPIO); phy_type = gpio_get_value(PANDA_ULPI_PHY_TYPE_GPIO); diff --git a/board/ti/ti814x/evm.c b/board/ti/ti814x/evm.c index 446e36b..7adb524 100644 --- a/board/ti/ti814x/evm.c +++ b/board/ti/ti814x/evm.c @@ -17,6 +17,7 @@ */ #include <common.h> +#include <cpsw.h> #include <errno.h> #include <spl.h> #include <asm/arch/cpu.h> @@ -39,6 +40,8 @@ static struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE; static struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE; #endif +static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; + /* UART Defines */ #ifdef CONFIG_SPL_BUILD #define UART_RESET (0x1 << 1) @@ -151,6 +154,9 @@ void s_init(void) */ wdt_disable(); + /* Enable timer */ + timer_init(); + /* Setup the PLLs and the clocks for the peripherals */ pll_init(); @@ -163,6 +169,9 @@ void s_init(void) /* Set MMC pins */ enable_mmc1_pin_mux(); + /* Set Ethernet pins */ + enable_enet_pin_mux(); + /* Enable UART */ uart_enable(); @@ -196,3 +205,69 @@ int board_mmc_init(bd_t *bis) return 0; } #endif + +#ifdef CONFIG_DRIVER_TI_CPSW +static void cpsw_control(int enabled) +{ + /* VTP can be added here */ + + return; +} + +static struct cpsw_slave_data cpsw_slaves[] = { + { + .slave_reg_ofs = 0x50, + .sliver_reg_ofs = 0x700, + .phy_id = 1, + }, + { + .slave_reg_ofs = 0x90, + .sliver_reg_ofs = 0x740, + .phy_id = 0, + }, +}; + +static struct cpsw_platform_data cpsw_data = { + .mdio_base = CPSW_MDIO_BASE, + .cpsw_base = CPSW_BASE, + .mdio_div = 0xff, + .channels = 8, + .cpdma_reg_ofs = 0x100, + .slaves = 1, + .slave_data = cpsw_slaves, + .ale_reg_ofs = 0x600, + .ale_entries = 1024, + .host_port_reg_ofs = 0x28, + .hw_stats_reg_ofs = 0x400, + .mac_control = (1 << 5), + .control = cpsw_control, + .host_port_num = 0, + .version = CPSW_CTRL_VERSION_1, +}; +#endif + +int board_eth_init(bd_t *bis) +{ + uint8_t mac_addr[6]; + uint32_t mac_hi, mac_lo; + + if (!eth_getenv_enetaddr("ethaddr", mac_addr)) { + printf("<ethaddr> not set. Reading from E-fuse\n"); + /* try reading mac address from efuse */ + mac_lo = readl(&cdev->macid0l); + mac_hi = readl(&cdev->macid0h); + mac_addr[0] = mac_hi & 0xFF; + mac_addr[1] = (mac_hi & 0xFF00) >> 8; + mac_addr[2] = (mac_hi & 0xFF0000) >> 16; + mac_addr[3] = (mac_hi & 0xFF000000) >> 24; + mac_addr[4] = mac_lo & 0xFF; + mac_addr[5] = (mac_lo & 0xFF00) >> 8; + + if (is_valid_ether_addr(mac_addr)) + eth_setenv_enetaddr("ethaddr", mac_addr); + else + printf("Unable to read MAC address. Set <ethaddr>\n"); + } + + return cpsw_register(&cpsw_data); +} diff --git a/board/ti/ti814x/evm.h b/board/ti/ti814x/evm.h index 40f8710..6aebec6 100644 --- a/board/ti/ti814x/evm.h +++ b/board/ti/ti814x/evm.h @@ -3,5 +3,6 @@ void enable_uart0_pin_mux(void); void enable_mmc1_pin_mux(void); +void enable_enet_pin_mux(void); #endif /* _EVM_H */ diff --git a/board/ti/ti814x/mux.c b/board/ti/ti814x/mux.c index 137acb4..fd9f364 100644 --- a/board/ti/ti814x/mux.c +++ b/board/ti/ti814x/mux.c @@ -40,6 +40,36 @@ static struct module_pin_mux mmc1_pin_mux[] = { {-1}, }; +static struct module_pin_mux enet_pin_mux[] = { + {OFFSET(pincntl232), MODE(0x01)}, /* EMAC_RMREFCLK */ + {OFFSET(pincntl233), PULLUP_EN | MODE(0x01)}, /* MDCLK */ + {OFFSET(pincntl234), PULLUP_EN | MODE(0x01)}, /* MDIO */ + {OFFSET(pincntl235), MODE(0x01)}, /* EMAC[0]_MTCLK */ + {OFFSET(pincntl236), MODE(0x01)}, /* EMAC[0]_MCOL */ + {OFFSET(pincntl237), MODE(0x01)}, /* EMAC[0]_MCRS */ + {OFFSET(pincntl238), MODE(0x01)}, /* EMAC[0]_MRXER */ + {OFFSET(pincntl239), MODE(0x01)}, /* EMAC[0]_MRCLK */ + {OFFSET(pincntl240), MODE(0x01)}, /* EMAC[0]_MRXD[0] */ + {OFFSET(pincntl241), MODE(0x01)}, /* EMAC[0]_MRXD[1] */ + {OFFSET(pincntl242), MODE(0x01)}, /* EMAC[0]_MRXD[2] */ + {OFFSET(pincntl243), MODE(0x01)}, /* EMAC[0]_MRXD[3] */ + {OFFSET(pincntl244), MODE(0x01)}, /* EMAC[0]_MRXD[4] */ + {OFFSET(pincntl245), MODE(0x01)}, /* EMAC[0]_MRXD[5] */ + {OFFSET(pincntl246), MODE(0x01)}, /* EMAC[0]_MRXD[6] */ + {OFFSET(pincntl247), MODE(0x01)}, /* EMAC[0]_MRXD[7] */ + {OFFSET(pincntl248), MODE(0x01)}, /* EMAC[0]_MRXDV */ + {OFFSET(pincntl249), MODE(0x01)}, /* EMAC[0]_GMTCLK */ + {OFFSET(pincntl250), MODE(0x01)}, /* EMAC[0]_MTXD[0] */ + {OFFSET(pincntl251), MODE(0x01)}, /* EMAC[0]_MTXD[1] */ + {OFFSET(pincntl252), MODE(0x01)}, /* EMAC[0]_MTXD[2] */ + {OFFSET(pincntl253), MODE(0x01)}, /* EMAC[0]_MTXD[3] */ + {OFFSET(pincntl254), MODE(0x01)}, /* EMAC[0]_MTXD[4] */ + {OFFSET(pincntl255), MODE(0x01)}, /* EMAC[0]_MTXD[5] */ + {OFFSET(pincntl256), MODE(0x01)}, /* EMAC[0]_MTXD[6] */ + {OFFSET(pincntl257), MODE(0x01)}, /* EMAC[0]_MTXD[7] */ + {OFFSET(pincntl258), MODE(0x01)}, /* EMAC[0]_MTXEN */ +}; + void enable_uart0_pin_mux(void) { configure_module_pin_mux(uart0_pin_mux); @@ -49,3 +79,8 @@ void enable_mmc1_pin_mux(void) { configure_module_pin_mux(mmc1_pin_mux); } + +void enable_enet_pin_mux(void) +{ + configure_module_pin_mux(enet_pin_mux); +} diff --git a/board/ttcontrol/vision2/vision2.c b/board/ttcontrol/vision2/vision2.c index a471fec..9cc758a 100644 --- a/board/ttcontrol/vision2/vision2.c +++ b/board/ttcontrol/vision2/vision2.c @@ -26,10 +26,9 @@ #include <common.h> #include <asm/io.h> #include <asm/arch/imx-regs.h> -#include <asm/arch/mx5x_pins.h> #include <asm/arch/crm_regs.h> #include <asm/arch/clock.h> -#include <asm/arch/iomux.h> +#include <asm/arch/iomux-mx51.h> #include <asm/gpio.h> #include <asm/arch/sys_proto.h> #include <i2c.h> @@ -68,85 +67,67 @@ void hw_watchdog_reset(void) int val; /* toggle watchdog trigger pin */ - val = gpio_get_value(66); + val = gpio_get_value(IMX_GPIO_NR(3, 2)); val = val ? 0 : 1; - gpio_set_value(66, val); + gpio_set_value(IMX_GPIO_NR(3, 2), val); } #endif static void init_drive_strength(void) { - mxc_iomux_set_pad(MX51_PIN_CTL_GRP_PKEDDR, PAD_CTL_DDR_INPUT_CMOS); - mxc_iomux_set_pad(MX51_PIN_CTL_GRP_PKEADDR, PAD_CTL_PKE_ENABLE); - mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDRAPKS, PAD_CTL_PUE_KEEPER); - mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDRAPUS, PAD_CTL_100K_PU); - mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_A1, PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_A0, PAD_CTL_DRV_HIGH); - mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_A1, PAD_CTL_DRV_HIGH); - mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_RAS, - PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_CAS, - PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_CTL_GRP_PKEDDR, PAD_CTL_PKE_ENABLE); - mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDRPKS, PAD_CTL_PUE_KEEPER); - mxc_iomux_set_pad(MX51_PIN_CTL_GRP_HYSDDR0, PAD_CTL_HYS_NONE); - mxc_iomux_set_pad(MX51_PIN_CTL_GRP_HYSDDR1, PAD_CTL_HYS_NONE); - mxc_iomux_set_pad(MX51_PIN_CTL_GRP_HYSDDR2, PAD_CTL_HYS_NONE); - mxc_iomux_set_pad(MX51_PIN_CTL_GRP_HYSDDR3, PAD_CTL_HYS_NONE); - mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_B0, PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_B1, PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_B2, PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_B4, PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDRPUS, PAD_CTL_100K_PU); - mxc_iomux_set_pad(MX51_PIN_CTL_GRP_INMODE1, PAD_CTL_DDR_INPUT_CMOS); - mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DRAM_B0, PAD_CTL_DRV_MEDIUM); - mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DRAM_B1, PAD_CTL_DRV_MEDIUM); - mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DRAM_B2, PAD_CTL_DRV_MEDIUM); - mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DRAM_B4, PAD_CTL_DRV_MEDIUM); - - /* Setting pad options */ - mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDWE, - PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | - PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDCKE0, - PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | - PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDCKE1, - PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | - PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDCLK, - PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | - PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDQS0, - PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | - PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDQS1, - PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | - PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDQS2, - PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | - PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDQS3, - PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | - PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_CS0, - PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | - PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_CS1, - PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | - PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_DQM0, - PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | - PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_DQM1, - PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | - PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_DQM2, - PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | - PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_DQM3, - PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | - PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST); + static const iomux_v3_cfg_t ddr_pads[] = { + NEW_PAD_CTRL(MX51_GRP_PKEDDR, 0), + NEW_PAD_CTRL(MX51_GRP_PKEADDR, PAD_CTL_PKE), + NEW_PAD_CTRL(MX51_GRP_DDRAPKS, 0), + NEW_PAD_CTRL(MX51_GRP_DDRAPUS, PAD_CTL_PUS_100K_UP), + NEW_PAD_CTRL(MX51_GRP_DDR_SR_A1, PAD_CTL_SRE_FAST), + NEW_PAD_CTRL(MX51_GRP_DDR_A0, PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX51_GRP_DDR_A1, PAD_CTL_DSE_HIGH), + NEW_PAD_CTRL(MX51_PAD_DRAM_RAS__DRAM_RAS, + PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST), + NEW_PAD_CTRL(MX51_PAD_DRAM_CAS__DRAM_CAS, + PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST), + NEW_PAD_CTRL(MX51_GRP_PKEDDR, PAD_CTL_PKE), + NEW_PAD_CTRL(MX51_GRP_DDRPKS, 0), + NEW_PAD_CTRL(MX51_GRP_HYSDDR0, 0), + NEW_PAD_CTRL(MX51_GRP_HYSDDR1, 0), + NEW_PAD_CTRL(MX51_GRP_HYSDDR2, 0), + NEW_PAD_CTRL(MX51_GRP_HYSDDR3, 0), + NEW_PAD_CTRL(MX51_GRP_DRAM_SR_B0, PAD_CTL_SRE_FAST), + NEW_PAD_CTRL(MX51_GRP_DRAM_SR_B1, PAD_CTL_SRE_FAST), + NEW_PAD_CTRL(MX51_GRP_DRAM_SR_B2, PAD_CTL_SRE_FAST), + NEW_PAD_CTRL(MX51_GRP_DRAM_SR_B4, PAD_CTL_SRE_FAST), + NEW_PAD_CTRL(MX51_GRP_DDRPUS, PAD_CTL_PUS_100K_UP), + NEW_PAD_CTRL(MX51_GRP_INMODE1, 0), + NEW_PAD_CTRL(MX51_GRP_DRAM_B0, PAD_CTL_DSE_MED), + NEW_PAD_CTRL(MX51_GRP_DRAM_B1, PAD_CTL_DSE_MED), + NEW_PAD_CTRL(MX51_GRP_DRAM_B2, PAD_CTL_DSE_MED), + NEW_PAD_CTRL(MX51_GRP_DRAM_B4, PAD_CTL_DSE_MED), + + NEW_PAD_CTRL(MX51_PAD_DRAM_SDWE__DRAM_SDWE, MX51_GPIO_PAD_CTRL), + NEW_PAD_CTRL(MX51_PAD_DRAM_SDCKE0__DRAM_SDCKE0, + MX51_GPIO_PAD_CTRL), + NEW_PAD_CTRL(MX51_PAD_DRAM_SDCKE1__DRAM_SDCKE1, + MX51_GPIO_PAD_CTRL), + NEW_PAD_CTRL(MX51_PAD_DRAM_SDCLK__DRAM_SDCLK, + MX51_GPIO_PAD_CTRL), + NEW_PAD_CTRL(MX51_PAD_DRAM_SDQS0__DRAM_SDQS0, + MX51_GPIO_PAD_CTRL), + NEW_PAD_CTRL(MX51_PAD_DRAM_SDQS1__DRAM_SDQS1, + MX51_GPIO_PAD_CTRL), + NEW_PAD_CTRL(MX51_PAD_DRAM_SDQS2__DRAM_SDQS2, + MX51_GPIO_PAD_CTRL), + NEW_PAD_CTRL(MX51_PAD_DRAM_SDQS3__DRAM_SDQS3, + MX51_GPIO_PAD_CTRL), + NEW_PAD_CTRL(MX51_PAD_DRAM_CS0__DRAM_CS0, MX51_GPIO_PAD_CTRL), + NEW_PAD_CTRL(MX51_PAD_DRAM_CS1__DRAM_CS1, MX51_GPIO_PAD_CTRL), + NEW_PAD_CTRL(MX51_PAD_DRAM_DQM0__DRAM_DQM0, MX51_GPIO_PAD_CTRL), + NEW_PAD_CTRL(MX51_PAD_DRAM_DQM1__DRAM_DQM1, MX51_GPIO_PAD_CTRL), + NEW_PAD_CTRL(MX51_PAD_DRAM_DQM2__DRAM_DQM2, MX51_GPIO_PAD_CTRL), + NEW_PAD_CTRL(MX51_PAD_DRAM_DQM3__DRAM_DQM3, MX51_GPIO_PAD_CTRL), + }; + + imx_iomux_v3_setup_multiple_pads(ddr_pads, ARRAY_SIZE(ddr_pads)); } int dram_init(void) @@ -170,134 +151,102 @@ static void setup_weim(void) static void setup_uart(void) { - unsigned int pad = PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE | - PAD_CTL_PUE_PULL | PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST; - /* console RX on Pin EIM_D25 */ - mxc_request_iomux(MX51_PIN_EIM_D25, IOMUX_CONFIG_ALT3); - mxc_iomux_set_pad(MX51_PIN_EIM_D25, pad); - /* console TX on Pin EIM_D26 */ - mxc_request_iomux(MX51_PIN_EIM_D26, IOMUX_CONFIG_ALT3); - mxc_iomux_set_pad(MX51_PIN_EIM_D26, pad); + static const iomux_v3_cfg_t uart_pads[] = { + MX51_PAD_EIM_D25__UART3_RXD, /* console RX */ + MX51_PAD_EIM_D26__UART3_TXD, /* console TX */ + }; + + imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads)); } #ifdef CONFIG_MXC_SPI void spi_io_init(void) { - /* 000: Select mux mode: ALT0 mux port: MOSI of instance: ecspi1 */ - mxc_request_iomux(MX51_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_CSPI1_MOSI, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); - - /* 000: Select mux mode: ALT0 mux port: MISO of instance: ecspi1. */ - mxc_request_iomux(MX51_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_CSPI1_MISO, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); - - /* 000: Select mux mode: ALT0 mux port: SS0 of instance: ecspi1. */ - mxc_request_iomux(MX51_PIN_CSPI1_SS0, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_CSPI1_SS0, - PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE | - PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); - - /* - * SS1 will be used as GPIO because of uninterrupted - * long SPI transmissions (GPIO4_25) - */ - mxc_request_iomux(MX51_PIN_CSPI1_SS1, IOMUX_CONFIG_ALT3); - mxc_iomux_set_pad(MX51_PIN_CSPI1_SS1, - PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE | - PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); - - /* 000: Select mux mode: ALT0 mux port: SS2 of instance: ecspi1. */ - mxc_request_iomux(MX51_PIN_DI1_PIN11, IOMUX_CONFIG_ALT7); - mxc_iomux_set_pad(MX51_PIN_DI1_PIN11, - PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE | - PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); - - /* 000: Select mux mode: ALT0 mux port: SCLK of instance: ecspi1. */ - mxc_request_iomux(MX51_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_CSPI1_SCLK, - PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + static const iomux_v3_cfg_t spi_pads[] = { + NEW_PAD_CTRL(MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI, PAD_CTL_HYS | + PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST), + NEW_PAD_CTRL(MX51_PAD_CSPI1_MISO__ECSPI1_MISO, PAD_CTL_HYS | + PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST), + NEW_PAD_CTRL(MX51_PAD_CSPI1_SS0__ECSPI1_SS0, PAD_CTL_HYS | + PAD_CTL_PKE | PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST), + NEW_PAD_CTRL(MX51_PAD_CSPI1_SS1__ECSPI1_SS1, PAD_CTL_HYS | + PAD_CTL_PKE | PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST), + NEW_PAD_CTRL(MX51_PAD_DI1_PIN11__ECSPI1_SS2, PAD_CTL_HYS | + PAD_CTL_PKE | PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST), + NEW_PAD_CTRL(MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK, PAD_CTL_HYS | + PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST), + }; + + imx_iomux_v3_setup_multiple_pads(spi_pads, ARRAY_SIZE(spi_pads)); } static void reset_peripherals(int reset) { +#ifdef CONFIG_VISION2_HW_1_0 + static const iomux_v3_cfg_t fec_cfg_pads[] = { + /* RXD1 */ + NEW_PAD_CTRL(MX51_PAD_EIM_EB3__GPIO2_23, NO_PAD_CTRL), + /* RXD2 */ + NEW_PAD_CTRL(MX51_PAD_EIM_CS2__GPIO2_27, NO_PAD_CTRL), + /* RXD3 */ + NEW_PAD_CTRL(MX51_PAD_EIM_CS3__GPIO2_28, NO_PAD_CTRL), + /* RXER */ + NEW_PAD_CTRL(MX51_PAD_EIM_CS4__GPIO2_29, NO_PAD_CTRL), + /* COL */ + NEW_PAD_CTRL(MX51_PAD_NANDF_RB2__GPIO3_10, NO_PAD_CTRL), + /* RCLK */ + NEW_PAD_CTRL(MX51_PAD_NANDF_RB3__GPIO3_11, NO_PAD_CTRL), + /* RXD0 */ + NEW_PAD_CTRL(MX51_PAD_NANDF_D9__GPIO3_31, NO_PAD_CTRL), + }; + + static const iomux_v3_cfg_t fec_pads[] = { + NEW_PAD_CTRL(MX51_PAD_EIM_CS3__FEC_RDATA3, MX51_PAD_CTRL_2), + NEW_PAD_CTRL(MX51_PAD_EIM_CS2__FEC_RDATA2, MX51_PAD_CTRL_2), + NEW_PAD_CTRL(MX51_PAD_EIM_EB3__FEC_RDATA1, MX51_PAD_CTRL_2), + MX51_PAD_NANDF_D9__FEC_RDATA0, + NEW_PAD_CTRL(MX51_PAD_NANDF_RB3__FEC_RX_CLK, MX51_PAD_CTRL_4), + MX51_PAD_EIM_CS4__FEC_RX_ER, + NEW_PAD_CTRL(MX51_PAD_NANDF_RB2__FEC_COL, MX51_PAD_CTRL_4), + }; +#endif + if (reset) { /* reset_n is on NANDF_D15 */ - gpio_direction_output(89, 0); + gpio_direction_output(IMX_GPIO_NR(3, 25), 0); #ifdef CONFIG_VISION2_HW_1_0 /* * set FEC Configuration lines * set levels of FEC config lines */ - gpio_direction_output(75, 0); - gpio_direction_output(74, 1); - gpio_direction_output(95, 1); + gpio_direction_output(IMX_GPIO_NR(3, 11), 0); + gpio_direction_output(IMX_GPIO_NR(3, 10), 1); + gpio_direction_output(IMX_GPIO_NR(3, 31), 1); /* set direction of FEC config lines */ - gpio_direction_output(59, 0); - gpio_direction_output(60, 0); - gpio_direction_output(61, 0); - gpio_direction_output(55, 1); - - /* FEC_RXD1 - sel GPIO (2-23) for configuration -> 1 */ - mxc_request_iomux(MX51_PIN_EIM_EB3, IOMUX_CONFIG_ALT1); - /* FEC_RXD2 - sel GPIO (2-27) for configuration -> 0 */ - mxc_request_iomux(MX51_PIN_EIM_CS2, IOMUX_CONFIG_ALT1); - /* FEC_RXD3 - sel GPIO (2-28) for configuration -> 0 */ - mxc_request_iomux(MX51_PIN_EIM_CS3, IOMUX_CONFIG_ALT1); - /* FEC_RXER - sel GPIO (2-29) for configuration -> 0 */ - mxc_request_iomux(MX51_PIN_EIM_CS4, IOMUX_CONFIG_ALT1); - /* FEC_COL - sel GPIO (3-10) for configuration -> 1 */ - mxc_request_iomux(MX51_PIN_NANDF_RB2, IOMUX_CONFIG_ALT3); - /* FEC_RCLK - sel GPIO (3-11) for configuration -> 0 */ - mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_ALT3); - /* FEC_RXD0 - sel GPIO (3-31) for configuration -> 1 */ - mxc_request_iomux(MX51_PIN_NANDF_D9, IOMUX_CONFIG_ALT3); + gpio_direction_output(IMX_GPIO_NR(2, 27), 0); + gpio_direction_output(IMX_GPIO_NR(2, 28), 0); + gpio_direction_output(IMX_GPIO_NR(2, 29), 0); + gpio_direction_output(IMX_GPIO_NR(2, 23), 1); + + imx_iomux_v3_setup_multiple_pads(fec_cfg_pads, + ARRAY_SIZE(fec_cfg_pads)); #endif - /* - * activate reset_n pin - * Select mux mode: ALT3 mux port: NAND D15 - */ - mxc_request_iomux(MX51_PIN_NANDF_D15, IOMUX_CONFIG_ALT3); - mxc_iomux_set_pad(MX51_PIN_NANDF_D15, - PAD_CTL_DRV_VOT_HIGH | PAD_CTL_DRV_MAX); + /* activate reset_n pin */ + imx_iomux_v3_setup_pad( + NEW_PAD_CTRL(MX51_PAD_NANDF_D15__GPIO3_25, + PAD_CTL_DSE_MAX)); } else { /* set FEC Control lines */ - gpio_direction_input(89); + gpio_direction_input(IMX_GPIO_NR(3, 25)); udelay(500); #ifdef CONFIG_VISION2_HW_1_0 - /* FEC RDATA[3] */ - mxc_request_iomux(MX51_PIN_EIM_CS3, IOMUX_CONFIG_ALT3); - mxc_iomux_set_pad(MX51_PIN_EIM_CS3, 0x180); - - /* FEC RDATA[2] */ - mxc_request_iomux(MX51_PIN_EIM_CS2, IOMUX_CONFIG_ALT3); - mxc_iomux_set_pad(MX51_PIN_EIM_CS2, 0x180); - - /* FEC RDATA[1] */ - mxc_request_iomux(MX51_PIN_EIM_EB3, IOMUX_CONFIG_ALT3); - mxc_iomux_set_pad(MX51_PIN_EIM_EB3, 0x180); - - /* FEC RDATA[0] */ - mxc_request_iomux(MX51_PIN_NANDF_D9, IOMUX_CONFIG_ALT2); - mxc_iomux_set_pad(MX51_PIN_NANDF_D9, 0x2180); - - /* FEC RX_CLK */ - mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_ALT1); - mxc_iomux_set_pad(MX51_PIN_NANDF_RB3, 0x2180); - - /* FEC RX_ER */ - mxc_request_iomux(MX51_PIN_EIM_CS4, IOMUX_CONFIG_ALT3); - mxc_iomux_set_pad(MX51_PIN_EIM_CS4, 0x180); - - /* FEC COL */ - mxc_request_iomux(MX51_PIN_NANDF_RB2, IOMUX_CONFIG_ALT1); - mxc_iomux_set_pad(MX51_PIN_NANDF_RB2, 0x2180); + imx_iomux_v3_setup_multiple_pads(fec_pads, + ARRAY_SIZE(fec_pads)); #endif } } @@ -376,155 +325,94 @@ static void power_init_mx51(void) static void setup_gpios(void) { - unsigned int i; - - /* CAM_SUP_DISn, GPIO1_7 */ - mxc_request_iomux(MX51_PIN_GPIO1_7, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_GPIO1_7, 0x82); + static const iomux_v3_cfg_t gpio_pads_1[] = { + NEW_PAD_CTRL(MX51_PAD_GPIO1_7__GPIO1_7, PAD_CTL_PKE | + PAD_CTL_DSE_MED), /* CAM_SUP_DISn */ + NEW_PAD_CTRL(MX51_PAD_DI1_PIN12__GPIO3_1, PAD_CTL_PKE | + PAD_CTL_DSE_MED), /* DAB Display EN */ + NEW_PAD_CTRL(MX51_PAD_DI1_PIN13__GPIO3_2, PAD_CTL_PKE | + PAD_CTL_DSE_MED), /* WDOG_TRIGGER */ + }; + + static const iomux_v3_cfg_t gpio_pads_2[] = { + NEW_PAD_CTRL(MX51_PAD_DI1_D0_CS__GPIO3_3, PAD_CTL_PKE | + PAD_CTL_DSE_MED), /* Display2 TxEN */ + NEW_PAD_CTRL(MX51_PAD_DI1_D1_CS__GPIO3_4, PAD_CTL_PKE | + PAD_CTL_DSE_MED), /* DAB Light EN */ + NEW_PAD_CTRL(MX51_PAD_DISPB2_SER_DIN__GPIO3_5, PAD_CTL_PKE | + PAD_CTL_DSE_MED), /* AUDIO_MUTE */ + NEW_PAD_CTRL(MX51_PAD_DISPB2_SER_DIO__GPIO3_6, PAD_CTL_PKE | + PAD_CTL_DSE_MED), /* SPARE_OUT */ + NEW_PAD_CTRL(MX51_PAD_NANDF_D14__GPIO3_26, PAD_CTL_PKE | + PAD_CTL_DSE_MED), /* BEEPER_EN */ + NEW_PAD_CTRL(MX51_PAD_NANDF_D13__GPIO3_27, PAD_CTL_PKE | + PAD_CTL_DSE_MED), /* POWER_OFF */ + NEW_PAD_CTRL(MX51_PAD_NANDF_D10__GPIO3_30, PAD_CTL_PKE | + PAD_CTL_DSE_MED), /* FRAM_WE */ + NEW_PAD_CTRL(MX51_PAD_CSPI1_RDY__GPIO4_26, PAD_CTL_PKE | + PAD_CTL_DSE_MED), /* EXPANSION_EN */ + MX51_PAD_GPIO1_2__PWM1_PWMO, + }; - /* DAB Display EN, GPIO3_1 */ - mxc_request_iomux(MX51_PIN_DI1_PIN12, IOMUX_CONFIG_ALT4); - mxc_iomux_set_pad(MX51_PIN_DI1_PIN12, 0x82); + unsigned int i; - /* WDOG_TRIGGER, GPIO3_2 */ - mxc_request_iomux(MX51_PIN_DI1_PIN13, IOMUX_CONFIG_ALT4); - mxc_iomux_set_pad(MX51_PIN_DI1_PIN13, 0x82); + imx_iomux_v3_setup_multiple_pads(gpio_pads_1, ARRAY_SIZE(gpio_pads_1)); /* Now we need to trigger the watchdog */ WATCHDOG_RESET(); - /* Display2 TxEN, GPIO3_3 */ - mxc_request_iomux(MX51_PIN_DI1_D0_CS, IOMUX_CONFIG_ALT4); - mxc_iomux_set_pad(MX51_PIN_DI1_D0_CS, 0x82); - - /* DAB Light EN, GPIO3_4 */ - mxc_request_iomux(MX51_PIN_DI1_D1_CS, IOMUX_CONFIG_ALT4); - mxc_iomux_set_pad(MX51_PIN_DI1_D1_CS, 0x82); - - /* AUDIO_MUTE, GPIO3_5 */ - mxc_request_iomux(MX51_PIN_DISPB2_SER_DIN, IOMUX_CONFIG_ALT4); - mxc_iomux_set_pad(MX51_PIN_DISPB2_SER_DIN, 0x82); - - /* SPARE_OUT, GPIO3_6 */ - mxc_request_iomux(MX51_PIN_DISPB2_SER_DIO, IOMUX_CONFIG_ALT4); - mxc_iomux_set_pad(MX51_PIN_DISPB2_SER_DIO, 0x82); - - /* BEEPER_EN, GPIO3_26 */ - mxc_request_iomux(MX51_PIN_NANDF_D14, IOMUX_CONFIG_ALT3); - mxc_iomux_set_pad(MX51_PIN_NANDF_D14, 0x82); - - /* POWER_OFF, GPIO3_27 */ - mxc_request_iomux(MX51_PIN_NANDF_D13, IOMUX_CONFIG_ALT3); - mxc_iomux_set_pad(MX51_PIN_NANDF_D13, 0x82); - - /* FRAM_WE, GPIO3_30 */ - mxc_request_iomux(MX51_PIN_NANDF_D10, IOMUX_CONFIG_ALT3); - mxc_iomux_set_pad(MX51_PIN_NANDF_D10, 0x82); - - /* EXPANSION_EN, GPIO4_26 */ - mxc_request_iomux(MX51_PIN_CSPI1_RDY, IOMUX_CONFIG_ALT3); - mxc_iomux_set_pad(MX51_PIN_CSPI1_RDY, 0x82); - - /* PWM Output GPIO1_2 */ - mxc_request_iomux(MX51_PIN_GPIO1_2, IOMUX_CONFIG_ALT1); + imx_iomux_v3_setup_multiple_pads(gpio_pads_2, ARRAY_SIZE(gpio_pads_2)); /* * Set GPIO1_4 to high and output; it is used to reset * the system on reboot */ - gpio_direction_output(4, 1); + gpio_direction_output(IMX_GPIO_NR(1, 4), 1); - gpio_direction_output(7, 0); - for (i = 65; i < 71; i++) + gpio_direction_output(IMX_GPIO_NR(1, 7), 0); + for (i = IMX_GPIO_NR(3, 1); i < IMX_GPIO_NR(3, 7); i++) gpio_direction_output(i, 0); - gpio_direction_output(94, 0); + gpio_direction_output(IMX_GPIO_NR(3, 30), 0); /* Set POWER_OFF high */ - gpio_direction_output(91, 1); + gpio_direction_output(IMX_GPIO_NR(3, 27), 1); - gpio_direction_output(90, 0); + gpio_direction_output(IMX_GPIO_NR(3, 26), 0); - gpio_direction_output(122, 0); + gpio_direction_output(IMX_GPIO_NR(4, 26), 0); - gpio_direction_output(121, 1); + gpio_direction_output(IMX_GPIO_NR(4, 25), 1); WATCHDOG_RESET(); } static void setup_fec(void) { - /*FEC_MDIO*/ - mxc_request_iomux(MX51_PIN_EIM_EB2, IOMUX_CONFIG_ALT3); - mxc_iomux_set_pad(MX51_PIN_EIM_EB2, 0x1FD); - - /*FEC_MDC*/ - mxc_request_iomux(MX51_PIN_NANDF_CS3, IOMUX_CONFIG_ALT2); - mxc_iomux_set_pad(MX51_PIN_NANDF_CS3, 0x2004); - - /* FEC RDATA[3] */ - mxc_request_iomux(MX51_PIN_EIM_CS3, IOMUX_CONFIG_ALT3); - mxc_iomux_set_pad(MX51_PIN_EIM_CS3, 0x180); - - /* FEC RDATA[2] */ - mxc_request_iomux(MX51_PIN_EIM_CS2, IOMUX_CONFIG_ALT3); - mxc_iomux_set_pad(MX51_PIN_EIM_CS2, 0x180); - - /* FEC RDATA[1] */ - mxc_request_iomux(MX51_PIN_EIM_EB3, IOMUX_CONFIG_ALT3); - mxc_iomux_set_pad(MX51_PIN_EIM_EB3, 0x180); - - /* FEC RDATA[0] */ - mxc_request_iomux(MX51_PIN_NANDF_D9, IOMUX_CONFIG_ALT2); - mxc_iomux_set_pad(MX51_PIN_NANDF_D9, 0x2180); - - /* FEC TDATA[3] */ - mxc_request_iomux(MX51_PIN_NANDF_CS6, IOMUX_CONFIG_ALT2); - mxc_iomux_set_pad(MX51_PIN_NANDF_CS6, 0x2004); - - /* FEC TDATA[2] */ - mxc_request_iomux(MX51_PIN_NANDF_CS5, IOMUX_CONFIG_ALT2); - mxc_iomux_set_pad(MX51_PIN_NANDF_CS5, 0x2004); - - /* FEC TDATA[1] */ - mxc_request_iomux(MX51_PIN_NANDF_CS4, IOMUX_CONFIG_ALT2); - mxc_iomux_set_pad(MX51_PIN_NANDF_CS4, 0x2004); - - /* FEC TDATA[0] */ - mxc_request_iomux(MX51_PIN_NANDF_D8, IOMUX_CONFIG_ALT2); - mxc_iomux_set_pad(MX51_PIN_NANDF_D8, 0x2004); - - /* FEC TX_EN */ - mxc_request_iomux(MX51_PIN_NANDF_CS7, IOMUX_CONFIG_ALT1); - mxc_iomux_set_pad(MX51_PIN_NANDF_CS7, 0x2004); - - /* FEC TX_ER */ - mxc_request_iomux(MX51_PIN_NANDF_CS2, IOMUX_CONFIG_ALT2); - mxc_iomux_set_pad(MX51_PIN_NANDF_CS2, 0x2004); - - /* FEC TX_CLK */ - mxc_request_iomux(MX51_PIN_NANDF_RDY_INT, IOMUX_CONFIG_ALT1); - mxc_iomux_set_pad(MX51_PIN_NANDF_RDY_INT, 0x2180); - - /* FEC TX_COL */ - mxc_request_iomux(MX51_PIN_NANDF_RB2, IOMUX_CONFIG_ALT1); - mxc_iomux_set_pad(MX51_PIN_NANDF_RB2, 0x2180); - - /* FEC RX_CLK */ - mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_ALT1); - mxc_iomux_set_pad(MX51_PIN_NANDF_RB3, 0x2180); - - /* FEC RX_CRS */ - mxc_request_iomux(MX51_PIN_EIM_CS5, IOMUX_CONFIG_ALT3); - mxc_iomux_set_pad(MX51_PIN_EIM_CS5, 0x180); - - /* FEC RX_ER */ - mxc_request_iomux(MX51_PIN_EIM_CS4, IOMUX_CONFIG_ALT3); - mxc_iomux_set_pad(MX51_PIN_EIM_CS4, 0x180); - - /* FEC RX_DV */ - mxc_request_iomux(MX51_PIN_NANDF_D11, IOMUX_CONFIG_ALT2); - mxc_iomux_set_pad(MX51_PIN_NANDF_D11, 0x2180); + static const iomux_v3_cfg_t fec_pads[] = { + NEW_PAD_CTRL(MX51_PAD_EIM_EB2__FEC_MDIO, PAD_CTL_HYS | + PAD_CTL_PUS_22K_UP | PAD_CTL_ODE | + PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST), + MX51_PAD_NANDF_CS3__FEC_MDC, + NEW_PAD_CTRL(MX51_PAD_EIM_CS3__FEC_RDATA3, MX51_PAD_CTRL_2), + NEW_PAD_CTRL(MX51_PAD_EIM_CS2__FEC_RDATA2, MX51_PAD_CTRL_2), + NEW_PAD_CTRL(MX51_PAD_EIM_EB3__FEC_RDATA1, MX51_PAD_CTRL_2), + MX51_PAD_NANDF_D9__FEC_RDATA0, + MX51_PAD_NANDF_CS6__FEC_TDATA3, + MX51_PAD_NANDF_CS5__FEC_TDATA2, + MX51_PAD_NANDF_CS4__FEC_TDATA1, + MX51_PAD_NANDF_D8__FEC_TDATA0, + MX51_PAD_NANDF_CS7__FEC_TX_EN, + MX51_PAD_NANDF_CS2__FEC_TX_ER, + MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK, + NEW_PAD_CTRL(MX51_PAD_NANDF_RB2__FEC_COL, MX51_PAD_CTRL_4), + NEW_PAD_CTRL(MX51_PAD_NANDF_RB3__FEC_RX_CLK, MX51_PAD_CTRL_4), + MX51_PAD_EIM_CS5__FEC_CRS, + MX51_PAD_EIM_CS4__FEC_RX_ER, + NEW_PAD_CTRL(MX51_PAD_NANDF_D11__FEC_RX_DV, MX51_PAD_CTRL_4), + }; + + imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads)); } struct fsl_esdhc_cfg esdhc_cfg[1] = { @@ -536,7 +424,7 @@ int get_mmc_getcd(u8 *cd, struct mmc *mmc) struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR) - *cd = gpio_get_value(0); + *cd = gpio_get_value(IMX_GPIO_NR(1, 0)); else *cd = 0; @@ -546,56 +434,24 @@ int get_mmc_getcd(u8 *cd, struct mmc *mmc) #ifdef CONFIG_FSL_ESDHC int board_mmc_init(bd_t *bis) { - mxc_request_iomux(MX51_PIN_SD1_CMD, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_request_iomux(MX51_PIN_SD1_CLK, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_request_iomux(MX51_PIN_SD1_DATA0, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_request_iomux(MX51_PIN_SD1_DATA1, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_request_iomux(MX51_PIN_SD1_DATA2, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_request_iomux(MX51_PIN_SD1_DATA3, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_iomux_set_pad(MX51_PIN_SD1_CMD, - PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | - PAD_CTL_PUE_PULL | - PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_SD1_CLK, - PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | - PAD_CTL_HYS_NONE | PAD_CTL_47K_PU | - PAD_CTL_PUE_PULL | - PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_SD1_DATA0, - PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | - PAD_CTL_PUE_PULL | - PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_SD1_DATA1, - PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | - PAD_CTL_PUE_PULL | - PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_SD1_DATA2, - PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | - PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU | - PAD_CTL_PUE_PULL | - PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); - mxc_iomux_set_pad(MX51_PIN_SD1_DATA3, - PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH | - PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PD | - PAD_CTL_PUE_PULL | - PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST); - mxc_request_iomux(MX51_PIN_GPIO1_0, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_iomux_set_pad(MX51_PIN_GPIO1_0, - PAD_CTL_HYS_ENABLE); - mxc_request_iomux(MX51_PIN_GPIO1_1, - IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION); - mxc_iomux_set_pad(MX51_PIN_GPIO1_1, - PAD_CTL_HYS_ENABLE); + static const iomux_v3_cfg_t sd1_pads[] = { + NEW_PAD_CTRL(MX51_PAD_SD1_CMD__SD1_CMD, PAD_CTL_DSE_MAX | + PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST), + NEW_PAD_CTRL(MX51_PAD_SD1_CLK__SD1_CLK, PAD_CTL_DSE_MAX | + PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST), + NEW_PAD_CTRL(MX51_PAD_SD1_DATA0__SD1_DATA0, PAD_CTL_DSE_MAX | + PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST), + NEW_PAD_CTRL(MX51_PAD_SD1_DATA1__SD1_DATA1, PAD_CTL_DSE_MAX | + PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST), + NEW_PAD_CTRL(MX51_PAD_SD1_DATA2__SD1_DATA2, PAD_CTL_DSE_MAX | + PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | PAD_CTL_SRE_FAST), + NEW_PAD_CTRL(MX51_PAD_SD1_DATA3__SD1_DATA3, PAD_CTL_DSE_MAX | + PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN | PAD_CTL_SRE_FAST), + NEW_PAD_CTRL(MX51_PAD_GPIO1_0__SD1_CD, PAD_CTL_HYS), + NEW_PAD_CTRL(MX51_PAD_GPIO1_1__SD1_WP, PAD_CTL_HYS), + }; + + imx_iomux_v3_setup_multiple_pads(sd1_pads, ARRAY_SIZE(sd1_pads)); esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); return fsl_esdhc_initialize(bis, &esdhc_cfg[0]); @@ -604,13 +460,18 @@ int board_mmc_init(bd_t *bis) void lcd_enable(void) { + static const iomux_v3_cfg_t lcd_pads[] = { + MX51_PAD_DI1_PIN2__DI1_PIN2, + MX51_PAD_DI1_PIN3__DI1_PIN3, + }; + int ret; - mxc_request_iomux(MX51_PIN_DI1_PIN2, IOMUX_CONFIG_ALT0); - mxc_request_iomux(MX51_PIN_DI1_PIN3, IOMUX_CONFIG_ALT0); + imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads)); - gpio_set_value(2, 1); - mxc_request_iomux(MX51_PIN_GPIO1_2, IOMUX_CONFIG_ALT0); + gpio_set_value(IMX_GPIO_NR(1, 2), 1); + imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_GPIO1_2__GPIO1_2, + NO_PAD_CTRL)); ret = ipuv3_fb_init(&nec_nl6448bc26_09c, 0, IPU_PIX_FMT_RGB666); if (ret) @@ -624,9 +485,9 @@ int board_early_init_f(void) init_drive_strength(); /* Setup debug led */ - gpio_direction_output(6, 0); - mxc_request_iomux(MX51_PIN_GPIO1_6, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_GPIO1_6, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); + gpio_direction_output(IMX_GPIO_NR(1, 6), 0); + imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_GPIO1_6__GPIO1_6, + PAD_CTL_DSE_MAX | PAD_CTL_SRE_FAST)); /* wait a little while to give the pll time to settle */ sdelay(100000); @@ -644,12 +505,12 @@ int board_early_init_f(void) static void backlight(int on) { if (on) { - gpio_set_value(65, 1); + gpio_set_value(IMX_GPIO_NR(3, 1), 1); udelay(10000); - gpio_set_value(68, 1); + gpio_set_value(IMX_GPIO_NR(3, 4), 1); } else { - gpio_set_value(65, 0); - gpio_set_value(68, 0); + gpio_set_value(IMX_GPIO_NR(3, 1), 0); + gpio_set_value(IMX_GPIO_NR(3, 4), 0); } } diff --git a/board/wandboard/wandboard.c b/board/wandboard/wandboard.c index ac7b89a..bb98352 100644 --- a/board/wandboard/wandboard.c +++ b/board/wandboard/wandboard.c @@ -16,6 +16,7 @@ #include <asm/arch/sys_proto.h> #include <asm/gpio.h> #include <asm/imx-common/iomux-v3.h> +#include <asm/imx-common/boot_mode.h> #include <asm/io.h> #include <asm/sizes.h> #include <common.h> @@ -26,18 +27,19 @@ DECLARE_GLOBAL_DATA_PTR; -#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ - PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) +#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ + PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \ + PAD_CTL_SRE_FAST | PAD_CTL_HYS) -#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \ - PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) +#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \ + PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \ + PAD_CTL_SRE_FAST | PAD_CTL_HYS) -#define ENET_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ - PAD_CTL_DSE_40ohm | PAD_CTL_HYS) +#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ + PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS) +#define USDHC1_CD_GPIO IMX_GPIO_NR(1, 2) +#define USDHC3_CD_GPIO IMX_GPIO_NR(3, 9) #define ETH_PHY_RESET IMX_GPIO_NR(3, 29) int dram_init(void) @@ -52,6 +54,17 @@ static iomux_v3_cfg_t const uart1_pads[] = { MX6_PAD_CSI0_DAT11__UART1_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), }; +iomux_v3_cfg_t const usdhc1_pads[] = { + MX6_PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD1_CMD__USDHC1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD1_DAT0__USDHC1_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD1_DAT1__USDHC1_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD1_DAT2__USDHC1_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD1_DAT3__USDHC1_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + /* Carrier MicroSD Card Detect */ + MX6_PAD_GPIO_2__GPIO_1_2 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + static iomux_v3_cfg_t const usdhc3_pads[] = { MX6_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), @@ -59,6 +72,8 @@ static iomux_v3_cfg_t const usdhc3_pads[] = { MX6_PAD_SD3_DAT1__USDHC3_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6_PAD_SD3_DAT2__USDHC3_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6_PAD_SD3_DAT3__USDHC3_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + /* SOM MicroSD Card Detect */ + MX6_PAD_EIM_DA9__GPIO_3_9 | MUX_PAD_CTRL(NO_PAD_CTRL), }; static iomux_v3_cfg_t const enet_pads[] = { @@ -96,18 +111,66 @@ static void setup_iomux_enet(void) gpio_set_value(ETH_PHY_RESET, 1); } -static struct fsl_esdhc_cfg usdhc_cfg[1] = { +static struct fsl_esdhc_cfg usdhc_cfg[2] = { {USDHC3_BASE_ADDR}, + {USDHC1_BASE_ADDR}, }; -int board_mmc_init(bd_t *bis) +int board_mmc_getcd(struct mmc *mmc) { - imx_iomux_v3_setup_multiple_pads(usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); - - usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); - usdhc_cfg[0].max_bus_width = 4; + struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; + int ret = 0; + + switch (cfg->esdhc_base) { + case USDHC1_BASE_ADDR: + ret = !gpio_get_value(USDHC1_CD_GPIO); + break; + case USDHC3_BASE_ADDR: + ret = !gpio_get_value(USDHC3_CD_GPIO); + break; + } + + return ret; +} - return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); +int board_mmc_init(bd_t *bis) +{ + s32 status = 0; + u32 index = 0; + + /* + * Following map is done: + * (U-boot device node) (Physical Port) + * mmc0 SOM MicroSD + * mmc1 Carrier board MicroSD + */ + for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) { + switch (index) { + case 0: + imx_iomux_v3_setup_multiple_pads( + usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); + usdhc_cfg[0].max_bus_width = 4; + gpio_direction_input(USDHC3_CD_GPIO); + break; + case 1: + imx_iomux_v3_setup_multiple_pads( + usdhc1_pads, ARRAY_SIZE(usdhc1_pads)); + usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); + usdhc_cfg[1].max_bus_width = 4; + gpio_direction_input(USDHC1_CD_GPIO); + break; + default: + printf("Warning: you configured more USDHC controllers" + "(%d) then supported by the board (%d)\n", + index + 1, CONFIG_SYS_FSL_USDHC_NUM); + return status; + } + + status |= fsl_esdhc_initialize(bis, &usdhc_cfg[index]); + } + + return status; } static int mx6_rgmii_rework(struct phy_device *phydev) @@ -162,6 +225,24 @@ int board_early_init_f(void) return 0; } +#ifdef CONFIG_CMD_BMODE +static const struct boot_mode board_boot_modes[] = { + /* 4 bit bus width */ + {"mmc0", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)}, + {"mmc1", MAKE_CFGVAL(0x40, 0x20, 0x00, 0x00)}, + {NULL, 0}, +}; +#endif + +int board_late_init(void) +{ +#ifdef CONFIG_CMD_BMODE + add_board_boot_modes(board_boot_modes); +#endif + + return 0; +} + int board_init(void) { /* address of boot parameters */ diff --git a/board/woodburn/woodburn.c b/board/woodburn/woodburn.c index 7c36af0..3f2e6b5 100644 --- a/board/woodburn/woodburn.c +++ b/board/woodburn/woodburn.c @@ -28,8 +28,7 @@ #include <asm/arch/imx-regs.h> #include <asm/arch/crm_regs.h> #include <asm/arch/clock.h> -#include <asm/arch/mx35_pins.h> -#include <asm/arch/iomux.h> +#include <asm/arch/iomux-mx35.h> #include <i2c.h> #include <power/pmic.h> #include <fsl_pmic.h> @@ -74,25 +73,29 @@ static void board_setup_sdram(void) static void setup_iomux_fec(void) { + static const iomux_v3_cfg_t fec_pads[] = { + MX35_PAD_FEC_TX_CLK__FEC_TX_CLK, + MX35_PAD_FEC_RX_CLK__FEC_RX_CLK, + MX35_PAD_FEC_RX_DV__FEC_RX_DV, + MX35_PAD_FEC_COL__FEC_COL, + MX35_PAD_FEC_RDATA0__FEC_RDATA_0, + MX35_PAD_FEC_TDATA0__FEC_TDATA_0, + MX35_PAD_FEC_TX_EN__FEC_TX_EN, + MX35_PAD_FEC_MDC__FEC_MDC, + MX35_PAD_FEC_MDIO__FEC_MDIO, + MX35_PAD_FEC_TX_ERR__FEC_TX_ERR, + MX35_PAD_FEC_RX_ERR__FEC_RX_ERR, + MX35_PAD_FEC_CRS__FEC_CRS, + MX35_PAD_FEC_RDATA1__FEC_RDATA_1, + MX35_PAD_FEC_TDATA1__FEC_TDATA_1, + MX35_PAD_FEC_RDATA2__FEC_RDATA_2, + MX35_PAD_FEC_TDATA2__FEC_TDATA_2, + MX35_PAD_FEC_RDATA3__FEC_RDATA_3, + MX35_PAD_FEC_TDATA3__FEC_TDATA_3, + }; + /* setup pins for FEC */ - mxc_request_iomux(MX35_PIN_FEC_TX_CLK, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_RX_CLK, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_RX_DV, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_COL, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_RDATA0, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_TDATA0, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_TX_EN, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_MDC, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_MDIO, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_TX_ERR, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_RX_ERR, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_CRS, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_RDATA1, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_TDATA1, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_RDATA2, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_TDATA2, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_RDATA3, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_FEC_TDATA3, MUX_CONFIG_FUNC); + imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads)); } int woodburn_init(void) @@ -130,9 +133,9 @@ int woodburn_init(void) setup_iomux_fec(); /* setup GPIO1_4 FEC_ENABLE signal */ - mxc_request_iomux(MX35_PIN_SCKR, MUX_CONFIG_ALT5); + imx_iomux_v3_setup_pad(MX35_PAD_SCKR__GPIO1_4); gpio_direction_output(4, 1); - mxc_request_iomux(MX35_PIN_HCKT, MUX_CONFIG_ALT5); + imx_iomux_v3_setup_pad(MX35_PAD_HCKT__GPIO1_9); gpio_direction_output(9, 1); return 0; @@ -228,22 +231,24 @@ struct fsl_esdhc_cfg esdhc_cfg = {MMC_SDHC1_BASE_ADDR}; int board_mmc_init(bd_t *bis) { + static const iomux_v3_cfg_t sdhc1_pads[] = { + MX35_PAD_SD1_CMD__ESDHC1_CMD, + MX35_PAD_SD1_CLK__ESDHC1_CLK, + MX35_PAD_SD1_DATA0__ESDHC1_DAT0, + MX35_PAD_SD1_DATA1__ESDHC1_DAT1, + MX35_PAD_SD1_DATA2__ESDHC1_DAT2, + MX35_PAD_SD1_DATA3__ESDHC1_DAT3, + }; + /* configure pins for SDHC1 only */ - mxc_request_iomux(MX35_PIN_SD1_CMD, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_SD1_CLK, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_SD1_DATA0, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_SD1_DATA1, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_SD1_DATA2, MUX_CONFIG_FUNC); - mxc_request_iomux(MX35_PIN_SD1_DATA3, MUX_CONFIG_FUNC); + imx_iomux_v3_setup_multiple_pads(sdhc1_pads, ARRAY_SIZE(sdhc1_pads)); /* MMC Card Detect on GPIO1_7 */ - mxc_request_iomux(MX35_PIN_SCKT, MUX_CONFIG_ALT5); - mxc_iomux_set_input(MUX_IN_GPIO1_IN_7, 0x1); + imx_iomux_v3_setup_pad(MX35_PAD_SCKT__GPIO1_7); gpio_direction_input(GPIO_MMC_CD); /* MMC Write Protection on GPIO1_8 */ - mxc_request_iomux(MX35_PIN_FST, MUX_CONFIG_ALT5); - mxc_iomux_set_input(MUX_IN_GPIO1_IN_8, 0x1); + imx_iomux_v3_setup_pad(MX35_PAD_FST__GPIO1_8); gpio_direction_input(GPIO_MMC_WP); esdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK); diff --git a/board/xilinx/zynq/board.c b/board/xilinx/zynq/board.c index 8ed75c3..b02c364 100644 --- a/board/xilinx/zynq/board.c +++ b/board/xilinx/zynq/board.c @@ -22,13 +22,52 @@ #include <common.h> #include <netdev.h> +#include <zynqpl.h> +#include <asm/arch/hardware.h> +#include <asm/arch/sys_proto.h> DECLARE_GLOBAL_DATA_PTR; +#ifdef CONFIG_FPGA +Xilinx_desc fpga; + +/* It can be done differently */ +Xilinx_desc fpga010 = XILINX_XC7Z010_DESC(0x10); +Xilinx_desc fpga020 = XILINX_XC7Z020_DESC(0x20); +Xilinx_desc fpga030 = XILINX_XC7Z030_DESC(0x30); +Xilinx_desc fpga045 = XILINX_XC7Z045_DESC(0x45); +#endif + int board_init(void) { +#ifdef CONFIG_FPGA + u32 idcode; + + idcode = zynq_slcr_get_idcode(); + + switch (idcode) { + case XILINX_ZYNQ_7010: + fpga = fpga010; + break; + case XILINX_ZYNQ_7020: + fpga = fpga020; + break; + case XILINX_ZYNQ_7030: + fpga = fpga030; + break; + case XILINX_ZYNQ_7045: + fpga = fpga045; + break; + } +#endif + icache_enable(); +#ifdef CONFIG_FPGA + fpga_init(); + fpga_add(fpga_xilinx, &fpga); +#endif + return 0; } @@ -38,10 +77,33 @@ int board_eth_init(bd_t *bis) { u32 ret = 0; -#if defined(CONFIG_ZYNQ_GEM) && defined(CONFIG_ZYNQ_GEM_BASEADDR0) - ret = zynq_gem_initialize(bis, CONFIG_ZYNQ_GEM_BASEADDR0); +#if defined(CONFIG_ZYNQ_GEM) +# if defined(CONFIG_ZYNQ_GEM0) + ret |= zynq_gem_initialize(bis, ZYNQ_GEM_BASEADDR0, + CONFIG_ZYNQ_GEM_PHY_ADDR0, 0); +# endif +# if defined(CONFIG_ZYNQ_GEM1) + ret |= zynq_gem_initialize(bis, ZYNQ_GEM_BASEADDR1, + CONFIG_ZYNQ_GEM_PHY_ADDR1, 0); +# endif +#endif + return ret; +} #endif +#ifdef CONFIG_CMD_MMC +int board_mmc_init(bd_t *bd) +{ + int ret = 0; + +#if defined(CONFIG_ZYNQ_SDHCI) +# if defined(CONFIG_ZYNQ_SDHCI0) + ret = zynq_sdhci_init(ZYNQ_SDHCI_BASEADDR0); +# endif +# if defined(CONFIG_ZYNQ_SDHCI1) + ret |= zynq_sdhci_init(ZYNQ_SDHCI_BASEADDR1); +# endif +#endif return ret; } #endif @@ -94,6 +94,7 @@ at91sam9g10ek_dataflash_cs3 arm arm926ejs at91sam9261ek atmel at91sam9g10ek_nandflash arm arm926ejs at91sam9261ek atmel at91 at91sam9261ek:AT91SAM9G10,SYS_USE_NANDFLASH at91sam9g20ek_dataflash_cs0 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_DATAFLASH_CS0 at91sam9g20ek_dataflash_cs1 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_DATAFLASH_CS1 +at91sam9g20ek_mmc arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_MMC at91sam9g20ek_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_NANDFLASH at91sam9g20ek_2mmc_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,AT91SAM9G20EK_2MMC,SYS_USE_NANDFLASH at91sam9m10g45ek_nandflash arm arm926ejs at91sam9m10g45ek atmel at91 at91sam9m10g45ek:AT91SAM9M10G45,SYS_USE_NANDFLASH @@ -106,6 +107,9 @@ at91sam9x5ek_mmc arm arm926ejs at91sam9x5ek atmel at91sam9xeek_dataflash_cs0 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_DATAFLASH_CS0 at91sam9xeek_dataflash_cs1 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_DATAFLASH_CS1 at91sam9xeek_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_NANDFLASH +at91sam9n12ek_nandflash arm arm926ejs at91sam9n12ek atmel at91 at91sam9n12ek:AT91SAM9N12,SYS_USE_NANDFLASH +at91sam9n12ek_spiflash arm arm926ejs at91sam9n12ek atmel at91 at91sam9n12ek:AT91SAM9N12,SYS_USE_SPIFLASH +at91sam9n12ek_mmc arm arm926ejs at91sam9n12ek atmel at91 at91sam9n12ek:AT91SAM9N12,SYS_USE_MMC snapper9260 arm arm926ejs - bluewater at91 snapper9260:AT91SAM9260 snapper9g20 arm arm926ejs snapper9260 bluewater at91 snapper9260:AT91SAM9G20 vl_ma2sc arm arm926ejs vl_ma2sc BuS at91 @@ -185,6 +189,7 @@ rd6281a arm arm926ejs - Marvell sheevaplug arm arm926ejs - Marvell kirkwood ib62x0 arm arm926ejs ib62x0 raidsonic kirkwood dockstar arm arm926ejs - Seagate kirkwood +goflexhome arm arm926ejs - Seagate kirkwood tk71 arm arm926ejs tk71 karo kirkwood devkit3250 arm arm926ejs devkit3250 timll lpc32xx jadecpu arm arm926ejs jadecpu syteco mb86r0x @@ -234,7 +239,9 @@ versatilepb arm arm926ejs versatile armltd versatileqemu arm arm926ejs versatile armltd versatile versatile:ARCH_VERSATILE_QEMU,ARCH_VERSATILE_PB integratorap_cm946es arm arm946es integrator armltd - integratorap:CM946ES integratorcp_cm946es arm arm946es integrator armltd - integratorcp:CM946ES -ca9x4_ct_vxp arm armv7 vexpress armltd +vexpress_ca15_tc2 arm armv7 vexpress armltd +vexpress_ca5x2 arm armv7 vexpress armltd +vexpress_ca9x4 arm armv7 vexpress armltd am335x_evm arm armv7 am335x ti am33xx am335x_evm:SERIAL1,CONS_INDEX=1 am335x_evm_spiboot arm armv7 am335x ti am33xx am335x_evm:SERIAL1,CONS_INDEX=1,SPI_BOOT am335x_evm_uart1 arm armv7 am335x ti am33xx am335x_evm:SERIAL2,CONS_INDEX=2 @@ -245,7 +252,11 @@ am335x_evm_uart5 arm armv7 am335x ti am335x_evm_usbspl arm armv7 am335x ti am33xx am335x_evm:SERIAL1,CONS_INDEX=1,SPL_USBETH_SUPPORT ti814x_evm arm armv7 ti814x ti am33xx pcm051 arm armv7 pcm051 phytec am33xx pcm051 +sama5d3xek_mmc arm armv7 sama5d3xek atmel at91 sama5d3xek:SAMA5D3,SYS_USE_MMC +sama5d3xek_nandflash arm armv7 sama5d3xek atmel at91 sama5d3xek:SAMA5D3,SYS_USE_NANDFLASH +sama5d3xek_spiflash arm armv7 sama5d3xek atmel at91 sama5d3xek:SAMA5D3,SYS_USE_SERIALFLASH highbank arm armv7 highbank - highbank +m53evk arm armv7 m53evk denx mx5 m53evk:IMX_CONFIG=board/denx/m53evk/imximage.cfg mx51_efikamx arm armv7 mx51_efikamx genesi mx5 mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKAMX,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_mx.cfg mx51_efikasb arm armv7 mx51_efikamx genesi mx5 mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKASB,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_sb.cfg mx51evk arm armv7 mx51evk freescale mx5 mx51evk:IMX_CONFIG=board/freescale/mx51evk/imximage.cfg @@ -259,6 +270,8 @@ mx6qarm2 arm armv7 mx6qarm2 freesca mx6qsabreauto arm armv7 mx6qsabreauto freescale mx6 mx6qsabreauto:IMX_CONFIG=board/freescale/mx6qsabreauto/imximage.cfg mx6qsabrelite arm armv7 mx6qsabrelite freescale mx6 mx6qsabrelite:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg mx6qsabresd arm armv7 mx6qsabresd freescale mx6 mx6qsabresd:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg +mx6slevk arm armv7 mx6slevk freescale mx6 mx6slevk:IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL +titanium arm armv7 titanium freescale mx6 titanium:IMX_CONFIG=board/freescale/titanium/imximage.cfg eco5pk arm armv7 eco5pk 8dtech omap3 nitrogen6dl arm armv7 nitrogen6x boundary mx6 nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl.cfg,MX6DL,DDR_MB=1024 nitrogen6dl2g arm armv7 nitrogen6x boundary mx6 nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl2g.cfg,MX6DL,DDR_MB=2048 @@ -268,15 +281,16 @@ nitrogen6s arm armv7 nitrogen6x boundar nitrogen6s1g arm armv7 nitrogen6x boundary mx6 nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s1g.cfg,MX6S,DDR_MB=1024 wandboard_dl arm armv7 wandboard - mx6 wandboard:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl.cfg,MX6DL,DDR_MB=1024 wandboard_solo arm armv7 wandboard - mx6 wandboard:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s.cfg,MX6S,DDR_MB=512 -cm_t35 arm armv7 cm_t35 - omap3 omap3_overo arm armv7 overo - omap3 omap3_pandora arm armv7 pandora - omap3 dig297 arm armv7 dig297 comelit omap3 +cm_t35 arm armv7 cm_t35 compulab omap3 igep0020 arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_ONENAND igep0020_nand arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_NAND igep0030 arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_ONENAND igep0030_nand arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_NAND igep0032 arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0032,BOOT_ONENAND +igep0033 arm armv7 igep0033 isee am33xx am3517_evm arm armv7 am3517evm logicpd omap3 mt_ventoux arm armv7 mt_ventoux teejet omap3 omap3_zoom1 arm armv7 zoom1 logicpd omap3 @@ -311,7 +325,7 @@ seaboard arm armv7:arm720t seaboard nvidia ventana arm armv7:arm720t ventana nvidia tegra20 whistler arm armv7:arm720t whistler nvidia tegra20 cardhu arm armv7:arm720t cardhu nvidia tegra30 -beaver arm armv7:arm720t cardhu nvidia tegra30 +beaver arm armv7:arm720t beaver nvidia tegra30 dalmore arm armv7:arm720t dalmore nvidia tegra114 colibri_t20_iris arm armv7:arm720t colibri_t20_iris toradex tegra20 u8500_href arm armv7 u8500 st-ericsson u8500 diff --git a/common/Makefile b/common/Makefile index f50bf2e..3ba4316 100644 --- a/common/Makefile +++ b/common/Makefile @@ -111,6 +111,7 @@ ifdef CONFIG_FPGA COBJS-$(CONFIG_CMD_FPGA) += cmd_fpga.o endif COBJS-$(CONFIG_CMD_FS_GENERIC) += cmd_fs.o +COBJS-$(CONFIG_CMD_FUSE) += cmd_fuse.o COBJS-$(CONFIG_CMD_GETTIME) += cmd_gettime.o COBJS-$(CONFIG_CMD_GPIO) += cmd_gpio.o COBJS-$(CONFIG_CMD_I2C) += cmd_i2c.o diff --git a/common/cmd_fpga.c b/common/cmd_fpga.c index 1341604..3cd1b13 100644 --- a/common/cmd_fpga.c +++ b/common/cmd_fpga.c @@ -27,14 +27,11 @@ */ #include <common.h> #include <command.h> -#if defined(CONFIG_CMD_NET) -#include <net.h> -#endif #include <fpga.h> #include <malloc.h> /* Local functions */ -static int fpga_get_op (char *opstr); +static int fpga_get_op(char *opstr); /* Local defines */ #define FPGA_NONE -1 @@ -44,102 +41,6 @@ static int fpga_get_op (char *opstr); #define FPGA_DUMP 3 #define FPGA_LOADMK 4 -/* Convert bitstream data and load into the fpga */ -int fpga_loadbitstream(unsigned long dev, char* fpgadata, size_t size) -{ -#if defined(CONFIG_FPGA_XILINX) - unsigned int length; - unsigned int swapsize; - char buffer[80]; - unsigned char *dataptr; - unsigned int i; - int rc; - - dataptr = (unsigned char *)fpgadata; - - /* skip the first bytes of the bitsteam, their meaning is unknown */ - length = (*dataptr << 8) + *(dataptr+1); - dataptr+=2; - dataptr+=length; - - /* get design name (identifier, length, string) */ - length = (*dataptr << 8) + *(dataptr+1); - dataptr+=2; - if (*dataptr++ != 0x61) { - debug("%s: Design name identifier not recognized " - "in bitstream\n", - __func__); - return FPGA_FAIL; - } - - length = (*dataptr << 8) + *(dataptr+1); - dataptr+=2; - for(i=0;i<length;i++) - buffer[i] = *dataptr++; - - printf(" design filename = \"%s\"\n", buffer); - - /* get part number (identifier, length, string) */ - if (*dataptr++ != 0x62) { - printf("%s: Part number identifier not recognized " - "in bitstream\n", - __func__); - return FPGA_FAIL; - } - - length = (*dataptr << 8) + *(dataptr+1); - dataptr+=2; - for(i=0;i<length;i++) - buffer[i] = *dataptr++; - printf(" part number = \"%s\"\n", buffer); - - /* get date (identifier, length, string) */ - if (*dataptr++ != 0x63) { - printf("%s: Date identifier not recognized in bitstream\n", - __func__); - return FPGA_FAIL; - } - - length = (*dataptr << 8) + *(dataptr+1); - dataptr+=2; - for(i=0;i<length;i++) - buffer[i] = *dataptr++; - printf(" date = \"%s\"\n", buffer); - - /* get time (identifier, length, string) */ - if (*dataptr++ != 0x64) { - printf("%s: Time identifier not recognized in bitstream\n", - __func__); - return FPGA_FAIL; - } - - length = (*dataptr << 8) + *(dataptr+1); - dataptr+=2; - for(i=0;i<length;i++) - buffer[i] = *dataptr++; - printf(" time = \"%s\"\n", buffer); - - /* get fpga data length (identifier, length) */ - if (*dataptr++ != 0x65) { - printf("%s: Data length identifier not recognized in bitstream\n", - __func__); - return FPGA_FAIL; - } - swapsize = ((unsigned int) *dataptr <<24) + - ((unsigned int) *(dataptr+1) <<16) + - ((unsigned int) *(dataptr+2) <<8 ) + - ((unsigned int) *(dataptr+3) ) ; - dataptr+=4; - printf(" bytes in bitstream = %d\n", swapsize); - - rc = fpga_load(dev, dataptr, swapsize); - return rc; -#else - printf("Bitstream support only for Xilinx devices\n"); - return FPGA_FAIL; -#endif -} - /* ------------------------------------------------------------------------- */ /* command form: * fpga <op> <device number> <data addr> <datasize> @@ -148,81 +49,81 @@ int fpga_loadbitstream(unsigned long dev, char* fpgadata, size_t size) * If there is no data addr field, the fpgadata environment variable is used. * The info command requires no data address field. */ -int do_fpga (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) +int do_fpga(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) { int op, dev = FPGA_INVALID_DEVICE; size_t data_size = 0; void *fpga_data = NULL; - char *devstr = getenv ("fpga"); - char *datastr = getenv ("fpgadata"); + char *devstr = getenv("fpga"); + char *datastr = getenv("fpgadata"); int rc = FPGA_FAIL; int wrong_parms = 0; -#if defined (CONFIG_FIT) +#if defined(CONFIG_FIT) const char *fit_uname = NULL; ulong fit_addr; #endif if (devstr) - dev = (int) simple_strtoul (devstr, NULL, 16); + dev = (int) simple_strtoul(devstr, NULL, 16); if (datastr) - fpga_data = (void *) simple_strtoul (datastr, NULL, 16); + fpga_data = (void *)simple_strtoul(datastr, NULL, 16); switch (argc) { case 5: /* fpga <op> <dev> <data> <datasize> */ - data_size = simple_strtoul (argv[4], NULL, 16); + data_size = simple_strtoul(argv[4], NULL, 16); case 4: /* fpga <op> <dev> <data> */ #if defined(CONFIG_FIT) - if (fit_parse_subimage (argv[3], (ulong)fpga_data, - &fit_addr, &fit_uname)) { + if (fit_parse_subimage(argv[3], (ulong)fpga_data, + &fit_addr, &fit_uname)) { fpga_data = (void *)fit_addr; - debug("* fpga: subimage '%s' from FIT image " - "at 0x%08lx\n", - fit_uname, fit_addr); + debug("* fpga: subimage '%s' from FIT image ", + fit_uname); + debug("at 0x%08lx\n", fit_addr); } else #endif { - fpga_data = (void *) simple_strtoul (argv[3], NULL, 16); + fpga_data = (void *)simple_strtoul(argv[3], NULL, 16); debug("* fpga: cmdline image address = 0x%08lx\n", - (ulong)fpga_data); + (ulong)fpga_data); } - debug("%s: fpga_data = 0x%x\n", __func__, (uint) fpga_data); + debug("%s: fpga_data = 0x%x\n", __func__, (uint)fpga_data); case 3: /* fpga <op> <dev | data addr> */ - dev = (int) simple_strtoul (argv[2], NULL, 16); + dev = (int)simple_strtoul(argv[2], NULL, 16); debug("%s: device = %d\n", __func__, dev); /* FIXME - this is a really weak test */ - if ((argc == 3) && (dev > fpga_count ())) { /* must be buffer ptr */ + if ((argc == 3) && (dev > fpga_count())) { + /* must be buffer ptr */ debug("%s: Assuming buffer pointer in arg 3\n", - __func__); + __func__); #if defined(CONFIG_FIT) - if (fit_parse_subimage (argv[2], (ulong)fpga_data, - &fit_addr, &fit_uname)) { + if (fit_parse_subimage(argv[2], (ulong)fpga_data, + &fit_addr, &fit_uname)) { fpga_data = (void *)fit_addr; - debug("* fpga: subimage '%s' from FIT image " - "at 0x%08lx\n", - fit_uname, fit_addr); + debug("* fpga: subimage '%s' from FIT image ", + fit_uname); + debug("at 0x%08lx\n", fit_addr); } else #endif { - fpga_data = (void *) dev; - debug("* fpga: cmdline image address = " - "0x%08lx\n", (ulong)fpga_data); + fpga_data = (void *)dev; + debug("* fpga: cmdline image addr = 0x%08lx\n", + (ulong)fpga_data); } debug("%s: fpga_data = 0x%x\n", - __func__, (uint) fpga_data); + __func__, (uint)fpga_data); dev = FPGA_INVALID_DEVICE; /* reset device num */ } case 2: /* fpga <op> */ - op = (int) fpga_get_op (argv[1]); + op = (int)fpga_get_op(argv[1]); break; default: - debug("%s: Too many or too few args (%d)\n", - __func__, argc); + debug("%s: Too many or too few args (%d)\n", __func__, argc); op = FPGA_NONE; /* force usage display */ break; } @@ -258,11 +159,11 @@ int do_fpga (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) return CMD_RET_USAGE; case FPGA_INFO: - rc = fpga_info (dev); + rc = fpga_info(dev); break; case FPGA_LOAD: - rc = fpga_load (dev, fpga_data, data_size); + rc = fpga_load(dev, fpga_data, data_size); break; case FPGA_LOADB: @@ -270,15 +171,16 @@ int do_fpga (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) break; case FPGA_LOADMK: - switch (genimg_get_format (fpga_data)) { + switch (genimg_get_format(fpga_data)) { case IMAGE_FORMAT_LEGACY: { - image_header_t *hdr = (image_header_t *)fpga_data; - ulong data; + image_header_t *hdr = + (image_header_t *)fpga_data; + ulong data; - data = (ulong)image_get_data (hdr); - data_size = image_get_data_size (hdr); - rc = fpga_load (dev, (void *)data, data_size); + data = (ulong)image_get_data(hdr); + data_size = image_get_data_size(hdr); + rc = fpga_load(dev, (void *)data, data_size); } break; #if defined(CONFIG_FIT) @@ -289,19 +191,21 @@ int do_fpga (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) const void *fit_data; if (fit_uname == NULL) { - puts ("No FIT subimage unit name\n"); + puts("No FIT subimage unit name\n"); return 1; } - if (!fit_check_format (fit_hdr)) { - puts ("Bad FIT image format\n"); + if (!fit_check_format(fit_hdr)) { + puts("Bad FIT image format\n"); return 1; } /* get fpga component image node offset */ - noffset = fit_image_get_node (fit_hdr, fit_uname); + noffset = fit_image_get_node(fit_hdr, + fit_uname); if (noffset < 0) { - printf ("Can't find '%s' FIT subimage\n", fit_uname); + printf("Can't find '%s' FIT subimage\n", + fit_uname); return 1; } @@ -312,72 +216,72 @@ int do_fpga (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) } /* get fpga subimage data address and length */ - if (fit_image_get_data (fit_hdr, noffset, &fit_data, &data_size)) { - puts ("Could not find fpga subimage data\n"); + if (fit_image_get_data(fit_hdr, noffset, + &fit_data, &data_size)) { + puts("Fpga subimage data not found\n"); return 1; } - rc = fpga_load (dev, fit_data, data_size); + rc = fpga_load(dev, fit_data, data_size); } break; #endif default: - puts ("** Unknown image type\n"); + puts("** Unknown image type\n"); rc = FPGA_FAIL; break; } break; case FPGA_DUMP: - rc = fpga_dump (dev, fpga_data, data_size); + rc = fpga_dump(dev, fpga_data, data_size); break; default: - printf ("Unknown operation\n"); + printf("Unknown operation\n"); return CMD_RET_USAGE; } - return (rc); + return rc; } /* * Map op to supported operations. We don't use a table since we * would just have to relocate it from flash anyway. */ -static int fpga_get_op (char *opstr) +static int fpga_get_op(char *opstr) { int op = FPGA_NONE; - if (!strcmp ("info", opstr)) { + if (!strcmp("info", opstr)) op = FPGA_INFO; - } else if (!strcmp ("loadb", opstr)) { + else if (!strcmp("loadb", opstr)) op = FPGA_LOADB; - } else if (!strcmp ("load", opstr)) { + else if (!strcmp("load", opstr)) op = FPGA_LOAD; - } else if (!strcmp ("loadmk", opstr)) { + else if (!strcmp("loadmk", opstr)) op = FPGA_LOADMK; - } else if (!strcmp ("dump", opstr)) { + else if (!strcmp("dump", opstr)) op = FPGA_DUMP; - } - if (op == FPGA_NONE) { - printf ("Unknown fpga operation \"%s\"\n", opstr); - } + if (op == FPGA_NONE) + printf("Unknown fpga operation \"%s\"\n", opstr); + return op; } -U_BOOT_CMD (fpga, 6, 1, do_fpga, - "loadable FPGA image support", - "[operation type] [device number] [image address] [image size]\n" - "fpga operations:\n" - " dump\t[dev]\t\t\tLoad device to memory buffer\n" - " info\t[dev]\t\t\tlist known device information\n" - " load\t[dev] [address] [size]\tLoad device from memory buffer\n" - " loadb\t[dev] [address] [size]\t" - "Load device from bitstream buffer (Xilinx only)\n" - " loadmk [dev] [address]\tLoad device generated with mkimage" +U_BOOT_CMD(fpga, 6, 1, do_fpga, + "loadable FPGA image support", + "[operation type] [device number] [image address] [image size]\n" + "fpga operations:\n" + " dump\t[dev]\t\t\tLoad device to memory buffer\n" + " info\t[dev]\t\t\tlist known device information\n" + " load\t[dev] [address] [size]\tLoad device from memory buffer\n" + " loadb\t[dev] [address] [size]\t" + "Load device from bitstream buffer (Xilinx only)\n" + " loadmk [dev] [address]\tLoad device generated with mkimage" #if defined(CONFIG_FIT) - "\n" - "\tFor loadmk operating on FIT format uImage address must include\n" - "\tsubimage unit name in the form of addr:<subimg_uname>" + "\n" + "\tFor loadmk operating on FIT format uImage address must include\n" + "\tsubimage unit name in the form of addr:<subimg_uname>" #endif ); diff --git a/common/cmd_fuse.c b/common/cmd_fuse.c new file mode 100644 index 0000000..f24c01c --- /dev/null +++ b/common/cmd_fuse.c @@ -0,0 +1,168 @@ +/* + * (C) Copyright 2009-2013 ADVANSEE + * Benoît Thébaudeau <benoit.thebaudeau@advansee.com> + * + * Based on the mpc512x iim code: + * Copyright 2008 Silicon Turnkey Express, Inc. + * Martha Marx <mmarx@silicontkx.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <fuse.h> +#include <asm/errno.h> + +static int strtou32(const char *str, unsigned int base, u32 *result) +{ + char *ep; + + *result = simple_strtoul(str, &ep, base); + if (ep == str || *ep != '\0') + return -EINVAL; + + return 0; +} + +static int confirm_prog(void) +{ + puts("Warning: Programming fuses is an irreversible operation!\n" + " This may brick your system.\n" + " Use this command only if you are sure of " + "what you are doing!\n" + "\nReally perform this fuse programming? <y/N>\n"); + + if (getc() == 'y') { + int c; + + putc('y'); + c = getc(); + putc('\n'); + if (c == '\r') + return 1; + } + + puts("Fuse programming aborted\n"); + return 0; +} + +static int do_fuse(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) +{ + const char *op = argc >= 2 ? argv[1] : NULL; + int confirmed = argc >= 3 && !strcmp(argv[2], "-y"); + u32 bank, word, cnt, val; + int ret, i; + + argc -= 2 + confirmed; + argv += 2 + confirmed; + + if (argc < 2 || strtou32(argv[0], 0, &bank) || + strtou32(argv[1], 0, &word)) + return CMD_RET_USAGE; + + if (!strcmp(op, "read")) { + if (argc == 2) + cnt = 1; + else if (argc != 3 || strtou32(argv[2], 0, &cnt)) + return CMD_RET_USAGE; + + printf("Reading bank %u:\n", bank); + for (i = 0; i < cnt; i++, word++) { + if (!(i % 4)) + printf("\nWord 0x%.8x:", word); + + ret = fuse_read(bank, word, &val); + if (ret) + goto err; + + printf(" %.8x", val); + } + putc('\n'); + } else if (!strcmp(op, "sense")) { + if (argc == 2) + cnt = 1; + else if (argc != 3 || strtou32(argv[2], 0, &cnt)) + return CMD_RET_USAGE; + + printf("Sensing bank %u:\n", bank); + for (i = 0; i < cnt; i++, word++) { + if (!(i % 4)) + printf("\nWord 0x%.8x:", word); + + ret = fuse_sense(bank, word, &val); + if (ret) + goto err; + + printf(" %.8x", val); + } + putc('\n'); + } else if (!strcmp(op, "prog")) { + if (argc < 3) + return CMD_RET_USAGE; + + for (i = 2; i < argc; i++, word++) { + if (strtou32(argv[i], 16, &val)) + return CMD_RET_USAGE; + + printf("Programming bank %u word 0x%.8x to 0x%.8x...\n", + bank, word, val); + if (!confirmed && !confirm_prog()) + return CMD_RET_FAILURE; + ret = fuse_prog(bank, word, val); + if (ret) + goto err; + } + } else if (!strcmp(op, "override")) { + if (argc < 3) + return CMD_RET_USAGE; + + for (i = 2; i < argc; i++, word++) { + if (strtou32(argv[i], 16, &val)) + return CMD_RET_USAGE; + + printf("Overriding bank %u word 0x%.8x with " + "0x%.8x...\n", bank, word, val); + ret = fuse_override(bank, word, val); + if (ret) + goto err; + } + } else { + return CMD_RET_USAGE; + } + + return 0; + +err: + puts("ERROR\n"); + return ret; +} + +U_BOOT_CMD( + fuse, CONFIG_SYS_MAXARGS, 0, do_fuse, + "Fuse sub-system", + "read <bank> <word> [<cnt>] - read 1 or 'cnt' fuse words,\n" + " starting at 'word'\n" + "fuse sense <bank> <word> [<cnt>] - sense 1 or 'cnt' fuse words,\n" + " starting at 'word'\n" + "fuse prog [-y] <bank> <word> <hexval> [<hexval>...] - program 1 or\n" + " several fuse words, starting at 'word' (PERMANENT)\n" + "fuse override <bank> <word> <hexval> [<hexval>...] - override 1 or\n" + " several fuse words, starting at 'word'" +); diff --git a/common/spl/spl.c b/common/spl/spl.c index 7ce2d5f..628c399 100644 --- a/common/spl/spl.c +++ b/common/spl/spl.c @@ -118,17 +118,13 @@ void spl_parse_image_header(const struct image_header *header) __weak void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) { - typedef void __noreturn (*image_entry_noargs_t)(u32 *); + typedef void __noreturn (*image_entry_noargs_t)(void); + image_entry_noargs_t image_entry = (image_entry_noargs_t) spl_image->entry_point; debug("image entry point: 0x%X\n", spl_image->entry_point); - /* Pass the saved boot_params from rom code */ -#if defined(CONFIG_VIRTIO) || defined(CONFIG_ZEBU) - image_entry = (image_entry_noargs_t)0x80100000; -#endif - u32 boot_params_ptr_addr = (u32)&boot_params_ptr; - image_entry((u32 *)boot_params_ptr_addr); + image_entry(); } #ifdef CONFIG_SPL_RAM_DEVICE diff --git a/doc/README.at91 b/doc/README.at91 index b51df00..6741213 100644 --- a/doc/README.at91 +++ b/doc/README.at91 @@ -1,6 +1,9 @@ Atmel AT91 Evaluation kits -http://atmel.com/dyn/products/tools.asp?family_id=605#1443 +Index + - I. Board mapping & boot media + - II. NAND partition table + - III. watchdog support I. Board mapping & boot media ------------------------------------------------------------------------------ @@ -10,7 +13,7 @@ AT91SAM9260EK, AT91SAM9G20EK & AT91SAM9XEEK Memory map 0x20000000 - 23FFFFFF SDRAM (64 MB) 0xC0000000 - Cxxxxxxx Atmel Dataflash card (J13) - 0xD0000000 - Dxxxxxxx Soldered Atmel Dataflash + 0xD0000000 - D07FFFFF Soldered Atmel Dataflash (AT45DB642) Environment variables @@ -20,7 +23,6 @@ Environment variables - Nand flash. You can choose your storage location at config step (here for at91sam9260ek) : - make at91sam9260ek_config - use data flash (spi cs1) (default) make at91sam9260ek_nandflash_config - use nand flash make at91sam9260ek_dataflash_cs0_config - use data flash (spi cs0) make at91sam9260ek_dataflash_cs1_config - use data flash (spi cs1) @@ -32,7 +34,7 @@ AT91SAM9261EK, AT91SAM9G10EK Memory map 0x20000000 - 23FFFFFF SDRAM (64 MB) - 0xC0000000 - Cxxxxxxx Soldered Atmel Dataflash + 0xC0000000 - C07FFFFF Soldered Atmel Dataflash (AT45DB642) 0xD0000000 - Dxxxxxxx Atmel Dataflash card (J22) Environment variables @@ -43,7 +45,6 @@ Environment variables - Nand flash. You can choose your storage location at config step (here for at91sam9260ek) : - make at91sam9261ek_config - use data flash (spi cs0) (default) make at91sam9261ek_nandflash_config - use nand flash make at91sam9261ek_dataflash_cs0_config - use data flash (spi cs0) make at91sam9261ek_dataflash_cs3_config - use data flash (spi cs3) @@ -65,7 +66,6 @@ Environment variables - Nor flash (not populate by default) You can choose your storage location at config step (here for at91sam9260ek) : - make at91sam9263ek_config - use data flash (spi cs0) (default) make at91sam9263ek_nandflash_config - use nand flash make at91sam9263ek_dataflash_cs0_config - use data flash (spi cs0) make at91sam9263ek_norflash_config - use nor flash @@ -79,19 +79,15 @@ AT91SAM9M10G45EK ------------------------------------------------------------------------------ Memory map - 0x20000000 - 23FFFFFF SDRAM (64 MB) - 0xC0000000 - Cxxxxxxx Atmel Dataflash card (J12) + 0x70000000 - 77FFFFFF SDRAM (128 MB) Environment variables U-Boot environment variables can be stored at different places: - - Dataflash on SPI chip select 0 (dataflash card) - Nand flash. You can choose your storage location at config step (here for at91sam9m10g45ek) : - make at91sam9m10g45ek_config - use data flash (spi cs0) (default) make at91sam9m10g45ek_nandflash_config - use nand flash - make at91sam9m10g45ek_dataflash_cs0_config - use data flash (spi cs0) ------------------------------------------------------------------------------ @@ -100,7 +96,7 @@ AT91SAM9RLEK Memory map 0x20000000 - 23FFFFFF SDRAM (64 MB) - 0xC0000000 - Cxxxxxxx Soldered Atmel Dataflash + 0xC0000000 - C07FFFFF Soldered Atmel Dataflash (AT45DB642) Environment variables @@ -108,12 +104,66 @@ Environment variables - Dataflash on SPI chip select 0 - Nand flash. - You can choose your storage location at config step (here for at91sam9260ek) : - make at91sam9263ek_config - use data flash (spi cs0) (default) - make at91sam9263ek_nandflash_config - use nand flash - make at91sam9263ek_dataflash_cs0_config - use data flash (spi cs0) + You can choose your storage location at config step (here for at91sam9rlek) : + make at91sam9rlek_nandflash_config - use nand flash + + +------------------------------------------------------------------------------ +AT91SAM9N12EK, AT91SAM9X5EK +------------------------------------------------------------------------------ + +Memory map + 0x20000000 - 27FFFFFF SDRAM (128 MB) + +Environment variables + + U-Boot environment variables can be stored at different places: + - Nand flash. + - SD/MMC card + - Serialflash/Dataflash on SPI chip select 0 + + You can choose your storage location at config step (here for at91sam9x5ek) : + make at91sam9x5ek_dataflash_config - use data flash + make at91sam9x5ek_mmc_config - use sd/mmc card + make at91sam9x5ek_nandflash_config - use nand flash + make at91sam9x5ek_spiflash_config - use serial flash + + +------------------------------------------------------------------------------ +SAMA5D3XEK +------------------------------------------------------------------------------ + +Memory map + 0x20000000 - 3FFFFFFF SDRAM (512 MB) + +Environment variables + + U-Boot environment variables can be stored at different places: + - Nand flash. + - SD/MMC card + - Serialflash on SPI chip select 0 + + You can choose your storage location at config step (here for sama5d3xek) : + make sama5d3xek_mmc_config - use SD/MMC card + make sama5d3xek_nandflash_config - use nand flash + make sama5d3xek_serialflash_config - use serial flash + + +II. NAND partition table + + All the board support boot from NAND flash will use the following NAND + partition table + + 0x00000000 - 0x0003FFFF bootstrap (256 KiB) + 0x00040000 - 0x000BFFFF u-boot (512 KiB) + 0x000C0000 - 0x000FFFFF env (256 KiB) + 0x00100000 - 0x0013FFFF env_redundant (256 KiB) + 0x00140000 - 0x0017FFFF spare (256 KiB) + 0x00180000 - 0x001FFFFF dtb (512 KiB) + 0x00200000 - 0x007FFFFF kernel (6 MiB) + 0x00800000 - 0xxxxxxxxx rootfs (All left) -II. Watchdog support +III. Watchdog support For security reasons, the at91 watchdog is running at boot time and, if deactivated, cannot be used anymore. diff --git a/doc/README.fsl_iim b/doc/README.fsl_iim new file mode 100644 index 0000000..e087f5e --- /dev/null +++ b/doc/README.fsl_iim @@ -0,0 +1,48 @@ +Driver implementing the fuse API for Freescale's IC Identification Module (IIM) + +This IP can be found on the following SoCs: + - MPC512x, + - i.MX25, + - i.MX27, + - i.MX31, + - i.MX35, + - i.MX51, + - i.MX53. + +The section numbers in this file refer to the i.MX25 Reference Manual. + +A fuse word contains 8 fuse bit slots, as explained in 30.4.2.2.1. + +A bank contains 256 fuse word slots, as shown by the memory map in 30.3.1. + +Some fuse bit or word slots may not have the corresponding fuses actually +implemented in the fusebox. + +See the README files of the SoCs using this driver in order to know the +conventions used by U-Boot to store some specific data in the fuses, e.g. MAC +addresses. + +Fuse operations: + + Read + Read operations are implemented as read accesses to the shadow registers, + using "Word y of Bank x" from the register summary in 30.3.2. This is + explained in detail in 30.4.5.1. + + Sense + Sense operations are implemented as explained in 30.4.5.2. + + Program + Program operations are implemented as explained in 30.4.5.3. Following + this operation, the shadow registers are reloaded by the hardware (not + immediately, but this does not make any difference for a user reading + these registers). + + Override + Override operations are implemented as write accesses to the shadow + registers, as explained in 30.4.5.4. + +Configuration: + + CONFIG_FSL_IIM + Define this to enable the fsl_iim driver. diff --git a/doc/README.fuse b/doc/README.fuse new file mode 100644 index 0000000..1bc91c4 --- /dev/null +++ b/doc/README.fuse @@ -0,0 +1,67 @@ +Fuse API functions and commands + +The fuse API allows to control a fusebox and how it is used by the upper +hardware layers. + +A fuse corresponds to a single non-volatile memory bit that can be programmed +(i.e. blown, set to 1) only once. The programming operation is irreversible. A +fuse that has not been programmed reads 0. + +Fuses can be used by SoCs to store various permanent configuration and data, +e.g. boot configuration, security configuration, MAC addresses, etc. + +A fuse word is the smallest group of fuses that can be read at once from the +fusebox control IP registers. This is limited to 32 bits with the current API. + +A fuse bank is the smallest group of fuse words having a common ID, as defined +by each SoC. + +Upon startup, the fusebox control IP reads the fuse values and stores them to a +volatile shadow cache. + +See the README files of the drivers implementing this API in order to know the +SoC- and implementation-specific details. + +Functions / commands: + + int fuse_read(u32 bank, u32 word, u32 *val); + fuse read <bank> <word> [<cnt>] + Read fuse words from the shadow cache. + + int fuse_sense(u32 bank, u32 word, u32 *val); + fuse sense <bank> <word> [<cnt>] + Sense - i.e. read directly from the fusebox, skipping the shadow cache - + fuse words. This operation does not update the shadow cache. + + This is useful to know the true value of fuses if an override has been + performed (see below). + + int fuse_prog(u32 bank, u32 word, u32 val); + fuse prog [-y] <bank> <word> <hexval> [<hexval>...] + Program fuse words. This operation directly affects the fusebox and is + irreversible. The shadow cache is updated accordingly or not, depending on + each IP. + + Only the bits to be programmed should be set in the input value (i.e. for + fuse bits that have already been programmed and hence should be left + unchanged by a further programming, it is preferable to clear the + corresponding bits in the input value in order not to perform a new + hardware programming operation on these fuse bits). + + int fuse_override(u32 bank, u32 word, u32 val); + fuse override <bank> <word> <hexval> [<hexval>...] + Override fuse words in the shadow cache. + + The fusebox is unaffected, so following this operation, the shadow cache + may differ from the fusebox values. Read or sense operations can then be + used to get the values from the shadow cache or from the fusebox. + + This is useful to change the behaviors linked to some cached fuse values, + either because this is needed only temporarily, or because some of the + fuses have already been programmed or are locked (if the SoC allows to + override a locked fuse). + +Configuration: + + CONFIG_CMD_FUSE + Define this to enable the fuse commands. diff --git a/doc/README.imx25 b/doc/README.imx25 new file mode 100644 index 0000000..0ca21b6 --- /dev/null +++ b/doc/README.imx25 @@ -0,0 +1,10 @@ +U-Boot for Freescale i.MX25 + +This file contains information for the port of U-Boot to the Freescale i.MX25 +SoC. + +1. CONVENTIONS FOR FUSE ASSIGNMENTS +----------------------------------- + +1.1 MAC Address: It is stored in the words 26 to 31 of fuse bank 0, using the + natural MAC byte order (i.e. MSB first). diff --git a/doc/README.imx27 b/doc/README.imx27 new file mode 100644 index 0000000..6f92cb4 --- /dev/null +++ b/doc/README.imx27 @@ -0,0 +1,10 @@ +U-Boot for Freescale i.MX27 + +This file contains information for the port of U-Boot to the Freescale i.MX27 +SoC. + +1. CONVENTIONS FOR FUSE ASSIGNMENTS +----------------------------------- + +1.1 MAC Address: It is stored in the words 4 to 9 of fuse bank 0, using the + reversed MAC byte order (i.e. LSB first). diff --git a/doc/README.imx5 b/doc/README.imx5 index e08941e..c5312b6 100644 --- a/doc/README.imx5 +++ b/doc/README.imx5 @@ -20,3 +20,9 @@ i.MX5x SoCs. This option should be enabled for boards having a SYS_ON_OFF_CTL signal connected to GPIO1[23] and triggering the MAIN_PWR_ON signal like in the reference designs. + +2. CONVENTIONS FOR FUSE ASSIGNMENTS +----------------------------------- + +2.1 MAC Address: It is stored in the words 9 to 14 of fuse bank 1, using the + natural MAC byte order (i.e. MSB first). diff --git a/doc/README.imx6 b/doc/README.imx6 new file mode 100644 index 0000000..513a06e --- /dev/null +++ b/doc/README.imx6 @@ -0,0 +1,10 @@ +U-Boot for Freescale i.MX6 + +This file contains information for the port of U-Boot to the Freescale i.MX6 +SoC. + +1. CONVENTIONS FOR FUSE ASSIGNMENTS +----------------------------------- + +1.1 MAC Address: It is stored in fuse bank 4, with the 32 lsbs in word 2 and the + 16 msbs in word 3. diff --git a/doc/README.imximage b/doc/README.imximage index 073e3fc..802eb90 100644 --- a/doc/README.imximage +++ b/doc/README.imximage @@ -65,9 +65,27 @@ Configuration command line syntax: This command need appear the fist before other valid commands in configuration file. + BOOT_OFFSET value + + This command is parallel to BOOT_FROM and + is preferred over BOOT_FROM. + + value: Offset of the image header, this + value shall be set to one of the + values found in the file: + arch/arm/include/asm/\ + imx-common/imximage.cfg + Example: + BOOT_OFFSET FLASH_OFFSET_STANDARD + BOOT_FROM nand/spi/sd/onenand/nor/sata + + This command is parallel to BOOT_OFFSET and + is to be deprecated in favor of BOOT_OFFSET. + Example: BOOT_FROM spi + DATA type address value type: word=4, halfword=2, byte=1 diff --git a/doc/README.mxc_ocotp b/doc/README.mxc_ocotp new file mode 100644 index 0000000..9a53311 --- /dev/null +++ b/doc/README.mxc_ocotp @@ -0,0 +1,50 @@ +Driver implementing the fuse API for Freescale's On-Chip OTP Controller (OCOTP) +on MXC + +This IP can be found on the following SoCs: + - i.MX6. + +Note that this IP is different from albeit similar to the IPs of the same name +that can be found on the following SoCs: + - i.MX23, + - i.MX28, + - i.MX50. + +The section numbers in this file refer to the i.MX6 Reference Manual. + +A fuse word contains 32 fuse bit slots, as explained in 46.2.1. + +A bank contains 8 fuse word slots, as explained in 46.2.1 and shown by the +memory map in 46.4. + +Some fuse bit or word slots may not have the corresponding fuses actually +implemented in the fusebox. + +See the README files of the SoCs using this driver in order to know the +conventions used by U-Boot to store some specific data in the fuses, e.g. MAC +addresses. + +Fuse operations: + + Read + Read operations are implemented as read accesses to the shadow registers, + using "Bankx Wordy" from the memory map in 46.4. This is explained in + detail by the first two paragraphs in 46.2.1.2. + + Sense + Sense operations are implemented as the direct fusebox read explained by + the steps in 46.2.1.2. + + Program + Program operations are implemented as explained by the steps in 46.2.1.3. + Following this operation, the shadow registers are not reloaded by the + hardware. + + Override + Override operations are implemented as write accesses to the shadow + registers, as explained by the first paragraph in 46.2.1.3. + +Configuration: + + CONFIG_MXC_OCOTP + Define this to enable the mxc_ocotp driver. diff --git a/doc/README.omap-reset-time b/doc/README.omap-reset-time new file mode 100644 index 0000000..0c974ba --- /dev/null +++ b/doc/README.omap-reset-time @@ -0,0 +1,20 @@ +README on how reset time on OMAPs should be calculated + +CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC: +Most OMAPs' provide a way to specify the time for +which the reset should be held low while the voltages +and Oscillator outputs stabilize. + +This time is mostly board and PMIC dependent. Hence the +boards are expected to specify a pre-computed time +using the above option, (the details on how to compute +the value are given below) without which a default time +as specified by CONFIG_DEFAULT_OMAP_RESET_TIME_MAX_USEC +is used. + +The value for CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC +can be computed using a summation of the below 3 parameters +-1- Time taken by the Osciallator to stop and restart +-2- PMIC OTP time +-3- Voltage ramp time, which can be derived using the +PMIC slew rate and value of voltage ramp needed. diff --git a/drivers/dma/apbh_dma.c b/drivers/dma/apbh_dma.c index 0c1cd83..510cb28 100644 --- a/drivers/dma/apbh_dma.c +++ b/drivers/dma/apbh_dma.c @@ -31,7 +31,8 @@ #include <asm/arch/clock.h> #include <asm/arch/imx-regs.h> #include <asm/arch/sys_proto.h> -#include <asm/arch/dma.h> +#include <asm/imx-common/dma.h> +#include <asm/imx-common/regs-apbh.h> static struct mxs_dma_chan mxs_dma_channels[MXS_MAX_DMA_CHANNELS]; @@ -226,7 +227,7 @@ static int mxs_dma_reset(int channel) #if defined(CONFIG_MX23) uint32_t setreg = (uint32_t)(&apbh_regs->hw_apbh_ctrl0_set); uint32_t offset = APBH_CTRL0_RESET_CHANNEL_OFFSET; -#elif defined(CONFIG_MX28) +#elif (defined(CONFIG_MX28) || defined(CONFIG_MX6)) uint32_t setreg = (uint32_t)(&apbh_regs->hw_apbh_channel_ctrl_set); uint32_t offset = APBH_CHANNEL_CTRL_RESET_CHANNEL_OFFSET; #endif diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile index b48f623..0b51dcd 100644 --- a/drivers/fpga/Makefile +++ b/drivers/fpga/Makefile @@ -30,6 +30,7 @@ COBJS-y += fpga.o COBJS-$(CONFIG_FPGA_SPARTAN2) += spartan2.o COBJS-$(CONFIG_FPGA_SPARTAN3) += spartan3.o COBJS-$(CONFIG_FPGA_VIRTEX2) += virtex2.o +COBJS-$(CONFIG_FPGA_ZYNQPL) += zynqpl.o COBJS-$(CONFIG_FPGA_XILINX) += xilinx.o COBJS-$(CONFIG_FPGA_LATTICE) += ivm_core.o lattice.o ifdef CONFIG_FPGA_ALTERA diff --git a/drivers/fpga/fpga.c b/drivers/fpga/fpga.c index 26d2443..f70bff6 100644 --- a/drivers/fpga/fpga.c +++ b/drivers/fpga/fpga.c @@ -22,122 +22,99 @@ * */ -/* - * Generic FPGA support - */ +/* Generic FPGA support */ #include <common.h> /* core U-Boot definitions */ #include <xilinx.h> /* xilinx specific definitions */ #include <altera.h> /* altera specific definitions */ #include <lattice.h> -#if 0 -#define FPGA_DEBUG /* define FPGA_DEBUG to get debug messages */ -#endif - /* Local definitions */ #ifndef CONFIG_MAX_FPGA_DEVICES #define CONFIG_MAX_FPGA_DEVICES 5 #endif -/* Enable/Disable debug console messages */ -#ifdef FPGA_DEBUG -#define PRINTF(fmt,args...) printf (fmt ,##args) -#else -#define PRINTF(fmt,args...) -#endif - /* Local static data */ static int next_desc = FPGA_INVALID_DEVICE; static fpga_desc desc_table[CONFIG_MAX_FPGA_DEVICES]; -/* Local static functions */ -static __attribute__((__const__)) fpga_desc * __attribute__((__const__)) fpga_get_desc( int devnum ); -static __attribute__((__const__)) fpga_desc * __attribute__((__const__)) fpga_validate(int devnum, const void *buf, - size_t bsize, char *fn ); -static int fpga_dev_info( int devnum ); - - -/* ------------------------------------------------------------------------- */ - -/* fpga_no_sup +/* + * fpga_no_sup * 'no support' message function */ -static void fpga_no_sup( char *fn, char *msg ) +static void fpga_no_sup(char *fn, char *msg) { - if ( fn && msg ) { - printf( "%s: No support for %s.\n", fn, msg); - } else if ( msg ) { - printf( "No support for %s.\n", msg); - } else { - printf( "No FPGA suport!\n"); - } + if (fn && msg) + printf("%s: No support for %s.\n", fn, msg); + else if (msg) + printf("No support for %s.\n", msg); + else + printf("No FPGA suport!\n"); } /* fpga_get_desc * map a device number to a descriptor */ -static __attribute__((__const__)) fpga_desc * __attribute__((__const__)) fpga_get_desc( int devnum ) +static const fpga_desc *const fpga_get_desc(int devnum) { - fpga_desc *desc = (fpga_desc * )NULL; + fpga_desc *desc = (fpga_desc *)NULL; - if (( devnum >= 0 ) && (devnum < next_desc )) { + if ((devnum >= 0) && (devnum < next_desc)) { desc = &desc_table[devnum]; - PRINTF( "%s: found fpga descriptor #%d @ 0x%p\n", - __FUNCTION__, devnum, desc ); + debug("%s: found fpga descriptor #%d @ 0x%p\n", + __func__, devnum, desc); } return desc; } - -/* fpga_validate +/* + * fpga_validate * generic parameter checking code */ -static __attribute__((__const__)) fpga_desc * __attribute__((__const__)) fpga_validate(int devnum, const void *buf, - size_t bsize, char *fn ) +const fpga_desc *const fpga_validate(int devnum, const void *buf, + size_t bsize, char *fn) { - fpga_desc * desc = fpga_get_desc( devnum ); + const fpga_desc *desc = fpga_get_desc(devnum); - if ( !desc ) { - printf( "%s: Invalid device number %d\n", fn, devnum ); - } + if (!desc) + printf("%s: Invalid device number %d\n", fn, devnum); - if ( !buf ) { - printf( "%s: Null buffer.\n", fn ); + if (!buf) { + printf("%s: Null buffer.\n", fn); return (fpga_desc * const)NULL; } return desc; } - -/* fpga_dev_info +/* + * fpga_dev_info * generic multiplexing code */ -static int fpga_dev_info( int devnum ) +static int fpga_dev_info(int devnum) { - int ret_val = FPGA_FAIL; /* assume failure */ - const fpga_desc * const desc = fpga_get_desc( devnum ); + int ret_val = FPGA_FAIL; /* assume failure */ + const fpga_desc * const desc = fpga_get_desc(devnum); - if ( desc ) { - PRINTF( "%s: Device Descriptor @ 0x%p\n", - __FUNCTION__, desc->devdesc ); + if (desc) { + debug("%s: Device Descriptor @ 0x%p\n", + __func__, desc->devdesc); - switch ( desc->devtype ) { + switch (desc->devtype) { case fpga_xilinx: #if defined(CONFIG_FPGA_XILINX) - printf( "Xilinx Device\nDescriptor @ 0x%p\n", desc ); - ret_val = xilinx_info( desc->devdesc ); + printf("Xilinx Device\nDescriptor @ 0x%p\n", desc); + ret_val = xilinx_info(desc->devdesc); #else - fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" ); + fpga_no_sup((char *)__func__, "Xilinx devices"); #endif break; case fpga_altera: #if defined(CONFIG_FPGA_ALTERA) - printf( "Altera Device\nDescriptor @ 0x%p\n", desc ); - ret_val = altera_info( desc->devdesc ); + printf("Altera Device\nDescriptor @ 0x%p\n", desc); + ret_val = altera_info(desc->devdesc); #else - fpga_no_sup( (char *)__FUNCTION__, "Altera devices" ); + fpga_no_sup((char *)__func__, "Altera devices"); #endif break; case fpga_lattice: @@ -145,171 +122,183 @@ static int fpga_dev_info( int devnum ) printf("Lattice Device\nDescriptor @ 0x%p\n", desc); ret_val = lattice_info(desc->devdesc); #else - fpga_no_sup( (char *)__FUNCTION__, "Lattice devices" ); + fpga_no_sup((char *)__func__, "Lattice devices"); #endif break; default: - printf( "%s: Invalid or unsupported device type %d\n", - __FUNCTION__, desc->devtype ); + printf("%s: Invalid or unsupported device type %d\n", + __func__, desc->devtype); } } else { - printf( "%s: Invalid device number %d\n", - __FUNCTION__, devnum ); + printf("%s: Invalid device number %d\n", __func__, devnum); } return ret_val; } - -/* ------------------------------------------------------------------------- */ -/* fgpa_init is usually called from misc_init_r() and MUST be called +/* + * fgpa_init is usually called from misc_init_r() and MUST be called * before any of the other fpga functions are used. */ void fpga_init(void) { next_desc = 0; - memset( desc_table, 0, sizeof(desc_table)); + memset(desc_table, 0, sizeof(desc_table)); - PRINTF( "%s: CONFIG_FPGA = 0x%x\n", __FUNCTION__, CONFIG_FPGA ); + debug("%s\n", __func__); } -/* fpga_count +/* + * fpga_count * Basic interface function to get the current number of devices available. */ -int fpga_count( void ) +int fpga_count(void) { return next_desc; } -/* fpga_add +/* + * fpga_add * Add the device descriptor to the device table. */ -int fpga_add( fpga_type devtype, void *desc ) +int fpga_add(fpga_type devtype, void *desc) { int devnum = FPGA_INVALID_DEVICE; - if ( next_desc < 0 ) { - printf( "%s: FPGA support not initialized!\n", __FUNCTION__ ); - } else if (( devtype > fpga_min_type ) && ( devtype < fpga_undefined )) { - if ( desc ) { - if ( next_desc < CONFIG_MAX_FPGA_DEVICES ) { + if (next_desc < 0) { + printf("%s: FPGA support not initialized!\n", __func__); + } else if ((devtype > fpga_min_type) && (devtype < fpga_undefined)) { + if (desc) { + if (next_desc < CONFIG_MAX_FPGA_DEVICES) { devnum = next_desc; desc_table[next_desc].devtype = devtype; desc_table[next_desc++].devdesc = desc; } else { - printf( "%s: Exceeded Max FPGA device count\n", __FUNCTION__ ); + printf("%s: Exceeded Max FPGA device count\n", + __func__); } } else { - printf( "%s: NULL device descriptor\n", __FUNCTION__ ); + printf("%s: NULL device descriptor\n", __func__); } } else { - printf( "%s: Unsupported FPGA type %d\n", __FUNCTION__, devtype ); + printf("%s: Unsupported FPGA type %d\n", __func__, devtype); } return devnum; } /* - * Generic multiplexing code + * Convert bitstream data and load into the fpga + */ +int __weak fpga_loadbitstream(int devnum, char *fpgadata, size_t size) +{ + printf("Bitstream support not implemented for this FPGA device\n"); + return FPGA_FAIL; +} + +/* + * Generic multiplexing code */ int fpga_load(int devnum, const void *buf, size_t bsize) { int ret_val = FPGA_FAIL; /* assume failure */ - fpga_desc * desc = fpga_validate( devnum, buf, bsize, (char *)__FUNCTION__ ); + const fpga_desc *desc = fpga_validate(devnum, buf, bsize, + (char *)__func__); - if ( desc ) { - switch ( desc->devtype ) { + if (desc) { + switch (desc->devtype) { case fpga_xilinx: #if defined(CONFIG_FPGA_XILINX) - ret_val = xilinx_load( desc->devdesc, buf, bsize ); + ret_val = xilinx_load(desc->devdesc, buf, bsize); #else - fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" ); + fpga_no_sup((char *)__func__, "Xilinx devices"); #endif break; case fpga_altera: #if defined(CONFIG_FPGA_ALTERA) - ret_val = altera_load( desc->devdesc, buf, bsize ); + ret_val = altera_load(desc->devdesc, buf, bsize); #else - fpga_no_sup( (char *)__FUNCTION__, "Altera devices" ); + fpga_no_sup((char *)__func__, "Altera devices"); #endif break; case fpga_lattice: #if defined(CONFIG_FPGA_LATTICE) ret_val = lattice_load(desc->devdesc, buf, bsize); #else - fpga_no_sup( (char *)__FUNCTION__, "Lattice devices" ); + fpga_no_sup((char *)__func__, "Lattice devices"); #endif break; default: - printf( "%s: Invalid or unsupported device type %d\n", - __FUNCTION__, desc->devtype ); + printf("%s: Invalid or unsupported device type %d\n", + __func__, desc->devtype); } } return ret_val; } -/* fpga_dump +/* + * fpga_dump * generic multiplexing code */ int fpga_dump(int devnum, const void *buf, size_t bsize) { int ret_val = FPGA_FAIL; /* assume failure */ - fpga_desc * desc = fpga_validate( devnum, buf, bsize, (char *)__FUNCTION__ ); + const fpga_desc *desc = fpga_validate(devnum, buf, bsize, + (char *)__func__); - if ( desc ) { - switch ( desc->devtype ) { + if (desc) { + switch (desc->devtype) { case fpga_xilinx: #if defined(CONFIG_FPGA_XILINX) - ret_val = xilinx_dump( desc->devdesc, buf, bsize ); + ret_val = xilinx_dump(desc->devdesc, buf, bsize); #else - fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" ); + fpga_no_sup((char *)__func__, "Xilinx devices"); #endif break; case fpga_altera: #if defined(CONFIG_FPGA_ALTERA) - ret_val = altera_dump( desc->devdesc, buf, bsize ); + ret_val = altera_dump(desc->devdesc, buf, bsize); #else - fpga_no_sup( (char *)__FUNCTION__, "Altera devices" ); + fpga_no_sup((char *)__func__, "Altera devices"); #endif break; case fpga_lattice: #if defined(CONFIG_FPGA_LATTICE) ret_val = lattice_dump(desc->devdesc, buf, bsize); #else - fpga_no_sup( (char *)__FUNCTION__, "Lattice devices" ); + fpga_no_sup((char *)__func__, "Lattice devices"); #endif break; default: - printf( "%s: Invalid or unsupported device type %d\n", - __FUNCTION__, desc->devtype ); + printf("%s: Invalid or unsupported device type %d\n", + __func__, desc->devtype); } } return ret_val; } - -/* fpga_info +/* + * fpga_info * front end to fpga_dev_info. If devnum is invalid, report on all * available devices. */ -int fpga_info( int devnum ) +int fpga_info(int devnum) { - if ( devnum == FPGA_INVALID_DEVICE ) { - if ( next_desc > 0 ) { + if (devnum == FPGA_INVALID_DEVICE) { + if (next_desc > 0) { int dev; - for ( dev = 0; dev < next_desc; dev++ ) { - fpga_dev_info( dev ); - } + for (dev = 0; dev < next_desc; dev++) + fpga_dev_info(dev); + return FPGA_SUCCESS; } else { - printf( "%s: No FPGA devices available.\n", __FUNCTION__ ); + printf("%s: No FPGA devices available.\n", __func__); return FPGA_FAIL; } } - else return fpga_dev_info( devnum ); -} -/* ------------------------------------------------------------------------- */ + return fpga_dev_info(devnum); +} diff --git a/drivers/fpga/xilinx.c b/drivers/fpga/xilinx.c index 32787b2..49e9437 100644 --- a/drivers/fpga/xilinx.c +++ b/drivers/fpga/xilinx.c @@ -1,4 +1,6 @@ /* + * (C) Copyright 2012-2013, Xilinx, Michal Simek + * * (C) Copyright 2002 * Rich Ireland, Enterasys Networks, rireland@enterasys.com. * Keith Outwater, keith_outwater@mvis.com @@ -28,9 +30,11 @@ */ #include <common.h> +#include <fpga.h> #include <virtex2.h> #include <spartan2.h> #include <spartan3.h> +#include <zynqpl.h> #if 0 #define FPGA_DEBUG @@ -48,6 +52,112 @@ static int xilinx_validate (Xilinx_desc * desc, char *fn); /* ------------------------------------------------------------------------- */ +int fpga_loadbitstream(int devnum, char *fpgadata, size_t size) +{ + unsigned int length; + unsigned int swapsize; + char buffer[80]; + unsigned char *dataptr; + unsigned int i; + const fpga_desc *desc; + Xilinx_desc *xdesc; + + dataptr = (unsigned char *)fpgadata; + /* Find out fpga_description */ + desc = fpga_validate(devnum, dataptr, 0, (char *)__func__); + /* Assign xilinx device description */ + xdesc = desc->devdesc; + + /* skip the first bytes of the bitsteam, their meaning is unknown */ + length = (*dataptr << 8) + *(dataptr + 1); + dataptr += 2; + dataptr += length; + + /* get design name (identifier, length, string) */ + length = (*dataptr << 8) + *(dataptr + 1); + dataptr += 2; + if (*dataptr++ != 0x61) { + debug("%s: Design name id not recognized in bitstream\n", + __func__); + return FPGA_FAIL; + } + + length = (*dataptr << 8) + *(dataptr + 1); + dataptr += 2; + for (i = 0; i < length; i++) + buffer[i] = *dataptr++; + + printf(" design filename = \"%s\"\n", buffer); + + /* get part number (identifier, length, string) */ + if (*dataptr++ != 0x62) { + printf("%s: Part number id not recognized in bitstream\n", + __func__); + return FPGA_FAIL; + } + + length = (*dataptr << 8) + *(dataptr + 1); + dataptr += 2; + for (i = 0; i < length; i++) + buffer[i] = *dataptr++; + + if (xdesc->name) { + i = strncmp(buffer, xdesc->name, strlen(xdesc->name)); + if (i) { + printf("%s: Wrong bitstream ID for this device\n", + __func__); + printf("%s: Bitstream ID %s, current device ID %d/%s\n", + __func__, buffer, devnum, xdesc->name); + return FPGA_FAIL; + } + } else { + printf("%s: Please fill correct device ID to Xilinx_desc\n", + __func__); + } + printf(" part number = \"%s\"\n", buffer); + + /* get date (identifier, length, string) */ + if (*dataptr++ != 0x63) { + printf("%s: Date identifier not recognized in bitstream\n", + __func__); + return FPGA_FAIL; + } + + length = (*dataptr << 8) + *(dataptr+1); + dataptr += 2; + for (i = 0; i < length; i++) + buffer[i] = *dataptr++; + printf(" date = \"%s\"\n", buffer); + + /* get time (identifier, length, string) */ + if (*dataptr++ != 0x64) { + printf("%s: Time identifier not recognized in bitstream\n", + __func__); + return FPGA_FAIL; + } + + length = (*dataptr << 8) + *(dataptr+1); + dataptr += 2; + for (i = 0; i < length; i++) + buffer[i] = *dataptr++; + printf(" time = \"%s\"\n", buffer); + + /* get fpga data length (identifier, length) */ + if (*dataptr++ != 0x65) { + printf("%s: Data length id not recognized in bitstream\n", + __func__); + return FPGA_FAIL; + } + swapsize = ((unsigned int) *dataptr << 24) + + ((unsigned int) *(dataptr + 1) << 16) + + ((unsigned int) *(dataptr + 2) << 8) + + ((unsigned int) *(dataptr + 3)); + dataptr += 4; + printf(" bytes in bitstream = %d\n", swapsize); + + return fpga_load(devnum, dataptr, swapsize); +} + int xilinx_load(Xilinx_desc *desc, const void *buf, size_t bsize) { int ret_val = FPGA_FAIL; /* assume a failure */ @@ -86,6 +196,16 @@ int xilinx_load(Xilinx_desc *desc, const void *buf, size_t bsize) __FUNCTION__); #endif break; + case xilinx_zynq: +#if defined(CONFIG_FPGA_ZYNQPL) + PRINTF("%s: Launching the Zynq PL Loader...\n", + __func__); + ret_val = zynq_load(desc, buf, bsize); +#else + printf("%s: No support for Zynq devices.\n", + __func__); +#endif + break; default: printf ("%s: Unsupported family type, %d\n", @@ -133,6 +253,16 @@ int xilinx_dump(Xilinx_desc *desc, const void *buf, size_t bsize) __FUNCTION__); #endif break; + case xilinx_zynq: +#if defined(CONFIG_FPGA_ZYNQPL) + PRINTF("%s: Launching the Zynq PL Reader...\n", + __func__); + ret_val = zynq_dump(desc, buf, bsize); +#else + printf("%s: No support for Zynq devices.\n", + __func__); +#endif + break; default: printf ("%s: Unsupported family type, %d\n", @@ -158,6 +288,9 @@ int xilinx_info (Xilinx_desc * desc) case Xilinx_Virtex2: printf ("Virtex-II\n"); break; + case xilinx_zynq: + printf("Zynq PL\n"); + break; /* Add new family types here */ default: printf ("Unknown family type, %d\n", desc->family); @@ -183,6 +316,9 @@ int xilinx_info (Xilinx_desc * desc) case master_selectmap: printf ("Master SelectMap Mode\n"); break; + case devcfg: + printf("Device configuration interface (Zynq)\n"); + break; /* Add new interface types here */ default: printf ("Unsupported interface type, %d\n", desc->iface); @@ -191,6 +327,8 @@ int xilinx_info (Xilinx_desc * desc) printf ("Device Size: \t%d bytes\n" "Cookie: \t0x%x (%d)\n", desc->size, desc->cookie, desc->cookie); + if (desc->name) + printf("Device name: \t%s\n", desc->name); if (desc->iface_fns) { printf ("Device Function Table @ 0x%p\n", desc->iface_fns); @@ -222,6 +360,14 @@ int xilinx_info (Xilinx_desc * desc) __FUNCTION__); #endif break; + case xilinx_zynq: +#if defined(CONFIG_FPGA_ZYNQPL) + zynq_info(desc); +#else + /* just in case */ + printf("%s: No support for Zynq devices.\n", + __func__); +#endif /* Add new family types here */ default: /* we don't need a message here - we give one up above */ diff --git a/drivers/fpga/zynqpl.c b/drivers/fpga/zynqpl.c new file mode 100644 index 0000000..8feccde --- /dev/null +++ b/drivers/fpga/zynqpl.c @@ -0,0 +1,355 @@ +/* + * (C) Copyright 2012-2013, Xilinx, Michal Simek + * + * (C) Copyright 2012 + * Joe Hershberger <joe.hershberger@ni.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <zynqpl.h> +#include <asm/arch/hardware.h> +#include <asm/arch/sys_proto.h> + +#define DEVCFG_CTRL_PCFG_PROG_B 0x40000000 +#define DEVCFG_ISR_FATAL_ERROR_MASK 0x00740040 +#define DEVCFG_ISR_ERROR_FLAGS_MASK 0x00340840 +#define DEVCFG_ISR_RX_FIFO_OV 0x00040000 +#define DEVCFG_ISR_DMA_DONE 0x00002000 +#define DEVCFG_ISR_PCFG_DONE 0x00000004 +#define DEVCFG_STATUS_DMA_CMD_Q_F 0x80000000 +#define DEVCFG_STATUS_DMA_CMD_Q_E 0x40000000 +#define DEVCFG_STATUS_DMA_DONE_CNT_MASK 0x30000000 +#define DEVCFG_STATUS_PCFG_INIT 0x00000010 +#define DEVCFG_MCTRL_RFIFO_FLUSH 0x00000002 +#define DEVCFG_MCTRL_WFIFO_FLUSH 0x00000001 + +#ifndef CONFIG_SYS_FPGA_WAIT +#define CONFIG_SYS_FPGA_WAIT CONFIG_SYS_HZ/100 /* 10 ms */ +#endif + +#ifndef CONFIG_SYS_FPGA_PROG_TIME +#define CONFIG_SYS_FPGA_PROG_TIME CONFIG_SYS_HZ /* 1 s */ +#endif + +int zynq_info(Xilinx_desc *desc) +{ + return FPGA_SUCCESS; +} + +#define DUMMY_WORD 0xffffffff + +/* Xilinx binary format header */ +static const u32 bin_format[] = { + DUMMY_WORD, /* Dummy words */ + DUMMY_WORD, + DUMMY_WORD, + DUMMY_WORD, + DUMMY_WORD, + DUMMY_WORD, + DUMMY_WORD, + DUMMY_WORD, + 0x000000bb, /* Sync word */ + 0x11220044, /* Sync word */ + DUMMY_WORD, + DUMMY_WORD, + 0xaa995566, /* Sync word */ +}; + +#define SWAP_NO 1 +#define SWAP_DONE 2 + +/* + * Load the whole word from unaligned buffer + * Keep in your mind that it is byte loading on little-endian system + */ +static u32 load_word(const void *buf, u32 swap) +{ + u32 word = 0; + u8 *bitc = (u8 *)buf; + int p; + + if (swap == SWAP_NO) { + for (p = 0; p < 4; p++) { + word <<= 8; + word |= bitc[p]; + } + } else { + for (p = 3; p >= 0; p--) { + word <<= 8; + word |= bitc[p]; + } + } + + return word; +} + +static u32 check_header(const void *buf) +{ + u32 i, pattern; + int swap = SWAP_NO; + u32 *test = (u32 *)buf; + + debug("%s: Let's check bitstream header\n", __func__); + + /* Checking that passing bin is not a bitstream */ + for (i = 0; i < ARRAY_SIZE(bin_format); i++) { + pattern = load_word(&test[i], swap); + + /* + * Bitstreams in binary format are swapped + * compare to regular bistream. + * Do not swap dummy word but if swap is done assume + * that parsing buffer is binary format + */ + if ((__swab32(pattern) != DUMMY_WORD) && + (__swab32(pattern) == bin_format[i])) { + pattern = __swab32(pattern); + swap = SWAP_DONE; + debug("%s: data swapped - let's swap\n", __func__); + } + + debug("%s: %d/%x: pattern %x/%x bin_format\n", __func__, i, + (u32)&test[i], pattern, bin_format[i]); + if (pattern != bin_format[i]) { + debug("%s: Bitstream is not recognized\n", __func__); + return 0; + } + } + debug("%s: Found bitstream header at %x %s swapinng\n", __func__, + (u32)buf, swap == SWAP_NO ? "without" : "with"); + + return swap; +} + +static void *check_data(u8 *buf, size_t bsize, u32 *swap) +{ + u32 word, p = 0; /* possition */ + + /* Because buf doesn't need to be aligned let's read it by chars */ + for (p = 0; p < bsize; p++) { + word = load_word(&buf[p], SWAP_NO); + debug("%s: word %x %x/%x\n", __func__, word, p, (u32)&buf[p]); + + /* Find the first bitstream dummy word */ + if (word == DUMMY_WORD) { + debug("%s: Found dummy word at position %x/%x\n", + __func__, p, (u32)&buf[p]); + *swap = check_header(&buf[p]); + if (*swap) { + /* FIXME add full bitstream checking here */ + return &buf[p]; + } + } + /* Loop can be huge - support CTRL + C */ + if (ctrlc()) + return 0; + } + return 0; +} + + +int zynq_load(Xilinx_desc *desc, const void *buf, size_t bsize) +{ + unsigned long ts; /* Timestamp */ + u32 partialbit = 0; + u32 i, control, isr_status, status, swap, diff; + u32 *buf_start; + + /* Detect if we are going working with partial or full bitstream */ + if (bsize != desc->size) { + printf("%s: Working with partial bitstream\n", __func__); + partialbit = 1; + } + + buf_start = check_data((u8 *)buf, bsize, &swap); + if (!buf_start) + return FPGA_FAIL; + + /* Check if data is postpone from start */ + diff = (u32)buf_start - (u32)buf; + if (diff) { + printf("%s: Bitstream is not validated yet (diff %x)\n", + __func__, diff); + return FPGA_FAIL; + } + + if ((u32)buf_start & 0x3) { + u32 *new_buf = (u32 *)((u32)buf & ~0x3); + + printf("%s: Align buffer at %x to %x(swap %d)\n", __func__, + (u32)buf_start, (u32)new_buf, swap); + + for (i = 0; i < (bsize/4); i++) + new_buf[i] = load_word(&buf_start[i], swap); + + swap = SWAP_DONE; + buf = new_buf; + } else if (swap != SWAP_DONE) { + /* For bitstream which are aligned */ + u32 *new_buf = (u32 *)buf; + + printf("%s: Bitstream is not swapped(%d) - swap it\n", __func__, + swap); + + for (i = 0; i < (bsize/4); i++) + new_buf[i] = load_word(&buf_start[i], swap); + + swap = SWAP_DONE; + } + + if (!partialbit) { + zynq_slcr_devcfg_disable(); + + /* Setting PCFG_PROG_B signal to high */ + control = readl(&devcfg_base->ctrl); + writel(control | DEVCFG_CTRL_PCFG_PROG_B, &devcfg_base->ctrl); + /* Setting PCFG_PROG_B signal to low */ + writel(control & ~DEVCFG_CTRL_PCFG_PROG_B, &devcfg_base->ctrl); + + /* Polling the PCAP_INIT status for Reset */ + ts = get_timer(0); + while (readl(&devcfg_base->status) & DEVCFG_STATUS_PCFG_INIT) { + if (get_timer(ts) > CONFIG_SYS_FPGA_WAIT) { + printf("%s: Timeout wait for INIT to clear\n", + __func__); + return FPGA_FAIL; + } + } + + /* Setting PCFG_PROG_B signal to high */ + writel(control | DEVCFG_CTRL_PCFG_PROG_B, &devcfg_base->ctrl); + + /* Polling the PCAP_INIT status for Set */ + ts = get_timer(0); + while (!(readl(&devcfg_base->status) & + DEVCFG_STATUS_PCFG_INIT)) { + if (get_timer(ts) > CONFIG_SYS_FPGA_WAIT) { + printf("%s: Timeout wait for INIT to set\n", + __func__); + return FPGA_FAIL; + } + } + } + + isr_status = readl(&devcfg_base->int_sts); + + /* Clear it all, so if Boot ROM comes back, it can proceed */ + writel(0xFFFFFFFF, &devcfg_base->int_sts); + + if (isr_status & DEVCFG_ISR_FATAL_ERROR_MASK) { + debug("%s: Fatal errors in PCAP 0x%X\n", __func__, isr_status); + + /* If RX FIFO overflow, need to flush RX FIFO first */ + if (isr_status & DEVCFG_ISR_RX_FIFO_OV) { + writel(DEVCFG_MCTRL_RFIFO_FLUSH, &devcfg_base->mctrl); + writel(0xFFFFFFFF, &devcfg_base->int_sts); + } + return FPGA_FAIL; + } + + status = readl(&devcfg_base->status); + + debug("%s: Status = 0x%08X\n", __func__, status); + + if (status & DEVCFG_STATUS_DMA_CMD_Q_F) { + debug("%s: Error: device busy\n", __func__); + return FPGA_FAIL; + } + + debug("%s: Device ready\n", __func__); + + if (!(status & DEVCFG_STATUS_DMA_CMD_Q_E)) { + if (!(readl(&devcfg_base->int_sts) & DEVCFG_ISR_DMA_DONE)) { + /* Error state, transfer cannot occur */ + debug("%s: ISR indicates error\n", __func__); + return FPGA_FAIL; + } else { + /* Clear out the status */ + writel(DEVCFG_ISR_DMA_DONE, &devcfg_base->int_sts); + } + } + + if (status & DEVCFG_STATUS_DMA_DONE_CNT_MASK) { + /* Clear the count of completed DMA transfers */ + writel(DEVCFG_STATUS_DMA_DONE_CNT_MASK, &devcfg_base->status); + } + + debug("%s: Source = 0x%08X\n", __func__, (u32)buf); + debug("%s: Size = %zu\n", __func__, bsize); + + /* Set up the transfer */ + writel((u32)buf | 1, &devcfg_base->dma_src_addr); + writel(0xFFFFFFFF, &devcfg_base->dma_dst_addr); + writel(bsize >> 2, &devcfg_base->dma_src_len); + writel(0, &devcfg_base->dma_dst_len); + + isr_status = readl(&devcfg_base->int_sts); + + /* Polling the PCAP_INIT status for Set */ + ts = get_timer(0); + while (!(isr_status & DEVCFG_ISR_DMA_DONE)) { + if (isr_status & DEVCFG_ISR_ERROR_FLAGS_MASK) { + debug("%s: Error: isr = 0x%08X\n", __func__, + isr_status); + debug("%s: Write count = 0x%08X\n", __func__, + readl(&devcfg_base->write_count)); + debug("%s: Read count = 0x%08X\n", __func__, + readl(&devcfg_base->read_count)); + + return FPGA_FAIL; + } + if (get_timer(ts) > CONFIG_SYS_FPGA_PROG_TIME) { + printf("%s: Timeout wait for DMA to complete\n", + __func__); + return FPGA_FAIL; + } + isr_status = readl(&devcfg_base->int_sts); + } + + debug("%s: DMA transfer is done\n", __func__); + + /* Check FPGA configuration completion */ + ts = get_timer(0); + while (!(isr_status & DEVCFG_ISR_PCFG_DONE)) { + if (get_timer(ts) > CONFIG_SYS_FPGA_WAIT) { + printf("%s: Timeout wait for FPGA to config\n", + __func__); + return FPGA_FAIL; + } + isr_status = readl(&devcfg_base->int_sts); + } + + debug("%s: FPGA config done\n", __func__); + + /* Clear out the DMA status */ + writel(DEVCFG_ISR_DMA_DONE, &devcfg_base->int_sts); + + if (!partialbit) + zynq_slcr_devcfg_enable(); + + return FPGA_SUCCESS; +} + +int zynq_dump(Xilinx_desc *desc, const void *buf, size_t bsize) +{ + return FPGA_FAIL; +} diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile index 5dbdbe3..72e85a3 100644 --- a/drivers/i2c/Makefile +++ b/drivers/i2c/Makefile @@ -46,6 +46,7 @@ COBJS-$(CONFIG_TSI108_I2C) += tsi108_i2c.o COBJS-$(CONFIG_U8500_I2C) += u8500_i2c.o COBJS-$(CONFIG_SH_I2C) += sh_i2c.o COBJS-$(CONFIG_SH_SH7734_I2C) += sh_sh7734_i2c.o +COBJS-$(CONFIG_ZYNQ_I2C) += zynq_i2c.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/i2c/zynq_i2c.c b/drivers/i2c/zynq_i2c.c new file mode 100644 index 0000000..ec49660 --- /dev/null +++ b/drivers/i2c/zynq_i2c.c @@ -0,0 +1,306 @@ +/* + * Driver for the Zynq-7000 PS I2C controller + * IP from Cadence (ID T-CS-PE-0007-100, Version R1p10f2) + * + * Author: Joe Hershberger <joe.hershberger@ni.com> + * Copyright (c) 2012 Joe Hershberger. + * + * Copyright (c) 2012-2013 Xilinx, Michal Simek + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <i2c.h> +#include <asm/errno.h> +#include <asm/arch/hardware.h> + +/* i2c register set */ +struct zynq_i2c_registers { + u32 control; + u32 status; + u32 address; + u32 data; + u32 interrupt_status; + u32 transfer_size; + u32 slave_mon_pause; + u32 time_out; + u32 interrupt_mask; + u32 interrupt_enable; + u32 interrupt_disable; +}; + +/* Control register fields */ +#define ZYNQ_I2C_CONTROL_RW 0x00000001 +#define ZYNQ_I2C_CONTROL_MS 0x00000002 +#define ZYNQ_I2C_CONTROL_NEA 0x00000004 +#define ZYNQ_I2C_CONTROL_ACKEN 0x00000008 +#define ZYNQ_I2C_CONTROL_HOLD 0x00000010 +#define ZYNQ_I2C_CONTROL_SLVMON 0x00000020 +#define ZYNQ_I2C_CONTROL_CLR_FIFO 0x00000040 +#define ZYNQ_I2C_CONTROL_DIV_B_SHIFT 8 +#define ZYNQ_I2C_CONTROL_DIV_B_MASK 0x00003F00 +#define ZYNQ_I2C_CONTROL_DIV_A_SHIFT 14 +#define ZYNQ_I2C_CONTROL_DIV_A_MASK 0x0000C000 + +/* Status register values */ +#define ZYNQ_I2C_STATUS_RXDV 0x00000020 +#define ZYNQ_I2C_STATUS_TXDV 0x00000040 +#define ZYNQ_I2C_STATUS_RXOVF 0x00000080 +#define ZYNQ_I2C_STATUS_BA 0x00000100 + +/* Interrupt register fields */ +#define ZYNQ_I2C_INTERRUPT_COMP 0x00000001 +#define ZYNQ_I2C_INTERRUPT_DATA 0x00000002 +#define ZYNQ_I2C_INTERRUPT_NACK 0x00000004 +#define ZYNQ_I2C_INTERRUPT_TO 0x00000008 +#define ZYNQ_I2C_INTERRUPT_SLVRDY 0x00000010 +#define ZYNQ_I2C_INTERRUPT_RXOVF 0x00000020 +#define ZYNQ_I2C_INTERRUPT_TXOVF 0x00000040 +#define ZYNQ_I2C_INTERRUPT_RXUNF 0x00000080 +#define ZYNQ_I2C_INTERRUPT_ARBLOST 0x00000200 + +#define ZYNQ_I2C_FIFO_DEPTH 16 +#define ZYNQ_I2C_TRANSFERT_SIZE_MAX 255 /* Controller transfer limit */ + +#if defined(CONFIG_ZYNQ_I2C0) +# define ZYNQ_I2C_BASE ZYNQ_I2C_BASEADDR0 +#else +# define ZYNQ_I2C_BASE ZYNQ_I2C_BASEADDR1 +#endif + +static struct zynq_i2c_registers *zynq_i2c = + (struct zynq_i2c_registers *)ZYNQ_I2C_BASE; + +/* I2C init called by cmd_i2c when doing 'i2c reset'. */ +void i2c_init(int requested_speed, int slaveadd) +{ + /* 111MHz / ( (3 * 17) * 22 ) = ~100KHz */ + writel((16 << ZYNQ_I2C_CONTROL_DIV_B_SHIFT) | + (2 << ZYNQ_I2C_CONTROL_DIV_A_SHIFT), &zynq_i2c->control); + + /* Enable master mode, ack, and 7-bit addressing */ + setbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_MS | + ZYNQ_I2C_CONTROL_ACKEN | ZYNQ_I2C_CONTROL_NEA); +} + +#ifdef DEBUG +static void zynq_i2c_debug_status(void) +{ + int int_status; + int status; + int_status = readl(&zynq_i2c->interrupt_status); + + status = readl(&zynq_i2c->status); + if (int_status || status) { + debug("Status: "); + if (int_status & ZYNQ_I2C_INTERRUPT_COMP) + debug("COMP "); + if (int_status & ZYNQ_I2C_INTERRUPT_DATA) + debug("DATA "); + if (int_status & ZYNQ_I2C_INTERRUPT_NACK) + debug("NACK "); + if (int_status & ZYNQ_I2C_INTERRUPT_TO) + debug("TO "); + if (int_status & ZYNQ_I2C_INTERRUPT_SLVRDY) + debug("SLVRDY "); + if (int_status & ZYNQ_I2C_INTERRUPT_RXOVF) + debug("RXOVF "); + if (int_status & ZYNQ_I2C_INTERRUPT_TXOVF) + debug("TXOVF "); + if (int_status & ZYNQ_I2C_INTERRUPT_RXUNF) + debug("RXUNF "); + if (int_status & ZYNQ_I2C_INTERRUPT_ARBLOST) + debug("ARBLOST "); + if (status & ZYNQ_I2C_STATUS_RXDV) + debug("RXDV "); + if (status & ZYNQ_I2C_STATUS_TXDV) + debug("TXDV "); + if (status & ZYNQ_I2C_STATUS_RXOVF) + debug("RXOVF "); + if (status & ZYNQ_I2C_STATUS_BA) + debug("BA "); + debug("TS%d ", readl(&zynq_i2c->transfer_size)); + debug("\n"); + } +} +#endif + +/* Wait for an interrupt */ +static u32 zynq_i2c_wait(u32 mask) +{ + int timeout, int_status; + + for (timeout = 0; timeout < 100; timeout++) { + udelay(100); + int_status = readl(&zynq_i2c->interrupt_status); + if (int_status & mask) + break; + } +#ifdef DEBUG + zynq_i2c_debug_status(); +#endif + /* Clear interrupt status flags */ + writel(int_status & mask, &zynq_i2c->interrupt_status); + + return int_status & mask; +} + +/* + * I2C probe called by cmd_i2c when doing 'i2c probe'. + * Begin read, nak data byte, end. + */ +int i2c_probe(u8 dev) +{ + /* Attempt to read a byte */ + setbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_CLR_FIFO | + ZYNQ_I2C_CONTROL_RW); + clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_HOLD); + writel(0xFF, &zynq_i2c->interrupt_status); + writel(dev, &zynq_i2c->address); + writel(1, &zynq_i2c->transfer_size); + + return (zynq_i2c_wait(ZYNQ_I2C_INTERRUPT_COMP | + ZYNQ_I2C_INTERRUPT_NACK) & + ZYNQ_I2C_INTERRUPT_COMP) ? 0 : -ETIMEDOUT; +} + +/* + * I2C read called by cmd_i2c when doing 'i2c read' and by cmd_eeprom.c + * Begin write, send address byte(s), begin read, receive data bytes, end. + */ +int i2c_read(u8 dev, uint addr, int alen, u8 *data, int length) +{ + u32 status; + u32 i = 0; + u8 *cur_data = data; + + /* Check the hardware can handle the requested bytes */ + if ((length < 0) || (length > ZYNQ_I2C_TRANSFERT_SIZE_MAX)) + return -EINVAL; + + /* Write the register address */ + setbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_CLR_FIFO | + ZYNQ_I2C_CONTROL_HOLD); + /* + * Temporarily disable restart (by clearing hold) + * It doesn't seem to work. + */ + clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_RW | + ZYNQ_I2C_CONTROL_HOLD); + writel(0xFF, &zynq_i2c->interrupt_status); + while (alen--) + writel(addr >> (8*alen), &zynq_i2c->data); + writel(dev, &zynq_i2c->address); + + /* Wait for the address to be sent */ + if (!zynq_i2c_wait(ZYNQ_I2C_INTERRUPT_COMP)) { + /* Release the bus */ + clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_HOLD); + return -ETIMEDOUT; + } + debug("Device acked address\n"); + + setbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_CLR_FIFO | + ZYNQ_I2C_CONTROL_RW); + /* Start reading data */ + writel(dev, &zynq_i2c->address); + writel(length, &zynq_i2c->transfer_size); + + /* Wait for data */ + do { + status = zynq_i2c_wait(ZYNQ_I2C_INTERRUPT_COMP | + ZYNQ_I2C_INTERRUPT_DATA); + if (!status) { + /* Release the bus */ + clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_HOLD); + return -ETIMEDOUT; + } + debug("Read %d bytes\n", + length - readl(&zynq_i2c->transfer_size)); + for (; i < length - readl(&zynq_i2c->transfer_size); i++) + *(cur_data++) = readl(&zynq_i2c->data); + } while (readl(&zynq_i2c->transfer_size) != 0); + /* All done... release the bus */ + clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_HOLD); + +#ifdef DEBUG + zynq_i2c_debug_status(); +#endif + return 0; +} + +/* + * I2C write called by cmd_i2c when doing 'i2c write' and by cmd_eeprom.c + * Begin write, send address byte(s), send data bytes, end. + */ +int i2c_write(u8 dev, uint addr, int alen, u8 *data, int length) +{ + u8 *cur_data = data; + + /* Write the register address */ + setbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_CLR_FIFO | + ZYNQ_I2C_CONTROL_HOLD); + clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_RW); + writel(0xFF, &zynq_i2c->interrupt_status); + while (alen--) + writel(addr >> (8*alen), &zynq_i2c->data); + /* Start the tranfer */ + writel(dev, &zynq_i2c->address); + if (!zynq_i2c_wait(ZYNQ_I2C_INTERRUPT_COMP)) { + /* Release the bus */ + clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_HOLD); + return -ETIMEDOUT; + } + + debug("Device acked address\n"); + while (length--) { + writel(*(cur_data++), &zynq_i2c->data); + if (readl(&zynq_i2c->transfer_size) == ZYNQ_I2C_FIFO_DEPTH) { + if (!zynq_i2c_wait(ZYNQ_I2C_INTERRUPT_COMP)) { + /* Release the bus */ + clrbits_le32(&zynq_i2c->control, + ZYNQ_I2C_CONTROL_HOLD); + return -ETIMEDOUT; + } + } + } + + /* All done... release the bus */ + clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_HOLD); + /* Wait for the address and data to be sent */ + if (!zynq_i2c_wait(ZYNQ_I2C_INTERRUPT_COMP)) + return -ETIMEDOUT; + return 0; +} + +int i2c_set_bus_num(unsigned int bus) +{ + /* Only support bus 0 */ + if (bus > 0) + return -1; + return 0; +} + +unsigned int i2c_get_bus_num(void) +{ + /* Only support bus 0 */ + return 0; +} diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 8cdc3b6..5d869b4 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -28,8 +28,10 @@ LIB := $(obj)libmisc.o COBJS-$(CONFIG_ALI152X) += ali512x.o COBJS-$(CONFIG_DS4510) += ds4510.o COBJS-$(CONFIG_CBMEM_CONSOLE) += cbmem_console.o +COBJS-$(CONFIG_FSL_IIM) += fsl_iim.o COBJS-$(CONFIG_GPIO_LED) += gpio_led.o COBJS-$(CONFIG_FSL_MC9SDZ60) += mc9sdz60.o +COBJS-$(CONFIG_MXC_OCOTP) += mxc_ocotp.o COBJS-$(CONFIG_NS87308) += ns87308.o COBJS-$(CONFIG_PDSP188x) += pdsp188x.o COBJS-$(CONFIG_STATUS_LED) += status_led.o diff --git a/drivers/misc/fsl_iim.c b/drivers/misc/fsl_iim.c new file mode 100644 index 0000000..9179fbb --- /dev/null +++ b/drivers/misc/fsl_iim.c @@ -0,0 +1,286 @@ +/* + * (C) Copyright 2009-2013 ADVANSEE + * Benoît Thébaudeau <benoit.thebaudeau@advansee.com> + * + * Based on the mpc512x iim code: + * Copyright 2008 Silicon Turnkey Express, Inc. + * Martha Marx <mmarx@silicontkx.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <fuse.h> +#include <asm/errno.h> +#include <asm/io.h> +#ifndef CONFIG_MPC512X +#include <asm/arch/imx-regs.h> +#endif + +/* FSL IIM-specific constants */ +#define STAT_BUSY 0x80 +#define STAT_PRGD 0x02 +#define STAT_SNSD 0x01 + +#define STATM_PRGD_M 0x02 +#define STATM_SNSD_M 0x01 + +#define ERR_PRGE 0x80 +#define ERR_WPE 0x40 +#define ERR_OPE 0x20 +#define ERR_RPE 0x10 +#define ERR_WLRE 0x08 +#define ERR_SNSE 0x04 +#define ERR_PARITYE 0x02 + +#define EMASK_PRGE_M 0x80 +#define EMASK_WPE_M 0x40 +#define EMASK_OPE_M 0x20 +#define EMASK_RPE_M 0x10 +#define EMASK_WLRE_M 0x08 +#define EMASK_SNSE_M 0x04 +#define EMASK_PARITYE_M 0x02 + +#define FCTL_DPC 0x80 +#define FCTL_PRG_LENGTH_MASK 0x70 +#define FCTL_ESNS_N 0x08 +#define FCTL_ESNS_0 0x04 +#define FCTL_ESNS_1 0x02 +#define FCTL_PRG 0x01 + +#define UA_A_BANK_MASK 0x38 +#define UA_A_ROWH_MASK 0x07 + +#define LA_A_ROWL_MASK 0xf8 +#define LA_A_BIT_MASK 0x07 + +#define PREV_PROD_REV_MASK 0xf8 +#define PREV_PROD_VT_MASK 0x07 + +/* Select the correct accessors depending on endianness */ +#if __BYTE_ORDER == __LITTLE_ENDIAN +#define iim_read32 in_le32 +#define iim_write32 out_le32 +#define iim_clrsetbits32 clrsetbits_le32 +#define iim_clrbits32 clrbits_le32 +#define iim_setbits32 setbits_le32 +#elif __BYTE_ORDER == __BIG_ENDIAN +#define iim_read32 in_be32 +#define iim_write32 out_be32 +#define iim_clrsetbits32 clrsetbits_be32 +#define iim_clrbits32 clrbits_be32 +#define iim_setbits32 setbits_be32 +#else +#error Endianess is not defined: please fix to continue +#endif + +/* IIM control registers */ +struct fsl_iim { + u32 stat; + u32 statm; + u32 err; + u32 emask; + u32 fctl; + u32 ua; + u32 la; + u32 sdat; + u32 prev; + u32 srev; + u32 prg_p; + u32 scs[0x1f5]; + struct { + u32 word[0x100]; + } bank[8]; +}; + +static int prepare_access(struct fsl_iim **regs, u32 bank, u32 word, int assert, + const char *caller) +{ + *regs = (struct fsl_iim *)IIM_BASE_ADDR; + + if (bank >= ARRAY_SIZE((*regs)->bank) || + word >= ARRAY_SIZE((*regs)->bank[0].word) || + !assert) { + printf("fsl_iim %s(): Invalid argument\n", caller); + return -EINVAL; + } + + return 0; +} + +static void clear_status(struct fsl_iim *regs) +{ + iim_setbits32(®s->stat, 0); + iim_setbits32(®s->err, 0); +} + +static void finish_access(struct fsl_iim *regs, u32 *stat, u32 *err) +{ + *stat = iim_read32(®s->stat); + *err = iim_read32(®s->err); + clear_status(regs); +} + +static int prepare_read(struct fsl_iim **regs, u32 bank, u32 word, u32 *val, + const char *caller) +{ + int ret; + + ret = prepare_access(regs, bank, word, val != NULL, caller); + if (ret) + return ret; + + clear_status(*regs); + + return 0; +} + +int fuse_read(u32 bank, u32 word, u32 *val) +{ + struct fsl_iim *regs; + u32 stat, err; + int ret; + + ret = prepare_read(®s, bank, word, val, __func__); + if (ret) + return ret; + + *val = iim_read32(®s->bank[bank].word[word]); + finish_access(regs, &stat, &err); + + if (err & ERR_RPE) { + puts("fsl_iim fuse_read(): Read protect error\n"); + return -EIO; + } + + return 0; +} + +static void direct_access(struct fsl_iim *regs, u32 bank, u32 word, u32 bit, + u32 fctl, u32 *stat, u32 *err) +{ + iim_write32(®s->ua, bank << 3 | word >> 5); + iim_write32(®s->la, (word << 3 | bit) & 0xff); + if (fctl == FCTL_PRG) + iim_write32(®s->prg_p, 0xaa); + iim_setbits32(®s->fctl, fctl); + while (iim_read32(®s->stat) & STAT_BUSY) + udelay(20); + finish_access(regs, stat, err); +} + +int fuse_sense(u32 bank, u32 word, u32 *val) +{ + struct fsl_iim *regs; + u32 stat, err; + int ret; + + ret = prepare_read(®s, bank, word, val, __func__); + if (ret) + return ret; + + direct_access(regs, bank, word, 0, FCTL_ESNS_N, &stat, &err); + + if (err & ERR_SNSE) { + puts("fsl_iim fuse_sense(): Explicit sense cycle error\n"); + return -EIO; + } + + if (!(stat & STAT_SNSD)) { + puts("fsl_iim fuse_sense(): Explicit sense cycle did not complete\n"); + return -EIO; + } + + *val = iim_read32(®s->sdat); + return 0; +} + +static int prog_bit(struct fsl_iim *regs, u32 bank, u32 word, u32 bit) +{ + u32 stat, err; + + clear_status(regs); + direct_access(regs, bank, word, bit, FCTL_PRG, &stat, &err); + iim_write32(®s->prg_p, 0x00); + + if (err & ERR_PRGE) { + puts("fsl_iim fuse_prog(): Program error\n"); + return -EIO; + } + + if (err & ERR_WPE) { + puts("fsl_iim fuse_prog(): Write protect error\n"); + return -EIO; + } + + if (!(stat & STAT_PRGD)) { + puts("fsl_iim fuse_prog(): Program did not complete\n"); + return -EIO; + } + + return 0; +} + +static int prepare_write(struct fsl_iim **regs, u32 bank, u32 word, u32 val, + const char *caller) +{ + return prepare_access(regs, bank, word, !(val & ~0xff), caller); +} + +int fuse_prog(u32 bank, u32 word, u32 val) +{ + struct fsl_iim *regs; + u32 bit; + int ret; + + ret = prepare_write(®s, bank, word, val, __func__); + if (ret) + return ret; + + for (bit = 0; val; bit++, val >>= 1) + if (val & 0x01) { + ret = prog_bit(regs, bank, word, bit); + if (ret) + return ret; + } + + return 0; +} + +int fuse_override(u32 bank, u32 word, u32 val) +{ + struct fsl_iim *regs; + u32 stat, err; + int ret; + + ret = prepare_write(®s, bank, word, val, __func__); + if (ret) + return ret; + + clear_status(regs); + iim_write32(®s->bank[bank].word[word], val); + finish_access(regs, &stat, &err); + + if (err & ERR_OPE) { + puts("fsl_iim fuse_override(): Override protect error\n"); + return -EIO; + } + + return 0; +} diff --git a/drivers/misc/mxc_ocotp.c b/drivers/misc/mxc_ocotp.c new file mode 100644 index 0000000..0095b47 --- /dev/null +++ b/drivers/misc/mxc_ocotp.c @@ -0,0 +1,216 @@ +/* + * (C) Copyright 2013 ADVANSEE + * Benoît Thébaudeau <benoit.thebaudeau@advansee.com> + * + * Based on Dirk Behme's + * https://github.com/dirkbehme/u-boot-imx6/blob/28b17e9/drivers/misc/imx_otp.c, + * which is based on Freescale's + * http://git.freescale.com/git/cgit.cgi/imx/uboot-imx.git/tree/drivers/misc/imx_otp.c?h=imx_v2009.08_1.1.0&id=9aa74e6, + * which is: + * Copyright (C) 2011 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <fuse.h> +#include <asm/errno.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/imx-regs.h> + +#define BO_CTRL_WR_UNLOCK 16 +#define BM_CTRL_WR_UNLOCK 0xffff0000 +#define BV_CTRL_WR_UNLOCK_KEY 0x3e77 +#define BM_CTRL_ERROR 0x00000200 +#define BM_CTRL_BUSY 0x00000100 +#define BO_CTRL_ADDR 0 +#define BM_CTRL_ADDR 0x0000007f + +#define BO_TIMING_STROBE_READ 16 +#define BM_TIMING_STROBE_READ 0x003f0000 +#define BV_TIMING_STROBE_READ_NS 37 +#define BO_TIMING_RELAX 12 +#define BM_TIMING_RELAX 0x0000f000 +#define BV_TIMING_RELAX_NS 17 +#define BO_TIMING_STROBE_PROG 0 +#define BM_TIMING_STROBE_PROG 0x00000fff +#define BV_TIMING_STROBE_PROG_US 10 + +#define BM_READ_CTRL_READ_FUSE 0x00000001 + +#define BF(value, field) (((value) << BO_##field) & BM_##field) + +#define WRITE_POSTAMBLE_US 2 + +static void wait_busy(struct ocotp_regs *regs, unsigned int delay_us) +{ + while (readl(®s->ctrl) & BM_CTRL_BUSY) + udelay(delay_us); +} + +static void clear_error(struct ocotp_regs *regs) +{ + writel(BM_CTRL_ERROR, ®s->ctrl_clr); +} + +static int prepare_access(struct ocotp_regs **regs, u32 bank, u32 word, + int assert, const char *caller) +{ + *regs = (struct ocotp_regs *)OCOTP_BASE_ADDR; + + if (bank >= ARRAY_SIZE((*regs)->bank) || + word >= ARRAY_SIZE((*regs)->bank[0].fuse_regs) >> 2 || + !assert) { + printf("mxc_ocotp %s(): Invalid argument\n", caller); + return -EINVAL; + } + + enable_ocotp_clk(1); + + wait_busy(*regs, 1); + clear_error(*regs); + + return 0; +} + +static int finish_access(struct ocotp_regs *regs, const char *caller) +{ + u32 err; + + err = !!(readl(®s->ctrl) & BM_CTRL_ERROR); + clear_error(regs); + + enable_ocotp_clk(0); + + if (err) { + printf("mxc_ocotp %s(): Access protect error\n", caller); + return -EIO; + } + + return 0; +} + +static int prepare_read(struct ocotp_regs **regs, u32 bank, u32 word, u32 *val, + const char *caller) +{ + return prepare_access(regs, bank, word, val != NULL, caller); +} + +int fuse_read(u32 bank, u32 word, u32 *val) +{ + struct ocotp_regs *regs; + int ret; + + ret = prepare_read(®s, bank, word, val, __func__); + if (ret) + return ret; + + *val = readl(®s->bank[bank].fuse_regs[word << 2]); + + return finish_access(regs, __func__); +} + +static void set_timing(struct ocotp_regs *regs) +{ + u32 ipg_clk; + u32 relax, strobe_read, strobe_prog; + u32 timing; + + ipg_clk = mxc_get_clock(MXC_IPG_CLK); + + relax = DIV_ROUND_UP(ipg_clk * BV_TIMING_RELAX_NS, 1000000000) - 1; + strobe_read = DIV_ROUND_UP(ipg_clk * BV_TIMING_STROBE_READ_NS, + 1000000000) + 2 * (relax + 1) - 1; + strobe_prog = DIV_ROUND(ipg_clk * BV_TIMING_STROBE_PROG_US, 1000000) + + 2 * (relax + 1) - 1; + + timing = BF(strobe_read, TIMING_STROBE_READ) | + BF(relax, TIMING_RELAX) | + BF(strobe_prog, TIMING_STROBE_PROG); + + clrsetbits_le32(®s->timing, BM_TIMING_STROBE_READ | BM_TIMING_RELAX | + BM_TIMING_STROBE_PROG, timing); +} + +static void setup_direct_access(struct ocotp_regs *regs, u32 bank, u32 word, + int write) +{ + u32 wr_unlock = write ? BV_CTRL_WR_UNLOCK_KEY : 0; + u32 addr = bank << 3 | word; + + set_timing(regs); + clrsetbits_le32(®s->ctrl, BM_CTRL_WR_UNLOCK | BM_CTRL_ADDR, + BF(wr_unlock, CTRL_WR_UNLOCK) | + BF(addr, CTRL_ADDR)); +} + +int fuse_sense(u32 bank, u32 word, u32 *val) +{ + struct ocotp_regs *regs; + int ret; + + ret = prepare_read(®s, bank, word, val, __func__); + if (ret) + return ret; + + setup_direct_access(regs, bank, word, false); + writel(BM_READ_CTRL_READ_FUSE, ®s->read_ctrl); + wait_busy(regs, 1); + *val = readl(®s->read_fuse_data); + + return finish_access(regs, __func__); +} + +static int prepare_write(struct ocotp_regs **regs, u32 bank, u32 word, + const char *caller) +{ + return prepare_access(regs, bank, word, true, caller); +} + +int fuse_prog(u32 bank, u32 word, u32 val) +{ + struct ocotp_regs *regs; + int ret; + + ret = prepare_write(®s, bank, word, __func__); + if (ret) + return ret; + + setup_direct_access(regs, bank, word, true); + writel(val, ®s->data); + wait_busy(regs, BV_TIMING_STROBE_PROG_US); + udelay(WRITE_POSTAMBLE_US); + + return finish_access(regs, __func__); +} + +int fuse_override(u32 bank, u32 word, u32 val) +{ + struct ocotp_regs *regs; + int ret; + + ret = prepare_write(®s, bank, word, __func__); + if (ret) + return ret; + + writel(val, ®s->bank[bank].fuse_regs[word << 2]); + + return finish_access(regs, __func__); +} diff --git a/drivers/misc/twl4030_led.c b/drivers/misc/twl4030_led.c index 33cea11..e150d8f 100644 --- a/drivers/misc/twl4030_led.c +++ b/drivers/misc/twl4030_led.c @@ -42,7 +42,7 @@ void twl4030_led_init(unsigned char ledon_mask) if (ledon_mask & TWL4030_LED_LEDEN_LEDBON) ledon_mask |= TWL4030_LED_LEDEN_LEDBPWM; - twl4030_i2c_write_u8(TWL4030_CHIP_LED, ledon_mask, - TWL4030_LED_LEDEN); + twl4030_i2c_write_u8(TWL4030_CHIP_LED, TWL4030_LED_LEDEN, + ledon_mask); } diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index 2b58178..24648a2 100644 --- a/drivers/mmc/Makefile +++ b/drivers/mmc/Makefile @@ -47,6 +47,7 @@ COBJS-$(CONFIG_SPEAR_SDHCI) += spear_sdhci.o COBJS-$(CONFIG_TEGRA_MMC) += tegra_mmc.o COBJS-$(CONFIG_DWMMC) += dw_mmc.o COBJS-$(CONFIG_EXYNOS_DWMMC) += exynos_dw_mmc.o +COBJS-$(CONFIG_ZYNQ_SDHCI) += zynq_sdhci.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/mmc/gen_atmel_mci.c b/drivers/mmc/gen_atmel_mci.c index 70a9f91..77ebf17 100644 --- a/drivers/mmc/gen_atmel_mci.c +++ b/drivers/mmc/gen_atmel_mci.c @@ -50,6 +50,12 @@ static int initialized = 0; +/* Read Atmel MCI IP version */ +static unsigned int atmel_mci_get_version(struct atmel_mci *mci) +{ + return readl(&mci->version) & 0x00000fff; +} + /* * Print command and status: * @@ -205,7 +211,10 @@ mci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) /* Wait for the command to complete */ while (!((status = readl(&mci->sr)) & MMCI_BIT(CMDRDY))); - if (status & error_flags) { + if ((status & error_flags) & MMCI_BIT(RTOE)) { + dump_cmd(cmdr, cmd->cmdarg, status, "Command Time Out"); + return TIMEOUT; + } else if (status & error_flags) { dump_cmd(cmdr, cmd->cmdarg, status, "Command Failed"); return COMM_ERR; } @@ -297,7 +306,9 @@ mci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) static void mci_set_ios(struct mmc *mmc) { atmel_mci_t *mci = (atmel_mci_t *)mmc->priv; - int busw = (mmc->bus_width == 4) ? 1 : 0; + int bus_width = mmc->bus_width; + unsigned int version = atmel_mci_get_version(mci); + int busw; /* Set the clock speed */ mci_set_mode(mmc, mmc->clock, MMC_DEFAULT_BLKLEN); @@ -305,9 +316,26 @@ static void mci_set_ios(struct mmc *mmc) /* * set the bus width and select slot for this interface * there is no capability for multiple slots on the same interface yet - * Bitfield SCDBUS needs to be expanded to 2 bits for 8-bit buses */ - writel(MMCI_BF(SCDBUS, busw) | MMCI_BF(SCDSEL, MCI_BUS), &mci->sdcr); + if ((version & 0xf00) >= 0x300) { + switch (bus_width) { + case 8: + busw = 3; + break; + case 4: + busw = 2; + break; + default: + busw = 0; + break; + } + + writel(busw << 6 | MMCI_BF(SCDSEL, MCI_BUS), &mci->sdcr); + } else { + busw = (bus_width == 4) ? 1 : 0; + + writel(busw << 7 | MMCI_BF(SCDSEL, MCI_BUS), &mci->sdcr); + } } /* Entered into mmc structure during driver init */ @@ -340,9 +368,12 @@ static int mci_init(struct mmc *mmc) int atmel_mci_init(void *regs) { struct mmc *mmc = malloc(sizeof(struct mmc)); + struct atmel_mci *mci; + unsigned int version; if (!mmc) return -1; + strcpy(mmc->name, "mci"); mmc->priv = regs; mmc->send_cmd = mci_send_cmd; @@ -353,7 +384,13 @@ int atmel_mci_init(void *regs) /* need to be able to pass these in on a board by board basis */ mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34; - mmc->host_caps = MMC_MODE_4BIT; + mci = (struct atmel_mci *)mmc->priv; + version = atmel_mci_get_version(mci); + if ((version & 0xf00) >= 0x300) + mmc->host_caps = MMC_MODE_8BIT; + + mmc->host_caps |= MMC_MODE_4BIT; + /* * min and max frequencies determined by * max and min of clock divider diff --git a/drivers/mmc/mxsmmc.c b/drivers/mmc/mxsmmc.c index a89660f..fdaf9c7 100644 --- a/drivers/mmc/mxsmmc.c +++ b/drivers/mmc/mxsmmc.c @@ -41,7 +41,7 @@ #include <asm/arch/clock.h> #include <asm/arch/imx-regs.h> #include <asm/arch/sys_proto.h> -#include <asm/arch/dma.h> +#include <asm/imx-common/dma.h> #include <bouncebuf.h> struct mxsmmc_priv { diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c index 166744c..afdfa88 100644 --- a/drivers/mmc/omap_hsmmc.c +++ b/drivers/mmc/omap_hsmmc.c @@ -29,7 +29,7 @@ #include <i2c.h> #include <twl4030.h> #include <twl6030.h> -#include <twl6035.h> +#include <palmas.h> #include <asm/gpio.h> #include <asm/io.h> #include <asm/arch/mmc_host_def.h> @@ -107,7 +107,7 @@ static void omap4_vmmc_pbias_config(struct mmc *mmc) } #endif -#if defined(CONFIG_OMAP54XX) && defined(CONFIG_TWL6035_POWER) +#if defined(CONFIG_OMAP54XX) && defined(CONFIG_PALMAS_POWER) static void omap5_pbias_config(struct mmc *mmc) { u32 value = 0; @@ -117,7 +117,7 @@ static void omap5_pbias_config(struct mmc *mmc) value |= SDCARD_BIAS_HIZ_MODE; writel(value, (*ctrl)->control_pbias); - twl6035_mmc1_poweron_ldo(); + palmas_mmc1_poweron_ldo(); value = readl((*ctrl)->control_pbias); value &= ~SDCARD_BIAS_HIZ_MODE; @@ -178,7 +178,7 @@ unsigned char mmc_board_init(struct mmc *mmc) if (mmc->block_dev.dev == 0) omap4_vmmc_pbias_config(mmc); #endif -#if defined(CONFIG_OMAP54XX) && defined(CONFIG_TWL6035_POWER) +#if defined(CONFIG_OMAP54XX) && defined(CONFIG_PALMAS_POWER) if (mmc->block_dev.dev == 0) omap5_pbias_config(mmc); #endif diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c new file mode 100644 index 0000000..9e37af4 --- /dev/null +++ b/drivers/mmc/zynq_sdhci.c @@ -0,0 +1,40 @@ +/* + * (C) Copyright 2013 Inc. + * + * Xilinx Zynq SD Host Controller Interface + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 Temple + * Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <common.h> +#include <malloc.h> +#include <sdhci.h> +#include <asm/arch/sys_proto.h> + +int zynq_sdhci_init(u32 regbase) +{ + struct sdhci_host *host = NULL; + + host = (struct sdhci_host *)malloc(sizeof(struct sdhci_host)); + if (!host) { + printf("zynq_sdhci_init: sdhci_host malloc fail\n"); + return 1; + } + + host->name = "zynq_sdhci"; + host->ioaddr = (void *)regbase; + host->quirks = SDHCI_QUIRK_NO_CD | SDHCI_QUIRK_WAIT_SEND_CMD; + host->version = sdhci_readw(host, SDHCI_HOST_VERSION); + + host->host_caps = MMC_MODE_HC; + + add_sdhci(host, 52000000, 52000000 >> 9); + return 0; +} diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index 35769c5..8821704 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -34,6 +34,7 @@ NORMAL_DRIVERS=y endif COBJS-$(CONFIG_SPL_NAND_AM33XX_BCH) += am335x_spl_bch.o +COBJS-$(CONFIG_SPL_NAND_DOCG4) += docg4_spl.o COBJS-$(CONFIG_SPL_NAND_SIMPLE) += nand_spl_simple.o COBJS-$(CONFIG_SPL_NAND_LOAD) += nand_spl_load.o COBJS-$(CONFIG_SPL_NAND_ECC) += nand_ecc.o @@ -77,6 +78,7 @@ COBJS-$(CONFIG_NAND_SPEAR) += spr_nand.o COBJS-$(CONFIG_TEGRA_NAND) += tegra_nand.o COBJS-$(CONFIG_NAND_OMAP_GPMC) += omap_gpmc.o COBJS-$(CONFIG_NAND_PLAT) += nand_plat.o +COBJS-$(CONFIG_NAND_DOCG4) += docg4.o else # minimal SPL drivers diff --git a/drivers/mtd/nand/docg4.c b/drivers/mtd/nand/docg4.c new file mode 100644 index 0000000..7dd9953 --- /dev/null +++ b/drivers/mtd/nand/docg4.c @@ -0,0 +1,1028 @@ +/* + * drivers/mtd/nand/docg4.c + * + * Copyright (C) 2013 Mike Dunn <mikedunn@newsguy.com> + * + * This file is released under the terms of GPL v2 and any later version. + * See the file COPYING in the root directory of the source tree for details. + * + * mtd nand driver for M-Systems DiskOnChip G4 + * + * Tested on the Palm Treo 680. The G4 is also present on Toshiba Portege, Asus + * P526, some HTC smartphones (Wizard, Prophet, ...), O2 XDA Zinc, maybe others. + * Should work on these as well. Let me know! + * + * TODO: + * + * Mechanism for management of password-protected areas + * + * Hamming ecc when reading oob only + * + * According to the M-Sys documentation, this device is also available in a + * "dual-die" configuration having a 256MB capacity, but no mechanism for + * detecting this variant is documented. Currently this driver assumes 128MB + * capacity. + * + * Support for multiple cascaded devices ("floors"). Not sure which gadgets + * contain multiple G4s in a cascaded configuration, if any. + * + */ + + +#include <common.h> +#include <asm/arch/hardware.h> +#include <asm/io.h> +#include <asm/bitops.h> +#include <asm/errno.h> +#include <malloc.h> +#include <nand.h> +#include <linux/bch.h> +#include <linux/bitrev.h> +#include <linux/mtd/docg4.h> + +/* + * The device has a nop register which M-Sys claims is for the purpose of + * inserting precise delays. But beware; at least some operations fail if the + * nop writes are replaced with a generic delay! + */ +static inline void write_nop(void __iomem *docptr) +{ + writew(0, docptr + DOC_NOP); +} + + +static int poll_status(void __iomem *docptr) +{ + /* + * Busy-wait for the FLASHREADY bit to be set in the FLASHCONTROL + * register. Operations known to take a long time (e.g., block erase) + * should sleep for a while before calling this. + */ + + uint8_t flash_status; + + /* hardware quirk requires reading twice initially */ + flash_status = readb(docptr + DOC_FLASHCONTROL); + + do { + flash_status = readb(docptr + DOC_FLASHCONTROL); + } while (!(flash_status & DOC_CTRL_FLASHREADY)); + + return 0; +} + +static void write_addr(void __iomem *docptr, uint32_t docg4_addr) +{ + /* write the four address bytes packed in docg4_addr to the device */ + + writeb(docg4_addr & 0xff, docptr + DOC_FLASHADDRESS); + docg4_addr >>= 8; + writeb(docg4_addr & 0xff, docptr + DOC_FLASHADDRESS); + docg4_addr >>= 8; + writeb(docg4_addr & 0xff, docptr + DOC_FLASHADDRESS); + docg4_addr >>= 8; + writeb(docg4_addr & 0xff, docptr + DOC_FLASHADDRESS); +} + +/* + * This is a module parameter in the linux kernel version of this driver. It is + * hard-coded to 'off' for u-boot. This driver uses oob to mark bad blocks. + * This can be problematic when dealing with data not intended for the mtd/nand + * subsystem. For example, on boards that boot from the docg4 and use the IPL + * to load an spl + u-boot image, the blocks containing the image will be + * reported as "bad" because the oob of the first page of each block contains a + * magic number that the IPL looks for, which causes the badblock scan to + * erroneously add them to the bad block table. To erase such a block, use + * u-boot's 'nand scrub'. scrub is safe for the docg4. The device does have a + * factory bad block table, but it is read-only, and is used in conjunction with + * oob bad block markers that are written by mtd/nand when a block is deemed to + * be bad. To read data from "bad" blocks, use 'read.raw'. Unfortunately, + * read.raw does not use ecc, which would still work fine on such misidentified + * bad blocks. TODO: u-boot nand utilities need the ability to ignore bad + * blocks. + */ +static const int ignore_badblocks; /* remains false */ + +struct docg4_priv { + int status; + struct { + unsigned int command; + int column; + int page; + } last_command; + uint8_t oob_buf[16]; + uint8_t ecc_buf[7]; + int oob_page; + struct bch_control *bch; +}; +/* + * Oob bytes 0 - 6 are available to the user. + * Byte 7 is hamming ecc for first 7 bytes. Bytes 8 - 14 are hw-generated ecc. + * Byte 15 (the last) is used by the driver as a "page written" flag. + */ +static struct nand_ecclayout docg4_oobinfo = { + .eccbytes = 9, + .eccpos = {7, 8, 9, 10, 11, 12, 13, 14, 15}, + .oobavail = 7, + .oobfree = { {0, 7} } +}; + +static void reset(void __iomem *docptr) +{ + /* full device reset */ + + writew(DOC_ASICMODE_RESET | DOC_ASICMODE_MDWREN, docptr + DOC_ASICMODE); + writew(~(DOC_ASICMODE_RESET | DOC_ASICMODE_MDWREN), + docptr + DOC_ASICMODECONFIRM); + write_nop(docptr); + + writew(DOC_ASICMODE_NORMAL | DOC_ASICMODE_MDWREN, + docptr + DOC_ASICMODE); + writew(~(DOC_ASICMODE_NORMAL | DOC_ASICMODE_MDWREN), + docptr + DOC_ASICMODECONFIRM); + + writew(DOC_ECCCONF1_ECC_ENABLE, docptr + DOC_ECCCONF1); + + poll_status(docptr); +} + +static void docg4_select_chip(struct mtd_info *mtd, int chip) +{ + /* + * Select among multiple cascaded chips ("floors"). Multiple floors are + * not yet supported, so the only valid non-negative value is 0. + */ + void __iomem *docptr = CONFIG_SYS_NAND_BASE; + + if (chip < 0) + return; /* deselected */ + + if (chip > 0) + printf("multiple floors currently unsupported\n"); + + writew(0, docptr + DOC_DEVICESELECT); +} + +static void read_hw_ecc(void __iomem *docptr, uint8_t *ecc_buf) +{ + /* read the 7 hw-generated ecc bytes */ + + int i; + for (i = 0; i < 7; i++) { /* hw quirk; read twice */ + ecc_buf[i] = readb(docptr + DOC_BCH_SYNDROM(i)); + ecc_buf[i] = readb(docptr + DOC_BCH_SYNDROM(i)); + } +} + +static int correct_data(struct mtd_info *mtd, uint8_t *buf, int page) +{ + /* + * Called after a page read when hardware reports bitflips. + * Up to four bitflips can be corrected. + */ + + struct nand_chip *nand = mtd->priv; + struct docg4_priv *doc = nand->priv; + void __iomem *docptr = CONFIG_SYS_NAND_BASE; + int i, numerrs; + unsigned int errpos[4]; + const uint8_t blank_read_hwecc[8] = { + 0xcf, 0x72, 0xfc, 0x1b, 0xa9, 0xc7, 0xb9, 0 }; + + read_hw_ecc(docptr, doc->ecc_buf); /* read 7 hw-generated ecc bytes */ + + /* check if read error is due to a blank page */ + if (!memcmp(doc->ecc_buf, blank_read_hwecc, 7)) + return 0; /* yes */ + + /* skip additional check of "written flag" if ignore_badblocks */ + if (!ignore_badblocks) { + /* + * If the hw ecc bytes are not those of a blank page, there's + * still a chance that the page is blank, but was read with + * errors. Check the "written flag" in last oob byte, which + * is set to zero when a page is written. If more than half + * the bits are set, assume a blank page. Unfortunately, the + * bit flips(s) are not reported in stats. + */ + + if (doc->oob_buf[15]) { + int bit, numsetbits = 0; + unsigned long written_flag = doc->oob_buf[15]; + + for (bit = 0; bit < 8; bit++) { + if (written_flag & 0x01) + numsetbits++; + written_flag >>= 1; + } + if (numsetbits > 4) { /* assume blank */ + printf("errors in blank page at offset %08x\n", + page * DOCG4_PAGE_SIZE); + return 0; + } + } + } + + /* + * The hardware ecc unit produces oob_ecc ^ calc_ecc. The kernel's bch + * algorithm is used to decode this. However the hw operates on page + * data in a bit order that is the reverse of that of the bch alg, + * requiring that the bits be reversed on the result. Thanks to Ivan + * Djelic for his analysis! + */ + for (i = 0; i < 7; i++) + doc->ecc_buf[i] = bitrev8(doc->ecc_buf[i]); + + numerrs = decode_bch(doc->bch, NULL, DOCG4_USERDATA_LEN, NULL, + doc->ecc_buf, NULL, errpos); + + if (numerrs == -EBADMSG) { + printf("uncorrectable errors at offset %08x\n", + page * DOCG4_PAGE_SIZE); + return -EBADMSG; + } + + BUG_ON(numerrs < 0); /* -EINVAL, or anything other than -EBADMSG */ + + /* undo last step in BCH alg (modulo mirroring not needed) */ + for (i = 0; i < numerrs; i++) + errpos[i] = (errpos[i] & ~7)|(7-(errpos[i] & 7)); + + /* fix the errors */ + for (i = 0; i < numerrs; i++) { + /* ignore if error within oob ecc bytes */ + if (errpos[i] > DOCG4_USERDATA_LEN * 8) + continue; + + /* if error within oob area preceeding ecc bytes... */ + if (errpos[i] > DOCG4_PAGE_SIZE * 8) + __change_bit(errpos[i] - DOCG4_PAGE_SIZE * 8, + (unsigned long *)doc->oob_buf); + + else /* error in page data */ + __change_bit(errpos[i], (unsigned long *)buf); + } + + printf("%d error(s) corrected at offset %08x\n", + numerrs, page * DOCG4_PAGE_SIZE); + + return numerrs; +} + +static int read_progstatus(struct docg4_priv *doc, void __iomem *docptr) +{ + /* + * This apparently checks the status of programming. Done after an + * erasure, and after page data is written. On error, the status is + * saved, to be later retrieved by the nand infrastructure code. + */ + + /* status is read from the I/O reg */ + uint16_t status1 = readw(docptr + DOC_IOSPACE_DATA); + uint16_t status2 = readw(docptr + DOC_IOSPACE_DATA); + uint16_t status3 = readw(docptr + DOCG4_MYSTERY_REG); + + MTDDEBUG(MTD_DEBUG_LEVEL3, "docg4: %s: %02x %02x %02x\n", + __func__, status1, status2, status3); + + if (status1 != DOCG4_PROGSTATUS_GOOD || + status2 != DOCG4_PROGSTATUS_GOOD_2 || + status3 != DOCG4_PROGSTATUS_GOOD_2) { + doc->status = NAND_STATUS_FAIL; + printf("read_progstatus failed: %02x, %02x, %02x\n", + status1, status2, status3); + return -EIO; + } + return 0; +} + +static int pageprog(struct mtd_info *mtd) +{ + /* + * Final step in writing a page. Writes the contents of its + * internal buffer out to the flash array, or some such. + */ + + struct nand_chip *nand = mtd->priv; + struct docg4_priv *doc = nand->priv; + void __iomem *docptr = CONFIG_SYS_NAND_BASE; + int retval = 0; + + MTDDEBUG(MTD_DEBUG_LEVEL3, "docg4: %s\n", __func__); + + writew(DOCG4_SEQ_PAGEPROG, docptr + DOC_FLASHSEQUENCE); + writew(DOC_CMD_PROG_CYCLE2, docptr + DOC_FLASHCOMMAND); + write_nop(docptr); + write_nop(docptr); + + /* Just busy-wait; usleep_range() slows things down noticeably. */ + poll_status(docptr); + + writew(DOCG4_SEQ_FLUSH, docptr + DOC_FLASHSEQUENCE); + writew(DOCG4_CMD_FLUSH, docptr + DOC_FLASHCOMMAND); + writew(DOC_ECCCONF0_READ_MODE | 4, docptr + DOC_ECCCONF0); + write_nop(docptr); + write_nop(docptr); + write_nop(docptr); + write_nop(docptr); + write_nop(docptr); + + retval = read_progstatus(doc, docptr); + writew(0, docptr + DOC_DATAEND); + write_nop(docptr); + poll_status(docptr); + write_nop(docptr); + + return retval; +} + +static void sequence_reset(void __iomem *docptr) +{ + /* common starting sequence for all operations */ + + writew(DOC_CTRL_UNKNOWN | DOC_CTRL_CE, docptr + DOC_FLASHCONTROL); + writew(DOC_SEQ_RESET, docptr + DOC_FLASHSEQUENCE); + writew(DOC_CMD_RESET, docptr + DOC_FLASHCOMMAND); + write_nop(docptr); + write_nop(docptr); + poll_status(docptr); + write_nop(docptr); +} + +static void read_page_prologue(void __iomem *docptr, uint32_t docg4_addr) +{ + /* first step in reading a page */ + + sequence_reset(docptr); + + writew(DOCG4_SEQ_PAGE_READ, docptr + DOC_FLASHSEQUENCE); + writew(DOCG4_CMD_PAGE_READ, docptr + DOC_FLASHCOMMAND); + write_nop(docptr); + + write_addr(docptr, docg4_addr); + + write_nop(docptr); + writew(DOCG4_CMD_READ2, docptr + DOC_FLASHCOMMAND); + write_nop(docptr); + write_nop(docptr); + + poll_status(docptr); +} + +static void write_page_prologue(void __iomem *docptr, uint32_t docg4_addr) +{ + /* first step in writing a page */ + + sequence_reset(docptr); + writew(DOCG4_SEQ_PAGEWRITE, docptr + DOC_FLASHSEQUENCE); + writew(DOCG4_CMD_PAGEWRITE, docptr + DOC_FLASHCOMMAND); + write_nop(docptr); + write_addr(docptr, docg4_addr); + write_nop(docptr); + write_nop(docptr); + poll_status(docptr); +} + +static uint32_t mtd_to_docg4_address(int page, int column) +{ + /* + * Convert mtd address to format used by the device, 32 bit packed. + * + * Some notes on G4 addressing... The M-Sys documentation on this device + * claims that pages are 2K in length, and indeed, the format of the + * address used by the device reflects that. But within each page are + * four 512 byte "sub-pages", each with its own oob data that is + * read/written immediately after the 512 bytes of page data. This oob + * data contains the ecc bytes for the preceeding 512 bytes. + * + * Rather than tell the mtd nand infrastructure that page size is 2k, + * with four sub-pages each, we engage in a little subterfuge and tell + * the infrastructure code that pages are 512 bytes in size. This is + * done because during the course of reverse-engineering the device, I + * never observed an instance where an entire 2K "page" was read or + * written as a unit. Each "sub-page" is always addressed individually, + * its data read/written, and ecc handled before the next "sub-page" is + * addressed. + * + * This requires us to convert addresses passed by the mtd nand + * infrastructure code to those used by the device. + * + * The address that is written to the device consists of four bytes: the + * first two are the 2k page number, and the second is the index into + * the page. The index is in terms of 16-bit half-words and includes + * the preceeding oob data, so e.g., the index into the second + * "sub-page" is 0x108, and the full device address of the start of mtd + * page 0x201 is 0x00800108. + */ + int g4_page = page / 4; /* device's 2K page */ + int g4_index = (page % 4) * 0x108 + column/2; /* offset into page */ + return (g4_page << 16) | g4_index; /* pack */ +} + +static void docg4_command(struct mtd_info *mtd, unsigned command, int column, + int page_addr) +{ + /* handle standard nand commands */ + + struct nand_chip *nand = mtd->priv; + struct docg4_priv *doc = nand->priv; + uint32_t g4_addr = mtd_to_docg4_address(page_addr, column); + + MTDDEBUG(MTD_DEBUG_LEVEL3, "%s %x, page_addr=%x, column=%x\n", + __func__, command, page_addr, column); + + /* + * Save the command and its arguments. This enables emulation of + * standard flash devices, and also some optimizations. + */ + doc->last_command.command = command; + doc->last_command.column = column; + doc->last_command.page = page_addr; + + switch (command) { + case NAND_CMD_RESET: + reset(CONFIG_SYS_NAND_BASE); + break; + + case NAND_CMD_READ0: + read_page_prologue(CONFIG_SYS_NAND_BASE, g4_addr); + break; + + case NAND_CMD_STATUS: + /* next call to read_byte() will expect a status */ + break; + + case NAND_CMD_SEQIN: + write_page_prologue(CONFIG_SYS_NAND_BASE, g4_addr); + + /* hack for deferred write of oob bytes */ + if (doc->oob_page == page_addr) + memcpy(nand->oob_poi, doc->oob_buf, 16); + break; + + case NAND_CMD_PAGEPROG: + pageprog(mtd); + break; + + /* we don't expect these, based on review of nand_base.c */ + case NAND_CMD_READOOB: + case NAND_CMD_READID: + case NAND_CMD_ERASE1: + case NAND_CMD_ERASE2: + printf("docg4_command: unexpected nand command 0x%x\n", + command); + break; + } +} + +static void docg4_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) +{ + int i; + struct nand_chip *nand = mtd->priv; + uint16_t *p = (uint16_t *)buf; + len >>= 1; + + for (i = 0; i < len; i++) + p[i] = readw(nand->IO_ADDR_R); +} + +static int docg4_read_oob(struct mtd_info *mtd, struct nand_chip *nand, + int page, int sndcmd) +{ + struct docg4_priv *doc = nand->priv; + void __iomem *docptr = CONFIG_SYS_NAND_BASE; + uint16_t status; + + MTDDEBUG(MTD_DEBUG_LEVEL3, "%s: page %x\n", __func__, page); + + /* + * Oob bytes are read as part of a normal page read. If the previous + * nand command was a read of the page whose oob is now being read, just + * copy the oob bytes that we saved in a local buffer and avoid a + * separate oob read. + */ + if (doc->last_command.command == NAND_CMD_READ0 && + doc->last_command.page == page) { + memcpy(nand->oob_poi, doc->oob_buf, 16); + return 0; + } + + /* + * Separate read of oob data only. + */ + docg4_command(mtd, NAND_CMD_READ0, nand->ecc.size, page); + + writew(DOC_ECCCONF0_READ_MODE | DOCG4_OOB_SIZE, docptr + DOC_ECCCONF0); + write_nop(docptr); + write_nop(docptr); + write_nop(docptr); + write_nop(docptr); + write_nop(docptr); + + /* the 1st byte from the I/O reg is a status; the rest is oob data */ + status = readw(docptr + DOC_IOSPACE_DATA); + if (status & DOCG4_READ_ERROR) { + printf("docg4_read_oob failed: status = 0x%02x\n", status); + return -EIO; + } + + MTDDEBUG(MTD_DEBUG_LEVEL3, "%s: status = 0x%x\n", __func__, status); + + docg4_read_buf(mtd, nand->oob_poi, 16); + + write_nop(docptr); + write_nop(docptr); + write_nop(docptr); + writew(0, docptr + DOC_DATAEND); + write_nop(docptr); + + return 0; +} + +static int docg4_write_oob(struct mtd_info *mtd, struct nand_chip *nand, + int page) +{ + /* + * Writing oob-only is not really supported, because MLC nand must write + * oob bytes at the same time as page data. Nonetheless, we save the + * oob buffer contents here, and then write it along with the page data + * if the same page is subsequently written. This allows user space + * utilities that write the oob data prior to the page data to work + * (e.g., nandwrite). The disdvantage is that, if the intention was to + * write oob only, the operation is quietly ignored. Also, oob can get + * corrupted if two concurrent processes are running nandwrite. + */ + + /* note that bytes 7..14 are hw generated hamming/ecc and overwritten */ + struct docg4_priv *doc = nand->priv; + doc->oob_page = page; + memcpy(doc->oob_buf, nand->oob_poi, 16); + return 0; +} + +static int docg4_block_neverbad(struct mtd_info *mtd, loff_t ofs, int getchip) +{ + /* only called when module_param ignore_badblocks is set */ + return 0; +} + +static void docg4_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len) +{ + int i; + struct nand_chip *nand = mtd->priv; + uint16_t *p = (uint16_t *)buf; + len >>= 1; + + for (i = 0; i < len; i++) + writew(p[i], nand->IO_ADDR_W); +} + +static void write_page(struct mtd_info *mtd, struct nand_chip *nand, + const uint8_t *buf, int use_ecc) +{ + void __iomem *docptr = CONFIG_SYS_NAND_BASE; + uint8_t ecc_buf[8]; + + writew(DOC_ECCCONF0_ECC_ENABLE | + DOC_ECCCONF0_UNKNOWN | + DOCG4_BCH_SIZE, + docptr + DOC_ECCCONF0); + write_nop(docptr); + + /* write the page data */ + docg4_write_buf16(mtd, buf, DOCG4_PAGE_SIZE); + + /* oob bytes 0 through 5 are written to I/O reg */ + docg4_write_buf16(mtd, nand->oob_poi, 6); + + /* oob byte 6 written to a separate reg */ + writew(nand->oob_poi[6], docptr + DOCG4_OOB_6_7); + + write_nop(docptr); + write_nop(docptr); + + /* write hw-generated ecc bytes to oob */ + if (likely(use_ecc)) { + /* oob byte 7 is hamming code */ + uint8_t hamming = readb(docptr + DOC_HAMMINGPARITY); + hamming = readb(docptr + DOC_HAMMINGPARITY); /* 2nd read */ + writew(hamming, docptr + DOCG4_OOB_6_7); + write_nop(docptr); + + /* read the 7 bch bytes from ecc regs */ + read_hw_ecc(docptr, ecc_buf); + ecc_buf[7] = 0; /* clear the "page written" flag */ + } + + /* write user-supplied bytes to oob */ + else { + writew(nand->oob_poi[7], docptr + DOCG4_OOB_6_7); + write_nop(docptr); + memcpy(ecc_buf, &nand->oob_poi[8], 8); + } + + docg4_write_buf16(mtd, ecc_buf, 8); + write_nop(docptr); + write_nop(docptr); + writew(0, docptr + DOC_DATAEND); + write_nop(docptr); +} + +static void docg4_write_page_raw(struct mtd_info *mtd, struct nand_chip *nand, + const uint8_t *buf) +{ + return write_page(mtd, nand, buf, 0); +} + +static void docg4_write_page(struct mtd_info *mtd, struct nand_chip *nand, + const uint8_t *buf) +{ + return write_page(mtd, nand, buf, 1); +} + +static int read_page(struct mtd_info *mtd, struct nand_chip *nand, + uint8_t *buf, int page, int use_ecc) +{ + struct docg4_priv *doc = nand->priv; + void __iomem *docptr = CONFIG_SYS_NAND_BASE; + uint16_t status, edc_err, *buf16; + + writew(DOC_ECCCONF0_READ_MODE | + DOC_ECCCONF0_ECC_ENABLE | + DOC_ECCCONF0_UNKNOWN | + DOCG4_BCH_SIZE, + docptr + DOC_ECCCONF0); + write_nop(docptr); + write_nop(docptr); + write_nop(docptr); + write_nop(docptr); + write_nop(docptr); + + /* the 1st byte from the I/O reg is a status; the rest is page data */ + status = readw(docptr + DOC_IOSPACE_DATA); + if (status & DOCG4_READ_ERROR) { + printf("docg4_read_page: bad status: 0x%02x\n", status); + writew(0, docptr + DOC_DATAEND); + return -EIO; + } + + docg4_read_buf(mtd, buf, DOCG4_PAGE_SIZE); /* read the page data */ + + /* first 14 oob bytes read from I/O reg */ + docg4_read_buf(mtd, nand->oob_poi, 14); + + /* last 2 read from another reg */ + buf16 = (uint16_t *)(nand->oob_poi + 14); + *buf16 = readw(docptr + DOCG4_MYSTERY_REG); + + /* + * Diskonchips read oob immediately after a page read. Mtd + * infrastructure issues a separate command for reading oob after the + * page is read. So we save the oob bytes in a local buffer and just + * copy it if the next command reads oob from the same page. + */ + memcpy(doc->oob_buf, nand->oob_poi, 16); + + write_nop(docptr); + + if (likely(use_ecc)) { + /* read the register that tells us if bitflip(s) detected */ + edc_err = readw(docptr + DOC_ECCCONF1); + edc_err = readw(docptr + DOC_ECCCONF1); + + /* If bitflips are reported, attempt to correct with ecc */ + if (edc_err & DOC_ECCCONF1_BCH_SYNDROM_ERR) { + int bits_corrected = correct_data(mtd, buf, page); + if (bits_corrected == -EBADMSG) + mtd->ecc_stats.failed++; + else + mtd->ecc_stats.corrected += bits_corrected; + } + } + + writew(0, docptr + DOC_DATAEND); + return 0; +} + + +static int docg4_read_page_raw(struct mtd_info *mtd, struct nand_chip *nand, + uint8_t *buf, int page) +{ + return read_page(mtd, nand, buf, page, 0); +} + +static int docg4_read_page(struct mtd_info *mtd, struct nand_chip *nand, + uint8_t *buf, int page) +{ + return read_page(mtd, nand, buf, page, 1); +} + +static void docg4_erase_block(struct mtd_info *mtd, int page) +{ + struct nand_chip *nand = mtd->priv; + struct docg4_priv *doc = nand->priv; + void __iomem *docptr = CONFIG_SYS_NAND_BASE; + uint16_t g4_page; + + MTDDEBUG(MTD_DEBUG_LEVEL3, "%s: page %04x\n", __func__, page); + + sequence_reset(docptr); + + writew(DOCG4_SEQ_BLOCKERASE, docptr + DOC_FLASHSEQUENCE); + writew(DOC_CMD_PROG_BLOCK_ADDR, docptr + DOC_FLASHCOMMAND); + write_nop(docptr); + + /* only 2 bytes of address are written to specify erase block */ + g4_page = (uint16_t)(page / 4); /* to g4's 2k page addressing */ + writeb(g4_page & 0xff, docptr + DOC_FLASHADDRESS); + g4_page >>= 8; + writeb(g4_page & 0xff, docptr + DOC_FLASHADDRESS); + write_nop(docptr); + + /* start the erasure */ + writew(DOC_CMD_ERASECYCLE2, docptr + DOC_FLASHCOMMAND); + write_nop(docptr); + write_nop(docptr); + + poll_status(docptr); + writew(DOCG4_SEQ_FLUSH, docptr + DOC_FLASHSEQUENCE); + writew(DOCG4_CMD_FLUSH, docptr + DOC_FLASHCOMMAND); + writew(DOC_ECCCONF0_READ_MODE | 4, docptr + DOC_ECCCONF0); + write_nop(docptr); + write_nop(docptr); + write_nop(docptr); + write_nop(docptr); + write_nop(docptr); + + read_progstatus(doc, docptr); + + writew(0, docptr + DOC_DATAEND); + write_nop(docptr); + poll_status(docptr); + write_nop(docptr); +} + +static int read_factory_bbt(struct mtd_info *mtd) +{ + /* + * The device contains a read-only factory bad block table. Read it and + * update the memory-based bbt accordingly. + */ + + struct nand_chip *nand = mtd->priv; + uint32_t g4_addr = mtd_to_docg4_address(DOCG4_FACTORY_BBT_PAGE, 0); + uint8_t *buf; + int i, block, status; + + buf = kzalloc(DOCG4_PAGE_SIZE, GFP_KERNEL); + if (buf == NULL) + return -ENOMEM; + + read_page_prologue(CONFIG_SYS_NAND_BASE, g4_addr); + status = docg4_read_page(mtd, nand, buf, DOCG4_FACTORY_BBT_PAGE); + if (status) + goto exit; + + /* + * If no memory-based bbt was created, exit. This will happen if module + * parameter ignore_badblocks is set. Then why even call this function? + * For an unknown reason, block erase always fails if it's the first + * operation after device power-up. The above read ensures it never is. + * Ugly, I know. + */ + if (nand->bbt == NULL) /* no memory-based bbt */ + goto exit; + + /* + * Parse factory bbt and update memory-based bbt. Factory bbt format is + * simple: one bit per block, block numbers increase left to right (msb + * to lsb). Bit clear means bad block. + */ + for (i = block = 0; block < DOCG4_NUMBLOCKS; block += 8, i++) { + int bitnum; + uint8_t mask; + for (bitnum = 0, mask = 0x80; + bitnum < 8; bitnum++, mask >>= 1) { + if (!(buf[i] & mask)) { + int badblock = block + bitnum; + nand->bbt[badblock / 4] |= + 0x03 << ((badblock % 4) * 2); + mtd->ecc_stats.badblocks++; + printf("factory-marked bad block: %d\n", + badblock); + } + } + } + exit: + kfree(buf); + return status; +} + +static int docg4_block_markbad(struct mtd_info *mtd, loff_t ofs) +{ + /* + * Mark a block as bad. Bad blocks are marked in the oob area of the + * first page of the block. The default scan_bbt() in the nand + * infrastructure code works fine for building the memory-based bbt + * during initialization, as does the nand infrastructure function that + * checks if a block is bad by reading the bbt. This function replaces + * the nand default because writes to oob-only are not supported. + */ + + int ret, i; + uint8_t *buf; + struct nand_chip *nand = mtd->priv; + struct nand_bbt_descr *bbtd = nand->badblock_pattern; + int block = (int)(ofs >> nand->bbt_erase_shift); + int page = (int)(ofs >> nand->page_shift); + uint32_t g4_addr = mtd_to_docg4_address(page, 0); + + MTDDEBUG(MTD_DEBUG_LEVEL3, "%s: %08llx\n", __func__, ofs); + + if (unlikely(ofs & (DOCG4_BLOCK_SIZE - 1))) + printf("%s: ofs %llx not start of block!\n", + __func__, ofs); + + /* allocate blank buffer for page data */ + buf = kzalloc(DOCG4_PAGE_SIZE, GFP_KERNEL); + if (buf == NULL) + return -ENOMEM; + + /* update bbt in memory */ + nand->bbt[block / 4] |= 0x01 << ((block & 0x03) * 2); + + /* write bit-wise negation of pattern to oob buffer */ + memset(nand->oob_poi, 0xff, mtd->oobsize); + for (i = 0; i < bbtd->len; i++) + nand->oob_poi[bbtd->offs + i] = ~bbtd->pattern[i]; + + /* write first page of block */ + write_page_prologue(CONFIG_SYS_NAND_BASE, g4_addr); + docg4_write_page(mtd, nand, buf); + ret = pageprog(mtd); + if (!ret) + mtd->ecc_stats.badblocks++; + + kfree(buf); + + return ret; +} + +static uint8_t docg4_read_byte(struct mtd_info *mtd) +{ + struct nand_chip *nand = mtd->priv; + struct docg4_priv *doc = nand->priv; + + MTDDEBUG(MTD_DEBUG_LEVEL3, "%s\n", __func__); + + if (doc->last_command.command == NAND_CMD_STATUS) { + int status; + + /* + * Previous nand command was status request, so nand + * infrastructure code expects to read the status here. If an + * error occurred in a previous operation, report it. + */ + doc->last_command.command = 0; + + if (doc->status) { + status = doc->status; + doc->status = 0; + } + + /* why is NAND_STATUS_WP inverse logic?? */ + else + status = NAND_STATUS_WP | NAND_STATUS_READY; + + return status; + } + + printf("unexpectd call to read_byte()\n"); + + return 0; +} + +static int docg4_wait(struct mtd_info *mtd, struct nand_chip *nand) +{ + struct docg4_priv *doc = nand->priv; + int status = NAND_STATUS_WP; /* inverse logic?? */ + MTDDEBUG(MTD_DEBUG_LEVEL3, "%s...\n", __func__); + + /* report any previously unreported error */ + if (doc->status) { + status |= doc->status; + doc->status = 0; + return status; + } + + status |= poll_status(CONFIG_SYS_NAND_BASE); + return status; +} + +int docg4_nand_init(struct mtd_info *mtd, struct nand_chip *nand, int devnum) +{ + uint16_t id1, id2; + struct docg4_priv *docg4; + int retval; + + docg4 = kzalloc(sizeof(*docg4), GFP_KERNEL); + if (!docg4) + return -1; + + mtd->priv = nand; + nand->priv = docg4; + + /* These must be initialized here because the docg4 is non-standard + * and doesn't produce an id that the nand code can use to look up + * these values (nand_scan_ident() not called). + */ + mtd->size = DOCG4_CHIP_SIZE; + mtd->name = "Msys_Diskonchip_G4"; + mtd->writesize = DOCG4_PAGE_SIZE; + mtd->erasesize = DOCG4_BLOCK_SIZE; + mtd->oobsize = DOCG4_OOB_SIZE; + + nand->IO_ADDR_R = + (void __iomem *)CONFIG_SYS_NAND_BASE + DOC_IOSPACE_DATA; + nand->IO_ADDR_W = nand->IO_ADDR_R; + nand->chipsize = DOCG4_CHIP_SIZE; + nand->chip_shift = DOCG4_CHIP_SHIFT; + nand->bbt_erase_shift = DOCG4_ERASE_SHIFT; + nand->phys_erase_shift = DOCG4_ERASE_SHIFT; + nand->chip_delay = 20; + nand->page_shift = DOCG4_PAGE_SHIFT; + nand->pagemask = 0x3ffff; + nand->badblockpos = NAND_LARGE_BADBLOCK_POS; + nand->badblockbits = 8; + nand->ecc.layout = &docg4_oobinfo; + nand->ecc.mode = NAND_ECC_HW_SYNDROME; + nand->ecc.size = DOCG4_PAGE_SIZE; + nand->ecc.prepad = 8; + nand->ecc.bytes = 8; + nand->options = + NAND_BUSWIDTH_16 | NAND_NO_SUBPAGE_WRITE | NAND_NO_AUTOINCR; + nand->controller = &nand->hwcontrol; + + /* methods */ + nand->cmdfunc = docg4_command; + nand->waitfunc = docg4_wait; + nand->select_chip = docg4_select_chip; + nand->read_byte = docg4_read_byte; + nand->block_markbad = docg4_block_markbad; + nand->read_buf = docg4_read_buf; + nand->write_buf = docg4_write_buf16; + nand->scan_bbt = nand_default_bbt; + nand->erase_cmd = docg4_erase_block; + nand->ecc.read_page = docg4_read_page; + nand->ecc.write_page = docg4_write_page; + nand->ecc.read_page_raw = docg4_read_page_raw; + nand->ecc.write_page_raw = docg4_write_page_raw; + nand->ecc.read_oob = docg4_read_oob; + nand->ecc.write_oob = docg4_write_oob; + + /* + * The way the nand infrastructure code is written, a memory-based bbt + * is not created if NAND_SKIP_BBTSCAN is set. With no memory bbt, + * nand->block_bad() is used. So when ignoring bad blocks, we skip the + * scan and define a dummy block_bad() which always returns 0. + */ + if (ignore_badblocks) { + nand->options |= NAND_SKIP_BBTSCAN; + nand->block_bad = docg4_block_neverbad; + } + + reset(CONFIG_SYS_NAND_BASE); + + /* check for presence of g4 chip by reading id registers */ + id1 = readw(CONFIG_SYS_NAND_BASE + DOC_CHIPID); + id1 = readw(CONFIG_SYS_NAND_BASE + DOCG4_MYSTERY_REG); + id2 = readw(CONFIG_SYS_NAND_BASE + DOC_CHIPID_INV); + id2 = readw(CONFIG_SYS_NAND_BASE + DOCG4_MYSTERY_REG); + if (id1 != DOCG4_IDREG1_VALUE || id2 != DOCG4_IDREG2_VALUE) + return -1; + + /* initialize bch algorithm */ + docg4->bch = init_bch(DOCG4_M, DOCG4_T, DOCG4_PRIMITIVE_POLY); + if (docg4->bch == NULL) + return -1; + + retval = nand_scan_tail(mtd); + if (retval) + return -1; + + /* + * Scan for bad blocks and create bbt here, then add the factory-marked + * bad blocks to the bbt. + */ + nand->scan_bbt(mtd); + nand->options |= NAND_BBT_SCANNED; + retval = read_factory_bbt(mtd); + if (retval) + return -1; + + retval = nand_register(devnum); + if (retval) + return -1; + + return 0; +} diff --git a/drivers/mtd/nand/docg4_spl.c b/drivers/mtd/nand/docg4_spl.c new file mode 100644 index 0000000..95e856c --- /dev/null +++ b/drivers/mtd/nand/docg4_spl.c @@ -0,0 +1,222 @@ +/* + * SPL driver for Diskonchip G4 nand flash + * + * Copyright (C) 2013 Mike Dunn <mikedunn@newsguy.com> + * + * This file is released under the terms of GPL v2 and any later version. + * See the file COPYING in the root directory of the source tree for details. + * + * + * This driver basically mimics the load functionality of a typical IPL (initial + * program loader) resident in the 2k NOR-like region of the docg4 that is + * mapped to the reset vector. It allows the u-boot SPL to continue loading if + * the IPL loads a fixed number of flash blocks that is insufficient to contain + * the entire u-boot image. In this case, a concatenated spl + u-boot image is + * written at the flash offset from which the IPL loads an image, and when the + * IPL jumps to the SPL, the SPL resumes loading where the IPL left off. See + * the palmtreo680 for an example. + * + * This driver assumes that the data was written to the flash using the device's + * "reliable" mode, and also assumes that each 512 byte page is stored + * redundantly in the subsequent page. This storage format is likely to be used + * by all boards that boot from the docg4. The format compensates for the lack + * of ecc in the IPL. + * + * Reliable mode reduces the capacity of a block by half, and the redundant + * pages reduce it by half again. As a result, the normal 256k capacity of a + * block is reduced to 64k for the purposes of the IPL/SPL. + */ + +#include <asm/io.h> +#include <linux/mtd/docg4.h> + +/* forward declarations */ +static inline void write_nop(void __iomem *docptr); +static int poll_status(void __iomem *docptr); +static void write_addr(void __iomem *docptr, uint32_t docg4_addr); +static void address_sequence(unsigned int g4_page, unsigned int g4_index, + void __iomem *docptr); +static int docg4_load_block_reliable(uint32_t flash_offset, void *dest_addr); + +int nand_spl_load_image(uint32_t offs, unsigned int size, void *dst) +{ + void *load_addr = dst; + uint32_t flash_offset = offs; + const unsigned int block_count = + (size + DOCG4_BLOCK_CAPACITY_SPL - 1) + / DOCG4_BLOCK_CAPACITY_SPL; + int i; + + for (i = 0; i < block_count; i++) { + int ret = docg4_load_block_reliable(flash_offset, load_addr); + if (ret) + return ret; + load_addr += DOCG4_BLOCK_CAPACITY_SPL; + flash_offset += DOCG4_BLOCK_SIZE; + } + return 0; +} + +static inline void write_nop(void __iomem *docptr) +{ + writew(0, docptr + DOC_NOP); +} + +static int poll_status(void __iomem *docptr) +{ + /* + * Busy-wait for the FLASHREADY bit to be set in the FLASHCONTROL + * register. Operations known to take a long time (e.g., block erase) + * should sleep for a while before calling this. + */ + + uint8_t flash_status; + + /* hardware quirk requires reading twice initially */ + flash_status = readb(docptr + DOC_FLASHCONTROL); + + do { + flash_status = readb(docptr + DOC_FLASHCONTROL); + } while (!(flash_status & DOC_CTRL_FLASHREADY)); + + return 0; +} + +static void write_addr(void __iomem *docptr, uint32_t docg4_addr) +{ + /* write the four address bytes packed in docg4_addr to the device */ + + writeb(docg4_addr & 0xff, docptr + DOC_FLASHADDRESS); + docg4_addr >>= 8; + writeb(docg4_addr & 0xff, docptr + DOC_FLASHADDRESS); + docg4_addr >>= 8; + writeb(docg4_addr & 0xff, docptr + DOC_FLASHADDRESS); + docg4_addr >>= 8; + writeb(docg4_addr & 0xff, docptr + DOC_FLASHADDRESS); +} + +static void address_sequence(unsigned int g4_page, unsigned int g4_index, + void __iomem *docptr) +{ + writew(DOCG4_SEQ_PAGE_READ, docptr + DOC_FLASHSEQUENCE); + writew(DOCG4_CMD_PAGE_READ, docptr + DOC_FLASHCOMMAND); + write_nop(docptr); + write_addr(docptr, ((uint32_t)g4_page << 16) | g4_index); + write_nop(docptr); +} + +static int docg4_load_block_reliable(uint32_t flash_offset, void *dest_addr) +{ + void __iomem *docptr = (void *)CONFIG_SYS_NAND_BASE; + unsigned int g4_page = flash_offset >> 11; /* 2k page */ + const unsigned int last_g4_page = g4_page + 0x80; /* last in block */ + int g4_index = 0; + uint16_t flash_status; + uint16_t *buf; + uint16_t discard, magic_high, magic_low; + + /* flash_offset must be aligned to the start of a block */ + if (flash_offset & 0x3ffff) + return -1; + + writew(DOC_SEQ_RESET, docptr + DOC_FLASHSEQUENCE); + writew(DOC_CMD_RESET, docptr + DOC_FLASHCOMMAND); + write_nop(docptr); + write_nop(docptr); + poll_status(docptr); + write_nop(docptr); + writew(0x45, docptr + DOC_FLASHSEQUENCE); + writew(0xa3, docptr + DOC_FLASHCOMMAND); + write_nop(docptr); + writew(0x22, docptr + DOC_FLASHCOMMAND); + write_nop(docptr); + + /* read 1st 4 oob bytes of first subpage of block */ + address_sequence(g4_page, 0x0100, docptr); /* index at oob */ + write_nop(docptr); + flash_status = readw(docptr + DOC_FLASHCONTROL); + flash_status = readw(docptr + DOC_FLASHCONTROL); + if (flash_status & 0x06) /* sequence or protection errors */ + return -1; + writew(DOCG4_CMD_READ2, docptr + DOC_FLASHCOMMAND); + write_nop(docptr); + write_nop(docptr); + poll_status(docptr); + writew(DOC_ECCCONF0_READ_MODE | 4, docptr + DOC_ECCCONF0); + write_nop(docptr); + write_nop(docptr); + write_nop(docptr); + write_nop(docptr); + write_nop(docptr); + + /* + * Here we read the first four oob bytes of the first page of the block. + * The IPL on the palmtreo680 requires that this contain a 32 bit magic + * number, or the load aborts. We'll ignore it. + */ + discard = readw(docptr + 0x103c); /* hw quirk; 1st read discarded */ + magic_low = readw(docptr + 0x103c); + magic_high = readw(docptr + DOCG4_MYSTERY_REG); + writew(0, docptr + DOC_DATAEND); + write_nop(docptr); + write_nop(docptr); + + /* load contents of block to memory */ + buf = (uint16_t *)dest_addr; + do { + int i; + + address_sequence(g4_page, g4_index, docptr); + writew(DOCG4_CMD_READ2, + docptr + DOC_FLASHCOMMAND); + write_nop(docptr); + write_nop(docptr); + poll_status(docptr); + writew(DOC_ECCCONF0_READ_MODE | + DOC_ECCCONF0_ECC_ENABLE | + DOCG4_BCH_SIZE, + docptr + DOC_ECCCONF0); + write_nop(docptr); + write_nop(docptr); + write_nop(docptr); + write_nop(docptr); + write_nop(docptr); + + /* read the 512 bytes of page data, 2 bytes at a time */ + discard = readw(docptr + 0x103c); + for (i = 0; i < 256; i++) + *buf++ = readw(docptr + 0x103c); + + /* read oob, but discard it */ + for (i = 0; i < 7; i++) + discard = readw(docptr + 0x103c); + discard = readw(docptr + DOCG4_OOB_6_7); + discard = readw(docptr + DOCG4_OOB_6_7); + + writew(0, docptr + DOC_DATAEND); + write_nop(docptr); + write_nop(docptr); + + if (!(g4_index & 0x100)) { + /* not redundant subpage read; check for ecc error */ + write_nop(docptr); + flash_status = readw(docptr + DOC_ECCCONF1); + flash_status = readw(docptr + DOC_ECCCONF1); + if (flash_status & 0x80) { /* ecc error */ + g4_index += 0x108; /* read redundant subpage */ + buf -= 256; /* back up ram ptr */ + continue; + } else /* no ecc error */ + g4_index += 0x210; /* skip redundant subpage */ + } else /* redundant page was just read; skip ecc error check */ + g4_index += 0x108; + + if (g4_index == 0x420) { /* finished with 2k page */ + g4_index = 0; + g4_page += 2; /* odd-numbered 2k pages skipped */ + } + + } while (g4_page != last_g4_page); /* while still on same block */ + + return 0; +} diff --git a/drivers/mtd/nand/mxc_nand_spl.c b/drivers/mtd/nand/mxc_nand_spl.c index edc589e..ba725e9 100644 --- a/drivers/mtd/nand/mxc_nand_spl.c +++ b/drivers/mtd/nand/mxc_nand_spl.c @@ -290,7 +290,7 @@ static int is_badblock(int pagenumber) return 0; } -static int nand_load(unsigned int from, unsigned int size, unsigned char *buf) +int nand_spl_load_image(uint32_t from, unsigned int size, void *buf) { int i; unsigned int page; @@ -303,6 +303,7 @@ static int nand_load(unsigned int from, unsigned int size, unsigned char *buf) page = from / CONFIG_SYS_NAND_PAGE_SIZE; i = 0; + size = roundup(size, CONFIG_SYS_NAND_PAGE_SIZE); while (i < size / CONFIG_SYS_NAND_PAGE_SIZE) { if (nfc_read_page(page, buf) < 0) return -1; @@ -332,6 +333,7 @@ static int nand_load(unsigned int from, unsigned int size, unsigned char *buf) return 0; } +#ifndef CONFIG_SPL_FRAMEWORK /* * The main entry for NAND booting. It's necessary that SDRAM is already * configured and available since this code loads the main U-Boot image @@ -345,8 +347,9 @@ void nand_boot(void) * CONFIG_SYS_NAND_U_BOOT_OFFS and CONFIG_SYS_NAND_U_BOOT_SIZE must * be aligned to full pages */ - if (!nand_load(CONFIG_SYS_NAND_U_BOOT_OFFS, CONFIG_SYS_NAND_U_BOOT_SIZE, - (uchar *)CONFIG_SYS_NAND_U_BOOT_DST)) { + if (!nand_spl_load_image(CONFIG_SYS_NAND_U_BOOT_OFFS, + CONFIG_SYS_NAND_U_BOOT_SIZE, + (uchar *)CONFIG_SYS_NAND_U_BOOT_DST)) { /* Copy from NAND successful, start U-boot */ uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START; uboot(); @@ -355,3 +358,7 @@ void nand_boot(void) hang(); } } +#endif + +void nand_init(void) {} +void nand_deselect(void) {} diff --git a/drivers/mtd/nand/mxs_nand.c b/drivers/mtd/nand/mxs_nand.c index e38e151..398e4dd 100644 --- a/drivers/mtd/nand/mxs_nand.c +++ b/drivers/mtd/nand/mxs_nand.c @@ -34,12 +34,19 @@ #include <asm/io.h> #include <asm/arch/clock.h> #include <asm/arch/imx-regs.h> +#include <asm/imx-common/regs-bch.h> +#include <asm/imx-common/regs-gpmi.h> #include <asm/arch/sys_proto.h> -#include <asm/arch/dma.h> +#include <asm/imx-common/dma.h> #define MXS_NAND_DMA_DESCRIPTOR_COUNT 4 #define MXS_NAND_CHUNK_DATA_CHUNK_SIZE 512 +#if defined(CONFIG_MX6) +#define MXS_NAND_CHUNK_DATA_CHUNK_SIZE_SHIFT 2 +#else +#define MXS_NAND_CHUNK_DATA_CHUNK_SIZE_SHIFT 0 +#endif #define MXS_NAND_METADATA_SIZE 10 #define MXS_NAND_COMMAND_BUFFER_SIZE 32 @@ -980,14 +987,16 @@ static int mxs_nand_scan_bbt(struct mtd_info *mtd) tmp |= MXS_NAND_METADATA_SIZE << BCH_FLASHLAYOUT0_META_SIZE_OFFSET; tmp |= (mxs_nand_get_ecc_strength(mtd->writesize, mtd->oobsize) >> 1) << BCH_FLASHLAYOUT0_ECC0_OFFSET; - tmp |= MXS_NAND_CHUNK_DATA_CHUNK_SIZE; + tmp |= MXS_NAND_CHUNK_DATA_CHUNK_SIZE + >> MXS_NAND_CHUNK_DATA_CHUNK_SIZE_SHIFT; writel(tmp, &bch_regs->hw_bch_flash0layout0); tmp = (mtd->writesize + mtd->oobsize) << BCH_FLASHLAYOUT1_PAGE_SIZE_OFFSET; tmp |= (mxs_nand_get_ecc_strength(mtd->writesize, mtd->oobsize) >> 1) << BCH_FLASHLAYOUT1_ECCN_OFFSET; - tmp |= MXS_NAND_CHUNK_DATA_CHUNK_SIZE; + tmp |= MXS_NAND_CHUNK_DATA_CHUNK_SIZE + >> MXS_NAND_CHUNK_DATA_CHUNK_SIZE_SHIFT; writel(tmp, &bch_regs->hw_bch_flash0layout1); /* Set *all* chip selects to use layout 0 */ diff --git a/drivers/net/cpsw.c b/drivers/net/cpsw.c index 7a36850..379b679 100644 --- a/drivers/net/cpsw.c +++ b/drivers/net/cpsw.c @@ -109,7 +109,13 @@ struct cpsw_slave_regs { u32 flow_thresh; u32 port_vlan; u32 tx_pri_map; +#ifdef CONFIG_AM33XX u32 gap_thresh; +#elif defined(CONFIG_TI814X) + u32 ts_ctl; + u32 ts_seq_ltype; + u32 ts_vlan; +#endif u32 sa_lo; u32 sa_hi; }; diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index 5e90d70..af5f4b8 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -34,6 +34,7 @@ COBJS-$(CONFIG_PHYLIB_10G) += generic_10g.o COBJS-$(CONFIG_PHY_ATHEROS) += atheros.o COBJS-$(CONFIG_PHY_BROADCOM) += broadcom.o COBJS-$(CONFIG_PHY_DAVICOM) += davicom.o +COBJS-$(CONFIG_PHY_ET1011C) += et1011c.o COBJS-$(CONFIG_PHY_LXT) += lxt.o COBJS-$(CONFIG_PHY_MARVELL) += marvell.o COBJS-$(CONFIG_PHY_MICREL) += micrel.o diff --git a/drivers/net/phy/et1011c.c b/drivers/net/phy/et1011c.c new file mode 100644 index 0000000..5e22399 --- /dev/null +++ b/drivers/net/phy/et1011c.c @@ -0,0 +1,110 @@ +/* + * ET1011C PHY driver + * + * Derived from Linux kernel driver by Chaithrika U S + * Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ +#include <config.h> +#include <phy.h> + +#define ET1011C_CONFIG_REG (0x16) +#define ET1011C_TX_FIFO_MASK (0x3 << 12) +#define ET1011C_TX_FIFO_DEPTH_8 (0x0 << 12) +#define ET1011C_TX_FIFO_DEPTH_16 (0x1 << 12) +#define ET1011C_INTERFACE_MASK (0x7 << 0) +#define ET1011C_GMII_INTERFACE (0x2 << 0) +#define ET1011C_SYS_CLK_EN (0x1 << 4) +#define ET1011C_TX_CLK_EN (0x1 << 5) + +#define ET1011C_STATUS_REG (0x1A) +#define ET1011C_DUPLEX_STATUS (0x1 << 7) +#define ET1011C_SPEED_MASK (0x3 << 8) +#define ET1011C_SPEED_1000 (0x2 << 8) +#define ET1011C_SPEED_100 (0x1 << 8) +#define ET1011C_SPEED_10 (0x0 << 8) + +static int et1011c_config(struct phy_device *phydev) +{ + int ctl = 0; + ctl = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR); + if (ctl < 0) + return ctl; + ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 | + BMCR_ANENABLE); + /* First clear the PHY */ + phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, ctl | BMCR_RESET); + + return genphy_config_aneg(phydev); +} + +static int et1011c_parse_status(struct phy_device *phydev) +{ + int mii_reg; + int speed; + + mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, ET1011C_STATUS_REG); + + if (mii_reg & ET1011C_DUPLEX_STATUS) + phydev->duplex = DUPLEX_FULL; + else + phydev->duplex = DUPLEX_HALF; + + speed = mii_reg & ET1011C_SPEED_MASK; + switch (speed) { + case ET1011C_SPEED_1000: + phydev->speed = SPEED_1000; + mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, ET1011C_CONFIG_REG); + mii_reg &= ~ET1011C_TX_FIFO_MASK; + phy_write(phydev, MDIO_DEVAD_NONE, ET1011C_CONFIG_REG, + mii_reg | + ET1011C_GMII_INTERFACE | + ET1011C_SYS_CLK_EN | +#ifdef CONFIG_PHY_ET1011C_TX_CLK_FIX + ET1011C_TX_CLK_EN | +#endif + ET1011C_TX_FIFO_DEPTH_16); + break; + case ET1011C_SPEED_100: + phydev->speed = SPEED_100; + break; + case ET1011C_SPEED_10: + phydev->speed = SPEED_10; + break; + } + + return 0; +} + +static int et1011c_startup(struct phy_device *phydev) +{ + genphy_update_link(phydev); + et1011c_parse_status(phydev); + return 0; +} + +static struct phy_driver et1011c_driver = { + .name = "ET1011C", + .uid = 0x0282f014, + .mask = 0xfffffff0, + .features = PHY_GBIT_FEATURES, + .config = &et1011c_config, + .startup = &et1011c_startup, +}; + +int phy_et1011c_init(void) +{ + phy_register(&et1011c_driver); + + return 0; +} diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index 4b27198..46801c7 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -465,6 +465,16 @@ static struct phy_driver M88E1149S_driver = { .shutdown = &genphy_shutdown, }; +static struct phy_driver M88E1518_driver = { + .name = "Marvell 88E1518", + .uid = 0x1410dd1, + .mask = 0xffffff0, + .features = PHY_GBIT_FEATURES, + .config = &m88e1111s_config, + .startup = &m88e1011s_startup, + .shutdown = &genphy_shutdown, +}; + int phy_marvell_init(void) { phy_register(&M88E1149S_driver); @@ -474,6 +484,7 @@ int phy_marvell_init(void) phy_register(&M88E1118R_driver); phy_register(&M88E1111S_driver); phy_register(&M88E1011S_driver); + phy_register(&M88E1518_driver); return 0; } diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index d0ed766..f8c5481 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -430,6 +430,9 @@ int phy_init(void) #ifdef CONFIG_PHY_DAVICOM phy_davicom_init(); #endif +#ifdef CONFIG_PHY_ET1011C + phy_et1011c_init(); +#endif #ifdef CONFIG_PHY_LXT phy_lxt_init(); #endif diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c index 3596065..eac9b6f 100644 --- a/drivers/net/zynq_gem.c +++ b/drivers/net/zynq_gem.c @@ -33,6 +33,8 @@ #include <phy.h> #include <miiphy.h> #include <watchdog.h> +#include <asm/arch/hardware.h> +#include <asm/arch/sys_proto.h> #if !defined(CONFIG_PHYLIB) # error XILINX_GEM_ETHERNET requires PHYLIB @@ -67,13 +69,14 @@ #define ZYNQ_GEM_NWCTRL_MDEN_MASK 0x00000010 /* Enable MDIO port */ #define ZYNQ_GEM_NWCTRL_STARTTX_MASK 0x00000200 /* Start tx (tx_go) */ -#define ZYNQ_GEM_NWCFG_SPEED 0x00000001 /* 100 Mbps operation */ -#define ZYNQ_GEM_NWCFG_FDEN 0x00000002 /* Full Duplex mode */ -#define ZYNQ_GEM_NWCFG_FSREM 0x00020000 /* FCS removal */ +#define ZYNQ_GEM_NWCFG_SPEED100 0x000000001 /* 100 Mbps operation */ +#define ZYNQ_GEM_NWCFG_SPEED1000 0x000000400 /* 1Gbps operation */ +#define ZYNQ_GEM_NWCFG_FDEN 0x000000002 /* Full Duplex mode */ +#define ZYNQ_GEM_NWCFG_FSREM 0x000020000 /* FCS removal */ #define ZYNQ_GEM_NWCFG_MDCCLKDIV 0x000080000 /* Div pclk by 32, 80MHz */ +#define ZYNQ_GEM_NWCFG_MDCCLKDIV2 0x0000c0000 /* Div pclk by 48, 120MHz */ -#define ZYNQ_GEM_NWCFG_INIT (ZYNQ_GEM_NWCFG_SPEED | \ - ZYNQ_GEM_NWCFG_FDEN | \ +#define ZYNQ_GEM_NWCFG_INIT (ZYNQ_GEM_NWCFG_FDEN | \ ZYNQ_GEM_NWCFG_FSREM | \ ZYNQ_GEM_NWCFG_MDCCLKDIV) @@ -92,6 +95,17 @@ ZYNQ_GEM_DMACR_TXSIZE | \ ZYNQ_GEM_DMACR_RXBUF) +/* Use MII register 1 (MII status register) to detect PHY */ +#define PHY_DETECT_REG 1 + +/* Mask used to verify certain PHY features (or register contents) + * in the register above: + * 0x1000: 10Mbps full duplex support + * 0x0800: 10Mbps half duplex support + * 0x0008: Auto-negotiation support + */ +#define PHY_DETECT_MASK 0x1808 + /* Device registers */ struct zynq_gem_regs { u32 nwctrl; /* Network Control reg */ @@ -134,6 +148,8 @@ struct zynq_gem_priv { u32 rxbd_current; u32 rx_first_buf; int phyaddr; + u32 emio; + int init; struct phy_device *phydev; struct mii_dev *bus; }; @@ -196,6 +212,44 @@ static u32 phywrite(struct eth_device *dev, u32 phy_addr, u32 regnum, u16 data) ZYNQ_GEM_PHYMNTNC_OP_W_MASK, &data); } +static void phy_detection(struct eth_device *dev) +{ + int i; + u16 phyreg; + struct zynq_gem_priv *priv = dev->priv; + + if (priv->phyaddr != -1) { + phyread(dev, priv->phyaddr, PHY_DETECT_REG, &phyreg); + if ((phyreg != 0xFFFF) && + ((phyreg & PHY_DETECT_MASK) == PHY_DETECT_MASK)) { + /* Found a valid PHY address */ + debug("Default phy address %d is valid\n", + priv->phyaddr); + return; + } else { + debug("PHY address is not setup correctly %d\n", + priv->phyaddr); + priv->phyaddr = -1; + } + } + + debug("detecting phy address\n"); + if (priv->phyaddr == -1) { + /* detect the PHY address */ + for (i = 31; i >= 0; i--) { + phyread(dev, i, PHY_DETECT_REG, &phyreg); + if ((phyreg != 0xFFFF) && + ((phyreg & PHY_DETECT_MASK) == PHY_DETECT_MASK)) { + /* Found a valid PHY address */ + priv->phyaddr = i; + debug("Found valid phy address, %d\n", i); + return; + } + } + } + printf("PHY is not detected\n"); +} + static int zynq_gem_setup_mac(struct eth_device *dev) { u32 i, macaddrlow, macaddrhigh; @@ -226,7 +280,7 @@ static int zynq_gem_setup_mac(struct eth_device *dev) static int zynq_gem_init(struct eth_device *dev, bd_t * bis) { - u32 i; + u32 i, rclk, clk = 0; struct phy_device *phydev; const u32 stat_size = (sizeof(struct zynq_gem_regs) - offsetof(struct zynq_gem_regs, stat)) / 4; @@ -239,59 +293,92 @@ static int zynq_gem_init(struct eth_device *dev, bd_t * bis) SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full; - /* Disable all interrupts */ - writel(0xFFFFFFFF, ®s->idr); - - /* Disable the receiver & transmitter */ - writel(0, ®s->nwctrl); - writel(0, ®s->txsr); - writel(0, ®s->rxsr); - writel(0, ®s->phymntnc); - - /* Clear the Hash registers for the mac address pointed by AddressPtr */ - writel(0x0, ®s->hashl); - /* Write bits [63:32] in TOP */ - writel(0x0, ®s->hashh); + if (!priv->init) { + /* Disable all interrupts */ + writel(0xFFFFFFFF, ®s->idr); + + /* Disable the receiver & transmitter */ + writel(0, ®s->nwctrl); + writel(0, ®s->txsr); + writel(0, ®s->rxsr); + writel(0, ®s->phymntnc); + + /* Clear the Hash registers for the mac address + * pointed by AddressPtr + */ + writel(0x0, ®s->hashl); + /* Write bits [63:32] in TOP */ + writel(0x0, ®s->hashh); + + /* Clear all counters */ + for (i = 0; i <= stat_size; i++) + readl(®s->stat[i]); + + /* Setup RxBD space */ + memset(&(priv->rx_bd), 0, sizeof(priv->rx_bd)); + /* Create the RxBD ring */ + memset(&(priv->rxbuffers), 0, sizeof(priv->rxbuffers)); + + for (i = 0; i < RX_BUF; i++) { + priv->rx_bd[i].status = 0xF0000000; + priv->rx_bd[i].addr = + (u32)((char *)&(priv->rxbuffers) + + (i * PKTSIZE_ALIGN)); + } + /* WRAP bit to last BD */ + priv->rx_bd[--i].addr |= ZYNQ_GEM_RXBUF_WRAP_MASK; + /* Write RxBDs to IP */ + writel((u32)&(priv->rx_bd), ®s->rxqbase); - /* Clear all counters */ - for (i = 0; i <= stat_size; i++) - readl(®s->stat[i]); + /* Setup for DMA Configuration register */ + writel(ZYNQ_GEM_DMACR_INIT, ®s->dmacr); - /* Setup RxBD space */ - memset(&(priv->rx_bd), 0, sizeof(priv->rx_bd)); - /* Create the RxBD ring */ - memset(&(priv->rxbuffers), 0, sizeof(priv->rxbuffers)); + /* Setup for Network Control register, MDIO, Rx and Tx enable */ + setbits_le32(®s->nwctrl, ZYNQ_GEM_NWCTRL_MDEN_MASK); - for (i = 0; i < RX_BUF; i++) { - priv->rx_bd[i].status = 0xF0000000; - priv->rx_bd[i].addr = (u32)((char *) &(priv->rxbuffers) + - (i * PKTSIZE_ALIGN)); + priv->init++; } - /* WRAP bit to last BD */ - priv->rx_bd[--i].addr |= ZYNQ_GEM_RXBUF_WRAP_MASK; - /* Write RxBDs to IP */ - writel((u32) &(priv->rx_bd), ®s->rxqbase); - /* MAC Setup */ - /* Setup Network Configuration register */ - writel(ZYNQ_GEM_NWCFG_INIT, ®s->nwcfg); - - /* Setup for DMA Configuration register */ - writel(ZYNQ_GEM_DMACR_INIT, ®s->dmacr); - - /* Setup for Network Control register, MDIO, Rx and Tx enable */ - setbits_le32(®s->nwctrl, ZYNQ_GEM_NWCTRL_MDEN_MASK | - ZYNQ_GEM_NWCTRL_RXEN_MASK | ZYNQ_GEM_NWCTRL_TXEN_MASK); + phy_detection(dev); /* interface - look at tsec */ phydev = phy_connect(priv->bus, priv->phyaddr, dev, 0); - phydev->supported &= supported; + phydev->supported = supported | ADVERTISED_Pause | + ADVERTISED_Asym_Pause; phydev->advertising = phydev->supported; priv->phydev = phydev; phy_config(phydev); phy_startup(phydev); + switch (phydev->speed) { + case SPEED_1000: + writel(ZYNQ_GEM_NWCFG_INIT | ZYNQ_GEM_NWCFG_SPEED1000, + ®s->nwcfg); + rclk = (0 << 4) | (1 << 0); + clk = (1 << 20) | (8 << 8) | (0 << 4) | (1 << 0); + break; + case SPEED_100: + clrsetbits_le32(®s->nwcfg, ZYNQ_GEM_NWCFG_SPEED1000, + ZYNQ_GEM_NWCFG_INIT | ZYNQ_GEM_NWCFG_SPEED100); + rclk = 1 << 0; + clk = (5 << 20) | (8 << 8) | (0 << 4) | (1 << 0); + break; + case SPEED_10: + rclk = 1 << 0; + /* FIXME untested */ + clk = (5 << 20) | (8 << 8) | (0 << 4) | (1 << 0); + break; + } + + /* Change the rclk and clk only not using EMIO interface */ + if (!priv->emio) + zynq_slcr_gem_clk_setup(dev->iobase != + ZYNQ_GEM_BASEADDR0, rclk, clk); + + setbits_le32(®s->nwctrl, ZYNQ_GEM_NWCTRL_RXEN_MASK | + ZYNQ_GEM_NWCTRL_TXEN_MASK); + return 0; } @@ -307,11 +394,10 @@ static int zynq_gem_send(struct eth_device *dev, void *ptr, int len) writel((u32)&(priv->tx_bd), ®s->txqbase); /* Setup Tx BD */ - memset((void *) &(priv->tx_bd), 0, sizeof(struct emac_bd)); + memset((void *)&(priv->tx_bd), 0, sizeof(struct emac_bd)); priv->tx_bd.addr = (u32)ptr; - priv->tx_bd.status = len | ZYNQ_GEM_TXBUF_LAST_MASK | - ZYNQ_GEM_TXBUF_WRAP_MASK; + priv->tx_bd.status = len | ZYNQ_GEM_TXBUF_LAST_MASK; /* Start transmit */ setbits_le32(®s->nwctrl, ZYNQ_GEM_NWCTRL_STARTTX_MASK); @@ -364,19 +450,17 @@ static int zynq_gem_recv(struct eth_device *dev) if ((++priv->rxbd_current) >= RX_BUF) priv->rxbd_current = 0; - - return frame_len; } - return 0; + return frame_len; } static void zynq_gem_halt(struct eth_device *dev) { struct zynq_gem_regs *regs = (struct zynq_gem_regs *)dev->iobase; - /* Disable the receiver & transmitter */ - writel(0, ®s->nwctrl); + clrsetbits_le32(®s->nwctrl, ZYNQ_GEM_NWCTRL_RXEN_MASK | + ZYNQ_GEM_NWCTRL_TXEN_MASK, 0); } static int zynq_gem_miiphyread(const char *devname, uchar addr, @@ -399,7 +483,7 @@ static int zynq_gem_miiphy_write(const char *devname, uchar addr, return phywrite(dev, addr, reg, val); } -int zynq_gem_initialize(bd_t *bis, int base_addr) +int zynq_gem_initialize(bd_t *bis, int base_addr, int phy_addr, u32 emio) { struct eth_device *dev; struct zynq_gem_priv *priv; @@ -415,11 +499,8 @@ int zynq_gem_initialize(bd_t *bis, int base_addr) } priv = dev->priv; -#ifdef CONFIG_PHY_ADDR - priv->phyaddr = CONFIG_PHY_ADDR; -#else - priv->phyaddr = -1; -#endif + priv->phyaddr = phy_addr; + priv->emio = emio; sprintf(dev->name, "Gem.%x", base_addr); diff --git a/drivers/power/Makefile b/drivers/power/Makefile index 1dac16a..a9c4237 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -30,7 +30,7 @@ COBJS-$(CONFIG_FTPMU010_POWER) += ftpmu010.o COBJS-$(CONFIG_TPS6586X_POWER) += tps6586x.o COBJS-$(CONFIG_TWL4030_POWER) += twl4030.o COBJS-$(CONFIG_TWL6030_POWER) += twl6030.o -COBJS-$(CONFIG_TWL6035_POWER) += twl6035.o +COBJS-$(CONFIG_PALMAS_POWER) += palmas.o COBJS-$(CONFIG_POWER) += power_core.o COBJS-$(CONFIG_DIALOG_POWER) += power_dialog.o diff --git a/drivers/power/twl6035.c b/drivers/power/palmas.c index d3de698..09c832d 100644 --- a/drivers/power/twl6035.c +++ b/drivers/power/palmas.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2012 + * (C) Copyright 2012-2013 * Texas Instruments, <www.ti.com> * * See file CREDITS for list of people who contributed to this @@ -21,43 +21,21 @@ * MA 02111-1307 USA */ #include <config.h> -#include <twl6035.h> +#include <palmas.h> -/* Functions to read and write from TWL6030 */ -int twl6035_i2c_write_u8(u8 chip_no, u8 val, u8 reg) -{ - return i2c_write(chip_no, reg, 1, &val, 1); -} - -int twl6035_i2c_read_u8(u8 chip_no, u8 *val, u8 reg) -{ - return i2c_read(chip_no, reg, 1, val, 1); -} - -/* To align with i2c mw/mr address, reg, val command syntax */ -static inline int palmas_write_u8(u8 chip_no, u8 reg, u8 val) -{ - return i2c_write(chip_no, reg, 1, &val, 1); -} - -static inline int palmas_read_u8(u8 chip_no, u8 reg, u8 *val) -{ - return i2c_read(chip_no, reg, 1, val, 1); -} - -void twl6035_init_settings(void) +void palmas_init_settings(void) { return; } -int twl6035_mmc1_poweron_ldo(void) +int palmas_mmc1_poweron_ldo(void) { u8 val = 0; /* set LDO9 TWL6035 to 3V */ val = 0x2b; /* (3 -.9)*28 +1 */ - if (palmas_write_u8(0x48, LDO9_VOLTAGE, val)) { + if (palmas_i2c_write_u8(0x48, LDO9_VOLTAGE, val)) { printf("twl6035: could not set LDO9 voltage.\n"); return 1; } @@ -65,7 +43,7 @@ int twl6035_mmc1_poweron_ldo(void) /* TURN ON LDO9 */ val = LDO_ON | LDO_MODE_SLEEP | LDO_MODE_ACTIVE; - if (palmas_write_u8(0x48, LDO9_CTRL, val)) { + if (palmas_i2c_write_u8(0x48, LDO9_CTRL, val)) { printf("twl6035: could not turn on LDO9.\n"); return 1; } diff --git a/drivers/power/twl4030.c b/drivers/power/twl4030.c index e7d5f13..6610f78 100644 --- a/drivers/power/twl4030.c +++ b/drivers/power/twl4030.c @@ -45,14 +45,14 @@ void twl4030_power_reset_init(void) { u8 val = 0; - if (twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER, &val, - TWL4030_PM_MASTER_P1_SW_EVENTS)) { + if (twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER, + TWL4030_PM_MASTER_P1_SW_EVENTS, &val)) { printf("Error:TWL4030: failed to read the power register\n"); printf("Could not initialize hardware reset\n"); } else { val |= TWL4030_PM_MASTER_SW_EVENTS_STOPON_PWRON; - if (twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, val, - TWL4030_PM_MASTER_P1_SW_EVENTS)) { + if (twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, + TWL4030_PM_MASTER_P1_SW_EVENTS, val)) { printf("Error:TWL4030: failed to write the power register\n"); printf("Could not initialize hardware reset\n"); } @@ -68,8 +68,8 @@ void twl4030_pmrecv_vsel_cfg(u8 vsel_reg, u8 vsel_val, int ret; /* Select the Voltage */ - ret = twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, vsel_val, - vsel_reg); + ret = twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, vsel_reg, + vsel_val); if (ret != 0) { printf("Could not write vsel to reg %02x (%d)\n", vsel_reg, ret); @@ -77,8 +77,8 @@ void twl4030_pmrecv_vsel_cfg(u8 vsel_reg, u8 vsel_val, } /* Select the Device Group (enable the supply if dev_grp_sel != 0) */ - ret = twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, dev_grp_sel, - dev_grp); + ret = twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, dev_grp, + dev_grp_sel); if (ret != 0) printf("Could not write grp_sel to reg %02x (%d)\n", dev_grp, ret); diff --git a/drivers/power/twl6030.c b/drivers/power/twl6030.c index c5a0038..d421e60 100644 --- a/drivers/power/twl6030.c +++ b/drivers/power/twl6030.c @@ -25,30 +25,19 @@ #include <twl6030.h> -/* Functions to read and write from TWL6030 */ -static inline int twl6030_i2c_write_u8(u8 chip_no, u8 val, u8 reg) -{ - return i2c_write(chip_no, reg, 1, &val, 1); -} - -static inline int twl6030_i2c_read_u8(u8 chip_no, u8 *val, u8 reg) -{ - return i2c_read(chip_no, reg, 1, val, 1); -} - static int twl6030_gpadc_read_channel(u8 channel_no) { u8 lsb = 0; u8 msb = 0; int ret = 0; - ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC, &lsb, - GPCH0_LSB + channel_no * 2); + ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC, + GPCH0_LSB + channel_no * 2, &lsb); if (ret) return ret; - ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC, &msb, - GPCH0_MSB + channel_no * 2); + ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC, + GPCH0_MSB + channel_no * 2, &msb); if (ret) return ret; @@ -60,7 +49,7 @@ static int twl6030_gpadc_sw2_trigger(void) u8 val; int ret = 0; - ret = twl6030_i2c_write_u8(TWL6030_CHIP_ADC, CTRL_P2_SP2, CTRL_P2); + ret = twl6030_i2c_write_u8(TWL6030_CHIP_ADC, CTRL_P2, CTRL_P2_SP2); if (ret) return ret; @@ -68,7 +57,7 @@ static int twl6030_gpadc_sw2_trigger(void) val = CTRL_P2_BUSY; while (!((val & CTRL_P2_EOCP2) && (!(val & CTRL_P2_BUSY)))) { - ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC, &val, CTRL_P2); + ret = twl6030_i2c_read_u8(TWL6030_CHIP_ADC, CTRL_P2, &val); if (ret) return ret; udelay(1000); @@ -79,29 +68,29 @@ static int twl6030_gpadc_sw2_trigger(void) void twl6030_stop_usb_charging(void) { - twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, 0, CONTROLLER_CTRL1); + twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CONTROLLER_CTRL1, 0); return; } void twl6030_start_usb_charging(void) { - twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CHARGERUSB_VICHRG_1500, - CHARGERUSB_VICHRG); - twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CHARGERUSB_CIN_LIMIT_NONE, - CHARGERUSB_CINLIMIT); - twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, MBAT_TEMP, - CONTROLLER_INT_MASK); - twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, MASK_MCHARGERUSB_THMREG, - CHARGERUSB_INT_MASK); - twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CHARGERUSB_VOREG_4P0, - CHARGERUSB_VOREG); - twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CHARGERUSB_CTRL2_VITERM_400, - CHARGERUSB_CTRL2); - twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, TERM, CHARGERUSB_CTRL1); + twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, + CHARGERUSB_VICHRG, CHARGERUSB_VICHRG_1500); + twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, + CHARGERUSB_CINLIMIT, CHARGERUSB_CIN_LIMIT_NONE); + twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, + CONTROLLER_INT_MASK, MBAT_TEMP); + twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, + CHARGERUSB_INT_MASK, MASK_MCHARGERUSB_THMREG); + twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, + CHARGERUSB_VOREG, CHARGERUSB_VOREG_4P0); + twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, + CHARGERUSB_CTRL2, CHARGERUSB_CTRL2_VITERM_400); + twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CHARGERUSB_CTRL1, TERM); /* Enable USB charging */ - twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CONTROLLER_CTRL1_EN_CHARGER, - CONTROLLER_CTRL1); + twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, + CONTROLLER_CTRL1, CONTROLLER_CTRL1_EN_CHARGER); return; } @@ -111,8 +100,8 @@ int twl6030_get_battery_current(void) u8 msb = 0; u8 lsb = 0; - twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, &msb, FG_REG_11); - twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, &lsb, FG_REG_10); + twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, FG_REG_11, &msb); + twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, FG_REG_10, &lsb); battery_current = ((msb << 8) | lsb); /* convert 10 bit signed number to 16 bit signed number */ @@ -156,10 +145,10 @@ void twl6030_init_battery_charging(void) int ret = 0; /* Enable VBAT measurement */ - twl6030_i2c_write_u8(TWL6030_CHIP_PM, VBAT_MEAS, MISC1); + twl6030_i2c_write_u8(TWL6030_CHIP_PM, MISC1, VBAT_MEAS); /* Enable GPADC module */ - ret = twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, FGS | GPADCS, TOGGLE1); + ret = twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, TOGGLE1, FGS | GPADCS); if (ret) { printf("Failed to enable GPADC\n"); return; @@ -173,7 +162,7 @@ void twl6030_init_battery_charging(void) printf("Main battery voltage too low!\n"); /* Check for the presence of USB charger */ - twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, &stat1, CONTROLLER_STAT1); + twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, CONTROLLER_STAT1, &stat1); /* check for battery presence indirectly via Fuel gauge */ if ((stat1 & VBUS_DET) && (battery_volt < 3300)) @@ -185,8 +174,8 @@ void twl6030_init_battery_charging(void) void twl6030_power_mmc_init() { /* set voltage to 3.0 and turnon for APP */ - twl6030_i2c_write_u8(TWL6030_CHIP_PM, 0x15, VMMC_CFG_VOLTATE); - twl6030_i2c_write_u8(TWL6030_CHIP_PM, 0x21, VMMC_CFG_STATE); + twl6030_i2c_write_u8(TWL6030_CHIP_PM, VMMC_CFG_VOLTATE, 0x15); + twl6030_i2c_write_u8(TWL6030_CHIP_PM, VMMC_CFG_STATE, 0x21); } void twl6030_usb_device_settings() @@ -194,12 +183,12 @@ void twl6030_usb_device_settings() u8 data = 0; /* Select APP Group and set state to ON */ - twl6030_i2c_write_u8(TWL6030_CHIP_PM, 0x21, VUSB_CFG_STATE); + twl6030_i2c_write_u8(TWL6030_CHIP_PM, VUSB_CFG_STATE, 0x21); - twl6030_i2c_read_u8(TWL6030_CHIP_PM, &data, MISC2); + twl6030_i2c_read_u8(TWL6030_CHIP_PM, MISC2, &data); data |= 0x10; /* Select the input supply for VBUS regulator */ - twl6030_i2c_write_u8(TWL6030_CHIP_PM, data, MISC2); + twl6030_i2c_write_u8(TWL6030_CHIP_PM, MISC2, data); } #endif diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c index f4b1bad..52594e3 100644 --- a/drivers/spi/atmel_spi.c +++ b/drivers/spi/atmel_spi.c @@ -30,6 +30,15 @@ #include "atmel_spi.h" +static int spi_has_wdrbt(struct atmel_spi_slave *slave) +{ + unsigned int ver; + + ver = spi_readl(slave, VERSION); + + return (ATMEL_SPI_VERSION_REV(ver) >= 0x210); +} + void spi_init() { @@ -90,10 +99,10 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, as->regs = regs; as->mr = ATMEL_SPI_MR_MSTR | ATMEL_SPI_MR_MODFDIS -#if defined(CONFIG_AT91SAM9X5) || defined(CONFIG_AT91SAM9M10G45) - | ATMEL_SPI_MR_WDRBT -#endif | ATMEL_SPI_MR_PCS(~(1 << cs) & 0xf); + if (spi_has_wdrbt(as)) + as->mr |= ATMEL_SPI_MR_WDRBT; + spi_writel(as, CSR(cs), csrx); return &as->slave; diff --git a/drivers/spi/atmel_spi.h b/drivers/spi/atmel_spi.h index 057de9a..d240945 100644 --- a/drivers/spi/atmel_spi.h +++ b/drivers/spi/atmel_spi.h @@ -64,7 +64,7 @@ #define ATMEL_SPI_CSRx_DLYBCT(x) ((x) << 24) /* Bits in VERSION */ -#define ATMEL_SPI_VERSION_REV(x) ((x) << 0) +#define ATMEL_SPI_VERSION_REV(x) ((x) & 0xfff) #define ATMEL_SPI_VERSION_MFN(x) ((x) << 16) /* Constants for CSRx:BITS */ diff --git a/drivers/spi/mxs_spi.c b/drivers/spi/mxs_spi.c index aa999f9..db98a13 100644 --- a/drivers/spi/mxs_spi.c +++ b/drivers/spi/mxs_spi.c @@ -31,7 +31,7 @@ #include <asm/arch/clock.h> #include <asm/arch/imx-regs.h> #include <asm/arch/sys_proto.h> -#include <asm/arch/dma.h> +#include <asm/imx-common/dma.h> #define MXS_SPI_MAX_TIMEOUT 1000000 #define MXS_SPI_PORT_OFFSET 0x2000 diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c index 4c00081..71cc0f2 100644 --- a/drivers/usb/gadget/pxa27x_udc.c +++ b/drivers/usb/gadget/pxa27x_udc.c @@ -610,7 +610,9 @@ void udc_connect(void) #ifdef CONFIG_USB_DEV_PULLUP_GPIO /* Turn on the USB connection by enabling the pullup resistor */ - set_GPIO_mode(CONFIG_USB_DEV_PULLUP_GPIO | GPIO_OUT); + writel(readl(GPDR(CONFIG_USB_DEV_PULLUP_GPIO)) + | GPIO_bit(CONFIG_USB_DEV_PULLUP_GPIO), + GPDR(CONFIG_USB_DEV_PULLUP_GPIO)); writel(GPIO_bit(CONFIG_USB_DEV_PULLUP_GPIO), GPSR(CONFIG_USB_DEV_PULLUP_GPIO)); #else /* Host port 2 transceiver D+ pull up enable */ diff --git a/drivers/usb/host/ehci-mx5.c b/drivers/usb/host/ehci-mx5.c index adbed5c..f43c38d 100644 --- a/drivers/usb/host/ehci-mx5.c +++ b/drivers/usb/host/ehci-mx5.c @@ -21,8 +21,6 @@ #include <asm/io.h> #include <asm/arch/imx-regs.h> #include <asm/arch/clock.h> -#include <asm/arch/mx5x_pins.h> -#include <asm/arch/iomux.h> #include "ehci.h" @@ -87,77 +85,6 @@ /* USB_CTRL_1 */ #define MXC_USB_CTRL_UH1_EXT_CLK_EN (1 << 25) -/* USB pin configuration */ -#define USB_PAD_CONFIG (PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST | \ - PAD_CTL_DRV_HIGH | PAD_CTL_100K_PU | \ - PAD_CTL_HYS_ENABLE | PAD_CTL_PUE_PULL) - -#ifdef CONFIG_MX51 -/* - * Configure the MX51 USB H1 IOMUX - */ -void setup_iomux_usb_h1(void) -{ - mxc_request_iomux(MX51_PIN_USBH1_STP, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_USBH1_STP, USB_PAD_CONFIG); - mxc_request_iomux(MX51_PIN_USBH1_CLK, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_USBH1_CLK, USB_PAD_CONFIG); - mxc_request_iomux(MX51_PIN_USBH1_DIR, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_USBH1_DIR, USB_PAD_CONFIG); - mxc_request_iomux(MX51_PIN_USBH1_NXT, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_USBH1_NXT, USB_PAD_CONFIG); - - mxc_request_iomux(MX51_PIN_USBH1_DATA0, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_USBH1_DATA0, USB_PAD_CONFIG); - mxc_request_iomux(MX51_PIN_USBH1_DATA1, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_USBH1_DATA1, USB_PAD_CONFIG); - mxc_request_iomux(MX51_PIN_USBH1_DATA2, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_USBH1_DATA2, USB_PAD_CONFIG); - mxc_request_iomux(MX51_PIN_USBH1_DATA3, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_USBH1_DATA3, USB_PAD_CONFIG); - mxc_request_iomux(MX51_PIN_USBH1_DATA4, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_USBH1_DATA4, USB_PAD_CONFIG); - mxc_request_iomux(MX51_PIN_USBH1_DATA5, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_USBH1_DATA5, USB_PAD_CONFIG); - mxc_request_iomux(MX51_PIN_USBH1_DATA6, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_USBH1_DATA6, USB_PAD_CONFIG); - mxc_request_iomux(MX51_PIN_USBH1_DATA7, IOMUX_CONFIG_ALT0); - mxc_iomux_set_pad(MX51_PIN_USBH1_DATA7, USB_PAD_CONFIG); -} - -/* - * Configure the MX51 USB H2 IOMUX - */ -void setup_iomux_usb_h2(void) -{ - mxc_request_iomux(MX51_PIN_EIM_A24, IOMUX_CONFIG_ALT2); - mxc_iomux_set_pad(MX51_PIN_EIM_A24, USB_PAD_CONFIG); - mxc_request_iomux(MX51_PIN_EIM_A25, IOMUX_CONFIG_ALT2); - mxc_iomux_set_pad(MX51_PIN_EIM_A25, USB_PAD_CONFIG); - mxc_request_iomux(MX51_PIN_EIM_A26, IOMUX_CONFIG_ALT2); - mxc_iomux_set_pad(MX51_PIN_EIM_A26, USB_PAD_CONFIG); - mxc_request_iomux(MX51_PIN_EIM_A27, IOMUX_CONFIG_ALT2); - mxc_iomux_set_pad(MX51_PIN_EIM_A27, USB_PAD_CONFIG); - - mxc_request_iomux(MX51_PIN_EIM_D16, IOMUX_CONFIG_ALT2); - mxc_iomux_set_pad(MX51_PIN_EIM_D16, USB_PAD_CONFIG); - mxc_request_iomux(MX51_PIN_EIM_D17, IOMUX_CONFIG_ALT2); - mxc_iomux_set_pad(MX51_PIN_EIM_D17, USB_PAD_CONFIG); - mxc_request_iomux(MX51_PIN_EIM_D18, IOMUX_CONFIG_ALT2); - mxc_iomux_set_pad(MX51_PIN_EIM_D18, USB_PAD_CONFIG); - mxc_request_iomux(MX51_PIN_EIM_D19, IOMUX_CONFIG_ALT2); - mxc_iomux_set_pad(MX51_PIN_EIM_D19, USB_PAD_CONFIG); - mxc_request_iomux(MX51_PIN_EIM_D20, IOMUX_CONFIG_ALT2); - mxc_iomux_set_pad(MX51_PIN_EIM_D20, USB_PAD_CONFIG); - mxc_request_iomux(MX51_PIN_EIM_D21, IOMUX_CONFIG_ALT2); - mxc_iomux_set_pad(MX51_PIN_EIM_D21, USB_PAD_CONFIG); - mxc_request_iomux(MX51_PIN_EIM_D22, IOMUX_CONFIG_ALT2); - mxc_iomux_set_pad(MX51_PIN_EIM_D22, USB_PAD_CONFIG); - mxc_request_iomux(MX51_PIN_EIM_D23, IOMUX_CONFIG_ALT2); - mxc_iomux_set_pad(MX51_PIN_EIM_D23, USB_PAD_CONFIG); -} -#endif - int mxc_set_usbcontrol(int port, unsigned int flags) { unsigned int v; diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index aa5cf57..2060a3e 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -42,7 +42,7 @@ int usb_cpu_init(void) while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB) ; #elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) || \ - defined(CONFIG_AT91SAM9X5) + defined(CONFIG_AT91SAM9X5) || defined(CONFIG_SAMA5D3) /* Enable UPLL */ writel(readl(&pmc->uckr) | AT91_PMC_UPLLEN | AT91_PMC_BIASEN, &pmc->uckr); @@ -54,7 +54,12 @@ int usb_cpu_init(void) #endif /* Enable USB host clock. */ +#ifdef CONFIG_SAMA5D3 + writel(1 << (ATMEL_ID_UHP - 32), &pmc->pcer1); +#else writel(1 << ATMEL_ID_UHP, &pmc->pcer); +#endif + #if defined(CONFIG_AT91SAM9261) || defined(CONFIG_AT91SAM9G10) writel(ATMEL_PMC_UHP | AT91_PMC_HCK0, &pmc->scer); #else @@ -69,7 +74,12 @@ int usb_cpu_stop(void) at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC; /* Disable USB host clock. */ +#ifdef CONFIG_SAMA5D3 + writel(1 << (ATMEL_ID_UHP - 32), &pmc->pcdr1); +#else writel(1 << ATMEL_ID_UHP, &pmc->pcdr); +#endif + #if defined(CONFIG_AT91SAM9261) || defined(CONFIG_AT91SAM9G10) writel(ATMEL_PMC_UHP | AT91_PMC_HCK0, &pmc->scdr); #else @@ -83,7 +93,7 @@ int usb_cpu_stop(void) while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != 0) ; #elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) || \ - defined(CONFIG_AT91SAM9X5) + defined(CONFIG_AT91SAM9X5) || defined(CONFIG_SAMA5D3) /* Disable UPLL */ writel(readl(&pmc->uckr) & (~AT91_PMC_UPLLEN), &pmc->uckr); while ((readl(&pmc->sr) & AT91_PMC_LOCKU) == AT91_PMC_LOCKU) diff --git a/drivers/usb/phy/twl4030.c b/drivers/usb/phy/twl4030.c index 54d2e61..74f1dcc 100644 --- a/drivers/usb/phy/twl4030.c +++ b/drivers/usb/phy/twl4030.c @@ -54,7 +54,7 @@ static int twl4030_usb_write(u8 address, u8 data) { int ret; - ret = twl4030_i2c_write_u8(TWL4030_CHIP_USB, data, address); + ret = twl4030_i2c_write_u8(TWL4030_CHIP_USB, address, data); if (ret != 0) printf("TWL4030:USB:Write[0x%x] Error %d\n", address, ret); @@ -66,7 +66,7 @@ static int twl4030_usb_read(u8 address) u8 data; int ret; - ret = twl4030_i2c_read_u8(TWL4030_CHIP_USB, &data, address); + ret = twl4030_i2c_read_u8(TWL4030_CHIP_USB, address, &data); if (ret == 0) ret = data; else @@ -78,40 +78,40 @@ static int twl4030_usb_read(u8 address) static void twl4030_usb_ldo_init(void) { /* Enable writing to power configuration registers */ - twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, 0xC0, - TWL4030_PM_MASTER_PROTECT_KEY); - twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, 0x0C, - TWL4030_PM_MASTER_PROTECT_KEY); + twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, + TWL4030_PM_MASTER_PROTECT_KEY, 0xC0); + twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, + TWL4030_PM_MASTER_PROTECT_KEY, 0x0C); /* put VUSB3V1 LDO in active state */ - twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 0x00, - TWL4030_PM_RECEIVER_VUSB_DEDICATED2); + twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, + TWL4030_PM_RECEIVER_VUSB_DEDICATED2, 0x00); /* input to VUSB3V1 LDO is from VBAT, not VBUS */ - twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 0x14, - TWL4030_PM_RECEIVER_VUSB_DEDICATED1); + twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, + TWL4030_PM_RECEIVER_VUSB_DEDICATED1, 0x14); /* turn on 3.1V regulator */ - twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 0x20, - TWL4030_PM_RECEIVER_VUSB3V1_DEV_GRP); - twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 0x00, - TWL4030_PM_RECEIVER_VUSB3V1_TYPE); + twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, + TWL4030_PM_RECEIVER_VUSB3V1_DEV_GRP, 0x20); + twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, + TWL4030_PM_RECEIVER_VUSB3V1_TYPE, 0x00); /* turn on 1.5V regulator */ - twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 0x20, - TWL4030_PM_RECEIVER_VUSB1V5_DEV_GRP); - twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 0x00, - TWL4030_PM_RECEIVER_VUSB1V5_TYPE); + twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, + TWL4030_PM_RECEIVER_VUSB1V5_DEV_GRP, 0x20); + twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, + TWL4030_PM_RECEIVER_VUSB1V5_TYPE, 0x00); /* turn on 1.8V regulator */ - twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 0x20, - TWL4030_PM_RECEIVER_VUSB1V8_DEV_GRP); - twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 0x00, - TWL4030_PM_RECEIVER_VUSB1V8_TYPE); + twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, + TWL4030_PM_RECEIVER_VUSB1V8_DEV_GRP, 0x20); + twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, + TWL4030_PM_RECEIVER_VUSB1V8_TYPE, 0x00); /* disable access to power configuration registers */ - twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, 0x00, - TWL4030_PM_MASTER_PROTECT_KEY); + twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, + TWL4030_PM_MASTER_PROTECT_KEY, 0x00); } static void twl4030_phy_power(void) diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 53952ab..68ff34b 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -49,6 +49,7 @@ COBJS-$(CONFIG_VIDEO_MB862xx) += mb862xx.o videomodes.o COBJS-$(CONFIG_VIDEO_MB86R0xGDC) += mb86r0xgdc.o videomodes.o COBJS-$(CONFIG_VIDEO_MX3) += mx3fb.o videomodes.o COBJS-$(CONFIG_VIDEO_IPUV3) += mxc_ipuv3_fb.o ipu_common.o ipu_disp.o +COBJS-$(CONFIG_VIDEO_MXS) += mxsfb.o videomodes.o COBJS-$(CONFIG_VIDEO_OMAP3) += omap3_dss.o COBJS-$(CONFIG_VIDEO_SED13806) += sed13806.o COBJS-$(CONFIG_VIDEO_SM501) += sm501.o diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_console.c index 61e1058..0793f07 100644 --- a/drivers/video/cfb_console.c +++ b/drivers/video/cfb_console.c @@ -151,6 +151,10 @@ #endif #endif +#ifdef CONFIG_VIDEO_MXS +#define VIDEO_FB_16BPP_WORD_SWAP +#endif + /* * Defines for the MB862xx driver */ diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c new file mode 100644 index 0000000..461ff6e --- /dev/null +++ b/drivers/video/mxsfb.c @@ -0,0 +1,189 @@ +/* + * Freescale i.MX23/i.MX28 LCDIF driver + * + * Copyright (C) 2011-2013 Marek Vasut <marex@denx.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <malloc.h> +#include <video_fb.h> + +#include <asm/arch/imx-regs.h> +#include <asm/arch/clock.h> +#include <asm/arch/sys_proto.h> +#include <asm/errno.h> +#include <asm/io.h> + +#include "videomodes.h" + +#define PS2KHZ(ps) (1000000000UL / (ps)) + +static GraphicDevice panel; + +/* + * DENX M28EVK: + * setenv videomode + * video=ctfb:x:800,y:480,depth:18,mode:0,pclk:30066, + * le:0,ri:256,up:0,lo:45,hs:1,vs:1,sync:100663296,vmode:0 + */ + +static void mxs_lcd_init(GraphicDevice *panel, + struct ctfb_res_modes *mode, int bpp) +{ + struct mxs_lcdif_regs *regs = (struct mxs_lcdif_regs *)MXS_LCDIF_BASE; + uint32_t word_len = 0, bus_width = 0; + uint8_t valid_data = 0; + + /* Kick in the LCDIF clock */ + mxs_set_lcdclk(PS2KHZ(mode->pixclock)); + + /* Restart the LCDIF block */ + mxs_reset_block(®s->hw_lcdif_ctrl_reg); + + switch (bpp) { + case 24: + word_len = LCDIF_CTRL_WORD_LENGTH_24BIT; + bus_width = LCDIF_CTRL_LCD_DATABUS_WIDTH_24BIT; + valid_data = 0x7; + break; + case 18: + word_len = LCDIF_CTRL_WORD_LENGTH_24BIT; + bus_width = LCDIF_CTRL_LCD_DATABUS_WIDTH_18BIT; + valid_data = 0x7; + break; + case 16: + word_len = LCDIF_CTRL_WORD_LENGTH_16BIT; + bus_width = LCDIF_CTRL_LCD_DATABUS_WIDTH_16BIT; + valid_data = 0xf; + break; + case 8: + word_len = LCDIF_CTRL_WORD_LENGTH_8BIT; + bus_width = LCDIF_CTRL_LCD_DATABUS_WIDTH_8BIT; + valid_data = 0xf; + break; + } + + writel(bus_width | word_len | LCDIF_CTRL_DOTCLK_MODE | + LCDIF_CTRL_BYPASS_COUNT | LCDIF_CTRL_LCDIF_MASTER, + ®s->hw_lcdif_ctrl); + + writel(valid_data << LCDIF_CTRL1_BYTE_PACKING_FORMAT_OFFSET, + ®s->hw_lcdif_ctrl1); + writel((mode->yres << LCDIF_TRANSFER_COUNT_V_COUNT_OFFSET) | mode->xres, + ®s->hw_lcdif_transfer_count); + + writel(LCDIF_VDCTRL0_ENABLE_PRESENT | LCDIF_VDCTRL0_ENABLE_POL | + LCDIF_VDCTRL0_VSYNC_PERIOD_UNIT | + LCDIF_VDCTRL0_VSYNC_PULSE_WIDTH_UNIT | + mode->vsync_len, ®s->hw_lcdif_vdctrl0); + writel(mode->upper_margin + mode->lower_margin + + mode->vsync_len + mode->yres, + ®s->hw_lcdif_vdctrl1); + writel((mode->hsync_len << LCDIF_VDCTRL2_HSYNC_PULSE_WIDTH_OFFSET) | + (mode->left_margin + mode->right_margin + + mode->hsync_len + mode->xres), + ®s->hw_lcdif_vdctrl2); + writel(((mode->left_margin + mode->hsync_len) << + LCDIF_VDCTRL3_HORIZONTAL_WAIT_CNT_OFFSET) | + (mode->upper_margin + mode->vsync_len), + ®s->hw_lcdif_vdctrl3); + writel((0 << LCDIF_VDCTRL4_DOTCLK_DLY_SEL_OFFSET) | mode->xres, + ®s->hw_lcdif_vdctrl4); + + writel(panel->frameAdrs, ®s->hw_lcdif_cur_buf); + writel(panel->frameAdrs, ®s->hw_lcdif_next_buf); + + /* Flush FIFO first */ + writel(LCDIF_CTRL1_FIFO_CLEAR, ®s->hw_lcdif_ctrl1_set); + + /* Sync signals ON */ + setbits_le32(®s->hw_lcdif_vdctrl4, LCDIF_VDCTRL4_SYNC_SIGNALS_ON); + + /* FIFO cleared */ + writel(LCDIF_CTRL1_FIFO_CLEAR, ®s->hw_lcdif_ctrl1_clr); + + /* RUN! */ + writel(LCDIF_CTRL_RUN, ®s->hw_lcdif_ctrl_set); +} + +void *video_hw_init(void) +{ + int bpp = -1; + char *penv; + void *fb; + struct ctfb_res_modes mode; + + puts("Video: "); + + /* Suck display configuration from "videomode" variable */ + penv = getenv("videomode"); + if (!penv) { + printf("MXSFB: 'videomode' variable not set!"); + return NULL; + } + + bpp = video_get_params(&mode, penv); + + /* fill in Graphic device struct */ + sprintf(panel.modeIdent, "%dx%dx%d", + mode.xres, mode.yres, bpp); + + panel.winSizeX = mode.xres; + panel.winSizeY = mode.yres; + panel.plnSizeX = mode.xres; + panel.plnSizeY = mode.yres; + + switch (bpp) { + case 24: + case 18: + panel.gdfBytesPP = 4; + panel.gdfIndex = GDF_32BIT_X888RGB; + break; + case 16: + panel.gdfBytesPP = 2; + panel.gdfIndex = GDF_16BIT_565RGB; + break; + case 8: + panel.gdfBytesPP = 1; + panel.gdfIndex = GDF__8BIT_INDEX; + break; + default: + printf("MXSFB: Invalid BPP specified! (bpp = %i)\n", bpp); + return NULL; + } + + panel.memSize = mode.xres * mode.yres * panel.gdfBytesPP; + + /* Allocate framebuffer */ + fb = malloc(panel.memSize); + if (!fb) { + printf("MXSFB: Error allocating framebuffer!\n"); + return NULL; + } + + /* Wipe framebuffer */ + memset(fb, 0, panel.memSize); + + panel.frameAdrs = (u32)fb; + + printf("%s\n", panel.modeIdent); + + /* Start framebuffer */ + mxs_lcd_init(&panel, &mode, bpp); + + return (void *)&panel; +} diff --git a/drivers/video/pxa_lcd.c b/drivers/video/pxa_lcd.c index b40ec36..5e4c685 100644 --- a/drivers/video/pxa_lcd.c +++ b/drivers/video/pxa_lcd.c @@ -248,6 +248,38 @@ vidinfo_t panel_info = { }; #endif /* CONFIG_ACX517AKN */ +#ifdef CONFIG_ACX544AKN + +# define LCD_BPP LCD_COLOR16 + +/* you have to set lccr0 and lccr3 (including pcd) */ +# define REG_LCCR0 0x003008f9 +# define REG_LCCR3 0x04700007 /* 16bpp */ + +vidinfo_t panel_info = { + .vl_col = 320, + .vl_row = 320, + .vl_width = 320, + .vl_height = 320, + .vl_clkp = CONFIG_SYS_LOW, + .vl_oep = CONFIG_SYS_LOW, + .vl_hsp = CONFIG_SYS_LOW, + .vl_vsp = CONFIG_SYS_LOW, + .vl_dp = CONFIG_SYS_LOW, + .vl_bpix = LCD_BPP, + .vl_lbw = 0, + .vl_splt = 0, + .vl_clor = 1, + .vl_tft = 1, + .vl_hpw = 0x05, + .vl_blw = 0x13, + .vl_elw = 0x08, + .vl_vpw = 0x02, + .vl_bfw = 0x07, + .vl_efw = 0x05, +}; +#endif /* CONFIG_ACX544AKN */ + /*----------------------------------------------------------------------*/ #ifdef CONFIG_LQ038J7DH53 @@ -378,7 +410,7 @@ void lcd_initcolregs (void) #endif /* LCD_MONOCHROME */ /*----------------------------------------------------------------------*/ -void lcd_enable (void) +__weak void lcd_enable(void) { } diff --git a/include/altera.h b/include/altera.h index 7a2bece..6aad5ee 100644 --- a/include/altera.h +++ b/include/altera.h @@ -27,23 +27,6 @@ #ifndef _ALTERA_H_ #define _ALTERA_H_ -/* Altera Model definitions - *********************************************************************/ -#define CONFIG_SYS_ACEX1K CONFIG_SYS_FPGA_DEV( 0x1 ) -#define CONFIG_SYS_CYCLON2 CONFIG_SYS_FPGA_DEV( 0x2 ) -#define CONFIG_SYS_STRATIX_II CONFIG_SYS_FPGA_DEV( 0x4 ) - -#define CONFIG_SYS_ALTERA_ACEX1K (CONFIG_SYS_FPGA_ALTERA | CONFIG_SYS_ACEX1K) -#define CONFIG_SYS_ALTERA_CYCLON2 (CONFIG_SYS_FPGA_ALTERA | CONFIG_SYS_CYCLON2) -#define CONFIG_SYS_ALTERA_STRATIX_II (CONFIG_SYS_FPGA_ALTERA | CONFIG_SYS_STRATIX_II) -/* Add new models here */ - -/* Altera Interface definitions - *********************************************************************/ -#define CONFIG_SYS_ALTERA_IF_PS CONFIG_SYS_FPGA_IF( 0x1 ) /* passive serial */ -#define CONFIG_SYS_ALTERA_IF_FPP CONFIG_SYS_FPGA_IF( 0x2 ) /* fast passive parallel */ -/* Add new interfaces here */ - typedef enum { /* typedef Altera_iface */ min_altera_iface_type, /* insert all new types after this */ passive_serial, /* serial data and external clock */ diff --git a/include/atmel_mci.h b/include/atmel_mci.h index c711881..31c4569 100644 --- a/include/atmel_mci.h +++ b/include/atmel_mci.h @@ -52,6 +52,8 @@ typedef struct atmel_mci { u32 ier; /* 0x44 */ u32 idr; /* 0x48 */ u32 imr; /* 0x4c */ + u32 reserved[43]; + u32 version; } atmel_mci_t; #endif /* __ASSEMBLY__ */ diff --git a/include/config_cmd_all.h b/include/config_cmd_all.h index 53a2f05..d847069 100644 --- a/include/config_cmd_all.h +++ b/include/config_cmd_all.h @@ -40,6 +40,7 @@ #define CONFIG_CMD_FDOS /* Floppy DOS support */ #define CONFIG_CMD_FLASH /* flinfo, erase, protect */ #define CONFIG_CMD_FPGA /* FPGA configuration Support */ +#define CONFIG_CMD_FUSE /* Device fuse support */ #define CONFIG_CMD_GETTIME /* Get time since boot */ #define CONFIG_CMD_HASH /* calculate hash / digest */ #define CONFIG_CMD_HWFLOW /* RTS/CTS hw flow control */ diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h index 1bc2c5a..536b755 100644 --- a/include/configs/M54455EVB.h +++ b/include/configs/M54455EVB.h @@ -238,7 +238,7 @@ /* FPGA - Spartan 2 */ /* experiment -#define CONFIG_FPGA CONFIG_SYS_SPARTAN3 +#define CONFIG_FPGA #define CONFIG_FPGA_COUNT 1 #define CONFIG_SYS_FPGA_PROG_FEEDBACK #define CONFIG_SYS_FPGA_CHECK_CTRLC diff --git a/include/configs/MERGERBOX.h b/include/configs/MERGERBOX.h index c296e3c..30fb6c2 100644 --- a/include/configs/MERGERBOX.h +++ b/include/configs/MERGERBOX.h @@ -606,7 +606,7 @@ * FPGA */ #define CONFIG_FPGA_COUNT 1 -#define CONFIG_FPGA CONFIG_SYS_ALTERA_CYCLON2 +#define CONFIG_FPGA #define CONFIG_FPGA_ALTERA #define CONFIG_FPGA_CYCLON2 diff --git a/include/configs/MVBC_P.h b/include/configs/MVBC_P.h index 6850965..7271468 100644 --- a/include/configs/MVBC_P.h +++ b/include/configs/MVBC_P.h @@ -310,7 +310,7 @@ #undef FPGA_DEBUG #undef CONFIG_SYS_FPGA_PROG_FEEDBACK -#define CONFIG_FPGA CONFIG_SYS_ALTERA_CYCLON2 +#define CONFIG_FPGA #define CONFIG_FPGA_ALTERA 1 #define CONFIG_FPGA_CYCLON2 1 #define CONFIG_FPGA_COUNT 1 diff --git a/include/configs/MVBLM7.h b/include/configs/MVBLM7.h index a99ad3c..a9c00ac 100644 --- a/include/configs/MVBLM7.h +++ b/include/configs/MVBLM7.h @@ -499,7 +499,7 @@ "" #define CONFIG_FPGA_COUNT 1 -#define CONFIG_FPGA CONFIG_SYS_ALTERA_CYCLON2 +#define CONFIG_FPGA #define CONFIG_FPGA_ALTERA #define CONFIG_FPGA_CYCLON2 diff --git a/include/configs/MVSMR.h b/include/configs/MVSMR.h index bf2f44e..5d2ff14 100644 --- a/include/configs/MVSMR.h +++ b/include/configs/MVSMR.h @@ -280,7 +280,7 @@ #undef FPGA_DEBUG #undef CONFIG_SYS_FPGA_PROG_FEEDBACK -#define CONFIG_FPGA CONFIG_SYS_XILINX_SPARTAN2 +#define CONFIG_FPGA #define CONFIG_FPGA_XILINX 1 #define CONFIG_FPGA_SPARTAN2 1 #define CONFIG_FPGA_COUNT 1 diff --git a/include/configs/ac14xx.h b/include/configs/ac14xx.h index ac7e877..7cb10fb 100644 --- a/include/configs/ac14xx.h +++ b/include/configs/ac14xx.h @@ -368,6 +368,11 @@ #define CONFIG_SYS_I2C_SLAVE 0x7F /* + * IIM - IC Identification Module + */ +#undef CONFIG_FSL_IIM + +/* * EEPROM configuration for Atmel AT24C01: * 8-bit addresses, 30ms write delay, 32-Byte Page Write Mode */ diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index ef00306..f019134 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -17,6 +17,7 @@ #define __CONFIG_AM335X_EVM_H #define CONFIG_AM33XX +#define CONFIG_OMAP #include <asm/arch/omap.h> @@ -196,7 +197,6 @@ + (8 * 1024 * 1024)) #define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */ -#define CONFIG_SYS_HZ 1000 /* 1ms clock */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC @@ -260,12 +260,11 @@ /* Platform/Board specific defs */ #define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 +#define CONFIG_SYS_HZ 1000 /* 1ms clock */ /* NS16550 Configuration */ #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SERIAL_MULTI #define CONFIG_SYS_NS16550_REG_SIZE (-4) #define CONFIG_SYS_NS16550_CLK (48000000) #define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */ @@ -295,6 +294,9 @@ #define CONFIG_SYS_BAUDRATE_TABLE { 110, 300, 600, 1200, 2400, \ 4800, 9600, 14400, 19200, 28800, 38400, 56000, 57600, 115200 } +/* CPU */ +#define CONFIG_ARCH_CPU_INIT + #define CONFIG_ENV_OVERWRITE 1 #define CONFIG_SYS_CONSOLE_INFO_QUIET @@ -360,11 +362,7 @@ #define CONFIG_SYS_NAND_ECCSIZE 512 #define CONFIG_SYS_NAND_ECCBYTES 14 -#define CONFIG_SYS_NAND_ECCSTEPS 4 -#define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \ - CONFIG_SYS_NAND_ECCSTEPS) - -#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 diff --git a/include/configs/aria.h b/include/configs/aria.h index b425399..5318aaf 100644 --- a/include/configs/aria.h +++ b/include/configs/aria.h @@ -383,7 +383,7 @@ /* * IIM - IC Identification Module */ -#undef CONFIG_IIM +#undef CONFIG_FSL_IIM /* * EEPROM configuration for Atmel AT24C32A-10TQ-2.7: diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h index ebcc69a..4328944 100644 --- a/include/configs/at91sam9260ek.h +++ b/include/configs/at91sam9260ek.h @@ -105,6 +105,8 @@ #define CONFIG_CMD_PING 1 #define CONFIG_CMD_DHCP 1 #define CONFIG_CMD_NAND 1 +#define CONFIG_CMD_MMC +#define CONFIG_CMD_FAT #define CONFIG_CMD_USB 1 /* @@ -128,6 +130,24 @@ (ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE) #endif +/* + * The (arm)linux board id set by generic code depending on configured board + * (see boards.cfg for different boards) + */ +#ifdef CONFIG_AT91SAM9G20 + /* the sam9g20 variants have two different board ids */ +# ifdef CONFIG_AT91SAM9G20EK_2MMC + /* we may be setup for the 2MMC variant of at91sam9g20ek */ +# define CONFIG_MACH_TYPE MACH_TYPE_AT91SAM9G20EK_2MMC +# else + /* or the normal at91sam9g20ek */ +# define CONFIG_MACH_TYPE MACH_TYPE_AT91SAM9G20EK +# endif +#else + /* otherwise default to good old at91sam9260ek */ +# define CONFIG_MACH_TYPE MACH_TYPE_AT91SAM9260EK +#endif + /* DataFlash */ #ifndef CONFIG_AT91SAM9G20EK_2MMC #define CONFIG_ATMEL_DATAFLASH_SPI @@ -158,6 +178,18 @@ #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13 #endif +/* MMC */ +#ifdef CONFIG_CMD_MMC +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_GENERIC_ATMEL_MCI +#endif + +/* FAT */ +#ifdef CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#endif + /* NOR flash - no real flash on this board */ #define CONFIG_SYS_NO_FLASH 1 @@ -170,13 +202,11 @@ /* USB */ #define CONFIG_USB_ATMEL #define CONFIG_USB_OHCI_NEW 1 -#define CONFIG_DOS_PARTITION 1 #define CONFIG_SYS_USB_OHCI_CPU_INIT 1 #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9260_UHP_BASE */ #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260" #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 #define CONFIG_USB_STORAGE 1 -#define CONFIG_CMD_FAT 1 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ @@ -211,7 +241,7 @@ "mtdparts=atmel_nand:-(root) " \ "rw rootfstype=jffs2" -#else /* CONFIG_SYS_USE_NANDFLASH */ +#elif defined(CONFIG_SYS_USE_NANDFLASH) /* bootstrap + u-boot + env + linux in nandflash */ #define CONFIG_ENV_IS_IN_NAND 1 @@ -226,6 +256,22 @@ "512k(dtb),6M(kernel)ro,-(rootfs) " \ "root=/dev/mtdblock7 rw rootfstype=jffs2" +#else /* CONFIG_SYS_USE_MMC */ +/* bootstrap + u-boot + env + linux in mmc */ +#define CONFIG_ENV_IS_IN_MMC +/* For FAT system, most cases it should be in the reserved sector */ +#define CONFIG_ENV_OFFSET 0x2000 +#define CONFIG_ENV_SIZE 0x1000 +#define CONFIG_SYS_MMC_ENV_DEV 0 + +#define CONFIG_BOOTCOMMAND \ + "fatload mmc 0:1 0x22000000 uImage; bootm" +#define CONFIG_BOOTARGS \ + "console=ttyS0,115200 earlyprintk " \ + "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ + "256k(env),256k(env_redundant),256k(spare)," \ + "512k(dtb),6M(kernel)ro,-(rootfs) " \ + "root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait" #endif #define CONFIG_SYS_PROMPT "U-Boot> " diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h new file mode 100644 index 0000000..8d2673d --- /dev/null +++ b/include/configs/at91sam9n12ek.h @@ -0,0 +1,232 @@ +/* + * (C) Copyright 2013 Atmel Corporation. + * Josh Wu <josh.wu@atmel.com> + * + * Configuation settings for the AT91SAM9N12-EK boards. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __AT91SAM9N12_CONFIG_H_ +#define __AT91SAM9N12_CONFIG_H_ + +/* + * SoC must be defined first, before hardware.h is included. + * In this case SoC is defined in boards.cfg. + */ +#include <asm/hardware.h> + +#define CONFIG_SYS_TEXT_BASE 0x26f00000 + +#define CONFIG_ARM926EJS +#define CONFIG_AT91FAMILY + +/* ARM asynchronous clock */ +#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ +#define CONFIG_SYS_AT91_MAIN_CLOCK 16000000 /* main clock xtal */ +#define CONFIG_SYS_HZ 1000 + +/* Misc CPU related */ +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_DISPLAY_CPUINFO + +#define CONFIG_OF_LIBFDT + +/* general purpose I/O */ +#define CONFIG_AT91_GPIO + +/* serial console */ +#define CONFIG_ATMEL_USART +#define CONFIG_USART_BASE ATMEL_BASE_DBGU +#define CONFIG_USART_ID ATMEL_ID_SYS +#define CONFIG_BAUDRATE 115200 + +/* LCD */ +#define CONFIG_LCD +#define LCD_BPP LCD_COLOR16 +#define LCD_OUTPUT_BPP 24 +#define CONFIG_LCD_LOGO +#define CONFIG_LCD_INFO +#define CONFIG_LCD_INFO_BELOW_LOGO +#define CONFIG_SYS_WHITE_ON_BLACK +#define CONFIG_ATMEL_HLCD +#define CONFIG_ATMEL_LCD_RGB565 +#define CONFIG_SYS_CONSOLE_IS_IN_ENV + +#define CONFIG_BOOTDELAY 3 + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* NOR flash - no real flash on this board */ +#define CONFIG_SYS_NO_FLASH + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> +#undef CONFIG_CMD_FPGA + +#define CONFIG_CMD_BOOTZ +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_NAND +#define CONFIG_CMD_SF +#define CONFIG_CMD_MMC +#define CONFIG_CMD_FAT + +#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_SYS_SDRAM_BASE 0x20000000 +#define CONFIG_SYS_SDRAM_SIZE 0x08000000 + +/* + * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM, + * leaving the correct space for initial global data structure above + * that address while providing maximum stack area below. + */ +# define CONFIG_SYS_INIT_SP_ADDR \ + (ATMEL_BASE_SRAM + 0x1000 - GENERATED_GBL_DATA_SIZE) + +/* DataFlash */ +#ifdef CONFIG_CMD_SF +#define CONFIG_ATMEL_SPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_ATMEL +#define CONFIG_SF_DEFAULT_SPEED 30000000 +#define CONFIG_ENV_SPI_MODE SPI_MODE_3 +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 +#endif + +/* NAND flash */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_NAND_ATMEL +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0x40000000 +#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) +#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTD, 4 +#define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTD, 5 + +/* PMECC & PMERRLOC */ +#define CONFIG_ATMEL_NAND_HWECC +#define CONFIG_ATMEL_NAND_HW_PMECC +#define CONFIG_PMECC_CAP 2 +#define CONFIG_PMECC_SECTOR_SIZE 512 +#define CONFIG_PMECC_INDEX_TABLE_OFFSET 0x8000 +#endif + +#define CONFIG_MTD_PARTITIONS +#define CONFIG_MTD_DEVICE +#define CONFIG_CMD_MTDPARTS +#define MTDIDS_DEFAULT "nand0=atmel_nand" +#define MTDPARTS_DEFAULT \ + "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ + "256k(env),256k(env_redundant),256k(spare)," \ + "512k(dtb),6M(kernel)ro,-(rootfs)" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "console=console=ttyS0,115200\0" \ + "mtdparts="MTDPARTS_DEFAULT"\0" \ + "bootargs_nand=rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs rw\0"\ + "bootargs_mmc=root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait\0" + +/* MMC */ +#ifdef CONFIG_CMD_MMC +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_GENERIC_ATMEL_MCI +#endif + +/* FAT */ +#ifdef CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#endif + +#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ + +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END 0x26e00000 + +#ifdef CONFIG_SYS_USE_SPIFLASH + +/* bootstrap + u-boot + env + linux in dataflash on CS0 */ +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_OFFSET 0x5000 +#define CONFIG_ENV_SIZE 0x3000 +#define CONFIG_ENV_SECT_SIZE 0x1000 +#define CONFIG_BOOTCOMMAND \ + "setenv bootargs ${console} ${mtdparts} ${bootargs_nand};" \ + "sf probe 0; sf read 0x22000000 0x100000 0x300000; " \ + "bootm 0x22000000" + +#elif defined(CONFIG_SYS_USE_NANDFLASH) + +/* bootstrap + u-boot + env + linux in nandflash */ +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET 0xc0000 +#define CONFIG_ENV_OFFSET_REDUND 0x100000 +#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ +#define CONFIG_BOOTCOMMAND \ + "setenv bootargs ${console} ${mtdparts} ${bootargs_nand};" \ + "nand read 0x21000000 0x180000 0x080000;" \ + "nand read 0x22000000 0x200000 0x400000;" \ + "bootm 0x22000000 - 0x21000000" + +#else /* CONFIG_SYS_USE_MMC */ + +/* bootstrap + u-boot + env + linux in mmc */ +#define CONFIG_ENV_IS_IN_MMC +/* For FAT system, most cases it should be in the reserved sector */ +#define CONFIG_ENV_OFFSET 0x2000 +#define CONFIG_ENV_SIZE 0x1000 +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_BOOTCOMMAND \ + "setenv bootargs ${console} ${mtdparts} ${bootargs_mmc};" \ + "fatload mmc 0:1 0x21000000 dtb;" \ + "fatload mmc 0:1 0x22000000 uImage;" \ + "bootm 0x22000000 - 0x21000000" + +#endif + +#define CONFIG_SYS_PROMPT "U-Boot> " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) \ + + 16) +#define CONFIG_SYS_LONGHELP +#define CONFIG_CMDLINE_EDITING +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_HUSH_PARSER + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) +#define CONFIG_STACKSIZE (32 * 1024) /* regular stack */ + +#endif diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index 726714d..c6e357a 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -135,12 +135,12 @@ #define CONFIG_CMD_CACHE #define CONFIG_CMD_EXT2 /* EXT2 Support */ #define CONFIG_CMD_FAT /* FAT support */ -#define CONFIG_CMD_JFFS2 /* JFFS2 Support */ #define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */ #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ +#define CONFIG_MTD_PARTITIONS #define MTDIDS_DEFAULT "nand0=nand" #define MTDPARTS_DEFAULT "mtdparts=nand:512k(x-loader),"\ - "1920k(u-boot),128k(u-boot-env),"\ + "1920k(u-boot),256k(u-boot-env),"\ "4m(kernel),-(fs)" #define CONFIG_CMD_I2C /* I2C serial bus support */ @@ -182,14 +182,6 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ /* devices */ -#define CONFIG_JFFS2_NAND -/* nand device jffs2 lives on */ -#define CONFIG_JFFS2_DEV "nand0" -/* start of jffs2 partition */ -#define CONFIG_JFFS2_PART_OFFSET 0x680000 -#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */ - /* partition */ - /* Environment information */ #define CONFIG_BOOTDELAY 10 #define CONFIG_ZERO_BOOTDELAY_CHECK @@ -204,9 +196,9 @@ "defaultdisplay=dvi\0" \ "mmcdev=0\0" \ "mmcroot=/dev/mmcblk0p2 rw\0" \ - "mmcrootfstype=ext3 rootwait\0" \ + "mmcrootfstype=ext4 rootwait\0" \ "nandroot=/dev/mtdblock4 rw\0" \ - "nandrootfstype=jffs2\0" \ + "nandrootfstype=ubifs\0" \ "mmcargs=setenv bootargs console=${console} " \ "mpurate=${mpurate} " \ "vram=${vram} " \ @@ -232,7 +224,7 @@ "bootm ${loadaddr}\0" \ "nandboot=echo Booting from nand ...; " \ "run nandargs; " \ - "nand read ${loadaddr} 280000 400000; " \ + "nand read ${loadaddr} 2a0000 400000; " \ "bootm ${loadaddr}\0" \ #define CONFIG_BOOTCOMMAND \ diff --git a/include/configs/da830evm.h b/include/configs/da830evm.h index f7ac256..198892b 100644 --- a/include/configs/da830evm.h +++ b/include/configs/da830evm.h @@ -109,8 +109,8 @@ #define CONFIG_SYS_NAND_CS 3 #define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE3_BASE #define CONFIG_SYS_NAND_PAGE_2K -#define CONFIG_SYS_CLE_MASK 0x10 -#define CONFIG_SYS_ALE_MASK 0x8 +#define CONFIG_SYS_NAND_MASK_CLE 0x10 +#define CONFIG_SYS_NAND_MASK_ALE 0x8 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #endif diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index 583568d..c420967 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -199,8 +199,8 @@ #define CONFIG_SYS_NAND_PAGE_2K #define CONFIG_SYS_NAND_CS 3 #define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE3_BASE -#define CONFIG_SYS_CLE_MASK 0x10 -#define CONFIG_SYS_ALE_MASK 0x8 +#define CONFIG_SYS_NAND_MASK_CLE 0x10 +#define CONFIG_SYS_NAND_MASK_ALE 0x8 #undef CONFIG_SYS_NAND_HW_ECC #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define CONFIG_SYS_NAND_HW_ECC_OOBFIRST diff --git a/include/configs/enbw_cmc.h b/include/configs/enbw_cmc.h index 2d63b67..97bc972 100644 --- a/include/configs/enbw_cmc.h +++ b/include/configs/enbw_cmc.h @@ -118,8 +118,8 @@ #define CONFIG_SYS_NAND_PAGE_2K #define CONFIG_SYS_NAND_CS 3 #define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE3_BASE -#define CONFIG_SYS_CLE_MASK 0x10 -#define CONFIG_SYS_ALE_MASK 0x8 +#define CONFIG_SYS_NAND_MASK_CLE 0x10 +#define CONFIG_SYS_NAND_MASK_ALE 0x8 #undef CONFIG_SYS_NAND_HW_ECC #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ diff --git a/include/configs/goflexhome.h b/include/configs/goflexhome.h new file mode 100644 index 0000000..e776514 --- /dev/null +++ b/include/configs/goflexhome.h @@ -0,0 +1,151 @@ +/* + * Copyright (C) 2013 Suriyan Ramasami <suriyan.r@gmail.com> + * + * Based on dockstar.h originally written by + * Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu> + * + * Based on sheevaplug.h originally written by + * Prafulla Wadaskar <prafulla@marvell.com> + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#ifndef _CONFIG_GOFLEXHOME_H +#define _CONFIG_GOFLEXHOME_H + +/* + * Version number information + */ +#define CONFIG_IDENT_STRING "\nSeagate GoFlex Home" + +/* + * High Level Configuration Options (easy to change) + */ +#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ +#define CONFIG_KIRKWOOD 1 /* SOC Family Name */ +#define CONFIG_KW88F6281 1 /* SOC Name */ +#define CONFIG_MACH_GOFLEXHOME /* Machine type */ +#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ + +/* + * Default GPIO configuration and LED status + */ +#define GOFLEXHOME_OE_LOW (~(0)) +#define GOFLEXHOME_OE_HIGH (~(0)) +#define GOFLEXHOME_OE_VAL_LOW (1 << 29) /* USB_PWEN low */ +#define GOFLEXHOME_OE_VAL_HIGH (1 << 17) /* LED pin high */ + +/* PHY related */ +#define MV88E1116_LED_FCTRL_REG 10 +#define MV88E1116_CPRSP_CR3_REG 21 +#define MV88E1116_MAC_CTRL_REG 21 +#define MV88E1116_PGADR_REG 22 +#define MV88E1116_RGMII_TXTM_CTRL (1 << 4) +#define MV88E1116_RGMII_RXTM_CTRL (1 << 5) + +/* + * Commands configuration + */ +#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ +#define CONFIG_CONSOLE_MUX +#define CONFIG_SYS_CONSOLE_IS_IN_ENV + +#include <config_cmd_default.h> +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ENV +#define CONFIG_CMD_MII +#define CONFIG_CMD_NAND +#define CONFIG_CMD_PING +#define CONFIG_CMD_USB +#define CONFIG_CMD_IDE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_EXT4 +#define CONFIG_SYS_MVFS /* Picks up Filesystem from mv-common.h */ + +/* + * mv-common.h should be defined after CMD configs since it used them + * to enable certain macros + */ +#include "mv-common.h" + +#undef CONFIG_SYS_PROMPT /* previously defined in mv-common.h */ +#define CONFIG_SYS_PROMPT "GoFlexHome> " /* Command Prompt */ + +/* + * Environment variables configurations + */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_ENV_IS_IN_NAND 1 +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ +#else +#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ +#endif +/* + * max 4k env size is enough, but in case of nand + * it has to be rounded to sector size + */ +#define CONFIG_ENV_SIZE 0x20000 /* 128k */ +#define CONFIG_ENV_ADDR 0xC0000 +#define CONFIG_ENV_OFFSET 0xC0000 /* env starts here */ + +/* + * Default environment variables + */ +#define CONFIG_BOOTCOMMAND \ + "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ + "ubi part root; " \ + "ubifsmount ubi:root; " \ + "ubifsload 0x800000 ${kernel}; " \ + "bootm 0x800000" + +#define CONFIG_MTDPARTS \ + "mtdparts=orion_nand:1m(uboot),6M(uImage),-(root)\0" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "console=console=ttyS0,115200\0" \ + "mtdids=nand0=orion_nand\0" \ + "mtdparts="CONFIG_MTDPARTS \ + "kernel=/boot/uImage\0" \ + "bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0" + +/* + * Ethernet Driver configuration + */ +#ifdef CONFIG_CMD_NET +#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ +#define CONFIG_PHY_BASE_ADR 0 +#endif /* CONFIG_CMD_NET */ + +/* + * * SATA Driver configuration + * */ +#ifdef CONFIG_MVSATA_IDE +#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET +#endif /*CONFIG_MVSATA_IDE*/ + +/* + * * RTC driver configuration + * */ +#ifdef CONFIG_CMD_DATE +#define CONFIG_RTC_MV +#endif /* CONFIG_CMD_DATE */ + +#endif /* _CONFIG_GOFLEXHOME_H */ diff --git a/include/configs/igep0033.h b/include/configs/igep0033.h new file mode 100644 index 0000000..1912d7d --- /dev/null +++ b/include/configs/igep0033.h @@ -0,0 +1,288 @@ +/* + * Copyright (C) 2013, ISEE 2007 SL - http://www.isee.biz/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __CONFIG_IGEP0033_H +#define __CONFIG_IGEP0033_H + +#define CONFIG_AM33XX +#define CONFIG_OMAP + +#include <asm/arch/omap.h> + +/* Mach type */ +#define MACH_TYPE_IGEP0033 4521 /* Until the next sync */ +#define CONFIG_MACH_TYPE MACH_TYPE_IGEP0033 + +/* Clock defines */ +#define V_OSCK 24000000 /* Clock output from T2 */ +#define V_SCLK (V_OSCK) + +/* DMA defines */ +#define CONFIG_DMA_COHERENT +#define CONFIG_DMA_COHERENT_SIZE (1 << 20) + +#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ +#define CONFIG_SYS_MALLOC_LEN (1024 << 10) +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT "U-Boot# " +#define CONFIG_SYS_NO_FLASH + +/* Display cpuinfo */ +#define CONFIG_DISPLAY_CPUINFO + +/* Commands to include */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BOOTZ +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ECHO +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_FS_GENERIC +#define CONFIG_CMD_MMC +#define CONFIG_CMD_MTDPARTS +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS + +/* + * Because the issues explained in doc/README.memory-test, the "mtest command + * is considered deprecated. It should not be enabled in most normal ports of + * U-Boot. + */ +#undef CONFIG_CMD_MEMTEST + +#define CONFIG_BOOTDELAY 1 /* negative for no autoboot */ +#define CONFIG_ENV_VARS_UBOOT_CONFIG +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG +#define CONFIG_EXTRA_ENV_SETTINGS \ + "loadaddr=0x80200000\0" \ + "rdaddr=0x81000000\0" \ + "bootfile=/boot/uImage\0" \ + "console=ttyO0,115200n8\0" \ + "optargs=\0" \ + "mmcdev=0\0" \ + "mmcroot=/dev/mmcblk0p2 rw\0" \ + "mmcrootfstype=ext4 rootwait\0" \ + "ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=${rdaddr},64M\0" \ + "ramrootfstype=ext2\0" \ + "mmcargs=setenv bootargs console=${console} " \ + "${optargs} " \ + "root=${mmcroot} " \ + "rootfstype=${mmcrootfstype}\0" \ + "bootenv=uEnv.txt\0" \ + "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ + "importbootenv=echo Importing environment from mmc ...; " \ + "env import -t $loadaddr $filesize\0" \ + "ramargs=setenv bootargs console=${console} " \ + "${optargs} " \ + "root=${ramroot} " \ + "rootfstype=${ramrootfstype}\0" \ + "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \ + "loaduimagefat=load mmc ${mmcdev} ${loadaddr} ${bootfile}\0" \ + "loaduimage=load mmc ${mmcdev}:2 ${loadaddr} ${bootfile}\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "bootm ${loadaddr}\0" \ + "ramboot=echo Booting from ramdisk ...; " \ + "run ramargs; " \ + "bootm ${loadaddr}\0" \ + +#define CONFIG_BOOTCOMMAND \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ + "echo SD/MMC found on device ${mmcdev};" \ + "if run loadbootenv; then " \ + "echo Loaded environment from ${bootenv};" \ + "run importbootenv;" \ + "fi;" \ + "if test -n $uenvcmd; then " \ + "echo Running uenvcmd ...;" \ + "run uenvcmd;" \ + "fi;" \ + "if run loaduimage; then " \ + "run mmcboot;" \ + "fi;" \ + "fi;" \ + +/* Max number of command args */ +#define CONFIG_SYS_MAXARGS 16 + +/* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 512 + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ + + sizeof(CONFIG_SYS_PROMPT) + 16) + +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */ +#define CONFIG_SYS_HZ 1000 /* 1ms clock */ + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ +#define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */ +#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ + +#define CONFIG_SYS_SDRAM_BASE PHYS_DRAM_1 +#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ + GENERATED_GBL_DATA_SIZE) +/* Platform/Board specific defs */ +#define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ +#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ +#define CONFIG_SYS_HZ 1000 + +/* NS16550 Configuration */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK (48000000) +#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* UART0 */ + +#define CONFIG_SERIAL_MULTI +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 + +/* CPU */ +#define CONFIG_ARCH_CPU_INIT + +#define CONFIG_ENV_OVERWRITE 1 +#define CONFIG_SYS_CONSOLE_INFO_QUIET + +/* MMC support */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_OMAP_HSMMC +#define CONFIG_DOS_PARTITION + +/* GPIO support */ +#define CONFIG_OMAP_GPIO + +/* Ethernet support */ +#define CONFIG_DRIVER_TI_CPSW +#define CONFIG_MII +#define CONFIG_BOOTP_DEFAULT +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_NET_RETRY_COUNT 10 +#define CONFIG_NET_MULTI +#define CONFIG_PHYLIB +#define CONFIG_PHY_ADDR 0 +#define CONFIG_PHY_SMSC + +/* NAND support */ +#define CONFIG_NAND +#define CONFIG_NAND_OMAP_GPMC +#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 +#define CONFIG_SYS_NAND_BASE (0x08000000) /* phys address CS0 */ +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_ONFI_DETECTION 1 +#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */ + +#define CONFIG_MTD_PARTITIONS +#define CONFIG_MTD_DEVICE +#define CONFIG_RBTREE +#define CONFIG_LZO + +#define MTDIDS_DEFAULT "nand0=nand" +#define MTDPARTS_DEFAULT "mtdparts=nand:512k(SPL),"\ + "1m(U-Boot),128k(U-Boot Env),"\ + "5m(Kernel),-(File System)" + +/* Unsupported features */ +#undef CONFIG_USE_IRQ + +/* Defines for SPL */ +#define CONFIG_SPL +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_TEXT_BASE 0x402F0400 +#define CONFIG_SPL_MAX_SIZE (101 * 1024) +#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR + +#define CONFIG_SPL_BSS_START_ADDR 0x80000000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ + +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ +#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 +#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SPL_FAT_SUPPORT +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBDISK_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_GPIO_SUPPORT +#define CONFIG_SPL_YMODEM_SUPPORT +#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds" + +#define CONFIG_SPL_BOARD_INIT +#define CONFIG_SPL_NAND_AM33XX_BCH +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_NAND_BASE +#define CONFIG_SPL_NAND_DRIVERS +#define CONFIG_SPL_NAND_ECC +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ + CONFIG_SYS_NAND_PAGE_SIZE) +#define CONFIG_SYS_NAND_PAGE_SIZE 2048 +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) +#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS +#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ + 10, 11, 12, 13, 14, 15, 16, 17, \ + 18, 19, 20, 21, 22, 23, 24, 25, \ + 26, 27, 28, 29, 30, 31, 32, 33, \ + 34, 35, 36, 37, 38, 39, 40, 41, \ + 42, 43, 44, 45, 46, 47, 48, 49, \ + 50, 51, 52, 53, 54, 55, 56, 57, } + +#define CONFIG_SYS_NAND_ECCSIZE 512 +#define CONFIG_SYS_NAND_ECCBYTES 14 + +#define CONFIG_SYS_NAND_ECCSTEPS 4 +#define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \ + CONFIG_SYS_NAND_ECCSTEPS) + +#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE + +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 + +/* + * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM + * 64 bytes before this address should be set aside for u-boot.img's + * header. That is 0x800FFFC0--0x80100000 should not be used for any + * other needs. + */ +#define CONFIG_SYS_TEXT_BASE 0x80800000 +#define CONFIG_SYS_SPL_MALLOC_START 0x80208000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 + +/* + * Since SPL did pll and ddr initialization for us, + * we don't need to do it twice. + */ +#ifndef CONFIG_SPL_BUILD +#define CONFIG_SKIP_LOWLEVEL_INIT +#endif + +#endif /* ! __CONFIG_IGEP0033_H */ diff --git a/include/configs/ima3-mx53.h b/include/configs/ima3-mx53.h index c663700..327a866 100644 --- a/include/configs/ima3-mx53.h +++ b/include/configs/ima3-mx53.h @@ -26,7 +26,6 @@ /* SOC type must be included before imx-regs.h */ #define CONFIG_MX53 #include <asm/arch/imx-regs.h> -#include <asm/arch/mx5x_pins.h> #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO @@ -79,8 +78,6 @@ /* SPI FLASH - not used for environment */ #define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO -#define CONFIG_SPI_FLASH_CS (IOMUX_TO_GPIO(MX53_PIN_CSI0_D11) \ - << 8) | 0 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #define CONFIG_SF_DEFAULT_SPEED 25000000 diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h index 4ce4058..5b3fa43 100644 --- a/include/configs/m28evk.h +++ b/include/configs/m28evk.h @@ -77,6 +77,7 @@ #define CONFIG_CMD_SF #define CONFIG_CMD_SPI #define CONFIG_CMD_USB +#define CONFIG_VIDEO #define CONFIG_REGEX /* Enable regular expression support */ @@ -271,6 +272,24 @@ #endif /* + * LCD + */ +#ifdef CONFIG_VIDEO +#define CONFIG_CFB_CONSOLE +#define CONFIG_VIDEO_MXS +#define CONFIG_VIDEO_LOGO +#define CONFIG_VIDEO_SW_CURSOR +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_SPLASH_SCREEN +#define CONFIG_CMD_BMP +#define CONFIG_BMP_16BPP +#define CONFIG_VIDEO_BMP_RLE8 +#define CONFIG_VIDEO_BMP_GZIP +#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (512 << 10) +#endif + +/* * Boot Linux */ #define CONFIG_CMDLINE_TAG diff --git a/include/configs/m53evk.h b/include/configs/m53evk.h new file mode 100644 index 0000000..8403d51 --- /dev/null +++ b/include/configs/m53evk.h @@ -0,0 +1,256 @@ +/* + * DENX M53 configuration + * Copyright (C) 2012-2013 Marek Vasut <marex@denx.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __M53EVK_CONFIG_H__ +#define __M53EVK_CONFIG_H__ + +#define CONFIG_MX53 +#define CONFIG_MXC_GPIO +#define CONFIG_SYS_HZ 1000 + +#include <asm/arch/imx-regs.h> + +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_REVISION_TAG +#define CONFIG_SYS_NO_FLASH + +/* + * U-Boot Commands + */ +#include <config_cmd_default.h> +#define CONFIG_DISPLAY_BOARDINFO +#define CONFIG_DOS_PARTITION + +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_MMC +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_SATA +#define CONFIG_CMD_USB + +/* + * Memory configurations + */ +#define CONFIG_NR_DRAM_BANKS 2 +#define PHYS_SDRAM_1 CSD0_BASE_ADDR +#define PHYS_SDRAM_1_SIZE (512 * 1024 * 1024) +#define PHYS_SDRAM_2 CSD1_BASE_ADDR +#define PHYS_SDRAM_2_SIZE (512 * 1024 * 1024) +#define PHYS_SDRAM_SIZE (PHYS_SDRAM_1_SIZE + PHYS_SDRAM_2_SIZE) +#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) +#define CONFIG_SYS_MEMTEST_START 0x70000000 +#define CONFIG_SYS_MEMTEST_END 0xaff00000 + +#define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1) +#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR) +#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE) + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +#define CONFIG_SYS_TEXT_BASE 0x71000000 + +/* + * U-Boot general configurations + */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_PROMPT "=> " +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */ +#define CONFIG_SYS_PBSIZE \ + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) + /* Print buffer size */ +#define CONFIG_SYS_MAXARGS 32 /* Max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + /* Boot argument buffer size */ +#define CONFIG_VERSION_VARIABLE /* U-BOOT version */ +#define CONFIG_AUTO_COMPLETE /* Command auto complete */ +#define CONFIG_CMDLINE_EDITING /* Command history etc */ +#define CONFIG_SYS_HUSH_PARSER + +/* + * Serial Driver + */ +#define CONFIG_MXC_UART +#define CONFIG_MXC_UART_BASE UART2_BASE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 + +/* + * MMC Driver + */ +#ifdef CONFIG_CMD_MMC +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_FSL_ESDHC_NUM 1 +#endif + +/* + * NAND + */ +#define CONFIG_ENV_SIZE (16 * 1024) +#ifdef CONFIG_CMD_NAND +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR_AXI +#define CONFIG_NAND_MXC +#define CONFIG_MXC_NAND_REGS_BASE NFC_BASE_ADDR_AXI +#define CONFIG_MXC_NAND_IP_REGS_BASE NFC_BASE_ADDR +#define CONFIG_SYS_NAND_LARGEPAGE +#define CONFIG_MXC_NAND_HWECC +#define CONFIG_SYS_NAND_USE_FLASH_BBT + +/* Environment is in NAND */ +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE +#define CONFIG_ENV_SECT_SIZE (128 * 1024) +#define CONFIG_ENV_RANGE (512 * 1024) +#define CONFIG_ENV_OFFSET 0x100000 +#define CONFIG_ENV_OFFSET_REDUND \ + (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE) + +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS +#define CONFIG_CMD_MTDPARTS +#define CONFIG_RBTREE +#define CONFIG_LZO +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS +#define MTDIDS_DEFAULT "nand0=mxc-nand" +#define MTDPARTS_DEFAULT \ + "mtdparts=mxc-nand:" \ + "1m(bootloader)ro," \ + "512k(environment)," \ + "512k(redundant-environment)," \ + "4m(kernel)," \ + "128k(fdt)," \ + "8m(ramdisk)," \ + "-(filesystem)" +#else +#define CONFIG_ENV_IS_NOWHERE +#endif + +/* + * Ethernet on SOC (FEC) + */ +#ifdef CONFIG_CMD_NET +#define CONFIG_FEC_MXC +#define IMX_FEC_BASE FEC_BASE_ADDR +#define CONFIG_FEC_MXC_PHYADDR 0x0 +#define CONFIG_MII +#define CONFIG_DISCOVER_PHY +#define CONFIG_FEC_XCV_TYPE RMII +#define CONFIG_PHYLIB +#define CONFIG_PHY_MICREL +#endif + +/* + * I2C + */ +#ifdef CONFIG_CMD_I2C +#define CONFIG_HARD_I2C +#define CONFIG_I2C_MXC +#define CONFIG_SYS_I2C_BASE I2C2_BASE_ADDR +#define CONFIG_SYS_I2C_SPEED 100000 +#endif + +/* + * RTC + */ +#ifdef CONFIG_CMD_DATE +#define CONFIG_RTC_M41T62 +#define CONFIG_SYS_I2C_RTC_ADDR 0x68 +#define CONFIG_SYS_M41T11_BASE_YEAR 2000 +#endif + +/* + * USB + */ +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_MX5 +#define CONFIG_USB_STORAGE +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX +#define CONFIG_USB_ETHER_SMSC95XX +#define CONFIG_MXC_USB_PORT 1 +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CONFIG_MXC_USB_FLAGS 0 +#endif + +/* + * SATA + */ +#ifdef CONFIG_CMD_SATA +#define CONFIG_DWC_AHSATA +#define CONFIG_SYS_SATA_MAX_DEVICE 1 +#define CONFIG_DWC_AHSATA_PORT_ID 0 +#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_BASE_ADDR +#define CONFIG_LBA48 +#define CONFIG_LIBATA +#endif + +/* + * Boot Linux + */ +#define CONFIG_CMDLINE_TAG +#define CONFIG_INITRD_TAG +#define CONFIG_REVISION_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTFILE "m53evk/uImage" +#define CONFIG_BOOTARGS "console=ttymxc1,115200" +#define CONFIG_LOADADDR 0x70800000 +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#define CONFIG_OF_LIBFDT + +/* + * NAND SPL + */ +#define CONFIG_SPL +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_TARGET "u-boot-with-nand-spl.imx" +#define CONFIG_SPL_BOARD_INIT +#define CONFIG_SPL_TEXT_BASE 0x70008000 +#define CONFIG_SPL_PAD_TO 0x8000 +#define CONFIG_SPL_STACK 0x70004000 +#define CONFIG_SPL_GPIO_SUPPORT +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT + +#define CONFIG_SYS_NAND_U_BOOT_OFFS CONFIG_SPL_PAD_TO +#define CONFIG_SYS_NAND_PAGE_SIZE 2048 +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SYS_NAND_PAGE_COUNT 64 +#define CONFIG_SYS_NAND_SIZE (256 * 1024 * 1024) +#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 + +#endif /* __M53EVK_CONFIG_H__ */ diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h index af30257..c4f245b 100644 --- a/include/configs/mecp5123.h +++ b/include/configs/mecp5123.h @@ -275,7 +275,7 @@ /* * IIM - IC Identification Module */ -#undef CONFIG_IIM +#undef CONFIG_FSL_IIM /* * EEPROM configuration diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h index 6e6af62..64ce52d 100644 --- a/include/configs/mpc5121ads.h +++ b/include/configs/mpc5121ads.h @@ -370,7 +370,7 @@ /* * IIM - IC Identification Module */ -#undef CONFIG_IIM +#undef CONFIG_FSL_IIM /* * EEPROM configuration diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h index 3747955..54d01f9 100644 --- a/include/configs/mx28evk.h +++ b/include/configs/mx28evk.h @@ -63,6 +63,7 @@ #define CONFIG_CMD_USB #define CONFIG_CMD_BOOTZ #define CONFIG_CMD_NAND +#define CONFIG_CMD_NAND_TRIMFFS /* Memory configurations */ #define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */ diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index cb3d938..13d1839 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -53,6 +53,9 @@ /* * Hardware drivers */ +#define CONFIG_FSL_IIM +#define CONFIG_CMD_FUSE + #define CONFIG_MXC_UART #define CONFIG_MXC_UART_BASE UART1_BASE #define CONFIG_MXC_GPIO @@ -149,32 +152,66 @@ #define CONFIG_ETHPRIME "FEC0" -#define CONFIG_LOADADDR 0x90800000 /* loadaddr env var */ +#define CONFIG_LOADADDR 0x92000000 /* loadaddr env var */ #define CONFIG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "uimage=uImage\0" \ + "fdt_file=imx51-babbage.dtb\0" \ + "fdt_addr=0x91000000\0" \ + "boot_fdt=try\0" \ + "ip_dyn=yes\0" \ "mmcdev=0\0" \ "mmcpart=2\0" \ - "mmcroot=/dev/mmcblk0p3 rw\0" \ - "mmcrootfstype=ext3 rootwait\0" \ + "mmcroot=/dev/mmcblk0p3 rootwait rw\0" \ "mmcargs=setenv bootargs console=ttymxc0,${baudrate} " \ - "root=${mmcroot} " \ - "rootfstype=${mmcrootfstype}\0" \ + "root=${mmcroot}\0" \ "loadbootscript=" \ "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ "bootscript=echo Running bootscript from mmc ...; " \ "source\0" \ "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \ + "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ - "bootm\0" \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if run loadfdt; then " \ + "bootm ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootm; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootm; " \ + "fi;\0" \ "netargs=setenv bootargs console=ttymxc0,${baudrate} " \ "root=/dev/nfs " \ "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ "netboot=echo Booting from net ...; " \ "run netargs; " \ - "dhcp ${uimage}; bootm\0" \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "${get_cmd} ${uimage}; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ + "bootm ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootm; " \ + "else " \ + "echo ERROR: Cannot load the DT; " \ + "exit; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootm; " \ + "fi;\0" #define CONFIG_BOOTCOMMAND \ "mmc dev ${mmcdev}; if mmc rescan; then " \ diff --git a/include/configs/mx53ard.h b/include/configs/mx53ard.h index 148f7a2..41974b1 100644 --- a/include/configs/mx53ard.h +++ b/include/configs/mx53ard.h @@ -34,6 +34,7 @@ #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG +#define CONFIG_REVISION_TAG /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) @@ -90,6 +91,7 @@ #include <config_cmd_default.h> #undef CONFIG_CMD_IMLS +#define CONFIG_CMD_SETEXPR #define CONFIG_BOOTDELAY 3 @@ -100,45 +102,98 @@ #define CONFIG_SMC911X_16_BIT #define CONFIG_SMC911X_BASE CS1_BASE_ADDR -#define CONFIG_LOADADDR 0x70800000 /* loadaddr env var */ +#define CONFIG_LOADADDR 0x72000000 /* loadaddr env var */ #define CONFIG_SYS_TEXT_BASE 0x77800000 +#define CONFIG_DEFAULT_FDT_FILE "imx53-ard.dtb" + #define CONFIG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "uimage=uImage\0" \ - "mmcdev=0\0" \ - "mmcpart=2\0" \ - "mmcroot=/dev/mmcblk0p3 rw\0" \ - "mmcrootfstype=ext3 rootwait\0" \ - "mmcargs=setenv bootargs console=ttymxc0,${baudrate} " \ - "root=${mmcroot} " \ - "rootfstype=${mmcrootfstype}\0" \ + "console=ttymxc0\0" \ + "fdt_high=0xffffffff\0" \ + "initrd_high=0xffffffff\0" \ + "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ + "fdt_addr=0x71000000\0" \ + "boot_fdt=try\0" \ + "ip_dyn=yes\0" \ + "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ + "mmcpart=" __stringify(CONFIG_SYS_MMC_ENV_PART) "\0" \ + "mmcroot=/dev/mmcblk0p3 rootwait rw\0" \ + "update_sd_firmware_filename=u-boot.imx\0" \ + "update_sd_firmware=" \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "if mmc dev ${mmcdev}; then " \ + "if ${get_cmd} ${update_sd_firmware_filename}; then " \ + "setexpr fw_sz ${filesize} / 0x200; " \ + "setexpr fw_sz ${fw_sz} + 1; " \ + "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ + "fi; " \ + "fi\0" \ + "mmcargs=setenv bootargs console=${console},${baudrate} " \ + "root=${mmcroot}\0" \ "loadbootscript=" \ "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ "bootscript=echo Running bootscript from mmc ...; " \ "source\0" \ "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \ + "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ - "bootm\0" \ - "netargs=setenv bootargs console=ttymxc0,${baudrate} " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if run loadfdt; then " \ + "bootm ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootm; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootm; " \ + "fi;\0" \ + "netargs=setenv bootargs console=${console},${baudrate} " \ "root=/dev/nfs " \ - "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ - "netboot=echo Booting from net ...; " \ + "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ + "netboot=echo Booting from net ...; " \ "run netargs; " \ - "dhcp ${uimage}; bootm\0" \ - -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ "else " \ - "if run loaduimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ + "setenv get_cmd tftp; " \ "fi; " \ - "else run netboot; fi" + "${get_cmd} ${uimage}; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ + "bootm ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootm; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootm; " \ + "fi;\0" + +#define CONFIG_BOOTCOMMAND \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "else run netboot; " \ + "fi; " \ + "fi; " \ + "else run netboot; fi" + #define CONFIG_ARP_TIMEOUT 200UL /* Miscellaneous configurable options */ @@ -185,6 +240,7 @@ #define CONFIG_ENV_SIZE (8 * 1024) #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_SYS_MMC_ENV_PART 2 #define CONFIG_OF_LIBFDT diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h index a0af3ee..822b926 100644 --- a/include/configs/mx53evk.h +++ b/include/configs/mx53evk.h @@ -34,6 +34,7 @@ #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG +#define CONFIG_REVISION_TAG #define CONFIG_OF_LIBFDT diff --git a/include/configs/mx53smd.h b/include/configs/mx53smd.h index 9e83319..942949d 100644 --- a/include/configs/mx53smd.h +++ b/include/configs/mx53smd.h @@ -34,6 +34,7 @@ #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG +#define CONFIG_REVISION_TAG /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h index b333937..674bcd3 100644 --- a/include/configs/mx6_common.h +++ b/include/configs/mx6_common.h @@ -17,6 +17,7 @@ #ifndef __MX6_COMMON_H #define __MX6_COMMON_H +#define CONFIG_ARM_ERRATA_742230 #define CONFIG_ARM_ERRATA_743622 #define CONFIG_ARM_ERRATA_751472 diff --git a/include/configs/mx6qsabre_common.h b/include/configs/mx6qsabre_common.h index f5f115f..7298a76 100644 --- a/include/configs/mx6qsabre_common.h +++ b/include/configs/mx6qsabre_common.h @@ -78,6 +78,7 @@ #define CONFIG_CMD_BMODE #define CONFIG_CMD_BOOTZ +#define CONFIG_CMD_SETEXPR #undef CONFIG_CMD_IMLS #define CONFIG_BOOTDELAY 1 @@ -98,6 +99,19 @@ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ "mmcpart=" __stringify(CONFIG_SYS_MMC_ENV_PART) "\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ + "update_sd_firmware=" \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "if mmc dev ${mmcdev}; then " \ + "if ${get_cmd} ${update_sd_firmware_filename}; then " \ + "setexpr fw_sz ${filesize} / 0x200; " \ + "setexpr fw_sz ${fw_sz} + 1; " \ + "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ + "fi; " \ + "fi\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ "root=${mmcroot}\0" \ "loadbootscript=" \ diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h index 6d4b837..b814418 100644 --- a/include/configs/mx6qsabrelite.h +++ b/include/configs/mx6qsabrelite.h @@ -47,6 +47,11 @@ #define CONFIG_MISC_INIT_R #define CONFIG_MXC_GPIO +#define CONFIG_CMD_FUSE +#ifdef CONFIG_CMD_FUSE +#define CONFIG_MXC_OCOTP +#endif + #define CONFIG_MXC_UART #define CONFIG_MXC_UART_BASE UART2_BASE diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h new file mode 100644 index 0000000..8a94efd --- /dev/null +++ b/include/configs/mx6slevk.h @@ -0,0 +1,189 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * Configuration settings for the Freescale i.MX6SL EVK board. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/arch/imx-regs.h> +#include <asm/sizes.h> + +#define CONFIG_MX6 +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#define MACH_TYPE_MX6SLEVK 4307 +#define CONFIG_MACH_TYPE MACH_TYPE_MX6SLEVK + +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_REVISION_TAG + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (3 * SZ_1M) + +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_MXC_GPIO + +#define CONFIG_MXC_UART +#define CONFIG_MXC_UART_BASE UART1_IPS_BASE_ADDR + +/* MMC Configs */ +#define CONFIG_FSL_ESDHC +#define CONFIG_FSL_USDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 + +#define CONFIG_MMC +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 + +/* Command definition */ +#include <config_cmd_default.h> + +#undef CONFIG_CMD_IMLS + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_LOADADDR 0x80800000 +#define CONFIG_SYS_TEXT_BASE 0x87800000 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "script=boot.scr\0" \ + "uimage=uImage\0" \ + "console=ttymxc0\0" \ + "fdt_high=0xffffffff\0" \ + "initrd_high=0xffffffff\0" \ + "fdt_file=imx6sl-evk.dtb\0" \ + "fdt_addr=0x81000000\0" \ + "boot_fdt=try\0" \ + "ip_dyn=yes\0" \ + "mmcdev=0\0" \ + "mmcpart=2\0" \ + "mmcroot=/dev/mmcblk0p3 rootwait rw\0" \ + "mmcargs=setenv bootargs console=${console},${baudrate} " \ + "root=${mmcroot}\0" \ + "loadbootscript=" \ + "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ + "bootscript=echo Running bootscript from mmc ...; " \ + "source\0" \ + "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \ + "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if run loadfdt; then " \ + "bootm ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootm; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootm; " \ + "fi;\0" \ + "netargs=setenv bootargs console=${console},${baudrate} " \ + "root=/dev/nfs " \ + "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ + "netboot=echo Booting from net ...; " \ + "run netargs; " \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "${get_cmd} ${uimage}; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ + "bootm ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootm; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootm; " \ + "fi;\0" + +#define CONFIG_BOOTCOMMAND \ + "mmc dev ${mmcdev};" \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "else run netboot; " \ + "fi; " \ + "fi; " \ + "else run netboot; fi" + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT "=> " +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_CBSIZE 256 + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_SYS_MEMTEST_START 0x80000000 +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + SZ_512M) + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_CMDLINE_EDITING +#define CONFIG_STACKSIZE SZ_128K + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR +#define PHYS_SDRAM_SIZE SZ_1G + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* FLASH and environment organization */ +#define CONFIG_SYS_NO_FLASH + +#define CONFIG_ENV_OFFSET (6 * SZ_64K) +#define CONFIG_ENV_SIZE SZ_8K +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 + +#define CONFIG_OF_LIBFDT +#define CONFIG_CMD_BOOTZ + +#ifndef CONFIG_SYS_DCACHE_OFF +#define CONFIG_CMD_CACHE +#endif + +#endif /* __CONFIG_H */ diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index 93e7fe4..aea91bc 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -44,6 +44,11 @@ #define CONFIG_MISC_INIT_R #define CONFIG_MXC_GPIO +#define CONFIG_CMD_FUSE +#ifdef CONFIG_CMD_FUSE +#define CONFIG_MXC_OCOTP +#endif + #define CONFIG_MXC_UART #define CONFIG_MXC_UART_BASE UART2_BASE diff --git a/include/configs/omap3_mvblx.h b/include/configs/omap3_mvblx.h index 376a3d0..f9adc01 100644 --- a/include/configs/omap3_mvblx.h +++ b/include/configs/omap3_mvblx.h @@ -273,7 +273,7 @@ #endif /* (CONFIG_CMD_NET) */ #define CONFIG_FPGA_COUNT 1 -#define CONFIG_FPGA CONFIG_SYS_ALTERA_CYCLON2 +#define CONFIG_FPGA #define CONFIG_FPGA_ALTERA #define CONFIG_FPGA_CYCLON2 #define CONFIG_SYS_FPGA_PROG_FEEDBACK diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h index 1fd3097..d6448b0 100644 --- a/include/configs/omap4_common.h +++ b/include/configs/omap4_common.h @@ -87,6 +87,10 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ 115200} + +/* CPU */ +#define CONFIG_ARCH_CPU_INIT + /* I2C */ #define CONFIG_HARD_I2C 1 #define CONFIG_SYS_I2C_SPEED 100000 @@ -176,7 +180,9 @@ "if test $board_name = sdp4430; then " \ "setenv fdtfile omap4-sdp.dtb; fi; " \ "if test $board_name = panda; then " \ - "setenv fdtfile omap4-panda-es.dtb; fi\0" \ + "setenv fdtfile omap4-panda.dtb; fi;" \ + "if test $board_name = panda-es; then " \ + "setenv fdtfile omap4-panda-es.dtb; fi; \0" \ "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ #define CONFIG_BOOTCOMMAND \ diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h index eacb5f5..abf586b 100644 --- a/include/configs/omap4_panda.h +++ b/include/configs/omap4_panda.h @@ -66,4 +66,6 @@ #define CONFIG_SYS_PROMPT "Panda # " +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + #endif /* __CONFIG_PANDA_H */ diff --git a/include/configs/omap5_common.h b/include/configs/omap5_common.h index c21c387..deb5e9f 100644 --- a/include/configs/omap5_common.h +++ b/include/configs/omap5_common.h @@ -86,6 +86,9 @@ #define CONFIG_BAUDRATE 115200 +/* CPU */ +#define CONFIG_ARCH_CPU_INIT + /* I2C */ #define CONFIG_HARD_I2C #define CONFIG_SYS_I2C_SPEED 100000 @@ -150,10 +153,12 @@ "usbtty=cdc_acm\0" \ "vram=16M\0" \ "partitions=" PARTS_DEFAULT "\0" \ + "optargs=\0" \ "mmcdev=0\0" \ "mmcroot=/dev/mmcblk0p2 rw\0" \ "mmcrootfstype=ext4 rootwait\0" \ "mmcargs=setenv bootargs console=${console} " \ + "${optargs} " \ "vram=${vram} " \ "root=${mmcroot} " \ "rootfstype=${mmcrootfstype}\0" \ diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h index 550cabd..9e0339b 100644 --- a/include/configs/omap5_uevm.h +++ b/include/configs/omap5_uevm.h @@ -37,7 +37,7 @@ /* TWL6035 */ #ifndef CONFIG_SPL_BUILD -#define CONFIG_TWL6035_POWER +#define CONFIG_PALMAS_POWER #endif /* MMC ENV related defines */ @@ -56,4 +56,5 @@ #define CONFIG_SYS_PROMPT "OMAP5430 EVM # " +#define CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC 16296 #endif /* __CONFIG_OMAP5_EVM_H */ diff --git a/include/configs/pcm051.h b/include/configs/pcm051.h index d0ea74e..478f805 100644 --- a/include/configs/pcm051.h +++ b/include/configs/pcm051.h @@ -20,6 +20,7 @@ #define __CONFIG_PCM051_H #define CONFIG_AM33XX +#define CONFIG_OMAP #include <asm/arch/omap.h> @@ -129,7 +130,6 @@ + (8 * 1024 * 1024)) #define CONFIG_SYS_LOAD_ADDR 0x80007fc0 /* Default load address */ -#define CONFIG_SYS_HZ 1000 /* 1ms clock */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC @@ -158,13 +158,12 @@ /* Platform/Board specific defs */ #define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 +#define CONFIG_SYS_HZ 1000 /* 1ms clock */ #define CONFIG_CONS_INDEX 1 /* NS16550 Configuration */ #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SERIAL_MULTI #define CONFIG_SYS_NS16550_REG_SIZE (-4) #define CONFIG_SYS_NS16550_CLK (48000000) #define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */ @@ -194,6 +193,9 @@ #define CONFIG_SYS_BAUDRATE_TABLE { 110, 300, 600, 1200, 2400, \ 4800, 9600, 14400, 19200, 28800, 38400, 56000, 57600, 115200 } +/* CPU */ +#define CONFIG_ARCH_CPU_INIT + #define CONFIG_ENV_OVERWRITE #define CONFIG_SYS_CONSOLE_INFO_QUIET diff --git a/include/configs/pdm360ng.h b/include/configs/pdm360ng.h index 306abcc..db95cb0 100644 --- a/include/configs/pdm360ng.h +++ b/include/configs/pdm360ng.h @@ -341,6 +341,11 @@ #define CONFIG_SYS_I2C_SLAVE 0x7F /* + * IIM - IC Identification Module + */ +#undef CONFIG_FSL_IIM + +/* * EEPROM configuration */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* 16-bit EEPROM addr */ @@ -402,6 +407,8 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_REGINFO +#undef CONFIG_CMD_FUSE + #ifdef CONFIG_VIDEO #define CONFIG_CMD_BMP #endif diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h new file mode 100644 index 0000000..c13e983 --- /dev/null +++ b/include/configs/sama5d3xek.h @@ -0,0 +1,245 @@ +/* + * Configuation settings for the SAMA5D3xEK board. + * + * Copyright (C) 2012 - 2013 Atmel + * + * based on at91sam9m10g45ek.h by: + * Stelian Pop <stelian@popies.net> + * Lead Tech Design <www.leadtechdesign.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/hardware.h> + +#define CONFIG_SYS_TEXT_BASE 0x26f00000 + +/* ARM asynchronous clock */ +#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 +#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_AT91FAMILY +#define CONFIG_ARCH_CPU_INIT + +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_DISPLAY_CPUINFO + +#define CONFIG_CMD_BOOTZ +#define CONFIG_OF_LIBFDT /* Device Tree support */ + +/* general purpose I/O */ +#define CONFIG_AT91_GPIO + +/* serial console */ +#define CONFIG_ATMEL_USART +#define CONFIG_USART_BASE ATMEL_BASE_DBGU +#define CONFIG_USART_ID ATMEL_ID_DBGU + +/* + * This needs to be defined for the OHCI code to work but it is defined as + * ATMEL_ID_UHPHS in the CPU specific header files. + */ +#define ATMEL_ID_UHP ATMEL_ID_UHPHS + +/* + * Specify the clock enable bit in the PMC_SCER register. + */ +#define ATMEL_PMC_UHP AT91SAM926x_PMC_UHP + +/* LCD */ +#define CONFIG_LCD +#define LCD_BPP LCD_COLOR16 +#define LCD_OUTPUT_BPP 24 +#define CONFIG_LCD_LOGO +#undef LCD_TEST_PATTERN +#define CONFIG_LCD_INFO +#define CONFIG_LCD_INFO_BELOW_LOGO +#define CONFIG_SYS_WHITE_ON_BLACK +#define CONFIG_ATMEL_HLCD +#define CONFIG_ATMEL_LCD_RGB565 +#define CONFIG_SYS_CONSOLE_IS_IN_ENV + +/* board specific (not enough SRAM) */ +#define CONFIG_SAMA5D3_LCD_BASE 0x23E00000 + +#define CONFIG_BOOTDELAY 3 + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* No NOR flash */ +#define CONFIG_SYS_NO_FLASH + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_IMI +#undef CONFIG_CMD_LOADS +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP + +/* SDRAM */ +#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS +#define CONFIG_SYS_SDRAM_SIZE 0x20000000 + +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) + +/* SerialFlash */ +#define CONFIG_CMD_SF + +#ifdef CONFIG_CMD_SF +#define CONFIG_ATMEL_SPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_ATMEL +#define CONFIG_SF_DEFAULT_SPEED 30000000 +#endif + +/* NAND flash */ +#define CONFIG_CMD_NAND + +#ifdef CONFIG_CMD_NAND +#define CONFIG_NAND_MAX_CHIPS 1 +#define CONFIG_NAND_ATMEL +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 +/* our ALE is AD21 */ +#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) +/* our CLE is AD22 */ +#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) +#define CONFIG_SYS_NAND_ONFI_DETECTION +/* PMECC & PMERRLOC */ +#define CONFIG_ATMEL_NAND_HWECC +#define CONFIG_ATMEL_NAND_HW_PMECC +#define CONFIG_PMECC_CAP 4 +#define CONFIG_PMECC_SECTOR_SIZE 512 +#define CONFIG_PMECC_INDEX_TABLE_OFFSET ATMEL_PMECC_INDEX_OFFSET_512 +#define CONFIG_CMD_NAND_TRIMFFS +#endif + +/* Ethernet Hardware */ +#define CONFIG_MACB +#define CONFIG_RMII +#define CONFIG_NET_MULTI +#define CONFIG_NET_RETRY_COUNT 20 +#define CONFIG_MACB_SEARCH_PHY + +/* MMC */ +#define CONFIG_CMD_MMC + +#ifdef CONFIG_CMD_MMC +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_GENERIC_ATMEL_MCI +#define ATMEL_BASE_MMCI ATMEL_BASE_MCI0 +#endif + +/* USB */ +#define CONFIG_CMD_USB + +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_ATMEL +#define CONFIG_USB_OHCI_NEW +#define CONFIG_SYS_USB_OHCI_CPU_INIT +#define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_BASE_OHCI +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "sama5d3" +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 3 +#define CONFIG_DOS_PARTITION +#define CONFIG_USB_STORAGE +#endif + +#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC) +#define CONFIG_CMD_FAT +#endif + +#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ + +#ifdef CONFIG_SYS_USE_SERIALFLASH +/* bootstrap + u-boot + env + linux in serial flash */ +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_OFFSET 0x5000 +#define CONFIG_ENV_SIZE 0x3000 +#define CONFIG_ENV_SECT_SIZE 0x1000 +#define CONFIG_BOOTCOMMAND "sf probe 0; " \ + "sf read 0x22000000 0x42000 0x300000; " \ + "bootm 0x22000000" +#elif CONFIG_SYS_USE_NANDFLASH +/* bootstrap + u-boot + env in nandflash */ +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET 0xc0000 +#define CONFIG_ENV_OFFSET_REDUND 0x100000 +#define CONFIG_ENV_SIZE 0x20000 +#define CONFIG_BOOTCOMMAND "nand read 0x21000000 0x180000 0x80000;" \ + "nand read 0x22000000 0x200000 0x600000;" \ + "bootm 0x22000000 - 0x21000000" +#elif CONFIG_SYS_USE_MMC +/* bootstrap + u-boot + env in sd card */ +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_ENV_OFFSET 0x2000 +#define CONFIG_ENV_SIZE 0x1000 +#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 dtb; " \ + "fatload mmc 0:1 0x22000000 uImage; " \ + "bootm 0x22000000 - 0x21000000" +#define CONFIG_SYS_MMC_ENV_DEV 0 +#else +#define CONIG_ENV_IS_NOWHERE +#endif + +#ifdef CONFIG_SYS_USE_MMC +#define CONFIG_BOOTARGS \ + "console=ttyS0,115200 earlyprintk " \ + "root=/dev/mmcblk0p2 rw rootwait" +#else +#define CONFIG_BOOTARGS \ + "console=ttyS0,115200 earlyprintk " \ + "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ + "256K(env),256k(evn_redundent),256k(spare)," \ + "512k(dtb),6M(kernel)ro,-(rootfs) " \ + "rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs" +#endif + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_SYS_PROMPT "U-Boot> " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_LONGHELP +#define CONFIG_CMDLINE_EDITING +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_HUSH_PARSER + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) + +#endif diff --git a/include/configs/tegra-common-post.h b/include/configs/tegra-common-post.h index bf18699..6ed2fde 100644 --- a/include/configs/tegra-common-post.h +++ b/include/configs/tegra-common-post.h @@ -157,6 +157,8 @@ /* overrides for SPL build here */ #ifdef CONFIG_SPL_BUILD +#define CONFIG_SKIP_LOWLEVEL_INIT + /* remove devicetree support */ #ifdef CONFIG_OF_CONTROL #undef CONFIG_OF_CONTROL diff --git a/include/configs/tegra114-common.h b/include/configs/tegra114-common.h index c2986d8..721b29c 100644 --- a/include/configs/tegra114-common.h +++ b/include/configs/tegra114-common.h @@ -74,8 +74,6 @@ #define CONFIG_SYS_SPL_MALLOC_START 0x80090000 #define CONFIG_SPL_STACK 0x800ffffc -#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/tegra114/u-boot-spl.lds" - /* Total I2C ports on Tegra114 */ #define TEGRA_I2C_NUM_CONTROLLERS 5 diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h index 395a657..d5abecb 100644 --- a/include/configs/tegra20-common.h +++ b/include/configs/tegra20-common.h @@ -88,8 +88,6 @@ #define CONFIG_SYS_SPL_MALLOC_START 0x00090000 #define CONFIG_SPL_STACK 0x000ffffc -#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/tegra20/u-boot-spl.lds" - /* Align LCD to 1MB boundary */ #define CONFIG_LCD_ALIGNMENT MMU_SECTION_SIZE diff --git a/include/configs/tegra30-common.h b/include/configs/tegra30-common.h index f6c07c6..ed36e11 100644 --- a/include/configs/tegra30-common.h +++ b/include/configs/tegra30-common.h @@ -87,8 +87,6 @@ #define CONFIG_SYS_SPL_MALLOC_START 0x80090000 #define CONFIG_SPL_STACK 0x800ffffc -#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/tegra30/u-boot-spl.lds" - /* Total I2C ports on Tegra30 */ #define TEGRA_I2C_NUM_CONTROLLERS 5 diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h index 16547e3..eac5ad0 100644 --- a/include/configs/ti814x_evm.h +++ b/include/configs/ti814x_evm.h @@ -19,6 +19,7 @@ #define CONFIG_TI81XX #define CONFIG_TI814X #define CONFIG_SYS_NO_FLASH +#define CONFIG_OMAP #include <asm/arch/omap.h> @@ -162,6 +163,9 @@ #define CONFIG_BAUDRATE 115200 +/* CPU */ +#define CONFIG_ARCH_CPU_INIT + #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 #define CONFIG_SYS_CONSOLE_INFO_QUIET @@ -218,4 +222,25 @@ /* Unsupported features */ #undef CONFIG_USE_IRQ +/* Ethernet */ +#define CONFIG_CMD_NET +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING +#define CONFIG_CMD_MII +#define CONFIG_DRIVER_TI_CPSW +#define CONFIG_MII +#define CONFIG_BOOTP_DEFAULT +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_NET_RETRY_COUNT 10 +#define CONFIG_NET_MULTI +#define CONFIG_PHY_GIGE +#define CONFIG_PHYLIB +#define CONFIG_PHY_ADDR 1 +#define CONFIG_PHY_ET1011C +#define CONFIG_PHY_ET1011C_TX_CLK_FIX + #endif /* ! __CONFIG_TI814X_EVM_H */ diff --git a/include/configs/titanium.h b/include/configs/titanium.h new file mode 100644 index 0000000..41e4513 --- /dev/null +++ b/include/configs/titanium.h @@ -0,0 +1,277 @@ +/* + * Copyright (C) 2013 Stefan Roese <sr@denx.de> + * + * Configuration settings for the ProjectionDesign / Barco + * Titanium board. + * + * Based on mx6qsabrelite.h which is: + * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/arch/imx-regs.h> +#include <asm/imx-common/gpio.h> + +#define CONFIG_MX6 +#define CONFIG_MX6Q +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#define MACH_TYPE_TITANIUM 3769 +#define CONFIG_MACH_TYPE MACH_TYPE_TITANIUM + +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_REVISION_TAG + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (2 * 1024 * 1024) + +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_MISC_INIT_R +#define CONFIG_MXC_GPIO + +#define CONFIG_MXC_UART +#define CONFIG_MXC_UART_BASE UART1_BASE + +/* I2C Configs */ +#define CONFIG_CMD_I2C +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_I2C_MXC +#define CONFIG_SYS_I2C_SPEED 100000 + +/* MMC Configs */ +#define CONFIG_FSL_ESDHC +#define CONFIG_FSL_USDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_FSL_USDHC_NUM 1 + +#define CONFIG_MMC +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_BOUNCE_BUFFER +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION + +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_FEC_MXC +#define CONFIG_MII +#define IMX_FEC_BASE ENET_BASE_ADDR +#define CONFIG_FEC_XCV_TYPE RGMII +#define CONFIG_FEC_MXC_PHYADDR 4 +#define CONFIG_PHYLIB +#define CONFIG_PHY_MICREL +#define CONFIG_PHY_MICREL_KSZ9021 + +/* USB Configs */ +#define CONFIG_CMD_USB +#define CONFIG_CMD_FAT +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_MX6 +#define CONFIG_USB_STORAGE +#define CONFIG_MXC_USB_PORT 1 +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CONFIG_MXC_USB_FLAGS 0 + +/* Miscellaneous commands */ +#define CONFIG_CMD_BMODE + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 + +/* Command definition */ +#include <config_cmd_default.h> + +#undef CONFIG_CMD_IMLS + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_LOADADDR 0x12000000 +#define CONFIG_SYS_TEXT_BASE 0x17800000 + +#define CONFIG_SYS_MEMTEST_START 0x10000000 +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (500 << 20)) + +#define CONFIG_HOSTNAME titanium +#define CONFIG_UBI_PART ubi +#define CONFIG_UBIFS_VOLUME rootfs0 + +#define MTDIDS_DEFAULT "nand0=gpmi-nand" +#define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:16M(uboot),512k(env1)," \ + "512k(env2),-(ubi)" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "kernel=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \ + "kernel_fs=/boot/uImage\0" \ + "kernel_addr=11000000\0" \ + "dtb=" __stringify(CONFIG_HOSTNAME) "/" \ + __stringify(CONFIG_HOSTNAME) ".dtb\0" \ + "dtb_fs=/boot/" __stringify(CONFIG_HOSTNAME) ".dtb\0" \ + "dtb_addr=12800000\0" \ + "script=boot.scr\0" \ + "uimage=uImage\0" \ + "console=ttymxc0\0" \ + "baudrate=115200\0" \ + "fdt_high=0xffffffff\0" \ + "initrd_high=0xffffffff\0" \ + "mmcdev=0\0" \ + "mmcpart=1\0" \ + "uimage=uImage\0" \ + "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}" \ + " ${script}\0" \ + "bootscript=echo Running bootscript from mmc ...; source\0" \ + "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \ + "mmcroot=/dev/mmcblk0p2\0" \ + "mmcargs=setenv bootargs console=${console},${baudrate} " \ + "root=${mmcroot} rootwait rw\0" \ + "bootmmc=run mmcargs; fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}" \ + " ${uimage}; bootm\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addcon=setenv bootargs ${bootargs} console=ttymxc0," \ + "${baudrate}\0" \ + "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ + "rootpath=/opt/eldk-5.3/armv7a/rootfs-minimal-mtdutils\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ubifs=" __stringify(CONFIG_HOSTNAME) "/ubifs.img\0" \ + "part=" __stringify(CONFIG_UBI_PART) "\0" \ + "boot_vol=0\0" \ + "vol=" __stringify(CONFIG_UBIFS_VOLUME) "\0" \ + "load_ubifs=tftp ${kernel_addr} ${ubifs}\0" \ + "update_ubifs=ubi part ${part};ubi write ${kernel_addr} ${vol}" \ + " ${filesize}\0" \ + "upd_ubifs=run load_ubifs update_ubifs\0" \ + "init_ubi=nand erase.part ubi;ubi part ${part};" \ + "ubi create ${vol} c800000\0" \ + "mtdids=" MTDIDS_DEFAULT "\0" \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ + "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip" \ + " addcon addmtd;" \ + "bootm ${kernel_addr} - ${dtb_addr}\0" \ + "ubifsargs=set bootargs ubi.mtd=ubi " \ + "root=ubi:rootfs${boot_vol} rootfstype=ubifs\0" \ + "ubifs_mount=ubi part ubi;ubifsmount ubi:rootfs${boot_vol}\0" \ + "ubifs_load=ubifsload ${kernel_addr} ${kernel_fs};" \ + "ubifsload ${dtb_addr} ${dtb_fs};\0" \ + "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip addcon " \ + "addmtd;bootm ${kernel_addr} - ${dtb_addr}\0" \ + "load_kernel=tftp ${kernel_addr} ${kernel}\0" \ + "load_dtb=tftp ${dtb_addr} ${dtb}\0" \ + "net_nfs=run load_dtb load_kernel; " \ + "run nfsargs addip addcon addmtd;" \ + "bootm ${kernel_addr} - ${dtb_addr}\0" \ + "delenv=env default -a -f; saveenv; reset\0" + +#define CONFIG_BOOTCOMMAND "run nand_ubifs" + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT "Titanium > " +#define CONFIG_AUTO_COMPLETE +#define CONFIG_CMDLINE_EDITING +#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */ + +#define CONFIG_SYS_CBSIZE 256 + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#define CONFIG_SYS_HZ 1000 + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR +#define PHYS_SDRAM_SIZE (512 << 20) + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* FLASH and environment organization */ +#define CONFIG_SYS_NO_FLASH + +/* Enable NAND support */ +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NAND_TRIMFFS +#define CONFIG_CMD_TIME + +#ifdef CONFIG_CMD_NAND + +/* NAND stuff */ +#define CONFIG_NAND_MXS +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0x40000000 +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_ONFI_DETECTION + +/* DMA stuff, needed for GPMI/MXS NAND support */ +#define CONFIG_APBH_DMA +#define CONFIG_APBH_DMA_BURST +#define CONFIG_APBH_DMA_BURST8 + +/* Environment in NAND */ +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET (16 << 20) +#define CONFIG_ENV_SECT_SIZE (128 << 10) +#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (512 << 10)) +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE + +#else /* CONFIG_CMD_NAND */ + +/* Environment in MMC */ +#define CONFIG_ENV_SIZE (8 << 10) +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_ENV_OFFSET (6 * 64 * 1024) +#define CONFIG_SYS_MMC_ENV_DEV 0 + +#endif /* CONFIG_CMD_NAND */ + +/* UBI/UBIFS config options */ +#define CONFIG_LZO +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS +#define CONFIG_RBTREE +#define CONFIG_CMD_MTDPARTS +#define CONFIG_CMD_UBI +#define CONFIG_CMD_UBIFS + +#define CONFIG_OF_LIBFDT +#define CONFIG_CMD_BOOTZ + +#ifndef CONFIG_SYS_DCACHE_OFF +#define CONFIG_CMD_CACHE +#endif + +#endif /* __CONFIG_H */ diff --git a/include/configs/tnetv107x_evm.h b/include/configs/tnetv107x_evm.h index d6371fc..cabc06e 100644 --- a/include/configs/tnetv107x_evm.h +++ b/include/configs/tnetv107x_evm.h @@ -82,8 +82,8 @@ #define CONFIG_SYS_NAND_CS 2 #define CONFIG_SYS_NAND_USE_FLASH_BBT #define CONFIG_SYS_NAND_BASE TNETV107X_ASYNC_EMIF_DATA_CE0_BASE -#define CONFIG_SYS_CLE_MASK 0x10 -#define CONFIG_SYS_ALE_MASK 0x8 +#define CONFIG_SYS_NAND_MASK_CLE 0x10 +#define CONFIG_SYS_NAND_MASK_ALE 0x8 #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_MTD_PARTITIONS #define CONFIG_CMD_MTDPARTS diff --git a/include/configs/vexpress_ca15_tc2.h b/include/configs/vexpress_ca15_tc2.h new file mode 100644 index 0000000..9e230ad --- /dev/null +++ b/include/configs/vexpress_ca15_tc2.h @@ -0,0 +1,36 @@ +/* + * (C) Copyright 2013 Linaro + * Andre Przywara, <andre.przywara@linaro.org> + * + * Configuration for Versatile Express. Parts were derived from other ARM + * configurations. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __VEXPRESS_CA15X2_TC2_h +#define __VEXPRESS_CA15X2_TC2_h + +#define CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP +#include "vexpress_common.h" +#define CONFIG_BOOTP_VCI_STRING "U-boot.armv7.vexpress_ca15x2_tc2" + +#define CONFIG_SYS_CLK_FREQ 24000000 + +#endif diff --git a/include/configs/vexpress_ca5x2.h b/include/configs/vexpress_ca5x2.h new file mode 100644 index 0000000..9331134 --- /dev/null +++ b/include/configs/vexpress_ca5x2.h @@ -0,0 +1,34 @@ +/* + * (C) Copyright 2011 Linaro + * Ryan Harkin, <ryan.harkin@linaro.org> + * + * Configuration for Versatile Express. Parts were derived from other ARM + * configurations. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __VEXPRESS_CA5X2_h +#define __VEXPRESS_CA5X2_h + +#define CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP +#include "vexpress_common.h" +#define CONFIG_BOOTP_VCI_STRING "U-boot.armv7.vexpress_ca5x2" + +#endif /* __VEXPRESS_CA5X2_h */ diff --git a/arch/arm/include/asm/arch-mx25/sys_proto.h b/include/configs/vexpress_ca9x4.h index 46db341..c3b6986 100644 --- a/arch/arm/include/asm/arch-mx25/sys_proto.h +++ b/include/configs/vexpress_ca9x4.h @@ -1,6 +1,9 @@ /* - * (C) Copyright 2009 - * Stefano Babic, DENX Software Engineering, sbabic@denx.de. + * (C) Copyright 2011 Linaro + * Ryan Harkin, <ryan.harkin@linaro.org> + * + * Configuration for Versatile Express. Parts were derived from other ARM + * configurations. * * See file CREDITS for list of people who contributed to this * project. @@ -12,7 +15,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -21,12 +24,11 @@ * MA 02111-1307 USA */ -#ifndef _SYS_PROTO_H_ -#define _SYS_PROTO_H_ +#ifndef __VEXPRESS_CA9X4_H +#define __VEXPRESS_CA9X4_H -void mx25_uart1_init_pins(void); -#if defined CONFIG_FEC_MXC -extern void mx25_fec_init_pins(void); -#endif +#define CONFIG_VEXPRESS_ORIGINAL_MEMORY_MAP +#include "vexpress_common.h" +#define CONFIG_BOOTP_VCI_STRING "U-boot.armv7.vexpress_ca9x4" -#endif +#endif /* VEXPRESS_CA9X4_H */ diff --git a/include/configs/ca9x4_ct_vxp.h b/include/configs/vexpress_common.h index a7cd1d4..3c5683a 100644 --- a/include/configs/ca9x4_ct_vxp.h +++ b/include/configs/vexpress_common.h @@ -1,4 +1,5 @@ /* + * (C) Copyright 2011 ARM Limited * (C) Copyright 2010 Linaro * Matt Waddel, <matt.waddel@linaro.org> * @@ -24,15 +25,113 @@ * MA 02111-1307 USA */ -#ifndef __CONFIG_H -#define __CONFIG_H +#ifndef __VEXPRESS_COMMON_H +#define __VEXPRESS_COMMON_H + +/* + * Definitions copied from linux kernel: + * arch/arm/mach-vexpress/include/mach/motherboard.h + */ +#ifdef CONFIG_VEXPRESS_ORIGINAL_MEMORY_MAP +/* CS register bases for the original memory map. */ +#define V2M_PA_CS0 0x40000000 +#define V2M_PA_CS1 0x44000000 +#define V2M_PA_CS2 0x48000000 +#define V2M_PA_CS3 0x4c000000 +#define V2M_PA_CS7 0x10000000 + +#define V2M_PERIPH_OFFSET(x) (x << 12) +#define V2M_SYSREGS (V2M_PA_CS7 + V2M_PERIPH_OFFSET(0)) +#define V2M_SYSCTL (V2M_PA_CS7 + V2M_PERIPH_OFFSET(1)) +#define V2M_SERIAL_BUS_PCI (V2M_PA_CS7 + V2M_PERIPH_OFFSET(2)) + +#define V2M_BASE 0x60000000 +#define CONFIG_SYS_TEXT_BASE 0x60800000 +#elif defined(CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP) +/* CS register bases for the extended memory map. */ +#define V2M_PA_CS0 0x08000000 +#define V2M_PA_CS1 0x0c000000 +#define V2M_PA_CS2 0x14000000 +#define V2M_PA_CS3 0x18000000 +#define V2M_PA_CS7 0x1c000000 + +#define V2M_PERIPH_OFFSET(x) (x << 16) +#define V2M_SYSREGS (V2M_PA_CS7 + V2M_PERIPH_OFFSET(1)) +#define V2M_SYSCTL (V2M_PA_CS7 + V2M_PERIPH_OFFSET(2)) +#define V2M_SERIAL_BUS_PCI (V2M_PA_CS7 + V2M_PERIPH_OFFSET(3)) + +#define V2M_BASE 0x80000000 +#define CONFIG_SYS_TEXT_BASE 0x80800000 +#endif + +/* + * Physical addresses, offset from V2M_PA_CS0-3 + */ +#define V2M_NOR0 (V2M_PA_CS0) +#define V2M_NOR1 (V2M_PA_CS1) +#define V2M_SRAM (V2M_PA_CS2) +#define V2M_VIDEO_SRAM (V2M_PA_CS3 + 0x00000000) +#define V2M_LAN9118 (V2M_PA_CS3 + 0x02000000) +#define V2M_ISP1761 (V2M_PA_CS3 + 0x03000000) + +/* Common peripherals relative to CS7. */ +#define V2M_AACI (V2M_PA_CS7 + V2M_PERIPH_OFFSET(4)) +#define V2M_MMCI (V2M_PA_CS7 + V2M_PERIPH_OFFSET(5)) +#define V2M_KMI0 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(6)) +#define V2M_KMI1 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(7)) + +#define V2M_UART0 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(9)) +#define V2M_UART1 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(10)) +#define V2M_UART2 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(11)) +#define V2M_UART3 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(12)) + +#define V2M_WDT (V2M_PA_CS7 + V2M_PERIPH_OFFSET(15)) + +#define V2M_TIMER01 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(17)) +#define V2M_TIMER23 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(18)) + +#define V2M_SERIAL_BUS_DVI (V2M_PA_CS7 + V2M_PERIPH_OFFSET(22)) +#define V2M_RTC (V2M_PA_CS7 + V2M_PERIPH_OFFSET(23)) + +#define V2M_CF (V2M_PA_CS7 + V2M_PERIPH_OFFSET(26)) + +#define V2M_CLCD (V2M_PA_CS7 + V2M_PERIPH_OFFSET(31)) +#define V2M_SIZE_CS7 V2M_PERIPH_OFFSET(32) + +/* System register offsets. */ +#define V2M_SYS_CFGDATA (V2M_SYSREGS + 0x0a0) +#define V2M_SYS_CFGCTRL (V2M_SYSREGS + 0x0a4) +#define V2M_SYS_CFGSTAT (V2M_SYSREGS + 0x0a8) + +/* + * Configuration + */ +#define SYS_CFG_START (1 << 31) +#define SYS_CFG_WRITE (1 << 30) +#define SYS_CFG_OSC (1 << 20) +#define SYS_CFG_VOLT (2 << 20) +#define SYS_CFG_AMP (3 << 20) +#define SYS_CFG_TEMP (4 << 20) +#define SYS_CFG_RESET (5 << 20) +#define SYS_CFG_SCC (6 << 20) +#define SYS_CFG_MUXFPGA (7 << 20) +#define SYS_CFG_SHUTDOWN (8 << 20) +#define SYS_CFG_REBOOT (9 << 20) +#define SYS_CFG_DVIMODE (11 << 20) +#define SYS_CFG_POWER (12 << 20) +#define SYS_CFG_SITE_MB (0 << 16) +#define SYS_CFG_SITE_DB1 (1 << 16) +#define SYS_CFG_SITE_DB2 (2 << 16) +#define SYS_CFG_STACK(n) ((n) << 12) + +#define SYS_CFG_ERR (1 << 1) +#define SYS_CFG_COMPLETE (1 << 0) /* Board info register */ -#define SYS_ID 0x10000000 +#define SYS_ID V2M_SYSREGS #define CONFIG_REVISION_TAG 1 -#define CONFIG_SYS_TEXT_BASE 0x60800000 -#define CONFIG_SYS_MEMTEST_START 0x60000000 +#define CONFIG_SYS_MEMTEST_START V2M_BASE #define CONFIG_SYS_MEMTEST_END 0x20000000 #define CONFIG_SYS_HZ 1000 @@ -46,13 +145,13 @@ /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) -#define SCTL_BASE 0x10001000 +#define SCTL_BASE V2M_SYSCTL #define VEXPRESS_FLASHPROG_FLVPPEN (1 << 0) /* SMSC9115 Ethernet from SMSC9118 family */ #define CONFIG_SMC911X 1 #define CONFIG_SMC911X_32_BIT 1 -#define CONFIG_SMC911X_BASE 0x4E000000 +#define CONFIG_SMC911X_BASE V2M_LAN9118 /* PL011 Serial Configuration */ #define CONFIG_PL011_SERIAL @@ -62,8 +161,9 @@ #define CONFIG_CONS_INDEX 0 #define CONFIG_BAUDRATE 38400 -#define CONFIG_SYS_SERIAL0 0x10009000 -#define CONFIG_SYS_SERIAL1 0x1000A000 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CONFIG_SYS_SERIAL0 V2M_UART0 +#define CONFIG_SYS_SERIAL1 V2M_UART1 /* Command line configuration */ #define CONFIG_CMD_BDI @@ -79,6 +179,8 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_SAVEENV #define CONFIG_CMD_RUN +#define CONFIG_CMD_BOOTZ +#define CONFIG_SUPPORT_RAW_INITRD #define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION 1 @@ -86,7 +188,7 @@ #define CONFIG_CMD_MMC #define CONFIG_GENERIC_MMC #define CONFIG_ARM_PL180_MMCI -#define CONFIG_ARM_PL180_MMCI_BASE 0x10005000 +#define CONFIG_ARM_PL180_MMCI_BASE V2M_MMCI #define CONFIG_SYS_MMC_MAX_BLK_COUNT 127 #define CONFIG_ARM_PL180_MMCI_CLOCK_FREQ 6250000 @@ -97,18 +199,18 @@ #define CONFIG_BOOTP_HOSTNAME #define CONFIG_BOOTP_PXE #define CONFIG_BOOTP_PXE_CLIENTARCH 0x100 -#define CONFIG_BOOTP_VCI_STRING "U-boot.armv7.ca9x4_ct_vxp" /* Miscellaneous configurable options */ #undef CONFIG_SYS_CLKS_IN_HZ -#define CONFIG_SYS_LOAD_ADDR 0x60008000 /* load address */ -#define LINUX_BOOT_PARAM_ADDR 0x60000200 +#define CONFIG_SYS_LOAD_ADDR (V2M_BASE + 0x8000) +#define LINUX_BOOT_PARAM_ADDR (V2M_BASE + 0x2000) #define CONFIG_BOOTDELAY 2 /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 -#define PHYS_SDRAM_1 0x60000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_2 0x80000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1 (V2M_BASE) /* SDRAM Bank #1 */ +#define PHYS_SDRAM_2 (((unsigned int)V2M_BASE) + \ + ((unsigned int)0x20000000)) #define PHYS_SDRAM_1_SIZE 0x20000000 /* 512 MB */ #define PHYS_SDRAM_2_SIZE 0x20000000 /* 512 MB */ @@ -122,14 +224,27 @@ /* Basic environment settings */ #define CONFIG_BOOTCOMMAND "run bootflash;" -#define CONFIG_EXTRA_ENV_SETTINGS \ +#ifdef CONFIG_VEXPRESS_ORIGINAL_MEMORY_MAP +#define CONFIG_PLATFORM_ENV_SETTINGS \ "loadaddr=0x80008000\0" \ "ramdisk_addr_r=0x61000000\0" \ "kernel_addr=0x44100000\0" \ "ramdisk_addr=0x44800000\0" \ "maxramdisk=0x1800000\0" \ "pxefile_addr_r=0x88000000\0" \ - "kernel_addr_r=0x80008000\0" \ + "kernel_addr_r=0x80008000\0" +#elif defined(CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP) +#define CONFIG_PLATFORM_ENV_SETTINGS \ + "loadaddr=0xa0008000\0" \ + "ramdisk_addr_r=0x81000000\0" \ + "kernel_addr=0x0c100000\0" \ + "ramdisk_addr=0x0c800000\0" \ + "maxramdisk=0x1800000\0" \ + "pxefile_addr_r=0xa8000000\0" \ + "kernel_addr_r=0xa0008000\0" +#endif +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_PLATFORM_ENV_SETTINGS \ "console=ttyAMA0,38400n8\0" \ "dram=1024M\0" \ "root=/dev/sda1 rw\0" \ @@ -148,8 +263,8 @@ #define CONFIG_FLASH_CFI_DRIVER 1 #define CONFIG_SYS_FLASH_SIZE 0x04000000 #define CONFIG_SYS_MAX_FLASH_BANKS 2 -#define CONFIG_SYS_FLASH_BASE0 0x40000000 -#define CONFIG_SYS_FLASH_BASE1 0x44000000 +#define CONFIG_SYS_FLASH_BASE0 V2M_NOR0 +#define CONFIG_SYS_FLASH_BASE1 V2M_NOR1 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE0 /* Timeout values in ticks */ @@ -189,10 +304,12 @@ #define CONFIG_SYS_PROMPT "VExpress# " #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_HUSH_PARSER + #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */ #define CONFIG_CMD_SOURCE #define CONFIG_SYS_LONGHELP #define CONFIG_CMDLINE_EDITING 1 #define CONFIG_SYS_MAXARGS 16 /* max command args */ -#endif +#endif /* VEXPRESS_COMMON_H */ diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h index 120e3f6..9d7ec3f 100644 --- a/include/configs/wandboard.h +++ b/include/configs/wandboard.h @@ -32,6 +32,7 @@ #define CONFIG_SYS_MALLOC_LEN (3 * SZ_1M) #define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_LATE_INIT #define CONFIG_MXC_GPIO #define CONFIG_MXC_UART @@ -47,6 +48,9 @@ #undef CONFIG_CMD_IMLS +#define CONFIG_CMD_BMODE +#define CONFIG_CMD_SETEXPR + #define CONFIG_BOOTDELAY 5 #define CONFIG_SYS_MEMTEST_START 0x10000000 @@ -57,6 +61,7 @@ /* MMC Configuration */ #define CONFIG_FSL_ESDHC #define CONFIG_FSL_USDHC +#define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 #define CONFIG_MMC @@ -97,9 +102,23 @@ "fdt_addr=0x11000000\0" \ "boot_fdt=try\0" \ "ip_dyn=yes\0" \ - "mmcdev=0\0" \ - "mmcpart=2\0" \ + "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ + "mmcpart=" __stringify(CONFIG_SYS_MMC_ENV_PART) "\0" \ "mmcroot=/dev/mmcblk0p3 rootwait rw\0" \ + "update_sd_firmware_filename=u-boot.imx\0" \ + "update_sd_firmware=" \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "if mmc dev ${mmcdev}; then " \ + "if ${get_cmd} ${update_sd_firmware_filename}; then " \ + "setexpr fw_sz ${filesize} / 0x200; " \ + "setexpr fw_sz ${fw_sz} + 1; " \ + "mmc write ${loadaddr} 0x2 ${fw_sz}; " \ + "fi; " \ + "fi\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ "root=${mmcroot}\0" \ "loadbootscript=" \ @@ -198,6 +217,7 @@ #define CONFIG_ENV_IS_IN_MMC #define CONFIG_ENV_OFFSET (6 * 64 * 1024) #define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_SYS_MMC_ENV_PART 2 #define CONFIG_OF_LIBFDT #define CONFIG_CMD_BOOTZ diff --git a/include/configs/zynq.h b/include/configs/zynq.h index 2989e72..38f04f6 100644 --- a/include/configs/zynq.h +++ b/include/configs/zynq.h @@ -50,19 +50,50 @@ #define CONFIG_ZYNQ_SERIAL_BAUDRATE0 CONFIG_BAUDRATE #define CONFIG_ZYNQ_SERIAL_CLOCK0 50000000 -/* SCU timer address is hardcoded */ -#define CONFIG_SCUTIMER_BASEADDR 0xF8F00600 - /* Ethernet driver */ #define CONFIG_NET_MULTI #define CONFIG_ZYNQ_GEM -#define CONFIG_ZYNQ_GEM_BASEADDR0 0xE000B000 +#define CONFIG_ZYNQ_GEM0 +#define CONFIG_ZYNQ_GEM_PHY_ADDR0 7 + +#define CONFIG_ZYNQ_SDHCI +#define CONFIG_ZYNQ_SDHCI0 + +/* MMC */ +#if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1) +# define CONFIG_MMC +# define CONFIG_GENERIC_MMC +# define CONFIG_SDHCI +# define CONFIG_ZYNQ_SDHCI +# define CONFIG_CMD_MMC +# define CONFIG_CMD_FAT +# define CONFIG_SUPPORT_VFAT +# define CONFIG_CMD_EXT2 +# define CONFIG_DOS_PARTITION +#endif + +#define CONFIG_ZYNQ_I2C0 + +/* I2C */ +#if defined(CONFIG_ZYNQ_I2C0) || defined(CONFIG_ZYNQ_I2C1) +# define CONFIG_CMD_I2C +# define CONFIG_ZYNQ_I2C +# define CONFIG_HARD_I2C +# define CONFIG_SYS_I2C_SPEED 100000 +# define CONFIG_SYS_I2C_SLAVE 1 +#endif #if defined(CONFIG_ZYNQ_DCC) # define CONFIG_ARM_DCC # define CONFIG_CPU_V6 /* Required by CONFIG_ARM_DCC */ #endif +/* Enable the PL to be downloaded */ +#define CONFIG_FPGA +#define CONFIG_FPGA_XILINX +#define CONFIG_FPGA_ZYNQPL +#define CONFIG_CMD_FPGA + #define CONFIG_BOOTP_SERVERIP #define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTP_GATEWAY diff --git a/include/fpga.h b/include/fpga.h index 30a4e6a..38e9018 100644 --- a/include/fpga.h +++ b/include/fpga.h @@ -31,16 +31,6 @@ #define CONFIG_MAX_FPGA_DEVICES 5 #endif -/* CONFIG_FPGA bit assignments */ -#define CONFIG_SYS_FPGA_MAN(x) (x) -#define CONFIG_SYS_FPGA_DEV(x) ((x) << 8 ) -#define CONFIG_SYS_FPGA_IF(x) ((x) << 16 ) - -/* FPGA Manufacturer bits in CONFIG_FPGA */ -#define CONFIG_SYS_FPGA_XILINX CONFIG_SYS_FPGA_MAN( 0x1 ) -#define CONFIG_SYS_FPGA_ALTERA CONFIG_SYS_FPGA_MAN( 0x2 ) - - /* fpga_xxxx function return value definitions */ #define FPGA_SUCCESS 0 #define FPGA_FAIL -1 @@ -68,7 +58,10 @@ extern void fpga_init(void); extern int fpga_add(fpga_type devtype, void *desc); extern int fpga_count(void); extern int fpga_load(int devnum, const void *buf, size_t bsize); +extern int fpga_loadbitstream(int devnum, char *fpgadata, size_t size); extern int fpga_dump(int devnum, const void *buf, size_t bsize); extern int fpga_info(int devnum); +extern const fpga_desc *const fpga_validate(int devnum, const void *buf, + size_t bsize, char *fn); #endif /* _FPGA_H_ */ diff --git a/include/fuse.h b/include/fuse.h new file mode 100644 index 0000000..b964137 --- /dev/null +++ b/include/fuse.h @@ -0,0 +1,44 @@ +/* + * (C) Copyright 2009-2013 ADVANSEE + * Benoît Thébaudeau <benoit.thebaudeau@advansee.com> + * + * Based on the mpc512x iim code: + * Copyright 2008 Silicon Turnkey Express, Inc. + * Martha Marx <mmarx@silicontkx.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _FUSE_H_ +#define _FUSE_H_ + +/* + * Read/Sense/Program/Override interface: + * bank: Fuse bank + * word: Fuse word within the bank + * val: Value to read/write + * + * Returns: 0 on success, not 0 on failure + */ +int fuse_read(u32 bank, u32 word, u32 *val); +int fuse_sense(u32 bank, u32 word, u32 *val); +int fuse_prog(u32 bank, u32 word, u32 val); +int fuse_override(u32 bank, u32 word, u32 val); + +#endif /* _FUSE_H_ */ diff --git a/include/lattice.h b/include/lattice.h index 6a2cf93..49871da 100644 --- a/include/lattice.h +++ b/include/lattice.h @@ -278,9 +278,6 @@ typedef struct { char *desc; /* description string */ } Lattice_desc; /* end, typedef Altera_desc */ -/* Lattice Model Type */ -#define CONFIG_SYS_XP2 CONFIG_SYS_FPGA_DEV(0x1) - /* Board specific implementation specific function types */ typedef void (*Lattice_jtag_init)(void); typedef void (*Lattice_jtag_set_tdi)(int v); diff --git a/include/linux/bitrev.h b/include/linux/bitrev.h new file mode 100644 index 0000000..a61d956 --- /dev/null +++ b/include/linux/bitrev.h @@ -0,0 +1,23 @@ +/* + * This file is released under the terms of GPL v2 and any later version. + * See the file COPYING in the root directory of the source tree for details. + * + * Based on bitrev from the Linux kernel, by Akinobu Mita + */ + +#ifndef _LINUX_BITREV_H +#define _LINUX_BITREV_H + +#include <linux/types.h> + +extern u8 const byte_rev_table[256]; + +static inline u8 bitrev8(u8 byte) +{ + return byte_rev_table[byte]; +} + +u16 bitrev16(u16 in); +u32 bitrev32(u32 in); + +#endif /* _LINUX_BITREV_H */ diff --git a/include/linux/mtd/docg4.h b/include/linux/mtd/docg4.h new file mode 100644 index 0000000..982f5ad --- /dev/null +++ b/include/linux/mtd/docg4.h @@ -0,0 +1,134 @@ +/* + * Copyright (C) 2013 Mike Dunn <mikedunn@newsguy.com> + * + * This file is released under the terms of GPL v2 and any later version. + * See the file COPYING in the root directory of the source tree for details. + * + */ + +#ifndef __DOCG4_H__ +#define __DOCG4_H__ + +#include <common.h> +#include <linux/mtd/nand.h> + +extern int docg4_nand_init(struct mtd_info *mtd, + struct nand_chip *nand, int devnum); + +/* SPL-related definitions */ +#define DOCG4_IPL_LOAD_BLOCK_COUNT 2 /* number of blocks that IPL loads */ +#define DOCG4_BLOCK_CAPACITY_SPL 0x10000 /* reliable mode; redundant pages */ + +#define DOC_IOSPACE_DATA 0x0800 + +/* register offsets */ +#define DOC_CHIPID 0x1000 +#define DOC_DEVICESELECT 0x100a +#define DOC_ASICMODE 0x100c +#define DOC_DATAEND 0x101e +#define DOC_NOP 0x103e + +#define DOC_FLASHSEQUENCE 0x1032 +#define DOC_FLASHCOMMAND 0x1034 +#define DOC_FLASHADDRESS 0x1036 +#define DOC_FLASHCONTROL 0x1038 +#define DOC_ECCCONF0 0x1040 +#define DOC_ECCCONF1 0x1042 +#define DOC_HAMMINGPARITY 0x1046 +#define DOC_BCH_SYNDROM(idx) (0x1048 + idx) + +#define DOC_ASICMODECONFIRM 0x1072 +#define DOC_CHIPID_INV 0x1074 +#define DOC_POWERMODE 0x107c + +#define DOCG4_MYSTERY_REG 0x1050 + +/* apparently used only to write oob bytes 6 and 7 */ +#define DOCG4_OOB_6_7 0x1052 + +/* DOC_FLASHSEQUENCE register commands */ +#define DOC_SEQ_RESET 0x00 +#define DOCG4_SEQ_PAGE_READ 0x03 +#define DOCG4_SEQ_FLUSH 0x29 +#define DOCG4_SEQ_PAGEWRITE 0x16 +#define DOCG4_SEQ_PAGEPROG 0x1e +#define DOCG4_SEQ_BLOCKERASE 0x24 + +/* DOC_FLASHCOMMAND register commands */ +#define DOCG4_CMD_PAGE_READ 0x00 +#define DOC_CMD_ERASECYCLE2 0xd0 +#define DOCG4_CMD_FLUSH 0x70 +#define DOCG4_CMD_READ2 0x30 +#define DOC_CMD_PROG_BLOCK_ADDR 0x60 +#define DOCG4_CMD_PAGEWRITE 0x80 +#define DOC_CMD_PROG_CYCLE2 0x10 +#define DOC_CMD_RESET 0xff + +/* DOC_POWERMODE register bits */ +#define DOC_POWERDOWN_READY 0x80 + +/* DOC_FLASHCONTROL register bits */ +#define DOC_CTRL_CE 0x10 +#define DOC_CTRL_UNKNOWN 0x40 +#define DOC_CTRL_FLASHREADY 0x01 + +/* DOC_ECCCONF0 register bits */ +#define DOC_ECCCONF0_READ_MODE 0x8000 +#define DOC_ECCCONF0_UNKNOWN 0x2000 +#define DOC_ECCCONF0_ECC_ENABLE 0x1000 +#define DOC_ECCCONF0_DATA_BYTES_MASK 0x07ff + +/* DOC_ECCCONF1 register bits */ +#define DOC_ECCCONF1_BCH_SYNDROM_ERR 0x80 +#define DOC_ECCCONF1_ECC_ENABLE 0x07 +#define DOC_ECCCONF1_PAGE_IS_WRITTEN 0x20 + +/* DOC_ASICMODE register bits */ +#define DOC_ASICMODE_RESET 0x00 +#define DOC_ASICMODE_NORMAL 0x01 +#define DOC_ASICMODE_POWERDOWN 0x02 +#define DOC_ASICMODE_MDWREN 0x04 +#define DOC_ASICMODE_BDETCT_RESET 0x08 +#define DOC_ASICMODE_RSTIN_RESET 0x10 +#define DOC_ASICMODE_RAM_WE 0x20 + +/* good status values read after read/write/erase operations */ +#define DOCG4_PROGSTATUS_GOOD 0x51 +#define DOCG4_PROGSTATUS_GOOD_2 0xe0 + +/* + * On read operations (page and oob-only), the first byte read from I/O reg is a + * status. On error, it reads 0x73; otherwise, it reads either 0x71 (first read + * after reset only) or 0x51, so bit 1 is presumed to be an error indicator. + */ +#define DOCG4_READ_ERROR 0x02 /* bit 1 indicates read error */ + +/* anatomy of the device */ +#define DOCG4_CHIP_SIZE 0x8000000 +#define DOCG4_PAGE_SIZE 0x200 +#define DOCG4_PAGES_PER_BLOCK 0x200 +#define DOCG4_BLOCK_SIZE (DOCG4_PAGES_PER_BLOCK * DOCG4_PAGE_SIZE) +#define DOCG4_NUMBLOCKS (DOCG4_CHIP_SIZE / DOCG4_BLOCK_SIZE) +#define DOCG4_OOB_SIZE 0x10 +#define DOCG4_CHIP_SHIFT 27 /* log_2(DOCG4_CHIP_SIZE) */ +#define DOCG4_PAGE_SHIFT 9 /* log_2(DOCG4_PAGE_SIZE) */ +#define DOCG4_ERASE_SHIFT 18 /* log_2(DOCG4_BLOCK_SIZE) */ + +/* all but the last byte is included in ecc calculation */ +#define DOCG4_BCH_SIZE (DOCG4_PAGE_SIZE + DOCG4_OOB_SIZE - 1) + +#define DOCG4_USERDATA_LEN 520 /* 512 byte page plus 8 oob avail to user */ + +/* expected values from the ID registers */ +#define DOCG4_IDREG1_VALUE 0x0400 +#define DOCG4_IDREG2_VALUE 0xfbff + +/* primitive polynomial used to build the Galois field used by hw ecc gen */ +#define DOCG4_PRIMITIVE_POLY 0x4443 + +#define DOCG4_M 14 /* Galois field is of order 2^14 */ +#define DOCG4_T 4 /* BCH alg corrects up to 4 bit errors */ + +#define DOCG4_FACTORY_BBT_PAGE 16 /* page where read-only factory bbt lives */ + +#endif /* __DOCG4_H__ */ diff --git a/include/netdev.h b/include/netdev.h index 3bcb337..df454b5 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -103,7 +103,7 @@ int xilinx_emaclite_initialize(bd_t *bis, unsigned long base_addr, int txpp, int rxpp); int xilinx_ll_temac_eth_init(bd_t *bis, unsigned long base_addr, int flags, unsigned long ctrl_addr); -int zynq_gem_initialize(bd_t *bis, int base_addr); +int zynq_gem_initialize(bd_t *bis, int base_addr, int phy_addr, u32 emio); /* * As long as the Xilinx xps_ll_temac ethernet driver has not its own interface * exported by a public hader file, we need a global definition at this point. diff --git a/include/twl6035.h b/include/palmas.h index ce74348..3b18589 100644 --- a/include/twl6035.h +++ b/include/palmas.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2012 + * (C) Copyright 2012-2013 * Texas Instruments, <www.ti.com> * * See file CREDITS for list of people who contributed to this @@ -20,12 +20,14 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ +#ifndef PALMAS_H +#define PALMAS_H #include <common.h> #include <i2c.h> /* I2C chip addresses */ -#define TWL6035_CHIP_ADDR 0x48 +#define PALMAS_CHIP_ADDR 0x48 /* 0x1XY translates to page 1, register address 0xXY */ #define LDO9_CTRL 0x60 @@ -36,7 +38,21 @@ #define LDO_MODE_SLEEP (1 << 2) #define LDO_MODE_ACTIVE (1 << 0) -int twl6035_i2c_write_u8(u8 chip_no, u8 val, u8 reg); -int twl6035_i2c_read_u8(u8 chip_no, u8 *val, u8 reg); -void twl6035_init_settings(void); -int twl6035_mmc1_poweron_ldo(void); +/* + * Functions to read and write from TPS659038/TWL6035/TWL6037 + * or other Palmas family of TI PMICs + */ +static inline int palmas_i2c_write_u8(u8 chip_no, u8 reg, u8 val) +{ + return i2c_write(chip_no, reg, 1, &val, 1); +} + +static inline int palmas_i2c_read_u8(u8 chip_no, u8 reg, u8 *val) +{ + return i2c_read(chip_no, reg, 1, val, 1); +} + +void palmas_init_settings(void); +int palmas_mmc1_poweron_ldo(void); + +#endif /* PALMAS_H */ diff --git a/include/phy.h b/include/phy.h index 44d5eaf..75bf3b4 100644 --- a/include/phy.h +++ b/include/phy.h @@ -225,6 +225,7 @@ int gen10g_discover_mmds(struct phy_device *phydev); int phy_atheros_init(void); int phy_broadcom_init(void); int phy_davicom_init(void); +int phy_et1011c_init(void); int phy_lxt_init(void); int phy_marvell_init(void); int phy_micrel_init(void); diff --git a/include/spl.h b/include/spl.h index b40be80..4bc1dd1 100644 --- a/include/spl.h +++ b/include/spl.h @@ -44,7 +44,6 @@ struct spl_image_info { #define SPL_COPY_PAYLOAD_ONLY 1 extern struct spl_image_info spl_image; -extern u32 *boot_params_ptr; /* SPL common functions */ void preloader_console_init(void); diff --git a/include/twl4030.h b/include/twl4030.h index 5aa1841..569ad27 100644 --- a/include/twl4030.h +++ b/include/twl4030.h @@ -638,12 +638,12 @@ * examples are TWL4030_PM_RECEIVER_VMMC1_DEV_GRP and * TWL4030_LED_LEDEN. */ -static inline int twl4030_i2c_write_u8(u8 chip_no, u8 val, u8 reg) +static inline int twl4030_i2c_write_u8(u8 chip_no, u8 reg, u8 val) { return i2c_write(chip_no, reg, 1, &val, 1); } -static inline int twl4030_i2c_read_u8(u8 chip_no, u8 *val, u8 reg) +static inline int twl4030_i2c_read_u8(u8 chip_no, u8 reg, u8 *val) { return i2c_read(chip_no, reg, 1, val, 1); } diff --git a/include/twl6030.h b/include/twl6030.h index a9fcadb..029b21f 100644 --- a/include/twl6030.h +++ b/include/twl6030.h @@ -21,6 +21,9 @@ * MA 02111-1307 USA */ +#ifndef TWL6030_H +#define TWL6030_H + #include <common.h> #include <i2c.h> @@ -126,6 +129,17 @@ #define GPCH0_LSB 0x57 #define GPCH0_MSB 0x58 +/* Functions to read and write from TWL6030 */ +static inline int twl6030_i2c_write_u8(u8 chip_no, u8 reg, u8 val) +{ + return i2c_write(chip_no, reg, 1, &val, 1); +} + +static inline int twl6030_i2c_read_u8(u8 chip_no, u8 reg, u8 *val) +{ + return i2c_read(chip_no, reg, 1, val, 1); +} + void twl6030_init_battery_charging(void); void twl6030_usb_device_settings(void); void twl6030_start_usb_charging(void); @@ -133,3 +147,5 @@ void twl6030_stop_usb_charging(void); int twl6030_get_battery_voltage(void); int twl6030_get_battery_current(void); void twl6030_power_mmc_init(void); + +#endif /* TWL6030_H */ diff --git a/include/usb/ehci-fsl.h b/include/usb/ehci-fsl.h index a1438d6..29b136d 100644 --- a/include/usb/ehci-fsl.h +++ b/include/usb/ehci-fsl.h @@ -277,10 +277,4 @@ struct usb_ehci { /* Board-specific initialization */ int board_ehci_hcd_init(int port); -/* CPU-specific abstracted-out IOMUX init */ -#ifdef CONFIG_MX51 -void setup_iomux_usb_h1(void); -void setup_iomux_usb_h2(void); -#endif - #endif /* _EHCI_FSL_H */ diff --git a/include/xilinx.h b/include/xilinx.h index 5f25b7a..9a64771 100644 --- a/include/xilinx.h +++ b/include/xilinx.h @@ -27,28 +27,6 @@ #ifndef _XILINX_H_ #define _XILINX_H_ -/* Xilinx Model definitions - *********************************************************************/ -#define CONFIG_SYS_SPARTAN2 CONFIG_SYS_FPGA_DEV( 0x1 ) -#define CONFIG_SYS_VIRTEX_E CONFIG_SYS_FPGA_DEV( 0x2 ) -#define CONFIG_SYS_VIRTEX2 CONFIG_SYS_FPGA_DEV( 0x4 ) -#define CONFIG_SYS_SPARTAN3 CONFIG_SYS_FPGA_DEV( 0x8 ) -#define CONFIG_SYS_XILINX_SPARTAN2 (CONFIG_SYS_FPGA_XILINX | CONFIG_SYS_SPARTAN2) -#define CONFIG_SYS_XILINX_VIRTEX_E (CONFIG_SYS_FPGA_XILINX | CONFIG_SYS_VIRTEX_E) -#define CONFIG_SYS_XILINX_VIRTEX2 (CONFIG_SYS_FPGA_XILINX | CONFIG_SYS_VIRTEX2) -#define CONFIG_SYS_XILINX_SPARTAN3 (CONFIG_SYS_FPGA_XILINX | CONFIG_SYS_SPARTAN3) -/* XXX - Add new models here */ - - -/* Xilinx Interface definitions - *********************************************************************/ -#define CONFIG_SYS_XILINX_IF_SS CONFIG_SYS_FPGA_IF( 0x1 ) /* slave serial */ -#define CONFIG_SYS_XILINX_IF_MS CONFIG_SYS_FPGA_IF( 0x2 ) /* master serial */ -#define CONFIG_SYS_XILINX_IF_SP CONFIG_SYS_FPGA_IF( 0x4 ) /* slave parallel */ -#define CONFIG_SYS_XILINX_IF_JTAG CONFIG_SYS_FPGA_IF( 0x8 ) /* jtag */ -#define CONFIG_SYS_XILINX_IF_MSM CONFIG_SYS_FPGA_IF( 0x10 ) /* master selectmap */ -#define CONFIG_SYS_XILINX_IF_SSM CONFIG_SYS_FPGA_IF( 0x20 ) /* slave selectmap */ - /* Xilinx types *********************************************************************/ typedef enum { /* typedef Xilinx_iface */ @@ -59,6 +37,7 @@ typedef enum { /* typedef Xilinx_iface */ jtag_mode, /* jtag/tap serial (not used ) */ master_selectmap, /* master SelectMap (virtex2) */ slave_selectmap, /* slave SelectMap (virtex2) */ + devcfg, /* devcfg interface (zynq) */ max_xilinx_iface_type /* insert all new types before this */ } Xilinx_iface; /* end, typedef Xilinx_iface */ @@ -68,6 +47,7 @@ typedef enum { /* typedef Xilinx_Family */ Xilinx_VirtexE, /* Virtex-E Family */ Xilinx_Virtex2, /* Virtex2 Family */ Xilinx_Spartan3, /* Spartan-III Family */ + xilinx_zynq, /* Zynq Family */ max_xilinx_type /* insert all new types before this */ } Xilinx_Family; /* end, typedef Xilinx_Family */ @@ -77,6 +57,7 @@ typedef struct { /* typedef Xilinx_desc */ size_t size; /* bytes of data part can accept */ void *iface_fns; /* interface function table */ int cookie; /* implementation specific cookie */ + char *name; /* device name in bitstream */ } Xilinx_desc; /* end, typedef Xilinx_desc */ /* Generic Xilinx Functions diff --git a/include/zynqpl.h b/include/zynqpl.h new file mode 100644 index 0000000..0247ef6 --- /dev/null +++ b/include/zynqpl.h @@ -0,0 +1,59 @@ +/* + * (C) Copyright 2012-2013, Xilinx, Michal Simek + * + * (C) Copyright 2012 + * Joe Hershberger <joe.hershberger@ni.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _ZYNQPL_H_ +#define _ZYNQPL_H_ + +#include <xilinx.h> + +extern int zynq_load(Xilinx_desc *desc, const void *image, size_t size); +extern int zynq_dump(Xilinx_desc *desc, const void *buf, size_t bsize); +extern int zynq_info(Xilinx_desc *desc); + +#define XILINX_ZYNQ_7010 0x2 +#define XILINX_ZYNQ_7020 0x7 +#define XILINX_ZYNQ_7030 0xc +#define XILINX_ZYNQ_7045 0x11 + +/* Device Image Sizes */ +#define XILINX_XC7Z010_SIZE 16669920/8 +#define XILINX_XC7Z020_SIZE 32364512/8 +#define XILINX_XC7Z030_SIZE 47839328/8 +#define XILINX_XC7Z045_SIZE 106571232/8 + +/* Descriptor Macros */ +#define XILINX_XC7Z010_DESC(cookie) \ +{ xilinx_zynq, devcfg, XILINX_XC7Z010_SIZE, NULL, cookie, "7z010" } + +#define XILINX_XC7Z020_DESC(cookie) \ +{ xilinx_zynq, devcfg, XILINX_XC7Z020_SIZE, NULL, cookie, "7z020" } + +#define XILINX_XC7Z030_DESC(cookie) \ +{ xilinx_zynq, devcfg, XILINX_XC7Z030_SIZE, NULL, cookie, "7z030" } + +#define XILINX_XC7Z045_DESC(cookie) \ +{ xilinx_zynq, devcfg, XILINX_XC7Z045_SIZE, NULL, cookie, "7z045" } + +#endif /* _ZYNQPL_H_ */ diff --git a/lib/Makefile b/lib/Makefile index 8f81862..5d58609 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -55,6 +55,7 @@ COBJS-$(CONFIG_SHA256) += sha256.o COBJS-y += strmhz.o COBJS-$(CONFIG_TPM) += tpm.o COBJS-$(CONFIG_RBTREE) += rbtree.o +COBJS-$(CONFIG_BITREVERSE) += bitrev.o endif ifdef CONFIG_SPL_BUILD diff --git a/lib/bitrev.c b/lib/bitrev.c new file mode 100644 index 0000000..160021a --- /dev/null +++ b/lib/bitrev.c @@ -0,0 +1,59 @@ +/* + * This file is released under the terms of GPL v2 and any later version. + * See the file COPYING in the root directory of the source tree for details. + * + * Based on bitrev from the Linux kernel, by Akinobu Mita + */ + + +#include <linux/types.h> +#include <linux/bitrev.h> + +const u8 byte_rev_table[256] = { + 0x00, 0x80, 0x40, 0xc0, 0x20, 0xa0, 0x60, 0xe0, + 0x10, 0x90, 0x50, 0xd0, 0x30, 0xb0, 0x70, 0xf0, + 0x08, 0x88, 0x48, 0xc8, 0x28, 0xa8, 0x68, 0xe8, + 0x18, 0x98, 0x58, 0xd8, 0x38, 0xb8, 0x78, 0xf8, + 0x04, 0x84, 0x44, 0xc4, 0x24, 0xa4, 0x64, 0xe4, + 0x14, 0x94, 0x54, 0xd4, 0x34, 0xb4, 0x74, 0xf4, + 0x0c, 0x8c, 0x4c, 0xcc, 0x2c, 0xac, 0x6c, 0xec, + 0x1c, 0x9c, 0x5c, 0xdc, 0x3c, 0xbc, 0x7c, 0xfc, + 0x02, 0x82, 0x42, 0xc2, 0x22, 0xa2, 0x62, 0xe2, + 0x12, 0x92, 0x52, 0xd2, 0x32, 0xb2, 0x72, 0xf2, + 0x0a, 0x8a, 0x4a, 0xca, 0x2a, 0xaa, 0x6a, 0xea, + 0x1a, 0x9a, 0x5a, 0xda, 0x3a, 0xba, 0x7a, 0xfa, + 0x06, 0x86, 0x46, 0xc6, 0x26, 0xa6, 0x66, 0xe6, + 0x16, 0x96, 0x56, 0xd6, 0x36, 0xb6, 0x76, 0xf6, + 0x0e, 0x8e, 0x4e, 0xce, 0x2e, 0xae, 0x6e, 0xee, + 0x1e, 0x9e, 0x5e, 0xde, 0x3e, 0xbe, 0x7e, 0xfe, + 0x01, 0x81, 0x41, 0xc1, 0x21, 0xa1, 0x61, 0xe1, + 0x11, 0x91, 0x51, 0xd1, 0x31, 0xb1, 0x71, 0xf1, + 0x09, 0x89, 0x49, 0xc9, 0x29, 0xa9, 0x69, 0xe9, + 0x19, 0x99, 0x59, 0xd9, 0x39, 0xb9, 0x79, 0xf9, + 0x05, 0x85, 0x45, 0xc5, 0x25, 0xa5, 0x65, 0xe5, + 0x15, 0x95, 0x55, 0xd5, 0x35, 0xb5, 0x75, 0xf5, + 0x0d, 0x8d, 0x4d, 0xcd, 0x2d, 0xad, 0x6d, 0xed, + 0x1d, 0x9d, 0x5d, 0xdd, 0x3d, 0xbd, 0x7d, 0xfd, + 0x03, 0x83, 0x43, 0xc3, 0x23, 0xa3, 0x63, 0xe3, + 0x13, 0x93, 0x53, 0xd3, 0x33, 0xb3, 0x73, 0xf3, + 0x0b, 0x8b, 0x4b, 0xcb, 0x2b, 0xab, 0x6b, 0xeb, + 0x1b, 0x9b, 0x5b, 0xdb, 0x3b, 0xbb, 0x7b, 0xfb, + 0x07, 0x87, 0x47, 0xc7, 0x27, 0xa7, 0x67, 0xe7, + 0x17, 0x97, 0x57, 0xd7, 0x37, 0xb7, 0x77, 0xf7, + 0x0f, 0x8f, 0x4f, 0xcf, 0x2f, 0xaf, 0x6f, 0xef, + 0x1f, 0x9f, 0x5f, 0xdf, 0x3f, 0xbf, 0x7f, 0xff, +}; + +u16 bitrev16(u16 x) +{ + return (bitrev8(x & 0xff) << 8) | bitrev8(x >> 8); +} + +/** + * bitrev32 - reverse the order of bits in a u32 value + * @x: value to be bit-reversed + */ +u32 bitrev32(u32 x) +{ + return (bitrev16(x & 0xffff) << 16) | bitrev16(x >> 16); +} diff --git a/spl/Makefile b/spl/Makefile index b5a8de7..8b655c4 100644 --- a/spl/Makefile +++ b/spl/Makefile @@ -88,12 +88,20 @@ ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(C LIBS-y += $(CPUDIR)/omap-common/libomap-common.o endif +ifneq (,$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35)) +LIBS-y += arch/$(ARCH)/imx-common/libimx-common.o +endif + ifneq ($(CONFIG_TEGRA),) LIBS-y += arch/$(ARCH)/cpu/$(SOC)-common/lib$(SOC)-common.o LIBS-y += arch/$(ARCH)/cpu/tegra-common/libcputegra-common.o LIBS-y += $(CPUDIR)/tegra-common/libtegra-common.o endif +ifneq ($(CONFIG_MX23)$(CONFIG_MX35),) +LIBS-y += arch/$(ARCH)/imx-common/libimx-common.o +endif + # Add GCC lib ifeq ("$(USE_PRIVATE_LIBGCC)", "yes") PLATFORM_LIBGCC = $(SPLTREE)/arch/$(ARCH)/lib/libgcc.o diff --git a/tools/imximage.c b/tools/imximage.c index fa308c9..5e8e470 100644 --- a/tools/imximage.c +++ b/tools/imximage.c @@ -37,6 +37,7 @@ */ static table_entry_t imximage_cmds[] = { {CMD_BOOT_FROM, "BOOT_FROM", "boot command", }, + {CMD_BOOT_OFFSET, "BOOT_OFFSET", "Boot offset", }, {CMD_DATA, "DATA", "Reg Write Data", }, {CMD_IMAGE_VERSION, "IMAGE_VERSION", "image version", }, {-1, "", "", }, @@ -352,6 +353,11 @@ static void parse_cfg_cmd(struct imx_header *imxhdr, int32_t cmd, char *token, if (unlikely(cmd_ver_first != 1)) cmd_ver_first = 0; break; + case CMD_BOOT_OFFSET: + imxhdr->flash_offset = get_cfg_value(token, name, lineno); + if (unlikely(cmd_ver_first != 1)) + cmd_ver_first = 0; + break; case CMD_DATA: value = get_cfg_value(token, name, lineno); (*set_dcd_val)(imxhdr, name, lineno, fld, value, dcd_len); @@ -518,11 +524,14 @@ static void imximage_set_header(void *ptr, struct stat *sbuf, int ifd, /* * ROM bug alert - * mx53 only loads 512 byte multiples. - * The remaining fraction of a block bytes would - * not be loaded. + * + * MX53 only loads 512 byte multiples in case of SD boot. + * MX53 only loads NAND page multiples in case of NAND boot and + * supports up to 4096 byte large pages, thus align to 4096. + * + * The remaining fraction of a block bytes would not be loaded! */ - *header_size_ptr = ROUND(sbuf->st_size + imxhdr->flash_offset, 512); + *header_size_ptr = ROUND(sbuf->st_size + imxhdr->flash_offset, 4096); } int imximage_check_params(struct mkimage_params *params) diff --git a/tools/imximage.h b/tools/imximage.h index 42b6090..5c929e4 100644 --- a/tools/imximage.h +++ b/tools/imximage.h @@ -31,6 +31,11 @@ #define HEADER_OFFSET 0x400 +/* + * NOTE: This file must be kept in sync with arch/arm/include/asm/\ + * imx-common/imximage.cfg because tools/imximage.c can not + * cross-include headers from arch/arm/ and vice-versa. + */ #define CMD_DATA_STR "DATA" #define FLASH_OFFSET_UNDEFINED 0xFFFFFFFF #define FLASH_OFFSET_STANDARD 0x400 @@ -52,6 +57,7 @@ enum imximage_cmd { CMD_INVALID, CMD_IMAGE_VERSION, CMD_BOOT_FROM, + CMD_BOOT_OFFSET, CMD_DATA }; @@ -151,13 +157,14 @@ typedef struct { dcd_v2_t dcd_table; } imx_header_v2_t; +/* The header must be aligned to 4k on MX53 for NAND boot */ struct imx_header { union { imx_header_v1_t hdr_v1; imx_header_v2_t hdr_v2; } header; uint32_t flash_offset; -}; +} __attribute__((aligned(4096))); typedef void (*set_dcd_val_t)(struct imx_header *imxhdr, char *name, int lineno, diff --git a/tools/mxsboot.c b/tools/mxsboot.c index 6c05aa4..d92c39f 100644 --- a/tools/mxsboot.c +++ b/tools/mxsboot.c @@ -551,7 +551,7 @@ static int mx28_create_sd_image(int infd, int outfd) fsize = lseek(infd, 0, SEEK_END); lseek(infd, 0, SEEK_SET); - size = fsize + 512; + size = fsize + 4 * 512; buf = malloc(size); if (!buf) { @@ -559,7 +559,7 @@ static int mx28_create_sd_image(int infd, int outfd) goto err0; } - ret = read(infd, (uint8_t *)buf + 512, fsize); + ret = read(infd, (uint8_t *)buf + 4 * 512, fsize); if (ret != fsize) { ret = -1; goto err1; @@ -574,8 +574,8 @@ static int mx28_create_sd_image(int infd, int outfd) cb->drv_info[0].chip_num = 0x0; cb->drv_info[0].drive_type = 0x0; cb->drv_info[0].tag = 0x1; - cb->drv_info[0].first_sector_number = sd_sector + 1; - cb->drv_info[0].sector_count = (size - 1) / 512; + cb->drv_info[0].first_sector_number = sd_sector + 4; + cb->drv_info[0].sector_count = (size - 4) / 512; wr_size = write(outfd, buf, size); if (wr_size != size) { |